WorldWideScience

Sample records for stress intensity solution

  1. Study on applicability of stress intensity factor solutions for flaw evaluation

    International Nuclear Information System (INIS)

    Miura, Naoki; Nagai, Masaki; Takahashi, Yukio

    2014-01-01

    Stress intensity factor is the quantity which characterizes the singularity of the stress field near a crack tip in the scheme of the linear elastic fracture mechanics, and is used for fatigue and/or SCC crack propagation evaluation. Stress intensity factor depends on the shape and the size of cracked structures, and is frequently prepared as the tabulated correction factors which are the functions of crack depth ratio, aspect ratio, etc. Some stress intensity factor solutions have been included in the JSME rules on fitness-for-service for nuclear power plants. Many of them have been significantly revised on the latest (2012) version of the rules, however, the validation of the revised solutions was not adequate so far. In this study, the implication of the revision was investigated together with its technical basis. A comprehensive comparison was made between available solutions including the 2008 and 2012 version of the rules. It was ascertained that the solutions in the 2012 version provided stress intensity factors consistent with the previous version and the referential stress intensity factors. (author)

  2. Review and synthesis of stress intensity factor solutions applicable to cracks in bolts

    International Nuclear Information System (INIS)

    James, L.A.; Mills, W.J.

    1988-01-01

    The available literature for stress intensity factor solutions for cracks in round bars, both threaded and unthreaded, subjected to either tension or bending, is reviewed. The results are synthesized into a form that is appropriate for the analysis of bolts and studs. (author)

  3. New stress intensity factor solutions for an elliptical crack in a plate

    International Nuclear Information System (INIS)

    Delliou, P.L.; Barthelet, B.

    2005-01-01

    Crack assessment in engineering structures relies first on accurate evaluation of the stress intensity factors. In recent years, a large work has been conducted in France by the Atomic Energy Commission to develop influence coefficients for surface cracks in pipes. However, the problem of embedded cracks in plates (and pipes) which is also of practical importance has not received so much attention. Presently, solutions for elliptical cracks are available either in infinite solid with a polynomial distribution of normal loading or in plate, but restricted to constant or linearly varying tension. This paper presents the work conducted at EDF R and D to obtain influence coefficients for plates containing an elliptical crack with a wide range of the parameters : relative size (2a/t ratio), shape (a/c ratio) and free surface proximity (a/d ratio where d is the distance from the center of the ellipse to the closest free surface). These coefficients were developed through extensive 3D finite element calculations : 200 geometrical configurations were modeled, each containing from 18000 to 26000 nodes. The limiting case of the tunnel crack (a/c = 0) was also analyzed with 2D finite element calculation (50 geometrical configurations). The accuracy of the results was checked by comparison with analytical solutions for infinite solids and, when possible, with solutions for finite-thickness plates (generally loaded in constant tension). (authors)

  4. Analytical Solution for Stress Field and Intensity Factor in CSTBD under Mixed Mode Conditions

    Directory of Open Access Journals (Sweden)

    Najaf Ali Ghavidel

    2014-06-01

    Full Text Available Considering the fact that rocks fail faster under tensile stress, rock tensile strength is of greatimportance in applications such as blasting, rock fragmentation, slope stability, hydraulic fracturing,caprock integrity, and geothermal energy extraction. There are two direct and indirect methods tomeasure tensile strength. Since direct methods always encompass difficulties in test setup, indirectmethods, specifically the Brazilian test, have often been employed for tensile strength measurement.Tensile failure is technically attributed to crack propagation in rock. Fracture mechanics hassignificant potential for the determination of crack behaviour as well as propagation pattern. To applyBrazilian tests, cracked disc geometry has been suggested by the International Society for RockMechanics ISRM. Accordingly, a comprehensive study is necessary to evaluate stress field and stressintensity factor (SIF around the crack in the centre of the specimen. In this paper, superpositionprinciple is employed to solve the problem of cracked straight-through Brazilian disc (CSTBD, usingtwo methods of dislocation and complex stress function. Stress field and SIF in the vicinity of thecrack tip are then calculated. With the proposed method, the magnitude of critical load for crackinitiation in structures can be predicted. This method is valid for any crack of any arbitrary length andangle. In addition, numerical modelling has been carried out for the Brazilian disc. Finally, theanalytical solution has been compared with numerical modelling results showing the same outcomefor both methods.

  5. The Pursuit of K: Reflections on the Current State-of-the-Art in Stress Intensity Factor Solutions for Practical Aerospace Applications

    Science.gov (United States)

    CraigMcClung, R.; Lee, Yi-Der; Cardinal, Joseph W.; Guo, Yajun

    2012-01-01

    The elastic stress intensity factor (SIF, commonly denoted as K) is the foundation of practical fracture mechanics (FM) analysis for aircraft structures. This single parameter describes the first-order effects of stress magnitude and distribution as well as the geometry of both structure/component and crack. Hence, the calculation of K is often the most significant step in fatigue analysis based on FM. This presentation will provide several reflections on the current state-of-the-art in SIF solution methods used for practical aerospace applications, including a brief historical perspective, descriptions of some recent and ongoing advances, and comments on some remaining challenges. Newman and Raju made significant early contributions to practical structural analysis by developing closed-form SIF equations for surface and corner cracks in simplified geometries, often based on empirical fits of finite element (FE) solutions. Those solutions (and others like them) were sometimes revised as new analyses were conducted or limitations discovered. The foundational solutions have exhibited striking longevity, despite the relatively "coarse" FE models employed many decades ago. However, in recent years, the accumulation of different generations of solutions for the same nominal geometry has led to some confusion (which solution is correct?), and steady increases in computational capabilities have facilitated the discovery of inaccuracies in some (not all!) of the legacy solutions. Some examples of problems and solutions are presented and discussed, including the challenge of maintaining consistency with legacy design applications. As computational power has increased, the prospect of calculating large numbers of SIF solutions for specific complex geometries with advanced numerical methods has grown more attractive. Fawaz and Andersson, for example, have been generating literally millions of new SIF solutions for different combinations of multiple cracks under simplified

  6. Estimation of stress intensity factors for circumferential cracked pipes under welding residual stress filed

    International Nuclear Information System (INIS)

    Oh, Chang Young; Kim, Yun Jae; Oh, Young Jin; Song, Tae Kwang; Kim, Yong Beum; Oh, Young Jin; Song, Tae Kwang; Kim, Yong Beum

    2012-01-01

    Recently, stress corrosion cracking(SCC) have been found in dissimilar metal welds of nozzles in some pressurized water reactors and on low carbon stainless steel piping systems of boiling water reactors. The important factor of SCC is the residual stress field caused by weld. For the evaluation of crack growth analysis due to SCC, stress intensity factor under a residual stress field should be estimated. Several solutions for stress intensity factor under residual stress field were recommended in flaw assessment codes such as the American Society of Mechanical Engineers (ASME) Section XI, R6, American Petroleum Institute (API579). Some relevant works have been studied. Dong et al. evaluated stress intensity factors in welded structures. Miyazaki et al. estimated stress intensity factors of surface crack in simple stress fields. This paper presents a simple method to estimate stress intensity factors in welding residual stress field. For general application, results of structure integrity assessment codes KI solutions were compared Finite element analyses of welding simulation and cracked pipes are described. Comparison results of KI solutions and proposed simplified solution are presented in the works

  7. Modified stress intensity factor as a crack growth parameter applicable under large scale yielding conditions

    International Nuclear Information System (INIS)

    Yasuoka, Tetsuo; Mizutani, Yoshihiro; Todoroki, Akira

    2014-01-01

    High-temperature water stress corrosion cracking has high tensile stress sensitivity, and its growth rate has been evaluated using the stress intensity factor, which is a linear fracture mechanics parameter. Stress corrosion cracking mainly occurs and propagates around welded metals or heat-affected zones. These regions have complex residual stress distributions and yield strength distributions because of input heat effects. The authors previously reported that the stress intensity factor becomes inapplicable when steep residual stress distributions or yield strength distributions occur along the crack propagation path, because small-scale yielding conditions deviate around those distributions. Here, when the stress intensity factor is modified by considering these distributions, the modified stress intensity factor may be used for crack growth evaluation for large-scale yielding. The authors previously proposed a modified stress intensity factor incorporating the stress distribution or yield strength distribution in front of the crack using the rate of change of stress intensity factor and yield strength. However, the applicable range of modified stress intensity factor for large-scale yielding was not clarified. In this study, the range was analytically investigated by comparison with the J-integral solution. A three-point bending specimen with parallel surface crack was adopted as the analytical model and the stress intensity factor, modified stress intensity factor and equivalent stress intensity factor derived from the J-integral were calculated and compared under large-scale yielding conditions. The modified stress intensity was closer to the equivalent stress intensity factor when compared with the stress intensity factor. If deviation from the J-integral solution is acceptable up to 2%, the modified stress intensity factor is applicable up to 30% of the J-integral limit, while the stress intensity factor is applicable up to 10%. These results showed that

  8. Evaluation of stress intensity factors due to welding residual stresses for circumferential cracked pipes

    International Nuclear Information System (INIS)

    Oh, Chang-Young; Kim, Yun-Jae; Oh, Young-Jin; Kim, Jong-Sung; Song, Tae-Kwang; Kim, Yong-Beum

    2013-01-01

    To investigate the applicability of existing methods to estimate stress intensity factors due to welding residual stresses, comparisons with finite element (FE) solutions are made for two types of generic welding residual stress profiles, generated by simulating repair welds. It is found that fitting residual stresses over the crack depth using third-order polynomials gives good estimates of stress intensity factors but fitting over the entire thickness can result in inaccurate estimates even with fourth-order polynomials. Noting that welding residual stresses are often determined from FE analyses, linearization of residual stresses to estimate stress intensity factors is proposed. Comparison with FE solutions shows good agreements. -- Highlights: ► Applicability of K estimation methods is investigated for welding residual stresses. ► Two types of generic residual stress profiles with repair welds are considered. ► Fitting residual stresses over the crack depth gives good estimates of K. ► A method to estimate K by linearising residual stress profiles is proposed

  9. Weight functions for the determination of stress intensity factor and T-stress for edge-cracked plates with built-in ends

    International Nuclear Information System (INIS)

    Li, J.; Wang, X.; Tan, C.L.

    2004-01-01

    This paper presents the weight functions for the determination of the stress intensity factor and T-stress solutions for edge-cracked plates with built-in ends under complex stress distributions. First, a compliance analysis approach is used to calculate stress intensity factor and T-stress for edge cracks in finite width plates with built-in ends with uniform or linear stress distributions acting on the crack face. The results serve as the reference solutions for the next step in which the approaches of deriving weight functions from reference stress intensity factor and T-stress solutions developed for stress boundary conditions are extended to obtain the corresponding weight functions for edge-cracked plates with built-in ends. Finite element analysis is conducted to validate the derived solutions. The weight functions derived are suitable for obtaining stress intensity factors and T-stress solutions under any complex stress field

  10. Stress intensity factors and weight functions for cracks in front of notches

    International Nuclear Information System (INIS)

    Fett, T.

    1993-12-01

    The knowledge of stress intensity factors for cracks at notch roots is important for the fracture mechanical treatment of real components. Stress intensity factor solutions are available only for special notches and externally applied loads. For the treatment of more complex loadings as thermal stresses near the notch root the weight function is needed in addition. In the first part of this report weight functions for cracks in front of internal notches are derived from stress intensity factor solutions under external loading available in the literature. The second part deals with cracks in front of edge notches. Limit cases of stress intensity factors are derived which allow to estimate stress intensity factors for cracks in front of internal elliptical notches with arbitrary aspect ratio of the ellipse and for external notches. (orig.) [de

  11. Stress intensity factors and constant stress terms for interface cracks

    International Nuclear Information System (INIS)

    Fett, T.; Rizzi, G.

    2004-01-01

    In bi-material joints cracks can propagate along the interface or kink into one of the two materials. Whereas the energy release rate can be applied for interface cracks in the same way as usual for homogeneous materials, the computation of stresses in the vicinity of the crack tip is significantly more complicated. In order to assess crack kinking, it is necessary to know the mixed-mode stress intensity factor contributions K I and K II as well as the constant stress terms in the two materials. Whereas the stress intensity factors are available for a large number of infinite and semi-infinite bodies, there is experimental interest in practically used test specimens. This especially holds for the constant x-stress terms. Finite element computations are performed for the special case of a disappearing second Dundurs parameter, i.e. β=0. The fracture mechanics parameters K I , K II , σ 0 for the interface crack are reported in the form of diagrams and approximate relations. (orig.)

  12. Transient thermal stresses and stress intensity factors induced by thermal stratification in feedwater lines

    International Nuclear Information System (INIS)

    Sanchez Sarmiento, G.; Pardo, E.

    1985-01-01

    General analytical solutions for the thermal stresses and circumferential crack propagation in piping branches of nuclear power plants, that connect two circuits of the same fluid at different temperatures, are presented in this paper. Under certain conditions, two regions of the fluid possessing both temperatures with a separating layer of small thickness are formed ('flow stratification'). Dimensionless analytical expressions for the steady state temperature distribution in the pipe wall and the corresponding thermal stress are here derived, in terms of the basic geometrical and physical parameters. The position and thickness of the separating layer are considered as data of the model. Stress intensity ranges at any point of the tube wall are then determined. Finally, thermally induced stress intensity factors are calculated for hipothetically inside surface cracks. (orig.)

  13. Stress intensities in flawed pressure vessels

    International Nuclear Information System (INIS)

    Smith, C.W.; Jolles, M.; Peters, W.H.

    1977-01-01

    A technique for determining the stess intensity factor (SIF) near pressure vessel flaws or cracks experimentally from photoelastic data for use in two-dimensional problems was developed in the 1950's. This technique was modified and extended to a variety of two-dimensional problems. The technique has been refined further and what has evolved may be regarded as a hybrid technique which affects a marriage between ''frozen stress'' photoelastic results and a simple least-squares digital computer program for estimating SIF values in three-dimensional problems. This technique, in its original modified form, has been shown to be applicable to a study of surface flaws and the applicability of the method to complex crack body geometries of current technological importance are discussed. The analytical foundations of the method are reviewed

  14. Ki aikido: a solution to stress.

    Science.gov (United States)

    Wiles, L

    1990-03-10

    It is common knowledge that the life of the general dental practitioner is extremely stressful. Different dentists resort to various ways of unwinding--perhaps a game of golf, a sailing trip, or mending the odd clock as occupational therapy. These are all ways of getting away from the stress of day-to-day work--but perhaps the time has come to look for a more fundamental solution. How many dentists have considered taking up a martial art to alleviate the problem of stress? Here, we outline the background of ki aikido and its practical applications in daily life.

  15. Stress intensity factor analyses of surface cracks in three-dimensional structures

    International Nuclear Information System (INIS)

    Miyazaki, Noriyuki; Shibata, Katsuyuki; Watanabe, Takayuki; Tagata, Kazunori.

    1983-11-01

    The stress intensity factor analyses of surface cracks in various three-dimensional structures were performed using the finite element computer program EPAS-J1. The results obtained by EPAS-J1 were compared with other finite element solutions or results obtained by the simplified estimation methods. Among the simplified estimation methods, the equations proposed by Newman and Raju give the distributions of the stress intensity factor along a crack front, which were compared with the result obtained by EPAS-J1. It was confirmed by comparing the results that EPAS-J1 gives reasonable stress intensity factors of surface cracks in three-dimensional structures. (author)

  16. An experimental study on MRI signal intensity of albumin solution

    International Nuclear Information System (INIS)

    Ahn, In Oak; Chang, Kee Hyun; Han, Moon Hee; Song, Chi Sung; Yeon, Kyung Mo

    1990-01-01

    This in vitro study attempted to correlate magnetic resonance (MR) signal intensity with concentration of albumin solution in magnetic field strength of 2.0 Tesla (T) and 0.5T. MR imaging of bovine serum albumin solutions of various concentrations ranging from 0 to 40 g/dl was performed on both 2.0T and 0.5T MR units. The relative (with respect to normal saline) signal intensities of each albumin solution were measured in T1-weighted, proton density-weighted and T2-weighted MR images, correlated with albumin concentration on each pulse sequence, and compared between 2.0T and 0.5T. Additionally, the albumin concentrations showing signal intensities identical to those of white matter, cortical gray matter and cerebrospinal fluid (CSF) of normal brain MRI were determined by visual comparison of those images. 1. On T1-weighted (SE 400-500 msec/30 msec) images under 2.0T and 0.5T field strength, the signal intensity increased with increasing albumin concentrations up to about 30-35 g/dl and the decreased. For the solutions ranging from 0 to about 5 g/dl concentration, the signal intensities appeared isointense to normal saline on visual inspection. 2. On proton density-weighted (SE 2000-2500 msec/30 msec) images under 2.0T and 0.5T field strength, the signal intensity slightly increased with increasing albumin concentrations up to about 7.5-10 g/dl, and then gradually decreased. 3. On T2-weighted (SE 2000-2500 msec/80-100 msec) images under 2.0T and 0.5T field strength, the signal intensity slightly increased with increasing albumin concentrations up to about 7.5-10 g/dl, and then gradually decreased. Above the concentration of about 25-30 g/dl, the signal intensity appeared lower than that of normal saline on visual inspection. 4. Compared with the signal intensities of normal brain structures on T1-weighted images under 2.0T and 0.5T field strength, the signal intensities of the albumin solution below 2.5-5 g/dl concentration were similar to that of CSF, and those of

  17. Guideline for stress ulcer prophylaxis in the intensive care unit

    DEFF Research Database (Denmark)

    Madsen, Kristian Rørbaek; Lorentzen, Kristian; Clausen, Niels

    2014-01-01

    Stress ulcer prophylaxis (SUP) is commonly used in the intensive care unit (ICU), and is recommended in the Surviving Sepsis Campaign guidelines 2012. The present guideline from the Danish Society of Intensive Care Medicine and the Danish Society of Anesthesiology and Intensive Care Medicine sums...

  18. Extraversion and cardiovascular responses to recurrent social stress: Effect of stress intensity.

    Science.gov (United States)

    Lü, Wei; Xing, Wanying; Hughes, Brian M; Wang, Zhenhong

    2017-10-28

    The present study sought to establish whether the effects of extraversion on cardiovascular responses to recurrent social stress are contingent on stress intensity. A 2×5×1 mixed-factorial experiment was conducted, with social stress intensity as a between-subject variable, study phase as a within-subject variable, extraversion as a continuous independent variable, and cardiovascular parameter (HR, SBP, DBP, or RSA) as a dependent variable. Extraversion (NEO-FFI), subjective stress, and physiological stress were measured in 166 undergraduate students randomly assigned to undergo moderate (n=82) or high-intensity (n=84) social stress (a public speaking task with different levels of social evaluation). All participants underwent continuous physiological monitoring while facing two consecutive stress exposures distributed across five laboratory phases: baseline, stress exposure 1, post-stress 1, stress exposure 2, post-stress 2. Results indicated that under moderate-intensity social stress, participants higher on extraversion exhibited lesser HR reactivity to stress than participants lower on extraversion, while under high-intensity social stress, they exhibited greater HR, SBP, DBP and RSA reactivity. Under both moderate- and high-intensity social stress, participants higher on extraversion exhibited pronounced SBP and DBP response adaptation to repeated stress, and showed either better degree of HR recovery or greater amount of SBP and DBP recovery after stress. These findings suggest that individuals higher on extraversion exhibit physiological flexibility to cope with social challenges and benefit from adaptive cardiovascular responses. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Stress concentration factor and stress intensity factor on hard metals in connection with the wear characteristics

    International Nuclear Information System (INIS)

    Dawihl, W.; Altmeyer, G.

    1977-01-01

    Description of a method to determine stress intensity factors on hard metals by lapping in notches of different diameter. Dependence of the values of the stress intensity factors on the size of the notch base diameter. For tungsten carbide hard metals with 6% Co, determination of a final value of 250 Nmm -3 / 2 . Characterisation of the stress intensity factor governed by the surface roughness which is decisive for the assessment of the wear-resistant behaviour. (orig.) [de

  20. Use of frozen stress in extracting stress intensity factor distributions in three dimensional cracked body problems

    Science.gov (United States)

    Smith, C. W.

    1992-01-01

    The adaptation of the frozen stress photoelastic method to the determination of the distribution of stress intensity factors in three dimensional problems is briefly reviewed. The method is then applied to several engineering problems of practical significance.

  1. Numerical Determination of Crack Opening and Closure Stress Intensity Factors

    DEFF Research Database (Denmark)

    Ricardo, Luiz Carlos Hernandes

    2009-01-01

    The present work shows the numerical determination of fatigue crack opening and closure stress intensity factors of a C(T) specimen under variable amplitude loading using a finite element method. A half compact tension C(T) specimen, assuming plane stress constraint was used by finite element...

  2. Stress Concentration Factor and Stress Intensity Factor with U-notch and Crack in the Beam

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Bo Seong; Lee, Kwang Ho [Kyungpook National Univ., Daegu (Korea, Republic of)

    2016-05-15

    The stress concentration factors and stress intensity factors for a simple beam and a cantilever are analyzed by using finite element method and photoelasticity. Using the analyzed results, the estimated graphs on stress concentration factors and stress intensity factors are obtained. To analyze stress concentration factors of notch, the dimensionless notch length H(height of specimen)/h=1.1-2 and dimensionless gap space r(radius at the notch tip)/h=0.1~0.5 are used, where h=H-c and c is the notch length. As the notch gap length increases and the gap decreases, the stress concentration factors increase. Stress concentration factors of a simple beam are greater than those of a cantilever beam. However, actually, the maximum stress values under a load, a notch length and a gap occur more greatly in the cantilever beam than in the simple beam. To analyze stress intensity factors, the normalized crack length α(crack length)/H=0.2~0.5 is used. As the length of the crack increases, the normalized stress intensity factors increase. The stress intensity factors under a constant load and a crack length occur more greatly in the cantilever beam than in the simple beam.

  3. The maximum possible stress intensity factor for a crack in an unknown residual stress field

    International Nuclear Information System (INIS)

    Coules, H.E.; Smith, D.J.

    2015-01-01

    Residual and thermal stress fields in engineering components can act on cracks and structural flaws, promoting or inhibiting fracture. However, these stresses are limited in magnitude by the ability of materials to sustain them elastically. As a consequence, the stress intensity factor which can be applied to a given defect by a self-equilibrating stress field is also limited. We propose a simple weight function method for determining the maximum stress intensity factor which can occur for a given crack or defect in a one-dimensional self-equilibrating stress field, i.e. an upper bound for the residual stress contribution to K I . This can be used for analysing structures containing defects and subject to residual stress without any information about the actual stress field which exists in the structure being analysed. A number of examples are given, including long radial cracks and fully-circumferential cracks in thick-walled hollow cylinders containing self-equilibrating stresses. - Highlights: • An upper limit to the contribution of residual stress to stress intensity factor. • The maximum K I for self-equilibrating stresses in several geometries is calculated. • A weight function method can determine this maximum for 1-dimensional stress fields. • Simple MATLAB scripts for calculating maximum K I provided as supplementary material.

  4. Fathers' Stress in a Neonatal Intensive Care Unit

    DEFF Research Database (Denmark)

    Noergaard, Betty; Ammentorp, Jette; Garne, Ester

    2018-01-01

    BACKGROUND: Healthcare professionals in neonatal intensive care units (NICUs) tend to focus attention on the mothers and the newborn infants. Thus, fathers may find it difficult to establish an optimal father-child relationship and their stress may increase and persist during hospitalization...... and expect fathers to be involved, and support them to establish a father-child relationship, although they might become more stressed. IMPLICATIONS FOR RESEARCH: More adequate outcome measures are needed to determine the effect of interventions on paternal stress.This is an open-access article distributed....... PURPOSE: To investigate the impact of a more father-friendly NICU on paternal stress and their participation in childcare. METHODS: A quasiexperimental design was conducted on Danish-speaking fathers of newborn infants 28 or more weeks' gestational age. The Parental Stressor Scale: Neonatal Intensive Care...

  5. Guideline for stress ulcer prophylaxis in the intensive care unit

    DEFF Research Database (Denmark)

    Madsen, Kristian Rørbaek; Lorentzen, Kristian; Clausen, Niels

    2014-01-01

    Stress ulcer prophylaxis (SUP) is commonly used in the intensive care unit (ICU), and is recommended in the Surviving Sepsis Campaign guidelines 2012. The present guideline from the Danish Society of Intensive Care Medicine and the Danish Society of Anesthesiology and Intensive Care Medicine sums...... critically ill patients in the ICU outside the context of randomized controlled trials (GRADE 1C). No robust evidence supports recommendations for subpopulations in the ICU such as septic, burn, trauma, cardiothoracic or enterally fed patients. However, if SUP is considered clinically indicated in individual...

  6. Post-traumatic stress disorder in intensive care unit patients.

    Science.gov (United States)

    Caiuby, Andrea Vannini Santesso; Andreoli, Paola Bruno de Araújo; Andreoli, Sergio Baxter

    2010-03-01

    Post-traumatic stress disorder has been detected in patients after treatment in intensive care unit. The main goal of this study is to review the psychological aspects and therapeutic interventions on those patients after their treatment on intensive care unit. Thirty eight articles have been included. The prevalence of post-traumatic stress disorder has varied from 17% up to 30% and the incidence from 14% to 24%. The risk factors were: previous anxiety historic, depression or panic, having delusional traumatic memories (derived from psychic formations as dreams and delirium), belief effects, depressive behavior, stressing experiences and mechanical ventilation. High doses of opiates, symptoms caused by sedation or analgesia reduction and the use of lorazepam were related with the increase of delirium and delusional memory. The disorder sintomatology can be reduced with hydrocortisone administration, with daily sedation interruption. No other effectiveness psychological intervention study was found.

  7. Stressful life events and acute kidney injury in intensive and semi-intensive care unities.

    Science.gov (United States)

    Diniz, Denise Para; Marques, Daniella Aparecida; Blay, Sérgio Luis; Schor, Nestor

    2012-03-01

    Several studies point out that pathophysiological changes related to stress may influence renal function and are associated with disease onset and evolution. However, we have not found any studies about the influence of stress on renal function and acute kidney injury. To evaluate the association between stressful life events and acute kidney injury diagnosis, specifying the most stressful classes of events for these patients in the past 12 months. Case-control study. The study was carried out at Hospital São Paulo, in Universidade Federal de São Paulo and at Hospital dos Servidores do Estado de São Paulo, in Brazil. Patients with acute kidney injury and no chronic disease, admitted to the intensive or semi-intensive care units were included. Controls included patients in the same intensive care units with other acute diseases, except for the acute kidney injury, and also with no chronic disease. Out of the 579 patients initially identified, 475 answered to the Social Readjustment Rating Scale (SRRS) questionnaire and 398 were paired by age and gender (199 cases and 199 controls). The rate of stressful life events was statistically similar between cases and controls. The logistic regression analysis to detect associated effects of the independent variables to the stressful events showed that: increasing age and economic classes A and B in one of the hospitals (Hospital São Paulo - UNIFESP) increased the chance of a stressful life event (SLE). This study did not show association between the Acute Kidney Injury Group with a higher frequency of stressful life events, but that old age, higher income, and type of clinical center were associated.

  8. A definition and evaluation procedure of generalized stress intensity factors at cracks and multi-material wedges

    International Nuclear Information System (INIS)

    Song Chongmin

    2010-01-01

    A definition of generalized stress intensity factors is proposed. It is based on a matrix function solution for singular stress fields obtained from the scaled boundary finite-element method. The dimensions of the matrix are equal to the number of singular terms. Not only real and complex power singularities but also power-logarithmic singularities are represented in a unified expression without explicitly determining the type of singularity. The generalized stress intensity factors are evaluated directly from the definition by following standard stress recovery procedures in the finite element method. Numerical examples are presented to valid the definition and evaluation procedure.

  9. Stress intensity magnification factors for fully circumferential cracks in valve bodies (thick cylinders)

    International Nuclear Information System (INIS)

    Toor, P.M.

    1998-01-01

    The stress intensity solutions presented herein were obtained using an energy method in conjunction with a two-dimensional finite element program in order to explicitly account for curvature effect for fully circumferential cracks. The magnification factors for a specific crack depth were calculated by successively loading the crack surface by a uniform, linear, quadratic, and a cubic loading distribution. The magnification factors can be used to calculate the stress intensity factors by superposition method. The functions for each load condition in terms of radius to thickness ratio (R/t) and a fractional distance in terms of crack depth to thickness ratio (a/t) were developed. The validity of these functions is R/t = 1.5 to 10.0 and for 0.0125 ≤ a/t ≤ 0.8125. The functions agree to within 1% of the finite elements solutions for most magnification factors

  10. Corrosion under stress of AISI 304 steel in thiocyanate solutions

    International Nuclear Information System (INIS)

    Perillo, P.M.; Duffo, G.S.

    1989-01-01

    Corrosion susceptibility under stress of AISI 304 steel sensitized in a sodium thiocyanate solution has been studied and results were compared with those obtained with solutions of thiosulfate and tetrathionate. Sensitized steel type 304 is highly susceptible to corrosion when under intergranular stress (IGSCC) in thiocyanate solutions but the aggressiveness of this anion is less than that of the other sulphur anions studied (thiosulfate and tetrathionate). This work has been partly carried out in the Chemistry Department. (Author) [es

  11. Calculation of stress intensity factors for circumferential semi-elliptical cracks with high aspect ratio in pipes

    International Nuclear Information System (INIS)

    Zareei, A.; Nabavi, S.M.

    2016-01-01

    In this paper, stress intensity factors are calculated at the deepest point of an internal circumferential semi-elliptical crack in a pipe subjected to any arbitrary load. Based on the three dimensional finite element analysis, a weight function is proposed for high aspect ratio semi-elliptical cracks in pipes. An effective expression is developed analytically to evaluate the stress intensity factor using the weight function method. For several crack face stress fields and welding residual stress distributions, the weight function is validated against finite element data and those in the literature. Based on the comparison results, it can be concluded that the solution proposed in this paper is effective in engineering applications. - Highlights: • Analysis of internal circumferential semi-elliptical cracks with high aspect ratio in pipes. • A weight function is proposed for the calculation of the stress intensity factors for the deepest point of the crack. • An effective closed form expression is proposed to evaluate the stress intensity factors. • Prediction of stress intensity factors for any applied stress gradients through the wall thickness without any limitations. • A three-dimensional finite element modeling employs to calculate the stress intensity factors for different geometries.

  12. Stress ulcer prophylaxis in the intensive care unit

    DEFF Research Database (Denmark)

    Krag, Morten Brøgger; Perner, A; Wetterslev, J

    2013-01-01

    Stress ulcer prophylaxis (SUP) is regarded as standard of care in the intensive care unit (ICU). However, recent randomized, clinical trials (RCTs) and meta-analyses have questioned the rationale and level of evidence for this recommendation. The aim of the present systematic review was to evaluate...... incidence of gastrointestinal (GI) bleeding varies considerably. Data on the incidence and severity of GI bleeding in general ICUs in the developed world as of today are lacking. The best intervention for SUP is yet to be settled by balancing efficacy and harm. In essence, it is unresolved if intensive care...... patients benefit overall from SUP. The following clinically research questions are unanswered: (1) What is the incidence of GI bleeding, and which interventions are used for SUP in general ICUs today?; (2) Which criteria are used to prescribe SUP?; (3) What is the best SUP intervention?; (4) Do intensive...

  13. Stress ulcer prophylaxis in the intensive care unit trial

    DEFF Research Database (Denmark)

    Krag, M; Perner, A; Wetterslev, J

    2017-01-01

    BACKGROUND: In this statistical analysis plan, we aim to provide details of the pre-defined statistical analyses of the Stress Ulcer Prophylaxis in the Intensive Care Unit (SUP-ICU) trial. The aim of the SUP-ICU trial is to assess benefits and harms of stress ulcer prophylaxis with a proton pump......-year mortality, and a health economic analysis. Two formal interim analyses will be performed. The statistical analyses will be conducted according to the outlined pre-defined statistical analysis plan. The primary analysis will be a logistic regression analysis adjusted for stratification variables...... comparing the two intervention groups in the intention-to-treat population. In a secondary analysis, we will additionally adjust the primary outcome for potential random differences in baseline characteristics. The conclusion will be based on the intention-to-treat population. CONCLUSION: Stress ulcer...

  14. VR Mobile Solutions For Chronic Stress Reduction in Young Adults.

    Science.gov (United States)

    Gao, Kenneth; Boyd, Chelsie; Wiederhold, Mark D; Wiederhold, Brenda K

    2014-01-01

    Chronic stress in young adults has become a growing problem within recent decades and many are unable to find cost-effective and accessible treatment for psychological stress in their daily lives. We analyze the market of using a mobile application, Positive Technology, as a solution. Eleven participants, aged between 18 and 24, participated in the exercise. Self-reported stress reduction was measured via an online marketing survey, while physiological measurements were monitored via peripheral devices. Secondary goals assessed the app's ease-of-use, accessibility, and cost. Results indicate that participants enjoyed the availability of the mobile solution and found the app to be fun and easy to learn. Stress levels were reduced in 73% of the participants, with higher effects in females and in participants aged 18-24. We conclude that the mobile platform is an effective means of delivering psychological stress reduction, and could provide an accessible, cost-effective solution.

  15. Computation of principal stresses and stress intensity of a nozzle on a spherical pressure vessel

    International Nuclear Information System (INIS)

    Sun, B.C.; Lyow, B.L.; Koplik, B.

    1993-01-01

    This paper presents a Stress Computation Table that systematically computes the local stresses at various locations of the sphere-nozzle intersection. The six components of external loading are: radial load, two overturning moments, two horizontal shear forces, and a torsional moment. The radial and overturning moments induce local membrane and bending stresses in both the circumferential and meridional directions of the sphere around the nozzle. The shear forces and torsional moment produce local shear stresses. In addition, the shear forces induce local membrane and bending stresses around the nozzle. The local stress factors from each external loading component are taken from recent publications by Lyow, Sun and Koplik who have studied this subject through the use of the finite element method. These factors are a function of the nozzle-sphere geometrical parameters, beta, β, (nozzle radius/sphere radius) and gamma, γ, (sphere radius/thickness), with the beta value ranging from 0.1 to 0.5, and the gamma value ranging from 10 to 100. The Stress Table summarizes all the normal and shear stresses at eight different locations around the nozzle, and finally the principal stresses and stress intensity are computed. The stress factor plots from previous publications are replotted in this paper to provide a handy reference as well as consistency. A numerical sample employing a FORTRAN program is also given. (author)

  16. Posttraumatic stress in intensive care unit survivors - a prospective study

    DEFF Research Database (Denmark)

    Ratzer, Mette; Brink, Ole; Knudsen, Linda

    2014-01-01

    Aims: This study aimed to estimate the prevalence of severe Posttraumatic Stress Disorder (PTSD) symptoms and to identify factors associated with PTSD in survivors of intensive care unit (ICU) treatment following traumatic injury. Methods: Fifty-two patients who were admitted to an ICU through...... the emergency ward following traumatic injury were prospectively followed. Information on injury severity and ICU treatment were obtained through medical records. Demographic information and measures of acute stress symptoms, experienced social support, coping style, sense of coherence (SOC) and locus...... of control were assessed within one-month post-accident (T1). At the six months follow-up (T2), PTSD was assessed with the Harvard Trauma Questionnaire (HTQ). Results: In the six months follow-up, 10 respondents (19.2%) had HTQ total scores reaching a level suggestive of PTSD (N = 52), and 11 respondents (21...

  17. Noise, stress, and annoyance in a pediatric intensive care unit.

    Science.gov (United States)

    Morrison, Wynne E; Haas, Ellen C; Shaffner, Donald H; Garrett, Elizabeth S; Fackler, James C

    2003-01-01

    To measure and describe hospital noise and determine whether noise can be correlated with nursing stress measured by questionnaire, salivary amylase, and heart rate. Cohort observational study. Tertiary care center pediatric intensive care unit. Registered nurses working in the unit. None. Eleven nurse volunteers were recruited. An audiogram, questionnaire data, salivary amylase, and heart rate were collected in a quiet room. Each nurse was observed for a 3-hr period during patient care. Heart rate and sound level were recorded continuously; saliva samples and stress/annoyance ratings were collected every 30 mins. Variables assessed as potential confounders were years of nursing experience, caffeine intake, patients' Pediatric Risk of Mortality Score, shift assignment, and room assignment. Data were analyzed by random effects multiple linear regression using Stata 6.0. The average daytime sound level was 61 dB(A), nighttime 59 dB(A). Higher average sound levels significantly predicted higher heart rates (p =.014). Other significant predictors of tachycardia were higher caffeine intake, less nursing experience, and daytime shift. Ninety percent of the variability in heart rate was explained by the regression equation. Amylase measurements showed a large variability and were not significantly affected by noise levels. Higher average sound levels were also predictive of greater subjective stress (p =.021) and annoyance (p =.016). In this small study, noise was shown to correlate with several measures of stress including tachycardia and annoyance ratings. Further studies of interventions to reduce noise are essential.

  18. Stress Intensity Factor for Interface Cracks in Bimaterials Using Complex Variable Meshless Manifold Method

    Directory of Open Access Journals (Sweden)

    Hongfen Gao

    2014-01-01

    Full Text Available This paper describes the application of the complex variable meshless manifold method (CVMMM to stress intensity factor analyses of structures containing interface cracks between dissimilar materials. A discontinuous function and the near-tip asymptotic displacement functions are added to the CVMMM approximation using the framework of complex variable moving least-squares (CVMLS approximation. This enables the domain to be modeled by CVMMM without explicitly meshing the crack surfaces. The enriched crack-tip functions are chosen as those that span the asymptotic displacement fields for an interfacial crack. The complex stress intensity factors for bimaterial interfacial cracks were numerically evaluated using the method. Good agreement between the numerical results and the reference solutions for benchmark interfacial crack problems is realized.

  19. Effects of distance from center of a weld to fixed end on residual stress and stress intensity factor of a piping weld. Evaluation of SCC growth under residual stress field. Report 1

    International Nuclear Information System (INIS)

    Miyazaki, Katsumasa; Numata, Masanori; Saito, Koichi; Mochizuki, Masahito

    2006-01-01

    The fixed conditions of butt welds between straight pipe and valve or pump in the actual piping system are different from those of straight pipes. However, the effect of fixed condition on the residual stress and the stress intensity factor for evaluation of structural integrity of cracked piping was not clear. In this study, the finite element analyses were conducted by considering the differences in the distance from the center of weld to the fixed end L to clarify the effect of fixed condition on the residual stress and the stress intensity factor. For the 600 A piping, the axial residual stress distribution was not affected by the distance L. Furthermore, the stress intensity factor of circumferential crack under the residual stress field with fixed condition could be estimated by using the existing simplified solution for piping. (author)

  20. Chemical milling solution reveals stress corrosion cracks in titanium alloy

    Science.gov (United States)

    Braski, D. N.

    1967-01-01

    Solution of hydrogen flouride, hydrogen peroxide, and water reveals hot salt stress corrosion cracks in various titanium alloys. After the surface is rinsed in water, dried, and swabbed with the solution, it can be observed by the naked eye or at low magnification.

  1. Determinants of stress for staff in a neonatal intensive care unit.

    OpenAIRE

    Astbury, J; Yu, V Y

    1982-01-01

    Components of stress for 22 paediatric consultants and 29 nursing sisters working in neonatal intensive care units were studied. Ten situations were rated for their intensity of stress and their frequency of occurrence. For intensity of stress, significantly more paediatric consultants rated the competing demands of personal life versus work as highly stressful, than did nursing sisters. For frequency of stress, significantly more paediatric consultants rated 4 situations as frequently occurr...

  2. A plastic stress intensity factor approach to turbine disk structural integrity assessment

    Directory of Open Access Journals (Sweden)

    V. Shlyannikov

    2016-07-01

    Full Text Available This study based on a new fracture mechanics parameter is concerned with assessing the integrity of cracked steam turbine disk which operate under startup-shutdown cyclic loading conditions. Damage accumulation and growth in service have occurred on the inner surface of slot fillet of key. In order to determine elastic-plastic fracture mechanics parameters full-size stress-strain state analysis of turbine disk was performed for a quote-elliptical part-through cracks under considering loading conditions. As a result distributions of elastic and plastic stress intensity factors along crack front in slot fillet of key of turbine disk depending on surface crack form are defined. An engineering approach to the prediction of carrying capacity of cracked turbine disk which is sensitive to the loading history at maintenance is proposed. The predictions of the rate of crack growth and residual lifetime of steam turbine disk are compared for elastic and elastic-plastic solutions. It is shown that the previously proposed elastic crack growth models provide overestimate the lifetime with respect to the present one. An advantage to use the plastic stress intensity factor to characterize the fracture resistance as the self-dependent unified parameter for a variety of turbine disk configurations rather than the magnitude of the elastic stress intensity factors alone is discussed.

  3. Thermal stress intensity factor for an axial crack in a clad cylinder

    International Nuclear Information System (INIS)

    Kuo, An Yu; Deardorf, A.F.; Riccardella, P.C.

    1993-01-01

    Many clad pressure vessels have been found to have cracks running through the inside surface cladding and into the base material. Although Young's moduli and Poisson's ratios of the clad and base materials are about the same for most of the industrial applications, coefficients of thermal expansion of the two dissimilar materials, clad and base materials, are usually quite different. For example, low alloy ferritic steel is a common base material for reactor pressure vessels (RPV) and the vessels are usually clad with austenitic stainless steel. Young's moduli for the low alloy steel and stainless steel at 350 F are 29,000 ksi and 28,000 ksi, respectively, while their coefficients of thermal expansion are 7.47x10 -6 in/in and 9.50x10 -6 in/in-degree F, respectively. The mismatch in coefficients of thermal expansion will cause high residual thermal stress even when the entire vessel is at a uniform temperature. This residual stress is one of the primary reasons why so many cracks have been found in the cladded components. In performing reactor pressure vessel integrity evaluation, such as computing probability of brittle fracture of the RPV, it is necessary to calculate stress intensity factors for cracks, which initiate from the clad material and run into the base metal. This paper presents a convenient method of calculating stress intensity factor for an axial crack emanating from the inside surface of a cladded cylinder under thermal loading. A J-integral like line integral was derived and used to calculate the stress intensity factors from finite element stress solutions of the problem

  4. A study on CT attenuation and MR signal intensity of protein solution

    International Nuclear Information System (INIS)

    Kim, Joung Hae; Choi, Dae Seob; Kim, Soon; Lee, Hyeon Kyeong; Oh, Hyeon Hee; Kim, Seung Hyeon; Lee, Sung Woo; Chang, Kee Hyun; Chung, Jun Ho

    2001-01-01

    To correlate CT attenuation and MR signal intensity with concentration of protein solution. CT and MR examinations of a phantom containing bovine serum albumin solutions of various concentrations ranging from 0 to 55% were performed. CT Hounsfield units(HUs), MR signal intensities, and apparent diffusion coefficients (ADCs) of each albumin solution were measured, and CT HUs and MR signal intensities of the solutions were compared with those of cerebrospinal fluid (CSF), white matter, and cortical gray matter. CT HU increased gradually with increasing albumin concentration. On T1-weighted images(T1WI), signal intensity increased with increasing albumin concentrations of up to 35% but then decreased. On T2-weighted images(T2Wl), gradually decreasing signal intensity and increasing albumin concentration were observed Fluid-attenuated inversion recovery (FLAIR) and diffusion-weighted images (DWls) showed that signal intensity peaked at a concentration of 10% and then gradually decreased. The ADC of the solution gradually decreased as concentration increased. Compared with those of normal brain structures, the CT HUs of solutions at concentrations of over 20% were higher than those of white and gray matter. At T1WI, the signal intensities of 10-45% solutions were similar to or higher than that of the gray matter. At T2Wl, the signal intensities of solutions above 25, 35, and 40% were lower than those of CSF, gray matter, and white matter, respectively. FLAIR images showed that the signal intensities of 5-35% solutions were higher than that of gray matter. The CT attenuation of albumin solution increased gradually with increasing concentration. MR signal intensities peaked at 35% concentration on T1WI and at 10% on FLAIR and DW images, respectively, and then gradually decreased. T2Wl and ADC map images showed gradually decreasing signal intensity and ADC as albumin concentration increased

  5. Oxidative stress does not influence local sweat rate during high-intensity exercise.

    Science.gov (United States)

    Meade, Robert D; Fujii, Naoto; Poirier, Martin P; Boulay, Pierre; Sigal, Ronald J; Kenny, Glen P

    2018-02-01

    What is the central question of this study? We evaluated whether oxidative stress attenuates the contribution of nitric oxide to sweating during high-intensity exercise. What is the main finding and its importance? In contrast to our previous report of an oxidative stress-mediated reduction in nitric oxide-dependent cutaneous vasodilatation in this cohort during intense exercise, we demonstrated no influence of local ascorbate administration on the sweating response during moderate- (∼51% peak oxygen uptake) or high-intensity exercise (∼72% peak oxygen uptake). These new findings provide important mechanistic insight into how exercise-induced oxidative stress impacts sudomotor activity. Nitric oxide (NO)-dependent sweating is diminished during high- but not moderate-intensity exercise. We evaluated whether this impairment stems from increased oxidative stress during high-intensity exercise. On two separate days, 11 young (24 ± 4 years) men cycled in the heat (35°C) at a moderate [500 W; 52 ± 6% peak oxygen uptake (V̇O2 peak )] or high (700 W; 71 ± 5% V̇O2 peak ) rate of metabolic heat production. Each session included two 30 min exercise bouts separated by a 20 min recovery period. Local sweat rate was monitored at four forearm skin sites continuously perfused via intradermal microdialysis with the following: (i) lactated Ringer solution (Control); (ii) 10 mm ascorbate (Ascorbate; non-selective antioxidant); (iii) 10 mm N G -nitro-l-arginine methyl ester (l-NAME; NO synthase inhibitor); or (iv) 10 mm ascorbate plus 10 mm l-NAME (Ascorbate + l-NAME). During moderate exercise, sweat rate was attenuated at the l-NAME and Ascorbate + l-NAME sites (both ∼1.0 mg min -1  cm -2 ; all P < 0.05) but not at the Ascorbate site (∼1.1 mg min -1  cm -2 ; both P ≥ 0.28) in comparison to the Control site (∼1.1 mg min -1  cm -2 ). However, no differences were observed between treatment sites (∼1.4 mg min -1  cm -2 ; P = 0

  6. Stress ulcer prophylaxis in the intensive care unit

    DEFF Research Database (Denmark)

    Krag, M; Perner, A; Wetterslev, J

    2015-01-01

    BACKGROUND: Stress ulcer prophylaxis (SUP) may decrease the incidence of gastrointestinal bleeding in patients in the intensive care unit (ICU), but the risk of infection may be increased. In this study, we aimed to describe SUP practices in adult ICUs. We hypothesised that patient selection...... for SUP varies both within and between countries. METHODS: Adult ICUs were invited to participate in the survey. We registered country, type of hospital, type and size of ICU, preferred SUP agent, presence of local guideline, reported indications for SUP, criteria for discontinuing SUP, and concerns about...... adverse effects. Fisher's exact test was used to assess differences between groups. RESULTS: Ninety-seven adult ICUs in 11 countries participated (eight European). All but one ICU used SUP, and 64% (62/97) reported having a guideline for the use of SUP. Proton pump inhibitors were the most common SUP...

  7. Growth of marine yeast on different strength of stress solutes

    Digital Repository Service at National Institute of Oceanography (India)

    Gupta, R.

    tested against the stress solutes NaCl (0-16%), potassium chloride (KCl) and sodium sulphate (Na sub(2) SO sub(4)) at 0.4%, 4% and 8% concentrations. D. hansenii and D. marama were the most versatile isolates exhibiting excellent growth in all...

  8. Intensity of anxiety is modified via complex integrative stress circuitries.

    Science.gov (United States)

    Smith, Justin P; Prince, Melissa A; Achua, Justin K; Robertson, James M; Anderson, Raymond T; Ronan, Patrick J; Summers, Cliff H

    2016-01-01

    Escalation of anxious behavior while environmentally and socially relevant contextual events amplify the intensity of emotional response produces a testable gradient of anxiety shaped by integrative circuitries. Apprehension of the Stress-Alternatives Model apparatus (SAM) oval open field (OF) is measured by the active latency to escape, and is delayed by unfamiliarity with the passageway. Familiar OF escape is the least anxious behavior along the continuum, which can be reduced by anxiolytics such as icv neuropeptide S (NPS). Social aggression increases anxiousness in the SAM, reducing the number of mice willing to escape by 50%. The apprehension accompanying escape during social aggression is diminished by anxiolytics, such as exercise and corticotropin releasing-factor receptor 1 (CRF1) antagonism, but exacerbated by anxiogenic treatment, like antagonism of α2-adrenoreceptors. What is more, the anxiolytic CRF1 and anxiogenic α2-adrenoreceptor antagonists also modify behavioral phenotypes, with CRF1 antagonism allowing escape by previously submissive animals, and α2-adrenoreceptor antagonism hindering escape in mice that previously engaged in it. Gene expression of NPS and brain-derived neurotrophic factor (BDNF) in the central amygdala (CeA), as well as corticosterone secretion, increased concomitantly with the escalating anxious content of the mouse-specific anxiety continuum. The general trend of CeA NPS and BDNF expression suggested that NPS production was promoted by increasing anxiousness, and that BDNF synthesis was associated with learning about ever-more anxious conditions. The intensity gradient for anxious behavior resulting from varying contextual conditions may yield an improved conceptualization of the complexity of mechanisms producing the natural continuum of human anxious conditions, and potential therapies that arise therefrom. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Oxidative stress and antioxidant responses to progressive resistance exercise intensity in trained and untrained males

    OpenAIRE

    H Çakır-Atabek; F Özdemir; R Çolak

    2015-01-01

    The relationship between oxidative stress and some exercise components of resistance exercise (e.g. intensity, exercise volume) has not been clearly defined. Additionally, the oxidative stress markers may respond differently in various conditions. This study aims to determine the effects of progressive intensity of resistance exercise (RE) on oxidative stress and antioxidants in trained and untrained men, and also to investigate the possible threshold intensity required to evoke oxidative str...

  10. Comparison of gravimetric and mantle flow solutions for sub-lithopsheric stress modeling and their combination

    Science.gov (United States)

    Eshagh, Mehdi; Steinberger, Bernhard; Tenzer, Robert; Tassara, Andrés

    2018-05-01

    Based on Hager and O'Connell's solution to mantle flow equations, the stresses induced by mantle convection are determined using the density and viscosity structure in addition to topographic data and a plate velocity model. The solution to mantle flow equations requires the knowledge of mantle properties that are typically retrieved from seismic information. Large parts of the world are, however, not yet covered sufficiently by seismic surveys. An alternative method of modeling the stress field was introduced by Runcorn. He formulated a direct relation between the stress field and gravity data, while adopting several assumptions, particularly disregarding the toroidal mantle flow component and mantle viscosity variations. A possible way to overcome theoretical deficiencies of Runcorn's theory as well as some practical limitations of applying Hager and O'Connell's theory (in the absence of seismic data) is to combine these two methods. In this study, we apply a least-squares analysis to combine these two methods based on the gravity data inversion constraint on mantle flow equations. In particular, we use vertical gravity gradients from the Gravity field and steady state Ocean Circulation Explorer that are corrected for the gravitational contribution of crustal density heterogeneities prior to applying a localized gravity-gradient inversion. This gravitational contribution is estimated based on combining the Vening Meinesz-Moritz and flexural isostatic theories. Moreover, we treat the non-isostatic effect implicitly by applying a band-limited kernel of the integral equation during the inversion. In numerical studies of modeling, the stress field within the South American continental lithosphere we compare the results obtained after applying Runcorn and Hager and O'Connell's methods as well as their combination. The results show that, according to Hager and O'Connell's (mantle flow) solution, the maximum stress intensity is inferred under the northern Andes

  11. The physical interpretation of the threshold-stress intensity range during fatigue loading

    International Nuclear Information System (INIS)

    Marci, G.; Bazant, E.

    1977-01-01

    Based on the experimental results, the threshold-stress intensity range is given the physical interpretation that it characterizes a range of effective tensile stresses which need to be exceeded during a loading cycle for stage II fatigue crack growth to occur. The threshold stress intensity range is independent from its relative position in the range of effective tensile stress, has always the same magnitude and, furthermore, is independent of the Ksub(Imax) which produced the active plastic zone. The experimental results available from previous threshold stress intensity determinations are in good agreement with the concept developed. (orig.) [de

  12. Stress corrosion cracking of duplex stainless steels in caustic solutions

    Science.gov (United States)

    Bhattacharya, Ananya

    Duplex stainless steels (DSS) with roughly equal amount of austenite and ferrite phases are being used in industries such as petrochemical, nuclear, pulp and paper mills, de-salination plants, marine environments, and others. However, many DSS grades have been reported to undergo corrosion and stress corrosion cracking in some aggressive environments such as chlorides and sulfide-containing caustic solutions. Although stress corrosion cracking of duplex stainless steels in chloride solution has been investigated and well documented in the literature but the SCC mechanisms for DSS in caustic solutions were not known. Microstructural changes during fabrication processes affect the overall SCC susceptibility of these steels in caustic solutions. Other environmental factors, like pH of the solution, temperature, and resulting electrochemical potential also influence the SCC susceptibility of duplex stainless steels. In this study, the role of material and environmental parameters on corrosion and stress corrosion cracking of duplex stainless steels in caustic solutions were investigated. Changes in the DSS microstructure by different annealing and aging treatments were characterized in terms of changes in the ratio of austenite and ferrite phases, phase morphology and intermetallic precipitation using optical micrography, SEM, EDS, XRD, nano-indentation and microhardness methods. These samples were then tested for general and localized corrosion susceptibility and SCC to understand the underlying mechanisms of crack initiation and propagation in DSS in the above-mentioned environments. Results showed that the austenite phase in the DSS is more susceptible to crack initiation and propagation in caustic solutions, which is different from that in the low pH chloride environment where the ferrite phase is the more susceptible phase. This study also showed that microstructural changes in duplex stainless steels due to different heat treatments could affect their SCC

  13. [Post-traumatic stress disorder-related to intensive care stay: influence of sedation practices].

    Science.gov (United States)

    Bauerheim, Nadège; Masseret, Elodie; Mercier, Emmanuelle; Dequin, Pierre-François; El-Hage, Wissam

    2013-03-01

    The stay in intensive care unit can be potentially traumatic at the origin of post-traumatic stress symptoms. The severity of post-traumatic stress symptoms is linked to the intensity and the type of traumatic memories of the intensive care stay. Sedatives and analgesics given to ventilated patients in intensive care influence the traumatic memory. The level, the duration and the type of sedation-analgesia protocol are risk factors of post-traumatic stress symptoms. Links between sedation, dissociative symptoms, delirium and post-traumatic stress symptoms are documented. Environmental and pharmacological measures are to be considered to reduce the traumatic potential risk of the intensive care. Intensive care caregivers, liaison-psychiatrist and general practitioner have each a specific role to play in the screening of the post-traumatic stress symptoms. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

  14. Stress intensity factors of corner cracks in two nozzle-cylinder intersections

    International Nuclear Information System (INIS)

    Kobayashi, A.S.; Polvanich, N.; Emery, A.F.; Love, W.J.

    1977-01-01

    In a recent paper, the authors presented the stress-intensity-magnification factors of a quarter-elliptical surface crack in a quarter-infinite solid and a circular crack approaching a reentry corner in a three-quarter infinite solid. These stress-intensity-magnification factors were used together with a curvature-correction factor to estimate the stress-intensity factor of a corner crack at a nozzle-cylinder intersection. Through appropriate superposition of the above stress-intensity-magnification factors, stress-intensity factors for hypothetical corner cracks at a nozzle-cylinder intersection subjected to internal pressure and transient thermal-stress loadings can be obtained. A description of a computer code based on this procedure as well as its applications in analyzing two corner-crack problems at a nozzle-cylinder intersection are discussed in this paper

  15. Stress intensity factors of corner cracks in two nozzle-cylinder interactions

    International Nuclear Information System (INIS)

    Kobayashi, A.S.; Polvanich, N.; Emery, A.F.; Love, W.J.

    1977-01-01

    In a recent paper, the authors presented the stress-intensity-magnification factors of a quarter-elliptical surface crack in a quarter-infinite solid and a circular crack approaching a reentry corner in a three-quarter infinite solid. These stress-intensity-magnification factors were used together with a curvature-correction factor to estimate the stress-intensity factor of a corner crack at a nozzle-cylinder interaction. Through appropriate superposition of the above stress-intensity-magnification factors, stress-intensity factors for hypothetical corner cracks at a nozzle-cylinder intersection subjected to internal pressure and transient thermal-stress loadings can be obtained. A description of a computer code based on this procedure as well as its applications in analyzing two corner-crack probems at a nozzle-cylinder intersection are discussed in this paper. (Auth.)

  16. Researching design solutions for frames of buildings in case of increased seismic intensity in specific zones

    OpenAIRE

    Panasyuk Leonid; Kravchenko Galina; Trufanova Elena

    2017-01-01

    Currently, there is a trend to increase the estimated seismic hazard for construction sites. With this, the buildings erected under the previously valid norms have the lesser hazard resistance. The present article inquiries into an issue of how the design solutions affect the safety of the building change under the increased seismic intensity. This article represents the calculation of a building without regard to seismic intensity and the same was made for a rate-7 seismic intensity district...

  17. Effects of overload on the threshold stress intensity factor for SCC

    International Nuclear Information System (INIS)

    Takahashi, Koji; Ando, Kotoji; Miyazaki, Yuji; Hashikura, Yasuaki

    2009-01-01

    The effects of overload on the threshold stress intensity factor for stress corrosion crack (K ISCC ) of stainless steel were studied. Tensile overload was applied to a wedge opening loaded (WOL) specimen of SUS316. Then, SCC tests were carried out to determine the resultant K ISCC . As a result, the apparent value of K ISCC increases as increasing a stress intensity factor by tensile overload (K OV ). The effects of tensile overload on K ISCC and the threshold stress intensity factor range for fatigue (ΔK th ) were compared. It was found that the effects of tensile overload on K ISCC were larger than that on ΔK th . (author)

  18. Stress intensity factors for underclad and through clad defects in a reactor pressure vessel submitted to a pressurised thermal shock

    International Nuclear Information System (INIS)

    Marie, S.; Menager, Y.; Chapuliot, S.

    2005-01-01

    CEA has launched important work on the development of a Stress Intensity Factors compendium for cracks in a Reactor Pressure Vessel (RPV) taking into account the cladding. The work is performed by Finite Element analysis with a parametric mesh for two types of defects (under clad defect and through clad defect) and a wide range of geometrical and material parameters. In addition, an analytical stress solution for Pressurised Thermal Shock (PTS) on the RPV is proposed to allow a complete analytical estimation of the stress intensity factor K I for the PTS problem. The results are validated by comparison with a complete 3D finite element calculation performed on a complex and realistic case study

  19. Stress corrosion cracking of austenitic stainless steel in glycerol solution and chloride solution at elevated temperature

    International Nuclear Information System (INIS)

    Haftirman; Maruhum Tua Lubis

    2009-01-01

    Stress Corrosion Cracking (SCC) is an environmentally assisted failure caused by exposure to a corrodant while under a sustained tensile stress. SCC is most often rapid, unpredictable and catastrophic. Failure can occur in as little as a few hours or take years to happen. Most alloys are susceptible to SCC in one or more environments requiring careful consideration of alloy type in component design. In aqueous chloride environments austenitic stainless steels and many nickel based alloys are known to perform poorly. One of products Oleo chemical is glycerol solution. Glycerol solution contains chloride with concentration 50 ppm - 150 ppm. Austenitic stainless steel is usually used in distillation construction tank and pipe line of glycerol. Material AISI 304 will be failure in this glycerol solution with this concentration in 5 years. In production process, concentration of chloride in glycerol becomes more than 150 ppm at temperature 150 degree Celsius. The reason is that the experiment I conducted in high chloride with concentration such as 6000 ppm, 9000 ppm, and 12000 ppm. The stress corrosion cracking of the austenitic stainless steels of types AISI 304, 316 and 316L in glycerol solution at elevated temperature 150 degree Celsius is investigated as a function variation of chloride concentration, namely 50, 6000, 9000 and 12000 ppm using a constant load method with two kinds of initial tensile stress as 50 % and 70 % yield strength. The experiment uses a spring loaded fixture type and is based on ASTM G49 for experiment method, and E292 for geometry of specimen. Pitting corrosion occurs on the surface specimen until the stress level reaches the ultimate strength. Pitting corrosion attack and depletion occur on the surface as initiation of SCC failure as the stress reaches the ultimate strength. Failure has occurred in catastrophic brittle fracture type of transgranular. AISI 304 was more susceptible for all conditions. In chloride solution with concentration of

  20. Transient Stress Intensity Factors of Functionally Graded Hollow Cylinders with Internal Circumferential Cracks

    Directory of Open Access Journals (Sweden)

    Iman Eshraghi

    Full Text Available Abstract In this paper, transient thermomechanical stress intensity factors for functionally graded cylinders with complete internal circumferential cracks are obtained using the weight function method. The finite difference method is used to calculate the time dependent temperature distribution and thermal stresses along the cylinder thickness. Furthermore, finite element analysis is performed to determine the weight function coefficients and to investigate the accuracy of the predicted stress intensity factors from the weight functions. Variation of the stress intensity factors with time and effects of the material gradation on the results are investigated, as well. It is shown that the proposed technique can be used to accurately predict transient thermomechanical stress intensity factors for functionally graded cylinders with arbitrary material gradation.

  1. Effect of Couple Stresses on the Stress Intensity Factors for Two Parallel Cracks in an Infinite Elastic Medium under Tension

    Directory of Open Access Journals (Sweden)

    Shouetsu Itou

    2012-01-01

    Full Text Available Stresses around two parallel cracks of equal length in an infinite elastic medium are evaluated based on the linearized couple-stress theory under uniform tension normal to the cracks. Fourier transformations are used to reduce the boundary conditions with respect to the upper crack to dual integral equations. In order to solve these equations, the differences in the displacements and in the rotation at the upper crack are expanded through a series of functions that are zero valued outside the crack. The unknown coefficients in each series are solved in order to satisfy the boundary conditions inside the crack using the Schmidt method. The stresses are expressed in terms of infinite integrals, and the stress intensity factors can be determined using the characteristics of the integrands for an infinite value of the variable of integration. Numerical calculations are carried out for selected crack configurations, and the effect of the couple stresses on the stress intensity factors is revealed.

  2. Behavioral Predictors of Acute Stress Symptoms During Intense Military Training

    Science.gov (United States)

    2009-06-01

    the Ways of Coping Scale ( Folkman & Lazarus , 1988). During survival training, the Clinician- Administered Dissociative States Scale (Bremner et al...Published on behalf of the International Society for Traumatic Stress Studies. Acute Stress Symptoms 217 Folkman , S., & Lazarus , R. (1988). Manual...and performance in sport (pp. 17–42). Chichester, UK: Wiley. Lazarus , R. S. (2000). Cognitive-motivational-relational theory of emotion. In Y . Hanin

  3. Stress-intensity factor equations for cracks in three-dimensional finite bodies

    Science.gov (United States)

    Newman, J. C., Jr.; Raju, I. S.

    1981-01-01

    Empirical stress intensity factor equations are presented for embedded elliptical cracks, semi-elliptical surface cracks, quarter-elliptical corner cracks, semi-elliptical surface cracks at a hole, and quarter-elliptical corner cracks at a hole in finite plates. The plates were subjected to remote tensile loading. Equations give stress intensity factors as a function of parametric angle, crack depth, crack length, plate thickness, and where applicable, hole radius. The stress intensity factors used to develop the equations were obtained from three dimensional finite element analyses of these crack configurations.

  4. Numerical evaluation of stress intensity factor for vessel and pipe subjected to thermal shock

    International Nuclear Information System (INIS)

    Kim, Y.W.; Lee, H.Y.; Yoo, B.

    1994-01-01

    The thermal weight function method and the finite element method were employed in the numerical computation of the stress intensity factor for a cracked vessel and the cracked pipe subjected to thermal shock. A wall subjected to thermal shock was analyzed, and it has been shown that the effect of thermal shock on the stress intensity factor is dominant for the crack with small crack length to thickness ratio. Convection at the crack face had an influence on the stress intensity factor in the early stage of thermal shock. (Author)

  5. Calculation of mixed mode stress intensity factors using an alternating method

    International Nuclear Information System (INIS)

    Sakai, Takayuki

    1999-01-01

    In this study, mixed mode stress intensity factors (K I and K II ) of a square plate with a notch were calculated using a finite element alternating method. The obtained results were compared with the ones by a finite element method, and it was shown that the finite element alternating method can accurately estimate mixed mode stress intensity factors. Then, using this finite element alternating method, mixed mode stress intensity factors were calculated as changing the size and position of the notch, and its simplified equations were proposed. (author)

  6. Soft solution synthesis and intense visible photoluminescence of lamellar zinc oxide hybrids

    International Nuclear Information System (INIS)

    Sağlam, Özge

    2013-01-01

    Graphical abstract: -- In this study, we demonstrate the synthesis of layered zinc oxide films intercalated with dodecyl sulphate ions by a simple soft solution process. The presence of potassium (K + ) and lithium (Li + ) ions in the precursor solution of layered zinc hydroxide resulted in lamellar hybrid zinc oxide films instead of layered zinc hydroxides. On the other hand, the addition of nickel phthalocyanine induces zinc hydroxide host layers which exhibit an intense blue emission. This is also promoted by K + and Li + ions

  7. Stress ulcer prophylaxis in the intensive care unit

    DEFF Research Database (Denmark)

    Krag, Mette; Perner, Anders; Møller, Morten H

    2016-01-01

    PURPOSE OF REVIEW: Stress ulcer prophylaxis (SUP) is considered standard of care in the majority of critically ill patients in the ICU. In this review, we will present the current evidence for the use of SUP in ICU patients, including data on the prevalence of gastrointestinal bleeding and the ba......PURPOSE OF REVIEW: Stress ulcer prophylaxis (SUP) is considered standard of care in the majority of critically ill patients in the ICU. In this review, we will present the current evidence for the use of SUP in ICU patients, including data on the prevalence of gastrointestinal bleeding...

  8. Analysis of stress intensity factor for a Griffith crack opened under constant pressure in a plate with temperature dependent properties

    International Nuclear Information System (INIS)

    Hata, Toshiaki

    1982-01-01

    Recently, the research on the thermal stress of structural materials has become important with the progress of nuclear reactor technology. In the case of large temperature gradient, the change of the physical properties of materials must be taken into account. The thermal stress analysis for the things with cracks taking the temperature dependence of properties into account has scarcely been carried out. In this report, the general method of solution of three-dimensional problems using perturbation method and the extension of thermo-elastic displacement potential method is shown for the case in which Young's modulus changes according to the exponential function of temperature. Moreover, using this method, the effect of the temperature dependence of properties on the stress intensity factor of the cracks subjected to internal pressure in a strip exposed to linear thermal flow was clarified. In the analysis, Young's modulus, the coefficient of linear thermal expansion and thermal conductivity were assumed to be dependent on temperature. The method of solution, the analysis of stress intensity factor considering the change of properties due to temperature, and the numerical calculation for a square plate with a crack are explained. (Kako, I.)

  9. Dynamic stress intensity factors for a longitudinal semi-elliptical ...

    African Journals Online (AJOL)

    elliptical crack in a thick-walled cylinder subjected to transient dynamic stresses. First, the problem of dynamic elasticity in a thick-walled cylinder is solved analytically using the finite Hankel transform. Transient pressure is assumed to act on ...

  10. Symptoms of Posttraumatic Stress after Intensive Care Delirium

    DEFF Research Database (Denmark)

    Svenningsen, Helle; Egerod, Ingrid; Christensen, Doris

    2015-01-01

    Introduction. Long-term psychological consequences of critical illness are receiving more attention in recent years. The aim of our study was to assess the correlation of ICU-delirium and symptoms of posttraumatic stress disorder (PTSD) anxiety and depression after ICU-discharge in a Danish cohort...

  11. Social stress induces high intensity sleep in rats

    NARCIS (Netherlands)

    Meerlo, P; Pragt, Bertrand J.; Daan, S

    1997-01-01

    We studied the effect of social stress on sleep electroencephalogram (EEG) in rats. Animals were subjected to a single social defeat by introducing them in the cage of an aggressive male conspecific for 1 h. The animals responded to the social conflict by a sharp increase in EEG slow-wave activity

  12. Neonatal Intensive Care Unit Nurses Working in an Open Ward: Stress and Work Satisfaction.

    Science.gov (United States)

    Lavoie-Tremblay, Mélanie; Feeley, Nancy; Lavigne, Geneviève L; Genest, Christine; Robins, Stéphanie; Fréchette, Julie

    2016-01-01

    There is some research on the impact of open-ward unit design on the health of babies and the stress experienced by parents and nurses in neonatal intensive care units. However, few studies have explored the factors associated with nurse stress and work satisfaction among nurses practicing in open-ward neonatal intensive care units. The purpose of this study was to examine what factors are associated with nurse stress and work satisfaction among nurses practicing in an open-ward neonatal intensive care unit. A cross-sectional correlational design was used in this study. Participants were nurses employed in a 34-bed open-ward neonatal intensive care unit in a major university-affiliated hospital in Montréal, Quebec, Canada. A total of 94 nurses were eligible, and 86 completed questionnaires (91% response rate). Descriptive statistics were computed to describe the participants' characteristics. To identify factors associated with nurse stress and work satisfaction, correlational analysis and multiple regression analyses were performed with the Nurse Stress Scale and the Global Work Satisfaction scores as the dependent variables. Different factors predict neonatal intensive care unit nurses' stress and job satisfaction, including support, family-centered care, performance obstacles, work schedule, education, and employment status. In order to provide neonatal intensive care units nurses with a supportive environment, managers can provide direct social support to nurses and influence the culture around teamwork.

  13. Oxidative stress and antioxidant responses to progressive resistance exercise intensity in trained and untrained males

    Directory of Open Access Journals (Sweden)

    H Çakır-Atabek

    2015-11-01

    Full Text Available The relationship between oxidative stress and some exercise components of resistance exercise (e.g. intensity, exercise volume has not been clearly defined. Additionally, the oxidative stress markers may respond differently in various conditions. This study aims to determine the effects of progressive intensity of resistance exercise (RE on oxidative stress and antioxidants in trained and untrained men, and also to investigate the possible threshold intensity required to evoke oxidative stress. RE trained (N=8 and untrained (N=8 men performed the leg extension RE at progressive intensities standardized for total volume: 1x17 reps at 50% of one-repetition maximum (1RM; 1x14 reps at 60% of 1RM; 1x12 reps at 70% of 1RM; 2x5 reps at 80% of 1RM; and 3x3 reps at 90% of 1RM. Blood samples were drawn before (PRE and immediately after each intensity, and after 30 minutes, 60 minutes and 24 hours following the RE. Lipid-hydroperoxide (LHP significantly increased during the test and then decreased during the recovery in both groups (p0.05. Standardized volume of RE increased oxidative stress responses. Our study suggests that lower intensity (50% is enough to increase LHP, whereas higher intensity (more than 80% is required to evoke protein oxidation.

  14. Quantitative stress measurement of elastic deformation using mechanoluminescent sensor: An intensity ratio model

    Science.gov (United States)

    Cai, Tao; Guo, Songtao; Li, Yongzeng; Peng, Di; Zhao, Xiaofeng; Liu, Yingzheng

    2018-04-01

    The mechanoluminescent (ML) sensor is a newly developed non-invasive technique for stress/strain measurement. However, its application has been mostly restricted to qualitative measurement due to the lack of a well-defined relationship between ML intensity and stress. To achieve accurate stress measurement, an intensity ratio model was proposed in this study to establish a quantitative relationship between the stress condition and its ML intensity in elastic deformation. To verify the proposed model, experiments were carried out on a ML measurement system using resin samples mixed with the sensor material SrAl2O4:Eu2+, Dy3+. The ML intensity ratio was found to be dependent on the applied stress and strain rate, and the relationship acquired from the experimental results agreed well with the proposed model. The current study provided a physical explanation for the relationship between ML intensity and its stress condition. The proposed model was applicable in various SrAl2O4:Eu2+, Dy3+-based ML measurement in elastic deformation, and could provide a useful reference for quantitative stress measurement using the ML sensor in general.

  15. High intensity and reduced volume training attenuates stress and recovery levels in elite swimmers

    DEFF Research Database (Denmark)

    Elbe, Anne-Marie; Rasmussen, Camilla P; Nielsen, Glen

    2016-01-01

    This study investigated the effect of increased high-intensity interval training (HIT) at the expense of total training volume on the stress and recovery levels of elite swimmers. Forty-one elite swimmers participated in the study and were randomly assigned to either a HIT or a control group (CON....... The Recovery Stress Questionnaire - Sport was used to measure the swimmers' stress and recovery levels. After the 12 week intervention, the general stress level was 16.6% (2.6-30.7%; mean and 95% CI) lower and the general recovery level was 6.5% (0.7-12.4%) higher in HIT compared to the CON, after adjusting...... for baseline values. No significant effects could be observed in sports-specific stress or sports-specific recovery. The results indicate that increasing training intensity and reducing training volume for 12 weeks can reduce general stress and increase general recovery levels in competitive swimmers....

  16. Patient stress in intensive care: comparison between a coronary care unit and a general postoperative unit

    Science.gov (United States)

    Dias, Douglas de Sá; Resende, Mariane Vanessa; Diniz, Gisele do Carmo Leite Machado

    2015-01-01

    Objective To evaluate and compare stressors identified by patients of a coronary intensive care unit with those perceived by patients of a general postoperative intensive care unit. Methods This cross-sectional and descriptive study was conducted in the coronary intensive care and general postoperative intensive care units of a private hospital. In total, 60 patients participated in the study, 30 in each intensive care unit. The stressor scale was used in the intensive care units to identify the stressors. The mean score of each item of the scale was calculated followed by the total stress score. The differences between groups were considered significant when p < 0.05. Results The mean ages of patients were 55.63 ± 13.58 years in the coronary intensive care unit and 53.60 ± 17.47 years in the general postoperative intensive care unit. For patients in the coronary intensive care unit, the main stressors were “being in pain”, “being unable to fulfill family roles” and “being bored”. For patients in the general postoperative intensive care unit, the main stressors were “being in pain”, “being unable to fulfill family roles” and “not being able to communicate”. The mean total stress scores were 104.20 ± 30.95 in the coronary intensive care unit and 116.66 ± 23.72 (p = 0.085) in the general postoperative intensive care unit. When each stressor was compared separately, significant differences were noted only between three items. “Having nurses constantly doing things around your bed” was more stressful to the patients in the general postoperative intensive care unit than to those in the coronary intensive care unit (p = 0.013). Conversely, “hearing unfamiliar sounds and noises” and “hearing people talk about you” were the most stressful items for the patients in the coronary intensive care unit (p = 0.046 and 0.005, respectively). Conclusion The perception of major stressors and the total stress score were similar between patients

  17. A database to evaluate stress intensity factors of elbows with throughwall flaws under combined internal pressure and bending moment

    International Nuclear Information System (INIS)

    Chattopadhyay, J.; Dutta, B.K.; Kushwaha, H.S.; Mahajan, S.C.; Kakodkar, A.

    1993-01-01

    The advent of Leak-Before-Break (LBB) concept has replaced the traditional design basis event of Double Ended Guillotine Break (DEGB) in the design of primary heat transport (PHT) piping. The use of LBB concept requires postulation of largest credible cracks at highly stressed locations and demonstration of its stability under the maximum credible loading conditions. Stress analysis of PHT piping in nuclear power plants shows that the highly stressed piping components are normally elbows and branch tees. This necessitates detailed fracture mechanics evaluation of piping connections by computing Stress Intensity Factor (SIF) and/or J-integral. Simple analytical solutions for evaluation of SIF and J-integral for cracks in straight pipes are readily available in literature. However, the same type of solutions for elbows and tees are limited in open literature. In the present work, a database is generated to evaluate SIF for throughwall circumferential and longitudinal cracks under combined internal pressure and bending moment. Different parameters to characterise a cracked elbow are pipe factor (h), pipe bore radius to thickness ratio (r/t) and crack length. Another parameter (σ) is used to consider the relative magnitude of stresses due to internal pressure and remote bending moment. The database has been used to derive closed form expressions to evaluate SIF for elbow with cracks in terms of the aforementioned parameters. (author). 8 refs., 12 figs., 3 tabs

  18. The importance of physical activity and sleep for affect on stressful days: Two intensive longitudinal studies.

    Science.gov (United States)

    Flueckiger, Lavinia; Lieb, Roselind; Meyer, Andrea H; Witthauer, Cornelia; Mata, Jutta

    2016-06-01

    We investigated the potential stress-buffering effect of 3 health behaviors-physical activity, sleep quality, and snacking-on affect in the context of everyday life in young adults. In 2 intensive longitudinal studies with up to 65 assessment days over an entire academic year, students (Study 1, N = 292; Study 2, N = 304) reported stress intensity, sleep quality, physical activity, snacking, and positive and negative affect. Data were analyzed using multilevel regression analyses. Stress and positive affect were negatively associated; stress and negative affect were positively associated. The more physically active than usual a person was on a given day, the weaker the association between stress and positive affect (Study 1) and negative affect (Studies 1 and 2). The better than usual a person's sleep quality had been during the previous night, the weaker the association between stress and positive affect (Studies 1 and 2) and negative affect (Study 2). The association between daily stress and positive or negative affect did not differ as a function of daily snacking (Studies 1 and 2). On stressful days, increasing physical activity or ensuring high sleep quality may buffer adverse effects of stress on affect in young adults. These findings suggest potential targets for health-promotion and stress-prevention programs, which could help reduce the negative impact of stress in young adults. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  19. Crack edge collocation for the direct computation of stress intensity factors using the displacement discontinuity method

    CSIR Research Space (South Africa)

    Napier, JAL

    2002-09-01

    Full Text Available The numerical solution of problems relating to crack fracture and failure can be accomplished using the displacement discontinuity boundary element method. This paper presents an extension to the normal formulation of this method to enable stress...

  20. REDUCING THE INTENSITY OF TAKEAWAY PULVERIZED COAL BY USING SPECIAL SOLUTION

    Directory of Open Access Journals (Sweden)

    M. M. Biliaiev

    2017-04-01

    Full Text Available Purpose. The article is aimed: 1 to develop the coal coating solution in open railway cars or to cover coal piles to minimize the coal dust losses; 2 creating a mathematical model of the process of the solution feeding to the surface of coal. Methodology. To solve this problem, it was developed a special solution containing cheap industrial wastes and semiproducts of chemical industries. It was conducted a physical experiment to assess the intensity of coal dust loss when using the developed solution. A mathematical model based on the use of the motion equations of the ideal fluid and mass transfer was developed. The developed numerical models are the basis of the application program package created for assessing the quality of processing the coal surface by special solution. Findings. The results of the conducted physical experiment to assess the magnitude of the coal dust loss on the model of the coal pile in the processing of its surface with a special solution and without processing are presented in the article. It is shown that the application of the proposed solution for surface processing of coal can significantly reduce the coal dust loss. This makes it possible to reduce the amount of economic losses and reduce the level of air dust pollution in work areas. The results of computational experiments carried out on the basis of the constructed numerical models are presented in the article. Originality. Authors proposed a new solution for the coal surface processing in order to minimize the removal of pulverized coal from the coal pile, which substantially reduces the coal losses. There were created numerical models to take into account the relevant factors influencing the solution dispersion process in the atmosphere from coal processing in gondola cars. Practical value. Solution, proposed in the article has a low price, because it can be created on the basis of industrial production wastes. Application of this solution can significantly

  1. Application of the virtual crack closure technique to calculate stress intensity factors for through cracks with an oblique elliptical crack front

    NARCIS (Netherlands)

    Fawaz, S.

    1998-01-01

    Fractographic observations on fatigue tested 2024 T3 clad aluminium riveted lap-splice joints indicate oblique fronts after the initial surface or corner crack at a rivet hole has penetrated through the sheet thichness. No stress intensity factor solutions are available for this geometry subjected

  2. Determination of Stress Intensity Factor K1 from Two Fringe Orders by Fringe Multiplication and Sharpening

    International Nuclear Information System (INIS)

    Chen, Lei; Baek, Tae Hyun

    2007-01-01

    Stress intensity factor is one of the most important parameters in fracture mechanics. Both the stress field distribution and the crack propagation are closely related to these parameters. Due to the complexity of actual engineering problems, it is difficult to calculate the stress intensity factor by theoretical formulation, so photoelasticity method is a good choice. In this paper, modified two parameter method is employed to calculate stress intensity factor for opening mode by using data from more than one photoelastic fringe loop. For getting accurate experiment results, the initial fringes are doubled and sharpened by digital image programs from the fringe patterns obtained by a CCD camera. Photoelastic results are compared with those obtained by the use of empirical equation and FEM. Good agreement shows that the methods utilized in experiments are considerably reliable. The photoelastic experiment can be used for bench mark in theoretical study and other experiments

  3. Loss of parental role as a cause of stress in the neonatal intensive care unit.

    Science.gov (United States)

    Bouet, Kary M; Claudio, Norma; Ramirez, Verónica; García-Fragoso, Lourdes

    2012-01-01

    Having a baby in the Neonatal Intensive Care Unit (NICU) is a major source of stress for parents. The barriers to parenting and reactions to the environment may negatively influence the parent-infant relationship. To identify NICU-related parental stress and associated factors. Parents (N = 156) of newborns admitted to NICU completed the Parental Stressor Scale. Most of the parents (46%) rated the experience to be extremely stressful. The principal cause of stress was the alteration in parental role and being separated from their baby. Stress was not associated to education, marital status, infants' birth weight, gestational age, congenital anomalies or if the parents expected the baby to be in the NICU. Identification of areas associated to higher levels of stress in parents may help the NICU staff to establish strategies to help parents cope with the stress caused by being unable to start their parenting role immediately after their babies' birth.

  4. Pain sensitivity mediates the relationship between stress and headache intensity in chronic tension-type headache.

    Science.gov (United States)

    Cathcart, Stuart; Bhullar, Navjot; Immink, Maarten; Della Vedova, Chris; Hayball, John

    2012-01-01

    A central model for chronic tension-type headache (CTH) posits that stress contributes to headache, in part, by aggravating existing hyperalgesia in CTH sufferers. The prediction from this model that pain sensitivity mediates the relationship between stress and headache activity has not yet been examined. To determine whether pain sensitivity mediates the relationship between stress and prospective headache activity in CTH sufferers. Self-reported stress, pain sensitivity and prospective headache activity were measured in 53 CTH sufferers recruited from the general population. Pain sensitivity was modelled as a mediator between stress and headache activity, and tested using a nonparametric bootstrap analysis. Pain sensitivity significantly mediated the relationship between stress and headache intensity. The results of the present study support the central model for CTH, which posits that stress contributes to headache, in part, by aggravating existing hyperalgesia in CTH sufferers. Implications for the mechanisms and treatment of CTH are discussed.

  5. Fatigue Crack Growth Rate and Stress-Intensity Factor Corrections for Out-of-Plane Crack Growth

    Science.gov (United States)

    Forth, Scott C.; Herman, Dave J.; James, Mark A.

    2003-01-01

    Fatigue crack growth rate testing is performed by automated data collection systems that assume straight crack growth in the plane of symmetry and use standard polynomial solutions to compute crack length and stress-intensity factors from compliance or potential drop measurements. Visual measurements used to correct the collected data typically include only the horizontal crack length, which for cracks that propagate out-of-plane, under-estimates the crack growth rates and over-estimates the stress-intensity factors. The authors have devised an approach for correcting both the crack growth rates and stress-intensity factors based on two-dimensional mixed mode-I/II finite element analysis (FEA). The approach is used to correct out-of-plane data for 7050-T7451 and 2025-T6 aluminum alloys. Results indicate the correction process works well for high DeltaK levels but fails to capture the mixed-mode effects at DeltaK levels approaching threshold (da/dN approximately 10(exp -10) meter/cycle).

  6. Symptoms of Posttraumatic Stress after Intensive Care Delirium

    Directory of Open Access Journals (Sweden)

    Helle Svenningsen

    2015-01-01

    Full Text Available Introduction. Long-term psychological consequences of critical illness are receiving more attention in recent years. The aim of our study was to assess the correlation of ICU-delirium and symptoms of posttraumatic stress disorder (PTSD anxiety and depression after ICU-discharge in a Danish cohort. Methods. A prospective observational cohort study assessing the incidence of delirium in the ICU. Psychometrics were screened by validated tools in structured telephone interviews after 2 months (n=297 and 6 months (n=248 after ICU-discharge. Results. Delirium was detected in 54% of patients in the ICU and symptoms of PTSD in 8% (2 months and 6% (6 months after ICU-discharge. Recall of ICU stay was present in 93%. Associations between ICU-delirium and post-discharge PTSD-symptoms were weak and insignificant. Memories of delusions were significantly associated with anxiety after two months. Remaining associations between types of ICU-memories and prevalence of post-discharge symptoms of PTSD, anxiety, and depression were insignificant after adjusting for age. Incidence of ICU-delirium was unaffected by preadmission use of psychotropic drugs. Prevalence of PTSD-symptoms was unaffected by use of antipsychotics and sedation in the ICU. Conclusion. ICU-delirium did not increase the risk of PTSD-symptoms at 2 and 6 months after ICU discharge.

  7. Symptoms of Posttraumatic Stress after Intensive Care Delirium.

    Science.gov (United States)

    Svenningsen, Helle; Egerod, Ingrid; Christensen, Doris; Tønnesen, Else Kirstine; Frydenberg, Morten; Videbech, Poul

    2015-01-01

    Long-term psychological consequences of critical illness are receiving more attention in recent years. The aim of our study was to assess the correlation of ICU-delirium and symptoms of posttraumatic stress disorder (PTSD) anxiety and depression after ICU-discharge in a Danish cohort. A prospective observational cohort study assessing the incidence of delirium in the ICU. Psychometrics were screened by validated tools in structured telephone interviews after 2 months (n = 297) and 6 months (n = 248) after ICU-discharge. Delirium was detected in 54% of patients in the ICU and symptoms of PTSD in 8% (2 months) and 6% (6 months) after ICU-discharge. Recall of ICU stay was present in 93%. Associations between ICU-delirium and post-discharge PTSD-symptoms were weak and insignificant. Memories of delusions were significantly associated with anxiety after two months. Remaining associations between types of ICU-memories and prevalence of post-discharge symptoms of PTSD, anxiety, and depression were insignificant after adjusting for age. Incidence of ICU-delirium was unaffected by preadmission use of psychotropic drugs. Prevalence of PTSD-symptoms was unaffected by use of antipsychotics and sedation in the ICU. ICU-delirium did not increase the risk of PTSD-symptoms at 2 and 6 months after ICU discharge.

  8. Gradually Increased Training Intensity Benefits Rehabilitation Outcome after Stroke by BDNF Upregulation and Stress Suppression

    Directory of Open Access Journals (Sweden)

    Jing Sun

    2014-01-01

    Full Text Available Physical training is necessary for effective rehabilitation in the early poststroke period. Animal studies commonly use fixed training intensity throughout rehabilitation and without adapting it to the animals' recovered motor ability. This study investigated the correlation between training intensity and rehabilitation efficacy by using a focal ischemic stroke rat model. Eighty male Sprague-Dawley rats were induced with middle cerebral artery occlusion/reperfusion surgery. Sixty rats with successful stroke were then randomly assigned into four groups: control (CG, n=15, low intensity (LG, n=15, gradually increased intensity (GIG, n=15, and high intensity (HG, n=15. Behavioral tests were conducted daily to evaluate motor function recovery. Stress level and neural recovery were evaluated via plasma corticosterone and brain-derived neurotrophic factor (BDNF concentration, respectively. GIG rats significantly (P<0.05 recovered motor function and produced higher hippocampal BDNF (112.87 ± 25.18 ng/g. GIG and LG rats exhibited similar stress levels (540.63 ± 117.40 nM/L and 508.07 ± 161.30 nM/L, resp., which were significantly lower (P<0.05 than that (716.90 ± 156.48 nM/L of HG rats. Training with gradually increased intensity achieved better recovery with lower stress. Our observations indicate that a training protocol that includes gradually increasing training intensity should be considered in both animal and clinical studies for better stroke recovery.

  9. A New Displacement-based Approach to Calculate Stress Intensity Factors With the Boundary Element Method

    Directory of Open Access Journals (Sweden)

    Marco Gonzalez

    Full Text Available Abstract The analysis of cracked brittle mechanical components considering linear elastic fracture mechanics is usually reduced to the evaluation of stress intensity factors (SIFs. The SIF calculation can be carried out experimentally, theoretically or numerically. Each methodology has its own advantages but the use of numerical methods has become very popular. Several schemes for numerical SIF calculations have been developed, the J-integral method being one of the most widely used because of its energy-like formulation. Additionally, some variations of the J-integral method, such as displacement-based methods, are also becoming popular due to their simplicity. In this work, a simple displacement-based scheme is proposed to calculate SIFs, and its performance is compared with contour integrals. These schemes are all implemented with the Boundary Element Method (BEM in order to exploit its advantages in crack growth modelling. Some simple examples are solved with the BEM and the calculated SIF values are compared against available solutions, showing good agreement between the different schemes.

  10. Evaluation of stress intensity factors for bi-material interface cracks using displacement jump methods

    Science.gov (United States)

    Nehar, K. C.; Hachi, B. E.; Cazes, F.; Haboussi, M.

    2017-12-01

    The aim of the present work is to investigate the numerical modeling of interfacial cracks that may appear at the interface between two isotropic elastic materials. The extended finite element method is employed to analyze brittle and bi-material interfacial fatigue crack growth by computing the mixed mode stress intensity factors (SIF). Three different approaches are introduced to compute the SIFs. In the first one, mixed mode SIF is deduced from the computation of the contour integral as per the classical J-integral method, whereas a displacement method is used to evaluate the SIF by using either one or two displacement jumps located along the crack path in the second and third approaches. The displacement jump method is rather classical for mono-materials, but has to our knowledge not been used up to now for a bi-material. Hence, use of displacement jump for characterizing bi-material cracks constitutes the main contribution of the present study. Several benchmark tests including parametric studies are performed to show the effectiveness of these computational methodologies for SIF considering static and fatigue problems of bi-material structures. It is found that results based on the displacement jump methods are in a very good agreement with those of exact solutions, such as for the J-integral method, but with a larger domain of applicability and a better numerical efficiency (less time consuming and less spurious boundary effect).

  11. Validation of surface crack stress intensity factors of a tubular K-joint

    International Nuclear Information System (INIS)

    Lie, S.T.; Lee, C.K.; Chiew, S.P.; Shao, Y.B.

    2005-01-01

    Tubular K-joints are encountered widely in offshore structures, and the prediction of damaged joints depends very much on the accuracy of stress intensity factor solutions (SIFs). No parametric equations and very few results have been proposed and published in the literature for estimating the SIFs of any K-joints subjected to complex loading conditions. In this paper, a mesh generation method proposed previously for the Y-joint and T-joint has been extended to the K-joint. This method is realized by dividing the K-joint into several sub-zones with each zone consisting of different types of elements and mesh densities. This method has a distinct advantage of controlling the mesh quality, and most importantly the aspect ratio of the elements along the crack front. When the mesh of all the sub-zones has been generated automatically and completely, they are merged to form the complete model. The two most commonly used methods, namely the J-integral and displacement extrapolation, are used to evaluate the SIF values along the crack front of a typical K-joint. To validate the accuracy of these computed SIFs, a full-scale K-joint specimen was tested to failure under fatigue loading conditions. The standard alternating current potential drop (ACPD) technique was used to monitor the rate of crack propagation of the surface crack located at the hot spot stress region. Using the given material parameters C and m, the experimental SIFs were deduced, and they are found to be in good agreement with the computed SIFs obtained from the generated models. Hence, the proposed finite element models are both efficient and reliable

  12. Analysis of stress intensity factors for a new mechanical corrosion specimen

    International Nuclear Information System (INIS)

    Rassineux, B.; Crouzet, D.; Le Hong, S.

    1996-03-01

    Electricite de France is conducting a research program to determine corrosion cracking rates in the steam generators Alloy 600 tubes of the primary system. The objective is to correlate the cracking rates with the specimen stress intensity factor K I . One of the samples selected for the purpose of this study is the longitudinal notched specimen TEL (TEL: ''Tubulaire a Entailles Longitudinales''). This paper presents the analysis of the stress intensity factor and its experimental validation. The stress intensity factor has been evaluated for different loads using 3D finite element calculations with the Hellen-Parks and G(θ) methods. Both crack initiation and propagation are considered. As an assessment of the method, the numerical simulations are in good agreement with the fatigue crack growth rates measured experimentally for TEL and compact tension (CT) specimens. (authors). 8 refs., 6 figs., 2 tabs

  13. Mid-thickness studies of the stress intensity factor in the bulk of bainitic steel

    Directory of Open Access Journals (Sweden)

    P. Lopez-Crespo

    2017-07-01

    Full Text Available The current work aims at estimating the stress intensity factor deep inside the bulk from elastic strain data measured by synchrotron X-ray diffraction. Key features affecting the evaluation of the stress intensity factor are the number of terms in the analytical model describing the crack tip field, the extension and position of the area of interest of the experimental data, the effect of the experimental data collected within the plastic zone and the number of elastic strain data points used. Here a parametric study of these features is presented in terms of their influence for the stress intensity factor determination. It was found that 3 or 4 terms in Williams’ expansion is often sufficient; the data should be collected from across the full range of angles around the crack tip; and the number of points/number of terms should be greater than 40.

  14. Challenges in participatory primary stress management interventions in knowledge intensive SMEs

    DEFF Research Database (Denmark)

    Gish, Liv; Ipsen, Christine

    2013-01-01

    relevant change processes. This paper presents the outline of our research and development project on participatory primary stress management interventions in knowledge intensive SMEs, as well as the preliminary results and related implications. The research and development project is conducted in order...... to develop an operational model which SMEs can use when they want to initiate participatory primary stress management interventions in their company. The development project builds on a process model for participatory primary interventions in larger knowledge intensive companies and the premises behind......While knowledge intensive SMEs have recognized the need for change with respect to productivity and wellbeing, and to some extend have access to tools and methods for enabling this, they still lack process competences and are uncertain about how to approach primary stress interventions and initiate...

  15. Acute effects of intradialytic aerobic exercise on solute removal, blood gases and oxidative stress in patients with chronic kidney disease

    Directory of Open Access Journals (Sweden)

    Joseane Böhm

    Full Text Available Abstract Introduction: Hemodialysis contributes to increased oxidative stress and induces transitory hypoxemia. Compartmentalization decreases the supply of solutes to the dialyzer during treatment. The aim of this study was to investigate the acute effects of intradialytic aerobic exercise on solute removal, blood gases and oxidative stress in patients with chronic kidney disease during a single hemodialysis session. Methods: Thirty patients were randomized to perform aerobic exercise with cycle ergometer for lower limbs during 30 minutes with intensity between 60-70% of maximal heart rate, or control group (CG. Blood samples were collected prior to and immediately after exercise or the equivalent time in CG. Analysis of blood and dialysate biochemistry as well as blood gases were performed. Mass removal and solute clearance were calculated. Oxidative stress was determined by lipid peroxidation and by the total antioxidant capacity. Results: Serum concentrations of solutes increased with exercise, but only phosphorus showed a significant elevation (p = 0.035. There were no significant changes in solute removal and in the acid-base balance. Both oxygen partial pressure and saturation increased with exercise (p = 0.035 and p = 0.024, respectivelly, which did not occur in the CG. The total antioxidant capacity decreased significantly (p = 0.027. Conclusion: The acute intradialytic aerobic exercise increased phosphorus serum concentration and decreased total antioxidant capacity, reversing hypoxemia resulting from hemodialysis. The intradialytic exercise did not change the blood acid-base balance and the removal of solutes.

  16. Acute effects of intradialytic aerobic exercise on solute removal, blood gases and oxidative stress in patients with chronic kidney disease.

    Science.gov (United States)

    Böhm, Joseane; Monteiro, Mariane Borba; Andrade, Francini Porcher; Veronese, Francisco Veríssimo; Thomé, Fernando Saldanha

    2017-01-01

    Hemodialysis contributes to increased oxidative stress and induces transitory hypoxemia. Compartmentalization decreases the supply of solutes to the dialyzer during treatment. The aim of this study was to investigate the acute effects of intradialytic aerobic exercise on solute removal, blood gases and oxidative stress in patients with chronic kidney disease during a single hemodialysis session. Thirty patients were randomized to perform aerobic exercise with cycle ergometer for lower limbs during 30 minutes with intensity between 60-70% of maximal heart rate, or control group (CG). Blood samples were collected prior to and immediately after exercise or the equivalent time in CG. Analysis of blood and dialysate biochemistry as well as blood gases were performed. Mass removal and solute clearance were calculated. Oxidative stress was determined by lipid peroxidation and by the total antioxidant capacity. Serum concentrations of solutes increased with exercise, but only phosphorus showed a significant elevation (p = 0.035). There were no significant changes in solute removal and in the acid-base balance. Both oxygen partial pressure and saturation increased with exercise (p = 0.035 and p = 0.024, respectivelly), which did not occur in the CG. The total antioxidant capacity decreased significantly (p = 0.027). The acute intradialytic aerobic exercise increased phosphorus serum concentration and decreased total antioxidant capacity, reversing hypoxemia resulting from hemodialysis. The intradialytic exercise did not change the blood acid-base balance and the removal of solutes.

  17. Stress intensity evaluation for surface crack with use of boundary element method and influence function method and the surface crack extension analysis

    International Nuclear Information System (INIS)

    Yuuki, R.; Ejima, K.

    1991-01-01

    In this study, three-dimensional boundary element elastostatic analysis is carried out on various surface crack problems. The present BEM uses a Mindlin's solution as well as a Kelvin's solution as a fundamental solution. So we can obtain accurate solutions for a surface crack just before or after a penetration. The obtained solutions for various shapes of surface cracks are stored as the data base, based on the influence function method. We develop the surface crack extension analysis system using the stress intensity factor data base and also the fatigue crack growth law. Our system seems to be useful especially for the analysis of the surface crack just before or after the penetration and also under the residual stresses

  18. Stress intensity factors for complete internal and external cracks in spherical shells

    International Nuclear Information System (INIS)

    Chao, Y.J.; Chen, H.

    1989-01-01

    Cracks or flows found in the nuclear structure must be fully evaluated to assure the safety of the plant. The weight function method has been widely used in the determination of stress intensity factors for cracks under stress gradient e.g. for thermal shock loading. The unique features of the weight function method is that once the weight function for a particular cracked geometry is determined the stress intensity factors at the crack tip for any loading applied to the flawed structure can be calculated by a simple integration. In this paper the stress intensity factors of the complete, part-through internal and external cracks in a spherical shell are determined. The finite element method was used to develop the weight functions for the flawed geometry. The approximate crack surface profile was used to derive the weight functions. The stress intensity factors associated with the cracks in spherical shells under internal pressure are determined by both the weight functions and the direct finite element method

  19. The effect of massage therapy on occupational stress of Intensive Care Unit nurses.

    Science.gov (United States)

    Nazari, Fateme; Mirzamohamadi, Mojtaba; Yousefi, Hojatollah

    2015-01-01

    One of the main causes of stress in the lives of people is their jobs. Occupational stress is causing a wide range of significant issues in health and community services. Nursing is the most stressful profession in the health services. Massage therapy is one way of coping with stress. This study was conducted to determine the effect of massage therapy on stress in nurses. This study was a clinical trial on 66 male and female nurses working in intensive care units (dialysis, ICU, and CCU) of Isfahan University of Medical Sciences, Iran, in 2013. Participants were selected according to the aims and inclusion criteria of the study. Then, they were randomly divided into experimental and control groups. The Occupational Stress Inventory (OSI) (Osipow and Spokane, 1987) was completed by participants of the two groups before, immediately after, and 2 weeks after the intervention. General Swedish massage was performed on participants of the experimental group for 25 min in each session, twice a week for 4 weeks. Data were analyzed by descriptive and inferential statistics [Chi-square, t-test, and repeated measures analysis of variance (ANOVA)] using SPSS software. Results showed that the difference in overall mean occupation stress scores between experimental and control groups 2 weeks after the intervention was significant (P < 0.001). According to the results, it is recommended that massage, as a valuable noninvasive method, be used for nurses in intensive care units to reduce their stress, promote mental health, and prevent the decrease in quality of nursing work life.

  20. The consequences of nursing stress and need for integrated solutions.

    Science.gov (United States)

    Roberts, Rashaun K; Grubb, Paula L

    2014-01-01

    In a 2011 survey sponsored by the American Nurses Association (ANA), nurses identified the acute and chronic effects of stress and overwork as one of their two top safety and health concerns. A review of the literature was conducted to investigate the impact that job stress has on the health and safety of nursing professionals and the role that working conditions and job characteristics play in fostering job stress. Strong evidence supporting links between job stress, safety and health in general and within different types of nursing populations exists. Working conditions also contribute to the development of job stress. Combining and integrating "person-focused" strategies designed to build nurses' ability to manage stress at the individual level with "organization-focused" strategies that eliminate stressful working conditions is critical to the reduction and prevention of job stress among nursing professionals. © 2013 Association of Rehabilitation Nurses.

  1. Stress level among intensive care nurses in the municipality of Paraná (Brazil

    Directory of Open Access Journals (Sweden)

    Kelly Cristina Inoue

    2014-04-01

    Full Text Available Objective. To identify stress levels among intensive care nurses who work in the municipality of Western Paraná, Brazil. Methodology. This is a cross-sectional cohort study, carried out from May to July 2010, included 60 nurses from intensive care units (adult, pediatric, or neonatal of five hospitals. All participants completed the Bianchi Stress Scale. Results. The mean participant age was 31 years; 70% of the nurses were women, 33% had more than 15 years of experience, and 88% conducted care activities. The general level of stress was medium. Stress levels were low for relationships with other units and supervisors, activities related to adequate functioning of the unit and the coordination of activities of the unit. Levels were medium for the following domains: activities related to personnel management, labor conditions for the development of nursing activities, and delivery of care to patient; this last domain was related to the following stress factors: facing patient death, attending to emergencies in the unit, advising patients' family members, and conducting tasks in the minimal time available. Conclusion. Although the general stress level was medium, the identification of domains with a high score can be used to plan intervention strategies to preserve the health of intensive care nurses and, in turn, improve quality of care delivered to severely ill patients.

  2. Mechano-electrochemical study of stress corrosion crack tip area: Case of Zircaloy-4 in halide solution

    International Nuclear Information System (INIS)

    Durif, E.

    2012-01-01

    Stress corrosion cracking (SCC) is a damage phenomenon which results from the synergy between corrosion process (dissolution, adsorption) and mechanical fracture (crack propagation). Although this phenomenon is well known, its modelling is still a challenging issue, especially concerning mechano-electrochemical coupling mechanisms at crack tip, because it depends on model system (metal/aggressive media) and large number of mechanical and electrochemical factors. In this thesis, mutual interactions between dissolution and the stress state around the crack tip (stress intensity factor) are studied in the case of Zircaloy-4 in aqueous halide solution. Samples are first pre-cracked in air by using fatigue load-shedding procedure to control the stress intensity factor. Then, pre-oxidation is used to produce a thin protective passive layer on their surface. The electro-chemical reactions are thus concentrated at the crack tip which also induces a concentration of the mechanical effect. During the test, digital images of the sample surface are acquired. Digital Image Correlation is performed a posteriori in order to obtain the evolution of the crack length and the stress intensity factors. Further, a specific procedure is developed in order to perform the DIC analysis while the test is running. This allows to control the load so that a given value of the stress intensity factor is prescribed. With this innovative experimental technique, we perform experimental tests that allow to discriminate the effects between different stress corrosion cracking mechanisms. It is suggested that once a critical anodic polarization is exceeded, the crack growth rate depends on the stress intensity factor but also on its time derivative. Indeed, a threshold effect is obtained on the stress intensity factor, meaning that plasticity must increase for the dissolution reaction to occur, but also on its rate meaning that time for plasticity to produce new dislocations must not exceed the

  3. The effect of Residual Stress on the Stress Intensity Factor of Nuclear Material

    International Nuclear Information System (INIS)

    Song, Taek Ho

    2008-01-01

    As NPP (Nuclear Power Plant) gets aged, the importance of the pressure boundary integrity increases very much to those who are trying to operate their plant beyond its design life. Not long ago, Boric acid crystal was found at the RPV outlet nozzle of V.C. Summer plant during the visual examination in 2000. After this finding, non-destructive examination was taken to find out what's taken place. As a result of this examination, circumferential and axial cracks were found. With Metallurgical structure examination, it was shown that crack had been developed at the mid-point between Inco-alloy buttering and weld metal. It was turned out that high welding residual stress was the main cause of the cracking. Because of the through wall crack, nozzle and welding parts were replaced. Many other nuclear power plants experienced similar pressure boundary stress corrosion cracks (SCCs). KEPRI (Korea Electric Power Research Institute) has carried out research projects for managing and preventing these kinds of cracks in nuclear power plants (NPPs). The titles of these research projects are 'Development of Stress Corrosion Cracking Management Technology and Aging Monitor for NPP Main Components' and 'Development of Analysis Technology for Crack Management of Dissimilar Metal Weld'. Through these projects, residual stress measurement techniques have been exercised at various points in mock-up test specimens to simulate nuclear power plant dissimilar base metal and weldment residual stress. X-ray test and hole drilling method have been reviewed to measure residual stresses of the dissimilar metal welds. This paper shows some point of view in residual stress measurement. Fracture mechanics analysis has been performed to explain the importance of residual stress measurement in association with nuclear power plant safety

  4. Personality, stress and coping in intensive care nurses: a descriptive exploratory study.

    Science.gov (United States)

    Burgess, Lorraine; Irvine, Fiona; Wallymahmed, Akhtar

    2010-01-01

    The aim of the study was to investigate the relationship between personality traits, perception of workplace stress and coping among intensive care unit (ICU) nurses. Research has indicated that ICUs are stressful environments. There is a tendency for research studies to investigate causes of stress and ways of coping, but few studies, particularly in recent years, have considered the personality traits of the staff who thrive in this challenging environment, the work stress they perceive and the coping strategies they use. A convenience sample of critical care nurses (n = 46) completed three standardised questionnaires during September 2007: the revised NEO personality inventory (NEO-PI-R); the nurses stress scale (NSI) and the Brief Coping Orientations to Problems Experienced (COPE) scale. ICU nurses did not perceive their workplaces to be stressful. Certain personality traits, openness, agreeableness and conscientiousness, were associated with problem-solving coping strategies such as active planning and reframing. Openness and extraversion were associated with less perceived stress from the 'patients and relatives' dimension of the NSI; there were also negative correlations between conscientiousness and the 'workload stress' and stress from lack of 'confidence and competence' dimensions of the NSI. Certain personality traits may have a buffering effect on workplace stress. Pre-employment screening to identify staff that exhibit personality and coping traits associated with low perceived stress may be considered as part of the recruitment strategy to address problems relating to stress, sickness and retention. The retention and recruitment of staff who have lower perceived workplace stress and who utilise problem-focused coping may result in less reported absences and fewer critical incidents and errors.

  5. Intensive care diaries reduce new onset post traumatic stress disorder following critical illness

    DEFF Research Database (Denmark)

    Jones, Christina; Bäckman, Carl; Capuzzo, Maurizia

    2010-01-01

    Patients recovering from critical illness have been shown to be at risk of developing Post Traumatic Stress disorder (PTSD). This study was to evaluate whether a prospectively collected diary of a patient's intensive care unit (ICU) stay when used during convalescence following critical illness...

  6. Posttraumatic Stress Disorder's Frequency and Intensity Ratings Are Associated with Factor Structure Differences in Military Veterans

    Science.gov (United States)

    Elhai, Jon D.; Palmieri, Patrick A.; Biehn, Tracey L.; Frueh, B. Christopher; Magruder, Kathryn M.

    2010-01-01

    We examined possible differences in the factor structure of posttraumatic stress disorder (PTSD) on the basis of whether frequency or intensity symptom response formats were used to assess PTSD. Participants included 669 veterans recruited from an epidemiological study of four Veterans Affairs Medical Centers' primary care clinics in the…

  7. Evaluation of stress intensity factor for craks in surface of tubes with internal pressure

    International Nuclear Information System (INIS)

    Cesari, F.; Hellen, T.K.

    1977-01-01

    In this report the authors have examined the different methods for calculation of the stress intensity factor in tubes subject at internal pressure with surface cracks. The analysis includes cracks in 2-D axialsymmetric and 3-D. Moreover the authors have clarified the difference between the ASME Sec.11 and the procedure more rigorous

  8. Measurement and interpretation of threshold stress intensity factors for steels in high-pressure hydrogen gas.

    Energy Technology Data Exchange (ETDEWEB)

    Dadfarnia, Mohsen (University of Illinois at Urbana-Champaign, Urbana, IL); Nibur, Kevin A.; San Marchi, Christopher W.; Sofronis, Petros (University of Illinois at Urbana-Champaign, Urbana, IL); Somerday, Brian P.; Foulk, James W., III; Hayden, Gary A. (CP Industries, McKeesport, PA)

    2010-07-01

    Threshold stress intensity factors were measured in high-pressure hydrogen gas for a variety of low alloy ferritic steels using both constant crack opening displacement and rising crack opening displacement procedures. The sustained load cracking procedures are generally consistent with those in ASME Article KD-10 of Section VIII Division 3 of the Boiler and Pressure Vessel Code, which was recently published to guide design of high-pressure hydrogen vessels. Three definitions of threshold were established for the two test methods: K{sub THi}* is the maximum applied stress intensity factor for which no crack extension was observed under constant displacement; K{sub THa} is the stress intensity factor at the arrest position for a crack that extended under constant displacement; and K{sub JH} is the stress intensity factor at the onset of crack extension under rising displacement. The apparent crack initiation threshold under constant displacement, K{sub THi}*, and the crack arrest threshold, K{sub THa}, were both found to be non-conservative due to the hydrogen exposure and crack-tip deformation histories associated with typical procedures for sustained-load cracking tests under constant displacement. In contrast, K{sub JH}, which is measured under concurrent rising displacement and hydrogen gas exposure, provides a more conservative hydrogen-assisted fracture threshold that is relevant to structural components in which sub-critical crack extension is driven by internal hydrogen gas pressure.

  9. Suppression of Helicobacter pylori infection during intensive care stay: related to stress ulcer bleeding incidence?

    NARCIS (Netherlands)

    van der Voort, P. H.; van der Hulst, R. W.; Zandstra, D. F.; Geraedts, A. A.; van der Ende, A.; Tytgat, G. N.

    2001-01-01

    PURPOSE: To assess the prevalence of active Helicobacter pylori infection in patients admitted to the intensive care unit, to determine the effect of selective gut decontamination on the persistence of this organism, and to explore the possible relationship between H. pylori infection and stress

  10. Calculations of the stress intensity factor on a specimen for a four-point bend

    International Nuclear Information System (INIS)

    Lauerova, D.

    1995-02-01

    The stress intensity factor K I was calculated in dependence on the crack length in a sample for a (non-standard) four-point bend assuming elastic properties of the material. It is shown that the SYSTUS code gives the best results when calculating the K I value from the J-integral. 4 tabs., 12 figs., 4 refs

  11. Thermal stresses in rectangular plates: variational and finite element solutions

    International Nuclear Information System (INIS)

    Laura, P.A.A.; Gutierrez, R.H.; Sanchez Sarmiento, G.; Basombrio, F.G.

    1978-01-01

    This paper deals with the development of an approximate method for the analysis of thermal stresses in rectangular plates (plane stress problem) and an evaluation of the relative accuracy of the finite element method. The stress function is expanded in terms of polynomial coordinate functions which identically satisfy the boundary conditions, and a variational approach is used to determine the expansion coefficients. The results are in good agreement with a finite element approach. (Auth.)

  12. The association between pregame snacks and exercise intensity, stress, and fatigue in children.

    Science.gov (United States)

    Sacheck, Jennifer M; Rasmussen, Helen M; Hall, Meghan M; Kafka, Tamar; Blumberg, Jeffrey B; Economos, Christina D

    2014-05-01

    To investigate the association between pregame snacks varying in macronutrient content and exercise intensity, physiological stress, and fatigue in young soccer players. One hour before a 50-min soccer game, children (n = 79; 9.1 ± 0.8 y) were randomly assigned to consume a raisin-, peanut-butter-, or cereal-based snack. Body mass index, blood glucose, and salivary measures of stress (cortisol and immunoglobulin A-IgA) were measured pre- and post-game. Exercise intensity was measured by accelerometry. Self-administered questionnaires were used to assess diet quality and fatigue. Analysis of covariance was used to examine the relationship between pregame snacks and biochemical outcomes. Postgame glucose and cortisol increased [12.9 ± 21.3 mg/dL (p fatigue (p fatigue but not changes in blood sugar or stress biomarkers following a soccer game in children.

  13. Further studies on stress intensity factors of semi-elliptical cracks in pressurized cylinders

    International Nuclear Information System (INIS)

    Kobayashi, A.S.; Emery, A.F.; Love, W.J.; Jain, A.

    1979-01-01

    The authors have used, in the past, the three-dimensional stress intensity magnification factor, Msub(KS), for a semi-elliptical surface crack in a flat plate with a curvature correction factor, Msub(C), to estimate the stress intensity magnification factor, Msub(K) = Msub(C) x Msub(KS), for unpressurized and pressurized inner semi-elliptical cracks and unpressurized outer semi-elliptical cracks in pressurized and thermally shocked cylinders. Recent papers by Atluri/Kathiresan, Welliot/Labbens/Pellissier-Tanon and McGowan/Raymund, however, showed that while this plate analogy with curvature correction provided reasonable estimates of the stress intensity factors at the deepest crack penetration, it underestimated the stress intensity factors at the cylindrical surface. The source of this discrepancy was traced to the curvature correction factor Msub(C), which was re-evaluated for various crack configurations and cylindrical geometries studied. Using the updated Msub(C) together with the previously derived Msub(KS), stress intensity factor magnification factor, Msub(K), was rederived for: (1) Pressurized and unpressurized inner semi-elliptical cracks of two crack aspects ratios of b/a = 0.2 and 0.98 at crack depth of b/(Rsub(o)-Rsub(i)) = 0.4, 0.6, and 0.8 in pressurized cylinders with outside-to-inside radius ratios of Rsub(o)/Rsub(i) = 3/2, 5/4, 7/6, and 10/9. (2) Unpressurized outer semi-elliptical cracks of two crack aspect ratios of b/a = 0.2 and 0.98 at crack depths of b/(Rsub(o)-Rsub(i)) = 0.4, 0.6, and 0.8 in pressurized cylinders with outside-to-inside radius ratio of Rsub(o)/Rsub(i) = 3/2, 5/4, 7/6, and 10/9. (orig.)

  14. Intensive monitoring of forest ecosystems in Europe; 2: atmospheric deposition and its impacts on soil solution chemistry

    NARCIS (Netherlands)

    Vries, de W.; Reinds, G.J.; Vel, E.M.

    2003-01-01

    In order to gain a better understanding of the effects of air pollution and other stress factors on forests, a Pan-European programme for intensive and continuous monitoring of forest ecosystems has been implemented in 1994. Results of this intensive monitoring programme presented in this paper are

  15. Experimental and numerical determination of critical stress intensity factor of aluminum curved thin sheets under tensile stress

    Energy Technology Data Exchange (ETDEWEB)

    Heidarvand, Majid; Soltani, Naser; Hajializadeh, Farshid [University of Tehran, Tehran (Iran, Islamic Republic of)

    2017-05-15

    We determined the fracture toughness of aluminum curved thin sheets using tensile stress tests and finite element method. We applied Linear elastic fracture mechanics (LEFM) and Feddersen procedure to evaluate stress intensity factor of the samples with central wire-cut cracks and fatigue cracks with different lengths to investigate the notch radius effect. Special fixture design was utilized to establish uniform stress distribution at the crack zone. Less than 9 % difference was found between the wire-cut and the fatigue cracked samples. Since generating central fatigue crack with different lengths required so much effort, wire-cut cracked samples were used to determine critical stress intensity factor. Finite element analysis was also performed on one-quarter of the specimen using both the singular Borsum elements and the regular isoparametric elements to further investigate fracture toughness of the samples. It was observed that the singular elements presented better results than the isoparametric ones. A slight difference was also found between the results obtained from finite element method using singular elements and the experimental results.

  16. [Stress in parents of hospitalized newborns in a neonatal intensive care unit].

    Science.gov (United States)

    Palma I, Elisa; Von Wussow K, Fernanda; Morales B, Ignacia; Cifuentes R, Javier; Ambiado T, Sergio

    2017-06-01

    The birth of a child that requires hospitalization in a Neonatal Intensive Care Unit (NICU) can be very stressful for parents. To determine the stress level of parents of newborns (NB) hospitalized in a level III NICU in Santiago, and its association with clinical and sociodemographic variables. Descriptive cross-sectional study. 373 admissions were evaluated. The sampling was non-probabilistic and included parents of RN admitted to the UPCN between 7 and 21 days of hospitalization. Only parents which have visited the RN at least three times were included. i) Questionnaire to obtain data which could not be obtained from the medical record; ii) Parental Stress Scale: Neonatal Intensive Care Unit (PSS:NICU) which measures the perception of parents about stressors from the physical and psychological environment of the UPCN. 100 parents of 59 hospitalized NB participated in the study. The average parental stress was 2.87±0.69. The subscale scores got higher was “Relationship with the baby and parental role”. Complications in pregnancy, prenatal diagnosis or prenatal hospitalization, did not affect the stress level or the presence of prematurity, respiratory diseases, congenital malformations, genopathies or requirement of mechanical ventilation. Stress levels presented in parents are unrelated to gender and to the studied clinical variables.

  17. Communicating with parents in neonatal intensive care units: The impact on parental stress.

    Science.gov (United States)

    Enke, Christian; Oliva Y Hausmann, Andrés; Miedaner, Felix; Roth, Bernhard; Woopen, Christiane

    2017-04-01

    To analyse stress in parents whose infants with very low birth weight have just concluded high-level care in a Neonatal Intensive Care Unit (NICU). More specifically, we aimed 1) to identify groups of parents in the NICU who are particularly at risk of experiencing stress, and 2) to explore the effects of clinical staffś communication on parental stress. Our multi-center-study evaluated views from 1277 parents about care for 923 infants in 66 German NICUs. Answers were linked with separately evaluated medical outcomes of the infants. Separate generalised mixed models estimated the influence of personal, medical and communication-related characteristics on specific parental stress. Parents of a younger age and those of infants with severe prognoses were more likely to experience stress. While empathetic communication as one aspect of staffś communication was shown as appropriate in reducing parental stress, an initial introduction and the quantity of information were only slightly associated with lower levels of stress. Results provide evidence for the need to involve parents empathetically from the beginning of their child's stay in the NICU. Staff in the NICU should communicate empathetically and help to reduce stress in parents particularly at risk. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  18. Predictors of stress among parents in pediatric intensive care unit: a prospective observational study.

    Science.gov (United States)

    Aamir, Mohd; Mittal, Kundan; Kaushik, Jaya Shankar; Kashyap, Haripal; Kaur, Gurpreet

    2014-11-01

    To determine the sociodemographic and clinical factors leading to stress among parents whose children are admitted in pediatric intensive care unit (PICU). A prospective observational study was conducted in PICU of a tertiary care hospital of north India. Parents of children admitted to PICU for at least 48 h duration were eligible for participation. At the end of 48 h, parental stress was assessed using parental stress scale (PSS:PICU) questionnaire which was administered to the parents. Baseline demographic and clinical parameters of children admitted to PICU were recorded. The parental stress was compared with demographic and clinical characteristics of children using appropriate statistical methods. A total of 49 parents were finally eligible for participation. Mean (SD) parental stress scores was highest in domains of procedures [1.52 (0.66)] and behavior and emotional [1.32 (0.42)] subscales. Mean (SD) total parental stress score among intubated children [1.31 (0.25)] was significantly more than among non intubated children [0.97 (0.26)] (p parental stress score were comparable in terms of gender (p = 0.15) and socioeconomic status (p = 0.32). On subscale analysis, it was found that professional communication is a significant stressor in age groups 0-12 mo [0.61(0.41)] (p = 0.02). It was observed that parents of intubated children were significantly stressed by the physical appearance of their children (p parental role (p = 0.002). Total parental stress score had a positive correlation with PRISM score (r = 0.308). Indian parents are stressed maximally with environment of PICU. Factor leading to parental stress was intubation status of the child and was not affected by gender or socio demographic profile of the parents.

  19. Exact solution for stresses/displacements in a multilayered hollow cylinder under thermo-mechanical loading

    International Nuclear Information System (INIS)

    Yeo, W.H.; Purbolaksono, J.; Aliabadi, M.H.; Ramesh, S.; Liew, H.L.

    2017-01-01

    In this study, a new analytical solution by the recursive method for evaluating stresses/displacements in multilayered hollow cylinder under thermo-mechanical loading was developed. The results for temperature distribution, displacements and stresses obtained by using the proposed solution were shown to be in good agreement with the FEM results. The proposed analytical solution was also found to produce more accurate results than those by the analytical solution reported in literature. - Highlights: • A new analytical solution for evaluating stresses in multilayered hollow cylinder under thermo-mechanical loading. • A simple computational procedure using a recursive method. • A promising technique for evaluating the operating axial and hoop stresses in pressurized composite vessels.

  20. Resolved shear stress intensity coefficient and fatigue crack growth in large crystals

    Science.gov (United States)

    Chen, QI; Liu, Hao-Wen

    1988-01-01

    Fatigue crack growth in large grain Al alloy was studied. Fatigue crack growth is caused primarily by shear decohesion due to dislocation motion in the crack tip region. The crack paths in the large crystals are very irregular and zigzag. The crack planes are often inclined to the loading axis both in the inplane direction and the thickness direction. The stress intensity factors of such inclined cracks are approximated from the two dimensional finite element calculations. The plastic deformation in a large crystal is highly anisotropic, and dislocation motion in such crystals are driven by the resolved shear stress. The resolved shear stress intensity coefficient in a crack solid, RSSIC, is defined, and the coefficients for the slip systems at a crack tip are evaluated from the calculated stress intensity factors. The orientations of the crack planes are closely related to the slip planes with the high RSSIC values. If a single slip system has a much higher RSSIC than all the others, the crack will follow the slip plane, and the slip plane becomes the crack plane. If two or more slip systems have a high RSSIC, the crack plane is the result of the decohesion processes on these active slip planes.

  1. Functional Neuroimaging of Emotionally Intense Autobiographical Memories in Post-Traumatic Stress Disorder

    Science.gov (United States)

    St. Jacques, Peggy L.; Botzung, Anne; Miles, Amanda; Rubin, David C.

    2010-01-01

    Post-traumatic stress disorder (PTSD) affects regions that support autobiographical memory (AM) retrieval, such as the hippocampus, amygdala and ventral medial prefrontal cortex (PFC). However, it is not well understood how PTSD may impact the neural mechanisms of memory retrieval for the personal past. We used a generic cue method combined with parametric modulation analysis and functional MRI (fMRI) to investigate the neural mechanisms affected by PTSD symptoms during the retrieval of a large sample of emotionally intense AMs. There were three main results. First, the PTSD group showed greater recruitment of the amygdala/hippocampus during the construction of negative versus positive emotionally intense AMs, when compared to controls. Second, across both the construction and elaboration phases of retrieval the PTSD group showed greater recruitment of the ventral medial PFC for negatively intense memories, but less recruitment for positively intense memories. Third, the PTSD group showed greater functional coupling between the ventral medial PFC and the amygdala for negatively intense memories, but less coupling for positively intense memories. In sum, the fMRI data suggest that there was greater recruitment and coupling of emotional brain regions during the retrieval of negatively intense AMs in the PTSD group when compared to controls. PMID:21109253

  2. ORGANIZATIONAL STRESS SOURCES AND SOLUTION PROPOSALS IN PUBLIC TRANSPORT

    Directory of Open Access Journals (Sweden)

    Mehmet Zennur GÜRBÜZ

    2017-09-01

    Full Text Available Organizational stress is a concept which can have negative effects for both the workers and the organizations. The purpose of this study is to determine and classify the organizational stress sources that public transportation are exposed to, and to provide suggestions for managing these stress factors. A comprehensive literature survey is made in organizational stress factors and the following classes are identified: work structure, organizational structure, organizational policy, within-company relations and physical conditions. A questionnaire is developed forAnkara EGO General Directorate; applied to 2.137 drivers in Ankara in 2016 with a meaningful return of 1.554 data sets, representing 72% of the population and results are statistically analysed. Descriptive statistics, factor analysis and related validity and regional variance analyses are performed by SPSS (22.0 software. The study revealed that: drivers are exposed to mid-level stess; and most critical stress causes are “injustice and/or insufficiency of salaries”, “aggresive, violent behavior and verbal abuse of passengers towards drivers”, “fear of losing jobs or renewal of the contract”. A significant level of variation in stres levels are identified with respect to different regions of Ankara where drivers are assigned.  Suggestions are made in relation to different stres causes to lower the stress levels exposed.

  3. Influence of Ni Solute segregation on the intrinsic growth stresses in Cu(Ni) thin films

    International Nuclear Information System (INIS)

    Kaub, T.M.; Felfer, P.; Cairney, J.M.; Thompson, G.B.

    2016-01-01

    Using intrinsic solute segregation in alloys, the compressive stress in a series of Cu(Ni) thin films has been studied. The highest compressive stress was noted in the 5 at.% Ni alloy, with increasing Ni concentration resulting in a subsequent reduction of stress. Atom probe tomography quantified Ni's Gibbsian interfacial excess in the grain boundaries and confirmed that once grain boundary saturation is achieved, the compressive stress was reduced. This letter provides experimental support in elucidating how interfacial segregation of excess adatoms contributes to the post-coalescence compressive stress generation mechanism in thin films. - Graphical abstract: Cu(Ni) film stress relationship with Ni additions. Atom probe characterization confirms solute enrichment in the boundaries, which was linked to stress response.

  4. Stress intensities for nozzle cracks in reactor vessels. Reporting period, January 1, 1976--October 31, 1976

    International Nuclear Information System (INIS)

    Smith, C.W.; Jolles, M.; Peters, W.H.

    1976-11-01

    A series of six frozen stress photoelastic tests was conducted to investigate the distribution of stress intensity factor (SIF) along a crack which occurred at the juncture of a pipe (nozzle) with a cylindrical pressure vessel. Typical photoelastic fringe patterns are shown for slices which were taken mutually orthogonal to the flaw border and the flaw surface. A typical plot of normalized apparent SIF versus square root of normalized distance from the crack tip is presented. The variation in SIF along the flaw border is given for all six different crack geometries and also the variation of SIF with varying a/T is presented. 40 references

  5. Low intensity aerobic exercise and oxidative stress markers in older adults.

    Science.gov (United States)

    Bouzid, Mohamed A; Hammouda, Omar; Matran, Régis; Robin, Sophie; Fabre, Claudine

    2014-10-01

    This comparative study examined the effects of regular low intensity aerobic exercise on oxidative stress markers in older adults. The study was carried out on 15 sedentary subjects (age: 65.1 ± 3.5 years) versus 18 subjects performing fitness exercises (age: 65.8 ± 3.3 years). Before and after an incremental exercise test, oxidative stress markers were assessed. Superoxide dismutase was higher at rest and at the recovery for the physically active subjects compared with sedentary subjects (p aerobic exercise may be useful to prevent the decline of antioxidants linked with aging.

  6. [The application of low-intensity electromagnetic radiation under immobilization stress conditions (an experimental study)].

    Science.gov (United States)

    Korolev, Iu N; Bobrovnitskiĭ, I P; Nikoulina, L A; Mikhaĭlik, L V; Geniatulina, M S; Bobkova, A S

    2014-01-01

    The experiments carried out on outbred male white rats with the use of optical, electron-microscopic, biochemical, and radioimmunological methods have demonstrated that the application of low-intensity electromagnetic radiation (LI-EMR) with a flow density of 1 mcW/cm2 and a frequency of around 1,000 MHz both in the primary prophylaxis regime and as the therapeuticpreventive modality arrested the development of post-stress disorders in the rat testicles, liver, and thymus; moreover, it promoted activation of the adaptive, preventive, and compensatory processes. The data obtained provide a rationale for the application of low-intensity electromagnetic radiation to protect the organism from negative effects of stressful factors.

  7. Analysis of stress intensity factors for surface cracks in pre/post penetration

    International Nuclear Information System (INIS)

    Miyoshi, Toshiro; Yoshida, Yuichiro

    1988-01-01

    It is important to evaluate the penetration of surface cracks in a Leak-Before-Break analysis. Because the stress intensity factors for surface cracks in pre/post penetration had not yet been analyzed, the authors carried three-dimensional boundary element analyses in order to obtain them. First, the authors developed the technique of nodal breakdown appropriate for cracks with short ligament length in a two-dimensional boundary element analysis. Next, analyses of stress intensity factor for surface cracks in pre/post penetration were carried out using the technique of nodal breakdown for cracks with short ligament length and the three-dimensional boundary element code BEM 3 D which was designed for a supercomputer. (author)

  8. Quantification of Protein Biomarker Using SERS Nano-Stress Sensing with Peak Intensity Ratiometry

    Science.gov (United States)

    Goh, Douglas; Kong, Kien Voon; Jayakumar, Perumal; Gong, Tianxun; Dinish, U. S.; Olivo, Malini

    We report a surface enhanced Raman spectroscopy (SERS) ratiometry method based on peak intensity coupled in a nano-stress sensing platform to detect and quantify biological molecules. Herein, we employed an antibody-conjugated p-aminothiophenol (ATP) functionalized on a bimetallic-film-over-nanosphere (BMFON) substrate as a sensitive SERS platform to detect human haptoglobin (Hp) protein, which is an acute phase protein and a biomarker for various cancers. Correlation between change in the ATP spectral characteristics and concentration of Hp protein was established by examining the peak intensity ratio at 1572cm-1 and 1592cm-1 that reflects the degree of stress experienced by the aromatic ring of ATP during Hp protein-antibody interaction. Development of this platform shows the potential in developing a low-cost and sensitive SERS sensor for the pre-screening of various biomarkers.

  9. Effects of Exercise Intensity on Postexercise Endothelial Function and Oxidative Stress

    Directory of Open Access Journals (Sweden)

    Conor McClean

    2015-01-01

    Full Text Available Purpose. To measure endothelial function and oxidative stress immediately, 90 minutes, and three hours after exercise of varying intensities. Methods. Sixteen apparently healthy men completed three exercise bouts of treadmill running for 30 minutes at 55% V˙O2max (mild; 20 minutes at 75% V˙O2max (moderate; or 5 minutes at 100% V˙O2max (maximal in random order. Brachial artery flow-mediated dilation (FMD was assessed with venous blood samples drawn for measurement of endothelin-1 (ET-1, lipid hydroperoxides (LOOHs, and lipid soluble antioxidants. Results. LOOH increased immediately following moderate exercise (P0.05. Conclusions. Acute exercise at different intensities elicits varied effects on oxidative stress, shear rate, and ET-1 that do not appear to mediate changes in endothelial function measured by FMD.

  10. A virtual crack-closure technique for calculating stress intensity factors for cracked three dimensional bodies

    Science.gov (United States)

    Shivakumar, K. N.; Tan, P. W.; Newman, J. C., Jr.

    1988-01-01

    A three-dimensional virtual crack-closure technique is presented which calculates the strain energy release rates and the stress intensity factors using only nodal forces and displacements from a standard finite element analysis. The technique is an extension of the Rybicki-Kanninen (1977) method, and it assumes that any continuous function can be approximated by a finite number of straight line segments. Results obtained by the method for surface cracked plates with and without notches agree favorably with previous results.

  11. Low intensity microwave radiation induced oxidative stress, inflammatory response and DNA damage in rat brain.

    Science.gov (United States)

    Megha, Kanu; Deshmukh, Pravin Suryakantrao; Banerjee, Basu Dev; Tripathi, Ashok Kumar; Ahmed, Rafat; Abegaonkar, Mahesh Pandurang

    2015-12-01

    Over the past decade people have been constantly exposed to microwave radiation mainly from wireless communication devices used in day to day life. Therefore, the concerns over potential adverse effects of microwave radiation on human health are increasing. Until now no study has been proposed to investigate the underlying causes of genotoxic effects induced by low intensity microwave exposure. Thus, the present study was undertaken to determine the influence of low intensity microwave radiation on oxidative stress, inflammatory response and DNA damage in rat brain. The study was carried out on 24 male Fischer 344 rats, randomly divided into four groups (n=6 in each group): group I consisted of sham exposed (control) rats, group II-IV consisted of rats exposed to microwave radiation at frequencies 900, 1800 and 2450 MHz, specific absorption rates (SARs) 0.59, 0.58 and 0.66 mW/kg, respectively in gigahertz transverse electromagnetic (GTEM) cell for 60 days (2h/day, 5 days/week). Rats were sacrificed and decapitated to isolate hippocampus at the end of the exposure duration. Low intensity microwave exposure resulted in a frequency dependent significant increase in oxidative stress markers viz. malondialdehyde (MDA), protein carbonyl (PCO) and catalase (CAT) in microwave exposed groups in comparison to sham exposed group (pmicrowave exposed groups (pmicrowave exposed animal (pmicrowave exposed groups as compared to their corresponding values in sham exposed group (pmicrowave radiation induces oxidative stress, inflammatory response and DNA damage in brain by exerting a frequency dependent effect. The study also indicates that increased oxidative stress and inflammatory response might be the factors involved in DNA damage following low intensity microwave exposure. Copyright © 2015 Elsevier Inc. All rights reserved.

  12. Calcium and potassium contents in nutrient solution on Phoma leaf spot intensity in coffee seedlings

    Directory of Open Access Journals (Sweden)

    Aricléia de Moraes Catarino

    Full Text Available ABSTRACT Coffee is one of the main export commodities of Brazilian agribusiness. Phoma leaf spot [Phoma tarda (Stewart Boerema & Bollen] is one of the most important coffee fungal diseases in Brazil. Therefore, this study aimed to evaluate the intensity of Phoma leaf spot in coffee seedlings supplied with different rates of Ca+2 and K+. The study was conducted under controlled conditions in a growth chamber, at the Department of Phytopathology - UFLA, from February 2010 to December 2011. The assay was repeated twice under the same conditions. The nutrient solutions consisted of five concentrations of K+ (3, 4, 5, 6, 7 mmol L-1 and Ca+2 (2, 4, 6, 8 and 10 mmol L-1. The experiment was arranged in a randomized block design, with 25 treatments and three replicates, with two plants per plot. The areas under incidence progress curve (AUIPC and severity (AUSPC were calculated. At the lowest rate of Ca2+ (2 mmol L-1 and highest K+ (6 and 7 mmol L-1, approximately, the AUIPC was the smallest. For the AUSPC, the lowest rates of Ca+2 and K+ resulted in the lowest severities. Supply of Ca+2 and K+ in nutrient solution reduced AUIPC and AUSPC of Phoma leaf spot, and these nutrients can be recommended for the management of the disease.

  13. Automation of the solution type of intensity modulated radiation therapy with direct planning neoplastic breast lesions

    International Nuclear Information System (INIS)

    Fuente Rosales, Liset De La; Larrinaga Cortina, Eduardo Francisco

    2009-01-01

    Breast cancer ranks first among the lesions malignancies involving the Cuban women and the second in mortality only surpassed by lung injury. The breast-conserving surgery is becoming less appeal, with an increase in the choice of radiotherapy to the breast operated, and the surgical bed. Intensity Modulated Radiation Therapy, IMRT has demonstrated better results in the dose distribution for irradiation dimensional treatment breast shaping, 3DCRT. We developed a MATLAB application to obtain the solution type to direct planning IMRT for breast neoplasm. The technique was implemented in the Planning System Treatment Plus Theraplan v3.8 and Precise1 ELEKTA linear accelerator. Static segments are constructed for each portal of incidence and Excel files are exported as the positions of the blades. The technique was validated with a patient, which he performed a radiographic study of computerized axial tomography planning purposes. The standard solution built is consistent with those reported internationally and consists of a segment type and at least two segments of type B. The assignment of the relative weights of the segments is done manually by trial and error procedure, with the general rule of 90% by weight assigned to segment A and the remaining 10% divided equally between B-type segments IMRT breast obtained in a dose 17% homogeneity better than 3DCRT and reduced the average dose in the lung ipsilateral 15%. (author)

  14. Pipe stress intensity factors and coupled depressurization and dynamic crack propagation. 1976 Annual report

    International Nuclear Information System (INIS)

    Emery, A.F.; Kobayashi, A.S.; Love, W.J.

    1978-04-01

    This report contains the description of predictive models for the initiation and propagation of cracks in pipes and the numerical results obtained. The initiation of the crack was studied by evaluating stress intensity factors under static conditions for a series of representative flaws. Three-dimensional static stress intensity factors were determined for quarter-elliptical cracks at the corner of a hole in an infinite plate and at the corner of a bore in a rotating disk. Semi-elliptical cracks for plates in bending and in pressurized and thermally stressed hollow cylinders were also evaluated. The stress fields, in the absence of a crack, were used in the ''alternating technique'' to compute the stress intensity factors along the crack front. Parametric studies were made to assess the effects of crack thickness, the ratio of the major and minor axes of the ellipse and the thickness of the cylinders or plates. These parametric results may be used to predict critical flaw sizes for the initiation of the running crack. The initiation and propagation of axial through cracks in pressurized pipes was studied by using an elastic-plastic finite different shell code coupled with a one-dimensional thermal-hydraulic code which computed the leakage through the crack opening and the depressurization of the fluid in the pipe. The effects of large deflections and different fluid pressure profiles were investigated. The results showed that the crack opening shape is dependent upon the fracture criterion used and upon the average pressure on the crack flaps, but not upon the specific pressure profile. The consideration of large deflections changed the opening size of the crack and through the coupling with the pipe pressures, strongly affected the crack tip speed. However, for equal crack lengths, there was little difference between calculations made for large and small deflection

  15. A study on the evaluation of dynamic stress intensity factor in repeated impact bending test

    International Nuclear Information System (INIS)

    Sim, Jae Ki; Cho, Gyu Jae; Han, Gill Young

    1988-01-01

    The purpose of the present paper was to establish the evaluation of the dynamic stress intensity factor in repeated impact three point bending test. Contact force between the impact bar and the cracked beam (simple supported beam) was analyzed by the using Hertz's contact law. In order to clarify the validity of theoretical analysis, experiments of dynamic stress intensity factir k I (t) are made on the cracked beam. The results obtained from this study are as follow: 1. In case of impact force analysis the theoretical result was obtained by the use of the Hertz's contact law. It's result was agreemant with the experimental result. Particularly, it was good agreement in the low impact velocity range. 2. The time variation of the dynamic stress intensity was determined by using the simple formula developed in this pqper. And the validity of it's result can be confirmed by experiment. Particlarly, this theoretical analysis was a good agreement to actual phenomena on from 0.3 msec to 0.65 msec. (Author)

  16. Improved Formula for the Stress Intensity Factor of Semi-Elliptical Surface Cracks in Welded Joints under Bending Stress

    Science.gov (United States)

    Peng, Yang; Wu, Chao; Zheng, Yifu; Dong, Jun

    2017-01-01

    Welded joints are prone to fatigue cracking with the existence of welding defects and bending stress. Fracture mechanics is a useful approach in which the fatigue life of the welded joint can be predicted. The key challenge of such predictions using fracture mechanics is how to accurately calculate the stress intensity factor (SIF). An empirical formula for calculating the SIF of welded joints under bending stress was developed by Baik, Yamada and Ishikawa based on the hybrid method. However, when calculating the SIF of a semi-elliptical crack, this study found that the accuracy of the Baik-Yamada formula was poor when comparing the benchmark results, experimental data and numerical results. The reasons for the reduced accuracy of the Baik-Yamada formula were identified and discussed in this paper. Furthermore, a new correction factor was developed and added to the Baik-Yamada formula by using theoretical analysis and numerical regression. Finally, the predictions using the modified Baik-Yamada formula were compared with the benchmark results, experimental data and numerical results. It was found that the accuracy of the modified Baik-Yamada formula was greatly improved. Therefore, it is proposed that this modified formula is used to conveniently and accurately calculate the SIF of semi-elliptical cracks in welded joints under bending stress. PMID:28772527

  17. Stress, coping and burnout among Intensive Care Unit nursing staff: associated factors.

    Science.gov (United States)

    Andolhe, Rafaela; Barbosa, Ricardo Luis; Oliveira, Elaine Machado de; Costa, Ana Lúcia Siqueira; Padilha, Katia Grillo

    2015-02-01

    Objective To investigate emotional stress, coping and burnout among nursing staff and their association with biosocial factors and characteristics of work in Intensive Care Units (ICU). Method This was a cross-sectional study, conducted in eight ICUs at a teaching hospital in the city of São Paulo, Brazil, in October 2012. Biosocial data and information about the professionals' work was gathered, and they were given the Scale of Occupational Stress, Scale of Occupational Coping, List of Signs and Symptoms of Stress and the Maslach Burnout Inventory. Results The study sample consisted of 287 subjects, predominately women, with partners and children. Most professionals presented moderate stress levels and control as a coping strategy (74.47% and 79.93%, respectively), and burnout was present among 12.54%. Factors associated with stress were related to working conditions. The most prevalent protective factors were having a partner, working in the clinical ICU and liking work, while adequate amount of sleep was a protective factor for burnout. Conclusion Control of the working environment and adequate sleep are decisive and protective factors in dealing with situations of occupational stress.

  18. Round Robin Analyses on Stress Intensity Factors of Inner Surface Cracks in Welded Stainless Steel Pipes

    Directory of Open Access Journals (Sweden)

    Chang-Gi Han

    2016-12-01

    Full Text Available Austenitic stainless steels (ASSs are widely used for nuclear pipes as they exhibit a good combination of mechanical properties and corrosion resistance. However, high tensile residual stresses may occur in ASS welds because postweld heat treatment is not generally conducted in order to avoid sensitization, which causes a stress corrosion crack. In this study, round robin analyses on stress intensity factors (SIFs were carried out to examine the appropriateness of structural integrity assessment methods for ASS pipe welds with two types of circumferential cracks. Typical stress profiles were generated from finite element analyses by considering residual stresses and normal operating conditions. Then, SIFs of cracked ASS pipes were determined by analytical equations represented in fitness-for-service assessment codes as well as reference finite element analyses. The discrepancies of estimated SIFs among round robin participants were confirmed due to different assessment procedures and relevant considerations, as well as the mistakes of participants. The effects of uncertainty factors on SIFs were deducted from sensitivity analyses and, based on the similarity and conservatism compared with detailed finite element analysis results, the R6 code, taking into account the applied internal pressure and combination of stress components, was recommended as the optimum procedure for SIF estimation.

  19. Influence of acute exercise of varying intensity and duration on postprandial oxidative stress.

    Science.gov (United States)

    Canale, Robert E; Farney, Tyler M; McCarthy, Cameron G; Bloomer, Richard J

    2014-09-01

    Aerobic exercise can reduce postprandial lipemia, and possibly oxidative stress, when performed prior to a lipid-rich meal. To compare the impact of acute exercise on postprandial oxidative stress. We compared aerobic and anaerobic exercise bouts of different intensities and durations on postprandial blood triglycerides (TAG), oxidative stress biomarkers (malondialdehyde, hydrogen peroxide, advanced oxidation protein products), and antioxidant status (trolox equivalent antioxidant capacity, superoxide dismutase, catalase, glutathione peroxidase). Twelve trained men (21-35 years) underwent four conditions: (1) No exercise rest; (2) 60-min aerobic exercise at 70% heart rate reserve; (3) five 60-s sprints at 100% max capacity; and (4) ten 15-s sprints at 200% max capacity. All exercise bouts were performed on a cycle ergometer. A high-fat meal was consumed 1 h after exercise cessation. Blood samples were collected pre-meal and 2 and 4 h post-meal and analyzed for TAG, oxidative stress biomarkers, and antioxidant status. No significant interaction or condition effects were noted for any variable (p > 0.05), with acute exercise having little to no effect on the magnitude of postprandial oxidative stress. In a sample of healthy, well-trained men, neither aerobic nor anaerobic exercise attenuates postprandial oxidative stress in response to a high-fat meal.

  20. Round robin analysis on stress intensity factor of inner surface cracks in welded stainless steel pipes

    Energy Technology Data Exchange (ETDEWEB)

    Han, Chang Gi; Chang, Yoon Suk [Dept. of Nuclear Engineering, College of Engineering, Kyung Hee University, Yongin (Korea, Republic of); Kim, Jong Sung [Dept. of Mechanical Engineering, Sunchon National University, Sunchon (Korea, Republic of); Kim, Maan Won [Central Research Institute, Korea Hydro and Nuclear Power Company, Daejeon (Korea, Republic of)

    2016-12-15

    Austenitic stainless steels (ASSs) are widely used for nuclear pipes as they exhibit a good combination of mechanical properties and corrosion resistance. However, high tensile residual stresses may occur in ASS welds because postweld heat treatment is not generally conducted in order to avoid sensitization, which causes a stress corrosion crack. In this study, round robin analyses on stress intensity factors (SIFs) were carried out to examine the appropriateness of structural integrity assessment methods for ASS pipe welds with two types of circumferential cracks. Typical stress profiles were generated from finite element analyses by considering residual stresses and normal operating conditions. Then, SIFs of cracked ASS pipes were determined by analytical equations represented in fitness-for-service assessment codes as well as reference finite element analyses. The discrepancies of estimated SIFs among round robin participants were confirmed due to different assessment procedures and relevant considerations, as well as the mistakes of participants. The effects of uncertainty factors on SIFs were deducted from sensitivity analyses and, based on the similarity and conservatism compared with detailed finite element analysis results, the R6 code, taking into account the applied internal pressure and combination of stress components, was recommended as the optimum procedure for SIF estimation.

  1. Sling surgery for stress urinary incontinence; the perfect solution?

    NARCIS (Netherlands)

    Hogewoning, C.R.C.

    2017-01-01

    Stress urinary incontinence (SUI) is the most observed type of urinary incontinence and is defined as the loss of urine following a rise in abdominal pressure. The TVT (Tension-free Vaginal Tape), a mid-urethral sling (MUS), was introduced in 1996 and soon became the gold standard in the surgical

  2. Genetic solutions to infertility caused by heat stress

    Science.gov (United States)

    Reproductive function in mammals is very susceptible to disruption by heat stress. In lactating dairy cows, for example, pregnancy rates per insemination can be as low as 10-15% in the summer vs. 25-40% in cool weather. Reduced fertility in females is caused by a combination of 1) the negative cons...

  3. Specific features of peroxide stress in children permanently exposed to low-intensity radiation

    International Nuclear Information System (INIS)

    Durnov, L.A.; Bajkova, V.N.; Mayakova, S.A.; Polyakov, V.G.; Kolosov, E.A.; Dumbrajs, K.O.; Gracheva, I.V.; Zakharova, N.V.; Leonidova, Yu.A.; Romanova, L.F.

    2000-01-01

    To study the peculiarities of peroxide stress in children residing at the territories with chronic low-intensity radiation effects, the investigation was performed of tyrosine level, indices of the intensity of free radical lipid peroxidation and antioxidant system status in children and teenagers living in Sverdlovsk and Kolpnyansk districts of the Orel region contaminated due to the Chernobyl accident. Regions mentioned are characterized by low-intensity contamination with radionuclides (mainly 90 Sr, 131 I, 137 Cs), 25% an increase in tyrosine content, 1.8 times in malonic dial, 25-40 % in catalase and superoxide dismutase activity was revealed in blood plasma. Contents of A and E vitamins, glutathione and glutathione-depending enzymes are decreased. It is recommended to observe children health in regions contaminated as a result of the Chernobyl accident and correct failed redox processes using antioxidative vitamins [ru

  4. Coping With Staff Burnout and Work-Related Posttraumatic Stress in Intensive Care.

    Science.gov (United States)

    Colville, Gillian A; Smith, Jared G; Brierley, Joe; Citron, Kim; Nguru, Noreen M; Shaunak, Priyanka D; Tam, Olivia; Perkins-Porras, Linda

    2017-07-01

    To examine the associations with symptoms of 1) burnout and 2) work-related posttraumatic stress, in adult and pediatric intensive care staff, focusing on the particular contributions of resilience and coping strategies. Point prevalence cross-sectional study. Three adult ICUs and four PICUs. Three hundred seventy-seven ICU staff. None. Brief Resilience Scale, abbreviated Maslach Burnout Inventory, Trauma Screening Questionnaire, and Hospital Anxiety and Depression Scale. Prevalence of burnout (defined as high emotional exhaustion or high depersonalization) was 37%. Prevalence of clinically significant posttraumatic stress symptoms was 13%. There was a degree of overlap between burnout and other measures of distress, most notably for anxiety (odds ratio, 10.56; 95% CI, 4.12-27.02; p work-related distress (burnout: odds ratio, 0.52; 95% CI, 0.36-0.74; p stress: odds ratio, 0.28; 95% CI, 0.16-0.46; p stress were less if staff used talking to seniors (odds ratio, 0.43; 95% CI, 0.20-0.92; p = 0.029) or hobbies (odds ratio, 0.46; 95% CI, 0.23-0.93; p = 0.030) to cope with stress at work. Venting emotion (odds ratio, 1.92; 95% CI, 1.12-3.31; p = 0.018) and using alcohol (odds ratio, 2.30; 95% CI, 1.26-4.20; p = 0.006) were associated with a doubling in risk of reporting burnout. The use of particular coping strategies was systematically associated with symptoms of burnout and work-related posttraumatic stress in this group of intensive care staff, even after controlling for resilience and other factors. More research on how best to promote adaptive coping is needed in these challenging settings.

  5. An analytical solution describing the shape of a yield stress material subjected to an overpressure

    DEFF Research Database (Denmark)

    Hovad, Emil; Spangenberg, Jon; Larsen, P.

    2016-01-01

    as well as the spread length and height of the material when deformed in a box due to gravity. In the present work, the analytical solution is extended with the addition of an overpressure that acts over the entire body of the material. This extension enables finding the shape of a yield stress material......Many fluids and granular materials are able to withstand a limited shear stress without flowing. These materials are known as yields stress materials. Previously, an analytical solution was presented to quantify the yield stress for such materials. The yields stress is obtained based on the density...... with known density and yield stress when for instance deformed under water or subjected to a forced air pressure....

  6. Perceived Stress and Professional Quality of Life in Neonatal Intensive Care Unit Nurses in Gujarat, India.

    Science.gov (United States)

    Amin, Amee A; Vankar, Jagdish R; Nimbalkar, Somashekhar M; Phatak, Ajay G

    2015-11-01

    To study the levels of perceived stress in Neonatal Intensive Care Unit (NICU) nurses and its association with professional quality of life domains viz. compassion satisfaction, burnout and secondary trauma. In this multicenter, cross sectional study, data was collected by surveying 129 nurses from nine NICUs across six cities of Gujarat, India using demographic questionnaire, Perceived Stress Scale (PSS14) and Professional Quality of Life Scale (ProQOL5) during July to September 2013. Descriptive statistics, correlation coefficient and multiple regression were used for analysis. The mean (SD) age of participants was 28.37 (8.20) y. Most were single, satisfied with salary benefits and reported 'good' to 'excellent' relationships at work. The mean (SD) duration of duty hours was 8.12 (0.76) h and 43.6% were attending to more than 4 patients/shift. The mean (SD) perceived stress level was 22.19 (7.17) [Range: 3 to 39]. High compassion satisfaction, high burnout, and high secondary traumatic stress were reported by 25 (19.4%), 30 (23.3%) and 30 (23.3%) nurses respectively. PSS14 was negatively correlated with compassion satisfaction (r = -0.28) and positively correlated with burnout (r = 0.43) and secondary traumatic stress (r = 0.24). Most of the nurses (91, 70.5%) were identified as perceiving moderate to high stress. Professional quality of life domains correlated with perceived stress. There is further need to study domains influencing NICU nurses' professional QOL. Identifying stress and QOL issues in NICU nurses can help formulate relevant policies.

  7. Iranian parent-staff communication and parental stress in the neonatal Intensive Care Unit.

    Science.gov (United States)

    Hasanpour, Marzieh; Alavi, Mousa; Azizi, Fatemeh; Als, Heidelise; Armanian, Amir Mohmmad

    2017-01-01

    The birth of an infant requiring hospitalization in the neonatal Intensive Care Unit (NICU) uniformly is reported to be stressful for parents and family members. This study aimed to determine parent-staff communication in the NICU and its relationship to parent stress. Two hundred and three Iranian parents with preterm infants hospitalized in the NICU participated in this descriptive-correlational study. The participants were selected by the quota sampling method. Data collected included a three-part: questionnaire, the first part covered demographic parent and infant information, the second was the Parent-Staff Communication Scale (the score of which ranged from 0 to 180), and the third was the Parental Stress Scale (the score of which ranged from 0 to 102). Descriptive and inferential statistics including the Pearson's correlation coefficient test were applied to the data, using SPSS software Version 16. This study revealed that fathers and mothers' stress and communication scores were almost comparable and both higher than expected. The total mean score of the two main variables, i.e., parent-staff communication and parental stress were, respectively, 100.72 ± 18.89 and 75.26 ± 17.6. A significant inverse correlation was found between parental stress and parent-staff communication scores ( r = -0.144, P = 0.041). Based on this study finding showed that better parent-staff communication is related to lower parent stress scores, it is recommended that nurses and physicians receive specific skill training for the establishment of effective parent-staff communication. It is anticipated that such improved staff skills will help decrease parent stress and therewith likely promote parent and infant health in the NICU.

  8. Compatible solutes in lactic acid bacteria subjected to water stress

    NARCIS (Netherlands)

    Kets, E.P.W.

    1997-01-01

    The goal of the research project described in this thesis was to investigate the protective effect of compatible solutes on tactic acid bacteria subjected to drying. Dried preparations of lactic acid bacteria are applied as starter cultures in feed and food industries. Dried starter

  9. Influence of microstructure on stress corrosion cracking of mild steel in synthetic caustic-nitrate nuclear waste solution

    International Nuclear Information System (INIS)

    Sarafian, P.G.

    1975-12-01

    The influence of alloy microstructure on stress corrosion cracking of mild steel in caustic-nitrate synthetic nuclear waste solutions was studied. An evaluation was made of the effect of heat treatment on a representative material (ASTM A 516 Grade 70) used in the construction of high activity radioactive waste storage tanks at Savannah River Plant. Several different microstructures were tested for susceptibility to stress corrosion cracking. Precracked fracture specimens loaded in either constant load or constant crack opening displacement were exposed to a variety of caustic-nitrate and nitrate solutions. Results were correlated with the mechanical and corrosion properties of the microstructures. Crack velocity and crack arrest stress intensity were found to be related to the yield strength of the steel microstructures. Fractographic evidence indicated pH depletion and corrosive crack tip chemistry conditions even in highly caustic solutions. Experimental results were compatible with crack growth by a strain-assisted anodic dissolution mechanism; however, hydrogen embrittlement also was considered possible

  10. Work stress, occupational burnout and depression levels: a clinical study of paediatric intensive care unit nurses in Taiwan.

    Science.gov (United States)

    Lin, Tzu-Ching; Lin, Huey-Shyan; Cheng, Su-Fen; Wu, Li-Min; Ou-Yang, Mei-Chen

    2016-04-01

    This study aimed to examine the relationship between work stress and depression; and investigate the mediating effect of occupational burnout among nurses in paediatric intensive care units. The relationships among work stress, occupational burnout and depression level have been explored, neither regarding occupational burnout as the mediating role that causes work stress to induce depression nor considering the paediatric intensive care unit context. A cross-sectional correlational design was conducted. One hundred and forty-four female paediatric intensive care unit nurses from seven teaching hospitals in southern Taiwan were recruited as the participants. Data were collected by structured questionnaires including individual demographics, the Nurse Stress Checklist, the Occupational Burnout Inventory and the Taiwan Depression Questionnaire. The results indicated that after controlling for individual demographic variables, the correlations of work stress with occupational burnout, as well as work stress and occupational burnout with depression level were all positive. Furthermore, occupational burnout may exert a partial mediating effect on the relationship between work stress and depression level. This study provides information about work stress, occupational burnout and depression level, and their correlations, as well as the mediating role of occupational burnout among paediatric intensive care unit nurses. It suggests government departments and hospital administrators when formulating interventions to prevent work stress and occupational burnout. These interventions can subsequently prevent episodes of depression in paediatric intensive care unit nurses, thereby providing patients with a safe and high-quality nursing environment. © 2016 John Wiley & Sons Ltd.

  11. Analytical solutions of couple stress fluid flows with slip boundary conditions

    Directory of Open Access Journals (Sweden)

    Devakar M.

    2014-09-01

    Full Text Available In the present article, the exact solutions for fundamental flows namely Couette, Poiseuille and generalized Couette flows of an incompressible couple stress fluid between parallel plates are obtained using slip boundary conditions. The effect of various parameters on velocity for each problem is discussed. It is found that, for each of the problems, the solution in the limiting case as couple stresses approaches to zero is similar to that of classical viscous Newtonian fluid. The results indicate that, the presence of couple stresses decreases the velocity of the fluid.

  12. Neonatal Intensive Care and Child Psychiatry Inpatient Care: Do Different Working Conditions Influence Stress Levels?

    Directory of Open Access Journals (Sweden)

    Evalotte Mörelius

    2013-01-01

    Full Text Available Introduction. Nurses often experience work-related stress. High stress can negatively affect job satisfaction and lead to emotional exhaustion with risk of burnout. Aim. To analyse possible differences in biological stress markers, psychosocial working conditions, health, and well-being between nurses working in two different departments. Methods. Stress was evaluated in nurses working in a neonatal intensive care unit (NICU (n=33 and nurses working in a child and adolescent psychiatry inpatient ward (CAP (n=14 using salivary cortisol and HbA1c. Salivary cortisol was measured three times a day on two consecutive days during two one-week periods, seven weeks apart (= 12 samples/person. Psychosocial working conditions, health, and well-being were measured once. Results. NICU nurses had better social support and more self-determination. CAP nurses had a lower salivary cortisol quotient, poorer general health, and higher client-related burnout scores. Conclusion. When comparing these nurses with existing norm data for Sweden, as a group their scores reflect less work-related stress than Swedes overall. However, the comparison between NICU and CAP nurses indicates a less healthy work situation for CAP nurses. Relevance to Clinical Practice. Healthcare managers need to acknowledge the less healthy work situation CAP nurses experience in order to provide optimal support and promote good health.

  13. Mixed-mode stress intensity factors for kink cracks with finite kink length loaded in tension and bending: application to dentin and enamel.

    Science.gov (United States)

    Bechtle, Sabine; Fett, Theo; Rizzi, Gabriele; Habelitz, Stefan; Schneider, Gerold A

    2010-05-01

    Fracture toughness resistance curves describe a material's resistance against crack propagation. These curves are often used to characterize biomaterials like bone, nacre or dentin as these materials commonly exhibit a pronounced increase in fracture toughness with crack extension due to co-acting mechanisms such as crack bridging, crack deflection and microcracking. The knowledge of appropriate stress intensity factors which depend on the sample and crack geometry is essential for determining these curves. For the dental biomaterials enamel and dentin it was observed that, under bending and tensile loading, crack propagation occurs under certain constant angles to the initial notch direction during testing procedures used for fracture resistance curve determination. For this special crack geometry (a kink crack of finite length in a finite body) appropriate geometric function solutions are missing. Hence, we present in this study new mixed-mode stress intensity factors for kink cracks with finite kink length within samples of finite dimensions for two loading cases (tension and bending) which were derived from a combination of mixed-mode stress intensity factors of kink cracks with infinitely small kinks and of slant cracks. These results were further applied to determine the fracture resistance curves of enamel and dentin by testing single edge notched bending (SENB) specimens. It was found that kink cracks with finite kink length exhibit identical stress fields to slant cracks as soon as the kink length exceeds 0.15 times the initial straight crack or notch length. The use of stress intensity factor solutions for infinitely small kink cracks for the determination of dentin fracture resistance curves (as was done by other researchers) leads to an overestimation of dentin's fracture resistance of up to 30%. Copyright 2010 Elsevier Ltd. All rights reserved.

  14. The stress and stress intensity factors computation by BEM and FEM combination for nozzle junction under pressure and thermal loads

    International Nuclear Information System (INIS)

    Du, Q.; Cen, Z.; Zhu, H.

    1989-01-01

    This paper reports linear elastic fracture analysis based upon the stress intensity factor evaluation successfully applied to safety assessments of cracked structures. The nozzle junction are usually subjected to high pressure and thermal loads simultaneously. In validity of linear elastic fracture analysis, K can be decomposed into K P (caused by mechanic loads) and K τ (caused by thermal loads). Under thermal transient loading, explicit analysis (say by the FEM or BEM) of K tracing an entire history respectively for a range of crack depth may be much more time consuming. The techniques of weight function provide efficient means for transforming the problem into the stress computation of the uncracked structure and generation of influence function (for the given structure and size of crack). In this paper, a combination of BE-FEM has been used for the analysis of the cracked nozzle structure by techniques of weight function. The influence functions are obtained by coupled BE-FEM and the uncracked structure stress are computed by finite element methods

  15. Razlike med spoloma pri nekaterih simptomih stresa ter intenzivnost doživljanja stresnih simptomov = Gender Differences in Some Stress Symptoms and Intensity of Experiencing Stress Symptoms

    Directory of Open Access Journals (Sweden)

    Maja Meško

    2010-06-01

    Full Text Available The aim of this study was to identify the symptoms of stress and to establishgender differences in stress symptoms. We tried to find out ifthere are gender differences in the stress level at work, if there aregender differences in terms of stress symptoms frequency, and if thereare gender differences in terms of the intensity of experiencing stresssymptoms. In this study 85 randomly selected managers from Slovenecompanies participated. The results of the study have shown that thereare gender differences in terms of all the above mentioned factors,namely a statistically higher level of stress in women. In terms of stresssymptoms occurrence there are gender differences in some stress symptomsas well as in the intensity of experiencing stress symptoms.

  16. Response of coral assemblages to thermal stress: are bleaching intensity and spatial patterns consistent between events?

    Science.gov (United States)

    Penin, Lucie; Vidal-Dupiol, Jeremie; Adjeroud, Mehdi

    2013-06-01

    Mass bleaching events resulting in coral mortality are among the greatest threats to coral reefs, and are projected to increase in frequency and intensity with global warming. Achieving a better understanding of the consistency of the response of coral assemblages to thermal stress, both spatially and temporally, is essential to determine which reefs are more able to tolerate climate change. We compared variations in spatial and taxonomic patterns between two bleaching events at the scale of an island (Moorea Island, French Polynesia). Despite similar thermal stress and light conditions, bleaching intensity was significantly lower in 2007 (approximately 37 % of colonies showed signs of bleaching) than in 2002, when 55 % of the colonies bleached. Variations in the spatial patterns of bleaching intensity were consistent between the two events. Among nine sampling stations at three locations and three depths, the stations at which the bleaching response was lowest in 2002 were those that showed the lowest levels of bleaching in 2007. The taxonomic patterns of susceptibility to bleaching were also consistent between the two events. These findings have important implications for conservation because they indicate that corals are capable of acclimatization and/or adaptation and that, even at small spatial scales, some areas are consistently more susceptible to bleaching than others.

  17. General Series Solutions for Stresses and Displacements in an Inner-fixed Ring

    Science.gov (United States)

    Jiao, Yongshu; Liu, Shuo; Qi, Dexuan

    2018-03-01

    The general series solution approach is provided to get the stress and displacement fields in the inner-fixed ring. After choosing an Airy stress function in series form, stresses are expressed by infinite coefficients. Displacements are obtained by integrating the geometric equations. For an inner-fixed ring, the arbitrary loads acting on outer edge are extended into two sets of Fourier series. The zero displacement boundary conditions on inner surface are utilized. Then the stress (and displacement) coefficients are expressed by loading coefficients. A numerical example shows the validity of this approach.

  18. Nanoscale Stress-Corrosion of Geomaterials in Aqueous Solutions

    Science.gov (United States)

    Criscenti, L. J.; Rimsza, J. M.; Matteo, E. N.; Jones, R. E.

    2017-12-01

    Predicting subcritical crack propagation in low-permeability geo-materials is an unsolved problem crucial to assessing shale caprocks at CO2 sequestration sites, and controlling fracturing for gas and oil extraction. Experiments indicate that chemical reactions at fluid-material interfaces play a major role in subcritical crack growth by weakening the material and altering crack nucleation and growth rates. However, understanding subsurface fracture has been hindered by a lack of understanding of the mechanisms relating chemical environment to mechanical outcome, and a lack of capability directly linking atomistic insight to macroscale observables. We are using both molecular simulation and experiment to develop an atomistic-level understanding of the chemical-mechanical coupling that controls subcritical crack propagation. We are investigating fracture of isotropic silica glass in different environments (air, distilled water, and Na+-rich solutions) and will extend our research to include clay minerals in shales. Molecular simulations are performed with ReaxFF, a reactive force field that allows for explicit modeling of bond breaking and formation processes during crack propagation. A coarse-graining method produces calculated fracture toughness values from the atomistic data. We are performing double cleavage drilled compression (DCDC) experiments in aqueous environmental chambers and monitoring crack propagation with either a confocal or atomic force microscope. Our results show that silica fracture toughness decreases as the environment changes from air to distilled water to Na+-rich solutions. These results suggest that our newly developed computational and experimental techniques can be used to investigate the impact of fluid composition on crack growth in geo-materials and that we will be able to use these methods to understand coupled chemo-mechanical processes and predict crack propagation in shale minerals. Sandia National Laboratories is a multimission

  19. Preventing overtraining in athletes in high-intensity sports and stress/recovery monitoring.

    Science.gov (United States)

    Kellmann, M

    2010-10-01

    In sports, the importance of optimizing the recovery-stress state is critical. Effective recovery from intense training loads often faced by elite athletes can often determine sporting success or failure. In recent decades, athletes, coaches, and sport scientists have been keen to find creative, new methods for improving the quality and quantity of training for athletes. These efforts have consistently faced barriers, including overtraining, fatigue, injury, illness, and burnout. Physiological and psychological limits dictate a need for research that addresses the avoidance of overtraining, maximizes recovery, and successfully negotiates the fine line between high and excessive training loads. Monitoring instruments like the Recovery-Stress Questionnaire for Athletes can assist with this research by providing a tool to assess their perceived state of recovery. This article will highlight the importance of recovery for elite athletes and provide an overview of monitoring instruments. © 2010 John Wiley & Sons A/S.

  20. Burnout syndrome--assessment of a stressful job among intensive care staff.

    Science.gov (United States)

    Cubrilo-Turek, Mirjana; Urek, Roman; Turek, Stjepan

    2006-03-01

    The purpose of the study was to investigate the degree of burnout experienced by intensive care staff particularly, in Medical (MICU) and Surgical Intensive Care Units (SICU) General Hospital "Sveti Duh", Zagreb. A sample group of 41 emergency physicians and nurses from MICU and 30 from SICU was tested. The survey included demographic data and Maslach Burnout Inventory (MBI) scoring test identified by the three main components associated with burnout: emotional exhaustion (MBI-EE), depersonalization (MBI-DEP), and personal accomplishment (MBI-PA) were assessed using 22-item questionnaire. The degrees of burnout were stratified into low, moderate, and high range. Mean total MBI (X +/- SD) were high in both groups: higher for the MICU (65.5 +/- 6.7) than for SICU staff (55.7 +/- 3.8, p burnout represented in a moderate degree. The presence of burnout is a serious phenomenon, because it can lead to psychosomatic complaints, work-associated withdrawal behaviour, and a lower quality of care at intensive care units. Early recognition of burnout phenomenon as a result of prolonged stress and frustration among intensive care staff, contributes to better professional behavior, organizational structure changes in the work environment and better health care quality for critically ill patients.

  1. Stress-intensity factor equations for cracks in three-dimensional finite bodies subjected to tension and bending loads

    Science.gov (United States)

    Newman, J. C., Jr.; Raju, I. S.

    1984-01-01

    Stress intensity factor equations are presented for an embedded elliptical crack, a semielliptical surface crack, a quarter elliptical corner crack, a semielliptical surface crack along the bore of a circular hole, and a quarter elliptical corner crack at the edge of a circular hole in finite plates. The plates were subjected to either remote tension or bending loads. The stress intensity factors used to develop these equations were obtained from previous three dimensional finite element analyses of these crack configurations. The equations give stress intensity factors as a function of parametric angle, crack depth, crack length, plate thickness, and, where applicable, hole radius. The ratio of crack depth to plate thickness ranged from 0 to 1, the ratio of crack depth to crack length ranged from 0.2 to 2, and the ratio of hole radius to plate thickness ranged from 0.5 to 2. The effects of plate width on stress intensity variation along the crack front were also included.

  2. Impact of an intensive dynamic exercise program on oxidative stress and on the outcome in patients with fibromyalgia

    Directory of Open Access Journals (Sweden)

    Amal F Soliman

    2016-01-01

    Conclusion Twelve weeks of intensive dynamic exercise program should be recommended to patients with FM as it was effective in decreasing the oxidative stress parameters, increasing the antioxidant parameters, and improving the clinical outcome of this disease.

  3. Stress relaxation of entangled polystyrene solution after constant-rate, uniaxial elongation

    DEFF Research Database (Denmark)

    Matsumiya, Yumi; Masubuchi, Yuichi; Watanabe, Hiroshi

    For an entangled solution of linear polystyrene (PS 545k; M = 545k) in dibutyl phthalate (DBP), the stress relaxation after constant-rate uniaxial elongation was examined with an extensional viscosity fixture mounted on ARES (TA Instruments). The PS concentration, c = 52 wt%, was chosen in a way...... that the entanglement density M/Me of the solution coincided with that of PS 290k melt (M = 290k). After the elongation at the Rouse-based Weissenberg number Wi(R) ~ 3 up to the Hencky strain of 3, the short time stress relaxation of the solution was accelerated by a factor of ~4, which was less significant compared...... and the lack of monotonic thinning observed for the semidilute solutions. Results for less concentrated solutions will be also presented on site....

  4. Stress-intensity factors for cracks emanating from the loaded fastener hole

    Science.gov (United States)

    Shivakumar, V.; Hsu, Y. C.

    1977-01-01

    Using a series approach and the Muskhelishvili formulation in the two-dimensional theory of elasticity, stress-intensity factors K are derived for problems in which cracks emanate radially from the boundary of an arbitrarily loaded internal circular hole in an infinite plate. Numerical values are obtained for K(I) and K(II) for radial cracks from a hole containing a loose-fitted pin or rivet that is pulled perpendicular to the crack direction in the plane of the plate. The method is a general one for determining K for a set of symmetrically emanating radial cracks for a variety of concentrated or distributed tractions on the circular hole.

  5. Mode I Stress Intensity Factors for triangular corner crack nearby intersecting of cylindrical holes

    Directory of Open Access Journals (Sweden)

    E. Salvati

    2013-10-01

    Full Text Available In this paper triangular flaws has been taken into account at the intersection of two holes inside a specified specimen. Influence of bore hole D1/D2 and angle between their axes α are examined. Numerical analysis are performed to determine Stress Intensity factors (SIF in many geometric configurations. Afterwards, fitting weight function’s parameters with FEM results, new SIF analytics expression are shown. Finally, the accuracy of weight functions in SIF predictions for different inner pressure, has been checked as well as the comparison between the SIF of a triangular crack and that of an actual crack shape obtained through a fatigue test.

  6. Stress Corrosion Cracking of an Austenitic Stainless Steel in Nitrite-Containing Chloride Solutions

    Directory of Open Access Journals (Sweden)

    R. K. Singh Raman

    2014-12-01

    Full Text Available This article describes the susceptibility of 316L stainless steel to stress corrosion cracking (SCC in a nitrite-containing chloride solution. Slow strain rate testing (SSRT in 30 wt. % MgCl2 solution established SCC susceptibility, as evidenced by post-SSRT fractography. Addition of nitrite to the chloride solution, which is reported to have inhibitive influence on corrosion of stainless steels, was found to increase SCC susceptibility. The susceptibility was also found to increase with nitrite concentration. This behaviour is explained on the basis of the passivation and pitting characteristics of 316L steel in chloride solution.

  7. Clinical and epidemiological study of stress hyperglycemia among medical intensive care unit patients in Central India

    Directory of Open Access Journals (Sweden)

    Jitendra Sharma

    2017-01-01

    Full Text Available Background: Stress hyperglycemia is common in patients presenting at the emergency medical ward and is associated with poor prognosis and increased risk of mortality. Aims and Objective: To study and determine the prevalence and factors associated with stress hyperglycemia. Materials and Methods: A cross-sectional observational study was performed on 536 nondiabetic patients presented to the Intensive Care Unit (ICU at Gandhi Medical College and allied Hamidia Hospital, Bhopal, between March 31, 2015, and May 28, 2015. A detailed history including demographic profile, presence of chronic disease, history of hospitalization and ICU admission, surgical status, and major reason for ICU admission (i.e., predominant diagnostic category was collected. Hematological and other parameters based on profile of study population were also analyzed. Results: Out of 536 patients, 109 (20.33% had stress hyperglycemia. Out of 109 patients with stress hyperglycemia, 87 (16.23% patients had glycated hemoglobin (HbA1c <5.7% and 22 (4.10% patients had HbA1c between 5.7% and 6.4%. Mean age of the study population was 40.27 ± 1.44 years, with male dominance. Mean random blood glucose level was 181.46 ± 3.80 mg/dl. Frequency of stress hyperglycemia was 24.13% in stroke, 19.54% in multiple organ dysfunction syndrome (MODS, 17.24% in chronic kidney disease (CKD, 12.64% in central nervous system (CNS infection, 8.05% in chronic liver disease (CLD, and 8.05% in seizure patients. Association between stroke and stress hyperglycemia was significant (P = 0.036. Association between hospital stay more than 7 days and stress hyperglycemia was significant in stroke patients (P = 0.0029, CKD patients (P = 0.0036, CLD (P = 0.0099, and MODS patients (P = 0.0328. Conclusions: The factors associated with stress hyperglycemia were stroke, MODS, CKD, CNS infection, CLD, seizure patients, with prolonged hospital stay and expected proportion.

  8. Fear conditioning and shock intensity: the choice between minimizing the stress induced and reducing the number of animals used

    NARCIS (Netherlands)

    Pietersen, C.Y.; Bosker, F.J; Posterna, F.; Den Boer, J.A.

    2006-01-01

    Many fear conditioning studies use electric shock as the aversive stimulus. The intensity of shocks varies throughout the literature. In this study, shock intensities ranging from 0 to 1.5 mA were used, and the effects on the rats assessed by both behavioural and biochemical stress parameters.

  9. Fear conditioning and shock intensity : the choice between minimizing the stress induced and reducing the number of animals used

    NARCIS (Netherlands)

    Pietersen, CY; Bosker, FJ; Posterna, F; den Boer, JA

    Many fear conditioning studies use electric shock as the aversive stimulus. The intensity of shocks varies throughout the literature. In this study, shock intensities ranging from 0 to 1.5 mA were used, and the effects on the rats assessed by both behavioural and biochemical stress parameters.

  10. The physiological stress response to high-intensity sprint exercise following the ingestion of sodium bicarbonate.

    Science.gov (United States)

    Peart, Daniel J; Kirk, Richard J; Hillman, Angela R; Madden, Leigh A; Siegler, Jason C; Vince, Rebecca V

    2013-01-01

    The purpose of this study was to investigate the effects of pre-exercise alkalosis on the physiological stress response to high-intensity exercise. Seven physically active males (age 22 ± 3 years, height 1.82 ± 0.06 m, mass 81.3 ± 8.4 kg and peak power output 300 ± 22 W) performed a repeated sprint cycle exercise following a dose of 0.3 g kg(-1) body mass of sodium bicarbonate (NaHCO(3)) (BICARB), or a placebo of 0.045 g kg(-1) body mass of sodium chloride (PLAC). Monocyte-expressed heat shock protein 72 (HSP72) and plasma thiobarbituric acid reactive substances (TBARS) were significantly attenuated in BICARB compared to PLAC (p = 0.04 and p = 0.039, respectively), however total anti-oxidant capacity, the ratio of oxidised to total glutathione, cortisol, interleukin 6 and interleukin 8 were not significantly induced by the exercise. In conclusion, monocyte-expressed HSP72 is significantly increased following high-intensity anaerobic exercise, and its attenuation following such exercise with the ingestion of NaHCO(3) is unlikely to be due to a decreased oxidative stress.

  11. Photobiomodulation Leads to Reduced Oxidative Stress in Rats Submitted to High-Intensity Resistive Exercise

    Directory of Open Access Journals (Sweden)

    Helenita Antonia de Oliveira

    2018-01-01

    Full Text Available The aim of this study was to determine whether oxidative stress markers are influenced by low-intensity laser therapy (LLLT in rats subjected to a high-intensity resistive exercise session (RE. Female Wistar rats divided into three experimental groups (Ctr: control, 4J: LLLT, and RE and subdivided based on the sampling times (instantly or 24 h postexercise underwent irradiation with LLLT using three-point transcutaneous method on the hind legs, which was applied to the gastrocnemius muscle at the distal, medial, and proximal points. Laser (4J or placebo (device off were carried out 60 sec prior to RE that consisted of four climbs bearing the maximum load with a 2 min time interval between each climb. Lipoperoxidation levels and antioxidant capacity were obtained in muscle. Lipoperoxidation levels were increased (4-HNE and CL markers instantly post-RE. LLLT prior to RE avoided the increase of the lipid peroxidation levels. Similar results were also notified for oxidation protein assays. The GPx and FRAP activities did not reduce instantly or 24 h after RE. SOD increased 24 h after RE, while CAT activity did not change with RE or LLLT. In conclusion, LLLT prior to RE reduced the oxidative stress markers, as well as, avoided reduction, and still increased the antioxidant capacity.

  12. Stress corrosion cracking of Zircaloy-4 in non-aqueous iodine solutions

    International Nuclear Information System (INIS)

    Gomez Sanchez, Andrea V.

    2006-01-01

    In the present work the susceptibility to intergranular attack and stress corrosion cracking of Zircaloy-4 in different iodine alcoholic solutions was studied. The influence of different variables such as the molecular weight of the alcohols, the water content of the solutions, the alcohol type (primary, secondary or tertiary) and the temperature was evaluated. To determine the susceptibility to stress corrosion cracking the slow strain rate technique was used. Specimens of Zircaloy-4 were also exposed between 0.5 and 300 hours to the solutions without applied stress to evaluate the susceptibility to intergranular attack. The electrochemical behavior of the material in the corrosive media was studied by potentiodynamic polarization tests. It was determined that the active species responsible for the stress corrosion cracking of Zircaloy-4 in iodine alcoholic solutions is a molecular complex between the alcohol and iodine. The intergranular attack precedes the 'true' stress corrosion cracking phenomenon (which is associated to the transgranular propagation of the crack) and it is controlled by the diffusion of the active specie to the tip of the crack. Water acts as inhibitor to intergranular attack. Except for methanolic solutions, the minimum water content necessary to inhibit stress corrosion cracking was determined. This critical water content decreases when increasing the molecular weight of the alcohol. An explanation for this behavior is proposed. The susceptibility to stress corrosion cracking also depends on the type of the alcohol used as solvent. The temperature dependence of the crack propagation rate is in agreement with a thermal activated process, and the activation energy is consistent with a process controlled by the volume diffusion of the active species. (author) [es

  13. Exact solutions for MHD flow of couple stress fluid with heat transfer

    Directory of Open Access Journals (Sweden)

    Najeeb Alam Khan

    2016-01-01

    Full Text Available This paper aims at presenting exact solutions for MHD flow of couple stress fluid with heat transfer. The governing partial differential equations (PDEs for an incompressible MHD flow of couple stress fluid are reduced to ordinary differential equations by employing wave parameter. The methodology is implemented for linearizing the flow equations without extra transformation and restrictive assumptions. Comparison is made with the result obtained previously.

  14. Improvement of stress-rupture life of GTD-111 by second solution heat treatment

    International Nuclear Information System (INIS)

    Yang, Caixiong; Xu, Yulai; Zhang, Zixing; Nie, Heng; Xiao, Xueshan; Jia, Guoqing; Shen, Zhi

    2013-01-01

    Highlights: ► The second solution heat treatment promoted the solution of γ–γ′ eutectic into γ matrix. ► The volume fraction of γ′ increases significantly after adding the second solution heat treatment. ► The improved stress-rupture life is primarily due to the increased volume fraction of γ′ phase. -- Abstract: An added second solution heat treatment was conducted to investigate its effects on the microstructures and stress-rupture properties of GTD-111. The microstructures were analyzed by scanning electron microscope after each step of heat treatments. The stress-rupture life of GTD-111 dramatically increases from about 180 to 288 h at 871 °C/310 MPa after adding a second solution heat treatment. The added second solution heat treatment promoted the solution of γ–γ′ eutectic into γ matrix, and facilitated the nucleation and precipitate of the secondary γ′ particles. The distribution of γ′ phase becomes much denser, the width of γ matrix channel is also reduced, and the volume fraction of γ′ phase significantly increases from about 29.3% to 44.2%. The improved stress-rupture life is primarily due to the increased volume fraction of γ′ phase. The carbides mainly consist of MC and a small amount of M 23 C 6 , which may prevent the dislocation moving and/or grain boundary sliding, and further improve the stress-rupture properties of GTD-111.

  15. Effect of Schisandrae on stress system of soldiers undergone high-intensity military training

    Directory of Open Access Journals (Sweden)

    Nan XIA

    2014-03-01

    Full Text Available Objective To explore the changes in basic serum levels of hypothalamus-pituitrin-adrenal (HPA axis, hypothalamus-pituitrin-gonad (HPG axis and proinflammatory cytokines IL-1, IL-2 and IL-6 in repeated acute stress caused by one-week intensive training, and study the effects of oral administration of Schisandrae, salidroside and Schisandrae compound on the contents of those stress hormones and cytokines mentioned above. Methods One hundred and twenty healthy soldiers chosen from junior infantry combat troops who had never received long-term amphibious training were randomly divided into four groups (30 each: group A (Schisandrae compound group, group B (Schisandrae group, group C (salidroside group and group D (control group. Each and every soldier of all the groups underwent high-intensity composite military training, 8 hours per day, for a week. Venous blood sampling was collected at 7:00-8:00 a.m. before and after the training, respectively. Levels of cortisol (CORT, adrenocorticotropic hormone (ACTH, testosterone (T, IL-1, IL-2 and IL-6 in different groups were measured by radioimmunoassay (RIA. The changes in the levels of all the above mentioned hormones and cytokines in every group were observed and compared. Results In group D, as compared with the pre-stress levels, no marked difference was found in the levels of serum CORT and ACTH (P>0.05, but the levels of T and IL-6 significantly decreased (P0.05. In group C, the levels of T and IL-6 significantly decreased (P0.05. In group A, the serum levels of CORT, ACTH, T, IL-1 and IL-6 significantly decreased, while that of IL-2 significantly increased (P<0.01. As compared with group D, the level of ACTH in group A and group B, the level of IL-2 in group C significantly decreased (P<0.05. Conclusions  Schisandrae and Schisandrae compound have a marked and lasting inhibitory effect on the activation of HPA axis and the elevation of serum CORT levels induced by stress, while the similar

  16. Improvement of the calculation of the stress intensity factors for underclad and through-clad defects in a reactor pressure vessel subjected to a pressurised thermal shock

    International Nuclear Information System (INIS)

    Marie, S.; Chapuliot, S.

    2008-01-01

    The analysis of the stability of a defect in a cladded reactor pressure vessel (RPV) of a nuclear pressure water reactor (PWR) subjected to pressurised thermal shock (PTS) is one main elements of the general safety demonstration. Recently, CEA proposed several improved analytical tools for the analysis of the PTS. First, an analytical solution for the vessel through-thickness temperature variation has been developed to deal with any fluid temperature, taking into account the possible presence of a cladding, in the case of an internal PTS. The associated thermal stress expression has been simplified and a complete linearised solution is given for the thermal loading and also for internal pressure, depending on the main vessel material and on the cladding properties. Finally, a complete compendium is also given for the elastic stresses intensity factor calculation. This paper proposes several improvements of the proposed analytical method to deal with a PTS in a PWR cladded vessel. A variable heat transfer coefficient is now taken into account based on an equivalent fluid temperature variation determination, associated with a constant heat transfer coefficient, to keep the same thermal exchange between the fluid and the inner skin of the vessel obtained with the initial data. A more accurate expression for the linearised stresses due to the internal pressure is given, and a possible effect of residual stresses due to the difference between the operating temperature and the stress-free temperature is also taken into account. Finally, an extension of the domain of definition of the influence functions for the elastic stress intensity factor calculation is given

  17. The relation between intensity and complexity of coronary artery lesion and oxidative stress in patients with acute coronary syndrome.

    Science.gov (United States)

    Turan, Turhan; Menteşe, Ümit; Ağaç, Mustafa Tarık; Akyüz, Ali Rıza; Kul, Selim; Aykan, Ahmet Çağrı; Bektaş, Hüseyin; Korkmaz, Levent; Öztaş Menteşe, Seda; Dursun, İhsan; Çelik, Şükrü

    2015-10-01

    Oxidative stress plays a major role in the development of atherosclerosis. However, the relationship between oxidative stress and complexity and intensity of coronary artery disease is less clear. The aim of this study is to assess the relationship between oxidative stress markers and the complexity and intensity of coronary artery disease in patients with acute coronary syndrome (ACS). Sixty-seven consecutive patients with an early phase of ACS (=22). Likewise patients were divided into two CAD severity groups according to the median Gensini score of 64: less intensive CAD with Gensini score (=64. Blood samples were taken in 1 hour within administration in order to measure total oxidative status (TOS) and total antioxidant capacity (TAC) levels determined by Erel method. Oxidative stress index (OSI) was calculated by TOS /TAC. There was no significant difference between the two SYNTAX groups for oxidative stress markers. Median TOS and OSI values were significantly high in the intensive CAD group (p=0.005, p=0.04, respectively). The Gensini score was positively correlated with TOS and OSI (p=0.003, p=0.02, respectively). Oxidative stress markers may be considered supportive laboratory parameters related to CAD intensity but not complexity in ACS patients.

  18. Effect of ubiquinol supplementation on biochemical and oxidative stress indexes after intense exercise in young athletes.

    Science.gov (United States)

    Orlando, Patrick; Silvestri, Sonia; Galeazzi, Roberta; Antonicelli, Roberto; Marcheggiani, Fabio; Cirilli, Ilenia; Bacchetti, Tiziana; Tiano, Luca

    2018-12-01

    Physical exercise significantly impacts the biochemistry of the organism. Ubiquinone is a key component of the mitochondrial respiratory chain and ubiquinol, its reduced and active form, is an emerging molecule in sport nutrition. The aim of this study was to evaluate the effect of ubiquinol supplementation on biochemical and oxidative stress indexes after an intense bout of exercise. 21 male young athletes (26 + 5 years of age) were randomized in two groups according to a double blind cross-over study, either supplemented with ubiquinol (200 mg/day) or placebo for 1 month. Blood was withdrawn before and after a single bout of intense exercise (40 min run at 85% maxHR). Physical performance, hematochemical parameters, ubiquinone/ubiquinol plasma content, intracellular reactive oxygen species (ROS) level, mitochondrial membrane depolarization, paraoxonase activity and oxidative DNA damage were analyzed. A single bout of intense exercise produced a significant increase in most hematochemical indexes, in particular CK and Mb while, on the contrary, normalized coenzyme Q 10 plasma content decreased significantly in all subjects. Ubiquinol supplementation prevented exercise-induced CoQ deprivation and decrease in paraoxonase activity. Moreover at a cellular level, in peripheral blood mononuclear cells, ubiquinol supplementation was associated with a significant decrease in cytosolic ROS while mitochondrial membrane potential and oxidative DNA damage remained unchanged. Data highlights a very rapid dynamic of CoQ depletion following intense exercise underlying an increased demand by the organism. Ubiquinol supplementation minimized exercise-induced depletion and enhanced plasma and cellular antioxidant levels but it was not able to improve physical performance indexes or markers of muscular damage.

  19. Work related stress and its anticipated solutions among post-graduate medical resident doctors: a cross-sectional survey conducted at a tertiary municipal hospital in Mumbai, India.

    Science.gov (United States)

    Rajan, Pavithra; Bellare, Bharati

    2011-03-01

    It is now known that resident doctors registered for postgraduate studies are prone to work related stress and eventual burnout. Though stress can happen in any profession, reduced performance of resident doctors due to vocational stress could cause an increase in medical errors and thus affect the quality of life of the patients. Resident doctors at a Municipal hospital in India form a unique population as number of stresses they undergo are many and varied. To study the prevalence of work-related stress and its anticipated solutions among the resident doctors registered for postgraduate studies in clinical subjects at a tertiary Municipal hospital. A stratified sampling cross-sectional survey was conducted at the Inpatient, Outpatient, and Intensive Care Units at a tertiary Municipal hospital in Mumbai, India. Data collection was done using a validated 20-point questionnaire to assess the factors causing stress and their anticipated solutions. Simple percentage analysis of stress questionnaire. 71 resident doctors completed the survey. The major stressors in this cohort were inadequate hostel/quarter facilities (92.1%), and the need to perform extra duties (80.0%). Also, non-conducive environment for clinical training and studies (81.7%), inadequate study (78.9%) and break (81.2%), threat from deadly infections (74.6%), and overburdening with work (69.0%) were the other major stress causing factors. The perceived stress busters were good music (40.8%) and family and friends (40.8%). Eighty-seven percent of the respondents perceived regular physical exercise to be an effective mode of stress management and 83.8% expressed their need to have a simple therapeutic gymnasium established within the campus with a qualified trainer. There is a high level of work related stress among the resident doctors registered for postgraduate clinical studies at a tertiary Municipal hospital in Mumbai. One of the perceived stress busters is regular physical exercise that is

  20. Hybrid determination of mixed-mode stress intensity factors on discontinuous finite-width plate by finite element and photoelasticity

    International Nuclear Information System (INIS)

    Baek, Tae Hyun; Chen, Lei; Hong, Dong Pyo

    2011-01-01

    For isotropic material structure, the stress in the vicinity of crack tip is generally much higher than the stress far away from it. This phenomenon usually leads to stress concentration and fracture of structure. Previous researches and studies show that the stress intensity factor is one of most important parameter for crack growth and propagation. This paper provides a convenient numerical method, which is called hybrid photoelasticity method, to accurately determine the stress field distribution in the vicinity of crack tip and mixed-mode stress intensity factors. The model was simulated by finite element method and isochromatic data along straight lines far away from the crack tip were calculated. By using the isochromatic data obtained from finite element method and a conformal mapping procedure, stress components and photoelastic fringes in the hybrid region were calculated. To easily compare calculated photoelastic fringes with experiment results, the fringe patterns were reconstructed, doubled and sharpened. Good agreement shows that the method presented in this paper is reliable and convenient. This method can then directly be applied to obtain mixed mode stress intensity factors from the experimentally measured isochromatic data along the straight lines

  1. Posttraumatic stress disorder in children and their parents following admission to the pediatric intensive care unit: a review.

    Science.gov (United States)

    Nelson, Lara P; Gold, Jeffrey I

    2012-05-01

    To evaluate posttraumatic stress disorder in children who have been admitted to the pediatric intensive care unit and their families. Studies were identified through PubMed, MEDLINE, and Ovid. All descriptive, observational, and controlled studies with a focus on posttraumatic stress disorder and the pediatric intensive care unit were included. Posttraumatic stress disorder rates in children following admission to the pediatric intensive care unit were between 5% and 28%, while rates of posttraumatic stress disorder symptoms were significantly higher, 35% to 62%. There have been inconsistencies noted across risk factors. Objective and subjective measurements of disease severity were intermittently positively associated with development of posttraumatic stress disorder. There was a positive relationship identified between the child's symptoms of posttraumatic stress disorder and their parents' symptoms.The biological mechanisms associated with the development of posttraumatic stress disorder in children admitted to the pediatric intensive care unit have yet to be explored. Studies in children following burn or other unintentional injury demonstrate potential relationships between adrenergic hormone levels and a diagnosis of posttraumatic stress disorder. Likewise genetic studies suggest the importance of the adrenergic system in this pathway.The rates of posttraumatic stress disorder in parents following their child's admission to the pediatric intensive care unit ranged between 10.5% and 21%, with symptom rates approaching 84%. It has been suggested that mothers are at increased risk for the development of posttraumatic stress disorder compared to fathers. Objective and subjective measures of disease severity yielded mixed findings with regard to the development of posttraumatic stress disorder. Protective parental factors may include education or the opportunity to discuss the parents' feelings during the admission. Following admission to the pediatric intensive

  2. [Reimbursement of intensive care services in the German DRG system : Current problems and possible solutions].

    Science.gov (United States)

    Riessen, R; Hermes, C; Bodmann, K-F; Janssens, U; Markewitz, A

    2018-02-01

    The reimbursement of intensive care and nursing services in the German health system is based on the diagnosis-related groups (G-DRG) system. Due to the lack of a central hospital planning, the G‑DRG system has become the most important influence on the development of the German health system. Compared to other countries, intensive care in Germany is characterized by a high number of intensive care beds, a low nurse-to-patient ratio, no official definition of the level of care, and a minimal available data set from intensive care units (ICUs). Under the given circumstances, a shortage of qualified intensive care nurses and physicians is currently the largest threat for intensive care in Germany. To address these deficiencies, we suggest the following measures: (1) Integration of ICUs into the levels of care which are currently developed for emergency centers at hospitals. (2) Mandatory collection of structured data sets from all ICUs including quality criteria. (3) A reform of intensive care and nursing reimbursement under consideration of adequate staffing in the individual ICU. (4) Actions to improve ICU staffing and qualification.

  3. Analytical solutions to trade-offs between size of protected areas and land-use intensity.

    Science.gov (United States)

    Butsic, Van; Radeloff, Volker C; Kuemmerle, Tobias; Pidgeon, Anna M

    2012-10-01

    Land-use change is affecting Earth's capacity to support both wild species and a growing human population. The question is how best to manage landscapes for both species conservation and economic output. If large areas are protected to conserve species richness, then the unprotected areas must be used more intensively. Likewise, low-intensity use leaves less area protected but may allow wild species to persist in areas that are used for market purposes. This dilemma is present in policy debates on agriculture, housing, and forestry. Our goal was to develop a theoretical model to evaluate which land-use strategy maximizes economic output while maintaining species richness. Our theoretical model extends previous analytical models by allowing land-use intensity on unprotected land to influence species richness in protected areas. We devised general models in which species richness (with modified species-area curves) and economic output (a Cobb-Douglas production function) are a function of land-use intensity and the proportion of land protected. Economic output increased as land-use intensity and extent increased, and species richness responded to increased intensity either negatively or following the intermediate disturbance hypothesis. We solved the model analytically to identify the combination of land-use intensity and protected area that provided the maximum amount of economic output, given a target level of species richness. The land-use strategy that maximized economic output while maintaining species richness depended jointly on the response of species richness to land-use intensity and protection and the effect of land use outside protected areas on species richness within protected areas. Regardless of the land-use strategy, species richness tended to respond to changing land-use intensity and extent in a highly nonlinear fashion. ©2012 Society for Conservation Biology.

  4. Studies on the influence of metallurgical variables on the stress corrosion behavior of AISI 304 stainless steel in sodium chloride solution using the fracture mechanics approach

    International Nuclear Information System (INIS)

    Khatak, H.S.; Gnanamoorthy, J.B.; Rodriguez, P.

    1996-01-01

    Stress corrosion data on a nuclear grade AISI type 304 stainless steel in a boiling solution of 5M NaCl + 0.15M Na 2 SO 4 + 3 mL/L HCl (bp 381 K) for various metallurgical conditions of the steel are presented in this article. The metallurgical conditions used are solution annealing, sensitization, 10 pct cold work, 20 pct cold work, solution annealing + sensitization, 10 pct cold work + sensitization, and 20 pct cold work + sensitization. The fracture mechanics approach has been used to obtain quantitative data on the stress corrosion crack growth rates. The stress intensity factor, K I , and J integral, J I , have been used as evaluation parameters. The crack growth rates have been measured using compact tension type samples under both increasing and decreasing stress intensity factors. A crack growth rate of 5 x 10 -11 m/s was chosen for the determination of threshold parameters. Results of the optical microscopic and fractographic examinations are presented. Acoustic signals were recorded during crack growth. Data generated from acoustic emissions, activation energy measurements, and fractographic features indicate hydrogen embrittlement as the possible mechanism of cracking

  5. Stress intensity factors of three parallel edge cracks under bending moments

    International Nuclear Information System (INIS)

    Ismail, A E

    2013-01-01

    This paper reports the study of stress intensity factors (SIF) of three edge cracks in a finite plate under bending moments. The goal of this paper was to analyze the three edge crack interactions under such loading. Several studies can be found in literature discussing on mode I SIF. However, most of these studies obtained the SIFs using tensile force. Lack of SIF reported discussing on the SIFs obtained under bending moments. ANSYS finite element program was used to develop the finite element model where singular elements were used to model the cracks. Different crack geometries and parameters were utilized in order to characterize the SIFs. According to the present results, crack geometries played a significant role in determining the SIFs and consequently induced the crack interaction mechanisms

  6. Various methods of numerical estimation of generalized stress intensity factors of bi-material notches

    Directory of Open Access Journals (Sweden)

    Klusák J.

    2009-12-01

    Full Text Available The study of bi-material notches becomes a topical problem as they can model efficiently geometrical or material discontinuities. When assessing crack initiation conditions in the bi-material notches, the generalized stress intensity factors H have to be calculated. Contrary to the determination of the K-factor for a crack in an isotropic homogeneous medium, for the ascertainment of the H-factor there is no procedure incorporated in the calculation systems. The calculation of these fracture parameters requires experience. Direct methods of estimation of H-factors need choosing usually length parameter entering into calculation. On the other hand the method combining the application of the reciprocal theorem (Ψ-integral and FEM does not require entering any length parameter and is capable to extract the near-tip information directly from the far-field deformation.

  7. Stress intensity factors of eccentric cracks in bi-materials plate under mode I loading

    Energy Technology Data Exchange (ETDEWEB)

    Ismail, A. E. [Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor (Malaysia)

    2015-05-15

    Bi-material plates were generally used to joint electronic devices or mechanical components requiring dissimilar materials to be attached. During services, mechanical failure can be occurred due to the formation of cracks at the interfacial joint or away from the centre. Generally, linear elastic fracture mechanics approach is used to characterize these cracks based on stress intensity factors (SIF). Based on the literature survey, the SIFs for the central cracks were easily available. However, the SIFs for eccentric cracks were difficult to obtain. Therefore, this paper presented the SIFs for eccentric cracks subjected to mode I tension loading. Three important parameters were used such as relative crack depth, a/L, relative offset distance, b/L and elastic mismatch, E{sub 1}/E{sub 2} or α. It was found that such parameters significantly affected the characteristic of SIFs and it was depend on the location of cracks.

  8. Low Intensity Physical Exercise Attenuates Cardiac Remodeling and Myocardial Oxidative Stress and Dysfunction in Diabetic Rats

    Directory of Open Access Journals (Sweden)

    C. Gimenes

    2015-01-01

    Full Text Available We evaluated the effects of a low intensity aerobic exercise protocol on cardiac remodeling and myocardial function in diabetic rats. Wistar rats were assigned into four groups: sedentary control (C-Sed, exercised control (C-Ex, sedentary diabetes (DM-Sed, and exercised diabetes (DM-Ex. Diabetes was induced by intraperitoneal injection of streptozotocin. Rats exercised for 9 weeks in treadmill at 11 m/min, 18 min/day. Myocardial function was evaluated in left ventricular (LV papillary muscles and oxidative stress in LV tissue. Statistical analysis was given by ANOVA or Kruskal-Wallis. Echocardiogram showed diabetic groups with higher LV diastolic diameter-to-body weight ratio and lower posterior wall shortening velocity than controls. Left atrium diameter was lower in DM-Ex than DM-Sed (C-Sed: 5.73±0.49; C-Ex: 5.67±0.53; DM-Sed: 6.41±0.54; DM-Ex: 5.81±0.50 mm; P<0.05 DM-Sed vs C-Sed and DM-Ex. Papillary muscle function was depressed in DM-Sed compared to C-Sed. Exercise attenuated this change in DM-Ex. Lipid hydroperoxide concentration was higher in DM-Sed than C-Sed and DM-Ex. Catalase and superoxide dismutase activities were lower in diabetics than controls and higher in DM-Ex than DM-Sed. Glutathione peroxidase activity was lower in DM-Sed than C-Sed and DM-Ex. Conclusion. Low intensity exercise attenuates left atrium dilation and myocardial oxidative stress and dysfunction in type 1 diabetic rats.

  9. Stress in parents of very low birth weight preterm infants hospitalized in neonatal intensive care units. A multicenter study.

    Science.gov (United States)

    Wormald, Francisca; Tapia, José L; Torres, Gabriela; Cánepa, Paula; González, María Aurelia; Rodríguez, Diana; Escobar, Marisol; Reyes, Bernardita; Capelli, Carola; Menéndez, Laura; Delgado, Patricia; Treuer, Sergio; Ramírez, Rodrigo; Borja, Norma; Domínguez, Angélica

    2015-08-01

    The birth of a premature baby is a stressful event for parents. The objective of this study was to determine early stress in parents of very low birth weight infants (VLBWIs) hospitalized in 12 neonatal intensive care units from a South American Neonatal Network, to identify associated factors, and to compare the level of parental stress in public versus private healthcare facilities. Cross-sectional study in mothers/fathers of VLBWIs (500 to 1500 g). Early parental stress was measured using the Parental Stressor Scale, with a score from 1 (low stress) to 5 (high stress). The sociodemographic characteristics of parents and newborn infants were collected and associated with levels of parental stress. The study included 273 fathers/mothers of a total of 218 VLBW preterm infants. The survey was administered at 5.9 ± 2.0 days of life. The average total parental stress was 3.1 ± 0.8, and the highest score was obtained for the parental role subscale (3.6). A lower education level, unemployment, not having held the newborn infant, and respiratory support requirement were associated with higher parental stress levels. Stress was higher among mothers than fathers, and at public facilities versus private ones. Among parents of VLBWIs, a moderate early parental stress was observed. Parental role alteration was the most relevant factor. Parental stress was higher among mothers and at public healthcare facilities. A greater sensitization, further research and interventions in this area are required.

  10. Analytical solution for stress, strain and plastic instability of pressurized pipes with volumetric flaws

    International Nuclear Information System (INIS)

    Cunha, Sérgio B.; Netto, Theodoro A.

    2012-01-01

    The mechanical behavior of internally pressurized pipes with volumetric flaws is analyzed. The two possible modes of circumferentially straining the pipe wall are identified and associated to hypothesized geometries. The radial deformation that takes place by bending the pipe wall is studied by means of axisymmetric flaws and the membrane strain developed by unequal hoop deformation is analyzed with the help of narrow axial flaws. Linear elastic shell solutions for stress and strain are developed, the plastic behavior is studied and the maximum hoop stress at the flaw is related to the undamaged pipe hoop stress by means of stress concentration factors. The stress concentration factors are employed to obtain equations predicting the pressure at which the pipe fails by plastic instability for both types of flaw. These analytical solutions are validated by comparison with burst tests on 3″ diameter pipes and finite element simulations. Forty-one burst tests were carried out and two materials with very dissimilar plastic behavior, carbon steel and austenitic stainless steel, were used in the experiments. Both the analytical and the numerical predictions showed good correlation with the experimentally observed burst pressures. - Highlights: ► An analytical model for the burst of a pipe with a volumetric flaw is developed. ► Deformation, strain and stress are modeled in the elastic and plastic domains. ► The model is comprehensively validated by experiments and numerical simulations. ► The burst pressure model’s accuracy is equivalent to finite element simulations.

  11. Evaluation of finite difference and FFT-based solutions of the transport of intensity equation.

    Science.gov (United States)

    Zhang, Hongbo; Zhou, Wen-Jing; Liu, Ying; Leber, Donald; Banerjee, Partha; Basunia, Mahmudunnabi; Poon, Ting-Chung

    2018-01-01

    A finite difference method is proposed for solving the transport of intensity equation. Simulation results show that although slower than fast Fourier transform (FFT)-based methods, finite difference methods are able to reconstruct the phase with better accuracy due to relaxed assumptions for solving the transport of intensity equation relative to FFT methods. Finite difference methods are also more flexible than FFT methods in dealing with different boundary conditions.

  12. Stress corrosion cracking of zirconium and its alloys in halogenide solutions

    International Nuclear Information System (INIS)

    Farina, Silvia B.

    2001-01-01

    A doctoral thesis developed at the corrosion labs in CNEA a few years ago showed that zirconium and Zircaloy-4 were susceptible to stress corrosion cracking (SCC) in chloride aqueous solutions at potentials above the pitting potential. However, the nature of the phenomenon was not elucidated. On the other hand, references about the subject were scarce and contradictory. The development of new SCC models, in particular, the surface mobility SCC mechanism suggested a review of zirconium and Zircaloy-4 SCC in halogenide aqueous solutions. This mechanism predicts that zirconium should be susceptible to SCC not only in chloride solutions but also in bromide and iodide solutions due to the low melting point of the surface compounds formed by the interaction between the metal and the environment. The present work was aimed to determine the conditions under which SCC takes place and the mechanism operating during this process. For that purpose, the effect of electrochemical potential, strain rate and temperature on the SCC susceptibility of both, zirconium and Zircaloy-4 in chloride, bromide and iodide solutions was investigated. It was observed that those materials undergo stress corrosion cracking only at potentials higher than the breakdown potential. The crack velocity increased slightly with the applied potential, and the strain rate had an accelerating effect on the crack propagation rate. In both materials two steps were found during cracking. The first one was characterized as intergranular attack assisted by stress due to an anodic dissolution process. This step is followed by a transition to a transgranular mode of propagation, which was considered as the 'true' stress corrosion cracking step. The intergranular attack is the rate-determining step due to the fact that the transgranular propagation rate is higher than the intergranular propagation rate. Several stress corrosion cracking mechanisms were analyzed to explain the transgranular cracking. The predictions

  13. High-intensity training reduces intermittent hypoxia-induced ER stress and myocardial infarct size.

    Science.gov (United States)

    Bourdier, Guillaume; Flore, Patrice; Sanchez, Hervé; Pepin, Jean-Louis; Belaidi, Elise; Arnaud, Claire

    2016-01-15

    Chronic intermittent hypoxia (IH) is described as the major detrimental factor leading to cardiovascular morbimortality in obstructive sleep apnea (OSA) patients. OSA patients exhibit increased infarct size after a myocardial event, and previous animal studies have shown that chronic IH could be the main mechanism. Endoplasmic reticulum (ER) stress plays a major role in the pathophysiology of cardiovascular disease. High-intensity training (HIT) exerts beneficial effects on the cardiovascular system. Thus, we hypothesized that HIT could prevent IH-induced ER stress and the increase in infarct size. Male Wistar rats were exposed to 21 days of IH (21-5% fraction of inspired O2, 60-s cycle, 8 h/day) or normoxia. After 1 wk of IH alone, rats were submitted daily to both IH and HIT (2 × 24 min, 15-30m/min). Rat hearts were either rapidly frozen to evaluate ER stress by Western blot analysis or submitted to an ischemia-reperfusion protocol ex vivo (30 min of global ischemia/120 min of reperfusion). IH induced cardiac proapoptotic ER stress, characterized by increased expression of glucose-regulated protein kinase 78, phosphorylated protein kinase-like ER kinase, activating transcription factor 4, and C/EBP homologous protein. IH-induced myocardial apoptosis was confirmed by increased expression of cleaved caspase-3. These IH-associated proapoptotic alterations were associated with a significant increase in infarct size (35.4 ± 3.2% vs. 22.7 ± 1.7% of ventricles in IH + sedenary and normoxia + sedentary groups, respectively, P < 0.05). HIT prevented both the IH-induced proapoptotic ER stress and increased myocardial infarct size (28.8 ± 3.9% and 21.0 ± 5.1% in IH + HIT and normoxia + HIT groups, respectively, P = 0.28). In conclusion, these findings suggest that HIT could represent a preventive strategy to limit IH-induced myocardial ischemia-reperfusion damages in OSA patients. Copyright © 2016 the American Physiological Society.

  14. Stress Intensity of Delamination in a Sintered-Silver Interconnection: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    DeVoto, D. J.; Paret, P. P.; Wereszczak, A. A.

    2014-08-01

    In automotive power electronics packages, conventional thermal interface materials such as greases, gels, and phase-change materials pose bottlenecks to heat removal and are also associated with reliability concerns. The industry trend is toward high thermal performance bonded interfaces for large-area attachments. However, because of coefficient of thermal expansion mismatches between materials/layers and resultant thermomechanical stresses, adhesive and cohesive fractures could occur, posing a reliability problem. These defects manifest themselves in increased thermal resistance. This research aims to investigate and improve the thermal performance and reliability of sintered-silver for power electronics packaging applications. This has been experimentally accomplished by the synthesis of large-area bonded interfaces between metalized substrates and copper base plates that have subsequently been subjected to thermal cycles. A finite element model of crack initiation and propagation in these bonded interfaces will allow for the interpretation of degradation rates by a crack-velocity (V)-stress intensity factor (K) analysis. A description of the experiment and the modeling approach are discussed.

  15. Effect of elastic anisotropy of crystal grain on stress intensity factor

    International Nuclear Information System (INIS)

    Kamaya, Masayuki

    2002-01-01

    The stress intensity factor (SIF) is used widely for evaluating integrity of cracked components. Usually, the SIF obtained under isotropic elastic conditions is used for the evaluations. Although, macroscopic elastic behaviors of polycrystal materials can be considered isotropic, each crystal has anisotropic elastic properties. This implies that if the crack size is small and the influence of anisotropic elastic properties on the stress around cracks is significant, the SIF evaluated under anisotropic elastic conditions may differ from the SIF obtained under isotropic elastic conditions. In the present study, the effect of anisotropic elasticity on the SIF was evaluated by using the finite element analysis (FEA). First, the SIF of semi-circular cracks located in a single crystal was evaluated. It was found that the SIF is affected crystal orientation. Secondly, FEA using a polycrystal model was performed. It was found that the change in the SIF was caused by crack tip crystal orientation as well as the deformation constraint from neighboring crystals. Finally, the statistical tendency of change in the SIF caused by the anisotropic elastic properties and the relationship with crack size were examined. The influence of the local SIF on crack growth behavior is also discussed. (author)

  16. Effect of elastic anisotropy of crystal grain on stress intensity factor

    Energy Technology Data Exchange (ETDEWEB)

    Kamaya, Masayuki [Inst. of Nuclear Safety System Inc., Mihama, Fukui (Japan)

    2002-09-01

    The stress intensity factor (SIF) is used widely for evaluating integrity of cracked components. Usually, the SIF obtained under isotropic elastic conditions is used for the evaluations. Although, macroscopic elastic behaviors of polycrystal materials can be considered isotropic, each crystal has anisotropic elastic properties. This implies that if the crack size is small and the influence of anisotropic elastic properties on the stress around cracks is significant, the SIF evaluated under anisotropic elastic conditions may differ from the SIF obtained under isotropic elastic conditions. In the present study, the effect of anisotropic elasticity on the SIF was evaluated by using the finite element analysis (FEA). First, the SIF of semi-circular cracks located in a single crystal was evaluated. It was found that the SIF is affected crystal orientation. Secondly, FEA using a polycrystal model was performed. It was found that the change in the SIF was caused by crack tip crystal orientation as well as the deformation constraint from neighboring crystals. Finally, the statistical tendency of change in the SIF caused by the anisotropic elastic properties and the relationship with crack size were examined. The influence of the local SIF on crack growth behavior is also discussed. (author)

  17. [Stress level assessment of the nursing staff in the Intensive Care Unit of a university hospital].

    Science.gov (United States)

    Carrillo-García, C; Ríos-Rísquez, M I; Martínez-Hurtado, R; Noguera-Villaescusa, P

    2016-01-01

    The objective was to determine the work stress level among nursing staff in the Intensive Care Unit of a university hospital and to analyse its relationship with the various sociodemographic and working variables of the studied sample. A study was designed using a quantitative, descriptive and cross-sectional approach. The target population of the study was the nursing staff selected by non-random sampling. The instrument used was the Job Content Questionnaire. Data analysis was performed using SPSS 20. The mean, ranges and standard deviation for each of the variables were calculated. A bivariate analysis was also performed on the social and occupational variables of the sample. The participation rate was 80.90% (N=89). The mean of the Social support dimension was 3.13±0.397, for the Psychological demands at work dimension it was 3.10±0.384, with a mean of 2.96±0.436 being obtained for the Control over the work dimension. In the analysis of sociodemographic and work variables of the sample, only the professional category was significant, with nurses recording higher values in perception of job demands and control over their work compared to nursing assistants. In conclusion, there is a moderate perception of work stress in the analysed group of professionals. Among the sources of stress in the workplace was the low control in decision-making by practitioners, as well as the need to continually learn new things. On the other hand, the support received from colleagues is valued positively by the sample. Copyright © 2016 Elsevier España, S.L.U. y SEEIUC. All rights reserved.

  18. Development of a screening measure of stress for parents of children hospitalised in a Paediatric Intensive Care Unit.

    Science.gov (United States)

    Rodríguez-Rey, Rocío; Alonso-Tapia, Jesús

    2016-08-01

    Having a child admitted to intensive care is a highly stressful experience for parents; however there is a lack of screening instruments of parental stress in that context, which would be useful for both, research and clinical purposes. (1) To validate a brief measure of parental stress based on the Parental Stressor Scale: Paediatric Intensive Care Unit (PSS:PICU), (2) to study which environmental factors of the PICU are more stressful in a sample of Spanish parents, and (3) to study which variables are related to higher levels of stress among this group. 196 Spanish parents completed the Abbreviated PSS: PICU (A-PSS:PICU) and a general stress scale (the Perceived Stress Scale) upon their child's discharge to test the convergent validity of the tool. Three months later, they were assessed anxiety and depression using the Hospital Anxiety and Depression Scale, and posttraumatic stress with the Davidson Trauma Scale in order to test the predictive validity of the A-PSS:PICU. Two factors emerged from Confirmatory Factor Analyses, (1) stress due to child's condition and (2) stress related to PICU's staff. The A-PSS:PICU showed adequate reliability and convergent and predictive validity. The most stressful aspects were the behaviours and emotional responses of their child and the loss of their parental role. Age, gender, child's condition, length of admission, spiritual beliefs, and mechanical ventilation were associated to parental stress scores. The A-PSS:PICU is a reliable and valid measure. Parental stress should be screened during a child's PICU admission to identify parents at risk of post-discharge distress. Copyright © 2016 Australian College of Critical Care Nurses Ltd. Published by Elsevier Ltd. All rights reserved.

  19. Laplace-SGBEM analysis of the dynamic stress intensity factors and the dynamic T-stress for the interaction between a crack and auxetic inclusions

    Science.gov (United States)

    Kwon, Kibum

    A dynamic analysis of the interaction between a crack and an auxetic (negative Poisson ratio)/non-auxetic inclusion is presented. The two most important fracture parameters, namely the stress intensity factors and the T-stress are analyzed by using the symmetric Galerkin boundary element method in the Laplace domain for three different models of crack-inclusion interaction. To investigate the effects of auxetic inclusions on the fracture behavior of composites reinforced by this new type of material, comparisons of the dynamic stress intensity factors and the dynamic T-stress are made between the use of auxetic inclusions as opposed to the use of traditional inclusions. Furthermore, the technique presented in this research can be employed to analyze for the interaction between a crack and a cluster of auxetic/non-auxetic inclusions. Results from the latter models can be employed in crack growth analysis in auxetic-fiber-reinforced composites.

  20. Stress corrosion cracking of 350 maraging steel in 3.5 Wt. % NaCl solution

    International Nuclear Information System (INIS)

    Hussain, I.; Hussain, T.; Tauqir, A.; Hashmi, F.H.; Khan, A.Q.

    1993-01-01

    Stress corrosion behavior of 350 maraging steel in 3.5 wt.% NaCl solution was investigated. The results suggest that the steel is susceptible to stress corrosion cracking as the time to failure was always considerably shorter, as compared to those in air at the same stress level. The fracture mode was nearly intergranular and occasionally transgranular. There was no definite trend for the different modes of failure. The strain rate effect was also considered and the results show that the stress corrosion cracks were absent at strain rate high than 1.97 x 10/sup -4/S/sup -1/ and lower than 1.29 x 10/sup -7/S/sup -1/. The critical strain rate range was found to be between 6.4 x 10/sup -7/ to 3.24 x10/sup -5/S /sup -1/. (author)

  1. Post-stress recovery of pituitary-adrenal hormones and glucose, but not the response during exposure to the stressor, is a marker of stress intensity in highly stressful situations.

    Science.gov (United States)

    Márquez, Cristina; Belda, Xavier; Armario, Antonio

    2002-02-01

    Acute immobilization in male rats elicited the same ACTH, corticosterone and glucose response as foot shock when measured immediately after stress. However, post-stress recovery of plasma ACTH, corticosterone and glucose levels were delayed in immobilized versus shocked rats. Similarly, stress-induced anorexia was much greater in the former animals. All these data suggest that post-stress speed of recovery of some physiological variables is positively related to stressor intensity and could be used to evaluate it.

  2. Intermittent fasting modulates IgA levels in the small intestine under intense stress: a mouse model.

    Science.gov (United States)

    Lara-Padilla, Eleazar; Godínez-Victoria, Marycarmen; Drago-Serrano, Maria Elisa; Reyna-Garfias, Humberto; Arciniega-Martínez, Ivonne Maciel; Abarca-Rojano, Edgar; Cruz-Hernández, Teresita Rocío; Campos-Rodríguez, Rafael

    2015-08-15

    Intermittent fasting prolongs the lifespan and unlike intense stress provides health benefits. Given the role of the immunoglobulin A (IgA) in the intestinal homeostasis, the aim of this study was to assess the impact of intermittent fasting plus intense stress on secretory IgA (SIgA) production and other mucosal parameters in the duodenum and ileum. Two groups of six mice, with intermittent fasting or fed ad libitum for 12weeks, were submitted to a session of intense stress by a bout of forced swimming. Unstressed ad libitum fed or intermittently fasted groups were included as controls. After sacrifice, we evaluated intestinal SIgA and plasma adrenal hormones, lamina propria IgA+ plasma-cells, mRNA expression of polymeric immunoglobulin receptor, α- and J-chains in the liver and intestinal mucosa, as well as pro- (tumor necrosis factor-α, interleukin-6 and Interferon-γ) and anti- (interleukin-2, -4, -10 and transforming growth factor-β) inflammatory cytokines in mucosal samples. Under intense stress, intermittent fasting down- or up-modulated the levels of most parameters in the duodenum and ileum, respectively while up-regulated corticosterone levels without affecting epinephrine. Our data suggest intermittent fasting plus intense stress elicited neuroendocrine pathways that differentially controlled IgA and pIgR expression in duodenum and ileum. These findings provide experimental foundations for a presumable impact of intermittent fasting under intense stress on the intestinal homeostasis or inflammation by triggering or reducing the IgA production in ileum or duodenum respectively. Copyright © 2015 Elsevier B.V. All rights reserved.

  3. Effect of Trailing Intensive Cooling on Residual Stress and Welding Distortion of Friction Stir Welded 2060 Al-Li Alloy

    Science.gov (United States)

    Ji, Shude; Yang, Zhanpeng; Wen, Quan; Yue, Yumei; Zhang, Liguo

    2018-04-01

    Trailing intensive cooling with liquid nitrogen has successfully applied to friction stir welding of 2 mm thick 2060 Al-Li alloy. Welding temperature, plastic strain, residual stress and distortion of 2060 Al-Li alloy butt-joint are compared and discussed between conventional cooling and trailing intensive cooling using experimental and numerical simulation methods. The results reveal that trailing intensive cooling is beneficial to shrink high temperature area, reduce peak temperature and decrease plastic strain during friction stir welding process. In addition, the reduction degree of plastic strain outside weld is smaller than that inside weld. Welding distortion presents an anti-saddle shape. Compared with conventional cooling, the reductions of welding distortion and longitudinal residual stresses of welding joint under intense cooling reach 47.7 % and 23.8 %, respectively.

  4. [Shortage of physicians in anaesthesiology and intensive care medicine - Causes, consequences and solutions].

    Science.gov (United States)

    Papenfuß, Tim; Roch, Carmen

    2012-05-01

    74% of all hospitals had vacant positions in 2011, also departments of anaesthesiology and intensive care medicine. More than 50% of these departments work with locums. There are couple of reasons for the shortage of physicians. The consequences in anaesthesiology and intensive care medicine can result in qualitative and financial loss. To solve the shortage of physicians one has to solve the reasons. Main reasons are increasing feminization of medical profession and part-time-work, work-life-balance and a poor specialised education. © Georg Thieme Verlag Stuttgart · New York.

  5. Effects of Light Intensity on Growth, Anti-Stress Ability and Immune Function in Yellow Feathered Broilers

    Directory of Open Access Journals (Sweden)

    YL Guo

    Full Text Available ABSTRACT An experiment was conducted to investigate the effects of light intensity on growth, anti-stress ability, and immune function of yellow feathered broilers. A total of 480 one-day-old male Lingnan yellow feathered broilers were randomly allocated to 4 treatments based on light intensity (1, 5, 20 and 80 lx with 8 replicates of 15 chicks each. The experiment lasted for 63 days. Compared with those under high light intensity, broilers exposed to low light intensity had higher (p<0.05 total antioxidant capacity (T-AOC, glutathione peroxidase (GSH-Px, a-Naphthylacetate esterase (ANAE+, antibody titer, but lower (p<0.05 malonaldehyde (MDA levels and heterophil/lymphocyte ratio (H/L. There was a linear effect for T-AOC(p=0.002, GSH-Px(p≤0.047, MDA (p=0.003, H/L(p≤0.014, ANAE+ (p≤0.044, and antibody titer (p≤0.021 with T-AOC, GSH-Px, ANAE+, and antibody titer increased significantly as light intensity decreased, whereas MDA and H/L were decreased with the decrease in light intensity. These results suggested that broilers under low light intensity could have similar performance, better anti-stress ability, stronger immune function, and more efficient in energy usage as compared with those exposed to high light intensity environment.

  6. Osmotic stress alters the balance between organic and inorganic solutes in flax (Linum usitatissimum).

    Science.gov (United States)

    Quéro, Anthony; Molinié, Roland; Elboutachfaiti, Redouan; Petit, Emmanuel; Pau-Roblot, Corinne; Guillot, Xavier; Mesnard, François; Courtois, Josiane

    2014-01-01

    Flax (Linum usitatissimum) is grown for its oil and its fiber. This crop, cultivated in temperate regions, has seen a renewed interest due to the presence of abundant molecules of interest for many applications. Little information is available about the behavior of flax during osmotic stress; yet this is considered a major stress that causes significant yield losses in most crops. To control the presence of this stress better, flax behavior was investigated following the application of osmotic stress and the response was examined by applying increasing concentrations of PEG 8000. This resulted in the reorganization of 32 metabolites and 6 mineral ions in the leaves. The analysis of these two types of solute highlighted the contrasting behavior between a higher metabolite content (particularly fructose, glucose and proline) and a decrease in mineral ions (especially nitrate and potassium) following PEG treatment. However, this reorganization did not lead to a greater accumulation of solutes, with the total amount remaining unchanged in leaves during osmotic stress. Copyright © 2013 Elsevier GmbH. All rights reserved.

  7. Stress Corrosion Cracking of Zircaloy-4 in Halide Solutions: Effect of Temperature

    Directory of Open Access Journals (Sweden)

    Farina S.B.

    2002-01-01

    Full Text Available Zircaloy-4 was found to be susceptible to stress corrosion cracking in 1 M NaCl, 1 M KBr and 1 M KI aqueous solutions at potentials above the pitting potential. In all the solutions tested crack propagation was initially intergranular and then changed to transgranular. The effect of strain rate and temperature on the SCC propagation was investigated. An increase in the strain rate was found to lead to an increase in the crack propagation rate. The crack propagation rate increases in the three solutions tested as the temperatures increases between 20 and 90 °C. The Surface-Mobility SCC mechanism accounts for the observation made in the present work, and the activation energy predicted in iodide solutions is similar to that found in the literature.

  8. Plannig strategy for radiotherapic treatment oa patients with prosthetic hip. Solution of intensity

    International Nuclear Information System (INIS)

    Puertolas Hernandez, J. R.; Iriondo Igerabide, U.; Lozano Flores, F. J.; Pino Leon, C.; Larretxea Etxarri, R.

    2013-01-01

    The intensity modulated radiation therapy (IMRT) can offer better plans, defining the prosthesis as critical structure that limit the dose. In our case, in the last year we have made five planning hip replacement cases, and one case with two prostheses (bilateral). We are introducing the strategy we use to carry out these planning. (Author)

  9. Innovative solutions: sample financial management business plan: neurosurgical intensive care unit.

    Science.gov (United States)

    Villanueva-Baldonado, Analiza; Barrett-Sheridan, Shirley E

    2010-01-01

    This article describes one institution's intention to implement a financial management business plan for a neurosurgical intensive care unit in a level I trauma center. The financial objective of this proposed business plan includes a service increase in the patient population requiring critical care in a way that will help control costs.

  10. Study on the relationship between stress intensity factor and J integral for mixed mode crack with arbitrary inclination based on SBFEM

    International Nuclear Information System (INIS)

    Zhu, C L; Li, J B; Lin, G; Zhong, H

    2010-01-01

    The J integral and the stress intensity factor (SIF) K are both important research objects of fracture mechanics, and are often employed to establish criteria for crackpropagation. The relationship between them has always been a research hotspot. In this paper, the SIF can be obtained conveniently by the scaled boundary finite element method (SBFEM) due to the fact that analytical solution can be obtained along the radial direction for stress singularity problems. The J integral can be solved analytically using the formulae between J and K for mixed mode crack with arbitrary inclination in elastic materials. Moreover, the J integral values obtained by this method are more accurate and convenient than by its definition. Factors that affect the accuracy of SIF and J integral, such as the distance between the crack and outer boundary, size of the discretized elements and partition of the domain into super-elements, are examined.

  11. Stress-intensity factors for a thick-walled cylinder containing an annular imbedded or external or internal surface crack

    Science.gov (United States)

    Erdol, R.; Erdogan, F.

    1976-01-01

    The elastostatic axisymmetric problem for a long thick-walled cylinder containing a ring-shaped internal or edge crack is considered. Using the standard transform technique the problem is formulated in terms of an integral equation which has a simple Cauchy kernel for the internal crack and a generalized Cauchy kernel for the edge crack as the dominant part. As examples the uniform axial load and the steady-state thermal stress problems have been solved and the related stress intensity factors have been calculated. Among other findings the results show that in the cylinder under uniform axial stress containing an internal crack the stress intensity factor at the inner tip is always greater than that at the outer tip for equal net ligament thicknesses and in the cylinder with an edge crack which is under a state of thermal stress the stress intensity factor is a decreasing function of the crack depth, tending to zero as the crack depth approaches the wall thickness.

  12. The first example of intensive luminescence of LMCT state based on metal complexes in solution

    International Nuclear Information System (INIS)

    Lukova, G.V.; Vasil'ev, V.P.; Smirnov, V.A.; Huhn, W.

    2007-01-01

    A bridge complex rac-C 6 H 10 (IndH 4 ) 2 ZrC 2 , featuring a unique long-living luminescence in liquid solutions at 20 deg C, has been prepared for the first time by catalytic hydrogenation of bis-indinyl complex C 6 H 10 (Ind) 2 Zr 2 Cl 2 . It has been identified that quantum yields of luminescence of the complex solutions at room temperature are the greatest ones for the known compounds possessing emission states of charge transfer from ligand to metal. Linear correlations of quantum yield of metal complex luminescence in a solution with steric features of the solvent molecules have been detected for the first time [ru

  13. Counterbalancing work-related stress? Work engagement among intensive care professionals.

    Science.gov (United States)

    van Mol, Margo M C; Nijkamp, Marjan D; Bakker, Jan; Schaufeli, Wilmar B; Kompanje, Erwin J O

    2018-07-01

    Working in an Intensive Care Unit (ICU) is increasingly complex and is also physically, cognitively and emotionally demanding. Although the negative emotions of work-related stress have been well studied, the opposite perspective of work engagement might also provide valuable insight into how these emotional demands may be countered. This study focused on the work engagement of ICU professionals and explored the complex relationship between work engagement, job demands and advantageous personal resources. This was a cross-sectional survey study among ICU professionals in a single-centre university hospital. Work engagement was measured by the Utrecht Work Engagement Scale, which included items about opinions related to the respondent's work environment. Additionally, 14 items based on the Jefferson Scale of Physician Empathy were included to measure empathic ability. A digital link to the questionnaire was sent in October 2015 to a population of 262 ICU nurses and 53 intensivists. The overall response rate was 61% (n=193). Work engagement was negatively related both to cognitive demands among intensivists and to emotional demands among ICU nurses. No significant relationship was found between work engagement and empathic ability; however, agreeableness, conscientiousness, and emotional stability were highly correlated with work engagement. Only the number of hours worked per week remained as a confounding factor, with a negative effect of workload on work engagement after controlling for the effect of weekly working hours. Work engagement counterbalances work-related stress reactions. The relatively high workload in ICUs, coupled with an especially heavy emotional burden, may be acknowledged as an integral part of ICU work. This workload does not affect the level of work engagement, which was high for both intensivists and nurses despite the known high job demands. Specific factors that contribute to a healthy and successful work life among ICU professionals need

  14. Sparing functional anatomical structures during intensity-modulated radiotherapy: an old problem, a new solution.

    Science.gov (United States)

    Tan, Wenyong; Han, Guang; Wei, Shaozhong; Hu, Desheng

    2014-08-01

    During intensity-modulated radiotherapy, an organ is usually assumed to be functionally homogeneous and, generally, its anatomical and spatial heterogeneity with respect to radiation response are not taken into consideration. However, advances in imaging and radiation techniques as well as an improved understanding of the radiobiological response of organs have raised the possibility of sparing the critical functional structures within various organs at risk during intensity-modulated radiotherapy. Here, we discuss these structures, which include the critical brain structure, or neural nuclei, and the nerve fiber tracts in the CNS, head and neck structures related to radiation-induced salivary and swallowing dysfunction, and functional structures in the heart and lung. We suggest that these structures can be used as potential surrogate organs at risk in order to minimize their radiation dose and/or irradiated volume without compromising the dose coverage of the target volume during radiation treatment.

  15. A method of solution of the elastic-plastic thermal stress problem

    International Nuclear Information System (INIS)

    Rafalski, P.

    1975-01-01

    The purpose of the work is an improvement of the numerical technique for calculating the thermal stress distribution in an elastic-plastic structural element. The work consists of two parts. In the first a new method of solution of the thermal stress problem for the elastic-plastic body is presented. In the second a particular numerical technique, based on the above method, for calculating the stress and strain fields is proposed. A new mathematical approach consists in treating the stress and strain fields as mathematical objects defined in the space-time domain. The methods commonly applied use the stress and strain fields defined in the space domain and establish the relations between them at a given instant t. They reduce the problem to the system of ordinary differential equations with respect to time, which are usually solved with a step-by-step technique. The new method reduces the problem to the system of nonlinear algebraic equations. In the work the Hilbert space of admissible tensor fields is constructed. This space is the orthogonal sum of two subspaces: of statically admissible and kinematically admissible fields. Two alternative orthogonality conditions, which correspond to the equilibrium and compatibility equations with the appropriate boundary conditions, are derived. The results of the work are to be used for construction of the computer program for calculation the stress and strain fields in the elastic-plastic body with a prescribed temperature field in the interior and appropriate displacement and force conditions on the boundary

  16. A new plastic correction for the stress intensity factor of an under-clad defect in a PWR vessel subjected to a pressurised thermal shock

    International Nuclear Information System (INIS)

    Marie, S.; Nedelec, M.

    2007-01-01

    For the assessment of an under-clad defect in a vessel subjected to a cold pressurised thermal shock, plasticity is considered through the amplification β of the elastic stress intensity factor K I in the ferritic part of the vessel. An important effort has been made recently by CEA to improve the analytical tools in the frame of R and D activities funded by IRSN. The current solution in the French RSE-M code has been developed from fitted F.E. calculation results. A more physical solution is proposed in this paper. This takes into account two phenomena: the amplification of the elastic K I due to plasticity in the cladding and a plastic zone size correction in the ferritic part. The first correction has been established by representing the cladding plasticity by an imposed displacement on the crack faces at the interface between the cladding and the ferritic vessel. The corresponding elastic stress intensity factor is determined from the elastic plane strain asymptotic solution for the opening displacement. Plasticity in the ferritic steel is considered through a classical plastic zone size correction. The application of the solution to axisymmetric defects is first checked. The case of semi-elliptical defects is also investigated. For the correction determined at the interface between the cladding and the ferritic vessel, an amplification of the correction proposed for the deepest point is determined from a fitting of the 3D F.E. calculation results. It is also shown that the proposition of RSE-M, which consists in applying the same β correction at the deepest point and the interface point is not suitable. The applicability to a thermal shock, eventually combined with an internal pressure has been verified. For the deepest point, the proposed correction leads to similar results to the RSE-M method, but presents an extended domain of validity (no limits on the crack length are imposed)

  17. Stress, strain, and structural dynamics an interactive handbook of formulas, solutions, and Matlab toolboxes

    CERN Document Server

    Yang, Bingen

    2005-01-01

    Stress, Strain, and Structural Dynamics is a comprehensive and definitive reference to statics and dynamics of solids and structures, including mechanics of materials, structural mechanics, elasticity, rigid-body dynamics, vibrations, structural dynamics, and structural controls. This text integrates the development of fundamental theories, formulas and mathematical models with user-friendly interactive computer programs, written in the powerful and popular MATLAB. This unique merger of technical referencing and interactive computing allows instant solution of a variety of engineering problems

  18. Comparison of Effects of Soy Oil, Olive Oil, Mct-Lct Based Nutrition Solutions in Parenterally Fed Intensive Care Patients

    Directory of Open Access Journals (Sweden)

    Nurşen Gürsoy

    2012-08-01

    Full Text Available Objective: In this study, we aimed to compare the changes in biochemical parameters and efficacy of nutrition by using parenteral nutrition solutions with different lipid content in critically ill patients. Material and Method: Fourty-five intensive care patients were randomized into three groups to receive either soy bean based (Group 1 or olive oil based (Group 2 or MCT/LCT based (Group 3 nutrition solutions. The calorie requirement was calculated using Schofield equation day. The levels of albumin, total protein, AST, ALT, LDH, GGT, ALP, glucose, triglyceride, cholesterol, LDL, HDL, aPTT, PT, INR, CRP, transferin and prealbumin were measured on days 1, 7 and 14. Results: There was no statistically significant difference between groups according to glucose, liver function tests, triglyceride, cholesterol, LDL, HDL, aPTT, PT, INR levels. CRP and prealbumin were similar within-group and between-group comparisons. In groups II and III, CRP levels decreased while prealbumin levels were increasing. Conclusion: As a conclusion, no difference was found comparing the biochemical parameters and efficacy of nutrition, in ICU patients fed with soy oil, olive oil or MCT/LCT based parenteral nutrition solutions. (Journal of the Turkish Society Intensive Care 2012; 10: 52-8

  19. The five-factor model of personality, work stress and professional quality of life in neonatal intensive care unit nurses.

    Science.gov (United States)

    Barr, Peter

    2018-06-01

    The study aim was to determine the direct and indirect relations of the five-factor model of personality traits and work stress with professional quality of life in neonatal nurses. Neonatal intensive care nursing has positive and negative effects on neonatal nurses' psychological well-being. Although individual and situational factors interact to influence professional quality of life, there have been few studies of these relationships in neonatal nurses. A cross-sectional study conducted in 2016. Self-report questionnaires were used to measure professional quality of life (burnout, secondary traumatic stress and compassion satisfaction), five-factor model of personality traits (neuroticism, agreeableness, extraversion, conscientiousness and openness) and work stress (role ambiguity, role conflict and role overload). One hundred and forty (34%) of 405 eligible neonatal nurses provided the data. After controlling for work stress, neuroticism and agreeableness were related to burnout, neuroticism was related to secondary traumatic stress, and extraversion was related to compassion satisfaction. Work stress controlled for personality traits was related to burnout and secondary traumatic stress, but not to compassion satisfaction. Neuroticism moderated the effect of work stress on secondary traumatic stress and agreeableness and openness moderated the effect of work stress on compassion satisfaction. Work stress mediated the effect of neuroticism and extraversion on burnout and the effects of extraversion and conscientiousness on compassion satisfaction. Strategies to reduce work stress may not lessen burnout and secondary traumatic stress or increase compassion satisfaction in neonatal nurses who are prone to high neuroticism, low agreeableness and low extraversion. © 2018 John Wiley & Sons Ltd.

  20. Correlation between passive film-induced stress and stress corrosion cracking of α-Ti in a methanol solution at various potentials

    International Nuclear Information System (INIS)

    Guo, X.Z.; Gao, K.W.; Chu, W.Y.; Qiao, L.J.

    2003-01-01

    The flow stress of a specimen of α-Ti before unloading is different with the yield stress of the same specimen after unloading and forming a passive film through immersing in a methanol solution at various constant potentials. The difference is the passive film-induced stress. The film-induced stress and susceptibility to stress corrosion cracking (SCC) in the methanol solution at various potentials were measured. At the stable open-circuit potential and under anodic polarization, both film-induced tensile stress σ p and susceptibility to SCC had a maximum value. The film-induced stress and SCC susceptibility, however, decreased steeply with a decrease in potential under cathodic polarization. When the potential V≤-280 mV SCE , the film-induced stress became compressive; correspondingly, susceptibility to SCC was zero. Therefore, the variation of film-induced stress with potential was consistent with that of susceptibility to SCC. A large film-induced tensile stress is the necessary condition for SCC of α-Ti in the methanol solution. The symbol and amount of the film-induced stress were related to the compositions of the passive film, which have been analyzed using the X-ray photoelectron spectrum (XPS)

  1. Analytical Solution of Tunnel Surrounding Rock for Stress and Displacement Based on Lade–Duncan Criterion

    Directory of Open Access Journals (Sweden)

    MingZheng Zhu

    2018-01-01

    Full Text Available The deformation and failure of tunnel surrounding rock is the result of tunnel excavation disturbance and rock stress release. When the local stress of surrounding rock exceeds the elastic limit of rock mass, the plastic analysis of surrounding rock must be carried out to judge the stability of tunnel. In this study, the Lade–Duncan yield criterion is used to calculate the analytic solutions for the surrounding rock in a tunnel, and the radius and displacement of the plastic zone are deduced using an equilibrium equation. The plastic zone radius and displacement based on Lade–Duncan criterion and Mohr–Coulomb criterion were compared by using single-factor analysis method under the different internal friction angles, in situ stresses, and support resistances. The results show that the solutions of the radius and displacement of plastic zone calculated by the Lade–Duncan criterion are close to those of Mohr–Coulomb criterion under the high internal friction angle and support resistance or low in situ rock stress; however, the radius and displacement of the plastic zone calculated by the Lade–Duncan criterion are larger under normal circumstances, and the Lade–Duncan criterion is more applicable to the stability analysis of the surrounding rock in a tunnel.

  2. Posttraumatic stress disorder (PTSD) in children after paediatric intensive care treatment compared to children who survived a major fire disaster

    NARCIS (Netherlands)

    Bronner, M.B.; Knoester, H.; Bos, AP; Last, B.F.; Grootenhuis, M.A.

    2008-01-01

    Background: The goals were to determine the presence of posttraumatic stress disorder (PTSD) in children after paediatric intensive care treatment, to identify risk factors for PTSD, and to compare this data with data from a major fire disaster in the Netherlands. Methods: Children completed the

  3. [Oxidative stress in Masters swimmers following high-intensity (interval) training (HI(I)T)].

    Science.gov (United States)

    Braun, Janina; Masoud, Magd; Brixius, Klara; Brinkmann, Christian

    2016-05-01

    Increased oxidative stress (OS) can promote diseases in the long term, but it can also trigger cellular adaptations in the short term. The present study aims to analyze whether a 3-month high-intensity (interval) training (HI(I)T) affects OS in 24 Masters swimmers (22-67 years) before (= basal) and after an all-out performance (swimming step-test). Data were analyzed for the entire group and differentiated according to sex and age (under 50 years (U50) and over 50 years (O50)). Prior to the HI(I)T intervention, a significant increase in OS from the basal to the all-out value was observed among the entire group and in the O50-subjects (subgroup analysis). Furthermore, significant increases in basal OS were evident for the entire group post-HI(I)T, but OS was only significantly increased in men in the subgroup analysis. No significant results were observed for women and U50-subjects. The response by Masters swimmers to HI(I)T depends on age and sex.

  4. Stress Intensity Factors of Slanted Cracks in Bi-Material Plates

    Science.gov (United States)

    Ismail, Al Emran; Azhar Kamarudin, Kamarul; Nor, Nik Hisyamudin Muhd

    2017-10-01

    In this study, the stress intensity factors (SIF) of slanted cracks in bi-material plates subjected to mode I loading is numerically solved. Based on the literature survey, tremendous amount of research works are available studying the normal cracks in both similar and dissimilar plates. However, lack of SIF behavior for slanted cracks especially when it is embedded in bi-material plates. The slanted cracks are then modelled numerically using ANSYS finite element program. Two plates of different in mechanical properties are firmly bonded obliquely and then slanted edge cracks are introduced at the lower inclined edge. Isoparametric singular element is used to model the crack tip and the SIF is determined which is based on the domain integral method. Three mechanical mismatched and four slanted angles are used to model the cracks. According to the present results, the effects of mechanical mismatch on the SIF for normal cracks are not significant. However, it is played an important role when slanted angles are introduced. It is suggested that higher SIF can be obtained when the cracks are inclined comparing with the normal cracks. Consequently, accelerating the crack growth at the interface between two distinct materials.

  5. Cellular Stress Response Gene Expression During Upper and Lower Body High Intensity Exercises.

    Science.gov (United States)

    Kochanowicz, Andrzej; Sawczyn, Stanisław; Niespodziński, Bartłomiej; Mieszkowski, Jan; Kochanowicz, Kazimierz; Żychowska, Małgorzata

    2017-01-01

    The aim was to compare the effect of upper and lower body high-intensity exercise on chosen genes expression in athletes and non-athletes. Fourteen elite male artistic gymnasts (EAG) aged 20.6 ± 3.3 years and 14 physically active men (PAM) aged 19.9 ± 1.0 years performed lower and upper body 30 s Wingate Tests. Blood samples were collected before, 5 and 30 minutes after each effort to assess gene expression via PCR. Significantly higher mechanical parameters after lower body exercise was observed in both groups, for relative power (8.7 ± 1.2 W/kg in gymnasts, 7.2 ± 1.2 W/kg in controls, p = 0.01) and mean power (6.7 ± 0.7 W/kg in gymnasts, 5.4 ± 0.8 W/kg in controls, p = 0.01). No differences in lower versus upper body gene expression were detected for all tested genes as well as between gymnasts and physical active man. For IL-6 m-RNA time-dependent effect was observed. Because of no significant differences in expression of genes associated with cellular stress response the similar adaptive effect to exercise may be obtained so by lower and upper body exercise.

  6. Analytical solution for stress, strain and plastic instability of pressurized pipes with volumetric flaws

    Energy Technology Data Exchange (ETDEWEB)

    Cunha, Sergio B., E-mail: sbcunha@petrobras.com.br [PETROBRAS/TRANSPETRO, Av. Pres. Vargas 328 - 7th floor, Rio de Janeiro, RJ 20091-060 (Brazil); Netto, Theodoro A., E-mail: tanetto@lts.coppe.ufrj.br [COPPE, Federal University ot Rio de Janeiro, Ocean Engineering Department, PO BOX 68508, Rio de Janeiro - RJ (Brazil)

    2012-01-15

    The mechanical behavior of internally pressurized pipes with volumetric flaws is analyzed. The two possible modes of circumferentially straining the pipe wall are identified and associated to hypothesized geometries. The radial deformation that takes place by bending the pipe wall is studied by means of axisymmetric flaws and the membrane strain developed by unequal hoop deformation is analyzed with the help of narrow axial flaws. Linear elastic shell solutions for stress and strain are developed, the plastic behavior is studied and the maximum hoop stress at the flaw is related to the undamaged pipe hoop stress by means of stress concentration factors. The stress concentration factors are employed to obtain equations predicting the pressure at which the pipe fails by plastic instability for both types of flaw. These analytical solutions are validated by comparison with burst tests on 3 Double-Prime diameter pipes and finite element simulations. Forty-one burst tests were carried out and two materials with very dissimilar plastic behavior, carbon steel and austenitic stainless steel, were used in the experiments. Both the analytical and the numerical predictions showed good correlation with the experimentally observed burst pressures. - Highlights: Black-Right-Pointing-Pointer An analytical model for the burst of a pipe with a volumetric flaw is developed. Black-Right-Pointing-Pointer Deformation, strain and stress are modeled in the elastic and plastic domains. Black-Right-Pointing-Pointer The model is comprehensively validated by experiments and numerical simulations. Black-Right-Pointing-Pointer The burst pressure model's accuracy is equivalent to finite element simulations.

  7. Usefulness of creep work-time relation for determining stress intensity limit of high-temperature components

    International Nuclear Information System (INIS)

    Kim, Woo Gon; Ryu, Woo Seog; Lee, Kyung Yong

    2003-01-01

    In order to determine creep stress intensity limit of high-temperature components, the usefulness of the creep work and time equation, defined as W c t p = B (where W c = σ ε is the total creep work done during creep, and p and B are constants), was investigated using the experimental data. For this purpose, the creep tests for generating 1.0% strain for commercial type 316 stainless steel were conducted with different stresses; 160 MPa, 150 MPa, 145 MPa, 140 MPa and 135 MPa at 593 .deg. C. The plots of log W c - log t showed a good linear relation up to 10 5 hr, and the results of the creep work-time relation for p, B and stress intensity values showed good agreement to those of Isochronous Stress-Strain Curves (ISSC) presented in ASME BPV NH. The relation can be simply obtained with only several short-term 1% strain data without ISSC which can be obtained by long-term creep data. Particularly, this relation is useful in estimating stress intensity limit for new and emerging class of high-temperature creeping materials

  8. Chloride stress corrosion cracking of Alloy 600 in boric acid solutions

    International Nuclear Information System (INIS)

    Berge, Ph.; Noel, D.; Gras, J.M.; Prieux, B.

    1997-10-01

    The high nickel austenitic alloys are generally considered to have good resistance to chloride stress corrosion cracking. In the standard boiling magnesium chloride solution tests, alloys with more than 40% nickel are immune. Nevertheless, more recent data show that cracking can occur in both Alloys 600 and 690 if the solution is acidified. In other low pH media, such as boric acid solution at 100 deg C, transgranular and intergranular cracking are observed in Alloy 600 in the presence of minor concentrations of sodium chloride (2g/I). In concentrated boric acid at higher temperatures (250 and 290 deg C), intergranular cracking also occurs, either when the chloride concentration is high, or at low chloride contents and high oxygen levels. The role of pH and a possible specific action of boric acid are discussed, together with the influence of electrochemical potential. (author)

  9. Influence of stress on passive behaviour of steel bars in concrete pore solution

    International Nuclear Information System (INIS)

    Feng Xingguo; Tang Yuming; Zuo Yu

    2011-01-01

    Research highlights: → The influence of load on passivity of steel in concrete pore solution is studied. → The passivity of steel in pore solution decreased as the load amplitude increased. → A micro-crack model is presented to explain passive behaviour of steel under loads. - Abstract: The influence of stress on passive behaviour of steel bars in concrete pore solution was studied with electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy. The passive ability of steel decreased as the applied load increased and higher load had much greater influence on passivation than repeated loading of small magnitude. A micro-crack model was presented to explain the damage of passive layer by loads. Lower load caused micro-cracks in the passive film which might be completely recovered after unloading. Under higher load more micro-cracks were produced in the passive film and some may penetrate the film, leading to irreversible damages.

  10. Efficient computer program EPAS-J1 for calculating stress intensity factors of three-dimensional surface cracks

    International Nuclear Information System (INIS)

    Miyazaki, Noriyuki; Watanabe, Takayuki; Yagawa, Genki.

    1982-03-01

    A finite element computer program EPAS-J1 was developed to calculate the stress intensity factors of three-dimensional cracks. In the program, the stress intensity factor is determined by the virtual crack extension method together with the distorted elements allocated along the crack front. This program also includes the connection elements based on the Lagrange multiplier concept to connect such different kinds of elements as the solid and shell elements, or the shell and beam elements. For the structure including three-dimensional surface cracks, the solid elements are employed only at the neighborhood of a surface crack, while the remainder of the structure is modeled by the shell or beam elements due to the reason that the crack singularity is very local. Computer storage and computational time can be highly reduced with the application of the above modeling technique for the calculation of the stress intensity factors of the three-dimensional surface cracks, because the three-dimensional solid elements are required only around the crack front. Several numerical analyses were performed by the EPAS-J1 program. At first, the accuracies of the connection element and the virtual crack extension method were confirmed using the simple structures. Compared with other techniques of connecting different kinds of elements such as the tying method or the method using anisotropic plate element, the present connection element is found to provide better results than the others. It is also found that the virtual crack extension method provides the accurate stress intensity factor. Furthermore, the results are also presented for the stress intensity factor analyses of cylinders with longitudinal or circumferential surface cracks using the combination of the various kinds of elements together with the connection elements. (author)

  11. High-Intensity Exercise Induced Oxidative Stress and Skeletal Muscle Damage in Postpubertal Boys and Girls: A Comparative Study.

    Science.gov (United States)

    Pal, Sangita; Chaki, Biswajit; Chattopadhyay, Sreya; Bandyopadhyay, Amit

    2018-04-01

    Pal, S, Chaki, B, Chattopadhyay, S, and Bandyopadhyay, A. High-intensity exercise induced oxidative stress and skeletal muscle damage in post-pubertal boys and girls: a comparative study. J Strength Cond Res 32(4): 1045-1052, 2018-The purpose of this study was to examine the sex variation in high-intensity exercise induced oxidative stress and muscle damage among 44 sedentary postpubertal boys and girls through estimation of postexercise release pattern of muscle damage markers like creatine kinase, lactate dehydrogenase (LDH), alanine aminotransferase (ALT), aspartate aminotransferase (AST) and oxidative stress markers like extent of lipid peroxidation (thiobarbituric acid-reactive substances) and catalase activity. Muscle damage markers like creatine kinase, LDH, ALT, and AST were measured before, immediately after, and 24 and 48 hours after high-intensity incremental treadmill running. Oxidative stress markers like thiobarbituric acid-reactive substances and catalase activity were estimated before and immediately after the exercise. Lipid peroxidation and serum catalase activity increased significantly in both groups after exercise (p exercise level at 24 and 48 hours after exercise in both the sexes, (p exercise, the pattern of postexercise release of these markers were found to be similar in both the groups. Accordingly, it has been concluded from the present investigation that high-intensity exercise induces significant oxidative stress and increases indices of skeletal muscle damage in both postpubertal girls and boys. However, postpubertal girls are relatively better protected from oxidative stress and muscle damage as compared to the boys of similar age and physical activity level. It is further evident that sex difference may not be apparent for all the biomarkers of muscle damage in this age group.

  12. Determination of Stoichiometry of Solutes in Molten Salt Solvents by Correlations of Relative Raman Band Intensities

    DEFF Research Database (Denmark)

    Boghosian, Soghomon; Berg, Rolf W.

    1999-01-01

    ); (2) Nb2O5 + nS(2)O(7)(2-) (1) --> Y2n- (1); (3) MoO3 + nS(2)O(7)(2-) (1) --> Z(2n)- (1). It is shown that the solute complex species formed in the studied reactions have, respectively, the following stoichiometries: (1) n = 2, (VO)(2)O(SO4)(4)(4-); (2) n = 3, NbO(SO4)(3)(3-); (3) n = 1, MoO(SO4)(2)(2-)....

  13. Stress corrosion cracking tests on electron beam welded carbon steel specimens in carbonate-bicarbonate solution

    International Nuclear Information System (INIS)

    Parkins, R.N.

    1985-04-01

    Stress corrosion cracking tests have been performed on tapered carbon steel test pieces containing electron beam welds with a view to defining susceptibility to such cracking in a carbonate-bicarbonate solution at 90 C and an appropriate electrode potential. The tests involved applying cyclic loads to the specimens and it is shown that the threshold stress for cracking reduces linearly with increase in the magnitude of the cyclic load component. Extrapolation of these trends to zero fluctuating stress indicates static load threshold stresses in the vicinity of the yield stress (i.e. about 300 N/mm 2 for parent plate without a weld, 400 N/mm 2 for specimens with welds on one side only and 600 N/mm 2 for specimens having welds penetrating through the thickness of the specimen). The averages of the maximum crack velocities observed were least for parent plate material and greatest for weld metal, the former being essentially intergranular in morphology and the latter mostly transgranular, with heat affected zone material being intermediate between these extremes. (author)

  14. Burnout and stress amongst interns in Irish hospitals: contributing factors and potential solutions.

    Science.gov (United States)

    Hannan, E; Breslin, N; Doherty, E; McGreal, M; Moneley, D; Offiah, G

    2018-05-01

    The transition from medical school to internship can be daunting for newly qualified doctors. High rates of stress and burnout have been reported, with negative impacts on patient care and physician wellbeing. We surveyed interns in our hospital group to evaluate rates of stress and burnout, as well as identify the causative factors and propose potential solutions to these. A hundred and one interns working in four different hospitals over a 2-year period were invited to participate in an anonymous survey. The survey collected basic demographic details and surveyed aspects of mental health using the burnout scale, Maslach Burnout Inventory (MBI) and the stress scale and 12-item General Health Questionnaire (GHQ-12). Interns were also asked to rate a variety of workplace factors on a Likert scale based on the degree of stress caused. Finally, they were surveyed on their awareness of support services available to them. Our results showed that 37% of interns met the criteria for psychological distress, high levels of emotional exhaustion, high depersonalisation and a low sense of personal accomplishment were reported in 55.4, 51.5 and 41.6%, respectively. Inadequate preparation for practice, financial worries, poor role definition and sleep deprivation were reported as significant stressors. Most were unaware of available support services and expressed interest in leaving Ireland after internship. Burnout and stress are significant problems amongst doctors in Irish hospitals. Ensuring better preparation for clinical practice and awareness of support services is vital to tackle this issue.

  15. Experimental study on stress corrosion crack propagation rate of FV520B in carbon dioxide and hydrogen sulfide solution

    Science.gov (United States)

    Qin, Ming; Li, Jianfeng; Chen, Songying; Qu, Yanpeng

    FV520B steel is a kind of precipitation hardening Martensitic stainless steel, it has high-strength, good plasticity and good corrosion resistance. Stress corrosion cracking (SCC) is one of the main corrosion failure mode for FV520B in industrial transportation of natural gas operation. For a better understanding the effect on SCC of FV520B, the improved wedge opening loading (WOL) specimens and constant displacement loading methods were employed in experimental research in carbon dioxide and hydrogen sulfide solution. The test results showed that the crack propagation rate is 1.941 × 10-7-5.748 × 10-7 mm/s, the stress intensity factor KISCC is not more than 36.83 MPa √{ m } . The rate increases with the increasing of the crack opening displacement. Under the condition of different initial loading, KISCC generally shows a decreasing tendency with the increase in H2S concentration, and the crack propagation rate showed an increasing trend substantially. For the enrichment of sulfur ion in the crack tip induced the generation of pitting corrosion, promoting the surrounding metal formed the corrosion micro batteries, the pit defects gradually extended and connected with the adjacent pit to form a small crack, leading to further propagation till cracking happened. Fracture microscopic morphology displayed typical brittle fracture phenomena, accompanying with trans-granular cracking, river shape and sector, many second cracks on the fracture surface.

  16. The Effects of Aromatherapy on Intensive Care Unit Patients’ Stress and Sleep Quality: A Nonrandomised Controlled Trial

    Directory of Open Access Journals (Sweden)

    Eun Hee Cho

    2017-01-01

    Full Text Available Background. Stress has both physiological and psychological effects and can negatively impact patients’ treatment and recovery. We examined whether the aromatherapy alleviated patients’ stress and improved their sleep quality and provided data that can be utilized in clinical settings. Methods. This was a nonrandomised controlled experimental study. Participants included lucid adult patients who were admitted to the intensive care unit and had spent more than two nights there. The experimental treatment required participants to engage in deep breathing with essential oils as part of the aromatherapy. The control group was instructed to go to sleep without receiving the lavender aroma oil. Results. The experimental group and control group showed a significant difference in perceived stress (F=60.11, p<.001, objective stress index (F=25.65, p<.001, systolic blood pressure (F=9.09, p<.001, diastolic blood pressure (F=2.47, p=.046, heart rate (F=5.71, p<.001, and sleep quality (F=109.46, p<.001. Conclusions. The results revealed that aromatherapy alleviated stress and improved sleep quality in intensive care unit patients after 2 days of the experimental treatment. These results demonstrate that aromatherapy affects stress and sleep quality, thus indicating its value in nursing interventions. This trial is registered with KCT0002344.

  17. Simultaneous analysis of residual stress and stress intensity factor in a resist after UV-nanoimprint lithography based on electron moiré fringes

    International Nuclear Information System (INIS)

    Wang, Qinghua; Kishimoto, Satoshi

    2012-01-01

    In this study, the residual stress in a resist (PAK01) film and the stress intensity factor (SIF) of an induced crack are simultaneously estimated during ultraviolet nanoimprint lithography (UV-NIL) based on electron moiré fringes. A micro grid in a triangular arrangement on the resist film fabricated by UV-NIL is directly used as the model grid. Electron moiré fringes formed by the interference between the fabricated grid and the electron scan beam are used to measure the displacement distribution around the tip of a crack induced by the residual stress in the resist. The SIF of the crack is estimated using a displacement extrapolation method. The residual strain fields and the corresponding residual stress in the resist film far from the crack are determined and analyzed. This method is effective for evaluating the grid quality fabricated by the UV-NIL technique. (paper)

  18. Expanding Continuous Quality Improvement Capacity in the Medical Intensive Care Unit: Prehealth Volunteers as a Solution.

    Science.gov (United States)

    Priest, Kelsey C; Lobingier, Hannah; McCully, Nancy; Lombard, Jackie; Hansen, Mark; Uchiyama, Makoto; Hagg, Daniel S

    2016-01-01

    Health care delivery systems are challenged to support the increasing demands for improving patient safety, satisfaction, and outcomes. Limited resources and staffing are common barriers for making significant and sustained improvements. At Oregon Health & Science University, the medical intensive care unit (MICU) leadership team faced internal capacity limitations for conducting continuous quality improvement, specifically for the implementation and evaluation of the mobility portion of an evidence-based care bundle. The MICU team successfully addressed this capacity challenge using the person power of prehealth volunteers. In the first year of the project, 52 trained volunteers executed an evidence-based mobility intervention for 305 critically ill patients, conducting more than 200 000 exercise repetitions. The volunteers contributed to real-time evaluation of the project, with the collection of approximately 26 950 process measure data points. Prehealth volunteers are an untapped resource for effectively expanding internal continuous quality improvement capacity in the MICU and beyond.

  19. Intensive skills week for military medical students increases technical proficiency, confidence, and skills to minimize negative stress.

    Science.gov (United States)

    Mueller, Genevieve; Hunt, Bonnie; Wall, Van; Rush, Robert; Molof, Alan; Schoeff, Jonathan; Wedmore, Ian; Schmid, James; Laporta, Anthony

    2012-01-01

    The effects of stress induced cortisol on learning and memory is well documented in the literature.1-3 Memory and learning are enhanced at low levels while high levels are detrimental. Repetitive training in stressful situations enables management of the stress response4 as demonstrated by the high intensity training military members undergo to prepare for tactical situations. Appropriate management of one?s stress response is critical in the medical field, as the negative effects of stress can potentially hinder life-saving procedures and treatments. This also applies to physicians-in-training as they learn and practice triage, emergency medicine, and surgical skills prior to graduation. Rocky Vista University?s Military Medicine Honor?s Track (MMHT) held a week long high-intensity emergency medicine and surgical Intensive Skills Week (ISW), facilitated by military and university physicians, to advance students? skills and maximize training using the Human Worn Partial Surgical Task Simulator (Cut Suit). The short-term goal of the ISW was to overcome negative stress responses to increase confidence, technical and non-technical knowledge, and skill in surgery and emergency medicine in an effort to improve performance as third-year medical students. The long-term goal was to enhance performance and proficiency in residency and future medical practice. The metrics for the short-term goals were the focus of this pilot study. Results show an increase in confidence and decrease in perceived stress as well as statistically significant improvements in technical and non-technical skills and surgical instrumentation knowledge throughout the week. There is a correlative benefit to physician and non-physician military personnel, especially Special Operations Forces (SOF) medical personnel, from developing and implementing similar training programs when live tissue or cadaver models are unavailable or unfeasible. 2012.

  20. The interplay of stress and mowing disturbance for the intensity and importance of plant interactions in dry calcareous grasslands.

    Science.gov (United States)

    Maalouf, Jean-Paul; Le Bagousse-Pinguet, Yoann; Marchand, Lilian; Touzard, Blaise; Michalet, Richard

    2012-09-01

    There is still debate regarding the direction and strength of plant interactions under intermediate to high levels of stress. Furthermore, little is known on how disturbance may interact with physical stress in unproductive environments, although recent theory and models have shown that this interplay may induce a collapse of plant interactions and diversity. The few studies assessing such questions have considered the intensity of biotic interactions but not their importance, although this latter concept has been shown to be very useful for understanding the role of interactions in plant communities. The objective of this study was to assess the interplay between stress and disturbance for plant interactions in dry calcareous grasslands. A field experiment was set up in the Dordogne, southern France, where the importance and intensity of biotic interactions undergone by four species were measured along a water stress gradient, and with and without mowing disturbance. The importance and intensity of interactions varied in a very similar way along treatments. Under undisturbed conditions, plant interactions switched from competition to neutral with increasing water stress for three of the four species, whereas the fourth species was not subject to any significant biotic interaction along the gradient. Responses to disturbance were more species-specific; for two species, competition disappeared with mowing in the wettest conditions, whereas for the two other species, competition switched to facilitation with mowing. Finally, there were no significant interactions for any species in the disturbed and driest conditions. At very high levels of stress, plant performances become too weak to allow either competition or facilitation and disturbance may accelerate the collapse of interactions in dry conditions. The results suggest that the importance and direction of interactions are more likely to be positively related in stressful environments.

  1. Stress corrosion cracking of X80 pipeline steel exposed to high pH solutions with different concentrations of bicarbonate

    Science.gov (United States)

    Fan, Lin; Du, Cui-wei; Liu, Zhi-yong; Li, Xiao-gang

    2013-07-01

    Susceptibilities to stress corrosion cracking (SCC) of X80 pipeline steel in high pH solutions with various concentrations of HCO{3/-} at a passive potential of -0.2 V vs. SCE were investigated by slow strain rate tensile (SSRT) test. The SCC mechanism and the effect of HCO{3/-} were discussed with the aid of electrochemical techniques. It is indicated that X80 steel shows enhanced susceptibility to SCC with the concentration of HCO{3/-} increasing from 0.15 to 1.00 mol/L, and the susceptibility can be evaluated in terms of current density at -0.2 V vs. SCE. The SCC behavior is controlled by the dissolution-based mechanism in these circumstances. Increasing the concentration of HCO{3/-} not only increases the risk of rupture of passive films but also promotes the anodic dissolution of crack tips. Besides, little susceptibility to SCC is found in dilute solution containing 0.05 mol/L HCO{3/-} for X80 steel. This can be attributed to the inhibited repassivation of passive films, manifesting as a more intensive dissolution in the non-crack tip areas than at the crack tips.

  2. Time-course changes of oxidative stress response to high-intensity discontinuous training versus moderate-intensity continuous training in masters runners.

    Directory of Open Access Journals (Sweden)

    Alessandra Vezzoli

    Full Text Available Beneficial systemic effects of regular physical exercise have been demonstrated to reduce risks of a number of age-related disorders. Antioxidant capacity adaptations are amongst these fundamental changes in response to exercise training. However, it has been claimed that acute physical exercise performed at high intensity (>60% of maximal oxygen uptake may result in oxidative stress, due to reactive oxygen species being generated excessively by enhanced oxygen consumption. The aim of this study was to evaluate the effect of high-intensity discontinuous training (HIDT, characterized by repeated variations of intensity and changes of redox potential, on oxidative damage. Twenty long-distance masters runners (age 47.8 ± 7.8 yr on the basis of the individual values of gas exchange threshold were assigned to a different 8-weeks training program: continuous moderate-intensity training (MOD, n = 10 or HIDT (n = 10. In both groups before (PRE and after (POST training we examined the following oxidative damage markers: thiobarbituric acid reactive substances (TBARS as marker of lipid peroxidation; protein carbonyls (PC as marker of protein oxidation; 8-hydroxy-2-deoxy-guanosine (8-OH-dG as a biomarker of DNA base modifications; and total antioxidant capacity (TAC as indicator of the overall antioxidant system. Training induced a significant (p<0.05 decrease in resting plasma TBARS concentration in both MOD (7.53 ± 0.30 and 6.46 ± 0.27 µM, PRE and POST respectively and HIDT (7.21 ± 0.32 and 5.85 ± 0.46 µM, PRE and POST respectively. Resting urinary 8-OH-dG levels were significantly decreased in both MOD (5.50 ± 0.66 and 4.16 ± 0.40 ng mg(-1creatinine, PRE and POST respectively and HIDT (4.52 ± 0.50 and 3.18 ± 0.34 ng mg(-1creatinine, PRE and POST respectively. Training both in MOD and HIDT did not significantly modify plasma levels of PC. Resting plasma TAC was reduced in MOD while no significant changes were observed in HIDT. In conclusion

  3. The role of aerobic fitness and exercise intensity on endurance performance in uncompensable heat stress conditions.

    Science.gov (United States)

    Périard, Julien D; Caillaud, Corinne; Thompson, Martin W

    2012-06-01

    The aim of this study was to examine the influence of aerobic fitness and exercise intensity on the development of thermal and cardiovascular strain in uncompensable heat stress conditions. In three separate trials, eight aerobically trained and eight untrained subjects cycled to exhaustion at 60% (H60%) and 75% (H75%) of maximal oxygen uptake [Formula: see text] in 40°C conditions, and for 60 min at 60% [Formula: see text] in 18°C conditions (CON). Training status had no influence on time to exhaustion between trained (61 ± 10 and 31 ± 9 min) and untrained (58 ± 12 and 26 ± 10 min) subjects (H60% and H75%, respectively). Rectal temperature at exhaustion was also not significantly different between trained (39.8 ± 0.3, 39.3 ± 0.6 and 38.2 ± 0.3°C) and untrained (39.4 ± 0.5, 38.8 ± 0.5 and 38.2 ± 0.4°C) subjects, but was different between trials (H60%, H75% and CON, respectively; P exercise was terminated on reaching the ethics approved rectal temperature limit in four trained subjects in the H60% trial and two in the H75% trial, it is speculated that increased rectal temperature may have further occurred in this cohort. Nonetheless, exhaustion occurred >96% of maximum heart rate in both cohorts and was accompanied by significant declines in stroke volume (15-26%), cardiac output (5-10%) and mean arterial pressure (9-13%) (P aerobic exercise in the heat in both trained and untrained subjects.

  4. Pain Sensitivity Mediates The Relationship between Stress and Headache Intensity in Chronic Tension-Type Headache

    OpenAIRE

    Stuart Cathcart; Navjot Bhullar; Maarten Immink; Chris Della Vedova; John Hayball

    2012-01-01

    BACKGROUND: A central model for chronic tension-type headache (CTH) posits that stress contributes to headache, in part, by aggravating existing hyperalgesia in CTH sufferers. The prediction from this model that pain sensitivity mediates the relationship between stress and headache activity has not yet been examined.OBJECTIVE: To determine whether pain sensitivity mediates the relationship between stress and prospective headache activity in CTH sufferers.METHOD: Self-reported stress, pain sen...

  5. Short-term intense exercise training reduces stress markers and alters the transcriptional response to exercise in skeletal muscle.

    Science.gov (United States)

    Hinkley, J Matthew; Konopka, Adam R; Suer, Miranda K; Harber, Matthew P

    2017-03-01

    The purpose of this investigation was to examine the influence of short-term intense endurance training on cycling performance, along with the acute and chronic signaling responses of skeletal muscle stress and stability markers. Ten recreationally active subjects (25 ± 2 yr, 79 ± 3 kg, 47 ± 2 ml·kg -1 ·min -1 ) were studied before and after a 12-day cycling protocol to examine the effects of short-term intense (70-100% V̇o 2max ) exercise training on resting and exercise-induced regulation of molecular factors related to skeletal muscle cellular stress and protein stability. Skeletal muscle biopsies were taken at rest and 3 h following a 20-km cycle time trial on days 1 and 12 to measure mRNA expression and protein content. Training improved ( P stress. The maintenance in the myocellular environment may be due to synthesis of cytoprotective markers, along with enhanced degradation of damage proteins, as training tended ( P short-term intense training enhances protein stability, creating a cellular environment capable of resistance to exercise-induced stress, which may be favorable for adaptation. Copyright © 2017 the American Physiological Society.

  6. Experimental study on stress corrosion crack propagation rate of FV520B in carbon dioxide and hydrogen sulfide solution

    Directory of Open Access Journals (Sweden)

    Ming Qin

    Full Text Available FV520B steel is a kind of precipitation hardening Martensitic stainless steel, it has high-strength, good plasticity and good corrosion resistance. Stress corrosion cracking (SCC is one of the main corrosion failure mode for FV520B in industrial transportation of natural gas operation. For a better understanding the effect on SCC of FV520B, the improved wedge opening loading (WOL specimens and constant displacement loading methods were employed in experimental research in carbon dioxide and hydrogen sulfide solution. The test results showed that the crack propagation rate is 1.941 × 10−7–5.748 × 10−7 mm/s, the stress intensity factor KISCC is not more than 36.83 MPa m. The rate increases with the increasing of the crack opening displacement. Under the condition of different initial loading, KISCC generally shows a decreasing tendency with the increase in H2S concentration, and the crack propagation rate showed an increasing trend substantially. For the enrichment of sulfur ion in the crack tip induced the generation of pitting corrosion, promoting the surrounding metal formed the corrosion micro batteries, the pit defects gradually extended and connected with the adjacent pit to form a small crack, leading to further propagation till cracking happened. Fracture microscopic morphology displayed typical brittle fracture phenomena, accompanying with trans-granular cracking, river shape and sector, many second cracks on the fracture surface. Keywords: FV520B, Wedge opening loading specimen, Stress corrosion cracking, Hydrogen sulfide

  7. Negative Affect Intensity and Hostility in Individuals with Alcohol Use Disorder with or without Post-Traumatic Stress Disorder.

    Science.gov (United States)

    Gandelman, Erin; Petrakis, Ismene; Kachadourian, Lorig; Ralevski, Elizabeth

    2018-02-20

    Negative affect intensity and hostility have both been implicated in alcohol use disorders (AUD) and post-traumatic stress disorder (PTSD) when they occur separately, but have neither been compared nor explored among those with dual diagnosis AUD and PTSD. This study is a secondary analysis designed to compare levels of negative affect intensity and hostility among those with AUD to those with dual diagnosis AUD and PTSD. Participants (n = 113) were recruited from the placebo-controlled groups of two distinct 12-week clinical trials (NCT00342563 and NCT00744055). The Short Affect Intensity Scale and Buss-Durkee Hostility Inventory were administered at weeks 0, 4, 8 and 12 to all study participants to assess negative affect intensity and hostility levels, respectively. Dual diagnosis AUD and PTSD individuals showed significantly higher levels of negative affect intensity and hostility than individuals with single diagnosis AUD. These levels remained relatively stable over the course of the study in spite of all study participants showing clinically significant improvements in AUD severity and PTSD symptomology (for those with dual diagnosis). Our results indicate that individuals with dual diagnosis AUD and PTSD have higher levels of negative affect and higher levels of hostility compared to individuals with single diagnosis AUD. In addition, these heightened levels of negative affect intensity and hostility appear to function somewhat independently of diagnosis severity and symptomology improvement. To our knowledge, this is the first study to compare negative affect intensity and hostility levels between single diagnosis AUD and dual diagnosis AUD and PTSD individuals.

  8. The Effects of Aromatherapy on Intensive Care Unit Patients' Stress and Sleep Quality: A Nonrandomised Controlled Trial

    Science.gov (United States)

    Cho, Eun Hee; Lee, Mi-Young

    2017-01-01

    Background Stress has both physiological and psychological effects and can negatively impact patients' treatment and recovery. We examined whether the aromatherapy alleviated patients' stress and improved their sleep quality and provided data that can be utilized in clinical settings. Methods This was a nonrandomised controlled experimental study. Participants included lucid adult patients who were admitted to the intensive care unit and had spent more than two nights there. The experimental treatment required participants to engage in deep breathing with essential oils as part of the aromatherapy. The control group was instructed to go to sleep without receiving the lavender aroma oil. Results The experimental group and control group showed a significant difference in perceived stress (F = 60.11, p aromatherapy alleviated stress and improved sleep quality in intensive care unit patients after 2 days of the experimental treatment. These results demonstrate that aromatherapy affects stress and sleep quality, thus indicating its value in nursing interventions. This trial is registered with KCT0002344. PMID:29375641

  9. Electrochemical studies on stress corrosion cracking of incoloy-800 in caustic solution. Part II: Precracking samples

    Directory of Open Access Journals (Sweden)

    Dinu Alice

    2006-01-01

    Full Text Available Stress corrosion cracking (SCC in a caustic medium may affect the secondary circuit tubing of a CANDU NPP cooled with river water, due to an accidental formation of a concentrated alkaline environment in the areas with restricted circulation, as a result of a leakage of cooling water from the condenser. To evaluate the susceptibility of Incoloy-800 (used to manufacture steam generator tubes for CANDU NPP to SCC, some accelerated corrosion tests were conducted in an alkaline solution (10% NaOH, pH = 13. These experiments were performed at ambient temperature and 85 °C. We used the potentiodynamic method and the potentiostatic method, simultaneously monitoring the variation of the open circuit potential during a time period (E corr/time curve. The C-ring method was used to stress the samples. In order to create stress concentrations, mechanical precracks with a depth of 100 or 250 μm were made on the outer side of the C-rings. Experimental results showed that the stressed samples were more susceptible to SCC than the unstressed samples whereas the increase in temperature and crack depth lead to an increase in SCC susceptibility. Incipient micro cracks of a depth of 30 μm were detected in the area of the highest peak of the mechanical precrack.

  10. Analytical solution to the 1D Lemaitre's isotropic damage model and plane stress projected implicit integration procedure

    DEFF Research Database (Denmark)

    Andriollo, Tito; Thorborg, Jesper; Hattel, Jesper Henri

    2016-01-01

    obtaining an integral relationship between total strain and effective stress. By means of the generalized binomial theorem, an expression in terms of infinite series is subsequently derived. The solution is found to simplify considerably existing techniques for material parameters identification based...... on optimization, as all issues associated with classical numerical solution procedures of the constitutive equations are eliminated. In addition, an implicit implementation of the plane stress projected version of Lemaitre's model is discussed, showing that the resulting algebraic system can be reduced...

  11. Effect of stress hyperglycemia and intensive rehabilitation therapy in non-diabetic hemorrhagic stroke: Korean Stroke Cohort for Functioning and Rehabilitation.

    Science.gov (United States)

    Yoon, J A; Kim, D Y; Sohn, M K; Lee, J; Lee, S-G; Lee, Y-S; Han, E Y; Joo, M C; Oh, G-J; Han, J; Lee, S W; Park, M; Chang, W H; Shin, Y-I; Kim, Y-H

    2016-11-01

    We investigated the effect of stress hyperglycemia on the functional outcomes of non-diabetic hemorrhagic stroke. In addition, we investigated the usefulness of intensive rehabilitation for improving functional outcomes in patients with stress hyperglycemia. Non-diabetic hemorrhagic stroke patients were recruited and divided into two groups: intracerebral hemorrhage (ICH) (n = 165) and subarachnoid hemorrhage (SAH) (n = 156). Each group was divided into non-diabetics with or without stress hyperglycemia. Functional assessments were performed at 7 days and 3, 6 and 12 months after stroke onset. The non-diabetic with stress hyperglycemia groups were again divided into two groups who either received or did not receive intensive rehabilitation treatment. Serial functional outcome was compared between groups. For the ICH group, patients with stress hyperglycemia had worse modified Rankin Scale, National Institutes of Health Stroke Scale, Functional Ambulatory Category and Korean Mini-Mental State Examination scores than patients without stress hyperglycemia. For the SAH group, patients with stress hyperglycemia had worse scores on all functional assessments than patients without stress hyperglycemia at all time-points. After intensive rehabilitation treatment of patients with stress hyperglycemia, the ICH group had better scores on Functional Ambulatory Category and the SAH group had better scores on all functional assessments than patients without intensive rehabilitation treatment. Stress hyperglycemia affects the long-term prognosis of non-diabetic hemorrhagic stroke patients. Among stress hyperglycemia patients, intensive rehabilitation can enhance functional improvement after stroke. © 2016 EAN.

  12. Simulation Analysis of the Mutual Influence of the Stress Intensity Factor on the Multiple Blisters Caused by Hydrogen Induced Damage

    Science.gov (United States)

    Ji, Congwei; Zhang, Shaojie; Wang, Hehui

    2018-03-01

    Hydrogen blisters are taken as the research object by using the finite element software ABAQUS. The stress intensity factors of blister cracks are numerically calculated at varying depths and different edge distances for established three-dimensional finite element models of single-blister and double-blisters, respectively. The mutual influence of the stress intensity factors of the multiple blisters is obtained. It shows that the blister crack is easier to expand when the crack is closer to inner wall of the cylinder. What’s more, the crack growth rate increases firstly and then decreases as the increasing of the distance between two blisters cracks. The investigated result is of great reference value for predicting the trend of blister crack growth.

  13. Calculation of stress intensity factors using the UNCLE finite element system and their application in fracture mechanics

    International Nuclear Information System (INIS)

    Pearce, J.H.B.

    1978-02-01

    The behaviour of crack-like defects in loaded structures is in many cases characterised by the stress intensity factor, K, which describes the spatial distribution around the crack tip. Analytical evaluation of K for generalised loading and geometry would be extremely complex. A finite element approach is described which utilises the existing UNCLE system of the UKAEA. The interpretation of the results for a fracture mechanics analysis is briefly reviewed. (author)

  14. [Depression and post-traumatic stress disorder among patients in intensive care units].

    Science.gov (United States)

    Asimakopoulou, E; Madianos, M

    2014-01-01

    Recent progress in medicine and technology has produced a significant increase in the survival rate of critically ill patients who have been treated in Intensive Care Units (ICU). Consequently, researchers have become increasingly interested in the relationship between critical illness and psychiatric consequences. The experience of critical illness has been often associated with Major Depression (MD) and Post-Traumatic Stress Disorder (PTSD). There has been no similar study in Greece. The aim of the present study was to investigate the prevalence of MD and PTSD among patients after discharge from ICU in comparison with patients who discharge from pathological or surgical department. The study was conducted on five major hospitals "ATTIKON", "THRIASSIO", "KAT", "GNA GENNIMATAS", "KORGIALENIO - BENAKIO". A standardized instrument was used especially for this study and is based on "ΜΙΝΙ: Mini International Neuropsychiatric Interview" and DSM-IV. The data collection was carried out through personal interviews with the patients. It is a cross-sectional study and also a case-control study. The sample of the research was composed of 198 patients, from whom 102 were in ICU (ICU group) and 96 were not (non-ICU group). The results of the statistical processing have shown that there is a positive and statistically significant correlation between MD-PTSD and hospitalization in ICU, and particular hospitalization in ICU increases the likelihood of developing MD by 1.94 times and PTSD by 3.48 times, compared to treatment in another part of the hospital. Furthermore, the ICU group was found to suffer more than the control group from MD (32.4% vs 19.8%) and PTSD (35,3% vs 13,5%). The investigation of sociodemographic characteristics showed that being a woman discharged from ICU is nearly five times more likely to develop MD and nearly twelve times more likely to develop PTSD compared with men. Old age in ICU acts as a protective factor from PTSD. Regarding the clinical

  15. Corrosion of metals exposed to 25% magnesium chloride solution and tensile stress: Field and laboratory studies

    Directory of Open Access Journals (Sweden)

    Xianming Shi

    2017-12-01

    Full Text Available The use of chemicals for snow and ice control operations is a common practice for improving the safety and mobility of roadways in cold climate, but brings significant concerns over their risks including the corrosive effects on transportation infrastructure and motor vehicles. The vast majority of existing studies and methods to test the deicer corrosivity have been restricted to laboratory environments and unstressed metals, which may not reliably simulate actual service conditions. As such, we report a case study in which stainless steel SS 304 (unstressed and externally tensile stressed, aluminum (Al 1100 and low carbon steel (C1010 coupons were exposed to 25% MgCl2 under field conditions for six weeks. A new corrosion test-bed was developed in Montana to accelerate the field exposure to this deicer. To further investigate the observed effect of tensile stress on the corrosion of stainless steel, SS 304 (unstressed and externally stressed coupons were exposed to 25% MgCl2 solution under the laboratory conditions. The C 1010 exhibited the highest percentage of rust area and suffered the most weight loss as a result of field exposure and MgCl2 sprays. In terms of ultimate tensile strength, the Al 1100 coupons saw the greatest reduction and the unstressed and externally stressed SS 304 coupons saw the least. The ability of MgCl2 to penetrate deep into the matrix of aluminum alloy poses great risk to such structural material. Tensile stressed SS 304 suffered more corrosion than unstressed SS 304 in both the field and laboratory conditions. Results from this case study may shed new light on the deicer corrosion issue and help develop improved field testing methods to evaluate the deicer corrosivity to metals in service.

  16. Pain-related stress in the Neonatal Intensive Care Unit and salivary cortisol reactivity to socio-emotional stress in 3-month-old very preterm infants.

    Science.gov (United States)

    Provenzi, Livio; Giusti, Lorenzo; Fumagalli, Monica; Tasca, Hilarj; Ciceri, Francesca; Menozzi, Giorgia; Mosca, Fabio; Morandi, Francesco; Borgatti, Renato; Montirosso, Rosario

    2016-10-01

    Very preterm (VPT) infants are hospitalized in the Neonatal Intensive Care Unit (NICU) and exposed to varying levels of skin-breaking procedures (pain-related stress), even in absence of severe clinical conditions. Repeated and prolonged pain exposure may alter hypothalamic-pituitary-adrenal (HPA) axis reactivity in VPT infants. During the post-discharge period, altered HPA axis reactivity has been documented in response to non-social stressors, using salivary cortisol as a biomarker. However, little is known about the effects of NICU pain-related stress on subsequent HPA axis reactivity to socio-emotional stress in infants. We examined the relationship between pain-related stress in NICU and HPA axis reactivity (i.e., salivary cortisol reactivity) to an age-appropriate socio-emotional condition in 37 healthy VPT infants compared to 53 full-term (FT) controls. The number of skin-breaking procedures was obtained across NICU stay for VPT infants. At 3 months (corrected age for prematurity), all infants participated in the maternal Face-to-Face Still-Face (FFSF) procedure, in order to assess HPA axis reactivity to socio-emotional stress (i.e., maternal unresponsiveness). VPT infants exhibited a blunted salivary cortisol reactivity, which was associated with the amount of skin-breaking procedures during NICU: greater pain-related stress predicted lower salivary cortisol reactivity, adjusting for neonatal confounders. These findings further advance our knowledge of how early exposure to pain-related stress in NICU contributes to the programming of an altered HPA axis reactivity to socio-emotional stress in 3-month-old VPT infants, even in the absence of major perinatal complications. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Delayed memory effects after intense stress in Special Forces candidates: exploring path processes between cortisol secretion and memory recall.

    Science.gov (United States)

    Taverniers, John; Taylor, Marcus K; Smeets, Tom

    2013-05-01

    The aim of this paper is twofold. First, it explores delayed effects of high endogenously evoked cortisol concentrations on visuo-spatial declarative memory. Subsequently, it applies multiple mediation (MM) analyses to reveal path processes between stress and cognitive performance in a sample of 24 male Special Forces (SF) candidates (mean age = 27.0 years, SD = 4.1). The SF candidates were randomly assigned to a control (n = 12) or an intense stress group (n = 12), and cortisol secretion for the intense stress condition was triggered by a brusque 60 min prisoner of war exercise. Stress exposure provoked robust increases in cortisol concentrations and a significant decline in immediate recall performance, measured with the Rey-Osterrieth Complex Figure (ROCF). The relative retrieval differences in regard to the ROCF persisted even after a recovery period of 24 h, as both groups showed similar levels of memory decline over 24 h. Next, the study applied a MM design that involved distribution-independent asymptotic and resampling strategies to extend traditional bivariate analyses. MM results showed that ROCF performance was mediated by increases in cortisol concentrations. Considering the studied variables, the current analysis was the first to provide statistical support for the generally accepted thesis that cortisol secretion in itself, rather than subjective strain or the experimental treatment, affects cognitive performance. The revelation of such path processes is important because it establishes process identification and may refine existing paradigms.

  18. Obesity promotes oxidative stress and exacerbates blood-brain barrier disruption after high-intensity exercise

    Directory of Open Access Journals (Sweden)

    Hee-Tae Roh

    2017-06-01

    Conclusion: Our study suggests that episodic vigorous exercise can increase oxidative stress and blood neurotrophic factor levels and induce disruption of the BBB. Moreover, high levels of neurotrophic factor in the blood after exercise in the obese group may be due to BBB disruption, and it is assumed that oxidative stress was the main cause of this BBB disruption.

  19. Prostate intensity-modulated radiotherapy planning in seven mouse clicks: Development of a class solution for cancer.

    Science.gov (United States)

    Wood, Maree; Fonseca, Amara; Sampson, David; Kovendy, Andrew; Westhuyzen, Justin; Shakespeare, Thomas; Turnbull, Kirsty

    2016-01-01

    The aim of the retrospective study was to develop a planning class solution for prostate intensity-modulated radiotherapy (IMRT) that achieved target and organs-at-risk (OAR) doses within acceptable departmental protocol criteria using the Monaco treatment planning system (Elekta-CMS Software, MO, USA). Advances in radiation therapy technology have led to a re-evaluation of work practices. Class solutions have the potential to produce highly conformal plans in a time-efficient manner. Using data from intermediate and high risk prostate cancer patients, a stepwise quality improvement model was employed. Stage 1 involved the development of a broadly based treatment template developed across 10 patients. Stage 2 involved template refinement and clinical audit ( n  = 20); Stage 3, template review ( n  = 50) and Stage 4 an assessment of a revised template against the actual treatment plan involving 72 patients. The computer algorithm that comprised the Stage 4 template met clinical treatment criteria for 82% of patients. Minor template changes were required for a further 13% of patients. Major changes were required in 4%; one patient could not be assessed. The average calculation time was 13 min and involved seven mouse clicks by the planner. Thus, the new template met treatment criteria or required only minor changes in 95% of prostate patients; this is an encouraging result suggesting improvements in planning efficiency and consistency. It is feasible to develop a class solution for prostate IMRT using a stepwise quality improvement model which delivers clinically acceptable plans in the great majority of prostate cases.

  20. Stress corrosion cracks initiation of recrystallized Zircaloy-4 in iodine-methanol solutions

    International Nuclear Information System (INIS)

    Mozzani, N.

    2013-01-01

    During the pellet-cladding interaction, Zirconium-alloy fuel claddings might fail when subjected to incidental power transient in nuclear Pressurized Water Reactors, by Iodine-induced Stress Corrosion Cracking (I-SCC). This study deals with the intergranular initiation of I-SCC cracks in fully recrystallized Zircaloy-4, in methyl alcohol solution of iodine at room temperature, with the focus on critical mechanical parameters and iodine concentration. It was carried out with an approach mixing experiments and numerical simulations. An anisotropic and viscoplastic mechanical behavior model was established and validated over a wide range of loadings. With numerous constant elongation rate tensile tests and four points bending creep tests, the existence of a threshold iodine concentration I0 close to 10 -6 g.g -1 was highlighted, necessary to the occurrence of I-SCC damage, along with a transition concentration I1 close to 2.10 -4 g.g -1 . Above I1 the mechanism changes, leading to a sped up crack initiation and a loss of sensitivity towards mechanical parameters. The importance of concentration on parameters such as crack density, crack average length and intergranular and transgranular crack velocities was evidenced. Experimental results show that plastic strain is not required for I-SCC crack initiation, if the test time is long enough in the presence of stress. Its main influence is to rush the occurrence of cracking by creating initiation sites, by way of breaking the oxide layer and building up intergranular stress. Below I1, the critical strains at initiation show a substantial strain rate sensitivity. In this domain, a threshold stress of 100 MPa was found, well below the yield stress. Thanks to the combined use of notched specimens and numerical simulations, a strong protective effect of an increasing stress bi-axiality ratio was found, both in the elastic and plastic domains. Proton-irradiated samples, up to a dose of 2 dpa, were tested in the same conditions

  1. Growth, photosynthesis and stress indicators in young rosewood plants (Aniba rosaeodora Ducke) under different light intensities

    OpenAIRE

    Gonçalves, José Francisco de Carvalho; Barreto, Denize Caranhas de Sousa; Santos Junior, Ulysses Moreira dos; Fernandes, Andreia Varmes; Sampaio, Paulo de Tarso Barbosa; Buckeridge, Marcos Silveira

    2005-01-01

    Aniba rosaeodora is an Amazonian tree species that belongs to the family Lauraceae. Due to intense exploitation for extraction of essential oils (mainly linalol), A. rosaeodora is now considered an endangered species. On the other hand, there is little information about its ecophysiology which would be useful to support future forest planting programs. Hence, the effect of different light intensities on the growth and photosynthetic characteristics of young plants of A. rosaeodora was studied...

  2. Salivary Nerve Growth Factor Response to Intense Stress: Effect of Sex and Body Mass Index

    Science.gov (United States)

    2014-01-01

    collection and to avoid the following: brushing teeth prior to collection, using salivary stimulants (e.g., gum, lemon drops), and consuming acidic or high...individual differences in stress resilience with important prevention and therapeutic implications. A better understanding of how the stress response...existing studies of sNGF, involve mild to moderate challenges encountered in daily life. While these provide an important basis for specula- tion

  3. Effects of high-intensity interval versus continuous moderate-intensity aerobic exercise on apoptosis, oxidative stress and metabolism of the infarcted myocardium in a rat model.

    Science.gov (United States)

    Lu, Kai; Wang, Li; Wang, Changying; Yang, Yuan; Hu, Dayi; Ding, Rongjing

    2015-08-01

    The optimal aerobic exercise training (AET) protocol for patients following myocardial infarction (MI) has remained under debate. The present study therefore aimed to compare the effects of continuous moderate-intensity training (CMT) and high-intensity interval training (HIT) on cardiac functional recovery, and to investigate the potential associated mechanisms in a post-MI rat model. Female Sprague Dawley rats (8-10 weeks old) undergoing MI or sham surgery were subsequently submitted to CMT or HIT, or kept sedentary for eight weeks. Prior to and following AET, echocardiographic parameters and exercise capacity of the rats were measured. Western blotting was used to evaluate the levels of apoptosis and associated signaling pathway protein expression. The concentrations of biomarkers of oxidative stress were also determined by ELISA assay. Messenger (m)RNA levels and activity of the key enzymes for glycolysis and fatty acid oxidation, as well as the rate of adenosine triphosphate (ATP) synthesis, were also measured. Compared with the MI group, exercise capacity and cardiac function were significantly improved following AET, particularly following HIT. Left ventricular ejection fraction and fraction shortening were further improved in the MI-HIT group in comparison to that of the MI-CMT group. The two forms of AET almost equally attenuated apoptosis of the post-infarction myocardium. CMT and HIT also alleviated oxidative stress by decreasing the concentration of malondialdehyde and increasing the concentration of superoxide dismutase and glutathione peroxidase (GPx). In particular, HIT induced a greater increase in the concentration of GPx than that of CMT. AET, and HIT in particular, significantly increased the levels of mRNA and the maximal activity of phosphofructokinase-1 and carnitine palmitoyl transferase-1, as well as the maximal ratio of ATP synthesis. In addition, compared with the MI group, the expression of signaling proteins PI3K, Akt, p38mapk and AMPK

  4. Plasma Hsp72 (HSPA1A) and Hsp27 (HSPB1) expression under heat stress: influence of exercise intensity.

    Science.gov (United States)

    Périard, Julien D; Ruell, Patricia; Caillaud, Corinne; Thompson, Martin W

    2012-05-01

    Extracellular heat-shock protein 72 (eHsp72) expression during exercise-heat stress is suggested to increase with the level of hyperthermia attained, independent of the rate of heat storage. This study examined the influence of exercise at various intensities to elucidate this relationship, and investigated the association between eHsp72 and eHsp27. Sixteen male subjects cycled to exhaustion at 60% and 75% of maximal oxygen uptake in hot conditions (40°C, 50% RH). Core temperature, heart rate, oxidative stress, and blood lactate and glucose levels were measured to determine the predictor variables associated with eHsp expression. At exhaustion, heart rate exceeded 96% of maximum in both conditions. Core temperature reached 39.7°C in the 60% trial (58.9 min) and 39.0°C in the 75% trial (27.2 min) (P exercise may relate to the duration (i.e., core temperature attained) and intensity (i.e., rate of increase in core temperature) of exercise. Thus, the immuno-inflammatory release of eHsp72 and eHsp27 in response to exercise in the heat may be duration and intensity dependent.

  5. Determinations of directions of the mean stress field in Sichuan-Yunnan region from a number of focal mechanism solutions

    Science.gov (United States)

    Zhong, Ji-Mao; Cheng, Wan-Zheng

    2006-07-01

    Based on the spatial orientation and slip direction of the fault plane solutions, we present the expression of corresponding mechanical axis tensor in geographic coordinate system, and then put forward a method for calculating average mechanical axis tensor and its eigenvalues, which involves solving the corresponding eigenequation. The method for deducing mean stress field from T, B, and P axes parameters of a number of focal mechanism solutions has been verified by inverting data of mean stress fields in Fuyun region and in Tangshan region with fitting method of slip direction, and both results are consistent. To study regional average stress field, we need to choose a population of focal mechanism solutions of earthquakes in the massifs where there are significant tectonic structures. According to the focal mechanism solutions of 256 moderate-strong earthquakes occurred in 13 seismic zones of Sichuan-Yunnan region, the quantitative analysis results of stress tensor in each seismic zone have been given. The algorithm of such method is simple and convenient, which makes the method for analyzing tectonic stress field with large amount of focal mechanism solution data become quantified.

  6. Stress-intensity factors for surface cracks in pipes: a computer code for evaluation by use of influence functions. Final report

    International Nuclear Information System (INIS)

    Dedhia, D.D.; Harris, D.O.

    1982-06-01

    A user-oriented computer program for the evaluation of stress intensity factors for cracks in pipes is presented. Stress intensity factors for semi-elliptical, complete circumferential and long longitudinal cracks can be obtained using this computer program. The code is based on the method of influence functions which makes it possible to treat arbitrary stresses on the plane of the crack. The stresses on the crack plane can be entered as a mathematical or tabulated function. A user's manual is included in this report. Background information is also included

  7. Electro chemical studies on stress corrosion cracking of Incoloy-800 in caustic solution, part I: As received samples

    Directory of Open Access Journals (Sweden)

    Dinu Alice

    2005-01-01

    Full Text Available Many non-volatile impurities accidentally introduced into the steam generator tend to Concentrate on its surface in restricted flow areas. In this way these impurities can lead to stress corrosion cracking (SCC on stressed tubes of the steam generator. Such impurities can be strong alkaline or acid solutions. To evaluate the effect of alkaline concentrated environments on SCC of steam generator tubes, the tests were con ducted on stressed samples of Incoloy-800 in 10% NaOH solution. To accelerate the SCC process, stressed specimens were anodically polarised in a caustic solution in an electro chemical cell. The method of stressing of Incoloy-800 tubes used in our experiments was the C-ring. Using the cathodic zone of the potentiodynamic curves it was possible to calculate the most important electrochemical parameters: the corrosion current, the corrosion rate, and the polarization resistance. We found that the value of the corrosion potential to initiate the SCC microcracks was -100 mV. The tested samples were examined using the metallographic method. The main experimental results showed that the in crease of the stress state promoted the in crease of the SCC susceptibility of Incoloy-800 samples tested under the same conditions, and that the length of the SCC-type microcracks in creased with the growth of the stress value.

  8. Impact of intensive insulin treatment on the development and consequences of oxidative stress in insulin-dependent diabetes mellitus

    Directory of Open Access Journals (Sweden)

    Kocić Radivoj

    2007-01-01

    Full Text Available Background/Aim. The aim of this study, which included patients with insulin-dependent diabetes mellitus, was to determine the influence of the application of various treatment modalities (intensive or conventional on the total plasma antioxidative capacity and lipid peroxidation intensity expressed as malondialdehyde (MDA level, catalase and xanthine oxidase activity, erythrocyte glutatione reduced concentration (GSH RBC, erythrocyte MDA level (MDA RBC, as well as susceptibility of erythrocyte to H2O2-induced oxidative stress. Methods. This study included 42 patients with insulin-dependent diabetes mellitus. In 24 of the patients intensive insulin treatment was applied using the model of short-acting insulin in each meal and medium- acting insulin before going to bed, while in 18 of the patients conventional insulin treatment was applied in two (morning and evening doses. In the examined patients no presence of diabetes mellitus complications was recorded. The control group included 20 healthy adults out of a blood doner group. The plasma and erythrocytes taken from the blood samples were analyzed immediately. Results. This investigation proved that the application of intensive insulin treatment regime significantly improves total antioxidative plasma capacity as compared to the application of conventional therapy regime. The obtained results showed that the both plasma and lipoproteines apo B MDA increased significantly more in the patients on conventional therapy than in the patients on intensive insulin therapy, most probably due to intensified xanthine oxidase activity. The level of the MDA in fresh erythrocytes did not differ significantly between the groups on intensive and conventional therapy. The level of GSH and catalase activity, however, were significantly reduced in the patients on conventional therapy due to the increased susceptibility to H2O2-induced oxidative stress . Conclusion. The presented study confirmed positive effect of

  9. Influence of overelastic loading on the stress intensity factor under thermal fatigue conditions

    International Nuclear Information System (INIS)

    Stamm, H.; Munz, D.

    1983-10-01

    Thermal shock loading often creates high thermal stresses which may exceed yield strength of the material in a surface layer. In this report the application of the linear elastic ΔK-concept in the case of cyclic thermal loading within the shakedown region is discussed. To this K-factors for an edge crack in a linear elastic - perfectly plastic plate are calculated using the weight function method and are compared with results obtained with the Finite Element Method. It is shown, that rearrangement stresses during plastic flow in the first cycle must be taken into account developing conservative approximation procedures. (orig.) [de

  10. A method of fundamental solutions in poroelasticity to model the stress field in geothermal reservoirs

    CERN Document Server

    Augustin, Matthias Albert

    2015-01-01

    This monograph focuses on the numerical methods needed in the context of developing a reliable simulation tool to promote the use of renewable energy. One very promising source of energy is the heat stored in the Earth’s crust, which is harnessed by so-called geothermal facilities. Scientists from fields like geology, geo-engineering, geophysics and especially geomathematics are called upon to help make geothermics a reliable and safe energy production method. One of the challenges they face involves modeling the mechanical stresses at work in a reservoir. The aim of this thesis is to develop a numerical solution scheme by means of which the fluid pressure and rock stresses in a geothermal reservoir can be determined prior to well drilling and during production. For this purpose, the method should (i) include poroelastic effects, (ii) provide a means of including thermoelastic effects, (iii) be inexpensive in terms of memory and computational power, and (iv) be flexible with regard to the locations of data ...

  11. Effects of water stress and light intensity on chlorophyll fluorescence parameters and pigments of Aloe vera L.

    Science.gov (United States)

    Hazrati, Saeid; Tahmasebi-Sarvestani, Zeinolabedin; Modarres-Sanavy, Seyed Ali Mohammad; Mokhtassi-Bidgoli, Ali; Nicola, Silvana

    2016-09-01

    Aloe vera L. is one of the most important medicinal plants in the world. In order to determine the effects of light intensity and water deficit stress on chlorophyll (Chl) fluorescence and pigments of A. vera, a split-plot in time experiment was laid out in a randomized complete block design with four replications in a research greenhouse. The factorial combination of three light intensities (50, 75 and 100% of sunlight) and four irrigation regimes (irrigation after depleting 20, 40, 60 and 80% of soil water content) were considered as main factors. Sampling time was considered as sub factor. The first, second and third samplings were performed 90, 180 and 270 days after imposing the treatments, respectively. The results demonstrated that the highest light intensity and the severe water stress decreased maximum fluorescence (Fm), variable fluorescence (Fv)/Fm, quantum yield of PSII photochemistry (ФPSII), Chl and photochemical quenching (qP) but increased non-photochemical quenching (NPQ), minimum fluorescence (F0) and Anthocyanin (Anth). Additionally, the highest Fm, Fv/Fm, ФPSII and qP and the lowest NPQ and F0 were observed when 50% of sunlight was blocked and irrigation was done after 40% soil water depletion. Irradiance of full sunlight and water deficit stress let to the photoinhibition of photosynthesis, as indicated by a reduced quantum yield of PSII, ФPSII, and qP, as well as higher NPQ. Thus, chlorophyll florescence measurements provide valuable physiological data. Close to half of total solar radiation and irrigation after depleting 40% of soil water content were selected as the most efficient treatments. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  12. Is Less Noise, Light and Parental/Caregiver Stress in the Neonatal Intensive Care Unit Better for Neonates?

    Science.gov (United States)

    Venkataraman, Rohini; Kamaluddeen, Majeeda; Amin, Harish; Lodha, Abhay

    2018-01-15

    In utero sensory stimuli and interaction with the environment strongly influence early phases of fetal and infant development. Extremely premature infants are subjected to noxious procedures and routine monitoring, in addition to exposure to excessive light and noise, which disturb the natural sleep cycle and induce stress. Non-invasive ventilation, measures to prevent sepsis, and human milk feeding improve short-term and long-term neurodevelopmental outcomes in premature infants. To preserve brain function, and to improve quality of life and long-term neurodevelopmental outcomes, the focus now is on the neonatal intensive care unit (NICU) environment and its impact on the infant during hospital stay. The objectives of this write-up are to understand the effects of environmental factors, including lighting and noise in the NICU, on sensory development of the infant, the need to decrease parental and caregiver stress, and to review existing literature, local policies and recommendations.

  13. Intensity of heat stress in winter wheat—phenology compensates for the adverse effect of global warming

    International Nuclear Information System (INIS)

    Rezaei, Ehsan Eyshi; Siebert, Stefan; Ewert, Frank

    2015-01-01

    Higher temperatures during the growing season are likely to reduce crop yields with implications for crop production and food security. The negative impact of heat stress has also been predicted to increase even further for cereals such as wheat under climate change. Previous empirical modeling studies have focused on the magnitude and frequency of extreme events during the growth period but did not consider the effect of higher temperature on crop phenology. Based on an extensive set of climate and phenology observations for Germany and period 1951–2009, interpolated to 1 × 1 km resolution and provided as supplementary data to this article (available at stacks.iop.org/ERL/10/024012/mmedia), we demonstrate a strong relationship between the mean temperature in spring and the day of heading (DOH) of winter wheat. We show that the cooling effect due to the 14 days earlier DOH almost fully compensates for the adverse effect of global warming on frequency and magnitude of crop heat stress. Earlier heading caused by the warmer spring period can prevent exposure to extreme heat events around anthesis, which is the most sensitive growth stage to heat stress. Consequently, the intensity of heat stress around anthesis in winter crops cultivated in Germany may not increase under climate change even if the number and duration of extreme heat waves increase. However, this does not mean that global warning would not harm crop production because of other impacts, e.g. shortening of the grain filling period. Based on the trends for the last 34 years in Germany, heat stress (stress thermal time) around anthesis would be 59% higher in year 2009 if the effect of high temperatures on accelerating wheat phenology were ignored. We conclude that climate impact assessments need to consider both the effect of high temperature on grain set at anthesis but also on crop phenology. (letter)

  14. Intensity of heat stress in winter wheat—phenology compensates for the adverse effect of global warming

    Science.gov (United States)

    Eyshi Rezaei, Ehsan; Siebert, Stefan; Ewert, Frank

    2015-02-01

    Higher temperatures during the growing season are likely to reduce crop yields with implications for crop production and food security. The negative impact of heat stress has also been predicted to increase even further for cereals such as wheat under climate change. Previous empirical modeling studies have focused on the magnitude and frequency of extreme events during the growth period but did not consider the effect of higher temperature on crop phenology. Based on an extensive set of climate and phenology observations for Germany and period 1951-2009, interpolated to 1 × 1 km resolution and provided as supplementary data to this article (available at stacks.iop.org/ERL/10/024012/mmedia), we demonstrate a strong relationship between the mean temperature in spring and the day of heading (DOH) of winter wheat. We show that the cooling effect due to the 14 days earlier DOH almost fully compensates for the adverse effect of global warming on frequency and magnitude of crop heat stress. Earlier heading caused by the warmer spring period can prevent exposure to extreme heat events around anthesis, which is the most sensitive growth stage to heat stress. Consequently, the intensity of heat stress around anthesis in winter crops cultivated in Germany may not increase under climate change even if the number and duration of extreme heat waves increase. However, this does not mean that global warning would not harm crop production because of other impacts, e.g. shortening of the grain filling period. Based on the trends for the last 34 years in Germany, heat stress (stress thermal time) around anthesis would be 59% higher in year 2009 if the effect of high temperatures on accelerating wheat phenology were ignored. We conclude that climate impact assessments need to consider both the effect of high temperature on grain set at anthesis but also on crop phenology.

  15. Temporal variance reverses the impact of high mean intensity of stress in climate change experiments.

    Science.gov (United States)

    Benedetti-Cecchi, Lisandro; Bertocci, Iacopo; Vaselli, Stefano; Maggi, Elena

    2006-10-01

    Extreme climate events produce simultaneous changes to the mean and to the variance of climatic variables over ecological time scales. While several studies have investigated how ecological systems respond to changes in mean values of climate variables, the combined effects of mean and variance are poorly understood. We examined the response of low-shore assemblages of algae and invertebrates of rocky seashores in the northwest Mediterranean to factorial manipulations of mean intensity and temporal variance of aerial exposure, a type of disturbance whose intensity and temporal patterning of occurrence are predicted to change with changing climate conditions. Effects of variance were often in the opposite direction of those elicited by changes in the mean. Increasing aerial exposure at regular intervals had negative effects both on diversity of assemblages and on percent cover of filamentous and coarsely branched algae, but greater temporal variance drastically reduced these effects. The opposite was observed for the abundance of barnacles and encrusting coralline algae, where high temporal variance of aerial exposure either reversed a positive effect of mean intensity (barnacles) or caused a negative effect that did not occur under low temporal variance (encrusting algae). These results provide the first experimental evidence that changes in mean intensity and temporal variance of climatic variables affect natural assemblages of species interactively, suggesting that high temporal variance may mitigate the ecological impacts of ongoing and predicted climate changes.

  16. Organizational Stressors and Related Stress Intensities in Tehran\\'s Comprehensive Rehabilitation Centers: From the Employees\\' Point of View

    Directory of Open Access Journals (Sweden)

    Nayyereh Tavafi

    2007-01-01

    Full Text Available Objective: Rehabilitation services employees are exposed to stressors at everyday work because they are in touch with people who disability and problems have associated with. Inappropriate policies and processes in work place aggravate stress and would adversely affect mental and physical health of this population which in turn would affect their quality of work. Materials & Methods: In order to determine the status of inappropriate organizational policies and processes as organizational stressors and related stress intensities in Tehran’s comprehensive rehabilitation centers, in a descriptive study all of the personnel were asked to fill a questionnaire which consisted of 32 questions. Content validity was approved by expertise people and reliability was 0.83. Results: Revealed that misevaluation of employees (%98 and using unclear and inappropriate criteria for evaluating personal (%95 were the most prevalent inappropriate organizational policy and process that personnel confronted with. Also we found that exposure to "inequality of payment for similar jobs" and "invalidity of criteria which were used for personnel evaluation", induced highest degree of stress on employees (2.64 from 4 & 1.71from 4 respectively. Conclusion: We conclude that as the most prevalent factor which induced stress in personnel is misevaluation, correction of personnel evaluation system should be over emphasized.

  17. Normal stress differences from Oldroyd 8-constant framework: Exact analytical solution for large-amplitude oscillatory shear flow

    Science.gov (United States)

    Saengow, C.; Giacomin, A. J.

    2017-12-01

    The Oldroyd 8-constant framework for continuum constitutive theory contains a rich diversity of popular special cases for polymeric liquids. In this paper, we use part of our exact solution for shear stress to arrive at unique exact analytical solutions for the normal stress difference responses to large-amplitude oscillatory shear (LAOS) flow. The nonlinearity of the polymeric liquids, triggered by LAOS, causes these responses at even multiples of the test frequency. We call responses at a frequency higher than twice the test frequency higher harmonics. We find the new exact analytical solutions to be compact and intrinsically beautiful. These solutions reduce to those of our previous work on the special case of the corotational Maxwell fluid. Our solutions also agree with our new truncated Goddard integral expansion for the special case of the corotational Jeffreys fluid. The limiting behaviors of these exact solutions also yield new explicit expressions. Finally, we use our exact solutions to see how η∞ affects the normal stress differences in LAOS.

  18. Infants born preterm, stress, and neurodevelopment in the neonatal intensive care unit: might music have an impact?

    Science.gov (United States)

    Anderson, Dane E; Patel, Aniruddh D

    2018-03-01

    The neonatal intensive care unit (NICU) provides life-saving medical care for an increasing number of newborn infants each year. NICU care, while lifesaving, does have attendant consequences which can include repeated activation of the stress response and reduced maternal interaction, with possible negative long-term impacts on brain development. Here we present a neuroscientific framework for considering the impact of music on neurodevelopment in the NICU of infants born preterm and evaluate current literature on the use of music with this population to determine what is most reliably known of the physiological effects of music interventions. Using online academic databases we collected relevant, experimental studies aimed at determining effects of music listening in infants in the NICU. These articles were evaluated for methodological rigor, ranking the 10 most experimentally stringent as a representative sample. The selected literature seems to indicate that effects are present on the cardio-pulmonary system and behavior of neonates, although the relative effect size remains unclear. These findings indicate a need for more standardized longitudinal studies aimed at determining not only whether NICU music exposure has beneficial effects on the cardio-pulmonary system, but also on the hypothalamic-pituitary-adrenal axis, brain structures, and cognitive behavioral status of these children as well. Provides a neuroscience framework for considering how music might attenuate stress in neonatal intensive care unit (NICU) infants. Considers how repeated stress may cause negative neurodevelopmental impacts in infants born preterm. Posits epigenetics can serve as a mechanistic pathway for music moderating the stress response. © 2018 Mac Keith Press.

  19. Effects of potential and concentration of bicarbonate solution on stress corrosion cracking of annealed carbon steel

    International Nuclear Information System (INIS)

    Haruna, Takumi; Zhu, Liehong; Murakami, Makoto; Shibata, Toshio

    2000-01-01

    Effects of potential and concentration of bicarbonate on stress corrosion cracking (SCC) of annealed SM 400 B carbon steel has been investigated in bicarbonate solutions at 343 K. The surface of annealed specimen had decarburized layer of about 0. 5 mm thickness. A potentiostatic slow strain rate testing apparatus equipped with a charge coupled device camera system was employed to evaluate SCC susceptibility from the viewpoint of the crack behavior. In a constant bicarbonate concentration of 1 M, cracks were observed in the potential range from -800 to 600 mV Ag/ A gCl . and especially, the initiation and the propagation of the cracks were accelerated at -600 mV. At a constant potential of -600 mV, cracks were observed in the concentration range from 0.001 to 1 M, and the initiation and the propagation of the cracks were suppressed as the concentration decreased. Polarization curves for the decarburized surface were measured with two different scan rates. High SCC susceptibility may be expected in the potential range where the difference between the two current densities is large. It was found in this system that the potential with the maximum difference in the current density was -600 mV for 1 M bicarbonate solution, and the potential increased with a decrease in the concentration of bicarbonate. This means that an applied potential of -600 mV provides the highest SCC susceptibility for 1 M bicarbonate solution, and that the SCC susceptibility decreases as the concentration decreases. These findings support the dependence of the actual SCC behavior on the potential and the concentration of bicarbonate. (author)

  20. Involvement of Potassium Transport Systems in the Response of Synechocystis PCC 6803 Cyanobacteria to External pH Change, High-Intensity Light Stress and Heavy Metal Stress.

    Science.gov (United States)

    Checchetto, Vanessa; Segalla, Anna; Sato, Yuki; Bergantino, Elisabetta; Szabo, Ildiko; Uozumi, Nobuyuki

    2016-04-01

    The unicellular photosynthetic cyanobacterium, able to survive in varying environments, is the only prokaryote that directly converts solar energy and CO2 into organic material and is thus relevant for primary production in many ecosystems. To maintain the intracellular and intrathylakoid ion homeostasis upon different environmental challenges, the concentration of potassium as a major intracellular cation has to be optimized by various K(+)uptake-mediated transport systems. We reveal here the specific and concerted physiological function of three K(+)transporters of the plasma and thylakoid membranes, namely of SynK (K(+)channel), KtrB (Ktr/Trk/HKT) and KdpA (Kdp) in Synechocystis sp. strain PCC 6803, under specific stress conditions. The behavior of the wild type, single, double and triple mutants was compared, revealing that only Synk contributes to heavy metal-induced stress, while only Ktr/Kdp is involved in osmotic and salt stress adaptation. With regards to pH shifts in the external medium, the Kdp/Ktr uptake systems play an important role in the adaptation to acidic pH. Ktr, by affecting the CO2 concentration mechanism via its action on the bicarbonate transporter SbtA, might also be responsible for the observed effects concerning high-light stress and calcification. In the case of illumination with high-intensity light, a synergistic action of Kdr/Ktp and SynK is required in order to avoid oxidative stress and ensure cell viability. In summary, this study dissects, using growth tests, measurement of photosynthetic activity and analysis of ultrastructure, the physiological role of three K(+)transporters in adaptation of the cyanobacteria to various environmental changes. © The Author 2016. Published by Oxford University Press on behalf of Japanese Society of Plant Physiologists. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  1. Oxidative stress and antioxidant biomarker responses after a moderate-intensity soccer training session.

    Science.gov (United States)

    Mello, Rodrigo; Mello, Ricardo; Gomes, Diego; Paz, Gabriel Andrade; Nasser, Igor; Miranda, Humberto; Salerno, Verônica P

    2017-01-01

    The present study investigated the effects of a moderate-intensity soccer training session on the production of reactive oxygen species (ROS) and the antioxidant capacity in athletes along with the biomarkers creatine kinase and transaminases for lesions in muscle and liver cells. Twenty-two male soccer players participated in this study. Blood samples were collected 5 min before and after a moderate-intensity game simulation. The results showed a decrease in the concentration of reduced glutathione (GSH) from an elevation in the production of ROS that maintained the redox homeostasis. Although the session promoted an elevated energy demand, observed by an increase in lactate and glucose levels, damage to muscle and/or liver cells was only suggested by a significant elevation in the levels of alanine transaminase (ALT). Of the two biomarkers analysed, the results suggest that measurements of the ALT levels could be adopted as a method to monitor recovery in athletes.

  2. 24-Epibrassinoslide enhances plant tolerance to stress from low temperatures and poor light intensities in tomato (Lycopersicon esculentum Mill.).

    Science.gov (United States)

    Cui, Lirong; Zou, Zhirong; Zhang, Jing; Zhao, Yanyan; Yan, Fei

    2016-01-01

    Brassinosteroids (Brs) are a newly recognized group of active steroidal hormones that occur at low concentrations in all plant parts and one of the active and stable forms is 24-epibrassinolide (EBR). We investigated the effect of EBR on tomato (Lycopersicon esculentum Mill.) and its mechanism when seedlings were exposed to low temperature and poor light stress conditions. Leaves of stress-tolerant 'Zhongza9' and stress-sensitive 'Zhongshu4' cultivars were pre-treated with spray solutions containing either 0.1 μM EBR or no EBR (control). The plants were then transferred to chambers where they were exposed to low temperatures of 12 °C/6 °C (day/night) under a low light (LL) level of 80 μmol · m(-2) · s(-1). Exogenous application of EBR significantly increased the antioxidant activity of superoxide dismutase, catalase and peroxidase, and decreased the rate of O2 · (-) formation and H2O2 and malondialdehyde contents. Additionally, the ATP synthase β subunit content was increased by exogenous hormone application. Based on these results, we conclude that exogenous EBR can elicit synergism between the antioxidant enzyme systems and the ATP synthase β subunit so that scavenging of reactive oxygen species becomes more efficient. These activities enable plants to cope better under combined low temperature and poor light stresses.

  3. A plastic stress intensity factor approach to turbine disk structural integrity assessment

    OpenAIRE

    Shlyannikov, V.; Zakharov, A.; Yarullin, R.

    2016-01-01

    This study based on a new fracture mechanics parameter is concerned with assessing the integrity of cracked steam turbine disk which operate under startup-shutdown cyclic loading conditions. Damage accumulation and growth in service have occurred on the inner surface of slot fillet of key. In order to determine elastic-plastic fracture mechanics parameters full-size stress-strain state analysis of turbine disk was performed for a quote-elliptical part-through cracks under consider...

  4. Adaptive force produced by stress-induced regulation of random variation intensity.

    Science.gov (United States)

    Shimansky, Yury P

    2010-08-01

    The Darwinian theory of life evolution is capable of explaining the majority of related phenomena. At the same time, the mechanisms of optimizing traits beneficial to a population as a whole but not directly to an individual remain largely unclear. There are also significant problems with explaining the phenomenon of punctuated equilibrium. From another perspective, multiple mechanisms for the regulation of the rate of genetic mutations according to the environmental stress have been discovered, but their precise functional role is not well understood yet. Here a novel mathematical paradigm called a Kinetic-Force Principle (KFP), which can serve as a general basis for biologically plausible optimization methods, is introduced and its rigorous derivation is provided. Based on this principle, it is shown that, if the rate of random changes in a biological system is proportional, even only roughly, to the amount of environmental stress, a virtual force is created, acting in the direction of stress relief. It is demonstrated that KFP can provide important insights into solving the above problems. Evidence is presented in support of a hypothesis that the nature employs KFP for accelerating adaptation in biological systems. A detailed comparison between KFP and the principle of variation and natural selection is presented and their complementarity is revealed. It is concluded that KFP is not a competing alternative, but a powerful addition to the principle of variation and natural selection. It is also shown KFP can be used in multiple ways for adaptation of individual biological organisms.

  5. Global Metabolic Stress of Isoeffort Continuous and High Intensity Interval Aerobic Exercise: A Comparative 1H NMR Metabonomic Study.

    Science.gov (United States)

    Zafeiridis, Andreas; Chatziioannou, Anastasia Chrysovalantou; Sarivasiliou, Haralambos; Kyparos, Antonios; Nikolaidis, Michalis G; Vrabas, Ioannis S; Pechlivanis, Alexandros; Zoumpoulakis, Panagiotis; Baskakis, Constantinos; Dipla, Konstantina; Theodoridis, Georgios A

    2016-12-02

    The overall metabolic/energetic stress that occurs during an acute bout of exercise is proposed to be the main driving force for long-term training adaptations. Continuous and high-intensity interval exercise protocols (HIIE) are currently prescribed to acquire the muscular and metabolic benefits of aerobic training. We applied 1 H NMR-based metabonomics to compare the overall metabolic perturbation and activation of individual bioenergetic pathways of three popular aerobic exercises matched for effort/strain. Nine men performed continuous, long-interval (3 min), and short-interval (30 s) bouts of exercise under isoeffort conditions. Blood was collected before and after exercise. The multivariate PCA and OPLS-DA models showed a distinct separation of pre- and postexercise samples in three protocols. The two models did not discriminate the postexercise overall metabolic profiles of the three exercise types. Analysis focused on muscle bioenergetic pathways revealed an extensive upregulation of carbohydrate-lipid metabolism and the TCA cycle in all three protocols; there were only a few differences among protocols in the postexercise abundance of molecules when long-interval bouts were performed. In conclusion, continuous and HIIE exercise protocols, when performed with similar effort/strain, induce comparable global metabolic response/stress despite their marked differences in work-bout intensities. This study highlights the importance of NMR metabonomics in comprehensive monitoring of metabolic consequences of exercise training in the blood of athletes and exercising individuals.

  6. Stress Intensity Factors for Cracked Metallic Structures Under Rapid Thermal Loading

    Science.gov (United States)

    1987-10-01

    solution algorithm was developed based on the influence function method, and numerical results were generated to show the variation of K with flaw size and...numerical algorithms developed can be executed on a desktop microcomputer illustrating the efficient and powerful characteristic of the influence function method... Function Method 3-6 Superposition and Crack Face Loading Equivalence 3-7 Influence Function Generation 3-10 Influence Functions For Two Cracked Body

  7. Stress corrosion cracking of nickel alloys in bicarbonate and chloride solutions

    International Nuclear Information System (INIS)

    Ares, A. E.; Carranza, R. M.; Giordano, C. M.; Zadorozne, N. S.; Rebak, R.B.

    2013-01-01

    Alloy 22 is one of the candidates for the manufacture of high level radioactive waste containers. These containers provide services in natural environments characterized by multi-ionics solutions, it is estimated they could suffer three types of deterioration: general corrosion, localized corrosion (crevice corrosion) and stress corrosion cracking (SCC). It has been confirmed that the presence of bicarbonate at temperatures above 60°C and applied potentials around +400 mVSCE are necessary in order to produce cracking, . This susceptibility may be associated to the instability of the passive film formed and to the formation of an anodic current peak in the polarization curves in these media. Until now, it is unclear the role played by each alloying element (Ni, Cr or Mo) in the SCC susceptibility of Alloy 22 in these media The aim of this work is to evaluate the SCC susceptibility of nickel-based alloys in media containing bicarbonate and chloride ions, at high temperature. Slow Strain Rate Testing (SSRT) was conducted to samples of different alloys: 22 (Ni-Cr-Mo), 600 (Ni-Cr-Fe), 800H (Ni-Fe-Cr) y 201 (99.5% Ni).This tests were conducted in 1.1 mol/L NaHCO 3 +1.5 mol/L NaCl a 90°C and different applied potentials (+200mVSCE,+300 mVSCE, +400 mVSCE). These results were complemented with those obtained in a previous work, where we studied the anodic electrochemical behavior of nickel base alloys under the same conditions. It was found that alloy 22 showed a current peak in a potential range between +200 mVSCE and +300 mVSCE when immersed in bicarbonate ions containing solutions. This peak was attributed to the presence of chromium in the alloys. The SSRT showed that only alloy 22 has a clear indication of stress corrosion cracking. The current results suggested that the presence of an anodic peak in the polarization curves was not a sufficient condition for cracking. (author)

  8. Stress intensity factor analysis of friction sliding at discontinuity interfaces and junctions

    CSIR Research Space (South Africa)

    Phan, AV

    2003-12-01

    Full Text Available ]) and boundary element method (BEM) [2?5]. The key feature of the integral equation approach is that only the boundary of the domain is discretized and only boundary quantities are determined. As a result, for fracture analy- sis, the singular stress field ahead... collocation ap- proach enforces the BIE (1) and HBIE (2) at discrete source points whereas these equations are satisfied in an averaged sense with the Galerkin approximation. The additional boundary integration is the key to obtaining a symmetric coefficient...

  9. High-intensity stress elicits robust cortisol increases, and impairs working memory and visuo-spatial declarative memory in Special Forces candidates: A field experiment.

    Science.gov (United States)

    Taverniers, John; Van Ruysseveldt, Joris; Smeets, Tom; von Grumbkow, Jasper

    2010-07-01

    While running a selection procedure, 27 male Belgian Special Forces candidates, with a mean age of 27.4 years (SD = 5.1), were randomly assigned to a no-stress control (n = 14) or a high-intensity stress group (n = 13). Participants in the latter group were exposed to an extremely strenuous mock prisoner of war (POW) exercise. Immediately after stress or control treatment, working memory and visuo-spatial declarative memory performances were measured by the digit span (DS) test and the Rey-Osterrieth complex figure (ROCF), respectively. Concurrently, stress levels were assessed by obtaining salivary cortisol measurements and subjectively by the NASA Task Load Index (TLX). As expected, exposure to high-intensity stress led to both robust cortisol increases and significant differences in TLX scores. Stress induction also significantly impaired DS and ROCF performances. Moreover, delta cortisol increases and ROCF performance in the POW stress group showed a significant negative correlation, while DS performances followed the same tendency. Summarizing, the current findings complement and extend previous work on hormonal stress effects, and the subsequent performance deterioration on two memory tests in a unique high-intensity stress environment.

  10. Massage therapy in cortisol circadian rhythm, pain intensity, perceived stress index and quality of life of fibromyalgia syndrome patients.

    Science.gov (United States)

    de Oliveira, Felipe Rodrigues; Visnardi Gonçalves, Laura Cristina; Borghi, Filipy; da Silva, Larissa Gabriela Rocha Ventura; Gomes, Anne Elise; Trevisan, Gustavo; Luiz de Souza, Aglécio; Grassi-Kassisse, Dora Maria; de Oliveira Crege, Danilo Roberto Xavier

    2018-02-01

    We investigate the effects of a massage therapy program (MTP) in cortisol concentration (CC), intensity of pain, quality of life and perceived stress index of fibromyalgia patients. Volunteers (n = 24, aged 26-55 years) were treated with MT, twice a week for three months. They answered the Fibromyalgia Impact Questionnaire (FIQ), Perceived Stress Questionnaire (PSQ) and McGill Pain Questionnaire (MPQ-Br), and collected saliva to evaluate CC before and after the end of each month. The MT had improvement in quality of life, according to the FIQ results, and promoted reduction in PSQ values after the second (PSQ2-0.62 ± 0.04vsPSQ0-0.71 ± 0.04) and third month (PSQ3-0.64 ± 0.04vsPSQ0-0.71 ± 0.04). The MTP also promoted reduction in pain after the third month (MQP-Br1-44.50 ± 2.15vsMQP-Br4-35.38 ± 3.71). Despite PSQ reduction, the CC were not affected by the program. This pilot suggests that this treatment improved quality of life, reduced perceived stress index and pain in these volunteers. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Green's functions for stress-intensity-factors for through cracks emanating from holes

    International Nuclear Information System (INIS)

    Bhandari, S.; Dubeaux, P.

    1981-01-01

    We conducted a parametric study of cracks at various elliptical openings in plates. We used five values of ellipticity and ten values of crack lengths at the edge of these holes. The computer program used is based on the Boundary Integral Equation method which requires only the contour of the structure to be segmented. The results concerning the stress distribution in the uncracked structure were verified for the cases where analytical results were available. Moreover the values of the S.I.F. for certain cases were checked through the use of some of the methods available in the literature. The final aim of this parametric study is to come up with simple Green's functions for cracks at holes. This has been possible through: (a) The use of the stress distribution in the uncracked structure (b) The Green's function for a crack in an infinite medium and (c) The principles underlying the Schwarz alternating technique used in the potential theory to resolve problems of finite regions. Finally the procedure is applied to treat a practical case of cracks as fastner holes. (orig.)

  12. Stress corrosion cracking of steam generator tubing materials in lead containing solution

    International Nuclear Information System (INIS)

    Kim, H.P.; Hwang, S.S.; Kim, J.S.; Hong, J.H.

    2007-01-01

    Stress corrosion cracking (SCC) in lead (Pb) containing environments has been one of key issues in the nuclear power industry since Pb had been identified as a cause of the SCC of steam generator (SG) tubing materials in some power plants. To mitigate or prevent degradation of SG tubing materials, a mechanistic understanding of SCC in Pb containing environment is needed, along with an understanding of the source and transport behaviors of Pb species in the secondary circuit. In this work, SCC behaviors of Alloy 600 in Pb containing environments were studied. Influences of microstructures of Alloy 600 and the inhibitive additives were investigated using the C-ring and the slow strain rate tests in caustic solution and demineralized water at 315 o C. Microstructures of Alloy 600 were varied by heat treatment at different temperatures. The additives examined were nickel boride (NiB) and cerium boride (CeB 6 ). The surface films were analyzed using Auger Electron Spectroscopy (AES) and Energy Dispersive X-ray Spectroscopy (EDS). The SCC mode varied with microstructure. Effectiveness of the additives in Pb containing environments is discussed. (author)

  13. Membrane damage and solute leakage from germinating pea seed under cadmium stress

    Energy Technology Data Exchange (ETDEWEB)

    Rahoui, Sondes, E-mail: rahoui.sondes@yahoo.fr [Bio-Physiologie Cellulaires, Departement des Sciences de la Vie, Faculte des Sciences de Bizerte, 7021 Zarzouna (Tunisia); Chaoui, Abdelilah, E-mail: cabdelilah1@yahoo.fr [Bio-Physiologie Cellulaires, Departement des Sciences de la Vie, Faculte des Sciences de Bizerte, 7021 Zarzouna (Tunisia); El Ferjani, Ezzeddine, E-mail: ezzferjani2002@yahoo.fr [Bio-Physiologie Cellulaires, Departement des Sciences de la Vie, Faculte des Sciences de Bizerte, 7021 Zarzouna (Tunisia)

    2010-06-15

    Seed germination represents a limiting stage of plant life cycle under heavy metal stress situation. Delay in germination can be associated with disorders in the event chain of germinative metabolism which is a highly complex multistage process, but one of underlying metabolic activities following imbibition of seed is the storage mobilization. The influence of cadmium on carbohydrates and aminoacids export from cotyledon to embryonic axis during germination of pea seed was investigated. Compared to the control, Cd caused a restriction in reserve mobilization as evidenced by the pronounced increase in cotyledon/embryo ratios of total soluble sugars, glucose, fructose and aminoacids. Moreover, the nutrient concentrations, as well as the electrical conductivity of germination medium were determined to quantify the extent of solute leakage. Such nutrients were lost into the imbibition medium at the expense of suitable mobilization to the growing embryonic axis. This was concomitant with an over-accumulation of lipid peroxidation products in Cd-poisoned embryonic tissues. However, the impairment of membrane integrity cannot be due to a stimulation in lipoxygenase activity, since the later was markedly inhibited after Cd exposure.

  14. Membrane damage and solute leakage from germinating pea seed under cadmium stress

    International Nuclear Information System (INIS)

    Rahoui, Sondes; Chaoui, Abdelilah; El Ferjani, Ezzeddine

    2010-01-01

    Seed germination represents a limiting stage of plant life cycle under heavy metal stress situation. Delay in germination can be associated with disorders in the event chain of germinative metabolism which is a highly complex multistage process, but one of underlying metabolic activities following imbibition of seed is the storage mobilization. The influence of cadmium on carbohydrates and aminoacids export from cotyledon to embryonic axis during germination of pea seed was investigated. Compared to the control, Cd caused a restriction in reserve mobilization as evidenced by the pronounced increase in cotyledon/embryo ratios of total soluble sugars, glucose, fructose and aminoacids. Moreover, the nutrient concentrations, as well as the electrical conductivity of germination medium were determined to quantify the extent of solute leakage. Such nutrients were lost into the imbibition medium at the expense of suitable mobilization to the growing embryonic axis. This was concomitant with an over-accumulation of lipid peroxidation products in Cd-poisoned embryonic tissues. However, the impairment of membrane integrity cannot be due to a stimulation in lipoxygenase activity, since the later was markedly inhibited after Cd exposure.

  15. Risk-associated health disorders occuring in junior schoolchildren who attend schools with higher stress and intensity of educational process

    Directory of Open Access Journals (Sweden)

    N.V. Zaitseva

    2017-03-01

    Full Text Available We performed comparative sanitary-hygienic assessment of regime, stress and intensity of educational process in different educational establishments, a comprehensive secondary school and an innovative educational establishment - lyceum. We detected that studying regime tended to be tight, classes were longer and more intense than in an ordinary school, and educational process involved considerable intellectual, sensory and emotional loads for children; such loads reached "1st category intense" level. Schoolchildren attending lyceums are also busy with additional educational programs and it significantly increases length of total educational load on them. By the end of a school year 20% of lyceum pupils suffer from sympathoadrenal system overstress and it doesn't only determine emotional tonus level in children but also leads to disorders in concentration and decision-making speed, lower reading speed and articulation, slower motor reactions. 15% of lyceum pupils have higher activity of autonomous nervous system and lower adaptation of cardiovascular system to psycho emotional and physical loads. Lyceum pupils also run 2.5 times higher risk of chronic nervous system diseases evolvement than school children attending ordinary schools. Autonomous nervous system disorders, posture disorders and nutrition disorders are predominant nosologic pathology forms in lyceum pupils as they occur in them 1.6-2.9 times more frequent than in schoolchildren of the same age who attend an ordinary comprehensive school. We detected direct correlation between higher intellectual and emotional components of educational process, and total educational intensity as well, and frequency of autonomous system disorders and musculoskeletal system diseases in pupils.

  16. Effect of plant-derived smoke solutions on physiological and biochemical attributes of maize (Zea mays L.) under salt stress

    International Nuclear Information System (INIS)

    Waheed, M.A.; Shakir, S.K.; Rehman, S.U.; Khan, M.D.

    2016-01-01

    Among abiotic stresses, salinity is an important factor reducing crop yield. Plant-derived smoke solutions have been used as growth promoters since last two decades. The present study was conducted to investigate the effect of Cymbopogon jwaracusa smoke extracts (1:100 and 1:400) on physiological and biochemical aspects of maize (Zea mays L.) under salt stress (100, 150, 200 and 250 mM). Results showed that seed germination percentage was improved up to 93% with smoke as compared to control (70%), while seedling vigor in term of root and shoot fresh weights and dry weights were also significantly increased in seeds primed with smoke extracts. Similarly, in case of alleviating solutions, there occurred a significant alleviation in the adverse effects of salt solutions when mixed smoke in all studied end points. Application of smoke solution has also increased the level of K+ and Ca+2 while reduced the level of Na+ content in maize. In addition, the levels of photosynthetic pigments, total nitrogen and protein contents were also alleviated with the application of smoke as compared to salt. There occurred an increase in the activities of Anti-oxidant in response of salt stress but overcome with the smoke application. It can be concluded that plant-derived smoke solution has the potential to alleviate the phytotoxic effects of saline condition and can increased the productivity in plants. (author)

  17. Low-Intensity Pulsed Ultrasound Prevents the Oxidative Stress Induced Endothelial-Mesenchymal Transition in Human Aortic Endothelial Cells

    Directory of Open Access Journals (Sweden)

    Jiamin Li

    2018-02-01

    Full Text Available Background/Aims: Endothelial-mesenchymal transition (EndMT has been shown to take part in the generation and progression of diverse diseases, involving a series of changes leading to a loss of their endothelial characteristics and an acquirement of properties typical of mesenchymal cells. Low-intensity pulsed ultrasound (LIPUS is a new therapeutic option that has been successfully used in fracture healing. However, whether LIPUS can inhibit oxidative stress-induced endothelial cell damages through inhibiting EndMT remained unknown. This study aimed to investigate the protective effects of LIPUS against oxidative stress-induced endothelial cell damages and the underlying mechanisms. Methods: EndMT was induced by H2O2 (100 µm for seven days. Human aortic endothelial cells (HAECs were exposed to H2O2 with or without LIPUS treatment for seven days. The expression of EndMT markers (CD31, VE-cadherin, FSP1 and α-SMA were analyzed. The levels of total and phosphorylated PI3K and AKT proteins were detected by Western Blot analysis. Cell chemotaxis was determined by wound healing and transwell assay. Results: LIPUS relieved EndMT by decreasing ROS accumulation and increasing activation of the PI3K signaling cascade. LIPUS alleviated the migration of EndMT-derived mesenchymal-like cells through reducing extracellular matrix (ECM deposition that is associated with matrix metallopeptidase (MMP proteolytic activity and collagen production. Conclusion: LIPUS produces cytoprotective effects against oxidative injuries to endothelial cells through suppressing the oxidative stress-induced EndMT, activating the PI3K/AKT pathway under oxidative stress, and limiting cell migration and excessive ECM deposition.

  18. Mesh construction and evaluation of the stress intensity factor for the semi-elliptical surface cracks

    International Nuclear Information System (INIS)

    Kim, Jong Wook; Lee, Gyu Mahn; Jeong, Kyeong Hoon; Kim, Tae Wan; Park, Keun Bae

    2001-01-01

    As actual cracks found in practical structures are mostly three-dimensional surface cracks, such cracks give rise to the important problem when the structural integrity is evaluated in a viewpoint of fracture mechanics. The case of a semi-elliptical surface crack is more complicated than that of the embedded elliptical crack since the crack front intersects the free surface. Therefore, the exact expression of stress field according to the boundary condition can be the prior process for the structural integrity evaluation . The commercial code, I-DEAS does not provide the family of strain singular element for the cracked-body analysis. This means that the user cannot make use of the pre-processing function of I-DEAS effectively. But I-DEAS has the capability to hold input data in common with computational fracture mechanics program like ABAQUS. Hence, user can construct the optimized analysis method for the generation of input data of program like ABAQUS using the I-DEAS. In the present study, a procedure for the generation of input data for the optimized 3-dimensional computational fracture mechanics is developed as a series of effort to establish the structural integriyt evaluation procedure of SMART reactor vessel assembly. Input data for the finite element analysis are made using the commercial code, I-DEAS program, The stress analysis is performed using the ABAQUS. To demonstrate the validation of the developed procedure in the present sutdy, semi-elliptic surface crack in a half space subjected to uniform tension are solved, and the effects of crack configuration ratio are discussed in detail. The numerical results are presented and compared to those presented by Raju and Newman. Also, we have established the structural integrity evaluation procedure through the 3-D crack modeling

  19. Influence of laboratory annealing on tensile properties and design stress intensity limits for Type 304 stainless steel

    International Nuclear Information System (INIS)

    Sikka, V.K.; Booker, M.K.

    1977-01-01

    The influence of reannealing (laboratory annealing) on yield and ultimate tensile strength values of 19 heats of type 304 stainless steel was determined. Most heats were reannealed at 1065 0 C for 0.5 hr. The reannealed properties were used to determine the influence of reannealing on time-independent design stress intensity limits (S/sub m/). The major findings are as follows: 1. Reannealing lowered the 0.2 percent yield strength versus temperature curve by approximately 42 MPa over the range from room temperature to 649 0 C. 2. The estimated S/sub m/ values for reannealed material were 24 to 28 MPa lower than the current code values. 3. Reannealing appears to influence the S/sub m/ value sufficiently to warrant the consideration of separate values of S/sub m/ in Sect. III of the Boiler and Pressure Vessel Code and Code Case 1592 for ''as-received'' and reannealed material

  20. Effect of Lower and Upper Body High Intensity Training on Genes Associated with Cellular Stress Response.

    Science.gov (United States)

    Żychowska, Małgorzata; Kochanowicz, Andrzej; Kochanowicz, Kazimierz; Mieszkowski, Jan; Niespodziński, Bartłomiej; Sawczyn, Stanisław

    2017-01-01

    This study aimed to compare the effect of upper and lower body high intensity exercise (HIE) on select gene expression in athletes. Fourteen elite male artistic gymnasts (age 20.9 ± 2.6 years; weight 68.6 ± 7.2 kg; fat free mass 63.6 ± 6.7 kg; height 1.70 ± 0.04 m) performed lower and upper body 30 s Wingate Tests (WAnTs) before and after eight weeks of specific HIIT. Two milliliters of blood was collected before and after (5, 30 min, resp.) lower and upper body WAnTs, and select gene expression was determined by PCR. Eight weeks of HIIT caused a significant increase in maximal power (722 to 751 Wat), relative peak power in the lower body WAnTs (10.1 to 11 W/kg), mean power (444 to 464 W), and relative mean power (6.5 to 6.8 W/kg). No significant differences in lower versus upper body gene expression were detected after HIIT, and a significant decrease in the IL6/IL10 ratio was observed after lower (-2 ∧ 0.57 p = 0.0019) and upper (-2 ∧ 0.5 p = 0.03) WAnTs following eight weeks of HIIT. It is hypothesized that a similar adaptive response to exercise may be obtained by lower and upper body exercise.

  1. Low-intensity laser irradiation at 660 nm stimulates cytochrome c oxidase in stressed fibroblast cells.

    Science.gov (United States)

    Houreld, Nicolette N; Masha, Roland T; Abrahamse, Heidi

    2012-07-01

    Low-intensity laser irradiation (LILI) has been used to modulate a variety of biological processes, including diabetic wound healing. The mechanism of action is thought to exist primarily with the mitochondria. This study aimed to determine the effect of irradiation on normal, diabetic, and ischemic mitochondrial electron transport chain (ETC) complexes. Normal, diabetic and ischemic human skin fibroblast mitochondria were irradiated in vitro at a wavelength of 660 nm and a fluence of either 5 or 15 J/cm(2). Non-irradiated mitochondria served as controls. Enzyme activities of mitochondrial complexes I, II, III, and IV were determined immediately post-irradiation. Normal, diabetic, and ischemic cells were irradiated and adenosine triphosphate (ATP) and active mitochondria were determined by luminescence and fluorescent microscopy, respectively. Irradiated diabetic mitochondria at a fluence of 15 J/cm(2) showed a significant decrease in complex III activity (P < 0.05). Normal (P < 0.01) and diabetic (P < 0.05) mitochondria irradiated at either 5 or 15 J/cm(2) showed a significant increase in complex IV activity. ATP results showed a significant increase in irradiated normal cells (5 J/cm(2); P < 0.05) and diabetic cells (15 J/cm(2); P < 0.01). There was a higher accumulation of active mitochondria in irradiated cells than non-irradiated cells. Irradiation at 660 nm has the ability to influence mitochondrial enzyme activity, in particular cytochrome c oxidase. This leads to increased mitochondrial activity and ATP synthesis. Copyright © 2012 Wiley Periodicals, Inc.

  2. Effect of Lower and Upper Body High Intensity Training on Genes Associated with Cellular Stress Response

    Directory of Open Access Journals (Sweden)

    Małgorzata Żychowska

    2017-01-01

    Full Text Available This study aimed to compare the effect of upper and lower body high intensity exercise (HIE on select gene expression in athletes. Fourteen elite male artistic gymnasts (age 20.9±2.6 years; weight 68.6±7.2 kg; fat free mass 63.6±6.7 kg; height 1.70±0.04 m performed lower and upper body 30 s Wingate Tests (WAnTs before and after eight weeks of specific HIIT. Two milliliters of blood was collected before and after (5, 30 min, resp. lower and upper body WAnTs, and select gene expression was determined by PCR. Eight weeks of HIIT caused a significant increase in maximal power (722 to 751 Wat, relative peak power in the lower body WAnTs (10.1 to 11 W/kg, mean power (444 to 464 W, and relative mean power (6.5 to 6.8 W/kg. No significant differences in lower versus upper body gene expression were detected after HIIT, and a significant decrease in the IL6/IL10 ratio was observed after lower (−2∧0.57 p=0.0019 and upper (−2∧0.5 p=0.03 WAnTs following eight weeks of HIIT. It is hypothesized that a similar adaptive response to exercise may be obtained by lower and upper body exercise.

  3. Computation of stress intensity factors for nozzle corner cracks by various finite element procedures

    International Nuclear Information System (INIS)

    Broekhoven, M.J.G.

    1975-01-01

    The present study aims at deriving accurate K-factors for a series of 5 elliptical nozzle corner cracks of increasing size by various finite element procedures, using a three-level recursive substructuring scheme to perform the computations in an economic way on an intermediate size computer (IBM 360/65 system). A nozzle on a flat plate has been selected for subsequent experimental verification, this configuration being considered an adequate simulation of a nozzle on a shallow shell. The computations have been performed with the ASKA finite element system using mainly HEXEC-27 (incomplete quartic) elements. The geometry has been subdivided into 5 subnets with a total of 3515 nodal points and 6250 unknowns, two main nets and one hyper net. Each crack front is described by 11 nodal points and all crack front nodes are inserted in the hyper net, which allows for the realization of the successive crack geometries by changing only a relatively small hyper net (615 to 725 unknowns). Output data have been interpreted in terms of K-factors by the global energy method, the displacement method and the stress method. Besides, a stiffness derivative procedure, recently developed at Brown University, which takes full advantage of the finite element formulation to calculate local K-factors, has been applied. Finally it has been investigated whether sufficiently accurate results can be obtained by analyzing a considerably smaller part than one half of the geometry (as strictly required by symmetry considerations), using fixed boundary conditions derived from a far cheaper analysis of the uncracked structure

  4. ``Living polymers'' in organic solvents : stress relaxation in bicopper tetracarboxylate/tert-butyl cyclohexane solutions

    Science.gov (United States)

    Terech, P.; Maldivi, P.; Dammer, C.

    1994-10-01

    Viscoelastic solutions of a bicopper tetracarboxylate complex in tert-butylcyclohexane have been studied by dynamic rheology in a wide range of concentrations (0.5-1.5 % volume fraction). The zero shear viscosity, the elastic modulus, the terminal stress relaxation time and the height of the high-frequency dip, in a Cole-Cole representation of the complex elastic modulus, follow scaling laws. The related exponents are discussed in the context of the physics of “living polymers” : a term used to describe worm-like species undergoing scission/recombination reactions competing mainly with the reptation motions of the chains. The current system, made up of molecular threads (17.5 Å diameter) of Cu2(O2C-CH(C2H5)C4H9)4 in the apolar solvent, is representative of a “living polymer” where, instead of mechanisms involving transient star polymeric crosslinks, a reversible scission mechanism prevails. The dynamics in the high-frequency range evolves from a regime where reptation is the dominant relaxation mechanism to a cross-over regime where “breathing” fluctuations and Rouse motions become important. Large modifications of the stress relaxation function occur for more concentrated systems. The binary system is the first example of a “living polymer” in an organic solvent and exhibits elastic moduli (G ≈ ca. 120 Pa à φ = 1 %) which are at least 20 times larger than those found for the aqueous “living polymer” systems. Les solutions viscoélastiques d'un tétracarboxylate binucléaire de cuivre dans le tert-butylcyclohexane sont étudiées par rhéologie en mode dynamique dans une gamme étendue de concentrations (0,5 %-15,5 %). La viscosité à gradient nul, le module élastique, le temps terminal de relaxation et la hauteur du puits à haute fréquence, dans une représentation Cole-Cole du module élastique complexe, suivent des lois d'échelles. Les exposants correspondants sont discutés dans le contexte de la physique des “polymères vivants

  5. Posttraumatic stress disorder (PTSD in children after paediatric intensive care treatment compared to children who survived a major fire disaster

    Directory of Open Access Journals (Sweden)

    Last Bob F

    2008-05-01

    Full Text Available Abstract Background The goals were to determine the presence of posttraumatic stress disorder (PTSD in children after paediatric intensive care treatment, to identify risk factors for PTSD, and to compare this data with data from a major fire disaster in the Netherlands. Methods Children completed the Dutch Children's Responses to Trauma Inventory at three and nine months after discharge from the paediatric intensive care unit (PICU. Comparison data were available from 355 children survivors who completed the same questionnaire 10 months after a major fire disaster. Results Thirty-six children aged eight to 17 years completed questionnaires at three month follow-up, nine month follow-up, or both. More than one third (34.5% of the children had subclinical PTSD, while 13.8% were likely to meet criteria for PTSD. Maternal PTSD was the strongest predictor for child PTSD. There were no significant differences in (subclinical PTSD symptoms either over time or compared to symptoms of survivors from the fire disaster. Conclusion This study shows that a considerable number of children have persistent PTSD after PICU treatment. Prevention of PTSD is important to minimize the profound adverse effects that PTSD can have on children's well-being and future development.

  6. Standard test method for determining a threshold stress intensity factor for environment-assisted cracking of metallic materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2003-01-01

    1.1 This test method covers the determination of the environment-assisted cracking threshold stress intensity factor parameters, KIEAC and KEAC, for metallic materials from constant-force testing of fatigue precracked beam or compact fracture specimens and from constant-displacement testing of fatigue precracked bolt-load compact fracture specimens. 1.2 This test method is applicable to environment-assisted cracking in aqueous or other aggressive environments. 1.3 Materials that can be tested by this test method are not limited by thickness or by strength as long as specimens are of sufficient thickness and planar size to meet the size requirements of this test method. 1.4 A range of specimen sizes with proportional planar dimensions is provided, but size may be variable and adjusted for yield strength and applied force. Specimen thickness is a variable independent of planar size. 1.5 Specimen configurations other than those contained in this test method may be used, provided that well-established stress ...

  7. Stress intensity factors for deep cracks emanating from the corner formed by a hole intersecting a plate surface

    Science.gov (United States)

    Mcgowan, J. J.; Smith, C. W.

    1976-01-01

    The stress intensity factors (SIFs) at the end points of flaws emanating from the corner formed by the intersection of a plate with a hole were determined using stress freezing photoelasticity and a numerical technique known as the Taylor series correction method to extract the SIF values from the photoelastic data. The geometries studied were crack depth to thickness ratios of about 0.2, 0.5, and 0.75; crack depth to crack length ratios of about 1.0 to 2.0; and crack length to hole radius ratios of about 0.5 to 2.0. The SIFs were determined at the intersection of the flaw border with the plate surface (KS) and with the edge of the hole (KH). It is shown that extension of a crack emanating from a corner of intersection of a hole with a plate under monotonically increasing load is not self-similar and that as the flaw depth increases, KH decreases and KS increases. Existing theories and design criteria significantly overestimate the SIF at both the hole and the surface except for shallow flaws at the hole and deep flaws at the surface.

  8. Montmorency Cherries Reduce the Oxidative Stress and Inflammatory Responses to Repeated Days High-Intensity Stochastic Cycling

    Directory of Open Access Journals (Sweden)

    Phillip G. Bell

    2014-02-01

    Full Text Available This investigation examined the impact of Montmorency tart cherry concentrate (MC on physiological indices of oxidative stress, inflammation and muscle damage across 3 days simulated road cycle racing. Trained cyclists (n = 16 were divided into equal groups and consumed 30 mL of MC or placebo (PLA, twice per day for seven consecutive days. A simulated, high-intensity, stochastic road cycling trial, lasting 109 min, was completed on days 5, 6 and 7. Oxidative stress and inflammation were measured from blood samples collected at baseline and immediately pre- and post-trial on days 5, 6 and 7. Analyses for lipid hydroperoxides (LOOH, interleukin-6 (IL-6, tumor necrosis factor-alpha (TNF-α, interleukin-8 (IL-8, interleukin-1-beta (IL-1-β, high-sensitivity C-reactive protein (hsCRP and creatine kinase (CK were conducted. LOOH (p < 0.01, IL-6 (p < 0.05 and hsCRP (p < 0.05 responses to trials were lower in the MC group versus PLA. No group or interaction effects were found for the other markers. The attenuated oxidative and inflammatory responses suggest MC may be efficacious in combating post-exercise oxidative and inflammatory cascades that can contribute to cellular disruption. Additionally, we demonstrate direct application for MC in repeated days cycling and conceivably other sporting scenario’s where back-to-back performances are required.

  9. Analysis of stress intensity factors for a new mechanical corrosion specimen; Analyse du facteur d`intensite de contrainte pour une nouvelle eprouvette de mecanique corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Rassineux, B; Crouzet, D; Le Hong, S

    1996-03-01

    Electricite de France is conducting a research program to determine corrosion cracking rates in the steam generators Alloy 600 tubes of the primary system. The objective is to correlate the cracking rates with the specimen stress intensity factor K{sub I}. One of the samples selected for the purpose of this study is the longitudinal notched specimen TEL (TEL: ``Tubulaire a Entailles Longitudinales``). This paper presents the analysis of the stress intensity factor and its experimental validation. The stress intensity factor has been evaluated for different loads using 3D finite element calculations with the Hellen-Parks and G({theta}) methods. Both crack initiation and propagation are considered. As an assessment of the method, the numerical simulations are in good agreement with the fatigue crack growth rates measured experimentally for TEL and compact tension (CT) specimens. (authors). 8 refs., 6 figs., 2 tabs.

  10. A tailored relocation stress intervention programme for family caregivers of patients transferred from a surgical intensive care unit to a general ward.

    Science.gov (United States)

    Lee, Seul; Oh, HyunSoo; Suh, YeonOk; Seo, WhaSook

    2017-03-01

    To develop and examine a relocation stress intervention programme tailored for the family caregivers of patients scheduled for transfer from a surgical intensive care unit to a general ward. Family relocation stress syndrome has been reported to be similar to that exhibited by patients, and investigators have emphasised that nurses should make special efforts to relieve family relocation stress to maximise positive contributions to the well-being of patients by family caregivers. A nonequivalent control group, nonsynchronised pretest-post-test design was adopted. The study subjects were 60 family caregivers of patients with neurosurgical or general surgical conditions in the surgical intensive care unit of a university hospital located in Incheon, South Korea. Relocation stress and family burden were evaluated at three times, that is before intervention, immediately after transfer and four to five days after transfer. This relocation stress intervention programme was developed for the family caregivers based on disease characteristics and relocation-related needs. In the experimental group, relocation stress levels significantly and continuously decreased after intervention, whereas in the control group, a slight nonsignificant trend was observed. Family burden levels in the control group increased significantly after transfer, whereas burden levels in the experimental group increased only marginally and nonsignificantly. No significant between-group differences in relocation stress or family burden levels were observed after intervention. Relocation stress levels of family caregivers were significantly decreased after intervention in the experimental group, which indicates that the devised family relocation stress intervention programme effectively alleviated family relocation stress. The devised intervention programme, which was tailored to disease characteristics and relocation-related needs, may enhance the practicality and efficacy of relocation stress

  11. Existence of solutions for the anti-plane stress for a new class of “strain-limiting” elastic bodies

    KAUST Repository

    Bulí ček, Miroslav; Má lek, Josef; Rajagopal, K. R.; Walton, Jay R.

    2015-01-01

    © 2015, Springer-Verlag Berlin Heidelberg. The main purpose of this study is to establish the existence of a weak solution to the anti-plane stress problem on V-notch domains for a class of recently proposed new models that could describe elastic materials in which the stress can increase unboundedly while the strain yet remains small. We shall also investigate the qualitative properties of the solution that is established. Although the equations governing the deformation that are being considered share certain similarities with the minimal surface problem, the boundary conditions and the presence of an additional model parameter that appears in the equation and its specific range makes the problem, as well as the result, different from those associated with the minimal surface problem.

  12. Existence of solutions for the anti-plane stress for a new class of “strain-limiting” elastic bodies

    KAUST Repository

    Bulíček, Miroslav

    2015-04-21

    © 2015, Springer-Verlag Berlin Heidelberg. The main purpose of this study is to establish the existence of a weak solution to the anti-plane stress problem on V-notch domains for a class of recently proposed new models that could describe elastic materials in which the stress can increase unboundedly while the strain yet remains small. We shall also investigate the qualitative properties of the solution that is established. Although the equations governing the deformation that are being considered share certain similarities with the minimal surface problem, the boundary conditions and the presence of an additional model parameter that appears in the equation and its specific range makes the problem, as well as the result, different from those associated with the minimal surface problem.

  13. Risk factors for the development of post-traumatic stress disorder and coping strategies in mothers and fathers following infant hospitalisation in the neonatal intensive care unit.

    Science.gov (United States)

    Aftyka, Anna; Rybojad, Beata; Rosa, Wojciech; Wróbel, Aleksandra; Karakuła-Juchnowicz, Hanna

    2017-12-01

    The aim of this study was to identify the potential risk factors for the development of post-traumatic stress disorder in mothers and fathers following infant hospitalisation in the neonatal intensive care unit. The development of neonatal intensive care units has increased the survival rate of infants. However, one of the major parental problems is post-traumatic stress disorder. An observational study covered 125 parents (72 mothers and 53 fathers) of infants aged 3-12 months who were hospitalised in the neonatal intensive care unit during the neonatal period. Third-referral neonatal intensive care unit. Several standardised and self-reported research tools were used to estimate the level of post-traumatic stress symptoms (Impact Event Scale-Revised), perceived stress (Perceived Stress Scale) and coping strategies (COPE Inventory). The respondents also completed a Parent and Infant Characteristic Questionnaire. The mothers and fathers did not differ in their parental and infant characteristics. Post-traumatic stress disorder was present in 60% of the mothers and 47% of the fathers. Compared to the fathers, the mothers felt greater stress (p = .020) and presented a higher severity of post-traumatic stress disorder (p stress disorder in the mothers. In the fathers, an Apgar test at 1 min after birth (p = .030) and a partner's post-traumatic stress disorder (p = .038) were related to post-traumatic stress disorder. The mothers compared to the fathers were more likely to use strategies such as: positive reinterpretation and growth, focusing on and venting of emotions, instrumental social support, religious coping and acceptance. In the fathers, the predictors included an Apgar score at 1 min after birth, a lack of congenital anomalies in the child and mental disengagement. Risk factors for post-traumatic stress disorder, as well as coping strategies, differ in women compare to men. Knowledge of risk factors for post-traumatic stress disorder, specific to

  14. Effect of Exercise Intensity on Neurotrophic Factors and Blood-Brain Barrier Permeability Induced by Oxidative-Nitrosative Stress in Male College Students.

    Science.gov (United States)

    Roh, Hee-Tae; Cho, Su-Youn; Yoon, Hyung-Gi; So, Wi-Young

    2017-06-01

    We investigated the effects of aerobic exercise intensity on oxidative-nitrosative stress, neurotrophic factor expression, and blood-brain barrier (BBB) permeability. Fifteen healthy men performed treadmill running under low-intensity (LI), moderate-intensity (MI), and high-intensity (HI) conditions. Blood samples were collected immediately before exercise (IBE), immediately after exercise (IAE), and 60 min after exercise (60MAE) to examine oxidative-nitrosative stress (reactive oxygen species [ROS]; nitric oxide [NO]), neurotrophic factors (brain-derived neurotrophic factor [BDNF]; nerve growth factor [NGF]), and blood-brain barrier (BBB) permeability (S-100β; neuron-specific enolase). ROS concentration significantly increased IAE and following HI (4.9 ± 1.7 mM) compared with that after LI (2.8 ± 1.4 mM) exercise (p exercise (p exercise (p exercise (p exercise (p .05). Moderate- and/or high-intensity exercise may induce higher oxidative-nitrosative stress than may low-intensity exercise, which can increase peripheral neurotrophic factor levels by increasing BBB permeability.

  15. Psychological rumination and recovery from work in intensive care professionals: associations with stress, burnout, depression and health.

    Science.gov (United States)

    Vandevala, Tushna; Pavey, Louisa; Chelidoni, Olga; Chang, Nai-Feng; Creagh-Brown, Ben; Cox, Anna

    2017-01-01

    The work demands of critical care can be a major cause of stress in intensive care unit (ICU) professionals and lead to poor health outcomes. In the process of recovery from work, psychological rumination is considered to be an important mediating variable in the relationship between work demands and health outcomes. This study aimed to extend our knowledge of the process by which ICU stressors and differing rumination styles are associated with burnout, depression and risk of psychiatric morbidity among ICU professionals. Ninety-six healthcare professionals (58 doctors and 38 nurses) who work in ICUs in the UK completed a questionnaire on ICU-related stressors, burnout, work-related rumination, depression and risk of psychiatric morbidity. Significant associations between ICU stressors, affective rumination, burnout, depression and risk of psychiatric morbidity were found. Longer working hours were also related to increased ICU stressors. Affective rumination (but not problem-solving pondering or distraction detachment) mediated the relationship between ICU stressors, burnout, depression and risk of psychiatric morbidity, such that increased ICU stressors, and greater affective rumination, were associated with greater burnout, depression and risk of psychiatric morbidity. No moderating effects were observed. Longer working hours were associated with increased ICU stressors, and increased ICU stressors conferred greater burnout, depression and risk of psychiatric morbidity via increased affective rumination. The importance of screening healthcare practitioners within intensive care for depression, burnout and psychiatric morbidity has been highlighted. Future research should evaluate psychological interventions which target rumination style and could be made available to those at highest risk. The efficacy and cost effectiveness of delivering these interventions should also be considered.

  16. The Influence of Oral Carbohydrate Solution Intake on Stress Response before Total Hip Replacement Surgery during Epidural and General Anaesthesia.

    Science.gov (United States)

    Çeliksular, M Cem; Saraçoğlu, Ayten; Yentür, Ercüment

    2016-06-01

    The effects of oral carbohydrate solutions, ingested 2 h prior to operation, on stress response were studied in patients undergoing general or epidural anaesthesia. The study was performed on 80 ASA I-II adult patients undergoing elective total hip replacement, which were randomized to four groups (n=20). Group G patients undergoing general anaesthesia fasted for 8 h preoperatively; Group GN patients undergoing general anaesthesia drank oral carbohydrate solutions preoperatively; Group E patients undergoing epidural anaesthesia fasted for 8 h and Group EN patients undergoing epidural anaesthesia drank oral carbohydrate solutions preoperatively. Groups GN and EN drank 800 mL of 12.5% oral carbohydrate solution at 24:00 preoperatively and 400 mL 2 h before the operation. Blood samples were taken for measurements of glucose, insulin, cortisol and IL-6 levels. The effect of preoperative oral carbohydrate ingestion on blood glucose levels was not significant. Insulin levels 24 h prior to surgery were similar; however, insulin levels measured just before surgery were 2-3 times higher in groups GN and EN than in groups G and E. Insulin levels at the 24(th) postoperative hour in epidural groups were increased compared to those at basal levels, although general anaesthesia groups showed a decrease. From these measurements, only the change in Group EN was statistically significant (poral carbohydrate nutrition did not reveal a significant effect on surgical stress response.

  17. T-stresses for internally cracked components

    International Nuclear Information System (INIS)

    Fett, T.

    1997-12-01

    The failure of cracked components is governed by the stresses in the vicinity of the crack tip. The singular stress contribution is characterised by the stress intensity factor K, the first regular stress term is represented by the so-called T-stress. T-stress solutions for components containing an internal crack were computed by application of the Bundary Collocation Method (BCM). The results are compiled in form of tables or approximative relations. In addition a Green's function of T-stresses is proposed for internal cracks which enables to compute T-stress terms for any given stress distribution in the uncracked body. (orig.) [de

  18. The treatment of residual stress in fracture assessment of pressure vessels

    International Nuclear Information System (INIS)

    Green, D.; Knowles, J.

    1992-01-01

    The treatment of weld residual stress in the fracture assessment of cylindrical pressure vessels is considered through partitioning the stress into membrane, bending and self-balancing through wall components. The influence of each on fracture behavior is discussed. Stress intensity factor solutions appropriate to each type of stress are presented. Short range, medium range and long range stress categories are identified according to simple rules relating the effect of increasing crack length to stress intensity factor and ligament net stress. Proposals are made on how the stress intensity factor from these stress types may be incorporated into a Kr, Lr based fracture assessment

  19. Stress

    Science.gov (United States)

    ... can be life-saving. But chronic stress can cause both physical and mental harm. There are at least three different types of stress: Routine stress related to the pressures of work, family, and other daily responsibilities Stress brought about ...

  20. Mechanical and environmental effects on stress corrosion cracking of low carbon pipeline steel in a soil solution

    International Nuclear Information System (INIS)

    Contreras, A.; Hernández, S.L.; Orozco-Cruz, R.; Galvan-Martínez, R.

    2012-01-01

    Highlights: ► Mechanical and environmental effects on SCC of X52 steel were investigated. ► Slow strain rate tests (SSRT) were performed in a soil solution (NS4). ► Different levels of polarization potentials were applied to mitigating SCC. ► SSRT results indicate that X52 pipeline steel was susceptible to SCC. ► SCC susceptibility increase as the yielding and ultimate tensile stress increase. -- Abstract: Mechanical and environmental effects on stress corrosion cracking (SCC) susceptibility of X52 pipeline steel were investigated using slow strain rate tests (SSRT) performed in a glass autoclave containing a soil solution at strain rate of 1 × 10 −6 in./s at room temperature. Polarization potentials of −100, −200 and −400 mV referred to open circuit potential (OCP) was applied in order to establish the effectiveness of cathodic protection in mitigating SCC of X52 pipeline steel. Electrochemical impedance spectroscopy (EIS) tests and scanning electron microscopy (SEM) observations were done in order to analyze the SCC process. SSRT results indicate that X52 pipeline steel was susceptible to SCC. Susceptibility to SCC increase as the yielding stress (YS) and ultimate tensile stress (UTS) increase. The EIS results showed that the highest corrosion of the steel sample was obtained when the highest cathodic over potential was applied. SEM observations of these specimens showed a brittle type of fracture with transgranular appearance. The failure and SCC of X52 steel in soil solution was explained by hydrogen mechanism.

  1. Threshold stress intensity factor for delayed hydride cracking of a recrystallized N18 alloy plate along the rolling direction

    Energy Technology Data Exchange (ETDEWEB)

    Sun Chao, E-mail: sunchaonpic@yahoo.com.c [National Key Laboratory for Nuclear Fuel and Materials, Nuclear Power Institute of China, P.O. Box 436, Chengdu 610041 (China); Tan Jun; Ying Shihao; Peng Qian [National Key Laboratory for Nuclear Fuel and Materials, Nuclear Power Institute of China, P.O. Box 436, Chengdu 610041 (China); Li Cong [Department of R and D, State Nuclear Power Technology Corporation Limited, Beijing (China)

    2010-11-15

    The objective of this study is to obtain the threshold stress intensity factor, K{sub IH}, for an initiation of delayed hydride cracking in a recrystallized N18 (Zr-Sn-Nb-Fe-Cr) alloy plate which was manufactured in China, gaseously charged with 60 ppm of hydrogen by weight. By using both the load increasing method and load drop method, the K{sub IH}'s along the rolling direction were investigated over a temperature range of 150-255 {sup o}C. The results showed that K{sub IH} along the rolling direction was found to be higher in the load increasing method than that in the load drop method. In the load increasing method, K{sub IH}'s of the N18 alloy plate appeared to be in the range of 31-32.5MPa{radical}(m), and K{sub IH} in the load drop method appeared to be in the range of 27.5-28.6MPa{radical}(m). This means that the N18 alloy plate has high tolerance for DHC initiation along the rolling direction. The texture of a N18 alloy plate was investigated using an X-ray diffraction and the K{sub IH} was discussed based on texture and analytically as a function of the tilting angle of hydride habit planes to the cracking plane.

  2. Threshold stress intensity factor for delayed hydride cracking of a recrystallized N18 alloy plate along the rolling direction

    International Nuclear Information System (INIS)

    Sun Chao; Tan Jun; Ying Shihao; Peng Qian; Li Cong

    2010-01-01

    The objective of this study is to obtain the threshold stress intensity factor, K IH , for an initiation of delayed hydride cracking in a recrystallized N18 (Zr-Sn-Nb-Fe-Cr) alloy plate which was manufactured in China, gaseously charged with 60 ppm of hydrogen by weight. By using both the load increasing method and load drop method, the K IH 's along the rolling direction were investigated over a temperature range of 150-255 o C. The results showed that K IH along the rolling direction was found to be higher in the load increasing method than that in the load drop method. In the load increasing method, K IH 's of the N18 alloy plate appeared to be in the range of 31-32.5MPa√(m), and K IH in the load drop method appeared to be in the range of 27.5-28.6MPa√(m). This means that the N18 alloy plate has high tolerance for DHC initiation along the rolling direction. The texture of a N18 alloy plate was investigated using an X-ray diffraction and the K IH was discussed based on texture and analytically as a function of the tilting angle of hydride habit planes to the cracking plane.

  3. Investigation of the Stress Intensity Limits of ASME Section III Div.5 for Structure Design Criteria of SFR Fuel Assembly

    International Nuclear Information System (INIS)

    Choo, Jin-Yup; Kim, Hyung-Kyu; Cheon, Jin-Sik

    2017-01-01

    In this paper, the stress intensity limits, Sm and St of HT-9 were built for the structural criteria of an SFR fuel assembly. Sm is obtained from the ultimate strength. As for St, it is more complicated because of its dependency of time duration in addition to temperature. Following the definition of Smt, the method in the ASME Sec. III Div. 1, Subsec. NH was consulted. We found that the Sm is adopted as Smt under the temperature about 470 .deg. C which is relatively low temperature range and over 470 .deg. C with relatively short time duration as 1000 hours. And the St is adopted as Smt at over 470 .deg. C and long time duration over 34800 hours, and over 520 .deg. C and 104 hours too. And at over 570 .deg. C and 1000 hours, and at over 630 .deg. C and 100 hours, St is also adopted for Smt. To use the present result as design criteria, a stringent examination needs to be carried out, because those are calculated from the formulae of HT-9 without an experimental validation. Therefore, an experimental work on the mechanical properties of HT-9 will be necessary.

  4. Occupational stress and mental health among nurses in a medical intensive care unit of a general hospital in Bandar Abbas in 2013.

    Science.gov (United States)

    Tajvar, Abdolhamid; Saraji, Gebraeil Nasl; Ghanbarnejad, Amin; Omidi, Leila; Hosseini, Seyed Sodabeh Seyed; Abadi, Ali Salehi Sahl

    2015-07-01

    Many nurses have reported experiencing high levels of occupational stress in their work environment. Stress, as an outcome of stressful workplaces and tasks, affects nursing behavior in hospital wards. The objectives of this research were to determine the prevalence of occupational stress and mental health problems in nurses in the intensive care unit (ICU) at Shahid Mohammadi Hospital in Bandar Abbas in 2013 and to determine the relationship between occupational stress and mental health. This cross-sectional study was conducted in 2013 on all of the nurses working in ICU at Shahid Mohammadi Hospital located in Bandar Abbas, Iran. Seventy-two nurses were selected as the population for this study, and all of them were female. Two questionnaires were used in this study, i.e., General Health Questionnaire-28 (GHQ-28) for assessing mental health and an occupational stress test for assessing job stress. Furthermore, the relationship between occupational stress and mental health was examined. One-way analysis of variance (ANOVA), independent samples t-test, and Pearson's product-moment correlation test were used to analyze the data. High and moderate levels of occupational stress were experienced by 83.9% and 10.7% of ICU nurses, respectively. The prevalence of mental disorders, somatic symptoms, anxiety, social dysfunction, and depression were 58.9, 60.7, 62.5, 71.4, and 10.7%, respectively. The findings of the independent samples t-test showed that somatic symptoms had significant relationships with age and working experience (p = 0.01). According to the independent samples t-test, there were no significant differences between somatic symptoms and working different shifts (p > 0.05). There was a high prevalence of occupational stress among ICU nurses. There was a significant relationship between occupational stress and mental health. Future interventions are needed to codify a comprehensive health program in this field to reduce occupational stress and enhance nurses

  5. Starting solutions for the flow of second grade fluids in a rectangular channel due to an oscillating shear stress

    Science.gov (United States)

    Vieru, Dumitru; Fetecau, Corina; Rana, Mehwish

    2012-05-01

    The unsteady motion of a second grade fluid between two parallel side walls perpendicular to a plate is studied by means of the Fourier sine and cosine transforms. Initially, the fluid is at rest and at time t = 0+, the plate applies an oscillating shear to the fluid. The solutions that have been obtained, presented under integral and series form and written as a sum between steady time-periodic and transient solutions can be easily reduced to the similar solutions for Newtonian fluids performing the same motion. They describe the motion of the fluid some time after its initiation. After that time, when the transient solutions disappear, the motion of the fluid is described by the steady time-periodic solutions that are independent of the initial conditions. In the absence of side walls, more exactly when the distance between walls tends to infinity, all solutions reduce to those corresponding to the motion over an infinite plate. As it was to be expected, the steady time-periodic solutions corresponding to sine and cosine oscillations of the shear stress on the boundary differ by a phase shift. Finally, the influence of side walls on the fluid motion, the required time to reach the steady periodic flow, as well as the distance between walls for which the velocity of the fluid in the middle of the channel is unaffected by their presence are established by numerical calculus and graphical illustrations. As expected, the time needed to reach the steady periodic flows is lower in the presence of side walls. It is lower for Newtonian fluids in comparison with second grade fluids and greater for sine oscillations in comparison to the cosine oscillations of the boundary shear.

  6. Oxidative Stress Associated with Chilling Injury in Immature Fruit: Postharvest Technological and Biotechnological Solutions.

    Science.gov (United States)

    Valenzuela, Juan Luis; Manzano, Susana; Palma, Francisco; Carvajal, Fátima; Garrido, Dolores; Jamilena, Manuel

    2017-07-08

    Immature, vegetable-like fruits are produced by crops of great economic importance, including cucumbers, zucchini, eggplants and bell peppers, among others. Because of their high respiration rates, associated with high rates of dehydration and metabolism, and their susceptibility to chilling injury (CI), vegetable fruits are highly perishable commodities, requiring particular storage conditions to avoid postharvest losses. This review focuses on the oxidative stress that affects the postharvest quality of vegetable fruits under chilling storage. We define the physiological and biochemical factors that are associated with the oxidative stress and the development of CI symptoms in these commodities, and discuss the different physical, chemical and biotechnological approaches that have been proposed to reduce oxidative stress while enhancing the chilling tolerance of vegetable fruits.

  7. Spectral fitting method for the solution of time-dependent Schroedinger equations: Applications to atoms in intense laser fields

    International Nuclear Information System (INIS)

    Qiao Haoxue; Cai Qingyu; Rao Jianguo; Li Baiwen

    2002-01-01

    A spectral fitting method for solving the time-dependent Schroedinger equation has been developed and applied to the atom in intense laser fields. This method allows us to obtain a highly accurate time-dependent wave function with a contribution from the high-order term of Δt. Moreover, the time-dependent wave function is determined on a small number of discrete mesh points, thus making calculations simple and accurate. This method is illustrated by computing wave functions and harmonic generation spectra of a model atom in laser fields

  8. Bias-stress characterization of solution-processed organic field-effect transistor based on highly ordered liquid crystals

    Science.gov (United States)

    Kunii, M.; Iino, H.; Hanna, J.

    2017-06-01

    Bias-stress effects in solution-processed, 2-decyl-7-phenyl-[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-10) field effect transistors (FETs) are studied under negative and positive direct current bias. The bottom gate, bottom contact polycrystalline Ph-BTBT-10 FET with a hybrid gate dielectric of polystyrene and SiO2 shows high field effect mobility as well as a steep subthreshold slope when fabricated with a highly ordered smectic E liquid crystalline (SmE) film as a precursor. Negative gate bias-stress causes negative threshold voltage shift (ΔVth) for Ph-BTBT-10 FET in ambient air, but ΔVth rapidly decreases as the gate bias decreases and approaches to near zero when the gate bias goes down to 9 V in amplitude. In contrast, positive gate bias-stress causes negligible ΔVth even with a relatively high bias voltage. These results conclude that Ph-BTBT-10 FET has excellent bias-stress stability in ambient air in the range of low to moderate operating voltages.

  9. Ultrasound assisted destruction of estrogen hormones in aqueous solution: Effect of power density, power intensity and reactor configuration

    International Nuclear Information System (INIS)

    Suri, Rominder P.S.; Nayak, Mohan; Devaiah, Uthappa; Helmig, Edward

    2007-01-01

    There are many reports documenting the adverse effects, such as feminization of fish, of estrogen hormones in the environment. One of the major sources of these compounds is from municipal wastewater effluents. The biological processes at municipal wastewater treatment plants cannot completely remove these compounds. This paper discusses the use of ultrasound to destroy estrogen compounds in water. The study examines the effect of ultrasound power density and power intensity on the destruction of various estrogen compounds which include: 17α-estradiol, 17β-estradiol, estrone, estriol, equilin, 17α-dihydroequilin, 17α-ethinyl estradiol and norgestrel. These tests were conducted in single component batch and flow through reactors using 0.6, 2 and 4 kW ultrasound sources. The sonolysis process produced 80-90% destruction of individual estrogens at initial concentration of 10 μg/L within 40-60 min of contact time. First order rate constants for the individual compounds under different conditions are presented. The estrogen degradation rates increase with increase in power intensity. However, the energy efficiency of the reactor was higher at lower power density. The 4 kW ultrasound reactor was more energy efficient compared to the 0.6 and 2 kW sonicators

  10. Incidence and Risk Factors for Intensive Care Unit–related Post-traumatic Stress Disorder in Veterans and Civilians

    Science.gov (United States)

    Jackson, James C.; Morandi, Alessandro; Girard, Timothy D.; Hughes, Christopher G.; Thompson, Jennifer L.; Kiehl, Amy L.; Elstad, Mark R.; Wasserstein, Mitzi L.; Goodman, Richard B.; Beckham, Jean C.; Chandrasekhar, Rameela; Dittus, Robert S.; Ely, E. Wesley; Pandharipande, Pratik P.

    2016-01-01

    Rationale: The incidence and risk factors of post-traumatic stress disorder (PTSD) related to the intensive care unit (ICU) experience have not been reported in a mixed veteran and civilian cohort. Objectives: To describe the incidence and risk factors for ICU-related PTSD in veterans and civilians. Methods: This is a prospective, observational, multicenter cohort enrolling adult survivors of critical illness after respiratory failure and/or shock from three Veterans Affairs and one civilian hospital. After classifying those with/without preexisting PTSD (i.e., PTSD before hospitalization), we then assessed all subjects for ICU-related PTSD at 3 and 12 months post hospitalization. Measurements and Main Results: Of 255 survivors, 181 and 160 subjects were assessed for ICU-related PTSD at 3- and 12-month follow-up, respectively. A high probability of ICU-related PTSD was found in up to 10% of patients at either follow-up time point, whether assessed by PTSD Checklist Event-Specific Version (score ≥ 50) or item mapping using the Diagnostic and Statistical Manual of Mental Disorders-IV (DSM-IV). In the multivariable regression, preexisting PTSD was independently associated with ICU-related PTSD at both 3 and 12 months (P < 0.001), as was preexisting depression (P < 0.03), but veteran status was not a consistent independent risk factor for ICU-related PTSD (3-month P = 0.01, 12-month P = 0.48). Conclusions: This study found around 1 in 10 ICU survivors experienced ICU-related PTSD (i.e., PTSD anchored to their critical illness) in the year after hospitalization. Preexisting PTSD and depression were strongly associated with ICU-related PTSD. PMID:26735627

  11. A faculty-led solution to transport-related stress among South African ...

    African Journals Online (AJOL)

    Background. In many parts of the developing world the lack of consistent and affordable transport may be a serious obstacle to education and a unique sociocultural cause of stress among undergraduate students. Objective. To determine the student-perceived benefits of a faculty-led, grassroots student transport service for ...

  12. A database for analysis of speech under physical stress: detection of exercise intensity while running and talking

    NARCIS (Netherlands)

    Truong, Khiet Phuong; Nieuwenhuys, Arne; Beek, Peter; Evers, Vanessa

    One of the ways to gauge your own exercise intensity while running, is to assess your capability of talking while running: if you can still speak comfortably, you are running within the recommended intensity guidelines. This subjective way of estimating one's exercise intensity by talking (i.e. the

  13. Effect of the low- versus high-intensity exercise training on endoplasmic reticulum stress and GLP-1 in adolescents with type 2 diabetes mellitus.

    Science.gov (United States)

    Lee, Sung Soo; Yoo, Jae Ho; So, Yong Seok

    2015-10-01

    [Purpose] The primary objective of this study was to investigate the effect of low-intensity exercise training compare with high-intensity exercise training on endoplasmic reticulum stress and glucagon-like peptide-1 in adolescents with type 2 diabetes mellitus. [Subjects and Methods] The low-intensity exercise training group performed aerobic exercise training at an intensity of ≤ 45% of the heart rate reserve. The high-intensity interval exercise training group performed interval exercise training at an intensity of ≥ 80% of the heart rate reserve. The exercise-related energy consumption was determined for both groups on a per-week basis (1,200 kcal/week). [Results] Both groups showed improvement in the glucose-regulated protein 78 and dipeptidyl peptidase-4, but the size of the between-group effect was not statistically significant. The high-intensity interval exercise training group showed a significant reduction in percentage body fat. The C-peptide level increased after the 12-weeks programs and was significantly different, between the groups. Fasting glucose, insulin resistance in the fasting state according to homeostasis model assessment, and leptin decreased after the 12-weeks exercise program and were significantly different between the groups, and glucagon-like peptide-1 increased after the 12-week exercise programs and was significantly different between the groups. [Conclusion] In conclusion high-intensity interval exercise training, as defined in this study, may lead to improvements in body composition, glycemic control, endoplasmic reticulum stress, and the glucagon-like peptide-1 in adolescents with type 2 diabetes mellitus.

  14. Stressing the main points, striving for benefits, conscientiously strengthening the geological work for solution mining

    International Nuclear Information System (INIS)

    Zhang Weixing

    1995-01-01

    Based on the present situation of uranium geology in China being confronted with and the actual conditions of the development of uranium geology at home and abroad, the authors expounds that prospecting for economically minable and solution leachable uranium deposit is an inevitable choice for the uranium geological work in China, which must be aimed at economic benefits and the focal point of the work should currently be put on prospecting for economically in-situ leachable deposit, especially the solution minable sandstone type uranium deposit. Some measures for ensuring the smooth realization of prospecting targets in uranium geology are also proposed

  15. Effects of CaCl2 solutions to alleviate drought stress effects in potted ornamentals Salvia splendens and Ageratum houstonianum

    Directory of Open Access Journals (Sweden)

    Agata Jędrzejuk

    2016-09-01

    Full Text Available Bedding plants are often subjected to soil water deficit – either after planting and/or during the market chain. Methods to alleviate the negative water stress effects are sought for to preserve ornamental values of plants. The aim of this study was to evaluate the response of two bedding plants, Ageratum houstonianum Mill. and Salvia splendens Sellow ex Scult., to water stress and treatments with calcium chloride aimed to alleviate drought effects. Plants were subjected either to 45 days of periodical stress (five cycles when watering was off for 5 consecutive days, followed by four cycles on for 5 consecutive days or 10 days of radical drought (complete water withdrawal. On the first day, before the onset of drought, plants were watered with 0.5% Ca or 1% Ca w/v as a solution of calcium chloride (5 g or 10 g Ca per 1 dm3 of the growing substrate. The similarly Ca-treated but routinely watered plants provided controls to evaluate the water shortage effects. Plant height, inflorescence length/number, leaf number, leaf area (in Salvia splendens only, aboveground plant part weight, and root weight (in Salvia splendens only as well as leaf relative water content (RWC were measured at the beginning and at the end of the experiments. Water withdrawal during 10 days of growth (radical drought reduced by half RWC in leaves of withering Salvia splendens and Ageratum houstonianum plants. Its effects on the growth parameters were less pronounced and mitigated by Ca applications. Also in the periodically stressed plants of both species, RWC and most growth parameters were reduced by water shortage but Ca applications alleviated the negative stress effects.

  16. Project of integrity assessment of flawed components with structural discontinuity (IAF). Data book for estimation stress intensity factor. Surface crack on ICM housing for penetration in reactor vessel

    International Nuclear Information System (INIS)

    2012-12-01

    The project of Integrity Assessment of Flawed Components with Structural Discontinuity (IAF) was entrusted to Japan Power Engineering and Inspection Corporation (JAPEIC) from Nuclear and Industrial Safety Agency (NISA) and started from FY 2001. And then, it was taken over to Japan Nuclear Energy Safety Organization (JNES) which was established in October 2003 and carried out until FY 2007. In the IAF project, weld joints between nickel based alloys and low alloy steels around penetrations in reactor vessel, safe-end of nozzles and shroud supports were selected from among components and pipe arrangements in nuclear power plants, where high residual stresses were generated due to welding and complex structure. Residual stresses around of the weld joints were estimated by finite element analysis method (FEM) with a general modeling method, then the reasonability and the conservativeness was evaluated. In addition, for postulated surface crack of stress corrosion cracking (SCC), a simple calculation method of stress intensity factor (K) required to estimate the crack growth was proposed and the effectiveness was confirmed. JNES compiled results of the IAF project into Data Books of Residual Stress Analysis of Weld Joint, and Data Book of Simplified Stress Intensity Factor Calculation for Penetration of Reactor as typical Structure Discontinuity, respectively. Data Books of Residual Stress Analysis in Weld Joint. 1. Butt Weld Joint of Small Diameter Cylinder (4B Sch40) (JNES-RE-2012-0005), 2. Dissimilar Metal Weld Joint in Safe End (One-Side Groove Joint (JNES-RE-2012-0006), 3. Dissimilar Metal Weld Joint in Safe End (Large Diameter Both-Side Groove Joint) (JNES-RE-2012-0007), 4. Weld Joint around Penetrations in Reactor Vessel (Insert Joint) (JNES-RE-2012-0008), 5. Weld Joint in Shroud Support (H8, H9, H10 and H11 Welds) (JNES-RE-2012-0009), 6. Analysis Model of Dissimilar Metal Weld Joint Applied Post Weld Heat Treatment (PWHT) (JNES-RE-2012-0010). Data Book of

  17. Development of stress ulcers assessed by gastric electrical potential difference, pH of gastric juice, and endoscopy in patients in the intensive care unit

    DEFF Research Database (Denmark)

    Rubinstein, E; Gjørup, I; Schulze, S

    1992-01-01

    OBJECTIVE: To assess measurement of gastric electrical potential difference, pH of gastric mucosa, and endoscopic findings in patients in intensive care units who are at risk of developing stress ulcers. DESIGN: Open comparison with age- and sex-matched control subjects. SETTING: Herlev Hospital......, Denmark. SUBJECTS: Sixteen consecutive patients with no history of gastrointestinal haemorrhage, coagulopathy, or ulcer disease who had been admitted to the intensive care unit, and 16 age- and sex-matched outpatients with normal endoscopic findings. INTERVENTIONS: Upper gastrointestinal endoscopy, during...... which any lesions that were found were scored according to severity, the gastric potential difference, and the pH of gastric juice were measured. OUTCOME MEASURES: Correlation between the incidence of stress ulceration found at endoscopy, gastric potential difference, and gastric pH. RESULTS: Gastric...

  18. Initiation of Stress Corrosion Cracking of 26Cr-1Mo Ferritic Stainless Steels in Hot Chloride Solution

    International Nuclear Information System (INIS)

    Kwon, H. S.; Hehemann, R. F.

    1987-01-01

    Elongation measurements of 26Cr-1Mo ferritic stainless steels undergoing stress corrosion in boiling LiCl solution allow the induction period to be distinguished from the propagation period of cracks by the deviation of elongation from the logarithmic creep law. Localised corrosion cells are activated exclusively at slip steps by loading and developed into corrosion trenches. No cracks have developed from the corrosion trenches until the induction period is exceeded. The induction period is regarded as a time for localised corrosion cells to achieve a critical degree of occlusion for crack initiation. The repassivation rate of exposed metal by creep or emergence of slip steps decreases as the load increases and is very sensitive to the microstructural changes that affect slip tep height. The greater susceptibility to stress corrosion cracking of either prestrained or grain coarsened 26Cr-1Mo alloy compared with that of mill annealed material results from a significant reduction of repassivation rate associated with the increased slip step height. The angular titanium carbonitrides particles dispersed in Ti-stabilized 26Cr-1Mo alloy have a detrimental effect on the resistance to stress corrosion cracking

  19. Approximate solution of oil film load-carrying capacity of turbulent journal bearing with couple stress flow

    Science.gov (United States)

    Zhang, Yongfang; Wu, Peng; Guo, Bo; Lü, Yanjun; Liu, Fuxi; Yu, Yingtian

    2015-01-01

    The instability of the rotor dynamic system supported by oil journal bearing is encountered frequently, such as the half-speed whirl of the rotor, which is caused by oil film lubricant with nonlinearity. Currently, more attention is paid to the physical characteristics of oil film due to an oil-lubricated journal bearing being the important supporting component of the bearing-rotor systems and its nonlinear nature. In order to analyze the lubrication characteristics of journal bearings efficiently and save computational efforts, an approximate solution of nonlinear oil film forces of a finite length turbulent journal bearing with couple stress flow is proposed based on Sommerfeld and Ocvirk numbers. Reynolds equation in lubrication of a finite length turbulent journal bearing is solved based on multi-parametric principle. Load-carrying capacity of nonlinear oil film is obtained, and the results obtained by different methods are compared. The validation of the proposed method is verified, meanwhile, the relationships of load-carrying capacity versus eccentricity ratio and width-to-diameter ratio under turbulent and couple stress working conditions are analyzed. The numerical results show that both couple stress flow and eccentricity ratio have obvious influence on oil film pressure distribution, and the proposed method approximates the load-carrying capacity of turbulent journal bearings efficiently with various width-to-diameter ratios. This research proposes an approximate solution of oil film load-carrying capacity of turbulent journal bearings with different width-to-diameter ratios, which are suitable for high eccentricity ratios and heavy loads.

  20. Investigation of the Stress Intensity Limits of ASME Section III Div.5 for Structure Design Criteria of SFR Fuel Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Choo, Jin-Yup; Kim, Hyung-Kyu; Cheon, Jin-Sik [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    These affect the mechanical design of the fuel assembly components. And thus, appropriate structural design criteria should also be chosen to incorporate the specific design conditions of the SFR fuel assemblies. Among them, the temperature is one of the most crucial conditions to be concerned because the sodium coolant temperature is normally more than 500ºC which is much higher than that of the LWR (< 350ºC). This implies that a thermal creep should be significantly considered in the SFR fuel assembly mechanical design. In addition to the high temperature condition, an irradiation swelling is also an important behavior that the SFR fuel assembly material should accommodate. To incorporate the temperature and irradiation impacts, the material of the fuel assembly components is presently determined to be made of HT-9, the ferriticmartensitic steel. In this paper, the ASME Sec. III Div. 5 (referred to as ‘Div. 5’ hereinafter), which was developed for a ‘high temperature reactor’, is considered as one of the structural design criteria for the mechanical design of SFR fuel assemblies. In this paper, the stress intensity limits, S{sub m} and S{sub t} of HT-9 were built for the structural criteria of an SFR fuel assembly. S{sub m} is obtained from the ultimate strength. As for S{sub t}, it is more complicated because of its dependency of time duration in addition to temperature. Following the definition of S{sub mt}, the method in the ASME Sec. III Div. 1, Subsec. NH was consulted. We found that the Sm is adopted as S{sub mt} under the temperature about 470ºC which is relatively low temperature range and over 470ºC with relatively short time duration as 1000 hours. And the S{sub t} is adopted as Smt at over 470ºC and long time duration over 34800 hours, and over 520ºC and 10{sup 4} hours too. And at over 570ºC and 1000 hours, and at over 630ºC and 100 hours, S{sub t} is also adopted for S{sub mt}.

  1. Finding a solution: Heparinised saline versus normal saline in the maintenance of invasive arterial lines in intensive care.

    Science.gov (United States)

    Everson, Matthew; Webber, Lucy; Penfold, Chris; Shah, Sanjoy; Freshwater-Turner, Dan

    2016-11-01

    We assessed the impact of heparinised saline versus 0.9% normal saline on arterial line patency. Maintaining the patency of arterial lines is essential for obtaining accurate physiological measurements, enabling blood sampling and minimising line replacement. Use of heparinised saline is associated with risks such as thrombocytopenia, haemorrhage and mis-selection. Historical studies draw variable conclusions but suggest that normal saline is at least as effective at maintaining line patency, although recent evidence has questioned this. We conducted a prospective analysis of the use of heparinised saline versus normal saline on unselected patients in the intensive care of our hospital. Data concerning duration of 471 lines insertion and reason for removal was collected. We found a higher risk of blockage for lines flushed with normal saline compared with heparinised saline (RR = 2.15, 95% CI 1.392-3.32, p  ≤ 0.001). Of the 56 lines which blocked initially (19 heparinised saline and 37 normal saline lines), 16 were replaced with new lines; 5 heparinised saline lines and 11 normal saline lines were reinserted; 5 of these lines subsequently blocked again, 3 of which were flushed with normal saline. Our study demonstrates a clinically important reduction in arterial line longevity due to blockages when flushed with normal saline compared to heparinised saline. We have determined that these excess blockages have a significant clinical impact with further lines being inserted after blockage, resulting in increased risks to patients, wasted time and cost of resources. Our findings suggest that the current UK guidance favouring normal saline flushes should be reviewed.

  2. Stress Analysis of a TRISO Coated Particle Fuel by Using ABAQUS Finite Element Visco-Elastoplastic Solutions

    International Nuclear Information System (INIS)

    Cho, Moon Sung; Kim, Y. M.; Lee, Y. W.

    2006-01-01

    The fundamental design for a gas-cooled reactor relies on an understanding of the behavior of a coated particle fuel. KAERI, which has been carrying out the Korean VHTR (Very High Temperature modular gas cooled Reactor) Project since 2004, is developing a fuel performance analysis code for a VHTR named COPA (COated Particle fuel Analysis). A validation of COPA was attempted by comparing its benchmark results with the visco-elastic solutions obtained from the ABAQUS code calculations for the IAEA-CRP-6 TRISO coated particle benchmark problems involving a creep, swelling, and pressure. However, the ABAQUS finite element model used for the above-mentioned analysis did not consider the material nonlinearity of the SiC coating layer that showed stress levels higher than the assumed yield point of the material. In this study, a consideration of the material nonlinearity is included in the ABAQUS model to obtain the visco-elastoplastic solutions and the results are compared with the visco-elastic solutions obtained from the previous ABAQUS model

  3. High- but not low-intensity light leads to oxidative stress and quality loss of cold-stored baby leaf spinach.

    Science.gov (United States)

    Glowacz, Marcin; Mogren, Lars M; Reade, John P H; Cobb, Andrew H; Monaghan, James M

    2015-07-01

    Quality management in the fresh produce industry is an important issue. Spinach is exposed to various adverse conditions (temperature, light, etc.) within the supply chain. The present experiments were conducted to investigate the effect of light conditions (dark, low-intensity light (LL) and high-intensity light (HL)) and photoperiod (6 h HL and 18 h dark) on the quality changes of cold-stored spinach. HL exposure resulted in oxidative stress, causing tissue damage and quality loss as evidenced by increased membrane damage and water loss. The content of total ascorbic acid was reduced under HL conditions. On the other hand, storage of spinach under LL conditions gave promising results, as nutritional quality was not reduced, while texture maintenance was improved. No significant differences, with the exception of nutritional quality, were found between spinach leaves stored under continuous (24 h) low-intensity light (30-35 µmol m(-2) s(-1)) and their counterparts stored under the same light integral over 6 h (130-140 µmol m(-2) s(-1)). LL extended the shelf-life of spinach. The amount of light received by the leaves was the key factor affecting produce quality. Light intensity, however, has to be low enough not to cause excess oxidative stress and lead to accelerated senescence. © 2014 Society of Chemical Industry.

  4. Effect of Chinese traditional medicine anti-fatigue prescription on the concentration of the serum testosterone and cortisol in male rats under stress of maximum intensive training

    International Nuclear Information System (INIS)

    Dong Ling; Si Xulan

    2008-01-01

    Objective: To study the effect of chinese traditional medicine anti-fatigue prescription on the concentration of the serum testosterone (T) and cortisol (C) in male rats under the stress of maximum intensive training. Methods: Wistar male rat models of stress under maximum intensity training were established (n=40) and half of them were treated with Chinese traditional medicine anti-fatigue prescription twenty undisturbed rats served as controls. Testosterone and cortisol serum levels were determined with RIA at the end of the seven weeks' experiment. Results: Maximum intensive training would cause the level of the serum testosterone lowered, the concentration of the cortisol elevated and the ratio of T/C reduced. The serum T levels and T/C ratio were significantly lower and cortisol levels significantly higher in the untreated models than those in the treated models and controls (P<0.01). The levels of the two hormones were markedly corrected in the treated models with no significantly differences from those in the controls. However, the T/C ratio was still significantly lower than that in the controls (P <0.05) due to a relatively slightly greater degree of reduction of T levels. Conclusion: Anti-fatigue prescription can not only promote the recovery of fatigue after the maximum intensive training but also strengthen the anabolism of the rats. (authors)

  5. Stress relaxation in solution-annealed and 20% cold-worked Type 316 stainless steel

    International Nuclear Information System (INIS)

    Thomas, J.F. Jr.; Yaggee, F.L.

    1975-01-01

    Relaxation experiments were conducted at room temperature and various levels of tensile plastic strain. The data for both solution-annealed (SA) and 20 percent cold-worked (CW) material can be presented in terms of a single family of nonintersecting hardness curves. Although the hardness curves for SA can be reduced to a master curve, those for CW fail to fit this master curve at strain rates below 5 x 10 -6 s -1 . The slope of the hardness scaling relation increases with plastic deformation. (DLC)

  6. Correlations of the glycemic variability with oxidative stress and erythrocytes membrane stability in patients with type 1 diabetes under intensive treatment.

    Science.gov (United States)

    Rodrigues, Ricardo; Alves de Medeiros, Luciana; Moreira Cunha, Lucas; da Silva Garrote-Filho, Mario; Bernardino Neto, Morun; Tannus Jorge, Paulo; Santos Resende, Elmiro; Penha-Silva, Nilson

    2018-02-07

    This study aimed to evaluate the correlations of glycemic variability with erythrocyte membrane stability parameters and oxidative stress markers in patients with DM1 under intensive treatment. 90 patients with DM1 and under intensive treatment of the disease were evaluated in relation to anthropometric indices, records of glycemic averages and parameters of glycemic variability, biochemical dosages (glucose, uric acid, lipidogram, glycated hemoglobin, microalbuminuria, creatinine and iron) reticulocyte count, erythrocyte membrane stability parameters and oxidative stress markers (thiobarbituric acid reactive substances, TBARS, and glutathione reductase, GR). Indicators of glycemic variability in the short and long term showed correlations with parameters of membrane stability and markers of oxidative stress (GR). In addition, the comparison of these same parameters between the subgroups consisting of quartiles of GV or glycemic control also showed significant differences. In the DM1 patients studied here, glycemic variability showed correlations with oxidative stress and erythrocyte membrane stability variables. This corroborates the hypothesis that glycemic fluctuations interfere with lipid peroxidation and cell membrane behavior, emphasizing its participation in mechanisms related to the development of chronic complications of diabetes. Copyright © 2018 Elsevier B.V. All rights reserved.

  7. Anodic characteristics and stress corrosion cracking behavior of nickel rich alloys in bicarbonate and buffer solutions

    International Nuclear Information System (INIS)

    Zadorozne, Natalia S.; Giordano, Mabel C.; Ares, Alicia E.; Carranza, Ricardo M.; Rebak, Raul B.

    2016-01-01

    Highlights: • We investigate which element in alloy C-22 may be responsible for the cracking susceptibility of the high nickel alloy. • Six nickel based alloys with different amount of Cr and Mo were selected for the electrochemical tests and response to SSRT. • Polarization tests showed that an anodic peak appear in the passive region in Cr containing alloys. • Cracking of Ni alloys in carbonate solutions seem to be a consequence of the instability of the passivating chromium oxide. • Alloys containing both Cr and Mo have the highest susceptibility. - Abstract: The aim of this work is to investigate which alloying element in C-22 is responsible for the cracking susceptibility of the alloy in bicarbonate and two buffer solutions (tungstate and borate). Six nickel based alloys, with different amount of chromium (Cr) and molybdenum (Mo) were tested using electrochemical methods and slow strain rate tests (SSRT) at 90 °C. All Cr containing alloys had transgranular cracking at high anodic potential; however, C-22 containing high Cr and high Mo was the most susceptible alloy to cracking. Bicarbonate was the most aggressive of three tested environments of similar pH.

  8. The Effects of a Korean Ginseng, GINST15, on Hypo-Pituitary-Adrenal and Oxidative Activity Induced by Intense Work Stress.

    Science.gov (United States)

    Flanagan, Shawn D; DuPont, William H; Caldwell, Lydia K; Hardesty, Vincent H; Barnhart, Emily C; Beeler, Matthew K; Post, Emily M; Volek, Jeff S; Kraemer, William J

    2018-01-01

    The effect of GINST15, an enzyme fermented ginseng supplement, on hormonal and inflammatory responses to physical stress in humans is unknown. The purpose of this investigation was to examine the constitutive and stress-induced effects of GINST15 supplement on hypo-pituitary-adrenal (HPA) and antioxidant activity in addition to muscle damage. Ten women (age: 38.7 ± 7.8 years; height: 163.81 ± 4.4 cm; body mass 76.0 ± 11.6 kg) and nine men (age: 41.2. ± 9.7 years; height: 177.4 ± 5.3 cm; body mass: 88.5 ± 5.0 kg) participated in a double-blinded, placebo-controlled, counterbalanced within-group study. Participants completed three 14-day treatment cycles with different doses (high: 960 mg; low: 160 mg; placebo: 0 mg) separated by a 1-week washout period. At the end of treatment, physical stress was imposed with intense resistance exercise work stress. Participants provided blood at rest and various time points after exercise (immediately [IP], 30 min [30], 60 min [60], 24 h [+24HR]). Cortisol (CORT), superoxide dismutase (SOD), total glutathione, nonspecific antioxidant activity, total antioxidant power (TAP), and creatine kinase were measured. GINST15 supplementation produced stress-inducible dose-dependent reductions in circulating cortisol and increased enzymatic and nonspecific antioxidant activity. Twenty-four hours after intense exercise, a high dose GINST15, a bioactive ginsenoside metabolite, significantly reduces muscle damage and HPA responses to physical stress in humans; these effects may result from increased antioxidant expression.

  9. Clinical validity of a relocation stress scale for the families of patients transferred from intensive care units.

    Science.gov (United States)

    Oh, HyunSoo; Lee, Seul; Kim, JiSun; Lee, EunJu; Min, HyoNam; Cho, OkJa; Seo, WhaSook

    2015-07-01

    This study was conducted to develop a family relocation stress scale by modifying the Son's Relocation Stress Syndrome Scale, to examine its clinical validity and reliability and to confirm its suitability for measuring family relocation stress. The transfer of ICU patients to general wards is a significant anxiety-producing event for family members. However, no relocation stress scale has been developed specifically for families. A nonexperimental, correlation design was adopted. The study subjects were 95 family members of 95 ICU patients at a university hospital located in Incheon, South Korea. Face and construct validities of the devised family relocation stress scale were examined. Construct validity was examined using factor analysis and by using a nomological validity test. Reliability was also examined. Face and content validity of the scale were verified by confirming that its items adequately measured family relocation stress. Factor analysis yielded four components, and the total variance explained by these four components was 63·0%, which is acceptable. Nomological validity was well supported by significant relationships between relocation stress and degree of preparation for relocation, patient self-care ability, family burden and satisfaction with the relocation process. The devised scale was also found to have good reliability. The family relocation stress scale devised in this study was found to have good validity and reliability, and thus, is believed to offer a means of assessing family relocation stress. The findings of this study provide a reliable and valid assessment tool when nurses prepare families for patient transfer from an ICU to a ward setting, and may also provide useful information to those developing an intervention programme for family relocation stress management. © 2015 John Wiley & Sons Ltd.

  10. Stress Corrosion Cracking of Ni-base Alloys in Sulfur Containing Solutions at 340 .deg. C

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eun Hee; Hwang, Seong Sik; Kim, Dong Jin; Kim, Sung Woo [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    Sulfur has been identified as one of the major impurities introduced into the secondary water of pressurized water-reactors (PWRs). Sulfur can originate from various sources, such as resin sources, feed water, cooling water in-leakage, and condenser leaks. Many authors have investigated effects of reduced sulfur in a wide pH range with or without additives. The presence of reduced sulfur species on the surfaces of pulled tubes having stress corrosion cracking (SCC) was also identified. In present work, SCC tests were conducted to investigate effects of reduced sulfur species on the SCC behavior of Ni-base Alloys. The Alloy 690 TT showed the most SCC resistant, regardless of the sulfur species. The Cr content and heat treatments of alloys appeared the increase in the SCC resistance.

  11. Fundamental solutions in piezoelectricity. Penny-shaped crack solution

    International Nuclear Information System (INIS)

    Dyka, Ewa; Rogowski, Bogdan

    2006-01-01

    The problem of electroelasticity for piezoelectric materials is considered. For axially symmetric states three potentials are introduced, which determine the displacements, the electric potentials, the stresses, the components of the electric field vector and the electric displacements in a piezoelectric body. These fundamental solutions are utilized to solve the penny-shaped crack problem. Two cases of boundary-value problems are considered, namely the permeable and impermeable crack boundary conditions. Exact solutions are obtained for elastic and electric fields. The main results are the stress intensity factor for singular stress and the electric displacement intensity factor. The numerical results are presented graphically to show the influence of applied mechanical and electrical loading on the analyzed quantities and to clarify the effect of anisotropy of piezoelectric materials. It is show that the influence of anisotropy of the materials on these fields is significant

  12. Stress

    Science.gov (United States)

    ... taking care of an aging parent. With mental stress, the body pumps out hormones to no avail. Neither fighting ... with type 1 diabetes. This difference makes sense. Stress blocks the body from releasing insulin in people with type 2 ...

  13. Constitutive analysis to predict the hot deformation behavior of 34CrMo4 steel with an optimum solution method for stress multiplier

    International Nuclear Information System (INIS)

    Xu, Wujiao; Zou, Mingping; Zhang, Lei

    2014-01-01

    The hot deformation behaviors of steel 34CrMo4 is investigated by hot compression test with the temperature range of 1073–1373 K and the strain rate range of 0.01–10 s −1 . The flow behaviors of 34CrMo4 steel were characterized based on the true stress–true strain curves. The hyperbolic sine law in Arrhenius type is adopted in the constitutive modeling for 34CrMo4. Solving algorithm of the stress multiplier α in hyperbolic sine law is a key factor to guarantee the constitutive model accuracy. How to solve the stress multiplier α is investigated and an optimum solution method for α is proposed. Meanwhile, the influence of strain is incorporated in constitutive analysis by considering the effect of strain on material constants α, n, Q and A. With the optimum solution method for stress multiplier α proposed, the stress prediction is satisfactory with the higher correlation coefficient, R = 0.988 and the lower average absolute relative error, AARE = 3.44% for the entire strain rate-temperature domain. The optimum solution method for stress multiplier α can also be applied for other materials to predict the flow behavior more accurately. - Highlights: • Isothermal compression tests were conducted to study the flow behavior of 34CrMo4. • The influence of strain is incorporated in constitutive model. • An optimum solution method for stress multiplier α is proposed

  14. Analytical solution of the thermo-mechanical stresses in a multilayered composite pressure vessel considering the influence of the closed ends

    International Nuclear Information System (INIS)

    Zhang, Q.; Wang, Z.W.; Tang, C.Y.; Hu, D.P.; Liu, P.Q.; Xia, L.Z.

    2012-01-01

    Limited work has been reported on determining the thermo-mechanical stresses in a multilayered composite pressure vessel when the influence of its closed ends is considered. In this study, an analytical solution was derived for determining the stress distribution of a multilayered composite pressure vessel subjected to an internal fluid pressure and a thermal load, based on thermo-elasticity theory. In the solution, a pseudo extrusion pressure was proposed to emulate the effect of the closed ends of the pressure vessel. To validate the analytical solution, the stress distribution of the pressure vessel was also computed using finite element (FE) method. It was found that the analytical results were in good agreement with the computational ones, and the effect of thermal load on the stress distribution was discussed in detail. The proposed analytical solution provides an exact means to design multilayered composite pressure vessels. Highlights: ► The thermal-mechanical stress was derived for a multilayered pressure vessel. ► A new pseudo extrusion pressure was proposed to emulate the effect of closed ends. ► The analytical results are in good agreement with the computational ones using FEM. ► The solution provides an exact way to design the multilayered pressure vessel.

  15. Hypertonic saline solution reduces the oxidative stress responses in traumatic brain injury patients

    Directory of Open Access Journals (Sweden)

    Mojtaba Mojtahedzadeh

    2014-01-01

    Full Text Available Background: Oxidative stress processes play an important role in the pathogenesis of secondary brain injury after traumatic brain injury (TBI. Hypertonic saline (HTS has advantages as being preferred osmotic agent, but few studies investigated oxidant and antioxidant effects of HTS in TBI. This study was designed to compare two different regimens of HTS 5% with mannitol on TBI-induced oxidative stress. Materials and Methods: Thirty-three adult patients with TBI were recruited and have randomly received one of the three protocols: 125 cc of HTS 5% every 6 h as bolus, 500 cc of HTS 5%as infusion for 24 h or 1 g/kg mannitol of 20% as a bolus, repeated with a dose of 0.25-0.5 g/kg every 6 h based on patient′s response for 3 days. Serum total antioxidant power (TAP, reactive oxygen species (ROS and nitric oxide (NO were measured at baseline and daily for 3 days. Results: Initial serum ROS and NO levels in patients were higher than control(6.86± [3.2] vs. 1.57± [0.5] picoM, P = 0.001, 14.6± [1.6] vs. 7.8± [3.9] mM, P = 0.001, respectively. Levels of ROS have decreased for all patients, but reduction was significantly after HTS infusion and mannitol (3. 08 [±3.1] to 1.07 [±1.6], P = 0.001, 5.6 [±3.4] to 2.5 [±1.8], P = 0.003 respectively. During study, NO levels significantly decreased in HTS infusion but significantly increased in mannitol. TAP Levels had decreased in all patients during study especially in mannitol (P = 0.004. Conclusion: Hypertonic saline 5% has significant effects on the oxidant responses compared to mannitol following TBI that makes HTS as a perfect therapeutic intervention for reducing unfavorable outcomes in TBI patients.

  16. Regular moderate or intense exercise prevents depression-like behavior without change of hippocampal tryptophan content in chronically tryptophan-deficient and stressed mice.

    Directory of Open Access Journals (Sweden)

    Hosung Lee

    Full Text Available Regular exercise has an antidepressant effect in human subjects. Studies using animals have suggested that the antidepressant effect of exercise is attributable to an increase of brain 5-hydroxytryptamine (5-HT; however, the precise mechanism underlying the antidepressant action via exercise is unclear. In contrast, the effect of 5-HT on antidepressant activity has not been clarified, in part because the therapeutic response to antidepressant drugs has a time lag in spite of the rapid increase of brain 5-HT upon administration of these drugs. This study was designed to investigate the contribution of brain 5-HT to the antidepressant effect of exercise. Mice were fed a tryptophan-deficient diet and stressed using chronic unpredictable stress (CUS for 4 weeks with or without the performance of either moderate or intense exercise on a treadmill 3 days per week. The findings demonstrated that the onset of depression-like behavior is attributable not to chronic reduction of 5-HT but to chronic stress. Regular exercise, whether moderate or intense, prevents depression-like behavior with an improvement of adult hippocampal cell proliferation and survival and without the recovery of 5-HT. Concomitantly, the mice that exercised showed increased hippocampal noradrenaline. Regular exercise prevents the impairment of not long-term memory but short-term memory in a 5-HT-reduced state. Together, these findings suggest that: (1 chronic reduction of brain 5-HT may not contribute to the onset of depression-like behavior; (2 regular exercise, whether moderate or intense, prevents the onset of chronic stress-induced depression-like behavior independent of brain 5-HT and dependent on brain adrenaline; and (3 regular exercise prevents chronic tryptophan reduction-induced impairment of not long-term but short-term memory.

  17. Effect of water content on the stress corrosion cracking susceptibility of Zircaloy-4 in iodine-alcoholic solutions

    International Nuclear Information System (INIS)

    Gomez Sanchez, Andrea; Farina, Silvia B.; Duffo, Gustavo S.

    2005-01-01

    The stress corrosion cracking (SCC) susceptibility of Zircaloy-4 (UNS R60804) was studied in 10 g/L iodine dissolved in various alcohols: methanol, ethanol, 1 propanol, 1-butanol, 1-pentanol and 1-octanol. SCC was observed in all the systems studied and it was found that the higher the size of alcohol molecule, the lower the SCC susceptibility. The existence of intergranular attack -controlled by the diffusion of the active species- is a condition for the SCC process to occur. In the present work the inhibiting effect of water on the SCC susceptibility of Zircaloy-4 in iodine-alcoholic solutions was also investigated and the results showed that the minimum water content to inhibit the SCC process depends on the type of alcohol used as a solvent. (author) [es

  18. Predictors of posttraumatic stress and quality of life in family members of chronically critically ill patients after intensive care.

    Science.gov (United States)

    Wintermann, Gloria-Beatrice; Weidner, Kerstin; Strauß, Bernhard; Rosendahl, Jenny; Petrowski, Katja

    2016-12-01

    Prolonged mechanical ventilation for acute medical conditions increases the risk of chronic critical illness (CCI). Close family members are confronted with the life-threatening condition of the CCI patients and are prone to develop posttraumatic stress disorder affecting their health-related quality of life (HRQL). Main aim of the present study was to investigate patient- and family-related risk factors for posttraumatic stress and decreased HRQL in family members of CCI patients. In a cross-sectional design nested within a prospective longitudinal cohort study, posttraumatic stress symptoms and quality of life were assessed in family members of CCI patients (n = 83, aged between 18 and 72 years) up to 6 months after transfer from ICU at acute care hospital to post-acute rehabilitation. Patients admitted a large rehabilitation hospital for ventilator weaning. The Posttraumatic Stress Scale-10 and the Euro-Quality of life-5D-3L were applied in both patients and their family members via telephone interview. A significant proportion of CCI patients and their family members (14.5 and 15.7 %, respectively) showed clinically relevant scores of posttraumatic stress. Both CCI patients and family members reported poorer HRQL than a normative sample. Factors independently associated with posttraumatic stress in family members were the time following ICU discharge (β = .256, 95 % confidence interval .053-.470) and the patients' diagnosis of PTSD (β = .264, 95 % confidence interval .045-.453). Perceived satisfaction with the relationship turned out to be a protective factor for posttraumatic stress in family members of CCI patients (β = -.231, 95 % confidence interval -.423 to -.015). Regarding HRQL in family members, patients' acute posttraumatic stress at ICU (β = -.290, 95 % confidence interval -.360 to -.088) and their own posttraumatic stress 3 to 6 months post-transfer (β = -.622, 95 % confidence interval -.640 to -.358) turned out to be

  19. Fission products determination in high activity waste solution by wavelength dispersive X-ray fluorescence spectral interference correction by intensity ratio

    International Nuclear Information System (INIS)

    Sato, I.M.

    1988-01-01

    Fission products Se, Rb, Y, Zr, Mo, Ru, Rh, Pd, Te, Cd, Cs, Ba, La, Ce, Pr, Nd, Sm, Eu and Gd were determined in simulated high activity radioactive waste solution by wavelength dispersive X-ray fluorescence spectrometry without chemical separation. Thin layer technique was employed for the sample preparation. For the L spectral lines, the absorption effect was verified by Rasberry-Heinrich, Lucas Tooth-Pyne and Lachance-Trail relations. This effect was quantified and corrected accordingly. The spectral interferences of Kα and/or Lα lines of Y, Zr, Mo, La, Ce, Pr, Nd, Sm, Eu and Gd elements were eliminated by the intensity ratio method. The overlapping of up to three analytical lines was corrected by applying this method. The concentration influence of the interfering element on the intensity ratio values as well the efficiency of the correction method were investigated in order to assure that no systematic or residual error, resulting from the correction, affect the actual fluorescent intensity determination. The results is compared with the data obtained from measurements of free lines of spectral interference and also with those obtained by the linear equation system. Fission products determination presented a precision in the range of 0.1 to 5.0% and an accuracy of up to ± 7.0% the results are compared with those obtained by neutron activation analysis and inductively coupled plasma - atomic emission spectrometry. Leaching data, when radioactive waste is incorporated in cement matrix, were attempted by X-ray fluorescence technique. For two years leaching period, leaching rate and diffusion coefficient data of cesium were determined. The results obtained agree with those obtained by γ-spectromety. (author) [pt

  20. Electrochemical and stress corrosion cracking behaviour of titanium in n-propanol and iso-propanol solutions

    International Nuclear Information System (INIS)

    Trasatti, S.P.; Sivieri, E.

    2004-01-01

    Titanium shows severe localised corrosion in non-aqueous media in the presence of applied stress and crevice. The present work brings a contribution to the behaviour of Ti in non-aqueous media by studying the role of water on the electrochemical properties and stress corrosion cracking (SCC) sensitivity of Ti in n-propanol and iso-propanol solutions. The anodic behaviour of titanium in n-propanol-H 2 O and iso-propanol-H 2 O systems is quite similar to that observed in methanol-H 2 O and ethanol-H 2 O systems. The minimum water content needed for the passive film to be stable is 2% for n-propanol and 0.1% for iso-propanol. In methanol and ethanol it is 20 and 8%, respectively. The minimum water content decreases as the number of carbon atoms increases and the lowest water content in iso-propanol is strictly related to the capability of the alcohol to dehydrate. The possibility of predicting by means of polarisation curves the conditions of occurrence of SCC of titanium has been confirmed by simply analysing when corrosion potential is higher than breakdown potential

  1. Hepatoprotective Effect of Quercetin on Endoplasmic Reticulum Stress and Inflammation after Intense Exercise in Mice through Phosphoinositide 3-Kinase and Nuclear Factor-Kappa B

    Directory of Open Access Journals (Sweden)

    Yuhan Tang

    2016-01-01

    Full Text Available The mechanisms underlying intense exercise-induced liver damage and its potential treatments remain unclear. We explored the hepatoprotection and mechanisms of quercetin, a naturally occurring flavonoid, in strenuous exercise-derived endoplasmic reticulum stress (ERS and inflammation. Intense exercise (28 m/min at a 5° slope for 90 min resulted in the leakage of aminotransferases in the BALB/C mice. The hepatic ultrastructural malformations and oxidative stress levels were attenuated by quercetin (100 mg/kg·bw. Intense exercise and thapsigargin- (Tg- induced ERS (glucose-regulated protein 78, GRP78 and inflammatory cytokines levels (IL-6 and TNF-α were decreased with quercetin. Furthermore, quercetin resulted in phosphoinositide 3-kinase (PI3K induction, Ca2+ restoration, and blockade of the activities of Jun N-terminal kinase (JNK, activating transcription factor 6 (ATF6 and especially NF-κB (p65 and p50 nuclear translocation. A PI3K inhibitor abrogated the protection of quercetin on ERS and inflammation of mouse hepatocytes. SP600125 (JNK inhibitor, AEBSF (ATF6 inhibitor, and especially PDTC (NF-κB inhibitor enhanced the quercetin-induced protection against Tg stimulation. Collectively, intense exercise-induced ERS and inflammation were attenuated by quercetin. PI3K/Akt activation and JNK, ATF6, and especially NF-κB suppression were involved in the protection. Our results highlight a novel preventive strategy for treating ERS and inflammation-mediated liver damage induced by intense exercise using natural phytochemicals.

  2. The Effects of Emotional Intelligence (EI Items Education on Job Related Stress in Physicians and Nurses who Work in Intensive Care Units

    Directory of Open Access Journals (Sweden)

    Kh Nooryan

    2011-12-01

    Full Text Available Background & Aim: Intensive care units (ICUs are recognized as stressful environments. The objective of this study was to determine the effects of emotional intelligence education items on job related stress on physicians and nurses who work in intensive care units at hospitals of Yerevan, Armenia. Methods: A interventional study design was implemented with 106 registered hospital physicians and nurses, who were widely distributed all the way through. Case group was taught about 15 E.I items. For data collection, the 20-question Berger situational (overt anxiety questionnaire, the 20-item personality (covert anxiety questionnaire, and the Bar-on emotional intelligence questionnaire with 133 questions were used. Statistical descriptive methods, chi-square (X2 and t-tests were used to analyze data. Results: The research achievements revealed that the average score of the case group`s situational anxiety was 46.59 before intervention, which decreased to 39.95 after the training of the items of emotional intelligence. The average score of situational anxiety of control group was 44.32 before intervention which increased to 44.76 after examination. There was a meaningful statistical difference between case and control group after education of emotional intelligence`s items (p=0.001. Conclusion: Results of the current study showed that physicians and nurses experience high level of stress. The ability to effectively deal with emotion intelligence and emotional information in the workplace assists employees in coping with occupational stress and should be developed in stress managing trainings.

  3. Fatigue threshold studies in Fe, Fe-Si, and HSLA steel: Part II. thermally activated behavior of the effective stress intensity at threshold

    Science.gov (United States)

    Yu, W.; Esaklul, K.; Gerberich, W. W.

    1984-05-01

    It is shown that closure mechanisms alone cannot fully explain increasing fatigue thresholds with decreasing test temperature for a sequence of Fe-Si binary alloys and an HSLA steel. Implications are that fatigue crack propagation near threshold is a thermally activated process. The effective threshold stress intensity, which was obtained by subtracting the closure portion from the fatigue threshold, was examined. This effective stress intensity was found to correlate very well to the thermal component of the flow stress. A detailed fractographic study of the fatigue surface was performed. Water vapor in the room air was found to promote the formation of oxide and intergranular crack growth. At lower temperature, a brittle-type cyclic cleavage fatigue surface was observed but the ductile process persisted even at 123 K. Arrest marks were found on all three modes of fatigue crack growth. The regular spacings between these lines and dislocation modeling suggested that fatigue crack growth was controlled by the subcell structure near threshold. A model based on the slip-off of dislocations was examined. From this, it is shown that the effective fatigue threshold may be related to the square root of (one plus the strain rate sensitivity).

  4. Local topology via the invariants of the velocity gradient tensor within vortex clusters and intense Reynolds stress structures in turbulent channel flow

    International Nuclear Information System (INIS)

    Buchner, Abel-John; Kitsios, Vassili; Atkinson, Callum; Soria, Julio; Lozano-Durán, Adrián

    2016-01-01

    Previous works have shown that momentum transfer in the wall–normal direction within turbulent wall–bounded flows occurs primarily within coherent structures defined by regions of intense Reynolds stress [1]. Such structures may be classified into wall–attached and wall–detached structures with the latter being typically weak, small–scale, and isotropically oriented, while the former are larger and carry most of the Reynolds stresses. The mean velocity fluctuation within each structure may also be used to separate structures by their dynamic properties. This study aims to extract information regarding the scales, kinematics and dynamics of these structures within the topological framework of the invariants of the velocity gradient tensor (VGT). The local topological characteristics of these intense Reynolds stress structures are compared to the topological characteristics of vortex clusters defined by the discriminant of the velocity gradient tensor. The alignment of vorticity with the principal strain directions within these structures is also determined, and the implications of these findings are discussed. (paper)

  5. Avaliação do Nível de Estresse da Equipe de Enfermagem em Terapia Intensiva/Evaluation of Stress Level Team Nursing in Intensive Care

    Directory of Open Access Journals (Sweden)

    Patrícia Costa dos Santos da Silva

    2012-12-01

    Full Text Available Objetivo: Avaliar o nível de estresse da equipe de enfermagem que atua em Terapia Intensiva, em um Hospital Universitário do Sul de Minas Gerais. Materiais e Métodos: Trata-se de um estudo descritivo, transversal, de abordagem quantitativa, aprovado pelo Comitê de Ética sob o Parecer nº 48/2011, desenvolvido em uma Unidade de Terapia Intensiva.A amostra constituiu-se de 20 profissionais de enfermagem. Para coleta de dados utilizou-se um questionário com questões semi-estruturadas e o Inventário de Sintomas de Stress para adultos de Lipp. Resultados: Verificou-se que a maioria dos sujeitos encontra-se na faixa etária de 20 a 30 anos (50%. Diante das situações de estresse, notou-se que 55% dos profissionais encontram-se na fase de resistência. A equipe considerou muito desgastante o relacionamento com outras unidades e supervisores (15%, a previsão e reposição de materiais (25%, assistência de enfermagem (10% e as condições de trabalho (10%. Conclusão: O estudo demonstra que a maioria dos profissionais de enfermagem atuante em terapia intensiva, apresenta sinais e sintomas de estresse, principalmente, na fase de resistência. Objective: To evaluate the stress level of the nursing team that works in the Intensive Care Unit in a School Hospital in southern Minas Gerais. Materials and Methods: This is a descriptive transversal study with a quantitative approach, approved by the Ethics Committee under the Opinion n. 48/2011, developed in an intensive care unit. The sample was consisted of 20 nurses. For data collection a questionnaire with semi-structured questions andthe Symptoms of Stress Inventory for adults Lipp was used . Results: It has beenfound that most subjects are aged 20 to 30 years (50%. In the face of stressful situations, it was noted that 55% of professionals are at the stage of resistance. The team considered to be very stressful the relationship with other units and supervisors (15%, forecasting and replenishment

  6. A New Unified Solution for Circular Tunnel Based on a Four-Stage Constitutive Model considering the Intermediate Principal Stress

    Directory of Open Access Journals (Sweden)

    Liang Chen

    2018-01-01

    Full Text Available Based on the triaxial test, the elasto-perfectly plastic strain-softening damage model (EPSDM is proposed as a new four-stage constitutive model. Compared with traditional models, such as the elasto-brittle-plastic model (EBM, elasto-strain-softening model (ESM, elasto-perfectly plastic model (EPM, and elasto-peak plastic-brittle plastic model (EPBM, this model incorporates both the plastic bearing capacity and strain-softening characteristics of rock mass. Moreover, a new closed-form solution of the circular tunnel is presented for the stress and displacement distribution, and a plastic shear strain increment is introduced to define the critical condition where the strain-softening zone begins to occur. The new analysis solution obtained in this paper is a series of results rather than one specific solution; hence, it is suitable for a wide range of rock masses and engineering structures. The numerical simulation has been used to verify the correctness of the EPSDM. The parametric studies are also conducted to investigate the effects of supporting resistance, residual cohesion, dilation angle, strain-softening coefficient, plastic shear strain increment, and yield parameter on the result. It is shown that when the supporting resistance is fully released, both the post-peak failure radii and surface displacement could be summarized as EBM > EPBM > ESM > EPSDM > EPM; the dilation angle in the damage zone had the highest influence on the surface displacement, whereas the dilation angle in the perfectly plastic zone had the lowest influence; the strain-softening coefficient had the most significant effect on the damage zone radii; the EPSDM is recommended as the optimum model for support design and stability evaluation of the circular tunnel excavated in the perfectly plastic strain-softening rock mass.

  7. Pipe cracking due to thermal stresses produced by valve opening

    International Nuclear Information System (INIS)

    Sanchez Sarmiento, G.

    1982-01-01

    The thermal stresses produced in a tube whose internal surface is abrupt cooled during a valve opening so that the water volume increases linearly with time are studied. A general solution for these stresses and its stress intensity factors in terms of non-dimensional parameters is presented. (E.G.) [pt

  8. Evidence of Complex Posttraumatic Stress Disorder (CPTSD) across populations with prolonged trauma of varying intensity and ages of exposure

    DEFF Research Database (Denmark)

    Palic, Sabina; Zerach, G; Shevlin, Mark

    2016-01-01

    , with a "Dissociative PTSD-subtype" class. ICD-11's CPTSD was not exclusively associated with childhood abuse, but also with exposure to adulthood trauma of severe interpersonal intensity. Furthermore, all types of prolonged trauma were equally associated with the "Anxiety symptoms" class. Finally, of all the classes......The ICD-11 proposes different types of prolonged trauma as risk factors for complex PTSD (CPTSD). However, CPTSD's construct validity has only been examined in childhood abuse, and single trauma exposure samples. Thus, the extent to which CPTSD applies to other repeatedly traumatized populations...... is unknown. This study examined ICD-11's PTSD and CPTSD across populations with prolonged trauma of varying interpersonal intensity and ages of exposure, including: 1) childhood sexual abuse, 2) adulthood trauma of severe interpersonal intensity (refugees and ex-prisoners of war), and 3) adulthood trauma...

  9. Enhanced biofuel production potential with nutritional stress amelioration through optimization of carbon source and light intensity in Scenedesmus sp. CCNM 1077.

    Science.gov (United States)

    Pancha, Imran; Chokshi, Kaumeel; Mishra, Sandhya

    2015-03-01

    Microalgal mixotrophic cultivation is one of the most potential ways to enhance biomass and biofuel production. In the present study, first of all ability of microalgae Scenedesmus sp. CCNM 1077 to utilize various carbon sources under mixotrophic growth condition was evaluated followed by optimization of glucose concentration and light intensity to obtain higher biomass, lipid and carbohydrate contents. Under optimized condition i.e. 4 g/L glucose and 150 μmol m(-2) s(-1) light intensity, Scenedesmus sp. CCNM 1077 produced 1.2g/L dry cell weight containing 23.62% total lipid and 42.68% carbohydrate. Addition of glucose shown nutritional stress ameliorating effects and around 70% carbohydrate and 25% total lipid content was found with only 21% reduction in dry cell weight under nitrogen starved condition. This study shows potential application of mixotrophically grown Scenedesmus sp. CCNM 1077 for bioethanol and biodiesel production feed stock. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. Fatigue threshold studies in Fe, Fe-Si, and HSLA steel: Part II. Thermally activated behavior of the effective stress intensity at threshold

    International Nuclear Information System (INIS)

    Yu, W.; Esaklul, K.; Gerberich, W.W.

    1984-01-01

    It is shown that closure mechanisms alone cannot fully explain increasing fatigue thresholds with decreasing test temperature. Implications are that fatigue crack propagation near threshold is a thermally activated process. The effective threshold stress intensity correlate to the thermal component of the flow stress. A fractographic study of the fatigue surface was performed. Water vapor in room air promotes the formation of oxide and intergranular crack growth. At lower temperatures, a brittle-type cyclic cleavage fatigue surface was observed but the ductile process persisted even at 123 K. Arrest marks found on all three modes of fatigue crack growth suggest that fatigue crack growth controlled by the subcell structure near threshold. The effective fatigue threshold may be related to the square root of (one plus the strain rate sensitivity)

  11. A Brief Cognitive-Behavioral Psycho-Education (B-CBE Program for Managing Stress and Anxiety of Main Family Caregivers of Patients in the Intensive Care Unit

    Directory of Open Access Journals (Sweden)

    Vico Chung Lim Chiang

    2016-09-01

    Full Text Available Having a loved one in the intensive care unit (ICU is a stressful event, which may cause a high level of anxiety to the family members. This could threaten their wellbeing and ability to support the patients in, or after discharge from, the ICU. To investigate the outcomes of a brief cognitive-behavioral psycho-education program (B-CBE to manage stress and anxiety of the main family caregivers (MFCs, a pragmatic quasi-experimental study involving 45 participants (treatment group: 24; control group: 21 was conducted in an ICU. The Depression and Anxiety Stress Scale and the Critical Care Family Need Inventory were used to evaluate the primary outcomes on stress and anxiety, and satisfaction with family needs. The treatment group reported significantly better improvement in the information satisfaction score compared to the control group (p < 0.05; η2 = 0.09. Overall main effects were observed on the stress (p < 0.01; η2 = 0.20, anxiety (p < 0.01; η2 = 0.18, depression (p < 0.05; η2 = 0.13, support satisfaction (p < 0.05; η2 = 0.13, and comfort satisfaction (p < 0.05; η2 = 0.11 scores. The experience of this study suggest that MFCs are in great need of additional support like B-CBE to manage their stress and anxiety. Given the brevity of B-CBE, it is practical for critical care nurses to deliver and MFCs to take within the industrious context of an ICU. More studies are needed to investigate these types of brief psychological interventions.

  12. Comparative analysis of salt stress, duration and intensity, on the chloroplast ultrastructure and photosynthetic apparatus in Thellungiella salsuginea.

    Science.gov (United States)

    Goussi, Rahma; Manaa, Arafet; Derbali, Walid; Cantamessa, Simone; Abdelly, Chedly; Barbato, Roberto

    2018-06-01

    Salinity is one of the most important abiotic stress affecting plant growth and productivity worldwide. Photosynthesis, together with cell growth, is among the primary process affected by salinity. Here, we report the effects of salt stress on photosynthesis in the model halophyte Thellungiella salsuginea. Plants were grown in hydroponic system and then treated for 2 weeks with different NaCl concentrations (0, 100, 200 and 400 mM). Leaf analysis using both photonic and transmission electron microscopes showed some changes in mesophyll cell organization, including shape and dimension. Under high NaCl concentration (400 mM) a swelling of thylakoids and starch accumulation was also observed. The obtained results also showed a change in the photosynthetic efficiency of both photosystems (PSI and PSII), depending on both NaCl concentrations and duration of the stress treatment. Under moderate salinity (100 and 200 mM NaCl) no significant variation was observed in PSI and PSII yield parameters. Chlorophyll a fluorescence transient showed some variations in OJ, JI and IP phases under salt stress depending also on NaCl levels and the duration of stress. Under high salinity PSII donor side was affected as well as quantum yield of PSI which also showed a donor side limitation. A significant decrease on quantum yields Y(I) and Y(II) under high salt treatment (400 mM NaCl) for prolonged period of time (15 days) was observed. The decrease of these parameters was quantitatively compensated by a corresponding increase of energy thermal dissipation Y(NPQ) in photosystem II and a increase in the Y(ND) in PSI. Analysis of derived parameters from the OJIP transient curve revealed that ABS/RC decreased under NaCl treatment by reason of the increase in size of antenna of active reaction centers. An increase in the performance index PI (ABS) , a slight decrease in the rate of DI O /RC, TR O /RC and the level of electron transport per PSII RC (ET O /RC) were observed during

  13. Influence of the crack propagation rate in the obtaining opening and closing stress intensity factor by finite element method

    OpenAIRE

    Luiz Carlos H. Ricardo; Carlos Alexandre J. Miranda

    2016-01-01

    Crack propagation simulation began with the development of the finite element method; the analyses were conducted to obtain a basic understanding of the crack growth. Today structural and materials engineers develop structures and materials properties using this technique as criterion design. The aim of this paper is to verify the effect of different crack propagation rates in determination of crack opening and closing stress of an ASTM specimen under a standard suspension spectrum loading fr...

  14. Stress-induced brain histone H3 phosphorylation: contribution of the intensity of stressors and length of exposure.

    Science.gov (United States)

    Rotllant, David; Pastor-Ciurana, Jordi; Armario, Antonio

    2013-05-01

    Expression of c-fos is used for the characterization of brain areas activated by stressors. Recently, some epigenetic markers associated with enhanced transcription have been identified that may be also useful to detect neuronal populations important for the processing of stressors: phosphorylation of histone H3 in serine 10 or 28 (pH3S₁₀ or pH3S₂₈). Then, we compared in rats the response to stress of c-fos and these epigenetic changes. More specifically, we studied the influence of the type of stressor (novel environment vs. immobilization, IMO) and the dynamics of the response to IMO. Stress increased pH3S₁₀ positive neurons, with a more restricted pattern than that of c-fos, both in terms of brain areas activated and number of positive neurons. Changes in pH3S₁₀ showed a maximum at 30 min, then progressively declining in most areas in spite of the persistence of IMO. Moreover, the decline was in general more sensitive than c-fos to the termination of IMO. The pattern of pH3S₂₈ was even more restricted that of pH3S₁₀, but they showed co-localization. The present data demonstrate a more selective pattern of stress-induced histone H3 phosphorylation than c-fos. The factors determining such a selectivity and its biological meaning remain to be studied. © 2013 International Society for Neurochemistry.

  15. [The combined action of drinking mineral water and low-intensity electromagnetic radiation under the immobilization stress conditions (an experimental study)].

    Science.gov (United States)

    Korolev, Yu N; Bobrovnitsky, I P; Geniatulina, M S; Mikhailik, L V; Nikulina, L A; Bobkova, A S; Yakovlev, M Yu

    2015-01-01

    The present study carried out on white male rats in experiments with the use of biochemical, radioimmunological, and electron- microscopic methods. It was shown that the combined treatment with potable mineral water (MV) and low-intensity electromagnetic radiation (LIEMR) of ultrahigh frequency (power density less than 1 pW/cm2, the frequency about 1000 MHz) facilitated the activation of metabolic and intracellular regenerative processes in the liver and testes. One of the advantages of the combined application of MV and LIEMR over the single-factor treatment manifested itself as the weakening of stress reactions, the increase in the frequency of the plastic processes, and the more harmonious development of different forms of intracellular regeneration. The results of the study provide a deeper insight ino the mechanisms underlying the combined actions of drinking mineral water and low-intensity electromagnetic radiation; also, they justify the application of these factors for the protection of the reproductive system and the entire body from stress-induced disorders.

  16. Application of A Physiological Strain Index in Evaluating Responses to Exercise Stress – A Comparison Between Endurance and High Intensity Intermittent Trained Athletes

    Directory of Open Access Journals (Sweden)

    Pokora Ilona

    2016-04-01

    Full Text Available The study evaluated differences in response to exercise stress between endurance and high-intensity intermittent trained athletes in a thermoneutral environment using a physiological strain index (PSI. Thirty-two subjects participated in a running exercise under normal (23°C, 50% RH conditions. The group included nine endurance trained athletes (middle-distance runners - MD, twelve high-intensity intermittent trained athletes (soccer players - HIIT and eleven students who constituted a control group. The exercise started at a speed of 4 km·h–1 which was increased every 3 min by 2 km·h–1 to volitional exhaustion. The heart rate was recorded with a heart rate monitor and aural canal temperature was measured using an aural canal temperature probe. The physiological strain index (PSI and the contribution of the circulatory and thermal components to the overall physiological strain were calculated from the heart rate and aural canal temperature. The physiological strain index differed between the study and control participants, but not between the MD and HIIT groups. The physiological strain in response to exercise stress in a thermoneutral environment was mainly determined based on the circulatory strain (MD group - 73%, HIIT group – 70%. The contribution of the circulatory and thermal components to the physiological strain did not differ significantly between the trained groups (MD and HIIT despite important differences in morphological characteristics and training-induced systemic cardiovascular and thermoregulatory adaptations.

  17. Increased objectively assessed vigorous-intensity exercise is associated with reduced stress, increased mental health and good objective and subjective sleep in young adults.

    Science.gov (United States)

    Gerber, Markus; Brand, Serge; Herrmann, Christian; Colledge, Flora; Holsboer-Trachsler, Edith; Pühse, Uwe

    2014-08-01

    The role of physical activity as a factor that protects against stress-related mental disorders is well documented. Nevertheless, there is still a dearth of research using objective measures of physical activity. The present study examines whether objectively assessed vigorous physical activity (VPA) is associated with mental health benefits beyond moderate physical activity (MPA). Particularly, this study examines whether young adults who accomplish the American College of Sports Medicine's (ACSM) vigorous-intensity exercise recommendations differ from peers below these standards with regard to their level of perceived stress, depressive symptoms, perceived pain, and subjective and objective sleep. A total of 42 undergraduate students (22 women, 20 men; M=21.24years, SD=2.20) volunteered to take part in the study. Stress, pain, depressive symptoms, and subjective sleep were assessed via questionnaire, objective sleep via sleep-EEG assessment, and VPA via actigraphy. Meeting VPA recommendations had mental health benefits beyond MPA. VPA was associated with less stress, pain, subjective sleep complaints and depressive symptoms. Moreover, vigorous exercisers had more favorable objective sleep pattern. Especially, they had increased total sleep time, more stage 4 and REM sleep, more slow wave sleep and a lower percentage of light sleep. Vigorous exercisers also reported fewer mental health problems if exposed to high stress. This study provides evidence that meeting the VPA standards of the ACSM is associated with improved mental health and more successful coping among young people, even compared to those who are meeting or exceeding the requirements for MPA. Copyright © 2014 Elsevier Inc. All rights reserved.

  18. Influence of bovine serum albumin in Hanks' solution on the corrosion and stress corrosion cracking of a magnesium alloy.

    Science.gov (United States)

    Harandi, Shervin Eslami; Banerjee, Parama Chakraborty; Easton, Christopher D; Singh Raman, R K

    2017-11-01

    It is essential for any temporary implant to possess adequate strength to maintain their mechanical integrity under the synergistic effects of mechanical loading characteristics of human body and the corrosive physiological environment. Such synergistic effects can cause stress corrosion cracking (SCC). The aim of the present study is to investigate the effect of the addition of bovine serum albumin (BSA) to Hanks' solution in corrosion and SCC susceptibility of AZ91D magnesium alloy. The electrochemical impedance spectroscopy (EIS) results indicated that the addition of BSA increased corrosion resistance of the alloy during the first 48h of immersion and then decreased it rapidly. The energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) analyses indicated adsorption of BSA on the alloy surface during initial hours of immersion. However, with the increasing immersion time, BSA chelated with the corrosion products causing disruption of the protective film; thus, it accelerated the corrosion of the alloy. Both the mechanical data and fractographic evidence have confirmed susceptibility of the alloy to SCC. However, in the presence of BSA, the alloy suffered greater SCC which was attributed to its increased susceptibility towards localized corrosion. Copyright © 2017. Published by Elsevier B.V.

  19. Stress

    DEFF Research Database (Denmark)

    Keller, Hanne Dauer

    2015-01-01

    Kapitlet handler om stress som følelse, og det trækker primært på de få kvalitative undersøgelser, der er lavet af stressforløb.......Kapitlet handler om stress som følelse, og det trækker primært på de få kvalitative undersøgelser, der er lavet af stressforløb....

  20. Stress !!!

    OpenAIRE

    Fledderus, M.

    2012-01-01

    Twee op de vijf UT-studenten hebben last van ernstige studiestress, zo erg zelfs dat het ze in hun privéleven belemmert. Die cijfers komen overeen met het landelijk beeld van stress onder studenten. Samen met 14 andere universiteits- en hogeschoolbladen enquêteerde UT Nieuws bijna 5500 studenten. Opvallend is dat mannelijke studenten uit Twente zich veel minder druk lijken te maken over hun studie. Onder vrouwen ligt de stress juist erg hoog ten opzichte van het landelijk gemiddelde.

  1. Effects of High-Intensity Swimming on Lung Inflammation and Oxidative Stress in a Murine Model of DEP-Induced Injury.

    Science.gov (United States)

    Ávila, Leonardo C M; Bruggemann, Thayse R; Bobinski, Franciane; da Silva, Morgana Duarte; Oliveira, Regiane Carvalho; Martins, Daniel Fernandes; Mazzardo-Martins, Leidiane; Duarte, Marta Maria Medeiros Frescura; de Souza, Luiz Felipe; Dafre, Alcir; Vieira, Rodolfo de Paula; Santos, Adair Roberto Soares; Bonorino, Kelly Cattelan; Hizume Kunzler, Deborah de C

    2015-01-01

    Studies have reported that exposure to diesel exhaust particles (DEPs) induces lung inflammation and increases oxidative stress, and both effects are susceptible to changes via regular aerobic exercise in rehabilitation programs. However, the effects of exercise on lungs exposed to DEP after the cessation of exercise are not clear. Therefore, the aim of this study was to evaluate the effects of high-intensity swimming on lung inflammation and oxidative stress in mice exposed to DEP concomitantly and after exercise cessation. Male Swiss mice were divided into 4 groups: Control (n = 12), Swimming (30 min/day) (n = 8), DEP (3 mg/mL-10 μL/mouse) (n = 9) and DEP+Swimming (n = 8). The high-intensity swimming was characterized by an increase in blood lactate levels greater than 1 mmoL/L between 10th and 30th minutes of exercise. Twenty-four hours after the final exposure to DEP, the anesthetized mice were euthanized, and we counted the number of total and differential inflammatory cells in the bronchoalveolar fluid (BALF), measured the lung homogenate levels of IL-1β, TNF-α, IL-6, INF-ϫ, IL-10, and IL-1ra using ELISA, and measured the levels of glutathione, non-protein thiols (GSH-t and NPSH) and the antioxidant enzymes catalase and glutathione peroxidase (GPx) in the lung. Swimming sessions decreased the number of total cells (pswimming groups compared with the control groups, as did the CAT lung levels (p = 0.0001). Simultaneously, swimming resulted in an increase in the GSH-t and NPSH lung levels in the DEP group (p = 0.0001 and pswimming sessions decreased the lung inflammation and oxidative stress status during DEP-induced lung inflammation in mice.

  2. A study on the mechanism of stress corrosion cracking of duplex stainless steels in hot alkaline-sulfide solution

    Science.gov (United States)

    Chasse, Kevin Robert

    Duplex stainless steels (DSS) generally have superior strength and corrosion resistance as compared to most standard austenitic and ferritic stainless grades owing to a balanced microstructure of austenite and ferrite. As a result of having favorable properties, DSS have been selected for the construction of equipment in pulp and paper, chemical processing, nuclear, oil and gas as well as other industries. The use of DSS has been restricted in some cases because of stress corrosion cracking (SCC), which can initiate and grow in either the ferrite or austenite phase depending on the environment. Thorough understanding of SCC mechanisms of DSS in chloride- and hydrogen sulfide-containing solutions has been useful for material selection in many environments. However, understanding of SCC mechanisms of DSS in sulfide-containing caustic solutions is limited, which has restricted the capacity to optimize process and equipment design in pulp and paper environments. Process environments may contain different concentrations of hydroxide, sulfide, and chloride, altering corrosion and SCC susceptibility of each phase. Crack initiation and growth behavior will also change depending on the relative phase distribution and properties of austenite and ferrite. The role of microstructure and environment on the SCC of standard grade UNS S32205 and lean grade UNS S32101 in hot alkaline-sulfide solution were evaluated in this work using electrochemical, film characterization, mechanical testing, X-ray diffraction, and microscopy techniques. Microstructural aspects, which included residual stress state, phase distribution, phase ratio, and microhardness, were related to the propensity for SCC crack initiation in different simulated alkaline pulping liquors at 170 °C. Other grades of DSS and reference austenitic and superferritic grades of stainless steel were studied using exposure coupons for comparison to understand compositional effects and individual phase susceptibility

  3. Stress intensity factor at the tip of cladding incipient crack in RIA-simulating experiments for high-burnup PWR fuels

    International Nuclear Information System (INIS)

    Udagawa, Yutaka; Suzuki, Motoe; Sugiyama, Tomoyuki; Fuketa, Toyoshi

    2009-01-01

    RIA-simulating experiments for high-burnup PWR fuels have been performed in the NSRR, and the stress intensity factor K 1 at the tip of cladding incipient crack has been evaluated in order to investigate its validity as a PCMI failure threshold under RIA conditions. An incipient crack depth was determined by observation of metallographs. The maximum hydride-rim thickness in the cladding of the test fuel rod was regarded as the incipient crack depth in each test case. Hoop stress in the cladding periphery during the pulse power transient was calculated by the RANNS code. K 1 was calculated based on crack depth and hoop stress. According to the RANNS calculation, PCMI failure cases can be divided into two groups: failure in the elastic phase and failure in the plastic phase. In the former case, elastic deformation was predominant around the incipient crack at failure time. K 1 is available only in this case. In the latter, plastic deformation was predominant around the incipient crack at failure time. Failure in the elastic phase never occurred when K 1 was less than 17 MPa m 1/2 . For failure in the plastic phase, the plastic hoop strain of the cladding periphery at failure time clearly showed a tendency to decrease with incipient crack depth. The combination of K 1 , for failure in the elastic phase, and plastic hoop strain at failure, for failure in the plastic phase, can be an effective index of PCMI failure under RIA conditions. (author)

  4. Early intra-intensive care unit psychological intervention promotes recovery from post traumatic stress disorders, anxiety and depression symptoms in critically ill patients.

    Science.gov (United States)

    Peris, Adriano; Bonizzoli, Manuela; Iozzelli, Dario; Migliaccio, Maria Luisa; Zagli, Giovanni; Bacchereti, Alberto; Debolini, Marta; Vannini, Elisetta; Solaro, Massimo; Balzi, Ilaria; Bendoni, Elisa; Bacchi, Ilaria; Trevisan, Monica; Giovannini, Valtere; Belloni, Laura

    2011-01-01

    Critically ill patients who require intensive care unit (ICU) treatment may experience psychological distress with increasing development of psychological disorders and related morbidity. Our aim was to determine whether intra-ICU clinical psychologist interventions decrease the prevalence of anxiety, depression and posttraumatic stress disorder (PTSD) after 12 months from ICU discharge. Our observational study included critical patients admitted before clinical psychologist intervention (control group) and patients who were involved in a clinical psychologist program (intervention group). The Hospital Anxiety and Depression Scale (HADS) and Impact of Event Scale-Revised questionnaires were used to assess the level of posttraumatic stress, anxiety and depression symptoms. The control and intervention groups showed similar demographic and clinical characteristics. Patients in the intervention group showed lower rates of anxiety (8.9% vs. 17.4%) and depression (6.5% vs. 12.8%) than the control group on the basis of HADS scores, even if the differences were not statistically significant. High risk for PTSD was significantly lower in patients receiving early clinical psychologist support than in the control group (21.1% vs. 57%; P < 0.0001). The percentage of patients who needed psychiatric medications at 12 months was significantly higher in the control group than in the patient group (41.7% vs. 8.1%; P < 0.0001). Our results suggest that that early intra-ICU clinical psychologist intervention may help critically ill trauma patients recover from this stressful experience.

  5. Demographic and occupational predictors of stress and fatigue in French intensive-care registered nurses and nurses' aides: a cross-sectional study.

    Science.gov (United States)

    Jones, Gabrielle; Hocine, Mounia; Salomon, Jérôme; Dab, William; Temime, Laura

    2015-01-01

    Healthcare workers (HCWs) working in intensive-care units (ICUs) are exposed to high physical and mental demands potentially affecting their health or having repercussions on patient care. Although several studies have explored the links between some aspects of working conditions in hospitals and HCW health, the complex dynamics at play are not fully understood. This study aimed to explore the impact of a wide array of demographic, employment and organizational factors related to fatigue and stress of French ICU HCWs. A cross-sectional study was conducted in ICUs of Paris-area hospitals between January 18, 2013 and April 2, 2013. All types of adult ICUs were included (medical, surgical and polyvalent). Included in the study were HCWs with patient contact (doctors, residents, registered nurses, nurse's aides and physical therapists). Participation was proposed to all eligible HCWs present during on-site visits. Temporary staff not typically assigned to the given ICU was excluded. Data were collected using an individual questionnaire administered in interviews during day and night shifts (N=682). Stress and fatigue outcomes included the 10-item Perceived Stress Scale (PSS10), the Nottingham Health Profile sleep and energy level rubrics and the current fatigue state at the interview. Multivariate analysis was restricted to nurse and nurse's aide data (n=536). Doctors and residents reported fewer sleep difficulties but were more likely to report a tired current state. Female gender was associated with higher stress levels and greater fatigue for all outcomes, while greater social support of supervisor or colleagues decreased stress and fatigue. At the organizational level, longer shifts (12 h vs. 8 h) were associated with tired current state and greater sleep difficulties. Personnel on rotating shifts had lower stress and a better current state, while those on night shifts had greater sleep and energy level difficulties. Even when controlling for demographic factors

  6. Stress Hormone and Reproductive System in Response to Honey Supplementation Combined with Different Jumping Exercise Intensities in Female Rats

    Directory of Open Access Journals (Sweden)

    Maryam Mosavat

    2014-01-01

    Full Text Available This study was performed to determine the effects of 8-week honey supplementation combined with different jumping exercise intensities on serum cortisol, progesterone, estradiol, and reproductive organs. Eighty-four 9-week-old female rats were divided into 7 groups: baseline controls (C0, sedentary group (C, 20 and 80 jumps per day (Ex20J, Ex80J, honey (H, and combined honey with 20 and 80 jumps per day (HEx20J, HEx80J groups. Jumping exercise was performed at 5 days/week and honey was given at a dosage of 1 g/kg body weight/day for 7 days/week. The level of serum cortisol was higher in Ex20J and Ex80J compared to C. There was significantly lower value of serum cortisol in HEx20J compared to Ex80J. Serum progesterone levels were significantly lower in Ex20J and Ex80J compared to C. However, serum progesterone levels were significantly higher in HEx20J and HEx80J compared to Ex20J and Ex80J. Relative uterine weights were significantly greater in HEx20J compared to C and HEx80J, respectively. There was no significant difference in estradiol level and relative ovarian weights among all the groups. Therefore, honey elicited beneficial effects in reducing the increase of cortisol and in increasing the reduce of progesterone levels induced by different intensities jumping exercise in female rats.

  7. Effects of drought stress on growth, solute accumulation and membrane stability of leafy vegetable, huckleberry (Solanum scabrum Mill.).

    Science.gov (United States)

    Assaha, Dekoum Vincent Marius; Liu, Liyun; Ueda, Akihiro; Nagaoka, Toshinori; Saneoka, Hirofumi

    2016-01-01

    The present study sought to investigate the factors implicated in growth impairment of huckleberry (a leafy vegetable) under water stress conditions. To achieve this, seedlings of plant were subjected to control, mild stress and severe stress conditions for 30 days. Plant growth, plant water relation, gas exchange, oxidative stress damage, electrolyte leakage rate, mineral content and osmolyte accumulation were measured. Water deficit markedly decreased leaf, stem and root growth. Leaf photosynthetic rate was tremendously reduced by decrease in stomatal conductance under stress conditions. Malondialdehyde (MDA) content markedly increased under mild (82%) and severe (131%) stress conditions, while electrolyte leakage rate (ELR) increased by 59% under mild stress and 3-fold under severe stress. Mineral content in leafwas high in stressed plants, while proline content markedly increased under mild stress (12-fold) and severe stress (15-fold), with corresponding decrease in osmotic potential at full turgor and an increase in osmotic adjustment. These results suggest that maintenance of high mineral content and osmotic adjustment constitute important adaptations in huckleberry under water deficit conditions and that growth depression under drought stress would be mainly caused by increased electrolyte leakage resulting from membrane damage induced by oxidative stress.

  8. Influence of the crack propagation rate in the obtaining opening and closing stress intensity factor by finite element method

    Directory of Open Access Journals (Sweden)

    Luiz Carlos H. Ricardo

    2016-03-01

    Full Text Available Crack propagation simulation began with the development of the finite element method; the analyses were conducted to obtain a basic understanding of the crack growth. Today structural and materials engineers develop structures and materials properties using this technique as criterion design. The aim of this paper is to verify the effect of different crack propagation rates in determination of crack opening and closing stress of an ASTM specimen under a standard suspension spectrum loading from FD&E SAE Keyhole Specimen Test Load Histories by finite element analysis. The crack propagation simulation was based on release nodes at the minimum loads to minimize convergence problems. To understand the crack propagation processes under variable amplitude loading, retardation effects are discussed.

  9. FEM Analyses for T-H-M-M Coupling Processes in Dual-Porosity Rock Mass under Stress Corrosion and Pressure Solution

    Directory of Open Access Journals (Sweden)

    Yu-Jun Zhang

    2012-01-01

    Full Text Available The models of stress corrosion and pressure solution established by Yasuhara et al. were introduced into the 2D FEM code of thermo-hydro-mechanical-migratory coupling analysis for dual-porosity medium developed by the authors. Aiming at a hypothetical model for geological disposal of nuclear waste in an unsaturated rock mass from which there is a nuclide leak, two computation conditions were designed. Then the corresponding two-dimensional numerical simulation for the coupled thermo-hydro-mechanical-migratory processes were carried out, and the states of temperatures, rates and magnitudes of aperture closure, pore and fracture pressures, flow velocities, nuclide concentrations and stresses in the rock mass were investigated. The results show: the aperture closure rates caused by stress corrosion are almost six orders higher than those caused by pressure solution, and the two kinds of closure rates climb up and then decline, furthermore tend towards stability; when the effects of stress corrosion and pressure solution are considered, the negative fracture pressures in near field rise very highly; the fracture aperture and porosity are decreases in the case 1, so the relative permeability coefficients reduce, therefore the nuclide concentrations in pore and fracture in this case are higher than those in case 2.

  10. Effects of High-Intensity Swimming on Lung Inflammation and Oxidative Stress in a Murine Model of DEP-Induced Injury.

    Directory of Open Access Journals (Sweden)

    Leonardo C M Ávila

    Full Text Available Studies have reported that exposure to diesel exhaust particles (DEPs induces lung inflammation and increases oxidative stress, and both effects are susceptible to changes via regular aerobic exercise in rehabilitation programs. However, the effects of exercise on lungs exposed to DEP after the cessation of exercise are not clear. Therefore, the aim of this study was to evaluate the effects of high-intensity swimming on lung inflammation and oxidative stress in mice exposed to DEP concomitantly and after exercise cessation. Male Swiss mice were divided into 4 groups: Control (n = 12, Swimming (30 min/day (n = 8, DEP (3 mg/mL-10 μL/mouse (n = 9 and DEP+Swimming (n = 8. The high-intensity swimming was characterized by an increase in blood lactate levels greater than 1 mmoL/L between 10th and 30th minutes of exercise. Twenty-four hours after the final exposure to DEP, the anesthetized mice were euthanized, and we counted the number of total and differential inflammatory cells in the bronchoalveolar fluid (BALF, measured the lung homogenate levels of IL-1β, TNF-α, IL-6, INF-ϫ, IL-10, and IL-1ra using ELISA, and measured the levels of glutathione, non-protein thiols (GSH-t and NPSH and the antioxidant enzymes catalase and glutathione peroxidase (GPx in the lung. Swimming sessions decreased the number of total cells (p<0.001, neutrophils and lymphocytes (p<0.001; p<0.05 in the BALF, as well as lung levels of IL-1β (p = 0.002, TNF-α (p = 0.003, IL-6 (p = 0.0001 and IFN-ϫ (p = 0.0001. However, the levels of IL-10 (p = 0.01 and IL-1ra (p = 0.0002 increased in the swimming groups compared with the control groups, as did the CAT lung levels (p = 0.0001. Simultaneously, swimming resulted in an increase in the GSH-t and NPSH lung levels in the DEP group (p = 0.0001 and p<0.002. We concluded that in this experimental model, the high-intensity swimming sessions decreased the lung inflammation and oxidative stress status during DEP-induced lung

  11. Effects of cold working ratio and stress intensity factor on intergranular stress corrosion cracking susceptibility of non-sensitized austenitic stainless steels in simulated BWR and PWR primary water

    International Nuclear Information System (INIS)

    Yaguchi, Seiji; Yonezawa, Toshio

    2012-01-01

    To evaluate the effects of cold working ratio, stress intensity factor and water chemistry on an IGSCC susceptibility of non-sensitized austenitic stainless steel, constant displacement DCB specimens were applied to SCC tests in simulated BWR and PWR primary water for the three types of austenitic stainless steels, Types 316L, 347 and 321. IGSCC was observed on the test specimens in simulated BWR and PWR primary water. The observed IGSCC was categorized into the following two types. The one is that the IGSCC observed on the same plane of the pre-fatigue crack plane, and the other is that the IGSCC observed on a plane perpendicular to the pre-fatigue crack plane. The later IGSCC fractured plane is parallel to the rolling plane of a cold rolled material. Two types of IGSCC fractured planes were changed according to the combination of the testing conditions (cold working ratio, stress intensity factor and simulated water). It seems to suggest that the most susceptible plane due to fabrication process of materials might play a significant role of IGSCC for non-sensitized cold worked austenitic stainless steels, especially, in simulated PWR primary water. Based upon evaluating on the reference crack growth rate (R-CGR) of the test specimens, the R-CGR seems to be mainly affected by cold working ratio. In case of simulated PWR primary water, it seems that the effect of metallurgical aspects dominates IGSCC susceptibility. (author)

  12. Investigation of the main chemical properties of water-magnesium chloride solutions. Application to the understanding of stress corrosion phenomena in 17.12 Mo stainless steel

    International Nuclear Information System (INIS)

    Hasni, Abdellatif

    1988-01-01

    This research thesis reports the investigation of the main chemical properties of concentrated aqueous solutions of MgCl 2 and of their influence of stress corrosion of 17Cr-12Ni-2Mo stainless steel. It shows that the most important chemical properties are the equilibrium pH and the acidity range of MgCl 2 aqueous solutions, and that they strongly depend on solution temperature and concentration. The medium pH is governed by the increased acidity of water in presence of Mg ++ ions, while the acidity range is determined by a hydrolysis reaction of these ions which results in a precipitation of magnesium hydroxyl-chlorides. The investigation of stress corrosion behaviour of the steel in MgCl 2 solutions with varying temperature and concentration shows that this behaviour comes down to a prevailing pH effect which results from the variation of these both parameters, with a not negligible but less important effect of temperature. A study of cracking surfaces indicates that it is possible to pass from a transgranular to an intergranular mode by a variation of either media aggressiveness (pH, temperature, voltage) or strain rate. These results are explained by a concept of kinetic factor which limits stress corrosion [fr

  13. Effect of pH Value on the Electrochemical and Stress Corrosion Cracking Behavior of X70 Pipeline Steel in the Dilute Bicarbonate Solutions

    Science.gov (United States)

    Cui, Z. Y.; Liu, Z. Y.; Wang, L. W.; Ma, H. C.; Du, C. W.; Li, X. G.; Wang, X.

    2015-11-01

    In this work, effects of pH value on the electrochemical and stress corrosion cracking (SCC) behavior of X70 pipeline steel in the dilute bicarbonate solutions were investigated using electrochemical measurements, slow strain rate tensile tests and surface analysis techniques. Decrease of the solution pH from 6.8 to 6.0 promotes the anodic dissolution and cathodic reduction simultaneously. Further decrease of the pH value mainly accelerates the cathodic reduction of X70 pipeline steel. As a result, when the solution pH decreases form 6.8 to 5.5, SCC susceptibility decreases because of the enhancement of the anodic dissolution. When the solution pH decreases from 5.5 to 4.0, SCC susceptibility increases gradually because of the acceleration of cathodic reactions.

  14. Stress !!!

    NARCIS (Netherlands)

    Fledderus, M.

    2012-01-01

    Twee op de vijf UT-studenten hebben last van ernstige studiestress, zo erg zelfs dat het ze in hun privéleven belemmert. Die cijfers komen overeen met het landelijk beeld van stress onder studenten. Samen met 14 andere universiteits- en hogeschoolbladen enquêteerde UT Nieuws bijna 5500 studenten.

  15. Current state of low-cycle fatigue research based on multiaxial stress intensity and its challenges. Part 1. Focusing on low-cycle fatigue strength evaluation method of elbow piping subjected to in-plane cyclic bending displacement load

    International Nuclear Information System (INIS)

    Urabe, Yoshio

    2017-01-01

    The R and D of fatigue strength at multiaxial stress intensity is recognized to become extremely important in the future in terms of the elaboration of low-cycle fatigue evaluation of various structures including piping systems and reflection on those standards. This paper focuses on the evaluation method developed by the author, namely cumulative damage rule in consideration of multiaxial stress intensity, and explains the concept and the results of verification and evaluation. It also discusses the engineering problems of the current low cycle fatigue assessment technology that were clarified in the process of developing low-cycle fatigue assessment method based on multiaxial stress intensity. The conservative lifespan and somewhat more conservative actual lifetime of elbow piping can be estimated by the conventional 'revised universal slope method' and 'advanced revised universal slope method.' However, these are empirical rules, and the theoretical basis is not clear. From 'cumulative damage rule in consideration of multiaxial stress intensity,' the author calculated furthermore 'low cycle fatigue evaluation formula based on cumulative damage rule in consideration of multi-axial stress intensity,' and examined it. As a result, an evaluation formula that can reasonably assume the equivalent thermoplastic strain range could be obtained at half of the repeat count as targeted. Furthermore, at the stage where future high precision FEM analysis can be used, direct low-cycle fatigue life curve can be established. (A.O.)

  16. Correlates of improvement in substance abuse among dually diagnosed veterans with post-traumatic stress disorder in specialized intensive VA treatment.

    Science.gov (United States)

    Coker, Kendell L; Stefanovics, Elina; Rosenheck, Robert

    2016-01-01

    Substantial rates of substance use comorbidity have been observed among veterans with Post-Traumatic Stress Disorder (PTSD), highlighting the need to identify patient and program characteristics associated with improved outcomes for substance abuse. Data were drawn from 12,270 dually diagnosed veterans who sought treatment from specialized intensive Veterans Health Administration PTSD programs between 1993 and 2011. The magnitude of the improvement in Addiction Severity Index (ASI) alcohol and drug use composite scores from baseline was moderate, with effect sizes (ES) of -.269 and -.287, respectively. Multivariate analyses revealed that treatment in longer-term programs, being prescribed psychiatric medication, and planned participation in reunions were all associated with slightly improved outcomes. Reductions in substance use measures were associated with robust improvements in PTSD symptoms and violent behavior. These findings suggest not only synergistic treatment effects linking improvement in PTSD symptoms with substance use disorders among dually diagnosed veterans with PTSD, but also to reductions in violent behavior. Furthermore, the findings indicate that proper discharge planning in addition to intensity and duration of treatment for dually diagnosed veterans with severe PTSD may result in better outcomes. Further dissemination of evidence-based substance abuse treatment may benefit this population. (c) 2016 APA, all rights reserved).

  17. Low intensity shear stress increases endothelial ELR+ CXC chemokine production via a focal adhesion kinase-p38{beta} MAPK-NF-{kappa}B pathway.

    Science.gov (United States)

    Shaik, Sadiq S; Soltau, Thomas D; Chaturvedi, Gaurav; Totapally, Balagangadhar; Hagood, James S; Andrews, William W; Athar, Mohammad; Voitenok, Nikolai N; Killingsworth, Cheryl R; Patel, Rakesh P; Fallon, Michael B; Maheshwari, Akhil

    2009-02-27

    CXC chemokines with a glutamate-leucine-arginine (ELR) tripeptide motif (ELR(+) CXC chemokines) play an important role in leukocyte trafficking into the tissues. For reasons that are not well elucidated, circulating leukocytes are recruited into the tissues mainly in small vessels such as capillaries and venules. Because ELR(+) CXC chemokines are important mediators of endothelial-leukocyte interaction, we compared chemokine expression by microvascular and aortic endothelium to investigate whether differences in chemokine expression by various endothelial types could, at least partially, explain the microvascular localization of endothelial-leukocyte interaction. Both in vitro and in vivo models indicate that ELR(+) CXC chemokine expression is higher in microvascular endothelium than in aortic endothelial cells. These differences can be explained on the basis of the preferential activation of endothelial chemokine production by low intensity shear stress. Low shear activated endothelial ELR(+) CXC chemokine production via cell surface heparan sulfates, beta(3)-integrins, focal adhesion kinase, the mitogen-activated protein kinase p38beta, mitogen- and stress-associated protein kinase-1, and the transcription factor.

  18. The Effects of Kangaroo Care in the Neonatal Intensive Care Unit on the Physiological Functions of Preterm Infants, Maternal-Infant Attachment, and Maternal Stress.

    Science.gov (United States)

    Cho, Eun-Sook; Kim, Shin-Jeong; Kwon, Myung Soon; Cho, Haeryun; Kim, Eun Hye; Jun, Eun Mi; Lee, Sunhee

    2016-01-01

    This study was conducted to identify the effects of kangaroo care on the physiological functions of preterm infants, maternal-infant attachment, and maternal stress. For this study, a quasi-experiment design was used with a nonequivalent control group, and a pre- and post-test. Data were collected from preterm infants with corrected gestational ages of ≥33weeks who were hospitalized between May and October 2011. Twenty infants were assigned to the experimental group and 20 to the control group. As an intervention, kangaroo care was provided in 30-min sessions conducted thrice a week for a total of 10 times. The collected data were analyzed by using the t test, repeated-measures ANOVA, and the ANCOVA test. After kangaroo care, the respiration rate significantly differed between the two groups (F=5.701, p=.020). The experimental group had higher maternal-infant attachment scores (F=25.881, pinfant physiological functions such as respiration rate, increasing maternal-infant attachment, and reducing maternal stress. This study suggests that kangaroo care can be used to promote emotional bonding and support between mothers and their babies, and to stabilize the physiological functions of premature babies. Kangaroo care may be one of the most effective nursing interventions in the neonatal intensive care unit for the care of preterm infants and their mothers. Copyright © 2016 Elsevier Inc. All rights reserved.

  19. Acute effects of resistance exercise and intermittent intense aerobic exercise on blood cell count and oxidative stress in trained middle-aged women.

    Science.gov (United States)

    Cardoso, A M; Bagatini, M D; Roth, M A; Martins, C C; Rezer, J F P; Mello, F F; Lopes, L F D; Morsch, V M; Schetinger, M R C

    2012-12-01

    The aim of this study was to compare the effect of an intermittent intense aerobic exercise session and a resistance exercise session on blood cell counts and oxidative stress parameters in middle-aged women. Thirty-four women were selected and divided into three groups: RE group (performing 60 min of resistance exercises, N = 12), spinning group (performing 60 min of spinning, N = 12), and control group (not exercising regularly, N = 10). In both exercise groups, lymphocytes and monocytes decreased after 1-h recuperation (post-exercise) compared to immediately after exercise (P exercise, in both exercised groups, a significant increase in TBARS (from 16.5 ± 2 to 25 ± 2 for the spinning group and from 18.6 ± 1 to 28.2 ± 3 nmol MDA/mL serum for the RE group) and protein carbonyl (from 1.0 ± 0.3 to 1.6 ± 0.2 for the spinning group and from 0.9 ± 0.2 to 1.5 ± 0.2 nmol/mg protein for the RE group) was observed (P exercise induces immune suppression and increases the production of reactive oxygen species, causing oxidative stress in middle-aged and trained women. Furthermore, we demonstrated that trained women show improved antioxidant capacity and lower oxidative damage than sedentary ones, demonstrating the benefits of chronic regular physical activity.

  20. Influence of Mild Traumatic Brain Injury (TBI) and Posttraumatic Stress Disorder (PTSD) on Pain Intensity Levels in OEF/OIF/OND Veterans.

    Science.gov (United States)

    Stojanovic, Milan P; Fonda, Jennifer; Fortier, Catherine Brawn; Higgins, Diana M; Rudolph, James L; Milberg, William P; McGlinchey, Regina E

    2016-11-01

    Mild traumatic brain injury (mTBI) and posttraumatic stress disorder (PTSD) are common among US veterans of Operation Enduring Freedom/Operation Iraqi Freedom/Operation New Dawn (OEF/OIF/OND). We postulated that these injuries may modulate pain processing in these individuals and affect their subjective pain levels. Cross-sectional. 310 deployed service members of OEF/OIF/OND without a lifetime history of moderate or severe TBI were included in this study. All participants completed a comprehensive evaluation for Blast Exposure, mTBI, PTSD, and Pain Levels. The Boston Assessment of TBI-Lifetime Version (BAT-L) was used to assess blast exposure and potential brain injury during military service. The Clinician-Administered PTSD Scale (CAPS) characterized presence and severity of PTSD. The Visual Analog Scale (VAS) was used to assess pain intensity over the previous month before the interview, with higher scores indicative of worse pain. Statistical analysis was performed by ANOVA and results were adjusted for co-morbidities, clinical characteristics and demographic data. In comparison to control participants (veterans without mTBI or current PTSD), veterans with both current PTSD and mTBI reported the highest pain intensity levels, followed by veterans with PTSD only (P Pain levels in veterans with mTBI only were comparable to control participants. Comorbid PTSD and mTBI is associated with increased self-reported pain intensity. mTBI alone was not associated with increased pain. Published by Oxford University Press on behalf of the American Academy of Pain Medicine 2016. This work is written by US Government employees and is in the public domain in the US.

  1. High-intensity interval training beneficial effects on body mass, blood pressure, and oxidative stress in diet-induced obesity in ovariectomized mice.

    Science.gov (United States)

    Pimenta, Marcel; Bringhenti, Isabele; Souza-Mello, Vanessa; Dos Santos Mendes, Iara Karise; Aguila, Marcia B; Mandarim-de-Lacerda, Carlos A

    2015-10-15

    To investigate the possible beneficial effect of high-intensity interval training (HIIT) on skeletal muscle oxidative stress, body mass (BM) and systolic blood pressure (SBP) in ovariectomized mice fed or not fed a high-fat diet. Three-month-old female C57BL/6 mice were bilaterally ovariectomized (OVX group) or submitted to surgical stress without ovariectomy (SHAM group) and separated into standard chow (SHAM-SC; OVX-SC) and high-fat diet (SHAM-HF; OVX-HF) groups. After 13 weeks, an HIIT program (swimming) was carried out for 8 weeks in non-trained (NT) and trained (T) groups. The significant reduction of uterine mass and the cytological examination of vaginal smears in the OVX group confirmed that ovariectomy was successful. Before the HIIT protocol, the ovariectomized groups showed a greater BM than the SHAM group, irrespective of the diet they received. The HIIT minimized BM gain in animals fed an HF diet and/or ovariectomized. SBP and total cholesterol were increased in the OVX and HF animals compared to their counterparts, and the HIIT efficiently reduced these factors. In the HF and OVX mice, the muscular superoxide dismutase and catalase levels were low while their glutathione peroxidase and glutathione reductase levels were high and the HIIT normalized these parameters. Diet-induced obesity maximizes the deleterious effects of an ovariectomy. The HIIT protocol significantly reduced BM, SBP and oxidative stress in the skeletal muscle indicating that HIIT diminishes the cardiovascular and metabolic risk that is inherent to obesity and menopause. Copyright © 2015 Elsevier Inc. All rights reserved.

  2. Stress concentration during pellet cladding interaction: Comparison of closed-form solutions with 2D(r,θ) finite element simulations

    International Nuclear Information System (INIS)

    Sercombe, Jérôme; Masson, Renaud; Helfer, Thomas

    2013-01-01

    Highlights: • This paper presents closed-formed solutions concerning pellet cladding interaction. • First, the opening of a radial crack in a pellet fragment is estimated. • Second, the stresses in the cladding in front of the pellet crack are calculated. • The closed-formed solutions are found in good agreement with 2D FE simulations. • They are then used in the fuel code ALCYONE to model PCI during power ramps. -- Abstract: This paper presents two closed-form solutions that can be used to enrich the mechanical description of fuel pellets and cladding behavior in standard one-dimensional based fuel performance codes. The first one is concerned with the estimation of the opening of a radial crack in a pellet fragment induced by the radial thermal gradient in the pellet and limited by the pellet-clad contact pressure. The second one describes the stress distribution in a cladding bore in front of an opening pellet crack. A linear angular variation of the pellet-clad contact pressure and a constant prescribed radial displacement are considered. The closed-form solutions are checked by comparison to independent finite element models of the pellet fragment and of the cladding. Their ability to describe non-axisymmetric displacement and stress fields during loading histories representative of base irradiation and power ramps is then demonstrated by cross-comparison with the 2D pellet fragment-cladding model of the multi-dimensional fuel performance code ALCYONE. The calculated radial crack opening profiles at different times and the hoop stress concentration in the cladding at the top of the ramp are found in good agreement with ALCYONE

  3. Transtorno de estresse pós-traumático em pacientes de unidade de terapia intensiva Post-traumatic stress disorder in intensive care unit patients

    Directory of Open Access Journals (Sweden)

    Andrea Vannini Santesso Caiuby

    2010-03-01

    Full Text Available O transtorno de estresse pós-traumático tem sido descrito em pacientes após tratamento em unidade de terapia intensiva. O objetivo foi revisar estudos sobre os aspectos psicológicos e as intervenções terapêuticas destes pacientes após internação em unidade de terapia intensiva. Trinta e oito artigos foram incluídos. A prevalência de transtorno de estresse pós-traumático variou de 17% a 30% e a incidência de 14% a 24%. Os fatores de risco foram: história prévia de ansiedade, depressão ou pânico, ter memórias traumáticas ilusórias (memórias derivadas de formações psíquicas como sonho e delirium, tempo de ventilação mecânica, experiências estressantes, crenças e comportamentos de característica depressiva. Doses altas de opióides, sintomas na retirada da sedação ou analgesia e o uso de lorazepam foram relacionados ao aumento de delirium e de memória ilusória. A sintomatologia do transtorno pode ser reduzida com a administração de hidrocortisona, com a interrupção diária da sedação e não foram encontrados estudos de efetividade de intervenção psicológica.Post-traumatic stress disorder has been detected in patients after treatment in intensive care unit. The main goal of this study is to review the psychological aspects and therapeutic interventions on those patients after their treatment on intensive care unit. Thirty eight articles have been included. The prevalence of post-traumatic stress disorder has varied from 17% up to 30% and the incidence from 14% to 24%. The risk factors were: previous anxiety historic, depression or panic, having delusional traumatic memories (derived from psychic formations as dreams and delirium, belief effects, depressive behavior, stressing experiences and mechanical ventilation. High doses of opiates, symptoms caused by sedation or analgesia reduction and the use of lorazepam were related with the increase of delirium and delusional memory. The disorder sintomatology

  4. Seismic Activity Related to the 2002-2003 Mt. Etna Volcano Eruption (Italy): Fault Plane Solutions and Stress Tensor Computation

    Science.gov (United States)

    Barberi, G.; Cammarata, L.; Cocina, O.; Maiolino, V.; Musumeci, C.; Privitera, E.

    2003-04-01

    Late on the night of October 26, 2002, a bi-lateral eruption started on both the eastern and the southeastern flanks of Mt. Etna. The opening of the eruptive fracture system on the NE sector and the reactivation of the 2001 fracture system, on the S sector, were accompanied by a strong seismic swarm recorded between October 26 and 28 and by sharp increase of volcanic tremor amplitude. After this initial phase, on October 29 another seismogenetic zone became active in the SE sector of the volcano. At present (January 2003) the eruption is still in evolution. During the whole period a total of 862 earthquakes (Md≫1) was recorded by the local permanent seismic network run by INGV - Sezione di Catania. The maximum magnitude observed was Md=4.4. We focus our attention on 55 earthquakes with magnitude Md≫ 3.0. The dataset consists of accurate digital pickings of P- and S-phases including first-motion polarities. Firstly earthquakes were located using a 1D velocity model (Hirn et alii, 1991), then events were relocated by using two different 3D velocity models (Aloisi et alii, 2002; Patane et alii, 2002). Results indicate that most of earthquakes are located to the east of the Summit Craters and to northeast of them. Fault plane solutions (FPS) obtained show prevalent strike-slip rupture mechanisms. The suitable FPSs were considered for the application of Gephart and Forsyth`s algorithm in order to evaluate seismic stress field characteristics. Taking into account the preliminary results we propose a kinematic model of the eastern flank eastward movement in response of the intrusion processes in the central part of the volcano. References Aloisi M., Cocina O., Neri G., Orecchio B., Privitera E. (2002). Seismic tomography of the crust underneath the Etna volcano, Sicily. Physics of the Earth and Planetary Interiors 4154, pp. 1-17 Hirn A., Nercessian A., Sapin M., Ferrucci F., Wittlinger G. (1991). Seismic heterogeneity of Mt. Etna: structure and activity. Geophys. J

  5. The determination of the first normal stress coefficient of an exopolysaccharide solution by rheo-optical measurements

    NARCIS (Netherlands)

    Zarzycki, R.; Linden, van der E.; Sagis, L.M.C.; Venema, P.; Babuchowski, A.

    2004-01-01

    Abstract This paper illustrates how rheo-optical techniques may be utilized to determine the first normal stress coefficient for an exopolysaccharide (EPS) produced by the Lactobacillus delbrueckii ssp. bulgaricus LY03, which is widely used in yoghurt production. In this technique both shear stress,

  6. Stress.

    Science.gov (United States)

    Chambers, David W

    2008-01-01

    We all experience stress as a regular, and sometimes damaging and sometimes useful, part of our daily lives. In our normal ups and downs, we have our share of exhaustion, despondency, and outrage--matched with their corresponding positive moods. But burnout and workaholism are different. They are chronic, dysfunctional, self-reinforcing, life-shortening habits. Dentists, nurses, teachers, ministers, social workers, and entertainers are especially susceptible to burnout; not because they are hard-working professionals (they tend to be), but because they are caring perfectionists who share control for the success of what they do with others and perform under the scrutiny of their colleagues (they tend to). Workaholics are also trapped in self-sealing cycles, but the elements are ever-receding visions of control and using constant activity as a barrier against facing reality. This essay explores the symptoms, mechanisms, causes, and successful coping strategies for burnout and workaholism. It also takes a look at the general stress response on the physiological level and at some of the damage American society inflicts on itself.

  7. Adaptação cultural e validação para a língua portuguesa da Parental Stress Scale: Neonatal Intensive Care Unit (PSS:NICU Adaptación cultural y validación al idioma português del Parental Stress Scale: Neonatal Intensive Care Unit (PSS:NICU Cultural adaptation and validation for the portuguese language of the Parental Stress Scale: Neonatal Intensive Care Unit (PSS:NICU

    Directory of Open Access Journals (Sweden)

    Sandra Regina de Souza

    2012-01-01

    Full Text Available OBJETIVO: Traduzir, realizar a adaptação cultural e validar a escala Parental Stress Scale:Neonatal Intensive Care Unit (PSS:NICU para a língua portuguesa. MÉTODOS: Utilizou-se o método descritivo de validação de instrumentos de medida, baseado nas etapas propostas por Guillemin et al. A análise da confiabilidade foi realizada por meio dos testes e retestes e da consistência interna. Na validação clínica, participaram 163 pais de recém-nascidos internados em Unidade de Terapia Intensiva Neonatal (UTIN. RESULTADOS: Os coeficientes de correlação intraclasse ficaram em torno de 0,70 mostrando boa estabilidade entre as duas avaliações. A análise fatorial pelo método de componentes principais utilizou os mesmos critérios da escala original, com rotação Varimax, com grau de variância adequado de 57,9%. Os maiores níveis de estresse dos pais foram obtidos na subescala "alteração do papel de pais". CONCLUSÃO: A PSS:NICU na versão em português é uma ferramenta válida e confiável para avaliação do estresse de pais com filho internado na UTIN.OBJETIVO: Traducir, realizar la adaptación cultural y validar la escala Parental Stress Scale:Neonatal Intensive Care Unit (PSS:NICU al idioma portugués. MÉTODOS: Se utilizó el método descriptivo de validación de instrumentos de medida, basado en las etapas propuestas por Guillemin et al. El análisis de la confiabilidad fue realizado por medio de los tests y retests y de la consistencia interna. En la validación clínica, participaron 163 padres de recién nacidos internados en una Unidad de Cuidados Intensivos Neonatal (UCIN. RESULTADOS: Los coeficientes de correlación intraclase quedaron alrededor de 0,70 mostrando buena estabilidad entre las dos evaluaciones El análisis factorial por el método de componentes principales utilizó los mismos criterios de la escala original, con rotación Varimax, con grado de varianza adecuado de 57,9%. Los mayores niveles de estrés de

  8. Inhibition of stress corrosion cracking of alloy 600 in 10% NaOH solutions with and with lead oxide at 315 C

    International Nuclear Information System (INIS)

    Hur, D.H.; Kim, J.S.; Baek, J.S.; Kim, J.G.

    2002-01-01

    Alloy 600 steam generator tube materials have experienced various degradations by corrosion such as stress corrosion cracking (SCC) on the inner and outer diameter surface of tube, intergranular attack and pitting, and by mechanical damage such as fretting-wear and fatigue. These tube degradations not only increase the costs for tube inspection, maintenance and repair but also reduce the operation safety and the efficiency of plants. Therefore, the methodologies have been extensively developed to mitigate them. The addition of inhibitors to the coolant is a feasible method to mitigate tube degradations in operating plants. In this paper, a new inhibitor is proposed to mitigate the secondary side stress corrosion cracking of alloy 600 tubes. The effect of inhibitors on the electrochemical behavior and the stress corrosion cracking resistance of alloy 600 was evaluated in 10% sodium hydroxide solution with and without lead oxide at 315 C. The specimens of a C-ring type for stress corrosion cracking test were polarized at 150 mV above the corrosion potential for 120 hours without and with inhibitors such as titanium oxide, titanium boride, cerium boride. The chemical compositions of the films formed on the crack tip in the C-ring specimens were analyzed using a scanning Auger electron spectroscopy. The cerium boride, the most effective inhibitors, was observed to decrease the crack propagation rate more than a factor of three compared with that obtained in pure 10% NaOH solution. Furthermore, no SCC was observed in lead contaminated 10% NaOH solution by the addition of the cerium boride. (authors)

  9. A direct solution procedure for calculating time-varying stresses in structural systems by the principles of variational calculus

    International Nuclear Information System (INIS)

    Stefanou, G.D.

    1975-01-01

    The calculation of time-dependent stresses in structural systems operating at elevated temperatures with temperature gradients is discussed. The proposed method described in this report is of a direct formulation technique and

  10. Solutions of dissimilar material singularity and contact problems

    International Nuclear Information System (INIS)

    Yang, Y.

    2003-09-01

    Due to the mismatch of the material properties of joined components, after a homogeneous temperature change or under a mechanical loading, very high stresses occur near the intersection of the interface and the outer surface, or near the intersection of two interfaces. For most material combinations and joint geometries, there exists even a stress singularity. These high stresses may cause fracture of the joint. The investigation of the stress situation near the singular point, therefore, is of great interest. Especially, the relationship between the singular stress exponent, the material data and joint geometry is important for choosing a suitable material combination and joint geometry. In this work, the singular stress field is described analytically in case of the joint having a real and a complex eigenvalue. Solutions of different singularity problems are given, which are two dissimilar materials joint with free edges; dissimilar materials joint with edge tractions; joint with interface corner; joint with a given displacement at one edge; cracks in dissimilar materials joint; contact problem in dissimilar materials and logarithmic stress singularity. For an arbitrary joint geometry and material combination, the stress singular exponent, the angular function and the regular stress term can be calculated analytically. The stress intensity factors for a finite joint can be determined applying numerical methods, e.g. the finite element method (FEM). The method to determine more than one stress intensity factor is presented. The characteristics of the eigenvalues and the stress intensity factors are shown for different joint conditions. (orig.)

  11. Acute effects of resistance exercise and intermittent intense aerobic exercise on blood cell count and oxidative stress in trained middle-aged women

    Energy Technology Data Exchange (ETDEWEB)

    Cardoso, A.M. [Departamento de Química, Centro de Ciências Naturais e Exatas, Universidade Federal de Santa Maria, Santa Maria, RS (Brazil); Bagatini, M.D. [Curso de Enfermagem, Campus Chapecó, Universidade Federal da Fronteira Sul, Chapecó, SC (Brazil); Roth, M.A. [Departamento de Desportos Individuais, Centro de Educação Física e Desportos, Universidade Federal de Santa Maria, Santa Maria, RS (Brazil); Martins, C.C.; Rezer, J.F.P. [Departamento de Química, Centro de Ciências Naturais e Exatas, Universidade Federal de Santa Maria, Santa Maria, RS (Brazil); Mello, F.F. [Departamento de Desportos Individuais, Centro de Educação Física e Desportos, Universidade Federal de Santa Maria, Santa Maria, RS (Brazil); Lopes, L.F.D. [Departamento de Administração, Centro de Ciências Sociais e Humanas, Universidade Federal de Santa Maria, Santa Maria, RS (Brazil); Morsch, V.M.; Schetinger, M.R.C. [Departamento de Química, Centro de Ciências Naturais e Exatas, Universidade Federal de Santa Maria, Santa Maria, RS (Brazil)

    2012-10-26

    The aim of this study was to compare the effect of an intermittent intense aerobic exercise session and a resistance exercise session on blood cell counts and oxidative stress parameters in middle-aged women. Thirty-four women were selected and divided into three groups: RE group (performing 60 min of resistance exercises, N = 12), spinning group (performing 60 min of spinning, N = 12), and control group (not exercising regularly, N = 10). In both exercise groups, lymphocytes and monocytes decreased after 1-h recuperation (post-exercise) compared to immediately after exercise (P < 0.05). Immediately after exercise, in both exercised groups, a significant increase in TBARS (from 16.5 ± 2 to 25 ± 2 for the spinning group and from 18.6 ± 1 to 28.2 ± 3 nmol MDA/mL serum for the RE group) and protein carbonyl (from 1.0 ± 0.3 to 1.6 ± 0.2 for the spinning group and from 0.9 ± 0.2 to 1.5 ± 0.2 nmol/mg protein for the RE group) was observed (P < 0.05). A decrease in antioxidant activities (non-protein sulfhydryl, superoxide dismutase, catalase) was also demonstrated with a negative correlation between damage markers and antioxidant body defenses (P < 0.05). These results indicate that an acute bout of intermittent or anaerobic exercise induces immune suppression and increases the production of reactive oxygen species, causing oxidative stress in middle-aged and trained women. Furthermore, we demonstrated that trained women show improved antioxidant capacity and lower oxidative damage than sedentary ones, demonstrating the benefits of chronic regular physical activity.

  12. Acute effects of resistance exercise and intermittent intense aerobic exercise on blood cell count and oxidative stress in trained middle-aged women

    Directory of Open Access Journals (Sweden)

    A.M. Cardoso

    2012-12-01

    Full Text Available The aim of this study was to compare the effect of an intermittent intense aerobic exercise session and a resistance exercise session on blood cell counts and oxidative stress parameters in middle-aged women. Thirty-four women were selected and divided into three groups: RE group (performing 60 min of resistance exercises, N = 12, spinning group (performing 60 min of spinning, N = 12, and control group (not exercising regularly, N = 10. In both exercise groups, lymphocytes and monocytes decreased after 1-h recuperation (post-exercise compared to immediately after exercise (P < 0.05. Immediately after exercise, in both exercised groups, a significant increase in TBARS (from 16.5 ± 2 to 25 ± 2 for the spinning group and from 18.6 ± 1 to 28.2 ± 3 nmol MDA/mL serum for the RE group and protein carbonyl (from 1.0 ± 0.3 to 1.6 ± 0.2 for the spinning group and from 0.9 ± 0.2 to 1.5 ± 0.2 nmol/mg protein for the RE group was observed (P < 0.05. A decrease in antioxidant activities (non-protein sulfhydryl, superoxide dismutase, catalase was also demonstrated with a negative correlation between damage markers and antioxidant body defenses (P < 0.05. These results indicate that an acute bout of intermittent or anaerobic exercise induces immune suppression and increases the production of reactive oxygen species, causing oxidative stress in middle-aged and trained women. Furthermore, we demonstrated that trained women show improved antioxidant capacity and lower oxidative damage than sedentary ones, demonstrating the benefits of chronic regular physical activity.

  13. Acute effects of resistance exercise and intermittent intense aerobic exercise on blood cell count and oxidative stress in trained middle-aged women

    International Nuclear Information System (INIS)

    Cardoso, A.M.; Bagatini, M.D.; Roth, M.A.; Martins, C.C.; Rezer, J.F.P.; Mello, F.F.; Lopes, L.F.D.; Morsch, V.M.; Schetinger, M.R.C.

    2012-01-01

    The aim of this study was to compare the effect of an intermittent intense aerobic exercise session and a resistance exercise session on blood cell counts and oxidative stress parameters in middle-aged women. Thirty-four women were selected and divided into three groups: RE group (performing 60 min of resistance exercises, N = 12), spinning group (performing 60 min of spinning, N = 12), and control group (not exercising regularly, N = 10). In both exercise groups, lymphocytes and monocytes decreased after 1-h recuperation (post-exercise) compared to immediately after exercise (P < 0.05). Immediately after exercise, in both exercised groups, a significant increase in TBARS (from 16.5 ± 2 to 25 ± 2 for the spinning group and from 18.6 ± 1 to 28.2 ± 3 nmol MDA/mL serum for the RE group) and protein carbonyl (from 1.0 ± 0.3 to 1.6 ± 0.2 for the spinning group and from 0.9 ± 0.2 to 1.5 ± 0.2 nmol/mg protein for the RE group) was observed (P < 0.05). A decrease in antioxidant activities (non-protein sulfhydryl, superoxide dismutase, catalase) was also demonstrated with a negative correlation between damage markers and antioxidant body defenses (P < 0.05). These results indicate that an acute bout of intermittent or anaerobic exercise induces immune suppression and increases the production of reactive oxygen species, causing oxidative stress in middle-aged and trained women. Furthermore, we demonstrated that trained women show improved antioxidant capacity and lower oxidative damage than sedentary ones, demonstrating the benefits of chronic regular physical activity

  14. Ultracoatings: Enabling Energy and Power Solutions in High Contact Stress Environments through next-generation Nanocoatings Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Clifton B. Higdon III

    2012-03-20

    A review of current commercially available, industrial-grade, low friction coatings will show that interfacial contact pressures nearing 1GPa ({approx}150ksi) inherently limit surface engineering solutions like WC, TiN, TiAlN, and so forth. Extremely hard coatings, then, are often pursued as the principle path, although they too are not without significant limitations. A majority of these compounds are inherently brittle in nature or may not pair well with their mating substrate. In either case, their durability in high contact stress environments is compromised. In parallel to thin film coatings, many conventional surface treatments do not yield an interface hard enough to withstand extreme stresses under load. New research into advanced, nanocomposite materials like (Ti, Zr)B2 shows great promise. Bulk compacts of this compound have demonstrated an order of magnitude better wear resistance than current offerings, notably materials like tungsten carbide. At a laboratory level, the (Ti,Zr)B2 nanocomposite material exhibited abrasive and erosive wear resistance nearly ten times better than existing mixed-phase boride systems. In ASTM abrasion and erosion testing, these new compositions exhibit wear resistance superior to other known advanced materials such as RocTec 500 and 'Borazon' cubic boron nitride. Many significant challenges exist for mass production of (Ti, Zr)B2, one of which is the necessary processing technology that is capable of minimizing deleterious impurity phases. Secondly, this material's performance is derived from a synergistic effect of the two materials existing as a single phase structure. While the individual constituents of TiB2 and ZrB2 do yield improvements to wear resistance, their singular effects are not as significant. Lastly, deposition of this material on a commercial level requires thorough knowledge of nanocomposite boride solids; the benefits associated with these innovative new materials are just being realized

  15. Occurrence of ventilator-associated pneumonia in mechanically ventilated pediatric intensive care patients during stress ulcer prophylaxis with sucralfate, ranitidine, and omeprazole.

    Science.gov (United States)

    Yildizdas, Dincer; Yapicioglu, Hacer; Yilmaz, Hayri Levent

    2002-12-01

    The purpose of the study was to evaluate the effects of sucralfate, ranitidine, and omeprazole use on incidence of ventilatory-associated pneumonia (VAP) and mortality in ventilated pediatric critical care patients. This prospective study was conducted at the pediatric intensive care unit (PICU) between August 2000 and February 2002. A total of 160 patients who needed mechanical ventilation were randomized into 4 groups according to the computer-generated random number table: group (S), (n = 38) received sucralfate suspension 60 mg/kg/d in 4 doses via the nasogastric tube that was flushed with 10 mL of sterile water; group (R), (n = 42) received ranitidine 2 mg/kg/d intravenously in 4 doses; group (O), (n = 38) received omeprazole 1 mg/kg/d intravenously in 2 doses; and group (P), (n = 42) did not receive any medication for stress ulcer prophylaxis. Treatment was begun within 6 hours of PICU admission. Seventy patients (44%) developed VAP. VAP rate was 42% (16 of 38) in the sucralfate group, 48% (20 of 42) in the ranitidine group, 45% (17 of 38) in the omeprazole group, and 41% (17 of 42) in the nontreated group. Overall mortality rate was 22% (35 of 160); it was 21% (8 of 38) in the sucralfate group, 23% (10 of 42) in the ranitidine group, 21% (8 of 38) in the omeprazole group, and 21% (9 of 42) in the nontreated group. Our results did not show any difference in the incidence of VAP and mortality in mechanically ventilated PICU patients treated with ranitidine, omeprazole, or sucralfate, or nontreated subjects (P =.963, confidence interval [CI] = 0.958-0.968; P =.988, CI = 0.985-0.991, respectively). Nine patients (5.6%) had macroscopic bleeding. There was no statistically significant difference in macroscopic bleeding between groups. Our results did not show any difference in the incidence of VAP, macroscopic stress ulcer bleeding, and mortality in the mechanically ventilated PICU patients treated with ranitidine, omeprazole, or sucralfate, or nontreated subjects

  16. The structure of the solution obtained with Reynolds-stress-transport models at the free-stream edges of turbulent flows

    Science.gov (United States)

    Cazalbou, J.-B.; Chassaing, P.

    2002-02-01

    The behavior of Reynolds-stress-transport models at the free-stream edges of turbulent flows is investigated. Current turbulent-diffusion models are found to produce propagative (possibly weak) solutions of the same type as those reported earlier by Cazalbou, Spalart, and Bradshaw [Phys. Fluids 6, 1797 (1994)] for two-equation models. As in the latter study, an analysis is presented that provides qualitative information on the flow structure predicted near the edge if a condition on the values of the diffusion constants is satisfied. In this case, the solution appears to be fairly insensitive to the residual free-stream turbulence levels needed with conventional numerical methods. The main specific result is that, depending on the diffusion model, the propagative solution can force turbulence toward definite and rather extreme anisotropy states at the edge (one- or two-component limit). This is not the case with the model of Daly and Harlow [Phys. Fluids 13, 2634 (1970)]; it may be one of the reasons why this "old" scheme is still the most widely used, even in recent Reynolds-stress-transport models. In addition, the analysis helps us to interpret some difficulties encountered in computing even very simple flows with Lumley's pressure-diffusion model [Adv. Appl. Mech. 18, 123 (1978)]. A new realizability condition, according to which the diffusion model should not globally become "anti-diffusive," is introduced, and a recalibration of Lumley's model satisfying this condition is performed using information drawn from the analysis.

  17. A pilot study on peritraumatic dissociation and coping styles as risk factors for posttraumatic stress, anxiety and depression in parents after their child's unexpected admission to a Pediatric Intensive Care Unit

    NARCIS (Netherlands)

    Bronner, Madelon B.; Kayser, Anne-Marie; Knoester, Hendrika; Bos, Albert P.; Last, Bob F.; Grootenhuis, Martha A.

    2009-01-01

    ABSTRACT: Aim: To study the prevalence of posttraumatic stress, anxiety and depression in parents three months after pediatric intensive care treatment of their child and examine if peritraumatic dissocation and coping styles are related to these mental health problems. METHODS: This is a

  18. On the effect of temperature on the threshold stress intensity factor of delayed hydride cracking in light water reactor fuel cladding

    Energy Technology Data Exchange (ETDEWEB)

    Holston, Anna-MariaAlvarez; Stjarnsater, Johan [Studsvik Nuclear AB, Nykoping (Sweden)

    2017-06-15

    Delayed hydride cracking (DHC) was first observed in pressure tubes in Canadian CANDU reactors. In light water reactors, DHC was not observed until the late 1990s in high-burnup boiling water reactor (BWR) fuel cladding. In recent years, the focus on DHC has resurfaced in light of the increased interest in the cladding integrity during interim conditions. In principle, all spent fuel in the wet pools has sufficient hydrogen content for DHC to operate below 300°C. It is therefore of importance to establish the critical parameters for DHC to operate. This work studies the threshold stress intensity factor (K{sub IH}) to initiate DHC as a function of temperature in Zry-4 for temperatures between 227°C and 315°C. The experimental technique used in this study was the pin-loading testing technique. To determine the K{sub IH}, an unloading method was used where the load was successively reduced in a stepwise manner until no cracking was observed during 24 hours. The results showed that there was moderate temperature behavior at lower temperatures. Around 300°C, there was a sharp increase in K{sub IH} indicating the upper temperature limit for DHC. The value for K{sub IH} at 227°C was determined to be 2.6 ± 0.3 MPa √m.

  19. On the effect of temperature on the threshold stress intensity factor of delayed hydride cracking in light water reactor fuel cladding

    Directory of Open Access Journals (Sweden)

    Anna-Maria Alvarez Holston

    2017-06-01

    Full Text Available Delayed hydride cracking (DHC was first observed in pressure tubes in Canadian CANDU reactors. In light water reactors, DHC was not observed until the late 1990s in high-burnup boiling water reactor (BWR fuel cladding. In recent years, the focus on DHC has resurfaced in light of the increased interest in the cladding integrity during interim conditions. In principle, all spent fuel in the wet pools has sufficient hydrogen content for DHC to operate below 300°C. It is therefore of importance to establish the critical parameters for DHC to operate. This work studies the threshold stress intensity factor (KIH to initiate DHC as a function of temperature in Zry-4 for temperatures between 227°C and 315°C. The experimental technique used in this study was the pin-loading testing technique. To determine the KIH, an unloading method was used where the load was successively reduced in a stepwise manner until no cracking was observed during 24 hours. The results showed that there was moderate temperature behavior at lower temperatures. Around 300°C, there was a sharp increase in KIH indicating the upper temperature limit for DHC. The value for KIH at 227°C was determined to be 2.6 ± 0.3 MPa √m.

  20. c-Fos expression in the supraoptic nucleus is the most intense during different durations of restraint water-immersion stress in the rat.

    Science.gov (United States)

    Zhang, Yu-Yu; Zhu, Wen-Xing; Cao, Guo-Hong; Cui, Xi-Yun; Ai, Hong-Bin

    2009-09-01

    Restraint water-immersion stress (RWIS) can induce anxiety, hypothermia, and severe vagally-mediated gastric dysfunction. The present work explored the effects of different durations of RWIS on neuronal activities of the forebrain by c-Fos expression in conscious rats exposed to RWIS for 0, 30, 60, 120, or 180 min. The peak of c-Fos induction was distinct for different forebrain regions. The most intense c-Fos induction was always observed in the supraoptic nucleus (SON), and then in the hypothalamic paraventricular nucleus (PVN), posterior cortical amygdaloid nucleus (PCoA), central amygdaloid nucleus (CeA), and medial prefrontal cortex (mPFC). Moreover, body temperature was reduced to the lowest degree after 60 min of RWIS, and the gastric lesions tended to gradually worsen with the prolonging of RWIS duration. These data strongly suggest that these nuclei participate in the organismal response to RWIS to different degrees, and may be involved in the hypothermia and gastric lesions induced by RWIS.

  1. The Effectiveness of Mindfulness-Based Stress Reduction on Perceived Pain Intensity and Quality of Life in Patients With Chronic Headache.

    Science.gov (United States)

    Bakhshani, Nour Mohammad; Amirani, Ahmadreza; Amirifard, Hamed; Shahrakipoor, Mahnaz

    2015-08-06

    The aim of this study was to determine the effectiveness of Mindfulness-Based Stress reduction (MBSR) on perceived pain intensity and quality of life in patients with chronic headache. Thus, forty patients based on the diagnosis of a neurologist and diagnostic criteria of the International Headache Society (IHS) for migraine and chronic tension-type headache were selected and randomly assigned to the intervention group and control group, respectively. The participants completed the Pain and quality of life (SF-36) questionnaire. The intervention group enrolled in an eight-week MBSR program that incorporated meditation and daily home practice, per week, session of 90-minutes. Results of covariance analysis with the elimination of the pre-test showed significantly improvement of pain and quality of life in the intervention group compared with the control group. The findings from this study revealed that MBSR can be used non-pharmacological intervention for improvement the quality of life and development of strategies to cope with pain in patients with chronic headache. And can be used in combination with other therapies such as pharmacotherapy.

  2. Effect of solvents on relation of intensities of bands of luminescence spectra of terbium and dysprosium ions in solutions of their complexes with acetoacetic ester

    International Nuclear Information System (INIS)

    Kononenko, L.I.; Bel'tyukova, S.V.; Meshkova, S.B.; Kravchenko, T.B.; Poluehktov, N.S.

    1978-01-01

    An investigation is made of the effect of different solvents on the ratio of the intensity of luminescence spectrum bands of terbium and dysprosium ions, corresponding and not corresponding to ''supersensitive'' transitions in complex compounds with acetoacetic ether. A dependence is established between these values and the dielectric constant of the solvent, and also parallels in their changes, which indicate the similar manifestation of the effect of solvents in both elements. A correlation is observed between ratios of the intensity of luminescence spectrum bands and values of forces of neodymium complex absorption band oscillators in different solvents

  3. Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 This practice covers the preparation and use of Mattsson's solution of pH 7.2 as an accelerated stress-corrosion cracking test environment for brasses (copper-zinc base alloys). The variables (to the extent that these are known at present) that require control are described together with possible means for controlling and standardizing these variables. 1.2 This practice is recommended only for brasses (copper-zinc base alloys). The use of this test environment is not recommended for other copper alloys since the results may be erroneous, providing completely misleading rankings. This is particularly true of alloys containing aluminum or nickel as deliberate alloying additions. 1.3 This practice is intended primarily where the test objective is to determine the relative stress-corrosion cracking susceptibility of different brasses under the same or different stress conditions or to determine the absolute degree of stress corrosion cracking susceptibility, if any, of a particular brass or brass component ...

  4. The effects of aerobic exercise training at two different intensities in obesity and type 2 diabetes: implications for oxidative stress, low-grade inflammation and nitric oxide production.

    Science.gov (United States)

    Krause, Mauricio; Rodrigues-Krause, Josianne; O'Hagan, Ciara; Medlow, Paul; Davison, Gareth; Susta, Davide; Boreham, Colin; Newsholme, Philip; O'Donnell, Mark; Murphy, Colin; De Vito, Giuseppe

    2014-02-01

    To investigate the effect of 16 weeks of aerobic training performed at two different intensities on nitric oxide (tNOx) availability and iNOS/nNOS expression, oxidative stress (OS) and inflammation in obese humans with or without type 2 diabetes mellitus (T2DM). Twenty-five sedentary, obese (BMI > 30 kg/m2) males (52.8 ± 7.2 years); 12 controls versus 13 T2DM were randomly allocated to four groups that exercised for 30 min, three times per week either at low (Fat-Max; 30-40% VO(2max)) or moderate (T(vent); 55-65 % VO(2max)) intensity. Before and after training, blood and muscle samples (v. lateralis) were collected. Baseline erythrocyte glutathione was lower (21.8 ± 2.8 vs. 32.7 ± 4.4 nmol/ml) and plasma protein oxidative damage and IL-6 were higher in T2DM (141.7 ± 52.1 vs. 75.5 ± 41.6 nmol/ml). Plasma catalase increased in T2DM after T(vent) training (from 0.98 ± 0.22 to 1.96 ± 0.3 nmol/min/ml). T2DM groups demonstrated evidence of oxidative damage in response to training (elevated protein carbonyls). Baseline serum tNOx were higher in controls than T2DM (18.68 ± 2.78 vs. 12.34 ± 3.56 μmol/l). Training at T(vent) increased muscle nNOS and tNOx in the control group only. Pre-training muscle nNOS was higher in controls than in T2DMs, while the opposite was found for iNOS. No differences were found after training for plasma inflammatory markers. Exercise training did not change body composition or aerobic fitness, but improved OS markers, especially when performed at T(vent). Non-diabetics responded to T(vent) training by increasing muscle nNOS expression and tNOx levels in skeletal muscle while these parameters did not change in T2DM, perhaps due to higher insulin resistance (unchanged after intervention).

  5. Effect of solution temperature, light intensity and light in combination with sunlight using mirror duct on growth of leaf lettuce (Lactuca savtiva L. cv. 'Greenwave')

    International Nuclear Information System (INIS)

    Shimizu, H.; Kushida, M.; Fujinuma, W.; Sekine, M.; Kaiho, K.; Arai, H.; Shibusawa, S.

    2004-01-01

    Leaf lettuce crops (Lactuca sativa L. cv. 'Greenwave') were grown in a plant production system using a Mirror Duct which intensified sunlight and transferred it to the inside of buildings. This system was expected to reduce the operational energy and lighting cost. The experiments were conducted under four photosynthetic photon flux densities (PPF) of 140,160, 180, and 200 micro mol mE-2 sE-1, in two light conditions, fluorescent light only and fluorescent light plus sunlight transferred with the Mirror Duct, and were repeated five times in total from August 2002 to July 2003. Five different solution temperatures were finally obtained through all the experiments due to temperature changes inside the experiment facility. Variance was analyzed to estimate the effect of these environmental factors on the growth of leaf lettuce. It was found that the fresh weight of leaf lettuce increased as PPF increased and the rate of increase of weight was 0.6 to 1.0 g per unit PPF in both 17.4 deg C and 23.5 deg C solution temperatures; the solution temperature had a significant effect upon the fresh weight; and a difference in fresh weight at harvest of between 40 and 60 g was observed between 17.4 deg C and 23.5 deg C solution temperatures. The light containing 10% sunlight was not effective for increasing fresh weight at harvest compared to the fluorescent lamp

  6. The elastic T-stress for slightly curved or kinked cracks

    DEFF Research Database (Denmark)

    Li, Dong-Feng; Li, Chen-Feng; Qing, Hai

    2010-01-01

    This work presents a solution for the elastic T-stress at the tip of a slightly curved or kinked crack based on a perturbation approach. Compared to other exact or numerical solutions the present solution is accurate for considerable deviations from straightness. The T-stress variation as crack...... extends along a curved trajectory is subsequently examined. It is predicted that T-stress always keeps negative during crack extension when the crack has an initial negative T-stress. In the case of a positive T-stress and non-zero first and second stress intensity factors initially accompanying the crack......, the T-stress is not positive with increasing the extension length until a threshold is exceeded. Based on directional stability criterion with respect to the sign of the T-stress, this result implies that for a straight crack with a positive T-stress, the crack extension path will not turn immediately...

  7. Identification of genes potentially involved in solute stress response in Sphingomonas wittichii RW1 by transposon mutant recovery

    Directory of Open Access Journals (Sweden)

    Edith eCoronado

    2014-11-01

    Full Text Available The term water stress refers to the effects of low water availability on microbial growth and physiology. Water availability has been proposed as a major constraint for the use of microorganisms in contaminated sites with the purpose of bioremediation. Sphingomonas wittichii RW1 is a bacterium capable of degrading the xenobiotic compounds dibenzofuran and dibenzo-p-dioxin, and has potential to be used for targeted bioremediation. The aim of the current work was to identify genes implicated in water stress in RW1 by means of transposon mutagenesis and mutant growth experiments. Conditions of low water potential were mimicked by adding NaCl to the growth media. Three different mutant selection or separation method were tested, which, however recovered different mutants. Recovered transposon mutants with poorer growth under salt-induced water stress carried insertions in genes involved in proline and glutamate biosynthesis, and further in a gene putatively involved in aromatic compound catabolism. Transposon mutants growing poorer on medium with lowered water potential also included ones that had insertions in genes involved in more general functions such as transcriptional regulation, elongation factor, cell division protein, RNA polymerase β or an aconitase.

  8. Numerical modeling of solute transport in a sand tank physical model under varying hydraulic gradient and hydrological stresses

    Science.gov (United States)

    Atlabachew, Abunu; Shu, Longcang; Wu, Peipeng; Zhang, Yongjie; Xu, Yang

    2018-03-01

    This laboratory study improves the understanding of the impacts of horizontal hydraulic gradient, artificial recharge, and groundwater pumping on solute transport through aquifers. Nine experiments and numerical simulations were carried out using a sand tank. The variable-density groundwater flow and sodium chloride transport were simulated using the three-dimensional numerical model SEAWAT. Numerical modelling results successfully reproduced heads and concentrations observed in the sand tank. A higher horizontal hydraulic gradient enhanced the migration of sodium chloride, particularly in the groundwater flow direction. The application of constant artificial recharge increased the spread of the sodium chloride plume in both the longitudinal and lateral directions. In addition, groundwater pumping accelerated spreading of the sodium chloride plume towards the pumping well. Both higher hydraulic gradient and pumping rate generated oval-shaped plumes in the horizontal plane. However, the artificial recharge process produced stretched plumes. These effects of artificial recharge and groundwater pumping were greater under higher hydraulic gradient. The concentration breakthrough curves indicated that emerging solutions never attained the concentration of the originally injected solution. This is probably because of sorption of sodium chloride onto the silica sand and/or the exchange of sodium chloride between the mobile and immobile liquid domains. The fingering and protruding plume shapes in the numerical models constitute instability zones produced by buoyancy-driven flow. Overall, the results have substantiated the influences of hydraulic gradient, boundary condition, artificial recharge, pumping rate and density differences on solute transport through a homogeneous unconfined aquifer. The implications of these findings are important for managing liquid wastes.

  9. Carbohydrate solutions and contribute to the improvement of physical performance during a high-intensity and long-lasting physical exercise: evaluation of a health claim pursuant to Article 13(5) of Regulation (EC) No 1924/2006

    DEFF Research Database (Denmark)

    Sjödin, Anders Mikael

    2018-01-01

    Following an application from Specialised Nutrition Europe (SNE), submitted for authorisation of a health claim pursuant to Article 13(5) of Regulation (EC) No 1924/2006 via the Competent Authority of France, the EFSA Panel on Dietetic Products, Nutrition and Allergies (NDA) was asked to deliver...... an opinion on the scientific substantiation of a health claim related to carbohydrate solutions and contribute to the improvement of physical performance during a high‐intensity and long‐lasting physical exercise. The scope of the application was proposed to fall under a health claim based on newly developed...... effect. The claimed effect proposed by the applicant is ‘contribute to the improvement of physical performance during a high‐intensity and long‐lasting physical exercise’, which is considered by the Panel as a beneficial physiological effect. The Panel concludes that a cause and effect relationship has...

  10. Measurements of emission rates of hydrocarbons from sunflower as a function of temperature, light intensity and stress (ozone levels); Bestimmung von Emissionsraten pflanzlicher Kohlenwasserstoffe bei Sonnenblumen in Abhaengigkeit von Temperatur, Lichtintensitaet und Stress, insbesondere von der Belastung mit Ozon

    Energy Technology Data Exchange (ETDEWEB)

    Schuh, G.; Wildt, J.; Kley, D.

    1996-08-01

    The emission rates of isoprene, mono- and sesquiterpenes from sunflower (Helianthus annuus L. cv. giganteus) were determined in an environmental chamber, a continuously stirred tank reactor. {alpha}-pinene, {beta}-caryophyllene and two oxygenated compounds were emitted. The emission rates of all terpenes increased exponentially with temperature. Substance specific differences of the rate of increase of the emission rates were observed. For all substances the dependence of their emission rates on temperature increased with increasing light intensity. Increasing lightflux resulted in an increase of the emission rates for all substances. The raise of emission rates with lightflux was dependent on temperature and increased with increasing temperature. During periods without plant stress the emission rates exhibited a good correlation with the rate of transpiration as well as with the rate of net photosynthesis. Sunflowers emitted higher amounts of terpenes when they were stressed by mechanical, wounding and ozone treatment as well as nutrient- or water deficiency. The emission rates increased by a factor of 5-300. Exposure with ozone had an effect on hydrocarbon emission rates with a delay-time. 3-4 h after exposure with 25-120 ppb ozone the emission rates increased by factor of 5-100. This increase was only observed on the first day of exposure. Nutrient deficiency resulted in an increase of emission rates by a factor of 10-300. In situations of mechanical, wounding and ozone stress, substance specific changes in the emission spectrum were observed. A model was developed to explain the observed phenomena. The main pathway of ozone loss in the chamber is caused by the uptake through the stomata of the plants. However, up to 50% of the ozone loss must be explained by other processes indirectly caused by the plants. (orig./MG) [Deutsch] In Laborversuchen wurden Emissionsraten biogener Kohlenwasserstoffe von Sonnenblumen gemessen. Die groessten Emissionsraten wiesen die

  11. A STUDY OF THE PRESSURE SOLUTION AND DEFORMATION OF QUARTZ CRYSTALS AT HIGH pH AND UNDER HIGH STRESS

    Directory of Open Access Journals (Sweden)

    JUNG-HAE CHOI

    2013-02-01

    Full Text Available Bentonite is generally used as a buffer material in high-level radioactive waste disposal facilities and consists of 50% quartz by weight. Quartz strongly affects the behavior of bentonite over very long periods. For this reason, quartz dissolution experiment was performed under high-pressure and high-alkalinity conditions based on the conditions found in a high-level radioactive waste disposal facility located deep underground. In this study, two quartz dissolution experiments were conducted on 1 quartz beads under low-pressure and high-alkalinity conditions and 2 a single quartz crystal under high-pressure and high-alkalinity conditions. Following the experiments, a confocal laser scanning microscope (CLSM was used to observe the surfaces of experimental samples. Numerical analyses using the finite element method (FEM were also performed to quantify the deformation of contact area. Quartz dissolution was observed in both experiments. This deformation was due to a concentrated compressive stress field, as indicated by the quartz deformation of the contact area through the FEM analysis. According to the numerical results, a high compressive stress field acted upon the neighboring contact area, which showed a rapid dissolution rate compared to other areas of the sample.

  12. Stress wave propagation in thin long-fiber carbon/epoxy composite panel. Numerical and experimental solutions

    Directory of Open Access Journals (Sweden)

    Kroupa T.

    2007-10-01

    Full Text Available The article deals with experimental and numerical analysis of stress wave propagation in a thin long fiber carbon/epoxy composite material. Experiments were performed on in-plane loaded square composite panels with dimensions 501mm x 501mm x 2:2 mm. The panels have several fiber orientations (0°, 30°, 60° and 90° measured from the loaded edge. They were loaded by in-plane impact of steel sphere. The impact area was on the edge, exactly 150mm from top left corners corner of the panels. The loading force was approximated by atime dependent function. Its shape was obtained from three dimensional contact analysis, which was performed on smaller area of panel. The function was used in further plane stress analysis of the whole panels. The comparison of the numerical and experimental results was executed. An attempt at determination of velocity of propagation of Rayleigh waves on the loaded edge was performed and the results are discussed in the paper. Further directions of the research are proposed.

  13. Contribution of solution pH and buffer capacity to suppress intergranular stress corrosion cracking of sensitized type 304 stainless steel at 95 C

    International Nuclear Information System (INIS)

    Zhang, S.; Shibata, T.; Haruna, T.

    1999-01-01

    Controlling pH of high-temperature water to ∼pH 7 at 300 C by adding lithium hydroxide (LiOH) into the coolant system of a pressurized water reactor (PWR) successfully has been mitigating the corrosion of PWR component materials. The effects of solution pH and buffer capacity on intergranular stress corrosion cracking (IGSCC) of sensitized type 304 stainless steel ([SS] UNS S30400) was examined at 95 C by slow strain rate technique (SSRT) with an in-situ cracking observation system. It was found that an increase in solution pH or buffer capacity increased crack initiation time and decreased mean crack initiation frequency, but exerted almost no effect on crack propagation. This inhibition effect on IGSCC initiation was explained as resulting from a retarding effect of solution pH and buffer capacity on the decrease in pH at crack nuclei caused by the hydrolysis of metal ions dissolved when the passive film was ruptured by strain in SSRT

  14. The feature of the focal mechanism solutions and tectonic stress field around the focus of Zaduo earthquake (Ms 6.3) in eastern Tibet

    Science.gov (United States)

    Yang, Y.; Zeng, Z.; Shuang, X.; Li, X.

    2017-12-01

    On 17th October, 2016, an earthquake of Ms6.3 occurred in Zaduo County, Qinghai Province (32.9°N, 95.0°E), 159 km away from the epicenter of Yushu Ms7.3 earthquake in 2011. The earthquake is located in the eastern Tibet Plateau and the north region of Eastern Himalayan Syntaxis. Using the broadband seismic waveform data form regional networks, we determined the focal mechanism solutions (FMSs) of 83 earthquakes (M>3.5) occurred in Zaduo and its adjacent areas from 2009 to 2017. We also collected another 63 published FMSs and then inversed the current tectonic stress field in study region using the damped linear inversion method. The results show that the Zaduo earthquake is a normal oblique earthquake. The FMSs in our study region are mainly in strike-slip and normal fault patterns. The strike-slip earthquakes are mainly distributed in Yushu-Ganzi, Zaduo and Yanshiping fault zones, and the normal faulting events occurred in Nu Jiang fault zone and Nierong County and its vicinity, the south and southwest of the study areas. The tectonic stress field results indicate that the stress distribution in the north and east of the study region changes homogeneously and slowly. From west to east, the σ1 gradually changes from NNE to NE direction, and the σ3 varies from NWW to NW direction. Both the maximum (σ1) and minimum (σ3) principal stress axes in the study area are nearly horizontal, except in the Nu Jiang fault zone and its vicinity, the south of the study area, which is in a normal faulting stress regime (σ1 is vertical and σ3 is horizontal). The localized normal faulting stress field in the south area, which is almost limited in a semicircle, indicates that a high pressure and low viscosity body with low S-wave velocity and high conductivity might exists beneath the anomaly area. And there may be another semicircle abnormal area beyond the south of the study region. Waveform data for this study are provided by Data Management Centre of China National Seismic

  15. Radiology clinical synopsis: a simple solution for obtaining an adequate clinical history for the accurate reporting of imaging studies on patients in intensive care units

    International Nuclear Information System (INIS)

    Cohen, Mervyn D.; Alam, Khurshaid

    2005-01-01

    Lack of clinical history on radiology requisitions is a universal problem. We describe a simple Web-based system that readily provides radiology-relevant clinical history to the radiologist reading radiographs of intensive care unit (ICU) patients. Along with the relevant history, which includes primary and secondary diagnoses, disease progression and complications, the system provides the patient's name, record number and hospital location. This information is immediately available to reporting radiologists. New clinical information is immediately entered on-line by the radiologists as they are reviewing images. After patient discharge, the data are stored and immediately available if the patient is readmitted. The system has been in routine clinical use in our hospital for nearly 2 years. (orig.)

  16. Mechanistic model of stress corrosion cracking (scc) of carbon steel in acidic solution with the presence of H2s

    International Nuclear Information System (INIS)

    Asmara, Y P; Juliawati, A; Sulaiman, A; Jamiluddin

    2013-01-01

    In oil and gas industrial environments, H 2 S gas is one of the corrosive species which should be a main concern in designing infrastructure made of carbon steel. Combination between the corrosive environment and stress condition will cause degradation of carbon steel increase unpredictably due to their simultaneous effects. This paper will design a model that involves electrochemical and mechanical theories to study crack growth rate under presence of H 2 S gas. Combination crack and corrosion propagation of carbon steel, with different hydrogen concentration has been investigated. The results indicated that high concentration of hydrogen ions showed a higher crack propagation rate. The comparison between corrosion prediction models and corrosion model developed by researchers used to verify the model accuracy showed a good agreement

  17. Standard test method for determining whether gas-leak-detector fluid solutions can cause stress corrosion cracking of brass alloys

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 This test method covers an accelerated test method for evaluating the tendency of gas leak detection fluids (LDFs) to cause stress corrosion cracking (SCC) of brass components in compressed gas service. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  18. The optimal exercise intensity for the unbiased comparison of thermoregulatory responses between groups unmatched for body size during uncompensable heat stress.

    Science.gov (United States)

    Ravanelli, Nicholas; Cramer, Matthew; Imbeault, Pascal; Jay, Ollie

    2017-03-01

    We sought to identify the appropriate exercise intensity for unbiased comparisons of changes in rectal temperature (ΔT re ) and local sweat rates (LSR) between groups unmatched for body size during uncompensable heat stress. Sixteen males vastly different in body morphology were separated into two equal groups [small (SM): 65.8 ± 6.2 kg, 1.8 ± 0.1 m 2 ; large (LG): 100.0 ± 13.1 kg, 2.3 ± 0.1 m 2 ], but matched for sudomotor thermosensitivity (SM: 1.3 ± 0.6; LG: 1.1 ± 0.4 mg·cm -2 ·min -1 ·°C -1 ). The maximum potential for evaporation (E max ) for each participant was assessed using an incremental humidity protocol. On separate occasions, participants then completed 60 min of cycling in a 35°C and 70% RH environment at (1) 50% of VO 2max , (2) a heat production (H prod ) of 520 W, (3) H prod relative to mass (6 W·kg -1 ), and (4) H prod relative to mass above E max (3 W·kg -1 >E max ). E max was similar between LG (347 ± 39 W, 154 ± 15 W·m -2 ) and SM (313 ± 63 W, 176 ± 34 W·m -2 , P  >   0.12). ΔT re was greater in SM compared to LG at 520 W (SM: 1.5 ± 0.5; LG 0.8 ± 0.3°C, P  E max (SM: 1.4 ± 0.5; LG 1.3 ± 0.4°C, P  =   0.99). LSR was similar between LG and SM irrespective of condition, suggesting maximum LSR was attained (SM: 1.10 ± 0.23; LG: 1.07 ± 0.35 mg·cm -2 ·min -1 , P  =   0.50). In conclusion, systematic differences in ΔT re and LSR between groups unmatched for body size during uncompensable heat stress can be avoided by a fixed H prod in W·kg -1 or W·kg -1 >E max . © 2017 The Authors. Physiological Reports published by Wiley Periodicals, Inc. on behalf of The Physiological Society and the American Physiological Society.

  19. Bleeding and pneumonia in intensive care patients given ranitidine and sucralfate for prevention of stress ulcer: meta-analysis of randomised controlled trials

    Science.gov (United States)

    Messori, A; Trippoli, S; Vaiani, M; Gorini, M; Corrado, A

    2000-01-01

    Objectives To determine the effectiveness of ranitidine and sucralfate in the prevention of stress ulcer in critical patients and to assess if these treatments affect the risk of nosocomial pneumonia. Design Published studies retrieved through Medline and other databases. Five meta-analyses evaluated effectiveness in terms of bleeding rates (A: ranitidine v placebo; B: sucralfate v placebo) and infectious complications in terms of incidence of nosocomial pneumonia (C: ranitidine v placebo; D: sucralfate v placebo; E: ranitidine v sucralfate). Trial quality was determined with an empirical ad hoc procedure. Main outcome measures Rates of clinically important gastrointestinal bleeding and nosocomial pneumonia (compared between the two study arms and expressed with odds ratios specific for individual studies and meta-analytic summary odds ratios). Results Meta-analysis A (five studies) comprised 398 patients; meta-analysis C (three studies) comprised 311 patients; meta-analysis D (two studies) comprised 226 patients: and meta-analysis E (eight studies) comprised 1825 patients. Meta-analysis B was not carried out as the literature search selected only one clinical trial. In meta-analysis A ranitidine was found to have the same effectiveness as placebo (odds ratio of bleeding 0.72, 95% confidence interval 0.30 to 1.70, P=0.46). In placebo controlled studies (meta-analyses C and D) ranitidine and sucralfate had no influence on the incidence of nosocomial pneumonia. In comparison with sucralfate, ranitidine significantly increased the incidence of nosocomial pneumonia (meta-analysis E: 1.35, 1.07 to 1.70, P=0.012). The mean quality score in the four analyses (on a 0 to 10 scale) ranged from 5.6 in meta-analysis E to 6.6 in meta-analysis A. Conclusions Ranitidine is ineffective in the prevention of gastrointestinal bleeding in patients in intensive care and might increase the risk of pneumonia. Studies on sucralfate do not provide conclusive results. These findings are

  20. Assessment of copper resistance to stress-corrosion cracking in nitrite solutions by means of joint analysis of acoustic emission measurements, deformation diagrams, qualitative and quantitative fractography, and non-linear fracture mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Khanzhin, V.G.; Nikulin, S.A. [Moscow State Inst. of Steel and Alloys (Russian Federation)

    2005-06-01

    A study of stress-corrosion cracking (SCC) of copper in 0.1M NaNO{sub 2} aqueous solution is presented. The fracture kinetics was monitored by measuring the acoustic emission (AE) signals. Macro- and micro-fractography analysis, using scanning electron microscopy (SEM), was employed to investigate the fracture mechanisms. Estimates of stress intensity factor, KI, and J-integral were derived in order to assess the resistance of copper to stress corrosion cracking. Two kinds of SCC tests under continuous circulation of the corrosive solution were employed in the present study: 1. Constant extension rate (2x10{sup -6}/s) tests on pre-cracked, middle tension (MT) panel specimens. 2. Tests on pre-cracked, compact tension (CT) specimens at a fixed (by a fixing bolt) opening of the crack walls ({delta} = 0.3 mm, K{sub i} = 27 MPax{radical}m). The time base for these tests was about two months. After the completion of the SCC test, the CT specimen was additionally tested, under a constant-rate (0.02 mm/s) off-center extension. In the both kinds of tests, the SCC fracture kinetics is found to exhibit two typical stages: Stage 1: SCC initiation stage (after a certain incubation period, T{sub i}, measured to be T{sub i} {approx_equal} 3-4 hours for MT specimens under constant extension, the corresponding stress was {sigma} {approx_equal} 40-70 MPa, and T{sub i} {approx_equal} 200 hours for CT specimens under a fixed crack wall opening). Stage 2: Active fracture process (SCC macro-fracture) distinguished by strong AE pulses (which are registered after time T{sub 2} {approx_equal} 8 hours for MT specimens and T{sub 2} {approx_equal} 800 hours for CT specimens). Fractography analysis has shown that the zone of SCC fracture in MT specimens extends to approximately 1,500 {mu}m. A 400-700 {mu}m deep zone of brittle transgranular fracture, which included small areas showing characteristic SCC 'striations', was observed adjacent to the fatigue pre-crack area. At higher

  1. Effects of dissolved calcium and magnesium ions on lead-induced stress corrosion cracking susceptibility of nuclear steam generator tubing alloy in high temperature crevice solutions

    International Nuclear Information System (INIS)

    Lu, B.T.; Tian, L.P.; Zhu, R.K.; Luo, J.L.; Lu, Y.C.

    2011-01-01

    The effects of Ca 2+ and Mg 2+ ions on the stress corrosion cracking (SCC) susceptibility of UNS N08800 are investigated using constant extension rate tensile (CERT) tests at 300 o C in simulated crevice chemistries. The presence of lead contamination in the crevice chemistries increases significantly the SCC susceptibility of the alloy. The lead-assisted SCC (PbSCC) susceptibility is reduced markedly by the addition of Ca 2+ and Mg 2+ ions into the solution and this mitigating effect is enhanced by increasing the total concentration of Ca 2+ + Mg 2+ . The CERT test results are consistent with the types of fracture surfaces shown by Scanning Electron Microscopy (SEM). There is a reasonable correlation between the SCC susceptibility and the donor densities in the anodic films in accord with the role of lead-induced passivity degradation in PbSCC.

  2. Middle Eastern solutions

    International Nuclear Information System (INIS)

    Boersma, M.

    2001-01-01

    The need to consider the Middle East as a group of distinct countries and not as one single market and to tailor the services offered by companies is stressed. The cultures, political and social conditions, forms of the oil and gas industry in the countries making up the Middle East and their technology requirements are different and vary widely. The approach taken by Shell Global Solutions to these differences is described and illustrated with Shell's experiences in Oman and Saudi Arabia. Shell has found that Omanis are keen to work in their oil and gas industry, and to protect their country's natural environment. Saudi also have intense pride in their oil industry and here Shell supports refinery operators reduce costs while maintaining strict quality control. Shell has been selected to help Saudi Arabia develop its natural gas reserves; as part of the Core Venture 3 project, Shell will build a power desalination plant

  3. Effect of Low-Temperature Environment on Stress Corrosion Cracking Behavior of X80 Pipeline Steel in Simulated Alkaline Soil Solution

    Science.gov (United States)

    Xie, Fei; Wang, Dan; Wu, Ming; Yu, Chengxiang; Sun, Dongxu; Yang, Xu; Xu, Changhao

    2018-04-01

    The stress corrosion cracking (SCC) of X80 pipeline steel in simulated alkaline soil solution under different temperatures was investigated by slow-strain-rate testing, scanning electron microscopy and energy-dispersive spectroscopy. Results showed that the fracture was transgranular and brittle at 273 K to 278 K (0 °C to 5 °C), and the metal surface was dissolved by a large number of chloride ions. Furthermore, hydrogen embrittlement was caused by the hydrogen atom extended to the high-stress region. The fracture process was controlled by hydrogen-induced cracking, and SCC was highly sensitive at this stage. At 288 K to 298 K (15 °C to 25 °C), the fracture morphology was attributed to the mixed mode of ductile and brittle fractures, the fracture process was controlled by the mechanism of hydrogen-induced cracking and anodic dissolution, and the susceptibility to SCC decreased. When the temperature reached 308 K to 318 K (35 °C to 45 °C), the fracture was mainly intergranular and ductile, the fracture process was controlled by anodic dissolution, and SCC sensitivity was the smallest in this temperature range.

  4. Effect of Strength and Microstructure on Stress Corrosion Cracking Behavior and Mechanism of X80 Pipeline Steel in High pH Carbonate/Bicarbonate Solution

    Science.gov (United States)

    Zhu, Min; Du, Cuiwei; Li, Xiaogang; Liu, Zhiyong; Wang, Shengrong; Zhao, Tianliang; Jia, Jinghuan

    2014-04-01

    The stress corrosion cracking (SCC) behaviors and mechanisms of X80 pipeline steels with different strength and microstructure in high pH carbonate/bicarbonate solution were investigated by slow strain rate testing and electrochemical test. The results showed that the cracking mode of low strength X80 steel composed of bulky polygonal ferrite and granular bainite in high pH solution was intergranular (IGSCC), and the SCC mechanism was anodic dissolution (AD). While the mixed cracking mode of high strength X80 steel consisted of fine acicular ferrite and granular bainite was intergranular (IGSCC) in the early stage, and transgranular (TGSCC) in the later stage. The decrease of pH value of crack tip was probably the key reason for the occurrence of TGSCC. The SCC mechanism may be a mixed mode of AD and hydrogen embrittlement (HE), and the HE mechanism may play a significant role in the deep crack propagation at the later stage. The cracking modes and SCC mechanisms of the two X80 steels were associated with its microstructure and strength.

  5. Standard test method for evaluating stress-corrosion cracking of stainless alloys with different nickel content in boiling acidified sodium chloride solution

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2000-01-01

    1.1 This test method describes a procedure for conducting stress-corrosion cracking tests in an acidified boiling sodium chloride solution. This test method is performed in 25% (by mass ) sodium chloride acidified to pH 1.5 with phosphoric acid. This test method is concerned primarily with the test solution and glassware, although a specific style of U-bend test specimen is suggested. 1.2 This test method is designed to provide better correlation with chemical process industry experience for stainless steels than the more severe boiling magnesium chloride test of Practice G36. Some stainless steels which have provided satisfactory service in many environments readily crack in Practice G36, but have not cracked during interlaboratory testing using this sodium chloride test method. 1.3 This boiling sodium chloride test method was used in an interlaboratory test program to evaluate wrought stainless steels, including duplex (ferrite-austenite) stainless and an alloy with up to about 33% nickel. It may also b...

  6. Stress corrosion inhibitors for type 18-10 stainless steels with low carbon content in hot and concentrated solutions of MgCl2. Study of some inorganic iodides

    International Nuclear Information System (INIS)

    Pinard, J.-L.

    1974-01-01

    Stress corrosion inhibitors for type Z2CN18-10 austenitic stainless steels with low carbon content in a solution of Cl 2 Mg at 105 deg C were investigated. It was established that iodides are the most adequate corrosion inhibitors because they react simultaneously upon the three main components of the alloy (Fe, Ni, Cr). A difference of behavior between I 2 Mg and the other iodides was observed (in electrochemistry and in simple stress corrosion experiments) and the influence of the metallic cation associated to I - was studied. The formation of the superficial film and the phenomena liable to occur at the interface film-corrosive solution were examined: film growth in MgCl 2 ; influence of certain substances added to the solution. A mechanism of inhibition by I - is suggested. It is similar to the mechanism proposed by BERGEN for the stress corrosion cracking by Cl - [fr

  7. Stress corrosion crack growth studies on nitrogen added AISI type 316 stainless steel and its weld metal in boiling acidified sodium chloride solution using the fracture mechanics approach

    Energy Technology Data Exchange (ETDEWEB)

    Shaikh, H.; George, G.; Khatak, H.S. [Indira Gandhi Centre for Atomic Research, Kalpakkam (India). Div. of Metallurgy; Schneider, F.; Mummert, K. [Institut fuer Festkoerper- und Werkstofforschung Dresden e.V. (Germany). Inst. fuer Metallische Werkstoffe

    2000-10-01

    Compact tension specimens of nitrogen-added AISI type 316 austenitic stainless steel and its weld metal were subject to stress corrosion cracking (SCC) testing in a boiling solution containing 5 M sodium chloride + 0.15 M sodium sulphate + 2.5 ml/l hydrochloric acid solution using the constant extension rate testing (CERT) technique. The extension rate of testing was 10 microns per hour. The threshold values of stress intensify factor (K{sub ISCC}) and J-integral (J{sub ISCC}) were taken as those values of K{sub I} and J{sub I} at which about 25 microns of SCC crack growth was observed. These threshold values were about four times higher and plateau crack growth rates (PCGR) were nearly one order of magnitude lower for the base metal vis-a-vis the weld metal. Fractographic observations indicated failure by transgranular SCC (TGSCC) of austenite in both the base and weld metal. No stress-assisted dissolution of delta-ferrite or its interface with austenite, was observed. (orig.) [German] CT-Proben von Grund- und Schweissnahtwerkstoff des stickstoffhaltigen Stahles AISI 316 LN wurden Spannungsrisskorrosionstests in siedender chloridhaltiger Loesung (5 M Natriumchlorid/0,15 M Natriumsulfat/0,03 M Salzsaeure) unterzogen. Die Tests erfolgten bei konstanter Dehnrate (CERT-Test) von 10 {mu}m/h. Als Schwellwerte der Initiierung von Spannungsrisskorrosion K{sub ISCC} und I{sub ISCC} wurden die Werte des Spannungsintensitaetsfaktors K{sub I} und des J-Integrals J{sub I} ermittelt, bei denen ein Risswachstum von 25 {mu}m auftrat. Dabei wies der Grundwerkstoff 4-fach hoehere Schwellwerte K{sub ISCC} und J{sub ISCC} auf als der Schweissnahtwerkstoff. Auch die Risswachstumsraten im Plateaubereich der Risswachstumsrate-Spannungsintensitaetskruven waren am Grundwerkstoff um eine Groessenordnung geringer als am Schweissnahtwerkstoff. Die fraktorgrahischen Untersuchungen zeigten an beiden Materialien Schaedigung durch transkristalline Spannungsrisskorrosion. Eine

  8. Stress corrosion of Zircaloy-4. Fracture mechanics study of the intergranular - transgranular transition

    International Nuclear Information System (INIS)

    Farina, Silvia B.; Duffo, Gustavo S.

    2003-01-01

    Stress corrosion cracking susceptibility of Zircaloy-4 wires was studied in 1M NaCl, 1M KBr and 1M KI aqueous solutions, and in iodine alcoholic solutions. In all cases, intergranular attack preceded transgranular propagation. It is generally accepted that the intergranular-transgranular transition occurs when a critical value of the stress intensity factor is reached. In the present work it was confirmed that the transition from intergranular to transgranular propagation cracking in Zircaloy-4 wires also occurs when a critical value of the stress intensity factor is reached. This critical stress intensity factor in wire samples is independent of the solution tested and close to 10 MPa.m-1/2. This value is in good agreement with those reported in the literature measured by different techniques. (author)

  9. Data-intensive science

    CERN Document Server

    Critchlow, Terence

    2013-01-01

    Data-intensive science has the potential to transform scientific research and quickly translate scientific progress into complete solutions, policies, and economic success. But this collaborative science is still lacking the effective access and exchange of knowledge among scientists, researchers, and policy makers across a range of disciplines. Bringing together leaders from multiple scientific disciplines, Data-Intensive Science shows how a comprehensive integration of various techniques and technological advances can effectively harness the vast amount of data being generated and significan

  10. Associations between sedation, delirium and post-traumatic stress disorder and their impact on quality of life and memories following discharge from an intensive care unit.

    Science.gov (United States)

    Svenningsen, Helle

    2013-04-01

    In the intensive care units (ICUs) sedation strategies have changed in the past decade towards less sedation and daily wake-up calls. Recent studies indicate that no sedation (after intubation) is most beneficial for patients. A smaller number of these patients have been assessed for post-traumatic stress disorder (PTSD) after ICU discharge, but none of them were assessed for delirium while in the ICU. In other studies, delirium in the ICU is described as distressing for the patients and increasing morbidity, i.e. dementia after discharge and mortality. The associations between sedation, delirium, and PTSD have not previous been described. The aim of this PhD study was to investigate: 1) how sedation is associated with delirium in the ICU, 2) the consequences of delirium in relation to PTSD, anxiety, and depression, 3) the consequences of delirium for the patients' memories from ICU and the health-related quality of life after discharge. In a prospective observation study with patients admitted a minimum of 48 hours to the ICUs in Aarhus or Hillerød, we included all patients aged > 17 years. Non-Danish-speaking, patients transferred from other ICUs and patients with brain injury that made delirium-assessment impossible were excluded. Patients were interviewed face-to-face after 1 week, and at 2 months and 6 months by telephone using six different questionnaires. Among 3,066 patients admitted to the ICUs, 942 fulfilled the inclusion criteria. Primarily due to the inability to test for delirium, 302 patients were later excluded. Of the remaining 640 patients, 65% were delirious on 1 or more days. Fluctuations in sedation levels increased the risk of delirium statistically significantly with or without adjustments for age, gender, severity of illness, surgical/medical patient, or ICU site. After 2 months vs. 6 months, 297 patients vs. 248 patients were interviewed. PTSD was found in 7% vs. 5%, anxiety in 6% vs. 4%, and depression in 10% at both interviews. Delirium

  11. The Effect of Dexamethasone on Symptoms of Posttraumatic Stress Disorder and Depression After Cardiac Surgery and Intensive Care Admission: Longitudinal Follow-Up of a Randomized Controlled Trial.

    Science.gov (United States)

    Kok, Lotte; Hillegers, Manon H; Veldhuijzen, Dieuwke S; Cornelisse, Sandra; Nierich, Arno P; van der Maaten, Joost M; Rosseel, Peter M; Hofland, Jan; Sep, Milou S; Dieleman, Jan M; Vinkers, Christiaan H; Peelen, Linda M; Joëls, Marian; van Dijk, Diederik

    2016-03-01

    Cardiac surgery and postoperative admission to the ICU may lead to posttraumatic stress disorder and depression. Perioperatively administered corticosteroids potentially alter the risk of development of these psychiatric conditions, by affecting the hypothalamic-pituitary-adrenal axis. However, findings of previous studies are inconsistent. We aimed to assess the effect of a single dose of dexamethasone compared with placebo on symptoms of posttraumatic stress disorder and depression and health-related quality of life after cardiac surgery and ICU admission. Follow-up study of a randomized clinical trial. Five Dutch heart centers. Cardiac surgery patients (n = 1,244) who participated in the Dexamethasone for Cardiac Surgery trial. A single intraoperative IV dose of dexamethasone or placebo was administered in a randomized, double-blind way. Symptoms of posttraumatic stress disorder, depression, and health-related quality of life were assessed with validated questionnaires 1.5 years after randomization. Data were available for 1,125 patients (90.4%); of which 561 patients received dexamethasone and 564 patients received placebo. Overall, the prevalence of psychopathology was not influenced by dexamethasone. Posttraumatic stress disorder and depression were present in, respectively, 52 patients (9.3%) and 69 patients (12.3%) who received dexamethasone and in 66 patients (11.7%) and 78 patients (13.8%) who received placebo (posttraumatic stress disorder: odds ratio, 0.82; 95% CI, 0.55-1.20; p = 0.30; depression: odds ratio, 0.92; 95% CI, 0.64-1.31; p = 0.63). Subgroup analysis revealed a lower prevalence of posttraumatic stress disorder (odds ratio, 0.23; 95% CI, 0.07-0.72; p stress disorder and depression. However, in female patients, beneficial effects on the occurrence of posttraumatic stress disorder and depression may be present.

  12. Stress-Corrosion Cracking of Metallic Materials. Part III. Hydrogen Entry and Embrittlement in Steel

    Science.gov (United States)

    1975-04-01

    work of Kerns (36)] 29 22 Crack Velocity vs. Stress Intensity for AISI 4340 Steel (Martensitic and Bainitic Structures) in 314 NaCl Solution (pit = 6.0...magnitude greater for 4340 steel with a tempered martensite structure than for the lower bainite structure. Figure 22 shows crack velocity as a function of...applied stress intensity for martensitic and bainitic steels . The dif- ference was attributed to more effective trapping of hydrogen at coher- ently

  13. Parent Inclusion in Early Intensive Behavioral Intervention: The Influence of Parental Stress, Parent Treatment Fidelity and Parent-Mediated Generalization of Behavior Targets on Child Outcomes

    Science.gov (United States)

    Strauss, Kristin; Vicari, Stefano; Valeri, Giovanni; D'Elia, Lidia; Arima, Serena; Fava, Leonardo

    2012-01-01

    Although early intensive behavior interventions have been efficient in producing positive behavior outcome in young children with Autism Spectrum Disorder, there is a considerable variety in the children's progress. Research has suggested that parental and treatment factors are likely to affect children's response to treatment. The purpose of the…

  14. Intensive Care Unit

    Science.gov (United States)

    ... and job burnout. Possible Solutions Educate employees and management about job stress. Address work-related stressors, such as inadequate ... workload is in line with workers' capabilities and resources. Design ... Department of Health and Human Services (DHHS) National Institute for Occupational Safety and ...

  15. Molecular near-field antenna effect in resonance hyper-Raman scattering: Intermolecular vibronic intensity borrowing of solvent from solute through dipole-dipole and dipole-quadrupole interactions

    Energy Technology Data Exchange (ETDEWEB)

    Shimada, Rintaro; Hamaguchi, Hiro-o, E-mail: hhama@nctu.edu.tw [Department of Applied Chemistry and Institute of Molecular Science, National Chiao Tung University, 1001 University Road, Hsinchu 30010, Taiwan (China)

    2014-05-28

    We quantitatively interpret the recently discovered intriguing phenomenon related to resonance Hyper-Raman (HR) scattering. In resonance HR spectra of all-trans-β-carotene (β-carotene) in solution, vibrations of proximate solvent molecules are observed concomitantly with the solute β-carotene HR bands. It has been shown that these solvent bands are subject to marked intensity enhancements by more than 5 orders of magnitude under the presence of β-carotene. We have called this phenomenon the molecular-near field effect. Resonance HR spectra of β-carotene in benzene, deuterated benzene, cyclohexane, and deuterated cyclohexane have been measured precisely for a quantitative analysis of this effect. The assignments of the observed peaks are made by referring to the infrared, Raman, and HR spectra of neat solvents. It has been revealed that infrared active and some Raman active vibrations are active in the HR molecular near-field effect. The observed spectra in the form of difference spectra (between benzene/deuterated benzene and cyclohexane/deuterated cyclohexane) are quantitatively analyzed on the basis of the extended vibronic theory of resonance HR scattering. The theory incorporates the coupling of excited electronic states of β-carotene with the vibrations of a proximate solvent molecule through solute–solvent dipole–dipole and dipole–quadrupole interactions. It is shown that the infrared active modes arise from the dipole–dipole interaction, whereas Raman active modes from the dipole–quadrupole interaction. It is also shown that vibrations that give strongly polarized Raman bands are weak in the HR molecular near-field effect. The observed solvent HR spectra are simulated with the help of quantum chemical calculations for various orientations and distances of a solvent molecule with respect to the solute. The observed spectra are best simulated with random orientations of the solvent molecule at an intermolecular distance of 10 Å.

  16. Recruiting intensity

    OpenAIRE

    R. Jason Faberman

    2014-01-01

    To hire new workers, employers use a variety of recruiting methods in addition to posting a vacancy announcement. The intensity with which employers use these alternative methods can vary widely with a firm’s performance and with the business cycle. In fact, persistently low recruiting intensity helps to explain the sluggish pace of US job growth following the Great Recession.

  17. Thermal stresses in an orthotropic rectangular plate with a rigid ribbonlike inclusion

    International Nuclear Information System (INIS)

    Sumi, N.

    1981-01-01

    On the basis of the complex variable method for determining the stationary two-dimensional thermal stresses, the thermal stresses in an orthotropic rectangular plate with a rigid ribbonlike inclusion under a steady state temperature field is considered. The solution is found by the analytic continuation argument and the modified mapping-collocation technique. Numerical results indicate a dependence of the orthotropic stress intensity factors on the thermal, elastic and geometrical constants over a certain parameter range. (orig.)

  18. Stress in nurses working in intensive care units El estrés de los enfermeros que actúan en una unidad de terapia intensiva Estresse de enfermeiros com atuação em unidade de terapia intensiva

    Directory of Open Access Journals (Sweden)

    Ana Maria Cavalheiro

    2008-02-01

    Full Text Available The present study aimed to identify the presence of stress in nurses working in intensive care units, the stressing agents and symptoms associated to the nurses' perceptions of stress, and to assess the correlation between the occurrence of stress, sources of stress, and symptoms shown by the nurses. Seventy-five nurses took part in the study. The data were collected from questionnaires, analyzed with the Pearson correlation coefficients, and adjusted by general linear models. The study showed the presence of stress related to work dissatisfaction, activities regarded as critical situations in intensive care units, symptoms related to cardiovascular, digestive and musculoskeletal disorders. The conclusion is that stress is present in nurses' activities in intensive care units, related to characteristics of the health area itself, causing dissatisfaction and stress-related symptoms.El presente estudio tuvo como objetivos: identificar la presencia de estrés en enfermeros que trabajan en unidades de terapia intensiva; identificar a los agentes estresantes y a los síntomas asociados al estrés, según la percepción del enfermero; y, evaluar la correlación entre la presencia del estrés, las fuentes del estrés y los síntomas presentados por los enfermeros. Setenta y cinco enfermeros participaron del estudio. Los datos fueron recolectados por medio de cuestionarios. El análisis fue realizado utilizando los coeficientes de correlación de Pearson y ajustando con modelos lineales generalizados. El estudio mostró la presencia de estrés correlacionado a: la insatisfacción en el trabajo; a las actividades consideradas como situaciones críticas en unidad de terapia intensiva; a los síntomas relacionados con alteraciones cardiovasculares; al aparato digestivo y a los músculos del esqueleto. La conclusión del estudio es que el estrés está presente en la actividad del enfermero en las unidades de terapia intensiva y está correlacionado a

  19. Stress Management and Gifted Children

    Science.gov (United States)

    Patel, Vidisha A.

    2009-01-01

    Stress can affect anyone, and gifted children are no exception. Giftedness can sometimes be the cause of the stress. Perfectionism, sensitivity, and intensity are characteristics of gifted children that may exacerbate stress. Stress can be constructive. Prolonged stress, however, with no time to recover becomes detrimental. Continued stress upsets…

  20. Solid solution hardening in face centered binary alloys: Gliding statistics of a dislocation in random solid solution by atomistic simulation

    International Nuclear Information System (INIS)

    Patinet, S.

    2009-12-01

    The glide of edge and screw dislocation in solid solution is modeled through atomistic simulations in two model alloys of Ni(Al) and Al(Mg) described within the embedded atom method. Our approach is based on the study of the elementary interaction between dislocations and solutes to derive solid solution hardening of face centered cubic binary alloys. We identify the physical origins of the intensity and range of the interaction between a dislocation and a solute atom. The thermally activated crossing of a solute atom by a dislocation is studied at the atomistic scale. We show that hardening of edge and screw segments are similar. We develop a line tension model that reproduces quantitatively the atomistic calculations of the flow stress. We identify the universality class to which the dislocation depinning transition in solid solution belongs. (author)

  1. Sound intensity

    DEFF Research Database (Denmark)

    Crocker, Malcolm J.; Jacobsen, Finn

    1998-01-01

    This chapter is an overview, intended for readers with no special knowledge about this particular topic. The chapter deals with all aspects of sound intensity and its measurement from the fundamental theoretical background to practical applications of the measurement technique.......This chapter is an overview, intended for readers with no special knowledge about this particular topic. The chapter deals with all aspects of sound intensity and its measurement from the fundamental theoretical background to practical applications of the measurement technique....

  2. Sound Intensity

    DEFF Research Database (Denmark)

    Crocker, M.J.; Jacobsen, Finn

    1997-01-01

    This chapter is an overview, intended for readers with no special knowledge about this particular topic. The chapter deals with all aspects of sound intensity and its measurement from the fundamental theoretical background to practical applications of the measurement technique.......This chapter is an overview, intended for readers with no special knowledge about this particular topic. The chapter deals with all aspects of sound intensity and its measurement from the fundamental theoretical background to practical applications of the measurement technique....

  3. Marked lability in urinary cortisol levels in subgroups of combat veterans with posttraumatic stress disorder during an intensive exposure treatment program.

    Science.gov (United States)

    Mason, John W; Wang, Sheila; Yehuda, Rachel; Lubin, Hadar; Johnson, David; Bremner, J Douglas; Charney, Dennis; Southwick, Steven

    2002-01-01

    The objective of this study was to obtain longitudinal data on lability of cortisol levels in posttraumatic stress disorder (PTSD) because previous studies have largely been based on sampling at a single time point and have yielded varying results. This study measured urinary cortisol levels at admission, midcourse, and discharge during a 90-day hospitalization period in male Vietnam combat veterans with PTSD (N = 51). Although there were no significant differences in the mean +/- SEM urinary cortisol levels between the admission (59.4 +/- 3.0 microg/d), midcourse (55.6 +/- 3.9 microg/d), and discharge (53.4 +/- 3.4 microg/d) values, marked lability of cortisol levels in individual patients was observed over time, with changes ranging from +93 to -58 microg/d from admission to midcourse. In addition, this hormonal lability defined discrete subgroups of patients on the basis of the longitudinal pattern of cortisol change during exposure treatment, and there were significant psychometric differences in the level of social functioning between these subgroups. The findings do not support the concept of either a static "hypocortisolism" or "hypercortisolism" in PTSD, but rather suggest a psychogenic basis for cortisol alterations in PTSD in relation to psychosocial stress and indicate a central regulatory dysfunction of the hypothalamic-pituitary-adrenal axis characterized by a dynamic tendency to overreact in both upward and downward directions. The longitudinal findings fit with recent observations that cortisol elevations occur when acutely superimposed stressful conditions emotionally engage patients and overwhelm the usually dominating disengaging coping mechanisms associated with suppression of cortisol levels in PTSD. The findings emphasize the importance of longitudinal data in studies of the hypothalamic-pituitary-adrenal axis in PTSD.

  4. Stress Corrosion Cracking Behavior of Multipass TIG-Welded AA2219 Aluminum Alloy in 3.5 wt pct NaCl Solution

    Science.gov (United States)

    Venugopal, A.; Sreekumar, K.; Raja, V. S.

    2012-09-01

    The stress corrosion cracking (SCC) behavior of the AA2219 aluminum alloy in the single-pass (SP) and multipass (MP) welded conditions was examined and compared with that of the base metal (BM) in 3.5 wt pct NaCl solution using a slow-strain-rate technique (SSRT). The reduction in ductility was used as a parameter to evaluate the SCC susceptibility of both the BM and welded joints. The results showed that the ductility ratio ( ɛ NaCl/( ɛ air) was 0.97 and 0.96, respectively, for the BM and MP welded joint, and the same was marginally reduced to 0.9 for the SP welded joint. The fractographic examination of the failed samples revealed a typical ductile cracking morphology for all the base and welded joints, indicating the good environmental cracking resistance of this alloy under all welded conditions. To understand the decrease in the ductility of the SP welded joint, preexposure SSRT followed by microstructural observations were made, which showed that the decrease in ductility ratio of the SP welded joint was caused by the electrochemical pitting that assisted the nucleation of cracks in the form of corrosion induced mechanical cracking rather than true SCC failure of the alloy. The microstructural examination and polarization tests demonstrated a clear grain boundary (GB) sensitization of the PMZ, resulting in severe galvanic corrosion of the SP weld joint, which initiated the necessary conditions for the localized corrosion and cracking along the PMZ. The absence of PMZ and a refined fusion zone (FZ) structure because of the lesser heat input and postweld heating effect improved the galvanic corrosion resistance of the MP welded joint greatly, and thus, failure occurred along the FZ.

  5. Fundamental solutions and dual boundary element methods for fracture in plane Cosserat elasticity.

    Science.gov (United States)

    Atroshchenko, Elena; Bordas, Stéphane P A

    2015-07-08

    In this paper, both singular and hypersingular fundamental solutions of plane Cosserat elasticity are derived and given in a ready-to-use form. The hypersingular fundamental solutions allow to formulate the analogue of Somigliana stress identity, which can be used to obtain the stress and couple-stress fields inside the domain from the boundary values of the displacements, microrotation and stress and couple-stress tractions. Using these newly derived fundamental solutions, the boundary integral equations of both types are formulated and solved by the boundary element method. Simultaneous use of both types of equations (approach known as the dual boundary element method (BEM)) allows problems where parts of the boundary are overlapping, such as crack problems, to be treated and to do this for general geometry and loading conditions. The high accuracy of the boundary element method for both types of equations is demonstrated for a number of benchmark problems, including a Griffith crack problem and a plate with an edge crack. The detailed comparison of the BEM results and the analytical solution for a Griffith crack and an edge crack is given, particularly in terms of stress and couple-stress intensity factors, as well as the crack opening displacements and microrotations on the crack faces and the angular distributions of stresses and couple-stresses around the crack tip.

  6. Ba{sub 2.2}Ca{sub 0.8}Mg{sub 4}F{sub 14}, a new ''solid solution stabilized'' matrix for an intense blue phosphor

    Energy Technology Data Exchange (ETDEWEB)

    Kubel, F.; Pantazi, M. [TU Vienna, Inst. of Chemical Technologies and Analytics, Getreidemarkt 9, 164-SC, 1060 Vienna (Austria); Hagemann, H. [Departement de Chimie Physique, Universite de Geneve, 30, quai E.Ansermet, 1211 Geneva 4 (Switzerland)

    2011-09-15

    Barium calcium magnesium fluoride (Ba{sub 2}(Ba{sub x}Ca{sub 1-x})Mg{sub 4}F{sub 14}, x=0.19-0.26) has been synthesized at 850 C from precursors prepared by the solution precipitation method. Single crystals with composition of Ba{sub 2.200(2)}Ca{sub 0.800(2)}Mg{sub 4}F{sub 14}were obtained after prolonged heating. Lattice parameters from single crystal data are a = 12.4203(8) and c = 7.4365(5) A [tetragonal, space group P4{sub 2}/mnm (No. 136)]. They increase with increasing barium concentration within a given stability window. The structure is built of a network of MgF{sub 6} octahedra forming a pyrochlore related channel system and isolated fluorine ions. Within the channels, heavy alkaline earth ions are located. The wide channel is filled with off-center positioned barium ions. The channel with a narrow cross section hosts both ions, Ca{sup 2+}and Ba{sup 2+}. The structure is isotypic with Pb{sub 3}Nb{sub 4}O{sub 12}F{sub 2} but has a different coordination around Ba/Ca and Pb, respectively. Doped with {proportional_to}1% Eu(II), the compound shows intense blue luminescence under UV activation. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  7. High-intensity sports for posttraumatic stress disorder and depression: feasibility study of ocean therapy with veterans of Operation Enduring Freedom and Operation Iraqi Freedom.

    Science.gov (United States)

    Rogers, Carly M; Mallinson, Trudy; Peppers, Dominique

    2014-01-01

    In this study, we conducted a pretest-posttest investigation of a sports-oriented occupational therapy intervention using surfing in an experiential, skills-based program to support veterans with symptoms of posttraumatic stress disorder (PTSD) in their transition to civilian life. The purpose of this feasibility study was to evaluate the intervention for attendance rates and retention in the program provided in 5 sessions over 5 wk. Fourteen veterans from a specialty postdeployment clinic at a Veterans Affairs hospital were enrolled; 11 completed the study, and 10 attended ≥3 sessions. Participants reported clinically meaningful improvement in PTSD symptom severity (PTSD Checklist-Military Version, Wilcoxon signed rank Z = 2.5, p = .01) and in depressive symptoms (Major Depression Inventory, Wilcoxon signed rank Z = 2.05, p = .04). The results of this small, uncontrolled study suggest that a sports-oriented occupational therapy intervention has potential as a feasible adjunct intervention for veterans seeking mental health treatment for symptoms of PTSD. Copyright © 2014 by the American Occupational Therapy Association, Inc.

  8. Aqueous stress-corrosion cracking of high-toughness D6AC steel

    Science.gov (United States)

    Gilbreath, W. P.; Adamson, M. J.

    1976-01-01

    The crack growth behavior of D6AC steel as a function of stress intensity, stress and corrosion history, and test technique, under sustained load in filtered natural seawater, 3.3 per cent sodium chloride solution, and distilled water, was investigated. Reported investigations of D6AC were considered in terms of the present study with emphasis on thermal treatment, specimen configuration, fracture toughness, crack-growth rates, initiation period, and threshold. Both threshold and growth kinetics were found to be relatively insensitive to these test parameters. The apparent incubation period was dependent on technique, both detection sensitivity and precracking stress intensity level.

  9. Development Characteristics of Velocity Transports in An Isothermal Heated Drag-Reducing Surfactant Solution Flow

    Science.gov (United States)

    Zhang, Hongxia; Wang, Dezhong; Chen, Hanping; Wang, Yanping

    2007-06-01

    The development characteristics, turbulence transports for stresses and kinetic energy of a cetyltrimethyl ammonium chloride (CTAC) surfactant solution for a two-dimensional channel flow have been experimentally investigated. Time mean velocity and fluctuating velocity are measured using a Phase Doppler Anemometry (PDA) at the Reynolds number 1.78×104 and isothermal heated temperature 31°C. Although mean velocity profiles at three cross sections show that the fluid is almost fully developed, the peak location of fluctuating intensity for the CTAC solution is slightly away from the wall downstream from the fluid and the peak location of fluctuating intensity is observed at far away from the wall than that of water. The location where the velocity gradient has its maximum, the fluctuating intensity does not get the high value. The elastic shear stress contribution to the total shear stress is 15 percents to 36 percents and it gets to the maximum near to the wall. The surfactant elastic shear stress is almost a liner function of the height of the channel, which means that the elastic stress contribution of the different cross locations is approximately the same. The fluctuating surfactant stress work is negative and the fluctuating elastic shear stresses produce rather than dissipate kinetic energy.

  10. Theory of thermal stresses

    CERN Document Server

    Boley, Bruno A

    1997-01-01

    Highly regarded text presents detailed discussion of fundamental aspects of theory, background, problems with detailed solutions. Basics of thermoelasticity, heat transfer theory, thermal stress analysis, more. 1985 edition.

  11. Intensive mobilities

    DEFF Research Database (Denmark)

    Vannini, Phillip; Bissell, David; Jensen, Ole B.

    with fieldwork conducted in Canada, Denmark and Australia to develop our understanding of the experiential politics of long distance workers. Rather than focusing on the extensive dimensions of mobilities that are implicated in patterns and trends, our paper turns to the intensive dimensions of this experience......This paper explores the intensities of long distance commuting journeys as a way of exploring how bodily sensibilities are being changed by the mobilities that they undertake. The context of this paper is that many people are travelling further to work than ever before owing to a variety of factors...... which relate to transport, housing and employment. Yet we argue that the experiential dimensions of long distance mobilities have not received the attention that they deserve within geographical research on mobilities. This paper combines ideas from mobilities research and contemporary social theory...

  12. A pilot study on peritraumatic dissociation and coping styles as risk factors for posttraumatic stress, anxiety and depression in parents after their child's unexpected admission to a Pediatric Intensive Care Unit

    Directory of Open Access Journals (Sweden)

    Last Bob F

    2009-10-01

    Full Text Available Abstract Aim To study the prevalence of posttraumatic stress disorder (PTSD, anxiety and depression in parents three months after pediatric intensive care treatment of their child and examine if peritraumatic dissocation and coping styles are related to these mental health problems. Methods This is a prospective cohort study and included parents of children unexpectedly admitted to the Pediatric Intensive Care Unit (PICU from January 2006 to March 2007. At three months follow-up parents completed PTSD (n = 115, anxiety and depression (n = 128 questionnaires. Immediately after discharge, parents completed peritraumatic dissocation and coping questionnaires. Linear regression models with generalized estimating equations examined risk factors for mental health problems. Results Over 10% of the parents were likely to meet criteria for PTSD and almost one quarter for subclinical PTSD. Respectively 15% to 23% of the parents reported clinically significant levels of depression and anxiety. Peritraumatic dissocation was most strongly associated with PTSD, anxiety as well as depression. Avoidance coping was primarily associated with PTSD. Conclusion A significant number of parents have mental health problems three months after unexpected PICU treatment of their child. Improving detection and raise awareness of mental health problems is important to minimize the negative effect of these problems on parents' well-being.

  13. O estresse entre enfermeiros que atuam em Unidade de Terapia Intensiva El estrés entre enfermeros que actúan en las Unidades de Terapia Intensiva Stress among nurses who work at the intensive care unit

    Directory of Open Access Journals (Sweden)

    Vivian Aline Preto

    2009-12-01

    demuestra que el estrés, inclusive siendo discutido desde hace mucho tiempo, todavía acomete a esos profesionales, y las instituciones todavía no ofrecen atención especial a los enfermeros en el sentido de promover su salud integral.Stress has been observed among various professionals, including intensive care unit (ICU nurses, due to their close contact with patients in distress and at the risk of death. This situation becomes worse due to the need for direct and intensive care. This study was performed to characterize nurses working at ICU and verify the presence of stress among them. A total of 21 ICU nurses from five hospitals located in the state of São Paulo answered a series of questions about the ICU and completed the Nurse Stress Inventory. Study results showed that 57.1% of nurses consider the ICU a stressful place, and 23.8% achieved a high score, indicating the presence of stress. Stress continues to affect these professionals, and institutions do not offer any special care for nurses in the sense of promoting comprehensive health care.

  14. Human Peritoneal Mesothelial Cell Death Induced by High-Glucose Hypertonic Solution Involves Ca2+ and Na+ Ions and Oxidative Stress with the Participation of PKC/NOX2 and PI3K/Akt Pathways

    Directory of Open Access Journals (Sweden)

    Felipe Simon

    2017-06-01

    Full Text Available Chronic peritoneal dialysis (PD therapy is equally efficient as hemodialysis while providing greater patient comfort and mobility. Therefore, PD is the treatment of choice for several types of renal patients. During PD, a high-glucose hyperosmotic (HGH solution is administered into the peritoneal cavity to generate an osmotic gradient that promotes water and solutes transport from peritoneal blood to the dialysis solution. Unfortunately, PD has been associated with a loss of peritoneal viability and function through the generation of a severe inflammatory state that induces human peritoneal mesothelial cell (HPMC death. Despite this deleterious effect, the precise molecular mechanism of HPMC death as induced by HGH solutions is far from being understood. Therefore, the aim of this study was to explore the pathways involved in HGH solution-induced HPMC death. HGH-induced HPMC death included influxes of intracellular Ca2+ and Na+. Furthermore, HGH-induced HPMC death was inhibited by antioxidant and reducing agents. In line with this, HPMC death was induced solely by increased oxidative stress. In addition to this, the cPKC/NOX2 and PI3K/Akt intracellular signaling pathways also participated in HGH-induced HPMC death. The participation of PI3K/Akt intracellular is in agreement with previously shown in rat PMC apoptosis. These findings contribute toward fully elucidating the underlying molecular mechanism mediating peritoneal mesothelial cell death induced by high-glucose solutions during peritoneal dialysis.

  15. Oxidative stress

    Directory of Open Access Journals (Sweden)

    Osredkar Joško

    2012-05-01

    Full Text Available The human organism is exposed to the influence of various forms of stress, either physical, psychological or chemical, which all have in common that they may adversely affect our body. A certain amount of stress is always present and somehow directs, promotes or inhibits the functioning of the human body. Unfortunately, we are now too many and too often exposed to excessive stress, which certainly has adverse consequences. This is especially true for a particular type of stress, called oxidative stress. All aerobic organisms are exposed to this type of stress because they produce energy by using oxygen. For this type of stress you could say that it is rather imperceptibly involved in our lives, as it becomes apparent only at the outbreak of certain diseases. Today we are well aware of the adverse impact of radicals, whose surplus is the main cause of oxidative stress. However, the key problem remains the detection of oxidative stress, which would allow us to undertake timely action and prevent outbreak of many diseases of our time. There are many factors that promote oxidative stress, among them are certainly a fast lifestyle and environmental pollution. The increase in oxidative stress can also trigger intense physical activity that is directly associated with an increased oxygen consumption and the resulting formation of free radicals. Considering generally positive attitude to physical activity, this fact may seem at first glance contradictory, but the finding has been confimed by several studies in active athletes. Training of a top athlete daily demands great physical effort, which is also reflected in the oxidative state of the organism. However, it should be noted that the top athletes in comparison with normal individuals have a different defense system, which can counteract the negative effects of oxidative stress. Quite the opposite is true for irregular or excessive physical activity to which the body is not adapted.

  16. The effect of a zinc–tin-oxide layer used as an etch-stopper layer on the bias stress stability of solution-processed indium–gallium–zinc-oxide thin-film transistors

    International Nuclear Information System (INIS)

    Kim, Chul Ho; Rim, You Seung; Kim, Hyun Jae

    2014-01-01

    We investigated the bias stress stability of solution-processed indium–gallium–zinc-oxide thin-film transistors (IGZO TFTs) using zinc–tin-oxide (ZTO) as the etch-stopper layer, the so-called dual-active-layered ZTO/IGZO TFT (DALZI TFT). The DALZI TFT can use a low-cost back-channel-etch structure because of the high chemical stability of the upper ZTO layer. The DALZI TFT exhibited only a threshold voltage shift of −1.86 V under negative bias illumination stress (NBIS) conditions (stress time = 1000 s), while the unpassivated IGZO TFT suffered from a threshold voltage shift of −19.59 V under NBIS conditions (stress time = 1000 s). The superior bias stress stability of the DALZI TFT is attributed not only to the densification effect by the multi-stacking process but also to the lower sensitivity to ambient gases (e.g., oxygen and water vapour) due to the low oxygen vacancy in the upper ZTO layer. (paper)

  17. The application of fracture mechanics in thermally stressed structures

    International Nuclear Information System (INIS)

    Cesari, F.; Maitan, A.; Hellen, T.K.

    1981-03-01

    There is considerable interest in calculating stress intensity factors at crack tips in thermally stressed structures, particularly in the power generation industry where the safe operation of both conventional and nuclear plant is founded on rigorous safety cases. Analytical methods to study such problems are of limited scope, although they can be extended by introducing numerical techniques. Purpose built numerical methods, however, offer a much greater and more accurate solution capability and in particular the finite element method is well advanced. Such methods are described, including how stress intensity factors can be obtained from the finite element results. They are then applied to a range of thermally stressed problems including plates with central cracks and cylinders with axial and circumferential cracks. Both steady state and transient temperature distributions arising from typical thermal shocks are considered. (author)

  18. Damage assessment of low-cycle fatigue by crack growth prediction. Fatigue life under cyclic thermal stress

    International Nuclear Information System (INIS)

    Kamaya, Masayuki

    2013-01-01

    The number of cycles to failure of specimens in fatigue tests can be estimated by predicting crack growth. Under a cyclic thermal stress caused by fluctuation of fluid temperature, due to the stress gradient in the thickness direction, the estimated fatigue life differs from that estimated for mechanical fatigue tests. In this paper, the influence of crack growth under cyclic thermal loading on the fatigue life was investigated. First, the thermal stress was derived by superposing analytical solutions, and then, the stress intensity factor was obtained by the weight function method. It was shown that the thermal stress depended not on the rate of the fluid temperature change but on the rise time, and the magnitude of the stress was increased as the rise time was decreased. The stress intensity factor under the cyclic thermal stress was smaller than that under the uniform stress distribution. The change in the stress intensity factor with the crack depth did not depend on the heat transfer coefficient and only slightly depended on the rise time. The estimated fatigue life under the cyclic thermal loading could be 1.6 times longer than that under the uniform stress distribution. The critical size for the fatigue life determination was assumed to be 3 mm for fatigue test specimens of 10 mm diameter. By evaluating the critical size by structural integrity analyses, the fatigue life was increased and the effect of the critical size on the fatigue life was more pronounced for the cyclic thermal stress. (author)

  19. Damage assessment of low-cycle fatigue by crack growth prediction. Fatigue life under cyclic thermal stress

    International Nuclear Information System (INIS)

    Kamaya, Masayuki

    2013-01-01

    The number of cycles to failure of specimens in fatigue tests can be estimated by predicting crack growth. Under a cyclic thermal stress caused by fluctuation of fluid temperature, due to the stress gradient in the thickness direction, the estimated fatigue life differs from that estimated for mechanical fatigue tests. In this paper, the influence of crack growth under cyclic thermal loading on the fatigue life was investigated. First, the thermal stress was derived by superposing analytical solutions, and then, the stress intensity factor was obtained by the weight function method. It was shown that the thermal stress depended not on the rate of the fluid temperature change but on the rise time, and the magnitude of the stress was increased as the rise time was decreased. The stress intensity factor under the cyclic thermal stress was smaller than that under the uniform stress distribution. The change in the stress intensity factor with the crack depth was almost the same regardless of the rise time. The estimated fatigue life under the cyclic thermal loading could be 1.6 times longer than that under the uniform stress distribution. The critical size for the fatigue life determination was assumed to be 3 mm for fatigue test specimens of 10 mm diameter. By evaluating the critical size by structural integrity analyses, the fatigue life was increased and the effect of the critical size on the fatigue life was more pronounced for the cyclic thermal stress. (author)

  20. Estrés en padres de los recién nacidos hospitalizados en la Unidad de Alto Riesgo Neonatal Stress in hospitalized parents of newly born in the neonatal intensive care unit

    Directory of Open Access Journals (Sweden)

    Flor María Parra Falcón

    2009-03-01

    Full Text Available Justificación: Al ingresar un recién nacido en la Unidad de Alto Riesgo Neonatal (UARN, recibimos también unos padres que se encuentran abruptamente con una realidad diferente a la deseada en el embarazo. Objetivo: Elaborar lineamientos para disminuir el estrés en padres de los recién nacidos hospitalizados en la UARN. Tipo y Diseño: Descriptivo; transversal. Metodología: Se elaboró un cuestionario para identificar manifestaciones cognitivas, conductuales y afectivas del estrés en 36 padres, cuyo Alfa de Cronbach: 0,914. Resultados: En manifestaciones emocionales, destacó la inestabilidad emocional con predisposición al llanto, con 13,6%. La dimensión conductual reflejó 13,4% para cambio de hábitos, con descuido de la apariencia personal. En manifestaciones cognitivas, el 10,1% fue para pérdida de la atención por estímulos relevantes auditivos. Conclusiones: Se consideró disminuir las manifestaciones del estrés de los padres mediante la elaboración de lineamientos basados en técnicas cognitivas-conductuales.Justification: When a newly born is admitted at the Neonatal Intensive Care Unit, there are also, along with it, a couple of parents that are blown away with this new reality which is different from the one imagined during the pregnancy. Objective: to establish the steps to reduce the stress of the parents of the newly born hospitalized at the NICU. Type and design: Descriptive; transversal. Methodology: it was made a form of questions in order to identify the cognitive, behavior and affective manifestations of the stress in 36 mothers and fathers with an Alpha of Cronbach: 0,914. Results: In emotional manifestations, the emotional instability with predisposition of wiping was outstanding with 13,6%. The behavior dimension reflects 13,4% with a change of the habits specifically in the lack of care in their personal look. The cognitive manifestations was of 10,1% with a lack of attention because of the sonorous irrelevant

  1. Mental health and functional impairment outcomes following a 6-week intensive treatment programme for UK military veterans with post-traumatic stress disorder (PTSD): a naturalistic study to explore dropout and health outcomes at follow-up.

    Science.gov (United States)

    Murphy, Dominic; Hodgman, Georgina; Carson, Carron; Spencer-Harper, Lucy; Hinton, Mark; Wessely, Simon; Busuttil, Walter

    2015-03-20

    Combat Stress, a UK national charity for veterans with mental health problems, has been funded by the National Health Service (NHS) to provide a national specialist service to deliver treatment for post-traumatic stress disorder (PTSD). This paper reports the efficacy of a PTSD treatment programme for UK veterans at 6 months follow-up. A within subject design. UK veterans with a diagnosis of PTSD who accessed Combat Stress. 246 veterans who received treatment between late 2012 and early 2014. An intensive 6-week residential treatment programme, consisting of a mixture of individual and group sessions. Participants were offered a minimum of 15 individual trauma-focused cognitive behavioural therapy sessions. In addition, participants were offered 55 group sessions f