WorldWideScience

Sample records for students develop productive

  1. Nature-inspired design strategies in sustainable product development : A case study of student projects

    NARCIS (Netherlands)

    De Pauw, I.C.; Karana, E.; Kandachar, P.V.

    2012-01-01

    In design practice, Nature-Inspired Design Strategies (NIDS) can be applied when developing sustainable products. However, knowledge on how this actually helps designers is lacking. This study explores the effects of applying Cradle to Cradle and Biomimicry in student projects, as compared to using

  2. Training mechanical engineering students to utilize biological inspiration during product development.

    Science.gov (United States)

    Bruck, Hugh A; Gershon, Alan L; Golden, Ira; Gupta, Satyandra K; Gyger, Lawrence S; Magrab, Edward B; Spranklin, Brent W

    2007-12-01

    The use of bio-inspiration for the development of new products and devices requires new educational tools for students consisting of appropriate design and manufacturing technologies, as well as curriculum. At the University of Maryland, new educational tools have been developed that introduce bio-inspired product realization to undergraduate mechanical engineering students. These tools include the development of a bio-inspired design repository, a concurrent fabrication and assembly manufacturing technology, a series of undergraduate curriculum modules and a new senior elective in the bio-inspired robotics area. This paper first presents an overview of the two new design and manufacturing technologies that enable students to realize bio-inspired products, and describes how these technologies are integrated into the undergraduate educational experience. Then, the undergraduate curriculum modules are presented, which provide students with the fundamental design and manufacturing principles needed to support bio-inspired product and device development. Finally, an elective bio-inspired robotics project course is present, which provides undergraduates with the opportunity to demonstrate the application of the knowledge acquired through the curriculum modules in their senior year using the new design and manufacturing technologies.

  3. A Method for User Centering Systematic Product Development Aimed at Industrial Design Students

    Science.gov (United States)

    Coelho, Denis A.

    2010-01-01

    Instead of limiting the introduction and stimulus for new concept creation to lists of specifications, industrial design students seem to prefer to be encouraged by ideas in context. A new method that specifically tackles human activity to foster the creation of user centered concepts of new products was developed and is presented in this article.…

  4. The Impact of IQ+EQ+CQ Integration on Student Productivity in Web Design and Development

    Science.gov (United States)

    Zhao, Jensen J.; Zhao, Sherry Y.

    2010-01-01

    As the entry-level information technology jobs could be easily outsourced offshore, the demand for U.S. employees who are innovative and productive in information technology (IT) project design, development, and management is growing among U.S. companies. This controlled experiment presents how a model of integrating students' intelligence…

  5. Students developing resources for students.

    Science.gov (United States)

    Pearce, Michael; Evans, Darrell

    2012-06-01

    The development of new technologies has provided medical education with the ability to enhance the student learning experience and meet the needs of changing curricula. Students quickly adapt to using multimedia learning resources, but these need to be well designed, learner-centred and interactive for students to become significantly engaged. One way to ensure that students become committed users and that resources become distinct elements of the learning cycle is to involve students in resource design and production. Such an approach enables resources to accommodate student needs and preferences, but also provides opportunities for them to develop their own teaching and training skills. The aim of the medical student research project was to design and produce an electronic resource that was focused on a particular anatomical region. The views of other medical students were used to decide what features were suitable for inclusion and the resulting package contained basic principles and clinical relevance, and used a variety of approaches such as images of cadaveric material, living anatomy movies and quizzes. The completed package was assessed using a survey matrix and found to compare well with commercially available products. Given the ever-diversifying arena of multimedia instruction and the ability of students to be fully conversant with technology, this project demonstrates that students are ideal participants and creators of multimedia resources. It is hoped that such an approach will help to further develop the skill base of students, but will also provide an avenue of developing packages that are student user friendly, and that are focused towards particular curricula requirements. © Blackwell Publishing Ltd 2012.

  6. Model development of production management unit to enhance entrepreneurship attitude of vocational school students from fashion department

    Science.gov (United States)

    Sumaryani, Sri

    2018-03-01

    The purpose of this study is to develop a model of production management unit to enhance entrepreneurship attitude of vocational school students from fashion department. This study concerns in developing students' entrepreneurship attitude in management which includes planning, organizing, applying and evaluation. The study uses Research and Development (R & D) approach with three main steps; preliminary study, development step, and product validation. Research subject was vocational school teachers from fashion department in Semarang, Salatiga and Demak. This study yields a development model of production management unit that could enhance vocational school students' entrepreneurship attitude in fashion department. The result shows that research subjects have understood about of production management unit in Vocational School (SMK).

  7. The Role of Live Video Capture Production in the Development of Student Communication Skills

    Science.gov (United States)

    O'Donoghue, Michael; Cochrane, Tom A.

    2010-01-01

    Civil and natural resources engineering students at the University of Canterbury, New Zealand, take specific courses requiring small group research projects and the presentation of findings to staff and peers. Although one of the aims of these presentations is to assist in the development of the students' communication skills, staff have raised…

  8. "I Don't Like Hearing Angel and Not Seeing Her! Why Did We Do That?" An Exploration of Students' Media Literacy Development through Production

    Science.gov (United States)

    Luchs, Michele; Emery, Winston

    2004-01-01

    In this exploratory case study we look at student media production to find out what students know and have learned about the media through production work. We used a media education conceptual framework developed by Dick as a means of describing the day to day media learning of a group of ten students, four girls and six boys, producing a video…

  9. Film as teacher education genre: Developing student agency in the production of #Taximaths – How children make their world mathematical

    Directory of Open Access Journals (Sweden)

    Lara Ragpot

    2014-12-01

    Full Text Available The article reports on the process of producing a film for students in a university course. The purpose of the production was to make local film material that could assist students in their learning of developmental cognitive psychology theory in general, but specifically also the mathematical cognition of children. Although the students in the production team set out as actors and technical helpers, they gradually appropriated their acting roles and the plot of the story to the extent that they learned the theory that the film was portraying. Not only did they show interest in the psychology texts and the story, but they also developed agency – they became the owners of the film. The argument of this paper is that a multimodal foundation in teacher education can give students multiple semiotic entry points, but also, if given the opportunity to make a dramatic film, they can learn the content of mathematical cognition while learning film production. The article argues that contemporary teacher education programmes are by their very nature briefed to be multimodal, because teachers’ work in schools in the 21st century requires more than language text and oral, in-person communication.

  10. The impact of friendship ties on new product development student projects

    DEFF Research Database (Denmark)

    Kylindri, Stamatia; Blanas, George; Tanev, Stoyan

    2013-01-01

    The competition between firms for more effective new product development (NPD) capabilities has posed the research question: what possibilities are there to improve traditional and knowledge based project team organisation by analysing the impact of social relationships between team members......? The authors of this article tested the hypothesis that friendships have a positive impact on project team effectiveness using the cohesion social network metric. The methodology involves a combination of qualitative and quantitative methodologies applicable to social network analysis (SNA) research...

  11. Innovation in Product Development

    DEFF Research Database (Denmark)

    McAloone, Tim C.; Restrepo-Giraldo, John Dairo

    2005-01-01

    The course on Innovation in Product Development attempts to identify and understand the nature of innovation and product development and their important factors. The course takes both a theoretical and a practical approach and employs a mix of lectures, project work and group discussion. Format...... insight. Course content The following aspects of innovation in product development are considered: - Humans and products - Needs and products - Product life - Teams creating products - Products creating business - Product development models - Organising product development - Product development tools...... - The future of product development....

  12. Towards a new curriculum to support the changing front end innovation landscape : Educating engineering students to effectively participate in iterative data-enabled product development processes

    NARCIS (Netherlands)

    van Kollenburg, J.W.M.; Jeedella, Shawhkat Y.; van Kollenburg, P.A.M.; Kargas, Sotirios

    The new generation of Internet of Things product offers exciting opportunities to design and develop highly personal and adaptive products. Engineering students are traditionally not trained to use user data, generated by prototypes, as creative material for ideating the Fuzzy Front End phase of the

  13. New product development warganing : a constructive way to educate design students

    NARCIS (Netherlands)

    Lu, Y.; Luyk - de Visser, I.M.; Simonse, W.L.; Ouden, den P.H.; Brombacher, A.C.

    2008-01-01

    Wargaming is a standard training tool to prepare military officers for real life situations and to help armed forces with developing and testing military plans. Since the mid-1950s, business has also increasingly recognized that the principle of wargaming can be valuable to support planning and

  14. Developing Collaborative Product Development Capabilities

    DEFF Research Database (Denmark)

    Mahnke, Volker; Tran, Yen

    2012-01-01

    innovation strategies’. Our analyses suggest that developing such collaboration capabilities benefits from the search for complementary practices, the combination of learning styles, and the development of weak and strong ties. Results also underscore the crucial importance of co-evolution of multi......Collaborative product development capabilities support a company’s product innovation activities. In the context of the fast fashion sector, this paper examines the development of the product development capabilities (PDC) that align product development capabilities in a dual innovation context......, one, slow paced, where the firm is well established and the other, fast paced, which represents a new competitive arena in which the company competes. To understand the process associated with collaborative capability development, we studied three Scandinavian fashion companies pursuing ‘dual...

  15. Evaluating Students' Perception of Group Work for Mobile Application Development Learning, Productivity, Enjoyment and Confidence in Quality

    Science.gov (United States)

    Powell, Loreen M.; Wimmer, Hayden

    2016-01-01

    Teaching programming and mobile application development concepts can be challenging for instructors; however, teaching an interdisciplinary class with varied skill levels amplifies this challenge. To encompass a broad range of students, many instructors have sought to improve their lessons and methods by experimenting with group/team programming.…

  16. Developing student awareness:

    DEFF Research Database (Denmark)

    Bagger, Bettan; Taylor Kelly, Hélène; Hørdam, Britta

    Danish academic regulations emphasize a dynamic theory- practice relation in the nursing education. The nursing program is based upon the close collaboration and development of the scholastic and clinical spheres. Attempts to improve patient safety emphasize the critical role that the systematic...... reporting of clinical errors can play. This is not only a national but also an international priority as millions of patients worldwide suffer injury or death due to unsafe care. A project in co-operation with clinical practice and University College Sealand’s research and development department attempts...... to optimize the theory-practice connection while developing students’ competencies with respect to the reporting of clinical errors. Quantitative data from the involved students and clinical advisors is collected in order to measure the effect of the intervention. Student knowledge, awareness and experiences...

  17. Global product development

    DEFF Research Database (Denmark)

    Hansen, Zaza Nadja Lee; Ahmed-Kristensen, Saeema

    2011-01-01

    Globalisation has enabled companies to globalise their product development process. Today, everything from manufacturing to R&D can be globally distributed. This has led to a more complex and disintegrated product development process. This paper investigates the impacts companies have experienced...... operational solutions to counteract the negative impacts with varying degrees of success. This paper presents a unique look into global product development through an investigation of its impact on the organisation, the product development process, and the product. Furthermore, it shows the solutions...... as a result of this, and how they have been addressed. Data was collected through case studies of five Danish multinational corporations. The findings showed that the companies experienced several challenges when they globalised their product development process. They consequently implemented various...

  18. Accelerated product development

    NARCIS (Netherlands)

    Langerak, F.; Seth, J.N.; Malhotra, N.K.

    2011-01-01

    Accelerated product development is a competitive strategy that seeks to reduce the development cycle time of new products. However, there has been little theoretical advancement and empirical model testing in the identification of the conditions under which cycle time reduction is appropriate, the

  19. Global product development

    DEFF Research Database (Denmark)

    Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

    2016-01-01

    Selecting key performance indicators in conventional product development is a challenging task for project management and is compound by global product development. Informed from the findings of two in depth case studies conducted with large Danish manufacturing companies, in this paper we develo...

  20. DESIGN VERSUS PRODUCT DEVELOPMENT?

    Directory of Open Access Journals (Sweden)

    Edu Grieco Mazzini Junior

    2015-03-01

    Full Text Available Design or product development? The questioning in relation to the employment of such terminology dates back to possible misconceptions regarding interpretation and approach them. Therefore, it can be stated that there are differences between these two terms? In this context, we highlight two views concerning the origin of the design. The first character creative and based on pre-industrial revolution, based on projective and methodologies directed towards the practice of designing products. And second, where design is understood as an industrial process: the development of new products includes, besides a creative procedure are developed, and symbolic formal solutions for products, but also a technical procedure based on the definition of the requirements concerning the product engineering. Is this the most widely accepted interpretation? theoretical studies were conducted from interpretations of the concept of the design proposed by the International Council of Societies of Industrial Design – ICSDI (2012, and for the characterization of the process of product development, we sought to develop an analogy between these two terminologies and can be proved that the use of one of terminology will not cause deviations of interpretation, since both deal with the life cycle of the product. The main results obtained until now the definition of design proposed by the ICSID where it is characterized as a creative activity focused on the complete life cycle of products is the more approaches of the concept of product development.

  1. The Effect of Learning Strategies Instruction on the Oral Production Development of English Undergraduate Students from the Federal University of Pará: A Case Study

    Directory of Open Access Journals (Sweden)

    Kelly C. M. Gaignoux

    2011-07-01

    Full Text Available This study aims at investigating how learning strategies instruction may enhance the development of oral production. Instruments used to conduct this case study were field notes, questionnaires, interviews and class audio recordings. Seven female third level undergraduate students of the Curso de Letras of the Federal University of Pará were the subjects of this study. Since the oral production is the main concern of most foreign language learners, this investigation aims at contributing to a better understanding of this issue by suggesting that the explicit learning strategies teaching may conduct to more satisfactory outcomes. Results showed that there were changes in the learning strategies repertoire used by participants.

  2. Assessing Digital Student Productions, a Design-Based Research Study on the Development of a Criteria-Based Assessment Tool for Students’ Digital Multimodal Productions

    DEFF Research Database (Denmark)

    Hoffmeyer, Mikkeline; Jensen, Jesper Juellund; Olsen, Marie Veisegaard

    2017-01-01

    Digital multimodal production is becoming increasingly important as a 21st century skill and as a learning condition in school (K-12). Moreover, there is a growing attention to the significance of criteria-based assessment for learning. Nevertheless, assessment of students’ digital multimodal...... productions is often vague or lacking. Therefore, the research project aims at developing a tool to support assessment of student’s digital multimodal productions through a design-based research method. This paper presents a proposal for issues to be considered through a prototyping phase, based on interviews...

  3. Transdisciplinary product development

    Directory of Open Access Journals (Sweden)

    Tomaž Savšek

    2015-12-01

    Full Text Available Research Question (RQ: How can transdisciplinary approach increase the product development process in future industry? Purpose: The aim of the research is to develop a model of an effective product development in the automotive industry based on the transdisciplinary approach. Method: We used a qualitative research approach in order to develop a theoretical framework of transdisciplinarity. The framework comprises the concurrent engineering and experts from different disciplines. The framework was represented by a mathematical model which based on stochastic dynamic programming. Results: We developed a theoretical frameworkand a practical case of transdisciplinary product development in the automotive industry. We presented a mathematical model and information environment which supports such a model. Organization: The findings of the research will provide higher productivity, lower operating costs, change in personnel structure, higher added value, lower sales costs, lower administration costs, reduction in growth of expenses, and lower costs of work equipment. Society: The research impact on higher customer’s satisfaction, increased flexibility of operations, better quality of information, improved control of sources, less waste materials and less pollution, improved planning process, more favourable consideration of employees , improved portfolio management, and better corporate presentation of company. Originality: Transdisciplinary framework combines methods of concurrent engineering and interdisciplinary approach in a process of product development. The development of such a framework is a complete novelty and represents an original approach to product development, which will be particularly suitable for the smart factories of the future. Transdisciplinary framework was transformed in to a mathematical model based on stochastic dynamic programming. Model is supported by the existing information warehouse and represents a potential for

  4. Reconsidering Asian American Student Development

    Science.gov (United States)

    Kodama, Corinne M.; Maramba, Dina C.

    2017-01-01

    This chapter addresses the applicability of student development theories in light of empirical research on Asian American college students through a twofold approach: (a) revisiting the relevance of Kodama, McEwen, Liang, and Lee's (2001, 2002) theoretical work on Asian American student development; and (b) using Jones' and Stewart's (2016)…

  5. A Framework For Product Development

    DEFF Research Database (Denmark)

    McAloone, Timothy Charles; Robotham, Antony John

    1999-01-01

    -aspect approach to product development; understanding the strategic conditions that affect product development; developing a coherent approach to product quality based on product-life thinking; addressing environmental needs in a proactive manner through innovation techniques; and understanding both...

  6. Development of Production Systems

    DEFF Research Database (Denmark)

    Christiansen, Thomas Bøhm

    1997-01-01

    This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by......This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by...

  7. Product development leadership

    DEFF Research Database (Denmark)

    Lindgren, Peter

    2006-01-01

    Peter Lindgren introducerer i sin artikel begrebet ”Product Development Leadership”, som sætter fokus på produktudviklingens strategiske og markedsmæssige rolle. Begrebet omfatter bl.a. virksomhedens evne til at generere eller indfange ideer og udvikle disse via eksisterende eller nye måder...

  8. Sensory Evaluation as a Tool in Determining Acceptability of Innovative Products Developed by Undergraduate Students in Food Science and Technology at the University of Trinidad and Tobago

    Science.gov (United States)

    Singh-Ackbarali, Dimple; Maharaj, Rohanie

    2014-01-01

    This paper discusses the comprehensive and practical training that was delivered to students in a university classroom on how sensory evaluation can be used to determine acceptability of food products. The report presents how students used their training on sensory evaluation methods and analysis and applied it to improving and predicting…

  9. Leadership for product development

    DEFF Research Database (Denmark)

    Martensen, Anne; Dahlgaard, Jens Jørn

    1998-01-01

    by nonrecurring processes. Therefore, the general model requires an amplification and adjustment specific to this area. It will be discussed how the model can be suplemented with references to criterion parts and areas to address, especially relevant for a self-assessment of leadership in innovation. What should...... the criterion "leadership" comprise when the focus is on R and D? Eight new criterion parts will be discussed. It is believed, that the recommended approach will improve leadership for product development. Udgivelsesdato: JUL...

  10. Student Development and Developmental Studies.

    Science.gov (United States)

    Champaigne, John

    1982-01-01

    Reviews the nine-stage Perry Scheme of Intellectual and Ethical Development, detailing three major student orientations--dualism, multiplicity, and commitments in relativism. Suggests techniques developmental educators can use to communicate with, support, and challenge students to promote intellectual development. Underscores the importance of…

  11. DIT - Culinary Student Professional Development

    OpenAIRE

    Seberry, Dermot

    2012-01-01

    A 1 day Culinary Food Tour - For International Masters Degree Students The Aim of the Programme - To explore the trace the source of ingredients linked to 5 major award winning Food Products. Specific Objectives - To meet the food producers behind 5 award winning food products. To investigate the success factors linked to 5 Prominent Artisan Food Producers from the Boyne Valley Region of Ireland.

  12. Internationalizing Student Learning and Development

    Science.gov (United States)

    Roberts, Dennis C.; Komives, Susan R.

    2016-01-01

    Best practices in internationalizing student learning and development require cultural critical analysis before transferring, adapting, hedging, or avoiding existing practices in cross-border applications both in and beyond the classroom.

  13. Students Are Not Products. They Are Customers

    Science.gov (United States)

    Mark, Eddie

    2013-01-01

    This paper explores and challenges the notion that postsecondary students are products of higher education, shaped and molded for the benefit of future employers. The mere suggestion that students are passive in their consumption of educational services would seem to discount the importance of their own educational identity and the broad…

  14. Consumer oriented new product development

    DEFF Research Database (Denmark)

    van Trijp, Hans C.M.; Grunert, Klaus G

    2014-01-01

    New product development is a necessary activity for a company’s competitiveness, profitability and growth. However, new product development is a risky activity as a large percentage of new product introductions fail to achieve their commercial targets. The present chapter reviews the existing evi...... evidence on new product success and failure factors. From that it introduces the perspective of consumer-oriented new product development as a way to balance new technological opportunity against identified consumer needs and desires....

  15. Barriers towards integrated product development

    DEFF Research Database (Denmark)

    Sommer, Anita Friis; Dukovska-Popovska, Iskra; Steger-Jensen, Kenn

    2014-01-01

    The basis for product development in many large industrial companies is a traditional project management method positing non-overlapping phases, independent activities, and a dedicated project team. Research findings indicate that integrated product development methods increase performance compared...

  16. Market-based product development

    DEFF Research Database (Denmark)

    Bisp, Søren; Harmsen, Hanne

    1997-01-01

    A large body of research results on successful product development exists. The results are full of normative advice on how to conduct prod-uct development. At the same time studies have shown that product development practice has only to a very li extent been influenced by these research results...

  17. Micro Products - Product Development and Design

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    Innovation within the field of micro and nano technology is to a great extent characterized by cross-disciplinary skills. The traditional disciplines like e.g. physics, biology, medicine and engineering are united in a common development process that can only take place in the presence of multi......-disciplinary competences. One example is sensors for chemical analysis of fluids, where chemistry, biology and flow mechanics all influence the design of the product and thereby the industrial fabrication of the product [1]. On the technological side the development has moved very fast, primarily driven by the need...... of the electronics industry to create still smaller chips with still larger capacity. Therefore the manufacturing technologies connected with micro/nano products in silicon are relatively highly developed compared to the technologies used for manufacturing micro products in metals, polymers and ceramics. For all...

  18. Graduate Student Project: Operations Management Product Plan

    Science.gov (United States)

    Fish, Lynn

    2007-01-01

    An operations management product project is an effective instructional technique that fills a void in current operations management literature in product planning. More than 94.1% of 286 graduates favored the project as a learning tool, and results demonstrate the significant impact the project had in predicting student performance. The author…

  19. Advancing Student Productivity: An Introduction to Evernote

    Science.gov (United States)

    Korzaan, Melinda; Lawrence, Cameron

    2016-01-01

    This lab exercise exposes students to Evernote, which is a powerful productivity application that has gained significant purchase in professional work environments. In many academic settings the introductory computer applications course has a specific focus on standard productivity applications such as MS Word and MS Excel. While ensuring fluency…

  20. PRODUCTIVITY CHARACTERISTICS AND DEVELOPMENT ...

    African Journals Online (AJOL)

    ACSS

    2016-02-23

    Feb 23, 2016 ... The pulp and kernels of the fruit are the only by-products marketed by women and mainly girls who .... characteristics of trees and fruit involved, 30 adult hermaphrodite ..... Ethnobotanical research and traditional health care in.

  1. Consumer oriented new product development

    DEFF Research Database (Denmark)

    van Trijp, Hans C.M.; Grunert, Klaus G

    2014-01-01

    New product development is a necessary activity for a company’s competitiveness, profitability and growth. However, new product development is a risky activity as a large percentage of new product introductions fail to achieve their commercial targets. The present chapter reviews the existing...

  2. Platform-based production development

    DEFF Research Database (Denmark)

    Bossen, Jacob; Brunoe, Thomas Ditlev; Nielsen, Kjeld

    2015-01-01

    Platforms as a means for applying modular thinking in product development is relatively well studied, but platforms in the production system has until now not been given much attention. With the emerging concept of platform-based co-development the importance of production platforms is though...

  3. Developing Green Line Products

    DEFF Research Database (Denmark)

    Muñoz-Marin, Ana Maria; Lassen, Astrid Heidemann; Poulsen, Søren Bolvig

    2011-01-01

    This publication is based on the Master thesis “User-driven ecoinnovation process: Towards the implementation of the Green product line at JELD-WEN” written by Ana Maria Muñoz-Marin as her Graduation Project for the MSc. Global Innovation Management degree. The company-based experiment was carried...

  4. Environmental tools in product development

    DEFF Research Database (Denmark)

    Wenzel, Henrik; Hauschild, Michael Zwicky; Jørgensen, Jørgen

    1994-01-01

    A precondition for design of environmentally friendly products is that the design team has access to methods and tools supporting the introduction of environmental criteria in product development. A large Danish program, EDIP, is being carried out by the Institute for Product Development, Technical...... University of Denmark, in cooperation with 5 major Danish companies aiming at the development and testing of such tools. These tools are presented in this paper...

  5. Productivity tips for developers

    CERN Multimedia

    CERN. Geneva

    2018-01-01

    I like to read about productivity tools and techniques, but the problem is - most of them are completely overrated, the tips are not that useful or they are too difficult to implement. But, sometimes I can find some stuff that really makes me think "damn, how could I live without this before?!". Today, I would like to share some of them and hopefully hear about the tips and tricks that you use. Maybe we can find a way to share them somehow (github repo/forum)?

  6. Green development within Product families

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Willum, Ole; Frees, Niels

    2000-01-01

    occur, and uncover where the improvement potentials are in the product. The environmental knowledge obtained in this context will be valid for a number of years, and both the producer and other interested parties can use this information for setting priorities in their future planning. However, it can...... be very time consuming to perform an environmental Life Cycle Assessment (LCA), and it would be an advantage if a number of similar products - product families - could be handled in one and the same LCA as a whole. The project has presently developed a method for selecting and forming product families......From 1991 to 1996 the EDIP-methodology (Environmental Design of Industrial Products) was developed. One experience from the EDIP-project is that environmental assessment of products must give simple and operational conclusions, which can be acknowledged in the product development and by other...

  7. Helping Students Develop Listening Comprehension

    Directory of Open Access Journals (Sweden)

    Cárdenas Beltrán Melba Libia

    2000-08-01

    Full Text Available Listening practice is often neglected or handled inappropriately in the teachinglearning process. This poses problem because listening is an integral part of conversations. Oral skills without equally welldeveloped listening abilities are of little practical value. In this article, I will take a look at issues related to the area of listening that may be considered when guiding students toward developing listening comprehension.

  8. First-year University Students' Productive Knowledge of Collocations ...

    African Journals Online (AJOL)

    The present study examines productive knowledge of collocations of tertiary-level second language (L2) learners of English in an attempt to make estimates of the size of their knowledge. Participants involved first-year students at North-West University who sat a collocation test modelled on that developed by Laufer and ...

  9. Student Services and their Influence to Student Development

    Directory of Open Access Journals (Sweden)

    Charlito P. Cadag

    2017-05-01

    Full Text Available he study assessed the effectiveness of student services and their influen ce on student development in the four campuses of Central Bicol State University of Agriculture (CBSUA, SY 2013 - 2014. Descriptive, evaluative, comparative and correlational methods of research were employed. Respondents were administrators, faculty membe rs and student leaders. Data were gathered through questionnaire, interview, documentary analysis and ocular inspection and were treated statistically using weighted mean, ranking, one - way ANOVA, Pearson R correlation analysis and DMRT. Findings revealed t hat the four campuses of CBSUA were ”very effective” in managing the different student services. The social, cultural, political and intellectual aspects of students in the four campuses of CBSUA were “highly developed” through the various student services provided. Student services such as sports development, library, student organizations, arts and culture development, guidance and counseling, scholarship and financial assistance, campus ministry and health services did not vary among campuses.

  10. Customer-driven Product Development

    DEFF Research Database (Denmark)

    Sommer, Anita Friis

    2011-01-01

    look for new ways to gain competitive advantage. In competitive markets there is a tendency of shorter product life cycles, and thus a competitive factor is to keep at pace with the market or even driving the market by developing new products. This research study seeks to investigate Customer......Demand chain management is a research area of increasing attention. It is the undertaking of reacting to customer requirements through a responsive chain going from customers through a focal company towards raw material distributors. With faster growing markets and increasing competition, companies......-driven Product Development (CDPD) from a demand chain management perspective. CDPD is the counterpart to typical research and development processes, which has no direct customer involvement. The proposition is that letting customers initiate and participate in the product development process...

  11. Integrating Product and Technology Development

    DEFF Research Database (Denmark)

    Meijer, Ellen Brilhuis; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

    2016-01-01

    .g. managing dependencies) and opportunities (e.g. streamlining development). This paper presents five existing reference models for technology development (TD), which were identified via a systematic literature review, where their possible integration with product development (PD) reference models......Although dual innovation projects, defined in this article as the concurrent development of products and technologies, often occur in industry, these are only scarcely supported methodologically. Limited research has been done about dual innovation projects and their inherent challenges (e...... was investigated. Based on the specific characteristics desired for dual innovation projects, such as integrated product development and coverage of multiple development stages, a set of selection criteria was employed to select suitable PD and TD reference models. The integration and adaptation of the selected...

  12. Challenges in Introducing New Products: A Case Study on the New Product Development Process

    Science.gov (United States)

    Rankin, Robert; Mintu-Wimsatt, Alma

    2017-01-01

    The case is based on an actual product introduction, and is designed to provide instruction on the new product development process. With the cost to launch new products estimated at least US $15 million and new product failure rates ranging from 40% to 80%, it is imperative that students learn how to determine the financial and market feasibility…

  13. The Student Video Productions Handbook. A Guide to Planning and Teaching Student Video Productions.

    Science.gov (United States)

    Druce, Michael; Walker, Bob, Ed.

    This handbook provides novice video production teachers with a basic course outline containing information, activities, and lessons for use with high school students in an introductory television course. The contents are divided into five major sections: (1) before class begins, (2) preproduction, (3) production, (4) postproduction, and (5) the…

  14. Climate Change Education: Student Media Production to Educate and Engage

    Science.gov (United States)

    Rooney-Varga, J. N.; Brisk, A. A.; Ledley, T. S.; Shuldman, M.

    2011-12-01

    Climate change education offers many challenges, including the complexity of the natural and human systems involved, a need for a multi-disciplinary perspective, and the psychological barriers to learning that result from a problem that frequently elicits a sense of being overwhelmed and powerless. The implications of climate change impacts and/or solutions can be especially overwhelming for today's students, who are likely to be confronted with many projected changes within their lifetimes. We are developing approaches to incorporate video production by students at both the high school and university levels in order to overcome many of the challenges unique to climate change education. Through media production, students are asked to convey complex topics using clear, simple language and metaphor, so their content knowledge must be deep enough to educate others. Video production is a team effort (director, camera person, editor, etc.) and inherently creates an opportunity for learning in a social context, which has been shown to lead to better learning outcomes in climate change education. Video production also promotes the basic tenets of engagement theory, in which a small group of students is in constant contact with the content and, ideally, creates a product that can be disseminated broadly. Lastly, putting students behind the camera can give them a voice and a sense of empowerment, fostering active participation in the learning process. While video is a medium that is readily disseminated to a broad audience, our focus is on the process (i.e., learning outcomes of students directly involved in media production), not the product. However, we have found that providing students with a means to add their voices to the broader public's discussion of climate change has a positive impact on student engagement with climate change science and on public awareness this problem beyond the classroom. While student-produced media pieces are not intended to provide in

  15. Integrated learning through student goal development.

    Science.gov (United States)

    Price, Deborah; Tschannen, Dana; Caylor, Shandra

    2013-09-01

    New strategies are emerging to promote structure and increase learning in the clinical setting. Nursing faculty designed a mechanism by which integrative learning and situated coaching could occur more readily in the clinical setting. The Clinical Goals Initiative was implemented for sophomore-, junior-, and senior-level students in their clinical practicums. Students developed weekly goals reflecting three domains of professional nursing practice. Goals were shared with faculty and staff nurse mentors at the beginning of the clinical day to help guide students and mentors with planning for learning experiences. After 6 weeks, faculty and students were surveyed to evaluate project effectiveness. Faculty indicated that goal development facilitated clinical learning by providing more student engagement, direction, and focus. Students reported that goal development allowed them to optimize clinical learning opportunities and track their growth and progress. Faculty and students indicated the goals promoted student self-learning, autonomy, and student communication with nurse mentors and faculty. Copyright 2013, SLACK Incorporated.

  16. Developing Students' Energy Literacy in Higher Education

    Science.gov (United States)

    Cotton, Debby R. E.; Miller, Wendy; Winter, Jennie; Bailey, Ian; Sterling, Stephen

    2015-01-01

    Purpose: This paper aims to investigate students' energy literacy at a UK university, and recommends ways in which it can be enhanced using a behaviour change model. Developing students' energy literacy is a key part of the "greening" agenda, yet little is known about how students develop their ideas about energy use and energy saving at…

  17. The Inclusion Potential of Student Production of Digital Learning Objects

    DEFF Research Database (Denmark)

    Levinsen, Karin Tweddell; Sørensen, Birgitte Holm

    2016-01-01

    This account of the inclusion potential of students’ digital production is based on the large-scale research and development project Students’ Digital Production and Students as Learning Designers (2013–2015), funded by the Danish Ministry of Education. The target groups were primary and lower......-designed framework that accommodates and empowers students’ agency. The Danish parliament passed the Law of Inclusion In 2012 with the objective that by 2015, 96% of all students would be included in normal classes. Inclusion was not part of the initial research agenda, but this changed unexpectedly during...... the project. Specifically, students who did not participate or participated only sporadically in everyday school activities at the beginning of the project adopted new positions as participants and agents. We understand these changes as inclusive processes initiated by the combination of teacher...

  18. Students’ scientific production: a proposal to encourage it.

    Science.gov (United States)

    Corrales-Reyes, Ibraín Enrique; Dorta-Contreras, Alberto Juan

    2018-01-31

    The scientific production of medical students in Latin America, is poor and below their potential. The reason for this is the low theoretical and practical knowledge of scientific writing, a low margin for new knowledge generation, a heavy academic and clinical load, and the expected profile of the medical school graduate. In the present short communication, we propose teaching courses in research methodology, scientific writing in English and Spanish, a personalized search for students and mentors with research aptitudes. Also, we propose academic and material stimuli for publishing, rewards for the best papers made by students and the development and support of scientific student journals. Other proposals are the requirement to publish a paper for graduation, and sharing the most outstanding experiences.

  19. Students Union, University Administration and Political Development ...

    African Journals Online (AJOL)

    Students Union, University Administration and Political Development of Nations. ... African Research Review ... resting on the reciprocal determinism of the social learning theory, that students union makes university administration smooth.

  20. Journal of College Student Development

    OpenAIRE

    Janosik, S. M.; Gehring, D. D.

    2003-01-01

    In this national study on the impact of the Clery Campus Crime Disclosure and Reporting Act, 305 college administrators distributed questionnaires to 9,150 undergraduate students. Student knowledge of the Act and changes in student behavior were minimal and varied by gender, victim status, institution type, and institution size.

  1. Dynamics of personal development on healthy students

    Directory of Open Access Journals (Sweden)

    I.E. Kramida

    2013-04-01

    Full Text Available The aim is to study the effectiveness of different physical training for the relatively healthy students. The study involved 1004 students. The directions of development of the students' positive personal qualities. Found that the positive development of personality of students observed mostly on the first and third year than in the second. Could not find significant differences between the growth estimates of development of personality traits of students in classes in the sample program and the program specializations. Found that the rate of development of students' personality traits minor: the average growth estimates for core positive personal qualities for 3 years does not exceed 10% of the maximum possible level. Recommended in the classroom more emphasis on developing positive personality traits. It is shown that special attention should be paid to the development of emotional stability of students and their tolerance towards other people.

  2. Student Leadership Development within Student Government at Snow College

    Science.gov (United States)

    Wilson, Gordon Ned

    2010-01-01

    The purpose of this study was to describe the leadership development process of former student leaders at Snow College. More specifically, the study focused on understanding how, when, and where leadership development took place in their "lived experience" within the student government at Snow College (Van Manen, 1998). Examining the lived…

  3. Innovating the Product Development Organisation

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup; Hein, Lars

    1997-01-01

    The organisational innovation of the product development function is a doubtful affair since we can hardly describe why a specific organisation works. In this article two comprehensive innovation campaigns in Danish industry are described with reference to the nature, content and results...... of innovative processes and as the crux an attempt to explain principal elements in the changes of attitudes and behaviour in companies....

  4. Developing scientist-practitioner students

    OpenAIRE

    Merdian, Hannah Lena; Miller, Kirsty

    2017-01-01

    At the University of Lincoln, we offer three undergraduate degrees in psychology: Psychology; Psychology with Clinical Psychology; and Psychology with Forensic Psychology. All three programmes are very positively perceived, by the students, teaching team, and external examiners. While the ‘with’ students show high satisfaction for the applied elements of their courses, they consistently rate the core psychology modules (common across the three programmes) lower than the Psychology students an...

  5. Developing Critical Thinking through Student Consulting Projects

    Science.gov (United States)

    Canziani, Bonnie; Tullar, William L.

    2017-01-01

    The authors present survey results from faculty at 44 universities on the role of student consulting projects in developing business students' critical thinking. They conclude that students can improve critical thinking by engaging in guided primary and secondary research to inform their business assumptions that underpin business planning and…

  6. Developing Students' Professional Digital Identity

    Science.gov (United States)

    Cochrane, Thomas; Antonczak, Laurent

    2015-01-01

    In contrast to the myth of the "Digital Native" and the ubiquity of Facebook use, we have found that students' digital identities are predominantly social with their online activity beyond Facebook limited to being social media consumers rather than producers. Within a global economy students need to learn new digital literacy skills to…

  7. Developing Entrepreneurial Skills in Pharmacy Students.

    Science.gov (United States)

    Laverty, Garry; Hanna, Lezley-Anne; Haughey, Sharon; Hughes, Carmel

    2015-09-25

    Objective. To create, implement, and evaluate a workshop that teaches undergraduate pharmacy students about entrepreneurship. Design. Workshops with 3 hours of contact time and 2 hours of self-study time were developed for final-year students. Faculty members and students evaluated peer assessment, peer development, communication, critical evaluation, creative thinking, problem solving, and numeracy skills, as well as topic understanding. Student evaluation of the workshops was done primarily via a self-administered, 9-item questionnaire. Assessment. One hundred thirty-four students completed the workshops. The mean score was 50.9 out of 65. Scores ranged from 45.9 to 54.1. The questionnaire had a 100% response rate. Many students agreed that workshops about entrepreneurship were a useful teaching method and that key skills were fostered. Conclusion. Workshops effectively delivered course content about entrepreneurship and helped develop relevant skills. This work suggests students value instruction on entrepreneurship.

  8. Developing the Intercultural Competence of Graduate Students

    Science.gov (United States)

    Dimitrov, Nanda; Dawson, Debra L.; Olsen, Karyn C.; Meadows, Ken N.

    2014-01-01

    This study explores how teaching development programs may facilitate the development of intercultural competence in graduate students and prepare them for communicating effectively in the global workplace after graduation. First, we describe the concept of intercultural teaching competence and examine the skills that graduate students may need to…

  9. Impact of a student leadership development program.

    Science.gov (United States)

    Chesnut, Renae; Tran-Johnson, Jennifer

    2013-12-16

    To assess the effectiveness of the Student Leadership Development Series (SLDS), an academic-year--long, co-curricular approach to developing leadership skills in pharmacy students. Participants met once per month for activities and a college-wide guest speaker session. Students also completed monthly forms regarding what they had learned, participated in poster presentations, and created a personal leadership platform. One hundred twenty-three students participated in the program between 2008 and 2013. On monthly evaluation forms and a summative evaluation, students indicated that the program helped them feel prepared for leadership opportunities and increased their desire to pursue leadership. They valued interacting with pharmacy leaders from the community and learning how they could distinguish themselves as leaders. The SLDS provided pharmacy students with an opportunity to explore personal leadership styles and develop broader understanding of leadership, and increased their desire to pursue leadership positions in the future.

  10. Medical student involvement in website development.

    Science.gov (United States)

    Rosenbaum, Benjamin P; Gorrindo, Tristan L; Patel, Sanjay G; McTigue, Michael P; Rodgers, Scott M; Miller, Bonnie M

    2009-07-01

    The digital management of educational resources and information is becoming an important part of medical education. At Vanderbilt University School of Medicine, two medical students sought to create a website for all medical students to act as each student's individual homepage. Using widely available software and database technology, a highly customized Web portal, known as the VMS Portal, was created for medical students. Access to course material, evaluations, academic information, and community assets were customized for individual users. Modular features were added over the course of a year in response to student requests, monitoring of usage habits, and solicitation of direct student feedback. During the first 742 days of the VMS Portal's release, there were 209,460 student login sessions (282 average daily). Of 348 medical students surveyed (71% response rate), 84% agreed or strongly agreed that 'consolidated student resources made their lives easier' and 82% agreed or strongly agreed that their needs were represented by having medical students design and create the VMS Portal. In the VMS Portal project, medical students were uniquely positioned to help consolidate, integrate, and develop Web resources for peers. As other medical schools create and expand digital resources, the valuable input and perspective of medical students should be solicited.

  11. Engaging in Productive Sector Development

    DEFF Research Database (Denmark)

    Whitfield, Lindsay; Buur, Lars

    Through a comparison of sector cases in Mozambique and Ghana, the paper analyzes why and how African states engage in developing productive sectors and with what success. It argues that successful state interventions depend on four factors: (1) sustained political support by the government...... in the four factors and thus different economic outcomes. Specifically, cocoa, export is a case of sustained political support, palm oil is a case of poorly implemented industrial policy, and horticulture export is a case of political neglect of an industry. In concluding, the paper emphasizes the political...

  12. Engaging in productive sector development

    DEFF Research Database (Denmark)

    Buur, Lars; Whitfield, Lindsay

    Through a comparison of sector cases in Mozambique and Ghana, the paper analyzes why and how African states engage in developing productive sectors and with what success. It argues that successful state interventions depend on four factors: (1) sustained political support by the government...... in the four factors and thus different economic outcomes. Specifically, cocoa, export is a case of sustained political support, palm oil is a case of poorly implemented industrial policy, and horticulture export is a case of political neglect of an industry. In concluding, the paper emphasizes the political...

  13. Volcanic Eruption: Students Develop a Contingency Plan

    Science.gov (United States)

    Meisinger, Philipp; Wittlich, Christian

    2013-04-01

    able to develop a (basic) plan to evacuate people from the affected regions. Based on the abilities of your group you can vary the task in many different ways, such as adding information on traffic and public or private transportation to the scenario. Didactic Aspects: Nevertheless it cannot be aim of such a project to develop of a real-life evacuation plan, as this would exceed your student's abilities by far. The focus should rather be on the process of dealing with the problem and developing solutions to it, than on the mere product e.g. a complete plan. This approach corresponds with recent tendencies in German didactics of teaching geography at school favoring the so-called "prozessorientiertes Experimentieren"(see: Lethmate, Otto and Wilhelmi for further reference) as part of training your students (geographic) skills. Applied to the presented task of developing an evacuation plan, you should encourage your students to give argumentative proof for the decisions they make in order to compare their results from a problem solving perspective. Overview: What: process- driven role-play "planning evacuation in case of an eruption of a potentially active volcano (Laacher See)" For whom: adjustable from German form 8-11 (age: 14- 17 years) Time: depending on the prior knowledge of volcanoes a min. of 45-90 minutes. Sources: Lethmate, J.: Sind geographische Experimente Experimente? Praxis Geographie 33, Heft 3, S. 42-43 Otto, K.-W. u.a.: Das geographische Experiment im Kontext empirischer Lehr-Lernforschung, Geographie und ihre Didaktik 38 (2010) H.3, S. 133-145 Wilhelmi, V.: Die experimentelle Lernform. Herausforderung des kompetenzorientierten Geographieunterrichts, Praxis Geographie 42, Heft 7-8, 2012, S. 4-8

  14. Creativity Development for Engineering Students

    DEFF Research Database (Denmark)

    Zhou, Chunfang; Holgaard, Jette Egelund; Kolmos, Anette

    2010-01-01

    In this paper we outline two approaches to enhance creative skills in a PBL environment at Aalborg University, Denmark. The two strategies are respectively characterized by 1) integrating creativity training into curriculum and 2) introducing real life engineering projects for students. Two cases...

  15. Next Generation Biopharmaceuticals: Product Development.

    Science.gov (United States)

    Mathaes, Roman; Mahler, Hanns-Christian

    2018-04-11

    Therapeutic proteins show a rapid market growth. The relatively young biotech industry already represents 20 % of the total global pharma market. The biotech industry environment has traditionally been fast-pasted and intellectually stimulated. Nowadays the top ten best selling drugs are dominated by monoclonal antibodies (mABs).Despite mABs being the biggest medical breakthrough in the last 25 years, technical innovation does not stand still.The goal remains to preserve the benefits of a conventional mAB (serum half-life and specificity) whilst further improving efficacy and safety and to open new and better avenues for treating patients, e.g., improving the potency of molecules, target binding, tissue penetration, tailored pharmacokinetics, and reduced adverse effects or immunogenicity.The next generation of biopharmaceuticals can pose specific chemistry, manufacturing, and control (CMC) challenges. In contrast to conventional proteins, next-generation biopharmaceuticals often require lyophilization of the final drug product to ensure storage stability over shelf-life time. In addition, next-generation biopharmaceuticals require analytical methods that cover different ways of possible degradation patterns and pathways, and product development is a long way from being straight forward. The element of "prior knowledge" does not exist equally for most novel formats compared to antibodies, and thus the assessment of critical quality attributes (CQAs) and the definition of CQA assessment criteria and specifications is difficult, especially in early-stage development.

  16. [The evaluation of physical development of students].

    Science.gov (United States)

    2012-01-01

    The article demonstrates that physical health of university students is conditioned by the aggregate of morpho-functional indices and depends on the development of physical qualities of students. The evaluation of mass/height indicators of female students demonstrates the increase of total body size and weakness of body build. The testing of physical readiness testified the ambiguity of high-speed and high-speed/power qualities and results of stamina evaluation.

  17. New Product Development and Business Strategy of Research and Development

    International Nuclear Information System (INIS)

    Lee, Sun Cheol

    1998-05-01

    The contents of this book are new product development strategy of the top business, commercialization and new product development, development case analysis and framework of new product development, investigation strategy for idea of new product development, case analysis of research as development and goal of new product development, case analysis and planning and management for new product development, innovative item development and technical management against confusion, the map for determination procedure of development, strategy of market and goods and development strategy cases in leading company.

  18. Ethical Development through Student Activities Programming.

    Science.gov (United States)

    Brock, Carol S.

    1991-01-01

    Student activities programing, viewed as essential to the college experience, is defended by outlining some of the values and growth opportunities it provides for students. Several specific programing strategies useful as catalysts in values development are described, including values clarification exercises, multicultural programing, and…

  19. Developing Middle Grades Students' MP3

    Science.gov (United States)

    Tassell, Janet; Stobaugh, Rebecca; Sheffield, Linda

    2011-01-01

    Middle grades are a critical time for capturing the interest and imagination and developing the potential of mathematically promising students. This is a time for students to make sense of mathematics, build a solid foundation and enthusiasm, and set the course for the highest levels of mathematics in the future. This is a time to explore their…

  20. Research Skills Development in Higher Education Students

    Science.gov (United States)

    Bergamini, Tiziana Priede; Navarro, Cristina Lopez-Cozar

    2014-01-01

    This case study presents the development of a research project in a third-year undergraduate course, Family Business Administration. The research project aimed at promoting research skills in students. The authors formed working groups of no more than six students, and each group had to select an original research topic after conducting a…

  1. Engaging Business Students in Quantitative Skills Development

    Science.gov (United States)

    Cronin, Anthony; Carroll, Paula

    2015-01-01

    In this paper the complex problems of developing quantitative and analytical skills in undergraduate first year, first semester business students are addressed. An action research project, detailing how first year business students perceive the relevance of data analysis and inferential statistics in light of the economic downturn and the…

  2. The Challenges of New Product Development in a Developing Economy

    OpenAIRE

    M. O. Oduola; A. M. Yakubu

    2017-01-01

    New Product Development (NPD) involves creating a new product from concept to the market. The product could be entirely new or rebranding. It is a critical focus of any production firm. The increase in volume of new competitive products is an indicator of any fast growing production concern. However the challenges that could affect development of a new product in a developing economy include, but not limited to the following: Inadequate infrastructural facilities, lack of funding, low technol...

  3. Managing a Product Development Team

    Science.gov (United States)

    Lehtonen, Kenneth E.; Barrett, Larry

    2003-01-01

    Orbiting 380 miles above the earth, NASA s Hubble Space Telescope (HST) has returned a wealth of scientific data about our universe and galaxies beyond highlighted by spectacular images of the birth and death of stars, colliding galaxies, and other extra-worldly events. Despite its tremendous success for almost two decades, the HST ground support system experienced down-to-earth problems prior to the turn of the century, namely budgetary ones. To keep HST operating efficiently to 201 2 and beyond, the Vision 2000 project was conceived with the primary goal of substantially reducing the costs of operating and maintaining the spacecraft ground systems. Taking advantage of this atypical management opportunity, a set of Product Development Teams (PDTs) were established, whose charter was to re-engineer the ground system, and in doing so, reduce the remaining life-of-mission operating and maintenance costs, while providing improved reliability and increased capabilities.

  4. Methods and Techniques. Student Involvement in the Production of Teaching Aids.

    Science.gov (United States)

    Fernau, C.

    1984-01-01

    Indicates that teaching materials used in industrialized countries are not appropriate and often cannot be adapted for the use in developing countries. Having students help with production of teaching aids increases their motivation for using them. (JOW)

  5. Development of student self-study activities

    DEFF Research Database (Denmark)

    Kvols, Anja Madsen; Kim, Won-Chung; Christensen, Dorthe Ansine

    2015-01-01

    of the teacher education and will aim at strengthening students' motivation for choosing self-initiated activities. The motivation should for example be based on students´ perception of relevance and quality of their own initiatives and the possibility of guidance in self-selected activities. This paper...... the possibility of developing educational theories for the teachers’ education in an effort to develop independence as a study skill. Keywords: studieaktivitetsmodellen, selvstændige studieaktiviteter, kortlægning af studieaktiviteter...

  6. Green product development : What does the country product space imply?

    NARCIS (Netherlands)

    Fraccascia, Luca; Giannoccaro, Ilaria; Albino, Vito

    This paper contributes to green product development by identifying the green products with the highest potential for growth in a country. To address our aim, we use the concept of product proximity and product space and, borrowing from the results of recent studies on complexity economics, we

  7. Leadership development for dental students: what do students think?

    Science.gov (United States)

    Victoroff, Kristin Z; Schneider, Keith; Perry, Crystal

    2008-09-01

    Effective leaders are needed to move the dental profession forward, building on past accomplishments, meeting new challenges, and leading innovation and change. There is a lack of research findings regarding students' perceptions of the importance of leadership abilities and/or their interest in developing leadership skills during their dental school experience. The purpose of this study was to explore dental students' perceptions related to leadership development. A forty-seven-question, self-administered, paper and pencil survey was administered to all students enrolled in the D.M.D. program at one Midwestern dental school. The response rate was 83 percent (225/272). The majority of students agreed that it is important for dentists to have leadership skills and that leadership skills can be learned. Most reported that they expect to assume a leadership role in their dental practices (97 percent), to participate in volunteerism in dentistry (85 percent), and to participate in non-dentistry-related leadership roles in the community (72 percent). Over one-third (37 percent) anticipate participating in leadership roles in dental associations, 28 percent in academic dentistry, and 14 percent in military dentistry. Approximately two-thirds of respondents agreed (42 percent) or strongly agreed (24 percent) that they would be interested in participating in a leadership development program if one were offered at their school. Students reported interest in improving their confidence, assertiveness, ability to communicate effectively (including public speaking), ability to listen to others, organizational skills, and ability to influence others. The results of this study suggest that many dental students are interested in developing leadership skills. Insights from this study can inform the design of leadership development programs.

  8. Product design and development engineering

    International Nuclear Information System (INIS)

    Lee, Kookhwan

    2008-01-01

    This book gives design of molded plastics, design of press product, design of die casting products, the application of communication terminal design, application and design of machine elements(screw, spring, bearing, gear, retaining ridge, drawing standards, KS and JIS material marks list), 3D CAD, concurrent engineering of product design, creative concept design.

  9. Development of european consciousness in Erasmus students

    Directory of Open Access Journals (Sweden)

    Sevda Mutlu

    2011-12-01

    Full Text Available This research is the content analysis of 502 Erasmus students’ experiences published in the website www.20erasmus.eu. One of the main purposes of the Erasmus Student Exchange Program is to maintain a cross-cultural dialogue through student activity, to remove prejudices and thus to strengthen interaction and join EU citizens under such concepts as “European Consciousness” and “Being European”. The purpose of this study is to determine how successful the Erasmus Student Exchange Program is through the shared Erasmus experiences of the participating students. In conclusion, in this research, it is observed that the students talked highly positively about the Erasmus experience. The students described this process as enjoyable and productive. It could be argued that the Erasmus experience contributed to students’ “individual development” rather than “academic development”. It could also be maintained that one of the key purposes of the Erasmus exchange program is to remove prejudices by maintaining student mobility and cross-cultural dialogue and to unite societies under the European Consciousness and European People understanding via strengthening interactions between EU member citizens. Data collected in this research present evidence that the Erasmus programme has reached this aim

  10. Developing Automatic Student Motivation Modeling System

    Science.gov (United States)

    Destarianto, P.; Etikasari, B.; Agustianto, K.

    2018-01-01

    Achievement motivation is one of the internal factors in encouraging a person to perform the best activity in achieving its goals. The importance of achievement motivation must be possessed as an incentive to compete so that the person will always strive to achieve success and avoid failure. Based on this, the system is developed to determine the achievement motivation of students, so that students can do self-reflection in improving achievement motivation. The test results of the system using Naïve Bayes Classifier showed an average rate of accuracy of 91,667% in assessing student achievement motivation. By modeling the students ‘motivation generated by the system, students’ achievement motivation level can be known. This class of motivation will be used to determine appropriate counseling decisions, and ultimately is expected to improve student achievement motivation.

  11. Decision making in global product development

    DEFF Research Database (Denmark)

    Søndergaard, Erik Stefan; Ahmed-Kristensen, Saeema

    2014-01-01

    Many engineering companies experience new challenges when globalising product development. Global product development (GPD) is a relatively nascent research area, and previous research reveals the need for decision support frameworks. This research investigates how decisions are made when compani...

  12. Product/Service-System Development

    DEFF Research Database (Denmark)

    Tan, Adrian; McAloone, Timothy Charles; Gall, Catherine

    2007-01-01

    Product/service-systems’ (PSS) are innovation strategies where instead of focusing on the value of selling physical products, one focuses on the value of the utility of products and services throughout the product’s life period. This approach enables companies to provide customers with offerings...... that continuously deliver value and create a strong competitive advantage. PSS attempts to transcend the old industrial credo that value is embedded in products and the consideration of ‘cost-quality-time’ relates to the physical artefact. While there is increasing interest in PSS, limited research has been done...

  13. Meteorological Development Laboratory Student Career Experience Program

    Science.gov (United States)

    McCalla, C., Sr.

    2007-12-01

    The National Oceanic and Atmospheric Administration's (NOAA) National Weather Service (NWS) provides weather, hydrologic, and climate forecasts and warnings for the protection of life and property and the enhancement of the national economy. The NWS's Meteorological Development Laboratory (MDL) supports this mission by developing meteorological prediction methods. Given this mission, NOAA, NWS, and MDL all have a need to continually recruit talented scientists. One avenue for recruiting such talented scientist is the Student Career Experience Program (SCEP). Through SCEP, MDL offers undergraduate and graduate students majoring in meteorology, computer science, mathematics, oceanography, physics, and statistics the opportunity to alternate full-time paid employment with periods of full-time study. Using SCEP as a recruiting vehicle, MDL has employed students who possess some of the very latest technical skills and knowledge needed to make meaningful contributions to projects within the lab. MDL has recently expanded its use of SCEP and has increased the number of students (sometimes called co- ops) in its program. As a co-op, a student can expect to develop and implement computer based scientific techniques, participate in the development of statistical algorithms, assist in the analysis of meteorological data, and verify forecasts. This presentation will focus on describing recruitment, projects, and the application process related to MDL's SCEP. In addition, this presentation will also briefly explore the career paths of students who successfully completed the program.

  14. Evolving Product Information in Aligning Product Development Decisions across Disciplines

    NARCIS (Netherlands)

    Oude Luttikhuis, Ellen; de Lange, Jos; Lutters, Diederick; ten Klooster, Roland

    2015-01-01

    Today's product development is fragmented across various disciplines all with their own fields of expertise. Maintaining overview in consequences and implications of decisions is difficult, since many stakeholders are involved. To optimise the product development, many methods are developed based on

  15. Monitoring Student Activity in Collaborative Software Development

    DEFF Research Database (Denmark)

    Dietsch, Daniel; Podelski, Andreas; Nam, Jaechang

    2013-01-01

    year of studies formed 20 groups and worked collaboratively to develop video games. Throughout the lab, students have to use a variety of tools for managing and developing their projects, such as software version control, static analysis tools, wikis, mailing lists, etc. The students are also supported......This paper presents data analysis from a course on Software Engineering in an effort to identify metrics and techniques that would allow instructor to act proactively and identify patterns of low engagement and inefficient peer collaboration. Over the last two terms, 106 students in their second...... by weekly meetings with teaching assistants and instructors regarding group progress, code quality, and management issues. Through these meetings and their interactions with the software tools, students leave a detailed trace of data related to their individual engagement and their collaboration behavior...

  16. Developing Cloud Chambers with High School Students

    Science.gov (United States)

    Ishizuka, Ryo; Tan, Nobuaki; Sato, Shoma; Zeze, Syoji

    The result and outcome of the cloud chamber project, which aims to develop a cloud chamber useful for science education is reported in detail. A project includes both three high school students and a teacher as a part of Super Science High School (SSH) program in our school. We develop a dry-ice-free cloud chamber using salt and ice (or snow). Technical details of the chamber are described. We also argue how the project have affected student's cognition, motivation, academic skills and behavior. The research project has taken steps of professional researchers, i.e., in planning research, applying fund, writing a paper and giving a talk in conferences. From interviews with students, we have learnt that such style of scientific activity is very effective in promoting student's motivation for learning science.

  17. The development of environmental productivity

    DEFF Research Database (Denmark)

    Henningsen, Geraldine; Henningsen, Arne; Schröder, Sascha T.

    the environmental productivity of individual generator units based on a panel data set for the period 1998 to 2011 that includes virtually all fuel-fired generator units in Denmark. We further decompose total productivity into technical efficiency, best practice ratio, and scale efficiency and use a global...... Malmquist index to calculate the yearly changes. By applying time series clustering, we can identify high, middle, and low performance groups of generator units in a dynamic setting. Our results indicate that the sectoral productivity only slightly increased over the fourteen years. Furthermore, we find...... that there is no overall high achiever group, but that the ranking, although time consistent, varies between the different productivity measures. However, we identify steam turbines and combustion engines for combined heat and power production as potential high performers, while combustion engines that only produce...

  18. Product development of pumpkin tablet

    Directory of Open Access Journals (Sweden)

    Kamgoed, T.

    2007-05-01

    Full Text Available The development of pumpkin tablet was studied and the drying conditions of pumpkin using a double drum dryer were optimized. The study factors were drying agents (maltodextrin D.E.13-16 andtapioca flour at different levels (3 and 5%, drying temperatures (130 and 140oC and drum dryer speeds (4 and 5 rpm. The results showed that the optimal conditions were using 3% maltodextrin D.E.13-16, dryingtemperature of 130oC and drum dryer speed of 4 rpm. The moisture, fat, bulk density, reducing sugars and granulometric retention of the obtained pumpkin powder were 3.39%, 1.42%, 1.004 g/ml, 12.63% and 0.67%, respectively and L*, a* and b* values were 73.85, -0.60 and 35.23, respectively. A study of suitable amount of icing sugar using different contents for tablet production (0, 10, 20, 30 and 40% was performedand showed that using 20% icing sugar was the most acceptable. The obtained pumpkin tablet was subjected to chemical, physical and microbiological analysis. The ash, moisture, protein, fat, fiber and carbohydratecontents were 1.87, 3.60, 3.34, 1.00, 2.26 and 87.99%, respectively. The reducing sugars and β-carotene contents were 5.44±0.61% and 3.79±0.57 mg/100g, respectively. The Aw, hardness and solubility were 0.56,3.25 kgf and 25.00 %, respectively. The L*, a* and b* values were 79.85, 0.28 and 23.64, respectively. The total microbial count and the yeast and mould count were <10 CFU/g. The shelf life of the pumpkin tabletwas at least 4 months at room temperature (35±2oC.

  19. Virtual Product Development on Venturi Pump

    Directory of Open Access Journals (Sweden)

    Sava Ianici

    2011-10-01

    Full Text Available Market globalization and increased customer demands are leading providers of low product series to the high cost of development and construction. To overcome noted challenges it is necessary to use process of virtual product development. In that way it is possible, even in early phases of product development, to assess the operational product behaviour. Even the specific customer demands are determined before the actual product design phase. The paper presents an up to date concept of virtual product development with application on assessment of operational behaviour of Venturi pumps.

  20. MEASURING PRODUCTIVITY OF SOFTWARE DEVELOPMENT TEAMS

    Directory of Open Access Journals (Sweden)

    Goparaju Purna Sudhakar

    2012-02-01

    Full Text Available This paper gives an exhaustive literature review of the techniques and models available tomeasure the productivity of software development teams. Definition of productivity, measuringindividual programmer’s productivity, and measuring software development team productivity arediscussed. Based on the literature review it was found that software productivity measurement canbe done using SLOC (Source Lines of Code, function points, use case points, object points, andfeature points. Secondary research findings indicate that the team size, response time, taskcomplexity, team climate and team cohesion have an impact on software development teamproductivity. List of factors affecting the software development team productivity are studied andreviewed.

  1. Developing clinical teaching capacities of midwifery students.

    Science.gov (United States)

    Rance, Sharon; Sweet, Linda

    2016-06-01

    Competency Standards in Australia articulate that the midwife must be able to contribute to the professional development of themselves and others. Few undergraduate health professional curricula currently incorporate content for the development of specific knowledge and skills required for clinical teaching. This project aimed to understand and enhance midwifery students' preparedness to assume their future clinical teaching responsibilities. Design-based research was used to implement an educational intervention aimed at developing clinical teaching skills through a peer education session between 1st and 3rd year students. The perspectives of 30 undergraduate midwifery students about their preparedness for their teaching role and the intervention were obtained through 3 focus groups. A thematic analysis of the data was undertaken. Three themes were identified encompassing the research aims and objectives; 'Co-creating a culture for learning', 'reciprocal teaching and learning' and 'developing clinical teaching capacities'. The findings indicate that the midwifery students had a holistic understanding of their responsibilities in clinical teaching in the workplace. They were able to identify ways in which their teaching capacities were being developed through their clinical experiences and the curriculum, both intended and hidden. Despite limited educational activities for clinical teaching, the midwifery students made explicit connections of the relational interdependence of workplace-based experiences and their learning. Students were clearly able to identify ways in which their own learning experiences and the culture in which this learning is embedded, assists them to develop clinical teaching skills, ready to support the next generation of midwifery students. Copyright © 2015 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

  2. Toward Understanding Business Student Professional Development Engagement

    Science.gov (United States)

    Blau, Gary; Blessley, Misty; Kunkle, Matthew; Schirmer, Michael; Regan, Laureen

    2017-01-01

    Professional development engagement (PDE) is defined as the level of perceived undergraduate engagement in professional development activities. An 11-item measure of PDE exhibited a good reliability. Using a complete data sample of 467 graduating business undergraduates, four variable sets (student background or precollege variables,…

  3. CIRP Design 2012 Sustainable Product Development

    CERN Document Server

    2013-01-01

    During its life cycle, a product produces waste that is over 20 times its weight. As such it is critical to develop products that are sustainable. Currently product development processes lack high quality methods and tools that are empirically validated to support development of sustainable products. This book is a compilation of over forty cutting edge international research papers from the 22nd CIRP International Design Conference, written by eminent researchers from 15 countries, on engineering design process, methods and tools, broadly for supporting sustainable product development.   A variety of new insights into the product development process, as well as a host of methods and tools that are at the cutting edge of design research are discussed and explained covering a range of diverse topics. The areas covered include: ·Sustainable design and manufacturing, ·Design synthesis and creativity, ·Global product development and product life cycle management, ·Design for X (safety, reliability, manufactu...

  4. Developing engineering design core competences through analysis of industrial products

    DEFF Research Database (Denmark)

    Hansen, Claus Thorp; Lenau, Torben Anker

    2011-01-01

    Most product development work carried out in industrial practice is characterised by being incremental, i.e. the industrial company has had a product in production and on the market for some time, and now time has come to design a new and upgraded variant. This type of redesign project requires...... that the engineering designers have core design competences to carry through an analysis of the existing product encompassing both a user-oriented side and a technical side, as well as to synthesise solution proposals for the new and upgraded product. The authors of this paper see an educational challenge in staging...... a course module, in which students develop knowledge, understanding and skills, which will prepare them for being able to participate in and contribute to redesign projects in industrial practice. In the course module Product Analysis and Redesign that has run for 8 years we have developed and refined...

  5. Integration of the Scrum methodology in mechatronic product development

    OpenAIRE

    Mauri Also, Joan Josep

    2015-01-01

    The purpose of this study was to demonstrate if it would be possible for a mechatronic product development team to use Scrum, an Agile Development framework with both, the students of UVIC-UCC and the company ITQ GmbH, behind the student project called Mi5. The Agile philosophy and methods have revolutionized the software development industry in the last decade, and therefore it was of interest to see if this new way of working would be applicable in other disciplines. Thus, the study focu...

  6. On the teaching of product development and innovation

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup; McAloone, Timothy Charles; Hansen, Claus Thorp

    2000-01-01

    Danish industrialists point out, that the importance of product development and innovation in industry is strongly growing, but the focus upon the way we are working is weakening. Therefore there is concern about the necessary number of students and their abilities in the design area. Current eff...... efforts related to the teaching of design will be reported in the following....

  7. Product Configuration Systems - Implications for Product Innovation and Development

    DEFF Research Database (Denmark)

    Edwards, Kasper; Pedersen, Jørgen Lindgaard

    2004-01-01

    configurations. However, costs are but one parameter on which firms compete and firms must continually innovate new and develop existing products. This paper presents original empirical insights on implementation and use of product configuration systems in a number of Danish industrial firms. The paper discusses...... the organisational changes associated with PCS and how this affects product innovation and development. The paper begins by introducing product configuration systems, which are then placed in context to the firm as a process technology which coordinate different processes: product development, order acquisition......Product Configuration Systems (PCS) is a step in the direction of mass customization in the sense that PCS allows a firm to significantly lower the unit cost of configuration. Thus PCS is a valuable technology for lowering operating costs while retaining a high number of possible product...

  8. Structuring user-centred product development processes

    NARCIS (Netherlands)

    Hoolhorst, F.W.B.

    2012-01-01

    Within the last decades, product development industry has found itself facing a general increase in product use problems. These problems originate from a mismatch between the actual functionality that the product provides and the afforded product-user interaction versus the user’s expectations

  9. Linking quality goals and product development competences

    DEFF Research Database (Denmark)

    Olsen, Johanne Rønnow; Harmsen, Hanne; Friis, Alan

    2008-01-01

    Quality is a main determinant of consumer food choice. Product development is accordingly a key activity for companies, because it generates the products on the quality of which consumer choices are based. In this respect, product development managers have a focal role, as their personal quality......, including reversed laddering sessions with 18 product development managers. Discrepancies between managerial and consumer quality goals are uncovered. Furthermore, the results point to two general dilemmas faced by product development managers in relation to quality; an external stakeholder dilemma...... orientation influence the way product development is performed. The aim of this paper is to investigate managerial quality goals and how these may be linked to product development competences, which has not previously been studied. The study draws on an empirical, qualitative study in the Danish food industry...

  10. Students' Demand for Smartphones: Structural Relationships of Product Features, Brand Name, Product Price and Social Infuence

    Science.gov (United States)

    Suki, Norazah Mohd

    2013-01-01

    Purpose: The study aims to examine structural relationships of product features, brand name, product price and social influence with demand for Smartphones among Malaysian students'. Design/methodology/approach: Data collected from 320 valid pre-screened university students studying at the pubic higher learning institution in Federal Territory of…

  11. Impact of mentoring medical students on scholarly productivity.

    Science.gov (United States)

    Svider, Peter F; Husain, Qasim; Mauro, Kevin M; Folbe, Adam J; Baredes, Soly; Eloy, Jean Anderson

    2014-02-01

    Our objectives were to evaluate collaboration with medical students and other nondoctoral authors, and assess whether mentoring such students influences the academic productivity of senior authors. Six issues of the Laryngoscope and International Forum of Allergy & Rhinology (IFAR) were examined for the corresponding author of each manuscript, and whether any students were involved in authorship. The h-index of all corresponding authors was calculated using the Scopus database to compare the scholarly impact of authors collaborating with students and those collaborating exclusively with other physicians or doctoral-level researchers. Of 261 Laryngoscope manuscripts, 71.6% had exclusively physician or doctoral-level authors, 9.2% had "students" (nondoctoral-level authors) as first authors, and another 19.2% involved "student" authors. Corresponding values for IFAR manuscripts were 57.1%, 6.3%, and 36.5%. Corresponding authors who collaborated with students had higher scholarly impact, as measured by the h-index, than those collaborating exclusively with physicians and doctoral-level scientists in both journals. Collaboration with individuals who do not have doctoral-level degrees, presumably medical students, has a strong association with scholarly impact among researchers publishing in the Laryngoscope and IFAR. Research mentorship of medical students interested in otolaryngology may allow a physician-scientist to evaluate the students' effectiveness and functioning in a team setting, a critical component of success in residency training, and may have beneficial effects on research productivity for the senior author. © 2013 ARS-AAOA, LLC.

  12. Intelligences Developed by the Student Chess Player

    Directory of Open Access Journals (Sweden)

    Yuraima Margelis Matos De Rojas

    2018-05-01

    Full Text Available To strengthen cognitive development in students requires the use of innovative, creative and formative strategies that allow it to achieve, being one of the didactic strategies chess. For what was proposed as research purpose: Identify the intelligences developed by the student athlete of the Sports Talent Education Unit that play chess, to suggest some recommendations that can be put into practice in educational institutions. Methodologically it was approached from the qualitative paradigm through a phenomenological method that reveals the reality from the experiences and experiences of the social actors. Six key students of the institution were chess players, to whom an open interview was applied to obtain the necessary information, which was systematized to extract the categories, codifications and triangulate the information. As results, it was obtained that the students develop the intelligences: logical-mathematical, linguistic, spatial and visual, as the intrapersonal during the game of chess and in the learning processes. Configured in categories, analyzed and interpreted from the voices of social actors, theorists and researchers. Suggesting some recommendations that can be put into practice to strengthen the intelligences in the student.

  13. Extending product modeling methods for integrated product development

    DEFF Research Database (Denmark)

    Bonev, Martin; Wörösch, Michael; Hauksdóttir, Dagný

    2013-01-01

    Despite great efforts within the modeling domain, the majority of methods often address the uncommon design situation of an original product development. However, studies illustrate that development tasks are predominantly related to redesigning, improving, and extending already existing products...... and PVM methods, in a presented Product Requirement Development model some of the individual drawbacks of each method could be overcome. Based on the UML standard, the model enables the representation of complex hierarchical relationships in a generic product model. At the same time it uses matrix....... Updated design requirements have then to be made explicit and mapped against the existing product architecture. In this paper, existing methods are adapted and extended through linking updated requirements to suitable product models. By combining several established modeling techniques, such as the DSM...

  14. The Relationship Between Library Development and Students ...

    African Journals Online (AJOL)

    The study examined the level of development of school libraries in privately owned secondary schools in five local government areas of Edo State and the influence of the school libraries on students' academic performances. Random sampling was used to select 48 out of a total of the 83 private schools in the study area.

  15. Developing Cultural Competence: Student and Alumni Perspectives

    Science.gov (United States)

    Petrovich, Anne; Lowe, Mitzi

    2005-01-01

    One of the areas of increased importance to social work pedagogy is the development of culturally competent practice skills. In focus groups, first and second year students, and recent alumni reflected on their growing awareness and competence concerning cultural diversity. Meaningful patterns emerged emphasizing the importance of psychologically…

  16. Developing and Assessing College Student Teamwork Skills

    Science.gov (United States)

    Hughes, Richard L.; Jones, Steven K.

    2011-01-01

    Some form of team-oriented work is employed in most, if not all, organizations today. It would seem, then, that an important role for higher education should involve developing critical teamwork skills among students so as to prepare them for success in life. This very point was highlighted in a 2009 poll conducted on behalf of the Association of…

  17. Instructor's Guide for Human Development Student Modules.

    Science.gov (United States)

    South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

    This instructor's guide is designed for use with an accompanying set of 61 student learning modules on human development. Included among the topics covered in the individual modules are the following: consumer and homemaking education (health and nutrition, personal appearance and grooming, puberty, menstruation, the human reproductive system,…

  18. A short course in sustainable product development

    DEFF Research Database (Denmark)

    McAloone, Tim C.

    2005-01-01

    This short course in sustainable product development models, methods and mindsets is designed to fit into the Unical course on Engineering Design Methods. Three modules (called “seminars”) will guide you through . The demands for sustainable development . Professional methods for analysing and ch...... and changing products’ environmental profiles . A new approach to product service system development, where the physical product becomes an incidental aspect in the final offering to the customer...

  19. Student production: making a realistic stereo CG short film in six months

    Science.gov (United States)

    Ramasamy, Celambarasan

    2010-02-01

    This paper breaks down the R&D and production challenges faced on a stereoscopic CG short film that was developed on a six month time budget. Using this film as an example, the manner in which technical innovation and story telling techniques can be used to emphasize the strengths and hide the weaknesses of a limited timeframe student production is discussed.

  20. Students' Perception of West African Agricultural Productivity ...

    African Journals Online (AJOL)

    E M IGBOKWE

    recommended that West African Agricultural Productivity Programme officials ... The agricultural sector in the 1960s provided the main source of employment, .... their fathers and mothers' occupation were majorly trading (43.3%) and trading.

  1. Business Cooperation and Regional Productive Development in ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Business Cooperation and Regional Productive Development in Chile, El ... program dedicated to strengthening independent policy research institutions, ... Call for proposals: Innovations for the economic inclusion of marginalized youth.

  2. Relating French Immersion Teacher Practices to Better Student Oral Production

    Science.gov (United States)

    Haj-Broussard, Michelle; Olson Beal, Heather K.; Boudreaux, Nicole

    2017-01-01

    This study examined seven Louisiana kindergarten immersion teachers' practices to evaluate students' oral target language production and compare the oral production elicited when different instructional practices were used over a single semester. Three rounds of three 20-minute observations in three different contexts--circle time, direct…

  3. Effect of Physical Therapy Students' Clinical Experiences on Clinician Productivity.

    Science.gov (United States)

    Pivko, Susan E; Abbruzzese, Laurel D; Duttaroy, Pragati; Hansen, Ruth L; Ryans, Kathryn

    2016-01-01

    Physical therapy clinical education experiences (CEEs) are difficult to secure, particularly first-level CEEs. Our purpose was to determine 1) what impact student full-time CEEs have on PT clinician productivity and 2) whether there is a productivity difference between first vs final CEEs. Productivity logs, including possible factors impacting productivity, were distributed to clinician-student pairings on first and final CEEs. Two-week baseline data (without a student) were compared to weeks 1 and 6 (with a student) for 31 logs using a 2x4 repeated-measures ANOVA. In a subset of 17 logs for CEEs 8 weeks or longer, a 2x5 repeated-measures ANOVA was performed. There was a significant increase in the number of patients seen and CPT units billed by both levels of CEEs comparing weeks 1 and 6. In the subset of CEEs, 8 weeks or longer, there was a significant increase in the number of patients treated per hour at week 6 and a trend toward a change at week 8 when compared to baseline week A. The factors selected as impacting productivity were census (59%) and staffing (32%). Physical therapy clinician-student pairings showed an overall increase in productivity during both full-time first and final level CEEs.

  4. Understanding users in product development

    DEFF Research Database (Denmark)

    Geert Jensen, Birgitte

    2012-01-01

    , the guideline contain a step by step process to develop easy‐to‐open packaging. The guideline is constructed in a way that allows the enterprise to pick and choose in respect to the enterprise´s needs and competences. The main focus in the development of the guidelines has been to produce a tool that function...... observations is a tool for user understanding and that the first step towards better packaging, goes through consensus in the organization regarding the need for more easy‐opening packaging....

  5. Concurrent Engineering in seafood product development

    DEFF Research Database (Denmark)

    Jonsdottir, Stella; Vesterager, Johan; Børresen, Torger

    1998-01-01

    benefit from the CE approach which can support product developers to provide concurrent specifications for raw materials, ingredients, packaging, and production methods. The approach involves the use of product models from which line extensions are more easily generated than by use of customary stepwise...... techniques. it is anticipated that other food industries also can benefit from the more simultaneous approach...

  6. Development of Production Control in Small Batch Production

    Directory of Open Access Journals (Sweden)

    Németh Péter

    2016-01-01

    Full Text Available Our aim with this paper is to develop a new performance measurement and control system for small batch production in the automotive industry. For this reason, we present our previous research results for warehouse performance measurement and adopt its methodology to production control. The proposed method is based on artificial intelligence (neural networks.

  7. Environmental improvement through product development

    DEFF Research Database (Denmark)

    McAloone, Tim C.; Bey, Niki

    Companies in Denmark and abroad are working increasingly to reduce human impacts on the environment and nature. At the same time there must still be a large focus on the creation of value for customers and consumers. This development gives rise to a huge potential for Danish companies, to create ...... Environmental Protection Agency’s company funding scheme. We hope you will be inspired!...

  8. Product Platform Development in Industrial Networks

    DEFF Research Database (Denmark)

    Karlsson, Christer; Skold, Martin

    2011-01-01

    The article examines the strategic issues involved in the deployment of product platform development in an industrial network. The move entails identifying the types and characteristics of generically different product platform strategies and clarifying strategic motives and differences. Number o...... of platforms and product brands serve as the key dimensions when distinguishing the different strategies. Each strategy has its own challenges and raises various issues to deal with.......The article examines the strategic issues involved in the deployment of product platform development in an industrial network. The move entails identifying the types and characteristics of generically different product platform strategies and clarifying strategic motives and differences. Number...

  9. Influence of income on tertiary students acquisition of cellular products

    Directory of Open Access Journals (Sweden)

    G. A.P Drotsky

    2007-12-01

    Full Text Available Purpose: The purpose of the article is to determine whether there are any differences between high and low-income group students in their selection of a cellular phone brand or network operator. Design/Methodology/Approach: Four hypotheses are set to determine if there are any significant differences between the two income groups in current decision-making. It is established that there exist no significant difference between high and low-income students in their selection of cellular phones and network operators. The levels of agreement or disagreement on various statements do, however, give an indication of the importance that students place on aspects that they view as important when acquiring a cellular phone or network operator. Findings: In the article, it is established that no significant differences exist between the two income groups. The levels of agreement or disagreement indicate the importance that subscription method, social value, service quality and branding has on student decision-making. Implications: The article provides a better understanding of the influence that income plays in student's decision-making in acquiring cellular products and services. Possible future research in student cellular usage can be guided through the information obtained in this article. Originality/Value: The article provides information to cellular network operators, service providers and cellular phone manufactures regarding the influence of income on students' acquisition of cellular products and services. Information from the article can assist in the establishment of marketing plans for the student market by these role players.

  10. New product development with dynamic decision support

    CSIR Research Space (South Africa)

    Venter, JP

    2007-08-01

    Full Text Available The development of new and improved management methods for new product development is important. Existing methods suffer from a number of shortcomings, especially the ability to deal with a mixture of quantitative and qualitative data. The objective...

  11. New product development with dynamic decision support

    CSIR Research Space (South Africa)

    Venter, Jacobus P

    2009-06-01

    Full Text Available The development of new and improved management methods for new product development is important. Existing methods suffer from a number of shortcomings, especially their inability to deal with a mixture of quantitative and qualitative data...

  12. Caffeine products consumption habits of vilnius university students

    OpenAIRE

    Acus, Edgaras

    2017-01-01

    A small amount of caffeine in caffeine-containing products helps with stimulating labor activity, but an overdose of caffeine can cause a health hazard, so it is important to pay close attention to the use of caffeine-containing products. The use of psychoactive drugs is very important public health problem, because students attitude to addictive substances can influence their behavior in their family, the labor market and in society in general. Although caffeine is a natural product, but the...

  13. Research skills development in higher education students

    Directory of Open Access Journals (Sweden)

    Tiziana Priede Bergamini

    2014-03-01

    Full Text Available This case study presents the development of a research project in a third-year undergraduate course, Family Business Administration. The research project aimed at promoting research skills in students. The authors formed working groups of no more than six students, and each group had to select an original research topic after conducting a literature review. Students were guided by the teachers and provided with initial reading materials, as well as an activity rubric specifying the minimum requirements of a scientific paper. The activity evaluation consisted of two parts, a written article (group assessment and an oral presentation (individual assessment. After the activity concluded, students were asked to answer an online satisfaction survey. Results showed students viewed the activity as positive and appreciated the chance to develop several competencies, including research skills. The authors conclude several objectives were achieved, including: familiarize students with scientific research; make sure students are cable of finding information through primary sources; have students apply the knowledge acquired during the course; promote responsibility in students; cultivate in students the capacity to summarize ideas and expose them in a reasoned way; have students learn from the experiences and knowledge of others; and develop in students the capacity to synthesize all that information. -------------------------- El desarrollo de la capacidad investigadora en estudiantes de educación superior Resumen  Este estudio de caso presenta el desarrollo de un proyecto de investigación en la asignatura “Administración de la Empresa Familiar” de tercer curso. El proyecto de investigación tenía como propósito fomentar de forma específica la capacidad investigadora de los alumnos. Se formaron grupos de trabajo de no más de seis estudiantes, y cada grupo tenía que seleccionar un tema de investigación original tras realizar una búsqueda de

  14. Digital Production and Students as Learning Designers

    DEFF Research Database (Denmark)

    Sørensen, Birgitte Holm; Levinsen, Karin

    2014-01-01

    Today’s digitalization allows users to interact, collaborate, communicate and create user-generated content. The technology is intuitive and easy to use even for young children, and new learning opportunities emerge. Particularly, students’ production as a learning form benefits from digitalization...

  15. Students' Perception of West African Agricultural Productivity ...

    African Journals Online (AJOL)

    More than half (55.6%) of them were favourably disposed to the programme while respondents' farming background (r=3.740, p ≤ 0.05) was significantly related to their perception of the programme. It was recommended that West African Agricultural Productivity Programme officials should focus more attention on ...

  16. Key performance indicators: Global product development

    DEFF Research Database (Denmark)

    Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

    2014-01-01

    The decision to globalise parts of product development is a consequence of an increasingly competitive world market. The variety of risks and opportunities as a result of the decision make it difficult for management to evaluate if global product development has been successful. This paper invest...

  17. Market Dynamics and Productivity in Developing Countries ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    25 nov. 2009 ... Market Dynamics and Productivity in Developing Countries : Economic Reforms in the Middle East and North Africa. Book cover Market Dynamics and Productivity in Developing Countries: Economic Reforms in the Middle East. Directeur(s):. Khalid Sekkat. Maison(s) d'édition: Springer, CDRI. 25 novembre ...

  18. Short lecture series in sustainable product development

    DEFF Research Database (Denmark)

    McAloone, Tim C.

    2005-01-01

    Three lectures in sustainable product development models, methods and mindsets should give insight into the way of thinking about the environment when developing products. The first two lectures will guide you through: . Environmental problems in industry & life-cycle thinking . Professional...... methods for analysing and changing products’ environmental profiles . Sustainability as a driver for innovation...

  19. Challenging the sustainability of micro products development

    DEFF Research Database (Denmark)

    De Grave, Arnaud; Olsen, Stig Irving

    2006-01-01

    Environmental aspects are one of the biggest concerns regarding the future of manufacturing and product development sustainability. Furthermore, micro products and micro technologies are often seen as the next big thing in terms of possible mass market trend and boom. Many questions are raised...... and the intermediate parts which can be in-process created. Possible future trends for micro products development scheme involving environmental concerns are given....

  20. Coordiantion by using Product Specifications in Product Development

    DEFF Research Database (Denmark)

    Terkelsen, Søren Bendix

    1997-01-01

    This paper is based on a case study. It treats the coordination by generating product specifications in product development. This paper contains three very important aspects, which cause a need for coordination, and call attention to the coordination mechanisms. The three aspects are task...... uncertainty, task complexity, and dependencies between activities. If one want to select coordination mechanisms, which improve the performance in product development, it is very important to have a knowledge about these three aspects. In the following the aspects are identified in the literature...

  1. Using complexity theory to develop a student-directed interprofessional learning activity for 1220 healthcare students.

    Science.gov (United States)

    Jorm, Christine; Nisbet, Gillian; Roberts, Chris; Gordon, Christopher; Gentilcore, Stacey; Chen, Timothy F

    2016-08-08

    More and better interprofessional practice is predicated to be necessary to deliver good care to the patients of the future. However, universities struggle to create authentic learning activities that enable students to experience the dynamic interprofessional interactions common in healthcare and that can accommodate large interprofessional student cohorts. We investigated a large-scale mandatory interprofessional learning (IPL) activity for health professional students designed to promote social learning. A mixed methods research approach determined feasibility, acceptability and the extent to which student IPL outcomes were met. We developed an IPL activity founded in complexity theory to prepare students for future practice by engaging them in a self-directed (self-organised) learning activity with a diverse team, whose assessable products would be emergent creations. Complicated but authentic clinical cases (n = 12) were developed to challenge student teams (n = 5 or 6). Assessment consisted of a written management plan (academically marked) and a five-minute video (peer marked) designed to assess creative collaboration as well as provide evidence of integrated collective knowledge; the cohesive patient-centred management plan. All students (including the disciplines of diagnostic radiology, exercise physiology, medicine, nursing, occupational therapy, pharmacy, physiotherapy and speech pathology), completed all tasks successfully. Of the 26 % of students who completed the evaluation survey, 70 % agreed or strongly agreed that the IPL activity was worthwhile, and 87 % agreed or strongly agreed that their case study was relevant. Thematic analysis found overarching themes of engagement and collaboration-in-action suggesting that the IPL activity enabled students to achieve the intended learning objectives. Students recognised the contribution of others and described negotiation, collaboration and creation of new collective knowledge after working

  2. Using Student Scholarship To Develop Student Research and Writing Skills.

    Science.gov (United States)

    Ware, Mark E.; Badura, Amy S.; Davis, Stephen F.

    2002-01-01

    Focuses on the use of student publications in journals as a teaching tool. Explores the use of this technique in three contexts: (1) enabling students to understand experimental methodology; (2) teaching students about statistics; and (3) helping students learn more about the American Psychological Association (APA) writing style. (CMK)

  3. Managing Virtual Product Development team: A Review

    Directory of Open Access Journals (Sweden)

    Amir Mohammad Colabi

    2014-05-01

    Full Text Available Although there are many potential benefits associated with the use of virtual product development teams, exploiting these benefits requires an appropriate management. Managing virtual product development team is a critical issue as many of these teams fail to accomplish their goals. Review of previous literature shows that body of knowledge in managing virtual product development teams is fragmented and inconsistent. The main objective of this paper is to categorize the previous research on the subject of virtual product development team management in order to integrate the research into a thematic model and to enable recommendations for future research. So, this study reviews and summarizes empirical research in the field, also conceptual and qualitative papers, experiences, reports and explorative case studies. Results show that there are three fields of research in this area, including: Virtual production and Virtual team in Product Development, Managing virtual team in R&D[1] and product development, Managing global virtual product development teams. In order to organize previous studies in this area, a thematic map is proposed which shows the structure and sequence of research. Finally, a comprehensive discussion on the future directions in this field is proposed.

  4. Text comprehension and production in university students: text reformulation

    OpenAIRE

    Tittarelli, Ana María; Piacente, Telma

    2006-01-01

    This paper sets out to report on findings about features of task-specific reformulation observed in university students in the middle stretch of the Psychology degree course (N=58) and in a reference group of students from the degree courses in Modern Languages, Spanish and Library Studies (N=33) from the National University of La Plata (Argentina). Three types of reformulation were modeled: summary reformulation, comprehensive and productive reformulation.The study was based on a corpus of 6...

  5. Service-oriented product development strategies

    DEFF Research Database (Denmark)

    Tan, Adrian Ronald

    Manufacturing companies have traditionally focused their efforts on designing, developing and producing physical products for the market. Today, global competition, outsourcing and legislation commend that companies take greater responsibility of their products. This is driving some manufacturers...... to shift their business strategies from selling products (e.g. photocopying machines) to the provision of services (e.g. document services). Instead of the product itself, the activity and knowledge associated with the use of the product is perceived to be of more value to customers. In the research...... community, service-oriented approaches that embrace this change of business focus from individual products to total integrated customer solutions are termed Product/Service-Systems (PSS). The research in this thesis addresses the systematic design and development of PSS solutions in manufacturing firms...

  6. Developing product families based on architectures

    DEFF Research Database (Denmark)

    Harlou, Ulf

    2006-01-01

    family master plan (PFMP). The PFMP aims at modelling product families and especially variety of product families. The results of this thesis build on research literature and experiences from the industrial partners. Extensive verifications of the theory contributions, models and tools have been carried......The subject of this PhD thesis is development of product families based on architectures. Companies are introducing more and more product variants to fulfil the market demands. These new variants add complexity to many of the processes and systems in the companies. Reuse of standard designs (i.......e. design entities) and re-use of the way new products are developed can simplify the processes and systems. Case studies show that reuse can lead to reduction of cost and time-to-market of new products. One of the means for managing reuse of standard designs within product families are architectures...

  7. New product development: A batik multifunctional chair

    Science.gov (United States)

    Indrawati, Sri; Sukmaningsih, Nias

    2017-11-01

    The biggest challenge facing by Batik industry in ASEAN Economic Community (AEC) era is the greater number of fashion competitors both domestically and internationally. Based on that condition, the development of new product variants by considering product performance and price is needed. This research was conducted to develop batik products with a new target market. Products that being developed is batik multifunctional chair using integrated value engineering and analytic hierarchy process methods. This research has been done in several stages, ie. Information stage, creative stage, value analysis and product prototyping. The results of this research shows that the batik multifunctional chair product criteria are aesthetic (29%), multifunctional (34%) and ergonomic (37%). There are three new product design alternatives that successfully being developed. Based on value analysis, the product design alternatives that have the highest value is alternative design 2, the value is 2,37. The production cost for this design is Rp. 500.000,-. Alternative design 2 specification are using Mahoni wood, Batik parang rusak pattern with natural coloring process, can be used as table and fit with customer's body anthropometry. Then a batik multifunctional chair prototype is developed based on the best alternative design.

  8. Product development projects dynamics and emergent complexity

    CERN Document Server

    Schlick, Christopher

    2016-01-01

    This book primarily explores two topics: the representation of simultaneous, cooperative work processes in product development projects with the help of statistical models, and the assessment of their emergent complexity using a metric from theoretical physics (Effective Measure Complexity, EMC). It is intended to promote more effective management of development projects by shifting the focus from the structural complexity of the product being developed to the dynamic complexity of the development processes involved. The book is divided into four main parts, the first of which provides an introduction to vector autoregression models, periodic vector autoregression models and linear dynamical systems for modeling cooperative work in product development projects. The second part presents theoretical approaches for assessing complexity in the product development environment, while the third highlights and explains closed-form solutions for the complexity metric EMC for vector autoregression models and linear dyn...

  9. Integrated product development: Competencies meet and products arise

    DEFF Research Database (Denmark)

    Jensen, Birger Boutrup; Stacey, Julia

    2000-01-01

    and process competencies throughout the whole development process. Of course, this is easier said than done but integrating various competencies into the product development prepares the ground for a better balance and consequently more products. Databases, for instance are a good example of a tool that can...... the development process and diminish the risk of inventing sliced bread once again. Furthermore the databases may be used as a foundation for a more effective and frictionless communication across departments. The project has its starting point in case studies of three Danish food companies. A research group...

  10. Implementation effect of productive 4-stage field orientation on the student technopreneur skill in vocational schools

    Science.gov (United States)

    Ismail, Edy; Samsudi, Widjanarko, Dwi; Joyce, Peter; Stearns, Roman

    2018-03-01

    This model integrates project base learning by creating a product based on environmental needs. The Produktif Orientasi Lapangan 4 Tahap (POL4T) combines technical skills and entrepreneurial elements together in the learning process. This study is to implement the result of technopreneurship learning model development which is environment-oriented by combining technology and entrepreneurship components on Machining Skill Program. This study applies research and development design by optimizing experimental subject. Data were obtained from questionnaires, learning material validation, interpersonal, intrapersonal observation forms, skills, product, teachers and students' responses, and cognitive tasks. Expert validation and t-test calculation are applied to see how effective POL4T learning model. The result of the study is in the form of 4 steps learning model to enhance interpersonal and intrapersonal attitudes, develop practical products which orient to society and appropriate technology so that the products can have high selling value. The model is effective based on the students' post test result, which is better than the pre-test. The product obtained from POL4T model is proven to be better than the productive learning. POL4T model is recommended to be implemented for XI grade students. This is can develop entrepreneurial attitudes that are environment oriented, community needs and technical competencies students.

  11. Product development capability and marketing strategy for new durable products

    OpenAIRE

    Banerjee, Sumitro; Soberman, David A.

    2013-01-01

    Our objective is to understand how a firm’s product development capability (PDC) affects the launch strategy for a durable product that is sequentially improved over time in a market where consumers have heterogeneous valuations for quality. We show that the launch strategy of firms is affected by the degree to which consumers think ahead. However, only the strategy of firms with high PDC is affected by the observability of quality. When consumers are myopic and quality is observable, both hi...

  12. New Product Development Based on Demand

    OpenAIRE

    Davis-Krook, Shelby

    2015-01-01

    The purpose of this thesis was to determine how to develop a new product based on demand within a target market for an international company. Specifically looking at developing a new product line in an already developed brand, Alpha Performance. The research I have conducted in the following topics may help Alpha Performance if they choose to use my findings to create a one of a kind woman’s clothing line based on the demands of the Finnish market: target market research, product demand rese...

  13. Developing a Decision Model of Sustainable Product Design and Development from Product Servicizing in Taiwan

    Science.gov (United States)

    Huang, Yu-Chen; Tu, Jui-Che; Hung, So-Jeng

    2016-01-01

    In response to the global trend of low carbon and the concept of sustainable development, enterprises need to develop R&D for the manufacturing of energy-saving and sustainable products and low carbon products. Therefore, the purpose of this study was to construct a decision model for sustainable product design and development from product…

  14. Integrating ergonomics into the product development process

    DEFF Research Database (Denmark)

    Broberg, Ole

    1997-01-01

    and production engineers regarding information sources in problem solving, communication pattern, perception of ergonomics, motivation and requests to support tools and methods. These differences and the social and organizational contexts of the development process must be taken into account when considering......A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The purpose was to elucidate conditions and strategies for integrating ergonomics into the product development process thereby preventing ergonomic problems at the time...... of manufacture of new products. In reality the product development process is not a rational problem solving process and does not proceed in a sequential manner as decribed in engineering models. Instead it is a complex organizational process involving uncertainties, iterative elements and negotiation between...

  15. Understanding Female Students' Physics Identity Development

    Science.gov (United States)

    Hazari, Zahra

    2017-01-01

    While the gender gap in physics participation is a known problem, practical strategies that may improve the situation are not well understood. As physics education researchers, we draw on evidence to help inform us of what may or may not be working. To this end, physics identity has proven to be a useful framework for understanding and predicting participation in physics. Drawing on data from national surveys of college students, case studies in physics classes, and surveys of undergraduate women in physics, we identify strategies that are predictive of female students' physics identity development from their high school and undergraduate physics experiences. These findings will be discussed as well as future directions for using this research to increase the recruitment of women to physics-related careers. NSF Grant # 1431846.

  16. Development and production of Zenith fissile elements

    Energy Technology Data Exchange (ETDEWEB)

    George, D; Wheatley, C C.H.; Lloyd, H

    1959-06-15

    The development of a new glass-bonded alumina-uranium oxide composition forming the fissile component of the Zenith fuel elements is described, together with the production of the initial charge containing 15 Kg. of U{sub 235]; the composition is capable of retaining fission product gases at high temperatures. The description includes criticality considerations, details of manufacture, and production statistics of the 11,000 discs produced.

  17. Towards Integrated Product and Package Development

    OpenAIRE

    Bramklev, Caroline

    2007-01-01

    The global company operates from a number of locations worldwide, resulting in implications for the transport, handling and storage of product and parts transported within the company as well as between the company divisions and suppliers and/or consumers. In these companies, the package becomes a frequently used object to complement product features and achieve an effective and efficient means of logistics. In this context, it is interesting to integrate package development in the product...

  18. Evolutionary product development in working class housing

    NARCIS (Netherlands)

    Eger, Arthur O.; Lee, L.; van Lombaerde, P.

    2009-01-01

    The well‐known economical product life cycle describes the typical pattern of a product’s turnover over time. Although it has become a central concept in product development and marketing, it has severe practical limitations. Probably one of the most important limitations is that it is a purely

  19. Exploring purchasing involvement in product development

    NARCIS (Netherlands)

    Wynstra, J.Y.F.; Weggeman, M.C.D.P.; Weele, van A.J.

    2003-01-01

    With increasing outsourcing and the growing importance of product innovation as a means for creating competitive advantage, the integration of purchasing and product development processes has become a key issue for many firms. Although, consequently, the integration of purchasing and suppliers in

  20. Test Marketing in New Product Development

    Science.gov (United States)

    Klompmaker, Jay E.; And Others

    1976-01-01

    Discusses the role of test marketing in new product development, based on interviews with marketing executives. Attempts to clarify when a test market should be done, what its aims should be, and how it should be used. (JG)

  1. The Reality of Virtual Reality Product Development

    Science.gov (United States)

    Dever, Clark

    Virtual Reality and Augmented Reality are emerging areas of research and product development in enterprise companies. This talk will discuss industry standard tools and current areas of application in the commercial market. Attendees will gain insights into how to research, design, and (most importantly) ship, world class products. The presentation will recount the lessons learned to date developing a Virtual Reality tool to solve physics problems resulting from trying to perform aircraft maintenance on ships at sea.

  2. Co-ordinating Product Developing Activities

    DEFF Research Database (Denmark)

    Terkelsen, Søren Bendix

    1996-01-01

    The paper contains a presentation of research methods to be used in case studies in product development and a presentation on how to deal with Design Co-ordination according to litterature......The paper contains a presentation of research methods to be used in case studies in product development and a presentation on how to deal with Design Co-ordination according to litterature...

  3. Product News versus Advertising: An Exploration within a Student Population.

    Science.gov (United States)

    Hallahan, Kirk

    An exploratory survey (part of a larger study) examined the relative effectiveness of news versus advertising as sources of product information. Subjects, 140 undergraduate students enrolled in an introductory public speaking course or a course in visual communication, completed a 5-page media interest survey. Results indicated that news rates…

  4. Enviromental Development Plan: special nuclear materials production

    International Nuclear Information System (INIS)

    1980-07-01

    This Environmental Development Plan includes the process steps and facilities necessary for the production of plutonium and tritium for Government needs and the production of some other radioactive materials that will be used for heat and radiation sources by domestic and international customers. The production reactors and the spent fuel processing plants and their effluents are discussed, but the defense wastes from them are treated in a separate EDP. The scope does not include transportation, decontamination and decommissioning, safeguards and security, or use of the SNM products

  5. Lessons Learned In Developing The VACIS Products

    International Nuclear Information System (INIS)

    Orphan, Victor J.

    2011-01-01

    SAIC's development of VACIS provides useful 'lessons learned' in bridging the gap from an idea to a security or contraband detection product. From a gamma densitometer idea for solving a specific Customs Service (CS) requirement (detection of drugs in near-empty tanker trucks) in mid-1990's, SAIC developed a broad line of vehicle and cargo inspections systems (over 500 systems deployed to date) based on a gamma-ray radiographic imaging technique. This paper analyzes the reasons for the successful development of VACIS and attempts to identify ''lessons learned'' useful for future security and contraband detection product developments.

  6. Application of productive research tasks in working with gifted students in teaching Serbian language and literature

    Directory of Open Access Journals (Sweden)

    Stakić Mirjana M.

    2015-01-01

    Full Text Available In the work we examine the possibility of application of productive research tasks in working with gifted students in teaching Serbian language and literature. Using specific examples of interpretations of literary works we show that productive research assignments encourage students' creative and inventive expression, creativity, imagination and criticality and enable them to develop in accordance with their personality, individual preferences and abilities. In the examples of their use in problem solving, we determine how productive research tasks are conducive to gifted students who need to learn through problem solving and school work and to experience learning as a challenge. They present the basis for independent research, which allows gifted students to express their own creativity and the need to acquire new, challenging knowledge, and represent a powerful motivational tool that teachers can use in order to further develop their talent. Creative application of the productive research tasks in teaching Serbian language and literature is the possibility that the education of gifted students is not treated as elitist question, but to transform teaching process into development of giftedness and talent, where the role of the teacher in the teaching process rises to the role of the mentor.

  7. Human Resource Development for Uranium Production Cycle

    International Nuclear Information System (INIS)

    Ganguly, C.

    2014-01-01

    Concluding Remarks & Suggestions: • HRD will be one of the major challenges in the expanding nuclear power program in countries like China and India. • China and India get uranium raw material from domestic mines and international market. In addition, China has overseas uranium property. India is also exploring the possibility of overseas Joint Venture and uranium properties. For uranium production cycle there is a need for trained geologist, mining engineers, chemical and mechanical engineers. • There is a need for introducing specialization course on “uranium production cycle” at post graduate levels in government and private universities. Overseas Utilities and private firms in India engaged in nuclear power and fuel cycle activities may like to sponsor MTech students with assurance of employment after the successful completion of the course. • The IAEA may consider to extend Technical Assistance to universities in HRD in nuclear power and fuel cycle in general and uranium production cycle in particular - IAEA workshops, with participation of international experts, on uranium geology, mining, milling and safety and best practices in uranium production cycle will be of great help. • The IAEA – UPSAT could play an important role in HRD in uranium production cycle

  8. Impact of product development efforts on product introduction and product customization abilities

    DEFF Research Database (Denmark)

    Chaudhuri, Atanu; Dawar, Saloni

    2014-01-01

    This paper investigates the impact of efforts in new product development-manufacturing integration (NPDMI) on new product introduction (NPI) and product customization (PC) abilities and the moderating effects of product design complexity and importance of new product development order winners...... (NPIOW) on the above relationships. The results from the data on 136 Indian manufacturing plants show that NPDMI, product design complexity and NPIOW all have significant positive impact on NPI and PC abilities. Importance of NPIOW has a positive moderating effect on the relationship between NPDMI and PC...... ability change but product design complexity demonstrate no such effect on the above relationships....

  9. Student-Produced Movies as a Medium for Literacy Development

    Science.gov (United States)

    Young, Chase; Rasinski, Timothy V.

    2013-01-01

    In this article the authors integrate literacy with classroom-based technologies to create a student produced movie. The authors explain the steps to classroom movie production that deepens students' comprehension, engages students' in purposeful writing, and utilizes new technologies. (Contains 6 figures.)

  10. The Significance of Student Organizations to Leadership Development.

    Science.gov (United States)

    Rosch, David M; Collins, Jasmine D

    2017-09-01

    Student organizations have existed for almost as long as educational institutions have. This chapter examines the historical role of student organizations in developing leadership capacity in students, as well as their current roles on high school and collegiate campuses in creating transformational environments for student leadership learning and growth. © 2017 Wiley Periodicals, Inc., A Wiley Company.

  11. New product development processes for ICT-for-development projects

    CSIR Research Space (South Africa)

    McAlister, BN

    2012-08-01

    Full Text Available in developing regions of the world is increasing rapidly. A number of methods and practices have been used by organizations to develop and deliver such ICT solutions, but a need exists to formalize product development processes for use in the ICT...

  12. Improving Marketing's Contribution to New Product Development

    NARCIS (Netherlands)

    Drechsler, Wenzel; Natter, Martin; Leeflang, Peter S. H.

    In many firms, the marketing department plays a minor role in new product development (NPD). However, recent research demonstrates that marketing capabilities more strongly influence firm performance than other areas such as research and development. This finding underscores the importance of

  13. TA Professional Development: A Graduate Student's Perspective

    Science.gov (United States)

    Alicea-Munoz, Emily

    Graduate Teaching Assistants (GTAs) are essential for teaching large introductory physics classes. In such courses, undergraduates spend approximately half of their in-class contact time in instructional environments (e.g., labs and recitations) supervised by GTAs, which means GTAs can have a large impact on student learning. Therefore it is crucial to adequately prepare GTAs before they first enter the classroom, and to offer them continued support throughout. Since many of the skills required to become effective teachers will also be relevant to their future research careers, it is useful for a GTA preparation program to also include professional development strategies. But what exactly do GTAs get out of these programs? The School of Physics at Georgia Tech runs a preparation and mentoring program for GTAs that focuses on pedagogical knowledge, physics content, and professional development, as well as their intersections. Nearly seventy graduate students have gone through this program in the three years since it was established. Here we discuss the impact this program has had on our GTAs, from their own point of view: the program's effect on their teaching abilities, how it has influenced their attitudes towards teaching, what elements they have found useful, and what changes they have suggested to its curriculum. We find that, in general, GTAs are more receptive when the curriculum is more hands-on and they are presented with frequent opportunities for practice and feedback.

  14. Using market information in product development

    DEFF Research Database (Denmark)

    Søndergaard, Helle Alsted; Harmsen, Hanne

    2007-01-01

    development are also fulfilled since the development teams recognize the value of the information and actively use it in their product development decision making. However, the means-end approach cannot (in its present form) reveal experienced quality since the approach includes no trying of the product...... of abstraction in consumers' minds. At the same time they are reminded that this information should feed into the process of making decisions in product development....... on the understanding of consumers' vertical and horizontal decision structure) combined with considerations on effective internal use of the information. Design/methodology/approach - The suggested model is applied in case studies in an action research project, and experiences with the application are discussed...

  15. PLM system support for modular product development

    DEFF Research Database (Denmark)

    Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik; Harlou, Ulf

    2015-01-01

    A modular design strategy both enables, but also demands, parallelism in design activities and collaboration between a diversity of disciplines in companies, which often involves supporting computer-based tools for enhancing interaction, design management, and communication. Product data management...... (PDM) and product lifecycle management (PLM) systems offer support by automating and managing some of the operational complexity of modular design activities. PLM system tools are used for handling a variety of product definitions, to manage workflow of development activities, and to measure relational...... properties such as cost and performance. Companies often use a PLM tool for management of CAD files, documents, and drawings, but they do not take advantage of the full potential of the PLM system to support the development activities of modular product designs. The key result of this paper...

  16. Knowledge Management in Product Development Projects

    International Nuclear Information System (INIS)

    Sheik Muhamad, S.

    2016-01-01

    Full text: Product data management system (PDM) solutions control vast quantities of information generated by engineers during the product development process. They provide vaulting capabilities to control access to shared data,workflow to distribute it, and configured product structures to relate it to product components. Nuclear Malaysia has the desire to have a proper CAD management system and this is achieved with the use of PDM system to manage all their designs throughout the product lifecycle, i.e., for drawing distribution and design change. The type of documents that Nuclear Malaysia manages are CAD files (as generated by CATIA, AUTOCAD), engineering files, reports, project files, documents (WORD, PDF), spreadsheet (EXCEL), bills of material, manufacturing processes and drawings. Besides managing drawings, we also want to control and manage engineering changes (ECO & ECR) in electronic format. (author

  17. Effects of Educational Productivity on Career Aspiration among United States High School Students.

    Science.gov (United States)

    Wang, Jianjun; Ma, Xin

    2001-01-01

    Using structural equation modeling and data on 10th-grade students from the Longitudinal Study of American Youth, a model was developed to show the relationship to career aspiration of eight indicators of "educational productivity": mathematics achievement; motivation; instructional quantity and quality; home, class, and peer environment; and mass…

  18. Eden Institute: Using Health Games for ASD Student and Staff Development.

    Science.gov (United States)

    Ferguson, Moderator Bill; McCool, Participants Thomas; Gasdia, Dominique; Sharp, Tim; Breeman, Lisa; Parikh, Nish; Taub, Bob; Finkler, Nina

    2013-02-01

    Eden Autism Services is a leading-edge resource for children and adults suffering from more severe effects of autism spectrum disorder (ASD). The strategic use of games in the development of students, staff, teachers, parents, friends, and employers has advanced the quality of life of Eden's students and, consequently, their relationships, productivity, and happiness.

  19. Sharia Bank Product Development through Mudhrabah Investment

    OpenAIRE

    Trimulato Trimulato

    2016-01-01

    Sharia banking now has a strong legal framework with the presence of law number 21 of 2008 on sharia banking in Indonesia. This regulation enforces sharia banking to develop products to achieve the targeted market share of 5%. In third-party fund products, more innovation is needed to attract people to entrust their funds in sharia banks. The visible data of mudharabah fund raising deposit products in March 2013 amounted to Rp100.746.000.000 and Rp115.728.000.000 in mudharabah deposits was vi...

  20. Research and development for ethylbenzene production

    Energy Technology Data Exchange (ETDEWEB)

    Xue, Mingwei; Sun, Hongmin; Shen, Zhenhao; Zhang, Bin; Yang, Weimin [SINOPEC Shanghai Research Institute of Petrochemical Technology (China); Huan, Mingyao

    2013-11-01

    Ethylbenzene (EB) is important raw material for the production of styrene. Now, EB is mainly produced by the alkylation of benzene with ethylene catalyzed by zeolite in vapour phase or liquid phase. Shanghai Research Institute of Petrochemical Technology (SRIPT) began to research the catalysts for the production of ethylbenezene in 1993. With near 20 years work, three series of catalysts for the alkylation of benzene with pure ethylene, dilute ethylene and ethanol are in commerical in China. This paper mainly introduced the research and development of SRIPT for the EB production. (orig.)

  1. Development Considerations for Nanocrystal Drug Products.

    Science.gov (United States)

    Chen, Mei-Ling; John, Mathew; Lee, Sau L; Tyner, Katherine M

    2017-05-01

    Nanocrystal technology has emerged as a valuable tool for facilitating the delivery of poorly water-soluble active pharmaceutical ingredients (APIs) and enhancing API bioavailability. To date, the US Food and Drug Administration (FDA) has received over 80 applications for drug products containing nanocrystals. These products can be delivered by different routes of administration and are used in a variety of therapeutic areas. To aid in identifying key developmental considerations for these products, a retrospective analysis was performed on the submissions received by the FDA to date. Over 60% of the submissions were for the oral route of administration. Based on the Biopharmaceutics Classification System (BCS), most nanocrystal drugs submitted to the FDA are class II compounds that possess low aqueous solubility and high intestinal permeability. Impact of food on drug bioavailability was reduced for most nanocrystal formulations as compared with their micronized counterparts. For all routes of administration, dose proportionality was observed for some, but not all, nanocrystal products. Particular emphasis in the development of nanocrystal products was placed on the in-process tests and controls at critical manufacturing steps (such as milling process), mitigation and control of process-related impurities, and the stability of APIs or polymorphic form (s) during manufacturing and upon storage. This emphasis resulted in identifying challenges to the development of these products including accurate determination of particle size (distribution) of drug substance and/or nanocrystal colloidal dispersion, identification of polymorphic form (s), and establishment of drug substance/product specifications.

  2. Development of RI Target Production Technology

    International Nuclear Information System (INIS)

    Jeong, Do Young; Ko, Kwang Hoon; Kim, Cheol Jung; Kim, Taek Soo; Rho, Si Pyo; Park, Hyun Min; Lim, Gwon; Cha, Yong Ho; Han, Jae Min

    2010-04-01

    This project was accomplished with an aim of productive technical development on the 'enriched target' which is used essentially in radioisotope production. The research was advanced systematically with target production pilot system configuration and core technical development. We composed Yb-176 productive pilot system which equip the chemical purification technique of medical treatment level and proved its capability. Possibilities to separate Zn-67 by the method of using the polarizing light in principle and to separate Zn-70 by the method of using the double optical pumping in theory were also proved. RI target production technologies are recognized excessively with monopolistic techniques of part atomic energy advanced nations such as Russia and US and they are come, but we prepared the opportunity will be able to complete a full cycle of like (RI material production -> RI target production -> RI application) with this project accomplishment. When considering only the direct demand of stable isotope which is used in various industrial, we forecast with the fact that RI target markets will become larger with the approximately 5 billion dollars in 2020 and this technology will contribute in the domestic rising industry creation with high value added

  3. Innovation in Product Development: Notes for course 41629

    DEFF Research Database (Denmark)

    McAloone, Timothy Charles; Tan, Adrian

    2003-01-01

    The course on Innovatino in Product Development attempts to identify and understand the nature of innovation and product development and their important factors. The course takes both a theoretical and a practical approach and employs a mix of lectures, project work and group discussion. Format...... insight. Course content The following aspects of innovation in product development are considered: - Humans and products - Needs and products - Product life - Teams creating products - Products creating business - Product development models - Organising product development - Product development tools...... - The future of product development...

  4. Smart consumer products with a pathfinder product development strategy

    Science.gov (United States)

    Robertson, Alec

    1994-09-01

    It is generally acknowledged that technologies diffuse through industry and that the rate of diffusion varies both within different industries and according to the circumstances. Innovation is a process involving risk, especially during the adoption and adaptation of a powerful new technology. Central to a consumer products success using new technology is the quality of their designs and the nature of their forms. Form is of prime importance in influencing the purchasing decisions of consumers and it is also influential in determining the relationships between people in its use environment. The acceptance of a new product into the world is often unduly ad hoc. Many failures are created for each success and there are few guidelines to assist the formulation of a strategy for creating an appropriate form. It is suggested below that success of consumer products incorporating 'smart structures' may be determined not only by the function of products and systems, but also by the form they take. The definition of a desirable product form depends entirely on the point of view taken: technological, commercial, ecological, cultural, and social. However any design using new will incorporate the old and the new. The probability of acceptance of a new product is enhanced by maintaining a fine balance between imaginative and creative form and that with which people are familiar and prefer: a new design may be rejected if it is too novel and unfamiliar, or too traditional. The acceptance of a new product and its subsequent development depends on the success designers and engineers have when dealing with the initial forms, particularly using new technology such as 'smart structures'.

  5. Strategies for fuel cell product development. Developing fuel cell products in the technology supply chain

    International Nuclear Information System (INIS)

    Hellman, H.L.

    2004-01-01

    Due to the high cost of research and development and the broad spectrum of knowledge and competences required to develop fuel cell products, many product-developing firms outsource fuel cell technology, either partly or completely. This article addresses the inter-firm process of fuel cell product development from an Industrial Design Engineering perspective. The fuel cell product development can currently be characterised by a high degree of economic and technical uncertainty. Regarding the technology uncertainty: product-developing firms are more often then not unfamiliar with fuel cell technology technology. Yet there is a high interface complexity between the technology supplied and the product in which it is to be incorporated. In this paper the information exchange in three current fuel cell product development projects is analysed to determine the information required by a product designer to develop a fuel cell product. Technology transfer literature suggests that transfer effectiveness is greatest when the type of technology (technology uncertainty) and the type of relationship between the technology supplier and the recipient are carefully matched. In this line of thinking this paper proposes that the information required by a designer, determined by the design strategy and product/system volume, should be met by an appropriate level of communication interactivity with a technology specialist. (author)

  6. DEVELOPING LINGUISTIC SKILLS AND ABILITIES IN EMP STUDENTS

    Directory of Open Access Journals (Sweden)

    Nataša Milosavljević

    2012-03-01

    Full Text Available English for medical purposes falls within the category of discipline-specific language learning. It is characterized by specific linguistic features and requires specific study that is possible to carry out using specially designed programmes. Reading skill is one way of learning strategy of English for medical purposes. Most often, students use this skill in order to obtain information for some particular topic from the area of medical science, or because they need some sort of instruction in order to carry out certain task. Vocabulary acquisition plays a very important role in EMP teaching. It is achieved best through learning vocabulary in context, rather than in isolation. One of the most important questions in EMP teaching is related to what grammatical constructions should be analysed and emphasised. Some types of these activities would include, for example, asking students to find examples of one particular structure in the text or fill in the blanks with the missing forms such as tenses, passive forms, prepositions, etc. Speaking skill represents productive skill the aim of which is communication. In order for foreign language communication to be suucessful, a student should know linguistic and cultural features of native speakers and follow certain rules and conventions that are not easy to define. It is of crucial importance that during teaching process students develop strategies and techniques that will help them use linguistic structures fluently, apply language in different situations, take part in discussions, and use acquired vocabulary in accurate and precise way.

  7. Development of a quarterly referral productivity report.

    Science.gov (United States)

    Wu, Cai; Sandoval, Alex; Hicks, Katrina N; Edwards, Tim J; Green, Lyle D

    2007-10-11

    The Office of Physician Relations at The University of Texas M. D. Anderson Cancer Center (MDACC) has developed a dynamic referral productivity reporting tool for its Multidisciplinary Care Centers (MCC). The tool leverages information within the institution's Enterprise Information Warehouse (EIW) using business intelligent software Hyperion Intelligent Explorer Suite 8.3. the referral productivity reports are intended to provide each MCC with detailed referral and registration data outlining how, and from where, patients arrive here for treatment. The reports supports operational and strategic initiatives aimed at improving referral processes and market related program development.

  8. Performance Measurement in Global Product Development

    DEFF Research Database (Denmark)

    Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

    2013-01-01

    there is a requirement for the process to be monitored and measured relative to the business strategy of an organisation. It was found that performance measurement is a process that helps achieve sustainable business success, encouraging a learning culture within organisations. To this day, much of the research into how...... performance is measured has focussed on the process of product development. However, exploration of performance measurement related to global product development is relatively unexplored and a need for further research is evident. This paper contributes towards understanding how performance is measured...

  9. Customer/User Workshops in Product development

    DEFF Research Database (Denmark)

    Brandt, Eva; Binder, Thomas

    1997-01-01

    In a recent product development project, we have taken part in establishing and organising a series of workshops with a group of customers/users of a future product line through out the development project. The workshops is a kind of informal meetingplace for engineering, marketing, customers...... and discuss experiences with this kind of collaborative fora. We have tried to demonstrate that having an on-going dialogue with users/customers also during detailed design in not only a means to keep 'the voive of the customer alive'. We have found that the workshops have an important impact on securing...

  10. Developing Technology Products - A Physicist's Perspective

    Science.gov (United States)

    Burka, Michael

    2014-03-01

    There are many physicists working in the industrial sector. We rarely have the word physicist in our job title; we are far more commonly called engineers or scientists. But, we are physicists, and we succeed because our training in physics has given us the habits of mind and the technical skills that one needs to solve complex technical challenges. This talk will explore the transition from physics research to technology product development using examples from my own career, first as a postdoctoral fellow and research scientist on the LIGO project, and then developing products in the spectroscopy, telecommunications, and medical device industries. Approaches to identifying and pursuing opportunities in industry will be discussed.

  11. Success rates for product development strategies in new drug development.

    Science.gov (United States)

    Dahlin, E; Nelson, G M; Haynes, M; Sargeant, F

    2016-04-01

    While research has examined the likelihood that drugs progress across phases of clinical trials, no research to date has examined the types of product development strategies that are the most likely to be successful in clinical trials. This research seeks to identify the strategies that are most likely to reach the market-those generated using a novel product development strategy or strategies that combine a company's expertise with both drugs and indications, which we call combined experience strategies. We evaluate the success of product development strategies in the drug development process for a sample of 2562 clinical trials completed by 406 US pharmaceutical companies. To identify product development strategies, we coded each clinical trial according to whether it consisted of an indication or a drug that was new to the firm. Accordingly, a clinical trial that consists of both an indication and a drug that were both new to the firm represents a novel product development strategy; indication experience is a product development strategy that consists of an indication that a firm had tested previously in a clinical trial, but with a drug that was new to the firm; drug experience is a product development strategy that consists of a drug that the firm had prior experience testing in clinical trials, but with an indication that was new to the firm; combined experience consists of both a drug and an indication that the firm had experience testing in clinical trials. Success rates for product development strategies across clinical phases were calculated for the clinical trials in our sample. Combined experience strategies had the highest success rate. More than three and a half percent (0·036) of the trials that combined experience with drugs and indications eventually reached the market. The next most successful strategy is drug experience (0·025) with novel strategies trailing closely (0·024). Indication experience strategies are the least successful (0·008

  12. MODEL DEVELOPMENT OF NURSING STUDENT LOYALTY IN POLITEKNIK OF HEALTH

    Directory of Open Access Journals (Sweden)

    Hammad Hammad

    2017-04-01

    Full Text Available Introduction: Loyalty of nursing student is an important factor that nursing education should pay attention in order to compete with other nursing educations; involved by perceived value, expectation, and quality assurance in nursing higher education. The purpose of this study was to develop a loyalty model of nursing student in nursing higher education. Methods: This study was an explanatory research with cross sectional approach. Population were nursing student in Poltekkes Banjarmasin, with 112 samples which is selected by proportional random sampling. Data was collected by giving questionnaire and analyzed by partial least square. Result: Result of this study indicates that was an effect of costumer expectation on quality assurance in nursing higher education, there was effect of costumer expectation on perceived value in nursing student, there was an effect of customer expectation on student satisfaction (4 there was effect of quality assurance in nursing higher education, there wasn’t any affect of quality assurance in nursing higher education on student satisfaction, there was effect of perceived value in nursing student on student satisfaction, there was effect of student satisfaction on student loyalty. Discussion: Overall result of this research were, student loyalty in nursing higher education developed by student satisfaction. Student satisfaction formed by perceived value. Perceived value developed from two aspects quality assurance, and student expectation, quality assurance of higher education wasn’t directly effect to student sasfaction. However, indirectly effect through student perceived value. Student satisfaction in nursing higher education was stronger effect than any other variable in this loyalty model. Loyalty model in this research can be use for improvement student loyalty on health education that focused on improvement student satisfaction without deny the other aspect. Further research is needed to analyze word of

  13. Involving Students in Developing Math Tests

    Science.gov (United States)

    Rapke, Tina

    2017-01-01

    Many studies have claimed that traditional testing actually promotes students' use of superficial approaches to learning. When preparing to take tests, students typically memorize and cram rather than understanding the material and gaining new perspectives. This article describes how the author recast traditional tests by having students take a…

  14. Recent developments in drying of food products

    Science.gov (United States)

    Valarmathi, T. N.; Sekar, S.; Purushothaman, M.; Sekar, S. D.; Rama Sharath Reddy, Maddela; Reddy, Kancham Reddy Naveen Kumar

    2017-05-01

    Drying is a dehydration process to preserve agricultural products for long period usage. The most common and cheapest method is open sun drying in which the products are simply laid on ground, road, mats, roof, etc. But the open sun drying has some disadvantages like dependent on good weather, contamination by dust, birds and animals consume a considerable quantity, slow drying rate and damages due to strong winds and rain. To overcome these difficulties solar dryers are developed with closed environment for drying agricultural products effectively. To obtain good quality food with reduced energy consumption, selection of appropriate drying process and proper input parameters is essential. In recent years several researchers across the world have developed new drying systems for improving the product quality, increasing the drying rate, decreasing the energy consumption, etc. Some of the new systems are fluidized bed, vibrated fluidized bed, desiccant, microwave, vacuum, freeze, infrared, intermittent, electro hydrodynamic and hybrid dryers. In this review the most recent progress in the field of drying of agricultural food products such as new methods, new products and modeling and optimization techniques has been presented. Challenges and future directions are also highlighted. The review will be useful for new researchers entering into this ever needed and ever growing field of engineering.

  15. Increasing Student Interest and Comprehension of Production Planning and Control and Operations Performance Measurement Concepts Using a Production Line Game

    Science.gov (United States)

    Cox, James F., III; Walker, Edward D., II

    2005-01-01

    Production planning and control (PPC) systems and operations performance measures are topics that students generally find both boring and difficult to understand. In the article, the authors present a production line game that they have found to be an effective tool to increase student interest in the topics as well as student comprehension. The…

  16. Analysis of university student awareness of radiation exposures from consumer products

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seung Hwan [Korean Advance Institute of Science and Technology, Daejeon (Korea, Republic of); Cho, Kun Woo [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2016-05-15

    Since the terminology 'radioactive consumer product' is not quite familiar to the public and is often considered as negative and detrimental things, the educational curriculum is essential for establishing reliability of nuclear energy related and for the development of better communication strategy of radiation risk with the public. To provide base data which is valuable for establishing efficient curriculum of education and training about radiation safety, it is necessary to apprehend the different level of awareness of radiation exposures classified by various consumer products. On November 2014, a question investigation about asking awareness level of radiation exposure from various consumer products was done for university students who are highly educated. The object students are studied at a four-year-course universities which is located at Daejeon City. Although the average awareness level is comparatively low, the awareness of senior students, who major in radiation, nuclear related departments and male students are relatively high. On the other hand, the awareness of freshman, sophomore, junior students, who do not major in radiation, nuclear related departments and female students are relatively low. It is necessary to provide various information to avoid unnecessary concerns and misconceptions about radiation exposure. This paper will be an instrument for efficient establishment of curriculum of education and training related with radiation safety.

  17. Analysis of university student awareness of radiation exposures from consumer products

    International Nuclear Information System (INIS)

    Kim, Seung Hwan; Cho, Kun Woo

    2016-01-01

    Since the terminology 'radioactive consumer product' is not quite familiar to the public and is often considered as negative and detrimental things, the educational curriculum is essential for establishing reliability of nuclear energy related and for the development of better communication strategy of radiation risk with the public. To provide base data which is valuable for establishing efficient curriculum of education and training about radiation safety, it is necessary to apprehend the different level of awareness of radiation exposures classified by various consumer products. On November 2014, a question investigation about asking awareness level of radiation exposure from various consumer products was done for university students who are highly educated. The object students are studied at a four-year-course universities which is located at Daejeon City. Although the average awareness level is comparatively low, the awareness of senior students, who major in radiation, nuclear related departments and male students are relatively high. On the other hand, the awareness of freshman, sophomore, junior students, who do not major in radiation, nuclear related departments and female students are relatively low. It is necessary to provide various information to avoid unnecessary concerns and misconceptions about radiation exposure. This paper will be an instrument for efficient establishment of curriculum of education and training related with radiation safety

  18. Sharia Bank Product Development through Mudhrabah Investment

    Directory of Open Access Journals (Sweden)

    Trimulato Trimulato

    2016-12-01

    Full Text Available Sharia banking now has a strong legal framework with the presence of law number 21 of 2008 on sharia banking in Indonesia. This regulation enforces sharia banking to develop products to achieve the targeted market share of 5%. In third-party fund products, more innovation is needed to attract people to entrust their funds in sharia banks. The visible data of mudharabah fund raising deposit products in March 2013 amounted to Rp100.746.000.000 and Rp115.728.000.000 in mudharabah deposits was visible on April 2014, which is an increase of less than 2% each month. This research uses a qualitative descriptive methodology, and is focused on fund raising products in shari'ah banking, particularly in the form of mudharabah investments for a definitive result. The results show that sharia banking requires innovative fund raising for third-party products, such as mudharabah investment products. These investments provide certainty of results despite using mudharabah and are based on the certainty that projector financing has been agreed by the sharia with the creditor banks. This investment product can be offered to both individuals and groups/collectives. Keywords: sharia banking, investment, mudharabah

  19. Mechatronics design principles for biotechnology product development.

    Science.gov (United States)

    Mandenius, Carl-Fredrik; Björkman, Mats

    2010-05-01

    Traditionally, biotechnology design has focused on the manufacture of chemicals and biologics. Still, a majority of biotechnology products that appear on the market today is the result of mechanical-electric (mechatronic) construction. For these, the biological components play decisive roles in the design solution; the biological entities are either integral parts of the design, or are transformed by the mechatronic system. This article explains how the development and production engineering design principles used for typical mechanical products can be adapted to the demands of biotechnology products, and how electronics, mechanics and biology can be integrated more successfully. We discuss three emerging areas of biotechnology in which mechatronic design principles can apply: stem cell manufacture, artificial organs, and bioreactors. Copyright 2010 Elsevier Ltd. All rights reserved.

  20. Reference model for apparel product development

    Directory of Open Access Journals (Sweden)

    Isabel Cristina Moretti

    2017-03-01

    Full Text Available The purpose of this paper was to develop a reference model for the implementation of the process of product development (PDP for apparel. The tool was developed through an interactive process of comparison between theoretical. Managers in companies and professionals working in this market can utilize the reference model as a source for the organization and improvement of the PDP for apparel and the universities as a reference source for systematized teaching of this process. This model represents the first comprehensive attempt to develop an instrument at a detailed level (macro phases, phases, activities, inputs and outputs at each stage and at the gates to systematize the PDP process for fashion products and to consider its particularities.

  1. Sustainable development perspectives of poultry production

    DEFF Research Database (Denmark)

    Vaarst, Mette; Steenfeldt, Sanna; Horsted, Klaus

    2015-01-01

    or more of the four aspects, e.g., pollution and antibiotic use, biodiversity (environmental aspects), conditions for farm workers and animal welfare (social aspects), governance of the food chain (institutional aspects), and the development of poultry from a valuable food to a cheap staple food...... throughout major parts of the world (economic aspects). There are numerous potential pathways for sustainable development of poultry production. Poultry are living, sentient animals that can be well integrated into many different types of urban and rural farming systems, where they benefit from...... and contribute to such systems and to the livelihood of households around the globe, with special emphasis on women. Furthermore, local production provides potential for production with minimum transport and, concomitantly, minimum usage of fossil fuels. Among the terrestrial animals, poultry has the best...

  2. Center Planning and Development Student Engineer

    Science.gov (United States)

    Jenkins, Kenneth T.

    2013-01-01

    This fall I was the Student Trainee (Engineering) Pathways Intern (co-op) at the Kennedy Space Center (KSC) in the Center Planning Development (CPD) Directorate. CPD works with commercial companies who are interested using KSCs unique capabilities in spaceflight, spacecraft processing, ground systems and Research Development (RD) projects that fall in line with NASAs mission and goals. CPD is divided into four (4) groups: (1) AD-A, which works on the Master Planning for center, (2) AD-B (where I am), which works on project management and integration, (3) AD-C, which works on partnership development, and (4) AD-T, which works on the RD aspects of partnerships. CPDs main goal is to one day make KSC the worlds largest spaceport and maintain the center as a leader in space exploration. CPD is a very diverse group with employees having a wide knowledge of not only the Space Shuttle, but also that of the Apollo era. Our director of CPD, Scott Colloredo, is on the advisory board for Commercial Space Operations (CSO) and has a degree at ERAU. I worked on a number of different tasks for AD-B, as well as CPD, that includes, but not limited to: reviewing and reissuing engineering drawings from the Apollo and Shuttle eras, to supporting NASA rocket launches (MAVEN), and working on actual agreementsproposals that will be used in the partnership process with multiple partners. Most of the work I have done is sensitive information and cannot be disclosed.

  3. Consumer evaluations of products from developing countries

    NARCIS (Netherlands)

    Verlegh, P.W.J.

    2002-01-01

    Consumers use country of origin as a signal or proxy for product quality. Consumers have little confidence in the ability of less developed countries to produce high quality goods. On the other hand emotionally attachment to a country or associations of "exoticness" or "authenticity" can lead to a

  4. Consumer-driven food product development

    NARCIS (Netherlands)

    Linnemann, A.R.; Benner, M.; Verkerk, R.; Boekel, van M.A.J.S.

    2006-01-01

    Food product development needs to be based on consumers' needs and wishes to be successful. Factors that have become relevant in this respect are presented and their impact discussed, like mass-individualization, globalization and an altered interpretation of the food quality concept by consumers.

  5. Indicators for establishing SME product development networks

    NARCIS (Netherlands)

    Post, G.J.J.; Hop, L.; Aken, van J.E.

    2001-01-01

    The results of research into SME product development networks are presented. The paper provides insight to the process of establishing such networks and the use of indicators in the design and monitoring of this process. It is based on five extensive case studies and in addition on several in-depth

  6. Integrated Micro Product and Technology Development

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

  7. Development of hydrogen production technology using FBR

    International Nuclear Information System (INIS)

    Ono, Kiyoshi; Otaki, Akira; Chikazawa, Yoshitaka; Nakagiri, Toshio; Sato, Hiroyuki; Sekine, Takashi; Ooka, Makoto

    2004-06-01

    This report describes the features of technology, the schedule and the organization for the research and development regarding the hydrogen production technology using FBR thermal energy. Now, the hydrogen production system is proposed as one of new business models for FBR deployment. This system is the production of hydrogen either thermal energy at approximately from 500degC to 550degC or electricity produced by a sodium cooled FBR. Hydrogen is expected to be one of the future clean secondary energies without carbon-dioxide emission. Meanwhile the global energy demand will increase, especially in Asian countries, and the energy supply by fossil fuels is not the best choice considering the green house effect and the stability of energy supply. The development of the hydrogen technology using FBR that satisfies 'sustainable energy development' and 'utilization of energies free from environmental pollution' will be one of the promising options. Based on the above mentioned recognition, we propose the direction of the development, the issues to be solved, the time schedule, the budget, and the organization for R and D of three hydrogen production technologies, the thermochemical hybrid process, the low temperature steam reforming process, and the high temperature steam electrolysis process in JNC. (author)

  8. Increasing Sales by Developing Production Consortiums.

    Science.gov (United States)

    Smith, Christopher A.; Russo, Robert

    Intended to help rehabilitation facility administrators increase organizational income from manufacturing and/or contracted service sources, this document provides a decision-making model for the development of a production consortium. The document consists of five chapters and two appendices. Chapter 1 defines the consortium concept, explains…

  9. User-centeredness and Product Development

    DEFF Research Database (Denmark)

    Binder, Thomas; Brandt, Eva; Buur, Jacob

    1998-01-01

    TLA life cycle of approximately five years; Is it a new specialist domain that has to find its place among all the other specialities involved in product development; Or is it really so that we should continue co claim that what we are involved in has a calling for everyone engaged in bringing...

  10. Implementing Life Cycle Assessment in Product development

    DEFF Research Database (Denmark)

    Bhander, Gurbakhash Singh

    2003-01-01

    The overall aim of the paper is to provide an understanding of the environmental issues involved in the early stages of product development and the capacity of life cycle assessment techniques to address these issues. The paper aims to outline the problems for the designer in evaluating the envir......The overall aim of the paper is to provide an understanding of the environmental issues involved in the early stages of product development and the capacity of life cycle assessment techniques to address these issues. The paper aims to outline the problems for the designer in evaluating......, and of the opportunities for introducing environmental criteria in the design process through meeting the information requirements of the designer on the different life cycle stages, producing an in-depth understanding of the attitudes of practitioners among product developers to the subject area, and an understanding...... of possible future directions for product development. An Environmentally Conscious Design method is introduced and trade-offs are presented between design degrees of freedom and environmental solutions. Life cycle design frameworks and strategies are addressed. The paper collects experiences and ideas around...

  11. The develop of technology production in Spain

    International Nuclear Information System (INIS)

    Fernandez Labastida, J. M.

    2007-01-01

    Spanish Science and Technology system has been very effective in scientific production but not in technology transfer to economic activities. A cultural change is needed to improve the knowledge transfer mechanisms. Some specific actions are proposed in order to develop useful instruments to achieve a better technology transfer system. (Author)

  12. A systematic approach for introducing innovative product design in courses with engineering and nonengineering students.

    Science.gov (United States)

    Patterson, P E

    2007-01-01

    In our new global economy, biomedical product development teams need to be even more innovative in an environment constrained by fewer resources with less time from concept to market. Teams are often comprised of individuals spread around the world. To simulate this setting, we revised an existing course to incorporate teams of on-campus and distance students, with each team including both engineers and other specialties. Through interactive lectures and projects, we presented a systematic approach to innovation that should be useful to engineers and non-engineers alike. Students found the course challenging and exciting, displaying an improved ability to work in distributed teams and in developing innovative design solutions.

  13. The Effectiveness of Geography Student Worksheet to Develop Learning Experiences for High School Students

    Science.gov (United States)

    Utami, Wiwik Sri; Sumarmi; Ruja, I. Nyoman; Utaya, Sugeng

    2016-01-01

    The purpose of this study is to examine the effectiveness of geography student worksheet in developing high school students' learning experiences. The student worksheet was planned to gain opportunity to develop creative and geography skills. The effectiveness is assessed from the contribution of the worksheets in improving the skills of…

  14. Teaching Bioethics via the Production of Student-Generated Videos

    Science.gov (United States)

    Willmott, Christopher J. R.

    2015-01-01

    There is growing recognition that science is not conducted in a vacuum and that advances in the biosciences have ethical and social implications for the wider community. An exercise is described in which undergraduate students work in teams to produce short videos about the science and ethical dimensions of current developments in biomedicine.…

  15. Challenges of managing the development of breakthrough products in Japan

    NARCIS (Netherlands)

    Song, X.M.; Parry, M.E.

    1999-01-01

    We propose a contingency model and hypothesize that increases in product innovativeness weaken the influence of product synergies and development proficiencies on product performance. We incorporate these hypotheses in a path model linking measures of product synergy, development proficiency,

  16. Developing a Support Tool for Global Product Development Decisions

    DEFF Research Database (Denmark)

    Søndergaard, Erik Stefan; Ahmed-Kristensen, Saeema

    2016-01-01

    This paper investigates how global product development decisions are made through a multiple-case study in three Danish engineering. The paper identifies which information and methods are applied for making decisions and how decision-making can be supported based on previous experience. The paper...... presents results from 51 decisions made in the three companies, and based on the results of the studies a framework for a decision-support tool is outlined and discussed. The paper rounds off with an identification of future research opportunities in the area of global product development and decision-making....

  17. Metric integration architecture for product development

    Science.gov (United States)

    Sieger, David B.

    1997-06-01

    Present-day product development endeavors utilize the concurrent engineering philosophy as a logical means for incorporating a variety of viewpoints into the design of products. Since this approach provides no explicit procedural provisions, it is necessary to establish at least a mental coupling with a known design process model. The central feature of all such models is the management and transformation of information. While these models assist in structuring the design process, characterizing the basic flow of operations that are involved, they provide no guidance facilities. The significance of this feature, and the role it plays in the time required to develop products, is increasing in importance due to the inherent process dynamics, system/component complexities, and competitive forces. The methodology presented in this paper involves the use of a hierarchical system structure, discrete event system specification (DEVS), and multidimensional state variable based metrics. This approach is unique in its capability to quantify designer's actions throughout product development, provide recommendations about subsequent activity selection, and coordinate distributed activities of designers and/or design teams across all design stages. Conceptual design tool implementation results are used to demonstrate the utility of this technique in improving the incremental decision making process.

  18. A COMPARISON OF SOCIAL SKILLS OF STUDENTS WITH VISUAL IMPAIRMENTS AND TYPICALLY DEVELOPING STUDENTS

    OpenAIRE

    Demir, Fatih Emrah; Ozdemir, Selda

    2016-01-01

    The purpose of this study was to compare the social skills of students with visual impairments with social skills of typically developing students. The study groups consisted of 64 students with visual impairments and 68 typically developing students from the first to fourth grade. The Social Skills Rating System (SSRS) Teacher Form was used to evaluate the social skills of both groups. The results of the study indicated that cooperation, assertiveness, and self-control sub-scale scores and o...

  19. Sustainability Assessment Model in Product Development

    Science.gov (United States)

    Turan, Faiz Mohd; Johan, Kartina; Nor, Nik Hisyamudin Muhd; Omar, Badrul

    2017-08-01

    Faster and more efficient development of innovative and sustainable products has become the focus for manufacturing companies in order to remain competitive in today’s technologically driven world. Design concept evaluation which is the end of conceptual design is one of the most critical decision points. It relates to the final success of product development, because poor criteria assessment in design concept evaluation can rarely compensated at the later stages. Furthermore, consumers, investors, shareholders and even competitors are basing their decisions on what to buy or invest in, from whom, and also on what company report, and sustainability is one of a critical component. In this research, a new methodology of sustainability assessment in product development for Malaysian industry has been developed using integration of green project management, new scale of “Weighting criteria” and Rough-Grey Analysis. This method will help design engineers to improve the effectiveness and objectivity of the sustainable design concept evaluation, enable them to make better-informed decisions before finalising their choice and consequently create value to the company or industry. The new framework is expected to provide an alternative to existing methods.

  20. Student Evaluation of Teaching: An Instrument and a Development Process

    Science.gov (United States)

    Alok, Kumar

    2011-01-01

    This article describes the process of faculty-led development of a student evaluation of teaching instrument at Centurion School of Rural Enterprise Management, a management institute in India. The instrument was to focus on teacher behaviors that students get an opportunity to observe. Teachers and students jointly contributed a number of…

  1. Student Motivation to Study Abroad and Their Intercultural Development

    Science.gov (United States)

    Anderson, Philip H.; Hubbard, Ann; Lawton, Leigh

    2015-01-01

    To date, student motivation for electing to study abroad has not been incorporated into study abroad research as a potential factor influencing intercultural development. The authors of this study hypothesize that a student's motivation for studying abroad plays an important role in influencing the program a student selects and in determining what…

  2. Chemical Reactions: What Understanding Do Students with Blindness Develop?

    Science.gov (United States)

    Lewis, Amy L. Micklos; Bodner, George M.

    2013-01-01

    This study examined the understanding of chemical equations developed by three students with blindness who were enrolled in the same secondary-school chemistry class. The students were interviewed while interpreting and balancing chemical equations. During the course of these interviews, the students produced diagrams using Braille symbols that…

  3. Development of Malayalam Handwriting Scale for School Students in Kerala

    Science.gov (United States)

    Gafoor, K. Abdul; Naseer, A. R.

    2015-01-01

    With a view to support instruction, formative and summative assessment and to provide model handwriting performance for students to compare their own performance, a Malayalam handwriting scale is developed. Data from 2640 school students belonging to Malappuram, Palakkad and Kozhikode districts, sampled by taking 240 students per each grade…

  4. Student Developed Knowledge Portfolios from a Soil Fertility Course

    Science.gov (United States)

    Sindelar, Meghan; Mamo, Martha; Wingeyer, Ana

    2018-01-01

    Students who have completed the Soil Nutrient Relationships course at the University of Nebraska-Lincoln often contact instructors once they have begun full-time work, seeking reminders of specific concepts. These students either did not take or keep detailed notes during the course. To assist students, instructors have developed a portfolio…

  5. Development of Processed Products from Guapple

    Directory of Open Access Journals (Sweden)

    Teresita Acevedo

    1995-12-01

    Full Text Available The study aimed to develop processed products from guapple. Characterization of the guapple fruit was intially conducted before proceeding to formulation studies.The following characteristics of the guapple fruit were observed: color of outer skin - yellow green with Munsell notation of 10 Y7/6, color of inner flesh - off white with Munsell notation of 7.5Y 8/2; texture, 20.4-37.1 mm; average weight per piece, from 219 to 420 gms; ph, 3.7; titrable acidity (citric acid, 0.34%, and soluble solids, 2.6° Brix.The identified processed products from guapple were puree, pickles, and preserves. Standardized processes and formulations for each of these products were developed in semi-pilot scale. Removal of the skin for the guapple preserves and pickles was facilitated using 5% brine-l % CaCI2.Suitable packaging materials were also identified. Flexible films were used for guapple puree while glass jars and flexible films were found to be satisfactory both for guapple pickles and preserves.Physico-chemical, microbiological, and sensory evaluation were done after two months of storage. Based on these tests, the pasteurization process of 180° F for 20 minutes for puree and 10 minutes for preserves and pickles, was found to make the products commercially sterile.

  6. Developing symbiotic consortia for lignocellulosic biofuel production

    Energy Technology Data Exchange (ETDEWEB)

    Zuroff, Trevor R.; Curtis, Wayne R. [Pennsylvania State Univ., University Park, PA (United States). Dept. of Chemical Engineering

    2012-02-15

    The search for petroleum alternatives has motivated intense research into biological breakdown of lignocellulose to produce liquid fuels such as ethanol. Degradation of lignocellulose for biofuel production is a difficult process which is limited by, among other factors, the recalcitrance of lignocellulose and biological toxicity of the products. Consolidated bioprocessing has been suggested as an efficient and economical method of producing low value products from lignocellulose; however, it is not clear whether this would be accomplished more efficiently with a single organism or community of organisms. This review highlights examples of mixtures of microbes in the context of conceptual models for developing symbiotic consortia for biofuel production from lignocellulose. Engineering a symbiosis within consortia is a putative means of improving both process efficiency and stability relative to monoculture. Because microbes often interact and exist attached to surfaces, quorum sensing and biofilm formation are also discussed in terms of consortia development and stability. An engineered, symbiotic culture of multiple organisms may be a means of assembling a novel combination of metabolic capabilities that can efficiently produce biofuel from lignocellulose. (orig.)

  7. Decision Making Processes for Global Product Development - a Case Study

    DEFF Research Database (Denmark)

    Søndergaard, Erik Stefan; Ahmed-Kristensen, Saeema

    2015-01-01

    Global Product Development (GPD), outsourcing and offshoring of product development is a widespread phenomenon on today’s global economy, and consequently most engineering manufacturing companies will have to make decisions regarding how to organise their product development activities globally...

  8. Digital Technology and Student Cognitive Development

    Science.gov (United States)

    Cavanaugh, J. Michael; Giapponi, Catherine C.; Golden, Timothy D.

    2016-01-01

    Digital technology has proven a beguiling, some even venture addictive, presence in the lives of our 21st century (millennial) students. And while screen technology may offer select cognitive benefits, there is mounting evidence in the cognitive neuroscience literature that digital technology is restructuring the way our students read and think,…

  9. Measure of Development for Student Conduct Administration

    Science.gov (United States)

    Nelson, Adam Ross

    2017-01-01

    Student Conduct Administration (SCA) is one of many names for the processes and procedures through which colleges and universities manage student behavior. Despite the accessibility of quasi-experimental design (QED) in the study of education (Schlotter, Schwerdt, & Woessman, 2011), the existing scholarship has yet to generate strong empirical…

  10. Collaborative product development and situated knowledge contexts

    DEFF Research Database (Denmark)

    Andersen, Poul Houman; Munksgaard, Kristin B.

    2009-01-01

    Purpose - The purpose of this paper is to develop a framework for understanding how problem formulation, information search and division of work in new product development (NPD) activities is shaped by mind sets vested in organizations with diverging positions in the value chain and correspondingly...... situated knowledge contexts. The authors aim to focus on how this influences the marketability of new product ideas. Design/methodology/approach - The empirical data are derived from exploratory observation studies of NPD meetings and interviews of involved managers and specialists in three business dyads....... The cases involve ingredient and meat suppliers, retail chains and marketing agencies located in Denmark. Findings - The authors show that the scope and organization of NPD activities indeed are shaped by the combinations of situated knowledge contexts involved. An important intervening variable however...

  11. Drivers of Changes in Product Development Rules

    DEFF Research Database (Denmark)

    Christiansen, John K.; Varnes, Claus J.

    2015-01-01

    regimes. However, the analysis here indicates that there are different drivers, both internal and external, that cause companies to adopt new rules or modify their existing ones, such as changes in organizational structures, organizational conflicts, and changes in ownership or strategy. In addition......Purpose: - The purpose of this research is to investigate the drivers that induce companies to change their rules for managing product development. Most companies use a form of rule-based management approach, but surprisingly little is known about what makes companies change these rules...... 10 years based on three rounds of interviews with 40 managers. Findings: - Previous research has assumed that the dynamics of product development rules are based on internal learning processes, and that increasingly competent management will stimulate the implementation of newer and more complex rule...

  12. Top Management Involvement in New Product Development

    DEFF Research Database (Denmark)

    Felekoglu, Burcu; Maier, Anja; Moultrie, James

    2010-01-01

    a broader conceptual space than this participation. This paper reviews the literature on top management involvement in new product development (NPD) and discusses relevance of different theoretical perspectives from other disciplines such as management, organisational behaviour and communication to analyse......Involvement of top managers in new product development (NPD) is a critical factor affecting NPD performance and frequently considered to be the participation of top management to certain activities in NPD or their NPD related behaviours. However, “Top management involvement in NPD” occupies...... antecedents, realisation and consequences of top management involvement in NPD. It is argued that top management has different involvement at different NPD levels: organisation level and project level. Resulting from this literature review, a tentative framework for top management involvement in NPD...

  13. Model of the Product Development Lifecycle.

    Energy Technology Data Exchange (ETDEWEB)

    He, Sunny L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Roe, Natalie H. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wood, Evan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nachtigal, Noel M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Helms, Jovana [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-01

    While the increased use of Commercial Off-The-Shelf information technology equipment has presented opportunities for improved cost effectiveness and flexibility, the corresponding loss of control over the product's development creates unique vulnerabilities and security concerns. Of particular interest is the possibility of a supply chain attack. A comprehensive model for the lifecycle of hardware and software products is proposed based on a survey of existing literature from academic, government, and industry sources. Seven major lifecycle stages are identified and defined: (1) Requirements, (2) Design, (3) Manufacturing for hardware and Development for software, (4) Testing, (5) Distribution, (6) Use and Maintenance, and (7) Disposal. The model is then applied to examine the risk of attacks at various stages of the lifecycle.

  14. Decisions on new product development under uncertainties

    Science.gov (United States)

    Huang, Yeu-Shiang; Liu, Li-Chen; Ho, Jyh-Wen

    2015-04-01

    In an intensively competitive market, developing a new product has become a valuable strategy for companies to establish their market positions and enhance their competitive advantages. Therefore, it is essential to effectively manage the process of new product development (NPD). However, since various problems may arise in NPD projects, managers should set up some milestones and subsequently construct evaluative mechanisms to assess their feasibility. This paper employed the approach of Bayesian decision analysis to deal with the two crucial uncertainties for NPD, which are the future market share and the responses of competitors. The proposed decision process can provide a systematic analytical procedure to determine whether an NPD project should be continued or not under the consideration of whether effective usage is being made of the organisational resources. Accordingly, the proposed decision model can assist the managers in effectively addressing the NPD issue under the competitive market.

  15. Recent Development of Education for Gifted Students in Taiwan.

    Science.gov (United States)

    Tsai, Den-Mo

    1993-01-01

    This paper reviews the historical development of special education for gifted students in Taiwan; provides an overview of three chronological stages in the development of programming; describes educational opportunities and problems; and proposes recommendations for program development. (JDD)

  16. Development and implementation of an herbal and natural product elective in undergraduate medical education.

    Science.gov (United States)

    Karpa, Kelly

    2012-05-22

    Medical students have consistently expressed interest in learning about alternative healing modalities, especially herbal and natural products. To fill this void in medical education at our institution, a novel elective was developed and implemented for fourth year medical students. This herbal/natural product course uses guest lecturers, classroom presentations, and active learning mechanisms that include experiential rotations, case-based learning, and team-based learning to increase student knowledge of herbal/natural product safety and efficacy. Knowledge outcomes were evaluated via administration of a pre- and post-course test (paired student t-test). End-of-course evaluations (Likert-type questions and narrative responses) were used to assess student opinion of knowledge and skills imparted by the elective and overall course content (mean, standard deviation). Over three academic years, 23 students have enrolled in this elective. More than 60% of participants have been female and nearly half of the students (43%) have pursued residencies in primary care. Completion of the course significantly increased student knowledge of common herbal/natural product mechanisms, uses, adverse effects, and drug-interactions as determined by a pre- and post-course knowledge assessment (45%±10% versus 78%±6%; pvariety of activities to which they were exposed and the open classroom discussions that resulted. While students tended to view some alternative medical systems with skepticism, they still believed it was valuable to learn what these modalities encompass. Development and implementation of a herbal/natural product elective that engages undergraduate medical students through active learning mechanisms and critical analysis of the literature has proven effective in increasing knowledge outcomes and is deemed to be a valuable curricular addition by student participants. In the future, it will be of interest to explore mechanisms for expanding the course to reach a larger

  17. Medical Countermeasure Product Development - Alternatives Paper

    Science.gov (United States)

    2014-04-01

    Maritime Research Laboratory of the Defence Science and Technology Organisation (DSTO) in 1995 as a Research Scientist. In January 1997 he was promoted... biosecurity role to supply to the Government and the World Health Organisation (WHO). In the future there may be circumstances where there is no... standards to solve national priority CBR or infectious disease threats. The PPP may enable Government to: • access and grow product development

  18. Transferring World Class Production to Developing Countries

    DEFF Research Database (Denmark)

    Bruun, Peter; Mefford, Robert Neil

    1998-01-01

    Strategic reasons for firms to transfer world-class production methods and technology to developing countries are discussed and the importance of the management aspects of technology transfer are emphasized. A five stage model of the technology transfer process which bases the choice of the produ....... The barriers and challenges of implementation are considered, and a socio-technical systems approach is proposed as a way to addapt to local conditions....

  19. Learning within a product development working practice

    OpenAIRE

    Bang Mathiasen, John

    2012-01-01

    The subject matter chosen for this PhD, learning within a Product Development (PD) working practice, might give rise to wonder given that I have a theoretical education within supply chain management, achieved practical experience as senior supply chain manager and finally, conducted a great many lectures dealing with supply chain management. Offhand, it may seem an odd choice, but my practical experience, briefly illustrated in the below, triggered the decision to study learni...

  20. Development of fission Mo production technology

    International Nuclear Information System (INIS)

    Kim, B. K.; Park, K. B.; Jun, B. J.; Park, J. H.; Choung, W. M.; Lee, K. I.; Woo, M. S.; Whang, D. S.; Kim, Y. K.; Yoo, J. H.; Sohn, D. S.; Lee, Y. W.; Na, S. H.; Koo, Y. H.; Hwang, D. H.; Joo, P. K.

    1997-08-01

    The feasibility study is accomplished in this project for the development of fission moly production. The KAERI process proposed for development in KAERI is discussed together with those of the American Cintichem and Russian IPPE, each of which would be plausible for introduction whenever the indigenous development is not much feasible. For the conceptual design of the KAERI irradiation target, analysis method is set up and some preliminary analysis is performed accordingly for the candidate design. To establish chemical process concepts for the afore-mentioned three processes, characteristics, operation conditions, and the management of the generated wastes are investigated. Basic requirements of hotcell facilities for chemical processing and a possible way of utilizing the existing hotcells are discussed in parallel with the counter-measures for the construction of new hotcell facilities. Various conditions of target irradiation for fission moly production in Hanaro are analyzed. Plan for introduction of the relevant technology introduction and for procurement of highly enriched uranium are considered. On the basis of assuming some conditions, the economic feasibility study for fission moly production is also overviewed. (author). 22 refs., 28 tabs., 24 figs

  1. LEAN PRACTICES FOR PRODUCT DEVELOPMENT PROCESS

    Directory of Open Access Journals (Sweden)

    Guilherme Luz Tortorella

    2015-06-01

    Full Text Available Lean product development (LPD is an approach that comprises lean principles and management practices that aim to reduce waste and improve operational effectiveness throughout the entire value stream in continuous improvement endless journey. Due to that, the ability to innovate, change and learn continuously is a key element in order to minimize product development problems. Several LPD techniques are presented in the literature as possible enablers for lean implementation. However, little has been known about the impact of these enablers on the problems related to product development processes. Thus, this paper aims to examine the relationship between five LPD practices’ constructs and the occurrence frequency of eleven LPD problems’ constructs in companies that are implementing lean. Moreover, the identification of relevant relationships between LPD practices’ and problems’ constructs may contribute to specify the contexts in which problems are expected to occur. The study sample comprises sixty four companies already undergoing lean implementation both in shop floor and offices area. The results indicate that the same practices’ constructs, which are deemed as influential for minimizing LPD problems, present different relationship intensities among them.

  2. Environmental Priorities In Strategic Product Development

    DEFF Research Database (Denmark)

    Simon, M; Poole, S.; Sweatman, A.

    2000-01-01

    -design framework consisting of analyse, report, prioritize and improve steps, at both strategic and operational levels. Tests the framework by application in an Electrolux subsidiary producing vacuum cleaners, tabulates LCA results for one product and its constituents and components. Concludes that prioritizing......Reports progress of the Design for Environmental Decision Support (DEEDS) project, gives the project's aim as the development of appropriate tools and methods for eco-design for use in the electrical/electronics sector. Bases development of the tools and methods on the results of a survey of 19...

  3. GELCASTING: From laboratory development toward industrial production

    Energy Technology Data Exchange (ETDEWEB)

    Omatete, O.O.; Janney, M.A.; Nunn, S.D.

    1995-07-01

    Gelcasting, a ceramic forming process, was developed to overcome some of the limitations of other complex-shape forming techniques such as injection molding and slip casting. In gelcasting, a concentrated slurry of ceramic powder in a solution of organic monomers is poured into a mold and then polymerized in-situ to form a green body in the shape of the mold cavity. Thus, it is a combination of polymer chemistry with slip processing and represents minimal departure from standard ceramic processing. The simplicity of the process has attracted industrial partners and by collaboration between them and the developers, the process is being advanced from the laboratory toward industrial production.

  4. A Leadership Elective Course Developed and Taught by Graduate Students

    Science.gov (United States)

    Garza, Oscar W.; Witry, Matthew J.; Chang, Elizabeth H.; Letendre, Donald E.; Trewet, CoraLynn B.

    2013-01-01

    Objective. To develop and implement a flexible-credit elective course to empower student pharmacists to develop lifelong leadership skills and provide teaching practice opportunities for graduate students. Design. An elective course focusing on leadership development for second- and third-year doctor of pharmacy (PharmD) students was designed and taught by 4 graduate students under the mentorship of 2 faculty members. Student pharmacists could enroll in a 1-, 2-, or 3-credit-hour version of the course. Assessment. Attainment of course objectives was measured using student pharmacist reflection papers and continuing professional development portfolios. Additionally, self-assessments of graduate students and faculty members delivering the course were conducted. In their responses on course evaluations, student pharmacists indicated they found the course a valuable learning experience. Graduate students found course development to be challenging but useful in developing faculty skills. Conclusion. This flexible-credit elective course taught by graduate students was an innovative way to offer formal leadership instruction using limited college resources. PMID:24371347

  5. Word Problem Solving of Students with Autistic Spectrum Disorders and Students with Typical Development

    Science.gov (United States)

    Bae, Young Seh

    2013-01-01

    Mathematical Word Problem Solving of Students with Autistic Spectrum Disorders and Students with Typical Development Young Seh Bae This study investigated mathematical word problem solving and the factors associated with the solution paths adopted by two groups of participants (N=40), students with autism spectrum disorders (ASDs) and typically…

  6. Development and Validation of an Exploratory Measure to Assess Student Coping: The Student Coping Scale

    Science.gov (United States)

    Boujut, Emile

    2013-01-01

    Students is a very specific population according to their manner to cope with stress. A coping questionnaire for students was developed and administered to 1100 French students at the beginning of the term (T1). Principal Component Analysis of responses, followed by varimax rotations, yielded three factors accounting for 50.5% of the total…

  7. South Africa's nuclear hydrogen production development programme

    International Nuclear Information System (INIS)

    Van Ravenswaay, J.P.; Van Niekerk, F.; Kriek, R.J.; Blom, E.; Krieg, H.M.; Van Niekerk, W.M.K.; Van der Merwe, F.; Vosloo, H.C.M.

    2010-01-01

    In May 2007 the South African Cabinet approved a National Hydrogen and Fuel Cell Technologies R and D and Innovation Strategy. The strategy will focus on research, development and innovation for: i) wealth creation through high value-added manufacturing and developing platinum group metals catalysis; ii) building on the existing knowledge in high temperature gas-cooled reactors (HTGR) and coal gasification Fischer-Tropsch technology, to develop local cost-competitive hydrogen production solutions; iii) to promote equity and inclusion in the economic benefits from South Africa's natural resource base. As part of the roll-out strategy, the South African Department of Science and Technology (DST) created three Competence Centres (CC), including a Hydrogen Infrastructure Competence Centre hosted by the North-West University (NWU) and the Council for Scientific and Industrial Research (CSIR). The Hydrogen Infrastructure CC is tasked with developing hydrogen production, storage, distribution as well as codes and standards programmes within the framework of the DST strategic objectives to ensure strategic national innovation over the next fifteen years. One of the focus areas of the Hydrogen Infrastructure CC will be on large scale CO 2 free hydrogen production through thermochemical water-splitting using nuclear heat from a suitable heat source such as a HTGR and the subsequent use of the hydrogen in applications such as the coal-to-liquid process and the steel industry. This paper will report on the status of the programme for thermochemical water-splitting as well as the associated projects for component and technology development envisaged in the Hydrogen Infrastructure CC. The paper will further elaborate on current and future collaboration opportunities as well as expected outputs and deliverables. (authors)

  8. Testing Software Development Project Productivity Model

    Science.gov (United States)

    Lipkin, Ilya

    Software development is an increasingly influential factor in today's business environment, and a major issue affecting software development is how an organization estimates projects. If the organization underestimates cost, schedule, and quality requirements, the end results will not meet customer needs. On the other hand, if the organization overestimates these criteria, resources that could have been used more profitably will be wasted. There is no accurate model or measure available that can guide an organization in a quest for software development, with existing estimation models often underestimating software development efforts as much as 500 to 600 percent. To address this issue, existing models usually are calibrated using local data with a small sample size, with resulting estimates not offering improved cost analysis. This study presents a conceptual model for accurately estimating software development, based on an extensive literature review and theoretical analysis based on Sociotechnical Systems (STS) theory. The conceptual model serves as a solution to bridge organizational and technological factors and is validated using an empirical dataset provided by the DoD. Practical implications of this study allow for practitioners to concentrate on specific constructs of interest that provide the best value for the least amount of time. This study outlines key contributing constructs that are unique for Software Size E-SLOC, Man-hours Spent, and Quality of the Product, those constructs having the largest contribution to project productivity. This study discusses customer characteristics and provides a framework for a simplified project analysis for source selection evaluation and audit task reviews for the customers and suppliers. Theoretical contributions of this study provide an initial theory-based hypothesized project productivity model that can be used as a generic overall model across several application domains such as IT, Command and Control

  9. Affordability for sustainable energy development products

    International Nuclear Information System (INIS)

    Riley, Paul H.

    2014-01-01

    Highlights: • Clean cookstoves that also generate electricity improve affordability. • Excel spreadsheet model to assist stakeholders to choose optimum technology. • Presents views for each stakeholder villager, village and country. • By adding certain capital costs, affordability and sustainability are improved. • Affordability is highly dependent on carbon credits and social understandings. - Abstract: Clean burning products, for example cooking stoves, can reduce household air pollution (HAP), which prematurely kills 3.5 million people each year. By careful selection of components into a product package with micro-finance used for the capital payment, barriers to large-scale uptake of products that remove HAP are reduced. Such products reduce smoke from cooking and the lighting from electricity produced, eliminates smoke from kerosene lamps. A bottom-up financial model, that is cognisant of end user social needs, has been developed to compare different products for use in rural areas of developing countries. The model is freely available for use by researchers and has the ability to assist in the analysis of changing assumptions. Business views of an individual villager, the village itself and a country view are presented. The model shows that affordability (defined as the effect on household expenses as a result of a product purchase) and recognition of end-user social needs are as important as product cost. The effects of large-scale deployment (greater that 10 million per year) are described together with level of subsidy required by the poorest people. With the assumptions given, the model shows that pico-hydro is the most cost effective, but not generally available, one thermo-acoustic technology option does not require subsidy, but it is only at technology readiness level 2 (NASA definition) therefore costs are predicted and very large investment in manufacturing capability is needed to meet the cost target. Thermo-electric is currently the only

  10. Development of radioisotope production in the Philippines

    Energy Technology Data Exchange (ETDEWEB)

    Cabalfin, E G [Philippine Nuclear Research Institute, Quezon (Philippines)

    1998-10-01

    The Philippine Nuclear Research Institute (PNRI) started its activities on radioisotope production more than three decades ago, when the Philippine Research Reactor (PRR-1) started operating at its full rated power of 1 MW. Since then, several radionuclides in different chemical forms, were routinely produced and supplied for use in nuclear medicine, industry, agriculture, research and training, until the conversion of the PRR-1 to a 3 MW TRIGA type reactor. After the criticality test of the upgraded reactor, a leak was discovered in the pool liner. With the repair of the reactor still ongoing, routine radioisotope production activities have been reduced to dispensing of imported bulk {sup 131}I. In the Philippines, radioisotopes are widely used in nuclear medicine, with {sup 131}I and {sup 99m}Tc as the major radionuclides of interest. Thus the present radioisotope production program of PNRI is directed to meet this demand. With the technical assistance of the International Atomic Energy Agency (IAEA), PNRI is setting up a new {sup 131}I production facility. The in-cell equipment have been installed and tested using both inactive and active target, obtained from BATAN, Indonesia. In order to meet the need of producing {sup 99}Mo-{sup 99m}Tc generators, based on low specific activity reactor-produced {sup 99}Mo, research and development work on the preparation of {sup 99m}Tc gel generators is ongoing. (author)

  11. The Development of Entrepreneurial Culture Among Students ...

    African Journals Online (AJOL)

    pc

    2018-03-05

    Mar 5, 2018 ... Abdellah University and the promotion of this culture among students ... the first definition of organizational culture in 1951: "the culture ..... [8] SCHEIN E, Organizational Culture and Leadership, Jossey-Bass, 1985, 2nd.

  12. Career Development among Undergraduate Students of Madda ...

    African Journals Online (AJOL)

    from field selection, marketing and recruitment potentialities to interests and other ... 29. 12. Social Science. Tourism Management. 18. -. Geography. -. -. History. 18 ..... therapy on irrational career thoughts among secondary school students in ...

  13. Using Game Development to Engage Students in Science and Technology

    Science.gov (United States)

    Wiacek, John

    2011-01-01

    Game design workshops, camps and activities engage K-12 students In STEM disciplines that use game engine and development tools. Game development will have students create games and simulations that Will inspire them to love technology while learning math, physics, and,logic. By using tools such as Gamemaker, Alice, Unity, Gamesalad and others, students will get a sense of confidence and accomplishment creating games and simulations.

  14. Development of radioisotope production in JAERI

    International Nuclear Information System (INIS)

    Yamabayashi, H.; Kato, H.; Umezawa, H.

    1992-01-01

    Since 1962, we have been developing methods and technology for producing a wide variety of processed radioisotopes and sealed radiation sources by using the JAERI's reactors, JRR-2, JRR-3, JRR-4 and JMTR, and providing the products to domestic users. At present, 29 nuclides and 31 products are on our list of processed radioisotopes. Some of those isotopes such as P-32, S-35, Cr-51 and short-lived nuclides are being produced regularly for distribution, but most of the rest are produced upon request. The radiation sources of Co-60 needles and Ir-192 pellets for industrial use and Gd-153 pellet, 7 kinds of Ir-192 and Au-198 grain for medical applications are produced and distributed routinely. (author)

  15. Management Control in New Product Development

    DEFF Research Database (Denmark)

    Jørgensen, Brian; Messner, Martin

    2009-01-01

    organizations to better manage tensions between efficiency and flexibility, which is arguably a key issue in many organizations today. Our paper contributes to this stream of research by detailing how enabling control functions in the particular setting of new product development. To this end, we draw upon......Several studies in management control have drawn upon the concepts of coercive and enabling forms of bureaucracy (Adler and Borys 1996) to discuss how the features of a control system may affect employees' attitudes toward control. This question is relevant because enabling forms of control allow...... and flexibility. In addition, our paper sets out to explore how strategic change can influence the operation of enabling control. Focusing on the introduction of a new product strategy in our case organization, we describe employees' repair efforts in adapting the control system to their own needs. We find...

  16. LIVESTOCK PRODUCTION FOR A SUSTAINABLE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Giuseppe Maiorano

    2014-02-01

    Full Text Available The development of society is based on the existence of food resources. The past half-century has seen marked growth in food production, allowing for a dramatic decrease in the proportion of the world’s people that are hungry, despite a doubling of the total population. Recently, the FAO predicted a higher increase of the consumption of foods of animal origin by 2050. So far, the increased demand for food has been supplied by agriculture due to an improvement of techniques, an increase of cultivated land areas and an increase of water and energy consumption. The environmental assessment of human activities is presently a hot topic. It is not only important from an ecological perspective, but also from the view of efficient utilization of limited natural resources. The livestock sector that increasingly competes for scarce resources (land, water, and energy has a severe impact on air, water and soil quality because of its emissions. The environmental impact of food of animal origin is currently quantified by so-called CO2eq-footprints. Therefore, in the future, it will be necessary to achieve a sustainable supply of food, especially of animal origin, because land and other production factors are not unlimited resources. This lecture deals with related problems linked to the production of foods of animal origin and some possible sustainable solutions for the increasing demand of these products, by means of a detailed analysis of the carbon footprint by the livestock, as well as the land requirement, biodiversity, energy and water footprint in livestock production.

  17. Influence of students' physical development on their professional teaching

    Directory of Open Access Journals (Sweden)

    Tishchenko V.A.

    2012-02-01

    Full Text Available The purpose of the article is research of interdependence of bodily condition and results of having time of students. Supervisions were conducted above 229 students. Physical preparedness of students on indexes: level of quickness (run 100 m, level of endurance (run 1000 m, level of power possibilities (undercutting on a cross-beam, level speed-power preparations (standing broad jump in length was estimated. The results of dynamics of physical and mental development of students are presented. Close cross-correlation dependence is set between the indexes of mental capacity and bodily condition of students.

  18. The Relevance of Software Development Education for Students

    Science.gov (United States)

    Liebenberg, Janet; Huisman, Magda; Mentz, Elsa

    2015-01-01

    Despite a widely-acknowledged shortage of software developers, and reports of a gap between industry needs and software education, the possible gap between students' needs and software development education has not been explored in detail. In their university education, students want to take courses and carry out projects that clearly relate to…

  19. Aggressive Neglect, Matrix Organization, and Student Development Implementation

    Science.gov (United States)

    Borland, David T.

    1977-01-01

    Organizational facilitation of student development is a significant but difficult process in colleges and universities with traditional priorities on academic concerns. Organizational factors are analyzed and a model is proposed implementing student development through the accommodation of diverse organizational elements and by an integrated…

  20. Student Development in Higher Education: A Constructivist Approach

    Science.gov (United States)

    Ibrahim, Rania; Sarirete, Akila

    Sustainable education requires a new approach to knowledge acquisition and learning. This approach is manifested in merging student experience inside and outside the classroom, which eventually results in shaping the 21 st century lifelong learner. This paper presents an innovative student development model based on the constructivist approach; showing the collaboration between student affairs and academics. Furthermore, it illustrates a unique experience implemented at Effat University for developing the student as a whole person. This is done to complement the student's academic experience with the necessary skills and abilities derived from Effat University mission that focuses on creating women leaders. The student finds herself in a journey of self development and growth throughout the course of her study until graduation. At the time of graduation, she is equipped with all what it takes to be a successful career woman and a leader of change in her society.

  1. Students' Development and Use of Models to Explain Electrostatic Interactions

    Science.gov (United States)

    Mayer, Kristin Elizabeth

    The National Research Council (2012) recently published A Framework for K-12 Science Education that describes a vision for science classrooms where students engage in three dimensions--scientific and engineering practices, crosscutting concepts, and disciplinary core ideas--to explain phenomena or observations they can make about the universe around them. This vision of science instruction is a significant shift from current classroom instruction. This dissertation provides detailed examples of how students developed and used models to build causal explanations of phenomena. I co-taught classes that focused on having students develop and revise models of electric fields and atomic structure using a curriculum that was designed to align with the three-dimensional vision of learning. I developed case studies of eleven students from these classes. I analyzed the students' responses and interviewed the students throughout the school year. By comparing and contrasting the analysis across the analysis of students' interviews, I identified four themes: 1) students could apply their ideas to explain novel and abstract phenomena; 2) students struggled to connect changes in their atomic models to evidence, but ended up with dynamic models of atomic structure that they could apply to explain phenomena; 3) students developed models of atomic structure that they applied to explain phenomena, but they did not use models of electric fields in this way; and 4) too much focus on details interfered with students' ability to apply their models to explain new phenomena. This dissertation highlights the importance of focusing on phenomena in classrooms that aim at aligning with three-dimensional learning. Students struggled to focus on specific content and apply their ideas to explain phenomena at the same time. In order to apply ideas to new context, students had to shift their focus from recalling ideas to applying the ideas they do have. A focus on phenomena allowed students to show

  2. Preparing Students for the Future: Making Career Development a Priority.

    Science.gov (United States)

    Hughey, Kenneth F.; Hughey, Judith K.

    1999-01-01

    Presents information relevant to school counseling about the implications of work changes. Outlines foundational guides for student success: improving decision making, learning about career paths, acquiring employability skills, and developing lifelong learning attitudes. Describes activities to facilitate career development. (SK)

  3. Development of fission Mo-99 production technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Ho; Choung, W. M.; Lee, K. I. and others

    2001-05-01

    This R and D project is planed to supply domestic demands of Mo-99 through fission route, and consequently this project will be expected to rise up utilization of HANARO and KAERI's capability for marketing extension into domestic and oversea radiopharmaceutical market. HEU and LEU target types are decided and designed for fission Mo-99 production in domestic. Experimental study of target fabrication technology was performed and developed processing equipments. And conceptual design of target loading/unloading in/from HANARO device are performed. Tracer test of Mo-99 separation and purification process was performed, test results reach to Mo-99 recovery yield above 80% and decontamination factor above 1600. Combined Mo-99 separation and purification process was decided for hot test scheduled from next year, and performance test was performed. Conceptual design for modification of existing hot cell for fission Mo-99 production facility was performed and will be used for detail design. Assumption for the comparison of LEU and HEU target in fission Mo-99 production process were suggested and compared of merits and demerits in view of fabrication technology and economy feasibility.

  4. Development of fission Mo-99 production technology

    International Nuclear Information System (INIS)

    Park, Jin Ho; Choung, W. M.; Lee, K. I. and others

    2001-05-01

    This R and D project is planed to supply domestic demands of Mo-99 through fission route, and consequently this project will be expected to rise up utilization of HANARO and KAERI's capability for marketing extension into domestic and oversea radiopharmaceutical market. HEU and LEU target types are decided and designed for fission Mo-99 production in domestic. Experimental study of target fabrication technology was performed and developed processing equipments. And conceptual design of target loading/unloading in/from HANARO device are performed. Tracer test of Mo-99 separation and purification process was performed, test results reach to Mo-99 recovery yield above 80% and decontamination factor above 1600. Combined Mo-99 separation and purification process was decided for hot test scheduled from next year, and performance test was performed. Conceptual design for modification of existing hot cell for fission Mo-99 production facility was performed and will be used for detail design. Assumption for the comparison of LEU and HEU target in fission Mo-99 production process were suggested and compared of merits and demerits in view of fabrication technology and economy feasibility

  5. Integrating Media Production By Students Into Climate Change Education: Within and Beyond the Classroom

    Science.gov (United States)

    Rooney-Varga, J. N.; Brisk, A. A.; Grogan, M.; Ledley, T. S.

    2012-12-01

    Through the Climate Education in an Age of Media (CAM) Project (http://cleanet.org/cced_media/), we have developed approaches to integrate media production by students into climate change education in ways that are engaging, empowering, and can be readily adopted in a wide range of instructional environments. These approaches can be used to overcome many of the challenges that climate change education presents and provide a means to evoke experiential, affective, and social learning pathways. Video production combines many key twenty-first century literacy skills, including content research, writing, an understanding of the power of images and sounds, the ability to use that power, and the ability to manipulate, transform, and distribute digital media. Through collaboration, reflection, and visual expression of concepts, video production facilitates a deeper understanding of material and, potentially, shifts in mental models about climate change. Equally importantly, it provides a means to bridge formal and informal learning by enabling students to educate those beyond the classroom. We have piloted our approach in two intensive summer programs (2011 and 2012) for high school students, during which students learned about climate change science content in lessons that were paired with the production of short media pieces including animations, public service announcements, person-on-the-street interviews, mock trailers, mock news programs, and music videos. Two high school teachers were embedded in the program during the second year, providing feedback and assessment of the feasibility, accessibility, and utility of the approach. The programs culminated with students presenting and discussing their work at public screening events. The media lessons and climate change science content examples used in these programs form the backbone of a toolkit and professional development workshops for middle and high school teachers, in which teachers learn how to incorporate

  6. Development of synthetic gasoline production process

    Energy Technology Data Exchange (ETDEWEB)

    Imai, T; Fujita, H; Yamada, K; Suzuki, T; Tsuchida, Y

    1986-01-01

    As oil deposits are limited, it is very important to develop techniques for manufacturing petroleum alternatives as substitute energy sources to brighten the outlook for the future. The Research Association for Petroleum Alternatives Development (RAPAD) in Japan is engaged in the research and development of production techniques for light hydrocarbon oils such as gasoline, kerosene, and light oil from synthesis gas (CO, H/sub 2/) obtained from the raw materials of natural gas, coal, etc. Regarding the MTG process of synthesizing gasoline via methanol from synthesis gas and the STG process of directly synthesizing gasoline from synthesis gas, Cosmo Oil Co., Ltd. and Mitsubishi Heavy Industries, Ltd., members of RAPAD, have sought jointly to develop catalysts and processes. As a result of this co-operation, the authors have recently succeeded in developing a new catalyst with a long life span capable of providing a high yield and high selectivity. Additionally, the authors are currently on the verge of putting into effect a unique two-step STG process of synthesizing high octane gasoline via dimethyl ether, referred to as the AMSTG process.

  7. Conceptualization about conservation, production and development

    International Nuclear Information System (INIS)

    Angel, Augusto

    1994-01-01

    The article tries the conceptualization, production and development, of the environmental sciences or environmentalism and ecology; they are made a series of reflections that it haven't just been defined still these sciences with clarity like a epistemological field in front of the other sciences, or in combination or in integration with them that doesn't have, unfortunately, for the way like it has been come developing the science western, many possibilities of theoretical approach, in fact for the sciences compartment. The author comments that this compartment was obligatory inside the development process begun by Europe and that it ends fundamentally in the capitalist development. That the positivism and the empiricism like expression forms have been indispensable to dominate the nature and to exploit it; so that there we needed specialized sciences that had the capacity the resources that it needed the development. The environmentalism and, before the environmentalism, the ecology is putting us in a quite complicated noise, and it is that more and more they are putting us before the pressure that in fact the natural resources are integrated to complex systems, and it is that the science is not organized to manage systems

  8. Photonics education development for electrical engineering students

    Science.gov (United States)

    Cao, Yang; Luo, Yuan; Liu, Yu; Hu, ZhangFang; Cai, Xuemei

    2017-08-01

    We describe the contents of an advanced undergraduate course on photonics at School of Electrical Engineering, Chongqing University of Posts and Telecommunications. The main goal of the course is to equip the student with the necessary theoretical and practical knowledge to participate in photonics-related industry and further graduate level study and research if they choose. The prerequisites include college-level physics and higher mathematics which a general engineering student has already had in his/her first and second year college study. Although applications of photonics are ubiquitous such as telecommunications, photonic computing, spectroscopy, military technology, and biophotonics etc. Telecommunication information system application is more emphasized in our course considering about the potential job chances for our students.

  9. DEVELOPING STUDENT SOCIALIZATION THROUGH MOTOR ACTIVITIES

    Directory of Open Access Journals (Sweden)

    Ioan Sabin SOPA

    2016-10-01

    Full Text Available : Starting from the assumption that motor activities are the perfect environment for socialization, communication and social integration of young people, this study aims to analyze the effectiveness of these activities in improving intergroup relations at the university level. In this research, the samples were composed of two groups, the experimental group (n = 25 with students from the Physical Education specialization and control group B (n = 25, composed of students from the Faculty of Sciences. The sociological survey applied on the two samples aimed to analyze the level of socialization, communication and social integration of students. The findings showed that the experimental group is more united, having a higher level of socialization and communication, compared to the control group B, proving once again the socializing effects of motor activities.

  10. Consequences of new product development speed : a meta-analysis

    NARCIS (Netherlands)

    Cankurtaran, P.; Langerak, F.; Griffin, A.

    2013-01-01

    Five meta-analyses previously have been published on the topic of new product development involving the concept of new product development speed. Three of these studies have investigated antecedents to new product development success, of which just one was new product development speed. The other

  11. Collaborative Computer Graphics Product Development between Academia and Government: A Dynamic Model

    Science.gov (United States)

    Fowler, Deborah R.; Kostis, Helen-Nicole

    2016-01-01

    Collaborations and partnerships between academia and government agencies are common, especially when it comes to research and development in the fields of science, engineering and technology. However, collaboration between a government agency and an art school is rather atypical. This paper presents the Collaborative Student Project, which aims to explore the following challenge: The ideation, development and realization of education and public outreach products for NASAs upcoming ICESat-2 mission in collaboration with art students.

  12. Development of high productivity pipeline girth welding

    International Nuclear Information System (INIS)

    Yapp, David; Liratzis, Theocharis

    2010-01-01

    The trend for increased oil and gas consumption implies a growth of long-distance pipeline installations. Welding is a critical factor in the installation of pipelines, both onshore and offshore, and the rate at which the pipeline can be laid is generally determined by the speed of welding. This has resulted in substantial developments in pipeline welding techniques. Arc welding is still the dominant process used in practice, and forge welding processes have had limited successful application to date, in spite of large investments in process development. Power beam processes have also been investigated in detail and the latest laser systems now show promise for practical application. In recent years the use of high strength steels has substantially reduced the cost of pipeline installation, with X70 and X80 being commonly used. This use of high strength pipeline produced by thermomechanical processing has also been researched. They must all meet three requirments, high productivity, satisfactory weld properties, and weld quality

  13. Development of a Medical Cyclotron Production Facility

    Science.gov (United States)

    Allen, Danny R.

    2003-08-01

    Development of a Cyclotron manufacturing facility begins with a business plan. Geographics, the size and activity of the medical community, the growth potential of the modality being served, and other business connections are all considered. This business used the customer base established by NuTech, Inc., an independent centralized nuclear pharmacy founded by Danny Allen. With two pharmacies in operation in Tyler and College Station and a customer base of 47 hospitals and clinics the existing delivery system and pharmacist staff is used for the cyclotron facility. We then added cyclotron products to contracts with these customers to guarantee a supply. We partnered with a company in the process of developing PET imaging centers. We then built an independent imaging center attached to the cyclotron facility to allow for the use of short-lived isotopes.

  14. Development of a Medical Cyclotron Production Facility

    International Nuclear Information System (INIS)

    Allen, Danny R.

    2003-01-01

    Development of a Cyclotron manufacturing facility begins with a business plan. Geographics, the size and activity of the medical community, the growth potential of the modality being served, and other business connections are all considered. This business used the customer base established by NuTech, Inc., an independent centralized nuclear pharmacy founded by Danny Allen. With two pharmacies in operation in Tyler and College Station and a customer base of 47 hospitals and clinics the existing delivery system and pharmacist staff is used for the cyclotron facility. We then added cyclotron products to contracts with these customers to guarantee a supply. We partnered with a company in the process of developing PET imaging centers. We then built an independent imaging center attached to the cyclotron facility to allow for the use of short-lived isotopes

  15. Strategic Alignment and New Product Development

    DEFF Research Database (Denmark)

    Acur, Nuran; Kandemir, Destan; Boer, Harry

    2012-01-01

    Strategic alignment is widely accepted as a prerequisite for a firm’s success, but insight into the role of alignment in, and its impact on, the new product evelopment (NPD) process and its performance is less well developed. Most publications on this topic either focus on one form of alignment...... of NPD performance indicators. Strategic planning and innovativeness appear to affect technological, market, and NPD-marketing alignment positively. Environmental munificence is negatively associated with NPD-marketing alignment, but has no effect on the two other forms of alignment. Technological change...... has a positive effect on technological alignment, a negative effect on NPD-marketing alignment, but no effect on market alignment. These findings suggest that internal capabilities are more likely to be associated with the development of strategic alignment than environmental factors are. Furthermore...

  16. Knowledge sharing in international product development teams

    DEFF Research Database (Denmark)

    Sonne, Anne-Mette; Harmsen, Hanne

    Many companies are facing an increasing need to compete on a global scale. But as companies move into multiple markets, the process of developing new products becomes increasingly complex. Coping successfully with the increased internationalization forces companies to excel at collaboration...... company are far from trivial and the problems associated with transfer will increase with geographical and cultural difference (Bresman et al., 1999). Especially tacit knowledge is difficult to transport across national boarders (Kogut & Zander, 1992) and not much research exists on how companies overcome...... development process is by using teams. Teams are considered one of the best tools for exchanging especially tacit knowledge, since this kind of knowledge is transferred best through personal interaction and face-to-face meetings (Madhavan & Grover, 1998; Nonaka, 1994). In accordance with this, more and more...

  17. Protein engineering for biofuel production: Recent development

    Directory of Open Access Journals (Sweden)

    Nisha Singh

    2016-09-01

    Full Text Available The unstable and unsure handiness of crude oil sources moreover the rising price of fuels have shifted international efforts to utilize renewable resources for the assembly of greener energy and a replacement which might additionally meet the high energy demand of the globe. Biofuels represent a sustainable, renewable, and also the solely predictable energy supply to fossil fuels. During the green production of Biofuels, several in vivo processes place confidence in the conversion of biomass to sugars by engineered enzymes, and the subsequent conversion of sugars to chemicals via designed proteins in microbial production hosts. Enzymes are indispensable within the effort to provide fuels in an ecologically friendly manner. They have the potential to catalyze reactions with high specificity and potency while not using dangerous chemicals. Nature provides an in depth assortment of enzymes, however usually these should be altered to perform desired functions in needed conditions. Presently available enzymes like cellulose are subject to tight induction and regulation systems and additionally suffer inhibition from numerous end products. Therefore, more impregnable and economical catalyst preparations ought to be developed for the enzymatic method to be more economical. Approaches like protein engineering, reconstitution of protein mixtures and bio prospecting for superior enzymes are gaining importance. Advances in enzyme engineering allow the planning and/or directed evolution of enzymes specifically tailored for such industrial applications. Recent years have seen the production of improved enzymes to help with the conversion of biomass into fuels. The assembly of the many of those fuels is feasible due to advances in protein engineering. This review discusses the distinctive challenges that protein engineering faces in the method of changing lignocellulose to biofuels and the way they're addressed by recent advances in this field.

  18. Food production - Present and future development

    International Nuclear Information System (INIS)

    Lamm, C.G.

    1974-01-01

    This year the joint FAO/IAEA Division of Atomic Energy in Food and Agriculture celebrates its 10th anniversary. The aim of these two United Nations organizations is to ensure that the technical services of both FAO and IAEA are fully co-ordinated and their programmes are designed to assist developing Member States to apply isotopes and radiation techniques to the solution of food and agricultural problems. More precisely, the medium-term objectives of the Joint Division are to exploit the potential of nuclear techniques in research and development for increasing and stabilizing agricultural production, improving food quality, protecting agricultural products from spoilage and losses and minimizing pollution of food and the agricultural environment. This account of what radioisotopes can do for man in the agricultural field is therefore to a great extent a review of the activities of the Joint Division and a prediction of its future fields of emphasis, especially in the light of the present long-range and world-wide food crisis. (author)

  19. A Framework for successful new product development

    Directory of Open Access Journals (Sweden)

    Nadia Bhuiyan

    2011-12-01

    Full Text Available Purpose: The purpose of this paper is to propose a framework of critical success factors, metrics, and tools and techniques for implementing metrics for each stage of the new product development (NPD process.Design/methodology/approach: To achieve this objective, a literature review was undertaken to investigate decades of studies on NPD success and how it can be achieved. These studies were scanned for common factors for firms that enjoyed success of new products on the market.Findings: The paper summarizes NPD success factors, suggests metrics that should be used to measure these factors, and proposes tools and techniques to make use of these metrics. This was done for each stage of the NPD process, and brought together in a framework that the authors propose should be followed for complex NPD projects.Research limitations/implications: Several different research directions could provide additional useful information both to firms finding critical success factors (CSF and measuring product development success as well as to academics performing research in this area. The main research opportunity exists in implementing or testing the proposed framework.Practical implications: The framework can be followed by managers of complex NPD projects to ensure success.Originality/value: While many studies have been conducted on critical success factors for NPD, these studies tend to be fragmented and focus on one or a few phases of the NPD process. To the authors’ knowledge, this is the first time a framework that synthesizes these studies into a single framework.

  20. Student Leadership Development: A Functional Framework

    Science.gov (United States)

    Hine, Gregory Stephen Colin

    2014-01-01

    This article presents a longitudinal, qualitative case study of a student leadership program in a Catholic secondary school in Perth, Western Australia. Data were collected over a period of three years through multiple methods, including one-on-one interviewing, focus group interviewing, document searches, field notes, and researcher reflective…

  1. Student Development and Experimental-Gestalt Therapy.

    Science.gov (United States)

    Witchel, Robert

    The rapid pace at which societal changes have occurred in our culture has presented a tremendous challenge to higher education. A major attempt to meet this challenge has been the Tomorrow's Higher Education (THE) Project. The goal of the THE Project is to reconceptualize student affaris work in a way that will provide a measure of creative input…

  2. Which Characteristics of Gifted Students should be Developed? Student, Teacher and Parent Opinions

    Directory of Open Access Journals (Sweden)

    M. Serdar Köksal

    2017-06-01

    Full Text Available The aim of this research was to investigate parent, student and teacher opinions about which characteristics of gifted students should be developed in cognitive, affective, psychomotor and social learning areas. The participants included 609 gifted students, 350 parents and 157 teachers from Science and Art Canters. Participants were surveyed using “The Which Characteristics of Gifted Students Should Be Developed”. The results of research revealed that students, parents and teachers agreed that social and affective skills should be improved. On the other hand, they held different opinions on the importance of music, art, dance, role-play, sport, domestic economy skills. This result indicates that these skills are thought by participants to be less important for gifted students’ development. In addition, teachers did not think technology so important for the development of gifted students, placing more emphasis on cognitive and affective domains.

  3. Development of eStudent iOS mobile application

    Directory of Open Access Journals (Sweden)

    Mladjan Antic

    2013-01-01

    Full Text Available Abstract— iOS is the Apple mobile operating system, for Apple mobile devices. Initially developed for iPhone, and later for iPod Touch, iPad, AppleTV. The Metropolitan University has a Web application titled eStudent, which enables students by Web to get information about their marks for all subjects, their financies, exam scheduling, professors and assistents, and send exam registration and feedback about teaching, etc. This paper explains the development of the mobile application eStudent on the iOS platform. This application enables students whenever they want, by using their iPhone mobile phone, to get access to the information from the eStudent Web application, and to present it on their iPhone User Interface (UI. This paper explains in details software requirements analysis, system architecture, system modelling, and UI of the eStudent iOS mobile application.

  4. Topics in Bioethics: A Development of Student Perspectives

    Directory of Open Access Journals (Sweden)

    Keith A. Johnson

    2014-10-01

    Full Text Available Exposing students to current biotechnological and medical issues is eye-opening for many students in a way that is not always achieved through lecture-based learning. Lecture or investigative teaching styles provide a tremendous knowledge base for the students, but sometimes these teaching styles do not allow the student to fully develop, especially personal attitudes to issues in bioethics. Through online videos, Hollywood movies, guided readings and classroom discussions, students in this course are informed of some bioethical topics, encouraged to learn about other topics, and use this gained knowledge to develop personal positions regarding the value and/or risk of the issues. This course has been well-received by previous students as a favorite in terms of both topics covered and style.

  5. MSWT-01, an alternative in combining Production Based Education (PBE) and student CSR program in Polman

    Science.gov (United States)

    Ananto, Gamawan; Setiawan, Albertus B.; Z, Darman M.

    2014-06-01

    MSWT-01, Mobile Surface Water Treatment, producing 1m3 per hour, is an alternative for providing clean water in flood disaster areas, and was developed at Bandung State Polytechnic for Manufacturing (Polman) as a part of institution research project. The combination of cartridge or membrane technology such as carbon block, MF, UF and filtration media is used for this machine, instead of coagulation-flocculation with chemical addition, due to emergency purposes related with its treatment processing time. The idea is that MSWT could be combined with Production Based Education (PBE) concept in Polman as a vocational education institution and students 'CSR', students social activities. With the number of implementation trials in real flood area condition, MSWT will be developed further based on the technical output result. The manufacturing process for improving or adding necessary features could be implemented as a student's project in PBE system. This might be an ideal combination alternative for such vocational institution that students get the product media for their PBE program and implement their work as a defined social activity. They will learn and experience related technical matters and more social interactions with the people and other disaster stakeholder as well.

  6. Potential development of bioethanol production in Vojvodina

    Energy Technology Data Exchange (ETDEWEB)

    Dodic, Sinisa N.; Popov, Stevan D.; Dodic, Jelena M.; Rankovic, Jovana A.; Zavargo, Zoltan Z. [Department of Biotechnology and Pharmaceutical Engineering, Faculty of Technology, University of Novi Sad, Bul. cara Lazara 1, Novi Sad 21000, Vojvodina (RS)

    2009-12-15

    The Autonomous Province of Vojvodina is an Autonomous Province in Serbia, containing about 27% of its total population according to the 2002 Census. Contribution of renewable energy sources in total energy consumption of Vojvodina contemporary amounts to less than 1%, apropos 280 GWh/year. By combining of methods of introduction of new and renewable sources, systematic application of methods for increasing of energetic efficacy, as well as of introduction of the new technologies, percentage of contribution of the non-conventional energy sources in Vojvodina could be increased to as much as 20%. This paper presents the potential of development of bioethanol production in Vojvodina. Production of bioethanol on small farms can be successfully applied for processing of only 30 kg of corn per day, with obtaining of crude ethanol in the so-called 'brandy ladle' and use of lygnocellulosic agricultural wastes as an energy source. In a case of construction of a larger number of such plants, the only possible solution is seen in the principle of construction of the so-called 'satellite plants', which will on small farm produce crude ethanol, with obtaining and consumption of stillage for animal feeding, and consumption of agricultural wastes as energetic fuels. If stillage is to be used as feed in wet feeding, it is estimated that, because of restrictions established by the magnitude of animal farm, the upper limit of capacity of such enterprises that process is at some 10-15 tons of corn per day, and production of 3000-3500 hL of absolute ethanol per day. In such a case, for animal feeding necessary is to have herd with 1300-1700 of milking cows or 5000-25,000 heads of sheep and/or pigs. Technological model of separate grain processing ad bioethanol production from dextrose hydrolysates of starch is interesting for countries possessing plants for bioethanol production from molasses and plants for cereals processing into starch and dextrose hydrolysates

  7. Human resource development for uranium production cycle

    International Nuclear Information System (INIS)

    Ganguly, C.

    2014-01-01

    Nuclear fission energy is a viable option for meeting the ever increasing demand for electricity and high quality process heat in a safe, secured and sustainable manner with minimum carbon foot print and degradation of the environment. The growth of nuclear power has shifted from North America and Europe to Asia, mostly in China and India. Bangladesh, Vietnam, Indonesia, Malaysia and the United Arab Emirates are also in the process of launching nuclear power program. Natural uranium is the basic raw material for U-235 and Pu-239, the fuels for all operating and upcoming nuclear power reactors. The present generation of nuclear power reactors are mostly light water cooled and moderated reactor (LWR) and to a limited extent pressurized heavy water reactor (PHWR). The LWRs and PHWRs use low enriched uranium (LEU with around 5% U-235) and natural uranium as fuel in the form of high density UO_2 pellets. The uranium production cycle starts with uranium exploration and is followed by mining and milling to produce uranium ore concentrate, commonly known as yellow cake, and ends with mine and mill reclamation and remediation. Natural uranium and its daughter products, radium and radon, are radioactive and health hazardous to varying degrees. Hence, radiological safety is of paramount importance to uranium production cycle and there is a need to review and share best practices in this area. Human Resource Development (HRD) is yet another challenge as most of the experts in this area have retired and have not been replaced by younger generation because of the continuing lull in the uranium market. Besides, uranium geology, exploration, mining and milling do not form a part of the undergraduate or post graduate curriculum in most countries. Hence, the Technical Co-operation activities of the IAEA are required to be augmented and more country specific and regional training and workshop should be conducted at different universities with the involvement of international experts

  8. The Development of Students' Writing Skills by Teaching Critical Thinking

    OpenAIRE

    久保田, 祐歌

    2011-01-01

    The purpose of this paper is to present some approaches to teaching critical thinking to college students for developing their Japanese academic writing skills. By examining the literature of critical thinking and writing, this paper shows the following. (1)How philosophy faculty can teach critical thinking skills to their own students the way they can improve their skills necessary for writing argumentative essays. (2)By what class and curriculum students' academic writing skills can be fost...

  9. Integrated durability process in product development

    International Nuclear Information System (INIS)

    Pompetzki, M.; Saadetian, H.

    2002-01-01

    This presentation describes the integrated durability process in product development. Each of the major components of the integrated process are described along with a number of examples of how integrated durability assessment has been used in the ground vehicle industry. The durability process starts with the acquisition of loading information, either physically through loads measurement or virtually through multibody dynamics. The loading information is then processed and characterized for further analysis. Durability assessment was historically test based and completed through field or laboratory evaluation. Today, it is common that both the test and CAE environments are used together in durability assessment. Test based durability assessment is used for final design sign-off but is also critically important for correlating CAE models, in order to investigate design alternatives. There is also a major initiative today to integrate the individual components into a process, by linking applications and providing a framework to communicate information as well as manage all the data involved in the entire process. Although a single process is presented, the details of the process can vary significantly for different products and applications. Recent applications that highlight different parts of the durability process are given. As well as an example of how integration of software tools between different disciplines (MBD, FE and fatigue) not only simplifies the process, but also significantly improves it. (author)

  10. Latest Developments of the Isprs Student Consortium

    Science.gov (United States)

    Detchev, I.; Kanjir, U.; Reyes, S. R.; Miyazaki, H.; Aktas, A. F.

    2016-06-01

    The International Society for Photogrammetry and Remote Sensing (ISPRS) Student Consortium (SC) is a network for young professionals studying or working within the fields of photogrammetry, remote sensing, Geographical Information Systems (GIS), and other related geo-spatial sciences. The main goal of the network is to provide means for information exchange for its young members and thus help promote and integrate youth into the ISPRS. Over the past four years the Student Consortium has successfully continued to fulfil its mission in both formal and informal ways. The formal means of communication of the SC are its website, newsletter, e-mail announcements and summer schools, while its informal ones are multiple social media outlets and various social activities during student related events. The newsletter is published every three to four months and provides both technical and experiential content relevant for the young people in the ISPRS. The SC has been in charge or at least has helped with organizing one or more summer schools every year. The organization's e-mail list has over 1,100 subscribers, its website hosts over 1,300 members from 100 countries across the entire globe, and its public Facebook group currently has over 4,500 joined visitors, who connect among one another and share information relevant for their professional careers. These numbers show that the Student Consortium has grown into a significant online-united community. The paper will present the organization's on-going and past activities for the last four years, its current priorities and a strategic plan and aspirations for the future four-year period.

  11. An exploration of role model influence on adult nursing students' professional development: A phenomenological research study.

    Science.gov (United States)

    Felstead, Ian S; Springett, Kate

    2016-02-01

    Patients' expectations of being cared for by a nurse who is caring, competent, and professional are particularly pertinent in current health and social care practice. The current drive for NHS values-based recruitment serves to strengthen this. How nursing students' development of professionalism is shaped is not fully known, though it is acknowledged that their practice experience strongly shapes behaviour. This study (in 2013-14) explored twelve adult nursing students' lived experiences of role modelling through an interpretive phenomenological analysis approach, aiming to understand the impact on their development as professional practitioners. Clinical nurses influenced student development consistently. Some students reported that their experiences allowed them to learn how not to behave in practice; a productive learning experience despite content. Students also felt senior staff influence on their development to be strong, citing 'leading by example.' The impact of patients on student professional development was also a key finding. Through analysing information gained, identifying and educating practice-based mentors who are ready, willing, and able to role model professional attributes appear crucial to developing professionalism in nursing students. Those involved in nurse education, whether service providers or universities, may wish to acknowledge the influence of clinical nurse behaviour observed by students both independent of and in direct relation to care delivery and the impact on student nurse professional development. A corollary relates to how students should be guided and briefed/debriefed to work with a staff to ensure their exposure to a variety of practice behaviours. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Digital development of products with NX9 for academical areas

    Science.gov (United States)

    Goanta, A. M.

    2015-11-01

    International competitiveness forced the manufacturing enterprises to look for new ways to accelerate the development of digital products through innovation, global alliances and strategic partnerships. In an environment of global research and development of distributed geographically, all members of the joint teams made up of companies and universities need to access updated and accurate information about products created by any of the type employed, student, teacher. Current design processes involve more complex products consisting of elements of design created by multiple teams, disciplines and suppliers using independent CAD systems. Even when using a 3D CAD mature technology, many companies fail to significantly reduce losses in the process, improve product quality or product type to ensure successful innovations to market arouse interest. These challenges require a radical rethinking of the business model, which belongs to the field of design, which must be based on digital development of products based on integrated files. Through this work, the author has proposed to provide both synthesis and transformations brought news of the integrated NX [1, 2, 3] from Siemens PLM Software 9, following a news results detailed documentary study, and personal results obtained by applying the same version, the digital and integrated development of a product type device test beams. Based on educational license received for NX 9 was made a detailed study of the innovations made by this release, and the application of some of them went to graphical modelling and getting all the documentation of a test device bearing beams. Also, were synthesized in terms of methodology, the steps to take to obtain graphical documentation. The results consist of: 3D models of all parts and assembly 3D model of the three-dimensional constraints of all component parts and not least respectively all drawings and assembly drawing. The most important consequence of the paper is the obtaining of

  13. Career Development and Counselling Needs of LGBTQ High School Students

    Science.gov (United States)

    Chen, Charles P.; Keats, Amanda

    2016-01-01

    There is a dearth of research concerning the career development and counselling issues that are relevant for high school students who identify as lesbian, gay, bisexual, transgender and queer (LGBTQ). As such, little is known to understand LGBTQ students when it comes to their career-related struggles and needs. This article attempts to examine…

  14. Graduate Counseling Students' Learning, Development, and Retention of Knowledge

    Science.gov (United States)

    Lambie, Glenn W.; Ieva, Kara P.; Mullen, Patrick R.

    2013-01-01

    The present study investigated 52 graduate counseling students' levels of ethical and legal knowledge (Lambie, Hagedorn, & Ieva, 2010) and social-cognitive development (Hy & Loevinger, 1996) at three points: (a) prior to a counseling ethics course, (b) at the completion of the course, and (c) four months later. Students' ethical and legal…

  15. Taiwanese University Students' Perspectives on Experiential Learning and Psychosocial Development

    Science.gov (United States)

    Lin, Yii-Nii; Lai, Pi-Hui; Chiu, Yi-Hsing Claire; Hsieh, Hui-Hsing; Chen, Yueh-Hua

    2016-01-01

    This study described the relations of experiential learning and psychosocial development of Taiwanese university students through the qualitative method of phenomenology. Thirty-six students, age ranged from 19 to 25 years, from three research-oriented universities in northern Taiwan were interviewed. Seven themes were delineated: (1) discovering…

  16. Internationalisation and the Development of Students' Intercultural Competence

    Science.gov (United States)

    Lantz-Deaton, Caprice

    2017-01-01

    Universities' internationalisation rhetoric suggests that students studying on internationally diverse campuses will automatically engage positively with one another and develop intercultural competence. This study examined the extent to which a cohort of first year UK and non-UK students studying on an internationally diverse campus developed…

  17. Development of the Spatial Ability Test for Middle School Students

    Science.gov (United States)

    Yildiz, Sevda Göktepe; Özdemir, Ahmet Sükrü

    2017-01-01

    The purpose of this study was to develop a test to determine spatial ability of middle school students. The participants were 704 middle school students (6th, 7th and 8th grade) who were studying at different schools from Istanbul. Item analysis, exploratory and confirmatory factor analysis, reliability analysis were used to analyse the data.…

  18. Korean Graduate Students' Perceptions of Guidance and Professional Development

    Science.gov (United States)

    Lee, Kent; Lee, Hikyoung

    2017-01-01

    Past studies have indicated shortcomings in the training of graduate students in the US, especially for practical career skills, teaching skills, and non-academic careers. Students thus find professional development and guidance lacking for the demands of the modern marketplace. This study extends this research to the unique situation of current…

  19. Student Organizations as Avenues for Leader Learning and Development.

    Science.gov (United States)

    Sessa, Valerie I; Alonso, Nicole; Farago, Pamela; Schettino, Gaynell; Tacchi, Kelcie; Bragger, Jennifer D

    2017-09-01

    This chapter describes theory and research demonstrating that the experiences students have within student organizations, and the people with whom they interact within those organizations, are powerful triggers for leader learning and development. © 2017 Wiley Periodicals, Inc., A Wiley Company.

  20. Metabolic Pathways Visualization Skills Development by Undergraduate Students

    Science.gov (United States)

    dos Santos, Vanessa J. S. V.; Galembeck, Eduardo

    2015-01-01

    We have developed a metabolic pathways visualization skill test (MPVST) to gain greater insight into our students' abilities to comprehend the visual information presented in metabolic pathways diagrams. The test is able to discriminate students' visualization ability with respect to six specific visualization skills that we identified as key to…

  1. Developing and Implementing the Qatar Student Assessment System. Research Brief

    Science.gov (United States)

    Gonzalez, Gabriella; Le, Vi-Nhuan; Broer, Markus; Mariano, Louis T.; Froemel, J. Enrique; Goldman, Charles A.; DaVanzo, Julie

    2009-01-01

    This research brief summarizes the development of a standards-based student assessment system in Qatar, lessons for policymakers in Qatar and elsewhere, and challenges in aligning the assessment with future changes in the curriculum standards. Analysis of Qatar's standards-based student assessment system, the first in the region, offers several…

  2. Teacher Assertiveness in the Development of Students' Social Competence

    Science.gov (United States)

    Villena Martínez, M. D.; Justicia, F. Justicia; Fernández de Haro, E.

    2016-01-01

    Introduction: Social competence in school students has been studied extensively in terms of their being socially competent or not. However, there has been little analysis of how teachers contribute to the development of these skills. This research assesses the influence of teachers' assertiveness on the social competence of their students and on…

  3. What Do Final Year Engineering Students Know about Sustainable Development?

    Science.gov (United States)

    Nicolaou, I.; Conlon, E.

    2012-01-01

    This paper presents data from a project that aims to determine the level of knowledge and understanding of engineering students about sustainable development (SD). The data derive from a survey completed by final year engineering students in three Irish Higher Education Institutions. This paper is part of a larger study that examines the…

  4. Motivating Students and Lecturers for Education in Sustainable Development

    Science.gov (United States)

    Mulder, Karel F.; Ferrer, Didac; Segalas Coral, Jordi; Kordas, Olga; Nikiforovich, Eugene; Pereverza, Kateryna

    2015-01-01

    Purpose: This paper aims at identifying factors that could contribute to the motivation of students in sustainable development (SD) education. The underlying idea of the paper is that SD education is not always as attractive among students and lecturers as many would like it to be. Design/methodology/approach: The paper briefly reviews literature…

  5. How Students Learn: Information Processing, Intellectual Development and Confrontation

    Science.gov (United States)

    Entwistle, Noel

    1975-01-01

    A model derived from information processing theory is described, which helps to explain the complex verbal learning of students and suggests implications for lecturing techniques. Other factors affecting learning, which are not covered by the model, are discussed in relationship to it: student's intellectual development and effects of individual…

  6. The Impact of Diversity Courses on College Students' Moral Development

    Science.gov (United States)

    Parker, Eugene T., III; Barnhardt, Cassie L.; Pascarella, Ernest T.; McCowin, Jarvis A.

    2016-01-01

    We utilized data from a multi-institutional longitudinal study to investigate the association between diversity-related coursework and moral development among students over 4 years of college. Our findings parallel the prior research, which support the positive effects of diversity on college students, by offering new evidence that diversity…

  7. Developing Students' Cultural Awareness in College English Teaching

    Institute of Scientific and Technical Information of China (English)

    刘利

    2009-01-01

    The importance of cultural awareness in college English teaching has been noted by the author because it can help the students bridge the cultural differences between mother tongue and target language. Cultural essence of China and English-speaking countries is analyzed and some methods of developing college students' cultural awareness are introduced in this paper.

  8. Unlocking Student Talent: The New Science of Developing Expertise

    Science.gov (United States)

    Fogarty, Robin J.; Kerns, Gene M.; Pete, Brian M.

    2017-01-01

    How do we truly help "all" students achieve their fullest potential? What are the roles of motivation, deliberate practice, and coaching in developing talent and abilities in students? This hands-on guide examines each of these elements in detail providing definitions, relevant research, discussions, examples, and practical steps to take…

  9. Academic and Career Development: Rethinking Advising for Asian American Students

    Science.gov (United States)

    Kodama, Corinne M.; Huynh, Jill

    2017-01-01

    Academic and career development for Asian American students is complicated by cultural influences, interdependence with family, and racial stereotyping. This chapter highlights research, theory, and practice to help educators rethink traditional advising approaches to more appropriately work with Asian American students as they navigate their…

  10. Emotional Intelligence and Cognitive Moral Development in Undergraduate Business Students

    Science.gov (United States)

    McBride, Elizabeth A.

    2010-01-01

    This study examines relationships between emotional intelligence (EI) and cognitive moral development (CMD) in undergraduate business students. The ability model of emotional intelligence was used in this study, which evaluated possible relationships between EI and CMD in a sample of 82 undergraduate business students. The sample population was…

  11. Culturing Reality: How Organic Chemistry Graduate Students Develop into Practitioners

    Science.gov (United States)

    Bhattacharyya, Gautam; Bodner, George M.

    2014-01-01

    Although one of the presumed aims of graduate training programs is to help students develop into practitioners of their chosen fields, very little is known about how this transition occurs. In the course of studying how graduate students learn to solve organic synthesis problems, we were able to identify some of the key factors in the epistemic…

  12. Bereavement: Applying Erikson's Theory of Psychosocial Development to College Students.

    Science.gov (United States)

    Floerchinger, Debra S.

    One of the developmental challenges that a college student may have to face is the death of a significant other, friend, spouse, relative, child, or parent. This article reviews the literature on the potential effects of bereavement on a college student with respect to Erik Erikson's stage six of psychosocial development (intimacy versus…

  13. Developing Creative Behavior in Elementary School Students with Robotics

    Science.gov (United States)

    Nemiro, Jill; Larriva, Cesar; Jawaharlal, Mariappan

    2017-01-01

    The School Robotics Initiative (SRI), a problem-based robotics program for elementary school students, was developed with the objective of reaching students early on to instill an interest in Science, Technology, Engineering, and Math disciplines. The purpose of this exploratory, observational study was to examine how the SRI fosters student…

  14. Examining Elementary Students' Development of Oral and Written Argumentation Practices Through Argument-Based Inquiry

    Science.gov (United States)

    Chen, Ying-Chih; Hand, Brian; Park, Soonhye

    2016-05-01

    Argumentation, and the production of scientific arguments are critical elements of inquiry that are necessary for helping students become scientifically literate through engaging them in constructing and critiquing ideas. This case study employed a mixed methods research design to examine the development in 5th grade students' practices of oral and written argumentation from one unit to another over 16 weeks utilizing the science writing heuristic approach. Data sources included five rounds of whole-class discussion focused on group presentations of arguments that occurred over eleven class periods; students' group writings; interviews with six target students and the teacher; and the researcher's field notes. The results revealed five salient trends in students' development of oral and written argumentative practices over time: (1) Students came to use more critique components as they participated in more rounds of whole-class discussion focused on group presentations of arguments; (2) by challenging each other's arguments, students came to focus on the coherence of the argument and the quality of evidence; (3) students came to use evidence to defend, support, and reject arguments; (4) the quality of students' writing continuously improved over time; and (5) students connected oral argument skills to written argument skills as they had opportunities to revise their writing after debating and developed awareness of the usefulness of critique from peers. Given the development in oral argumentative practices and the quality of written arguments over time, this study indicates that students' development of oral and written argumentative practices is positively related to each other. This study suggests that argumentative practices should be framed through both a social and epistemic understanding of argument-utilizing talk and writing as vehicles to create norms of these complex practices.

  15. Engaging nurse aide students to develop a survey to improve enrollment and retention in college.

    Science.gov (United States)

    Boyd, Jamie Kamailani; Hernandez, Jesika Y; Braun, Kathryn L

    2011-01-01

    Students from lower socioeconomic status (SES) backgrounds have historically experienced high rates of college dropout. Surveys often are used to assess supports and barriers (SB) to college enrollment and completion, and findings drive the design of interventions to improve student recruitment and retention. However, standard surveys may not include questions that solicit the breadth of issues facing low-income minority individuals. We used community-based participatory research (CBPR) principles to develop an SB survey to better reflect the concerns of rural, first-generation college students in Hawai'i. An advisory panel (AP) of students and community partners guided the work. The literature informed the first draft of the SB survey. Then we worked with students who had successfully completed a vocational Nurse Aide (NA) Training Program (NATP) course to refine four versions of the SB survey through multiple cycles of online survey review and focus groups. The final product included questions in new areas and differently phrased questions in standard areas (e.g., transportation, dependent care, housing, financial aid) to better capture reasons for students dropping out. The survey has proven useful as a student assessment tool, and findings are being used by instructors, counselors, and community partners to add resources and modify programs to increase student success in community college. Findings confirm the usefulness of engaging target partners in tool development. An enhanced understanding of SB of students from underrepresented groups will help to improve college recruitment and retention interventions.

  16. Hiring, Developing, and Organizing Individual Employees for New Product Development versus Product-related Service Innovation

    DEFF Research Database (Denmark)

    Knudsen, Mette Præst; Schleimer, Stephanie

    should be hired. For the latter case, these employees’ individual careers must be developed internally once hired. The paper therefore carries important implication for the innovation management literature and related human resource practices at different organizational levels.......This study examines how manufacturing firms should organize their human resources by maximizing the value of individual employees for different forms of innovations. In particular, it examines the hiring, developing, and structural organization of human resources for optimizing different innovation...... the value of human resource hiring and developing practices for new product development success; organizations will find it more beneficial to invest predominantly in employees with the highest possible educational level, whilst for product-related service innovations; employees with more general skills...

  17. Medical students' professional identity development in an early nursing attachment.

    Science.gov (United States)

    Helmich, Esther; Derksen, Els; Prevoo, Mathieu; Laan, Roland; Bolhuis, Sanneke; Koopmans, Raymond

    2010-07-01

    The importance of early clinical experience for medical training is well documented. However, to our knowledge there are no studies that assess the influence of very early nursing attachments on the professional development and identity construction of medical students. Working as an assistant nurse while training to be a doctor may offer valuable learning experiences, but may also present the student with difficulties with respect to identity and identification issues. The aim of the present study was to describe first-year medical students' perceptions of nurses, doctors and their own future roles as doctors before and after a nursing attachment. A questionnaire containing open questions concerning students' perceptions of nurses, doctors and their own future roles as doctors was administered to all Year 1 medical students (n=347) before and directly after a 4-week nursing attachment in hospitals and nursing homes. We carried out two confirmatory focus group interviews. We analysed the data using qualitative and quantitative content analyses. The questionnaire was completed by 316 students (response rate 91%). Before starting the attachment students regarded nurses as empathic, communicative and responsible. After the attachment students reported nurses had more competencies and responsibilities than they had expected. Students' views of doctors were ambivalent. Before and after the attachment, doctors were seen as interested and reliable, but also as arrogant, detached and insensible. However, students maintained positive views of their own future roles as doctors. Students' perceptions were influenced by age, gender and place of attachment. An early nursing attachment engenders more respect for the nursing profession. The ambivalent view of doctors needs to be explored further in relation to students' professional development. It would seem relevant to attune supervision to the age and gender differences revealed in this study.

  18. Examining Thai high school students' developing STEM projects

    Science.gov (United States)

    Teenoi, Kultida; Siripun, Kulpatsorn; Yuenyong, Chokchai

    2018-01-01

    Like others, Thailand education strongly focused on STEM education. This paper aimed to examine existing Thai high school students' integrated knowledge about science, technology, engineering, and mathematics (STEM) in their developing science project. The participants included 49 high school students were studying the subject of individual study (IS) in Khon Kaen wittayayon school, Khon Kaen, Thailand. The IS was provided to gradually enhance students to know how to do science project starting from getting start to do science projects, They enrolled to study the individual study of science project for three year in roll. Methodology was qualitative research. Views of students' integrated knowledge about STEM were interpreted through participant observation, interview, and students' science projects. The first author as participant observation has taught this group of students for 3 years. It found that 16 science projects were developed. Views of students' integrated knowledge about STEM could be categorized into three categories. These included (1) completely indicated integration of knowledge about science, technology, engineering, and mathematics, (2) partial indicated integration of knowledge about science, technology, engineering, and mathematics, and (3) no integration. The findings revealed that majority of science projects could be categorized as completely indicated integration of knowledge about science, technology, engineering, and mathematics. The paper suggested some ideas of enhancing students to applying STEM for developing science projects.

  19. Student perception and conceptual development as represented by student mental models of atomic structure

    Science.gov (United States)

    Park, Eun Jung

    The nature of matter based upon atomic theory is a principal concept in science; hence, how to teach and how to learn about atoms is an important subject for science education. To this end, this study explored student perceptions of atomic structure and how students learn about this concept by analyzing student mental models of atomic structure. Changes in student mental models serve as a valuable resource for comprehending student conceptual development. Data was collected from students who were taking the introductory chemistry course. Responses to course examinations, pre- and post-questionnaires, and pre- and post-interviews were used to analyze student mental models of atomic structure. First, this study reveals that conceptual development can be achieved, either by elevating mental models toward higher levels of understanding or by developing a single mental model. This study reinforces the importance of higher-order thinking skills to enable students to relate concepts in order to construct a target model of atomic structure. Second, Bohr's orbital structure seems to have had a strong influence on student perceptions of atomic structure. With regard to this finding, this study suggests that it is instructionally important to teach the concept of "orbitals" related to "quantum theory." Third, there were relatively few students who had developed understanding at the level of the target model, which required student understanding of the basic ideas of quantum theory. This study suggests that the understanding of atomic structure based on the idea of quantum theory is both important and difficult. Fourth, this study included different student assessments comprised of course examinations, questionnaires, and interviews. Each assessment can be used to gather information to map out student mental models. Fifth, in the comparison of the pre- and post-interview responses, this study showed that high achieving students moved toward more improved models or to advanced

  20. Development of biology student worksheets to facilitate science process skills of student

    Science.gov (United States)

    Rahayu, Y. S.; Pratiwi, R.; Indana, S.

    2018-01-01

    This research aims to describe development of Biology student worksheets to facilitate science process skills of student, at the same time to facilitate thinking skills of students in senior high school are equipped with Assesment Sheets. The worksheets development refers to cycle which includes phase analysis (analysis), planning (planning), design (design), development (development), implementation (implementation), evaluation and revision (evaluation and revision). Phase evaluation and revision is an ongoing activity conducted in each phase of the development cycle. That is, after the evaluation of the results of these activities and make revisions at any phase, then continue to the next phase. Based on the test results for grade X, XI, and XII in St. Agnes Surabaya high school, obtained some important findings. The findings are as follows. (1) Developed biology student worksheets could be used to facilitate thinking ability of students in particular skills integrated process that includes components to formulate the problem, formulate hypotheses, determine the study variables, formulate an operational definition of variables, determine the steps in the research, planning data tables, organizing Data in the form of tables/charts, drawing conclusions, (2) Developed biology student worksheets could also facilitate the development of social interaction of students such as working together, listening/respect the opinions of others, assembling equipment and materials, discuss and share information and facilitate the upgrading of skills hands-on student activity. (3) Developed biology worksheets basically could be implemented with the guidance of the teacher step by step, especially for students who have never used a similar worksheet. Guidance at the beginning of this need, especially for worksheets that require special skills or understanding of specific concepts as a prerequisite, such as using a microscope, determine the heart rate, understand the mechanism of

  1. Using Students' Design Tasks to Develop Scientific Abilities

    Science.gov (United States)

    Zou, Xueli

    2007-11-01

    To help students develop the scientific abilities desired in the 21st century workplace, four different types of student design tasks—observation, verification, application, and investigation experiments—have been developed and implemented in our calculus-based introductory courses. Students working in small groups are engaged in designing and conducting their own experiments to observe some physical phenomena, test a physical principle, build a real-life device, solve a complex problem, or conduct an open-inquiry investigation. A preliminary study has shown that, probed by a performance-based task, the identified scientific abilities are more explicitly demonstrated by design-lab students than non-design lab students. In this paper, detailed examples of the design tasks and assessment results will be reported.

  2. Effectiveness of creative and productive instructional method towards students' learning achievement in steel structure course

    Science.gov (United States)

    Sugiyanto, Pribadi, Supriyanto, Bambang

    2017-09-01

    The purpose of this study was to investigate the effectiveness of Creative & Productive instructional method compared with conventional method. This research was a quasi-experimental study involving all Civil Engineering students at Universitas Negeri Malang who were taking a course of Steel Structure. The students were randomly assigned to two different treatment groups, 30 students in experimental group and 37 students in the control group. It was assumed that these groups were equal in all relevant aspects; they differed only in the treatment administered. We used the t-test to test the hypothesis. The results of this research suggest that: (l) the use of Creative & Productive instructional method can significantly improve students' learning achievement, (2) the use of Creative & Productive instructional method can significantly improve students' retention, (3) students' motivation has a significant effect on their learning achievement, and (4) students' motivation has a significant effect on their retention.

  3. Customer empowerment in new product development

    NARCIS (Netherlands)

    C. Fuchs (Christoph); M. Schreier (Martin)

    2012-01-01

    textabstractCompanies have traditionally taken responsibility for deciding what products and product innovations are offered to customers. However, a growing number of companies are turning this relationship on its head by asking customers not only for help in creating new products, but also in

  4. Developing a Telecommunications Curriculum for Students with Physical Disabilities.

    Science.gov (United States)

    Gandell, Terry S.; Laufer, Dorothy

    1993-01-01

    A telecommunications curriculum was developed for students (ages 15-21) with physical disabilities. Curriculum content included an internal mailbox program (Mailbox), interactive communication system (Blisscom), bulletin board system (Arctel), and a mainframe system (Compuserv). (JDD)

  5. Developing Export Management Competencies and Skills among Undergraduate Business Students.

    Science.gov (United States)

    Scharf, Fred; Bell, Jim

    2002-01-01

    Responses of 25 Northern Ireland business students who undertook client-sponsored projects in local businesses reported increased proficiency in conducting research, improved competence in export management, development of soft skills, and better ability to apply theory to practice. (SK)

  6. From Student Associations to CEUNE: The Development of Student Representation in Spain

    Science.gov (United States)

    Parejo, José Luis; Lorente, Javier

    2012-01-01

    The forms of students' political participation in the administration of higher education in Spain have evolved throughout history. Spain has developed from a period characterised by the corporatist model of Sindicato Espanõl Universitario--as a single syndicate of students controlled by the Franco Regime--towards the emergence of a student…

  7. The Empowering Role of Profession-Based Student Organizations in Developing Student Leadership Capacity.

    Science.gov (United States)

    Lebrón, Mariana J; Stanley, Cheryl L; Kim, Ariana J; Thomas, Kieara H

    2017-09-01

    After recreation and intramural groups, students participate in profession-based organizations more frequently than any other. This chapter explores how these groups can leverage their unique context to accelerate student leadership development and profession-related leadership competencies. © 2017 Wiley Periodicals, Inc., A Wiley Company.

  8. Development of a Student-Centered Instrument to Assess Middle School Students' Conceptual Understanding of Sound

    Science.gov (United States)

    Eshach, Haim

    2014-01-01

    This article describes the development and field test of the Sound Concept Inventory Instrument (SCII), designed to measure middle school students' concepts of sound. The instrument was designed based on known students' difficulties in understanding sound and the history of science related to sound and focuses on two main aspects of sound: sound…

  9. Teachers development and children's role as students

    DEFF Research Database (Denmark)

    Grumløse, Sine Penthin; Hedegaard Sørensen, Lotte

    This abstract reports from a research project on differentiated teaching and the professional development of teaching in diverse Classrooms.......This abstract reports from a research project on differentiated teaching and the professional development of teaching in diverse Classrooms....

  10. Student involvement as a vehicle for empowerment: a case study of the student platform for engineering education development

    KAUST Repository

    Delaine, David A.; Seif-Naraghi, Sonya B.; Al-Haque, Shahed; Wojewoda, Nicolò ; Meninato, Yvonne; DeBoer, Jennifer

    2010-01-01

    This paper examines the mission, structure and outputs of one organisation, the Student Platform for Engineering Education Development (SPEED), as a case study for how student-led organisations can use student involvement to promote and sustain

  11. Development of a Career Resilience Scale for University Students

    OpenAIRE

    児玉, 真樹子

    2017-01-01

    The purpose of this study was to develop a career resilience scale for university students. The data of 114 university students was collected. Career resilience, career decision making anxiety, and the degree of career development were measured. The result of a confirmatory factor analysis indicated a five-factor structure of career resilience with a high Cronbach’s alpha: ability to cope with problems and changes; social skills; interest in novelty; optimism about the future; and willingness...

  12. Conditions and strategies for integrating ergonomics into product development

    DEFF Research Database (Denmark)

    Broberg, Ole

    1996-01-01

    Ergonomics considerations at the stage of product development in industry is a major strategy for prevention of work-related injuries and illnesses among employees at the time of manufacture of new products. This study elucidates some important conditions and possibilities for integrating...... such considerations during the product development process. Special attention is paid to the role of design and production engineers. Based on different understandings of the product development process four approaches to integration of ergonomics are outlined....

  13. ORGANIZATIONAL-PEDAGOGICAL CONDITIONS OF DEVELOPMENT OF VALUE ORIENTATION OF STUDENTS INTO THE WORKING PROFESSION

    Directory of Open Access Journals (Sweden)

    Nadezhda Evgenievna Skripova

    2017-03-01

    Practical implications. It is shown that the technology of development of value orientation of students into the working profession has the property of productivity, flexibility and repeatability, can be used in mass practice of educational institutions, primarily in the subjects of the Russian Federation with a primary industrial focus.

  14. Environmentally-friendly product development: methods and tools

    National Research Council Canada - National Science Library

    Abele, Eberhard; Anderl, R; Birkhofer, Herbert

    2005-01-01

    ... to assess a product's environmental effects. Fig. 1. Vision of Environment as a key target for product development vvi Preface Product related environmental issues are getting more and more political and public awareness. Development of environmentally friendly products has become an action item for both, politics and industry (UNFCCC 1997). Energy...

  15. Developing critical thinking, creativity and innovation skills of undergraduate students

    Science.gov (United States)

    Shoop, Barry L.

    2014-07-01

    A desirable goal of engineering education is to teach students how to be creative and innovative. However, the speed of technological innovation and the continual expansion of disciplinary knowledge leave little time in the curriculum for students to formally study innovation. At West Point we have developed a novel upper-division undergraduate course that develops the critical thinking, creativity and innovation of undergraduate science and engineering students. This course is structured as a deliberate interactive engagement between students and faculty that employs the Socratic method to develop an understanding of disruptive and innovative technologies and a historical context of how social, cultural, and religious factors impact the acceptance or rejection of technological innovation. The course begins by developing the background understanding of what disruptive technology is and a historical context about successes and failures of social, cultural, and religious acceptance of technological innovation. To develop this framework, students read The Innovator's Dilemma by Clayton M. Christensen, The Structure of Scientific Revolutions by Thomas S. Kuhn, The Discoverers by Daniel J. Boorstin, and The Two Cultures by C.P. Snow. For each class meeting, students survey current scientific and technical literature and come prepared to discuss current events related to technological innovation. Each student researches potential disruptive technologies and prepares a compelling argument of why the specific technologies are disruptive so they can defend their choice and rationale. During course meetings students discuss the readings and specific technologies found during their independent research. As part of this research, each student has the opportunity to interview forward thinking technology leaders in their respective fields of interest. In this paper we will describe the course and highlight the results from teaching this course over the past five years.

  16. Physics Identity Development: A Snapshot of the Stages of Development of Upper-Level Physics Students

    Science.gov (United States)

    Irving, Paul W.; Sayre, Eleanor C.

    2013-01-01

    As part of a longitudinal study into identity development in upper-level physics students a phenomenographic research method is employed to assess the stages of identity development of a group of upper-level students. Three categories of description were discovered which indicate the three different stages of identity development for this group…

  17. EVALUATION OF PRODUCT DEVELOPMENT PROCESS USING EMVS

    Directory of Open Access Journals (Sweden)

    Iara Tonissi Moroni Cutovoi

    2014-12-01

    Full Text Available This paper evaluates a PDP model application in an auto parts company, leader in its segment. From the application of lean thinking in the supply chain and the EMVS performance analysis methodology for PDP, a check list is created to avoid waste in project management. In this paper, we show that EMVS can be positively impacted through active management of knowledge within a project. This paper suggests that the value-enabling portion of a project manager's role requires aligning knowledge across these three key domains regarding PDP Gates (Phases at company manufacturers of auto parts, Lean Thinking and Value Stream, and methodology for managing projects through performance-term rates and costs. The results show that the methodology has positive aspects, but its implementation takes time and has repercussions throughout the supply chain. Further this research try to explain the types of wastes and view of new products' development is enhanced and associates a manufacturing strategy focus on EMVS performance analysis and lean thinking, PDP and value stream mapping  showing the important of contribution this tools at reduction of waste.

  18. Career Development Skills, Outcomes, and Hope among College Students

    Science.gov (United States)

    Sung, Yoonhee; Turner, Sherri L.; Kaewchinda, Marid

    2013-01-01

    The purpose of this study was twofold. First, the utility of the Integrative Contextual Model of Career Development (ICM) to describe the career development behavior of college students was examined. Second, relationships among educational and career development skills (career exploration, person-environment fit, goal setting,…

  19. Development of Handcraft Exercise Courses that Bring Out Student's Creativity

    Science.gov (United States)

    Senda, Shinkoh; Yamamoto, Koji; Fukumori, Tutom; Matsuura, Hideo; Sato, Kazuo

    We have developed a new type of handcraft exercise program that aims to stimulate student's creativity on the way of design and fabrication of the subject machines. Conventional handicraft exercise program used to aim at letting students learn procedures of machining operation in accordance with a designated manual. Students having experienced our conventional exercise did not fully satisfied at those programs because of the lack in a room for their idea and creativity. Authors, a group of both technical and academic staffs, have developed and started the new type of program since 2003 at the Creation Plaza in Nagoya University. Developed program is classified into grades according to the difference in technical contents required for students.

  20. A review of teaching skills development programmes for medical students.

    Science.gov (United States)

    Marton, Gregory E; McCullough, Brendan; Ramnanan, Christopher J

    2015-02-01

    The CanMEDS role of Scholar requires that medical trainees develop their skills as medical educators. The development of teaching skills in undergraduate medical students is therefore desirable, especially in view of the teaching obligations in residency programmes. The goal of this review was to identify the characteristics and outcomes of programmes designed to develop the teaching skills of undergraduate medical students. The authors searched medical literature databases using combinations of the search terms 'medical student', 'teacher', 'teaching skills', 'peer teaching', 'near-peer teaching' and 'student as teacher'. Twenty papers fit the predetermined search criteria, which included original characterisations of specific programmes involving undergraduate medical students. Three types of initiative were identified in the reviewed articles: peer teaching programmes; teaching workshops, and community outreach programmes. The majority of study participants were students in Years 3 and 4. Subjective self-evaluation by participants using Likert scale-based surveys was by far the most commonly used method of measuring project outcomes. Objective, quantitative teaching-related outcomes were rarely noted in the reports reviewed. Self-perceived improvements in teaching skills were noted by participants in most of the reports. Other perceived benefits included increases in organisational skills, knowledge and confidence in giving feedback. Although several types of programmes have been shown to subjectively improve the teaching skills of undergraduate medical students, characterisation of the objective outcomes of these initiatives is lacking and requires further study. © 2015 John Wiley & Sons Ltd.

  1. Connecting Research to Teaching: The "MOST" Productive Student Mathematical Thinking

    Science.gov (United States)

    Stockero, Shari L.; Peterson, Blake E.; Leatham, Keith R.; Van Zoest, Laura R.

    2014-01-01

    Instruction that meaningfully incorporates students' mathematical thinking is widely valued within the mathematics education community (NCTM 2000; Sherin, Louis, and Mendez 2000; Stein et al. 2008). Although being responsive to student thinking is important, not all student thinking has the same potential to support mathematical learning.…

  2. Promotional Product Marketing, College Students, and Social Identity

    Science.gov (United States)

    Workman, Jane E.; Freeburg, Beth Winfrey

    2008-01-01

    This study describes the type and nature of promotional items distributed on university campuses to students; college students typically are in a stage of life characterized by identity exploration. Among 241 students, 90% received at least one promotional item (e.g.,T-shirts, pens/pencils, magnets, calendars, water bottles); 58% received at least…

  3. Evaluation of the Cross-Cultural Traits Influence on the Behavior of Russian and Chinese Students on the Higher Education Products Market

    Science.gov (United States)

    Romanova, Irina M.; Noskova, Elena V.; Trotsenko, Anastasiya N.

    2016-01-01

    Development of academic mobility of students from different countries requires evaluating the influence of their cultural traits on the behavior on the educational products market. The subject of present study is the development of methodic approach towards evaluating the cross-cultural traits influence on students' behavior on the higher…

  4. On the Development of College Student Information Management System

    Directory of Open Access Journals (Sweden)

    Jin Anjiang

    2015-01-01

    Full Text Available currently there exist severe fragmentation, different development standards, lack of sufficient support and other problems in the development of college student information management system. Therefore accelerating the development of student information management system is of necessity to improve universities’ management and administration efficiency. From the perspective of customers’ demands, the system should be designed and developed on the basis of Web Service by adopting B/S structure and SQL Server technology so as to coordinate applicability, security, compatibility, stability, maintainability and other non-functional demands.

  5. Developing students' qualitative muscles in an introductory methods course.

    Science.gov (United States)

    SmithBattle, Lee

    2014-08-30

    The exponential growth of qualitative research (QR) has coincided with methodological innovations, the proliferation of qualitative textbooks and journals, and the greater availability of qualitative methods courses. In spite of these advances, the pedagogy for teaching qualitative methods has received little attention. This paper provides a philosophical foundation for teaching QR with active learning strategies and shows how active learning is fully integrated into a one-semester course. The course initiates students into qualitative dispositions and skills as students develop study aims and procedures; enter the field to gather data; analyze the full set of student-generated data; and write results in a final report. Conducting a study in one semester is challenging but has proven feasible and disabuses students of the view that QR is simple, unscientific, or non-rigorous. Student reflections on course assignments are integrated into the paper. The strengths and limitations of this pedagogical approach are also described.

  6. Modelling architectures in multi-product oriented technology development

    DEFF Research Database (Denmark)

    Guðlaugsson, Tómas Vignir

    are not completely defined. Yet, decisions need to be made during technology development on the capabilities to be provided through the development to fulfil future application requirements,provide a foundation for future products, and development of a production system capable of producing future products...

  7. Managing R&D and New Product Development

    NARCIS (Netherlands)

    von Zedtwitz, Maximilian; Friesike, Sascha; Gassmann, Oliver; Dodgson, Mark; Gann, David M.; Phillips, Nelson

    2014-01-01

    This article examines the importance of R&D and new product development and explores their management. It describes three central aspects of managing R&D and new product development in firms: the product development funnel, R&D portfolio management, and R&D organization. Concepts such as the ‘fuzzy

  8. A Cross-Country Study on Research Students' Perceptions of the Role of Supervision and Cultural Knowledge in Thesis Development

    Science.gov (United States)

    McGinty, Suzanne Claire; Koo, Yew Lie; Saeidi, Mahnaz

    2010-01-01

    This paper presents preliminary findings from a research study in Australia, Malaysia and Iran on students' perceptions of the roles of supervisor and student in the production of their thesis and the contribution of their cultural knowledge to thesis development. The 360 respondents who answered an online survey were studying for their Master's…

  9. Corporate Production Transfers to Developing Countries

    DEFF Research Database (Denmark)

    Bruun, Peter; Wulff, Henrik

    1997-01-01

    Production transfer is defined by the set of activities attached to send off, receipt and running-in a production system in a new environment. The activities concern handling of physical elements as well as non-material, knowledge based issues like documentation, education/training and management...

  10. Effectiveness of narrative pedagogy in developing student nurses' advocacy role.

    Science.gov (United States)

    Gazarian, Priscilla K; Fernberg, Lauren M; Sheehan, Kelly D

    2016-03-01

    The literature and research on nursing ethics and advocacy has shown that generally very few nurses and other clinicians will speak up about an issue they have witnessed regarding a patient advocacy concern and that often advocacy in nursing is not learned until after students have graduated and begun working. To evaluate the effectiveness of narrative pedagogy on the development of advocacy in student nurses, as measured by the Protective Nursing Advocacy Scale. We tested the hypothesis that use of a narrative pedagogy assignment related to ethics would improve student nurse's perception of their advocacy role as measured by the Protective Nursing Advocacy Scale using a quasi-experimental nonrandomized study using a pre-test, intervention, post-test design. Data collection occurred during class time from October 2012 to December 2012. The Protective Nursing Advocacy Scale tool was administered to students in class to assess their baseline and was administered again at the completion of the educational intervention to assess whether narrative pedagogy was effective in developing the nursing student's perception of their role as a patient advocate. Students were informed that their participation was voluntary and that the data collected would be anonymous and confidential. The survey was not a graded assignment, and students did not receive any incentive to participate. The institutional review board of the college determined the study to be exempt from review. School of Nursing at a small liberal arts college in the Northeastern United States. A consecutive, nonprobability sample of 44 senior-level nursing students enrolled in their final nursing semester was utilized. Results indicated significant differences in student nurse's perception of their advocacy role related to environment and educational influences following an education intervention using an ethics digital story. Using the Protective Nursing Advocacy Scale, we were able to measure the effectiveness of

  11. Recent progress in development of radioisotope production

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Byung Mok [HANARO Center, Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1998-10-01

    The Korea multipurpose research reactor, HANARO(Hi-flux Advanced Neutron Application Reactor) is designed and constructed to obtain high density neutron flux (max. 5x10{sup 14} n/cm{sup 2}{center_dot}sec) with relatively low thermal output (30 MW) in order to utilize for various studies such as fuel and material test, radioisotope production, neutron activation analysis, neutron beam experiment, neutron transmutation doping, etc. HANARO has 32 vertical channels (3 in-core, 4 out-core, 25 reflector) and 7 horizontal channels. KAERI has constructed 4 concrete hot cells for production of Co-60, Ir-192, etc. and 6 lead hot cells for production of medical RIs(I-131, Mo-99, etc.). Other 11 lead hot cells will be completed by Feb. 1998 for production of Sm-153, Dy-165, Ho-166, etc. Clean room facilities were installed for production of radiopharmaceuticals. (author)

  12. Development of fission Mo-99 production technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Ho; Choung, W. M.; Lee, K. I. and others

    2000-05-01

    Fission Mo-99 is the only parent nuclide of Tc-99m, an extremely useful tool for mdeical diagnosis, with an estimated usage of greater than 80% of nuclear medicine applicatons. HEU and LEU targets to optimize in HANARO irradiation condition suggested and designed for domestic production of fission Mo-99. The optimum process conditions are established in each unit process to meet quality requirements of fission Mo-99 products, and the results of performance test in combined process show Mo separation and purification yield of the above 97%. The concept of Tc generator production process is established, and the result of performance test show Tc production yield of 98.4% in Tc generator procuction process. The drafts is prepared for cooperation of technical cooperation and business investment with foreign country. Evaluation on economic feasibility is accompanied for fission Mo-99 and Tc-99m generator production.

  13. Development of fission Mo-99 production technology

    International Nuclear Information System (INIS)

    Park, Jin Ho; Choung, W. M.; Lee, K. I. and others

    2000-05-01

    Fission Mo-99 is the only parent nuclide of Tc-99m, an extremely useful tool for mdeical diagnosis, with an estimated usage of greater than 80% of nuclear medicine applicatons. HEU and LEU targets to optimize in HANARO irradiation condition suggested and designed for domestic production of fission Mo-99. The optimum process conditions are established in each unit process to meet quality requirements of fission Mo-99 products, and the results of performance test in combined process show Mo separation and purification yield of the above 97%. The concept of Tc generator production process is established, and the result of performance test show Tc production yield of 98.4% in Tc generator procuction process. The drafts is prepared for cooperation of technical cooperation and business investment with foreign country. Evaluation on economic feasibility is accompanied for fission Mo-99 and Tc-99m generator production

  14. Tutoring and Mentoring for Student Development

    African Journals Online (AJOL)

    She is the. Book Review editor and a member of the JSAA Editorial Executive. ... for Educational Development (ICED) and the Higher Education Learning and Teaching ... uploading and indexing on our various e-platforms and printing. Finally ...

  15. What and how about customer-driven product development

    DEFF Research Database (Denmark)

    Sommer, Anita Friis; Steger-Jensen, Kenn

    2012-01-01

    Collaborative product development is of increasing interest as customer demands increases while product life cycles decrease. This study investigates how suppliers handle active customers including managing customer requests for new products and customer-driven product development. A large...... structured literature review of the top 20 supply chain management journals is conducted to explore existing literature. Research states the importance of active integration in product development, but does not provide answers to how suppliers can manage this in practice. A 2x2 matrix is developed describing...... the differing views on customers in existing research including customer actions on both new and existing products....

  16. A comprehensive medical student career development program improves medical student satisfaction with career planning.

    Science.gov (United States)

    Zink, Brian J; Hammoud, Maya M; Middleton, Eric; Moroney, Donney; Schigelone, Amy

    2007-01-01

    In 1999, the University of Michigan Medical School (UMMS) initiated a new career development program (CDP). The CDP incorporates the 4-phase career development model described by the Association of American Medical Colleges (AAMC) Careers in Medicine (CiM). The CDP offers self-assessment exercises with guidance from trained counselors for 1st- and 2nd-year medical students. Career exploration experiences include Career Seminar Series luncheons, shadow experiences with faculty, and a shadow program with second-year (M2) and fourth-year (M4) medical students. During the decision-making phase, students work with trained faculty career advisors (FCA). Mandatory sessions are held on career selection, preparing the residency application, interviewing, and program evaluation. During the implementation phase, students meet with deans or counselors to discuss residency application and matching. An "at-risk plan" assists students who may have difficulty matching. The CiM Web site is extensively used during the 4 stages. Data from the AAMC and UMMS Graduation Questionnaires (GQ) show significant improvements for UMMS students in overall satisfaction with career planning services and with faculty mentoring, career assessment activities, career information, and personnel availability. By 2003, UMMS students had significantly higher satisfaction in all measured areas of career planning services when compared with all other U.S. medical students.

  17. Engaging the audience: developing presentation skills in science students.

    Science.gov (United States)

    Stuart, Ann E

    2013-01-01

    This article describes a graduate class in presentation skills ("PClass") as a model for how a class with similar objectives, expectations and culture might be mounted for undergraduates. The required class is given for students in neuroscience and physiology programs at the University of North Carolina at Chapel Hill; I describe the class in the years I led it, from 2003-2012. The class structure centered on peer rehearsal, critiquing of PowerPoint, and chalk talks by the students; video-recording of student talks for later review by the student with the instructor; and presentation of polished talks in a formal setting. A different faculty visitor to the class each week gave the students a variety of perspectives. The students also gained insight into their own evolving skills by discussing the strengths and weaknesses of seminars given by visitors to the campus. A unique feature of the class was collaboration with a professional actor from the University's Department of Dramatic Arts, who helped the students develop techniques for keeping the attention of an audience, for speaking with confidence, and for controlling nervousness. The undergraduate campus would be expected to lend itself to this sort of interdisciplinary faculty cooperation. In addition, students worked on becoming adept at designing and presenting posters, introducing speakers graciously and taking charge of the speaker's question session, and speaking to a lay audience.

  18. The Current of Continuing Professional Development for Product Designers

    OpenAIRE

    山内, 勉; Yamauchi, Tsutomu

    2010-01-01

    Product Designers are required some skills and knowledge in the product development. Based on my professional career, I presumed three skills, they are, Technical skills, Conceptual skills and Human skills. In this study, I interviewed some Product Designers to make sure what skills are needed in the product development process. It emerged that Product Designers are expected to improve their Conceptual and Human skills besides Technical skills for playing a part at the upper and lower stage o...

  19. Proposal for product development model focused on ce certification methodology

    Directory of Open Access Journals (Sweden)

    Nathalia Marcia Goulart Pinheiro

    2015-09-01

    Full Text Available This paper presents a critical analysis comparing 21 product development models in order to identify whether these structures meet the demands Product Certification of the European Community (CE. Furthermore, it presents a product development model, comprising the steps in the models analyzed, including improvements in activities for referred product certification. The proposed improvements are justified by the growing quest for the internationalization of products and processes within companies.

  20. Development of E-Book Multimedia Model to Increase Critical Thinking of Senior High School Students

    Directory of Open Access Journals (Sweden)

    Suparno Suparno

    2018-03-01

    Full Text Available This study aims to develop the interactive e-book multimedia model to improve the students' critical thinking ability (KBK. Critical thinking is very important to develop because it provides a high level of reasoning thinking that provides permanent experience to students through conscious and controlled decision making in a rational, reflective, responsible manner with the optimization of potential. Flash-based e-book media is capable of interactively loading videos, pictures, practice questions and learning with directed directions from the teacher. The research method developed is research and development. The output products are learning plan, KBK evaluation question, flash-based interactive e-book multimedia, and quasi experiment to see media effectiveness to KBK. The results showed that e-book multimedia is able to significantly increase the KBK of high school students in economic learning.

  1. A formative model for student nurse development and evaluation

    Directory of Open Access Journals (Sweden)

    A. S. van der Merwe

    1996-03-01

    Full Text Available Preparing student nurses for the profession is a complex task for nurse educators; especially when dealing with the development of personal and interpersonal skills, qualities and values held in high esteem by the nursing profession and the community they serve. These researchers developed a model for formative evaluation of students by using the principles of inductive and deductive reasoning. This model was implemented in clinical practice situations and evaluated for its usefulness. It seems that the model enhanced the standards of nursing care because it had a positive effect on the behaviour of students and they were better motivated; the model also improved interpersonal relationships and communication between practising nurses and students.

  2. Bioethanol production from crops - recent developments

    International Nuclear Information System (INIS)

    Dalton, Colin

    1992-01-01

    The author notes much higher rates of ethanol production in Brazil and the United States of America than in the European Economic Community. While bioethanol from arable crops makes environmental sense there is, at present, a sizeable difference between the value of fuel ethanol (Pound 100-130/t) and the cost of producing it (Pound 236-Pound 450/t). This gap could be remedied using excise duty. Farmers would like to change crop production but await a political initiative. The technology for bioethanol production still needs some fine tuning, with ETBE (an ether produced from reacting isobutylene with ethanol) being preferred to other methods. (UK)

  3. Developing products and services for a deregulated market while regulated

    International Nuclear Information System (INIS)

    Haites, E.F.

    1997-01-01

    Products and services developed for a deregulated electric power industry were discussed. The wide-ranging discussion covered products created by unbundling existing services, new products and services related to energy use, products created by expansion into communications services, and the pricing of products and services. In addition to products and services, the discussion also covered strategies for a deregulated market and the challenges of raising equity capital in a regulated environment

  4. Challenges associated with knowledge sharing in international product development teams

    DEFF Research Database (Denmark)

    Sonne, Anne-Mette; Harmsen, Hanne

    on product development teams, knowledge sharing, and international product development management to form a conceptual framework of factors that influence knowledge sharing in international teams. Four in-depth case studies are used to explore and expand the understanding of the challenges associated...... with international product development teams. Results indicate that international product development might not be as international as would be expected and that even if many of the characteristics and problems associated with international product development in the literature are found, there are also a number...

  5. Developing Student Voices on the Internet.

    Science.gov (United States)

    Dresang, Eliza T.

    1997-01-01

    Books and online discussion groups encourage youth to develop strong narrative voices. Includes an annotated bibliography of books and Internet sites dealing with discovering the self and others; exploring race, culture, archeology, technology, war, poverty, gender and urban problems; creating and critiquing stories; and publishing industry…

  6. Tutoring and Mentoring for Student Development

    OpenAIRE

    Luescher Thierry M.; Schreiber Birgit; Moja Teboho

    2017-01-01

    This guest-edited issue of JSAA focuses on tutoring and mentoring and draws in parts on papers that were presented at the 2016 joint conference of the International Consortium for Educational Development (ICED) and the Higher Education Learning and Teaching Association of Southern Africa (HELTASA).

  7. Career Development among Undergraduate Students of Madda ...

    African Journals Online (AJOL)

    School of Psychology, College of Education and Behavioral Sciences, Addis Ababa University, Ethiopia. ... to take more demanding courses and development and use of career plans (Day as cited in. Yilfashewa, 2011). .... decision-making style, integration of life roles, value expression, and life-role self-concepts. (Herr et ...

  8. Education and Manpower development for Cleaner Production

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    1996-01-01

    An overview of the needs for education and training for dissemination and implementation of cleaner production. Expericne from training in companies and training of officials from public authorities and from integration into engineering, business and management and social science curricula...

  9. Market Dynamics and Productivity in Developing Countries

    International Development Research Centre (IDRC) Digital Library (Canada)

    Mining and Quarrying and manufacturing industrial production quantity index ..... Notably, the survival rate of the manufacture of wearing apparel, except footwear ...... Thus, weaknesses in design makes Tunisia's public credit registry a less ...

  10. Developing students' teaching through peer observation and feedback.

    Science.gov (United States)

    Rees, Eliot L; Davies, Benjamin; Eastwood, Michael

    2015-10-01

    With the increasing popularity and scale of peer teaching, it is imperative to develop methods that ensure the quality of teaching provided by undergraduate students. We used an established faculty development and quality assurance process in a novel context: peer observation of teaching for undergraduate peer tutors. We have developed a form to record observations and aid the facilitation of feedback. In addition, experienced peer tutors have been trained to observe peer-taught sessions and provide tutors with verbal and written feedback. We have found peer observation of teaching to be a feasible and acceptable process for improving quality of teaching provided by undergraduate medical students. However, feedback regarding the quality of peer observer's feedback may help to develop students' abilities further.

  11. Assessing Christian-Faith and Cognitive Development in College Students: CFCDS Instrument Development

    Science.gov (United States)

    Foote, Laura S.

    2013-01-01

    What happens when students go to college? An important outcome of college attendance is student cognitive development. Part of that developmental process is learning how to address contrasting values, beliefs, knowledge structures, and worldviews critically. This study addressed the relationship between cognitive and Christian-faith development in…

  12. Audiovisual physics reports: students' video production as a strategy for the didactic laboratory

    Science.gov (United States)

    Vinicius Pereira, Marcus; de Souza Barros, Susana; de Rezende Filho, Luiz Augusto C.; Fauth, Leduc Hermeto de A.

    2012-01-01

    Constant technological advancement has facilitated access to digital cameras and cell phones. Involving students in a video production project can work as a motivating aspect to make them active and reflective in their learning, intellectually engaged in a recursive process. This project was implemented in high school level physics laboratory classes resulting in 22 videos which are considered as audiovisual reports and analysed under two components: theoretical and experimental. This kind of project allows the students to spontaneously use features such as music, pictures, dramatization, animations, etc, even when the didactic laboratory may not be the place where aesthetic and cultural dimensions are generally developed. This could be due to the fact that digital media are more legitimately used as cultural tools than as teaching strategies.

  13. Modelling and using product architectures in mechatronic product development

    DEFF Research Database (Denmark)

    Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik

    , experiences by using the architecture representation in a mechatronic development project, and the scope of using the architecture model as a skeleton for a data structure in a PLM system. The fundamental idea for planning and modeling holistic architectures is that an improved understanding of the whole...

  14. Measuring Creative Capacity in Gifted Students: Comparing Teacher Ratings and Student Products

    Science.gov (United States)

    Kettler, Todd; Bower, Janessa

    2017-01-01

    Creativity and giftedness are frequently associated, and schools may use measures of creativity for identifying gifted and talented students. The researchers examined three aspects of elementary student creativity: (a) the relationship between a teacher's rating of student creativity and rubric-scored student writing samples, (b) group differences…

  15. Industrial Arts Test Development, Book III. Resource Items for Graphics Technology, Power Technology, Production Technology.

    Science.gov (United States)

    New York State Education Dept., Albany.

    This booklet is designed to assist teachers in developing examinations for classroom use. It is a collection of 955 objective test questions, mostly multiple choice, for industrial arts students in the three areas of graphics technology, power technology, and production technology. Scoring keys are provided. There are no copyright restrictions,…

  16. Assessing International Product Design and Development Graduate Courses: The MIT-Portugal Program

    Science.gov (United States)

    Dori, Yehudit Judy; Silva, Arlindo

    2010-01-01

    The Product Design and Development (PDD) course is part of the graduate curriculum in the Engineering Design and Advanced Manufacturing (EDAM) study in the MIT-Portugal Program. The research participants included about 110 students from MIT, EDAM, and two universities in Portugal, Instituto Superior Técnico-Universidade Técnica de Lisboa (IST) and…

  17. Pedagogical Management of University Students' Communication Ability Development

    Science.gov (United States)

    Anatolievna, Spirchagova Tatiana; Munirovna, Nasyrova Albina; Kasimovna, Vakhitova Dilyara; Mirzayanovna, Sadrieva Liliya; Anatolievna, Brodskaya Tatiana

    2017-01-01

    The development of social interaction forms emphasizes urgency and importance of the topic. The purpose of the study is to find out peculiarities of pedagogical management of university students' communication ability development. The leading approach to the research was the narrative approach which allows considering pedagogical management of…

  18. Curriculum Development for Enhancing Grade Nine Students' Systems Thinking

    Science.gov (United States)

    Hernthaisong, Preeyanan; Sitti, Somsong; Sonsupap, Kanyarat

    2015-01-01

    The objectives of this research were to study the development of a curriculum for enhancing grade 9 students' cognitive skills using a curriculum based on Systems Thinking Process. There were 3 phases: 1) studying of the problem; 2) development of tentative curriculum; and 3) implementation of the curriculum in a pilot study. The samples were 32…

  19. Educational Development for Responsible Graduate Students in the Neoliberal University

    Science.gov (United States)

    Vander Kloet, Marie; Aspenlieder, Erin

    2013-01-01

    In this article, we examine how our work in educational development, specifically in graduate student training, enacts the logic of neoliberalism in higher education in Canada. We approach this examination through a collaborative autoethnographic consideration of and reflection on our practices and experiences as educational developers, the design…

  20. Student Misbehaviors in Online Classrooms: Scale Development and Validation

    Science.gov (United States)

    Li, Li; Titsworth, Scott

    2015-01-01

    The current program of research included two studies that developed the Student Online Misbehaviors (SOMs) scale and explored relationships between the SOMs and various classroom communication processes and outcomes. The first study inductively developed initial SOM typologies and tested factor structure via an exploratory factor analysis.…

  1. Using Student Development Theories as Conceptual Frameworks in Leadership Education

    Science.gov (United States)

    Owen, Julie E.

    2012-01-01

    Theories of student learning and development are particularly important in leadership education because they make prescriptions about how people can adopt increasingly complex ways of being, knowing, and doing--essential forms of development for leadership learning. Increasingly, there is a call for leadership educators to adopt interdisciplinary…

  2. Students' Development of Structure Sense for the Distributive Law

    Science.gov (United States)

    Schüler-Meyer, Alexander

    2017-01-01

    After being introduced to the distributive law in meaningful contexts, students need to extend its scope of application to unfamiliar expressions. In this article, a process model for the development of structure sense is developed. Building on this model, this article reports on a design research project in which exercise tasks support students…

  3. Leading Our World Forward: An Examination of Student Leadership Development

    Science.gov (United States)

    Grunwell, Stewart G.

    2015-01-01

    This study seeks to examine the processes through which leadership is fostered and developed within student leadership development programs. While there has been some scholarly literature written in this area, a dearth in the literature exists with respect to providing a detailed chronicle and examination of the complete processes employed within…

  4. The Empty Shops Project: Developing Rural Students' Sociological Insight

    Science.gov (United States)

    Willis, Evan; Burns, Edgar

    2011-01-01

    An informal research project with high local relevance was developed for a first-year sociology course at an Australian rural university campus. The project developed students' sociological insight by challenging them to investigate "truths" about their own region, rather than immediately pushing them to comprehend new and different…

  5. School Library Development and Use by Staff and Students of ...

    African Journals Online (AJOL)

    This study investigated school library development and use by staff and students of secondary schools in the Federal capital territory, Abuja. The overall objective of the study is to examine the state of secondary school library development and its usage, find out if these libraries have achieved the expected level of ...

  6. DEVELOPMENT OF WOOD-BASED PRODUCTS WORLDWIDE

    Directory of Open Access Journals (Sweden)

    Marius C. BARBU

    2015-12-01

    Full Text Available The tendency in recent decades for manufacturing plants of semi-finished products such as composite panels, has been to invest in order to achieve high production capacities (>2,000 m³/day for panels and >3,000 t/day for paper with one line. The trend of concentrating the primary processing capacities and manufacturing wood-based panels will continue for the next few years not only in Europe but in North and South America as well. The ten largest panel manufacturers had a combined manufacturing capacity that exceeded a third of the worldwide production capacity. The financial crisis that started in 2008 has caused the closure of a large number of factories especially in North America and Central Europe. Small- and medium-sized producers will only survive if they will continue to specialize in the manufacture of panel types and sizes (niche products that are “unprofitable” for mega-groups. The installed production capacity worldwide of all wood-based composite panels combined (includes PY, PB, MDF, OSB rose by more than 2.5 times between 1980 and 2005 (225 mil.m³, and continues to increase despite the crises reaching approx. 300 mil.m³ in 2013. The forecast for the coming years varies greatly from continent to continent. In North America and Central Europe, both a consolidation of the available production capacities and the closure of less efficient older lines are expected. The lowest point of the effect of the financial crisis on the building industry seems to have been overcome. The furniture production companies will continue to move from one continent and region to another.

  7. PDC Journeys to Product Analysis Development and Additive Manufacturing?

    International Nuclear Information System (INIS)

    Shalina Sheik Muhamad

    2015-01-01

    The technology for product development and manufacturing has gone through many advancements. It is widely recognised that it would provide competitive advantage for engineering organization in term of product development cycle, productivity, sustainability and efficiency. We begin by describing the general characteristic of design process that will need to be integrated in product life cycle management. In Nuclear Malaysia, especially in engineering design activities the majority have been using 3D modelling. This paper discusses on the current product design practiced in Nuclear Malaysia, new product development process and new manufacturing technique which is additive manufacturing. (author)

  8. A Discussion of Professional Identity Development in Nursing Students

    Directory of Open Access Journals (Sweden)

    Cathy Maginnis

    2018-04-01

    Full Text Available Becoming a nurse requires development of professional capabilities, specifically socialisation into the profession and developing a professional identity (PI. A search of the literature highlights a lack of empirical research in PI development during pre-registration nursing education. A range of factors will be explored that relate to PI, including identity, professional socialisation, a sense of belonging to the profession and clinical placement. Exploring the development of a PI in nursing students can assist with identifying drivers and inhibitors. The aim of this paper is to describe PI development in pre-registration nursing students’ education and the relationship between development of a PI and the tertiary provided education. There are a multitude of factors that impact on developing a PI such as identity, professional socialisation, belonging, clinical placements and educators. Nursing students predominantly develop a nursing PI in the pre-registration program with professional socialisation through exposure to academia, clinical practice and role models. The onus of responsibility for developing a PI in nursing students is attributed to educational institutions. An expected outcome of the pre-registration program is that nursing students will have formed a PI. A greater depth of understanding PI is important in supporting the education of the nurses of the future. There may not be one simple explanation for what PI is, or how it is developed, but a greater depth of understanding of PI by both the tertiary sector and the nursing profession is important in supporting the education of the nurses of the future. Further research will enable a dialogue describing the development of a PI in nursing students and an understanding of the attributes and conceptions attributed to a nursing PI.

  9. Development of an instrument to measure student attitudes toward science fairs

    Science.gov (United States)

    Huddleston, Claudia A.

    Science fairs are woven into the very fabric of science instruction in the United States and in other countries. Even though thousands of students participate in science fairs every year, no instrument to measure student attitudes toward partaking in this hands-on learning experience has been fully developed and available for school administrators and teachers to assess the perceived value that current students attribute to participation in science fairs. Therefore, the purpose of this study was to continue the development and refinement of an instrument that measured student attitudes towards science fairs based on an unpublished instrument created by Michael (2005). The instrument developed and tested using 110 students at two different middle schools in southwest Virginia. The instrument consisted of 45 questions. After applying a principal component factor analysis, the instrument was reduced to two domains, enjoyment and value. The internal consistency of the instrument was calculated using Cronbach's alpha and showed good internal consistency of .89 between the two domains. Further analysis was conducted using a Pearson product-moment test and showed a significant positive correlation between enjoyment and value (r = .78). Demographic information was explored concerning the domains using a series of statistical tests, and results revealed no significant differences among race and science fair category. However, a significant difference was found among gender and students who won awards and those who did not. The conclusion was that further development and refinement of the instrument should be conducted.

  10. Product Innovation Development in the Companies of Creative Industries

    Directory of Open Access Journals (Sweden)

    Rolandas Strazdas

    2011-10-01

    Full Text Available Many authors distinguish product innovation as a key factor for long-term competitiveness. Dominant narrow perception of a product is leading towards incorrect product development process and the consequent result is a bad product. Narrow perception of a product is one of the main paralysing factors affecting the creator in the process of product development, which leads towards a low level of product innovation. As a result, a company is losing its uniqueness, originality, and is not of  interest neither for consumers nor the product developers themselves. This article deals with the product perception problems in the companies of creative industries. The main limiting factors for the perception of a product are analysed in the article as well as possibilities to expand the perception of a product. Five main product development methods: conservative, delegative, holistic, limited open, fully open are described in the article. The choice of the product development methods is especially important for the creative industries companies whose product development process is very intensive. 

  11. Company competencies as a network: The role of product development

    DEFF Research Database (Denmark)

    Harmsen, Hanne; Grunert, Klaus G.; Bove, Karsten

    2000-01-01

    investigate these matters in a survey with top managers in 513 Danish production companies. Ten areas important for achieving company objectives are identified. These are product development, market intelligence, production management, strategy and vision, sales, market responsiveness, promotion, internal co......-operation, image, and finally supply management. Product development is rated a fairly important competence as it ranks four with sales, market responsiveness, and production management as numbers one to three. Yet a distressing negative impact on overall company success is found for product development......Product development managers and academics like to assure themselves and each other that new product development is one of the most critical areas of company competence and contributes positively to company success But does top management agree? Because if they do not, the consequences will heavily...

  12. Sustainable Product Development Through a Life-Cycle Approach to Product and Service Creation (Keynote speech)

    DEFF Research Database (Denmark)

    McAloone, Timothy Charles

    . These two schools of environmental re-search practice are mirrored in the way in which industry approaches environmental problems. Since the definition in 1987 of Sustainable Development [2] efforts have been made to relate the goals and ideals of sustainabil-ity to the domain of product development, thus...... adding new dimensions, such as social and moral values, to the original agenda of environmental improvement. The redefinition of the role of the product developer, from environmentally conscious product de-veloper to sustainably aware product developer has led to new insights into the way in which...... products are developed and used ¿ and to where environmental effects occur in the lifetime of a product. The role of the product developer is thus more complex in relation to sustainability, as the focus for improvement of a product may not (and very often does not) lie in the physical artefactual...

  13. Development of student's skills of 3D modeling of assembly units

    Science.gov (United States)

    Chepur, P. V.; Boshhenko, T. V.

    2018-03-01

    The paper presents data on the influence of additives of the pre-treated aluminium oxide powder on the structure of cast lead-tin-based bronzes. The article demonstrates that modern, advanced from the point of view of automation, methods in designing products are the basis for the successful implementation of any production task. The advantages of product presentation in the form of an assembly consisting of 3D models of its details are described. The extreme importance of high-quality preparation of students of engineering specialties for work in computer-aided design programs such as AutoCAD, Compass 3D, Inventer|, Solid Edge, Solid Works, Revit, ANSYS is considered. It is established that one of the most effective forms of increasing the level of computer graphic preparation of students are academic competitions and contests on modeling and prototyping products. The stages of creation of assembly unit models in the AutoCad and Compass 3D software suits generally accepted both in design in a business environment and during training of specialists are considered. The developed 3D models of assembly units are presented in the course of preparation for academic competitions (called Academic Olympics in Russia) of students of the 2nd-5th years of study and the first year students of the master's program in engineering. The conclusions and recommendations on the development of the direction of three-dimensional design in the environment of higher education are given.

  14. Developing new markets for oil sands products

    International Nuclear Information System (INIS)

    Crandall, G.

    2004-01-01

    This paper presents a review by Purvin and Gertz of western Canadian crude oil supply. This energy consulting firm provides advise to the energy sector. It suggests that oil sands production will surpass declining conventional production. Oil sands supply includes bitumen, synthetic crude oil (SCO), and diluent. It is forecasted that oil sands will increase from 42 per cent of western supply in 2002 to 78 per cent in 2015. The potential of Alberta's oil sands was discussed along with a recent study of refined products and petrochemicals from bitumen. Upgrading, refining and petrochemical case studies were presented. The author examined if a Canadian oil sands upgrading project with high capital costs can be competitive with competing projects in the United States and internationally. In addition to supply and demand issues, the presentation examined infrastructure capability and market potential in the United States. The economic potential and risks of preferred business cases compared to upgrading to SCO were also evaluated. 15 figs

  15. An Empirical Study of Capability Development within Product Innovation Projects

    Directory of Open Access Journals (Sweden)

    Alireza Javanmardi Kashan

    2015-04-01

    Full Text Available The objective of this paper is to develop insights into firms’ strategic capability development processes within product innovation projects. In particular, the research aims at investigating the interactions among product innovation, knowledge processes, and capability development within firms. Building on qualitative data from the auto-industry, our analysis reveals that across four product innovation projects, the case company developed architectural knowledge and capability. Findings reveal that, along with changes at each level of product architecture, “design knowledge” and “design capability” have been developed at the same level of product architecture, leading to capability development at that level. Furthermore, findings suggest that such capability transformation resulting from knowledge and capability creation over the course of case projects leads to modularization of product architecture. Overall, the research contributes to identifying and emphasizing the role of micro processes in capability development and renewal, which in turn enhances our understanding of strategic capability development processes.

  16. Consequences of new product development speed : a meta-analysis

    NARCIS (Netherlands)

    Cankurtaran, P.; Langerak, F.; Griffin, A.

    2011-01-01

    Despite the widespread contention that development speed is a prerequisite for successful new product development, there exists insufficient, often conflicting empirical evidence regarding how speed relates to the different dimensions of new product success. Given that new product success is a

  17. Reflective journaling and development of cultural humility in students.

    Science.gov (United States)

    Schuessler, Jenny B; Wilder, Barbara; Byrd, Linda W

    2012-01-01

    Cultural humility requires self-evaluation and the awareness that one's own culture is not the only or best one. Teaching health care providers to become culturally humble includes the development of critical thinking skills and the ability to reflect on practice. Journaling as a teaching strategy helps students develop these skills. This article describes the use of reflective journaling as students progressed through four semesters of a community clinical experience. This qualitative, descriptive study was based on the principles of naturalistic inquiry with person-centered written reflections.Two hundred journal entries from 50 students were reviewed, and II themes were identified. Cultural humility cannot be learned merely in the classroom with traditional teaching methods. Reflection on experiences over time leads to the development of cultural humility.

  18. Parallel Development of Products and New Business Models

    OpenAIRE

    Lund, Morten; Hansen, Poul H. Kyvsgård

    2014-01-01

    The perception of product development and the practical execution of product development in professional organizations have undergone dramatic changes in recent years. Many of these chances relate to introduction of broader and more cross-disciplinary views that involves new organizational functions and new concepts. These chances can be captured in various generations of practice. This paper will discuss the recent development of 3rd generation product development process models and the emer...

  19. Problem-based learning: Developing resilience in nursing students

    Directory of Open Access Journals (Sweden)

    Jih-Yuan Chen

    2011-06-01

    Full Text Available A society needs mature and confident nurse practitioners, who are able to think analytically and flexibly, recognize needs for further preparation, and willing to engage in self-development. Concern is raised regarding how educators will build the capacity of resilient students with a knowledge base and a minimum set of skills in responding to various issues and for engaging in self-reflection. Drawing on the framework of nursing competencies and global standards for the education of professional nurses, resilient students may contribute through their social competence, problem-solving ability, sense of purpose, and persistence in the process to achieve the goal of the project. Educators should know how to build the resilient attribute in students by encouraging them to engage in self-reflection. This article discusses four areas that help students build resilience from project-based learning of a small group: the impact of problem-based learning at clinical practice, project/problem-based learning, resilient nursing student, and developing nursing students’ resilience. Self-assessment to check the promoting skills for teaching in a problem-based learning program helps the faculty holding the empowerment to encourage or support the students to face the challenge within the small team.

  20. Effect of Advertising on the Brand Loyalty of Cosmetic Products among College Students

    OpenAIRE

    Ababio, Abraham Gyamfi; Yamoah, Emmanuel Erastus

    2016-01-01

    This study explored the relationship between advertising and brand loyalty of cosmetic products. The multinomial logit model was used to ascertain the effect of advertising on different loyalty profiles for cosmetic products among college students. Based on a survey of 200 Ghanaian students drawn randomly, findings indicated that advertising plays no significant role on college students’ loyalty for cosmetic products. It can be argued, however, that the most promiscuous buyer is more amenable...

  1. Development of a career coaching model for medical students.

    Science.gov (United States)

    Hur, Yera

    2016-03-01

    Deciding on a future career path or choosing a career specialty is an important academic decision for medical students. The purpose of this study is to develop a career coaching model for medical students. This research was carried out in three steps. The first step was systematic review of previous studies. The second step was a need assessment of medical students. The third step was a career coaching model using the results acquired from the researched literature and the survey. The career coaching stages were defined as three big phases: The career coaching stages were defined as the "crystallization" period (Pre-medical year 1 and 2), "specification" period (medical year 1 and 2), and "implementation" period (medical year 3 and 4). The career coaching model for medical students can be used in programming career coaching contents and also in identifying the outcomes of career coaching programs at an institutional level.

  2. Using Rationale To Assist Student Cognitive And Intellectual Development

    Directory of Open Access Journals (Sweden)

    Janet E. Burge

    2010-01-01

    Full Text Available One of the questions posed at the National Science Foundation (NSF-sponsored workshop on Creativity and Rationale in Software Design was on the role of rationale in supporting idea generation in the classroom. College students often struggle with problems where more than one possible solution exists. Part of the difficulty lies in the need for students to progress through different levels of development cognitively and intellectually before they can tackle creative problem solving. Argumentation-based rationale provides a natural mechanism for representing problems, candidate solutions, criteria, and arguments relating those criteria to the candidate solutions. Explicitly expressing rationale for their work encourages students to reflect on why they made their choices, and to actively consider multiple alternatives. We report on an experiment performed during a Data Structures course where students captured rationale.

  3. Formalizing the concept phase of product development

    NARCIS (Netherlands)

    Schuts, M.; Hooman, J.

    2015-01-01

    We discuss the use of formal techniques to improve the concept phase of product realisation. As an industrial application, a new concept of interventional X-ray systems has been formalized, using model checking techniques and the simulation of formal models. cop. Springer International Publishing

  4. THE NECESSITY OF DEVELOPING BLUEBERRY PRODUCTION

    Directory of Open Access Journals (Sweden)

    Florentina BADIU

    2013-12-01

    Full Text Available This article presents the advantages of cultivating blueberries, both economically and from an alimentary and therapeutic point of view. By calculating profit per hectare for the most productive varieties of blueberry, it was shown that this culture is particularly profitable for young farmers. In fact, blueberries have significant therapeutic value, being used in food and pharmaceutical industry.

  5. Developments and constraints in fermentative hydrogen production

    NARCIS (Netherlands)

    Bartacek, J.; Zabranska, J.; Lens, P.N.L.

    2007-01-01

    Fermentative hydrogen production is a novel aspect of anaerobic digestion. The main advantage of hydrogen is that it is a clean and renewable energy source/carrier with high specific heat of combustion and no contribution to the Greenhouse effect, and can be used in many industrial applications.

  6. Subject-verb agreement: Error production by Tourism undergraduate students

    Directory of Open Access Journals (Sweden)

    Ana Paula Correia

    2014-11-01

    Full Text Available The aim of this paper, which is part of a more extensive research on verb tense errors, is to investigate the subject-verb agreement errors in the simple present in the texts of a group of Tourism undergraduate students. Based on the concept of interlanguage and following the error analysis model, this descriptive non-experimental study applies qualitative and quantitative procedures. Three types of instruments were used to collect data: a sociolinguistic questionnaire (to define the learners’ profile; the Dialang test (to establish their proficiency level in English; and our own learner corpus (140 texts. Errors were identified and classified by an expert panel in accordance with a verb error taxonomy developed for this study based on the taxonomy established by the Cambridge Learner Corpus. The Markin software was used to code errors in the corpus and the Wordsmith Tools software to analyze the data. Subject-verb agreement errors and their relation with the learners’ proficiency levels are described.

  7. A Development English Language Learning Management Strategies Model to Enhance Communicative Competence for High School Students

    Directory of Open Access Journals (Sweden)

    Thitiya Ruennakarn

    2017-09-01

    found that 80 percent of students were in developing level and 20 percent of students were at an accomplished level and communicative competence, 80 percent of students were in developing level and 20 percent of students were at an accomplished level. The results of 21st Century Skills such as 100 percent of Effective Communication Skill were at a good level, 80 percent of Digital Age Literacy Skill were at a good level and 20percent of students were moderate,70 percent of High Productivity Skill and Inventive Thinking Skill were in good level and 30 percent of students were moderate. The result of comparing English communicative competence between before and after using a model was found that after using a model was higher than before using the model with statistical significance at .05 level.

  8. Building Social Change Oriented Leadership Capacity Among Student Organizations: Developing Students and Campuses Simultaneously.

    Science.gov (United States)

    Kezar, Adrianna; Acuña Avilez, Arely; Drivalas, Yianna; Wheaton, Marissiko M

    2017-09-01

    This chapter highlights nontraditional forms of leadership development in student organizations. Using the social change model for leadership as a framework, the authors discuss the ways in which collectivist and activist approaches can result in similar skills obtained through traditional forms of leadership development. © 2017 Wiley Periodicals, Inc., A Wiley Company.

  9. Student project of optical system analysis API-library development

    Science.gov (United States)

    Ivanova, Tatiana; Zhukova, Tatiana; Dantcaranov, Ruslan; Romanova, Maria; Zhadin, Alexander; Ivanov, Vyacheslav; Kalinkina, Olga

    2017-08-01

    In the paper API-library software developed by students of Applied and Computer Optics Department (ITMO University) for optical system design is presented. The library performs paraxial and real ray tracing, calculates 3d order (Seidel) aberration and real ray aberration of axis and non-axis beams (wave, lateral, longitudinal, coma, distortion etc.) and finally, approximate wave aberration by Zernike polynomials. Real aperture can be calculated by considering of real rays tracing failure on each surface. So far we assume optical system is centered, with spherical or 2d order aspherical surfaces. Optical glasses can be set directly by refraction index or by dispersion coefficients. The library can be used for education or research purposes in optical system design area. It provides ready to use software functions for optical system simulation and analysis that developer can simply plug into their software development for different purposes, for example for some specific synthesis tasks or investigation of new optimization modes. In the paper we present an example of using the library for development of cemented doublet synthesis software based on Slusarev's methodology. The library is used in optical system optimization recipes course for deep studying of optimization model and its application for optical system design. Development of such software is an excellent experience for students and help to understanding optical image modeling and quality analysis. This development is organized as student group joint project. We try to organize it as a group in real research and development project, so each student has his own role in the project and then use whole library functionality in his own master or bachelor thesis. Working in such group gives students useful experience and opportunity to work as research and development engineer of scientific software in the future.

  10. PLM SOLUTION DESIGN FOR NEW PRODUCT DEVELOPMENT.-CASE STUDY

    OpenAIRE

    Varsha Arun Chitale*, Prof. R.B. Patil, Prof. Amol R. Patil

    2016-01-01

    In competition business environment, companies recognize the importance of collaboration throughout the entire product lifecycle. The main focus of the paper is on the collaboration in New Product Development (NPD) processes and how Product Lifecycle Management (PLM) strategy are likely to paradigm support advanced collaboration strategies, such as Mass Customization and Customer Co-Creation. The relation between these strategies and product lifecycle phases related to New Product Developmen...

  11. An Investigation into the Clinical Reasoning Development of Veterinary Students.

    Science.gov (United States)

    Vinten, Claire E K; Cobb, Kate A; Freeman, Sarah L; Mossop, Liz H

    Clinical reasoning is a fundamental skill for veterinary clinicians and a competency required of graduates by the Royal College of Veterinary Surgeons. However, it is unknown how veterinary students develop reasoning skills and where strengths and shortcomings of curricula lie. This research aimed to use the University of Nottingham School of Veterinary Medicine and Science (SVMS) as a case study to investigate the development of clinical reasoning among veterinary students. The analysis was framed in consideration of the taught, learned, and declared curricula. Sixteen staff and sixteen students from the SVMS participated separately in a total of four focus groups. In addition, five interviews were conducted with recent SVMS graduates. Audio transcriptions were used to conduct a thematic analysis. A content analysis was performed on all curriculum documentation. It was found that SVMS graduates feel they have a good level of reasoning ability, but they still experience a deficit in their reasoning capabilities when starting their first job. Overarching themes arising from the data suggest that a lack of responsibility for clinical decisions during the program and the embedded nature of the clinical reasoning skill within the curriculum could be restricting development. In addition, SVMS students would benefit from clinical reasoning training where factors influencing "real life" decisions (e.g., finances) are explored in more depth. Integrating these factors into the curriculum could lead to improved decision-making ability among SVMS graduates and better prepare students for the stressful transition to practice. These findings are likely to have implications for other veterinary curricula.

  12. An Emerging Theoretical Model of Music Therapy Student Development.

    Science.gov (United States)

    Dvorak, Abbey L; Hernandez-Ruiz, Eugenia; Jang, Sekyung; Kim, Borin; Joseph, Megan; Wells, Kori E

    2017-07-01

    Music therapy students negotiate a complex relationship with music and its use in clinical work throughout their education and training. This distinct, pervasive, and evolving relationship suggests a developmental process unique to music therapy. The purpose of this grounded theory study was to create a theoretical model of music therapy students' developmental process, beginning with a study within one large Midwestern university. Participants (N = 15) were music therapy students who completed one 60-minute intensive interview, followed by a 20-minute member check meeting. Recorded interviews were transcribed, analyzed, and coded using open and axial coding. The theoretical model that emerged was a six-step sequential developmental progression that included the following themes: (a) Personal Connection, (b) Turning Point, (c) Adjusting Relationship with Music, (d) Growth and Development, (e) Evolution, and (f) Empowerment. The first three steps are linear; development continues in a cyclical process among the last three steps. As the cycle continues, music therapy students continue to grow and develop their skills, leading to increased empowerment, and more specifically, increased self-efficacy and competence. Further exploration of the model is needed to inform educators' and other key stakeholders' understanding of student needs and concerns as they progress through music therapy degree programs. © the American Music Therapy Association 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  13. Psychoactive natural products: overview of recent developments

    Directory of Open Access Journals (Sweden)

    István Ujváry

    2014-03-01

    Full Text Available Natural psychoactive substances have fascinated the curious mind of shamans, artists, scholars and laymen since antiquity. During the twentieth century, the chemical composition of the most important psychoactive drugs, that is opium, cannabis, coca and "magic mushrooms", has been fully elucidated. The mode of action of the principal ingredients has also been deciphered at the molecular level. In the past two decades, the use of herbal drugs, such as kava, kratom and Salvia divinorum, began to spread beyond their traditional geographical and cultural boundaries. The aim of the present paper is to briefly summarize recent findings on the psychopharmacology of the most prominent psychoactive natural products. Current knowledge on a few lesser-known drugs, including bufotenine, glaucine, kava, betel, pituri, lettuce opium and kanna is also reviewed. In addition, selected cases of alleged natural (or semi-natural products are also mentioned.

  14. Development of Souvenir Production Transaction Processing System

    Science.gov (United States)

    Rumambi, H.; Kaparang, R.; Lintong, J.

    2018-01-01

    This research aims to design a souvenir production transaction processing system for the craftsmen in North Sulawesi. The craftsmen make very simple recordings about souvenir production transactions and use documents that are not in accordance with the generally accepted accounting practices. This research uses qualitative method. The data is collected through interviews, observations, documents and literatures studies. The research stages are conducted in preliminary studies, data collection, data analyzed and system design. The design of system is built from chart of account, accounting cycle and documents as input and get processed in accounting recording. The outputs are financial statements. The system design provides benefits for the craftsmen in assessing the financial performance and getting financing from bank.

  15. Productivity Research and Development Planning Workshop.

    Science.gov (United States)

    1986-03-01

    mission. These ideas must come from everyone in all echelons of the Comand. The MAC quality of worklife efforts consist of quality circles, labor-manage...that would not have been captured by the measure as initially formulated by the PIG. The balance of the plan and recommenda- tions made by the PMWG...people are doing things. We have the suggestion program, the quality of worklife program, and the Tech Mod program. All of these programs are productivity

  16. Development of the production of special steels for nuclear industries

    International Nuclear Information System (INIS)

    Vieillard-Baron, B.

    1977-01-01

    The development of electro-nuclear industries has a powerful impact on the production of special steels, although the quantity of material applied to the non-conventional parts of nuclear power plants is quite small as compared to the total production requirements in this industrial field. Evolution bears on the product research, development and testing methods, on the technical and marketing services - in particular the establishment of quality control teams and assurance manuals - and the implementation of high performance production equipments. Manufacturing must however take place under normal work load and productivity conditions of production tools, and thus ensure a satisfactory profitability on investments entailed [fr

  17. MODERNIZATION OF NATIONAL ECONOMY THROUGH DEVELOPMENT OF REGIONAL PRODUCTION INFRASTRUCTURE

    Directory of Open Access Journals (Sweden)

    T. G. Guilyadov

    2011-01-01

    Full Text Available Any region’s economy comprises production and non-production spheres which are interconnected and equivalent. Key part of any regional production sphere is its production infrastructure whose value is double: it defines the level of regional economic development on one hand, andinterrelation with the whole national economy on the other hand. The greatest and most important regional production infrastructure elements are transportation infrastructure, information/communication infrastructure and communal infrastructure. Analysis and solution of issues related to development of the basic regional production infrastructure elements as suggested in the article will be very useful for modernization of the national economy.

  18. Investigating product development strategy in beverage industry using factor analysis

    Directory of Open Access Journals (Sweden)

    Naser Azad

    2013-03-01

    Full Text Available Selecting a product development strategy that is associated with the company's current service or product innovation, based on customers’ needs and changing environment, plays an important role in increasing demand, increasing market share, increasing sales and profits. Therefore, it is important to extract effective variables associated with product development to improve performance measurement of firms. This paper investigates important factors influencing product development strategies using factor analysis. The proposed model of this paper investigates 36 factors and, using factor analysis, we extract six most influential factors including information sharing, intelligence information, exposure strategy, differentiation, research and development strategy and market survey. The first strategy, partnership, includes five sub-factor including product development partnership, partnership with foreign firms, customers’ perception from competitors’ products, Customer involvement in product development, inter-agency coordination, customer-oriented approach to innovation and transmission of product development change where inter-agency coordination has been considered the most important factor. Internal strengths are the most influential factors impacting the second strategy, intelligence information. The third factor, introducing strategy, introducing strategy, includes four sub criteria and consumer buying behavior is the most influencing factor. Differentiation is the next important factor with five components where knowledge and expertise in product innovation is the most important one. Research and development strategy with four sub-criteria where reducing product development cycle plays the most influential factor and finally, market survey strategy is the last important factor with three factors and finding new market plays the most important role.

  19. Development of performance assessment instrument based contextual learning for measuring students laboratory skills

    Science.gov (United States)

    Susilaningsih, E.; Khotimah, K.; Nurhayati, S.

    2018-04-01

    The assessment of laboratory skill in general hasn’t specific guideline in assessment, while the individual assessment of students during a performance and skill in performing laboratory is still not been observed and measured properly. Alternative assessment that can be used to measure student laboratory skill is use performance assessment. The purpose of this study was to determine whether the performance assessment instrument that the result of research can be used to assess basic skills student laboratory. This research was conducted by the Research and Development. The result of the data analysis performance assessment instruments developed feasible to implement and validation result 62.5 with very good categories for observation sheets laboratory skills and all of the components with the very good category. The procedure is the preliminary stages of research and development stages. Preliminary stages are divided in two, namely the field studies and literature studies. The development stages are divided into several parts, namely 1) development of the type instrument, 2) validation by an expert, 3) a limited scale trial, 4) large-scale trials and 5) implementation of the product. The instrument included in the category of effective because 26 from 29 students have very high laboratory skill and high laboratory skill. The research of performance assessment instrument is standard and can be used to assess basic skill student laboratory.

  20. Popular product development: strategy, innovation and decision making

    Directory of Open Access Journals (Sweden)

    Maria Cecília Sobral

    2007-09-01

    Full Text Available This work studies the decision process involved in the development of a popular product in Brazil for a multinational company. The method was case study. The product was launched in the market at the end of 2003, being the first popular product of the company in the world. Some interesting points of this study: a The importance of the new market (the bottom of income pyramid to the company; b The development of a product specifically addressed to the needs of this market with a totally customized solution; c The decision of a new product platform development.

  1. [Example of product development by industry and research solidarity].

    Science.gov (United States)

    Seki, Masayoshi

    2014-01-01

    When the industrial firms develop the product, the research result from research institutions is used or to reflect the ideas from users on the developed product would be significant in order to improve the product. To state the software product which developed jointly as an example to describe the adopted development technique and its result, and to consider the modality of the industry solidarity seen from the company side and joint development. The software development methods have the merit and demerit and necessary to choose the optimal development technique by the system which develops. We have been jointly developed the dose distribution browsing software. As the software development method, we adopted the prototype model. In order to display the dose distribution information, it is necessary to load four objects which are CT-Image, Structure Set, RT-Plan, and RT-Dose, are displayed in a composite manner. The prototype model which is the development technique was adopted by this joint development was optimal especially to develop the dose distribution browsing software. In a prototype model, since the detail design was created based on the program source code after the program was finally completed, there was merit on the period shortening of document written and consist in design and implementation. This software eventually opened to the public as an open source. Based on this developed prototype software, the release version of the dose distribution browsing software was developed. Developing this type of novelty software, it normally takes two to three years, but since the joint development was adopted, it shortens the development period to one year. Shortening the development period was able to hold down to the minimum development cost for a company and thus, this will be reflected to the product price. The specialists make requests on the product from user's point of view are important, but increase in specialists as professionals for product

  2. Product development for catering - how to integrate issues on nutrition, quality and environment in the products

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    1996-01-01

    Overview of the experience with integration of issues on nutrition, quality and environment from a development and technology assessment project about product development for the catering sector......Overview of the experience with integration of issues on nutrition, quality and environment from a development and technology assessment project about product development for the catering sector...

  3. An Enterprise Opportunity for Entrepreneurial Students: Student Enterprise Development and Experience Assessed through the Student Voice

    Science.gov (United States)

    Bell, Robin; Bell, Heather

    2016-01-01

    Purpose: The purpose of this paper is to investigate the effectiveness of an experiential learning approach, available to students in all disciplines that combined a hands-on entrepreneurial and enterprise experience with professional consultant mentoring by using a competition to win business start-up funding. Design/methodology/approach:…

  4. Company competencies as a network: The role of product development

    DEFF Research Database (Denmark)

    Harmsen, Hanne; Grunert, Klaus G.; Bove, Karsten

    2000-01-01

    Product development managers and academics like to assure themselves and each other that new product development is one of the most critical areas of company competence and contributes positively to company success But does top management agree? Because if they do not, the consequences will heavily...... influence the resource allocation to product development and career possibilities of NPD's. This study examines how top managers view the importance of product development relative to other central competence areas. While asking managers about their perception is one way of evaluating the importance, its...... contribution to company success is another important measure. In this study the impact of product development, relative to other important competence areas is measured to further assess how critical product development actually is for overall company success. Hanne Harmsen, Klaus G. Grunert and Karsten Bove...

  5. Integrated product development and experience of communication in education

    NARCIS (Netherlands)

    H. Ihle; Ir. Dick van Schenk Brill; Ir. Peter van Kollenburg; Ir. H.E.V. Veenstra

    2000-01-01

    The Technical Departments at the Fontys University of Professional Education in Eindhoven, The Netherlands, offer a course which is devel-oped around the principles of Concurrent Engi-neering. Integrated Product Development (IPD) project teams are multi-disciplinary groups which develop products in

  6. Improving Career Development in Students by Developing Job Analysis Skills

    Science.gov (United States)

    Cheramie, Robin A.

    2014-01-01

    One of the main goals of business school education is to prepare graduates for employment after graduation. However, many managers complain about the lack of communication skills developed in many graduates seeking employment in the job market (Abraham & Karns, 2009). This paper describes the experiential exercise designed to help students…

  7. Developing a Model of Teaching English to Primary School Students

    Directory of Open Access Journals (Sweden)

    Suwarsih Madya

    2004-01-01

    Full Text Available Under the auspices of the Centre for Curriculum Decelopment, a three-cycle action research study was carried out in three primary schools in Yogyakarta with the aim of developing a model of teaching English to primary school students. The model consists of five parts: Opening, Content Focus, Language Focus, Communication Focus, and Closing. The model, requiring that learning tasks involve active participation of students, both physically and mentally, supported by the use of media suitable for young learners, was developmentally fully implemented. The results showed that efforts were mostly made to establish teacher-student rapport in the first cycle, in which success in classroom management was gradually reached. This led to the easier second cycle, which was characterized by increasing teacher talk (classroom English, the use of interesting media, and more active students' participation in the tasks involving various games which successfully elicited students' English. All of this was solidified in the third cycle. The conclusion is that with the three aspects being focused successively, teacher-student good rapport being established, various media being used, and competing and cooperative tasks being assigned in balance, joyful and effective learning is likely to occur.

  8. Developing Critical Thinking Skills of Students in Mathematics Learning

    Directory of Open Access Journals (Sweden)

    Firdaus Firdaus

    2015-08-01

    Full Text Available Critical thinking skills should be owned by students. Therefore, schools should be responsible to develop and  evaluate critical thinking skills through teaching and learning process in schools. This study aims to identify the effects of mathematical learning modules based on problem-based learning to critical thinking skills at secondary school students in District of Bone. Assessment of critical thinking skills in mathematical problem solving non-routine includes three parts;  the identification and interpretation of information, information analysis, and evaluate of evidence and arguments. This study involved a total of 68 students grade 12 science state secondary school (SMAN in Bone District of South Sulawesi, Indonesia in academic year 2014-2015. The sample consists of 38 students in the city and 30 rural students. The design of the study was quasi experimental one group pretest-posttest. The data was analysed using the inferential t-test with SPSS 20.0 for windows. The study found that there are effects of the use of mathematical learning module based PBL to enhance the ability of critical thinking skills in mathematics students in all three components, namely, identifying and interpreting information, information analysis, and evaluate of evidence and argument.

  9. Consumer orientation of product developers and their product perception compared to that of consumers

    NARCIS (Netherlands)

    Sijtsema, S.J.; Backus, G.B.C.; Linnemann, A.R.; Jongen, W.M.F.

    2004-01-01

    This research concludes that although product developers (58, response rate 35%) and consumers (344, response rate 57%) perceive health and its relation to product characteristics in the same way, the perception of product developers is more extreme. Furthermore, factor analysis reveals four

  10. Chinese graduate students and U.S. scientific productivity

    Czech Academy of Sciences Publication Activity Database

    Gaulé, Patrick; Piacentini, M.

    2013-01-01

    Roč. 95, č. 2 (2013), s. 698-701 ISSN 0034-6535 Institutional support: RVO:67985998 Keywords : graduate students * Chinese immigrants * scientific output Subject RIV: AH - Economics Impact factor: 2.718, year: 2013

  11. DEVELOPING MATERIAL FOR COMMUNICATIVE LANGUAGE TEACHING (CLT TO TEACH ENGLISH FOR ECONOMICS STUDENTS

    Directory of Open Access Journals (Sweden)

    Aulia Hanifah Qomar

    2017-11-01

    Full Text Available The objectives of this research are to develop materials for CLT as an interesting media to learn English grammar, to know how material in CLT works as a media to learn and evaluate English grammar facilitates students to learn more grammar and to know the responses from the students to the materials in CLT. This research is Research and Development (R&D which use ADDIE design for the procedure. ADDIE design is stand for the procedure itself, these are Analyzing, Designing, Developing, Implementing and Evaluating. This research is designed by book material. The subject of this research is university students of Economic Faculty of Muhammadiyah University of Metro in the second semester. The instrument of this research is questionnaire. The questionnaire in this research is used to collect data which is divided into one aspects, is readability. The data is analyzed using Percentage Analysis Data. The data shows that the product is developed well. For the readability aspect, the result of expert is valid, one-to-one is valid, then in small group is increased to valid, and in the field test it is valid. Therefore, the product is developed well after each phase of the research. Based on the result of the research, the researcher concluds that the materials in CLT book can be learned attractively and interestingly. The students can understand the materials well. The learning process can be fun and comfortable for the students. The materials of CLT book media can be used in the class as a breakthrough of attractive and interactive learning which is very interesting for the students of earlier grade.

  12. The Effects of Problem-Based Learning with Flipped Classroom on Elementary Students' Computing Skills: A Case Study of the Production of Ebooks

    Science.gov (United States)

    Tsai, Chia-Wen; Shen, Pei-Di; Lu, Yu-Jui

    2015-01-01

    This study investigated, via quasi-experiments, the effects of problem-based learning with flipped classroom (FPBL) on the development of students' learning performance. In this study, 144 elementary school students were selected from sixth-grade sections taking a course titled "Production of Ebook," and were assigned into the following…

  13. Systematic Product Development of Control and Diagnosis Functionalities

    Science.gov (United States)

    Stetter, R.; Simundsson, A.

    2017-01-01

    In the scientific field of systematic product development a wide range of helpful methods, guidelines and tools were generated and published in recent years. Until now little special attention was given to design guidelines aiming at supporting product development engineers to design products that allow and support control or diagnosis functions. The general trend to ubiquitous computing and the first development steps towards cognitive systems as well as a general trend toward higher product safety, reliability and reduced total cost of ownership (TCO) in many engineering fields lead to a higher importance of control and diagnosis. In this paper a first attempt is made to formulate general valid guidelines how products can be developed in order to allow and to achieve effective and efficient control and diagnosis. The guidelines are elucidated on the example of an automated guided vehicle. One main concern of this paper is the integration of control and diagnosis functionalities into the development of complete systems which include mechanical, electrical and electronic subsystems. For the development of such systems the strategies, methods and tools of systematic product development have attracted significant attention during the last decades. Today, the functionality and safety of most products is to a large degree dependent on control and diagnosis functionalities. Still, there is comparatively little research concentrating on the integration of the development of these functionalities into the overall product development processes. The paper starts with a background describing Systematic Product Development. The second section deals with the product development of the sample product. The third part clarifies the notions monitoring, control and diagnosis. The following parts summarize some insights and formulate first hypotheses concerning control and diagnosis in Systematic Product Development.

  14. Card Product Use and Perception of Marketing Communication by Card Issuers among Students

    Directory of Open Access Journals (Sweden)

    Đurđana Ozretić Došen

    2011-06-01

    Full Text Available Student population is a very interesting and important segment of the market to the marketing practitioners involved in card business. The services and products offered by card issuers to students are created with a view to attracting the kind of users who will grow accustomed to a long-term, loyal use of a chosen card brand, i.e. beyond the point at which they complete their academic education. This paper describes the exploratory research on card products designed for the student population which was conducted in the Republic of Croatia. Student awareness of card products and their habits associated with card use were also examined. Additional areas of research were student attitudes and perceptions with regard to card products and to the appeal of the marketing communications which target this specific market segment. Results showed that the majority of students hold debit cards of the banks in which they have their current accounts. Students use cards actively, most of all for the purpose of withdrawing cash at automated teller machines (ATMs and least of all for Internet purchases. They assess card use as being simple, and card holders are also aware of the various benefits provided through it. However, the recall of advertisements for card products point to the conclusion that card issuers do not communicate with students in a manner which the latter would find appealing.

  15. The Productivity of Students' Schoolwork: An Exercise in Marxist Rigour

    Science.gov (United States)

    Baldino, Roberto Ribeiro; Cabral, Tânia Cristina Baptista

    2013-01-01

    In this article we will use central elements in Mature Marx's theory of productive labour to prove that not only the work of teachers and staff but also the expenditure of students' muscles and nerves is productive labour. This theme has some intersection with the work of housewives that autonomist Marxism asserts to be productive labour…

  16. Test of Science Process Skills of Biology Students towards Developing of Learning Exercises

    Directory of Open Access Journals (Sweden)

    Judith S. Rabacal

    2016-11-01

    Full Text Available This is a descriptive study aimed to determine the academic achievement on science process skills of the BS Biology Students of Northern Negros State College of Science and Technology, Philippines with the end view of developing learning exercises which will enhance their academic achievement on basic and integrated science process skills. The data in this study were obtained using a validated questionnaire. Mean was the statistical tool used to determine the academic achievement on the above mentioned science process skills; t-test for independent means was used to determine significant difference on the academic achievement of science process skills of BS Biology students while Pearson Product Moment of Correlation Coefficient was used to determine the significant relationship between basic and integrated science process skills of the BS Biology students. A 0.05 level of significance was used to determine whether the hypothesis set in the study will be rejected or accepted. Findings revealed that the academic achievement on basic and integrated science process skills of the BS Biology students was average. Findings revealed that there are no significant differences on the academic performance of the BS Biology students when grouped according to year level and gender. Findings also revealed that there is a significant difference on the academic achievement between basic and integrated science process skills of the BS Biology students. Findings revealed that there is a significant relationship between academic achievement on the basic and integrated science process skills of the BS Biology students.

  17. THE DEVELOPMENT OF INFORMATION COMPETENCES FOR MEDICAL STUDENTS

    Directory of Open Access Journals (Sweden)

    S. I. Karas

    2014-01-01

    Full Text Available The goal of this paper is the analysis of information communication technologies using for professional competencies development for medical students. There are described two informational learning technologies: standard and developed in Tomsk.Virtual learning environment Moodle is open source software which is developed for on-line education and installed in more than a dozen thousands educational institutions around the world including Russia. The Moodle provides students with rapid access to professional-oriented learning information via Internet any time and through any gadget. Using the Moodle a teacher can present different types of digital information, organize learning course, student’s knowledge and skills evaluation after structuring teacher’s knowledge. Rating approach is implemented in the Moodle very easy. Developed and develo­ping resources for the Moodle are located at the server http://simcenter.ssmu.ru.Learning electronic health record (LEHR is developing by Tomsk professional team and it is the integration of an electronic health record and a program for clinical subject. There are additional functions besides usual for paper medical record, for example: learning about specialized software, electronic re­ference books, and medical standard documents. Information and clinical competences are forming in LEHR at the same time what is the undoubted advantage for students. Now LEHR on pediatrics and neurology are testing before trial exploitation in the learning. Software for LEHR and information about virtual patients are located at the server http://students.umssoft.com.The analysis and our experience have shown the possibilities of effective using the information communication technologies for development of informational and professional competencies of medical students in different subjects of educational program.

  18. Product carbon footprint developments and gaps

    DEFF Research Database (Denmark)

    Kronborg Jensen, Jesper

    2012-01-01

    Purpose - Over the last decade, multiple initiatives have been undertaken to learn how to capture the carbon footprint of a supply chain at a product level. The purpose of this paper is to focus on the process of standardization to secure consistency of product carbon footprinting (PCF) and to ou....../value - Papers that outline the standardization process for PCF have been examined, but this paper adds value by categorizing the field, outlining the latest standards, and by being the first paper to compare standards for PCF on selected criteria and identify gaps....... when conducting a PCF, and a paradox exists concerning methods for securing future standardization of PCF. Research limitations/implications - Standards for evaluating emission of greenhouse gases (GHGs) in supply chains are evaluated without consideration of other environmental impacts. In addition......, the research only compares international standards, thereby excluding national initiatives. Practical implications - Standardization efforts can be expected to shape the future practice of measuring emission of GHGs in companies and supply chains which provides a framework for reducing impacts. Originality...

  19. [Medical students' sexuality--development and fulfilment of sexual needs].

    Science.gov (United States)

    Müldner-Nieckowski, Łukasz; Klasa, Katarzyna; Sobański, Jerzy A; Rutkowski, Krzysztof; Dembińska, Edyta

    2012-01-01

    Education in human sexual physiology and pathology, as well as own sexual health of medical doctors determines in a large proportion the ability to talk with patients about their sexual disorders. Therefore the authors considered important to collect and assess data regarding sexual health and development of Medical Faculty students. Analysis of selected aspects of psychosexual development and sex life of IVth grade medical students. We applied the self-report Questionnaire of Satisfaction with Sexual Life (KSS2), an instrument created to assess sexual problems in patients treated with group psychotherapy. Medical students filled the questionnaire when attending the courses of Psychopathology of neurotic disorders or Psychotherapy. Analysis of the collected data revealed a relatively high differentiation of the studied group in regard of satisfaction and experiences with sexual life, attitudes towards masturbation, relationships and sexual activity. Regarding some aspects, significant differences between women and men occurred. A set of factors were identified, some of them may negatively influence medical doctor's competencies in the domain of sexual health. These are not having sexual debut or even lack of any erotic experiences and lack of sexual satisfaction. The results indicate a significant prevalence of factors, which may impede students education as well as taking into consideration the sexual issues during the medical interview. Assessment of influence of students' and doctors' own sexuality on their competencies in diagnostics and treatment requires further studies.

  20. Innovation Partnerships to Enhance Student Learning and Development

    Science.gov (United States)

    Roberts, Dennis C.; Komives, Susan R.

    2016-01-01

    Following chapters that have offered examples and tools relevant to higher education institutions that wish to enhance student learning and development, this chapter summarizes and extends the conversation of how true partnerships in international higher education can be cultivated to achieve the deepest impact.

  1. Assessing Student Leadership Development From Mentoring, Coaching, and Advising.

    Science.gov (United States)

    Bureau, Daniel A; Lawhead, Justin

    2018-06-01

    Leadership educators must demonstrate the contributions their programs make to the learning and development of students. This chapter provides an overview of assessment principles for educators to apply in their practices of mentoring, coaching, and advising. © 2018 Wiley Periodicals, Inc.

  2. Breaking the Ice: Career Development Activities for Accounting Students

    Science.gov (United States)

    Kilpatrick, Bob G.; Wilburn, Nancy L.

    2010-01-01

    This paper describes two co-curricular career development activities, mock interviews and speed networking that we provide for accounting majors at our university. The driving force behind both activities was to increase comfort levels for students when interacting with professionals and to enhance their job interview and networking skills.…

  3. Developing and Using Dashboard Indicators in Student Affairs Assessment

    Science.gov (United States)

    Mitchell, Joshua J.; Ryder, Andrew J.

    2013-01-01

    Dashboard systems are increasingly popular as assessment and performance management tools in higher education. This chapter examines the use of dashboards in student affairs, including examples of key indicators and considerations for developing and implementing these tools. The chapter begins with an overview of the origins of dashboards, from…

  4. The Student Teacher Portfolio as Autobiography: Developing a Professional Identity.

    Science.gov (United States)

    Antonek, Janis L.; And Others

    1997-01-01

    Argues that student teacher portfolios are a viable, effective, appropriate tool for documenting teacher growth and development and for promoting reflective practice. Traces the unique paths of two pre-service foreign language teachers who constructed a professional identity from the historical and cultural conditions of their classroom…

  5. A Summer Leadership Development Program for Chemical Engineering Students

    Science.gov (United States)

    Simpson, Annie E.; Evans, Greg J.; Reeve, Doug

    2012-01-01

    The Engineering Leaders of Tomorrow Program (LOT) is a comprehensive curricular, co-curricular, extra-curricular leadership development initiative for engineering students. LOT envisions: "an engineering education that is a life-long foundation for transformational leaders and outstanding citizens." Academic courses, co-curricular certificate…

  6. Intentional Design of Student Organizations to Optimize Leadership Development.

    Science.gov (United States)

    Mainella, Felicia C

    2017-09-01

    This chapter addresses how a group's organizational structure can promote or hinder the leadership capacity of its members. The information in this chapter provides insight into structuring student organizations in a way to maximize all members' leadership development. © 2017 Wiley Periodicals, Inc., A Wiley Company.

  7. Developing Culturally Competent Teachers: An International Student Teaching Field Experience

    Science.gov (United States)

    Salmona, Michelle; Partlo, Margaret; Kaczynski, Dan; Leonard, Simon N.

    2015-01-01

    This study offers a theoretical construct for better understanding how experiential learning enables student teachers to acquire social and cultural variation skills, develop cultural empathy in the K-12 classroom, and the transference of these skills to new educational situations. An Australian and United States research team used a…

  8. Medical students' professional identity development in an early nursing attachment

    NARCIS (Netherlands)

    Helmich, Esther; Derksen, Els; Prevoo, Mathieu; Laan, Roland; Bolhuis, Sanneke; Koopmans, Raymond

    Objectives The importance of early clinical experience for medical training is well documented. However, to our knowledge there are no studies that assess the influence of very early nursing attachments on the professional development and identity construction of medical students. Working as an

  9. Medical students' professional identity development in an early nursing attachment.

    NARCIS (Netherlands)

    Helmich, E.; Derksen, E.; Prevoo, M.; Laan, R.F.J.M.; Bolhuis, S.; Koopmans, R.T.C.M.

    2010-01-01

    OBJECTIVES: The importance of early clinical experience for medical training is well documented. However, to our knowledge there are no studies that assess the influence of very early nursing attachments on the professional development and identity construction of medical students. Working as an

  10. Influence of newspapers in the development of student's reading ...

    African Journals Online (AJOL)

    Influence of newspapers in the development of student's reading culture in two Nigerian University Libraries. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... Information Impact: Journal of Information and Knowledge Management ... size of 200 and questionnaire was the major instrument used for data collection.

  11. Mapping What Young Students Understand and Value Regarding Sustainable Development

    Science.gov (United States)

    Manni, Annika; Sporre, Karin; Ottander, Christina

    2013-01-01

    This paper presents the results of a study carried out to investigate how 10-12 year old Swedish students understand and value the issue of sustainable development. The responses from open-ended questions in a questionnaire have been analyzed through a content analysis based on a phenomenographic approach. The results show that there are…

  12. Faith Development While Abroad amongst African American Students

    Science.gov (United States)

    Dinani, Thandiwe

    2018-01-01

    Spiritual development is an epistemological journey of seeking to make meaning of life's activities, order, and relationship between events (Love, 2002). This process occurs when students experience a degree of dissonance that pushes them to question what they know, how they know it, and expand their understanding based on new experiences and…

  13. The Development of Information Search Expertise of Research Students

    Science.gov (United States)

    Kai-Wah Chu, Samuel; Law, Nancy

    2008-01-01

    This study identifies the development of information search expertise of 12 beginning research students (six in education and six in engineering) who were provided with a set of systematic search training sessions over a period of one year. The study adopts a longitudinal approach in investigating whether there were different stages in the…

  14. Reflections on the Development of Research Potential of Graduate Students.

    Science.gov (United States)

    Scriven, Jolene

    1998-01-01

    Graduate students can develop research skills through extensive reading, computer searching, discussion, and application of journalistic questions to problem ideas. Advisors can help by intervening when motivation lags, organizing progress-review groups, and offering concrete editing suggestions and positive criticism. (SK)

  15. Enabling the development of student teacher professional identity ...

    African Journals Online (AJOL)

    This paper explores the views of student teachers who were provided vicarious learning opportunities during an educational excursion, and how the learning enabled them to develop their teacher professional identity. This qualitative research study, using a social-constructivist lens highlights how vicarious learning ...

  16. The Educational Technology of Ethical Development for Students

    Science.gov (United States)

    Song, Ting; Ustin, Pavel N.; Popov, Leonid M.; Mudarisov, Marat M.

    2017-01-01

    The relevance of this work was connected with the problem of ethical competencies forming among future psychologists during their learning in university. The first task of research was to work out the technology of ethical development for students-psychologists. The structure of this technology included four main educational components:…

  17. Qualitative and quantitative aspects of commitment development in psychology students

    NARCIS (Netherlands)

    Kunnen, E.S.

    We investigated the development of study- and work-related commitments in 28 psychology students during their bachelor years. Based on seven measurements of exploration and commitments (over a period of three-and-a-half years) We found the theoretically expected information-oriented, normative and

  18. Group Development for Students with Emotional/Behavioral Disorders.

    Science.gov (United States)

    Rockwell, Sylvia; Guetzloe, Eleanor

    1996-01-01

    This article addresses effective techniques for teaching students with emotional disturbances and/or behavior disorders in group settings. Three stages of group development are described with specific teaching strategies for each stage identified and related to Maslow's hierarchy of needs, including needs for safety and trust, belonging and…

  19. Conceptions of Student Talent in the Context of Talent Development

    Science.gov (United States)

    Rasmussen, Annette; Rasmussen, Palle

    2015-01-01

    This paper reports from a case study of a "talent class", a special development programme for talented pupils, established in a Danish municipality. It analyses student backgrounds and motives for joining this talent class programme, which is seen in relation to ordinary schooling in Denmark. Drawing on Bourdieu, the paper links social…

  20. Bulls, Goats, and Pedagogy: Engaging Students in Overseas Development Aid

    Science.gov (United States)

    Miles, William F. S.

    2009-01-01

    This article illustrates the profound learning that occurs--for students and instructor alike--when a class on third-world development attempts to undertake foreign aid. With undergraduate, graduate, and departmental money, I purchased bulls and carts for farmers, and goats for widows, in two West African villages. Such experiential learning…

  1. Benchmarks: The Development of a New Approach to Student Evaluation.

    Science.gov (United States)

    Larter, Sylvia

    The Toronto Board of Education Benchmarks are libraries of reference materials that demonstrate student achievement at various levels. Each library contains video benchmarks, print benchmarks, a staff handbook, and summary and introductory documents. This book is about the development and the history of the benchmark program. It has taken over 3…

  2. Guiding College Students to Develop Academic Self-Regulatory Skills

    Science.gov (United States)

    Chen, Pin-Hwa

    2011-01-01

    This study aimed to explore the efficaciousness of a guiding model for Taiwanese college students employed to develop their academic self-regulatory skills. Twenty-eight undergraduates in a university in southern Taiwan were recruited as participants. The participants received training on the proposed guiding model and were asked to take their own…

  3. Understanding the Career Development of Underprepared College Students

    Science.gov (United States)

    Hughes, Amber N.; Gibbons, Melinda M.

    2018-01-01

    The purpose of this study was to examine the career development of underprepared college students using relational career theory. Specifically, the constructs of family influence, locus of control, and career decision-making self-efficacy were explored as they relate to perceived success in college. Significant correlations between external locus…

  4. Development of Guided Inquiry-Based Student Lab Worksheet on the Making of Pineapple Flavoring

    Science.gov (United States)

    Dwiyanti, G.; Suryatna, A.; Taibah, I.

    2017-02-01

    The aim of this research was to develop guided inquiry based student lab worksheet on making pineapple flavour and knowing the quality of worksheet that is being developed. Research methods that is being conducted is research and development that is limited by a preliminary studies (literature studies, field surveys, and preparation of the initial product) and development of the model (within limited testing). The results from analyze the books sources and fields survey showed that the characteristic of esterification lab worksheet that currently available still in the direct instruction form (cookbook). The optimization result of making pineapple flavour experiment that was conducted are the ethanol volume 3 mL, butyric acid volume 2 mL, sulfuric acid 5 drops, saturated NaHCO3 solution volume 9 mL, and temperature of heating was 80 °C. The characteristic of guided inquiry based student lab worksheet that was developed contained phenomenon and instructions that suitable with inquiry stages to guide the students in doing the experiment of making pineapple flavour. The evaluation of designated teachers and lecturers of the developed student worksheet were very good (96,08%). Lab-experiment feasibility achieved by using guided inquiry based student lab worksheets that is being developed based on the inquiry stages that conducted by student were found very good (97,50%) and accomplishment based on students’ answer of the tasks in the worksheet were found very good (83,84%). Students’ responses of the experiments using the developed worksheet are found very good (81,84%).

  5. What Happens to Integrated Product Development Models with Product/Service-System Approaches?

    DEFF Research Database (Denmark)

    Tan, Adrian; McAloone, Timothy Charles; Andreasen, Mogens Myrup

    2006-01-01

    Integrated Product Development (IPD) has traditionally focused on the development activities relating to physical technological artefacts. With the advent of business approaches for manufacturing firms based on providing customers the utility of integrated products and services – a term dubbed...... ‘product/service-systems (PSS)’ – companies need to extend their activities to include new dimensions of development. Within the paradigm of mass production and consumption, traditional product-oriented business strategies regarded physical technological artefacts (products) as the mediators of customer...... value. Value was based on the exchange of products between a providing company and a receiving customer. The more products the company could sell, the more revenue it generated. At the point of sale the ownership and responsibility of the product was transferred from company to customer. A customer...

  6. Importance of creativity development for Commercial Engineering career students from the teaching-learning process

    Directory of Open Access Journals (Sweden)

    Vicenta Rocío Piguave Pérez

    2014-04-01

    Full Text Available The objective of this work is to place the importance of creativity development for students into university contexts, therefore a diagnosis of the issue is presented in the students who aspire to reach higher levels of personal development and emotional health in social environments increasingly complex and competitive, to the demands of the entrepreneurial sector towards professionals in order to solve in an original and independent way, the decision-making processes, products and innovative services generation that solve problems on the field as a way to improvetheir quality of life. This study was conducted with students from «Universidad Laica Eloy Alfarode Manabí» in the career of Commercial Engineering, through a survey and additionally interviews were conducted to professors to supplement the information gathered by the survey. The synthesis of the results and recommendations are presented for routing teaching tasks placing the professor as the main promoter ofcreativity from the learning process.

  7. The peculiarities of physical development of pupils and students

    Directory of Open Access Journals (Sweden)

    E.E. Menshikh

    2013-12-01

    Full Text Available Presented results of physical development of young people. 965 pupils and 438 students participated in research. One measured length and mass of the body, registered cardiorespiratory indexes – cardiac rate at peace and after 20 squats, vital capacity of lungs, breath-holding on inhalation and exhalation. The coefficient of physical development was calculated on a formula taking into account actual and middling population indexes. Gradual development of morphofunctional indexes is set for pupils and students from 7 to 20 years old. Rates of such changes were different both in age-old and sexual groups. It is educed that for boys and girls 7-8 years middling the statistical values of coefficient of physical development exceeded standard indexes. In 9-13 years on a background of further increase of morphofunctional parameters the rates of increase of physical development diminished a bit. From 13 to 16 years the index of coefficient of physical development changed a little, except for an insignificant increase in 14 years. It is shown that in an age-old period 17-20 years a mesosomia prevails for the inspected students. It is educed reliable differences between the values of coefficient of physical development in the groups of boys and girls 17 and 19 years.

  8. Building Opportunities for Environmental Education Through Student Development of Cyberinfrastructure

    Science.gov (United States)

    Moysey, S. M.; Boyer, D. M.; Mobley, C.; Byrd, V. L.

    2014-12-01

    It is increasingly common to utilize simulations and games in the classroom, but learning opportunities can also be created by having students construct these cyberinfrastructure resources themselves. We outline two examples of such projects completed during the summer of 2014 within the NSF ACI sponsored REU Site: Research Experiences for Undergraduates in Collaborative Data Visualization Applications at Clemson University (Award 1359223). The first project focuses on the development of immersive virtual reality field trips of geologic sites using the Oculus Rift headset. This project developed a platform which will allow users to navigate virtual terrains derived from real-world data obtained from the US Geological Survey and Google Earth. The system provides users with the ability to partake in an interactive first-person exploration of a region, such as the Grand Canyon, and thus makes an important educational contribution for students without access to these environmental assets in the real world. The second project focused on providing players visual feedback about the sustainability of their practices within the web-based, multiplayer watershed management game Naranpur Online. Identifying sustainability indicators that communicate meaningful information to players and finding an effective way to visualize these data were a primary challenge faced by the student researcher working on this project. To solve this problem the student translated findings from the literature to the context of the game to develop a hierarchical set of relative sustainability criteria to be accessed by players within a sustainability dashboard. Though the REU focused on visualization, both projects forced the students to transform their thinking to address higher-level questions regarding the utilization and communication of environmental data or concepts, thus enhancing the educational experience for themselves and future students.

  9. Crisis Situations in Engineering Product Development

    DEFF Research Database (Denmark)

    Muenzberg, Christopher; Hammer, Jens; Brem, Alexander

    2016-01-01

    approaches reduce the problem identification time and increase the efficiency of crisis management. The goal of this research is to identify methods which are able to support the crisis management process successfully. Therefore, a literature-based analysis of developing methods, especially TRIZ is conducted......Crisis situations are special situations during the development process. They are characterized by time and handling pressure. Therefore, it is necessary to identify and apply a methodical problem solving approach to overcome these situations. Due to their prescriptive character, problem solving...

  10. Strength development of concrete : balancing production requirements and ecological impact

    NARCIS (Netherlands)

    Onghena, S.; Grunewald, S.; Schutter, G; Jaime C., Galvez; Aguado de Cea, Antonio; Fernandez-Ordonez, David; Sakai, Koji; Reye s, Encarnación; Casati, Maria J .; Enfedaque, Alejandro; Alberti, Marcos G.; de la Fuente, Albert

    2016-01-01

    The effective production of concrete structures requires adequate control of
    strength development in order to realise the scheduled production cycles. Demoulding of elements can take place only when sufficient strength is gained and the production cycle has to be maintained with seasonal changes

  11. Towards the production of EPA: a developing country perspective

    CSIR Research Space (South Africa)

    Maharajh, Dheepak M

    2015-03-01

    Full Text Available are focussed towards increased production of high purity EPA. This provides a window of opportunity for a supply of competing products that are rich in algal EPA. Recently the CSIR developed a technology for the production of EPA by an indigenous algal isolate...

  12. The Chemistry Exercise for a Students Cognitive Development

    OpenAIRE

    Tomiņa, Līvija

    2009-01-01

    ABSTRACT The Chemistry Exercise for a Student’s Cognitive Development. Tomina L., supervisor Dr. Chem., doc. Krumina A. A. The aim of this doctoral work is the study of chemistry exercises as part of a student’s cognitive development during his chemistry education at school. Our preliminary research showed us that during the last 10 – 13 years student interest in solving chemistry exercises has diminished dramatically. As part of our work we have conceptualized an approach to solving ch...

  13. Upgrade and Development of Nuclear Data Production Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-04-15

    It is necessary to improve the Pohang Neutron Facility (PNF) in order to be used as a nuclear data production facility for users in both domestic and abroad. We improved following items: (1) upgrade the electron linac, (2) collimators inside the TOF beam pipe, (3) the development and installation of an automatic sample changer, (4) the extension of the TOF beam line, and (5) the data acquisition system. We would like to establish a utilization system for users to measure the nuclear data at the PNF. To do this, we made manuals for the accelerator operation and the data acquisition system. We also made an application form to apply for users to measure the nuclear data in both domestic and abroad. The main object of the Pohang Neutron Facility is to measure the nuclear data in the neutron energy region from thermal neutron to few hundreds of eV. In addition to neutron beams produced at the PNF, photon and electron beams are produced in this facility. We thus utilize this facility for other fields, such as test facility for detectors, activation experiments, polarized neutron beam source, and so on. In addition to these, we could use this facility for training students

  14. Upgrade and development of nuclear data production test facility

    Energy Technology Data Exchange (ETDEWEB)

    Namkung, Won; Ko, I. S.; Cho, M. H.; Lee, Y. S.; Kang, H. S. [Pohang Univ. of Science and Technology, Pohang (Korea, Republic of); Kim, G. N. [Kyungpook National Univ., Daegu (Korea, Republic of); Koh, S. K. [Univ. of Ulsan, Ulsan (Korea, Republic of); Ro, T. I. [Donga Univ., Busan (Korea, Republic of); Choi, G. U. [Korea Research Institute of Standards and Science, Daejeon (Korea, Republic of)

    2005-04-15

    It is necessary to improve the Pohang Neutron Facility (PNF) in order to be used as a nuclear data production facility for users in both domestic and abroad. We improved following items: upgrade the electron linac, collimators inside the TOF beam pipe, the development and installation of an automatic sample changer, the extension of the TOF beam line, and the data acquisition system. We would like to establish a utilization system for users to measure the nuclear data at the PNF. To do this, we made manuals for the accelerator operation and the data acquisition system. We also made an application form to apply for users to measure the nuclear data in both domestic and abroad. The main object of the Pohang Neutron Facility is to measure the nuclear data in the neutron energy region from thermal neutron to few hundreds of eV. In addition to neutron beams produced at the PNF, photon and electron beams are produced in this facility. We thus utilize this facility for other fields, such as test facility for detectors, activation experiments, polarized neutron beam source, and so on. In addition to these, we could use this facility for training students.

  15. Development of the radioisotope production facility for the HANARO

    International Nuclear Information System (INIS)

    Lee, Ji Bok; Wu, J. S.; Baik, S. T.

    1998-06-01

    Hot cell and related facilities were developed in the RI production building of the HANARO. 1. development of concrete H/C and related components 2. development of lead H/C and related components 3. development of the hydraulic transfer system 4. development of radiation monitoring system 5. development of purification system for Co-60 storage pool 6. development of the fire fighting system for H/C 7. development of the experimental equipment. (author). 15 figs

  16. Development of an Android-based Learning Media Application for Visually Impaired Students

    Directory of Open Access Journals (Sweden)

    Nurul Azmi

    2017-06-01

    Full Text Available This research aims to develop the English for Disability (EFORD application, on Android-based learning english media for Visually Impaired students and determine its based this on assessment of matter expert, media expert, special needs teacher and students. The research method adopted in this research is Research and Development (R&D. The development of this application through five phases: (1 Analysis of problems, through observation and interviews. (2 Collecting information as product planning / analysis of the needs of the media as required of blind children. (3 The design phase of products such as the manufacture of flow and storyboard navigation map.(4 Design validation phase form of an expert assessment of the media is developed. (5 testing products phase, such as assessment of the application by blind students. The results of this research is EFORD application which is feasible to be used as English learning media for visual impairment application based on assessment: 1Media expert it's obtained a percentage scored 95%, include for very worthy category, 2Subject matter, expert its obtained percentage scored 75% include for worthy category and 3 Special needs teacher it's obtained a percentage scored 83% include for very worthy category. Upon demonstration, students indicated the positive response of ≥ 70% in each indicator. Therefore English learning media with Android based application English for Disability (EFORD is very feasible to be used as an English learning media especially grammar and speaking English content for students of visual impairment for a number of reasons. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

  17. SPECIFIC FEATURES OF DEVELOPMENT OF ORGANIC PRODUCTS MARKET IN UKRAINE

    Directory of Open Access Journals (Sweden)

    T. Kharchenko

    2013-08-01

    Full Text Available The article is dedicated to the development of new and improvement of existing theoretical and methodological basis of forming and developing the market of organic products, its correspondence to the present-day situation, determination of problems and ways of their solving, introduction in practical activity of Ukrainian enterprises. The main objective of the article is to determine the specific features of forming and developing organic products market in Ukraine, and the perspective directions of its development based on analysis and practice of functioning of such markets in the world. The environmentally sound products market in the world is being analyzed, some information on the countries with the most commodity turnover of organic products, structure of international market of organic products, volumes of sales of organic products in the European countries is provided. As a result of studying the modern trends of economic development the authors reach a conclusion on problems of standard introduction, investigate the European norms and requirements for organic products. The conducted research allows distinguishing the basic features of Ukrainian market of organic products: it quickly grows, which makes it especially appealing for the participants of market relations, however entry into this market requires considerable capital investments and is characterized by high risk; criteria for qualifying products as environmentally sound products are unstructured and unclear. The potential for growth of organic products market in Ukraine is examined.

  18. Product Development in Higher Education Marketing

    Science.gov (United States)

    Durkin, Mark; Howcroft, Barry; Fairless, Craig

    2016-01-01

    Purpose: During the last 20 years or so the changing environment in which universities operate has meant that commensurately more emphasis has been placed on marketing principles. In light of this emphasis, it is perhaps a little surprising that relatively little attention has been directed towards the processes by which universities develop their…

  19. Workforce Development, Higher Education and Productive Systems

    Science.gov (United States)

    Hordern, Jim

    2014-01-01

    Workforce development partnerships between higher education institutions and employers involve distinctive social and technical dynamics that differ from dominant higher education practices in the UK. The New Labour government encouraged such partnerships in England, including through the use of funding that aimed to stimulate reform to…

  20. Environmental improvement through product development - in Japanese

    DEFF Research Database (Denmark)

    McAloone, Tim C.; Bey, Niki

    Companies in Denmark and abroad are working increasingly to reduce human impacts on the environment and nature. At the same time there must still be a large focus on the creation of value for customers and consumers. This development gives rise to a huge potential for Danish companies, to create ...... Environmental Protection Agency’s company funding scheme. We hope you will be inspired!...

  1. Supporting Law Students' Skills Development Online--A Strategy to Improve Skills and Reduce Student Stress?

    Science.gov (United States)

    Hewitt, Anne; Stubbs, Matthew

    2017-01-01

    Law students internationally suffer from a high level of psychological distress compared with the general and student populations, and anecdotal evidence suggests that students developing skills without adequate support experience significant stress and anxiety. This article considers an initiative at one Australian law school to develop a…

  2. Designer-made meat and dairy products: Consumer-led product development

    DEFF Research Database (Denmark)

    Grunert, Klaus G.; Valli, Carlotta

    2001-01-01

    targeting these segments were derived and tested with consumers from these segments. Results show considerable potential for the development of food products which are differentiated in a consumer-based way. The paper closes with a step-model for consumer-led product development adapted to the current state...... of branding and differentiation in the product category.......Consumers differ in the kind of qualities they expect from food products, and they also differ in the way they infer quality from the product information available. Nevertheless, much product innovation in the food sector is still not geared towards specific consumer segments. This is especially...

  3. Designer made meat and dairy products: Consumer-led product development

    DEFF Research Database (Denmark)

    Grunert, Klaus G.; Valli, Carlotta

    targeting these segments were derived and tested with consumers from these segments. Results show considerable potential for the development of food products which are differentiated in a consumer-based way. The paper closes with a step-model for consumer-led product development adapted to the current state...... of branding and differentiation in the product category.......Consumers differ in the kind of qualities they expect from food products, and they also differ in the way they infer quality from the product information available. Nevertheless, much product innovation in the food sector is still not geared towards specific consumer segments. This is especially...

  4. Developing engineering processes through integrated modelling of product and process

    DEFF Research Database (Denmark)

    Nielsen, Jeppe Bjerrum; Hvam, Lars

    2012-01-01

    This article aims at developing an operational tool for integrated modelling of product assortments and engineering processes in companies making customer specific products. Integrating a product model in the design of engineering processes will provide a deeper understanding of the engineering...... activities as well as insight into how product features affect the engineering processes. The article suggests possible ways of integrating models of products with models of engineering processes. The models have been tested and further developed in an action research study carried out in collaboration...... with a major international engineering company....

  5. Developing Curriculum to Help Students Explore the Geosciences' Cultural Relevance

    Science.gov (United States)

    Miller, G.; Schoof, J. T.; Therrell, M. D.

    2011-12-01

    groups, a content test, an epistemology survey (with think-aloud interviews that also served for cognitive testing purposes), classroom observations, student work, and tracking of student navigation through the digital reader. Overall, the impact this curriculum had on students' affective and academic learning varied; however, the instructional supports we developed to temper challenge with instructional support appear to have had a positive impact on student learning. Analysis of data illustrates how these supports improved their comprehension of multiple, and sometimes conflicting sources. Student feedback from focus groups and interviews also indicate that using a social science lens to learn about concepts such as urban heat island was engaging. In terms of students' understanding of the nature of knowledge in the sciences, the epistemology survey and interview seem to indicate that students lack a complex understanding of continuity and change in scientific knowledge. Further, participants appeared to have many misconceptions about scientific inquiry. As a result, we are currently developing a similar curriculum for a lab-based geography course, GEOG104: Weather, Climate, and Society.

  6. Development of anti-counterfeit consumer product authentication system

    Directory of Open Access Journals (Sweden)

    Olena V. Narimanova

    2015-06-01

    Full Text Available Aim of the research is to develop an anti-counterfeit consumer product authentication system. The main requirements for this system are formulated, the choice of method of consumer product authentication is substantiated. The scheme of anti-counterfeit consumer product authentication system is developed basing on previously proposed method of checking the QR-code integrity and authenticity. The proposed within the system consumer product authentication technology is simple, economical for implementation, does not require the external changes of product packaging, does not affect existing production process. The technology can be recommended for the use to private businesses and government institutions that are interested in the security of their products from counterfeiting, as well as tracking and removing from circulation the counterfeit consumer products.

  7. Empowering High School Students in Scientific Careers: Developing Statewide Partnerships

    Science.gov (United States)

    Aguilar, C.; Swartz, D.

    2008-05-01

    Center for Multiscale Modeling of Atmospheric Processes (CMMAP) is a National Science Foundation Science and Technology Center focused on improving the representation of cloud processes in climate models. The Center is divided into three sections including Knowledge Transfer, Research, and Education and Diversity. The Science Education and Diversity mission is to educate and train people with diverse backgrounds in Climate and Earth System Science by enhancing teaching and learning and disseminating science results through multiple media. CMMAP is partnering with two local school districts to host an annual global climate conferences for high school students. The 2008 Colorado Global Climate Conference seeks "To educate students on global and local climate issues and empower them to se their knowledge." The conference is sponsored by CMMAP, The Governor's Energy Office, Poudre School District, Thompson School District, Clif Bar, and Ben and Jerry's Scoop Shop of Fort Collins. The conference seeks to inspire students to pursue future education and careers in science fields. Following an opening welcome from the Governor's Energy Office, Keynote Piers Sellers will discuss his experiences as an atmospheric scientist and NASA astronaut. Students will then attend 3 out of 16 breakout sessions including such sessions as "Hot poems, Cool Paintings, and the treasures of Antiquity of Climate Change", "Mitigation vs Adaptation", "Bigfoot Walks(What Size is our carbon footprint?)" "The Wedges: Reduc ing Carbon Emissions", and "We the People: Climate and Culture of Climate Change" to name a few. Using The Governor's High School Conference on the Environment sponsored by the Wisconsin Center for Environmental Education as a model we are developing statewide partnerships to bring high school students together to look at global climate issues that will impact their future and of which they can be part of the solution through their education and career paths. In addition to

  8. Awareness and Cognitive Load Levels of Teacher Candidates towards Student Products Made by Digital Storytelling

    Science.gov (United States)

    Kilic, Figen

    2014-01-01

    The purpose of this research is to assess the student products created by digital storytelling, and to determine the awareness towards learning the topic and the cognitive loads of students during the process. Research was performed with a total of 52 teacher candidates attending 2nd class at "Classroom Teacher" department of Mersin…

  9. Electronic outlining as a writing strategy: Effects on students' writing products, mental effort and writing process

    NARCIS (Netherlands)

    De Smet, Milou; Brand-Gruwel, Saskia; Leijten, Mariëlle; Kirschner, Paul A.

    2018-01-01

    This study addresses to what extent and how electronic outlining enhances students' writing performance. To this end, the focus of this study is not only on students' final writing products but also on the organisation of the writing process (i.e., planning, translating, and reviewing) and perceived

  10. Urban and Rural High School Students' Perspectives of Productive Peer Culture for Mathematics Learning

    Science.gov (United States)

    Grant, Melva R.

    2014-01-01

    The purpose of this study was to determine students' perspectives about productive peer culture (PPC) in general and for mathematics learning. The urban and rural high school students in this study have participated for at least one year in either an Algebra Project Cohort Model (APCM) for daily mathematics instruction and/or worked as mathematics…

  11. GCSE Students' Attitudes to Dissection and Using Animals in Research and Product Testing.

    Science.gov (United States)

    Lock, Roger

    1995-01-01

    Questionnaires from students passing the General Certificate of Secondary Education (GCSE) that explored attitudes to dissection and using animals in product testing administered to (n=469) students ages 14-15 showed a high level of support for peers who object to dissection, although objectors are likely to be met with derogatory comments,…

  12. Dissociative Experiences, Creative Imagination, and Artistic Production in Students of Fine Arts

    Science.gov (United States)

    Perez-Fabello, Maria Jose; Campos, Alfredo

    2011-01-01

    The current research was designed to assess the influence of dissociative experiences and creative imagination on the artistic production of Fine Arts students of the University of Vigo (Spain). The sample consisted of 81 students who were administered the Creative Imagination Scale and The Dissociative Experiences Scale. To measure artistic…

  13. The value of information updating in new product development

    CERN Document Server

    Artmann, Christian

    2009-01-01

    This work shows how managing uncertainty in new product development can be improved by conducting an information update during the development process. The book details the comprehensive model needed to perform that information update.

  14. Risk management of new product development process

    OpenAIRE

    Aleixo, Gonçalo Granja

    2009-01-01

    Dissertation submitted to Faculdade de Ciências e Tecnologia of Universidade Nova de Lisboa for the achievement of Integrated Master´s degree in Industrial Management Engineering Winners in today´s global changing environment, are those who continuously pursuit innovations in order to guarantee their sustainability. If in the presence of a certain environment many enterprises makes enormous mistakes, in an uncertain environment as the development of innovations, these mistakes will be mult...

  15. Matching food service products to consumer demands through product development alliances and modularisation

    DEFF Research Database (Denmark)

    Olsen, Johanne Rønnow

    2009-01-01

    of product development managers (with the main themes food trends, meal solutions and product development alliances), as well as data from sensory studies of interactions between meal components. Apart from the quality cycle mentioned above, the research has generated the tools listed below to be applied......, more specifically, meal solutions. The results of this research contribute to the knowledge base on product development in the food industry, mainly regarding quality, product development alliances and modularisation,and fill several gaps in the literature. Future research should focus on further...... in the composition of meal solutions and, therefore cannot control all processing steps and interactions with other meal components. In this project, it is proposed that cooperation between food producers on product development (product development alliances) in relation to meal solutions can improve the quality...

  16. Product Development and Commercialization of Diagnostic or Life Science Products for Scientists and Researchers.

    Science.gov (United States)

    Alonso, Meghan M

    2017-01-01

    Commercializing a diagnostic or life science product often encompasses different goals than that of research and grant funding. There are several necessary steps, and a strategy needs to be well defined in order to be successful. Product development requires input from and between various groups within a company and, for academia, outside entities. The product development stakeholder groups/entities are research, marketing, development, regulatory, manufacturing, clinical, safety/efficacy, and quality. After initial research and development, much of the work in product development can be outsourced or jointly created using public-private partnerships. This chapter serves as an overview of the product development process and provides a guide to best define a product strategy.

  17. Development of glass ceramics for the incorporation of fission products

    International Nuclear Information System (INIS)

    De, A.K.; Luckscheiter, B.; Lutze, W.; Malow, G.; Schiewer, E.

    1976-01-01

    Spontaneous devitrification of fission-product-containing borosilicate glasses can be avoided by controlled crystallization after melting. Glass ceramics have been developed from a vitrified simulated waste and further improvement of product properties was achieved. In particular perovskite, h-celsian, diopside and eucryptite glass ceramics were prepared. These contained leach resistant host phases which exhibited considerable enrichment of long-lived fission products. All products showed increased impact resistance, but the thermal expansion was only slightly improved

  18. Food production in developing countries - the role of plant biotechnology

    OpenAIRE

    D. I. Ferreira

    1995-01-01

    The world is facing major problems with regard to food production. Agricultural land suffers from various conditions which make it less efficient for crop production while the rapid population growth, especially in developing countries, raises concern for sustainable food production. The Green Revolution has failed to secure sustainable food production and it is hoped that biotechnology will facilitate the transition to more sustainable agriculture. Excellent progress has been made with b...

  19. Genetic Algorithms for Development of New Financial Products

    Directory of Open Access Journals (Sweden)

    Eder Oliveira Abensur

    2007-06-01

    Full Text Available New Product Development (NPD is recognized as a fundamental activity that has a relevant impact on the performance of companies. Despite the relevance of the financial market there is a lack of work on new financial product development. The aim of this research is to propose the use of Genetic Algorithms (GA as an alternative procedure for evaluating the most favorable combination of variables for the product launch. The paper focuses on: (i determining the essential variables of the financial product studied (investment fund; (ii determining how to evaluate the success of a new investment fund launch and (iii how GA can be applied to the financial product development problem. The proposed framework was tested using 4 years of real data from the Brazilian financial market and the results suggest that this is an innovative development methodology and useful for designing complex financial products with many attributes.

  20. The Student's Scientific Attitude and Creativity of Product in Environmental Issues Through Project Based Learning

    OpenAIRE

    Yustina, Yustina; Suwondo, Suwondo

    2015-01-01

    The purpose of this research was to got the information about student's scientific attitude and creativity of product and correlation both of it in enviromental issues through project based learning. This research was conducted from January to June 2015. Sample in this research were 34 students of 2014 grade in FKIP Biologi UR used parameters were (1) scientific attitude with 4 indicators (curiosity, cooperative, carefulness and discipline); (2) creativity of product. Observation instrument m...