Intrinsic Cell Stress is Independent of Organization in Engineered Cell Sheets.

Science.gov (United States)

van Loosdregt, Inge A E W; Dekker, Sylvia; Alford, Patrick W; Oomens, Cees W J; Loerakker, Sandra; Bouten, Carlijn V C

2018-06-01

Understanding cell contractility is of fundamental importance for cardiovascular tissue engineering, due to its major impact on the tissue's mechanical properties as well as the development of permanent dimensional changes, e.g., by contraction or dilatation of the tissue. Previous attempts to quantify contractile cellular stresses mostly used strongly aligned monolayers of cells, which might not represent the actual organization in engineered cardiovascular tissues such as heart valves. In the present study, therefore, we investigated whether differences in organization affect the magnitude of intrinsic stress generated by individual myofibroblasts, a frequently used cell source for in vitro engineered heart valves. Four different monolayer organizations were created via micro-contact printing of fibronectin lines on thin PDMS films, ranging from strongly anisotropic to isotropic. Thin film curvature, cell density, and actin stress fiber distribution were quantified, and subsequently, intrinsic stress and contractility of the monolayers were determined by incorporating these data into sample-specific finite element models. Our data indicate that the intrinsic stress exerted by the monolayers in each group correlates with cell density. Additionally, after normalizing for cell density and accounting for differences in alignment, no consistent differences in intrinsic contractility were found between the different monolayer organizations, suggesting that the intrinsic stress exerted by individual myofibroblasts is independent of the organization. Consequently, this study emphasizes the importance of choosing proper architectural properties for scaffolds in cardiovascular tissue engineering, as these directly affect the stresses in the tissue, which play a crucial role in both the functionality and remodeling of (engineered) cardiovascular tissues.

Requirements Engineering for Pervasive Services

NARCIS (Netherlands)

Kolos, L.; Poulisse, Gert-Jan; van Eck, Pascal; Videira lopes, C.; Schaefer, S.; Clarke, S.; Elrad, T.; Jahnke, J.

2005-01-01

Developing pervasive mobile services for a mass market of end customers entails large up-front investments and therefore a good understanding of customer requirements is of paramount importance. This paper presents an approach for developing requirements engineering method that takes distinguishing

Advances in through-life engineering services

CERN Document Server

Roy, Rajkumar; Shaw, Andy

2017-01-01

This edited book offers further advances, new perspectives, and developments from world leaders in the field of through-life engineering services (TES). It builds up on the earlier book by the same authors entitled: “Through-life Engineering Services: Motivation, Theory and Practice.” This compendium introduces and discusses further, the developments in workshop-based and 'in situ' maintenance and support of high-value engineering products, as well as the application of drone technology for autonomous and self-healing product support. The links between ‘integrated planning’ and planned obsolescence, risk and cost modelling are also examined. The role of data, information, and knowledge management relative to component and system degradation and failure is also presented. This is supported by consideration of the effects upon the maintenance and support decision by the presence of 'No Fault Found' error signals within system data. Further to this the role of diagnostics and prognostics is also discusse...

Correction of engineering servicing regularity of transporttechnological machines in operational process

Science.gov (United States)

Makarova, A. N.; Makarov, E. I.; Zakharov, N. S.

2018-03-01

In the article, the issue of correcting engineering servicing regularity on the basis of actual dependability data of cars in operation is considered. The purpose of the conducted research is to increase dependability of transport-technological machines by correcting engineering servicing regularity. The subject of the research is the mechanism of engineering servicing regularity influence on reliability measure. On the basis of the analysis of researches carried out before, a method of nonparametric estimation of car failure measure according to actual time-to-failure data was chosen. A possibility of describing the failure measure dependence on engineering servicing regularity by various mathematical models is considered. It is proven that the exponential model is the most appropriate for that purpose. The obtained results can be used as a separate method of engineering servicing regularity correction with certain operational conditions taken into account, as well as for the technical-economical and economical-stochastic methods improvement. Thus, on the basis of the conducted researches, a method of engineering servicing regularity correction of transport-technological machines in the operational process was developed. The use of that method will allow decreasing the number of failures.

[The Engineering and Technical Services Directorate at the Glenn Research Center

Science.gov (United States)

Moon, James

2004-01-01

My name is James Moon and I am a senior at Tennessee State University where my major is Aeronautical and Industrial Technology with a concentration in industrial electronics. I am currently serving my internship in the Engineering and Technical Services Directorate at the Glenn Research Center (GRC). The Engineering and Technical Service Directorate provides the services and infrastructure for the Glenn Research Center to take research concepts to reality. They provide a full range of integrated services including engineering, advanced prototyping and testing, facility management, and information technology for NASA, industry, and academia. Engineering and Technical Services contains the core knowledge in Information Technology (IT). This includes data systems and analysis, inter and intranet based systems design and data security. Including the design and development of embedded real-time s o h a r e applications for flight and supporting ground systems, Engineering and Technical Services provide a wide range of IT services and products specific to the Glenn Research Center research and engineering community. In the 7000 Directorate I work directly in the 7611 organization. This organization is known as the Aviation Environments Technical Branch. My mentor is Vincent Satterwhite who is also the Branch Chief of the Aviation Environments Technical Branch. In this branch, I serve as the Assistant program manager of the Engineering Technology Program. The Engineering Technology Program (ETP) is one of three components of the High School L.E.R.C.I.P. This is an Agency-sponsored, eight-week research-based apprenticeship program designed to attract traditionally underrepresented high school students that demonstrate an aptitude for and interest in mathematics, science, engineering, and technology.

Systems engineering implementation plan for the liquid effluents services program

International Nuclear Information System (INIS)

Lowe, S.S.

1995-01-01

A graded approach is being taken by the Liquid Effluents Services Program in implementing systems engineering because of the advanced state of the program. The approach is cost-effective and takes credit for related work already completed, yet retains the benefits of systems engineering. This plan describes how the Liquid Effluents Services Program will implement systems engineering so there is a common understanding. Systems engineering work to be performed and the products of that work are identified. The relation to the current planning process and integration with the sitewide systems engineering effort is described

ITER diagnostics ex-vessel engineering services

Energy Technology Data Exchange (ETDEWEB)

Arumugam, A.P., E-mail: arun.prakash@iter.org; Walker, C.I.; Andrew, P.; Barnsley, R.; Beltran, D.; Bertalot, L.; Dammann, A.; Direz, M.F.; Drevon, J.M.; Encheva, A.; Giacomin, T.; Hourtoule, J.; Kuehn, I.; Lanza, R.; Levesy, B.; Maquet, P.; Patel, K.M.; Patisson, L.; Pitcher, C.S.; Portales, M.; and others

2013-10-15

Highlights: • This paper describes about the ITER diagnostics ex-vessel engineering services. • It describes various diagnostics systems, its location and its environment. • Diagnostics interfaces with other services such as the buildings, HVAC, electrical services, cooling water, vacuum, liquid and gas distribution. • All the interfaces with these services are identified and defined. • Buildings services for diagnostics, such as penetrations, local shielding, embedment and temperature control are discussed. -- Abstract: Extensive diagnostics systems will be installed on the ITER machine to provide the measurements necessary to control, evaluate and optimize plasma performance in ITER and to further the understanding of plasma physics. These include measurements of temperature, density, impurity concentration, and particle and energy confinement times. ITER diagnostic systems extend from the center of the Tokamak to the various diagnostic areas, where they are controlled and acquired data is processed. This mainly includes the areas such as ports, port cells, gallery, diagnostics enclosures and cubicle areas. The diagnostics port plugs encloses the front end of the diagnostic systems and the diagnostics building houses the diagnostics equipment, instrumentation and control cubicles. There are several systems providing services to diagnostics. These mainly include ITER buildings, electrical power services, cooling water services, Heating Ventilation and Air Conditioning (HVAC), vacuum services, liquid and gas distribution services, cable engineering, de-tritiation systems, control cubicles, etc. Requirements of these service systems have to be defined, even though many of the diagnostics are at an early stage of development. It is a real challenge to define and to design diagnostics systems considering the constraints imposed by these service systems. This paper summarizes the provision of these services to the individual diagnostics and diagnostics areas

ITER diagnostics ex-vessel engineering services

International Nuclear Information System (INIS)

Arumugam, A.P.; Walker, C.I.; Andrew, P.; Barnsley, R.; Beltran, D.; Bertalot, L.; Dammann, A.; Direz, M.F.; Drevon, J.M.; Encheva, A.; Giacomin, T.; Hourtoule, J.; Kuehn, I.; Lanza, R.; Levesy, B.; Maquet, P.; Patel, K.M.; Patisson, L.; Pitcher, C.S.; Portales, M.

2013-01-01

Highlights: • This paper describes about the ITER diagnostics ex-vessel engineering services. • It describes various diagnostics systems, its location and its environment. • Diagnostics interfaces with other services such as the buildings, HVAC, electrical services, cooling water, vacuum, liquid and gas distribution. • All the interfaces with these services are identified and defined. • Buildings services for diagnostics, such as penetrations, local shielding, embedment and temperature control are discussed. -- Abstract: Extensive diagnostics systems will be installed on the ITER machine to provide the measurements necessary to control, evaluate and optimize plasma performance in ITER and to further the understanding of plasma physics. These include measurements of temperature, density, impurity concentration, and particle and energy confinement times. ITER diagnostic systems extend from the center of the Tokamak to the various diagnostic areas, where they are controlled and acquired data is processed. This mainly includes the areas such as ports, port cells, gallery, diagnostics enclosures and cubicle areas. The diagnostics port plugs encloses the front end of the diagnostic systems and the diagnostics building houses the diagnostics equipment, instrumentation and control cubicles. There are several systems providing services to diagnostics. These mainly include ITER buildings, electrical power services, cooling water services, Heating Ventilation and Air Conditioning (HVAC), vacuum services, liquid and gas distribution services, cable engineering, de-tritiation systems, control cubicles, etc. Requirements of these service systems have to be defined, even though many of the diagnostics are at an early stage of development. It is a real challenge to define and to design diagnostics systems considering the constraints imposed by these service systems. This paper summarizes the provision of these services to the individual diagnostics and diagnostics areas

Business aspects and cost advantages of partnering for fossil engineering services

International Nuclear Information System (INIS)

Featham, M.D.; Sensenig, R.G.

1995-01-01

In today's environment where utility companies are attempting to reduce costs, alternative cost competitive approaches are being adopted to traditional fossil power plant engineering. One approach is to utilize Partnering of multiple organizations to provide cost competitive and quality engineering services. An approach to Partnering that involves Florida Power Corporation Partnering with multiple architect/engineers to provide the fossil plant engineering services is described in this paper

76 FR 58155 - Defense Federal Acquisition Regulation Supplement; Construction and Architect-Engineer Services...

Science.gov (United States)

2011-09-20

... Federal Acquisition Regulation Supplement; Construction and Architect-Engineer Services Performance... performance evaluations for construction and architect-engineer services. DATES: Effective Date: September 20... past performance for construction and Architect- Engineer services. On April 19, 2011, DoD published a...

Subterranean stress engineering experiments

International Nuclear Information System (INIS)

Campbell, J.R.; Colgate, S.A.; Wheat, B.M.

1980-01-01

The state of stress in a subterranean rock mass has classically been assumed to be constant at best. In soil with a high clay content, preconsolidation and drainage methods can lead to more stable foundation material, but methods for engineering the stresses in large masses of rock are not well known. This paper shows the results from an experiment designed to alter the in situ rock stress field in an oil shale mine. This was done by hydrofracturing the rock by use of a packed-well injection system and then propping the crack open with a thixotropic gel, which slowly hardened to the consistency of cement. Successive hydrofracture and high-pressure grouting resulted in an overstressed region. Well-head injection pressures, surface tilts, injection rates, and subterranean strains were measured and recorded on floppy disk by a Z-80 microprocessor. The results were then transmitted to the large computer system at the Los Alamos Scientific Laboratory (LASL). To put the data in a more useful form, computer-generated movies of the tilts and strains were made by use of computer graphics developed at LASL. The purpose of this paper is to present results from the Single Large Instrumented Test conducted in the Colony Oil Shale Mine near Rifle, Colorado. 13 figures

Model-driven Service Engineering with SoaML

Science.gov (United States)

Elvesæter, Brian; Carrez, Cyril; Mohagheghi, Parastoo; Berre, Arne-Jørgen; Johnsen, Svein G.; Solberg, Arnor

This chapter presents a model-driven service engineering (MDSE) methodology that uses OMG MDA specifications such as BMM, BPMN and SoaML to identify and specify services within a service-oriented architecture. The methodology takes advantage of business modelling practices and provides a guide to service modelling with SoaML. The presentation is case-driven and illuminated using the telecommunication example. The chapter focuses in particular on the use of the SoaML modelling language as a means for expressing service specifications that are aligned with business models and can be realized in different platform technologies.

Phytohormones and their metabolic engineering for abiotic stress tolerance in crop plants

Directory of Open Access Journals (Sweden)

Shabir H. Wani

2016-06-01

Full Text Available Abiotic stresses including drought, salinity, heat, cold, flooding, and ultraviolet radiation causes crop losses worldwide. In recent times, preventing these crop losses and producing more food and feed to meet the demands of ever-increasing human populations have gained unprecedented importance. However, the proportion of agricultural lands facing multiple abiotic stresses is expected only to rise under a changing global climate fueled by anthropogenic activities. Identifying the mechanisms developed and deployed by plants to counteract abiotic stresses and maintain their growth and survival under harsh conditions thus holds great significance. Recent investigations have shown that phytohormones, including the classical auxins, cytokinins, ethylene, and gibberellins, and newer members including brassinosteroids, jasmonates, and strigolactones may prove to be important metabolic engineering targets for producing abiotic stress-tolerant crop plants. In this review, we summarize and critically assess the roles that phytohormones play in plant growth and development and abiotic stress tolerance, besides their engineering for conferring abiotic stress tolerance in transgenic crops. We also describe recent successes in identifying the roles of phytohormones under stressful conditions. We conclude by describing the recent progress and future prospects including limitations and challenges of phytohormone engineering for inducing abiotic stress tolerance in crop plants.

Improved structural integrity through advances in reliable residual stress measurement: the impact of ENGIN-X

Science.gov (United States)

Edwards, L.; Santisteban, J. R.

The determination of accurate reliable residual stresses is critical to many fields of structural integrity. Neutron stress measurement is a non-destructive technique that uniquely provides insights into stress fields deep within engineering components and structures. As such, it has become an increasingly important tool within engineering, leading to improved manufacturing processes to reduce stress and distortion as well as to the definition of more precise lifing procedures. This paper describes the likely impact of the next generation of dedicated engineering stress diffractometers currently being constructed and the utility of the technique using examples of residual stresses both beneficial and detrimental to structural integrity.

Service Engineering as an Approach to Designing Industrial Product Service Systems

OpenAIRE

Schuh, G.; Gudergan, G.

2009-01-01

Organised by: Cranfield University Unique customer solutions which integrate products and services into a high value offering have the potential to successfully differentiate from competition even prices are dictating product markets. However, companies face tremendous challenges to develop customer solutions. Service engineering is considered to be the scientific discipline which supports the design task of intangible offerings and thus a foundation for solution design. We enh...

22 CFR 228.39 - Special source rules for construction and engineering services.

Science.gov (United States)

2010-04-01

... engineering services. 228.39 Section 228.39 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT RULES ON SOURCE, ORIGIN AND NATIONALITY FOR COMMODITIES AND SERVICES FINANCED BY USAID Conditions Governing the... engineering services. Advanced developing countries, eligible under Geographic Code 941, which have attained a...

Research and development related to the services engineering

International Nuclear Information System (INIS)

Rembado, J. L.

2000-01-01

In the present paper it is clarified what is understood by the expression R and D, Research and Development in the Servicie Engineering's which support the nuclear power plants exploitation, being more appropriated to talk about Innovation and Technological Development. In this paper it is analysed the need to have an innovation as per the marketing needs and to have a technological development to maintain an independence to let us to keep and increase the company's activity. It is described how the Services Engineering's with technological development turn to equipment suppliers which can be supplied to the nuclear sector as well as to other industrial sectors. Finally, it is described the innovation and technological development evolution, the technological polities objectives and the action lines of Tecnatom, S. A. as a Services Engineering's. (Author)

Engineering Consultancy: An Assessment of IT-enabled International Delivery of Services

DEFF Research Database (Denmark)

Baark, Erik

1999-01-01

The delivery of engineering consultancy services in global markets has been dominated by a small group of firms located in Europe and the US. Like many other service industries, engineering consultants have depended on the movement of highly qualified people and establishment of local affiliates...... services in arms-length transactions across national borders does not appear to have been significantly exploited. Nevertheless, IT-enabled delivery of engineering consultancy services opens up possibilities for business process reengineering that may provide some firms new competitive advantages in global...... markets and lead to further integration of design and construction in partnerships or project consortia, or in the strengthening of design-build approaches in project execution....

Challenges faced by engineering services group in meeting nuclear power project targets

International Nuclear Information System (INIS)

Phanse, N.R.

2001-01-01

Nuclear Power Corporation of India Ltd. (NPCIL) is an organisation building and operating nuclear power stations for which a number of different types of engineering services/activities are necessary. All these services are provided by Engineering Services Group of NPCIL. The activities and responsibilities of the group are discussed

48 CFR 52.244-4 - Subcontractors and outside associates and consultants (Architect-engineer services).

Science.gov (United States)

2010-10-01

... associates and consultants (Architect-engineer services). 52.244-4 Section 52.244-4 Federal Acquisition... consultants (Architect-engineer services). As prescribed in 44.204(b), insert the following clause: Subcontractors and Outside Associates and Consultants (Architect-Engineer Services) (AUG 1998) Any subcontractors...

Virtual Reference Services through Web Search Engines: Study of Academic Libraries in Pakistan

Directory of Open Access Journals (Sweden)

Rubia Khan

2017-03-01

Full Text Available Web search engines (WSE are powerful and popular tools in the field of information service management. This study is an attempt to examine the impact and usefulness of web search engines in providing virtual reference services (VRS within academic libraries in Pakistan. The study also attempts to investigate the relevant expertise and skills of library professionals in providing digital reference services (DRS efficiently using web search engines. Methodology used in this study is quantitative in nature. The data was collected from fifty public and private sector universities in Pakistan using a structured questionnaire. Microsoft Excel and SPSS were used for data analysis. The study concludes that web search engines are commonly used by librarians to help users (especially research scholars by providing digital reference services. The study also finds a positive correlation between use of web search engines and quality of digital reference services provided to library users. It is concluded that although search engines have increased the expectations of users and are really big competitors to a library’s reference desk, they are however not an alternative to reference service. Findings reveal that search engines pose numerous challenges for librarians and the study also attempts to bring together possible remedial measures. This study is useful for library professionals to understand the importance of search engines in providing VRS. The study also provides an intellectual comparison among different search engines, their capabilities, limitations, challenges and opportunities to provide VRS effectively in libraries.

48 CFR 36.702 - Forms for use in contracting for architect-engineer services.

Science.gov (United States)

2010-10-01

... contracting for architect-engineer services. 36.702 Section 36.702 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Standard and Optional Forms for Contracting for Construction, Architect-Engineer Services, and...

Experimental stress analysis for determination of residual stresses and integrity monitoring of components and systems

International Nuclear Information System (INIS)

1993-01-01

For an analysis of the safety-related significance of residual stresses, mechanical, magnetic as well as ultrasonic and diffraction methods can be applied as testing methods. The results of an interlaboratory test concerning the experimental determination of residual stresses in a railway track are included. Further, questions are analyzed concerning the in-service inspections of components and systems with regard to their operational safety and life. Measurement methods are explained by examples from power plant engineering, nuclear power plant engineering, construction and traffic engineering as well as aeronautics. (DG) [de

Student-Life Stress in Education and Health Service Majors

Science.gov (United States)

Zascavage, Victoria; Winterman, Kathleen G.; Buot, Max; Wies, Jennifer R.; Lyzinski, Natalie

2012-01-01

In order to better understand the effects of student-life stress on Education and Health Service majors (n = 195) at a private, religious, Midwestern university in the USA, we assessed student perception of overall stress level and physical stress level using the Student-life Stress Inventory. The targeted sample consisted of students with…

APPLICATION FRAMEWORK IN ENGINEERING SERVICE ORIENTED ARCHITECTURE SYSTEM SERVICE

Directory of Open Access Journals (Sweden)

Ade Hodijah

2017-03-01

Full Text Available The Service Engineering (SE is understood as a framework to create innovative services in application development of information technology approach to Service Oriented Architecture (SOA. Implementing SOA is required methodology to identify services that can be used again in the application and organization of a company. in this research, software development model used is object-oriented methodologies, SOA itself is a collection consisting of tools, technologies, frameworks, and best practices that facilitate the implementation of a service quickly. in a study this uses the tools of Business Process Management System (BPMS to support the implementation of service-oriented software. the purpose of this study is to produce a model of activities and artifacts of the application software development models of the SE with a case study Rate Loans. Validation to the design of the model is done through testing of the software produced. The results showed that the application of the SE in the development of service-oriented software can use the object-oriented methodology by providing additional value-added analysis and redesign of business processes to be implemented on a BPMS. BPMS usage of the application of the SE on the SOA has the advantage of visualization in the management of business processes.

Services performed by an engineering consultant

International Nuclear Information System (INIS)

Seyffert, L.

1984-01-01

In the near future, services for the nuclear power plants in operation will become particularly important. Already at the present stage, engineering firms contribute to the planning of revisions and repair work, to the design, procurement and project management of new components and subsystems, respectively; they delegate supporting engineering personnel for the execution of in-plant measures, create special EDP software, develop quality assurance systems and work on quality control. This enumeration presents a rough outline of the field of activities, although it is far from complete. Also, the lines are drawn rather artibrarily, leaving out, for instance, the extensive activities in the fields of waste management and fuel management. These are main activities of specialized engineering firms which will be the subject of a future report. (orig.) [de

Work-related stress and posttraumatic stress in emergency medical services.

Science.gov (United States)

Donnelly, Elizabeth

2012-01-01

Recent research efforts in emergency medical services (EMS) has identified variability in the ability of EMS personnel to recognize their level of stress-related impairment. Developing a better understanding of how workplace stress may affect EMS personnel is a key step in the process of increasing awareness of the impact of work-related stress and stress-related impairment. This paper demonstrates that for those in EMS, exposure to several types of workplace stressors is linked to stress reactions. Stress reactions such as posttraumatic stress symptomatology (PTSS) have the potential to negatively influence the health of EMS providers. This research demonstrates that two different types of work-related stress and alcohol use influence the development of PTSS. A probability sample of nationally registered emergency medical technician (EMT)-Basics and EMT-Paramedics (n = 1,633) completed an Internet-based survey. Respondents reported their levels of operational and organizational types of chronic stress, critical incident stress, alcohol use, and PTSS. Ordinary least squares regression illustrated that when demographic factors were controlled, organizational and operational forms of chronic stress, critical incident stress, and alcohol use were all significant predictors of PTSS (p stress and critical incident stress (p stress and alcohol use (p stress reaction. Higher levels of chronic stress, critical incident stress, and alcohol use significantly related to an increased level of PTSS. Further, for those reporting high levels of alcohol use or critical incident stress, interactions with high levels of chronic operational stress were associated with higher rates of PTSS. For those interested in the impact of work-related stress in EMS, these findings indicate that attention must be paid to levels of stress associated with both critical incident exposure as well as the chronic stress providers experience on a day-to-day basis.

HIGH SERVE '90 - nuclear engineering services

International Nuclear Information System (INIS)

Bauer, K.G.

1991-01-01

Nuclear engineering services do not start only with maintenance or repair, but already with the early detection of imminent problems long before they become problems. Services concerning the decommissioning of plants also belong to it. A selection of the extraordinary services rendered nowadays is presented in more than 20 papers in this booklet. These papers may roughly be divided into three groups of subjects: monitoring and operational management; maintenance, repair and improvements; radioactive waste treatment and management. The first group of subjects, in particular, covers papers dealing with early detection, monitoring and diagnosing systems, using highly advanced hard- and software technologies. Modernization of instrumentation and control systems and exchange of process computer systems is another task this service has to accomplish. Process computers of the past have developed into high performance process information systems. (orig./DG) [de

BPELPower—A BPEL execution engine for geospatial web services

Science.gov (United States)

Yu, Genong (Eugene); Zhao, Peisheng; Di, Liping; Chen, Aijun; Deng, Meixia; Bai, Yuqi

2012-10-01

The Business Process Execution Language (BPEL) has become a popular choice for orchestrating and executing workflows in the Web environment. As one special kind of scientific workflow, geospatial Web processing workflows are data-intensive, deal with complex structures in data and geographic features, and execute automatically with limited human intervention. To enable the proper execution and coordination of geospatial workflows, a specially enhanced BPEL execution engine is required. BPELPower was designed, developed, and implemented as a generic BPEL execution engine with enhancements for executing geospatial workflows. The enhancements are especially in its capabilities in handling Geography Markup Language (GML) and standard geospatial Web services, such as the Web Processing Service (WPS) and the Web Feature Service (WFS). BPELPower has been used in several demonstrations over the decade. Two scenarios were discussed in detail to demonstrate the capabilities of BPELPower. That study showed a standard-compliant, Web-based approach for properly supporting geospatial processing, with the only enhancement at the implementation level. Pattern-based evaluation and performance improvement of the engine are discussed: BPELPower directly supports 22 workflow control patterns and 17 workflow data patterns. In the future, the engine will be enhanced with high performance parallel processing and broad Web paradigms.

Re-engineering pre-employment check-up systems: a model for improving health services.

Science.gov (United States)

Rateb, Said Abdel Hakim; El Nouman, Azza Abdel Razek; Rateb, Moshira Abdel Hakim; Asar, Mohamed Naguib; El Amin, Ayman Mohammed; Gad, Saad abdel Aziz; Mohamed, Mohamed Salah Eldin

2011-01-01

The purpose of this paper is to develop a model for improving health services provided by the pre-employment medical fitness check-up system affiliated to Egypt's Health Insurance Organization (HIO). Operations research, notably system re-engineering, is used in six randomly selected centers and findings before and after re-engineering are compared. The re-engineering model follows a systems approach, focusing on three areas: structure, process and outcome. The model is based on six main components: electronic booking, standardized check-up processes, protected medical documents, advanced archiving through an electronic content management (ECM) system, infrastructure development, and capacity building. The model originates mainly from customer needs and expectations. The centers' monthly customer flow increased significantly after re-engineering. The mean time spent per customer cycle improved after re-engineering--18.3 +/- 5.5 minutes as compared to 48.8 +/- 14.5 minutes before. Appointment delay was also significantly decreased from an average 18 to 6.2 days. Both beneficiaries and service providers were significantly more satisfied with the services after re-engineering. The model proves that re-engineering program costs are exceeded by increased revenue. Re-engineering in this study involved multiple structure and process elements. The literature review did not reveal similar re-engineering healthcare packages. Therefore, each element was compared separately. This model is highly recommended for improving service effectiveness and efficiency. This research is the first in Egypt to apply the re-engineering approach to public health systems. Developing user-friendly models for service improvement is an added value.

Engineering and service activities in the Cogema group

International Nuclear Information System (INIS)

1998-03-01

This short document presents the engineering and service daughter companies of the Cogema group: SGN (nuclear engineering, fuel cycle, wastes and spent fuels management, decontamination and dismantling); Euriware group (advice, expertise and information systems in nuclear, pharmacy, petroleum, automotive and steel making industries); Game group (industrial maintenance in nuclear, chemistry, petroleum, automotive and steel making industries); Eurisys Mesures (nuclear measurements, instrumentation, radiation protection and nuclear imaging); SICN (mechanics); STMI and Socodei (nuclear cleansing and management of low level radioactive wastes); Krebs/Speichim (chemical engineering, divisions of SGN and Technip). (J.S.)

Stress and performance: do service orientation and emotional energy moderate the relationship?

Science.gov (United States)

Smith, Michael R; Rasmussen, Jennifer L; Mills, Maura J; Wefald, Andrew J; Downey, Ronald G

2012-01-01

The current study examines the moderating effect of customer service orientation and emotional energy on the stress-performance relationship for 681 U.S. casual dining restaurant employees. Customer service orientation was hypothesized to moderate the stress-performance relationship for Front-of-House (FOH) workers. Emotional energy was hypothesized to moderate stress-performance for Back-of-House (BOH) workers. Contrary to expectations, customer service orientation failed to moderate the effects of stress on performance for FOH employees, but the results supported that customer service orientation is likely a mediator of the relationship. However, the hypothesis was supported for BOH workers; emotional energy was found to moderate stress performance for these employees. This finding suggests that during times of high stress, meaningful, warm, and empathetic relationships are likely to impact BOH workers' ability to maintain performance. These findings have real-world implications in organizational practice, including highlighting the importance of developing positive and meaningful social interactions among workers and facilitating appropriate person-job fits. Doing so is likely to help in alleviating worker stress and is also likely to encourage worker performance.

Novel perspectives for the engineering of abiotic stress tolerance in plants.

Science.gov (United States)

Cabello, Julieta V; Lodeyro, Anabella F; Zurbriggen, Matias D

2014-04-01

Adverse environmental conditions pose serious limitations to agricultural production. Classical biotechnological approaches towards increasing abiotic stress tolerance focus on boosting plant endogenous defence mechanisms. However, overexpression of regulatory elements or effectors is usually accompanied by growth handicap and yield penalties due to crosstalk between developmental and stress-response networks. Herein we offer an overview on novel strategies with the potential to overcome these limitations based on the engineering of regulatory systems involved in the fine-tuning of the plant response to environmental hardships, including post-translational modifications, small RNAs, epigenetic control of gene expression and hormonal networks. The development and application of plant synthetic biology tools and approaches will add new functionalities and perspectives to genetic engineering programs for enhancing abiotic stress tolerance. Copyright © 2013 Elsevier Ltd. All rights reserved.

ON THE THREAT OF SUPPLIERS FOR THE ENGINEERING CONSULTING AND DESIGN SERVICES FIRMS

Directory of Open Access Journals (Sweden)

Gabriel Sorin STROE

2014-06-01

Full Text Available In the case of companies from engineering consulting and design services industry the classic models of analysis (e.g. Porter's five forces for structural analysis exhibit interesting aspects in comparison with the situation when applied to traditional services or industrial production firms, due to the distinctive characteristics of the industry. The purpose of this paper is to present a general overview of the engineering consulting and design industry also analyze different facets of the suppliers concept and their force and threat for the engineering services firms. The paper aims at analyzing the dual strategic role of aspecial type of suppliers for the engineering companies.

ETICS: the international software engineering service for the grid

Energy Technology Data Exchange (ETDEWEB)

Meglio, A D; Begin, M-E [CERN (Switzerland); Couvares, P [University of Wisconsin-Madison (United States); Ronchieri, E [INFN CNAF (Italy); Takacs, E [4D SOFT Ltd (Hungary)], E-mail: alberto.di.meglio@cern.ch

2008-07-15

The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects are using the software engineering services to build, validate and distribute their software. Finally a number of significant use and test cases will be described to show how ETICS can be used in particular to perform interoperability tests of grid middleware using the grid itself.

ETICS: the international software engineering service for the grid

Science.gov (United States)

Meglio, A. D.; Bégin, M.-E.; Couvares, P.; Ronchieri, E.; Takacs, E.

2008-07-01

The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects are using the software engineering services to build, validate and distribute their software. Finally a number of significant use and test cases will be described to show how ETICS can be used in particular to perform interoperability tests of grid middleware using the grid itself.

ETICS: the international software engineering service for the grid

International Nuclear Information System (INIS)

Meglio, A D; Begin, M-E; Couvares, P; Ronchieri, E; Takacs, E

2008-01-01

The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects are using the software engineering services to build, validate and distribute their software. Finally a number of significant use and test cases will be described to show how ETICS can be used in particular to perform interoperability tests of grid middleware using the grid itself

Outsourced design services lessons learned from LHC civil engineering

CERN Document Server

Watson, T

2003-01-01

In April 1996 CERN awarded three contracts for the provision of civil engineering design and site supervision services associated with the LHC Project. These three contracts with an average value at signature of 12MCHF were placed using the “two envelope” award system. Eight firms from six member states were integrated into three Joint Ventures. For Projects prior to the LHC, CERN would have carried out the design and supervision using in-house staff. The change to out-sourced services represented a major step for CERN. After seven years, the contracts are now coming to their conclusion. This paper aims to discuss the reasons why these contracts were originally implemented, the lessons than have been learnt over the last seven years and conclusions on how CERN could approach the need for civil engineering design services in the future.

Global polar geospatial information service retrieval based on search engine and ontology reasoning

Science.gov (United States)

Chen, Nengcheng; E, Dongcheng; Di, Liping; Gong, Jianya; Chen, Zeqiang

2007-01-01

In order to improve the access precision of polar geospatial information service on web, a new methodology for retrieving global spatial information services based on geospatial service search and ontology reasoning is proposed, the geospatial service search is implemented to find the coarse service from web, the ontology reasoning is designed to find the refined service from the coarse service. The proposed framework includes standardized distributed geospatial web services, a geospatial service search engine, an extended UDDI registry, and a multi-protocol geospatial information service client. Some key technologies addressed include service discovery based on search engine and service ontology modeling and reasoning in the Antarctic geospatial context. Finally, an Antarctica multi protocol OWS portal prototype based on the proposed methodology is introduced.

Residual Stress Analysis for Engineering Applications by Means of Neutron Diffraction

International Nuclear Information System (INIS)

Gndupel-Herold, Thomas; Brand, Paul C.; Prask, Henry J.

1999-01-01

The economic and scientific importance of neutron diffraction residual stress analysis has led to an increasing number of suitable instruments worldwide. Recently, a dedicated state-of-the-art diffractometer has been installed at the National Institute of Standards and Technology reactor. It has been used for a variety of measurements on basic and engineering stress problems. Among the most prominent examples that have been investigated are residual stresses in rails, weldments, and plasma-sprayed coatings

48 CFR 53.236-2 - Architect-engineer services (SF's 252 and 330).

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Architect-engineer... ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS Prescription of Forms 53.236-2 Architect-engineer...-engineer and related services: (a) SF 252 (Rev. 10/83), Architect-Engineer Contract. SF 252 is prescribed...

Power Product Equipment Technician: Outboard-Engine Systems and Service. Teacher Edition [and] Student Edition.

Science.gov (United States)

Hilley, Robert

This curriculum guide contains teacher and student materials for a course on outboard-engine boat systems and service for power product equipment technician occupations. The course contains the following four units of instruction: (1) Outboard-Engine Design and Identification; (2) Operation and Service of Engine-Support Systems; (3) Operation and…

Towards Trust Engineering for Opportunistic Cloud Services

DEFF Research Database (Denmark)

Kuada, Eric

2014-01-01

The systematic review methodology has been employed to review trust related studies in cloud computing. It was observed that trusted computing technologies and reputation based approaches are the main approaches to trust engineering in cloud computing. Also, trusted third party approaches...... and the deployment model play a significant role in enhancing trust between service providers and consumers. It was observed that the concept of trust is used loosely without any formal specification in cloud computing discussions and trust engineering in general. As a first step towards addressing this problem, we...... have contextualized the formal trust specification in multi-agent environments for cloud computing....

46 CFR 11.518 - Service requirements for chief engineer (limited oceans) of steam and/or motor vessels.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Service requirements for chief engineer (limited oceans... Requirements for Engineer Officer § 11.518 Service requirements for chief engineer (limited oceans) of steam... engineer (limited oceans) of steam and/or motor vessels is five years total service in the engineroom of...

SemMat: Federated Semantic Services Platform for Open materials Science and Engineering

Science.gov (United States)

2017-01-01

SEMMAT: FEDERATED SEMANTIC SERVICES PLATFORM FOR OPEN MATERIALS SCIENCE AND ENGINEERING WRIGHT STATE UNIVERSITY JANUARY 2017 FINAL TECHNICAL...COVERED (From - To) JUL 2013 – JUN 2016 4. TITLE AND SUBTITLE SemMat: FEDERATED SEMANTIC SERVICES PLATFORM FOR OPEN MATERIALS SCIENCE AND ENGINEERING...models to represent materials data. This provides a data exchange scheme for materials science , which also includes provenance information to promote

Staff Stress and Burnout in Intellectual Disability Services: Work Stress Theory and Its Application

Science.gov (United States)

Devereux, Jason; Hastings, Richard; Noone, Steve

2009-01-01

Background: Staff in intellectual disability services can be at risk of stress and burnout at work. Given that staff well-being has implications for the quality of life of the staff themselves and people with intellectual disabilities themselves, this is an important research and practical topic. In this paper, we review work stress theories that…

Engineering tolerance to industrially relevant stress factors in yeast cell factories.

Science.gov (United States)

Deparis, Quinten; Claes, Arne; Foulquié-Moreno, Maria R; Thevelein, Johan M

2017-06-01

The main focus in development of yeast cell factories has generally been on establishing optimal activity of heterologous pathways and further metabolic engineering of the host strain to maximize product yield and titer. Adequate stress tolerance of the host strain has turned out to be another major challenge for obtaining economically viable performance in industrial production. Although general robustness is a universal requirement for industrial microorganisms, production of novel compounds using artificial metabolic pathways presents additional challenges. Many of the bio-based compounds desirable for production by cell factories are highly toxic to the host cells in the titers required for economic viability. Artificial metabolic pathways also turn out to be much more sensitive to stress factors than endogenous pathways, likely because regulation of the latter has been optimized in evolution in myriads of environmental conditions. We discuss different environmental and metabolic stress factors with high relevance for industrial utilization of yeast cell factories and the experimental approaches used to engineer higher stress tolerance. Improving stress tolerance in a predictable manner in yeast cell factories should facilitate their widespread utilization in the bio-based economy and extend the range of products successfully produced in large scale in a sustainable and economically profitable way. © FEMS 2017.

Engineering tolerance to industrially relevant stress factors in yeast cell factories

Science.gov (United States)

Deparis, Quinten; Claes, Arne; Foulquié-Moreno, Maria R.

2017-01-01

Abstract The main focus in development of yeast cell factories has generally been on establishing optimal activity of heterologous pathways and further metabolic engineering of the host strain to maximize product yield and titer. Adequate stress tolerance of the host strain has turned out to be another major challenge for obtaining economically viable performance in industrial production. Although general robustness is a universal requirement for industrial microorganisms, production of novel compounds using artificial metabolic pathways presents additional challenges. Many of the bio-based compounds desirable for production by cell factories are highly toxic to the host cells in the titers required for economic viability. Artificial metabolic pathways also turn out to be much more sensitive to stress factors than endogenous pathways, likely because regulation of the latter has been optimized in evolution in myriads of environmental conditions. We discuss different environmental and metabolic stress factors with high relevance for industrial utilization of yeast cell factories and the experimental approaches used to engineer higher stress tolerance. Improving stress tolerance in a predictable manner in yeast cell factories should facilitate their widespread utilization in the bio-based economy and extend the range of products successfully produced in large scale in a sustainable and economically profitable way. PMID:28586408

Motivation and reward systems in service provision: exploring motivators for people providing engineering services

DEFF Research Database (Denmark)

Kreye, Melanie; Nandrup-Bus, Troels

2015-01-01

It is becoming a distinctive feature for manufacturing firms to compete strategically through service provision. In relation to reward systems the aim of this thesis is to investigate what motivates employees of servitized manufacturing firms when providing engineering services and why. Through...... quantitative and qualitative data collection with an international company within the European healthcare sector, the findings show that key motivating factors were to “delight” the customer and being able to take responsibility and accountability for ones work. Service employees were found to feel proud...

Engineering factors influencing Corbicula fouling in nuclear-service water systems

International Nuclear Information System (INIS)

Henager, C.H.; Johnson, K.I.; Page, T.L.

1983-06-01

Corbicula fouling is a continuing problem in nuclear-service water systems. More knowledge of biological and engineering factors is needed to develop effective detection and control methods. A data base on Corbicula fouling was compiled from nuclear and non-nuclear power stations and industries using raw water. This data base was used in an analysis to identify systems and components which are conducive to fouling by Corbicula. Bounds on several engineering parameters such as velocity and temperature which support Corbicula growth are given. Service water systems found in BWR and PWR reactors are listed and those that show fouling are identified. Possible safety implications of Corbicula fouling are discussed for specific service water systems. Several effective control methods in current use include backflushing with heated water, centrifugal strainers, and continuous chlorination during spawning seasons

Exploring, Documenting, and Improving Humanitarian Service Learning through Engineers Without Borders USA

OpenAIRE

Buchanan, Elizabeth; Berg, Devin; Lee, Tina; Buchanan, Elizabeth; Lacksonen, Tom

2017-01-01

Exploring, Documenting, and Improving Humanitarian Service Learning through Engineers without Borders-USA is a four-year project exploring a variety of challenges and opportunities in university-based service learning programs. Specifically, this project looks holistically at the inception and evolution of a new Engineers Without Borders USA chapter, while analyzing characteristics, values, and demographics of individuals involved in EWB community-based humanitarian projects in multiple chapt...

Motivation and reward systems in service provision: exploring motivators for people providing engineering services

OpenAIRE

Kreye, Melanie; Nandrup-Bus, Troels

2015-01-01

It is becoming a distinctive feature for manufacturing firms to compete strategically through service provision. In relation to reward systems the aim of this thesis is to investigate what motivates employees of servitized manufacturing firms when providing engineering services and why. Through quantitative and qualitative data collection with an international company within the European healthcare sector, the findings show that key motivating factors were to “delight” the customer and being ...

DIESEL ENGINE SYSTEMS. AGRICULTURAL MACHINERY--SERVICE OCCUPATIONS, MODULE NUMBER 15.

Science.gov (United States)

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

ONE OF A SERIES DESIGNED TO HELP TEACHERS PREPARE POSTSECONDARY STUDENTS FOR AGRICULTURAL MACHINERY SERVICE OCCUPATIONS AS PARTS MEN, MECHANICS, MECHANIC'S HELPERS, AND SERVICE SUPERVISORS, THIS GUIDE AIMS TO DEVELOP STUDENT UNDERSTANDING OF THE CONSTRUCTION AND OPERATING PRINCIPLES OF DIESEL ENGINES. IT WAS DEVELOPED BY A NATIONAL TASK FORCE ON…

Business process re-engineering in service operations

International Nuclear Information System (INIS)

McClintock, J.W.

1995-01-01

The concept of business process re-engineering, and how it was applied to the operations of the Consumers Gas Company were discussed. Business process re-engineering was defined as the improvement of the efficiency of the customer-service process, and the overall improvement of practices and operations. The re-engineering project was said to involve a thorough analysis of information technology, current limitations, and business operational needs, undertaken on an enterprise-wide basis. Viewed generically,a re-engineering project was said to have six major components: (1) business drivers (i.e. the articulation of the Company's strategic issues); (2) benchmark measures; (3) future state process models; (4) cost/benefit analysis; (5) a change management plan; and (6) a development plan. Business improvements expected to result from the project include reduced cost of operation, reduction of waste, and a substantially complete re-design of the business process. Management of the project involved a team approach, and help of a consultant to identify the scope of the re-design, its limitations, and future state. A life expectancy of approximately 10 years was given for the re-engineering plan, with annual benefits (in terms of cost reduction) of $4.6 million by the year 2000

Web Services as Product Experience Augmenters and the Implications for Requirements Engineering: A Position Paper

NARCIS (Netherlands)

van Eck, Pascal; Nijholt, Antinus; Wieringa, Roelf J.

There is currently little insight into what requirement engineering for web services is and in which context it will be carried out. In this position paper, we investigate requirements engineering for a special kind of web services, namely web services that are used to augment the perceived value of

Stress markers in relation to job strain in human service organizations.

Science.gov (United States)

Ohlson, C G; Söderfeldt, M; Söderfeldt, B; Jones, I; Theorell, T

2001-01-01

Workers in human service organizations are often confronted with conflicting demands in providing care or education. The aim of this cross-sectional study was to relate levels of endocrine stress markers to perceived job strain in two human service organizations. Employees in two local units of the social insurance organization and two local units of the individual and family care sections of the social welfare in Sweden were selected and 103 employees participated (56% participation rate). The perceived job strain was assessed with a standardized questionnaire containing questions of the demand-control model. Questions specially designed to measure emotional demands were also included. The stress markers cortisol, prolactin, thyroid-stimulating hormone, testosterone and IgA and IgG were analysed in blood samples. The main finding was an association between high emotional strain and increased levels of prolactin. The levels of cortisol, but none of the other four stress markers, increased slightly with emotional strain. Emotional strain experienced in human service work may cause psychological stress. The increase in prolactin was modest but consistent with findings in other published studies on stress-related endocrine alterations. Copyright 2001 S. Karger AG, Basel.

Residual stress analysis in linear friction welded in-service Inconel 718 superalloy via neutron diffraction and contour method approaches

Energy Technology Data Exchange (ETDEWEB)

Smith, M. [University of British Columbia – Okanagan, School of Engineering, 3333 University Way, Kelowna, Canada V1V 1V7 (Canada); Levesque, J.-B. [Institut de recherche d' Hydro-Québec (IREQ), 1800 Lionel-Boulet Blvd., Varennes, Canada J3X 1S1 (Canada); Bichler, L., E-mail: lukas.bichler@ubc.ca [University of British Columbia – Okanagan, School of Engineering, 3333 University Way, Kelowna, Canada V1V 1V7 (Canada); Sediako, D. [Canadian Nuclear Laboratories, Building 459, Station 18, Chalk River, Canada K0J 1J0 (Canada); Gholipour, J.; Wanjara, P. [National Research Council of Canada, Aerospace 5145 Decelles Ave., Montreal, Canada H3T 2B2 (Canada)

2017-04-13

In this study, an analysis of elastic residual stress in Inconel{sup ®} 718 (IN 718) linear friction welds (LFWs) was carried out. In particular, the suitability of LFW for manufacturing and repair of aero engine components was emulated by joining virgin and in-service (extracted from a turbine disk) materials. The evolution in the residual strains and stresses in the heat-affected zone (HAZ), thermomechanically affected zone (TMAZ) and dynamically recrystallized zone (DRX) of the weld was characterized using the neutron diffraction and contour methods. The results provided insight into diverse challenges in quantitative analysis of residual stresses in welded IN 718 using diffraction techniques. Specifically, judicious selection of the beam width, height and stress-free lattice spacing were seen to be crucial to minimize measurement error and increase accuracy. Further, the contour method – a destructive technique relying on capturing the stress relaxation after electrical discharge machining – was used to characterize the residual stress distribution on two-dimensional plane sections of the welds. Both techniques suggested an increasing magnitude of residual stress originating from the base metal that reached a peak at the weld interface. Both methods indicated that the peak magnitude of residual stresses were below the yield stress of IN 718.

Motion and Stress Analysis of Cam System for Marine Diesel Engine 93 KW

Directory of Open Access Journals (Sweden)

Christian Dhani Setiawan

2017-01-01

Full Text Available The developments of maritime sector in Indonesia shows increasing demand for ships. Especially ships with size of 30 GT has problem with low availability of the ship engine, which most of the ships still use non marine diesel engine as its main propulsion. The problem gives interest to make a step to improve by design marine diesel engine using reverse engineering method. Cam system of marine diesel engine design was needed to be calculate to select the material and the motion. The design of cam system needs study about the stress analysis in cam system to make sure the distribution of force and moment. The result of stress analysis was used to select material of components in cam system. The motion analysis result was used to be input data of stress analysis. The condition to obtain the stress of components was on maximum condition, its contain pressure, torque, rotation, and force. All component that calculated are camshaft, lifter (flat-tappet, push rod, rocker arm, spring, and valve. Each component was given two different materials and material selection was based on safety factor of each component. Material for camshaft and lifter were malleable cast iron, for push rod and rocker arm were mild steel, for spring was ASTM A231, for intake valve was steel JIS SUH3, and for exhaust valve was steel JIS SUH35. The result of motion analysis were angular velocity of camshaft with value was 2400 deg/sec, friction force between camshaft and lifter with maximum value was 125.393 N, and contact force between camshaft and lifter with maximum value was 845.307 N, and linear velocity of intake valve with maximum value was 696.573 mm/s, and linear velocity of exhaust valve was 463.734 mm/s.

An overview of game-based learning in building services engineering education

Science.gov (United States)

Alanne, Kari

2016-03-01

To ensure proper competence development and short graduation times for engineering students, it is essential that the study motivation is encouraged by new learning methods. In game-based learning, the learner's engagement is increased and learning is made meaningful by applying game-like features such as competition and rewarding through virtual promotions or achievement badges. In this paper, the state of the art of game-based learning in building services engineering education at university level is reviewed and discussed. A systematic literature review indicates that educational games have been reported in the field of related disciplines, such as mechanical and civil engineering. The development of system-level educational games that realistically simulate work life in building services engineering is still in its infancy. Novel rewarding practices and more comprehensive approaches entailing the state-of-the-art information tools such as building information modelling, geographic information systems, building management systems and augmented reality are needed in the future.

Internal Stress Monitoring of In-Service Structural Steel Members with Ultrasonic Method.

Science.gov (United States)

Li, Zuohua; He, Jingbo; Teng, Jun; Wang, Ying

2016-03-23

Internal stress in structural steel members is an important parameter for steel structures in their design, construction, and service stages. However, it is hard to measure via traditional approaches. Among the existing non-destructive testing (NDT) methods, the ultrasonic method has received the most research attention. Longitudinal critically refracted (Lcr) waves, which propagate parallel to the surface of the material within an effective depth, have shown great potential as an effective stress measurement approach. This paper presents a systematic non-destructive evaluation method to determine the internal stress in in-service structural steel members using Lcr waves. Based on theory of acoustoelasticity, a stress evaluation formula is derived. Factor of stress to acoustic time difference is used to describe the relationship between stress and measurable acoustic results. A testing facility is developed and used to demonstrate the performance of the proposed method. Two steel members are measured by using the proposed method and the traditional strain gauge method for verification. Parametric studies are performed on three steel members and the aluminum plate to investigate the factors that influence the testing results. The results show that the proposed method is effective and accurate for determining stress in in-service structural steel members.

Internal Stress Monitoring of In-Service Structural Steel Members with Ultrasonic Method

Science.gov (United States)

Li, Zuohua; He, Jingbo; Teng, Jun; Wang, Ying

2016-01-01

Internal stress in structural steel members is an important parameter for steel structures in their design, construction, and service stages. However, it is hard to measure via traditional approaches. Among the existing non-destructive testing (NDT) methods, the ultrasonic method has received the most research attention. Longitudinal critically refracted (Lcr) waves, which propagate parallel to the surface of the material within an effective depth, have shown great potential as an effective stress measurement approach. This paper presents a systematic non-destructive evaluation method to determine the internal stress in in-service structural steel members using Lcr waves. Based on theory of acoustoelasticity, a stress evaluation formula is derived. Factor of stress to acoustic time difference is used to describe the relationship between stress and measurable acoustic results. A testing facility is developed and used to demonstrate the performance of the proposed method. Two steel members are measured by using the proposed method and the traditional strain gauge method for verification. Parametric studies are performed on three steel members and the aluminum plate to investigate the factors that influence the testing results. The results show that the proposed method is effective and accurate for determining stress in in-service structural steel members. PMID:28773347

Job stress models, depressive disorders and work performance of engineers in microelectronics industry.

Science.gov (United States)

Chen, Sung-Wei; Wang, Po-Chuan; Hsin, Ping-Lung; Oates, Anthony; Sun, I-Wen; Liu, Shen-Ing

2011-01-01

Microelectronic engineers are considered valuable human capital contributing significantly toward economic development, but they may encounter stressful work conditions in the context of a globalized industry. The study aims at identifying risk factors of depressive disorders primarily based on job stress models, the Demand-Control-Support and Effort-Reward Imbalance models, and at evaluating whether depressive disorders impair work performance in microelectronics engineers in Taiwan. The case-control study was conducted among 678 microelectronics engineers, 452 controls and 226 cases with depressive disorders which were defined by a score 17 or more on the Beck Depression Inventory and a psychiatrist's diagnosis. The self-administered questionnaires included the Job Content Questionnaire, Effort-Reward Imbalance Questionnaire, demography, psychosocial factors, health behaviors and work performance. Hierarchical logistic regression was applied to identify risk factors of depressive disorders. Multivariate linear regressions were used to determine factors affecting work performance. By hierarchical logistic regression, risk factors of depressive disorders are high demands, low work social support, high effort/reward ratio and low frequency of physical exercise. Combining the two job stress models may have better predictive power for depressive disorders than adopting either model alone. Three multivariate linear regressions provide similar results indicating that depressive disorders are associated with impaired work performance in terms of absence, role limitation and social functioning limitation. The results may provide insight into the applicability of job stress models in a globalized high-tech industry considerably focused in non-Western countries, and the design of workplace preventive strategies for depressive disorders in Asian electronics engineering population.

What to Do about Being Overwhelmed: Graduate Students, Stress and University Services

Science.gov (United States)

Oswalt, Sara B.; Riddock, Christina C.

2007-01-01

Few studies have examined graduate students and stress. At a large, Southeastern university, 223 graduate students completed a survey about factors contributing their stress, current coping strategies and related university services. A majority felt stressed (48.9%) or very stressed (24.7%). There were significant differences in coping strategies…

Engineering Compensations in Web Service Environment

DEFF Research Database (Denmark)

Schäfer, Micahel; Dolog, Peter; Nejdl, Wolfgang

2007-01-01

Business to business integration has recently been performed by employing Web service environments. Moreover, such environments are being provided by major players on the technology markets. Those environments are based on open specifications for transaction coordination. When a failure in such a......Business to business integration has recently been performed by employing Web service environments. Moreover, such environments are being provided by major players on the technology markets. Those environments are based on open specifications for transaction coordination. When a failure...... in such an environment occurs, a compensation can be initiated to recover from the failure. However, current environments have only limited capabilities for compensations, and are usually based on backward recovery. In this paper, we introduce an engineering approach and an environment to deal with advanced...... compensations based on forward recovery principles. We extend the existing Web service transaction coordination architecture and infrastructure in order to support flexible compensation operations. A contract-based approach is being used, which allows the specification of permitted compensations at runtime. We...

Deployment of e-health services - a business model engineering strategy.

Science.gov (United States)

Kijl, Björn; Nieuwenhuis, Lambert J M; Huis in 't Veld, Rianne M H A; Hermens, Hermie J; Vollenbroek-Hutten, Miriam M R

2010-01-01

We designed a business model for deploying a myofeedback-based teletreatment service. An iterative and combined qualitative and quantitative action design approach was used for developing the business model and the related value network. Insights from surveys, desk research, expert interviews, workshops and quantitative modelling were combined to produce the first business model and then to refine it in three design cycles. The business model engineering strategy provided important insights which led to an improved, more viable and feasible business model and related value network design. Based on this experience, we conclude that the process of early stage business model engineering reduces risk and produces substantial savings in costs and resources related to service deployment.

Experience in accident liquidation at the Chernobyl' NPP and problems of organization of the emergency-engineering service

International Nuclear Information System (INIS)

Andreev, Yu.B.; Samojlenko, Yu.N.

1989-01-01

The efficiency of measures realized in order to eliminate the Chernobyl' accident effects is estimated. The principles of organization of the emergency-engineering service for accident elimination in nuclear power engineering are described. The automated information safety system should from the technical basis for this service. The information system structure is determined. The list of main directions of research and design works realized in the emergency-engineering service interests is given. It is noted that all parts of the emergency-engineering service must prepare the plants of works together with the USSR civil defense service, and they should interact in the process of accident elimination basing on coordinated organizational and technical solutions

Impact of Predisposing Factors on Academic Stress among Pre-Service Teachers

Directory of Open Access Journals (Sweden)

Pershaanbala Balakrishnan

2017-10-01

Full Text Available Background: Many studies have been done on stress among educators. Teachers, lecturers, and tutors all over the world has been brought into attention when it comes to stress related issues. Our purpose was to investigate the level of academic stress among pre-service teachers in a teaching education institution in Perak, Malaysia. Methods: In this study a cross-sectional comparative survey study was conducted on pre-service teachers from a teacher education institution. The variables that was tested and correlated throughout the study are age, gender, and marital status, and medical history, influence of medications, exercise and social lifestyle. Data was collected through questionnaires to find out the outcome. Descriptive data analysis was used to describe the socio-demographic data. Correlation analysis was used to determine the significant relation between the variables. P<0.05 was considered as significant of the study. Results: Majority of the students, 78.4% represent the severe category of distress according to the Kessler scale. The remaining 13.6% were recorded as being under mild and 7.6% (n=19 under moderate category of distress. Regrettably, less than 1% (n=1 of the pre-service teachers were from the well category. Exercise was found to be significantly associated with the prevalence of severe psychological distress. Simple logistic regressions showed that pre-service teachers who exercised had a significant 91% reduced risk for psychological distress (OR=0.09; 95% CI=0.02, 0.35 compared to those who doesn’t exercise. Conclusion: At the end of this study, a better understanding on the predisposing factors of academic stress among pre-service teachers was determined and therefore interventions on coping with stress can be made simple. Various physiotherapy interventions on preventive and corrective measures were suggested with reference to the results.

Agile Service Development: A Rule-Based Method Engineering Approach

NARCIS (Netherlands)

dr. Martijn Zoet; Stijn Hoppenbrouwers; Inge van de Weerd; Johan Versendaal

2011-01-01

Agile software development has evolved into an increasingly mature software development approach and has been applied successfully in many software vendors’ development departments. In this position paper, we address the broader agile service development. Based on method engineering principles we

Modelling of composition and stress profiles in low temperature surface engineered stainless steel

DEFF Research Database (Denmark)

Jespersen, Freja Nygaard; Hattel, Jesper Henri; Somers, Marcel A. J.

2015-01-01

temperature, time and gas composition is a prerequisite for targeted process optimization. A realistic model to simulate the developing case has to take the following influences on composition and stress into account: - a concentration dependent diffusion coefficient - trapping of nitrogen by chromium atoms...... stresses are introduced in the developing case, arising from the volume expansion that accompanies the dissolution of high interstitial contents in expanded austenite. Modelling of the composition and stress profiles developing during low temperature surface engineering from the processing parameters...... - the effect of residual stress on diffusive flux - the effect of residual stress on solubility of interstitials - plastic accommodation of residual stress. The effect of all these contributions on composition and stress profiles will be addressed....

Design prediction for long term stress rupture service of composite pressure vessels

Science.gov (United States)

Robinson, Ernest Y.

1992-01-01

Extensive stress rupture studies on glass composites and Kevlar composites were conducted by the Lawrence Radiation Laboratory beginning in the late 1960's and extending to about 8 years in some cases. Some of the data from these studies published over the years were incomplete or were tainted by spurious failures, such as grip slippage. Updated data sets were defined for both fiberglass and Kevlar composite stand test specimens. These updated data are analyzed in this report by a convenient form of the bivariate Weibull distribution, to establish a consistent set of design prediction charts that may be used as a conservative basis for predicting the stress rupture life of composite pressure vessels. The updated glass composite data exhibit an invariant Weibull modulus with lifetime. The data are analyzed in terms of homologous service load (referenced to the observed median strength). The equations relating life, homologous load, and probability are given, and corresponding design prediction charts are presented. A similar approach is taken for Kevlar composites, where the updated stand data do show a turndown tendency at long life accompanied by a corresponding change (increase) of the Weibull modulus. The turndown characteristic is not present in stress rupture test data of Kevlar pressure vessels. A modification of the stress rupture equations is presented to incorporate a latent, but limited, strength drop, and design prediction charts are presented that incorporate such behavior. The methods presented utilize Cartesian plots of the probability distributions (which are a more natural display for the design engineer), based on median normalized data that are independent of statistical parameters and are readily defined for any set of test data.

Information needs of engineers. The methodology developed by the WFEO Committee on Engineering Information and the use of value analysis for improving information services

International Nuclear Information System (INIS)

Darjoto, S.W.; Martono, A.; Michel, J.

1990-05-01

The World Federation of Engineering Organizations - WFEO - through the work of its Committee on Engineering Information, aims at improving the efficiency of engineers and particularly at developing new attitudes and practices concerning the specialized information mastering. One important part of the WFEO/CEI programme of activities during the last years and for the next years was and is devoted to a better understanding of the information needs of engineers. But also, it seems now essential to WFEO/CEI to better evaluate information services in order to correctly adapt them to the identified needs of engineers. The following communication will emphasize these two main and related perspectives: identifying the information needs of engineers; developing Value Analysis approaches for engineering information services. (author). 3 refs

Information needs of engineers. The methodology developed by the WFEO Committee on Engineering Information and the use of value analysis for improving information services

Energy Technology Data Exchange (ETDEWEB)

Darjoto, S W [Indonesian Inst. of Sciences, Bandung (Indonesia); Martono, A [Indonesian Inst. of Engineers, Jakarta (Indonesia); Michel, J [Ecole Nationale des Ponts et Chaussees, Paris (France)

1990-05-01

The World Federation of Engineering Organizations - WFEO - through the work of its Committee on Engineering Information, aims at improving the efficiency of engineers and particularly at developing new attitudes and practices concerning the specialized information mastering. One important part of the WFEO/CEI programme of activities during the last years and for the next years was and is devoted to a better understanding of the information needs of engineers. But also, it seems now essential to WFEO/CEI to better evaluate information services in order to correctly adapt them to the identified needs of engineers. The following communication will emphasize these two main and related perspectives: identifying the information needs of engineers; developing Value Analysis approaches for engineering information services. (author). 3 refs.

Service Life Of Main Piping Component Due To Low Thermal Stresses.Fatigue

International Nuclear Information System (INIS)

Miroshnik, R.; Jeager, A.; Ben Haim, H.

1998-01-01

The paper deals with estimating the service life of the power station Main piping component and describing the repair process for extending of its service life. After a long period of service, several circular fatigue cracks have been discovered at the bottom of the Main piping component chamber. Finite element analyses of transient thermal stresses, caused by power station startup, are carried out in the paper. The calculation results show good agreement between the theoretical locations of the maximum stresses and the actual locations of the cracks. There is a good agreement between theoretical evaluation and actual service life, as well. The possibility of machining out the cracks in order to prevent their growing is examined here. The machining enables us to extend the power station component's life service

ETICS the international software engineering service for the grid

CERN Document Server

Di Meglio, A; Couvares, P; Ronchieri, E; Takács, E

2008-01-01

The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects ...

An IMP interaction approach to modelling business-to-business professional service quality: the case of Hong Kong consulting engineering service

OpenAIRE

Woo, Ka-shing

2001-01-01

In the domain of services marketing, the most researched area is in service quality. Since the pioneering stage of service quality research in the early 1980s, most of the studies have been conducted in the context of consumer services and consumer professional services. The purpose of this study is to bridge the gap in the existing literature to measure service quality of a particular business-to-business professional service industry (i.e., Hong Kong consulting engineering industry). I...

46 CFR 11.522 - Service requirements for assistant engineer (limited oceans) of steam and/or motor vessels.

Science.gov (United States)

2010-10-01

... oceans) of steam and/or motor vessels. 11.522 Section 11.522 Shipping COAST GUARD, DEPARTMENT OF HOMELAND... Requirements for Engineer Officer § 11.522 Service requirements for assistant engineer (limited oceans) of... assistant engineer (limited oceans) of steam and/or motor vessels is three years of service in the...

Performance-based service acquisition (PBSA) of TRIDENT strategic weapons systems (SWS) technical engineering support (TES) services

OpenAIRE

Arcidiacono, William J.

2003-01-01

CIVINS (Civilian Institutions) Thesis document Approved for public release ; distribution is unlimited The objective of this thesis is to determine whether the Strategic Systems Programs (SSP) should apply the concepts of Performance-Based Service Acquisition (PBSA) to Strategic Weapons Systems (SWS) Technical Engineering Support (TES) Services. This thesis provides a Department of Defense (DoD), Department of the Navy (DON), and SSP SWS program acquisition and PBSA history background, ...

Analysis of thermal stress of the piston during non-stationary heat flow in a turbocharged Diesel engine

Science.gov (United States)

Gustof, P.; Hornik, A.

2016-09-01

In the paper, numeric calculations of thermal stresses of the piston in a turbocharged Diesel engine in the initial phase of its work were carried out based on experimental studies and the data resulting from them. The calculations were made using a geometrical model of the piston in a five-cylinder turbocharged Diesel engine with a capacity of about 2300 cm3, with a direct fuel injection to the combustion chamber and a power rating of 85 kW. In order to determine the thermal stress, application of own mathematical models of the heat flow in characteristic surfaces of the piston was required to show real processes occurring on the surface of the analysed component. The calculations were performed using a Geostar COSMOS/M program module. A three-dimensional geometric model of the piston was created in this program based on a real component, in order to enable the calculations and analysis of thermal stresses during non-stationary heat flow. Modelling of the thermal stresses of the piston for the engine speed n=4250 min-1 and engine load λ=1.69 was carried out.

UFISA: electric facility engineering for the service of emergy market

International Nuclear Information System (INIS)

Gutierrez Zapico, A.

1997-01-01

UFISA is the engineering company with the experience of UNION ELECTRICA FENOSA S.A. It activity began in 1990. This company offers to national and international markets the services for energy consumers and for the electricity costumers. (Author)

Multiple Learning Strategies Project. Small Engine Repair Service. Regular Vocational. [Vol. 1.

Science.gov (United States)

Pitts, Jim; And Others

This instructional package is one of two designed for use by regular vocational students in the vocational area of small engine repair service. Contained in this document are forty-four learning modules organized into ten units: engine block; air cleaner; starters; fuel tanks; lines, filters, and pumps; carburetors; electrical; magneto systems;…

Computerized system for hospital engineering service management

International Nuclear Information System (INIS)

Centeno, C A; Gonzalez, E A; Cagnolo, F J; Olmos, C E

2007-01-01

When a Hospital Engineering Service (HES) is implemented within a health care environment, the idea is to improve service conditions and costs as well as to provide timely responses to equipment preventive maintenance and infrastructure requirements. An HES must, within the shortest possible period of time, meet the above requirements at the cost necessary to provide the service quality sought. In many cases there is a lack of minimal materials and staff who are qualified to attain the objectives that have been set. Therefore, external assistance becomes necessary. In this context, actions are often taken which, because they are not recorded, cannot be assessed in order to evaluate the HES. Since all action taken is appraised from the purely economic point of view, in the final analysis the contributions from staff remain invisible. This situation works against the possibility of quantifying the convenience of possessing an internal HES. The software support system we have developed here is oriented toward providing all the necessary data to address this issue

Association between perceived stress, multimorbidity and primary care health services: a Danish population-based cohort study.

Science.gov (United States)

Prior, Anders; Vestergaard, Mogens; Larsen, Karen Kjær; Fenger-Grøn, Morten

2018-02-24

Mental stress is common in the general population. Mounting evidence suggests that mental stress is associated with multimorbidity, suboptimal care and increased mortality. Delivering healthcare in a biopsychosocial context is key for general practitioners (GPs), but it remains unclear how persons with high levels of perceived stress are managed in primary care. We aimed to describe the association between perceived stress and primary care services by focusing on mental health-related activities and markers of elective/acute care while accounting for mental-physical multimorbidity. Population-based cohort study. Primary healthcare in Denmark. 118 410 participants from the Danish National Health Survey 2010 followed for 1 year. Information on perceived stress and lifestyle was obtained from a survey questionnaire. Information on multimorbidity was obtained from health registers. General daytime consultations, out-of-hours services, mental health-related services and chronic care services in primary care obtained from health registers. Perceived stress levels were associated with primary care activity in a dose-response relation when adjusted for underlying conditions, lifestyle and socioeconomic factors. In the highest stress quintile, 6.8% attended GP talk therapy (highest vs lowest quintile, adjusted incidence rate ratios (IRR): 4.96, 95% CI 4.20 to 5.86), 3.3% consulted a psychologist (IRR: 6.49, 95% CI 4.90 to 8.58), 21.5% redeemed an antidepressant prescription (IRR: 4.62, 95% CI 4.03 to 5.31), 23.8% attended annual chronic care consultations (IRR: 1.22, 95% CI 1.16 to 1.29) and 26.1% used out-of-hours services (IRR: 1.47, 95% CI 1.51 to 1.68). For those with multimorbidity, stress was associated with more out-of-hours services, but not with more chronic care services. Persons with high stress levels generally had higher use of primary healthcare, 4-6 times higher use of mental health-related services (most often in the form of psychotropic drug

An analysis on the marketing of engineering services for the cement manufacturing industry in Sub-Saharan Africa

CSIR Research Space (South Africa)

Meyer, JAM

2017-09-01

Full Text Available South African organisations that offer engineering services to the local and foreign market contribute significantly towards South Africa’s overall Gross Domestic Product (GDP). The importance of engineering services in South Africa motivates...

Applied Ontology Engineering in Cloud Services, Networks and Management Systems

CERN Document Server

Serrano Orozco, J Martín

2012-01-01

Metadata standards in today’s ICT sector are proliferating at unprecedented levels, while automated information management systems collect and process exponentially increasing quantities of data. With interoperability and knowledge exchange identified as a core challenge in the sector, this book examines the role ontology engineering can play in providing solutions to the problems of information interoperability and linked data. At the same time as introducing basic concepts of ontology engineering, the book discusses methodological approaches to formal representation of data and information models, thus facilitating information interoperability between heterogeneous, complex and distributed communication systems. In doing so, the text advocates the advantages of using ontology engineering in telecommunications systems. In addition, it offers a wealth of guidance and best-practice techniques for instances in which ontology engineering is applied in cloud services, computer networks and management systems. �...

Service Cart For Engines

Science.gov (United States)

Ng, Gim Shek

1995-01-01

Cart supports rear-mounted air-cooled engine from Volkswagen or Porsche automobile. One person removes, repairs, tests, and reinstalls engine of car, van, or home-built airplane. Consists of framework of wood, steel, and aluminum components supported by four wheels. Engine lifted from vehicle by hydraulic jack and gently lowered onto waiting cart. Jack removed from under engine. Rear of vehicle raised just enough that engine can be rolled out from under it. Cart easily supports 200-lb engine. Also used to hold transmission. With removable sheet-metal top, cart used as portable seat.

[Association between sense of coherence and occupational stress of workers in modern service industry in Shanghai, China].

Science.gov (United States)

Lu, X Y; Dai, J M; Wu, N; Shu, C; Gao, J L; Fu, H

2016-10-20

Objective: To investigate understand the current status of the sense of coherence and occupational stress in modern service workers, and to analyze the association between occupational stress and the sense of coherence. Methods: From March to April, 2016, 834 modern service workers from 3 companies in Shanghai, China (in air transportation industry, marketing industry, and travel industry) were surveyed by non-ran-dom sampling. The self-completion questionnaires were filled out anonymously given the informed consent of the workers. The occupational stress questionnaire was used to evaluate occupational stress, and the Chinese version of the Sense of Coherence Scale (SOC-13) was used to assess the mental health. Results: The mean score for the sense of coherence of the respondents was 61.54±10.46, and 50.1% of them were self-rated as having occupational stress. There were significant differences in SOC score between groups with different ages, marital status, positions, lengths of service, family per capita monthly income, and weekly work hours ( P occupational stress score differed significantly across groups with different marital status, lengths of service, and weekly work hours ( P occupational stress differed significantly between groups with different SOC levels ( Poccupational stress. High SOC is a protective factor for occupational stress ( OR =0.39, 95% CI 0.26~ 0.59). Conclusion: Modern service workers in Shanghai have high SOC and moderate occupational stress. Therefore, improving SOC may reduce occupational stress.

Self-stress control of real civil engineering tensegrity structures

Science.gov (United States)

Kłosowska, Joanna; Obara, Paulina; Gilewski, Wojciech

2018-01-01

The paper introduces the impact of the self-stress level on the behaviour of the tensegrity truss structures. Displacements for real civil engineering tensegrity structures are analysed. Full-scale tensegrity tower Warnow Tower which consists of six Simplex trusses is considered in this paper. Three models consisting of one, two and six modules are analysed. The analysis is performed by the second and third order theory. Mathematica software and Sofistik programme is applied to the analysis.

Engineering Web Applications

DEFF Research Database (Denmark)

Casteleyn, Sven; Daniel, Florian; Dolog, Peter

Nowadays, Web applications are almost omnipresent. The Web has become a platform not only for information delivery, but also for eCommerce systems, social networks, mobile services, and distributed learning environments. Engineering Web applications involves many intrinsic challenges due...... to their distributed nature, content orientation, and the requirement to make them available to a wide spectrum of users who are unknown in advance. The authors discuss these challenges in the context of well-established engineering processes, covering the whole product lifecycle from requirements engineering through...... design and implementation to deployment and maintenance. They stress the importance of models in Web application development, and they compare well-known Web-specific development processes like WebML, WSDM and OOHDM to traditional software development approaches like the waterfall model and the spiral...

Starting up stress thallium cardiac imaging services.

Science.gov (United States)

Owens, R G; Neubecker, J S

1992-01-01

This paper presents an evaluation of alternative methods for a hospital to establish stress thallium cardiac imaging services at a group of physicians' office. Volume-cost-profit analysis, break-even analysis and capital budgeting techniques were used to determine the most feasible method from a financial perspective without sacrificing quality of services. The main focus of this evaluation centers upon three alternative methods of procuring an imaging camera: (1) purchasing a new camera, (2) purchasing used equipment, or (3) leasing a new camera. Budgeted income statements were constructed using relevant revenue and cost information for each alternative. The payback period, net present value and the internal rate of return for each method of procuring a camera was computed. In addition, the break-even point was also determined for each alternative. After the analysis was completed, it was concluded that the method of choice, without sacrificing quality of service delivery, was that of purchasing a used camera.

Measured residual stresses in overlay pipe weldments removed from service

International Nuclear Information System (INIS)

Shack, W.J.

1985-02-01

Surface and throughwall residual stresses were measured on an elbow-to-pipe weldment that had been removed from the Hatch-2 reactor about a year after the application of a weld overlay. The results were compared with experimental measurements on three mock-up weldments and with finite-element calculations. The comparison shows that there are significant differences in the form and magnitude of the residual stress distributions. However, even after more than a year of service, the residual stresses over most of the inner surface of the actual plant weldment with an overlay were strongly compressive. 3 refs., 7 figs

An ocean of stress? The relationship between psychosocial workload and mental strain among engine officers in the Swedish merchant fleet.

Science.gov (United States)

Rydstedt, Leif W; Lundh, Monica

2010-01-01

The first purpose of this study was to compare the psychosocial working conditions and mental health of our sample of maritime engine officers with a sample of British shore-based professional engineers. The second purpose was to analyse the relationship between the psychosocial working conditions onboard and mental strain for the Swedish maritime engine officers. There were a total of 731 engine officers in the Swedish merchant fleet, almost all males with higher education. The British comparison sample consisted of 312 professional shore-based engineers. A questionnaire was distributed to the Swedish engine officers with a modified version of the JCQ for the DC-S model, the Role conflict and Ambiguity scale, and two items on family-work inter-role conflicts (WFI/FWI), as workload indicators. The General Health Questionnaire (GHQ12) and Perceived Stress Scale (PSS10) were used as strain indicators. There were no significant differences in perceived job stain or in WFI/FWI between the Swedish engine officers and the British professional engineers in perceived job strain. While the British shore-based engineers reported significantly higher role ambiguity the Swedish engine officers perceived a significantly higher degree of role conflict and higher perceived stress. Hierarchic linear regression analysis showed that the Role Stress was strongly related to perceived stress (R(2) = 0.319) as well as to mental health (R(2) = 0.222). When introduced in the second step the DC-S model was significantly related to the outcome measures, as was WFI/FWI when finally introduced. The main source of the high degree of perceived stress among the engine officers does not seem to be the job content but may rather be understood from an interactional perspective, where conflicting requirements are directed towards the individual officer. It can be assumed that the fast technological and organizational changes and the increased pressure for economic profitability that characterize the

After-sales service of engineering industrial assets a reference framework for warranty management

CERN Document Server

González-Prida Díaz, Vicente

2014-01-01

This book explores the practical implementation of an advanced after-sales management framework devoted to warranty management. The framework is intended for companies producing either standardized or customized products, and such a management tool will facilitate organizational improvement and support innovative decision making processes for technical assistance in after-sales services.  “After–sales Service of Engineering Industrial Assets” comprises a proposal for a warranty management framework, with an account of the different methods that can be used to improve decision making in the different stages of the after-sales service management process, and strategies for strengthening the structure and foundations of the framework. A review of the fundamental issues and current research topics in warranty management and after sales services is also provided, which is exemplified by a case study. This book is intended for postgraduates, researchers and engineers who are interested in aftersales manageme...

Engine Tune-Up Service. Unit 4: Secondary Circuit. Posttests. Automotive Mechanics Curriculum.

Science.gov (United States)

Morse, David T.

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 4, Secondary Circuit, available separately as CE 031 214. Focus of the posttests is testing and servicing the secondary ignition circuit. One multiple choice posttest is provided that covers the seven performance objectives contained in the unit. (No…

Structural Stress Analysis of an Engine Cylinder Head

Directory of Open Access Journals (Sweden)

R. Tichánek

2005-01-01

Full Text Available This paper deals with a structural stress analysis of the cylinder head assembly of the C/28 series engine. A detailed FE model was created for this purpose. The FE model consists of the main parts of the cylinder head assembly, and it includes a description of the thermal and mechanical loads and the contact interaction between their parts. The model considers the temperature dependency of the heat transfer coefficient on wall temperature in cooling passages. The paper presents a comparison of computed and measured temperature. The analysis was carried out using the FE program ABAQUS. 

40 CFR 1048.401 - What testing requirements apply to my engines that have gone into service?

Science.gov (United States)

2010-07-01

... engines that have gone into service? 1048.401 Section 1048.401 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES Testing In-use Engines § 1048.401 What testing requirements apply to my engines that have...

Design and Lab Experiment of a Stress Detection Service based on Mouse Movements

OpenAIRE

Kowatsch, Tobias; Wahle, Fabian; Filler, Andreas

2017-01-01

Workplace stress can negatively affect the health condition of employees and with it, the performance of organizations. Although there exist approaches to measure work-related stress, two major limitations are the low resolution of stress data and its obtrusive measurement. The current work applies design science research with the goal to design, implement and evaluate a Stress Detection Service (SDS) that senses the degree of work-related stress solely based on mouse movements of knowledge w...

Application of Value Engineering to Improve upon Customer Services Performance in Mazandaran Water and Sewage Company

Directory of Open Access Journals (Sweden)

Reza Tavakkoli-Mogahddam

2007-06-01

Full Text Available Over the course of producing and marketing goods and services, it appears that industry faces a new challenge in which information and science form the basis for any organizational movement. In this regard, the competitive preference of the organization concentrates on customer and value creation in the organization. Value engineering recognizes product/service functions and produces those with the maximum value at the lowest cost without the loss of production or service quality and safety. In this paper, using value engineering based on the international job plan of the SAVE (Society of American Value Engineering, various alternatives are proposed to improve upon the performance of Customer Services of Water and Sewage Co. The results indicate possible savings of about 714 Million Rials for the water authority in the city of Sari and 4860 Million Rials across Mazandaran Province.

An integrative fuzzy Kansei engineering and Kano model for logistics services

Science.gov (United States)

Hartono, M.; Chuan, T. K.; Prayogo, D. N.; Santoso, A.

2017-11-01

Nowadays, customer emotional needs (known as Kansei) in product and especially in services become a major concern. One of the emerging services is the logistics services. In obtaining a global competitive advantage, logistics services should understand and satisfy their customer affective impressions (Kansei). How to capture, model and analyze the customer emotions has been well structured by Kansei Engineering, equipped with Kano model to strengthen its methodology. However, its methodology lacks of the dynamics of customer perception. More specifically, there is a criticism of perceived scores on user preferences, in both perceived service quality and Kansei response, whether they represent an exact numerical value. Thus, this paper is proposed to discuss an approach of fuzzy Kansei in logistics service experiences. A case study in IT-based logistics services involving 100 subjects has been conducted. Its findings including the service gaps accompanied with prioritized improvement initiatives are discussed.

Integrated approach for stress analysis of high performance diesel engine cylinder head

Science.gov (United States)

Chainov, N. D.; Myagkov, L. L.; Malastowski, N. S.; Blinov, A. S.

2018-03-01

Growing thermal and mechanical loads due to development of engines with high level of a mean effective pressure determine requirements to cylinder head durability. In this paper, computational schemes for thermal and mechanical stress analysis of a high performance diesel engine cylinder head were described. The most important aspects in this approach are the account of temperature fields of conjugated details (valves and saddles), heat transfer modeling in a cooling jacket of a cylinder head and topology optimization of the detail force scheme. Simulation results are shown and analyzed.

Role stress in after-sales service management: a longitudinal assessment of its antecedents and consequences

NARCIS (Netherlands)

Wetzels, M.G.M.; Ruyter, de J.C.; Lemmink, J.G.A.M.

1999-01-01

The implementation of a superior service strategy strongly depends on the attitude and behavior of customer contact personnel in service organizations. However, conflicting demands of organizational constraints, service managers, service teams, and customers frequently lead to role stress of service

Development of stress corrosion cracking resistant welds of 321 stainless steel by simple surface engineering

Science.gov (United States)

Mankari, Kamal; Acharyya, Swati Ghosh

2017-12-01

We hereby report a simple surface engineering technique to make AISI grade 321 stainless steel (SS) welds resistant to stress corrosion cracking (SCC) in chloride environment. Heat exchanger tubes of AISI 321 SS, welded either by (a) laser beam welding (LBW) or by (b) metal inert gas welding (MIG) were used for the study. The welds had high magnitude of tensile residual stresses and had undergone SCC in chloride environment while in service. The welds were characterized using field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD). Subsequently, the welded surfaces were subjected to buffing operation followed by determination of residual stress distribution and surface roughness by XRD and surface profilometer measurements respectively. The susceptibility of the welds to SCC was tested in buffed and un-buffed condition as per ASTM G-36 in boiling MgCl2 for 5 h and 10 h, followed by microstructural characterization by using optical microscope and FESEM. The results showed that the buffed surfaces (both welds and base material) were resistant to SCC even after 10 h of exposure to boiling MgCl2 whereas the un-buffed surfaces underwent severe SCC for the same exposure time. Buffing imparted high magnitude of compressive stresses on the surface of stainless steel together with reduction in its surface roughness and reduction in plastic strain on the surface which made the welded surface, resistant to chloride assisted SCC. Buffing being a very simple, portable and economic technique can be easily adapted by the designers as the last step of component fabrication to make 321 stainless steel welds resistant to chloride assisted SCC.

Service dog training program for treatment of posttraumatic stress in service members.

Science.gov (United States)

Yount, Rick A; Olmert, Meg D; Lee, Mary R

2012-01-01

In July 2008, social worker and certified service dog trainer Rick Yount created the first Warrior dog-training program designed to be a safe, effective, nonpharmaceutical intervention to treat the symptoms of posttraumatic stress disorder (PTSD) and traumatic brain injury in Veterans and service members undergoing treatment at a large Veterans Administration residential treatment facility. In 2009, Yount was asked to establish the program at a prominent Department of Defense medical center. In October 2010, Yount was invited to create a service dog training program to support the research and treatment mission at the new National Intrepid Center of Excellence (NICoE), in Bethesda, Maryland. This program, now being offered through the nonprofit foundation Warrior Canine Connection, continues to produce anecdotal evidence that training service dogs reduces the PTSD symptoms of Warrior-trainers and that the presence of the dogs enhances the sense of wellness in the NICoE staff and the families of our Wounded Warriors. Under the research leadership of the NICoE, the Warrior Canine Connection research team plans to systematically investigate the physiological, psychological, and behavioral benefits of this program.

Burnout, Stress and Direct Student Services among School Counselors

Science.gov (United States)

Mullen, Patrick R.; Gutierrez, Daniel

2016-01-01

The burnout and stress experienced by school counselors is likely to have a negative influence on the services they provide to students, but there is little research exploring the relationship among these variables. Therefore, we report findings from our study that examined the relationship between practicing school counselors' (N = 926) reported…

Studies on Experimental Ontology and Knowledge Service Development in Bio-Environmental Engineering

Science.gov (United States)

Zhang, Yunliang

2018-01-01

The existing domain-related ontology and information service patterns are analyzed, and the main problems faced by the experimental scheme knowledge service were clarified. The ontology framework model for knowledge service of Bio-environmental Engineering was proposed from the aspects of experimental materials, experimental conditions and experimental instruments, and this ontology will be combined with existing knowledge organization systems to organize scientific and technological literatures, data and experimental schemes. With the similarity and priority calculation, it can improve the related domain research.

Effect of fin attachment on thermal stress reduction of exhaust manifold of an off road diesel engine

Institute of Scientific and Technical Information of China (English)

Ali; Akbar; Partoaa; Morteza; Abdolzadeh; Masoud; Rezaeizadeh

2017-01-01

The effect of fin attachment on the thermal stress reduction of exhaust manifold of an off road diesel engine(Komatsu HD325-6) was investigated.For doing this,coupled thermo-fluid-solid analysis of exhaust manifold of the off road diesel engine was carried out.The thermal analysis,including thermal flow,thermal stress,and the thermal deformation of the manifold was investigated.The flow inside the manifold was simulated and then its properties including velocity,pressure,and temperature were obtained.The flow properties were transferred to the solid model and then the thermal stresses and the thermal deformations of the manifold under different operating conditions were calculated.Finally,based on the predicted thermal stresses and thermal deformations of the manifold body shell,two fin types as well as body shell thickness increase were applied in the critical induced thermal stress area of the manifold to reduce the thermal stress and thermal deformation.The results of the above modifications show that the combined modifications,i.e.the thickness increase and the fin attachment,decrease the thermal stresses by up to 28% and the contribution of the fin attachment in this reduction is much higher compared to the shell thickness increase.

Suicidal Ideation, Depression, Anxiety, Stress, And Life Satisfaction Of Medical, Engineering, And Social Sciences Students.

Science.gov (United States)

Naseem, Sabahat; Munaf, Seema

2017-01-01

Pursuing higher education is not an easy task as it requires hard work, dedication, and motivation. Although there are many rewards involved in growing up academically, nevertheless, it contains a few hazards too. For instance, suicidal ideation is associated with presence of depression, anxiety, and stress with low level of satisfaction with life in students finding difficulty in handling educational demands of higher education. Therefore, the present study focused on the query that whether there is any difference or not among medical, engineering, and social sciences students of city of Karachi, Pakistan in the level of suicidal ideation, depression, anxiety, stress, and life satisfaction. Using comparative group design, total 300 students (150 males and 150 females) with age range of 19-26 were selected from faculties of medical, engineering, and social sciences of different universities of Karachi, Pakistan, through purposive sampling. Respondent Profile Form, The Suicide Behaviours Questionnaire-Revised, Depression Anxiety Stress Scale-21, and Satisfaction with Life Scale were administered to assess suicidal ideation; depression, anxiety, stress; and life satisfaction, respectively, of the students. Scores were analysed through ANOVA and Post Hoc (Tukey's HSD) test using SPSS. Social sciences and engineering students were significantly higher on depression, anxiety, and stress than medical students [F (2, 297) =8.701, p=.000] whereas insignificant differences in the level of suicidal ideation [F (2, 297) =1.914, p=.149] and life satisfaction [F (2, 297) = .726, p = .485] among these students were found. With the help of these findings, it would be easier to counsel students of different disciplines in time on the lines of suggested preventive measures.

Engine Tune-up Service. Unit 6: Emission Control Systems. Posttests. Automotive Mechanics Curriculum.

Science.gov (United States)

Morse, David T.; May, Theodore R.

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 6, Emission Control Systems, available separately as CE 031 220. Focus of the posttests is inspecting, testing, and servicing emission control systems. One multiple choice posttest is provided that covers the seven performance objectives contained in…

How the Kano model contributes to Kansei engineering in services.

Science.gov (United States)

Hartono, Markus; Chuan, Tan Kay

2011-11-01

Recent studies show that products and services hold great appeal if they are attractively designed to elicit emotional feelings from customers. Kansei engineering (KE) has good potential to provide a competitive advantage to those able to read and translate customer affect and emotion in actual product and services. This study introduces an integrative framework of the Kano model and KE, applied to services. The Kano model was used and inserted into KE to exhibit the relationship between service attribute performance and customer emotional response. Essentially, the Kano model categorises service attribute quality into three major groups (must-be [M], one-dimensional [O] and attractive [A]). The findings of a case study that involved 100 tourists who stayed in luxury 4- and 5-star hotels are presented. As a practical matter, this research provides insight on which service attributes deserve more attention with regard to their significant impact on customer emotional needs. STATEMENT OF RELEVANCE: Apart from cognitive evaluation, emotions and hedonism play a big role in service encounters. Through a focus on delighting qualities of service attributes, this research enables service providers and managers to establish the extent to which they prioritise their improvement efforts and to always satisfy their customer emotions beyond expectation.

[Occupational stress and early health effects in migrant workers in an electronics manufacturing service enterprise].

Science.gov (United States)

Liu, X M; Li, S; Zhang, Q Y; Wang, C; Ji, Y Q; Wang, J; Shi, J

2016-10-20

Objective: To investigate occupational stress in migrant workers in an electronics manufacturing service enterprise and the association between occupational stress and early health effects, such as job burnout, depressive tendency, and insomnia. Methods: In August 2015, stratified random cluster sampling was used to select 1 097 migrant workers in an electronics manufacturing service enterprise. The Job Demand-Autonomy Questionnaire and effort-reward imbalance questionnaire were used to investigate occupational stress with the types of high workload and effort-reward imbalance, and Burnout Inventory, depression scale, and self-management sleep questionnaire were used to investigate the early health effects of occupational stress. Results: In these migrant workers, the detection rates of occupational stress with the types of high workload and effort-reward imbalance were 69.8%(766/1 097) and 11.9%(131/1 097). The multivariate logistic regression analysis showed that the workers who had occupational stress with the types of high workload and effort-reward imbalance had significantly higher risks of job burnout and depressive tendencies than those who did not have these two types of occupational stress ( P workers who had occupational stress with the type of effort-reward imbalance had a significantly higher ability to predict the risks of job burnout and depressive tendencies than those who had occupational stress with the type of high workload ( P health effects, such as job burnout, depressive tendency, and insomnia, in the migrant workers in this electronics manufacturing service enterprise. The workers who have occupational stress with the type of effort-reward imbalance have higher risks of job burnout and depressive tendencies than those who have occupational stress with the type of high workload.

Sample environment for neutron scattering measurements of internal stresses in engineering materials in the temperature range of 6 K to 300 K.

Science.gov (United States)

Kirichek, O; Timms, J D; Kelleher, J F; Down, R B E; Offer, C D; Kabra, S; Zhang, S Y

2017-02-01

Internal stresses in materials have a considerable effect on material properties including strength, fracture toughness, and fatigue resistance. The ENGIN-X beamline is an engineering science facility at ISIS optimized for the measurement of strain and stress using the atomic lattice planes as a strain gauge. Nowadays, the rapidly rising interest in the mechanical properties of engineering materials at low temperatures has been stimulated by the dynamic development of the cryogenic industry and the advanced applications of the superconductor technology. Here we present the design and discuss the test results of a new cryogenic sample environment system for neutron scattering measurements of internal stresses in engineering materials under a load of up to 100 kN and in the temperature range of 6 K to 300 K. Complete cooling of the system starting from the room temperature down to the base temperature takes around 90 min. Understanding of internal stresses in engineering materials at cryogenic temperatures is vital for the modelling and designing of cutting-edge superconducting magnets and other superconductor based applications.

Engine Tune-Up Service. Unit 4: Secondary Circuit. Student Guide. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This student guide is for Unit 4, Secondary Circuit, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with how to test and service the secondary ignition circuit. A companion review exercise book and posttests are available separately as CE 031 215-216. An introduction tells how this unit fits into the total…

Engine Tune-up Service. Unit 2: Charging System. Student Guide. Automotive Mechanics Curriculum.

Science.gov (United States)

Richardson, Roger L.; Bacon, E. Miles

This student guide is for Unit 2, Charging System, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with how to test the charging system. A companion review exercise book and posttests are available separately as CE 031 209-210. An introduction tells how this unit fits into the total tune-up service, defines…

Strain measurements in a rotary engine housing

Science.gov (United States)

Lee, C. M.; Bond, T. H.; Addy, H. E.; Chun, K. S.; Lu, C. Y.

1989-01-01

The development of structural design tools for Rotary Combustion Engines (RCE) using Finite Element Modeling (FEM) requires knowledge about the response of engine materials to various service conditions. This paper describes experimental work that studied housing deformation as a result of thermal, pressure and mechanical loads. The measurement of thermal loads, clamping pressure, and deformation was accomplished by use of high-temperature strain gauges, thermocouples, and a high speed data acquisition system. FEM models for heat transfer stress analysis of the rotor housing will be verified and refined based on these experimental results.

Determination of service stresses in pretensioned beams, final report, December 2009.

Science.gov (United States)

2009-12-01

This report presents research on the evaluation of service flexural stresses and cracking moment in prestressed concrete members and on the minimum reinforcement requirements that are currently controlled by the flexural cracking moment. In prestress...

[Stress as an occupational risk factor among policemen of road patrol service].

Science.gov (United States)

Fedotova, I V; Chernikova, E F

The hygienic evaluation of occupational factors which characterized working conditions of traffic policemen of road patrol service was performed. The authors found that along with high neuro-emotional occupational stress in traffic policemen, they exposed to unfavorable microclimate, higher level of noise, vibration and their work was classified as heavy. Also, traffic policemen presented subjective complaints about negative impact of polluted air of motorways on their health status. Prevalence of chronic diseases was analyzed in group of 431 traffic policemen. The authors revealed a leading role of the following diseases: musculoskeletal diseases, diseases of connective tissue, digestive diseases, diseases of the nerve system, circulation system; their portion in the morbidity structure was 86.0%. The association of these diseases with occupation was confirmed by the increasing of their incidence with increasing of length of duration of service. Calculation of indices of relative occupational risk showed (that especially important) the increase of the length of service led to the increase in the risk ofpathologies, in which stress played a significant role. In examined group, the authors revealed such diseases as hypertension, autonomous-vascular dystonia, gastric and duodenal ulcer. Risk of the development of these diseases in some age/length of service groups is classified as high and very high. Obtained results provide the evidence that measures aimed to the decrease of the exposure to occupational factors will promote prevention of stress-stipulated diseases among traffic policemen.

[Oxidative stress in station service workers].

Science.gov (United States)

Basso, A; Elia, G; Petrozzi, M T; Zefferino, R

2004-01-01

The aim of this study is to identify an oxidative stress in service station workers. Previous studies verified an increased incidence of leukemia and myeloma, however other authors haven't verified it. There are reports of nasal, pharyngeal, laryngeal, and lung cancer in service station workers. Our study wants to evaluate the oxidative balance in the fuel workers. We studied 44 subjects with gasoline exposure and 29 control subjects. We determined the blood concentrations of Glutathione reduced and oxidized, Protein sulfhydrylic (PSH) Vitamine E, Vitamine C, Malondialdehyde, Protein oxidized (OX-PROT) and beta carotene. The t test was performed to analyze the differences between the means, the Chi square was used to evaluate the statistical significance of associations between variable categorical (redox index). The Anova test excluded the confusing effect of age, smoke and alcohol habit. The mean age of the workers was 36.6 years, instead the control group was 38. In the workers Glutathione reduced, Vit. E and Beta carotene were lower than in the control subjects, this difference was statistically significant (p < 0.01). The Malondialdehyde concentration was higher in the workers higher than in the control group, but this difference wasn't statistically significant. Our data demonstrated Glutathione, Vit. E, and Beta carotene are useful to verify a reduction of the antioxidant activity. The only marker of the presence of oxidative injury that correlated to work exposure was the malondialdehyde. The redox index was surest marker. The limit of our study is the number of control group, it was little and lower than workers. Conclusively we believe it's useful to continue our studies and, if our results are going to be confirmed, we retain that stress oxidative determination would be verified in occupational medicine using these markers, especially to study exposure of the fuel workers who were investigated less and, in our opinion, would receive more attention.

EIIS: An Educational Information Intelligent Search Engine Supported by Semantic Services

Science.gov (United States)

Huang, Chang-Qin; Duan, Ru-Lin; Tang, Yong; Zhu, Zhi-Ting; Yan, Yong-Jian; Guo, Yu-Qing

2011-01-01

The semantic web brings a new opportunity for efficient information organization and search. To meet the special requirements of the educational field, this paper proposes an intelligent search engine enabled by educational semantic support service, where three kinds of searches are integrated into Educational Information Intelligent Search (EIIS)…

Engine Tune-Up Service. Unit 3: Primary Circuit. Student Guide. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This student guide is for Unit 3, Primary Circuit, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with how to test the primary ignition circuit. A companion review exercise book and posttests are available separately as CE 031 212-213. An introduction tells how this unit fits into the total tune-up service,…

Are Posttraumatic Stress Symptoms Related to Mental Health Service Use?

DEFF Research Database (Denmark)

Madsen, Trine; Andersen, Søren Bo; Karstoft, Karen-Inge

2016-01-01

BACKGROUND: Investigating the use of mental health services by combat veterans can help illuminate utilization and unmet needs of this population. The aims of this study were to estimate the use of mental health services and to examine how such use is associated with self-reported symptoms...... of posttraumatic stress disorder (PTSD) in soldiers before and after deployment to Afghanistan. METHODS: Prospectively, 703 Danish soldiers who deployed from January 2009 to August 2009 were followed up with 6 assessments from predeployment to 2.5 years postdeployment in 2012. At assessments, the soldiers...

Establishing the Overall Service Quality of Engineering Education: Fuzzy Logic Approach

Science.gov (United States)

Shekhar, N. Chandra; Venkatasubbaiah, K.; Kandukuria, N. R.

2012-01-01

Measuring overall service quality (OSQ) is gaining prominence in higher education due to the increased competition among engineering education institutions (EEIs) and growing awareness about value for money among the public. Determination of OSQ on certain institutional aspects is done by various agencies throughout the world. Each system uses a…

STRESS TESTS FOR VIDEOSTREAMING SERVICES BASED ON RTSP PROTOCOL

Directory of Open Access Journals (Sweden)

Gabriel Elías Chanchí Golondrino

2015-11-01

Full Text Available Video-streaming is a technology with major implications these days in such diverse contexts as education, health and the business sector; all of this regarding the ease it provides for remote access to live or recorded media content, allowing communication regardless of geographic location. One standard protocol that enables implementation of this technology is real time streaming protocol, or RTSP. However, since most application servers and Internet services are supported on HTTP requests, very little research has been done on generating tools for carrying out stress tests on streaming servers. This paper presents a stress measuring tool called Hermes, developed in Python, which allows calculation of response times for establishing RTSP connections to streaming servers, as well as obtaining RAM memory consumption and CPU usage rate data from these servers. Hermes was deployed in a video-streaming environment where stress testing was carried out on the LIVE555 server, using calls in the background to VLC and OpenRTSP open source clients. 

Factors that Influence First-Career Choice of Undergraduate Engineers in Software Services Companies: A South Indian Experience

Science.gov (United States)

Gokuladas, V. K.

2010-01-01

Purpose: The purpose of this paper is to identify how undergraduate engineering students differ in their perception about software services companies in India based on variables like gender, locations of the college and branches of engineering. Design/methodology/approach: Data obtained from 560 undergraduate engineering students who had the…

Engine Tune-up Service. Unit 4: Secondary Circuit. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 4, Secondary Circuit, available separately as CE 031 214. Focus of the exercises and pretests is testing and servicing the secondary ignition circuit. Pretests and performance checklists are provided for each of the seven…

Engine Tune-up Service. Unit 6: Emission Control Systems. Student Guide. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This student guide is for Unit 6, Emission Control Systems, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with inspecting, testing, and servicing an emission control system. A companion review exercise book and posttests are available separately as CE 031 221-222. An introduction tells how this unit fits…

Engine Tune-Up Service. Unit 5: Fuel and Carburetion Systems. Posttests. Automotive Mechanics Curriculum.

Science.gov (United States)

Morse, David T.

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 5, Fuel and Carburetion Systems; available separately as CE 031 217. Focus of the posttests is the inspecting and servicing of the fuel and carburetion systems. One multiple choice posttest is provided that covers the 10 performance objectives…

Plant-specific evaluations of Transamerica Delaval diesel engines for nuclear service

International Nuclear Information System (INIS)

Dingee, D.A.; Laity, W.W.; Nesbitt, J.F.

1985-03-01

This paper discusses the approach taken to evlauate the readiness of Transamerica Delaval, Inc. (TDI) diesel generators for nuclear service at five power plants: Catawba, Comanche Peak, Grand Gulf, San Onofre, and Shoreham. TDI engines in these and other nuclear power plants have been the subject of a coordinated effort by 13 nuclear utilities to address reliability and quality issues. The utilities formed the TDI Diesel Generator Owners' Group and prepared a comprehensive plan for requalifying the engines as emergency power sources. Prior to full implementation of the plan by the Owners' Group and final review of the findings by the US Nuclear Regulatory Commission, several member plants became candidates for operating licenses. The TDI engines in those plants, including the five listed above, were evaluated on a case-by-case basis, taking into consideration the factors discussed in this paper. 2 refs

Women's stress in compulsory army service in Israel: A gendered perspective.

Science.gov (United States)

Huss, Ephrat; Cwikel, Julie

2015-01-01

A growing number of women are serving in the military in a variety of roles, yet information on their experience of stressors not associated with either combat or sexual harassment is not commonly reported. To present phenomenological data on stressors experienced in military service, together with the use of coping strategies as a way to focus on women's mental needs following deployment from service. Twenty women who had recently completed their compulsory army service in Israel drew a picture expressing stressors they experienced in the army. They analyzed their own pictures on three levels: the content, context, and the composition as expressing stress and the resources they used in coping with stress. Six themes were raised: proximity to war situations, coping with accidents in training soldiers under their command, a conflict between political values and military orders, witnessing the injury of another female soldier, responsibility for accidental injury of a civilian, and distress over the army placement. Coping resources were relational, primarily family and friend support, rather than from the army framework. This reliance on relational sources of support was both a resource and a source of vulnerability and is viewed as distinct from men's style of coping.

Technical engineering services in support of the Nike-Tomahawk sounding rocket vehicle system

Science.gov (United States)

1972-01-01

Task assignments in support of the Nike-Tomahawk vehicles, which were completed from May, 1970 through November 1972 are reported. The services reported include: analytical, design and drafting, fabrication and modification, and field engineering.

Tackling Work Related Stress in a National Health Service Trust

Science.gov (United States)

Vick, Donna; Whyatt, Hilary

2004-01-01

The challenge of tackling the problem of coping with work related stress in a National Health Service (NHS) Trust was undertaken. Ideas were developed within the context of two different action learning sets and led to actions resulting in a large therapy Taster Session event and the establishment of a centre offering alternative therapies and…

Exploration of Relationship Between Stress and Spirituality Characteristics of Male and Female Engineering Students: A Comprehensive Study.

Science.gov (United States)

Yadav, Radha; Khanna, Ashu; Singh, Dharmendra

2017-04-01

This observational paper endeavours to recognize the connection between spirituality and stress. Four types of indicators are utilized for the estimation of anxiety, vis-à-vis, behavioural indicators, emotional indicators, sleep indicators and personal habits. As per pre-documented theory, if spirituality is high within an individual, then his/her stress will be low and vice versa. In college, the stress of education and scoring grades influences the understudy. Information is gathered through a survey in the light of spirituality index and stress index. Findings prove that the indicators of the stress are more visible in female students. Apart from this, there has been not much substantial study in the area of stress and spirituality among college students. Hence, the main purpose of this study was to discuss the various types of stress and effects of spirituality on the engineering students belonging to the age group of 21-26 years, prioritizing the indicators of stress as per the gender of students. The entire study constituted of a sample group of 200 participants, and for the entire process, correlation analysis was used to find the relative relation between spirituality and stress among girls and boys. T test is used for rejection of the null hypothesis. The article focuses on the current issues that students have been facing in the twenty-first century. Result of the study showed that there is a negative relationship between the spirituality and stress of male and female students. Moreover, the article provides unique contribution to the literature and also offers suggestions for generating new research ideas that can be used to ameliorate the problems that plague individuals and organizations in today's world. This is the first article which covers the spirituality and stress of the engineering student and discusses the impact on young adults, as well as highlighting certain ways to overcome stress and enhance spirituality.

Distance Support In-Service Engineering for the High Energy Laser

Science.gov (United States)

2015-03-01

FEL only) o Isoplanatic angle (if available) o Fried coherence length o Object distance o Dwell time o Laser spot size While many of the items...system and the HEL system. Acquisition Sensor Laser Subsystem Beam Shaping Sensor Suile . Range Finder -. Coarse Tracker . Fine Tracker Optical...distribution is unlimited DISTANCE SUPPORT IN-SERVICE ENGINEERING FOR THE HIGH ENERGY LASER by Team Raising HEL from a Distance Cohort 311-133O March

Deformation stresses and mechanical behaviour of engineered barriers in the repository environment

International Nuclear Information System (INIS)

Ipatti, A.; Majamaeki, O.

1991-12-01

The report surveys functioning of the engineered barriers in the Loviisa repository under deformation stresses of the solidification product and the concrete filling material. The survey is based on the latest estimates of the waste amounts and the corresponding repository plans, and on solidification product compositions and properties. The IVOFEM and NASTRAN software was used in the structural analyses. The materials were supposed to be homogeneous and linearly elastic and dislocations small. Accordingly, the design loads were chosen conservatively so that the impacts of deformation stresses are sufficiently overestimated. A reinforced concrete container lined with cellular plastic remains a watertight structure, meeting the requirements set in view of expansion of a solidification product. In view of the stresses, the decisive time is the intermediate storage stage. The greatest stresses are found in junctions between the container wall and the bottom and cover. The concrete filling between the waste packages cannot resist the drying shrinkage and wetting expansion stresses without cracking. Concrete walls of the repository can withstand the stress caused by wetting expansion of the waste packages only when strongly reinforced. However, the forces against the walls are so big that if cracks in the concrete walls are desired to be restricted, due to reinforcement steel corrosion or wall tightness, the present type of filling material between the waste packages is not necessarily technically the best alternative

Distribution of Side Abutment Stress in Roadway Subjected to Dynamic Pressure and Its Engineering Application

Directory of Open Access Journals (Sweden)

Yao Qiangling

2015-01-01

Full Text Available The borehole stress-meter was employed in this study to investigate the distribution of the side abutment stress in roadway subjected to dynamic pressure. The results demonstrate that the side abutment stress of the mining roadway reaches a peak value when the distance to the gob is 8 m and the distribution curve of the side abutment stress can be divided into three zones: stress rising zone, stress stabilizing zone, and stress decreasing zone. Further numerical investigation was carried out to study the effect of the coal mass strength, coal seam depth, immediate roof strength, and thickness on the distribution of the side abutment stress. Based on the research results, we determined the reasonable position of the mining roadway and the optimal width of the barrier pillar. The engineering application demonstrates that the retention of the barrier pillar with a width of 5 m along the gob as the haulage roadway for the next panel is feasible, which delivers favorable technological and economic benefits.

Engineering a plant community to deliver multiple ecosystem services.

Science.gov (United States)

Storkey, Jonathan; Döring, Thomas; Baddeley, John; Collins, Rosemary; Roderick, Stephen; Jones, Hannah; Watson, Christine

2015-06-01

The sustainable delivery of multiple ecosystem services requires the management of functionally diverse biological communities. In an agricultural context, an emphasis on food production has often led to a loss of biodiversity to the detriment of other ecosystem services such as the maintenance of soil health and pest regulation. In scenarios where multiple species can be grown together, it may be possible to better balance environmental and agronomic services through the targeted selection of companion species. We used the case study of legume-based cover crops to engineer a plant community that delivered the optimal balance of six ecosystem services: early productivity, regrowth following mowing, weed suppression, support of invertebrates, soil fertility building (measured as yield of following crop), and conservation of nutrients in the soil. An experimental species pool of 12 cultivated legume species was screened for a range of functional traits and ecosystem services at five sites across a geographical gradient in the United Kingdom. All possible species combinations were then analyzed, using a process-based model of plant competition, to identify the community that delivered the best balance of services at each site. In our system, low to intermediate levels of species richness (one to four species) that exploited functional contrasts in growth habit and phenology were identified as being optimal. The optimal solution was determined largely by the number of species and functional diversity represented by the starting species pool, emphasizing the importance of the initial selection of species for the screening experiments. The approach of using relationships between functional traits and ecosystem services to design multifunctional biological communities has the potential to inform the design of agricultural systems that better balance agronomic and environmental services and meet the current objective of European agricultural policy to maintain viable food

Perm State University HPC-hardware and software services: capabilities for aircraft engine aeroacoustics problems solving

Science.gov (United States)

Demenev, A. G.

2018-02-01

The present work is devoted to analyze high-performance computing (HPC) infrastructure capabilities for aircraft engine aeroacoustics problems solving at Perm State University. We explore here the ability to develop new computational aeroacoustics methods/solvers for computer-aided engineering (CAE) systems to handle complicated industrial problems of engine noise prediction. Leading aircraft engine engineering company, including “UEC-Aviadvigatel” JSC (our industrial partners in Perm, Russia), require that methods/solvers to optimize geometry of aircraft engine for fan noise reduction. We analysed Perm State University HPC-hardware resources and software services to use efficiently. The performed results demonstrate that Perm State University HPC-infrastructure are mature enough to face out industrial-like problems of development CAE-system with HPC-method and CFD-solvers.

Direct, CMOS In-Line Process Flow Compatible, Sub 100 °C Cu-Cu Thermocompression Bonding Using Stress Engineering

Science.gov (United States)

Panigrahi, Asisa Kumar; Ghosh, Tamal; Kumar, C. Hemanth; Singh, Shiv Govind; Vanjari, Siva Rama Krishna

2018-03-01

Diffusion of atoms across the boundary between two bonding layers is the key for achieving excellent thermocompression Wafer on Wafer bonding. In this paper, we demonstrate a novel mechanism to increase the diffusion across the bonding interface and also shows the CMOS in-line process flow compatible Sub 100 °C Cu-Cu bonding which is devoid of Cu surface treatment prior to bonding. The stress in sputtered Cu thin films was engineered by adjusting the Argon in-let pressure in such a way that one film had a compressive stress while the other film had tensile stress. Due to this stress gradient, a nominal pressure (2 kN) and temperature (75 °C) was enough to achieve a good quality thermocompression bonding having a bond strength of 149 MPa and very low specific contact resistance of 1.5 × 10-8 Ω-cm2. These excellent mechanical and electrical properties are resultant of a high quality Cu-Cu bonding having grain growth between the Cu films across the boundary and extended throughout the bonded region as revealed by Cross-sectional Transmission Electron Microscopy. In addition, reliability assessment of Cu-Cu bonding with stress engineering was demonstrated using multiple current stressing and temperature cycling test, suggests excellent reliable bonding without electrical performance degradation.

Direct, CMOS In-Line Process Flow Compatible, Sub 100 °C Cu-Cu Thermocompression Bonding Using Stress Engineering

Science.gov (United States)

Panigrahi, Asisa Kumar; Ghosh, Tamal; Kumar, C. Hemanth; Singh, Shiv Govind; Vanjari, Siva Rama Krishna

2018-05-01

Diffusion of atoms across the boundary between two bonding layers is the key for achieving excellent thermocompression Wafer on Wafer bonding. In this paper, we demonstrate a novel mechanism to increase the diffusion across the bonding interface and also shows the CMOS in-line process flow compatible Sub 100 °C Cu-Cu bonding which is devoid of Cu surface treatment prior to bonding. The stress in sputtered Cu thin films was engineered by adjusting the Argon in-let pressure in such a way that one film had a compressive stress while the other film had tensile stress. Due to this stress gradient, a nominal pressure (2 kN) and temperature (75 °C) was enough to achieve a good quality thermocompression bonding having a bond strength of 149 MPa and very low specific contact resistance of 1.5 × 10-8 Ω-cm2. These excellent mechanical and electrical properties are resultant of a high quality Cu-Cu bonding having grain growth between the Cu films across the boundary and extended throughout the bonded region as revealed by Cross-sectional Transmission Electron Microscopy. In addition, reliability assessment of Cu-Cu bonding with stress engineering was demonstrated using multiple current stressing and temperature cycling test, suggests excellent reliable bonding without electrical performance degradation.

An Observational Study of Service Dogs for Veterans With Posttraumatic Stress Disorder.

Science.gov (United States)

Yarborough, Bobbi Jo H; Owen-Smith, Ashli A; Stumbo, Scott P; Yarborough, Micah T; Perrin, Nancy A; Green, Carla A

2017-07-01

This study examined needs related to posttraumatic stress disorder (PTSD), assistance by service dogs, and feasibility of data collection among veterans receiving service dogs. Questionnaires assessed PTSD-related needs and services performed or expected to be performed by service dogs among 78 veterans who had or were on a wait list for a service dog (average age, 42; women, 31%). Analyses compared pre-post characteristics among 22 veterans who received a service dog as part of the study (91% follow-up; average follow-up=3.37±2.57 months). Veterans reported that the most important services performed were licking or nudging veterans to help them "stay present," preventing panic, and putting space between veterans and strangers. High follow-up rates and improvements in outcomes with moderate to large effect sizes among recipients of study-provided dogs suggest further study is warranted. Service dogs may be feasible supports for veterans with PTSD; randomized clinical trials are needed to assess effectiveness.

Stress Voiding in IC Interconnects - Rules of Evidence for Failure Analysts

Energy Technology Data Exchange (ETDEWEB)

FILTER, WILLIAM F.

1999-09-17

Mention the words ''stress voiding'', and everyone from technology engineer to manager to customer is likely to cringe. This IC failure mechanism elicits fear because it is insidious, capricious, and difficult to identify and arrest. There are reasons to believe that a damascene-copper future might be void-free. Nevertheless, engineers who continue to produce ICs with Al-alloy interconnects, or who assess the reliability of legacy ICs with long service life, need up-to-date insights and techniques to deal with stress voiding problems. Stress voiding need not be fearful. Not always predictable, neither is it inevitable. On the contrary, stress voids are caused by specific, avoidable processing errors. Analytical work, though often painful, can identify these errors when stress voiding occurs, and vigilance in monitoring the improved process can keep it from recurring. In this article, they show that a methodical, forensics approach to failure analysis can solve suspected cases of stress voiding. This approach uses new techniques, and patiently applies familiar ones, to develop evidence meeting strict standards of proof.

Secondary Traumatic Stress and Burnout of North Korean Refugees Service Providers.

Science.gov (United States)

Kim, Yeunhee Joyce

2017-03-01

The current study investigated the burnout and secondary traumatic stress of service providers for North Korean (NK) refugees based on the conceptual framework of theJob Demands-Resources (JD-R) model of workplace burnout. A cross-sectional self-administered survey was conducted with a national sample consisting of all 63 organizations in direct services to North Korean refugees. Of the estimated total number of 230 service providers comprising of social workers, psychotherapists, job counselors and paraprofessional counselors, 179 completed the survey, a 77.8% return rate. While job resources such as personal commitment to work and organizational support indicated inverse relations to burnout, job demands such as workload, work environment and secondary traumatic stress (STS) showed a positive relationship to worker burnout. The STS were present in more than half of the respondents (51.3%), of which 20.7% of them indicating a severe level of STS. The STS proved to be the most significant risk to worker burnout as it showed strong relations to all three dimensions of burnout. Structural issues of chronic work overload and poor work environment need to be addressed to reduce staff burnout. STS is a serious occupational hazard in working with North Korean refugees.

Engine Tune-up Service. Unit 6: Emission Control Systems. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 6, Emission Control Systems, available separately as CE 031 220. Focus of the exercises and pretests is inspecting, testing, and servicing emission control systems. Pretests and performance checklists are provided for each of the…

Effect of heat stress on contractility of tissue-engineered artificial skeletal muscle.

Science.gov (United States)

Takagi, Shunya; Nakamura, Tomohiro; Fujisato, Toshia

2018-01-23

The effects of heat stress on tissue like skeletal muscle have been widely studied. However, the mechanism responsible for the effect of heat stress is still unclear. A useful experimental tissue model is necessary because muscle function in cell culture may differ from native muscle and measuring its contractility is difficult. We previously reported three-dimensional tissue-engineered artificial skeletal muscle (TEM) that can be easily set in a measurement apparatus for quantitative evaluation of contractility. We have now applied TEM to the investigation of heat stress. We analyzed contractility immediately after thermal exposure at 39 °C for 24 or 48 h to evaluate the acute effects and after thermal exposure followed by normal culture to evaluate the aftereffects. Peak twitch contractile force and time-to-peak twitch were used as contractile parameters. Heat stress increased the TCF in the early stage (1 week) after normal culture; the TCF decreased temporarily in the middle to late stages (2-3 weeks). These results suggest that heat stress may affect both myoblast fusion and myotube differentiation in the early stage of TEM culture, but not myotube maturation in the late stage. The TCF increase rate with thermal exposure was significantly higher than that without thermal exposure. Although detailed analysis at the molecular level is necessary for further investigation, our artificial skeletal muscle may be a promising tool for heat stress investigation.

76 FR 21851 - Defense Federal Acquisition Regulation Supplement; Construction and Architect-Engineer Services...

Science.gov (United States)

2011-04-19

...://regulations.gov , including any personal information provided. To confirm receipt of your comment, please... impacts, and equity). Executive Order 13563 emphasizes the importance of quantifying both costs and... terminated for default regardless of contract value. For Architect and Engineer (A&E) services, past...

Engine Tune-Up Service. Unit 5: Fuel and Carburetion Systems. Student Guide. Automotive Mechanics Curriculum.

Science.gov (United States)

Goodson, Ludy

This student guide is for Unit 5, Fuel and Carburetion Systems, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with inspecting and servicing the fuel and carburetion systems. A companion review exercise book and posttests are available separately as CE 031 218-219. An introduction tells how this unit fits…

Using Participatory and Service Design to Identify Emerging Needs and Perceptions of Library Services among Science and Engineering Researchers Based at a Satellite Campus

Science.gov (United States)

Johnson, Andrew; Kuglitsch, Rebecca; Bresnahan, Megan

2015-01-01

This study used participatory and service design methods to identify emerging research needs and existing perceptions of library services among science and engineering faculty, post-graduate, and graduate student researchers based at a satellite campus at the University of Colorado Boulder. These methods, and the results of the study, allowed us…

Perceived stress and life satisfaction: social network service use as a moderator.

Science.gov (United States)

Niu, Qikun; Liu, Yihao; Sheng, Zitong; He, Yue; Shao, Xiaolin

2011-01-01

Social Network Service (SNS) has become a buzzword in recent media coverage with the development of the second generation of Web-based communities. In China, SNS has played an increasingly important role in its users' daily lives, especially among students. With a sample of 471 college students, we tested the direct relationship between perceived stress and life satisfaction using a regression analysis. Moreover, we found SNS use could buffer the negative effect of perceived stress. This study has practical implications on Internet users' SNS use.

On residual stress prescriptions for fitness for service assessment of pipe girth welds

International Nuclear Information System (INIS)

Dong, Pingsha; Song, Shaopin; Zhang, Jinmiao; Kim, Myung H.

2014-01-01

This paper aims to provide a detailed assessment of some of the existing residual stress profiles stipulated in widely used fitness-for-service assessment codes and standards, such as BS 7910 Appendix Q and API 579 RP Annex E, by taking advantage of some comprehensive residual stress studies that have recently become available. After presenting a case study on which residual stress measurements are available for validating finite element based residual stress analysis procedure, residual stress profiles stipulated in BS 7910 for pipe girth welds are selected for detailed evaluation by comparing residual stress distribution characteristics shown in parametric finite element results. A shell theory based full-field residual stress profile estimation scheme is then presented to illustrate how an improved estimation of residual stress profiles can be achieved in light of some of the deficiencies in BS 7910 and API 579 identified in this study. - Highlights: • Critically assessed girth weld residual stress profiles in major FFS Codes and Standards. • Identified deficiencies in relating to pipe geometry, heat input, and axial distance from weld. • Presented a shell theory based scheme for prescribing full-field residual stress profiles

Engine Tune-Up Service. Unit 3: Primary Circuit. Posttests. Automotive Mechanics Curriculum.

Science.gov (United States)

Morse, David T.

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 3, Primary Circuit, available separately as CE 031 211. Focus of the posttests is setting the primary ignition circuit. One multiple choice posttest is provided, covering the eight performance objectives contained in the unit. (No answer key is…

Exploring resilience and mindfulness as preventative factors for psychological distress burnout and secondary traumatic stress among human service professionals.

Science.gov (United States)

Harker, Rachel; Pidgeon, Aileen M; Klaassen, Frances; King, Steven

2016-06-08

Human service professionals are concerned with the intervention and empowerment of vulnerable social populations. The human service industry is laden with employment-related stressors and emotionally demanding interactions, which can lead to deleterious effects, such as burnout and secondary traumatic stress. Little attention has been given to developing knowledge of what might enable human service workers to persist and thrive. Cultivating and sustaining resilience can buffer the impact of occupational stressors on human service professionals. One of the psychological factors associated with cultivating resilience is mindfulness. The aim of this current research is to improve our understanding of the relationship between resilience, mindfulness, burnout, secondary traumatic stress, and psychological distress among human service professionals. The current study surveyed 133 human service professionals working in the fields of psychology, social work, counseling, youth and foster care work to explore the predictive relationship between resilience, mindfulness, and psychological distress. The results showed that higher levels of resilience were a significant predictor of lower levels of psychological distress, burnout and secondary traumatic stress. In addition, higher levels of mindfulness were a significant predictor of lower levels of psychological distress and burnout. The findings suggest that cultivating resilience and mindfulness in human service professionals may assist in preventing psychological distress burnout and secondary traumatic stress. Limitations of this study are discussed together with implications for future research.

Fueling Chemical Engineering Concepts with Biodiesel Production: A Professional Development Experience for High School Pre-Service Teachers

Science.gov (United States)

Gupta, Anju

2015-01-01

This one-day workshop for pre-service teachers was aimed at implementing a uniquely designed and ready-to-implement chemical engineering curriculum in high school coursework. This educational and professional development opportunity introduced: 1) chemical engineering curriculum and career opportunities, 2) basic industrial processes and flow…

Marketing health services: the engineering of satisfaction.

Science.gov (United States)

MacStravic, R S

1984-12-01

Service marketing is the engineering of satisfaction, and the key to success is to identify and influence potential customers' expectations and then to fulfill those expectations. Patient satisfaction largely determines both a program's revenues and expenditures and the effectiveness of care received by patients. A program's ability to satisfy patients rests upon three basic elements: research, design, and communication. Research should be on two levels. The first is basic market assessment and analysis, and should reveal overall market potential by focusing on consumers' expectations, unmet needs, and level of satisfaction. From this stage of research, the organization should be able to identify current programs that are secure and stable, those which have significant growth potential, those which are threatened by competition, and those which have little future. This research also should indicate the potential for new programs and for new markets for existing programs. The second level of research focuses on a specific program (whether current or proposed) and is the basis for program design. The organization can tailor the program to consumers' expectations in everything from services provided to price of parking and other amenities. Research also provides a basis for communications. Not only can communications influence a potential customer to try a provider, but also care providers can use communications during and after the service experience to reinforce what might have been a casual decision. Ideally, all communication that occurs between patients and providers should serve marketing as well as diagnostic and therapeutic purposes. It can shape patients' expectations, reinforce satisfaction when those expectations have been fulfilled, and convey the provider's caring and concern.

Engine Tune-up Service. Unit 2: Charging System. Posttests. Automotive Mechanics Curriculum.

Science.gov (United States)

Richardson, Roger L.; Bacon, E. Miles

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 2, Charging System, available separately as CE 031 208. Focus of the posttest is on the testing of the charging system. One multiple choice posttest is provided, that covers the three performance objectives contained in the unit. (No answer key is…

Corporate Services | College of Engineering & Applied Science

Science.gov (United States)

Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

Ultrafine particles from diesel engines induce vascular oxidative stress via JNK activation.

Science.gov (United States)

Li, Rongsong; Ning, Zhi; Cui, Jeffery; Khalsa, Bhavraj; Ai, Lisong; Takabe, Wakako; Beebe, Tyler; Majumdar, Rohit; Sioutas, Constantinos; Hsiai, Tzung

2009-03-15

Exposure to particulate air pollution is linked to increased incidences of cardiovascular diseases. Ambient ultrafine particles (UFP) from diesel vehicle engines have been shown to be proatherogenic in ApoE knockout mice and may constitute a major cardiovascular risk in humans. We posited that circulating nano-sized particles from traffic pollution sources induce vascular oxidative stress via JNK activation in endothelial cells. Diesel UFP were collected from a 1998 Kenworth truck. Intracellular superoxide assay revealed that these UFP dose-dependently induced superoxide (O(2)(-)) production in human aortic endothelial cells (HAEC). Flow cytometry showed that UFP increased MitoSOX red intensity specific for mitochondrial superoxide. Protein carbonyl content was increased by UFP as an indication of vascular oxidative stress. UFP also up-regulated heme oxygenase-1 (HO-1) and tissue factor (TF) mRNA expression, and pretreatment with the antioxidant N-acetylcysteine significantly decreased their expression. Furthermore, UFP transiently activated JNK in HAEC. Treatment with the JNK inhibitor SP600125 and silencing of both JNK1 and JNK2 with siRNA inhibited UFP-stimulated O(2)(-) production and mRNA expression of HO-1 and TF. Our findings suggest that JNK activation plays an important role in UFP-induced oxidative stress and stress response gene expression.

Green Turning Brown - Domain Engineering for Social and Health Services in Finland.

Science.gov (United States)

Suomi, Reima; Nykänen, Pirkko; Vepsäläinen, Tapio; Hiltunen, Riina

2017-01-01

Being able to design information systems to an untouched domain, without the burden of existing information systems, especially legacy systems, is often seen as a dream of most information system professionals. Uncharted domains are anyway scarce, and often such greenfield projects turn into brownfield projects, also to projects where existing structures severely constrain the development of new systems. In this article we discuss the concepts of greenfield and brownfield domain engineering and software development, and reflect their possible messages to the re-engineering of the Finnish health- and social care ecosystem currently under way. In our fieldwork we could identify a lot of need and wish for greenfield domain engineering in the Finnish health and social services delivery. As well we found a lot of brownfield elements inhibiting change. Our proposal for the future is a ecosystem approach, where new and established elements could live together in a self-governed balance.

Technology and Engineering Education Accommodation Service Profile: An Ex Post Facto Research Design

Science.gov (United States)

Ernst, Jeremy V.; Williams, Thomas O., Jr.

2014-01-01

Technology and engineering educators have an opportunity to serve a vital role in contributing to or assisting in the guidance of educational programming for students qualifying for accommodation services. Within this article, students referred to as at-risk were from two specific special populations within this group: individuals with…

Multicultural personality and posttraumatic stress in U.S. service members.

Science.gov (United States)

Herrera, Catherine J; Owens, Gina P

2015-04-01

Modern military missions place numerous demands on service members, including tactical, personal, and cultural challenges. The purpose of this study was to explore how domains of multicultural personality (cultural empathy, open-mindedness, social initiative, emotional stability, and flexibility) and combat exposure relate to posttraumatic stress disorder (PTSD) in service members. Participants (N = 163) completed the Multicultural Personality Questionnaire, Combat Exposure Scale, and PTSD Checklist-Military as part of an online survey. The majority of participants were Caucasian (87%), mean age was 33 years, and all were deployed at least once to Iraq or Afghanistan Regression results indicated that higher levels of combat exposure and open-mindedness and lower levels of flexibility and emotional stability were significant predictors of higher PTSD severity. The interactions between combat exposure and flexibility and combat exposure and openness were also significant. Higher levels of flexibility and emotional stability seem particularly important in their association with lower PTSD severity for service members. © 2014 Wiley Periodicals, Inc.

A Systems Engineering Approach to Address Human Capital Management Issues in the Shipbuilding Industry

Science.gov (United States)

2008-09-01

sons Nicholas and David. They each experienced the highs and lows (and stress ) of the SEM PD-21 Program as much or more than I, and took up the...Langford, 2007b). For example, a 57 telecommuter (stakeholder) may have a problem with the speed of their home internet service. Needs derived...industry have echoed this need. In Keane’s (2007) presentation to the National Naval Engineering Education Conference, he stressed that successful

Providing engineering services to counties.

Science.gov (United States)

2008-09-01

An engineer is required by law to safeguard the health, safety and welfare of the public. The current Kansas : statute state, The Board of County Commissioners of each county shall appoint a licensed professional : engineer, whose title shall be c...

Professional Service innovations at Consulting Engineering - how change stay flat in project Organisations

DEFF Research Database (Denmark)

Koch, Christian; Bendixen, Mads

understood through a practicebased theory approach using predominantly Actor Network Theory (Latour 2005). The paper focus on attempts to innovate service products, within projects and the remaining organisation. A seven-year cooperation with a consulting engineering, now employing the one of the authors has...... production. One relates to the formation of a building envelope group and a design of a building with a double glass facade, the other to client counselling on realising a public private partnership, a 30 year contract of a public service, where the initial programming was followed. The analysis follows...

Genetically engineered Rice with transcription factor DREB genes for abiotic stress tolerance(abstract)

International Nuclear Information System (INIS)

Datta, S.K.; Datta, K.

2005-01-01

Water stress (drought and Salinity) is the most severe limitation to rice productivity. Several breeding approaches (MAS, QTL) applied to suitable genotypes are in place at IRRI and elsewhere. Phenotyping of water stress tolerance is in progress with potential predictability. Dr. Shinozaki's group has cloned a number of transcription factor genes, which have been shown to work in Arabidopsis to achieve drought, cold, and salinity tolerant plants. None of these genes have as yet displayed their potential functioning in rice. Genetic engineering aims at cross talk between different stress signaling pathways leading to stress tolerance. Osmotic Adjustment (OA) is an effective component of abiotic stress (drought and salinity) tolerance in many plants including rice. When plant experiences water stress, OA contributes to turgor maintenance of both shoots and roots. Conventional breeding could not achieve the OA in rice excepting a few rice cultivars, which are partially adapted to water-stress conditions. Several stress-related genes have now been cloned and transferred in to enhance the osmolytes and some transgenic lines showed increased tolerance to osmotic stress. A few strategies could be effectively deployed for a better understanding of water-stress tolerance in rice and to develop transgenic rice, which can survive for a critical period of water-stress conditions: 1) Switching on of transcription factor regulating the expression of several genes related to abiotic stress, 2) Use of a suitable stress inducible promoter driving the target gene for an efficient and directed expression in plants, 3) Understanding of phenotyping and GxE in a given environment, 4) Selection of a few adaptive rice cultivars suitable in drought/salinity prone areas, 5) Microarray, proteomics, QTL and MAS may expedite the cloning and characterizing the stress induced genes, and 6) Finally, the efficient transformation system for generating a large number of transgenic rice of different

Stress and quality of life among parents of children with congenital heart disease referred for psychological services.

Science.gov (United States)

Kaugars, Astrida; Shields, Clarissa; Brosig, Cheryl

2018-01-01

The study examined parent stress and health-related quality of life (HRQOL) among families of children with congenital heart disease (CHD) referred for psychological services. Parents of 54 children (85% boys) aged 3 to 13 (M age  = 7.48, SD = 2.38) completed measures to assess parenting stress (Parenting Stress Index - Short Form; Pediatric Inventory for Parents) and the PedsQL Family Impact Module. Medical information was retrieved from medical record review. Half of parents of children with single ventricle anatomy had clinically significant levels of parenting stress. Parents of children with single ventricle anatomy reported more frequent illness-related stress and more difficulty dealing with illness-related stress than parents of children with two ventricle anatomy. Younger gestational age at birth and referral for attention or behavior problems were associated with greater likelihood of parent at-risk psychosocial functioning. Among children referred for psychological services, many parents report significant stress and significant negative impact of the child's medical condition on the family. Results underscore the need to consider assessing parent psychosocial functioning and providing additional support for parents of children with CHD. © 2017 Wiley Periodicals, Inc.

Using Student Video Cases to Assess Pre-service Elementary Teachers' Engineering Teaching Responsiveness

Science.gov (United States)

Dalvi, Tejaswini; Wendell, Kristen

2017-10-01

Our study addresses the need for new approaches to prepare novice elementary teachers to teach both science and engineering, and for new tools to measure how well those approaches are working. This in particular would inform the teacher educators of the extent to which novice teachers are developing expertise in facilitating their students' engineering design work. One important dimension to measure is novice teachers' abilities to notice the substance of student thinking and to respond in productive ways. This teacher noticing is particularly important in science and engineering education, where students' initial, idiosyncratic ideas and practices influence the likelihood that particular instructional strategies will help them learn. This paper describes evidence of validity and reliability for the Video Case Diagnosis (VCD) task, a new instrument for measuring pre-service elementary teachers' engineering teaching responsiveness. To complete the VCD, participants view a 6-min video episode of children solving an engineering design problem, describe in writing what they notice about the students' science ideas and engineering practices, and propose how a teacher could productively respond to the students. The rubric for scoring VCD responses allowed two independent scorers to achieve inter-rater reliability. Content analysis of the video episode, systematic review of literature on science and engineering practices, and solicitation of external expert educator responses establish content validity for VCD. Field test results with three different participant groups who have different levels of engineering education experience offer evidence of construct validity.

Engine Tune-Up Service. Unit 5: Fuel and Carburetion Systems. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Goodson, Ludy

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 5, Fuel and Carburetion Systems, available separately as CE 031 217. Focus of the exercises and pretests is inspecting and servicing the fuel and carburetion systems. Pretests and performance checklists are provided for each of the…

Enhancing E. coli tolerance towards oxidative stress via engineering its global regulator cAMP receptor protein (CRP.

Directory of Open Access Journals (Sweden)

Souvik Basak

Full Text Available Oxidative damage to microbial hosts often occurs under stressful conditions during bioprocessing. Classical strain engineering approaches are usually both time-consuming and labor intensive. Here, we aim to improve E. coli performance under oxidative stress via engineering its global regulator cAMP receptor protein (CRP, which can directly or indirectly regulate redox-sensing regulators SoxR and OxyR, and other ~400 genes in E. coli. Error-prone PCR technique was employed to introduce modifications to CRP, and three mutants (OM1~OM3 were identified with improved tolerance via H(2O(2 enrichment selection. The best mutant OM3 could grow in 12 mM H(2O(2 with the growth rate of 0.6 h(-1, whereas the growth of wild type was completely inhibited at this H(2O(2 concentration. OM3 also elicited enhanced thermotolerance at 48°C as well as resistance against cumene hydroperoxide. The investigation about intracellular reactive oxygen species (ROS, which determines cell viability, indicated that the accumulation of ROS in OM3 was always lower than in WT with or without H(2O(2 treatment. Genome-wide DNA microarray analysis has shown not only CRP-regulated genes have demonstrated great transcriptional level changes (up to 8.9-fold, but also RpoS- and OxyR-regulated genes (up to 7.7-fold. qRT-PCR data and enzyme activity assay suggested that catalase (katE could be a major antioxidant enzyme in OM3 instead of alkyl hydroperoxide reductase or superoxide dismutase. To our knowledge, this is the first work on improving E. coli oxidative stress resistance by reframing its transcription machinery through its native global regulator. The positive outcome of this approach may suggest that engineering CRP can be successfully implemented as an efficient strain engineering alternative for E. coli.

Rehabilitation Engineering Service Evaluation: A Follow-Up Survey of Device Effectiveness and Patient Acceptance.

Science.gov (United States)

Caudrey, David J.; Seeger, Barry R.

1983-01-01

A study was undertaken to determine the extent to which a rehabilitation engineering service met the needs and expectations of 100 patients (or parents of child patients). The patients were interviewed an average of 16 weeks after a new piece of equipment was supplied. (Author)

Evaluation of mechano-chemical degradation induced stresses of polyolefin pipes

Energy Technology Data Exchange (ETDEWEB)

Choi, Byoung Ho [Korea Univ., Seoul (Korea, Republic of); Chudnovsky, Alexander [The University of Illinois, Chicago (United States)

2008-07-01

The fracture phenomena in engineering thermoplastics resulting from chemical degradation is usually observed in the form of a microcrack network within a surface layer of degraded polymer exposed to a combined action of mechanical stresses and chemically aggressive environment. Degradation of polymers is usually manifested in a reduction of molecular weight, increase of crystallinity in semi crystalline polymers, increase of material density, a subtle increase in yield strength, and a dramatic reduction in toughness. The critical level of degradation for fracture initiation depends on the rates of toughness deterioration and build-up of the degradation related stresses as well as on the manufacturing and service stresses. In this paper, the evaluation of mechano-chemical degradation induced stress is attempted, and the application of the evaluated stress to the fracture initiation of polymer pipes is presented.

Evaluation of mechano-chemical degradation induced stresses of polyolefin pipes

International Nuclear Information System (INIS)

Choi, Byoung Ho; Chudnovsky, Alexander

2008-01-01

The fracture phenomena in engineering thermoplastics resulting from chemical degradation is usually observed in the form of a microcrack network within a surface layer of degraded polymer exposed to a combined action of mechanical stresses and chemically aggressive environment. Degradation of polymers is usually manifested in a reduction of molecular weight, increase of crystallinity in semi crystalline polymers, increase of material density, a subtle increase in yield strength, and a dramatic reduction in toughness. The critical level of degradation for fracture initiation depends on the rates of toughness deterioration and build-up of the degradation related stresses as well as on the manufacturing and service stresses. In this paper, the evaluation of mechano-chemical degradation induced stress is attempted, and the application of the evaluated stress to the fracture initiation of polymer pipes is presented

14 CFR 33.62 - Stress analysis.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Stress analysis. 33.62 Section 33.62... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.62 Stress analysis. A stress analysis must be performed on each turbine engine showing the design safety margin of each turbine...

Genetic engineering: a promising tool to engender physiological, biochemical and molecular stress resilience in green microalgae

Directory of Open Access Journals (Sweden)

Freddy eGuiheneuf

2016-03-01

Full Text Available As we march into the 21st century, the prevailing scenario of depleting energy resources, global warming and ever increasing issues of human health and food security will quadruple. In this context, genetic and metabolic engineering of green microalgae complete the quest towards a continuum of environmentally clean fuel and food production. Evolutionarily related, but unlike land plants, microalgae need nominal land or water, and are best described as unicellular autotrophs using light energy to fix atmospheric CO2 into algal biomass, mitigating fossil CO2 pollution in the process. Remarkably, a feature innate to most microalgae is synthesis and accumulation of lipids (60–65% of dry weight, carbohydrates and secondary metabolites like pigments and vitamins, especially when grown under abiotic stress conditions. Particularly fruitful, such an application of abiotic stress factors like nitrogen starvation , salinity, heat shock etc. can be used in a biorefinery concept for production of multiple valuable products. The focus of this mini-review underlies metabolic reorientation practices and tolerance mechanisms as applied to green microalgae under specific stress stimuli for a sustainable pollution-free future. Moreover, we entail current progress on genetic engineering as a promising tool to grasp adaptive processes for improving strains with potential biotechnological interests.

Service experience and stress corrosion of Inconel 600 bellows expansion joints in turbine steam environments

International Nuclear Information System (INIS)

Kramer, L.D.; Michael, S.T.; Pement, F.W.

The purpose of this paper is to discuss the service history of Inconel 600 expansion bellows, to illustrate a typical case of failure, propose S.C.C. mechanisms, and to rationalize the most probable mechanism. Inconel 600 is fully resistant to high-purity power plant steam (720 deg F maximum) for on-going service lifetimes which greatly exceed the incubation periods which are reported or postulated in the literature for delayed stress corrosion cracking in high-purity water tests (630-660 deg F). The only observed stress corrosion environments which are sufficiently rapidly deleterious to be consistent with failure lifetimes are molten NaOH in superheated steam or a very concentrated aqueous caustic solution containing silica contamination. (author)

Predicting the service life of connecting rod and main bearings, taking into account different engine loads. Final report; Lebensdauervorhersage fuer Pleuel- und Hauptlager unter Beruecksichtigung unterschiedlicher Motorlastkollektive. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Berkowitz, B.; Lueneburg, B.; Liu, J.

1994-12-31

Connecting rod and main bearings of internal combustion engines are among the most heavily stressed components in modern engines. It was found that these engine components are increasingly reaching the limits of their strength and therefore become the components limiting engine life. However, there is no known process which makes a calculated prediction of the service life of modern connecting rod and main bearings possible, taking into account various engine loads. In this research project, a new concept for the calculated prediction of the service life of non-static highly loaded radial sliding bearings is worked out. The basis is a process of calculation which realistically determines the pressure and gap course in highly loaded sliding bearings. Apart from the viscosity depending on pressure and temperature, the elastic deformations of the system sliding bearing/conn rod are also taken into account. Calculations are done for different operating points for a complete cycle of a four stroke Diesel engine (Daimler-Benz OM 364 LA). The results are compared with the present conventional process of calculation and the effects which occur are discussed. Based on the elasto-hydrodynamic calculation, a method of calculating the service life of non-statically loaded sliding bearings, taking into account various motor loads, is worked out. (orig./HW) [Deutsch] Pleuel- und Hauptlager von Verbrennungskraftmaschinen zaehlen mit zu den spezifisch am hoechsten beanspruchten Bauteilen in modernen Motoren. Es hat sich gezeigt, dass vor allem diese Maschinenelemente zunehmend an die Grenzen ihrer Belastbarkeit stossen und so zum lebensdauerbegrenzenden Bauteil werden. Es ist jedoch kein Verfahren bekannt, das eine rechnerische Lebensdauervorhersage moderner Pleuel- und Hauptlager unter Beruecksichtigung unterschiedlicher Motorlastkollektive ermoeglicht. Im vorliegenden Forschungsvorhaben wird daher ein neuartiges Konzept zur rechnerischen Lebensdauervorhersage von instationaeren

Nondestructive Induced Residual Stress Assessment in Superalloy Turbine Engine Components Using Induced Positron Annihilation (IPA)

International Nuclear Information System (INIS)

Rideout, C. A.; Ritchie, S. J.; Denison, A.

2007-01-01

Induced Positron Analysis (IPA) has demonstrated the ability to nondestructively quantify shot peening/surface treatments and relaxation effects in single crystal superalloys, steels, titanium and aluminum with a single measurement as part of a National Science Foundation SBIR program and in projects with commercial companies. IPA measurement of surface treatment effects provides a demonstrated ability to quantitatively measure initial treatment effectiveness along with the effect of operationally induced changes over the life of the treated component. Use of IPA to nondestructively quantify surface and subsurface residual stresses in turbine engine materials and components will lead to improvements in current engineering designs and maintenance procedures

Implementation of the Orbital Maneuvering Systems Engine and Thrust Vector Control for the European Service Module

Science.gov (United States)

Millard, Jon

2014-01-01

The European Space Agency (ESA) has entered into a partnership with the National Aeronautics and Space Administration (NASA) to develop and provide the Service Module (SM) for the Orion Multipurpose Crew Vehicle (MPCV) Program. The European Service Module (ESM) will provide main engine thrust by utilizing the Space Shuttle Program Orbital Maneuvering System Engine (OMS-E). Thrust Vector Control (TVC) of the OMS-E will be provided by the Orbital Maneuvering System (OMS) TVC, also used during the Space Shuttle Program. NASA will be providing the OMS-E and OMS TVC to ESA as Government Furnished Equipment (GFE) to integrate into the ESM. This presentation will describe the OMS-E and OMS TVC and discuss the implementation of the hardware for the ESM.

Mapping of Mechanical Strains and Stresses around Quiescent Engineered Three-Dimensional Epithelial Tissues

Science.gov (United States)

Gjorevski, Nikolce; Nelson, Celeste M.

2012-01-01

Understanding how physical signals guide biological processes requires qualitative and quantitative knowledge of the mechanical forces generated and sensed by cells in a physiologically realistic three-dimensional (3D) context. Here, we used computational modeling and engineered epithelial tissues of precise geometry to define the experimental parameters that are required to measure directly the mechanical stress profile of 3D tissues embedded within native type I collagen. We found that to calculate the stresses accurately in these settings, we had to account for mechanical heterogeneities within the matrix, which we visualized and quantified using confocal reflectance and atomic force microscopy. Using this technique, we were able to obtain traction forces at the epithelium-matrix interface, and to resolve and quantify patterns of mechanical stress throughout the surrounding matrix. We discovered that whereas single cells generate tension by contracting and pulling on the matrix, the contraction of multicellular tissues can also push against the matrix, causing emergent compression. Furthermore, tissue geometry defines the spatial distribution of mechanical stress across the epithelium, which communicates mechanically over distances spanning hundreds of micrometers. Spatially resolved mechanical maps can provide insight into the types and magnitudes of physical parameters that are sensed and interpreted by multicellular tissues during normal and pathological processes. PMID:22828342

Development of residual stress analysis procedure for fitness-for-service assessment of welded structure

International Nuclear Information System (INIS)

Kim, Jong Sung; Jin, Tae Eun; Dong, P.; Prager, M.

2003-01-01

In this study, a state of art review of existing residual stress analysis techniques and representative solutions is presented in order to develop the residual stress analysis procedure for Fitness-For-Service(FFS) assessment of welded structure. Critical issues associated with existing residual stress solutions and their treatments in performing FFS are discussed. It should be recognized that detailed residual stress evolution is an extremely complicated phenomenon that typically involves material-specific thermomechanical/metallurgical response, welding process physics, and structural interactions within a component being welded. As a result, computational procedures can vary significantly from highly complicated numerical techniques intended only to elucidate a small part of the process physics to cost-effective procedures that are deemed adequate for capturing some of the important features in a final residual stress distribution. Residual stress analysis procedure for FFS purposes belongs to the latter category. With this in mind, both residual stress analysis techniques and their adequacy for FFS are assessed based on both literature data and analyses performed in this investigation

Career Services | College of Engineering & Applied Science

Science.gov (United States)

@ 10:00 am - 2:00 pm Wisconsin Room, UWM Student Union Register today! Engineering Careers Careers in Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering

The Use of Online Current Awareness Services by Natural Sciences and Engineering Faculty at Western Michigan University

Science.gov (United States)

Leatherman, Carrie C.; Eckel, Edward J.

2012-01-01

Nearly every commercial database that covers natural sciences and engineering offers some type of current awareness (CA) service that provides regular updates to users on current literature in a selected field of interest. Current awareness services include e-mail alerts, tables of contents, and RSS feeds. This study was designed to find out what…

[Study on the occupational stress norm and it's application for the marketing group, public service/safety group and production laborer group].

Science.gov (United States)

Yang, Xin-Wei; Wang, Zhi-Ming; Jin, Tai-Yi; Lan, Ya-Jia

2006-09-01

A study of the occupational stress norm and it's application for the marketing group, public service/safety group and production laborer group. In this study, cross-sectional study method is used, and a synthetic way of sorting and randomized sampling is adopted to deal with research targets (36 marketing group, 331 public service/safety group, 903 production laborer group). Descriptive statistics for OSI-R scale scores for the marketing group, public service/safety group and production laborer group were modulated. Scale raw score to T-score conversion tables derived from the OSI-R normative sample for marketing group public service/safety group and production laborer group were established. OSI-R profile from for marketing group, public service/safety group and production laborer group were established. For the ORQ and PSQ scales, scores at or above 70 indicate a strong levels of maladaptive stress and strain. Score in the range of 60 to 69 suggest middle levels of maladaptive stress and strain. Score in the range of 40 to 59 indicate normal levels of stress and strain. Score below 40 indicate a relative absence of occupational stress and strain. For the PRQ scales, score below 30 indicate a significant lack of coping resources. Score in the range of 30 to 39 suggest middle deficits in coping resources. Score in the range of 40 to 59 indicate average coping resources. Scores at or above 60 indicate a strong levels of coping resources. The authors combined subjective and objective environment match model of occupational stress. Different intervention measure should be take to reduce the occupational stress so as to improve the work ability.

Stress amongst nurses working in a healthcare telephone-advice service: relationship with job satisfaction, intention to leave, sickness absence, and performance.

Science.gov (United States)

Farquharson, Barbara; Allan, Julia; Johnston, Derek; Johnston, Marie; Choudhary, Carolyn; Jones, Martyn

2012-07-01

This paper is a report of a study, which assessed levels of stress amongst nurses working in a healthcare telephone-advice service. We explored whether stress related to performance, sickness absence, and intention to leave. Nurses report high levels of stress, as do call-centre workers. The emergence of telephone health advice services means many nurses now work in call-centres, doing work that differs markedly from traditional nursing roles. Stress associated with these roles could have implications for nurses, patients, and service provision. This paper reports cross-sectional survey results. The design of the overall study included longitudinal elements. A comprehensive study of stress was conducted amongst nurses working for a telephone-advice service in Scotland (2008-2010). All nurse-advisors were approached by letter and invited to participate. A total of 152 participants (33%) completed a questionnaire including General Health Questionnaire-12, Work Family Conflict Questionnaire, Job Satisfaction Scale and a measure of intention to leave the telephone-advice service and rated the perceived stress of 2 working shifts. Nurses' employers provided data on sickness absence and performance. Overall levels of psychological distress were similar to those found amongst Scottish women generally. In multiple regression, work-family conflict was identified as a significant predictor of job satisfaction and intention to leave, and significantly related to sickness absence. There were significant correlations between General Health Questionnaire scores and perceived stress of shifts and some performance measures. Work-family conflict is a significant predictor of job satisfaction, intention to leave, and sickness absence amongst telephone helpline nurses. Minimizing the impact of nurses' work on their home lives might reduce turnover and sickness absence. © 2012 Blackwell Publishing Ltd.

Educating the humanitarian engineer.

Science.gov (United States)

Passino, Kevin M

2009-12-01

The creation of new technologies that serve humanity holds the potential to help end global poverty. Unfortunately, relatively little is done in engineering education to support engineers' humanitarian efforts. Here, various strategies are introduced to augment the teaching of engineering ethics with the goal of encouraging engineers to serve as effective volunteers for community service. First, codes of ethics, moral frameworks, and comparative analysis of professional service standards lay the foundation for expectations for voluntary service in the engineering profession. Second, standard coverage of global issues in engineering ethics educates humanitarian engineers about aspects of the community that influence technical design constraints encountered in practice. Sample assignments on volunteerism are provided, including a prototypical design problem that integrates community constraints into a technical design problem in a novel way. Third, it is shown how extracurricular engineering organizations can provide a theory-practice approach to education in volunteerism. Sample completed projects are described for both undergraduates and graduate students. The student organization approach is contrasted with the service-learning approach. Finally, long-term goals for establishing better infrastructure are identified for educating the humanitarian engineer in the university, and supporting life-long activities of humanitarian engineers.

Engineered Nanomaterials Elicit Cellular Stress Responses

Science.gov (United States)

Engineered nanomaterials are being developed continuously and incorporated into consumer products, resulting in increased human exposures. The study of engineered nanomaterials has focused largely on toxicity endpoints without further investigating potential mechanisms or pathway...

Experience within the CERN Civil Engineering Group with Outsourced Design Services

CERN Document Server

Watson, T

1998-01-01

In April 1996, CERN awarded three contracts for civil engineering design services associated with the LHC project. The three contracts were awarded to three different joint ventures of firms from five member states. The total bid price for these services was in excess of 35 MCHF and the contracts will run for up to seven years. This paper aims to discuss and analyze the experience gained to date in the management of these contracts. In particular, the paper will address the issues of conditions of contract and specification for this form of contract. Current experience with each of the three consultants will be presented with the areas of difficulty highlighted. Conclusions will be made regarding future use of such contracts and in particular the way in which CERN must change in order to work efficiently with external designers.

Semantic Service Search, Service Evaluation and Ranking in Service Oriented Environment

Science.gov (United States)

Dong, Hai; Hussain, Farookh Khadeer; Chang, Elizabeth

The theory of Service Oriented Environment (SOE) emerges with advanced connectivity of the Internet technologies, openness of business environment and prosperousness of business activities. Service, as a critical object impenetrating every corner of SOE, is a hot research topic in many research domains. Software Engineering (SE), as a subject in engineering field, its researchers pay more attention to supporting advanced technologies for promoting service activities in SOE. In this paper, we draw the position in the research field of semantic service search, service evaluation and ranking in SOE. By means of the case study and literature review research approach, we discover the research motivations and research issues in this field.

Engineering and management of IT-based service systems an intelligent decision-making support systems approach

CERN Document Server

Gomez, Jorge; Garrido, Leonardo; Perez, Francisco

2014-01-01

Intelligent Decision-Making Support Systems (i-DMSS) are specialized IT-based systems that support some or several phases of the individual, team, organizational or inter-organizational decision making process by deploying some or several intelligent mechanisms. This book pursues the following academic aims: (i) generate a compendium of quality theoretical and applied contributions in Intelligent Decision-Making Support Systems (i-DMSS) for engineering and management IT-based service systems (ITSS); (ii)  diffuse scarce knowledge about foundations, architectures and effective and efficient methods and strategies for successfully planning, designing, building, operating, and evaluating i-DMSS for ITSS, and (iii) create an awareness of, and a bridge between ITSS and i-DMSS academicians and practitioners in the current complex and dynamic engineering and management ITSS organizational. The book presents a collection of 11 chapters referring to relevant topics for both IT service systems and i-DMSS including: pr...

A Numerical Model for Estimation of Service Life of Tribological Systems of the Piston Engine

Directory of Open Access Journals (Sweden)

K. Gavrilov

2017-09-01

Full Text Available This article describes, develops and applies approach of the interaction of rough surfaces for one of the tasks of simulation of tribological systems of the piston engine. In this paper we described the general approach to building a model of interaction between rough surfaces, leading to the analysis of the Markov process. Given the initial data and the method of calculating the trajectory of movable elements on the lubricating layer, we determined the tribological parameters defining the service life of tribological systems of the piston engine on the example of crankshaft bearings.

Psychosocial safety climate: a multilevel theory of work stress in the health and community service sector.

Science.gov (United States)

Dollard, M F; McTernan, W

2011-12-01

Work stress is widely thought to be a significant problem in the health and community services sector. We reviewed evidence from a range of different data sources that confirms this belief. High levels of psychosocial risk factors, psychological health problems and workers compensation claims for stress are found in the sector. We propose a multilevel theoretical model of work stress to account for the results. Psychosocial safety climate (PSC) refers to a climate for psychological health and safety. It reflects the balance of concern by management about psychological health v. productivity. By extending the health erosion and motivational paths of the Job Demands-Resources model we propose that PSC within work organisations predicts work conditions and in turn psychological health and engagement. Over and above this, however, we expect that the external environment of the sector particularly government policies, driven by economic rationalist ideology, is increasing work pressure and exhaustion. These conditions are likely to lead to a reduced quality of service, errors and mistakes.

Methodologic model to scheduling on service systems: a software engineering approach

Directory of Open Access Journals (Sweden)

Eduyn Ramiro Lopez-Santana

2016-06-01

Full Text Available This paper presents an approach of software engineering to a research proposal to make an Expert System to scheduling on service systems using methodologies and processes of software development. We use the adaptive software development as methodology for the software architecture based on the description as a software metaprocess that characterizes the research process. We make UML’s diagrams (Unified Modeling Language to provide a visual modeling that describes the research methodology in order to identify the actors, elements and interactions in the research process.

Engine Tune-Up Service. Unit 3: Primary Circuit. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 3, Primary Circuit, available separately as CE 031 211. Focus of the exercises and pretests is testing the primary ignition circuit. Pretests and performance checklists are provided for each of the eight performance objectives…

Engine Tune-up Service. Unit 2: Charging System. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Richardson, Roger L.; Bacon, E. Miles

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 2, Charging System, available separately as CE 031 208. Focus of the exercises and pretests is testing the charging system. Pretests and performance checklists are provided for each of the three performance objectives contained in…

Spatial variability in the coefficient of thermal expansion induces pre-service stresses in computer models of virgin Gilsocarbon bricks

International Nuclear Information System (INIS)

Arregui-Mena, José David; Margetts, Lee; Griffiths, D.V.; Lever, Louise; Hall, Graham; Mummery, Paul M.

2015-01-01

In this paper, the authors test the hypothesis that tiny spatial variations in material properties may lead to significant pre-service stresses in virgin graphite bricks. To do this, they have customised ParaFEM, an open source parallel finite element package, adding support for stochastic thermo-mechanical analysis using the Monte Carlo Simulation method. For an Advanced Gas-cooled Reactor brick, three heating cases have been examined: a uniform temperature change; a uniform temperature gradient applied through the thickness of the brick and a simulated temperature profile from an operating reactor. Results are compared for mean and stochastic properties. These show that, for the proof-of-concept analyses carried out, the pre-service von Mises stress is around twenty times higher when spatial variability of material properties is introduced. The paper demonstrates that thermal gradients coupled with material incompatibilities may be important in the generation of stress in nuclear graphite reactor bricks. Tiny spatial variations in coefficient of thermal expansion (CTE) and Young's modulus can lead to the presence of thermal stresses in bricks that are free to expand. - Highlights: • Open source software has been modified to include random variability in CTE and Young's modulus. • The new software closely agrees with analytical solutions and commercial software. • Spatial variations in CTE and Young's modulus produce stresses that do not occur with mean values. • Material variability may induce pre-service stress in virgin graphite.

Spatial variability in the coefficient of thermal expansion induces pre-service stresses in computer models of virgin Gilsocarbon bricks

Energy Technology Data Exchange (ETDEWEB)

Arregui-Mena, José David, E-mail: jose.arreguimena@postgrad.manchester.ac.uk [School of Mechanical, Aerospace, and Civil Engineering, University of Manchester, Oxford Road, Manchester, M13 9PL (United Kingdom); Margetts, Lee, E-mail: lee.margetts@manchester.ac.uk [School of Mechanical, Aerospace, and Civil Engineering, University of Manchester, Oxford Road, Manchester, M13 9PL (United Kingdom); Griffiths, D.V., E-mail: d.v.griffiths@mines.edu [Colorado School of Mines, 1500 Illinois St, Golden, CO 80401 (United States); Lever, Louise, E-mail: louise.lever@manchester.ac.uk [Research Computing, University of Manchester, Oxford Road, Manchester, M13 9PL (United Kingdom); Hall, Graham, E-mail: graham.n.hall@manchester.ac.uk [School of Mechanical, Aerospace, and Civil Engineering, University of Manchester, Oxford Road, Manchester, M13 9PL (United Kingdom); Mummery, Paul M., E-mail: paul.m.mummery@manchester.ac.uk [School of Mechanical, Aerospace, and Civil Engineering, University of Manchester, Oxford Road, Manchester, M13 9PL (United Kingdom)

2015-10-15

In this paper, the authors test the hypothesis that tiny spatial variations in material properties may lead to significant pre-service stresses in virgin graphite bricks. To do this, they have customised ParaFEM, an open source parallel finite element package, adding support for stochastic thermo-mechanical analysis using the Monte Carlo Simulation method. For an Advanced Gas-cooled Reactor brick, three heating cases have been examined: a uniform temperature change; a uniform temperature gradient applied through the thickness of the brick and a simulated temperature profile from an operating reactor. Results are compared for mean and stochastic properties. These show that, for the proof-of-concept analyses carried out, the pre-service von Mises stress is around twenty times higher when spatial variability of material properties is introduced. The paper demonstrates that thermal gradients coupled with material incompatibilities may be important in the generation of stress in nuclear graphite reactor bricks. Tiny spatial variations in coefficient of thermal expansion (CTE) and Young's modulus can lead to the presence of thermal stresses in bricks that are free to expand. - Highlights: • Open source software has been modified to include random variability in CTE and Young's modulus. • The new software closely agrees with analytical solutions and commercial software. • Spatial variations in CTE and Young's modulus produce stresses that do not occur with mean values. • Material variability may induce pre-service stress in virgin graphite.

Engine Tune-Up Service. Unit 1: Battery and Cranking System. Posttests. Automotive Mechanics Curriculum.

Science.gov (United States)

Goodson-Roberts, Ludy; And Others

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 1, Battery and Cranking System. Focus of the posttests is the testing of the battery and cranking system. Four multiple choice posttests are provided, one for each of the performance objectives contained in the unit. (No answer keys are provided.)…

Neutron measurement of residual stresses in a used railway rail

International Nuclear Information System (INIS)

Webster, P.J.; Low, K.S.; Mills, G.; Webster, G.A.

1990-01-01

The high resolution neutron diffraction technique has been applied to determine, non-destructively, the residual stress distribution developed in the head of a railway rail after normal service. Measurements were made, using the neutron strain scanner at the Institute Laue Langevin, Grenoble, on a transverse slice of rail 12mm thick taken from a section of straight track. The rail head was scanned in the three principal orientations in a series of parallel traverses sufficiently close to enable a two-dimensional matrix of data to be accumulated and vertical, transverse and longitudinal residual stress contours to be drawn. The results demonstrate the effectiveness and unique characteristics of the neutron technique to determine nondestructively and continuously the residual stresses inside engineering components

Balkanized research in ecological engineering revealed by a bibliometric analysis of earthworms and ecosystem services.

Science.gov (United States)

Blouin, Manuel; Sery, Nicolas; Cluzeau, Daniel; Brun, Jean-Jacques; Bédécarrats, Alain

2013-08-01

Energy crisis, climate changes, and biodiversity losses have reinforced the drive for more ecologically-based approaches for environmental management. Such approaches are characterized by the use of organisms rather than energy-consuming technologies. Although earthworms are believed to be potentially useful organisms for managing ecosystem services, there is actually no quantification of such a trend in literature. This bibliometric analysis aimed to measure the evolution of the association of "earthworms" and other terms such as ecosystem services (primary production, nutrient cycling, carbon sequestration, soil structure, and pollution remediation), "ecological engineering" or "biodiversity," to assess their convergence or divergence through time. In this aim, we calculated the similarity index, an indicator of the paradigmatic proximity defined in applied epistemology, for each year between 1900 and 2009. We documented the scientific fields and the geographical origins of the studies, as well as the land uses, and compare these characteristics with a 25 years old review on earthworm management. The association of earthworm related keywords with ecosystem services related keywords was increasing with time, reflecting the growing interest in earthworm use in biodiversity and ecosystem services management. Conversely, no significant increase in the association between earthworms and disciplines such as ecological engineering or restoration ecology was observed. This demonstrated that general ecologically-based approaches have yet to emerge and that there is little exchange of knowledge, methods or concepts among balkanized application realms. Nevertheless, there is a strong need for crossing the frontiers between fields of application and for developing an umbrella discipline to provide a framework for the use of organisms to manage ecosystem services.

Collaborative Science Using Web Services and the SciFlo Grid Dataflow Engine

Science.gov (United States)

Wilson, B. D.; Manipon, G.; Xing, Z.; Yunck, T.

2006-12-01

The General Earth Science Investigation Suite (GENESIS) project is a NASA-sponsored partnership between the Jet Propulsion Laboratory, academia, and NASA data centers to develop a new suite of Web Services tools to facilitate multi-sensor investigations in Earth System Science. The goal of GENESIS is to enable large-scale, multi-instrument atmospheric science using combined datasets from the AIRS, MODIS, MISR, and GPS sensors. Investigations include cross-comparison of spaceborne climate sensors, cloud spectral analysis, study of upper troposphere-stratosphere water transport, study of the aerosol indirect cloud effect, and global climate model validation. The challenges are to bring together very large datasets, reformat and understand the individual instrument retrievals, co-register or re-grid the retrieved physical parameters, perform computationally-intensive data fusion and data mining operations, and accumulate complex statistics over months to years of data. To meet these challenges, we have developed a Grid computing and dataflow framework, named SciFlo, in which we are deploying a set of versatile and reusable operators for data access, subsetting, registration, mining, fusion, compression, and advanced statistical analysis. SciFlo leverages remote Web Services, called via Simple Object Access Protocol (SOAP) or REST (one-line) URLs, and the Grid Computing standards (WS-* &Globus Alliance toolkits), and enables scientists to do multi-instrument Earth Science by assembling reusable Web Services and native executables into a distributed computing flow (tree of operators). The SciFlo client &server engines optimize the execution of such distributed data flows and allow the user to transparently find and use datasets and operators without worrying about the actual location of the Grid resources. In particular, SciFlo exploits the wealth of datasets accessible by OpenGIS Consortium (OGC) Web Mapping Servers & Web Coverage Servers (WMS/WCS), and by Open Data

The Advanced Modeling, Simulation and Analysis Capability Roadmap Vision for Engineering

Science.gov (United States)

Zang, Thomas; Lieber, Mike; Norton, Charles; Fucik, Karen

2006-01-01

This paper summarizes a subset of the Advanced Modeling Simulation and Analysis (AMSA) Capability Roadmap that was developed for NASA in 2005. The AMSA Capability Roadmap Team was chartered to "To identify what is needed to enhance NASA's capabilities to produce leading-edge exploration and science missions by improving engineering system development, operations, and science understanding through broad application of advanced modeling, simulation and analysis techniques." The AMSA roadmap stressed the need for integration, not just within the science, engineering and operations domains themselves, but also across these domains. Here we discuss the roadmap element pertaining to integration within the engineering domain, with a particular focus on implications for future observatory missions. The AMSA products supporting the system engineering function are mission information, bounds on information quality, and system validation guidance. The Engineering roadmap element contains 5 sub-elements: (1) Large-Scale Systems Models, (2) Anomalous Behavior Models, (3) advanced Uncertainty Models, (4) Virtual Testing Models, and (5) space-based Robotics Manufacture and Servicing Models.

Understanding Parental Stress within the Scallywags Service for Children with Emotional and Behavioural Difficulties

Science.gov (United States)

Broadhead, Moira; Chilton, Roy; Crichton, Catriona

2009-01-01

The Scallywags service works specifically within home and school environments to promote parent, teacher and child competencies for children at risk of developing behavioural and/or emotional problems. The scheme has been successfully evaluated, demonstrating significant reductions in parental stress for parents involved in the scheme. This paper…

Study on fracture and stress corrosion cracking behavior of casing sour service materials

International Nuclear Information System (INIS)

Sequera, C.; Gordon, H.

2003-01-01

Present work describes sulphide stress corrosion cracking and fracture toughness tests performed to high strength sour service materials of T-95, C-100 and C-110 oil well tubular grades. P-110 was considered as a reference case, since it is one of the high strength materials included in specification 5CT of American Petroleum Institute, API. Sulphide stress corrosion cracking, impact and fracture toughness values obtained in the tests show that there is a correspondence among them. A decreasing classification order was established, namely C-100, T-95, C-110 and P-110. Special grades steels studied demonstrated a better behavior in the evaluated properties than the reference case material grade: P-110. Results obtained indicate that a higher sulphide stress corrosion cracking resistance is related to a higher toughness. The fracture toughness results evidence the hydrogen influence on reducing the toughness values. (author)

Probing Earth's State of Stress

Science.gov (United States)

Delorey, A. A.; Maceira, M.; Johnson, P. A.; Coblentz, D. D.

2016-12-01

The state of stress in the Earth's crust is a fundamental physical property that controls both engineered and natural systems. Engineered environments including those for hydrocarbon, geothermal energy, and mineral extraction, as well those for storage of wastewater, carbon dioxide, and nuclear fuel are as important as ever to our economy and environment. Yet, it is at spatial scales relevant to these activities where stress is least understood. Additionally, in engineered environments the rate of change in the stress field can be much higher than that of natural systems. In order to use subsurface resources more safely and effectively, we need to understand stress at the relevant temporal and spatial scales. We will present our latest results characterizing the state of stress in the Earth at scales relevant to engineered environments. Two important components of the state of stress are the orientation and magnitude of the stress tensor, and a measure of how close faults are to failure. The stress tensor at any point in a reservoir or repository has contributions from both far-field tectonic stress and local density heterogeneity. We jointly invert seismic (body and surface waves) and gravity data for a self-consistent model of elastic moduli and density and use the model to calculate the contribution of local heterogeneity to the total stress field. We then combine local and plate-scale contributions, using local indicators for calibration and ground-truth. In addition, we will present results from an analysis of the quantity and pattern of microseismicity as an indicator of critically stressed faults. Faults are triggered by transient stresses only when critically stressed (near failure). We show that tidal stresses can trigger earthquakes in both tectonic and reservoir environments and can reveal both stress and poroelastic conditions.

Simulated Service and Stress Corrosion Cracking Testing for Friction Stir Welded Spun Formed Domes

Science.gov (United States)

Stewart, Thomas J.; Torres, Pablo D.; Caratus, Andrei A.; Curreri, Peter A.

2010-01-01

Simulated service testing (SST) development was required to help qualify a new 2195 aluminum lithium (Al-Li) alloy spin forming dome fabrication process for the National Aeronautics and Space Administration (NASA) Exploration Development Technology Program. The application for the technology is to produce high strength low weight tank components for NASA s next generation launch vehicles. Since plate material is not currently manufactured large enough to fabricate these domes, two plates are joined by means of friction stir welding. The plates are then pre-contour machined to near final thicknesses allowing for a thicker weld land and anticipating the level of stretch induced by the spin forming process. The welded plates are then placed in a spin forming tool and hot stretched using a trace method producing incremental contours. Finally the dome receives a room temperature contour stretch to final dimensions, heat treatment, quenching, and artificial aging to emulate a T-8 condition of temper. Stress corrosion cracking (SCC) tests were also performed by alternate immersion in a sodium chloride (NaCl) solution using the typical double beam assembly and with 4-point loaded specimens and use of bent-beam stress-corrosion test specimens under alternate immersion conditions. In addition, experiments were conducted to determine the threshold stress intensity factor for SCC (K(sub ISCC)) which to our knowledge has not been determined previously for Al-Li 2195 alloy. The successful simulated service and stress corrosion testing helped to provide confidence to continue to Ares 1 scale dome fabrication

Fibrocartilage tissue engineering: the role of the stress environment on cell morphology and matrix expression.

Science.gov (United States)

Thomopoulos, Stavros; Das, Rosalina; Birman, Victor; Smith, Lester; Ku, Katherine; Elson, Elliott L; Pryse, Kenneth M; Marquez, Juan Pablo; Genin, Guy M

2011-04-01

Although much is known about the effects of uniaxial mechanical loading on fibrocartilage development, the stress fields to which fibrocartilaginous regions are subjected to during development are mutiaxial. That fibrocartilage develops at tendon-to-bone attachments and in compressive regions of tendons is well established. However, the three-dimensional (3D) nature of the stresses needed for the development of fibrocartilage is not known. Here, we developed and applied an in vitro system to determine whether fibrocartilage can develop under a state of periodic hydrostatic tension in which only a single principal component of stress is compressive. This question is vital to efforts to mechanically guide morphogenesis and matrix expression in engineered tissue replacements. Mesenchymal stromal cells in a 3D culture were exposed to compressive and tensile stresses as a result of an external tensile hydrostatic stress field. The stress field was characterized through mechanical modeling. Tensile cyclic stresses promoted spindle-shaped cells, upregulation of scleraxis and type one collagen, and cell alignment with the direction of tension. Cells experiencing a single compressive stress component exhibited rounded cell morphology and random cell orientation. No difference in mRNA expression of the genes Sox9 and aggrecan was observed when comparing tensile and compressive regions unless the medium was supplemented with the chondrogenic factor transforming growth factor beta3. In that case, Sox9 was upregulated under static loading conditions and aggrecan was upregulated under cyclic loading conditions. In conclusion, the fibrous component of fibrocartilage could be generated using only mechanical cues, but generation of the cartilaginous component of fibrocartilage required biologic factors in addition to mechanical cues. These studies support the hypothesis that the 3D stress environment influences cell activity and gene expression in fibrocartilage development.

Benefits and challenges of using service dogs for veterans with posttraumatic stress disorder.

Science.gov (United States)

Yarborough, Bobbi Jo H; Stumbo, Scott P; Yarborough, Micah T; Owen-Smith, Ashli; Green, Carla A

2018-04-26

Veterans with posttraumatic stress disorder (PTSD) are increasingly seeking service dogs to help them manage trauma-related symptoms, yet literature describing service dog use in this population is scant. The goal of this study was to document the benefits and challenges experienced by veterans with service dogs trained to assist with PTSD-related needs. Participants were veterans (N = 41) with service dogs, and their caregivers (n = 8), recruited through community-based service dog training agencies. We conducted in-depth interviews and observed training sessions as part of a larger study, and used thematic analysis to characterize data. Veterans reported that service dogs reduced hypervigilance by alerting and creating boundaries, and disrupted nightmares, improving sleep quality and duration. Dogs also helped veterans turn their attention away from invasive trauma-related thoughts. Additional reported benefits included improved emotional connections with others, increased community participation and physical activity, and reduced suicidal impulses and medication use. Demands of training, adjustment to life with a service dog, and delayed benefits were challenging for many veterans and caregivers. Veterans report that service dogs help reduce PTSD symptoms and facilitate recovery and realization of meaningful goals. Service dogs may be a reasonable option for veterans who are reluctant to pursue or persist with traditional evidence-based treatments. Additional rigorous research on the effectiveness of service dogs for this population is warranted. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Report on the workshop on neutrons for engineering and its conclusions regarding the residual-stress diffractometer at the Australian Replacement Research Reactor

International Nuclear Information System (INIS)

2002-01-01

The purpose of the workshop was to: inform the Australian research organizations and universities of the capabilities of an engineering and materials science instrument; promote the use of neutron diffraction to map and investigate strains/stresses in materials and components for industrial applications and research; identify the future needs and opportunities in this area; present the options for a stress mapping diffractometer at the Replacement Research Reactor and receive feedback on these options; identify the ancillary equipment and facilities required. Presented papers and discussions at the workshop indicated that there are a number of important benefits to Australia in the building of a first-class instrument for materials science and engineering and many residual stress-related problems in a wide variety of fields in Australia, such as the manufacturing industries, mining, oil and gas, rail transport, defense and life extension. Stress scanning provides another tool for solving problems to complement facilities at the major research institutes, CSIRO, AMIRA, DSTO, ANSTO and the universities. It will create a regional pool of experts who may tap into the pool of expertise internationally. The turn around time for tests for Australian customers will be reduced thus avoiding having to go overseas to have the tests performed. From an educational perspective the instrument will build expertise in Australia and will help to attract graduates into engineering. A detailed list of the attendees and affiliations is in Appendix C

Effect of autogenic training on cardiac autonomic nervous activity in high-risk fire service workers for posttraumatic stress disorder.

Science.gov (United States)

Mitani, Satoko; Fujita, Masatoshi; Sakamoto, Satoko; Shirakawa, Taro

2006-05-01

We investigated the effect of autogenic training (AT) on cardiac autonomic nervous activity in fire services workers with the use of the questionnaire of the Japanese-language version of Impact of Event Scale-Revised (IES-R-J) and indexes of heart rate variability. We studied 22 male fire services workers who were divided into posttraumatic stress disorder (PTSD)-related stress group (n=10) and control group (n=12). They underwent AT twice or three times a week for 2 months. Posttraumatic stress disorder-related stress group showed a significantly higher cardiac sympathetic nervous activity and a significantly lower cardiac parasympathetic nervous activity than control group at baseline. Autogenic training significantly decreased cardiac sympathetic nervous activity and significantly increased cardiac parasympathetic nervous activity in both groups. These changes were accompanied by a significant decrease in the total points of IES-R-J. Autogenic training is effective for ameliorating the disturbance of cardiac autonomic nervous activity and psychological issues secondary to PTSD.

Fluvial gravel stabilization by net-spinning Hydropsychid caddisflies: exploring the magnitude and geographic scope of ecosystem engineering effect and evaluating resistance to anthropogenic stresses

Science.gov (United States)

Daniels, M.; Albertson, L.; Sklar, L. S.; Tumolo, B.; Mclaughlin, M. K.

2017-12-01

Several studies have demonstrated the substantial effects that organisms can have on earth surface processes. Known as ecosystem engineers, in streams these organisms maintain, modify, or create physical habitat structure by influencing fluvial processes such as gravel movement, fine sediment deposition and bank erosion. However, the ecology of ecosystem engineers and the magnitude of ecosystem engineering effects in a world increasingly influence by anthropogenically-driven changes is not well understood. Here we present a synthesis of research findings on the potential gravel stabilization effects of Hydropsychid caddisflies, a globally distributed group of net-spinning insects that live in the benthic substrate of most freshwater streams. Hydropsychid caddisflies act as ecosystem engineers because these silk structures can fundamentally alter sediment transport conditions, including sediment stability and flow currents. The silk nets spun by these insects attach gravel grains to one another, increasing the shear stress required to initiate grain entrainment. In a series of independent laboratory experiments, we investigate the gravel size fractions most affected by these silk attachments. We also investigate the role of anthropogenic environmental stresses on ecosystem engineering potential by assessing the impact of two common stressors, high fine sediment loads and stream drying, on silk structures. Finally, an extensive field survey of grain size and Hydropsychid caddisfly population densities informs a watershed-scale network model of Hydropsychid caddisfly gravel stabilizing potential. Our findings provide some of the first evidence that caddisfly silk may be a biological structure that is resilient to various forms of human-mediated stress and that the effects of animal ecosystem engineers are underappreciated as an agent of resistance and recovery for aquatic communities experiencing changes in sediment loads and hydrologic regimes.

Work stress and subsequent risk of internet addiction among information technology engineers in Taiwan.

Science.gov (United States)

Chen, Sung-Wei; Gau, Susan Shur-Fen; Pikhart, Hynek; Peasey, Anne; Chen, Shih-Tse; Tsai, Ming-Chen

2014-08-01

Work stress, as defined by the Demand-Control-Support (DCS) model and the Effort-Reward Imbalance (ERI) model, has been found to predict risks for depression, anxiety, and substance addictions, but little research is available on work stress and Internet addiction. The aims of this study are to assess whether the DCS and ERI models predict subsequent risks of Internet addiction, and to examine whether these associations might be mediated by depression and anxiety. A longitudinal study was conducted in a sample (N=2,550) of 21-55 year old information technology engineers without Internet addiction. Data collection included questionnaires covering work stress, demographic factors, psychosocial factors, substance addictions, Internet-related factors, depression and anxiety at wave 1, and the Internet Addiction Test (IAT) at wave 2. Ordinal logistic regression was used to assess the associations between work stress and IAT; path analysis was adopted to evaluate potentially mediating roles of depression and anxiety. After 6.2 months of follow-up, 14.0% of subjects became problematic Internet users (IAT 40-69) and 4.1% pathological Internet users (IAT 70-100). Job strain was associated with an increased risk of Internet addiction (odds ratio [OR] of having a higher IAT outcome vs. a lower outcome was 1.53); high work social support reduced the risk of Internet addiction (OR=0.62). High ER ratio (OR=1.61) and high overcommitment (OR=1.68) were associated with increased risks of Internet addiction. Work stress defined by the DCS and ERI models predicted subsequent risks of Internet addiction.

Risk analysis of in-service pressure piping containing defects

International Nuclear Information System (INIS)

Lin, Y.C.; Xie, Y.J.; Wang, X.H.; Luo, H.

2004-01-01

The reliability of pressure piping containing defects is important in engineering. The failure probability of pressure piping containing defects may be used as a guide to the most economic deployment of resources on maintenance, inspection and repair. This paper presents a probabilistic assessment methodology for in-service pressure piping containing defects, which is especially designed for programming. It is based on three assessment codes, BS 7910, R6 and SAPV-99, considering uncertainties in operating loadings, flaw sizes, material fracture toughness and flow stress. A general sampling computation method of stress intensity factor (SIF), in the form of the relationship between SIF and axial force and bending moment and torsion, is adopted. This relationship has been successfully used in developing software, Safety Assessment System of In-service Pressure Piping Containing Flaws (SAPP-2003), to assess planar and non-planar flaws. A numerical example is presented to illustrate the application of SAPP-2003 for calculating the failure probabilities of separate defects and for the assessed pressure piping

Programming Google App Engine

CERN Document Server

Sanderson, Dan

2010-01-01

As one of today's cloud computing services, Google App Engine does more than provide access to a large system of servers. It also offers you a simple model for building applications that scale automatically to accommodate millions of users. With Programming Google App Engine, you'll get expert practical guidance that will help you make the best use of this powerful platform. Google engineer Dan Sanderson shows you how to design your applications for scalability, including ways to perform common development tasks using App Engine's APIs and scalable services. You'll learn about App Engine's a

Engineering hydro's future

International Nuclear Information System (INIS)

Anderson, J.L.

1992-01-01

In this challenging hydropower market, hydropower engineering services are in high demand. The number of new hydropower projects entering the pipeline may have slowed in recent years but that does not mean work is not being done. Independent developers, utilities and municipalities are carrying out a considerable amount of hydropower activity. Whatever the work involves - preliminary planning, licensing and relicensing, environmental mitigation, plant rehabilitation or new-plant startup - engineering firms are finding a brisk market for their services. The complexity of the regulatory framework makes hydropower facility and other water resource work more important then ever. Executives of three engineering firms - Acres International, Harza Engineering and Black and Veatch - active in these areas discuss their views on the future of the hydropower engineering market

Methods for predicting isochronous stress-strain curves

International Nuclear Information System (INIS)

Kiyoshige, Masanori; Shimizu, Shigeki; Satoh, Keisuke.

1976-01-01

Isochronous stress-strain curves show the relation between stress and total strain at a certain temperature with time as a parameter, and they are drawn up from the creep test results at various stress levels at a definite temperature. The concept regarding the isochronous stress-strain curves was proposed by McVetty in 1930s, and has been used for the design of aero-engines. Recently the high temperature characteristics of materials are shown as the isochronous stress-strain curves in the design guide for the nuclear energy equipments and structures used in high temperature creep region. It is prescribed that these curves are used as the criteria for determining design stress intensity or the data for analyzing the superposed effects of creep and fatigue. In case of the isochronous stress-strain curves used for the design of nuclear energy equipments with very long service life, it is impractical to determine the curves directly from the results of long time creep test, accordingly the method of predicting long time stress-strain curves from short time creep test results must be established. The method proposed by the authors, for which the creep constitution equations taking the first and second creep stages into account are used, and the method using Larson-Miller parameter were studied, and it was found that both methods were reliable for the prediction. (Kako, I.)

Leaders' strategies for dealing with own and their subordinates' stress in public human service organisations.

Science.gov (United States)

Skagert, Katrin; Dellve, Lotta; Eklöf, Mats; Pousette, Anders; Ahlborg, Gunnar

2008-11-01

Despite the acknowledged key role of leaders for psychosocial work environment, few studies focus on how leaders can decrease work-related stress. To gain deeper knowledge of leaders' perceptions and strategies for dealing with their own and their subordinates' stress in public human service organisations (HSO), qualitative interviews were made with leaders from hospitals and regional social insurance offices (n=21), and analysed in line with grounded theory method. The leaders handled subordinates' stress and perceived leadership demands by acting as shock absorber (core category) and used strategies characterised as leading in continuous change whilst maintaining trustworthiness. To cope with their own stress from perceived leadership demands, they tried to sustain their own integrity (core category) by either identifying with or distancing themselves from the leader role. The strategies for dealing with leaders' own and subordinates' exposures to stressors was pervaded by perceived leadership demands and are probably influencing each other. Supportive structures and improved communication about everyday dilemmas seem to be needed in order, not just to prevent stress reactions, but to improve the basic conditions for practicing leadership in HSO.

Effect of short- and long-term heat stress on the conception risk of dairy cows under natural service and artificial insemination breeding programs.

Science.gov (United States)

Schüller, L-K; Burfeind, O; Heuwieser, W

2016-04-01

The objectives of this retrospective study were to examine the effect of heat stress on natural service and artificial insemination (AI) breeding methods. We investigated the influence of short- and long-term heat stress on the conception risk (CR) of dairy cows bred by natural service or by AI with frozen-thawed or fresh semen. In addition, the relationship between breeding method and parity was determined. Cows bred by AI with frozen-thawed semen exposed to long-term heat stress (mean temperature-humidity index ≥73 in the period 21d before breeding) were 63% less likely to get pregnant compared with cows not exposed to heat stress. Cows bred by AI with fresh semen were 80% less likely to get pregnant during periods of short-term heat stress than during periods without heat stress. Furthermore, multiparous cows bred by AI with frozen-thawed or fresh semen were 22 and 67% less likely to get pregnant, respectively, than primiparous cows. No influence of heat stress or parity was noted on the CR of cows bred by natural service. The present study indicates that the likelihood of dairy cows becoming pregnant is reduced by short- and long-term heat stress depending on the type of semen employed. In particular, CR of cows inseminated with fresh semen is negatively affected by short-term heat stress and CR of cows inseminated with frozen-thawed semen is negatively affected by long-term heat stress. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

[Occupational stress in assembly line workers in electronics manufacturing service and related influencing factors].

Science.gov (United States)

Ji, Y Q; Li, S; Wang, C; Wang, J; Liu, X M

2016-10-20

Objective: To investigate occupational stress in assembly line workers in electronics manu-facturing service (EMS) and related influencing factors. Methods: From June to October, 2015, a cross-sectional survey was performed for 5 944 assembly line workers in EMS (observation group) and 6 270 workers from other posts (non-assembly line workers and management personnel; control group) using the self-made questionnaire for basic information, job demand-control (JDC) model questionnaire, and effort-reward imbalance (ERI) model questionnaire to collect respondents' basic information and occupational stress. Results: The observation group had significantly lower work autonomy, social support, and work reward scores than the control group (2.72 ± 0.63/3.64 ± 0.68/4.06 ± 0.80 vs 3.00 ± 0.67/3.83 ± 0.68/4.24 ± 0.75, t =23.53, 15.41, and 12.70, all P occupational stress determined by JDC and ERI models than the control group (64.5%/12.7% vs 52.6%/9.9%, χ 2 =182.26 and 23.41, both P 60 hours/week, and sleeping time occupational stress in JDC model; education background of Bachelor's degree or above, working time >60 hours/week, and sleeping timeoccupational stress in ERI model, while female sex and a high monthly income reduced the risk of occupational stress in ERI model. Conclusion: Assembly line workers in EMS are a relatively vulnerable group and have a high degree of occupational stress. Working time >60 hours/week and sleeping time occupational stress.

The Impact of Ict on Business Models for Delivery Of ConsultancyServices - The Case Of Technical Engineering

DEFF Research Database (Denmark)

Falch, Morten; Nicolajsen, Hanne Westh

2009-01-01

This paper analyses the impact of the use of ICT in production and delivery of technical engineering consultancy services on business structures with regard to industry convergence and transaction costs. The paper takes an empirical study on the introduction of 3D-modelling tools in the building...... section in a Scandinavian engineering consultancy firm as its point of departure. The discussion identifies three different structural aspects, which all are affected by the use of ICT: Internationalisation vs. Local markets, Outsourcing vs. Structural integration, and Division of work between actors...

Engineering, Analysis and Technology FY 1995 Site Support Program Plan

International Nuclear Information System (INIS)

Suyama, R.M.

1994-09-01

The vision of the Engineering, Analysis and Technology organization is to be recognized as the cost-effective supplier of specialized, integrated, multi-disciplined engineering teams to support Hanford missions. The mission of the Engineering, Analysis and Technology organization is to provide centralized engineering services. These services are focused on supplying technical design, analytical engineering and related support services that support Hanford's environmental restoration mission. These services include engineering analysis, design and development of systems and engineered equipment, supplying multi-disciplined engineering teams to all Hanford programs and project organizations, engineering document release, and site-wide leadership in the development and implementation of engineering standards, engineering practices, and configuration management processes

Identifying the Gaps of Fourth Year Degree Pre-Service Teachers' Pedagogical Content Knowledge in Teaching Engineering Graphics and Design

Science.gov (United States)

Khoza, Samuel Dumazi

2017-01-01

Engineering Graphics and Design is a technological subject which is offered in the Bachelor of Education degree from third to fourth year of the degree course. Fourth year pre-service teachers find EGD difficult to teach because of various reasons. Therefore the aim of the paper was to investigate fourth year pre-service teachers' pedagogical…

Emotional engineering

CERN Document Server

In an age of increasing complexity, diversification and change, customers expect services that cater to their needs and to their tastes. Emotional Engineering vol 2. describes how their expectations can be satisfied and managed throughout the product life cycle, if producers focus their attention more on emotion. Emotional engineering provides the means to integrate products to create a new social framework and develops services beyond product realization to create of value across a full lifetime.  14 chapters cover a wide range of topics that can be applied to product, process and industry development, with special attention paid to the increasing importance of sensing in the age of extensive and frequent changes, including: • Multisensory stimulation and user experience  • Physiological measurement • Tactile sensation • Emotional quality management • Mental model • Kansei engineering.   Emotional Engineering vol 2 builds on Dr Fukuda’s previous book, Emotional Engineering, and provides read...

Bond strength and stress measurements in thermal barrier coatings

Energy Technology Data Exchange (ETDEWEB)

Gell, M.; Jordan, E. [Univ. of Connecticut, Storrs, CT (United States)

1995-10-01

Thermal barrier coatings have been used extensively in aircraft gas turbines for more than 15 years to insulate combustors and turbine vanes from the hot gas stream. Plasma sprayed thermal barrier coatings (TBCs) provide metal temperature reductions as much as 300{degrees}F, with improvements in durability of two times or more being achieved. The introduction of TBCs deposited by electron beam physical vapor deposition (EB-PVD) processes in the last five years has provided a major improvement in durability and also enabled TBCs to be applied to turbine blades for improved engine performance. To meet the aggressive Advanced Turbine Systems goals for efficiency, durability and the environment, it will be necessary to employ thermal barrier coatings on turbine airfoils and other hot section components. For The successful application of TBCs to ATS engines with 2600{degrees}F turbine inlet temperatures and required component lives 10 times greater than those for aircraft gas turbine engines, it is necessary to develop quantitative assessment techniques for TBC coating integrity with time and cycles in ATS engines. Thermal barrier coatings in production today consist of a metallic bond coat, such as an MCrAlY overlay coating or a platinum aluminide (Pt-Al) diffusion coating. During heat treatment, both these coatings form a thin, tightly adherent alumina (Al{sub 2}O{sub 3}) film. Failure of TBC coatings in engine service occurs by spallation of the ceramic coating at or near the bond coat to alumina or the alumina to zirconia bonds. Thus, it is the initial strength of these bonds and the stresses at the bond plane, and their changes with engine exposure, that determines coating durability. The purpose of this program is to provide, for the first time, a quantitative assessment of TBC bond strength and bond plane stresses as a function of engine time and cycles.

Line roughness improvements on self-aligned quadruple patterning by wafer stress engineering

Science.gov (United States)

Liu, Eric; Ko, Akiteru; Biolsi, Peter; Chae, Soo Doo; Hsieh, Chia-Yun; Kagaya, Munehito; Lee, Choongman; Moriya, Tsuyoshi; Tsujikawa, Shimpei; Suzuki, Yusuke; Okubo, Kazuya; Imai, Kiyotaka

2018-04-01

In integrated circuit and memory devices, size shrinkage has been the most effective method to reduce production cost and enable the steady increment of the number of transistors per unit area over the past few decades. In order to reduce the die size and feature size, it is necessary to minimize pattern formation in the advance node development. In the node of sub-10nm, extreme ultra violet lithography (EUV) and multi-patterning solutions based on 193nm immersionlithography are the two most common options to achieve the size requirement. In such small features of line and space pattern, line width roughness (LWR) and line edge roughness (LER) contribute significant amount of process variation that impacts both physical and electrical performances. In this paper, we focus on optimizing the line roughness performance by using wafer stress engineering on 30nm pitch line and space pattern. This pattern is generated by a self-aligned quadruple patterning (SAQP) technique for the potential application of fin formation. Our investigation starts by comparing film materials and stress levels in various processing steps and material selection on SAQP integration scheme. From the cross-matrix comparison, we are able to determine the best stack of film selection and stress combination in order to achieve the lowest line roughness performance while obtaining pattern validity after fin etch. This stack is also used to study the step-by-step line roughness performance from SAQP to fin etch. Finally, we will show a successful patterning of 30nm pitch line and space pattern SAQP scheme with 1nm line roughness performance.

Parenting stress, coping strategies and risk assessment in mothers from at-risk families assisted by Child and Family Protection Services

Directory of Open Access Journals (Sweden)

Javier Pérez Padilla

2014-03-01

Full Text Available In this study parenting stress and coping strategies in a sample of 109 mothers from at-risk families were analyzed. Results obtained show over half of these women experienced clinical levels of parenting stress, and problem focused coping strategies were the most commonly used. Moreover, the main characteristics of these families and their trajectories in Child and Family Protection Services were correlated with parenting stress and coping strategies. The global valuation of family risk informed by professionals was significantly related to parenting stress.

Lipid peroxidation, occupational stress and aging in workers of a prehospital emergency service.

Science.gov (United States)

Casado, Angela; De Lucas, Nieves; López-Fernández, Encarnación; Sánchez, Alberto; Jimenez, José-Antonio

2006-06-01

Stressful conditions lead to formation of excessive free radicals, and lipid peroxidation is one of the major outcomes of free radical-mediated injury that directly damages membranes and generates a number of secondary products. To determine the levels of malondialdehyde, an end product of lipid peroxidation, according to demographic and occupational variables in workers of a prehospital emergency service and to analyse the relationship between malondialdehyde levels and burnout. One hundred and eleven healthy workers of a prehospital emergency service and eighty aged-matched healthy individuals of both sexes as a control group were surveyed. Malondialdehyde levels were measured by the Bull and Marnett method. To measure burnout, the Maslach Burnout Inventory was used. Professional category is associated with lipid peroxidation and burnout levels (Malondialdehyde levels were: physicians 338.10+/-14.47, nurses 329.17+/-12.62 and technicians 296.74+/-14.28; burnout levels were: physicians 41.29+/-3.59, nurses 37.38+/-6.05 and technicians 35.33+/-5.87). Working at night and in the evening increased malondialdehyde and burnout levels. Malondialdehyde levels increase with age. No significant variations with respect to sex were detected. Significant variations in malondialdehyde levels were detected between singles (303.13+/-12.74) and married people (344.43+/-13.43) but not with respect to divorcees (326.44+/-11.74). Significant differences were detected in erythrocyte malondialdehyde levels between smokers (341.37+/-17.09) and nonsmokers (302.21+/-12.38), but not for alcohol consumption. These findings suggest a positive correlation between malondialdehyde, a biomarker of lipid peroxidation and occupational stress, as estimated by elements of the Maslach Burnout Inventory, and oxidative stress.

Software Engineering Guidebook

Science.gov (United States)

Connell, John; Wenneson, Greg

1993-01-01

The Software Engineering Guidebook describes SEPG (Software Engineering Process Group) supported processes and techniques for engineering quality software in NASA environments. Three process models are supported: structured, object-oriented, and evolutionary rapid-prototyping. The guidebook covers software life-cycles, engineering, assurance, and configuration management. The guidebook is written for managers and engineers who manage, develop, enhance, and/or maintain software under the Computer Software Services Contract.

An evaluation of back stress determination techniques in metals

International Nuclear Information System (INIS)

Jones, W.B.; Rohde, R.W.

1983-01-01

The desire to develop unified creep-plasticity (UCP) models come from the necessity to design advanced nuclear reactor components for service under conditions which include combined creep and low cycle fatigue. These models should also be physically based since they would be used to extrapolate from laboratory data to predict long service lives. An approach to UCP modelling centers on the hypothesis that the inelastic strain rate is determined by a balance between the competing processes of work hardening and recovery. One class of UCP models is characterized by a power law relationship between strain rate and stress. A state variable common to these models characterizes the isotropic hardening and is allowed to evolve with history according to simultaneous work hardening and recovery. In order to treat behaviours unique to unloading or reverse loading conditions, several models also include a kinematic hardening variable which is also allowed to evolve according to a balance of work hardening and recovery. Such a treatment of inelastic deformation can mathematically treat a wide variety of behaviors. The measured response of 316SS and A800 indicates that the kinematic variable must, in steady state, be taken as a constant fraction (about 0.8) of the applied stress. This experimental result makes it impossible for the simple power law type expression to properly predict the commonly observed power law breakdown behavior in most metals and alloys. It is proposed that an expression for total inelastic strain rate involving the sum of two separate strain rate contributions is more appropriate. Acknowledging that separate expressions and separate mechanisms dominate low stress (engineering service) conditions and high stress (laboratory test) conditions requires that more emphasis be placed on long time, low stress laboratory testing. (orig.)

Eddy current spectroscopy for near-surface residual stress profiling in surface treated nonmagnetic engine alloys

Science.gov (United States)

Abu-Nabah, Bassam A.

Recent research results indicated that eddy current conductivity measurements can be exploited for nondestructive evaluation of near-surface residual stresses in surface-treated nickel-base superalloy components. Most of the previous experimental studies were conducted on highly peened (Almen 10-16A) specimens that exhibit harmful cold work in excess of 30% plastic strain. Such high level of cold work causes thermo-mechanical relaxation at relatively modest operational temperatures; therefore the obtained results were not directly relevant to engine manufacturers and end users. The main reason for choosing peening intensities in excess of recommended normal levels was that in low-conductivity engine alloys the eddy current penetration depth could not be forced below 0.2 mm without expanding the measurements above 10 MHz which is beyond the operational range of most commercial eddy current instruments. As for shot-peened components, it was initially felt that the residual stress effect was more difficult to separate from cold work, texture, and inhomogeneity effects in titanium alloys than in nickel-base superalloys. In addition, titanium alloys have almost 50% lower electric conductivity than nickel-base superalloys; therefore require proportionally higher inspection frequencies, which was not feasible until our recent breakthrough in instrument development. Our work has been focused on six main aspects of this continuing research, namely, (i) the development of an iterative inversion technique to better retrieve the depth-dependent conductivity profile from the measured frequency-dependent apparent eddy current conductivity (AECC), (ii) the extension of the frequency range up to 80 MHz to better capture the peak compressive residual stress in nickel-base superalloys using a new eddy current conductivity measuring system, which offers better reproducibility, accuracy and measurement speed than the previously used conventional systems, (iii) the lift-off effect on

Field services experiences

International Nuclear Information System (INIS)

Colflesh, J.A.; Kruse, P.W.; Merluzzi, R.A.

1985-01-01

Combustion Engineering (C-E) is a large diversified manufacturer of products and services for the energy field. At this time, C-E has supplied the nuclear steam supply systems for eleven operating nuclear power plants with two additional units currently undergoing start-up testing. The focus of C-E's commitment in the nuclear power plant services area is the Nuclear Services organization within the Nuclear Power Systems Division. The Nuclear Services organization provides services on a timely cost efficient basis; and dedicates resources to developing new products and services which are truly responsive to the needs of operating power plants world wide. In the paper, C-E's capabilities and experience in the field of nuclear services are described. Highlighted are our capabilities in the areas of transition management services, operating services and engineering services

Engine Tune-Up Service. Unit 1: Battery and Cranking System. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Goodson-Roberts, Ludy; And Others

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 1, Battery and Cranking System. Focus of the exercises and pretests is testing the battery and cranking system. Pretests and performance checklists are provided for each of the four performance objectives contained in the unit.…

Organizational stress and individual strain: A social-psychological study of risk factors in coronary heart disease among administrators, engineers, and scientists

Science.gov (United States)

Caplan, R. D.

1971-01-01

It is hypothesized that organizational stresses, such as high quantitative work load, responsibility for persons, poor relations with role senders, and contact with alien organizational territories, may be associated with high levels of psychological and physiological strain which are risk factors in coronary heart disease. It is further hypothesized that persons with coronary-prone Type A personality characteristics are most likely to exhibit strain under conditions of organizational stress. Measures of these stresses, personality traits, and strains were obtained from 205 male NASA administrators, engineers, and scientists. Type A personality measures included sense of time urgency, persistence, involved striving, leadership, and preference for competitive and environmentally overburdening situations.

Pathogenesis-related proteins and peptides as promising tools for engineering plants with multiple stress tolerance.

Science.gov (United States)

Ali, Sajad; Ganai, Bashir Ahmad; Kamili, Azra N; Bhat, Ajaz Ali; Mir, Zahoor Ahmad; Bhat, Javaid Akhter; Tyagi, Anshika; Islam, Sheikh Tajamul; Mushtaq, Muntazir; Yadav, Prashant; Rawat, Sandhya; Grover, Anita

Pathogenesis-related (PR) proteins and antimicrobial peptides (AMPs) are a group of diverse molecules that are induced by phytopathogens as well as defense related signaling molecules. They are the key components of plant innate immune system especially systemic acquired resistance (SAR), and are widely used as diagnostic molecular markers of defense signaling pathways. Although, PR proteins and peptides have been isolated much before but their biological function remains largely enigmatic despite the availability of new scientific tools. The earlier studies have demonstrated that PR genes provide enhanced resistance against both biotic and abiotic stresses, which make them one of the most promising candidates for developing multiple stress tolerant crop varieties. In this regard, plant genetic engineering technology is widely accepted as one of the most fascinating approach to develop the disease resistant transgenic crops using different antimicrobial genes like PR genes. Overexpression of PR genes (chitinase, glucanase, thaumatin, defensin and thionin) individually or in combination have greatly uplifted the level of defense response in plants against a wide range of pathogens. However, the detailed knowledge of signaling pathways that regulates the expression of these versatile proteins is critical for improving crop plants to multiple stresses, which is the future theme of plant stress biology. Hence, this review provides an overall overview on the PR proteins like their classification, role in multiple stresses (biotic and abiotic) as well as in various plant defense signaling cascades. We also highlight the success and snags of transgenic plants expressing PR proteins and peptides. Copyright © 2018 Elsevier GmbH. All rights reserved.

Paired peer learning through engineering education outreach

Science.gov (United States)

Fogg-Rogers, Laura; Lewis, Fay; Edmonds, Juliet

2017-01-01

Undergraduate education incorporating active learning and vicarious experience through education outreach presents a critical opportunity to influence future engineering teaching and practice capabilities. Engineering education outreach activities have been shown to have multiple benefits; increasing interest and engagement with science and engineering for school children, providing teachers with expert contributions to engineering subject knowledge, and developing professional generic skills for engineers such as communication and teamwork. This pilot intervention paired 10 pre-service teachers and 11 student engineers to enact engineering outreach in primary schools, reaching 269 children. A longitudinal mixed methods design was employed to measure change in attitudes and Education Outreach Self-Efficacy in student engineers; alongside attitudes, Teaching Engineering Self-Efficacy and Engineering Subject Knowledge Confidence in pre-service teachers. Highly significant improvements were noted in the pre-service teachers' confidence and self-efficacy, while both the teachers and engineers qualitatively described benefits arising from the paired peer mentor model.

Supporting interoperability of collaborative networks through engineering of a service-based Mediation Information System (MISE 2.0)

Science.gov (United States)

Benaben, Frederick; Mu, Wenxin; Boissel-Dallier, Nicolas; Barthe-Delanoe, Anne-Marie; Zribi, Sarah; Pingaud, Herve

2015-08-01

The Mediation Information System Engineering project is currently finishing its second iteration (MISE 2.0). The main objective of this scientific project is to provide any emerging collaborative situation with methods and tools to deploy a Mediation Information System (MIS). MISE 2.0 aims at defining and designing a service-based platform, dedicated to initiating and supporting the interoperability of collaborative situations among potential partners. This MISE 2.0 platform implements a model-driven engineering approach to the design of a service-oriented MIS dedicated to supporting the collaborative situation. This approach is structured in three layers, each providing their own key innovative points: (i) the gathering of individual and collaborative knowledge to provide appropriate collaborative business behaviour (key point: knowledge management, including semantics, exploitation and capitalisation), (ii) deployment of a mediation information system able to computerise the previously deduced collaborative processes (key point: the automatic generation of collaborative workflows, including connection with existing devices or services) (iii) the management of the agility of the obtained collaborative network of organisations (key point: supervision of collaborative situations and relevant exploitation of the gathered data). MISE covers business issues (through BPM), technical issues (through an SOA) and agility issues of collaborative situations (through EDA).

Probabilistic analysis of structures involving random stress-strain behavior

Science.gov (United States)

Millwater, H. R.; Thacker, B. H.; Harren, S. V.

1991-01-01

The present methodology for analysis of structures with random stress strain behavior characterizes the uniaxial stress-strain curve in terms of (1) elastic modulus, (2) engineering stress at initial yield, (3) initial plastic-hardening slope, (4) engineering stress at point of ultimate load, and (5) engineering strain at point of ultimate load. The methodology is incorporated into the Numerical Evaluation of Stochastic Structures Under Stress code for probabilistic structural analysis. The illustrative problem of a thick cylinder under internal pressure, where both the internal pressure and the stress-strain curve are random, is addressed by means of the code. The response value is the cumulative distribution function of the equivalent plastic strain at the inner radius.

Statement of work for architect-engineer services, initial pretreatment module

International Nuclear Information System (INIS)

Sowa, K.B.

1994-01-01

This Statement of Work describes the Architect-Engineer services to be provided by Raytheon/BNFL in providing a conceptual design (Contract TGW-SVV-063869) for the Initial Pretreatment Module (IPM), Project W-236B, at the Hanford site, Richland, Washington. The IPM Project, a radiochemical process facility, will be designed and constructed for an initial phase of waste pretreatment, which will be for the removal of cesium from supernatant wastes to produce a Low-level waste (LLW) stream to a vitrification facility. The design shall also accommodate side streams of High-Level Waste (HLW) fractions that will be directed to suitable, existing storage tanks where they will be recombined with an additional high-activity waste fraction generated from pretreatment of the tank waste sludges and solids. This combined high-activity waste fraction will be immobilized as glass and disposed in a geological repository

ANALYSIS OF EFFECTIVENESS OF METHODOLOGICAL SYSTEM FOR PROBABILITY AND STOCHASTIC PROCESSES COMPUTER-BASED LEARNING FOR PRE-SERVICE ENGINEERS

Directory of Open Access Journals (Sweden)

E. Chumak

2015-04-01

Full Text Available The author substantiates that only methodological training systems of mathematical disciplines with implementation of information and communication technologies (ICT can meet the requirements of modern educational paradigm and make possible to increase the educational efficiency. Due to this fact, the necessity of developing the methodology of theory of probability and stochastic processes computer-based learning for pre-service engineers is underlined in the paper. The results of the experimental study for analysis of the efficiency of methodological system of theory of probability and stochastic processes computer-based learning for pre-service engineers are shown. The analysis includes three main stages: ascertaining, searching and forming. The key criteria of the efficiency of designed methodological system are the level of probabilistic and stochastic skills of students and their learning motivation. The effect of implementing the methodological system of probability theory and stochastic processes computer-based learning on the level of students’ IT literacy is shown in the paper. The expanding of the range of objectives of ICT applying by students is described by author. The level of formation of students’ learning motivation on the ascertaining and forming stages of the experiment is analyzed. The level of intrinsic learning motivation for pre-service engineers is defined on these stages of the experiment. For this purpose, the methodology of testing the students’ learning motivation in the chosen specialty is presented in the paper. The increasing of intrinsic learning motivation of the experimental group students (E group against the control group students (C group is demonstrated.

Power reactor services provided by the Penn State Radiation Science and Engineering Center

International Nuclear Information System (INIS)

Voth, M.H.; Jester, W.A.

1993-01-01

The power reactor industry emerged from extensive research and development performed at nonpower reactors (NPRs). As the industry matures, NPRs continue to support and enhance power reactor technology. With the closure of many government and private industry NPRS, there is an increasing call for the 33 universities with operating research reactors to provide the needed services. The Penn State Radiation Science and Engineering Center (RSEC) includes a 1-MW pool-type pulsing TRIGA reactor, a neutron beam laboratory with real-time neutron radiography equipment, hot cells with master-slave manipulators for remote handling of radioactive materials, a gamma-ray irradiation pool, a low-level radiation monitoring laboratory, and extensive equipment for radiation monitoring, dosimetry, and material properties determination. While equipment is heavily utilized in the instructional and academic research programs, significant time remains available for service work. Cost recovery for service work generates income for personnel, equipment maintenance, and facility improvements. With decreasing federal and state funding for educational programs, it is increasingly important that facilities be fully utilized to generate supplementary revenue. The following are examples of such work performed at the RSEC

Engineering Synechocystis PCC6803 for hydrogen production: influence on the tolerance to oxidative and sugar stresses.

Directory of Open Access Journals (Sweden)

Marcia Ortega-Ramos

Full Text Available In the prospect of engineering cyanobacteria for the biological photoproduction of hydrogen, we have studied the hydrogen production machine in the model unicellular strain Synechocystis PCC6803 through gene deletion, and overexpression (constitutive or controlled by the growth temperature. We demonstrate that the hydrogenase-encoding hoxEFUYH operon is dispensable to standard photoautotrophic growth in absence of stress, and it operates in cell defense against oxidative (H₂O₂ and sugar (glucose and glycerol stresses. Furthermore, we showed that the simultaneous over-production of the proteins HoxEFUYH and HypABCDE (assembly of hydrogenase, combined to an increase in nickel availability, led to an approximately 20-fold increase in the level of active hydrogenase. These novel results and mutants have major implications for those interested in hydrogenase, hydrogen production and redox metabolism, and their connections with environmental conditions.

Service engineers in change: count your words : A case study into professional discourse and culture within three Dutch organizations

NARCIS (Netherlands)

Drs Jos Pieterse

2014-01-01

This doctoral thesis describes three case studies of service engineers participating in organizational change, interacting with managers and consultants. The study investigates the role of differences in professional discourse and culture when these three professional groups interact in

A comparison between Engin and Engin-X, a new diffractometer optimized for stress measurement

International Nuclear Information System (INIS)

Dann, J.A.; Daymond, M.R.; Edwards, L.; James, J.A.; Santisteban, J.R.

2004-01-01

Engineering diffractometers are used extensively by both engineers and materials scientists for the measurement of strain within polycrystalline materials, both metallic and ceramic. In the past neutron diffractometers have generally been built as 'all-purpose' instruments, with designs that are compromises, balancing competing requirements to measure the intensities, positions and widths of diffraction peaks simultaneously. In contrast the newly constructed diffractometer ENGIN-X was designed with the single aim of making engineering strain measurements; essentially the accurate measurement of polycrystalline lattice parameters, at a precisely determined position. Under this design philosophy, considerable performance improvements have been obtained compared to the existing instrument. This paper details the design philosophy of this instrument, including tuneable incident resolution, together with the approaches used to realise the performance required. The improved instrument performance is demonstrated here, with results obtained during the commissioning of ENGIN-X. These results include strain mapping experiments, and demonstrate the influence of resolution on required count times, and provide a direct comparison with measurements from the existing ENGIN instrument at ISIS

Development of in-service inspection system for core support graphite structures in the high temperature engineering test reactor (HTTR)

Energy Technology Data Exchange (ETDEWEB)

Sumita, Junya; Hanawa, Satoshi; Kikuchi, Takayuki; Ishihara, Masahiro [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment

2003-03-01

Visual inspection of core support graphite structures using TV camera as in-service inspection and measurement of material characteristics using surveillance test specimens are planned in the High Temperature Engineering Test Reactor (HTTR) to confirm structural integrity of the core support graphite structures. For the visual inspection, in-service inspection system developed from September 1996 to June 1998, and pre-service inspection using the system was carried out. As the result of the pre-service inspection, it was validated that high quality of visual inspection with TV camera can be carried out, and also structural integrity of the core support graphite structures at the initial stage of the HTTR operation was confirmed. (author)

Transfer and Reuse of Knowledge from the Service Phase of Complex Products

DEFF Research Database (Denmark)

Vianello, Giovanna

industry. Knowledge generated during the service phase was analysed from the point of view of service engineers and engineering designers. Furthermore, the mechanisms involved in the transfer of knowledge within the service phase and between service and design were investigated. Both service engineers....... The study showed that knowledge transfer between the service and design departments was not systematic and consisted primarily of knowledge pushed by service engineers to engineering designers. The issues that posed a barrier to a systematic reuse of service knowledge were taken into consideration whilst...... and engineering designers were interested in knowledge about changes, issues and improvements generated during service; however, engineering designers were more orientated towards knowledge of the equipment at a component level while service engineers were interested in obtaining an overview of the systems...

An Empirical Investigation into the Construct of Higher Education Service Quality

Directory of Open Access Journals (Sweden)

Jaroslav Dado

2011-01-01

Full Text Available The paper addresses the issue of higher education service quality measurement and stresses the need of devising psychometrically as well as diagnostically sound measurement instruments, suitable to the context being investigated. The study builds upon the SERVQUAL scale, the inventory successfully tried and tested across a broad spectrum of service industries. Notwithstanding significant resemblance with the original five dimensions of service quality, research findings indicate six-dimensional structure of the construct of higher education service quality. Study performed on a sample of Engineering Management students reveals perceptions falling short of expectations across all of the determinants of service quality. The largest negative gap between students’ perceptions and expectations has been discovered concerning the potential for future career development, whereas research findings indicate the same dimension to be the most important predictor of students’ future behavioral intentions. In an attempt to inspire further interests in this field, managerial implications and directions for future research have been discussed.

Risk Analysis in Civil Engineering

DEFF Research Database (Denmark)

Thoft-Christensen, Palle

Until fairly recently there has been a tendency for structural engineering to be dominated by deterministic thinking, characterised in design calculations by the use of specified minimum material properties, specified load intensities and by prescribed procedures for computing stresses and deflec......Until fairly recently there has been a tendency for structural engineering to be dominated by deterministic thinking, characterised in design calculations by the use of specified minimum material properties, specified load intensities and by prescribed procedures for computing stresses...

The impact of employee level and work stress on mental health and GP service use: an analysis of a sample of Australian government employees

Directory of Open Access Journals (Sweden)

Strazdins Lyndall

2004-09-01

Full Text Available Abstract Background This study sought to identify the extent to which employee level and work stressors were associated with mental health problems experienced by Australian government employees, and with their use of primary care services. Methods 806 government employees aged between 40 and 44 years were surveyed as part of an epidemiological study conducted in Australia. Data collected from participants included sociodemographic attributes, physical health, psychological measures and work stressors relating to job control, job demands, job security and skills discretion at work. For 88% of these participants, information on visits made to general practitioners (GPs for the six months before and after their survey interview was obtained from health insurance records. Results When work stress and personal factors were taken into account, men at more junior levels reported better mental health, more positive affect and used fewer GP services. Women at middle-management levels obtained less GP care than their more senior counterparts. Both men and women who reported higher levels of work stress were found to have poorer mental health and well-being. The impact of such stressors on GP service use, however, differed for men and women. Conclusion Measures of work stress and not employee level affect the mental health and well-being of government employees. For governments with responsibility for funding health care services, reducing work stress experienced by their own employees offers potential benefits by improving the health of their workforce and reducing outlays for such services.

The impact of employee level and work stress on mental health and GP service use: an analysis of a sample of Australian government employees.

Science.gov (United States)

Parslow, Ruth A; Jorm, Anthony F; Christensen, Helen; Broom, Dorothy H; Strazdins, Lyndall; D' Souza, Rennie M

2004-09-30

This study sought to identify the extent to which employee level and work stressors were associated with mental health problems experienced by Australian government employees, and with their use of primary care services. 806 government employees aged between 40 and 44 years were surveyed as part of an epidemiological study conducted in Australia. Data collected from participants included sociodemographic attributes, physical health, psychological measures and work stressors relating to job control, job demands, job security and skills discretion at work. For 88% of these participants, information on visits made to general practitioners (GPs) for the six months before and after their survey interview was obtained from health insurance records. When work stress and personal factors were taken into account, men at more junior levels reported better mental health, more positive affect and used fewer GP services. Women at middle-management levels obtained less GP care than their more senior counterparts. Both men and women who reported higher levels of work stress were found to have poorer mental health and well-being. The impact of such stressors on GP service use, however, differed for men and women. Measures of work stress and not employee level affect the mental health and well-being of government employees. For governments with responsibility for funding health care services, reducing work stress experienced by their own employees offers potential benefits by improving the health of their workforce and reducing outlays for such services.

Manipulating environmental stresses and stress tolerance of microalgae for enhanced production of lipids and value-added products-A review.

Science.gov (United States)

Chen, Bailing; Wan, Chun; Mehmood, Muhammad Aamer; Chang, Jo-Shu; Bai, Fengwu; Zhao, Xinqing

2017-11-01

Microalgae have promising potential to produce lipids and a variety of high-value chemicals. Suitable stress conditions such as nitrogen starvation and high salinity could stimulate synthesis and accumulation of lipids and high-value products by microalgae, therefore, various stress-modification strategies were developed to manipulate and optimize cultivation processes to enhance bioproduction efficiency. On the other hand, advancements in omics-based technologies have boosted the research to globally understand microalgal gene regulation under stress conditions, which enable further improvement of production efficiency via genetic engineering. Moreover, integration of multi-omics data, synthetic biology design, and genetic engineering manipulations exhibits a tremendous potential in the betterment of microalgal biorefinery. This review discusses the process manipulation strategies and omics studies on understanding the regulation of metabolite biosynthesis under various stressful conditions, and proposes genetic engineering of microalgae to improve bioproduction via manipulating stress tolerance. Copyright © 2017 Elsevier Ltd. All rights reserved.

Neutrons and Nuclear Engineering

International Nuclear Information System (INIS)

Ekkebus, Allen E.

2007-01-01

Oak Ridge National Laboratory hosted two workshops in April 2007 relevant to nuclear engineering education. In the Neutron Stress, Texture, and Phase Transformation for Industry workshop (http://neutrons.ornl.gov/workshops/nst2/), several invited speakers gave examples of neutron stress mapping for nuclear engineering applications. These included John Root of National Research Council of Canada, Mike Fitzpatrick of the UK's Open University, and Yan Gao of GE Global Research on their experiences with industrial and academic uses of neutron diffraction. Xun-Li Wang and Camden Hubbard described the new instruments at ORNL that can be used for such studies. This was preceded by the Neutrons for Materials Science and Engineering educational symposium (http://neutrons.ornl.gov/workshops/edsym2007). It was directed to the broad materials science and engineering community based in universities, industry and laboratories who wish to learn what the neutron sources in the US can provide for enhancing the understanding of materials behavior, processing and joining. Of particular interest was the presentation of Donald Brown of Los Alamos about using 'Neutron diffraction measurements of strain and texture to study mechanical behavior of structural materials.' At both workshops, the ORNL neutron scattering instruments relevant to nuclear engineering studies were described. The Neutron Residual Stress Mapping Facility (NRSF2) is currently in operation at the High Flux Isotope Reactor; the VULCAN Engineering Materials Diffractometer will begin commissioning in 2008 at the Spallation Neutron Source. For characteristics of these instruments, as well as details of other workshops, meetings, capabilities, and research proposal submissions, please visit http://neutrons.ornl.gov. To submit user proposals for time on NRSF2 contact Hubbard at hubbardcratornl.gov

A model for reusing service knowledge based on an empirical case

DEFF Research Database (Denmark)

Ahmed-Kristensen, Saeema; Vianello, Giovanna

2015-01-01

between the service and design phases. Interviews with engineering designers and service engineers were conducted. Knowledge arising from servicing the drilling equipment that was identified as relevant for service engineers was compared to that relevant for engineering designers. Furthermore......, the mechanisms involved in the transfer of knowledge between service and design were investigated. Knowledge about changes, issues and improvements generated during service was found to be relevant to both groups; however, engineering designers were interested in knowledge of equipment at a component level...

Software Service Engineering : Tenets and Challenges

NARCIS (Netherlands)

Heuvel, Willem-Jan van den; Zimmermann, Olaf; Leymann, Frank; Lago, Patricia; Schieferdecker, Ina; Zdun, Uwe; Avgeriou, Paris

2009-01-01

Service-Oriented Architecture (SOA) constitutes a modern, standards-based and technology-independent paradigm and architectural style for distributed enterprise computing. The SOA style promotes the publishing, discovery, and binding of loosely-coupled, network-accessible software services. With SOA

"The Invisible Staff": A Qualitative Analysis of Environmental Service Workers' Perceptions of the VA Clostridium difficile Prevention Bundle Using a Human Factors Engineering Approach.

Science.gov (United States)

Yanke, Eric; Moriarty, Helene; Carayon, Pascale; Safdar, Nasia

2018-06-11

Using a novel human factors engineering approach, the Systems Engineering Initiative for Patient Safety model, we evaluated environmental service workers' (ESWs) perceptions of barriers and facilitators influencing adherence to the nationally mandated Department of Veterans Affairs Clostridium difficile infection (CDI) prevention bundle. A focus group of ESWs was conducted. Qualitative analysis was performed employing a visual matrix display to identify barrier/facilitator themes related to Department of Veterans Affairs CDI bundle adherence using the Systems Engineering Initiative for Patient Safety work system as a framework. Environmental service workers reported adequate cleaning supplies/equipment and displayed excellent knowledge of CDI hand hygiene requirements. Environmental service workers described current supervisory practices as providing an acceptable amount of time to clean CDI rooms, although other healthcare workers often pressured ESWs to clean rooms more quickly. Environmental service workers reported significant concern for CDI patients' family members as well as suggesting uncertainty regarding the need for family members to follow infection prevention practices. Small and cluttered patient rooms made cleaning tasks more difficult, and ESW cleaning tasks were often interrupted by other healthcare workers. Environmental service workers did not feel comfortable asking physicians for more time to finish cleaning a room nor did ESWs feel comfortable pointing out lapses in physician hand hygiene. Multiple work system components serve as barriers to and facilitators of ESW adherence to the nationally mandated Department of Veterans Affairs CDI bundle. Environmental service workers may represent an underappreciated resource for hospital infection prevention, and further efforts should be made to engage ESWs as members of the health care team.

Residual Stresses in a NiCrY-Coated Powder Metallurgy Disk Superalloy

Science.gov (United States)

Gabb, Timothy P.; Rogers, Richard B.; Nesbitt, James A.; Puleo, Bernadette J.; Miller, Robert A.; Telesman, Ignacy; Draper, Susan L.; Locci, Ivan E.

2017-01-01

Protective ductile coatings will be necessary to mitigate oxidation and corrosion attack on superalloy disks exposed to increasing operating temperatures in some turbine engine environments. However, such coatings must be resistant to harmful surface cracking during service. The objective of this study was to investigate how residual stresses evolve in such coatings. Cylindrical gage fatigue specimens of powder metallurgy-processed disk superalloy LSHR were coated with a NiCrY coating, shot peened, and then subjected to fatigue in air at room and high temperatures. The effects of shot peening and fatigue cycling on average residual stresses and other aspects of the coating were assessed. Shot peening did induce beneficial compressive residual stresses in the coating and substrate. However, these stresses became more tensile in the coating with subsequent heating and contributed to cracking of the coating in long intervals of cycling at 760 C. Substantial compressive residual stresses remained in the substrate adjacent to the coating, sufficient to suppress fatigue cracking. The coating continued to protect the substrate from hot corrosion pitting, even after fatigue cracks initiated in the coating.

Stress analysis of piping systems and piping supports. Documentation

International Nuclear Information System (INIS)

Rusitschka, Erwin

1999-01-01

The presentation is focused on the Computer Aided Tools and Methods used by Siemens/KWU in the engineering activities for Nuclear Power Plant Design and Service. In the multi-disciplinary environment, KWU has developed specific tools to support As-Built Documentation as well as Service Activities. A special application based on Close Range Photogrammetry (PHOCAS) has been developed to support revamp planning even in a high level radiation environment. It comprises three completely inter-compatible expansion modules - Photo Catalog, Photo Database and 3D-Model - to generate objects which offer progressively more utilization and analysis options. To support the outage planning of NPP/CAD-based tools have been developed. The presentation gives also an overview of the broad range of skills and references in: Plant Layout and Design using 3D-CAD-Tools; evaluation of Earthquake Safety (Seismic Screening); Revamps in Existing Plants; Inter-disciplinary coordination of project engineering and execution fields; Consulting and Assistance; Conceptual Studies; Stress Analysis of Piping Systems and Piping Supports; Documentation; Training and Supports in CAD-Design, etc. All activities are performed to the greatest extent possible using proven data-processing tools. (author)

Sound Search Engine Concept

DEFF Research Database (Denmark)

2006-01-01

Sound search is provided by the major search engines, however, indexing is text based, not sound based. We will establish a dedicated sound search services with based on sound feature indexing. The current demo shows the concept of the sound search engine. The first engine will be realased June...

Compressive residual stresses as a preventive measure against stress corrosion cracking on turbine components

International Nuclear Information System (INIS)

Berger, C.; Ewald, J.; Fischer, K.; Gruendler, O.; Potthast, E.; Stuecker, E.; Winzen, G.

1987-01-01

Disk type low pressure turbine rotors have been designed for a large variety of power plant applications. Developing disk type rotors required a concerted effort to design a shaft/disk shrink fit with a minimum of tensile stress concentrations in order to aim for the lowest possible susceptibility to corrosive attack, i.e. stress corrosion cracking. As a result of stresses, the regions of greatest concern are the shrink fit boundaries and the keyways of turbine disks. These stresses are caused by service loading, i.e. centrifugal and shrinkage stresses and by manufacturing procedure, i.e. residual stresses. The compressive residual stresses partly compensate the tensile service stresses so that an increase of compressive residual stresses decreases the whole stress state of the component. Special manufacturing procedures, e.g. accelerated cooling after tempering can induce compressive residual stresses up to about 400 MPa in the hub bore region of turbine disk

Central Laboratories Services

Data.gov (United States)

Federal Laboratory Consortium — The TVA Central Laboratories Services is a comprehensive technical support center, offering you a complete range of scientific, engineering, and technical services....

47 CFR 73.333 - Engineering charts.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Engineering charts. 73.333 Section 73.333 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES FM Broadcast Stations § 73.333 Engineering charts. This section consists of the following Figures 1, 1a, 2, and...

How Are Service Dogs for Adults with Post Traumatic Stress Disorder Integrated with Rehabilitation in Denmark? A Case Study

OpenAIRE

Glintborg, Chalotte; Hansen, Tia G. B.

2017-01-01

Simple Summary The use of service dogs for adults with mental illnesses has become generally accepted. With reference to a single case study of a client with Post Traumatic Stress (PTSD), this study illustrates some of the potential advantages, but also note an important concern that appears to have gone unnoticed. The provision of service animals/therapy animals for adults with mental illnesses must be sufficiently informed by relevant knowledge and integrated with concurrent rehabilitation ...

High voltage engineering

CERN Document Server

Rizk, Farouk AM

2014-01-01

Inspired by a new revival of worldwide interest in extra-high-voltage (EHV) and ultra-high-voltage (UHV) transmission, High Voltage Engineering merges the latest research with the extensive experience of the best in the field to deliver a comprehensive treatment of electrical insulation systems for the next generation of utility engineers and electric power professionals. The book offers extensive coverage of the physical basis of high-voltage engineering, from insulation stress and strength to lightning attachment and protection and beyond. Presenting information critical to the design, selec

Mental health nurses' and allied health professionals' perceptions of the role of the Occupational Health Service in the management of work-related stress: how do they self-care?

Science.gov (United States)

Gibb, J; Cameron, I M; Hamilton, R; Murphy, E; Naji, S

2010-11-01

Higher rates of stress-related sickness are found in health care professionals when compared with other sectors. The annual direct cost of absence to the National Health Service is £1.7 billion. Increased clinical demand, long hours, low staffing and a lack of support from colleagues and management are contributing to absenteeism, somatic complaints and mental health problems. Mental health work is inherently stressful and levels of work stress experienced by mental health nurses are especially high. The study investigated mental health nurses' and allied health professionals' (AHPs) awareness and knowledge of the service provided by the Occupational Health Service (OHS) and identified work-related stress and self-care strategies within these two groups. Nurses and AHP staff employed in mental health services in a Scottish healthboard area were invited to complete an anonymous questionnaire. Results demonstrated that staff found their contact with the OHS to be a positive experience. They considered direct patient care to be less stressful than the organizational constraints they work under, and they reported a lack of support from both their peer groups and management. There should be recognition of the increased stress that hospital-based nurses and AHPs experience. These areas should be scrutinized and reviewed further to support staff within these environments in accordance with organizational objectives. © 2010 Blackwell Publishing.

Gap analysis methodology for business service engineering

NARCIS (Netherlands)

Nguyen, D.K.; van den Heuvel, W.J.A.M.; Papazoglou, M.; de Castro, V.; Marcos, E.; Hofreiter, B.; Werthner, H.

2009-01-01

Many of today’s service analysis and design techniques rely on ad-hoc and experience-based identification of value-creating business services and implicitly assume a “green-field” situation focusing on the development of completely new services while offering very limited support for discovering

Business service modeling for the service-oriented enterprise

NARCIS (Netherlands)

Jayasinghe Arachchig, J.; Weigand, H.; Jeusfeld, M.A.

2012-01-01

Service-oriented architectures are the upcoming business standard for realizing enterprise information systems, thus creating a need for analysis and design methods that are truly service-oriented. Most research on this topic so far takes a strict software engineering perspective. For a proper

Cummins Engine Company B5.9 Propane Engine Development, Certification, and Demonstration Project

Energy Technology Data Exchange (ETDEWEB)

The ADEPT Group, Inc. (Los Angeles, California)

1998-12-18

The objective of this project was to successfuly develop and certify an LPG-dedicated medium-duty original equipment manufacturer (OEM) engine that could be put into production. The engine was launched into production in 1994, and more than 800 B5.9G engines are now in service in the United States and abroad. This engine is now offered by more than 30 bus and truck OEMs.

Examining the Effects of a Service-Trained Facility Dog on Stress in Children Undergoing Forensic Interview for Allegations of Child Sexual Abuse.

Science.gov (United States)

Krause-Parello, Cheryl A; Thames, Michele; Ray, Colleen M; Kolassa, John

2018-04-01

Disclosure of child sexual abuse can be a stressful experience for the child. Gaining a better understanding of how best to serve the child, while preserving the quality of their disclosure, is an ever-evolving process. The data to answer this question come from 51 children aged 4-16 (M = 9.1, SD = 3.5), who were referred to a child advocacy center in Virginia for a forensic interview (FI) following allegations of sexual abuse. A repeated measures design was conducted to examine how the presence of a service-trained facility dog (e.g. animal-assisted intervention (AAI) may serve as a mode of lowering stress levels in children during their FIs. Children were randomized to one of the two FI conditions: experimental condition (service-trained facility dog present-AAI) or control condition (service-trained facility dog not present- standard forensic interview). Stress biomarkers salivary cortisol, alpha-amylase, immunoglobulin A (IgA), heart rate, and blood pressure, and Immunoglobulin A were collected before and after the FI. Self-report data were also collected. Results supported a significant decrease in heart rate for those in the experimental condition (p = .0086) vs the control condition (p = .4986). Regression models revealed a significant decrease in systolic and diastolic blood pressure in the experimental condition (p = .03285) and (p = .04381), respectively. Statistically significant changes in alpha-amylase and IgA were also found in relation to disclosure and type of offense. The results of this study support the stress reducing effects of a service-trained facility dog for children undergoing FI for allegations of child sexual abuse.

Parenting stress and salivary cortisol in parents of children with autism spectrum disorder: Longitudinal variations in the context of a service dog's presence in the family.

Science.gov (United States)

Fecteau, Stéphanie-M; Boivin, Louise; Trudel, Marcel; Corbett, Blythe A; Harrell, Frank E; Viau, Robert; Champagne, Noël; Picard, Frédéric

2017-02-01

A significant portion of parents of children with autism spectrum disorder report high levels of stress related to parenting responsibilities, which have been linked to abnormal cortisol patterns. This study seeks to better understand the parents' adaptation to caregiving demands and use of a service dog, by taking into account longitudinal variations in salivary cortisol and perception of parental stress. Salivary cortisol was collected one day per week for 15 weeks by 98 primary caregivers of children with ASD. Overall, parents perceived high levels of stress at baseline. Mean morning cortisol increase was below expected levels for healthy adults, and perception of stress predicted morning cortisol activity. Hypocorticolism related to chronic stress may be present in parents of children with ASD. Longitudinal analysis revealed that the presence of a service dog in the family had an effect on parenting stress, wakening and morning cortisol levels. Copyright © 2016 Elsevier B.V. All rights reserved.

Medical students' subjective ratings of stress levels and awareness of student support services about mental health.

Science.gov (United States)

Walter, Garry; Soh, Nerissa Li-Wey; Norgren Jaconelli, Sanna; Lampe, Lisa; Malhi, Gin S; Hunt, Glenn

2013-06-01

To descriptively assess medical students' concerns for their mental and emotional state, perceived need to conceal mental problems, perceived level of support at university, knowledge and use of student support services, and experience of stresses of daily life. From March to September 2011, medical students at an Australian university were invited to complete an anonymous online survey. 475 responses were received. Students rated study and examinations (48.9%), financial concerns (38.1%), isolation (19.4%) and relationship concerns (19.2%) as very or extremely stressful issues. Knowledge of available support services was high, with 90.8% indicating they were aware of the university's medical centre. Treatment rates were modest (31.7%). Students' concerns about their mental state were generally low, but one in five strongly felt they needed to conceal their emotional problems. Despite widespread awareness of appropriate support services, a large proportion of students felt they needed to conceal mental and emotional problems. Overall treatment rates for students who were greatly concerned about their mental and emotional state appeared modest, and, although comparable with those of similarly aged community populations, may reflect undertreatment. It would be appropriate for universities to address stressors identified by students. Strategies for encouraging distressed students to obtain appropriate assessment and treatment should also be explored. Those students who do seek healthcare are most likely to see a primary care physician, suggesting an important screening role for these health professionals.

Da "Search engines" a "Shop engines"

OpenAIRE

Lupi, Mauro

2001-01-01

The change occuring related to “search engines” is going towards e-commerce, transforming all the main search engines into information and commercial suggestion conveying means, basing their businnes on this activity. In a next future we will find two main series of search engines: from one side, the portals that will offer a general orientation guide being convoying means for services and to-buy products; from the other side, vertical portals able to offer information and products on specifi...

48 CFR 536.602 - Selection of firms for architect-engineer contracts.

Science.gov (United States)

2010-10-01

... architect-engineer contracts. 536.602 Section 536.602 Federal Acquisition Regulations System GENERAL SERVICES ADMINISTRATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 536.602 Selection of firms for architect-engineer contracts. ...

Automotive engineering partners

Energy Technology Data Exchange (ETDEWEB)

Liebl, Johannes; Siebenpfeiffer, Wolfgang (eds.)

2012-05-15

The brochure under consideration consists of contributions to the following aspects: (1) the ATZ ranking of the Top 75 of the companies providing development service; (2) Challenges and opportunities of hybrid vehicles: (3) Localization of sound sources; (4) Sectoral index engineering services.

Enterprise 3.0 in Engineering Education

Science.gov (United States)

Ahrens, Andreas; Zascerinska, Jelena

2011-01-01

Enterprise 3.0 offers potential solutions for the quality, maintenance and sustainable development of services. The synergy between Enterprise 3.0 and engineering education advances the development of innovative products, processes and services in the European economy. Aim of the research is to analyze student engineers' use of Enterprise 3.0…

Alcohol consumption and use of health care services in people with severe mental illness and stressful childhood experiences.

Science.gov (United States)

Schneeberger, Andres R; Huber, Christian G; Seixas, Azizi; Muenzenmaier, Kristina H; Lang, Undine E; Castille, Dorothy; Larkin, Stefan; Link, Bruce G

2017-01-01

People who suffer from severe mental illness often present with histories of abuse during childhood. Alcohol use disorders is a common co-morbidity of survivors of childhood abuse and neglect. This study analyzes the effects of stressful childhood experiences, a proxy for trauma, on the frequency of alcohol consumption and the utilization of health care services in a population of people with severe mental illness. There were 111 men (mean age: 35 years) and 72 women (mean age: 40.0 years) with severe mental illness that were recruited from psychiatric outpatient clinics in New York City. The analysis focused on lifetime prevalence of stressful childhood experiences, alcohol consumption, and utilization of health care services over time. The longitudinal data were analyzed over 12 months with a level-2 model (multilevel modeling). Out of the participants, 41.5% reported a history of more than four types of abusive experiences. There were 33.3% that had a DSM-IV diagnosis of alcohol abuse and 27.3% qualified for the Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition diagnosis of alcohol dependence throughout their lives. Stressful childhood experiences predicted an increased frequency of alcohol consumption over time. People with histories of childhood abuse had more often been to outpatient clinics and 12-step programs, but at the same time showed lower frequency rates of psychiatrist visits and visits to outpatient clinics. Childhood abuse is prevalent in people with severe mental illness and is related to an increased alcohol consumption. Despite an increased need of health care services, affected persons might encounter more barriers to access them.

47 CFR 73.699 - TV engineering charts.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false TV engineering charts. 73.699 Section 73.699 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Television Broadcast Stations § 73.699 TV engineering charts. This section consists of the following Figures...

Ergonomic assessments of three Idaho National Engineering Laboratory cafeterias

Energy Technology Data Exchange (ETDEWEB)

Ostrom, L.T.; Romero, H.A.; Gilbert, B.G.; Wilhelmsen, C.A.

1993-01-01

The Idaho National Engineering Laboratory is a Department of Energy facility that performs a variety of engineering and research projects. EG G Idaho is the prime contractor for the laboratory and, as such, performs the support functions in addition to technical, research, and development functions. As a part of the EG G Idaho Industrial Hygiene Initiative, ergonomic assessments were conducted at three Idaho National Engineering Laboratory Cafeterias. The purposes of the assessments were to determine whether ergonomic problems existed in the work places and, if so, to make recommendations to improve the work place and task designs. The study showed there were ergonomic problems in all three cafeterias assessed. The primary ergonomic stresses observed included wrist and shoulder stress in the dish washing task, postural stress in the dish washing and food preparation tasks, and back stress in the food handling tasks.

Ergonomic assessments of three Idaho National Engineering Laboratory cafeterias

Energy Technology Data Exchange (ETDEWEB)

Ostrom, L.T.; Romero, H.A.; Gilbert, B.G.; Wilhelmsen, C.A.

1993-05-01

The Idaho National Engineering Laboratory is a Department of Energy facility that performs a variety of engineering and research projects. EG&G Idaho is the prime contractor for the laboratory and, as such, performs the support functions in addition to technical, research, and development functions. As a part of the EG&G Idaho Industrial Hygiene Initiative, ergonomic assessments were conducted at three Idaho National Engineering Laboratory Cafeterias. The purposes of the assessments were to determine whether ergonomic problems existed in the work places and, if so, to make recommendations to improve the work place and task designs. The study showed there were ergonomic problems in all three cafeterias assessed. The primary ergonomic stresses observed included wrist and shoulder stress in the dish washing task, postural stress in the dish washing and food preparation tasks, and back stress in the food handling tasks.

Cyber-Informed Engineering

Energy Technology Data Exchange (ETDEWEB)

Anderson, Robert S. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Benjamin, Jacob [Idaho National Lab. (INL), Idaho Falls, ID (United States); Wright, Virginia L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Quinones, Luis [Idaho National Lab. (INL), Idaho Falls, ID (United States); Paz, Jonathan [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-03-01

A continuing challenge for engineers who utilize digital systems is to understand the impact of cyber-attacks across the entire product and program lifecycle. This is a challenge due to the evolving nature of cyber threats that may impact the design, development, deployment, and operational phases of all systems. Cyber Informed Engineering is the process by which engineers are made aware of both how to use their engineering knowledge to positively impact the cyber security in the processes by which they architect and design components and the services and security of the components themselves.

Cyber-Informed Engineering

International Nuclear Information System (INIS)

Anderson, Robert S.; Benjamin, Jacob; Wright, Virginia L.; Quinones, Luis; Paz, Jonathan

2017-01-01

A continuing challenge for engineers who utilize digital systems is to understand the impact of cyber-attacks across the entire product and program lifecycle. This is a challenge due to the evolving nature of cyber threats that may impact the design, development, deployment, and operational phases of all systems. Cyber Informed Engineering is the process by which engineers are made aware of both how to use their engineering knowledge to positively impact the cyber security in the processes by which they architect and design components and the services and security of the components themselves.

Understanding engineering professionalism: a reflection on the rights of engineers.

Science.gov (United States)

Stieb, James A

2011-03-01

Engineering societies such as the National Society of Professional Engineers (NSPE) and associated entities have defined engineering and professionalism in such a way as to require the benefit of humanity (NSPE 2009a, Engineering Education Resource Document. NSPE Position Statements. Governmental Relations). This requirement has been an unnecessary and unfortunate "add-on." The trend of the profession to favor the idea of requiring the benefit of humanity for professionalism violates an engineer's rights. It applies political pressure that dissuades from inquiry, approaches to new knowledge and technologies, and the presentation, publication, and use of designs and research findings. Moreover, a more politically neutral definition of engineering and/or professionalism devoid of required service or benefit to mankind does not violate adherence to strong ethical standards.

Procurement of Architectural and Engineering Services for Sustainable Buildings: A Guide for Federal Project Managers

Energy Technology Data Exchange (ETDEWEB)

2004-06-01

This guide was prepared to be a resource for federal construction project managers and others who want to integrate the principles of sustainable design into the procurement of professional building design and consulting services. To economize on energy costs and improve the safety, comfort, and health of building occupants, building design teams can incorporate daylighting, energy efficiency, renewable energy, and passive solar design into all projects in which these elements are technically and economically feasible. The information presented here will help project leaders begin the process and manage the inclusion of sustainable design in the procurement process. The section on establishing selection criteria contains key elements to consider before selecting an architectural and engineering (A/E) firm. The section on preparing the statement of work discusses the broad spectrum of sustainable design services that an A/E firm can provide. Several helpful checklists are included.

Civil Engineering in Primary Schools

Science.gov (United States)

Brown, Martin; Strong, Alan

2010-01-01

For many children of primary school age, an engineer is the man who comes to service the central heating system or who fixes the family car when it breaks down. Most have never met a "real" professional engineer, and have no idea of what is involved in the exciting world of engineering. Most assume that engineers are men. To try to…

STAFF TRAINING FOR SERVICE INDUSTRY

Directory of Open Access Journals (Sweden)

O. Petrenko

2015-03-01

Full Text Available In all countries across the world macroeconomic shift from the production of physical things (agriculture and manufactured goods to execution of the service of public service. In headmost countries more than 70% of GDP forms by service industry, in which over half of mankind is working today (according to the information of International Labor Organization. The science of services that occurred recently upon an initiative of IBM firm, designed to explore the main principles of functioning complex services systems, ways of creation, scaling and improving such systems. In this paper considered the questions of penetration the services in engineering systems (particularly, in software structures capabilities of the engineering and staffing processes of creating and maintaining of system services.

Fast substation service restoration using intelligent petri-nets models

Energy Technology Data Exchange (ETDEWEB)

Yang, H.T.; Peng, P.C.; Jiang, H.L. [Chung Yuan Christian Univ., Chung Li, Taiwan (China)

2006-07-01

Service restoration of a substation is a stressful and immediate task that must be conducted by system operators following a blackout. Operators, including those of Taiwan Power Company (TPC), normally restore power loads on the basis of their past experiences and engineering heuristics. Due to the significant number of switching operations to be evaluated, a computer-aided decision support system can be quite valuable. In distribution system automation, installation of unmanned substations requires an automated restoration computer system to rapidly devise a switching plan after a fault event. The modeling technique of Petri Nets (PNs) encompasses fault diagnosis of distribution systems, protective scheming of relays, and generic restoration schedule of power transmission systems. Knowledge or configuration about the system concerned can be expressed systematically through a structured model with parallelism and synchronization. This paper proposed a new PNs knowledge representation scheme to achieve a fast, on-line service restoration plan of a substation. The paper described the task of service restoration in a substation as well as the heuristic rules adopted by the dispatchers of the TPC distribution systems. The paper also introduced the topic of Typical PN properties and the proposed matrix operations for PNs reasoning. The proposed basic PNs model for service restoration on the basis of the engineering heuristics were also identified. It was concluded that the proposed approach not only facilitated software programming, but was highly adaptive to the extension or maintenance of the developed programs, arising from the changes of the substation configuration. 18 refs., 1 tab., 8 figs.

Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials

CERN Document Server

American Society for Testing and Materials. Philadelphia

2006-01-01

1.1 This test method establishes a test procedure for determining the propensity of aircraft turbine engine cleaning and maintenance materials for causing stress corrosion cracking of titanium alloy parts. 1.2 The evaluation is conducted on representative titanium alloys by determining the effect of contact with cleaning and maintenance materials on tendency of prestressed titanium alloys to crack when subsequently heated to elevated temperatures. 1.3 Test conditions are based upon manufacturer's maximum recommended operating solution concentration. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see and .

Effects of service condition on rolling contact fatigue failure mechanism and lifetime of thermal spray coatings—A review

Science.gov (United States)

Cui, Huawei; Cui, Xiufang; Wang, Haidou; Xing, Zhiguo; Jin, Guo

2015-01-01

The service condition determines the Rolling Contact Fatigue(RCF) failure mechanism and lifetime under ascertain material structure integrity parameter of thermal spray coating. The available literature on the RCF testing of thermal spray coatings under various condition services is considerable; it is generally difficult to synthesize all of the result to obtain a comprehensive understanding of the parameters which has a great effect on a thermal spray coating's resistance of RCF. The effects of service conditions(lubrication states, contact stresses, revolve speed, and slip ratio) on the changing of thermal spray coatings' contact fatigue lifetime is introduced systematically. The effects of different service condition on RCF failure mechanism of thermal spray coating from the change of material structure integrity are also summarized. Moreover, In order to enhance the RCF performance, the parameter optimal design formula of service condition and material structure integrity is proposed based on the effect of service condition on thermal spray coatings' contact fatigue lifetime and RCF failure mechanism. The shortage of available literature and the forecast focus in future researches are discussed based on available research. The explicit result of RCF lifetime law and parameter optimal design formula in term of lubrication states, contact stresses, revolve speed, and slip ratio, is significant to improve the RCF performance on the engineering application.

Use of frozen stress in extracting stress intensity factor distributions in three dimensional cracked body problems

Science.gov (United States)

Smith, C. W.

1992-01-01

The adaptation of the frozen stress photoelastic method to the determination of the distribution of stress intensity factors in three dimensional problems is briefly reviewed. The method is then applied to several engineering problems of practical significance.

Simulation based engineering in solid mechanics

CERN Document Server

Rao, J S

2017-01-01

This book begins with a brief historical perspective of the advent of rotating machinery in 20th century Solid Mechanics and the development of the discipline of the Strength of Materials. High Performance Computing (HPC) and Simulation Based Engineering Science (SBES) have gradually replaced the conventional approach in Design bringing science directly into engineering without approximations. A recap of the required mathematical principles is given. The science of deformation, strain and stress at a point under the application of external traction loads is next presented. Only one-dimensional structures classified as Bars (axial loads), Rods (twisting loads) and Beams (bending loads) are considered in this book. The principal stresses and strains and von Mises stress and strain that used in design of structures are next presented. Lagrangian solution was used to derive the governing differential equations consistent with assumed deformation field and solution for deformations, strains and stresses were obtai...

Plotting and Determination of Nominal Stresses in the Сrankshaft Components of V Configuration Engine with Offset Rod Bearing Journals

Directory of Open Access Journals (Sweden)

M. Yu. Mikhailov

2017-01-01

Full Text Available Currently, a great number of large vehicle engines, especially diesel ones, have a V-shaped configuration layout. For six-cylinder and eight-cylinder V-engines, to simplify a processing technology of the block-crankcases, in the section manufacturers often use the 90° angle, which is the most prevalent angle for the V8 engine. However, in this case, an even firing cycle in the cylinders is not provided for the V6 layout. This leads to significant vibrations, especially at idle and requires for a more massive flywheel.Designers face the challenge to provide the even firing cycle in the cylinders. To solve this problem are often used the crankshaft designs, which have the offset rod journals. However, it leads to the manufacturing complexity of the shaft, and also to the need to use the special methods of calculation.There are no direct calculation methods for the crankshafts of this design. The paper proposes a technique to define the nominal stresses in the crankshaft of this design. To consider the shaft is used a split-type design. The paper presents a schematic diagram of the crankshaft loading, and on its basis describes equations of the moments for each section. A special attention is drawn to the new constructive element, i.e. an intermediate cheek. For clarity, the diagrams of moments in two mutually perpendicular planes are built. It is worth noting that the paper also proposes a technique from transition from the global to the local coordinate system when considering the moments in the crankshaft elements.Further, there are the appropriate expressions to determine the nominal stresses. This is one of the main desired values in calculating the crankshaft endurance. The developed technique in the particular case allows the calculation of crankshaft engine models that can be subsumed under the advantages.In the future the proposed technique is expected to be a basis for creating a software complex. The complex objective is expected to be

46 CFR 15.820 - Chief engineer.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Chief engineer. 15.820 Section 15.820 Shipping COAST... Computations § 15.820 Chief engineer. (a) There must be an individual holding an MMC or license endorsed as chief engineer or other credential authorizing service as chief engineer employed on board the following...

Engineering Documentation and Data Control

Science.gov (United States)

Matteson, Michael J.; Bramley, Craig; Ciaruffoli, Veronica

2001-01-01

Mississippi Space Services (MSS) the facility services contractor for NASA's John C. Stennis Space Center (SSC), is utilizing technology to improve engineering documentation and data control. Two identified improvement areas, labor intensive documentation research and outdated drafting standards, were targeted as top priority. MSS selected AutoManager(R) WorkFlow from Cyco software to manage engineering documentation. The software is currently installed on over 150 desctops. The outdated SSC drafting standard was written for pre-CADD drafting methods, in other words, board drafting. Implementation of COTS software solutions to manage engineering documentation and update the drafting standard resulted in significant increases in productivity by reducing the time spent searching for documents.

Workplace Stress, Organizational Factors and EAP Utilization.

Science.gov (United States)

Azzone, Vanessa; McCann, Bernard; Merrick, Elizabeth Levy; Hiatt, Deirdre; Hodgkin, Dominic; Horgan, Constance

2009-01-01

This study examined relationships between workplace stress, organizational factors and use of EAP counseling services delivered by network providers in a large, privately-insured population. Claims data were linked to measures of workplace stress, focus on wellness/prevention, EAP promotion, and EAP activities for health care plan enrollees from 26 employers. The association of external environment and work organization variables with use of EAP counseling services was examined. Higher levels of EAP promotion and worksite activities were associated with greater likelihood of service use. Greater focus on wellness/prevention and unusual and significant stress were associated with lower likelihood of service use. Results provide stakeholders with insights on approaches to increasing utilization of EAP services.

Experimental stress analysis for four 24-in. ANSI standard B16.9 tees

International Nuclear Information System (INIS)

Hayes, J.K.; Moore, S.E.

1976-01-01

The experimental stress analysis and low cycle fatigue tests of four tees tested by Combustion Engineering, Inc. (E-E) under subcontract to Union Carbide Nuclear Division are described. These tests are part of the ORNL Design Criteria for Piping and Nozzles Program which is being conducted for the development of design criteria for nuclear power plant service piping components. The test assemblies were fabricated at C-E from commercially obtained ANSI B16.9 tees and matching diameter steel pipes welded to the tees, with suitable and closures and fixtures for applying the loads

47 CFR 73.599 - NCE-FM engineering charts.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false NCE-FM engineering charts. 73.599 Section 73.599 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Noncommercial Educational FM Broadcast Stations § 73.599 NCE-FM engineering charts. This...

Basic stress analysis

CERN Document Server

Iremonger, M J

1982-01-01

BASIC Stress Analysis aims to help students to become proficient at BASIC programming by actually using it in an important engineering subject. It also enables the student to use computing as a means of learning stress analysis because writing a program is analogous to teaching-it is necessary to understand the subject matter. The book begins by introducing the BASIC approach and the concept of stress analysis at first- and second-year undergraduate level. Subsequent chapters contain a summary of relevant theory, worked examples containing computer programs, and a set of problems. Topics c

Engineering IT-enabled sustainable electricity services the tale of two low-cost green Azores Islands

CERN Document Server

Xie, Le; Liu, Qixing

2013-01-01

Engineering IT-Enabled Electricity Services: The Tale of Two Low-Cost Green Azores Islands covers sustainable energy services to customers - a balanced choice and coordination of energy generated by traditional and alternative sources. The “Green Islands” project represents a decade of work by over a dozen researchers who have developed a model designed to utilize the potential of distributed clean resources. The key is the proper use of Information Technology (IT).  Sited on two islands in the Azores, the project developed the model of careful forecasting of demand and supply, down to the minute, coordinating the output of conventional power plants, wind energy, fly wheels, hydroelectricity, demand reduction, and even plug-in electric vehicles to take full advantage of the clean resources available. This contributed volume presents methods for predicting variable resources, such as wind power generation, and analyzes the achievable accuracy of these predictions. Throughout this book, contributors sho...

Fatigue in engineering structures. A three fold analysis approach

International Nuclear Information System (INIS)

Malik, Afzaal M.; Qureshi, Ejaz M.; Dar, Naeem Ullah; Khan, Iqbal

2007-01-01

The integrity in most of the engineering structures in influenced by the presence of cracks or crack like defects. These structures fail, even catastrophically if a crack greater than a critically safe size exist. Although most of the optimal designed structures are initially free from critical cracks, sub-critical cracks can lead to failures under cyclic loadings, called fatigue crack growth. It is nearly impractical to prevent sub-critical crack growth in engineering structures particularly in crack sensitive structures like most of the structures in nuclear, aerospace and aeronautical domains. However, it is essential to predict the fatigue crack growth for these structures to preclude the in service failures causing loss of assets. The present research presents an automatic procedure for the prediction of fatigue crack growth in three dimensional engineering structures and the key data for the fracture mechanics based design: the stress intensity factors. Three fold analysis procedures are adopted to investigate the effects of repetitive (cyclic) loadings on the fatigue life of different geometries of aluminum alloy 2219-O. A general purpose Finite Element (FE) Code ANSYS-8.0 is used to predict/estimate the fatigue life of the geometries. Computer codes utilizing the Green's Function are developed to calculate the stress intensity factors. Another code based on superposition technique presented by Shivakumara and Foreman is developed to calculate the fatigue crack growth rate, fatigue life (No. of loading cycles are developed to validate the results and finally full scale laboratory tests are conducted for the comparison of the results. The results showing a close co-relation between the different techniques employed gives the promising feature of the analysis approach for the future work. (author)

High Temperature Performance Evaluation of As-serviced 25Cr35Ni Type Heat-resistant Steel Based on Stress Relaxation Tests

Directory of Open Access Journals (Sweden)

XU Jun

2017-08-01

Full Text Available Based on an as-serviced 25Cr35Ni type steel, the high temperature property evaluation using stress relaxation test(SRT method and residual life prediction were studied. The results show that creep rupture property decreases because of the formation of network carbides along grain boundaries and coarsening of secondary carbides in the austenitic matrix. Based on the relationship of stress relaxation strain rate curves obtained at different temperatures, and the extrapolation equation of stress relaxation rate-rupture time, it is capable to perform residual life evaluation by combining SRT data and a small amount of creep rupture test(CRT. Good agreement is observed for predicting results performed by current method and traditional method.

Outcomes from eye movement desensitization and reprocessing in active-duty service members with posttraumatic stress disorder.

Science.gov (United States)

McLay, Robert N; Webb-Murphy, Jennifer A; Fesperman, Susan F; Delaney, Eileen M; Gerard, Steven K; Roesch, Scott C; Nebeker, Bonnie J; Pandzic, Ines; Vishnyak, Elizabeth A; Johnston, Scott L

2016-11-01

Eye movement desensitization and reprocessing (EMDR) is one of the therapy interventions recommended by the Veterans Affairs and Department of Defense Clinical Practice Guidelines. However, the literature concerning the effectiveness of this treatment modality in military service members is sparse. This study investigated the efficacy of EMDR in active-duty service members. We conducted an effectiveness study with a record review from active-duty military mental health clinics where clinical outcomes had been monitored over a 10-week period using self-report measures of posttraumatic stress and disability. Symptom scores were examined over time in 331 service members who met presumptive criteria for the disorder on the PTSD Checklist-Military Version (PCL-M), who were in psychotherapy, and who received (n = 46) or didn't receive (n = 285) EMDR. Results indicated that patients receiving EMDR had significantly fewer therapy sessions over 10 weeks but had significantly greater gains in their PCL-M scores than did individuals not receiving EMDR. Randomized, controlled trials are still needed, but these findings provide further support for the use of EMDR in service members with PTSD. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Reliability and safety engineering

CERN Document Server

Verma, Ajit Kumar; Karanki, Durga Rao

2016-01-01

Reliability and safety are core issues that must be addressed throughout the life cycle of engineering systems. Reliability and Safety Engineering presents an overview of the basic concepts, together with simple and practical illustrations. The authors present reliability terminology in various engineering fields, viz.,electronics engineering, software engineering, mechanical engineering, structural engineering and power systems engineering. The book describes the latest applications in the area of probabilistic safety assessment, such as technical specification optimization, risk monitoring and risk informed in-service inspection. Reliability and safety studies must, inevitably, deal with uncertainty, so the book includes uncertainty propagation methods: Monte Carlo simulation, fuzzy arithmetic, Dempster-Shafer theory and probability bounds. Reliability and Safety Engineering also highlights advances in system reliability and safety assessment including dynamic system modeling and uncertainty management. Cas...

46 CFR 15.915 - Engineer Officer Endorsements.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Engineer Officer Endorsements. 15.915 Section 15.915... REQUIREMENTS Equivalents § 15.915 Engineer Officer Endorsements. The following licenses and MMC officer... designated duty engineer license or endorsement authorizes service as chief or assistant engineer on vessels...

KNOVEL: A NEW SERVICE FOR THE ENGINEERING COMMUNITY

CERN Multimedia

2001-01-01

Electronic books available on trial at CERN Electronic preprints and journals have become tools used on a daily basis, but so far the CERN Library did not provide a significant collection of electronic books. This is now about to change, so searching for scientific information, and in particular engineering-related references, is now easier than ever before. CERN has access to the electronic book collection via Knovel on a trial base until Xmas. Knovel has a database of some of the leading engineering reference handbooks and conference proceedings, published by Reed Elsevier, ASME, ASM, Butterworth, CRC Press, McGraw-Hill and others. The full-text of all e-books can be searched simultaneously. Another Knovel feature allows users to search for data (materials properties) across the whole digital collection. The Web search engine and display interface has been developed to support a wide range of information and file types: text, tables, equations, graphics, figures. This new resource is linked to from the Libr...

CDMA systems capacity engineering

CERN Document Server

Kim, Kiseon

2004-01-01

This new hands-on resource tackles capacity planning and engineering issues that are crucial to optimizing wireless communication systems performance. Going beyond the system physical level and investigating CDMA system capacity at the service level, this volume is the single-source for engineering and analyzing systems capacity and resources.

Three-dimensional study of grain boundary engineering effects on intergranular stress corrosion cracking of 316 stainless steel in high temperature water

Science.gov (United States)

Liu, Tingguang; Xia, Shuang; Bai, Qin; Zhou, Bangxin; Zhang, Lefu; Lu, Yonghao; Shoji, Tetsuo

2018-01-01

The intergranular cracks and grain boundary (GB) network of a GB-engineered 316 stainless steel after stress corrosion cracking (SCC) test in high temperature high pressure water of reactor environment were investigated by two-dimensional and three-dimensional (3D) characterization in order to expose the mechanism that GB-engineering mitigates intergranular SCC. The 3D microstructure shown that the essential characteristic of the GB-engineered microstructure is formation of many large twin-boundaries as a result of multiple-twinning, which results in the formation of large grain-clusters. The large grain-clusters played a key role to the improvement of intergranular SCC resistance by GB-engineering. The main intergranular cracks propagated in a zigzag along the outer boundaries of these large grain-clusters because all inner boundaries of the grain-clusters were twin-boundaries (∑3) or twin-related boundaries (∑3n) which had much lower susceptibility to SCC than random boundaries. These large grain-clusters had tree-ring-shaped topology structure and very complex morphology. They got tangled so that difficult to be separated during SCC, resulting in some large crack-bridges retained in the crack surface.

Jacobs Engineering Group Inc. receives architectural and engineering design contract from Stanford Linear Accelerator Centre

CERN Multimedia

2004-01-01

"Jacobs Engineering Group Inc. announced that a subsidiary company won a contract from Stanford Linear Accelerator Center (SLAC), to provide architectural and engineering design services for the Linac Coherent Light Source (LCLS) conventional facilities" (1/2 page)

UPS fellowships support creative engineering research

OpenAIRE

Crumbley, Liz

2007-01-01

A new $40,000 grant marks the 11th anniversary of support from the United Parcel Service (UPS) Foundation for doctoral fellowships in the Human Factors and Safety Engineering Graduate Program in the Grado Department of Industrial and Systems Engineering (ISE) in the College of Engineering.

Global Software Engineering

DEFF Research Database (Denmark)

Ebert, Christof; Kuhrmann, Marco; Prikladnicki, Rafael

2016-01-01

Professional software products and IT systems and services today are developed mostly by globally distributed teams, projects, and companies. Successfully orchestrating Global Software Engineering (GSE) has become the major success factor both for organizations and practitioners. Yet, more than...... and experience reported at the IEEE International Conference on Software Engineering (ICGSE) series. The outcomes of our analysis show GSE as a field highly attached to industry and, thus, a considerable share of ICGSE papers address the transfer of Software Engineering concepts and solutions to the global stage...

Role of multiaxial stress state in the hydrogen-assisted rolling-contact fatigue in bearings for wind turbines

Directory of Open Access Journals (Sweden)

J. Toribio

2015-07-01

Full Text Available Offshore wind turbines often involve important engineering challenges such as the improvement of hydrogen embrittlement resistance of the turbine bearings. These elements frequently suffer the so-called phenomenon of hydrogen-assisted rolling-contact fatigue (HA-RCF as a consequence of the synergic action of the surrounding harsh environment (the lubricant supplying hydrogen to the material and the cyclic multiaxial stress state caused by in-service mechanical loading. Thus the complex phenomenon could be classified as hydrogen-assisted rolling-contact multiaxial fatigue (HA-RC-MF. This paper analyses, from the mechanical and the chemical points of view, the so-called ball-on-rod test, widely used to evaluate the hydrogen embrittlement susceptibility of turbine bearings. Both the stress-strain states and the steady-state hydrogen concentration distribution are studied, so that a better elucidation can be obtained of the potential fracture places where the hydrogen could be more harmful and, consequently, where the turbine bearings could fail during their life in service.

A comparison of families of children with autism spectrum disorders in family daily routines, service usage, and stress levels by regionality.

Science.gov (United States)

McAuliffe, Tomomi; Vaz, Sharmila; Falkmer, Torbjörn; Cordier, Reinie

2017-11-01

To explore whether family routines, service usage, and stress levels in families of children with autism spectrum disorder differ as a function of regionality. Secondary analysis of data was undertaken from 535 surveys. Univariate and multivariate analyses were performed to investigate differences between families living in densely populated (DP) areas and less densely populated (LDP) areas. Families living in LDP areas were found to: (1) have reduced employment hours (a two-parent household: Exp (B) = 3.48, p single-parent household: Exp (B) = 3.32, p = .011); (2) travel greater distance to access medical facilities (Exp (B) = 1.27, p = .006); and (3) report less severe stress levels (Exp (B) = 0.22, p = .014). There were no differences in family routines; however, flexible employment opportunities and travel distance to medical services need to be considered in families living in LDP areas.

New marketing mix stresses service.

Science.gov (United States)

Collier, D A

1991-01-01

The seven Ps of service management include some nontraditional ingredients to help formulate marketing strategy. Two examples illustrate how competitive advantage can be won or lost based on applying or ignoring the seven Ps.

Developing excellence awareness at Davis-Besse through engineering quality management

International Nuclear Information System (INIS)

Gaudette, M.R.; Lash, J.H.; Haiman, D.L.

1989-01-01

At Davis-Besse nuclear power station engineering quality management includes a variety of chartered functions whose ultimate objective is to improve product and service quality and process efficiency. These functions were assigned in late 1988 to engineering assurance personnel, a section of the engineering department which reports directly to the engineering director but is independent of design activities. This independence ensures objectivity and allows the improvement process to span functional areas so that changes made in one engineering section do not negatively impact the activities of another section. The engineering quality management functions performed by the engineering assurance group are summarized. Engineering quality management at Davis-Besse has increased the degree of excellence evident in engineering products and services

Work-related stress management by Finnish enterprises.

Science.gov (United States)

Kinnunen-Amoroso, Maritta; Liira, Juha

2014-01-01

Work-related stress has become one of the major problems in working societies and it increases employees' risk of disease. Its importance has been emphasized also due to its' great socio-economic consequences. Different stress management and worksite interventions have been implemented, however, the actual practices in companies have been assessed little. The purpose of this study was to examine how enterprises in Finland manage work-related stress. An assessment of work-related stress methods was conducted in 40 enterprises acting in the metropolitan area of Finland in May 2010 by a questionnaire. The concept of work-related stress was well known by participants. Enterprises rarely had their own work-related stress management protocol even though all of the workplaces had experienced work-related stress at some point. The collaboration between the workplace and occupational health services varied. Companies easily placed the responsibility for work-related stress assessment and handling on occupational health services. Workplaces have to pay more attention to work-related stress and related issues. The easiest way to do this is to collaborate with occupational health services. Protocols for collaboration should be developed jointly using the available models which have been established as cost-effective.

Using Conjugate Gradient Network to Classify Stress Level of Patients.

Directory of Open Access Journals (Sweden)

Er. S. Pawar

2013-02-01

Full Text Available Diagnosis of stress is important because it can cause many diseases e.g., heart disease, headache, migraine, sleep problems, irritability etc. Diagnosis of stress in patients often involves acquisition of biological signals for example heart rate, electrocardiogram (ECG, electromyography signals (EMG etc. Stress diagnosis using biomedical signals is difficult and since the biomedical signals are too complex to generate any rule an experienced person or expert is needed to determine stress levels. Also, it is not feasible to use all the features that are available or possible to extract from the signal. So, relevant features should be chosen from the extracted features that are capable to diagnose stress. Electronics devices are increasingly being seen in the field of medicine for diagnosis, therapy, checking of stress levels etc. The research and development work of medical electronics engineers leads to the manufacturing of sophisticated diagnostic medical equipment needed to ensure good health care. Biomedical engineering combines the design and problem solving skills of engineering with medical and biological sciences to improve health care diagnosis and treatment.

Tests with Inconel 600 to obtain quantitative stress-corrosion cracking data for evaluating service performance

International Nuclear Information System (INIS)

Bandy, R.; van Rooyen, D.

1982-09-01

Inconel 600 tubes in pressurized water reactor (PWR) steam generators form a pressure boundary between radioactive primary water and secondary water which is converted to steam and used for generating electricity. Under operating conditions the performance of alloy 600 has been good, but with some occasional small leaks resulting from stress corrosion cracking (SCC), related to the presence of unusually high residual or operating stresses. The suspected high stresses can result from either the deformation of tubes during manufacture, or distortion during abnormal conditions such as denting. The present experimental program addresses two specific conditions, i.e., (1) where deformation occurs but is no longer active, such as when denting is stopped and (2) where plastic deformation of the metal continues, as would occur during denting. Laboratory media consist of pure water as well as solutions to simulate environments that would apply in service; tubing from actual production is used in carrying out these tests. The environments include both normal and off chemistries for primary and secondary water. The results reported here were obtained in several different tests. The main ones are (1) split tube reverse U-bends, (2) constant extension rate tests (CERT), and (3) constant load. The temperature range covered is 290 to 365 0 C

Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Waste Disposal Facility

Energy Technology Data Exchange (ETDEWEB)

Ansley, Shannon Leigh

2002-02-01

The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering and Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist.

Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Wastewater Discharge Facility

International Nuclear Information System (INIS)

Ansley, Shannon L.

2002-01-01

The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering and Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist

Analysis of irradiation-induced stresses in coating layers of coated fuel particles for the High Temperature Engineering Test Reactor (HTTR)

International Nuclear Information System (INIS)

Hayashi, Kimio; Kikuchi, Teruo; Fukuda, Kousaku; Sato, Sadao; Toyota, Junji; Shiozawa, Shusaku; Sawa, Kazuhiro; Kashimura, Satoru.

1991-07-01

Irradiation-induced stresses in coating layers of coated fuel particles were analyzed by the MICROS-2 code for the fuels of the High Temperature Engineering Test Reactor (HTTR) under its operating conditions. The analyses were made on the standard core fuel (A-type) and the test fuels comprising the advanced SiC-coated particle fuel (B-1 type) and the ZrC-coated particle fuel (B-2 type). For the B-1 type fuel, the stresses were relieved due to the thicker buffer and SiC layers than for the A type fuel. The slightly decreased thickness of the fourth layer for the B-1 type than for the A type fuel had no significant effect on the stresses. As for the B-2 type fuel, almost the same results as for the B-1 type were obtained under an assumption that the ZrC layer as well as the SiC layer undergoes negligible dimension change within the analysis conditions. The obtained results indicated that the B-1 and B-2 type fuels are better than the A type fuel in terms of integrity against the irradiation-induced stresses. Finally, research subjects for development of the analysis code on the fuel behavior are discussed. (author)

Ensuring Structural Integrity through Reliable Residual Stress Measurement: From Crystals to Crankshafts

International Nuclear Information System (INIS)

Edwards, Lyndon

2005-01-01

Full text: The determination of accurate, reliable stresses is critical to many fields of engineering and, in particular, the structural integrity and hence, safety, of many systems. Neutron stress measurement is a non-destructive technique that uniquely provides insights into stress fields deep within components and structures. As such, it has become an increasingly important tool within the engineering community leading to improved manufacturing processes to reduce stress and distortion as well as to the definition of more precise structural integrity lifting procedures. This talk describes the current state of the art and identifies the key opportunities for improved structural integrity provided by the 2nd generation dedicated engineering stress diffractometers currently being designed and commissioned world-wide. Examples are provided covering a range of industrially relevant problems from the fields. (author)

Auditing Search Engines for Differential Satisfaction Across Demographics

OpenAIRE

Mehrotra, R.; Anderson, A.; Diaz, F.; Sharma, A.; Wallach, H. M.; Yilmaz, E.

2017-01-01

Many online services, such as search engines, social media platforms, and digital marketplaces, are advertised as being available to any user, regardless of their age, gender, or other demographic factors. However, there are growing concerns that these services may systematically underserve some groups of users. In this paper, we present a framework for internally auditing such services for differences in user satisfaction across demographic groups, using search engines as a case study. We fi...

Web services foundations

CERN Document Server

Bouguettaya, Athman; Daniel, Florian

2013-01-01

Web services and Service-Oriented Computing (SOC) have become thriving areas of academic research, joint university/industry research projects, and novel IT products on the market. SOC is the computing paradigm that uses Web services as building blocks for the engineering of composite, distributed applications out of the reusable application logic encapsulated by Web services. Web services could be considered the best-known and most standardized technology in use today for distributed computing over the Internet.Web Services Foundations is the first installment of a two-book collection coverin

Detecting A Botnet By Reverse Engineering

Directory of Open Access Journals (Sweden)

Oesman Hendra Kelana

2013-06-01

Full Text Available Abstract— Botnet malware is a malicious program. Botnet that infects computers, called bots, will be controlled by a botmaster to do various things such as: spamming, phishing, keylogging Distributed Denial of Service (DDoS and other activities that are generally profitable to the owner of the bot (botmaster or those who use botnet services. The problem is that many computers have been controlled by botnets without the knowledge of the computer owner.  There are many ways to examine botnets, for example by studying the traffic from the botnet network, studying how botnets communicate to each, studying how each robot receives orders to do something, and so forth. Of the many methods, the most frequently and commonly used is the reverse engineering, where researchers study how a botnet works by botnet debugging. In this study the author tries to understand or research botnets by taking a type of botnet, namely Agobot, using reverse engineering.  One of the result of the research is that malware program files in general and in particular botnet has a technique to obscure the way that research using reverse engineering. Another result also shows that the botnet Agobot runs on computers by using the Windows service, and by changing the Windows registry so that every time the computer starts, Agobot always actively works in the computer memory. Keywords— Malware, Bot, Botnet, Botmaster, Agobot, Spam, Distributed Denial of Services, Identity Theft, Computer Security, Reverse Engineering, Debug, Windows Service, the Registry.

Matcom 86: Engineering materials in South Africa

International Nuclear Information System (INIS)

1986-01-01

The Symposium MATCOM '86 represents a significant departure from the usual format of scientific and engineering conferences. It provides a unique opportunity for industrialists, economists, the engineering and scientific communities, and research and development establishments to be briefed on critical issues relating to engineering materials and the effect of these materials on the manufacturing, service, health, strategic and minerals industries. Profitability and productivity in industry can often be linked to engineering materials and their in-service performance. Major surveys conducted in South Africa and developed countries have revealed the significance of losses to industry due to materials degradation problems such as fracture, wear, corrosion etc. One of the papers delivered at this symposium focus on the nuclear engineering industry, namely the application of materials in the field of uranium enrichment

Disturbance-mediated facilitation by an intertidal ecosystem engineer.

Science.gov (United States)

Wright, Jeffrey T; Gribben, Paul E

2017-09-01

Ecosystem engineers facilitate communities by providing a structural habitat that reduces abiotic stress or predation pressure for associated species. However, disturbance may damage or move the engineer to a more stressful environment, possibly increasing the importance of facilitation for associated communities. In this study, we determined how disturbance to intertidal boulders (i.e., flipping) and the subsequent movement of a structural ecosystem engineer, the tube-forming serpulid worm Galeolaria caespitosa, from the bottom (natural state, low abiotic stress) to the top (disturbed state, high abiotic stress) surface of boulders influenced the importance of facilitation for intertidal communities across two intertidal zones. Theory predicts stronger relative facilitation should occur in the harsher environments of the top of boulders and the high intertidal zone. To test this prediction, we experimentally positioned boulders with the serpulids either face up or face down for 12 months in low and high zones in an intertidal boulder field. There were very different communities associated with the different boulders and serpulids had the strongest facilitative effects on the more stressful top surface of boulders with approximately double the species richness compared to boulders lacking serpulids. Moreover, within the serpulid matrix itself there was also approximately double the species richness (both zones) and abundance (high zone only) of small invertebrates on the top of boulders compared to the bottom. The high relative facilitation on the top of boulders reflected a large reduction in temperature by the serpulid matrix on that surface (up to 10°C) highlighting a key role for modification of the abiotic environment in determining the community-wide facilitation. This study has demonstrated that disturbance and subsequent movement of an ecosystem engineer to a more stressful environment increased the importance of facilitation and allowed species to

Use of Strain Measurements from Acoustic Bench Tests of the Battleship Flowliner Test Articles To Link Analytical Model Results to In-Service Resonant Response

Science.gov (United States)

Frady, Greg; Smaolloey, Kurt; LaVerde, Bruce; Bishop, Jim

2004-01-01

The paper will discuss practical and analytical findings of a test program conducted to assist engineers in determining which analytical strain fields are most appropriate to describe the crack initiating and crack propagating stresses in thin walled cylindrical hardware that serves as part of the Space Shuttle Main Engine's fuel system. In service the hardware is excited by fluctuating dynamic pressures in a cryogenic fuel that arise from turbulent flow/pump cavitation. A bench test using a simplified system was conducted using acoustic energy in air to excite the test articles. Strain measurements were used to reveal response characteristics of two Flowliner test articles that are assembled as a pair when installed in the engine feed system.

Work-related stress management between workplace and occupational health care.

Science.gov (United States)

Kinnunen-Amoroso, Maritta; Liira, Juha

2016-06-13

Work-related stress has been evaluated as one of the most important health risks in Europe. Prevention of work related stress and interventions to reduce risk factors for stress in the workplace are conducted together by the enterprise and occupational health services. The aim of the study was to examine the experiences of Finnish occupational physicians on the stress management with enterprises. From the Finnish Association of Occupational Health Physicians membership list 207 physicians responded to self-administered anonymous questionnaire. The data were analysed using SPSS 17.0. The client enterprises contacted occupational health services frequently about work-related stress. Collaboration between occupational health and enterprises was strongest in companies' own occupational health services and generally with most experienced physicians. Occupational health services and enterprises shared responsibility for managing work-related stress. Professional experience and close contact with organisation management favours successful stress management between occupational health and enterprises.

Product with service, technology with business model

DEFF Research Database (Denmark)

Sakao, Tomohiko; McAloone, Tim C.

2011-01-01

Looking back over the last decade, the importance of an expanded understanding of engineering design has been shared within the engineering design community. Presented concepts and methods to support such expansion include Functional Product Development, Service Engineering, and Product/Service-S...... promising concept beyond PSS design; via an integrated development of technology and business model. This can be of particular interest for further research, especially due to its high freedom for designers....

48 CFR 836.606-71 - Architect-engineer's proposal.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Architect-engineer's... AFFAIRS SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 836.606-71 Architect-engineer's proposal. (a) When the contract price is estimated to be $50,000...

Engineering Parameters in Bioreactor's Design: A Critical Aspect in Tissue Engineering

Science.gov (United States)

Amoabediny, Ghassem; Pouran, Behdad; Tabesh, Hadi; Shokrgozar, Mohammad Ali; Haghighipour, Nooshin; Khatibi, Nahid; Mottaghy, Khosrow; Zandieh-Doulabi, Behrouz

2013-01-01

Bioreactors are important inevitable part of any tissue engineering (TE) strategy as they aid the construction of three-dimensional functional tissues. Since the ultimate aim of a bioreactor is to create a biological product, the engineering parameters, for example, internal and external mass transfer, fluid velocity, shear stress, electrical current distribution, and so forth, are worth to be thoroughly investigated. The effects of such engineering parameters on biological cultures have been addressed in only a few preceding studies. Furthermore, it would be highly inefficient to determine the optimal engineering parameters by trial and error method. A solution is provided by emerging modeling and computational tools and by analyzing oxygen, carbon dioxide, and nutrient and metabolism waste material transports, which can simulate and predict the experimental results. Discovering the optimal engineering parameters is crucial not only to reduce the cost and time of experiments, but also to enhance efficacy and functionality of the tissue construct. This review intends to provide an inclusive package of the engineering parameters together with their calculation procedure in addition to the modeling techniques in TE bioreactors. PMID:24000327

Engineering parameters in bioreactor's design: a critical aspect in tissue engineering.

Science.gov (United States)

Salehi-Nik, Nasim; Amoabediny, Ghassem; Pouran, Behdad; Tabesh, Hadi; Shokrgozar, Mohammad Ali; Haghighipour, Nooshin; Khatibi, Nahid; Anisi, Fatemeh; Mottaghy, Khosrow; Zandieh-Doulabi, Behrouz

2013-01-01

Bioreactors are important inevitable part of any tissue engineering (TE) strategy as they aid the construction of three-dimensional functional tissues. Since the ultimate aim of a bioreactor is to create a biological product, the engineering parameters, for example, internal and external mass transfer, fluid velocity, shear stress, electrical current distribution, and so forth, are worth to be thoroughly investigated. The effects of such engineering parameters on biological cultures have been addressed in only a few preceding studies. Furthermore, it would be highly inefficient to determine the optimal engineering parameters by trial and error method. A solution is provided by emerging modeling and computational tools and by analyzing oxygen, carbon dioxide, and nutrient and metabolism waste material transports, which can simulate and predict the experimental results. Discovering the optimal engineering parameters is crucial not only to reduce the cost and time of experiments, but also to enhance efficacy and functionality of the tissue construct. This review intends to provide an inclusive package of the engineering parameters together with their calculation procedure in addition to the modeling techniques in TE bioreactors.

Engineering department annual progress report 1 January -31 December 1978

International Nuclear Information System (INIS)

1979-07-01

A representative survey of the activities of the Engineering Department during 1978 is given followed by brief presentation of selected activities. Main activity areas are structural mechanics, engineering services, and technical support service and logistics. (author)

Proposal for the increase of the contract amounts for LHC civil engineering construction and civil engineering consultancy contracts

CERN Document Server

2001-01-01

This document concerns the increase of the contract amounts for LHC civil engineering construction contracts and civil engineering consultancy contracts. The Finance Committee is invited to agree to the increase of the contract amounts with: - the joint venture TEERAG-ASDAG (AT), C. BARESEL (DE) and LOCHER (CH) for civil engineering construction, package 1, for a revised total amount of 91 500 000 Swiss francs, subject to revision; - the joint venture EDF (FR) and KNIGHT&PIESOLD (GB) for the provision of civil engineering consultancy services, package 1, for a revised total amount of 14 400 000 Swiss francs, subject to revision; - the joint venture TAYLOR WOODROW (GB), AMEC (GB) and SPIE BATIGNOLLES (FR) for civil engineering construction, package 3a, for a revised total amount of 118 000 000 Swiss francs, subject to revision; - the joint venture BROWN&ROOT (GB), INTECSA (ES) and HIDROTECNICA (PT) for the provision of civil engineering consultancy services, package 3, for a revised total amount of 14 ...

Engineer: The Professional Bulletin of Army Engineers, Jan-Apr 2010

Science.gov (United States)

2010-04-01

Dornstadter 51 Transformation in Korea By Major Rafael Pazos and Captain Miguel Uc Headquarters, Department of the ArmyVolume 40 PB 5-10-1...States with an By Major Rafael Pazos and Captain Miguel Uc January-April 201052 Engineer initial grant of 205 acres at USAG–Humphreys, allowing the...the quality of life of our Service members. Major Pazos is the deputy commander of the United States Army Corps of Engineers (USACE), Gulf Region

Understanding structural engineering from theory to practice

CERN Document Server

Chen, Wai-Fah

2011-01-01

In our world of seemingly unlimited computing, numerous analytical approaches to the estimation of stress, strain, and displacement, including analytical, numerical, physical, and analog techniques, have greatly advanced the practice of engineering. Combining theory and experimentation, computer simulation has emerged as a third path for engineering design and performance evaluation. As a result, structural engineers working in the practical world of engineering must apply, and ideally, thrive, on these idealizations of science-based theories. Analyzing the major achievements in the field, Und

Beyond the gats: Implicit engines in services RTAs

Directory of Open Access Journals (Sweden)

Daniltsev Alexander

2015-01-01

Full Text Available In the last 15 years the reciprocity of regional trade agreements on services has become a global phenomenon. Whereas main provisions regulating access to the services market are fixed by specific obligations under the General Agreement on Trade in Services, RTAs have been considered a flexible means for liberalization and an expedient to protect national service providers. This article explores the role of the GATS and other agreements, both under and not under the mandate of the World Trade Organization, in trade blocs. The econometric model developed by the authors shows that the removal of restrictions for foreign suppliers under domestic regulation (consumer protection, regulation of labor market and the elimination of discriminatory measures on foreign investments that affect trade in goods are likely to be more important for the expansion of services trade on a preferential basis than the GATS-type liberalization.

Management of work-related stress by Finnish occupational physicians.

Science.gov (United States)

Kinnunen-Amoroso, M; Liira, J

2013-07-01

Occupational stress is a serious threat to the well-being of employees and organizations and may cause ill-health and loss of productivity. Determining the methods that occupational health (OH) services and employers use to manage work-related stress can help to detect both barriers and facilitating factors for effective stress management. To examine stress management methods used by OH physicians in Finland. Anonymous, self-administered e-mail questionnaire to Finnish OH physicians. A total of 222 OH physicians responded. Neither OH services nor their client organizations used standardized tools to assess or manage work-related stress. Work-related stress was assessed using patient interviews. Physicians reported that the main method used to manage occupational stress was supporting the individual employee. Half of the physicians attempted to involve workplaces in stress management by asking their patients to contact their supervisors regarding stress issues. In order to tackle work-related stress consistently and effectively employers and OH services should have agreed standardized protocols for managing stress in the workplace.

Appropriate levels of service

CSIR Research Space (South Africa)

Wall, K

2010-02-01

Full Text Available The term "services", as used in this article, broadly refers to infrastructure (in particular, civil and electrical engineering infrastructure), and also the infrastructure elements such as schools, clinics and halls. The term "basic services...

Becoming a client of the Danish social service system increases stress in parents of disabled infants.

Science.gov (United States)

Graungaard, Anette Hauskov; Skov, Liselotte; Andersen, John Sahl

2011-06-01

Parents of a young child with severe disabilities are facing a large range of new challenges; furthermore, most of these families have extended social needs regarding information, financial support, day care facilities, disability aids, etc. Many parents with disabled children have been found to be dissatisfied with social services. This study explores parents' experiences with Danish social services during their transition to a new daily life after the birth of a severely disabled child. Repeated qualitative interviews were performed individually with 16 parents of a severely disabled young child during the first two years after the diagnosis of the child's disabilities. Data were analysed using grounded theory. We found that the encounter with the social services increased stress in the families. Parental expectations were not met, especially regarding information; parents felt clientized, and obtaining social support was very resource consuming. Parents' needs regarding practical support and empathic case-working were not met and they spent much time and effort due to lacking continuity between sectors. Parents have specific needs when becoming clients in the social service system whose organisation of social services needs improvement. Health care professionals are advised to identify problems and support cooperation between the parents and the social service system, as well as to report the health-related consequences of prolonged and inefficient case-working for the child and its parents. was received from Socialministeriet, Landsforeningen LEV, Ronald McDonalds Børnefond, Susie og Peter Robinsohns fond, Rosalie Petersens fond, PLU-fonden, Ville Heises fond, Sygesikringens forskningsfond, Helsefonden, Elsass fonden. not relevant.

Multimedia Software Laboratory | College of Engineering & Applied Science

Science.gov (United States)

Support Milwaukee Engineering Research Conference 2018 Poster Competition Business Corporate Partners Engineer Research Collaborations Corporate Services Product Realization Business Tour Give Entrepreneurship -oriented methods, and performance analysis. Research Message from the Associate Dean Milwaukee Engineerâ

NPP Engineering and Servicing / Design Analysis Department

International Nuclear Information System (INIS)

Sik, J.

2006-01-01

The article provides an overview of the activities of the SKODA JS's Design Analysis Department performed recently in the fields of reactor physics, shielding physics, thermal hydraulics and mechanical structure stresses and life analysis. (orig.)

Foundations of Blueprint for Cloud-based Service Engineering

OpenAIRE

Nguyen, D.K.

2011-01-01

Current cloud-based service offerings are often provided as one-size-fits-all solution and give little or no room for customization. This limits the ability for application developers to pick and choose offerings from multiple software, platform and infrastructure service providers and configure them dynamically and in an optimal fashion to address their application requirements. Furthermore, combining different independent cloud-based services necessitates a uniform description format that f...

The association between in-service sexual harassment and post-traumatic stress disorder among Department of Veterans Affairs disability applicants.

Science.gov (United States)

Murdoch, Maureen; Polusny, Melissa A; Hodges, James; Cowper, Diane

2006-02-01

The goal was to describe the association between post-traumatic stress disorder (PTSD) and in-service sexual harassment in a nationally representative sample of Department of Veterans Affairs PTSD disability applicants. The study was a cross-sectional survey. Of 4,918 eligible veterans, 3,337 (68%) returned surveys. Nonresponse bias appeared to be minimal. After adjustment for other reported traumas, women's reported in-service sexual harassment severity was significantly associated with PTSD symptom severity (p men and for in-service sexual assault among the women. Men showed no association between in-service sexual harassment and PTSD (p = 0.33), although power was low for this test. Sexual harassment significantly contributed to female veterans' PTSD symptoms; its contribution to men's symptoms was unclear. We discuss mechanisms through which sexual harassment might affect PTSD symptom severity, including the possibility that sexual harassment sometimes meets the Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, definition of a criterion A stressor.

Post-traumatic stress disorder and its predictors in emergency medical service personnel: a cross-sectional study from Karachi, Pakistan.

Science.gov (United States)

Kerai, Salima Mansoor; Khan, Uzma Rahim; Islam, Muhammad; Asad, Nargis; Razzak, Junaid; Pasha, Omrana

2017-08-29

Emergency medical service (EMS) personnel who work to provide emergency medical care at the scene and during transportation are exposed to various kinds of stressors and are particularly susceptible to developing stress-reactions. This study assesses symptoms of post-traumatic stress disorder and its predictors among the personnel of a selected EMS in Karachi, Pakistan. Data were gathered from 518 personnel working in an EMS setting from February to May 2014. Participants were screened for post-traumatic stress symptoms using the Impact of Event Scale-Revised (IES-R). Demographic and work-related characteristics, coping styles and the social support systems of the participants were assessed. Linear regression was used on the IES-R to identify predictors of post-traumatic stress symptoms. The mean score of the IES-R was 23.9 ± 12.1. EMS personnel with a dysfunctional coping style (β = 0.67 CI 0.39 - 0.95), anxiety, and depression (β = 0.64 CI 0.52 - 0.75) were more likely to have increased severity of post-traumatic stress symptoms. Age was found to have an inverse relationship with stress symptoms (β = -0.17 CI 0.33 - -0.023), indicating the susceptibility of younger EMS personnel to stress. The EMS personnel in this setting were found to have a moderate level of post-traumatic stress symptoms. The significant predictors of post-traumatic stress symptoms in this EMS population were age, coping style, and levels of anxiety and depression. These predicting factors can be a potential avenue for interventions to improve the mental health of these frontline workers.

Value-based service modeling and design : Toward a unified view of services

NARCIS (Netherlands)

Weigand, H.; Johannesson, P.; Andersson, B.; Bergholtz, M.; van Eck, P.; Gordijn, J.; Wierenga, R.J.

2009-01-01

Service-oriented architectures are the upcoming business standard for realizing enterprise information systems, thus creating a need for analysis and design methods that are truly service-oriented. Most research on this topic so far takes a software engineering perspective. For a proper alignment

76 FR 51431 - Ericsson Services, Inc., Currently Known as Ericsson, Inc., Service Assurance, Deployment and...

Science.gov (United States)

2011-08-18

... Services, Inc., Currently Known as Ericsson, Inc., Service Assurance, Deployment and Integration, and... Known as Ericsson, Inc., Service Assurance, Deployment and Integration, and Engineering and IS/IT... Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance with Section 223 of the Trade...

Advanced web services

CERN Document Server

Bouguettaya, Athman; Daniel, Florian

2013-01-01

Web services and Service-Oriented Computing (SOC) have become thriving areas of academic research, joint university/industry research projects, and novel IT products on the market. SOC is the computing paradigm that uses Web services as building blocks for the engineering of composite, distributed applications out of the reusable application logic encapsulated by Web services. Web services could be considered the best-known and most standardized technology in use today for distributed computing over the Internet. This book is the second installment of a two-book collection covering the state-o

Teaching sustainability in engineering solutions with Campus Service as case

DEFF Research Database (Denmark)

Olsen, Stig Irving; McAloone, Tim C.; Nielsen, Susanne Balslev

2014-01-01

Engineers potentially influence the sustainability of technological solutions significantly. At DTU Management Engineering we aim to address sustainability to all engineering students at DTU. One of the means to address students throughout DTU is the establishment of a course aimed at bachelor...... students on all study lines. The objectives of the course is for the participants to acquire an understanding of the basic concept of sustainability and its three dimensions as well as getting an overview of a number of tools for analysis and synthesis of solutions that are sustainable throughout...... their life cycle and acquire the skills to use the most central of the tools. Furthermore, they should understand the engineer's role and responsibility in the development of sustainable solutions. Examples of learning outcomes are: Explain that each sustainability dimension is multifactorial and that trade...

Innovation in Extraterrestrial Service Systems - A Challenge for Service Science

Science.gov (United States)

Bergner, David

2010-01-01

This presentation was prepared at the invitation of Professor Yukio Ohsawa, Department of Systems Innovation, School of Engineering, The University of Tokyo, for delivery at the International Workshop on Innovating Service Systems, sponsored by the Japanese Society of Artificial Intelligence (JSAI) as part of the JSAI Internation Symposium on AI, 2010. It offers several challenges for Service Science and Service Innovation. the goal of the presentation is to stimulate thinking about how service systems viII evolve in the future, as human society advances from its terrestrial base toward a permanent presence in space. First we will consider the complexity of the International Space Station (ISS) as it is today, with particular emphasis of its research facilities, and focus on a current challenge - to maximize the utilization of ISS research facilities for the benefit of society. After briefly reviewing the basic principles of Service Science, we will discuss the potential application of Service Innovation methodology to this challenge. Then we viII consider how game-changing technologies - in particular Synthetic Biology - could accelerate the pace of sociocultural evolution and consequently, the progression of human society into space. We will use this provocative vision to advance thinking about how the emerging field of Service Science, Management, and Engineering (SSME) might help us anticipate and better handle the challenges of this inevitable evolutionary process.

Family stress and posttraumatic stress: the impact of military operations on military health care providers.

Science.gov (United States)

Gibbons, Susanne W; Barnett, Scott D; Hickling, Edward J

2012-08-01

This study uses data from the 2005 Department of Defense Survey of Health-Related Behaviors Among Military Personnel to examine relationships between family stress and posttraumatic stress symptoms across 4 subgroups of Operation Iraqi Freedom-deployed (i.e., war in Iraq) or Operation Enduring Freedom-deployed (i.e., war in Afghanistan) active-duty military service members. Results suggest the following: (a) the greatest positive correlation of family stressors with posttraumatic stress symptoms was found within the military health care officer group, and (b) these military health care officers differed in family stressors mediating posttraumatic stress with divorce and financial problems accounting for significant and unique portions of the variance. Implications for care of service members and their families are discussed. Published by Elsevier Inc.

Ontology-based Semantic Search Engine for Healthcare Services

OpenAIRE

Jotsna Molly Rajan; M. Deepa Lakshmi

2012-01-01

With the development of Web Services, the retrieval of relevant services has become a challenge. The keyword-based discovery mechanism using UDDI and WSDL is insufficient due to the retrievalof a large amount of irrelevant information. Also, keywords are insufficient in expressing semantic concepts since a single concept can be referred using syntactically different terms. Hence, service capabilities need to be manually analyzed, which lead to the development of the Semantic Web for automatic...

Engineering CHO cells with an oncogenic KIT improves cells growth, resilience to stress, and productivity.

Science.gov (United States)

Mahameed, Mohamed; Tirosh, Boaz

2017-11-01

An optimized biomanufacturing process in mammalian cells is contingent on the ability of the producing cells to reach high viable cell densities. In addition, at the peak of growth, cells need to continue producing the biological entity at a consistent quality. Thus, engineering cells with robust growth performance and resilience to variable stress conditions is highly desirable. The tyrosine kinase receptor, KIT, plays a key role in cell differentiation and the survival of several immune cell types. Its oncogenic mutant, D816V, endows cells with high proliferation capacity, and resistance to kinase inhibitors. Importantly, this onco-KIT mutant when introduced into various cell types is arrested in the endoplasmic reticulum in a constitutively active form. Here, we investigated the effect of oncogenic D816V KIT on the performance of CHO-K1 cells under conventional tissue culture growth settings and when adapted, to shaking conditions. The onco-KIT promoted global protein synthesis, elevated the expression of a secretable transgene, enhanced proliferation, and improved the overall titers of a model glycoprotein. Moreover, the expression of the onco-KIT endowed the cells with a remarkable resistance to various stress conditions. Our data suggest that the introduction of onco-KIT can serve as a strategy for improving glycoprotein biomanufacturing. Biotechnol. Bioeng. 2017;114: 2560-2570. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Management services

International Nuclear Information System (INIS)

Adkins, S.K.; Alford, D.R.; Barnette, A.B.

1979-01-01

The Management Services Section provides coordinated professional administrative services to the Fusion Energy Division (FED), allowing the work of technical professionals to be more fully concentrated in their areas of specialty. Services are provided in general administration, personnel, financial management, communications (including text and graphics generation), management information, library, safety, quality assurance, and nonprogrammatic engineering services. Highlights of the past year included adoption of the Procurement Module in the FED Management Information System (MIS) for use by the entire Laboratory, completion of the Personnel Module of the MIS, greatly increased personnel recruiting activity, and increased industrial subcontracting activity

Contact mechanics of reverse engineered distal humeral hemiarthroplasty implants.

Science.gov (United States)

Willing, Ryan; King, Graham J W; Johnson, James A

2015-11-26

Erosion of articular cartilage is a concern following distal humeral hemiarthroplasty, because native cartilage surfaces are placed in contact with stiff metallic implant components, which causes decreases in contact area and increases in contact stresses. Recently, reverse engineered implants have been proposed which are intended to promote more natural contact mechanics by reproducing the native bone or cartilage shape. In this study, finite element modeling is used in order to calculate changes in cartilage contact areas and stresses following distal humeral hemiarthroplasty with commercially available and reverse engineered implant designs. At the ulna, decreases in contact area were -34±3% (p=0.002), -27±1% (pengineered and cartilage reverse engineered designs, respectively. Peak contact stresses increased by 461±57% (p=0.008), 387±127% (p=0.229) and 165±16% (p=0.003). At the radius, decreases in contact area were -21±3% (p=0.013), -13±2% (p0.999), 241±32% (p=0.010) and 61±10% (p=0.021). Between the three different implant designs, the cartilage reverse engineered design yielded the largest contact areas and lowest contact stresses, but was still unable to reproduce the contact mechanics of the native joint. These findings align with a growing body of evidence indicating that although reverse engineered hemiarthroplasty implants can provide small improvements in contact mechanics when compared with commercially available designs, further optimization of shape and material properties is required in order reproduce native joint contact mechanics. Copyright © 2015 Elsevier Ltd. All rights reserved.

Recent advances in utilizing transcription factors to improve plant abiotic stress tolerance by transgenic technology

Directory of Open Access Journals (Sweden)

Hongyan eWang

2016-02-01

Full Text Available Agricultural production and quality are adversely affected by various abiotic stresses worldwide and this will be exacerbated by the deterioration of global climate. To feed a growing world population, it is very urgent to breed stress-tolerant crops with higher yields and improved qualities against multiple environmental stresses. Since conventional breeding approaches had marginal success due to the complexity of stress tolerance traits, the transgenic approach is now being popularly used to breed stress-tolerant crops. So identifying and characterizing the the critical genes involved in plant stress responses is an essential prerequisite for engineering stress-tolerant crops. Far beyond the manipulation of single functional gene, engineering certain regulatory genes has emerged as an effective strategy now for controlling the expression of many stress-responsive genes. Transcription factors (TFs are good candidates for genetic engineering to breed stress-tolerant crop because of their role as master regulators of many stress-responsive genes. Many TFs belonging to families AP2/EREBP, MYB, WRKY, NAC, bZIP have been found to be involved in various abiotic stresses and some TF genes have also been engineered to improve stress tolerance in model and crop plants. In this review, we take five large families of TFs as examples and review the recent progress of TFs involved in plant abiotic stress responses and their potential utilization to improve multiple stress tolerance of crops in the field conditions.

to salt stress

African Journals Online (AJOL)

Tony

2012-02-14

Feb 14, 2012 ... 3Inner Mongolia Industrial Engineering Research, Center of University for Castor, Tongliao 028042, ... strengthen and improve salt stress tolerance in plants. .... 2 µl cDNA, 1 µl each of 4 µM forward and reverse primer, 0.2 µl.

Enhancement of equipment services for Kozloduy NPP

International Nuclear Information System (INIS)

Schultz, Christophe

2013-01-01

Conclusion After 5 years of maintenance services, KNPP and AREVA have continuously intensified their partnership Close cooperation between KNPP, AREVA Local Office Engineers and OEM experts Involvement of sophisticated tools for diagnostics and condition monitoring Performance of engineering services and obsolescence evaluation Possibilities to perform equipment modernization of Electrical and IC equipment in future

National association of broadcasters engineering handbook NAB engineering handbook

CERN Document Server

Jones, Graham A; Osenkowsky, Thomas G; Williams, Edmund A

2013-01-01

The NAB Engineering Handbook provides detailed information on virtually every aspect of the broadcast chain, from news gathering, program production and postproduction through master control and distribution links to transmission, antennas, RF propagation, cable and satellite. Hot topics covered include HD Radio, HDTV, 2 GHz broadcast auxiliary services, EAS, workflow, metadata, digital asset management, advanced video and audio compression, audio and video over IP, and Internet broadcasting. A wide range of related topics that engineers and managers need to understand are also covered, includ

Public health engineering education in India: current scenario, opportunities and challenges.

Science.gov (United States)

Hussain, Mohammad Akhtar; Sharma, Kavya; Zodpey, Sanjay

2011-01-01

Public health engineering can play an important and significant role in solving environmental health issues. In order to confront public health challenges emerging out of environmental problems we need adequately trained public health engineers / environmental engineers. Considering the current burden of disease attributable to environmental factors and expansion in scope of applications of public health / environmental engineering science, it is essential to understand the present scenario of teaching, training and capacity building programs in these areas. Against this background the present research was carried out to know the current teaching and training programs in public health engineering and related disciplines in India and to understand the potential opportunities and challenges available. A systematic, predefined approach was used to collect and assemble the data related to various teaching and training programs in public health engineering / environmental engineering in India. Public health engineering / environmental engineering education and training in the country is mainly offered through engineering institutions, as pre-service and in-service training. Pre-service programs include diploma, degree (graduate) and post-graduate courses affiliated to various state technical boards, institutes and universities, whereas in-service training is mainly provided by Government of India recognized engineering and public health training institutes. Though trainees of these programs acquire skills related to engineering sciences, they significantly lack in public health skills. The teaching and training of public health engineering / environmental engineering is limited as a part of public health programs (MD Community Medicine, MPH, DPH) in India. There is need for developing teaching and training of public health engineering or environmental engineering as an interdisciplinary subject. Public health institutes can play an important and significant role in this

7 CFR 1753.18 - Engineer and architect contract closeout certifications.

Science.gov (United States)

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Engineer and architect contract closeout... PROCEDURES Engineering Services § 1753.18 Engineer and architect contract closeout certifications. A... accordance with accepted professional engineering and architectural practice, by the engineer or architect...

ENGINEERING OF UNIVERSITY INTELLIGENT LEARNING SYSTEMS

Directory of Open Access Journals (Sweden)

Vasiliy M. Trembach

2016-01-01

Full Text Available In the article issues of engineering intelligent tutoring systems of University with adaptation are considered. The article also dwells on some modern approaches to engineering of information systems. It shows the role of engineering e-learning devices (systems in system engineering. The article describes the basic principles of system engineering and these principles are expanded regarding to intelligent information systems. The structure of intelligent learning systems with adaptation of the individual learning environments based on services is represented in the article.

76 FR 64291 - Airworthiness Directives; General Electric Company (GE) Turbofan Engines

Science.gov (United States)

2011-10-18

... shop visit, but not later than 5,500 cycles-in-service (CIS) since the last engine shop visit where the... next engine shop visit, but not later than 5,500 cycles-in- service (CIS) since the last engine shop... than a ``CORRECT FLOW'' packing using paragraph 3.A.(1).(b) of the Accomplishment Instructions of SB No...

The end of meta search engines in Europe?

NARCIS (Netherlands)

Husovec, Martin

2015-01-01

The technology behind the meta search engines supports countless number of Internet services ranging from the price and quality comparison websites to more sophisticated traffic connection finders and general search engines like Google. Meta search engines generally increase market transparency,

Engineering Parameters in Bioreactor’s Design: A Critical Aspect in Tissue Engineering

Directory of Open Access Journals (Sweden)

Nasim Salehi-Nik

2013-01-01

Full Text Available Bioreactors are important inevitable part of any tissue engineering (TE strategy as they aid the construction of three-dimensional functional tissues. Since the ultimate aim of a bioreactor is to create a biological product, the engineering parameters, for example, internal and external mass transfer, fluid velocity, shear stress, electrical current distribution, and so forth, are worth to be thoroughly investigated. The effects of such engineering parameters on biological cultures have been addressed in only a few preceding studies. Furthermore, it would be highly inefficient to determine the optimal engineering parameters by trial and error method. A solution is provided by emerging modeling and computational tools and by analyzing oxygen, carbon dioxide, and nutrient and metabolism waste material transports, which can simulate and predict the experimental results. Discovering the optimal engineering parameters is crucial not only to reduce the cost and time of experiments, but also to enhance efficacy and functionality of the tissue construct. This review intends to provide an inclusive package of the engineering parameters together with their calculation procedure in addition to the modeling techniques in TE bioreactors.

Becoming a client of the Danish social service system increases stress in parents of disabled infants

DEFF Research Database (Denmark)

Graungaard, Anette Hauskov; Skov, Lotte; Andersen, John Sahl

2011-01-01

parents of a severely disabled young child during the first two years after the diagnosis of the child's disabilities. Data were analysed using grounded theory. RESULTS: We found that the encounter with the social services increased stress in the families. Parental expectations were not met, especially......INTRODUCTION: Parents of a young child with severe disabilities are facing a large range of new challenges; furthermore, most of these families have extended social needs regarding information, financial support, day care facilities, disability aids, etc. Many parents with disabled children have...

Influencing Student Beliefs about the Role of the Civil Engineer in Society

Science.gov (United States)

Nesbit, Susan E.; Sianchuk, Robert; Aleksejuniene, Jolanta; Kindiak, Rebecca

2012-01-01

This study suggests that community service learning experiences facilitate the reconstruction of civil engineering student beliefs about both the type of work performed by civil engineers and the broad impact of civil engineering knowledge. Further, the service learning experiences highlight for students 1) the importance of relationships between…

An Engineering Research Program for High School Science Teachers: Year Two Changes and Results

Science.gov (United States)

DeJong, Brian P.; Yelamarthi, Kumar; Kaya, Tolga

2016-01-01

The research experiences for teachers program at Central Michigan University was initiated to team in-service and pre-service teachers with undergraduate engineering students and engineering faculty, in an engineering research setting. During the six-week program, teachers learn engineering concepts and develop high-school instructional material…

Web-based Analysis Services Report

CERN Document Server

AUTHOR|(CDS)2108758; Canali, Luca; Grancher, Eric; Lamanna, Massimo; McCance, Gavin; Mato Vila, Pere; Piparo, Danilo; Moscicki, Jakub; Pace, Alberto; Brito Da Rocha, Ricardo; Simko, Tibor; Smith, Tim; Tejedor Saavedra, Enric; CERN. Geneva. IT Department

2017-01-01

Web-based services (cloud services) is an important trend to innovate end-user services while optimising the service operational costs. CERN users are constantly proposing new approaches (inspired from services existing on the web, tools used in education or other science or based on their experience in using existing computing services). In addition, industry and open source communities have recently made available a large number of powerful and attractive tools and platforms that enable large scale data processing. “Big Data” software stacks notably provide solutions for scalable storage, distributed compute and data analysis engines, data streaming, web-based interfaces (notebooks). Some of those platforms and tools, typically available as open source products, are experiencing a very fast adoption in industry and science such that they are becoming “de facto” references in several areas of data engineering, data science and machine learning. In parallel to users' requests, WLCG is considering to c...

Stresses in Circular Plates with Rigid Elements

Science.gov (United States)

Velikanov, N. L.; Koryagin, S. I.; Sharkov, O. V.

2018-05-01

Calculations of residual stress fields are carried out by numerical and static methods, using the flat cross-section hypothesis. The failure of metal when exposed to residual stresses is, in most cases, brittle. The presence in the engineering structures of rigid elements often leads to the crack initiation and structure failure. This is due to the fact that rigid elements under the influence of external stresses are stress concentrators. In addition, if these elements are fixed by welding, the residual welding stresses can lead to an increase in stress concentration and, ultimately, to failure. The development of design schemes for such structures is a very urgent task for complex technical systems. To determine the stresses in a circular plate with a welded circular rigid insert under the influence of an external load, one can use the solution of the plane stress problem for annular plates in polar coordinates. The polar coordinates of the points are the polar radius and the polar angle, and the stress state is determined by normal radial stresses, tangential and shearing stresses. The use of the above mentioned design schemes, formulas, will allow more accurate determination of residual stresses in annular welded structures. This will help to establish the most likely directions of failure and take measures at the stages of designing, manufacturing and repairing engineering structures to prevent these failures. However, it must be taken into account that the external load, the presence of insulation can lead to a change in the residual stress field.

Role of support services in Jaduguda mine

International Nuclear Information System (INIS)

Roy, Pinaki; Bannerjee, S.N.; Srinivasan, M.N.; Radhakrishnan, V.N.; Khanwalkar, S.D.

1991-01-01

This paper highlights the role of the supporting services which are divided into two main groups. Group A consists of services rendered by survey, planning, geology and physics sub-groups. The survey sub-group enforces the directional controls of the various lay-outs, the underground geology sub-group establishes the parameters for the development of drives and stop blocks while the physics section supplies the data regarding grade and thickness and exercises the ore quality control. The techniques evolved in giving these supports to the production system is described. Diamond drilling of holes through rock formation have been successfully used for transporting stowing sand and for draining accumulated water in the levels to respective sumps besides its normal use for underground exploration. Group B consists of engineering services. With limited mining machinery in the early sixties, the mechanical engineering services have taken significant strides for servicing today's equipments consisting of drill jumbos, hydro-pneumatic trackless loaders. Alimak raises climbers, diesel locomotives and mechanised ore transfer systems besides servicing the vital area of modern koepe system of friction winding where Jaduguda has already been a fore-runner in the country. Electrical engineering services basically maintain the electrical systems and equipments both permanent and extensions as mining areas progress in depth. Indigenisation of imported equipments and spares for them and modernisation in certain key areas has been attempted successfully over the years. Civil engineering services are mostly confined to strengthening support system for mine tunnels and construction of ore transfer passes for stopping. (author). 3 figs

Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Wastewater Discharge Facility; TOPICAL

International Nuclear Information System (INIS)

Ansley, Shannon L.

2002-01-01

The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering and Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist

Dynamic Mechanical and Nanofibrous Topological Combinatory Cues Designed for Periodontal Ligament Engineering.

Science.gov (United States)

Kim, Joong-Hyun; Kang, Min Sil; Eltohamy, Mohamed; Kim, Tae-Hyun; Kim, Hae-Won

2016-01-01

Complete reconstruction of damaged periodontal pockets, particularly regeneration of periodontal ligament (PDL) has been a significant challenge in dentistry. Tissue engineering approach utilizing PDL stem cells and scaffolding matrices offers great opportunity to this, and applying physical and mechanical cues mimicking native tissue conditions are of special importance. Here we approach to regenerate periodontal tissues by engineering PDL cells supported on a nanofibrous scaffold under a mechanical-stressed condition. PDL stem cells isolated from rats were seeded on an electrospun polycaprolactone/gelatin directionally-oriented nanofiber membrane and dynamic mechanical stress was applied to the cell/nanofiber construct, providing nanotopological and mechanical combined cues. Cells recognized the nanofiber orientation, aligning in parallel, and the mechanical stress increased the cell alignment. Importantly, the cells cultured on the oriented nanofiber combined with the mechanical stress produced significantly stimulated PDL specific markers, including periostin and tenascin with simultaneous down-regulation of osteogenesis, demonstrating the roles of topological and mechanical cues in altering phenotypic change in PDL cells. Tissue compatibility of the tissue-engineered constructs was confirmed in rat subcutaneous sites. Furthermore, in vivo regeneration of PDL and alveolar bone tissues was examined under the rat premaxillary periodontal defect models. The cell/nanofiber constructs engineered under mechanical stress showed sound integration into tissue defects and the regenerated bone volume and area were significantly improved. This study provides an effective tissue engineering approach for periodontal regeneration-culturing PDL stem cells with combinatory cues of oriented nanotopology and dynamic mechanical stretch.

Methods for FEM stress initialization based on stress functions, and application to a reservoir cross-section

OpenAIRE

Aliguer Piferrer, Ignasi; Rafels Ybern, Carles; Jaqués Adell, Irene; Carol, Ignacio; Prat Catalán, Pere; Lakashmikhanta, Ramasesha; Segura Segarra, José María

2013-01-01

An accurate description of the in-situ stress field in a rock mass is crucial in different areas of geo-engineering such as: underground excavations, hydrocarbon extraction, CO2 storage, hydraulic fracture etc. In this paper, a novel methodology to numerically generate the in-situ stress state within the Finite Elements framework is presented. It involves two steps: 1) an estimate of the stress components is given for integration point of the discretization, and 2) global equilibrium is verif...

Residual-stress measurements

Energy Technology Data Exchange (ETDEWEB)

Ezeilo, A N; Webster, G A [Imperial College, London (United Kingdom); Webster, P J [Salford Univ. (United Kingdom)

1997-04-01

Because neutrons can penetrate distances of up to 50 mm in most engineering materials, this makes them unique for establishing residual-stress distributions non-destructively. D1A is particularly suited for through-surface measurements as it does not suffer from instrumental surface aberrations commonly found on multidetector instruments, while D20 is best for fast internal-strain scanning. Two examples for residual-stress measurements in a shot-peened material, and in a weld are presented to demonstrate the attractive features of both instruments. (author).

KEK Engineering Department -activity report FY 2003

International Nuclear Information System (INIS)

2005-03-01

This report includes all kinds of activities of the Engineering Department of KEK from 2002 to 2003 FY. There are fourteen chapters, which contain KEK Prize for engineering, KEK meeting of engineering technologies, Engineering Seminar, COACK (Component Oriented Advanced Control Kernel) for cooperation R and D project, Forum on engineering technologies from 1998 to 2003 FY, Engineering Department Symposium, service trainings, Engineering Department research study, English training, training for professional worker, training for technical expert, report on joint training for technical expert, training for middle school students, and the Engineering Department system and the main events from 1971 to 2003. (S.Y. )

Stress analysis of the tokamak engineering test breeder blanket

International Nuclear Information System (INIS)

Huang Zhongqi

1992-01-01

The design features of the hybrid reactor blanket and main parameters are presented. The stress analysis is performed by using computer codes SAP5p and SAP6 with the three kinds of blanket module loadings, i.e, the pressure of coolant, the blanket weight and the thermal loading. Numerical calculation results indicate that the stresses of the blanket are smaller than the allowable ones of the material, the blanket design is therefore reasonable

Image decomposition as a tool for validating stress analysis models

Directory of Open Access Journals (Sweden)

Mottershead J.

2010-06-01

Full Text Available It is good practice to validate analytical and numerical models used in stress analysis for engineering design by comparison with measurements obtained from real components either in-service or in the laboratory. In reality, this critical step is often neglected or reduced to placing a single strain gage at the predicted hot-spot of stress. Modern techniques of optical analysis allow full-field maps of displacement, strain and, or stress to be obtained from real components with relative ease and at modest cost. However, validations continued to be performed only at predicted and, or observed hot-spots and most of the wealth of data is ignored. It is proposed that image decomposition methods, commonly employed in techniques such as fingerprinting and iris recognition, can be employed to validate stress analysis models by comparing all of the key features in the data from the experiment and the model. Image decomposition techniques such as Zernike moments and Fourier transforms have been used to decompose full-field distributions for strain generated from optical techniques such as digital image correlation and thermoelastic stress analysis as well as from analytical and numerical models by treating the strain distributions as images. The result of the decomposition is 101 to 102 image descriptors instead of the 105 or 106 pixels in the original data. As a consequence, it is relatively easy to make a statistical comparison of the image descriptors from the experiment and from the analytical/numerical model and to provide a quantitative assessment of the stress analysis.

Engineering computation of structures the finite element method

CERN Document Server

Neto, Maria Augusta; Roseiro, Luis; Cirne, José; Leal, Rogério

2015-01-01

This book presents theories and the main useful techniques of the Finite Element Method (FEM), with an introduction to FEM and many case studies of its use in engineering practice. It supports engineers and students to solve primarily linear problems in mechanical engineering, with a main focus on static and dynamic structural problems. Readers of this text are encouraged to discover the proper relationship between theory and practice, within the finite element method: Practice without theory is blind, but theory without practice is sterile. Beginning with elasticity basic concepts and the classical theories of stressed materials, the work goes on to apply the relationship between forces, displacements, stresses and strains on the process of modeling, simulating and designing engineered technical systems. Chapters discuss the finite element equations for static, eigenvalue analysis, as well as transient analyses. Students and practitioners using commercial FEM software will find this book very helpful. It us...

Heat Transfer Analysis of a Diesel Engine Head

Directory of Open Access Journals (Sweden)

M. Diviš

2003-01-01

Full Text Available This paper documents the research carried out at the Josef Božek Research Center of Engine and Automotive Engineering dealing with extended numerical stress/deformation analyses of engines parts loaded by heat and mechanical forces. It contains a detailed description of a C/28 series diesel engine head FE model and a discussion of heat transfer analysis tunning and results. The head model consisting of several parts allows a description of contact interaction in both thermal and mechanical analysis.

Stress Distribution in Graded Cellular Materials Under Dynamic Compression

Directory of Open Access Journals (Sweden)

Peng Wang

Full Text Available Abstract Dynamic compression behaviors of density-homogeneous and density-graded irregular honeycombs are investigated using cell-based finite element models under a constant-velocity impact scenario. A method based on the cross-sectional engineering stress is developed to obtain the one-dimensional stress distribution along the loading direction in a cellular specimen. The cross-sectional engineering stress is contributed by two parts: the node-transitive stress and the contact-induced stress, which are caused by the nodal force and the contact of cell walls, respectively. It is found that the contact-induced stress is dominant for the significantly enhanced stress behind the shock front. The stress enhancement and the compaction wave propagation can be observed through the stress distributions in honeycombs under high-velocity compression. The single and double compaction wave modes are observed directly from the stress distributions. Theoretical analysis of the compaction wave propagation in the density-graded honeycombs based on the R-PH (rigid-plastic hardening idealization is carried out and verified by the numerical simulations. It is found that stress distribution in cellular materials and the compaction wave propagation characteristics under dynamic compression can be approximately predicted by the R-PH shock model.

Requirements engineering: foundation for software quality

NARCIS (Netherlands)

Daneva, Maia; Pastor, Oscar

2016-01-01

Welcome to the proceedings of the 22nd edition of REFSQ: the International Working Conference on Requirements Engineering – Foundation for Software Quality! Requirements engineering (RE) has been recognized as a critical factor that impacts the quality of software, systems, and services. Since the

40 CFR 90.427 - Catalyst thermal stress resistance evaluation.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Catalyst thermal stress resistance... Gaseous Exhaust Test Procedures § 90.427 Catalyst thermal stress resistance evaluation. (a) The purpose of... catalyst conversion efficiency for Phase 1 engines. The thermal stress is imposed on the test catalyst by...

Feature-based engineering of compensations in web service environment

DEFF Research Database (Denmark)

Schaefer, Michael; Dolog, Peter

2009-01-01

In this paper, we introduce a product line approach for developing Web services with extended compensation capabilities. We adopt a feature modelling approach in order to describe variable and common compensation properties of Web service variants, as well as service consumer application...

40 CFR 90.1204 - Maintenance, aging and testing of engines.

Science.gov (United States)

2010-07-01

... engines. 90.1204 Section 90.1204 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... sample unless that engine experiences catastrophic mechanical failure or safety concerns requiring major... for engines with the amount of service and age of the test engine. (d) After aging each engine to at...

Estimation of stress intensity factors for circumferential cracked pipes under welding residual stress filed

International Nuclear Information System (INIS)

Oh, Chang Young; Kim, Yun Jae; Oh, Young Jin; Song, Tae Kwang; Kim, Yong Beum; Oh, Young Jin; Song, Tae Kwang; Kim, Yong Beum

2012-01-01

Recently, stress corrosion cracking(SCC) have been found in dissimilar metal welds of nozzles in some pressurized water reactors and on low carbon stainless steel piping systems of boiling water reactors. The important factor of SCC is the residual stress field caused by weld. For the evaluation of crack growth analysis due to SCC, stress intensity factor under a residual stress field should be estimated. Several solutions for stress intensity factor under residual stress field were recommended in flaw assessment codes such as the American Society of Mechanical Engineers (ASME) Section XI, R6, American Petroleum Institute (API579). Some relevant works have been studied. Dong et al. evaluated stress intensity factors in welded structures. Miyazaki et al. estimated stress intensity factors of surface crack in simple stress fields. This paper presents a simple method to estimate stress intensity factors in welding residual stress field. For general application, results of structure integrity assessment codes KI solutions were compared Finite element analyses of welding simulation and cracked pipes are described. Comparison results of KI solutions and proposed simplified solution are presented in the works

Teaching Mathematics to Civil Engineers

Science.gov (United States)

Sharp, J. J.; Moore, E.

1977-01-01

This paper outlines a technique for teaching a rigorous course in calculus and differential equations which stresses applicability of the mathematics to problems in civil engineering. The method involves integration of subject matter and team teaching. (SD)

Mechanical engineering science in SI units

CERN Document Server

Gwyther, J L; Williams, G

1970-01-01

0.1 Mechanical Engineering Science covers various fundamental concepts that are essential in the practice of mechanical engineering. The title is comprised of 19 chapters that detail various topics, including chemical and physical laws. The coverage of the book includes Newtonian laws, mechanical energy, friction, stress, and gravity. The text also discusses the chemical aspects of mechanical engineering, which include gas laws, states of matter, and fuel combustion. The last chapter tackles concerns in laboratory experiments. The book will be of great use to students of mechanical eng

Blueprint template support for engineering cloud-based services

NARCIS (Netherlands)

Nguyen, D.K.; Lelli, F.; Taher, Y.; Parkin, M.S.; Papazoglou, M.; van den Heuvel, W.J.A.M.; Abramowicz, W.; Martín Llorente, I.; Surridge, M.; Zisman, A.; Vayssière, J.

2011-01-01

Current cloud-based service offerings are often provided as one-size-fits-all solutions and give little or no room for customization. This limits the ability for application developers to pick and choose offerings from multiple software, platform, infrastructure service providers and configure them

Foundations of Blueprint for Cloud-based Service Engineering

NARCIS (Netherlands)

Nguyen, D.K.

2011-01-01

Current cloud-based service offerings are often provided as one-size-fits-all solution and give little or no room for customization. This limits the ability for application developers to pick and choose offerings from multiple software, platform and infrastructure service providers and configure

Injector tip for an internal combustion engine

Science.gov (United States)

Shyu, Tsu Pin; Ye, Wen

2003-05-20

This invention relates to a the tip structure of a fuel injector as used in a internal combustion engine. Internal combustion engines using Homogeneous Charge Compression Ignition (HCCI) technology require a tip structure that directs fuel spray in a downward direction. This requirement necessitates a tip design that is capable of withstanding mechanical stresses associated with the design.

Engineering change management report 2011

DEFF Research Database (Denmark)

Maier, Anja; Langer, Stefan

Changes or modifications have always been a fundamental part of product- and service design, yet they are often costly and potentially decrease overall development efficiency and effectiveness. How Danish manufacturing firms are able to improve engineering change management practice is a decisive......, challenges, and strategies for improved engineering change management of more than 90 engineering firms from different industry sectors and sizes in Denmark. In particular, the report presents an overview of current practice of engineering change management in Denmark, shows the extent to which engineering...... implementation, with software use in comparison being surprisingly low. The biggest problems listed range from engineering change process support to internal and external communication and the need for company-internal awareness and competence training for better engineering change management. The biggest need...

7 CFR 1724.20 - Borrowers' requirements-architectural services.

Science.gov (United States)

2010-01-01

... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Architectural Services § 1724.20 Borrowers' requirements—architectural services... 7 Agriculture 11 2010-01-01 2010-01-01 false Borrowers' requirements-architectural services. 1724...

Monitoring fuel consumption for reciprocating engines

International Nuclear Information System (INIS)

Zebelean, D.C.

1991-01-01

This paper reports that Northwest Pipeline Corp. has experienced substantial fuel cost savings through a program that provides continuous monitoring of predicted consumption against actual usage for reciprocating engines. With the continuous monitoring program, the company can gauge specific fuel consumption, flag inefficient engines and determine possible problems with computer software or hardware used to measure engine operations. The plan was initiated as part of an overall effort to reduce pipe line operating cost to remain market competitive by reducing cost of services to the customer. One of the factors in determining Northwest Pipeline's cost of service is the cost of fueling engines to transport natural gas. In 1990, Northwest consumed approximately 9,600,000 MMBtu in engine fuel. Fuel gas always has been accounted for and measured. However, the thermal efficiency of the fuel gas consumed was never quantified. Engineering management set a goal in 1989 to audit fuel consumption monthly on the basis of actual fuel consumed compared to the manufacturer's predicted consumption curves. The fuel consumption comparison between actual consumption with manufacturer's predicted consumption decreased 4% in six months after the first report was published. Unbalanced engines, faulty spark plugs, fuel valves, engines requiring overhauls, and even computer software and hardware problems were found, based on this report. Total decrease in the comparison of 4% was not all realized. Approximately 1.5% of the decrease was due to revising the manufacturer's fuel consumption curves to correctly predict Northwest's vintage of engine

Role of testing in requalifying Transamerica Delaval, Inc., engines for nuclear service

International Nuclear Information System (INIS)

Nesbitt, J.F.; Dingee, D.A.; Laity, W.W.

1985-03-01

This paper discusses the role of testing in requalifying Transamerica Delaval, Inc. (TDI) diesel generators for use as emergency standby power sources at nuclear power plants. ''Lead'' engine tests (to confirm the design adequacy of key engine components under conditions that could induce high-cycle fatigue) and ''following'' engine tests (for engines of the same model and equipped with the same components as the ''lead'' engine) have been conducted at several nuclear power plants. The tests conducted by Duke Power Company (Catawba Nuclear Station Unit 1) and Long Island Lighting Company (Shoreham Nuclear Power Station Unit 1) are discussed. 2 refs

SEDflume - High Shear Stress Flume

Data.gov (United States)

Federal Laboratory Consortium — The U.S. Army Corps of Engineers High Shear Stress flume (SEDflume) is designed for estimating erosion rates of fine-grained and mixed fine/coarse grained sediments...

The EBI search engine: EBI search as a service-making biological data accessible for all.

Science.gov (United States)

Park, Young M; Squizzato, Silvano; Buso, Nicola; Gur, Tamer; Lopez, Rodrigo

2017-07-03

We present an update of the EBI Search engine, an easy-to-use fast text search and indexing system with powerful data navigation and retrieval capabilities. The interconnectivity that exists between data resources at EMBL-EBI provides easy, quick and precise navigation and a better understanding of the relationship between different data types that include nucleotide and protein sequences, genes, gene products, proteins, protein domains, protein families, enzymes and macromolecular structures, as well as the life science literature. EBI Search provides a powerful RESTful API that enables its integration into third-party portals, thus providing 'Search as a Service' capabilities, which are the main topic of this article. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

76 FR 61137 - Hours of Service of Drivers: Western Pilot Service Application for Exemption

Science.gov (United States)

2011-10-03

... with various government agencies such as the U. S. Forest Service, Bureau of Land Management, and the... that these drivers operate in a relaxing, stress-free environment. A copy of the Western Pilot Service...

At Age 100, Chemical Engineering Education Faces Changing World.

Science.gov (United States)

Krieger, James

1988-01-01

Stresses the need for chemical engineering education to keep abreast of current needs. Explores the need for global economics, marketing strategy, product differentiation, and patent law in the curriculum. Questions the abilities of current chemical engineering graduate students in those areas. (MVL)

Downsizing assessment of automotive Stirling engines

Science.gov (United States)

Knoll, R. H.; Tew, R. C., Jr.; Klann, J. L.

1983-01-01

A 67 kW (90 hp) Stirling engine design, sized for use in a 1984 1440 kg (3170 lb) automobile was the focal point for developing automotive Stirling engine technology. Since recent trends are towards lighter vehicles, an assessment was made of the applicability of the Stirling technology being developed for smaller, lower power engines. Using both the Philips scaling laws and a Lewis Research Center (Lewis) Stirling engine performance code, dimensional and performance characteristics were determined for a 26 kW (35 hp) and a 37 kW (50 hp) engine for use in a nominal 907 kg (2000 lb) vehicle. Key engine elements were sized and stressed and mechanical layouts were made to ensure mechanical fit and integrity of the engines. Fuel economy estimates indicated that the Stirling engine would maintain a 30 to 45 percent fuel economy advantage comparable spark ignition and diesel powered vehicles in the 1984 period.

Home | Society of Women Engineers

Science.gov (United States)

Public Policy sweSwag History International Member Services Event Funding I AM WITH SWE Governance img a fellow woman engineer's growth and success. Donate Now img Join Join SWE Today! I AM WITH SWE When Engineers 05/07/18 Year of the Woman - Back to the Future in 2018? 04/27/18 SWE Magazine: Shaping Tomorrow's

'Holistic Engineers' Observed through the Practice Looking-Glass

DEFF Research Database (Denmark)

Buch, Anders

2013-01-01

Many observers, policy makers, educationalists and industry representatives have called for reforms of engineering education that stress more ‘holistic’ and less disciplinary approaches to engineering problem solving (Buch 2012). And some reform initiatives within engineering education in Denmark...... and collaborative work space it turned out to be a forum for reactive and coordinative problem solving....... have indeed perused these ambitions. Problem based learning (PBL) has been implemented in engineering education at Aalborg University (Graff & Kolmos 2003) and a progressive ‘Design and Innovation’ engineering programme have been launched at the Technical University of Denmark (Jørgensen & Valderrama...

Evaluating a Service-Oriented Architecture

Science.gov (United States)

2007-09-01

See the description on page 13. SaaS Software as a service ( SaaS ) is a software delivery model where customers don’t own a copy of the application... serviceability REST Representational State Transfer RIA rich internet application RPC remote procedure call SaaS software as a service SAML Security...Evaluating a Service -Oriented Architecture Phil Bianco, Software Engineering Institute Rick Kotermanski, Summa Technologies Paulo Merson

Role of hydrogen in stress corrosion cracking

International Nuclear Information System (INIS)

Louthan, M.R. Jr.

1975-01-01

Hydrogen embrittlement has been postulated as a cause of stress corrosion cracking in numerous alloy systems. Such an interrelationship is useful in design considerations because it permits the designer and working engineer to relate the literature from both fields to a potential environmental compatibility problem. The role of hydrogen in stress corrosion of high strength steels is described along with techniques for minimizing the susceptibility to hydrogen stress cracking. (U.S.)

Adiabatic Wankel type rotary engine

Science.gov (United States)

Kamo, R.; Badgley, P.; Doup, D.

1988-01-01

This SBIR Phase program accomplished the objective of advancing the technology of the Wankel type rotary engine for aircraft applications through the use of adiabatic engine technology. Based on the results of this program, technology is in place to provide a rotor and side and intermediate housings with thermal barrier coatings. A detailed cycle analysis of the NASA 1007R Direct Injection Stratified Charge (DISC) rotary engine was performed which concluded that applying thermal barrier coatings to the rotor should be successful and that it was unlikely that the rotor housing could be successfully run with thermal barrier coatings as the thermal stresses were extensive.

7 CFR 1780.54 - Technical services.

Science.gov (United States)

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Technical services. 1780.54 Section 1780.54 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF..., Constructing and Inspections § 1780.54 Technical services. Owners are responsible for providing the engineering...

Residual stresses and stress corrosion effects in cast steel nuclear waste overpacks

International Nuclear Information System (INIS)

Attinger, R.O.; Mercier, O.; Knecht, B.; Rosselet, A.; Simpson, J.P.

1991-01-01

In the concepts for final disposal of high-level radioactive waste in Switzerland, one engineered barrier consists of an overpack made out of cast steel GS-40. Whenever tensile stresses are expected in the overpack, the issue of stress corrosion cracking must be expected. A low-strength steel was chosen to minimize potential problems associated with stress corrosion cracking. A series of measurements on stress corrosion cracking under the conditions as expected in the repository confirmed that the corrosion allowance of 50 mm used for the design of the reference overpack is sufficient over the 1000 years design lifetime. Tensile stresses are introduced by the welding process when the overpack is closed. For a multipass welding, the evolution of deformations, strains and stresses were determined in a finite-element calculation. Assuming an elastic-plastic material behavior without creep, the residual stresses are high; considering creep would reduce them. A series of creep tests revealed that the initial creep rate is important for cast steel already at 400deg C. (orig.)

Polycrystalline deformation in engineering materials: Insights from neutron diffraction during loading

International Nuclear Information System (INIS)

Bourke, M.; Brown, D.

1999-01-01

In-situ measurements using the non-destructive penetration of neutrons are commonplace at neutron sources and permit investigations within environmental chambers at stress, pressure, or temperature. Many of these studies explore the microstructural performance of engineering materials under service conditions. For example, by measuring phase strains during the application of static loads, neutron diffraction provides insight into failure, relaxation and load transfer mechanisms. Mechanical loading of a sample on a neutron spectrometer is usually performed with a customized load frame (small enough to fit into the typically limited available space) with the load axis horizontal. Diffraction data are recorded using detectors that surround the sample and strains are determined from changes in the measured interplanar lattice spacings in directions determined by the scattering geometry. These elastic strains indicate how the applied stress is shared throughout the microstructure. During a test, conventional strain gauges also record the macroscopic strain; that is the sum of the plastic and elastic contributions. Beyond yield the plastic contribution usually dominates the total strain but the elastic phase strains respond to the applied stress at any given load and provide clues about which phase (in a multiphase system) or which crystal orientation (in a single phase polycrystal) dictates failure

Evaluating technology service options.

Science.gov (United States)

Blumberg, D F

1997-05-01

Four service and support options are available to healthcare organizations for maintaining their growth arsenals of medical and information technology. These options include maintaining and servicing all equipment using a facility-based biomedical engineering and MIS service department; using a combination of facility-based service and subcontracted service; expanding facility-based biomedical and MIS service departments to provide service to other healthcare organizations to achieve economies of scale; and outsourcing all maintenance, repair, and technical support services. Independent service companies and original equipment manufacturers (OEMs) are offering healthcare organizations a wider array of service and support capabilities than ever before. However, some health systems have successfully developed their own independent service organizations to take care of their own--and other healthcare organizations'--service and support needs.

Comparing Service Delivery Models for Children with Developmental Delays in Canada: Adaptive and Maladaptive Behaviours, Parental Perceptions of Stress and of Care

Science.gov (United States)

Sladeczek, Ingrid E.; Fontil, Laura; Miodrag, Nancy; Karagiannakis, Anastasia; Amar, Daniel; Amos, Janet

2017-01-01

This study compares two service delivery models (community-based and centre-based), examining them in light of children's adaptive and maladaptive behaviours, and parental perceptions of stress and of care. More specifically, parents of 96 children with developmental delays assessed their children's adaptive and maladaptive behaviours and rated…

Shrubs as ecosystem engineers across an environmental gradient: effects on species richness and exotic plant invasion.

Science.gov (United States)

Kleinhesselink, Andrew R; Magnoli, Susan M; Cushman, J Hall

2014-08-01

Ecosystem-engineering plants modify the physical environment and can increase species diversity and exotic species invasion. At the individual level, the effects of ecosystem engineers on other plants often become more positive in stressful environments. In this study, we investigated whether the community-level effects of ecosystem engineers also become stronger in more stressful environments. Using comparative and experimental approaches, we assessed the ability of a native shrub (Ericameria ericoides) to act as an ecosystem engineer across a stress gradient in a coastal dune in northern California, USA. We found increased coarse organic matter and lower wind speeds within shrub patches. Growth of a dominant invasive grass (Bromus diandrus) was facilitated both by aboveground shrub biomass and by growing in soil taken from shrub patches. Experimental removal of shrubs negatively affected species most associated with shrubs and positively affected species most often found outside of shrubs. Counter to the stress-gradient hypothesis, the effects of shrubs on the physical environment and individual plant growth did not increase across the established stress gradient at this site. At the community level, shrub patches increased beta diversity, and contained greater rarified richness and exotic plant cover than shrub-free patches. Shrub effects on rarified richness increased with environmental stress, but effects on exotic cover and beta diversity did not. Our study provides evidence for the community-level effects of shrubs as ecosystem engineers in this system, but shows that these effects do not necessarily become stronger in more stressful environments.

48 CFR 2936.602 - Selection of firms for architect-engineer contracts.

Science.gov (United States)

2010-10-01

... architect-engineer contracts. 2936.602 Section 2936.602 Federal Acquisition Regulations System DEPARTMENT OF LABOR GENERAL CONTRACTING REQUIREMENTS CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 2936.602 Selection of firms for architect-engineer contracts. ...

Stress engineering for the design of morphotropic phase boundary in piezoelectric material