Sample records for stream-bottom sediments nyanza

  1. Assessment of stream bottom sediment quality in the vicinity of the Caldas uranium mine

    Oliveira, Priscila E.S. de, E-mail: [Universidade Federal de Ouro Preto (ProAmb/UFOP), Ouro Preto, MG (Brazil). Programa de Pos-Graduacao em Engenharia Ambiental; Filho, Carlos A.C.; Moreira, Rubens M.; Ramos, Maria E.A.F.; Dutra, Pedro H.; Ferreira, Vinicius V.M., E-mail: [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte (Brazil); Silva, Nivaldo C., E-mail: [Comissao Nacional de Energia Nuclear (LAPOC/CNEN-MG), Pocos de Caldas, MG (Brazil). Laboratorio de Pocos de Caldas


    An evaluation of the quality of stream bottom sediments was performed in the surroundings of the Caldas Uranium Mining and Milling Facilities (UMMF), sited on Pocos de Caldas Plateau (southeastern Brazil), to verify whether the sediments in the water bodies downstream the plant, were impacted by effluents from a large waste rock pile, named Waste Rock Pile 4 (WRP4), and from the Tailings Dam (TD). In order to perform the research, twelve sampling stations were established in the watersheds around Caldas UMMF: the Soberbo creek, the Consulta brook, and the Taquari river. One of the stations was located inside the Bacia Nestor Figueiredo, a retention pond that receives effluents from WRP4, and another in a settling tank (D2) for radium, which receives the effluents from TD. A monitoring scheme has been developed, comprising four sampling campaigns in 2010 and 2011, and the samples were analyzed for selected metals-metalloids and radionuclides, using Inductively Coupled Plasma Mass Spectrometry (ICP-MS), Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), Ultraviolet-Visible (UV-Vis) Spectroscopy and Gamma-ray Spectrometry. The results suggest that effluents discharged from retention ponds to watercourses, causing an increase in the concentration of As, B, Ba, Cr, Mo, Mn, Pb, Zn, {sup 238}U, {sup 232}Th, {sup 226}Ra, {sup 228}Ra and {sup 210}Pb in sediments. Detailed investigation in sub-superficial layers is recommended at these locations to evaluate the need of implementing mitigation actions such as lining and constructing hydraulic barriers downstream the ponds. Actually, the UTM/Caldas operator is already implementing control measures. (author)

  2. Chromium Distribution and Spatial Variations in the Finer Sediment Grain Size Fraction and Unfractioned Surficial Sediments on Nyanza Gulf, of Lake Victoria (East Africa

    Job Mwamburi


    Full Text Available Surficial sediments collected from the Nyanza Gulf of Lake Victoria (East Africa were used to determine spatial concentrations of Cr and determine differences in contents of the unfractioned (whole sediment and the finer grain size sediments, establishing any changes in Cr enrichment and potential ecological risks using sediment quality guidelines. A single pollution index was also used to evaluate level of Cr contamination. The spatial mean Cr contents in the <63 µm (silt-clay fraction were found to be significantly lower than those in the unfractioned sediments, but with a strong linear positive correlation. The study results show decreasing spatial amounts of Cr in surficial sediments of the Nyanza Gulf, when compared to a study done 20 years earlier. However, the 95% confidence limits of the overall mean Cr in unfractioned sediments exceed the threshold effect concentration (TEC, indicating the potential for Cr remobilization from sediments. In general the sediment enrichment is evidence of possible dominance of lithogenous sources of Cr in the surface lake sediments, with potential anthropogenic sources from the drainage system and nearshore urban areas. The sediments are unpolluted with respect to geoaccumulation index, and sediment enrichment factors suggest a minor to moderate enrichment of Cr in surficial sediments of three sites around the Nyanza Gulf zones and around the river mouth in the main lake.

  3. Nutritional aspects of rice cultivation in Nyanza province, Kenya

    Niemeijer, R.


    Leiden [etc.] : African Studies Centre [etc.] (FNSP Report, no. 14), p. 156, 1985.Based on a survey conducted in 1984, the authors discuss the nutritional conditions prevailing among farming households engaged in irrigated rice cultivation in the Kano plain, Nyanza Province, Kenya. The survey covere

  4. Factors affecting food chain transfer of mercury in the vicinity of the Nyanza site, Sudbury River, Massachusetts

    Haines, T.A.; May, T.W.; Finlayson, R.T.; Mierzykowski, S.E.


    The influence of the Nyanza Chemical Waste Dump Superfund Site on the Sudbury River, Massachusetts, was assessed by analysis of sediment, fish prey organisms, and predator fish from four locations in the river system. Whitehall Reservoir is an impoundment upstream of the site, and Reservoir #2 is an impoundment downstream of the site. Cedar Street is a flowing reach upstream of the site, and Sherman Bridge is a flowing reach downstream of the site. Collections of material for analysis were made three times, in May, July, and October. Sediment was analyzed for acid-volatile sulfide (AVS), simultaneously-extracted (SEM) metals (As, Cd, Cr, Hg, Pb, Sb, Zn), and total recoverable Hg. The dominant predatory fish species collected at all sites, largemouth bass (Micropterus salmoides), was analyzed for the same suite of metals as sediment. Analysis of stomach contents of bass identified small fish (yellow perch Perca flavescens, bluegill Lepomis macrochirus, and pumpkinseed Lepomis gibbosus), crayfish, and dragonfly larvae as the dominant prey organisms. Samples of the prey were collected from the same locations and at the same times as predator fish, and were analyzed for total and methyl mercury. Results of AVS and SEM analyses indicated that sediments were not toxic to aquatic invertebrates at any site. The SEM concentrations of As, Cd, and Cr were significantly higher at Reservoir #2 than at the reference sites, and SEM As and Cd were significantly higher at Sherman Bridge than at Cedar St. Sediment total Hg was elevated only at Reservoir #2. Hg was higher at site-influenced locations in all fish species except brown bullhead (Ameiurus nebulosus). Cd was higher in bluegill, black crappie (Pomoxis nigromaculatus), and brown bullhead, and Cr was higher in largemouth bass fillet samples but not in whole-body samples. There were no seasonal differences in sediment or prey organism metals, but some metals in some fish species did vary over time in an inconsistent manner

  5. Community unit performance: factors associated with childhood diarrhea and appropriate treatment in Nyanza Province, Kenya.

    Kawakatsu, Yoshito; Tanaka, Junichi; Ogawa, Kazuya; Ogendo, Kenneth; Honda, Sumihisa


    The government of Kenya launched its community health strategy in 2006 to improve certain aspects of its community health program. Under the strategy, community units (CUs) were established as level one of the Kenyan health system. A core member at this level is the community health worker (CHW). The objective of this study was to assess the relationship among the performance of the CUs, the prevalence of childhood diarrhea and appropriate treatment for it by controlling individual and community-level factors. The main dataset used in this study was the 2011 Nyanza Province county-based Multiple Indicator Cluster Survey (MICS). In addition, based on the list of community units in Nyanza Province, Kenya, we identified the area's CUs and their performance. MICS data and data on CUs were merged using sub-location names. There were 17 individual and two community-level independent variables in this study. Bivariate analysis and a multilevel logistic regression were performed. Factors significantly associated with a lower prevalence of diarrhea among children under five were the child's increasing age, middle-aged household heads, children who received more attention, water treatment and rural versus urban area residence, while male children and highly performing CUs were significantly associated with a higher prevalence of diarrhea. In addition, middle wealth index, severity of diarrhea and middle- and high-CU performance were significantly associated with appropriate treatment for childhood diarrhea. Although this study found that children living in areas of high CU performance were more likely to have diarrhea, these areas would have been identified as being more at risk for diarrhea prevalence and other health concerns, prioritized for the establishment of a CU and allocated more resources to improve the performance of CUs. A higher CU performance was significantly associated with the appropriate treatment. It was suggested that CHWs could have a positive effect on

  6. Use of geospatial modeling to predict Schistosoma mansoni prevalence in Nyanza Province, Kenya.

    Dana M Woodhall

    Full Text Available BACKGROUND: Schistosomiasis, a parasitic disease that affects over 200 million people, can lead to significant morbidity and mortality; distribution of single dose preventative chemotherapy significantly reduces disease burden. Implementation of control programs is dictated by disease prevalence rates, which are determined by costly and labor intensive screening of stool samples. Because ecological and human factors are known to contribute to the focal distribution of schistosomiasis, we sought to determine if specific environmental and geographic factors could be used to accurately predict Schistosoma mansoni prevalence in Nyanza Province, Kenya. METHODOLOGY/PRINCIPAL FINDINGS: A spatial mixed model was fit to assess associations with S. mansoni prevalence in schools. Data on S. mansoni prevalence and GPS location of the school were obtained from 457 primary schools. Environmental and geographic data layers were obtained from publicly available sources. Spatial models were constructed using ArcGIS 10 and R 2.13.0. Lower S.mansoni prevalence was associated with further distance (km to Lake Victoria, higher day land surface temperature (LST, and higher monthly rainfall totals. Altitude, night LST, human influence index, normalized difference vegetation index, soil pH, soil texture, soil bulk density, soil water capacity, population, and land use variables were not significantly associated with S. mansoni prevalence. CONCLUSIONS: Our model suggests that there are specific environmental and geographic factors that influence S. mansoni prevalence rates in Nyanza Province, Kenya. Validation and use of schistosomiasis prevalence maps will allow control programs to plan and prioritize efficient control campaigns to decrease schistosomiasis burden.

  7. Women's roles in voluntary medical male circumcision in Nyanza Province, Kenya.

    Michele Lanham

    Full Text Available Women are an important audience for voluntary medical male circumcision (VMMC communication messages so that they know that VMMC provides only partial protection against HIV. They may also be able to influence their male partners to get circumcised and practice other HIV protective measures after VMMC. This study was conducted in two phases of qualitative data collection. Phase 1 used in-depth interviews to explore women's understanding of partial protection and their role in VMMC. Phase 2 built on the findings from the Phase 1, using focus groups to test VMMC communication messages currently used in Nyanza Province and to further explore women's roles in VMMC. Sixty-four sexually active women between the ages of 18 and 35 participated. In Phase 1, all women said they had heard of partial protection, though some were not able to elaborate on what the concept means. When women in Phase 2 were exposed to messages about partial protection, however, participants understood the messages well and were able to identify the main points. In Phases 1 and 2, many participants said that they had discussed VMMC with their partner, and for several, it was a joint decision for the man to go for VMMC. These findings suggest that current VMMC messaging is reaching women, though communications could more effectively target women to increase their ability to communicate about partial HIV protection from VMMC. Also, women seem to be playing an important role in encouraging men to get circumcised, so reaching out to women could be a valuable intervention strategy for increasing VMMC uptake and promoting use of other HIV protective measures after VMMC.

  8. Providers’ Perspectives on Provision of Family Planning to HIV-Positive Individuals in HIV Care in Nyanza Province, Kenya

    Sara J. Newmann


    Full Text Available Objective. To inform an intervention integrating family planning into HIV care, family planning (FP knowledge, attitudes and practices, and perspectives on integrating FP into HIV care were assessed among healthcare providers in Nyanza Province, Kenya. Methods. Thirty-one mixed-method, structured interviews were conducted among a purposive sample of healthcare workers (HCWs from 13 government HIV care facilities in Nyanza Province. Structured questions and case scenarios assessed contraceptive knowledge, training, and FP provision experience. Open-ended questions explored perspectives on integration. Data were analyzed descriptively and qualitatively. Results. Of the 31 HCWs interviewed, 45% reported previous FP training. Few providers thought long-acting methods were safe for HIV-positive women (19% viewed depot medroxyprogesterone acetate as safe and 36% viewed implants and intrauterine contraceptives as safe; fewer felt comfortable recommending them to HIV-positive women. Overall, providers supported HIV and family planning integration, yet several potential barriers were identified including misunderstandings about contraceptive safety, gendered power differentials relating to fertility decisions, staff shortages, lack of FP training, and contraceptive shortages. Conclusions. These findings suggest the importance of considering issues such as patient flow, provider burden, commodity supply, gender and cultural issues affecting FP use, and provider training in FP/HIV when designing integrated FP/HIV services in high HIV prevalence areas.

  9. Assessing the Influence of the PTTC Principal's Competency in ICT on the Teachers' Integration of ICT in Teaching Science in PTTCs in Nyanza Region, Kenya

    Omwenga, Ezekiel; Nyabero, Charles; Okioma, Lazarous


    The study was conducted to assess the influence of Primary Teacher Training College (PTTC) principal's competency in ICT on the teacher's integration of ICT in teaching science in PTTC's in Nyanza region in Kenya. The one research question and one research hypothesis guided the study. The population comprised of 21 principals and 159 tutors. Data…

  10. Jaboya vs. jakambi: Status, negotiation, and HIV risks among female migrants in the "sex for fish" economy in Nyanza Province, Kenya.

    Camlin, Carol S; Kwena, Zachary A; Dworkin, Shari L


    In Nyanza Province, Kenya, HIV incidence is highest (26.2%) in the beach communities along Lake Victoria. Prior research documented high mobility and HIV risks among fishermen; mobility patterns and HIV risks faced by women in fishing communities are less well researched. This study aimed to characterize forms of mobility among women in the fish trade in Nyanza; describe the spatial and social features of beaches; and assess characteristics of the "sex-for-fish" economy and its implications for HIV prevention. We used qualitative methods, including participant observation in 6 beach villages and other key destinations in the Kisumu area of Nyanza that attract female migrants, and we recruited individuals for in-depth semi-structured interviews at those destinations. We interviewed 40 women, of whom 18 were fish traders, and 15 men, of whom 7 were fishermen. Data were analyzed using Atlas.ti software. We found that female fish traders are often migrants to beaches; they are also highly mobile. They are at high risk of HIV acquisition and transmission via their exchange of sex for fish with jaboya fishermen.

  11. Overcoming Barriers to Family Planning through Integration: Perspectives of HIV-Positive Men in Nyanza Province, Kenya

    Rachel L. Steinfeld


    Full Text Available This study explored barriers to and facilitators of using family planning services among HIV-positive men in Nyanza Province, Kenya. From May to June 2010, in-depth interviews were conducted with 30 men receiving care at 15 HIV clinics. The key barriers to the use of family planning included concerns about side effects of contraceptives, lack of knowledge about contraceptive methods, myths and misconceptions including fear of infertility, structural barriers such as staffing shortages at HIV clinics, and a lack of male focus in family planning methods and service delivery. The integration of family planning into HIV clinics including family planning counseling and education was cited as an important strategy to improve family planning receptivity among men. Integrating family planning into HIV services is a promising strategy to facilitate male involvement in family planning. Integration needs to be rigorously evaluated in order to measure its impact on unmet need for contraception among HIV-positive women and their partners and assure that it is implemented in a manner that engages both men and women.

  12. Property rights violations as a structural driver of women's HIV risks: a qualitative study in Nyanza and Western Provinces, Kenya.

    Dworkin, Shari L; Grabe, Shelly; Lu, Tiffany; Hatcher, Abigail M; Hatcher, Abbey; Kwena, Zachary; Bukusi, Elizabeth; Mwaura-Muiru, Esther


    While access to and control over assets can minimize women's HIV risk, little is known about the processes through which property rights violations increase the sexual transmission of HIV. The current study focused on two rural areas in Nyanza and Western Province, Kenya where HIV prevalence was high (23.8-33 %) and property rights violations were common. The current work drew on in-depth interview data collected from 50 individuals involved in the development and implementation of a community-led land and property rights program. The program was designed to respond to property rights violations, prevent disinheritance and asset stripping, and reduce HIV risk among women. In our findings, we detailed the social and economic mechanisms through which a loss of property rights was perceived to influence primary and secondary prevention of HIV. These included: loss of income, loss of livelihood and shelter, and migration to slums, markets, or beaches where the exchange of sex for food, money, shelter, clothing, or other goods was common. We also examined the perceived influence of cultural practices, such as wife inheritance, on HIV risk. In the conclusions, we made recommendations for future research in the science-base focused on the development of property ownership as a structural HIV prevention and treatment intervention.

  13. Identifying and addressing barriers to uptake of voluntary medical male circumcision in Nyanza, Kenya among men 18-35: a qualitative study.

    Emily Evens

    Full Text Available BACKGROUND: Uptake of VMMC among adult men has been lower than desired in Nyanza, Kenya. Previous research has identified several barriers to uptake but qualitative exploration of barriers is limited and evidence-informed interventions have not been fully developed. This study was conducted in 2012 to 1 increase understanding of barriers to VMMC and 2 to inform VMMC rollout through the identification of evidence-informed interventions among adult men at high risk of HIV in Nyanza Province, Kenya. METHODS: Focus groups (n = 8 and interviews were conducted with circumcised (n = 8 and uncircumcised men (n = 14 from the two districts in Nyanza, Kenya. Additional interviews were conducted with female partners (n = 20, health providers (n = 12, community leaders (n = 12 and employers (n = 12. Interview and focus group guides included questions about individual, interpersonal and societal barriers to VMMC uptake and ways to overcome them. Inductive thematic coding and analysis were conducted through a standard iterative process. RESULTS: Two primary concerns with VMMC emerged 1 financial issues including missing work, losing income during the procedure and healing and family survival during the recovery period and 2 fear of pain during and after the procedure. Key interventions to address financial concerns included: a food or cash transfer, education on saving and employer-based benefits. Interventions to address concerns about pain included refining the content of demand creation and counseling messages about pain and improving the ways these messages are delivered. CONCLUSIONS: Men need accurate and detailed information on what to expect during and after VMMC regarding both pain and time away from work. This information should be incorporated into demand creation activities for men considering circumcision. Media content should frankly and correctly address these concerns. Study findings support scale up and/or further improvement of these ongoing

  14. The Relationship Between Distance and Post-operative Visit Attendance Following Medical Male Circumcision in Nyanza Province, Kenya.

    Golub, Ginger; Herman-Roloff, Amy; Hoffman, Susie; Jaoko, Walter; Bailey, Robert C


    To date, there is no research on voluntary medical male circumcision (VMMC) catchment areas or the relationship between distance to a VMMC facility and attendance at a post-operative follow-up visit. We analyzed data from a randomly selected subset of males self-seeking circumcision at one of 16 participating facilities in Nyanza Province, Kenya between 2008 and 2010. Among 1437 participants, 46.7 % attended follow-up. The median distance from residence to utilized facility was 2.98 km (IQR 1.31-5.38). Nearly all participants (98.8 %) lived within 5 km from a facility, however, 26.3 % visited a facility more than 5 km away. Stratified results demonstrated that among those utilizing fixed facilities, greater distance was associated with higher odds of follow-up non-attendance (OR5.01-10km vs. 0-1km = 1.71, 95 % CI 1.08, 2.70, p = 0.02; OR>10km vs. 0-1 km = 2.80, 95 % CI 1.26, 6.21, p = 0.01), adjusting for age and district of residence. We found 5 km marked the threshold distance beyond which follow-up attendance significantly dropped. These results demonstrate distance is an important predictor of attending follow-up, and this relationship appears to be modified by facility type.

  15. Water Hyacinth Eichhornia crassipes (Mart. Solms-Laubach Dynamics and Succession in the Nyanza Gulf of Lake Victoria (East Africa: Implications for Water Quality and Biodiversity Conservation

    John Gichuki


    Full Text Available This study, conducted in Nyanza Gulf of Lake Victoria, assessed ecological succession and dynamic status of water hyacinth. Results show that water hyacinth is the genesis of macrophyte succession. On establishment, water hyacinth mats are first invaded by native emergent macrophytes, Ipomoea aquatica Forsk., and Enydra fluctuans Lour., during early stages of succession. This is followed by hippo grass Vossia cuspidata (Roxb. Griff. in mid- and late stages whose population peaks during climax stages of succession with concomitant decrease in water hyacinth biomass. Hippo grass depends on water hyacinth for buoyancy, anchorage, and nutrients. The study concludes that macrophyte succession alters aquatic biodiversity and that, since water hyacinth infestation and attendant succession are a symptom of broader watershed management and pollution problems, aquatic macrophyte control should include reduction of nutrient loads and implementing multifaceted approach that incorporates biological agents, mechanical/manual control with utilization of harvested weed for cottage industry by local communities.

  16. Descriptive characteristics and health outcomes of the food by prescription nutrition supplementation program for adults living with HIV in Nyanza Province, Kenya.

    Jason M Nagata

    Full Text Available The clinical effects and potential benefits of nutrition supplementation interventions for persons living with HIV remain largely unreported, despite awareness of the multifaceted relationship between HIV infection and nutrition. We therefore examined descriptive characteristics and nutritional outcomes of the Food by Prescription (FBP nutrition supplementation program in Nyanza Province, Kenya.Demographic, health, and anthropometric data were gathered from a retrospective cohort of 1,017 non-pregnant adult patients who enrolled into the FBP program at a Family AIDS Care and Education Services (FACES site in Nyanza Province between July 2009 and July 2011. Our primary outcome was FBP treatment success defined as attainment of BMI>20, and we used Cox proportional hazards to assess socio-demographic and clinical correlates of FBP treatment success.Mean body mass index was 16.4 upon enrollment into the FBP program. On average, FBP clients gained 2.01 kg in weight and 0.73 kg/m2 in BMI over follow-up (mean 100 days, with the greatest gains among the most severely undernourished (BMI 20, though 44.5% achieved a BMI increase ≥0.5. Greater BMI at baseline, younger age, male gender, and not requiring highly active antiretroviral therapy (HAART were associated with a higher rate of attainment of BMI>20.This study reports significant gains in weight and BMI among patients enrolled in the FBP program, though only a minority of patients achieved stated programmatic goals of BMI>20. Future research should include well-designed prospective studies that examine retention, exit reasons, mortality outcomes, and long-term sustainability of nutrition supplementation programs for persons living with HIV.

  17. Property Rights Violations as a Structural Driver of Women’s HIV Risks: A Qualitative Study in Nyanza and Western Provinces, Kenya

    Grabe, Shelly; Lu, Tiffany; Hatcher, Abbey; Kwena, Zachary; Bukusi, Elizabeth; Mwaura-Muiru, Esther


    While access to and control over assets can minimize women’s HIV risk, little is known about the processes through which property rights violations increase the sexual transmission of HIV. The current study focused on two rural areas in Nyanza and Western Province, Kenya where HIV prevalence was high (23.8–33 %) and property rights violations were common. The current work drew on in-depth interview data collected from 50 individuals involved in the development and implementation of a community-led land and property rights program. The program was designed to respond to property rights violations, prevent disinheritance and asset stripping, and reduce HIV risk among women. In our findings, we detailed the social and economic mechanisms through which a loss of property rights was perceived to influence primary and secondary prevention of HIV. These included: loss of income, loss of livelihood and shelter, and migration to slums, markets, or beaches where the exchange of sex for food, money, shelter, clothing, or other goods was common. We also examined the perceived influence of cultural practices, such as wife inheritance, on HIV risk. In the conclusions, we made recommendations for future research in the science-base focused on the development of property ownership as a structural HIV prevention and treatment intervention. PMID:23179234

  18. Providers' perspectives on male involvement in family planning in the context of a cluster-randomized controlled trial evaluating integrating family planning into HIV care in Nyanza Province, Kenya.

    Tao, Amy R; Onono, Maricianah; Baum, Sarah; Grossman, Daniel; Steinfeld, Rachel; Cohen, Craig R; Bukusi, Elizabeth A; Newmann, Sara J


    Integration of family planning (FP) services into HIV care and increasing male partner involvement in FP are being explored as strategies to reduce unmet need for contraception. Providers' views can give valuable insight into current FP care. We evaluated the perspectives of HIV care providers working at HIV clinics in Nyanza Province, Kenya, on male partner involvement in FP. This qualitative study was part of a cluster-randomized controlled trial evaluating the impact of integrating FP into HIV services on contraceptive prevalence among HIV-positive patients in Nyanza Province, Kenya. Thirty individual interviews were conducted among health-care workers at 11 HIV care facilities in Nyanza Province, Kenya. Interviews were conducted from integrated and control sites one year after implementation of FP/HIV integration. Data were transcribed and analyzed using grounded theory methods and ATLAS-ti. Providers supported male partner inclusion when choosing FP and emphasized that decisions should be made collaboratively. Providers believed that men have traditionally played a prohibitive role in FP but identified several benefits to partner involvement in FP decision-making including: reducing relationship conflicts, improving FP knowledge and contraceptive continuation, and increasing partner cohesion. Providers suggested that integrated FP/HIV services facilitate male partner involvement in FP decision-making since HIV-positive men are already established patients in HIV clinics. Some providers stated that women had a right to choose and start FP alone if their partners did not agree with using FP. Integrated FP services may be a useful strategy to help increase male participation to reduce the unmet FP need in sub-Saharan Africa. It is important to determine effective ways to engage male partners in FP, without impinging upon women's autonomy and reproductive rights.

  19. Sediment Transport

    Liu, Zhou

    Flow and sediment transport are important in relation to several engineering topics, e.g. erosion around structures, backfilling of dredged channels and nearshore morphological change. The purpose of the present book is to describe both the basic hydrodynamics and the basic sediment transport...... mechanics. Chapter 1 deals with fundamentals in fluid mechanics with emphasis on bed shear stress by currents, while chapter 3 discusses wave boundary layer theory. They are both written with a view to sediment transport. Sediment transport in rivers, cross-shore and longshore are dealt with in chapters 2......, 4 and 5, respectively. It is not the intention of the book to give a broad review of the literature on this very wide topic. The book tries to pick up information which is of engineering importance. An obstacle to the study of sedimentation is the scale effect in model tests. Whenever small...

  20. E. coli Surface Properties Differ between Stream Water and Sediment Environments

    Xiao Liang


    Full Text Available The importance of E. coli as an indicator organism in fresh water has led to numerous studies focusing on cell properties and transport behavior. However, previous studies have been unable to assess if differences in E. coli cell surface properties and genomic variation are associated with different environmental habitats. In this study, we investigated the variation in characteristics of E. coli obtained from stream water and stream bottom sediments. Cell properties were measured for 77 genomically different E. coli strains (44 strains isolated from sediments and 33 strains isolated from water under common stream conditions in the Upper Midwestern United States: pH 8.0, ionic strength 10mM and 22˚C. Measured cell properties include hydrophobicity, zeta potential, net charge, total acidity and extracellular polymeric substance (EPS composition. Our results indicate that stream sediment E. coli had significantly greater hydrophobicity, greater EPS protein content and EPS sugar content, less negative net charge, and higher point of zero charge than stream water E. coli. A significant positive correlation was observed between hydrophobicity and EPS protein for stream sediment E. coli but not for stream water E. coli. Additionally, E. coli surviving in the same habitat tended to have significantly larger (GTG5 genome similarity. After accounting for the intrinsic impact from the genome, environmental habitat was determined to be a factor influencing some cell surface properties, such as hydrophobicity. The diversity of cell properties and its resulting impact on particle interactions should be considered for environmental fate and transport modeling of aquatic indicator organisms such as E. coli.

  1. E. coli Surface Properties Differ between Stream Water and Sediment Environments.

    Liang, Xiao; Liao, Chunyu; Thompson, Michael L; Soupir, Michelle L; Jarboe, Laura R; Dixon, Philip M


    The importance of E. coli as an indicator organism in fresh water has led to numerous studies focusing on cell properties and transport behavior. However, previous studies have been unable to assess if differences in E. coli cell surface properties and genomic variation are associated with different environmental habitats. In this study, we investigated the variation in characteristics of E. coli obtained from stream water and stream bottom sediments. Cell properties were measured for 77 genomically different E. coli strains (44 strains isolated from sediments and 33 strains isolated from water) under common stream conditions in the Upper Midwestern United States: pH 8.0, ionic strength 10 mM and 22°C. Measured cell properties include hydrophobicity, zeta potential, net charge, total acidity, and extracellular polymeric substance (EPS) composition. Our results indicate that stream sediment E. coli had significantly greater hydrophobicity, greater EPS protein content and EPS sugar content, less negative net charge, and higher point of zero charge than stream water E. coli. A significant positive correlation was observed between hydrophobicity and EPS protein for stream sediment E. coli but not for stream water E. coli. Additionally, E. coli surviving in the same habitat tended to have significantly larger (GTG)5 genome similarity. After accounting for the intrinsic impact from the genome, environmental habitat was determined to be a factor influencing some cell surface properties, such as hydrophobicity. The diversity of cell properties and its resulting impact on particle interactions should be considered for environmental fate and transport modeling of aquatic indicator organisms such as E. coli.

  2. Analysis of the gamma spectrometry {sup 210}Pb radioisotope in river bottom sediments of the hydrographic sub-basins around the UTM-Caldas

    Dutra, Pedro H.; Carvalho Filho, Carlos A.; Moreira, Rubens M.; Menezes, Maria Angela B.C.; Oliveira, Aline F.G. de, E-mail: [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Silva, Nivaldo C., E-mail: [Comissao Nacional de Energia Nuclear (LAPOC/CNEN-MG), Pocos de Caldas, MG (Brazil). Laboratorio de Pocos de Caldas; Viana, Valquiria F.L., E-mail: [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Instituto de Ciencias Biologicas


    The uranium mine of Caldas, currently named Ore Treatment Unit (UTM-Caldas), is sited at the Pocos de Caldas Plateau (Minas Gerais State) and was the first uranium mineral-industrial complex in Brazil. It has been installed since 1982 and now it is under decommissioning process. Taking into account the potential sources of contamination and the assessment of the impact of the mine, based on the presence of radionuclides from the radioactive decay series of natural {sup 238}U, the aim of the article is to present the distribution of {sup 210}Pb in the stream bottom sediments of the study area that consists of the Taquari watershed, sub-divided by its three major sub-basins: Consulta stream, Soberbo stream and Taquari river. The radionuclide activity concentrations were measured in sediment samples that were collected in twelve collecting points, during four sampling campaigns, carried out in the dry and rainy seasons of 2010 and 2011. The results of the {sup 210}Pb concentration activity were obtained by gamma spectrometry performed in both high and low energy CANBERRA detectors. The results point out that the UTM-Caldas is influencing on the bottom sediment distribution of {sup 210}Pb activity in its neighborhood. However, a more detailed study should be done in order to identify if there is another source of {sup 210}Pb in the study area, such as a geogenic anomaly, that may contributing to the local increment of {sup 210}Pb activity. (author)

  3. Multielemental analysis of Migori (Southwest, Kenya) artisanal gold mine ores and sediments by EDX-ray fluorescence technique: implications of occupational exposure and environmental impact.

    Odumo, O B; Mustapha, A O; Patel, J P; Angeyo, H K


    The results of heavy element profiling of the gold ores and sediments associated with the artisanal gold mining activities of the Migori gold belt of Southwestern Nyanza, Kenya, were reported in this paper. The analysis was made to assess the occupational exposure of the miners as well as to investigate the environmental impact of toxic heavy metals. Gold ores and sediments from the artisanal gold processing were sampled in four artisanal gold mining areas: Osiri A, Osiri B, Mikei and Macalder (Makalda) and analyzed for heavy elemental content using (109)Cd radioisotope excited EDXRF spectrometry technique. Analysis consisted of direct irradiating of sample pellets. The concentrations of major elements detected were: titanium (711.41-10,766.67 mg/kg); cobalt (82.65-1,010.00 mg/kg); zinc (29.90-63,210 mg/kg); arsenic (29.30-8,246.59 mg/kg); gold (14.07-73.48 mg/kg); lead (16.31-14,999.40 mg/kg) and mercury (16.10-149.93 mg/kg). The average concentration of the heavy toxic metals i.e. arsenic, lead, titanium and zinc were found to be above 50 mg/Kg as recommended by World Health Organization.

  4. Acid mine pollution: effects on survival, reproduction and aging of stream bottom microinvertebrates. Completion report

    Hummon, W.D.


    Warbug manometry was used to assess the effect of acid mine water on respiratory processes in three species of aquatic insect larvae. Field collections and laboratory toxicity tests indicated short longevity under strong acid mine conditions. Mixed results were found with respect to weight-dependent respiratory rates. Sequential respiration determinations, under control-control or control-treatment fluids, indicated that acid mine water did not consistently alter rates. Animals maintained in mine water until death showed gradual decreases in respiratory rates over time, rather than stepwise drops that would accompany ionic interference. For these species the toxic mode of action of acid mine water does not appear to operate through mechanisms that are detectable by respirometry.




    May 5, 2004 ... necessary resources and training to perform the procedure safely. ... of the district health management team. ..... and human immunodeficiency virus transmission in Kenya ... Weiss, H.A., Quigley, M.A., and Hayes, R. J., Male.

  6. Occurrence and partitioning of antibiotic compounds found in the water column and bottom sediments from a stream receiving two wastewater treatment plant effluents in Northern New Jersey, 2008

    Gibs, Jacob, E-mail: [U.S. Geological Survey, 810 Bear Tavern Road, West Trenton, NJ 08628 (United States); Heckathorn, Heather A. [U.S. Geological Survey, 810 Bear Tavern Road, West Trenton, NJ 08628 (United States); Meyer, Michael T. [U.S. Geological Survey, 4821 Quail Crest Place, Lawrence, KS 66049 (United States); Klapinski, Frank R.; Alebus, Marzooq; Lippincott, Robert L. [New Jersey Department of Environmental Protection, PO Box 413, Trenton, NJ 08625 (United States)


    An urban watershed in northern New Jersey was studied to determine the presence of four classes of antibiotic compounds (macrolides, fluoroquinolones, sulfonamides, and tetracyclines) and six degradates in the water column and bottom sediments upstream and downstream from the discharges of two wastewater treatment plants (WWTPs) and a drinking-water intake (DWI). Many antibiotic compounds in the four classes not removed by conventional WWTPs enter receiving waters and partition to stream sediments. Samples were collected at nine sampling locations on 2 days in September 2008. Two of the nine sampling locations were background sites upstream from two WWTP discharges on Hohokus Brook. Another background site was located upstream from a DWI on the Saddle River above the confluence with Hohokus Brook. Because there is a weir downstream of the confluence of Hohokus Brook and Saddle River, the DWI receives water from Hohokus Brook at low stream flows. Eight antibiotic compounds (azithromycin (maximum concentration 0.24 μg/L), ciprofloxacin (0.08 μg/L), enrofloxacin (0.015 μg/L), erythromycin (0.024 μg/L), ofloxacin (0.92 μg/L), sulfamethazine (0.018 μg/L), sulfamethoxazole (0.25 μg/L), and trimethoprim (0.14 μg/L)) and a degradate (erythromycin–H{sub 2}O (0.84 μg/L)) were detected in the water samples from the sites downstream from the WWTP discharges. The concentrations of six of the eight detected compounds and the detected degradate compound decreased with increasing distance downstream from the WWTP discharges. Azithromycin, ciprofloxacin, ofloxacin, and trimethoprim were detected in stream-bottom sediments. The concentrations of three of the four compounds detected in sediments were highest at a sampling site located downstream from the WWTP discharges. Trimethoprim was detected in the sediments from a background site. Pseudo-partition coefficients normalized for streambed sediment organic carbon concentration were calculated for azithromycin

  7. Ocean Sediment Thickness Contours

    National Oceanic and Atmospheric Administration, Department of Commerce — Ocean sediment thickness contours in 200 meter intervals for water depths ranging from 0 - 18,000 meters. These contours were derived from a global sediment...

  8. National Geochemical Database: Sediment

    U.S. Geological Survey, Department of the Interior — Geochemical analysis of sediment samples from the National Geochemical Database. Primarily inorganic elemental concentrations, most samples are of stream sediment in...

  9. Indicators: Sediment Enzymes

    Sediment enzymes are proteins that are produced by microorganisms living in the sediment or soil. They are indicators of key ecosystem processes and can help determine which nutrients are affecting the biological community of a waterbody.

  10. National Geochemical Database: Sediment

    U.S. Geological Survey, Department of the Interior — Geochemical analysis of sediment samples from the National Geochemical Database. Primarily inorganic elemental concentrations, most samples are of stream sediment...

  11. Center for Contaminated Sediments

    Federal Laboratory Consortium — The U.S. Army Corps of Engineers Center for Contaminated Sediments serves as a clearinghouse for technology and expertise concerned with contaminated sediments. The...

  12. Electrodialytic remediation of sediments

    Jensen, Pernille Erland

    often hinders this usage. Hence, for both types of sediments, expensive deposition at hazardous waste landfills is required. Electrodialysis is presently being developed as an alternative method for treatment of such contaminated sediments. Heavy metals are removed by treating the sediments...

  13. Occurence of antibiotic compounds found in the water column and bottom sediments from a stream receiving two waste water treatment plant effluents in northern New Jersey, 2008

    Gibs, Jacob; Heckathorn, Heather A.; Meyer, Michael T.; Klapinski, Frank R.; Alebus, Marzooq; Lippincott, Robert


    An urban watershed in northern New Jersey was studied to determine the presence of four classes of antibiotic compounds (macrolides, fluoroquinolones, sulfonamides, and tetracyclines) and six degradates in the water column and bottom sediments upstream and downstream from the discharges of two wastewater treatment plants (WWTPs) and a drinking-water intake (DWI). Many antibiotic compounds in the four classes not removed by conventional WWTPs enter receiving waters and partition to stream sediments. Samples were collected at nine sampling locations on 2 days in September 2008. Two of the nine sampling locations were background sites upstream from two WWTP discharges on Hohokus Brook. Another background site was located upstream from a DWI on the Saddle River above the confluence with Hohokus Brook. Because there is a weir downstream of the confluence of Hohokus Brook and Saddle River, the DWI receives water from Hohokus Brook at low stream flows. Eight antibiotic compounds (azithromycin (maximum concentration 0.24 μg/L), ciprofloxacin (0.08 μg/L), enrofloxacin (0.015 μg/L), erythromycin (0.024 μg/L), ofloxacin (0.92 μg/L), sulfamethazine (0.018 μg/L), sulfamethoxazole (0.25 μg/L), and trimethoprim (0.14 μg/L)) and a degradate (erythromycin-H2O (0.84 μg/L)) were detected in the water samples from the sites downstream from the WWTP discharges. The concentrations of six of the eight detected compounds and the detected degradate compound decreased with increasing distance downstream from the WWTP discharges. Azithromycin, ciprofloxacin, ofloxacin, and trimethoprim were detected in stream-bottom sediments. The concentrations of three of the four compounds detected in sediments were highest at a sampling site located downstream from the WWTP discharges. Trimethoprim was detected in the sediments from a background site. Pseudo-partition coefficients normalized for streambed sediment organic carbon concentration were calculated for azithromycin, ciprofloxacin, and

  14. Sediment Core Laboratory

    Federal Laboratory Consortium — FUNCTION: Provides instrumentation and expertise for physical and geoacoustic characterization of marine sediments. DESCRIPTION: The multisensor core logger measures...

  15. Sediment Core Laboratory

    Federal Laboratory Consortium — FUNCTION: Provides instrumentation and expertise for physical and geoacoustic characterization of marine sediments.DESCRIPTION: The multisensor core logger measures...

  16. Dynamics of Cohesive Sediments

    Johansen, Claus

    the nature of the cohesive sediment with respect to the transport processes is presented. In addition, the flocculation process and the rheological behaviour of cohesive sediments is outlined. The second part contains the laboratory experiments. The laboratory experiments were conducted with respect......The present thesis considers the transport processes of cohesive sediments. The cohesive sediment used in the laboratory experiments was kaolinite, a clay mineral, in order to be able to reproduce the individual experiments. In the first part of the thesis, the theoretical considerations regarding...

  17. The contribution of bank and surface sediments to fluvial sediment ...

    The contribution of bank and surface sediments to fluvial sediment transport of the Pra River. ... Sediment source studies involving a simple mixing model was undertaken in the ... For bank erosion, river channel bank materials were sampled.

  18. Sediment supply to beaches

    Aagaard, Troels


    and this reduces confidence in predictions of long-term shoreline change. In this paper, field measurements of suspended sediment load and cross-shore transport on the lower shoreface are used to derive a model for sediment supply from the lower to the upper shoreface at large spatial and temporal scales. Data...

  19. Radiochronology of lake sediments

    Erten, H.N. [Bilkent Univ., Ankara (Turkey). Dept. of Chemistry


    Sediment cores from Lakes Zurich, Constance, from the Sea of Marmara and from southern Turkey, northern Cyprus and eastern Spain were dated using natural {sup 210}Pb, fallout {sup 137}Cs and cosmic-ray produced {sup 7}Be radionuclides. Constant activity regions in the uppermost sections of sediments from Lake Zurich and the Sea of Marmara were attributed to post-depositional mobility of {sup 210}Pb in the former case and to bioturbation in the latter. A serious discrepancy exists between the {sup 210}Pb dating of Sea of Marmara sediments and those obtained by organic carbon based methods. The elements Zn, Cu, P and Pb were enriched in the upper sections of the sediment cores corresponding to the last 200 years. The increased metallurgical activities as a result of reforms in the Ottoman Army during the 18th century could be the most likely cause. (Author).

  20. Sediment Resuspension Data

    U.S. Environmental Protection Agency — The full report on sediment resuspension in drinking water storage tanks and a link to an animation of results. This dataset is associated with the following...

  1. Rapid Sediment Characterization Tools


    Organic (PAHs), inorganic (metals) Mobile field Lab or lab * Biomarkers (P450RGS dioxin screening assay) Dioxins , PAHs Lab Biological *cDNA...7 Immunoassays for PCBs, PAHs, Pesticides, and Dioxins ...9 P450RGS Dioxin Screening Assay for Sediment

  2. Offshore Surficial Sediment

    California Department of Resources — This data layer (PAC_EXT.txt and PAC_PRS.txt) represents two of five point coverages of known sediment samples, inspections, and probes from the usSEABED data...

  3. Cell aggregation and sedimentation.

    Davis, R H


    The aggregation of cells into clumps or flocs has been exploited for decades in such applications as biological wastewater treatment, beer brewing, antibiotic fermentation, and enhanced sedimentation to aid in cell recovery or retention. More recent research has included the use of cell aggregation and sedimentation to selectively separate subpopulations of cells. Potential biotechnological applications include overcoming contamination, maintaining plasmid-bearing cells in continuous fermentors, and selectively removing nonviable hybridoma cells from perfusion cultures.

  4. Hydrodynamics of sediment threshold

    Ali, Sk Zeeshan; Dey, Subhasish


    A novel hydrodynamic model for the threshold of cohesionless sediment particle motion under a steady unidirectional streamflow is presented. The hydrodynamic forces (drag and lift) acting on a solitary sediment particle resting over a closely packed bed formed by the identical sediment particles are the primary motivating forces. The drag force comprises of the form drag and form induced drag. The lift force includes the Saffman lift, Magnus lift, centrifugal lift, and turbulent lift. The points of action of the force system are appropriately obtained, for the first time, from the basics of micro-mechanics. The sediment threshold is envisioned as the rolling mode, which is the plausible mode to initiate a particle motion on the bed. The moment balance of the force system on the solitary particle about the pivoting point of rolling yields the governing equation. The conditions of sediment threshold under the hydraulically smooth, transitional, and rough flow regimes are examined. The effects of velocity fluctuations are addressed by applying the statistical theory of turbulence. This study shows that for a hindrance coefficient of 0.3, the threshold curve (threshold Shields parameter versus shear Reynolds number) has an excellent agreement with the experimental data of uniform sediments. However, most of the experimental data are bounded by the upper and lower limiting threshold curves, corresponding to the hindrance coefficients of 0.2 and 0.4, respectively. The threshold curve of this study is compared with those of previous researchers. The present model also agrees satisfactorily with the experimental data of nonuniform sediments.

  5. Quantifying the in-channel retention of cohesive sediments during artificial flood events using FTIR-DRIFT spectrometry

    Kurtenbach, A.; Gallé, T.; Buis, K.; de Sutter, R.; Troch, P.; Eisold, B.; Bierl, R.; Symader, W.


    Cohesive sediments control river ecosystem quality both as a transport medium for contaminants and as clogging material of stream bottom habitats. However, experimental field studies with fine-grained sediments in fluvial systems are rather scarce owing to the lack of adequate tracers and detection methods. As a result, current modelling approaches only insufficiently describe hydrodynamic transport and depositional behaviour of fine-grained sediments in rivers. We adopted two strategies to specifically study cohesive sediment dynamics in natural systems under defined boundary conditions. First, artificial floods were generated in the Olewiger Bach basin (24 km²), a mid-mountain gravel bed river, in order to characterise the in-channel fine sediment dynamics on their own. The advantage of these artificial flood waves lies in the selective control on some governing processes by experimental design. Second, fine sediment transport and deposition during these controlled reservoir releases were analysed by introducing the clay mineral kaolinite as a fine particle tracer, whose concentration was measured by Fourier transform infrared spectroscopy (FTIR) in diffuse reflectance mode (DRIFT). The DRIFT technique offers some important advantages such as the ability to assess both mineral and organic structures in aquatic particles, good sensitivity and high throughput (Gallé et al. 2004). Our laboratory tests confirm that FTIR-DRIFT spectrometry is capable of detecting the kaolinite tracer even in low percentage solid concentrations. The mass balance of the injected kaolinite for near bank-full artificial floods showed that, in spite of the very fine material and the non-stationary boundary conditions, over 50 percent of the tracer could be retained over a flow length of only 500 m. By combining fine particulate and natural dissolved tracers (e.g. dissolved organic carbon, DOC) we were able to identify the hyporheic zone as a potential short-term retention and storage

  6. Sedimentation of Knotted Polymers

    Piili, Joonas; Kaski, Kimmo; Linna, Riku


    We investigate the sedimentation of knotted polymers by means of the stochastic rotation dynamics, a molecular dynamics algorithm which takes hydrodynamics fully into account. We show that the sedimentation coefficient s, related to the terminal velocity of the knotted polymers, increases linearly with the average crossing number n_c of the corresponding ideal knot. To the best of our knowledge, this provides the first direct computational confirmation of this relation, postulated on the basis of experiments in "The effect of ionic conditions on the conformations of supercoiled DNA. I. sedimentation analysis" by Rybenkov et al., for the case of sedimentation. Such a relation was previously shown to hold with simulations for knot electrophoresis. We also show that there is an accurate linear dependence of s on the inverse of the radius of gyration R_g^-1, more specifically with the inverse of the R_g component that is perpendicular to the direction along which the polymer sediments. Intriguingly, the linear de...

  7. Petrophysics of Palaeogene sediments

    Awadalkarim, Ahmed

    the geomechanical behaviour of shale. Biot’s coefficient (β) for elastic deformation is an important parameter involves in the estimation of effective stress. However, engineers usually assume β equal to one when estimating in-situ vertical effective stress on buried sediments, but, this assumption is not always...... related to borehole stability. This Ph.D. study stressed on the importance of using correct β value in estimation of vertical effective stress especially on deep-sea sediments. To assess the geomechanical stability and the stiffness of the three studied lithologies, their β was found and used to calculate...

  8. Toxicity of contaminated sediments in dilution series with control sediments

    Nelson, M.K.; Landrum, P.F.; Burton, G.A.; Klaine, S.J.; Crecelius, E.A.; Byl, T.D.; Gossiaux, Duane C.; Tsymbal, V.N.; Cleveland, L.; Ingersoll, Christopher G.; Sasson-Brickson, G.


    The use of dilutions has been the foundation of our approach for assessing contaminated water, and accordingly, it may be important to establish similar or parallel approaches for sediment dilutions. Test organism responses to dilution gradients can identify the degree of necessary sediment alteration to reduce the toxicity. Using whole sediment dilutions to represent the complex interactions of in situ sediments can identify the toxicity, but the selection of the appropriate diluent for the contaminated sediment may affect the results and conclusions drawn. Contaminated whole sediments were examined to evaluate the toxicity of dilutions of sediments with a diversity of test organisms. Dilutions of the contaminated sediments were prepared with differing diluents that varied in organic carbon content, particle size distribution, and volatile solids. Studies were conducted using four macroinvertebrates and a vascular, rooted plant. Responses by some test organisms followed a sigmoidal dose-response curve, but others followed a U-shaped curve. Initial dilutions reduced toxicity as expected, but further dilution resulted in an increase in toxicity. The type of diluent used was an important factor in assessing the sediment toxicity, because the control soil reduced toxicity more effectively than sand as a diluent of the same sediment. Using sediment chemical and physical characteristics as an indicator of sediment dilution may not be as useful as chemical analysis of contaminants, but warrants further investigation.

  9. Sediments of a retting yard

    Remani, K.N.; Venugopal, P.; Devi, K.S.; Unnithan, R.V.

    Sediments of a coconut husk retting yard and a reference station in Cochin backwaters, Kerala, India were studied for 1 yr. Effects of monsoon were found significant Organic carbon and organic matter showed enrichment in the retting ground sediments...



    The analysis of the sediment problems in irrigation engineeringwas carried out, and the layout, the method as well as the effect of sediment control for irrigation intake structures in China were briefly introduced.

  11. Cable Bacteria in Freshwater Sediments

    Risgaard-Petersen, Nils; Kristiansen, Michael; Frederiksen, Rasmus B.; Dittmer, Anders Lindequist; Bjerg, Jesper Tataru; Trojan, Daniela; Schreiber, Lars; Damgaard, Lars Riis; Schramm, Andreas; Nielsen, Lars Peter


    In marine sediments cathodic oxygen reduction at the sediment surface can be coupled to anodic sulfide oxidation in deeper anoxic layers through electrical currents mediated by filamentous, multicellular bacteria of the Desulfobulbaceae family, the so-called cable bacteria. Until now, cable bacteria have only been reported from marine environments. In this study, we demonstrate that cable bacteria also occur in freshwater sediments. In a first step, homogenized sediment collected from the fre...

  12. Deep-water sediment bypass

    Stevenson, Christopher J.; Jackson, Christopher A L; Hodgson, David M.; Hubbard, Stephen M.; Eggenhuisen, Joris T.


    Submarine gravity flows are a key process for transporting large volumes of sediment from the continents to the deep sea. The location, volume, and character of the sediment bypassed by these flows dictates the areal extent and thickness of the associated deposits. Despite its importance, sediment b

  13. Sediment problems in reservoirs. Control of sediment deposits

    Jacobsen, Tom


    When a reservoir is formed on a river, sediment will deposit in the reservoir. Such processes are unfortunate, for instance, for the implementation of hydroelectric energy. This thesis studies the problem of reservoir sedimentation and discusses methods of removing the sediments. Various aspects of reservoir sedimentation are discussed. Anthropogenic impacts seem to greatly affect the erosion processes. Temporal distribution is uneven, mainly because of the very large flood events. A world map showing the Reservoir Capacity: Annual Sediment Inflow ratio for reservoirs with volume equal to 10% of annual inflow has been prepared. The map shows that sedimentation is severe in the western parts of North and South America, eastern, southern and northern Africa, parts of Australia and most of Asia. The development of medium-sized reservoirs is difficult, as they are too large for conventional flushing technique and too small to store the sediment that accumulates during their economic lifetime. A computer model, SSIIM, was used with good results in a case study of two flood drawdown trials in Lake Roxburg, New Zealand. Two techniques have been developed that permits controlled suction of sediment and water into a pipe: the Slotted Pipe Sediment Sluicer (SPSS) and the Saxophone Sediment Sluicer (SSS). The techniques exploit the inflow pattern in through a slot in a pipe. An equation describing this inflow pattern was derived and verified experimentally. The SPSS is fixed near the reservoir bed, and sediment that deposits on top of it is removed in the sluicing process. The SSS sluices sediment from the surface of the sediment deposits. Some technical and economic conditions affecting the economics of sediment removal from reservoirs have been identified and studied. 79 refs., 112 figs., 14 tabs.

  14. Community Sediment Transport Model


    are used to determine that model results are consistent across compilers, platforms, and computer architectures , and to ensure that changes in code do...Mississippi State University: Bhate During the early months of this project, the focus was on understanding ROMS-CSTM model, architecture , and...Marchesiello, J.C. McWilliams, & K.D. Stolzenbach, 2007: Sediment transport modeling on Southern Californian shelves: A ROMS case study. Continental

  15. Pushpoint sampling for defining spatial and temporal variations in contaminant concentrations in sediment pore water near the ground-water / surface-water interface

    Zimmerman, Marc J.; Massey, Andrew J.; Campo, Kimberly W.


    During four periods from April 2002 to June 2003, pore-water samples were taken from river sediment within a gaining reach (Mill Pond) of the Sudbury River in Ashland, Massachusetts, with a temporary pushpoint sampler to determine whether this device is an effective tool for measuring small-scale spatial variations in concentrations of volatile organic compounds and selected field parameters (specific conductance and dissolved oxygen concentration). The pore waters sampled were within a subsurface plume of volatile organic compounds extending from the nearby Nyanza Chemical Waste Dump Superfund site to the river. Samples were collected from depths of 10, 30, and 60 centimeters below the sediment surface along two 10-meter-long, parallel transects extending into the river. Twenty-five volatile organic compounds were detected at concentrations ranging from less than 1 microgram per liter to hundreds of micrograms per liter (for example, 1,2-dichlorobenzene, 490 micrograms per liter; cis-1,2-dichloroethene, 290 micrograms per liter). The most frequently detected compounds were either chlorobenzenes or chlorinated ethenes. Many of the compounds were detected only infrequently. Quality-control sampling indicated a low incidence of trace concentrations of contaminants. Additional samples collected with passive-water-diffusion-bag samplers yielded results comparable to those collected with the pushpoint sampler and to samples collected in previous studies at the site. The results demonstrate that the pushpoint sampler can yield distinct samples from sites in close proximity; in this case, sampling sites were 1 meter apart horizontally and 20 or 30 centimeters apart vertically. Moreover, the pushpoint sampler was able to draw pore water when inserted to depths as shallow as 10 centimeters below the sediment surface without entraining surface water. The simplicity of collecting numerous samples in a short time period (routinely, 20 to 30 per day) validates the use of a

  16. Magnetism of quaternary sediments

    Heller, Friedrich

    Magnetism of Quaternary sediments was the topic of a well-attended symposium held during the 13th INQUA (International Union of Quaternary Research) congress in Beijing, China, August 2-9. More than 40 papers were delivered by scientists from Belgium, England, France, Germany, Japan, New Zealand, Sweden, Switzerland, Taiwan, the United States, the Soviet Union, Yugoslavia, and other countries. The host country contributed to a productive session that was part of the first large scientific meeting to take place in Beijing after the June 4, 1989, upheaval.Nearly half of the studies focused on paleomagnetic and rock magnetic properties of loess in Alaska, Central Asia, China, and New Zealand. Magnetostratigraphic polarity dating was done at some sections in the western (Shaw et al.) and central Chinese loess plateau (Bai and Hus; Wang and Evans; Yue). The interpretation of the polarity pattern found in the western loess plateau still is not unambiguous. In the central part, certain polarity boundaries, such as the Brunhes/Matuyama (B/M) boundary, are found in slightly different stratigraphic positions (Hus et al.; Yue). In deep-sea sediments the lock-in depth of natural remanent magnetization (NRM) at the B/M boundary seems to be a linear function of sedimentation rate (de Menocal et al.). Although the magnetization process in the Chinese loess is not well understood, detailed records of polarity transitions have been reported for the B/M and the Jaramillo R→N transition (Ma et al.; Rolph).


    Chih Ted YANG


    @@ The river systems observed today is the cumulative result of surface, rill, and gully erosion, and sediment transport, scour, and deposition. The divisions of approach between these two related areas are man-made, and are not based on sound science. Most of the erosion studies are done by geologists and agricultural engineers who are concerned of the surface, rill, and gully erosion and the loss of agricultural land productivity. Hydraulic engineers are more interested in the study of sediment transport, scour, and deposition, and their impacts on river engineering and hydraulic structures in rivers and reservoirs. Erosion studies are often based on empirical relationships or field data to determinate the annual sediment yield from a watershed. On the other hand, hydraulic engineers focus their attention on solving equations based on assumed initial and boundary conditions with a time scale of days, hours, or seconds. Both approaches have their complementary strengths and weaknesses. It is important to provide a forum for specialists in both areas to communicate, exchange ideas, and learn from each other.

  18. Beryllium Desorption from Sediments

    Boschi, V.; Willenbring, J. K.


    Beryllium isotopes have provided a useful tool in the field of geochronology and geomorphology over the last 25 years. The amount of cosmogenic meteoric 10Be and native 9Be absorbed to soils often scales with the residence time and chemical weathering of sediments in a landscape, respectively. Thus, the concentrations in river sediment may be used to quantify the denudation of specific watersheds. When deposited in ocean sediment, these concentrations are thought to record the history of denudation on Earth over the last ~10 Ma. The use of both isotopes often relies on the premise of beryllium retention to sediment surfaces in order to preserve a landscape's erosion and weathering signature. Changes in setting, en route from the soil to fluvial system to the ocean, can cause beryllium desorption and may preclude some applications of the 10Be/9Be system. Four mechanisms were tested to determine the desorption potential of beryllium including a reduction in pH, an increase in ionic strength and complexation with soluble organic and inorganic species. These processes have the potential to mobilize beryllium into solution. For example, by both reducing the pH and increasing the ionic strength, competition for adsorption sites increases, potentially liberating beryllium from the sediment surface. In addition, organic and inorganic ligands can complex beryllium causing it to become mobilized. To determine which of these alterations influence beryllium desorption and to quantify the effect, we prepared separate solutions of beryllium bound to minerals and organic compounds and measured beryllium concentrations in solution before and after adjusting the pH, ionic strength, and changing inorganic and organic ligand concentrations. We conclude from our observations that overall, beryllium sorbed to organic compounds was more resistant to desorption relative to mineral-associated beryllium. Among the methods tested, a reduction in pH resulted in the greatest amount of

  19. Cyclic Sediment Trading Between Channel and River Bed Sediments

    Haddadchi, A.


    Much of the previous work on sediment tracing has focused on determining either the initial sources of the sediment (soils derive from a particular rock type) or the erosion processes generating the sediment. However, alluvial stores can be both a source and sink for sediment transported by streams. Here geochemical and fallout radionuclide tracing of river-bed and alluvial sediments are used to determine the role of secondary sources, sediment stores, as potential sources of sediment leaving Emu Creek catchment, southeastern Queensland, Australia. Activity concentrations of 137Cs on the river sediments are consistent with channel erosion being the dominant source at all sites sampled along the river. To characterise the deposition and remobilisation cycles in the catchment, a novel geochemical tracing approach was used. Successive pockets of alluvium were treated as discrete sink terms within geochemical mixing models and their source contributions compared with those of river bed sediments collected adjacent to each alluvial pocket. Three different size fractions were examined; silts and clays (soil/rock type sources to river bed and alluvial sediments at each sampling site was identical for all three different size fractions, but varied along the stream. Combining these findings it is concluded that proximal alluvial stores dominated the supply of sediment to the river at each location, with this being particularly evident at the catchment outlet. Identical contribution of rock type sources to both river bed and alluvial pockets together with the dominant erosion being from channel banks indicates a high degree of 'trading' between the fluvial space and the alluvial space. Hence, management works aimed at primarily reducing the supply of sediments to the outlet of Emu Creek should focus on rehabilitation of channel banks in the lower catchment.

  20. Respiration in ocean margin sediments

    Andersson, J.H.


    The aim of this thesis was the study of respiration in ocean margin sediments and the assessments of tools needed for this purpose. The first study was on the biological pump and global respiration patterns in the deep ocean using an empirical model based on sediment oxygen consumption data. In this thesis the depth dependence of respiration patterns was modelled using a compiled data set of sediment oxygen consumption rates. We showed that the depth relationship can best be described by a do...

  1. Sediment yields of Wisconsin streams

    Hindall, S.M.; Flint, R.F.


    Sediment in Wisconsin streams causes economic and engineering problems in water management and reduces the value of water for nearly all uses. Sediment produces problems such as reduced reservoir capacity, navigation hazards, increased cost of water treatment, property damage, temporary loss of farmland, destruction of feeding and nesting grounds of fish, and destruction of wildlife habitat. Sediment in water also reduces the aesthetic value of surface waters and is detrimental to the State's tourist and recreation industry.

  2. Sediment Geo-Probe System

    Federal Laboratory Consortium — FUNCTION: Provides wideband in situ measurement capability of compressional wave speed and attenuation and their spatial variability in marine sediments.DESCRIPTION:...


    Chih Ted YANG; Caian HUANG


    The paper provides a comprehensive testing of the applicability of 13 sediment transport formulas under different flow and sediment conditions. The dimensionless parameters used for testing the reliability and sensitivity of formulas are dimensionless particle diameter, relative depth, Froude number, relative shear velocity, dimensionless unit stream power, and sediment concentration. A total of 3,391 sets of laboratory and river data are used in the tests. Engineers may find the test results useful to their selection of formulas under different flow and sediment conditions.

  4. Transport model of underground sediment in soils.

    Jichao, Sun; Guangqian, Wang


    Studies about sediment erosion were mainly concentrated on the river channel sediment, the terrestrial sediment, and the underground sediment. The transport process of underground sediment is studied in the paper. The concept of the flush potential sediment is founded. The transport equation with stable saturated seepage is set up, and the relations between the flush potential sediment and water sediment are discussed. Flushing of underground sediment begins with small particles, and large particles will be taken away later. The pore ratio of the soil increases gradually. The flow ultimately becomes direct water seepage, and the sediment concentration at the same position in the water decreases over time. The concentration of maximal flushing potential sediment decreases along the path. The underground sediment flushing model reflects the flushing mechanism of underground sediment.

  5. Optical sedimentation recorder

    Bishop, James K.B.


    A robotic optical sedimentation recorder is described for the recordation of carbon flux in the oceans wherein both POC and PIC particles are captured at the open end of a submersible sampling platform, the captured particles allowed to drift down onto a collection plate where they can be imaged over time. The particles are imaged using three separate light sources, activated in sequence, one source being a back light, a second source being a side light to provide dark field illumination, and a third source comprising a cross polarized light source to illuminate birefringent particles. The recorder in one embodiment is attached to a buoyancy unit which is capable upon command for bringing the sedimentation recorder to a programmed depth below the ocean surface during recordation mode, and on command returning the unit to the ocean surface for transmission of recorded data and receipt of new instructions. The combined unit is provided with its own power source and is designed to operate autonomously in the ocean for extended periods of time.

  6. Modeling microalgal flocculation and sedimentation

    Salim, S.; Gilissen, L.J.W.J.; Rinzema, A.; Vermuë, M.H.; Wijffels, R.H.


    In this study, a combined flocculation and sedimentation model is developed. The model predicts the time needed to reach a desired concentration of microalgal suspension in a sedimentation tank. The concentration of the particles as function of the time and the position in the tank is described. The

  7. Reservoir sedimentation; a literature survey

    Sloff, C.J.


    A survey of literature is made on reservoir sedimentation, one of the most threatening processes for world-wide reservoir performance. The sedimentation processes, their impacts, and their controlling factors are assessed from a hydraulic engineering point of view with special emphasis on mathematic

  8. Reservoir sedimentation; a literature survey

    Sloff, C.J.


    A survey of literature is made on reservoir sedimentation, one of the most threatening processes for world-wide reservoir performance. The sedimentation processes, their impacts, and their controlling factors are assessed from a hydraulic engineering point of view with special emphasis on mathematic

  9. Luminescence dating of Netherland's sediments

    Wallinga, J.; Davids, F.; Dijkmans, J.W.A.


    Over the last decades luminescence dating techniques have been developed that allow earth scientists to determine the time of deposition of sediments. In this contribution we revity: 1) the development of the methodology, 2) tests of the reliability of luminescence dating on Netherlands' sediments;

  10. Intensive landfarming of contaminated sediments

    Wieggers, H.J.J.; Bezemer, H.W.


    The biodegradation of polycyclic aromatic hydrocarbons (PAH) and mineral oil was investigated in heavily and normally polluted sediments. The aims of the research were: to improve the knowledge of dewatering and ripening of sediments in an open land-farm, to quantify the biodegradation in two sedime

  11. Respiration in ocean margin sediments

    Andersson, J.H.


    The aim of this thesis was the study of respiration in ocean margin sediments and the assessments of tools needed for this purpose. The first study was on the biological pump and global respiration patterns in the deep ocean using an empirical model based on sediment oxygen consumption data. In this

  12. Respiration in ocean margin sediments

    Andersson, J.H.


    The aim of this thesis was the study of respiration in ocean margin sediments and the assessments of tools needed for this purpose. The first study was on the biological pump and global respiration patterns in the deep ocean using an empirical model based on sediment oxygen consumption data.

  13. Reservoir sedimentation; a literature survey

    Sloff, C.J.


    A survey of literature is made on reservoir sedimentation, one of the most threatening processes for world-wide reservoir performance. The sedimentation processes, their impacts, and their controlling factors are assessed from a hydraulic engineering point of view with special emphasis on

  14. Modelling of Suspended Sediment Discharge for Masinga ...

    Sedimentation models however, require suspended load as the basic input data. ... at the two mouths of the reservoir, at the confluence, and near the dam wall. ... Dredging out fine sediments, construction of sedimentation basins at the two ...

  15. Study on the Reutilization of River Sediment

    LIU Gui-yun; JIANG Pei-hua; XI Dan-li


    Main components and properties of river sediment are introduced. Secondary pollution of river sediments to the water quality of the river is clarified. The methods of the reutilization of river sediment are elucidated.

  16. Geochemistry of Sediments from the PLUTO Database

    U.S. Geological Survey, Department of the Interior — Geochemical data for unconsolidated sediments (stream sediments, lake sediments, etc.) collected in the US and analyzed by the USGS. These data were originally...

  17. Targeting sediment management strategies using sediment quantification and fingerprinting methods

    Sherriff, Sophie; Rowan, John; Fenton, Owen; Jordan, Phil; hUallacháin, Daire Ó.


    Cost-effective sediment management is required to reduce excessive delivery of fine sediment due to intensive land uses such as agriculture, resulting in the degradation of aquatic ecosystems. Prioritising measures to mitigate dominant sediment sources is, however, challenging, as sediment loss risk is spatially and temporally variable between and within catchments. Fluctuations in sediment supply from potential sources result from variations in land uses resulting in increased erodibility where ground cover is low (e.g., cultivated, poached and compacted soils), and physical catchment characteristics controlling hydrological connectivity and transport pathways (surface and/or sub-surface). Sediment fingerprinting is an evidence-based management tool to identify sources of in-stream sediments at the catchment scale. Potential sediment sources are related to a river sediment sample, comprising a mixture of source sediments, using natural physico-chemical characteristics (or 'tracers'), and contributions are statistically un-mixed. Suspended sediment data were collected over two years at the outlet of three intensive agricultural catchments (approximately 10 km2) in Ireland. Dominant catchment characteristics were grassland on poorly-drained soils, arable on well-drained soils and arable on moderately-drained soils. High-resolution (10-min) calibrated turbidity-based suspended sediment and discharge data were combined to quantify yield. In-stream sediment samples (for fingerprinting analysis) were collected at six to twelve week intervals, using time-integrated sediment samplers. Potential sources, including stream channel banks, ditches, arable and grassland field topsoils, damaged road verges and tracks were sampled, oven-dried (account for particle size and organic matter selectivity processes. Contributions from potential sources type groups (channel - ditches and stream banks, roads - road verges and tracks, fields - grassland and arable topsoils) were

  18. Dating of sediments and determination of sedimentation rate. Proceedings

    Illus, E. [ed.


    The Second NKS (Nordic Nuclear Safety Research)/EKO-1 Seminar was held at the Finnish Centre for Radiation and Nuclear Safety (STUK) on April 2-3, 1997. The work of the NKS is based on 4-year programmes; the current programme having been planned for the years 1994-1997. The programme comprises 3 major fields, one of them being environmental effects (EKO). Under this umbrella there are 4 main projects. The EKO-1 project deals with marine radioecology, in particular bottom sediments and sediment processes. The programme of the second seminar consisted of 8 invited lecturers and 6 other scientific presentations. Dating of sediments and determination of sedimentation rate are important in all types of sedimentological study and model calculations of fluxes of substances in the aquatic environment. In many cases these tasks have been closely related to radioecological studies undertaken in marine and fresh water environments, because they are often based on measured depth profiles of certain natural or artificial radionuclides present in the sediments. During recent decades Pb-210 has proved to be very useful in dating of sediments, but some other radionuclides have also been successfully used, e.g. Pu-239,240, Am-241 and Cs-137. The difficulties existing and problems involved in dating of sediments, as well as solutions for resolving these problems are discussed in the presentations

  19. Birds of Mount Kisingiri, Nyanza Province, including a preliminary ...

    production. ..... A single, vocal bird, was seen foraging from the tops of a tall dead forest tree near .... Birds were considerably more vocal in January and February .... recording revealed a note frequency centred at 3.48 kHz, with a duration of ...


    Lama-Ramirez, R.; Facultad de Química e Ingeniería Química, Departamento Académico de Operaciones Unitarias,Universidad Nacional Mayor de San Marcos,Lima,Perú.; Condorhuamán-Ccorimanya, C.; Facultad de Química e Ingeniería Química, Departamento Académico de Operaciones Unitarias,Universidad Nacional Mayor de San Marcos,Lima,Perú.


    We have studied the batch sedimentation of aqueous suspensions of precipitated calcium carbonate, barium sulfate and lead oxide settlers inclined rectangular and circular cross section. The énguio tilt with respect to the horizontal between 35 ° and 75 °, to suspensions that vary in strength between 39.4 and 1070 g / l.Las obtained apparent sedimentation velocities ranging from 0.071 to 17.6 cm / min. the apparent sedimentation rate has been correlated using a modified version of the equation...

  1. Haw River sediment quality assessment

    US Fish and Wildlife Service, Department of the Interior — This report documents an evaluation of chemical contaminants in, and toxicity of, sediments collected from impoundments created by dams on the Haw River in Alamance...




    Withdrawal of water from a river into a canal involves the construction of a barrage or a dam across the river depending on whether the river is perennial or not. The design of the reservoir upstream of the dam and of the canal requires consideration of the sediment load carried by the river in case the river is sediment-laden. The basic equations concerning morphological changes in such rivers are discussed with particular reference to computation of reservoir sedimentation. The hydraulics of lined canals carrying wash load is examined from the point of view of limiting transport capacity and changes in frictional resistance. Lastly,the methods of design of sediment extraction devices like settling basins and vortex chambers are presented.


    Mohammed-Studies on Benthic denitrification in the Chwaka bay mangrove. Extensive mangrove ... In this case, six sediment cores were taken randomly from the three study sites as above and a ..... Academic Press. Orlando. pp. 277-293.

  4. Kanawha River Basin Sediment Data

    U.S. Environmental Protection Agency — This data set contains sediment size data collected at research sites using a Wolman Pebble Count method. This dataset is associated with the following publication:...

  5. Cable Bacteria in Freshwater Sediments

    Risgaard-Petersen, Nils; Kristiansen, Michael; Frederiksen, Rasmus


    In marine sediments cathodic oxygen reduction at the sediment surface can be coupled to anodic sulfide oxidation in deeper anoxic layers through electrical currents mediated by filamentous, multicellular bacteria of the Desulfobulbaceae family, the so-called cable bacteria. Until now, cable...... marine cable bacteria, with the genus Desulfobulbus as the closest cultured lineage. The results of the present study indicate that electric currents mediated by cable bacteria could be important for the biogeochemistry in many more environments than anticipated thus far and suggest a common evolutionary...... bacteria have only been reported from marine environments. In this study, we demonstrate that cable bacteria also occur in freshwater sediments. In a first step, homogenized sediment collected from the freshwater stream Giber Å, Denmark, was incubated in the laboratory. After 2 weeks, pH signatures...

  6. Seafloor Surficial Sediments (Deck 41)

    National Oceanic and Atmospheric Administration, Department of Commerce — The National Geophysical Data Center (NGDC) "Deck41" database contains surficial sediment descriptions for over 36,000 seafloor samples worldwide. The file was begun...

  7. Luminescence dating of Netherlands’ sediments

    Wallinga, J.; Davids, F.; Dijkmans, J.W.A.


    Over the last decades luminescence dating techniques have been developed that allow earth scientists to determine the time of deposition of sediments. In this contribution we review: 1) the development of the methodology; 2) tests of the reliability of luminescence dating on Netherlands’ sediments; and 3) geological applications of the method in the Netherlands. Our review shows that optically stimulated luminescence dating of quartz grains using the single aliquot regenerative dose method yi...

  8. Mathematical theory of sedimentation analysis

    Fujita, Hiroshi; Van Rysselberghe, P


    Mathematical Theory of Sedimentation Analysis presents the flow equations for the ultracentrifuge. This book is organized into two parts encompassing six chapters that evaluate the systems of reacting components, the differential equations for the ultracentrifuge, and the case of negligible diffusion. The first chapters consider the Archibald method for molecular weight determination; pressure-dependent sedimentation; expressions for the refractive index and its gradient; relation between refractive index and concentration; and the analysis of Gaussian distribution. Other chapters deal with th

  9. Reservoir Operation to Minimize Sedimentation

    Dyah Ari Wulandari


    Full Text Available The Wonogiri Reservoir capacity decreases rapidly, caused by serious sedimentation problems. In 2007, JICA was proposed a sediment storage reservoir with a new spillway for the purpose of sediment flushing / sluicing from The Keduang River. Due to the change of reservoir storage and change of reservoir system, it requires a sustainable reservoir operation technique. This technique is aimed to minimize the deviation between the input and output of sediments. The main objective of this study is to explore the optimal Wonogiri reservoir operation by minimizing the sediment trap. The CSUDP incremental dynamic programming procedure is used for the model optimization.  This new operating rules will also simulate a five years operation period, to show the effect of the implemented techniques. The result of the study are the newly developed reservoir operation system has many advantages when compared to the actual operation system and the disadvantage of this developed system is that the use is mainly designed for a wet hydrologic year, since its performance for the water supply is lower than the actual reservoir operations.Doi: 10.12777/ijse.6.1.16-23 [How to cite this article:  Wulandari, D.A., Legono, D., and Darsono, S., 2014. Reservoir Operation to Minimize Sedimentation. International Journal of Science and Engineering, 5(2,61-65. Doi: 10.12777/ijse.6.1.16-23] Normal 0 false false false EN-US X-NONE X-NONE

  10. River sediment supply, sedimentation and transport of the highly turbid sediment plume in Malindi Bay, Kenya

    JOHNSON U.Kitheka


    The paper presents results of a study on the sediment supply and movement of highly turbid sediment plume within Malindi Bay in the Northern region of the Kenya coast.The current velocities,tidal elevation,salinity and suspended sediment concentrations (TSSC)were measured in stations located within the bay using Aanderaa Recording Current Meter (RCM-9),Turbidity Sensor mounted on RCM-9,Divers Gauges and Aanderaa Temperature-Salinity Meter.The study established that Malindi Bay receives a high terrigenous sediment load amounting to 5.7 × 106 ton·yr-1.The river freshwater supply into the bay is highly variable ranging from 7 to 680 m3·s-1.The high flows that are > 150 m3·s-1 occurred in May during the South East Monsoon (SEM).Relatively low peak flows occurred in November during the North East Monsoon (NEM) but these were usually <70 m3·s-1.The discharge of highly turbidity river water into the bay in April and May occurs in a period of high intensity SEM winds that generate strong north flowing current that transports the river sediment plume northward.However,during the NEM,the river supply of turbid water is relatively low occurring in a period of relatively low intensity NEM winds that result in relatively weaker south flowing current that transports the sediment plume southward.The mechanism of advection of the sediment plume north or south of the estuary is mainly thought to be due to the Ekman transport generated by the onshore monsoon winds.Limited movement of the river sediment plume southward towards Ras Vasco Da Gama during NEM has ensured that the coral reef ecosystem in the northern parts of Malindi Marine National Park has not been completely destroyed by the influx of terrigenous sediments.However,to the north there is no coral reef ecosystem.The high sediment discharge into Malindi Bay can be attributed to land use change in the Athi-Sabaki River Basin in addition to rapid population increase which has led to clearance of forests to open land

  11. Cable Bacteria in Freshwater Sediments.

    Risgaard-Petersen, Nils; Kristiansen, Michael; Frederiksen, Rasmus B; Dittmer, Anders Lindequist; Bjerg, Jesper Tataru; Trojan, Daniela; Schreiber, Lars; Damgaard, Lars Riis; Schramm, Andreas; Nielsen, Lars Peter


    In marine sediments cathodic oxygen reduction at the sediment surface can be coupled to anodic sulfide oxidation in deeper anoxic layers through electrical currents mediated by filamentous, multicellular bacteria of the Desulfobulbaceae family, the so-called cable bacteria. Until now, cable bacteria have only been reported from marine environments. In this study, we demonstrate that cable bacteria also occur in freshwater sediments. In a first step, homogenized sediment collected from the freshwater stream Giber Å, Denmark, was incubated in the laboratory. After 2 weeks, pH signatures and electric fields indicated electron transfer between vertically separated anodic and cathodic half-reactions. Fluorescence in situ hybridization revealed the presence of Desulfobulbaceae filaments. In addition, in situ measurements of oxygen, pH, and electric potential distributions in the waterlogged banks of Giber Å demonstrated the presence of distant electric redox coupling in naturally occurring freshwater sediment. At the same site, filamentous Desulfobulbaceae with cable bacterium morphology were found to be present. Their 16S rRNA gene sequence placed them as a distinct sister group to the known marine cable bacteria, with the genus Desulfobulbus as the closest cultured lineage. The results of the present study indicate that electric currents mediated by cable bacteria could be important for the biogeochemistry in many more environments than anticipated thus far and suggest a common evolutionary origin of the cable phenotype within Desulfobulbaceae with subsequent diversification into a freshwater and a marine lineage.

  12. Precambrian clastic sedimentation systems

    Eriksson, P. G.; Condie, K. C.; Tirsgaard, H.; Mueller, W. U.; Altermann, W.; Miall, A. D.; Aspler, L. B.; Catuneanu, O.; Chiarenzelli, J. R.


    The unique and evolving nature of the Precambrian geological environment in many ways was responsible for significant differences between Precambrian clastic sedimentary deposits and their Phanerozoic-modern equivalents. Some form of plate tectonics, with rapid microplate collisions and concomitant volcanic activity, is inferred to have led to the formation of greenstone belts. Explosive volcanism promoted common gravity-flow deposits within terrestrial greenstone settings, with braided alluvial, wave/storm-related and tidal coastline sediments also being preserved. Late Archaean accretion of greenstone terranes led to emergence of proto-cratons, where cratonic and rift sedimentary assemblages developed, and these became widespread in the Proterozoic as cratonic plates stabilised. Carbonate deposition was restricted by the paucity of stable Archaean terranes. An Early Precambrian atmosphere characterised by greenhouse gases, including CO 2, in conjunction with a faster rotation of the Earth and reduced albedo, provide a solution to the faint young Sun paradox. As emergent continental crust developed, volcanic additions of CO 2 became balanced by withdrawal due to weathering and a developing Palaeoproterozoic microbial biomass. The reduction in CO 2, and the photosynthetic production of O 2, led to aerobic conditions probably being achieved by about 2 Ga. Oceanic growth was allied to atmospheric development, with approximately 90% of current ocean volume being reached by about 4 Ga. Warm Archaean and warm, moist Palaeoproterozoic palaeoclimates appear to have become more arid after about 2.3 Ga. The 2.4-2.3 Ga Huronian glaciation event was probably related to continental growth, supercontinent assembly and weathering-related CO 2 reduction. Despite many analogous features among both Precambrian and younger sedimentary deposits, there appear to be major differences as well. Two pertinent examples are rare unequivocal aeolian deposits prior to about 1.8 Ga and an

  13. Data Evaluation Report for the Lower Rouge River Sediment Investigation

    Describes a study of contaminated sediment, analyzes results, and makes recommendations for sediment remediation. Includes aerial views of study locations, photo log, data tables of sediment analysis.

  14. Modeling microalgal flocculation and sedimentation.

    Salim, S; Gilissen, L; Rinzema, A; Vermuë, M H; Wijffels, R H


    In this study, a combined flocculation and sedimentation model is developed. The model predicts the time needed to reach a desired concentration of microalgal suspension in a sedimentation tank. The concentration of the particles as function of the time and the position in the tank is described. The model was validated with experimental data for Ettlia texensis. The concentration changes measured in time at different heights in the sedimentation vessel corresponded well with model predictions. The model predicts that it takes 25 h to reach a final concentration of 5.2 gDW L(-1), when the initial concentration is 0.26 gDW L(-1) and the tank height is 1m. This example illustrates the use of this model for the design of the settling tank needed for pre-concentration of microalgal biomass before further dewatering.

  15. Hydroxyatrazine in soils and sediments

    Lerch, R.N.; Thurman, E.M.; Blanchard, P.E.


    Hydroxyatrazine (HA) is the major metabolite of atrazine in most surface soils. Knowledge of HA sorption to soils, and its pattern of stream water contamination suggest that it is persistent in the environment. Soils with different atrazine use histories were collected from four sites, and sediments were collected from an agricultural watershed. Samples were exhaustively extracted with a mixed-mode extractant, and HA was quantitated using high performance liquid chromatography with UV detection. Atrazine, deethylatrazine (DEA), and deisopropylatrazine (DIA) were also measured in all samples. Concentrations of HA were considerably greater than concentrations of atrazine, DEA, and DIA in all soils and sediments studied. Soil concentrations of HA ranged from 14 to 640 ??g/kg with a median concentration of 84 ??g/kg. Sediment concentrations of HA ranged from 11 to 96 ??g/kg, with a median concentration of 14 ??g/kg. Correlations of HA and atrazine concentrations to soil properties indicated that HA levels in soils were controlled by sorption of atrazine. Because atrazine hydrolysis is known to be enhanced by sorption and pH extremes, soils with high organic matter (OM) and clay content and low pH will result in greater atrazine sorption and subsequent hydrolysis. Significant correlation of HA concentrations to OM, pH, and cation exchange capacity of sediments indicated that mixed-mode sorption (i.e., binding by cation exchange and hydrophobic interactions) was the mechanism controlling HA levels in sediment. The presence of HA in soils and stream sediments at the levels observed support existing hypotheses regarding its transport in surface runoff. These results also indicated that persistence of HA in terrestrial and aquatic ecosystems is an additional risk factor associated with atrazine usage.

  16. Radiotracer Imaging of Sediment Columns

    Moses, W. W.; O'Neil, J. P.; Boutchko, R.; Nico, P. S.; Druhan, J. L.; Vandehey, N. T.


    Nuclear medical PET and SPECT cameras routinely image radioactivity concentration of gamma ray emitting isotopes (PET - 511 keV; SPECT - 75-300 keV). We have used nuclear medical imaging technology to study contaminant transport in sediment columns. Specifically, we use Tc-99m (T1/2 = 6 h, Eγ = 140 keV) and a SPECT camera to image the bacteria mediated reduction of pertechnetate, [Tc(VII)O4]- + Fe(II) → Tc(IV)O2 + Fe(III). A 45 mL bolus of Tc-99m (32 mCi) labeled sodium pertechnetate was infused into a column (35cm x 10cm Ø) containing uranium-contaminated subsurface sediment from the Rifle, CO site. A flow rate of 1.25 ml/min of artificial groundwater was maintained in the column. Using a GE Millennium VG camera, we imaged the column for 12 hours, acquiring 44 frames. As the microbes in the sediment were inactive, we expected most of the iron to be Fe(III). The images were consistent with this hypothesis, and the Tc-99m pertechnetate acted like a conservative tracer. Virtually no binding of the Tc-99m was observed, and while the bolus of activity propagated fairly uniformly through the column, some inhomogeneity attributed to sediment packing was observed. We expect that after augmentation by acetate, the bacteria will metabolically reduce Fe(III) to Fe(II), leading to significant Tc-99m binding. Imaging sediment columns using nuclear medicine techniques has many attractive features. Trace quantities of the radiolabeled compounds are used (micro- to nano- molar) and the half-lives of many of these tracers are short (Image of Tc-99m distribution in a column containing Rifle sediment at four times.

  17. Beryllium-10 in continental sediments

    Brown, L.; Sacks, I.S.; Tera, F. (Carnegie Institution of Washington, DC (USA). Dept. of Terrestrial Magnetism); Klein, J.; Middleton, R. (Pennsylvania Univ., Philadelphia (USA). Dept. of Physics)


    The concentration of /sup 10/Be has been measured in 10 samples taken from a transect of surface sediments beginning in the Atchafalaya River and extending across the Bay 136 km into the Gulf of Mexico. If corrected for a lower retentivity of sand for Be, they have a concentration that is constant within 13%. This concentration is about an order of magnitude smaller than that of deep ocean sediments. For comparison, measurements of /sup 10/Be in rainwater, in a sample of soil and in a deep ocean core were made.

  18. Sediment reworking rates in deep sediments of the Mediterranean Sea

    Barsanti, M., E-mail: [ENEA, Marine Environment Research Centre, La Spezia (Italy); Delbono, I., E-mail: [ENEA, Marine Environment Research Centre, La Spezia (Italy); Schirone, A., E-mail: [ENEA, Marine Environment Research Centre, La Spezia (Italy); Langone, L., E-mail: [CNR, ISMAR Istituto di Scienze Marine, U.O.S. Bologna (Italy); Miserocchi, S., E-mail: [CNR, ISMAR Istituto di Scienze Marine, U.O.S. Bologna (Italy); Salvi, S., E-mail: [ENEA, Research Centre Brasimone, Camugnano (Italy); Delfanti, R., E-mail: [ENEA, Marine Environment Research Centre, La Spezia (Italy)


    Different pelagic areas of the Mediterranean Sea have been investigated in order to quantify physical and biological mixing processes in deep sea sediments. Herein, results of eleven sediment cores sampled at different deep areas (> 2000 m) of the Western and Eastern Mediterranean Sea are presented. {sup 210}Pb{sub xs} and {sup 137}Cs vertical profiles, together with {sup 14}C dating, are used to identify the main processes characterising the different areas and, finally, controlling mixing depths (SML) and bioturbation coefficients (D{sub b}). Radionuclide vertical profiles and inventories indicate that bioturbation processes are the dominant processes responsible for sediment reworking in deep sea environments. Results show significant differences in sediment mixing depths and bioturbation coefficients among areas of the Mediterranean Sea characterised by different trophic regimes. In particular, in the Oran Rise area, where the Almeria-Oran Front induces frequent phytoplankton blooms, we calculate the highest values of sediment mixing layers (13 cm) and bioturbation coefficients (0.187 cm{sup 2} yr{sup -1}), and the highest values of {sup 210}Pb{sub xs} and {sup 137}Cs inventories. Intermediate values of SML and D{sub b} ({approx} 6 cm and {approx} 0.040 cm{sup 2} yr{sup -1}, respectively) characterise the mesothrophic Algero-Balearic basin, while in the Southern Tyrrhenian Sea mixing parameters (SML of 3 cm and D{sub b} of 0.011 cm{sup 2} yr{sup -1}) are similar to those calculated for the oligotrophic Eastern Mediterranean (SML of 2 cm and D{sub b} of {approx} 0.005 cm{sup 2} yr{sup -1}). - Research highlights: {yields} Physical and biological mixing processes in the Mediterranean Sea are investigated. {yields} Results of 11 sediment cores in deep areas of the Mediterranean Sea are shown. {yields} {sup 210}Pb{sub xs} and {sup 137}Cs vertical profiles are analysed. {yields} New data on {sup 210}Pb and {sup 137}Cs inventories of Mediterranean deep sediments are



    Total sediment transport under the action of flow includes generally three forms of sediment transport, suspended load, density current and bed load. How to realize simultaneously these three forms of sediment movement in an identical physical model was studied in this paper. For the suspended load, fall and pickup similarities were used to design sediment gradation, and similarities of sediment-carrying capacity and scouring and depositing time were be insured. For the density current its occurrence condition should be similar, and similarities of sediment concentration and depositing time were insured. For the bed load, sediment gradation was designed by the similarity of incipient motion, and similarities of sediment discharge and scouring and depositing time were satisfied. And a physical model test was conducted.

  20. Biota-Sediment Accumulation Factor Data

    U.S. Environmental Protection Agency — The Biota-Sediment Accumulation Factor contains approximately 20,000 biota-sediment accumulation factors (BSAFs) from 20 locations (mostly Superfund sites) for...

  1. Green PCB Remediation from Sediment Systems Project

    National Aeronautics and Space Administration — The GPRSS technology is an in situ remediation technique for PCB-contaminated sediments. The technique provides an effective and safe method for sediment cleanup...

  2. Longshore sediment transport along the Indian coast

    Chandramohan, P.; Nayak, B.U.

    An empirical sediment transport model has been developed based on longshore energy flux equation. Ship reported waves, published in Indian Daily Weather Reports, are compiled for 19 y and used for estimation of sediment transport. Annual gross...

  3. Identification of carotenals in sediments

    Hopmans, E.C.; Schouten, S.; Rijpstra, W.I.C.; Sinninghe Damsté, J.S.


    High performance liquid chromatography with photodiode array UV–Vis detection and atmospheric pressure chemical ionization mass spectrometry was used to analyze sediment samples from the meromictic Ace Lake (Antarctica), as well as a Pliocene sapropel from the Mediterranean Sea and a Miocene marl

  4. Sediment transport under breaking waves

    Christensen, Erik Damgaard; Hjelmager Jensen, Jacob; Mayer, Stefan


    generated at the surface where the wave breaks as well as the turbulence generated near the bed due to the wave-motion and the undertow. In general, the levels of turbulent kinetic energy are found to be higher than experiments show. This results in an over prediction of the sediment transport. Nevertheless...

  5. Gradation effects in sediment transport

    de Meijer, RJ; Bosboom, J; Cloin, B; Katopodi, [No Value; Kitou, N; Koomans, RL; Manso, F


    To determine the effects of grain size and density gradation in oscillatory sheet-flow, experiments are conducted in an oscillating water tunnel. A formal derivation of a schematised transport model shows that the transport rates per sediment fraction can be determined with and without the assumptio

  6. Black carbon in marine sediments

    Middelburg, J.J.; Nieuwenhuize, J.; Van Breugel, P.


    Concentrations of black carbon were determined for a number of marine sediments. A comparison of black carbon based on thermal oxidation and hot concentrated nitric acid pretreatments revealed that the latter significantly overestimates combustion derived carbon phases. Black carbon accounts for


    Chih Ted YANG


    This paper provides a step-by-step derivation of the sediment transport functions by Engelund and Hansen (1967) and by Ackers and White (1973). The theoretical derivations demonstrate that these two functions are closely related to Bagnold's (1966) stream power and efficiency concepts.

  8. Flocculation Dynamics of cohesive sediment

    Maggi, F.


    Cohesive sediment suspended in natural waters is subject not only to transport and deposition processes but also to reactions of flocculation, \\textit{i.e.} aggregation of fine particles, and breakup of aggregates. Although aggregation and breakup occur at small and very small length scales compared

  9. Sediment Management Options for Galveston Island, Texas


    considered the “Face of Galveston.” Sediment Budget Morang (2006) calculated a sediment budget for the north Texas shore between Sabine Pass and San Luis...cross- shore beach profiles. The sediment budget was completed by hand and then the results were added to the Sediment Budget Analysis System (SBAS...University (Dellapenna, personal communications 2003) conducted seismic studies detecting sandy facies offshore of the south jetty making an

  10. Discovering the secrets of the Olifants sediments

    Petersen, C


    Full Text Available in landuse may cause ero- sion, siltation of rivers, unstable river banks and beds and with this mobilisation of sediment associated with pollutants. The sediments often act as a ?sink? for pollutants, which can be released back into the water column..., sedimentation), a knowledge gap existed in the understanding of the transport mechanisms involved. Questions that were raised included: how are sediments reach- ing streams and how are they transported instream? Where are they stored and how do river...

  11. Upstream sediment input effects on experimental dune trough scour in sediment mixtures

    Kleinhans, M.G.


    Understanding causes of dune irregularity, especially dune trough scour, is important for the modeling of vertical sorting of sediment mixtures in morphological models of rivers with sediment mixtures. Sediment in dunes is generally sorted in a fining-upward manner, which affects the sediment transp

  12. Crystal sedimentation and stone formation.

    Baumann, Johannes Markus; Affolter, Beat; Meyer, Rolf


    Mechanisms of crystal collision being the first step of aggregation (AGN) were analyzed for calcium oxalate monohydrate (COM) directly produced in urine. COM was produced by oxalate titration in urine of seven healthy men, in solutions of urinary macromolecules and in buffered distilled water (control). Crystal formation and sedimentation were followed by a spectrophotometer and analyzed by scanning electron microscopy. Viscosity of urine was measured at 37 degrees C. From results, sedimentation rate (v (S)), particle diffusion (D) and incidences of collision of particles in suspension by sedimentation (I (S)) and by diffusion (I (D)) were calculated. Calculations were related to average volume and urinary transit time of renal collecting ducts (CD) and of renal pelvis. v (S) was in urine 0.026 +/- 0.012, in UMS 0.022 +/- 0.01 and in control 0.091 +/- 0.02 cm min(-1) (mean +/- SD). For urine, a D of 9.53 +/- 0.97 mum within 1 min can be calculated. At maximal crystal concentration, I (S) was only 0.12 and I (D) was 0.48 min(-1) cm(-3) which, even at an unrealistic permanent and maximal crystalluria, would only correspond to less than one crystal collision/week/CD, whereas to the same tubular wall being in horizontal position 1.3 crystals/min and to a renal stone 624 crystals/cm(2) min could drop by sedimentation. Sedimentation to renal tubular or pelvic wall, where crystals can accumulate and meet with a tissue calcification or a stone, is probably essential for stone formation. Since v (S) mainly depends on particle size, reducing urinary supersaturation and crystal growth by dietary oxalate restriction seems to be an important measure to prevent aggregation.

  13. Sediment availability on burnt hillslopes

    Nyman, Petter; Sheridan, Gary; Moody, John; Smith, Hugh; Noske, Philip; Lane, Patrick


    In general, erosion has been modeled as being proportional to some form of energy or force (such as shear stress or stream power) with the proportionality constant being erodibility, which is a characterization of sediment availability. It is unclear if erodibility is constant with depth on recently burnt hillslopes. This study used both field- and laboratory based experiments to quantify sediment availability as a depth-dependent parameter on burnt hillslopes. An explicit representation of fire-effect on sediment availability was achieved by assuming that fire-effects produce a non-cohesive soil layer of variable depth. This depth is characterized as a probability density function with a single parameter that changed during recovery (0-3 years) as the available soil was depleted. Measurements in southeastern Australia found that initially after a wildfire the hillslope had a layer (0.75-0.91 cm in depth) of non-cohesive soil, which represented 97-117 t/ha of transport limited sediment. The thickness of this layer decreased exponentially with time since the wildfire. Additional results showed that fine roots (soils for depths soil depth and root density accounted for ~60 % of variation in the erodibility at soil depths soil properties (% silt and clay in particular) became more important as predictors of erodibility. The results are organized into a conceptual framework for modeling fire-effects on sediment availability for systems with low and high pre-fire erodibility. The fire-effect produces an equal depth of non-cohesive soil for both systems but this represents a greater perturbation for systems with low pre-fire erodibility than for those systems with a high pre-fire erodibility.

  14. Sediment-accumulatie in transportleidingen af waterproductiebedrijven

    Beverloo, H.; Vreeburg, J.H.G.; Zwaga, A.


    In drinkwatertransportleidingen hoopt zich sediment op, ondanks het feit dat de maximale stroomsnelheid hoger is dan de snelheid die voor distributieleidingen zelfreinigend is. Opwervelend sediment zorgt voor klachten over de kwaliteit van het drinkwater. Het sediment accumuleert vooral dicht bij he

  15. Optically stimulated luminescence dating of young sediments

    Madsen, A.T.; Murray, A.S.


    Optically stimulated luminescence (OSL) dating of young (< 1000 years) sediments is used increasingly in a wide variety of late-Holocene studies as a mean of establishing contemporary sedimentation rates or the timing of sediment deposition. This paper provides a summary of the basic principles o...

  16. Hawaii Regional Sediment Management (RSM): Regional Sediment Budget for the West Maui Region


    Regional Sediment Management (RSM) Program Hawaii Regional Sediment Management (RSM): Regional Sediment Budget...for the West Maui Region Co as ta l a nd H yd ra ul ic s La bo ra to ry Jessica H. Podoski, Thomas D. Smith, Zeki Demirbilek, Lihwa Lin, Regional Sediment Management (RSM) Program ERDC/CHL TR-16-5 June 2016 Hawaii Regional Sediment

  17. Density gradation in cross-shore sediment transport

    Koomans, RL; de Meijer, RJ


    One of the fundamental properties of a coastline is its sediment composition. Coastal sediments are rarely composed of one type of sediment. Due to these differences, the sediments are sorted on the beach and foreshore. The effect of density variations of the sediment on coastal sediment transport h

  18. Sediment Transport in Rivers and Coastal Waters

    杨树清; 余建星; 王元战


    Following Bagnold′s approach, a relationship between sediment transport and energy dissipation is developed. The major assumption made in the study is that the near bed velocity plays a dominant role in the process of sediment transport. A general relationship between energy dissipation and sediment transport is first proposed. Then the equations for total sediment transport are derived by introducing the appropriate expression of energy dissipation rate under different conditions, such as open channel flows, combination of wave and current, as well as longshore sediment transport. Within the flows investigated, the derived relationships are fairly consistent with the available data over a wide range of conditions.

  19. Modeling Transport of Flushed Reservoir Sediment

    Dubinski, I. M.


    Drawdown flushing of a reservoir is often part of a reservoir sediment management program. Flushing can deliver higher than normal sediment loads to the river channel located downstream of a reservoir. The flushed sediment may contain a higher proportion of finer sediment than what was delivered to a channel prior to the presence of the reservoir. The extent of long-term impacts caused by the flushed sediment on the channel morphology and habitat will in part depend on the residence time of the sediment within the channel. In this study we used MIKE 21C to model the fate of flushed sediment through a river channel where the bed material consists of an armoring layer of gravels overlying finer sediment. MIKE 21C is a two-dimensional curvilinear morphological model for rivers developed by DHI. Curvilinear means that the model grid may curve to better follow the channel and flow direction, for example in a meandering channel. Multiple bed material layers are included in the model to represent the armoring and underlying layers existing in the bed separately from the overlying flushed sediment. These layers may also mix. The nature of the interactions between these two layers helps regulate transport and deposition of the flushed sediment, thus are critical to assessing the fate of the flushed sediment and associated potential impacts.



    For the computation of the sediment quantity released from reservoirs, a vertical two-dimensional hydrodynamic model is combined with a sediment transport model. The hydrodynamic model is based on the equations of mass and momentum conservation along with a k - ε model for closure of the Reynolds stresses. The sediment transport model is based on the convection-diffusion equation of sediment concentration and the sediment continuity equation. Both the hydrodynamic and sediment transport models are developed in a boundary-fitted curvilinear co-ordinate system. Comparison of the predicted mean velocity field with laboratory results indicates that the present model captures most experimental trends with reasonable accuracy. Also good agreement is found in comparison of the sediment transport results for the numerical model and the experimental model.

  1. Machine learning in sedimentation modelling.

    Bhattacharya, B; Solomatine, D P


    The paper presents machine learning (ML) models that predict sedimentation in the harbour basin of the Port of Rotterdam. The important factors affecting the sedimentation process such as waves, wind, tides, surge, river discharge, etc. are studied, the corresponding time series data is analysed, missing values are estimated and the most important variables behind the process are chosen as the inputs. Two ML methods are used: MLP ANN and M5 model tree. The latter is a collection of piece-wise linear regression models, each being an expert for a particular region of the input space. The models are trained on the data collected during 1992-1998 and tested by the data of 1999-2000. The predictive accuracy of the models is found to be adequate for the potential use in the operational decision making.

  2. Vertical distribution of sediment concentration

    Sai-hua HUANG; Zhi-lin SUN; Dan XU; Shan-shan XIA


    A simple formula is proposed to predict the vertical distribution of a suspended load concentration in a 2D steady turbulent flow.The proposed formula significantly improves the well-known Rouse formula where sediment concentration has an infinitely large value at the channel bottom and a zero value at the water surface.Based on this formula and the logarithmic ve-locity profile,a theoretical elementary function for the transport rate of a suspended load is developed.This equation improves the Einstein equation in which the unit-width suspended sediment discharge must be solved by numerical integration and a contra-diction between the lower limit of the integral and that of velocity distribution exists.




    By means of a test flume with semi-circular cross-section, bedload and suspended-sediment transport of non-cohesive material have been studied in transient flow. The experimental facility enables us to investigate the time evolution of friction and transport parameters. Preliminary measurements with a fixed bottom instead of a sediment bed yield a reliable assessment of flow and friction characteristics. Time sequence in unsteady flow of the relevant parameters is revealed. The influence of turbulence variation and shear stress variation on the transport is investigated. As existing transport equations are found to be in poor agreement with experimental data, a new "engineering" concept is constructed which relates friction velocity to transport.


    Ellen WOHL; Sara RATHBURN


    Many reservoirs currently in operation trap most or all of the sediment entering the reservoir,creating sediment-depleted conditions downstream. This may cause channel adjustment in the form of bank erosion, bed erosion, substrate coarsening, and channel planform change. Channel adjustment may also result from episodic sediment releases during reservoir operation, or from sediment evacuation following dam removal. Channel adjustment to increased sediment influx depends on the magnitude, frequency, duration and grain-size distribution of the sediment releases, and on the downstream channel characteristics. Channel adjustment may occur as a change in substrate sizedistribution, filling of pools, general bed aggradation, lateral instability, change in channel planform,and/or floodplain aggradation. The increased sediment availability may alter aquatic and riparian habitat, reduce water quality, distribute adsorbed contaminants along the river corridor, and provide germination sites for exotic vegetation. Mitigation of these sedimentation hazards requires: (1)mapping grain-size distribution within the reservoir and estimating the grain-size distributions of sediment that will be mobilized through time; (2) mapping shear stress and sediment transport capacity as a function of discharge on the basis of channel units for the length of the river likely to be affected; (3) mapping potential depositional zones, and aquatic habitat and "acceptable losses," along the downstream channel, and comparing these volumes to the total sediment volume stored in the reservoir as a means of estimating total transport capacity required to mobilize reservoir sediment delivered to the channel; (4) designing discharge and sediment release regime (magnitude, frequency,duration) to minimize adverse downstream impacts; and (5) developing plans to remove, treat, contain,or track contaminants, and to restrict establishment of exotic vegetation. The North Fork Poudre River in Colorado is used to

  5. Monitoring of pollution in sediments

    Renee I. Abdallah


    Full Text Available Polycyclic aromatic hydrocarbons (PAHs and aliphatic hydrocarbons (AHs were analyzed in surface sediments collected from Suez till Hurgharda coasts to establish baseline levels for various types of organic pollutants before the anticipated identification of anthropogenic activities, petrogenic and biogenic. AHs for all samples were dominated by unresolved complex mixture (UCM, and petrogenic mixed with biogenic sources. Results also revealed that sedimentary PAHs mainly originated from pyrolysis sources.

  6. Coastal hypoxia and sediment biogeochemistry

    J. J. Middelburg


    Full Text Available The intensity, duration and frequency of coastal hypoxia (oxygen concentration <63 μM are increasing due to human alteration of coastal ecosystems and changes in oceanographic conditions due to global warming. Here we provide a concise review of the consequences of coastal hypoxia for sediment biogeochemistry. Changes in bottom-water oxygen levels have consequences for early diagenetic pathways (more anaerobic at expense of aerobic pathways, the efficiency of re-oxidation of reduced metabolites and the nature, direction and magnitude of sediment-water exchange fluxes. Hypoxia may also lead to more organic matter accumulation and burial and the organic matter eventually buried is also of higher quality, i.e. less degraded. Bottom-water oxygen levels also affect the organisms involved in organic matter processing with the contribution of metazoans decreasing as oxygen levels drop. Hypoxia has a significant effect on benthic animals with the consequences that ecosystem functions related to macrofauna such as bio-irrigation and bioturbation are significantly affected by hypoxia as well. Since many microbes and microbial-mediated biogeochemical processes depend on animal-induced transport processes (e.g. re-oxidation of particulate reduced sulphur and denitrification, there are indirect hypoxia effects on biogeochemistry via the benthos. Severe long-lasting hypoxia and anoxia may result in the accumulation of reduced compounds in sediments and elimination of macrobenthic communities with the consequences that biogeochemical properties during trajectories of decreasing and increasing oxygen may be different (hysteresis with consequences for coastal ecosystem dynamics.

  7. Sediment transport measurements: Chapter 5

    Diplas, P.; Kuhnle, R.; Gray, J.; Glysson, D.; Edwards, T.; García, Marcelo H.


    Sediment erosion, transport, and deposition in fluvial systems are complex processes that are treated in detail in other sections of this book. Development of methods suitable for the collection of data that contribute to understanding these processes is a still-evolving science. Sediment and ancillary data are fundamental requirements for the proper management of river systems, including the design of structures, the determination of aspects of stream behavior, ascertaining the probable effect of removing an existing structure, estimation of bulk erosion, transport, and sediment delivery to the oceans, ascertaining the long-term usefulness of reservoirs and other public works, tracking movement of solid-phase contaminants, restoration of degraded or otherwise modified streams, and assistance in the calibration and validation of numerical models. This chapter presents techniques for measuring bed-material properties and suspended and bed-load discharges. Well-established and relatively recent, yet adequately tested, sampling equipment and methodologies, with designs that are guided by sound physical and statistical principles, are described. Where appropriate, the theory behind the development of the equipment and guidelines for its use are presented.

  8. Oligocene tectonics and sedimentation, California

    Nilsen, T.H.


    During the Oligocene epoch, California was marked by extensive nonmarine sedimentation, in contrast to its pre-Oligocene and post-Oligocene depositional history. The Oligocene continental deposits are especially widespread in southern California and fill a number of small and generally partly restricted basins. Fluvial facies in many basins prograded over previously deposited lower Tertiary turbidites. Volcanism, from widespread centers, was associated with the nonmarine sedimentation. However, some basins remained marine and a few contain Oligocene turbidites and pelagic sediments deposited at bathyal depths. The Oligocene redbeds of California do not form a post-orogenic molasse sequence comparable to the Old Red Sandstone or Alpine molasse. They are synorogenic and record local uplift of basins and surrounding source areas. Late Cretaceous to contemporary orogenesis in California has been generally characterized by the formation of small restricted basins of variable depth adjacent to small upland areas in response to strike-slip faulting. Deposition of Oligocene redbeds was associated with climatic change from warm and humid to cold and semiarid, and a global lowering of sea level. Oligocene tectonism occurred during the transition from subduction of the Farallon Plate to initiation of the modern San Andreas transform system. However, the major influence that caused uplift, formation of fault-bounded basins, and extensive redbed deposition, especially in southern California, was the approach of the Pacific-Farallon spreading ridge to the western margin of California. ?? 1984.

  9. Field tests of nylon-screen diffusion samplers and pushpoint samplers for detection of metals in sediment pore water, Ashland and Clinton, Massachusetts, 2003

    Zimmerman, Marc J.; Vroblesky, Don A.; Campo, Kimberly W.; Massey, Andrew J.; Scheible, Walter


    Efficient and economical screening methods are needed to detect and to determine the approximate concentrations of potentially toxic trace-element metals in shallow groundwater- discharge areas (pore water) where the metals may pose threats to aquatic organisms; such areas are likely to be near hazardous-waste sites. Pushpoint and nylon-screen diffusion samplers are two complementary options for use in such environments. The pushpoint sampler, a simple well point, is easy to insert manually and to use. Only 1 day is required to collect samples. The nylon-screen diffusion sampler is well suited for use in sediments that do not allow a pump to draw water into a pushpoint sampler. In this study, both types of devices were used in sediments suitable for the use of the pushpoint sampler. Sampling with the nylon-screen diffusion sampler requires at least two site visits: one to deploy the samplers in the sediment, and a second to retrieve the samplers and collect the samples after a predetermined equilibration period. Extensive laboratory quality-control studies, field testing, and laboratory analysis of samples collected at the Nyanza Chemical Waste Dump Superfund site along the Sudbury River in Ashland, Massachusetts, and at a Superfund site-assessment location on Rigby Brook in Clinton, Massachusetts, indicate that these two devices yield comparable results for most metals and should be effective tools for pore-water studies. The nylon-screen diffusion samplers equilibrated within 1-2 days in homogeneous, controlled conditions in the laboratory. Nylon-screen diffusion samplers that were not purged of dissolved oxygen prior to deployment yielded results similar to those that were purged. Further testing of the nylon-screen diffusion samplers in homogeneous media would help to resolve any ambiguities about the data variability from the field studies. Comparison of data from replicate samples taken in both study areas shows that even samples taken from sites within a

  10. Quantification of Gravel Rural Road Sediment Production

    Silliman, B. A.; Myers Toman, E.


    Unbound rural roads are thought to be one of the largest anthropogenic sources of sediment reaching stream channels in small watersheds. This sediment deposition can reduce water quality in the streams negatively impacting aquatic habitat as well as impacting municipal drinking water sources. These roads are thought to see an increase in construction and use in southeast Ohio due to the expansion of shale gas development in the region. This study set out to quantify the amount of sediment these rural roads are able to produce. A controlled rain event of 12.7 millimeters of rain over a half hour period was used to drive sediment production over a 0.03 kilometer section of gravel rural road. These 8 segments varied in many characteristics and produced from 2.0 to 8.4 kilograms of sediment per 0.03 kilometers of road with the average production over the 8 segments being 5.5 kilograms of sediment. Sediment production was not strongly correlated with road segment slope but traffic was found to increase sediment production from 1.1 to 3.9 times as much sediment after traffic use. These results will help inform watershed scale sediment budgeting, and inform best management practices for road maintenance and construction. This study also adds to the understanding of the impacts of rural road use and construction associated with the changing land use from agricultural to natural gas extraction.

  11. Stand-level growth and yield component models for red oak-sweetgum forests on Mid-South minor stream bottoms

    Emily B. Schultz; J. Clint Iles; Thomas G. Matney; Andrew W. Ezell; James S. Meadows; Theodor D. Leininger; al. et.


    Greater emphasis is being placed on Southern bottomland hardwood management, but relatively few growth and yield prediction systems exist that are based on sufficient measurements. We present the aggregate stand-level expected yield and structural component equations for a red oak (Quercus section Lobatae)-sweetgum (Liquidambar styraciflua L.) growth and yield model....

  12. Sediment load reduction in Chinese rivers

    Cheng LIU; Jueyi SUI; Zhao-Yin WANG


    In this Paper,the changes in the annual runoff and sediment transport have been assessed by using the long term observation data from 10 gauging stations on 10 large rivers across China from far north to far south.It is found that the annual sediment yield has generally had a decreasing trend in the past half century.According to the changes in annual runoff and the sediment yield per area.rivers in China can be classified into the following three groups:1)rivers with decreasing annual sediment transport and stable runoff:2)rivers with both decreasing annual sediment transport and runoff and 3)rivers with greatly reduced annual sediment transport and decreasing annual runoff.The results indicate that,in all southern rivers(to the south of the Huaihe River including the Huaihe River),there has been little change in average annual runoff but a dramatic decrease in annual sediment transport.In the northern rivers.however,both the annual sediment yield and the runoff show significant evidence of reduction.To further investigate the recent changes in annual runoff and sediment transport.the short-term observation data from these 10 gauging stations in the recent 10 years have been assessed.Results show that both the annual sediment transport and the runoff have decreased significantly in the northern rivers in the past 10 years.Using the Yellow River at the Lijin Station as an example,the average annual runoff for the last 10 years is only 1/3 of the long term average value and the average annual sediment yield of the last 10 years is only 1/4 of the long term average value.More unusually,in the Yongding River the annual sediment yield has approached zero and the runoff has decreased significantly.In addition,the impacts of human activities on the changes in both runoff and sediment transport have been discussed.

  13. Nearshore sediment thickness, Fire Island, New York

    Locker, Stanley D.; Miselis, Jennifer L.; Buster, Noreen A.; Hapke, Cheryl J.; Wadman, Heidi M.; McNinch, Jesse E.; Forde, Arnell S.; Stalk, Chelsea A.


    Investigations of coastal change at Fire Island, New York (N.Y.), sought to characterize sediment budgets and determine geologic framework controls on coastal processes. Nearshore sediment thickness is critical for assessing coastal system sediment availability, but it is largely unquantified due to the difficulty of conducting geological or geophysical surveys across the nearshore. This study used an amphibious vessel to acquire chirp subbottom profiles. These profiles were used to characterize nearshore geology and provide an assessment of nearshore sediment volume. Two resulting sediment-thickness maps are provided: total Holocene sediment thickness and the thickness of the active shoreface. The Holocene sediment section represents deposition above the maximum flooding surface that is related to the most recent marine transgression. The active shoreface section is the uppermost Holocene sediment, which is interpreted to represent the portion of the shoreface thought to contribute to present and future coastal behavior. The sediment distribution patterns correspond to previously defined zones of erosion, accretion, and stability along the island, demonstrating the importance of sediment availability in the coastal response to storms and seasonal variability. The eastern zone has a thin nearshore sediment thickness, except for an ebb-tidal deposit at the wilderness breach caused by Hurricane Sandy. Thicker sediment is found along a central zone that includes shoreface-attached sand ridges, which is consistent with a stable or accretional coastline in this area. The thickest overall Holocene section is found in the western zone of the study, where a thicker lower section of Holocene sediment appears related to the westward migration of Fire Island Inlet over several hundred years.

  14. Sediment supply versus local hydraulic controls on sediment transport and storage in a river with large sediment loads

    Dean, David; Topping, David; Schmidt, John C.; Griffiths, Ronald; Sabol, Thomas


    The Rio Grande in the Big Bend region of Texas, USA, and Chihuahua and Coahuila, Mexico, undergoes rapid geomorphic changes as a result of its large sediment supply and variable hydrology; thus, it is a useful natural laboratory to investigate the relative importance of flow strength and sediment supply in controlling alluvial channel change. We analyzed a suite of sediment transport and geomorphic data to determine the cumulative influence of different flood types on changing channel form. In this study, physically based analyses suggest that channel change in the Rio Grande is controlled by both changes in flow strength and sediment supply over different spatial and temporal scales. Channel narrowing is primarily caused by substantial deposition of sediment supplied to the Rio Grande during tributary-sourced flash floods. Tributary floods have large suspended-sediment concentrations, occur for short durations, and attenuate rapidly downstream in the Rio Grande, depositing much of their sediment in downstream reaches. Long-duration floods on the mainstem have the capacity to enlarge the Rio Grande, and these floods, released from upstream dams, can either erode or deposit sediment in the Rio Grande depending upon the antecedent in-channel sediment supply and the magnitude and duration of the flood. Geomorphic and sediment transport analyses show that the locations and rates of sand erosion and deposition during long-duration floods are most strongly controlled by spatial changes in flow strength, largely through changes in channel slope. However, spatial differences in the in-channel sediment supply regulate sediment evacuation or accumulation over time in long reaches (greater than a kilometer).

  15. Suspended sediment and sediment-associated contaminants in San Francisco Bay

    Schoellhamer, D.H.; Mumley, T.E.; Leatherbarrow, J.E.


    Water-quality managers desire information on the temporal and spatial variability of contaminant concentrations and the magnitudes of watershed and bed-sediment loads in San Francisco Bay. To help provide this information, the Regional Monitoring Program for Trace Substances in the San Francisco Estuary (RMP) takes advantage of the association of many contaminants with sediment particles by continuously measuring suspended-sediment concentration (SSC), which is an accurate, less costly, and more easily measured surrogate for several trace metals and organic contaminants. Continuous time series of SSC are collected at several sites in the Bay. Although semidiurnal and diurnal tidal fluctuations are present, most of the variability of SSC occurs at fortnightly, monthly, and semiannual tidal time scales. A seasonal cycle of sediment inflow, wind-wave resuspension, and winnowing of fine sediment also is observed. SSC and, thus, sediment-associated contaminants tend to be greater in shallower water, at the landward ends of the Bay, and in several localized estuarine turbidity maxima. Although understanding of sediment transport has improved in the first 10 years of the RMP, determining a simple mass budget of sediment or associated contaminants is confounded by uncertainties regarding sediment flux at boundaries, change in bed-sediment storage, and appropriate modeling techniques. Nevertheless, management of sediment-associated contaminants has improved greatly. Better understanding of sediment and sediment-associated contaminants in the Bay is of great interest to evaluate the value of control actions taken and the need for additional controls. ?? 2007 Elsevier Inc. All rights reserved.

  16. Sediment Diagenesis and Benthic Flux

    Emerson, S.; Hedges, J.


    Chemical reactions in marine sediments and the resulting fluxes across the sediment-water interface influence the global carbon cycle and the pH of the sea and affect the abundance of CaCO3 and opal-forming plankton in the ocean. On very long timescales these diagenetic reactions control carbon burial in sedimentary rocks and the oxygen content of the atmosphere. Sedimentary deposits that remain after diagenesis are the geochemical artifacts used for interpreting past changes in ocean circulation, biogeochemical cycles, and climate. This chapter is about the processes of diagenesis and burial of the chemical elements that make up the bulk of the particulate matter that reaches the seafloor (organic matter, CaCO3, SiO2, Fe, Mn, and aluminosilicates).Understanding of sediment diagenesis and benthic fluxes has evolved with advances in both experimental methods and modeling. Measurements of chemical concentrations in sediments, their associated pore waters and fluxes at the sediment-water interface have been used to identify the most important reactions. Because transport in pore waters is usually by molecular diffusion, this medium is conducive to interpretation by models of heterogeneous chemical equilibrium and kinetics. Large chemical changes and manageable transport mechanisms have led to elegant models of sediment diagenesis and great advances in understanding of diagenetic processes.We shall see, though, that the environment does not yield totally to simple models of chemical equilibrium and chemical kinetics, and laboratory determined constants often cannot explain the field observations. For example, organic matter degradation rate constants determined from modeling are so variable that there are essentially no constraints on these values from laboratory experiments. In addition, reaction rates of CaCO3 and opal dissolution determined from modeling pore waters usually cannot be reproduced in laboratory experiments of these reactions. The inability to

  17. Continental margin sedimentation: from sediment transport to sequence stratigraphy

    Nittrouer, Charles A.; Austin, James A.; Field, Michael E.; Kravitz, Joseph H.; Syvitski, James P.M.; Wiberg, Patricia L.; Nittrouer, Charles A.; Austin, James A.; Field, Michael E.; Kravitz, Joseph H.; Syvitski, James P. M.; Wiberg, Patricia L.


    This volume on continental margin sedimentation brings together an expert editorial and contributor team to create a state-of-the-art resource. Taking a global perspective, the book spans a range of timescales and content, ranging from how oceans transport particles, to how thick rock sequences are formed on continental margins. - Summarizes and integrates our understanding of sedimentary processes and strata associated with fluvial dispersal systems on continental shelves and slopes - Explores timescales ranging from particle transport at one extreme, to deep burial at the other - Insights are presented for margins in general, and with focus on a tectonically active margin (northern California) and a passive margin (New Jersey), enabling detailed examination of the intricate relationships between a wide suite of sedimentary processes and their preserved stratigraphy - Includes observational studies which document the processes and strata found on particular margins, in addition to numerical models and laboratory experimentation, which provide a quantitative basis for extrapolation in time and space of insights about continental-margin sedimentation - Provides a research resource for scientists studying modern and ancient margins, and an educational text for advanced students in sedimentology and stratigraphy

  18. Sediment Budget Analysis; Masonboro Inlet, North Carolina


    littoral sediments or sediments derived principally from the beaches, consisting of generally sandy material. Other sediments consisting of fine-grain...propagate only from the seaward boundary toward shore . It includes features such as wave generation, wave reflection, and bottom frictional dissipation...analysis. The regional shore line adopted in the study is oriented at 36.17o clockwise from north, as shown in Figure 8. Statistics were performed for

  19. Sediment as a Problem in Fame Storage

    Głąb Jadwiga


    Full Text Available This article characterizes circumstances associated with the formation of sediment in FAME and factors intensifying this process. It describes the formation of sediment due to oxidation of FAME and the precipitation of sediment in low temperatures of storage which relates to the raw material nature and incomplete production process of FAME. It indicates more causes of sediment’s formation originating from the incompatibility of construction materials used in logistics and microbiological contamination.

  20. Sediment Movement in Periodic Alternating Current

    CAO Zude; KONG Lingshuang; LIU Defu


    The present paper summarizes the results of previous studies, including the structure and principle of the rotaryring flume for researching the fine sediment movement, the mechanism of the flume, method of eliminating the influence ofthe centrifugal force and sediment movement experiments with periodic alternating current. Also included are the experi-ment-based relationship among sediment concentration, bed shear stress and silt carrying capacity, a proposed erosion-depo-sition function and bed erosion-deposition calculation together with the results of verification.

  1. Analysis of sedimentation of canals

    Agunwamba, J.C.,


    Full Text Available The dredged canals in the Niger Delta coastal flood plain are being threatened by siltation. This study is limited to those canals in Rivers State of Nigeria, which are under the influence of tidal waves. A total of eight canals were considered with four each from Ekulama and Cawthorne Channel. Different approaches were used to carry out this study, which includes field reconnaissance survey, hydrographic survey, soil sample analysis and collection of all available data and information. The typical bed materials size (D50 is approximately 0.01mm; which gives a settling velocity of 0.09mm/sec using stroke’s law. Hydrographic survey of the canals from 1992 to 1996 revealed an average siltation rate of 2.35m/yr. A regression equation was also derived which relates the cost of dredging to canal area, rate of siltation and average aggregation. A plot of canal centre profile; entrance, middle and end cross sections showing sediment distribution along the canal profile, shows that majority of the particles that form the sediment enter the canal from the rivers. The sedimentation is caused by the reduction in water current, which has average value of 0.0145m/sec. The bathyorographical check on the canals revealed that the sum of the two exterior angles of the canal with the river at the point of connection has to lie within 1800 + 50 for an effective flow that will minimize settlement of particles. In addition, the canals should be constructed to start and terminate on a moving water body, to avoid dead ends. A regression equation was determined which relates the cost of dredging to canal area, rate of siltation and average aggradations.


    George GERGOV; Tzviatka KARAGIOZOVA


    The currently enforced Bulgarian water legislation [the Water Act (1999),the Environmental Protection Act (2002),etc.] requires conducting special studies for accurate assessments of sand and gravel flux along the rivers,prior to the issue of the license for operation of the quarries,where they will be dredged. The activity of a quarry necessitates special investigations because of the large dimensions of the damages inflicted on the environment. Ours studies have shown that there are two types of river reaches,in which abstracion of sand and gravel is performed. The first one refers usually to the plain area river reaches. The other type is mountainous with high rate of sediment load,which consists of coarse solid matter. The "on-the-spot" study on the environmental impact of the sand and gravel dredging has revealed that in the area of the quarry the riverbed cuts into the alluvial sediments to about 6-7 m and this ditch has spread by attenuation at a distance of more than 25 km upstream. Downstream the pit the picture is replicated and at the 8th km a local scour on the riverbed,amounting to more than 1.80 - 2.00 m,has been measured near the foundation of a massive bridge in the centre of city of Plovdiv. Such assessments of dynamic resources of sand and gravel materials are expected to serve for the purposes of gradual limitation of this activity in river sections close to renewable resources. The amount of sediment load,which may be abstracted in the area of the Orizare quarry in Bulgaria on a yearly basis has been calculated as 6000 m3/a. It ensures that the resources will not be exhausted and irreversible distortion of the riverbed will be prevented. This is an environmentally safe limit.

  3. Sedimentation

    Rixen, T.; Guptha, M.V.S.; Ittekkot, V.

    by a factor two in Arabian Sea. The organic carbon burial rates in Arabian Sea related to primary production and carbonate accumulation reveal an acceptable agreement on a global scale except at sea floor spreading zones and continental margins....

  4. Urine sediment from a Chihuahua.

    Pallatto, Valarie; Wood, Michael; Grindem, Carol


    A 6-year-old, intact male Chihuahua was presented with stranguria and painful urination of 5 days duration. Cystine crystals were observed in low numbers in unstained urine sediment preparations, and a diagnosis of cystinuria was made. Uroliths were removed surgically from the urethra and the bladder, and mineral analysis indicated the stones were composed of 100% cystine. Cystinuria results from an inherited defect in renal tubular transport of cystine that affects many breeds and has been found as an autosomal recessive trait in Newfoundlands. Accurate identification of cystine crystals in urine is an important means of diagnosing cystinuria.

  5. Release of metals from anoxic sediment

    Larsen, Martin Mørk; Jacobsen, Gitte

    The Bornholm Deep is anoxic every summer, and samples were collected in the fall 2012 and stored dark and cold (4°C in climate room), degassing regularly with Ar(g) to keep the overlying water column anoxic. Nine sediments columns were selected and divided into three groups, (1) where the water w...... without crabs, but cloudy, indicating re-suspension in the group with crabs. The metal release from sediments will be discussed in the context of re-oxygenation of anoxic or low-oxic sediments and the effect of organism that digs into the sediment in recently re-oxidised bottom waters....

  6. Sediment Sources in the Persian Gulf

    Mahoutian, Mehrab


    Sediment Constituent Analysis is an effective tool for identifying sediment sources. Based on several sediment samples taken from different sites all over the Iranian coastlines, we have been able to show that an important portion of sediment on the beaches in the Persian Gulf is bio-clastic; that is, biologically created from the coral environment as well as other marine habitats. Unlike mineral (clastic) sediments, carbonate sediments are born not made. Furthermore, carbonate sand constituents are generally less durable than their quartz and mineral counterparts, and break down relatively quickly. Therefore, destruction of reefs and degradation of marine habitat are certain to reduce the sand supply to the shoreline in the Persian Gulf that is necessary to maintain beaches. Carbonate sands are also found on the coastline of the Oman Sea. One of the striking things about the sediments along the coastline of Iran is the high percentage of carbonate material. Molluscan debris is common, even ubiquitous. This reflects the populations living in the offshore waters. Some molluscs thrive in high-energy sandy environments, others like finer sediments. Some live at the surface, while some burrow down as much as a half-metre. A great deal of information can be gained from the study of the species of mollusk and their distribution in the sediments. This paper introduces a few case studies done in different parts of the Persian Gulf by using this method as a general assessment toolbox.



    In this paper, with the starting velocity experiments of natural cohesive sedimentation, the author proposes an assumption concerning the starting mechanism of cohesive sedimentation and gives a formula to determine the starting velocity of compact clay. It is pointed out that the fluctuating function of flow is a main factor for the starting of sedimentation. And the component and the structure of cohesive sedimentation are also the affecting factors for the starting. Consequently, the study shows that modern results of soil mechanics, clay mineralogy and fluid mechanics are helpful in the investigation of this kind of engineering problem.

  8. Arsenic mobility in contaminated lake sediments

    Nikolaidis, Nikolaos P.; Dobbs, Gregory M.; Chen, Jing; Lackovic, Jeffrey


    An arsenic contaminated lake sediment near a landfill in Maine was used to characterize the geochemistry of arsenic and assess the influence of environmental conditions on its mobility. A kinetic model was developed to simulate the leaching ability of arsenic in lake sediments under different environmental conditions. The HM1D chemical transport model was used to model the column experiments and determine the rates of arsenic mobility from the sediment. Laboratory studies provided the information to construct a conceptual model to demonstrate the mobility of arsenic in the lake sediment. The leaching ability of arsenic in lake sediments greatly depends on the flow conditions of ground water and the geochemistry of the sediments. Large amounts of arsenic were tightly bound to the sediments. The amount of arsenic leaching out of the sediment to the water column was substantially decreased due to iron/arsenic co-precipitation at the water-sediment interface. Overall, it was found that arsenic greatly accumulated at the ground water/lake interface and it formed insoluble precipitates. - Arsenic accumulates at the ground water/lake interface, where it forms insoluble precipitates.

  9. Upstream sediment input effects on experimental dune trough scour in sediment mixtures

    Kleinhans, M. G.


    Understanding causes of dune irregularity, especially dune trough scour, is important for the modeling of vertical sorting of sediment mixtures in morphological models of rivers with sediment mixtures. Sediment in dunes is generally sorted in a fining-upward manner, which affects the sediment transport composition depending on the scour depth distribution of the dunes. Why dunes become more irregular and develop deep scour holes in some conditions is only partially understood. Moreover, there...

  10. Seasonal variations in pore water and sediment geochemistry of littoral lake sediments (Asylum Lake, MI, USA)

    Miller Douglas; Haas Johnson R; Koretsky Carla M; Ndenga Noah T


    Abstract Background Seasonal changes in pore water and sediment redox geochemistry have been observed in many near-surface sediments. Such changes have the potential to strongly influence trace metal distribution and thus create seasonal fluctuations in metal mobility and bioavailability. Results Seasonal trends in pore water and sediment geochemistry are assessed in the upper 50 cm of littoral kettle lake sediments. Pore waters are always redox stratified, with the least compressed redox str...

  11. Cross-shore suspended sediment transport in the surf zone: A fieldbased parameterization

    Aagaard, Troels; Black, Kerry; Greenwood, Brian


    sediment transport, sediment concentrations, incident waves, undertow, morphodynamics, beach processes......sediment transport, sediment concentrations, incident waves, undertow, morphodynamics, beach processes...

  12. [Limnology of high mountain tropical lake, in Ecuador: characteristics of sediments and rate of sedimentation].

    Gunkel, Günter


    Equatorial high mountain lakes are a special type of lake occurring mainly in the South American Andes as well as in Central Africa and Asia. They occur at altitudes of a few thousand meters above sea level and are cold-water lakes (limnological study was therefore undertaken at Lake San Pablo, Ecuador, to analyze the basic limnological processes of the lake, which has a tendency for eutrophication. Sediment quality of San Pablo Lake is given under consideration of horizontal and vertical distribution using sediment cores. Significance of sediments for eutrophication process of lakes is demonstrated using phosphorus concentration of sediments as well as the phosphorus retention capacity of the sediments by ratio Fe/P. Dating of the sediments is done using 137Cs and 210Pb, but the activity of 137Cs in the sediment was very low nearly at the detection level. Sedimentation rate is determined to be 3.5 mm/year and the sediment cores represent about 110 years. P concentration of the sediments is high (approximately 5 g/kg dry substance), and P retention capacity by Fe is insufficient (Fe/P = 4). The sediment quality did not change significantly during the past decades, and the trophic state of San Pablo Lake was already less or more eutrophic 110 years ago. The contamination of the lake sediments by heavy metals is insignificant.

  13. Holocene sediment budgets of the Rhine Delta (The Netherlands): a record of changing sediment delivery

    Erkens, Gijsbert; Cohen, K.M.; Gouw, M.J.P.; Middelkoop, H.; Hoek, W.Z.


    Holocene sedimentation in the Rhine-Meuse Delta is facilitated by sea-level rise and tectonics, but most important is the result of the sediment flux received through rivers from the hinterland. The majority of Rhine and Meuse sediment entering the delta was trapped between the apex and


    Leo C.VAN RIJN


    This keynote lecture addresses engineering sedimentation problems in estuarine and coastal environments and practical solutions of these problems based on the results of field measurements,laboratory scale models and numerical models. The three most basic design rules are: (1) try to understand the physical system based on available field data; perform new field measurements if the existing field data set is not sufficient (do not reduce on the budget for field measurements); (2) try to estimate the morphological effects of engineering works based on simple methods (rules of thumb,simplified models,analogy models,i.e. comparison with similar cases elsewhere); and (3) use detailed models for fine-tuning and determination of uncertainties (sensitivity study trying to find the most influencial parameters). Engineering works should be designed in such a way that side effects (sand trapping,sand starvation,downdrift erosion) are minimum. Furthermore,engineering works should be designed and constructed or built in harmony rather than in conflict with nature. This 'building with nature' approach requires a profound understanding of the sediment transport processes in morphological systems.


    Baosheng WU; Albert MOLINAS; Anping SHU


    A new method based on the Transport Capacity Fraction (TCF) concept is proposed to compute the fractional transport rates for nonuniform sediment mixtures in sand-bed channels. The TCF concept is derived from the understanding that the measurements and predictions of bed-material load are more accurate and reliable than the measurements and predictions of fractional loads. First the bed-material load is computed using an appropriate equation, then the fractional transport rates are determined by distributing the bed-material load into size groups through a transport capacity distribution function. For the computation of bed-material loads, the Aekers and White, Engelund and Hansen, and Yang equations are used in this study. Two new transport capacity distribution functions are developed for flows in sand-bed channels. The new expressions presented in this paper account for the sheltering and exposure effects that exist in mixtures. Comparisons with measured data show that the proposed method can significantly improve the predictions of fractional transport rates for nonuniform sediment mixtures.

  16. Microcystin elimination during sediment contact.

    Grützmacher, Gesche; Wessel, Gabriele; Klitzke, Sondra; Chorus, Ingrid


    Microcystins (MCYSTs) are a group of structurally similar toxic peptides produced by cyanobacteria ("blue-green algae") which occur frequently in surface waters worldwide. Reliable elimination is necessary when using these waters as drinking water sources. Bank filtration and artificial groundwater recharge utilize adsorption and degradation processes in the subsurface, commonly through sand and gravel aquifers, for the elimination of a wide range of substances during drinking water (pre-) treatment. To obtain parameters for estimating whether MCYST breakthrough is likely in field settings, we tested MCYST elimination in laboratory experiments (batch experiments, column experiments) under a range of conditions. Adsorption coefficients (k(d)-values) obtained from batch studies ranged from 0.2 mL/g for filter sand to 11.6 mL/g for fine grained aquifer materials with 2% fine grains (<63 microm) and 0.8% organic matter. First order degradation rates in column studies reached 1.87 d(-1) under aerobic conditions and showed high variations under anoxic conditions (<0.01-1.35 d(-1)). These results show that, next to sediment texture, redox conditions play an important role for MCYST elimination during sediment passage. Biodegradation was identified as the dominating process for MCYST elimination in sandy aquifer material.

  17. Influence of wave and current flow on sediment-carrying capacity and sediment flux at the water-sediment interface.

    Zheng, Jun; Li, Ruijie; Yu, Yonghai; Suo, Anning


    In nearshore waters, spatial and temporal scales of waves, tidal currents, and circulation patterns vary greatly. It is, therefore, difficult to combine these factors' effects when trying to predict sediment transport processes. This paper proposes the concept of significant wave velocity, which combines the effects of waves, tides, and ocean currents using the horizontal kinetic energy superposition principle. Through a comparison of the relationship between shear stress at the water-sediment interface and sediment-carrying capacity, assuming equilibrium sediment flux, a new formula for sediment-carrying capacity, which incorporates the concept of significant wave velocities, is derived. Sediment-carrying capacity is a function of the critical velocity, which increases with water depth and decreases with increasing relative roughness of the sea bed. Finally, data from field observation stations and simulations are used to test the proposed formula. The results show that the new formula is in good agreement with both field and simulation data. This new formula for sediment-carrying capacity can be used to simulate nearshore sediment transport.

  18. Modern sedimentation and sediment dispersal pattern off southwestern Taiwan

    Hsu, Sheng-Ting; Su, Chih-Chieh; Tsai, Po-Hsuan; Cheng, Yiya


    Taiwan is located at the collision zone between the Eurasian and Philippine Sea Plates and also on the Western North Pacific corridor of typhoons. Every year, three to four typhoons will invaded Taiwan and brought heavy rainfall. The active tectonic setting and climatic conditions create the extremely high sediment yield and export to the ocean. Our study area is located offshore southwestern Taiwan which is mainly composed of a narrow Gaoping Shelf and broad Gaoping Slope. Four major submarine canyons, the Shoshan Submarine Canyon, Kaohsiung Submarine Canyon, Gaoping Submarine Canyon, and Fangliao Submarine Canyon, extended into deep sea, through Penghu Submarine Canyon and subsequently merged into north terminus of Manila Trench. Over 50 box and gravity cores were collected by using R/V Ocean Research 1, 3 and 5 from 2005 to 2014. The cores were split and conducted core description and surface photographs at the Core Laboratory of the Taiwan Ocean Research Institute (TORI). The following analyses, including X-radiography, bulk density, particle size, Pb-210 chronology, were accomplished at the Marine Radioactivity and Sedimentology Lab at the Institute of Oceanography, National Taiwan University. The grain size analysis result shows a finer trend from coastal to deep water , except for the lower Fangliao basin which the grain size is larger than the expected value. According to the previous studies on the Pingtung Earthquake induced submarine geohazard, the Fangliao Submarine Canyon and the Lower Fangliao Basin is an important conduit for gravity flow which triggered large scale submarine cable breakages and left coarse sediments on the passage. By using the excess Pb-210 derived sediment accumulation rates, Huh et al. (2009) suggested the depocenter off the southwestern Taiwan is located at the flank of the Gaoping Canyon over the upper slope with the highest rate >1 cm/yr. In this study we integrate the Pb-210 inventory data which covered the area from the

  19. Suspended sediment yield in Texas watersheds

    Coonrod, Julia Ellen Allred

    The Texas Water Development Board collected suspended sediment samples across the state of Texas for approximately 60 years. Until this research, no comprehensive analysis of the data had been conducted. This study compiles the suspended sediment data along with corresponding streamflow and rainfall. GIS programs are developed which characterize watersheds corresponding to the sediment gauging stations. The watersheds are characterized according to topography, climate, soils, and land use. All of the data is combined to form several SAS data sets which can subsequently be analyzed using regression. Annual data for all of the stations across the state are classified temporally and spatially to determine trends in the sediment yield. In general, the suspended sediment load increases with increasing runoff but no correlation exists with rainfall. However, the annual average rainfall can be used to classify the watersheds according to climate, which improves the correlation between sediment load and runoff. The watersheds with no dams have higher sediment loads than watersheds with dams. Dams in the drier parts of Texas reduce the sediment load more than dams in the wetter part of the state. Sediment rating curves are developed separately for each basin in Texas. All but one of the curves fall into a band which varies by about two orders of magnitude. The study analyzes daily time series data for the Lavaca River near Edna station. USGS data are used to improve the sediment rating curve by the addition of physically related variables and interaction terms. The model can explain an additional 41% of the variability in sediment concentration compared to a simple bivariate regression of sediment load and flow. The TWDB daily data for the Lavaca River near Edna station are used to quantify temporal trends. There is a high correlation between sediment load and flowrate for the Lavaca River. The correlation can be improved by considering a flow-squared term and by

  20. Accounting for Long Term Sediment Storage in a Watershed Scale Numerical Model for Suspended Sediment Routing

    Keeler, J. J.; Pizzuto, J. E.; Skalak, K.; Karwan, D. L.; Benthem, A.; Ackerman, T. R.


    Quantifying the delivery of suspended sediment from upland sources to downstream receiving waters is important for watershed management, but current routing models fail to accurately represent lag times in delivery resulting from sediment storage. In this study, we route suspended sediment tagged by a characteristic tracer using a 1-dimensional model that implicitly includes storage and remobilization processes and timescales. From an input location where tagged sediment is added, the model advects suspended sediment downstream at the velocity of the stream (adjusted for the intermittency of transport events). Deposition rates are specified by the fraction of the suspended load stored per kilometer of downstream transport (presumably available from a sediment budget). Tagged sediment leaving storage is evaluated from a convolution equation based on the probability distribution function (pdf) of sediment storage waiting times; this approach avoids the difficulty of accurately representing complex processes of sediment remobilization from floodplain and other deposits. To illustrate the role of storage on sediment delivery, we compare exponential and bounded power-law waiting time pdfs with identical means of 94 years. In both cases, the median travel time for sediment to reach the depocenter in fluvial systems less than 40km long is governed by in-channel transport and is unaffected by sediment storage. As the channel length increases, however, the median sediment travel time reflects storage rather than in-channel transport; travel times do not vary significantly between the two different waiting time functions. At distances of 50, 100, and 200 km, the median travel time for suspended sediment is 36, 136, and 325 years, orders of magnitude slower than travel times associated with in-channel transport. These computations demonstrate that storage can be neglected for short rivers, but for longer systems, storage controls the delivery of suspended sediment.

  1. Quantifying sediment connectivity in Wadi Al-Arab (NW Jordan) using a sediment budget approach

    Kraushaar, Sabine; Pöppl, Ronald


    Due to data scarcity, sediment connectivity most often only qualitatively describes the potential transfer of sediments through a landscape. However, quantitative information on sediment delivery is of special relevance for modelling approaches as well as for sustainable land and water management, especially in water scarce regions such as Jordan, where valuable water reservoirs suffer from sediment pollution. Measurements are needed to quantify sediment outputs of the different land units and to trace their pathways though the catchments. This study uses the outcomes of a multiple response sediment budget approach conducted in the Wadi al-Arab catchment in northwest Jordan (263.5 km²) to quantify sediment connectivity. The catchment shows a Mediterranean to semi arid climate and consists of carbonatic and marly geology of the Upper Cretaceous. The topography ranges from rolling hills in the East to steeper mountainous areas in the North and West were olive orchards are the main agricultural use. Soil erosion measurements in the main land use units and relevant sediment sources, such as olive orchards, agricultural fields, and natural vegetated slopes uncovered the potential ranges of soil erosion rates in these units. Furthermore, the annual sediment yield in the Wadi Al Arab water reservoir was calculated. With the extrapolation of the erosion rates of the main contributing land use units and the annual sediment amount that reaches the sink, a maximum value of lateral sediment connectivity could be quantified, reaching up to 18%. A multiple sediment fingerprint method was used to delineate the relative contribution of each measured source to the sink based on the lake sediment samples. Supported by additional 137Cs analysis of terrace samples and a survey of the Wadi bed a high longitudinal connectivity could be derived. The applied method mix allowed the quantification of lateral sediment connectivity on catchment scale and gave a comprehensive understanding of

  2. Sediment transport capacity of hyperconcentrated flow


    As one of the most important components of river mechanics,sediment transport capacity of sediment-laden flows has attracted much attention from many researchers working on river mechanics and hydraulic engineering. Based on the time-averaged equation for a turbulent energy equilibrium in solid and liquid two-phase flow,an expression for the efficiency coefficient of suspended load movement was derived for the two-dimensional,steady,uniform,fully-developed turbulent flow. A new structural expression of sediment transport capacity was achieved. Using 115 runs of flume experimental data,which were obtained through two kinds of sediment transport experiments in the state of equilibrium,in combination with the basic rheological and sediment transporting characteristics of hyperconcentrated flow,the main parameters in the structural expression of sediment transport capacity were calibrated,and a new formula of sediment transport capacity for hyperconcentrated flow was developed. A large amount of field data from the Yellow River,Wuding River,and Yangtze River,etc. were adopted to verify the new formula and good agreement was obtained. These results above contribute to an improved theoretical system of river mechanics and a reliable tool for management of rivers carrying high concentration of sediments.

  3. On luminescence bleaching of tidal channel sediments

    Fruergaard, Mikkel; Pejrup, Morten; Murray, Andrew S.


    We investigate the processes responsible for bleaching of the quartz OSL signal from tidal channel sediment. Tidal dynamics are expected to play an important role for complete bleaching of tidal sediments. However, no studies have examined the amount of reworking occurring in tidal channels and o...

  4. Mercury-contaminated sediments affect amphipod feeding.

    Bundschuh, Mirco; Zubrod, Jochen P; Seitz, Frank; Newman, Michael C; Schulz, Ralf


    A 125-mile reach of the South River, Virginia, was contaminated with mercury during the first half of the 20th century. As increased concentrations of mercury have persisted, researchers have carefully studied its distribution in the river biota and estimated associated risks. The present study evaluated the influence of mercury on feeding rate and uptake by the amphipod Hyalella azteca. The test organisms were exposed for 7 days with leaf discs to reference and contaminated field sediment during the preliminary experiment and additionally to Sedimite (a commercial mercury-sequestering agent) amended sediments during the final experiment. The preliminary experiment demonstrated a decreased feeding rate (approximately 35%) of H. azteca in sediment from a contaminated site relative to sediment from a reference site. The test design of the final experiment took advantage of the knowledge gained in the preliminary experiment by increasing the number of replicates, which decreased the type II error rate. First, the results of the final experiment confirmed the results of the preliminary experiment by again demonstrating differences in the feeding rate of approximately 35% between reference and contaminated sediment. Second, the results indicated a lower feeding rate in reference sediment in the presence of Sedimite. Third, an opposite tendency, although not significant, was apparent for Sedimite-amended contaminated sediment. Thus, Sedimite appears to decrease sediment quality, whereas this conclusion is based on the feeding rate of H. azteca. However, Sedimite and its value as a mercury-sequestering agent requires further evaluation.


    SHEN Zhigang


    The hydrodynamic and the sediment transport patterns within the estuary of the Yangtze River are complex because of interaction of fluvial and the tidal forces, depending on freshwater discharge and tidal range. Based on the data measured in recent years, this paper discusses the characteristics of flow and sediment movement in the Yangtze River Estuary and their influences on the evolution of the estuary.

  6. Sediment transport capacity of hyperconcentrated flow

    SHU AnPing; FEI XiangJun


    As one of the most important components of river mechanics, sediment transport capacity of sediment-laden flows has attracted much attention from many re-searchers working on river mechanics and hydraulic engineering. Based on the time-averaged equation for a turbulent energy equilibrium in solid and liquid two-phase flow, an expression for the efficiency coefficient of suspended load movement was derived for the two-dimensional, steady, uniform, fully-developed turbulent flow. A new structural expression of sediment transport capacity was achieved. Using 115 runs of flume experimental data, which were obtained through two kinds of sediment transport experiments in the state of equilibrium, in combi-nation with the basic rheological and sediment transporting characteristics of hy-perconcentrated flow, the main parameters in the structural expression of sediment transport capacity were calibrated, and a new formula of sediment transport ca-pacity for hyperconcentrated flow was developed. A large amount of field data from the Yellow River, Wuding River, and Yangtze River, etc. were adopted to verify the new formula and good agreement was obtained. These results above contribute to an improved theoretical system of river mechanics and a reliable tool for man-agement of rivers carrying high concentration of sediments.

  7. Bioavailability of Metals in Contaminated Sediments

    Paller M. H.


    Full Text Available Bioavailability controls the transfer of metals from sediments to ecological receptors and humans. It can rarely be predicted from total metal concentrations because it is affected by metal geochemistry in sediments as well as the biochemistry, physiology, and behavior of benthic organisms. There is no single approach for including bioavailability in risk assessments because of variability in site specific conditions and the difficulty of validating methods. Acid-volatile sulfide and simultaneously extracted metals are useful in predicting bioavailability in anoxic sediments containing sulfides that react to form insoluble metal complexes. This method can be improved by adjusting for organic carbon and other ligands that also bind free metals. Site-specific desorption Kd values calculated by sequential extraction methods can be useful in predicting bioavailable metal fractions in oxic and anoxic sediments. A modified desorption distribution coefficient (Kdg can be calculated by extraction with the digestive gut fluids of sediment feeding organisms to account for the effects of ingestion on metal release from sediments. Recently developed in situ measurement technologies can accumulate dissolved metals in a controlled fashion that may correspond with bioavailable metal fractions in sediment. Successful evaluation of bioavailability requires the selection of methods suitable for the organisms and sediment environments under consideration. A weight-of-evidence approach that incorporates multiple lines of evidence can help address uncertainties and increase the likelihood of incorporating bioavailability into remedial decisions.

  8. Luminescence dating of storm-surge sediment

    Cunningham, A.C.


    Geological evidence of storm surges has the potential to provide vital information on storm-surge risk. Sediment from the coastal dunes of the Netherlands contains evidence of extreme floods that occurred before reliable measurements of water level began. For these sediments to be useful in flood-ri

  9. Design of a marine sediment trap and accessories

    Janakiraman, G.; Fernando, V.; Venkatesan, R.; Rajaraman, V.S.

    The marine sediment trap and the mooring accessories were developed indigenously and were used successfully for the collection of settling sediments in the Arabian Sea The experience gained in using sediment trap and further improvements...

  10. Sediment Discharges from Ghanaian Rivers into the Sea | Akrasi ...

    Information on sediment yield of a river basin is an important requirement for water ... measurements of suspended sediment transport for 21 monitoring stations in ... predictive models for suspended sediment yields of catchments for which no ...

  11. Analysis of Sedimentation in Wonogiri Reservoir

    Tri Joko Inti Budi Santosa


    Full Text Available The Wonogiri reservoir which has 730 million cubic meters of total storage, 90 square kilometers of water area, and 1260 square kilometers of catchment area, is located in the Wonogiri Regency, Central Java Province. It was first established in 1981 and began its operation in 1982 with the expectation that it would last for about 100 years. Today (2002 the reservoir has got a serious problem of sedimentation. The sedimentation is so large that it would decrease the capacity storage of the reservoir and would shorten the length of operation. Therefore, it is necessary to predict the sediment that comes into the reservoir. This research would be based on the total sediment calculation of the sedimentation, through some methods, such as echo sounding measured data, land erosion (USLE, the calculation of the sediment in rivers. This research calculates the sediment capacities based on the water flow data and the sediment rating curves in rivers of Keduang, Tirtomoyo, Temon, upstream reach of Bengawan Solo, Alang, and Wuryantoro. The suspended load was calculated based on the sediment rating curves, whereas the bed load was computed as the percentage of the suspended load. The sum of both calculation results would be the total sediment. The calculation result showed that the total sediment which has come into the reservoir is 6.68 million cubic meters per year. As a comparison, the writer noted that the former researcher using echo sounding method done by the Faculty of Geography of the Universitas Gadjah Mada in 1985, it found that the total sediment capacity which came into the reservoir was 6.60 million cubic meters per year or 5.40 mm per year of sheet erosion. The other research using echo sounding method done by JICA in 2000 found that the total sediment which had come into the reservoir was 4.50 million cubic meters per year or 3.50 mm per year of sheet erosion. By knowing the results of calculation of the total sediment, we can learn that

  12. Sediment chemoautotrophy in the coastal ocean

    Vasquez-Cardenas, Diana; Meysman, Filip J. R.; van Breugel, Peter; Boschker, Henricus T. S.


    A key process in the biogeochemistry of coastal sediments is the reoxidation of reduced intermediates formed during anaerobic mineralization which in part is performed by chemoautotrophic micro-organisms. These microbes fix inorganic carbon using the energy derived from reoxidation reactions and in doing so can fix up to 32% of the CO2 released by mineralization. However the importance and distribution of chemoautotrophy has not been systematically investigated in these environments. To address these issues we surveyed nine coastal sediments by means of bacterial biomarker analysis (phospholipid derived fatty acids) combined with stable isotope probing (13C-bicarbonate) which resulted in an almost doubling of the number of observations on coastal sedimentary chemoautotrophy. Firstly, sediment chemoautotrophy rates from this study and rates compiled from literature (0.07 to 36 mmol C m-2 d-1) showed a power-law relation with benthic oxygen uptake (3.4 to 192 mmol O2 m-2 d-1). Benthic oxygen uptake was used as a proxy for carbon mineralization to calculate the ratio of the CO2 fixed by chemoautotrophy over the total CO2 released through mineralization. This CO2 efficiency was 3% in continental shelf, 9% in nearshore and 21% in salt marsh sediments. These results suggest that chemoautotrophy plays an important role in C-cycling in reactive intertidal sediments such as salt marshes rather than in the organic-poor, permeable continental shelf sediments. Globally in the coastal ocean our empirical results show that chemoautotrophy contributes ˜0.05 Pg C y-1 which is four times less than previous estimates. Secondly, five coastal sediment regimes were linked to the depth-distribution of chemoautotrophy: 1) permeable sediments dominated by advective porewater transport, 2) bioturbated sediments, and cohesive sediments dominated by diffusive porewater transport characterized by either 3) canonical sulfur oxidation, 4) nitrate-storing Beggiatoa, or 5) electrogenic sulfur

  13. A probabilistic sediment cascade model of sediment transfer in the Illgraben

    Bennett, G. L.; Molnar, P.; McArdell, B. W.; Burlando, P.


    We present a probabilistic sediment cascade model to simulate sediment transfer in a mountain basin (Illgraben, Switzerland) where sediment is produced by hillslope landslides and rockfalls and exported out of the basin by debris flows and floods. The model conceptualizes the fluvial system as a spatially lumped cascade of connected reservoirs representing hillslope and channel storages where sediment goes through cycles of storage and remobilization by surface runoff. The model includes all relevant hydrological processes that lead to runoff formation in an Alpine basin, such as precipitation, snow accumulation, snowmelt, evapotranspiration, and soil water storage. Although the processes of sediment transfer and debris flow generation are described in a simplified manner, the model produces complex sediment discharge behavior which is driven by the availability of sediment and antecedent wetness conditions (system memory) as well as the triggering potential (climatic forcing). The observed probability distribution of debris flow volumes and their seasonality in 2000-2009 are reproduced. The stochasticity of hillslope sediment input is important for reproducing realistic sediment storage variability, although many details of the hillslope landslide triggering procedures are filtered out by the sediment transfer system. The model allows us to explicitly quantify the division into transport and supply-limited sediment discharge events. We show that debris flows may be generated for a wide range of rainfall intensities because of variable antecedent basin wetness and snowmelt contribution to runoff, which helps to understand the limitations of methods based on a single rainfall threshold for debris flow initiation in Alpine basins.

  14. Water-sediment flow models for river reaches sediment related pollution control.

    Sil, Briti Sundar; Choudhury, Parthasarathi


    Hybrid water-sediment flow models for river reaches have been for predicting sediment and sediment related pollutions in water courses. The models are developed by combining sediment rating model and the Muskingum model applicable for a reach. The models incorporate sediment concentration and water discharge variables for a river reach; allow defining downstream sediment rating curve in terms of upstream water discharges. The model is useful in generating sediment concentration graph for a station having no water discharge records. The hybrid models provide forecasting forms that can be used to forecast downstream sediment concentration/water discharges 2kx time unit ahead. The forecasting models are useful for applications in real time namely, in the real time management of sediment related pollution in water courses and in issuing flood warning. Integration of sediment rating model and the Muskingum model increases model parameters and nonlinearity requiring efficient estimation technique for parameter identification. To identify parameters in the hybrid models genetic algorithm (GA) based optimization technique can be used. The new model relies on the Muskingum model, obey continuity requirement and the parameters can be used in the Muskingum model with water discharges to estimate/predict downstream water discharge values. The proposed model formulations are demonstrated for simulating and forecasting sediment concentration and water discharges in the Mississippi River Basin, USA. Model parameters are estimated using non-dominated sorting Genetic Algorithm II (NSGA-II). Model results show satisfactory model performances.

  15. Effects of oil sands sediments on fish

    Parrott, J.; Colavecchia, M.; Hewitt, L.; Sherry, J.; Headley, J. [Environment Canada, Ottawa, ON (Canada); Turcotte, D.; Liber, K. [Saskatchewan Univ., Regina, SK (Canada)


    This paper described a collaborative project organized by Natural Resources Canada (NRCan) Panel of Energy Research and Development (PERD) with researchers from Environment Canada and the University of Saskatchewan. The 4-year study was conducted to assess the toxicity of oil sands sediments and river waters, and reclamation ponds and sediments on laboratory-raised fish. Three sediments from rivers were evaluated for their potential to cause adverse impacts on fathead minnow eggs and larvae for a period of 18 days. The study monitored hatching, larval survival, development, and growth. Naphthenic acids (NA), polycyclic aromatic hydrocarbons (PAHs) and metals were measured in the sediments to determine if the compounds can be correlated with observed toxicity. The study will also assess walleye eggs exposed to sediments, and in situ fish exposures. Toxicity identification and evaluation (TIE) studies will be conducted to isolate the fractions that may affect fish development and growth.

  16. Snake and Columbia Rivers Sediment Sampling Project

    Pinza, M.R.; Word, J.Q; Barrows, E.S.; Mayhew, H.L.; Clark, D.R. (Battelle/Marine Sciences Lab., Sequim, WA (United States))


    The disposal of dredged material in water is defined as a discharge under Section 404 of the Clean Water Act and must be evaluated in accordance with US Environmental Protection Agency regulation 40 CFR 230. Because contaminant loads in the dredged sediment or resuspended sediment may affect water quality or contaminant loading, the US Army Corps of Engineers (USACE), Walla Walla District, has requested Battelle/Marine Sciences Laboratory to collect and chemically analyze sediment samples from areas that may be dredged near the Port Authority piers on the Snake and Columbia rivers. Sediment samples were also collected at River Mile (RM) stations along the Snake River that may undergo resuspension of sediment as a result of the drawdown. Chemical analysis included grain size, total organic carbon, total volatile solids, ammonia, phosphorus, sulfides, oil and grease, total petroleum hydrocarbons, metals, polynuclear aromatic hydrocarbons, pesticides, polychlorinated biphenyls, and 21 congeners of polychlorinated dibenzodioxins and dibenzofurans.

  17. Snake and Columbia Rivers Sediment Sampling Project

    Pinza, M. R.; Word, J. Q.; Barrows, E. S.; Mayhew, H. L.; Clark, D. R. [Battelle/Marine Sciences Lab., Sequim, WA (United States)


    The disposal of dredged material in water is defined as a discharge under Section 404 of the Clean Water Act and must be evaluated in accordance with US Environmental Protection Agency regulation 40 CFR 230. Because contaminant loads in the dredged sediment or resuspended sediment may affect water quality or contaminant loading, the US Army Corps of Engineers (USACE), Walla Walla District, has requested Battelle/Marine Sciences Laboratory to collect and chemically analyze sediment samples from areas that may be dredged near the Port Authority piers on the Snake and Columbia rivers. Sediment samples were also collected at River Mile (RM) stations along the Snake River that may undergo resuspension of sediment as a result of the drawdown. Chemical analysis included grain size, total organic carbon, total volatile solids, ammonia, phosphorus, sulfides, oil and grease, total petroleum hydrocarbons, metals, polynuclear aromatic hydrocarbons, pesticides, polychlorinated biphenyls, and 21 congeners of polychlorinated dibenzodioxins and dibenzofurans.

  18. Uncertainty in tsunami sediment transport modeling

    Jaffe, Bruce E.; Goto, Kazuhisa; Sugawara, Daisuke; Gelfenbaum, Guy R.; La Selle, SeanPaul M.


    Erosion and deposition from tsunamis record information about tsunami hydrodynamics and size that can be interpreted to improve tsunami hazard assessment. We explore sources and methods for quantifying uncertainty in tsunami sediment transport modeling. Uncertainty varies with tsunami, study site, available input data, sediment grain size, and model. Although uncertainty has the potential to be large, published case studies indicate that both forward and inverse tsunami sediment transport models perform well enough to be useful for deciphering tsunami characteristics, including size, from deposits. New techniques for quantifying uncertainty, such as Ensemble Kalman Filtering inversion, and more rigorous reporting of uncertainties will advance the science of tsunami sediment transport modeling. Uncertainty may be decreased with additional laboratory studies that increase our understanding of the semi-empirical parameters and physics of tsunami sediment transport, standardized benchmark tests to assess model performance, and development of hybrid modeling approaches to exploit the strengths of forward and inverse models.


    HUANG Jinchi


    Reliable quantitative estimation of bed aggradation or degradation is important for river-training and water management projects. With the development of water resources, sediment problems associated with a dam are becoming more severe. This paper describes some special problems in mathematical model for calculation of degradation and aggradation in a reservoir. The main efforts of this study are on the treatment of some physical processes of fine sediment transport (<0.05 mm). Problems in a reservoir are obviously different from a natural stream, such as the turbid current flow, orifice sediment flushing;and the initiation and consolidation of cohesive sediment deposition. The case of Liujiaxia Reservoir,which is located in the upper reaches of the Yellow River, is employed to verify the model. The results show that the model is applicable in the evaluation of an engineering planing with plenty of fine sediment movement.

  20. Assessing the potential toxicity of resuspended sediment

    Bonnet, C.; Babut, M.; Ferard, J.F.; Martel, L.; Garric, J.


    Two moderately contaminated freshwater sediments (Sorel Harbour, St. Lawrence River, Canada) were subjected to a suspension event. The objective was to assess the environmental impact of the disposal of dredged material in water, in particular, the short-term effects of dumping on the water column and the long-term effects of dredged sediment deposits. In a series of microcosms, the sediments were left to stand for 25 d under flow-through conditions. In a second series of microcosms, sediments were vigorously suspended for 15 min before being left to settle and were submitted to the same treatment as reference sediments during the following 25 d. Physicochemical and biological parameters (Daphnia magna and Hydra attenuata survival) were measured in overlying water throughout the experiment. Sediment toxicity was assessed with Chironomus tentans and Hyalella azteca exposed to sediments collected at both the beginning and end of the 25-d period. Pore-water toxicity was evaluated with D. magna. During the suspension process, in the Sorel Harbour mixed sediment overlying water, the authors observed effects on H. attenuata survival and ammonia and metals (chromium, copper, and zinc) releases. Meanwhile, in reference (nonmixed) and mixed sediments as well as in associated pore waters, there were no significant chemical modifications no biological effects after the 25-d experiments. The developed approach, which attempts to simulate a dumping process, aims at allowing the assessment of the short- and long-term hazards resulting from a resuspension process in overlying water and in resettled sediments using both chemical and biological measurements.

  1. Biogenic silicate accumulation in sediments, Jiaozhou Bay

    LI Xuegang; SONG Jinming; DAI Jicui; YUAN Huamao; LI Ning; LI Fengye; SUN Song


    It has been widely recognized that low silicate content in seawater is a major limiting factor to phytoplankton primary production in Jiaozhou Bay. However the reason of Si-limitation remains poorly understood. In the present study we measured the biogenic silicate content and discussed the accumulation of silicate in Jiaozhou Bay sediment. The results show that the biogenic silica content in the sediment of the Jiaozhou Bay is obviously much higher than those in the Yellow Sea and the Bohai Sea. The BSi:TN ratios and BSi:16P ratios in the sediment are > 1 and the OC:BSi ratio in sediment is lower than these of Redfield ratio (106:16), indicating that the decomposition rate of OC is much higher than that for BSi in similar conditions. Therefore, the majority of the biogenic silicate was buried and thus did not participate in silicate recycling. Silicate accumulation in sediment may explain why Si limits the phytoplankton growth in the Jiaozhou Bay. Comparing the flux of biogenic silicate from sediments with primary production rate, it can be concluded that only 15.5% of biogenic silicate is hydrolyzed during the journey from surface to bottom in seawater, thus approximate 84.5% of biogenic silicate could reach the bottom. The silicate releasing rate from the sediment to seawater is considerably lower than that of sedimentation of biogenic silicate, indicating silicate accumulation in sediment too. In a word, the silicate accumulation in sediment is the key reason of silicate limiting to phytoplankton growth in Jiaozhou Bay.

  2. Modeling Sediment Bypassing around Rocky Headlands

    George, D. A.; Largier, J. L.; Pasternack, G. B.; Erikson, L. H.; Storlazzi, C. D.; Barnard, P.


    Sediment bypassing rocky headlands remains understudied despite the importance of characterizing littoral processes and sediment budgets for erosion abatement, climate change adaptation, and beach management. This study was developed to identify controlling factors on and the mechanisms supporting sediment bypassing. Sediment flux around four idealized rocky headlands was investigated using the hydrodynamic model Delft3D and spectral wave model SWAN. The experimental design involved 120 simulations to explore the influence of headland morphology, substrate composition, sediment grain size, and oceanographic forcing. Headlands represented sizes and shapes found in natural settings, grain sizes ranged from fine to medium sand, and substrates from sandy beds to offshore bedrock reefs. The oceanography included a constructed representative tide, an alongshore background current, and four wave conditions derived from observational records in the eastern Pacific Ocean. A bypassing ratio was developed for alongshore flux between upstream and downstream cross-shore transects to determine the degree of blockage by a headland. Results showed that northwesterly oblique large waves (Hs = 7 m, Tp = 16 s) generated the most flux around headlands, whereas directly incident waves blocked flux across a headland apex. The headland shape heavily influenced the sediment fate by changing the relative angle between the shoreline and the incident waves. The bypassing ratio characterized each headland's capacity to allow alongshore flux under different wave conditions. All headlands may allow flux, although larger ones block sediment more effectively, promoting their ability to be littoral cell boundaries compared to smaller headlands. The controlling factors on sediment bypassing were determined to be wave angle, shape and size of the headland, and sediment grain size. This novel numerical modeling study advances headland modeling from the generic realm to broadly applicable classes of

  3. Fluctuations and Instability in Sedimentation

    Guazzelli, Élisabeth


    This review concentrates on the fluctuations of the velocities of sedimenting spheres, and on the structural instability of a suspension of settling fibers. For many years, theoretical estimates and numerical simulations predicted the fluctuations of the velocities of spheres to increase with the size of the container, whereas experiments found no such variation. Two ideas have increased our understanding. First, the correlation length of the velocity fluctuations was found experimentally to be 20 interparticle separations. Second, in dilute suspensions, a vertical variation in the concentration due to the spreading of the front with the clear fluid can inhibit the velocity fluctuations. In a very dilute regime, a homogeneous suspension of fibers suffers a spontaneous instability in which fast descending fiber-rich columns are separated by rising fiber-sparse columns. In a semidilute regime, the settling is hindered, more so than for spheres. © 2011 by Annual Reviews. All rights reserved.

  4. Interstitial brines in playa sediments

    Jones, B.F.; Van Denburgh, A.S.; Truesdell, A.H.; Rettig, S.L.


    Study of several closed drainages in the Great Basin has shown that the interstitial solutions of shallow, fine-grained playa deposits store a large quantity of dissolved solids and are often more concentrated than associated lakes and ponds, except in peripheral zones of stream or ground-water inflow. These interstitial fluids, when compared with local runoff, impoundments, or spring waters, commonly have a distinctive ionic composition which sometimes cannot be explained by either simple mixing of surface and subsurface inflow or by evaporative concentration. At Abert Lake, Oregon, the interstitial solute concentrations increased with depth to values as much as five times greater than the lake, except where springs indicate significant ground-water input. Where Na+, Cl, and CO2 species constitute more than 90% of the solutes, Na+ Cl- ratios in the lake water are lower than in interstitial solutions of bottom cores and higher than in playa fluids. At the same time, Na+ K+ ratios are highest in the fluids of lake bottom muds and lowest in playa interstitials. In deeper playa profiles, interstitial Na+ Cl- tended to decrease with depth (5 ft. maximum). In the Abert Lake area, as in other parts of the western Great Basin, Na+ Cl- ratios are indicative of total CO2 in solution and the effects of organic decay in surficial sediments. These ratios, coupled with data on silica and bulk density, show that higher PCO2 accompanying decay promotes silicate dissolution and hydrogen ion exchange, stripping alkalis from sediment which had preferentially adsorbed K+ when entering the lake. On subsequent loss of pore fluid in the playa regime, silica initially released to solution in the lake environment is readsorbed on dissolution products. ?? 1969.

  5. Hanford contaminated sediment stabilization studies

    Bruns, L.E.; Key, K.T.; Higley, B.A.


    The major problems with radionuclide waste sites in the 200 Area plateau on the Hanford Reservation is the high degree of toxicity or Hazard Index (HI). Transport Factors (TF) are fortunately low but can increase with time and certainly with episodic events such as explosions or earthquakes. Two major tests involving surface affixation were sponsored by the Atlantic Richfield Hanford Company, one by Dowell using M-166 and the other by Battelle-Northwest comparing many different surface affixants. The latex emulsion, M-166, appeared to be well suited for the Hanford desert type area. Of the many surface affixants tested by Battelle-Northwest, Coherex and Aerospray appeared to be the best. As an emergency precaution, 200 barrels of M-166 were purchased for surface affixation in case of a range fire. The subsurface affixants laboratory and field tests include organic polymers, asphalt emulsions, concrete, AM-9, and sodium silicate-calcium chloride-foramide grouts. The applications were second containment (or leak prevention) of subsurface waste tanks and piping, grouting water wells to prevent contamination leaking to the water table, and encompassing cribs, trenches, burial grounds, and other subsurface sediment contaminations. Organic polymers added strength to the soil, but penetration of the viscous liquid was not as deep as desired; it may be good for situations requiring only a few inches penetration, such as well grouting. The asphalt emulsion looked promising as an easily injected well grouting material and it may also be good for encompassing subsurface contaminated sediment plumes. The sodium silicate-calcium chloride-foramide affixant appeared best for second containment of waste tanks but may require the help of asphalt emulsion to ensure good coverage.

  6. Importance of measuring discharge and sediment transport in lesser tributaries when closing sediment budgets

    Griffiths, Ronald; Topping, David


    Sediment budgets are an important tool for understanding how riverine ecosystems respond to perturbations. Changes in the quantity and grain size distribution of sediment within river systems affect the channel morphology and related habitat resources. It is therefore important for resource managers to know if a river reach is in a state of sediment accumulation, deficit or stasis. Many sediment-budget studies have estimated the sediment loads of ungaged tributaries using regional sediment-yield equations or other similar techniques. While these approaches may be valid in regions where rainfall and geology are uniform over large areas, use of sediment-yield equations may lead to poor estimations of loads in regions where rainfall events, contributing geology, and vegetation have large spatial and/or temporal variability.Previous estimates of the combined mean-annual sediment load of all ungaged tributaries to the Colorado River downstream from Glen Canyon Dam vary by over a factor of three; this range in estimated sediment loads has resulted in different researchers reaching opposite conclusions on the sign (accumulation or deficit) of the sediment budget for particular reaches of the Colorado River. To better evaluate the supply of fine sediment (sand, silt, and clay) from these tributaries to the Colorado River, eight gages were established on previously ungaged tributaries in Glen, Marble, and Grand canyons. Results from this sediment-monitoring network show that previous estimates of the annual sediment loads of these tributaries were too high and that the sediment budget for the Colorado River below Glen Canyon Dam is more negative than previously calculated by most researchers. As a result of locally intense rainfall events with footprints smaller than the receiving basin, floods from a single tributary in semi-arid regions can have large (≥ 10 ×) differences in sediment concentrations between equal magnitude flows. Because sediment loads do not

  7. Effects of tubificid bioturbation on pore structures in sediment and the migration of sediment particles.

    Li, Yaorui; Hua, Xiuyi; Zheng, Fang; Dong, Deming; Liang, Dapeng; Guo, Zhiyong


    In this study, the effects of tubificid bioturbation near the water-sediment interface on pore structures and the migration of sediment particles were evaluated using a series of simulations. In these experiments, the distribution and variation of the tubificid burrows and the macropores in the sediment were investigated by X-ray computed tomography (CT) and digital image collecting, without sampling or disturbing the sediment. The migration of the sediment particles was also determined using CT by adding BaSO4 microspheres to the sediment as a tracer. The effects of tubificid bioturbation on the distribution and migration of contaminants in the sediment were verified by adding Pb-containing sediment layers to the sediment. The results indicate that after the addition of the tubificids, both the burrows and the macropores in the sediments increased with time, and the rate of increase slowed gradually. With the increased worm density, the burrows and the pore structures also increased. The in-depth distribution of the burrows and macropores was determined by the settlement time of the worms: with the settlement time increasing from 3 to 19 days, the depth of the zone with the highest density of burrows and macropores increased from 0-30 to 30-50 mm and from 0-10 to 30-60 mm, respectively. The distribution of the burrows and macropores was closely related to the distribution of the tubificids. Thickening of the oxidized zones in the superficial sediments in the presence of tubificid bioturbation was also observed. The main action of tubificids on the sediment particles was the transport of particles from the inner sediment (especially in the range of 30-50 mm in depth) to the water-sediment interface. The migration of Pb in the contaminated sediment with tubificid bioturbation could be interpreted by the variation in the burrows and macropores and the migration of sediment particles. Both the formation and the variation in the burrows and macropores, as well as

  8. Managing Fine Sediment in Regulated Rivers

    Schmidt, J. C.


    A paradigm useful in managing dams and diversions is that the combined effects of changing flow regime and sediment supply perturb regulated rivers into sediment deficit or sediment surplus. In the U.S. Southwest, large dams constructed on interregional rivers typically create sediment deficit segments >100 km long. Further downstream, sediment surplus may occur if desert tributaries deliver sufficient amounts of fine sediment, such as parts of the Rio Grande, lower Green River, and Colorado River delta. Sediment surplus also occurs on most smaller regional rivers. The protocols for managing rivers perturbed into sediment deficit have been refined for the Colorado River downstream from Glen Canyon Dam but are nonetheless challenged by externally determined water-supply agreements that require annual water deliveries that sometimes occur when there has been little tributary resupply. Virtually all of the naturally supplied sand to the depleted, 100-km long Marble Canyon comes from the Paria River. The sand delivery rate since 2012 was sufficiently large to trigger short-duration controlled floods under the High Flow Experiment (HFE) Protocol. The sand mass balance of Marble Canyon since 2012 when the HFE Protocol was adopted was positive due to the combination of relatively large sand delivery from the Paria River and average total annual flows. Large total annual flows have the potential to export large amounts of sand and create a negative sand mass balance. Despite the challenge of managing a scarce and highly variable sand supply and occasional years of large reservoir releases, the long-term (2006-2015) sand mass balance for the upstream half of Marble Canyon is indeterminant and is positive for the downstream half of Marble Canyon. The apparent success of managing sand in Grand Canyon under deficit conditions suggests that fine sediment management protocols might be developed for other regulated rivers. Implementation would require establishment of networks of

  9. Temporal variability of suspended sediment sources in an alpine catchment combining river/rainfall monitoring and sediment fingerprinting

    Navratil, O.; Evrard, O.; Esteves, Michel; Legout, C.; Ayrault, S.; Nemery, J.; Mate-Marin, A.; .M. Ahmadi; Lefevre, I.; Poirel, A.; Bonte, P.


    Influence of the rainfall regime on erosion and transfer of suspended sediment in a 905-km(2) mountainous catchment of the southern French Alps was investigated by combining sediment monitoring, rainfall data, and sediment fingerprinting (based on geochemistry and radionuclide concentrations). Suspended sediment yields were monitored between October 2007 and December 2009 in four subcatchments (22-713km(2)). Automatic sediment sampling was triggered during floods to trace the sediment origin ...

  10. Erosion, sediment transportation and accumulation in rivers



    The present paper analyses the interrelation between erosion,sediment transportation and accumulation proposed by N.I.Makkaveyev (1908-1983) and its further development in modem studies of river channel processes in Russia.Spatio-temporal linkages between erosion and accumulation are defined considering channel processes at different scales - river longitudinal profile,channel morphological patterns,alluvial bedforms (bars,dunes) and individual sediment particles.Relations between river geomorphic activity,flow transportation capacity and sediment budgets are established (sediment input and output;channel bed erosion and sediment entrainment into flow -termination of sediment transport and its deposition).Channel planforms,floodplain segments separated by the latter and alluvial channel bedforms are shown to be geomorphic expressions of sediment transport process at different spatial and temporal scales.This paper is dedicated to the 100th anniversary of N.I.Makkaveyev,Professor of the Moscow State University,author of the book "River channel and erosion in its basin" (1955).That book is regarded in Russia as the pioneering work which initiated the complex hydrological and geographical studies of channel processes and laid a basis for the theory of unified fluvial erosion-accumulation process.

  11. Multi-Fraction Bayesian Sediment Transport Model

    Mark L. Schmelter


    Full Text Available A Bayesian approach to sediment transport modeling can provide a strong basis for evaluating and propagating model uncertainty, which can be useful in transport applications. Previous work in developing and applying Bayesian sediment transport models used a single grain size fraction or characterized the transport of mixed-size sediment with a single characteristic grain size. Although this approach is common in sediment transport modeling, it precludes the possibility of capturing processes that cause mixed-size sediments to sort and, thereby, alter the grain size available for transport and the transport rates themselves. This paper extends development of a Bayesian transport model from one to k fractional dimensions. The model uses an existing transport function as its deterministic core and is applied to the dataset used to originally develop the function. The Bayesian multi-fraction model is able to infer the posterior distributions for essential model parameters and replicates predictive distributions of both bulk and fractional transport. Further, the inferred posterior distributions are used to evaluate parametric and other sources of variability in relations representing mixed-size interactions in the original model. Successful OPEN ACCESS J. Mar. Sci. Eng. 2015, 3 1067 development of the model demonstrates that Bayesian methods can be used to provide a robust and rigorous basis for quantifying uncertainty in mixed-size sediment transport. Such a method has heretofore been unavailable and allows for the propagation of uncertainty in sediment transport applications.

  12. Deposited sediment settlement and consolidation mechanisms

    Shuai-jie Guo


    Full Text Available In order to study deposited sediment settlement and consolidation mechanisms, sediment settlement experiments were conducted using a settlement column. Based on the experimental results, sediment settlement stage definition, excessive pore pressure (EPP dissipation, and consolidation constitutive equations are discussed. Three stages, including the free settlement, hindered settlement, and self-weight consolidation settlement stages, are defined. The results of this study show that sediment settlement is mainly affected by the initial sediment concentration and initial settlement height, and the interface settlement rate is attenuated linearly with time on bilogarithmic scales during the hindered settlement and self-weight consolidation settlement stages. Moreover, the deposited sediment layer in the self-weight consolidation settlement stage experiences large strains, and the settlement amount in this stage is about 32% to 59% of the initial height of deposited sediment. EPP is nonlinearly distributed in the settlement direction, and consolidation settlement is faster than EPP dissipation in the self-weight consolidation settlement stage. Consolidation constitutive equations for the hydraulic conductivity and effective stress, applicable to large-strain consolidation calculation, were also determined and fitted in the power function form.

  13. Modeling sediment transport in river networks

    Wang, Xu-Ming; Hao, Rui; Huo, Jie; Zhang, Jin-Feng


    A dynamical model is proposed to study sediment transport in river networks. A river can be divided into segments by the injection of branch streams of higher rank. The model is based on the fact that in a real river, the sediment-carrying capability of the stream in the ith segment may be modulated by the undergone state, which may be erosion or sedimentation, of the i-1th and ith segments, and also influenced by that of the ith injecting branch of higher rank. We select a database about the upper-middle reach of the Yellow River in the lower-water season to test the model. The result shows that the data, produced by averaging the erosion or sedimentation over the preceding transient process, are in good agreement with the observed average in a month. With this model, the steady state after transience can be predicted, and it indicates a scaling law that the quantity of erosion or sedimentation exponentially depends on the number of the segments along the reach of the channel. Our investigation suggests that fluctuation of the stream flow due to random rainfall will prevent this steady state from occurring. This is owing to the phenomenon that the varying trend of the quantity of erosion or sedimentation is opposite to that of sediment-carrying capability of the stream.

  14. The suspended sediment transport equation and its near-bed sediment flux


    The suspended sediment transport equation and its near-bed sediment flux are one of the key problems of sediment transport research under nonequilibrium condition. Based on the three-dimensional primitive suspended transport equation, the two-dimensional suspended sediment transport equation is deduced. The derived process indicates that the physical essence of the near-bed sediment flux is right the bottom boundary condition for the suspended sediment transport equation. This paper analyzes the internal relations between the two methods of sediment carrying capacity and shear stress in common use, points out the consistency of these two methods in terms of form and physical meaning, and unifies these two methods theoretically. Furthermore, based on the analysis and comparison of the expressions of the near-bed sediment flux, this paper summarizes some problems to which attention should be paid, thus offering a novel approach to the study and the solution of the problems of suspended sediment transport and exchange flux of near-bed water sediment.

  15. Investigation about data reduction and sedimentation distance of sedimentation balance method

    Fukui, K.; Yoshida, H.; Shiba, M.; Tokunaga, Y. [Hiroshima University, Hiroshima (Japan). Dept. of Chemical Engineering


    The sedimentation balance type particle size analyzer is improved. The slurry supply device was automated and the height of peripheral wall of the detective tray was raised. As a result we can acquire data of the sedimentation mass change accurately. Moreover, the ratio of measured total sedimentation mass to the theoretical total sedimentation mass was kept constant ranging from 1.00 to 1.02 independent of particle size. By the above improvement, we can develop a more precious sedimentation balance. Twomey's non-linear iteration method was applied to retrieve a particle size distribution from the sedimentation curve measured with a sedimentation balance method. It is found that the non-linear iteration method can calculate size distributions accurately. Furthermore, the influence of the thickness at the base of the detective tray on the sedimentation distance was also investigated. As a result, it is clarified that the change in detected mass did not depend on thickness at the base of the tray. Therefore, it is concluded that the sedimentation distance in the sedimentation balance method should be defined as the distance between the lower surface of the base of the tray and suspension surface. (author)

  16. A process-based model for aeolian sediment transport and spatiotemporal varying sediment availability

    Hoonhout, Bas M.; Vries, Sierd de


    Aeolian sediment transport is influenced by a variety of bed surface properties, like moisture, shells, vegetation, and nonerodible elements. The bed surface properties influence aeolian sediment transport by changing the sediment transport capacity and/or the sediment availability. The effect of bed surface properties on the transport capacity and sediment availability is typically incorporated through the velocity threshold. This approach appears to be a critical limitation in existing aeolian sediment transport models for simulation of real-world cases with spatiotemporal variations in bed surface properties. This paper presents a new model approach for multifraction aeolian sediment transport in which sediment availability is simulated rather than parameterized through the velocity threshold. The model can cope with arbitrary spatiotemporal configurations of bed surface properties that either limit or enhance the sediment availability or sediment transport capacity. The performance of the model is illustrated using four prototype cases, the simulation of two wind tunnel experiments from literature and a sensitivity analysis of newly introduced parameters.

  17. Equilibrium sediment transport in lower Yellow River during later sediment-retaining period of Xiaolangdi Reservoir

    Shao-lei Guo; Dong-po Sun; En-hui Jiang; Peng Li


    The Xiaolangdi Reservoir has entered the later sediment-retaining period, and new sediment transport phenomena and channel re-estab-lishing behaviors are appearing. A physical model test was used to forecast the scouring and silting trends of the lower Yellow River. Based on water and sediment data from the lower Yellow River during the period from 1960 to 2012, and using a statistical method, this paper analyzed the sediment transport in sediment-laden flows with different discharges and sediment concentrations in the lower Yellow River. The results show that rational water-sediment regulation is necessary to avoid silting in the later sediment-retaining period. The combination of 3 000 m3/ssediment concentration) at the Huayuankou section is considered an optimal combination for equilibrium sediment transport in the lower Yellow River over a long period of time.

  18. The suspended sediment transport equation and its near-bed sediment flux

    LI RuiJie; LUO Feng; ZHU WenJin


    The suspended sediment transport equation and its near-bed sediment flux are one of the key prob-lems of sediment transport research under nonequilibrium condition. Based on the three-dimensional primitive suspended transport equation, the two-dimensional suspended sediment transport equation is deduced. The derived process indicates that the physical essence of the near-bed sediment flux is right the bottom boundary condition for the suspended sediment transport equation. This paper ana-lyzes the internal relations between the two methods of sediment carrying capacity and shear stress in common use, points out the consistency of these two methods in terms of form and physical meaning, and unifies these two methods theoretically. Furthermore, based on the analysis and comparison of the expressions of the near-bed sediment flux, this paper summarizes some problems to which attention should be paid, thus offering a novel approach to the study and the solution of the problems of sus-pended sediment transport and exchange flux of near-bed water sediment.

  19. Microbial interactions with naturally occurring hydrophobic sediments: Influence on sediment and associated contaminant mobility.

    Droppo, I G; Krishnappan, B G; Lawrence, J R


    The erosion, transport and fate of sediments and associated contaminants are known to be influenced by both particle characteristics and the flow dynamics imparted onto the sediment. The influential role of bitumen containing hydrophobic sediments and the microbial community on sediment dynamics are however less understood. This study links an experimental evaluation of sediment erosion with measured sediment-associated contaminant concentrations and microbial community analysis to provide an estimate of the potential for sediment to control the erosion, transport and fate of contaminants. Specifically the paper addresses the unique behaviour of hydrophobic sediments and the role that the microbial community associated with hydrophobic sediment may play in the transport of contaminated sediment. Results demonstrate that the hydrophobic cohesive sediment demonstrates unique transport and particle characteristics (poor settling and small floc size). Biofilms were observed to increase with consolidation/biostabilization times and generated a unique microbial consortium relative to the eroded flocs. Natural oil associated with the flocs appeared to be preferentially associated with microbial derived extracellular polymeric substances. While PAHs and naphthenic acid increased with increasing shear (indicative of increasing loads), they tended to decrease with consolidation/biostabilization (CB) time at similar shears suggesting a chemical and/or biological degradation. PAH and napthenic acid degrading microbes decreased with time as well, which may suggest that there was a reduced pool of PAHs and naphthenic acids available resulting in their die off. This study emphasizes the importance that any management strategies and operational assessments for the protection of human and aquatic health incorporate the sediment (suspended and bed sediment) and biological (biofilm) compartments and the energy dynamics within the system in order to better predict contaminant

  20. Sedimentation in mountain streams: A review of methods of measurement

    Hedrick, Lara B.; Anderson, James T.; Welsh, Stuart; Lin, Lian-Shin


    The goal of this review paper is to provide a list of methods and devices used to measure sediment accumulation in wadeable streams dominated by cobble and gravel substrate. Quantitative measures of stream sedimentation are useful to monitor and study anthropogenic impacts on stream biota, and stream sedimentation is measurable with multiple sampling methods. Evaluation of sedimentation can be made by measuring the concentration of suspended sediment, or turbidity, and by determining the amount of deposited sediment, or sedimentation on the streambed. Measurements of deposited sediments are more time consuming and labor intensive than measurements of suspended sediments. Traditional techniques for characterizing sediment composition in streams include core sampling, the shovel method, visual estimation along transects, and sediment traps. This paper provides a comprehensive review of methodology, devices that can be used, and techniques for processing and analyzing samples collected to aid researchers in choosing study design and equipment.

  1. Improving Fishpond Sediment by Aquatic Vegetable Rotation

    Ling Tao


    Full Text Available Continuously intensive fish farming results in pond degradation that needs to be improved. Therefore, the experiment rotating intensive fish culture with two aquatic vegetables lotus (Nelumbo nucifera and water chestnuts (Eleocharis dulcis cultivation is conducted aiming at determining the effect of rotation as a sediment management technique on improving the pond sediment and assessing the food safety risk of the vegetables cultivated in the pond sediment from the aspects of heavy metal. The results showed that after rotation, the content of Total Nitrogen (TN and Organic Matter (OM in the upper 10 cm sediment decreased significantly (p<0.05, with TN content reduced 1.05 and 0.74 g/kg; OM content reduced 0.59 and 0.37%, respectively. The contents of Organic-Phosphorus (OP and Fe/Al-bound Phosphorus (Fe/Al-P in the sediment decreased significantly (p<0.05, with OP reduced 0.05 and 0.04 g/kg, Fe/Al-P reduced 0.19 and 0.15 g/kg, respectively. The heavy metal contents of As, Pb, Cd, Hg, Cr and Zn except Cu in the pond sediment were under Chinese National II Soil Criterion and the contents of As, Pb, Cd, Hg, Cr, Cu and Zn in edible vegetable rhizomes satisfied Safety Requirements for Non-environmental Pollution Vegetable. Rotation of fish culture with aquatic vegetables cultivation effectively mitigated excessive nutrient load in the sediment while recycled the nutrient in the sediment to produce safe vegetables. It could be considered as a viable sediment quality improving technique.

  2. Non-uniform sediment incipient velocity

    Haitao XU; Jinyou LU; Xiaobin LIU


    Based on the mechanism of non-uniform sediment incipient motion,the dragging force and uplift force coefficient expressions are put forward for the non-uniform bed material exposure and close alignment state.The incipient veiocity formula of the non-uniform sediment is then established.It is shown that the formula structure is reasonable,and fine particles of the non-uniform sediment are more difficult to set into motion than the same sized uniform particles,whereas coarser particles are easier to set into motion than their uniform equivalents.The validity of the formula is verified by field and experiment data.

  3. Remediation technologies for oil-contaminated sediments.

    Agarwal, Ashutosh; Liu, Yu


    Oil-contaminated sediments pose serious environmental hazards for both aquatic and terrestrial ecosystems. Innovative and environmentally compatible technologies are urgently required to remove oil-contaminated sediments. In this paper, various physical, chemical and biological technologies are investigated for the remediation of oil-contaminated sediments such as flotation and washing, coal agglomeration, thermal desorption, ultrasonic desorption, bioremediation, chemical oxidation and extraction using ionic liquids. The basic principles of these technologies as well as their advantages and disadvantages for practical application have been discussed. A combination of two or more technologies is expected to provide an innovative solution that is economical, eco-friendly and adaptable.

  4. What controls sediment flux in dryland channels?

    Michaelides, K.; Singer, M. B.


    Theories for the development of longitudinal and grain size profiles in perennial fluvial systems are well developed, allowing for generalization of sediment flux and sorting in these fluvial systems over decadal to millennial time scales under different forcings (e.g., sediment supply, climate changes, etc). However, such theoretical frameworks are inadequate for understanding sediment flux in dryland channels subject to spatially and temporally discontinuous streamflow, where transport capacity is usually much lower than sediment supply. In such fluvial systems, channel beds are poorly sorted with weak vertical layering, poorly defined bar forms, minimal downstream fining, and straight longitudinal profiles. Previous work in dryland channels has documented sediment flux at higher rates than their humid counterparts once significant channel flow develops, pulsations in bed material transport under constant discharge, and oscillations in dryland channel width that govern longitudinal patterns in erosion and deposition. These factors point to less well appreciated controls on sediment flux in dryland valley floors that invite further study. This paper investigates the relative roles of hydrology, bed material grain size, and channel width on sediment flux rates in the Rambla de Nogalte in southeastern Spain. Topographic valley cross sections and hillslope and channel particle sizes were collected from an ephemeral-river reach. Longitudinal grain-size variation on the hillslopes and on the channel bed were analysed in order to determine the relationship between hillslope supply characteristics and channel grain-size distribution and longitudinal changes. Local fractional estimates of bed-material transport in the channel were calculated using a range of channel discharge scenarios in order to examine the effect of channel hydrology on sediment transport. Numerical modelling was conducted to investigate runoff connectivity from hillslopes to channel and to examine the

  5. Sediment pollution and dynamic in the Mar Piccolo of Taranto (southern Italy): insights from bottom sediment traps and surficial sediments.

    Bellucci, Luca Giorgio; Cassin, Daniele; Giuliani, Silvia; Botter, Margherita; Zonta, Roberto


    Major and trace element, PAH, and PCB concentrations were measured in surface sediments and particles from sediment traps collected in the First and Second Basin of the Mar Piccolo (Gulf of Taranto) in two periods (June-July and August-September, 2013). The aim of the study was to evaluate pollution degree, sediment transport and particle redistribution dynamic within the area. Results confirm the higher contamination of sediments from the First Basin observed by previous researches, particularly for Cu, Hg, Pb, total PAHs, and total PCBs. Advective transport from the First to the Second Basin appears to be the leading transfer mechanism of particles and adsorbed contaminants, as evidenced by measured fluxes and statistical analyses of contaminant concentrations in surficial sediments and particles from sediment traps. Long-range selective transports of PAHs and microbial anaerobic degradation processes for PCBs have been also observed. These results are limited to a restricted time window but are consistent with the presence of transport fluxes at the bottom of the water column. This mechanism deserves further investigation and monitoring activities, potentially being the main responsible of pollutant delivering to the less contaminated sectors of the Mar Piccolo.

  6. A probabilistic sediment cascade model of sediment transfer through a mountain basin

    Bennett, G. L.; Molnar, P.; McArdell, B. W.; Lane, S. N.; Burlando, P.


    Mountain basin sediment discharge poses a significant hazard to the downstream population, particularly in the form of debris flows. The importance and sensitivity of snow and ice melt processes in mountain basins along with their rapid rainfall-runoff response makes mountain basin sediment discharge particularly responsive to climate change. It is important to understand and model sediment transfer through mountain basins to be able to predict sediment discharge under a changing climate. We developed a probabilistic sediment cascade model, SedCas, to simulate sediment transfer in a mountain basin (Illgraben, Switzerland) where sediment is produced by hillslope landslides and exported out of the basin by debris flows and floods. We present the model setup, the calibration of the model for the period 2000 - 2009 and the application of SedCas to model sediment discharge in the Illgraben over the 19th and 20th centuries. SedCas conceptualizes the fluvial system as a spatially lumped cascade of connected reservoirs representing hillslope and channel storages where sediment goes through multiple cycles of storage and remobilization by surface runoff. Sediment input is drawn from a probability distribution of slope failures produced for the basin from a time series of DEMs and the model is driven by observed climate. The model includes all relevant hydrological processes that lead to runoff in an Alpine basin, such as snow cover accumulation, snowmelt, evapotranspiration, and soil water storage. Although the processes of sediment transfer and debris flow generation are described in a simplified manner, SedCas produces highly complex sediment discharge behavior which is driven by the availability of sediment and antecedent moisture (system memory) as well as triggering potential (climate). The model reproduces the first order properties of observed debris flows over the period 2000-2009 including their probability distribution, seasonal timing and probability of

  7. Sediment availability on burned hillslopes

    Nyman, Petter; Sheridan, Gary J.; Moody, John A.; Smith, Hugh G.; Noske, Philip J.; Lane, Patrick N. J.


    describes the inherent resistance of soil to erosion. Hillslope erosion models typically consider erodibility to be constant with depth. This may not be the case after wildfire because erodibility is partly determined by the availability of noncohesive soil and ash at the surface. This study quantifies erodibility of burned soils using methods that explicitly capture variations in soil properties with depth. Flume experiments on intact cores from three sites in western United States showed that erodibility of fire-affected soil was highest at the soil surface and declined exponentially within the top 20 mm of the soil profile, with root density and soil depth accounting for 62% of the variation. Variation in erodibility with depth resulted in transient sediment flux during erosion experiments on bounded field plots. Material that contributed to transient flux was conceptualized as a layer of noncohesive material of variable depth (dnc). This depth was related to shear strength measurements and sampled spatially to obtain the probability distribution of noncohesive material as a function of depth below the surface. After wildfire in southeast Australia, the initial dnc ranged from 7.5 to 9.1 mm, which equated to 97-117 Mg ha-1 of noncohesive material. The depth decreased exponentially with time since wildfire to 0.4 mm (or < 5 Mg ha-1) after 3 years of recovery. The results are organized into a framework for modeling fire effects on erodibility as a function of the production and depletion of the noncohesive layer overlying a cohesive layer.

  8. Shallow sediment transport flow computation using time-varying sediment adaptation length

    Jaan Hui PU; Khalid HUSSAIN; Song-dong SHAO; Yue-fei HUANG


    Based on the common approach, the adaptation length in sediment transport is normally estimated astemporally independent. However, this approach might not be theoretically justified as the process of reaching the sediment transport equilibrium stage is affected by the flow conditions in time, especially for fast moving flows, such as scour-hole developing flows. In this study, the two-dimensional (2D) shallow water formulation together with a sediment continuity-concentration (SCC) model were applied to flow with mobile sediment boundary. A time-varying approach was proposed to determine the sediment transport adaptation length to simulate the sediment erosion-deposition rate. The proposed computational model was based on the Finite Volume (FV) method. The Monotone Upwind Scheme of Conservative Laws (MUSCL)-Hancock scheme was used with the Harten Lax van Leer-contact (HLLC) approximate Riemann solver to discretize the FV model. In the flow applications of this paper, a highly discontinuous dam-break, fast sediment transport flow was used to calibrate the proposed time-varying sediment adaptation length model. Then the calibrated model was further applied to two separate experimental sediment transport flow applications documented in the literature, i.e. a highly concentrated sediment transport flow in a wide alluvial channel and a sediment aggradation flow. Good agreement with the experimental data were obtained with the proposed model simulations. The tests prove that the proposed model, which was calibrated by the discontinuous dam-break bed scouring flow, also performed well to represent rapid bed change and steady sediment mobility conditions.

  9. Delaware River and Upper Bay Sediment Data

    National Oceanic and Atmospheric Administration, Department of Commerce — The area of coverage consists of 192 square miles of benthic habitat mapped from 2005 to 2007 in the Delaware River and Upper Delaware Bay. The bottom sediment map...

  10. Fisheries Sediment Data (WIGLEY65 shapefile)

    U.S. Geological Survey, Department of the Interior — This is a part of the National Geophysical Data Center (NGDC) Seafloor Surficial Sediment (Deck 41) Data File. Deck 41 is an original data file created by the Marine...

  11. Stabilization of bottom sediments from Rzeszowski Reservoir

    Koś Karolina


    Full Text Available The paper presents results of stabilization of bottom sediments from Rzeszowski Reservoir. Based on the geotechnical characteristics of the tested sediments it was stated they do not fulfill all the criteria set for soils in earth embankments. Therefore, an attempt to improve their parameters was made by using two additives – cement and lime. An unconfined compressive strength, shear strength, bearing ratio and pH reaction were determined on samples after different time of curing. Based on the carried out tests it was stated that the obtained values of unconfined compressive strength of sediments stabilized with cement were relatively low and they did not fulfill the requirements set by the Polish standard, which concerns materials in road engineering. In case of lime stabilization it was stated that the tested sediments with 6% addition of the additive can be used for the bottom layers of the improved road base.

  12. The NGDC Seafloor Sediment Geotechnical Database

    National Oceanic and Atmospheric Administration, Department of Commerce — The NGDC Seafloor Sediment Geotechnical Properties Database contains test engineering properties data coded by students at NGDC from primarily U.S. Naval...

  13. Quantitative paleoparasitology applied to archaeological sediments

    Martín H Fugassa


    Full Text Available Three techniques to extract parasite remains from archaeological sediments were tested. The aim was to improve the sensibility of recommended paleoparasitological techniques applied in archaeological remains. Sediment collected from the pelvic girdle of a human body found in Cabo Vírgenes, Santa Cruz, Argentina, associated to a Spanish settlement founded in 1584 known as Nombre de Jesús, was used to search for parasites. Sediment close to the skull was used as control. The techniques recommended by Jones, Reinhard, and Dittmar and Teejen were used and compared with the modified technique presented here, developed to improve the sensibility to detect parasite remains. Positive results were obtained only with the modified technique, resulting in the finding of Trichuris trichiura eggs in the sediment.

  14. Emission Facilities - Erosion & Sediment Control Facilities

    NSGIC Education | GIS Inventory — An Erosion and Sediment Control Facility is a DEP primary facility type related to the Water Pollution Control program. The following sub-facility types related to...

  15. Isolation of Cellulolytic Actinomycetes from Marine Sediments

    Veiga, Manuel; Esparis, Azucena; Fabregas, Jaime


    The cellulolytic activity of 36 actinomycetes strains isolated from marine sediments was investigated by the cellulose-azure method. Approximately 50% of the isolates exhibited various degrees of cellulolytic activity.

  16. Sediment Analysis Network for Decision Support (SANDS)

    Hardin, D. M.; Keiser, K.; Graves, S. J.; Conover, H.; Ebersole, S.


    Since the year 2000, Eastern Louisiana, coastal Mississippi, Alabama, and the western Florida panhandle have been affected by 28 tropical storms, seven of which were hurricanes. These tropical cyclones have significantly altered normal coastal processes and characteristics in the Gulf region through sediment disturbance. Although tides, seasonality, and agricultural development influence suspended sediment and sediment deposition over periods of time, tropical storm activity has the capability of moving the largest sediment loads in the shortest periods of time for coastal areas. The importance of sediments upon water quality, coastal erosion, habitats and nutrients has made their study and monitoring vital to decision makers in the region. Currently agencies such as United States Army Corps of Engineers (USACE), NASA, and Geological Survey of Alabama (GSA) are employing a variety of in-situ and airborne based measurements to assess and monitor sediment loading and deposition. These methods provide highly accurate information but are limited in geographic range, are not continuous over a region and, in the case of airborne LIDAR are expensive and do not recur on a regular basis. Multi-temporal and multi-spectral satellite imagery that shows tropical-storm-induced suspended sediment and storm-surge sediment deposits can provide decision makers with immediate and long-term information about the impacts of tropical storms and hurricanes. It can also be valuable for those conducting research and for projects related to coastal issues such as recovery, planning, management, and mitigation. The recently awarded Sediment Analysis Network for Decision Support will generate decision support products using NASA satellite observations from MODIS, Landsat and SeaWiFS instruments to support resource management, planning, and decision making activities in the Gulf of Mexico. Specifically, SANDS will generate decision support products that address the impacts of tropical storms

  17. Geophysical Processes - Erosion & Sediment Control Facilities

    NSGIC GIS Inventory (aka Ramona) — An Erosion and Sediment Control Facility is a DEP primary facility type related to the Water Pollution Control program. The following sub-facility types related to...

  18. Particle suspension in sediment-laden flow


    Many theories have been developed for predicting the vertical profiles of suspended sediment concentration in sediment-laden flows. An overview of various recent investigations is given herein. The generalization of the existing formulas and the interpretation of the typical sediment distributions are discussed in terms of continuum and kinetic concepts. The continuum assumption, which has been proved very successful for descriptions of liquid fluid motion, seems insufficient to describe motions of discrete solid particles in two-phase flows. Stochastic models can be used to approach the motion of the individual particles in the fluid, but are unsuitable for simulating interactions between solid particles. The analogy of kinetic theory in sediment-laden flows offers a promising alternative approach, and is expected for the applications in hyper-concentrated flow studies.


    The amendments apatite, organoclay, acetate, chitin, and geotextile reactive mats containing apatite and apatite + organoclay are currently under examination for remediation of contaminated sediments. The objective of this research is to evaluate toxicity to several estuarine an...

  20. Scripps Sediment Description File- OCSEAP Portion

    National Oceanic and Atmospheric Administration, Department of Commerce — The Scripps Institution of Oceanography compiled descriptions of sediment samples in the Alaskan Outer Continental Shelf area, funded through the NOAA Outer...

  1. Landfill liners from dam reservoir sediments

    Koś Karolina


    Full Text Available Landfill liners from dam reservoir sediments. Every municipal solid waste landfill has to be properly secured to protect the natural environment from possible leachate. Most often an artificial sealing is used, which is based on a soil liner from cohesive soils (clays, silts. Usability evaluation of bottom sediments from Rzeszowski Reservoir for building these liners was presented in the paper. Sediments from dam reservoirs, gathered as a result of the siltation process, can be a valuable material for earthworks purposes. Determination of their possible ways of usage is important, especially before the planned dredging, because thanks to that this material will not be put on a heap. Based on the analysis of the geotechnical parameters of these sediments it was stated that this material can be preliminary allowed for using in liners.

  2. Methods in mooring deep sea sediment traps

    Venkatesan, R.; Fernando, V.; Rajaraman, V.S.; Janakiraman, G.

    The experience gained during the process of deployment and retrieval of nearly 39 sets of deep sea sediment trap moorings on various ships like FS Sonne, ORV Sagarkanya and DSV Nand Rachit are outlined. The various problems encountered...

  3. Effects of intensive mariculture on sediment biochemistry

    Pusceddu, Antonio; Fraschetti, Simonetta; Mirto, Simone


    The exponential growth of off-shore mariculture that has occurred worldwide over the last 10 years has raised concern about the impact of the waste produced by this industry on the ecological integrity of the sea bottom. Investigations into this potential source of impact on the biochemistry...... of the sea floor have provided contrasting results, and no compelling explanations for these discrepancies have been provided to date. To quantify the impact of fish-farm activities on the biochemistry of sediments, we have investigated the quantity and biochemical composition of sediment organic matter...... regions, with the exception of seagrass sediments in Spain, the biochemistry of the sediments showed significant differences between the control and fish-farm locations. However, the variables explaining the differences observed varied among the regions and between habitats, suggesting idiosyncratic...

  4. The NGDC Seafloor Sediment Grain Size Database

    National Oceanic and Atmospheric Administration, Department of Commerce — The NGDC (now NCEI) Seafloor Sediment Grain Size Database contains particle size data for over 17,000 seafloor samples worldwide. The file was begun by NGDC in 1976...

  5. Sediment generation and provenance: processes and pathways

    Caracciolo, L.; Garzanti, E.; von Eynatten, H.; Weltje, G. J.


    The ability to trace sediments from their sources to sedimentary basins is a prerequisite for quantitative analysis of Earth-surface dynamics. The comparatively recent revival of sedimentary provenance analysis goes hand-in-hand with the ever expanding range of analytical tools available for quantifying sediment properties (isotopic, mineral, chemical, and petrographic composition, grain-size and shape distributions, age spectra, etc.), and for interpreting such data in paleo-geographic, -tectonic and -climatic terms. The breakdown of sediment budgets into source-specific contributions - one of the most important tasks of provenance analysis - permits quantification of rates of surface processes in the geological past ("deep time"), even in cases where the source areas themselves have been destroyed by global tectonics. Quantitative sedimentary provenance analysis is therefore crucial to the reconstruction of ancient sediment-routing systems, the fundamental units of mass transfer at the Earth's surface.

  6. Mercury in dated Greenland marine sediments

    Asmund, G.; Nielsen, S.P.


    Twenty marine sediment cores from Greenland were analysed for mercury, and dated by the lead-210 method. In general the cores exhibit a mercury profile with higher mercury concentrations in the upper centimetres of the core. The cores were studied by linear regression of In Hg vs, age...... of the sediment for the youngest 100 years. As a rule the mercury decreased with depth in the sediment with various degrees of significance. The increase of the mercury flux during the last 100 years is roughly a doubling. The increase may be of anthropogenic origin as it is restricted to the last 100 years....... In four cores the concentration of manganese was found also to increase in the top layers indicating diagenesis. In the other cases the higher concentrations were not accompanied by higher manganese concentrations. The mercury flux to the sediment surface was generally proportional to the Pb-210 flux...

  7. Radionuclide content of Las Vegas wash sediments

    Rudin, M.J.; Johnson, W.H.; Meyers, A.M. [University of Nevada-Las Vegas (United States). Dept. of Health Physics


    The Las Vegas Wash is an excavated waterway channel which drains all surface water and effluent discharge from sewage-treatment facilitates from the greater Las Vegas Metropolitan Area to Lake Mead. Fine and coarse sediment samples were collected at 100-m intervals and analyzed to determine the distribution of gamma-emitting radionuclides in the lower 5,500 m of the Las Vegas Wash. Results indicate depletion of long-lived fission products in upstream Wash sediments. However, trace levels of {sup 137}Cs measured in downstream sediments suggest the resuspension and transport of radioactive fallout within the Wash. Levels of {sup 40}K, {sup 232}Th, {sup 235}U, and {sup 238}U found in Wash sediments were consistent with levels typically found in southeast Nevada soils. (author).

  8. Sediment transport in ice-covered channels

    Ian KNACK; Hung-tao SHEN


    The existence of ice cover has important effects on sediment transport and channel morphology for rivers in areas with an annual occurrence of an ice season. The interaction of sediment transport and surface ice is poorly understood. In this paper, data from existing flume experiments, each with a limited range of flow and sediment transport conditions, are analyzed. The analysis showed that the bed load transport in ice-covered channels can be described by conventional relationships for the equivalent free-surface flow if the flow strength is expressed in terms of the bed shear stress. A modified Rouse formulation considering the effect of the ice cover on velocity and turbulent diffusion is shown to be applicable for calculating the suspended sediment transport discharge.

  9. Flux saturation length of sediment transport.

    Pähtz, Thomas; Kok, Jasper F; Parteli, Eric J R; Herrmann, Hans J


    Sediment transport along the surface drives geophysical phenomena as diverse as wind erosion and dune formation. The main length scale controlling the dynamics of sediment erosion and deposition is the saturation length Ls, which characterizes the flux response to a change in transport conditions. Here we derive, for the first time, an expression predicting Ls as a function of the average sediment velocity under different physical environments. Our expression accounts for both the characteristics of sediment entrainment and the saturation of particle and fluid velocities, and has only two physical parameters which can be estimated directly from independent experiments. We show that our expression is consistent with measurements of Ls in both aeolian and subaqueous transport regimes over at least 5 orders of magnitude in the ratio of fluid and particle density, including on Mars.

  10. Microplastic pollution in deep-sea sediments.

    Van Cauwenberghe, Lisbeth; Vanreusel, Ann; Mees, Jan; Janssen, Colin R


    Microplastics are small plastic particles (microplastics have been accumulating in the marine environment for decades and have been detected throughout the water column and in sublittoral and beach sediments worldwide. However, up to now, it has never been established whether microplastic presence in sediments is limited to accumulation hot spots such as the continental shelf, or whether they are also present in deep-sea sediments. Here we show, for the first time ever, that microplastics have indeed reached the most remote of marine environments: the deep sea. We found plastic particles sized in the micrometre range in deep-sea sediments collected at four locations representing different deep-sea habitats ranging in depth from 1100 to 5000 m. Our results demonstrate that microplastic pollution has spread throughout the world's seas and oceans, into the remote and largely unknown deep sea.

  11. Pattern recognition of laminated sediments methodology

    Barba-Rojo, Perla Karina; Solorza-Calderón, Selene; González-Fernández, Antonio


    This work presents a different aproach for laminae counting and thickness measurements on laminated sediment images. This is done by the use of morphological operations and minimum variance quantization.

  12. Deck41 Surficial Seafloor Sediment Description Database

    National Oceanic and Atmospheric Administration, Department of Commerce — Deck41 is a digital summary of surficial sediment composition for 36,401 seafloor samples worldwide. Data include collecting source, ship, cruise, sample id,...

  13. Chlorinated pesticide residues in marine sediments

    Sarkar, A.; SenGupta, R.

    A number of organochlorine pesticides residues, aldrine, gamma BHC, dieldrine, and DDT were detected and quantified from the marine sediments collected along the east coast of India by gas chromatography using an electron capture detector. Almost...

  14. Long Island Sound Surficial Sediment Data (LISSEDDATA)

    U.S. Geological Survey, Department of the Interior — Many scientific questions and policy issues related to sediments in Long Island Sound require data of historical, regional and interdisciplinary scope. Existent data...

  15. Magnesium Isotopic Composition of Subducting Marine Sediments

    Hu, Y.; Teng, F. Z.; Plank, T. A.; Huang, K. J.


    Subducted marine sediments have recently been called upon to explain the heterogeneous Mg isotopic composition (δ26Mg, ‰) found in mantle wehrlites (-0.39 to +0.09 [1]) in the context of a homogeneous mantle (-0.25 ± 0.07 [2]). However, no systematic measurements of δ26Mg on marine sediments are currently available to provide direct support to this model. To characterize the Mg inputs to global subduction zones, we measured δ26Mg data for a total of 90 marine sediments collected from 12 drill sites outboard of the world's major subduction zones. These sediments span a 1.73‰ range in δ26Mg. The detritus-dominated sediments have δ26Mg (-0.59 to +0.53) comparable to those of weathered materials on continents (e.g. -0.52 to +0.92 [3]), while the calcareous oozes yield δ26Mg (as light as -1.20) more similar to the seawater value (-0.83 [4]). The negative correlation between δ26Mg and CaO/Al2O3 in these sediments indicates the primary control of mineralogy over the Mg isotopic distribution among different sediment types, as carbonates are enriched in light Mg isotopes (-5.10 to -0.40 [5]) whereas clay-rich weathering residues generally have heavier δ26Mg (e.g. up to +0.65 in saprolite [6]). In addition, chemical weathering and grain-size sorting drive sediments to a heavier δ26Mg, as indicated by the broad positive trends between δ26Mg with CIA (Chemical Index of Alteration [7]) and Al2O3/SiO2, respectively. Collectively, the arc systems sampled in this study represent ~30% of global arc length and the extrapolated global Mg flux of subducting marine sediments accounts for ~9% of the yearly Mg riverine input with a flux-weighted average δ26Mg at -0.26. Subduction of these heterogeneous sediments may not cause significant mantle heterogeneity on a global scale, but the highly variable Mg fluxes and δ26Mg of sediments delivered to different trenches are capable of producing local mantle variations. Volcanic rocks sourced from these mantle domains are thus

  16. A Manual to Identify Sources of Fluvial Sediment

    Sedimentation is one of the main causes of stream/river aquatic life use impairments in R3. Currently states lack standard guidance on appropriate tools available to quantify sediment sources and develop sediment budgets in TMDL Development. Methods for distinguishing sediment t...

  17. Contaminant release from sediments: a mass flux approach

    Smit, M.P.J.


    With the predicted climate change it is expected that the chances of flooding increase. During flood events sediments will suspend and if sediments are polluted, contaminants can be released to water. Also under gentle flow regimes, when sediments are settled and form a sediment bed, transfer of

  18. Alkaline Phosphatase Assay for Freshwater Sediments: Application to Perturbed Sediment Systems

    Sayler, Gary S.; Puziss, Marla; Silver, Martin


    The p-nitrophenyl phosphate hydrolysis-phosphatase assay was modified for use in freshwater sediment. Laboratory studies indicated that the recovery of purified alkaline phosphatase activity was 100% efficient in sterile freshwater sediments when optimized incubation and sonication conditions were used. Field studies of diverse freshwater sediments demonstrated the potential use of this assay for determining stream perturbation. Significant correlations between phosphatase and total viable cell counts, as well as adenosine triphosphate biomass, suggested that alkaline phosphatase activity has utility as an indicator of microbial population density and biomass in freshwater sediments. PMID:16345464

  19. Age Dating Fluvial Sediment Storage Reservoirs to Construct Sediment Waiting Time Distributions

    Skalak, K.; Pizzuto, J. E.; Benthem, A.; Karwan, D. L.; Mahan, S.


    Suspended sediment transport is an important geomorphic process that can often control the transport of nutrients and contaminants. The time a particle spends in storage remains a critical knowledge gap in understanding particle trajectories through landscapes. We dated floodplain deposits in South River, VA, using fallout radionuclides (Pb-210, Cs-137), optically stimulated luminescence (OSL), and radiocarbon dating to determine sediment ages and construct sediment waiting time distributions. We have a total of 14 age dates in two eroding banks. We combine these age dates with a well-constrained history of mercury concentrations on suspended sediment in the river from an industrial release. Ages from fallout radionuclides document sedimentation from the early 1900s to the present, and agree with the history of mercury contamination. OSL dates span approximately 200 to 17,000 years old. We performed a standard Weibull analysis of nonexceedance to construct a waiting time distribution of floodplain sediment for the South River. The mean waiting time for floodplain sediment is 2930 years, while the median is approximately 710 years. When the floodplain waiting time distribution is combined with the waiting time distribution for in-channel sediment storage (available from previous studies), the mean waiting time shifts to approximately 680 years, suggesting that quantifying sediment waiting times for both channel and floodplain storage is critical in advancing knowledge of particle trajectories through watersheds.

  20. Simulation of suspended sediment transport initialized with satellite derived suspended sediment concentrations

    Ratheesh Ramakrishnan; A S Rajawat


    Suspended sediment transport in the Gulf of Kachchh is simulated utilizing the suspended sediment concentration (SSC) derived from Oceansat OCM imagery, as the initial condition in MIKE-21 Mud Transport model. Optimization of the model mud parameters, like settling velocity and critical shear stress for erosion are realized with respect to the sediment size distribution and the bottom bed materials observed in the Gulf. Simulated SSCs are compared with alternate OCM derived SSC. The results are observed to be impetus where the model is able to generate the spatial dynamics of the sediment concentrations. Sediment dynamics like deposition, erosion and dispersion are explained with the simulated tidal currents and OCM derived sediment concentrations. Tidal range is observed as the important physical factor controlling the deposition and resuspension of sediments within the Gulf. From the simulation studies; maximum residual current velocities, tidal fronts and high turbulent zones are found to characterise the islands and shoals within the Gulf, which results in high sediment concentrations in those regions. Remarkable variability in the bathymetry of the Gulf, different bed materials and varying tidal conditions induces several circulation patterns and turbulence creating the unique suspended sediment concentration pattern in the Gulf.

  1. Dispersion of Sound in Marine Sediments


    Marine Geology , 209, 147-172, (2004). Jiang, Y. and N.R. Chapman. The Impact of Ocean Sound Speed Variability on the Uncertainty of Geoacoustic...1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Dispersion of Sound in Marine Sediments N. Ross...our understanding of the interaction of sound with the ocean bottom is the frequency dependence of sound speed and attenuation in marine sediments

  2. Mechanisms of Methane Release From Lake Sediments

    Shiba, Jacob


    Methane is a powerful greenhouse gas that can be produced in bottom sediments of lakes and reservoirs and released through ebullition and other properties. Many studies have quantified ebullition rates, however, the detailed mechanisms remain incompletely understood. This study was undertaken to better understand, through in situ and laboratory measurements, the mechanisms of gas ebullition from lake sediment. Four sites on Lake Elsinore, CA with different properties were evaluated through th...

  3. Sediment transport monitoring for sustainable hydropower development

    Rüther, Nils; Guerrero, Massimo; Stokseth, Siri


    Due to the increasing demand of CO2 neutral energy not only in Europe but also in World, a relatively large amount of new hydro power plants (HPP) are built. In addition, will existing ones refurbished and renewed in order to run them more cost effective. A huge thread to HPPs is incoming sediments in suspension from the rivers upstream. The sediments settle in the reservoir and reduce the effective head and volume and reduce consequently the life time of the reservoir. In addition are the fine sediments causing severe damages to turbines and infrastructure of a HPP. For estimating the amount of incoming sediments in suspension and therefore planning efficient counter measures, it is essential to monitor the rivers within the catchment of the HPP for suspended sediments. This work is considerably time consuming and requires highly educated personnel and is therefore expensive. Consequently will this study present a method to measure suspended sediment concentrations and their grain size distribution with a dual frequency acoustic Doppler current profiler (ADCP). This method is more cost effective and reliable in comparison to traditional measurement methods. Having more detailed information about the sediments being transported in a river, the hydro power plant can be planned, built, and operated much more efficiently and sustainable. The two horizontal ADCPs are installed at a measurement cross section in the Devoll river in Albania. To verify the new method, the suspended load concentrations will be monitored also in the traditional ways at the same cross sections. It is planned to install turbidity measurement devices included with an automatic sampling devices. It is also planned to use an optical in situ measurement device (LISST SL by Sequoia Inc.) to have detailed information of sediment concentration and grain sizes over the depth.

  4. Sulfide and methane production in sewer sediments.

    Liu, Yiwen; Ni, Bing-Jie; Ganigué, Ramon; Werner, Ursula; Sharma, Keshab R; Yuan, Zhiguo


    Recent studies have demonstrated significant sulfide and methane production by sewer biofilms, particularly in rising mains. Sewer sediments in gravity sewers are also biologically active; however, their contribution to biological transformations in sewers is poorly understood at present. In this study, sediments collected from a gravity sewer were cultivated in a laboratory reactor fed with real wastewater for more than one year to obtain intact sediments. Batch test results show significant sulfide production with an average rate of 9.20 ± 0.39 g S/m(2)·d from the sediments, which is significantly higher than the areal rate of sewer biofilms. In contrast, the average methane production rate is 1.56 ± 0.14 g CH4/m(2)·d at 20 °C, which is comparable to the areal rate of sewer biofilms. These results clearly show that the contributions of sewer sediments to sulfide and methane production cannot be ignored when evaluating sewer emissions. Microsensor and pore water measurements of sulfide, sulfate and methane in the sediments, microbial profiling along the depth of the sediments and mathematical modelling reveal that sulfide production takes place near the sediment surface due to the limited penetration of sulfate. In comparison, methane production occurs in a much deeper zone below the surface likely due to the better penetration of soluble organic carbon. Modelling results illustrate the dependency of sulfide and methane productions on the bulk sulfate and soluble organic carbon concentrations can be well described with half-order kinetics.

  5. Sediment transport in two mediterranean regulated rivers.

    Lobera, G; Batalla, R J; Vericat, D; López-Tarazón, J A; Tena, A


    Mediterranean climate is characterized by highly irregular rainfall patterns with marked differences between wet and dry seasons which lead to highly variable hydrological fluvial regimes. As a result, and in order to ensure water availability and reduce its temporal variability, a high number of large dams were built during the 20th century (more than 3500 located in Mediterranean rivers). Dams modify the flow regime but also interrupt the continuity of sediment transfer along the river network, thereby changing its functioning as an ecosystem. Within this context, the present paper aims to assess the suspended sediment loads and dynamics of two climatically contrasting Mediterranean regulated rivers (i.e. the Ésera and Siurana) during a 2-yr period. Key findings indicate that floods were responsible for 92% of the total suspended sediment load in the River Siurana, while this percentage falls to 70% for the Ésera, indicating the importance of baseflows on sediment transport in this river. This fact is related to the high sediment availability, with the Ésera acting as a non-supply-limited catchment due to the high productivity of the sources (i.e. badlands). In contrast, the Siurana can be considered a supply-limited system due to its low geomorphic activity and reduced sediment availability, with suspended sediment concentration remaining low even for high magnitude flood events. Reservoirs in both rivers reduce sediment load up to 90%, although total runoff is only reduced in the case of the River Ésera. A remarkable fact is the change of the hydrological character of the River Ésera downstream for the dam, shifting from a humid mountainous river regime to a quasi-invariable pattern, whereas the Siurana experiences the opposite effect, changing from a flashy Mediterranean river to a more constant flow regime below the dam.

  6. A Geochronological Approach To Reconstructing Sediment Pathways and Detecting Sediment Recycling In Palaeocene Sediments From The Faroes-shetland Region.

    Carter, A.; Sherlock, S.; Kelley, S.; Pickles, C.; Whitham, A.; Morton, A.

    The production and supply of sediments in the North Atlantic rift systems is likely to reflect a mixture of primary detritus and recycling of sediment from the continental shelf or earlier sediment production events. In the Faroe-Shetland region, the systems that supplied clastic material to basins, during the Late Cretaceous and Palaeocene, are poorly understood and the presence of a westerly sourced submarine fan system remains unproven. The production of sediments may have also been influenced by the arrival of the Iceland mantle plume, creating uplift and leading to reworking of pre-existing shelf sediments. Regional seismic and sedimentological data point to the Shetland Platform area as the most likely source, however, apatite fission track de- nudation chronologies based on outcrop samples from across Scotland and Shetland provide little evidence for accelerated erosion during the Early Tertiary. To better un- derstand the nature of the sediment routing systems and assess the level of sediment recycling we have studied the basin heavy mineral assemblages combined with high resolution detrital Ar-Ar mica and combined zircon fission track and U/Pb dating. Preliminary results show heavy mineral signatures consistent with a Shetland Platform source, with input from Lewisian and Moine/Dalradian basement and recycling from the Permo-Triassic and Devonian/Carboniferous basins. Data from 40Ar/39Ar single grain fusion laserprobe contain distinct age spectra characterised by a Caledonian peak of ~400 Ma, and a wide range of older ages between ~500-1900 Ma. Zircon fission track data are dominated by ages between~300-400 Ma. The dominance of grains with Caledonian ages is not surprising. The Caledonian orogeny was a major source of the sediments which now fill the North Sea, Vøring Basin and Faroes-Shetland Basin. However since the Caledonian was a source for sediments ranging from Devonian to the Paleogene we cannot use the presence of these ages to unambiguously

  7. Assessing sediment contamination using six toxicity assays

    Allen G. BURTON Jr.


    Full Text Available An evaluation of sediment toxicity at Lake Orta, Italy was conducted to compare a toxicity test battery of 6 assays and to evaluate the extent of sediment contamination at various sediment depths. Lake Orta received excessive loadings of copper and ammonia during the 1900’s until a large remediation effort was conducted in 1989-90 using lime addition. Since that time, the lake has shown signs of a steady recovery of biological communities. The study results showed acute toxicity still exists in sediments at a depth of 5 cm and greater. Assays that detected the highest levels of toxicity were two whole sediment exposures (7 d using Hyalella azteca and Ceriodaphnia dubia. The MicrotoxR assay using pore water was the third most sensitive assay. The Thamnotox, Rototox, Microtox solid phase, and Seed Germination-Root Elongation (pore and solid phase assays showed occasional to no toxicity. Based on similarity of responses and assay sensitivity, the two most useful assays were the C. dubia (or H. azteca and Microtox pore water. These assays were effective at describing sediment toxicity in a weight-of-evidence approach.

  8. Fine Sediment Resuspension Dynamics in Moreton Bay

    YOU Zai-jin; YIN Bao-shu


    A comprehensive field study has been undertaken to investigate sediment resuspension dynamics in the Moreton Bay, a large semi-enclosed bay situated in South East Queensland, Australia. An instrumented tripod, which housed three current meters, three OBS sensors and one underwater video camera, was used to collect the field data on tides, currents, waves and suspended sediment concentrations at four sites (Sites 1, 2, 4, and 5) in the bay. Site 1 was located at the main entrance, Site 2 at the central bay in deep water, and Sites 4 and 5 at two small bays in shallow water. The bed sediment was fine sand (d50=0.2 mm) at Site 1, and cohesive sediment at the other three sites. Based on the collected field data, it is found that the dominant driving forces for sediment resuspension are a combination of ocean swell and tidal currents at Site 1, tidal currents at Site 2, and wind-waves at Sites 4 and 5. The critical bed shear stress for cohesive sediment resuspension is determined as 0.079 Pa in unidirectional flow at Site 2, and 0.076 Pa in wave-induced oscillatory flow at Site 5.


    GAO Jian-hua; GAO Shu; CHENG Yan; DONG Li-xian; ZHANG Jing


    Tidal cycle measurements of tidal currents, salinity and water temperature, and suspended sediment conc entra-tions were measured at four stations, together with surveys along two profiles short core collection within the Yalu River estuary.Grain size analysis of the three core sediment showed that: 1) the sediment from B1 to B3 became finer, worse sorting andpositively skewed; 2) the diversification of matter origin became more and more evident from east to west; 3) the sediments overthe region were of the same origin, as indicated by their similar colors and grain sizes. The data indicated that stratiticationoccurred in the flood season, from upstream to downstream, and a salt wedge was formed. The water column was well mixed, butthe longitudinal gradient of the salinity was larger on spring tide. The results also showed that the dominating mechanisnt ofsuspended sediment transport in the Yalu River estuary was T1, T2, T3 and T5. The non-tidal steady advection transport wasrestricted by the net transport of suspended sediment induced by mass Stoked drift directed to landwards, then the net sedimenttransport rate were decreased and the turbidity maxima was also favored to forming and extending.

  10. Water-level fluctuations influence sediment porewater ...

    Reservoirs typically have elevated fish mercury (Hg) levels compared to natural lakes and rivers. A unique feature of reservoirs is water-level management which can result in sediment exposure to the air. The objective of this study is to identify how reservoir water-level fluctuations impact Hg cycling, particularly the formation of the more toxic and bioaccumulative methylmercury (MeHg). Total-Hg (THg), MeHg, stable isotope methylation rates and several ancillary parameters were measured in reservoir sediments (including some in porewater and overlying water) that are seasonally and permanently inundated. The results showed that sediment and porewater MeHg concentrations were over 3-times higher in areas experiencing water-level fluctuations compared to permanently inundated sediments. Analysis of the data suggest that the enhanced breakdown of organic matter in sediments experiencing water-level fluctuations has a two-fold effect on stimulating Hg methylation: 1) it increases the partitioning of inorganic Hg from the solid phase into the porewater phase (lower log Kd values) where it is more bioavailable for methylation; and 2) it increases dissolved organic carbon (DOC) in the porewater which can stimulate the microbial community that can methylate Hg. Sulfate concentrations and cycling were enhanced in the seasonally inundated sediments and may have also contributed to increased MeHg production. Overall, our results suggest that reservoir management a

  11. Sedimentation and sustainability of western American reservoirs

    Graf, William L.; Wohl, Ellen; Sinha, Tushar; Sabo, John L.


    Reservoirs are sustainable only as long as they offer sufficient water storage space to achieve their design objectives. Life expectancy related to sedimentation is a measure of reservoir sustainability. We used data from the Army Corps of Engineers, U.S. Bureau of Reclamation, and U.S. Geological Survey (Reservoir Sedimentation Survey Information System II (RESIS II)) to explore the sustainability of American reservoirs. Sustainability varied by region, with the longest life expectancies in New England and the Tennessee Valley and the shortest in the interior west. In the Missouri and Colorado River basins, sedimentation and rates of loss of reservoir storage capacity were highly variable in time and space. In the Missouri River Basin, the larger reservoirs had the longest life expectancies, with some exceeding 1000 years, while smaller reservoirs in the basin had the shortest life expectancies. In the Colorado River Basin at the site of Glen Canyon Dam, sediment inflow varied with time, declining by half beginning in 1942 because of hydroclimate and upstream geomorphic changes. Because of these changes, the estimated life expectancy of Lake Powell increased from 300 to 700 years. Future surprise changes in sedimentation delivery and reservoir filling area are expected. Even though large western reservoirs were built within a limited period, their demise will not be synchronous because of varying sedimentation rates. Popular literature has incorrectly emphasized the possibility of rapid, synchronous loss of reservoir storage capacity and underestimated the sustainability of the water control infrastructure.

  12. Sediment transport in the nearshore area of Phoenix Island

    Hu, Rijun; Ma, Fang; Wu, Jianzheng; Zhang, Wei; Jiang, Shenghui; Xu, Yongchen; Zhu, Longhai; Wang, Nan; Liu, Aijiang


    Based on the measured data, suspended sediment concentration, surface sediment grain size, current and waves, the sediment transport mechanisms and pathways in the Phoenix Island area were analyzed using methods of flux decomposition and Grain Size Trend Analysis (GSTA). The results show that net suspended sediment is mainly transported by average current, Stokes drift, and gravitational circulation. The transport direction of suspended sediment is varying and basically following the direction of residual tidal currents. Surface sediment transport pathways are primarily parallel to the coastline along with two convergent centers. Waves and longshore currents have a significant influence on sediment transport, but the influence is limited due to a steep and deep underwater bank. Tidal current is the main controlling factor for sediment transport, especially in the deep water area. Neither suspended nor surface sediment is transported towards the southwest. The South Shandong Coastal Current (SSCC) has little effect on sediment transport processes in the nearshore area of Phoenix Island.

  13. Study on utilizing ultrasonic for measurement of sediment concentration distribution

    JiaChunjuan; TangMaoguan


    In the course of sedimentation research, the measurement of sediment concentration and its distribution is very important. At present, most traditional methods are arduous and cannot measure the sediment timely and successively. In order to seek the new measurement method,the paper reports utilizing ultrasonic measurement. When ultrasonic wave spreads along the depth in aqueous suspensions, the scatter intensity of sediment particles changes the depth and sediment concentration. Based on this principle,

  14. Large River Sediment Transport and Deposition: An Annotated Bibliography.


    Keywords: Measurement, navigation, river, sediment, suspended sediment AHEARN, S. C, R. D. MARTIN , AND J. H. WLOSINSKI. 1989. Recommendations for...patterns. Keywords: Climate, discharge, Mississippi River, precipitation, river 130. KEOWN , M. P. 1977. Inventory of sediment sample collection...suspended sediment 131. KEOWN , M. P. 1986. Historic trends in the sediment flow regime of the Mississippi River. U.S. Army Corps of Engineers Waterways

  15. Study of surface mud sediment in an urban environment

    Seleznev, A.; Savastianova, A.; Yarmoshenko, I.


    Surface mud sediment is a media integrating pollution over space and time. Sampling of the mud sediment allows obtaining additional information about environmental state. The results of the study of surface mud sediment in Ekaterinburg city (Russia) are represented in the paper. Particle-size composition of the sediment is primarily represented by dust and fine sand. Study of the sediment allows ranking the territories over pollution degree with heavy metals, identifying technogenic and typomorphic geochemical associations of the elements in environmental compartments.

  16. Sustainably Managing Sediment in Regulated Rivers: Recent Developments

    Kondolf, G. M.; Gao, Y.; Annandale, G. W.; Morris, G. L.; Sumi, T.


    Inspired by the current drought and concerns about maintaining water storage capacity, California State Senate this year passed SB1259, directing the Department of Water Resources to assess the state's reservoirs for sedimentation problems. The need to actively manage sediment in reservoirs is increasingly recognized, as valuable reservoir storage capacity is lost and downstream reaches suffer from sediment starvation, manifesting problems such as channel incision, accelerated erosion of deltas, and loss of gravels important for habitat. With increased dam construction globally, these impacts will be widespread. Despite the opportunities to pass sediment through or around reservoirs (to preserve reservoir capacity and to minimize downstream impacts), these sustainable approaches to managing sediment are not applied in many situations where they would be effective. From a workshop involving international and Chinese experts and review of recent literature, collective global experience in managing reservoir sediments and mitigating downstream sediment starvation suggest that sediment management can be classified as catchment management (to reduce sediment inflow), sediment removal, and sediment routing through or around the reservoir. Sediment routing has the virtues of maintaining sediment flows to downstream reaches, as well as preserving reservoir capacity. Where geometry is favorable, sediment can often be bypassed around the reservoir (avoiding reservoir sedimentation and supplying sediment to downstream reaches) or sluiced through large-capacity outlets after flowing rapidly through the reservoir to avoid sedimentation. In narrow reservoirs with steep longitudinal gradients, sediments accumulated in the reservoir can often be re-suspended and flushed through when the reservoir is drawn down. Turbidity currents can often be 'vented' through the dam, with the advantage that the reservoir need not be drawn down to pass sediment. In planning dams, the expert group

  17. Bunker Hill Sediment Characterization Study

    Neal A. Yancey; Debby F. Bruhn


    The long history of mineral extraction in the Coeur d’Alene Basin has left a legacy of heavy metal laden mine tailings that have accumulated along the Coeur d’Alene River and its tributaries (U.S. Environmental Protection Agency, 2001; Barton, 2002). Silver, lead and zinc were the primary metals of economic interest in the area, but the ores contained other elements that have become environmental hazards including zinc, cadmium, lead, arsenic, nickel, and copper. The metals have contaminated the water and sediments of Lake Coeur d’Alene, and continue to be transported downstream to Spokane Washington via the Spokane River. In 1983, the EPA listed the Bunker Hill Mining and Metallurgical Complex on the National Priorities List. Since that time, many of the most contaminated areas have been stabilized or isolated, however metal contaminants continue to migrate through the basin. Designation as a Superfund site causes significant problems for the economically depressed communities in the area. Identification of primary sources of contamination can help set priorities for cleanup and cleanup options, which can include source removal, water treatment or no action depending on knowledge about the mobility of contaminants relative to water flow. The mobility of contaminant mobility under natural or engineered conditions depends on multiple factors including the physical and chemical state (or speciation) of metals and the range of processes, some of which can be seasonal, that cause mobilization of metals. As a result, it is particularly important to understand metal speciation (National Research Council, 2005) and the link between speciation and the rates of metal migration and the impact of natural or engineered variations in flow, biological activity or water chemistry.

  18. Incorporation of Fine-Grained Sediment Erodibility Measurements into Sediment Transport Modeling, Capitol Lake, Washington

    Stevens, Andrew W.; Gelfenbaum, Guy; Elias, Edwin; Jones, Craig


    Capitol Lake was created in 1951 with the construction of a concrete dam and control gate that prevented salt-water intrusion into the newly formed lake and regulated flow of the Deschutes River into southern Puget Sound. Physical processes associated with the former tidally dominated estuary were altered, and the dam structure itself likely caused an increase in retention of sediment flowing into the lake from the Deschutes River. Several efforts to manage sediment accumulation in the lake, including dredging and the construction of sediment traps upriver, failed to stop the lake from filling with sediment. The Deschutes Estuary Feasibility Study (DEFS) was carried out to evaluate the possibility of removing the dam and restoring estuarine processes as an alternative ongoing lake management. An important component of DEFS was the creation of a hydrodynamic and sediment transport model of the restored Deschutes Estuary. Results from model simulations indicated that estuarine processes would be restored under each of four restoration alternatives, and that over time, the restored estuary would have morphological features similar to the predam estuary. The model also predicted that after dam-removal, a large portion of the sediment eroded from the lake bottom would be deposited near the Port of Olympia and a marina located in lower Budd Inlet seaward of the present dam. The volume of sediment transported downstream was a critical piece of information that managers needed to estimate the total cost of the proposed restoration project. However, the ability of the model to predict the magnitude of sediment transport in general and, in particular, the volume of sediment deposition in the port and marina was limited by a lack of information on the erodibility of fine-grained sediments in Capitol Lake. Cores at several sites throughout Capitol Lake were collected between October 31 and November 1, 2007. The erodibility of sediments in the cores was later determined in the

  19. Sediment exchange between groin fields and main-stream

    Qin, Jie; Zhong, Deyu; Wu, Teng; Wu, Lingli


    Sediment exchange between groin fields and the main-stream influences the transport and distribution of polluted sediment that represents a hazard for rivers and neighboring floodplains. Despite its practical significance, little research has been done on the sediment exchange process itself, and existing studies used to estimate the sediment exchange by morphological change. The sediment exchange process, however, differs from morphological variation and includes two behaviors: the entrance of main-stream sediment into groin fields and the movement of groin field sediment out of groin fields. Therefore, this study aims at examining this exchange process and exploring the mechanisms of different exchange phenomena. Experiments were conducted in a mobile-bed laboratory flume by using a novel experimental method that successfully separates the movement of groin fields sediment from that of main-stream sediment. In addition to traditional measurements, such as measurements of morphological changes, surface flow velocities, and bed-form propagation, the deposition of main-stream sediment in groin fields is measured in detail. The results demonstrate that morphological change cannot reflect the sediment exchange process. The deposition of main-stream sediment in groin fields is determined by the dynamics of sediment movement, in which bedload- and suspended-sediment-dominated processes exhibit different deposition patterns. The movement of groin field sediment out of groin fields is determined mainly by local scouring around groins.

  20. Management responses to pulses of bedload sediment in rivers

    Sims, Alexander J.; Rutherfurd, Ian D.


    Rivers can experience sudden pulses of sediment, from human and natural erosion processes, that can accumulate in the bed. Abundant studies have examined the sources and dynamics of sediment pulses, and problems caused by these pulses, particularly flooding, avulsions, and habitat simplification. Much less has been written about what managers can do about sediment pulses, and that is the purpose of this review. The first option for managers is to do nothing, and this decision can be informed by many case studies and by theory on the propagation and character of sediment pulses (their diffusion, translation, and celerity). Doing nothing should be informed by the secondary effects of sediment pulses on channels including; widening, avulsions, and tributary interactions. If managers decide that something needs to be done about the sediment, they have four options: (1) reducing the sediment supply at source, (2) trapping sediment in the channel (3) accelerating sediment transport through a reach, and, (4) directly extracting sediment. The most common of these actions is undoubtedly to reduce the supply at source, but there are few examples of the consequences of this for sediment pulses. There are even fewer examples of trapping, accelerating and extracting sediment. All of these options have great potential for managing sediment pulses, however, they also have the potential to trigger incision of tributaries and of the channel behind the passing sediment wave. Overall, the literature equips managers to understand the dynamics of sediment pulses, but it does not yet equip them to confidently manage these geomorphic events.

  1. Effect of suspended sediment grain size on channel sedimentation in the lower Yellow River and some implications

    XU JiongXin; HU ChunHong; CHEN JianGuo


    Based on the data of suspended sediment transport and channel sedimentation in various grain size fractions in the period of 1962-1985,the relationship between channel sedimentation in the lower Yellow River and sediment input has been plotted with respect to each grain size fraction.Several fill-scour thresholds in sediment input have been identified from these graphs.It was found that the fill-scour threshold in sediment input decreases with the increase in fraction grain size.The correlation coefficient between channel sedimentation and sediment input becomes larger with the increasing fraction grain size,indicating that channel sedimentation depends more on coarser grain size fractions than on smaller ones.The fraction channel sedimentation induced by unit change of fraction sediment input increases with grain size.Of the input of sediment larger than 0.025 mm,43.73% was deposited on the channel,and for inputs of sediments larger than 0.05 mm and larger than 0.10 mm,76.61% and 97.68% were deposited on the channel,respectively.Thus,for reduction of each ton of sediment larger than 0.10 mm from the drainage basin,the resultant reduction in channel sedimentation in the lower Yellow River would be 1.275 times that for the sediment larger than 0.10 mm,and 2.234 times that for the sediment larger than 0.025 mm.Therefore,if the erosion and sediment control measures are enforced in the areas where >0.05 or >0.10 mm sediment is produced,then the best beneficial will be achieved in reducing sedimentation in the lower Yellow River.

  2. Effect of suspended sediment grain size on channel sedimentation in the lower Yellow River and some implications


    Based on the data of suspended sediment transport and channel sedimentation in various grain size fractions in the period of 1962―1985, the relationship between channel sedimentation in the lower Yellow River and sediment input has been plotted with respect to each grain size fraction. Several fill-scour thresholds in sediment input have been identified from these graphs. It was found that the fill-scour threshold in sediment input decreases with the increase in fraction grain size. The correlation coefficient between channel sedimentation and sediment input becomes larger with the increasing fraction grain size, indicating that channel sedimentation depends more on coarser grain size fractions than on smaller ones. The fraction channel sedimentation induced by unit change of fraction sediment input increases with grain size. Of the input of sediment larger than 0.025 mm, 43.73% was deposited on the channel, and for inputs of sediments larger than 0.05 mm and larger than 0.10 mm, 76.61% and 97.68% were deposited on the channel, respectively. Thus, for reduction of each ton of sediment larger than 0.10 mm from the drainage basin, the resultant reduction in channel sedimentation in the lower Yellow River would be 1.275 times that for the sediment larger than 0.10 mm, and 2.234 times that for the sediment larger than 0.025 mm. Therefore, if the erosion and sediment control measures are enforced in the areas where >0.05 or >0.10 mm sediment is produced, then the best beneficial will be achieved in reducing sedimentation in the lower Yellow River.

  3. Sediment Types - SEDIMENT_INVENTORY_EPA_IN: National Sediment Inventory (NSI) and Data Summaries in Indiana, Derived from EPA BASINS 3 (United States Environmental Protection Agency, Point Shapefile)

    NSGIC GIS Inventory (aka Ramona) — SEDIMENT_INVENTORY_EPA_IN is a point shapefile from the National Sediment Inventory developed by the USEPA BASINS 3.0 program and edited by Bernardin, Lochmueller...

  4. Magnetic seeding sedimentation (MSS) of coal slimes

    Wu, Xiqing; Yue, Tao; Dai, Liang


    Magnetic seeding sedimentation (MSS), i.e. adding magnetic seeds and pre-magnetization for sedimentation, is a technique especially for sedimentation of fine slimes, improving the sedimentation performance by introducing the magnetic interactions between particles in a suspension and enlarging the apparent size of the fine particles. The fine coal slimes with a size of 66.68%-38μm were investigated by the MSS. Sedimentation tests were conducted, and some measurements, such as laser size analysis, magnetic susceptibility by vibrating sample magnetometer (VSM), were also applied in order to probe the mechanism of the MSS. Based on the tests, measurements and calculations it was demonstrated that the sedimentation of coal slimes increased with the additions of the magnetic seeds, and in the presence of the polyacrylamide, and also there appeared a relatively large apparent size of slimes after additions of magnetic seeds and/or polyacrylamide. So, the reason for the influence of MSS lies in fact that the presence of the polyacrylamide intensified the adsorption of magnetic seeds on the coal particles and the coverage of the magnetic seeds on the coal surface from 0.2% wt. to1.3% wt., resulting in increased magnetic susceptibility of coal particles from 9.13×10-9m3/kg to 22.17×10-9m3/kg and thus a low magnetic field strength of pre-magnetization needed for the magnetic agglomeration to happen among the coal particles (the threshold of magnetic field strength for agglomeration) from 602mT to 24mT prior to proper sedimentation.

  5. Identifying cause in sediment assessments : bioavailability and the sediment quality triad

    Borgmann, U.; Norwood, W.P.; Reynoldson, T.B.; Rosa, F. [Environment Canada, Burlington, ON (Canada). National Water Research Inst.


    A study was conducted to examine the biological impacts of metals in sediments found in the Sudbury area lakes. This study included the analysis of the standard Sediment Quality Triad components from a 1996 study. Metal bioavailability or bioaccumulation in Hyalella azteca was also measured under laboratory conditions with fresh sediments collected in 1998 to determine the adequacy of the Sediment Quality Triad. The objective of the study was to determine first of all if contaminants are getting into the system, and if so, whether they are bioavailable. The second objective was to see if there is a measurable response and to determine what is causing the response. The application of the Sediment Quality Triad approach to non-pH-stressed area lakes showed increased levels of cadmium, cobalt, copper and nickel, with decreased amounts of benthic invertebrates and significant sediment toxicity to amphipods and mayflies. The cause of sediment toxicity was determined by comparing metal bioaccumulation with critical body concentrations previously shown to cause toxicity. Nickel was the only metal that was clearly identified as contributing to toxicity in chronic tests with Hyalella exposed to Sudbury area sediments. 31 refs., 3 tabs., 6 figs.

  6. Reference material for radionuclides in sediment IAEA-384 (Fangataufa Lagoon sediment)

    Povinec, P.P.; Pham, M.K.; Sanchez-Cabeza, J.A.;


    A reference material designed for the determination of anthropogenic and natural radionuclides in sediment, IAEA-384 (Fangataufa Lagoon sediment), is described and the results of certification are presented. The material has been certified for 8 radionuclides (K-40, Co-60, Eu-155, Th-230, U-238, ...

  7. Sediment characteristics and wind-induced sediment dynamics in shallow Lake Markermeer, the Netherlands

    Kelderman, P.; Ang'weya, R.O.; De Rozari, P.; Vijverberg, T.


    In 2007/08, a study was undertaken on the sediment dynamics in shallow Lake Markermeer (the Netherlands). Firstly, sediment characteristics were determined at 49 sites in the lake. Parameters such as median grain size and loss on ignition showed a spatial as well as water depth related pattern, indi

  8. Sediment boron and its relation to sediment properties in a tropical estuary

    Shirodkar, P.V.; Dalal, V.N.K.

    Boron in the sediments of Mandovi estuary varied from 8.0 to 258.0 ppm with an average of 118 ppm. It showed an inverse relation to the texture of sediments and was found to be concentrated in silt and clay fraction with generally decreasing...

  9. Activities and geochronology of (137)Cs in lake sediments resulting from sediment resuspension.

    Matisoff, Gerald


    In lakes with a large surface area to watershed ratio (137)Cs delivery is primarily by direct atmospheric fallout to the lake surface, where its activity in the sediments has been used to estimate the exposure to organisms and sediment mass deposition rates. Comparison of (137)Cs in the historical atmospheric fallout record with (137)Cs activity profiles in sediment cores reveals that although the general features of a maxima in the fallout deposition can be matched to activity peaks in the core, the general shape of the (137)Cs profile is not an exact replica of the fallout history. Instead, the sediment reflects post-depositional processes such as resuspension, bioturbation, partitioning of (137)Cs between the sediment solids and the pore fluids, and molecular diffusion of (137)Cs through the pore fluids. Presented here is a model that couples these processes to a system time averaging (STA) model that accounts for the time history of (137)Cs fallout and the particle residence time in the water column or in the 'active' surface sediment subject to resuspension. Sediment profiles are examined by comparing reasonable ranges of each of the coefficients of each of these major processes and by applying the model to cores collected from two large, shallow lakes, Lake Erie (USA/Canada) and Lake Winnipeg (Canada). The results indicate that the STA model with molecular diffusion and sediment resuspension best describes the data from these large, shallow lakes. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Reservoir Sedimentation and Upstream Sediment Sources: Perspectives and Future Research Needs on Streambank and Gully Erosion

    Fox, G. A.; Sheshukov, A.; Cruse, R.; Kolar, R. L.; Guertault, L.; Gesch, K. R.; Dutnell, R. C.


    The future reliance on water supply and flood control reservoirs across the globe will continue to expand, especially under a variable climate. As the inventory of new potential dam sites is shrinking, construction of additional reservoirs is less likely compared to simultaneous flow and sediment management in existing reservoirs. One aspect of this sediment management is related to the control of upstream sediment sources. However, key research questions remain regarding upstream sediment loading rates. Highlighted in this article are research needs relative to measuring and predicting sediment transport rates and loading due to streambank and gully erosion within a watershed. For example, additional instream sediment transport and reservoir sedimentation rate measurements are needed across a range of watershed conditions, reservoir sizes, and geographical locations. More research is needed to understand the intricate linkage between upland practices and instream response. A need still exists to clarify the benefit of restoration or stabilization of a small reach within a channel system or maturing gully on total watershed sediment load. We need to better understand the intricate interactions between hydrological and erosion processes to improve prediction, location, and timing of streambank erosion and failure and gully formation. Also, improved process-based measurement and prediction techniques are needed that balance data requirements regarding cohesive soil erodibility and stability as compared to simpler topographic indices for gullies or stream classification systems. Such techniques will allow the research community to address the benefit of various conservation and/or stabilization practices at targeted locations within watersheds.

  11. Accumulation and effects of sediment-associated silver nanoparticles to sediment-dwelling invertebrates

    Ramskov, Tina; Forbes, Valery E; Gilliland, Douglas;


    are in high demand. Here, we examine the effects of exposure to sediment mixed with either aqueous Ag (administered as AgNO3) or Ag NPs (13 nm, citrate-capped) at a nominal exposure concentration of 100 μg Ag/g dry weight sediment on four benthic invertebrates: two clones of the gastropod Potamopyrgus...

  12. Sediment contributions from floodplains and legacy sediments to Piedmont streams of Baltimore County, Maryland

    Donovan, Mitchell; Miller, Andrew; Baker, Matthew; Gellis, Allen


    Disparity between watershed erosion rates and downstream sediment delivery has remained an important theme in geomorphology for many decades, with the role of floodplains in sediment storage as a common focus. In the Piedmont Province of the eastern USA, upland deforestation and agricultural land use following European settlement led to accumulation of thick packages of overbank sediment in valley bottoms, commonly referred to as legacy deposits. Previous authors have argued that legacy deposits represent a potentially important source of modern sediment loads following remobilization by lateral migration and progressive channel widening. This paper seeks to quantify (1) rates of sediment remobilization from Baltimore County floodplains by channel migration and bank erosion, (2) proportions of streambank sediment derived from legacy deposits, and (3) potential contribution of net streambank erosion and legacy sediments to downstream sediment yield within the Mid-Atlantic Piedmont. We calculated measurable gross erosion and deposition rates within the fluvial corridor along 40 valley segments from 18 watersheds with drainage areas between 0.18 and 155 km2 in Baltimore County, Maryland. We compared stream channel and floodplain morphology from lidar-based digital elevation data collected in 2005 with channel positions recorded on 1:2400 scale topographic maps from 1959-1961 in order to quantify 44-46 years of channel change. Sediment bulk density and particle size distributions were characterized from streambank and channel deposit samples and used for volume to mass conversions and for comparison with other sediment sources. Average annual lateral migration rates ranged from 0.04 to 0.19 m/y, which represented an annual migration of 2.5% (0.9-4.4%) channel width across all study segments, suggesting that channel dimensions may be used as reasonable predictors of bank erosion rates. Gross bank erosion rates varied from 43 to 310 Mg/km/y (median = 114) and were

  13. Assessment of Total Suspended Sediment and Bed Sediment Grains in Upstream Areas of Lata Berangin, Terengganu

    Noorjima Abd Wahab


    Full Text Available The amount of suspended sediment yield and the size of sediment grains an indicator of hydrological cycle, especially in the river. The sediment transportation process is one of the measurements of water resources management. Equilibrium of the river depends on the flow rate of water and by several factors such as frequency of rainfall, climate changes and land use activities that changes then effected to the river flow. Sedimentation problems occur in reservoirs, rivers, lakes, flood plains and offshore. This study was carried out in the upstream area, Lata Berangin, Hulu Keruak, Besut, Terengganu. This study was implemented to prove the sedimentation problem, especially the formation of total suspended sediment (TSS and the bed sediment grain size. There are three important parameters were quantified in this study such as the distribution of sediment grain size (phi, TSS (mg/L and the river discharge values (Q (m³/s. The technique of analysis of primary data obtained which determine the bed sediment grain size according with the procedure of Gerald and Kenneth and the phi (ϕ value in this study using the scale Udden-Wentworth that included median, mean, standard deviation, skewness, kurtosis and the Gravimetric Method used to analyze the concentration TSS is the Gravimetric Method. From the result, the highest TSS up to 6.0 mg/L which is categorized under the class I, based on the National Water Quality Standard. Overall, the estimated daily-suspended sediment load values up to 1.1649 tonne/day at Station 2.  Then, from the statistics for the median, mean, standard deviation, skewness and kurtosis showed that the size of sediment falls between phi -0.30φ to phi -1.00 φ which classified as very coarse and the majority of the sediment texture and a very leptokurtic, leptokurtic texture showed sedimentation production is not so high. Overall, the sedimentation problem in Lata Berangin, Hulu Keruak still in stable level. Most of this upstream

  14. On extracting sediment transport information from measurements of luminescence in river sediment

    Gray, Harrison J; Mahan, Shannon A; McGuire, Chris; Rhodes, Edward J


    Accurately quantifying sediment transport rates in rivers remains an important goal for geomorphologists, hydraulic engineers, and environmental scientists. However, current techniques for measuring transport rates are laborious, and formulae to predict transport are notoriously inaccurate. Here, we attempt to estimate sediment transport rates using luminescence, a property of common sedimentary minerals that is used by the geoscience community for geochronology. This method is advantageous because of the ease of measurement on ubiquitous quartz and feldspar sand. We develop a model based on conservation of energy and sediment mass to explain the patterns of luminescence in river channel sediment from a first-principles perspective. We show that the model can accurately reproduce the luminescence observed in previously published field measurements from two rivers with very different sediment transport styles. The parameters from the model can then be used to estimate the time-averaged virtual velocity, charac...

  15. Sediment Burial Intolerance of Marine Macroinvertebrates.

    Vicki J Hendrick

    Full Text Available The marine environment contains suspended particulate matter which originates from natural and anthropogenic sources. Settlement of this material can leave benthic organisms susceptible to smothering, especially if burial is sudden i.e. following storms or activities such as dredging. Their survival will depend on their tolerance to, and their ability to escape from burial. Here we present data from a multi-factorial experiment measuring burial responses incorporating duration, sediment fraction and depth. Six macroinvertebrates commonly found in sediment rich environments were selected for their commercial and/or conservation importance. Assessments revealed that the brittle star (Ophiura ophiura, the queen scallop (Aequipecten opercularis and the sea squirt (Ciona intestinalis were all highly intolerant to burial whilst the green urchin (Psammichinus miliaris and the anemone (Sagartiogeton laceratus, showed intermediate and low intolerance respectively, to burial. The least intolerant, with very high survival was the Ross worm (Sabellaria spinulosa. With the exception of C. intestinalis, increasing duration and depth of burial with finer sediment fractions resulted in increased mortality for all species assessed. For C. intestinalis depth of burial and sediment fraction were found to be inconsequential since there was complete mortality of all specimens buried for more than one day. When burial emergence was assessed O. ophiura emerged most frequently, followed by P. miliaris. The former emerged most frequently from the medium and fine sediments whereas P. miliaris emerged more frequently from coarse sediment. Both A. opercularis and S. laceratus showed similar emergence responses over time, with A. opercularis emerging more frequently under coarse sediments. The frequency of emergence of S. laceratus increased with progressively finer sediment and C. intestinalis did not emerge from burial irrespective of sediment fraction or depth. Finally

  16. Micro-facies of Dead Sea sediments

    Neugebauer, Ina; Schwab, Markus J.; Brauer, Achim; Frank, Ute; Dulski, Peter; Kitagawa, Hiroyuki; Enzel, Yehouda; Waldmann, Nicolas; Ariztegui, Daniel; Drilling Party, Dsddp


    Lacustrine sediments infilling the Dead Sea basin (DSB) provide a rare opportunity to trace changing climates in the eastern Mediterranean-Levant region throughout the Pleistocene and Holocene. In this context, high-resolution investigation of changes in sediment micro- facies allow deciphering short-term climatic fluctuations and changing environmental conditions in the Levant. The Dead Sea is a terminal lake with one of the largest drainage areas in the Levant, located in the Mediterranean climate zone and influenced also by the Saharo-Arabian deserts. Due to drastic climatic changes in this region, an exceptionally large variety of lacustrine sediments has been deposited in the DSB. These sediments, partially the results of changing lake levels, primarily represent changes in precipitation (e.g. Enzel et al., 2008). Evaporites (halite and gypsum) reflect dry climatic conditions during interglacials, while alternated aragonite-detritus (AAD) is deposited during glacial lake level high-stands. Here we present the first micro-facies inventory of a ~450 m long sediment profile from the deepest part of the northern DSB (ICDP site 5017-1, ~300 m water depth). The sediment record comprises the last two glacial-interglacial cycles, with mainly AAD facies in the upper part of the Amora Formation (penultimate glacial) and the last glacial Lisan Formation. The last interglacial Samra and the Holocene Zeelim Formations are predominantly characterized by thick bedded halite deposits, intercalated by partly laminated detrital marl sequences. Representative sections of the different facies types have been analyzed for micro-facies on petrographic thin sections, supported by high-resolution µXRF element scanning, magnetic susceptibility measurements and microscopic fluorescence analysis. Furthermore, Holocene sediments retrieved at the deep basin core site have been compared to their shallow-water counterpart at the western margin of the lake (core DSEn; Migowski et al., 2004

  17. Resuspension of sediment, a new approach for remediation of contaminated sediment.

    Pourabadehei, Mehdi; Mulligan, Catherine N


    Natural events and anthropogenic activities are the reasons of undesirable resuspension of contaminated sediments in aquatic environment. Uncontrolled resuspension could remobilize weakly bound heavy metals into overlying water and pose a potential risk to aquatic ecosystem. Shallow harbours, with contaminated sediments are subjected to the risk of uncontrolled resuspension. Remediation of sediments in these areas cannot be performed by conventional in situ methods (e.g. capping with or without reactive amendment). Ex situ remediation also requires dredging of sediment, which could increase the risk of spreading contaminants. Alternatively, the resuspension technique was introduced to address these issues. The concept of the resuspension method is that finer sediments have a greater tendency to adsorb the contamination. Therefore, finer sediments, believed carry more concentration of contaminants, were targeted for removal from aquatic environment by a suspension mechanism in a confined water column. The objective of this study was to evaluate the feasibility of the resuspension technique as a new approach for remediation of contaminated sediment and a viable option to reduce the risk of remobilization of contaminants in harbours due to an undesirable resuspension event. Unlike the common in situ techniques, the resuspension method could successfully reduce the total concentration of contaminants in almost all samples below the probable effect level (PEL) with no significant change in the quality of overlying water. The results indicated that removal efficiency could be drastically enhanced for metals in sediment with a higher enrichment factor. Moreover, availability of metals (e.g. Cd and Pb) with a high concentration in labile fractions was higher in finer sediments with a high enrichment factor. Consequently, removal of contaminants from sediment through the resuspension method could reduce the risk of mobility and availability of metals under changing

  18. Identifying fine sediment sources to alleviate flood risk caused by fine sediments through catchment connectivity analysis

    Twohig, Sarah; Pattison, Ian; Sander, Graham


    Fine sediment poses a significant threat to UK river systems in terms of vegetation, aquatic habitats and morphology. Deposition of fine sediment onto the river bed reduces channel capacity resulting in decreased volume to contain high flow events. Once the in channel problem has been identified managers are under pressure to sustainably mitigate flood risk. With climate change and land use adaptations increasing future pressures on river catchments it is important to consider the connectivity of fine sediment throughout the river catchment and its influence on channel capacity, particularly in systems experiencing long term aggradation. Fine sediment erosion is a continuing concern in the River Eye, Leicestershire. The predominately rural catchment has a history of flooding within the town of Melton Mowbray. Fine sediment from agricultural fields has been identified as a major contributor of sediment delivery into the channel. Current mitigation measures are not sustainable or successful in preventing the continuum of sediment throughout the catchment. Identifying the potential sources and connections of fine sediment would provide insight into targeted catchment management. 'Sensitive Catchment Integrated Modelling Analysis Platforms' (SCIMAP) is a tool often used by UK catchment managers to identify potential sources and routes of sediment within a catchment. SCIMAP is a risk based model that combines hydrological (rainfall) and geomorphic controls (slope, land cover) to identify the risk of fine sediment being transported from source into the channel. A desktop version of SCIMAP was run for the River Eye at a catchment scale using 5m terrain, rainfall and land cover data. A series of SCIMAP model runs were conducted changing individual parameters to determine the sensitivity of the model. Climate Change prediction data for the catchment was used to identify potential areas of future connectivity and erosion risk for catchment managers. The results have been

  19. Sedimentation rate and {sup 210}Pb sediment dating at Apipucos reservoir, Recife, Brazil

    Figueiredo, Marcela D.C. de; Silva, Danubia B. da; Cunha, Manuela S. da; Rodrigues, Kelia R.G.; Pedroza, Eryka H.; Melo, Roberto T. de; Oliveira, Aristides; Hazin, Clovis A.; Souza, Vivianne L.B. de, E-mail:, E-mail:, E-mail: [Centro Regional de Ciencias Nucleares (CRCN-NE/CNEN-PE), Recife, PE (Brazil)


    The Apipucos Reservoir is located in Recife, State of Pernambuco, and, several districts of the metropolitan area use this reservoir to dispose waste and sewage. Dating sediments uses {sup 210}Pb from the atmosphere which is formed as a result of {sup 222}Rn emanation from the soil. Atmospheric lead, carried by rain, is called non-supported {sup 21}'0Pb, to differentiate it from the one contained in the sediment, in balance with the {sup 226}Ra. The model chosen for dating sediments depends on certain conditions: in an environment where the amount of sediment influx can vary, the constant rate of supply model is adopted. On the other hand, in environments where the sedimentation rate is constant and the sediment can be considered to have a constant initial concentration of unsupported {sup 210}Pb and the (CIC) model is applied. A 70-cm long, 5-cm internal-diameter wide core was collected for sediment dating. Each core was sliced, into 5 or 10 cm intervals. Samples were dried at 105 deg C, and about 5 g dry material from each sample was dissolved with acids. The {sup 210}Pb and {sup 226}Ra contents were separated and determined by beta and alpha counting by using a gas-flow proportional counter. Sediment ages were calculated by the two models, and for the second and fourth sampling points, both models could be used. The results showed an increase in sedimentation rate over the last 50 - 60 years. We can conclude that the top sediment layer is dated from 30 years ago. We can also conclude that the CRS is the best applicable model to use in this area. (author)

  20. Chronology of Lake El'gygytgyn sediments

    N. R. Nowaczyk


    Full Text Available A 318 m long sedimentary profile drilled by the International Continental Scientific Drilling Program (ICDP at Site 5011-1 in Lake El'gygytgyn, Far East Russian Arctic, has been analysed for its sedimentologic response to global climate modes by chrono-stratigraphic methods. The 12 km wide lake is sited in an 18 km large crater that was created by the impact of a meteorite 3.58 Ma ago. Since then sediments have been continuously deposited. For establishing their chronology, major reversals of the Earth's magnetic field provided initial tie points for the age model, confirming that the impact occurred in the earliest Gauss chron. Various stratigraphic parameters, reflecting redox conditions at the lake floor and climatic conditions in the catchment were tuned synchronously to Northern Hemisphere insolation variations and the marine oxygen isotope stack, respectively. Thus, a robust age model comprising more than 600 tie points could be defined. It could be shown that deposition of sediments in Lake El'gygytgyn occurred in concert with global climatic cycles. The upper ~160 m of sediments represent the past 3.3 Ma, equivalent to sedimentation rates of 4 to 5 cm ka−1, whereas the lower 160 m represent just the first 0.3 Ma after the impact, equivalent to sedimentation rates in the order of 45 cm ka−1.

  1. Assessment of sediment monitoring at LLNL

    Gallegos, G.


    Three separate sediment monitoring studies have been conducted at the Lawrence Livermore National Laboratory (LLNL) Livermore site. ``Sediment`` is defined here as finely divided solid materials that have settled out of an active stream or standing water. Sediment samples from all three studies were analyzed for a number of contaminants including {sup 239}pu, {sup 3}H, gamma emitting radionuclides, heavy metals, volatile organic compounds and pesticides. The analytical results for metals and organic compounds were compared to limits for disposal of hazardous waste, the tritium values were compared to drinking water standards, and the other radionuclides were compared to soils monitoring values. No tritium values were above (or were greater than 55% of drinking water standards), and no other radionuclides in sediments were above soils values. In all of the studies, only two metals, lead and mercury, and six organic compounds, benzo(a)-pyrene, Dieldrin, p,p{prime}-DDT, Endosulfan L endosulfan sulfate, and vinyl chloride were above waste disposal limits. Three of the high contaminants, mercury, benzo(a)-pyrene, and vinyl chloride, were found at one sampling location; the others were not connected by drainage channels or physical proximity to each other. Overall, a total of 247 samples were analyzed, and the sporadic identification of materials over disposal limits demonstrates that there is negligible contamination of sediment.

  2. Sediment isotope tomography (SIT) model version 1

    Carroll, J.; Abraham, J.D.


    Geochronology using {sup 210}Pb is the principal method used to quantify sediment accumulation in rapidly depositing aquatic environments such as lakes, estuaries, continental shelves, and submarine canyons. This method is based on the radioactive decay of {sup 210}Pb with depth in a column of sediment. The decay through time of {sup 210}Pb P(t) is governed by the exponential law P(t) = P{sub 0} exp( -{lambda}t) where P{sub 0} is the surficial concentration at time t = 0, and {lambda} is the decay constant (3.114 {sm_bullet} 10{sup -2} year [yr]{sup -1} for {sup 210}Pb). If the sedimentation rate is constant, then elapsed time t is connected to burial depth x, through x = Vt where V is the sedimentation velocity. Accordingly, P(x) = P{sub 0}exp( -{lambda}x/V). The sedimentation velocity is obtained from an exponential fit to the measured {sup 210}Pb data P(x), with depth x.

  3. Radionuclide content of Las Vegas wash sediments

    Rudin, M.J.; Meyers, A.M.; Johnson, W.H. [Univ. of Nevada, Las Vegas, NV (United States)


    The Las Vegas Wash is an excavated waterway channel which drains all surface water and effluent discharge from sewage-treatment facilities from the greater Las Vegas Metropolitan Area to Lake Mead. Runoff and erosion processes are expected to transport man-made radioactivity that was deposited over the past several decades in the Las Vegas Valley. Additionally, radionuclides disposed of via the city`s sanitary system are expected to accumulate in the Wash sediments. Fine and coarse sediment samples were collected at 100 m intervals and analyzed to determine the distribution of alpha- and gamma-emitting radionuclides in the lower 5,500 in of the Las Vegas Wash. Results indicate little accumulation of long-lived fission products in upstream Wash sediments. However, trace amounts of fission products measured in downstream sediments suggest the resuspension and transport of radioactive particulate matter within the Wash. Levels of naturally-occurring radionuclides found in Wash sediments were found to be consistent with levels typically found in southeast Nevada soils.

  4. Ubiquity of microplastics in coastal seafloor sediments.

    Ling, S D; Sinclair, M; Levi, C J; Reeves, S E; Edgar, G J


    Microplastic pollutants occur in marine environments globally, however estimates of seafloor concentrations are rare. Here we apply a novel method to quantify size-graded (0.038-4.0mm diam.) concentrations of plastics in marine sediments from 42 coastal and estuarine sites spanning pollution gradients across south-eastern Australia. Acid digestion/density separation revealed 9552 individual microplastics from 2.84l of sediment across all samples; equating to a regional average of 3.4 microplastics·ml(-1) sediment. Microplastics occurred as filaments (84% of total) and particle forms (16% of total). Positive correlations between microplastic filaments and wave exposure, and microplastic particles with finer sediments, indicate hydrological/sediment-matrix properties are important for deposition/retention. Contrary to expectations, positive relationships were not evident between microplastics and other pollutants (heavy metals/sewage), nor were negative relationships with neighbouring reef biota detected. Rather, microplastics were ubiquitous across sampling sites. Positive associations with some faunal-elements (i.e. invertebrate species richness) nevertheless suggest high potential for microplastic ingestion. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Sedimentation coefficient distributions of large particles.

    Schuck, Peter


    The spatial and temporal evolution of concentration boundaries in sedimentation velocity analytical ultracentrifugation reports on the size distribution of particles with high hydrodynamic resolution. For large particles such as large protein complexes, fibrils, viral particles, or nanoparticles, sedimentation conditions usually allow migration from diffusion to be neglected relative to sedimentation. In this case, the shape of the sedimentation boundaries of polydisperse mixtures relates directly to the underlying size-distributions. Integral and derivative methods for calculating sedimentation coefficient distributions g*(s) of large particles from experimental boundary profiles have been developed previously, and are recapitulated here in a common theoretical framework. This leads to a previously unrecognized relationship between g*(s) and the time-derivative of concentration profiles. Of closed analytical form, it is analogous to the well-known Bridgman relationship for the radial derivative. It provides a quantitative description of the effect of substituting the time-derivative by scan differences with finite time intervals, which appears as a skewed box average of the true distribution. This helps to theoretically clarify the differences between results from time-derivative method and the approach of directly fitting the integral definition of g*(s) to the entirety of experimental boundary data.

  6. Reach Scale Sediment Balance of Goodwin Creek Watershed, Mississippi

    Ran, L.; Garcia, T.; Ye, S.; Harman, C. J.; Hassan, M. A.; Simon, A.


    Several reaches of Goodwin Creek, an experimental watershed within the Mississippi river basin, were analyzed for the period 1977-2007 in terms of long-term trends in sediment gain and loss in each reach, the relation of input and output to within-reach sediment fluxes, and the impacts of land use and bank erosion on reach sediment dynamics. Over the period 1977-2007, degradational and aggradational reaches were identified indicating slight vertical adjustment along the mainstream. Lateral adjustment was the main response of the channel to changes in flow and sediment regimes. Event-based sediment load was estimated using suspended concentration data, bedload transport rate, and changes in cross-sectional data. Bank erosion was estimated using cross-sectional data and models. The spatial and temporal patterns of within-reach sediment dynamics correspond closely with river morphology and also reflect basin conditions over the last three decades; thus they are conditioned by coeval trends in climate, hydrology, and land use. The sediment exchange within the mainstream was calculated by the development of reach sediment balances that reveal complex spatial and temporal patterns of sediment dynamics. Sediment load during the rising limb of the hydrograph was slightly higher than those estimated for the falling limb indicating the relative importance of sediment supply on reach sediment dynamic in the basin. Cumulative plots of sediment exchange reveal that major changes in within reach sediment storage are associated with large floods or major inputs from bank erosion.

  7. Mathematical simulation of sediment and radionuclide transport in estuaries

    Onishi, Y.; Trent, D.S.


    The finite element model LFESCOT (Flow, Energy, Salinity, Sediment and Contaminant Transport Model) was synthesized under this study to simulate radionuclide transport in estuaries to obtain accurate radionuclide distributions which are affected by these factors: time variance, three-dimensional flow, temperature, salinity, and sediments. Because sediment transport and radionuclide adsorption/desorption depend strongly on sizes or types of sediments, FLESCOT simulates sediment and a sediment-sorbed radionuclide for the total of three sediment-size fractions (or sediment types) of both cohesive and noncohesive sediments. It also calculates changes of estuarine bed conditions, including bed elevation changes due to sediment erosion/deposition, and three-dimensional distributions of three bed sediment sizes and sediment-sorbed radionuclides within the bed. Although the model was synthesized for radionuclide transport, it is general enough to also handle other contaminants such as heavy metals, pesticides, or toxic chemicals. The model was checked for its capability for flow, water surface elevation change, salinity, sediment and radionuclide transport under various simple conditions first, confirming the general validity of the model's computational schemes. These tests also revealed that FLESCOT can use large aspect ratios of computational cells, which are necessary in handling long estuarine study areas. After these simple tests, FLESCOT was applied to the Hudson River estuary between Chelsea and the mouth of the river to examine how well the model can predict radionuclide transport through simulating tidally influenced three-dimensional flow, salinity, sediment and radionuclide movements with their interactions.

  8. Experimental investigation of the effect of sediment transport patterns on the adsorption of cadmium ions onto sediment particles

    HUANG Sui-liang; NG Chiu-on; GUO Qi-zhong


    The mechanism of flow turbulence, sediment supply conditions, and sediment transport patterns that affect the adsorption of cadmium ions onto sediment particles in natural waters are experimentally simulated and studied in this study both in batch reactors and in a turbulence simulation tank. By changing the agitation conditions, the sediment transport in batch reactors can be categorized into bottom sediment-dominated sediment and suspended sediment-dominated sediment. It is found that the adsorption rate of bottom sediment is much less than that of suspended sediment, but the sediment transport pattern does not affect the final (equilibrium) concentration of dissolved cadmium. This result indicates that the parameters of an adsorption isotherm are the same regardless of the sediment transport pattern. In the turbulence simulation tank, the turbulence is generated by harmonic grid-stirred motions, and the turbulence intensity is quantified in terms of eddy diffusivity, which is equal to 9.84F(F is the harmonic vibration frequency) and is comparable to natural surface water conditions.When the turbulence intensity of flow is low and sediment particles stay as bottom sediment, the adsorption rate is significantly low, and the adsorption quantity compared with that of suspended sediment is negligible in the 6 h duration of the experiment. This result greatly favors the simplification of the numerical modeling of heavy metal pollutant transformation in natural rivers. When the turbulence intensity is high but bottom sediment persists, the rate and extent of descent of the dissolved cadmium concentration in the tank noticeably increase, and the time that is required to reach adsorption equilibrium also increases considerably due to the continuous exchange that occurs between the suspended sediment and the bottom sediment.A comparison of the results of the experiments in the batch reactor and those in the turbulence simulation tank reveals that the adsorption ability of

  9. Carotenoid diagenesis in a marine sediment

    Watts, C. D.; Maxwell, J. R.


    The major carotenoids at three levels (3, 40, and 175 m below the sediment-water interface) in a core from a marine sediment (Cariaco Trench, off Venezuela) have been examined. Mass and electronic spectral data have provided evidence for the onset of a progressive reduction of carotenoids in the geological column. The time scale of the process appears to depend on the particular carotenoid. Reduction of up to two double bonds is observed for the diol, zeaxanthin, in the oldest sediment (about 340,000 years old) but no reduction is observed in the younger samples (about 5000 and 56,000 years old). The diketone, canthaxanthin, shows evidence of reduction of up to two double bonds in the 56,000-yr sample and up to five double bonds in the oldest sample. No reduction of beta-carotene was observed in any of the samples.

  10. Lipids of aquatic sediments, recent and ancient

    Eglinton, G.; Hajibrahim, S. K.; Maxwell, J. R.; Quirke, J. M. E.; Shaw, G. J.; Volkman, J. K.; Wardroper, A. M. K.


    Computerized gas chromatography-mass spectrometry (GC-MS) is now an essential tool in the analysis of the complex mixtures of lipids (geolipids) encountered in aquatic sediments, both 'recent' (less than 1 million years old) and ancient. The application of MS, and particularly GC-MS, has been instrumental in the rapid development of organic geochemistry and environmental organic chemistry in recent years. The techniques used have resulted in the identification of numerous compounds of a variety of types in sediments. Most attention has been concentrated on molecules of limited size, mainly below 500 molecular mass, and of limited functionality, for examples, hydrocarbons, fatty acids and alcohols. Examples from recent studies (at Bristol) of contemporary, 'recent' and ancient sediments are presented and discussed.

  11. Discrete element modeling of subglacial sediment deformation

    Damsgaard, Anders; Egholm, David L.; Piotrowski, Jan A.


    -shear experiments on simple granular materials are compared to results from similar numerical experiments. The simulated DEM material and all tested laboratory materials deform by an elasto-plastic rheology under the applied effective normal stress. These results demonstrate that the DEM is a viable alternative...... on the level of normal (overburden) stress, and we show how high normal stress can mobilize material to great depths. The particle rotational axes tend to align with progressive shear strain, with rotations both along and reverse to the shear direction. The results from successive laboratory ring...... to continuum models for small-scale analysis of sediment deformation. It can be used to simulate the macromechanical behavior of simple granular sediments, and it provides an opportunity to study how microstructures in subglacial sediments are formed during progressive shear strain....

  12. Carbon Storage in Tagus Salt Marsh Sediments

    Cacador, Isabel, E-mail:; Costa, Ana Luisa [University of Lisbon, Institute of Oceanography, Faculty of Sciences (Portugal); Vale, Carlos [Institute for Sea and Fisheries Research (IPIMAR) (Portugal)


    Seasonal variation of above ground and belowground biomass of Spartina maritima and Halimione portulacoides, decomposition rates of belowground detritus in litterbags, and carbon partitioning in plant components and sediments were determined in two Tagus estuary marshes with different environmental conditions. Total biomass was higher in the saltier marsh from 7,190 to 6,593 g m{sup -2} dw and below ground component contributed to more than 90%. Litterbag experiment showed that 30 to 50% of carbonis decomposed within a month (decomposition rate from 0.024 to 0.060 d{sup -1}). Slower decomposition in subsequent periods agrees with accumulation of carbon concentration in sediment. Atmospheric carbon annually transferred to the plant belowground biomass is stored more efficiently in sediments of Corroios than Pancas.


    Jianjun ZHOU; Binliang LIN; Bingnan LIN


    This paper presents a rational basis to model the transport of suspended sediment. The looseboundary condition for 3D models and the adjustment coefficients for both the depth-integrated 2D and laterally integrated 1D models are treated comprehensively. A combination of Dirichlet and Neumann conditions is proposed as the loose-boundary condition. The adjustment coefficient for 2D models is obtained on the basis of the proposed boundary condition and analytical solutions developed for some simple cases of non-equilibrium transport of sediment in uniform flows. The adjustment coefficient for 1D models for natural rivers is further obtained from lateral integration. Comparisons with analytical solutions and a considerable amount of laboratory and prototype data show that mathematical models developed along the proposed line of attack would well simulate the transport of suspended sediment in practical problems.

  14. Equilibrium bed-concentration of nonuniform sediment


    Knowledge of the equilibrium bed-concentration is vital to mathematical modeling of the river-bed deformation associated with suspended load but previous investigations only dealt with the reference concentration of uniform sediment because of difficulties in observation of the bed-concentration. This work is a first attempt to develop a theoretical formula for the equilibrium bed-concentration of any fraction of nonuniform sediment defined at the bed-surface. The formula is based on a stochastic-mechanistic model for the exchange of nonuniform sediment near the bed, and described as a function of incipient motion probability, non-ceasing probability, pick-up probability, and the ratio of the average single-step continuous motion time to static time. Comparison of bed-concentration calculated from the proposed formula with the measured data showed satisfactory agreement, indicating the present formula can be used for solving the differential equation governing the motion of suspended load.

  15. Geochemical anomalies in South Caspian sediments

    Baturin, G. N.; Gordeev, V. V.; Lisitzin, A. P.


    Study of the element composition of ten samples of modern terrigenous and carbonate sediments from the northern part of the Caspian Sea by the ICP-MS method showed that these sediments were enriched in sulfur, nonferrous metals, and some related minor elements including Se, Te, Re, and others in comparison with the average composition of sedimentary rocks. It is assumed that local hydrothermal seeps similar to those known on the Cheleken Peninsula and which may be formed in other areas of this tectonically active zone are the sources of these elements. In addition, such a composition of sediments may indicate the sporadic contamination of bottom water with hydrogen sulfide, which has been observed in areas of the South and Middle Caspian by many researchers.

  16. Recent sediment dynamics in hadal trenches

    Turnewitsch, Robert; Falahat, Saeed; Stehlikova, Jirina


    by evaluating ratios of measured (sediment-derived) and expected (water-column-derived) sedimentary inventories of the naturally occurring and radioactive particulate-matter tracer Pb-210(xs). The sites comprise a broad range of surface-ocean productivity and physical-oceanographic regimes. Across the five...... trench-axis settings the inventory ratio varies between 0.5 and 4.1, with four trench-axis settings having ratios > 1 (sediment focussing) and one trench-axis setting a ratio ... but significant influence on particulate-matter dynamics and food supply in hadal trenches in particular, but possibly also in the deep seas in general. A mechanism for the influence of internal tides on sediment dynamics is proposed. (C) 2014 Elsevier Ltd. All rights reserved....

  17. Determination of sediment provenance by unmixing the mineralogy of source-area sediments: The "SedUnMix" program

    Andrews, John T.; Eberl, D.D.


    Along the margins of areas such as Greenland and Baffin Bay, sediment composition reflects a complex mixture of sources associated with the transport of sediment in sea ice, icebergs, melt-water and turbidite plumes. Similar situations arise in many contexts associated with sediment transport and with the mixing of sediments from different source areas. The question is: can contributions from discrete sediment (bedrock) sources be distinguished in a mixed sediment by using mineralogy, and, if so, how accurately? To solve this problem, four end-member source sediments were mixed in various proportions to form eleven artificial mixtures. Two of the end-member sediments are felsic, and the other two have more mafic compositions. End member and mixed sediment mineralogies were measured for the Elsevier B.V..

  18. Amylose-iodine complex. I. Sedimentation behavior.

    Dintzis, F R; Beckwith, A C; Babcock, G E; Tobin, R


    Sedimentation measurements are reported on solutions of blue amylose-iodine complexes in the range of 0.001 to 0.007% amylose. Amylose fractions B and F2, of weight average molecular weight average molecular weight 4.0 X 10(5) and 3.4 X 10(4), respectively, were used in this study. Iodine complexes of these fractions formed polydisperse solutions of limited solubility and stability. Sedimentation coefficients increased as a function of potassium iodide concentration. Values for fraction B complexes varied from (16.3 +/- 1.0) X 10(-13) at 1.2 X 10(-3) M KI to (57.2 +/- 7.5) X 10(-13) at 8.3 X 10(-3) M KI; values for fraction F2 complexes varied from (10.0 +/- 1.2) X 10(-13) at 1.2 X 10(-13) M KI to (24.8 +/- 3.9) X 10(-13) at 9.5 X 10(-3) M KI. At constant potassium iodide concentration, sedimentation coefficients, within our experimental error of 10 to 15% standard deviation, are independent of amylose concentration. Time dependence of sedimentation coefficient values was observed for solutions either saturated or unsaturated with respect to the iodine-binding capacity of amylose. For iodine-saturated complex solutions, sedimentation coefficients extrapolated to zero potassium iodide concentration were two to three times greater than for the parent amylose. Measurements are evaluated in terms of possible polyelectrolytic charge effects and aggregation. Under conditions used in these experiments, aggregation of amylose-iodide complexes appears to be the mechanism responsible for the large increase in sedimentation coefficients.

  19. Heavy metal removal from sediments by biosurfactants.

    Mulligan, C N; Yong, R N; Gibbs, B F


    Batch washing experiments were used to evaluate the feasibility of using biosurfactants for the removal of heavy metals from sediments. Surfactin from Bacillus subtilis, rhamnolipids from Pseudomonas aeruginosa and sophorolipid from Torulopsis bombicola were evaluated using a metal-contaminated sediment (110mg/kg copper and 3300mg/kg zinc). A single washing with 0.5% rhamnolipid removed 65% of the copper and 18% of the zinc, whereas 4% sophorolipid removed 25% of the copper and 60% of the zinc. Surfactin was less effective, removing 15% of the copper and 6% of the zinc. The technique of ultrafiltration and zeta potential measurements were used to determine the mechanism of metal removal by the surfactants. It was then postulated that metal removal by the biosurfactants occurs through sorption of the surfactant on to the soil surface and complexation with the metal, detachment of the metal from the soil into the soil solution and hence association with surfactant micelles. Sequential extraction procedures were used on the sediment to determine the speciation of the heavy metals before and after surfactant washing. The carbonate and oxide fractions accounted for over 90% of the zinc present in the sediments. The organic fraction constituted over 70% of the copper. Sequential extraction of the sediments after washing with the various surfactants indicated that the biosurfactants, rhamnolipid and surfactin could remove the organically-bound copper and that the sophorolipid could remove the carbonate and oxide-bound zinc. Therefore, heavy metal removal from sediments is feasible and further research will be conducted.




    Results from simulated experiments in several laboratories show that host sediments influence hydrate formation in accord with known heterogeneity of host sediments at sites of gas hydrate occurrence (1). For example, in Mackenzie Delta, NWT Canada (Mallik 2L-38 well), coarser-grained units (pore-filling model) are found whereas in the Gulf of Mexico, the found hydrate samples do not appear to be lithologically controlled. We have initiated a systematic study of sediments, initially focusing on samples from various depths at a specific site, to establish a correlation with hydrate occurrence (or variations thereof) to establish differences in their microstructure, porosity, and other associated properties. The synchrotron computed microtomography (CMT) set-up at the X-27A tomography beam line at the National Synchrotron Light Source (NSLS), Brookhaven National Laboratory was used as a tool to study sediments from Blake Ridge at three sub bottom depths of 0.2, 50, and 667 meters. Results from the tomographic analysis of the deepest sample (667 m) are presented here to illustrate how tomography can be used to obtain new insights into the structures of methane hydrate host sediments. The investigation shows the internal grain/pore space resolution in the microstructure and a 3-D visualization of the connecting pathways obtained following data segmentation into pore space and grains within the sediment sample. The analysis gives the sample porosity, specific surface area, mean particle size, and tortuosity, as well. An earlier report on the experimental program has been given by Mahajan et al. (2).

  1. Factors governing sediment quality (PAH) in rivers

    Schwientek, Marc; Rügner, Hermann; Scherer, Ulrike; Rode, Michael; Grathwohl, Peter


    The contamination of riverine sediments and suspended matter with hydrophobic pollutants is typically associated with urban land use. It is, however, rarely related to the sediment supply of the watershed. We show for a suite of catchments in two regions of Germany with contrasting land use and geology, that the contamination of suspended particles with polycyclic aromatic hydrocarbons (PAH) may be predicted based on the ratio of inhabitants residing within the catchment and the catchment's sediment yield. The applicability of this concept is demonstrated for catchments ranging in size from 100 to >3000 km2. This implies that the loading of particles with PAH is more or less time invariant which is also indicated by long term measurements from sub catchments of the upper Neckar River in Southwest Germany. Data on sediment yields are rare and the installation of appropriate measurement stations is expensive, the establishment of data series time-consuming. Therefore, modeling of sediment yields based on the universal soil loss equation is proposed. Although this method lacks a physical basis, it is feasible at larger scales and is shown to lead to reasonable results at low costs. The importance of catchment properties in terms of sediment supply and the implications of the presented concept for water resources management are discussed. For instance, it may easily be used to estimate the vulnerability of river systems to particle-associated urban pollutants with similar input pathways as the PAH or to indicate if contaminant point sources such as sites of legacy pollution exist in a river catchment.

  2. Palaeomagnetic research on karst sediments in Slovenia

    Zupan Hajna Nadja


    Full Text Available We have conducted palaeomagnetic and magnetostratigraphic research on karst sediments in Slovenia since 1997. More than 2,000samples were taken and analysed in 36 different profiles at 21 locations in caves and on the surface. Standard palaeomagnetic analyseswere used (thermal and alternating field demagnetisation, magnetic susceptibility measurements, etc.. There is no evidence of youngermarine deposition than Eocene in the SW part of Slovenia. Younger sediments occur only in caves and very rarely on the karst surface(different soils and a few remains of terrigeneous sediments. Marine and terrestrial Tertiary to Plio–Quaternary deposition occurs in theSE and E Slovenia. Chronostratigraphy of cave sediments in SW Slovenia completed by Rado Gospodarič in the 1980s was basedon Pleistocene warm/cold cycles. Later Th/U dating indicated that speleothems from different caves in Slovenia are older. New datingprincipally results from palaeomagnetism and magnetostratigraphy of cave sediments calibrated, in some sites, by Th/U, palaentologicaland geomorphological analyses. Calibrated data contributed to the reconstruction of speleogenesis, deposition in caves, and indirectly tothe evolution of karst surfaces and succession of tectonic movements. The evolution of caves in the Slovenian territory took part withinone post-Eocene karstification period. This period continues to the present, and can be subdivided into individual, but not well limited,phases related to Cenozoic palaeogeographical changes. The period contains distinct phases of massive deposition in caves with as yetstill preserved sediments dated to about 5.4–4.1 Ma (Miocene–Pliocene, 3.6–1.8 Ma (Pliocene and Quaternary, following the cessationof Miocene deposition in the Pannonian Basin in the central, E and SE Slovenia and post-Messinian evolution in the SW and W Slovenia.

  3. An Evaluation of Bera Lake (Malaysia Sediment Contamination Using Sediment Quality Guidelines

    Mohammadreza Gharibreza


    Full Text Available Bera Lake is known as the first RAMSAR site and is the largest natural lake in Malaysia. Sediment quality guidelines (SQGs and Geoaccumulation index were used to evaluate Bera Lake sediment contamination. Five undisturbed cores were collected from Bera Lake sediment. Major and trace levels of elements were determined for 132 subsamples using an inductively coupled plasma mass spectrometry (ICP-MS. The results marked two major groups of metallic elements bonded to the terrestrial and organic-rich sediments. Terrestrial sediments were strongly associated with accumulation of Li, Al, Pb, Cu, Cr, Na, Mg, Sr, and K during main fluxes of metals. However, a strong positive correlation was obtained between Fe, Mn, As, Zn, Cu, Ni, Ca, and Cd elements and TOC and TN. The Mn/Fe ratio revealed a long-term redox and acidic condition at Bera Lake. Geoaccumulation index for all individual metals has classified Bera Lake sediment as low to moderately polluted. However, elemental values when compared with thresholds limits of SQG indicated that Bera Lake sediments were contaminated by arsenic and iron. Results prove that deforestation during the five phases of land developments since 1972 has significantly contributed to the existence of metals fluxes into the area.

  4. Sediment acoustic index method for computing continuous suspended-sediment concentrations

    Landers, Mark N.; Straub, Timothy D.; Wood, Molly S.; Domanski, Marian M.


    Suspended-sediment characteristics can be computed using acoustic indices derived from acoustic Doppler velocity meter (ADVM) backscatter data. The sediment acoustic index method applied in these types of studies can be used to more accurately and cost-effectively provide time-series estimates of suspended-sediment concentration and load, which is essential for informed solutions to many sediment-related environmental, engineering, and agricultural concerns. Advantages of this approach over other sediment surrogate methods include: (1) better representation of cross-sectional conditions from large measurement volumes, compared to other surrogate instruments that measure data at a single point; (2) high temporal resolution of collected data; (3) data integrity when biofouling is present; and (4) less rating curve hysteresis compared to streamflow as a surrogate. An additional advantage of this technique is the potential expansion of monitoring suspended-sediment concentrations at sites with existing ADVMs used in streamflow velocity monitoring. This report provides much-needed standard techniques for sediment acoustic index methods to help ensure accurate and comparable documented results.

  5. Sediment studies at Bikini Atoll part 2. inventories of transuranium elements in surface sediments

    Noshkin, V.E.; Eagle, R.J.; Wong, K.M.; Robison, W.L.


    This is the second of three reports on Bikini sediment studies, which discusses the concentrations and inventories of {sup 241}Am and {sup 239+240}Pu in sediments from the lagoon. Surface sediment samples were collected from 87 locations over the entire lagoon at Bikini Atoll during 1979. The collections were made to map the distribution of long-lived radionuclides associated with the bottom material and to show what modifications occurred in the composition of the sediment as a result of the testing program. Present inventories for {sup 241}Am and {sup 239+240}Pu in the surface 2 cm of sediment are estimated to be 14 and 17 TBq, respectively. These values are estimated to represent only 14% of the total inventory in the sediment column. Sediment inventories of {sup 239+240}Pu and {sup 241}Am are changing only slowly with time through chemical- physical processes that continuously mobilize small amounts of the transuranics to the water column. The lowest concentrations and inventories are associated with deposits logoonward of the eastern reef.

  6. Lutocline Mixing and sediment wave interaction

    Medina, P.; Gonzalez/Nieto, P. L.


    Coastal mixing induced by waves is modeled experimentally by means of an oscillating grid, [1,2]when the boundary layer is turbulent as when waves generated by a storm break and spill, or when wind interacts with wave stirring, then a strong turbulence lifts off bottom sediments and these often form a distinct sediment laden region capped by a sharp density interface called in this case a Lutocline. These particle layer may be transported to deeper regions by compensation or gravity currents[3,4]. Point velocity distributions created by wind, waves and sloping currents are dominated by breaker areas which act as strong attractors for the sediments in suspension, because at the same time there is a higher mean water level near the coast due to wave radiation[5]. The combination of offshore and onshore together with the longshore and crosshore strong currents due to wave radiation imbalance produce the strongest local shear induced morphological sediment transport. The use of a circular Couette flow to hold sediments in suspension using a vortex generator (producing shear) or an oscilating grid is used to investigate the parameter range of sediment lift off. [1] Crespo A. and Redondo J.M.(1989) A simple experiment on the interaction between gravity currents and sediment transport, Rev. de Geofisica 45, 203-210. [2] Redondo J.M. and Cantalapiedra I.R. (1993) Mixing in horizontally heterogeneous flows", Applied Scientific Research, 51, 217-222 [3] J.E. Simpson (1997) Gravity Currents: In the Environment and the Laboratory, 2nd Edition, Cambridge University Press, Cambridge, England. [4] R.S.J. Sparks, R.T. Bonnecaze, H.E. Huppert, J.R. Lister, M.A. Hallworth, H. Mader, J. Phillips (1993) Sediment-laden gravity currents with reversing buoyancy, Earth Planet. Sci. Lett. 114. 243-257. [5] Bezerra M.O., Diez M., Medeiros C. Rodriguez A., Bahia E., Sanchez Arcilla A and Redondo J.M. (1998) Study on the influence of waves on coastal diffusion using image analysis. Applied

  7. Sediments at the top of Earth's core.

    Buffett, B A; Garnero, E J; Jeanloz, R


    Unusual physical properties at the core-mantle boundary have been inferred from seismic and geodetic observations in recent years. We show how both types of observations can be explained by a layer of silicate sediments, which accumulate at the top of the core as Earth cools. Compaction of the sediments expels most of the liquid iron but leaves behind a small amount of core material, which is entrained in mantle convection and may account for the isotopic signatures of core material in some hot spot plumes. Extraction of light elements from the liquid core also enhances the vigor of convection in the core and may increase the power available to the geodynamo.

  8. 300 Area process trench sediment analysis report

    Zimmerman, M.G.; Kossik, C.D.


    This report describes the results of a sampling program for the sediments underlying the Process Trenches serving the 300 Area on the Hanford reservation. These Process Trenches were the subject of a Closure Plan submitted to the Washington State Department of Ecology and to the US Environmental Protection Agency in lieu of a Part B permit application on November 8, 1985. The closure plan described a proposed sampling plan for the underlying sediments and potential remedial actions to be determined by the sample analyses results. The results and proposed remedial action plan are presented and discussed in this report. 50 refs., 6 figs., 8 tabs.

  9. Methods of assessment of stormwater sediments quality

    Sałata Aleksandra


    Full Text Available Concentration of heavy metal (cadmium, copper, chromium, nickel, lead and zinc in sediments collected from the stormwater treatment plant located in the urbanised catchment were investigated using geo-accumulation index and enrichment factor to determine metal accumulation and pollution status. Total metal concentrations varied widely in studied materials and the mean values were higher than their background values. The Igeo results indicate that tested sediments were uncontaminated with respect to Cd. The study area is moderately to strongly contaminated with Zn, Pb and Cu. The other elements are within the scope moderate contamination.

  10. Gas Bubble Growth in Muddy Sediments


    it is fairly easy to show that R ~ eat (a = S/ρg), i.e. exponential growth , which is a far faster than has been suggested previously. We expect this...Gas Bubble Growth in Muddy Sediments Bernard P. Boudreau Department of Oceanography Dalhousie University Halifax, Nova Scotia B3H 4J1, Canada phone...objective is a working model for the growth of a single, isolated bubble in a marine sediment, validated with bubble growth data obtained in laboratory



    Yang's (1996) sediment transport theory based on unit stream power is one of the most accurate theories, but in his equations the use of product of slope and critical velocity instead for critical unit stream power is not suitable. Dimensionless critical unit stream power required at incipient motion can be derived from the principle of conservation of power as a function of dimensionless particle diameter and relative roughness. Based on a lot of data sets, this new criterion was developed. By use of this new criteria, Yang's (1973) sand transport formula and his 1984 gravel transport formula could be improved when sediment concentration is less than about 100 ppm by weight.

  12. On extracting sediment transport information from measurements of luminescence in river sediment

    Gray, Harrison J.; Tucker, Gregory E.; Mahan, Shannon A.; McGuire, Chris; Rhodes, Edward J.


    Accurately quantifying sediment transport rates in rivers remains an important goal for geomorphologists, hydraulic engineers, and environmental scientists. However, current techniques for measuring long-time scale (102-106 years) transport rates are laborious, and formulae to predict transport are notoriously inaccurate. Here we attempt to estimate sediment transport rates by using luminescence, a property of common sedimentary minerals that is used by the geoscience community for geochronology. This method is advantageous because of the ease of measurement on ubiquitous quartz and feldspar sand. We develop a model from first principles by using conservation of energy and sediment mass to explain the downstream pattern of luminescence in river channel sediment. We show that the model can accurately reproduce the luminescence observed in previously published field measurements from two rivers with very different sediment transport styles. The model demonstrates that the downstream pattern of river sand luminescence should show exponential-like decay in the headwaters which asymptotes to a constant value with further downstream distance. The parameters from the model can then be used to estimate the time-averaged virtual velocity, characteristic transport lengthscale, storage time scale, and floodplain exchange rate of fine sand-sized sediment in a fluvial system. The sediment transport values predicted from the luminescence method show a broader range than those reported in the literature, but the results are nonetheless encouraging and suggest that luminescence demonstrates potential as a sediment transport indicator. However, caution is warranted when applying the model as the complex nature of sediment transport can sometimes invalidate underlying simplifications.

  13. Sediment dispersal pattern in the Bay of Bengal - evidence for commencement of Bengal Fan sedimentation

    Krishna, K. S.; Ismaiel, M.; Karlapati, S.; Gopala Rao, D.; Mishra, J.; D, S.


    The sediment succession in the Bay of Bengal records signatures corresponding to India-Asia collision, regional climate, and erosional processes of the Himalayan orogeny and the Indian subcontinent. The Bengal Fan - world's largest submarine fan - has been long studied to understand the link between the Himalayan tectonics and Asian monsoon climate, but early phase information of the Himalaya erosion is not retrieved from the Indian Ocean due to lack of deep-core samples. Therefore, the missing corresponding signals hampered the understanding of coupled processes between tectonics, climate and erosion. Seismic reflection profiles and industrial drill wells from the western Bay of Bengal show two different modes of sediment deposition: initially Indian peninsular rivers discharged sediments to the ocean at a rate ~20 m/m.y. until Oligocene-Miocene time (~23 Ma) with the exception of two fairly-enhanced sediment pulses from 65 to 54 and again from 34 to 23 Ma; since 23 Ma the Ganges and Brahmaputra rivers added huge volumes of sediments to the bay with variable rates range from 40 to >1000 m/m.y. Using seismic stratigraphic technique we found a distinct increase in sediment discharge (~140 m/m.y.) at 23 Ma is an important age marker for the onset of Bengal Fan sedimentation as a coupled connection between the Himalayan tectonics and Asian climate. Further rise in sedimentation rate during the period 6.8 - 0.8 Ma is surprisingly not in agreement with the decrease in sediment rate reported at ODP Leg 116 sites in the distal Bengal Fan, but coincident with the change in monsoon intensity. Here we provide well constrained ages for the growth of the Bengal Fan, which can serve as benchmark for interactions between the Himalayan exhumation and Asian climate.

  14. Heating Unsaturated Sediments Using Solar Energy to Enhance Passive Sediment Remediation Technologies

    Rossman, A.


    Sediment heating has been shown to enhance passive sediment remediation technologies such as bioremediation and barometric pumping (passive soil venting). Sediment heating raises the slow remediation rates that often limit the widespread use of these technologies. In bioremediation applications, a 10 degree C increase in subsurface temperature is expected to double the microbial activity, and thus the remediation rate. The removal rate of tetracholorethylene (PCE - a common subsurface contaminant) by passive soil vapor extraction is expected to nearly double in low-permeable sediments when the subsurface is heated 10 degree C from ambient temperatures due to an increased vapor pressure in the PCE. When the sediment is heated using renewable energy sources, these thermally enhanced remediation technologies can be environmentally benign alternatives to conventional remediation techniques that rely on large external energy inputs. The thermally enhanced passive technologies may be particularly useful for remediating unsaturated, low-permeable lenses that are troublesome to most conventional remediation technologies such as conventional soil vapor extraction and co-solvent flushes. The main objective of this work was to quantify subsurface sediment heating using a solar powered heat injection well. To do this, a pilot sediment heating system was installed in Vermont and high resolution meteorological and sediment temperature data were collected using a stand-alone data acquisition system. Unsaturated, silty sediments were heated in-situ by converting the direct and indirect solar energy available at the surface to heat energy in the subsurface using stand-alone renewable energy sources and a resistive element heat injection well. The heat injection well was powered by a 600-W passively tracking photovoltaic (PV) array and a small 1.2-m swept area wind turbine. It is envisioned that the heat injection well would be placed directly into an area of high subsurface

  15. Toxicity of silicon carbide nanowires to sediment-dwelling invertebrates in water or sediment exposures

    Mwangi, Joseph N.; Wang, Ning; Ritts, Andrew; Kunz, James L.; Ingersoll, Christopher G.; Li, Hao; Deng, Baolin


    Silicon carbide nanowires (SiCNW) are insoluble in water. When released into an aquatic environment, SiCNW would likely accumulate in sediment. The objective of this study was to assess the toxicity of SiCNW to four freshwater sediment-dwelling organisms: amphipods (Hyalella azteca), midges (Chironomus dilutus), oligochaetes (Lumbriculus variegatus), and mussels (Lampsilis siliquoidea). Amphipods were exposed to either sonicated or nonsonicated SiCNW in water (1.0 g/L) for 48 h. Midges, mussels, and oligochaetes were exposed only to sonicated SiCNW in water for 96 h. In addition, amphipods were exposed to sonicated SiCNW in whole sediment for 10 d (44% SiCNW on dry wt basis). Mean 48-h survival of amphipods exposed to nonsonicated SiCNW in water was not significantly different from the control, whereas mean survival of amphipods exposed to sonicated SiCNW in two 48-h exposures (0 or 15% survival) was significantly different from the control (90 or 98% survival). In contrast, no effect of sonicated SiCNW was observed on survival of midges, mussels, or oligochaetes. Survival of amphipods was not significantly reduced in 10-d exposures to sonicated SiCNW either mixed in the sediment or layered on the sediment surface. However, significant reduction in amphipod biomass was observed with the SiCNW either mixed in sediment or layered on the sediment surface, and the reduction was more pronounced for SiCNW layered on the sediment. These results indicated that, under the experimental conditions, nonsonicated SiCNW in water were not acutely toxic to amphipods, sonicated SiCNW in water were acutely toxic to the amphipods, but not to other organisms tested, and sonicated SiCNW in sediment affected the growth but not the survival of amphipods.

  16. On extracting sediment transport information from measurements of luminescence in river sediment

    Gray, Harrison J.; Tucker, Gregory E.; Mahan, Shannon; McGuire, Chris; Rhodes, Edward J.


    Accurately quantifying sediment transport rates in rivers remains an important goal for geomorphologists, hydraulic engineers, and environmental scientists. However, current techniques for measuring long-time scale (102–106 years) transport rates are laborious, and formulae to predict transport are notoriously inaccurate. Here we attempt to estimate sediment transport rates by using luminescence, a property of common sedimentary minerals that is used by the geoscience community for geochronology. This method is advantageous because of the ease of measurement on ubiquitous quartz and feldspar sand. We develop a model from first principles by using conservation of energy and sediment mass to explain the downstream pattern of luminescence in river channel sediment. We show that the model can accurately reproduce the luminescence observed in previously published field measurements from two rivers with very different sediment transport styles. The model demonstrates that the downstream pattern of river sand luminescence should show exponential-like decay in the headwaters which asymptotes to a constant value with further downstream distance. The parameters from the model can then be used to estimate the time-averaged virtual velocity, characteristic transport lengthscale, storage time scale, and floodplain exchange rate of fine sand-sized sediment in a fluvial system. The sediment transport values predicted from the luminescence method show a broader range than those reported in the literature, but the results are nonetheless encouraging and suggest that luminescence demonstrates potential as a sediment transport indicator. However, caution is warranted when applying the model as the complex nature of sediment transport can sometimes invalidate underlying simplifications.

  17. The role of reservoirs in global sediment budgets

    Verstraeten, G.; Renwick, W.; Poesen, J.; de Vente, J.; Vinogradova, N.; Bazzoffi, P.; Lajczak, A.; Radoane, M.; Rey, F.


    Man-made reservoirs are an important sink for sediment eroded from the land and thus constitute an important aspect of the sediment budget. Their impact has mostly been assessed at the scale of an individual river basin but rarely on a continental or even a global scale. Although there are recent estimates of global sediment retention by dams, these studies have solely focussed on the role reservoirs play in controlling sediment fluxes to the oceans, thus on their net impact for global sediment budgets. However, the net impact of reservoirs is much larger than the gross amount of sediment stored within all reservoirs on the globe. Furthermore, the impact of smaller waterholding structures is mostly neglected. In this paper, we present a first comprehensive assessment of global annual sediment storage within reservoirs based on sedimentation rates obtained from over 3700 reservoirs, representing nearly 25% of the global storage capacity. We argue that at least 27 petagrams (Pg) sediment are stored annually in all larger reservoirs, with possible sediment retention of an additional 27 Pg in smaller man-made water bodies. These values are 2 to 4 times larger than the estimated sediment mass transported annually to the global coastal ocean, and 8 to 15 times larger than the net reduction of sediment flux to the oceans attributed to reservoirs. These estimates provide minimum annual continental erosion rates and comparison with soil erosion data suggest that soil erosion on agricultural land is not the dominant source of sediment deposited in reservoirs or exported to the ocean. In recent decades, reservoir sedimentation has become as least as important as floodplain sediment storage and can nowadays be considered as one of the most important sediment sinks in continental sediment budgets.

  18. Entrainment at a sediment concentration interface in turbulent channel flow

    Salinas, Jorge; Shringarpure, Mrugesh; Cantero, Mariano; Balachandar, S.


    In this work we address the role of turbulence on entrainment at a sediment concentration interface. This process can be conceived as the entrainment of sediment-free fluid into the bottom sediment-laden flow, or alternatively, as the entrainment of sediment into the top sediment-free flow. We have performed direct numerical simulations for fixed Reynolds and Schmidt numbers while varying the values of Richardson number and particle settling velocity. The analysis performed shows that the ability of the flow to pick up a given sediment size decreases with the distance from the bottom, and thus only fine enough sediment particles are entrained across the sediment concentration interface. For these cases, the concentration profiles evolve to a final steady state in good agreement with the well-known Rouse profile. The approach towards the Rouse profile happens through a transient self-similar state. Detailed analysis of the three dimensional structure of the sediment concentration interface shows the mechanisms by which sediment particles are lifted up by tongues of sediment-laden fluid with positive correlation between vertical velocity and sediment concentration. Finally, the mixing ability of the flow is addressed by monitoring the center of mass of the sediment-laden layer. With the support of ExxonMobil, NSF, ANPCyT, CONICET.

  19. Colonization dynamics of ciliate morphotypes modified by shifting sandy sediments.

    Risse-Buhl, Ute; Felsmann, Katja; Mutz, Michael


    Sandy stream-bed sediments colonized by a diverse ciliate community are subject to various disturbance regimes. In microcosms, we investigated the effect of sediment shifting on the colonization dynamics of 3 ciliate morphotypes differing in morphology, behavior and feeding strategy. The dynamics of the ciliate morphotypes inhabiting sediment pore water and overlying water were observed at 3 sediment shifting frequencies: (1) stable sediments, (2) periodically shifting sediments such as migrating ripples, and (3) continuously shifting sediments as occurring during scour events of the uppermost sediment. Sediment shifting significantly affected the abundance and growth rate of the ciliate morphotypes. The free-swimming filter feeder Dexiostoma campylum was vulnerable to washout by sediment shifting since significantly higher numbers occurred in the overlying water than in pore water. Abundance of D. campylum only increased in pore water of stable sediments. On the contrary, the vagile grasper feeder Chilodonella uncinata and the sessile filter feeder Vorticella convallaria had positive growth rates and successfully colonized sediments that shifted periodically and continuously. Thus, the spatio-temporal pattern of sediment dynamics acts as an essential factor of impact on the structure, distribution and function of ciliate communities in sand-bed streams.

  20. Influences of microbial activity and sediment disturbance on hyporheic exchange in sandy sediments

    Mendoza-Lera, C.; Mutz, M.


    Besides the vertical hydraulic gradient, sediment permeability is the main controlling factor of water exchange across the stream bed. Reduction of permeability by microbial activity is reported from unidirectional percolated sediment columns. We investigated effects of algal and bacterial activity on hyporheic exchange (vertical water flux, VWF) under semi-natural stream conditions in 16 outdoor sand-bed flumes during 30 day. Variability of bedform was considered by 8 flumes having plane-bed and 8 flumes ripple-bed. To gain information on the relative significance of algae and heterotrophic microorganisms, half of the flumes were operated under constant dark conditions (no-light flumes), while the others were exposed to daylight. After 21 days, the upper 2 cm of the sediments was manually disturbed simulating moderate sediment dynamics which frequently occurs in natural sand-bed streams. VWF was measured by tracing loss of uranine from the water column while flumes were operating in re-circulating mode. Algae and bacterial abundance, organic matter, and CaCO3 content in sediments were determined. Sediment potential respiration (SPR) was measured in flow through respiration chambers and oxygen bubbles from primary production were sampled. As expected, initial VWF was higher in ripple-bed. After 13 days, VWF was completely inhibited in both plane and ripple-bed flumes under daylight conditions. In no-light flumes reduction of VWF was moderate. Microbial precipitation of calcium carbonate and production of oxygen bubbles in the uppermost sediments blocked the pore space. After 3 weeks, abundance and biomass of algae and SPR in the upper 2 cm of sediment were higher in daylight flumes than in no-light flumes, while bacterial abundance was higher in no-light flumes. The sediment disturbance at day 21 released the oxygen bubbles increased bed permeability and therefore restored VWF to initial rates in day-light flumes. SPR was unaffected by the sediment disturbance. In

  1. Catchment sediment flux: a lake sediment perspective on the onset of the Anthropocene?

    Chiverrell, Richard


    Definitions of the Anthropocene are varied but from a geomorphological perspective broadly can be described as the interval of recent Earth history during which 'humans have had an 'overwhelming' effect on the Earth system' (Brown et al., 2013). Identifying the switch to a human-dominated geomorphic process regime is actually a challenging process, with in the 'Old World' ramping up of human populations and impacts on earth surface processes since the Neolithic/Mesolithic transition and the onset of agriculture. In the terrestrial realm lakes offer a unique window on changes in human forcing of earth surface processes from a sedimentary flux perspective, because unlike alluvial and hill-slope systems sedimentation is broadly continuous and uninterrupted. Dearing and Jones (2003) showed for a global dataset of lakes a 5-10 fold increase in sediment delivery comparing pre- and post-anthropogenic disturbance. Here sediment records from several lakes in lowland agricultural landscapes are presented to examine the changes in the flux and composition of materials delivered from their catchments. By definition the lakes record the switch to a human dominated system, but not necessary in accelerated sediment accumulation rates with changes in sediment composition equally important. Data from Crose, Hatch and Peckforton Meres, in lowland northwest England are interrogated producing quantitative land-cover reconstructions from pollen spectra calculated using the REVEALS model (Sugita, 2007), geochemical evidence for changes sediment provenance and flux, and 14C and stable Pb pollutant based chronological models detecting changes in sediment accumulation rate. The lake sediment geochemistry points to several phases of heightened human impact within these small agricultural catchments. Following small-in-scale forest cover reductions and limited impacts in terms of sediment flux during the Neolithic, the Bronze to Iron Age saw the first substantial reductions in forest cover

  2. A preliminary contaminant and toxicological survey of Illinois River sediments

    US Fish and Wildlife Service, Department of the Interior — Sediments from 6 sites on the Illinois River adn its tributaries were analyzed for organic and inorganic contaminants. Relative toxicity of sediments was determined...

  3. Sediment transport-based metrics of wetland stability

    Ganju, Neil K.; Kirwan, Matthew L.; Dickhudt, Patrick J.; Guntenspergen, Glenn R.; Cahoon, Donald R.; Kroeger, Kevin D.


    Despite the importance of sediment availability on wetland stability, vulnerability assessments seldom consider spatiotemporal variability of sediment transport. Models predict that the maximum rate of sea level rise a marsh can survive is proportional to suspended sediment concentration (SSC) and accretion. In contrast, we find that SSC and accretion are higher in an unstable marsh than in an adjacent stable marsh, suggesting that these metrics cannot describe wetland vulnerability. Therefore, we propose the flood/ebb SSC differential and organic-inorganic suspended sediment ratio as better vulnerability metrics. The unstable marsh favors sediment export (18 mg L−1 higher on ebb tides), while the stable marsh imports sediment (12 mg L−1 higher on flood tides). The organic-inorganic SSC ratio is 84% higher in the unstable marsh, and stable isotopes indicate a source consistent with marsh-derived material. These simple metrics scale with sediment fluxes, integrate spatiotemporal variability, and indicate sediment sources.

  4. Surficial sediments of the continental shelf off Karnataka

    Hashimi, N.H.; Nair, R.R.

    on the inner shelf. X-ray mineralogy of the silt fraction of the sediments shows the presence of quartz, calcite, aragonite and orthoclase as major minerals. Some of the sedimentary processes effecting the distribution of these sediments are discussed...

  5. Clay minerals in the sediments around the Andaman Islands

    Rao, V.P.

    have different provenances. The Andaman Sea clays are derived largely from the sediments transported by the Irrawady River, while the western side shelf sediments (on the Bay of Bengal side) are derived from the weathering products of the rocks...

  6. Isotopic compositions of boron in sediments and their implications

    Shirodkar, P.V.; Yingkai, X.

    of sediments are mostly closer to the boron isotopic composition of minerals. Such low delta sup(11)B values are attributed to the presence of borates, ulexite and other carbonate minerals in sediments of the salt lakes of Qaidam Basin....

  7. Suspended sediment concentration profiles from synoptic satellite observations

    Ramakrishnan, R.; Rajawat, A.S.; Chauhan, O.S.

    A method is developed to estimate vertical suspended sediment concentration (SSC) profiles in Gulf of Kachchh, from the sediment concentration values derived from synoptic observations of Ocean Colour Monitor (OCM). Under the influence of currents...

  8. Modeling of sediment transport along Mangalore coast using mike 21

    Babu, K.S.; Dwarakish, G.S.; Jayakumar, S.

    The objective of the present study is to understand the sediment transport along Mangalore Coast and to quantify the sediment transport rates. The data used in the present study includes Wave, Wind, Tide, Naval Hydrographic Chart (Bathymetry Chart...

  9. Longshore sediment transport model for the Indian west coast

    Chandramohan, P.; Nayak, B.U.

    Longshore sediment transport rates for the Indian west coast from Cochin to Porbandar are estimated from ship observed wave data (1968 to 1986). The sediment transport rate is relatively high during the southwest monsoon period from June...

  10. Application of remote sensing technology for studying littoral sediment dynamics

    Kunte, P.D.; Wagle, B.G.

    component image were used for area 'A' and 'B' respectively. The behaviour of sediment laden plumes was examined in detail to understand the distribution and dispersion of suspended sediments. Based on tonal and textural variation, five distinct types...


    Sediments dredged from navigable rivers often contain elevated concentrations of recalcitrant, potentially toxic organic compounds such as polychlorinated biphenyls (PCBs) and polyaromatic hydrocarbons (PAHs). The presence of these compounds often requires that the sediments be stored in fully conta...

  12. Characterization of bottom sediments from Osaka Bay, Japan

    Tokunaga, S.; Hoshika, A.; Tatsumoto, H.


    The physical, chemical, and dewatering characteristics of 19 bottom sediments from Osaka Bay, Japan, have been analyzed to aid in the development of sediments in the coastal bay area. The sediments in the east near Osaka Port were highly polluted from the influence of human activities and were difficult to dewater. These sediments were composed of fine particles, low in pH, zetapotential, and initial settling rate, and were high in ignition loss, metal concentrations, compression volume, specific resistance, cake water content, and drying index. However, the sediments near Akashi Channel showed the reverse where they are affected by strong tidal current. A correlation analysis has been made of all the parameters. There are significant relationships between all the dewatering parameters. Therefore, sediments difficult to dewater by gravity settling are also difficult to dewater by vacuum filtration and solar evaporation. Sediments containing fine particles and pollutants are difficult to dewater. Several forms of pollutants can occur in the sediments.

  13. Chemical analysis of sediments from the St. Lawrence River

    US Fish and Wildlife Service, Department of the Interior — This report provides the results of a preliminary study of sediment contaminant levels in the St. Lawrence River. Sediment was sampled at 1 6 different locations...

  14. Climate induced changes in beach morphology and sediment dynamics, Machilipatnam

    Chauhan, O.S.

    The wave climate, littoral current patterns, monthly and seasonal longshore drift rates, beach profile changes, and sediment budget of the beach sediments were determined along Machilipatnam, Andhra Pradesh (India) for the NE, SW monsoons...

  15. Geotechnical properties of surface sediments in the INDEX area

    Khadge, N.H.

    As a part of the environmental impact assessment studies, geotechnical properties of sediments were determined in the Central Indian Basin. The undrained shear strength and index properties of the siliceous sediments were determined on 20 box cores...

  16. Recent planktonic foraminifera from the sediment off Karwar and Mangalore

    Setty, M.G.A.P.; Guptha, M.V.S.

    of planktonic foraminifera from the shore towards the slope, indicative of a regulated sediment discharge and rate of sedimentation in the area. All the species represented are typical warm-water fauna, with one exception. Undoubted, though rare, @i...

  17. A field study on phytoremediation of dredged sediment contaminated by heavy metals and nutrients: the impacts of sediment aeration.

    Wu, Juan; Yang, Lihua; Zhong, Fei; Cheng, Shuiping


    Compared to traditional chemical or physical treatments, phytoremediation has proved to be a cost-effective and environmentally sound alternative for remediation of contaminated dredged sediment. A field study was conducted in a sediment disposal site predominantly colonized by Typha angustifolia under different sediment moisture conditions to estimate the phytoremediation effects of dredged sediment. The moisture content was 37.30 % and 48.27 % in aerated and waterlogged sediment, respectively. Total nitrogen (TN) content was higher in the waterlogged sediment than in the aerated sediment. The total Cd contents were lower in aerated sediment, which was mainly resulted from the lower exchangeable fraction of Cd. The bioaccumulation of P, Cu and Pb in T. angustifolia was promoted by waterlogging, and the belowground tissue concentrations and accumulation factors (AFs) of Cu were higher than that of other metals, which can be explained by that Cu is an essential micronutrient for plants. Consistent with many previous studies, T. angustifolia showed higher metal levels in roots than in above-ground tissues at both the sediment conditions. Due to the improved biomass produced in the aerated sediment, the removals of nutrients and the metals by plant harvest were higher from aerated sediment than from waterlogged sediment. It was indicated that maintaining the dredged sediment aerated can avoid release risk and plant uptake of metals, while the opposite management option can promote phytoextraction of these contaminants.

  18. Prediction of sediment load by sediment rating curve and neural network (ANN) in El Kebir catchment, Algeria

    Z A Boukhrissa; K Khanchoul; Y Le Bissonnais; M Tourki


    The annual sediment load of a river is generally determined either from direct measurements of the sediment load throughout the year or from any of the many sediment transport equations that are available today. Due to lack of a long-term sediment concentration data, sediment rating curves and flux estimation are the most widely applied. This paper has investigated the abilities of statistical models to improve the accuracy of streamflow–suspended sediment relationships in daily and annual suspended sediment estimation. In this study, a comparison was made between suspended sediment rating curves and artificial neural networks (ANNs) for the El Kebir catchment. Daily water discharge and daily suspended sediment data from the gauging station of Ain Assel, were used as inputs and targets in the models which were based on the cascade-forward and feed-forward back-propagation using Levenberg–Marquardt and Bayesian regularization algorithms. The model results have shown that the ANN models have the highest efficiency to reproduce the daily sediment load and the global annual sediment yields. Our estimation based on the available data indicated that the areas along the El Kebir River have experienced high sediment fluxes that could have obvious impacts on the sediment trapping and siltation in the Mexa reservoir.

  19. Effect of sediment particle size on polycyclic aromatic hydrocarbon biodegradation: importance of the sediment-water interface.

    Xia, Xinghui; Wang, Ran


    Mechanisms for the effects of sediment on the biodegradation of organic compounds in the aquatic environment are not clear. In this research, effects of sediment characteristics on biodegradation kinetics of chrysene and benzo[a]pyrene were studied by inoculating polycyclic aromatic hydrocarbon (PAH)-degrading bacteria. Because water and PAHs can pass a polytetrafluoroethylene membrane yet bacteria and sediment cannot, a membrane experiment was performed to compare the biodegradation rates of PAHs in water and at the sediment-water interface, providing direct evidence that the PAH biodegradation rate is enhanced by the presence of sediment. Biodegradation of PAHs in water-sediment systems was fitted to zero-order kinetics; the order of biodegradation rate in water-sediment systems with different sediment was fine silt > clay > coarse silt. Biodegradation of PAHs in water-sediment systems occurred mainly at the sediment-water interface. According to membrane experiment results, when the biodegradation kinetics was fit to a zero-order equation, the maximum specific growth rates of bacteria (1/d) at the sediment-water interface were approximately three- to fourfold those in the water phase. Furthermore, the associated mechanisms regarding the effect of sediment characteristics were analyzed by investigating the process of bacterial growth and the distribution of bacteria and PAHs between water and sediment phases.


    Prabhata K.SWAMEE; Nimisha SWAMEE


    Design equations for minimum area or maximum velocity canal-sections for transport of bulk sediment carried by water have been obtained. Such canals are economically feasible in the terrain where large slopes are available. The design procedure is illustrated by a practical example.

  1. The kinetics of denitrification in permeable sediments

    Evrard, Victor; Glud, Ronnie N.; Cook, Perran L. M.


    on sediments taken from six shallow coastal sites in Port Phillip Bay, Victoria, Australia. The results showed that denitrification commenced rapidly (within 30 min) after the onset of anoxia and the kinetics could be well described by Michaelis-Menten kinetics with half saturation constants (apparent K...

  2. Nitric oxide turnover in permeable river sediment

    Schreiber, Frank; Stief, Peter; Kuypers, Marcel M M


    We measured nitric oxide (NO) microprofiles in relation to oxygen (O2) and all major dissolved N-species (ammonium, nitrate, nitrite, and nitrous oxide [N2O]) in a permeable, freshwater sediment (River Weser, Germany). NO reaches peak concentrations of 0.13 μmol L-1 in the oxic zone and is consumed...

  3. Use of seismic attributes for sediment classification

    Fabio Radomille Santana


    Full Text Available A study to understand the relationships between seismic attributes extracted from 2D high-resolution seismic data and the seafloor's sediments of the surveyed area. As seismic attributes are features highly influenced by the medium through which the seismic waves are propagated, the authors can assume that it would be possible to characterise the geological nature of the seafloor by using these attributes. Herein, a survey was performed on the continental margin of the South Shetland Islands in Antarctica, where both 2D high-resolution seismic data and sediment gravity cores samples were simultaneously acquired. A computational script was written to extract the seismic attributes from the data, which have been statistically analysed with clustering analyses, such as principal components analysis, dendrograms and k-means classification. The extracted seismic attributes are the amplitude, the instantaneous phase, the instantaneous frequency, the envelope, the time derivative of the envelope, the second derivative of the envelope and the acceleration of phase. Statistical evaluation showed that geological classification of the seafloor's sediments is possible by associating these attributes according to their coherence. The methodologies here developed seem to be appropriate for glacio-marine environment and coarse-to-medium silt sediment found in the study area and may be applied to other regions in the same geological conditions.

  4. Copper isotope signatures in modern marine sediments

    Little, Susan H.; Vance, Derek; McManus, James; Severmann, Silke; Lyons, Timothy W.


    The development of metal stable isotopes as tools in paleoceanography requires a thorough understanding of their modern marine cycling. To date, no Cu isotope data has been published for modern sediments deposited under low oxygen conditions. We present data encompassing a broad spectrum of hydrographic and redox regimes, including continental margin and euxinic (sulphide-containing) settings. Taken together with previously published data from oxic settings, these data indicate that the modern oceanic sink for Cu has a surprisingly homogeneous isotopic composition of about +0.3‰ (δ65Cu, relative to NIST SRM976). We suggest that this signature reflects one of two specific water-column processes: (1) an equilibrium isotope fractionation between soluble, isotopically heavy, Cu complexed to strong organic ligands and an isotopically light pool sorbed to particles that deliver Cu to the sediment, or (2) an equilibrium isotope fractionation between the same isotopically heavy ligand-bound pool and the particle reactive free Cu2+ species, with the latter being scavenged by particulates and thereby delivered to the sediment. An output flux of about +0.3‰ into sediments is isotopically light relative to the known inputs to the ocean (at around +0.6‰) and the seawater value of +0.6 to +0.9‰, suggesting the presence of an as yet unidentified isotopically light source of Cu to the oceans. We hypothesize that this source may be hydrothermal, or may result from the partial dissolution of continentally derived particles.

  5. Monitored Natural Recovery at Contaminated Sediment Sites


    sediments, precipitation of solids from the water column, and accumulation of the remains of aquatic biota such as plankton , algae, and aquatic...speciation in clams and seaweed from a contaminated marine environment. Mar. Pollut. Bull. 54:586-594. 15 A P P E N D I X B : C O N T A M I N A N T - S

  6. Investigation of relationship between sediment characteristics and ...


    Sediments are the final sink of heavy metals in the water body. This study examined .... environmental and health issues in many parts of the world affects many ..... erythrinus) tissues from the Eastern Aegean Sea,. Turkey. Water Research, 41(6), 1185-1192. doi: ... United State Environmental Protection Agency,. Office of ...

  7. Influence of estuaries on shelf sediment texture

    Nair, R.R.; Hashimi, N.H.

    on the coast. Offshore from regions where there are a large number of estuaries, the inner shelf sediments are fine grained (average mean size 5.02 phi, 0.03 mm), rich in organic matter ( 2%) and low in calcium carbonate ( 25%). In contrast, in regions...

  8. The hydrological properties of Deltaic sediments

    Ridder, de N.A.


    This paper deals with the hydrological properties of deltaic sediments. A detailed study was made of the geological history of part of the delta plain of the Rhine and Meuse. Such hydrological properties as thickness of aquifers and semi-permeable layers, transmissibility of the aquifers were determ

  9. Contaminated sediment dynamics in peatland headwaters

    Shuttleworth, Emma; Clay, Gareth; Evans, Martin; Hutchinson, Simon; Rothwell, James


    Peatlands are an important store of soil carbon, provide multiple ecosystem services, and when located in close proximity to urban and industrial areas, can also act as sinks of atmospherically deposited heavy metals. The near-surface layer of the blanket peats of the Peak District National Park, UK, is severely contaminated with high concentrations of anthropogenically derived, atmospherically deposited lead (Pb). These peats are severely degraded, and there is increasing concern that erosion is releasing considerable quantities of this legacy pollution into surface waters. Despite substantial research into Pb dynamics in peatlands formal description of the possible mechanisms of contaminated sediment mobilisation is limited. However, there is evidence to suggest that a substantial proportion of contaminated surface sediment may be redistributed elsewhere in the catchment. This study uses the Pb contamination stored near the peat's surface as a fingerprint to trace contaminated sediment dynamics and storage in three severely degraded headwater catchments. Erosion is exposing high concentrations of Pb on interfluve surfaces, and substantial amounts of reworked contaminated material are stored on other catchment surfaces (gully walls and floors). We propose a variety of mechanisms as controls of Pb release and storage on the different surfaces, including: (i) wind action on interfluves; (ii) the aspect of gully walls, and (iii) gully depth. Vegetation also plays an important role in retaining contaminated sediment on all surfaces.

  10. Suspended Sediments Measured in the Surf Zone.


    described by Komar and Inman (1970). Sus- pended sediments were measured in situ by swimmers using a mechanical water sampling device which...PEÜüENC’-1 fH* 39 imt ^^m "/• ffr- 7 If) \\ h A /’ kl v \\ n/\\ i > ^ U, Vectra of onshore-offshore flow vs. nephelcmeter

  11. Sedimentation in a river dominated estuary

    Cooper, JAG


    Full Text Available The Mgeni Estuary on the wave dominated cast coast of South Africa occupies a narrow, bedrock confined, alluvial valley and is partially blocked at the coast by an elongate sandy barrier. Fluvial sediment extends to the barrier and marine depositon...

  12. Chlorinated organic compounds in urban river sediments

    Soma, Y.; Shiraishi, H.; Inaba, K. [National Inst. of Environmental Studies, Tsukuba, Ibaraki (Japan)


    Among anthropogenic chemicals, many chlorinated organic compounds have been used as insecticides and detected frequently as contaminants in urban river sediments so far. However, the number and total amount of chemicals produced commercially and used are increasing year by year, though each amount of chemicals is not so high. New types of contaminants in the environment may be detected by the use of newly developed chemicals. Chlorinated organic compounds in the urban river sediments around Tokyo and Kyoto, large cities in Japan, were surveyed and recent trends of contaminants were studied. Contaminants of the river sediments in industrial areas had a variety, but PCB (polychlorinated biphenyls) was detected in common in industrial areas. Concentration of PCB related well to the number of factories on both sides of rivers, although the use of PCB was stopped 20 years ago. In domestic areas, Triclosan (5-chloro-2-(2,4-dichlorophenoxy)-phenol) and Triclocarban (3,4,4{prime}-trichlorocarbanilide)(both are contained in soap or shampoo for fungicides), p-dichlorobenzene (insecticides for wears) and TCEP(tris-chloroethyl phosphate) were detected. EOX(extracted organic halogen) in the sediments was 5 to 10 times of chlorinated organic compounds detected by GC/MS. Major part of organic halogen was suggested to be included in chlorinated organics formed by bleaching or sterilization.

  13. Par Pond Fish, Water, and Sediment Chemistry

    Paller, M.H. [Westinghouse Savannah River Company, AIKEN, SC (United States); Wike, L.D.


    The objectives of this report are to describe the Par Pond fish community and the impact of the drawdown and refill on the community, describe contaminant levels in Par Pond fish, sediments, and water and indicate how contaminant concentrations and distributions were affected by the drawdown and refill, and predict possible effects of future water level fluctuations in Par Pond.


    Yoganand Balagurunathan


    Full Text Available Sediments are routinely analyzed in terms of the sizing characteristics of the grains of which they are composed. Via sieving methods, the grains are separated and a weight-based size distribution constructed. Various moment parameters are computed from the size distribution and these serve as sediment characteristics. This paper examines the feasibility of a fully electronic granularity analysis using digital image processing. The study uses a random model of three-dimensional grains in conjunction with the morphological method of granulometric size distributions. The random model is constructed to simulate sand, silt, and clay particle distributions. Owing to the impossibility of perfectly sifting small grains so that they do not touch, the model is used in both disjoint and non-disjoint modes, and watershed segmentation is applied in the non-disjoint model. The image-based granulometric size distributions are transformed so that they take into account the necessity to view sediment fractions at different magnifications and in different frames. Gray-scale granulometric moments are then computed using both ordinary and reconstructive granulometries. The resulting moments are then compared to moments found from real grains in seven different sediments using standard weight-based size distributions.

  15. Diversity, Persistence and Evolution in Marine Sediments

    Starnawski, Piotr


    detailed study we were also able to trace not only the same phyla but also the same species from the surface down to the deepest sediment. We’ve described these species as ”persister organisms”, and continued the work on describing them further. By using sequencing and bioinformatics tools we were able...

  16. Mineralogical Signatures in Electrically Coupled Marine Sediments

    Bauermeister, A.; Gorby, Y. A.; Schramm, J.


    'Electric cable bacteria' are organisms of the family Desulfobulbaceaethat exhibit a novel method of electron transport. Cells form conductive filaments that function like electric wires, transferring electrons over distances of more than 1 cm from deep sulfidic sediments to oxygen or other electron acceptors near the soil/water interface. The rate of electron transfer across redox boundaries far exceeds that of diffusion limited processes and generates pH gradients that can significantly influence geochemical reactions, leading to the formation of distinct mineralogical profiles unlikely to be created by abiotic means. Electrically coupled sediments are characterized by carbonate and iron sulfide dissolution reactions occurring at depth and formation of carbonate and metal oxide crusts at the surface, exhibiting a reverse pattern compared to conventional sediment geochemistry. Our research seeks to address the following questions: How prevalent are electric cable bacteria in diverse environments? How do biogeochemical conditions such as ion concentration influence mineral formation? Do biogenic minerals participate in charge transfer? What is the importance of electric charge transfer in the subsurface or other low energy habitats? Can mineral banding patterns caused by cable bacteria activity be preserved in the geologic record? With this research we hope to further elucidate the impact of biologically-induced electric fields on the mineralogy of sediments.

  17. Microplastic particles in sediments from Danish waters

    Strand, Jakob; Lassen, Pia; Shashoua, Yvonne

    Sediment contents of microplastic particles were studied at several areas in Danish coastal and open waters in the North Sea, Skagerrak, Kattegat, Belt Sea and Baltic Sea from 2012. Isolation of microplastic particles were performed after basic digestion of natural organic matter, before applying...

  18. A Sediment Transport Model for Sewers

    Mark, Ole; Larsson, Johan; Larsen, Torben


    This paper describes a mathematical model for transport processes in sewers. The model consists of three sub models, a surface model for the description of the buildup and the washoff of sediment particles from the surface area, a morphological model and an advection-dispersion model. The model...

  19. A Field Exercise in Fluvial Sediment Transport.

    Tharp, Thomas M.


    Describes an investigation which introduces the mathematical principles of stream hydraulics and fluvial sediment in a practical context. The investigation has four stages: defining hydrology of the stream; defining channel hydraulics in a study reach; measuring grain size; and calculating transportable grain size and comparing measure stream-bed…

  20. Organic geochemistry of Dead Sea sediments

    Nissenbaum, A.; Baedecker, M.J.; Kaplan, I.R.


    Four stations in the Dead Sea (representing two shallow oxidizing and two deep reducing environments) were analyzed. The total organic carbon content of the sediment ranged from 0.23 to 0.40 percent. Hydrocarbons, fatty acids, amino acids, humic acids and chlorins were separated and characterized. Of special significance were the following findings: (1) the presence of the isoprenoid hydrocarbons (phytane and pristane) as well as phytanic acid, phytol and dihydrophytol, all thought to be derived from a phosphatidyl glycerophosphate lipid present in halophilic bacteria which populate the water column; (2) a high abundance of unsaturated C-18 fatty acids; (3) presence of apparently unaltered chlorophyll a in the chlorins isolated, but absence of chlorophyll b; and (4) low concentration of humic and fulvic acids in the oxidizing shallow sediments as compared to their concentration in the deeper reducing sediments. It is apparent that the hypersaline environment is conducive for preservation of the organic matter under reducing conditions but not under oxidizing conditions. In the latter case, the organic matter of the sediment is rapidly converted into an insoluble, non-extractable complex.

  1. Irregular dunes, sediment sorting, and river morphodynamics

    Blom, Astrid; Weerts, H.J.T.; Ritsema, I.L; van Os, A.G.


    This research project focuses on modelling the large-scale morphodynamics of low-slope rivers dominated by mixed sediment, such as the Dutch part of the Rhine River. Usually we simply neglect the effects of sorting and variability in dune dimensions on the large-scale morphodynamics. This paper

  2. Heavy metal contamination in TIMS Branch sediments

    Pickett, J.B.


    The objective of this memorandum is to summarize results of previous sediment studies on Tims Branch and Steed's Pond conducted by Health Protection (HP) and by the Savannah River Laboratory (SRL) in conjunction with Reactor Materials Engineering Technology (RMET). The results for other heavy metals, such as lead, nickel, copper, mercury, chromium, cadmium, zinc, and thorium are also summarized.

  3. Heavy metal contamination in TIMS Branch sediments

    Pickett, J.B.


    The objective of this memorandum is to summarize results of previous sediment studies on Tims Branch and Steed`s Pond conducted by Health Protection (HP) and by the Savannah River Laboratory (SRL) in conjunction with Reactor Materials Engineering & Technology (RMET). The results for other heavy metals, such as lead, nickel, copper, mercury, chromium, cadmium, zinc, and thorium are also summarized.

  4. The hydrological properties of Deltaic sediments

    Ridder, de N.A.


    This paper deals with the hydrological properties of deltaic sediments. A detailed study was made of the geological history of part of the delta plain of the Rhine and Meuse. Such hydrological properties as thickness of aquifers and semi-permeable layers, transmissibility of the aquifers were

  5. Leishmania (infantum chagasi in canine urinary sediment

    Ivete Lopes de Mendonça

    Full Text Available Canine visceral leishmaniasis (CVL is difficult to diagnosis, mainly due to the presence of asymptomatic animals, the diversity of clinical symptoms and the difficulty in obtaining diagnostic evidence of high sensitivity and specificity. The purpose of this study was to diagnose CVL in urinary sediment of 70 dogs of different breeds, sexes and ages from the veterinary hospital of the Federal University of Piauí and Zoonosis Control Center of Teresina, Brazil. The serological tests were TR DPP® for CVL and enzyme-linked immunosorbent assay (ELISA for CVL, parasitological exams of bone marrow and lymph nodes and urine sediment cultures. Leishmania was detected in the bone marrow and/or lymph node of 61.0% of the animals (43/70, and urine sediment culture was positive in 9.30% (4/43 of these animals. In the serological exams, 70.0% (49/70 were reactive using the DPP and 78.2% (55/70 were reactive using ELISA. The goal of this study was to diagnose the presence of L. (infantum chagasi in a culture of urinary sediment.

  6. Breaker turbulence and sediment suspension in the surf zone

    Aagaard, Troels; Hughes, Michael G


    Field measurements of fluid velocities and suspended sediment concentrations were used to investigate the relative role of coherent vortices (related to wave breaking) in suspended sediment dynamics. The measurements were obtained from a barred (intermediate-type) beach and the instrument rig was...... between the horizontal fluid velocity and vortex-induced sediment suspension for each of the wave types, which may contribute to an explanation of net offshore and onshore sediment transport observed during episodes of beach erosion and recovery, respectively....

  7. Persistent Organic Pollutants in Soil, Sludge and Sediment

    Vikelsøe, J.; Thomsen, M.; Carlsen, L.;

    Occurrence, sources, geographical distribution, transport and fate of the persistent pollutants PAH, NPE, PAE, PCB, PCN and PBDE was investigated in sludge, soil and sediment in a local environment. Further investigated was the vertical distribution in cores of soils and sediment.......Occurrence, sources, geographical distribution, transport and fate of the persistent pollutants PAH, NPE, PAE, PCB, PCN and PBDE was investigated in sludge, soil and sediment in a local environment. Further investigated was the vertical distribution in cores of soils and sediment....

  8. /sup 137/Cs radioactive dating of Lake Ontario sediment cores

    Ward, T.E.; Breeden, J.; Komisarcik, K.; Porter, R.; Czuczwa, J.; Kaminski, R.; McVeety, B.D.


    The distribution of /sup 137/Cs in sediment cores from Lake Ontario provides estimates of the sediment accumulation rates. Geochronology with /sup 210/Pb dating and distribution of Ambrosia (ragweed) pollen compare well with /sup 137/Cs dating. These methods can determine with precision, changes in sedimentation occurring over the past 100 years or so. Typical sedimentation rates of 0.18-0.36 cm/yr were measured. 16 refs., 3 figs., 2 tabs.

  9. Influence of fine sediment on the fluidity of debris flows

    HOTTA, Norifumi; Kaneko, Takahiro; Iwata, Tomoyuki; Nishimoto, Haruo


    Debris flows include a great diversity of grain sizes with inherent features such as inverse grading, particle size segregation, and liquefaction of fine sediment. The liquefaction of fine sediment affects the fluidity of debris flows, although the behavior and influence of fine sediment in debris flows have not been examined sufficiently. This study used flume tests to detect the effect of fine sediment on the fluidity of laboratory debris flows consisting of particles with various diameters...

  10. Mathematical modeling of sediment transport jn estuaries and coastal regions

    窦国仁; 董凤舞; 窦希萍; 李禔来


    Based on the suspended sediment transport equation and transport capacity formula under the action of tidal currents and wind waves, a horizontal 2-D mathematical model of suspended sediment transport for estuaries and coastal regions is established. The verification of calculations shows that the sediment concentration distribution and sea bed deformation in the estuaries and coastal regions can be successfully simulated. Therefore, a new method for studying and solving the sediment problems in the estuarine and coastal engineering is presented.

  11. Experiment on the Effect of Sediment Concentration on Flow Structure


    The paper studies on the sediment-laden flow by using MicroADV.Laboratory calibration has been conducted to determine the relationship between backscattered signal strength and sediment concentration. Based on the experimental data,the interactions between sediment and fluid in open channel flow are investi- gated.The experiment shows that there exist inner relation between sediment concentration and turbulence, and the relationship is distinctry related to the diameter of particle as well as the flow co...

  12. Worldwide Experience of Sediment Flushing Through Reservoirs

    Muhammad Asif Chaudhry


    Full Text Available Globally there are about 25,500 storage reservoirs with total storage volume of about 6,464 Bcm. The maximum number of reservoirs are in North America, i.e. 7205 with the total storage volume of about 1,844 Bcm, whereas minimum number of reservoirs are in Central Asia, i.e. 44, with the total storage volume of about 148 Bcm. Over the globe, average annual reservoir storage loss due to sedimentation varies from 0.1-2.3%, however, average annual world storage loss is about 1.0%. In order to combat the storage loss, the techniques used globally are: watershed management, dredging of deposited sediments, sediment routing/sluicing, sediment bypassing, density current venting and sediment flushing through reservoir, separately and also in combination. Each approach has its own limitations, depending on the site conditions. Sediment flushing technique is used by two ways i.e. Drawdown flushing and Emptying and Flushing. In Emptying and Flushing, the reservoir is emptied before the flood season, resulting in the creation of river-like flow conditions in the reservoir. The flow velocities in the reservoir are increased to such an extent that deposited sediments are remobilized and transported through the low level outlets provided slightly above the original riverbed level with sufficient flow capacity. Flushing is not a new technique and has been experienced for the last 6 decades on several reservoirs of the world. The results of the study reveal that there are about 50 reservoirs which are flushed, out of which flushing data is available for about 22 reservoirs only. However 6 reservoirs have been found with successful application of flushing operation and all other are flushed with low flushing efficiency. Flushing has been successfully implemented at Baira-India, Gebidem-Switzerland, Gmund-Austria, Hengshan-China, Palagnedraswitzerland, Santo-Domingo-Venezuela Reservoirs, while the unsuccessfully flushed reservoirs are: Chinese reservoirs, Gaunting


    The Split Core Sampler for Submerged Sediments (Split Core Sampler) designed and fabricated by Arts Manufacturing & Supply, Inc., was demonstrated under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation Program in April and May 1999 at ...

  14. Microphytobenthos and benthic macroalgae determine sediment organic matter composition in shallow photic sediments

    Hardison, A.K.; Canuel, E.A/; Anderson, I.C.; Tobias, C.R.; Veuger, B.; Waters, M.N.


    Microphytobenthos and benthic macroalgae play an important role in system metabolism within shallow coastal bays. However, their independent and interactive influences on sediment organic matter (SOM) are not well understood. We investigated the influence of macroalgae and microphytobenthos on SOM

  15. Coupling climate conditions, sediment sources and sediment transport in an alpine basin

    Rainato, Riccardo; Picco, Lorenzo; Cavalli, Marco; Mao, Luca; Neverman, Andrew J.; Tarolli, Paolo


    In a fluvial system, mountain basins control sediment export to the lowland rivers. Hence, the analysis of the erosion processes and sediment delivery patterns that act in mountain basins is important. Several studies have investigated the alterations triggered by recent climatic change on the hydrological regime, whilst only a few works have explored the consequences on the sediment dynamics. Here we combined and analyzed the quasi-unique dataset of climatic conditions, landscape response, and sediment export produced, since 1986 in the Rio Cordon basin (5 km2, Eastern Italian Alps) to examine the sediment delivery processes occurring in the last three decades. The temperature, precipitation, and fluvial sediment fluxes in the basin were analyzed using continuous measurement executed by a permanent monitoring station, while the landscape evolution was investigated by three sediment source inventories established in 1994, 2006, and 2016. Thus, the analysis focused on the trends exhibited during the periods 1986-1993, 1994-2006, and 2007-2015. In terms of climatic conditions, three distinct climate forcing stages can be observed in the periods analyzed: a relatively stable phase (1986-1993), a period characterized by temperature and rainfall fluctuations (1994-2006), and a more recent warmer and wetter phase (2007-2015). In the 1986-1993 period, the fluvial sediment fluxes reflected the stable trend exhibited by the climatic conditions. In the subsequent 1994-2006 period, the average temperature and precipitation were in line with that previously observed, although with higher interannual variability. Notwithstanding the climate forcing and the occurrence of high magnitude/low frequency floods that strongly influenced the source areas, between 1994 and 2006 the Rio Cordon basin showed relatively limited erosion activity. Hence, the climatic conditions and the landscape response can only partially explain the strong increase of sediment export recorded in the 1994

  16. Geophysical Constraints on Sediment Dispersal Systems

    Johnstone, Elizabeth Anne Carruthers

    Geophysical and geological approaches were employed to understand sediment dispersal systems and their response to various forcing functions (i.e., sea level fluctuations, tectonic deformation, sediment supply, and climate change). Two end member marine environments were studied; one with high precipitation and sediment discharge (Gulf of Papua, Papua New Guinea) and the other with low precipitation and sediment discharge (Oceanside Littoral Cell). The high-sedimentation rate in the Gulf of Papua (GoP) yields high-fidelity records of Earth history. As part of the NSF Margins Source-to-Sink (S2S) program, we acquired CHIRP and core data across the GoP continental shelf that complemented onshore and offshore research in the region. CHIRP seismic data imaged three Holocene sedimentary lobes. The older Central lobe is downlapped by two younger lobes to the north and south. Sediment analysis showed that the older Central lobe has an elemental signature similar to the younger Northern lobe with both sourced from the Purari River watershed and lobe migration appears to be climatically controlled. The Southern lobe has elemental signatures more consistent with the Fly River watershed. Our results suggest the northern rivers began depositing sediments on the shelf during the Holocene sea level rise in the central region of the GoP and migrated abruptly north at ~2 kybp. Conversely, during the early Holocene transgression, sediments in the Fly drainage system were sequestered onshore infilling accommodation created in the large low-relief coastal plain during the sea level rise. Upon infilling the onshore accommodation, the Fly River delivered sediment to the ocean and formed the Southern lobe. Such differences in onshore storage capacity may introduce a lag between low-gradient rivers (Type I) with a large coastal plain versus high-gradient river systems (Type II) with small coastal plains. The second study site is in the sediment-starved Oceanside Littoral Cell (OCL) of

  17. Sediment transport along the Goa-north Karnataka Coast, western India

    Kunte, P.D.

    of sediment transport. Although sediment-transport direction is bi-directional, net major sediment transport is southward. The geomorphic study identified possible sediment sources and sinks. Contributions of sources and losses due to sinks are assessed...

  18. Sediment fluxes and the littoral drift along northeast Andhra Pradesh Coast, India: Estimation by remote sensing

    Kunte, P.D.; Alagarsamy, R.; Hursthouse, A.S.

    estimation of suspended sediments was undertaken to understand the magnitude and direction of movement of sediment fluxes. The study revealed that: (1) the character of coastal landforms and sedimentation processes indicate that the sediment transport...

  19. In Situ Sediment Treatment Using Activated Carbon: A Demonstrated Sediment Cleanup Technology

    Patmont, Clayton R; Ghosh, Upal; LaRosa, Paul; Menzie, Charles A; Luthy, Richard G; Greenberg, Marc S; Cornelissen, Gerard; Eek, Espen; Collins, John; Hull, John; Hjartland, Tore; Glaza, Edward; Bleiler, John; Quadrini, James


    This paper reviews general approaches for applying activated carbon (AC) amendments as an in situ sediment treatment remedy. In situ sediment treatment involves targeted placement of amendments using installation options that fall into two general approaches: 1) directly applying a thin layer of amendments (which potentially incorporates weighting or binding materials) to surface sediment, with or without initial mixing; and 2) incorporating amendments into a premixed, blended cover material of clean sand or sediment, which is also applied to the sediment surface. Over the past decade, pilot- or full-scale field sediment treatment projects using AC—globally recognized as one of the most effective sorbents for organic contaminants—were completed or were underway at more than 25 field sites in the United States, Norway, and the Netherlands. Collectively, these field projects (along with numerous laboratory experiments) have demonstrated the efficacy of AC for in situ treatment in a range of contaminated sediment conditions. Results from experimental studies and field applications indicate that in situ sequestration and immobilization treatment of hydrophobic organic compounds using either installation approach can reduce porewater concentrations and biouptake significantly, often becoming more effective over time due to progressive mass transfer. Certain conditions, such as use in unstable sediment environments, should be taken into account to maximize AC effectiveness over long time periods. In situ treatment is generally less disruptive and less expensive than traditional sediment cleanup technologies such as dredging or isolation capping. Proper site-specific balancing of the potential benefits, risks, ecological effects, and costs of in situ treatment technologies (in this case, AC) relative to other sediment cleanup technologies is important to successful full-scale field application. Extensive experimental studies and field trials have shown that when

  20. Sediment source fingerprinting to quantify fine sediment sources in forested catchments, Chile.

    Schuller, P.; Walling, D. E.; Iroume, A.; Castillo, A.; Quilodran, C.


    A study to improve the understanding of the primary sediment sources and transfer pathways in catchments disturbed following forest plantation harvesting is being undertaken in South-Central Chile. The study focuses on two sets of paired experimental catchments (treatment and control), located about 400 km apart, with similar soil type but contrasting mean annual rainfall: Nacimiento (1,200 mm year-1) and Los Ulmos (2,500 mm year-1). Sediment source fingerprinting techniques are being used to document the primary fine sediment sources. In each catchment, three potential sediment sources were defined: clearcut slopes (Z1), forest roads (Z2) and the stream channel (Z3). In each catchment, multiple representative composite samples of the different potential source materials were collected before harvest operations from the upper 1 cm layer in Z1, Z2, and from the channel bank and bed for Z3. A time-integrating trap sampler installed in the discharge monitoring station constructed at the outlet of each catchment has been used to collect samples of the suspended sediment and these have been supplemented by sediment collected from the weir pools. Total suspended sediment load is been quantified in the monitoring stations using discharge records and integrated water sampling. Caesium-137 (137Cs), excess lead-210 (210Pbex) and other sediment properties are being used as fingerprints. After air-drying, oven-drying at 40°C and disaggregation, both the source material samples and the sediment samples collected in the discharge monitoring stations were sieved through a 63-μm sieve and the <63-μm fractions were used for subsequent analyses. For radionuclide assay, the samples were sealed in Petri dishes and after 4 weeks the mass activity density (activity concentration) of 137Cs and 210Pbex was determined by gamma analysis, using an ORTEC extended range Ge detector of 53% relative efficiency. The 137Cs and 210Pbex activity and organic carbon (Corg) concentration associated

  1. Elements patterns of soil and river sediments as a tracer of sediment migration

    Dordevic, Dragana; Pétursdóttir, Þórunn; Halldórsson, Guðmundur; Sakan, Sanja; Škrivalj, Sandra; Finger, David Christian


    Iceland is the small island on the mid Atlantic ridge, with strong natural catastrophes, such as floods, droughts, landslides, storms and volcanic eruptions that can have devastating impacts on natural and build environment. Rangárvellir area next to Mt Hekla and the glacier Tindfjallajökul has impacted by severe erosion processes but also rich of surface water that play a crucial role in sediment transport processes in the watersheds of the two rivers Eystri-Rangá and Ytri-Rangá. Their sediments consist of various materials originating from volcanoes ash and lava. Difference of contents of various chemical components in sediments and surrounding soil could be bases for identification of erosion processes and watersheds connectivity. River sediment is accumulator of chemical constituents from water in water-sediment interaction, making it as an important material for investigation their migration routes. In order to develop of methods for investigating of sediment migration using their chemical patterns the STSM of Connecteur COST Action ES1306-34336 have been approved. Samples of river sediments and surrounding soils of the Eystri-Rangá and Ytri-Rangá rivers in watersheds of Rangárvellir area as well as primarily volcanic ash from Eyafjallajökull were taken. Sequential extraction of heavy metals and trace elements from collected samples has been applied using the optimized procedure proposed by European Community Bureau of reference (BCR) in the next fractions: 1) soluble in acid - metals that are exchangeable or associated with carbonates; 2) reducible fraction - metals associated with oxides of Fe and Mn; 3) oxidizable fraction - metals associated with organic matter and sulfides and 4) residual fraction - metals strongly associated with the crystalline structure of minerals. Extracted solutions have analyzed by ICP/OES on next elements: Al, As, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Li, Mg, Mn, Na, Ni, P, Pb, S, Sb, Si, Sr, V, Zn. Distributions

  2. Improved understanding of Diatom stratigraphy in a varved sediment through lake monitoring and sediment trap data

    Maier, Dominique Beatrice; Bigler, Christian


    Biological remains in lake sediments reflect past conditions in the lake itself and within its catchment. However, it is difficult to disentangle to which extent the environmental drivers are natural (e.g. population dynamics, climate) or human-induced (e.g. agriculture, forestry). Therefore, comprehensive lake monitoring is crucial to understand taphonomy and sediment formation, and enhances the value of the paleolimnological archive. In this study, we analyze survey data of a varved lake in northern Sweden (Nylandssjön, Nordingrå) with special focus on the diatom record. Different monitoring components are combined, i.e. (1) bi-weekly data of chemical parameters (chlorophyll a, nutrients) covering the period from 2012 to 2015, (2) physical parameters (temperature, oxygen, ice-cover) covering the period from 2000-2015, (3) high-resolution data from a sequential sediment trap covering the period from 2000-2015 and (4) annually resolved diatom data from the sediment varves. Early and intense spring mixing in 2012 translates into a short but vertically pervasive chlorophyll a band which is simultaneously recorded in the sequential trap with a high diatom peak (500 000 valves cm2 d-1). The years 2013 and 2014 show higher chlorophyll a concentrations in the water column, but diatoms do not form a peak flux (>100 000 diatoms cm2 d-1) at any time in the sediment trap, probably due to stratification patterns. The trap record from 2012 indicates a spring bloom dominating the sediment signal, but this is not repeated in 2013 and 2014. Future analyses will be directed towards linking the monitored in-lake processes to annually or even seasonally resolved environmental characteristics. The multiplicity of potential ecological and environmental drivers led us to reverse our analytical view by starting with the diatom stratigraphy in the varved sediment, continuing through the data from sediment trap and water column into the lake catchment to identify deviations (timing

  3. Magneto-chemotaxis in sediment: first insights.

    Xuegang Mao

    Full Text Available Magnetotactic bacteria (MTB use passive alignment with the Earth magnetic field as a mean to increase their navigation efficiency in horizontally stratified environments through what is known as magneto-aerotaxis (M-A. Current M-A models have been derived from MTB observations in aqueous environments, where a >80% alignment with inclined magnetic field lines produces a one-dimensional search for optimal living conditions. However, the mean magnetic alignment of MTB in their most widespread living environment, i.e. sediment, has been recently found to be <1%, greatly reducing or even eliminating the magnetotactic advantage deduced for the case of MTB in water. In order to understand the role of magnetotaxis for MTB populations living in sediment, we performed first M-A observations with lake sediment microcosms. Microcosm experiments were based on different combinations of (1 MTB position with respect to their preferred living depth (i.e. above, at, and below, and (2 magnetic field configurations (i.e. correctly and incorrectly polarized vertical fields, horizontal fields, and zero fields. Results suggest that polar magnetotaxis is more complex than implied by previous experiments, and revealed unexpected differences between two types of MTB living in the same sediment. Our main findings are: (1 all investigated MTB benefit of a clear magnetotactic advantage when they need to migrate over macroscopic distances for reaching their optimal living depth, (2 magnetotaxis is not used by all MTB under stationary, undisturbed conditions, (3 some MTB can rely only on chemotaxis for macroscopic vertical displacements in sediment while other cannot, and (4 some MTB use a fixed polar M-A mechanisms, while other can switch their M-A polarity, performing what can be considered as a mixed polar-axial M-A. These observations demonstrate that sedimentary M-A is controlled by complex mechanical, chemical, and temporal factors that are poorly reproduced in aqueous

  4. Terrestiral plant biopolymers in marine sediments

    Gough, M.A.; Fauzi, R.; Mantoura, C. (Plymouth Marine Lab. (United Kingdom)); Preston, M. (Univ. of Liverpool (United Kingdom))


    The vascular land plant biopolymers lignin and cutin were surveyed in the surface sediments of coastal and open ocean waters by controlled alkaline CuO oxidation/reaction. Two contrasting oceanic regimes were studied: the northwest Mediterranean (NWM) Sea, which receives significant particulate terrigenous debris through riverine discharge; and the northeast Atlantic (NEA) Ocean, with poorly characterized terrestrial carbon inputs. In the NWM products of lignin and cutin co-occurred at all stations, elevated levels (ca. 0.5-3.0 mg lignin phenols/100 mg organic carbon; ca. 0.01-0.09 mg cutin acids/100 mg organic carbon) were observed for near-shore deltaic and shelf sediments. The influence of terrestrial land plant inputs extended across the shelf and through the slope to the abyssal plain, providing molecular evidence for advective offshore transfer of terrestrial carbon. Mass balance estimates for the basin suggest riverine inputs account for the majority of surface sedimentary ligin/cutin, most of which (>90%) is deposited on the shelf. Products of CuO oxidation of lignin and cutin were also detected in NEA surface sediments, at levels comparable to those observed for the NWM continental slope, and were detectable at low concentrations in the sediments of the abyssal plains (>4,000 m depth). While atmospheric deposition of lignin/cutin-derived material cannot be discounted in this open ocean system, lateral advective transfer of enriched shelf sediments is inferred as a possible transport process. A progressive enrichment in cutin-derived material relative to lignin was observed offshore, with evidence of an increase in the degree of oxidative alteration of lignin residues. Preliminary mass balance calculations applied to the global ocean margin suggest riverine sources of both particulate lignin and cutin are important and that most (>95%) deposition of recognizable land plant biopolymers occurs in shelf seas. 74 refs., 7 figs., 5 tabs.

  5. Sediment Distribution on Skeidararsandur, Southeast Iceland.

    Gomez, B.; Russell, A. J.; Finnegan, D. C.; Smith, L. C.; Knudsen, O.


    The zone of outwash accumulation is perhaps the most distinctive feature of the proglacial environment. Its gross morphology is determined by the topography of the proglacial zone, the volume of the sediment input, and the processes responsible for sediment distribution. The largest unconfined, active outwash plain on Earth, Skeidararsandur, extends seawards across the coastal plain of southeastern Iceland. Investigations of the proximal surface of Skeidararsandur using a variety of data sources, including Landsat Thematic Mapper imagery, Synthetic Aperture Radar data, Airborne Topographic Mapper laser altimeter data and high-resolution aerial photography, have provided a synoptic perspective of the proglacial drainage system. Over the past 50 yr Skeidararjokull has become decoupled from the sandur and the original, highly diffuse, multipoint distubutary system, inactive remnants of which are preserved on the sandur's proximal surface, has been transformed into an integrated drainage network, with only three primary outlets. These entrenched channels constrain jokulhlaups and ablation dominated flows alike, and permit most meltwater to bypass the proximal surface. The shift from a diffuse to a channelized (point source) distributary system has had a significant impact on the magnitude and style of sedimentation throughout the proximal zone, and also on the size of sediment supplied to the sandur. Stratigraphic evidence suggests both jokulhlaups and glacier surges have a significant influence on the development of the fluvial succession in the proximal zone, but a diffuse, multipoint distributary system is required to sustain active accretion across the sandur as a whole. The contemporary meltwater distributary system on Skeidararsandur, which is a product of glacier retreat, may thus represent one end of the spectrum of channel configurations that facilitate sediment distribution on sandar.

  6. Sediment Management Methods to Reduce Dredging: Part 2, Sediment Collector Technology


    ensure that unauthorized personnel do not gain access to the material management equipment (separator and stacker). The 6 ft tall fence around the...Approved for public release; distribution is unlimited. ERDC TN-DOER-T13 April 2017 Sediment Management Methods to Reduce Dredging: Part 2...DOER) Program technical note (TN) is the second in a series evaluating sediment management methods to reduce dredging through a research task (RT

  7. A Hydrograph-Based Sediment Availability Assessment: Implications for Mississippi River Sediment Diversion

    Timothy Rosen


    Full Text Available The Mississippi River Delta Plain has undergone substantial land loss caused by subsidence, relative sea-level rise, and loss of connectivity to the Mississippi River. Many restoration projects rely on diversions from the Mississippi River, but uncertainty exists about the timing and the amount of actually available sediment. This study examined long-term (1980–2010 suspended sediment yield as affected by different hydrologic regimes to determine actual suspended sediment availability and how this may affect diversion management. A stage hydrograph-based approach was employed to quantify total suspended sediment load (SSL of the lower Mississippi River at Tarbert Landing during three river flow conditions: Peak Flow Stage (stage = 16.8 m, discharge >32,000 m3 s−1, High Flow Stage (stage = 14.6 m, discharge = 25,000–32,000 m3 s−1, and Intermediate Flow Stage (Stage = 12.1 m, discharge = 18,000–25,000 m3 s−1. Suspended sediment concentration (SSC and SSL were maximized during High Flow and Intermediate Flow Stages, accounting for approximately 50% of the total annual sediment yield, even though duration of the stages accounted for only one-third of a year. Peak Flow Stage had the highest discharge, but significantly lower SSC (p < 0.05, indicating that diversion of the river at this stage would be less effective for sediment capture. The lower Mississippi River showed significantly higher SSC (p < 0.0001 and SSL (p < 0.0001 during the rising than the receding limb. When the flood pulse was rising, Intermediate Flow and High Flow Stages showed greater SSC and SSL than Peak Flow Stage. Together, Intermediate Flow and High Flow Stages on the rising limb annually discharged 28 megatonnes over approximately 42 days, identifying this to be the best period for sediment capture and diversion.

  8. Sediment Transport on Continental Shelves: Storm Bed Formation and Preservation in Heterogeneous Sediments


    2007) Sediment-transport modeling on Southern Californian shelves: A ROMS case study. Cont. Shelf Res., 27, 832-853. Butman, B., Noble, M. and...Seas. /. Phys. Oceanogr., 19, 1039-1059. Hampson, G. J. (2010) Sediment dispersal and quantitative stratigraphic architecture across an ancient...shelf. Sedimentology, 57, 96-141. Hampson, G.J. (2000) Discontinuity surfaces, clinoforms, and facies architecture in a wave-dominated, shoreface

  9. Sediment storage dam: A structural gully erosion control and sediment trapping measure, northern Ethiopia

    Mekonnen, Mulatie; Keesstra, Saskia; Baartman, Jantiene; Ritsema, Coen


    Gully erosion is a prime problem in Ethiopia. This study assessed the severity of gully erosion and the role of sediment storage dams (SSD) in restoring gullies and preventing further gully development, its sediment trapping efficacy (STE) and its capacity in converting degraded gully lands to productive land. On average 2.5 m deep, 6.6 m wide and 28.3 m long gullies were formed in Minizr watershed, northwest Ethiopia, in 2013. Concentrated surface runoff, traditional ditches, graded terraces without suitable water ways and road construction are the main causes of such serious gully erosion. Over grazing, tunnel flow and lack of proper immediate gully treatment actions after gully initiation are found to be additional causes of the problem. Gully erosion was also found as the major source of sediment for downstream rivers and water reservoirs. The annual volume of soil eroded from only four gullies was 1941.3 m3. To control gully erosion, SSDs were found to be important physical structures, which can trap significant amount of sediment within gullies and they can convert unproductive gully land to productive agricultural land for fruit and crop production. Eight SSDs trapped about 44*103 m3 of sediment within 2 to 8 years. Two representative SSDs constructed using gabion and stone were tested for their STE. Results showed that their efficacy was 74.1% and 66.4% for the gabion and stone SSDs, respectively. Six of the older SSDs were already full of sediment and created 0.75 ha of productive land within 2 to 8 years. SSDs best fits to treat large size and deep gullies where other gully control measures, check dams, could not function well. To prevent gully formation, controlling its causes that is avoiding traditional ditches, practicing grassed water ways to safely remove runoff water from graded terraces, integrated watershed and road side management practices are important solutions. KEY WORDS: Sediment storage dam, gully erosion, sediment trapping efficacy

  10. A Guide for Using Geochemical Methods in Dredged Material, Sediment Tracking, and Sediment Budget Studies


    ER D C TR -1 7- 3 Dredging Operations and Environmental Research Program A Guide for Using Geochemical Methods in Dredged Material...Jennifer M. Seiter, Mark A . Chappell, and Brandon Lafferty June 2017 Approved for public release; distribution is unlimited. The U.S. Army...June 2017 A Guide for Using Geochemical Methods in Dredged Material, Sediment Tracking, and Sediment Budget Studies Heidi M. Wadman Coastal and

  11. Effects of Sediment Composition on Growth of Submersed Aquatic Vegetation


    weight loss on ignition. Total sediment carbon and Inorganic carbon were determined directly using a Leco carbon analyzer. Humus fractions (fulvic...and huinic acids) were quantified spectrophotometrically following a series of acid-base extractions of wet sediment ( Stevenson 1982). Sediment... Humus fractions (fulvic and humic acids), non- humic organic matter, and total Kjeldahl nitrogen (TKN) were all positively and significantly

  12. Equilibrium sampling for a thermodynamic assessment of contaminated sediments

    of the biota relative to the sediment. Furthermore, concentrations in lipid at thermodynamic equilibrium with sediment (Clip?Sed) can be calculated via lipid/silicone partition ratios CSil × KLip:Sil, which has been done in studies with limnic, river and marine sediments. The data can then be compared to lipid...

  13. Sediment Bioaccumulation Test with Lumbriculus variegatus: Effects of Organism Loading

    Sediment bioaccumulation tests with Lumbriculus variegatus were performed on seven sediments with a series of ratios of total organic carbon in sediment to L. variegatus (dry weight) (TOC/Lv) that spanned the recommendation of no less than 50:1. With increasing loading of organi...

  14. Contaminant variability in a sedimentation area of the river Rhine.

    Winkels, H.J.


    Aquatic sediments in sedimentation zones of major rivers are in general sinks for pollutants. The sedimentation zone Ketelmeer/IJsselmeer is an important sink for contaminants of the river Rhine (i.e. river IJssel). Recent and historical pollution interact here. Redistribution of suspended solids an

  15. Riparian Sediment Delivery Ratio: Stiff Diagrams and Artifical Neural Networks

    Various methods are used to estimate sediment transport through riparian buffers and grass jilters with the sediment delivery ratio having been the most widely applied. The U.S. Forest Service developed a sediment delivery ratio using the stiff diagram and a logistic curve to int...

  16. Variations in sediment properties, Skeffling mudflat, Humber Estuary, UK

    Paterson, D.M.; Tolhurst, T.J.; Kelly, J.; Honeywill, C.; De Deckere, E.; Shayler, S.A.; Black, K.S.; de Brouwer, J.F.C.; Davidson, I.


    The generic importance of biogenic mediation of sediment erosion and transport is a matter of debate and a multidisciplinary approach is required to investigate biologically mediated mechanisms of sediment stability. Biogenic influence on sediment behaviour can be inferred from a variety of correlat

  17. Sediment bioaccumulation test with Lumbriculus variegatus: Effects of feeding

    Sediment bioaccumulation tests with Lumbriculus variegatus were performed on seven sediments with a series of ratios of total organic carbon in sediment to L. variegatus (dry weight) (TOC/Lv) that spanned the recommendation of no less than 50:1. With increasing loading of organi...

  18. Post-disturbance sediment recovery: Implications for watershed resilience

    Sara L. Rathburn; Scott M. Shahverdian; Sandra E. Ryan


    Sediment recovery following disturbances is a measure of the time required to attain pre-disturbance sediment fluxes. Insight into the controls on recovery processes and pathways builds understanding of geomorphic resilience.We assess post-disturbance sediment recovery in three small (1.5-100 km2), largely unaltered watersheds within the northern Colorado...

  19. Sediment concentration and turbidity changes during culvert removals

    Randy B. Foltz; Kristina A. Yanosek; Timothy M. Brown


    The concentrations of sediment and turbidity in stream water were monitored during culvert removals to determine the short term effects of road obliteration. Sediment concentration was measured at 11 stream crossings among two locations in Idaho and one in Washington. Sediment concentration immediately below the culvert outlet exceeded levels above the culvert outlet...

  20. Riparian Sediment Delivery Ratio: Stiff Diagrams and Artifical Neural Networks

    Various methods are used to estimate sediment transport through riparian buffers and grass jilters with the sediment delivery ratio having been the most widely applied. The U.S. Forest Service developed a sediment delivery ratio using the stiff diagram and a logistic curve to int...

  1. 21 CFR 864.6700 - Erythrocyte sedimentation rate test.


    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Erythrocyte sedimentation rate test. 864.6700... (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Manual Hematology Devices § 864.6700 Erythrocyte sedimentation rate test. (a) Identification. An erythrocyte sedimentation rate test is a device that...

  2. Heavy metal concentrations and toxicity in water and sediment from stormwater ponds and sedimentation tanks.

    Karlsson, Kristin; Viklander, Maria; Scholes, Lian; Revitt, Mike


    Sedimentation is a widely used technique in structural best management practices to remove pollutants from stormwater. However, concerns have been expressed about the environmental impacts that may be exerted by the trapped pollutants. This study has concentrated on stormwater ponds and sedimentation tanks and reports on the accumulated metal concentrations (Cd, Cr, Ni, Pb, and Zn) and the associated toxicity to the bacteria Vibrio fischeri. The metal concentrations are compared with guidelines and the toxicity results are assessed in relation to samples for which metal concentrations either exceed or conform to these values. The water phase metal concentrations were highest in the ponds whereas the sedimentation tanks exhibited a distinct decrease towards the outlet. However, none of the water samples demonstrated toxicity even though the concentrations of Cu, Pb, and Zn exceeded the threshold values for the compared guidelines. The facilities with higher traffic intensities had elevated sediment concentrations of Cr, Cu, Ni, and Zn which increased towards the outlet for the sedimentation tanks in agreement with the highest percentage of fine particles. The sediments in both treatment facilities exhibited the expected toxic responses in line with their affinity for heavy metals but the role of organic carbon content is highlighted.

  3. Effects of sediment on the dynamic pressure of water and sediment on dams


    After a reservoir has been in operation for a period of time,a sediment layer is likely formed before the dam. Since studies of the effects of sediment layers on the hydrodynamic pressures of impounded water and the aseismic responses of dam are few,the dynamic effect of sediment may be applied neither in the seismic design of new dams nor in the assessment of earthquake safety of existing dams. However,a common practice of the action of sediment layers and foundation is based on a partial energy absorption boundary. It is shown that during a vertical harmonic ground motion,the sediment layer could alter the natural frequencies of reservoir. The dynamic pressure on a rigid vertical dam face caused by the vertical ground motion is obtained through a computational model and an experimental test by using a shaking table. With a change in the thickness of sediment,the frequency corresponding to the inertia amplification effect appears to vary gradually. The results are useful for further study of seismic responses of dams.

  4. Effect of sediment size on bioleaching of heavy metals from contaminated sediments of Izmir Inner Bay

    Duyusen E.Guven; Gorkem Akinci


    The effect of sediment size on metals bioleaching from bay sediments was investigated by using fine (< 45 μm),medium (45-300 μm),and coarse (300-2000μm) size fractions of a sediment sample contaminated with Cr,Cu,Pb,and Zn.Chemical speciation of the metals in bulk and size fractions of sediment were studied before and after bioleaching.Microbial activity was provided with mixed cultures of Acidithiobacillus thiooxidans and Acidithiobacillusferrooxidans.The bioleaching process was carried out in flask experiments for 48 days,by using 5% (W/V) of solid concentration in suspension.Bioleaching was found to be efficient for the removal of selected heavy metals from every size fraction of sediments,where the experiments with the smaller particles resulted in the highest solubilization ratios.At the end of the experimental period,Cr,Cu,Pb and Zn were solubilized to the ratios of 68%,88%,72%,and 91% from the fine sediment,respectively.Higher removal efficiencies can be explained by the larger surface area provided by the smaller particles.The changes in the chemical forms of metals were determined and most of the metal releases were observed from the reducible and organic fractions independent from grain size.Higher concentrations were monitored in the residual fraction after bioleaching period,suggesting they are trapped in this fraction,and cannot be solubilized under natural conditions.

  5. Sediment dynamics in the Mekong basin- a multi-objective calibration on discharge and sediment load

    Luedtke, Stefan; Apel, Heiko; Viet Dung, Nguyen; Merz, Bruno


    The Mekong delta is one of the most extensively used deltas world wide and provides natural resources to more than 17 million people. Environmental issues in the Mekong delta are closely linked to water usage and availability. In addition, the sediment input to the floodplains during the annual flood plays a crucial role in terms of nutrient supply to agriculture. Since flood magnitudes and sediment delivery are driven by human activities and hydrological processes along the entire Mekong river, it is highly important to assess the dynamics upstream of the Mekong delta. This study applies the hydrological model SWIM to the watershed upstream of Kratie/Cambodia with a size of approximately 650.000 km2 and gives a quantitative depiction on the sediment and discharge dynamics. The model is driven by different, mostly globally available data sources. After the identification of the sensitive parameters, a multi objective calibration, namely the NSGA-II algorithm, is applied. The model simulates the discharge values well, e.g. by capturing the annual flood season and sediment dynamics. The next steps comprise an assessment of different sources of uncertainty that are incorporated in the model. This includes the climate input data and the sparsely available and highly variable sediment data. Eventually, the study shall provide a basis to examine the future developments along the Mekong river, for example, quantifying the impacts of potential reservoirs on the flow regime and sediment dynamics.

  6. Algal Turf Sediments and Sediment Production by Parrotfishes across the Continental Shelf of the Northern Great Barrier Reef.

    Tebbett, Sterling B; Goatley, Christopher H R; Bellwood, David R


    Sediments are found in the epilithic algal matrix (EAM) of all coral reefs and play important roles in ecological processes. Although we have some understanding of patterns of EAM sediments across individual reefs, our knowledge of patterns across broader spatial scales is limited. We used an underwater vacuum sampler to quantify patterns in two of the most ecologically relevant factors of EAM sediments across the Great Barrier Reef: total load and grain size distribution. We compare these patterns with rates of sediment production and reworking by parrotfishes to gain insights into the potential contribution of parrotfishes to EAM sediments. Inner-shelf reef EAMs had the highest sediment loads with a mean of 864.1 g m-2, compared to 126.8 g m-2 and 287.4 g m-2 on mid- and outer-shelf reefs, respectively. High sediment loads were expected on inner-shelf reefs due to their proximity to the mainland, however, terrigenous siliceous sediments only accounted for 13-24% of total mass. On inner-shelf reef crests parrotfishes would take three months to produce the equivalent mass of sediment found in the EAM. On the outer-shelf it would take just three days, suggesting that inner-shelf EAMs are characterised by low rates of sediment turnover. By contrast, on-reef sediment production by parrotfishes is high on outer-shelf crests. However, exposure to oceanic swells means that much of this production is likely to be lost. Hydrodynamic activity also appears to structure sediment patterns at within-reef scales, with coarser sediments (> 250 μm) typifying exposed reef crest EAMs, and finer sediments (< 250 μm) typifying sheltered back-reef EAMs. As both the load and grain size of EAM sediments mediate a number of important ecological processes on coral reefs, the observed sediment gradients are likely to play a key role in the structure and function of the associated coral reef communities.

  7. Determining the sources of fine-grained sediment using the Sediment Source Assessment Tool (Sed_SAT)

    Gorman Sanisaca, Lillian E.; Gellis, Allen C.; Lorenz, David L.


    A sound understanding of sources contributing to instream sediment flux in a watershed is important when developing total maximum daily load (TMDL) management strategies designed to reduce suspended sediment in streams. Sediment fingerprinting and sediment budget approaches are two techniques that, when used jointly, can qualify and quantify the major sources of sediment in a given watershed. The sediment fingerprinting approach uses trace element concentrations from samples in known potential source areas to determine a clear signature of each potential source. A mixing model is then used to determine the relative source contribution to the target suspended sediment samples.The computational steps required to apportion sediment for each target sample are quite involved and time intensive, a problem the Sediment Source Assessment Tool (Sed_SAT) addresses. Sed_SAT is a user-friendly statistical model that guides the user through the necessary steps in order to quantify the relative contributions of sediment sources in a given watershed. The model is written using the statistical software R (R Core Team, 2016b) and utilizes Microsoft Access® as a user interface but requires no prior knowledge of R or Microsoft Access® to successfully run the model successfully. Sed_SAT identifies outliers, corrects for differences in size and organic content in the source samples relative to the target samples, evaluates the conservative behavior of tracers used in fingerprinting by applying a “Bracket Test,” identifies tracers with the highest discriminatory power, and provides robust error analysis through a Monte Carlo simulation following the mixing model. Quantifying sediment source contributions using the sediment fingerprinting approach provides local, State, and Federal land management agencies with important information needed to implement effective strategies to reduce sediment. Sed_SAT is designed to assist these agencies in applying the sediment fingerprinting

  8. Isolation of enteroviruses from water, suspended solids, and sediments from Galveston Bay: survival of poliovirus and rotavirus adsorbed to sediments.

    Rao, V. C.; Seidel, K M; Goyal, S M; Metcalf, T. G.; Melnick, J L


    The distribution and quantitation of enteroviruses among water, suspended solids, and compact sediments in a polluted estuary are described. Samples were collected sequentially from water, suspended solids, fluffy sediments (uppermost layer of bottom sediments), and compact sediment. A total of 103 samples were examined of which 27 (26%) were positive for virus. Polioviruses were recovered most often, followed by coxsackie B viruses and echoviruses 7 and 29. Virus was found most often attache...

  9. A manual to identify sources of fluvial sediment

    Gellis, Allen; Fitzpatrick, Faith; Schubauer-Berigan, Joseph


    Sediment is an important pollutant of concern that can degrade and alter aquatic habitat. A sediment budget is an accounting of the sources, storage, and export of sediment over a defined spatial and temporal scale. This manual focuses on field approaches to estimate a sediment budget. We also highlight the sediment fingerprinting approach to attribute sediment to different watershed sources. Determining the sources and sinks of sediment is important in developing strategies to reduce sediment loads to water bodies impaired by sediment. Therefore, this manual can be used when developing a sediment TMDL requiring identification of sediment sources.The manual takes the user through the seven necessary steps to construct a sediment budget:Decision-making for watershed scale and time period of interestFamiliarization with the watershed by conducting a literature review, compiling background information and maps relevant to study questions, conducting a reconnaissance of the watershedDeveloping partnerships with landowners and jurisdictionsCharacterization of watershed geomorphic settingDevelopment of a sediment budget designData collectionInterpretation and construction of the sediment budgetGenerating products (maps, reports, and presentations) to communicate findings.Sediment budget construction begins with examining the question(s) being asked and whether a sediment budget is necessary to answer these question(s). If undertaking a sediment budget analysis is a viable option, the next step is to define the spatial scale of the watershed and the time scale needed to answer the question(s). Of course, we understand that monetary constraints play a big role in any decision.Early in the sediment budget development process, we suggest getting to know your watershed by conducting a reconnaissance and meeting with local stakeholders. The reconnaissance aids in understanding the geomorphic setting of the watershed and potential sources of sediment. Identifying the potential

  10. Sediment rarefaction resuspension and contaminant release under tidal curren- ts

    程鹏达; 朱红伟; 钟宝昌; 王道增


    Based on experiment in tidal flume, this paper analyzes the sediment rarefactive phenomenon and hydraulic characteristics of sediment resuspension with different physical properties under the effect of tidal current. According to this experiment, sediment resuspension is related to the hydraulic characteristics of overlying water and its own dry density, namely the moisture content of sediment and deposition time. Generally, river sediment can be classified into the upper layer of floating sludge and lower layer of deposit sediment. Incipient velocity goes higher as the sediment layer goes thicker. Based on the experiment, incipient velocity formula of sediment can be obtained. There is a cohesive force among natural fine sediment whose resuspension is almost irrelevant to their diameters. Therefore, the critical incipient velocity is determined by the cohesive force instead of particle diameter. The lower layer of deposit sediment is generally not so easy to start up. And it will be rarified and release into the overlying water when contacting with overlying water. However, this rarefaction release velocity is gentle and slow. Under the same flow condition, annual loss amount of lower layer deposited sediment is about one fifth of upper layer of floating sediment. Flow velocity of tidal river and variation of the water level are asymmetrical, both of which vary under different tidal cycles. During long tidal cycle, flow velocity and water level change in the same phase and amplitude with tide. During the whole ebb and flow, flow direction does not change as the water level goes under the influence of acceleration and deceleration. As the tide cycle increases, the incipient velocity of sediment goes higher. This means that the long period tide cycle plays buffer effect on the resuspension of sediment, which makes the sediment not so easy both to start up and to suspend.

  11. Surficial sediment distribution and the associated net sediment transport pattern in the Pearl River Estuary, South China

    Zhang, W.; Zheng, J.H.; Ji, X.M.; Hoitink, A.J.F.; van der Vegt, M.


    Spatial variations in grain-size parameters contain information on sediment transport patterns. Therefore, in this study, 106 surficial sediment samples taken from the Pearl River Estuary (PRE), South China, were analyzed, to better understand the net sediment transport pattern in this region. The P

  12. Prediction of Suspended Sediment in Rivers Using Artificial Neural Networks: Implications for Development of Sediment Budgets

    Hamshaw, S. D.; Underwood, K.; Rizzo, D.; Wemple, B. C.; Dewoolkar, M.


    Over 1,000 river miles in Vermont are either impaired or stressed by excessive sedimentation. The higher streamflows and incised river channels have resulted in increased bed and bank erosion. As the climate in Vermont is expected to feature greater and more frequent precipitation events and winter rainfall, the potential for increased sediment loading from erosion processes in the watershed and along the channel are high and a major concern for water resource managers. Typical sediment monitoring comprises periodic sampling during storm events and is often limited to gauged streams with flow data. Continuous turbidity monitoring enhances our understanding of river dynamics by offering high-resolution, temporal measurements to better quantify the total sediment loading occurring during and between storm events. Artificial neural networks, that mimic learning patterns of the human brain, have been effective at predicting flow in small, ungauged rivers using local climate data. This study advances this technology by using an ANN algorithm known as a counter-propagation neural network (CPNN) to predict discharge and suspended sediment in small streams. The first distributed network of continuous turbidity sensors (DTS-12) was deployed in Vermont in the Mad River Watershed, located in Central Vermont. The Mad River and five tributaries were selected as a test bed because seven years of periodic turbidity sampling data are available, it represents a range of watershed characteristics, and because the watershed is also being used for hydrologic model development using the Distributed-Hydrology-Soils-Vegetation Model (DHSVM). Comparison with the DHSVM simulations will allow estimation of the most-likely sources of sediment from the entire watershed and individual subwatersheds. In addition, recent field studies have commenced the quantification of erosion occurring from unpaved roads and streambanks in the same watershed. Periodic water quality sampling during storm

  13. Testing modelled hillslope sediment production using a low cost sediment trap

    Borombovits, Daniel; Brooks, Andrew; Spencer, John; Pietsch, Tim; Olley, Jon


    This presentation seeks to describe the design and evaluation of a simple, low cost Hillslope Sediment Trap (HST) suitable for deployment in remote arid and semi-arid environments as detailed in a paired submission by Brooks et al. (currently under review, Catena S-13-00775 and S-13-00776). The HSTs consist of a robust, fenced enclosure from which a geofabric barrier is hung and attached to the ground, forming a wall and apron section, which is extended upslope in a U or V shape, depending on slope angle. Key considerations of the HST design include cost, ease of field transportation and construction, and low maintenance during deployment, as well as hydraulic considerations such as conductivity, effective filtration threshold for single and consecutive events, and overall sediment retention within the traps. The sediment trapping efficiency of the HSTs was tested through a series of laboratory flume experiments which showed that the traps will accurately sample the full particle size distribution of sediment mobilised on a given hillslope, with a suspended sediment (streams which drain into the Great Barrier Reef Lagoon. Using the empirical sediment yield data collected by the HSTs allowed the development of a locally calibrated hillslope erosion model, providing far more realistic predictions of erosion than have previously been employed. Total sediment yield was measured in 11 plots ranging in size from 0.1 to 1.9 ha across four main geologies in the Normanby catchment, with results ranging between 0.03 - 256 kg/ha/yr across two distinctly different wet seasons. When compared to the RUSLE modelled sediment yields determined for the same sites, plot scale metrics together provided values ranging from 1550 - 331730 kg/ha/yr. Depending on which modelled data is used, this represents an average ratio of over prediction by the RUSLE model (cf the measured rates for the same period) of between 12 to 13333 times. Reasons for the over-prediction are discussed in Brooks

  14. Petroleum biodegradation studied in sediment-flow-through systems simulating natural oil seepage in marine sediments

    Mishra, Sonakshi; Wefers, Peggy; Steeb, Philip; Schmidt, Mark; Treude, Tina


    The natural biodegradation of hydrocarbons depends on several environmental factors like nutrients, salinity, temperature, pressure, redox-conditions and composition of crude oil. Petroleum migrating from depth into marine surface sediments at natural seep sites could be subjected to a sequence of different kind of microbial processes which is controlled by a strong redox gradient within a thin sediment segment. Most studies on microbial degradation of petroleum have focused either only on selected hydrocarbon fractions or on cultured microbes. This study, however, attempts to investigate the natural microbial response of marine sediments to crude oil seepage with detailed analysis of sediment and porewater geochemistry, hydrocarbon degradation products, microbial activity, and microbial genetics. A sediment-oil-flow-through-system was established where crude oil migrated through the bottom of (approximately 30 cm long) intact marine sediment cores simulating a natural seepage scenario. Electron acceptor-rich oxic seawater was provided at the top of the core and anoxic conditions were established at the bottom of the cores. The intact sediment cores had been sampled from the Caspian Sea (near Baku) and the North Alex Mud Volcano in the Mediterranean Sea. The Caspian Sea and the North Alex Mud Volcano are both sites with active transport of hydrocarbons from depth by mud volcano activity. The geochemical changes in the sediment cores during oil seepage were monitored by using microelectrodes and porewater analyses. The geochemical analysis was later followed by hydrocarbon and molecular analyses at the end of the experiment by slicing the cores. First results based on the biogeochemistry of the sediment cores and hydrocarbon analyses are presented here. Porewater profiles of hydrogen sulfide and sulfate during the experimental runs gave first indications of microbial response and sulfate reduction due to the addition of crude oil. The core from North Alex Mud

  15. Diagenetic regimes in Arctic Ocean sediments: Implications for sediment geochemistry and core correlation

    Meinhardt, A.-K.; März, C.; Schuth, S.; Lettmann, K. A.; Schnetger, B.; Wolff, J.-O.; Brumsack, H.-J.


    Dark brown sediment layers are a potential stratigraphic tool in Quaternary Arctic Ocean sediments. They are rich in Mn, Fe, and trace metals scavenged from the water column and were most likely deposited during interglacial intervals. In this study, we combine sediment and pore water data from sediment cores taken in different parts of the Arctic Ocean to investigate the influence of early diagenetic processes on sediment geochemistry. In most studied cores, Mn, Co, and Mo are released into the pore waters from Mn oxide dissolution in deeper (>1.5 m) sediment layers. The relationship between sedimentary Mn, Co, and Mo contents in excess of the lithogenic background (elementxs) shows that Coxs/Moxs values are a diagnostic tool to distinguish between layers with diagenetic metal addition from the pore waters (Coxs/Moxs 10), and unaffected layers (Coxs/Moxs from 1 to 10). Steady-state calculations based on current pore water profiles reveal that in the studied cores, the diagenetic addition of these metals from the pore water pool alone is not sufficient to produce the sedimentary metal enrichments. However, it seems evident that dissolution of Mn oxides in the Mn reduction zone can permanently alter the primary geochemical signature of the dark brown layers. Therefore, pore water data and Coxs/Moxs values should be considered before core correlation when this correlation is solely based on Mn contents and dark sediment color. In contrast to the mostly non-lithogenic origin of Mn in the dark brown layers, sedimentary Fe consists of a large lithogenic (80%) and a small non-lithogenic fraction (20%). Our pore water data show that diagenetic Fe remobilization is not currently occurring in the sediment. The dominant Fe sources are coastal erosion and river input. Budget calculations show that Fe seems to be trapped in the modern Arctic Ocean and accumulates in shelf and basin sediments. The Fe isotopic signal δ56Fe of the solid phase is positive (∼0.2-0.3‰) in

  16. Estimating the fluvial sediment input to the coastal sediment budget: A case study of Ghana

    Boateng, Isaac; Bray, Malcolm; Hooke, Janet


    Knowledge of fluvial sediment supply to the coastal sediment budget is important for the assessment of the impacts on coastal stability. Such knowledge is valuable for designing coastal engineering schemes and the development of shoreline management planning policies. It also facilitates understanding of the connection between rivers in the hinterland and adjoining coastal systems. Ghana's coast has many fluvial sediment sources and this paper provides the first quantitative assessments of their contributions to the coastal sediment budget. The methods use largely existing data and attempt to cover all of Ghana's significant coastal rivers. Initially work was hindered by insufficient direct measured data. However, the problem was overcome by the application of a regression approach, which provides an estimated sediment yield for non-gauged rivers based on data from gauged rivers with similar characteristics. The regression approach was effective because a regional coherence in behaviour was determined between those rivers, where direct measured data were available. The results of the assessment revealed that Ghana's coast is dissected by many south-draining rivers, stream and lagoons. These rivers, streams and lagoons supply significant amounts of sediment to coastal lowlands and therefore contribute importantly to beaches. Anthropogenic impoundment of fluvial sediment, especially the Akosombo dam on the Volta River, has reduced the total fluvial sediment input to the coast from about 71 × 10 6 m 3/a before 1964 (pre-Akosombo dam) to about 7 × 10 6 m 3/a at present (post-Akosombo dam). This sharp reduction threatened the stability of the east coast and prompted an expensive ($83 million) defence scheme to be implemented to protect 8.4 km-long coastline at Keta. Sections of Ghana's coast are closely connected to the hinterland through the fluvial sediment input from local rivers. Therefore, development in the hinterland that alters the fluvial sediment input from

  17. Sorption behavior of o-nitrophenol on marine sediment

    YANG Guipeng; WU Ping; KONG Dexin


    Systematic study on sorption behavior of o-nitrophenol on marine sediments was conducted.Isotherms of sorption of o-nitrophenol on marine sediments could be described by Freundlich model; and the isotherm of sorption of o-nitrophenol on HCl-treated sediment could be described by Langmuir model. The sorption behavior was affected by various factors including organic carbon content, aqueous solution salinity,temperature, and acidity. The sorption amount of o-nitrophenol increased when salinity and acidity of the aqueous solution increase, but decreased with increasing temperature. Organic carbon content in sediments had apparent effect on the behavior except for HCl-treated sediments.

  18. Dispersal of fine sediment in nearshore coastal waters

    Warrick, Jonathan A.


    Fine sediment (silt and clay) plays an important role in the physical, ecological, and environmental conditions of coastal systems, yet little is known about the dispersal and fate of fine sediment across coastal margin settings outside of river mouths. Here I provide simple physical scaling and detailed monitoring of a beach nourishment project near Imperial Beach, California, with a high portion of fines (40% silt and clay by weight). These results provide insights into the pathways and residence times of fine sediment transport across a wave-dominated coastal margin. Monitoring of the project used physical, optical, acoustic, and remote sensing techniques to track the fine portion of the nourishment sediment. The initial transport of fine sediment from the beach was influenced strongly by longshore currents of the surf zone that were established in response to the approach angles of the waves. The mean residence time of fine sediment in the surf zone—once it was suspended—was approximately 1 hour, and rapid decreases in surf zone fine sediment concentrations along the beach resulted from mixing and offshore transport in turbid rip heads. For example, during a day with oblique wave directions and surf zone longshore currents of approximately 25 cm/s, the offshore losses of fine sediment in rips resulted in a 95% reduction in alongshore surf zone fine sediment flux within 1 km of the nourishment site. However, because of the direct placement of nourishment sediment on the beach, fine suspended-sediment concentrations in the swash zone remained elevated for several days after nourishment, while fine sediment was winnowed from the beach. Once offshore of the surf zone, fine sediment settled downward in the water column and was observed to transport along and across the inner shelf. Vertically sheared currents influenced the directions and rates of fine sediment transport on the shelf. Sedimentation of fine sediment was greatest on the seafloor directly offshore

  19. Methane Recovery from Hydrate-bearing Sediments

    J. Carlos Santamarina; Costas Tsouris


    Gas hydrates are crystalline compounds made of gas and water molecules. Methane hydrates are found in marine sediments and permafrost regions; extensive amounts of methane are trapped in the form of hydrates. Methane hydrate can be an energy resource, contribute to global warming, or cause seafloor instability. This study placed emphasis on gas recovery from hydrate bearing sediments and related phenomena. The unique behavior of hydrate-bearing sediments required the development of special research tools, including new numerical algorithms (tube- and pore-network models) and experimental devices (high pressure chambers and micromodels). Therefore, the research methodology combined experimental studies, particle-scale numerical simulations, and macro-scale analyses of coupled processes. Research conducted as part of this project started with hydrate formation in sediment pores and extended to production methods and emergent phenomena. In particular, the scope of the work addressed: (1) hydrate formation and growth in pores, the assessment of formation rate, tensile/adhesive strength and their impact on sediment-scale properties, including volume change during hydrate formation and dissociation; (2) the effect of physical properties such as gas solubility, salinity, pore size, and mixed gas conditions on hydrate formation and dissociation, and it implications such as oscillatory transient hydrate formation, dissolution within the hydrate stability field, initial hydrate lens formation, and phase boundary changes in real field situations; (3) fluid conductivity in relation to pore size distribution and spatial correlation and the emergence of phenomena such as flow focusing; (4) mixed fluid flow, with special emphasis on differences between invading gas and nucleating gas, implications on relative gas conductivity for reservoir simulations, and gas recovery efficiency; (5) identification of advantages and limitations in different gas production strategies with

  20. Sediment contaminant surveillance in Milford Haven Waterway.

    Little, D I; Bullimore, B; Galperin, Y; Langston, W J


    Sediment contaminants were monitored in Milford Haven Waterway (MHW) since 1978 (hydrocarbons) and 1982 (metals), with the aim of providing surveillance of environmental quality in one of the UK's busiest oil and gas ports. This aim is particularly important during and after large-scale investment in liquefied natural gas (LNG) facilities. However, the methods inevitably have changed over the years, compounding the difficulties of coordinating sampling and analytical programmes. After a review by the MHW Environmental Surveillance Group (MHWESG), sediment hydrocarbon chemistry was investigated in detail in 2010. Natural Resources Wales (NRW) contributed their MHW data for 2007 and 2012, collected to assess the condition of the Special Area of Conservation (SAC) designated under the European Union Habitats Directive. Datasets during 2007-2012 have thus been more comparable. The results showed conclusively that a MHW-wide peak in concentrations of sediment polycyclic aromatic hydrocarbons (PAHs), metals and other contaminants occurred in late 2007. This was corroborated by independent annual monitoring at one centrally located station with peaks in early 2008 and 2011. The spatial and temporal patterns of recovery from the 2007 peak, shown by MHW-wide surveys in 2010 and 2012, indicate several probable causes of contaminant trends, as follows: atmospheric deposition, catchment runoff, sediment resuspension from dredging, and construction of two LNG terminals and a power station. Adverse biological effects predictable in 2007 using international sediment quality guidelines were independently tested by data from monitoring schemes of more than a decade duration in MHW (starfish, limpets) and in the wider SAC (grey seals). Although not proving cause and effect, many of these potential biological receptors showed a simultaneous negative response to the elevated 2007 contamination following intense dredging activity in 2006. Wetland bird counts were typically at a peak in

  1. Tolerance of freshwater test organisms to formulated sediments for use as control materials in whole-sediment toxicity tests

    Kemble, N.E.; Dwyer, F.J.; Ingersoll, C.G. [Geological Survey, Columbia, MO (United States). Environmental and Contaminants Research Center; Dawson, T.D. [Integrated Laboratory Systems, Duluth, MN (United States); Norberg-King, T.J. [Environmental Protection Agency, Duluth, MN (United States). Mid-Continent Ecological Div.


    A method is described for preparing formulated sediments for use in toxicity testing. Ingredients used to prepare formulated sediments included commercially available silt, clay, sand, humic acid, dolomite, and {alpha}-cellulose (as a source of organic carbon). {alpha}-Cellulose was selected as the source of organic carbon because it is commercially available, consistent from batch to batch, and low in contaminant concentrations. The tolerance of freshwater test organisms to formulated sediments for use as control materials in whole-sediment toxicity testing was evaluated. Sediment exposures were conducted for 10 d with the amphipod Hyalella azteca, the midges Chironomus riparius and C. tentans, and the oligochaete Lumbriculus variegatus and for 28 d with H. azteca. Responses of organisms in formulated sediments was compared with a field-collected control sediment that has routinely been used to determine test acceptability. Tolerance of organisms to formulated sediments was evaluated by determining responses to varying levels of {alpha}-cellulose, to varying levels of grain size, to evaluation of different food types, or to evaluation of different sources of overlying water. In the 10-d exposures, survival of organisms exposed to the formulated sediments routinely met or exceeded the responses of test organisms exposed to the control sediment and routinely met test acceptability criteria required in standard methods. Growth of amphipods and oligochaetes in 10-d exposures with formulated sediment was often less than growth of organisms in the field-collected control sediment. Additional research is needed, using the method employed to prepare formulated sediment, to determine if conditioning formulated sediments before starting 10-d tests would improve the growth of amphipods. In the 28-d exposures, survival of H. azteca was low when reconstituted water was used as the source of overlying water. However, when well water was used as the source of overlying water in

  2. Two-dimensional sediment transport modeling for reservoir sediment management: Reventazón River, Costa Rica

    Dubinski, I. M.


    Sedimentation is an ongoing concern for reservoirs that may be addressed using a variety of sediment management options. Sedimentation in reservoirs reduces reservoir storage and alters the sediment supply downstream. The objective of this study is to estimate the spatial and temporal distribution of deposited sediment in a proposed reservoir in the Reventazón River, Costa Rica over long-term operation (40 years) under different sediment management scenarios. The two-dimensional sediment transport model MIKE 21C by DHI is used to simulate sediment deposition for the base case (i.e., no sediment management) and assess the anticipated effectiveness of two sediment management strategies (i.e., full drawdown flushing and partial drawdown flushing). Incoming total sediment load is estimated using measured and estimated suspended sediment load combined with bed load estimated using the BAGS model with the Wilcock and Crowe (2003) equation. The base case simulation indicates that the anticipated storage loss in the absence of sediment management would amount to about 35% of the total and 33% of the active storage volume over a 40-year period. The predicted storage losses are significantly less when the performance of full drawdown flushing and partial drawdown flushing was simulated. In the case of full drawdown flushing the total anticipated storage loss is about 22%, while the loss in active storage is only 7%. In the case of partial drawdown flushing the predicted loss in total storage is 26%, while the anticipated loss in active storage is 8% after 40 years of operation. The simulations indicate that flushing is a viable and sustainable sediment management option for maintaining active storage in the proposed reservoir and passing through sediment.

  3. Modelling sediment export, retention and reservoir sedimentation in drylands with the WASA-SED model

    E. N. Mueller


    Full Text Available Current soil erosion and reservoir sedimentation modelling at the meso-scale is still faced with intrinsic problems with regard to open scaling questions, data demand, computational efficiency and deficient implementations of retention and re-mobilisation processes for the river and reservoir networks. To overcome some limitations of current modelling approaches, the semi-process-based, spatially semi-distributed modelling framework WASA-SED (Vers. 1 was developed for water and sediment transport in large dryland catchments. The WASA-SED model simulates the runoff and erosion processes at the hillslope scale, the transport and retention processes of suspended and bedload fluxes in the river reaches and the retention and remobilisation processes of sediments in reservoirs. The modelling tool enables the evaluation of management options both for sustainable land-use change scenarios to reduce erosion in the headwater catchments as well as adequate reservoir management options to lessen sedimentation in large reservoirs and reservoir networks. The model concept, its spatial discretisation scheme and the numerical components of the hillslope, river and reservoir processes are described and a model application for the meso-scale dryland catchment Isábena in the Spanish Pre-Pyrenees (445 km2 is presented to demonstrate the capabilities, strengths and limits of the model framework. The example application showed that the model was able to reproduce runoff and sediment transport dynamics of highly erodible headwater badlands, the transient storage of sediments in the dryland river system, the bed elevation changes of the 93 hm3 Barasona reservoir due to sedimentation as well as the life expectancy of the reservoir under different management options.

  4. Role of sediment resuspension in the remobilization of particulate-phase metals from coastal sediments

    Kalnejais, Linda H.; Martin, William R.; Signell, Richard P.; Bothner, Michael H.


    The release of particulate-phase trace metals due to sediment resuspension has been investigated by combining erosion chamber experiments that apply a range of shear stresses typically encountered in coastal environments with a shear stress record simulated by a hydrodynamic model. Two sites with contrasting sediment chemistry were investigated. Sediment particles enriched in silver, copper, and lead, 4−50 times greater than the bulk surface-sediment content, were the first particles to be eroded. As the shear-stress level was increased in the chamber, the total mass eroded increased, but the enrichment of these trace metals fell, approaching the bulk-sediment content. From the temporal distribution of shear stress generated by the hydrodynamic model for a site in Boston Harbor, resuspension fluxes were estimated. The erosion threshold of this site is exceeded during spring tides, releasing the particles enriched in trace metals into the water column. Due to the higher trace metal content and the regularity of resuspension, low-energy resuspension events (up to a shear stress of 0.2 N/m2) contribute up to 60% of the resuspension metal flux in an average year. The estimated annual quantity of copper and lead resuspended into the water column is higher than estimates of the total riverine flux for these metals. These results indicate that sediment resuspension is a very important mechanism for releasing metals into the water column and provide new insight into the chemical and physical processes controlling the long-term fate of trace metals in contaminated sediments.

  5. Mercury fluxes through the sediment water interface and bioavailability of mercury in southern Baltic Sea sediments

    Jacek Bełdowski


    Full Text Available Sediment cores collected in several areas of the southern Baltic were analysed for total mercury (HgTOT and five operationally defined mercury fractions: HgA - contained in pore waters, HgF - bound to fulvic acids, HgH - bound to humic acids, HgS - bound to sulphide, and HgR - residual. An effort was made to quantify mercury fluxes at the sediment/water interface in the study area. Net mercury input, calculated on the basis of sedimentation rate and concentration in the uppermost sediments, ranged from 1 to 5.5 ng cm-2 year-1. Mercury remobilisation from sediments due to diffusion and resuspension was calculated from the proportion of labile mercury and the velocity of near-bottom currents. The results showed that the return soluble and particulate fluxes of mercury from the sediments to the water column constitute a substantial proportion of the input (20-50%, and are slightly higher than those found in pristine areas, although they are less than the values recorded in areas with a history of mercury contamination. In addition, an index was developed to assess the methylation potential of mercury in sediments. Mercury contained in pore waters, and mercury bound to fulvic and humic acids together with Loss on Ignition were used to calculate the semi-quantitative methylation potential (Pm. Despite the simplicity of this approach, Pm correlates well with methyl mercury in fish from the study area.full, complete article (PDF - compatibile with Acrobat 4.0, 291.3 kB

  6. Transport simulation of sorptive contaminants considering sediment-associated processes

    LI Ruijie; LU Shasha; ZHENG Jun


    Sediment-associated processes,such as sediment erosion,deposition,and pore water diffusion/advection affect sorptive contaminant transport.By considering these processes,we developed an equation to simulate contaminant transport.Erosion and deposition processes are considered as erosion and deposition fluxes of sediment,and adsorption-desorption processes of contaminants by sediment are simulated using the Langmuir Equation.Pore water diffusion is calculated based on the contaminant concentration gradient across the sediment-water interface.Pore water advection is estimated using pore water contained in the sediments of erosion flux.The equation is validated to simulate total phosphorus concentrations in Guanhe estuary in the northern Jiangsu,China.The simulated total phosphorus concentrations show better agreement with field observations compared to estimations that do consider sediment-associated processes.


    Wenxue LI; Jixiang LIU; Zhanwei WAN


    Small runoff, large sediment load, and incompatible relationship of flow and sediment load are very important characteristics of the Yellow River. They are also the crux of the most prominent problems of the Yellow River. To solve these problems, the regimes of flow and sediment load have to be improved by increasing water, reducing sediment load, and by using reservoirs to regulate flow and sediment load. The results of experiments for regulating the flow and sediment load in the last three years by the Xiaolangdi Reservoir have indicated that this measure is a realistic and effective way to mitigate the prominent problems in flood control of the Lower Yellow River at present and in the near future. However, the regulation system is still imperfect. It is advisable to speed up the pace of research and construction of the system for regulating flow and sediment load.




    Laboratory experiments on longitudinal dispersion in clear-water and sediment-laden open channel flows are reported. Data from these experiments and those available from previous studies indicate that the suspended sediment present in the flow affects the longitudinal dispersion process. The observed velocity distributions over the depth of sediment-laden flows indicate that the velocity deviates from the mean velocity more in sediment-laden flows than in clear-water flows. The velocity distributions over the cross section and secondary flow in the channel are also expected to be altered due to the presence of suspended sediments in the flow. For these reasons, more dispersion is found in sediment-laden flows than in corresponding clear-water flows. A predictor for the dispersion coefficient in sediment-laden flows is proposed.


    CHEN Bin; WANG Kai


    Based on the Estuarine, Coastal and Ocean Modeling System with Sediments (ECOMSED) model, a 3-D hydrodynamic-transport numerical model was established for the offshore area near the Yangtze Estuary in the East China Sea .The hydrodynamic module was driven by tide and wind. Sediment module included sediment resuspension, transport and deposition of cohesive and non-cohesive sediment. The settling of cohesive sediment in the water column was modeled as a function of aggregation (flocculation) and deposition. The numerical results were compared with observation data for August, 2006. It shows that the sediment concentration reduces gradually from the seashore to the offshore area. Numerical results of concentration time series in the observation stations show two peaks and two valleys, according with the observation data. It is mainly affected by tidal current. The suspended sediment concentration is related to the tidal current during a tidal cycle, and the maximum concentration appears 1 h-4 h after the current maximum velocity has reached.

  10. Ecotoxicological evaluation of sediments applied to environmental forensic investigation

    R. H. Alves

    Full Text Available Abstract The present study aimed to evaluate the potential for using toxicity assays with sediment samples for the detection of water pollution caused by the discharge of tannery effluents into water bodies and its application to environmental forensic investigation. The study included ecotoxicological evaluation of sediments, survey of benthic organisms in the field, as well as chromium, cadmium and lead dosage which provided data for a sediment quality triad evaluation. The sediment samples showed acute and chronic toxicity to the bioindicators, low biodiversity of benthic macrofauna and high chromium concentration, reaching up to 4365 mg.Kg–1. A close relationship was observed between the separate results of ecotoxicological sediment evaluation and the sediment quality triad. The sediment ecotoxicological assessment proved to be applicable to tracking sources of contamination related to tanneries and similar activities in environmental forensics.

  11. Formation of siliceous sediments in brandy after diatomite filtration.

    Gómez, J; Gil, M L A; de la Rosa-Fox, N; Alguacil, M


    Brandy is quite a stable spirit but sometimes light sediment appears. This sediment was separated and analysed by IR and SEM-EDX. It was revealed that the sediment is composed mostly of silica and residual organic matter. Silica was present as an amorphous phase and as microparticles. In an attempt to reproduce the formation of the sediment, a diatomite extract was prepared with an ethanol/water mixture (36% vol.) and a calcined diatomite similar to that used in brandy filtration. This extract was added to unfiltered brandy in different amounts. After 1 month, the Si concentration decreased in all samples and sediments with similar compositions and features to those found in the unstable brandy appeared. The amounts of sediment obtained were directly related to the decrease in Si concentration in solution. Consequently, it can be concluded that siliceous sediment in brandy originates from Si released during diatomite filtration. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Ecotoxicological evaluation of sediments applied to environmental forensic investigation.

    Alves, R H; Rietzler, A C


    The present study aimed to evaluate the potential for using toxicity assays with sediment samples for the detection of water pollution caused by the discharge of tannery effluents into water bodies and its application to environmental forensic investigation. The study included ecotoxicological evaluation of sediments, survey of benthic organisms in the field, as well as chromium, cadmium and lead dosage which provided data for a sediment quality triad evaluation. The sediment samples showed acute and chronic toxicity to the bioindicators, low biodiversity of benthic macrofauna and high chromium concentration, reaching up to 4365 mg.Kg-1. A close relationship was observed between the separate results of ecotoxicological sediment evaluation and the sediment quality triad. The sediment ecotoxicological assessment proved to be applicable to tracking sources of contamination related to tanneries and similar activities in environmental forensics.

  13. Sediments Contamination with Organic Micropollutants: Current State and Perspectives

    Popenda, Agnieszka; Włodarczyk-Makuła, Maria


    This study focused on the sediment contamination with some organic micropollutants based on the monitoring data together with available literature in Poland. The following persistent organic pollutants (POPs): polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and chlorinated pesticides (CP) were characterized in sediments with respect to current legislations in force. Based on accessible data, higher PAHs, PCBs and CP concentrations were found in river sediments than in lake sediments. Especially, sediments of the Oder River and its tributary in the southern part of Poland, were highly polluted. In order to minimize the risk of the secondary pollution of surface waters, it is necessary to introduce consolidated management system with sediments proceeding. Furthermore, it is also of great importance to elaborate specific regulations concerning conditions of sediments management.

  14. Transport and distribution of bottom sediments at Pirita Beach

    Soomere, Tarmo


    Full Text Available The basic factors affecting sediment supply for and transport processes at Pirita Beach, a sandy section of the south­eastern coast of Tallinn Bay, are analysed. Observations of bathymetry, sediment properties and sources, sediment transport processes and their changes arising from coastal engineering activities are reported. The mean grain size is about 0.12 mm, with the fine sand fraction (0.063–0.125 mm accounting for about 77% of the sediments. Coarse sand dominates only along the waterline. The content of coarser sediments is greater in the northern part of the beach. A number of coastal engineering structures have blocked natural sediment supplies. The beach suffers from sediment deficit now and has lost about 400 m3 of sand annually from the dry beach between 1997 and 2005.

  15. Sediment environmental capacity of 137Cs in Daya Bay

    ZHANG Junli; CHEN Jiajun; XU Jialin; LI Yuanxin; HUANG Naiming


    Sediment environmental capacity of pollutants is very important for marine environmental management.Based on the methodology of a study on water,soil environmental capacity,and mass conservation theory in a system,the concept and model on sediment environmental capacity for 137Cs in Daya Bay were developed.The static capacity for 137Cs in the upper sediment near the shore at a shallow area was calculated,and the annual dynamic capacity and total dynamic capacity were also calculated through determination of the typical biomass in the sediment.The results showed that the estimated environmental capacity for 137Cs in sediments was approximately equal to the current input of 137Cs into the sediments.Controlling the input of 137Cs in the sediments within the environmental capacity guarantees the sustainability of the current situation of the Daya Bay ecosystem and avoidance of a significant degradation of the system.

  16. Paleomagnetic research on Black Sea Quaternary sediments

    Kalcheva, V.; Nozharov, P.; Kovacheva, M.; Shopov, V.


    The paper reports the first paleomagnetic study of a Black Sea Quaternary sediment core made by a Bulgarian research group. The experimental results show an important difference in magnetic behaviour between the samples from the Holocene part and those from the Pleistocene part of the core. Suggestions are made for the character of the remanent magnetization and the main carriers of it. The presence of greigite (Fe 3S 4) and pyrite (FeS 2) is discussed. A rough correlation is established between the variation of inclination for the Holocene part of the sediment and for the Bulgarian archeomagnetic curve. On the basis of the comparison of inclination data obtained from the Pleistocene part of the core and previously studied Black Sea core (related to the absolute time scale), it is suggested that the lower boundary of the Pleistocene part is ˜ 16000 years old (BP).

  17. Longshore sediment transport at Golden Sands (Bulgaria

    Hristo Nikolov


    Full Text Available The paper presents the results of studies on the qualitative and quantitative features of the littoral drift at Golden Sands (Bulgaria, carried out jointly by Polish and Bulgarian researchers. The mathematical modelling of physical coastal processes took wave transformation (wave diffraction and refraction; the effects of shoaling and wave breaking and longshore sediment transport into account. The computations were carried out for the mean statistical annual wave climate, determined on the basis of IO BAS wave data, simulated using the WAM method from long-term Black Sea wind data. The results of sediment transport computations clearly show that its direction off the Golden Sands shore is from north to south.

  18. Sediment Analysis Using a Structured Programming Approach

    Daniela Arias-Madrid


    Full Text Available This paper presents an algorithm designed for the analysis of a sedimentary sample of unconsolidated material and seeks to identify very quickly the main features that occur in a sediment and thus classify them fast and efficiently. For this purpose, it requires that the weight of each particle size to be entered in the program and using the method of Moments, which is based on four equations representing the mean, standard deviation, skewness and kurtosis, is found the attributes of the sample in few seconds. With the program these calculations are performed in an effective and more accurately way, obtaining also the explanations of the results of the features such as grain size, sorting, symmetry and origin, which helps to improve the study of sediments and in general the study of sedimentary rocks.

  19. Sedimentation process and design of settling systems

    De, Alak


    This book is designed to serve as a comprehensive source of information of sedimentation processes and design of settling systems, especially as applied to design of such systems in civil and environmental engineering. The book begins with an introduction to sedimentation as a whole and goes on to cover the development and details of various settling theories. The book traces the chronological developments of the comprehensive knowledge of settling studies and design of settling systems from 1889.A new concept of 'Velocity Profile Theorem', tool for settling problem analysis, has been employed to the analysis of the phenomenon of short circuiting. Complete theory of tube settling has been developed and its application to the computation of residual solids from the assorted solids through the same has been demonstrated. Experimental verification of the tube settling theory has also been presented. Field-oriented compatible design and operation methodology of settling system has been developed from the detailed...

  20. Authigenic Uranium in Eastern Equatorial Pacific Sediments

    Marcantonio, F.; Lyle, M. W.; Loveley, M. R.; Ibrahim, R.


    Authigenic U concentrations have been used as an indicator of redox state in marine sediments. Soluble U(VI) in porewaters is reduced to insoluble U(IV) under suboxic conditions setting up a diffusion gradient through which U in bottom waters is supplied to reducing sediments. Researchers have used sedimentary redox enrichment of U as a tool to identify past redox changes, which may be caused by changes in organic carbon rain rates and/or bottom water oxygen levels. Differentiating between these two explanations is important, as the former is tied to the use of authigenic U as a paleoproductivity proxy. We examined sediments from 4 sediment cores retrieved from two different localities in the Panama Basin in the eastern equatorial Pacific. Two cores were retrieved from the northern Panama basin at the Cocos Ridge, (4JC at 5° 44.7'N 85° 45.5' W, 1730 m depth; 8JC at 6° 14.0'N 86° 2.6' W, 1993 m depth), and two were retrieved from the south at the Carnegie Ridge, (11JC at 0° 41.6'S 85° 20.0' W, 2452 m depth; 17JC at 0° 10.8'S 85° 52.0' W, 2846 m depth). Using 230Th systematics and seismic profiling at each of the sites, we've identified significant sediment winnowing (4JC and 11JC) and focusing (8JC and 17JC). At all sites, we believe that changes in age-model-derived sand (i.e., >63µm) mass accumulation rates (MAR) best represent changes in rain rates. Glacial rain rates are higher than those in the Holocene by a factor of 2-3 at both sites. Peak Mn levels (>1%), the brown-to-green color transition (which likely represents the oxic/post-oxic boundary), and peak U concentrations all appear in the same order with increasing depth down core. At the Carnegie sites, where MARs are greater than those at the Cocos sites, increases in authigenic U (up to 4 ppm) occur during the mid- to late Holocene at depths of 10-15 cm. At the Cocos sites, increases in authigenic U (up to 12 ppm) occur lower in the sediment column (25-30 cm) during the late glacial. The decrease

  1. 100 Area Columbia River sediment sampling

    Weiss, S.G. [Westinghouse Hanford Co., Richland, WA (United States)


    Forty-four sediment samples were collected from 28 locations in the Hanford Reach of the Columbia River to assess the presence of metals and man-made radionuclides in the near shore and shoreline settings of the Hanford Site. Three locations were sampled upriver of the Hanford Site plutonium production reactors. Twenty-two locations were sampled near the reactors. Three locations were sampled downstream of the reactors near the Hanford Townsite. Sediment was collected from depths of 0 to 6 in. and between 12 to 24 in. below the surface. Samples containing concentrations of metals exceeding the 95 % upper threshold limit values (DOE-RL 1993b) are considered contaminated. Contamination by arsenic, chromium, copper, lead, and zinc was found. Man-made radionuclides occur in all samples except four collected opposite the Hanford Townsite. Man-made radionuclide concentrations were generally less than 1 pCi/g.

  2. Hydrodynamic dispersion broadening of a sedimentation front

    Martin, J.; Rakotomalala, N.; Salin, D.


    Hydrodynamic dispersion is responsible for the spreading of the sedimentation front even in a noncolloidal monodisperse suspension. Measurements of the broadening of the top front observed during sedimentation have been used in determining the hydrodynamic dispersion coefficient. Hindered settling has an opposed effect and leads to the self-sharpening of the front. Both effects have to be taken into account simultaneously. This Letter provides a simple, but complete determination of the space and time concentration profile and shows that the final front should consist of a steady-shape profile propagating at constant velocity. With such a solution, the data of Davis et al. [AIChE J. 34, 123 (1988); J. Fluid Mech. 196, 107 (1988)] give hydrodynamic dispersion coefficient five times larger than their former analysis, in agreement with Lee et al. [Phys. Fluids A 4, 2601 (1992)].

  3. Overflow Concentration and Sedimentation in Hoppers

    Hjelmager Jensen, Jacob; Saremi, Sina


    at the inflow. The hopper constitutes a complex system despite its geometrical regularity; the complexities are largely from the settling processes in concentrated polydisperse mixtures. These settling processes can, however, be captured by employing available settling formulas applicable for multifractional...... stages can be captured using a sediment budget approach, i.e., by using continuity equations for water and sediment phases. In this study, the compositional transformation and the bed height inside the hopper are obtained by solving these equations, considering monodisperse, bidisperse, and polydisperse...... mixtures, the former analytically. Although assumptions tied to the mathematical model are fulfilled best for hoppers rigged with a multiple-inflow system, the model accurately predicts measured concentrations in the final stage of overflow for single-inflow systems. The model can be used...

  4. Nitric oxide turnover in permeable river sediment

    Schreiber, Frank; Stief, Peter; Kuypers, Marcel M M;


    We measured nitric oxide (NO) microprofiles in relation to oxygen (O2) and all major dissolved N-species (ammonium, nitrate, nitrite, and nitrous oxide [N2O]) in a permeable, freshwater sediment (River Weser, Germany). NO reaches peak concentrations of 0.13 μmol L-1 in the oxic zone and is consumed...... in the oxic-anoxic transition zone. Apparently, NO is produced by ammonia oxidizers under oxic conditions and consumed by denitrification under microoxic conditions. Experimental percolation of sediment cores with aerated surface water resulted in an initial rate of NO production that was 12 times higher than...... the net NO production rate in steady state. This initial NO production rate is in the same range as the net ammonia oxidation rate, indicating that NO is transiently the main product of ammonia oxidizers. Stable isotope labeling experiments with the 15N-labeled chemical NO donor S...

  5. Dissolved and particulate carbohydrates in contrasting marine sediments

    Burdige, D. J.; Skoog, A.; Gardner, K.


    Dissolved and particulate carbohydrates were examined in contrasting Chesapeake Bay (estuarine) and mid-Atlantic shelf/slope break (continental margin) sediments. Particulate carbohydrates (PCHOs) represented ˜5-9% of the total sediment particulate organic carbon (POC), and PCHO remineralization appeared to be a similar fraction of total sediment carbon oxidation (or C ox). When these results are compared with results from other coastal sediments and a pelagic turbidite, PCHO remineralization (as a percentage of C ox) did not vary by more than a factor of ˜2-3 over a 3-4 order of magnitude range in C ox values. The causes of this are not well understood, but may be related to specific effects associated with the remineralization of highly altered organic matter mixtures under aerobic conditions. Dissolved carbohydrates (DCHOs) in these sediment pore waters ranged from ˜30 to 400 μM, increased with depth in a manner similar to total DOC, and represented ˜10 to 55% of pore water DOC. In Chesapeake Bay sediments this percentage decreased with sediment depth, while in these continental margin sediments it was constant (upper 30 cm). Of the DCHOs in these pore waters ˜30 to 50% could be identified as individual aldoses (monomeric neutral sugars), and total aldose yields (individual aldoses as a percentage of total DOC) were higher in these continental margin sediment pore waters (>9%) than they were in the estuarine sediment pore waters (<5%). A comparison of DCHO and PCHO concentrations in these sediments indicates that their concentrations are uncoupled, and that pore water DCHO concentrations are primarily controlled by sediment remineralization processes. Pore water DCHOs appeared to be preferentially found in the high molecular weight (HMW) DOC pool, and likely occur as some of the initial HMW intermediates produced and consumed during sediment POC remineralization. These results also support past suggestions about the differing controls on carbon


    Jens R.VALEUR; Steen LOMHOLT; Christian KNUDSEN


    A fixed link (tunnel and bridge,in total 16 km) was constructed between Sweden and Denmark during 1995-2000.As part of the work,approximately 16 million tonnes of seabed materials (limestone and clay till) were dredged,and about 0.6 million tonnes of these were spilled in the water.Modelling of the spreading and sedimentation of the spilled sediments took place as part of the environmental monitoring of the construction activities.In order to verify the results of the numerical modelling of sediment spreading and sedimentation,a new method with the purpose of distinguishing between the spilled sediments and the naturally occurring sediments was developed.Because the spilled sediments tend to accumulate at the seabed in areas with natural sediments of the same size,it is difficult to separate these based purely on the physical properties.The new method is based on the geo-chemical differences between the natural sediment in the area and the spill.The basic properties used are the higher content of calcium carbonate material in the spill as compared to the natural sediments and the higher Ca/Sr ratio in the spill compared to shell fragments dominating the natural calcium carbonate deposition in the area.The reason for these differences is that carbonate derived from recent shell debris can be discriminated from Danien limestone,which is the material in which the majority of the dredging took place,on the basis of the Ca/Sr ratio being 488 in Danien Limestone and 237 in shell debris.The geochemical recognition of the origin of the sediments proved useful in separating the spilled from the naturally occurring sediments.Without this separation,validation of the modelling of accumulation of spilled sediments would not have been possible.The method has general validity and can be used in many situations where the origin ora given sediment is sought.

  7. Concentrations of DDTs and dieldrin in Long Island Sound sediment.

    Yang, Lijia; Li, Xiqing; Zhang, Pengfei; Melcer, Michael E; Wu, Youxian; Jans, Urs


    The concentrations of three frequently detected organochlorine pesticides (OCPs) and one degradation product, p,p'-DDT, p,p'-DDD, dieldrin, and p,p'-DDE were determined in recently collected (2005-2006) and archived (1986-1989) surficial sediments and sediment cores from Long Island Sound (LIS). The concentration of dieldrin ranged from 0.05 to 5.27 ng g(-1) dry weight in the surficial sediments, and from 0.05 to 11.7 ng g(-1) dry weight in the sediment cores. Total DDXs (the sum of p,p'-DDE, p,p'-DDD and p,p'-DDT) concentrations ranged from 1.31 to 33.2 ng g(-1) in surficial sediments and 1.11 to 66.4 ng g(-1) in sediment cores. The results indicate that the three OCPs and DDE were still widely present in LIS surficial sediments two decades after the use of these pesticides in the United States was banned. In addition, the surficial concentrations did not decrease significantly when compared to the concentrations in archived samples collected two decades ago. Sediments in the western part of LIS were more contaminated (with concentrations in some western sites being still above probable effect levels) than those in the eastern part, probably as a result of the net westward sediment transport in LIS. The three OCPs and DDE were detected at all depths (down to ~50 cm) in the sediment cores, and concentration profiles indicated a depositional sedimentary environment with significant sediment mixing. Such mixing may redistribute OCPs deposited earlier (deeper in sediment bed) to the sediment surface and lead to enhanced persistence of OCP concentrations in surficial sediments. This journal is © The Royal Society of Chemistry 2012

  8. Contaminated Sediments at Navy Facilities: Cleanup Alternatives


    lack of experience and case studies and due to insufficient regulatory guidance. Report Documentation Page Report Date 01DEC2002 Report Type N...In some situations, the best solution is to allow natural burial and chemical weathering to permanently reduce risk. In other cases , sediments can...destruction) • Phytoremediation (destruction/separation) Beneficial Use • Manufactured soil/fill (separation) • Cement (destruction

  9. Integrated Model for the Acoustics of Sediments


    ocean sediments. HFEVA is based on the model found in the APL-UW handbook number 9407 [12]. Progress was achieved through the representation of the frame...This is the "swiss cheese " approximation, in which the frame bulk and shear moduli are essentially that of the solid material but diluted by the pores...High-Frequency Ocean Environmental Acoustic Models Handbook ," Applied Physics Laboratory, University of Washington, U.S. APL-UW 9407, (1994). 13. N. P

  10. Thermal conductivity of hydrate-bearing sediments

    Cortes, Douglas D.; Martin, Ana I.; Yun, Tae Sup; Francisca, Franco M.; Santamarina, J. Carlos; Ruppel, Carolyn


    A thorough understanding of the thermal conductivity of hydrate-bearing sediments is necessary for evaluating phase transformation processes that would accompany energy production from gas hydrate deposits and for estimating regional heat flow based on the observed depth to the base of the gas hydrate stability zone. The coexistence of multiple phases (gas hydrate, liquid and gas pore fill, and solid sediment grains) and their complex spatial arrangement hinder the a priori prediction of the thermal conductivity of hydrate-bearing sediments. Previous studies have been unable to capture the full parameter space covered by variations in grain size, specific surface, degree of saturation, nature of pore filling material, and effective stress for hydrate-bearing samples. Here we report on systematic measurements of the thermal conductivity of air dry, water- and tetrohydrofuran (THF)-saturated, and THF hydrate-saturated sand and clay samples at vertical effective stress of 0.05 to 1 MPa (corresponding to depths as great as 100 m below seafloor). Results reveal that the bulk thermal conductivity of the samples in every case reflects a complex interplay among particle size, effective stress, porosity, and fluid-versus-hydrate filled pore spaces. The thermal conductivity of THF hydrate-bearing soils increases upon hydrate formation although the thermal conductivities of THF solution and THF hydrate are almost the same. Several mechanisms can contribute to this effect including cryogenic suction during hydrate crystal growth and the ensuing porosity reduction in the surrounding sediment, increased mean effective stress due to hydrate formation under zero lateral strain conditions, and decreased interface thermal impedance as grain-liquid interfaces are transformed into grain-hydrate interfaces.

  11. Biological Assessment of Upper Mississippi River Sediments.


    clams Amblema plicata as solid phase test species; EL personnel added the amphipod Hyallela azteca .) It was agreed that water fleas Daphnia sp. would be...survival of freshwater amphipods H. azteca in all four of the UMR sediments was determined. Test containers were crystallizing dishes placed in a water...vidual H. azteca were placed in each test container and survival was determined after 10 days exposure. 14. Two acute toxicity experiments with water

  12. Evaluating Sediment Mobility for Siting Nearshore Berms


    Berms by Brian C. McFall, S. Jarrell Smith, Cheryl E. Pollock, James Rosati III, and Katherine E. Brutsché PURPOSE: This Coastal and Hydraulics... studies to compare multiple placement sites. Presently, a Matlab script is available to perform the calculations using both methods. Future development...estimate the potential volume of sediment that a placement operation might yield to beneficially nourish a wetland or nearshore region, thereby allowing

  13. Sediment Interfaces: Ecotones on a Microbial Scale

    Borchers, M. R.; Colwell, F. S.; D'Angelo, G.; Thurber, A. R.; Graw, M. F.


    Ecotones - transitions between different biomes - often support greater faunal diversity than the adjacent ecological systems. For subseafloor microorganisms, defined geological and chemical gradients have been shown to affect population sizes and community structure, but the role that sediment interfaces play is still unclear. Here, we test the hypothesis that zones of transition between two distinct sediment types increase microbial diversity and change community composition. Concurrently, we explore those factors that drive deep-subsurface microbial community structure (e.g., depth, interstitial water chemistry, methane concentrations, clay content). Samples from IODP Expedition 349 - South China Sea Tectonics - had interfaces of either ash/clay or turbidite/clay boundaries sampled , DNA extracted, and the 16S rRNA gene analyzed on an Illumina MiSeq platform. Initial analyses reveal that microbial communities in sediment samples are distinct from communities in drilling fluid, indicating that contamination is unlikely. In four of the eight complete interfaces currently analyzed we found an increase in diversity (based on the chao1 index), in certain cases doubling the diversity of the adjacent rock types. The pattern was not uniform across all interfaces. While some posit that ecotones provide a mixing of the two adjacent communities, we were surprised to find an abundance (mean = 392 OTUs) of unique microbial taxa within the ecotone itself when compared to adjacent sediment (mean=282 unique OTUs). Thus while diversity was not uniformly increased in ecotones, the interface led to divergent microbial communities that were not simply mixtures of those adjacent. We will discuss the ability of abiotic factors in explaining the among ecotone variance that we observed. Our investigation helps to characterize the factors that drive microbial community structure of the subseafloor while highlighting the need to focus on habitat heterogeneity at a scale pertinent to

  14. Monitoring of suspended sediment in South Tyrol

    Nadalet, Rudi; Dinale, Roberto; Pernter, Martin; Maraldo, Luca; Peterlin, Dieter; Richter, Arnold; Comiti, Francesco


    In the context of the EU Water Framework Directive (WFD), which aims to achieve a good status of European water bodies, the Hydrographic Office of the Autonomous Province of Bolzano (Italy) extended in 2014 its institutional activities including the monitoring of suspended sediment in the river channel network. Currently, the only active monitoring station is on the Adige River at the gauging station of Ponte Adige near Bolzano (drainage area 2705 km2). The applied monitoring strategy and the data analysis concept are both based on the guidelines issued by the Austrian Federal Ministry of Agriculture, Forestry, Environment and Water Management (BMLFUW). The results indicates that the temporal variability strongly differs during the investigated period (2014-2015). In addition to the analysis of precipitation and water discharge, temperature and lightning activity were also included to better understand the sediment transport dynamics observed at the station. In summer 2015, the combination of constantly high daily temperature throughout the Adige basin (which drove intense glacier melting in the headwaters) with a high frequency of convective rainfall events (90% more than in 2014, obtained through lightning detection), led to an annual mass of transported suspended sediment of 260000 t. Interestingly, this value is similar to the one estimated for 2014 (300000 t), which was characterized by very different meteorological conditions (colder and wetter summer), but with the occurrence of an important flood in August, which transported half of the annual amount. Finally, we can conclude that the adopted monitoring strategy is applicable for institutional aims in terms of costs as well as in terms of time effort. During the next years, other stations for suspended sediment monitoring are planned to be installed in the Province to cover the most important river segments.

  15. Sediment-Tracing Technology: An Overview


    flattening of the profile of 210Pb activity versus depth in the surficial sediment layers, and degradation of the 137Cs peak (Appleby 2001). In the CRS model...parameters can be diagnostic of mineral type and origin; they are sensitive to chemical and thermal transformations and can reflect the ambient magnetic...feldspar, calcite , and water. When the magnetic field is removed, diamagnetism is lost. b. Paramagnetism: When a magnetic field is applied to a

  16. Incipient Motion of Sediment Under Currents

    DOU Guoren


    Summarized in the paper are the author′s studies on incipient motion of sediment in recent 40years. In addition to the forces of gravity, drag and lift, the cohesive force and the additional static pressure are important for fine particles. The relations between three stages of incipient motion are defined by use of instantaneous velocity. Formulas for initial velocity and critical shear stress are given and overall verified by the author′s and others′ experimental data

  17. Sediment Burial Intolerance of Marine Macroinvertebrates

    Hendrick, Vicki J.; Hutchison, Zoë L.; Last, Kim S.


    The marine environment contains suspended particulate matter which originates from natural and anthropogenic sources. Settlement of this material can leave benthic organisms susceptible to smothering, especially if burial is sudden i.e. following storms or activities such as dredging. Their survival will depend on their tolerance to, and their ability to escape from burial. Here we present data from a multi-factorial experiment measuring burial responses incorporating duration, sediment fract...

  18. Harmonize input selection for sediment transport prediction

    Afan, Haitham Abdulmohsin; Keshtegar, Behrooz; Mohtar, Wan Hanna Melini Wan; El-Shafie, Ahmed


    In this paper, three modeling approaches using a Neural Network (NN), Response Surface Method (RSM) and response surface method basis Global Harmony Search (GHS) are applied to predict the daily time series suspended sediment load. Generally, the input variables for forecasting the suspended sediment load are manually selected based on the maximum correlations of input variables in the modeling approaches based on NN and RSM. The RSM is improved to select the input variables by using the errors terms of training data based on the GHS, namely as response surface method and global harmony search (RSM-GHS) modeling method. The second-order polynomial function with cross terms is applied to calibrate the time series suspended sediment load with three, four and five input variables in the proposed RSM-GHS. The linear, square and cross corrections of twenty input variables of antecedent values of suspended sediment load and water discharge are investigated to achieve the best predictions of the RSM based on the GHS method. The performances of the NN, RSM and proposed RSM-GHS including both accuracy and simplicity are compared through several comparative predicted and error statistics. The results illustrated that the proposed RSM-GHS is as uncomplicated as the RSM but performed better, where fewer errors and better correlation was observed (R = 0.95, MAE = 18.09 (ton/day), RMSE = 25.16 (ton/day)) compared to the ANN (R = 0.91, MAE = 20.17 (ton/day), RMSE = 33.09 (ton/day)) and RSM (R = 0.91, MAE = 20.06 (ton/day), RMSE = 31.92 (ton/day)) for all types of input variables.

  19. The MSL-110 small sediment trap

    Lukashin, V. N.; Klyuvitkin, A. A.; Lisitzin, A. P.; Novigatsky, A. N.


    A simple construction of the MSL-110 sediment trap developed at the Laboratory of Physical-Geological Research of the Shirshov Institute of Oceanology, Russian Academy of Sciences, is presented. The trap is easily assembled from standard parts available at stores. The trap is easy to use, reliable, and inexpensive. It is applied for determination of sedimentary matter fluxes and their components in water columns of seas, lakes, and other water reservoirs.

  20. Volcanogenic sediments in the Indian Ocean

    Pattan, J.N.

    ….) and lithic fragments. The secondary component is diagenetic alteration of primary components then transferred to Fe-rich smectite, palagonite and zeolites. Volcanism in different tectonic settings contributes tephra to marine environments. In the Indian... Ocean volcanogenic components are derived from MOR volcanism, hot spot volcanism (ex: Reunion and Kerguelen hot spots) and subduction related volcanism in the Indonesian arc. During IIOE large number of sediment cores was retrieved in the Arabian...

  1. Thermal conductivity of hydrate-bearing sediments

    Cortes, D.D.; Martin, A.I.; Yun, T.S.; Francisca, F.M.; Santamarina, J.C.; Ruppel, C.


    A thorough understanding of the thermal conductivity of hydrate-bearing sediments is necessary for evaluating phase transformation processes that would accompany energy production from gas hydrate deposits and for estimating regional heat flow based on the observed depth to the base of the gas hydrate stability zone. The coexistence of multiple phases (gas hydrate, liquid and gas pore fill, and solid sediment grains) and their complex spatial arrangement hinder the a priori prediction of the thermal conductivity of hydrate-bearing sediments. Previous studies have been unable to capture the full parameter space covered by variations in grain size, specific surface, degree of saturation, nature of pore filling material, and effective stress for hydrate-bearing samples. Here we report on systematic measurements of the thermal conductivity of air dry, water- and tetrohydrofuran (THF)-saturated, and THF hydrate-saturated sand and clay samples at vertical effective stress of 0.05 to 1 MPa (corresponding to depths as great as 100 m below seafloor). Results reveal that the bulk thermal conductivity of the samples in every case reflects a complex interplay among particle size, effective stress, porosity, and fluid-versus-hydrate filled pore spaces. The thermal conductivity of THF hydrate-bearing soils increases upon hydrate formation although the thermal conductivities of THF solution and THF hydrate are almost the same. Several mechanisms can contribute to this effect including cryogenic suction during hydrate crystal growth and the ensuing porosity reduction in the surrounding sediment, increased mean effective stress due to hydrate formation under zero lateral strain conditions, and decreased interface thermal impedance as grain-liquid interfaces are transformed into grain-hydrate interfaces. Copyright 2009 by the American Geophysical Union.

  2. Aggregation, sedimentation, dissolution and bioavailability of ...

    To understand their fate and transport in estuarine systems, the aggregation, sedimentation, and dissolution of CdSe quantum dots (QDs) in seawater were investigated. Hydrodynamic size increased from 40 to 60 nm to >1 mm within 1 h in seawater, and the aggregates were highly polydispersed. Their sedimentation rates in seawater were measured to be 4–10 mm/day. Humic acid (HA), further increased their size and polydispersity, and slowed sedimentation. Light increased their dissolution and release of dissolved Cd. The ZnS shell also slowed release of Cd ions. With sufficient light, HA increased the dissolution of QDs, while with low light, HA alone did not change their dissolution. The benthic zone in estuarine systems is the most probable long-term destination of QDs due to aggregation and sedimentation. The bioavailability of was evaluated using the mysid Americamysis bahia. The 7-day LC50s of particulate and dissolved QDs were 290 and 23 μg (total Cd)/L, respectively. For mysids, the acute toxicity appears to be from Cd ions; however, research on the effects of QDs should be conducted with other organisms where QDs may be lodged in critical tissues such as gills or filtering apparatus and Cd ions may be released and delivered directly to those tissues. Because of their increasing use and value to society, cadmium-based quantum dots (QDs) will inevitably find their way into marine systems. In an effort to understand the fate and transport of CdSe QDs in estuar

  3. Acoustic measuring techniques for suspended sediment

    Gruber, P.; Felix, D.; Storti, G.; Lattuada, M.; Fleckenstein, P.; Deschwanden, F.


    Acoustic signals can be used in various ways for suspended sediment monitoring. One possibility which lends itself particularly well in the context of hydropower plants (HPPs), is to use installations for acoustic discharge measurement (ADM). Such installations already exist at waterways of many HPPs. Similar to certain turbidimeters, the attenuation of the forward scattered signal travelling through the water-sediment mixture is correlated with suspended sediment concentration (SSC). This correlation can be based on reference SSCs, e.g. from gravimetric analyses of bottle samples. Without the need of additional sensors and practically maintenance-free, this method is used successfully in the HPP Fieschertal to warn the HPP operator of high SSC to prevent excessive turbine abrasion. Acoustic methods and systems that allow for estimating both SSC and particle size distribution (PSD) are under development. The simultaneous determination of SSC and PSD is not possible using a single frequency. Therefore, multi-frequency approaches are investigated for generally scattered signals. When backscattered signals are used, a stronger frequency dependency can be exploited. However, the reliable simultaneous determination of particle size (and distribution) and concentration is still a major challenge due to a low signal-to-noise ratio and an ill- posed problem of estimating concentration and size from recorded signals. The optimal setup configuration (angles, frequencies) for such a system is not unique and further investigations are recommended.

  4. Historical Changes in Polychlorinated Biphenyls Contaminated Sediments

    Viet D. Dang


    Full Text Available Problem statement: PCBs contamination continues to pose a health risk to aquatic environments due to their recalcitrance and bioaccumulation. The Sangamo Weston/Twelvemile Creek/Lake Hartwell Superfund Site is an example of such a health risk as a result of PCBs discharged from a former capacitor manufacturing plant. We conducted a study in twelvemile creek (Clemson, SC, USA to examine the temporal trend of PCB contaminated sediments. Approach: Surface sediments were sampled at four sites in fall 2008 to compare with concentrations measured in past studies. Total PCBs and congener-specific analyses were performed on Gas Chromatography-Electron Capture Detector (GC-ECD. Results: Total PCB concentrations ranged from 0.026-0.18 ìg g-1, which were one order of magnitude lower than levels measured in 1987 (-1. Total PCBs in this study (based on more than 130 congeners were similar to those observed in 2003-2004 (based on only 20 congeners. PCB congener patterns indicated that PCBs near the source were dominated by lower chlorinated congeners while heavy congeners were persistent further downstream. Conclusion: Physical and biochemical processes such as natural attenuation, mixing/dispersion and PCBs degradation are contributing to the decreasing concentrations after the discharge was eliminated in 1975. The congener pattern shift is likely attributed to a loss via volatilization and export of contaminated sediment from the stream. Burial could be a potential means to prevent resuspension into the water column.

  5. Acoustic estimation of suspended sediment concentration

    朱维庆; 朱敏; 周忠来; 潘锋; 霍其增; 张向军


    In this paper, the acoustic estimation of suspended sediment concentration is discussed and two estimation methods of suspended sediment concentration are presented. The first method is curve fitting method, in which, according to the acoustic backscattering theory we assume that the fit-ting factor K1 (r) between the concentration M(r) obtained by acoustic observation and the concentra-tion M0(r) obtained by sampling water is a high order power function of distance r. Using least-square algorithm, we can determine the coefficients of the high order power function by minimizing the differ-ence between M(r) and M0(r) in the whole water profile. To the absorption coefficient of sound due to the suspension in water we do not give constraint in the first method. The second method is recur-sive fitting method, in which we take M0(r) as the conditions of initialization and decision and give ra-tional constraints to some parameters. The recursive process is stable. We analyzed the two methods with a lot of experimental data. The analytical results show that the estimate error of the first method is less than that of the second method and the latter can not only estimate the concentration of suspended sediment but also give the absorption coefficient of sound. Good results have been obtained with the two methods.

  6. Phytoplankton and sediments in Gulf of Mexico


    Affected both by terrestrial factors like agriculture, deforestation, and erosion, and by marine factors like salinity levels, ocean temperature and water pollution, coastal environments are the dynamic interface between land and sea. In this MODIS image from January 15, 2002, the Gulf of Mexico is awash in a mixture of phytoplankton and sediment. Tan-colored sediment is flowing out into the Gulf from the Mississippi River, whose floodplain cuts a pale, wide swath to the right of center in the image, and also from numerous smaller rivers along the Louisiana coast (center). Mixing with the sediment are the multi-colored blue and green swirls that reveal the presence of large populations of marine plants called phytoplankton. Phytoplankton populations bloom and then fade, and these cycles affect fish and mammals-including humans-higher up the food chain. Certain phytoplankton are toxic to both fish and humans, and coastal health departments must monitor ecosystems carefully, often restricting fishing or harvesting of shellfish until the blooms have subsided.

  7. Discrete element modeling of subglacial sediment deformation

    Damsgaard, Anders; Egholm, David L.; Piotrowski, Jan A.; Tulaczyk, Slawek; Larsen, Nicolaj K.; Tylmann, Karol


    The Discrete Element Method (DEM) is used in this study to explore the highly nonlinear dynamics of a granular bed when exposed to stress conditions comparable to those at the bed of warm-based glaciers. Complementary to analog experiments, the numerical approach allows a detailed analysis of the material dynamics and the shear zone development during progressive shear strain. The geometry of the heterogeneous stress network is visible in the form of force-carrying grain bridges and adjacent, volumetrically dominant, inactive zones. We demonstrate how the shear zone thickness and dilation depend on the level of normal (overburden) stress, and we show how high normal stress can mobilize material to great depths. The particle rotational axes tend to align with progressive shear strain, with rotations both along and reverse to the shear direction. The results from successive laboratory ring-shear experiments on simple granular materials are compared to results from similar numerical experiments. The simulated DEM material and all tested laboratory materials deform by an elastoplastic rheology under the applied effective normal stress. These results demonstrate that the DEM is a viable alternative to continuum models for small-scale analysis of sediment deformation. It can be used to simulate the macromechanical behavior of simple granular sediments, and it provides an opportunity to study how microstructures in subglacial sediments are formed during progressive shear strain.

  8. Riverside morphological response to pulsed sediment diversions

    Meselhe, Ehab A.; Sadid, Kazi M.; Allison, Mead A.


    Sediment diversions deliver sediment and fresh water from rivers to surrounding wetland areas as a strategy to build and sustain coastal wetland areas. Numerical modeling of the lower Mississippi River, USA, coupled with detailed field observations are used to provide quantitative information about the morphodynamic behavior of river channels in response to diverting large quantities of water and sediment. This study suggests that reduction in river stream power caused by the extraction of significant amounts of water discharge results in river channel aggradation in the vicinity and downstream of diversions. The aggradation quantities depend on the diversion sand capture efficiency and the diverted water discharge relative to the main river discharge. Additional factors observed to influence the sand capture efficiency include the invert elevation of the diversion intake, placement of the diversion intake on top of a lateral or point bars, and the local degree of the river channel curvature. Notably, the capture efficiency of fine material (silt and clay), to a large degree, is not site specific and is rather influenced by the timing of the diversion structure operations relative to the incoming fine-material hydrograph.

  9. Equilibrium bed—concentration of nonuniform sediment

    孙志林; 孙志锋; DONAHUEJohn


    Knowledge of the equilibrium bed-concentration is vital to mathematical modeling of the river-bed deformation associated with suspended load but previous investigations only daelt with the reference concentra-tion of uniform sediment because of difficulties in observation of the bed-concentration.This work is a first at-tempe to develop a theoretical formula for the equilibrium bed-concentration of any fraction of nonumiform sedi-ment defined at the bed-surface.The formula is based on a stochastic-mechanistic model for the exchange of nonumiform sediment near the bed,and described as a function of incipient motion probability,non-ceasing probability,pick-up probability,and the ratio of the average single-step continuous motion time to static time.Comparison of bed-concentration calculated from the proposed formula with the measured data showed satisfac-tory agreement,indicating the present formula can be used for solving the differential equation governing the notion of suspended load.

  10. Phytoplankton and sediments in Gulf of Mexico


    Affected both by terrestrial factors like agriculture, deforestation, and erosion, and by marine factors like salinity levels, ocean temperature and water pollution, coastal environments are the dynamic interface between land and sea. In this MODIS image from January 15, 2002, the Gulf of Mexico is awash in a mixture of phytoplankton and sediment. Tan-colored sediment is flowing out into the Gulf from the Mississippi River, whose floodplain cuts a pale, wide swath to the right of center in the image, and also from numerous smaller rivers along the Louisiana coast (center). Mixing with the sediment are the multi-colored blue and green swirls that reveal the presence of large populations of marine plants called phytoplankton. Phytoplankton populations bloom and then fade, and these cycles affect fish and mammals-including humans-higher up the food chain. Certain phytoplankton are toxic to both fish and humans, and coastal health departments must monitor ecosystems carefully, often restricting fishing or harvesting of shellfish until the blooms have subsided.

  11. Application of Sediment Trend Analysis in the Examination of Sediment Transport Dynamics of Missisquoi Bay

    Kraft, M. P.; Manley, P.; Singer, J.; Manley, T.; McLaren, P.


    Missisquoi Bay is located between Vermont and Quebec in the northeast sector of the Restricted Arm of Lake Champlain. The average depth of the Bay is slightly less than 3 meters with a surface area covering 77.5 km2. The Bay receives water from eastern and western catchment basins, most notably via the Missisquoi, Rock, and Pike Rivers. Circulation within Missisquoi Bay has been altered by the construction of railroad causeways in the late 19th century and highway construction in the early 20th century. Over the past several decades there have also been changes in land-use practices, including the intensification of agriculture, increased animal husbandry, and urbanization. As a consequence of construction and changing land use, loadings of nitrogen and phosphorus to the Bay have increased seasonal oxygen depletion causing eutrophication. Since monitoring began in 1992, Missisquoi Bay has displayed the highest mean total phosphorus concentrations and chlorophyll a concentrations in Lake Champlain. Various efforts have taken place to reduce nutrient loading to Missisquoi Bay, but persistent release of phosphorus from bottom sediments will continue to delay for decades the recovery from nutrient diversion. To better understand the causes and timing of eutrophication in Missisquoi Bay, one component of a 5-year integrated VT EPSCoR - RACC program included an examination of N and P loadings and their distribution throughout the Bay. Internal circulation patterns are also being studied. To determine the pattern of net sediment transport and determine sediment behavior (erosion and accretion), a Sediment Trend Analysis (STA) was performed using 369 grab samples collected in the Bay. Grain size distributions for the surface sediment samples were determined using a Malvern Mastersizer 2000 particle size analyzer. Sediment maps showing the proportion of gravel, sand, and mud show that near major river distributaries sand-sized sediment was dominant with muds becoming more

  12. Sediment cascade modelling for stochastic torrential sediment transfers forecasting in a changing alpine climate

    Rudaz, Benjamin; Bardou, Eric; Jaboyedoff, Michel


    Alpine ephemeral streams act as links between high altitude erosional processes, slope movements and valley-floor fluvial systems or fan storage. Anticipating future mass wasting from these systems is crucial for hazard mitigation measures. Torrential activity is highly stochastic, with punctual transfers separating long periods of calm, during which the system evolves internally and recharges. Changes can originate from diffuse (rock faces, sheet erosion of bared moraines), concentrated external sources (rock glacier front, slope instabilities) or internal transfers (bed incision or aggradation). The proposed sediment cascade model takes into account those different processes and calculates sediment transfer from the slope to the channel reaches, and then propagates sediments downstream. The two controlling parameters are precipitation series (generated from existing rain gauge data using Gumbel and Extreme Probability Distribution functions) and temperature (generated from local meteorological stations data and IPCC scenarios). Snow accumulation and melting, and thus runoff can then be determined for each subsystem, to account for different altitudes and expositions. External stocks and sediment sources have each a specific response to temperature and precipitation. For instance, production from rock faces is dependent on frost-thaw cycles, in addition to precipitations. On the other hand, landslide velocity, and thus sediment production is linked to precipitations over longer periods of time. Finally, rock glaciers react to long-term temperature trends, but are also prone to sudden release of material during extreme rain events. All those modules feed the main sediment cascade model, constructed around homogeneous torrent reaches, to and from which sediments are transported by debris flows and bedload transport events. These events are determined using a runoff/erosion curve, with a threshold determining the occurrence of debris flows in the system. If a debris



    The relation between runoff volume and sediment yield for individual events in a given watershed receives little attention compared to the relation between water discharge and sediment yield, though it may underlie the event-based sediment-yield model for large-size watershed. The data observed at 12 experimental subwatersheds in the Dalihe river watershed in hilly areas of Loess Plateau, North China,was selected to develop and validate the relation. The peak flow is often considered as an important factor affecting event sediment yield. However, in the study areas, sediment concentration remains relatively constant when water discharge exceeds a certain critical value, implying that the heavier flow is not accompanied with the higher sediment transport capacity. Hence, only the runoff volume factor was considered in the sediment-yield model. As both the total sediment and runoff discharge were largely produced during the heavy-discharge stage, and the sediment concentration was negligibly variable during this stage, a proportional function can be used to model the relation between event runoff volume and sediment yield for a given subwatershed. The applicability of this model at larger spatial scales was also discussed, and it was found that for the Yaoxinzhuang station at the Puhe River basin, which controls a drainage area of 2264km2, a directly proportional relation between event runoff volume and sediment yield may also exist.

  14. Storm Event Suspended Sediment-Discharge Hysteresis and Controls in Agricultural Watersheds: Implications for Watershed Scale Sediment Management.

    Sherriff, Sophie C; Rowan, John S; Fenton, Owen; Jordan, Philip; Melland, Alice R; Mellander, Per-Erik; hUallacháin, Daire Ó


    Within agricultural watersheds suspended sediment-discharge hysteresis during storm events is commonly used to indicate dominant sediment sources and pathways. However, availability of high-resolution data, qualitative metrics, longevity of records, and simultaneous multiwatershed analyses has limited the efficacy of hysteresis as a sediment management tool. This two year study utilizes a quantitative hysteresis index from high-resolution suspended sediment and discharge data to assess fluctuations in sediment source location, delivery mechanisms and export efficiency in three intensively farmed watersheds during events over time. Flow-weighted event sediment export was further considered using multivariate techniques to delineate rainfall, stream hydrology, and antecedent moisture controls on sediment origins. Watersheds with low permeability (moderately- or poorly drained soils) with good surface hydrological connectivity, therefore, had contrasting hysteresis due to source location (hillslope versus channel bank). The well-drained watershed with reduced connectivity exported less sediment but, when watershed connectivity was established, the largest event sediment load of all watersheds occurred. Event sediment export was elevated in arable watersheds when low groundcover was coupled with high connectivity, whereas in the grassland watershed, export was attributed to wetter weather only. Hysteresis analysis successfully indicated contrasting seasonality, connectivity and source availability and is a useful tool to identify watershed specific sediment management practices.

  15. Sedimentation from suspension and sediment accumulation rate in the River Vistula prodelta, Gulf of Gdańsk (Baltic Sea

    Mateusz Damrat


    Full Text Available The River Vistula is one of the largest suppliers of fresh water and terrigenous matter to the Baltic Sea. The impact of this river on the Baltic coastal system and the fate of the sediment delivered to the Gulf of Gdańsk are not well understood. Spatial transport patterns, as well as the settling, deposition and accumulation of the sediments were studied at the Vistula prodelta in different seasons from January 2012 to January 2013. The concentration of suspended matter in the water column was measured with optical methods, the sedimentation rate was determined with sediment traps, and the sediment accumulation rate was estimated using 210Pb dating. Our data shows that the annual supply of sediment to the sediment-water interface exceeds the annual rate of sediment accumulation in the outer Vistula prodelta by a factor of three. Sediment trapping during rough weather showed that significant sediment redeposition was taking place, even at depths of 55 m. The dynamic sedimentary processes occurring in the Vistula prodelta mean that that more than two-thirds of the sediment mass can be remobilized and then redeposited in deeper parts of the Gdańsk Basin.

  16. Sediment studies at Bikini Atoll part 1. distribution of fine and coarse components in surface sediments

    Noshkin, V. E.; Eagle, R.J.; Robison, W.L.


    In 1979, 21 years after the moratorium on nuclear testing in the Marshall Islands, surface sediment samples (to depths of 2 and 4 cm) were collected from 87 locations over the floor of Bikini lagoon. The main purpose for the collections was to map the distribution of long- lived man-made radionuclides associated with the bottom material. In addition the samples were processed to estimate the fraction of fine and coarse components to show what modifications occurred since the sediment composition was first described in samples collected before testing in 1946. In this report a comparison is made of the amount and distribution of fine material associated with the lagoon surface sediment before and after the testing of nuclear devices. Nuclear testing produced more finely divided material in-the surface sediment layer over large areas of the lagoon and especially in regions of the lagoon and reef adjacent to test sites. Five cratering events at Bikini Atoll generated sufficient material to account for the inventory of new fine material found over the bottom surface of the lagoon. Although the fraction of fine material in the bottom sediments was altered by the nuclear events, the combined processes of formation, transport and deposition were not sufficiently dynamic to alter the geographical features of the major sedimentary components over most of the lagoon floor.

  17. Sediment Surface Areas, Organic Content, and Metal Fractionation of Point Mugu Sediments

    Becerra, C. A.; Wong, N.; Khachikian, C. S.


    Point Mugu contains one of the largest coastal wetlands ecosystems in California, which includes a Naval Air station, several sewage oxidation ponds and a partly dredged lagoon. Remediation efforts include investigating the feasibility of using the present sewage pond sludge to restore a dredged area in the lagoon. A problem with this approach is the potential release and subsequent environmental impact of the toxic substances from the sludge. Contaminants may become unavailable once sorbed onto particles. In general, this process is a direct function of surface area and organic carbon sorbed onto the sediment. The goal of the current investigation is to provide insight into the biological availability of a suite of metal contaminants in Pt. Mugu marsh sediments by studying changes in the physical and chemical properties of the sediments at horizontal and vertical spatial scales. The surface area and organic carbon for eight cores were measured as well as the first three sequential extraction of a host of metals. We have found that a direct correlation exists between surface area and the organic content of sediments as a function of depth. Surface area and the amount of organic carbon decreases with depth, which could result in higher availability of metals with increasing depth into the sediments.

  18. Historical sediment record and distribution of polychlorinated biphenyls (PCBs) in sediments from tidal flats of Haizhou Bay, China.

    Zhang, Rui; Zhang, Fan; Zhang, Tiancheng; Yan, Hongqiang; Shao, Wei; Zhou, Li; Tong, Hebing


    The spatial and temporal variations and sources of polychlorinated biphenyls (PCBs) in sediment of tidal flat from Haizhou Bay, China were investigated. PCBs concentrations in surface sediments ranged from 1.33 to 6.27ngg(-1) dry weight. Low-chlorinated PCBs, dominated by the tri-PCB homologs, were identified as the prevalent contaminate of surface sediments. These results were in agreement with the fact that tri-PCB homologs are the dominant contaminants in China. In surface sediment, the highest level appeared in the estuary, and it decreased with distance from the Linhong River estuary. PCBs concentrations started to rise from the mid-1950s, and reached a maximum in 2005. PCBs in sediment might originate from surface runoff and discharges of local source as well as slight atmospheric deposition, based on PCA. Additionally, the PCBs levels in the sediments were considered to rarely pose hazard to the aquatic and human health, based on Sediment Quality Guidelines (SQGs).

  19. Assessing the integrated sediment trapping role of man-made and natural sediment sinks, Minizr catchment, Ethiopia

    Mekonnen, Mulatie; Keesstra, Saskia; Stroosnijder, Leo; Baartman, Jantiene


    To enhance sedimentation within a catchment, man-made sediment trapping (ST) measures and natural sediment sinks are playing a vital role. To evaluate the ST role of such measures, this study was conducted at Minizr catchment, northwest Ethiopian highlands. Man-made soil and water conservation (SWC) structures constructed within the catchment and natural sediment sinks (floodplain and wetland) were digitized and quantified from Google earth imagery. Sediment pins, vertical cut measurements through the deposit (after the rainy season) and SWC structures dimension measurements (before and after the rainy seasons) were used to estimate the trapped sediment depth. Inflow and outflow suspended sediment measurements were done to calculate sediment trapping efficacies (STEs). On average, SWC structures trapped ~7922 t yr-1 (56 kg m-1 yr-1) and micro-trenches trapped ~13260 kg yr-1 (a micro-trench trapped 23 kg yr-1). A floodplain located near the centre of the catchment trapped ~ 9971 t yr-1 (59 kg m-2 yr-1) and a wetland located near the outlet of the catchment trapped ~ 8715 t yr-1 (36 kg m-2 yr-1). The STEs of the wetland and the floodplain were found to be 85 % and 77 %, respectively. Substantial difference was observed between the STE of grassed and un-grassed waterways, 75 % and 21 %, respectively. About ~40 % of the transported sediment was trapped by major sediment traps (both man-made and natural) and ~60 % is still leaving the catchment and entering into Koga reservoir. Although man-made structures and natural sediment sinks trapped large amount of sediment, the rate of sediment red-deposition is lower than the rate of sediment export at the outlet of the catchment, which is because of lack of an integrated ST approach.

  20. Tracking multiple sediment cascades at the river network scale identifies controls and emerging patterns of sediment connectivity

    Schmitt, Rafael J. P.; Bizzi, Simone; Castelletti, Andrea


    Sediment connectivity in fluvial networks results from the transfer of sediment between multiple sources and sinks. Connectivity scales differently between all sources and sinks as a function of distance, source grain size and sediment supply, network topology and topography, and hydrologic forcing. In this paper, we address the challenge of quantifying sediment connectivity and its controls at the network scale. We expand the concept of a single, catchment-scale sediment cascade toward representing sediment transport from each source as a suite of individual cascading processes. We implement this approach in the herein presented CAtchment Sediment Connectivity And DElivery (CASCADE) modeling framework. In CASCADE, each sediment cascade establishes connectivity between a specific source and its multiple sinks. From a source perspective, the fate of sediment is controlled by its detachment and downstream transport capacity, resulting in a specific trajectory of transfer and deposition. From a sink perspective, the assemblage of incoming cascades defines provenance, sorting, and magnitude of sediment deliveries. At the network scale, this information reveals emerging patterns of connectivity and the location of bottlenecks, where disconnectivity occurs. In this paper, we apply CASCADE to quantitatively analyze the sediment connectivity of a major river system in SE Asia. The approach provides a screening model that can support analyses of large, poorly monitored river systems. We test the sensitivity of CASCADE to various parameters and identify the distribution of energy between the multiple, simultaneously active sediment cascades as key control behind network sediment connectivity. To conclude, CASCADE enables a quantitative, spatially explicit analysis of network sediment connectivity with potential applications in both river science and management.

  1. N Isotopes in Nile Sediments (ethiopia, Sudan)

    Padoan, M.; Villa, I. M.; Garzanti, E.; Galbusera, M.; Quistini, S.; Peruta, L.; El Kammar, A.


    The Nile is the most important river of the Eastern Mediterranean. Its water and sediment fluxes have greatly influenced marine circulation throughout the Quaternary, and are widely considered as possible causes for stagnation and formation of sapropel (Krom et al., 1999a; 2002; Talbot et al., 2000; Freydier et al., 2001; Weldeab et al., 2002; Scrivner et al., 2004). Variations in annual flooding and baseflow of the river Nile, controlled by climate changes, had major impact on the rise and demise of Egyptian dynasties (Stanley et al., 2003). In order to better define sedimentary sources of the Nile system and to obtain more robust results, we have analyzed Nd isotopes in sediments of all its major Sudanese and Ethiopian tributaries (Atbara, Gash, Abay, Didesa, Dabus, White Nile, Bahr Ez Zeraf) in several replicate samples. Analyses were carried out on distinct mud and sand fractions (STANLEY, J.D., CLIFF, R.A., WOODWARD, J.C., 2002. Nile River sediment fluctuations over the past 7000 yr and their key role in sapropel development. Geol., 30, n. 1, 71-74. PADOAN M., GALBUSERA M., QUISTINI S., VILLA I.M., AND GARZANTI E., 2007 Isotopic tracers of Nile sediment sources. AGU Fall Meeting, San Francisco December 2007. PIK, R., DENIEL, C., COULON, C., YIRGU, G., MARTY, B., 1999, Isotopic and trace element signatures of Ethiopian flood basalts: Evidence for plume-lithosphere interactions. Geochim. Cosmochim. Acta, 63, 2263-2279. SCRIVNER, A., VANCE, D., ROHLING, E.J., 2004. New neodymium isotope data quantify Nile involvement in Mediterranean anoxic episodes. Geol., 32, n. 7, 565-568. STANLEY, J.D., KROM, M.D., CLIFF, R.A., WOODWARD, J.C., 2003. Short Contribution: Nile flow failure at the End of the Old Kingdom, Egypt: strontium isotopic and petrologic evidence. TALBOT, M.R., WILLIAMS, M.A.J., ADAMSON, D.A., 2000. Strontium isotope evidence for late Pleistocene reestablishment of an integrated Nile drainage network. Geol., 28, n. 4, 343-346. WELDEAB, S., EMEIS, K

  2. Gamma spectrometry for chronology of recent sediments

    Pittauerova, Daniela


    This thesis deals with several aspects of gamma spectrometric analysis of natural and artificial isotopes in sediments and their use as tracers for qualification and quantification of accumulation and mixing processes in different aquatic environments. Sediment cores from three distinct areas including terrigenous sediments deposited on the continental slope off NW Africa, deep sea sediments off Sumba Island and five stations from the Gulf of Eilat in the Red Sea area were measured and interpreted within this dissertation. The main concern in gamma spectrometry of voluminous environmental samples is a reliable efficiency calibration. This is specially relevant for the analysis of low energy gamma emitters (<100 keV). {sup 210}Pb, an important isotopic tracer to cover the period of the last century, is one of them. Within this work mathematical efficiency calibration was applied using a commercial software package. A series of validation tests was performed and evaluated for point and voluminous samples. When using {sup 210}Pb as a tracer it is necessary to determine its excess portion, which is not supported by ingrowth from the parent nuclide {sup 226}Ra. Its analysis is mostly performed via short lived daughter isotopes that follow after the intermediate gaseous member {sup 222}Rn. Preventing the escape of radon from the sample is a critical step before analysis due to a negative effect of supported {sup 210}Pb underestimation on the chronology, which was also documented in this thesis. Time series registering ingrowth of {sup 214}Pb and {sup 214}Bi towards radioactive equilibrium with {sup 226}Ra in different containers were evaluated for analyses of {sup 226}Ra. Direct analyses of {sup 226}Ra was compared to its detection via daughter products. A method for aligning parallel radionuclide depth profiles was described and applied successfully in two case studies from the continental slope off NW Africa and off Sumba Island, Indonesia. This is primarily important

  3. Sedimentation rate in the Baltic Sea

    Ilus, E.; Mattila, J.; Klemola, S.; Ikaeheimonen, T.K. [STUK Radiation and Nuclear Safety Authority (Finland); Niemisto, L. [Finnish Inst. of Marine Research (Finland)


    Varying redox conditions may affect the occurrence and concentrations of certain radionuclides in the surface layers of sediments and in near-bottom waters by causing remobilization of radionuclides from surface sediments to the overlying water and their settling back into the sediment. In recent decades about 70.000 km{sup 2} of the sea bottom in the deepest part of the Baltic Sea (about 19% of its total area) have withstood almost continuous anoxic conditions; thus, it is important to know to what extent depletion of oxygen can affect the behaviour of these radionuclides in near-bottom waters. The aim of the project was to resolve the above question in a coastal basin periodically undergoing anoxic conditions. Radioecological processes in sediments and in near-bottom water under varying redoxconditions were studied in the deep area of the Haestholmsfjaerden Bay in Loviisa (eastern Gulf of Finland) in 1995-1996. The Haestholmsfjaerden Bay is a semienclosed basin between the mainland and the archipelago and is connected with the open Gulf of Finland only through narrow, shallow sounds: In 1995, total depletion of oxygen occurred in the hypolimnion of Haestholmsfjaerden Bay during 2 periods in late summer and autumn. In 1996, oxygen conditions were the worst ever observed in the Haestholmsfjaerden deep. During early autumn anoxic conditions prevailed for more than 1 month in the near-bottom water. The highest total phosphorus and total nitrogen concentrations in the near-bottom water during these periods were 20- and 4- fold compared with the corresponding values in surface water. According to the results obtained in this project, remobilization of {sup 137}Cs and {sup 239,240}Pu from sediments to near-bottom water is negligible or non-existent in the Haestholmsfjaerden deep. If it does occur, however, it may be so slight that it is not possible to observe with the methods used in this study. Although the anoxic periods are quite short in the Haestholmsfjaerden deep

  4. Varves in lake sediments - a review

    Zolitschka, Bernd; Francus, Pierre; Ojala, Antti E. K.; Schimmelmann, Arndt


    Downcore counting of laminations in varved sediments offers a direct and incremental dating technique for high-resolution climatic and environmental archives with at least annual and sometimes even seasonal resolution. The pioneering definition of varves by De Geer (1912) had been restricted to rhythmically deposited proglacial clays. One century later the meaning of 'varve' has been expanded to include all annually deposited laminae in terrestrial and marine settings. Under favourable basin configurations and environmental conditions, limnic varves are formed due to seasonality of depositional processes from the lake's water column and/or transport from the catchment area. Subsequent to deposition of topmost laminae, the physical preservation of the accumulating varved sequence requires the sustained absence of sediment mixing, for example via wave action or macrobenthic bioturbation. Individual (sub)laminae in varved lake sediments typically express contrasting colours, always differ in terms of their organic, chemical and/or mineralogical compositions, and often also differ with regard to grain-size. Various predominating climatic and depositional conditions may result in clastic, biogenic or endogenic (incl. evaporitic) varved sediments and their mixtures. To reliably establish a varve chronology, the annual character of laminations needs to be determined and verified in a multidisciplinary fashion. Sources and influences of possible errors in varve chronologies are best determined and constrained by repeated varve counts, and by including radioisotopes and correlation with historically documented events. A well-established varve chronology greatly enhances the scientific value of laminated limnic archives by securely anchoring the wealth of multi-proxy palaeoenvironmental information in the form of time-series for multidisciplinary investigations. Applications of varved records are discussed with special reference to advances since the 1980s. These span fields

  5. A cell extraction method for oily sediments

    Lappé, M.; Kallmeyer, J.


    Hydrocarbons can be found in many different habitats and represent an important carbon source for microbes. As fossil fuels, they are an important economical resource and, through natural seepage or accidental release, they can be major pollutants. Oil sands from Alberta, Canada, and samples from the seafloor of the Gulf of Mexico represent typical examples of either natural or anthropogenically affected oily sediments. DNA-specific stains and molecular probes bind to hydrocarbons, causing massive background fluorescence and thereby massively hampering cell enumeration. The cell extraction procedure of Kallmeyer et al. (2008) separates the cells from the sediment matrix, producing a sediment free cell extract that can then be used for subsequent staining and cell enumeration under a fluorescence microscope. In principle, this technique can also be used to separate cells from oily sediments, but it was not originally optimized for this application and does not provide satisfactory results. Here we present a modified extraction method in which the hydrocarbons are removed prior to cell extraction by a solvent treatment. Due to the reduced background fluorescence the microscopic image becomes clearer, making cell identification and enumeration much easier. Consequently, the resulting cell counts from oily samples treated according to our new protocol were significantly higher than those treated according to Kallmeyer et al. (2008). We tested different amounts of a variety of solvents for their ability to remove hydrocarbons and found that n-hexane and - in samples containing more biodegraded oils - methanol, delivered the best results. Because solvents also tend to lyse cells, it was important to find the optimum solvent to sample ratio, at which the positive effect of hydrocarbon extraction overcomes the negative effect of cell lysis. A volumetric ratio of 1:2 to 1:5 between a formalin-fixed sediment slurry and solvent delivered highest cell counts. Extraction

  6. Temperature profile around a basaltic sill intruded into wet sediments

    Baker, Leslie; Bernard, Andrew; Rember, William C.; Milazzo, Moses; Dundas, Colin M.; Abramov, Oleg; Kestay, Laszlo P.


    The transfer of heat into wet sediments from magmatic intrusions or lava flows is not well constrained from field data. Such field constraints on numerical models of heat transfer could significantly improve our understanding of water–lava interactions. We use experimentally calibrated pollen darkening to measure the temperature profile around a basaltic sill emplaced into wet lakebed sediments. It is well known that, upon heating, initially transparent palynomorphs darken progressively through golden, brown, and black shades before being destroyed; however, this approach to measuring temperature has not been applied to volcanological questions. We collected sediment samples from established Miocene fossil localities at Clarkia, Idaho. Fossils in the sediments include pollen from numerous tree and shrub species. We experimentally calibrated changes in the color of Clarkia sediment pollen and used this calibration to determine sediment temperatures around a Miocene basaltic sill emplaced in the sediments. Results indicated a flat temperature profile above and below the sill, with T > 325 °C within 1 cm of the basalt-sediment contact, near 300 °C at 1–2 cm from the contact, and ~ 250 °C at 1 m from the sill contact. This profile suggests that heat transport in the sediments was hydrothermally rather than conductively controlled. This information will be used to test numerical models of heat transfer in wet sediments on Earth and Mars.

  7. Lead Speciation and Bioavailability in Apatite-Amended Sediments

    Kirk G. Scheckel


    Full Text Available The in situ sequestration of lead (Pb in sediment with a phosphate amendment was investigated by Pb speciation and bioavailability. Sediment Pb in preamendment samples was identified as galena (PbS with trace amounts of absorbed Pb. Sediment exposed to atmospheric conditions underwent conversion to hydrocerussite and anglesite. Sediments mixed with apatite exhibited limited conversion to pyromorphite, the hypothesized end product. Conversion of PbS to pyromorphite is inhibited under reducing conditions, and pyromorphite formation appears limited to reaction with pore water Pb and PbS oxidation products. Porewater Pb values were decreased by 94% or more when sediment was amended with apatite. The acute toxicity of the sediment Pb was evaluated with Hyalella azteca and bioaccumulation of Pb with Lumbriculus variegatus. The growth of H. azteca may be mildly inhibited in contaminated sediment, with apatite-amended sediments exhibiting on average a higher growth weight by approximately 20%. The bioaccumulation of Pb in L. variegatus tissue decreased with increased phosphate loading in contaminated sediment. The study indicates limited effectiveness of apatite in sequestering Pb if present as PbS under reducing conditions, but sequestration of porewater Pb and stabilization of near-surface sediment may be a feasible and alternative approach to decreasing potential toxicity of Pb.

  8. Microbial methylation of mercury in upper Wisconsin river sediments

    Callister, S.M.; Winfrey, M.R.


    The microbial methylation of Hg was studied in water and sediments from the Upper Wisconsin River by quantifying the methylation of radioactive Hg(II) (/sup 203/Hg(NO/sub 3/)/sub 2/). Methylation activity was near detection limits in the water, highest in surface sediments (0 to 4 cm), and decreased with increasing sediment depth. Methylation had a temperature optimum of 35/sup 0/C. Organically enriched sediments exhibited higher methylation activity than less eutrophic sediments. Methylation activity in sediments was stimulated by the addition of peptone but not by glucose or starch. Oxygenation of sediments inhibited methylation activity. A summertime peak in methylation activity, observed in water, floc, and sediments, was related to factors other than temperature. More than 98% of the added /sup 203/Hg(II) was bound to sediments within 4 hr of inoculation, while more than 3% was methylated during a 10-day incubation. As much as 7% of the added /sup 203/Hg(II) was methylated in other experiments, suggesting that bound Hg is available for methylation. These data suggest that organic-rich surficial sediments in the Upper Wisconsin River have the potential to produce significant amounts of toxic methylmercury during late summer months.

  9. Sediment transport and carbon sequestration characteristics along mangrove fringed coasts

    TU Qiang; YANG Shengyun; ZHOU Qiulin; YANG Juan


    Mangroves play an important role in sequestering carbon and trapping sediments. However, the effectiveness of such functions is unclear due to the restriction of knowledge on the sedimentation process across the vegetation boun-daries. To detect the effects of mangrove forests on sediment transportation and organic carbon sequestration, the granulometric and organic carbon characteristics of mangrove sediments were investigated from three vegetation zones of four typical mangrove habitats on the Leizhou Peninsula coast. Based on our results, sediment transport was often“environmentally sensitive”to the vegetation friction. A transition of the sediment transport mode from the mudflat zone to the interior/fringe zone was often detected from the cumulative frequency curve. The vegetation cover also assists the trapping of material, resulting in a significantly higher concentration of organic carbon in the interior surface sediments. However, the graphic parameters of core sediments reflected a highly temporal variability due to the sedimentation process at different locations. The sediment texture ranges widely from sand to mud, altho-ugh the sedimentary environments are restricted within the same energy level along the fluvial-marine transition zone. Based on the PCA results, the large variation was mainly attributed to either the mean grain size features or the organic carbon features. A high correlation between the depth andδ13C value also indicated an increasing storage of mangrove-derived organic carbon with time.

  10. Spatial Modelling of Sediment Transport over the Upper Citarum Catchment



    Full Text Available This paper discusses set up of a spatial model applied in Geographic Information System (GIS environment for predicting annual erosion rate and sediment yield of a watershed. The study area is situated in the Upper Citarum Catchment of West Java. Annual sediment yield is considered as product of erosion rate and sediment delivery ratio to be modelled under similar modeling tool. Sediment delivery ratio is estimated on the basis of sediment resident time. The modeling concept is based on the calculation of water flow velocity through sub-catchment surface, which is controlled by topography, rainfall, soil characteristics and various types of land use. Relating velocity to known distance across digital elevation model, sediment resident time can be estimated. Data from relevance authorities are used. Bearing in mind limited knowledge of some governing factors due to lack of observation, the result has shown the potential of GIS for spatially modeling regional sediment transport. Validation of model result is carried out by evaluating measured and computed total sediment yield at the main outlet. Computed total sediment yields for 1994 and 2001 are found to be 1.96×106 and 2.10×106tons/year. They deviate roughly 54 and 8% with respect to those measured in the field. Model response due to land use change observed in 2001 and 1994 is also recognised. Under presumably constant rainfall depth, an increase of overall average annual erosion rate of 11% resulted in an increase of overall average sediment yield of 7%.

  11. Factors Controlling Sediment Denitrification Rates in Grassland and Forest Streams

    Haryun Kim


    Full Text Available Sediment denitrification is an important nitrate (NO3- removal process from agricultural streams. The direct and indirect factors that control denitrification rates in tributary sediments can vary depending on the types of agricultural activities and vegetation. Our research investigated (1 tributary sediment denitrification rates in a grassland stream affected by pasture ecosystems and a forest stream affected by N fertilization; and (2 the environmental factors that determine denitrification rates in tributary sediments. The denitrification enzyme activity (DEA in grassland stream sediments is positively correlated with precipitation likely due to the increased nutrient exchange rates between stream water and sediments, and was higher than in forest stream sediments, leading to a decrease in NO3- concentration ([NO3-] in stream sediments. The DEA in riparian sediments was regulated by carbon concentrations and did not contribute to NO3- removal from the riparian sediment in grassland and forest streams. Thus, environmental factors affected by different types of agricultural activities and vegetation might regulate denitrification rates and [NO3-] in agricultural stream ecosystems.

  12. Quantitative Application Study on Remote Sensing of Suspended Sediment

    CHEN Yi-mei; XU Su-dong; LIN Qiang


    Quantitative application on remote sensing of suspended sediment is an important aspect of the engineering application of remote sensing study.In this paper,the Xiamen Bay is chosen as the study area.Eleven different phases of the remote sensing data are selected to establish a quantitative remote sensing model to map suspended sediment by using remote sensing images and the quasi-synchronous measured sediment data.Based on empirical statistics developed are the conversion models between instantaneous suspended sediment concentration and tidally-averaged suspended sediment concentration as well as the conversion models between surface layer suspended sediment concentration and the depth-averaged suspended sediment concentration.On this basis,the quantitative application integrated model on remote sensing of suspended sediment is developed.By using this model as well as multi-temporal remote sensing images,multi-year averaged suspended sediment concentration of the Xiamen Bay are predicted.The comparison between model prediction and observed data shows that the multi-year averaged suspended sediment concentration of studied sites as well as the concentration difference of neighboring sites can be well predicted by the remote sensing model with an error rate of 21.61% or less,which can satisfy the engineering requirements of channel deposition calculation.

  13. Toxicity of lead-contaminated sediment to mute swans

    Day, D.D.; Beyer, W.N.; Hoffman, D.J.; Morton, Alexandra; Sileo, L.; Audet, D.J.; Ottinger, M.A.


    Most ecotoxicological risk assessments of wildlife emphasize contaminant exposure through ingestion of food and water. However, the role of incidental ingestion of sediment-bound contaminants has not been adequately appreciated in these assessments. This study evaluates the toxicological consequences of contamination of sediments with metals from hard-rock mining and smelting activities. Lead-contaminated sediments collected from the Coeur d'Alene River Basin in Idaho were combined with either a commercial avian maintenance diet or ground rice and fed to captive mute swans (Cygnus olor) for 6 weeks. Experimental treatments consisted of maintenance or rice diets containing 0, 12 (no rice group), or 24% highly contaminated (3,950 ug/g lead) sediment or 24% reference (9.7 ug/g lead) sediment. Although none of the swans died, the group fed a rice diet containing 24% lead-contaminated sediment were the most severely affected, experiencing a 24% decrease in mean body weight, including three birds that became emaciated. All birds in this treatment group had nephrosis; abnormally dark, viscous bile; and significant (p poisoning in waterfowl. Body weight and hematocrit and hemoglobin concentrations in swans on control (no sediment) and reference (uncontaminated) sediment diets remained unchanged. These data provide evidence that mute swans consuming environmentally relevant concentrations of Coeur d'Alene River Basin sediment developed severe sublethal lead poisoning. Furthermore, toxic effects were more pronounced when the birds were fed lead contaminated sediment combined with rice, which closely resembles the diet of swans in the wild.

  14. Development of Fingerprinting Method in Sediment Source Studies

    Du, Pengfei; Ning, Duihu; Huang, Donghao


    Sediment source study is valuable for watershed sediment budget, sediment control in channels, soil erosion model validation and benefits evaluation of soil and water conservation. As one of the methods to make clear the sediment sources, fingerprinting has been proven effective, and hence has been adopted in different countries over the world. This paper briefly introduced the fingerprinting method in models, diagnostic sediment properties, applied regions, spatial and temporal scales, and classification of sediment source types. Combining with environmental radionuclides as the time makers (such as 137Cs and 210Pb), the sediment source history has been possible by virtue of this method. However, some uncertainties are waiting for the confirmative answers while introducing fingerprinting technique to sediment related studies: the efficient sampling strategies through linking sediment source and fingerprint properties need to be clearer, the spatial scale links (up-scaling and down-scaling) should be provided with detailed methods, the model calibration is necessary to be updated to improve the estimated precision. (This paper is a contribution to the project of National Natural Science Foundation of China (No. 41501299), the non-profit project of Ministry of Water Resources of China (No. 201501045), and the project of Youth Scientific Research of China Institute of Water Resources and Hydropower Research (Using fingerprinting technique to study sediment source in a typical small watershed of black soil region in northeast China))

  15. Hydrocarbon mineralization in sediments and plasmid incidence in sediment bacteria from the campeche bank.

    Leahy, J G; Somerville, C C; Cunningham, K A; Adamantiades, G A; Byrd, J J; Colwell, R R


    Rates of degradation of radiolabeled hydrocarbons and incidence of bacterial plasmid DNA were investigated in sediment samples collected from the Campeche Bank, Gulf of Mexico, site of an offshore oil field containing several petroleum platforms. Overall rates of mineralization of [C]hexadecane and [C]phenanthrene measured for sediments were negligible; <1% of the substrate was converted to CO(2) in all cases. Low mineralization rates are ascribed to nutrient limitations and to lack of adaptation by microbial communities to hydrocarbon contaminants. Plasmid frequency data for sediment bacteria similarly showed no correlation with proximity to the oil field, but, instead, showed correlation with water column depth at each sampling site. Significant differences between sites were observed for proportion of isolates carrying single or multiple plasmids and mean number of plasmids per isolate, each of which increased as a function of depth.

  16. Cyclicity of sedimentation and physical properties of the bottom sediments in artificial reservoirs

    Karnaukhova, G. A.


    The interrelation between the sedimentation rate and the dynamics of the formation of physical properties of the bottom sediments on the basis of recording their temporal cycles under oscillation of the water level was studied from the example of the Bratsk Reservoir, which is one of the world's largest artificial reservoirs. It is established that its exploitation regime promotes the formation of striking intercalation of the regional transgressions and regressions mainly controlled by the water level of the reservoir, which leads to cyclic formation of the complex of the bottom sediments and their physical properties. Four cycles were identified during formation of the sedimentary complex, each of which consists of three or two phases.

  17. Toxicity and Geochemistry of Missouri Cave Stream Sediments

    Lawler, C. A.; Besser, J.; Wicks, C. M.


    Water and sediment quality are among the most important variables affecting the survival of stygobites. In Tumbling Creek Cave, Taney County Missouri the population of the endangered cave snail, Antrobia culveri, has declined significantly over the past decade. The cause of the population decline is unknown but could be related to the quality of streambed sediment in which the cave snail lives. The objective of this study was to determine the toxicity and concentrations of heavy metals in the sediment of Tumbling Creek Cave and five other caves in Missouri. These sediments were analyzed to assess possible point sources from within the recharge areas of the caves and to provide baseline geochemical data to which Tumbling Creek Cave sediments could be compared. Standard sediment toxicity tests and ICP-MS analysis for heavy metals were conducted. Survival and reproduction of the amphipod, Hyalella azteca, did not differ significantly between cave sediments and a control sediment. However the growth of amphipods differed significantly among sites and was significantly reduced in sediments from Tumbling Creek Cave relative to controls. Concentrations of several metals in sediments differed substantially among locations, with elevated levels of zinc and copper occurring in Tumbling Creek Cave. However, none of the measured metal concentrations exceeded sediment quality guidelines derived to predict probable effects on benthic organisms and correlations between sediment metal concentrations and toxicity endpoints were generally weak. While elevated metal levels may play a part in the cave snail's decline, other factors may be of equal or greater importance. Ongoing analyses of persistent organic contaminants and total organic carbon in cave sediments, along with continued water quality monitoring, may provide data that will allow us to better understand this complicated problem.

  18. Rainfall, runoff and sediment transport in a Mediterranean mountainous catchment.

    Tuset, J; Vericat, D; Batalla, R J


    The relation between rainfall, runoff, erosion and sediment transport is highly variable in Mediterranean catchments. Their relation can be modified by land use changes and climate oscillations that, ultimately, will control water and sediment yields. This paper analyses rainfall, runoff and sediment transport relations in a meso-scale Mediterranean mountain catchment, the Ribera Salada (NE Iberian Peninsula). A total of 73 floods recorded between November 2005 and November 2008 at the Inglabaga Sediment Transport Station (114.5 km(2)) have been analysed. Suspended sediment transport and flow discharge were measured continuously. Rainfall data was obtained by means of direct rain gauges and daily rainfall reconstructions from radar information. Results indicate that the annual sediment yield (2.3 t km(-1) y(-1) on average) and the flood-based runoff coefficients (4.1% on average) are low. The Ribera Salada presents a low geomorphological and hydrological activity compared with other Mediterranean mountain catchments. Pearson correlations between rainfall, runoff and sediment transport variables were obtained. The hydrological response of the catchment is controlled by the base flows. The magnitude of suspended sediment concentrations is largely correlated with flood magnitude, while sediment load is correlated with the amount of direct runoff. Multivariate analysis shows that total suspended load can be predicted by integrating rainfall and runoff variables. The total direct runoff is the variable with more weight in the equation. Finally, three main hydro-sedimentary phases within the hydrological year are defined in this catchment: (a) Winter, where the catchment produces only water and very little sediment; (b) Spring, where the majority of water and sediment is produced; and (c) Summer-Autumn, when little runoff is produced but significant amount of sediments is exported out of the catchment. Results show as land use and climate change may have an important

  19. The Changjiang sediment flux into the seas: measurability and predictability

    Daowei YIN; Zhongyuan CHEN


    This paper examines the credibility and predictability of sediment flux of the Changjiang River that has discharged into the seas on the basis of historical database. The assumption of the study stands on the lack of sufficient observation data of suspended sediment con-centration (SSC) during peaking flood period, which most likely results in the application of an inappropriate method to the downstream-most Datong hydrological gauging station in the Changjiang basin. This insufficient method (only 30-50 times of SSC observation per year), that obviously did not cover the peaking SSC during peaking floods, would lead to an inaccuracy in estimating the Changjiang sediment load by 4.7×108t/a (multiyearly)into the seas. Also, sediment depletion that often takes place upstream of the Changjiang basin has, to some extent, lowered the credibility of traditional sediment rating curve that has been used for estimating sediment budget. A newly-established sediment rating curve of the present study is proposed to simulate the sediment flux/load into the seas by using those SSC only under discharge of 60000ma/s at the Datong station-the threshold to significantly correlate to SSC. Since discharge of 60000-80000 m3/s is often linked to extreme flood events and associated sediment depletion in the basin, un-incorporating SSC of 60000-80000 m3/s into the sediment rating curve will increase the credibility for sediment load estimation. Using this approach of the present study would indicate the sediment load of 3.3 × 108-6.6× 108 t/a to the seas in the past decades. Also, our analytical result shows a lower sediment flux pattern in the 1950s, but higher pattern in the 1960 s-1980 s, reflecting the changes in land-use in the upstream of Changjiang basin, including widely devastated deforestation during the middle 20th century.

  20. Small ecosystem engineers as important regulators of lake's sediment respiration.

    Baranov, Victor; Lewandowski, Joerg; Krause, Stefan; Romeijn, Paul


    Although shallow lakes are covering only about 1.5% of the land surface of the Earth, they are responsible for sequestration of carbon amounts similar or even larger than those sequestered in all marine sediments. One of the most important drivers of the carbon sequestration in lakes is sediment respiration. Especially in shallow lakes, bioturbation, i.e. the biogenic reworking of the sediment matrix and the transport of fluids within the sediment, severely impacts on sediment respiration. Widespread freshwater bioturbators such as chironomid larvae (Diptera, Chironomidae) are building tubes in the sediment and actively pump water through their burrows (ventilation). In the present work we study how different organism densities and temperatures (5-30°C) impact on respiration rates. In a microcosm experiment the bioreactive resazurin/resorufin smart tracer system was applied for quantifying the impacts of different densities of Chironomidae (Diptera) larvae (0, 1000, 2000 larvae/m2) on sediment respiration. Tracer transformation rates (and sediment respiration) were correlated with larval densities with highest transformation rates occurring in microcosms with highest larval densities. Respiration differences between defaunated sediment and sediment with 1000 and 2000 larvae per m2 was insignificant at 5 °C, and was progressively increasing with rising temperatures. At 30 °C respiration rates of sediment with 2000 larvae per m2 was 4.8 times higher than those of defaunated sediment. We interpret this as an effect of temperature on larval metabolic and locomotory activity. Furthermore, bacterial communities are benefiting from the combination of the high water temperatures and bioirrigation as bacterial community are able to maintain high metabolic rates due to oxygen supplied by bioirrigation. In the context of global climate change that means that chironomid ecosystem engineering activity will have a profound and increasing impact on lake sediment respiration