Sample records for strike dip rake

  1. Tsunamigenic Earthquakes at Along-dip Double Segmentation and Along-strike Single Segmentation near Japan

    Directory of Open Access Journals (Sweden)

    Junji Koyama


    Full Text Available A distinct difference of the earthquake activity in megathrust subduction zones is pointed out, concerning seismic segmentations in the vicinity of Japan—that is, the apparent distribution of earthquake hypocenters characterized by Along-dip Double Segmentation (ADDS and Along-strike Single Segmentation (ASSS. ADDS is double aligned seismic-segmentation of trench-ward seismic segments along the Japan Trench and island-ward seismic segments along the Pacific coast of the Japan Islands. The 2011 Tohoku-oki megathrust earthquake of Mw9.0 occurred in ADDS. In the meantime, the subduction zone along the Nankai Trough, the western part of Japan, is the source region of a multiple rupture of seismic segments by the 1707 Houei earthquake, the greatest earthquake in the history of Japan. This subduction zone is narrow under the Japan Islands, which is composed of single aligned seismic-segmentation side by side along the Nankai Trough, which is typical of ASSS. Looking at the world seismicity, the 1960 and 2010 Chile megathrusts, for example, occurred in ASSS, whereas the 1952 Kamchatka and the 1964 Alaska megathrusts occurred in ADDS. These megathrusts in ADDS result from the rupture of strong asperity in the trench-ward seismic segments. Since the asperity of earthquakes in ASSS is concentrated in the shallow part of subduction zones and the asperity of frequent earthquakes in ADDS is in deeper parts of the island-ward seismic segments than those of ASSS, there must be a difference in tsunami excitations due to earthquakes in ADDS and ASSS. An analysis was made in detail of tsunami and seismic excitations of earthquakes in the vicinity of Japan. Tsunami heights of ASSS earthquakes are about two times larger than those of ADDS earthquakes with the same value of seismic moment. The reason for this different tsunami excitation is also considered in relation to the seismic segmentations of ADDS and ASSS.

  2. Derivation of Strike and Dip in Sedimentary Terrain Using 3D Image Interpretation Based on Airborne LiDAR Data

    Directory of Open Access Journals (Sweden)

    Chih-Hsiang Yeh


    Full Text Available Traditional geological mapping may be hindered by rough terrain and dense vegetation resulting in obscured geological details. The advent of airborne Light Detection and Ranging (LiDAR provides a very precise three-dimensional (3D digital terrain model (DTM. However, its full potential in complementing traditional geological mapping remains to be explored using 3D rendering techniques. This study uses two types of 3D images which differ in imaging principles to further explore the finer details of sedimentary terrain. Our purposes are to demonstrate detailed geological mapping with 3D rendering techniques, to generate LiDAR-derived 3D strata boundaries that are advantageous in generating 2D geological maps and cross sections, and to develop a new practice in deriving the strike and dip of bedding with LiDAR data using an example from the north bank of the Keelung River in northern Taiwan. We propose a geological mapping practice that improves efficiency and meets a high-precision mapping standard with up to 2 m resolution using airborne LiDAR data. Through field verification and assessment, LiDAR data manipulation with relevant 3D visualization is shown to be an effective approach in improving the details of existing geological maps, specifically in sedimentary terrain.

  3. Rake muudab majad soojapidavaks

    Index Scriptorium Estoniae


    Ilmunud ka: Postimees : na russkom jazõke : v duhhe innovatsii 24. juuli lk. 3. Ettevõtluse Arendamise Sihtasutuse kaasfinantseerimise toel välja töötatud AS Rake fassaadikattesüsteem tähistab tänavu kümnendat aastapäeva, tõuke tehnoloogia väljatöötamiseks andis Eesti liitumine Euroopa Liiduga. Lisa: Rake AS

  4. Rake task management essentials

    CERN Document Server

    Koleshko, Andrey


    A step-by-step and interactive approach explaining the Rake essentials along with code examples and advanced features. If you are a developer who is acquainted with the Ruby language and want to speed up writing the code concerned with files, then this book is for you. To start reading this book, basic Ruby knowledge is required; however, a huge amount of experience with the language is not necessary.

  5. LOFT DTT rake pin stress analysis

    Energy Technology Data Exchange (ETDEWEB)

    Mosby, W.R.


    A stress analysis of the 3/8-inch and 1/4-inch pins which hold the rake assembly to the flange was performed and shows stresses to be lower than the Class 1 allowables of the ASME Boiler and Pressure Vessel Code. The alternating pin stresses were found to be below the endurance limit and fatigue failure will not occur. The rake assembly was assumed to be loaded by steady drag and lift forces and alternating vortex shedding forces.

  6. Study on stability of rake teeth inserting soil of chain rake type mulching film recovery machine based on Adams (United States)

    Guo, Wensong; Jian, Jianming; San, Yunlong; Lui, Rui; Li, Gang; Hou, Shulin


    Traditional rake type mulching film recycling machine has the problem of difficulty in unloading and packing film, poor continuity of the work. In order to solve such problems, this paper designs a kind of chain rake type mulching film recycling machine which can realize continuous raking film, collecting film, transporting film, shaking off soil, unloading film. Rake teeth is the basic part of chain rake mulching recycling machine. The stability of rake teeth's inserting soil is an important factor to ensure recovery efficiency of the plastic film recovery. By virtual prototype simulation, this paper study the influence of different factors on the stability of rake teeth inserting soil. The results are as follows: The speed of chain rake has no significant effect on the stability of rake teeth inserting soil; Reducing resistance of rake teeth in the process of working, is conducive to improve the stability of rake teeth inserting soil; Appropriate increasing elastic modulus of chain rake, is helpful to enhance the stability of rake teeth inserting soil.

  7. Does raking basal duff affect tree growth rates or mortality? (United States)

    Erin Noonan-Wright; Sharon M. Hood; Danny R. Cluck


    Mortality and reduced growth rates due to raking accumulated basal duff were evaluated for old, large-diameter ponderosa and Jeffrey pine trees on the Lassen National Forest, California. No fire treatments were included to isolate the effect of raking from fire. Trees were monitored annually for 5 years after the raking treatment for mortality and then cored to measure...

  8. Influence of Physical Raking and Biological Process in the Mud ...

    African Journals Online (AJOL)

    Collected sediment (100 g) was dispensed in a glass beaker and treated with radioactive 32P after reaction with CaCO3. Each beaker filled with 250 ml tap water. Four different treatments: physical raking once (RO), repeated raking (RR), bacteria (Bacillus, 167 X 102 ml-1) inoculum (BI) and bacteria inoculum (Bacillus, 167 ...

  9. Further Development of Rotating Rake Mode Measurement Data Analysis (United States)

    Dahl, Milo D.; Hixon, Ray; Sutliff, Daniel L.


    The Rotating Rake mode measurement system was designed to measure acoustic duct modes generated by a fan stage. After analysis of the measured data, the mode amplitudes and phases were quantified. For low-speed fans within axisymmetric ducts, mode power levels computed from rotating rake measured data would agree with the far-field power levels on a tone by tone basis. However, this agreement required that the sound from the noise sources within the duct propagated outward from the duct exit without reflection at the exit and previous studies suggested conditions could exist where significant reflections could occur. To directly measure the modes propagating in both directions within a duct, a second rake was mounted to the rotating system with an offset in both the axial and the azimuthal directions. The rotating rake data analysis technique was extended to include the data measured by the second rake. The analysis resulted in a set of circumferential mode levels at each of the two rake microphone locations. Radial basis functions were then least-squares fit to this data to obtain the radial mode amplitudes for the modes propagating in both directions within the duct. The fit equations were also modified to allow evanescent mode amplitudes to be computed. This extension of the rotating rake data analysis technique was tested using simulated data, numerical code produced data, and preliminary in-duct measured data.

  10. Bottom Raking Damage to High-Speed Craft

    DEFF Research Database (Denmark)

    Simonsen, Bo Cerup


    certain similarities. Thus, damage statistics for one ship type can be scaled to another ship type.The result of a raking damage calculation is sensitive to various uncertain parameters, such as the impact velocity and the rock height and shape. Conveniently, the paper shows that the damage scaling factor......This paper presents a comparative study of the raking damage to high speed craft (HSC) and conventional ships. The analysis is based on a detailed theoretical model for the raking resistance of an assembled ship bottom structure and on the idea that the impact conditions for various ship types have...

  11. Design and flight testing of a nullable compressor face rake (United States)

    Holzman, J. K.; Payne, G. A.


    A compressor face rake with an internal valve arrangement to permit nulling was designed, constructed, and tested in the laboratory and in flight at the NASA Flight Research Center. When actuated by the pilot in flight, the nullable rake allowed the transducer zero shifts to be determined and then subsequently removed during data reduction. Design details, the fabrication technique, the principle of operation, brief descriptions of associated digital zero-correction programs and the qualification tests, and test results are included. Sample flight data show that the zero shifts were large and unpredictable but could be measured in flight with the rake. The rake functioned reliably and as expected during 25 hours of operation under flight environmental conditions and temperatures from 230 K (-46 F) to greater than 430 K (314 F). The rake was nulled approximately 1000 times. The in-flight zero-shift measurement technique, as well as the rake design, was successful and should be useful in future applications, particularly where accurate measurements of both steady-state and dynamic pressures are required under adverse environmental conditions.

  12. Effect of Rake Angle During Machining of Micro Grooves on Electroless Nickel Plated Die Materials

    International Nuclear Information System (INIS)

    Rezaur Rahman, K.M.; Rahman, M.


    This study attempts to evaluate the performance of two single crystal diamond tools with different rake angle (0 0 and -15 0 ) during micro grooving on electroless nickel plated die materials. It was found that the 0 0 rake diamond tool has superior performance compared to the -15 0 rake angle tool. The negative rake tool experienced very high thrust force, and severe chipping on the flank face was evident after a short cutting distance of 3.13 km. On the other hand, the 0 0 rake tool machined satisfactorily up to 50 km without any significant tool wear. While machining with the -15 0 rake tool, significant change in surface roughness with spindle speed was observed compared to the 0 0 rake tool. With increasing infeed rate variation in surface roughness was evident only with the -15 0 rake tool. Steep change in roughness with machining distance was also observed while machining with the negative rake tool. (authors)

  13. Source characteristics of the 2015 Mw6.5 Lefkada, Greece, strike-slip earthquake (United States)

    Melgar, Diego; Ganas, Athanassios; Geng, Jianghui; Liang, Cunren; Fielding, Eric J.; Kassaras, Ioannis


    We present a kinematic slip model from the inversion of 1 Hz GPS, strong motion, and interferometric synthetic aperture radar (InSAR) data for the 2015 Mw6.5 Lefkada, Greece, earthquake. We will show that most of the slip during this event is updip of the hypocenter (10.7 km depth) with substantial slip (>0.5 m) between 5 km depth and the surface. The peak slip is 1.6 m, and the inverted rake angles show predominantly strike-slip motion. Slip concentrates mostly to the south of the hypocenter, and the source time function indicates a total duration of 17 s with peak moment rate at 6 s. We will show that a 65° dipping geometry is the most plausible due to a lack of polarity reversals in the InSAR data and good agreement with Coulomb stress modeling, aftershock locations, and regional moment tensors. We also note that there was an 20 cm peak-to-peak tsunami observed at one tide gauge station 300 km away from the earthquake. We will discuss tsunami modeling results and study the possible source of the amplitude discrepancy between the modeled and the observed data at far-field tide gauges.

  14. Reproductive ecology of American Oystercatchers nesting on shell rakes (United States)

    Jodice, Patrick G.R.; Thibault, Janet M.; Collins, S.A.; Spinks, Mark D.; Sanders, Felicia J.


    Degradation of nesting habitat for coastal birds has led to the use of nontraditional nesting habitat. The American Oystercatcher (Haematopus palliatus) is listed as a "Species of High Concern'' by the U. S. Shorebird Conservation Plan and is declining in the southern portion of its U. S. breeding range, where ~ 50% of breeding oystercatchers nest on shell substrate instead of beachfront habitat. We measured daily survival rates during incubation and chick rearing in shell rake habitats over five breeding seasons in the Cape Romain region of South Carolina, USA. Of 354 nesting attempts monitored, 16.1% hatched at least one egg. During incubation, daily survival rate was 0.938, corresponding to 22.8% success to hatching (nest success). For broods, daily survival was 0.991, or 74.0% success from hatching to fledging. Productivity in the Cape Romain region is primarily being lost during the incubation phase, when nests are exposed to overwash and predation. Mobile chicks may, however, be able to avoid flood events or predators by relocating to higher or more protected portions of a shell rake. Based on comparative data for American Oystercatchers from elsewhere in their range, it does not appear that shell rakes in the Cape Romain region are inferior breeding habitat. Our data suggest that conservation actions targeting nest and chick loss from flooding and predation have the greatest opportunity to enhance reproductive success in this core breeding area, and that an assessment of the availability, structure, avian use, and protection status of shell rakes is warranted.

  15. Multipurpose Rotating Rake Arrays for Integrated Inlet and Fan Stage Performance Measurement (United States)

    Wolter, John D.


    Low-pressure-ratio fan stage performance measurement requires precise measurement of conditions upstream and downstream of the fan stage. This presentation will discuss the rotating rake arrays used for the recent Boundary Layer Ingesting Inlet-Distortion-Tolerant Fan experiment in the NASA Glenn 8 by 6 foot wind tunnel. To achieve precise measurements, simulations of the rake sampling from pre-test CFD (Computerized Fluid Dynamics) solutions were used to optimize the number and locations of rake instruments.

  16. The evaluation of a rake method to quantify submersed vegetation in the Upper Mississippi River (United States)

    Yin, Yao; Kreiling, Rebecca M.


    A long-handled, double-headed garden rake was used to collect submersed aquatic vegetation (SAV) and compared to in-boat visual inspection to record species presence at 67 individual sites. Six rake subsamples were taken at each site and a rake density rating was given to each species collected in the subsamples. Presence at the site, frequency of occurrence in the six rake samples, and additive density rating (the sum of the six rake density ratings) were quantified for each species at each site. The validity of the indices was tested against biomass data collected by clipping all remaining vegetation from the 67 sites. In the turbid water of the Mississippi River, visual inspection of SAV from boats was ineffective with only 27% of the species detected, while raking retrieved on average 70% of the total number of submersed species in the 67 sites. Presence of species at individual sites was correlated with biomass from Stuckenia pectinata, while frequency of occurrence and additive density rating were correlated with biomass for species with greater than 21 g of total biomass from all sites. The efficiency of the rake to collect biomass varied among species; only 18% of total biomass was captured via raking the site six times. Additive density rating as an index of abundance can be used to detect temporal changes in the same water body; however, cross-species comparison is not encouraged unless the efficiency of the rake has been determined for each species being compared.

  17. An Innovative Flow-Measuring Device: Thermocouple Boundary Layer Rake (United States)

    Hwang, Danny P.; Fralick, Gustave C.; Martin, Lisa C.; Wrbanek, John D.; Blaha, Charles A.


    An innovative flow-measuring device, a thermocouple boundary layer rake, was developed. The sensor detects the flow by using a thin-film thermocouple (TC) array to measure the temperature difference across a heater strip. The heater and TC arrays are microfabricated on a constant-thickness quartz strut with low heat conductivity. The device can measure the velocity profile well into the boundary layer, about 65 gm from the surface, which is almost four times closer to the surface than has been possible with the previously used total pressure tube.

  18. Ultrasonic dip seal maintenance system

    International Nuclear Information System (INIS)

    Poindexter, A.M.; Ricks, H.E.


    Disclosed is a system for removing impurities from the surfaces of liquid dip seals and for wetting the metal surfaces of liquid dip seals in nuclear components. The system comprises an ultrasonic transducer that transmits ultrasonic vibrations along an ultrasonic probe to the metal and liquid surfaces of the dip seal thereby loosening and removing those impurities

  19. Wave Height and Horizon Dip

    NARCIS (Netherlands)

    Van Der Werf, Siebren; Shokaryev, Igor


    A mariner who takes the height of the sun or a star to find his position at sea, must correct his observation for horizon dip. Throughout history, dip values have been tabulated based on the idealized assumption of a perfectly flat sea. Literature on wave height correction for dip is scarce,

  20. Pursuing Automated Classification of Historic Photographic Papers from Raking Light Photomicrographs

    NARCIS (Netherlands)

    Johnson, C Richard Jr; Messier, Paul; Sethares, William A.; Klein, Andrew G; Brown, Christopher; Do, Anh Hoang; Klausmeter, Philip; Abry, Patrice; Jaffard, Stéphane; Wendt, Herwig; Roux, Stephane; Pustelnik, Nelly; van Noord, Nanne; van der Maaten, L.J.P.; Postma, E.O.; Coddington, James; Daffner, Lee Ann; Murata, Hanako; Wilhelm, Henry; Wood, Sally; Messier, Mark


    Surface texture is a critical feature in the manufacture, marketing, and use of photographic paper. Raking light reveals texture through a stark rendering of highlights and shadows. Though close-up raking light images effectively document surface features of photographic paper, the sheer number and

  1. Longleaf pine site response to repeated fertilization and forest floor removal by raking and prescribed burning (United States)

    Kim Ludovici; Robert Eaton; Stanley Zarnoch


    Removal of forest floor litter by pine needle raking and prescribed burning is a common practice in longleaf pine (Pinus palustris Mill.) stands on Coastal Plain sites in the Southeastern United States. Repeated removal of litter by raking and the loss of surface organic matter from controlled burns can affect the...

  2. Pinestraw raking, fertilization and poultry litter amendment effects on soil physical properties for a mid-rotation loblolly pine plantation (United States)

    William B. Patterson; Michael A. Blazier; Steven L. Holtard


    Frequent pinestraw raking and removal in pine plantations has led to concerns about nutrient removal from the stand. While soil chemistry of raked stands has been studied, little attention has been placed on potential compaction from raking operations. Four treatments were applied to a 16-year-old loblolly pine plantation at the Louisiana State University AgCenter...

  3. Zirconium rutile from Apollo 16 rake sample 60615,1

    International Nuclear Information System (INIS)

    Nehru, C.E.


    A TiO 2 -rich phase containing up to 6 wt% of ZrO 2 from the Apollo 16 rake sample 60615,1 is reported and tentatively referred to as zirconium rutile. Electron microprobe analyses of the mineral and other phases present in the rock are given. The hexagonal close packed structure of rutile has all its sites occupied and when cations other than Ti are present they are in stoichiometric mixed valence solid solution. Armalcolite present in the same rock contains as much ZrO 2 as does the rutile but the ilmenite contains no zirconium. Zirconium is preferentially present in the rutile and armalcolite structures but it is absent in ilmenite. (auth.)

  4. Raking it in: the impact of enculturation on chimpanzee tool use. (United States)

    Furlong, E E; Boose, K J; Boysen, S T


    Recent evidence for different tool kits, proposed to be based upon culture-like transmission, have been observed across different chimpanzee communities across Western Africa. In light of these findings, the reported failures by seven captive juvenile chimpanzees tested with 27 tool use tasks (Povinelli 2000) seem enigmatic. Here we report successful performance by a group of nine captive, enculturated chimpanzees, and limited success by a group of six semi-enculturated chimpanzees, on two of the Povinelli tasks, the Flimsy Tool task, and the Hybrid Tool task. All chimpanzees were presented with a rake with a flimsy head and a second rake with a rigid head, either of which could be used to attempt to retrieve a food reward that was out of reach. The rigid rake was constructed such that it had the necessary functional features to permit successful retrieval, while the flimsy rake did not. Both chimpanzee groups in the present experiment selected the functional rigid tool correctly to use during the Flimsy Tool task. All animals were then presented with two "hybrid rakes" A and B, with one half of each rake head constructed from flimsy, non-functional fabric, and the other half of the head was made of wood. Food rewards were placed in front of the rigid side of Rake A and the flimsy side of Rake B. To be successful, the chimps needed to choose the rake that had the reward in front of the rigid side of the rake head. The fully enculturated animals were successful in selecting the functional rake, while the semi-enculturated subjects chose randomly between the two hybrid tools. Compared with findings from Povinelli, whose non-enculturated animals failed both tasks, our results demonstrate that chimpanzees reared under conditions of semi-enculturation could learn to discriminate correctly the necessary tool through trial-and-error during the Flimsy Tool task, but were unable to recognize the functional relationship necessary for retrieving the reward with the "hybrid

  5. Causes of falls of hangingwall over gullies adjacent to stabilizing strike pillars

    CSIR Research Space (South Africa)

    Turner, PA


    Full Text Available This report discusses the occurrence of falls of ground in strike gullies. Falls of hangingwall over strike gullies on the up-dip side of strike stabilizing pillars in longwall mining systems were investigated. Gullies were examined in both...

  6. Design and Calibration of a Flowfield Survey Rake for Inlet Flight Research (United States)

    Flynn, Darin C.; Ratnayake, Nalin A.; Frederick, Michael


    Flowfield rake was designed to quantify the flowfield for inlet research underneath NASA DFRC s F-15B airplane. Detailed loads and stress analysis performed using CFD and empirical methods to assure structural integrity. Calibration data were generated through wind tunnel testing of the rake. Calibration algorithm was developed to determine the local Mach and flow angularity at each probe. RAGE was flown November, 2008. Data is currently being analyzed.

  7. Database of Interacting Proteins (DIP) (United States)

    U.S. Department of Health & Human Services — The DIP database catalogs experimentally determined interactions between proteins. It combines information from a variety of sources to create a single, consistent...

  8. Lightning Often Strikes Twice (United States)


    Contrary to popular misconception, lightning often strikes the same place twice. Certain conditions are just ripe for a bolt of electricity to come zapping down; and a lightning strike is powerful enough to do a lot of damage wherever it hits. NASA created the Accurate Location of Lightning Strikes technology to determine the ground strike point of lightning and prevent electrical damage in the immediate vicinity of the Space Shuttle launch pads at Kennedy Space Center. The area surrounding the launch pads is enmeshed in a network of electrical wires and components, and electronic equipment is highly susceptible to lightning strike damage. The accurate knowledge of the striking point is important so that crews can determine which equipment or system needs to be retested following a strike. Accurate to within a few yards, this technology can locate a lightning strike in the perimeter of the launch pad. As an added bonus, the engineers, then knowing where the lightning struck, can adjust the variables that may be attracting the lightning, to create a zone that will be less susceptible to future strikes.

  9. Development of a Rotating Rake Array for Boundary-Layer-Ingesting Fan-Stage Measurements (United States)

    Wolter, John D.; Arend, David J.; Hirt, Stefanie M.; Gazzaniga, John A.


    The recent Boundary-Layer-Ingesting Inlet/Distortion Tolerant Fan wind tunnel experiment at NASA Glenn Research Center's 8- by 6-foot Supersonic Wind Tunnel (SWT) examined the performance of a novel inlet and fan stage that was designed to ingest the vehicle boundary layer in order to take advantage of a predicted overall propulsive efficiency benefit. A key piece of the experiment's instrumentation was a pair of rotating rake arrays located upstream and downstream of the fan stage. This paper examines the development of these rake arrays. Pre-test numerical solutions were sampled to determine placement and spacing for rake pressure and temperature probes. The effects of probe spacing and survey density on the repeatability of survey measurements was examined. These data were then used to estimate measurement uncertainty for the adiabatic efficiency.

  10. Options with Extreme Strikes

    Directory of Open Access Journals (Sweden)

    Lingjiong Zhu


    Full Text Available In this short paper, we study the asymptotics for the price of call options for very large strikes and put options for very small strikes. The stock price is assumed to follow the Black–Scholes models. We analyze European, Asian, American, Parisian and perpetual options and conclude that the tail asymptotics for these option types fall into four scenarios.

  11. Should doctors strike? (United States)

    Park, John J; Murray, Scott A


    Last year in June, British doctors went on strike for the first time since 1975. Amidst a global economic downturn and with many health systems struggling with reduced finances, around the world the issue of public health workers going on strike is a very real one. Almost all doctors will agree that we should always follow the law, but often the law is unclear or does not cover a particular case. Here we must appeal to ethical discussion. The General Medical Council, in its key guidance document for practising doctors, Good Medical Practice, claims that 'Good doctors make the care of their patients their first concern'. Is this true? And if so, how is this relevant to the issue of striking? One year on since the events, we carefully reflect and argue whether it was right for doctors to pursue strike action, and call for greater discussion of ethical issues such as the recent strikes, particularly among younger members of the profession.

  12. Receiver Function Imaging of Dipping Structures - Technique and Applications (United States)

    Liu, H.; Niu, F.


    CCP Stacking is probably the most common technique in receiver function imaging. In this technique, the conversion points are calculated and binned by assuming horizontal interfaces. However, for dipping structures such as tilted Moho or subducting slab, the horizontal interface assumption breaks down so that the image quality is low and the interfaces are misplaced. In these cases, the CCP stacking is not effective because the true conversion points do not necessarily lie in the vertical planes defined by sources and receivers and the delay time of conversion signals are varying with back azimuth. Although pre-stack time migration is an ideal technique to make correct images, the amount of qualified data it requires is often not available. An alternative way is to gather receiver functions based on conversion points and conversion times calculated from 3D velocity models with dipping structures. A dipping interface is defined by depth (d0) at a fixed geographic location, strike (Φ) and dipping angle (α). For an assumed (d0, Φ, α), we computed the conversion locations and conversion times by 3D ray tracing. We varied the depth (d0) and the dipping geometry (Φ, α) in certain range and determined the optimum value that gives the best coherent stacking signals. Note based on different tectonic setting, one or both of the dipping parameters can be fixed in the grid searching. We applied this technique to the imaging of two different geologic structures. One is a subducting slab case in western Mexico where the Rivera plate is subducting under the North American plate. Receiver functions recorded by fifty broadband seismic stations deployed under the MARS project were used to image the subducting Rivera slab. The second case is a tilted Moho lying underneath the GSN station SDV located at the southern flank of the central Venezuelan Andes. In both cases, we found substantial improvements in the receiver function images using our 3D ray tracing technique.

  13. Development of lathe tool dynamometer and finding cutting forces using negative and positive rake angle cutting tool

    International Nuclear Information System (INIS)

    Zeb, M.A.; Irfan, M.A.


    Most output parameters in machining, such as cutting forces, temperatures, strains and the work-hardening of the chip material, are directly related to the chip formation process. The characteristics of machining processes can be well understood if the forces and strains during chip formation are known. In this research a lathe tool dynamometer was used to measure cutting forces involved in machining of Steel 1045 and Aluminum 2219 T62. High Speed Steel (HSS), cutting tools with positive and negative rake angles were used. It was observed that more cutting forces are experienced by the cutting tool with positive rake angle as compared to the forces experienced by the cutting tool with negative rake angle. For steel 1045 the cutting forces using positive rake angle cutting tool were much higher. This suggested that for harder materials using a negative rake angle is more suitable for cutting. (author)

  14. ICE-DIP kicks off

    CERN Multimedia

    CERN Bulletin


    Last month, Marie Curie Actions* added a new member to its ranks: ICE-DIP (the Intel-CERN European Doctorate Industrial Program). The programme held its kick-off meeting on 18-19 February in Leixlip near Dublin, Ireland, at Intel’s premises.   Building on CERN’s long-standing relationship with Intel in the CERN openlab project, ICE-DIP brings together CERN and industrial partners, Intel and Xena Networks, to train five Early Stage ICT Researchers. These researchers will be funded by the European Commission and granted a CERN Fellow contract while enrolled in the doctoral programmes at partner universities Dublin City University and National University of Ireland Maynooth. The researchers will go on extended secondments to Intel Labs Europe locations across Europe during their three-year training programme. The primary focus of the ICE-DIP researchers will be the development of techniques for acquiring and processing data that are relevant for the trigger a...

  15. Effects of simulated historical tree litter raking on the understorey vegetation in a central European forest

    Czech Academy of Sciences Publication Activity Database

    Vild, Ondřej; Kalwij, Jesse; Hédl, Radim


    Roč. 18, č. 4 (2015), s. 569-578 ISSN 1402-2001 R&D Projects: GA AV ČR IAA600050812 EU Projects: European Commission(XE) 278065 - LONGWOOD Institutional support: RVO:67985939 Keywords : conservation management * litter raking * species diversity Subject RIV: EF - Botanics Impact factor: 2.308, year: 2015

  16. Thermocouple Rakes for Measuring Boundary Layer Flows Extremely Close to Surface (United States)

    Hwang, Danny P.; Fralick, Gustave C.; Martin, Lisa C.; Blaha, Charles A.


    Of vital interest to aerodynamic researchers is precise knowledge of the flow velocity profile next to the surface. This information is needed for turbulence model development and the calculation of viscous shear force. Though many instruments can determine the flow velocity profile near the surface, none of them can make measurements closer than approximately 0.01 in. from the surface. The thermocouple boundary-layer rake can measure much closer to the surface than conventional instruments can, such as a total pressure boundary layer rake, hot wire, or hot film. By embedding the sensors (thermocouples) in the region where the velocity is equivalent to the velocity ahead of a constant thickness strut, the boundary-layer flow profile can be obtained. The present device fabricated at the NASA Glenn Research Center microsystem clean room has a heater made of platinum and thermocouples made of platinum and gold. Equal numbers of thermocouples are placed both upstream and downstream of the heater, so that the voltage generated by each pair at the same distance from the surface is indicative of the difference in temperature between the upstream and downstream thermocouple locations. This voltage differential is a function of the flow velocity, and like the conventional total pressure rake, it can provide the velocity profile. In order to measure flow extremely close to the surface, the strut is made of fused quartz with extremely low heat conductivity. A large size thermocouple boundary layer rake is shown in the following photo. The latest medium size sensors already provide smooth velocity profiles well into the boundary layer, as close as 0.0025 in. from the surface. This is about 4 times closer to the surface than the previously used total pressure rakes. This device also has the advantage of providing the flow profile of separated flow and also it is possible to measure simultaneous turbulence levels within the boundary layer.

  17. A right to strike? (United States)

    Jennings, K; Western, G


    During 1995, there was a major shift in the United Kingdom in the debate of whether it is right for nurses to strike. The Royal College of Nursing, the former advocate of a non-industrial action policy, moved towards the UNISON position that industrial action is ethical in some circumstances, as well as the necessary thing to do. The authors, both nurses and UNISON officials, look at the reasons for this change and why UNISON's historical position sees industrial action as an effective weapon in defending services, as well as wages and jobs. It can be right to strike.

  18. A Future Moon Mission: Curatorial Statistics on Regolith Fragments Applicable to Sample Collection by Raking (United States)

    Allton, J. H.; Bevill, T. J.


    The strategy of raking rock fragments from the lunar regolith as a means of acquiring representative samples has wide support due to science return, spacecraft simplicity (reliability) and economy [3, 4, 5]. While there exists widespread agreement that raking or sieving the bulk regolith is good strategy, there is lively discussion about the minimum sample size. Advocates of consor-tium studies desire fragments large enough to support petrologic and isotopic studies. Fragments from 5 to 10 mm are thought adequate [4, 5]. Yet, Jolliff et al. [6] demonstrated use of 2-4 mm fragments as repre-sentative of larger rocks. Here we make use of cura-torial records and sample catalogs to give a different perspective on minimum sample size for a robotic sample collector.

  19. The effects of raking on sugar pine mortality following prescribed fire in Sequoia and Kings Canyon National Parks, California, USA (United States)

    Nesmith, Jonathan C. B.; O'Hara, Kevin L.; van Mantgem, Phillip J.; de Valpine, Perry


    Prescribed fire is an important tool for fuel reduction, the control of competing vegetation, and forest restoration. The accumulated fuels associated with historical fire exclusion can cause undesirably high tree mortality rates following prescribed fires and wildfires. This is especially true for sugar pine (Pinus lambertiana Douglas), which is already negatively affected by the introduced pathogen white pine blister rust (Cronartium ribicola J.C. Fisch. ex Rabenh). We tested the efficacy of raking away fuels around the base of sugar pine to reduce mortality following prescribed fire in Sequoia and Kings Canyon national parks, California, USA. This study was conducted in three prescribed fires and included 457 trees, half of which had the fuels around their bases raked away to mineral soil to 0.5 m away from the stem. Fire effects were assessed and tree mortality was recorded for three years after prescribed fires. Overall, raking had no detectable effect on mortality: raked trees averaged 30% mortality compared to 36% for unraked trees. There was a significant effect, however, between the interaction of raking and average pre-treatment forest floor fuel depth: the predicted probability of survival of a 50 cm dbh tree was 0.94 vs. 0.96 when average pre-treatment fuel depth was 0 cm for a raked and unraked tree, respectively. When average pre-treatment forest floor fuel depth was 30 cm, the predicted probability of survival for a raked 50 cm dbh tree was 0.60 compared to only 0.07 for an unraked tree. Raking did not affect mortality when fire intensity, measured as percent crown volume scorched, was very low (0% scorch) or very high (>80% scorch), but the raking treatment significantly increased the proportion of trees that survived by 9.6% for trees that burned under moderate fire intensity (1% to 80% scorch). Raking significantly reduced the likelihood of bole charring and bark beetle activity three years post fire. Fuel depth and anticipated fire intensity need

  20. DEM Simulations of Granular Secondary Flow in Cylindrical Vertical Bladed Mixer – Effect of Blade Rake.


    Trávníčková, T. (Tereza); Havlica, J. (Jaromír); Kohout, M.


    Mixing of granular systems is one of the most used chemical engineering unit operations. However, detailed description of the dynamics of granular flows through experiments is difficult. Therefore, usage of mathematical modeling increases. In this paper we deal with DEM (Discreet Element Method) simulations of mixing glass beads in a cylindrical vertical bladed mixer. The aim of this work is to describe the influence of blade rake on the development of granular secondary flows for different s...

  1. Investigation of the Effect of Cutting Tool Rake Angle on Feed Force


    GÜNAY, Mustafa; ŞEKER, Ulvi


    This paper presents a study of investigation into cutting tool rake angle effect on feed force to have secondary important during machining. For this purpose, a dynamometer was designed and manufactured for experimental determination of the cutting forces and mounted to a CNC turning centre. With the help of two beam type load cells suitably located on the dynamometer, it became possible to sense the cutting tool deflections due to the cutting forces. AISI 1040 was used as the workpiece mater...

  2. Joint statistics of partial sums of ordered exponential variates and performance of GSC RAKE receivers over rayleigh fading channel

    KAUST Repository

    Nam, Sungsik


    Spread spectrum receivers with generalized selection combining (GSC) RAKE reception were proposed and have been studied as alternatives to the classical two fundamental schemes: maximal ratio combining and selection combining because the number of diversity paths increases with the transmission bandwidth. Previous work on performance analyses of GSC RAKE receivers based on the signal to noise ratio focused on the development of methodologies to derive exact closed-form expressions for various performance measures. However, some open problems related to the performance evaluation of GSC RAKE receivers still remain to be solved such as the exact performance analysis of the capture probability and an exact assessment of the impact of self-interference on GSC RAKE receivers. The major difficulty in these problems is to derive some joint statistics of ordered exponential variates. With this motivation in mind, we capitalize in this paper on some new order statistics results to derive exact closed-form expressions for the capture probability and outage probability of GSC RAKE receivers subject to self-interference over independent and identically distributed Rayleigh fading channels, and compare it to that of partial RAKE receivers. © 2011 IEEE.

  3. Analysis of Dual Rotating Rake Data from the NASA Glenn Advanced Noise Control Fan Duct with Artificial Sources (United States)

    Dahl, Milo D.; Sutliff, Daniel L.


    The Rotating Rake mode measurement system was designed to measure acoustic duct modes generated by a fan stage. Initially, the mode amplitudes and phases were quantified from a single rake measurement at one axial location. To directly measure the modes propagating in both directions within a duct, a second rake was mounted to the rotating system with an offset in both the axial and the azimuthal directions. The rotating rake data analysis technique was then extended to include the data measured by the second rake. The analysis resulted in a set of circumferential mode levels at each of the two rake microphone locations. Radial basis functions were then least-squares fit to this data to obtain the radial mode amplitudes for the modes propagating in both directions within the duct. Validation experiments have been conducted using artificial acoustic sources. Results are shown for the measurement of the standing waves in the duct from sound generated by one and two acoustic sources that are separated into the component modes propagating in both directions within the duct. Measured reflection coefficients from the open end of the duct are compared to analytical predictions.

  4. Algab õppus "Saber Strike"

    Index Scriptorium Estoniae


    Täna algab Eestis, Lätis ja Leedus Ameerika Ühendriikide Euroopa väekoondise õppus "Saber Strike", mille eesmärk on maaväeüksuste koostöö harjutamine. Õppusest võtab osa üle 2000 kaitseväelase Baltimaadest, USAst, Ühendkuningriigist, Taanist, Norrast, Soomest ja Saksamaalt. Eestist osaleb õppusel ligi 400 kaitseväelast

  5. Global strike hypersonic weapons (United States)

    Lewis, Mark J.


    Beginning in the 1940's, the United States has pursued the development of hypersonic technologies, enabling atmospheric flight in excess of five times the speed of sound. Hypersonic flight has application to a range of military and civilian applications, including commercial transport, space access, and various weapons and sensing platforms. A number of flight tests of hypersonic vehicles have been conducted by countries around the world, including the United States, Russia, and China, that could lead the way to future hypersonic global strike weapon systems. These weapons would be especially effective at penetrating conventional defenses, and could pose a significant risk to national security.

  6. Determination of the Strike and Dip of Planar Geological Structures: A Computer Solution. (United States)

    Pizarro, Antonio


    Explains the use of the 3-dimensional analytic geometry method to find values for a field geology problem. Gives a description of the mathematical theory for this method which can be applied to data obtained by drilling as well as open surfaces, and a computer program. (RT)

  7. Impulse of a Kendo Strike

    Directory of Open Access Journals (Sweden)

    Masahiro Abe


    Full Text Available An expert swordsman struck a target with a kendo sword. The velocity and force of the strike were measured. The relationship between the strike velocity, impact force and effective mass of the sword was investigated. It was shown that the effective mass of the sword remains constant for typical strike velocities.

  8. DIP and DIP + 2 as glutathione oxidants and radiation sensitizers in cultured Chinese hamster cells

    International Nuclear Information System (INIS)

    Harris, J.W.; Power, J.A.; Kosower, N.S.; Kosower, E.M.


    Two diamide analogues, diazene dicarboxylic acid bis (N'-methyl-piperazide) or DIP, and its bis-N'-methyl iodide salt, or DIP + 2, were tested for their ability to penetrate cultured Chinese hamster cells and oxidize intracellular glutathione. DIP penetrated the cells at a reasonable rate at 18 0 C, 160 nmoles being required to oxidize the endogenous glutathione of 2 x 10 6 cells, but it penetrated very slowly at 0 0 C. DIP + 2 did not effectively oxidize glutathione in Chinese hamster cells, possibly because it did not enter the cels. DIP became toxic after about 10 min of exposure, but its toxicity could be moderated by using anoxic conditions. DIP, but not DIP + 2, sensitized anoxic Chinese hamster cells to X-radiation by a factor of 1.5, an effect that was due entirely to removal of the shoulder from the survival curve. (author)

  9. Mantle wedge serpentinization effects on slab dips

    Directory of Open Access Journals (Sweden)

    Eh Tan


    Full Text Available The mechanical coupling between a subducting slab and the overlying mantle wedge is an important factor in controlling the subduction dip angle and the flow in mantel wedge. This paper investigates the role of the amount of mantle serpentinization on the subduction zone evolution. With numerical thermos-mechanical models with elasto-visco-plastic rheology, we vary the thickness and depth extent of mantle serpentinization in the mantle wedge to control the degree of coupling between the slab and mantle wedge. A thin serpentinized mantle layer is required for stable subduction. For models with stable subduction, we find that the slab dip is affected by the down-dip extent and the mantle serpentinization thickness. A critical down-dip extent exists in mantle serpentinization, determined by the thickness of the overriding lithosphere. If the down-dip extent does not exceed the critical depth, the slab is partially coupled to the overriding lithosphere and has a constant dip angle regardless of the mantle serpentinization thickness. However, if the down-dip extent exceeds the critical depth, the slab and the base of the overriding lithosphere would be separated and decoupled by a thick layer of serpentinized peridotite. This allows further slab bending and results in steeper slab dip. Increasing mantle serpentinization thickness will also result in larger slab dip. We also find that with weak mantle wedge, there is no material flowing from the asthenosphere into the serpentinized mantle wedge. All of these results indicate that serpentinization is an important ingredient when studying the subduction dynamics in the mantle wedge.

  10. Máquinas de rastrillar y modelos de utilidad - Raking machines and utility models

    Directory of Open Access Journals (Sweden)

    Santos López, Pascual


    Full Text Available With a background and forged through hard work, Vicente Martínez Piñera, tried to improve working conditions in the esparto factories of Cieza. From "menaor" a teacher, your mechanical skills led him to invent spinning, raking and manufacture wool, always introducing innovations in this difficult and tough industry. As the inventor profession does not usually give great benefits, became industrial, manufacturing and marketing its own machines and also esparto products manufactured as large hawsers for boat

  11. Impact of Self-Interference on the Performance of Joint Partial RAKE Receiver and Adaptive Modulation

    KAUST Repository

    Nam, Sung Sik


    In this paper, we investigate the impact of self-interference on the performance of a joint partial RAKE (PRAKE) receiver and adaptive modulation over both independent and identically distributed and independent but non-identically distributed Rayleigh fading channels. To better observe the impact of self-interference, our approach starts from considering the signal to interference plus noise ratio. Specifically, we accurately analyze the outage probability, the average spectral efficiency, and the average bit error rate as performance measures in the presence of self-interference. Several numerical and simulation results are selected to present the performance of the joint PRAKE receiver and adaptive modulation subject to self-interference.

  12. Interference of Fano-Rashba conductance dips

    Energy Technology Data Exchange (ETDEWEB)

    Gelabert, M M; Renart, A; Serra, L, E-mail: [Departament de Fisica, Universitat de les Illes Balears, E-07122 Palma de Mallorca (Spain)


    We study the interference of two tunable Rashba regions in a quantum wire with one propagating mode. The transmission dips (Fano-Rashba dips) of the two regions either cross or anti-cross, depending on the distance between the two regions. For large separations we find Fabry-Perot oscillations due to the interference of forwards and backwards propagating modes. At small separations overlapping evanescent modes play a prominent role, leading to an enhanced transmission and destroying the conductance dip. Analytical expressions in scattering matrix theory are given and the relevance of the interference effect in a device is discussed.

  13. 75 FR 17162 - Dipping and Coating Operations (Dip Tanks) Standard; Extension of the Office of Management and... (United States)


    ...] Dipping and Coating Operations (Dip Tanks) Standard; Extension of the Office of Management and Budget's... Standard on Dipping and Coating Operations (Dip Tanks) (29 CFR 1910.126(g)(4)). DATES: Comments must be... of efforts in obtaining information (29 U.S.C. 657). The Standard on Dipping and Coating Operations...

  14. Current trend in latex dipped products manufacturing

    International Nuclear Information System (INIS)

    Wong, W.S.C.


    The paper present the activities in dipped products manufacturing in Malaysia; the activities carried out by MARGMA - Malaysian Rubber Glove manufacturer; other issues discussed such as labour, pricing environmental issue, product certification in this activity

  15. Flight Test Results from the Rake Airflow Gage Experiment on the F-15B Airplane (United States)

    Frederick, Michael A.; Ratnayake, Nalin A.


    The Rake Airflow Gage Experiment involves a flow-field survey rake that was flown on the Propulsion Flight Test Fixture at the NASA Dryden Flight Research Center using the Dryden F-15B research test bed airplane. The objective of this flight test was to ascertain the flow-field angularity, local Mach number profile, total pressure distortion, and dynamic pressure at the aerodynamic interface plane of the Channeled Centerbody Inlet Experiment. This new mixed-compression, supersonic inlet is planned for flight test in the near term. Knowledge of the flow-field characteristics at this location underneath the airplane is essential to flight test planning and computational modeling of the new inlet, anairplane, flying at a free-stream Mach number of 1.65 and a pressure altitude of 40,000 ft, would achieve the desired local Mach number for the future inlet flight test. Interface plane distortion levels of 2 percent and a local angle of attack of -2 deg were observed at this condition. Alternative flight conditions for future testing and an exploration of certain anomalous data also are provided.

  16. Energy Analysis of Decoders for Rakeness-Based Compressed Sensing of ECG Signals. (United States)

    Pareschi, Fabio; Mangia, Mauro; Bortolotti, Daniele; Bartolini, Andrea; Benini, Luca; Rovatti, Riccardo; Setti, Gianluca


    In recent years, compressed sensing (CS) has proved to be effective in lowering the power consumption of sensing nodes in biomedical signal processing devices. This is due to the fact the CS is capable of reducing the amount of data to be transmitted to ensure correct reconstruction of the acquired waveforms. Rakeness-based CS has been introduced to further reduce the amount of transmitted data by exploiting the uneven distribution to the sensed signal energy. Yet, so far no thorough analysis exists on the impact of its adoption on CS decoder performance. The latter point is of great importance, since body-area sensor network architectures may include intermediate gateway nodes that receive and reconstruct signals to provide local services before relaying data to a remote server. In this paper, we fill this gap by showing that rakeness-based design also improves reconstruction performance. We quantify these findings in the case of ECG signals and when a variety of reconstruction algorithms are used either in a low-power microcontroller or a heterogeneous mobile computing platform.

  17. Precision Strike Annual Programs Review (United States)


    Damage Area*• GPS / INS Navigation + SAL Terminal • Precise əm CEP • Low Probability of Collateral Damage • GPS Extends Glide Range to 10+km • Agile...Page 311 Mar 09 Unclassified Unclassified Viper Strike Lineage Viper Strike SAL Seeker Proof of Principle Demos I & II Hunter-Viper Strike Quick...Information Management • CCA - Clinger Cohen Act • RIT- Rapid Improvement Team • BMMP – Business Management Modernization Program • BTA/ERAM – Business

  18. Seismological constraints on the down-dip shape of normal faults (United States)

    Reynolds, Kirsty; Copley, Alex


    We present a seismological technique for determining the down-dip shape of seismogenic normal faults. Synthetic models of non-planar source geometries reveal the important signals in teleseismic P and SH waveforms that are diagnostic of down-dip curvature. In particular, along-strike SH waveforms are the most sensitive to variations in source geometry, and have significantly more complex and larger-amplitude waveforms for curved source geometries than planar ones. We present the results of our forward-modelling technique for 13 earthquakes. Most continental normal-faulting earthquakes that rupture through the full seismogenic layer are planar and have dips of 30°-60°. There is evidence for faults with a listric shape from some of the earthquakes occurring in two regions; Tibet and East Africa. These ruptures occurred on antithetic faults, or minor faults within the hanging walls of the rifts affected, which may suggest a reason for the down-dip curvature. For these earthquakes, the change in dip across the seismogenic part of the fault plane is ≤30°.

  19. Study on conditional probability of surface rupture: effect of fault dip and width of seismogenic layer (United States)

    Inoue, N.


    The conditional probability of surface ruptures is affected by various factors, such as shallow material properties, process of earthquakes, ground motions and so on. Toda (2013) pointed out difference of the conditional probability of strike and reverse fault by considering the fault dip and width of seismogenic layer. This study evaluated conditional probability of surface rupture based on following procedures. Fault geometry was determined from the randomly generated magnitude based on The Headquarters for Earthquake Research Promotion (2017) method. If the defined fault plane was not saturated in the assumed width of the seismogenic layer, the fault plane depth was randomly provided within the seismogenic layer. The logistic analysis was performed to two data sets: surface displacement calculated by dislocation methods (Wang et al., 2003) from the defined source fault, the depth of top of the defined source fault. The estimated conditional probability from surface displacement indicated higher probability of reverse faults than that of strike faults, and this result coincides to previous similar studies (i.e. Kagawa et al., 2004; Kataoka and Kusakabe, 2005). On the contrary, the probability estimated from the depth of the source fault indicated higher probability of thrust faults than that of strike and reverse faults, and this trend is similar to the conditional probability of PFDHA results (Youngs et al., 2003; Moss and Ross, 2011). The probability of combined simulated results of thrust and reverse also shows low probability. The worldwide compiled reverse fault data include low fault dip angle earthquake. On the other hand, in the case of Japanese reverse fault, there is possibility that the conditional probability of reverse faults with less low dip angle earthquake shows low probability and indicates similar probability of strike fault (i.e. Takao et al., 2013). In the future, numerical simulation by considering failure condition of surface by the source

  20. Continental United States Hurricane Strikes (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Continental U.S. Hurricane Strikes Poster is our most popular poster which is updated annually. The poster includes all hurricanes that affected the U.S. since...

  1. On the dip angle of subducting plates (United States)

    Hsui, Albert T.; Tang, Xiao-Ming; Toksoz, M. Nafi


    A new approximate analytic model is developed for the thermal structure of a subducting plate with a finite length. This model provides the capability of easily examining the thermal and mechanical structure of a subducting plate with different lengths and at different angles. Also, the torque balance of a descending plate can be examined, and effects such as the leading edge effect, the adiabatic compression effect, and the phase change effect can be incorporated. A comparison with observed data indicates that short slabs are likely under torque equilibrium at present, while long slabs are probably dominated by their gravitational torques such that their dip angles are transient, moving toward a steeper dip angle similar to that of the Mariana slab.

  2. Hydrodynamically driven colloidal assembly in dip coating. (United States)

    Colosqui, Carlos E; Morris, Jeffrey F; Stone, Howard A


    We study the hydrodynamics of dip coating from a suspension and report a mechanism for colloidal assembly and pattern formation on smooth substrates. Below a critical withdrawal speed where the coating film is thinner than the particle diameter, capillary forces induced by deformation of the free surface prevent the convective transport of single particles through the meniscus beneath the film. Capillary-induced forces are balanced by hydrodynamic drag only after a minimum number of particles assemble within the meniscus. The particle assembly can thus enter the thin film where it moves at nearly the withdrawal speed and rapidly separates from the next assembly. The interplay between hydrodynamic and capillary forces produces periodic and regular structures below a critical ratio Ca(2/3)/sqrt[Bo] particles in suspension. The hydrodynamically driven assembly documented here is consistent with stripe pattern formations observed experimentally in dip coating.

  3. Three cases of desquamative interstitial pneumonia (DIP

    Directory of Open Access Journals (Sweden)

    Tabatabaie P


    Full Text Available D.I.P is a rare disease. The etiology is unknown. It is characterized pathologically by massive proliferation and desquamation of alveolar cells and thickening of the alveolar walls. In our studies from 1368-73 we have three patients hospitalized earlier the prognosis would be much better. Corticosteroid and other effective drugs would be helpfull in treatment of these patients.

  4. Dip Process Thermal Barrier Coatings for Superalloys. (United States)


    melting Ce-Co or Ce-Ni alloy, By internally oxidizing these coatings, t is possible to obtain a duplex with a CeO2 -rich oxide scale as the outer layer... Slurry Fusion Coatings......................15 Ultra-Rich Cerium (.- 90%) Dip Coating on IN738 .......... 17 CONCLUSIONS...alloy powder slurried with an organic vehicle, then fired in an inert atmosphere. Our original concept was to selectively oxidize cerium, using CO/CO 2

  5. [Physicians' strikes--ethical considerations]. (United States)

    Glick, Shimon; Schwarzfuchs, Dan


    Strikes in general represent a solution based on a form of coercion. Historically, the striker caused direct damage to his employer, who was responsible for the perceived unfair treatment of the employee. In the case of strikes in the public sector, the employer is generally not harmed, but innocent citizens suffer in order to pressure the government agencies, a questionable practice from an ethical viewpoint. Physicians' strikes have more serious ethical problems. They cause suffering and death to innocent citizens. They violate the ethical codes to which physicians have committed themselves as professionals, and they seriously impair the trust of the public in physicians. Better and more ethical ways to provide fair compensation for physicians must be employed, perhaps like those used for judges and members of the IDF.

  6. Blind Adaptive Decorrelating RAKE (DRAKE Downlink Receiver for Space-Time Block Coded Multipath CDMA

    Directory of Open Access Journals (Sweden)

    Jayaweera Sudharman K


    Full Text Available A downlink receiver is proposed for space-time block coded CDMA systems operating in multipath channels. By combining the powerful RAKE receiver concept for a frequency selective channel with space-time decoding, it is shown that the performance of mobile receivers operating in the presence of channel fading can be improved significantly. The proposed receiver consists of a bank of decorrelating filters designed to suppress the multiple access interference embedded in the received signal before the space-time decoding. The new receiver performs the space-time decoding along each resolvable multipath component and then the outputs are diversity combined to obtain the final decision statistic. The proposed receiver relies on a key constraint imposed on the output of each filter in the bank of decorrelating filters in order to maintain the space-time block code structure embedded in the signal. The proposed receiver can easily be adapted blindly, requiring only the desired user′s signature sequence, which is also attractive in the context of wireless mobile communications. Simulation results are provided to confirm the effectiveness of the proposed receiver in multipath CDMA systems.

  7. Cattle dipping practices in the Philippines and the degradation of coumaphos in a simulated cattle dip

    International Nuclear Information System (INIS)

    Calumpang, S.M.F.; Medina, M.J.B.; Tejada, A.W.


    A survey of cattle dip facilities and current practices employed was done. Coumaphos and ethion were the commonly used acaricides in the four respondent stock farms. The behavior of coumaphos in a simulated model cattle dip was monitored using radiotracer techniques. Degradation was rapid, resulting in the formation of potasan metabolite and bound residues in the sediment. A rapid field method for the detection of organophosphate pesticides was used in monitoring the degradation of coumaphos in a cattle dip. The sensitivity of the method is comparable to the conventional HPLC method employed. This rapid field method can easily be used by cattle ranch owners to monitor coumaphos content of the vat facility so that recharging could be made in order to prevent the onset of resistance development in cattle tick. (author)

  8. Dip-coating of yield stress fluids (United States)

    Maillard, M.; Bleyer, J.; Andrieux, A. L.; Boujlel, J.; Coussot, P.


    We review and discuss the characteristics of dip-coating of yield stress fluids on the basis of theoretical considerations, numerical simulations of the flow in the bath, and experimental data with different materials. We show that in general, due to the yield stress, viscous dissipations are sufficiently large for capillary effects to be negligible in the process. Dip-coating with yield stress fluids is thus essentially governed by an equilibrium between viscous and gravity effects. In contrast with simple liquids, the coated thickness is uniform and remains fixed to the plate. At low velocities, it appears to tend to a value significantly smaller than the Derjaguin and Levi prediction [B. V. Derjaguin and S. M. Levi, Film Coating Theory (The Focal Press, London, 1964)], i.e., critical thickness of stoppage of a free surface flow along a vertical plate. We show that this comes from the fact that in the bath only a relatively small layer of fluid is in its liquid regime along the moving plate, while the rest of the material is in a solid regime. From numerical simulations, we describe the general trends of this liquid layer, and in particular, its thickness as a function of the rheological characteristics and plate velocity. We finally propose a model for the dip-coating of yield stress fluid, assuming that the solid volume of fluid finally fixed to the plate results from the mass flux of the liquid layer in the bath minus a mass flux due to some downward flow under gravity in the transition zone. A good agreement between this model and experimental data is found for a fluid with a yield stress larger than 20 Pa.

  9. Dips and rims in dried colloidal films. (United States)

    Parneix, C; Vandoolaeghe, P; Nikolayev, V S; Quéré, D; Li, J; Cabane, B


    We describe a spatial pattern arising from the nonuniform evaporation of a colloidal film. Immediately after the film deposition, an obstacle is positioned above its free surface, minimizing evaporation at this location. In a first stage, the film dries everywhere but under the obstacle, where a liquid region remains. Subsequently, this liquid region evaporates near its boundaries with the dry film. This loss of water causes a flow of liquid and particles from the center of the obstructed region to its periphery. The final film has a dip surrounded by a rim whose diameter is set by the obstacle. This turns out to be a simple technique for structuring films of nanometric thickness.

  10. Dip filters; Filtros de echado recursivos

    Energy Technology Data Exchange (ETDEWEB)

    Cabrales Vargas, A.; Chavez Perez, S. [Facultad de Ingenieria, UNAM, Mexico, D.F. (Mexico)


    In exploration seismology, dip filters are used to enhance subsoil images by attenuating coherent noise and other signals. They can be applied in frequency-wavenumber (f-k), frequency-distance (f-x), time-wavenumber (t-k) or time distance (t-k) domains. Fourier domain assumes constant dips. Recursive dip filters are applied in t-x domain, as they do not have this limitation. However, we have to determine their optimal parameters by trial and error. Recursive dip filters are based on single order Butterworth filters, by adding the wavenumber. Their amplitude spectrum is a surface. We perform a bilinear transform to digitize the filter and pass from the f-k to the t-k domain. We obtain the t-x domain filter by inverse transforming through wavenumber and by using a three-coefficient approximation (leading to a tridiagonal matrix). For the sake of illustration in geophysical engineering, we apply these filters to a shallow field record, to attenuate the air wave and random noise, and to a marine seismic section to enhance a fault zone. Both examples show that these filters are useful and practical to enhance seismic data. Their use is easier and more economical than median filters, utilized nowadays in commercial software for the oil industry. [Spanish] En sismologia de exploracion, los filtros de echado se utilizan para enfatizar imagenes del subsuelo, atenuado ruido coherente y otras senales. Pueden aplicarse en los dominios de frecuencia y numero de onda (f-k), frecuencia y distancia (f-x), tiempo y numero de onda (t-k) o tiempo y distancia (t-x). En el dominio de Fourier suponemos echados constantes. Los filtros de echado recursivos se aplican en el dominio t-x, careciendo de esta limitante. Sin embargo, tenemos que recurrir al ensayo y error para determinar sus parametros optimos. Los filtros de hecho recursivos se basan en filtros de Butterworth de orden uno, anadiendo el numero de onda. Su espectro de amplitud es una superficie. Utilizamos la trasformada

  11. Hyperuricemia and non-dipping blood pressure

    Directory of Open Access Journals (Sweden)

    Marrone O


    Full Text Available Oreste Marrone,1 Maria Rosaria Bonsignore1,21National Research Council, Institute of Biomedicine and Molecular Immunology, Palermo, Italy; 2Biomedical Department of Internal and Specialistic Medicine, University of Palermo, Palermo, ItalyThe strong association between the metabolic derangements that characterize the metabolic syndrome with arterial hypertension is very well-known, as it is the common finding of hyperuricemia in the patients with the metabolic syndrome. Besides, hyperuricemia has been found to be associated with cardiovascular, renal, and metabolic diseases; including not only gout but also type 2 diabetes mellitus, although its role as a risk factor is still debated.1 We were not aware of previous studies describing an association between uric acid levels and the non-dipping 24-hour blood pressure (BP pattern, and for that reason we were intrigued by Tutal et al’s article, regarding hypertensive patients with the metabolic syndrome.2 The authors explain some possible causes that could determine an increase in uric acid in the metabolic syndrome, and describe some pathogenetic mechanisms of systemic hypertension in their patients. We would like to point out one more possible mechanism that could link hyperuricemia to non-dipping BP.View original paper by Tutal et al

  12. A note on 2-D lithospheric deformation due to a blind strike-slip fault

    Indian Academy of Sciences (India)

    Analytical solution for the problem of a surface-breaking long strike-slip fault in an elastic layer overlying an elastic half-space is well known. The purpose of this note is to obtain the corresponding solution for a blind fault. Since the solution is valid for arbitrary values of the fault-depth and the dip angle, the effects of these ...

  13. Respecting the right to strike

    CERN Multimedia

    Staff Association


    Since two years the representatives of the employers in the ILO, a tripartite multilateral body responsible for guaranteeing the correct application of an international labour code, try to weaken the global work regulations. On the occasion of the Global Day of Action for the right to strike at the invitation of the Geneva community of Union action (Communauté genevoise d’action syndicale) and the Swiss Trade Union Association (Union syndicale suisse) around noon on Wednesday 18th February some fifty staff representatives of international organizations gathered on the place des Nations in Geneva to reaffirm the importance of this fundamental right, too often flouted. A delegation of the CERN Staff Association was also present. In a short speech, the Staff Association said that, while being one of the fundamental human rights, to be efficient the right to strike must be used intelligently. It must be implemented taking into account the sensitivities of the professional environment and r...

  14. Propagation of strike-slip faults across Holocene volcano-sedimentary deposits, Pasto, Colombia (United States)

    Rovida, Andrea; Tibaldi, Alessandro


    This study contributes to the understanding of shear failure development on the basis of macroscopic field data collected in latest Pleistocene-Holocene pyroclastic and fluvio-lacustrine deposits in the Pasto Valley, SW Colombia. Here there is a pervasive system of microfaults and joints. Right-lateral strike-slip microfaults strike N065°, whereas left-lateral strike-slip microfaults strike N120°. Three main joint sets strike N, N065° and N020° in decreasing order of frequency. Stress computation gives a horizontal σ1 trending ˜N060° and a horizontal σ3 trending ˜N150°, consistent with earthquake focal mechanisms and stress inversion of main faults. Synthetic shears dominate resulting from nucleation of older cracks. In the basement cropping out northeast of Pasto, the NE- to ENE-striking Buesaco, Aranda and Pasto Faults show evidence of latest Pleistocene-Holocene right-lateral strike-slip motions. The structures in the Pasto Valley can be interpreted as a Mode III damage zone representing the up-dip propagation of the main faults across the young volcano-sedimentary deposits.

  15. 3D dynamic simulations of spontaneous rupture propagation governed by different constitutive laws with rake rotation allowed

    Directory of Open Access Journals (Sweden)

    M. Cocco


    Full Text Available In this work we present a 3D Finite Difference numerical method to model the dynamic spontaneous propagation of an earthquake rupture on planar faults in an elastic half-space. We implement the Traction-at-Split-Nodes fault boundary condition for a system of faults, either vertical or oblique, using different constitutive laws. We can adopt both a slip-weakening law to prescribe the traction evolution within the breakdown zone or rate- and state-dependent friction laws, which involve the choice of an evolution relation for the state variable. Our numerical procedure allows the use of oblique and heterogeneous distribution of initial stress and allows the rake rotation. This implies that the two components of slip velocity and total dynamic traction are coupled together to satisfy, in norm, the adopted constitutive law. The simulations presented in this study show that the rupture acceleration to super-shear crack speeds occurs along the direction of the imposed initial stress; the rupture front velocity along the perpendicular direction is slower than that along the pre-stress direction. Depending on the position on the fault plane the orientation of instantaneous total dynamic traction can change with time with respect to the imposed initial stress direction. These temporal rake rotations depend on the amplitude of initial stress and on its distribution on the fault plane. They also depend on the curvature and direction of the rupture front with respect to the imposed initial stress direction: this explains why rake rotations are mostly located near the rupture front and within the cohesive zone.

  16. Finite Element Modelling of the effect of tool rake angle on tool temperature and cutting force during high speed machining of AISI 4340 steel (United States)

    Sulaiman, S.; Roshan, A.; Ariffin, M. K. A.


    In this paper, a Finite Element Method (FEM) based on the ABAQUS explicit software which involves Johnson-Cook material model was used to simulate cutting force and tool temperature during high speed machining (HSM) of AISI 4340 steel. In this simulation work, a tool rake angle ranging from 0° to 20° and a range of cutting speeds between 300 to 550 m/min was investigated. The purpose of this simulation analysis was to find optimum tool rake angle where cutting force is smallest as well as tool temperature is lowest during high speed machining. It was found that cutting forces to have a decreasing trend as rake angle increased to positive direction. The optimum rake angle observed between 10° and 18° due to decrease of cutting force as 20% for all simulated cutting speeds. In addition, increasing cutting tool rake angle over its optimum value had negative influence on tool's performance and led to an increase in cutting temperature. The results give a better understanding and recognition of the cutting tool design for high speed machining processes.

  17. The Effects of Approach Angle and Rake Angle Due to Chatter Vibrations on Surface Roughness in Turning


    NEŞELİ, Süleyman; YALDIZ, Süleyman


    In this study, the effect of the chatter vibrations depend on tool geometry on surface roughness in turning has been investigated. Machining process in universal lathe is carried out on AISI 1040 steel in dry cutting condition using various approaching/entering angles (60°, 75°, 90°) and rake angles (-3°,-6°,-9°) at depth of cut of 0.5 mm. During cutting processes, tool nose radius and tool overhang (tool noise of kept point distance) and cutting speed, feed rate and spindle speed as cutting ...


    Directory of Open Access Journals (Sweden)

    Agung Warsito


    Full Text Available Tegangan dip pada jaringan tegangan menengah (JTM akibat adanya gangguan hubung singkat satu fasa ke tanah disimulasikan dengan menggunakan model EMTP ( Electromagnetic Transient Program . Hasil-hasil gelombang tegangan dip yang ditampilkan untuk selanjutnya dianalisa. Data-data jaringan tegangan menengah sebagai studi kasus diambil dari feeder srondol 1 ( SRL 1 yang menyuplai tenaga listrik ke kampus UNDIP Tembalang. Berdasarkan hasil simulasi, didapatkan tegangan dip di titik gangguan hubung singkat satu fasa ke tanah pada belitan primer transformator DIII Teknik sebesar 61,5 % tegangan fasa-netral. Tegangan dip ini tidak mengganggu operasi beban listrik apabila terjadi kurang dari 0,2 detik. Sementara tegangan dip akibat gangguan hubung singkat satu fasa pada saluran antara percabangan Teknik Kimia dan saluran Teknik Mesin – Fakultas Perikanan dan Ilmu Kelautan sebesar 72,49 % dan tegangan dip ini tidak akan menyebabkan sistem tergganggu apabila terjadi kurang dari 0,5 detik.

  19. Macular damage following lightning strikes. (United States)

    Augustin, A J; Koch, F; Böker, T


    Two men with recent history of lightining strike were referred to our hospital. Both patients complained of metamorphosia in one eye and reduced visual acuity. Funduscopy revealed target-like alterations at the fovea. Fluorescein angiography showed window defects of the central retinal pigment epithelium in both patients. One patient developed an anterior subcapsular cataract. If the eye is part of the current-circuit, the melanin granules of the iris, pigment epithelium, and choroid might act as a resistor. The resulting accumulation of heat may lead to damage of the surrounding tissues.

  20. Women, transition and strikes in Serbia


    Novaković, Nada G.


    The author, in a sociological way, describes and analyzes the concepts of transition, privatization and strikes in Serbia, particularly the place of women in it. It examines the most important economic and social causes and consequences of these phenomena. The main hypothesis is: women's strikes in the Serbian transition are less efficient than strikes and public protests of women in the developed world and the second Yugoslavia. A strike is a class conflict, in which the workers are fighting...

  1. 14 CFR 35.38 - Lightning strike. (United States)


    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Lightning strike. 35.38 Section 35.38... STANDARDS: PROPELLERS Tests and Inspections § 35.38 Lightning strike. The applicant must demonstrate, by... lightning strike without causing a major or hazardous propeller effect. The limit to which the propeller has...

  2. Strikes in Serbia since 2000 to 2005

    Directory of Open Access Journals (Sweden)

    Novaković Nada


    Full Text Available In this article author deals with main characteristics of strikes in Serbia within the period 2000–2005. Analysis starts with thesis that strike is open class conflict within class divided society. Therefore strike is radical form of trade union struggle for workers rights. Main questions in the analysis were: on social structure as a background of strikes, on organizations and trade unions included in it, on effects of strikes in Serbia in the given period. Main thesis of the article is that every power dislike strikes and is ready to do everything to diminish them. Main reason lies in the class nature of social conflict that underlie them. Main processes that underlie strike phenomena in Serbia since 2000. are the processes of originally capital accumulation. These bring about the formation of new capitalist class and proletariat of all professions. Author gives a brief analysis of privatization process, as well as of restructuring of public sector and deregulation of economy trying to show the role of all of it in origins of strikes. Main conclusion is that there are large number of strikes in all parts of society, that are well organized, with support of one or more trade unions. For these in power they are factor of obstacle on the way of successful transition. As for the reasons and outcomes these strikes are akin to the strikes at the beginning of 19th century.

  3. Social support and nocturnal blood pressure dipping: a systematic review. (United States)

    Fortmann, Addie L; Gallo, Linda C


    Attenuated nocturnal blood pressure (BP) dipping is a better predictor of cardiovascular disease (CVD) morbidity and mortality than resting BP measurements. Studies have reported associations between social support, variously defined, and BP dipping. A systematic review of the literature was conducted to investigate associations of functional and structural social support with nocturnal BP dipping assessed over a minimum of 24 hours. A total of 297 articles were identified. Of these, 11 met criteria for inclusion; all studies were cross-sectional in design and included adult participants only (mean age = 19 to 72 years). Evidence was most consistent for an association between functional support and BP dipping, such that 5 of 7 studies reported statistically (or marginally) significant positive associations with BP dipping. Statistically significant functional support-BP dipping associations were moderate (standardized effect size (d) = 0.41) to large (d = 2.01) in magnitude. Studies examining structural support were fewer and relatively less consistent; however, preliminary evidence was observed for associations of marital status and social contact frequency with BP dipping. Statistically significant structural support findings were medium (d = 0.53) to large (d = 1.13) in magnitude. Overall, findings suggest a link between higher levels of functional support and greater nocturnal BP dipping; preliminary evidence was also observed for the protective effects of marriage and social contact frequency. Nonetheless, the relatively small number of studies conducted to date and the heterogeneity of findings across meaningful subgroups suggest that additional research is needed to substantiate these conclusions.

  4. Third-party support for strike action. (United States)

    Kelloway, E Kevin; Francis, Lori; Catano, Victor M; Dupré, Kathryne E


    Labor strikes are often seen as battles for public support. Members of the public are asked to show respect for a strike by refusing to cross the picket line or by joining strikers on the picket line. Such public support may affect the morale of strikers and influence the strike's duration. Despite the perceived importance of the public in labor disputes, members of third parties have not been considered in previous strike research. In 2 studies, the authors show that a new measure of third-party strike support is unidimensional and highly reliable. In both cases, union attitudes and perceptions of distributive justice were significant predictors of support for strike action. Those who are more supportive of unions in general and believe that the contract offered to the strikers was unfair were more likely to support the strike by engaging in such actions as conversing with strikers, writing letters, and refusing to cross the picket line.

  5. The efficiency of Arabidopsis thaliana floral dip transformation is determined not only by the Agrobacterium strain used but also by the physiology and the ecotype of the dipped plant. (United States)

    Ghedira, Rim; De Buck, Sylvie; Nolf, Jonah; Depicker, Ann


    To evaluate the chromosomal background of different Agrobacterium strains on floral dip transformation frequency, eight wild-type Agrobacterium strains, provided by Laboratorium voor Microbiologie Gent (LMG) and classified in different genomic groups, were compared with the commonly used Agrobacterium strains C58C1 Rif(r) (pMP90) and LBA4404 in Arabidopsis thaliana Columbia (Col-0) and C24 ecotypes. The C58C1 Rif(r) chromosomal background in combination with the pMP90 virulence plasmid showed high Col-0 floral dip transformation frequencies (0.76 to 1.57%). LMG201, which is genetically close to the Agrobacterium C58 strain, with the same virulence plasmid showed comparable or even higher transformation frequencies (1.22 to 2.28%), whereas the LBA4404 strain displayed reproducibly lower transformation frequencies (Agrobacterium chromosomal backgrounds had transformation frequencies between those of the C58C1 Rif(r) (pMP90) and LBA4404 reference strains. None of the strains could transform the C24 ecotype with a frequency higher than 0.1%. Strikingly, all Arabidopsis Col-0 floral dip transformation experiments showed a high transformation variability from plant to plant (even more than 50-fold) within and across the performed biological repeats for all analyzed Agrobacterium strains. Therefore, the physiology of the plant and, probably, the availability of competent flowers to be transformed determine, to a large extent, floral dip transformation frequencies.


    Directory of Open Access Journals (Sweden)

    Andi Trimulyono


    Full Text Available Salah satu aspek yang paling penting dalam pembuatan kapal adalah perencanaan sistem propulsi salah satu aspek dari sistem propulsi itu sendiri adalah perencanaan desain Propeller. Propeller merupakan salah satu aspek yang harus direncanakan dengan baik agar tercapai tujuan kapal dalam hal kecepatan. Kecepatan pada kapal tidak terlepas dari desain propeller yang baik agar mendapatkan gaya dorong (Thrust optimal yang dihasilkan oleh gerak propeller.Tujuan dari penelitian ini adalah untuk mengetahui nilai thrust optimum untuk Propeller TB Ari 400 HP dari analisa model variasi sudut rake dan jumlah daun yang dibuat sehingga dapat diketahui dari variasi model tersebut manakah yang memiliki nilai thrust tinggi dan torque terendah serta untuk mengetahui perbandingan nilai thrust yang dihasilkan dari variasi model B-series dan Kaplan dengan variabel sudut rake dan jumlah daun. Hasil dari penelitian ini menunjukkan Nilai thrust tertinggi dihasilkan pada model Propeller Ka5 50 diameter 1 m sudut rake 00 dengan nilai thrust tertinggi sebesar 14608,8 N pada putaran 500 RPM. Nilai torque terendah dihasilkan pada model Propeller B4 50 Series sudut 100 diameter 0,813m dengan nilai 513,967 Nm pada putaran 500 RPM. Nilai perbandingan thrust dan torque tersebut  di dapatkan dari model dengan parameter analisis dimensi yang sama dan Putaran 500 RPM. Dan mendaptkan Nilai efisiensi tertinggi diperoleh pada model propeller B4 50 sudut rake 120 diameter 0,813 m yaitu sebesar 0,6764 pada putaran 500 RPM

  7. Late Pleistocene dip-slip faulting along the Dunajec Fault, West Carpathians: Insights from alluvial sediments (United States)

    Olszak, Janusz


    This paper presents vertical movement along the Dunajec Fault during the Late Pleistocene and suggests Quaternary tectonic reactivation of diagonal strike-slip faults and their transformation into dip-slip faults in the West Carpathians. Optically stimulated luminescence (OSL) dating of Pleistocene alluvial sediments of the Dunajec and the Ochotnica rivers was employed to determine the time range of deposition of these sediments. Vertical and spatial distribution of the obtained OSL ages imply that the alluvial sediments were affected by the Dunajec Fault, which appears to have acted as a scissor fault during the Late Pleistocene. The results contribute to the discussion on the recent evolution of the Carpathians, and may support the concept of extensional collapse of the orogen.

  8. 9 CFR 72.13 - Permitted dips and procedures. (United States)


    ... proprietary brands of permitted dips—as well the use of compressed air, vat management techniques, and other... maintained and that under actual field conditions the dipping of cattle with a solution of definite strength...

  9. DiPS: A Unifying Approach for developing System Software


    Michiels, Sam; Matthijs, Frank; Walravens, Dirk; Verbaeten, Pierre


    In this paper we unify three essential features for flexible system software: a component oriented approach, self-adaptation and separation of concerns.We propose DiPS (Distrinet Protocol Stack), a component framework, which offers components, an anonymous interaction model and connectors to handle non-functional aspects such as concurrency. DiPS has effectively been used in industrial protocol stacks and device drivers.

  10. The potential of postharvest silicon dips to regulate phenolics in ...

    African Journals Online (AJOL)

    This study investigated the ability of silicon dips to enhance the phenolic content in order to reduce the incidence of chilling injury in lemon fruit. Fruits were obtained from two farms and dipped in 0, 50, 150 and 250 mg L-1 solutions of K2SiO3 for 30 min and afterward, fruit were air dried and waxed. Thereafter, fruits were ...

  11. 14 CFR 29.631 - Bird strike. (United States)


    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Bird strike. 29.631 Section 29.631... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction General § 29.631 Bird strike. The... safe landing (for Category B) after impact with a 2.2-lb (1.0 kg) bird when the velocity of the...

  12. Review of Langmuir-Wave-Caused Dips and Charge-Exchange-Caused Dips in Spectral Lines from Plasmas and their Applications

    Directory of Open Access Journals (Sweden)

    Elisabeth Dalimier


    Full Text Available We review studies of two kinds of dips in spectral line profiles emitted by plasmas—dips that have been predicted theoretically and observed experimentally: Langmuir-wave-caused dips (L-dips and charge-exchange-caused dips (X-dips. There is a principal difference with respect to positions of L-dips and X-dips relative to the unperturbed wavelength of a spectral line: positions of L-dips scale with the electron density Ne roughly as Ne1/2, while positions of X-dips are almost independent of Ne (the dependence is much weaker than for L-dips. L-dips and X-dips phenomena are important, both fundamentally and practically. The fundamental importance is due to a rich physics behind each of these phenomena. L-dips are a multi-frequency resonance phenomenon caused by a single-frequency (monochromatic electric field. X-dips are due to charge exchange at anticrossings of terms of a diatomic quasi-molecule, whose nuclei have different charges. As for important practical applications, they are as follows: observations of L-dips constitute a very accurate method to measure the electron density in plasmas—a method that does not require knowledge of the electron temperature. L-dips also allow measuring the amplitude of the electric field of Langmuir waves—the only spectroscopic method available for this purpose. Observations of X-dips provide an opportunity to determine rate coefficient of charge exchange between multi-charged ions. This is an important reference data, virtually inaccessible by other experimental methods. The rate coefficients of charge exchange are important for magnetic fusion in Tokamaks, for population inversion in the soft x-ray and VUV ranges, for ion storage devices, as well as for astrophysics (e.g., for the solar plasma and for determining the physical state of planetary nebulae.

  13. Lightning Strike in Pregnancy With Fetal Injury. (United States)

    Galster, Kellen; Hodnick, Ryan; Berkeley, Ross P


    Injuries from lightning strikes are an infrequent occurrence, and are only rarely noted to involve pregnant victims. Only 13 cases of lightning strike in pregnancy have been previously described in the medical literature, along with 7 additional cases discovered within news media reports. This case report presents a novel case of lightning-associated injury in a patient in the third trimester of pregnancy, resulting in fetal ischemic brain injury and long-term morbidity, and reviews the mechanics of lightning strikes along with common injury patterns of which emergency providers should be aware. Copyright © 2016 Wilderness Medical Society. Published by Elsevier Inc. All rights reserved.

  14. Protocol for the microbial degradation of coumaphos from cattle dip

    International Nuclear Information System (INIS)

    Mulbry, W.; Karns, J.


    Insecticide wastes generated from livestock dipping operations are well suited for biodegradation processes since these wastes are concentrated, contained, and have no other significant toxic components. About 400,000 L of cattle dip wastes containing approximately 1500 mg/L of the organophosphate coumaphos are generated yearly along the Mexican border from a USDA program designed to control disease carrying cattle ticks. Use of unlined evaporation pits for the disposal of these wastes has resulted in highly contaminated soils underlying these sites. Previous work has shown that microbial consortia present in selected dip wastes can be induced to mineralize coumaphos. Our laboratory results show that these consortia are able to colonize plastic fibers in trickling biofilters and can be used in these filters to quickly metabolize coumaphos from dip wastes. A field scale biofilter capable of treating 15,000 litre batches of dip waste was used to reduce the coumaphos concentration in two successive 11,000 litre batch trials from 2000 mg/L to 10 mg/L in approximately 14 d. (author)

  15. Expeditionary Strike Group: Command Structure Design Support

    National Research Council Canada - National Science Library

    Hutchins, Susan G; Kemple, William G; Kleinman, David L; Hocevar, Susan P


    An Expeditionary Strike Group (ESG) is a new capability mix that combines the combat power of three surface combatants and one submarine with an Amphibious Readiness Group/ Marine Expeditionary Unit...

  16. The Chicago Teachers Strike and Its Public (United States)

    Shuffelton, Amy B.


    This article considers the 2012 Chicago Teachers Strike in light of John Dewey's "The Public and Its Problems." It engages Dewey's conceptualization of practical reason to challenge the educational reform movement's commitment to technocratic decision-making.

  17. Strikes in the public sector in Denmark

    DEFF Research Database (Denmark)

    Scheuer, Steen; Ibsen, Flemming; Høgedahl, Laust


    This article looks at strikes by employees in the public sector, discusses the theoretical background to these conflicts and shows – based on a case study of three strikes in the Danish public sector – how different union strategies lead to very different outcomes in terms of economic gains......, while public sector unions trying to move up the wage hierarchy cannot expect much help from fellow public sector unions, often quite the reverse....

  18. Optimal and Suboptimal Finger Selection Algorithms for MMSE Rake Receivers in Impulse Radio Ultra-Wideband Systems

    Directory of Open Access Journals (Sweden)

    Chiang Mung


    Full Text Available The problem of choosing the optimal multipath components to be employed at a minimum mean square error (MMSE selective Rake receiver is considered for an impulse radio ultra-wideband system. First, the optimal finger selection problem is formulated as an integer programming problem with a nonconvex objective function. Then, the objective function is approximated by a convex function and the integer programming problem is solved by means of constraint relaxation techniques. The proposed algorithms are suboptimal due to the approximate objective function and the constraint relaxation steps. However, they perform better than the conventional finger selection algorithm, which is suboptimal since it ignores the correlation between multipath components, and they can get quite close to the optimal scheme that cannot be implemented in practice due to its complexity. In addition to the convex relaxation techniques, a genetic-algorithm- (GA- based approach is proposed, which does not need any approximations or integer relaxations. This iterative algorithm is based on the direct evaluation of the objective function, and can achieve near-optimal performance with a reasonable number of iterations. Simulation results are presented to compare the performance of the proposed finger selection algorithms with that of the conventional and the optimal schemes.

  19. A case study of an erosion control practice: the broad-based dip (United States)

    Kevin Bold; Pamela Edwards; Karl Williard


    In 2006, 19 gravel haul roads with broad-based dips within the Monongahela National Forest were examined to determine if those dips adhered to Forest specifications for cut depth and dip outslope. Data on the azimuth, contributing road lengths, slopes of the contributing lengths, landscape position of the dip, and soil texture of the road bed materials also were...

  20. Environmental assessment of the hot-dip galvanization processes

    Directory of Open Access Journals (Sweden)

    T. Karkoszka


    Full Text Available Processes of the hot-dip galvanization, refraining from application of dangerous chemical substances together with the necessity of ensuring the high temperatures, both pose a special threat to the environment. Therefore, the subject of analysis was environmental impact of the hot-dip galvanization process. Here has been done the identification and the assessment of the environmental aspects as well as has been pointed at the key-aspects requiring the special supervision. The developed assessment methodology can be applied by each of the organization wanting to master the processes by minimizing their environmental influence.

  1. Impact of the slab dip change onto the deformation partitioning in the northern Lesser Antilles oblique subduction zone (Antigua-Virgin Islands) (United States)

    Laurencin, Muriel; Marcaillou, Boris; Klingelhoefer, Frauke; Graindorge, David; Lebrun, Jean-Frédéric; Laigle, Mireille; Lallemand, Serge


    Marine geophysical cruises Antithesis (2013-2016) investigate the impact of the variations in interplate geometry onto margin tectonic deformation along the strongly oblique Lesser Antilles subduction zone. A striking features of this margin is the drastic increase in earthquake number from the quiet Barbuda-St Martin segment to the Virgin Islands platform. Wide-angle seismic data highlight a northward shallowing of the downgoing plate: in a 150 km distance from the deformation front, the slab dipping angle in the convergence direction decreases from 12° offshore of Antigua Island to 7° offshore of Virgin Islands. North-South wide-angle seismic line substantiates a drastic slab-dip change that likely causes this northward shallowing. This dip change is located beneath the southern tip of the Virgin Islands platform where the Anegada Passage entails the upper plate. Based on deep seismic lines and bathymetric data, the Anegada Passage is a 450 km long W-E trending set of pull-apart basins and strike-slip faults that extends from the Lesser Antilles accretionary prism to Puerto Rico. The newly observed sedimentary architecture within pull-apart Sombrero and Malliwana basins indicates a polyphased tectonic history. A past prominent NW-SE extensive to transtensive phase, possibly related to the Bahamas Bank collision, opened the Anegada Passage as previously published. Transpressive tectonic evidences indicate that these structures have been recently reactivated in an en-echelon sinistral strike-slip system. The interpreted strain ellipsoid is consistent with deformation partitioning. We propose that the slab northward shallowing increases the interplate coupling and the seismic activity beneath the Virgin Islands platform comparatively to the quiet Barbuda-St Martin segment. It is noteworthy that the major tectonic partitioning structure in the Lesser Antilles forearc is located above the slab dip change where the interplate seismic coupling increases.

  2. Effect of Rake Angle on Stress, Strain and Temperature on the Edge of Carbide Cutting Tool in Orthogonal Cutting Using FEM Simulation

    Directory of Open Access Journals (Sweden)

    Hendri Yanda


    Full Text Available Demand for higher productivity and good quality for machining parts has encourage many researchers to study the effects of machining parameters using FEM simulation using either two or three dimensions version. These are due to advantages such as software package and computational times are required. Experimental work is very costly, time consuming and labor intensive. The present work aims to simulate a three-dimensional orthogonal cutting operations using FEM software (Deform-3D to study the effects of rake angle on the cutting force, effective stress, strain and temperature on the edge of carbide cutting tool. There were seven runs of simulations. All simulations were performed for various rake angles of -15 deg, -10 deg, -5 deg, 0 deg, +5 deg, +10 deg, and +15 deg. The cutting speed, feed rate and depth of cut (DOC were kept constant at 100 m/min, 0.35 mm/rev and 0.3 mm respectively. The work piece used was ductile cast iron FCD500 grade and the cutting tool was DNMA432 series (tungsten, uncoated carbide tool, SCEA = 0; and radius angle 55 deg. The analysis of results show that, the increase in the rake angle from negative to positive angle, causing the decrease in cutting force, effective stress and total Von Misses strain. The minimum of the cutting force, effective stress and total Von Misses strain were obtained at rake angle of +15 deg. Increasing the rake caused higher temperature generated on the edge of carbide cutting tool and resulted in bigger contact area between the clearance face and the workpiece, consequently caused more friction and wear. The biggest deformation was occurred in the primary deformation zone, followed by the secondary deformation zone. The highest stress was also occurred in the primary deformation zone. But the highest temperature on the chip usually occurs in secondary deformation zone, especially in the sliding region, because the heat that was generated in the sticking region increased as the workpiece was

  3. Women, transition and strikes in Serbia

    Directory of Open Access Journals (Sweden)

    Novaković Nada G.


    Full Text Available The author, in a sociological way, describes and analyzes the concepts of transition, privatization and strikes in Serbia, particularly the place of women in it. It examines the most important economic and social causes and consequences of these phenomena. The main hypothesis is: women's strikes in the Serbian transition are less efficient than strikes and public protests of women in the developed world and the second Yugoslavia. A strike is a class conflict, in which the workers are fighting for their social and economic rights, threatened by the capitalist class. Elites in government and state authorities protect the interests of big capital at the detriment of the interests of the majority of workers. Exploring women's strikes in transition reveals the nature of the social and political system. Their strikes in enterprises, the blocking of public spaces and public protests are systemic, ie. class determined. As the transition was very fast, the resistance of the strikers was inefficient, and the protests of women became an expression of desperation against the loss of jobs and basic resources for lifehood. In short, this research is about the main causes, the organizational forms and the consequences of strikes in which the majority were women. For this purpose, the author chose to describe an array of strikes in the industries and the companies where women are most employed. The choice of strikes in the economic sector is not accidental, but a consequence of the fact that the women there were the most vulnerable. Women in public institutions and companies had much higher financial and social position. They are less likely to strike and publicly protested. After 2000, these strikes were more successful than worker's strikes in textile, food processing, manufacturing and trade. Relationship between the government and the public towards them was tainted by self-interest and selective. The main criterion for the selection of companies and

  4. Strain pattern of the Southern Tyrrhenian slab from moment tensors of deep earthquakes: implications on the down-dip velocity

    Directory of Open Access Journals (Sweden)

    G. Selvaggi


    Full Text Available Seismic strain is analysed along the slab face of the Southern Tyrrhenian subduction zone using focal mechanisms of deep earthquakes which occurred in the period 1960-1998. Results show that the slab is mostly affected by down-dip shortening which strongly increases below 250 km depth. Extensional strain is mainly confined to the direction perpendicular to the slab face. The dominance of down-dip shortening and the minor along strike inplane extension implies thickening of the slab below 250 km depth. Assuming constant seismic efficiency along the slab, this strain pattern also implies a decrease of the down-dip velocity below 250 km depth. We also locate lower magnitude intermediate-depth and deep earthquakes using arrival times since 1985 available from the Italian seismic national network. These data show that the slab reaches the deeper part of the upper mantle, as suggested by the occurrence of a few ??600 km depth earthquakes, and that a large portion of the Tyrrhenian slab, between 100 and 250 km depth beneath the offshore of the Calabrian arc, is aseismic. Only a short part of the Tyrrhenian slab is seismically continuous from the top to the bottom. The lack of seismicity may indicate either that aseismic subduction is occurring or that the slab is detached from its upper part. Although the data are still inconclusive, they suggest that an aseismic subduction is the most appropriate interpretation, considering recent tomographic images of the slab and the results of this study, which agree well with the presence of a neutral down-dip stress zone, as also observed worldwide in deep slabs.

  5. Active and recent strike-slip tectonics (United States)

    Nur, Amos; Boccaletti, Mario

    An international workshop cosponsored by the Department of Geology, University of Florence, Italy and the Department of Geophysics, Stanford University, Stanford, Calif., was held in Florence, Italy, April 18-20, 1989,on the topic of active and recent strike-slip tectonics in the continental crust. Workshop participants from Turkey, Ethiopia, Israel, Greece, and various universities in Italy, Spain, West Germany, France, the United Kingdom, Brazil, and the United States reported on a broad range of studies involving strike-slip faulting in continental crustal setting. As it turned out, much of the work reported on involved aspects of strike-slip faulting that are only poorly understood, especially crustal deformation, which is distributed over a multiplicity of faults, or even fault domains.One of the rewarding aspects of this workshop was the diversity of geographic areas and geological settings covered by the reporters. The north and east Anatolian faults, the Dead Sea transform zone, western Turkey, north and central Greece, Malta, Sicily, southern Italy, the bethic Cordillera in southern Spain, Tunisia, Tibet and southwest China, offshore Brazil, Alaska, Nevada, and California. A recurring observation reported for all those areas was mixed mode faulting, i.e., the coterminous or sequential occurrence of strike-slip and normal faulting, or strike-slip and thrust, and in many instances also strikeslip, normal and thrust faulting in a single tectonic setting.

  6. Impact of the Voltage Dips in Shipboard Microgrid Power Systems

    DEFF Research Database (Denmark)

    Liu, Wenzhao; Guerrero, Josep M.; Savaghebi, Mehdi


    Voltage and frequency transient variations are the most common power quality issues in a ship microgrid system. In this paper, the impacts of the voltage dips induced by the sudden-load of ballast pump are analyzed in detail for the ship power systems. Several relevant ship power quality standards...

  7. Deformation modeling and the strain transient dip test

    International Nuclear Information System (INIS)

    Jones, W.B.; Rohde, R.W.; Swearengen, J.C.


    Recent efforts in material deformation modeling reveal a trend toward unifying creep and plasticity with a single rate-dependent formulation. While such models can describe actual material deformation, most require a number of different experiments to generate model parameter information. Recently, however, a new model has been proposed in which most of the requisite constants may be found by examining creep transients brought about through abrupt changes in creep stress (strain transient dip test). The critical measurement in this test is the absence of a resolvable creep rate after a stress drop. As a consequence, the result is extraordinarily sensitive to strain resolution as well as machine mechanical response. This paper presents the design of a machine in which these spurious effects have been minimized and discusses the nature of the strain transient dip test using the example of aluminum. It is concluded that the strain transient dip test is not useful as the primary test for verifying any micromechanical model of deformation. Nevertheless, if a model can be developed which is verifiable by other experimentts, data from a dip test machine may be used to generate model parameters

  8. 9 CFR 73.10 - Permitted dips; substances allowed. (United States)


    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Permitted dips; substances allowed. 73.10 Section 73.10 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT... flowers of sulphur or sulphur flour to 100 gallons of water; or a specifically permitted proprietary brand...

  9. Dipping Strawberry Plants in Fungicides before Planting to Control Anthracnose

    Directory of Open Access Journals (Sweden)

    Myeong Hyeon Nam


    Full Text Available Anthracnose crown rot (ACR, caused by Colletotrichum fructicola, is a serious disease of strawberry in Korea. The primary inoculums of ACR were symptomless strawberry plants, plant debris, and other host plants. To effectively control anthracnose in symptomless transplanted strawberries, it is necessary to use diseasefree plants, detect the disease early, and apply a fungicide. Therefore, in 2010 and 2011, we evaluated the efficacy of pre-plant fungicide dips by using strawberry transplants infected by C. fructicola for the control of anthracnose. Dipping plants in prochloraz-Mn for 10 min before planting was most effective for controlling anthracnose in symptomless strawberry plants and resulted in more than 76% control efficacy. Azoxystrobin showed a control efficacy of over 40%, but plants treated with pyraclostrobin, mancozeb and iminoctadine tris showed high disease severity. The control efficacy of the dip treatment with prochloraz-Mn did not differ with temperature and time. Treatment with prochloraz-Mn for more than an hour caused growth suppression in strawberry plants. Therefore, the development of anthracnose can be effectively reduced by dipping strawberry plants for 10 min in prochloraz-Mn before planting.

  10. Dip-coated hydrotungstite thin films as humidity sensors

    Indian Academy of Sciences (India)

    Thin films of a hydrated phase of tungsten oxide, viz. hydrotungstite, have been prepared on glass substrates by dip-coating method using ammonium tungstate precursor solution. X-ray diffraction shows the films to have a strong -axis orientation. The resistance of the films is observed to be sensitive to the humidity content ...

  11. Dip-coated hydrotungstite thin films as humidity sensors

    Indian Academy of Sciences (India)


    Dip-coated hydrotungstite thin films as humidity sensors. G V KUNTE, UJWALA AIL, S A SHIVASHANKAR and A M UMARJI*. Materials Research Centre, Indian Institute of Science, Bangalore 560 012, India. MS received 6 December 2004; revised 28 February 2005. Abstract. Thin films of a hydrated phase of tungsten ...

  12. Novel dip-pen nanolithography strategies for nanopatterning

    NARCIS (Netherlands)

    Wu, C.C.


    Dip-pen nanolithography (DPN) is an atomic force microscopy (AFM)-based lithography technique offering the possibility of fabricating patterns with feature sizes ranging from micrometers to tens of nanometers, utilizing either top-down or bottom-up strategies. Although during its early development

  13. ELMs, strike point jumps and SOL currents

    International Nuclear Information System (INIS)

    Solano, Emilia R.; Jachmich, S.; Villone, F.; Hawkes, N.; Guenther, K.; Korotkov, A.; Stamp, M.; Andrew, P.; Conboy, J.; Mattews, G.F.; Corre, Y.; Loarte, A.; Pitts, R.A.; Cenedese, A.; Kempenaars, M.; Bolzonella, T.; Rachlew, E.


    Plasma equilibria before and after ELMs in JET are investigated. ELMs could be associated with fragile equilibria and separatrix instabilities: previously closed field lines would open up, releasing plasma current and leading to the formation of a new, smaller separatrix. This model could explain experimental observations of sudden jumps and shifts in strike point positions. Novel instability mechanisms are discussed to explain the large transient jumps observed in the strike point position: positive X-point instability, due to positive toroidal current density at the X-point and diamagnetic instability, due to negative inboard toroidal current density. (author)

  14. Strikes, solidarity and scabs. Union members participation norms and williengness to participate in strikes.

    NARCIS (Netherlands)

    Akkerman, A.; Born, M.; Torenvlied, R.


    This article studies how participation norms affect workers' willingness to strike. A factor analysis on the responses of 468 Dutch union members about appropriate behavior during a strike produces two factors. The first factor reflects a "solidarity norm" favoring group solidarity; the second

  15. Magmatic control along a strike-slip volcanic arc: The central Aeolian arc (Italy)

    KAUST Repository

    Ruch, Joel


    The regional stress field in volcanic areas may be overprinted by that produced by magmatic activity, promoting volcanism and faulting. In particular, in strike-slip settings, the definition of the relationships between the regional stress field and magmatic activity remains elusive. To better understand these relationships, we collected stratigraphic, volcanic and structural field data along the strike-slip Central Aeolian arc (Italy): here the islands of Lipari and Vulcano separate the extensional portion of the arc (to the east) from the contractional one (to the west). We collected >500 measurements of faults, extension fractures and dikes at 40 sites. Most structures are NNE-SSW to NNW-SSE oriented, eastward dipping, and show almost pure dip-slip motion; consistent with an E-W extension direction, with minor dextral and sinistral shear. Our data highlight six eruptive periods during the last 55 ka, which allow considering both islands as a single magmatic system, in which tectonic and magmatic activity steadily migrated eastward and currently focus on a 10 km long x 2 km wide active segment. Faulting appears to mostly occur in temporal and spatial relation with magmatic events, supporting that most of the observable deformation derives from transient magmatic activity (shorter-term, days to months), rather than from steady longer-term regional tectonics (102-104 years). More in general, the Central Aeolian case shows how magmatic activity may affect the structure and evolution of volcanic arcs, overprinting any strike-slip motion with magma-induced extension at the surface.

  16. Simulating the Risk of Bird Strikes

    NARCIS (Netherlands)

    Metz, I.C.; Ellerbroek, J.; Muhlhausen, Thorsten; Kügler, D.; Hoekstra, J.M.


    This paper presents a fast-time simulation environment for assessing the risk of bird strikes in aviation. An existing air traffic simulator was enhanced in order to simulate air and bird traffic simultaneously and to recognize collisions between birds and aircraft. Furthermore, a method was

  17. The Front Line: No Strikes, Just Balls. (United States)

    Unks, Gerald


    Recent actions of British teachers suggest an alternative to the teacher strike. Those teachers dramatically demonstrated their grievances by withholding the voluntary extra services they customarily perform. American teachers could accomplish the same end by collectively refusing to perform extraneous administrative services: collecting money,…

  18. When Lightning Strikes a Second Time (United States)

    Allen, Kent


    The chances of lightning striking twice are infinitesimal, at best. What are the odds, in middle age, of being struck with a jarring bolt of figurative lightning, then a few months later being an eyewitness as the same sizzle in the sky jolts a group of students--those decision-makers of tomorrow? The author describes two experiences that proved…

  19. Impact of lightning strikes on hospital functions. (United States)

    Mortelmans, Luc J M; Van Springel, Gert L J; Van Boxstael, Sam; Herrijgers, Jan; Hoflacks, Stefaan


    Two regional hospitals were struck by lightning during a one-month period. The first hospital, which had 236 beds, suffered a direct strike to the building. This resulted in a direct spread of the power peak and temporary failure of the standard power supply. The principle problems, after restoring standard power supply, were with the fire alarm system and peripheral network connections in the digital radiology systems. No direct impact on the hardware could be found. Restarting the servers resolved all problems. The second hospital, which had 436 beds, had a lightning strike on the premises and mainly experienced problems due to induction. All affected installations had a cable connection from outside in one way or another. The power supplies never were endangered. The main problem was the failure of different communication systems (telephone, radio, intercom, fire alarm system). Also, the electronic entrance control went out. During the days after the lightening strike, multiple software problems became apparent, as well as failures of the network connections controlling the technical support systems. There are very few ways to prepare for induction problems. The use of fiber-optic networks can limit damage. To the knowledge of the authors, these are the first cases of lightning striking hospitals in medical literature.

  20. [Management of the hunger strike in prison]. (United States)

    Fayeulle, Stéphanie; Renou, Frédéric; Protais, Emmanuel; Hédouin, Valéry; Wartel, Guillaume; Yvin, Jean-Luc


    Entering prison can feed pre-existent behavior of demands or generate them. Several means of expression are then used. Hunger strike is an average privileged act. It belongs to prison culture. Estimate how practitioners working in prison take care of the hunger strikers. The study, realised in 2008, was led with all the Units of Consultations and Ambulatory Care in France. It is a declarative investigation where a medical testimony by unit was asked. From 174 "maisons d'arrêt" and establishments for punishment in France, 95 answers were obtained. This situation was already seen by 98,8% of the doctors. The motives for hunger strike were mainly judicial for "maisons d'arrêt" (70,1%) and prison motives for detention centers (68,7%). Mainly, doctors opted for a neutral attitude (63% of the cases). The hunger strikes were mostly brief (less than a week in 85% of the cases). Only 5,5% of the doctors proposed written information concerning the risks incurred during a fast. A doctor in 4 approximately (23%) was already witness to complications due to fasting. The fact that a patient may refuse care makes the medical approach difficult. Faced with such a situation, 45% of the doctors privileged their duty of care, 28% respected the patient's wishes, and 27% did not pronounce. From a therapeutic point of view, the place of treatment using vitamins was rarely recognized (32,7%). Hunger strike is rarely severe, but it is rather frequent in prison so that every doctor working there will be confronted with it. The refeeding syndrome seems often ignored. The coverage of hunger strike is governed by the law, but ethical questions stay in the appreciation of every doctor. Copyright © 2010 Elsevier Masson SAS. All rights reserved.

  1. Development of procedures to stabilize chlorfenvinphos in model cattle dips

    Energy Technology Data Exchange (ETDEWEB)

    Caceres, Tanya [Pontificia Universidad Catolica del Ecuador, Quito (Ecuador). Dept. de Biologia; University of South Australia (Australia). Centre for Environmental Risk Assessment and Remediation (CERAR); E-mail:; Pastor, Yolanda; Merino, Ramiro [Comision Ecuatoriana de Energia Atomica, Quito (Ecuador). Dept. de Ecotoxicologia


    The environmental fate and dissipation of the acaricide chlorfenvinphos was studied in water and sediment in model cattle dips with monthly recharge and without monthly recharge. Chlorfenvinphos concentration decreased with time in both model dips and the monthly recharge at 10% of the initial concentration was inefficient to maintain the right concentration which would be effective for tick control. Volatilization was the principal factor that influenced the dissipation of the pesticide. The sediment bound residues increased with time. Mineralization of {sup 14}C- chlorfenvinphos due to microbial activity showed that the {sup 14}CO{sub 2} production increased with time in biometers flasks with different amounts of sediment. 2,4 - dichloroacetophenone, and 2,4-dichlorobenzaldehyde were identified as degradation products. Isomerization of chlorfenvinphos from isomer Z to E was influenced by sunlight and it affected the efficiency of the pesticide as Z isomer is more active on tick control than E isomer. (author)

  2. Gait Retraining From Rearfoot Strike to Forefoot Strike does not change Running Economy. (United States)

    Roper, Jenevieve Lynn; Doerfler, Deborah; Kravitz, Len; Dufek, Janet S; Mermier, Christine


    Gait retraining is a method for management of patellofemoral pain, which is a common ailment among recreational runners. The present study investigated the effects of gait retraining from rearfoot strike to forefoot strike on running economy, heart rate, and respiratory exchange ratio immediately post-retraining and one-month post-retraining in recreational runners with patellofemoral pain. Knee pain was also measured. Sixteen participants (n=16) were randomly placed in the control (n=8) or experimental (n=8) group. A 10-minute treadmill RE test was performed by all subjects. The experimental group performed eight gait retraining running sessions where foot strike pattern was switched from rearfoot strike to forefoot strike, while the control group received no intervention. There were no significant differences for running economy (p=0.26), respiratory exchange ratio (p=0.258), or heart rate (p=0.248) between the groups. Knee pain reported on a visual analog scale was also significantly reduced (p<0.05) as a result of retraining. The present study demonstrates that retraining from rearfoot strike to forefoot strike did not affect running economy up to one-month post-retraining while reducing running-related patellofemoral pain. © Georg Thieme Verlag KG Stuttgart · New York.

  3. Thermoplastic polymers surfaces for Dip-Pen Nanolithography of oligonucleotides

    Energy Technology Data Exchange (ETDEWEB)

    Suriano, Raffaella [Dipartimento di Chimica, Materiali e Ingegneria Chimica “Giulio Natta”, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano (Italy); Biella, Serena, E-mail: [Dipartimento di Chimica, Materiali e Ingegneria Chimica “Giulio Natta”, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano (Italy); Cesura, Federico; Levi, Marinella; Turri, Stefano [Dipartimento di Chimica, Materiali e Ingegneria Chimica “Giulio Natta”, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano (Italy)


    Different thermoplastic polymers were spin-coated to prepare smooth surfaces for the direct deposition of end-group modified oligonucleotides by Dip-Pen Nanolithography. A study of the diffusion process was done in order to investigate the dependence of calibration coefficient and quality of deposited features on environmental parameters (temperature, relative humidity) and ink's molecular weight and functionality. The optimization of the process parameters led to the realization of high quality and density nanoarrays on plastics.

  4. Parametric cost model for solar space power and DIPS systems

    International Nuclear Information System (INIS)

    Meisl, C.J.


    A detailed cost model has been developed to parametrically determine the program development and production cost of (1) photovoltaic, (2) solar dynamic and (3) dynamic isotope (DIPS) space power systems. The model is applicable in the net electrical power range of 3 to 300 kWe for solar power, and 0.5 to 10 kWe for DIPS. Application of the cost model allows spacecraft or space-based power system architecture and design trade studies or budgetary forecasting and cost benefit analyses. The cost model considers all major power subsystems (i.e., power generation, power conversion, energy storage, thermal management, and power management/distribution/control). It also considers system cost effects such as integration, testing, management, etc. The cost breakdown structure, model assumptions, ground rules, bases, Cost Estimation Relationship (CER) format and rationale are presented, and the application of the cost model to 100-kWe solar space power plants and to a 1.0-kWe DIPS are demonstrated

  5. Phase Transformation of Hot Dipped Aluminium during High Temperature Oxidation

    International Nuclear Information System (INIS)

    Zaifol Samsu; Muhammad Daud; Hishamuddin Husain; Mohd Saari Ripin; Rusni Rejab; Zaiton Selamat; Mohd Shariff Sattar


    Low alloy carbon steel was coated by hot-dipping into a molten aluminum bath. Isothermal oxidations were carried out at 750 degree Celsius in static air to study the oxidation behaviour of the hot-dipped aluminide steel. The phase transformation in the aluminide layer during diffusion at 750 degree Celsius in static air was analyzed by SEM-EDX and XRD. After hot-dip treatment, the coating layers consisted of three phases, where Al, thinner layer of FeAl 3 , and thicker layer of Fe 2 Al 5 were detected from external topcoat to the aluminide/ steel substrate. After oxidation, the Fe 2 Al 5 formed during the immersion process completely transformed to Fe 2 Al 5 , FeAl 2 , FeAl and Al-Fe(Al) phases because of the composition gradient and the chemical diffusion by oxidation. After oxidation, there are some voids were found at the coating/ substrate interface due to the rapid inter-diffusion of iron and aluminium during oxidation. The FeAl phase kept growing with increasing exposure time at 750 degree Celsius, while the Fe 2 Al 5 was consumed during oxidation. After 168 hrs oxidation, the Fe 2 Al 5 phase was going disappeared as the aluminum layer was consumed. (author)

  6. Experimental Modeling of Dynamic Shallow Dip-Slip Faulting (United States)

    Uenishi, K.


    In our earlier study (AGU 2005, SSJ 2005, JPGU 2006), using a finite difference technique, we have conducted some numerical simulations related to the source dynamics of shallow dip-slip earthquakes, and suggested the possibility of the existence of corner waves, i.e., shear waves that carry concentrated kinematic energy and generate extremely strong particle motions on the hanging wall of a nonvertical fault. In the numerical models, a dip-slip fault is located in a two-dimensional, monolithic linear elastic half space, and the fault plane dips either vertically or 45 degrees. We have investigated the seismic wave field radiated by crack-like rupture of this straight fault. If the fault rupture, initiated at depth, arrests just below or reaches the free surface, four Rayleigh-type pulses are generated: two propagating along the free surface into the opposite directions to the far field, the other two moving back along the ruptured fault surface (interface) downwards into depth. These downward interface pulses may largely control the stopping phase of the dynamic rupture, and in the case the fault plane is inclined, on the hanging wall the interface pulse and the outward-moving Rayleigh surface pulse interact with each other and the corner wave is induced. On the footwall, the ground motion is dominated simply by the weaker Rayleigh pulse propagating along the free surface because of much smaller interaction between this Rayleigh and the interface pulse. The generation of the downward interface pulses and corner wave may play a crucial role in understanding the effects of the geometrical asymmetry on the strong motion induced by shallow dip-slip faulting, but it has not been well recognized so far, partly because those waves are not expected for a fault that is located and ruptures only at depth. However, the seismological recordings of the 1999 Chi-Chi, Taiwan, the 2004 Niigata-ken Chuetsu, Japan, earthquakes as well as a more recent one in Iwate-Miyagi Inland

  7. ["Bell-striking" Saying of Acupuncture Therapy]. (United States)

    Zhao, Jing-Sheng


    As an analogy, a prototype of "bell-striking" is proposed in the present paper for exploring the basic properties, major elements, and potential mechanisms of acupuncture stimulation. On the strength of analysis on the physiological basis of acupuncture effect, several fundamental aspects of acupuncture are summarized as a) the body-surface stimulating characters, b) general and local effects, and c) triggering the auto-regulative function of the organism, which mimics the "bell-striking" response. Namely, when stroke, bell will chime, otherwise, chiming will not be heard. During analyzing special contents of acupuncture theory, its formative background should not be separated, and it is improper to take, modern medical theory of the human body as the guiding thinking way for researching the ancient Chinese medical literature.

  8. Central hyperadrenergic state after lightning strike. (United States)

    Parsaik, Ajay K; Ahlskog, J Eric; Singer, Wolfgang; Gelfman, Russell; Sheldon, Seth H; Seime, Richard J; Craft, Jennifer M; Staab, Jeffrey P; Kantor, Birgit; Low, Phillip A


    To describe and review autonomic complications of lightning strike. Case report and laboratory data including autonomic function tests in a subject who was struck by lightning. A 24-year-old man was struck by lightning. Following that, he developed dysautonomia, with persistent inappropriate sinus tachycardia and autonomic storms, as well as posttraumatic stress disorder (PTSD) and functional neurologic problems. The combination of persistent sinus tachycardia and episodic exacerbations associated with hypertension, diaphoresis, and agitation was highly suggestive of a central hyperadrenergic state with superimposed autonomic storms. Whether the additional PTSD and functional neurologic deficits were due to a direct effect of the lightning strike on the central nervous system or a secondary response is open to speculation.

  9. Improving work conditions through strike: Examination of nurses' attitudes through perceptions of two physician strikes in Israel. (United States)

    Gafni-Lachter, Liat; Admi, Hanna; Eilon, Yael; Lachter, Jesse


    Strikes are means to influence policies related to working conditions, yet raise ethical dilemmas for healthcare workers. Nurse strikes have become more prominent around the world. To assess the change in Israeli nurses' attitudes towards strikes in light of two physician strikes that have preceded a nursing strike. An anonymous survey was administered once in 2000 (N = 106) and again in 2011 (n = 175) following 110 days of a physician strike, to assess nurses' attitudes towards the strike and resulting ethical issues. A statistically significant change (p working conditions related to professional and public health agendas.

  10. Stress distribution of metatarsals during forefoot strike versus rearfoot strike: A finite element study. (United States)

    Li, Shudong; Zhang, Yan; Gu, Yaodong; Ren, James


    Due to the limitations of experimental approaches, comparison of the internal deformation and stresses of the human man foot between forefoot and rearfoot landing is not fully established. The objective of this work is to develop an effective FE modelling approach to comparatively study the stresses and energy in the foot during forefoot strike (FS) and rearfoot strike (RS). The stress level and rate of stress increase in the Metatarsals are established and the injury risk between these two landing styles is evaluated and discussed. A detailed subject specific FE foot model is developed and validated. A hexahedral dominated meshing scheme was applied on the surface of the foot bones and skin. An explicit solver (Abaqus/Explicit) was used to stimulate the transient landing process. The deformation and internal energy of the foot and stresses in the metatarsals are comparatively investigated. The results for forefoot strike tests showed an overall higher average stress level in the metatarsals during the entire landing cycle than that for rearfoot strike. The increase rate of the metatarsal stress from the 0.5 body weight (BW) to 2 BW load point is 30.76% for forefoot strike and 21.39% for rearfoot strike. The maximum rate of stress increase among the five metatarsals is observed on the 1st metatarsal in both landing modes. The results indicate that high stress level during forefoot landing phase may increase potential of metatarsal injuries. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Psychosocial Correlates of Nocturnal Blood Pressure Dipping in African Americans: The Jackson Heart Study

    NARCIS (Netherlands)

    Spruill, Tanya M.; Shallcross, Amanda J.; Ogedegbe, Gbenga; Chaplin, William F.; Butler, Mark; Palfrey, Amy; Shimbo, Daichi; Muntner, Paul; Sims, Mario; Sarpong, Daniel F.; Agyemang, Charles; Ravenell, Joseph


    African Americans exhibit a lower degree of nocturnal blood pressure (BP) dipping compared with Whites, but the reasons for reduced BP dipping in this group are not fully understood. The aim of this study was to identify psychosocial factors associated with BP dipping in a population-based cohort of

  12. 29 CFR 1910.124 - General requirements for dipping and coating operations. (United States)


    ... 29 Labor 5 2010-07-01 2010-07-01 false General requirements for dipping and coating operations... Dipping and Coating Operations § 1910.124 General requirements for dipping and coating operations. (a... coating operation using flammable or combustible liquids is: (i) Free of any solid particulate that poses...

  13. Reduction of teat skin mastitis pathogen loads: differences between strains, dips, and contact times. (United States)

    Enger, B D; Fox, L K; Gay, J M; Johnson, K A


    The purpose of these experiments was to (1) assess differences in mastitis pathogen strain sensitivities to teat disinfectants (teat dips), and (2) determine the optimum time for premilking teat dips to remain in contact with teat skin to reduce pathogen loads on teat skin. Two experiments were conducted using the excised teat model. In experiment 1, the differences in mastitis pathogen strain sensitivities to 4 commercially available dips (dip A: 1% H2O2; dip B: 1% chlorine dioxide; dip C: 1% iodophor; and dip D: 0.5% iodophor) were evaluated. Four strains of 11 common mastitis pathogens (Staphylococcus aureus, Streptococcus agalactiae, Mycoplasma bovis, Streptococcus dysgalactiae, Streptococcus uberis, Escherichia coli, Staphylococcus chromogenes, Staphylococcus epidermidis, Staphylococcus hyicus, Staphylococcus xylosus, and Staphylococcus haemolyticus) were tested. In experiment 2, the percentage log reduction of mastitis pathogens (Escherichia coli, Streptococcus uberis, Streptococcus dysgalactiae, Klebsiella species, Staphylococcus chromogenes, Staphylococcus haemolyticus, Staphylococcus xylosus, and Staphylococcus epidermidis) on teat skin with 3 commercially available teat dips: dip A; dip D; and dip E: 0.25% iodophor, using dip contact times of 15, 30, and 45 s, was evaluated. Experiment 1 results indicated significant differences in strain sensitivities to dips within pathogen species: Staphylococcus aureus, Staphylococcus chromogenes, and Streptococcus uberis. Species differences were also found where Mycoplasma bovis (97.9% log reduction) was the most sensitive to tested teat dips and Staphylococcus haemolyticus (71.4% log reduction) the most resistant. Experiment 2 results indicated that contact times of 30 and 45 s were equally effective in reducing recovered bacteria for dips D and E and were also significantly more effective than a 15-s contact time. No differences were seen in recovered bacteria between tested contact times after treatment with dip

  14. Dipping-interface mapping using mode-separated Rayleigh waves (United States)

    Luo, Y.; Xia, J.; Xu, Y.; Zeng, C.; Miller, R.D.; Liu, Q.


    Multichannel analysis of surface waves (MASW) method is a non-invasive geophysical technique that uses the dispersive characteristic of Rayleigh waves to estimate a vertical shear (S)-wave velocity profile. A pseudo-2D S-wave velocity section is constructed by aligning 1D S-wave velocity profiles at the midpoint of each receiver spread that are contoured using a spatial interpolation scheme. The horizontal resolution of the section is therefore most influenced by the receiver spread length and the source interval. Based on the assumption that a dipping-layer model can be regarded as stepped flat layers, high-resolution linear Radon transform (LRT) has been proposed to image Rayleigh-wave dispersive energy and separate modes of Rayleigh waves from a multichannel record. With the mode-separation technique, therefore, a dispersion curve that possesses satisfactory accuracy can be calculated using a pair of consecutive traces within a mode-separated shot gather. In this study, using synthetic models containing a dipping layer with a slope of 5, 10, 15, 20, or 30 degrees and a real-world example, we assess the ability of using high-resolution LRT to image and separate fundamental-mode Rayleigh waves from raw surface-wave data and accuracy of dispersion curves generated by a pair of consecutive traces within a mode-separated shot gather. Results of synthetic and real-world examples demonstrate that a dipping interface with a slope smaller than 15 degrees can be successfully mapped by separated fundamental waves using high-resolution LRT. ?? Birkh??user Verlag, Basel 2009.

  15. Impedance of the PEP-II DIP screen

    Energy Technology Data Exchange (ETDEWEB)

    Ng, C.-K. [Stanford Linear Accelerator Center, Menlo Park, CA (United States); Weiland, T.


    The vacuum chamber of a storage ring normally consists of periodically spaced pumping slots. The longitudinal impedance of slots are analyzed in this paper. It is found that although the broad-band impedance is tolerable, the narrow-band impedance, as a consequence of the periodicity of the slots, may exceed the stability limit given by natural damping with no feedback system on. Based on this analysis, the PEP-II distributed-ion-pump (DIP) screen uses long grooves with hidden holes cut halfway to reduce both the broad-band and narrow-band impedances. (author)

  16. Prestack traveltimes for dip-constrained TI media

    KAUST Repository

    Golikov, Pavel


    The double-square-root (DSR) formula is an integral part of many wavefield based imaging tools. A transversely isotropic medium with a titled symmetry axis (TI) version of the DSR formula is nearly impossible to obtain analytically. As a result, we develop an approximate version of the DSR formula valid for media with the symmetry axis normal to the dip of the reflector (DTI). The accuracy of this approximate solution is enhanced using Shanks transform to a point where the errors are extremely small for practical anisotropic values. Under this assumption, we also do not need to compute the symmetry axis field as it is inherently included in the formulation.

  17. A Case Study Of Turkish Transmission System For VoltageDips

    DEFF Research Database (Denmark)

    Inan, E.; Alboyaci, B.; Bak, Claus Leth


    -duration voltage variations. The aim of this paper is to have an idea about voltage dip performance of Turkey Transmission System. Turkey's transmission system has 21 regions. For simulations, 2nd region, which includes Istanbul city's area is heavy loaded, is selected. For purposes of early warning and later...... analysis of voltage dip performance of the whole transmission system, is used to compare with results constructed fault statics from SIMPOW DIPS analysis program real data. SIMPOW DIPS software enables to calculate dip frequency for all busses and lines....

  18. Acute transient hemiparesis induced by lightning strike. (United States)

    Rahmani, Seyed Hesam; Faridaalaee, Gholamreza; Jahangard, Samira


    According to data from the National Oceanic and Atmospheric Administration,in the years from 1959 to 1994, lightning was responsible for more than 3000 deaths and nearly 10,000 casualties. The most important characteristic features of lightning injuries are multisystem involvement and widely variable severity. Lightning strikes are primarily a neurologic injury that affects all 3 components of the nervous system: central, autonomic,and peripheral. Neurologic complications of lightning strikes vary from transient benign symptoms to permanent disability. Many patients experience a temporary paralysis called keraunoparalysis. Here we reported a 22-year-old mountaineer man with complaining of left sided hemiparesis after being hit by a lightning strike in the mountain 3 hours ago. There was no loss of consciousness at hitting time. On arrival the patient was alert, awake and hemodynamically stable. In neurologic examination cranial nerves were intact, left sided upper and lower extremity muscle force was I/V with a combination of complete sensory loss, and right-sided muscle force and sensory examination were normal. There is not any evidence of significant vascular impairment in the affected extremities. Brain MRI and CT scan and cervical MRI were normal. During 2 days of admission, with intravenous hydration, heparin 5000 unit SC q12hr and physical therapy of the affected limbs, motor and sensory function improved and was normal except mild paresthesia. He was discharged 1 day later for outpatient follow up while vitamin B1 100mg orally was prescribed.Paresthesia improved after 3 days without further sequels.

  19. Lightning strike-induced brachial plexopathy

    Directory of Open Access Journals (Sweden)

    Amita N Bhargava


    Full Text Available We describe a patient who presented with a history of lightning strike injury. Following the injury, he sustained acute right upper limb weakness with pain. Clinically, the lesion was located to the upper and middle trunk of the right brachial plexus, and the same confirmed with electrophysiological studies. Nerve damage due to lightning injuries is considered very rare, and a plexus damage has been described infrequently, if ever. Thus, the proposed hypothesis that lightning rarely causes neuropathy, as against high-voltage electric current, due to its shorter duration of exposure not causing severe burns which lead to nerve damage, needs to be reconsidered.


    Energy Technology Data Exchange (ETDEWEB)

    Heinze, Jonas; Boncioli, Denise; Winter, Walter [Deutsches Elektronen-Synchrotron (DESY), Platanenallee 6, D-15738 Zeuthen (Germany); Bustamante, Mauricio, E-mail:, E-mail:, E-mail:, E-mail: [Center for Cosmology and AstroParticle Physics (CCAPP), The Ohio State University, Columbus, OH 43210 (United States)


    The origin and composition of ultra-high-energy cosmic rays (UHECRs) remain a mystery. The proton dip model describes their spectral shape in the energy range above 10{sup 9} GeV by pair production and photohadronic interactions with the cosmic microwave background. The photohadronic interactions also produce cosmogenic neutrinos peaking around 10{sup 9} GeV. We test whether this model is still viable in light of recent UHECR spectrum measurements from the Telescope Array experiment and upper limits on the cosmogenic neutrino flux from IceCube. While two-parameter fits have been already presented, we perform a full scan of the three main physical model parameters: source redshift evolution, injected proton maximal energy, and spectral index. We find qualitatively different conclusions compared to earlier two-parameter fits in the literature: a mild preference for a maximal energy cutoff at the sources instead of the Greisen–Zatsepin–Kuzmin cutoff, hard injection spectra, and strong source evolution. The predicted cosmogenic neutrino flux exceeds the IceCube limit for any parameter combination. As a result, the proton dip model is challenged at more than 95% C.L. This is strong evidence against this model independent of mass composition measurements.

  1. Cosmogenic Neutrinos Challenge the Cosmic-ray Proton Dip Model (United States)

    Heinze, Jonas; Boncioli, Denise; Bustamante, Mauricio; Winter, Walter


    The origin and composition of ultra-high-energy cosmic rays (UHECRs) remain a mystery. The proton dip model describes their spectral shape in the energy range above 109 GeV by pair production and photohadronic interactions with the cosmic microwave background. The photohadronic interactions also produce cosmogenic neutrinos peaking around 109 GeV. We test whether this model is still viable in light of recent UHECR spectrum measurements from the Telescope Array experiment and upper limits on the cosmogenic neutrino flux from IceCube. While two-parameter fits have been already presented, we perform a full scan of the three main physical model parameters: source redshift evolution, injected proton maximal energy, and spectral index. We find qualitatively different conclusions compared to earlier two-parameter fits in the literature: a mild preference for a maximal energy cutoff at the sources instead of the Greisen-Zatsepin-Kuzmin cutoff, hard injection spectra, and strong source evolution. The predicted cosmogenic neutrino flux exceeds the IceCube limit for any parameter combination. As a result, the proton dip model is challenged at more than 95% C.L. This is strong evidence against this model independent of mass composition measurements.

  2. Development of procedures to stabilize chlorfenvinphos in model cattle dips

    International Nuclear Information System (INIS)

    Pastor, Y.; Caceres, T.; Merino, R.; Villamar, P.; Castro, R.


    The environmental fate and dissipation of chlorfenvinphos acaricide was studied in water and sediment in model cattle dips with recharge, without recharge and with added stabilizers. Chlorfenvinphos concentration decreased with time in all of them, and the monthly recharge at 10% of the initial concentration was inefficient to maintain a concentration that would be effective for tick control. However, the loss of pesticide in the model dip with added phosphate buffer as stabilizer was the least. Volatilization was the principal factor that influenced the dissipation of the pesticide. The sediment bound residues increased with time. Mineralization of 14 C-chlorfenvinphos due to microbial activity showed that the 14 CO 2 production increased with time in biometers flasks with different amounts of sediment. 2,4-Dichloroacetophenone, and 2,4-dichlorobenzaldehyde were identified as degradation products. Isomerization of chlorfenviphos from isomer Z to E was influenced by sunlight. Chlorfenvinphos was stable in aqueous solution for 14 days under pH 4 to 9. Leaching tests demonstrated that the pesticide was not a potential pollutant of ground water. (author)

  3. ICE-DIP closing workshop - Public session | 14 September

    CERN Multimedia


    ICE-DIP, the Intel-CERN European Doctorate Industrial Program (see here), is a European Industrial Doctorate scheme (see here) led by CERN. The focus of the project, which launched in 2013, has been the development of techniques for acquiring and processing data that are relevant for the trigger and data-acquisition systems of the LHC experiments.   The results will be publicly presented in an open session on the afternoon of 14th September. Building on CERN’s long-standing relationship with Intel through CERN openlab, ICE-DIP brings together CERN, Intel and research universities to offer training to five PhD students in advanced information and communication technologies (ICT). These young researchers have been funded by the European Commission as fellows at CERN and enrolled in doctoral programmes at the National University of Ireland Maynooth and Dublin City University. They have each completed 18 month secondments at Intel locations around the world gaining in-depth experience of the v...

  4. Analysis of Simulated Aircraft Lightning Strikes and Their Electromagnetic Effects

    National Research Council Canada - National Science Library

    Gruden, James


    To survive the intense electromagnetic fields associated with a lightning strike, proper design of aircraft electrical control systems requires knowledge of the transient current pulse associated with a lightning strike...

  5. Strike-slip tectonics during rift linkage (United States)

    Pagli, C.; Yun, S. H.; Ebinger, C.; Keir, D.; Wang, H.


    The kinematics of triple junction linkage and the initiation of transforms in magmatic rifts remain debated. Strain patterns from the Afar triple junction provide tests of current models of how rifts grow to link in area of incipient oceanic spreading. Here we present a combined analysis of seismicity, InSAR and GPS derived strain rate maps to reveal that the plate boundary deformation in Afar is accommodated primarily by extensional tectonics in the Red Sea and Gulf of Aden rifts, and does not require large rotations about vertical axes (bookshelf faulting). Additionally, models of stress changes and seismicity induced by recent dykes in one sector of the Afar triple junction provide poor fit to the observed strike-slip earthquakes. Instead we explain these patterns as rift-perpendicular shearing at the tips of spreading rifts where extensional strains terminate against less stretched lithosphere. Our results demonstrate that rift-perpendicular strike-slip faulting between rift segments achieves plate boundary linkage during incipient seafloor spreading.

  6. Bird strike incidence at Addis Ababa Bole International Airport ...

    African Journals Online (AJOL)

    The time and rate of bird strike incidences, species composition and number of birds involved in strikes, and the behaviour of birds were recorded at Bole International Airport from December 1994 to December 1995. The gut contents of the birds struck by aircraft were analyzed. A total of 33 bird strikes were recorded during ...

  7. Evaluating the Effects of a Bird Strike Advisory System

    NARCIS (Netherlands)

    Metz, I.C.; Mühlhausen, T; Ellerbroek, J.; Hoekstra, J.M.


    Bird strikes have operational impacts and cause economic loss to the aviation industry. In the worst case, the damages resulting from bird strikes lead to crashes. The highest risk for bird strikes lies in the area below 3000 ft and thus mainly in airport environments. Despite intense efforts from

  8. effects of strike cost on economic development in nigeria

    African Journals Online (AJOL)


    productivity as in most cases strike cost (wages and salaries as well as other unavoidable payments) are paid during the .... Many times the Nigeria Labour Congress (NLC) and students have had to strike against ... the direct compensation package and other conditions of service. This is the most popular cause of strike in ...

  9. Journal of Earth System Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    It has been inferred that the Kharsali earthquake occurred due to a northerly dipping low angle thrust fault at a depth of 14 km taking strike N279°E, dip 14° and rake 117°. There are two regions on the fault surface which have larger slip amplitudes (asperities)and the rupture which has been considered as circular in nature ...

  10. Forward to the Past: Strikes and Striking as Dialogue by other ...

    African Journals Online (AJOL)

    In Nigeria, from the colonial period to the present, the employment of strikes and protests by nationalists, Nigerian workers and civil society groups has been established as one of the potent means of conveying viewpoints, positions as well as the demand for equality, fairness, social justice and reforms. It has been used as ...

  11. Statistical analysis on finger replacement schemes for RAKE receivers in the soft handover region with multiple BSs over i.n.d. fading channels

    KAUST Repository

    Nam, Sung Sik


    A new finger replacement technique which is applicable for RAKE receivers in the soft handover region has been proposed and studied under the ideal assumption that the fading is both independent and identically distributed from path to path. To supplement our previous work, we present a general comprehensive framework for the performance assessment of the proposed finger replacement schemes operating over independent but non-identically distributed (i.n.d.) faded paths. To accomplish this object, we derive new closed-form expressions for the target key statistics which are composed of i.n.d. exponential random variables. With these new expressions, the performance analysis of various wireless communication systems over more practical channel environments can be possible.

  12. Liquid-metal dip seal with pneumatic spring

    International Nuclear Information System (INIS)

    Poindexter, A.M.


    An improved liquid-metal dip seal for sealing the annulus between rotating plugs in the reactor vessel head of a liquid-metal fast-breeder nuclear reactor has two legs of differing widths communicating under a seal blade; the wide leg is also in communication with cover gas of the reactor and the narrow leg is also in communication with an isolated plug annulus above the seal. The annulus contains inert gas which acts as a pneumatic spring. Upon increasing cover gas pressure which depresses the level in the wide leg and greatly increases the level in the narrow leg, the pneumatic spring is compressed, and resists further level changes, thus preventing radioactive cover gas from bubbling through the seal

  13. Strike Point Control for the National Spherical Torus Experiment (NSTX)

    International Nuclear Information System (INIS)

    Kolemen, E.; Gates, D.A.; Rowley, C.W.; Kasdin, N.J.; Kallman, J.; Gerhardt, S.; Soukhanovskii, V.; Mueller, D.


    This paper presents the first control algorithm for the inner and outer strike point position for a Spherical Torus (ST) fusion experiment and the performance analysis of the controller. A liquid lithium divertor (LLD) will be installed on NSTX which is believed to provide better pumping than lithium coatings on carbon PFCs. The shape of the plasma dictates the pumping rate of the lithium by channeling the plasma to LLD, where strike point location is the most important shape parameter. Simulations show that the density reduction depends on the proximity of strike point to LLD. Experiments were performed to study the dynamics of the strike point, design a new controller to change the location of the strike point to desired location and stabilize it. The most effective PF coils in changing inner and outer strike points were identified using equilibrium code. The PF coil inputs were changed in a step fashion between various set points and the step response of the strike point position was obtained. From the analysis of the step responses, PID controllers for the strike points were obtained and the controller was tuned experimentally for better performance. The strike controller was extended to include the outer-strike point on the inner plate to accommodate the desired low outer-strike points for the experiment with the aim of achieving 'snowflake' divertor configuration in NSTX.

  14. Structural analysis of CdS thin films obtained by multiple dips of oscillating chemical bath

    International Nuclear Information System (INIS)

    Gutierrez Lazos, C.D.; Rosendo, E.; Ortega, M.; Oliva, A.I.; Tapia, O.; Diaz, T.; Juarez, H.; Garcia, G.; Rubin, M.


    Highly oriented CdS thin films with thicknesses greater than 1 μm were deposited by multiple dips, using oscillating chemical bath deposition (OCBD) at the bath temperature of 75 deg. C, and deposition time ranging from 15 to 75 min for a single dip. Samples with different thickness were prepared by repeating the deposition process for two and three times. The films deposited by a single dip have the α-greenockite structure showing the (0 0 2) as preferred orientation, as indicated by the X-ray diffraction measurements. This notable characteristic is preserved in the samples obtained from two or three dips. The crystallite size for the samples deposited by a single dip depends on the deposition time, because it varied from 23 to 37 nm as the deposition time increased. Nevertheless for samples deposited by two and three dips, the grain size shows no noticeable change, being about 22 nm.

  15. Structural analysis of CdS thin films obtained by multiple dips of oscillating chemical bath

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez Lazos, C.D. [Seccion de Electronica del Estado Solido, Centro de Investigacion y de Estudios Avanzados, Av. Instituto Politecnico Nacional 2508, Col. San Pedro Zacatenco, 07360 Mexico, D.F. (Mexico); Rosendo, E., E-mail: erosendo@siu.buap.m [Centro de Investigacion en Dispositivos Semiconductores, Universidad Autonoma de Puebla, 14 Sur y San Claudio, Col. San Manuel, C.P. 72570, Puebla (Mexico); Ortega, M. [Seccion de Electronica del Estado Solido, Centro de Investigacion y de Estudios Avanzados, Av. Instituto Politecnico Nacional 2508, Col. San Pedro Zacatenco, 07360 Mexico, D.F. (Mexico); Oliva, A.I. [Departamento de Fisica Aplicada, Centro de Investigacion y de Estudios Avanzados, Unidad Merida, A.P. 73 Cordemex, 97310 Merida, Yucatan (Mexico); Tapia, O.; Diaz, T.; Juarez, H.; Garcia, G. [Centro de Investigacion en Dispositivos Semiconductores, Universidad Autonoma de Puebla, 14 Sur y San Claudio, Col. San Manuel, C.P. 72570, Puebla (Mexico); Rubin, M. [Facultad de Ciencias de la Computacion, 14 Sur y San Claudio, Col. San Manuel, C.P. 72570, Puebla (Mexico)


    Highly oriented CdS thin films with thicknesses greater than 1 mum were deposited by multiple dips, using oscillating chemical bath deposition (OCBD) at the bath temperature of 75 deg. C, and deposition time ranging from 15 to 75 min for a single dip. Samples with different thickness were prepared by repeating the deposition process for two and three times. The films deposited by a single dip have the alpha-greenockite structure showing the (0 0 2) as preferred orientation, as indicated by the X-ray diffraction measurements. This notable characteristic is preserved in the samples obtained from two or three dips. The crystallite size for the samples deposited by a single dip depends on the deposition time, because it varied from 23 to 37 nm as the deposition time increased. Nevertheless for samples deposited by two and three dips, the grain size shows no noticeable change, being about 22 nm.

  16. Phase-angle jump during voltage dips in wind power installations

    Energy Technology Data Exchange (ETDEWEB)

    Gomez-Lazaro, E.; Canas, M.; Pujante, A.J. [Universidad de Castilla-La Mancha, Albacete (Spain). Renewable Energy Research Inst. and Dept. of Electrical, Electronic and Control Engineering; Fuentes, J.A.; Molina-Garcia, A. [Universidad Politecnica de Cartagena (Spain). Dept. of Electrical Engineering


    A voltage dip is a disturbance in the power system that consists in a sudden reduction of voltage level and a recovery in a short period of time, the magnitude and angle of the voltage phasors can be affected by this disturbance. The variation between the pre-fault voltage phasor angle and dip voltage phasor angle is called phase-angle jump. In this paper, it is carried out a study of the characteristics of real voltage dips. The study highlights the phase-angle jumps that appear on voltage dips, analyzing the influence of the voltage dip type, depth or length. Voltage dips have been acquired with power quality analyzers with a 10 MHz sample rate in a Spanish wind farm for 18 months. (orig.)

  17. Pseudomonas aeruginosa mastitis in two goats associated with an essential oil-based teat dip. (United States)

    Kelly, E Jane; Wilson, David J


    Pseudomonas aeruginosa is an opportunistic pathogen that has been associated with mastitis in dairy animals, including goats. Often, the environmental sources of the bacteria are water-related (such as hoses and muddy pastures). Mastitis attributable to P. aeruginosa was identified in 2 goats in a small herd. Efforts were made to identify environmental sources of the pathogen. Multiple samples from the goats' environment were cultured, including water from the trough, bedding, the hose used to wash udders, and the teat dip and teat dip containers. The bacterium was isolated from the teat dip and the teat dip container. The teat dip consisted of water, liquid soap, and several drops of essential oils (including tea tree, lavender, and peppermint). This case illustrates a potential problem that may arise as a result of the use of unconventional ingredients in teat dips. The use of alternative products by goat producers is likely to increase in the future. © 2016 The Author(s).

  18. Fault and fracture patterns around a strike-slip influenced salt wall (United States)

    Alsop, G. I.; Weinberger, R.; Marco, S.; Levi, T.


    The trends of faults and fractures in overburden next to a salt diapir are generally considered to be either parallel to the salt margin to form concentric patterns, or at right angles to the salt contact to create an overall radial distribution around the diapir. However, these simple diapir-related patterns may become more complex if regional tectonics influences the siting and growth of a diapir. Using the Sedom salt wall in the Dead Sea Fault system as our case study, we examine the influence of regional strike-slip faulting on fracture patterns around a salt diapir. This type of influence is important in general as the distribution and orientation of fractures on all scales may influence permeability and hence control fluid and hydrocarbon flow. Fractures adjacent to the N-S trending salt wall contain fibrous gypsum veins and injected clastic dykes, attesting to high fluid pressures adjacent to the diapir. Next to the western flank of the salt wall, broad (∼1000 m) zones of upturn or 'drape folds' are associated with NW-SE striking conjugate extensional fractures within the overburden. Within 300 m of the salt contact, fracture patterns in map view display a progressive ∼30°-35° clockwise rotation with more NNW-SSE strikes immediately adjacent to the salt wall. While some extensional faults display growth geometries, indicating that they were syn-depositional and initiated prior to tilting of beds associated with drape folding, other fractures display increasing dips towards the salt, suggesting that they have formed during upturn of bedding near the diapir. These observations collectively suggest that many fractures developed to accommodate rotation of beds during drape folding. Extensional fractures in the overburden define a mean strike that is ∼45° anticlockwise (counter-clockwise) of the N-S trending salt wall, and are therefore consistent with sinistral transtension along the N-S trending Sedom Fault that underlies the salt wall. Our outcrop

  19. Geological Effects on Lightning Strike Distributions

    KAUST Repository

    Berdahl, J. Scott


    Recent advances in lightning detection networks allow for detailed mapping of lightning flash locations. Longstanding rumors of geological influence on cloud-to-ground (CG) lightning distribution and recent commercial claims based on such influence can now be tested empirically. If present, such influence could represent a new, cheap and efficient geophysical tool with applications in mineral, hydrothermal and oil exploration, regional geological mapping, and infrastructure planning. This project applies statistical analysis to lightning data collected by the United States National Lightning Detection Network from 2006 through 2015 in order to assess whether the huge range in electrical conductivities of geological materials plays a role in the spatial distribution of CG lightning. CG flash densities are mapped for twelve areas in the contiguous United States and compared to elevation and geology, as well as to the locations of faults, railroads and tall towers including wind turbines. Overall spatial randomness is assessed, along with spatial correlation of attributes. Negative and positive polarity lightning are considered separately and together. Topography and tower locations show a strong influence on CG distribution patterns. Geology, faults and railroads do not. This suggests that ground conductivity is not an important factor in determining lightning strike location on scales larger than current flash location accuracies, which are generally several hundred meters. Once a lightning channel is established, however, ground properties at the contact point may play a role in determining properties of the subsequent stroke.

  20. Collective bargaining and strikes among physicians. (United States)

    Keith, S N


    UNLIKE EMPLOYEES IN OTHER SECTORS OF THE ECONOMY, HEALTH CARE WORKERS ARE DIRECTED TOWARD ONE ULTIMATE GOAL: making people well and keeping them healthy. The development of collective bargaining and union activities during this century has had a great impact on all industries in the United States and the western world. However, only in recent years have workers in the health care sector been affected by the organized labor movement. The history of collective bargaining and strikes among physicians, the key decision-makers in the health care sector, is even more recent. Because of their central position, physicians' collective activity has had and will continue to have tremendous implications for the viability of the present health care system and the quality of patient care. Even though most physicians continue to function as individual, entrepreneurial service providers and "professionals," physicians as a group are more frequently being seen as members of a utility like industry. Their importance to individuals and society as a whole, it can be argued, is second to none; if physicians refuse to work there can be no worse set of outcomes. To estimate the potential future impact of growing collective action on the part of physicians, this article explores the general historical developments.

  1. Children on hunger strike: child abuse or legitimate protest? (United States)

    Mok, A.; Nelson, E. A.; Murphy, J.; Hampson, A.; Hendriks, J. H.


    The issue of children on hunger strike (voluntary total fasting) has not been reported before. The World Medical Association Declaration of Tokyo 1975 and the Declaration of Malta 1991 (revised 1992) provide clinicians with guidelines for the management of adult patients on hunger strike but do not mention children. We report the management of 14 Vietnamese children, aged 1 to 12 years, who took part in a hunger strike at a refugee detention centre in Hong Kong. PMID:8597690

  2. Children on hunger strike: child abuse or legitimate protest?


    Mok, A.; Nelson, E. A.; Murphy, J.; Hampson, A.; Hendriks, J. H.


    The issue of children on hunger strike (voluntary total fasting) has not been reported before. The World Medical Association Declaration of Tokyo 1975 and the Declaration of Malta 1991 (revised 1992) provide clinicians with guidelines for the management of adult patients on hunger strike but do not mention children. We report the management of 14 Vietnamese children, aged 1 to 12 years, who took part in a hunger strike at a refugee detention centre in Hong Kong.

  3. The effect of hand dominance on martial arts strikes. (United States)

    Neto, Osmar Pinto; Silva, Jansen Henrique; Marzullo, Ana Carolina de Miranda; Bolander, Richard P; Bir, Cynthia A


    The main goal of this study was to compare dominant and non-dominant martial arts palm strikes under different circumstances that usually happen during martial arts and combative sports applications. Seven highly experienced (10±5 years) right hand dominant Kung Fu practitioners performed strikes with both hands, stances with left or right lead legs, and with the possibility or not of stepping towards the target (moving stance). Peak force was greater for the dominant hand strikes (1593.76±703.45 N vs. 1042.28±374.16 N; p<.001), whereas no difference was found in accuracy between the hands (p=.141). Additionally, peak force was greater for the strikes with moving stance (1448.75±686.01 N vs. 1201.80±547.98 N; p=.002) and left lead leg stance (1378.06±705.48 N vs. 1269.96±547.08 N). Furthermore, the difference in peak force between strikes with moving and stationary stances was statistically significant only for the strikes performed with a left lead leg stance (p=.007). Hand speed was higher for the dominant hand strikes (5.82±1.08 m/s vs. 5.24±0.78 m/s; p=.001) and for the strikes with moving stance (5.79±1.01 m/s vs. 5.29±0.90 m/s; p<.001). The difference in hand speed between right and left hand strikes was only significant for strikes with moving stance. In summary, our results suggest that the stronger palm strike for a right-handed practitioner is a right hand strike on a left lead leg stance moving towards the target. Copyright © 2011 Elsevier B.V. All rights reserved.

  4. Polymer nanocomposite patterning by dip-pen nanolithography

    International Nuclear Information System (INIS)

    Kandemir, Ayse Cagil; Ma, Huan; Reiser, Alain; Spolenak, Ralph; Erdem, Derya


    The ultimate aim of this study is to construct polymer nanocomposite patterns by dip-pen nanolithography (DPN). Recent investigations have revealed the effect of the amount of ink (Laplace pressure) on the mechanism of liquid ink writing. In this study it is shown that not only the amount of ink, but also physisorption and surface diffusion are relevant. After a few writing steps, physisorption and surface diffusion outweigh the influence of the amount of ink, allowing consistent patterning governed by dwell times and writing speeds. Polymer matrices can be utilized as a delivery medium to deposit functional particles. DPN patterning of polymer nanocomposites allows for local tuning of the functionality and mechanical strength of the written patterns in high resolution, with the benefit of pattern flexibility. Typically polymer matrices with volatile components are used as a delivery medium for nanoparticle deposition, with subsequent removal of loosely bound matrix material by heating or oxygen plasma. In our study, nanocomposite patterns were constructed, and the differences between polymer and nanocomposite patterning were investigated. Cross-sectional SEM and TEM analysis confirmed that nanoparticles can be deposited with the liquid-polymer ink and are evenly distributed in the polymer matrix. (paper)

  5. Deformation and fatigue behavior of hot dip galvanized coatings

    International Nuclear Information System (INIS)

    Camurri, Carlos P.; Benavente, Raul G.; Roa, Isidoro S.; Carrasco, Claudia C.


    This paper reports on the results of a study of the effect of static and dynamic stresses on hot dip galvanized coatings on SAE 1020 steel substrates. Galvanizing was performed using baths maintained at 450 deg. C, the zinc containing 0.16% Ti and 0.02% Fe and with Al and Ni in the ranges 0-0.20% and 0-0.30%, respectively. Static three-point bend tests were conducted with applied stresses in the range 428-790 MPa. Dynamic bend-fatigue tests involved stresses in the range 228-578 MPa at a cyclic frequency of 0.25 Hz for up to 700 cycles. The total crack density in the coatings was measured before and after the tests using light optical and electron microscopy. The results showed that the crack density increased as the applied stress increased and crack propagation was promoted perpendicular to the substrate. The number of cycles had no effect on the crack density and propagation at stresses lower than 386 MPa. At higher stresses the number of applied cycles contributed only to crack propagation. It was concluded that the best bath composition for preventing fatigue crack propagation is one that minimized the formation of thinner brittle layers in the galvanized coatings

  6. Heterogeneous Rock Simulation Using DIP-Micromechanics-Statistical Methods

    Directory of Open Access Journals (Sweden)

    H. Molladavoodi


    Full Text Available Rock as a natural material is heterogeneous. Rock material consists of minerals, crystals, cement, grains, and microcracks. Each component of rock has a different mechanical behavior under applied loading condition. Therefore, rock component distribution has an important effect on rock mechanical behavior, especially in the postpeak region. In this paper, the rock sample was studied by digital image processing (DIP, micromechanics, and statistical methods. Using image processing, volume fractions of the rock minerals composing the rock sample were evaluated precisely. The mechanical properties of the rock matrix were determined based on upscaling micromechanics. In order to consider the rock heterogeneities effect on mechanical behavior, the heterogeneity index was calculated in a framework of statistical method. A Weibull distribution function was fitted to the Young modulus distribution of minerals. Finally, statistical and Mohr–Coulomb strain-softening models were used simultaneously as a constitutive model in DEM code. The acoustic emission, strain energy release, and the effect of rock heterogeneities on the postpeak behavior process were investigated. The numerical results are in good agreement with experimental data.

  7. Debunking the viper's strike: harmless snakes kill a common assumption. (United States)

    Penning, David A; Sawvel, Baxter; Moon, Brad R


    To survive, organisms must avoid predation and acquire nutrients and energy. Sensory systems must correctly differentiate between potential predators and prey, and elicit behaviours that adjust distances accordingly. For snakes, strikes can serve both purposes. Vipers are thought to have the fastest strikes among snakes. However, strike performance has been measured in very few species, especially non-vipers. We measured defensive strike performance in harmless Texas ratsnakes and two species of vipers, western cottonmouths and western diamond-backed rattlesnakes, using high-speed video recordings. We show that ratsnake strike performance matches or exceeds that of vipers. In contrast with the literature over the past century, vipers do not represent the pinnacle of strike performance in snakes. Both harmless and venomous snakes can strike with very high accelerations that have two key consequences: the accelerations exceed values that can cause loss of consciousness in other animals, such as the accelerations experienced by jet pilots during extreme manoeuvres, and they make the strikes faster than the sensory and motor responses of mammalian prey and predators. Both harmless and venomous snakes can strike faster than the blink of an eye and often reach a target before it can move. © 2016 The Author(s).

  8. Strong Algerian Earthquake Strikes Near Capital City (United States)

    Ayadi, A.; Maouche, S.; Harbi, A.; Meghraoui, M.; Beldjoudi, H.; Oussadou, F.; Mahsas, A.; Benouar, D.; Heddar, A.; Rouchiche, Y.; Kherroubi, A.; Frogneux, M.; Lammali, K.; Benhamouda, F.; Sebaï, A.; Bourouis, S.; Alasset, P. J.; Aoudia, A.; Cakir, Z.; Merahi, M.; Nouar, O.; Yelles, A.; Bellik, A.; Briole, P.; Charade, O.; Thouvenot, F.; Semane, F.; Ferkoul, A.; Deramchi, A.; Haned, S. A.

    On 21 May 2003, a damaging earthquake of Mw 6.8 struck the region of Boumerdes 40 km east of Algiers in northern Algeria (Figure 1). The mainshock, which lasted ~ 36-40 s, had devastating effects and claimed about 2300 victims, caused more than 11,450 injuries, and left about 200,000 people homeless. It destroyed and seriously damaged around 180,000 housing units and 6000 public buildings with losses estimated at $5 billion. The mainshock was widely felt within a radius of ~ 400 km in Algeria. To the north, the earthquake was felt in southeastern Spain, including the Balearic Islands, and also in Sardinia and in southern France. The mainshock location, which was calculated at 36.91°N, 3.58°E (15 km offshore of Zemmouri; Figure 1), and the local magnitude (Md 6.4) are from seismic records of local stations. International seismological centers obtained Mw 6.8 (NEIC) with a thrust focal mechanism solution and 1.83 × 1026 for the seismic moment. A sequence of aftershocks affected the epicentral area with two strong shocks reaching Mw 5.8 on 27 and 29 May 2003. Field investigations allowed us to assign a maximum intensity X (European Macroseismic Scale 98) and to report rockfalls, minor surface cracks, and liquefaction phenomena. The mainshock was not associated with inland surface faulting, but one of the most striking coseismic effects is the coastal uplift and the backwash along the littoral of the Mitidja basin.

  9. 7 CFR 305.21 - Hot water dip treatment schedule for mangoes. (United States)


    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Hot water dip treatment schedule for mangoes. 305.21... Hot water dip treatment schedule for mangoes. Mangoes may be treated using schedule T102-a: (a) Fruit... the treatment. (c) Water in the treatment tank must be treated or changed regularly to prevent...

  10. A decade of U.S. Air Force bat strikes (United States)

    Peurach, Suzanne C.; Dove, Carla J.; Stepko, Laura


    From 1997 through 2007, 821 bat strikes were reported to the U.S. Air Force (USAF) Safety Center by aircraft personnel or ground crew and sent to the National Museum of Natural History, Smithsonian Institution, for identification. Many samples were identified by macroscopic and or microscopic comparisons with bat specimens housed in the museum and augmented during the last 2 years by DNA analysis. Bat remains from USAF strikes during this period were received at the museum from 40 states in the United States and from 20 countries. We confirmed that 46% of the strikes were caused by bats, but we did not identify them further; we identified 5% only to the family or genus level, and 49% to the species level. Fifty-five of the 101 bat-strike samples submitted for DNA analysis have been identified to the species level. Twenty-five bat species have been recorded striking USAF planes worldwide. The Brazilian free-tailed bat (Tadarida brasiliensis; n = 173) is the species most commonly identified in USAF strike impacts, followed by the red bat (Lasiurus borealis; n = 83). Bat strikes peak during the spring and fall, with >57% occurring from August through October; 82% of the reports that included time of strike were recorded between 2100 and 0900 hours. More than 12% of the bat strikes were reported at >300 m above ground level (AGL). Although $825,000 and >50% of this sum was attributable to 5 bat-strike incidents. Only 5 bats from the 10 most damaging bat strikes were identified to the species level, either because we did not receive remains with the reports or the sample was insufficient for identification.

  11. Comparison of piracetam measured with HPLC-DAD, HPLC-ESI-MS, DIP-APCI-MS, and a newly developed and optimized DIP-ESI-MS. (United States)

    Lenzen, Claudia; Winterfeld, Gottfried A; Schmitz, Oliver J


    The direct inlet probe-electrospray ionization (DIP-ESI) presented here was based on the direct inlet probe-atmospheric pressure chemical ionization (DIP-APCI) developed by our group. It was coupled to an ion trap mass spectrometer (MS) for the detection of more polar compounds such as degradation products from pharmaceuticals. First, the position of the ESI tip, the gas and solvent flow rates, as well as the gas temperature were optimized with the help of the statistic program Minitab® 17 and a caffeine standard. The ability to perform quantitative analyses was also tested by using different concentrations of caffeine and camphor. Calibration curves with a quadratic calibration regression of R (2) = 0.9997 and 0.9998 for caffeine and camphor, respectively, were obtained. The limit of detection of 2.5 and 1.7 ng per injection for caffeine and camphor were determined, respectively. Furthermore, a solution of piracetam was used to compare established analytical methods for this drug and its impurities such as HPLC-diode array detector (DAD) and HPLC-ESI-MS with the DIP-APCI and the developed DIP-ESI. With HPLC-DAD and 10 μg piracetam on column, no impurity could be detected. With HPLC-ESI-MS, two impurities (A and B) were identified with only 4.6 μg piracetam on column, while with DIP-ESI, an amount of 1.6 μg piracetam was sufficient. In the case of the DIP-ESI measurements, all detected impurities could be identified by MS/MS studies. Graphical Abstract Scheme of the DIP-ESI principle.

  12. Reporting the Great Railroad Strike: How Ideology Shaped the News. (United States)

    Coward, John

    The Great Railroad Strike of 1877, a national catastrophe and the major news story of the year, was the first national labor strike in U.S. history. Because of the ideological bias of the press, specifically its implicit commitment to capitalism and to objectivity (itself a "myth" of social order), newspapers of the period could be…

  13. The public's attitude towards strike action by healthcare workers and ...

    African Journals Online (AJOL)

    The strength of the associations was determined by Cramer's V. Results. Results revealed strong opinions among the population regarding strikes, numerous misapprehensions when it comes to striking and rights, a poor awareness of other healthcare-related rights and the perception of poor treatment at public hospitals.

  14. Teaching Striking Skills in Elementary Physical Education Using Woodball (United States)

    Chang, Seung Ho; Lee, Jihyun


    Object control (OC) skills are a part of fundamental motor skills and basic functional skills, which work as a prerequisite to becoming a skilled performer in many sports. Of various OC skills, striking is one of the most difficult to master due to a variety of interrelated movement components. A form of vertical or underarm striking is a more…


    African Journals Online (AJOL)


    Oct 6, 2014 ... employment. Kidnapping has been affecting virtually every sector of the Nigerian economy. Thus it is not the right of any health worker to embark on strike. Rather the right to strike can be derived from the principle of collective bargaining, which according to Ahmed (2014) is an essential principle. Workers ...

  16. Ban on right to strike by police challenged

    NARCIS (Netherlands)

    Grünell, M.


    After months of negotiation between the police force and the minister of the interior on the renewal of the collective agreement, the police trade unions began threatening industrial action and strikes in December 2007. The courts were divided on the issue, with some ruling out strikes as a means of

  17. Martial arts striking hand peak acceleration, accuracy and consistency. (United States)

    Neto, Osmar Pinto; Marzullo, Ana Carolina De Miranda; Bolander, Richard P; Bir, Cynthia A


    The goal of this paper was to investigate the possible trade-off between peak hand acceleration and accuracy and consistency of hand strikes performed by martial artists of different training experiences. Ten male martial artists with training experience ranging from one to nine years volunteered to participate in the experiment. Each participant performed 12 maximum effort goal-directed strikes. Hand acceleration during the strikes was obtained using a tri-axial accelerometer block. A pressure sensor matrix was used to determine the accuracy and consistency of the strikes. Accuracy was estimated by the radial distance between the centroid of each subject's 12 strikes and the target, whereas consistency was estimated by the square root of the 12 strikes mean squared distance from their centroid. We found that training experience was significantly correlated to hand peak acceleration prior to impact (r(2)=0.456, p =0.032) and accuracy (r(2)=0. 621, p=0.012). These correlations suggest that more experienced participants exhibited higher hand peak accelerations and at the same time were more accurate. Training experience, however, was not correlated to consistency (r(2)=0.085, p=0.413). Overall, our results suggest that martial arts training may lead practitioners to achieve higher striking hand accelerations with better accuracy and no change in striking consistency.

  18. Risk Considerations of Bird Strikes to Space Launch Vehicles (United States)

    Hales, Christy; Ring, Robert


    Within seconds after liftoff of the Space Shuttle during mission STS-114, a turkey vulture impacted the vehicle's external tank. The contact caused no apparent damage to the Shuttle, but the incident led NASA to consider the potential consequences of bird strikes during a Shuttle launch. The environment at Kennedy Space Center provides unique bird strike challenges due to the Merritt Island National Wildlife Refuge and the Atlantic Flyway bird migration routes. NASA is currently refining risk assessment estimates for the probability of bird strike to space launch vehicles. This paper presents an approach for analyzing the risks of bird strikes to space launch vehicles and presents an example. The migration routes, types of birds present, altitudes of those birds, exposed area of the launch vehicle, and its capability to withstand impacts affect the risk due to bird strike. A summary of significant risk contributors is discussed.

  19. Power electromagnetic strike machine for engineering-geological surveys (United States)

    Usanov, K. M.; Volgin, A. V.; Chetverikov, E. A.; Kargin, V. A.; Moiseev, A. P.; Ivanova, Z. I.


    When implementing the processes of dynamic sensing of soils and pulsed nonexplosive seismic exploration, the most common and effective method is the strike one, which is provided by a variety of structure and parameters of pneumatic, hydraulic, electrical machines of strike action. The creation of compact portable strike machines which do not require transportation and use of mechanized means is important. A promising direction in the development of strike machines is the use of pulsed electromagnetic actuator characterized by relatively low energy consumption, relatively high specific performance and efficiency, and providing direct conversion of electrical energy into mechanical work of strike mass with linear movement trajectory. The results of these studies allowed establishing on the basis of linear electromagnetic motors the electromagnetic pulse machines with portable performance for dynamic sensing of soils and land seismic pulse of small depths.

  20. Wavelet transform analysis of electromyography kung fu strikes data. (United States)

    Neto, Osmar Pinto; Marzullo, Ana Carolina de Miranda


    In martial arts and contact sports strikes are performed at near maximum speeds. For that reason, electromyography (EMG) analysis of such movements is non-trivial. This paper has three main goals: firstly, to investigate the differences in the EMG activity of muscles during strikes performed with and without impacts; secondly, to assess the advantages of using Sum of Significant Power (SSP) values instead of root mean square (rms) values when analyzing EMG data; and lastly to introduce a new method of calculating median frequency values using wavelet transforms (WMDF). EMG data of the deltoid anterior (DA), triceps brachii (TB) and brachioradialis (BR) muscles were collected from eight Kung Fu practitioners during strikes performed with and without impacts. SSP results indicated significant higher muscle activity (p = 0.023) for the strikes with impact. WMDF results, on the other hand, indicated significant lower values (p = 0. 007) for the strikes with impact. SSP results presented higher sensitivity than rms to quantify important signal differences and, at the same time, presented lower inter-subject coefficient of variations. The result of increase in SSP values and decrease in WMDF may suggest better synchronization of motor units for the strikes with impact performed by the experienced Kung Fu practitioners. Key PointsThe results show higher muscle activity and lower electromyography median frequencies for strikes with impact compared to strikes without.SSP results presented higher sensitivity and lower inter-subject coefficient of variations than rms results.Kung Fu palm strikes with impact may present better motor units' synchronization than strikes without.

  1. The impact of synthetic pyrethroid and organophosphate sheep dip formulations on microbial activity in soil

    Energy Technology Data Exchange (ETDEWEB)

    Boucard, Tatiana K.; McNeill, Charles [Department of Environmental Science, Faculty of Science and Technology, Lancaster University, Lancaster LA1 4YQ (United Kingdom); Bardgett, Richard D. [Department of Biological Sciences, Faculty of Science and Technology, Lancaster University, Lancaster LA1 4YQ (United Kingdom); Paynter, Christopher D. [Department of Environmental Science, Faculty of Science and Technology, Lancaster University, Lancaster LA1 4YQ (United Kingdom); Semple, Kirk T. [Department of Environmental Science, Faculty of Science and Technology, Lancaster University, Lancaster LA1 4YQ (United Kingdom)], E-mail:


    Sheep dip formulations containing organophosphates (OPs) or synthetic pyrethroids (SPs) have been widely used in UK, and their spreading onto land has been identified as the most practical disposal method. In this study, the impact of two sheep dip formulations on the microbial activity of a soil was investigated over a 35-d incubation. Microbial utilisation of [1-{sup 14}C] glucose, uptake of {sup 14}C-activity into the microbial biomass and microbial numbers (CFUs g{sup -1} soil) were investigated. In control soils and soils amended with 0.01% sheep dip, after 7 d a larger proportion of added glucose was allocated to microbial biomass rather than respired to CO{sub 2}. No clear temporal trends were found in soils amended with 0.1% and 1% sheep dips. Both sheep dip formulations at 0.1% and 1% concentrations resulted in a significant increase in CFUs g{sup -1} soil and [1-{sup 14}C] glucose mineralisation rates, as well as a decline in microbial uptake of [1-{sup 14}C] glucose, compared to control and 0.01% SP- or OP-amended soils. This study suggests that the growth, activity, physiological status and/or structure of soil microbial community may be affected by sheep dips. - The application of sheep dip formulations can have a profound impact upon microbial activity and substrate utilisation in soil.

  2. DIP1 modulates stem cell homeostasis in Drosophila through regulation of sisR-1. (United States)

    Wong, Jing Ting; Akhbar, Farzanah; Ng, Amanda Yunn Ee; Tay, Mandy Li-Ian; Loi, Gladys Jing En; Pek, Jun Wei


    Stable intronic sequence RNAs (sisRNAs) are by-products of splicing and regulate gene expression. How sisRNAs are regulated is unclear. Here we report that a double-stranded RNA binding protein, Disco-interacting protein 1 (DIP1) regulates sisRNAs in Drosophila. DIP1 negatively regulates the abundance of sisR-1 and INE-1 sisRNAs. Fine-tuning of sisR-1 by DIP1 is important to maintain female germline stem cell homeostasis by modulating germline stem cell differentiation and niche adhesion. Drosophila DIP1 localizes to a nuclear body (satellite body) and associates with the fourth chromosome, which contains a very high density of INE-1 transposable element sequences that are processed into sisRNAs. DIP1 presumably acts outside the satellite bodies to regulate sisR-1, which is not on the fourth chromosome. Thus, our study identifies DIP1 as a sisRNA regulatory protein that controls germline stem cell self-renewal in Drosophila.Stable intronic sequence RNAs (sisRNAs) are by-products of splicing from introns with roles in embryonic development in Drosophila. Here, the authors show that the RNA binding protein DIP1 regulates sisRNAs in Drosophila, which is necessary for germline stem cell homeostasis.

  3. Spin coated versus dip coated electrochromic tungsten oxide films: Structure, morphology, optical and electrochemical properties

    International Nuclear Information System (INIS)

    Deepa, M.; Saxena, T.K.; Singh, D.P.; Sood, K.N.; Agnihotry, S.A.


    A sol-gel derived acetylated peroxotungstic acid sol encompassing 4 wt.% of oxalic acid dihydrate (OAD) has been employed for the deposition of tungsten oxide (WO 3 ) films by spin coating and dip coating techniques, in view of smart window applications. The morphological and structural evolution of the as-deposited spin and dip coated films as a function of annealing temperature (250 and 500 o C) has been examined and compared by Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD). A conspicuous feature of the dip coated film (annealed at 250 o C) is that its electrochromic and electrochemical properties ameliorate with cycling without degradation in contrast to the spin coated film for which these properties deteriorate under repetitive cycling. A comparative study of spin and dip coated nanostructured thin films (annealed at 250 o C) revealed a superior performance for the cycled dip coated film in terms of higher transmission modulation and coloration efficiency in solar and photopic regions, faster switching speed, higher electrochemical activity as well as charge storage capacity. While the dip coated film could endure 2500 color-bleach cycles, the spin coated film could sustain only a 1000 cycles. The better cycling stability of the dip coated film which is a repercussion of a balance between optimal water content, porosity and grain size hints at its potential for electrochromic window applications

  4. A set of 14 DIP-SNP markers to detect unbalanced DNA mixtures. (United States)

    Liu, Zhizhen; Liu, Jinding; Wang, Jiaqi; Chen, Deqing; Liu, Zidong; Shi, Jie; Li, Zeqin; Li, Wenyan; Zhang, Gengqian; Du, Bing


    Unbalanced DNA mixture is still a difficult problem for forensic practice. DIP-STRs are useful markers for detection of minor DNA but they are not widespread in the human genome and having long amplicons. In this study, we proposed a novel type of genetic marker, termed DIP-SNP. DIP-SNP refers to the combination of INDEL and SNP in less than 300bp length of human genome. The multiplex PCR and SNaPshot assay were established for 14 DIP-SNP markers in a Chinese Han population from Shanxi, China. This novel compound marker allows detection of the minor DNA contributor with sensitivity from 1:50 to 1:1000 in a DNA mixture of any gender with 1 ng-10 ng DNA template. Most of the DIP-SNP markers had a relatively high probability of informative alleles with an average I value of 0.33. In all, we proposed DIP-SNP as a novel kind of genetic marker for detection of minor contributor from unbalanced DNA mixture and established the detection method by associating the multiplex PCR and SNaPshot assay. DIP-SNP polymorphisms are promising markers for forensic or clinical mixture examination because they are shorter, widespread and higher sensitive. Copyright © 2018 Elsevier Inc. All rights reserved.

  5. Millisecond Dip Events in the 2007 RXTE/PCA Data of Sco X-1 (United States)

    Liu, Chih-Yuan; Chang, H.


    We report preliminary results of search for millisecond dip events with the new RXTE/PCA data of Sco X-1 taken in year 2007. Adopting the same selection criteria as that in previous study, we found that there are only 3 dip events in about 85 ks data, much fewer than the 107 events found in 560 ks data reported earlier with archival data taken from 1996 to 2002. The new data provide more detailed information of the 'very large event' (VLE). Although the number of VLE does not obviously increase during the occurrence of dip events, all the 3 dip events are coincident in time with VLEs that have no flags set for any of the propane or the 6 main xenon anodes. It is a strong indication for instrumental effect. With only 3 dip events, however, the previously proposed possibility that about 10 percent of the dip events might not be instrumental still cannot be strictly excluded. More properties of these dip events are discussed in this paper. This work was supported by the National Science Council of the Republic of China.

  6. Validity of head-dipping as a measure of exploration in a modified hole-board. (United States)

    File, S E; Wardill, A G


    To determine whether head-dipping could be validated as a measure of exploration a modified hole-board was developed with four holes in the floor, under which novel objects could be placed. Two criteria for considering head-dipping as a measure of exploration were proposed: firstly that it should reflect novel aspects of the environment; secondly, that exposure to the hole-board should result in information storage. That head-dipping reflected novelty was indicated by the longer duration of head-dips on initial exposure if objects were present, and also on a second exposure when objects were introduced for the first time. Information storage was indicated by habituation on re-exposure to the hole-board. A significant positive correlation between head-dipping in the "four" and "sixteen" hole-boards was obtained for rats, but not for mice. This provided some indirect evidence that rat head-dipping in the "sixteen hole-board" also reflects exploration. (+)Amphetamine and alcohol were tested in the modified hole-board, and (+)amphetamine decreased and alcohol increased the frequency and duration of head-dips.

  7. Trapping dynamics of diindenoperylene (DIP) in self-assembled monolayers using molecular simulation

    KAUST Repository

    Kaushik, Ananth P.


    All-atom Molecular Dynamics simulation methods employing a well-tested intermolecular potential model, MM3 (Molecular Mechanics 3), demonstrate the propensity for diindenoperylene (DIP) molecules to insert between molecules of a self-assembled monolayer (SAM) during a deposition process intended to grow a thin film of this organic semiconductor molecule onto the surface of self-assembled monolayers. The tendency to insert between SAM molecules is fairly prevalent at normal growth temperatures and conditions, but is most strongly dependent on the density and the nature of the SAM. We posit the existence of an optimal density to favor surface adsorption over insertion for this system. DIP is less likely to insert in fluorinated SAMs, like FOTS (fluorooctatrichlorosilane), than its unfluorinated analog, OTS (octatrichlorosilane). It is also less likely to insert between shorter SAMs (e.g., less insertion in OTS than ODTS (octadecyltrichlorosilane)). Very short length, surface-coating molecules, like HDMS (hexamethyldisilazane), are more likely to scatter energetic incoming DIP molecules with little insertion on first impact (depending on the incident energy of the DIP molecule). Grazing angles of incidence of the depositing molecules generally favor surface adsorption, at least in the limit of low coverage, but are shown to be dependent on the nature of the SAM. The validity of these predictions is confirmed by comparison of the predicted sticking coefficients of DIP at a variety of incident energies on OTS, ODTS, and FOTS SAMs with results obtained experimentally by Desai et al. (2010) [23]. The simulation predictions of the tendency of DIP to insert can be explained, in large part, in terms of binding energies between SAM and DIP molecules. However, we note that entropic and stochastic events play a role in the deposition outcomes. Preliminary studies of multiple deposition events, emulating growth, show an unexpected diffusion of DIP molecules inserted within the

  8. Efficiency dip observed with InGaN-based multiple quantum well solar cells

    KAUST Repository

    Lai, Kunyu


    The dip of external quantum efficiency (EQE) is observed on In0.15Ga0.85N/GaN multiple quantum well (MQW) solar cells upon the increase of incident optical power density. With indium composition increased to 25%, the EQE dip becomes much less noticeable. The composition dependence of EQE dip is ascribed to the competition between radiative recombination and photocurrent generation in the active region, which are dictated by quantum-confined Stark effect (QCSE) and composition fluctuation in the MQWs.

  9. Assessment of the impact of dipped guideways on urban rail transit systems: Ventilation and safety requirements (United States)


    The ventilation and fire safety requirements for subway tunnels with dipped profiles between stations as compared to subway tunnels with level profiles were evaluated. This evaluation is based upon computer simulations of a train fire emergency condition. Each of the tunnel configurations evaluated was developed from characteristics that are representative of modern transit systems. The results of the study indicate that: (1) The level tunnel system required about 10% more station cooling than dipped tunnel systems in order to meet design requirements; and (2) The emergency ventilation requirements are greater with dipped tunnel systems than with level tunnel systems.

  10. The effect of stratigraphic dip on multiphase flow at the Waste Isolation Pilot Plant

    International Nuclear Information System (INIS)

    Webb, S.W.; Larson, K.W.


    The natural stratigraphic dip at the Waste Isolation Pilot Plant (WIPP), although regionally only about 1 degree, has the potential to affect brine inflow and gas migration distances due to buoyancy forces. Brine inflow may increase due to countercurrent flow, and gas may preferentially migrate updip. Analytical and numerical modeling was used to evaluate the impact of the dip on brine inflow and gas migration distances at the WIPP in one, two, and three dimensions. Results show that the effect of dip on brine inflow and gas migration distance may be significant

  11. Preparation of WO3 thin film by successive dip coating for electrochromic and photoelectrochromic devices

    International Nuclear Information System (INIS)

    Park, Jae Hyuk; Kang, Jin Soo; Kim, Jin; Lee, Kyung Jae; Sung, Yung Eun; Cha, In Young


    Here we report the superiority of WO 3 thin films prepared by successive dip coating in electrochromic devices. Dip coatings were done on transparent conducting oxide substrates in the WO 3 precursor solution a number of times without drying in between the coating steps. This process enabled the fabrication of WO 3 films with optimum thickness and large roughness, which led to enhanced performance when they were employed as the electrode in electrochromic devices. We made a further observation by applying these electrodes in photoelectrochromic devices and verified the excellent properties of the successively dip-coated WO 3 films

  12. Analysis of Mechanical Stresses Due to Voltage Dips in Fixed-Speed Wind Turbines

    DEFF Research Database (Denmark)

    Veluri, Badrinath; Santos-Martin, David; Jensen, Henrik Myhre


    stresses transients that may have a detrimental effect on the fatigue life of drivetrain system due to voltage dips. A rainflow cycle counting method for the stress history during the voltage dip event, analyses mean and amplitudes of the counted cycles, their occurrence moment and time of duration.......Voltage dips due to electrical grid faults generate transients of the generator electromagnetic torque which result in significant high stresses and noticeable vibrations for the wind turbine mechanical system. These events may also have a detrimental effect on the fatigue life of important...

  13. Strikes by physicians: a historical perspective toward an ethical evaluation. (United States)

    Thompson, Stephen L; Salmon, J Warren


    Current conditions surrounding the house of medicine-including corporate and government cost-containment strategies, increasing market-penetration schemes in health care, along with clinical scrutiny and the administrative control imposed under privatization by managed care firms, insurance companies, and governments-have spurred an upsurge in physician unionization, which requires a revisiting of the issue of physician strikes. Strikes by physicians have been relatively rare events in medical history. When they have occurred, they have aroused intense debate over their ethical justification among professionals and the public alike, notwithstanding what caused the strikes. As physicians and other health care providers increasingly find employment within organizations as wage-contract employees and their work becomes more highly rationalized, more physicians will join labor organizations to protect both their economic and their professional interests. As a result, these physicians will have to come to terms with the use of the strike weapon. On the surface, many health care strikes may not ever seem justifiable, but in certain defined situations a strike would be not only permissible but an ethical imperative. With an exacerbation of labor strife in the health sector in many nations, it is crucial to explore the question of what constitutes an ethical physician strike.

  14. Determine the Foot Strike Pattern Using Inertial Sensors

    Directory of Open Access Journals (Sweden)

    Tzyy-Yuang Shiang


    Full Text Available From biomechanical point of view, strike pattern plays an important role in preventing potential injury risk in running. Traditionally, strike pattern determination was conducted by using 3D motion analysis system with cameras. However, the procedure is costly and not convenient. With the rapid development of technology, sensors have been applied in sport science field lately. Therefore, this study was designed to determine the algorithm that can identify landing strategies with a wearable sensor. Six healthy male participants were recruited to perform heel and forefoot strike strategies at 7, 10, and 13 km/h speeds. The kinematic data were collected by Vicon 3D motion analysis system and 2 inertial measurement units (IMU attached on the dorsal side of both shoes. The data of each foot strike were gathered for pitch angle and strike index analysis. Comparing the strike index from IMU with the pitch angle from Vicon system, our results showed that both signals exhibited highly correlated changes between different strike patterns in the sagittal plane (r=0.98. Based on the findings, the IMU sensors showed potential capabilities and could be extended beyond the context of sport science to other fields, including clinical applications.

  15. Analog modeling of strike-slip surface ruptures: Implications for Greendale Fault (New Zealand) mechanics and paleoseismology (United States)

    Sasnett, P.; Quigley, M.; Cruden, A. R.; Boutelier, D. A.; Villamor, P.


    Analog modeling of strike-slip faulting provides insight into the development and behavior of surface ruptures with progressive slip, with relevance for understanding how coseismic displacements from fault ruptures are recorded in paleoseismic trenches. Patterns of surface deformation were investigated in analogue experiments using cohesive and non-cohesive granular materials above a vertical, planar, strike-slip basement fault. Surface deformation during the experiments was monitored by 3D PIV (Particle Imaging Velocimetry) and 2D time-lapse photography. Analysis of the experiments focused on fault zone morphology and development, as well as comparisons between the models and surface deformation observed along the Greendale Fault that resulted from the 2010 Darfield earthquake, New Zealand. Complex surface rupture patterns with similar characteristics to the Greendale Fault (en echelon fractures, Riedel shears, pop-up structures, etc.) were generated by a simple fault plane of uniform dip, slip, and frictional properties. The main controls on surface rupture morphology were found to be the properties and thickness of the overburden, the nature of the material surface, and the overall displacement of the underlying fault. Mapping the evolution of fracture patterns with progressive shear strain reveals that Riedel shears, striking 0-30° from the underlying basement fault, are more frequently reactivated during multiple displacement (earthquake) cycles, and are thus most likely to provide reliable paleoseismic records. This information will assist in the identification of suitable locations for paleoseismic trenches and in the interpretation of trench records from the Greendale Fault and other active, strike-slip faults in analogous geologic settings. The results also highlight the tendency of trenching studies of faults of this type to underestimate the number of and displacements on previous ruptures, which potentially leads to an underestimate of the magnitude

  16. Strike action by nurses in South Africa: A value clarification

    Directory of Open Access Journals (Sweden)

    Marie Muller


    Full Text Available The Labour Relations Act (South Africa, 1991 made provision for protected strike action by employees, subject to certain conditions, procedures and negotiated agreements. This led to the removal of the strike clause in the Nursing Act (South Africa, 1992. The labour rights of all citizens are entrenched in the Constitution of the country (South Africa, 1996. Participation in strike action by the nurse/ midwife, regardless of the legal requirements and specifications, does, however, pose an ethical question. It is therefore necessary to conduct a value clarification on strike action by nurses in South Africa. The purpose of this research is to explore and describe the perceived values of participants from an accessible population on this phenomenon. A qualitative, exploratory and descriptive research design was deployed. The perceived values of nurses on strike action were collected by means of an openended questionnaire/sketch. Over a period of three years a purposive and convenient sampling method was used, involving all the enrolled post basic nursing/midwifery students/ learners at a particular Nursing Education Institution. The justification of the sample was further enhanced by also collecting data on the participants’ age and provincial distribution location. Although a 63% sample realisation (of the accessible population was achieved, this represents only 1,5% of the registered nursing/midwifery population in the country. A descriptive analysis of the participants’ age and provincial distribution was undertaken, as well as a content analysis of their perceived values on strike action. The mean age of the participants was 48 years, which could be attributed to the fact that most of them were enrolled for a post-basic Diploma in Community Nursing Science. Most of the responses (52,7% were against strike action and 32,5% supported strike action by nurses as a constitutional and legal right. A fairly substantial number of participants (14

  17. "Thunderstruck": penetrating thoracic injury from lightning strike. (United States)

    van Waes, Oscar J F; van de Woestijne, Pieter C; Halm, Jens A


    Lightning strike victims are rarely presented at an emergency department. Burns are often the primary focus. This case report describes the improvised explosive device like-injury to the thorax due to lightning strike and its treatment, which has not been described prior in (kerauno)medicine. Penetrating injury due to blast from lightning strike is extremely rare. These "shrapnel" injuries should however be ruled out in all patients struck by lightning. Copyright © 2013 American College of Emergency Physicians. Published by Mosby, Inc. All rights reserved.

  18. Evaluation of a new trend in the geotechnology for steeply dipping vein deposits in Kyrgyzstan (United States)

    Kozhogulov, KCh; Ganiev, ZhM


    The authors evaluate advancement in the geotechnology for steeply dipping vein deposits. It is proposed to use large-diameter drilling with drilling assembly BGA-2V-02. As a result, the efficiency of mining is enhanced.

  19. Dynamic isotope power system (DIPS) applications study. Volume I. Summary. Final report

    International Nuclear Information System (INIS)


    The Nuclear Integrated Multimission Spacecraft (NIMS) is designed for communications, surveillance, navigation and meteorelogical missions. This study assesses th attributes of the Dynamic Isotope Power System (DIPS) for this spacecraft. These attributes include cost, system and mission compatibility, and survivability



    Absi, Rafik


    International audience; In this study, we present analytical tools for velocity distribution in steady uniform open-channel flows. Simple dip-modified laws are presented. An ordinary differential equation based on an analysis of the Reynolds-averaged Navier-Stokes (RANS) equations is proposed. Comparisons of predicted velocity profiles with experimental data show good agreement. It is well known that dip-phenomenon depends on aspect ratio Ar (ratio of the channel width b to the water depth h)...

  1. Continental United States Hurricane Strikes 1950-2012 (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Continental U.S. Hurricane Strikes Poster is our most popular poster which is updated annually. The poster includes all hurricanes that affected the U.S. since...

  2. 2005 Significant U.S. Hurricane Strikes Poster (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The 2005 Significant U.S. Hurricane Strikes poster is one of two special edition posters for the Atlantic Hurricanes. This beautiful poster contains two sets of...

  3. Ethical and legal consideration of prisoner's hunger strike in Serbia. (United States)

    Alempijevic, Djordje; Pavlekic, Snezana; Jecmenica, Dragan; Nedeljkov, Aleksandra; Jankovic, Milos


    Hunger strike of prisoners and detainees remains a major human rights and ethical issue for medical professionals. We are reporting on a case of a 48-year-old male sentenced prisoner, intravenous heroin user, who went on a hunger strike and died 15 days later. Throughout the fasting period, the prisoner, who was capable of decision making, refused any medical examination. Autopsy findings were not supporting prolonged starvation, while toxicology revealed benzodiazepines and opiates in blood and urine. Cause of death was given as "heroin intoxication" in keeping with detection of 6-MAM. Legal and ethical issues pertinent to medical examination and treatment of prisoners on hunger strike are explored in accordance with legislation and professional ethical standards in Serbia. A recommendation for the best autopsy practice in deaths following hunger strike has been made. © 2011 American Academy of Forensic Sciences.

  4. Nuclear First Strike-Have the Rules Changed?

    National Research Council Canada - National Science Library

    Carter, Rosemary M


    .... Nuclear first strike is the policy that reserves the right to use nuclear weapons against an enemy before that enemy employs a like weapon without any constraints on the decision to employ the weapon...

  5. Joint Strike Fighter fit for duty in Europe?

    NARCIS (Netherlands)

    Heerkens, Johannes M.G.


    Focuses on the potential growth of the Joint Strike Fighter (JSF) market in Europe. Competition between Lockheed Martin and Boeing for the fighter's design contract; Disadvantages of the fighter plane; Stealth performance of JSF.

  6. Comparison of force, power, and striking efficiency for a Kung Fu strike performed by novice and experienced practitioners: preliminary analysis. (United States)

    Neto, Osmar Pinto; Magini, Marcio; Saba, Marcelo M F; Pacheco, Marcos Tadeu Tavares


    This paper presents a comparison of force, power, and efficiency values calculated from Kung Fu Yau-Man palm strikes, when performed by 7 experienced and 6 novice men. They performed 5 palm strikes to a freestanding basketball, recorded by high-speed camera at 1000 Hz. Nonparametric comparisons and correlations showed experienced practitioners presented larger values of mean muscle force, mean impact force, mean muscle power, mean impact power, and mean striking efficiency, as is noted in evidence obtained for other martial arts. Also, an interesting result was that for experienced Kung Fu practitioners, muscle power was linearly correlated with impact power (p = .98) but not for the novice practitioners (p = .46).

  7. Psychosocial Correlates of Nocturnal Blood Pressure Dipping in African Americans: The Jackson Heart Study. (United States)

    Spruill, Tanya M; Shallcross, Amanda J; Ogedegbe, Gbenga; Chaplin, William F; Butler, Mark; Palfrey, Amy; Shimbo, Daichi; Muntner, Paul; Sims, Mario; Sarpong, Daniel F; Agyemang, Charles; Ravenell, Joseph


    African Americans exhibit a lower degree of nocturnal blood pressure (BP) dipping compared with Whites, but the reasons for reduced BP dipping in this group are not fully understood. The aim of this study was to identify psychosocial factors associated with BP dipping in a population-based cohort of African Americans. This cross-sectional study included 668 Jackson Heart Study (JHS) participants with valid 24-hour ambulatory BP data and complete data on psychosocial factors of interest including stress, negative emotions, and psychosocial resources (e.g., perceived support). The association of each psychosocial factor with BP dipping percentage and nondipping status (defined as Higher depressive symptoms, higher hostility, and lower perceived social support were associated with a lower BP dipping percentage in unadjusted models and after adjustment for age, sex, body mass index, and mean 24-hour systolic BP (P social support as a potentially modifiable determinant of nocturnal BP dipping warrants further investigation. © American Journal of Hypertension, Ltd 2016. All rights reserved. For Permissions, please email:

  8. Local avian density influences risk of mortality from window strikes (United States)

    Sabo, Ann M.; Hagemeyer, Natasha D.G.; Lahey, Ally S.


    Up to a billion birds die per year in North America as a result of striking windows. Both transparent and reflective glass panes are a cause for concern, misleading birds by either acting as invisible, impenetrable barriers to desired resources, or reflecting those resources over a large surface area. A high number of window strikes occur during migration, but little is known about the factors of susceptibility, or whether particular avian taxa are more vulnerable than others. We report on a study of window strikes and mist-netting data at the Virginia Zoological Park (Norfolk, Virginia, USA), conducted in the autumn of 2013 and 2014. We focused on three factors likely to contribute to an individual’s predisposition to collide with windows: (i) taxonomic classification, (ii) age, and (iii) migrant vs. resident status. Thrushes, dominated by the partial migrant American Robin (Turdus migratorius), were significantly less likely to strike glass than be sampled in mist nets (χ2 = 9.21, p = 0.002), while wood-warblers (Parulidae) were more likely to strike than expected (χ2 = 13.55, p windows (45.4%) was not significantly different (χ2 = 0.05, p = 0.827) than the population of juvenile birds naturally occurring at the zoo (48.8%). Migrants, however, were significantly more susceptible to window strikes than residents (χ2 = 6.35, p = 0.012). Our results suggest that resident birds are able to learn to avoid and thus reduce their likelihood of striking windows; this intrinsic risk factor may help explain the apparent susceptibility of certain taxa to window strikes. PMID:27366656

  9. NASA storm hazards research in lightning strikes to aircraft (United States)

    Fisher, B. D.; Brown, P. W.; Plumer, J. A.


    The lightning strike condition data gathered in the 1980-1984 period are presented, together with the lightning attachment point analysis for the NASA F-106B research aircraft are presented. The analysis of the experienced 637 direct lightning strikes shows that the highest strike rates (2.1 strikes/min and 13 strikes/penetration) occurred at altitudes between 38,000 and 40,000 ft. The regions of highest risk for an aircraft to experience a direct lightning strike were the areas of thunderstorms where the ambient temperature was colder than -40 C and where the relative turbulence and precipitation intensities were characterized as negligible to light. The presence and location of lightning, therefore, did not necessarily indicate the presence and location of hazardous precipitation and turbulence. The total onboard data show that the lightning attachment patterns on this aircraft fall into four general categories, although the 1984 data suggest that the entire surface of the F-106B may be susceptible to lightning attachment.


    Directory of Open Access Journals (Sweden)

    Ana Carolina de Miranda Marzullo


    Full Text Available In martial arts and contact sports strikes are performed at near maximum speeds. For that reason, electromyography (EMG analysis of such movements is non-trivial. This paper has three main goals: firstly, to investigate the differences in the EMG activity of muscles during strikes performed with and without impacts; secondly, to assess the advantages of using Sum of Significant Power (SSP values instead of root mean square (rms values when analyzing EMG data; and lastly to introduce a new method of calculating median frequency values using wavelet transforms (WMDF. EMG data of the deltoid anterior (DA, triceps brachii (TB and brachioradialis (BR muscles were collected from eight Kung Fu practitioners during strikes performed with and without impacts. SSP results indicated significant higher muscle activity (p = 0.023 for the strikes with impact. WMDF results, on the other hand, indicated significant lower values (p = 0. 007 for the strikes with impact. SSP results presented higher sensitivity than rms to quantify important signal differences and, at the same time, presented lower inter-subject coefficient of variations. The result of increase in SSP values and decrease in WMDF may suggest better synchronization of motor units for the strikes with impact performed by the experienced Kung Fu practitioners

  11. Innovative modified hair follicle harvesting technique with reverse rake scalp elevator for lower occipital donor area in follicular unit extraction hair transplantation. (United States)

    Gharwade, Chandrakant Rambhau


    Follicular unit extraction (FUE) is one of the widely practiced minimally invasive follicular harvesting techniques employed during hair transplantation. FUE technique has an advantage of utilising lower occipital area and supra-auricular region as a safe donor area described by Unger, in addition to the standard occipital donor area used in strip method (follicular unit transplant). Despite its potential advantages such as rapid recovery, minimal scarring and reduced post-operative pain; its widespread acceptance is limited due to various factors in variable contribution like steeper learning curve and potentially higher follicular transection rates (FTRs). The main practical drawbacks in harvesting FUE from lower occipital donor region that lie inferior to the standard donor area, is its acute angle (10°-15°) of emergent hair from scalp skin, higher variance angle (15°-35°) between hairs below the skin and hair exit angle above the skin and comparatively loose scalp, preventing to provide stable platform for punching. Hair transplant surgeon faces difficulty in aligning and engaging the FUE punch leading to very high hair follicle transection rate, and therefore, it is not a preferred site for harvesting follicles in FUE. Authors description of modified technique using reverse rake scalp elevator helps in negating the acute angle of the hair follicles exit from scalp skin and reducing the variance angle between emergent hair and hair below the skin in lower occipital region thereby reducing FTR. Furthermore, an added advantage of reducing the overall operative time and surgeon fatigue, improve donor area healing, availability of a comparatively larger donor area which increases the confidence of the beginners. This method will be of help as it is easy to duplicate and follow by novice hair transplant surgeons and also for those who are routinely doing mega hair transplants sessions.

  12. Effect of hot-dip galvanizing processes on the microstructure and mechanical properties of 600-MPa hot-dip galvanized dual-phase steel (United States)

    Kuang, Chun-fu; Zheng, Zhi-wang; Wang, Min-li; Xu, Quan; Zhang, Shen-gen


    A C-Mn dual-phase steel was soaked at 800°C for 90 s and then either rapidly cooled to 450°C and held for 30 s (process A) or rapidly cooled to 350°C and then reheated to 450°C (process B) to simulate the hot-dip galvanizing process. The influence of the hot-dip galvanizing process on the microstructure and mechanical properties of 600-MPa hot-dip galvanized dual-phase steel (DP600) was investigated using optical microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and tensile tests. The results showed that, in the case of process A, the microstructure of DP600 was composed of ferrite, martensite, and a small amount of bainite. The granular bainite was formed in the hot-dip galvanizing stage, and martensite islands were formed in the final cooling stage after hot-dip galvanizing. By contrast, in the case of process B, the microstructure of the DP600 was composed of ferrite, martensite, bainite, and cementite. In addition, compared with the yield strength (YS) of the DP600 annealed by process A, that for the DP600 annealed by process B increased by approximately 50 MPa because of the tempering of the martensite formed during rapid cooling. The work-hardening coefficient ( n value) of the DP600 steel annealed by process B clearly decreased because the increase of the YS affected the computation result for the n value. However, the ultimate tensile strength (UTS) and elongation ( A 80) of the DP600 annealed by process B exhibited less variation compared with those of the DP600 annealed by process A. Therefore, DP600 with excellent comprehensive mechanical properties (YS = 362 MPa, UTS = 638 MPa, A 80 = 24.3%, n = 0.17) was obtained via process A.

  13. [The Teachers' Right to Strike Versus the Students' Right to an Education. (United States)

    Powell, Edward M.

    The speaker establishes himself in opposition to teacher strikes, outlines the scope of teacher strikes, discusses arguments for and against the right of teachers to strike, presents the kinds of strikes that are possible, outlines what a board and the administration can do to head off a strike, and presents the American Association of School…

  14. Associations of Blood Pressure Dipping Patterns With Left Ventricular Mass and Left Ventricular Hypertrophy in Blacks: The Jackson Heart Study. (United States)

    Abdalla, Marwah; Caughey, Melissa C; Tanner, Rikki M; Booth, John N; Diaz, Keith M; Anstey, D Edmund; Sims, Mario; Ravenell, Joseph; Muntner, Paul; Viera, Anthony J; Shimbo, Daichi


    Abnormal diurnal blood pressure (BP), including nondipping patterns, assessed using ambulatory BP monitoring, have been associated with increased cardiovascular risk among white and Asian adults. We examined the associations of BP dipping patterns (dipping, nondipping, and reverse dipping) with cardiovascular target organ damage (left ventricular mass index and left ventricular hypertrophy), among participants from the Jackson Heart Study, an exclusively black population-based cohort. Analyses included 1015 participants who completed ambulatory BP monitoring and had echocardiography data from the baseline visit. Participants were categorized based on the nighttime to daytime systolic BP ratio into 3 patterns: dipping pattern (≤0.90), nondipping pattern (>0.90 to ≤1.00), and reverse dipping pattern (>1.00). The prevalence of dipping, nondipping, and reverse dipping patterns was 33.6%, 48.2%, and 18.2%, respectively. In a fully adjusted model, which included antihypertensive medication use and clinic and daytime systolic BP, the mean differences in left ventricular mass index between reverse dipping pattern versus dipping pattern was 8.3±2.1 g/m 2 ( P pattern versus dipping pattern was -1.0±1.6 g/m 2 ( P =0.536). Compared with participants with a dipping pattern, the prevalence ratio for having left ventricular hypertrophy was 1.65 (95% CI, 1.05-2.58) and 0.96 (95% CI, 0.63-1.97) for those with a reverse dipping pattern and nondipping pattern, respectively. In this population-based study of blacks, a reverse dipping pattern was associated with increased left ventricular mass index and a higher prevalence of left ventricular hypertrophy. Identification of a reverse dipping pattern on ambulatory BP monitoring may help identify black at increased risk for cardiovascular target organ damage. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.

  15. DipTest: A litmus test for E. coli detection in water. (United States)

    Gunda, Naga Siva Kumar; Dasgupta, Saumyadeb; Mitra, Sushanta K


    We have developed a new litmus paper test (DipTest) for detecting Escherichia coli (E. coli) in water samples by performing enzymatic reactions directly on the porous paper substrate. The paper strip consists of a long narrow piece of cellulose blotting paper coated with chemoattractant (at bottom edge), wax hydrophobic barrier (at the top edge), and custom formulated chemical reagents (at reaction zone immediately below the wax hydrophobic barrier). When the paper strip is dipped in water, E. coli in the water sample is attracted toward the paper strip due to a chemotaxic mechanism followed by the ascent along the paper strip toward the reaction zone due to a capillary wicking mechanism, and finally the capillary motion is arrested at the top edge of the paper strip by the hydrophobic barrier. The E. coli concentrated at the reaction zone of the paper strip will react with custom formulated chemical reagents to produce a pinkish-red color. Such a color change on the paper strip when dipped into water samples indicates the presence of E. coli contamination in potable water. The performance of the DipTest device has been checked with different known concentrations of E. coli contaminated water samples using different dip and wait times. The DipTest device has also been tested with different interfering bacteria and chemical contaminants. It has been observed that the different interfering contaminants do not have any impact on the DipTest, and it can become a potential solution for screening water samples for E. coli contamination at the point of source.

  16. Changes in dip and frictional properties of the basal detachment controlling orogenic wedge propagation and frontal collapse: The external central Betics case (United States)

    Jimenez-Bonilla, A.; Torvela, T.; Balanyá, J. C.; Expósito, I.; Díaz-Azpiroz, M.


    Thin-skinned fold-and-thrust belts (FTBs) have been extensively studied through both field examples and modeling. The overall dynamics of FTBs are, therefore, well understood. One less understood aspect is the combined influence of across-strike changes in the detachment properties and the basement topography on the behavior of an orogenic wedge. In this paper, we use field data together with reflection seismic interpretation from the external zones of the central Betics FTB, southern Spain, to identify a significant increase in the wedge basal dip (a basement "threshold") coinciding with the pinch-out of a weak substrate. This induced both changes to the wedge geometry and to the basal friction, which in turn influenced the wedge dynamics. The changing dynamics led to a transient "stagnation" of the FTB propagation, topographic buildup, and subsequent collapse of the FTB front. This in turn fed an important Langhian depocenter made up of mass transport deposits. Coevally with the FTB propagation, extension took place both parallel and perpendicular to the orogenic trend. This case study illustrates how across-strike changes in wedge basal properties can control the detailed behavior of a developing FTB front, but questions remain regarding the time-space interaction and relative importance of the basal parameters.

  17. Isolated Sensorineural Hearing Loss as a Sequela after Lightning Strike

    Directory of Open Access Journals (Sweden)

    Mahfuz Turan


    Full Text Available In most of the surviving patients after a lightning strike, audiovestibular abnormalities have been reported. The most frequently reported type of abnormalities is a tympanic membrane perforation with hearing loss and external ear canal burn. However a sensor neural hearing loss and mixed type hearing loss can also occur, but these occur rarely. A nineteen-year-old female patient had, after a lightning strike, serious burns on the left ear, behind the ear, and on the chest and neck. She also had in her left ear 108 dB hearing loss with irregular central perforation and in her right ear 52 dB sensorineural hearing loss. There was no hearing loss before the strike. A hearing aid was recommended for the right ear and good care and follow-up were recommended for the left ear. A lightning strike can cause serious audiological damage. Therefore, it is necessary to make a careful audiovestibular evaluation of the patients. Although there exist rarely healed cases from sensorineural hearing loss after lightning strike in literature, in our case hearing loss occurred bilaterally and then it healed unilaterally. This condition is quite rare in literature.

  18. Predicting timing of foot strike during running, independent of striking technique, using principal component analysis of joint angles. (United States)

    Osis, Sean T; Hettinga, Blayne A; Leitch, Jessica; Ferber, Reed


    As 3-dimensional (3D) motion-capture for clinical gait analysis continues to evolve, new methods must be developed to improve the detection of gait cycle events based on kinematic data. Recently, the application of principal component analysis (PCA) to gait data has shown promise in detecting important biomechanical features. Therefore, the purpose of this study was to define a new foot strike detection method for a continuum of striking techniques, by applying PCA to joint angle waveforms. In accordance with Newtonian mechanics, it was hypothesized that transient features in the sagittal-plane accelerations of the lower extremity would be linked with the impulsive application of force to the foot at foot strike. Kinematic and kinetic data from treadmill running were selected for 154 subjects, from a database of gait biomechanics. Ankle, knee and hip sagittal plane angular acceleration kinematic curves were chained together to form a row input to a PCA matrix. A linear polynomial was calculated based on PCA scores, and a 10-fold cross-validation was performed to evaluate prediction accuracy against gold-standard foot strike as determined by a 10 N rise in the vertical ground reaction force. Results show 89-94% of all predicted foot strikes were within 4 frames (20 ms) of the gold standard with the largest error being 28 ms. It is concluded that this new foot strike detection is an improvement on existing methods and can be applied regardless of whether the runner exhibits a rearfoot, midfoot, or forefoot strike pattern. Copyright © 2014 Elsevier Ltd. All rights reserved.

  19. Setaria viridis floral-dip: A simple and rapid Agrobacterium-mediated transformation method

    Directory of Open Access Journals (Sweden)

    Polyana Kelly Martins


    Full Text Available Setaria viridis was recently described as a new monocotyledonous model species for C4 photosynthesis research and genetic transformation. It has biological attributes (rapid life cycle, small genome, diploid, short stature and simple growth requirements that make it suitable for use as a model plant. We report an alternative method of S. viridis transformation using floral dip to circumvent the necessity of tissue culture phase for transgenic plant regeneration. S. viridis spikes at boot stage were selected to be immersed in Agrobacterium suspension. T1 seeds could be identified in 1.5–2 months after floral dipping. We demonstrated through molecular analysis and RFP expression that seeds and resulting plants from dipped inflorescences were transformed. Our results suggest the feasibility of S. viridis floral dip transformation as a time-saving and cost-effective compared with traditional methods. To our knowledge, this is the first report using floral dip in S. viridis as an Agrobacterium-mediated transformation method.

  20. Migration velocity analysis using a transversely isotropic medium with tilt normal to the reflector dip

    KAUST Repository

    Alkhalifah, T.


    A transversely isotropic model in which the tilt is constrained to be normal to the dip (DTI model) allows for simplifications in the imaging and velocity model building efforts as compared to a general TTI model. Though this model, in some cases, can not be represented physically like in the case of conflicting dips, it handles all dips with the assumption of symmetry axis normal to the dip. It provides a process in which areas that meet this feature is handled properly. We use efficient downward continuation algorithms that utilizes the reflection features of such a model. For lateral inhomogeneity, phase shift migration can be easily extended to approximately handle lateral inhomogeneity, because unlike the general TTI case the DTI model reduces to VTI for zero dip. We also equip these continuation algorithms with tools that expose inaccuracies in the velocity. We test this model on synthetic data of general TTI nature and show its resilience even couping with complex models like the recently released anisotropic BP model.

  1. Strike-slip tectonics within the northernmost Philippine Sea plate in an arc-continent collisional setting (United States)

    Gong, Wei; Jiang, Xiaodian; Guo, Yufan; Xing, Junhui; Li, Congying; Sun, Yang


    The geological processes in the northernmost Philippine Sea plate, which is bounded by the Suruga and Sagami troughs, are a typical example of an active collision zone. We attempt to illustrate the stress field through seismic estimations and geodetic analysis and propose the kinematic mode of the northernmost tip of the Philippine Sea plate. Seven events (M ≥ 4.0) are chosen for waveform inversion by the ISOLA software to distinguish the stress field. In particular, six of the chosen events, which exhibit strike-slip motion, are distributed in the eastern area, where few focal mechanisms have been reported by previous studies. According to the available focal mechanisms, strike-slip faults with similar P and T axes are widely distributed in the study area. The stress inversion suggests that the northern area is characterized by a NW-SE compression and a NE-SW extension stress regime, although some spatial differences exist. As indicated by an analysis of the geodesy, epicenters, focal mechanisms, gravity anomalies and velocity structure, the deformation in the northernmost tip is mainly accommodated by several conjugate strike-slip fault systems with steep dips that center on the Izu volcanic line. Generally, the maximum principal stress of the kinematics is derived from the collision between the Philippine Sea plate and Central Japan. Because of the different subduction angles, rates and directions of the down-going plate, diverging slab-pull forces along the Suruga and Sagami troughs may be causing the NE-NNE extension in most of the areas that are bounded by the two troughs. The extension propagates southwards along the Izu volcanic line and reaches the area adjacent to Miyake-jima.


    International Nuclear Information System (INIS)



    For START III level forces, strike allocations and magnitudes vary little with L, but first strike costs vary directly with L, which means that for K reflecting a preference for the survival of high value targets over their destruction and a preference for high value over military targets, the costs of action are far greater than those of inaction for a wide range of values of damage preference L. Thus, if both sides have much greater preferences for the survival of their high value targets than for military targets or destruction, they do not see a net incentive to strike, and crises are terminated by inaction. Recent decades suggest strong preferences for the survival of high value and that this has contributed to the lack of direct conflict during that period

  3. Comparison of blade-strike modeling results with empirical data

    Energy Technology Data Exchange (ETDEWEB)

    Ploskey, Gene R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carlson, Thomas J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)


    This study is the initial stage of further investigation into the dynamics of injury to fish during passage through a turbine runner. As part of the study, Pacific Northwest National Laboratory (PNNL) estimated the probability of blade strike, and associated injury, as a function of fish length and turbine operating geometry at two adjacent turbines in Powerhouse 1 of Bonneville Dam. Units 5 and 6 had identical intakes, stay vanes, wicket gates, and draft tubes, but Unit 6 had a new runner and curved discharge ring to minimize gaps between the runner hub and blades and between the blade tips and discharge ring. We used a mathematical model to predict blade strike associated with two Kaplan turbines and compared results with empirical data from biological tests conducted in 1999 and 2000. Blade-strike models take into consideration the geometry of the turbine blades and discharges as well as fish length, orientation, and distribution along the runner. The first phase of this study included a sensitivity analysis to consider the effects of difference in geometry and operations between families of turbines on the strike probability response surface. The analysis revealed that the orientation of fish relative to the leading edge of a runner blade and the location that fish pass along the blade between the hub and blade tip are critical uncertainties in blade-strike models. Over a range of discharges, the average prediction of injury from blade strike was two to five times higher than average empirical estimates of visible injury from shear and mechanical devices. Empirical estimates of mortality may be better metrics for comparison to predicted injury rates than other injury measures for fish passing at mid-blade and blade-tip locations.

  4. Influence of dipping cycles on physical, optical, and electrical properties of Cu 2 NiSnS 4 : Direct solution dip coating for photovoltaic applications

    Energy Technology Data Exchange (ETDEWEB)

    Mokurala, Krishnaiah; Mallick, Sudhanshu; Bhargava, Parag; Siol, Sebastian; Klein, Talysa R.; van Hest, Maikel F. A. M.


    Direct solution coating technique has emerged as a promising economically viable process for earth abundant chalcogenide absorber materials for photovoltaic applications. Here, direct ethanol based dip coating of earth abundant Cu2NiSnS4 (CNTS) films on soda lime glass (SLG), molybdenum coated glass (Mo), and fluorine doped tin oxide coated glass (FTO) substrates is investigated. The structural and morphological properties of pre-annealed and sulfurized CNTS films coated on SLG, FTO, and Mo substrates are reported. The influence of dipping cycles on composition and optoelectronic properties of pre-annealed and sulfurized CNTS films deposited on SLG substrate is presented. Energy dispersive spectroscopy (EDS) and X-ray fluorescence (XRF) analysis reveal how changes in thickness and elemental composition affect morphology and optoelectronic properties. The obtained absorption coefficient, optical bandgap, resistivity and mobility of pre - annealed and sulfurized films are found to be 104 cm-1, 1.5 eV, 0.48 Ocm, 3.4 cm2/Vs and 104 cm-1, 1.29 eV, 0.14 Ocm, 11.0 cm2/Vs, respectively. These properties are well suited for photovoltaic applications and lead to the conclusion that the direct ethanol based dip coating can be an alternative economically viable process for the fabrication of earth abundant CNTS absorber layers for thin film solar cells.

  5. [Force-feeding of hunger-striking prisoners]. (United States)

    Glick, Shimon


    In contrast to the position of the World Medical Association and the Ethics Council of the Israel Medical Association, the author argues for forced-feeding of hunger-striking prisoners when their condition reaches a stage of danger of death or permanent injury. This position is based on the priority of human life over autonomy, and of a communitarian ethic. This position is supported by a District Court decision ordering the feeding of a hunger-striking prisoner, by a Supreme Court decision imposing surgery on a non-consenting prisoner, and in line with Israel's Patient's Right Law.

  6. Sound Quality and Striking Position of a Conga Drum

    Directory of Open Access Journals (Sweden)

    Dylan Harvey


    Full Text Available The relationship between the location at which a drum membrane was struck and the quality of sound produced was investigated by striking the drum at several distances between the center and the rim. Through analyzing the harmonics of the wave produced from the impact, it was shown that as the striking location changes, the relative amplitudes of different modes of vibration also changes. It was found that sound of a higher pitch is produced at the rim of the drum than anywhere else on the drum head due to higher modes of vibration becoming dominant.


    Directory of Open Access Journals (Sweden)

    Paul L. Butterworth


    Full Text Available On August 3, 1981, 13,000 air traffic controllers walked off the job. Under US law, the strike was illegal. President Ronald Reagan ordered the strikers as a group to return to work; when they did not, he ordered individual strikers to return, and again they refused. Two days later the president fired the strikers. Reagan's action transformed relations between organized labor and American management, and created the worst turbulence to hit the American airways in recent history. “More Than a Labor Dispute” examines the work stoppage and aftermath through the eyes of two controllers and a pilot, all of whom worked during the strike.

  8. Remarkable rates of lightning strike mortality in Malawi. (United States)

    Mulder, Monique Borgerhoff; Msalu, Lameck; Caro, Tim; Salerno, Jonathan


    Livingstone's second mission site on the shore of Lake Malawi suffers very high rates of consequential lightning strikes. Comprehensive interviewing of victims and their relatives in seven Traditional Authorities in Nkhata Bay District, Malawi revealed that the annual rate of consequential strikes was 419/million, more than six times higher than that in other developing countries; the rate of deaths from lightning was 84/million/year, 5.4 times greater than the highest ever recorded. These remarkable figures reveal that lightning constitutes a significant stochastic source of mortality with potential life history consequences, but it should not deflect attention away from the more prominent causes of mortality in this rural area.

  9. Nocturnal antihypertensive treatment in patients with type 1 diabetes with autonomic neuropathy and non-dipping

    DEFF Research Database (Denmark)

    Hjortkjær, Henrik Øder; Jensen, Tonny; Kofoed, Klaus F


    and non-dipping were included, consisting of mixed gender and Caucasian origin. Mean±SD age, glycosylated haemoglobin and diabetes duration were 60±7 years, 7.9±0.7% (62±7 mmol/mol) and 36±11 years. INTERVENTIONS: In this randomised, placebo-controlled, double-blind cross-over study, the patients were.......1% to 4.5%; p=0.07)). No difference was found on measures of LVF (p≥0.15). No adverse events were registered during the study. CONCLUSIONS: We demonstrated that patients with T1D with CAN and non-dipping can be treated with an ACE inhibitor at night as BD as opposed to MD increased BP dipping, thereby...

  10. The adhesion of epoxy cataphoretic coating on phosphatized hot-dip galvanized steel

    Directory of Open Access Journals (Sweden)

    Bajat Jelena B.


    Full Text Available The influence of hot-dip galvanized steel surface pretreatment on the adhesion of epoxy cataphoretic coating was investigated. Phosphate coatings were deposited on hot-dip galvanized steel and the influence of fluoride ions in the phosphating plating bath, as well as the deposition temperature of the plating bath, were investigated. The dry and wet adhesion of epoxy coating were measured by a standard pull-off method. The surface roughness of phosphatized galvanized steel was determined, as well as the wettability of the metal surface by emulsion of the epoxy resin in water. The adhesion of epoxy coatings on phosphatized hot-dip galvanized steel was investigated in 3wt.%NaCI.

  11. Transformation of intermetallic layer due to oxidation heat treatment on hot-dipped aluminium coated steel

    International Nuclear Information System (INIS)

    Hishamuddin Husain; Abdul Razak Daud; Muhamad Daud; Nadira Kamarudin


    Heat treatment was introduced onto the aluminum coated low carbon steel to promote the formation of thin layer of oxide for enhancement of oxidation protection of steel. This process has transformed the existing intermetallic layer formed during hot dip aluminising process. Experiment was conducted on the low carbon steel substrates with 10 mm x 10 mm x 2 mm dimension. Hot dip aluminising of low carbon steel was carried out at 750 degree Celsius dipping temperature in a molten pure aluminum for 5 minutes. Aluminized samples were heat treated at 600, 700, 800, and 900 degree Celsius for 1 hour. X-ray Diffraction (XRD), Scanning Electron Microscope (SEM) and EDAX were used in investigation. From the observation, it showed the intermetallic thickness increased with the increase in temperature. The result of EDAX analysis revealed the existence of oxide phase and the intermetallics. The XRD identified the intermetallics as Fe 2 Al 5 and FeAl 3 . (Author)

  12. Detecting Power Voltage Dips using Tracking Filters - A Comparison against Kalman

    Directory of Open Access Journals (Sweden)

    STANCIU, I.-R.


    Full Text Available Due of its significant economical impact, Power-Quality (PQ analysis is an important domain today. Severe voltage distortions affect the consumers and disturb their activity. They may be caused by short circuits (in this case the voltage drops significantly or by varying loads (with a smaller drop. These two types are the PQ currently issues. Monitoring these phenomena (called dips or sags require powerful techniques. Digital Signal Processing (DSP algorithms are currently employed to fulfill this task. Discrete Wavelet Transforms, (and variants, Kalman filters, and S-Transform are currently proposed by researchers to detect voltage dips. This paper introduces and examines a new tool to detect voltage dips: the so-called tracking filters. Discovered and tested during the cold war, they can estimate a parameter of interest one-step-ahead based on the previously observed values. Two filters are implemented. Their performance is assessed by comparison against the Kalman filter?s results.

  13. The Rake and the X

    DEFF Research Database (Denmark)

    Johansen, Tine Rosenthal; Henriksen, Thomas Duus


    This paper illustrates two models for using learning games to teach across disciplines and classes. Two different learning games are used for bringing together students from different courses to facilitate cross-disciplinary classes on management and organisational learning....

  14. Geomagnetic and sunspot activity associations and ionospheric effects of lightning phenomena at Trivandrum near dip equator (United States)

    Girish, T. E.; Eapen, P. E.


    From a study of thunder/lightning observations in Trivandrum (near dip equator) for selected years between 1853 and 2005, we could find an inverse relation of the same with sunspot activity and associations with enhancements in diurnal range of local geomagnetic declination. The results seem to suggest lightning-associated modulation of E-region dynamo currents in the equatorial ionosphere and the thunderstorm activity near dip equator probably acts as a moderator to regulate electric potential gradient changes in the global electric circuit due to solar activity changes.

  15. Mitigation of Voltage Dip and Voltage Flickering by Multilevel D-STATCOM

    Directory of Open Access Journals (Sweden)

    M. S. Ballal


    Full Text Available The basic power quality problems in the distribution network are voltage sag (dip, voltage flickering, and the service interruptions. STATCOM is a Flexible AC Transmission Systems (FACTS technology device which can independently control the flow of reactive power. This paper presents the simulation and analysis of a STATCOM for voltage dip and voltage flickering mitigation. Simulations are carried out in MATLAB/Simulink to validate the performance of the STATCOM. A comparison between the six-pulse inverter and the five-level diode-clamped inverter is carried out for the performance of 66/11 KV distribution system.

  16. EDITORIAL Plagiarism - time to strike at the epidemic

    African Journals Online (AJOL)


    Plagiarism - time to strike at the epidemic. Lukman Yusuf1, Abraham Aseffa2. We live in a globalized world where information is instantly shared across continents. The number of biomedical journals available for reference is quite enormous and there is a sudden huge surge of free open access journals in the last few years ...

  17. The Eastern Pacific Tropical Cyclone Strike Probability Program (EPSTRKP). (United States)


    of nine preselected points of interest. Although subject to change the points currently listed within the program are: Acapulco, Mazatlan, Puerto ... Vallarta , La Paz, San Diego, Hilo, Honolulu, Johnston Island and Midway Island. The strike probabilities, computed upon receipt of each 6-hourly warning

  18. Effects of Union Organization on Strike Incidence in EU Companies

    NARCIS (Netherlands)

    Jansen, Giedo


    The author reinvestigates the relationship between the organizational power of trade unions and strikes based on data from the European Company Survey 2009 (ECS-2009) and the Institutional Characteristics of Trade Unions, Wage Setting, State Intervention and Social Pacts (ICTWSS) database, which

  19. Monte Carlo Simulation to Estimate Likelihood of Direct Lightning Strikes (United States)

    Mata, Carlos; Medelius, Pedro


    A software tool has been designed to quantify the lightning exposure at launch sites of the stack at the pads under different configurations. In order to predict lightning strikes to generic structures, this model uses leaders whose origins (in the x-y plane) are obtained from a 2D random, normal distribution.

  20. Torts Liability for Strike Action and Third Party Rights. (United States)

    Raday, Frances


    Studies the nature of the torts liability incurred in strikes and the extent of existing immunities bestowed on strikers and their organizers, and explores the principles that should govern liability and immunity. Available from Israel Law Review Association, c/o Faculty of Law, Hebrew University of Jerusalem, Mount Scopus, P.O.B. 24100, Jerusalem…

  1. Nurses need the right to strike to protect patients. (United States)

    Harrison, Malcolm


    Four of your readers panellists were asked if the RCN should be affiliated to the Trades Union Congress (reflections April 4). One of them said the RCN needs to modernise and join the wider trade union movement, but 'should keep the "no strike" policy that has always served it so well'.

  2. Analysis of the effects of frequent strikes on academic performance ...

    African Journals Online (AJOL)

    The history of Academic Staff Union of Universities (ASUU)'s strike can be traced back to 1978, the period of the beginning of the decline in the oil boom, when the country faced the consequences of the failure by its rulers to use the oil wealth to generate production and a social welfare system. Military dictatorship had ...

  3. On Striking for a Bargain between Two Completely Informed Agents

    NARCIS (Netherlands)

    Houba, H.E.D.; Wen, Q.


    This paper provides a thorough equilibrium analysis of a wage contract negotiation model where the union must choose between strike and holdout between offers and counter-offers. When the union and the firm have different discount factors, delay in reaching an agreement may Pareto dominate many

  4. Assemblage of strike-slip faults and tectonic extension and ...

    Indian Academy of Sciences (India)


    and its effect on the productivity of the tight reservoirs. The study will not only guide. 95 the oil-gas ..... 5 Effect of tectonic extension and compression on coal reservoir productivity. 288. 5.1 Strike-slip compression and ..... staff of all the authors that cooperated in performing the analyses. We are also. 425 grateful to the ...

  5. Assemblage of strike-slip faults and tectonic extension and ...

    Indian Academy of Sciences (India)


    Assemblage of strike-slip faults and tectonic. 1 extension and compression analysis: A case. 2 study of a Lower Permian commercial coal. 3 reservoir in China. 4. 5. Shuai Yina,*, Dawei Lvb, Zhonghu Wu c .... high-quality reservoirs, and tectonic action is a leading factor for oil and gas. 70 enrichment. Therefore, it is of great ...


    African Journals Online (AJOL)



    Jun 5, 2012 ... These include staff training and retraining, developing good data bank based on .... wildlife is very important in bird control. Successful habitat ... Designated staff patrols the airside areas using chemical repellants, propane cannons, distress call. Birds/Wildlife Strikes Control for Safer Air .................Usman et ...


    African Journals Online (AJOL)


    Oct 6, 2014 ... MDCN Code of ethics intends to give right for cessation of work by workers in the health sector of the economy. Thus under the Common Law, a strike, especially in the essential services is a breach of the contract of employment. The Trade. Union (amendment) Act (Federal Republic of. Nigeria, 2005) ...

  8. Growth control of kalanchoe cultivars Rako and Gold Strike by ...

    African Journals Online (AJOL)

    This study was conducted to test the potential of paclobutrazol and uniconazole used at the propagation stage as a plant growth retardant (PGR) of kalanchoe cultivars Rako and Gold Strike. Three node terminal cuttings were soaked in 500 mL of 0.05, 0.25, or 0.50 mg·L-1 paclobutrazol or uniconazole solution for 2 h.

  9. Striking Inside Angola with 32 Battalion | Scheepers | Scientia ...

    African Journals Online (AJOL)

    Scientia Militaria: South African Journal of Military Studies. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 42, No 1 (2014) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Striking Inside Angola with 32 ...

  10. Force, reaction time, and precision of Kung Fu strikes. (United States)

    Neto, Osmar Pinto; Bolander, Richard; Pacheco, Marcos Tadeu Tavares; Bir, Cynthia


    The goal was to compare values of force, precision, and reaction time of several martial arts punches and palm strikes performed by advanced and intermediate Kung Fu practitioners, both men and women. 13 Kung Fu practitioners, 10 men and three women, participated. Only the men, three advanced and seven intermediate, were considered for comparisons between levels. Reaction time values were obtained using two high speed cameras that recorded each strike at 2500 Hz. Force of impact was measured by a load cell. For comparisons of groups, force data were normalized by participant's body mass and height. Precision of the strikes was determined by a high speed pressure sensor. The results show that palm strikes were stronger than punches. Women in the study presented, on average, lower values of reaction time and force but higher values of precision than men. Advanced participants presented higher forces than intermediate participants. Significant negative correlations between the values of force and precision and the values of force and reaction time were also found.

  11. Case Report: Mass Casualty Lightning Strike at Ranger Training Camp. (United States)

    Thompson, Shannon N; Wilson, Zachary W; Cole, Christopher B; Kennedy, Andrew R; Aycock, Ryan D


    Although lightning strikes are a rare occurrence, their significance cannot be ignored given military operations in the field during all types of weather. With proper medical management, patients with lightning injuries can return to duty. Information for this case report comes from eyewitness account at the 6th Ranger Training Battalion and from review of physician documentation from the 96th Medical Group, Eglin Air Force Base, Florida. A lightning strike injured 44 Ranger School participants during a training exercise on August 12, 2015, at Camp Rudder, Florida. These patients were triaged in the field and transported to emergency department of Eglin Air Force Base. Of the 44 casualties, 20 were admitted. All were returned to duty the following day. One patient had cardiac arrest. This patient, along with two others, was admitted to the intensive care unit. Seventeen other patients were admitted for observation for rhabdomyolysis and/or cardiac arrhythmias. One patient was admitted with suspected acute kidney injury indicated by an elevated creatinine. All patients, including those admitted to the intensive care unit, were released on the day following the lightning strike without restrictions and were allowed to return to duty with increased medical monitoring. This case report highlights the need for proper triage and recognition of lightning strike injury, coordination of care between field operations and emergency department personnel, and close follow-up for patients presenting with lightning injury. Symptoms, physical exam, and laboratory findings from rigorous training can be difficult to distinguish from those resulting from lightning injury. Secondary injuries resulting from blunt trauma from falls may have been prevented by the use of the lightning strike posture. Further analysis of procedures and standard operating protocols to mitigate risk during thunderstorms may be required to prevent lightning's effects on large groups of military personnel

  12. Management of patients during hunger strike and refeeding phase. (United States)

    Eichelberger, M; Joray, M L; Perrig, M; Bodmer, M; Stanga, Z


    Hunger strikers resuming nutritional intake may develop a life-threatening refeeding syndrome (RFS). Consequently, hunger strikers represent a core challenge for the medical staff. The objective of the study was to test the effectiveness and safety of evidence-based recommendations for prevention and management of RFS during the refeeding phase. This was a retrospective, observational data analysis of 37 consecutive, unselected cases of prisoners on a hunger strike during a 5-y period. The sample consisted of 37 cases representing 33 individual patients. In seven cases (18.9%), the hunger strike was continued during the hospital stay, in 16 episodes (43.2%) cessation of the hunger strike occurred immediately after admission to the security ward, and in 14 episodes (37.9%) during hospital stay. In the refeed cases (n = 30), nutritional replenishment occurred orally, and in 25 (83.3%) micronutrients substitutions were made based on the recommendations. The gradual refeeding with fluid restriction occurred over 10 d. Uncomplicated dyselectrolytemia was documented in 12 cases (40%) within the refeeding phase. One case (3.3%) presented bilateral ankle edemas as a clinical manifestation of moderate RFS. Intensive medical treatment was not necessary and none of the patients died. Seven episodes of continued hunger strike were observed during the entire hospital stay without medical complications. Our data suggested that seriousness and rate of medical complications during the refeeding phase can be kept at a minimum in a hunger strike population. This study supported use of recommendations to optimize risk management and to improve treatment quality and patient safety in this vulnerable population. Copyright © 2014 Elsevier Inc. All rights reserved.


    Directory of Open Access Journals (Sweden)

    Dimas Salomo Januarianto Sianipar


    Full Text Available Salah satu gempabumi merusak yang terjadi di Indonesia pada tahun 2012 yaitu gempabumi Ransiki, Papua Barat 21 April 2012, Mw 6,7. Yang menarik dari gempabumi ini yaitu lokasi gempabumi yang berdekatan dengan dua sesar, yaitu sesar Ransiki dan sesar Yapen sehingga tujuan penelitian ini yaitu membuat pemodelan dan menganalisis mekanisme sumber gempabumi untuk mengetahui sesar penyebab gempabumi Ransiki. Mekanisme sumber gempabumi dimodelkan dari proses inversi tensor momen menggunakan program Isola. Untuk menentukan bidang sesar sebenarnya digunakan program HC-plot. Hasil inversi tensor momen menunjukan bahwa gempabumi Ransiki merupakan gempabumi mekanisme sesar geser dengan bidang nodal 1; strike 3550, dip 680, rake -1650 dan bidang nodal 2; strike 2590, dip 760, rake -230. Pengolahan dengan program HC-plot menghasilkan bidang sesar sebenarnya yaitu bidang nodal 2 dengan strike 2590, dip 760, rake -230. Hasil ini menunjukan bahwa gempabumi Ransiki 21 April 2012 Mw 6,7, disebabkan oleh sesar Yapen dengan mekanisme sesar geser mengiri berarah barat-timur.

  14. Implications of Incessant Strike Actions on the Implementation of Technical Education Programme in Nigeria (United States)

    Adavbiele, J. A.


    This paper was designed to x-ray the implications of incessant strike actions on the implementation of Technical education programme in Nigeria. The paper took an exploratory view on the concept of strike actions in Nigeria with particular references on notable strike actions that have occurred in Nigeria. The types of strike were explained and…

  15. Control of Listeria monocytogenes on frankfurters by dipping in hops beta acids solutions. (United States)

    Shen, Cangliang; Geornaras, Ifigenia; Kendall, Patricia A; Sofos, John N


    Hops beta acids (HBA) are parts of hops flowers used in beer brewing and have shown antilisterial activity in bacteriological broth. The U.S. Department of Agriculture, Food Safety and Inspection Service has approved HBA for use to control Listeria monocytogenes on ready-to-eat meat products. This study evaluated the effects of HBA as dipping solutions to control L. monocytogenes during storage of frankfurters. Frankfurters (two replicates and three samples each) were inoculated (1.9 +/- 0.1 log CFU/cm2) with L. monocytogenes (10-strain mixture), dipped (2 min, 25 +/- 2 degrees C) in HBA solutions (0.03, 0.06, and 0.10%) or distilled water, and then vacuum packaged and stored at 4 or 10 degrees C for up to 90 and 48 days, respectively. Samples were periodically analyzed for microbial survival and growth on tryptic soy agar plus 0.6% yeast extract and PALCAM agar. Dipping in HBA solutions caused immediate L. monocytogenes reductions (P model confirmed that the lag-phase duration of the pathogen was extended, and the growth rate was decreased on samples dipped in HBA solutions. Therefore, HBA may be considered for use to improve the microbial safety of ready-to-eat meat products, provided that future studies show no adverse effects on sensory qualities and that their use is economically feasible.

  16. Effect of Nicotine on Audio and Visual Reaction Time in Dipping ...

    African Journals Online (AJOL)

    Dipping tobacco is a form of smokeless tobacco. Smokeless tobacco usage in the Indian subcontinent has increased markedly than that of the smoking tobacco users. Global adult tobacco survey conducted in 2009-10 by WHO reported this emerging population of smokeless tobacco users in India. Nicotine through blood is ...

  17. Plateaus, Dips, and Leaps: Where to Look for Inventions and Discoveries during Skilled Performance (United States)

    Gray, Wayne D.; Lindstedt, John K.


    The framework of "plateaus, dips, and leaps" shines light on periods when individuals may be inventing new methods of skilled performance. We begin with a review of the role "performance plateaus" have played in (a) experimental psychology, (b) human-computer interaction, and (c) cognitive science. We then reanalyze two classic…

  18. Static deformation due to a long buried dip-slip fault in an isotropic ...

    Indian Academy of Sciences (India)

    Abstract. Closed-form analytical expressions for the displacements and the stresses at any point of a two-phase medium consisting of a homogeneous, isotropic, perfectly elastic half-space in welded contact with a homogeneous, orthotropic, perfectly elastic half-space due to a dip-slip fault of finite width located at an.

  19. Influence of joint dip angle on seismic behaviors of rock foundation

    International Nuclear Information System (INIS)

    Yang, Lei; Gao, Yang; Jiang, Yujing; Li, Bo; Li Shucai


    The seismic response of rock foundation to seismic loads is an important issue to the stability and safety of nuclear power plants. Due to the fact that the discontinuities like joints existing in the rock mass govern principally the deformation and failure behaviors of the rock mass, the influence of discontinuities on the seismic behaviors of rock mass remains as one of the fundamental problems in the safety assessment of nuclear power plants. In this study, the distinct element method (DEM) and finite element method (FEM) were adopted to investigate the seismic responses of rock foundation to a real seismic wave, taking into account the effect of joint dip angle on the deformation and dynamic behaviors of rock foundation. In the DEM simulations, the intact rock has an amplification effect on the amplitudes of seismic waves, while the joints exhibit an attenuation effect on the seismic waves. In the FEM simulations, however, the attenuation effect of joints is not obvious. The dip angle of joints has strong effects on the deformation and dynamic behaviors of rock foundation, in terms that different dip angles lead to obviously different deformation and horizontal stress in the rock foundation when subjected to seismic load. When the dip angle of joints is around 60deg, the seismic velocity, displacement and stress reach the maximums. Therefore, attentions need to be paid on this factor during the seismic design of nuclear power plants. (author)

  20. Cultural differences in ant-dipping tool length between neighbouring chimpanzee communities at Kalinzu, Uganda. (United States)

    Koops, Kathelijne; Schöning, Caspar; Isaji, Mina; Hashimoto, Chie


    Cultural variation has been identified in a growing number of animal species ranging from primates to cetaceans. The principal method used to establish the presence of culture in wild populations is the method of exclusion. This method is problematic, since it cannot rule out the influence of genetics and ecology in geographically distant populations. A new approach to the study of culture compares neighbouring groups belonging to the same population. We applied this new approach by comparing ant-dipping tool length between two neighbouring communities of chimpanzees (Pan troglodytes schweinfurthii) in the Kalinzu Forest, Uganda. Ant-dipping tool length varies across chimpanzee study sites in relation to army ant species (Dorylus spp.) and dipping location (nest vs. trail). We compared the availability of army ant species and dipping tool length between the two communities. M-group tools were significantly longer than S-group tools, despite identical army ant target species availabilities. Moreover, tool length in S-group was shorter than at all other sites where chimpanzees prey on epigaeic ants at nests. Considering the lack of ecological differences between the two communities, the tool length difference appears to be cultural. Our findings highlight how cultural knowledge can generate small-scale cultural diversification in neighbouring chimpanzee communities.

  1. Structural modification and band gap engineering of sol–gel dip

    Indian Academy of Sciences (India)

    In the present study, we investigated the effect of vacuum annealing on the structural and optical properties of sol–gel dip-coated thin films of Zn 0.75 Mg 0.25 O alloy. XRD studies revealed that all these films werepolycrystalline with hexagonal wurtzite structure and there was no trace of additional phases other than ZnO.

  2. Voltage dip caused by the sequential energization of wind turbine transformers

    DEFF Research Database (Denmark)

    Arana Aristi, Iván; Holbøll, Joachim; Sørensen, T.


    THIS paper presents the results from electromagnetic transient (emt) simulations using PSCAD, where the model of Nysted Offshore Wind Farm (NOWF) was created to simulate the voltage dips due to wind turbine transformer energization. Four different sequences energizing different numbers of wind tu...

  3. Corrosion behaviour of hot dip zinc and zinc-aluminium coatings

    Indian Academy of Sciences (India)

    A comparative investigation of hot dip Zn–25Al alloy, Zn–55Al–Si and Zn coatings on steel was performed with attention to their corrosion performance in seawater. The results of 2-year exposure testing of these at Zhoushan test site are reported here. In tidal and immersion environments, Zn–25Al alloy coating is several ...

  4. Control of the Lance Nematode, Hoplolaimus galeatus, on 'Tifdwarf' Bermudagrass by Chemical Dips. (United States)

    Johnson, A W


    Dipping of bare-rooted 'Tifdwarf' bermudagrass sprigs in 1000 ppm of the 2,4-dichlorophenyl ester of methanesulfonic acid plus 2150 ppm 1,2-dibromo-3-chloropropane or in 1000 ppm ethyl 4-(methylthio)-m-tolyl isopropyl phosphoramidate for 30 min eliminated Hoplolaimus galeatus (Cobb) Thorne. No phytotoxic effect was observed and bermudagrass growth was improved.

  5. The hyperbolic sine relation and dip test data in constant strain rate compression experiments

    Czech Academy of Sciences Publication Activity Database

    Kruml, Tomáš; Coddet, O.; Martin, J. L.


    Roč. 240, - (2010), 012028 ISSN 1742-6588. [ICSMA-15 (15th International Conference on the Strength of Materials). Dresden, 16.08.2009-21.08.2009] Institutional research plan: CEZ:AV0Z20410507 Keywords : dip test * effective stress * compression Subject RIV: JJ - Other Materials

  6. Construction of a Dip Tank for Finishing Wood Siding or Decking (United States)

    Mark Knaebe


    Dipping new siding or decking pieces before installation is faster than finishing after installation, and it gets finish on the backside and ends of the pieces, thereby extending their service life. This method is appropriate for any penetrating finish, such as waterrepellent preservatives or semitransparent stains. It may also be used to pre-treat siding with water-...

  7. A facile two-step dipping process based on two silica systems for a superhydrophobic surface. (United States)

    Li, Xiaoguang; Shen, Jun


    A silica microsphere suspension and a silica sol are employed in a two-step dipping process for the preparation of a superhydrophobic surface. It's not only a facile way to achieve the lotus effect, but can also create a multi-functional surface with different wetabilities, adhesive forces and transparencies. This journal is © The Royal Society of Chemistry 2011

  8. Plateaus, Dips, and Leaps: Where to Look for Inventions and Discoveries During Skilled Performance. (United States)

    Gray, Wayne D; Lindstedt, John K


    The framework of plateaus, dips, and leaps shines light on periods when individuals may be inventing new methods of skilled performance. We begin with a review of the role performance plateaus have played in (a) experimental psychology, (b) human-computer interaction, and (c) cognitive science. We then reanalyze two classic studies of individual performance to show plateaus and dips which resulted in performance leaps. For a third study, we show how the statistical methods of Changepoint Analysis plus a few simple heuristics may direct our focus to periods of performance change for individuals. For the researcher, dips become the marker of exploration where performance suffers as new methods are invented and tested. Leaps mark the implementation of a successful new method and an incremental jump above the path plotted by smooth and steady log-log performance increments. The methods developed during these dips and leaps are the key to surpassing one's teachers and acquiring extreme expertise. Copyright © 2016 Cognitive Science Society, Inc.

  9. A dip-slide test for bacteriuria in protein-calorie malnutrition ...

    African Journals Online (AJOL)

    A simple dip-slide test was used to determine the incidence of bacteriuria in children suffering from protein-calorie malnutrition. Bacteriuria was found to be equally common in patients suffering from kwashiorkor and atrophic malnutrition and in a control group with normal nutritional status. The test is inexpensive and has a ...

  10. Fine structures in Fe3Al alloy layer of a new hot dip aluminized steel

    Indian Academy of Sciences (India)


    structure and performance in the coating can be improved and service life of the aluminized steel can significantly be enhanced. 2. Experimental. The base metal of the aluminized steel used in this inves- tigation was mild steel (0⋅18%C), which was aluminized by the hot dip aluminizing technology (HDA). In order to.

  11. Comparison of control strategies for DFIG under symmetrical grid voltage dips

    DEFF Research Database (Denmark)

    Chen, Wenjie; Xu, Dehong; Chen, Min


    This paper presents a series of current control strategies for the DFIG under symmetrical grid voltage dips. The controllable range, the damping time constant of the stator natural flux and the torque fluctuations of six control strategies are analyzed and compared. The control strategies which...

  12. UV spectroscopy of Z Chamaeleontis. I - Time dependent dips in superoutburst (United States)

    Harlaftis, E. T.; Hassall, B. J. M.; Naylor, T.; Charles, P. A.; Sonneborn, G.


    Extensive IUE observations of the dwarf nova Z Cha during the 1987 April superoutburst and IUE-Exosat observations during the 1985 July superoutburst are presented. The UV light curve shows two dips when folded on the orbital period. One dip, at orbital phase 0.8 becomes shallower as the superoutburst progresses and can be associated with decreasing mass transfer rate from the secondary star. The other dip, at orbital phase 0.15, appears after the development of the superhump and some days after the occurrence of the largest dip at phase 0.8. The continuum flux distribution during superoutbursts is fainter and redder than in low-inclination dwarf novae during superoutbursts. This is interpreted in terms of the extended vertical disk structure which occults the hot inner parts of the disk with the development of a 'cool' bulge on the edge of the disk at orbital phase 0.75. Details of the behaviour of the UV emission lines during eclipse and away from eclipse are discussed.

  13. Relation between microstructure and adhesion of hot dip galvanized zinc coatings on dual phase steel

    NARCIS (Netherlands)

    Song, G. M.; Vystavel, T.; De Hosson, J. Th M.; Sloof, W. G.; van der Pers, N.M.

    The microstructure of hot dip galvanized zinc coatings on dual phase steel was investigated by electron microscopy and the coating adhesion characterized by tensile testing. The zinc coating consists of a zinc layer and columnar zeta-FeZn13 particles on top of a thin inhibition layer adjacent to the

  14. Migration using a transversely isotropic medium with symmetry normal to the reflector dip

    KAUST Repository

    Alkhalifah, Tariq Ali


    A transversely isotropic (TI) model in which the tilt is constrained to be normal to the dip (DTI model) allows for simplifications in the imaging and velocity model building efforts as compared to a general TI (TTI) model. Although this model cannot be represented physically in all situations, for example, in the case of conflicting dips, it handles arbitrary reflector orientations under the assumption of symmetry axis normal to the dip. Using this assumption, we obtain efficient downward continuation algorithms compared to the general TTI ones, by utilizing the reflection features of such a model. Phase-shift migration can be easily extended to approximately handle lateral inhomogeneity using, for example, the split-step approach. This is possible because, unlike the general TTI case, the DTI model reduces to VTI for zero dip. These features enable a process in which we can extract velocity information by including tools that expose inaccuracies in the velocity model in the downward continuation process. We test this model on synthetic data corresponding to a general TTI medium and show its resilience. 2011 Tariq Alkhalifah and Paul Sava.

  15. Structural modification and band gap engineering of sol–gel dip ...

    Indian Academy of Sciences (India)

    In the present study, we investigated the effect of vacuum annealing on the structural and optical properties of sol–gel dip-coated thin films of Zn 0.75 Mg 0.25 O alloy. XRD studies revealed that all these films werepolycrystalline with hexagonal wurtzite structure and there was no trace of additional phases other than ZnO.

  16. Dip-Coating Process Engineering and Performance Optimization for Three-State Electrochromic Devices (United States)

    Wu, Lu; Yang, Dejiang; Fei, Lixun; Huang, Yue; Wu, Fang; Sun, Yiling; Shi, Jiayuan; Xiang, Yong


    Titanium dioxide (TiO2) nanoparticles were modified onto fluorine-doped tin oxide (FTO) via dip-coating technique with different nanoparticle sizes, lifting speeds, precursor concentrations, and dipping numbers. Electrodeposition-based electrochromic device with reversible three-state optical transformation (transparent, mirror, and black) was fabricated subsequently by sandwiching a suitable amount of gel electrolyte between modified FTO electrode and flat FTO electrode. Correlation between dip-coating process engineering, morphological features of TiO2 thin films, i.e., thickness and roughness, as well as performance of electrochromic devices, i.e., optical contrast, switching time, and cycling stability, were investigated. The modified device exhibits high optical contrast of 57%, the short coloration/bleaching switching time of 6 and 20 s, and excellent cycling stability after 1500 cycles of only 27% decrement rate by adjusting dip-coating processes engineering. The results in this study will provide valuable guidance for rational design of the electrochromic device with satisfactory performance.

  17. High silicon steel production through hot-dipping in Al-Si-alloy and diffusion annealing

    International Nuclear Information System (INIS)

    Ros-Yanez, T.; Houbaert, Y.; Schneeweis, O.; Asensio-Lozano, J.; Prado-Garcia, M.


    It is difficult to process steel sheet with a high Si content (>3,5%Si), mainly because of its brittleness and the appearance of cracks during rolling and oxidation. However, there is a market for this steel in electrical applications because of the favourable influence of Si on magnetostriction and electrical resistivity. As an alternative process, 3% Si-steel substrates were coated with hypereutectic Al-Si-alloys in a hot-dip simulator using different preheating and dipping times. The obtained layers were characterised by SEM and EDS analysis. Diffusion annealing experiments were performed to obtain sufficient amount of Si in the steel. It was observed that: Intermetallic phases appear in the coating layers as according to the ternary Fe-Si-Al diagram. With a double dipping primary silicon crystals are formed in the surface layer. the ordered DO 3 structure is present if the dipping and/or diffusion time is long enough. Homogeneous silicon gradients in the whole substrate thickness have not yet been achieved. Theoretic calculations show that Si-gradient, also have beneficial effects on magnetic behaviour. (Author) 17 refs

  18. Root dipping: a technique to supply P to low land rice

    Energy Technology Data Exchange (ETDEWEB)

    Sreenivasa Raju, A.; Murali Mohan Rao, G.V.; Sathe, A.; Subba Rao, I.V. (Andhra Pradesh Agricultural Univ., Hyderabad (India). Radio Tracer Lab.)


    Employing tracer technique it was found that in a vertisol soil containing medium available P/sub 2/O/sub 5/, dipping the roots of rice seedlings in solutions of 2 percent KH/sub 2/PO/sub 4/ or 1 or 2 percent monoammonium phosphate (MAP) or diammonium phosphate (DAP) increased the grain yields significantly over no P, although the yields were less than 60 kg P/sub 2/O/sub 5//ha applied to soil. Seedling root dip in the slurry made of ammophos (30 kg P/sub 2/O/sub 5//ha) was as good as soil application of 60 kg P/sub 2/O/sub 5//ha. The percent P derived from fertilizer Psub(dff) and P utilization were greater under root dip in 2 percent solutions of MAP or KH/sub 2/PO/sub 4/ compared to soil application of 30 or 60 kg P/sub 2/O/sub 5//ha. In terms of grain yield, Psub(dff) and percent P utilization, root dipping in 2 percent KH/sub 2/PO/sub 4/, 1 or 2 percent MAP was as effective as 30 kg P/sub 2/O/sub 5//ha applied to soil.

  19. Static deformation due to a long buried dip-slip fault in an isotropic ...

    Indian Academy of Sciences (India)

    Closed-form analytical expressions for the displacements and the stresses at any point of a two-phase medium consisting of a homogeneous, isotropic, perfectly elastic half-space in welded contact with a homogeneous, orthotropic, perfectly elastic half-space due to a dip-slip fault of finite width located at an arbitrary ...

  20. Corrosion behaviour of hot dip zinc and zinc–aluminium coatings on ...

    Indian Academy of Sciences (India)

    A comparative investigation of hot dip Zn–25Al alloy, Zn–55Al–Si and Zn coatings on steel was performed with attention to their corrosion performance in seawater. The results of 2-year exposure testing of these at Zhoushan test site are reported here. In tidal and immersion environments, Zn–25Al alloy coating is several ...

  1. Static deformation due to a long buried dip-slip fault in an isotropic

    Indian Academy of Sciences (India)

    Closed-form analytical expressions for the displacements and the stresses at any point of a two-phase medium consisting of a homogeneous, isotropic, perfectly elastic half-space in welded contact with a homogeneous, orthotropic, perfectly elastic half-space due to a dip-slip fault of finite width located at an arbitrary ...

  2. Non-dipping blood pressure patterns and arterial stiffness parameters in patients with Behcet's disease. (United States)

    Celik, Gulperi; Yilmaz, Sema; Ergulu Esmen, Serpil


    Behcet's disease is a multisystemic vasculitis involving veins and arteries of various sizes. Non-dipping status, augmentation index and pulse wave velocity are important determinants of cardiovascular mortality and morbidity. We investigated the non-dipping status and arterial stiffness in patients with Behcet's disease. In this cross-sectional study, we examined the vascular parameters of 96 patients with Behcet's disease (53% female) and 60 age- and sex-matched control subjects. The non-dipping status and arterial distensibility were assessed using a Mobil-O-Graph Arteriograph, an automatic oscillometric device. In total, 65.6% of 96 patients were systolic non-dippers, and 34.4% exhibited high augmentation indices. Ten percent of the control subjects were systolic non-dippers, and 11.7% exhibited high augmentation indices. Nocturnal decreases in systolic blood pressure correlated with central systolic blood pressure and diastolic blood pressure, as well as nocturnal decreases in diastolic blood pressure. Furthermore, non-dipper patients with Behcet's disease exhibited higher nocturnal cardiac outputs than did dipper patients with Behcet's disease. Augmentation index correlated negatively with C-reactive protein and correlated positively with both 24 h and nocturnal peripheral resistance, as well as 24 h pulse wave velocity. The patients with high augmentation indices exhibited lower creatinine clearance, as well as lower nocturnal cardiac outputs, higher 24 h peripheral resistance and higher 24 h pulse wave velocities. Non-dipping status and arterial stiffness may exacerbate the harmful cardiovascular effects of the other. In addition to conventional risk factors, non-dipping status and arterial stiffness should be examined during the follow-up evaluations of patients with Behcet's disease.

  3. Remarkable rates of lightning strike mortality in Malawi.

    Directory of Open Access Journals (Sweden)

    Monique Borgerhoff Mulder

    Full Text Available Livingstone's second mission site on the shore of Lake Malawi suffers very high rates of consequential lightning strikes. Comprehensive interviewing of victims and their relatives in seven Traditional Authorities in Nkhata Bay District, Malawi revealed that the annual rate of consequential strikes was 419/million, more than six times higher than that in other developing countries; the rate of deaths from lightning was 84/million/year, 5.4 times greater than the highest ever recorded. These remarkable figures reveal that lightning constitutes a significant stochastic source of mortality with potential life history consequences, but it should not deflect attention away from the more prominent causes of mortality in this rural area.

  4. Legal questions surrounding hunger strikes by detainees and prisoners. (United States)

    Strauss, S A


    The 'right to die' is not of an absolute character but is subject to definite qualification. There are legal and social interests reflecting profound ethical values which militate against an absolute right on the part of a prisoner to die by means of a hunger strike. The declared policy of the South African authorities is that a prisoner who resorts to a hunger strike may not be subjected to force-feeding. This is in accordance with the 1975 Tokyo Declaration. Unfortunately the Declaration is silent on the question of whether a doctor may provide medical treatment once a hunger striker has reached the point where he is no longer capable of rational thought. In this article it is submitted that a doctor would be legally entitled to do so.

  5. Single Station System and Method of Locating Lightning Strikes (United States)

    Medelius, Pedro J. (Inventor); Starr, Stanley O. (Inventor)


    An embodiment of the present invention uses a single detection system to approximate a location of lightning strikes. This system is triggered by a broadband RF detector and measures a time until the arrival of a leading edge of the thunder acoustic pulse. This time difference is used to determine a slant range R from the detector to the closest approach of the lightning. The azimuth and elevation are determined by an array of acoustic sensors. The leading edge of the thunder waveform is cross-correlated between the various acoustic sensors in the array to determine the difference in time of arrival, AT. A set of AT S is used to determine the direction of arrival, AZ and EL. The three estimated variables (R, AZ, EL) are used to locate a probable point of the lightning strike.


    Directory of Open Access Journals (Sweden)

    Radu-Florin GEAMĂNU


    Full Text Available This study will try to give an overview and assess the international and European standards regarding the management of hunger strikes. We will analyse the international and European standards regarding the force-feeding a prisoner on a hunger strike. The paper will focus on the study of the ECtHR judgements regarding the force-feeding of hunger strikers. Also, we will address the U.S. case and the force-feeding of prisoners which is considered to be, in certain cases, an act of torture based on the international human rights standards. To close with, the study will attempt to go through the recent developments in the Romanian legislation, analysing the legislation and its conformity with the European principles and recommendations, bearing in mind the prohibition, in absolute terms, of torture or inhuman or degrading treatment or punishment.

  7. Control of striking velocity by table tennis players. (United States)

    Marinovic, Welber; Iizuka, Cristina Akiko; Freudenheim, Andrea Michele


    This study investigated how 7 skilled table tennis players controlled velocity of a forehand drive stroke when the ball's trajectory, velocity, and spin were modified. They hit a target in response to balls launched under four different conditions. The relative and absolute times used in the backswing phase showed no significant differences among conditions. When subjects hit fastballs, there was a significant change in the time required for them to reach the peak of velocity in the forward swing phase. In addition, players decreased the velocity of their strokes to hit fast-approaching balls. These results indicate that highly skilled table tennis players need to adjust the striking velocity and striking time (relative and absolute) required to reach the peak of velocity in the forward swing phase for these task modifications. Since they used slower movement velocities to hit faster-approaching balls, skilled table tennis players may override this speed-coupling process.

  8. The potential influence of subduction zone polarity on overriding plate deformation, trench migration and slab dip angle

    NARCIS (Netherlands)

    Schellart, W. P.


    A geodynamic model exists, the westward lithospheric drift model, in which the variety of overriding plate deformation, trench migration and slab dip angles is explained by the polarity of subduction zones. The model predicts overriding plate extension, a fixed trench and a steep slab dip for

  9. 2-D Deformation analysis of a half-space due to a long dip-slip fault at

    Indian Academy of Sciences (India)

    Closed form analytical expressions of stresses and displacements at any field point due to a very long dip-slip fault of finite width buried in a homogeneous, isotropic elastic half-space, are presented. Airy stress function is used to derive the expressions of stresses and displacements which depend on the dip angle and ...

  10. 2-D Deformation analysis of a half-space due to a long dip-slip fault ...

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    Closed form analytical expressions of stresses and displacements at any field point due to a very long dip-slip fault of finite width buried in a homogeneous, isotropic elastic half-space, are presented. Airy stress function is used to derive the expressions of stresses and displacements which depend on the dip angle and ...

  11. Simulating Bird Strike on Aircraft Composite Wing Leading Edge.


    Ericsson, Max


    In this master thesis project the possibility to model the response of a wing when subjected to bird strike using finite elements is analyzed. Since this transient event lasts only a few milliseconds the used solution method is explicit time integration. The wing is manufactured using carbon fiber laminate. Carbon fiber laminates have orthotropic material properties with different stiffness in different directions. Accordingly, there are damage mechanisms not considered when using metal that ...

  12. Striking dynamics and kinetic properties of boxing and MMA gloves

    Directory of Open Access Journals (Sweden)

    Benjamin Lee


    Full Text Available With the growing popularity of Mixed Martial Arts (MMA as a competitive sport, questions regarding the dynamic response and properties of MMA gloves arise. High-energy impacts from punches are very similar to boxing yet MMA competition requires the use of 4 oz fingerless glove, compared to the larger full enclosure boxing glove. This work assessed the kinetic properties and strike dynamics of MMA gloves and compared findings with traditional boxing gloves. Gloves mounted on a molded fist were impacted repetitively on an instrumental anvil designed for impact, over a 5 hour period resulting in 10,000 continuous and consistent strikes. Kinetic data from impacts were sampled at the beginning of the data collection and subsequently every 30 minutes (every 1,000 strikes. MMA gloves produced 4-5 times greater peak force and 5 times faster load rate compared to the boxing glove. However, MMA gloves also showed signs of material fatigue, with peak force increasing by 35% and rate of loading increasing by 60% over the duration of the test. Boxing glove characteristics did deteriorate but to a lesser extent. In summary, the kinetic properties of MMA glove differed substantially from the boxing glove resulting in impacts characterized by higher peak forces and more rapid development of force. Material properties including stiffness and thickness play a role in the kinetic characteristics upon impact, and can be inferred to alter injury mechanisms of blunt force trauma.

  13. Abduction of Toe-excavation Induced Failure Process from LEM and FDM for a Dip Slope with Rock Anchorage in Taiwan (United States)

    Huang, W.-S.; Lin, M.-L.; Liu, H.-C.; Lin, H.-H.


    On April 25, 2010, without rainfall and earthquake triggering a massive landslide (200000 m3) covered a 200m stretch of Taiwan's National Freeway No. 3, killing 4 people, burying three cars and destroying a bridge. The failure mode appears to be a dip-slope type failure occurred on a rock anchorage cut slope. The strike of Tertiary sedimentary strata is northeast-southwest and dip 15˚ toward southeast. Based on the investigations of Taiwan Geotechnical Society, there are three possible factors contributing to the failure mechanism as follow:(1) By toe-excavation during construction in 1998, the daylight of the sliding layer had induced the strength reduction in the sliding layer. It also caused the loadings of anchors increased rapidly and approached to their ultimate capacity; (2) Although the excavated area had stabilized soon with rock anchors and backfills, the weathering and groundwater infiltration caused the strength reduction of overlying rock mass; (3) The possible corrosion and age of the ground anchors deteriorate the loading capacity of rock anchors. Considering the strength of sliding layer had reduced from peak to residual strength which was caused by the disturbance of excavation, the limit equilibrium method (LEM) analysis was utilized in the back analysis at first. The results showed the stability condition of slope approached the critical state (F.S.≈1). The efficiency reduction of rock anchors and strength reduction of overlying stratum (sandstone) had been considered in following analysis. The results showed the unstable condition (F.S. <1). This research also utilized the result of laboratory test, geological strength index(GSI) and finite difference method (FDM, FLAC 5.0) to discuss the failure process with the interaction of disturbance of toe-excavation, weathering of rock mass, groundwater infiltration and efficiency reduction of rock anchors on the stability of slope. The analysis indicated that the incremental load of anchors have

  14. Characterization of solid wastes from two different hot-dip galvanizing processes

    International Nuclear Information System (INIS)

    Delvasto, P.; Casal-Ramos, J. a.; Gonzalez-Jordan, O.; Duran-Rodriguez, N. C.; Dominguez, J. R.; Moncada, P.


    Zinc dust and zinc ash from hot-dip galvanizing industries located in Venezuela were characterized using atomic spectroscopy, scanning electron microscopy, X-Ray diffraction and infrared spectroscopy. Dust was formed during the high-pressure drying process of the galvanized pieces, in a plant that uses a steel kettle to hold the molten zinc. Ash identified as A came from the same plant as the dust, while ash identified as B came from a hot-dip galvanizing plant which use a ceramic lined galvanizing furnace. Dust contained 98 wt % Zn, in metallic form. Both ash samples contained: Zn and ZnO, while Zn 5 (OH) 8 Cl 2 xH 2 O and ZnCl 2 were only found in ash B. Globally, ash ''A'' and ash ''B'' contain 71 and 75 wt % Zn, respectively. (Author)

  15. Mitigation of voltage dip and power system oscillations damping using dual STATCOM for grid connected DFIG

    Directory of Open Access Journals (Sweden)

    D.V.N. Ananth


    Full Text Available During grid fault, transmission lines reach its thermal limit and lose its capability to transfer. If this fault current enters generator terminals, it will lead to dip in stator voltage and consequently produces torque and real power oscillations. This further affects in the form of internal heat in rotor windings and finally damages the generator. A new control strategy is proposed to limit fault current using dual STATCOM, which will damp power oscillations and mitigate the voltage dip due to a severe symmetrical fault. It is achieved by diverting the fault current to the capacitor using the dual-STATCOM controller. It is best suitable to maintain power system stability with uninterrupted power supply, effective power transfer capability and rapid reactive power support and to damp inter-area oscillations. The effectiveness of SG and DFIG due to the transmission line short circuit symmetrical fault was studied.

  16. Filmes de titânio-silício preparados por "spin" e "dip-coating"

    Directory of Open Access Journals (Sweden)

    Nassar Eduardo J.


    Full Text Available The conditions for the preparation of luminescent materials, consisting of Eu3+ ions entrapped in a titanium matrix, in the forma of a thin film, using the sol-gel process, are described. The films were obtained from sols prepared with TEOS and TEOT, in the presence of acetylacetone as the hidrolysis-retarding agent, using the dip-coating and spin-coating techniques. The influence of these techniques on the films based on titanium and silicon are presented. The Eu3+ was used as a luminescent probe. The films have been characterized by luminescence, reflection and transmittance. The thickness of the films could be related to the preparation procedure. Transparent thin films have been prepared by dip-coating technique.

  17. Steep-dip seismic imaging of the shallow San Andreas fault near Parkfield. (United States)

    Hole, J A; Catchings, R D; St Clair, K C; Rymer, M J; Okaya, D A; Carney, B J


    Seismic reflection and refraction images illuminate the San Andreas Fault to a depth of 1 kilometer. The prestack depth-migrated reflection image contains near-vertical reflections aligned with the active fault trace. The fault is vertical in the upper 0.5 kilometer, then dips about 70 degrees to the southwest to at least 1 kilometer subsurface. This dip reconciles the difference between the computed locations of earthquakes and the surface fault trace. The seismic velocity cross section shows strong lateral variations. Relatively low velocity (10 to 30%), high electrical conductivity, and low density indicate a 1-kilometer-wide vertical wedge of porous sediment or fractured rock immediately southwest of the active fault trace.

  18. Integrating dental data in missing persons and unidentified remains investigations: the RESOLVE INITIATIVE and DIP3. (United States)

    Kogon, S; Arnold, J; Wood, R; Merner, L


    DIP3, a computerized aid to assist in dental identification, was integrated into the RESOLVE INITIATIVE, a joint endeavour by the Ontario Provincial Police and the Office of the Chief Coroner for Ontario, to resolve cases of missing persons (MP) and unidentified remains (UNID). Dental data, from the UNID, collected by the coroner and the dental records of MP, provided by investigating police, are streamed separately for input into a dedicated computer program. All dental management is provided by forensic dentists. The advantage of having experienced dentists managing this data is explained. A description of the RESOLVE INITIATIVE and DIP3, including the method used for record transmission is provided. Copyright 2009 Elsevier Ireland Ltd. All rights reserved.

  19. Titanium-silicon films prepared by spin and dip-coating

    International Nuclear Information System (INIS)

    Nassar, Eduardo J.; Ciuffi, Katia J.; Goncalves, Rogeria R.; Messaddeq, Younes; Ribeiro, Sidney J.L.


    The conditions for the preparation of luminescent materials, consisting of Eu 3+ ions entrapped in a titanium matrix, in the form of a thin film, using the sol-gel process, are described. The films were obtained from sols prepared with TEOS and TEOT, in the presence of acetylacetone as the hydrolysis-retarding agent, using the dip-coating and spin-coating techniques. The influence of these techniques on the films based on titanium and silicon are presented. The Eu 3+ was used as a luminescent probe. The films have been characterized by luminescence, reflection and transmittance. The thickness of the films could be related to the preparation procedure. Transparent thin films have been prepared by dip-coating technique. (author)

  20. Control of Polychaetes by Dipping Infected Pearl Oyster on Different Salinity

    Directory of Open Access Journals (Sweden)

    Yani Hadiroseyani


    Full Text Available Dip treatment on pearl oysters (Pinctada maxima was conducted in different concentrations of saline water to eliminate boring polychaetes. Results shows that polychaetes leave the osyters which treated on saline water at 0 ppt, 45 ppt, and 60 ppt as long as 15 minutes each. It also shows that the oysters got high survival rate 7 days after the treatment. Key words : Polychaetes, pearl oyster, dipping, salinity   ABSTRAK Pengendalian polikaeta pengebor dengan menggunakan berbagai konsentrasi larutan garam telah dilakukan pada tiram mutiara (Pinctada maxima. Berdasarkan jumlah polikaeta yang keluar, hasil percobaan ini menunjukkan bahwa perendaman dengan konsentrasi garam 0 ppt. 45 ppt, dan 60 ppt selama 15 menit lebih efektif dibandingkan pada konsentrasi 15 dan 30 ppt. Tingkat kelangsungan hidup tiram mutiara yang diamati 7 hari setelah perendaman dalam larutan garam mencapai 100%. Kata kunci : Polikaeta. tiram mutiara, perendaman. salinitas

  1. Postharvest decay reduction of fig fruit (Ficus carica) by hot water sodium carbonate solutions dip. (United States)

    Molinu, M G; Venditti, T; Dore, A; D'Hallewin, G; Serusi, A; Del Caro, A; Agabbio, M


    Treatments as hot water dips or high temperature conditioning have been proven to be effective to control postharvest decay on various horticultural crops. These treatments reduce chilling injury and rot losses without causing detrimental effects on fruit firmness, flavour, taste or peel appearance. These technologies, aimed to control postharvest pathogens, can be easily matched with the use of "Generally Recognized as Safe" (G.R.A.S.) compounds and employed alternatively to pesticides, known to be harmful to health and environment. In this respect we studied the combined effect of sodium carbonate (SC) and hot water on the storability of black fig fruit cultivar 'Niedda Longa' of Sardinian germplasm. Second crop fig fruit, harvested in the middle of September, was dipped for one minute in water solutions containing 0, 0.05, 0.5, and 1% (w/v) of SC at 25 or 60 degrees C and then stored at 5 degrees C and 90% relative humidity (RH) for two weeks. After one and two weeks of storage decay, weight loss were monitored and visual assessment was scored. Treatments with hot solutions were more effective in controlling decay compared to cold ones and the best results were achieved with 0.5% of SC at 60 degrees C. This combination reduced the decay rate from 26% (control) to 0% after 1 week and from 50% to 14% after two weeks of storage, respectively. Lower or higher SC concentrations applied at 60 degrees C were less effective and, after two weeks of storage, decay percentages were 38 and 43.6%, respectively. Water dip at 60 degrees C did not affect the weight loss as compared to dips at 25 degrees C either after one or two weeks of storage. At the same time, a significant reduction was found only with 1% of SC at 25 degrees C. The fruit treated with 0.5% of SC at 60 degrees C also had the best visual assessment up to two weeks of storage.

  2. Mechanisms of pulse pressure amplification dipping pattern during sleep time: the SAFAR study. (United States)

    Argyris, Antonios A; Nasothimiou, Efthimia; Aissopou, Evaggelia; Papaioannou, Theodoros G; Zhang, Yi; Blacher, Jacques; Safar, Michel E; Sfikakis, Petros P; Protogerou, Athanase D


    The difference in pulse pressure (PP) between peripheral arteries and the aorta, called pulse pressure amplification (PPamp), is a well-described physiological phenomenon independently associated with cardiovascular events. Recent studies suggest that it exhibits circadian variability. Our aim was to detect the factors associated with the circadian variability of PPamp. In 497 consecutive subjects (aged 54 years, 56.7% male, 79.7% hypertensives), we assessed the circadian pattern of peripheral and central arterial hemodynamics by 24-hour evaluation of brachial and aortic blood pressure (BP), augmentation index (AI), and pulse wave velocity (PWV) using a validated oscillometric device (Mobil-O-Graph). All parameters exhibited a circadian variation. Sleep dipping (decrease) pattern was observed for PPamp, brachial and aortic systolic BP, mean BP, and PWV, whereas a rising pattern (higher sleep than wake values) was observed for brachial PP, aortic PP, and AI. The factors independently associated with the less sleep dipping in PPamp were older age, lower height, the use of antihypertensive medication, and sleep decrease in arterial stiffness (PWV), whereas female gender, the presence of hypertension, sleep increase of pressure wave reflections (AI), sleep decrease in heart rate, and mean BP were associated with a greater sleep-dipping in PPamp. These data provide further pathophysiological understanding of the mechanisms leading to PPamp dipping. Several implications regarding the clinical use of the aortic and brachial BP, especially during sleep time, are raised that should be addressed in future research. Copyright © 2017 American Society of Hypertension. Published by Elsevier Inc. All rights reserved.

  3. Ion dip spectroscopy of cold molecules and ions. Progress report and renewal proposal

    Energy Technology Data Exchange (ETDEWEB)

    Wessel, J.


    A research program is underway with the objective of developing techniques of high resolution multiphoton spectroscopy for selective, ultrasensitive molecular detection. Methods under study include various forms of ion dip spectroscopy and new methods of ion fragmentation spectroscopy. The studies are providing a new understanding of the fundamental spectroscopy and photophysics of large molecular ions. Dimer and cluster ions of polynuclear aromatics and related species are also being investigated, with potential detection applications.

  4. Performance of Doubly-Fed Wind Power Generators During Voltage Dips

    DEFF Research Database (Denmark)

    Aparicio, N.; Chen, Zhe; Beltran, H.

    The growing of wind generation in Spain has forced its Transmission System Operator (TSO) to release new requirements that establish the amount of reactive power that a wind turbine has to supply to the grid during a voltage dip. Wind turbines equipped with doubly-fed induction generators (DFIG) ...... acting as STATCOM helps to improve the voltage profile sufficiently to permit rotor-side converter reconnection....

  5. The study of importance sampling in Monte-carlo calculation of blocking dips

    International Nuclear Information System (INIS)

    Pan Zhengying; Zhou Peng


    Angular blocking dips around the axis in Al single crystal of α-particles of about 2 Mev produced at a depth of 0.2 μm are calculated by a Monte-carlo simulation. The influence of the small solid angle emission of particles and the importance sampling in the solid angle emission have been investigated. By means of importance sampling, a more reasonable results with high accuracy are obtained

  6. ?Non-dipping? is equally frequent in narcoleptic patients and in patients with insomnia


    Sieminski, Mariusz; Partinen, Markku


    Narcolepsy with cataplexy (NC) is a neurological sleep disorder characterized by very low or undetectable concentration of hypocretin-1 in the cerebrospinal fluid. It has been recently found that patients with NC have disturbed circadian pattern of blood pressure, with more frequent non-dipping, compared to healthy controls. It has been hypothesized that lack of hypocretin may lead to increase in nocturnal blood pressure. This increase may result also from disturbed sleep architecture regardl...

  7. Numerical modeling of the productivity of vertical to shallowly dipping fractured zones in crystalline rocks (United States)

    Leray, S.; de Dreuzy, J.-R.; Bour, O.; Bresciani, E.


    SummaryGroundwater resources in crystalline rock are typically associated with the weathered zone and regional sub-vertical faults that are well connected to the surface. However, some sub-horizontal and shallowly dipping fractured zones can also be highly-productive aquifers. In this paper, numerical simulations of a conceptual hydrogeological model show that the flow to such strongly transmissive fractured zones is controlled by their transmissivity or by their deepening structure. While leakage through the overlying rock units is generally the limiting factor, recharge always occurs at least close to the outcrop of the fractured zone where the overlying rock is thinner and guarantees the availability of some groundwater. At small dip angles, recharge extends spatially and the flow within the fractured zone may even become the limiting factor when the hydraulic conductivity of the overlying rock is not less than two orders of magnitude smaller than the fractured zone transmissivity. This is precisely the case of the Plœmeur aquifer (Brittany, France) located in a crystalline rock geologic setting, where groundwater in a shallowly dipping fractured zone is used as the source of water supply for a nearby city of 20,000 people. Simulation results show that the fractured zones may represent potential aquifers under a large variety of hydrogeological conditions. Aquifers in shallowly dipping structures differ strongly from those located in regional sub-vertical fault zones in terms of flow patterns, and thus supposedly in terms of management of the groundwater resource. They are more local than regional in scale, and consequently do not require regional fracture connectivity. The leakage through the overlying rock unit enhances water quality. Finally, we argue that the potential widespread occurrence of these alternative and possibly less accessible resources should promote the development of appropriate identification methods.

  8. Electrochemical behaviour of silica basic hybrid coatings deposited on stainless steel by dipping and EPD

    International Nuclear Information System (INIS)

    Castro, Y.; Duran, A.; Damborenea, J.J.; Conde, A.


    The aim of this work is the characterisation of the corrosion behaviour of stainless steel (AISI 304) substrates coated by dipping and electrophoretic deposition (EPD) from a sol-gel basic sol. Particulate silica sols (labelled NaSi) were prepared by basic catalysis from ethyltriethoxysilane (TEOS), methyltriethoxysilane (MTES) and sodium hydroxide. Coatings between 2 and 10 μm were prepared by using concentrated and diluted sols by dipping and EPD process and the corrosion behaviour of the coated substrates were studied through potentiodynamic and impedance spectroscopy measurements (EIS). Potentiodynamic studies of coatings produced by dipping reveal a strong dependence of the protective properties with the concentration of the sol. This behaviour was confirmed by EIS showing that only the coatings obtained from concentrated sol present enough protective properties. On the contrary, EPD coatings prepared from diluted NaSi sol showed an excellent corrosion resistance, maintaining a pure capacitive behaviour for long periods of immersion. EPD deposition is thus proposed as a good alternative method for obtaining thicker and denser coatings with good protective properties from dilute and stable sols

  9. Influence of hot water dip and gamma irradiation on postharvest fungal decay of Galia melons

    International Nuclear Information System (INIS)

    Barkai-Golan, R.; Padova, R.; Ross, I.; Lapidot, M.; Copel, A.; Davidson, H.


    Dipping Galia melons in hot water at 52 deg C for 5 min or at 55 deg for 2 min resulted in 12-15% decay (caused by Alternaria alternata, Fusarium spp. and Trichothecium roseum) during prolonged storage (12 d at 6 deg plus 3 d at 18 deg ) compared with 75% decay in untreated fruit or 60% decay in cold-water-dipped fruit. Irradiation at 0.5 or 1 kGy had no significant effect on decay development. However, combination of heat treatment with a 0.5 kGy dose prevented fungal growth, resulting in 5% decay during storage. Combinations of heating with 1 kGy irradiation gave no improvement in anti-fungal effect over treatment with 0.5 kGy and sometimes resulted in a decreased suppressive effect. Reducing the duration of dipping at 55 deg from 2 to 0.5 min, applied alone or in combination with irradiation, considerably reduced the anti-fungal effect of the treatment. The effective combined treatment resulted in 12-15% of slight peel damage, but all the fruits were regarded as marketable. No differences in fruit firmness were recorded among the treatments

  10. Impact of the Converter Control Strategies on the Drive Train of Wind Turbine during Voltage Dips

    Directory of Open Access Journals (Sweden)

    Fenglin Miao


    Full Text Available The impact of converter control strategies on the drive train of wind turbines during voltage dips is investigated in this paper using a full electromechanical model. Aerodynamics and tower vibration are taken into consideration by means of a simulation program, named FAST. Detailed gearbox and electrical subsystems are represented in MATLAB. The dynamic response of electromagnetic torque and its impact on the mechanical variables are the concern in this paper and the response of electrical variables is less discussed. From the mechanical aspects, the effect of rising power recovery speed and unsymmetrical voltage dips are analyzed on the basis of the dynamic response of the high-speed shaft (HSS. A comparison of the impact on the drive train is made for two converter control strategies during small voltage dips. Through the analysis of torque, speed and tower vibration, the results indicate that both power recovery speed and the sudden torque sag have a significant impact on drive trains, and the effects depend on the different control strategies. Moreover, resonance might be excited on the drive train by an unbalanced voltage.

  11. Effect of soil properties on arsenic fractionation and bioaccessibility in cattle and sheep dipping vat sites. (United States)

    Sarkar, D; Makris, K C; Parra-Noonan, M T; Datta, R


    Historical use of high arsenic (As) concentrations in cattle/sheep dipping vat sites to treat ticks has resulted in severe contamination of soil and groundwater with this Group-A human carcinogen. In the absence of a universally applicable soil As bioaccessibility model, baseline risk assessment studies have traditionally used the extremely conservative estimate of 100% soil As bioaccessibility. Several in-vitro, as well as, in-vivo animal studies suggest that As bioaccessibility in soil can be lower than that in water. Arsenic in soils exists in several geochemical forms with varying degree of dissolution in the human digestive system, and thus, with highly varying As bioaccessibility. Earlier batch incubation studies with As-spiked soils have shown that As bioaccessibility is a function of soil physicochemical properties. We selected 12 dipping vat soils collected from USA and Australia to test the hypothesis that soil properties exert a significant effect on As bioaccessibility in As-contaminated sites. The 12 soils varied widely in terms of soil physico-chemical properties. They were subject to an As sequential fractionation scheme and two in-vitro tests (IVGS and IVGIA) to simulate soil As bioavailability in the human gastrointestinal system. Sequential As fractionation results showed that the majority of the As measured in the dipping vat soils resided either in the Fe/Al hydroxide fraction, or the Ca/Mg fractions, or in the residual fraction. Water-extractable As fraction of the 12 soils was typically vat site soils.

  12. Environmental impact assessment for steeply dipping coal beds: North Knobs site

    Energy Technology Data Exchange (ETDEWEB)


    The US Department of Energy is funding an underground coal gasification (UCG) project in steeply dipping coal beds (SDB), at North Knobs, about 8 miles west of Rawlins, Carbon County, Wyoming. The project is being conducted to determine the technical, economic and environmental viability of such a technology. The development of SDB is an interesting target for UCG since such beds contain coals not normally mineable economically by ordinary techniques. Although the underground gasification of SDB has not been attempted in the US, Soviet experience and theoretical work indicate that the gasification of SDB in place offers all the advantages of underground gasification of horizontal coal seams plus some unique characteristics. The steep angle of dip helps to channel the produced gases up dip to offtake holes and permits the ash and rubble to fall away from the reaction zone helping to mitigate the blocking of the reaction zone in swelling coals. The intersection of SDB with the surface makes the seam accessible for drilling and other preparation. The tests at the North Knobs site will consist of three tests, lasting 20, 80 and 80 days, respectively. A total of 9590 tons of coal is expected to be gasified, with surface facilities utilizing 15 acres of the total section of land. The environmental effects of the experiment are expected to be very small. The key environmental impact is potential groundwater contamination by reaction products from coal gasification. There is good evidence that the surrounding coal effectively blocks the migration of these contaminants.

  13. Viscous dipping, application to the capture of fluids in living organisms (United States)

    Lechantre, Amandine; Michez, Denis; Damman, Pascal

    Some insects, birds and mammals use flower nectar as their energy resources. For this purpose, they developed specific skills to ingest viscous fluids. Depending on the sugar content, i.e., the viscosity, different strategies are observed in vivo. Indeed, butterflies use simple suction for low viscosity nectars; hummingbirds have a tongue made from two thin flexible sheets that bend to form a tube when immersed in a fluid; other animals exhibit in contrast complex papillary structures. We focus on this last method generally used for very viscous nectars. More specifically, bees and bats possess a tongue decorated with microstructures that, according to biologists, would be optimized for fluid capture by viscous dipping. In this talk, we will discuss this assumption by comparing physical models of viscous dipping to in vivo measurements. To mimic the tongue morphology, we used various rod shapes obtained by 3D printing. The influence of the type and size of lateral microstructures was then investigated and used to build a global framework describing viscous dipping for structured rods/tongues.

  14. Along-Strike Differences of the Main Himalayan Thrust and Deformation within the Indian Crust: Insights from Seismicity and Seismic Velocities in Bhutan and its Foreland (United States)

    Diehl, T.; Singer, J.; Hetényi, G.; Kissling, E. H.; Clinton, J. F.


    The seismicity of Bhutan is characterized by the apparent lack of great earthquakes and a significantly lower activity compared to most other parts of the Himalayan arc. To better understand the underlying mechanisms of this anomalously low activity and to relate it with possible along-strike differences in the structure of the orogenic belt, a temporary network with up to 38 broadband seismometers was installed in Bhutan between January 2013 and November 2014. In this work we present a catalog of local and regional earthquakes detected and located with the GANSSER network complemented by regional stations in India, Bangladesh, and China. State-of-the-art data analysis and earthquake location procedures were applied to derive a high-precision earthquake catalog of Bhutan and surrounding regions. Focal mechanisms from regional moment tensor inversions and first-motion polarities complement the earthquake catalog. In the vicinity of the Shumar-Kuru Chu Spur in East Bhutan, seismicity forms a moderately dipping structure at about 12 km depth, which we associate with the Main Himalayan Thrust (MHT). North of 27.6°N the dip of the structure steepens, which can be interpreted as a ramp along the MHT. In West Bhutan seismicity occurs at depths of 20 to 40 km and receiver function images indicate that seismicity occurs in the underthrusting Indian crust rather than on the MHT. The highest seismic activity is clustered along the Goalpara Lineament, a dextral NE-SW striking shear zone in southwest Bhutan, which appears to connect to the western edge of the Shillong Plateau in the foreland. Focal depths indicate that this shear zone is located at depths of 20-30 km and therefore in the underthrusting Indian crust. Preliminary results of a 3D local earthquake tomography show substantial differences in the uppermost crust between east and west Bhutan. Consistent with our receiver function images, the results also indicate a thinning of the crustal root towards eastern Bhutan.

  15. The Association of Pediatric Obesity With Nocturnal Non-Dipping on 24-Hour Ambulatory Blood Pressure Monitoring. (United States)

    Macumber, Ian R; Weiss, Noel S; Halbach, Susan M; Hanevold, Coral D; Flynn, Joseph T


    Obesity has been linked with abnormal nocturnal dipping of blood pressure (BP) in adults, which in turn is associated with poor cardiovascular outcomes. There are few data regarding abnormal dipping status in the obese pediatric population. The goal of this study was to further describe the relationship between obesity and non-dipping status on ambulatory blood pressure monitor (ABPM) in children. We conducted a cross-sectional study using a database of patients aged 5-21 years who had undergone 24-hour ABPM at Seattle Children's Hospital from January 2008 through May 2014. Subjects were grouped by body mass index (BMI) into lean (BMI 15th-85th percentile) and obese (BMI >95th percentile) groups. Compared to lean subjects (n = 161), obese subjects (n = 247) had a prevalence ratio (PR) for non-dipping of 2.15, adjusted for race (95% confidence interval (CI) = 1.25-3.42). Increasing severity of obesity was not further associated with nocturnal non-dipping. Nocturnal non-dipping was not associated with left ventricular hypertrophy (PR = 1.01, 95% CI = 0.71-1.44). These results suggest that in children, just as in adults, obesity is related to a relatively decreased dipping in nocturnal BP. © American Journal of Hypertension, Ltd 2015. All rights reserved. For Permissions, please email:

  16. Ethnic differences in the effects of the DASH diet on nocturnal blood pressure dipping in individuals with high blood pressure. (United States)

    Prather, Aric A; Blumenthal, James A; Hinderliter, Alan L; Sherwood, Andrew


    Ethnic differences in nocturnal blood pressure (BP) dipping may contribute to the increased risk for adverse cardiovascular events noted in African Americans (AAs). The DASH (Dietary Approaches to Stop Hypertension) diet has been shown to be efficacious in lowering clinic and ambulatory BP; however, the effect of the DASH diet on BP dipping is unclear. One hundred and eighteen men and women with high clinic BP (systolic BP (SBP) 130-159; diastolic BP 85-99) and above ideal body weight were randomized to a DASH diet intervention or to a usual diet control (UC) condition. Measures of 24-h ambulatory BP were obtained at baseline and at the end of the 4-month intervention period. At baseline, AAs (n = 43) displayed blunted nocturnal SBP dipping compared to Caucasians (CAs; n = 75) and were more likely to be categorized as nondippers (DASH diet intervention showed a significant improvement in SBP dipping postintervention compared to AAs in the UC condition (P = 0.04), whereas there was no appreciable change in SBP dipping in CAs (P = 0.72). Following the intervention, ethnic differences in SBP dipping were no longer statistically significant (nondipper status: AAs: 44% vs. CAs: 32%; P = 0.19). Our study provides preliminary evidence suggesting that in overweight men and women with high BP, AAs may be especially likely to benefit from augmented SBP dipping associated with consumption of the DASH diet.

  17. PSpice Model of Lightning Strike to a Steel Reinforced Structure

    International Nuclear Information System (INIS)

    Koone, Neil; Condren, Brian


    Surges and arcs from lightning can pose hazards to personnel and sensitive equipment, and processes. Steel reinforcement in structures can act as a Faraday cage mitigating lightning effects. Knowing a structure's response to a lightning strike allows hazards associated with lightning to be analyzed. A model of lightning's response in a steel reinforced structure has been developed using PSpice (a commercial circuit simulation). Segments of rebar are modeled as inductors and resistors in series. A program has been written to take architectural information of a steel reinforced structure and 'build' a circuit network that is analogous to the network of reinforcement in a facility. A severe current waveform (simulating a 99th percentile lightning strike), modeled as a current source, is introduced in the circuit network, and potential differences within the structure are determined using PSpice. A visual three-dimensional model of the facility displays the voltage distribution across the structure using color to indicate the potential difference relative to the floor. Clear air arcing distances can be calculated from the voltage distribution using a conservative value for the dielectric breakdown strength of air. Potential validation tests for the model will be presented

  18. Recent geodynamics of major strike-slip zones

    Directory of Open Access Journals (Sweden)

    Vladimir G. Trifonov


    In all of the cases mentioned above, strike-slip deformation was expressed only or mainly during strong earthquakes. At other times, the rate of its accumulation was small and the dominant stress conditions led to transverse shortening, rarely resulting in local lengthening of the tectonic zone. These variations are caused by the tectonic peculiarities of these zones. The sinistral component of the deformation is related to the shift of the Arabian Plate relative to the African one, but also the transverse component is related to the continental slope and is expressed by the Coastal range shortening that exists in the El Ghab segment zone. There is not only a dextral deformation component, but also a transverse component, expressed by shortening of the Fergana and Talas ranges existing in the Talas-Fergana fault zone. In both zones, the shortening component became appreciable or dominant when the strike-slip deformation rate decreased. Similar, but more local, relationships were expressed in the epicentral area of the 2003 Altai earthquake and in the Western Palmyrides.

  19. Onset of aseismic creep on major strike-slip faults

    KAUST Repository

    Çakir, Ziyadin


    Time series analysis of spaceborne synthetic aperture radar (SAR) data, GPS measurements, and fi eld observations reveal that the central section of the Izmit (Turkey) fault that slipped with a supershear rupture velocity in the A.D. 1999, Mw7.4, Izmit earthquake began creeping aseismically following the earthquake. Rapid initial postseismic afterslip decayed logarithmically with time and appears to have reached a steady rate comparable to the preearthquake full fault-crossing rate, suggesting that it may continue for decades and possibly until late in the earthquake cycle. If confi rmed by future monitoring, these observations identify postseismic afterslip as a mechanism for initiating creep behavior along strike-slip faults. Long-term afterslip and/or creep has signifi cant implications for earthquake cycle models, recurrence intervals of large earthquakes, and accordingly, seismic hazard estimation along mature strike-slip faults, in particular for Istanbul which is believed to lie adjacent to a seismic gap along the North Anatolian fault in the Sea of Marmara. © 2012 Geological Society of America.

  20. Influence of strike object grounding on close lightning electric fields (United States)

    Baba, Yoshihiro; Rakov, Vladimir A.


    Using the finite difference time domain (FDTD) method, we have calculated vertical electric field Ez, horizontal (radial) electric field Eh, and azimuthal magnetic field Hϕ produced on the ground surface by lightning strikes to 160-m- and a 553-m-high conical strike objects representing the Peissenberg tower (Germany) and the CN Tower (Canada), respectively. The fields were computed for a typical subsequent stroke at distances d' from the bottom of the object ranging from 5 to 100 m for the 160-m tower and from 10 to 300 m for the 553-m tower. Grounding of the 160-m object was assumed to be accomplished by its underground basement represented by a 10-m-radius and 8-m-long perfectly conducting cylinder with or without a reference ground plane located 2 m below. The reference ground plane simulates, to some extent, a higher-conducting ground layer that is expected to exist below the water table. The configuration without reference ground plane actually means that this plane is present, but is located at an infinitely large depth. Grounding of the 553-m object was modeled in a similar manner but in the absence of reference ground plane only. In all cases considered, waveforms of Eh and Hϕ are not much influenced by the presence of strike object, while waveforms of Ez are. Waveforms of Ez are essentially unipolar (as they are in the absence of strike object) when the ground conductivity σ is 10 mS/m (the equivalent transient grounding impedance is several ohms) or greater. Thus, for the CN Tower, for which σ ≥ 10 mS/m, the occurrence of Ez polarity change is highly unlikely. For the 160-m tower and for σ = 1 and 0.1 mS/m, waveforms of Ez become bipolar (exhibit polarity change) at d' ≤ 10 m and d' ≤ 50 m, respectively, regardless of the presence of the reference ground plane. The corresponding equivalent transient grounding impedances are about 30 and 50 Ω in the absence of the reference ground plane and smaller than 10 Ω in the presence of the reference

  1. 40 CFR 428.100 - Applicability; description of the latex-dipped, latex-extruded, and latex-molded rubber subcategory. (United States)


    ... latex-dipped, latex-extruded, and latex-molded rubber subcategory. 428.100 Section 428.100 Protection of... POINT SOURCE CATEGORY Latex-Dipped, Latex-Extruded, and Latex-Molded Rubber Subcategory § 428.100 Applicability; description of the latex-dipped, latex-extruded, and latex-molded rubber subcategory. The...

  2. The Diffusion of Strikes: A Dyadic Analysis of Economic Sectors in the Netherlands, 1995–2007

    NARCIS (Netherlands)

    Jansen, Giedo; Sluiter, Roderick; Akkerman, Agnes


    This study examines the extent to which strikes diffuse across sectors and to what extent this diffusion of strikes can be explained by similarities and interdependencies between sectors. For this purpose, the authors examine a unique temporally disaggregated and dyadic database on strikes in Dutch

  3. The Right to Strike in Public Employment. Key Issues Series--No. 15. Second Edition, Revised. (United States)

    Sterret, Grace; Aboud, Antone

    Since the 1960s, the number of strikes by public employees, especially local government employees, has increased, and the number of employees belonging to unions or associations has about tripled. Recently, attention has been focused on strikes by public employees as a result of the strike in 1981 by air traffic controllers and their subsequent…

  4. Strikes in France and the Netherlands; A Comparison of Labour Market Institutions

    NARCIS (Netherlands)

    Butter, den F.A.G.; Koppes, S.Y.


    Strikes as a consequence of labour conflicts occur about 28 times as much in France as in the Netherlands. This paper examines the institutional differences underlying these differences in strike activity. Our empirical analysis shows that strike activity is high in France if workers were successful

  5. The effect of stratigraphic dip on brine inflow and gas migration at the Waste Isolation Pilot Plant

    International Nuclear Information System (INIS)

    Webb, S.W.; Larson, K.W.


    The natural dip of the Salado Formation at the Waste Isolation Pilot Plant (WIPP), although regionally only about 111, has the potential to affect brine inflow and gas-migration distances due to buoyancy forces. Current models, including those in WIPP Performance Assessment calculations, assume a perfectly horizontal repository and stratigraphy. With the addition of buoyancy forces due to the dip, brine and gas flow patterns can be affected. Brine inflow may increase due to countercurrent flow, and gas may preferentially migrate up dip. This scoping study has used analytical and numerical modeling to evaluate the impact of the dip on brine inflow and gas-migration distances at the WIPP in one, two, and three dimensions. Sensitivities to interbed permeabilities, two-phase curves, gas-generation rates, and interbed fracturing were studied

  6. Evaluating the effects of post dip-treatment laser marking on resistance to feeding by subterranean termites (United States)

    Rachel A. Arango; Bessie Woodward; Stan Lebow


    Dip-treatment of wood packing materials is often used instead of pressure treatment mainly because of issues relating to simplicity and cost. Packaging boxes fabricated for the United States Army are required to be dip-treated for at least one minute in an approved preservative solution prior to use. These boxes are expected to have a service life of up to 20 years in...

  7. 2-D deformation of two welded half-spaces due to a blind dip-slip fault

    Indian Academy of Sciences (India)

    The solution of two-dimensional problem of an interface breaking long inclined dip-slip fault in two welded half-spaces is well known.The purpose of this note is to obtain the corresponding solution for a blind fault.The solution is valid for arbitrary values of the fault-depth and the dip angle.Graphs showing the variation of the ...

  8. Growth and characterization of magnetite-maghemite thin films by the dip coating method

    Energy Technology Data Exchange (ETDEWEB)

    Velásquez, A. A., E-mail:; Arnedo, A. [Universidad EAFIT, Grupo de Electromagnetismo Aplicado (Colombia)


    We present the process of growth and characterization of magnetite-maghemite thin films obtained by the dip coating method. The thin films were deposited on glass substrates, using a ferrofluid of nanostructured magnetite-maghemite particles as precursor solution. During the growth of the films the following parameters were controlled: number of dips of the substrates, dip velocity of the substrates and drying times. The films were characterized by Atomic Force Microscopy, Scanning Elelectron Microscopy, four-point method for resistance measurement, Room Temperature Mössbauer Spectroscopy and Hall effect. Mössbauer measurements showed the presence of a sextet attributed to maghemite (γ-Fe{sub 2}O{sub 3}) and two doublets attributed to superparamagnetic magnetite (Fe{sub 3}O{sub 4}), indicating a distribution of oxidation states of the iron as well as a particle size distribution of the magnetic phases in the films. Atomic force microscopy measurements showed that the films cover quasi uniformly the substrates, existing in them some pores with sub-micron size. Scanning Electron Microscopy measurements showed a uniform structure in the films, with spherical particles with size around 10 nm. Voltage versus current measurements showed an ohmic response of the films for currents between 0 and 100 nA. On the other hand, Hall effect measurements showed a nonlinear response of the Hall voltage with the magnetic flux density applied perpendicular to the plane of the films, however the response is fairly linear for magnetic flux densities between 0.15 and 0.35 T approximately. The results suggest that the films are promising for application as magnetic flux density sensors.

  9. Morphology control in thin films of PS:PLA homopolymer blends by dip-coating deposition

    Energy Technology Data Exchange (ETDEWEB)

    Vital, Alexane [Interfaces, Confinement, Matériaux et Nanostructures (ICMN), CNRS-Université d’Orléans, UMR 7374, 1B Rue de la Férollerie, C.S. 40059, 45071 Orléans Cedex 2 (France); Groupe de recherches sur l’énergétique des milieux ionisés (GREMI), CNRS-Université d’Orléans, UMR 7344, 14 rue d' Issoudun, B.P. 6744, F45067 Orléans Cedex 2 (France); Vayer, Marylène [Interfaces, Confinement, Matériaux et Nanostructures (ICMN), CNRS-Université d’Orléans, UMR 7374, 1B Rue de la Férollerie, C.S. 40059, 45071 Orléans Cedex 2 (France); Tillocher, Thomas; Dussart, Rémi [Groupe de recherches sur l’énergétique des milieux ionisés (GREMI), CNRS-Université d’Orléans, UMR 7344, 14 rue d' Issoudun, B.P. 6744, F45067 Orléans Cedex 2 (France); Boufnichel, Mohamed [STMicroelectronics, 16, rue Pierre et Marie Curie, B.P. 7155, 37071 Tours Cedex 2 (France); and others


    Highlights: • A process to control the morphology of polymer blends thin film is described. • It is based on the use of dip-coating at various withdrawal speeds. • The process is examined within the capillary and the draining regimes. • The final dried morphology is controlled by the regime of deposition. • This study is of high interest for the preparation of advanced functional surfaces. - Abstract: In this work, smooth polymer films of PS, PLA and their blends, with thicknesses ranging from 20 nm up to 400 nm and very few defects on the surface were obtained by dip-coating. In contrast to the process of spin-coating which is conventionally used to prepare thin films of polymer blends, we showed that depending on the deposition parameters (withdrawal speed and geometry of the reservoir), various morphologies such as layered films and laterally phase-separated domains could be formed for a given blend/solvent pair, offering much more opportunities compared to the spin-coating process. This diversity of morphologies was explained by considering the superposition of different phenomena such as phase separation process, dewetting and vitrification in which parameters such as the drying time, the compatibility of the polymer/solvent pairs and the affinity of the polymer towards the interfaces were suspected to play a significant role. For that purpose, the process of dip-coating was examined within the capillary and the draining regimes (for low and high withdrawal speed respectively) in order to get a full description of the thickness variation and evaporation rate as a function of the deposition parameters.

  10. Morphology control in thin films of PS:PLA homopolymer blends by dip-coating deposition

    International Nuclear Information System (INIS)

    Vital, Alexane; Vayer, Marylène; Tillocher, Thomas; Dussart, Rémi; Boufnichel, Mohamed


    Highlights: • A process to control the morphology of polymer blends thin film is described. • It is based on the use of dip-coating at various withdrawal speeds. • The process is examined within the capillary and the draining regimes. • The final dried morphology is controlled by the regime of deposition. • This study is of high interest for the preparation of advanced functional surfaces. - Abstract: In this work, smooth polymer films of PS, PLA and their blends, with thicknesses ranging from 20 nm up to 400 nm and very few defects on the surface were obtained by dip-coating. In contrast to the process of spin-coating which is conventionally used to prepare thin films of polymer blends, we showed that depending on the deposition parameters (withdrawal speed and geometry of the reservoir), various morphologies such as layered films and laterally phase-separated domains could be formed for a given blend/solvent pair, offering much more opportunities compared to the spin-coating process. This diversity of morphologies was explained by considering the superposition of different phenomena such as phase separation process, dewetting and vitrification in which parameters such as the drying time, the compatibility of the polymer/solvent pairs and the affinity of the polymer towards the interfaces were suspected to play a significant role. For that purpose, the process of dip-coating was examined within the capillary and the draining regimes (for low and high withdrawal speed respectively) in order to get a full description of the thickness variation and evaporation rate as a function of the deposition parameters.

  11. Assessment of Optimum Value for Dip Angle and Locking Rate Parameters in Makran Subduction Zone (United States)

    Safari, A.; Abolghasem, A. M.; Abedini, N.; Mousavi, Z.


    Makran subduction zone is one of the convergent areas that have been studied by spatial geodesy. Makran zone is located in the South Eastern of Iran and South of Pakistan forming the part of Eurasian-Arabian plate's border where oceanic crust in the Arabian plate (or in Oman Sea) subducts under the Eurasian plate ( Farhoudi and Karig, 1977). Due to lack of historical and modern tools in the area, a sampling of sparse measurements of the permanent GPS stations and temporary stations (campaign) has been conducted in the past decade. Makran subduction zone from different perspectives has unusual behaviour: For example, the Eastern and Western parts of the region have very different seismicity and also dip angle of subducted plate is in about 2 to 8 degrees that this value due to the dip angle in other subduction zone is very low. In this study, we want to find the best possible value for parameters that differs Makran subduction zone from other subduction zones. Rigid block modelling method was used to determine these parameters. From the velocity vectors calculated from GPS observations in this area, block model is formed. These observations are obtained from GPS stations that a number of them are located in South Eastern Iran and South Western Pakistan and a station located in North Eastern Oman. According to previous studies in which the locking depth of Makran subduction zone is 38km (Frohling, 2016), in the preparation of this model, parameter value of at least 38 km is considered. With this function, the amount of 2 degree value is the best value for dip angle but for the locking rate there is not any specified amount. Because the proposed model is not sensitive to this parameter. So we can not expect big earthquakes in West of Makran or a low seismicity activity in there but the proposed model definitely shows the Makran subduction layer is locked.

  12. Rupture Dynamics along Thrust Dipping Fault: Inertia Effects due to Free Surface Wave Interactions (United States)

    Vilotte, J. P.; Scala, A.; Festa, G.


    We numerically investigate the dynamic interaction between free surface and up-dip, in-plane rupture propagation along thrust faults, under linear slip-weakening friction. With reference to shallow along-dip rupture propagation during large subduction earthquakes, we consider here low dip-angle fault configurations with fixed strength excess and depth-increasing initial stress. In this configuration, the rupture undergoes a break of symmetry with slip-induced normal stress perturbations triggered by the interaction with reflected waves from the free surface. We found that both body-waves - behind the crack front - and surface waves - at the crack front - can trigger inertial effects. When waves interact with the rupture before this latter reaches its asymptotic speed, the rupture can accelerate toward the asymptotic speed faster than in the unbounded symmetric case, as a result of these inertial effects. Moreover, wave interaction at the crack front also affects the slip rate generating large ground motion on the hanging wall. Imposing the same initial normal stress, frictional strength and stress drop while varying the static friction coefficient we found that the break of symmetry makes the rupture dynamics dependent on the absolute value of friction. The higher the friction the stronger the inertial effect both in terms of rupture acceleration and slip amount. When the contact condition allows the fault interface to open close to the free surface, the length of the opening zone is shown to depend on the propagation length, the initial normal stress and the static friction coefficient. These new results are shown to agree with analytical results of rupture propagation in bounded media, and open new perspectives for understanding the shallow rupture of large subduction earthquakes and tsunami sources.

  13. Electrical Characterizations of Lightning Strike Protection Techniques for Composite Materials (United States)

    Szatkowski, George N.; Nguyen, Truong X.; Koppen, Sandra V.; Ely, Jay J.; Mielnik, John J.


    The growing application of composite materials in commercial aircraft manufacturing has significantly increased the risk of aircraft damage from lightning strikes. Composite aircraft designs require new mitigation strategies and engineering practices to maintain the same level of safety and protection as achieved by conductive aluminum skinned aircraft. Researchers working under the NASA Aviation Safety Program s Integrated Vehicle Health Management (IVHM) Project are investigating lightning damage on composite materials to support the development of new mitigation, diagnosis & prognosis techniques to overcome the increased challenges associated with lightning protection on composite aircraft. This paper provides an overview of the electrical characterizations being performed to support IVHM lightning damage diagnosis research on composite materials at the NASA Langley Research Center.

  14. A Probabilistic, Facility-Centric Approach to Lightning Strike Location (United States)

    Huddleston, Lisa L.; Roeder, William p.; Merceret, Francis J.


    A new probabilistic facility-centric approach to lightning strike location has been developed. This process uses the bivariate Gaussian distribution of probability density provided by the current lightning location error ellipse for the most likely location of a lightning stroke and integrates it to determine the probability that the stroke is inside any specified radius of any location, even if that location is not centered on or even with the location error ellipse. This technique is adapted from a method of calculating the probability of debris collisionith spacecraft. Such a technique is important in spaceport processing activities because it allows engineers to quantify the risk of induced current damage to critical electronics due to nearby lightning strokes. This technique was tested extensively and is now in use by space launch organizations at Kennedy Space Center and Cape Canaveral Air Force Station. Future applications could include forensic meteorology.

  15. Migraine strikes as neuronal excitability reaches a tipping point.

    Directory of Open Access Journals (Sweden)

    Marten Scheffer

    Full Text Available Self-propagating waves of cerebral neuronal firing, known as spreading depolarisations, are believed to be at the roots of migraine attacks. We propose that the start of spreading depolarisations corresponds to a critical transition that occurs when dynamic brain networks approach a tipping point. We show that this hypothesis is consistent with current pathogenetic insights and observed dynamics. Our view implies that migraine strikes when modulating factors further raise the neuronal excitability in genetically predisposed subjects to a level where even minor perturbations can trigger spreading depolarisations. A corollary is that recently discovered generic early warning indicators for critical transitions may be used to predict the onset of migraine attacks even before patients are clinically aware. This opens up new avenues for dissecting the mechanisms for the onset of migraine attacks and for identifying novel prophylactic treatment targets for the prevention of attacks.

  16. Precision Strike Training in Lean Manufacturing: A Workplace Literacy Guidebook [and] Final Report on Precision Strike Workplace Literacy Training at CertainTeed Corporation. (United States)

    National Alliance of Business, Inc., Washington, DC.

    CertainTeed's Precision Strike training program was designed to close the gaps between the current status of its workplace and where that work force needed to be to compete successfully in global markets. Precision Strike included Skills and Knowledge in Lifelong Learning (SKILL) customized, computerized lessons in basic skills, one-on-one…

  17. Development of radiation sterilized dip slides for enumerating lactic acid bacteria and total count in foodstuffs (United States)

    Eisenberg, E.; Padova, R.; Kirsch, E.; Weissman, Sh.; Hirshfeld, T.; Shenfeld, A.

    APT agar (APT) used for enumeration of lactic acid bacteria and Plate Count agar (PCA) applied for total count were sterilized by gamma radiation using radiation dose of 10-15 kGy. Radiosterilized PCA and APT modified by adding catalase prior to irradiation, or APT with increased content of yeast extract performed, as well as, the heat sterilized commercial media. Growth performance was evaluated on several strains of microorganisms, as well as, by enumeration of bacteria in food products. Radiosterilization of culture media in final packaging, can be applied to produce dip slide kits containing PCA or APT.

  18. Development of radiation sterilized dip slides for enumerating lactic acid bacteria and total count in foodstuffs

    Energy Technology Data Exchange (ETDEWEB)

    Eisenberg, E.; Padova, R.; Kirsch, E.; Weissman, Sh.; Hirshfeld, T.; Shenfeld, A.


    APT agar (APT) used for enumeration of lactic acid bacteria and Plate Count agar (PCA) applied for total count were sterilized by gamma radiation using radiation dose of 10-15 kGy. Radiosterilized PCA and APT modified by adding catalase prior to irradiation, or APT with increased content of yeast extract performed, as well as, the heat sterilized commercial media. Growth performance was evaluated on several strains of microorganisms, as well as, by enumeration of bacteria in food products. Radiosterilization of culture media in final packaging, can be applied to produce dip slide kits containing PCA or APT.

  19. Genome-wide DNA methylation profiling with MeDIP-seq using archived dried blood spots

    DEFF Research Database (Denmark)

    Staunstrup, Nicklas H; Starnawska, Anna; Nyegaard, Mette


    biobanks. However, availability of this biological material is highly limited as each DBS is made only from a few droplets of blood and storage conditions may be suboptimal for epigenetic studies. Furthermore, as relevant markers may reside outside gene bodies, epigenome-wide interrogation is needed....... RESULTS: Here we demonstrate, as a proof of principle, that genome-wide interrogation of the methylome based on methylated DNA immunoprecipitation coupled with next-generation sequencing (MeDIP-seq) is feasible using a single 3.2 mm DBS punch (60 ng DNA) from filter cards archived for up to 16 years...

  20. Heat-pump performance: voltage dip/sag, under-voltage and over-voltage

    Directory of Open Access Journals (Sweden)

    William J.B. Heffernan


    Full Text Available Reverse cycle air-source heat-pumps are an increasingly significant load in New Zealand and in many other countries. This has raised concern over the impact wide-spread use of heat-pumps may have on the grid. The characteristics of the loads connected to the power system are changing because of heat-pumps. Their performance during under-voltage events such as voltage dips has the potential to compound the event and possibly cause voltage collapse. In this study, results from testing six heat-pumps are presented to assess their performance at various voltages and hence their impact on voltage stability.

  1. On thermal vibration effects in diffusion model calculations of blocking dips

    International Nuclear Information System (INIS)

    Fuschini, E.; Ugozzoni, A.


    In the framework of the diffusion model, a method for calculating blocking dips is suggested that takes into account thermal vibrations of the crystal lattice. Results of calculations of the diffusion factor and the transverse energy distribution taking into accoUnt scattering of the channeled particles at thermal vibrations of lattice nuclei, are presented. Calculations are performed for α-particles with the energy of 2.12 MeV at 300 K scattered by Al crystal. It is shown that calculations performed according to the above method prove the necessity of taking into account effects of multiple scattering under blocking conditions

  2. L'elaboració del complex d'Èdip en nens adoptats: dols i vincles


    Ballús Barnils, Elisabeth


    La nostra investigació empírica s'emmarca, a nivell teòric, dins la teoria relacional pròpia de la psicoanàlisi.Objectius: l'objectiu principal d'aquesta tesi és conèixer com els nens adoptats elaboren el complex d'Èdip, tenint en compte que a tots ells els acompanyen dues variables indissociables d'aquesta condició d'ésser un nen adoptat:- Ser un nen abandonat pels pares biològics. - Tenir una doble parentalitat: pares biològics i pares adoptius. Amb aquesta recerca volem aprofundir -mitja...


    Directory of Open Access Journals (Sweden)

    Cynthia A. Bir


    Full Text Available Almost all cultures have roots in some sort of self defence system and yet there is relatively little research in this area, outside of a sports related environment. This project investigated different applications of strikes from Kung Fu practitioners that have not been addressed before in the literature. Punch and palm strikes were directly compared from different heights and distances, with the use of a load cell, accelerometers, and high speed video. The data indicated that the arm accelerations of both strikes were similar, although the force and resulting acceleration of the target were significantly greater for the palm strikes. Additionally, the relative height at which the strike was delivered was also investigated. The overall conclusion is that the palm strike is a more effective strike for transferring force to an object. It can also be concluded that an attack to the chest would be ideal for maximizing impact force and moving an opponent off balance

  4. Growth and linkage of the quaternary Ubrique Normal Fault Zone, Western Gibraltar Arc: role on the along-strike relief segmentation (United States)

    Jiménez-Bonilla, Alejandro; Balanya, Juan Carlos; Exposito, Inmaculada; Diaz-Azpiroz, Manuel; Barcos, Leticia


    Strain partitioning modes within migrating orogenic arcs may result in arc-parallel stretching that produces along-strike structural and topographic discontinuities. In the Western Gibraltar Arc, arc-parallel stretching has operated from the Lower Miocene up to recent times. In this study, we have reviewed the Colmenar Fault, located at the SW end of the Subbetic ranges, previously interpreted as a Middle Miocene low-angle normal fault. Our results allow to identify younger normal fault segments, to analyse their kinematics, growth and segment linkage, and to discuss its role on the structural and relief drop at regional scale. The Colmenar Fault is folded by post-Serravallian NE-SW buckle folds. Both the SW-dipping fault surfaces and the SW-plunging fold axes contribute to the structural relief drop toward the SW. Nevertheless, at the NW tip of the Colmenar Fault, we have identified unfolded normal faults cutting quaternary soils. They are grouped into a N110˚E striking brittle deformation band 15km long and until 3km wide (hereafter Ubrique Normal Fault Zone; UNFZ). The UNFZ is divided into three sectors: (a) The western tip zone is formed by normal faults which usually dip to the SW and whose slip directions vary between N205˚E and N225˚E. These segments are linked to each other by left-lateral oblique faults interpreted as transfer faults. (b) The central part of the UNFZ is composed of a single N115˚E striking fault segment 2,4km long. Slip directions are around N190˚E and the estimated throw is 1,25km. The fault scarp is well-conserved reaching up to 400m in its central part and diminishing to 200m at both segment terminations. This fault segment is linked to the western tip by an overlap zone characterized by tilted blocks limited by high-angle NNE-SSW and WNW-ESE striking faults interpreted as "box faults" [1]. (c) The eastern tip zone is formed by fault segments with oblique slip which also contribute to the downthrown of the SW block. This kinematic

  5. Beta Dips in the Gaia Era: Simulation Predictions of the Galactic Velocity Anisotropy Parameter (β) (United States)

    Loebman, Sarah; Valluri, Monica; Hattori, Kohei; Debattista, Victor P.; Bell, Eric F.; Stinson, Greg; Christensen, Charlotte; Brooks, Alyson; Quinn, Thomas R.; Governato, Fabio


    Milky Way (MW) science has entered a new era with the advent of Gaia. Combined with spectroscopic survey data, we have newfound access to full 6D phase space information for halo stars. Such data provides an invaluable opportunity to assess kinematic trends as a function of radius and confront simulations with these observations to draw insight about our merger history. I will discuss predictions for the velocity anisotropy parameter, β, drawn from three suites of state-of-the-art cosmological N-body and N-body+SPH MW-like simulations. On average, all three suites predict a monotonically increasing value of β that is radially biased, and beyond 10 kpc, β > 0.5. I will also discuss β as a function of time for individual simulated galaxies. I will highlight when "dips" in β form, the severity (the rarity of β < 0), origin (in situ versus accreted halo), and persistence of these dips. Thereby, I present a cohesive set of predictions of β from simulations for comparison to forthcoming observations.

  6. Programming nanostructures of polymer brushes by dip-pen nanodisplacement lithography (DNL) (United States)

    Liu, Xuqing; Li, Yi; Zheng, Zijian


    We report a facile and versatile scanning probe based approach--dip-pen nanodisplacement lithography (DNL)--for manipulating nanostructures of polymer brushes. Nanostructured polymer brushes with sizes as small as 25 nm are made by DNL patterning of the initiator molecules and subsequent surface-initiated polymerization. Nanoconfinement effects including chain collapsing and spreading are observed in the nanopatterned polymer brushes. In addition to chemical structure, size, topography and shape, our approach can also readily program the grafting density, chain configuration, hierarchical structure and multiplexing of the polymer brushes, which allows for the realization of complex chemical surfaces.We report a facile and versatile scanning probe based approach--dip-pen nanodisplacement lithography (DNL)--for manipulating nanostructures of polymer brushes. Nanostructured polymer brushes with sizes as small as 25 nm are made by DNL patterning of the initiator molecules and subsequent surface-initiated polymerization. Nanoconfinement effects including chain collapsing and spreading are observed in the nanopatterned polymer brushes. In addition to chemical structure, size, topography and shape, our approach can also readily program the grafting density, chain configuration, hierarchical structure and multiplexing of the polymer brushes, which allows for the realization of complex chemical surfaces. Electronic supplementary information (ESI) available: LFM images of MUDBr patterns; digital image of irregular polymer brushes grown on gold caused by random diffusion of MUDBr through the air. See DOI: 10.1039/c0nr00565g

  7. Highly stretchable and conductive fibers enabled by liquid metal dip-coating (United States)

    Zhang, Qiang; Roach, Devin J.; Geng, Luchao; Chen, Haosen; Qi, H. Jerry; Fang, Daining


    Highly stretchable and conductive fibers have been fabricated by dip-coating of a layer of liquid metal (eutectic gallium indium, EGaIn) on printed silicone elastomer filaments. This fabrication method exploits a nanolayer of oxide skin that rapidly forms on the surface of EGaIn when exposed to air. Through dip-coating, the sticky nature of the oxide skin leads to the formation of a thin EGaIn coating (˜5 μm thick) on the originally nonconductive filaments and renders these fibers excellent conductivity. Electrical characterization shows that the fiber resistance increases moderately as the fiber elongates but always maintains conductivity even when stretched by 800%. Besides this, these fibers possess good cyclic electrical stability with little degradation after hundreds of stretching cycles, which makes them an excellent candidate for stretchable conductors. We then demonstrate a highly stretchable LED circuit as well as a conductive stretchable net that extends the 1D fibers into a 2D configuration. These examples demonstrate potential applications for topologically complex stretchable electronics.

  8. Social integration, social contacts, and blood pressure dipping in African-Americans and whites. (United States)

    Troxel, Wendy M; Buysse, Daniel J; Hall, Martica; Kamarck, Thomas W; Strollo, Patrick J; Owens, Jane F; Reis, Steven E; Matthews, Karen A


    Both the size and diversity of an individual's social network are strongly and prospectively linked with cardiovascular morbidity and mortality. Social relationships may influence cardiovascular outcomes, at least in part, via their impact on physiologic pathways influenced by stress, such as daytime blood pressure (BP) levels. However, scant research has examined whether social relationships influence key nocturnal pathways, such as nocturnal BP dipping. The current study examined the degree to which social integration, as measured by participants' reported engagement in a range of different types of social relationships, and the frequency of daily social contacts influence the ratio of night/day mean arterial pressure (MAP) in a community sample of African-American and white men and women (N = 224). In addition, we examined the degree to which observed associations persisted after statistical adjustment for factors known to covary with nocturnal BP, including objective measures of sleep, catecholamines, health behaviors, and comorbidities. In fully adjusted models, there was a significant association between both social integration and frequency of social contacts and the ratio of night/day MAP, indicating that socially isolated individuals were more likely to have blunted nocturnal BP-dipping profiles. There was also a significant interaction between social contact frequency and ethnicity, suggesting that the benefits of social relationships were particularly evident in African-Americans. These findings contribute to our understanding of how social integration or conversely, social isolation, influences cardiovascular risk.

  9. Ecological load decrease by the new order of the flat dipping coal layers opening

    Energy Technology Data Exchange (ETDEWEB)

    Rakishev, B.R. [K.I. Satpaev Kazak National Technical Univ., Astana (Kazakhstan); Moldabaev, S.K. [Ekibastuz Engineering Technical Inst., Ekibastuz (Kazakhstan); Rakisheva, Z.B. [Al-Farabi Kazak National Univ., Almaty (Kazakhstan)


    An innovative method to open the flat dipping coal layer of ore horizons was presented. This paper discussed the accelerated commissioning of mined areas and reduced environmental impact. The distinctive features of the method were also presented. At the first ore horizon, two separate mixed (external-internal) trenches were consistently driven one by another. An internal part of the first mixed trench in the form of descent was temporarily placed on a working pit wall. The track line was straightened until the coincidence of its line with an axis of an external trench part met and then resulted in a stationary position. Specifically, the paper discussed the development of a mathematical model for the stripping of ores and the optimal distribution on external and internal dumps. It was concluded that realization of the innovative way of the flat dipping coal layers opening with ore optimal distribution increased the warehousing volumes in internal dumps by 25-35 per cent and proportionally decreased the ecological load on the environment. 3 figs.

  10. Object-oriented Bayesian networks for evaluating DIP-STR profiling results from unbalanced DNA mixtures. (United States)

    Cereda, G; Biedermann, A; Hall, D; Taroni, F


    The genetic characterization of unbalanced mixed stains remains an important area where improvement is imperative. In fact, with current methods for DNA analysis (Polymerase Chain Reaction with the SGM Plus multiplex kit), it is generally not possible to obtain a conventional autosomal DNA profile of the minor contributor if the ratio between the two contributors in a mixture is smaller than 1:10. This is a consequence of the fact that the major contributor's profile 'masks' that of the minor contributor. Besides known remedies to this problem, such as Y-STR analysis, a new compound genetic marker that consists of a Deletion/Insertion Polymorphism (DIP), linked to a Short Tandem Repeat (STR) polymorphism, has recently been developed and proposed elsewhere in literature. The present paper reports on the derivation of an approach for the probabilistic evaluation of DIP-STR profiling results obtained from unbalanced DNA mixtures. The procedure is based on object-oriented Bayesian networks (OOBNs) and uses the likelihood ratio as an expression of the probative value. OOBNs are retained in this paper because they allow one to provide a clear description of the genotypic configuration observed for the mixed stain as well as for the various potential contributors (e.g., victim and suspect). These models also allow one to depict the assumed relevance relationships and perform the necessary probabilistic computations. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  11. Solar Filament Longitudinal Oscillations along a Magnetic Field Tube with Two Dips

    Energy Technology Data Exchange (ETDEWEB)

    Zhou Yu-Hao; Zhang Li-Yue; Ouyang, Y.; Chen, P. F.; Fang, C., E-mail: [School of Astronomy and Space Science, Nanjing University, Nanjing 210023 (China)


    Large-amplitude longitudinal oscillations of solar filaments have been observed and explored for more than ten years. Previous studies are mainly based on the one-dimensional rigid flux tube model with a single magnetic dip. However, it has been noted that there might be two magnetic dips, and hence two threads, along one magnetic field line. Following previous work, we intend to investigate the kinematics of the filament longitudinal oscillations when two threads are magnetically connected, which is done by solving one-dimensional radiative hydrodynamic equations with the numerical code MPI-AMRVAC. Two different types of perturbations are considered, and the difference from previous works resulting from the interaction of the two filament threads is investigated. We find that even with the inclusion of the thread–thread interaction, the oscillation period is modified weakly, by at most 20% compared to the traditional pendulum model with one thread. However, the damping timescale is significantly affected by the thread–thread interaction. Hence, we should take it into account when applying the consistent seismology to the filaments where two threads are magnetically connected.


    Directory of Open Access Journals (Sweden)

    Hegyi Andreea


    Full Text Available The implementation of the sustainable development concept is nowadays a key issue in almost all human activities. For the constructions domain an European strategy has already been elaborated. Among its goals are also the use of long lasting materials and the reduction of repair costs. This paper presents an interdisciplinary study concerning the efficiency of the use of hot-dip galvanized rebar for concrete structures. Experimental results about corrosion kinetics of coated and usual steel reinforcement embedded in concrete, subjected to chlorine ions attack, are analyzed. Electrochemical methods as chronoamperometry and linear polarization have been used. Corrosion potential values recorded for galvanized steel embedded in concrete indicate an uncertain corrosion activation process up to a rate of 2.5 % calcium chloride relative to concrete. For rates of 5% CaCl2 and more the corrosion process is activated. For unprotected steel bars embedded in concrete the corrosion activation process started at all calcium chloride studied rates and higher corrosion potential values has been registered than for the hot-dip galvanized ones, at the same rates. Economical assessments have been done using entire lifetime cost analysis of the reinforced concrete structures. Despite that the hotdip galvanization is a rather expansive procedure, when taking into account the whole expected life span, the use of zinc coating proves to be efficient both from structural and financial approaches.

  13. Mesures magnétiques du dipôle DH-LEAR 1

    CERN Document Server

    Chritin, R; Patron, G; CERN. Geneva. SPS and LEP Division


    Ce dipôle fait partie d'un ensemble de deux aimants semblables récupérés du LEAR et destinés à être utilisés en dipôles verticaux dans le projet AD. Ce sont des aimants feuilletés, fixés sur un socle composé d'un bloc d'aluminium massif de 10cm d'épaisseur et d'une épaisse tôle en acier munie de pieds réglables. L'aimant en question a donc été mesuré avec ce socle. Les mesures réalisées ont consisté à vérifier les caractéristiques de cet aimant, et en particulier ses polarités électriques et magnétiques, sa courbe de magnétisation, ainsi que l'homogénéité de l'induction intégrée sur l'axe X. Un test d'échauffement a également permis de déterminer son courant d'utilisation maximum.

  14. San Andreas-sized Strike-slip Fault on Europa (United States)


    This mosaic of the south polar region of Jupiter's moon Europa shows the northern 290 kilometers (180 miles) of a strike-slip fault named Astypalaea Linea. The entire fault is about 810 kilometers (500 miles) long, about the size of the California portion of the San Andreas fault, which runs from the California-Mexico border north to the San Francisco Bay. In a strike-slip fault, two crustal blocks move horizontally past one another, similar to two opposing lanes of traffic. Overall motion along the fault seems to have followed a continuous narrow crack along the feature's entire length, with a path resembling steps on a staircase crossing zones that have been pulled apart. The images show that about 50 kilometers (30 miles) of displacement have taken place along the fault. The fault's opposite sides can be reconstructed like a puzzle, matching the shape of the sides and older, individual cracks and ridges broken by its movements. [figure removed for brevity, see original site] The red line marks the once active central crack of the fault. The black line outlines the fault zone, including material accumulated in the regions which have been pulled apart. Bends in the fault have allowed the surface to be pulled apart. This process created openings through which warmer, softer ice from below Europa's brittle ice shell surface, or frozen water from a possible subsurface ocean, could reach the surface. This upwelling of material formed large areas of new ice within the boundaries of the original fault. A similar pulling-apart phenomenon can be observed in the geological trough surrounding California's Salton Sea, in Death Valley and the Dead Sea. In those cases, the pulled-apart regions can include upwelled materials, but may be filled mostly by sedimentary and eroded material from above. One theory is that fault motion on Europa is induced by the pull of variable daily tides generated by Jupiter's gravitational tug on Europa. Tidal tension opens the fault and


    International Nuclear Information System (INIS)

    Stauffer, John; Cody, Ann Marie; Rebull, Luisa; Plavchan, Peter; Carey, Sean; McGinnis, Pauline; Alencar, Silvia H. P.; Hillenbrand, Lynne A.; Carpenter, John; Turner, Neal J.; Terebey, Susan; Morales-Calderón, María; Bouvier, Jerome; Venuti, Laura; Hartmann, Lee; Calvet, Nuria; Micela, Giusi; Flaccomio, Ettore; Song, Inseok; Gutermuth, Rob


    We identify nine young stellar objects (YSOs) in the NGC 2264 star-forming region with optical CoRoT light curves exhibiting short-duration, shallow periodic flux dips. All of these stars have infrared excesses that are consistent with their having inner disk walls near the Keplerian co-rotation radius. The repeating photometric dips have FWHMs generally less than 1 day, depths almost always less than 15%, and periods (3 < P < 11 days) consistent with dust near the Keplerian co-rotation period. The flux dips vary considerably in their depth from epoch to epoch, but usually persist for several weeks and, in two cases, were present in data collected in successive years. For several of these stars, we also measure the photospheric rotation period and find that the rotation and dip periods are the same, as predicted by standard “disk-locking” models. We attribute these flux dips to clumps of material in or near the inner disk wall, passing through our line of sight to the stellar photosphere. In some cases, these dips are also present in simultaneous Spitzer IRAC light curves at 3.6 and 4.5 microns. We characterize the properties of these dips, and compare the stars with light curves exhibiting this behavior to other classes of YSOs in NGC 2264. A number of physical mechanisms could locally increase the dust scale height near the inner disk wall, and we discuss several of those mechanisms; the most plausible mechanisms are either a disk warp due to interaction with the stellar magnetic field or dust entrained in funnel-flow accretion columns arising near the inner disk wall


    Energy Technology Data Exchange (ETDEWEB)

    Stauffer, John; Cody, Ann Marie; Rebull, Luisa; Plavchan, Peter; Carey, Sean [Spitzer Science Center, California Institute of Technology, Pasadena, CA 91125 (United States); McGinnis, Pauline; Alencar, Silvia H. P. [Departamento de Física—ICEx—UFMG, Av. Antônio Carlos, 6627, 30270-901, Belo Horizonte, MG (Brazil); Hillenbrand, Lynne A.; Carpenter, John [Astronomy Department, California Institute of Technology, Pasadena, CA 91125 (United States); Turner, Neal J. [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States); Terebey, Susan [Department of Physics and Astronomy, 5151 State University Drive, California State University at Los Angeles, Los Angeles, CA 90032 (United States); Morales-Calderón, María [Centro de Astrobiología, Dpto. de Astrofísica, INTA-CSIC, PO BOX 78, E-28691, ESAC Campus, Villanueva de la Cañada, Madrid (Spain); Bouvier, Jerome; Venuti, Laura [Université de Grenoble, Institut de Planétologie et d’Astrophysique de Grenoble (IPAG), F-38000 Grenoble (France); CNRS, IPAG, F-38000 Grenoble (France); Hartmann, Lee; Calvet, Nuria [Department of Astronomy, University of Michigan, 500 Church Street, Ann Arbor, MI 48105 (United States); Micela, Giusi; Flaccomio, Ettore [INAF—Osservatorio Astronomico di Palermo, Piazza del Parlamento 1, I-90134, Palermo (Italy); Song, Inseok [Department of Physics and Astronomy, The University of Georgia, Athens, GA 30602–2451 (United States); Gutermuth, Rob, E-mail: [Department of Astronomy, University of Massachusetts, Amherst, MA 01003 (United States); and others


    We identify nine young stellar objects (YSOs) in the NGC 2264 star-forming region with optical CoRoT light curves exhibiting short-duration, shallow periodic flux dips. All of these stars have infrared excesses that are consistent with their having inner disk walls near the Keplerian co-rotation radius. The repeating photometric dips have FWHMs generally less than 1 day, depths almost always less than 15%, and periods (3 < P < 11 days) consistent with dust near the Keplerian co-rotation period. The flux dips vary considerably in their depth from epoch to epoch, but usually persist for several weeks and, in two cases, were present in data collected in successive years. For several of these stars, we also measure the photospheric rotation period and find that the rotation and dip periods are the same, as predicted by standard “disk-locking” models. We attribute these flux dips to clumps of material in or near the inner disk wall, passing through our line of sight to the stellar photosphere. In some cases, these dips are also present in simultaneous Spitzer IRAC light curves at 3.6 and 4.5 microns. We characterize the properties of these dips, and compare the stars with light curves exhibiting this behavior to other classes of YSOs in NGC 2264. A number of physical mechanisms could locally increase the dust scale height near the inner disk wall, and we discuss several of those mechanisms; the most plausible mechanisms are either a disk warp due to interaction with the stellar magnetic field or dust entrained in funnel-flow accretion columns arising near the inner disk wall.

  17. Quantification of coumarin in cinnamon and woodruff beverages using DIP-APCI-MS and LC-MS. (United States)

    Krieger, Sonja; Hayen, Heiko; Schmitz, Oliver J


    The use of the direct inlet probe-atmospheric-pressure chemical ionization (DIP-APCI) ion source developed in our laboratory coupled to a high resolution Q-TOF MS for the quantitative analysis of coumarin in different cinnamon samples was demonstrated in this study. Extraction of coumarin from various cinnamon samples was followed by DIP-APCI-mass spectrometry (MS) and liquid chromatography (LC)-MS analysis. For quantification, an external calibration with and without the use of stable isotope-labeled coumarin as internal standard was compared. The results obtained by DIP-APCI-MS and LC-MS were in good agreement. Even without the use of an internal standard satisfying linearity (R(2) > 0.997), recovery (94-104% for spiking levels between 100 and 5,000 mg/kg) and intra- and interday repeatability (2.2-13.8%RSD) was demonstrated using DIP-APCI-MS. To reduce the number of samples requiring quantitative analysis, the possibility of semi-quantitative screening of coumarin directly from powdered cinnamon using DIP-APCI-MS was shown. The analysis of woodruff-flavored beverages and cinnamon-flavored chewing gum by DIP-APCI-MS resulted in the formation of an artifact interfering with coumarin detection. As with other ambient ionization methods, special attention has to be paid to possible spectral interferences due to isobaric substances present in the sample matrix or formed from matrix components after ionization. The temperature-programmed vaporization in DIP-APCI-MS combined with the use of stable isotope-labeled coumarin as internal standard helped in recognizing this interference.

  18. Effect of public transport strikes on air pollution levels in Barcelona (Spain). (United States)

    Basagaña, Xavier; Triguero-Mas, Margarita; Agis, David; Pérez, Noemí; Reche, Cristina; Alastuey, Andrés; Querol, Xavier


    Public transport strikes can lead to an increase of the number of private vehicle trips, which in turn can increase air pollution levels. We aimed to estimate the change in air pollution concentrations during public transport strikes in the city of Barcelona (Spain). Data on strikes of the metro, train or bus systems were collected from government records (2005-2016). We collected daily concentrations of NOx; particulate matter with an aerodynamic diameter smaller than 10μm (PM10), 2.5μm (PM2.5), and 1μm (PM1); particle number concentration (N); black carbon (BC) and CO from research and official monitoring stations. We fitted linear regression models for each pollutant with the strike indicator as an independent variable, and models were adjusted for day of the week, month, year, and holiday periods. During the study period, there were 208days affected by a strike of the metro (28), train (106) or bus (91) systems. Half of the strikes were partial, most of them were single-day strikes, there was little overlap between strikes of the different transport systems, and all strikes had to comply with mandatory minimal services. When pooling all types of strikes, NOx and BC showed higher levels during strike days in comparison with non-strike days (increase between 4.1% and 7.7%, with higher increases for NO). The increases in these concentrations were more evident during full day and multiday metro strikes. In conclusion, alterations in public transport have consequences on air quality. This highlights the importance of public transport in reducing air pollution concentrations in cities. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. The assessment of lethal propeller strike injuries in sea mammals. (United States)

    Byard, Roger W; Winskog, Calle; Machado, Aaron; Boardman, Wayne


    Assessment of injuries in marine mammals may be required to help authorities determine whether human activity was involved. Three cases of marine animal deaths involving propeller blade strikes are reported to demonstrate characteristic features of such cases and diagnostic difficulties that may occur. Case 1: A juvenile New Zealand fur seal (Arctocephalus forsteri) suffered two parallel linear incised wounds of the flank and died following small intestinal herniation. Case 2: An Indo-Pacific bottlenose dolphin neonate (Tursiops aduncus) died from a deeply incised wound of the left side of the head with shattering of the skull and laceration of the underlying brain.Case 3: An adult female Indo-Pacific bottlenose dolphin (T. aduncus) died from two parallel chop wounds to the torso with opening of the thoracic and abdominal cavities with fractures of the ribs and vertebrae. Given that some animals may recover, and that the carcasses of those that are killed may simply not be found or reported, it is impossible to provide an estimate of the incidence of this type of injury amongst wild sea mammals. In cases that do come to forensic attention accurate evaluation of the type of injury may potentially have great medicolegal significance. Post-mortem putrefaction and post-mortem feeding by other sea animals may complicate assessments. Copyright © 2012 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

  20. Cellular nonlinear networks for strike-point localization at JET (United States)

    Arena, P.; Fortuna, L.; Bruno, M.; Vagliasindi, G.; Murari, A.; Andrew, P.; Mazzitelli, G.


    At JET, the potential of fast image processing for real-time purposes is thoroughly investigated. Particular attention is devoted to smart sensors based on system on chip technology. The data of the infrared cameras were processed with a chip implementing a cellular nonlinear network (CNN) structure so as to support and complement the magnetic diagnostics in the real-time localization of the strike-point position in the divertor. The circuit consists of two layers of complementary metal-oxide semiconductor components, the first being the sensor and the second implementing the actual CNN. This innovative hardware has made it possible to determine the position of the maximum thermal load with a time resolution of the order of 30 ms. Good congruency has been found with the measurement from the thermocouples in the divertor, proving the potential of the infrared data in locating the region of the maximum thermal load. The results are also confirmed by JET magnetic codes, both those used for the equilibrium reconstructions and those devoted to the identification of the plasma boundary.

  1. Cellular nonlinear networks for strike-point localization at JET

    International Nuclear Information System (INIS)

    Arena, P.; Fortuna, L.; Bruno, M.; Vagliasindi, G.; Murari, A.; Andrew, P.; Mazzitelli, G.


    At JET, the potential of fast image processing for real-time purposes is thoroughly investigated. Particular attention is devoted to smart sensors based on system on chip technology. The data of the infrared cameras were processed with a chip implementing a cellular nonlinear network (CNN) structure so as to support and complement the magnetic diagnostics in the real-time localization of the strike-point position in the divertor. The circuit consists of two layers of complementary metal-oxide semiconductor components, the first being the sensor and the second implementing the actual CNN. This innovative hardware has made it possible to determine the position of the maximum thermal load with a time resolution of the order of 30 ms. Good congruency has been found with the measurement from the thermocouples in the divertor, proving the potential of the infrared data in locating the region of the maximum thermal load. The results are also confirmed by JET magnetic codes, both those used for the equilibrium reconstructions and those devoted to the identification of the plasma boundary

  2. Konstruksi vektor biner untuk ekspresi gen dip22 yang diisolasi dari tebu varietas M 442-51 pada tanaman

    Directory of Open Access Journals (Sweden)

    Wiwit Budi Widyasari


    Full Text Available Sugarcane is the principle plant for producing sugar in Indonesia. Water supply is one key element in the agronomy of sugarcane. Sugarcane is a high biomass crop which requires large amounts of water. Low yields of sugar observed in water stressed plants indicate that sugarcane is very sensititive to drought. A number of genes that respond to drought, salt, and cold stress at the trasnscriptional level have been reported. dip22 (drought inducible protein protein isolated from drought resistance variety M 442-51 was predicted to be a protein regulator to water stress in sugarcane. Increasing of tolerance to water stress by over expression of dip22 genes in high yield sugarcane variety hopefully will maintain sugar production. The goal of this research was to construct a binary vector for dip22 gene expression in plant. dip22 gene from mutated PCR was cloned to pGEM ® €“T Easy and transformed to Escherichia coli strain DH5a. And then, these gene was isolated again from pGEM ® €“T Easy-dip22 (pGdip plasmid using restriction enzymes NcoI and PmlI. pCAMBIA 1303 plasmid is an expression vector which has the constitutive promoter CaMV35S. Recombinant plasmid was transformed to Escherichia coli strain DH5a for plasmid propagation through DNA replication. Recombinant plasmid was isolated, and digested with NcoI and PmlI to examine the presence of dip22 gene in the pCAMBIA 1303 plasmid. The recombinant plasmid was transformed to A. tumefaciens strain LBA 4404. Plasmid isolated from A. tumefaciens was digested with Bst XI and Bst EII to examine the similarity between pCAMBIA 1303-dip22 (pCdip from Escherichia coli and A. tumefaciens. The result by electrophoresis showed that both plasmids had the same size after digested. It was concluded that the transformed A. tumefaciens strain LBA 4404 bacteria has pCAMBIA 1303-dip22 (pCdip plasmid indeed. Therefore, this construct of dip22 gene in binary vector can be used for improving drought tolerance in

  3. The exploratory behaviour of rats in the hole-board apparatus: is head-dipping a valid measure of neophilia? (United States)

    Brown, Gillian R; Nemes, Christopher


    The exploratory behaviour of laboratory rodents is of interest within a number of areas of behavioural pharmacology. However, how best to measure exploratory behaviour in rodents remains a contentious issue. Many unconditioned tests, such as the open field, potentially confound general locomotor activity with exploration. The hole-board apparatus appears to avoid this confound, as head-dipping into holes in the floor is assumed to be a valid measure of the subject's attraction towards novelty (neophilia). This study aimed to investigate whether head-dipping should be considered a valid measure of neophilia by comparing performance of adult male and female Lister hooded rats on the hole-board task (a) over repeated sessions and (b) when novel objects were absent or present underneath the holes. The results show that head-dipping initially decreased across repeated exposures, while time spent in the aversive central area increased. No change in head-dipping was seen in response to objects being placed underneath the holes. Rather than being a measure of neophilia, these results support the hypothesis that head-dipping represents an escape response, which declines as the subject becomes less fearful. These results are compared with previous studies of repeated exposure to other novel environments.

  4. The use of a pour-on and spray dip containing Amitraz to control ticks (Acari : Ixodidae on cattle

    Directory of Open Access Journals (Sweden)

    R. Peter


    Full Text Available Knockdown and persistence efficacies of a pour-on containing Amitraz 1 % and Cypermethrin 1 % and a spray dip containing 12.5 % Amitraz were compared. Knock-down and persistence efficacies of the Amitraz spray dip against Rhipicephalus (Boophilus decoloratus and Amblyomma hebraeum were significantly higher for the duration of the trial than those of the pour-on. In the case of Rhipicephalus appediculatus and Rhipicephalus evertsi evertsi, efficacy was significantly higher on Days 2 and 5. Resistance testing prior to the start of the trial indicated that R. (B. decoloratus was resistant to both Cypermethrin and Amitraz, yet in the case of the spray dip excellent efficacy results were obtained. It is thought that the cattle's scruffy winter coat may have hindered the spread of the pour-on, but that the thorough wetting and especially the higher concentration of active ingredient applied via the spray dip allowed this formulation to be effective. These results show that under certain conditions a spray dip containing 12.5 % Amitraz may be more effective than a pour-on containing 1 % Amitraz and 1 % Cypermethrin, despite apparent in vitro resistance.

  5. Along-dip variations of structural style in the Somali Basin deep-water fold and thrust belt (East Africa) (United States)

    Cruciani, Francesco; Rinaldo Barchi, Massimiliano


    Continental passive margins are place of extended slope-failure phenomena, which can lead to the formation of gravity-driven deep-water fold and thrust belts (DW-FTBs), in regions where no far-field compressional stress is active. These giant geological features, which are confined to the sedimentary section, consist of extensional-compressional linked systems detached over a common décollement, generally salt or shales. The continental passive margin of northern Kenya and southern Somalia is an excellent and relatively unexplored site for recognizing and understanding the DW-FTBs originated over a regional shale décollement. In this study we have interpreted a 2D seismic data-set of the 1980s, hosted by Marine Geoscience Data System at Lamont-Doherty Earth Observatory of Columbia University (, and recently reprocessed by ENI, in order to investigate the structural style of a DW-FTB developed offshore of northern Kenya and southern Somalia (Somali Basin). This region records the oldest sedimentary section of the Indian Ocean since the breakup of Gondwana began in the Middle-Lower Jurassic separating Madagascar from Africa. From the Upper Cretaceous to at least the Lower Miocene, the margin has been characterized by gravitational collapse leading to the formation of a DW-FTB extending more than 400 km along-strike. The northern portion of the DW-FTB is about 150 km wide, whilst in the southern portion is few tens of km wide. We analysed the northern portion along a regional seismic section. Our study represents the first detailed structural interpretation of this DW-FTB since its discovery in the 1980s. The good quality of the available reprocessed seismic data has allowed us to identify remarkable along-dip variations in the structural style. The basal detachment constantly deepens landward, in agreement with a prevailing gravity-spreading deformation process (as in the case of the Niger Delta). On the seismic data are not visible, as

  6. Conventional Prompt Global Strike and Long-Range Ballistic Missiles: Background and Issues (United States)


    Silver Bullet? Asking the Right Questions About Conventional Prompt Global Strike (Washington, DC: Carneige Endowment for International Peace, 2013), pp...124 James M. Acton, Silver Bullet? Asking the Right Questions About Prompt Global Strike (Washington, DC: Carnegie Endowment for International Peace, 2013), pp. 120-129. ...Conventional Prompt Global Strike and Long-Range Ballistic Missiles: Background and Issues Amy F. Woolf Specialist in Nuclear Weapons Policy

  7. Vessel Strike of Whales in Australia: The Challenges of Analysis of Historical Incident Data

    Directory of Open Access Journals (Sweden)

    David Peel


    Full Text Available Death or injury to whales from vessel strike is one of the primary threats to whale populations worldwide. However, quantifying the rate of occurrence of these collisions is difficult because many incidents are not detected (particularly from large vessels and therefore go unreported. Furthermore, varying reporting biases occur related to species identification, spatial coverage of reports and type of vessels involved. The International Whaling Commission (IWC has compiled a database of the worldwide occurrence of vessel strikes to cetaceans, within which Australia constitutes ~7% (35 reports of the reported worldwide (~471 reports vessel strike records involving large whales. Worldwide records consist largely of modern reports within the last two decades and historical evaluation of ship strike reports has mainly focused on the Northern Hemisphere. To address this we conducted a search of historical national and international print media archive databases to discover reports of vessel strikes globally, although with a focus on Australian waters. A significant number of previously unrecorded reports of vessel strikes were found for both Australia (76 and worldwide (140, resulting in a revised estimate of ~15% of global vessel strikes occurring in Australian waters. This detailed collation and analysis of vessel strike data in an Australian context has contributed to our knowledge of the worldwide occurrence of vessel strikes and challenges the notion that vessel strikes were historically rare in Australia relative to the rest of the world. The work highlights the need to examine historical records to provide context around current anthropogenic threats to marine fauna and demonstrates the importance of formalized reporting structures for effective collation of vessel strike reports. This paper examines the issues and biases in analysis of vessel strike data in general that would apply to any jurisdiction. Using the Australian data as an example

  8. Endothelial perturbation: a link between non-dipping and retinopathy in type 2 diabetes?

    DEFF Research Database (Denmark)

    Knudsen, Søren Tang; Jeppesen, Peter; Frederiksen, Christian Alcaraz


    -six subjects, stratified to 4 gender-, age-, and duration-matched groups of 19 subjects each, were studied (group A: non-diabetic subjects; group B to D, type 2 diabetic subjects; group B: no retinopathy; group C: minimal background retinopathy; group D: diabetic maculopathy). All subjects underwent a 24-hour......Reduced diurnal blood pressure (BP) variation ("non-dipping") is associated with both micro- and macrovascular complications in patients with type 2 diabetes. The relation between endothelial perturbation and diurnal BP variation in diabetic subjects has not previously been studied. Seventy...... ambulatory BP monitoring. von Willebrand factor (vWF), fibrinogen, E-selectin, and intercellular adhesion molecule-1 were measured in plasma. Systolic night/day BP ratio increased gradually in groups A to D: 85.2 +/- 5%, 85.7 +/- 7%, 88.5 +/- 6%, and 90.5 +/- 7%, respectively, P diabetic...

  9. Lamb dip CRDS of highly saturated transitions of water near 1.4 μm (United States)

    Kassi, S.; Stoltmann, T.; Casado, M.; Daëron, M.; Campargue, A.


    Doppler-free saturated-absorption Lamb dips were measured at sub-Pa pressures on rovibrational lines of H216O near 7180 cm-1, using optical feedback frequency stabilized cavity ring-down spectroscopy. The saturation of the considered lines is so high that at the early stage of the ring down, the cavity loss rate remains unaffected by the absorption. By referencing the laser source to an optical frequency comb, transition frequencies are determined down to 100 Hz precision and kHz accuracy. The developed setup allows resolving highly K-type blended doublets separated by about 10 MHz (to be compared to a HWHM Doppler width on the order of 300 MHz). A comparison with the most recent spectroscopic databases is discussed. The determined K-type splittings are found to be very well predicted by the most recent variational calculations.

  10. Conductance dips and spin precession in a nonuniform waveguide with spin–orbit coupling

    Energy Technology Data Exchange (ETDEWEB)

    Malyshev, A. I., E-mail:; Kozulin, A. S. [Lobachevsky Nizhny Novgorod State University (Russian Federation)


    An infinite waveguide with a nonuniformity, a segment of finite length with spin–orbit coupling, is considered in the case when the Rashba and Dresselhaus parameters are identical. Analytical expressions have been derived in the single-mode approximation for the conductance of the system for an arbitrary initial spin state. Based on numerical calculations with several size quantization modes, we have detected and described the conductance dips arising when the waves are localized in the nonuniformity due to the formation of an effective potential well in it. We show that allowance for the evanescent modes under carrier spin precession in an effective magnetic field does not lead to a change in the direction of the average spin vector at the output of the system.

  11. Electric power quality analysis methods. Application to voltage dips and harmonic disturbances

    International Nuclear Information System (INIS)

    Vanya, Ignatova


    The power quality concerns all the actors in the energy domains, that they are network administrators, suppliers, producers, or consumers of electricity. The research work presented in this PhD thesis is situated in the field of the power quality monitoring. Its objective is to introduce new techniques for analysis of power quality problems. There are different methods designed for the analysis of the power quality disturbances. This method reaches very good performances in the voltage dips analysis, as it allows segmenting, classifying and characterising these power quality disturbances. The periodic systems method allows the theoretical study of the generation and the propagation of harmonic disturbances in the network. Finally, the statistical matrix method has the objective to represent statistically electrical signals without loss of important information. (author)

  12. Rectenna à 2.45 GHz utilisant une antenne à dipôle arrondi


    Okba , Abderrahim; Takacs , Alexandru; Aubert , Hervé


    National audience; Cet article présente la conception et les résultats obtenus pour une rectenna fonctionnant dans les bandes UMTS et ISM. Cette rectenna, développée pour des applications 'Internet des Objets', est composée d'une antenne à dipôle arrondi et d'un redresseur haute efficacité. Les résultats expérimentaux montrent de très bonnes performances pour cette rectenna. Le redresseur peut délivrer 490µW sur une charge de 1.5KΩ pour une puissance RF en entrée du redresseur de 0 dBm....

  13. Dissolution-Induced Nanowire Synthesis on Hot-Dip Galvanized Surface in Supercritical Carbon Dioxide. (United States)

    Kaleva, Aaretti; Saarimaa, Ville; Heinonen, Saara; Nikkanen, Juha-Pekka; Markkula, Antti; Väisänen, Pasi; Levänen, Erkki


    In this study, we demonstrate a rapid treatment method for producing a needle-like nanowire structure on a hot-dip galvanized sheet at a temperature of 50 °C. The processing method involved only supercritical carbon dioxide and water to induce a reaction on the zinc surface, which resulted in growth of zinc hydroxycarbonate nanowires into flower-like shapes. This artificial patina nanostructure predicts high surface area and offers interesting opportunities for its use in industrial high-end applications. The nanowires can significantly improve paint adhesion and promote electrochemical stability for organic coatings, or be converted to ZnO nanostructures by calcining to be used in various semiconductor applications.

  14. Perceived Discrimination and Nocturnal Blood Pressure Dipping Among Hispanics: The Influence of Social Support and Race. (United States)

    Rodriguez, Carlos Jose; Gwathmey, TanYa M; Jin, Zhezhen; Schwartz, Joseph; Beech, Bettina M; Sacco, Ralph L; Di Tullio, Marco R; Homma, Shunichi


    Little is known about the relationship of perceived racism to ambulatory blood pressure (ABP) in Hispanics. We explored possible associations between ABP nocturnal dipping and perceived racism in a Hispanic cohort. Participants included 180 community-dwelling Hispanics from the Northern Manhattan Study. Measures included perceived racism, socioeconomic status, social support, and ABP monitoring. Nocturnal ABP nondipping was defined as a less than 10% decline in the average asleep systolic blood pressure relative to the awake systolic blood pressure. Overall, 77.8% of participants reported some form of perceived racism (Perceived Ethnic Discrimination Questionnaire scores >1.0). Greater social support was associated with less perceived discrimination (Spearman r = -0.54, p pressure levels during daytime exposures to discrimination.

  15. Dissolution-Induced Nanowire Synthesis on Hot-Dip Galvanized Surface in Supercritical Carbon Dioxide

    Directory of Open Access Journals (Sweden)

    Aaretti Kaleva


    Full Text Available In this study, we demonstrate a rapid treatment method for producing a needle-like nanowire structure on a hot-dip galvanized sheet at a temperature of 50 °C. The processing method involved only supercritical carbon dioxide and water to induce a reaction on the zinc surface, which resulted in growth of zinc hydroxycarbonate nanowires into flower-like shapes. This artificial patina nanostructure predicts high surface area and offers interesting opportunities for its use in industrial high-end applications. The nanowires can significantly improve paint adhesion and promote electrochemical stability for organic coatings, or be converted to ZnO nanostructures by calcining to be used in various semiconductor applications.

  16. Point-Mass Model for Nano-Patterning Using Dip-Pen Nanolithography (DPN

    Directory of Open Access Journals (Sweden)

    Seok-Won Kang


    Full Text Available Micro-cantilevers are frequently used as scanning probes and sensors in micro-electromechanical systems (MEMS. Usually micro-cantilever based sensors operate by detecting changes in cantilever vibration modes (e.g., bending or torsional vibration frequency or surface stresses - when a target analyte is adsorbed on the surface. The catalyst for chemical reactions (i.e., for a specific analyte can be deposited on micro-cantilevers by using Dip-Pen Nanolithography (DPN technique. In this study, we simulate the vibration mode in nano-patterning processes by using a Point-Mass Model (or Lumped Parameter Model. The results from the simulations are used to derive the stability of writing and reading mode for a particular driving frequency during the DPN process. In addition, we analyze the sensitivity of the tip-sample interaction forces in fluid (ink solution by utilizing the Derjaguin-Muller-Toporov (DMT contact theory.

  17. ‘The Nairobi General Strike [1950]: from protest to insurgency’


    Hyde, David


    The Nairobi General Strike [1950] was the culmination of Kenya’s post war strike wave and urban upheaval. An unprecedented upsurge occurred with the general strikes in Mombasa [1947] led by the African Workers Federation [A.W.F.] and in Nairobi by the East African Trades Union Congress [E.A.T.U.C.]. While this has been termed and treated as a city wide strike, there is enough evidence to suggest a movement that went some way beyond Nairobi. The extent of the cohesion and reciprocal impacts am...

  18. Operational Functions to Achieve Synergy between Special Operations and Precision Strike

    National Research Council Canada - National Science Library

    Huff, William M


    ...). The paper describes the operational functions required from the appointed operational commander and his staff to achieve synergism through the combination of special operations and precision strike...

  19. New tools for digital medical image processing implemented in DIP software

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Erica A.C.; Santana, Ivan E. [Instituto Federal de Educacao, Ciencia e Tecnologia de Pernambuco, Recife, PE (Brazil); Lima, Fernando R.A., E-mail: [Centro Regional de Ciencias Nucleares, (CRCN/NE-CNEN-PE), Recife, PE (Brazil); Viera, Jose W. [Escola Politecnica de Pernambuco, Recife, PE (Brazil)


    The anthropomorphic models used in computational dosimetry, also called phantoms, are mostly built from stacks of images CT (Computed Tomography) or MRI (Magnetic Resonance Imaging) obtained from scans of patients or volunteers. The construction of voxel phantoms requires computational processing for transforming image formats, dimensional image compression (2D) to form three-dimensional arrays (3D), quantization, resampling, enhancement, restoration and image segmentation, among others. Hardly the computational dosimetry researcher finds all these skills into a single software and often it results in a decreased development of their research or inadequate use of alternative tools. The need to integrate the various tasks of the original digital image processing to obtain an image that can be used in a computational model of exposure led to the development of software DIP (Digital Image Processing). This software reads, writes and edits binary files containing the 3D matrix corresponding to a stack of cross-sectional images of a given geometry that can be a human body or other volume of interest. It can also read any type of computer image and do conversions. When the task involves only one output image, it is saved in the JPEG standard Windows. When it involves a stack of images, the binary output file is called SGI (Interactive Graphic Simulations, a symbol already used in other publications of the Research Group in Numerical Dosimetry). The following paper presents the third version of the DIP software and emphasizes the new tools it implemented. Currently it has the menus Basics, Views, Spatial Domain, Frequency Domain, Segmentations and Study. Each menu contains items and subitems with features that generally require an image as input and produce an image or an attribute in the output. (author)

  20. A rapid and robust method of identifying transformed Arabidopsis thaliana seedlings following floral dip transformation

    Directory of Open Access Journals (Sweden)

    Gray John C


    Full Text Available Abstract Background The floral dip method of transformation by immersion of inflorescences in a suspension of Agrobacterium is the method of choice for Arabidopsis transformation. The presence of a marker, usually antibiotic- or herbicide-resistance, allows identification of transformed seedlings from untransformed seedlings. Seedling selection is a lengthy process which does not always lead to easily identifiable transformants. Selection for kanamycin-, phosphinothricin- and hygromycin B-resistance commonly takes 7–10 d and high seedling density and fungal contamination may result in failure to recover transformants. Results A method for identifying transformed seedlings in as little as 3.25 d has been developed. Arabidopsis T1 seeds obtained after floral dip transformation are plated on 1% agar containing MS medium and kanamycin, phosphinothricin or hygromycin B, as appropriate. After a 2-d stratification period, seeds are subjected to a regime of 4–6 h light, 48 h dark and 24 h light (3.25 d. Kanamycin-resistant and phosphinothricin-resistant seedlings are easily distinguished from non-resistant seedlings by green expanded cotyledons whereas non-resistant seedlings have pale unexpanded cotyledons. Seedlings grown on hygromycin B differ from those grown on kanamycin and phosphinothricin as both resistant and non-resistant seedlings are green. However, hygromycin B-resistant seedlings are easily identified as they have long hypocotyls (0.8–1.0 cm whereas non-resistant seedlings have short hypocotyls (0.2–0.4 cm. Conclusion The method presented here is an improvement on current selection methods as it allows quicker identification of transformed seedlings: transformed seedlings are easily discernable from non-transformants in as little as 3.25 d in comparison to the 7–10 d required for selection using current protocols.

  1. New tools for digital medical image processing implemented in DIP software

    International Nuclear Information System (INIS)

    Araujo, Erica A.C.; Santana, Ivan E.; Lima, Fernando R.A.; Viera, Jose W.


    The anthropomorphic models used in computational dosimetry, also called phantoms, are mostly built from stacks of images CT (Computed Tomography) or MRI (Magnetic Resonance Imaging) obtained from scans of patients or volunteers. The construction of voxel phantoms requires computational processing for transforming image formats, dimensional image compression (2D) to form three-dimensional arrays (3D), quantization, resampling, enhancement, restoration and image segmentation, among others. Hardly the computational dosimetry researcher finds all these skills into a single software and often it results in a decreased development of their research or inadequate use of alternative tools. The need to integrate the various tasks of the original digital image processing to obtain an image that can be used in a computational model of exposure led to the development of software DIP (Digital Image Processing). This software reads, writes and edits binary files containing the 3D matrix corresponding to a stack of cross-sectional images of a given geometry that can be a human body or other volume of interest. It can also read any type of computer image and do conversions. When the task involves only one output image, it is saved in the JPEG standard Windows. When it involves a stack of images, the binary output file is called SGI (Interactive Graphic Simulations, a symbol already used in other publications of the Research Group in Numerical Dosimetry). The following paper presents the third version of the DIP software and emphasizes the new tools it implemented. Currently it has the menus Basics, Views, Spatial Domain, Frequency Domain, Segmentations and Study. Each menu contains items and subitems with features that generally require an image as input and produce an image or an attribute in the output. (author)

  2. Kondo peak splitting and Kondo dip in single molecular magnet junctions

    Energy Technology Data Exchange (ETDEWEB)

    Niu, Pengbin, E-mail: [Institute of Solid State Physics, Shanxi Datong University, Datong 037009 (China); Shi, Yunlong; Sun, Zhu [Institute of Solid State Physics, Shanxi Datong University, Datong 037009 (China); Nie, Yi-Hang [Institute of Theoretical Physics, Shanxi University, Taiyuan 030006 (China); Luo, Hong-Gang [Center for Interdisciplinary Studies & Key Laboratory for Magnetism and Magnetic Materials of the MoE, Lanzhou University, Lanzhou 730000 (China); Beijing Computational Science Research Center, Beijing 100084 (China)


    Many factors containing bias, spin–orbit coupling, magnetic fields applied, and so on can strongly influence the Kondo effect, and one of the consequences is Kondo peak splitting (KPS). It is natural that KPS should also appear when another spin degree of freedom is involved. In this work we study the KPS effects of single molecular magnets (SMM) coupled with two metallic leads in low-temperature regime. It is found that the Kondo transport properties are strongly influenced by the exchange coupling and anisotropy of the magnetic core. By employing Green's function method in Hubbard operator representation, we give an analytical expression for local retarded Green's function of SMM and discussed its low-temperature transport properties. We find that the anisotropy term behaves as a magnetic field and the splitting behavior of exchange coupling is quite similar to the spin–orbit coupling. These splitting behaviors are explained by introducing inter-level or intra-level transitions, which account for the seven-peak splitting structure. Moreover, we find a Kondo dip at Fermi level under proper parameters. These Kondo peak splitting behaviors in SMM deepen our understanding to Kondo physics and should be observed in the future experiments. - Highlights: • We study Kondo peak splitting in single molecular magnets. • We study Kondo effect by Hubbard operator Green's function method. • We find Kondo peak splitting structures and a Kondo dip at Fermi level. • The exchange coupling and magnetic anisotropy induce fine splitting structure. • The splitting structures are explained by inter-level or intra-level transitions.

  3. The Chinese nuclear arsenal and its second-strike capability

    International Nuclear Information System (INIS)

    Cabestan, Jean-Pierre


    It is well known that China possesses a second- strike capability, but a great deal of uncertainty persists on the subject. Over the last few years, without officially adjusting its doctrine, China has nonetheless defined its objectives. In April 2010, the People's Liberation Army Daily indicated that China needed such a capability and contended that ballistic missile submarines (SSBNs) would constitute the safest means of delivery. In the same year, the IISS estimated that the People's Liberation Army was in possession of 90 ICBMs (66 ground-based missiles and 24 SLBMs) and 400 IRBM mainly aimed at Taiwan and Japan. The Pentagon's 2012 report proposed 50-75 ICBMs and 80 -120 IRBM and MRBM. While it is established that the People's Liberation Army is developing Jin class submarines (type-094, of which there are currently two in service, which will soon rise to five) and is developing solid-propellant missiles, which could be activated more quickly, not a great deal is known about the progress of these two projects. The JL-2 (7400 km), which is mounted on SSBNs, is still being tested. In parallel, the traditional principle to which China adheres - no first use of nuclear weapons - seems to have been slightly dented. Thus, in January 2011, the Japanese press agency Kyodo (relayed by Stratfor) reported that the People's Liberation Army had lowered the threshold for use of its strategic weapons: it could henceforth envisage a preventive nuclear strike against a nuclear power that had by conventional means destroyed key strategic targets on its territory, such as a nuclear power station, a dam, or a large city, having provided prior warning to the aggressor. But what most worries the U.S. and its Asian allies, particularly the Japanese, is the quasi-total opacity of the Chinese military nuclear programme. While in April 2010, the United States and Russia signed a treaty limiting their number of strategic weapons to 1550 by 2018, China considers

  4. Head-dipping by rats with lesions of superior colliculus during extended testing in hole-board. (United States)

    Dean, P; Redgrave, P


    It has previously been shown that rats with large lesions of the superior colliculus fail to head-dip during a 5 min hole-board test. To investigate whether this was a permanent deficit in exploratory behaviour arising from inability to produce the appropriate responses, collicular rats were tested in a hole-board for 60 min or more. The period before their first head-dip (mean 27 min 40 sec) was much longer than for unoperated animals (mean 22 sec), but subsequently the collicular rats showed a pattern of head-dipping that was similar (although not identical) to that of the control rats. It appears that rats with lesions of the superior colliculus are not permanently prevented from exploring the hole-board by inability to produce the required response, but rather that they may have difficulty in discovering certain features of novel environments.

  5. Assessment of performing an MST strike in Tank 21H

    Energy Technology Data Exchange (ETDEWEB)

    Poirier, Michael R.


    Previous Savannah River National Laboratory (SRNL) tank mixing studies performed for the Small Column Ion Exchange (SCIX) project have shown that 3 Submersible Mixer Pumps (SMPs) installed in Tank 41 are sufficient to support actinide removal by MST sorption as well as subsequent resuspension and removal of settled solids. Savannah River Remediation (SRR) is pursuing MST addition into Tank 21 as part of the Large Tank Strike (LTS) project. The preliminary scope for LTS involves the use of three standard slurry pumps (installed in N, SE, and SW risers) in a Type IV tank. Due to the differences in tank size, internal interferences, and pump design, a separate mixing evaluation is required to determine if the proposed configuration will allow for MST suspension and strontium and actinide sorption. The author performed the analysis by reviewing drawings for Tank 21 [W231023] and determining the required cleaning radius or zone of influence for the pumps. This requirement was compared with previous pilot-scale MST suspension data collected for SCIX that determined the cleaning radius, or zone of influence, as a function of pump operating parameters. The author also reviewed a previous Tank 50 mixing analysis that examined the ability of standard slurry pumps to suspend sludge particles. Based on a review of the pilot-scale SCIX mixing tests and Tank 50 pump operating experience, three standard slurry pumps should be able to suspend sludge and MST to effectively sorb strontium and actinides onto the MST. Using the SCIX data requires an assumption about the impact of cooling coils on slurry pump mixing. The basis for this assumption is described in this report. Using the Tank 50 operating experience shows three standard slurry pumps should be able to suspend solids if the shear strength of the settled solids is less than 160 Pa. Because Tank 21 does not contain cooling coils, the shear strength could be larger.

  6. Positive Emotions Associated with "Counter-Strike" Game Playing. (United States)

    Shin, Mirim; Heard, Rob; Suo, Chao; Chow, Chin Moi


    Digital game playing engages people for long periods of time. The pleasure offered by digital games may explain the players' consumption of this activity. Games may elicit both positive and negative emotions, which can be measured by encephalography (EEG). The EEG alpha asymmetry index (AI) is different in positive and negative emotions and so may be used to distinguish positive from negative emotions that occur during gaming. We hypothesized that the "Counter-Strike" (CS) game (Valve Software, Bellevue, WA) is pleasurable and demonstrable with a positive EEG AI. Twelve male participants ages 18-30 years underwent EEG recordings continuously during and postgame. EEG was also recorded pregame for control conditions of baseline (sitting on a chair staring at a blank wall), movement (moving fingers on the computer keyboard with a blank screen), sound (listening to the sound of the CS game with a blank screen), and screen (watching the CS game without playing). Self-ratings of emotional responses were completed at pre-, during, and postgame. A significant decrease in the EEG AI was observed under the screen condition compared with baseline, whereas an increase was observed postgame compared with the screen condition. The participants demonstrated a positive EEG AI following the "shoot" events (shoot opponents) and negative emotions after the "being shot" events. Subjective ratings of emotional response indicated happiness during and postgame, but anger and arousal were reported only during the game. The overall results are consistent with the hypothesis that predominantly positive emotional reactions are elicited from playing the CS game and concur with positive subjective ratings of happiness. Future studies may explore the relationship of game pleasure and obsessive game play.

  7. Research and development on procedures to stabilize acaricides in livestock dips. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)


    Ticks and mites are serious ectoparasites of livestock in many countries. As vectors of animal diseases they pose a threat to livestock production. Traditionally, different types of acaricides are used to control them. One of the most commonly used tick control techniques is to force animals to walk through an acaricide suspension in a trough or Cattle Dip. Dipping is quite effective as the entire body of the animal gets treated with the acaricide. However, with increased usage the concentration of the acaricide in the 'dip' declines due to removal by the animal and degradation by biological and chemicals processes. The dissipation of the acaricide results in loss of efficacy of the 'dip', and may also enhance the development of resistance by the ectoparasites to the acaricides. Maintenance of an effective concentration, by periodic recharge or stabilization of the acaricide, is essential to assure efficient and cost-effective control and to minimize chances of resistance to develop. In 1990, the FAO/IAEA Joint Division, recognizing the need for co-ordinated research on studying the dissipation of acaricides in cattle dips and developing procedures to stabilize them, established a 5-year Co-ordinated Research Programme on Development of Procedures to Stabilize Acaricides in Livestock Dips and of Simplified Methods to Measure Their Concentration, Using Nuclear Techniques. In initiating this programme, the Joint Division recognized that major gaps exist in the knowledge in this area which, if filled, would greatly aid developing countries in their effort to more effectively use acaricides to protect animal health. This TECDOC reports the accomplishments of this programme

  8. Canine renal cortical necrosis and haemorrhage following ingestion of an Amitraz-formulated insecticide dip : clinical communication

    Directory of Open Access Journals (Sweden)

    P.A. Oglesby


    Full Text Available Amitraz is a formamidine compound used in veterinary medicine as a topical dip to control ticks and mites on dogs and livestock. A 10-year-old female Scottish terrier was presented following the accidental oral administration of a dip containing amitraz. This case report describes the clinical signs, treatment and pathology of this dog. Clinical signs of toxicity from amitraz result from stimulation of alpha2-adrenergic receptors. Amitraz is seldom fatal because the effects can be reversed by alpha2-adrenergic antagonists. The dog recovered from the amitraz toxicity but died 5 days later from acute renal failure.

  9. Pre/post-strike atmospheric assessment system (PAAS)

    International Nuclear Information System (INIS)

    Peglow, S. G.; Molitoris, J. D.


    The Pre/Post-Strike Atmospheric Assessment System was proposed to show the importance of local meteorological conditions in the vicinity of a site suspected of storing or producing toxic agents and demonstrate a technology to measure these conditions, specifically wind fields. The ability to predict the collateral effects resulting from an attack on a facility containing hazardous materials is crucial to conducting effective military operations. Our study approach utilized a combination of field measurements with dispersion modeling to better understand which variables in terrain and weather were most important to collateral damage predictions. To develop the PAAS wind-sensing technology, we utilized a combination of emergent and available technology from micro-Doppler and highly coherent laser systems. The method used for wind sensing is to probe the atmosphere with a highly coherent laser beam. As the beam probes, light is back-scattered from particles entrained in the air to the lidar transceiver and detected by the instrument. Any motion of the aerosols with a component along the beam axis leads to a Doppler shift of the received light. Scanning in a conical fashion about the zenith results in a more accurate and two-dimensional measurement of the wind velocity. The major milestones in the benchtop system development were to verify the design by demonstrating the technique in the laboratory, then scale the design down to a size consistent with a demonstrator unit which could be built to take data in the field. The micro-Doppler heterodyne system we developed determines absolute motion by optically mixing a reference beam with the return signal and has shown motion sensitivity to better than 1 cm/s. This report describes the rationale, technical approach and laboratory testing undertaken to demonstrate the feasibility and utility of a system to provide local meteorological data and predict atmospheric particulate motion. The work described herein was funded by

  10. The balancing act between the constitutional right to strike and the ...

    African Journals Online (AJOL)

    While the South African Constitution enshrines both children's right to a basic education and teachers' right to strike, conflict between these two often occurs when the way in which teachers' unions conduct strike actions detracts from learners' education. This article identifies the parties affected by industrial action in the ...

  11. Expert Anticipatory Skill in Striking Sports: A Review and a Model (United States)

    Muller, Sean; Abernethy, Bruce


    Expert performers in striking sports can hit objects moving at high speed with incredible precision. Exceptionally well developed anticipation skills are necessary to cope with the severe constraints on interception. In this paper, we provide a review of the empirical evidence regarding expert interception in striking sports and propose a…

  12. Factors affecting defensive strike behavior in Brown Treesnakes (Boiga irregularis) provoked by humans (United States)

    Spencer, McKayka M.; Lardner, Bjorn; Mazurek, M.J.; Reed, Robert N.


    Striking is a typical antipredator defense exhibited by many species of snakes. While trapping Brown Treesnakes (Boiga irregularis) on Guam, we observed that snakes most frequently struck at an approaching person at a site where snakes had been trapped, marked, and handled in the past. Using a combination of between-sites and within-site comparisons, we assessed if the propensity to strike was correlated with capture histories (both recent and long-term), snake size, body condition (a proxy to nutritional stress), sex, or tail condition (broken or intact), while controlling for confounding variables. We confirmed that propensity to strike was higher at the site where we had been conducting capture-mark-recapture for several years. However, we were unable to demonstrate a correlation between striking tendencies and individual recent or long-term capture histories. The only morphological covariate that had an effect on strike propensity was sex, with females striking more often than males. After removing the site effect from our model, we found that snakes missing parts of their tails were more likely to strike than snakes with intact tails. We have yet to identify the factor(s) that cause the pronounced difference across sites in snake propensity to strike, and data from additional sites might help elucidate any geographical patterns.

  13. The dark side of solidarity: social norms and social relations in the aftermath of strikes

    NARCIS (Netherlands)

    Thommes, Kirsten; Akkerman, Agnes; Torenvlied, René; Born, Marieke


    This paper studies how employees anticipate change in social relations after a strike in their organisation. We hypothesise that two group norms affect employees' fear that a strike deteriorates the social relations with their colleagues. We distinguish between two different norms associated with a

  14. The dark side of solidarity. The impact of norms on the aftermath of strikes

    NARCIS (Netherlands)

    Thommes, K; Akkerman, A.; Torenvlied, R.


    This paper studies how employees anticipate change in social relations after a strike in their organisation. We hypothesise that two group norms affect employees' fear that a strike deteriorates the social relations with their colleagues. We distinguish between two different norms associated with a

  15. Variation in Foot Strike Patterns among Habitually Barefoot and Shod Runners in Kenya. (United States)

    Lieberman, Daniel E; Castillo, Eric R; Otarola-Castillo, Erik; Sang, Meshack K; Sigei, Timothy K; Ojiambo, Robert; Okutoyi, Paul; Pitsiladis, Yannis


    Runners are often categorized as forefoot, midfoot or rearfoot strikers, but how much and why do individuals vary in foot strike patterns when running on level terrain? This study used general linear mixed-effects models to explore both intra- and inter-individual variations in foot strike pattern among 48 Kalenjin-speaking participants from Kenya who varied in age, sex, body mass, height, running history, and habitual use of footwear. High speed video was used to measure lower extremity kinematics at ground contact in the sagittal plane while participants ran down 13 meter-long tracks with three variables independently controlled: speed, track stiffness, and step frequency. 72% of the habitually barefoot and 32% of the habitually shod participants used multiple strike types, with significantly higher levels of foot strike variation among individuals who ran less frequently and who used lower step frequencies. There was no effect of sex, age, height or weight on foot strike angle, but individuals were more likely to midfoot or forefoot strike when they ran on a stiff surface, had a high preferred stride frequency, were habitually barefoot, and had more experience running. It is hypothesized that strike type variation during running, including a more frequent use of forefoot and midfoot strikes, used to be greater before the introduction of cushioned shoes and paved surfaces.

  16. The Balancing Act between the Constitutional Right to Strike and the Constitutional Right to Education (United States)

    Deacon, H. J.


    While the South African Constitution enshrines both children's right to a basic education and teachers' right to strike, conflict between these two often occurs when the way in which teachers' unions conduct strike actions detracts from learners' education. This article identifies the parties affected by industrial action in the school context,…

  17. The Implications of Granting New Jersey Teachers the Right to Strike: A Public Policy Statement. (United States)

    Lisella, Carmine; Schwartz, Patricia

    Strikes are generally accepted as legitimate prerogatives of employees bargaining with employers in the private sector. Two broad questions must be answered when considering whether the right to strike should be granted public employees, including teachers. First, what are the distinctions between the public and private sectors that can reasonably…

  18. Are physicians' strikes ever morally justifiable? A call for a return to ...

    African Journals Online (AJOL)

    Though physicians strike provides an opportunity to generate more knowledge about the process in which legitimacy of an organization can be restored, it meets with a great deal of resistance not only by the public but from within the medical profession. This paper critically examines the legitimacy of strike by medical ...

  19. Major Burn Injury From Lightning Strike: A Case Report and Review ...

    African Journals Online (AJOL)

    BACKGROUND: Lightning has been viewed as a sign of the anger of the “gods” from Greek mythology. Among Yorubas, thunderstorm is regarded as anger from the god of thunder, “Sango” who could strike anybody anywhere to vent his anger at someone who has committed some form of atrocity. When lightning strikes, it ...

  20. Batter's Choice: Lessons for Teaching Tactics in a Modified Striking/Fielding Game (United States)

    Sinclair, Christina


    When played in their standard form, striking/fielding games are often a favorite among elementary students; yet they allow for only limited participation, which is contradictory to quality physical education. This article presents a sequence of lessons leading to Batter's Choice, a modified striking/fielding game, designed to maximize the…

  1. Strike type variation among Tarahumara Indians in minimal sandals versus conventional running shoes

    Directory of Open Access Journals (Sweden)

    Daniel E. Lieberman


    Conclusion: These data reinforce earlier studies that there is variation among foot strike patterns among minimally shod runners, but also support the hypothesis that foot stiffness and important aspects of running form, including foot strike, differ between runners who grow up using minimal versus modern, conventional footwear.

  2. A rapid assessment of species-specific bird strike risk at the Kotoka ...

    African Journals Online (AJOL)

    A rapid assessment of species-specific bird strike risk at the Kotoka International Airport in Accra, Ghana. ... We conclude that wildlife management to avert the risk of bird strikes could be successfully achieved by adopting both proactive and reactive measures to reduce the presence of problem species at the aerodrome.

  3. Lightning Strikes and Thunder Claps: The Strategic Bomber and Air Superiority (United States)


    Views November–December 2012 Air & Space Power Journal | 137 Lightning Strikes and Thunder Claps The Strategic Bomber and Air Superiority Maj Wade S...2012 to 00-00-2012 4. TITLE AND SUBTITLE Lightning Strikes and Thunder Claps: The Strategic Bomber and Air Superiority 5a. CONTRACT NUMBER 5b

  4. Variation in Foot Strike Patterns among Habitually Barefoot and Shod Runners in Kenya.

    Directory of Open Access Journals (Sweden)

    Daniel E Lieberman

    Full Text Available Runners are often categorized as forefoot, midfoot or rearfoot strikers, but how much and why do individuals vary in foot strike patterns when running on level terrain? This study used general linear mixed-effects models to explore both intra- and inter-individual variations in foot strike pattern among 48 Kalenjin-speaking participants from Kenya who varied in age, sex, body mass, height, running history, and habitual use of footwear. High speed video was used to measure lower extremity kinematics at ground contact in the sagittal plane while participants ran down 13 meter-long tracks with three variables independently controlled: speed, track stiffness, and step frequency. 72% of the habitually barefoot and 32% of the habitually shod participants used multiple strike types, with significantly higher levels of foot strike variation among individuals who ran less frequently and who used lower step frequencies. There was no effect of sex, age, height or weight on foot strike angle, but individuals were more likely to midfoot or forefoot strike when they ran on a stiff surface, had a high preferred stride frequency, were habitually barefoot, and had more experience running. It is hypothesized that strike type variation during running, including a more frequent use of forefoot and midfoot strikes, used to be greater before the introduction of cushioned shoes and paved surfaces.

  5. Labor Conflict on the National Stage: Metaphoric Lenses in Israel's Teachers' Strike (United States)

    Shenkar, Miriam; Shenkar, Oded


    Teachers often embed their labor demands within a broader context to claim high moral ground and build community support. We analyze a recent teachers' strike in Israel, looking at how the strike played out in a country where the challenges of globalization collided with a socialist legacy in the face of an existential threat. The analysis reveals…

  6. Dip-Pen Nanolithography on (Bio)Reactive Monolayer and Block-Copolymer Platforms: Deposition of Lines of Single Macromolecules

    NARCIS (Netherlands)

    Salazar, Ramon B.; Shovsky, A.; Schönherr, Holger; Vancso, Gyula J.


    The application of atomic force microscopy (AFM) tip-mediated molecular transfer (dip-pen nanolithography or DPN) to fabricate nanopatterned (bio)reactive platforms based on dendrimers on reactive self-assembled monolayer (SAM) and polymer thin films is discussed. The transfer of high-molar-mass

  7. Evaluation of DipStreak containing CNA-MacConkey agar: a new bedside urine culture device. (United States)

    Colodner, R; Keness, Y


    Many bedside urine culture devices have been developed with the aim of reliability, simplicity and use in both the physician's office and the clinical laboratory. To compare a novel bedside urine culture device (DipStreak, Novamed Ltd., Israel) comprising a combination of MacConkey and Columbia CNA blood agar with conventional seeding on the same culture media. A total of 1,000 urine specimens sent to our microbiology laboratory were simultaneously processed by both methods. Results were evaluated after 24 and 48 hours incubation at 37 degrees C. Altogether, 171 (17.1%) and 124 (12.4%) specimens were defined as positive by the conventional method using cutoff values of 10(4) colony-forming units/ml and 10(5) CFU/ml respectively; 178 specimens (17.8%) were defined as contaminated. The sensitivity, specificity, positive and negative predictive values of DipStreak for urinary tract infection were 98.8%, 98.6%, 96% and 99.6% respectively, using a cutoff value of 10(4) CFU/ml, and 99.3%, 99.2%, 96% and 99.8% respectively, using cutoff value of 10(5) CFU/ml. Full agreement between both techniques was 95%. The agreement rate between DipStreak and conventional seeding was remarkably high. These results suggest that DipStreak in the agar combination tested in this study is a useful and precise tool for diagnosing urinary tract infections.

  8. Dips and peaks in fluorescence yield X-ray absorption are due to state-dependent decay

    NARCIS (Netherlands)

    de Groot, F.M.F.


    In a 2010 paper Aziz, Chergui and colleagues observe fluorescence yield (FY) detected X-ray absorption spectra that are concentration-dependent and show both dips and peaks. In this comment I will show that all observed spectral features are a consequence of the relative ratio of background and edge

  9. Effect of Dipping and Vacuum Impregnation Coating Techniques with Alginate Based Coating on Physical Quality Parameters of Cantaloupe Melon. (United States)

    Senturk Parreidt, Tugce; Schmid, Markus; Müller, Kajetan


    Edible coating based on sodium alginate solution was applied to fresh-cut cantaloupe melon by dipping and vacuum impregnation coating methods. One aim of this work is to produce more technical information concerning these conventional and novel coating processes. For this purpose, the effect of various coating parameters (dipping time, draining time, time length of the vacuum period, vacuum pressure, atmospheric restoration time) with several levels on physical quality parameters (percentage of weight gain, color, and texture) of noncoated and coated samples were determined in order to define adequate coating process parameters to achieve a successful coating application. Additionally, the effects of dipping and vacuum impregnation processes were compared. Both processes improved the firmness of the melon pieces. However, vacuum impregnation application had higher firmness and weight gain results, and had significant effect (P coating technique and the parameters used significantly affect the physical quality characteristics of coated food products. The work presented produced more technical information concerning dipping and vacuum impregnation coating techniques, along with evaluating the effects of various coating parameters with several levels. The results revealed that vacuum impregnation technique is a successful coating method; however the effects should be carefully assessed for each product. © 2018 Institute of Food Technologists®.

  10. Developing personal values: trainees' attitudes toward strikes by health care providers. (United States)

    Li, Su-Ting T; Srinivasan, Malathi; Der-Martirosian, Claudia; Kravitz, Richard L; Wilkes, Michael S


    Worldwide, health care providers use strikes and job actions to influence policy. For health care providers, especially physicians, strikes create an ethical tension between an obligation to care for current patients (e.g., to provide care and avoid abandonment) and an obligation to better care for future patients by seeking system improvements (e.g., improvements in safety, to access, and in the composition and strength of the health care workforce). This tension is further intensified when the potential benefit of a strike involves professional self-interest and the potential risk involves patient harm or death. By definition, trainees are still forming their professional identities and values, including their opinions on fair wages, health policy, employee benefits, professionalism, and strikes. In this article, the authors explore these ethical tensions, beginning with a discussion of reactions to a potential 2005 nursing strike at the University of California, Davis, Medical Center. The authors then propose a conceptual model describing factors that may influence health care providers' decisions to strike (including personal ethics, personal agency, and strike-related context). In particular, the authors explore the relationship between training level and attitudes toward taking a job action, such as going on strike. Because trainees' attitudes toward strikes continue to evolve during training, the authors maintain that open discussion around the ethics of health care professionals' strikes and other methods of conflict resolution should be included in medical education to enhance professionalism and systems-based practice training. The authors include sample case vignettes to help initiate these important discussions. Copyright © by the Association of American medical Colleges.

  11. Effect of confinement on bond strength of hot-dip galvanized lap splices in concrete structures

    International Nuclear Information System (INIS)

    Fakhran, Mazen


    Galvanizing the reinforcing steel is one of the methods used to protect bars against corrosion. Galvanizing is a hot dip process where the reinforcing bars are immersed in an aqueous pre flux solution of zinc ammonium chloride at a controlled temperature between 840 and 850 degrees F. In 2001, a research program was started at AUB to evaluate experimentally the effect of hot dip galvanizing on the bond capacity of tension lap splices anchored in full-scale beam specimens designed to fail in bond splitting mode. The test results indicated that the use of galvanized bars had a negligible effect on bond strength of reinforcement in normal strength. However, galvanizing caused an average of 20 percent decrease in bond strength of reinforcement in high strength concrete. The primary objective of research reported in this thesis, is the need to find a solution to eliminate the bond reduction of galvanized bars in high strength concrete. It is significant to evaluate the positive effect of the addition of transverse reinforcement in the splice region. The hypothesis to be tested is that such transverse reinforcement will insure uniform bond stress distribution over the entire splice region, thus mobilizing all bar lugs along the splice in the stress transfer mechanism between the bar and the surrounding concrete. Such mechanism might reduce the significant decrease in bond strength in high strength concrete due to galvanizing. To achieve this objective, eighteen full-scale beam specimens were tested in positive bending. Each beam was reinforced with bars spliced in a constant moment region at midspam. The splice length was chosen in such a way that the beams failed in bond splitting of the concrete cover in the splice region. The main variables were type of coating (black or galvanized bars), bar size (20, 25 and 32 mm), and amount of transverse reinforcement in the splice region (0, 2 or 4 stirrups). The test results indicated that confinement did not have a significant

  12. Observation of variable pre-eclipse dips and disk winds in the eclipsing LMXB XTE J1710-281 (United States)

    Raman, Gayathri; Maitra, Chandreyee; Paul, Biswajit


    We report the first detection of highly ionized Fe species in the X-ray spectrum of the eclipsing and dipping Low Mass X-ray Binary XTE J1710-281. Using archival Chandra and Suzaku observations, we have carried out a spectro-timing analysis of the source during three different epochs. We compare the average orbital profile and obtain differences in pre-eclipse dip morphologies between different observation epochs. We observe an orbit to orbit evolution of the dips for the first time in this source in both the Chandra observations, reflecting changes in the structure of the accretion disc in timescales of hours. We further perform intensity resolved spectroscopy for both the Chandra and the Suzaku data to characterize the changes in the spectral parameters from the persistent to the dipping intervals. We find that the absorbers responsible for the dips, can be best described using a partially ionized partial covering absorber, with an ionization parameter, log(ξ) of ˜2. The photon index of the source remained at ˜2 during both the Chandra and the Suzaku observations. In the 0.6-9 keV Suzaku spectra, we detect a broad 0.72 keV Fe L-alpha emission line complex and two narrow absorption lines at ˜6.60 keV and ˜7.01 keV. The highly ionized Fe line signatures, being an indicator of accretion disc-winds, has been observed for the first time in XTE J1710-281.

  13. Polyimide Dielectric Layer on Filaments for Organic Field Effect Transistors: Choice of Solvent, Solution Composition and Dip-Coating Speed

    Directory of Open Access Journals (Sweden)

    Rambausek Lina


    Full Text Available In today’s research, smart textiles is an established topic in both electronics and the textile fields. The concept of producing microelectronics directly on a textile substrate is not a mere idea anymore and several research institutes are working on its realisation. Microelectronics like organic field effect transistor (OFET can be manufactured with a layered architecture. The production techniques used for this purpose can also be applied on textile substrates. Besides gate, active and contact layers, the isolating or dielectric layer is of high importance in the OFET architecture. Therefore, generating a high quality dielectric layer that is of low roughness and insulating at the same time is one of the fundamental requirements in building microelectronics on textile surfaces. To evaluate its potential, we have studied polyimide as a dielectric layer, dip-coated onto copper-coated polyester filaments. Accordingly, the copper-coated polyester filament was dip-coated from a polyimide solution with two different solvents, 1-methyl-2-pyrrolidone (NMP and dimethylformaldehyde. A variety of dip-coating speeds, solution concentrations and solvent-solute combinations have been tested. Their effect on the quality of the layer was analysed through microscopy, leak current measurements and atomic force microscopy (AFM. Polyimide dip-coating with polyimide resin dissolved in NMP at a concentration of 15w% in combination with a dip-coating speed of 50 mm/min led to the best results in electrical insulation and roughness. By optimising the dielectric layer’s properties, the way is paved for applying the subsequent semi-conductive layer. In further research, we will be working with the organic semiconductor material TIPS-Pentacene

  14. A diffusive ink transport model for lipid dip-pen nanolithography. (United States)

    Urtizberea, A; Hirtz, M


    Despite diverse applications, phospholipid membrane stacks generated by dip-pen nanolithography (DPN) still lack a thorough and systematic characterization that elucidates the whole ink transport process from writing to surface spreading, with the aim of better controlling the resulting feature size and resolution. We report a quantitative analysis and modeling of the dependence of lipid DPN features (area, height and volume) on dwell time and relative humidity. The ink flow rate increases with humidity in agreement with meniscus size growth, determining the overall feature size. The observed time dependence indicates the existence of a balance between surface spreading and the ink flow rate that promotes differences in concentration at the meniscus/substrate interface. Feature shape is controlled by the substrate surface energy. The results are analyzed within a modified model for the ink transport of diffusive inks. At any humidity the dependence of the area spread on the dwell time shows two diffusion regimes: at short dwell times growth is controlled by meniscus diffusion while at long dwell times surface diffusion governs the process. The critical point for the switch of regime depends on the humidity.

  15. Nanomechanical properties of dip coated indium tin oxide films on glass

    International Nuclear Information System (INIS)

    Biswas, Nilormi; Ghosh, Priyanka; Sarkar, Saswati; Moitra, Debabrata; Biswas, Prasanta Kumar; Jana, Sunirmal; Mukhopadhyay, Anoop Kumar


    Nanomechanical properties of indium tin oxide (ITO) thin films dip coated from precursor sols of varying equivalent oxide weight percentage (wt.%) onto commercial soda lime silica (SLS) glass substrate were evaluated by nanoindentation technique at an ultralow load of 50 μN. It was found that the increase in wt.% beyond 6 in the precursor sols, had an adverse effect on nanohardness and Young's modulus of the films. Moreover, relatively thicker triple layered film (about 240 nm) had inferior nanomechanical properties as compared to the single layered film. Interestingly, the ITO foam coating on SLS glass substrate had nanomechanical properties nearly as good as those of the single layered films. These observations are explained in terms of the relative differences in crystallinity, stiffness and elastic deformation ability of the films. - Highlights: • Sol–gel indium tin oxide thin films and foam coating • Crystallinity and nanomechanical property inversely relate to sol oxide content. • Foam coating behaves like the thin films

  16. Voltage dip caused by the sequential energization of wind turbine transformers

    DEFF Research Database (Denmark)

    Arana Aristi, Iván; Holbøll, Joachim; Sørensen, T.


    THIS paper presents the results from electromagnetic transient (emt) simulations using PSCAD, where the model of Nysted Offshore Wind Farm (NOWF) was created to simulate the voltage dips due to wind turbine transformer energization. Four different sequences energizing different numbers of wind....../90/90 MVA, 132/33/33 kV) on the offshore platform next to the wind farm. The connection to the 132 kV grid is by a 10.5 km submarine cable and a 18.3 km land cable. Each of the 8 radials has 9 turbines, interconnected with 36 kV cables of 505 m length. The submarine cable is connected at the bottom of each...... turbine. The step up transformer (2,5 MVA, 33/0.69 kV) in every turbine is connected via a switch-disconnector and fuse on the MV-side. The grid codes are defined by the Transmission System Operator of each country, and some of them are not updated to regulate correctly the operation of large wind power...

  17. Mössbauer and XRD study of hot dip galvanized alloy

    Energy Technology Data Exchange (ETDEWEB)

    Kuzmann, E., E-mail: [Eötvös Loránd University, Institute of Chemistry (Hungary); Speakman, R.; El-Sharif, M. [Glasgow Caledonian University (United Kingdom); Stichleutner, S.; Homonnay, Z. [Eötvös Loránd University, Institute of Chemistry (Hungary); Klencsár, Z. [Research Centre for Natural Sciences, HAS, Institute of Materials and Environmental Chemistry (Hungary); Sziráki, L. [Eötvös Loránd University, Institute of Chemistry (Hungary); Chisholm, C. U.; Lak, Gy. B. [Glasgow Caledonian University (United Kingdom)


    Mössbauer spectroscopy has been used to investigate the nature of the Zinc-Iron alloys present within the Hot Dip Galvanized (HDG) layers of steel with a silicon content of 0.35 %. The investigation also studied the impact of the powder coating pretreatment on the nature of the alloy layers. The acid etching process within the pretreatment process in particular would be expected to have a significant impact on the HDG layer. This study utilized {sup 57}Fe Mössbauer spectroscopy to examine identically processed samples prior to and post pre treatment. XRD and {sup 57}Fe CEMS measurements were performed on hot galvanized S355J2 + N samples, forming sandwiched structure. Both XRD and CEMS reveal the presence of dominant steel phase in accordance with its estimated occurrence on the surface of the sandwiched samples. Minor Γ-Fe3Zn10, ζ-FeZn15 and solid solution Fe-Zn as well as minor Fe-Si phases could also be identified.

  18. Coexisting Flux Rope and Dipped Arcade Sections Along One Solar Filament (United States)

    Guo, Y.; Schmieder, B.; Démoulin, P.; Wiegelmann, T.; Aulanier, G.; Török, T.; Bommier, V.


    We compute the three-dimensional magnetic field of an active region in order to study the magnetic configuration of active region filaments. The nonlinear force-free field model is adopted to compute the magnetic field above the photosphere, where the vector magnetic field was observed by THEMIS/MTR on 2005 May 27. We propose a new method to remove the 180° ambiguity of the transverse field. Next, we analyze the implications of the preprocessing of the data by minimizing the total force and torque in the observed vector fields. This step provides a consistent bottom boundary condition for the nonlinear force-free field model. Then, using the optimization method to compute the coronal field, we find a magnetic flux rope along the polarity inversion line. The magnetic flux rope aligns well with part of an Hα filament, while the total distribution of the magnetic dips coincides with the whole Hα filament. This implies that the magnetic field structure in one section of the filament is a flux rope, while the other is a sheared arcade. The arcade induced a left-bearing filament in the magnetic field of negative helicity, which is opposite to the chirality of barbs that a flux rope would induce in a magnetic field of the same helicity sign. The field strength in the center of the flux rope is about 700 G, and the twist of the field lines is ~1.4 turns.

  19. Evaluation of surface characteristics under fretting of electrical contacts: Removal behaviour of hot dipped tin coating

    International Nuclear Information System (INIS)

    Park, Young Woo; Ramesh Bapu, G.N.K.; Lee, Kang Yong


    The fretting corrosion behaviour of hot dipped tin coating is investigated at low fretting cycles at ±25 μm displacement amplitude, 0.5N normal load, 3 Hz frequency, 45-50% relative humidity, and 25 ± 1 deg. C temperature. The typical characteristics of the change in contact resistance with fretting cycles are explained. The fretted surface is examined using laser scanning microscope, scanning electron microscope and energy dispersive X-ray analysis to assess the surface profile, extent of fretting damage, extent of oxidation and elemental distribution across the contact zone. The interdependence of extent of wear and oxidation increases the complexity of the fretting corrosion behaviour of tin coating. The variation of contact resistance clearly revealed the fretting of tin coating from 50 to 1200 cycles and the fretting of the substrate above 1200 cycles. The observed low and stable contact resistance region and the fluctuating resistance region at various fretting cycles are explained and substantiated with Scanning electron microscopy (SEM), laser scanning microscope (LSM) and energy dispersive analysis of X-rays (EDAX) analysis results of the fretted surface.

  20. Effects of smokeless dipping tobacco (Naswar) consumption on antioxidant enzymes and lipid profile in its users. (United States)

    Sajid, Faiza; Bano, Samina


    Dipping tobacco, traditionally referred to as moist snuff, is a type of finely ground, moistened smokeless tobacco product. Naswar is stuffed in the floor of the mouth under the lower lip, or inside the cheek, for extended periods of time. Tobacco use causes dyslipidemia and also induces oxidative stress, leading to alteration in levels of antioxidant enzymes. Dyslipidemia and oxidative stress in turn play a vital role in the development of cardiovascular disease (CVD). Studies conducted on smokeless tobacco products reveal contradictory findings regarding its effects on lipid profile and antioxidant enzymes. As use of Naswar is quite common in Pakistan, the current study aimed to evaluate levels of the antioxidant enzymes viz glutathione per oxidase (GPx) and super oxide dismutase (SOD), alongside lipid profile parameters such as total cholesterol, triglycerides, High density lipoprotein cholesterol (HDL-C) and low density lipoprotein cholesterol (LDL-C) to assess the risk of adverse cardiovascular events in Naswar users.90 Healthy males aged 16-43 years, who consumed Naswar daily, were selected for the study, alongside 68 age-matched non-tobacco users as controls. Both GPx and SOD levels as well as serum HDL-C were significantly reduced (Pprofile and antioxidant enzymes thereby placing its consumers at an increased risk of cardiovascular disease.

  1. Evaluation of surface characteristics under fretting of electrical contacts: Removal behaviour of hot dipped tin coating

    Energy Technology Data Exchange (ETDEWEB)

    Park, Young Woo [Stainless Steel Research Group, Technical Research Laboratories, POSCO, Pohang 790-300 (Korea, Republic of); Ramesh Bapu, G.N.K. [Stress Analysis and Failure Design Laboratory, School of Mechanical Engineering, Yonsei University, 134, Sinchon-dong, Seodaemun-gu, Seoul 120-749 (Korea, Republic of); Lee, Kang Yong, E-mail: [Stress Analysis and Failure Design Laboratory, School of Mechanical Engineering, Yonsei University, 134, Sinchon-dong, Seodaemun-gu, Seoul 120-749 (Korea, Republic of)


    The fretting corrosion behaviour of hot dipped tin coating is investigated at low fretting cycles at {+-}25 {mu}m displacement amplitude, 0.5N normal load, 3 Hz frequency, 45-50% relative humidity, and 25 {+-} 1 deg. C temperature. The typical characteristics of the change in contact resistance with fretting cycles are explained. The fretted surface is examined using laser scanning microscope, scanning electron microscope and energy dispersive X-ray analysis to assess the surface profile, extent of fretting damage, extent of oxidation and elemental distribution across the contact zone. The interdependence of extent of wear and oxidation increases the complexity of the fretting corrosion behaviour of tin coating. The variation of contact resistance clearly revealed the fretting of tin coating from 50 to 1200 cycles and the fretting of the substrate above 1200 cycles. The observed low and stable contact resistance region and the fluctuating resistance region at various fretting cycles are explained and substantiated with Scanning electron microscopy (SEM), laser scanning microscope (LSM) and energy dispersive analysis of X-rays (EDAX) analysis results of the fretted surface.

  2. Formation of microstructural features in hot-dip aluminized AISI 321 stainless steel (United States)

    Huilgol, Prashant; Rajendra Udupa, K.; Udaya Bhat, K.


    Hot-dip aluminizing (HDA) is a proven surface coating technique for improving the oxidation and corrosion resistance of ferrous substrates. Although extensive studies on the HDA of plain carbon steels have been reported, studies on the HDA of stainless steels are limited. Because of the technological importance of stainless steels in high-temperature applications, studies of their microstructural development during HDA are needed. In the present investigation, the HDA of AISI 321 stainless steel was carried out in a pure Al bath. The microstructural features of the coating were studied using scanning electron microscopy and transmission electron microscopy. These studies revealed that the coating consists of two regions: an Al top coat and an aluminide layer at the interface between the steel and Al. The Al top coat was found to consist of intermetallic phases such as Al7Cr and Al3Fe dispersed in an Al matrix. Twinning was observed in both the Al7Cr and the Al3Fe phases. Furthermore, the aluminide layer comprised a mixture of nanocrystalline Fe2Al5, Al7Cr, and Al. Details of the microstructural features are presented, and their formation mechanisms are discussed.

  3. Fabrication and properties of zinc oxide thin film prepared by sol-gel dip coating method

    Directory of Open Access Journals (Sweden)

    Kayani Zohra Nazir


    Full Text Available ZnO thin films were deposited on a glass substrate by dip coating technique using a solution of zinc acetate, ethanol and distilled water. Optical constants, such as refractive index n and extinction coefficient k. were determined from transmittance spectrum in the ultraviolet-visible-near infrared (UV-Vis-NIR regions using envelope methods. The films were found to exhibit high transmittance, low absorbance and low reflectance in the visible regions. Absorption coefficient α and the thickness of the film t were calculated from interference of transmittance spectra. The direct optical band gap of the films was in the range of 3.98 to 3.54 eV and the thickness of the films was evaluated in the range of 173 to 323 nm, while the refractive index slightly varied in the range of 1.515 to 1.622 with an increase in withdrawal speed from 100 to 250 mm/s. The crystallographic structure of the films was analyzed with X-ray diffractometer. The films were amorphous in nature.

  4. Stepwise inertial control of a wind turbine generator to minimize a second frequency dip

    Directory of Open Access Journals (Sweden)

    Dejian Yang


    Full Text Available Wind turbine generators (WTGs in power systems with high wind penetration levels are encouraged or forced to participate in frequency control. A stepwise inertial control (SIC scheme instantly increases WTG output to arrest the frequency drop for a preset period upon detecting a disturbance. After arresting the frequency drop, the output is rapidly reduced to recover the rotor speed. The reduction could cause a power deficit to the power system, which in turn results in a second frequency dip (SFD. This paper proposes an SIC scheme that can improve the frequency nadir (FN and maximum rate of change of frequency (ROCOF while minimizing an SFD. To achieve this, a reference function is separately defined prior to and after the FN. To improve the FN and maximum ROCOF, the output is instantly increased by adding a constant, which is proportional to the rotor speed, and maintaining it until the FN is reached. To minimize an SFD, the output is slowly reduced with the rotor speed. This reduction ensures a slow output reduction rate. The performance of the proposed scheme is investigated using an EMTP-RV simulator under different wind speeds and wind power penetration levels. Results clearly demonstrate that the proposed scheme can improve the FN and maximum ROCOF while ensuring a quick frequency recovery.

  5. Centrifuge model test of rock slope failure caused by seismic excitation. Plane failure of dip slope

    International Nuclear Information System (INIS)

    Ishimaru, Makoto; Kawai, Tadashi


    Recently, it is necessary to assess quantitatively seismic safety of critical facilities against the earthquake induced rock slope failure from the viewpoint of seismic PSA. Under these circumstances, it is essential to evaluate more accurately the possibilities of rock slope failure and the potential failure boundary, which are triggered by earthquake ground motions. The purpose of this study is to analyze dynamic failure characteristics of rock slopes by centrifuge model tests for verification and improvement of the analytical methods. We conducted a centrifuge model test using a dip slope model with discontinuities limitated by Teflon sheets. The centrifugal acceleration was 50G, and the acceleration amplitude of input sin waves increased gradually at every step. The test results were compared with safety factors of the stability analysis based on the limit equilibrium concept. Resultant conclusions are mainly as follows: (1) The slope model collapsed when it was excited by the sine wave of 400gal, which was converted to real field scale, (2) Artificial discontinuities were considerably concerned in the collapse, and the type of collapse was plane failure, (3) From response acceleration records observed at the slope model, we can say that tension cracks were generated near the top of the slope model during excitation, and that might be cause of the collapse, (4) By considering generation of the tension cracks in the stability analysis, correspondence of the analytical results and the experimental results improved. From the obtained results, we need to consider progressive failure in evaluating earthquake induced rock slope failure. (author)

  6. Fabrication of an Anisotropic Superhydrophobic Polymer Surface Using Compression Molding and Dip Coating

    Directory of Open Access Journals (Sweden)

    Kyong-Min Lee


    Full Text Available Many studies of anisotropic wetting surfaces with directional structures inspired from rice leaves, bamboo leaves, and butterfly wings have been carried out because of their unique liquid shape control and transportation. In this study, a precision mechanical cutting process, ultra-precision machining using a single crystal diamond tool, was used to fabricate a mold with microscale directional patterns of triangular cross-sectional shape for good moldability, and the patterns were duplicated on a flat thermoplastic polymer plate by compression molding for the mass production of an anisotropic wetting polymer surface. Anisotropic wetting was observed only with microscale patterns, but the sliding of water could not be achieved because of the pinning effect of the micro-structure. Therefore, an additional dip coating process with 1H, 1H, 2H, 2H-perfluorodecythricholosilanes, and TiO2 nanoparticles was applied for a small sliding angle with nanoscale patterns and a low surface energy. The anisotropic superhydrophobic surface was fabricated and the surface morphology and anisotropic wetting behaviors were investigated. The suggested fabrication method can be used to mass produce an anisotropic superhydrophobic polymer surface, demonstrating the feasibility of liquid shape control and transportation.

  7. Adsorption of bovine serum albumin on amorphous carbon surfaces studied with dip pen nanolithography (United States)

    Yadav, Pradeep K.; McKavanagh, Fiona; Maguire, Paul D.; Lemoine, Patrick


    This article reports the use of dip pen nanolithography (DPN) for the study of adsorption of bovine serum albumin (BSA) proteins on amorphous carbon surfaces; tetrahedral amorphous carbon (t-aC) and silicon doped hydrogenated amorphous carbon (a-C:H:Si). Contact angle study shows that the BSA proteins reduce the contact angle on both carbon materials. We also noticed that the drop volume dependence is consistent with a negative line tension, i.e. due to an attractive protein/surface interaction. The DPN technique was used to write short-spaced (100 nm) BSA line patterns on both samples. We found a line merging effect, stronger in the case of the a-C:H:Si material. We discuss possible contributions from tip blunting, scratching, cross-talk between lever torsion and bending and nano-shaving of the patterns. We conclude that the observed effect is caused in large measure by the diffusion of BSA proteins on the amorphous carbon surfaces. This interpretation of the result is consistent with the contact angle data and AFM force curve analysis indicating larger tip/surface adhesion and spreading for the a-C:H:Si material. We conclude by discussing the advantages and limitations of DPN lithography to study biomolecular adsorption in nanoscale wetting environments.

  8. Morphological, structural and optical properties of ZnO thin films deposited by dip coating method

    Energy Technology Data Exchange (ETDEWEB)

    Marouf, Sara; Beniaiche, Abdelkrim; Guessas, Hocine, E-mail: [Laboratoire des Systemes Photoniques et Optiques Non Lineaires, Institut d' Optique et Mecanique de Precision, Universite Ferhat Abbas-Setif 1, Setif (Algeria); Azizi, Amor [Laboratoire de Chimie, Ingenierie Moleculaire et Nanostructures, Universite Ferhat Abbas-Setif 1, Setif (Algeria)


    Zinc oxide (ZnO) thin films were deposited on glass substrate by dip coating technique. The effects of sol aging time on the deposition of ZnO films was studied by using the field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and optical transmission techniques. The morphology of the films strongly depends on preparation route and deposition technique. It is noteworthy that films deposited from the freshly prepared solution feature indistinct characteristics; had relatively poor crystalline quality and low optical transmittance in the visible region. The increase in sol aging time resulted in a gradual improvement in crystallinity (in terms of peak sharpness and peak intensity) of the hexagonal phase for all diffraction peaks. Effect of sol aging on optical transparency is quite obvious through increased transmission with prolonged sol aging time. Interestingly, 72-168 h sol aging time was found to be optimal to achieve smooth surface morphology, good crystallinity and high optical transmittance which were attributed to an ideal stability of solution. These findings present a better-defined and more versatile procedure for production of clean ZnO sols of readily adjustable nanocrystalline size. (author)

  9. Large magnetoresistance dips and perfect spin-valley filter induced by topological phase transitions in silicene (United States)

    Prarokijjak, Worasak; Soodchomshom, Bumned


    Spin-valley transport and magnetoresistance are investigated in silicene-based N/TB/N/TB/N junction where N and TB are normal silicene and topological barriers. The topological phase transitions in TB's are controlled by electric, exchange fields and circularly polarized light. As a result, we find that by applying electric and exchange fields, four groups of spin-valley currents are perfectly filtered, directly induced by topological phase transitions. Control of currents, carried by single, double and triple channels of spin-valley electrons in silicene junction, may be achievable by adjusting magnitudes of electric, exchange fields and circularly polarized light. We may identify that the key factor behind the spin-valley current filtered at the transition points may be due to zero and non-zero Chern numbers. Electrons that are allowed to transport at the transition points must obey zero-Chern number which is equivalent to zero mass and zero-Berry's curvature, while electrons with non-zero Chern number are perfectly suppressed. Very large magnetoresistance dips are found directly induced by topological phase transition points. Our study also discusses the effect of spin-valley dependent Hall conductivity at the transition points on ballistic transport and reveals the potential of silicene as a topological material for spin-valleytronics.

  10. Crustal Density Variation Along the San Andreas Fault Controls Its Secondary Faults Distribution and Dip Direction (United States)

    Yang, H.; Moresi, L. N.


    The San Andreas fault forms a dominant component of the transform boundary between the Pacific and the North American plate. The density and strength of the complex accretionary margin is very heterogeneous. Based on the density structure of the lithosphere in the SW United States, we utilize the 3D finite element thermomechanical, viscoplastic model (Underworld2) to simulate deformation in the San Andreas Fault system. The purpose of the model is to examine the role of a big bend in the existing geometry. In particular, the big bend of the fault is an initial condition of in our model. We first test the strength of the fault by comparing the surface principle stresses from our numerical model with the in situ tectonic stress. The best fit model indicates the model with extremely weak fault (friction coefficient 200 kg/m3) than surrounding blocks. In contrast, the Mojave block is detected to find that it has lost its mafic lower crust by other geophysical surveys. Our model indicates strong strain localization at the jointer boundary between two blocks, which is an analogue for the Garlock fault. High density lower crust material of the Great Valley tends to under-thrust beneath the Transverse Range near the big bend. This motion is likely to rotate the fault plane from the initial vertical direction to dip to the southwest. For the straight section, north to the big bend, the fault is nearly vertical. The geometry of the fault plane is consistent with field observations.

  11. Greener corona discharge for enhanced wind generation with a simple dip-coated carbon nanotube decoration (United States)

    Wu, Yishan; Li, Jun; Ye, Jianchun; Chen, Xiaohong; Li, Huili; Huang, Sumei; Zhao, Ran; Ou-Yang, Wei


    Corona discharge-induced wind (CDIW) has been widely utilized in production lines in the food and semiconductor industries and in indoor devices such as electrostatic precipitators. Some ozone is inevitably emitted, posing serious health risks to respiratory system and lung function of a human being. In this work, a greener corona discharge with enhanced wind generation for a needle-to-cylinder discharge structure is demonstrated using a simple dip-coating method to attach carbon nanotubes (CNTs) to the discharge electrode of a stainless steel needle. Compared with a conventional discharge electrode without CNT decoration, the velocity of the CDIW is greatly enhanced, the onset voltage is lowered, the energy conversion efficiency is greatly improved and the concentration of generated ozone is much reduced, making this easy method of CNT decoration a promising candidate for greener corona discharge systems. In addition, several impact factors for improved performance are discussed mathematically and phenomenologically, providing an insight into the corona discharge and wind generation.

  12. Preparation of sustained release capsules by electrostatic dry powder coating, using traditional dip coating as reference. (United States)

    Yang, Yan; Shen, Lian; Yuan, Feng; Fu, Hui; Shan, Weiguang


    Lately, a great deal of attention is being paid to capsule coating, since the coat protects active pharmaceutical ingredients (APIs) from damage, as is in the case of tablet and pellet. However, moisture and heat sensitivity of gelatin shells make it challenging to coat capsules using the conventional aqueous coating techniques. In an effort to overcome this challenge, the present study aims to coat capsules using two different coating techniques: electrostatic dry powder coating (EDPC) and dip coating (DC). Both capsule coatings and free films were prepared by these two coating techniques, and the effects of coating formulations and processing conditions on the film quality were investigated. The corresponding drug in vitro release and mechanisms were characterized and compared. The results of dissolution tests demonstrated that the drug release behavior of both EDPC and DC coated capsules could be optimized to a sustained release of 24 hours, following the Fick's diffusion law. The results of this study suggest that EDPC method is better than DC method for coating capsules, with respect to the higher production efficiency and better stability, indicating that this dry coating technology has promised in gelatin capsule coating applications. Copyright © 2018. Published by Elsevier B.V.

  13. Synthesis of active absorber layer by dip-coating method for perovskite solar cell (United States)

    Singh, Rahul; Noor, I. M.; Singh, Pramod K.; Bhattacharya, B.; Arof, A. K.


    In this paper, we develop the hybrid perovskite-based n-i-p solar cell using a simple, fast and low-cost dip-coating method. Hot solution and the pre-annealed substrate are used for coating the perovskite thin film by this method this is further used for studying its structural and electrical properties. UV-vis spectroscopy is carried out for calculating the band gap of the hybrid perovskite layer which is ∼1.6 eV. X-ray spectroscopy confirms that the formation of hybrid perovskite layer. The profilometer is used to study the surface roughness and also for measuring the thickness of the perovskite layer with varying substrate temperature. The optimized sample was further used for cross-sectional SEM image to verify the thickness measured from the profiler. The electrical parameter of JV characteristic with varying temperature is tabulated in the table. Whereas, the perovskite sensitized solar cell exhibits highest short circuit current density, Jsc of 11 mA cm-2, open circuit voltage, Voc of 0.87 V, fill factor of 0.55 and efficiency, η of >5%.

  14. Structure of the la VELA Offshore Basin, Western Venezuela: AN Obliquely-Opening Rift Basin Within the South America-Caribbean Strike-Slip Plate Boundary (United States)

    Blanco, J. M.; Mann, P.


    Bathymetric, gravity and magnetic maps show that the east-west trend of the Cretaceous Great Arc of the Caribbean in the Leeward Antilles islands is transected by an en echelon series of obliquely-sheared rift basins that show right-lateral offsets ranging from 20 to 40 km. The basins are 75-100 km in length and 20-30 km in width and are composed of sub-parallel, oblique slip normal faults that define deep, bathymetric channels that bound the larger islands of the Leeward Antilles including Aruba, Curacao and Bonaire. A single basin of similar orientation and structure, the Urumaco basin, is present to the southwest in the Gulf of Venezuela. We mapped structures and sedimentation in the La Vela rift basin using a 3D seismic data volume recorded down to 6 seconds TWT. The basin can be mapped from the Falcon coast where it is correlative with the right-lateral Adicora fault mapped onshore, and its submarine extension. To the southeast of the 3D survey area, previous workers have mapped a 70-km-wide zone of northeast-striking, oblique, right-lateral faults, some with apparent right-lateral offsets of the coastline. On seismic data, the faults vary in dip from 45 to 60 degrees and exhibit maximum vertical offsets of 600 m. The La Vela and other obliquely-opening rifts accommodate right-lateral shear with linkages to intervening, east-west-striking right-lateral faults like the Adicora. The zone of oblique rifts is restricted to the trend of the Great Arc of the Caribbean and may reflect the susceptiblity of this granitic basement to active shearing. The age of onset for the basins known from previous studies on the Leeward Antilles is early Miocene. As most of these faults occur offshore their potential to generate damaging earthquakes in the densely populated Leeward Antilles is not known.

  15. Along-strike variations in extension from the Woodlark spreading center to mainland Papua New Guinea: New constraints from offshore seismic reflection and well data (United States)

    Fitz, G. G.; Mann, P.; Horton, B. K.


    Guy Fitz, Paul Mann, and Brian Horton, Jackson School of Geosciences, University of Texas at Austin, Austin, TX The D’Entrecasteaux Islands (DEI) of eastern Papua New Guinea are composed of high-grade metamorphic domes located within continental crust at the tip of the westward propagating Woodlark spreading ridge. Estimates from Euler pole rotation calculations require ~220 km of extension over ~6 Ma to uplift the DEI domes, the youngest, most recently uplifted metamorphic core complexes on Earth. However, analysis of multi-channel seismic data collected by the RV Maurice Ewing in 1992 and industry seismic data collected in 1974 from offshore basins flanking the DEI domes provides a much lower estimate of 78 + 12 km of upper crust brittle extension in a north-south transect 120 km west of the Woodlark rift area. The WNW alignment of the DEI demarcates two areas of contrasting deformational and depositional histories. In the area of the Kiribisi and Trobriand basins north of the DEI, normal faults occupy a WNW-striking basin of likely forearc origin that rifted in the early Miocene and continued to rift sporadically until the early Pliocene when all normal faults were buried by ~650 m of undeformed Plio-Pleistocene sediments. In Goodenough Basin to the south, the Pleistocene section is thicker and deformed by more recently active, WNW-striking normal faults with seafloor scarps and high-angle dips. The asymmetry of the Goodenough Pleistocene clastic fill near the Owen-Stanley fault along the southern coastline of the bay indicates that most normal motion has now shifted to this fault forming the southern edge of the Goodenough Bay. These seismic data provide no evidence for the OSFZ to be a low-angle normal fault capable of accommodating additional extension. Measurements of upper crust brittle extension in the area are compared to basin stretching factors determined from subsidence analysis and crustal thinning derived from gravity inversion.

  16. Collective Labor Disputes and Strikes in Russia: The Impact of Judicial Precedents and Enforcement

    Directory of Open Access Journals (Sweden)

    Elena Gerasimova


    Full Text Available The right to strike is recognized in the Constitution and the Labor Code of the Russian Federation as a means to resolve collective labor disputes. However, in Russia labor protests come up for discussion much more frequently than strikes. In recent years the number of labor protests in Russia, including various forms of work stoppage, has increased significantly compared to previous years, but the number of legally constituted collective labor disputes and strikes has remained very low. The legislation on resolution of collective labor disputes and mounting strikes is quite restrictive in Russia, and its enforcement also encourages employees to seek alternative ways to settle collective labor conflicts. There is little empirical research on the judicial implementation of these norms and its influence on the enforcement of legislation. Therefore, this paper analyses the reasoning of courts in cases on the legality of strikes, their interpretations of the law, and the impact these decisions have on the enforcement of the legislation on resolution of collective labor disputes and strikes. Our conclusion is that the courts act as another restrictive influence on the resolution of collective labor disputes and the exercise of the right to strike in Russia.

  17. A simple field method to identify foot strike pattern during running. (United States)

    Giandolini, Marlène; Poupard, Thibaut; Gimenez, Philippe; Horvais, Nicolas; Millet, Guillaume Y; Morin, Jean-Benoît; Samozino, Pierre


    Identifying foot strike patterns in running is an important issue for sport clinicians, coaches and footwear industrials. Current methods allow the monitoring of either many steps in laboratory conditions or only a few steps in the field. Because measuring running biomechanics during actual practice is critical, our purpose is to validate a method aiming at identifying foot strike patterns during continuous field measurements. Based on heel and metatarsal accelerations, this method requires two uniaxial accelerometers. The time between heel and metatarsal acceleration peaks (THM) was compared to the foot strike angle in the sagittal plane (αfoot) obtained by 2D video analysis for various conditions of speed, slope, footwear, foot strike and state of fatigue. Acceleration and kinematic measurements were performed at 1000Hz and 120Hz, respectively, during 2-min treadmill running bouts. Significant correlations were observed between THM and αfoot for 14 out of 15 conditions. The overall correlation coefficient was r=0.916 (Pfoot strike except for extreme forefoot strike during which the heel rarely or never strikes the ground, and for different footwears and states of fatigue. We proposed a classification based on THM: FFS<-5.49ms

  18. Gender frames and collective action: Configurations of masculinity in the Pittston Coal strike

    Energy Technology Data Exchange (ETDEWEB)

    Beckwith, K. [College Wooster, Wooster, OH (United States)


    This article develops the concept of gender frame for understanding major transformations in the collective action repertoires of social movements. Focusing on the United Mine Workers of America (UMWA) strike against the Pittston Coal Group (1989-90), the article discusses the UMWA's traditional collective action repertoire and its innovation of nonviolent protest, widely employed during the strike. Interviews with major activists and UMWA staff and officers illustrate how the UMWA employed a gender frame of mining masculinities to initiate the new nonviolent strike action. The article concludes by suggesting how collective action repertoires and framing are linked and encouraging future research on gender frames in social movements.

  19. A Study of Dip-Coatable, High-Capacitance Ion Gel Dielectrics for 3D EWOD Device Fabrication

    Directory of Open Access Journals (Sweden)

    Carlos E. Clement


    Full Text Available We present a dip-coatable, high-capacitance ion gel dielectric for scalable fabrication of three-dimensional (3D electrowetting-on-dielectric (EWOD devices such as an n × n liquid prism array. Due to the formation of a nanometer-thick electric double layer (EDL capacitor, an ion gel dielectric offers two to three orders higher specific capacitance (c ≈ 10 μF/cm2 than that of conventional dielectrics such as SiO2. However, the previous spin-coating method used for gel layer deposition poses several issues for 3D EWOD device fabrication, particularly when assembling multiple modules. Not only does the spin-coating process require multiple repetitions per module, but the ion gel layer also comes in risks of damage or contamination due to handling errors caused during assembly. In addition, it was observed that the chemical formulation previously used for the spin-coating method causes the surface defects on the dip-coated gel layers and thus leads to poor EWOD performance. In this paper, we alternatively propose a dip-coating method with modified gel solutions to obtain defect-free, functional ion gel layers without the issues arising from the spin-coating method for 3D device fabrication. A dip-coating approach offers a single-step coating solution with the benefits of simplicity, scalability, and high throughput for deposition of high-capacitance gel layers on non-planar EWOD devices. An ion gel solution was prepared by combining the [EMIM][TFSI] ionic liquid and the [P(VDF-HFP] copolymer at various wt % ratios in acetone solvent. Experimental studies were conducted to fully understand the effects of chemical composition ratios in the gel solution and how varying thicknesses of ion gel and Teflon layers affects EWOD performance. The effectiveness and potentiality of dip-coatable gel layers for 3D EWOD devices have been demonstrated through fabricating 5 × 1 arrayed liquid prisms using a single-step dip-coating method. Each prism module has

  20. Physics properties of TiO{sub 2} films produced by dip-coating technique; Propriedades fisicas de filmes de TiO{sub 2} produzidos pela tecnica de dip-coating

    Energy Technology Data Exchange (ETDEWEB)

    Teloeken, A.C.; Alves, A.K.; Berutti, F.A.; Tabarelli, A.; Bergmann, C.P., E-mail: [Universidade Federal do Rio Grande do Sul (UFRGS),RS (Brazil). Laboratorio de Materiais Ceramicos; Regonini, D.; Graule, T.; Clemens, F. [Swiss Federal Laboratories for Materials Testing and Research, Laboratory of High Performance Ceramics (Switzerland)


    The use of titanium dioxide (TiO{sub 2}) as a photocatalyst to produce hydrogen has been of great interest because of their chemical stability, low cost and non-toxicity. TiO{sub 2} occurs in three different crystal forms: rutile, anatase and brokita. Among these, the anatase phase generally exhibits the best photocatalytic behavior, while the rutile phase is the most stable. Among the various techniques of deposition, dip-coating technique produces films with good photocatalytic properties, using simple and inexpensive equipment. In this work TiO{sub 2} films were obtained by dip-coating. The films were characterized using X-ray diffraction, scanning electron microscopy, profilometry, contact angle measurements and photocurrent. The microstructure and physical properties were evaluated in relation of the temperature and the addition of an additive. (author)

  1. Functionalization of the Polymeric Surface with Bioceramic Nanoparticles via a Novel, Nonthermal Dip Coating Method. (United States)

    Riau, Andri K; Mondal, Debasish; Setiawan, Melina; Palaniappan, Alagappan; Yam, Gary H F; Liedberg, Bo; Venkatraman, Subbu S; Mehta, Jodhbir S


    The only nonthermal method of depositing a bioceramic-based coating on polymeric substrates is by incubation in liquid, e.g., simulated body fluid to form an apatite-like layer. The drawbacks of this method include the long processing time, the production of low scratch resistant coating, and an end product that does not resemble the intended bioceramic composition. Techniques, such as plasma spraying and magnetron sputtering, involving high processing temperature are unsuitable for polymers, e.g., PMMA. Here, we introduce a nonthermal coating method to immobilize hydroxyapatite (HAp) and TiO 2 nanoparticles on PMMA via a simple and fast dip coating method. Cavities that formed on the PMMA, induced by chloroform, appeared to trap the nanoparticles which accumulated to form layers of bioceramic coating only after 60 s. The resulting coating was hydrophilic and highly resistant to delamination. In the context of our research and to address the current clinical need, we demonstrate that the HAp-coated PMMA, which is intended to be used as a visual optic of a corneal prosthetic device, improves its bonding and biointegration with collagen, the main component of a corneal stroma. The HAp-coated PMMA resulted in better adhesion with the collagen than untreated PMMA in artificial tear fluid over 28 days. Human corneal stromal fibroblasts showed better attachment, viability, and proliferation rate on the HAp-coated PMMA than on untreated PMMA. This coating method is an innovative solution to immobilize various bioceramic nanoparticles on polymers and may be used in other biomedical implants.

  2. Suzaku View of the Neutron Star in the Dipping Source 4U 1822-37 (United States)

    Sasano, Makoto; Makishima, Kazuo; Sakurai, Soki; Zhang, Zhongli; Enoto, Teruaki


    The dipping X-ray source 4U 1822-37 was observed by Suzaku on 2006 Octrober 20 for a net exposure of 37 ks. The source was detected with the XIS at a 1-10 keV flux of 5.5 ×10(exp -10) erg per square centimeter per second, and with the HXD (HXD-PIN) at a 10-50 keV flux of 8.9 ×10(exp -10) erg per square centimeter per second. With HXD-PIN, the pulsation was detected at a barycentric period of 0.592437 seconds, and its change rate was reconfirmed as -2.43 × 10(exp -12) seconds per second. The 1-50 keV spectra of 4U 1822-37 were found to be very similar to those of Her X- 1 in the slopes, cutoff and iron lines. Three iron lines (Fe Kalpha, Fe XXV, and Fe XXVI) were detected, on top of a 1-50 keV continuum that is described by an NPEX model plus a soft blackbody. In addition, a cyclotron resonance scattering feature was detected significantly ( greater than 99% confidence), at an energy of 33+/-2 keV with a depth of 0.4(sup +0.6)/(sub -0.3). Therefore, the neutron star in this source is concluded to have a strong magnetic field of 2.8 × 10(exp 12) G. Further assuming that the source has a relatively high intrinsic luminosity of several times 10(exp 37) erg per second, its spectral and timing properties are consistently explained.

  3. Morning hypertension and night non-dipping in patients with diabetes and chronic kidney disease. (United States)

    Oh, Se Won; Han, Sang Youb; Han, Kum Hyun; Cha, Ran-hui; Kim, Sejoong; Yoon, Sun Ae; Rhu, Dong-Ryeol; Oh, Jieun; Lee, Eun Young; Kim, Dong Ki; Kim, Yon Su


    Morning hypertension (HTN) and nocturnal non-dipping (ND) are closely associated with target organ damage and cardiovascular events. However, their importance in diabetics with advanced renal disease is unclear. We evaluated the relationships of morning HTN and ND with estimated glomerular filtration rate (eGFR) and proteinuria, and determined the risk of morning HTN and ND according to presence of diabetes mellitus (DM) and chronic kidney disease (CKD) stage. A total of 1312 patients, including 439 with diabetes, were prospectively recruited at 21 centers in Korea. All patients had HTN and an eGFR of 15-89 ml min(-1) per 1.73 m(2). Ambulatory 24-h blood pressure was assessed. The rates of morning HTN (25.2% vs. 13.6%, Pmorning HTN only in non-diabetics (P=0.005). Proteinuria was related to ND in all patients (Pmorning HTN only in diabetics (P=0.001). In a regression analysis, the risk of morning HTN was 2.093 (95% confidence interval (95% CI): 1.070-4.094) for the DMCKD2 group, 1.634 (95% CI: 1.044-2.557) for the CKD3-4-only group and 2.236 (95% CI: 1.401-3.570) for the DMCKD3-4 group compared with the CKD2-only group. The risk of ND was high for stage 3-4 CKD: 1.581 (95% CI: 1.180-2.120) for non-diabetics and 1.842 (95% CI: 1.348-2.601) for diabetics. Diabetics showed higher rates of morning HTN, ND and uncontrolled sustained HTN compared with non-diabetics with CKD of the same stages.

  4. Development of Bioactive Ceramic Coating on Titanium Alloy substrate for Biomedical Application Using Dip Coating Method (United States)

    Asmawi, R.; Ibrahim, M. H. I.; Amin, A. M.; Mustafa, N.; Noranai, Z.


    Bioactive apatite, such as hydroxyapatite ceramic (HA), [Ca10(PO4)6(OH)2] has been extensively investigated for biomedical applications due to its excellent biocompatibility and tissue bioactivity properties. Its bioactivity provides direct bonding to the bone tissue. Because of its similarity in chemical composition to the inorganic matrix of bone, HA is widely used as implant materials for bone. Unfortunately, because of its poor mechanical properties,. this bioactive material is not suitable for load bearing applications. In this study, by the assistance of dip-coating technique, HA coatings were deposited on titanium alloy substrates by employing hydrothermal derived HA powder. The produced coatings then were oven-dried at 130°C for 1 hour and calcined at various temperature over the range of 200-800°C for 1 hour. XRD measurement showed that HA was the only phase present in the coatings. However coatings calcined at 800°C comprised a mixture of HA and tri-calcium phosphate (TCP). FTIR measurement showed the existence of hydroxyl, phosphate, and carbonate bands. PO4 - band became sharper and narrower with the increased of calcination temperature. FESEM observation showed that the coating is polycrystalline with individual particles of nano to submicron size and has an average particle size of 35 nm. The thickness of the coating are direcly propotional with the viscosity of coating slurry. It was shown that the more viscous coating slurry would produce a thicker ceramic coating. Mechanical properties of the coating were measured in term of adhesion strength using a Micro Materials Nano Test microscratch testing machine. The result revealed that the coating had a good adhesion to the titanium alloy substrate.

  5. An Exploratory Analysis of Littoral Combat Ships Ability to Protect Expeditionary Strike Groups

    National Research Council Canada - National Science Library

    Efimba, Motale


    ...) to augment or replace the current defenses of Expeditionary Strike Groups (ESG). Specifically, LCS's ability to help defend an ESGs in an anti-access scenario against a high-density small boat attack is simulated. Numbers of CRUDES...

  6. Expeditionary Strike Group: New Label, or New Concept - for Future Naval Warriors of America's Small Wars?

    National Research Council Canada - National Science Library

    Hancock, Daryl


    ... as, emergent contingency operations, and major theater wars. In the near future they will accomplish this mission while deployed around the globe under the new concept of Expeditionary Strike Groups (ESG...

  7. Three-dimensional impact kinetics with foot-strike manipulations during running

    Directory of Open Access Journals (Sweden)

    Andrew D. Nordin


    Conclusion: Loading rate–time assessment identified contrasting impact characteristics in each direction and the 3D resultant following foot-strike manipulations, with potential implications for lower extremity structures in running.

  8. Personality Characteristics of Pre/Post-Strike Air Traffic Control Applicants

    National Research Council Canada - National Science Library

    Schroeder, David


    ...) positions within the Federal Aviation Administration for more than 3 decades. This study was designed to assess the relationship between personality characteristics of a group of post-strike applicants (1984...

  9. Counterproliferation Strategy: The Role of Preventive War, Preventive Strikes, and Interdiction

    National Research Council Canada - National Science Library

    Rak, Claire


    This thesis analyzes the potential effectiveness of preventive war, preventive strikes, and interdiction as tools for the United States to counter the proliferation of weapons of mass destruction (WMD...

  10. Wildlife strike risk assessment in several Italian airports: lessons from BRI and a new methodology implementation.

    Directory of Open Access Journals (Sweden)

    Cecilia Soldatini

    Full Text Available The presence of wildlife in airport areas poses substantial hazards to aviation. Wildlife aircraft collisions (hereafter wildlife strikes cause losses in terms of human lives and direct monetary losses for the aviation industry. In recent years, wildlife strikes have increased in parallel with air traffic increase and species habituation to anthropic areas. In this paper, we used an ecological approach to wildlife strike risk assessment to eight Italian international airports. The main achievement is a site-specific analysis that avoids flattening wildlife strike events on a large scale while maintaining comparable airport risk assessments. This second version of the Birdstrike Risk Index (BRI2 is a sensitive tool that provides different time scale results allowing appropriate management planning. The methodology applied has been developed in accordance with the Italian Civil Aviation Authority, which recognizes it as a national standard implemented in the advisory circular ENAC APT-01B.

  11. Electrically conductive carbon fibre-reinforced composite for aircraft lightning strike protection (United States)

    Katunin, Andrzej; Krukiewicz, Katarzyna; Turczyn, Roman; Sul, Przemysław; Bilewicz, Marcin


    Aircraft elements, especially elements of exterior fuselage, are subjected to damage caused by lightning strikes. Due to the fact that these elements are manufactured from polymeric composites in modern aircraft, and thus, they cannot conduct electrical charges, the lightning strikes cause burnouts in composite structures. Therefore, the effective lightning strike protection for such structures is highly desired. The solution presented in this paper is based on application of organic conductive fillers in the form of intrinsically conducting polymers and carbon fabric in order to ensure electrical conductivity of whole composite and simultaneously retain superior mechanical properties. The presented studies cover synthesis and manufacturing of the electrically conductive composite as well as its characterization with respect to mechanical and electrical properties. The performed studies indicate that the proposed material can be potentially considered as a constructional material for aircraft industry, which characterizes by good operational properties and low cost of manufacturing with respect to current lightning strike protection materials solutions.

  12. Annotated Bibliography of Bird Hazards to Aircraft: Bird Strike Committee Citations 1967-1997

    National Research Council Canada - National Science Library

    Short, Jeffrey


    .... This annotated bibliography of bird hazards to aircraft, termed ABBHA, is a compilation of citations with abstracts on a wide range of related topics such as bird strike tolerance engineering, bird...

  13. Bird Strike Committee Europe (BSCE) , 13th Meeting, Bern, Switzerland 29th May to 2nd June 1978

    National Research Council Canada - National Science Library


    ...: Identification of Bird Remains as Part of the Bird Strike Reporting Procedure Birdstrikes - Helicopter in GAF Collisions with Birds of Prey in the Alps The Bird Strike Reporting System in Swiss Air...

  14. The Evolution of Preemptive Strikes in Israeli Operational Planning and Future Implications for the Cyber Domain (United States)


    The strategic and operational use of preemptive strikes has transitioned from the traditional tactic of air raids to the use of covert cyber attacks like...Stuxnet, operational planners can gain an understanding of the evolution of preemption as a concept. Examining this shift from air strikes to cyber ... attacks through the lens of U.S. Army Doctrine and the tenets of Unified Land Operations (Depth, Synchronization, Integration, Adaptability, Flexibility

  15. A numerical model for bird strike on sidewall structure of an aircraft nose


    Liu, Jun; Li, Yulong; Gao, Xiaosheng; Yu, Xiancheng


    In order to examine the potential of using the coupled smooth particles hydrodynamic (SPH) and finite element (FE) method to predict the dynamic responses of aircraft structures in bird strike events, bird-strike tests on the sidewall structure of an aircraft nose are carried out and numerically simulated. The bird is modeled with SPH and described by the Murnaghan equation of state, while the structure is modeled with finite elements. A coupled SPH–FE method is developed to simulate the bird...

  16. Upward streamers produced by a lightning strike to radio transmission towers (United States)

    Krider, E. Philip; Wetmore, Ralph H.


    A lightning strike to the center of three 78-m radio transmission towers produced upward discharges with lengths of 40 and 79 m from each of the neighboring towers. This strike also caused a number of insulators on guy wires that supported the tower to flash over, and the locations of these points and the two-dimensional geometry of the discharge channels are projected onto a vertical plane that is centered on the tower.

  17. The Left Labourites and the General Strike of 1926 in the UK

    Directory of Open Access Journals (Sweden)

    Evgeniya G. Blosfeld


    Full Text Available The author analyses the left labourites’ attitude to the interaction of the Labour Party and trade unions and use of general strike as a means of the social struggle. Besides the article analyses the left labourites’ estimation of 1926 general strike and the causes of the defeat, and the strike of the miners who decided to continue it. The left labourites defended the branch principle of the trade unions’ organization based on the shopstewards’ model which was better adopted for the strike struggle. The left labourites took into account that the general structure of the labour movement would remain the same, but the Labour Party would take over the leadership from trade unions. The left labourites supported the peaceful way of transition to socialism and they considered the general strike to be analogy of social revolution or a means of pressure of the government for nationalization of the main economic branches and the improvement of the workers’ life conditions. Under extreme circumstances, the general strike was considered to be a means to prevent antidemocratic revolution. Evaluating the general strike of 1926, the author marks the absence of unity in the leadership, hesitations and inconsistency of the left labourites themselves. They didn’t give a single proposal about the improvement of the working-class movement organization except of state British Trade Unions Congress. As a result, the criticism of the General Council’s renegade position was bestowed upon the leadership of the Miners Federation who didn’t submit to the General Council order to stop the strike.

  18. The single match approach to strike rate adjustments in batting performance measures in cricket. (United States)

    Lemmer, Hermanus H


    Batting performance measures containing strike rate adjustments take into account the important fact that if two batsmen had scored the same number of runs in a match, the one with the better strike rate had performed best. But match conditions can influence the batting and bowling performances of cricket players. On a good pitch a batsman can get a good score at a high strike rate, but if the pitch was bad, a similar good score is normally accompanied by a much lower strike rate. The main objective of this study is to propose a method that can be used to make batsmen's scores comparable despite the fact that playing conditions might have been very different. The number of runs scored by a batsman is adjusted by comparing his strike rate with the overall strike rate of all the players in the specific match. These adjusted runs are then used in the most appropriate formula to calculate the average of the batsman. The method is illustrated by using the results of the Indian Premier League 2009 Twenty20 Series played during May and June 2009. The main conclusion is that the traditional average is not the most appropriate measure to compare batsmen's performances after conclusion of a short series. Key pointsIt is unfair to compare the score of a batsman obtained on a good pitch under ideal batting conditions with that of a batsman who had to battle under severe conditions.By comparing a batsman's strike rate with the overall strike rate of the players in the specific match, his score can be adjusted to get a better figure for his true performance.The results demonstrate clearly that the use of adjusted scores lead to rankings that differ from those based on the traditional measures.

  19. Carrier Aviation and Hybrid Conflict: The Future of the Strike Fighter (United States)


    Throughout strike fighter squadrons, the TOPGUN manual is the bible, "TOPGUN recommends ... " is the gospel , and Strike Fighter Instructors (SFTI) are the...34. 60 Ibid, 7. 61 Ibid, 34. 62 Lambeth, 2. 63 Ibid .. 64 Ibid, 3 . . 65 Matthew Klam, "Status is ... for Navy Fighter Pilots; An Air-to-Air...Naval War College, 2004. Klain, Matthew . "Status is ... for Navy Fighter Pilots; An Air-to-Air Kill". NYTIMES. COM, November 15, 1998. http

  20. Professional solidarity versus responsibility for the health of the public: is a nurses' strike morally defensible? (United States)

    Tabak, N; Wagner, N


    The purpose of this article is to deliberate the moral and legal dilemma entailed in the weapon of the labour strike as a pressure tactic on the Israeli Finance Ministry regarding job slots, budgets and, in effect, violating the collective agreement signed by the nurses and impairing patients' treatment, as opposed to refraining from striking and suffering the heavy burden of work, the lack of trained personnel, low wages, and the inability to give patients proper, high quality treatment.

  1. The effect of immersion time to low carbon steel hardness and microstructure with hot dip galvanizing coating method (United States)

    Hakim, A. A.; Rajagukguk, T. O.; Sumardi, S.


    Along with developing necessities of metal materials, these rise demands of quality improvements and material protections especially the mechanical properties of the material. This research used hot dip galvanizing coating method. The objectives of this research were to find out Rockwell hardness (HRb), layer thickness, micro structure and observation with Scanning Electron Microscope (SEM) from result of coating by using Hot Dip Galvanizing coating method with immersion time of 3, 6, 9, and 12 minutes at 460°C. The result shows that Highest Rockwell hardness test (HRb) was at 3 minutes immersion time with 76.012 HRb. Highest thickness result was 217.3 μm at 12 minutes immersion. Microstructure test result showed that coating was formed at eta, zeta, delta and gamma phases, while Scanning Electron Microscope (SEM) showed Fe, Zn, Mn, Si and S elements at the specimens after coating.

  2. Social influences on ant-dipping acquisition in the wild chimpanzees (Pan troglodytes verus) of Bossou, Guinea, West Africa. (United States)

    Humle, Tatyana; Snowdon, Charles T; Matsuzawa, Tetsuro


    We currently have little understanding of the influence of learning opportunity, whether social or environmental, and maternal role on tool-use acquisition in young wild chimpanzees. This study aims to fill this gap by focusing on the acquisition of ant-dipping among chimpanzees of Bossou, Guinea. Ant-dipping is a hazardous tool-use behaviour aimed at army ants (Dorylus spp.). Bossou chimpanzees target these ants both at nests (high risk) and trails (low risk) and employ two techniques to consume them: direct mouthing and pull-through. We present data for 13 mother-offspring pairs (1-10 years old). Mothers with young chimpanzee material culture is a product of a complex interaction between social processes and ecological factors.

  3. Dimensional effects and scalability of Meta-Stable Dip (MSD) memory effect for 1T-DRAM SOI MOSFETs (United States)

    Hubert, A.; Bawedin, M.; Cristoloveanu, S.; Ernst, T.


    The difficult scaling of bulk Dynamic Random Access Memories (DRAMs) has led to various concepts of capacitor-less single-transistor (1T) architectures based on SOI transistor floating-body effects. Amongst them, the Meta-Stable Dip RAM (MSDRAM), which is a double-gate Fully Depleted SOI transistor, exhibits attractive performances. The Meta-Stable Dip effect results from the reduced junction leakage current and the long carrier generation lifetime in thin silicon film transistors. In this study, various devices with different gate lengths, widths and silicon film thicknesses have been systematically explored, revealing the impact of transistor dimensions on the MSD effect. These experimental results are discussed and validated by two-dimensional numerical simulations. It is found that MSD is maintained for small dimensions even in standard SOI MOSFETs, although specific optimizations are expected to enhance MSDRAM performances.

  4. All Sequential Dip-Coating Processed Perovskite Layers from an Aqueous Lead Precursor for High Efficiency Perovskite Solar Cells. (United States)

    Adnan, Muhammad; Lee, Jae Kwan


    A novel, sequential method of dip-coating a ZnO covered mesoporous TiO 2 electrode was performed using a non-halide lead precursor in an aqueous system to form a nanoscale perovskite film. The introduction of a ZnO interfacial layer induced significant adsorption in the non-halide lead precursor system. An efficient successive solid-state ion exchange and reaction process improved the morphology, crystallinity, and stability of perovskite solar cells. Improved surface coverage was achieved using successive ionic layer adsorption and reaction processes. When all sequential dipping conditions were controlled, a notable power conversion efficiency of 12.41% under standard conditions (AM 1.5, 100 mW·cm -2 ) was achieved for the perovskite solar cells fabricated from an aqueous non-halide lead precursor solution without spin-casting, which is an environmentally benign and low-cost manufacturing processes.


    Directory of Open Access Journals (Sweden)

    Hermanus H. Lemmer


    Full Text Available Batting performance measures containing strike rate adjustments take into account the important fact that if two batsmen had scored the same number of runs in a match, the one with the better strike rate had performed best. But match conditions can influence the batting and bowling performances of cricket players. On a good pitch a batsman can get a good score at a high strike rate, but if the pitch was bad, a similar good score is normally accompanied by a much lower strike rate. The main objective of this study is to propose a method that can be used to make batsmen's scores comparable despite the fact that playing conditions might have been very different. The number of runs scored by a batsman is adjusted by comparing his strike rate with the overall strike rate of all the players in the specific match. These adjusted runs are then used in the most appropriate formula to calculate the average of the batsman. The method is illustrated by using the results of the Indian Premier League 2009 Twenty20 Series played during May and June 2009. The main conclusion is that the traditional average is not the most appropriate measure to compare batsmen's performances after conclusion of a short series.

  6. The role of magmatic loads and rift jumps in generating seaward dipping reflectors on volcanic rifted margins (United States)

    Buck, W. Roger


    The largest volcanic constructs on Earth are the seismically imaged seaward dipping reflector (SDR) units found offshore of many rifted continental margins, including most that border the Atlantic Ocean. Whether their formation requires large magnitude (i.e. 10 s of km) of normal fault slip or results from the deflection of the lithosphere by the weight of volcanic flows is controversial. Though there is evidence for faulting associated with some SDRs, this paper considers the range of structures that can be produced by magmatic and volcanic loading alone. To do this an idealized mechanical model for the construction of rift-related volcanic flow structures is developed. Dikes open as plates move away from the center of a model rift and volcanic flows fill the depression produced by the load caused by dike solidification. The thin elastic plate flexure approximation allows a closed form description of the shape of both the contacts between flows and between the flows and underlying dikes. The model depends on two independent parameters: the flexure parameter, α, and the maximum isostatically supported extrusive layer thickness, w0. For reasonable values of these parameters the model reproduces the observed down-dip thickening of flows and the range of reflector dip angles. A numerical scheme using the analytic results allows simulation of the effect of temporal changes in the locus of magmatic spreading as well as changes in the amount of volcanic infill. Either jumps in the location of the center of diking or periods with no volcanism result in separate units or "packages" of model SDRs, in which the flow-dike contact dips landward, consistent with observations previously attributed only to listric normal fault offset. When jumps in the spreading center are small (i.e. less than α) they result in thicker, narrower volcanic units on one side of a rift compared to those on the other side. This is similar to the asymmetric distributions of volcanic packages seen

  7. Estimation of shear velocity contrast for dipping or anisotropic medium from transmitted Ps amplitude variation with ray-parameter (United States)

    Kumar, Prakash


    Amplitude versus offset analysis of P to P reflection is often used in exploration seismology for hydrocarbon exploration. In the present work, the feasibility to estimate crustal velocity structure from transmitted P to S wave amplitude variation with ray-parameter has been investigated separately for dipping layer and anisotropy medium. First, for horizontal and isotropic medium, the approximation of P-to-s conversion is used that is expressed as a linear form in terms of slowness. Next, the intercept of the linear regression has been used to estimate the shear wave velocity contrast (δβ) across an interface. The formulation holds good for isotropic and horizontal layer medium. Application of such formula to anisotropic medium or dipping layer data may lead to erroneous estimation of δβ. In order to overcome this problem, a method has been proposed to compensate the SV-amplitude using shifted version of SH-amplitude, and subsequently transforming SV amplitudes equivalent to that from isotropic or horizontal layer medium as the case may be. Once this transformation has been done, δβ can be estimated using isotropic horizontal layer formula. The shifts required in SH for the compensation are π/2 and π/4 for dipping layer and anisotropic medium, respectively. The effectiveness of the approach has been reported using various synthetic data sets. The methodology is also tested on real data from HI-CLIMB network in Himalaya, where the presence of dipping Moho has already been reported. The result reveals that the average shear wave velocity contrast across the Moho is larger towards the Indian side compared to the higher Himalayan and Tibetan regions.

  8. Slab dip, surface tectonics: How and when do they change following an acceleration/slow down of the overriding plate? (United States)

    Guillaume, Benjamin; Hertgen, Solenn; Martinod, Joseph; Cerpa, Nestor G.


    We present analogue models simulating the subduction of an oceanic lithosphere beneath an overriding plate advancing at variable rates. The convergence velocity is imposed by lateral boundary conditions in this experimental set. We analyze the geometry of the slab and the deformation of the overriding plate. Experiments confirm the strong correlation between the absolute velocity of the overriding plate on the one hand, the geometry of the subducting plate and the deformation of the overriding plate on the other hand. Following an instantaneous change in kinematic boundary conditions, the subduction system progressively shifts to a new steady-state regime. Models suggest that the adjustment time necessary to shift from the previous to the new equilibrium is independent of the imposed upper plate velocity. Transient stage lasts ∼ 12.5 ± 6 m.y. for the shallow slab dip (100-150-km depth), ∼ 29.2 ± 10 m.y. for the deeper slab dip (300-350-km depth), and ∼ 2.2 ± 2 m.y. for the upper plate deformation. The analysis of present-day subduction zones and their evolution through the last 20 m.y suggests an adjustment time of ∼15 m.y. for shallow slab dip and ∼20 m.y. for deep slab dip in Nature. Since only few subduction zones have shown a constant upper plate velocity over the last 15 m.y., it suggests that most of them are in a transient stage at present-day.

  9. Entwicklung und Applikationen einer DIP-APCI Ionenquelle zur direkten Analyse mittels Q-TOF- und Ion Trap-Massenspektrometrie


    Krieger, Sonja


    The work presented here describes the development of an ion source based on atmospheric pressure chemical ionization (APCI) that allows the direct mass spectrometric analysis of solid and liquid samples. The ion source makes use of a direct inlet probe (DIP)-system which automatically introduces the samples into the source region using a temperature-programmed push rod. The programmed heating of the push rod leads to a time-shifted vaporization of sample components as a result of their differ...

  10. 2-D Deformation analysis of a half-space due to a long dip-slip fault ...

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    tic deformation in a uniform half-space due to long faults has been attempted by a number of researchers. ... tic problem of elastic deformation of a half-space due to a long dip-slip fault of finite width. They obtained ... equation (1) and integrating over s between the limits 0 to L, where L = s2 − s1 (s1 ≤ s ≤ s2) is the width of ...

  11. Beta Dips in the Gaia Era: Simulation Predictions of the Galactic Velocity Anisotropy Parameter (β) for Stellar Halos (United States)

    Loebman, Sarah R.; Valluri, Monica; Hattori, Kohei; Debattista, Victor P.; Bell, Eric F.; Stinson, Greg; Christensen, Charlotte R.; Brooks, Alyson; Quinn, Thomas R.; Governato, Fabio


    The velocity anisotropy parameter, β, is a measure of the kinematic state of orbits in the stellar halo, which holds promise for constraining the merger history of the Milky Way (MW). We determine global trends for β as a function of radius from three suites of simulations, including accretion-only and cosmological hydrodynamic simulations. We find that the two types of simulations are consistent and predict strong radial anisotropy ( ∼ 0.7) for Galactocentric radii greater than 10 kpc. Previous observations of β for the MW’s stellar halo claim a detection of an isotropic or tangential “dip” at r ∼ 20 kpc. Using the N-body+SPH simulations, we investigate the temporal persistence, population origin, and severity of “dips” in β. We find that dips in the in situ stellar halo are long-lived, while dips in the accreted stellar halo are short-lived and tied to the recent accretion of satellite material. We also find that a major merger as early as z ∼ 1 can result in a present-day low (isotropic to tangential) value of β over a broad range of radii and angles. While all of these mechanisms are plausible drivers for the β dip observed in the MW, each mechanism in the simulations has a unique metallicity signature associated with it, implying that future spectroscopic surveys could distinguish between them. Since an accurate knowledge of β(r) is required for measuring the mass of the MW halo, we note that significant transient dips in β could cause an overestimate of the halo’s mass when using spherical Jeans equation modeling.

  12. Personality disorders in substance abusers: Validation of the DIP-Q through principal components factor analysis and canonical correlation analysis

    Directory of Open Access Journals (Sweden)

    Hesse Morten


    Full Text Available Abstract Background Personality disorders are common in substance abusers. Self-report questionnaires that can aid in the assessment of personality disorders are commonly used in assessment, but are rarely validated. Methods The Danish DIP-Q as a measure of co-morbid personality disorders in substance abusers was validated through principal components factor analysis and canonical correlation analysis. A 4 components structure was constructed based on 238 protocols, representing antagonism, neuroticism, introversion and conscientiousness. The structure was compared with (a a 4-factor solution from the DIP-Q in a sample of Swedish drug and alcohol abusers (N = 133, and (b a consensus 4-components solution based on a meta-analysis of published correlation matrices of dimensional personality disorder scales. Results It was found that the 4-factor model of personality was congruent across the Danish and Swedish samples, and showed good congruence with the consensus model. A canonical correlation analysis was conducted on a subset of the Danish sample with staff ratings of pathology. Three factors that correlated highly between the two variable sets were found. These variables were highly similar to the three first factors from the principal components analysis, antagonism, neuroticism and introversion. Conclusion The findings support the validity of the DIP-Q as a measure of DSM-IV personality disorders in substance abusers.

  13. Studies on the environmental chemistry and dissipation of 14C-labelled Deltamethrin and Amitraz in model dips

    International Nuclear Information System (INIS)

    Musumeci, M.R.; Coelho, P.V.; Luchini, L.C.


    The degradation of 14 C-labelled deltamethrin under variable conditions of pH and temperature, leaching of 14 C-labelled amitraz in soil columns and dissipation of these insecticides in model dipping vat was studied. Deltamethrin was stable for 28 d in buffer solutions at pH 4,7 and 8 and at temperature of 14, 28 and 35 deg. C, but degraded in a solution at pH 9. Metabolites identified by TLC corresponded to 3-phenoxybenzoic acid and 3-phenoxybenzyl alcohol. After 75 days of standing in a model dip, about 60% of the total radioactivity was found in the sediment and corresponded mainly to deltamethrin. When 14 C-Amitraz was applied to soil columns, placed under outdoor conditions, 4 months later all of the radiocarbon was found in the upper 10 cm section and about 90% of the recovered radioactivity corresponded with amitraz. A study of the dissipation of amitraz in a field vat showed that after 20 d of use the concentration of amitraz in a field dip decreased from 210 μg/mL to 155 μg/mL. (author)

  14. A facile dip-coating process for preparing highly durable superhydrophobic surface with multi-scale structures on paint films. (United States)

    Cui, Zhe; Yin, Long; Wang, Qingjun; Ding, Jianfu; Chen, Qingmin


    Superhydrophobic surfaces with multi-scale nano/microstructures have been prepared on epoxy paint surfaces using a feasible dip-coating process. The microstructures with 5-10 microm protuberances were first prepared on epoxy paint surface by sandblast. Then the nanostructures were introduced on the microstructure surface by anchoring 50-100 nm SiO(2) particles (nano-SiO(2)) onto the sandblasted paint surface, which was completed by dip-coating with a nano-SiO(2)/epoxy adhesive solution (M1). At last the surface was further modified for enhancing hydrophobicity by another dip-coating with a solution of a low surface energy polymer, aminopropyl terminated polydimethylsiloxane (ATPS) modified epoxy adhesive (M2). The water contact angle of the as-prepared samples reached as high as 167.8 degrees and the sliding angle was 7 degrees. The prepared superhydrophobic surface exhibited excellent durability to the high speed scouring test and high stability in neutral and basic aqueous solutions and some common organic solvents. In addition, this method can be adopted to fabricate large scale samples with a good homogeneity of the whole surface at very low cost.

  15. The Effect of Coriolis Force on the Formation of Dip on the Free Surface of Water Draining from a Tank

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Jong Chull; Kang, Dong Gu; Kim, Hho Jhung; Roh, Kyung Wan; Yune, Young Gill [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)


    For the case of RWT (refueling water tank) connecting to the ECC (emergency core cooling) line, it can be surmised that there is a possibility of ECC pump failure due to air ingression into the ECC supply line even before the RWT is drained away. Therefore, it is important to check if the operational limit of the RWT water level is set at a value higher than the critical height that causes a dip formation on the free surface of a draining liquid. In the previous work, such complex unsteady flow fields both in a simple water tank and in the RWT at the Korean standard nuclear power plant have been simulated using the CFX5.10 code which is well-known as one of the well-validated commercial CFD (Computational Fluid Dynamics) codes. However, for the simplicity of those calculations the Coriolis force has not been taken into account. Thus, in the present paper, the effect of Coriolis force-induced vortex flow on the dip formation of dip has been investigated for the simple water tank to confirm validity of the previous work. To do this the unsteady flow fields accompanied by vortex in the simple water tank has been simulated using the CFX5.10 code.

  16. An initial response of magnetic fields at geosynchronous orbit to Pi 2 onset as observed from the dip-equator

    Directory of Open Access Journals (Sweden)

    O. Saka


    Full Text Available Fluxgate magnetometer data recorded at the dip-equator (Huancayo, Peru; 1.44°N, 355.9° in geomagnetic coordinates; 12.1°S, 75.2°W in geographic coordinates; L = 1.00 with higher accuracy of timing (0.1 s and amplitude resolution (0.01 nT were utilized to survey an onset of Pi 2 pulsations in the midnight sector (2100–0100 LT during PROMIS (Polar Region and Outer Magnetosphere International Study periods (1 March–20 June, 1986. It is found that changing field line magnitude and vector as observed by magnetometer on board the synchronous satellites in the midnight sector often takes place simultaneously with the onset of Pi 2 pulsations at the dip-equator. The field disturbances that follow thereafter tend to last for some time both at the geosynchronous altitudes and the dip-equator. In this report, we examine the initial response of the field lines in space, and attempt to classify how the field line vector changed in the meridional plane. Key words. Magnetospheric physics · Magnetospheric configuration and dynamics · MHD waves and instabilities · Plasmasphere

  17. State of stress and crustal fluid migration related to west-dipping structures in the slab-forearc system in the northern Chilean subduction zone (United States)

    Salazar, P.; Kummerow, J.; Wigger, P.; Shapiro, S.; Asch, G.


    Previous studies in the forearc of the northern Chilean subduction zone have identified important tectonic features in the upper crust. As a result of these works, the West Fissure Fault System (WFFS) has recently been imaged using microseismic events. The WFFS is the westward-dipping, sharp lower boundary of the northern Chilean forearc and is geometrically opposed to subduction of the Nazca plate. The present article builds on this previous work and is novel in that it characterizes this structure's stress distribution using focal mechanisms and stress tensor analysis. The results of the stress tensor analysis show that the state of stress in the WFFS is related to its strike-slip tectonic context and likely represents a manifestation of local forces associated with the highest areas in the Andes. Two seismic clusters have also been identified; these clusters may be associated with a blind branch of the WFFS. We studied these clusters in order to determine their sources and possible connection with fluid migration across the upper plate. We observed that the two clusters differ from one another in some regards. The central cluster has characteristics consistent with an earthquake swarm with two clearly identifiable phases. Conversely, the SW cluster has a clear main shock associated with it, and it can be separated into two subclusters (A and A΄). In contrast, similarities among the two clusters suggest that the clusters may have a common origin. The b-values for both clusters are characteristic of tectonic plate boundaries. The spatial spreading, which is approximately confined to one plane, reflects progressive growth of the main fracture underlying the swarm and subcluster A. We also find that earthquakes themselves trigger aftershocks near the borders of their rupture areas. In addition, the spatio-temporal migration of hypocentres, as well as their spatial correlation with areas that are interpreted to be fluid migration zones, suggest that there is a close

  18. Concussion in professional football: biomechanics of the striking player--part 8. (United States)

    Viano, David C; Pellman, Elliot J


    Concussive impacts in professional football were simulated in laboratory tests to determine the collision mechanics resulting in injury to the struck player and the biomechanics of the striking players, who were not concussed or neck-injured in the tackle. Twenty-seven helmet-to-helmet collisions were reconstructed in laboratory tests using Hybrid III dummies. The head impact velocity, direction, and kinematics matched game video. Translational and rotational head accelerations and six-axis upper neck loads and moments were used to evaluate how the striking player delivered the concussive blow. The neck injury criterion, Nij, was calculated to assess neck injury risks in the striking player. The time-averaged impact force reached 6372 +/- 2486 N at 7.2 milliseconds because of 46.8 +/- 21.7 g head acceleration and 3624 +/- 1729 N neck compression force in the striking player. Fifty-seven percent of the load was contributed by neck compression. The striking players had their heads down and lined up the impact axis through their necks and torsos. This allowed momentum transfer with minimal neck bending and increased the effective mass of the striking player to 1.67 times that of the struck player at peak load. The impact caused 94.3 +/- 27.5 g head acceleration in the concussed players and 67.9 +/- 14.5 g without concussion (t = 2.06, df = 25, P = 0.025). The striking player's Nij was greater than tolerance in 9 of 27 cases by exceeding the 4000 N neck compression limit. For these cases, the average neck compression force was 6631 +/- 977 N (range, 5210-8194 N). Nij was 1.25 +/- 0.16 for eight cases above the tolerance Nij = 1.0. In the NFL, striking players line up their heads, necks, and torsos to deliver maximum force to the other player in helmet-to-helmet impacts. The concussive force is from acceleration of the striking player's head and torso load through the neck. Even though neck responses exceeded tolerances, no striking player experienced neck injury or

  19. Origin, Composition and Relative Timing of Seaward Dipping Reflectors on the Pelotas Rifted Margin, South Atlantic (United States)

    Harkin, C. J.; Kusznir, N.; Roberts, A.; Manatschal, G.; McDermott, K.


    Deep-seismic reflection data from the Pelotas Basin, offshore Brazil displays a large package of seaward dipping reflectors (SDRs) with an approximate width of 200 km and a varying thickness of 10km to 17km. These have previously been interpreted as volcanic SDRs, a common feature of magma-rich rifted margins. Detailed observations show a change in seismic character within the SDR package possibly indicating a change depositional environments as the package evolved. Using gravity anomaly inversion, we examine the SDRs to investigate whether they are likely to be composed predominantly of massive basaltic flows or sedimentary-volcaniclastic material through the use of gravity inversion. By matching the Moho in depth and two-way travel time from gravity and seismic data, we test the likely proportion of sediments to basalt (the basalt fraction). The results are used to determine the lateral variation in basalt fraction within the SDRs. In addition, we use 2D flexural-backstripping and reverse thermal-subsidence modelling for palaeobathymetric analysis, investigating whether each sub-package was deposited in a sub-aerial or marine environment. Our analysis suggests that the overall SDR basalt fraction and bulk density decrease oceanwards, possibly due to increasing sediment content or perhaps resulting from a change in basalt flows to hyaloclastites as water depth increases. Additionally, we find that the SDRs can be split into two major sub-packages. The inner SDR package consists of lava flows from syn-tectonic eruptions in a sub-aerial environment, associated with the onshore Paraná Large Igneous Province, flowing eastwards into an extensional basin. The outer SDR package has reflectors that appear to progressively offlap oceanwards in a similar fashion to those described previously, inferring extrusion within a marine environment sourced from an eastwards migrating ocean ridge. We are able to determine that two separate and independently-sourced SDR packages

  20. Comparative life cycle cost assessment of painted and hot-dip galvanized bridges. (United States)

    Rossi, B; Marquart, S; Rossi, G


    The study addresses the life cycle cost assessment (LCCA) of steel bridges, focusing on the maintenance activities and the maintenance scenario. Firstly, the unit costs of maintenance activities and their durability (i.e. the time between two activities) are evaluated. Pragmatic data are provided for the environment category C4 and for three activities: Patch Up, Overcoating and Remove & Replace. A comparative LCCA for a typical hypothetic steel girder bridge is carried out, either painted or hot-dip galvanized (HDG), in the environmental class C4. The LCC versus the cumulated life is provided for both options. The initial cost of the steel unpainted option is only 50.3% of the HDG option. It is shown that after 'Overcoating' occurring at 18.5 years, the total Net Present Value (NPV) of the painted option surpasses that of the HDG option. A sensitivity analysis of the NPV to the cost and service life parameters, the escalation and discount rates is then performed. The discount and escalation rates, considerably influences the total LCC, following a non-linear trend. The total LCC decreases with the discount rate increasing and, conversely, increases with the escalation rate increasing. Secondly, the influence of the maintenance scenario on the total LCC is assessed based on a probabilistic approach. A permutation of the three independent maintenance activities assumed to occur six times over the life of the bridge is considered and a probability of occurrence is associated to each unique scenario. The most probable scenarios are then classified according to their NPV or achieved service life. This approach leads to the definition of a cost-effective maintenance scenario i.e. the scenario, within all the considered permutations, that has the minimum LCC in a range of lifespan. Besides, the probabilistic analysis also shows that, whatever the scenario, the return on investment period ranges between 18.5 years and 24.2 years. After that period, the HDG option becomes

  1. Foot Strike Patterns Differ Between Children and Adolescents Growing up Barefoot vs. Shod. (United States)

    Hollander, Karsten; de Villiers, Johanna Elsabe; Venter, Ranel; Sehner, Susanne; Wegscheider, Karl; Braumann, Klaus-Michael; Zech, Astrid


    Effects of early and permanent footwear use are not well understood. The aim of this study was to investigate the effects of habituation to footwear on foot strike patterns of children and adolescents. Healthy habitually barefoot and shod participants (aged 6-18 years) from South Africa (n=288) and Germany (n=390) performed multiple 20-m jogging and running trials with and without shoes. Each foot strike was captured using a high-speed camera to determine a rearfoot or non-rearfoot strike. The probability of a rearfoot strike in both cohorts and each age was analyzed by using a mixed-effects logistic regression adjusted for possible confounders. Habitually barefoot children showed a higher probability of using rearfoot strikes than habitually shod children (p<0.001). The probability was age-dependent and decreased in habitually barefoot children with age (OR barefoot-jogging =0.82, 95% CI, 0.71 to 0.96, p=0.014; OR barefoot-running =0.58, 95% CI, 0.50 to 0.67, p<0.001 and OR shod-running =0.68, 95% CI, 0.59 to 0.79, p<0.001). In habitually shod children, the probability increased significantly for shod jogging (OR=1.19, 95% CI, 1.05 to 1.35, p=0.006). To conclude, foot strike patterns of children are influenced by habituation to footwear. Younger habitually barefoot children show higher rates of rearfoot strikes for shod and barefoot running, and it converges in later adolescence. © Georg Thieme Verlag KG Stuttgart · New York.

  2. Foot strike patterns of recreational and sub-elite runners in a long-distance road race. (United States)

    Larson, Peter; Higgins, Erin; Kaminski, Justin; Decker, Tamara; Preble, Janine; Lyons, Daniela; McIntyre, Kevin; Normile, Adam


    Although the biomechanical properties of the various types of running foot strike (rearfoot, midfoot, and forefoot) have been studied extensively in the laboratory, only a few studies have attempted to quantify the frequency of running foot strike variants among runners in competitive road races. We classified the left and right foot strike patterns of 936 distance runners, most of whom would be considered of recreational or sub-elite ability, at the 10 km point of a half-marathon/marathon road race. We classified 88.9% of runners at the 10 km point as rearfoot strikers, 3.4% as midfoot strikers, 1.8% as forefoot strikers, and 5.9% of runners exhibited discrete foot strike asymmetry. Rearfoot striking was more common among our sample of mostly recreational distance runners than has been previously reported for samples of faster runners. We also compared foot strike patterns of 286 individual marathon runners between the 10 km and 32 km race locations and observed increased frequency of rearfoot striking at 32 km. A large percentage of runners switched from midfoot and forefoot foot strikes at 10 km to rearfoot strikes at 32 km. The frequency of discrete foot strike asymmetry declined from the 10 km to the 32 km location. Among marathon runners, we found no significant relationship between foot strike patterns and race times.

  3. Select injury-related variables are affected by stride length and foot strike style during running. (United States)

    Boyer, Elizabeth R; Derrick, Timothy R


    Some frontal plane and transverse plane variables have been associated with running injury, but it is not known if they differ with foot strike style or as stride length is shortened. To identify if step width, iliotibial band strain and strain rate, positive and negative free moment, pelvic drop, hip adduction, knee internal rotation, and rearfoot eversion differ between habitual rearfoot and habitual mid-/forefoot strikers when running with both a rearfoot strike (RFS) and a mid-/forefoot strike (FFS) at 3 stride lengths. Controlled laboratory study. A total of 42 healthy runners (21 habitual rearfoot, 21 habitual mid-/forefoot) ran overground at 3.35 m/s with both a RFS and a FFS at their preferred stride lengths and 5% and 10% shorter. Variables did not differ between habitual groups. Step width was 1.5 cm narrower for FFS, widening to 0.8 cm as stride length shortened. Iliotibial band strain and strain rate did not differ between foot strikes but decreased as stride length shortened (0.3% and 1.8%/s, respectively). Pelvic drop was reduced 0.7° for FFS compared with RFS, and both pelvic drop and hip adduction decreased as stride length shortened (0.8° and 1.5°, respectively). Peak knee internal rotation was not affected by foot strike or stride length. Peak rearfoot eversion was not different between foot strikes but decreased 0.6° as stride length shortened. Peak positive free moment (normalized to body weight [BW] and height [h]) was not affected by foot strike or stride length. Peak negative free moment was -0.0038 BW·m/h greater for FFS and decreased -0.0004 BW·m/h as stride length shortened. The small decreases in most variables as stride length shortened were likely associated with the concomitant wider step width. RFS had slightly greater pelvic drop, while FFS had slightly narrower step width and greater negative free moment. Shortening one's stride length may decrease or at least not increase propensity for running injuries based on the variables

  4. Acute neuromuscular responses to short and long roundhouse kick striking paces in professional Muay Thai fighters. (United States)

    Cimadoro, Giuseppe; Mahaffey, Ryan; Babault, Nicolas


    Muay Thai fighters strongly rely on the use of the roundhouse kick due to its effectiveness (i.e. power) and implications on the final score. Therefore, different striking tempos at full power are used during training as a method to enhance kicking power. However, the neuromuscular responses are unknown. Thus, the goal of this study was to investigate neuromuscular responses to a single bout of shorter (every second = H1) and longer (every 3s = H3) kick striking time intervals, measured with the countermovement jump (CMJ). Nine professional Muay Thai fighters participated in this randomized, cross-over trial. CMJs were measured on force plates before and after (post 0min, post 5min, post 10min, post 20min and post 30min) two striking (1set x 20reps) conditions (H1; H3). Although no difference was observed between H1 and H3 values, neuromuscular fatigue parameters displayed different patterns over time. CMJ height decreased immediately after H3 striking (PMuay Thai and conditioning coaches should focus on hard striking with both long and slow pacing during specific heavy bag or pad work.

  5. The balancing act between the constitutional right to strike and the constitutional right to education

    Directory of Open Access Journals (Sweden)

    H J (Jaco Deacon


    Full Text Available While the South African Constitution enshrines both children's right to a basic education and teachers' right to strike, conflict between these two often occurs when the way in which teachers' unions conduct strike actions detracts from learners' education. This article identifies the parties affected by industrial action in the school context, and then proceeds to examine educators' right to strike as defined by the provisions of the Labour Relations Act. The unique implications of picketing in the education environment are then discussed, covering relevant questions such as where pickets may be held, the issue of picketing rules as well as unprotected pickets. Even though we are faced with a qualified right to strike as opposed to an unqualified right to education, the South African reality seems to be that striking teachers are handled with kid gloves. It is therefore concluded that the vast range of existing laws regulating protest action should be applied more effectively. One of the most important aspects should be the picketing rules, which should clearly determine whether picketing in fact contributes to resolution of the dispute, and how learners' interests and rights may best be actualised.

  6. Lightning Strike Ablation Damage Characteristic Analysis for Carbon Fiber/Epoxy Composite Laminate with Fastener (United States)

    Yin, J. J.; Li, S. L.; Yao, X. L.; Chang, F.; Li, L. K.; Zhang, X. H.


    In order to analyze the lightning strike ablation damage characteristic of composite laminate with fastener, based on the energy-balance relationship in lightning strike, mathematical analysis model of ablation damage of composite laminate with fastener was constructed. According to the model, an effective three dimensional thermal-electrical coupling analysis finite element model of composite laminate with fastener suffered from lightning current was established based on ABAQUS, and lightning strike ablation damage characteristic was analyzed. Analytical results reveal that lightning current could conduct through the thickness direction of the laminate due to the existence of metallic fastener, and then distribute to all layers, finally conducted in-the-plane of each layer, conductive ability of different layup orientations depend on potential distribution and in-the-plane electrical conductivity along potential gradient declining direction; different potential boundaries correspond to different potential distribution in each layer, and result in conductive ability of different layup orientations was changed, then caused different lightning strike ablation damage distribution. According to the investigation in this paper, we can recognize the lightning strike ablation damage characteristic of composite laminate with fastener qualitatively.

  7. Public Servants' right to strike in Lesotho, Botswana and South Africa – A Comparative Study

    Directory of Open Access Journals (Sweden)

    Tamara Cohen


    Full Text Available Restrictions on the rights of public officers to strike are permitted by the Constitutions of Lesotho, Botswana and South Africa, where such limitations are reasonable, necessary and justifiable in a democratic society. The limitation of this right in the context of public servants is endorsed by the ILO in the Freedom of Association Digest of Decisions and Principles which holds that "[t]he right to strike can be restricted or even prohibited in the public service or in essential services in so far as a strike there could cause serious hardship to the national community and provided that these limitations are accompanied by certain compensatory guarantees". Public officers in Lesotho are deprived of the right to join trade unions or to strike, without exception or justification. Furthermore in Lesotho no dispute resolution mechanism exists to effectively facilitate the final resolution of disputes of interest in the public sector. This paper considers whether the limitations imposed on the freedom and right to strike of public officers in Lesotho are in breach of international obligations and are reasonable and justifiable in a free and democratic society committed to the rule of law. In so doing a comparative analysis of the jurisdictions of South Africa and Botswana is undertaken. It concludes that Lesotho is in breach of its obligations as a member state of the ILO and its constitutional commitment to freedom of association and needs to be urgently addressed.

  8. Neotectonics of a subduction/strike-slip transition: the northeastern Dominican Republic

    Energy Technology Data Exchange (ETDEWEB)

    Winslow, M.A.; McCann, W.R.


    The Septentrional fault system in the northeastern Dominican Republic marks the zone where the North American-Carribean plate boundary is evolving from subduction to strike-slip motion, and where terranes appear to be forming and migrating laterally in a subduction complex/forearc region. On the Island of Hispaniola, slip vectors are oblique to the strike of the Puerto Rico trench, and oblique subduction thrusts the upper plate over normal seafloor. The offshore geology and seismicity of the northern Caribbean suggest that uplift, broad crustal warping, thrusting, and strike-slip faulting (ie. collisional tectonics) should be present in the northern part of the Dominican Republic. The high topography (>1000m), high levels of seismicity, and large earthquakes support the hypothesis of contemporary deformation in Hispaniola. In this region, the subduction regime dies out toward the west, and deformation is transferred to onshore, oblique-slip faults. As this change in tectonic style has occurred in Neogene to Recent times, we are investigating the modern evolution of a plate boundary. We have already documented: (1) the presence of a strike-slip faulting in the northeastern Dominican Republic; (2) an anomalous push-up structure; and (3) a region of numerous splay faults. In conclusion, recent seismicity suggest a wide zone of deformation and variations in interplate motions near Hispaniola. This island lies at the western limit of active underthrusting and at the eastern limit of onshore faulting, i.e., at an important transition from a subduction to strike-slip regime.

  9. Source parameters of the Izmit-Bolu 1999 (Turkey earthquake sequences from teleseismic data

    Directory of Open Access Journals (Sweden)

    E. Louvari


    Full Text Available Body waveform modelling and far-field displacement spectral analyses were used to study the source parameters of five of the largest earthquakes of the (Izmit-Bolu Turkey 1999 sequence. The derived source parameters for the August 17, 1999 M W 7.4 event are: strike = 267°, dip = 85°, rake = – 175°, h = 10 km, M 0 = 1.31×10 20 Nm. The length of the fault was found equal to 76 km, the average displacement 6.4 m and the static stress drop 90 bars. The Bolu November 12, 1999 M W 7.1 event has a focal mechanism with strike = 262°, dip = 53°, rake = –177°, h = 12 km, M 0 = 4.71×10 19 Nm, fault length of 56 km, average displacement 2.1 m and average static stress drop 29 bars. The focal mechanisms of three other aftershocks of the Izmit sequence indicate right lateral strike slip motion, as well. The slip vectors of the events studied are in accordance with the GPS velocity vectors, have a mean azimuth of 269° and reveal the extrusion of the Anatolian plate towards the Aegean.

  10. Characterization for rbs of Titanium Oxide thin films grown by Dip Coating in a coloidal suspension of nano structured Titanium Oxide

    International Nuclear Information System (INIS)

    Pedrero, E.; Vigil, E.; Zumeta, I.


    The depth of Titanium Oxide thin films grown by Dip Coating in a coloidal suspension of nano structured Titanium Oxide was characterized using Rutherford Backscattering Spectrometry. Film depths are compared in function of bath and suspension parameters

  11. "Construction of low cost spin and dip coaters for thin film deposition using open source technology 4,40-bis(tetrahydrothiopyranyl)’’"


    Dabirian Tehrani, Reza


    A novel low cost method was developed for the construction of a spin coater and a dip coater device incorporating inexpensive mechanical components and open-source software. Both devices are utilized for depositing thin films, and can be built with interdisciplinary knowledge of physics, mechanics, and electronics at the undergraduate level. The spin coater permits a wide speed range (from 500 to 10,000 rpm), and the velocity range of the dip coater stretches (from 0.6...

  12. DIP (pneumonia intersticial descamativa: como quadro do pulmão do tabaco – apresentação de um caso

    Directory of Open Access Journals (Sweden)

    Vítor Sousa


    Full Text Available RESUMO: A DIP (pneumonia intersticial descamativa é uma doença pulmonar intersticial caracterizada pela acumulação difusa e uniforme de macrófagos alveolares. Há forte associação com o tabaco sendo que 90% dos doentes são fumadores. As doenças relacionadas com o tabaco no pulmão são diversas e incluem os tumores, enfisema, bronquite crónica, RBILD (bronquiolite respiratória associada a doença pulmonar intersticial, DIP e histiocitose de células de Langerhans. Os autores apresentam um caso de DIP. É realizada breve revisão teórica e discussão do caso à luz da sua associação com o tabaco.REV PORT PNEUMOL 2004; X (5: 431-435 ABSTRACT: DIP (Desquamative Interstitial Pneumonia is an interstitial lung disease with diffuse and uniform accumulation of alveolar macrophages. There is a strong association with tobacco since 90% of the patients are smokers. The interstitial lung diseases related to tobacco are diverse and include tumours, emphysema, chronic bronchitis, RBILD (Respiratory Bronchilites associated Interstitial Lung Disease, DIP and Langerhans Cell Histiocitosis. The authors present a case of DIP. A brief theorycal revision and discussion of a case is made facing the association with tobacco.REV PORT PNEUMOL 2004; X (5:431-435 Palavras-chave: Pulmão, pneumonia intersticial descamativa, DIP, interstício, Key-words: Lung, desquamative interstitial pneumonia, DIP, interstitium

  13. [Hunger striking in prisons: ethics and the ethical and legal aspects]. (United States)

    García-Guerrero, J


    Hunger strike is a common form of protest in prisons and is a potential cause of many types of problems, both for the prison administration and the doctors who care for prisoners who participate in one. Issues of conflict of rights and obligations involved, and how to treat people who are subject to the Administration, which in this case takes the position of guarantor, have created major controversies over doctrine. Conscientious objection and the conflict of dual loyalty of doctors working in prisons are also issues closely linked to a prison hunger strike. In this paper we review the solution given to the problem of treatment of a prison hunger strike from three perspectives: ethics, ethical and legal.

  14. Down the needle! Should public sector nurses in South Africa have the right to strike? (United States)

    Heunis, C; Pelser, A J


    It is often argued that because the public sector provides essential services, it is intolerable that the citizenry be denied its entitlement because of a domestic dispute between civil servants (such as nurses) and the state. In this contribution an attempt is made to unravel a number of ideological, legislative and ethical issues relating to the right of the public sector nurse to strike. Notwithstanding the merits of opposite contentions, it is argued that public sector nurses should, in fact, have the right to strike. If this right is to be legitimized, however, due consideration should be given to problems relating to nurses' labour organisation and preventative measures to ensure minimal harm to patients in the planning and in the course of strike action.

  15. Evaluation of blade-strike models for estimating the biological performance of large Kaplan hydro turbines

    Energy Technology Data Exchange (ETDEWEB)

    Deng, Z. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carlson, T. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ploskey, G. R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Richmond, M. C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)


    Bio-indexing of hydro turbines has been identified as an important means to optimize passage conditions for fish by identifying operations for existing and new design turbines that minimize the probability of injury. Cost-effective implementation of bio-indexing requires the use of tools such as numerical and physical turbine models to generate hypotheses for turbine operations that can be tested at prototype scales using live fish. Blade strike has been proposed as an index variable for the biological performance of turbines. Report reviews an evaluation of the use of numerical blade-strike models as a means with which to predict the probability of blade strike and injury of juvenile salmon smolt passing through large Kaplan turbines on the mainstem Columbia River.

  16. ST-segment elevation following lightning strike: case report and review of the literature. (United States)

    Akın, Alper; Bilici, Meki; Demir, Fikri; Gözü Pirinççioğlu, Ayfer; Yıldırım, Ahmet


    Lightning strikes may cause injury to the heart, ranging from slight electrocardiographic changes to fatal damage. As heart injury is the most important cause of mortality in these patients, cardiac monitoring is crucial. Even though various ECG changes have been reported, published data on pathologic ST-segment changes is scarce. Herein, we present a seven-year old patient with ST-segment elevation following a lightning strike. There is not sufficient data regarding lightning-related myocardial ischemia. However, because of the similar effects of lightning strikes and high-voltage electric shocks, we believe myocardial injury related to lightning may be managed in the same manner as is cardiac involvement associated with electric shock.

  17. [Lightning strikes and lightning injuries in prehospital emergency medicine. Relevance, results, and practical implications]. (United States)

    Hinkelbein, J; Spelten, O; Wetsch, W A


    Up to 32.2% of patients in a burn center suffer from electrical injuries. Of these patients, 2-4% present with lightning injuries. In Germany, approximately 50 people per year are injured by a lightning strike and 3-7 fatally. Typically, people involved in outdoor activities are endangered and affected. A lightning strike usually produces significantly higher energy doses as compared to those in common electrical injuries. Therefore, injury patterns vary significantly. Especially in high voltage injuries and lightning injuries, internal injuries are of special importance. Mortality ranges between 10 and 30% after a lightning strike. Emergency medical treatment is similar to common electrical injuries. Patients with lightning injuries should be transported to a regional or supraregional trauma center. In 15% of all cases multiple people may be injured. Therefore, it is of outstanding importance to create emergency plans and evacuation plans in good time for mass gatherings endangered by possible lightning.

  18. Practice Makes Perfect?: The Changing Civilian Toll of CIA Drone Strikes in Pakistan

    Directory of Open Access Journals (Sweden)

    Avery Plaw


    Full Text Available U.S. officials have recently claimed that the CIA has sharply reduced the number of civilian casualties resulting from covert Predator and Reaper drone strikes in the Taliban-controlled agencies of Northwest Pakistan. Critics, especially in Pakistan, along with human rights NGOs have, however, questioned these claims. This article examines independent databases tracking the drone strikes and finds that there is significant support for the U.S. officials’ claims, or at least for their more moderate assertions. It also briefly reviews the explanations that have been offered for the declining civilian death toll from drone strikes. It shows that there is reason to believe that this development is the deliberate result of adjustments to CIA targeting procedures and improvements in spy networks and technology, and thus is likely to prove broadly sustainable at least for the immediate future.

  19. Probability, consequences, and mitigation for lightning strikes to Hanford site high-level waste tanks

    Energy Technology Data Exchange (ETDEWEB)

    Zach, J.J.


    The purpose of this report is to summarize selected lightning issues concerning the Hanford Waste Tanks. These issues include the probability of lightning discharge striking the area immediately adjacent to a tank including a riser, the consequences of significant energy deposition from a lightning strike in a tank, and mitigating actions that have been or are being taken. The major conclusion of this report is that the probability of a lightning strike depositing sufficient energy in a tank to cause an effect on employees or the public is unlikely;but there are insufficient, quantitative data on the tanks and waste to prove that. Protection, such as grounding of risers and air terminals on existing light poles, is recommended.

  20. Ankle and knee kinetics between strike patterns at common training speeds in competitive male runners. (United States)

    Kuhman, Daniel; Melcher, Daniel; Paquette, Max R


    The purpose of this study was to investigate the interaction of foot strike and common speeds on sagittal plane ankle and knee joint kinetics in competitive rear foot strike (RFS) runners when running with a RFS pattern and an imposed forefoot strike (FFS) pattern. Sixteen competitive habitual male RFS runners ran at two different speeds (i.e. 8 and 6 min mile(-1)) using their habitual RFS and an imposed FFS pattern. A repeated measures analysis of variance was used to assess a potential interaction between strike pattern and speed for selected ground reaction force (GRF) variables and, sagittal plane ankle and knee kinematic and kinetic variables. No foot strike and speed interaction was observed for any of the kinetic variables. Habitual RFS yielded a greater loading rate of the vertical GRF, peak ankle dorsiflexor moment, peak knee extensor moment, peak knee eccentric extensor power, peak dorsiflexion and sagittal plane knee range of motion compared to imposed FFS. Imposed FFS yielded greater maximum vertical GRF, peak ankle plantarflexor moment, peak ankle eccentric plantarflexor power and sagittal plane ankle ROM compared to habitual RFS. Consistent with previous literature, imposed FFS in habitual RFS reduces eccentric knee extensor and ankle dorsiflexor involvement but produce greater eccentric ankle plantarflexor action compared to RFS. These acute differences between strike patterns were independent of running speeds equivalent to typical easy and hard training runs in competitive male runners. Current findings along with previous literature suggest differences in lower extremity kinetics between habitual RFS and imposed FFS running are consistent among a variety of runner populations.