Sheath waves, non collisional dampings
International Nuclear Information System (INIS)
Marec, Jean Lucien Ernest
1974-01-01
When a metallic conductor is inserted into an ionised gas, an area of electron depletion is formed between the conductor and the plasma: the ionic sheath. Moreover, if the conductor is excited by an electric field, this ionic sheath plays an important role with respect to microwave properties. In this research thesis, the author addresses the range of frequencies smaller than the plasma frequency, and reports the study of resonance phenomena. After a presentation of the problem through a bibliographical study, the author recalls general characteristics of sheath wave propagation and of sheath resonances, and discusses the validity of different hypotheses (for example and among others, electrostatic approximations, cold plasma). Then, the author more particularly addresses theoretical problems related to non collisional dampings: brief bibliographical study, detailed presentation and description of the theoretical model, damping calculation methods. The author then justifies the design and performance of an experiment, indicates measurement methods used to determine plasma characteristics as well as other magnitudes which allow the description of mechanisms of propagation and damping of sheath waves. Experimental results are finally presented with respect to various parameters. The author discusses to which extent the chosen theoretical model is satisfying [fr
Collisional damping for ion temperature gradient mode driven zonal flow
International Nuclear Information System (INIS)
Xiao Yong; Catto, Peter J.; Molvig, Kim
2007-01-01
Zonal flow helps reduce and control the level of ion temperature gradient turbulence in a tokamak. The collisional damping of zonal flow has been estimated by Hinton and Rosenbluth (HR) in the large radial wavelength limit. Their calculation shows that the damping of zonal flow is closely related to the frequency response of neoclassical polarization of the plasma. Based on a variational principle, HR calculated the neoclassical polarization in the low and high collisionality limits. A new approach, based on an eigenfunction expansion of the collision operator, is employed to evaluate the neoclassical polarization and the zonal flow residual for arbitrary collisionality. An analytical expression for the temporal behavior of the zonal flow is also given showing that the damping rate tends to be somewhat slower than previously thought. These results are expected to be useful extensions of the original HR collisional work that can provide an effective benchmark for numerical codes for all regimes of collisionality
Collisional damping of giant monopole and quadrupole resonances
International Nuclear Information System (INIS)
Yildirim, S.; Gokalp, A.; Yilmaz, O.; Ayik, S.
2001-01-01
Collisional damping widths of giant monopole and quadrupole excitations for 120 Sn and 208 Pb at zero and finite temperatures are calculated within Thomas-Fermi approximation by employing the microscopic in-medium cross-sections of Li and Machleidt and the phenomenological Skyrme and Gogny forces, and are compared with each other. The results for the collisional widths of giant monopole and quadrupole vibrations at zero temperature as a function of the mass number show that the collisional damping of giant monopole vibrations accounts for about 30 - 40% of the observed widths at zero temperature, while for giant quadrupole vibrations it accounts for only 20 - 30% of the observed widths at zero temperature. (orig.)
Thermal equilibrium in strongly damped collisions
International Nuclear Information System (INIS)
Samaddar, S.K.; De, J.N.; Krishan, K.
1985-01-01
Energy division between colliding nuclei in damped collisions is studied in the statistical nucleon exchange model. The reactions 56 Fe+ 165 Ho and 56 Fe+ 238 U at incident energy of 465 MeV are considered for this purpose. It is found that the excitation energy is approximately equally shared between the nuclei for the peripheral collisions and the systems slowly approach equilibrium for more central collisions. This is in conformity with the recent experimental observations. The calculated variances of the charge distributions are found to depend appreciably on the temperature and are in very good agreement with the experimental data
International Nuclear Information System (INIS)
Diem, S. J.; Caughman, J. B.; Taylor, G.; Efthimion, P. C.; Kugel, H.; LeBlanc, B. P.; Phillips, C. K.; Preinhaelter, J.; Urban, J.; Sabbagh, S. A.
2009-01-01
The first experimental verification of electron Bernstein wave (EBW) collisional damping, and its mitigation by evaporated Li conditioning, in an overdense spherical-tokamak plasma has been observed in the National Spherical Torus Experiment (NSTX). Initial measurements of EBW emission, coupled from NSTX plasmas via double-mode conversion to O-mode waves, exhibited <10% transmission efficiencies. Simulations show 80% of the EBW energy is dissipated by collisions in the edge plasma. Li conditioning reduced the edge collision frequency by a factor of 3 and increased the fundamental EBW transmission to 60%.
Nonlinear damping of drift waves by strong flow curvature
International Nuclear Information System (INIS)
Sidikman, K.L.; Carreras, B.A.; Garcia, L.; Diamond, P.H.
1993-01-01
A single-equation model has been used to study the effect of a fixed poloidal flow (V 0 ) on turbulent drift waves. The electron dynamics come from a laminar kinetic equation in the dissipative trapped-electron regime. In the past, the authors have assumed that the mode frequency is close to the drift-wave frequency. Trapped-electron density fluctuations are then related to potential fluctuations by an open-quotes iδclose quotes term. Flow shear (V 0 ') and curvature (V 0 double-prime) both have a stabilizing effect on linear modes for this open-quotes iδclose quotes model. However, in the nonlinear regime, single-helicity effects inhibit the flow damping. Neither V 0 ' nor V 0 double-prime produces a nonlinear damping effect. The above assumption on the frequency can be relaxed by including the electron time-response in the linear part of the evolution. In this time-dependent model, instability drive due to trapped electrons is reduced when mode frequency is greater than drift-wave frequency. Since V 0 double-prime produces such a frequency shift, its linear effect is enhanced. There is also nonlinear damping, since single-helicity effects do not eliminate the shift. Renormalized theory for this model predicts nonlinear stability for sufficiently large curvature. Single-helicity calculations have already shown nonlinear damping, and this strong V 0 double-prime regime is being explored. In the theory, the Gaussian shape of the nonlinear diffusivity is expanded to obtain a quadratic potential. The implications of this assumption will be tested by solving the full renormalized equation using a shooting method
Negative mobility of a Brownian particle: Strong damping regime
Słapik, A.; Łuczka, J.; Spiechowicz, J.
2018-02-01
We study impact of inertia on directed transport of a Brownian particle under non-equilibrium conditions: the particle moves in a one-dimensional periodic and symmetric potential, is driven by both an unbiased time-periodic force and a constant force, and is coupled to a thermostat of temperature T. Within selected parameter regimes this system exhibits negative mobility, which means that the particle moves in the direction opposite to the direction of the constant force. It is known that in such a setup the inertial term is essential for the emergence of negative mobility and it cannot be detected in the limiting case of overdamped dynamics. We analyse inertial effects and show that negative mobility can be observed even in the strong damping regime. We determine the optimal dimensionless mass for the presence of negative mobility and reveal three mechanisms standing behind this anomaly: deterministic chaotic, thermal noise induced and deterministic non-chaotic. The last origin has never been reported. It may provide guidance to the possibility of observation of negative mobility for strongly damped dynamics which is of fundamental importance from the point of view of biological systems, all of which in situ operate in fluctuating environments.
Energy Technology Data Exchange (ETDEWEB)
Sperling, P. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Fletcher, L. B. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Chung, H. -K. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Gamboa, E. J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Lee, H. J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Omarbakiyeva, Y. [International IT Univ., Almaty (Kazakhstan); Univ. Rostock (Germany); Reinholz, H. [Univ. Rostock (Germany);
2016-03-29
We measure the highly-resolved inelastic x-ray scattering spectrum of isochorically ultrafast heated aluminum. In the x-ray forward scattering spectra the electron temperature could be measured from the down- and upshifted plasmon, where the electron density of ne = 1:8 1023 cm^{3} is known a priori. We have studied the plasmon damping by applying electron-particle collision models beyond the Born approximation determining the electrical conductivity of warm dense aluminum.
Nontrivial effects of high-frequency excitation for strongly damped mechanical systems
DEFF Research Database (Denmark)
Fidlin, Alexander; Thomsen, Jon Juel
Some nontrivial effects are investigated, which can occur if strongly damped mechanical systems are subjected to strong high-frequency (HF) excitation. The main result is a theoretical prediction, supported by numerical simulation, that for such systems the (quasi-)equilibrium states can change...... that can be substantial (depending on the strength of the HF excitation) for finite values of the damping. The analysis is focused on the differences between the classic results for weakly damped systems, and new effects for which the strong damping terms are responsible. The analysis is based...... on a slightly modified averaging technique, and includes an elementary example of an elliptically excited pendulum for illustration, alongside with a generalization to a broader class of strongly damped dynamical systems with HF excitation. As an application example, the nontrivial behavior of a classical...
Nontrivial effects of high-frequency excitation for strongly damped mechanical systems
DEFF Research Database (Denmark)
Fidlin, Alexander; Thomsen, Jon Juel
2008-01-01
Some non-trivial effects are investigated, which can occur if strongly damped mechanical systems are subjected to strong high-frequency (HF) excitation. The main result is a theoretical prediction, supported by numerical simulation, that for such systems the (quasi-)equilibrium states can change...... that can be substantial depending on the strength of the HF excitation) for finite values of the damping. The analysis is focused on the differences between the classic results for weakly damped systems, and new effects for which the strong damping terms are responsible. The analysis is based on a slightly...... modified averaging technique, and includes an elementary example of an elliptically excited pendulum for illustration, alongside with a generalization to a broader class of strongly damped dynamical systems with HF excitation. As an application example, the nontrivial behavior of a classical optimally...
Is thermal equilibrium in strongly damped collisions only apparent?
International Nuclear Information System (INIS)
Wilczynski, J.; Siwek-Wilczynska, K.
1990-01-01
The dependence of excitation-energy sharing on the direction of the net transfer of mass, observed by Viola and co-workers, is interpreted in terms of the participant-spectator model of Wilczynski and Wilschut. It is demonstrated that the division of the excitation energy in fully damped collisions (proportional to the mass numbers of the fragments) is a natural consequence of the participant-spectator kinematics and therefore it does not necessarily imply temperature equilibration prior to scission
Damped nonlinear Schrodinger equation
International Nuclear Information System (INIS)
Nicholson, D.R.; Goldman, M.V.
1976-01-01
High frequency electrostatic plasma oscillations described by the nonlinear Schrodinger equation in the presence of damping, collisional or Landau, are considered. At early times, Landau damping of an initial soliton profile results in a broader, but smaller amplitude soliton, while collisional damping reduces the soliton size everywhere; soliton speeds at early times are unchanged by either kind of damping. For collisional damping, soliton speeds are unchanged for all time
Modified multiple time scale method for solving strongly nonlinear damped forced vibration systems
Razzak, M. A.; Alam, M. Z.; Sharif, M. N.
2018-03-01
In this paper, modified multiple time scale (MTS) method is employed to solve strongly nonlinear forced vibration systems. The first-order approximation is only considered in order to avoid complexicity. The formulations and the determination of the solution procedure are very easy and straightforward. The classical multiple time scale (MS) and multiple scales Lindstedt-Poincare method (MSLP) do not give desire result for the strongly damped forced vibration systems with strong damping effects. The main aim of this paper is to remove these limitations. Two examples are considered to illustrate the effectiveness and convenience of the present procedure. The approximate external frequencies and the corresponding approximate solutions are determined by the present method. The results give good coincidence with corresponding numerical solution (considered to be exact) and also provide better result than other existing results. For weak nonlinearities with weak damping effect, the absolute relative error measures (first-order approximate external frequency) in this paper is only 0.07% when amplitude A = 1.5 , while the relative error gives MSLP method is surprisingly 28.81%. Furthermore, for strong nonlinearities with strong damping effect, the absolute relative error found in this article is only 0.02%, whereas the relative error obtained by MSLP method is 24.18%. Therefore, the present method is not only valid for weakly nonlinear damped forced systems, but also gives better result for strongly nonlinear systems with both small and strong damping effect.
Blow-Up of Solutions for a Class of Sixth Order Nonlinear Strongly Damped Wave Equation
Directory of Open Access Journals (Sweden)
Huafei Di
2014-01-01
Full Text Available We consider the blow-up phenomenon of sixth order nonlinear strongly damped wave equation. By using the concavity method, we prove a finite time blow-up result under assumptions on the nonlinear term and the initial data.
Global periodic attractor for strongly damped wave equations with time-periodic driving force
International Nuclear Information System (INIS)
Li Hongyan; Zhou Shengfan; Yin Fuqi
2004-01-01
In this paper, we consider the existence of a global periodic attractor for a strongly damped nonlinear wave equation with time-periodic driving force under homogeneous Dirichlet boundary condition. It is proved that in certain parameter region, for arbitrary time-periodic driving force, the system has a unique periodic solution attracting any bounded set exponentially. This implies that the system behaves exactly as a one-dimensional system. We mention, in particular, that the obtained result can be used to prove the existence of global periodic attractor of the usual damped and driven wave equations
Chen, D
The $\\textbf{DA}$rk $\\textbf{M}$atter $\\textbf{P}$article $\\textbf{E}$xplorer (DAMPE) experiment is a high-energy astroparticle physics satellite mission to search for Dark Matter signatures in space, study the cosmic ray spectrum and composition up to 100 TeV, and perform high-energy gamma astronomy. The launch is planned for end 2015, initially for 3 years, to compliment existing space missions FERMI, AMS and CALET.
Emori, Satoru; Gray, Benjamin A; Jeon, Hyung-Min; Peoples, Joseph; Schmitt, Maxwell; Mahalingam, Krishnamurthy; Hill, Madelyn; McConney, Michael E; Gray, Matthew T; Alaan, Urusa S; Bornstein, Alexander C; Shafer, Padraic; N'Diaye, Alpha T; Arenholz, Elke; Haugstad, Greg; Meng, Keng-Yuan; Yang, Fengyuan; Li, Dongyao; Mahat, Sushant; Cahill, David G; Dhagat, Pallavi; Jander, Albrecht; Sun, Nian X; Suzuki, Yuri; Howe, Brandon M
2017-09-01
Low-loss magnetization dynamics and strong magnetoelastic coupling are generally mutually exclusive properties due to opposing dependencies on spin-orbit interactions. So far, the lack of low-damping, magnetostrictive ferrite films has hindered the development of power-efficient magnetoelectric and acoustic spintronic devices. Here, magnetically soft epitaxial spinel NiZnAl-ferrite thin films with an unusually low Gilbert damping parameter (ferrite. At the same time, the coherently strained film structure suppresses extrinsic damping, enables soft magnetic behavior, and generates large easy-plane magnetoelastic anisotropy. These findings provide a foundation for a new class of low-loss, magnetoelastic thin film materials that are promising for spin-mechanical devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Collisional ionization of Na by HBr in weak to strong electric fields
International Nuclear Information System (INIS)
Safinya, K.A.; Gallagher, T.F.; Sandner, W.; Gounand, F.
1985-01-01
We report the effect of static electric fields on the collisional ionization of highly excited sodium atoms by HBr. The binding energy dependence of the collisional ionization cross section is measured at zero field and in static electric fields up to that point at which the atom field ionizes. The applied electric field lowers the ionization threshold of the atom from its zero field value. Therefore an atom near the ionization threshold in an electric field is of smaller size than a free field atom with the same binding energy. Thus measuring the binding energy dependence of the cross section at different values of the electric field allows us to study the effects of the physical size of the atom on the cross section. The effect of the electric field was to lower the measured ionization cross section. However, the binding energy dependence of the cross section remains unchanged at the level of our measurement accuracy. The measured cross sections are larger for larger atoms, exhibit a drop with increasing binding energy characteristic of rotational to electronic excitation transfer, and are of order 10 -12 --10 -11 cm 2 . A simple calculation based on dipole (J→ J-1) excitation transfer from the molecule to the atom predicts, with good agreement, the binding energy dependence of the cross section. The electric field dependence of the data however, is not shown in the theory
Damping at positive frequencies in the limit J⊥-->0 in the strongly correlated Hubbard model
Mohan, Minette M.
1992-08-01
I show damping in the two-dimensional strongly correlated Hubbard model within the retraceable-path approximation, using an expansion around dominant poles for the self-energy. The damping half-width ~J2/3z occurs only at positive frequencies ω>5/2Jz, the excitation energy of a pure ``string'' state of length one, where Jz is the Ising part of the superexchange interaction, and occurs even in the absence of spin-flip terms ~J⊥ in contrast to other theoretical treatments. The dispersion relation for both damped and undamped peaks near the upper band edge is found and is shown to have lost the simple J2/3z dependence characteristic of the peaks near the lower band edge. The position of the first three peaks near the upper band edge agrees well with numerical simulations on the t-J model. The weight of the undamped peaks near the upper band edge is ~J4/3z, contrasting with Jz for the weight near the lower band edge.
Nucleon exchange as a mechanism for strongly damped heavy ion collisions
International Nuclear Information System (INIS)
Jain, A.K.; Sarma, N.
1978-01-01
The strongly damped collisions of two heavy ions are examined in a semi-classical model where nucleons migrating across a boundary between the nuclei are captured by the other nucleus. The density variation of nucleons is taken to be the two-parameter Fermi distribution and the Thomas-Fermi model is invoked to obtain their momentum distribution. The mass exchanged during collisions, the net mass transfer and the energy lost to internal excitation are calculated as a function of the impact parameter. The angle of deep inelastic scattering is computed by correcting the elastic scattering deflection function. (Auth.)
Energy Technology Data Exchange (ETDEWEB)
Prajapati, R. P., E-mail: prajapati-iter@yahoo.co.in; Bhakta, S. [Department of Pure and Applied Physics, Guru Ghasidas Central University, Bilaspur-495009 (C.G.) (India); Chhajlani, R. K. [Retired from School of Studies in Physics, Vikram University, Ujjain-456010 (M.P.) (India)
2016-05-15
The influence of dust-neutral collisions, polarization force, and electron radiative condensation is analysed on the Jeans (gravitational) instability of partially ionized strongly coupled dusty plasma (SCDP) using linear perturbation (normal mode) analysis. The Boltzmann distributed ions, dynamics of inertialess electrons, charged dust and neutral particles are considered. Using the plane wave solutions, a general dispersion relation is derived which is modified due to the presence of dust-neutral collisions, strong coupling effect, polarization force, electron radiative condensation, and Jeans dust/neutral frequencies. In the long wavelength perturbations, the Jeans instability criterion depends upon strong coupling effect, polarization interaction parameter, and thermal loss, but it is independent of dust-neutral collision frequency. The stability of the considered configuration is analysed using the Routh–Hurwitz criterion. The growth rates of Jeans instability are illustrated, and stabilizing influence of viscoelasticity and dust-neutral collision frequency while destabilizing effect of electron radiative condensation, polarization force, and Jeans dust-neutral frequency ratio is observed. This work is applied to understand the gravitational collapse of SCDP with dust-neutral collisions.
Time evolution of mass flows in a collisional tokamak
International Nuclear Information System (INIS)
Hassam, A.B.; Kulsrud, R.M.
1978-04-01
The time evolution, due to dissipative processes, of an initial pattern of poloidal and toroidal mass flows in a tokamak is considered. The calculation is applicable to a collisional, low β, axisymmetric tokamak of arbitrary minor cross section. Time rates of change of poloidal flows which are subsonic but larger than the diamagnetic speed are given according to the magnitude of the flow and the collisionality of the plasma. Over most of parameter space for typical tokamaks, the poloidal rotation is strongly damped by magnetic pumping at the rate (l/qR) 2 ν/sub ii/, where l is the mean free path, qR the ''connection length,'' and ν/sub ii/ the ion-ion collision frequency. At higher speeds, even stronger damping is effected by electron thermal conduction. The toroidal rotation is determined largely by the conservation of toroidal angular momentum. A heuristic explanation of the damping due to magnetic pumping is given
Geroyannis, V. S.; Tzelati, E. E.; Karageorgopoulos, V. G.
In this paper, we compute eigenfrequencies of strongly damped normal modes arising from the coupling of the nonradial oscillations of a neutron star to the oscillations of the space-time metric, so-called “w-modes”, by integrating all involved differential equations in the complex plane. Regarding the interior of the star, we use the so-called “complex-plane strategy”. Specifically, we integrate the differential equations of the nonradial fluid oscillations of a general-relativistic polytropic model, simulating the star, along a straight-line contour placed parallel to the real axis and at small imaginary distance from it, thus avoiding a singularity at the stellar center. Regarding the exterior of the star, we use a method proposed by Andersson, Kokkotas and Schutz, following a slightly different terminating procedure. Specifically, (i) we integrate the equations along a straight-line contour lying parallel to the so-called “anti-Stokes lines”, on which the exponential divergence of the solution is drastically suppressed, so that the outgoing and ingoing waves become comparable; and (ii) we carry out one final integration up to a “common reference point”, thus comparing all results at this point. We verify the reliability and accuracy of the method by comparing our numerical results to corresponding ones appearing in the bibliography.
Howes, Gregory G.; McCubbin, Andrew J.; Klein, Kristopher G.
2018-02-01
Understanding the removal of energy from turbulent fluctuations in a magnetized plasma and the consequent energization of the constituent plasma particles is a major goal of heliophysics and astrophysics. Previous work has shown that nonlinear interactions among counterpropagating Alfvén waves - or Alfvén wave collisions - are the fundamental building block of astrophysical plasma turbulence and naturally generate current sheets in the strongly nonlinear limit. A nonlinear gyrokinetic simulation of a strong Alfvén wave collision is used to examine the damping of the electromagnetic fluctuations and the associated energization of particles that occurs in self-consistently generated current sheets. A simple model explains the flow of energy due to the collisionless damping and the associated particle energization, as well as the subsequent thermalization of the particle energy by collisions. The net particle energization by the parallel electric field is shown to be spatially localized, and the nonlinear evolution is essential in enabling spatial non-uniformity. Using the recently developed field-particle correlation technique, we show that particles resonant with the Alfvén waves in the simulation dominate the energy transfer, demonstrating conclusively that Landau damping plays a key role in the spatially localized damping of the electromagnetic fluctuations and consequent energization of the particles in this strongly nonlinear simulation.
VizieR Online Data Catalog: Extremely strong damped Lyman-α systems (Noterdaeme+, 2014)
Noterdaeme, P.; Petitjean, P.; Paris, I.; Cai, Z.; Finley, H.; Ge, J.; Pieri, M. M.; York, D. G.
2014-07-01
We present a study of ~100 high redshift (z ~2-4) extremely strong damped Lyman-α systems (ESDLA, with N(HI)>=0.5x1022cm-2) detected in quasar spectra from the Baryon Oscillation Spectroscopic Survey (BOSS) of the Sloan Digital Sky Survey (SDSS-III) Data Release 11. We study the neutral hydrogen, metal, and dust content of this elusive population of absorbers and confirm our previous finding that the high column density end of the N(HI) frequency distribution has a relatively shallow slope with power-law index -3.6, similar to what is seen from 21-cm maps in nearby galaxies. The stacked absorption spectrum indicates a typical metallicity ~1/20th solar, similar to the mean metallicity of the overall DLA population. The relatively small velocity extent of the low-ionisation lines suggests that ESDLAs do not arise from large-scale flows of neutral gas. The high column densities involved are in turn more similar to what is seen in DLAs associated with gamma-ray burst afterglows (GRB-DLAs), which are known to occur close to star-forming regions. This indicates that ESDLAs arise from a line of sight passing at very small impact parameters from the host galaxy, as observed in nearby galaxies. This is also supported by simple theoretical considerations and recent high-z hydrodynamical simulations. We strongly substantiate this picture by the first statistical detection of Lyα emission with =~(0.6+/-0.2)x1042erg/s in the core of ESDLAs (corresponding to about 0.1L* at z~2-3), obtained through stacking the fibre spectra (of radius 1" corresponding to ~8kpc at z~2.5). Statistical errors on the Lyα luminosity are of the order of 0.1x1042erg/s but we caution that the measured Lyα luminosity may be overestimated by ~35% due to sky light residuals and/or FUV emission from the quasar host and that we have neglected flux-calibration uncertainties. We estimate a more conservative uncertainty of 0.2x1042erg/s. The properties of the Lyα line (luminosity distribution, velocity
Kim, Kilyoung; Johnson, Alan M; Powell, Amber L; Mitchell, Deborah G; Sevy, Eric T
2014-12-21
Collisional energy transfer between vibrational ground state CO2 and highly vibrationally excited monofluorobenzene (MFB) was studied using narrow bandwidth (0.0003 cm(-1)) IR diode laser absorption spectroscopy. Highly vibrationally excited MFB with E' = ∼41,000 cm(-1) was prepared by 248 nm UV excitation followed by rapid radiationless internal conversion to the electronic ground state (S1→S0*). The amount of vibrational energy transferred from hot MFB into rotations and translations of CO2 via collisions was measured by probing the scattered CO2 using the IR diode laser. The absolute state specific energy transfer rate constants and scattering probabilities for single collisions between hot MFB and CO2 were measured and used to determine the energy transfer probability distribution function, P(E,E'), in the large ΔE region. P(E,E') was then fit to a bi-exponential function and extrapolated to the low ΔE region. P(E,E') and the biexponential fit data were used to determine the partitioning between weak and strong collisions as well as investigate molecular properties responsible for large collisional energy transfer events. Fermi's Golden rule was used to model the shape of P(E,E') and identify which donor vibrational motions are primarily responsible for energy transfer. In general, the results suggest that low-frequency MFB vibrational modes are primarily responsible for strong collisions, and govern the shape and magnitude of P(E,E'). Where deviations from this general trend occur, vibrational modes with large negative anharmonicity constants are more efficient energy gateways than modes with similar frequency, while vibrational modes with large positive anharmonicity constants are less efficient at energy transfer than modes of similar frequency.
Malkin, Vladimir; Fisch, Nathaniel
2009-11-01
Currently built powerful soft x-ray sources may be able to access intensities needed for backward Raman amplification (BRA) of x-ray pulses in plasmas. However, high plasma densities, needed to provide enough coupling between the pump and seed x-ray pulsed, cause strong damping of the Langmuir wave that mediates energy transfer from the pump to the seed pulse. Such damping could reduce the coupling, thus making efficient BRA impossible. This work shows that efficient BRA can survive despite the Langmuir wave damping significantly exceeding the linear BRA growth rate. Moreover, the strong Langmuir wave damping can suppress deleterious instabilities of BRA seeded by the thermal noise. This shows that it may be feasible to observe x-ray BRA for the first time soon.
Energy Technology Data Exchange (ETDEWEB)
Wilczynski, J. [Soltan Inst. for Nuclear Studies, Otwock-Swierk (Poland); Siwek-Wilczynska, K. [Warsaw Univ., Inst. of Experimental Physics, Warsaw (Poland); Wilschut, H.W. [Kernfysisch Verneller Instituut, Groningen (Netherlands)
1996-12-31
The neutron multiplicities in non-fusion reactions have been calculated in the frame of classical equation of motion with friction (Lagrange-Rayleigh equations) The calculated data were compared with the reported neutron multiplicities data. The results shown an evidence of the onset of a strong two-body dissipation at unexpected low temperatures, already at about 2 MeV. 3 refs, 1 fig.
Straw Formation and Enhanced Damping of Strong Density Waves in Saturn’s Rings
Stewart, Glen R.
2017-06-01
High resolution Cassini images of strong density waves in Saturn’s rings often show kilometer-scale structures in the wave troughs that are sometimes described as straw-like structures. These structures are likely formed by transient gravitational instabilities within the density wave and have the potential to greatly enhance the local viscous angular momentum transport and thereby limit the maximum amplitude of the density wave. A Hamiltonian theory for density waves has been developed that can describe the rate of local gravitational instabilities in the wave train. The Hamiltonian for single particle motion in the vicinity of an inner Lindblad resonance with a Saturnian satellite can be formulated such that the angle variable conjugate to the radial action is the resonant argument for the resonance. The density wave can then be derived using Hamiltonian perturbation methods to remove the satellite perturbation such that the transformed radial action and conjugate angles include the usual solution for self-gravitating density waves. Local gravitational instabilities in the density wave can now be formulated using a linearized collisionless Boltzmann equation that is expressed in terms of the transformed action-angle variables that contain the density wave solution. The gravitational potential of the linearized perturbation is found to be enhanced by a factor of ten or more in strong density waves, which likely explains the observation of kilometer-scale structures in these waves. The Hamiltonian formalism can also be used to derive an enhanced effective viscosity that results from these straw-like structures.
Damping of electron center-of-mass oscillation in ultracold plasmas
Energy Technology Data Exchange (ETDEWEB)
Chen, Wei-Ting; Witte, Craig; Roberts, Jacob L. [Department of Physics, Colorado State University, Fort Collins, Colorado 80523 (United States)
2016-05-15
Applying a short electric field pulse to an ultracold plasma induces an electron plasma oscillation. This manifests itself as an oscillation of the electron center of mass around the ion center of mass in the ultracold plasma. In general, the oscillation can damp due to either collisionless or collisional mechanisms, or a combination of the both. To investigate the nature of oscillation damping in ultracold plasmas, we developed a molecular dynamics model of the ultracold plasma electrons. Through this model, we found that depending on the neutrality of the ultracold plasma and the size of an applied DC electric field, there are some parameter ranges where the damping is primarily collisional and some primarily collisionless. We conducted experiments to compare the measured damping rate with theory predictions and found them to be in good agreement. Extension of our measurements to different parameter ranges should enable studies for strong-coupling influence on electron-ion collision rates.
Wilczyński, J.; Siwek-Wilczyńska, K.; Wilschut, H. W.
1996-07-01
Nonfusion, fissionlike reactions in collisions of four heavy systems (well below the fusion extra-push energy threshold), for which Hinde and co-workers had measured the prescission neutron multiplicities, have been analyzed in terms of the deterministic dynamic model of Feldmeier coupled to a time-dependent statistical cascade calculation. In order to reproduce the measured prescission multiplicities and the observed (nearly symmetric) mass divisions, the energy dissipation must be dramatically changed with regard to the standard one-body dissipation: In the entrance channel, in the process of forming a composite system, the energy dissipation has to be reduced to at least half of the one-body dissipation strength (kinsmononucleus shape to scission) it must be increased by a factor ranging for the studied reactions from kouts=4 to kouts=12. These results are compared with the temperature dependence of the friction coefficient, recently deduced by Hofman, Back, and Paul from data on the prescission giant dipole resonance emission in fusion-fission reactions. The combined picture of the temperature dependence of the friction coefficient, for both fusion-fission and nonfusion reactions, may indicate the onset of strong two-body dissipation already at a nuclear temperature of about 2 MeV.
Noterdaeme, P.; Petitjean, P.; Pâris, I.; Cai, Z.; Finley, H.; Ge, J.; Pieri, M. M.; York, D. G.
2014-06-01
We present a study of ~100 high redshift (z ~ 2-4) extremely strong damped Lyman-α systems (ESDLA, with N(H i) ≥ 0.5 × 1022cm-2) detected in quasar spectra from the Baryon Oscillation Spectroscopic Survey (BOSS) of the Sloan Digital Sky Survey (SDSS-III) Data Release 11. We study the neutral hydrogen, metal, and dust content of this elusive population of absorbers and confirm our previous finding that the high column density end of the N(H i) frequency distribution has a relatively shallow slope with power-law index -3.6, similar to what is seen from 21-cm maps in nearby galaxies. The stacked absorption spectrum indicates a typical metallicity ~1/20th solar, similar to the mean metallicity of the overall DLA population. The relatively small velocity extent of the low-ionisation lines suggests that ESDLAs do not arise from large-scale flows of neutral gas. The high column densities involved are in turn more similar to what is seen in DLAs associated with gamma-ray burst afterglows (GRB-DLAs), which are known to occur close to star-forming regions. This indicates that ESDLAs arise from a line of sight passing at very small impact parameters from the host galaxy, as observed in nearby galaxies. This is also supported by simple theoretical considerations and recent high-z hydrodynamical simulations. We strongly substantiate this picture by the first statistical detection of Ly α emission with ⟨LESDLA(Ly α)⟩ ≃ (0.6 ± 0.2) × 1042 erg s-1 in the core of ESDLAs (corresponding to about 0.1 L⋆ at z ~ 2-3), obtained through stacking the fibre spectra (of radius 1 ″ corresponding to ~8 kpc at z ~ 2.5). Statistical errors on the Ly α luminosity are of the order of 0.1 × 1042 erg s-1 but we caution that the measured Ly α luminosity may be overestimated by ~35% due to sky light residuals and/or FUV emission from the quasar host and that we have neglected flux-calibration uncertainties. We estimate a more conservative uncertainty of 0.2 × 1042 erg s-1. The
International Nuclear Information System (INIS)
Saikia, P.
1981-01-01
The spectrum of stimulated Brillouin scattering from an inhomogeneous moving laser plasma is analyzed. The damping of acoustic waves and scattered electromagnetic waves is taken into account. Spectra are derived for various scattering angles and for various radii of the laser beam. For all observation angles the center of the spectral line is at an unshifted frequency. As the observation angle increases, the width of the red wing in the spectrum increases. The intensity of the scattered light is very anisotropic
Coherent collisional spin dynamics in optical lattices.
Widera, Artur; Gerbier, Fabrice; Fölling, Simon; Gericke, Tatjana; Mandel, Olaf; Bloch, Immanuel
2005-11-04
We report on the observation of coherent, purely collisionally driven spin dynamics of neutral atoms in an optical lattice. For high lattice depths, atom pairs confined to the same lattice site show weakly damped Rabi-type oscillations between two-particle Zeeman states of equal magnetization, induced by spin-changing collisions. Moreover, measurement of the oscillation frequency allows for precise determination of the spin-changing collisional coupling strengths, which are directly related to fundamental scattering lengths describing interatomic collisions at ultracold temperatures.
Fay, Temple H.
2012-01-01
Quadratic friction involves a discontinuous damping term in equations of motion in order that the frictional force always opposes the direction of the motion. Perhaps for this reason this topic is usually omitted from beginning texts in differential equations and physics. However, quadratic damping is more realistic than viscous damping in many…
Afeyan, Bedros; Hüller, Stefan; Montgomery, David; Moody, John; Froula, Dustin; Hammer, James; Jones, Oggie; Amendt, Peter
2014-10-01
In mid-Z and high-Z plasmas, it is possible to control crossed bean energy transfer (CBET) and subsequently occurring single or multiple beam instabilities such as Stimulated Raman Scattering (SRS) by novel means. These new techniques are inoperative when the ion acoustic waves are in their strong damping limit, such as occurs in low Z plasmas with comparable electron and ion temperatures. For mid-Z plasmas, such as Z = 10, and near the Mach 1 surface, the strong coupling regime (SCR) can be exploited for LPI mitigation. While at higher Z values, it is thermal filamentation in conjunction with nonlocal heat transport that are useful to exploit. In both these settings, the strategy is to induce laser hot spot intensity dependent, and thus spatially dependent, frequency shifts to the ion acoustic waves in the transient response of wave-wave interactions. The latter is achieved by the on-off nature of spike trains of uneven duration and delay, STUD pulses. The least taxing use of STUD pulses is to modulate the beams at the 10 ps time scale and to choose which crossing beams are overlapping in time and which are not. Work supported by a grant from the DOE NNSA-OFES joint program on HEDP
Numerical analysis of nonlinear collisional drift instability
Energy Technology Data Exchange (ETDEWEB)
Nishi-kawa, K.I.; Hatori, T.; Terashima, Y.
1978-04-01
The nonlinear evolution of collisional drift wave instability is studied numerically. Model equations of quasilinear type are used which describe the modification of background density and the amplitude of unstable drift wave. Their solutions are classified according to the value of a parameter (n) which is proportional to the ratio of ion viscous damping to linear growth rate. In the vicinity of marginal stability, the unstable drift waves are shown to be saturated by flattening of the background density. An N decreases further, periodic and later aperiodic solutions are obtained. The wave associated diffusion coefficient is obtained numerically as a function of N and found to be much less than the usual estimate.
Collisional Evolution of Planetesimals
Leinhardt, Zoë Malka
2010-05-01
Over 400 extrasolar planets have been discovered. These planetary systems are very different from our solar system and surprisingly diverse. The large number of planets detected suggests that planet formation is common around main sequence stars. The major problem facing the scientific community with regards to these discoveries is that observations cannot trace the history of planet formation. Observations provide snapshots of the early stages of a protoplanetary gas disk orbiting a young star and the late stages after planetary systems have formed. But the evolution from a young star to a planetary system has not been observed. Thus, the challenge is to connect the early and late stages of planet formation. Planets form from the collisional growth of planetary building blocks, planetesimals. In recent numerical work we found that the resistance of planetesimals to collisional erosion changes dramatically during planet formation. Young planetesimals are weak aggregates that are easily disrupted due to efficient momentum coupling during low-velocity collisions in early phases of collisional evolution. However, as impact speeds increase the same weak planetesimals become dramatically stronger because the shock from a supersonic impact loses energy to deformation and phase changes. Our work identifies a paradox for the early stages of planet formation. Objects in the km-size range are weak and susceptible to collisional disruption. However, this disruption may actually produce large amounts of debris that can be accreted by remaining undisrupted planetesimals allowing growth. As we work to disentangle these sorts of conundrums we can expect to put forward hypotheses for collisional remnants in our solar system - for example, the dwarf planet Haumea and its collisional family. In this talk I will review the current understanding of planetesimal evolution and discuss how future numerical simulations may connect observational snapshots to provide a complete history of
Energy Technology Data Exchange (ETDEWEB)
Schekochihin, A. A.; Cowley, S. C.; Dorland, W.; Hammett, G. W.; Howes, G. G.; Quataert, E.; Tatsuno, T.
2009-04-23
This paper presents a theoretical framework for understanding plasma turbulence in astrophysical plasmas. It is motivated by observations of electromagnetic and density fluctuations in the solar wind, interstellar medium and galaxy clusters, as well as by models of particle heating in accretion disks. All of these plasmas and many others have turbulentmotions at weakly collisional and collisionless scales. The paper focuses on turbulence in a strong mean magnetic field. The key assumptions are that the turbulent fluctuations are small compared to the mean field, spatially anisotropic with respect to it and that their frequency is low compared to the ion cyclotron frequency. The turbulence is assumed to be forced at some system-specific outer scale. The energy injected at this scale has to be dissipated into heat, which ultimately cannot be accomplished without collisions. A kinetic cascade develops that brings the energy to collisional scales both in space and velocity. The nature of the kinetic cascade in various scale ranges depends on the physics of plasma fluctuations that exist there. There are four special scales that separate physically distinct regimes: the electron and ion gyroscales, the mean free path and the electron diffusion scale. In each of the scale ranges separated by these scales, the fully kinetic problem is systematically reduced to a more physically transparent and computationally tractable system of equations, which are derived in a rigorous way. In the "inertial range" above the ion gyroscale, the kinetic cascade separates into two parts: a cascade of Alfvenic fluctuations and a passive cascade of density and magnetic-fieldstrength fluctuations. The former are governed by the Reduced Magnetohydrodynamic (RMHD) equations at both the collisional and collisionless scales; the latter obey a linear kinetic equation along the (moving) field lines associated with the Alfvenic component (in the collisional limit, these compressive fluctuations
International Nuclear Information System (INIS)
Schekochihin, A.A.; Cowley, S.C.; Dorland, W.; Hammett, G.W.; Howes, G.G.; Quataert, E.; Tatsuno, T.
2009-01-01
This paper presents a theoretical framework for understanding plasma turbulence in astrophysical plasmas. It is motivated by observations of electromagnetic and density fluctuations in the solar wind, interstellar medium and galaxy clusters, as well as by models of particle heating in accretion disks. All of these plasmas and many others have turbulent motions at weakly collisional and collisionless scales. The paper focuses on turbulence in a strong mean magnetic field. The key assumptions are that the turbulent fluctuations are small compared to the mean field, spatially anisotropic with respect to it and that their frequency is low compared to the ion cyclotron frequency. The turbulence is assumed to be forced at some system-specific outer scale. The energy injected at this scale has to be dissipated into heat, which ultimately cannot be accomplished without collisions. A kinetic cascade develops that brings the energy to collisional scales both in space and velocity. The nature of the kinetic cascade in various scale ranges depends on the physics of plasma fluctuations that exist there. There are four special scales that separate physically distinct regimes: the electron and ion gyroscales, the mean free path and the electron diffusion scale. In each of the scale ranges separated by these scales, the fully kinetic problem is systematically reduced to a more physically transparent and computationally tractable system of equations, which are derived in a rigorous way. In the 'inertial range' above the ion gyroscale, the kinetic cascade separates into two parts: a cascade of Alfvenic fluctuations and a passive cascade of density and magnetic-field strength fluctuations. The former are governed by the Reduced Magnetohydrodynamic (RMHD) equations at both the collisional and collisionless scales; the latter obey a linear kinetic equation along the (moving) field lines associated with the Alfvenic component (in the collisional limit, these compressive fluctuations
Damped Oscillator with Delta-Kicked Frequency
Manko, O. V.
1996-01-01
Exact solutions of the Schrodinger equation for quantum damped oscillator subject to frequency delta-kick describing squeezed states are obtained. The cases of strong, intermediate, and weak damping are investigated.
Generalized fluid equations for parallel transport in collisional to weakly collisional plasmas
International Nuclear Information System (INIS)
Zawaideh, E.S.
1985-01-01
A new set of two-fluid equations which are valid from collisional to weakly collisional limits are derived. Starting from gyrokinetic equations in flux coordinates with no zeroth order drifts, a set of moment equations describing plasma transport along the field lines of a space and time dependent magnetic field are derived. No restriction on the anisotropy of the ion distribution function is imposed. In the highly collisional limit, these equations reduce to those of Braginskii while in the weakly collisional limit, they are similar to the double adiabatic or Chew, Goldberger, and Low (CGL) equations. The new transport equations are used to study the effects of collisionality, magnetic field structure, and plasma anisotropy on plasma parallel transport. Numerical examples comparing these equations with conventional transport equations show that the conventional equations may contain large errors near the sound speed (M approx. = 1). It is also found that plasma anisotropy, which is not included in the conventional equations, is a critical parameter in determining plasma transport in varying magnetic field. The new transport equations are also used to study axial confinement in multiple mirror devices from the strongly to weakly collisional regime. A new ion conduction model was worked out to extend the regime of validity of the transport equations to the low density multiple mirror regime
Radiation damping on cryoprobes
Shishmarev, Dmitry; Otting, Gottfried
2011-12-01
Radiation damping on 600 and 800 MHz cryoprobes was investigated. The phase angle β between a vector 90° phase shifted to the precessing magnetization and the rf field induced in the coil was found to depend markedly on whether an FID was being acquired or not. The magnitude of the radiation damping field was sufficiently strong to restore 95% of the equilibrium water magnetization of a 90% H 2O sample in a 5 mm sample tube within about 5 ms following a 165° pulse. This can be exploited in water flip-back versions of NOESY and TOCSY experiments of proteins, but care must be taken to limit the effect of the radiation damping field from the water on the H a protons. Long water-selective pulses can be applied only following corrections. We developed a program for correcting pulse shapes if β is non-zero. The WATERGATE scheme is shown to be insensitive to imperfections introduced by radiation damping.
Hofmann, A
2006-01-01
Abstract Landau damping is the suppression of an instability by a spread of frequencies in the beam. It is treated here from an experimental point of view. To introduce the concept we consider a set of oscillators having a spread in resonant frequencies !r and calculate the response of their there center-of-mass to an external driving force. A pulse excitation gives each oscillator the same initial velocity but, due to their different frequencies, the center-of-mass motion will decay with time. A harmonic excitation with a frequency ! being inside the distribution in !r results in oscillators responding with different phases and only a few of them having !r ! will grow to large amplitudes and absorb energy. The oscillator response to a pulse excitation, called Green function, and the one to a harmonic excitation, called transfer function, serve as a basis to calculate Landau damping which suppresses an instability at infinitesimal level before any large amplitudes are reached. This is illustrated by a negativ...
Collisional Growth of Planetesimals
Schroeter, Thomas; Nyffenegger, Oliver; Benz, Willy
2010-05-01
Motivation ---------- In the current planet formation paradigm, planets form through collisions. While the size of the primordial planetesimals is not yet established, it is recognized that this collision cascade plays an crucial role not only in determining the growth rate of the bodies but also in determining their internal structure as well as bulk chemical composition. In the case of giant gaseous planets, the nucleated instability scenario begins with the formation of critical cores of order 10 Earth masses through this very process as well. Hence, the process of collisional growth underpins the early formation of all planets massive or not. The most natural and physically appropriate approach for studying these processes is to perform N-body simulations. Unfortunately, simulating the collisional dynamics of a very large number of bodies (several hundreds of millions) over very long timescales (hundred million orbits) turns out to be computationally prohibitive. Therefore, this approach remains for the moment limited to the late stages of formation when the number of bodies has become tractable. Statistical approaches while allowing treating an arbitrary number of bodies do not provide individual collision histories and therefore cannot address some of the most important issues related to the internal structure of young planets. By introducing an orbit averaging method based on a Monte Carlo technique that allows integrating the system using time steps much longer than an orbital period, we are in a position to follow the individual collision history of several tens of millions of bodies over long evolution times. Hence, this method effectively bridges the gap between the early small planetesimals and the large embryos for which the evolution can be followed using an N-body approach. Approach -------- The method is based on an orbit averaging Monte Carlo process. The essential advantage of the method is to allow for time steps that are not dictated by the
Mouhot, Clément
2011-09-01
Going beyond the linearized study has been a longstanding problem in the theory of Landau damping. In this paper we establish exponential Landau damping in analytic regularity. The damping phenomenon is reinterpreted in terms of transfer of regularity between kinetic and spatial variables, rather than exchanges of energy; phase mixing is the driving mechanism. The analysis involves new families of analytic norms, measuring regularity by comparison with solutions of the free transport equation; new functional inequalities; a control of non-linear echoes; sharp "deflection" estimates; and a Newton approximation scheme. Our results hold for any potential no more singular than Coulomb or Newton interaction; the limit cases are included with specific technical effort. As a side result, the stability of homogeneous equilibria of the non-linear Vlasov equation is established under sharp assumptions. We point out the strong analogy with the KAM theory, and discuss physical implications. Finally, we extend these results to some Gevrey (non-analytic) distribution functions. © 2011 Institut Mittag-Leffler.
Heat flux viscosity in collisional magnetized plasmas
Energy Technology Data Exchange (ETDEWEB)
Liu, C., E-mail: cliu@pppl.gov [Princeton University, Princeton, New Jersey 08544 (United States); Fox, W. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States); Bhattacharjee, A. [Princeton University, Princeton, New Jersey 08544 (United States); Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States)
2015-05-15
Momentum transport in collisional magnetized plasmas due to gradients in the heat flux, a “heat flux viscosity,” is demonstrated. Even though no net particle flux is associated with a heat flux, in a plasma there can still be momentum transport owing to the velocity dependence of the Coulomb collision frequency, analogous to the thermal force. This heat-flux viscosity may play an important role in numerous plasma environments, in particular, in strongly driven high-energy-density plasma, where strong heat flux can dominate over ordinary plasma flows. The heat flux viscosity can influence the dynamics of the magnetic field in plasmas through the generalized Ohm's law and may therefore play an important role as a dissipation mechanism allowing magnetic field line reconnection. The heat flux viscosity is calculated directly using the finite-difference method of Epperlein and Haines [Phys. Fluids 29, 1029 (1986)], which is shown to be more accurate than Braginskii's method [S. I. Braginskii, Rev. Plasma Phys. 1, 205 (1965)], and confirmed with one-dimensional collisional particle-in-cell simulations. The resulting transport coefficients are tabulated for ease of application.
Damping of multispan heat exchanger tubes. Pt. 1: in gases
International Nuclear Information System (INIS)
Pettigrew, M.J.; Goyder, H.G.D.; Qiao, Z.L.; Axisa, F.
1986-07-01
Flow-induced vibration analyses of heat exchanger tubes require the knowledge of damping. This paper treats the question of damping on multispan heat exchanger tubes in air and gases. The different energy dissipation mechanisms that contribute to tube damping are discussed. The available experimental data are reviewed and analysed. We find that the main damping mechanism in gases is friction between tube and tube-supports. Damping is strongly related to tube-support thickness. Damping values are recommended for design purposes. This study is interesting in the nuclear industry for it often uses heat exchangers
Collisionality dependent transport in TCV SOL plasmas
DEFF Research Database (Denmark)
Garcia, Odd Erik; Pitts, R.A.; Horacek, J.
2007-01-01
and radial transport increase with plasma collisionality. Such a collisionality dependence is consistent with a recent theory for radial blob motion, which suggests that filamentary structures become electrically disconnected from the target sheaths at large collisionality and thus experience less sheath...... dissipation. This increases the radial convective transport and is possibly linked to the discharge density limit....
Power oscillation damping controller
DEFF Research Database (Denmark)
2012-01-01
A power oscillation damping controller is provided for a power generation device such as a wind turbine device. The power oscillation damping controller receives an oscillation indicating signal indicative of a power oscillation in an electricity network and provides an oscillation damping control...... signal in response to the oscillation indicating signal, by processing the oscillation damping control signal in a signal processing chain. The signal processing chain includes a filter configured for passing only signals within a predetermined frequency range....
Damping in heat exchanger tube bundles. A review
International Nuclear Information System (INIS)
Iqbal, Qamar; Khushnood, Shahab; Ghalban, Ali Roheim El; Sheikh, Nadeem Ahmed; Malik, Muhammad Afzaal; Arastu, Asif
2007-01-01
Damping is a major concern in the design and operation of tube bundles with loosely supported tubes in baffles for process shell and tube heat exchangers and steam generators which are used in nuclear, process and power generation industries. System damping has a strong influence on the amplitude of vibration. Damping depends upon the mechanical properties of the tube material, geometry of intermediate supports and the physical properties of shell-side fluid. Type of tube motion, number of supports, tube frequency, vibration amplitude, tube mass or diameter, side loads, support thickness, higher modes, shell-side temperature etc., affect damping in tube bundles. The importance of damping is further highlighted due to current trend of larger exchangers with increased shell-side velocities in modern units. Various damping mechanisms have been identified (Friction damping, Viscous damping, Squeeze film damping, Support damping. Two-Phase damping, and very recent-Thermal damping), which affect the performance of process exchangers and steam generators with respect to flow induced vibration design, including standard design guidelines. Damping in two-phase flow is very complex and highly void fraction, and flow-regime dependent. The current paper focuses on the various known damping mechanisms subjected to both single and two-phase cross-flow in process heat exchangers and steam generators and formulates the design guidelines for safer design. (author)
The damped wave equation with unbounded damping
Czech Academy of Sciences Publication Activity Database
Freitas, P.; Siegl, Petr; Tretter, C.
2018-01-01
Roč. 264, č. 12 (2018), s. 7023-7054 ISSN 0022-0396 Institutional support: RVO:61389005 Keywords : damped wave equation * unbounded damping * essential spectrum * quadratic operator funciton with unbounded coefficients * Schrodinger operators with complex potentials Subject RIV: BE - Theoretical Physics OBOR OECD: Atomic, molecular and chemical physics (physics of atoms and molecules including collision, interaction with radiation, magnetic resonances, Mössbauer effect) Impact factor: 1.988, year: 2016
Passive damping in EDS maglev systems.
Energy Technology Data Exchange (ETDEWEB)
Rote, D. M.
2002-05-03
There continues to be strong interest in the subjects of damping and drag forces associated with electrodynamic suspension (EDS) systems. While electromagnetic drag forces resist the forward motion of a vehicle and therefore consume energy, damping forces control, at least in part, the response of the vehicle to disturbances. Ideally, one would like to reduce the drag forces as much as possible while retaining adequate damping forces to insure dynamic stability and satisfactory ride quality. These two goals turn out to be difficult to achieve in practice. It is well known that maglev systems tend to be intrinsically under damped. Consequently it is often necessary in a practical system design to enhance the damping passively or actively. For reasons of cost and simplicity, it is desirable to rely as much as possible on passive damping mechanisms. In this paper, rough estimates are made of the passive damping and drag forces caused by various mechanisms in EDS systems. No attention will be given to active control systems or secondary suspension systems which are obvious ways to augment passive damping mechanisms if the latter prove to be inadequate.
Effect of polarization force on the Jeans instability in collisional dusty plasmas
A, ABBASI; M, R. RASHIDIAN VAZIRI
2018-03-01
The Jeans instability in collisional dusty plasmas has been analytically investigated by considering the polarization force effect. Instabilities due to dust-neutral and ion-neutral drags can occur in electrostatic waves of collisional dusty plasmas with self-gravitating particles. In this study, the effect of gravitational force on heavy dust particles is considered in tandem with both the polarization and electrostatic forces. The theoretical framework has been developed and the dispersion relation and instability growth rate have been derived, assuming the plane wave approximation. The derived instability growth rate shows that, in collisional dusty plasmas, the Jeans instability strongly depends on the magnitude of the polarization force.
Shape memory alloys as damping materials
International Nuclear Information System (INIS)
Humbeeck, J. van
2000-01-01
Shape memory alloys are gaining an increased interest as passive as well as active damping materials. This damping ability when applied in structural elements can lead to a better noise control, improved life time and even better performance of the envisaged tools. By passive damping, it is understood that the material converts a significant part of unwanted mechanical energy into heat. This mechanical energy can be a (resonance) vibration, impact loading or shock waves. This high damping capacity finds its origin in the thermoelastic martensitic phase due to the hysteretic mobility of martensite-variants or different phase interfaces. The damping capacity increases with increasing amplitude of the applied vibration or impact and is almost frequency independent. Special interest exists moreover for damping extreme large displacements by applying the mechanical hysteresis performed during pseudoelastic loading. This aspect is nowadays very strongly studied as a tool for protecting buildings against earthquakes in seismic active regions. Active damping can be obtained in hybrid composites by controlling the recovery stresses or strains of embedded shape memory alloy wires. This controls the internal energy fo a structure which allows controlled modal modification and tuning of the dynamical properties of structural elements. But also impact damage, acoustic radiation, dynamic shape control can be actively controlled. As a consequence improved fatigue-resistance, better performance and a longer lifetime of the structural elements can be obtained. (orig.)
DEFF Research Database (Denmark)
Andreasen, John
2009-01-01
On Dr.phil. J.J.Dampe's fight for democracy in the first part of the 19th century in Denmark and his dramatic writings......On Dr.phil. J.J.Dampe's fight for democracy in the first part of the 19th century in Denmark and his dramatic writings...
Damping in building structures during earthquakes: test data and modeling
International Nuclear Information System (INIS)
Coats, D.W. Jr.
1982-01-01
A review and evaluation of the state-of-the-art of damping in building structures during earthquakes is presented. The primary emphasis is in the following areas: 1) the evaluation of commonly used mathematical techniques for incorporating damping effects in both simple and complex systems; 2) a compilation and interpretation of damping test data; and 3) an evaluation of structure testing methods, building instrumentation practices, and an investigation of rigid-body rotation effects on damping values from test data. A literature review provided the basis for evaluating mathematical techiques used to incorporate earthquake induced damping effects in simple and complex systems. A discussion on the effectiveness of damping, as a function of excitation type, is also included. Test data, from a wide range of sources, has been compiled and interpreted for buidings, nuclear power plant structures, piping, equipment, and isolated structural elements. Test methods used to determine damping and frequency parameters are discussed. In particular, the advantages and disadvantages associated with the normal mode and transfer function approaches are evaluated. Additionally, the effect of rigid-body rotations on damping values deduced from strong-motion building response records is investigated. A discussion of identification techniques typically used to determine building parameters (frequency and damping) from strong motion records is included. Finally, an analytical demonstration problem is presented to quantify the potential error in predicting fixed-base structural frequency and damping values from strong motion records, when rigid-body rotations are not properly accounted for
Collisional Thermalization in Strongly Coupled Ultracold Neutral Plasmas
2017-01-25
NUMBER 5b. GRANT NUMBER FA9550-12-1-0267 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Thomas C Killian 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT...density plasmas such as inertial confinement fusion experiments and in nature in the interiors of gas giant planets and the crusts of neutron stars...report, e.g. AFOSR-82-1234. 5c. PROGRAM ELEMENT NUMBER. Enter all program element numbers as they appear in the report, e.g. 61101A. 5d. PROJECT
Numerical studies of shear damped composite beams using a constrained damping layer
DEFF Research Database (Denmark)
Kristensen, R.F.; Nielsen, Kim Lau; Mikkelsen, Lars Pilgaard
2008-01-01
Composite beams containing one or more damping layers are studied numerically. The work is based on a semi-analytical model using a Timoshenko beam theory and a full 2D finite element model. The material system analysed, is inspired by a train wagon suspension system used in a EUREKA project Sigma......!1841. For the material system, the study shows that the effect of the damping layer is strongly influenced by the presence of a stiff constraining layer, that enforces large shear strain amplitudes. The thickness of the damping rubber layer itself has only a minor influence on the overall damping....... In addition, a large influence of ill positioned cuts in the damping layer is observed....
International Nuclear Information System (INIS)
Singleton, N.R.; Bohm, G.J.
1977-01-01
This paper presents and discusses the results of a study of internals damping using data obtained from wave analysis of PWR plant flow tests, and shaker tests. The damping values were obtained from vibration data taken during the pre-operational testing of several reactor plants and some in air shaker tests. Parameters available in the data include the presence of the core, the presence and position of the control rod drive line, reactor coolant temperature, and combination of reactor coolant pumps in operation. Modal damping values for the structures reported were obtained from the decay of autocorrellograms or from the modal response half-power bandwidths of frequency spectra. For the lower frequency core barrel-reactor vessel beam modes 2% to 5% damping values were found for minimum damping values. Significantly higher values are found in the data when, for example, intermittent contact occurs at the core barrel level supports. Core barrel and thermal shield shell modes having natural frequencies in the frequency range of interest for seismic response calculations exhibit damping values generally on the order of 1% to 2%. Higher frequency, very low amplitude, shell modes of these structures can have damping values of less than 1%. Damping values for guide tubes were found to have minimum values of 2% to 5% depending on their core location. The cross flow velocity and thus the floor turbulence excited amplitude is higher for guide tubes in core locations near the outlet nozzles. Information on the damping of upper support columns which are similarly excited is also given. Damping values reported are suitable for normal operation design conditions, i.e., for oscillatory behavior and relatively small amplitudes. The extrapolation of the data to obtain realistic values for large seismic events and for loss of coolant accidents is also discussed
Damping in accelerators due to classical radiation
International Nuclear Information System (INIS)
Mills, F.E.
1962-01-01
The rates of change of the magnitudes of the adiabatic invariants is calculated in the case of a Hamiltonian system subjected to generalized non conservative forces. These results are applied to the case of the classical radiation of electrons in an accelerator or storage ring. The resulting expressions for the damping rates of three independent oscillation modes suggest structures which are damping in all three modes, while at the same time allowing 'strong focussing' and the attendant strong momentum compaction. (author)
Roll Damping By Rudder Control
DEFF Research Database (Denmark)
Stoustrup, Jakob; Niemann, H.H.; Blanke, M.
1994-01-01
Roll damping and simultaneous course steering by rudder control is a challenging problem where a key factor is roll damping performance in waves.......Roll damping and simultaneous course steering by rudder control is a challenging problem where a key factor is roll damping performance in waves....
Extended Rayleigh Damping Model
Directory of Open Access Journals (Sweden)
Naohiro Nakamura
2016-07-01
Full Text Available In dynamic analysis, frequency domain analysis can be used if the entire structure is linear. However, time history analysis is generally used if nonlinear elements are present. Rayleigh damping has been widely used in time history response analysis. Many articles have reported the problems associated with this damping and suggested remedies. A basic problem is that the frequency area across which the damping ratio is almost constant is too narrow. If the area could be expanded while incurring only a small increase in computational cost, this would provide an appropriate remedy for this problem. In this study, a novel damping model capable of expanding the constant frequency area by more than five times was proposed based on the study of a causal damping model. This model was constructed by adding two terms to the Rayleigh damping model and can be applied to the linear elements in the time history analysis of a nonlinear structure. The accuracy and efficiency of the model were confirmed using example analyses.
Exponential decay for solutions to semilinear damped wave equation
Gerbi, Stéphane
2011-10-01
This paper is concerned with decay estimate of solutions to the semilinear wave equation with strong damping in a bounded domain. Intro- ducing an appropriate Lyapunov function, we prove that when the damping is linear, we can find initial data, for which the solution decays exponentially. This result improves an early one in [4].
Unwrapped phase inversion with an exponential damping
Choi, Yun Seok
2015-07-28
Full-waveform inversion (FWI) suffers from the phase wrapping (cycle skipping) problem when the frequency of data is not low enough. Unless we obtain a good initial velocity model, the phase wrapping problem in FWI causes a result corresponding to a local minimum, usually far away from the true solution, especially at depth. Thus, we have developed an inversion algorithm based on a space-domain unwrapped phase, and we also used exponential damping to mitigate the nonlinearity associated with the reflections. We construct the 2D phase residual map, which usually contains the wrapping discontinuities, especially if the model is complex and the frequency is high. We then unwrap the phase map and remove these cycle-based jumps. However, if the phase map has several residues, the unwrapping process becomes very complicated. We apply a strong exponential damping to the wavefield to eliminate much of the residues in the phase map, thus making the unwrapping process simple. We finally invert the unwrapped phases using the back-propagation algorithm to calculate the gradient. We progressively reduce the damping factor to obtain a high-resolution image. Numerical examples determined that the unwrapped phase inversion with a strong exponential damping generated convergent long-wavelength updates without low-frequency information. This model can be used as a good starting model for a subsequent inversion with a reduced damping, eventually leading to conventional waveform inversion.
IDENTIFYING COLLISIONAL FAMILIES IN THE KUIPER BELT
International Nuclear Information System (INIS)
Marcus, Robert A.; Ragozzine, Darin; Murray-Clay, Ruth A.; Holman, Matthew J.
2011-01-01
The identification and characterization of numerous collisional families-clusters of bodies with a common collisional origin-in the asteroid belt has added greatly to the understanding of asteroid belt formation and evolution. More recent study has also led to an appreciation of physical processes that had previously been neglected (e.g., the Yarkovsky effect). Collisions have certainly played an important role in the evolution of the Kuiper Belt as well, though only one collisional family has been identified in that region to date, around the dwarf planet Haumea. In this paper, we combine insights into collisional families from numerical simulations with the current observational constraints on the dynamical structure of the Kuiper Belt to investigate the ideal sizes and locations for identifying collisional families. We find that larger progenitors (r ∼ 500 km) result in more easily identifiable families, given the difficulty in identifying fragments of smaller progenitors in magnitude-limited surveys, despite their larger spread and less frequent occurrence. However, even these families do not stand out well from the background. Identifying families as statistical overdensities is much easier than characterizing families by distinguishing individual members from interlopers. Such identification seems promising, provided the background population is well known. In either case, families will also be much easier to study where the background population is small, i.e., at high inclinations. Overall, our results indicate that entirely different techniques for identifying families will be needed for the Kuiper Belt, and we provide some suggestions.
Collisional stripping of planetary crusts
Carter, Philip J.; Leinhardt, Zoë M.; Elliott, Tim; Stewart, Sarah T.; Walter, Michael J.
2018-02-01
Geochemical studies of planetary accretion and evolution have invoked various degrees of collisional erosion to explain differences in bulk composition between planets and chondrites. Here we undertake a full, dynamical evaluation of 'crustal stripping' during accretion and its key geochemical consequences. Crusts are expected to contain a significant fraction of planetary budgets of incompatible elements, which include the major heat producing nuclides. We present smoothed particle hydrodynamics simulations of collisions between differentiated rocky planetesimals and planetary embryos. We find that the crust is preferentially lost relative to the mantle during impacts, and we have developed a scaling law based on these simulations that approximates the mass of crust that remains in the largest remnant. Using this scaling law and a recent set of N-body simulations of terrestrial planet formation, we have estimated the maximum effect of crustal stripping on incompatible element abundances during the accretion of planetary embryos. We find that on average approximately one third of the initial crust is stripped from embryos as they accrete, which leads to a reduction of ∼20% in the budgets of the heat producing elements if the stripped crust does not reaccrete. Erosion of crusts can lead to non-chondritic ratios of incompatible elements, but the magnitude of this effect depends sensitively on the details of the crust-forming melting process on the planetesimals. The Lu/Hf system is fractionated for a wide range of crustal formation scenarios. Using eucrites (the products of planetesimal silicate melting, thought to represent the crust of Vesta) as a guide to the Lu/Hf of planetesimal crust partially lost during accretion, we predict the Earth could evolve to a superchondritic 176Hf/177Hf (3-5 parts per ten thousand) at present day. Such values are in keeping with compositional estimates of the bulk Earth. Stripping of planetary crusts during accretion can lead to
Damping in Materials for Spintronic Applications
Mewes, Claudia
The next generation of spintronic devices relies strongly on the development of new materials with high spin polarization, optimized intrinsic damping and tunable magnetic anisotropy. Therefore, technological progress in this area depends heavily on the successful search for new materials as well as on a deeper understanding of the fundamental mechanisms of the spin polarization, the damping and the magnetic anisotropy. This talk will focus on different aspects of materials with a low intrinsic relaxation rate. Our results are based on first principles calculations in combination with a non-orthogonal tight-binding model to predict those material properties for complex materials which can be used for example in new spin based memory devices or logic devices. However, the intrinsic damping parameter predicted from first principle calculations does not take into account adjacent layers that are present in the final device. Spin pumping is a well-known contribution that has to be taken into account for practical applications using multilayer structures. More recently a strong unidirectional contribution to the relaxation in exchange bias systems has been observed experimentally. To describe this phenomenon theoretically we use the formalism of an anisotropic Gilbert damping tensor that takes the place of the (scalar) Gilbert damping parameter in the Landau-Lifshitz-Gilbert equation of motion. While for single crystals this anisotropy is expected to be small, making experimental confirmation difficult, the broken symmetry in exchange bias systems provides an excellent testing ground to study the modified magnetization dynamics under the influence of unidirectional damping. C.K.A. Mewes would like to thank her colleague T. Mewes and her students J.B. Mohammadi, A.E. Farrar. We acknowledge support by the NSF-CAREER Award No. 1452670, and NSF-CAREER Award No. 0952929.
Nuclear matter kinetic coefficients and damping of finite nuclear collective modes
International Nuclear Information System (INIS)
Toledo Piza, A.F.R. de.
1986-06-01
By carrying the general description of one-body observables beyond the mean-field approximation, those correlation terms responsible for Kinetic phenomena and those involved in the renormalization of the G-matrix mean-field in finite nuclei are identified. A Kinetic equation for the one-body density is obtained. Estimates for transport coefficients and for the damping of zero sound are obtained which point to the inadequacy of hydrodynamical descriptions of collective nuclear modes and indicate that collisional damping in large nuclei may account for one or a few tenths of the observed widths. (S.D.) [pt
Charging-delay effect on longitudinal dust acoustic shock wave in strongly coupled dusty plasma
International Nuclear Information System (INIS)
Ghosh, Samiran; Gupta, M.R.
2005-01-01
Taking into account the charging-delay effect, the nonlinear propagation characteristics of longitudinal dust acoustic wave in strongly coupled collisional dusty plasma described by generalized hydrodynamic model have been investigated. In the 'hydrodynamic limit', a Korteweg-de Vries Burger (KdVB) equation with a damping term arising due to dust-neutral collision is derived in which the Burger term is proportional to the dissipation due to dust viscosity through dust-dust correlation and charging-delay-induced anomalous dissipation. On the other hand, in the 'kinetic limit', a KdVB equation with a damping term and a nonlocal nonlinear forcing term arising due to memory-dependent strong correlation effect of dust fluid is derived in which the Burger term depends only on the charging-delay-induced dissipation. Numerical solution of integrodifferential equations reveals that (i) dissipation due to dust viscosity and principally due to charging delay causes excitation of the longitudinal dust acoustic shock wave in strongly coupled dusty plasma and (ii) dust-neutral collision does not appear to play any direct role in shock formation. The condition for the generation of shock is also discussed briefly
Collisionality dependent transport in TCV SOL plasmas
International Nuclear Information System (INIS)
Garcia, O E; Pitts, R A; Horacek, J; Madsen, J; Naulin, V; Nielsen, A H; Rasmussen, J Juul
2007-01-01
Results are presented from probe measurements in the low field side scrape-off layer (SOL) region of TCV during plasma current scan experiments. It is shown that with decreasing plasma current the radial particle density profile becomes broader and the fluctuation levels and turbulence driven radial particle flux increase. In the far SOL the fluctuations exhibit a high degree of statistical similarity and the particle density and flux at the wall radius scale inversely with the plasma current. Together with previous TCV density scan experiments, this indicates that plasma fluctuations and radial transport increase with plasma collisionality. Such a collisionality dependence is consistent with a recent theory for radial blob motion, which suggests that filamentary structures become electrically disconnected from the target sheaths at large collisionality and thus experience less sheath dissipation. This increases the radial convective transport and is possibly linked to the discharge density limit
Material damping measurement techniques
Jewsbury, Peter
Consideration is given to ways of measuring vibration damping, the experimental and analytical problems encountered, and definitions of attenuation coefficients. A versatile PC-based apparatus built for measuring the damping of forced flexural vibrations in a beam subjected to static loading within a controlled environment chamber is described. The fixed end provides an inertial reference point and the other end is subjected to static and dynamic forces. This allows the dependences of the attenuation on temperature, humidity, dynamic stress, static stress, aging, fatiguing, etc. to be assessed. The equipment can be operated in real time to give response functions and phase lags as a function of frequency or in a delayed processing mode which samples data at one frequency only and after a delayed analysis directly calculates an attenuation coefficient. Ways of handling and processing the data to minimize errors and avoid unnecessary assumptions relating to the linearity of the response or the nature of the attenuation are highlighted.
Theoretical Investigation of Anisotropic Damping in Exchange Bias Systems
Farrar, Alison; Beik Mohammadi, Jamileh; Mewes, Tim; Mewes, Claudia
An accurate description of the magnetization dynamics of exchange bias systems is essential for further development of computer read heads and STT-MRAM. There have been several theoretical predictions of an anisotropic Gilbert damping tensor, influenced by the symmetry of the crystal structure, in place of the scalar Gilbert damping parameter in the Landau-Lifshitz-Gilbert equation of motion. However, experimental confirmation is difficult as the anisotropy of the damping parameter is expected to be small for single crystals. We follow up on our experimental discovery of a strong unidirectional contribution to the relaxation of exchange bias systems by implementing an anisotropic damping tensor in our Matlab-based micromagnetics code M3. We present results for a damping tensor with unidirectional anisotropy with respect to the instantaneous orientation of the magnetization. NSF-CAREER No 1452670 and 0952929, UA Computer-Based Honors Program.
Terahertz generation by beating two Langmuir waves in a warm and collisional plasma
Energy Technology Data Exchange (ETDEWEB)
Zhang, Xiao-Bo; Qiao, Xin; Cheng, Li-Hong; Tang, Rong-An; Zhang, Ai-Xia; Xue, Ju-Kui, E-mail: xuejk@nwnu.edu.cn [Key Laboratory of Atomic & Molecular Physics and Functional Materials of Gansu Province, College of Physics and Electronics Engineering, Northwest Normal University, Lanzhou 730070 (China)
2015-09-15
Terahertz (THz) radiation generated by beating of two Langmuir waves in a warm and collisional plasma is discussed theoretically. The critical angle between the two Langmuir waves and the critical wave-length (wave vector) of Langmuir waves for generating THz radiation are obtained analytically. Furthermore, the maximum radiation energy is obtained. We find that the critical angle, the critical wave-length, and the generated radiation energy strongly depend on plasma temperature and wave-length of the Langmuir waves. That is, the THz radiation generated by beating of two Langmuir waves in a warm and collisional plasma can be controlled by adjusting the plasma temperature and the Langmuir wave-length.
Transmission problem for waves with frictional damping
Directory of Open Access Journals (Sweden)
Waldemar D. Bastos
2007-04-01
Full Text Available In this paper we consider the transmission problem, in one space dimension, for linear dissipative waves with frictional damping. We study the wave propagation in a medium with a component with attrition and another simply elastic. We show that for this type of material, the dissipation produced by the frictional part is strong enough to produce exponential decay of the solution, no matter how small is its size.
Energy Technology Data Exchange (ETDEWEB)
Mayout, Saliha; Gougam, Leila Ait [Faculty of Physics, Theoretical Physics Laboratory, Plasma Physics Group, University of Bab-Ezzouar, USTHB, B.P. 32, El Alia, Algiers 16111 (Algeria); Tribeche, Mouloud, E-mail: mouloudtribeche@yahoo.fr, E-mail: mtribeche@usthb.dz [Faculty of Physics, Theoretical Physics Laboratory, Plasma Physics Group, University of Bab-Ezzouar, USTHB, B.P. 32, El Alia, Algiers 16111 (Algeria); Algerian Academy of Sciences and Technologies, Algiers (Algeria)
2016-03-15
The combined effects of ionization, ion loss, and electron suprathermality on dust ion-acoustic solitary waves in a collisional dusty plasma are examined. Carrying out a small but finite amplitude analysis, a damped Korteweg-de Vries (dK–dV) equation is derived. The damping term decreases with the increase of the spectral index and saturates for Maxwellian electrons. Choosing typical plasma parameters, the analytical approximate solution of the dK-dV equation is numerically analyzed. We first neglect the ionization and ion loss effects and account only for collisions to estimate the relative importance between these damping terms which can act concurrently. Interestingly, we found that as the suprathermal character of the electrons becomes important, the strength of the collisions related dissipation becomes more important and causes the dust ion-acoustic solitary wave amplitude to decay more rapidly. Moreover, the collisional damping may largely prevail over the ionization and ion loss related damping. The latter becomes more effective as the electrons evolve far away from their thermal equilibrium. Our results complement and provide new insights into previously published work on this problem.
Investigation of collisional EBW damping and its importance to EBW emission from NSTX
Czech Academy of Sciences Publication Activity Database
Urban, Jakub; Preinhaelter, Josef; Diem, S.J.; Taylor, G.; Vahala, L.; Vahala, G.
2007-01-01
Roč. 52, č. 16 (2007), s. 304-304 ISSN 0003-0503. [Annual Meeting of the Division of Plasma Physics/49th./. Orlando , Florida, 12.11.2007-16.11.2007] Institutional research plan: CEZ:AV0Z20430508 Keywords : Conversion * Emission * Tokamaks * Electron Bernstein waves * Simulation * NSTX Subject RIV: BL - Plasma and Gas Discharge Physics http://meetings.aps.org/Meeting/DPP07/Content/901
First Test of Long-Range Collisional Drag via Plasma Wave Damping
Affolter, Matthew
2017-10-01
In magnetized plasmas, the rate of particle collisions is enhanced over classical predictions when the cyclotron radius rc is less than the Debye length λD. Classical theories describe local velocity scattering collisions with impact parameters ρ anti-protons at a density of 107 cm-3 and a temperature of 10 K in a 6 T trap is enhanced by a factor of 30. Supported by NSF Grant PHY-1414570 and DOE Grant DE-SC0002451. In collaboration with F. Anderegg, D.H.E. Dubin, and C.F. Driscoll.
The Duffing oscillator with damping
DEFF Research Database (Denmark)
Johannessen, Kim
2015-01-01
An analytical solution to the differential equation describing the Duffing oscillator with damping is presented. The damping term of the differential equation and the initial conditions satisfy an algebraic equation, and thus the solution is specific for this type of damping. The nonlinear term....... It is established that the period of oscillation is shorter compared to that of a linearized model but increasing with time and asymptotically approaching the period of oscillation of the linear damped model. An explicit expression for the period of oscillation has been derived, and it is found to be very accurate....
Modal damping estimates of MOS-1 solar array paddle
Fujimori, Yoshinori; Kato, Junichi; Toda, Susumu
The modal damping coefficients of MOS-1 solar array paddle have been estimated, based on experimental results of the paddle substrate—a prime load carrying component of the paddle structure—and on theoretical extrapolation. The damping coefficient values of 1st, 2nd, 3rd and 4th substrate modes are 0.69% (14.5 Hz), 0.07% (49.7 Hz), 0.27% (61.2 Hz) and 0.07% (96.7 Hz) respectively. Also this substrate experiment reveals that the effect of the air vanishes at the level of 0.01 Torr and that the relative alignment of fibers in CFRP skin vs the lines of principal stresses in the deformed state is strongly correlated with the damping level. Zener theory of thermo-elasticity coupling model has been applied to derive the damping coefficients of the plate. Then the modal damping coefficients of MOS-1 solar array paddle whose resonances lie in the range of 0.2-2 Hz are estimated by making use of the fitted curves to the experimental data. Next, the estimate is improved by considering the additional contribution from the solar cells and adhesive. Supplementing the foregoing estimates, quantitative assessment on the damping effect due to interface friction somewhere in the structure is made leading to the final estimate that the modal damping coefficients of MOS-1 solar array paddle would not be lower than 0.003.
Persistent Motor Deficits in DAMP
J Gordon Millichap
2000-01-01
Motor control in ability to perform everyday and spare-time activities was assessed at 11 to 12 years of age in 10 boys with deficits in attention, motor control and perception (DAMP) and compared with a group of 20 boys without DAMP.
Modern methods in collisional-radiative modeling of plasmas
2016-01-01
This book provides a compact yet comprehensive overview of recent developments in collisional-radiative (CR) modeling of laboratory and astrophysical plasmas. It describes advances across the entire field, from basic considerations of model completeness to validation and verification of CR models to calculation of plasma kinetic characteristics and spectra in diverse plasmas. Various approaches to CR modeling are presented, together with numerous examples of applications. A number of important topics, such as atomic models for CR modeling, atomic data and its availability and quality, radiation transport, non-Maxwellian effects on plasma emission, ionization potential lowering, and verification and validation of CR models, are thoroughly addressed. Strong emphasis is placed on the most recent developments in the field, such as XFEL spectroscopy. Written by leading international research scientists from a number of key laboratories, the book offers a timely summary of the most recent progress in this area. It ...
Signal Propagation in Collisional Plasma with Negative Ions
International Nuclear Information System (INIS)
Kaganovich, I.; Berezhnoi, S.V.; Shin, C.B.
2000-01-01
The transport of charged species in collisional currentless plasmas is traditionally thought of as a diffusion-like process. In this paper, it is demonstrated that, in contrast to two-component plasma, containing electrons and positive ions, the transport of additional ions in multi-species plasmas is not governed by diffusion, rather described by nonlinear convection. As a particular example, plasmas with the presence of negative ions have been studied. The velocity of a small perturbation of negative ions was found analytically and validated by numerical simulation. As a result of nonlinear convection, initially smooth ion density profiles break and form strongly inhomogeneous shock-like fronts. These fronts are different from collisionless shocks and shocks in fully ionized plasma. The structure of the fronts has been found analytically and numerically
COLLISIONALLY BORN FAMILY ABOUT 87 SYLVIA
International Nuclear Information System (INIS)
Vokrouhlicky, David; Nesvorny, David; Bottke, William F.; Morbidelli, Alessandro
2010-01-01
There are currently more than 1000 multi-opposition objects known in the Cybele population, adjacent and exterior to the asteroid main belt, allowing a more detailed analysis than was previously possible. Searching for collisionally born clusters in this population, we find only one statistically robust case: a family of objects about (87) Sylvia. We use a numerical model to simulate the Sylvia family long-term evolution due to gravitational attraction from planets and thermal (Yarkovsky) effects and to explain its perturbed structure in the orbital element space. This allows us to conclude that the Sylvia family must be at least several hundreds of million years old, in agreement with evolutionary timescales of Sylvia's satellite system. We find it interesting that other large Cybele-zone asteroids with known satellites-(107) Camilla and (121) Hermione-do not have detectable families of collisional fragments about them (this is because we assume that binaries with large primary and small secondary components are necessarily impact generated). Our numerical simulations of synthetic clusters about these asteroids show they would suffer a substantial dynamical depletion by a combined effect of diffusion in numerous weak mean-motion resonances and Yarkovsky forces provided their age is close to ∼4 billion years. However, we also believe that a complete effacement of these two families requires an additional component, very likely due to resonance sweeping or other perturbing effects associated with the late Jupiter's inward migration. We thus propose that both Camilla and Hermione originally had their collisional families, as in the Sylvia case, but they lost them in an evolution that lasted a billion years. Their satellites are the only witnesses of these effaced families.
Collisional Penrose process with spinning particles
Mukherjee, Sajal
2018-03-01
In this article, we have investigated collisional Penrose process (CPP) using spinning particles in a Kerr spacetime. Recent studies have shown that the collision between two spinning particles can produce a significantly high energy in the center of mass frame. Here, we explicitly compute the energy extraction and efficiency as measured by an observer at infinity. We consider the colliding particles as well as the escaping particles may contain spins. It has been shown that the energy extraction is larger than the non-spinning case and also their possibility to escape to infinity is wider than the geodesics.
First-principle description of collisional gyrokinetic turbulence in tokamak plasmas
Energy Technology Data Exchange (ETDEWEB)
Dif-Pradalier, G
2008-10-15
This dissertation starts in chapter 1 with a comprehensive introduction to nuclear fusion, its basic physics, goals and means. It especially defines the concept of a fusion plasma and some of its essential physical properties. The following chapter 2 discusses some fundamental concepts of statistical physics. It introduces the kinetic and the fluid frameworks, compares them and highlights their respective strengths and limitations. The end of the chapter is dedicated to the fluid theory. It presents two new sets of closure relations for fluid equations which retain important pieces of physics, relevant in the weakly collisional tokamak regimes: collective resonances which lead to Landau damping and entropy production. Nonetheless, since the evolution of the turbulence is intrinsically nonlinear and deeply influenced by velocity space effects, a kinetic collisional description is most relevant. First focusing on the kinetic aspect, chapter 3 introduces the so-called gyrokinetic framework along with the numerical solver - the GYSELA code - which will be used throughout this dissertation. Very generically, code solving is an initial value problem. The impact on turbulent nonlinear evolution of out of equilibrium initial conditions is discussed while studying transient flows, self-organizing dynamics and memory effects due to initial conditions. This dissertation introduces an operational definition, now of routine use in the GYSELA code, for the initial state and concludes on the special importance of the accurate calculation of the radial electric field. The GYSELA framework is further extended in chapter 4 to describe Coulomb collisions. The implementation of a collision operator acting on the full distribution function is presented. Its successful confrontation to collisional theory (neoclassical theory) is also shown. GYSELA is now part of the few gyrokinetic codes which can self-consistently address the interplay between turbulence and collisions. While
First-principle description of collisional gyrokinetic turbulence in tokamak plasmas
International Nuclear Information System (INIS)
Dif-Pradalier, G.
2008-10-01
This dissertation starts in chapter 1 with a comprehensive introduction to nuclear fusion, its basic physics, goals and means. It especially defines the concept of a fusion plasma and some of its essential physical properties. The following chapter 2 discusses some fundamental concepts of statistical physics. It introduces the kinetic and the fluid frameworks, compares them and highlights their respective strengths and limitations. The end of the chapter is dedicated to the fluid theory. It presents two new sets of closure relations for fluid equations which retain important pieces of physics, relevant in the weakly collisional tokamak regimes: collective resonances which lead to Landau damping and entropy production. Nonetheless, since the evolution of the turbulence is intrinsically nonlinear and deeply influenced by velocity space effects, a kinetic collisional description is most relevant. First focusing on the kinetic aspect, chapter 3 introduces the so-called gyrokinetic framework along with the numerical solver - the GYSELA code - which will be used throughout this dissertation. Very generically, code solving is an initial value problem. The impact on turbulent nonlinear evolution of out of equilibrium initial conditions is discussed while studying transient flows, self-organizing dynamics and memory effects due to initial conditions. This dissertation introduces an operational definition, now of routine use in the GYSELA code, for the initial state and concludes on the special importance of the accurate calculation of the radial electric field. The GYSELA framework is further extended in chapter 4 to describe Coulomb collisions. The implementation of a collision operator acting on the full distribution function is presented. Its successful confrontation to collisional theory (neoclassical theory) is also shown. GYSELA is now part of the few gyrokinetic codes which can self-consistently address the interplay between turbulence and collisions. While
Radial and tangential friction in heavy ion strongly damped collisions
International Nuclear Information System (INIS)
Jain, A.K.; Sarma, N.
1979-01-01
Deeply inelastic heavy ion collisions have been successfully described in terms of a nucleon exchange mechanism between two nucleon clouds. This model has also predicted the large angular momentum that is induced in the colliding nuclei. However computations were simplified in the earlier work by assuming that the friction was perturbation on the elastic scattering trajectory. Results of a more rigorous calculation are reported and the effect of modification of the trajectory on the energy transfer, the angular momentum induced and on the ratio of the radial to the tangential friction coefficients is reported. (auth.)
Attractors for stochastic strongly damped plate equations with additive noise
Directory of Open Access Journals (Sweden)
Wenjun Ma
2013-04-01
Full Text Available We study the asymptotic behavior of stochastic plate equations with homogeneous Neumann boundary conditions. We show the existence of an attractor for the random dynamical system associated with the equation.
Emittance damping considerations for TESLA
International Nuclear Information System (INIS)
Floettmann, K.; Rossbach, J.
1993-03-01
Two schemes are considered to avoid very large damping rings for TESLA. The first (by K.F.) makes use of the linac tunnel to accomodate most of the damping 'ring' structure, which is, in fact, not a ring any more but a long linear structure with two small bends at each of its ends ('dog-bone'). The other scheme (by J.R.) is based on a positron (or electron, respectively) recycling scheme. It makes use of the specific TESLA property, that the full bunch train is much longer (240 km) than the linac length. The spent beams are recycled seven times after interaction, thus reducing the number of bunches to be stored in the damping ring by a factor of eight. Ultimately, this scheme can be used to operate TESLA in a storage ring mode ('storage linac'), with no damping ring at all. Finally, a combination of both schemes is considered. (orig.)
Bandura, D R; Baranov, V I; Tanner, S D
2001-07-01
A low-level review of the fundamentals of ion-molecule interactions is presented. These interactions are used to predict the efficiencies of collisional fragmentation, energy damping and reaction for a variety of neutral gases as a function of pressure in a rf-driven collision/reaction cell. It is shown that the number of collisions increases dramatically when the ion energies are reduced to near-thermal (analyte signal/background ratio than can collisional fragmentation. Considerations that lead to an appropriate selection of type of gas, operating pressure, and ion energies for efficient operation of the cell for the alleviation of spectral interferences are discussed. High efficiency (large differences between reaction efficiencies of the analyte and interference ions, and concomitant suppression of secondary chemistry) might be required to optimize the chemical resolution (determination of an analyte in the presence of an isobaric interference) when using ion-molecule chemistry to suppress the interfering ion. In many instances atom transfer to the analyte, which shifts the analytical m/z by the mass of the atom transferred, provides high chemical resolution, even when the efficiency of reaction is relatively low. Examples are given of oxidation, hydroxylation, and chlorination of analyte ions (V+, Fe+, As+, Se+, Sr+, Y+, and Zr+) to improve the capability of determination of complex samples. Preliminary results are given showing O-atom abstraction by CO from CaO+ to enable the determination of Fe in high-Ca samples.
Collisional-Radiative Kinetics in Monatomic Gases
Le, Hai; Karagozian, Ann
2012-11-01
A detailed model of electronic excited states is essential in capturing all the nonequilibrium processes of a partially ionized plasma by means of collisional and radiative interactions. This collisional-radiative (CR) model allows us to consider deviations from equilibrium distribution of the internal states, and is now more commonly used in the study of plasma discharges. Prior studies by Kapper and Cambier and Panesi et al. suggest that this level of detail is needed for an accurate prediction of the flow field, and it is particularly relevant to plasma-combustion interactions. The required number of excited states needed to be included in the CR model is often prohibitively large due to the nonequilibrium condition of the plasma. The consequence is a large system of ODE's which needs to be solved at each time step. A reduced mechanism for the CR model can be attained by grouping the upper states of the atomic state distribution (ASDF) into a pseudo-level in which the population is characterized either by a uniform distribution or a Boltzmann distribution. This talk presents both detailed and reduced models for an ionizing shock in Argon. Supported by the US Air Force/ERC, Inc. under subcontract RS111738.
Diffusion and transport phenomena in a collisional magnetoplasma ...
Indian Academy of Sciences (India)
Abstract. Boltzmann-transport equation is analytically solved for two-component mag- netoplasma using Chapman–Enskog analysis to include collisional diffusion transport hav- ing anisotropies in both streaming velocity and temperature components. The modified collisional integrals are analytically solved with flux ...
Diffusion and transport phenomena in a collisional magnetoplasma ...
Indian Academy of Sciences (India)
Boltzmann-transport equation is analytically solved for two-component magnetoplasma using Chapman-Enskog analysis to include collisional diffusion transport having anisotropies in both streaming velocity and temperature components. The modified collisional integrals are analytically solved with flux integrals and ...
International Nuclear Information System (INIS)
Chiba, T.; Kobayashi, H.; Kitamura, K.; Ando, K.; Koyanagi, R.
1983-01-01
The objectives of this study are 1) to clarify the damping characteristics and the dynamic stiffness of mechanical snubber, 2) to take the damping characteristics of mechanical snubber into the damping evaluation method obtained in SDREP. Therefore, following vibration tests were conducted. 1) Component test: As a first step, mechanical snubbers were excited with sinusoidal wave, and damping ratio and dynamic stiffness were measured at several loading levels. 2) Piping model test: Second, a 8'' diameter x 16 m length 3-dimensional piping model simulating the supporting conditions of actual piping systems was tested. Damping ratio and made shapes of piping model with mechanical snubbers were measured at several supporting conditions and response levels. From the results of these tests, the damping characteristics and the dynamic stiffness of mechanical snubber can be summarized as follows: 1) The damping effect of mechanical snubber is as strong as that of oil snubber. 2) Mechanical snubber contributes effectively to the damping of piping system, and it is indicated that the damping characteristics of mechanical snubber is applicable to the damping evaluation method obtained in SDREP. (orig./HP)
Dynamic modulus and damping of boron, silicon carbide, and alumina fibers
Dicarlo, J. A.; Williams, W.
1980-01-01
The dynamic modulus and damping capacity for boron, silicon carbide, and silicon carbide-coated boron fibers were measured from -190 to 800 C. The single fiber vibration test also allowed measurement of transverse thermal conductivity for the silicon carbide fibers. Temperature-dependent damping capacity data for alumina fibers were calculated from axial damping results for alumina-aluminum composites. The dynamic fiber data indicate essentially elastic behavior for both the silicon carbide and alumina fibers. In contrast, the boron-based fibers are strongly anelastic, displaying frequency-dependent moduli and very high microstructural damping. The single fiber damping results were compared with composite damping data in order to investigate the practical and basic effects of employing the four fiber types as reinforcement for aluminum and titanium matrices.
Nonlinear magnetic reconnection in low collisionality plasmas
Energy Technology Data Exchange (ETDEWEB)
Ottaviani, M. [Commission of the European Communities, Abingdon (United Kingdom). JET Joint Undertaking; Porcelli, F. [Politecnico di Torino, Turin (Italy)
1994-07-01
The magnetic reconnection in collisionless regimes, where electron inertia is responsible for the decoupling of the plasma motion from that of the field lines, is discussed. Since the linear theory of m=1 modes breaks down for very small magnetic island widths, a non linear analysis is called for. Thus, the behaviour of a collisionless, 2-D fluid slab model in the limit {rho}/d -> 0, is analyzed. The main result is that, when the island size is larger than the linear layer but smaller than the equilibrium scale length, the reconnection rate exhibits a quasi-explosive time behaviour, during which a current density sub-layer narrower than the skin depth is formed. It is believed that the inclusion of the electron initial term in Ohm`s law opens the possibility to understand the rapidity of relaxation process observed in low collisionality plasmas. 7 refs., 6 figs.
Generalized fluid equations for parallel transport in collisional to weakly collisional plasmas
International Nuclear Information System (INIS)
Zawaideh, E.; Najmabadi, F.; Conn, R.W.
1986-01-01
A new set of two-fluid equations that are valid from collisional to weakly collisional limits is derived. Starting from gyrokinetic equations in flux coordinates with no zero-order drifts, a set of moment equations describing plasma transport along the field lines of a space- and time-dependent magnetic field is derived. No restriction on the anisotropy of the ion distribution function is imposed. In the highly collisional limit, these equations reduce to those of Braginskii, while in the weakly collisional limit they are similar to the double adiabatic or Chew, Goldberger, and Low (CGL) equations [Proc. R. Soc. London, Ser. A 236, 112 (1956)]. The new set of equations also exhibits a physical singularity at the sound speed. This singularity is used to derive and compute the sound speed. Numerical examples comparing these equations with conventional transport equations show that in the limit where the ratio of the mean free path lambda to the scale length of the magnetic field gradient L/sub B/ approaches zero, there is no significant difference between the solution of the new and conventional transport equations. However, conventional fluid equations, ordinarily expected to be correct to the order (lambda/L/sub B/) 2 , are found to have errors of order (lambda/L/sub u/) 2 = (lambda/L/sub B/) 2 /(1-M 2 ) 2 , where L/sub u/ is the scale length of the flow velocity gradient and M is the Mach number. As such, the conventional equations may contain large errors near the sound speed (Mroughly-equal1)
Temperature relaxation in collisional non equilibrium plasmas
Energy Technology Data Exchange (ETDEWEB)
Potapenko, I.F.; Bobylev, A.V.; Azevedo, C.A.; Assis, A.S. [Universidade do Estado, Rio de Janeiro, RJ (Brazil). Inst. de Fisica
1997-12-31
Full text. We study the relaxation of a space uniform plasma composed of electrons and one species of ions. To simplified the consideration, standard approach is usually accepted: the distribution functions are considered to be a Maxwellian with time dependent electron T{sub e}(t) and ion T{sub i}(t) temperatures. This approach imposes a severe restriction on the electron/ion distributions that could be very far from the equilibrium. In the present work the problem is investigated on the basis of the nonlinear kinetic Fokker - Planck equation, which is widely used for the description of collisional plasmas. This equation has many applications in plasma physics as an intrinsic part of physical models, both analytical and numerical. A new detailed description of this classical problem of the collisional plasma kinetic theory is given. A deeper examination of the problem shows that the unusual perturbation theory can not be used. The part of the perturbation of the electron distribution has the character of a boundary layer in the neighborhood of small velocities. In this work the boundary layer is thoroughly studied. The correct distribution electron function is given. Nonmonotonic character of the distribution relaxation in the tail region is observed. The corrected formula for temperature equalization is obtained. The comparison of the calculation results with the asymptotic approach is made. We should stress the important role of the completely conservative different scheme used here, which keeps the symmetric properties of the nonlinear exact equation. This allows us to make calculations without numerical error accumulations, except for machine errors. (author)
Squeeze-Film Air Damping of a Five-Axis Electrostatic Bearing for Rotary Micromotors.
Wang, Shunyue; Han, Fengtian; Sun, Boqian; Li, Haixia
2017-05-13
Air-film damping, which dominates over other losses, plays a significant role in the dynamic response of many micro-fabricated devices with a movable mass suspended by various bearing mechanisms. Modeling the damping characteristics accurately will be greatly helpful to the bearing design, control, and test in various micromotor devices. This paper presents the simulated and experimental squeeze-film air damping results of an electrostatic bearing for use in a rotary high-speed micromotor. It is shown that the boundary condition to solve the three-dimensional Reynolds equation, which governs the squeeze-film damping in the air gap between the rotor and its surrounding stator sealed in a three-layer evacuated cavity, behaves with strong cross-axis coupling characteristics. To accurately characterize the damping effect, a set of multiphysics finite-element simulations are performed by computing both the rotor velocity and the distribution of the viscous damping force acting on the rotor. The damping characteristics varying with several key structure parameters are simulated and discussed to optimize the device structure for desirable rotor dynamics. An electrical measurement method is also proposed and applied to validate the numerical results of the damping coefficients experimentally. Given that the frequency response of the electric bearing is critically dependent on the damping coefficients at atmospheric pressure, a solution to the air-film damping measurement problem is presented by taking approximate curve fitting of multi-axis experimental frequency responses. The measured squeeze-film damping coefficients for the five-axis electric bearing agrees well with the numerical solutions. This indicates that numerical multiphysics simulation is an effective method to accurately examine the air-film damping effect for complex device geometry and arbitrary boundary condition. The accurate damping coefficients obtained by FEM simulation will greatly simplify the design
Damping of coupled harmonic oscillators
Dolfo, Gilles; Vigué, Jacques
2018-03-01
When two harmonic oscillators are coupled in the presence of damping, their dynamics exhibit two very different regimes depending on the relative magnitude of the coupling and damping terms At resonance, when the coupling has its largest effect, if the coupling dominates the damping, there is a periodic exchange of energy between the two oscillators while, in the opposite case, the energy transfer from one oscillator to the other one is irreversible. We prove that the border between these two regimes goes through an exceptional point and we briefly explain what is an exceptional point. The present paper is written for undergraduate students, with some knowledge in classical mechanics, but it may also be of interest for graduate students.
Fractional delayed damped Mathieu equation
Mesbahi, Afshin; Haeri, Mohammad; Nazari, Morad; Butcher, Eric A.
2015-03-01
This paper investigates the dynamical behaviour of the fractional delayed damped Mathieu equation. This system includes three different phenomena (fractional order, time delay, parametric resonance). The method of harmonic balance is employed to achieve approximate expressions for the transition curves in the parameter plane. The n = 0 and n = 1 transition curves (both lower and higher order approximations) are obtained. The dependencies of these curves on the system parameters and fractional orders are determined. Previous results for the transition curves reported for the damped Mathieu equation, delayed second-order oscillator, and fractional Mathieu equation are confirmed as special cases of the results for the current system.
IMPACT GRINDING OF DAMP MATERIALS
Directory of Open Access Journals (Sweden)
Ladaev Nikolay Mikhaylovich
2012-10-01
Centrifugal grinders were used to analyze the grinding process. The experimental data have proven that the probability of destruction of damp samples is a lot higher than the one of dry samples, given the same initial dimensions of particles and the loading intensity. The rise in the probability of destruction is stipulated by the fact that that the grinder speed at which crushing is triggered is lower in case of damp samples than in case of dry ones. Expressions for speed that describes destruction initiation and the probability of destruction depending on the type of materials, the moisture content and the loading intensity have been derived.
Vibration of fusion reactor components with magnetic damping
Energy Technology Data Exchange (ETDEWEB)
D’Amico, Gabriele; Portone, Alfredo [Fusion for Energy – Torres Diagonal Litoral B3 – c/Josep Plá n.2, Barcelona (Spain); Rubinacci, Guglielmo [Department of Electrical Eng. and Information Technologies, Università di Napoli Federico II, Via Claudio, 21, 80125 Napoli (Italy); Testoni, Pietro, E-mail: pietro.testoni@f4e.europa.eu [Fusion for Energy – Torres Diagonal Litoral B3 – c/Josep Plá n.2, Barcelona (Spain)
2016-11-01
The aim of this paper is to assess the importance of the magnetic damping in the dynamic response of the main plasma facing components of fusion machines, under the strong Lorentz forces due to Vertical Displacement Events. The additional eddy currents due to the vibration of the conducting structures give rise to volume loads acting as damping forces, a kind of viscous damping, being these additional loads proportional to the vibration speed. This effect could play an important role when assessing, for instance, the inertial loads associated to VV movements in case of VDEs. In this paper, we present the results of a novel numerical formulation, in which the field equations are solved by adopting a very effective fully 3D integral formulation, not limited to the analysis of thin shell structures, as already successfully done in several approaches previously published.
THE CREATION OF HAUMEA'S COLLISIONAL FAMILY
International Nuclear Information System (INIS)
Schlichting, Hilke E.; Sari, Re'em
2009-01-01
Recently, the first collisional family was discovered in the Kuiper Belt. The parent body of this family, Haumea, is one of the largest objects in the Kuiper Belt and is orbited by two satellites. It has been proposed that the Haumea family was created from dispersed fragments that resulted from a giant impact. This proposed origin of the Haumea family is however in conflict with the observed velocity dispersion between the family members (∼ 140 m s -1 ) which is significantly less than the escape velocity from Haumea's surface (∼ 900 m s -1 ). In this paper we propose a different formation scenario for Haumea's collisional family. In our scenario the family members are ejected while in orbit around Haumea. This scenario, therefore, naturally gives rise to a lower velocity dispersion among the family members than expected from direct ejection from Haumea's surface. In our scenario Haumea's giant impact forms a single moon that tidally evolves outward until it suffers a destructive collision from which the family is created. We show that this formation scenario yields a velocity dispersion of ∼ 190 m s -1 among the family members which is in good agreement with the observations. We discuss an alternative scenario that consists of the formation and tidal evolution of several satellites that are ejected by collisions with unbound Kuiper Belt objects. However, the formation of the Haumea family in this latter way is difficult to reconcile with the large abundance of Kuiper Belt binaries. We, therefore, favor forming the family by a destructive collision of a single moon of Haumea. The probability for Haumea's initial giant impact in today's Kuiper Belt is less than 10 -3 . In our scenario, however, Haumea's giant impact can occur before the excitation of the Kuiper Belt and the ejection of the family members afterward. This has the advantage that one can preserve the dynamical coherence of the family and explain Haumea's original giant impact, which is several
Superconducting wiggler magnets for beam-emittance damping rings
Schoerling, Daniel
2012-01-01
Ultra-low emittance beams with a high bunch charge are necessary for the luminosity performance of linear electron-positron colliders, such as the Compact Linear Collider (CLIC). An effective way to create ultra-low emittance beams with a high bunch charge is to use damping rings, or storage rings equipped with strong damping wiggler magnets. The remanent field of the permanent magnet materials and the ohmic losses in normal conductors limit the economically achievable pole field in accelerator magnets operated at around room temperature to below the magnetic saturation induction, which is 2.15 T for iron. In wiggler magnets, the pole field in the center of the gap is reduced further like the hyperbolic cosine of the ratio of the gap size and the period length multiplied by pi. Moreover, damping wiggler magnets require relatively large gaps because they have to accept the un-damped beam and to generate, at a small period length, a large magnetic flux density amplitude to effectively damp the beam emittance....
Kinetic damping of transverse waves in a homogeneous magnetized plasma
International Nuclear Information System (INIS)
Lehnert, B.
1984-12-01
In a hot magnetized plasma large ion excursions can take place along the magnetic field lines, thereby introducing kinetic effects which cannot be treated in terms of a macroscopic fluid model. This effect is studied for the transverse wave motion of ions and electrons in a homogeneous thermal plasma, being immersed in a homogeneous magnetic field. Strong kinetic wave damping is found to occur when the product ku sub (i) of the wave number k and the ion thermal velocity u sub (i) exceeds the ion gyro frequency ω sub (i). The physical mechanism of this damping originates from large ion excursions and differs from that of Landau damping. The present results suggest that kinetic damping becomes important in hot tokamak plasmas for wave lengths of the order of a few centimeters and less. In high-beta systems, such as the Z-pinch, wave lengths in a large range become affected by kinetic damping, in some case even those which are comparable to the characteristic macroscopic dimensions. This also affects the conditions of plasma stability and plasma high-frequency heating. (Author)
Nonlocal Gilbert damping tensor within the torque-torque correlation model
Thonig, Danny; Kvashnin, Yaroslav; Eriksson, Olle; Pereiro, Manuel
2018-01-01
An essential property of magnetic devices is the relaxation rate in magnetic switching, which depends strongly on the damping in the magnetization dynamics. It was recently measured that damping depends on the magnetic texture and, consequently, is a nonlocal quantity. The damping enters the Landau-Lifshitz-Gilbert equation as the phenomenological Gilbert damping parameter α , which does not, in a straightforward formulation, account for nonlocality. Efforts were spent recently to obtain Gilbert damping from first principles for magnons of wave vector q . However, to the best of our knowledge, there is no report about real-space nonlocal Gilbert damping αi j. Here, a torque-torque correlation model based on a tight-binding approach is applied to the bulk elemental itinerant magnets and it predicts significant off-site Gilbert damping contributions, which could be also negative. Supported by atomistic magnetization dynamics simulations, we reveal the importance of the nonlocal Gilbert damping in atomistic magnetization dynamics. This study gives a deeper understanding of the dynamics of the magnetic moments and dissipation processes in real magnetic materials. Ways of manipulating nonlocal damping are explored, either by temperature, materials doping, or strain.
Vibration Damping Circuit Card Assembly
Hunt, Ronald Allen (Inventor)
2016-01-01
A vibration damping circuit card assembly includes a populated circuit card having a mass M. A closed metal container is coupled to a surface of the populated circuit card at approximately a geometric center of the populated circuit card. Tungsten balls fill approximately 90% of the metal container with a collective mass of the tungsten balls being approximately (0.07) M.
Nonlocal quasilinear damped differential inclusions
Directory of Open Access Journals (Sweden)
Mouffak Benchohra
2002-01-01
Full Text Available In this paper we investigate the existence of mild solutions to second order initial value problems for a class of damped differential inclusions with nonlocal conditions. By using suitable fixed point theorems, we study the case when the multivalued map has convex and nonconvex values.
Red cell DAMPs and inflammation.
Mendonça, Rafaela; Silveira, Angélica A A; Conran, Nicola
2016-09-01
Intravascular hemolysis, or the destruction of red blood cells in the circulation, can occur in numerous diseases, including the acquired hemolytic anemias, sickle cell disease and β-thalassemia, as well as during some transfusion reactions, preeclampsia and infections, such as those caused by malaria or Clostridium perfringens. Hemolysis results in the release of large quantities of red cell damage-associated molecular patterns (DAMPs) into the circulation, which, if not neutralized by innate protective mechanisms, have the potential to activate multiple inflammatory pathways. One of the major red cell DAMPs, heme, is able to activate converging inflammatory pathways, such as toll-like receptor signaling, neutrophil extracellular trap formation and inflammasome formation, suggesting that this DAMP both activates and amplifies inflammation. Other potent DAMPs that may be released by the erythrocytes upon their rupture include heat shock proteins (Hsp), such as Hsp70, interleukin-33 and Adenosine 5' triphosphate. As such, hemolysis represents a major inflammatory mechanism that potentially contributes to the clinical manifestations that have been associated with the hemolytic diseases, such as pulmonary hypertension and leg ulcers, and likely plays a role in specific complications of sickle cell disease such as endothelial activation, vaso-occlusive processes and tissue injury.
Composite Struts Would Damp Vibrations
Dolgin, Benjamin P.
1991-01-01
New design of composite-material (fiber/matrix laminate) struts increases damping of longitudinal vibrations without decreasing longitudinal stiffness or increasing weight significantly. Plies with opposing chevron patterns of fibers convert longitudinal vibrational stresses into shear stresses in intermediate viscoelastic layer, which dissipate vibrational energy. Composite strut stronger than aluminum strut of same weight and stiffness.
Dampness in buildings and health
DEFF Research Database (Denmark)
Bornehag, Carl-Gustaf; Blomquist, G.; Gyntelberg, F.
2001-01-01
in the epidemiological literature. A literature search identified 590 peer-reviewed articles of which 61 have been the foundation for this review. The review shows that "dampness" in buildings appears to increase the risk for health effects in the airways, such as cough, wheeze and asthma. Relative risks...
Scattering Theory of Gilbert Damping
Brataas, A.; Tserkovnyak, Y.; Bauer, G.E.W.
2008-01-01
The magnetization dynamics of a single domain ferromagnet in contact with a thermal bath is studied by scattering theory.We recover the Landau-Liftshitz-Gilbert equation and express the effective fields and Gilbert damping tensor in terms of the scattering matrix. Dissipation of magnetic energy
Collisional transport for a superthermal ion species in a plasma
International Nuclear Information System (INIS)
Cozzani, F.; Horton, W.
1985-04-01
The transport theory of a high energy ion species, injected isotropically in a magnetized plasma is considered for arbitrary values of Ω/sub HE/tau/sub sl/, Ω/sub HE/ being the high energy ion cyclotron frequency and tau/sub sl/ the slowing down time, respectively. The assumption of low density of the high energy species and the scaling on the velocities: v/sub i/ << v/sub HE/ << v/sub e/ are used to decouple the kinetic equation for the high energy species from the kinetic equation for background ions and electrons, and to simplify the cross collisional integrals. The kinetic equation is solved by a ''Chapman-Enskog'' expansion in the strength of the gradients; an equation for the first correction to the lowest order distribution function is obtained without scaling a priori the collision frequency with respect to the gyrofrequency. Various transport coefficients are explicitly calculated for the two cases of an unmagnetized and a strongly magnetized plasma
Modulational instability of electric helicons in a magnetized collisional plasma
International Nuclear Information System (INIS)
El-Ashry, M.Y.; Papuashvili, N.A.
1987-06-01
The interaction of a rf electromagnetic wave with a magnetized collisional plasma in the ultra-relativistic case has been investigated to show the effect of the collisions on the modulational instability growth rate. (author). 5 refs
Collisional transfer of population and orientation in NaK.
Wolfe, C M; Ashman, S; Bai, J; Beser, B; Ahmed, E H; Lyyra, A M; Huennekens, J
2011-05-07
Collisional satellite lines with |ΔJ| ≤ 58 have been identified in recent polarization spectroscopy V-type optical-optical double resonance (OODR) excitation spectra of the Rb(2) molecule [H. Salami et al., Phys. Rev. A 80, 022515 (2009)]. Observation of these satellite lines clearly requires a transfer of population from the rotational level directly excited by the pump laser to a neighboring level in a collision of the molecule with an atomic perturber. However to be observed in polarization spectroscopy, the collision must also partially preserve the angular momentum orientation, which is at least somewhat surprising given the extremely large values of ΔJ that were observed. In the present work, we used the two-step OODR fluorescence and polarization spectroscopy techniques to obtain quantitative information on the transfer of population and orientation in rotationally inelastic collisions of the NaK molecules prepared in the 2(A)(1)Σ(+)(v' = 16, J' = 30) rovibrational level with argon and potassium perturbers. A rate equation model was used to study the intensities of these satellite lines as a function of argon pressure and heat pipe oven temperature, in order to separate the collisional effects of argon and potassium atoms. Using a fit of this rate equation model to the data, we found that collisions of NaK molecules with potassium atoms are more likely to transfer population and destroy orientation than collisions with argon atoms. Collisions with argon atoms show a strong propensity for population transfer with ΔJ = even. Conversely, collisions with potassium atoms do not show this ΔJ = even propensity, but do show a propensity for ΔJ = positive compared to ΔJ = negative, for this particular initial state. The density matrix equations of motion have also been solved numerically in order to test the approximations used in the rate equation model and to calculate fluorescence and polarization spectroscopy line shapes. In addition, we have measured
Dust production by collisional grinding during Planetesimal-Driven Migration
Salmon, Julien; Walsh, Kevin J.; Levison, Harold F.
2017-10-01
Many main-sequence stars are surrounded by optically thin disks of dust in the absence of any detectable gas (e.g. Su et al. 2006, Meyer et al. 2008). IR and sub-millimeter observations suggest that most of the observed emission comes from grains with sizes between 1-100 microns. Since radiation forces are expected to remove these grains on timescales much shorter than the age of the parent stars (Backman & Parsce 1993, Wyatt 2008), it implies that some process is replenishing the dust, such as collisional grinding. The latter requires large impact velocities between planetesimals, which can be achieved if large objects are dynamically exciting a disk of 1-10km planetesimals. Such debris disks could be hosting ongoing planet formation, and present a powerful tool to test planet formation theories.If a planet is embedded in a gas-free planetesimal disk, the mutual gravitational interactions will force the planet to migrate (e.g. Fernandez & Ip 1984). Planetesimals situated along the direction of migration can be trapped in mean motion resonances (MMRs) with the planet (Malhotra 1993, 1995, Hahn & Malholtra 1999). Planetesimals trapped in such resonances will have their eccentricities pumped to large values as the planet continues to migrate, thereby leading to energetic collisions and dust production (Wyatt 2003, Reche et al. 2008, Mustill & Wyatt 2011).We have performed an extensive suite of simulations in which we explore the likelihood that a given set of disk parameters (mass, surface density slope, number of planetesimals) can sustain planetesimal-driven migration (PDM). We confirm the strong dependence on resolution found in previous works (e.g. Kirsch et al 2009), and find that an embryo to planetesimal mass ratio of 400 is necessary to mitigate the effects of stochasticity, which may cause migration to stall and/or reverse. After having identified disks suitable for sustained PDM, we model their evolution using LIPAD (Levison et al. 2012) taking into account
Energy Technology Data Exchange (ETDEWEB)
SCHROEDER,W. ANDREAS; NELSON,THOMAS R.; BORISOV,A.B.; LONGWORTH,J.W.; BOYER,K.; RHODES,C.K.
2000-06-07
A theoretical analysis of laser-driven collisional ejection of inner-shell electrons is presented to explain the previously observed anomalous kilovolt L-shell x-ray emission spectra from atomic Xe cluster targets excited by intense sub-picosecond 248nrn ultraviolet radiation. For incident ponderomotively-driven electrons photoionized by strong above threshold ionization, the collisional ejection mechanism is shown to be highly l-state and significantly n-state (i.e. radially) selective for time periods shorter than the collisional dephasing time of the photoionized electronic wavefunction. The resulting preference for the collisional ejection of 2p electrons by an ionized 4p state produces the measured anomalous Xe(L) emission which contains direct evidence for (i) the generation of Xe{sup 27+}(2p{sup 5}3d{sup 10}) and Xe{sup 28+}(2p{sup 5}3d{sup 9}) ions exhibiting inner-shell population inversion and (ii) a coherent correlated electron state collision responsible for the production of double 2p vacancies. For longer time periods, the selectivity of this coherent impact ionization mechanism is rapidly reduced by the combined effects of intrinsic quantum mechanical spreading and dephasing--in agreement with the experimentally observed and extremely strong {minus}{lambda}{sup {minus}6} pump-laser wavelength dependence of the efficiency of inner-shell (2p) vacancy production in Xe clusters excited in underdense plasmas.
Full orbit simulation of collisional transport of impurity ions in the MAST spherical tokamak
Romanelli, M.; McClements, K. G.; Cross, J.; Knight, P. J.; Thyagaraja, A.; Callaghan, J.
2011-05-01
Transport analysis of MAST discharges indicates that collisions are an important loss mechanism in the core of a tight aspect ratio tokamak. In the strongly varying equilibrium fields of MAST many of the assumptions of drift kinetic and neoclassical theory (e.g. small plasma inverse aspect ratio and low ratio of toroidal Larmor radius to poloidal Larmor radius) are not met by all particle species and it becomes appropriate to use full orbit analysis to evaluate heat and particle fluxes. Collisional transport of impurity ions (C6+ and W20+) has been studied using a full orbit solver, CUEBIT, to integrate the test-particle dynamics. Electromagnetic fields in MAST plasma have been modelled using the cylindrical and toroidal two-fluid codes CUTIE and CENTORI. A detailed study of the scaling of the test-particle diffusivity with collisionality in the equilibrium field reveals deviations from the standard neoclassical theory, in both the Pfirsch-Schlüter and banana regimes, and difficulties in defining a local diffusivity at low collisionalities. The effect of electric and magnetic fluctuations is also briefly addressed. It is found that field fluctuations enhance the non-diffusive nature of transport. The full orbit analysis presented here predicts levels of transport and confinement times for the examined species broadly consistent with the experimental observations.
Full orbit simulation of collisional transport of impurity ions in the MAST spherical tokamak
Energy Technology Data Exchange (ETDEWEB)
Romanelli, M; McClements, K G; Knight, P J; Thyagaraja, A [EURATOM/CCFE Fusion Association, Culham Science Centre, Abingdon, Oxon, OX14 3DB (United Kingdom); Cross, J [Department of Physics, University of Bath, Bath BA2 7AY (United Kingdom); Callaghan, J, E-mail: michele.romanelli@ccfe.ac.uk [Department of Physics, University of Oxford, New College, Oxford (United Kingdom)
2011-05-15
Transport analysis of MAST discharges indicates that collisions are an important loss mechanism in the core of a tight aspect ratio tokamak. In the strongly varying equilibrium fields of MAST many of the assumptions of drift kinetic and neoclassical theory (e.g. small plasma inverse aspect ratio and low ratio of toroidal Larmor radius to poloidal Larmor radius) are not met by all particle species and it becomes appropriate to use full orbit analysis to evaluate heat and particle fluxes. Collisional transport of impurity ions (C{sup 6+} and W{sup 20+}) has been studied using a full orbit solver, CUEBIT, to integrate the test-particle dynamics. Electromagnetic fields in MAST plasma have been modelled using the cylindrical and toroidal two-fluid codes CUTIE and CENTORI. A detailed study of the scaling of the test-particle diffusivity with collisionality in the equilibrium field reveals deviations from the standard neoclassical theory, in both the Pfirsch-Schlueter and banana regimes, and difficulties in defining a local diffusivity at low collisionalities. The effect of electric and magnetic fluctuations is also briefly addressed. It is found that field fluctuations enhance the non-diffusive nature of transport. The full orbit analysis presented here predicts levels of transport and confinement times for the examined species broadly consistent with the experimental observations.
Kinetic Damping of Toroidal Alfven Eigenmodes
International Nuclear Information System (INIS)
Fu, G.Y.; Berk, H.L.; Pletzer, A.
2005-01-01
The damping of Toroidal Alfven Eigenmodes in JET plasmas is investigated by using a reduced kinetic model. Typically no significant damping is found to occur near the center of the plasma due to mode conversion to kinetic Alfven waves. In contrast, continuum damping from resonance near the plasma edge may be significant, and when it is, it gives rise to damping rates that are compatible with the experimental observations
Clocking Femtosecond Collisional Dynamics via Resonant X-Ray Spectroscopy
van den Berg, Q. Y.; Fernandez-Tello, E. V.; Burian, T.; Chalupský, J.; Chung, H.-K.; Ciricosta, O.; Dakovski, G. L.; Hájková, V.; Hollebon, P.; Juha, L.; Krzywinski, J.; Lee, R. W.; Minitti, M. P.; Preston, T. R.; de la Varga, A. G.; Vozda, V.; Zastrau, U.; Wark, J. S.; Velarde, P.; Vinko, S. M.
2018-02-01
Electron-ion collisional dynamics is of fundamental importance in determining plasma transport properties, nonequilibrium plasma evolution, and electron damage in diffraction imaging applications using bright x-ray free-electron lasers (FELs). Here we describe the first experimental measurements of ultrafast electron impact collisional ionization dynamics using resonant core-hole spectroscopy in a solid-density magnesium plasma, created and diagnosed with the Linac Coherent Light Source x-ray FEL. By resonantly pumping the 1 s →2 p transition in highly charged ions within an optically thin plasma, we have measured how off-resonance charge states are populated via collisional processes on femtosecond time scales. We present a collisional cross section model that matches our results and demonstrates how the cross sections are enhanced by dense-plasma effects including continuum lowering. Nonlocal thermodynamic equilibrium collisional radiative simulations show excellent agreement with the experimental results and provide new insight on collisional ionization and three-body-recombination processes in the dense-plasma regime.
Anisotropic damping of Timoshenko beam elements
DEFF Research Database (Denmark)
Hansen, M.H.
2001-01-01
This report contains a description of a structural damping model for Timoshenko beam elements used in the aeroelastic code HawC developed at Risø for modeling wind turbines. The model has been developed to enable modeling of turbine blades which oftenhave different damping characteristics...... for ¤flapwise¤, ¤edgewise¤ and ¤torsional¤ vibrations. The structural damping forces acting on the beam element are modeled by viscous damping described by an element damping matrix. The composition of this matrix is basedon the element mass and stiffness matrices. It is shown how the coefficients for the mass...
Collisional activation by the fast particle
International Nuclear Information System (INIS)
Hiraoka, Kenzo
1996-01-01
Collisional activation of the matter induced by the bombardment of the fast particle is summarized. The particle with the velocity higher than the Bohr velocity (transit time through 5A shorter than 2.5x10 -16 s) experiences the electronic stopping power when it passes through the matter and induces dense electronic excitations and ionizations which results in the heavy sputtering of the matter. This kind of activation is usefully applied in the PDMS. When the particle velocity becomes lower than the Bohr velocity, the energy is mainly deposited to the matter by the nuclear stopping power, i.e., energy loss is governed by the screened Coulombic collisions of the atoms giving rise to the momentum transfer to the target nuclei. When the transit time of the particle through 5A is between 2.5x10 -16 -10 -14 s, the electronic excitation and ionization take place by the collision. These phenomena are fully utilized in the FAB/SIMS and CID techniques. With the transit time in the range of 10 -14 -2.5x10 -13 s, the velocity is not high enough for the electronic excitation and the particle loses its energy mainly by the vibrational and phonon excitation of the target. This range of the velocity corresponds to that of the massive cluster impact ionization. With the velocity equal to or lower than 2.5x10 -13 s, the energy of the incident particle is consumed mainly by the phonon excitation and the collision results in the modest heating of the colliding interface between the projectile and the target. This range of the velocity is successfully used in the ionized cluster beam technique developed by Takagi of the Kyoto University. (author). 59 refs
Theory of coupled Landau damping
Métral, Elias
1999-01-01
The influence of linear coupling between the transverse planes on Landau damping of coherent instabilities is assessed using two typical frequency distributions (Lorentzian, , and "elliptical", where ). A general stability criterion is derived in both cases that includes the coupling strength and the distance from the resonance It reveals the possibility of sharing the "stabilising" frequency spreads between the two planes. This can significantly improve the coherent beam stability, especially in cases where the situation is more critical in one plane. Another important observation is the fact that the influence of a large imaginary part in the beam-environment impedance, which normally requires a large frequency spread for Landau damping, can be compensated (at least in one plane) by a judicious choice of the coupling. The conjunction of these two features could explain why a machine like the CERN-PS can be stabilised by tuning close to a coupling resonance and can be used to determine optimum values for the...
Robust Rudder Roll Damping Control
DEFF Research Database (Denmark)
Yang, C.
-infinity theory is used to deal with the problem. The necessary mathematical tools and the H-Infinity theory as the basis of controller design are presented in Chapter 2 and 3. The mu synthesis and the D-K iteration are introduced in Chapter 3. The ship dynamics and modeling technology are discussed in Chapter 4......The results of a systematic research to solve a specific ship motion control problem, simultaneous roll damping and course keeping using the rudder are presented in this thesis. The fundamental knowledge a priori is that rudder roll damping is highly sensitive to the model uncertainty, therefore H......, two kinds of ship model have been obtained: linear ship model used for designing the controller and nonlinear model used for simulation. The ship model uncertainty is discussed in this chapter and so is a wave model because the ship's roll motion is caused by waves. Using an unstructured model...
DEFF Research Database (Denmark)
Yao, Wei; Fang, Jiakun; Zhao, Ping
2013-01-01
the characteristics of the conventional PID, but adjust the parameters of PID controller online using identified Jacobian information from RBFNN. Hence, it has strong adaptability to the variation of the system operating condition. The effectiveness of the proposed controller is tested on a two-machine five-bus power......In this paper, a nonlinear adaptive damping controller based on radial basis function neural network (RBFNN), which can infinitely approximate to nonlinear system, is proposed for thyristor controlled series capacitor (TCSC). The proposed TCSC adaptive damping controller can not only have...... system and a four-machine two-area power system under different operating conditions in comparison with the lead-lag damping controller tuned by evolutionary algorithm (EA). Simulation results show that the proposed damping controller achieves good robust performance for damping the low frequency...
Improving the Magnetic Damping of an AS-1 Seismometer
Marton, F.; Echreshzadeh, M.; Tokman, T. L.; Palaric, K. D.; Filippone, N. V.; Balzarette, M.; Sivo, J.
2016-12-01
Last year, students working on the SeismoSTEM project at Bergen Community College in New Jersey successfully manufactured and assembled an AS-1 seismometer1. For 2016, our objective has been to improve the magnetic damping mechanism invented by Chris Chapman2. As the mass on the boom is displaced by seismic waves, the spring will cause the mass to oscillate, therefore, damping is required. To achieve this, a paddle-shaped piece of copper, along with steel plates holding strong neodymium magnets are used. A localized eddy current is then induced, which then creates an opposing magnetic field. The challenges we faced for the summer internship was the fact that there was either too much or too little damping to distinguish the waves of an earthquake. However, we resolved the issue by designing our own prototype for moving the steel plates away and toward the copper paddle, to achieve critical damping. This was successfully completed by attaching two L-shaped pieces of aluminum, along with a cylindrical piece, to form a yoke. We then drilled a hole through the cylindrical piece and a plastic block for a bolt to slide through. Finally, the head of the bolt would then be used as a knob to shift the two plates away from and toward the paddle simultaneously. Although this was our solution for moving the plates horizontally, we also needed to find a way to lock the plates in place once we found the correct amount of damping. We accomplished this task by drilling two slotted holes on two symmetrical sheets of aluminum, which will allow us to slide the plates, and finally, lock them into place to avoid wobbling. References: 1Tokman, T.L. et al., What's shaking? Manufacturing & assembling an AS-1 educational seismometer for undergraduate stem research, Geological Society of America Abstracts with Programs. Vol. 47, No. 7, p.524, 2015. 2http://www.jclahr.com/science/psn/chapman/as1%20damping/
Modelling of Dampers and Damping in Structures
DEFF Research Database (Denmark)
Høgsberg, Jan Riess
2006-01-01
and the maximum attainable damping are found by maximizing the expression for the damping ratio. The theory is formulated for linear damper models, but may also be applied for non-linear dampers in terms of equivalent linear parameters for stiffness and damping, respectively. The format of the expressions......, and thereby the damping, of flexible structures are generally described in terms of the dominant vibration modes. A system reduction technique, where the damped vibration mode is constructed as a linear combination of the undamped mode shape and the mode shape obtained by locking the damper, is applied....... This two-component representation leads to a simple solution for the modal damping representing the natural frequency and the associated damping ratio. It appears from numerical examples that this system reduction technique provides very accurate results. % Analytical expressions for the optimal tuning...
The DAMPE silicon tungsten tracker
Gallo, Valentina; Asfandiyarov, R; Azzarello, P; Bernardini, P; Bertucci, B; Bolognini, A; Cadoux, F; Caprai, M; Domenjoz, M; Dong, Y; Duranti, M; Fan, R; Franco, M; Fusco, P; Gargano, F; Gong, K; Guo, D; Husi, C; Ionica, M; Lacalamita, N; Loparco, F; Marsella, G; Mazziotta, M N; Mongelli, M; Nardinocchi, A; Nicola, L; Pelleriti, G; Peng, W; Pohl, M; Postolache, V; Qiao, R; Surdo, A; Tykhonov, A; Vitillo, S; Wang, H; Weber, M; Wu, D; Wu, X; Zhang, F; De Mitri, I; La Marra, D
2017-01-01
The DArk Matter Particle Explorer (DAMPE) satellite has been successfully launched on the 17th December 2015. It is a powerful space detector designed for the identification of possible Dark Matter signatures thanks to its capability to detect electrons and photons with an unprecedented energy resolution in an energy range going from few GeV up to 10 TeV. Moreover, the DAMPE satellite will contribute to a better understanding of the propagation mechanisms of high energy cosmic rays measuring the nuclei flux up to 100 TeV. DAMPE is composed of four sub-detectors: a plastic strip scintillator, a silicon-tungsten tracker-converter (STK), a BGO imaging calorimeter and a neutron detector. The STK is made of twelve layers of single-sided AC-coupled silicon micro-strip detectors for a total silicon area of about 7 $m^2$ . To promote the conversion of incident photons into electron-positron pairs, tungsten foils are inserted into the supporting structure. In this document, a detailed description of the STK constructi...
Collisional interaction between metastable neon atoms
Energy Technology Data Exchange (ETDEWEB)
Drunen, Wouter Johannes van
2008-07-07
In this thesis, the study of cold gases of neon atoms in different metastable states is described. It contains measurements of the collisional parameters for both the 3s[3/2]{sub 2} and the 3s'[1/2]{sub 0} metastable state and the dependence of the inelastic loss on external fields. Furthermore, the investigation of frequency dependent laser-induced collisions, and the possibility to excite photoassociation resonances is presented. For the measurements described here, neon atoms have been confined in a magnetooptical trap, in a magnetostatic trap, or in an optical dipole trap, respectively. By laser cooling inside the magnetic trap, atomic samples with more than 95 percent occupation of the magnetic substate m{sub J} = +2 could be prepared. They have a typical temperature of 0.5 mK, central densities up to 10{sup 11} cm{sup -3}, and a central phase-space density of up to 2.2.10{sup -7}. After loading the optical dipole trap from the magnetic trap, 2.5.10{sup 6} atoms with typical temperatures of 0.1 mK, and central densities up to 5.10{sup 10} cm{sup -3} were trapped. By evaporative cooling of the atoms in the magnetic trap we could increase the phase-space density by a factor of 200 to 5.10{sup -5}. Investigating the frequency dependence of laser-induced collisions did not reveal an experimental signature for the excitation of photoassociation resonances. For the {sup 3}D{sub 3} line a frequency dependence of laser enhanced Penning ionization was observed. Measurement of the two-body loss coefficient as function of the magnetic field showed a field dependence of the inelastic loss. These losses increase towards both small and large offset fields. The implementation of an optical dipole trap allowed us to trap the {sup 3}P{sub 0} metastable state. From the trap loss measurements we determined the two-body loss coefficient of the {sup 3}P{sub 0} metastable state for both bosonic isotopes {sup 20}Ne and {sup 22}Ne. For {sup 20}Ne we obtained {beta}=6{sup +5}{sub
Engineered connectivity in carbon nanotube films for damping applications
Lass, Eric; Ajayan, Pulickel M.; Koratkar, Nikhil A.
2003-07-01
Multiwalled carbon nanotube thin films were fabricated using catalytic chemical vapor deposition of xylene-ferrocene mixture precursor. The nanotube films were employed as inter-layers within composite systems to reinforce the interfaces between composite plies, enhancing laminate stiffness as well as structural damping. Experiments conducted using a piezo-silica composite beam with an embedded nano-film sub-layer indicated up to 200% increase in the inherent damping level and 30% increase in the baseline bending stiffness with minimal increase in structural weight. Scanning Electron Microscopy (SEM) characterization of the nano-film was also conducted to investigate the mechanics of stiffness and damping augmentation. The study revealed a fascinating network of densely packed, highly interlinked multiwalled nanotubes (MWNTs). This inter-tube connectivity resulted in strong interactions between adjacent nanotube clusters as they shear relative to each other causing energy dissipation within the nano-film. Molecular Dynamics (MD) simulations confirmed that inter-tube interaction was the dominant mechanism for damping within the nano-film layer. The cross-links between nanotubes also served to improve load transfer within the network resulting in improved stiffness properties.
Nonperturbative study of the damping of giant resonances in hot nuclei
International Nuclear Information System (INIS)
De Blasio, F.V.; Cassing, W.; Tohyama, M.; Bortignon, P.F.; Broglia, R.A.
1992-01-01
The damping of dipole and quadrupole motion in 16 O and 40 Ca at zero and finite temperature is studied including particle-particle and particle-hole interactions to all orders of perturbation. We find that the dipole dynamics in these light nuclei is well described in terms of mean-field theory (time-dependent Hartree-Fock), while the quadrupole motion is strongly damped through the coupling to more complicated configurations. Both the centroid and the damping width of the quadrupole and dipole giant resonances show a clear stability with temperature as a consequence of the weakening of the interaction, which contrasts with the increase of the phase space
ICAN/DAMP-integrated composite analyzer with damping analysis capabilities: User's manual
Saravanos, Dimitrious A.; Sanfeliz, Jose G.
1992-01-01
This manual describes the use of the computer code ICAN/DAMP (Integrated Composite Analyzer with Damping Analysis Capabilities) for the prediction of damping in polymer-matrix composites. The code is written in FORTRAN 77 and is a version of the ICAN (Integrated Composite ANalyzer) computer program. The code incorporates a new module for synthesizing the material damping from micromechanics to laminate level. Explicit micromechanics equations based on hysteretic damping are programmed relating the on-axis damping capacities to the fiber and matrix properties and fiber volume ratio. The damping capacities of unidirectional composites subjected to off-axis loading are synthesized from on-axis damping values. The hygrothermal effect on the damping performance of unidirectional composites caused by temperature and moisture variation is modeled along with the damping contributions from interfacial friction between broken fibers and matrix. The temperature rise is continuously vibrating composite plies and composite laminates is also estimated. The ICAN/DAMP user's manual provides descriptions of the damping analysis module's functions, structure, input requirements, output interpretation, and execution requirements. It only addresses the changes required to conduct the damping analysis and is used in conjunction with the 'Second Generation Integrated Composite Analyzer (ICAN) Computer Code' user's manual (NASA TP-3290).
Gonzalez, M Micaela; Rasse-Suriani, Federico A O; Franca, Carlos A; Diez, Reinaldo Pis; Gholipour, Yousef; Nonami, Hiroshi; Erra-Balsells, Rosa; Cabrerizo, Franco M
2012-12-21
Norharmane is a compound that belongs to a family of alkaloids called β-carbolines (βCs). These alkaloids are present in a wide range of biological systems, playing a variety of significant photo-dependent roles. Upon UV-A irradiation, βCs are able to act as efficient photosensitizers. In this work, we have investigated the photosensitized oxidation of 2'-deoxyadenosine 5'-monophosphate (dAMP) by norharmane in an aqueous phase, upon UV-A (350 nm) irradiation. The effect of the pH was evaluated on both the interactions between norharmane and dAMP in the ground and electronic excited states, and on the dAMP photosensitized oxidation. A quite strong static interaction between norharmane and dAMP was observed, especially under those pH conditions where the protonated form of the alkaloid is present (pH dAMP complex is the operative mechanism in the dAMP photosensitization.
Damping rates of the SRRC storage ring
International Nuclear Information System (INIS)
Hsu, K.T.; Kuo, C.C.; Lau, W.K.; Weng, W.T.
1995-01-01
The SRRC storage ring is a low emittance synchrotron radiation machine with nominal operation energy 1.3 GeV. The design damping time due to synchrotron radiation is 10.7, 14.4, 8.7 ms for the horizontal, vertical and longitudinal plane, respectively. The authors measured the real machine damping time as a function of bunch current, chromaticity, etc. To damp the transverse beam instability, especially in the vertical plane, they need to increase chromaticity to large positive value. The damping rates are much larger than the design values. Landau damping contribution in the longitudinal plane is quite large, especially in the multibunch mode. The estimated synchrotron tune spread from the Landau damping is in agreement with the measured coherent longitudinal coupled bunch oscillation amplitude
Modelling of Collisional Ionization in Laser Excited Sodium Atoms
Mahmoud, M.; Gamal, Y.
1995-12-01
The time evolution of the energy distribution of the free electrons created by collisional ionization of sodium vapor resonantly excited with cw laser due to different physical mechanisms have been studied theoretically. The calculations clarified that the distribution of the electron energy tends to become non-Maxwellian for different periods of time. Also the computational model indicated that the major processes in the different stages of the plasma creation are purely collisional for both excitation and ionization. Moreover our calculations of energy spectra of electrons have characteristic peaks corresponding to associative ionization and superelastic collisions. A reasonable agreement with experiments is obtained.
Parametric Landau damping of space charge modes
Energy Technology Data Exchange (ETDEWEB)
Macridin, Alexandru [Fermilab; Burov, Alexey [Fermilab; Stern, Eric [Fermilab; Amundson, James [Fermilab; Spentzouris, Panagiotis [Fermilab
2016-09-23
Landau damping is the mechanism of plasma and beam stabilization; it arises through energy transfer from collective modes to the incoherent motion of resonant particles. Normally this resonance requires the resonant particle's frequency to match the collective mode frequency. We have identified an important new damping mechanism, parametric Landau damping, which is driven by the modulation of the mode-particle interaction. This opens new possibilities for stability control through manipulation of both particle and mode-particle coupling spectra. We demonstrate the existence of parametric Landau damping in a simulation of transverse coherent modes of bunched accelerator beams with space charge.
Phenomenology of chiral damping in noncentrosymmetric magnets
Akosa, Collins Ashu
2016-06-21
A phenomenology of magnetic chiral damping is proposed in the context of magnetic materials lacking inversion symmetry. We show that the magnetic damping tensor acquires a component linear in magnetization gradient in the form of Lifshitz invariants. We propose different microscopic mechanisms that can produce such a damping in ferromagnetic metals, among which local spin pumping in the presence of an anomalous Hall effect and an effective “s-d” Dzyaloshinskii-Moriya antisymmetric exchange. The implication of this chiral damping in terms of domain-wall motion is investigated in the flow and creep regimes.
Nonlinear saturation of stimulated Raman scattering in a collisional homogeneous plasma
International Nuclear Information System (INIS)
McKinstrie, C.J.
1985-11-01
Using multiple scale analysis, the nonlinear saturation of the stimulated Raman scattering instability is examined in a collisional homogeneous plasma. The first problem considered is the temporal problem in an infinite plasma, with a ubiquitous driver and arbitrary damping for each wave. The second problem considered is the absolute Raman instability in a finite plasma. The incident wave amplitude exceeds the absolute instability threshold by the fractional amount Δ. In the marginally unstable regime, the complete time dependence and spatial variation of each wave amplitude is obtained. An expression for the reflected light intensity is determined analytically, and is proportional to Δ. The conditions under which the steady-state results can be extended to the moderately unstable regime are discussed. The reflected light intensity is compared to values predicted for the convective instability, for the same incident intensity. In ''short'' plasmas, i.e., ones which extend over only a few linear convective gain lengths, the reflected intensity is found to be much higher when the absolute instability is excited
Limitations of Hall MHD as a model for turbulence in weakly collisional plasmas
Directory of Open Access Journals (Sweden)
G. G. Howes
2009-03-01
Full Text Available The limitations of Hall MHD as a model for turbulence in weakly collisional plasmas are explored using quantitative comparisons to Vlasov-Maxwell kinetic theory over a wide range of parameter space. The validity of Hall MHD in the cold ion limit is shown, but spurious undamped wave modes exist in Hall MHD when the ion temperature is finite. It is argued that turbulence in the dissipation range of the solar wind must be one, or a mixture, of three electromagnetic wave modes: the parallel whistler, oblique whistler, or kinetic Alfvén waves. These modes are generally well described by Hall MHD. Determining the applicability of linear kinetic damping rates in turbulent plasmas requires a suite of fluid and kinetic nonlinear numerical simulations. Contrasting fluid and kinetic simulations will also shed light on whether the presence of spurious wave modes alters the nonlinear couplings inherent in turbulence and will illuminate the turbulent dynamics and energy transfer in the regime of the characteristic ion kinetic scales.
Dolgin, Benjamin P. (Inventor)
1994-01-01
A superconductive load bearing support without a mechanical contact and vibration damping for cryogenic instruments in space is presented. The levitation support and vibration damping is accomplished by the use of superconducting magnets and the 'Meissner' effect. The assembly allows for transfer of vibration energy away from the cryogenic instrument which then can be damped by the use of either an electronic circuit or conventional vibration damping mean.
Collisional effects on coherent nonlinear wave particle interactions at cyclotron harmonics
International Nuclear Information System (INIS)
Carter, M.D.; Callen, J.D.; Batchelor, D.B.; Goldfinger, R.C.
1985-06-01
When particle orbits are trapped very near a cyclotron harmonic resonance, the quasilinear concept of weakly perturbed, uncorrelated passages through resonance breaks down, and nonlinear effects become important. Numerical as well as analytic studies demonstrate that relativistic detuning of the resonance can be important for electrons even at low initial energies (approx. 20 eV) and that coupling to perturbed parallel motion can lead to strong interactions for values of the turning point where the wave frequency differs from a harmonic multiple of the bounce averaged gyrofrequency by an integral multiple of the bounce frequency. The resultant motion is described by large periodic energy excursions for which small angle Coulomb collisions or other randomization processes are required to realize net heating. Analytic formulae are derived describing the energy excursion behavior and heating in a mildly relativistic limit. Also, a Monte Carlo numerical model of the collisional effects on the orbits has been employed to study electron heating at the second harmonic cyclotron resonance and to test the analytic results. In certain regimes of collisionality, a strong enhancement over quasilinear heating has been found
Electromagnetic modes in cold magnetized strongly coupled plasmas
Tkachenko, I. M.; Ortner, J.; Rylyuk, V. M.
1999-01-01
The spectrum of electromagnetic waves propagating in a strongly coupled magnetized fully ionized hydrogen plasma is found. The ion motion and damping being neglected, the influence of the Coulomb coupling on the electromagnetic spectrum is analyzed.
Susceptibility for cigarette smoke-induced DAMP release and DAMP-induced inflammation in COPD.
Pouwels, Simon D; Hesse, Laura; Faiz, Alen; Lubbers, Jaap; Bodha, Priya K; Ten Hacken, Nick H T; van Oosterhout, Antoon J M; Nawijn, Martijn C; Heijink, Irene H
2016-11-01
Cigarette smoke (CS) exposure is a major risk factor for chronic obstructive pulmonary disease (COPD). We investigated whether CS-induced damage-associated molecular pattern (DAMP) release or DAMP-mediated inflammation contributes to susceptibility for COPD. Samples, including bronchial brushings, were collected from young and old individuals, susceptible and nonsusceptible for the development of COPD, before and after smoking, and used for gene profiling and airway epithelial cell (AEC) culture. AECs were exposed to CS extract (CSE) or specific DAMPs. BALB/cByJ and DBA/2J mice were intranasally exposed to LL-37 and mitochondrial (mt)DAMPs. Functional gene-set enrichment analysis showed that CS significantly increases the airway epithelial gene expression of DAMPs and DAMP receptors in COPD patients. In cultured AECs, we observed that CSE induces necrosis and DAMP release, with specifically higher galectin-3 release from COPD-derived compared with control-derived cells. Galectin-3, LL-37, and mtDAMPs increased CXCL8 secretion in AECs. LL-37 and mtDAMPs induced neutrophilic airway inflammation, exclusively in mice susceptible for CS-induced airway inflammation. Collectively, we show that in airway epithelium from COPD patients, the CS-induced expression of DAMPs and DAMP receptors in vivo and the release of galectin-3 in vitro is exaggerated. Furthermore, our studies indicate that a predisposition to release DAMPs and subsequent induction of inflammation may contribute to the development of COPD. Copyright © 2016 the American Physiological Society.
Weakly nonlinear electron plasma waves in collisional plasmas
DEFF Research Database (Denmark)
Pecseli, H. L.; Rasmussen, J. Juul; Tagare, S. G.
1986-01-01
The nonlinear evolution of a high frequency plasma wave in a weakly magnetized, collisional plasma is considered. In addition to the ponderomotive-force-nonlinearity the nonlinearity due to the heating of the electrons is taken into account. A set of nonlinear equations including the effect...
Nonlinear heat and particle transport due to collisional drift waves
Energy Technology Data Exchange (ETDEWEB)
Nishi-kawa, K.I.; Hatori, T.; Terashima, Y.
1977-03-01
The nonlinear evolution of unstable modes which govern transport processes in magnetically confined plasmas were investigated. A nonlinear theory of unstable collisional drift wave, and the consequent nonlinear transport were extended to include electron and ion temperature gradients. Thermal transport properties are discussed and basic equations are given.
Collisional Effect On Magnetosonic Solitons In A Dusty Plasma Slab ...
African Journals Online (AJOL)
An analytical investigation of collisional effect on magnetosonic solitons in a dusty plasma slab is presented. We have derived and presented solutions of nonlinear magetohydrodynamic equations for a warm dusty magnetoplasma. It is observed that, our work could be considered a general case for magnetosonic solutions ...
Diffusion and transport phenomena in a collisional magnetoplasma ...
Indian Academy of Sciences (India)
... anisotropies in both streaming velocity and temperature components. The modified collisional integrals are analytically solved with flux integrals and perturbed kinetic equation to arrive at drift diffusion velocity and resulting transport coefficients which are markedly affected by both streaming and temperature anisotropy.
Electrostatic sheath at the boundary of a collisional dusty plasma
Indian Academy of Sciences (India)
Abstract. Considering the Boltzmann response of the ions and electrons in plasma dynamics and inertial dynamics of the dust charged grains in a highly collisional dusty plasma, the nature of the electrostatic potential near a boundary is investigated. Based on the fluid approximation, the forma- tion as well as the ...
A Collisional Database and Web Service within the Virtual Atomic ...
Indian Academy of Sciences (India)
MOL-D database is a collection of cross-sections and rate coefficients for specific collisional processes and a web service within the Serbian Virtual Observatory ... Hydrogen and helium molecular ion data are important for calculation of solar and stellar atmosphere models and for radiative transport, as well as for kinetics of ...
Coulomb collisional relaxation process of ion beams in magnetized plasmas
Nishimura, Y.
2010-01-01
An orbit following code is developed to calculate ion beam trajectories in magnetized plasmas. The equation of motion (the Newton's equation) is solved including the Lorentz force term and Coulomb collisional relaxation term. Furthermore, a new algorithm is introduced by applying perturbation method regarding the collision term as a small term. The reduction of computation time is suggested.
Czech Academy of Sciences Publication Activity Database
Gunn, J. P.; Fuchs, Vladimír; Kočan, M.
2013-01-01
Roč. 55, č. 4 (2013), 045012-045012 ISSN 0741-3335 R&D Projects: GA MŠk 7G10072 Institutional support: RVO:61389021 Keywords : plasma * collisions * magnetic field * retarding field analyzer Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 2.386, year: 2013 http://iopscience.iop.org/0741-3335/55/4/045012/pdf/0741-3335_55_4_045012.pdf
What processes control collisional growth in marine stratocumulus?
Chuang, P. Y.; Hu, Z.
2017-12-01
Collisional growth in marine stratocumulus is the key process in the formation of drizzle, and thus in controlling the moisture and energy budgets, and radiative properties of such clouds. However, there exists substantial variability in microphysical properties of drizzle on length scales as small as a tens of meters. The goal of this study is to better identify the processes that lead to collisional growth at cloud top, which is responsible for triggering drizzle and causing its variability. To achieve this goal, aircraft measurements at cloud top in marine stratocumulus from the VOCALS (VAMOS Ocean Cloud Aerosol Land Study) are analyzed to examine the relationship between collisionally-formed drops and dynamic (updraft velocity, turbulence), thermodynamic (temperature, moist static energy), and microphysical (liquid water content, properties of the drop size distribution) properties at cloud top. Our first finding is that collisionally-formed drops correlate well with air parcels that have resided at or near cloud top for longer times. A second finding is that such drops are not preferentially found in clusters (in contrast with cumulus clouds). Lastly, the length scale at which any meaningful relationships emerge is at most a few meters; at larger length scales correlations disappear. This length scale is considerably smaller than that used in most large-eddy simulations of stratocumulus. These results form a picture where in these clouds, collisional growth is governed by a subset of small air parcels (a few cubic meters in volume) that randomly persist at or near cloud top for durations many times longer than average such that drops within this volume can experience more collisions.
Damping-off in forest nurseries
Carl Hartley
1921-01-01
Damping-off is the commonest English name for a symptomatic group of diseases affecting great numbers of plant species of widely separated phylogenetic groups. It is commonly used for any disease which results in the rapid decay of young succulent seedlings or soft cuttings. Young shoots from underground rootstocks may also be damped-off before they break through the...
Directory of Open Access Journals (Sweden)
Emilie eVénéreau
2015-08-01
Full Text Available Our body handles tissue damage by activating the immune system in response to intracellularmolecules released by injured tissues (Damage-Associated Molecular Patterns, DAMPs, in a similar way as it detects molecular motifs conserved in pathogens (pathogen-associated molecular patterns, PAMPs. DAMPs are molecules that have a physiological role inside the cell, but acquire additional functions when they are released outside the cell: they alert the body about danger, stimulate an inflammatory response, and finally promote the regeneration process. Beside their passive release by dead cells, some DAMPs can be secreted or exposed by living cells undergoing a life-threatening stress. DAMPs have been linked to inflammation and related disorders: hence, inhibition of DAMP-mediated inflammatory responses is a promising strategy to improve the clinical management of infection- and injury-elicited inflammatory diseases. However, it is important to consider that DAMPs are not only danger signals but also central players in tissue repair. Indeed, some DAMPs have been studied for their role in tissue healing after sterile or infection-associated inflammation. This review is focused on two exemplary DAMPs, HMGB1 and ATP, and their contribution to both inflammation and tissue repair.
Modified Composite Struts Would Damp Vibrations
Chen, Gun-Shing; Dolgin, Benjamin P.
1993-01-01
Composite-material (fiber/matrix laminate) struts damping longitudinal vibrations fabricated more easily in proposed new design. Prior design described in "Composite Struts Would Damp Vibrations" (NPO-17914). New design similar except pattern of fibers includes rounded bends (instead of sharp bends) in fibers.
On Collisionless Damping of Ion Acoustic Waves
DEFF Research Database (Denmark)
Jensen, Vagn Orla; Petersen, P.I.
1973-01-01
Exact theoretical treatments show that the damping of ion acoustic waves in collisionless plasmas does not vanish when the derivative of the undisturbed distribution function at the phase velocity equals zero.......Exact theoretical treatments show that the damping of ion acoustic waves in collisionless plasmas does not vanish when the derivative of the undisturbed distribution function at the phase velocity equals zero....
Bending rate damping in elastic systems
Banks, H. T.; Wang, Y.; Fabiano, R. H.
1989-01-01
Preliminary results of an investigation of the bending rate damping model for elastic structures are presented. A model for which the internal damping term is physically plausible and which can accomodate cantilevered boundary conditions is discussed. The model formulation and mathematical foundations are given, and numerical results are discussed.
Plasmons in strong superconductors
International Nuclear Information System (INIS)
Baldo, M.; Ducoin, C.
2011-01-01
We present a study of the possible plasmon excitations that can occur in systems where strong superconductivity is present. In these systems the plasmon energy is comparable to or smaller than the pairing gap. As a prototype of these systems we consider the proton component of Neutron Star matter just below the crust when electron screening is not taken into account. For the realistic case we consider in detail the different aspects of the elementary excitations when the proton, electron components are considered within the Random-Phase Approximation generalized to the superfluid case, while the influence of the neutron component is considered only at qualitative level. Electron screening plays a major role in modifying the proton spectrum and spectral function. At the same time the electron plasmon is strongly modified and damped by the indirect coupling with the superfluid proton component, even at moderately low values of the gap. The excitation spectrum shows the interplay of the different components and their relevance for each excitation modes. The results are relevant for neutrino physics and thermodynamical processes in neutron stars. If electron screening is neglected, the spectral properties of the proton component show some resemblance with the physical situation in high-T c superconductors, and we briefly discuss similarities and differences in this connection. In a general prospect, the results of the study emphasize the role of Coulomb interaction in strong superconductors.
Nonlinear effects in the damping of third-sound pulses
International Nuclear Information System (INIS)
Browne, D.A.
1984-01-01
We show that nonlinearities in the equations of motion for a third-sound pulse in a thick superfluid film lead to the production of short-wavelength solitons. The soliton damping arises from viscous stresses in the film, rather than from coupling to thermal currents in the vapor and the substrate as in the hydrodynamic regime. These solitons are more strongly damped than a long-wavelength third-sound wave and lead to a larger attenuation of the pulse. We show that this mechanism can account for the discrepancy between attenuation calculated theoretically for the long-wavelength limit and the experimentally observed attenuation of low-amplitude third-sound pulses
Large space structure damping design
Pilkey, W. D.; Haviland, J. K.
1983-01-01
Several FORTRAN subroutines and programs were developed which compute complex eigenvalues of a damped system using different approaches, and which rescale mode shapes to unit generalized mass and make rigid bodies orthogonal to each other. An analytical proof of a Minimum Constrained Frequency Criterion (MCFC) for a single damper is presented. A method to minimize the effect of control spill-over for large space structures is proposed. The characteristic equation of an undamped system with a generalized control law is derived using reanalysis theory. This equation can be implemented in computer programs for efficient eigenvalue analysis or control quasi synthesis. Methods to control vibrations in large space structure are reviewed and analyzed. The resulting prototype, using electromagnetic actuator, is described.
Identification of Damping from Structural Vibrations
DEFF Research Database (Denmark)
Bajric, Anela
Reliable predictions of the dynamic loads and the lifetime of structures are inﬂuenced by the limited accuracy concerning the level of structural damping. The mechanisms of damping cannot be derived analytically from ﬁrst principles, and in the design of structures the damping is therefore based....... This expression can be incorporated into an output-only system identiﬁcation technique as well as in traditional experimental modal analysis techniques. The identiﬁed damping matrix is of high accuracy and yields a real-valued symmetric matrix from simulations. It is furthermore shown, by measurements of a model......-scale ﬁve-story shear building, that the estimated complex-valued mode shapes are reproducible and their convergence concerning the measurement duration validates that the non-classical damping matrix can be re-constructed robustly by estimating the complex-valued modal parameters of dynamic structures...
Overview on methods for formulating explicit damping matrices for non-classically damped structures
International Nuclear Information System (INIS)
Xu, J.
1998-04-01
In computing the dynamic response of a connected system with multiple components having dissimilar damping characteristics, which is often referred to as nonclassically damped system such as nuclear power plant piping systems supported by stiff structures, one needs to define the system-level damping based upon the damping information of components. This is frequently done in practice using approximate methods expressed as composite modal damping with weighting functions. However, when the difference in damping among components is substantial, the composite modal damping may become inappropriate in the characterization of the damping behavior of such systems. In recent years, several new methods have emerged with the expectation that they could produce more exact system-level damping for a group of nonclassically damped structures which are comprised of components that possess classical modal damping. In this paper, an overview is presented to examine these methods in the light of their theoretical basis, the technical merits, and practical applications. To this end, a synthesis method is described, which was shown to reduce to the other methods in the literature
Exploring damping characteristics of composite tower of cable ...
Indian Academy of Sciences (India)
SHEHATA E ABDEL RAHEEM
]. Characterization of damping forces in a vibrating structure has long been an active area of research in structural dynamics [5, 6, 11–18]. There are many situations in which the un-damped and classically damped assumptions are invalid.
Quantum mechanical theory of collisional recombination rates
International Nuclear Information System (INIS)
Miller, W.H.
1995-01-01
Quantum mechanical expressions for the pressure-dependent recombination rate (within the strong collision assumption) are presented which have a very similar form to those developed recently for rate constants of chemical reactions: eqs. 11 and 12 express the recombination rate in terms of a flux autocorrelation function, and eqs. 14-16 in terms of a cumulative recombination probability. The qualitative behavior of these functions is illustrated by several pedagogical examples. 24 refs., 1 fig
Nonlinear Electron Waves in Strongly Magnetized Plasmas
DEFF Research Database (Denmark)
Pécseli, Hans; Juul Rasmussen, Jens
1980-01-01
Weakly nonlinear dispersive electron waves in strongly magnetized plasma are considered. A modified nonlinear Schrodinger equation is derived taking into account the effect of particles resonating with the group velocity of the waves (nonlinear Landau damping). The possibility of including the ion...
Damping mechanisms in high-Q micro and nanomechanical string resonators
DEFF Research Database (Denmark)
Schmid, Silvan; Jensen, K. D.; Nielsen, K. H.
2011-01-01
been concluded that Q is enhanced due to the high energy stored in the string tension. In this paper, damping mechanisms in string resonators are systematically investigated by varying the geometry and the tensile stress of silicon nitride microstrings. The measured quality factors are compared...... to an analytical model for Q based on bending-related damping mechanisms. It is shown that internal material damping is limiting the quality factor of narrow strings with a width of 3 μm. Q is strongly width dependent and clamping losses evidently seem to be the limiting damping mechanism for wider strings....... It is further shown that Q is influenced by interference effects in the substrate and thus by the clamping of the macroscopic chip. A maximum quality factor of up to 7 million is presented for high-stress silicon nitride strings with a resonance frequency of 176 kHz....
Composition of homogeneous quasi-stationary nitrogen arc plasma by collisional-radiative model
International Nuclear Information System (INIS)
Habib, A.
2009-01-01
A collisional-radiative model (CRM) is developed to study nitrogen arc plasma. The model is based on solution of the rate equations of ν species chosen for the study. The species chosen are: electrons e, atomic ions N + , atoms N, diatomic molecules N 2 , and molecular ions N 2 + , we have then ν=5 species. The CRM is applied to homogeneous and quasi-stationary state (HQSS) plasma for electron temperature T e upto 12 000 K. All heavy particles are assumed to have the same kinetic temperature T g such that T g =T e , this means the temperature of the all five species is identical and is called plasma temperature T. The total pressure of the plasma is considered between 1 and 4 atm. The plasma composition is calculated taking into account all significant collisional and radiative mechanisms. The local effect of radiation absorption is described by the optical escape factors Λ j and Λ jk for free-bound and bound-bound transitions. Results show significant deviation from local thermodynamic equilibrium (LTE). It was also shown that the plasma pressure p has a strong influence on deviation from LTE. To assess the relative speeds of recombination reactions in nitrogen arc plasma we have calculated the relaxation time τ (or time constant) as a function of temperature.
Landau damping via the harmonic sextupole
Directory of Open Access Journals (Sweden)
Lidia Tosi
2003-05-01
Full Text Available Multibunch instabilities of a storage ring electron beam occur due to coherent particle oscillations generated through a bunch to bunch coupling via the impedances, deteriorating the beam quality. One cure for multibunch instabilities is Landau damping, i.e., introducing a spread in the oscillation frequencies among the particles of the individual bunches in order to destroy the coherence of the coupled multibunch oscillation. Measurements at ELETTRA have shown that the harmonic sextupole provides Landau damping capable of suppressing transverse multibunch instabilities. The damping is induced by the nonlinear tune spread with amplitude among the electrons within the individual bunches.
A Resonant Damping Study Using Piezoelectric Materials
Min, J. B.; Duffy, K. P.; Choi, B. B.; Morrison, C. R.; Jansen, R. H.; Provenza, A. J.
2008-01-01
Excessive vibration of turbomachinery blades causes high cycle fatigue (HCF) problems requiring damping treatments to mitigate vibration levels. Based on the technical challenges and requirements learned from previous turbomachinery blade research, a feasibility study of resonant damping control using shunted piezoelectric patches with passive and active control techniques has been conducted on cantilever beam specimens. Test results for the passive damping circuit show that the optimum resistive shunt circuit reduces the third bending resonant vibration by almost 50%, and the optimum inductive circuit reduces the vibration by 90%. In a separate test, active control reduced vibration by approximately 98%.
Radiation damping of a polarizable particle
Novotny, Lukas
2017-09-01
A polarizable body moving in an external electromagnetic field will slow down. This effect is referred to as radiation damping and is analogous to Doppler cooling in atomic physics. Using the principles of special relativity we derive an expression for the radiation damping force and find that it solely depends on the scattered power. The cooling of the particle's center-of-mass motion is balanced by heating due to radiation pressure shot noise, giving rise to an equilibrium that depends on the ratio of the field's frequency and the particle's mass. While damping is of relativistic nature, heating has its roots in quantum mechanics.
Physics of Collisional Plasmas Introduction to High-Frequency Discharges
Moisan, Michel
2012-01-01
The Physics of Collisional Plasmas deals with the plasma physics of interest to laboratory research and industrial applications, such as lighting, fabrication of microelectronics, destruction of greenhouse gases. Its emphasis is on explaining the physical mechanisms, rather than the detailed mathematical description and theoretical analysis. At the introductory level, it is important to convey the characteristic physical phenomena of plasmas, before addressing the ultimate formalism of kinetic theory, with its microscopic, statistical mechanics approach. To this aim, this text translates the physical phenomena into more tractable equations, using the hydrodynamic model; this considers the plasma as a fluid, in which the macroscopic physical parameters are the statistical averages of the microscopic (individual) parameters. This book is an introduction to the physics of collisional plasmas, as opposed to plasmas in space. It is intended for graduate students in physics and engineering . The first chapter intr...
ADAS tools for collisional-radiative modelling of molecules
Guzmán, F.; O'Mullane, M.; Summers, H. P.
2013-07-01
New theoretical and computational tools for molecular collisional-radiative models are presented. An application to the hydrogen molecule system has been made. At the same time, a structured database has been created where fundamental cross sections and rates for individual processes as well as derived data (effective coefficients) are stored. Relative populations for the vibrational states of the ground electronic state of H2 are presented and this vibronic resolution model is compared electronic resolution where vibronic transitions are summed over vibrational sub-states. Some new reaction rates are calculated by means of the impact parameter approximation. Computational tools have been developed to automate process and simplify the data assembly. Effective (collisional-radiative) rate coefficients versus temperature and density are presented.
Collisional Dynamics around Binary Black Holes in Galactic Centers
Hemsendorf, Marc; Sigurdsson, Steinn; Spurzem, Rainer
2002-12-01
We follow the sinking of two massive black holes in a spherical stellar system where the black holes become bound under the influence of dynamical friction. Once bound, the binary hardens by three-body encounters with surrounding stars. We find that the binary wanders inside the core, providing an enhanced supply of reaction partners for the hardening. The binary evolves into a highly eccentric orbit leading to coalescence well beyond a Hubble time. These are the first results from a hybrid ``self-consistent field'' (SCF) and direct Aarseth N-body integrator (NBODY6), which combines the advantages of the direct force calculation with the efficiency of the field method. The code is designed for use on parallel architectures and is therefore applicable to collisional N-body integrations with extraordinarily large particle numbers (>105). This creates the possibility of simulating the dynamics of both globular clusters with realistic collisional relaxation and stellar systems surrounding supermassive black holes in galactic nuclei.
Double layers in a modestly collisional electronegative discharge
Sheridan, T E
1999-01-01
The effect of ion-neutral collisions on the structure and ion flux emanating from a steady-state, planar discharge with two negative components is investigated. The positive ion component is modelled as a cold fluid subject to constant-mobility collisions, while the electrons and negative ions obey Boltzmann relations. The model includes the collisionless limit. When the negative ions are sufficiently cold three types of discharge structures are found. For small negative ion concentrations or high collisionality, the discharge is 'stratified', with an electronegative core and an electropositive edge. For the opposite conditions, the discharge is 'uniform' with the negative ion density remaining significant at the edge of the plasma. Between these cases lies the special case of a double-layer-stratified discharge, where quasi-neutrality is violated at the edge of the electronegative core. Double-layer-stratified solutions are robust in that they persist for moderate collisionality. Numerical solutions for fini...
DEFF Research Database (Denmark)
Bornehag, Carl-Gustaf; Sundell, Jan; Hagerhed, L.
2002-01-01
-sectional questionnaire study on 14 077 children (1-6 years) focusing on their health and their home environment. There were strong and consistent associations between different "dampness"-indicators and symptoms among children. The combination of floor moisture problems and PVC as flooring material significantly...
Numerical methods for plasma physics in collisional regimes
Dimarco, Giacomo; Li, Qin; Pareschi, Lorenzo; Yan, Bokai
2015-01-01
International audience; We consider the development of accurate and efficient numerical methods for the solution of the Vlasov-Landau equation describing a collisional plasma. The methods combine a Lagrangian approach for the Vlasov solver with a fast spectral method for the solution of the Landau operator. To this goal new modified spectral methods for the Landau integral which are capable to capture correctly the Maxwellian steady state are introduced. A particular care is devoted to the co...
Collisional Radiative Models for non-Maxwellian plasmas
Hartgers, Bart; van Dijk, Jan; van der Mullen, Joost
1999-10-01
Collisional Radiative models are a useful tool for studying plasmas. In their simplest form, they are used to calculate an atomic state distribution function (ASDF) from given electron and neutral densities and an electron temperature. Additionally, global ionization and recombination coefficients can be calculated as a function of electron density and temperature. In turn, these coefficients are used as input for the general plasma model
SCROLL, a superconfiguration collisional radiative model with external radiation
International Nuclear Information System (INIS)
Bar-Shalom, A.; Oreg, J.; Klapisch, M.
2000-01-01
A collisional radiative model for calculating non-local thermodynamical-equilibrium (non-LTE) spectra of heavy atoms in hot plasmas has been developed. It takes into account the numerous excited an autoionizing states by using superconfigurations. These are split systematically until the populations converge. The influence of an impinging radiation field has recently been added to the model. The effect can be very important. (author)
Multiplex detection of collisional energy transfer using KCSFI.
Frerichs, Heiko; Lenzer, Thomas; Luther, Klaus; Schwarzer, Dirk
2005-02-21
A new detection method for obtaining collisional transition probabilities P(E',E) of highly vibrationally excited molecules in the gas phase is presented. The technique employs energy-selective probing of the time-dependent vibrational population distribution by "kinetically controlled selective fluorescence (KCSF)". We present experimental results for a test system, the collisional deactivation of toluene by argon, where we use the well-known "kinetically controlled selective ionization (KCSI)" scheme as a reference for comparison. A newly designed setup is employed that allows simultaneous detection of fluorescence and ionization signals under identical experimental conditions ("kinetically controlled selective fluorescence and ionization = KCSFI"). For the system toluene + argon it is demonstrated that KCSF and KCSI yield identical results. A rate-equation model is presented to understand common features and differences of both approaches. The fluorescence detection scheme shows promise for future investigations on collisional energy transfer. The experimental setup is simpler, because it requires no additional ionization wavelength. This will hopefully give access to the P(E',E) of systems where, e.g., ionization schemes are difficult to implement due to short wavelengths required for the ionization step. A few examples will be outlined briefly.
Eigensolutions of non-proportionally damped systems based on continuous damping sensitivity
Lázaro, Mario
2016-02-01
The viscous damping model has been widely used to represent dissipative forces in structures under mechanical vibrations. In multiple degree of freedom systems, such behavior is mathematically modeled by a damping matrix, which in general presents non-proportionality, that is, it does not become diagonal in the modal space of the undamped problem. Eigensolutions of non-proportional systems are usually estimated assuming that the modal damping matrix is diagonally dominant (neglecting the off-diagonal terms) or, in the general case, using the state-space approach. In this paper, a new closed-form expression for the complex eigenvalues of non-proportionally damped system is proposed. The approach is derived assuming small damping and involves not only the diagonal terms of the modal damping matrix, but also the off-diagonal terms, which appear under higher order. The validity of the proposed approach is illustrated through a numerical example.
Piezoelectric RL shunt damping of flexible structures
DEFF Research Database (Denmark)
Høgsberg, Jan Becker; Krenk, Steen
2015-01-01
Resonant RL shunt circuits represent a robust and effective approach to piezoelectric damping, provided that the individual shunt circuit components are calibrated accurately with respect to the dynamic properties of the corresponding flexible structure. The balanced calibration procedure applied...
Multiple nucleon transfer in damped nuclear collisions
International Nuclear Information System (INIS)
Randrup, J.
1979-07-01
This lecture discusses a theory for the transport of mass, charge, linear, and angular momentum and energy in damped nuclear collisions, as induced by multiple transfer of individual nucleons. 11 references
Offline software for the DAMPE experiment
Wang, Chi; Liu, Dong; Wei, Yifeng; Zhang, Zhiyong; Zhang, Yunlong; Wang, Xiaolian; Xu, Zizong; Huang, Guangshun; Tykhonov, Andrii; Wu, Xin; Zang, Jingjing; Liu, Yang; Jiang, Wei; Wen, Sicheng; Wu, Jian; Chang, Jin
2017-10-01
A software system has been developed for the DArk Matter Particle Explorer (DAMPE) mission, a satellite-based experiment. The DAMPE software is mainly written in C++ and steered using a Python script. This article presents an overview of the DAMPE offline software, including the major architecture design and specific implementation for simulation, calibration and reconstruction. The whole system has been successfully applied to DAMPE data analysis. Some results obtained using the system, from simulation and beam test experiments, are presented. Supported by Chinese 973 Program (2010CB833002), the Strategic Priority Research Program on Space Science of the Chinese Academy of Science (CAS) (XDA04040202-4), the Joint Research Fund in Astronomy under cooperative agreement between the National Natural Science Foundation of China (NSFC) and CAS (U1531126) and 100 Talents Program of the Chinese Academy of Science
Damping of wind turbine tower vibrations
DEFF Research Database (Denmark)
Brodersen, Mark Laier; Pedersen, Mikkel Melters
Damping of wind turbine vibrations by supplemental dampers is a key ingredient for the continuous use of monopiles as support for offshore wind turbines. The present thesis consists of an extended summary with four parts and appended papers [P1-P4] concerning novel strategies for damping of tower...... in a stroke amplifying brace, which amplifies the displacement across the damper and thus reduces the desired level of damper force. For optimal damping of the two lowest tower modes, a novel toggle-brace concept for amplifying the bending deformation of the tower is presented. Numerical examples illustrate...... damper with IFFis validated by a series of real time hybrid simulations (RTHS). The experimental results illustrate the ability of the hybrid damper concept to increase damper stroke or attainable damping. The results also show that the actuator signal is quitesensitive to drift due an offset...
Damping elastic oscillations of digging mechanism
Kuznetsov, N. K.; Makhno, D. E.; Iov, I. A.
2017-10-01
The article studies methods for reducing dynamic loading and elastic oscillations of excavator buckets using dampers. The authors suggest a structural scheme for damping bucket oscillations using a damping device installed in a running gear of the traction cable. The results of numerical efficiency simulation are presented. The article shows that the system helps to reduce intensity of elastic oscillations and a transition period in acceleration and deceleration modes.
CLIC Waveguide Damped Accelerating Structure Studies
Dehler, M; Wuensch, Walter
1996-01-01
Studies of waveguide damped 30 GHz accelerating structures for multibunching in CLIC are described. Frequency discriminated damping using waveguides with a lowest cutoff frequency above the fundamental but below the higher order modes was considered. The wakefield behavior was investigated using time domain MAFIA computations over up to 20 cells and for frequencies up to 150 GHz. A configuration consisting of four T-cross-sectioned waveguides per cell reduces the transverse wake below 1% at typical CLIC bunch spacings.
Bryan's effect and anisotropic nonlinear damping
Joubert, Stephan V.; Shatalov, Michael Y.; Fay, Temple H.; Manzhirov, Alexander V.
2018-03-01
In 1890, G. H. Bryan discovered the following: "The vibration pattern of a revolving cylinder or bell revolves at a rate proportional to the inertial rotation rate of the cylinder or bell." We call this phenomenon Bryan's law or Bryan's effect. It is well known that any imperfections in a vibratory gyroscope (VG) affect Bryan's law and this affects the accuracy of the VG. Consequently, in this paper, we assume that all such imperfections are either minimised or eliminated by some known control method and that only damping is present within the VG. If the damping is isotropic (linear or nonlinear), then it has been recently demonstrated in this journal, using symbolic analysis, that Bryan's law remains invariant. However, it is known that linear anisotropic damping does affect Bryan's law. In this paper, we generalise Rayleigh's dissipation function so that anisotropic nonlinear damping may be introduced into the equations of motion. Using a mixture of numeric and symbolic analysis on the ODEs of motion of the VG, for anisotropic light nonlinear damping, we demonstrate (up to an approximate average), that Bryan's law is affected by any form of such damping, causing pattern drift, compromising the accuracy of the VG.
Collisional-radiative model for the visible spectrum of W{sup 26+} ions
Energy Technology Data Exchange (ETDEWEB)
Ding, Xiaobin, E-mail: dingxb@nwnu.edu.cn [Key Laboratory of Atomic and Molecular Physics and Functional Materials of Gansu Province, College of Physics and Electronic Engineering, Northwest Normal University, Lanzhou 730070 (China); Liu, Jiaxin [Key Laboratory of Atomic and Molecular Physics and Functional Materials of Gansu Province, College of Physics and Electronic Engineering, Northwest Normal University, Lanzhou 730070 (China); Koike, Fumihiro [Department of Physics, Sophia University, Tokyo, 102-8554 (Japan); Murakami, Izumi; Kato, Daiji; Sakaue, Hiroyuki A. [National Institute for Fusion Science, Toki, Gifu 509-5292 (Japan); Nakamura, Nobuyuki [Institute for Laser Science, The University of Electro-Communications, Chofu, Tokyo 182-8585 (Japan); Dong, Chenzhong [Key Laboratory of Atomic and Molecular Physics and Functional Materials of Gansu Province, College of Physics and Electronic Engineering, Northwest Normal University, Lanzhou 730070 (China)
2016-02-22
Plasma diagnostics in magnetic confinement fusion plasmas by using visible spectrum strongly depends on the knowledge of fundamental atomic properties. A detailed collisional-radiative model of W{sup 26+} ions has been constructed by considering radiative and electron excitation processes, in which the necessary atomic data had been calculated by relativistic configuration interaction method with the implementation of Flexible Atomic Code. The visible spectrum observed at an electron beam ion trap (EBIT) in Shanghai in the range of 332 nm to 392 nm was reproduced by present calculations. Some transition pairs of which the intensity ratio is sensitive to the electron density were selected as potential candidates of plasma diagnostics. Their electron density dependence is theoretically evaluated for the cases of EBIT plasmas and magnetic confinement fusion plasmas.
Damping Estimation Using Free Decays and Ambient Vibration Tests
DEFF Research Database (Denmark)
Magalhães, Filipe; Brincker, Rune; Cunha, Álvaro
2007-01-01
The accurate identification of modal damping ratios of Civil Engineering structures is a subject of major importance, as the amplitude of structural vibrations in resonance is inversely proportional to these coefficients. Their experimental identification can be performed either from ambient...... vibration or from free vibration tests. In the last case, the structural response after application of an impulse or after the application of harmonic loads can be used. Ambient vibration tests have the strong advantage of being more practical and economical. However, recent applications of both approaches...
Spectral damping scaling factors for shallow crustal earthquakes in active tectonic regions
Rezaeian, Sanaz; Bozorgnia, Yousef; Idriss, I.M.; Campbell, Kenneth; Abrahamson, Norman; Silva, Walter
2012-01-01
Ground motion prediction equations (GMPEs) for elastic response spectra, including the Next Generation Attenuation (NGA) models, are typically developed at a 5% viscous damping ratio. In reality, however, structural and non-structural systems can have damping ratios other than 5%, depending on various factors such as structural types, construction materials, level of ground motion excitations, among others. This report provides the findings of a comprehensive study to develop a new model for a Damping Scaling Factor (DSF) that can be used to adjust the 5% damped spectral ordinates predicted by a GMPE to spectral ordinates with damping ratios between 0.5 to 30%. Using the updated, 2011 version of the NGA database of ground motions recorded in worldwide shallow crustal earthquakes in active tectonic regions (i.e., the NGA-West2 database), dependencies of the DSF on variables including damping ratio, spectral period, moment magnitude, source-to-site distance, duration, and local site conditions are examined. The strong influence of duration is captured by inclusion of both magnitude and distance in the DSF model. Site conditions are found to have less significant influence on DSF and are not included in the model. The proposed model for DSF provides functional forms for the median value and the logarithmic standard deviation of DSF. This model is heteroscedastic, where the variance is a function of the damping ratio. Damping Scaling Factor models are developed for the “average” horizontal ground motion components, i.e., RotD50 and GMRotI50, as well as the vertical component of ground motion.
Collisional interactions in isotope and spin mixtures of laser-cooled metastable neon atoms
International Nuclear Information System (INIS)
Schuetz, Jan
2013-01-01
Laser-cooled metastable neon atoms (Ne * ) present a fascinating atomic system: The extremely low kinetic energy of the cold atoms stands in strong contrast to the large internal energy of the metastable state 3 P 2 and leads to unique collisional interaction properties that are dominated by ionizing collisions. In this work, experimental investigations of the collisional interactions of Ne * are presented. In particular, collisional interactions in isotope mixtures and in mixtures of different Zeeman sublevels (vertical stroke m J right angle) are studied. With a lifetime of 14.7s, the metastable state 3 P 2 serves as an effective ground state for the laser manipulation. The Ne * atoms are cooled down to a temperature of several 100μK using laser cooling techniques and stored in a magneto optical or magnetic trap. The cold, trapped atoms can then be used for experiments. In order to cool and trap isotope mixtures, the isotope shift of the atomic transition 3 P 2 3 D 3 that is used for laser manipulation has to be known with high precision. In this work, the shift of the transition between the isotopes 20 Ne, 21 Ne, and 22 Ne has been measured and, using the advantages of laser-cooled atoms, the accuracy of the measurement was improved by one order of magnitude compared to previous measurements. For 21 Ne also the hyperfine interaction constants of the state 3 D 3 for magnetic dipole and electric quadrupole interaction have been measured. The collisional interactions of spin-polarized Ne * in all two-isotope mixtures of 20 Ne, 21 Ne, and 22 Ne have been investigated. The investigations are focused on the question whether the heteronuclear collisional interactions are favorable for sympathetic cooling. Rate coefficients for heteronuclear ionizing collisions and upper bounds for heteronuclear thermal relaxation cross sections have been measured. In all cases, the measured ratio of elastic to inelastic collisions is not favorable for heteronuclear sympathetic cooling
International Nuclear Information System (INIS)
Shaharun, M A; Yusoff, A R; Reza, M S; Jalal, K A
2012-01-01
Titanium is a strong, lustrous, corrosion-resistant and transition metal with a silver color to produce strong lightweight alloys for industrial process, automotive, medical instruments and other applications. However, it is very difficult to machine the titanium due to its poor machinability. When machining titanium alloys with the conventional tools, the wear rate of the tool is rapidly accelerate and it is generally difficult to achieve at high cutting speed. In order to get better understanding of machining titanium alloy, the interaction between machining structural system and the cutting process which result in machining instability will be studied. Process damping is a useful phenomenon that can be exploited to improve the limited productivity of low speed machining. In this study, experiments are performed to evaluate the performance of process damping of milling under different tool helix geometries. The results showed that the helix of 42° angle is significantly increase process damping performance in machining titanium alloy.
Damping and fluidelastic instability in two-phase cross-flow heat exchanger tube arrays
Moran, Joaquin E.
flux, and its dependency is a function of void fraction. A dimensional analysis was carried out to investigate the relationship between damping and two-phase flow related parameters. As a result, the inclusion of surface tension in the form of the Capillary number appears to be useful when combined with the two-phase component of the damping ratio (interfacial damping). A strong dependence of damping on flow regime was observed when plotting the interfacial damping versus the void fraction, introducing an improvement over the previous result obtained by normalizing the two-phase damping, which does not exhibit this behaviour. The interfacial velocity model was selected to represent the fluidelastic data in two-phase experiments, due to the inclusion of the tube array geometry and density ratio effects, which does not exist for the pitch velocity approach. An essential component in reliably establishing the velocity threshold for fluidelastic instability, is a measure of the energy dissipation available in the system to balance the energy input from the flow. The present analysis argues that the damping in-flow is not an appropriate measure and demonstrates that the use of quiescent fluid damping provides a better measure of the energy dissipation, which produces a much more logical trend in the stability behaviour. This value of damping, combined with the RAD density and the interfacial velocity, collapses the available data well and provides the expected trend of two-phase flow stability data over the void fraction range from liquid to gas flows. The resulting stability maps represent a significant improvement over existing maps for predicting fluidelastic instability of tube bundles in two-phase flows. This result also tends to confirm the hypothesis that the basic mechanism of fluidelastic instability is the same for single and two-phase flows.
Susceptibility for cigarette smoke-induced DAMP release and DAMP-induced inflammation in COPD
Pouwels, Simon D.; Hesse, Laura; Faiz, Alen; Lubbers, Jaap; Bodha, Priya K.; ten Hacken, Nick H. T.; van Oosterhout, Antoon J. M.; Nawijn, Martijn C.; Heijink, Irene H.
2016-01-01
Cigarette smoke (CS) exposure is a major risk factor for chronic obstructive pulmonary disease (COPD). We investigated whether CS-induced damage-associated molecular pattern (DAMP) release or DAMP-mediated inflammation contributes to susceptibility for COPD. Samples, including bronchial brushings,
Allergy and respiratory health effects of dampness and dampness-related agents in schools and homes
DEFF Research Database (Denmark)
Holst, G; Høst, A; Doekes, G
2016-01-01
), forced vital capacity (zFVC) and the ratio zFEV1 /zFVC using GLI-2012-prediction-equations. The parents reported children's allergies, airway symptoms and doctor-diagnosed asthma. High classroom dampness, but not bedroom dampness, was negatively associated with zFEV1 (β-coef. -0.71; 95%CI -1.17 - -0...
Damping of Inter-Area Low Frequency Oscillation Using an Adaptive Wide-Area Damping Controller
DEFF Research Database (Denmark)
Yao, Wei; Jiang, L.; Fang, Jiakun
2013-01-01
This paper presents an adaptive wide-area damping controller (WADC) based on generalized predictive control (GPC) and model identification for damping the inter-area low frequency oscillations in large-scale inter-connected power system. A recursive least-squares algorithm (RLSA) with a varying f...
Collisional effects in He I lines and helium abundances in planetary nebulae
International Nuclear Information System (INIS)
Clegg, R.E.S.
1987-01-01
Attention is drawn to new, 19-state quantal calculations for collisional excitation by electron impact in neutral helium. Recommended empirical formulae are given for the collisional contribution to HeI recombination lines such as λλ4471, 5876 A in gaseous nebulae. Collisional ionization of metastable (2 3 S) He I is significant for high-temperature nebulae. Collisional transfers provide significant cooling in nebulae with low heavy-element abundances. Revised mean He/H ratios for three large samples of planetary nebulae are given. (author)
Fractionation of hydrogen and deuterium on Venus due to collisional ejection
Gurwell, Mark A.; Yung, Yuk L.
1993-01-01
The collisional ejection process for hydrogen on Venus is reanalyzed. Improved values for the efficiency of H and D escape as a function of the ionospheric temperature are reported. It is proposed that the reduction of the hydrogen flux for collisional ejection be reduced from 8 to 3.5 x 10 exp 6/sq cm/s, and a revised D/H fractional factor of 0.47 due to collisional ejection is suggested. The resulting deuterium flux is 3.1 x 10 exp 4/sq cm/s, roughly six times the flux due to charge exchange, making collisional ejection the dominant escape mechanism for deuterium on Venus.
Directory of Open Access Journals (Sweden)
Jiangkun Sun
2018-03-01
Full Text Available The damping asymmetry of cylindrical resonators is one of the major sources which result in the gyroscope’s drift. In this paper, a new approach for trimming the damping asymmetry of cylindrical resonators is proposed. The damping asymmetry trimming model is established to analyze the additional damping’s influences. Furthermore, piezoelectric electrodes’ effects on the cylindrical resonator’s damping characteristic are figured out through the finite element simulation. The procedures of this trimming method are also summarized based on theoretical analysis. At last, these theoretical analysis and simulation results are utilized to compensate the damping asymmetry of cylindrical resonators and the procedures of this trimming method are also summarized. Experiments are also implemented to verify this trimming method.
A Collisional Origin to Earth's Non-chondritic Composition?
Bonsor, Amy; Leinhardt, Zoë M.; Carter, Philip J.; Elliott, Tim; Walter, Michael J.; Stewart, Sarah T.
2014-01-01
Several lines of evidence indicate a non-chondritic composition for Bulk Earth. If Earth formed from the accretion of chondritic material, its non-chondritic composition, in particular the super-chondritic 142Nd/144Nd and low Mg/Fe ratios, might be explained by the collisional erosion of differentiated planetesimals during its formation. In this work we use an N-body code, that includes a state-of-the-art collision model, to follow the formation of protoplanets, similar to proto-Earth, from d...
Measurement of the Transverse Spitzer Resistivity during Collisional Magnetic Reconnection
International Nuclear Information System (INIS)
Trintchouk, F.; Yamada, M.; Ji, H.; Kulsrud, R.M.; Carter, T.A.
2000-01-01
Measurement of the transverse resistivity was carried out in a reconnecting current sheet where the mean free path for the Coulomb collision is smaller than the thickness of the sheet. In a collisional neutral sheet without a guide field, the transverse resistivity is directly related to the reconnection rate. A remarkable agreement is found between the measured resistivity and the classical value derived by L. Spitzer. In his calculation the transverse resistivity for the electrons is higher than the parallel resistivity by a factor of 1.96. The measured values have verified this theory to within 30% errors
Simulations of transient collisional x-ray lasers
International Nuclear Information System (INIS)
Sasaki, Akira; Utsumi, Takayuki; Moribayashi, Kengo; Kado, Masataka; Kawachi, Tetsuya
2000-01-01
We have developed an atomic kinetics model of transient collisionally excited x-ray lasers by integrating a detailed model for the Ni-like ion based on the atomic data calculated by the HULLAC code, and an averaged model using super levels for a wide range of charge states. Calculations of the temporal and spatial evolution of the gain of the Ni-like Ag laser are carried out using this code as a postprocessor of 1-dimensional hydrodynamics code to show qualitative agreement with experiments
Anti-damping effect of radiation reaction
International Nuclear Information System (INIS)
Wang, G; Yuan, X Z; Li, H; Shen, Y F; Zi, J
2010-01-01
The anti-damping effect of radiation reaction, which means the radiation reaction does non-negative work on a radiating charge, is investigated at length by using the Lorentz-Dirac equation (LDE) for the motion of a point charge respectively acted on by (a) a pure electric field, (b) a pure magnetic field and (c) the fields of an electromagnetic wave. We found that the curvature of the charge's trajectory plays an important role in the radiation reaction force, and the anti-damping effect cannot take place for the real macroscopic motions of a point charge. The condition for this anti-damping effect to take place is that the gradient of the external force field must exceed a certain value over the region of magnitude of the classical radius of massive charges (∼10 -15 m). Our results are potentially helpful to lessen the controversy on LDE and justify it as the correct classical equation describing the radiating charge's motion. If this anti-damping effect of LDE were a real existing physical process, it could serve as a mechanism within the context of classical electrodynamics for the stability of hydrogen atoms. Using the picture of an electron in quantum electrodynamics, namely the negative bare charge surrounded by the polarized positive charges of vacuum, we can obtain a reasonable explanation for the energy transferred to the electron during the occurrence of the anti-damping effect, on which the venerable work of Wheeler and Feynman has thrown some light.
Damping modification factors for acceleration response spectra
Directory of Open Access Journals (Sweden)
Heng Li
2017-09-01
Full Text Available DMF (Damping modification factors are used to modify elastic response spectral values corresponding to damping ratio 5% to other damping levels. The influence of seismological parameters (magnitude, epicentral distances and site conditions on DMF for acceleration spectra was analysed. The results show that for a given period as the magnitude or distance increase, the effect of damping on the seismic response will also increase, which indicates the response reduction from the structural damping will become more efficient. In the near-field of small earthquakes, the influence of site conditions on DMF is obvious, but it does not show a consistent rule. Furthermore, the DMF corresponding to different site conditions gradually close to unity with increasing magnitude and distance. The influence of the above mentioned parameters is related to the relative attenuation of the frequency components of the ground motion. The attenuation index alone is sufficient to take into account the influence. Based on these features, this paper proposes a formula of DMF for acceleration response spectra.
On Landau damping of dipole modes by non-linear space charge and octupoles
Möhl, D
1995-01-01
The joint effect of space-charge non-linearities and octupole lenses is important for Landau damping of coherent instabilities. The octupole strength required for stabilisation can depend strongly on the sign of the excitation current of the lenses. This note tries to extend results, previously obtained for coasting beams and rigid bunches, to more general head--tail modes.
Passively damped vibration welding system and method
Tan, Chin-An; Kang, Bongsu; Cai, Wayne W.; Wu, Tao
2013-04-02
A vibration welding system includes a controller, welding horn, an anvil, and a passive damping mechanism (PDM). The controller generates an input signal having a calibrated frequency. The horn vibrates in a desirable first direction at the calibrated frequency in response to the input signal to form a weld in a work piece. The PDM is positioned with respect to the system, and substantially damps or attenuates vibration in an undesirable second direction. A method includes connecting the PDM having calibrated properties and a natural frequency to an anvil of an ultrasonic welding system. Then, an input signal is generated using a weld controller. The method includes vibrating a welding horn in a desirable direction in response to the input signal, and passively damping vibration in an undesirable direction using the PDM.
Minimum wakefield achievable by waveguide damped cavity
International Nuclear Information System (INIS)
Lin, X.E.; Kroll, N.M.
1995-01-01
The authors use an equivalent circuit to model a waveguide damped cavity. Both exponentially damped and persistent (decay t -3/2 ) components of the wakefield are derived from this model. The result shows that for a cavity with resonant frequency a fixed interval above waveguide cutoff, the persistent wakefield amplitude is inversely proportional to the external Q value of the damped mode. The competition of the two terms results in an optimal Q value, which gives a minimum wakefield as a function of the distance behind the source particle. The minimum wakefield increases when the resonant frequency approaches the waveguide cutoff. The results agree very well with computer simulation on a real cavity-waveguide system
GAP CLEARING BY PLANETS IN A COLLISIONAL DEBRIS DISK
Energy Technology Data Exchange (ETDEWEB)
Nesvold, Erika R. [Department of Physics, University of Maryland Baltimore County 1000 Hilltop Circle Baltimore, MD 21250 (United States); Kuchner, Marc J., E-mail: Erika.Nesvold@umbc.edu, E-mail: Marc.Kuchner@nasa.gov [NASA Goddard Space Flight Center Exoplanets and Stellar Astrophysics Laboratory, Code 667 Greenbelt, MD 21230 (United States)
2015-01-10
We apply our 3D debris disk model, SMACK, to simulate a planet on a circular orbit near a ring of planetesimals that are experiencing destructive collisions. Previous simulations of a planet opening a gap in a collisionless debris disk have found that the width of the gap scales as the planet mass to the 2/7th power (α = 2/7). We find that gap sizes in a collisional disk still obey a power law scaling with planet mass, but that the index α of the power law depends on the age of the system t relative to the collisional timescale t {sub coll} of the disk by α = 0.32(t/t {sub coll}){sup –0.04}, with inferred planet masses up to five times smaller than those predicted by the classical gap law. The increased gap sizes likely stem from the interaction between collisions and the mean motion resonances near the chaotic zone. We investigate the effects of the initial eccentricity distribution of the disk particles and find a negligible effect on the gap size at Jovian planet masses, since collisions tend to erase memory of the initial particle eccentricity distributions. Finally, we find that the presence of Trojan analogs is a potentially powerful diagnostic of planets in the mass range ∼1-10 M {sub Jup}. We apply our model to place new upper limits on planets around Fomalhaut, HR 4796 A, HD 202628, HD 181327, and β Pictoris.
Generation of Suprathermal Electrons by Collective Processes in Collisional Plasma
Tigik, S. F.; Ziebell, L. F.; Yoon, P. H.
2017-11-01
The ubiquity of high-energy tails in the charged particle velocity distribution functions (VDFs) observed in space plasmas suggests the existence of an underlying process responsible for taking a fraction of the charged particle population out of thermal equilibrium and redistributing it to suprathermal velocity and energy ranges. The present Letter focuses on a new and fundamental physical explanation for the origin of suprathermal electron velocity distribution function (EVDF) in a collisional plasma. This process involves a newly discovered electrostatic bremsstrahlung (EB) emission that is effective in a plasma in which binary collisions are present. The steady-state EVDF dictated by such a process corresponds to a Maxwellian core plus a quasi-inverse power-law tail, which is a feature commonly observed in many space plasma environments. In order to demonstrate this, the system of self-consistent particle- and wave-kinetic equations are numerically solved with an initially Maxwellian EVDF and Langmuir wave spectral intensity, which is a state that does not reflect the presence of EB process, and hence not in force balance. The EB term subsequently drives the system to a new force-balanced steady state. After a long integration period it is demonstrated that the initial Langmuir fluctuation spectrum is modified, which in turn distorts the initial Maxwellian EVDF into a VDF that resembles the said core-suprathermal VDF. Such a mechanism may thus be operative at the coronal source region, which is characterized by high collisionality.
Assessing Equivalent Viscous Damping Using Piping System test Results
Energy Technology Data Exchange (ETDEWEB)
Nie, J.; Morante, R.
2010-07-18
The specification of damping for nuclear piping systems subject to seismic-induced motions has been the subject of many studies and much controversy. Damping estimation based on test data can be influenced by numerous factors, consequently leading to considerable scatter in damping estimates in the literature. At present, nuclear industry recommendations and nuclear regulatory guidance are not consistent on the treatment of damping for analysis of nuclear piping systems. Therefore, there is still a need to develop a more complete and consistent technical basis for specification of appropriate damping values for use in design and analysis. This paper summarizes the results of recent damping studies conducted at Brookhaven National Laboratory.
Damping of Crank–Nicolson error oscillations
DEFF Research Database (Denmark)
Britz, Dieter; Østerby, Ole; Strutwolf, J.
2003-01-01
The Crank–Nicolson (CN) simulation method has an oscillatory response to sharp initial transients. The technique is convenient but the oscillations make it less popular. Several ways of damping the oscillations in two types of electrochemical computations are investigated. For a simple one...... be computationally more expensive with some systems. The simple device of starting with one backward implicit (BI, or Laasonen) step does damp the oscillations, but not always sufficiently. For electrochemical microdisk simulations which are two-dimensional in space and using CN, the use of a first BI step is much...
Wind turbine blade with viscoelastic damping
Sievers, Ryan A.; Mullings, Justin L.
2017-01-10
A wind turbine blade (60) damped by viscoelastic material (54, 54A-F) sandwiched between stiffer load-bearing sublayers (52A, 52B, 56A, 56B) in portions of the blade effective to damp oscillations (38) of the blade. The viscoelastic material may be located in one or more of: a forward portion (54A) of the shell, an aft portion (54D) of the shell, pressure and suction side end caps (54B) of an internal spar, internal webbing walls (54C, 54E), and a trailing edge core (54F).
Strengthening and damping of synchrotron oscillations
International Nuclear Information System (INIS)
Taratin, A.M.
2001-01-01
Resonance strengthening and damping of synchrotron oscillations of collider bunch halo particles was studied by simulation. It was shown that the strengthening of particle synchrotron oscillations can be highly efficient with using a resonance pulse sequence. The resonance damping of particle synchrotron oscillations is only possible when the inverse population of the accelerated bunch halo is realized. Resonance method of synchrotron oscillation strengthening can be used for the extraction of beam halo particles with a bent crystal to improve the background conditions for colliding beam experiments and to fulfill simultaneously some fixed target experiments
Seismic damage diagnosis of a masonry building using short-term damping measurements
Kouris, Leonidas Alexandros S.; Penna, Andrea; Magenes, Guido
2017-04-01
It is of considerable importance to perform dynamic identification and detect damage in existing structures. This paper describes a new and practical method for damage diagnosis of masonry buildings requiring minimum computational effort. The method is based on the relative variation of modal damping and validated against experimental data from a full scale two storey shake table test. The experiment involves a building subjected to uniaxial vibrations of progressively increasing intensity at the facilities of EUCENTRE laboratory (Pavia, Italy) up to a near collapse damage state. Five time-histories are applied scaling the Montenegro (1979) accelerogram. These strong motion tests are preceded by random vibration tests (RVT's) which are used to perform modal analysis. Two deterministic methods are applied: the single degree of freedom (SDOF) assumption together with the peak-picking method in the discrete frequency domain and the Eigen realisation algorithm with data correlations (ERA-DC) in the discrete time domain. Regarding the former procedure, some improvements are incorporated to locate rigorously the natural frequencies and estimate the modal damping. The progressive evolution of the modal damping is used as a key indicator to characterise damage on the building. Modal damping is connected to the structural mass and stiffness. A square integrated but only with two components expression for proportional (classical) damping is proposed to fit better with the experimental measurements of modal damping ratios. Using this Rayleigh order formulation the contribution of each of the damping components is evaluated. The stiffness component coefficient is proposed as an effective index to detect damage and quantify its intensity.
Rezaeian, Sanaz; Bozorgnia, Yousef; Idriss, I.M.; Abrahamson, Norman; Campbell, Kenneth; Silva, Walter
2014-01-01
Ground motion prediction equations (GMPEs) for elastic response spectra are typically developed at a 5% viscous damping ratio. In reality, however, structural and nonstructural systems can have other damping ratios. This paper develops a new model for a damping scaling factor (DSF) that can be used to adjust the 5% damped spectral ordinates predicted by a GMPE for damping ratios between 0.5% to 30%. The model is developed based on empirical data from worldwide shallow crustal earthquakes in active tectonic regions. Dependencies of the DSF on potential predictor variables, such as the damping ratio, spectral period, ground motion duration, moment magnitude, source-to-site distance, and site conditions, are examined. The strong influence of duration is captured by the inclusion of both magnitude and distance in the DSF model. Site conditions show weak influence on the DSF. The proposed damping scaling model provides functional forms for the median and logarithmic standard deviation of DSF, and is developed for both RotD50 and GMRotI50 horizontal components. A follow-up paper develops a DSF model for vertical ground motion.
Clustering of galaxies near damped Lyman-alpha systems with (z) = 2.6
Wolfe, A. M
1993-01-01
The galaxy two-point correlation function, xi, at (z) = 2.6 is determined by comparing the number of Ly-alpha-emitting galaxies in narrowband CCD fields selected for the presence of damped L-alpha absorption to their number in randomly selected control fields. Comparisons between the presented determination of (xi), a density-weighted volume average of xi, and model predictions for (xi) at large redshifts show that models in which the clustering pattern is fixed in proper coordinates are highly unlikely, while better agreement is obtained if the clustering pattern is fixed in comoving coordinates. Therefore, clustering of Ly-alpha-emitting galaxies around damped Ly-alpha systems at large redshifts is strong. It is concluded that the faint blue galaxies are drawn from a parent population different from normal galaxies, the presumed offspring of damped Ly-alpha systems.
Magnetic Anisotropy, Damping and Interfacial Spin Transport in Pt/LSMO Bilayers
Lee, Han Kyu
In this thesis, I describe ferromagnetic resonance measurements of magnetic anisotropy and damping in epitaxial La0.7Sr0.3MnO 3 (LSMO) and Pt capped LSMO thin films on SrTiO3 (001) substrates. The measurements reveal significant negative perpendicular magnetic anisotropy and a weaker uniaxial in-plane anisotropy that both are unaffected by the Pt cap. The Gilbert damping of the bare LSMO films is found to be low alpha = 1.9(1) x 10-3, and two-magnon scattering is determined to be significant and strongly anisotropic in the plane of the film. The Pt cap increases the damping by 50% due to spin pumping, which is also directly detected via inverse spin Hall effect in Pt. This work demonstrates efficient spin transport across the Pt/LSMO interface.
MOL-D: A Collisional Database and Web Service within the Virtual ...
Indian Academy of Sciences (India)
Page 1. Review. J. Astrophys. Astr., Vol. 36, No. 4, December 2015, pp. 693–703. MOL-D: A Collisional Database and Web Service within the Virtual. Atomic and Molecular Data Center. V. Vujcic1,∗, D. ... coefficients for specific collisional processes and a web service within the. Serbian Virtual Observatory (SerVO) and the ...
Dynamo transformation of the collisional R-T in a weakly ionized ...
Indian Academy of Sciences (India)
terms of dynamo transformation of neutral drag effect as a source to understand complete suppression of the usual collisional R-T and in turn linear driving of the NILF. It is therefore emphasized, worth calling it as the dynamo instability. Keywords. Ionosphere; mesosphere; partial ionization; irregularities; collisional; dynamo ...
Oxygen auroral transition laser system excited by collisional and photolytic energy transfer
International Nuclear Information System (INIS)
Murray, J.R.; Powell, H.T.; Rhodes, C.K.
1975-06-01
The properties of laser media involving the auroral transition of atomic oxygen and analogous systems are examined. A discussion of the atomic properties, collisional mechanisms, excitation processes, and collisionally induced radiative phenomena is given. Crossing phenomena play a particularly important role in governing the dynamics of the medium
Collisional excitation transfer between Rb(5P) states in 50–3000 Torr of 4He
International Nuclear Information System (INIS)
Sell, J F; Gearba, M A; Patterson, B M; Byrne, D; Jemo, G; Meeter, R; Knize, R J; Lilly, T C
2012-01-01
Measurements of the mixing rates and cross sections for collisional excitation transfer between the 5P 1/2 and 5P 3/2 states of rubidium (Rb) in the presence of 4 He buffer gas are presented. Selected pulses from a high repetition rate, mode-locked femtosecond laser are used to excite either Rb state with the fluorescence due to collisional excitation transfer observed by time-correlated single-photon counting. The time dependence of this fluorescence is fitted to the solution of rate equations which include the mixing rate, atomic lifetimes and any quenching processes. The variation in the mixing rate over a large range of buffer gas densities allows the determination of both the binary collisional transfer cross section and a three-body collisional transfer rate. We do not observe any collisional quenching effects at 4 He pressures up to 6 atm and discuss in detail other systematic effects considered in the experiment. (paper)
Resonant Electromagnetic Shunt Damping of Flexible Structures
DEFF Research Database (Denmark)
Høgsberg, Jan Becker
2016-01-01
resonance and a resistor to dissipate the correct amount of vibration energy. The modal interaction with residual vibration forms not targeted by the resonant shunt is represented by supplemental flexibility and inertia terms. This leads to modified calibration formulae that maintain the desired damping...
Rage mediated DAMP signaling in intestinal tumorigenesis
Heijmans, Jarom; Büller, Nikè V. J. A.; Muncan, Vanesa; van den Brink, Gijs R.
2012-01-01
In the intestine, a large variety of pathogen-associated molecular patterns (PAMPs) and damage-associated molecular patterns (DAMPs) can instigate innate immune responses, which have been shown to promote colorectal carcinogenesis. We have recently demonstrated an important role for the receptor for
Spatial Damping of Linear Compressional Magnetoacoustic Waves ...
Indian Academy of Sciences (India)
2016-01-27
Jan 27, 2016 ... We study the spatial damping of magnetoacoustic waves in an unbounded quiescent prominence invoking the technique of MHD seismology. We consider Newtonian radiation in the energy equation and derive a fourth order general dispersion relation in terms of wavenumber . Numerical solution of ...
The DAMPE silicon–tungsten tracker
Energy Technology Data Exchange (ETDEWEB)
Azzarello, P., E-mail: philipp.azzarello@unige.ch [Département de Physique Nucléaire et Corpusculaire, University of Geneva, Geneva (Switzerland); Ambrosi, G. [Istituto Nazionale di Fisica Nucleare Sezione di Perugia, Perugia (Italy); Asfandiyarov, R. [Département de Physique Nucléaire et Corpusculaire, University of Geneva, Geneva (Switzerland); Bernardini, P. [Dipartimento di Matematica e Fisica “E. De Giorgi”, Università del Salento, Lecce (Italy); Istituto Nazionale di Fisica Nucleare Sezione di Lecce, Lecce (Italy); Bertucci, B.; Bolognini, A. [Istituto Nazionale di Fisica Nucleare Sezione di Perugia, Perugia (Italy); Dipartimento di Fisica e Geologia, Università di Perugia, Perugia (Italy); Cadoux, F. [Département de Physique Nucléaire et Corpusculaire, University of Geneva, Geneva (Switzerland); Caprai, M. [Istituto Nazionale di Fisica Nucleare Sezione di Perugia, Perugia (Italy); De Mitri, I. [Dipartimento di Matematica e Fisica “E. De Giorgi”, Università del Salento, Lecce (Italy); Istituto Nazionale di Fisica Nucleare Sezione di Lecce, Lecce (Italy); Domenjoz, M. [Département de Physique Nucléaire et Corpusculaire, University of Geneva, Geneva (Switzerland); Dong, Y. [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing (China); Duranti, M. [Istituto Nazionale di Fisica Nucleare Sezione di Perugia, Perugia (Italy); Dipartimento di Fisica e Geologia, Università di Perugia, Perugia (Italy); Fan, R. [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing (China); and others
2016-09-21
The DArk Matter Particle Explorer (DAMPE) is a spaceborne astroparticle physics experiment, launched on 17 December 2015. DAMPE will identify possible dark matter signatures by detecting electrons and photons in the 5 GeV–10 TeV energy range. It will also measure the flux of nuclei up to 100 TeV, for the study of the high energy cosmic ray origin and propagation mechanisms. DAMPE is composed of four sub-detectors: a plastic strip scintillator, a silicon–tungsten tracker–converter (STK), a BGO imaging calorimeter and a neutron detector. The STK is composed of six tracking planes of 2 orthogonal layers of single-sided micro-strip detectors, for a total detector surface of ca. 7 m{sup 2}. The STK has been extensively tested for space qualification. Also, numerous beam tests at CERN have been done to study particle detection at silicon module level, and at full detector level. After description of the DAMPE payload and its scientific mission, we will describe the STK characteristics and assembly. We will then focus on some results of single ladder performance tests done with particle beams at CERN.
Spatial Damping of Linear Compressional Magnetoacoustic Waves ...
Indian Academy of Sciences (India)
by considering the effect of prominence-corona transition region (PCTR) and neglect- ing the adiabaticity. Terradas et al. (2005) investigated the damping of MHD waves in an inhomogeneous and bounded medium by neglecting the adiabaticity. They found out that only slow mode waves are affected leaving fast mode ...
Dry friction damping couple at high frequencies
Czech Academy of Sciences Publication Activity Database
Půst, Ladislav; Pešek, Luděk; Košina, Jan; Radolfová, Alena
2014-01-01
Roč. 8, č. 1 (2014), s. 91-100 ISSN 1802-680X Institutional support: RVO:61388998 Keywords : dry friction * damping * high frequencies Subject RIV: BI - Acoustics http://www.kme.zcu.cz/acm/acm/article/view/239/265
Mode damping in a commensurate monolayer solid
DEFF Research Database (Denmark)
Bruch, Ludwig Walter; Hansen, Flemming Yssing
1997-01-01
The normal modes of a commensurate monolayer solid may be damped by mixing with elastic waves of the substrate. This was shown by Hall, Mills, and Black [Phys. Rev. B 32, 4932 (1985)], for perpendicular adsorbate vibrations in the presence of an isotropic elastic medium. That work is generalized...
Vibration and Sound Damping in Polymers
Indian Academy of Sciences (India)
IAS Admin
The damping property of rubbers is utilized in products like vibration damper ... engineering rubber products used for vibration isolation. In Greek, .... Natural rubber. – 73. Poly(methyl methacrylate) 105. Butadiene rubber. – 100. Polycarbonate. 145. Silicone rubber. – 127. Polynorbornene. 215. Table 1. Comparing the Tg of.
Damping mechanisms and models in structural dynamics
DEFF Research Database (Denmark)
Krenk, Steen
2002-01-01
Several aspects of damping models for dynamic analysis of structures are investigated. First the causality condition for structural response is used to identify rules for the use of complex-valued frequency dependent material models, illustrated by the shortcomings of the elastic hysteretic model...
An Equivalent Circuit for Landau Damping
DEFF Research Database (Denmark)
Pécseli, Hans
1976-01-01
An equivalent circuit simulating the effect of Landau damping in a stable plasma‐loaded parallel‐plate capacitor is presented. The circuit contains a double infinity of LC components. The transition from stable to unstable plasmas is simulated by the introduction of active elements into the circuit....
Stiffness and damping in mechanical design
National Research Council Canada - National Science Library
Rivin, Eugene I
1999-01-01
... important conceptual issues are stiffness of mechanical structures and their components and damping in mechanical systems sensitive to and/or generating vibrations. Stiffness and strength are the most important criteria for many mechanical designs. However, although there are hundreds of books on various aspects of strength, and strength issues ar...
Damping of liquid sloshing by foams
Sauret, A.; Boulogne, F.; Cappello, J.; Dressaire, E.; Stone, H. A.
2015-02-01
When a container is set in motion, the free surface of the liquid starts to oscillate or slosh. Such effects can be observed when a glass of water is handled carelessly and the fluid sloshes or even spills over the rims of the container. However, beer does not slosh as readily as water, which suggests that foam could be used to damp sloshing. In this work, we study experimentally the effect on sloshing of a liquid foam placed on top of a liquid bath. We generate a monodisperse two-dimensional liquid foam in a rectangular container and track the motion of the foam. The influence of the foam on the sloshing dynamics is experimentally characterized: only a few layers of bubbles are sufficient to significantly damp the oscillations. We rationalize our experimental findings with a model that describes the foam contribution to the damping coefficient through viscous dissipation on the walls of the container. Then we extend our study to confined three-dimensional liquid foam and observe that the behavior of 2D and confined 3D systems are very similar. Thus, we conclude that only the bubbles close to the walls have a significant impact on the dissipation of energy. The possibility to damp liquid sloshing using foam is promising in numerous industrial applications such as the transport of liquefied gas in tankers or for propellants in rocket engines.
Factors controlling superelastic damping capacity of SMAs
Czech Academy of Sciences Publication Activity Database
Heller, Luděk; Šittner, Petr; Pilch, Jan; Landa, Michal
2009-01-01
Roč. 18, 5-6 (2009), 603-611 ISSN 1059-9495 Institutional research plan: CEZ:AV0Z10100520; CEZ:AV0Z20760514 Keywords : shape memory alloys * superelastic damping * thermomechanical testing Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.592, year: 2009
Chiral damping of magnetic domain walls
Jué, Emilie
2015-12-21
Structural symmetry breaking in magnetic materials is responsible for the existence of multiferroics1, current-induced spin–orbit torques2, 3, 4, 5, 6, 7 and some topological magnetic structures8, 9, 10, 11, 12. In this Letter we report that the structural inversion asymmetry (SIA) gives rise to a chiral damping mechanism, which is evidenced by measuring the field-driven domain-wall (DW) motion in perpendicularly magnetized asymmetric Pt/Co/Pt trilayers. The DW dynamics associated with the chiral damping and those with Dzyaloshinskii–Moriya interaction (DMI) exhibit identical spatial symmetry13, 14, 15, 16, 17, 18, 19. However, both scenarios are differentiated by their time reversal properties: whereas DMI is a conservative effect that can be modelled by an effective field, the chiral damping is purely dissipative and has no influence on the equilibrium magnetic texture. When the DW motion is modulated by an in-plane magnetic field, it reveals the structure of the internal fields experienced by the DWs, allowing one to distinguish the physical mechanism. The chiral damping enriches the spectrum of physical phenomena engendered by the SIA, and is essential for conceiving DW and skyrmion devices owing to its coexistence with DMI (ref. 20).
Structural dynamic modification using additive damping
Indian Academy of Sciences (India)
In order to control dynamic response in structures and machines, modofications using additive viscoelastic damping materials are highlighted. The techniques described for analysis include analytical methods for structural elements, FEM and perturbation methods for reanalysis or structural dynamic modifications for ...
Damped time advance methods for particles and EM fields
International Nuclear Information System (INIS)
Friedman, A.; Ambrosiano, J.J.; Boyd, J.K.; Brandon, S.T.; Nielsen, D.E. Jr.; Rambo, P.W.
1990-01-01
Recent developments in the application of damped time advance methods to plasma simulations include the synthesis of implicit and explicit ''adjustably damped'' second order accurate methods for particle motion and electromagnetic field propagation. This paper discusses this method
Transient events in bright debris discs: Collisional avalanches revisited
Thebault, P.; Kral, Q.
2018-01-01
Context. A collisional avalanche is set off by the breakup of a large planetesimal, releasing vast amounts of small unbound grains that enter a debris disc located further away from the star, triggering there a collisional chain reaction that could potentially create detectable transient structures. Aims: We investigate this mechanism, using for the first time a fully self-consistent code coupling dynamical and collisional evolutions. We also quantify for the first time the photometric evolution of the system and investigate whether or not avalanches could explain the short-term luminosity variations recently observed in some extremely bright debris discs. Methods: We use the state-of-the-art LIDT-DD code. We consider an avalanche-favoring A6V star, and two set-ups: a "cold disc" case, with a dust release at 10 au and an outer disc extending from 50 to 120 au, and a "warm disc" case with the release at 1 au and a 5-12 au outer disc. We explore, in addition, two key parameters: the density (parameterized by its optical depth τ) of the main outer disc and the amount of dust released by the initial breakup. Results: We find that avalanches could leave detectable structures on resolved images, for both "cold" and "warm" disc cases, in discs with τ of a few 10-3, provided that large dust masses (≳1020-5 × 1022 g) are initially released. The integrated photometric excess due to an avalanche is relatively limited, less than 10% for these released dust masses, peaking in the λ 10-20 μm domain and becoming insignificant beyond 40-50 μm. Contrary to earlier studies, we do not obtain stronger avalanches when increasing τ to higher values. Likewise, we do not observe a significant luminosity deficit, as compared to the pre-avalanche level, after the passage of the avalanche. These two results concur to make avalanches an unlikely explanation for the sharp luminosity drops observed in some extremely bright debris discs. The ideal configuration for observing an
Directory of Open Access Journals (Sweden)
Tai-Hong Cheng
2015-01-01
Full Text Available Composite materials are increasingly used in wind blade because of their superior mechanical properties such as high strength-to-weight and stiffness-to-weight ratio. This paper presents vibration and damping analysis of fiberreinforced composite wind turbine blade with viscoelastic damping treatment. The finite element method based on full layerwise displacement theory was employed to analyze the damping, natural frequency, and modal loss factor of composite shell structure. The lamination angle was considered in mathematical modeling. The curved geometry, transverse shear, and normal strains were exactly considered in present layerwise shell model, which can depict the zig-zag in-plane and out-of-plane displacements. The frequency response functions of curved composite shell structure and wind blade were calculated. The results show that the damping ratio of viscoelastic layer is found to be very sensitive to determination of magnitude of composite structures. The frequency response functions with variety of thickness of damping layer were investigated. Moreover, the natural frequency, modal loss factor, and mode shapes of composite fiber reinforced wind blade with viscoelastic damping control were calculated.
Preliminary Study on the Damping Effect of a Lateral Damping Buffer under a Debris Flow Load
Directory of Open Access Journals (Sweden)
Zheng Lu
2017-02-01
Full Text Available Simulating the impact of debris flows on structures and exploring the feasibility of applying energy dissipation devices or shock isolators to reduce the damage caused by debris flows can make great contribution to the design of disaster prevention structures. In this paper, we propose a new type of device, a lateral damping buffer, to reduce the vulnerability of building structures to debris flows. This lateral damping buffer has two mechanisms of damage mitigation: when debris flows impact on a building, it acts as a buffer, and when the structure vibrates due to the impact, it acts as a shock absorber, which can reduce the maximum acceleration response and subsequent vibration respectively. To study the effectiveness of such a lateral damping buffer, an impact test is conducted, which mainly involves a lateral damping buffer attached to a two-degree-of-freedom structure under a simulated debris flow load. To enable the numerical study, the equation of motion of the structure along with the lateral damping buffer is derived. A subsequent parametric study is performed to optimize the lateral damping buffer. Finally, a practical design procedure is also provided.
Active and passive damping based on piezoelectric elements -controllability issues-
Holterman, J.; de Vries, Theodorus J.A.; van Amerongen, J.; Jonker, Jan B.; Jonker, J.B.
2001-01-01
Piezoelectric elements are widely used for damping micro-vibrations in mechanical structures. Active damping can be realised robustly by means of collocated actuator-sensor-pairs, controlled so as to extract vibration energy. Excellent damping performance is possible as long as sufficient
Nonlinear heat and particle transport due to collisional drift waves
Energy Technology Data Exchange (ETDEWEB)
Nishi-Kawa, K.I.; Hatori, T.; Terashima, Y.
1978-07-01
A nonlinear analysis of collisional drift instability is developed in a slab model based on the two fluid equations, where inhomogeneities in electron and ion temperatures and unperturbed current are included in addition to ion inertia, finite ion gyroradius, and viscosity. A systematic expansion is introduced by taking epsilon=vertical-barkappavertical-barl as a smallness parameter, where kappa is the degree of density gradient and l is the linear scale of the slab along the density gradient. The nonlinear development of the drift wave near marginal stability is studied on the basis of the model equations. A new feature, hard excitation, has been found, which is due to the effects of the nonlinear frequency shift and the electron temperature gradient. The saturation amplitude is calculated, and the expressions for wave-associated particle and heat fluxes are obtained. A comparison of the expressions with the experimental results of a stellerator device is also made.
Resonant absorption of radar waves by a magnetized collisional plasma
International Nuclear Information System (INIS)
Sun Aiping; Tong Honghui; Shen Liru; Tang Deli; Qiu Xiaoming
2001-01-01
The propagation of radar waves in a magnetized collisional plasma slab is studied numerically. It is found for uniform plasma that: first, the wave attenuation and absorbed power show a peak value, i.e., resonant absorption when the collision frequency f en = 0.1, 0.5, 1 GHz and the wave frequency nears upper hybrid frequency. Secondly, the attenuation, absorbed, and transmitted power curves become flat at f en = 5, 10 Ghz. thirdly, the attenuation and absorbed power increase with plasma density, and the attenuation and the proportion of absorbed power can reach 100 dB and 80%, respectively, at the plasma density n = 10 11 cm -3 . For nonuniform plasma, the peak value of reflected power is larger than that in uniform plasma. So, uniform magnetized plasma is of more benefit to plasma cloaking
A collisional model for plasma immersion ion implantation
International Nuclear Information System (INIS)
Vahedi, V.; Lieberman, M.A.; Alves, M.V.; Verboncoeur, J.P.; Birdsall, C.K.
1990-01-01
In plasma immersion ion implantation, a target is immersed in a plasma and a series of negative short pulses are applied to it to implant the ions. A new analytical model is being developed for the high pressure regimes in which the motion of the ions is highly collisional. The model provides values for ion flux, average ion velocity at the target, and sheath edge motion as a function of time. These values are being compared with those obtained from simulation and show good agreement. A review is also given (for comparison) of the earlier work done at low pressures, where the motion of ions in the sheath is collisionless, also showing good agreement between analysis and simulation. The simulation code is PDP1 which utilizes particle-in-cell techniques plus Monte-Carlo simulation of electron-neutral (elastic, excitation and ionization) and ion-neutral (scattering and charge-exchange) collisions
Dynamics of collisional particles in a fluctuating magnetic field
International Nuclear Information System (INIS)
Spineanu, F.; Vlad, M.
1995-01-01
The equations of motion of a test particle in a stochastic magnetic field and interacting through collisions with a plasma are Langevin-type equations. Under reasonable assumptions on the statistical properties of the random processes (field and collisional velocity fluctuations), we perform an analytical calculation of the mean-square displacement (MSD) of the particle. The basic nonlinearity in the problem (Lagrangian argument of the random field) yields complicated averages, which we carry out using a functional formalism. The result is expressed as a series, and we find the conditions for its convergence, i.e. the limits of validity of our approach (essentially, we must restrict attention to non-chaotic regimes). Further, employing realistic bounds (spectral cut-off and limited time of observation), we derive an explicit formula for the MSD. We show that from this unique expression, we can obtain several previously known results. (author)
LAD Dissertation Prize Talk: Molecular Collisional Excitation in Astrophysical Environments
Walker, Kyle M.
2017-06-01
While molecular excitation calculations are vital in determining particle velocity distributions, internal state distributions, abundances, and ionization balance in gaseous environments, both theoretical calculations and experimental data for these processes are lacking. Reliable molecular collisional data with the most abundant species - H2, H, He, and electrons - are needed to probe material in astrophysical environments such as nebulae, molecular clouds, comets, and planetary atmospheres. However, excitation calculations with the main collider, H2, are computationally expensive and therefore various approximations are used to obtain unknown rate coefficients. The widely-accepted collider-mass scaling approach is flawed, and alternate scaling techniques based on physical and mathematical principles are presented here. The most up-to-date excitation data are used to model the chemical evolution of primordial species in the Recombination Era and produce accurate non-thermal spectra of the molecules H2+, HD, and H2 in a primordial cloud as it collapses into a first generation star.
A collisional-radiative average atom model for hot plasmas
International Nuclear Information System (INIS)
Rozsnyai, B.F.
1996-01-01
A collisional-radiative 'average atom' (AA) model is presented for the calculation of opacities of hot plasmas not in the condition of local thermodynamic equilibrium (LTE). The electron impact and radiative rate constants are calculated using the dipole oscillator strengths of the average atom. A key element of the model is the photon escape probability which at present is calculated for a semi infinite slab. The Fermi statistics renders the rate equation for the AA level occupancies nonlinear, which requires iterations until the steady state. AA level occupancies are found. Detailed electronic configurations are built into the model after the self-consistent non-LTE AA state is found. The model shows a continuous transition from the non-LTE to the LTE state depending on the optical thickness of the plasma. 22 refs., 13 figs., 1 tab
On collisional disruption - Experimental results and scaling laws
Davis, D. R.; Ryan, E. V.
1990-01-01
Both homogeneous and inhomogeneous targets have been addressed by the present experimental consideration of the impact strengths, fragment sizes, and fragment velocities generated by cement mortar targets whose crushing strengths vary by an order of magnitude, upon impact of projectiles in the velocity range of 50-5700 m/sec. When combined with additional published data, dynamic impact strength is found to correlate with quasi-static material strengths for materials ranging in character from basalt to ice; two materials not following this trend, however, are weak mortar and clay targets. Values consistent with experimental results are obtainable with a simple scaling algorithm based on impact energy, material properties, and collisional strain rate.
A damping boundary condition for atomistic-continuum coupling
International Nuclear Information System (INIS)
Zhang Jie; Tieu, Kiet; Michal, Guillaume; Zhu Hongtao; Zhang Liang; Su Lihong; Deng Guanyu; Wang Hui
2017-01-01
The minimization of spurious wave reflection is a challenge in multiscale coupling due to the difference of spatial resolution between atomistic and continuum regions. In this study, a new damping condition is presented for eliminating spurious wave reflection at the interface between atomistic and continuum regions. This damping method starts by a coarse–fine decomposition of the atomic velocity based on the bridging scale method. The fine scale velocity of the atoms in the damping region is reduced by applying nonlinear damping coefficients. The effectiveness of this damping method is verified by one- and two- dimensional simulations. (paper)
Barotropic FRW cosmologies with Chiellini damping
International Nuclear Information System (INIS)
Rosu, Haret C.; Mancas, Stefan C.; Chen, Pisin
2015-01-01
It is known that barotropic FRW equations written in the conformal time variable can be reduced to simple linear equations for an exponential function involving the conformal Hubble rate. Here, we show that an interesting class of barotropic universes can be obtained in the linear limit of a special type of nonlinear dissipative Ermakov–Pinney equations with the nonlinear dissipation built from Chiellini's integrability condition. These cosmologies, which evolutionary are similar to the standard ones, correspond to barotropic fluids with adiabatic indices rescaled by a particular factor and have amplitudes of the scale factors inverse proportional to the adiabatic index. - Highlights: • Chiellini-damped Ermakov–Pinney equations are used in barotropic FRW cosmological context. • Chiellini-damped scale factors of the barotropic FRW universes are introduced. • These scale factors are similar to the undamped ones
Damping Estimation by Frequency Domain Decomposition
DEFF Research Database (Denmark)
Brincker, Rune; Ventura, C. E.; Andersen, P.
2001-01-01
In this paper it is explained how the damping can be estimated using the Frequency Domain Decomposition technique for output-only modal identification, i.e. in the case where the modal parameters is to be estimated without knowing the forces exciting the system. Also it is explained how the natural...... back to time domain to identify damping and frequency. The technique is illustrated on a simple simulation case with 2 closely spaced modes. On this example it is illustrated how the identification is influenced by very closely spacing, by non-orthogonal modes, and by correlated input. The technique...... frequencies can be accurately estimated without being limited by the frequency resolution of the discrete Fourier transform. It is explained how the spectral density matrix is decomposed into a set of single degree of freedom systems, and how the individual SDOF auto spectral density functions are transformed...
DAMPING OF SUBSYNCHRONOUS MODES OF OSCILLATIONS
Directory of Open Access Journals (Sweden)
JAGADEESH PASUPULETI
2006-06-01
Full Text Available The IEEE bench mark model 2 series compensated system is considered for analysis. It consists of single machine supplying power to infinite bus through two parallel lines one of which is series compensated. The mechanical system considered consists of six mass, viz, high pressure turbine, intermediate pressure turbine, two low pressure turbines, generator and an exciter. The excitation system considered is IEEE type 1 with saturation. The auxiliary controls considered to damp the unstable subsynchronous modes of oscillations are Power System Stabilizer (PSS and Static var Compensator (SVC. The different cases of power system stabilizer and reactive power controls are adapted to study the effectiveness of damping these unstable subsynchronous modes of oscillations.
Enthalpy damping for the steady Euler equations
Jespersen, D. C.
1985-01-01
For inviscid steady flow problems where the enthalpy is constant at steady state, it was previously proposed to use the difference between the local enthalpy and the steady state enthalpy as a driving term to accelerate convergence of iterative schemes. This idea is analyzed, both on the level of the partial differential equation and on the level of a particular finite difference scheme. It is shown that for the two-dimensional unsteady Euler equations, a hyperbolic system with eigenvalues on the imaginary axis, there is no enthalpy damping strategy which moves all the eigenvalues into the open left half plane. For the numerical scheme, however, the analysis shows and examples verify that enthalpy damping is potentially effective in accelerating convergence to steady state.
Barotropic FRW cosmologies with Chiellini damping
Energy Technology Data Exchange (ETDEWEB)
Rosu, Haret C., E-mail: hcr@ipicyt.edu.mx [IPICyT, Instituto Potosino de Investigacion Cientifica y Tecnologica, Camino a la presa San José 2055, Col. Lomas 4a Sección, 78216 San Luis Potosí, SLP (Mexico); Mancas, Stefan C., E-mail: stefan.mancas@erau.edu [Department of Mathematics, Embry–Riddle Aeronautical University, Daytona Beach, FL 32114-3900 (United States); Chen, Pisin, E-mail: pisinchen@phys.ntu.edu.tw [Leung Center for Cosmology and Particle Astrophysics (LeCosPA) and Department of Physics, National Taiwan University, Taipei 10617, Taiwan (China)
2015-05-08
It is known that barotropic FRW equations written in the conformal time variable can be reduced to simple linear equations for an exponential function involving the conformal Hubble rate. Here, we show that an interesting class of barotropic universes can be obtained in the linear limit of a special type of nonlinear dissipative Ermakov–Pinney equations with the nonlinear dissipation built from Chiellini's integrability condition. These cosmologies, which evolutionary are similar to the standard ones, correspond to barotropic fluids with adiabatic indices rescaled by a particular factor and have amplitudes of the scale factors inverse proportional to the adiabatic index. - Highlights: • Chiellini-damped Ermakov–Pinney equations are used in barotropic FRW cosmological context. • Chiellini-damped scale factors of the barotropic FRW universes are introduced. • These scale factors are similar to the undamped ones.
Interfacial friction damping properties in magnetorheological elastomers
International Nuclear Information System (INIS)
Fan, Yanceng; Gong, Xinglong; Xuan, Shouhu; Zhang, Wei; Zheng, Jian; Jiang, Wanquan
2011-01-01
In this study, the interfacial friction damping properties of magnetorheological elastomers (MREs) were investigated experimentally. Two kinds of carbonyl iron particles, with sizes of 1.1 µm and 9.0 µm, were used to fabricate four MRE samples, whose particle weight fractions were 10%, 30%, 60% and 80%, respectively. Their microstructures were observed using an environmental scanning electron microscope (SEM). The dynamic performances of these samples, including shear storage modulus and loss factor were measured with a modified dynamic mechanical analyzer (DMA). The experimental results indicate that MRE samples fabricated with 1.1 µm carbonyl iron particles have obvious particle agglomeration, which results in the fluctuation of loss factor compared with other MRE samples fabricated with large particle sizes. The analysis implies that the interfacial friction damping mainly comes from the frictional sliding at the interfaces between the free rubber and the particles
Relativity damps OPEP in nuclear matter
International Nuclear Information System (INIS)
Banerjee, M.K.
1998-06-01
Using a relativistic Dirac-Brueckner analysis the OPEP contribution to the ground state energy of nuclear matter is studied. In the study the pion is derivative-coupled. The author finds that the role of the tensor force in the saturation mechanism is substantially reduced compared to its dominant role in a usual nonrelativistic treatment. He shows that the damping of derivative-coupled OPEP is actually due to the decrease of M * /M with increasing density. He points out that if derivative-coupled OPEP is the preferred form of nuclear effective lagrangian nonrelativistic treatment of nuclear matter is in trouble. Lacking the notion of M * it cannot replicate the damping. He suggests an examination of the feasibility of using pseudoscalar coupled πN interaction before reaching a final conclusion about nonrelativistic treatment of nuclear matter
Rapidly moving contact lines and damping contributions
Xia, Yi; Daniel, Susan; Steen, Paul
2017-11-01
Contact angle varies dynamically with contact line (CL) speed when a liquid moves across a solid support, as when a liquid spreads rapidly. For sufficiently rapid spreading, inertia competes with capillarity to influence the interface shape near the support. We use resonant-mode plane-normal support oscillations of droplets to drive lateral contact-line motion. Reynolds numbers based on CL speeds are high and capillary numbers are low. These are inertial-capillary motions. By scanning the driving frequency, we locate the frequency at peak amplification (resonance), obtain the scaled peak height (amplification factor) and a measure of band-width (damping ratio). We report how a parameter for CL mobility depends on these scanning metrics, with the goal of distinguishing contributions from the bulk- and CL-dissipation to overall damping.
Single bunch beam breakup in linacs and BNS damping
International Nuclear Information System (INIS)
Toyomasu, Takanori
1991-12-01
We study a single-bunch beam breakup (BBU) problem by a macro-particle model. We consider both the BBU solution and the Landau damping solution which includes the Balakin-Novokhatsky-Smirnov (BNS) damping. In the BBU solution, we get an analytic solution which includes both the Chao-Richter-Yao solution and the two-particle model solution and which agrees well with simulation. The solution can also be used in a multi-bunch case. In the Landau damping solution, we can be see the mechanism of Landau damping formally and can get some insights into BNS damping. We confirm that a two-particle model criterion for BNS damping is a good one. We expect that the two-particle model criterion is represented by the first order interaction in Landau damping solution of a macro-particle model. (author)
Comparing Sources of Damping of Cross-Wind Motion
DEFF Research Database (Denmark)
Tarp-Johansen, Niels Jacob; Andersen, Lars; Christensen, Erik Damgaard
2009-01-01
practise plays a key role in this. The questions are: does more damping exist and is one of the sources of damping the main contributor allowing for site-independent guidelines. The aim of this paper is to address these issues. It is demonstrated that tower dampers are important in order to tackle...... importance of the sources of damping clearly depends on the damping forces caused, but equally important is the displacements at the point of attack of the forces which is decisive for the amount of mechanical work performed, i.e. damping acting at the tower base has less potential than damping acting...... driving if there is a significant wind-wave misalignment. In order to avoid unnecessary conservatism it is therefore important to know if there is more damping available than assumed in the today's practise. The paper treats this issue. Contents Based on engineering judgement it is expected...
A review of damping of two-phase flows
International Nuclear Information System (INIS)
Hara, Fumio
1993-01-01
Damping of two-phase flows has been recognized as one of the most unknown parameters in analyzing vibrational characteristics of structures subjected to two-phase flows since it seems to be influenced by many physical parameters involved in the physics of dynamic energy dissipation of a vibrating structure, for example, liquid viscosity, surface tension, flow velocity, mass ratio, frequency, void fraction, flow regime and so forth. This paper deals with a review of scientific works done to date on the damping of two phase flows and discussions about what has been clarified and what has not been known to us, or what kinds of research are needed about two-phase flow damping. The emphasis is put on the definition of two-phase fluid damping, damping measurement techniques, damping characteristics in relation to two phase flow configurations, and damping generation mechanisms
Gyroscopic stabilization and indefimite damped systems
DEFF Research Database (Denmark)
Pommer, Christian
a class of feasibel skew-Hermitian matrices A depending on the choise of M. The theory can be applied to dynamical systems of the form x''(t) + ( dD + g G) x'(t) + K x(t) = 0 where G is a skew symmetric gyrocopic matrix, D is a symmetric indefinite damping matrix and K > 0 is a positive definite stiffness...
Proceedings of Damping Volume 1 of 3
1993-06-01
provided by the payload contractor. Prior to considerations of various interface stiffness and damping values, the NASTRAN DMAP set-up for the proposed...coworkers in the Dynamic Loads Group. He particularly appreciates Mr. L. J. Van Hofwegen for the set-up of NASTRAN DMAP . This work could not have...from NASTRAN finite element program. If the input torquer disturbance source were activated at maximum output, finite element analysis showed that the
Collective Effects in the CLIC Damping Rings
Zimmermann, Frank; Korostelev, Maxim S; Schulte, Daniel; Yokoya, Kaoru
2005-01-01
The small emittance, short bunch length, and high current in the CLIC damping ring could give rise to collective effects which degrade the quality of the extracted beam. In this paper, we survey a number of possible instabilities and estimate their impact on the ring performance. The effects considered include fast beam-ion instability, coherent synchrotron radiation, Touschek scattering, intrabeam scattering, resistive-wall wake fields, and electron cloud.
Parameter Scan for the CLIC Damping Rings
Papaphilippou, Y; Korostelev, M
2008-01-01
Triggered by the RF frequency reduction of the CLIC main linac cavities, the damping ring parameters had to be reevaluated and the rings performance adapted to the new luminosity requirements. In view of a staged approach for reaching the ultimate energy of the collider, the dependence of the rings output emittances under the influence of Intrabeam Scattering is evaluated with respect to different beam characteristics such as bunch population, beam energy, coupling and longitudinal beam characteristics.
Landau damping in trapped Bose condensed gases
Energy Technology Data Exchange (ETDEWEB)
Jackson, B; Zaremba, E [Department of Physics, Queen' s University, Kingston, ON K7L 3N6 (Canada)
2003-07-01
We study Landau damping in dilute Bose-Einstein condensed gases in both spherical and prolate ellipsoidal harmonic traps. We solve the Bogoliubov equations for the mode spectrum in both of these cases, and calculate the damping by summing over transitions between excited quasiparticle states. The results for the spherical case are compared to those obtained in the Hartree-Fock (HF) approximation, where the excitations take on a single-particle character, and excellent agreement between the two approaches is found. We have also taken the semiclassical limit of the HF approximation and obtain a novel expression for the Landau damping rate involving the time-dependent self-diffusion function of the thermal cloud. As a final approach, we study the decay of a condensate mode by making use of dynamical simulations in which both the condensate and thermal cloud are evolved explicitly as a function of time. A detailed comparison of all these methods over a wide range of sample sizes and trap geometries is presented.
First Results from the DAMPE Mission
CERN. Geneva
2018-01-01
DAMPE (DArk Matter Particle Explorer) is a satellite mission of the Chinese Academy of Sciences (CAS) dedicated to high energy cosmic ray detections. Since its successful launch on December 17th, 2015 a large amount of cosmic ray data has been collected. With relatively large acceptance, DAMPE is designed to detect electrons (and positrons) up to 10 TeV with unprecedented energy resolution to search for new features in the cosmic ray electron plus positron (CRE) spectrum. It will also study cosmic ray nuclei up to 100 TeV with good precision, which will bring new input to the study of their still unknown origin and their propagation through the Galaxy. In this talk, the DAMPE mission will be introduced, together with some details of the construction and on-ground calibration of the detector subsystems. The in-orbit detector commissioning, calibration and operation will be described. First data analysis results, including the recently published CRE spectrum from 25 GeV to 4.6 TeV based on the data collected i...
Radiative damping in plasma-based accelerators
Directory of Open Access Journals (Sweden)
I. Yu. Kostyukov
2012-11-01
Full Text Available The electrons accelerated in a plasma-based accelerator undergo betatron oscillations and emit synchrotron radiation. The energy loss to synchrotron radiation may seriously affect electron acceleration. The electron dynamics under combined influence of the constant accelerating force and the classical radiation reaction force is studied. It is shown that electron acceleration cannot be limited by radiation reaction. If initially the accelerating force was stronger than the radiation reaction force, then the electron acceleration is unlimited. Otherwise the electron is decelerated by radiative damping up to a certain instant of time and then accelerated without limits. It is shown that regardless of the initial conditions the infinite-time asymptotic behavior of an electron is governed by a self-similar solution providing that the radiative damping becomes exactly equal to 2/3 of the accelerating force. The relative energy spread induced by the radiative damping decreases with time in the infinite-time limit. The multistage schemes operating in the asymptotic acceleration regime when electron dynamics is determined by the radiation reaction are discussed.
Emission of strong Terahertz pulses from laser wakefields in weakly coupled plasma
Energy Technology Data Exchange (ETDEWEB)
Singh, Divya, E-mail: dsingh@rajdhani.du.ac.in [PWAPA Laboratory, Department of Physics, Indian Institute of Technology Delhi, New Delhi 110 016 (India); Department of Physics & Electronics, Rajdhani College, University of Delhi, Raja Garden, Ring Road, New Delhi 110015 (India); Malik, Hitendra K. [PWAPA Laboratory, Department of Physics, Indian Institute of Technology Delhi, New Delhi 110 016 (India)
2016-09-01
The present paper discusses the laser plasma interaction for the wakefield excitation and the role of external magnetic field for the emission of Terahertz radiation in a collisional plasma. Flat top lasers are shown to be more appropriate than the conventional Gaussian lasers for the effective excitation of wakefields and hence, the generation of strong Terahertz radiation through the transverse component of wakefield.
DEFF Research Database (Denmark)
Hagerhed, L.; Bornehag, Carl-Gustaf; Sundell, Jan
2002-01-01
of foundation. Visible mold or damp stains were reported in 1.3 and 1.6% of single-family and multi-family houses respectively, dampness connected to the floor in 6.5 and 13.9% and condensation on windows in 12.5 and 16.9%. "Stuffy air" was reported in 22.3 and 42.8%, "Moldy odor" in 3.9 and 5.8% and perception...... of "Dry air" in 17.3 and 33.7% respectively. Older buildings and the use of natural ventilation were associated with increased frequency of dampness indicators as well as to increased frequencies of complaints on bad indoor air quality....
Collisional-radiative model including recombination processes for W27+ ion★
Murakami, Izumi; Sasaki, Akira; Kato, Daiji; Koike, Fumihiro
2017-10-01
We have constructed a collisional-radiative (CR) model for W27+ ions including 226 configurations with n ≤ 9 and ł ≤ 5 for spectroscopic diagnostics. We newly include recombination processes in the model and this is the first result of extreme ultraviolet spectrum calculated for recombining plasma component. Calculated spectra in 40-70 Å range in ionizing and recombining plasma components show similar 3 strong lines and 1 line weak in recombining plasma component at 45-50 Å and many weak lines at 50-65 Å for both components. Recombination processes do not contribute much to the spectrum at around 60 Å for W27+ ion. Dielectronic satellite lines are also minor contribution to the spectrum of recombining plasma component. Dielectronic recombination (DR) rate coefficient from W28+ to W27+ ions is also calculated with the same atomic data in the CR model. We found that larger set of energy levels including many autoionizing states gave larger DR rate coefficients but our rate agree within factor 6 with other works at electron temperature around 1 keV in which W27+ and W28+ ions are usually observed in plasmas. Contribution to the Topical Issue "Atomic and Molecular Data and their Applications", edited by Gordon W.F. Drake, Jung-Sik Yoon, Daiji Kato, and Grzegorz Karwasz.
Light Assisted Collisional Losses in a ^85/87Rb Optical Trap
Gorges, Anthony; Deangelo, Michael; Bingham, Nicholas; Hamilton, Mathew; Roberts, Jacob
2008-05-01
Light-assisted collisional loss, loss due to the excitation of an atom-atom pair to a stronger interatomic potential, poses an interesting problem with respect to loading two isotopes into the same optical trap. By loading both ^85Rb and ^87Rb into a far off resonant trap (FORT), we have studied inter- and intraspecies excited state/ground state collisional losses. Because of the relatively weak confinement of the FORT we expect the hyperfine structure of the different isotopes to play a crucial role in the collisional loss rates. This allows us to directly compare losses associated with long range excited state potentials; from purely attractive to purely repulsive, long range to short range. We observe radically different loss rates for different excited state potentials. Additionally, we observe that some collisional channels' loss rates are heavily saturated at our operating intensities (˜15 mW/cm^2). These losses are important limitations in loading dual isotope optical traps.
Damping Analysis of Cylindrical Composite Structures with Enhanced Viscoelastic Properties
Kliem, Mathias; Høgsberg, Jan; Vanwalleghem, Joachim; Filippatos, Angelos; Hoschützky, Stefan; Fotsing, Edith-Roland; Berggreen, Christian
2018-04-01
Constrained layer damping treatments are widely used in mechanical structures to damp acoustic noise and mechanical vibrations. A viscoelastic layer is thereby applied to a structure and covered by a stiff constraining layer. When the structure vibrates in a bending mode, the viscoelastic layer is forced to deform in shear mode. Thus, the vibration energy is dissipated as low grade frictional heat. This paper documents the efficiency of passive constrained layer damping treatments for low frequency vibrations of cylindrical composite specimens made of glass fibre-reinforced plastics. Different cross section geometries with shear webs have been investigated in order to study a beneficial effect on the damping characteristics of the cylinder. The viscoelastic damping layers are placed at different locations within the composite cylinder e.g. circumferential and along the neutral plane to evaluate the location-dependent efficiency of constrained layer damping treatments. The results of the study provide a thorough understanding of constrained layer damping treatments and an improved damping design of the cylindrical composite structure. The highest damping is achieved when placing the damping layer in the neutral plane perpendicular to the bending load. The results are based on free decay tests of the composite structure.
Magnetic damping phenomena in ferromagnetic thin-films and multilayers
Azzawi, S.; Hindmarch, A. T.; Atkinson, D.
2017-11-01
Damped ferromagnetic precession is an important mechanism underpinning the magnetisation processes in ferromagnetic materials. In thin-film ferromagnets and ferromagnetic/non-magnetic multilayers, the role of precession and damping can be critical for spintronic device functionality and as a consequence there has been significant research activity. This paper presents a review of damping in ferromagnetic thin-films and multilayers and collates the results of many experimental studies to present a coherent synthesis of the field. The terms that are used to define damping are discussed with the aim of providing consistent definitions for damping phenomena. A description of the theoretical basis of damping is presented from early developments to the latest discussions of damping in ferromagnetic thin-films and multilayers. An overview of the time and frequency domain methods used to study precessional magnetisation behaviour and damping in thin-films and multilayers is also presented. Finally, a review of the experimental observations of magnetic damping in ferromagnetic thin-films and multilayers is presented with the most recent explanations. This brings together the results from many studies and includes the effects of ferromagnetic film thickness, the effects of composition on damping in thin-film ferromagnetic alloys, the influence of non-magnetic dopants in ferromagnetic films and the effects of combining thin-film ferromagnets with various non-magnetic layers in multilayered configurations.
Non-Linear Slosh Damping Model Development and Validation
Yang, H. Q.; West, Jeff
2015-01-01
Propellant tank slosh dynamics are typically represented by a mechanical model of spring mass damper. This mechanical model is then included in the equation of motion of the entire vehicle for Guidance, Navigation and Control (GN&C) analysis. For a partially-filled smooth wall propellant tank, the critical damping based on classical empirical correlation is as low as 0.05%. Due to this low value of damping, propellant slosh is potential sources of disturbance critical to the stability of launch and space vehicles. It is postulated that the commonly quoted slosh damping is valid only under the linear regime where the slosh amplitude is small. With the increase of slosh amplitude, the critical damping value should also increase. If this nonlinearity can be verified and validated, the slosh stability margin can be significantly improved, and the level of conservatism maintained in the GN&C analysis can be lessened. The purpose of this study is to explore and to quantify the dependence of slosh damping with slosh amplitude. Accurately predicting the extremely low damping value of a smooth wall tank is very challenging for any Computational Fluid Dynamics (CFD) tool. One must resolve thin boundary layers near the wall and limit numerical damping to minimum. This computational study demonstrates that with proper grid resolution, CFD can indeed accurately predict the low damping physics from smooth walls under the linear regime. Comparisons of extracted damping values with experimental data for different tank sizes show very good agreements. Numerical simulations confirm that slosh damping is indeed a function of slosh amplitude. When slosh amplitude is low, the damping ratio is essentially constant, which is consistent with the empirical correlation. Once the amplitude reaches a critical value, the damping ratio becomes a linearly increasing function of the slosh amplitude. A follow-on experiment validated the developed nonlinear damping relationship. This discovery can
Expansion of Collisional Radiative Model for Helium line ratio spectroscopy
Cinquegrani, David; Cooper, Chris; Forest, Cary; Milhone, Jason; Munoz-Borges, Jorge; Schmitz, Oliver; Unterberg, Ezekial
2015-11-01
Helium line ratio spectroscopy is a powerful technique of active plasma edge spectroscopy. It enables reconstruction of plasma edge parameters like electron density and temperature by use of suitable Collisional Radiative Models (CRM). An established approach is successful at moderate plasma densities (~1018m-3 range) and temperature (30-300eV), taking recombination and charge exchange to be negligible. The goal of this work is to experimentally explore limitations of this approach to CRM. For basic validation the Madison Plasma Dynamo eXperiment (MPDX) will be used. MPDX offers a very uniform plasma and spherical symmetry at low temperature (5-20 eV) and low density (1016 -1017m-3) . Initial data from MPDX shows a deviation in CRM results when compared to Langmuir probe data. This discrepancy points to the importance of recombination effects. The validated model is applied to first time measurement of electron density and temperature in front of an ICRH antenna at the TEXTOR tokamak. These measurements are important to understand RF coupling and PMI physics at the antenna limiters. Work supported in part by start up funds of the Department of Engineering Physics at the UW - Madison, USA and NSF CAREER award PHY-1455210.
Potential around a dust grain in collisional plasma
International Nuclear Information System (INIS)
Moulick, R.; Goswami, K. S.
2015-01-01
The ion neutral collision can lead to interesting phenomena in dust charging, totally different from the expectations based on the traditional orbit motion limited theory. The potential around a dust grain is investigated for the collisional plasma considering the presence of ion neutral collisions. Fluid equations are solved for the one dimensional radial coordinate. It is observed that with the gradual increase in ion neutral collision, the potential structure around the dust grain changes its shape and is different from the usual Debye-Hückel potential. The shift however starts from a certain value of ion neutral collision and the electron-ion density varies accordingly. The potential variation is interesting and reconfirms the fact that there exists a region of attraction for negative charges. The collision modeling is done for the full range of plasma, i.e., considering the bulk and the sheath jointly. The potential variation with collision is also shown explicitly and the variation is found to cope up with the earlier observations
Constraining scalar fields with stellar kinematics and collisional dark matter
International Nuclear Information System (INIS)
Amaro-Seoane, Pau; Barranco, Juan; Bernal, Argelia; Rezzolla, Luciano
2010-01-01
The existence and detection of scalar fields could provide solutions to long-standing puzzles about the nature of dark matter, the dark compact objects at the centre of most galaxies, and other phenomena. Yet, self-interacting scalar fields are very poorly constrained by astronomical observations, leading to great uncertainties in estimates of the mass m φ and the self-interacting coupling constant λ of these fields. To counter this, we have systematically employed available astronomical observations to develop new constraints, considerably restricting this parameter space. In particular, by exploiting precise observations of stellar dynamics at the centre of our Galaxy and assuming that these dynamics can be explained by a single boson star, we determine an upper limit for the boson star compactness and impose significant limits on the values of the properties of possible scalar fields. Requiring the scalar field particle to follow a collisional dark matter model further narrows these constraints. Most importantly, we find that if a scalar dark matter particle does exist, then it cannot account for both the dark-matter halos and the existence of dark compact objects in galactic nuclei
HIDING IN THE SHADOWS. II. COLLISIONAL DUST AS EXOPLANET MARKERS
Energy Technology Data Exchange (ETDEWEB)
Dobinson, Jack; Leinhardt, Zoë M.; Lines, Stefan; Carter, Philip J. [University of Bristol, School of Physics, H. H. Wills Physics Laboratory, University of Bristol, Bristol BS8 1TL (United Kingdom); Dodson-Robinson, Sarah E. [University of Delaware, Department of Physics and Astronomy, 217 Sharp Lab, Newark, DE 19716 (United States); Teanby, Nick A. [University of Bristol, School of Earth Sciences, H. H. Wills Physics Laboratory, University of Bristol, Bristol BS8 1TL (United Kingdom)
2016-03-20
Observations of the youngest planets (∼1–10 Myr for a transitional disk) will increase the accuracy of our planet formation models. Unfortunately, observations of such planets are challenging and time-consuming to undertake, even in ideal circumstances. Therefore, we propose the determination of a set of markers that can preselect promising exoplanet-hosting candidate disks. To this end, N-body simulations were conducted to investigate the effect of an embedded Jupiter-mass planet on the dynamics of the surrounding planetesimal disk and the resulting creation of second-generation collisional dust. We use a new collision model that allows fragmentation and erosion of planetesimals, and dust-sized fragments are simulated in a post-process step including non-gravitational forces due to stellar radiation and a gaseous protoplanetary disk. Synthetic images from our numerical simulations show a bright double ring at 850 μm for a low-eccentricity planet, whereas a high-eccentricity planet would produce a characteristic inner ring with asymmetries in the disk. In the presence of first-generation primordial dust these markers would be difficult to detect far from the orbit of the embedded planet, but would be detectable inside a gap of planetary origin in a transitional disk.
Updated Collisional Ionization Equilibrium Calculated for Optically Thin Plasmas
Savin, Daniel Wolf; Bryans, P.; Badnell, N. R.; Gorczyca, T. W.; Laming, J. M.; Mitthumsiri, W.
2010-03-01
Reliably interpreting spectra from electron-ionized cosmic plasmas requires accurate ionization balance calculations for the plasma in question. However, much of the atomic data needed for these calculations have not been generated using modern theoretical methods and their reliability are often highly suspect. We have carried out state-of-the-art calculations of dielectronic recombination (DR) rate coefficients for the hydrogenic through Na-like ions of all elements from He to Zn as well as for Al-like to Ar-like ions of Fe. We have also carried out state-of-the-art radiative recombination (RR) rate coefficient calculations for the bare through Na-like ions of all elements from H to Zn. Using our data and the recommended electron impact ionization data of Dere (2007), we present improved collisional ionization equilibrium calculations (Bryans et al. 2006, 2009). We compare our calculated fractional ionic abundances using these data with those presented by Mazzotta et al. (1998) for all elements from H to Ni. This work is supported in part by the NASA APRA and SHP SR&T programs.
On the inclusion of collisional correlations in quantum dynamics
Energy Technology Data Exchange (ETDEWEB)
Slama, N. [Laboratoire de Physique Théorique, Université Paul Sabatier, CNRS, F-31062 Toulouse Cédex (France); Reinhard, P.-G. [Institut für Theoretische Physik, Universität Erlangen, D-91058 Erlangen (Germany); Suraud, E., E-mail: suraud@irsamc.ups-tlse.fr [Laboratoire de Physique Théorique, Université Paul Sabatier, CNRS, F-31062 Toulouse Cédex (France); Physics Department, University at Buffalo, The State University New York, Buffalo, NY 14260 (United States)
2015-04-15
We present a formalism to describe collisional correlations responsible for thermalization effects in finite quantum systems. The approach consists in a stochastic extension of time dependent mean field theory. Correlations are treated in time dependent perturbation theory and loss of coherence is assumed at some time intervals allowing a stochastic reduction of the correlated dynamics in terms of a stochastic ensemble of time dependent mean-fields. This theory was formulated long ago in terms of density matrices but never applied in practical cases because of its complexity. We propose here a reformulation of the theory in terms of wave functions and use a simplified 1D model of cluster and molecules allowing to test the theory in a schematic but realistic manner. We illustrate the performance in terms of several observables, in particular global moments of the density matrix and single particle entropy built on occupation numbers. The occupation numbers remain fixed in time dependent mean-field propagation and change when evaluating the correlations, then taking fractional values. They converge asymptotically towards Fermi distributions which is a clear indication of thermalization.
COLLISIONAL GROOMING MODELS OF THE KUIPER BELT DUST CLOUD
International Nuclear Information System (INIS)
Kuchner, Marc J.; Stark, Christopher C.
2010-01-01
We modeled the three-dimensional structure of the Kuiper Belt (KB) dust cloud at four different dust production rates, incorporating both planet-dust interactions and grain-grain collisions using the collisional grooming algorithm. Simulated images of a model with a face-on optical depth of ∼10 -4 primarily show an azimuthally symmetric ring at 40-47 AU in submillimeter and infrared wavelengths; this ring is associated with the cold classical KB. For models with lower optical depths (10 -6 and 10 -7 ), synthetic infrared images show that the ring widens and a gap opens in the ring at the location of Neptune; this feature is caused by trapping of dust grains in Neptune's mean motion resonances. At low optical depths, a secondary ring also appears associated with the hole cleared in the center of the disk by Saturn. Our simulations, which incorporate 25 different grain sizes, illustrate that grain-grain collisions are important in sculpting today's KB dust, and probably other aspects of the solar system dust complex; collisions erase all signs of azimuthal asymmetry from the submillimeter image of the disk at every dust level we considered. The model images switch from being dominated by resonantly trapped small grains ('transport dominated') to being dominated by the birth ring ('collision dominated') when the optical depth reaches a critical value of τ ∼ v/c, where v is the local Keplerian speed.
Collisional Grooming Models of the Kuiper Belt Dust Cloud
Kuchner, Marc J.; Stark, Christopher C.
2010-01-01
We modeled the three-dimensional structure of the Kuiper Belt (KB) dust cloud at four different dust production rates, incorporating both planet-dust interactions and grain-grain collisions using the collisional grooming algorithm. Simulated images of a model with a face-on optical depth of approximately 10 (exp -4) primarily show an azimuthally- symmetric ring at 40-47 AU in submillimeter and infrared wavelengths; this ring is associated with the cold classical KB. For models with lower optical depths (10 (exp -6) and 10 (exp-7)), synthetic infrared images show that the ring widens and a gap opens in the ring at the location of Neptune; this feature is caused by trapping of dust grains in Neptune's mean motion resonances. At low optical depths, a secondary ring also appears associated with the hole cleared in the center of the disk by Saturn. Our simulations, which incorporate 25 different grain sizes, illustrate that grain-grain collisions are important in sculpting today's KB dust, and probably other aspects of the solar system dust complex; collisions erase all signs of azimuthal asymmetry from the submillimeter image of the disk at every dust level we considered. The model images switch from being dominated by resonantly trapped small grains ("transport dominated") to being dominated by the birth ring ("collision dominated") when the optical depth reaches a critical value of r approximately v/c, where v is the local Keplerian speed.
Cancellation of Collisional Frequency Shifts in Optical Lattice Clocks with Rabi Spectroscopy
Lee, Sangkyung; Park, Chang Yong; Lee, Won-Kyu; Yu, Dai-Hyuk
2015-01-01
We analyze both the s- and p-wave collision induced frequency shifts and propose a over-$\\pi$ pulse scheme to cancel the shifts in optical lattice clocks interrogated by a Rabi pulse. The collisional frequency shifts are analytically solved as a function of the pulse area and the inhomogeneity of the Rabi frequencies. Experimentally measured collisional frequency shifts in an Yb optical lattice clock are in good agreement with the analytical calculations. Based on our analysis, the over-$\\pi$...
Modeling of collisional excited x-ray lasers using short pulse laser pumping
Energy Technology Data Exchange (ETDEWEB)
Sasaki, Akira; Moribayashi, Kengo; Utsumi, Takayuki; Tajima, Toshiki [Japan Atomic Energy Research Inst., Neyagawa, Osaka (Japan). Kansai Research Establishment
1998-03-01
A simple atomic kinetics model of electron collisional excited x-ray lasers has been developed. The model consists of a collisional radiative model using the average ion model (AIM) and a detailed term accounting (DTA) model of Ni-like Ta. An estimate of plasma condition to produce gain in Ni-like Ta ({lambda}=44A) is given. Use of the plasma confined in a cylinder is proposed to preform a uniform high density plasma from 1-D hydrodynamics calculations. (author)
International Nuclear Information System (INIS)
Turnshek, D.A.; Wolfe, A.M.; Lanzetta, K.M.; Briggs, F.H.; Cohen, R.D.
1989-01-01
New intermediate-resolution spectroscopy for six members of a sample of 68 moderate- to high-redshift QSOs is presented. Evidence is reported which indicates that seven strong absorption features in the QSO spectra are due to damped Ly-alpha absorption. A standard curve-of-growth analysis on five of the damped systems is performed, and relevant properties are tabulated and discussed. Six of the seven damped Ly-alpha systems have H I column densities of 2 x 10 to the 20th/sq cm or larger, while the remaining system has an H I column density of about 10 to the 20th/sq cm. It is suggested that damped Ly-alpha systems arise when a sight line intercepts a high-redshift protogalaxy disk containing a quiescent cloud component characterized by high column density and low effective velocity dispersion. At the same time, the sight line usually intercepts a broader turbulent component, which is identified as the halo, characterized by much lower column density and higher effective velocity dispersion. 42 refs
Energy Technology Data Exchange (ETDEWEB)
Yang Wenjiang; Liu Yu; Wen Zheng; Chen Xiaodong; Duan Yi [School of Astronautics, Beijing University of Aeronautics and Astronautics, Beijing 100083 (China)
2008-01-15
In order to investigate the feasible application of a permanent magnet-high-temperature superconductor (PM-HTS) interaction maglev system to a maglev train or a space vehicle launcher, we have constructed a demonstration maglev test vehicle. The force dissipation and damping of the maglev vehicle against external disturbances are studied in a wide range of amplitudes and frequencies by using a sine vibration testing set-up. The dynamic levitation force shows a typical hysteresis behavior, and the force loss is regarded as the hysteresis loss, which is believed to be due to flux motions in superconductors. In this study, we find that the hysteresis loss has weak frequency dependence at small amplitudes and that the dependence increases as the amplitude grows. To analyze the damping properties of the maglev vehicle at different field cooling (FC) conditions, we also employ a transient vibration testing technique. The maglev vehicle shows a very weak damping behavior, and the damping is almost unaffected by the trapped flux of the HTSs in different FC conditions, which is believed to be attributed to the strong pinning in melt-textured HTSs.
Longitudinal oscillations and linear Landau damping in quark-gluon plasma.
Murtaza, G; Khattak, N A D; Shah, H A
2003-12-01
On the basis of the semiclassical kinetic Vlasov equation for quark-gluon plasma and the Yang-Mills equation in covariant gauge, linear Landau damping for electrostatic perturbations such as Langmuir waves is investigated for the extreme-relativistic and strongly relativistic cases. It has been observed that for the extreme-relativistic case, wherein the thermal speed of the particles exceeds the phase velocity of the perturbations, the linear Landau damping is absent as has been reported in the literature. However, a departure from extreme-relativistic case generates an imaginary component of the frequency giving rise to linear Landau damping effect. The relevant integral for the conductivity tensor has been evaluated and the dispersion relation for the longitudinal part of the oscillation was obtained. Further, it is also noted that both the real part of the oscillation frequency and the damping rate are sensitive to the choice of the wave number k and the Debye length lambda(D) associated with quark-gluon plasma.
Yang, Wenjiang; Liu, Yu; Wen, Zheng; Chen, Xiaodong; Duan, Yi
2008-01-01
In order to investigate the feasible application of a permanent magnet-high-temperature superconductor (PM-HTS) interaction maglev system to a maglev train or a space vehicle launcher, we have constructed a demonstration maglev test vehicle. The force dissipation and damping of the maglev vehicle against external disturbances are studied in a wide range of amplitudes and frequencies by using a sine vibration testing set-up. The dynamic levitation force shows a typical hysteresis behavior, and the force loss is regarded as the hysteresis loss, which is believed to be due to flux motions in superconductors. In this study, we find that the hysteresis loss has weak frequency dependence at small amplitudes and that the dependence increases as the amplitude grows. To analyze the damping properties of the maglev vehicle at different field cooling (FC) conditions, we also employ a transient vibration testing technique. The maglev vehicle shows a very weak damping behavior, and the damping is almost unaffected by the trapped flux of the HTSs in different FC conditions, which is believed to be attributed to the strong pinning in melt-textured HTSs.
Segvić Klarić, M; Kosalec, I; Mastelić, J; Piecková, E; Pepeljnak, S
2007-01-01
To characterize antifungal activities of essential oil of thyme (Thymus vulgaris L.) and pure thymol, as comparative substance, on different mould species isolated from damp dwellings. Fifty samples of wall scrapes were collected from damp dwellings in Zagreb, the capital of Croatia. The members of the following mould genera were recovered from the samples: Aspergillus (44%), Penicillium (18%) Alternaria, Ulocladium, Absidia and Mucor (8%) Cladosporium, Trichoderma and Rhizopus (6%), and Chaetomium (2%). Two strains of Stachybotrys chartarum were isolated from damp dwellings in Slovakia. Antifungal activities of the thyme essential oil, which contains p-cymene (36.5%), thymol (33.0%) and 1,8-cineole (11.3%) as main components, and pure thymol were determined by the dilution method and exposure to vaporous phase of the oil. Minimum inhibitory concentrations (MIC) of both thymol and essential oil were bellow 20 microg ml(-1), except for Mucor spp. (50.20 microg ml(-1)). Thymol exhibited approximately three-times stronger inhibition than essential oil of thyme. The vaporous phase of the thyme essential oil (82 microg l(-1)) in glass chambers strongly suppressed the sporulation of moulds during 60 days of exposure. The thyme essential oil possesses a wide range spectrum of fungicidal activity. The vaporous phase of the oil exhibited long-lasting suppressive activity on moulds from damp dwellings. Essential oil of thyme and thymol could be used for disinfection of mouldy walls in the dwellings in low concentration.
Degenerate four-wave mixing and phase conjugation in a collisional plasma
International Nuclear Information System (INIS)
Federici, J.F.; Mansfield, D.K.
1986-06-01
Although degenerate four-wave mixing (DFWM) has many practical applications in the visible regime, no successful attempt has been made to study or demonstrate DFWM for wavelengths longer than 10μm. Recently, Steel and Lam established plasma as a viable DFWM and phase conjugation (PC) medium for infrared, far-infrared, and microwaves. However, their analysis is incomplete since collisional effects were not included. Using a fluid description, our results demonstrate that when collisional absorption is small and the collisional mean-free path is shorter than the nonlinear density grating scale length, collisional heating generates a thermal force which substantially enhances the phase conjugate reflectivity. When the collisional attenuation length becomes comparable to the length of the plasma, the dominant effect is collisional absorption of the pump waves. Numerical estimates of the phase conjugate reflectivity indicate that for modest power levels, gains greater than or equal to1 are possible in the submillimeter to centimeter wavelength range. This suggests that a plasma is a viable PC medium at those long wavelengths. In addition, doubly DFWM is discussed
Energy Technology Data Exchange (ETDEWEB)
Bryant, P M [University of Liverpool, Department of Electrical Engineering and Electronics, Brownlow Hill, Liverpool L69 3GJ (United Kingdom)], E-mail: p.m.bryant@liv.ac.uk
2009-02-01
A finite length cylindrical Langmuir probe is modelled as an ellipsoid of revolution with spheroidal equipotential surfaces and confocal orthogonal hyperboloidal electric field lines. The theory is applicable in the transition regime of probe operation between the collisionless and fully collisional limits. The plasma is assumed to be weakly ionized, non-thermal and stationary, being characterized by frozen reactions and constant temperatures. It is further assumed that in an isotropic plasma the cold ions follow the field lines, as a result of ion-neutral collisions, in the presheath and sheath regions with collisionless Maxwellian electrons. The governing system of equations is derived and solved numerically with the results presented of the presheath and sheath solutions in collisionless and collisional regimes. These show convergence to the respective collisionless and collisional radial motion limits for spherical and cylindrical probes. Analytical approximations are also obtained for the sheath width (defined as the point where the ions reach the Bohm speed) and the Bohm potential over a wide range of collisionality. The collisional presheath drop according to the perturbation theory of Shih and Levi, as applied to cylindrical probes, is shown to significantly underestimate the numerical results. These are in better agreement with the collisional presheath drop for spheres even for long probes. Application of the theory to experimentally derived probe characteristics is also discussed.
Drift wave shear damping annulment due to parametric coupling and magnetic field variation
International Nuclear Information System (INIS)
Davydova, T.A.; Jovanovic, D.; Vranjes, J.; Weiland, J.
1993-01-01
Nonlinear suppression of the drift wave shear damping by the simultaneous action of a strong standing pump wave and of the magnetic field variation along the magnetic field line is studied using a version of the Hasegawa-Mima equation. The threshold for the parametric destabilization is calculated as a function of the plasma parameters. Destabilization occurs due to the elimination of the energy convection towards the dissipative layer, by both the linear toroidal coupling and nonlinear parametric coupling
The influence of damping and source terms on solutions of nonlinear wave equations
Directory of Open Access Journals (Sweden)
Mohammad A. Rammaha
2007-11-01
Full Text Available We discuss in this paper some recent development in the study of nonlinear wave equations. In particular, we focus on those results that deal with wave equations that feature two competing forces.One force is a damping term and the other is a strong source. Our central interest here is to analyze the influence of these forces on the long-time behavior of solutions.
HOM damping and multipacting analysis of the quarter-wave crab cavity
International Nuclear Information System (INIS)
Wu, Q.; Belomestnykh, S.; Ben-Zvi, I.; Calaga, R.
2012-01-01
The quarter-wave crab cavity design has been analyzed further to accommodate LHC requirements. The goal for the design is to provide strong deflecting voltage to the proton bunches at the IP, while keeping the effective length as short as possible. We will evaluate the higher order mode damping with two or four magnetic coupling dampers installed in different configuration. In this paper, we also show possible multipacting locations which are simulated by 2D and 3D codes.
Shao, Ying; Nanayakkara, Gayani; Cheng, Jiali; Cueto, Ramon; Yang, William Y; Park, Joon-Young; Wang, Hong; Yang, Xiaofeng
2017-04-26
We proposed lysophospholipids (LPLs) and LPL-G-protein-coupled receptors (GPCRs) as conditional danger-associated molecular patterns (DAMPs) and conditional DAMP receptors as a paradigm shift to the widely accepted classical DAMP and DAMP receptor model. Recent Advances: The aberrant levels of LPLs and GPCRs activate pro-inflammatory signal transduction pathways, trigger innate immune response, and lead to tissue oxidative and inflammatory injury. Classical DAMP model specifies only the endogenous metabolites that are released from damaged/dying cells as DAMPs, but fails to identify elevated endogenous metabolites secreted from viable/live cells during pathologies as DAMPs. The current classification of DAMPs also fails to clarify the following concerns: (i) Are molecules, which bind to pattern recognition receptors (PRRs), the only DAMPs contributing to inflammation and tissue injury? (ii) Are all DAMPs acting only via classical PRRs during cellular stress? To answer these questions, we reviewed the molecular characteristics and signaling mechanisms of LPLs, a group of endogenous metabolites and their specific receptors and analyzed the significant progress achieved in characterizing oxidative stress mechanisms of LPL mediated tissue injury. Further LPLs and LPL-GPCRs may serve as potential therapeutic targets for the treatment of pathologies induced by sterile inflammation. Antioxid. Redox Signal. 00, 000-000.
Damping in high-temperature superconducting levitation systems
Energy Technology Data Exchange (ETDEWEB)
Hull, John R.
2009-12-15
Methods and apparatuses for improved damping in high-temperature superconducting levitation systems are disclosed. A superconducting element (e.g., a stator) generating a magnetic field and a magnet (e.g. a rotor) supported by the magnetic field are provided such that the superconducting element is supported relative to a ground state with damped motion substantially perpendicular to the support of the magnetic field on the magnet. Applying this, a cryostat housing the superconducting bearing may be coupled to the ground state with high damping but low radial stiffness, such that its resonant frequency is less than that of the superconducting bearing. The damping of the cryostat may be substantially transferred to the levitated magnetic rotor, thus, providing damping without affecting the rotational loss, as can be derived applying coupled harmonic oscillator theory in rotor dynamics. Thus, damping can be provided to a levitated object, without substantially affecting the rotational loss.
Higher order mode damping in an ALS test cavity
International Nuclear Information System (INIS)
Jacob, A.F.; Lamberston, G.R.; Barry, W.
1990-06-01
The higher order mode attenuation scheme proposed for the Advanced Light Source accelerating cavities consists of two broad-band dampers placed 90 degrees apart on the outer edge. In order to assess the damping efficiency a test assembly was built. The HOM damping was obtained by comparing the peak values of the transmission through the cavity for both the damped and the undamped case. Because of the high number of modes and frequency shifts due to the damping gear, the damping was assessed statistically, by averaging over several modes. In the frequency range from 1.5 to 5.5 GHz, average damping greater than 100 was obtained. 1 ref., 6 figs
Air damping effect on the air-based CMUT operation
Cha, Bu-Sang; Kanashima, Takeshi; Lee, Seung-Mok; Okuyama, Masanori
2015-08-01
The vibration amplitude, damping ratio and viscous damping force in capacitive micromachinedultrasonic transducers (CMUTs) with a perforated membrane have been calculated theoretically and compared with the experimental data on its vibration behavior. The electrical bias of the DC and the AC voltages and the operation frequency conditions influence the damping effect because leads to variations in the gap height and the vibration velocity of the membrane. We propose a new estimation method to determine the damping ratio by the decay rate of the vibration amplitudes of the perforated membrane plate are measured using a laser vibrometer at each frequency, and the damping ratios were calculated from those results. The influences of the vibration frequency and the electrostatic force on the damping effect under the various operation conditions have been studied.
Problem of the gyroscopic stabilizer damping
Directory of Open Access Journals (Sweden)
Šklíba J.
2009-06-01
Full Text Available The gyroscopic stabilization of the vibro-isolation system of an ambulance couch is analyzed. This paper follows several previous papers, which concern the derivation of the complete system of appropriate differential equations and some analyses were provided there, as well. It was supposed that mass matrix, stiffness matrix and gyroscope impulse-moment remain constant and the stability of equilibrium state was solved according to different alternatives of the damping and of the radial correction. Little known theorems of the stability were used there. With respect to these theorems, vibro-isolation systems can be classified according to odd or even number of generalized coordinates.
System for damping vibrations in a turbine
Roberts, III, Herbert Chidsey; Johnson, Curtis Alan; Taxacher, Glenn Curtis
2015-11-24
A system for damping vibrations in a turbine includes a first rotating blade having a first ceramic airfoil, a first ceramic platform connected to the first ceramic airfoil, and a first root connected to the first ceramic platform. A second rotating blade adjacent to the first rotating blade includes a second ceramic airfoil, a second ceramic platform connected to the second ceramic airfoil, and a second root connected to the second ceramic platform. A non-metallic platform damper has a first position in simultaneous contact with the first and second ceramic platforms.
Status of the SLC damping rings
International Nuclear Information System (INIS)
Hutton, A.M.; Davies-White, W.A.; Delahaye, J.P.
1985-06-01
Electron beams of full design energy 1.21 GeV and nearly full design intensity 4 x 10 10 particles/pulse (design 5 x 10 10 ) have been extracted from the Stanford Linac and successfully stored in the electron damping ring. Beams of less intensity have been extracted from the ring and reinjected into the Linac. The present intensity limits are not thought to be fundamental. The operating experience with the electron ring and the status of the construction of the positron ring will be discussed. 11 refs., 1 fig., 2 tabs
Transport description of damped nuclear reactions
International Nuclear Information System (INIS)
Randrup, J.
1983-04-01
Part I is an elementary introduction to the general transport theory of nuclear dynamics. It can be read without any special knowledge of the field, although basic quantum mechanics is required for the formal derivation of the general expression for the transport coefficients. The results can also be used in a wider context than the present one. Part II gives the student an up-to-date orientation about recent progress in the understanding of the angular-momentum variables in damped reactions. The emphasis is here on the qualitative understanding of the physics rather than the, at times somewhat tedious, formal derivations
Damping of coherent oscillations in intense ion beams
International Nuclear Information System (INIS)
Karpov, Ivan
2017-01-01
Transverse decoherence of a displaced ion bunch is an important phenomenon in synchrotrons and storage rings. An offset can be caused by an injection error after the bunch-to-bucket transfer between synchrotrons or by an externally generated kick. Decoherence results in a transverse emittance blowup, which can cause particle losses and a beam quality degradation. To prevent the beam blowup, a transverse feedback system (TFS) can be used. The damping time should be shorter than the characteristic decoherence time, which can be strongly affected by the interplay of different intensity effects (e.g., space charge and impedances). This thesis describes the development of the analytical models that explain decoherence and emittance growth with chromaticity, space charge, and image charges within the first synchrotron period. The pulsed response function including intensity effects was derived from the model for beam transfer functions. For a coasting beam, the two- dimensional model shows that space charge slows down and above intensity threshold suppresses decoherence. These predictions were confirmed by particle tracking simulations with self-consistent space charge fields. Additionally, halo buildup and losses during decoherence were observed in simulations. These effects were successfully interpreted using a non self-consistent particle-core model. The two-dimensional model was extended to the bunched beams. The simulation results reproduce the analytical predictions. The intensity threshold of decoherence suppression is higher in comparison to a coasting beam, image charges can restore decoherence. In the present work dedicated experiments were performed in the SIS18 synchrotron at GSI Darmstadt and the results were compared with simulations and analytical predictions. The contribution of nonlinearities and image charges is negligible while chromaticity and space charge dominate decoherence. To study the damping efficiency of TFS, a comprehensive TFS module was
Confirmation of soil radiation damping from test versus analysis
International Nuclear Information System (INIS)
Eidinger, J.M.; Mukhim, G.S.; Desmond, T.P.
1987-01-01
The work was performed to demonstrate that soil-structure interaction effects for nuclear plant structures can be accurately (and conservatively) predicted using the finite element or soil spring methods of soil-structure interaction analysis. Further, the work was done to investigate the relative importance of soil radiation versus soil material damping in the total soil damping analytical treatment. The analytical work was benchmarked with forced vibration tests of a concrete circular slab resting on the soil surface. The applied loading was in the form of a suddenly applied pulse load, or snapback. The measured responses of the slap represent the free vibration of the slab after the pulse load has been applied. This simplifies the interpretation of soil damping, by the use of the logarithmic decay formulation. To make comparisons with the test results, the damping data calculated from the analytical models is also based on the logarithmic decay formulation. An attempt is made to differentiate the observed damped behavior of the concrete slab as being caused by soil radiation versus soil material damping. It is concluded that both the traditional soil radiation and material damping analytical simplifications are validated by the observed responses. It is concluded that arbitrary 'conservative' assumptions traditionally made in nuclear plant soil-structure interaction analyses are indeed arbitrary, and not born out by physical evidence. The amount of conservatism introduced by limiting total soil damping to values like 5% to 10% can be large. For the test slab sizes investigated, total soil damping is about 25%. For full size nuclear plant foundations, total soil damping is commonly in the 35% to 70% range. The authors suggest that full soil damping values (the combined radiation and material damping) should be used in the design, backfit and margin assessment of nuclear plants. (orig./HP)
Confinement-dependent damping in a layered liquid
International Nuclear Information System (INIS)
De Beer, Sissi; Van den Ende, Dirk; Mugele, Frieder
2011-01-01
We present atomic force microscopy (AFM) measurements of the conservative oscillatory solvation forces and the damping in confined films of octamethylcyclotetrasiloxane using small amplitude modulation with magnetic driving. We find distinct maxima in the interaction damping upon probing the discrete molecular layers, supporting earlier observations of the same phenomenon using AFM with an acoustic driving scheme. The maxima in the damping are located at the same tip-surface separation as the maxima in the conservative oscillatory interaction stiffness. (fast track communication)
Rising damp in building walls: the wall base ventilation system
Energy Technology Data Exchange (ETDEWEB)
Guimaraes, A.S.; Delgado, J.M.P.Q.; Freitas, V.P. de [Faculdade de Engenharia da Universidade do Porto, Laboratorio de Fisica das Construcoes (LFC), Departamento de Engenharia Civil, Porto (Portugal)
2012-12-15
This work intends to validate a new system for treating rising damp in historic buildings walls. The results of laboratory experiments show that an efficient way of treating rising damp is by ventilating the wall base, using the HUMIVENT technique. The analytical model presented describes very well the observed features of rising damp in walls, verified by laboratory tests, who contributed for a simple sizing of the wall base ventilation system that will be implemented in historic buildings. (orig.)
DEFF Research Database (Denmark)
Wiesen, S.; Fundamenski, W.; Wischmeier, M.
2011-01-01
A revised formulation of the perpendicular diffusive transport model in 2D multi-fluid edge codes is proposed. Based on theoretical predictions and experimental observations a dependence on collisionality is introduced into the transport model of EDGE2D–EIRENE. The impact on time-dependent JET gas...... fuelled ramp-up scenario modelling of the full transient from attached divertor into the high-recycling regime, following a target flux roll over into divertor detachment, ultimately ending in a density limit is presented. A strong dependence on divertor geometry is observed which can mask features...... of the new transport model: a smoothly decaying target recycling flux roll over, an asymmetric drop of temperature and pressure along the field lines as well as macroscopic power dependent plasma oscillations near the density limit which had been previously observed also experimentally. The latter effect...
Modeling vibration response and damping of cables and cabled structures
Spak, Kaitlin S.; Agnes, Gregory S.; Inman, Daniel J.
2015-02-01
In an effort to model the vibration response of cabled structures, the distributed transfer function method is developed to model cables and a simple cabled structure. The model includes shear effects, tension, and hysteretic damping for modeling of helical stranded cables, and includes a method for modeling cable attachment points using both linear and rotational damping and stiffness. The damped cable model shows agreement with experimental data for four types of stranded cables, and the damped cabled beam model shows agreement with experimental data for the cables attached to a beam structure, as well as improvement over the distributed mass method for cabled structure modeling.
Damping element for reducing the vibration of an airfoil
Campbell, Christian X; Marra, John J
2013-11-12
An airfoil (10) is provided with a tip (12) having an opening (14) to a center channel (24). A damping element (16) is inserted within the opening of the center channel, to reduce an induced vibration of the airfoil. The mass of the damping element, a spring constant of the damping element within the center channel, and/or a mounting location (58) of the damping element within the center channel may be adjustably varied, to shift a resonance frequency of the airfoil outside a natural operating frequency of the airfoil.
Structural dynamic analysis with generalized damping models analysis
Adhikari , Sondipon
2013-01-01
Since Lord Rayleigh introduced the idea of viscous damping in his classic work ""The Theory of Sound"" in 1877, it has become standard practice to use this approach in dynamics, covering a wide range of applications from aerospace to civil engineering. However, in the majority of practical cases this approach is adopted more for mathematical convenience than for modeling the physics of vibration damping. Over the past decade, extensive research has been undertaken on more general ""non-viscous"" damping models and vibration of non-viscously damped systems. This book, along with a related book
Performance Characteristics of the Magnetic Constrained Layer Damping
Directory of Open Access Journals (Sweden)
A. Baz
2000-01-01
Full Text Available A new class of surface damping treatment is proposed to provide effective means for attenuating undesirable structural vibrations. The proposed treatment relies in its operation on the use of smart damping treatments which consist of integrated arrays of constrained visco-elastic damping layers that are controlled passively by a specially arranged network of permanent magnets. The interaction between the magnets and the visco-elastic layers aims at enhancing the energy dissipation characteristics of the damping treatments. In this manner, it would be possible to manufacture structures that are light in weight which are also capable of meeting strict constraints on structural vibration when subjected to unavoidable disturbances.
Macroscopic damping model for structural dynamics with random polycrystalline configurations
Yang, Yantao; Cui, Junzhi; Yu, Yifan; Xiang, Meizhen
2017-12-01
In this paper the macroscopic damping model for dynamical behavior of the structures with random polycrystalline configurations at micro-nano scales is established. First, the global motion equation of a crystal is decomposed into a set of motion equations with independent single degree of freedom (SDOF) along normal discrete modes, and then damping behavior is introduced into each SDOF motion. Through the interpolation of discrete modes, the continuous representation of damping effects for the crystal is obtained. Second, from energy conservation law the expression of the damping coefficient is derived, and the approximate formula of damping coefficient is given. Next, the continuous damping coefficient for polycrystalline cluster is expressed, the continuous dynamical equation with damping term is obtained, and then the concrete damping coefficients for a polycrystalline Cu sample are shown. Finally, by using statistical two-scale homogenization method, the macroscopic homogenized dynamical equation containing damping term for the structures with random polycrystalline configurations at micro-nano scales is set up.
Amplitude dependent damping in single crystalline high purity molybdenum
International Nuclear Information System (INIS)
Zelada-Lambri, G.I; Lambri, O.A; Garcia, J.A; Lomer, J.N
2004-01-01
Amplitude dependent damping measurements were performed on high purity single crystalline molybdenum at several different constant temperatures between room temperature and 1273K. The employed samples were single crystals with the orientation, having a residual resistivity ratio of about 8000. Previously to the amplitude dependent damping tests, the samples were subjected to different thermomechanical histories. Amplitude dependent damping effects appear only during the first heating run in temperature where the samples have the thermomechanical state of the deformation process at room temperature. In the subsequent run-ups in temperature, i.e, after subsequent annealings, amplitude dependent damping effects were not detected (au)
Collisional drift fluid equations and implications for drift waves
International Nuclear Information System (INIS)
Pfirsch, Dieter; Correa-Restrepo, Dario
1996-01-01
The usual theoretical description of drift-wave turbulence (considered to be one possible cause of anomalous transport in a plasma), e.g. the Hasegawa-Wakatani theory, makes use of various approximations, the effects of which are extremely difficult to assess. This concerns in particular the conservation laws for energy and momentum. The latter law is important in relation to charge separation and the resulting electric fields, which are possibly related to the L-H transition. Energy conservation is crucial to the stability behaviour, it will be discussed by means of an example. New collisional multi-species drift-fluid equations were derived by a new method which yields, in a transparent way, conservation of energy and total angular momentum and the law for energy dissipation. Both electrostatic and electromagnetic field variations are considered. The only restriction involved is the validity of the drift approximation; in particular, there are no assumptions restricting the geometry of the system. The method is based primarily on a Lagrangian for dissipationless fluids in the drift approximation with isotropic pressures. The dissipative terms are introduced by adding corresponding terms to the ideal equations of motion and of the pressures. The equations of motion, of course, no longer result from a Lagrangian via Hamilton's principle. However, their relation to the ideal equations also implies a relation to the ideal Lagrangian, which can be used to advantage. Instead of introducing heat conduction one can also assume isothermal behaviour, e.g. T v (x) = constant. Assumptions of this kind are often made in the literature. The new method of introducing dissipation is not restricted to the present kind of theory; it can equally well be applied to theories such as multi-fluid theories without using the drift approximation of the present paper. (author)
Spin states of asteroids in the Eos collisional family
Hanuš, J.; Delbo', M.; Alí-Lagoa, V.; Bolin, B.; Jedicke, R.; Ďurech, J.; Cibulková, H.; Pravec, P.; Kušnirák, P.; Behrend, R.; Marchis, F.; Antonini, P.; Arnold, L.; Audejean, M.; Bachschmidt, M.; Bernasconi, L.; Brunetto, L.; Casulli, S.; Dymock, R.; Esseiva, N.; Esteban, M.; Gerteis, O.; de Groot, H.; Gully, H.; Hamanowa, Hiroko; Hamanowa, Hiromi; Krafft, P.; Lehký, M.; Manzini, F.; Michelet, J.; Morelle, E.; Oey, J.; Pilcher, F.; Reignier, F.; Roy, R.; Salom, P. A.; Warner, B. D.
2018-01-01
Eos family was created during a catastrophic impact about 1.3 Gyr ago. Rotation states of individual family members contain information about the history of the whole population. We aim to increase the number of asteroid shape models and rotation states within the Eos collision family, as well as to revise previously published shape models from the literature. Such results can be used to constrain theoretical collisional and evolution models of the family, or to estimate other physical parameters by a thermophysical modeling of the thermal infrared data. We use all available disk-integrated optical data (i.e., classical dense-in-time photometry obtained from public databases and through a large collaboration network as well as sparse-in-time individual measurements from a few sky surveys) as input for the convex inversion method, and derive 3D shape models of asteroids together with their rotation periods and orientations of rotation axes. We present updated shape models for 15 asteroids and new shape model determinations for 16 asteroids. Together with the already published models from the publicly available DAMIT database, we compiled a sample of 56 Eos family members with known shape models that we used in our analysis of physical properties within the family. Rotation states of asteroids smaller than ∼ 20 km are heavily influenced by the YORP effect, whilst the large objects more or less retained their rotation state properties since the family creation. Moreover, we also present a shape model and bulk density of asteroid (423) Diotima, an interloper in the Eos family, based on the disk-resolved data obtained by the Near InfraRed Camera (Nirc2) mounted on the W.M. Keck II telescope.
Collisional alignment and orientation of atomic outer shells. Pt. 1
International Nuclear Information System (INIS)
Andersen, N.; Gallagher, J.W.; Hertel, I.V.
1988-01-01
The study of polarization of atomic radiation emitted after impact excitation has yielded an enormous wealth of detailed information on the mechanism and dynamics of collisional excitation and energy transfer, both in electron and heavy particle impact studies. In these studies, the beam of electrons, ions or fast atoms used to excite the target atoms provides a suitable quantization axis with respect to which the polarization of the fluorescent light of the excited atoms is detected. From these data information on the cross sections for the different magnetic substates of the excited atom is extracted, imparting a great deal of insight into impact mechanisms for both outer and inner shell excitation. It is our aim to provide a comprehensive review including all data available in the literature presented in a standardized and easily accessible fashion. In this review we include only alignment and orientation studies, which have a well-defined planar symmetry, i.e., in which the initial and final relative momentum of the interacting particles are well defined by differential scattering techniques. We do not make a major distinction between heavy-particle and electron impact excitation: In fact, one of our aims is to demonstrate similarities between the two fields from a technical as well as from a conceptual point of view. The review is divided into three parts: This first part (I) deals with direct excitation of atoms by electrons and fast atoms or ions. Section 2 gives an introduction to the general concepts and ideas behind this kind of study and a description of typical experimental setups. Section 3 deals with electron impact excitation of atoms, starting with the simplest case of electron-helium collisions which may be fully described by two parameters, followed by more complex cases such as electron impact excitation of hydrogen and the heavy rare gases. Section 4 describes the results for direct excitation by atomic impact. (orig./AH)
Impulsive parametric damping in energy harvesting
International Nuclear Information System (INIS)
Tehrani, Maryam Ghandchi; Pumhoessel, Thomas
2016-01-01
In this paper, an electro-mechanical system with a time-varying damper, which is capable of changing the damping coefficient impulsively, is considered. The effect of the impulsive parametric damping to the modal energy content of the mechanical system is investigated analytically as well as numerically. First, the governing differential equation is presented and then the solution of the system's response is obtained through numerical integration. The energy dissipated by the damper is then calculated to investigate the amount of the energy that can be harvested, and the results are compared with the results from a system without parametric impulses. It is shown, that the amount of the harvested energy can be increased by introducing parametric impulses. Then, an analytical formulation is derived for the system using Dirac-Delta impulses and the analytical results are validated with numerical simulations. The device is subjected to an initial condition and therefore is vibrating freely without any base excitation. This could be used for applications such as harvesting energy from the passage of a train, where the train vibration can introduce an initial velocity to the harvester and the energy can then be extracted from the free vibration of the harvester. (paper)
Wilczynski, J; SiwekWilczynska, K; Wilschut, HW
Nonfusion, fissionlike reactions in collisions of four heavy systems (well below the fusion extra-push energy threshold), Mr which Hinde and co-workers had measured the prescission neutron multiplicities, have been analyzed in terms of the deterministic dynamic model of Feldmeier coupled to a
Excitation and damping of transversal oscillation in coronal loops by wake phenomena
Directory of Open Access Journals (Sweden)
A abedini
2018-02-01
Full Text Available Transversal oscillation of coronal loops that are interpreted as signatures of magneto hydrodynamics (MHD waves are observed frequently in active region corona loops. The amplitude of this oscillation has been found to be strongly attenuated. The damping of transverse oscillation may be produced by the dissipation mechanism and the wake of the traveling disturbance. The damping of transversal loop oscillations with wake phenomena is not related to any dissipation mechanism. Also, these kinds of coronal loop oscillations are not related to the kink mode, although this mode can be occurred after the attenuation process by the energy of the wave packet deposited in the loop. In this paper the excitation and damping of transversal coronal loop oscillations with wake of traveling wave packet is discussed in detail, both theoretically and observationally. Here, the transversal coronal loop oscillations is modeled with a one dimensional simple line-tied. The dynamics of the loop and the coronal is governed by the Klein–Gordon differential equation. A localized disturbance that can be generated by nearby flare produces a perturbation that undergoes dispersion as it propagates toward the loop. As a consequence, the amplitudes of oscillates decay with time roughly t-1/2 at the external cutoff frequency. These observed data on 2016-Dec-4 by Atmospheric Imaging Assembly (AIA onboard Solar Dynamic Observatory (SDO observations data, consisting of 560 images with an interval of 24 seconds in the 171 A0 pass band is analyzed for evidence of excitation and damping of transverse oscillations of coronal loop that is situated near a flare. In this analyzed signatures of transverse oscillations that are damped rapidly were found, with periods in the range of P=18.5-23.85 minutes. Furthermore, oscillation of loop segments attenuate with time roughly as t-α that average values of α for 4 different loops change form 0.65-0.80. The magnitude values of α are in
Bounce-harmonic Landau Damping of Plasma Waves
Anderegg, Francois
2015-11-01
We present measurement of plasma wave damping, spanning the temperature regimes of direct Landau damping, bounce-harmonic Landau damping, inter-species drag damping, and viscous damping. Direct Landau damping is dominant at high temperatures, but becomes negligible as v vph / 5 . The measurements are conducted in trapped pure ion plasmas contained in Penning-Malmberg trap, with wave-coherent LIF diagnostics of particle velocities. Our focus is on bounce harmonics damping, controlled by an applied ``squeeze'' potential, which generates harmonics in the wave potential and in the particle dynamics. A particle moving in z experiences a non-sinusoidal mode potential caused by the squeeze, producing high spatial harmonics with lower phase velocity. These harmonics are Landau damped even when the mode phase velocity vph is large compared to the thermal velocity v , since the nth harmonic is resonant with a particle bouncing at velocity vb =vph / n . Here we increase the bounce harmonics through applied squeeze potential; but some harmonics are always present in finite length systems. For our centered squeeze geometry, theory shows that only odd harmonics are generated, and predicts the Landau damping rate from vph / n . Experimentally, the squeeze potential increases the wave damping and reduces its frequency. The frequency shift occurs because the squeeze potential reduces the number of particle where the mode velocity is the largest, therefore reducing the mode frequency. We observe an increase in the damping proportional to Vs2,and a frequency reduction proportional to Vs , in quantitative agreement with theory. Wave-coherent laser induced fluorescence allows direct observation of bounce resonances on the particle distribution, here predominantly at vph / 3 . A clear increase of the bounce harmonics is visible on the particle distribution when the squeeze potential is applied. Supported by NSF Grant PHY-1414570, and DOE Grants DE-SC0002451 and DE-SC0008693.
Strong Coupling between Plasmons and Organic Semiconductors
Directory of Open Access Journals (Sweden)
Joel Bellessa
2014-05-01
Full Text Available In this paper we describe the properties of organic material in strong coupling with plasmon, mainly based on our work in this field of research. The strong coupling modifies the optical transitions of the structure, and occurs when the interaction between molecules and plasmon prevails on the damping of the system. We describe the dispersion relation of different plasmonic systems, delocalized and localized plasmon, coupled to aggregated dyes and the typical properties of these systems in strong coupling. The modification of the dye emission is also studied. In the second part, the effect of the microscopic structure of the organics, which can be seen as a disordered film, is described. As the different molecules couple to the same plasmon mode, an extended coherent state on several microns is observed.
Some Passive Damping Sources on Flooring Systems besides the TMD
DEFF Research Database (Denmark)
Pedersen, Lars
2010-01-01
damping to the structure. Basically also passive humans on a floor act as a damping source, but it also turns out from doing system identification tests with a floor strip that a quite simple set-up installed on the floor (cheap and readily at hand) might do a good job in terms of reducing vertical floor...
The effect of damping on the perception of hardness
van Beek, F.E.; Heck, D.J.F.; Nijmeijer, H.; Bergmann Tiest, W.M.; Kappers, A.M.L.
2015-01-01
In controlling teleoperation systems subject to communication delays, unstable behavior is often prevented by injecting damping. A proper perception of hardness is required to efficiently interact with an object, but it is unknown if and how this injected damping influences the perceived hardness of
Complex modes and frequencies in damped structural vibrations
DEFF Research Database (Denmark)
Krenk, Steen
2004-01-01
It is demonstrated that the state space formulation of the equation of motion of damped structural elements like cables and beams leads to a symmetric eigenvalue problem if the stiffness and damping operators are self-adjoint, and that this is typically the case in the absence of gyroscopic forces...
On acoustic damping of a cylindrical chamber in resonant modes
Shimizu, Taro; Hori, Dan; Yoshida, Seiji; Tachibana, Shigeru; Matsuyama, Shingo; Shinjo, Junji; Mizobuchi, Yasuhiro; Kobayashi, Kan
2012-08-01
Acoustic damping of a cylindrical chamber with open and closed ends in resonant modes is analytically and numerically investigated to understand the low damping characteristic of the chamber without chocked nozzle. First, on the basis of the analytic solution of resonant acoustic modes inside a cylinder, the damping by radiation from the open end is calculated analytically using simple acoustic source modeling for velocity fluctuation. The effect of viscosity is also considered as an attenuation mechanism. The values of acoustic damping calculated for the first longitudinal and tangential modes are in good agreement with the corresponding values obtained using numerical simulation. The damping is also investigated for a configuration of the chamber with an injector installed off-center. Finally, we numerically and semi-analytically investigate the acoustic damping for a configuration that includes a hot-gas injection. The obtained mode is found to be a spinning tangential mode and the radiated wave also has a spinning feature. The damping for the spinning tangential mode is found to be larger than that for the symmetric dipole-like radiation under a uniform standing condition, but much smaller than the chamber with a chocked nozzle. Therefore, the chamber with an open end has the low damping characteristic suitable for intentionally generating oscillatory combustion.
PID motion control tuning rules in a damping injection framework
Tadele, T.S.; de Vries, Theodorus J.A.; Stramigioli, Stefano
2013-01-01
This paper presents a general design approach for a performance based tuning of a damping injection framework impedance controller by using insights from PID motion control tuning rules. The damping injection framework impedance controller is suitable for human friendly robots as it enhances safety
Equivalent viscous damping procedure for multi-material systems
International Nuclear Information System (INIS)
Ahmed, H.; Ma, D.
1979-01-01
The inclusion of accurate viscous damping effects in the seismic analysis of nuclear power plants is discussed. A procedure to evaluate and use equivalent viscous damping coefficients in conjunction with the substructure method of finite element analysis is outlined in detail
Simple model with damping of the mode-coupling instability
Energy Technology Data Exchange (ETDEWEB)
Pestrikov, D.V. [AN SSSR, Novosibirsk (Russian Federation). Inst. Yadernoj Fiziki
1996-08-01
In this paper we use a simple model to study the suppression of the transverse mode-coupling instability. Two possibilities are considered. One is due to the damping of particular synchrobetatron modes, and another - due to Landau damping, caused by the nonlinearity of betatron oscillations. (author)
On aspects of boundary damping for cables and vertical beams
Hijmissen, J.W.
2008-01-01
Elastic structures are susceptible to wind- and earthquake-induced vibrations. These vibrations can damage a structure or cause human discomfort. To suppress structural vibrations, various types of damping mechanisms, active or passive, can be applied. In this thesis the model of a weakly damped,
Damping characteristics of a footbridge: Mysteries and truths
DEFF Research Database (Denmark)
Cantieni, Reto; Bajric, Anela; Brincker, Rune
2016-01-01
As a consequence of a paper presented by Michael Mistler at the VDI-Baudynamik-Tagung in Kassel, Germany, in April 2015, the authors checked the damping coefficients having been estimated for a footbridge in autumn 2014. Mistler stated that the critical damping ratio estimated from a halfpower ba...
Dynamic stability of a lightly damped column trapped by a ...
African Journals Online (AJOL)
In this paper we initiate an analytical approach for determining the dynamic buckling load of a finite viscously damped column acted upon by a harmonically slowly varying explicitly time dependent load. The viscous damping is considered light and the column rests on an elastic foundation that produces a nonlinear ...
Semilinear damped wave equation in locally uniform spaces
Czech Academy of Sciences Publication Activity Database
Michálek, Martin; Pražák, D.; Slavík, J.
2017-01-01
Roč. 16, č. 5 (2017), s. 1673-1695 ISSN 1534-0392 EU Projects: European Commission(XE) 320078 - MATHEF Institutional support: RVO:67985840 Keywords : damped wave equations * nonlinear damping * unbounded domains Subject RIV: BA - General Mathematics OBOR OECD: Pure mathematics Impact factor: 0.801, year: 2016 http://www.aimsciences.org/journals/displayArticlesnew.jsp?paperID=14110
Design of the SLC damping ring to linac transport lines
International Nuclear Information System (INIS)
Fieguth, T.H.; Murray, J.J.
1983-07-01
The first and second order optics for the damping ring to linac transport line are designed to preserve the damped transverse emittance while simultaneously compressing the bunch length of the beam to that length required for reinjection into the linac. This design, including provisions for future control of beam polarization, is described
Semilinear damped wave equation in locally uniform spaces
Czech Academy of Sciences Publication Activity Database
Michálek, Martin; Pražák, D.; Slavík, J.
2017-01-01
Roč. 16, č. 5 (2017), s. 1673-1695 ISSN 1534-0392 EU Projects: European Commission(XE) 320078 - MATHEF Institutional support: RVO:67985840 Keywords : damped wave equations * nonlinear damping * unbounded domains Subject RIV: BA - General Mathematics OBOR OECD: Pure mathematics Impact factor: 0.801, year: 2016 http://www.aimsciences.org/ journals /displayArticlesnew.jsp?paperID=14110
Quantum theory of damped harmonic oscillator | Antia | Global ...
African Journals Online (AJOL)
The exact solutions of the Schrödinger equation for damped harmonic oscillator with pulsating mass and modified Caldirola-Kanai Hamiltonian are evaluated. We also investigated the case of under-damped for the two models constructed and the results obtained in both cases do not violate Heisenberg uncertainty principle ...
Fire damp gas in a heavy water reactor
International Nuclear Information System (INIS)
Nikolic, V.D.
1963-01-01
This document describes the process of fire damp gas creation in the reactor core and dependence of the gas percentage on the temperature, i.e. reactor power. It contains a detailed plan for measuring the the percent of fire damp gas at the RA reactor: before start-up, after longer shut-down periods, immediately after safety shutdown, periodically during operation campaign
Influence of collisional rate coefficients on water vapour excitation
Daniel, F.; Goicoechea, J. R.; Cernicharo, J.; Dubernet, M.-L.; Faure, A.
2012-11-01
Context. Water is a key molecule in many astrophysical studies that deal with star or planet forming regions, evolved stars, and galaxies. Its high dipole moment makes this molecule subthermally populated under the typical conditions of most astrophysical objects. This motivated calculation of various sets of collisional rate coefficients (CRC) for H2O (with He or H2), which are needed to model its rotational excitation and line emission. Aims: The most accurate set of CRC are the quantum rates that involve H2. However, they have been published only recently, and less accurate CRC (quantum with He or quantum classical trajectory (QCT) with H2) were used in many studies before that. This work aims to underline the impact that the new available set of CRC have on interpretations of water vapour observations. Methods: We performed accurate non-local, non-LTE radiative transfer calculations using different sets of CRC to predict the line intensities from transitions that involve the lowest energy levels of H2O (E work, we find that the intensities based on the quantum and QCT CRC are in good agreement. However, at relatively low H2 volume density (n(H2) < 107 cm-3) and low water abundance (χ(H2O) < 10-6), which corresponds to physical conditions relevant when describing most molecular clouds, we find differences in the predicted line intensities of up to a factor of ~3 for the bulk of the lines. Most of the recent studies interpreting early Herschel Space Observatory spectra have used the QCT CRC. Our results show that, although the global conclusions from those studies will not be drastically changed, each case has to be considered individually, since depending on the physical conditions, the use of the QCT CRC may lead to a mis-estimate of the water vapour abundance of up to a factor of ~3. Additionally, the comparison of the quantum state-to-state and thermalised CRC, including the description of the population of the H2 rotational levels, show that above TK ~ 100
Howes, Gregory G.; McCubbin, Andrew J.; Klein, Kristopher G.
2017-10-01
Understanding the removal of energy from turbulent fluctuations in a magnetized plasma and the consequent energization of the constituent plasma particles is a major goal of heliophysics and astrophysics. Previous work has shown that nonlinear interactions among counterpropagating Alfven waves-or Alfven wave collisions-are the fundamental building block of astrophysical plasma turbulence and naturally generate current sheets in strong turbulence. A nonlinear gyrokinetic simulation of a strong Alfven wave collision is used to examine the damping of the electromagnetic fluctuations and the associated energization of particles that occurs in self-consistently generated current sheets. A simple model explains the flow of energy due to the collisionless damping and the associated particle energization, as well as the subsequent thermalization of the particle energy by collisions. Using the recently developed field-particle correlation technique, we show that particles resonant with the Alfven waves in the simulation dominate the energy transfer, demonstrating conclusively that Landau damping plays a key role in the spatially intermittent damping of the electromagnetic fluctuations and consequent energization of the particles in this strongly nonlinear simulation. NSF CAREER Award No. AGS-1054061.
Correction of vertical dispersion and betatron coupling for the CLIC damping ring
Korostelev, M S
2006-01-01
The sensitivity of the CLIC damping ring to various kinds of alignment errors has been studied. Without any correction, fairly small vertical misalignments of the quadrupoles and, in particular, the sextupoles, introduce unacceptable distortions of the closed orbit as well as intolerable spurious vertical dispersion and coupling due to the strong focusing optics of the damping ring. A sophisticated beam-based correction scheme has been developed to bring the design target emittances and the dynamic aperture back to the ideal value. The correction using dipolar correctors and several skew quadrupole correctors allows a minimization of the closed-orbit distortion, the cross-talk between vertical and horizontal closed orbits, the residual vertical dispersion and the betatron coupling.
Beam dynamics and wakefield suppression in interleaved damped and detuned structures for CLIC
D'Elia, A; Khan, V F; Jones, R M; Latina, A; Nesmiyan, I; Riddone, G
2013-01-01
Acceleration of multiple bunches of charged particles in the main linacs of the Compact Linear Collider (CLIC) with high accelerating fields provides two major challenges: firstly, to ensure the surface electromagnetic fields do not cause electrical breakdown and subsequent surface damage, and secondly, to ensure the beam-excited wakefields are sufficiently suppressed to avoid appreciable emittance dilution. In the baseline design for CLIC, heavy wakefield suppression is used (Q ~ 10) [1] and this ensures the beam quality is well-preserved [2]. Here we discuss an alternative means to suppress the wakefield which relies on strong detuning of the cell dipole frequencies, together with moderate damping, effected by manifolds which are slot-coupled to each accelerating cell. This damped and detuned wakefield suppression scheme is based on the methodology developed for the Japanese Linear Collider/Next Linear Collider (JLC/NLC) [3]. Here we track the multi-bunch beam down the complete collider, u...
Phonon-like dynamics in glasses: Coupling between damping and fragility
International Nuclear Information System (INIS)
Bove, Livia E.; Petrillo, C.; Fontana, A.; Ivanov, A.; Dreyfus, C.; Sokolov, A.P.
2006-01-01
The high-frequency dynamics of two strong glasses, v-GeO 2 and v-ZnCl 2 , were studied by means of inelastic neutron scattering experiments carried out with three triple-axis spectrometers in order to selectively access either a wide kinematic region or a high-energy resolution. The experimental spectra show well-defined dispersive acoustic excitations coexisting with non-dispersive waves. A thorough analysis of the inelastic line shape of longitudinal acoustic excitations provides estimates of the damping factors, which can be compared to the results of several earlier inelastic X-ray estimates for a wide class of inorganic glasses. A striking relation is observed between the microscopic damping of phonon-like modes in these glasses well below T g and the fragility of the supercooled liquids approaching the glass transition, thus suggesting new means of investigation of the glass transition phenomenology
Study on A Control Method of PAPF for Resonance Damping and Harmonics Compensation in Power System
DEFF Research Database (Denmark)
Zhou, Fang; Wu, Longhui; Chen, Zhe
2009-01-01
In power system, capacitors are widely used to compensate reactive power, which generally cause resonance problems in harmonic distorted network. In this paper, A method of using a parallel active power filter (PAPF) to damp the resonances is proposed. The proposed method is compound with traditi......In power system, capacitors are widely used to compensate reactive power, which generally cause resonance problems in harmonic distorted network. In this paper, A method of using a parallel active power filter (PAPF) to damp the resonances is proposed. The proposed method is compound...... with traditional method, it shows that whether the capacitor current is included in the detecting current of PAPF or not. Also the PAPF with proposed method has strong ability in harmonic compensation. Finally, the experiment results are presented to verify the analysis....
Nonlinear piping damping and response predictions
International Nuclear Information System (INIS)
Severud, L.K.; Weiner, E.O.; Lindquist, M.R.; Anderson, M.J.; Wagner, S.E.
1986-10-01
The high level dynamic testing of four prototypic piping systems, used to provide benchmarks for analytical prediction comparisons, is overviewed. The size of pipe tested ranged from one-inch to six-inches in diameter and consisted of carbon steel or stainless steel material. Failure of the tested systems included progressive gross deformation or some combination of ratchetting-fatigue. Pretest failure predictions and post test comparisons using simplified elastic and elasto-plastic methods are presented. Detailed non-linear inelastic analyses are also shown, along with a typical ratchet-fatigue failure calculation. A simplified method for calculating modal equivalent viscous damping for snubbers and plastic hinges is also described. Conclusions are made regarding the applicability of the various analytical failure predictive methods and recommendations are made for future analytic and test efforts
problem for the damped Boussinesq equation
Directory of Open Access Journals (Sweden)
Vladimir V. Varlamov
1997-01-01
Full Text Available For the damped Boussinesq equation utt−2butxx=−αuxxxx+uxx+β(u2xx,x∈(0,π,t>0;α,b=const>0,β=const∈R1, the second initial-boundary value problem is considered with small initial data. Its classical solution is constructed in the form of a series in small parameter present in the initial conditions and the uniqueness of solutions is proved. The long-time asymptotics is obtained in the explicit form and the question of the blow up of the solution in a certain case is examined. The possibility of passing to the limit b→+0 in the constructed solution is investigated.
Vibration-damping structure for reactor building
International Nuclear Information System (INIS)
Kuno, Toshio; Iba, Chikara; Tanaka, Hideki; Kageyama, Mitsuru
1998-01-01
In a damping structure of a reactor building, an inner concrete body and a reactor container are connected by way of a vibration absorbing member. As the vibration absorbing member, springs or dampers are used. The inner concrete body and the reactor container each having weight and inherent frequency different from each other are opposed displaceably by way of the vibration absorbing member thereby enabling to reduce seismic input and reduce shearing force at least at leg portions. Accordingly, seismic loads are reduced to increase the grounding rate of the base thereby enabling to satisfy an allowable value. Therefore, it is not necessary to strengthen the inner concrete body and the reactor container excessively, the amount of reinforcing rods can be reduced, and the amount of a portion of the base buried to the ground can be reduced thereby enabling to constitute the reactor building easily. (N.H.)
Research on the Multilayer Free Damping Structure Design
Directory of Open Access Journals (Sweden)
Jie Meng
2018-01-01
Full Text Available The aim of this paper is to put forward a design model for multilayer free damping structures. It sets up a mathematical model and deduces the formula for its structural loss factor η and analyzes the change rules of η along with the change rate of the elastic modulus ratio q1, the change rate of the loss factors of damping materials q2, and the change rate of the layer thickness ratio q3 under the condition with the layer thickness ratio h2=1,3,5,10 by software MATLAB. Based on three specific damping structures, the mathematical model is verified through ABAQUS. With the given structural loss factor (η≥2 and the layer number (n=3,4,5,6, 34 kinds of multilayer free damping structures are then presented. The study is meant to provide a more flexible and more diverse design solution for multilayer free damping structures.
Cost damping and functional form in transport models
DEFF Research Database (Denmark)
Rich, Jeppe; Mabit, Stefan Lindhard
2016-01-01
take different forms and be represented as a non-linear-in-parameter form such as the well-known Box–Cox function. However, it could also be specified as non-linear-in-cost but linear-in-parameter forms, which are easier to estimate and improve model fit without increasing the number of parameters....... The specific contributions of the paper are as follows. Firstly, we discuss the phenomenon of cost damping in details and specifically why it occurs. Secondly, we provide a test of damping and an easy assessment of the (linear) damping rate for any variable by estimating two auxiliary linear models. This turns......Transport models allowing for cost damping are characterised by marginally decreasing cost sensitivities in demand. As a result, cost damping is a model extension of the simple linear-in-cost model requiring an appropriate non-linear link function between utility and cost. The link function may...
Fast damping in mismatched high intensity beam transportation
Directory of Open Access Journals (Sweden)
V. Variale
2001-08-01
Full Text Available A very fast damping of beam envelope oscillation amplitudes was recently observed in simulations of high intensity beam transport, through periodic FODO cells, in mismatched conditions [V. Variale, Nuovo Cimento Soc. Ital. Fis. 112A, 1571–1582 (1999 and T. Clauser et al., in Proceedings of the Particle Accelerator Conference, New York, 1999 (IEEE, Piscataway, NJ, 1999, p. 1779]. A Landau damping mechanism was proposed at the origin of observed effect. In this paper, to further investigate the source of this fast damping, extensive simulations have been carried out. The results presented here support the interpretation of the mechanism at the origin of the fast damping as a Landau damping effect.
Techniques for the design of highly damped structures
International Nuclear Information System (INIS)
Nelson, F.C.
1975-01-01
This paper discusses several techniques for the design of highly damped structures, techniques which have proven successful for large scale, low frequency steel and concrete structures which are typical of nuclear power reactors and their components. The ability to augment structural damping can be useful in increasing the seismic withstandability of structures. Seismic excitation is broadband in its frequency content and will excite many strutural resonances. Broadband damping will limit these resonant responses and thereby reduce the seismic load on structures and their components. This paper discusses three techniques: the design of structural joints and interfaces to promote damping; the use of layers of viscoelastic material; and the employment of damping links. The emphasis is on explaining the ways in which these techniques work and in describing the ways in which they have been used. (Auth.)
Impact of Damping Uncertainty on SEA Model Response Variance
Schiller, Noah; Cabell, Randolph; Grosveld, Ferdinand
2010-01-01
Statistical Energy Analysis (SEA) is commonly used to predict high-frequency vibroacoustic levels. This statistical approach provides the mean response over an ensemble of random subsystems that share the same gross system properties such as density, size, and damping. Recently, techniques have been developed to predict the ensemble variance as well as the mean response. However these techniques do not account for uncertainties in the system properties. In the present paper uncertainty in the damping loss factor is propagated through SEA to obtain more realistic prediction bounds that account for both ensemble and damping variance. The analysis is performed on a floor-equipped cylindrical test article that resembles an aircraft fuselage. Realistic bounds on the damping loss factor are determined from measurements acquired on the sidewall of the test article. The analysis demonstrates that uncertainties in damping have the potential to significantly impact the mean and variance of the predicted response.
A new solvent suppression method via radiation damping effect
Cui, Xiao-Hong; Peng, Ling; Zhang, Zhen-Min; Cai, Shu-Hui; Chen, Zhong
2011-11-01
Radiation damping effects induced by the dominated solvent in a solution sample can be applied to suppress the solvent signal. The precession pathway and rate back to equilibrium state between solute and solvent spins are different under radiation damping. In this paper, a series of pulse sequences using radiation damping were designed for the solvent suppression in nuclear magnetic resonance (NMR) spectroscopy. Compared to the WATERGATE method, the solute signals adjacent to the solvent would not be influenced by using the radiation damping method. The one-dimensional (1D) 1H NMR, two-dimensional (2D) gCOSY, and J-resolved experimental results show the practicability of solvent suppression via radiation damping effects in 1D and 2D NMR spectroscopy.
Magnetic Damping of Solid Solution Semiconductor Alloys
Szofran, Frank R.; Benz, K. W.; Croell, Arne; Dold, Peter; Cobb, Sharon D.; Volz, Martin P.; Motakef, Shariar
1999-01-01
The objective of this study is to: (1) experimentally test the validity of the modeling predictions applicable to the magnetic damping of convective flows in electrically conductive melts as this applies to the bulk growth of solid solution semiconducting materials; and (2) assess the effectiveness of steady magnetic fields in reducing the fluid flows occurring in these materials during processing. To achieve the objectives of this investigation, we are carrying out a comprehensive program in the Bridgman and floating-zone configurations using the solid solution alloy system Ge-Si. This alloy system has been studied extensively in environments that have not simultaneously included both low gravity and an applied magnetic field. Also, all compositions have a high electrical conductivity, and the materials parameters permit reasonable growth rates. An important supporting investigation is determining the role, if any, that thermoelectromagnetic convection (TEMC) plays during growth of these materials in a magnetic field. TEMC has significant implications for the deployment of a Magnetic Damping Furnace in space. This effect will be especially important in solid solutions where the growth interface is, in general, neither isothermal nor isoconcentrational. It could be important in single melting point materials, also, if faceting takes place producing a non-isothermal interface. In conclusion, magnetic fields up to 5 Tesla are sufficient to eliminate time-dependent convection in silicon floating zones and possibly Bridgman growth of Ge-Si alloys. In both cases, steady convection appears to be more significant for mass transport than diffusion, even at 5 Tesla in the geometries used here. These results are corroborated in both growth configurations by calculations.
Prognostic and predictive value of DAMPs and DAMP-associated processes in cancer
Directory of Open Access Journals (Sweden)
Jitka eFucikova
2015-08-01
Full Text Available It is now clear that human neoplasms form, progress and respond to therapy in the context of an intimate crosstalk with the host immune system. In particular, accumulating evidence demonstrates that the efficacy of most, if not all, chemo- and radiotherapeutic agents commonly employed in the clinic critically depends on the (reactivation of tumor-targeting immune response. One of the mechanisms whereby conventional chemotherapeutics, targeted anticancer agents and radiotherapy can provoke a therapeutically relevant, adaptive immune response against malignant cells is commonly known as „immunogenic cell death (ICD. Importantly, dying cancer cells are perceived as immunogenic only when they emit a set of immunostimulatory signals upon the activation of intracellular stress response pathways. The emission of these signals, which are generally referred to as „damage-associated molecular patterns (DAMPs, may therefore predict whether patients will respond to chemotherapy or not, at least in some settings. Here, we review clinical data indicating that DAMPs and DAMP-associated stress responses might have prognostic or predictive value for cancer patients.
Spontaneous electromagnetic emission from a strongly localized plasma flow.
Tejero, E M; Amatucci, W E; Ganguli, G; Cothran, C D; Crabtree, C; Thomas, E
2011-05-06
Laboratory observations of electromagnetic ion-cyclotron waves generated by a localized transverse dc electric field are reported. Experiments indicate that these waves result from a strong E×B flow inhomogeneity in a mildly collisional plasma with subcritical magnetic field-aligned current. The wave amplitude scales with the magnitude of the applied radial dc electric field. The electromagnetic signatures become stronger with increasing plasma β, and the radial extent of the power is larger than that of the electrostatic counterpart. Near-Earth space weather implications of the results are discussed.
Cancellation of collisional frequency shifts in optical lattice clocks with Rabi spectroscopy
Lee, Sangkyung; Park, Chang Yong; Lee, Won-Kyu; Yu, Dai-Hyuk
2016-03-01
We analyze both the s- and p-wave collision induced frequency shifts and propose an over-π pulse scheme to cancel the shifts in optical lattice clocks interrogated by a Rabi pulse. The collisional frequency shifts are analytically solved as a function of the pulse area and the inhomogeneity of the Rabi frequencies. Experimentally measured collisional frequency shifts in an Yb optical lattice clock are in good agreement with the analytical calculations. Based on our analysis, the over-π pulse combined with a small inhomogeneity below 0.1 allows a fractional uncertainty on a level of 10-18 in both Sr and Yb optical lattice clocks by canceling the collisional frequency shift.
Cancellation of collisional frequency shifts in optical lattice clocks with Rabi spectroscopy
International Nuclear Information System (INIS)
Lee, Sangkyung; Park, Chang Yong; Lee, Won-Kyu; Yu, Dai-Hyuk
2016-01-01
We analyze both the s- and p-wave collision induced frequency shifts and propose an over-π pulse scheme to cancel the shifts in optical lattice clocks interrogated by a Rabi pulse. The collisional frequency shifts are analytically solved as a function of the pulse area and the inhomogeneity of the Rabi frequencies. Experimentally measured collisional frequency shifts in an Yb optical lattice clock are in good agreement with the analytical calculations. Based on our analysis, the over-π pulse combined with a small inhomogeneity below 0.1 allows a fractional uncertainty on a level of 10 −18 in both Sr and Yb optical lattice clocks by canceling the collisional frequency shift. (paper)
Spectrum of absorption of a weak signal by an atom in a strong field
International Nuclear Information System (INIS)
Bakaev, D.S.; Vdovin, Y.A.; Ermachenko, V.M.; Yakovlenko, S.I.
1985-01-01
An analysis is made of the spectrum of absorption of a weak probe electromagnetic field by two-level atoms in a strong resonant laser field, undergoing collision with buffer gas atoms. The analysis is made using an approach that allows for the direct influence of a strong electromagnetic field on the dynamics of an elastic collision between an active atom and a buffer gas atom. Rate equations are analyzed for a combined ''atom--strong electromagnetic field'' system (an atom ''dressed'' by the field) allowing for spontaneous and optical collisional transitions, and also for the interaction with the probe field. In the steady-state case, an expression is derived for the electric susceptibility of the medium at the small-signal frequency. This expression contains the rates of the optical collisional transitions that depend nontrivially on the parameters of the strong electromagnetic field. The phenomenological characteristics of optical collisional transitions generally used are only valid at low intensities and for small frequency detunings of the strong electromagnetic field, i.e., in the impact limit
Es'kin, V. A.; Ivoninsky, A. V.; Kudrin, A. V.
2018-02-01
Surface plasmon resonances arising in the course of scattering of an H-polarized plane electromagnetic wave by an axially magnetized plasma column are analyzed. Main attention is paid to the behavior of these resonances in the presence of collisional loss in the magnetoplasma filling the scatterer. The frequencies, Q factors, and amplitude coefficients of the electromagnetic field of multipole surface plasmon resonances of different orders are found, and conditions under which the collisional loss in the plasma completely suppresses a given resonance are determined.
Perceptual studies of violin body damping and vibrato.
Fritz, Claudia; Woodhouse, Jim; Cheng, Felicia P-H; Cross, Ian; Blackwell, Alan F; Moore, Brian C J
2010-01-01
This work explored how the perception of violin notes is influenced by the magnitude of the applied vibrato and by the level of damping of the violin resonance modes. Damping influences the "peakiness" of the frequency response, and vibrato interacts with this peakiness by producing fluctuations in spectral content as well as in frequency and amplitude. Initially, it was shown that thresholds for detecting a change in vibrato amplitude were independent of body damping, and thresholds for detecting a change in body damping were independent of vibrato amplitude. A study of perceptual similarity using triadic comparison showed that vibrato amplitude and damping were largely perceived as independent dimensions. A series of listening tests was conducted employing synthesized, recorded, or live performance to probe perceptual responses in terms of "liveliness" and preference. The results do not support the conclusion that liveliness results from the combination of the use of vibrato and a "peaky" violin response. Judgments based on listening to single notes showed inconsistent patterns for liveliness, while preferences were highest for damping that was slightly less than for a reference (real) violin. In contrast, judgments by players based on many notes showed preference for damping close to the reference value.
SPATIAL DAMPING OF PROPAGATING KINK WAVES IN PROMINENCE THREADS
International Nuclear Information System (INIS)
Soler, R.; Oliver, R.; Ballester, J. L.
2011-01-01
Transverse oscillations and propagating waves are frequently observed in threads of solar prominences/filaments and have been interpreted as kink magnetohydrodynamic (MHD) modes. We investigate the spatial damping of propagating kink MHD waves in transversely nonuniform and partially ionized prominence threads. Resonant absorption and ion-neutral collisions (Cowling's diffusion) are the damping mechanisms taken into account. The dispersion relation of resonant kink waves in a partially ionized magnetic flux tube is numerically solved by considering prominence conditions. Analytical expressions of the wavelength and damping length as functions of the kink mode frequency are obtained in the thin tube and thin boundary approximations. For typically reported periods of thread oscillations, resonant absorption is an efficient mechanism for the kink mode spatial damping, while ion-neutral collisions have a minor role. Cowling's diffusion dominates both the propagation and damping for periods much shorter than those observed. Resonant absorption may explain the observed spatial damping of kink waves in prominence threads. The transverse inhomogeneity length scale of the threads can be estimated by comparing the observed wavelengths and damping lengths with the theoretically predicted values. However, the ignorance of the form of the density profile in the transversely nonuniform layer introduces inaccuracies in the determination of the inhomogeneity length scale.
High damping Fe-Mn martensitic alloys for engineering applications
International Nuclear Information System (INIS)
Baik, S.-H.
2000-01-01
Conventional methods for reducing vibration in engineering designs (i.e. by stiffening or detuning) may be undesirable or inadequate in conditions where size or weight must be minimized or where complex vibration spectra exist. Alloys which combine high damping capacity with good mechanical properties can provide attractive technical and economic solutions to problems involving seismic, shock and vibration isolation. To meet these trends, we have developed a new high damping Fe-17%Mn alloy. Also, the alloy has advantages of good mechanical properties and is more economical than any other known damping alloys (a quarter the cost of non-ferrous damping alloy). Thus, the high damping Fe-17%Mn alloy can be widely applied to household appliances, automobiles, industrial facilities and power plant components with its excellent damping capacity (SDC, 30%) and mechanical property (T.S. 700 MPa). It is the purpose of this paper to introduce the characterization of the high damping Fe-17%Mn alloy and the results of retrofit of several such applications. (orig.)
Public health and economic impact of dampness and mold
Energy Technology Data Exchange (ETDEWEB)
Mudarri, David; Fisk, William J.
2007-06-01
The public health risk and economic impact of dampness and mold exposures was assessed using current asthma as a health endpoint. Individual risk of current asthma from exposure to dampness and mold in homes from Fisk et al. (2007), and asthma risks calculated from additional studies that reported the prevalence of dampness and mold in homes were used to estimate the proportion of U.S. current asthma cases that are attributable to dampness and mold exposure at 21% (95% confidence internal 12-29%). An examination of the literature covering dampness and mold in schools, offices, and institutional buildings, which is summarized in the appendix, suggests that risks from exposure in these buildings are similar to risks from exposures in homes. Of the 21.8 million people reported to have asthma in the U.S., approximately 4.6 (2.7-6.3) million cases are estimated to be attributable to dampness and mold exposure in the home. Estimates of the national cost of asthma from two prior studies were updated to 2004 and used to estimate the economic impact of dampness and mold exposures. By applying the attributable fraction to the updated national annual cost of asthma, the national annual cost of asthma that is attributable to dampness and mold exposure in the home is estimated to be $3.5 billion ($2.1-4.8 billion). Analysis indicates that exposure to dampness and mold in buildings poses significant public health and economic risks in the U.S. These findings are compatible with public policies and programs that help control moisture and mold in buildings.
Key Role of DAMP in Inflammation, Cancer, and Tissue Repair.
Pandolfi, Franco; Altamura, Simona; Frosali, Simona; Conti, Pio
2016-05-01
This review aimed to take stock of the current status of research on damage-associated molecular pattern (DAMP) protein. We discuss the Janus-faced role of DAMP molecules in inflammation, cancer, and tissue repair. The high-mobility group box (HMGB)-1 and adenosine triphosphate proteins are well-known DAMP molecules and have been primarily associated with inflammation. However, as we shall see, recent data have linked these molecules to tissue repair. HMGB1 is associated with cancer-related inflammation. It activates nuclear factor kB, which is involved in cancer regulation via its receptor for advanced glycation end-products (RAGE), Toll-like receptors 2 and 4. Proinflammatory activity and tissue repair may lead to pharmacologic intervention, by blocking DAMP RAGE and Toll like receptor 2 and 4 role in inflammation and by increasing their concentration in tissue repair, respectively. We conducted a MEDLINE search for articles pertaining to the various issues related to DAMP, and we discuss the most relevant articles especially (ie, not only those published in journals with a higher impact factor). A cluster of remarkable articles on DAMP have appeared in the literature in recent years. Regarding inflammation, several strategies have been proposed to target HMGB1, from antibodies to recombinant box A, which interacts with RAGE, competing with the full molecule. In tissue repair, it was reported that the overexpression of HMGB1 or the administration of exogenous HMGB1 significantly increased the number of vessels and promoted recovery in skin-wound, ischemic injury. Due to the bivalent nature of DAMP, it is often difficult to explain the relative role of DAMP in inflammation versus its role in tissue repair. However, this point is crucial as DAMP-related treatments move into clinical practice. Copyright © 2016 Elsevier HS Journals, Inc. All rights reserved.
Experimental validation of solid rocket motor damping models
Riso, Cristina; Fransen, Sebastiaan; Mastroddi, Franco; Coppotelli, Giuliano; Trequattrini, Francesco; De Vivo, Alessio
2017-12-01
In design and certification of spacecraft, payload/launcher coupled load analyses are performed to simulate the satellite dynamic environment. To obtain accurate predictions, the system damping properties must be properly taken into account in the finite element model used for coupled load analysis. This is typically done using a structural damping characterization in the frequency domain, which is not applicable in the time domain. Therefore, the structural damping matrix of the system must be converted into an equivalent viscous damping matrix when a transient coupled load analysis is performed. This paper focuses on the validation of equivalent viscous damping methods for dynamically condensed finite element models via correlation with experimental data for a realistic structure representative of a slender launch vehicle with solid rocket motors. A second scope of the paper is to investigate how to conveniently choose a single combination of Young's modulus and structural damping coefficient—complex Young's modulus—to approximate the viscoelastic behavior of a solid propellant material in the frequency band of interest for coupled load analysis. A scaled-down test article inspired to the Z9-ignition Vega launcher configuration is designed, manufactured, and experimentally tested to obtain data for validation of the equivalent viscous damping methods. The Z9-like component of the test article is filled with a viscoelastic material representative of the Z9 solid propellant that is also preliminarily tested to investigate the dependency of the complex Young's modulus on the excitation frequency and provide data for the test article finite element model. Experimental results from seismic and shock tests performed on the test configuration are correlated with numerical results from frequency and time domain analyses carried out on its dynamically condensed finite element model to assess the applicability of different equivalent viscous damping methods to describe
Owen, Kyle
2013-05-01
Laser-based ammonia gas sensors have useful applications in many fields including combustion, atmospheric monitoring, and medical diagnostics. Calibration-free trace gas sensors require the spectroscopic parameters including linestrengths and collisional broadening coefficients to be known. Ammonia\\'s strong ν2 vibrational band between 9 - 12 μm has the high absorption strength needed for sensing small concentrations. Within this band, the 1103.46cm-1 feature is one of the strongest and has minimal interference from CO2 and H2O. However, the six rotational transitions that make up this feature have not been studied previously with absorption spectroscopy due to their small line spacing ranging from 0.004 to 0.029cm-1. A tunable quantum cascade laser was used to accurately study these six transitions. A retrieval program was used to determine the linestrengths and collisional broadening coefficients based on Voigt and Galatry profiles. The experiments were performed with ammonia mixtures in nitrogen, oxygen, water vapor, and carbon dioxide at room temperature in an optical cell. These data are going to aid in the development of quantitative ammonia sensors utilizing this strong absorption feature. © 2013 Elsevier Ltd.
Bunching for Shorter Damping Rings for the ILC
Neuffer, David V
2005-01-01
A variant rearrangement of the bunch trains for the ILC that enables much shorter damping rings is presented. In a particular example the ~2280 bunches are regrouped into ~450 subtrains of five adjacent bunches. These subtrains are extracted from the damping rings at ~2.2 ms intervals, obtaining the 1ms macrobunch length of the baseline TESLA collider scenario. If the baseline damping rf frequency is 325 MHz and the kicker rise and fall times are ~20 ns, a ring circumference of ~4.5km is required. Variations of the scheme could easily reduce the circumference to ~3km, and faster kickers could reduce it even further.
On small vibrations of a damped Stieltjes string
Directory of Open Access Journals (Sweden)
Olga Boyko
2015-01-01
Full Text Available Inverse problem of recovering masses, coefficients of damping and lengths of the intervals between the masses using two spectra of boundary value problems and the total length of the Stieltjes string (an elastic thread bearing point masses is considered. For the case of point-wise damping at the first counting from the right end mass the problem of recovering the masses, the damping coefficient and the lengths of the subintervals by one spectrum and the total length of the string is solved.
Damping and support in high-temperature superconducting levitation systems
Hull, John R [Sammamish, WA; McIver, Carl R [Everett, WA; Mittleider, John A [Kent, WA
2009-12-15
Methods and apparatuses to provide improved auxiliary damping for superconducting bearings in superconducting levitation systems are disclosed. In a superconducting bearing, a cryostat housing the superconductors is connected to a ground state with a combination of a damping strip of material, a set of linkage arms to provide vertical support, and spring washers to provide stiffness. Alternately, the superconducting bearing may be supported by a cryostat connected to a ground state by posts constructed from a mesh of fibers, with the damping and stiffness controlled by the fiber composition, size, and mesh geometry.
Damping in coupled bending and torsion - An experiment
Umland, Jeffrey W.; Inman, Daniel J.; Banks, H. T.
1991-01-01
Traditional experimental modal testing methods are used to determine the damping properties of a Euler-Bernoulli beam with offset inertial tip mass. Both viscous and strain rate damping models are considered in bending and in torsion. A partial differential equation model of the coupled system is used. Eigenfunctions are derived for the coupled system by using a Green's function approach to derive the approximate uncoupled eigenfunctions. These eigenfunctions are used in a decoupled fashion with experimental modal data to estimate the damping parameters of the coupled system. The experimental modal data were obtained from both free and impulse responses using a combined translational and rotational accelerometer.
Evaluation of Damping Using Frequency Domain Operational Modal Analysis Techniques
DEFF Research Database (Denmark)
Bajric, Anela; Georgakis, Christos T.; Brincker, Rune
2015-01-01
separated and closely spaced modes. Finally, the results of the numerical study are presented, in which the error of the structural damping estimates obtained by each OMA technique is shown for a range of damping levels. From this, it is clear that there are notable differences in accuracy between......Operational Modal Analysis (OMA) techniques provide in most cases reasonably accurate estimates of structural frequencies and mode shapes. In contrast though, they are known to often produce uncertain structural damping estimates, which is mainly due to inherent random and/or bias errors...
Travelling Solitons in the Damped Driven Nonlinear Schroedinger Equation
Barashenkov, I V
2003-01-01
The well-known effect of the linear damping on the moving nonlinear Schrodinger soliton (even when there is energy supply via the spatially homogeneous driving) is to quench its momentum to zero. Surprisingly, the zero momentum does not necessarily mean zero velocity. We show that two or more parametrically driven damped solitons can form a complex travelling with zero momentum at a nonzero constant speed. All travelling complexes we have found so far, turned out to be unstable. Thus, the parametric driving is capable of sustaining the uniform motion of damped solitons, but some additional agent is required to make this motion stable.
First high power tests of clic prototype accelerating structures with hom waveguide damping
Döbert, S; Riddone, G; Wuensch, W; Zennaro, R; Higo, T; Matsumoto, S; Yokoyama, K; Adolphsen, C; Wang, F; Wang, J
2010-01-01
Prototype accelerating structures for the Compact Linear Collider (CLIC) are being developed and high-power tested in collaboration between SLAC, KEK and CERN. Several undamped, low group-velocity and strongly tapered prototypes (of the so-called T18 design) have been operated above 100 MV/m average gradients at a very low breakdown rates. Recently two new structures with the same iris apertures but now including higher order mode damping waveguides in each cell (TD18 design) have been tested at SLAC and KEK. The damped versions could be processed to similar gradients but an increased breakdown rate was observed. The damping waveguides lead to a magnetic field enhancement in the outer diameter of the cells which results in increased pulsed surface heating. The maximum pulsed temperature rise is 80 deg at the design gradient of 100 MV/m compared to only 20 deg for the undamped version. The high-power tests of the two TD18 structures are analyzed with special emphasis to understand if the higher breakdown rate ...
Damping of short gravity-capillary waves due to oil derivatives film on the water surface
Sergievskaya, Irina; Ermakov, Stanislav; Lazareva, Tatyana
2016-10-01
In this paper new results of laboratory studies of damping of gravity-capillary waves on the water surface covered by kerosene are presented and compared with our previous analysis of characteristics of crude oil and diesel fuel films. Investigations of kerosene films were carried out in a wide range values of film thicknesses (from some hundreds millimetres to a few millimetres) and in a wide range of surface wave frequencies (from 10 to 27 Hz). The selected frequency range corresponds to the operating wavelengths of microwave, X- to Ka-band radars typically used for the ocean remote sensing. The studied range of film thickness covers typical thicknesses of routine spills in the ocean. It is obtained that characteristics of waves, measured in the presence of oil derivatives films differ from those for crude oil films, in particular, because the volume viscosity of oil derivatives and crude oil is strongly different. To retrieve parameters of kerosene films from the experimental data the surface wave damping was analyzed theoretically in the frame of a model of two-layer fluid. The films are assumed to be soluble, so the elasticity on the upper and lower boundaries is considered as a function of wave frequency. Physical parameters of oil derivative films were estimated when tuning the film parameters to fit theory and experiment. Comparison between wave damping due to crude oil, kerosene and diesel fuel films have shown some capabilities of distinguishing of oil films from remote sensing of short surface waves.
Directory of Open Access Journals (Sweden)
Saeed Soleymani
2016-01-01
Full Text Available This paper Analytically investigates the effects of system and controller parameters and operating conditions on the dynamic and transient behavior of wind turbines (WTs with doubly-fed induction generators (DFIGs under voltage dips and wind speed fluctuations. Also, it deals with the design considerations regarding rotor and speed controllers. The poorly damped electrical and mechanical modes of the system are identified, and the effects of system parameters, and speed/rotor controllers on these modes are investigated by modal and sensitivity analyses. The results of theoretical studies are verified by time domain simulations. It is found that the dynamic behavior of the DFIG-based WT under voltage dips is strongly affected by the stator dynamics. Further, it is shown that the closed loop bandwidth of the rotor current control, rotor current damping, DFIG power factor and the rotor back-emf voltages have high impact on the stator modes and consequently on the DFIG dynamic behavior. Moreover, it is shown that the dynamic behavior of DFIG-based WT under wind speed fluctuation is significantly dependent on the bandwidth and damping of speed control loop.
The DAMPE experiment: 2 year in orbit
Gargano, Fabio; DAMPE Collaboration
2017-12-01
The DArk Matter Particle Explorer (DAMPE) is a space mission within the strategic framework of the Chinese Academy of Sciences, resulting from a collaboration of Chinese, Italian, and Swiss institutions, and is a new addition to the growing number of particle detectors in space. It was successfully launched in December 2015 and has commenced nominal science operations since shortly after launch. Lending technologies from its predecessors such as AMS and Fermi-LAT, it features a powerful segmented electromagnetic calorimeter which thanks to its 31 radiation lengths enables the study of charged cosmic rays in the energy domain of up to 100 TeV and gamma rays of up to 10 TeV. The calorimeter is complemented with a silicon-tungsten tracker converter which yields a comparable angular resolution as current space-borne pair-conversion gamma-ray detectors. In addition, the detector features a top anti-coincidence shield made of segmented silicon plastic scintillators and a boron-doped plastic scintillator on the bottom of the instrument to detect delayed neutrons arising from cosmic ray protons showering in the calorimeter. An overview of the mission and a summary of the latest results in the domain of charged cosmic rays, gamma rays and heavy ions will be presented.
Effective mass and damping of submerged structures
Energy Technology Data Exchange (ETDEWEB)
Dong, R.G.
1978-04-01
Various structures important for safety in nuclear power plants must remain functioning in the event of an earthquake or other dynamic phenomenon. Some of these important structures, such as spent-fuel storage racks, main pressure-relief valve lines, and internal structures in the reactor vessel, are submerged in water. Dynamic analysis must include the force and damping effects of water. This report provides a technical basis for evaluating the wide variety of modeling assumptions currently used in design analysis. Current design analysis techniques and information in the literature form the basis of our conclusions and recommendations. We surveyed 32 industrial firms and reviewed 49 technical references. We compare various theories with published experimental results wherever possible. Our findings generally pertain to idealized structures, such as single isolated members, arrays of members, and coaxial cylinders. We relate these findings to the actual reactor structures through observations and recommendations. Whenever possible we recommend a definite way to evaluate the effect of hydrodynamic forces on these structures.
Coherent Instabilities of ILC Damping Ring
Energy Technology Data Exchange (ETDEWEB)
Heifets, S.; Stupakov, G.; Bane, K.; /SLAC
2006-09-27
The paper presents the first attempt to estimates the ILC damping ring impedance and compare thresholds of the classical instabilities for several designs initially proposed for the DR. The work was carried out in the spring of 2006. Since then the choice of the DR is narrowed. Nevertheless, the analysis described may be useful for the next iterations of the beam stability. Overall, the conventional instabilities will have little impact on the ring performance provided the careful design of the ring minimizes the impedance below acceptable level indicated above. The only exception is the transverse CB instability. The longitudinal CB is less demanding. However, even the transverse CB instability would have threshold current above nominal provided the aperture in the wigglers is increased from 8 mm to 16 mm. The microwave instability needs more studies. Nevertheless, we should remember that the ILC DR is different from existing high-current machines at least in two respects: absence of the beam-beam tune spread stabilizing beams in colliders, and unusual strict requirements for low emittance. That may cause new problems such as bunch emittance dilution due to high-frequency wakes (BPMs, grooves), etc. Even if such a possibility exists, it probably universal for all machines and ought be addressed in the design of vacuum components rather than have effect on the choice of the machine design.
Seismic Analysis of a Viscoelastic Damping Isolator
Directory of Open Access Journals (Sweden)
Bo-Wun Huang
2015-01-01
Full Text Available Seismic prevention issues are discussed much more seriously around the world after Fukushima earthquake, Japan, April 2011, especially for those countries which are near the earthquake zone. Approximately 1.8×1012 kilograms of explosive energy will be released from a magnitude 9 earthquake. It destroys most of the unprotected infrastructure within several tens of miles in diameter from the epicenter. People can feel the earthquake even if living hundreds of miles away. This study is a seismic simulation analysis for an innovated and improved design of viscoelastic damping isolator, which can be more effectively applied to earthquake prevention and damage reduction of high-rise buildings, roads, bridges, power generation facilities, and so forth, from earthquake disaster. Solidworks graphic software is used to draw the 3D geometric model of the viscoelastic isolator. The dynamic behavior of the viscoelastic isolator through shock impact of specific earthquake loading, recorded by a seismometer, is obtained via ANSYS finite element package. The amplitude of the isolator is quickly reduced by the viscoelastic material in the device and is shown in a time response diagram. The result of this analysis can be a crucial reference when improving the design of a seismic isolator.
Discontinuities in a damped quantum harmonic oscillator
International Nuclear Information System (INIS)
Giraldi, Filippo; Petruccione, Francesco
2012-01-01
The quantum model for a damped harmonic oscillator linearly coupled to a reservoir of continuous frequency modes has been exactly diagonalized either with or without the rotating wave approximation. The exact dynamics, formally described in terms of the coupling function, is analyzed for the Drude model. In this scenario, we focus on a class of couplings recovering the Drude form as a limiting case. The exact time evolution of the expectation values of the position, momentum and number operators are described through Fox H-functions, as well as the correlation function of the reservoir. In correspondence with the critical values of the frequency, discontinuities appear in the long time scale dynamics, arbitrarily slowing down the relaxations of the above observables. This effect allows one to enhance arbitrarily the lifetime of the excitations, giving relevant applications in the study of the quantum domain of opto-mechanical and nano-mechanical resonators. The critical frequency approach constitutes a further method of control in the scenario of environment-induced decoherence via reservoir engineering. (paper)
Effective mass and damping of submerged structures
International Nuclear Information System (INIS)
Dong, R.G.
1978-01-01
Various structures important for safety in nuclear power plants must remain functioning in the event of an earthquake or other dynamic phenomenon. Some of these important structures, such as spent-fuel storage racks, main pressure-relief valve lines, and internal structures in the reactor vessel, are submerged in water. Dynamic analysis must include the force and damping effects of water. This report provides a technical basis for evaluating the wide variety of modeling assumptions currently used in design analysis. Current design analysis techniques and information in the literature form the basis of our conclusions and recommendations. We surveyed 32 industrial firms and reviewed 49 technical references. We compare various theories with published experimental results wherever possible. Our findings generally pertain to idealized structures, such as single isolated members, arrays of members, and coaxial cylinders. We relate these findings to the actual reactor structures through observations and recommendations. Whenever possible we recommend a definite way to evaluate the effect of hydrodynamic forces on these structures
Study on global performances and mooring-induced damping of a semi-submersible
Xiong, Ling-zhi; Yang, Jian-min; Lv, Hai-ning; Zhao, Wen-hua; Kou, Yu-feng
2016-10-01
The harsh environmental conditions bring strong nonlinearities to the hydrodynamic performances of the offshore floating platforms, which challenge the reliable prediction of the platform coupled with the mooring system. The present study investigates a typical semi-submersible under both the operational and the survival conditions through numerical and experimental methods. The motion responses, the mooring line tensions, and the wave loads on the longitudinal mid-section are investigated by both the fully non-linearly coupled numerical simulation and the physical experiment. Particularly, in the physical model test, the wave loads distributed on the semi-submersible's mid-section were measured by dividing the model into two parts, namely the port and the starboard parts, which were rigidly connected by three six-component force transducers. It is concluded that both the numerical and physical model can have good prediction of the semi-submersible's global responses. In addition, an improved numerical approach is proposed for the estimation of the mooring-induced damping, and is validated by both the experimental and the published results. The characteristics of the mooring-induced damping are further summarized in various sea states, including the operational and the survival environments. In order to obtain the better prediction of the system response in deep water, the mooring-induced damping of the truncated mooring lines applied in the physical experiment are compensated by comparing with those in full length. Furthermore, the upstream taut and the downstream slack mooring lines are classified and investigated to obtain the different mooring line damping performances in the comparative study.
Account of states with indefinite spin in calculations of intercombination collisional transitions
International Nuclear Information System (INIS)
Gordeev, S.V.; Chirtsov, A.S.
1986-01-01
States with indefinite spin are used in the second order of the perturbation theory as intermediate states for calculating electronic collisional transitions with changing spin between excited states of atoms. The rate coefficient for 4 1 P-4 3 D transition in helium is estimated
Characterization of collisionally pumped optical-field-ionization soft X-ray lasers
Czech Academy of Sciences Publication Activity Database
Mocek, Tomáš; Sebban, S.; Bettaibi, I.; Upcraft, L. M.; Balcou, P.; Breger, P.; Zeitoun, P.; Le Pape, S.; Ros, D.; Klisnick, A.; Carillon, A.; Jamelot, G.; Rus, Bedřich; Wyart, J. F.
2004-01-01
Roč. 78, - (2004), s. 939-944 ISSN 0946-2171 Grant - others:HPRI(XE) 199900086 Institutional research plan: CEZ:AV0Z1010921 Keywords : X-ray lasers * optical-field-ionization * collisional excitation Subject RIV: BH - Optics, Masers, Lasers Impact factor: 2.215, year: 2004
Dusty Plasma Modeling of the Fusion Reactor Sheath Including Collisional-Radiative Effects
International Nuclear Information System (INIS)
Dezairi, Aouatif; Samir, Mhamed; Eddahby, Mohamed; Saifaoui, Dennoun; Katsonis, Konstantinos; Berenguer, Chloe
2008-01-01
The structure and the behavior of the sheath in Tokamak collisional plasmas has been studied. The sheath is modeled taking into account the presence of the dust 2 and the effects of the charged particle collisions and radiative processes. The latter may allow for optical diagnostics of the plasma.
Exact random walk definition of the collisional-radiative ionization and recombination coefficients
Kastner, S. O.
1981-01-01
The collisional-radiative ionization and recombination coefficients are shown to be expressible in terms of the 'total probability', from initial level i to final level j, which excludes intermediate returns to the initial level. Applications are made to three-level and four-level systems to illustrate the method of calculation and compare with an approximation currently used.
Energy Technology Data Exchange (ETDEWEB)
Nishi-Kawa, K.I.
1978-12-01
Collisional drift eigenmode, coupled to shear Alfven mode, is studied numerically in a current-carrying slab with finite magnetic shear. It is shown that, due to finite-beta effects, in the presence of current, a drift mode becomes unstable.
International Nuclear Information System (INIS)
Baravian, G.; Bretagne, J.; Godart, J.; Sultan, G.
1975-01-01
The collisional recombination, in the afterglow of a dense plasma, is regarded as a source process for an overpopulation of the high energy tail of the electron velocity distribution function. The perturbation of the distribution function leads to an important enhancement of the fluctuations of the electrostatic field in a narrow range near the plasma frequency ωsub(p). (orig.) [de
Revision of Collisional-Radiative Models and Neutral-Transport Code for Hydrogen and Helium Species
International Nuclear Information System (INIS)
Sawada, Keiji; Goto, Motoshi
2013-01-01
We have been developing collisional-radiative models and a neutral-transport code for hydrogen and helium species, which are used to investigate fusion plasmas. Collisional-radiative models of atomic hydrogen and helium have been applied to a helium-hydrogen RF plasma at Shinshu University, Japan, to test whether these models reproduce the observed emission intensities. The electron temperature and density are determined from visible emission line intensities of helium atom considering photoexcitation from the ground state to singlet P states, which is accompanied by radiation trapping. From the observed hydrogen Balmer γ line intensity, which is hardly affected by photoexcitation, the atomic hydrogen density is determined using a hydrogen collisional-radiative model that ignores photoexcitation. The atomic hydrogen temperature, which reproduces Balmer α and β line intensities, is determined using an iterative hydrogen atom collisional-radiative model that calculates photoexcitation rates. R-Matrix cross sections for n≤5 are used in the model. The hope is hoped that precise cross sections for higher-lying levels will be produced to determine the atomic density in fusion plasmas
The stability of weakly collisional plasmas with thermal and composition gradients
DEFF Research Database (Denmark)
Pessah, M.E.; Chakraborty, S.
2013-01-01
approximation if heavy elements are able to sediment in the inner region of the galaxy cluster. Motivated by the need to obtain a more complete picture of the dynamical properties of the ICM, we analyze the stability of a weakly collisional, magnetized plane-parallel atmosphere which is stratified in both...
Investigation of collisional effects within the bending magnet region of a DIII-D neutral beamline
Energy Technology Data Exchange (ETDEWEB)
Kessler, D.N.; Hong, R.; Kellman, D.H.
1993-10-01
The region between the pole faces of the DIII-D neutral beamline residual ion bending magnets is an area of transient high gas pressure which may cause beam defocusing and increased heating of beamline internal components due to collisional effects. An investigation of these effects helps in understanding residual ion trajectories and in providing information for studying in the beamline capability for operation with increased pulse duration. Examination of collisional effects, and of the possible existence of space charge blow-up, was carried out by injecting deuterium gas into the region between the magnet pole faces with rates varying from 0 to 18 torr-{ell}/sec. Thermocouple and waterflow calorimetry data were taken to measure the beamline component heating and beam powder deposition on the magnet pole shields, magnet louvers, ion dump, beam collimators, and calorimeter. Data was also taken at gas flow rates varying from 0 to 25 torr-{ell}/sec into the neutralizer cell and is compared with the magnet region gas injection data obtained. Results show that both collisional effects and space charge blow-up play a role in magnet region component heating and that neutralizer gas flow sufficiently reduces component heating without incurring unacceptable power losses through collisional effects.
Dependence of intermittent density fluctuations on collisionality in TJ-K
Energy Technology Data Exchange (ETDEWEB)
Reuther, Kyle; Garland, Stephen; Ramisch, Mirko [Institut fuer Grenzflaechenverfahrenstechnikund Plasmatechnologie, Universitaet Stuttgart (Germany); Manz, Peter [Physik-Department E28, Technische Universitaet Muenchen, Garching (Germany)
2016-07-01
Particle and heat transport losses due to edge turbulence are well known phenomena commonly seen in toroidal magnetic confinement devices. Furthermore in the scrape-off layer (SOL), turbulent density fluctuations are often observed to be intermittent and dominate particle transport to the vessel walls. In the adiabatic limit (small collisionality), of the two-field Hasegawa-Wakatani model, simulated turbulent density fluctuations are observed to couple to potential fluctuations and exhibit Gaussian behavior. However, in the hydrodynamic limit (large collisionality) the density and potential decouple. As a result, the density becomes passively advected, evolves towards the vorticity, and exhibits intermittent behavior. The relationship between collisionality and intermittency is investigated experimentally at the stellarator TJ-K. To vary the plasma collisionality, which is related to electron density and temperature, parameters such as gas type, neutral gas pressure, magnetic field, and heating power are varied. Radial profiles of plasma density, temperature, floating potential, and vorticity are recorded via a scanning 7-tip Langmuir probe array. First results are presented.
An Active Damping at Blade Resonances Using Piezoelectric Transducers
Choi, Benjamin; Morrison, Carlos; Duffy, Kirsten
2008-01-01
The NASA Glenn Research Center (GRC) is developing an active damping at blade resonances using piezoelectric structure to reduce excessive vibratory stresses that lead to high cycle fatigue (HCF) failures in aircraft engine turbomachinery. Conventional passive damping work was shown first on a nonrotating beam made by Ti-6A1-4V with a pair of identical piezoelectric patches, and then active feedback control law was derived in terms of inductor, resister, and capacitor to control resonant frequency only. Passive electronic circuit components and adaptive feature could be easily programmable into control algorithm. Experimental active damping was demonstrated on two test specimens achieving significant damping on tip displacement and patch location. Also a multimode control technique was shown to control several modes.
Mooring line damping estimation for a floating wind turbine.
Qiao, Dongsheng; Ou, Jinping
2014-01-01
The dynamic responses of mooring line serve important functions in the station keeping of a floating wind turbine (FWT). Mooring line damping significantly influences the global motions of a FWT. This study investigates the estimation of mooring line damping on the basis of the National Renewable Energy Laboratory 5 MW offshore wind turbine model that is mounted on the ITI Energy barge. A numerical estimation method is derived from the energy absorption of a mooring line resulting from FWT motion. The method is validated by performing a 1/80 scale model test. Different parameter changes are analyzed for mooring line damping induced by horizontal and vertical motions. These parameters include excitation amplitude, excitation period, and drag coefficient. Results suggest that mooring line damping must be carefully considered in the FWT design.
Breathing pulses in the damped-soliton model for nerves
Fongang Achu, G.; Moukam Kakmeni, F. M.; Dikande, A. M.
2018-01-01
Unlike the Hodgkin-Huxley picture in which the nerve impulse results from ion exchanges across the cell membrane through ion-gate channels, in the so-called soliton model the impulse is seen as an electromechanical process related to thermodynamical phenomena accompanying the generation of the action potential. In this work, account is taken of the effects of damping on the nerve impulse propagation, within the framework of the soliton model. Applying the reductive perturbation expansion on the resulting KdV-Burgers equation, a damped nonlinear Schrödinger equation is derived and shown to admit breathing-type solitary wave solutions. Under specific constraints, these breathing pulse solitons become self-trapped structures in which the damping is balanced by nonlinearity such that the pulse amplitude remains unchanged even in the presence of damping.
Nonlinear time heteronymous damping in nonlinear parametric planetary systems
Czech Academy of Sciences Publication Activity Database
Hortel, Milan; Škuderová, Alena
2014-01-01
Roč. 225, č. 7 (2014), s. 2059-2073 ISSN 0001-5970 Institutional support: RVO:61388998 Keywords : nonlinear dynamics * planetary systems * heteronymous damping Subject RIV: JT - Propulsion, Motors ; Fuels Impact factor: 1.465, year: 2014
Frequency Dependence of Damping and Compliance in Loudspeaker Suspensions
DEFF Research Database (Denmark)
Thorborg, Knud; Tinggaard, Carsten; Agerkvist, Finn T.
2010-01-01
]. It is an empirical model mathematically describing the effects of visco-elasticity in loudspeaker suspensions. The evaluation is to a high degree based on test loudspeakers with rubber surrounds with a high content of plasticizer combining high compliance and high damping. This is very effective to reduce rim...... resonances, but less used in high quality loudspeakers today – where “Low Loss Rubber Surround” is currently seen as a marketing feature, as it is expected to have positive impact on sound quality. The plasticized type of surround shows significant creep, followed by compliance and damping increasing towards...... - with the additives normally used to adjust stiffness and damping - neither frequency dependency of compliance nor creep are significant problems. Despite this, experience shows that frequency dependent mechanical damping nevertheless might be present. In this paper some modifications to the LOG-model are proposed...
Highly Damping Hard Coatings for Protection of Titanium Blades
National Research Council Canada - National Science Library
Movchan, Boris A; Ustinov, Anatolii I
2005-01-01
Sn-Cr-MgO system is used as an example to show the basic capability to produce by EBPVD protective metal-ceramic coatings with a high adhesion strength, high values of hardness and damping capacity...
Nonlinear damped Schrodinger equation in two space dimensions
Directory of Open Access Journals (Sweden)
Tarek Saanouni
2015-04-01
Full Text Available In this article, we study the initial value problem for a semi-linear damped Schrodinger equation with exponential growth nonlinearity in two space dimensions. We show global well-posedness and exponential decay.
Projectile Motion with Quadratic Damping in a Constant ...
Indian Academy of Sciences (India)
Home; Journals; Resonance – Journal of Science Education; Volume 19; Issue 5. Projectile Motion with Quadratic Damping in a Constant Gravitational Field. Chandra Das Dhiranjan Roy. General Article Volume 19 Issue 5 May 2014 pp 446-465 ...
The Use of Complex Stiffnesses for Hysteretic Damping
National Research Council Canada - National Science Library
Korjack, T
1998-01-01
This technical treatise has exemplified a response spectrum method that is particularly suited for spring-mass-damping systems excited by one or more base or ground disturbances characterized by displacements...
Requirements for longitudinal HOM damping in superconducting recirculating linacs
International Nuclear Information System (INIS)
Bisognano, J.J.; Fripp, M.L.
1989-01-01
Transverse beam breakup provides the primary current limitation in the operation of superconducting recirculating linacs and requires the significant damping of transverse-deflecting higher order modes. The need to damp the coexisting longitudinal HOMs in these nominally isochronous machines, however, is not as clear. Isochronicity implies that energy variations induced by excitation of longitudinal modes do not translate directly into position and current modulations. Such modulations, if present, could enhance the initial excitation, effectively closing a potentially unstable feedback loop. Design optimization of cavity structures may suggest that no longitudinal damping be provided. On the other hand, easing of the isochronicity requirement may provide desired flexibility in lattice design. In this note, limits are placed on the requirements for longitudinal HOM damping and on the tolerances for isochronicity which are driven by possible longitudinal multipass phenomena. 2 refs., 1 fig
Mooring Line Damping Estimation for a Floating Wind Turbine
Directory of Open Access Journals (Sweden)
Dongsheng Qiao
2014-01-01
Full Text Available The dynamic responses of mooring line serve important functions in the station keeping of a floating wind turbine (FWT. Mooring line damping significantly influences the global motions of a FWT. This study investigates the estimation of mooring line damping on the basis of the National Renewable Energy Laboratory 5 MW offshore wind turbine model that is mounted on the ITI Energy barge. A numerical estimation method is derived from the energy absorption of a mooring line resulting from FWT motion. The method is validated by performing a 1/80 scale model test. Different parameter changes are analyzed for mooring line damping induced by horizontal and vertical motions. These parameters include excitation amplitude, excitation period, and drag coefficient. Results suggest that mooring line damping must be carefully considered in the FWT design.
Damping of Torsional Beam Vibrations by Control of Warping Displacement
DEFF Research Database (Denmark)
Høgsberg, Jan Becker; Hoffmeyer, David; Ejlersen, Christian
2016-01-01
Supplemental damping of torsional beam vibrations is considered by viscous bimoments acting on the axial warping displacement at the beam supports. The concept is illustrated by solving the governing eigenvalue problem for various support configurations with the applied bimoments represented...
Extracting Damping Ratio from Dynamic Data and Numerical Solutions
Casiano, M. J.
2016-01-01
There are many ways to extract damping parameters from data or models. This Technical Memorandum provides a quick reference for some of the more common approaches used in dynamics analysis. Described are six methods of extracting damping from data: the half-power method, logarithmic decrement (decay rate) method, an autocorrelation/power spectral density fitting method, a frequency response fitting method, a random decrement fitting method, and a newly developed half-quadratic gain method. Additionally, state-space models and finite element method modeling tools, such as COMSOL Multiphysics (COMSOL), provide a theoretical damping via complex frequency. Each method has its advantages which are briefly noted. There are also likely many other advanced techniques in extracting damping within the operational modal analysis discipline, where an input excitation is unknown; however, these approaches discussed here are objective, direct, and can be implemented in a consistent manner.
Development of Composite Materials with High Passive Damping Properties
National Research Council Canada - National Science Library
Crocker, Malcolm J
2006-01-01
... structure with high damping. Composite sandwich structures have several advantages, such as their high strength-to-weight ratio, excellent thermal insulation, and good performance as water and vapor barriers...
Theory of sheath in a collisional multi-component plasma
Indian Academy of Sciences (India)
gate the interaction between a dusty plasma and a solid boundary. It has been mentioned that dust strongly influences all parameters of the sheath, in par- ticular, the electric field distributions and the ion flow velocities. The electric field of dust particles contributes to the distribution of the electric potential in the sheath and ...
International Nuclear Information System (INIS)
Guasp, J.; Liniers, M.
1998-01-01
The effects of radial electric fields on the non collisional losses, asymmetries at plasma border and on the Vacuum Vessel and trapping fractions for 0.1 1 KeV electrons in TJ-II are analysed. This study complements a series, already published, for ions, therefore only the main differences are stressed. Many of these effect are similar for electrons and ions, mainly the drastic decrease of losses with the electric field, the increasing peripherical loss concentration, the strong accumulation on the Hard Core (HC), the modification in the direction of the induced poloidal rotation, similar angular distributions for trapped particles, etc. Nevertheless, there appear also important differences, that in many cases are originated by the higher electron mobility, in particular a higher sensitivity to the electric field, as well to the intensity as to the sign, producing a faster drop in electron losses for positive potential and a higher asymmetry in the sign dependence. Most of these electron losses exit through the upper side of the plasma, the opposite happens for ions. The strong concentration on the HC appears, many, on the PL-1 plate (the one that is placed upside for toroidal angle φ=0 degree centigree), instead of the opposite PL-2 plate for ions.Finally, for the analysed energy range, there is no variation of electron trapping with the potential nor resonant effect. (Author) 8 refs
Passive Damping in Stiffened Structures Using Viscoelastic Polymers
Ahmad, Naveed
2016-01-01
Noise and vibration suppression is an important aspect in the design process of structures and machines. Undesirable vibrations can cause fatigue in a structure and are, therefore, a risk to the safety of a structure. One of the most effective and widely used methods of mitigating these unwanted vibrations from a system is passive damping, by using a viscoelastic material. This dissertation will primarily focus on constrained layer passive damping treatments in structures and the investigatio...
Radiative damping of standing acoustic waves in solar coronal loops
Bradshaw, S.J.; Erdelyi, R.
2008-01-01
Context. A detailed understanding of the physical processes that determine the damping timescales of magneto-acoustic waves is essential to interpret diagnostic results from the application of solar magneto-seismology.\\ud Aims. The influence of the transition region and the importance of radiative emission, arising from equilibrium and non-equilibrium ionisation balances, for the damping timescale of the fundamental mode standing acoustic wave is investigated.\\ud Methods. An extensive numeric...
Landau damping of dust acoustic solitary waves in nonthermal plasmas
Ghai, Yashika; Saini, N. S.; Eliasson, B.
2018-01-01
Dust acoustic (DA) solitary and shock structures have been investigated under the influence of Landau damping in a dusty plasma containing two temperature nonthermal ions. Motivated by the observations of Geotail spacecraft that reported two-temperature ion population in the Earth's magnetosphere, we have investigated the effect of resonant wave-particle interactions on DA nonlinear structures. The Korteweg-de Vries (KdV) equation with an additional Landau damping term is derived and its analytical solution is presented. The solution has the form of a soliton whose amplitude decreases with time. Further, we have illustrated the influence of Landau damping and nonthermality of the ions on DA shock structures by a numerical solution of the Landau damping modified KdV equation. The study of the time evolution of shock waves suggests that an initial shock-like pulse forms an oscillatory shock at later times due to the balance of nonlinearity, dispersion, and dissipation due to Landau damping. The findings of the present investigation may be useful in understanding the properties of nonlinear structures in the presence of Landau damping in dusty plasmas containing two temperature ions obeying nonthermal distribution such as in the Earth's magnetotail.
Dispersion and damping of two-dimensional dust acoustic waves: theory and simulation
International Nuclear Information System (INIS)
Upadhyaya, Nitin; Miskovic, Z L; Hou, L-J
2010-01-01
A two-dimensional generalized hydrodynamics (GH) model is developed to study the full spectrum of both longitudinal and transverse dust acoustic waves (DAW) in strongly coupled complex (dusty) plasmas, with memory-function-formalism being implemented to enforce high-frequency sum rules. Results are compared with earlier theories (such as quasi-localized charge approximation and its extended version) and with a self-consistent Brownian dynamics simulation. It is found that the GH approach provides a good account, not only of dispersion relations, but also of damping rates of the DAW modes in a wide range of coupling strengths, an issue hitherto not fully addressed for dusty plasmas.
On double reductions from symmetries and conservation laws for a damped Boussinesq equation
International Nuclear Information System (INIS)
Gandarias, M.L.; Rosa, M.
2016-01-01
In this work, we study a Boussinesq equation with a strong damping term from the point of view of the Lie theory. We derive the classical Lie symmetries admitted by the equation as well as the reduced ordinary differential equations. Some nontrivial conservation laws are derived by using the multipliers method. Taking into account the relationship between symmetries and conservation laws and applying the double reduction method, we obtain a direct reduction of order of the ordinary differential equations and in particular a kink solution.
Energy Technology Data Exchange (ETDEWEB)
Rubin, David L. [Cornell Univ., Ithaca, NY (United States). Dept. of Physics
2015-01-23
Accelerators that collide high energy beams of matter and anti-matter are essential tools for the investigation of the fundamental constituents of matter, and the search for new forms of matter and energy. A “Linear Collider” is a machine that would bring high energy and very compact bunches of electrons and positrons (anti-electrons) into head-on collision. Such a machine would produce (among many other things) the newly discovered Higgs particle, enabling a detailed study of its properties. Among the most critical and challenging components of a linear collider are the damping rings that produce the very compact and intense beams of electrons and positrons that are to be accelerated into collision. Hot dilute particle beams are injected into the damping rings, where they are compressed and cooled. The size of the positron beam must be reduced more than a thousand fold in the damping ring, and this compression must be accomplished in a fraction of a second. The cold compact beams are then extracted from the damping ring and accelerated into collision at high energy. The proposed International Linear Collider (ILC), would require damping rings that routinely produce such cold, compact and intense beams. The goal of the Cornell study was a credible design for the damping rings for the ILC. Among the technical challenges of the damping rings; the development of instrumentation that can measure the properties of the very small beams in a very narrow window of time, and mitigation of the forces that can destabilize the beams and prevent adequate cooling, or worse lead to beam loss. One of the most pernicious destabilizing forces is due to the formation of clouds of electrons in the beam pipe. The electron cloud effect is a phenomenon in particle accelerators in which a high density of low energy electrons, build up inside the vacuum chamber. At the outset of the study, it was anticipated that electron cloud effects would limit the intensity of the positron ring
Testing strong interaction theories
International Nuclear Information System (INIS)
Ellis, J.
1979-01-01
The author discusses possible tests of the current theories of the strong interaction, in particular, quantum chromodynamics. High energy e + e - interactions should provide an excellent means of studying the strong force. (W.D.L.)
Rydberg-atom formation in strongly correlated ultracold plasmas
International Nuclear Information System (INIS)
Bannasch, G.; Pohl, T.
2011-01-01
In plasmas at very low temperatures, the formation of neutral atoms is dominated by collisional three-body recombination, owing to the strong ∼T -9/2 scaling of the corresponding recombination rate with the electron temperature T. While this law is well established at high temperatures, the unphysical divergence as T→0 clearly suggests a breakdown in the low-temperature regime. Here, we present a combined molecular dynamics Monte Carlo study of electron-ion recombination over a wide range of temperatures and densities. Our results reproduce the known behavior of the recombination rate at high temperatures, but reveal significant deviations with decreasing temperature. We discuss the fate of the kinetic bottleneck and resolve the divergence problem as the plasma enters the ultracold, strongly coupled domain.
Damping Effects Induced by a Mass Moving along a Pendulum
Directory of Open Access Journals (Sweden)
E. Gandino
2014-01-01
Full Text Available The experimental study of damping in a time-varying inertia pendulum is presented. The system consists of a disk travelling along an oscillating pendulum: large swinging angles are reached, so that its equation of motion is not only time-varying but also nonlinear. Signals are acquired from a rotary sensor, but some remarks are also proposed as regards signals measured by piezoelectric or capacitive accelerometers. Time-varying inertia due to the relative motion of the mass is associated with the Coriolis-type effects appearing in the system, which can reduce and also amplify the oscillations. The analytical model of the pendulum is introduced and an equivalent damping ratio is estimated by applying energy considerations. An accurate model is obtained by updating the viscous damping coefficient in accordance with the experimental data. The system is analysed through the application of a subspace-based technique devoted to the identification of linear time-varying systems: the so-called short-time stochastic subspace identification (ST-SSI. This is a very simple method recently adopted for estimating the instantaneous frequencies of a system. In this paper, the ST-SSI method is demonstrated to be capable of accurately estimating damping ratios, even in the challenging cases when damping may turn to negative due to the Coriolis-type effects, thus causing amplifications of the system response.
Nonlinear wave damping due to multi-plasmon resonances
Brodin, G.; Ekman, R.; Zamanian, J.
2018-02-01
For short wavelengths, it is well known that the linearized Wigner–Moyal equation predicts wave damping due to wave-particle interaction, where the resonant velocity shifted from the phase velocity by a velocity {v}q={{\\hslash }}k/2m. Here {{\\hslash }} is the reduced Planck constant, k is the wavenumber and m is the electron mass. Going beyond linear theory, we find additional resonances with velocity shifts {{nv}}q,n=2,3, \\ldots , giving rise to a new wave-damping mechanism that we term multi-plasmon damping, as it can be seen as the simultaneous absorption (or emission) of multiple plasmon quanta. Naturally this wave damping is not present in classical plasmas. For a temperature well below the Fermi temperature, if the linear (n = 1) resonant velocity is outside the Fermi sphere, the number of linearly resonant particles is exponentially small, while the multi-plasmon resonances can be located in the bulk of the distribution. We derive sets of evolution equations for the case of two-plasmon and three-plasmon resonances for Langmuir waves in the simplest case of a fully degenerate plasma. By solving these equations numerically for a range of wave-numbers we find the corresponding damping rates, and we compare them to results from linear theory to estimate the applicability. Finally, we discuss the effects due to a finite temperature.
Study of damping characteristics of fibre reinforced composite aerospace structure
International Nuclear Information System (INIS)
Khan, M.Z.; Saleh, S.; Munir, A.
2006-01-01
Composite materials are used in a variety of high demanding structural applications. Apart from their other preferable properties, they have high-energy dissipation characteristics, which is important aspect when we repeatedly wiggle the system back and forth. It is important to have thorough understanding of material damping behavior; in general materials damping tends to be complex nonlinear function of vibration amplitude, frequency of loading and material formulation. There are number of mathematical models available in literature to obtain hysteresis curves. One approach for identifying damping characteristics used mechanical hysteresis curves. In present work, a phenomenon was observed during testing of fibre reinforced composite beam of an aerospace structure, that for increase load in structure, the path of Force vs. Displacement curve is different than the path of unloading. A plot is generated which indicate the hysteresis loop representing the steady state dynamic behavior of material. The area enclosed by such curves is proportional to energy dissipation per cycle. However, the specific shape of the curve also has important implications for characterizing the specific functional form of the damping. Therefore, it is important to develop methods for accurately accounting for such effects. The current work explores the damping characteristics both theoretically and experimentally. (author)
DAMP-TLR-cytokine axis dictates the fate of tumor.
Patidar, Ashok; Selvaraj, Sathishkumar; Sarode, Aditya; Chauhan, Prashant; Chattopadhyay, Debprasad; Saha, Bhaskar
2017-10-09
Random mutations leading to loss of cell cycle control is not a rare occurrence in an organism but the mutated cells are recognized and eliminated preventing the development of a tumor. These potentially tumorigenic cells release damage-associated molecular patterns (DAMPs), which are recognized by toll-like receptors (TLRs) on macrophages and dendritic cells. The initial TLR-DAMP interactions lead to different responses such as altered antigen presentation and cytokine release that directly affect T cell activation and removal of the tumorigenic cells. The indirect effects of TLR-DAMP interaction include chemokine-directed altered T cell trafficking, angiogenesis for both T cell infiltration and tumor cell metastasis, and alteration of intra-tumoral milieu contributing to the development of tumor cells heterogeneity. Thus, the initial TLR-DAMP interaction has a set of local effects that modulate tumor cell growth and heterogeneity and a disseminating set of central effects that dynamically affect T cell trafficking and functions. Herein, we argue that the DAMP-TLR-cytokine axis in the tumor microenvironment serves as the mainstay that orchestrates and regulates the pro- and anti-tumor elements which dynamically interact between themselves eventuating in tumor regression or growth. The knowledge of this TLR-based immuno-surveillance framework is a key to developing a novel immunotherapy against cancer. Copyright © 2017. Published by Elsevier Ltd.
A damping ring design for future linear colliders
International Nuclear Information System (INIS)
Raubenheimer, T.O.; Gabella, W.E.; Morton, P.L.; Lee, M.J.; Rivkin, L.Z.; Ruth, R.D.
1989-03-01
In this paper we present a preliminary design of a damping ring for the TeV Linear Collider (TLC), a future linear collider with an energy of 1/2 to 1 TeV in the center of mass. Because of limits on the emittance, repetition rate and longitudinal impedance, we use combined function FODO cells with wigglers in insertion regions; there are approximately 22 meters of wigglers in the 155 meter ring. The ring has a normalized horizontal emittance, including the effect of intrabeam scattering, which is less than 3 /times/ 10/sup /minus/6/ and an emittance ratio of ε/sub x/ ∼ 100ε/sub y/. It is designed to damp bunches for 7 vertical damping times while operating at a repetition rate of 360 Hz. Because of these requirements on the emittance and the damping per bunch, the ring operates at 1.8 GeV and is relatively large, allowing more bunches to be damped at once. 10 refs., 5 figs., 2 tabs
International Nuclear Information System (INIS)
Wang, G. Q.; Ma, J.; Weiland, J.; Zang, Q.
2013-01-01
We have made the first drift wave study of particle transport in the Experimental Advanced Superconducting Tokamak (Wan et al., Nucl. Fusion 49, 104011 (2009)). The results reveal that collisions make the particle flux more inward in the high collisionality regime. This can be traced back to effects that are quadratic in the collision frequency. The particle pinch is due to electron trapping which is not very efficient in the high collisionality regime so the approach to equilibrium is slow. We have included also the electron temperature gradient (ETG) mode to give the right electron temperature gradient, since the Trapped Electron Mode (TE mode) is weak in this regime. However, at the ETG mode number ions are Boltzmann distributed so the ETG mode does not give particle transport
Exponentially long Equilibration times in a 1-D Collisional Model of a classical gas
DEFF Research Database (Denmark)
Hjorth, Poul; Benettin, G.
1999-01-01
Around the year 1900, J.H. Jeans suggested that the `abnormal' specific heats observed in diatomic gases, specifically the lack of contribution to the heat capacity from the internal vibrational degrees of freedom, in apparent violation of the equipartition theorem, might be caused by the large...... separation between the time scale for the vibration and the time scale associated with a typical binary collision in the gas. We consider here a simple 1-D model, and show how, when these time scales are well separated, the collisional dynamics is constrained by a many-particle adiabatic invariant....... The effect is that the collisional energy exchanges between the translational and the vibrational degrees of freedom are slowed down by an exponential factor (as Jeans conjectured). A metastable situation thus occurs, in which the fast vibrational degrees of freedom effectivly do not contribute...
Nonextensive statistics and skin depth of transverse wave in collisional plasma
Energy Technology Data Exchange (ETDEWEB)
Hashemzadeh, M., E-mail: hashemzade@gmail.com [Faculty of Physics, Shahrood University of Technology, Shahrood (Iran, Islamic Republic of)
2016-05-15
Skin depth of transverse wave in a collisional plasma is studied taking into account the nonextensive electron distribution function. Considering the kinetic theory for charge particles and using the Bhatnagar-Gross-Krook collision model, a generalized transverse dielectric permittivity is obtained. The transverse dispersion relation in different frequency ranges is investigated. Obtaining the imaginary part of the wave vector from the dispersion relation, the skin depth for these frequency ranges is also achieved. Profiles of the skin depth show that by increasing the q parameter, the penetration depth decreases. In addition, the skin depth increases by increasing the electron temperature. Finally, it is found that in the high frequency range and high electron temperature, the penetration depth decreases by increasing the collision frequency. In contrast, by increasing the collision frequency in a highly collisional frequency range, the skin depth of transverse wave increases.
Collisional transport across the magnetic field in drift-fluid models
DEFF Research Database (Denmark)
Madsen, Jens; Naulin, Volker; Nielsen, Anders Henry
2016-01-01
Drift ordered fluid models are widely applied in studies of low-frequency turbulence in the edge and scrape-off layer regions of magnetically confined plasmas. Here, we show how collisional transport across the magnetic field is self-consistently incorporated into drift-fluid models without...... altering the drift-fluid energy integral. We demonstrate that the inclusion of collisional transport in drift-fluid models gives rise to diffusion of particle density, momentum, and pressures in drift-fluid turbulence models and, thereby, obviates the customary use of artificial diffusion in turbulence...... simulations. We further derive a computationally efficient, two-dimensional model, which can be time integrated for several turbulence de-correlation times using only limited computational resources. The model describes interchange turbulence in a two-dimensional plane perpendicular to the magnetic field...
International Nuclear Information System (INIS)
Liu Qiuyan; Li Hong; Chen Zhipeng; Xie Jinlin; Liu Wandong
2011-01-01
Continuous emission spectrum measurement is applied for the inconvenient diagnostics of low-temperature collisional plasmas. According to the physical mechanism of continuous emission, a simplified model is presented to analyze the spectrum in low temperature plasma. The validity of this model is discussed in a wide range of discharge parameters, including electron temperature and ionization degree. Through the simplified model, the continuous emission spectrum in a collisional argon internal inductively coupled plasma is experimentally measured to determine the electron temperature distribution for different gas pressures and radio-frequency powers. The inverse Abel transform is also applied for a better spatially resoluted results. Meanwhile, the result of the continuous emission spectrum measurement is compared to that of the electrostatic double probes, which indicates the effectiveness of this method. (low temperature plasma)
International Nuclear Information System (INIS)
Liffman, K.
1990-01-01
The effects of catastrophic collisional fragmentation and diffuse medium accretion on a the interstellar dust system are computed using a Monte Carlo computer model. The Monte Carlo code has as its basis an analytic solution of the bulk chemical evolution of a two-phase interstellar medium, described by Liffman and Clayton (1989). The model is subjected to numerous different interstellar processes as it transfers from one interstellar phase to another. Collisional fragmentation was found to be the dominant physical process that shapes the size spectrum of interstellar dust. It was found that, in the diffuse cloud phase, 90 percent of the refractory material is locked up in the dust grains, primarily due to accretion in the molecular medium. This result is consistent with the observed depletions of silicon. Depletions were found to be affected only slightly by diffuse cloud accretion. 42 refs
Dispersion in the presence of strong transverse wakefields
Energy Technology Data Exchange (ETDEWEB)
Assmann, R.; Chao, A.
1997-07-01
To minimize emittance growth in a long linac, it is necessary to control the wakefields by correcting the beam orbit excursions. In addition, the particle energy is made to vary along the length of the bunch to introduce a damping, known as the BNS damping, to the beam break-up effect. In this paper, the authors use a two-particle model to examine the relative magnitudes of the various orbit and dispersion functions involved. The results are applied to calculate the effect of a closed orbit bump and a misaligned structure. It is shown that wake-induced dispersion is an important contribution to the beam dynamics in long linacs with strong wakefields like SLC.
Dispersion in the Presence of Strong Transverse Wakefields
Energy Technology Data Exchange (ETDEWEB)
Assmann, Ralph; Chao, Alex; /SLAC
2011-08-12
To minimize emittance growth in a long linac, it is necessary to control the wakefields by correcting the beam orbit excursions. In addition, the particle energy is made to vary along the length of the bunch to introduce a damping, known as the BNS damping, to the beam break-up effect. In this paper, we use a two-particle model to examine the relative magnitudes of the various orbit and dispersion functions involved. The results are applied to calculate the effect of a closed orbit bump and a misaligned structure. It is shown that wake-induced dispersion is an important contribution to the beam dynamics in long linacs with strong wakefields like SLC.
Schneider, P. A.; Bustos, A.; Hennequin, P.; Ryter, F.; Bernert, M.; Cavedon, M.; Dunne, M. G.; Fischer, R.; Görler, T.; Happel, T.; Igochine, V.; Kurzan, B.; Lebschy, A.; McDermott, R. M.; Morel, P.; Willensdorfer, M.; the ASDEX Upgrade Team; The EUROfusion MST1 Team
2017-06-01
In ASDEX Upgrade (AUG), the normalised gyroradius {ρ\\star} was varied via a hydrogen isotope scan while keeping other dimensionless parameters constant. This was done in L-mode, to minimise the impact of pedestal stability on confinement. Power balance and perturbative transport analyses reveal that the electron heat transport is unaffected by the differences in isotope mass. Nonlinear simulations with the Gene code suggest that these L-mode discharges are ion temperature gradient (ITG) dominated. The different gyroradii due to the isotope mass do not necessarily result in a change of the predicted heat fluxes. This result is used in simulations with the Astra transport code to match the experimental profiles. In these simulations the experimental profiles and confinement times are reproduced with the same transport coefficients for hydrogen and deuterium plasmas. The mass only enters in the energy exchange term between electrons and ions. These numerical observations are supported by additional experiments which show a lower ion energy confinement compared to that of the electrons. Additionally, hydrogen and deuterium plasmas have a similar confinement when the energy exchange time between electrons and ions is matched. This strongly suggests that the observed isotope dependence in L-mode is not dominated by a gyroradius effect, but a consequence of the mass dependence in the collisional energy exchange between electrons and ions.
International Nuclear Information System (INIS)
Belkhiri, Madeny
2014-01-01
In hot dense plasmas, the free-electron and ion spatial distribution may strongly affect the atomic structure. To account for such effects we have implemented a potential correction based on the uniform electron gas model and on a Thomas-Fermi Approach in the Flexible Atomic Code (FAC). This code has been applied to obtain energies, wave-functions and radiative rates modified by the plasma environment. In hydrogen-like ions, these numerical results have been successfully compared to an analytical calculation based on first-order perturbation theory. In the case of multi-electron ions, we observe level crossings in agreement with another recent model calculation. Various methods for the collision cross-section calculations are reviewed. The influence of plasma environment on these cross-sections is analyzed in detail. Some analytical expressions are proposed for hydrogen-like ions in the limit where Born or Lotz approximations apply and are compared to the numerical results from the FAC code. Finally, from this work, we study the influence of the plasma environment on our collisional-radiative model so-called Foch. Because of this environment, the mean charge state of the ions increases. The line shift is observed on the bound-bound emission spectra. A good agreement is found between our work and experimental data on a Titanium plasma. (author) [fr
Low Gilbert damping in Co2FeSi and Fe2CoSi films
Sterwerf, Christian; Paul, Soumalya; Khodadadi, Behrouz; Meinert, Markus; Schmalhorst, Jan-Michael; Buchmeier, Mathias; Mewes, Claudia K. A.; Mewes, Tim; Reiss, Günter
2016-08-01
Thin highly textured Fe1+xCo2-xSi (0 ≤ x ≤ 1) films were prepared on MgO (001) substrates by magnetron co-sputtering. Magneto-optic Kerr effect (MOKE) and ferromagnetic resonance (FMR) measurements were used to investigate the composition dependence of the magnetization, the magnetic anisotropy, the gyromagnetic ratio, and the relaxation of the films. Both MOKE and FMR measurements reveal a pronounced fourfold anisotropy for all films. In addition, we found a strong influence of the stoichiometry on the anisotropy as the cubic anisotropy strongly increases with increasing Fe concentration. The gyromagnetic ratio is only weakly dependent on the composition. We find low Gilbert damping parameters for all films with values down to 0.0012 ±0.00010.0007 for Fe1.75Co1.25Si. The effective damping parameter for Co2FeSi is found to be 0.0018 ±0.00040.0034 . We also find a pronounced anisotropic relaxation, which indicates significant contributions of two-magnon scattering processes that is strongest along the easy axes of the films. This makes thin Fe1+xCo2-xSi films ideal materials for the application in spin transfer-torque magnetic RAM (STT-MRAM) devices.
A high phase advance damped and detuned structure for the main linacs of CLIC
Khan, V.F.; Grudiev, A.; Jones, R.M.; Wuensch, W.
2010-01-01
The main accelerating structures for the CLIC are designed to operate at an average accelerating gradient of 100 MV/m. The accelerating frequency has been optimised to 11.994 GHz with a phase advance of 2π/3 [1] of the main accelerating mode. The moderately damped and detuned structure (DDS) design [2-3] is being studied as an alternative to the strongly damped WDS design [1]. Both these designs are based on the nominal accelerating phase advance. Here we explore high phase advance (HPA) structures in which the group velocity of the rf fields is reduced compared to that of standard (2π/3) structures. The electrical breakdown strongly depends on the fundamental mode group velocity. Hence it is expected that electrical breakdown is less likely to occur in the HPA structures. We report on a study of both the fundamental and dipole modes in a CLIC_DDS_ HPA structure, designed to operate at 5π/6 phase advance per cell. Higher order dipole modes in both the standard and HPA structures are also studied.
Generation of poloidal magnetic field in a hot collisional plasma by inverse Faraday effect
International Nuclear Information System (INIS)
Srivastava, M.K.; Lawande, S.V.; Dutta, D.; Sarkar, S.; Khan, M.; Chakraborty, B.
1996-01-01
Generation of poloidal magnetic field in a hot and collisional plasma by an inverse Faraday effect is discussed. This field can either be induced by a circularly polarized laser beam (CPLB) or a plane-polarized laser beam (PPLB). For the CPLB, an average field left-angle Re x right-angle ∼I 0 λ∼11.6 MG could be produced in a DT plasma for a high intensity (I 0 =10 22 W/m 2 ) and shorter wavelength (λ=0.35 μm) laser. This field is essentially induced by the field inhomogeneity effect and dominates over that induced by the plasma inhomogeneity effect (left-angle Re x right-angle ∼I 2/3 0 λ 7/3 ∼2.42 MG). The collisional and thermal contribution to left-angle Re x right-angle is just negligible for the CPLB. However, in the case of PPLB the poloidal field is generated only for a hot and collisional plasma and can be quite large for a longer wavelength laser (e.g., CO 2 laser, λ=10.6 μm). The collisional effect induces a field left-angle Re x right-angle ∼0.08 kG, which dominates near the turning point and is independent of the laser parameters. However, in the outer cronal region the thermal pressure effect dominates (e.g., left-angle Re x right-angle ∼I 5/3 0 λ 4/3 ∼3.0 MG). Further, left-angle Re x right-angle for the p-polarized beam is, in general, relatively smaller than that for the s-polarized beam. Practical implications of these results and their limitations are discussed. copyright 1996 American Institute of Physics
Collisional broadening of depolarized spectral lines of hydrogen gases at low temperatures
International Nuclear Information System (INIS)
Hout, K.D. van den.
1978-01-01
Experimental results are presented for the collisional broadening and shift of H 2 , D 2 and HD rotational Raman and depolarized Rayleigh lines at various temperatures between 25 K and 300 K. These are then discussed within the context of current theoretical concepts. For a few temperatures the line broadening cross sections are also reported as a function of the ortho-para composition for H 2 and D 2 . (C.F.)
Lederer. S. M.; Jensen, E. A.; Wooden, D. H.; Lindsay, S. S.; Smith, D. C.; Cintala, M. J.; Nakamura-Messenger, K.; Keller, L. P.
2012-01-01
Impacts into forsterite and orthoenstatite at speeds typically encountered by comets demonstrate that shock imparted by collisions is detectable in the infrared signatures of their dust. The spectral signatures can be traced to physical alterations in their crystalline structures, as observed in TEM imaging and modeled using a dipole approximation. These results yield tantalizing insights into the collisional history of our solar system, as well as the history of individual comets and Trojan asteroids.
Energy Technology Data Exchange (ETDEWEB)
Han, Cheng; Hou, De-fu; Li, Jia-rong [Central China Normal University, Key Laboratory of Quark and Lepton Physics (MOE) and Institute of Particle Physics, Wuhan, Hubei (China); Jiang, Bing-feng [Hubei University for Nationalities, Center for Theoretical Physics and School of Sciences, Enshi, Hubei (China)
2017-10-15
The dielectric functions ε{sub L}, ε{sub T} of the quark-gluon plasma (QGP) are derived within the framework of the kinetic theory with BGK-type collisional kernel. The collision effect manifested by the collision rate is encoded in the dielectric functions. Based on the derived dielectric functions we study the collisional energy loss suffered by a fast parton traveling through the QGP. The numerical results show that the collision rate increases the energy loss. (orig.)
Collisional-Radiative Modeling of Tungsten at Temperatures of 1200–2400 eV
Directory of Open Access Journals (Sweden)
James Colgan
2015-04-01
Full Text Available We discuss new collisional-radiative modeling calculations of tungsten at moderate temperatures of 1200 to 2400 eV. Such plasma conditions are relevant to ongoing experimental work at ASDEX Upgrade and are expected to be relevant for ITER. Our calculations are made using the Los Alamos National Laboratory (LANL collisional-radiative modeling ATOMIC code. These calculations formed part of a submission to the recent NLTE-8 workshop that was held in November 2013. This series of workshops provides a forum for detailed comparison of plasma and spectral quantities from NLTE collisional-radiative modeling codes. We focus on the LANL ATOMIC calculations for tungsten that were submitted to the NLTE-8 workshop and discuss different models that were constructed to predict the tungsten emission. In particular, we discuss comparisons between semi-relativistic configuration-average and fully relativistic configuration-average calculations. We also present semi-relativistic calculations that include fine-structure detail, and discuss the difficult problem of ensuring completeness with respect to the number of configurations included in a CR calculation.
On the steady state collisional evolution of debris disks around M dwarfs
Morey, Étienne; Lestrade, Jean-François
2014-05-01
Debris disks have been found primarily around intermediate and solar mass stars (spectral types A-K), but rarely around low-mass M-type stars. This scarcity of detections in M star surveys can be confronted with the predictions of the steady state collisional evolution model. First, we determine the parameters of the disk population evolved with this model and fit to the distribution of the fractional dust luminosities measured in the surveys of A- and FGK-type stars observed by the infrared satellite Spitzer. Thus, in our approach, we stipulate that the initial disk mass distribution is bimodal and that only high-mass collisionally-dominated disks are detected. The best determined parameter is the diameter Dc of the largest planetesimals in the collisional cascade of the model, which ranges between 2 and 60 km, consistently for disks around both A- and FGK-type stars. Second, we assume that the same disk population surrounds the M dwarfs that have been the subjects of debris disk searches in the far-infrared with Spitzer and at submillimeter wavelengths with radiotelescopes. We find, in the framework of our study, that this disk population, which has been fit to the AFGK data, is still consistent with the observed lack of disks around M dwarfs with Spitzer.
Energy spread in SLC linac with Landau damping
International Nuclear Information System (INIS)
Seeman, J.
1984-01-01
The possibility of using Landau damping to reduce the growth of the beam size due to transverse wake fields has been known for some time. Recently K. Bane has calculated the effects of Landau damping for the SLC. The energy spread is then slowly removed so that at the end of the linac it has returned to the SLC specification of less than +0.5%. The purpose of the energy spread is to reduce the resonant driving of the tail of the bunch by the head. In this note the expected energy spreads within the beam are tabulated at various positions along the linac for use by those people designing momentum dependent equipment and for those interested in Landau damping
Damping augmentation of helicopter rotors using magnetorheological dampers
Zhao, Yongsheng
This dissertation describes an investigation exploring the use of magnetorheological (MR) dampers to augment the stability of helicopter rotors. Helicopters with advanced soft in-plane rotors are susceptible to ground resonance instabilities due to the coupling of the lightly damped rotor lag modes and fuselage modes. Traditional passive lag dampers, such as hydraulic or elastomeric dampers, can be used to alleviate these instabilities. However, these passive dampers suffer from the disadvantages that they produce large damper loads in forward flight conditions. These damper forces increase fatigue loads and reduce component life. Thus, it is desirable to have lag dampers controllable or adaptable, so that the damper can apply loads only when needed. MR fluid based dampers have recently been considered for helicopter lag damping augmentation because the forces generated by these dampers can be controlled by an applied magnetic field. In this dissertation, control schemes to integrate MR dampers with helicopters are developed and the influences of the MR dampers on rotorcraft ground resonance are studied. Specifically, the MR dampers are incorporated into the ground resonance model in two ways: using a linear equivalent viscous damping and using a nonlinear damper model. The feasibility of using MR dampers to stabilize ground resonance is studied. The open loop on-off control is utilized where MR dampers are turned on over RPM where ground resonance occurs, and turned off otherwise. To further explore the damping control ability of MR dampers, the nonlinear semi-active closed loop feedback control strategies are developed: feedback linearization control and sliding mode control. The performance of the two control strategies is evaluated using two examples: to stabilize an unstable rotor and to augment the stability of a marginally stable rotor. In addition, the robustness of the closed loop control strategies is studied using two cases: damper degradation and
Digital notch filter based active damping for LCL filters
DEFF Research Database (Denmark)
Yao, Wenli; Yang, Yongheng; Zhang, Xiaobin
2015-01-01
LCL filters are widely used in Pulse Width Modulation (PWM) inverters. However, it also introduces a pair of unstable resonant poles that may challenge the controller stability. The passive damping is a convenient possibility to tackle the resonance problem at the cost of system overall efficiency....... In this paper, a notch filter based active damping without the requirement of additional sensors is proposed, where the inverter current is employed as the feedback variable. Firstly, a design method of the notch filter for active damping is presented. The entire system stability has then been investigated......, which has revealed that negative variations of the resonant frequency can seriously affect the system stability. In order to make the controller more robust against grid impedance variations, the notch filter frequency is thus designed smaller than the LCL filter resonant frequency, which is done...
Damping of cylindrical structures subject to annular flow
International Nuclear Information System (INIS)
Hobson, D.E.; Dolding, M.
1989-01-01
In previous reports theoretical methods have been described for estimating the aerodynamic forces acting on cylinders vibrating laterally when surrounded by an annulus carrying high velocity gas. For a certain restricted set of geometries it is possible to predict whether a particular structure is stable or unstable and to determine the level of aerodynamic damping positive or negative due to the presence of the gas. This report describes experimental work which validates the computer program in which the theoretical methods are embodied; in particular the damping, inertial and decentralising forces acting on a cylinder in an annulus are measured and compared with theory over a range of frequencies from 0 to 25 Hz, and of Reynolds numbers from zero to 10 4 . In addition a summary of simple relationships is provided which can be used to provide credible initial estimates of both the positive and negative damping of cylinders in a range of annular geometries. (author)
Dynamic buckling of containments: The influence of damping
International Nuclear Information System (INIS)
Farrar, C.R.; Duffey, T.A.; Goldman, P.A.; Bennett, J.G.
1993-01-01
The seismic buckling capacities of representative thin, unstiffened elastic containment shells are investigated to evaluate the sensitivity of buckling to the damping level. The finite element method with transient time integration is utilized with both actual earthquake acceleration-time signals and artificial time histories generated from regulatory spectra. The dynamic response and subsequent buckling of the selected containment shells are found to be highly dependent on both damping level and the degree to which the input signal excites the fundamental shear-bending mode of the shell. Transient stresses and buckling levels for the two containment shells induced by the seismic inputs were reduced in the range of 12% to 111% by increasing the damping level from 1% to 4% of critical
Endurance of Damping Properties of Foam-Filled Tubes
Directory of Open Access Journals (Sweden)
Matteo Strano
2015-07-01
Full Text Available The favorable energy-absorption properties of metal foams have been frequently proposed for damping or anti-crash applications. The aim of this paper is to investigate the endurance of these properties for composite structures, made by a metal or a hybrid metal-polymeric foam used as the core filling of a tubular metal case. The results of experimental tests are shown, run with two types of structures: 1 square steel tubes filled with aluminum or with hybrid aluminum-polymer foams; 2 round titanium tubes filled with aluminum foams. The paper shows that the damping properties of a foam-filled tube change (improve with the number of cycles, while all other dynamic properties are nearly constant. This result is very important for several potential applications where damping is crucial, e.g., for machine tools.
Endurance of Damping Properties of Foam-Filled Tubes.
Strano, Matteo; Marra, Alessandro; Mussi, Valerio; Goletti, Massimo; Bocher, Philippe
2015-07-07
The favorable energy-absorption properties of metal foams have been frequently proposed for damping or anti-crash applications. The aim of this paper is to investigate the endurance of these properties for composite structures, made by a metal or a hybrid metal-polymeric foam used as the core filling of a tubular metal case. The results of experimental tests are shown, run with two types of structures: 1) square steel tubes filled with aluminum or with hybrid aluminum-polymer foams; 2) round titanium tubes filled with aluminum foams. The paper shows that the damping properties of a foam-filled tube change (improve) with the number of cycles, while all other dynamic properties are nearly constant. This result is very important for several potential applications where damping is crucial, e.g., for machine tools.
Simulations of moving effect of coastal vegetation on tsunami damping
Tsai, Ching-Piao; Chen, Ying-Chi; Octaviani Sihombing, Tri; Lin, Chang
2017-05-01
A coupled wave-vegetation simulation is presented for the moving effect of the coastal vegetation on tsunami wave height damping. The problem is idealized by solitary wave propagation on a group of emergent cylinders. The numerical model is based on general Reynolds-averaged Navier-Stokes equations with renormalization group turbulent closure model by using volume of fluid technique. The general moving object (GMO) model developed in computational fluid dynamics (CFD) code Flow-3D is applied to simulate the coupled motion of vegetation with wave dynamically. The damping of wave height and the turbulent kinetic energy along moving and stationary cylinders are discussed. The simulated results show that the damping of wave height and the turbulent kinetic energy by the moving cylinders are clearly less than by the stationary cylinders. The result implies that the wave decay by the coastal vegetation may be overestimated if the vegetation was represented as stationary state.
Quantal dynamics of charge equilibration in damped nuclear collisions
International Nuclear Information System (INIS)
Hernandez, E.S.; Myers, W.D.; Randrup, J.; Remaud, B.
1981-01-01
The change in the projectile charge and the dispersion in its value that arise in the course of a damped nuclear collision are treated quantum mechanically in terms of a collective mode analogous to the giant dipole resonance in spherical nuclei. First a classical trajectory calculation is performed to determine the time evolution of the neck which opens between the two nuclei during the reaction and a simplified hydrodynamic model is used to estimate the corresponding values of the inertial and damping coefficients for the charge asymmetry degree of freedom. Then a damped time-dependent Schroedinger equation is solved for the final values of the mean charge and its dispersion GAMMAsub(F)sub(W)sub(H)sub(M) and these predictions are compared with measured values. (orig.)
Temperature dependent measurement of internal damping of austenitic stainless steels
Directory of Open Access Journals (Sweden)
Oravcová Monika
2018-01-01
Full Text Available This article is aimed on the analysis of the internal damping changes of austenitic stainless steels AISI 304, AISI 316L and AISI 316Ti depending from temperature. In experimental measurements only resonance method was used which is based on continuous excitation of oscillations of the specimens and the whole apparatus vibrates at the frequency near to the resonance. Microplastic processes and dissipation of energy within the metals are evaluated and investigated by internal damping measurements. Damping capacity of materials is closely tied to the presence of defects including second phase particles and voids. By measuring the energy dissipation in the material, we can determine the elastic characteristics, Youngs modulus, the level of stress relaxation and many other.
Calculation of Gilbert damping in ferromagnetic ﬁlms
Directory of Open Access Journals (Sweden)
Edwards D. M.
2013-01-01
Full Text Available The Gilbert damping constant in the phenomenological Landau-Lifshitz-Gilbert equation which describes the dynamics of magnetization, is calculated for Fe, Co and Ni bulk ferromagnets, Co ﬁlms and Co/Pd bilayers within a nine-band tight-binding model with spin-orbit coupling included. The calculational effciency is remarkably improved by introducing ﬁnite temperature into the electronic occupation factors and subsequent summation over the Matsubara frequencies. The calculated dependence of Gilbert damping constant on scattering rate for bulk Fe, Co and Ni is in good agreement with the results of previous ab initio calculations. Calculations are reported for ferromagnetic Co metallic ﬁlms and Co/Pd bilayers. The dependence of the Gilbert damping constant on Co ﬁlm thickness, for various scattering rates, is studied and compared with recent experiments.
Evaluation of Damping Using Time Domain OMA Techniques
DEFF Research Database (Denmark)
Bajric, Anela; Brincker, Rune; Georgakis, Christos T.
2014-01-01
The prevailing Operational Modal Analysis (OMA) techniques provide in most cases reasonably accurate estimates of structural frequencies and mode shapes. In contrast though, they are known to often produce poor structural damping estimates, which is mainly due to inherent random and/or bias errors...... Time Domain (ITD), Eigenvalue Realization Algorithm (ERA) and the Polyreference Time Domain (PTD). The response of a two degree-of-freedom (2DOF) system is numerically established from specified modal parameters with well separated and closely spaced modes. Two types of response are considered, free...... response and random response from white noise loading. Finally, the results of the numerical study are presented, in which the error of the structural damping estimates obtained by each OMA technique is shown for a range of damping levels. From this, it is clear that there are notable differences...
Nanoscale shape-memory alloys for ultrahigh mechanical damping.
San Juan, Jose; Nó, Maria L; Schuh, Christopher A
2009-07-01
Shape memory alloys undergo reversible transformations between two distinct phases in response to changes in temperature or applied stress. The creation and motion of the internal interfaces between these phases during such transformations dissipates energy, making these alloys effective mechanical damping materials. Although it has been shown that reversible phase transformations can occur in nanoscale volumes, it is not known whether these transformations have a sample size dependence. Here, we demonstrate that the two phases responsible for shape memory in Cu-Al-Ni alloys are more stable in nanoscale pillars than they are in the bulk. As a result, the pillars show a damping figure of merit that is substantially higher than any previously reported value for a bulk material, making them attractive for damping applications in nanoscale and microscale devices.
Parker, Joseph T.
2015-02-03
Copyright © Cambridge University Press 2015. We study Landau damping in the 1+1D Vlasov-Poisson system using a Fourier-Hermite spectral representation. We describe the propagation of free energy in Fourier-Hermite phase space using forwards and backwards propagating Hermite modes recently developed for gyrokinetic theory. We derive a free energy equation that relates the change in the electric field to the net Hermite flux out of the zeroth Hermite mode. In linear Landau damping, decay in the electric field corresponds to forward propagating Hermite modes; in nonlinear damping, the initial decay is followed by a growth phase characterized by the generation of backwards propagating Hermite modes by the nonlinear term. The free energy content of the backwards propagating modes increases exponentially until balancing that of the forward propagating modes. Thereafter there is no systematic net Hermite flux, so the electric field cannot decay and the nonlinearity effectively suppresses Landau damping. These simulations are performed using the fully-spectral 5D gyrokinetics code SpectroGK, modified to solve the 1+1D Vlasov-Poisson system. This captures Landau damping via Hou-Li filtering in velocity space. Therefore the code is applicable even in regimes where phase mixing and filamentation are dominant.
Jacobs, William; Boonen, Rene; Sas, Paul; Moens, David
2014-01-01
This paper experimentally investigates the formation of a lubricant film in a deep groove ball bearing and its effect on the bearing dynamics. A novel test rig is introduced, which allows testing different types and sizes of bearings in real-life conditions. The test rig dynamics are optimised such that the dynamic properties of the bearing are measured in a frequency range below the resonances of the flexible modes. Two properties of the bearing, both its stiffness and damping value in the direction of the static bearing load, are identified. The behaviour of the lubricant film between the rolling elements and raceways is measured based on the electrical resistance through the bearing. For this purpose, the bearing housing is electrically isolated from the surrounding structure. The electrical resistance, stiffness and damping of the test bearing are identified during a speed run-up. The influence of the bearing temperature is analysed as well. During a run-up at constant bearing temperature, the measurement of the electrical resistance describes the formation of the lubricant film. Due to the formation of the lubricant film, the bearing stiffness increases by 3.2% while the damping increases by 24%. During a warm-up of the bearing, the viscosity of the lubricant film decreases strongly. A resulting decrease in electrical resistance, stiffness and damping is measured. Finally, the electrical resistance, stiffness and damping are identified at different speeds, after the bearing has reached a stable temperature at each speed. A combined effect of both rotation and temperature is observed and discussed.
Variation of structural damping with response amplitude in piping systems
International Nuclear Information System (INIS)
Ware, A.G.
1986-01-01
From tests conducted over the last several years, it has become apparent that structural damping is not a single number applicable to all piping systems, but is highly dependent on piping system parameters such as supports, response amplitude, and insulation. As a result, there is considerable scatter in the available data. Furthermore, the relationships between the parameters and damping are often highly complex, interrelated, and difficult to predict. From tests of piping supported by various typical methods, two basic types of energy dissipation in the supports can be observed. The first is friction such as between spring hangers and their housings or in the internal mechanisms of constant force hangers. The second is impacting such as occurs in snubbers, rigid struts, and rod hangers. Overall, these effects lead to a wide variety of possibilities that can occur at low vibration levels and can change with only a slight perturbation of vibration amplitude. This can account for much of the scatter in the data at low strain levels. Thus damping is almost impossible to predict at low amplitudes, and extrapolation of this type data to higher amplitudes is cautioned. However, once strain levels rise above 100 to 200 micro in/in, the damping trend becomes easier to characterize. From the 100 to 200 micro in/in to 800 to 1000 micro in/in range the damping is fairly constant and is induced primarily by the supports. At the upper end of this range a threshold is reached in which damping increases with increasing strain amplitude. Data in the high strain (plastic range) is sparse since the test usually renders the pipe unsuitable for further use. 15 refs
Studi Pemasangan Damping Reaktor untuk Mengatasi Feroresonansi pada Incoming 20 kV GIS Tandes
Directory of Open Access Journals (Sweden)
Satria Seventino Simamora
2015-12-01
Full Text Available Pada studi ini, dilakukan simulasi pemasangan damping reaktor sebagai salah satu teknik mitigasi feroresonansi dengan menggunakan ATP Draw. Damping reaktor sebagai teknik mitigasi feroresonansi menggunakan elemen resistor yang dipasang di sisi primer transformer. Hasil dari simulasi pemasangan damping reaktor yang diperoleh berupa respon arus dan respon tegangan yang berubah terhadap waktu yang menunjukkan apakah feroresonansi dapat diredam atau tidak. Dari hasil simulasi pemasangan damping reaktor pada studi ini diperoleh bahwa feroresonansi dapat diredam dengan pemasangan nilai damping yang tepat. Sehingga dalam studi ini akan dibahas mengenai sejauh mana keefektifan dari pemasangan damping untuk meredam feroresonansi.
Direct measurement of the damping of toroidicity induced Alfven eigenmodes
International Nuclear Information System (INIS)
Fasoli, A.; Lister, J.B.; Moret, J.M.; Lavanchy, P.; Marmillod, P.; Sharapov, S.; Borba, D.; Bosia, G.; Campbell, D.J.; Dobbing, J.A.; Gormezano, C.; Jacquinot, J.; Santagiustina, A.
1995-01-01
This paper presents the first direct experimental measurements of the damping of toroidicity induced Alfven eigenmodes (TAE), carried out in the JET tokamak. These measurements were obtained during the first experiments to drive these modes with antennas external to a tokamak plasma. Different regimes corresponding to different dominant TAE absorption mechanisms with a wide range of damping rates, 10 -3 ≤γ/ω≤10 -1 , have been identified in ohmically heated plasma discharges using this new active diagnostic for Alfven eigenmodes. (author) 5 figs., tabs., 25 refs
Parametric resonance induced chaos in magnetic damped driven pendulum
Energy Technology Data Exchange (ETDEWEB)
Khomeriki, Giorgi, E-mail: giokhomeriki123@gmail.com
2016-07-15
A damped driven pendulum with a magnetic driving force, appearing from a solenoid, where ac current flows is considered. The solenoid acts on the magnet, which is located at a free end of the pendulum. In this system the existence and interrelation of chaos and parametric resonance is theoretically examined. Derived analytical results are supported by numerical simulations and conducted experiments. - Highlights: • A damped magnetic pendulum is considered driven by off resonant magnetic field. • Our system is chaotic only when the conditions for parametric resonance are fulfilled. • Conducted experiments give a good agreement with theory and numerical simulations. • Calculated Lyapunov exponents are compared with parametric instability growth rates.
Research on the Multilayer Free Damping Structure Design
Meng, Jie; Sun, Dagang
2018-01-01
The aim of this paper is to put forward a design model for multilayer free damping structures. It sets up a mathematical model and deduces the formula for its structural loss factor η and analyzes the change rules of η along with the change rate of the elastic modulus ratio q1, the change rate of the loss factors of damping materials q2, and the change rate of the layer thickness ratio q3 under the condition with the layer thickness ratio h2=1,3,5,10 by software MATLAB. Based on three specifi...
Overview of collective effects in the NLC main damping rings
International Nuclear Information System (INIS)
Wolski, A.; Santis, S. de
2002-01-01
The present design for the NLC Main Damping Rings (MDRs) meets the specifications for acceptance and extracted emittance, in the limit of zero current. However, the relatively large bunch charge and moderate energy mean that a variety of collective effects can impact the beam dynamics, leading to loss of stability or increase of equilibrium emittance. These effects include intrabeam scattering, impedance from numerous sources, fast ion instability, and (in the positron ring) electron cloud. In this note, we survey the expected impact on damping ring performance from each of a number of collective effects, and discuss the priorities for future studies in this area
Investigation of Landau-damping effects on shock formation
DEFF Research Database (Denmark)
Andersen, H.K.; D'Angelo, N.; Michelsen, Poul
1967-01-01
Landau damping in plasmas of equal ion and electron temperatures (alkali plasmas) may prevent the formation of a shock. Shocks are produced when the ratio Te/Ti is increased to about 8 or so by cooling the ions through i-n collisions.......Landau damping in plasmas of equal ion and electron temperatures (alkali plasmas) may prevent the formation of a shock. Shocks are produced when the ratio Te/Ti is increased to about 8 or so by cooling the ions through i-n collisions....
Collision damping of collective state in an infinite system
International Nuclear Information System (INIS)
Ando, K.; Kyoto Univ.
1983-01-01
On the basis of the second-order perturbation formula, a transparent derivation is given for the damping width of zero sound at absolute zero temperature (T=0). It is shown that the present result is in agreement with Landau's suggestion that the width at T=0 can be obtained by multiplying the classical result by energy ω- and T-dependent factor 1+(ω/2πT) 2 with T→0. An attempt is made at expressing the interference effect between particle and hole contributions to giant resonance widths in a form appealing to physical intuition, with a view toward macroscopic understanding of the damping of giant resonance states. (author)
Bunch length measurements in the SLC damping ring
International Nuclear Information System (INIS)
Decker, F.J.; Limberg, T.; Minty, M.; Ross, M.
1993-05-01
The synchrotron light of the SLC damping ring was used to measure the bunch length with a streak camera at different times in the damping cycle. There are bunch length oscillations after injection, different equilibrium length during the cycle due to rf manipulations to avoid microwave instability oscillations, and just before extraction there is a longitudinal phase space rotation (bunch muncher) to shorten the bunch length. Measurements under these different conditions are presented and compared with BPM pulse height signals. Calibration and adjustment issues and the connection of the streak camera to the SLC control system are also discussed
Damping beam displacements through phase mixing: an illustrative model
International Nuclear Information System (INIS)
Barletta, W.A.; Briggs, R.J.
1983-01-01
We develop a simple model of a beam transported in a hard wall channel (an idealized very-high-order magnetic-multipole channel). The extremely anharmonic nature of the potential leads to damping of coherent transverse displacements of the beam via phase mixing. For the case of small uniform displacements of the beam we can write down by inspection the analytical form of the motion of the beam centroid. The same technique allows us to evaluate the effects of focussing and scattering elements in the transport channel upon the damping of the transverse motion of the beam
Black, Carrie; Germaschewski, Kai; Bhattacharjee, Amitava; Ng, C. S.
2013-01-01
It has been demonstrated that in the presence of weak collisions, described by the Lenard-Bernstein collision operator, the Landau-damped solutions become true eigenmodes of the system and constitute a complete set. We present numerical results from an Eulerian Vlasov code that incorporates the Lenard-Bernstein collision operator. The effect of the collisions on the numerical recursion phenomenon seen in Vlasov codes is discussed. The code is benchmarked against exact linear eigenmode solutions in the presence of weak collisions, and a spectrum of Landau-damped solutions is determined within the limits of numerical resolution. Tests of the orthogonality and the completeness relation are presented.
Alaoui, Meriem; Holman, Gordon D.
2017-12-01
Hard X-ray (HXR) spectral breaks are explained in terms of a one-dimensional model with a cospatial return current. We study 19 flares observed by the Ramaty High Energy Solar Spectroscopic Imager with strong spectral breaks at energies around a few deka-keV, which cannot be explained by isotropic albedo or non-uniform ionization alone. We identify these breaks at the HXR peak time, but we obtain 8 s cadence spectra of the entire impulsive phase. Electrons with an initially power-law distribution and a sharp low-energy cutoff lose energy through return-current losses until they reach the thick target, where they lose their remaining energy through collisions. Our main results are as follows. (1) The return-current collisional thick-target model provides acceptable fits for spectra with strong breaks. (2) Limits on the plasma resistivity are derived from the fitted potential drop and deduced electron-beam flux density, assuming the return current is a drift current in the ambient plasma. These resistivities are typically 2–3 orders of magnitude higher than the Spitzer resistivity at the fitted temperature, and provide a test for the adequacy of classical resistivity and the stability of the return current. (3) Using the upper limit of the low-energy cutoff, the return current is always stable to the generation of ion-acoustic and electrostatic ion-cyclotron instabilities when the electron temperature is nine times lower than the ion temperature. (4) In most cases, the return current is most likely primarily carried by runaway electrons from the tail of the thermal distribution rather than by the bulk drifting thermal electrons. For these cases, anomalous resistivity is not required.
Genesis of post-collisional calc-alkaline and alkaline granitoids in Qiman Tagh, East Kunlun, China
Yu, Miao; Feng, Chengyou; Zhao, Yiming; Li, Daxin
2015-12-01
The post-collisional magmatism of Qiman Tagh is characterized by the intrusion of voluminous intermediate to felsic granitoids, including syenogranite, monzogranite, granodiorite, tonalite and diorite. The granitoids can be divided into two magmatic suites: Calc-alkaline (CA) and alkaline (Alk), which were emplaced from ~ 236 Ma to ~ 204 Ma. The CA suite contains metaluminous granodiorites and monzogranites. Typical Qiman Tagh CA granodiorites show moderately fractionated REE patterns ((La/Yb)N = 4.35-25.11) with significant negative Eu anomalies (Eu/Eu* = 0.54-1.34), and the primitive mantle-normalized spidergrams show strong depletion of Nb and Sr. The Qiman Tagh CA monzogranites show similar fractionated REE patterns ((La/Yb)N = 2.70-13.5) with less prominent negative Eu anomalies, and the chondrite-normalized spidergrams show strongly depleted Ba, Nb and Sr. The Alk suite, including syenogranite, is highly potassic (K2O/Na2O = 1.09-3.56) and peraluminous (A/CNK = 0.91-1.06). Compared to typical Qiman Tagh CA granodiorites, the Qiman Tagh Alk granitoids can be distinguished by their higher Rb, Nb, Ga/Al, FeO*/MgO, Y/Sr and Rb/Sr, as well as their lower Mg#, MgO, CaO, Al2O3, Sr, Co, V, Eu/Eu*, Ba/Nb, La/Nb, Ba/La and Ce/Nb. The Qiman Tagh CA rocks were most likely to be derived from the partial melting of garnet-amphibolite-facies rocks in the lower crust, leaving behind anhydrous granulite-facies rocks with plagioclase and garnet in the residue. The Alk rocks may have formed by the continued partial melting of granulite-facies rocks at elevated temperatures (> 830 °C).
Strongly Correlated Topological Insulators
2016-02-03
Strongly Correlated Topological Insulators In the past year, the grant was used for work in the field of topological phases, with emphasis on finding...surface of topological insulators. In the past 3 years, we have started a new direction, that of fractional topological insulators. These are materials...in which a topologically nontrivial quasi-flat band is fractionally filled and then subject to strong interactions. The views, opinions and/or
Isenberg, James
2017-01-01
The Hawking-Penrose theorems tell us that solutions of Einstein's equations are generally singular, in the sense of the incompleteness of causal geodesics (the paths of physical observers). These singularities might be marked by the blowup of curvature and therefore crushing tidal forces, or by the breakdown of physical determinism. Penrose has conjectured (in his `Strong Cosmic Censorship Conjecture`) that it is generically unbounded curvature that causes singularities, rather than causal breakdown. The verification that ``AVTD behavior'' (marked by the domination of time derivatives over space derivatives) is generically present in a family of solutions has proven to be a useful tool for studying model versions of Strong Cosmic Censorship in that family. I discuss some of the history of Strong Cosmic Censorship, and then discuss what is known about AVTD behavior and Strong Cosmic Censorship in families of solutions defined by varying degrees of isometry, and discuss recent results which we believe will extend this knowledge and provide new support for Strong Cosmic Censorship. I also comment on some of the recent work on ``Weak Null Singularities'', and how this relates to Strong Cosmic Censorship.
Strong plasma shock structures based on the Navier--Stokes equations
International Nuclear Information System (INIS)
Abe, K.
1975-01-01
The structure of a plasma collisional shock wave is examined on the basis of the Navier--Stokes equations and simultaneously on the basis of the Fokker--Planck equation. The resultant structures are compared to check the validity of the Navier--Stokes equations applied to the structures of strong shock waves. The Navier--Stokes equations give quite correct structures for weak shock waves. For the strong shock waves, the detailed structures obtained from the Navier--Stokes equations differ from the results of the Fokker--Planck equation, but the shock thicknesses of the two shock waves are in relatively close agreement
Relation between tidal damping and wave celerity in estuaries
Savenije, H.H.G.; Veling, E.J.M.
2005-01-01
Observations in estuaries indicate that an amplified tidal wave moves considerably faster than is indicated by the classical equation for wave propagation. Similarly, the celerity of propagation is lower if the tidal wave is damped. This phenomenon is clearly observed in the Schelde estuary (located
Exploring damping characteristics of composite tower of cable ...
Indian Academy of Sciences (India)
Two approaches are considered to define and investigate dynamic characteristics of a composite tower of cable-stayed bridges: The first approach makes use of a simplified approximation of two lumped masses to investigate the structure irregularity effects including damping of different material, mass ratio, frequency ratio ...
Shockwave damping : field tests on the A270 in 2011
Netten, B.D.; Broek, T.H.A. van den; Koenders, E.
2011-01-01
A novel approach is developed and tested for damping and resolving shockwaves. The approach is based on close cooperation between road side units and equipped vehicles. Road side units detect the shockwave within a few seconds, and then broadcast a dynamic speed limit to reduce inflow and increase
Synchronization of Forced damped Pendulum via Active Control ...
African Journals Online (AJOL)
In this paper active controllers are designed to synchronize two identical forced damped pendula. The performance of the controllers in the synchronization of the chaotic dynamics of the two pendula, resulting from different initial conditions, is investigated numerically and found to be effective. Transition from ...
Mimicking an amplitude damping channel for Laguerre Gaussian Modes
CSIR Research Space (South Africa)
Dudley, Angela L
2010-10-01
Full Text Available amplitude damping channel for single photons, given by Eq. 1, is verified by means of classical light carrying OAM. The evolution of the classical electric field in the interferometer can be described similarly to Eq. 1. Therefore, by measuring the power...
Uniform stability of damped nonlinear vibrations of an elastic string
Indian Academy of Sciences (India)
Here we are concerned about uniform stability of damped nonlinear transverse vibrations of an elastic string fixed at its two ends. The vibrations governed by nonlinear integro-differential equation of Kirchoff type, is shown to possess energy uniformly bounded by exponentially decaying function of time. The result is ...
Damping properties of epoxy-based composite embedded with sol ...
Indian Academy of Sciences (India)
Piezoelectric materials are a class of useful damping materials, with which the vibra- tion energy is changed into electric energy due to the piezo- electric effect and the electric energy is dissipated as thermal energy through an external electric resistance (Sun and. Huang 2001; Edery-Azulay and Abramovich 2006; Erturk.
Temperature dependent damping studies of Ni–Mn–Ga polymer ...
Indian Academy of Sciences (India)
Administrator
Bull. Mater. Sci., Vol. 34, No. 4, July 2011, pp. 739–743. © Indian Academy of Sciences. 739. Temperature dependent damping studies of Ni–Mn–Ga polymer composites ... martensite transformation (Ullakko et al 1996; Mullner and Ullakko 1998 ... on twin boundaries (Kokorin et al 1996; Segui et al 2004;. Vijay Kumar ...
Quantitative Analysis and Design of a Rudder Roll Damping Controller
DEFF Research Database (Denmark)
Hearns, G.; Blanke, M.
1998-01-01
A rudder roll damping controller is designed using Quantitative feedback theory to be robust for changes in the ships metacentric height. The analytical constraint due to the non-minimum phase behaviour of the rudder to roll is analysed using the Poisson Integral Formula and it is shown how...
High Frequency Longitudinal Damped Vibrations of a Cylindrical Ultrasonic Transducer
Directory of Open Access Journals (Sweden)
Mihai Valentin Predoi
2014-01-01
Full Text Available Ultrasonic piezoelectric transducers used in classical nondestructive testing are producing in general longitudinal vibrations in the MHz range. A simple mechanical model of these transducers would be very useful for wave propagation numerical simulations, avoiding the existing complicated models in which the real components of the transducer are modeled by finite elements. The classical model for longitudinal vibrations is not adequate because the generated longitudinal wave is not dispersive, the velocity being the same at any frequency. We have adopted the Rayleigh-Bishop model, which avoids these limitations, even if it is not converging to the first but to the second exact longitudinal mode in an elastic rod, as obtained from the complicated Pochhammer-Chree equations. Since real transducers have significant vibrations damping, we have introduced a damping term in the Rayleigh-Bishop model, increasing the imaginary part and keeping almost identical real part of the wavenumber. Common transducers produce amplitude modulated signals, completely attenuated after several periods. This can be modeled by two close frequencies, producing a “beat” phenomenon, superposed on the high damping. For this reason, we introduce a two-rod Rayleigh-Bishop model with damping. Agreement with measured normal velocity on the transducer free surface is encouraging for continuation of the research.
Crumb Rubber Recycling in Enhancing Damping Properties of Concrete
Sugapriya, P.; Ramkrishnan, R.
2018-02-01
Damping plays a major role in the design of roadside structures that gets affected due to vibrations transmitted from moving traffic. In this study, fine aggregates were partially replaced with crumb rubber in concrete, at varying percentages of 5, 10, 15 and 20% by weight. Three different sets of concrete, mixed with crumb rubber were prepared using raw rubber, treated rubber and treated rubber with partial replacement of cement. Cement was partially replaced with Ultra-Fine Ground Granulated Blast furnace Slag (UFGGBS) for this study. Samples were cast, cured and tested for various properties on the 7th and 28th day. The damping ratio and frequency of the peak value from a number of waves in rubber incorporated beams were found out using a FFT Analyser along with its Strength, Damping and Sorptivity characteristics. SEM analysis was conducted to analyse the micro structural bonding between rubber and concrete. The mode shapes of pavement slabs were modelled and analysed using a FEM tool, ANSYS. From the results, the behaviour of the three sets of rubberized concrete were compared and analysed, and an optimum percentage for crumb rubber and UFGGBS was proposed to achieve best possible damping without compromising the strength properties.
Damping analysis of cylindrical composite structures with enhanced viscoelastic properties
DEFF Research Database (Denmark)
Kliem, Mathias; Høgsberg, Jan Becker; Vanwalleghem, Joachim
2018-01-01
is forced to deform in shear mode. Thus, the vibration energy is dissipated as low grade frictional heat. This paper documents the eﬃciency of passive constrained layer damping treatments for low frequency vibrations of cylindrical composite specimens made of glass ﬁbre-reinforced plastics. Diﬀerent cross...
Frequency and temperature dependence of high damping elastomers
International Nuclear Information System (INIS)
Kulak, R.F.; Hughes, T.H.
1993-01-01
High damping steel-laminated elastomeric seismic isolation bearings are one of the preferred devices for isolating large buildings and structures. In the US, the current reference design for the Advanced Liquid Metal Reactor (ALMR) uses laminated bearings for seismic isolation. These bearings are constructed from alternating layers of high damping rubber and steel plates. They are typically designed for shear strains between 50 and 100% and are expected to sustain two to three times these levels for beyond design basis loading conditions. Elastomeric bearings are currently designed to provide a system frequency between 0.4 and 0.8 Hz and expected to operate between -20 and 40 degrees Centigrade. To assure proper performance of isolation bearings, it is necessary to characterize the elastomer's response under expected variations of frequency and temperature. The dynamic response of the elastomer must be characterized within the frequency range that spans the bearing acceptance test frequency, which may be as low as 0.005 Hz, and the design frequency. Similarly, the variation in mechanical characteristics of the elastomer must be determined over the design temperature range, which is between -20 and 40 degrees Centigrade. This paper reports on (1) the capabilities of a testing facility at ANL for testing candidate elastomers, (2) the variation with frequency and temperature of the stiffness and damping of one candidate elastomer, and (3) the effect of these variations on bearing acceptance testing criteria and on the choice of bearing design values for stiffness and damping
The forced harmonic oscillator with damping and thermal effects
International Nuclear Information System (INIS)
Menezes Franca, H. de; Thomaz, M.T.
1984-01-01
Nonperturbative quantum mechanical solutions of the forced harmonic oscillator with radiation reaction damping are obtained from previous analysis based on Stochastic Electrodynamics. The transition to excited states is shown to be to coherent states which follow the classical trajectory. The quantum Wigner distribution in phase space is constructed. All the results are extended to finite temperatures. (Author) [pt
Various types of dry friction characteristics for vibration damping
Czech Academy of Sciences Publication Activity Database
Půst, Ladislav; Pešek, Luděk; Radolfová, Alena
2011-01-01
Roč. 18, 3/4 (2011), s. 203-224 ISSN 1802-1484 R&D Projects: GA ČR GA101/09/1166 Institutional research plan: CEZ:AV0Z20760514 Keywords : dry friction * stick – slip motion * modified Coulomb law * equivalent damping coefficient Subject RIV: BI - Acoustics
Gravitational Radiation Damping and Evolution of the Orbit of ...
Indian Academy of Sciences (India)
Abstract. The influence of the gravitational radiation damping on the evolution of the orbital elements of compact binary stars is examined by using the method of perturbation. The perturbation equations with the true anomaly as an independent variable are given. This effect results in both the secular and periodic variation ...
Statistical mechanics of quantum one-dimensional damped harmonic oscillator
International Nuclear Information System (INIS)
Borges, E.N.M.; Borges, O.N.; Ribeiro, L.A.A.
1985-01-01
We calculate the thermal correlation functions of the one-dimensional damped harmonic oscillator in contact with a reservoir, in an exact form by applying Green's function method. In this way the thermal fluctuations are incorporated in the Caldirola-Kanai Hamiltonian
Model independent control of lightly damped noise/vibration systems.
Yuan, Jing
2008-07-01
Feedforward control is a popular strategy of active noise/vibration control. In well-damped noise/vibration systems, path transfer functions from actuators to sensors can be modeled by finite impulse response (FIR) filters with negligible errors. It is possible to implement noninvasive model independent feedforward control by a recently proposed method called orthogonal adaptation. In lightly damped noise/vibration systems, however, path transfer functions have infinite impulse responses (IIRs) that cause difficulties in design and implementation of broadband feedforward controllers. A major source of difficulties is model error if IIR path transfer functions are approximated by FIR filters. In general, active control performance deteriorates as model error increases. In this study, a new method is proposed to design and implement model independent feedforward controllers for broadband in lightly damped noise/vibration systems. It is shown analytically that the proposed method is able to drive the convergence of a noninvasive model independent feedforward controller to improve broadband control in lightly damped noise/vibration systems. The controller is optimized in the minimum H2 norm sense. Experiment results are presented to verify the analytical results.
Quantitative analysis of the thermal damping of coherent axion oscillations
International Nuclear Information System (INIS)
Turner, M.S.
1985-01-01
Unruh and Wald have recently discussed a new mechanism for damping coherent axion oscillations, ''thermal damping,'' which occurs due to the temperature dependence of the axion mass and neutrino viscosity. We investigate the effect quantitatively and find that the present energy density in axions can be written as rho/sub a/ = rho/sub a0//(1+J/sub UW/), where rho/sub a/0 is what the axion energy density would be in the absence of the thermal-damping effect and J/sub UW/ is an integral whose integrand depends upon (dm/sub a//dT) 2 . As a function of f(equivalentPeccei-Quinn symmetry-breaking scale) J/sub UW/ achieves its maximum value for f/sub PQ/approx. =3 x 10 12 GeV; unless the axion mass turn-on is very sudden, Vertical Bar(T/m/sub a/)(dm/sub a//dT)Vertical Bar>>1, J/sub UW/ is <<1, implying that this damping mechanism is not significant
Spatial damping of propagating sausage waves in coronal cylinders
Guo, Ming-Zhe; Chen, Shao-Xia; Li, Bo; Xia, Li-Dong; Yu, Hui
2015-09-01
Context. Sausage modes are important in coronal seismology. Spatially damped propagating sausage waves were recently observed in the solar atmosphere. Aims: We examine how wave leakage influences the spatial damping of sausage waves propagating along coronal structures modeled by a cylindrical density enhancement embedded in a uniform magnetic field. Methods: Working in the framework of cold magnetohydrodynamics, we solve the dispersion relation (DR) governing sausage waves for complex-valued, longitudinal wavenumber k at given real angular frequencies ω. For validation purposes, we also provide analytical approximations to the DR in the low-frequency limit and in the vicinity of ωc, the critical angular frequency separating trapped from leaky waves. Results: In contrast to the standing case, propagating sausage waves are allowed for ω much lower than ωc. However, while able to direct their energy upward, these low-frequency waves are subject to substantial spatial attenuation. The spatial damping length shows little dependence on the density contrast between the cylinder and its surroundings, and depends only weakly on frequency. This spatial damping length is of the order of the cylinder radius for ω ≲ 1.5vAi/a, where a and vAi are the cylinder radius and the Alfvén speed in the cylinder, respectively. Conclusions: If a coronal cylinder is perturbed by symmetric boundary drivers (e.g., granular motions) with a broadband spectrum, wave leakage efficiently filters out the low-frequency components.
Vibrations of stretched damped beams under non-ideal boundary ...
Indian Academy of Sciences (India)
A simply supported damped Euler–Bernoulli beam with immovable end conditions are considered. The concept of non-ideal boundary conditions is applied to the beam problem. In accordance, the boundaries are assumed to allow small deﬂections and moments. Approximate analytical solution of the problem is found ...
Squeeze-film damping characteristics of cantilever microresonators ...
African Journals Online (AJOL)
The quality factors of the system are also obtained numerically using the coupled field FE analysis software ANSYS. A comparison of the results up to the pull-in instability shows excellent agreement for damping characteristics obtained by both the semi-analytical and FE methods. The effects of large DC bias voltages on ...
Damping of double wall panels including a viscothermal air layer
Basten, T.G.H.; Stainhaouer, G.; Bakamidis, S.; Charalabopoulou, F.
2001-01-01
This paper deals with the dynamic behaviour of double wall panels, with emphasis on damping and sound radiation. It will be shown that a narrow air layer separating the two plates of a panel significantly alters the mentioned quantities by its viscothermal properties. Numerical and experimental
External Coulomb-Friction Damping For Hydrostatic Bearings
Buckmann, Paul S.
1992-01-01
External friction device damps vibrations of shaft and hydrostatic ring bearing in which it turns. Does not rely on wear-prone facing surfaces. Hydrostatic bearing ring clamped in radially flexing support by side plates clamped against radial surfaces by spring-loaded bolts. Plates provide friction against radial motions of shaft.
Vibrations of turbine blades bundles model with rubber damping elements
Czech Academy of Sciences Publication Activity Database
Půst, Ladislav; Pešek, Luděk
2014-01-01
Roč. 21, č. 1 (2014), s. 45-52 ISSN 1802-1484 R&D Projects: GA ČR GA101/09/1166 Institutional support: RVO:61388998 Keywords : mathematical model * bundle of five blades * rubber damping elements * eigenmodes Subject RIV: BI - Acoustics http://www.engineeringmechanics.cz/obsahy.html?R=21&C=1
Three-humped fission barrier transmission including vibrational damping
International Nuclear Information System (INIS)
Calabretta, L.; Del Zoppo, A.; Ingrao, G.
1978-01-01
The total penetrability through a three-humped fission barrier including vibrational damping is calculated by using an optical model for fission. The Bondorf's stationary probability current theory is used for transitions among class-1, class-2 and class-3 phases. A method to calculate the partial-transmission coefficients is developed
Injection and Extraction Lines for the ILC Damping Rings
International Nuclear Information System (INIS)
Reichel, Ina
2007-01-01
The current design for the injection and extraction lines into and out of the ILC Damping Rings is presented as well as the design for the abort line. Due to changes of the geometric boundary conditions by other subsystems of the ILC, a modular approach has been used to be able to respond to recurring layout changes while reusing previously designed parts
Danish Teachers' Conception of Challenging Behaviour and DAMP/ADHD
Holst, Jesper
2008-01-01
This study examines how teachers of young children in Denmark perceived challenging behaviours in children who have characteristics consistent with Deficit in Attention, Motor Control and Perception (DAMP) or Attention Deficit/Hyperactivity Disorder (ADHD). This study was conducted in schools and kindergartens in three demographically different…