WorldWideScience

Sample records for stellite 6 deloro

  1. Friction surfaced Stellite6 coatings

    International Nuclear Information System (INIS)

    Rao, K. Prasad; Damodaram, R.; Rafi, H. Khalid; Ram, G.D. Janaki; Reddy, G. Madhusudhan; Nagalakshmi, R.

    2012-01-01

    Solid state Stellite6 coatings were deposited on steel substrate by friction surfacing and compared with Stellite6 cast rod and coatings deposited by gas tungsten arc and plasma transferred arc welding processes. Friction surfaced coatings exhibited finer and uniformly distributed carbides and were characterized by the absence of solidification structure and compositional homogeneity compared to cast rod, gas tungsten arc and plasma transferred coatings. Friction surfaced coating showed relatively higher hardness. X-ray diffraction of samples showed only face centered cubic Co peaks while cold worked coating showed hexagonally close packed Co also. - Highlights: ► Stellite6 used as coating material for friction surfacing. ► Friction surfaced (FS) coatings compared with casting, GTA and PTA processes. ► Finer and uniformly distributed carbides in friction surfaced coatings. ► Absence of melting results compositional homogeneity in FS Stellite6 coatings.

  2. Self-welding evaluation of stellite 6 and stellite 156 in flowing sodium

    International Nuclear Information System (INIS)

    Chang, J.Y.; Schrock, S.L.; Johnson, R.N.

    1977-01-01

    The self-welding behavior of two similar materials, Stellite 6 and Stellite 156, in sodium are discussed. The materials were tested at temperatures from 850 to 1140 0 F for time periods up to six-months while immersed in flowing sodium. Contact stresses ranged from 6000 psi to 16,000 psi on contact areas from 0.35 to 0.47 square inches. All separation tests to determine the extent of self-welding were conducted in a tensile mode. The surface morphologies of the samples before and after each test were measured. At temperatures of 1115 0 F and above, almost all the Stellite 6 specimens indicated a significant tendency toward self-welding within a relatively short period of time (one week). Stellite 156 couples also developed a strong self-weld bond at 1060 0 F after six-month exposure

  3. Radiation-induced corrosion of stellite-6

    International Nuclear Information System (INIS)

    Behazin, M.; Wren, J.C.

    2012-09-01

    Stellite-6 is a Co-based (58%) alloy that is used for components that require high wear-resistance, such as valve facings and ball bearings in nuclear reactors. In the reactor core, stable 59 Co can be neutron activated by absorption of a neutron to become the radioactive isotope, 60 Co. The 60 Co that is created constitutes a safety hazard for plant workers who have to perform maintenance on the reactor. One of the operational and safety issues in a nuclear reactor is the potential corrosion of Co-based alloys and the introduction of dissolved Co ions into the reactor core. While the corrosion of Stellite-6 has been studied its corrosion behaviour with ionizing radiation present has not been well established. Corrosion kinetics depend on both the aqueous redox conditions and the physical and chemical nature of the alloy surface. The high radiation fields present in a reactor core will cause water to decompose to a range of redox-active species (both highly oxidizing (e.g., ·OH, H 2 O 2 ) and highly reducing (e.g., ·eaq - , ·O 2 - )). These species can significantly influence corrosion kinetics. The effect of γ-radiation on the corrosion of Stellite-6 at pH 10.6 was investigated at temperatures ≤ 150 deg. C. Since the corrosion rate depends strongly on the type of oxide that is present on the material surface, the focus of this corrosion study was to establish the mechanism by which radiolysis affects the nature of the oxide that is present on Stellite-6. The results show that γ-radiation (at a dose rate of 5.5 kGy.h -1 ) increases the corrosion potential on Stellite-6 from -0.7 VSCE to 0.12 VSCE . The corrosion potential without irradiation present is in a potential range where oxidation is limited to the formation of a Co (OH) 2 and CoCr 2 O 4 outer oxide layer on a pre-existing Cr 2 O 3 film. The corrosion potential with irradiation is in a potential range where further oxidation of Co (OH) 2 to CoOOH also occurs. However, since CoOOH is less soluble than

  4. Status of Stellite 6 friction testing

    International Nuclear Information System (INIS)

    Watkins, J.C.; DeWall, K.G.

    1998-01-01

    For the past several years, researchers at the Idaho National Engineering and Environmental Laboratory, under the sponsorship of the US Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, have been investigating the performance of motor-operated valves subjected to design basis flow and pressure loads. Part of this research addresses the friction that occurs at the interface between the valve disc and the valve body seats during operation of a gate valve. In most gate valves, these surfaces are hardfaced with Stellite 6, a cobalt-based alloy. Analytical methods exist for predicting the thrust needed to operate these valves at specific pressure conditions. To produce accurate valve thrust predictions, the analyst must have a reasonably accurate, though conservative, estimate of the coefficient of friction at the disc-to-seat interface. One of the questions that remains to be answered is whether, and to what extent, aging of the disc and seat surfaces effects the disc-to-seat coefficient of friction. Specifically, does the environment in a nuclear plants piping system cause the accumulation of an oxide film on these surfaces that increases the coefficient of friction; and if so, how great is the increase? This paper presents results of specimen tests addressing this issue, with emphasis on the following: (1) the characteristics and thickness of the oxide film that develops on Stellite 6 as it ages; (2) the change in the friction coefficient of Stellite 6 as it ages, including the question of whether the friction coefficient eventually reaches a plateau; and (3) the effect in-service cycling has on the characteristics and thickness of the oxide film and on the friction coefficient

  5. Influence of laser irradiation on deposition characteristics of cold sprayed Stellite-6 coatings

    Science.gov (United States)

    Li, Bo; Jin, Yan; Yao, Jianhua; Li, Zhihong; Zhang, Qunli; Zhang, Xin

    2018-03-01

    Depositing hard materials such as Stellite-6 solely by cold spray (CS) is challengeable due to limited ability of plastic deformation. In this study, the deposition of Stellite-6 powder was achieved by supersonic laser deposition (SLD) which combines CS with synchronous laser irradiation. The surface morphology, deposition efficiency, track shape of Stellite-6 coatings produced over a range of laser irradiation temperatures were examined so as to reveal the effects of varying laser energy inputting on the deposition process of high strength material. The microstructure, phase composition and wear/corrosion resistant properties of the as-deposited Stellite-6 coatings were also investigated. The experimental results demonstrate that the surface flatness and deposition efficiency increase with laser irradiation temperature due to the softening effect induced by laser heating. The as-deposited Stellite-6 tracks show asymmetric shapes which are influenced by the relative configuration of powder stream and laser beam. The SLD coatings can preserve the original microstructure and phase of the feedstock material due to relatively low laser energy inputting, which result in the superior wear/corrosion resistant properties as compared to the counterpart prepared by laser cladding.

  6. The Basics of Stellites in Machining Perspective

    Directory of Open Access Journals (Sweden)

    Md Shahanur Hasan

    2016-12-01

    Stellite 6 using coated carbide inserts is presented in this paper. Interesting facts on the residual stresses induced by machining processes in Stellite 6 are revealed and analysed. The microhardness variation of machined surfaces of stellite 6 using different tool geometries is investigated in this research review.  It is revealed that coated carbide inserts with a medium-size nose radius perform better in respect of hardness changes and heat generation, producing minimum phase changes on machined surfaces of stellite 6.

  7. Powder injection molding of Stellite 6 powder: Sintering, microstructural and mechanical properties

    International Nuclear Information System (INIS)

    Gülsoy, H. Özkan; Özgün, Özgür; Bilketay, Sezer

    2016-01-01

    The purpose of this study was to produce Co-based Stellite 6 superalloy components by using the method of Powder Injection Molding (PIM) and to characterize the microstructural and mechanical properties of the produced components. The experimental studies were started through the formation of feedstock by mixing Stellite 6 powder with a multicomponent binder system. Prepared feedstock was formed by utilizing powder injection molding technique. Then the molded samples were subjected to the solvent and thermal debinding processes. Different sintering cycles were applied to the raw components for the purpose of determining the optimum sintering conditions. The densities of the sintered components were determined in accordance with the Archimedes' principle. The microstructural characterization was performed through scanning electron microscope (SEM) analysis, energy dispersive spectrometry (EDS) analyses, and X-ray diffraction (XRD) analysis. Hardness measurement and tensile test were conducted in order to determine the mechanical properties. The results illustrated that the injection molded Stellite 6 components were composed of fine and equiaxed grains, plenty of carbide precipitates exhibiting homogenous distribution throughout the microstructure formed at the grain boundaries and thus the mechanical properties were considerably high.

  8. Machinability of Stellite 6 hardfacing

    Directory of Open Access Journals (Sweden)

    Dudzinski D.

    2010-06-01

    Full Text Available This paper reports some experimental findings concerning the machinability at high cutting speed of nickel-base weld-deposited hardfacings for the manufacture of hot tooling. The forging work involves extreme impacts, forces, stresses and temperatures. Thus, mould dies must be extremely resistant. The aim of the project is to create a rapid prototyping process answering to forging conditions integrating a Stellite 6 hardfacing deposed PTA process. This study talks about the dry machining of the hardfacing, using a two tips machining tool and a high speed milling machine equipped by a power consumption recorder Wattpilote. The aim is to show the machinability of the hardfacing, measuring the power and the tip wear by optical microscope and white light interferometer, using different strategies and cutting conditions.

  9. Measuring Dilution and Wear for Laser Cladding of Stellite 6 Produced on a P91 Steel Substrate using Two Different Heat Inputs

    Directory of Open Access Journals (Sweden)

    Kusmoko Alain

    2016-01-01

    Full Text Available Stellite 6 was deposited by laser cladding on a P91 substrate with energy inputs of 1 kW (P91-1 and 1.8 kW (P91–1.8. The chemical compositions, microstructures and surface roughnesses of these coatings were characterized by atomic absorption spectroscopy, scanning electron microscopy and atomic force microscopy. The microhardness of the coatings was measured and the wear mechanism of the coatings was evaluated using a pin-on-plate (reciprocating wear testing machine. The results showed less cracking and pore development for Stellite 6 coatings applied to the P91 steel substrate with the lower heat input (P91–1. Further, the Stellite coating for P91-1 was significantly harder than that obtained for P91–1.8. The wear test results indicated that the weight loss for P91–1 was much lower than for P91–1.8. The surface topography data indicated that the surface roughness for P91-1 was much lower than for P91–1.8. The measurements of dilution and carbon content showed that P91–1 has lower dilution and higher concentration of carbon than P91–1.8. It is concluded that the lower hardness of the coating for P91–1.8, together with the softer underlying substrate structure, markedly reduced the wear resistance of the Stellite 6 coating and the lower hardness of the coating for P91-1.8 was due to higher level of dilution and lower concentration of carbon.

  10. Laser Clad and HVOF-Sprayed Stellite 6 Coating in Chlorine-Rich Environment with KCl at 700 °C.

    Czech Academy of Sciences Publication Activity Database

    Pala, Z.; Bai, M.; Lukáč, František; Hussain, T.

    2017-01-01

    Roč. 88, 5-6 (2017), s. 749-771 ISSN 0030-770X Institutional support: RVO:61389021 Keywords : Stellite 6 * KCl * High-temperature corrosion * HVOF * Laser cladding Subject RIV: JK - Corrosion ; Surface Treatment of Materials OBOR OECD: Coating and films Impact factor: 1.196, year: 2016 https://link.springer.com/article/10.1007/s11085-017-9776-7

  11. Source term reduction at DAEC (including stellite ball recycling)

    International Nuclear Information System (INIS)

    Smith, R.; Schebler, D.

    1995-01-01

    The Duane Arnold Energy Center was seeking methods to reduce dose rates from the drywell due to Co-60. Duane Arnold is known in the industry to have one of the highest drywell dose rates from the industry standardized 'BRAC' point survey. A prime method to reduce dose rates due to Co-60 is the accelerated replacement of stellite pins and rollers in control rod blades due to their high stellite (cobalt) content. Usually the cobalt content in alloys of stellite is greater than 60% cobalt by weight. During the RFO-12 refueling outage at Duane Arnold, all of the remaining cobalt bearing control rod blades were replaced and new stellite free control rod blades were installed in the core. This left Duane Arnold with the disposal of highly radioactive stellite pins and rollers. The processing of control rod blades for disposal is a very difficult evolution. First, the velocity limiter (a bottom portion of the component) and the highly radioactive upper stellite control rod blade ins and rollers are separated from the control rod blade. Next, the remainder of the control rod blade is processed (chopped and/or crushed) to aid packaging the waste for disposal. The stellite bearings are then often carefully placed in with the rest of the waste in a burial liner to provide shielding for disposal or more often are left as 'orphans' in the spent fuel pool because their high specific activity create shipping and packaging problems. Further investigation by the utility showed that the stellite balls and pins could be recycled to a source manufacturer rather than disposed of in a low-level burial site. The cost savings to the utility was on the order of $200,000 with a gross savings of $400,000 in savings in burial site charges. A second advantage of the recycling of the stellite pins and rollers was a reduction in control in radioactive waste shipments

  12. Microstructure and sliding wear properties of HVOF sprayed, laser remelted and laser clad Stellite 6 coatings

    Czech Academy of Sciences Publication Activity Database

    Houdková, Š.; Pala, Zdeněk; Smazalová, E.; Vostřák, M.; Česánek, Z.

    2017-01-01

    Roč. 318, May (2017), s. 129-141 ISSN 0257-8972. [International Meeting on Thermal Spraying (RIPT)/7./. Limoges, 09.12.2015-11.12.2015] Institutional support: RVO:61389021 Keywords : Stellite 6 * HVOF * Laser remelting * Laser clad * Wear * Phase transformation Subject RIV: JK - Corrosion ; Surface Treatment of Materials OBOR OECD: Coating and films Impact factor: 2.589, year: 2016 http://www.sciencedirect.com/science/ article /pii/S0257897216308817

  13. Study on Co-free amorphous material cladding using a laser beam to improve the resistance of primary system parts in NPPs to wear/erosion-corrosion

    International Nuclear Information System (INIS)

    Kim, J. S.; Woo, S. S.; Seo, J. H.

    2001-01-01

    A study on Co-free amorphous material, ARMACOR M, cladding using a laser beam has been performed to improve resistance of the primary system main parts on nuclear power plants to wear/erosion-corrosion. The wear/erosion-corrosion properties of ARMACRO M cladded speciemens were characterized in air at room temperature and 300 .deg. C and in air at room temperature, and compared to those of other hardfacing materials, such as Stellite 6, NOREM 02, Deloro 50, TIG-welde or laer cladded. According to the results, ARMACOR M laser-cladded specimen showed to have the highest resistance to wear/erosion-corrosion

  14. The effect of conditioning by permanganate on the dissolution behavior of stellite particles in organic complexing acid medium

    International Nuclear Information System (INIS)

    Subramanian, V.; Chandramohan, P.; Srinivasan, M.P.; Sukumar, A.A.; Raju, V.S.; Velmurugan, S.; Narasimhan, S.V.

    2004-01-01

    Radioactive hotspots found either in the primary heat transport circuit or auxiliary circuits of nuclear reactors are mainly due to particles containing activated cobalt. The main source of these particles are stellite alloys that are rich in cobalt and are used in primary cooling circuits in valves, pumps, etc. Due to either mechanical erosion or erosion coupled with corrosion under flow conditions (known as tribocorrosion), these stellite particles are released into the system. They are then activated by neutron absorption in the reactor core before being deposited on out-of-core surfaces, causing radiation exposure problems. In this paper, the possibility of dissolving stellite particles by using an oxidation-complexation process has been explored. Permanganate based reagents were evaluated for their efficiency in conditioning the stellite particles for their dissolution with organic acids. Permanganic acid was found to be the superior conditioning agent. Two alloys of stellite, viz. stellites no. 3 and no. 6, were studied with respect to their dissolution behavior

  15. Evaluation of a process for the decontamination of radioactive hotspots due to activated stellite particles

    International Nuclear Information System (INIS)

    Subramanian, Veena; Chandramohan, Palogi; Chandran, Sinu; Srinivasan, Madapusi P.; Rangarajan, Srinivasan; Velmurugan, Sankaralingam; Narasimhan, Sevilmedu V.

    2011-01-01

    Some of the Indian pressurized heavy water reactors (PHWRs) which use Stellite balls in the ball and screw mechanism of the adjustor rod drive mechanism in the moderator circuit have encountered high radiation fields in the moderator system due to 60 Co. Release of particulate Stellite is responsible for the hotspots in addition to the general uniform contamination of internal surfaces with 60 Co. Extensive laboratory studies have shown that it is possible to dissolve these Stellite particles by adopting a three-step redox process with permanganic acid as the oxidizing agent. These investigations with inactive Stellite in powder form helped to optimize the process conditions. Permanganic acid was found to have the highest dissolution efficiency as compared to alkaline and nitric acid permanganate. The susceptibility of Stellite to corrode or dissolve was found to depend on the concentration of the permanganate, pH and temperature of the process and microstructure of the Stellite alloy. This process was evaluated for its effectiveness on components from nuclear power plants. Component decontamination was carried out on adjustor rod drive assemblies which had 60 Co activity due to Stellite particles with the radiation field ranging from 3 R . h -1 to 20 R . h -1 . They were subjected to decontamination with permanganic acid as the oxidizing agent, followed by citric acid and a solution containing ethylenediaminetetraacetic acid, ascorbic acid and citric acid in a 4:3:3 ratio by weight as the reducing formulation. In the first trial, one adjustor rod drive mechanism was subjected to decontamination. After two cycles of treatment, an average decontamination factor (DF) of 6.8, with a maximum DF of 11.7, was achieved. The same process but with one cycle was repeated on eight more adjustor rod drive mechanisms. 60 Co activity in the range of 13-93 mCi was removed from these adjustor rods. Loose contamination of the order of 30 000-40 000 decays per min and cm 2 observed

  16. Evaluation of a process for the decontamination of radioactive hotspots due to activated stellite particles

    Energy Technology Data Exchange (ETDEWEB)

    Subramanian, Veena; Chandramohan, Palogi; Chandran, Sinu; Srinivasan, Madapusi P.; Rangarajan, Srinivasan; Velmurugan, Sankaralingam; Narasimhan, Sevilmedu V. [BARC Facilities, Kalpakkam, Tamil Nadu (India). Water and Steam Chemistry Div.

    2011-06-15

    Some of the Indian pressurized heavy water reactors (PHWRs) which use Stellite balls in the ball and screw mechanism of the adjustor rod drive mechanism in the moderator circuit have encountered high radiation fields in the moderator system due to {sup 60}Co. Release of particulate Stellite is responsible for the hotspots in addition to the general uniform contamination of internal surfaces with {sup 60}Co. Extensive laboratory studies have shown that it is possible to dissolve these Stellite particles by adopting a three-step redox process with permanganic acid as the oxidizing agent. These investigations with inactive Stellite in powder form helped to optimize the process conditions. Permanganic acid was found to have the highest dissolution efficiency as compared to alkaline and nitric acid permanganate. The susceptibility of Stellite to corrode or dissolve was found to depend on the concentration of the permanganate, pH and temperature of the process and microstructure of the Stellite alloy. This process was evaluated for its effectiveness on components from nuclear power plants. Component decontamination was carried out on adjustor rod drive assemblies which had {sup 60}Co activity due to Stellite particles with the radiation field ranging from 3 R . h{sup -1} to 20 R . h{sup -1}. They were subjected to decontamination with permanganic acid as the oxidizing agent, followed by citric acid and a solution containing ethylenediaminetetraacetic acid, ascorbic acid and citric acid in a 4:3:3 ratio by weight as the reducing formulation. In the first trial, one adjustor rod drive mechanism was subjected to decontamination. After two cycles of treatment, an average decontamination factor (DF) of 6.8, with a maximum DF of 11.7, was achieved. The same process but with one cycle was repeated on eight more adjustor rod drive mechanisms. {sup 60}Co activity in the range of 13-93 mCi was removed from these adjustor rods. Loose contamination of the order of 30 000-40 000

  17. Failure Mechanism of a Stellite Coating on Heat-Resistant Steel

    Science.gov (United States)

    Wang, Dong; Zhao, Haixing; Wang, Huang; Li, Yuyan; Liu, Xia; He, Guo

    2017-09-01

    The Stellite 21 coating on the heat-resistant steel X12CrMoWVNbN10-1-1 (so-called COSTE) used in a steam turbine valve was found to be fatigue broken after service at around 873 K (600 °C) for about 8 years. In order to investigate the failure mechanism, a fresh Stellite 21 coating was also prepared on the same COSTE steel substrate by using the similar deposition parameters for comparison. It was found that the Stellite 21 coating was significantly diluted by the steel, resulting in a thin Fe-rich layer in the coating close to the fusion line. Such high Fe concentration together with the incessant Fe diffusion from the steel substrate to the coating during the service condition (about 873 K (600 °C) for long time) induced the eutectoid decomposition of the fcc α-Co(Fe,Cr,Mo) solid solution, forming an irregular eutectoid microstructure that was composed of the primitive cubic α'-FeCo(Cr,Mo) phase and the tetragonal σ-CrCo(Fe,Mo) phase. The brittle nature of such α'/ σ eutectoid microstructure contributed to the fatigue fracture of the Stellite 21 coating, resulting in an intergranular rupture mode.

  18. Fabrication and Tests of M240 Machine Gun Barrels Lined with Stellite 25

    Science.gov (United States)

    2016-04-01

    ARL-TR-7662 ● APR 2016 US Army Research Laboratory Fabrication and Tests of M240 Machine Gun Barrels Lined with Stellite 25...Fabrication and Tests of M240 Machine Gun Barrels Lined with Stellite 25 by William S de Rosset and Sean Fudger Weapons and Materials Research...

  19. Evaluation of a process for the decontamination of radioactive hotspots due to activated stellite particles

    International Nuclear Information System (INIS)

    Subramanian, V.; Chandramohan, P.; Srinivasan, M.P.; Rangarajan, S.; Velmurugan, S.; Narasimhan, S.V.; Khandelwal, R.C.

    2010-01-01

    Some of the Indian PHWRs which used stellite balls in the ball and screw mechanism of the adjustor rod drive mechanism in the moderator circuit encountered high radiation field in moderator system due to 60 Co. Release of particulate stellite was responsible for the hotspots besides the general uniform contamination of internal surfaces with 60 Co. Extensive laboratory studies have shown that it is possible to dissolve these stellite particles by adopting a three step redox process with permanganic acid as the oxidizing agent. These investigations with inactive stellite in powder form helped to optimize the process conditions. Permanganic acid was found to have the highest dissolution efficiency as compared to alkaline and nitric acid permanganate. The concentration of the permanganate was also found to be an important factor in deciding the efficiency of the dissolution of stellite. The efficiency of dissolution as a function of permanganic acid concentration showed a maximum. This process was evaluated for its effectiveness on components from nuclear power plants. Component decontamination was carried out on adjustor rod drive assemblies which had 60 Co activity due to stellite particles with the radiation field ranging from 3 R/h to 20 R/h. They were subjected to decontamination with permanganic acid as oxidizing agent, followed by citric acid and a solution containing EDTA, ascorbic acid and citric acid in 4:3:3 ratio by weight (EAC) as reducing formulations. A test rig was fabricated for this purpose. In the first trial, one adjustor rod drive mechanism was subjected to decontamination. After two cycles of treatment, an average decontamination factor (DF) of 6.8, with a maximum DF of 11.7 was achieved. The same process but one cycle was repeated on eight more adjustor rod drive mechanisms. 60 Co activity in the range of 13 - 93 mCi was removed from these adjustor rods. Loose contamination of the order of 30000 - 40000 dpm/cm 2 observed before decontamination

  20. Effect of co-free valve on activity reduction in PWR

    International Nuclear Information System (INIS)

    Bahn, C.B.; Han, B.C.; Bum, J.S.; Hwang, I.S.; Lee, C.B.

    2002-01-01

    Radioactive nuclei, such as 68 Co and 60 Co, deposited on out-of-core surfaces in a pressurized water reactor (PWR) primary coolant system, are major sources of occupational radiation exposure to plant maintenance personnel and act as costly impediment to prompt and effective repairs. Valve hardfacing alloys exposed to primary coolant are considered as one of the main Co sources. To evaluate the Co-free valve, such as NOREM 02 and Deloro 50, the candidates for the alternative to Stellite 6, in a simulated PWR primary condition, SNU corrosion test loop (SCOTL) was constructed. For gate valves hard-faced with made of NOREM 02 and Deloro 50 hot cycling tests were conducted for up to 2,000 on-off cycles with cold leak tests at 1,000 cycle interval. It was observed that the leak rate of NOREM 02 (Fe-base) did not satisfy the nuclear grade valve leak criteria. After 1000 cycles test, while there was no leakage in case of Deloro 50 (Ni-base). Also, Deloro 50 showed no leakage after 2000 cycles. To estimate the activity reduction effect, we modified CRUDSIM-MIT which modeled the effects of coolant chemistry on the crud transport and activity buildup in the primary system of PWR. In the new code, crud evaluation and assessment (CREAT), 60 Co activity buildup prediction includes 1) Co-base valve replacement effect, 2) Co-base valve maintenance effect, and 3) control rod drive mechanism (CRDM) and main coolant pump (MCP) shaft contribution. CREAT predicted that the main contributor of Co activity buildup was the corrosion-induced release of Co from the steam generator (SG) tubing. With new SG's tubed with alloy 690, Korean Next Generation Reactor (APR-1400) is expected to have about 64% lower Co activity on SG surface. The use of all Co-free valves is expected to cut additional 8% of activity which is only marginal. (authors)

  1. Evaluation of a process for the decontamination of radioactive hotspots due to activated stellite particles

    Energy Technology Data Exchange (ETDEWEB)

    Subramanian, V.; Chandramohan, P.; Srinivasan, M.P.; Rangarajan, S.; Velmurugan, S.; Narasimhan, S.V., E-mail: svn@igcar.gov.in [BARC Facilities, Water and Steam Chemistry Div., Kalpakkam, Tamilnadu (India); Khandelwal, R.C. [Kakrapara Atomic Power Station, KAPS, Surat, Gujarat (India)

    2010-07-01

    Some of the Indian PHWRs which used stellite balls in the ball and screw mechanism of the adjustor rod drive mechanism in the moderator circuit encountered high radiation field in moderator system due to {sup 60}Co. Release of particulate stellite was responsible for the hotspots besides the general uniform contamination of internal surfaces with {sup 60}Co. Extensive laboratory studies have shown that it is possible to dissolve these stellite particles by adopting a three step redox process with permanganic acid as the oxidizing agent. These investigations with inactive stellite in powder form helped to optimize the process conditions. Permanganic acid was found to have the highest dissolution efficiency as compared to alkaline and nitric acid permanganate. The concentration of the permanganate was also found to be an important factor in deciding the efficiency of the dissolution of stellite. The efficiency of dissolution as a function of permanganic acid concentration showed a maximum. This process was evaluated for its effectiveness on components from nuclear power plants. Component decontamination was carried out on adjustor rod drive assemblies which had {sup 60}Co activity due to stellite particles with the radiation field ranging from 3 R/h to 20 R/h. They were subjected to decontamination with permanganic acid as oxidizing agent, followed by citric acid and a solution containing EDTA, ascorbic acid and citric acid in 4:3:3 ratio by weight (EAC) as reducing formulations. A test rig was fabricated for this purpose. In the first trial, one adjustor rod drive mechanism was subjected to decontamination. After two cycles of treatment, an average decontamination factor (DF) of 6.8, with a maximum DF of 11.7 was achieved. The same process but one cycle was repeated on eight more adjustor rod drive mechanisms. {sup 60}Co activity in the range of 13 - 93 mCi was removed from these adjustor rods. Loose contamination of the order of 30000 - 40000 dpm/cm{sup 2} observed

  2. Optimization of pulsed TIG cladding process of stellite alloy on carbon steel using RSM

    Energy Technology Data Exchange (ETDEWEB)

    Madadi, F., E-mail: f.madadi@ma.iut.ac.ir [Department of Materials Engineering, Isfahan University of Technology, Isfahan 8415683111 (Iran, Islamic Republic of); Ashrafizadeh, F. [Department of Materials Engineering, Isfahan University of Technology, Isfahan 8415683111 (Iran, Islamic Republic of); Shamanian, M., E-mail: shamanian@cc.iut.ac.ir [Department of Materials Engineering, Isfahan University of Technology, Isfahan 8415683111 (Iran, Islamic Republic of)

    2012-01-05

    Highlights: > This study is useful to optimize the welding process variables in order to control the heat input and cooling rates such that the hardness and dilution of the clad could be estimated. > Central composite rotatable design technique with five-level, four-factor full-factorial design matrix and mathematical models was used to predict hardness and dilution of pulsed gas tungsten arc weld cladding of stellite6 on carbon steel with high accuracy. > The welding current is an effective parameter affecting heat input and melting. In this regard, it is the most important process parameter which influences the dilution. Increase welding current leads to increase in dilution percentage and vice versa. The effect of percentage on time is less important when compared to the other factors. > The results predicted by mathematical models were close to those obtained by experiments. The confirmation tests also indicated high correlation between the mentioned values. > All of the chosen pulse GTAW parameters were significant and showed a noticeable influence on clad dilution. - Abstract: Stellite 6 is a cobalt-base alloy which is resistant to wear and corrosion and retains these properties at high temperatures. The exceptional wear resistance of Stellite 6 is mainly due to the unique inherent characteristics of the hard carbides dispersed in a Co-Cr alloy matrix. In this study, pulsed tungsten inert gas (TIG) cladding process was carried out to deposit Stellite 6 on plain carbon steel plate. The beneficial effects of this cladding process are low heat input, low distortion, controlled weld bead volume, less hot cracking tendency, less absorption of gases by weld pool and better control of the fusion zone. The dilution effect is a key issue in the quality of cladded layers and, in this regard, the pulsed current tungsten inert gas (PCTIG) was performed to decrease excess heat input and melting of substrate. This paper deals with the investigation of the hardness and

  3. Rheology of StelliteTM 21 Alloy in Semi-Solid State

    Directory of Open Access Journals (Sweden)

    Sołek K.

    2016-12-01

    Full Text Available The main objective of this study was to conduct an analysis of the rheological properties of StelliteTM 21 alloy in the semi-solid state, as the results could be used for identifying the appropriate temperature range for thixoforming of this alloy, and a secondary objective of the experimental work was the development of mathematical model of the alloy’s apparent viscosity. Such viscosity models are necessary for numerical simulations of the thixoforming processes. The StelliteTM 21 alloy exhibits high hardness and thus shaping in the semi-solid state is promising route of production of parts from this alloy. Within the confines of experimental work the measurement methods of the rheological properties at high temperatures was developed. They are based on the use of specially designed viscometer equipped with high temperature furnace.

  4. Laser surface melting of 10 wt% Mo alloyed hardfacing Stellite 12 plasma transferred arc deposits: Structural evolution and high temperature wear performance

    Science.gov (United States)

    Dilawary, Shaikh Asad Ali; Motallebzadeh, Amir; Afzal, Muhammad; Atar, Erdem; Cimenoglu, Huseyin

    2018-05-01

    Laser surface melting (LSM) process has been applied on the plasma transferred arc (PTA) deposited Stellite 12 and 10 wt% Mo alloyed Stellite 12 in this study. Following the LSM process, structural and mechanical property comparison of the LSM'ed surfaces has been made. Hardness of the LSM'ed surfaces was measured as 549 HV and 623 HV for the Stellite 12 and Stellite 12 + 10 wt% Mo deposits, respectively. Despite their different hardness and structural features, the LSM'ed surfaces exhibited similar tribological performance at room temperature (RT), where fatigue wear mechanism operates. However, the wear at 500 °C promotes tribo-oxide layer formation whose composition depended on the alloying with Mo. Thus, addition of 10 wt% Mo into Stellite 12 PTA deposit has remarkably enhanced the high temperature wear performance of the LSM'ed surface as a result of participation of complex oxide (CoMoO4) in tribo-oxide layer.

  5. Cavitation Erosion of Electro Spark Deposited Nitinol vs. Stellite Alloy on Stainless Steel Substrate

    Science.gov (United States)

    2015-07-15

    lower proportion of carbon. The lower carbon content of SS-316L allows lower carbide precipitation for welding . Online Metals SS-2205 Duplex ...erosion, per ASTM G32. As a comparison, a known erosion-resistant, weld -friendly alloy called Stellite 6® was ESD’d and its cavitation erosion resistance...Microscopy was conducted to examine the metallurgical bond established by the ESD process. As a comparison, a known erosion resistant, weld

  6. Microstructure and wear behavior of stellite 6 cladding on 17-4 PH stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Gholipour, A. [Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Shamanian, M., E-mail: shamanian@cc.iut.ac.ir [Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Ashrafizadeh, F. [Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of)

    2011-04-07

    Research highlights: > The microstructure of the surface layer consisted of carbides embedded in a Co-rich solid solution with dendritic structure. Primary phases formed during the process were identified as Co(FCC) and lamellar eutectic phases (M{sub 23}C{sub 6}, M{sub 6}C, Cr{sub 7}C{sub 3}). > Microhardness profiles showed that hardness increases from interface to the coating surface. This is due to the finer size of the grains at coating surface in comparison to that at interface and also diffusion of Fe adjacent to the interface. > The delamination was suggested as the dominant mechanism of the wear. In this regard, plate-like wear debris consisted of voids and cracks. In addition, due to increase in surface temperature, Cr{sub 2}O{sub 3} oxide phase was formed during wear tests. - Abstract: This paper deals with the investigation of the microstructure and wear behavior of the stellite 6 cladding on precipitation hardening martensitic stainless steel (17-4PH) using gas tungsten arc welding (GTAW) method. 17-4 PH stainless steel is widely used in oil and gas industries. Optical metallography, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were employed to study the microstructure and wear mechanisms. X-ray diffraction analysis was also used to identify phases formed in the coating. The results showed that the microstructure of the surface layer consisted of carbides embedded in a Co-rich solid solution with a dendritic structure. In addition, the dendritic growth in the coating was epitaxial. Primary phases formed during the process were Co (fcc), Co (hcp), lamellar eutectic phases, M{sub 23}C{sub 6} and Cr{sub 7}C{sub 3} type carbides. The results of the wear tests indicated that the delamination was the dominant mechanism. So, it is necessary to apply an inter-layer between the substrate and top coat.

  7. Friction and wear behavior of Colmonoy and Stellite alloys in sodium environment

    International Nuclear Information System (INIS)

    Kanoh, S.; Mizobuchi, S.; Atsumo, H.

    1976-01-01

    A description is given of a series of experiments in sodium environment for the research and development of friction and wear resistant material used for the sliding components of sodium cooled fast breeder reactor. The study relates to the friction and wear characteristics of nickel-base alloy, Colmonoy, and cobalt-base alloy, Stellite, with respect to temperature, load, sliding velocity, sliding mode, and sodium flushing. The friction behavior of these alloys in sodium is compared with that in argon

  8. Critical size of defaults inducing fast fracture of deposit stellite on a valve gate

    International Nuclear Information System (INIS)

    Boneh, B.; Gilles, P.; Champomier, F.; Abisror, A.

    1986-10-01

    The present study has been made to determine if, in the case of a valve gate, transversal cracks are the result of fatigue propagation or the result of fast fracture. The author shows that only a transversal crack, with a size up to 0.7 mm, induces a fast fracture and shows also that, at equal size, a crack located under the stellite is not also injurious than a transversal crack [fr

  9. Estimation of the Thickness and the Material Combination of the Thermal Stress Control Layer (TSCL) for the Stellite21 Hardfaced STD61 Hot Working Tool Steel Using Three-Dimensional Finite Element Analysis

    International Nuclear Information System (INIS)

    Park, Na-Ra; Ahn, Dong-Gyu; Oh, Jin-Woo

    2014-01-01

    The research on a thermal stress control layer (TSCL) begins to undertake to reduce residual stress and strain in the vicinity of the joined region between the hardfacing layer and the base part. The goal of this paper is to estimate the material combination and the thickness of TSCL for the Stellite21 hardfaced STD61 hot working tool steel via three-dimensional finite element analysis (FEA). TSCL is created by the combination of Stellite21 and STD61. The thickness of TSCL ranges from 0.5 mm to 1.5 mm. The influence of the material combination and the thickness of TSCL on temperature, thermal stress and thermal strain distributions of the hardfaced part have been investigated. The results of the investigation have been revealed that a proper material combination of TSCL is Stellite21 of 50 % and STD61 of 50 %, and its appropriate thickness is 1.0 mm

  10. Recubrimiento de Stellite 6 sobre acero inoxidable realizado con láser de CO2 para válvulas de escape de motores diesel

    Directory of Open Access Journals (Sweden)

    Cadenas, M.

    2002-12-01

    Full Text Available To reduce the recovery or the replacement costs of diesel engine exhaust valves, they are manufactured with an economic base material, and a coating which is deposited on the seat valve in order to reach high hardness and good impact, corrosion and high temperature wear resistance (>550 °C and without lubrication. In this work, appropriate laser cladding parameters have been determined to obtain Stellite 6 coatings over AISI 304 steel (as plane test specimens and SAE EV8 steel (as valves substrates. One and two superimposed tracks were deposited on the seat valves, and modifying the laser power as a function of the rotated angle at the beginning and the end of the circular tracks, pores and cracks have been minimized and the thickness of the track were made uniform. Hardness, dilution and final microstructure of the different coatings have been analysed. A 10 % dilution and 550 HV in the tracks over plane test specimens was observed, while valves with one track showed 25 % and 430 HV respectively. With two superimposed tracks the hardness was up to 470 HV in the upper track.

    Para abaratar el coste de recuperación o sustitución de válvulas de escape en motores diesel, estas se fabrican con un material base económico, recubriéndose el asiento de la válvula con otro material al que se exigirá elevada dureza y buena resistencia al impacto, a la corrosión y al desgaste erosivo en caliente (>550 °C y sin lubricación. Partiendo de esta idea, en el presente trabajo se han determinado los parámetros adecuados para realizar, mediante la técnica de plaqueado láser, un recubrimiento con Stellite 6, sobre sustratos de acero AISI 304 (probetas planas y SAE EV8 (válvulas reales. Sobre las válvulas, se depositaron uno y dos cordones superpuestos, se minimizó la presencia de poros y grietas, modificando el grado de solape inicial y final de los cordones circulares y la potencia en función del ángulo girado. Así, se

  11. Improved hardness of laser alloyed X12CrNiMo martensitic stainless steel

    CSIR Research Space (South Africa)

    Adebiyi, DI

    2011-07-01

    Full Text Available The improvement in hardness of X12CrNiMo martensitic stainless steel laser alloyed with 99.9% pure titanium carbide, stellite 6 and two cases of premixed ratio of titanium carbide and stellite 6 [TiC (30 wt.%)- stellite 6 (70 wt.%) and TiC (70 wt...

  12. Optimización del proceso de aporte de recubrimientos anticorrosión de Stellite 6 producidos mediante plaqueado láser

    Directory of Open Access Journals (Sweden)

    Vicario, I.

    2009-02-01

    mediante la técnica de plaqueado láser para producir recubrimientos anti-corrosión empleando aleación de Co Stellite 6 en polvo sobre un substrato de acero C45 (AISI 1045. Posteriormente, se lleva a cabo un estudio de las características frente a la corrosión del recubrimiento final obtenido y de su correlación con los parámetros de aporte empleados.

  13. Metallurgical and mechanical properties of Inconel 600 and stellite; Estudio del comportamiento mecanico-metalurgico de alceacion inconel 600 y estelita

    Energy Technology Data Exchange (ETDEWEB)

    Cstillo, Martin; Villa, Gabriel; Vite, Manuel [Instituto Politecnico Nacional, Mexico D.F. (Mexico); Palacios, Francisco [Instituto Nacional de Investigacion Nuclear (ININ), Estado de Mexico (Mexico); Hernandez, Luis H; Urriolagoita, Guillermo [Instituto Politecnico Nacional, Mexico D.F. (Mexico)

    2005-01-15

    The present work studies the metallurgical and mechanical properties of two alloys, Inconel 600 and stellite, which are within the group of high hardness alloys or superalloys, which are deposited through the electrical weld process to the metallic arc with coated electrode (SMAW) and thereinafter analyzed through electron microscopy, diffractometry and abrasion, Impact and hardness test. The relationship between the microstructure and the final properties of the coating (hardness and abrasion wear resistance) was observed. [Spanish] Este trabajo presenta el estudio sobre las propiedades metalurgicas y mecanicas de dos aleaciones, inconel 600 y estelita, clasificadas dentro del grupo de aleaciones de alta dureza o superaleaciones; las cuales fueron depositadas mediante el proceso de soldadura electrica al arco metalico con electrodo revestido (SMAW) y fueron analizadas mediante microscopia electronica (SEM), difractometria pruebas de abrasion, impacto y dureza. Se observo la relacion entre la microstructura y las propiedades del recubrimiento, como son: dureza, resistencia a la abrasion, resistencia al impacto, ente otras.

  14. Comparative metallurgical study of thick hard coatings without cobalt

    International Nuclear Information System (INIS)

    Clemendot, F.; Van Duysen, J.C.; Champredonde, J.

    1992-07-01

    Wear and corrosion of stellite type hard coatings for valves of the PWR primary system raise important problems of contamination. Substitution of these alloys by cobalt-free hard coatings (Colmonoy 4 and 4.26, Cenium 36) should allow to reduce this contamination. A comparative study (chemical, mechanical, thermal, metallurgical), as well as a corrosion study of these coatings were carried out. The results of this characterization show that none of the studied products has globally characteristics as good as those of grade 6 Stellite currently in service

  15. Tribological study of hard coatings without cobalt intended to isolation components of PWR primary cooling system; Etude tribologique de revetements durs sans cobalt destines aux organes d`isolement du circuit primaire des REP

    Energy Technology Data Exchange (ETDEWEB)

    Cachon, L.

    1995-10-18

    The objective is to qualify coatings without cobalt to replace ``Stellites`` coatings in isolation valves of PWR primary cooling system, as Co is activated when passing in the reactor core and contaminated the cooling loop. Three families of coatings were tested: PVD thin films from 1 to 8 {mu}m monolayers of Cr/C{sub x} with x varying between 1.6 and 9.5 at% or multilayers of pure chromium and Cr/C{sub 1.6} at%, coatings with a thickness between 100 and 200 {mu}m of cermets NiCr{sub y} (y varying from 5 to 35 at%) matrix binding chromium or tungsten carbides, and thick coatings 2 mm thickness of cermets Nitronic 60 or Inconel 625 matrix binding 10, 20 or 30% titanium or niobium carbides. Stellite 6 (2 mm) is the reference coating for tribology. Coatings were qualified and selected by thermal shocks, corrosion and plane friction. The thin film and the thick families were disqualified by their destruction or by their high friction coefficient. Then coatings between 100 and 200 {mu}m were used in a valve mock-up working in PWR primary cooling system pressure and temperature conditions. Tests show that these coatings have better wear or tightness performances than stellite 6, except for a slightly higher friction coefficient. (A.B.).

  16. Residual stress and crack initiation in laser clad composite layer with Co-based alloy and WC + NiCr

    International Nuclear Information System (INIS)

    Lee, Changmin; Park, Hyungkwon; Yoo, Jaehong; Lee, Changhee; Woo, WanChuck; Park, Sunhong

    2015-01-01

    Highlights: • Major problem, clad cracking in laser cladding process, was researched. • Residual stress measurements were performed quantitatively by neutron diffraction method along the surface of specimens. • Relationship between the residual stress and crack initiation was showed clearly. • Ceramic particle effect in the metal matrix was showed from the results of residual stress measurements. • Initiation sites of generating clad cracks were specifically studied in MMC coatings. - Abstract: Although laser cladding process has been widely used to improve the wear and corrosion resistance, there are unwanted cracking issues during and/or after laser cladding. This study investigates the tendency of Co-based WC + NiCr composite layers to cracking during the laser cladding process. Residual stress distributions of the specimen are measured using neutron diffraction and elucidate the correlation between the residual stress and the cracking in three types of cylindrical specimens; (i) no cladding substrate only, (ii) cladding with 100% stellite#6, and (iii) cladding with 55% stellite#6 and 45% technolase40s. The microstructure of the clad layer was composed of Co-based dendrite and brittle eutectic phases at the dendritic boundaries. And WC particles were distributed on the matrix forming intermediate composition region by partial melting of the surface of particles. The overlaid specimen exhibited tensile residual stress, which was accumulated through the beads due to contraction of the coating layer generated by rapid solidification, while the non-clad specimen showed compressive. Also, the specimen overlaid with 55 wt% stellite#6 and 45 wt% technolase40s showed a tensile stress higher than the specimen overlaid with 100% stellite#6 possibly, due to the difference between thermal expansion coefficients of the matrix and WC particles. Such tensile stresses can be potential driving force to provide an easy crack path ways for large brittle fractures

  17. Residual stress and crack initiation in laser clad composite layer with Co-based alloy and WC + NiCr

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Changmin; Park, Hyungkwon; Yoo, Jaehong [Division of Materials Science and Engineering, Hanyang University, Seoul 133-791 (Korea, Republic of); Lee, Changhee, E-mail: chlee@hanyang.ac.kr [Division of Materials Science and Engineering, Hanyang University, Seoul 133-791 (Korea, Republic of); Woo, WanChuck [Neutron Science Division, Korea Atomic Energy Research Institute, Daejeon 305-353 (Korea, Republic of); Park, Sunhong [Research Institute of Industrial Science & Technology, Hyo-ja-dong, Po-Hang, Kyoung-buk, San 32 (Korea, Republic of)

    2015-08-01

    Highlights: • Major problem, clad cracking in laser cladding process, was researched. • Residual stress measurements were performed quantitatively by neutron diffraction method along the surface of specimens. • Relationship between the residual stress and crack initiation was showed clearly. • Ceramic particle effect in the metal matrix was showed from the results of residual stress measurements. • Initiation sites of generating clad cracks were specifically studied in MMC coatings. - Abstract: Although laser cladding process has been widely used to improve the wear and corrosion resistance, there are unwanted cracking issues during and/or after laser cladding. This study investigates the tendency of Co-based WC + NiCr composite layers to cracking during the laser cladding process. Residual stress distributions of the specimen are measured using neutron diffraction and elucidate the correlation between the residual stress and the cracking in three types of cylindrical specimens; (i) no cladding substrate only, (ii) cladding with 100% stellite#6, and (iii) cladding with 55% stellite#6 and 45% technolase40s. The microstructure of the clad layer was composed of Co-based dendrite and brittle eutectic phases at the dendritic boundaries. And WC particles were distributed on the matrix forming intermediate composition region by partial melting of the surface of particles. The overlaid specimen exhibited tensile residual stress, which was accumulated through the beads due to contraction of the coating layer generated by rapid solidification, while the non-clad specimen showed compressive. Also, the specimen overlaid with 55 wt% stellite#6 and 45 wt% technolase40s showed a tensile stress higher than the specimen overlaid with 100% stellite#6 possibly, due to the difference between thermal expansion coefficients of the matrix and WC particles. Such tensile stresses can be potential driving force to provide an easy crack path ways for large brittle fractures

  18. Effect of Heat Treatment on the Microstructure and Properties of HVOF-Sprayed Co-Cr-W Coating

    Czech Academy of Sciences Publication Activity Database

    Houdková, Š.; Smazalová, E.; Pala, Zdeněk

    2016-01-01

    Roč. 25, č. 3 (2016), s. 546-557 ISSN 1059-9630 Institutional support: RVO:61389021 Keywords : ASTM * G-65ASTM * Co-Cr-W * heat treatment * HVOF * Stellite 6 * wear Subject RIV: JK - Corrosion ; Surface Treatment of Materials Impact factor: 1.488, year: 2016

  19. Liquid impact erosion mechanism and theoretical impact stress analysis in TiN-coated steam turbine blade materials

    International Nuclear Information System (INIS)

    Lee, M.K.; Kim, W.W.; Rhee, C.K.; Lee, W.J.

    1999-01-01

    Coating of TiN film was done by reactive magnetron sputter ion plating to improve the liquid impact erosion resistance of steam turbine blade materials, 12Cr steel and Stellite 6B, for nuclear power plant application. TiN-coated blade materials were initially deformed with depressions due to plastic deformation of the ductile substrate. The increase in the curvature in the depressions induced stress concentration with increasing number of impacts, followed by circumferential fracture of the TiN coating due to the circular propagation of cracks. The liquid impact erosion resistance of the blade materials was greatly improved by TiN coating done with the optimum ion plating condition. Damage decreased with increasing TiN coating thickness. According to the theoretical analysis of stresses generated by liquid impact, TiN coating alleviated the impact stress of 12Cr steel and Stellite 6B due to stress attenuation and stress wave reactions such as reflection and transmission at the coating-substrate interface

  20. Liquid Impact Erosion Mechanism and Theoretical Stress Analysis in TiN-Coated Turbine Blade

    International Nuclear Information System (INIS)

    Lee, M. K.; Kim, W. W.; Kim, S. J.; Rhee, C. K.; Kim, Y. S.

    2000-01-01

    Coating of TiN film was done by reactive magnetron sputter ion plating to improve the liquid impact erosion resistance of steam turbine blade materials, 12Cr steel and Stellite 6B, for nuclear power plant application. TiN coated blade materials were initially deformed with depressions due to plastic deformation of the ductile substrate. The increase in the curvature in the depressions induced stress concentration with increasing number of impacts, followed by circumferential fracture of the TiN coating due to the circular propagation of cracks. The liquid impact erosion resistance of the blade materials was greatly improved by TiN coating done with the optimum ion plating condition. Damage decreased with increasing TiN coating thickness. According to the theoretical analysis of stresses generated by liquid impact, TiN coating alleviated the impact stress of 12Cr steel and Stellite 6B due to stress attenuation and stress wave reactions such as reflection and transmission at the coating substrate interface

  1. Deposição por plasma com arco transferido Hardfacing by plasma transfer arc process

    Directory of Open Access Journals (Sweden)

    Víctor Vergara Díaz

    2010-03-01

    Full Text Available Em virtude do Processo de Soldagem Plasma com Alimentação de Pó ter similaridades com o Processo de Soldagem Plasma com Alimentação de Arame, foi realizado um estudo comparativo entre ambos os processos utilizando-se a liga a base de cobalto comercialmente conhecida como Stellite 6, como material de adição na forma de pó e arame. A pesquisa foi realizada com a expectativa de ser aplicada nas operações de revestimentos de superfícies, em especial em pás de turbinas hidráulicas desgastadas por cavitação. A seleção do material de adição a ser empregado depende da natureza do mecanismo de desgaste encontrado. No Labsolda, a liga Stellite 6 vem sendo uma das mais utilizadas, por apresentar uma excelente resistência ao desgaste erosivo por cavitação. Foi avaliada a influência da vazão de gás de plasma a partir dos valores de diluição, dimensões do cordão, dureza e microestrutura. O Processo de Soldagem Plasma com Alimentação de Pó foi o que produziu o melhor acabamento superficial, menor diluição, melhor molhamento e maior largura. Com isto abre-se uma nova perspectiva para revestimentos metálicos e neste contexto se insere a recuperação por soldagem de partes erodidas de turbinas hidráulicas.The Plasma powder transferred arc welding process, which uses feed stock in the powder form, has similarities with Plasma wire transferred arc welding. This work describes a comparative study of the two processes using a Cobalt-based alloy commercially known as Stellite 6. This Co-based alloy is recognized for its superior cavitation erosion resistance. The aim of this work is to investigate the potential of PTA coatings for the protection and refurbishiment hydraulic turbine blades. Coatings were evaluated for the influence of Plasma gas flow rate on coating dilution, geometry, hardness and microstructure. Coatings processed with the atomized Stellite 6 powder feestock showed a superior surface quality, lower dilution

  2. Contribution to the replacement of cobalt-free hardfacing coating by laser cladding in fast neutron reactors

    International Nuclear Information System (INIS)

    De-Tran, Van

    2014-01-01

    This thesis contributes to the replacement of the coating of Stellite 6 which is used in friction areas for the primary circuit of the fast neutron reactor. It contains three parts: 1) A literature review for selecting the materials and the deposition process 2) A parametric study to get healthy deposits (good adhesion with the substrate, little porosity, no cracks, low dilution) 3) A study wear behavior of deposits obtained, at high temperature (200 C) under an atmosphere inert gas, to determine the wear resistance of materials selected without the influence of an eventual oxidation layer. From the literature review, it appears the following choices implemented in our study: * the method laser cladding with advantages such as: - Good adhesion (metallurgical) - High cooling speed - Low dilution rate - Wide parametric range * two nickel-based alloys: Colmonoy-52 and Tribaloy-700. These alloys have good dry wear behavior and could be deposited by the laser. In the manufacturing part of the healthy deposit, firstly, we characterized the metal powder. Then, a parametric study was performed to look for a good parametric range that makes us getting a healthy deposit of Stellite 6 (reference) of Colmonoy-52 and Tribaloy-700. In this case, relationships among three main process parameters laser cladding (laser beam power, surface scanning speed, rate of powder) with the microstructure and chemical composition of the deposit are studied. In study the wear behavior, a pin-on-disc type of tribological was used and tests were carried out in argon at room temperature and 200 C. We investigated the wear mechanism of the best deposition of Stellite 6, Colmonoy-52 and Tribaloy-700. The wear resistance of these materials were thoroughly compared. (author) [fr

  3. Wear Test Results of Candidate Materials for the OK-542 Towed Array Handling Machine Level Winder

    Science.gov (United States)

    1994-12-29

    10 6. Wear Testing Photograph B ....................................................... .11 7. Clad Inconel 625 ...interfere with this wear test. Other materials that were tested included Inconel 625 , Titanium, 304 Stainless, 316 Stainless, and Ni-Al-Br. All of these...Stainless Steel, Inconel 625 , Nickel-Aluminum-Bronze, and Titanium. The specialty materials: Inconel 625 , Monel, Stainless and Stellite, were clad-welded

  4. Modification of the natural radionuclide distribution by some human activities in Canada

    International Nuclear Information System (INIS)

    Knight, G.B.; Makepeace, C.E.

    1980-01-01

    Examples are presented of three types of human activity that have resulted in elevated natural radiation levels. Investigations carried out by a Federal-Provincial Task Force are described. The distributions of grab sample measurements of radon and radon daughter concentrations are compared for the Bancroft area, Cobourg, Deloro, Elliot Lake, and Port Hope in Ontario, and Uranium City in Saskatchewan; it is concluded that the major point of difference between the communities that were investigated and the reference community of Cobourg is the departure from a symmetrical lognormal distribution at the higher concentrations

  5. Optimization of the deposition process of corrosion resistant Stellite 6 coatings produced by laser cladding; Optimizacion del proceso de aporte de recubrimientos anticorrosion de Stellite 6 producidos mediante plaqueado laser

    Energy Technology Data Exchange (ETDEWEB)

    Vicario, I.; Soriano, C.; Sanz, C.; Bayon, R.; Leunda, J.

    2009-07-01

    Laser cladding is one of the most efficient surface treatment technologies in the industry. It uses a laser heat source to deposit a thin layer of a desired material on a moving substrate, whose properties have to be improved, achieving a metallurgical bonding between them with low heat affected zone and low dilution, compared to other conventional technologies such as PTA, TIG welding or thermal Spraying. In this sense, it is remarkable that there are 3 main application fields for laser cladding technology: restoration of refurbishment of damaged parts, surface coating against corrosion or wear, and rapid proto typing. the present work described a study of the optimization of the laser cladding of Co based coatings (Diamalloy 4060NS) on medium carbon steel C45 (AISI 1945). After laser treatment, the surface of the substrate materials is improved in terms of resistance against corrosion; this confirmed in the analysis performed afterwards. it is also shown that the corrosion barrier properties have direct correlation with the laser cladding variables. (Author) 10 refs.

  6. Laser stereolithography by multilayer cladding of metal powders

    Science.gov (United States)

    Jendrzejewski, Rafal; Rabczuk, Grazyna T.; Zaremba, R.; Sliwinski, Gerard

    1998-07-01

    3D-structures obtained by means of laser cladding of the metal alloy powders: bronze B10 and stellite 6 and the process parameters are studied experimentally. The structures are made trace-on-trace by remelting of the metal powder injected into the focusing region of the 1.2 kW CO2 laser beam. For the powder and sample feeding rates of 8-22 g/min and 0.4-1.2 m/min, respectively, and the applied beam intensities not exceeding 2 X 105 W cm-2 the process is stable and regular traces connected via fusion zones are produced for each material. The thickness of these zones does not exceed several per cent of the layer height. The process results in the efficient formation of multilayer structures. From their geometry the effect of energy coupling and interaction parameters are deduced. Moreover, the microanalysis by means of SEM- and optical photographs of samples produced under different experimental conditions confirms the expected mechanical properties, low porosity and highly homogenous structure of the multilayers. In addition to the known material stellite 6 the bronze B10 is originally proposed for a rapid prototyping.

  7. RA Reactor operation and maintenance (I-IX), part VIII, Task 3.08/05, Decontamination of the reactor

    International Nuclear Information System (INIS)

    Zecevic, V.

    1963-12-01

    Permanent increase of radiation in the heavy water system was noticed during first three year of the RA reactor operation, even when the reactor was shutdown. It was found that there was no failure of the fuel element cladding. Radioactive cobalt was found in the heavy water which was rather strange. During repair of the heavy water system, it has been found that stellite was used for coating the heavy water pumps. Since stellite is a cobalt alloy, this could have been the source of radioactive cobalt in the heavy water. The stellite coating was damaged due to friction and particle of cobalt appeared in the coolant, they were activated since they were in the core. decontamination of the heavy water and the heavy water coolant loop was a must . Beside the detailed report on the contamination and decontamination of the heavy water system this volume includes 14 annexes describing the investigation of the event and the whole procedure of decontamination

  8. RA Reactor operation and maintenance (I-IX), part VIII, Task 3.08/05, Decontamination of the reactor; Pogon i odrzavanje reaktora (I-IX), VIII Deo, Zadatak 3.08/05 Dekontaminacija reaktora

    Energy Technology Data Exchange (ETDEWEB)

    Zecevic, V [Institute of Nuclear Sciences Boris Kidric, Reaktor RA, Vinca, Beograd (Serbia and Montenegro)

    1963-12-15

    Permanent increase of radiation in the heavy water system was noticed during first three year of the RA reactor operation, even when the reactor was shutdown. It was found that there was no failure of the fuel element cladding. Radioactive cobalt was found in the heavy water which was rather strange. During repair of the heavy water system, it has been found that stellite was used for coating the heavy water pumps. Since stellite is a cobalt alloy, this could have been the source of radioactive cobalt in the heavy water. The stellite coating was damaged due to friction and particle of cobalt appeared in the coolant, they were activated since they were in the core. decontamination of the heavy water and the heavy water coolant loop was a must . Beside the detailed report on the contamination and decontamination of the heavy water system this volume includes 14 annexes describing the investigation of the event and the whole procedure of decontamination.

  9. Effect of tungsten-187 in primary coolant on dose rate build-up in Vandellos 2

    International Nuclear Information System (INIS)

    Fernandez Lillo, E.; Llovet, R.; Boronat, M.

    1994-01-01

    The present work proposes a relationship between the Cobalt-60 piping deposited activity and the relatively high levels of Tungsten-187 in the coolant of Vandellos 2. The conclusions of this work can be applicable to other plants, since it proposes a tool to estimate and quantify the contribution of stellite to the generation of Cobalt-60 and the radiation dose build-up. (authors). 7 figs., 6 refs

  10. Reactive Fabrication and Effect of NbC on Microstructure and Tribological Properties of CrS Co-Based Self-Lubricating Coatings by Laser Cladding

    Directory of Open Access Journals (Sweden)

    Liuyang Fang

    2017-12-01

    Full Text Available The CrS/NbC Co-based self-lubricating composite coatings were successfully fabricated on Cr12MoV steel surface by laser clad Stellite 6, WS2, and NbC mixed powders. The phase composition, microstructure, and tribological properties of the coatings ware investigated by means of X-ray diffraction (XRD, scanning electron microscopy (SEM, and energy dispersive spectrometer (EDS, as well as dry sliding wear testing. Based on the experimental results, it was found reactions between WS2 and Co-based alloy powder had occurred, which generated solid-lubricant phase CrS, and NbC play a key role in improving CrS nuclear and refining microstructure of Co-based composite coating during laser cladding processing. The coatings were mainly composed of γ-Co, CrS, NbC, Cr23C6, and CoCx. Due to the distribution of the relatively hard phase of NbC and the solid lubricating phase CrS, the coatings had better wear resistance. Moreover, the suitable balance of CrS and NbC was favorable for further decreasing the friction and improving the stability of the contact surfaces between the WC ball and the coatings. The microhardness, friction coefficient, and wear rate of the coating 4 (Clad powders composed of 60 wt % Stellite 6, 30 wt % NbC and 10 wt % WS2 were 587.3 HV0.5, 0.426, and 5.61 × 10−5 mm3/N·m, respectively.

  11. Decay heat and activity of the structural materials of the fuel and blanket assemblies of the second and third core of KNK II

    International Nuclear Information System (INIS)

    Winterhagen, D.

    1986-06-01

    The decay heat and activity caused by structural materials have been calculated for the fuel assemblies of KNK II (second and third core) with a residence time of 720 equivalent full-power days (efpd) and the blanket assemblies with 1880 efpd. The values are given for the different zones of the assemblies (head, active zone, fission gas plenum, foot and stellite area) for decay times from 1 to 20 years. For decay times beyond 2 years more than 80 % of the decay heat are caused by the Co60-decay, more than 60 % of which result from the stellite in the foot area [de

  12. Friction and wear of ball bearings in liquid sodium environment. Pt. 1

    International Nuclear Information System (INIS)

    Kleefeldt, K.; Gering, G.

    1975-07-01

    This report describes sodium experiments with ball bearings, fabricated out of five different materials, i.e. tool steel (s-6-5-2), stainless high speed steel (BG 42), stellite, ferro-titanit (WF 13.5) and tungsten carbide/cobalt cermet (GT 10/20). With each material four cageless bearings of the type 6207 were tested in task 1 under the following test conditions, in order to determine the most promising material for further investigations: test temperature 400 0 C, axial load 300 kp, speed 200 min -1 , total revolutions 0.2 x 10 6 , oxygen concentration [de

  13. Reactive Fabrication and Effect of NbC on Microstructure and Tribological Properties of CrS Co-Based Self-Lubricating Coatings by Laser Cladding.

    Science.gov (United States)

    Fang, Liuyang; Yan, Hua; Yao, Yansong; Zhang, Peilei; Gao, Qiushi; Qin, Yang

    2017-12-28

    The CrS/NbC Co-based self-lubricating composite coatings were successfully fabricated on Cr12MoV steel surface by laser clad Stellite 6, WS₂, and NbC mixed powders. The phase composition, microstructure, and tribological properties of the coatings ware investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectrometer (EDS), as well as dry sliding wear testing. Based on the experimental results, it was found reactions between WS₂ and Co-based alloy powder had occurred, which generated solid-lubricant phase CrS, and NbC play a key role in improving CrS nuclear and refining microstructure of Co-based composite coating during laser cladding processing. The coatings were mainly composed of γ-Co, CrS, NbC, Cr 23 C₆, and CoC x . Due to the distribution of the relatively hard phase of NbC and the solid lubricating phase CrS, the coatings had better wear resistance. Moreover, the suitable balance of CrS and NbC was favorable for further decreasing the friction and improving the stability of the contact surfaces between the WC ball and the coatings. The microhardness, friction coefficient, and wear rate of the coating 4 (Clad powders composed of 60 wt % Stellite 6, 30 wt % NbC and 10 wt % WS₂) were 587.3 HV 0.5 , 0.426, and 5.61 × 10 -5 mm³/N·m, respectively.

  14. Replacement of Co-base alloy for radiation exposure reduction in the primary system of PWR

    International Nuclear Information System (INIS)

    Han, Jeong Ho; Nyo, Kye Ho; Lee, Deok Hyun; Lim, Deok Jae; Ahn, Jin Keun; Kim, Sun Jin

    1996-01-01

    Of numerous Co-free alloys developed to replace Co-base stellite used in valve hardfacing material, two iron-base alloys of Armacor M and Tristelle 5183 and one nickel-base alloy of Nucalloy 488 were selected as candidate Co-free alloys, and Stellite 6 was also selected as a standard hardfacing material. These four alloys were welded on 316SS substrate using TIG welding method. The first corrosion test loop of KAERI simulating the water chemistry and operation condition of the primary system of PWR was designed and fabricated. Corrosion behaviors of the above four kinds of alloys were evaluated using this test loop under the condition of 300 deg C, 1500 psi. Microstructures of weldment of these alloys were observed to identify both matrix and secondary phase in each weldment. Hardnesses of weld deposit layer including HAZ and substrate were measured using micro-Vickers hardness tester. The status on the technology of Co-base alloy replacement in valve components was reviewed with respect to the classification of valves to be replaced, the development of Co-free alloys, the application of Co-free alloys and its experiences in foreign NPPs, and the Co reduction program in domestic NPPs and industries. 18 tabs., 20 figs., 22 refs. (Author)

  15. Prevention of crack initiation in valve bodies under thermal shock

    Energy Technology Data Exchange (ETDEWEB)

    Delmas, J.; Coppolani, P.

    1996-12-01

    On site and testing experience has shown that cracking in valves affects mainly the stellite hardfacing on seats and discs but may also be a concern for valve bodies. Metallurgical investigations conducted by EDF laboratories on many damaged valves have shown that most of the damage had either a chemical, manufacturing, or operating origin with a strong correlation between the origins and the type of damage. The chemical defects were either excess ferritic dilution of stellite or excess carburizing. Excess carburizing leads to a too brittle hardfacing which cracks under excessive stresses induced on the seating surfaces, via the stem, by too high operating thrusts. The same conditions can also induce cracks of the seats in the presence, in the hardfacing, of hidden defects generated during the welding process. Reduction of the number of defects results first from controls during manufacturing, mainly in the thickness of stellite. On the other hand, maintenance must be fitted to the type of defect. In-situ lapping may lead to release of cobalt, resulting in contamination of the circuit. Furthermore, it is ineffectual in the case of a crack through the seating surface, as is often found on globe valves. The use of new technologies of valves with removable seats and cobalt-free alloys solves permanently this kind of problem.

  16. Aspects of a Co-free hardfacing Materials Development to Reduce the Radioactivity in NPPs

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Joung Soo; Kim, Hong Pyo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Suh, Jeong Hun [Inss Tek Co., Daejeon (Korea, Republic of)

    2007-07-01

    For the last one or two decades, active researches to develop Co-free hardfacing materials in order to replace Co-base stellite alloys have been done to reduce the radioactivity in the primary systems in nuclear power plants(NPPs). However, Co-free materials having superior mechanical properties to stellite alloys have not been developed up to now. There are two ways to increase the performance characteristics of the key parts needed to be coated with hardfacing materials, thus resulting in replacing the Co-base stellite alloys with superior mechanical properties; one of them is to develop new Co-free materials with a better quality in performance than that of satellite alloys. The other is to use new coating techniques developed to increase the coated surface properties of already developed Co-free materials. In this study, the aspect of newly developed Co-free materials is reviewed and the necessity of the development of new Co-free materials is emphasized for the replacement of Co-base satellite alloys. In addition, a new coating technique, which is called a laser hardfacing(cladding) technique(LHT), is introduced and its advantage and applicability to the key parts in NPPs are discussed using our experimental results to improve the properties of a surface coated with existing Co-free hardfacing materials. The coating technique using a laser beam having a high energy density has unique advantages to obtain various microstructures such as crystalline, amorphous, porous, and nano structures and also to get coating layers having high a hardness to result in an excellent resistance to erosion corrosion and wear.

  17. Surface engineering with lasers : an application to Co-base materials

    NARCIS (Netherlands)

    de Hosson, J.T.M.; de Mol van Otterloo, J.L.; Boerstoel, B.M.; Huis in 't Veld, A.J.; Sarton, LAJ; Zeedijk, HB

    1997-01-01

    The present paper concentrates on the applications of CO2 laser treatments to enhance fretting wear properties of stainless steel. Stainless steel 316 is used as substrate material. Powder particles of the various stellites with sizes ranging between 45 and 125 mu m are fed onto the surface. It was

  18. Relationship of microstructure to fracture topography in orthopedic alloys

    International Nuclear Information System (INIS)

    Gilbertson, L.N.

    1976-01-01

    Two major alloys used for orthopedic implants are 316L stainless steel and a cast cobalt--chromium--molybdenum alloy similar to Haynes Stellite 21. Another alloy that is just being introduced is Ti--6Al--4V. All three of these alloys are used in different conditions with different microstructures. Standard specimens with typical microstructures encountered in orthopedic applications were loaded to fracture in both overload and fatigue modes. Different rates of loading were also used in some cases. The fracture surfaces of these standard samples were analyzed in the Scanning Electron Microscope. An attempt was made to relate the fracture behavior, as evidenced by the fracture typography, to the microstructure of the alloy as revealed by metallography

  19. Étude de défaut trouvé dans des tubes centrifugés de stellite 6B

    OpenAIRE

    Villar Echeverría, Alejandro

    2014-01-01

    Les superalliages sont des alliages employés pour travailler à hautes températures tout en maintenant stabilité dimensionnelle et résistance mécanique et à la corrosion. Ils sont utilisés dans les domaines de l'aéronautique, l’industrie navale et médicale entre autres. Parmi les différents types de superalliages existants (base nickel, base cobalt et base nickel-fer), on travaillera dans cette étude avec des superalliages base cobalt. Ces alliages sont connus communément sous le nom de Stelli...

  20. APPLICATION OF QC TOOLS FOR CONTINUOUS IMPROVEMENT IN AN EXPENSIVE SEAT HARDFACING PROCESS USING TIG WELDING

    Directory of Open Access Journals (Sweden)

    Mohammed Yunus

    2016-09-01

    Full Text Available The present study is carried out to improve quality level by identifying the prime reasons of the quality related problems in the seat hardfacing process involving the deposition of cobalt based super alloy in I.C. Engine valves using TIG welding process. During the Process, defects like stellite deposition overflow, head melt, non-uniform stellite merging, etc., are observed and combining all these defects, the rejection level was in top position in Forge shop. We use widely referred QC tools of the manufacturing field to monitor the complete operation and continuous progressive process improvement to ensure ability and efficiency of quality management system of any firm. The work aims to identify the various causes for the rejection by the detailed study of the operation, equipment, materials and the various process parameters that are very important to get defects-free products. Also, to evolve suitable countermeasures for reducing the rejection percentage using seven QC tools. To further understand and validate the obtained results, we need to address other studies related to motivations, advantages, and disadvantages of applying quality control tools.

  1. Chromium Elimination and Cannon Life Extension for Gun Tubes

    Science.gov (United States)

    2012-08-30

    the use of hexavalent chromium (VI) in the production of cannon barrels by developing a cost effective environmentally friendly Explosive Bonding...erosion- resistant chrome cobalt alloy matrix with 15% tungsten. Stellite is used as M60 machine gun barrel liner. Tantalum Cobalt Tungsten...Grounds (YPG) Preliminary proof of principle endurance testing at YPG shows promising results when conducted side by side to a chrome plated

  2. Cost Estimate for Gun Liner Emplacement

    Science.gov (United States)

    2011-08-01

    excellent material to resist wear and erosion in gun tubes, it is applied by an electrolytic process that involves hexavalent chromium, a known carcinogen...A recent Department of Defense memorandum has strongly urged that, wherever possible, processes involving hexavalent chromium be eliminated from...might be affordable.) Other refractory metals, such as the Stellite series, BioDur CCM* (a cobalt, chrome , molybdenum alloy), or niobium are less

  3. Report on measurements at the pump Avala - Annex 7

    International Nuclear Information System (INIS)

    Nikolic, M.

    1963-01-01

    Visual inspection and measuring results have shown that the surface of the upper pump bearing is much more worn-out than the lower radial bearing. This has proved that most of the cobalt (contained in the stellite alloy) came from the upper pump bearings. It could be stated that about 60 grams of cobalt from the upper pump bearings could come into the coolant system [sr

  4. Hard alloys testing-machine for values of PWR primary coolant circuits

    International Nuclear Information System (INIS)

    Campan, J.L.; Sauze, A.

    1980-01-01

    Testing of valve parts or material used in valve fabrication and particularly seizing conditions in friction of plane surfaces coated with hard alloys of the type stellite. The testing equipment called Marguerite is composed of a hot pressurized water loop in conditions similar to PWR primary coolant circuits (320 0 C, 150 bars) and a testing-machine with measuring instruments. Testing conditions and samples are described [fr

  5. ALARA efforts in nordic BWRs

    Energy Technology Data Exchange (ETDEWEB)

    Ingemansson, T.; Lundgren, K.; Elkert, J. [ABB Atom, Vaesteraes (Sweden)

    1995-03-01

    Some ALARA-related ABB Atom projects are currently under investigation. One of the projects has been ordered by the Swedish Radiation Protection Institute, and two others by the Nordic BWR utilities. The ultimate objective of the projects is to identify and develop methods to significantly decrease the future exposure levels in the Nordic BWRS. As 85% to 90% of the gamma radiation field in the Nordic BWRs originates from Co-60, the only way to significantly decrease the radiation doses is to effect Co and Co-60. The strategy to do this is to map the Co sources and estimate the source strength of Co from these sources, and to study the possibility to affect the release of Co-60 from the core surfaces and the uptake on system surfaces. Preliminary results indicate that corrosion/erosion of a relatively small number of Stellite-coated valves and/or dust from grinding of Stellite valves may significantly contribute to the Co input to the reactors. This can be seen from a high measured Co/Ni ratio in the feedwater and in the reactor water. If stainless steel is the only source of Co, the Co/Ni ratio would be less than 0.02 as the Co content in the steel is less than 0.2%. The Co/Ni ratio in the reactor water, however, is higher than 0.1, indicating that the major fraction of the Co originates from Stellite-coated valves. There are also other possible explanations for an increase of the radiation fields. The Co-60 inventory on the core surfaces increases approximately as the square of the burn-up level. If the burn-up is increased from 35 to 5 MWd/kgU, the Co-60 inventory on the core surfaces will be doubled. Also the effect on the behavior of Co-60 of different water chemistry and materials conditions is being investigated. Examples of areas studied are Fe and Zn injection, pH-control, and different forms of surface pre-treatments.

  6. Analysis of structure-tectonic pattern within the 'Degelen' massif conformably to conditions of radionuclide migration in ground water

    International Nuclear Information System (INIS)

    Gorbunova, Eh.M.; Ivanchenko, G.N.; Godunova, L.D.

    2005-01-01

    Major orientation of radiation monitoring on the Semipalatinsk test site lies in direction of common regularities for formation and distribution of radioactive contamination. Zones, within the 'Degelen' technical area. of hydrogeological active faults are patly subjected to impact of underground explosions. Data of computer-aided decryption of a stellite image by means of program package LESSA allow specification of para-genesis structures standing as probabilistic pathways of radionuclide migration. (author)

  7. Modeling the Influence of Process Parameters and Additional Heat Sources on Residual Stresses in Laser Cladding

    Science.gov (United States)

    Brückner, F.; Lepski, D.; Beyer, E.

    2007-09-01

    In laser cladding thermal contraction of the initially liquid coating during cooling causes residual stresses and possibly cracks. Preweld or postweld heating using inductors can reduce the thermal strain difference between coating and substrate and thus reduce the resulting stress. The aim of this work is to better understand the influence of various thermometallurgical and mechanical phenomena on stress evolution and to optimize the induction-assisted laser cladding process to get crack-free coatings of hard materials at high feed rates. First, an analytical one-dimensional model is used to visualize the most important features of stress evolution for a Stellite coating on a steel substrate. For more accurate studies, laser cladding is simulated including the powder-beam interaction, the powder catchment by the melt pool, and the self-consistent calculation of temperature field and bead shape. A three-dimensional finite element model and the required equivalent heat sources are derived from the results and used for the transient thermomechanical analysis, taking into account phase transformations and the elastic-plastic material behavior with strain hardening. Results are presented for the influence of process parameters such as feed rate, heat input, and inductor size on the residual stresses at a single bead of Stellite coatings on steel.

  8. Cladding using a 15 kW CO2 laser

    International Nuclear Information System (INIS)

    Vesely, E.J.; Verma, S.K.

    1989-01-01

    Laser alloying or cladding differs little in principle from the traditional forms of weld overlays, but lasers as a heat source offer some distinct advantages. With the selective heating attainable using high power lasers, good metallurgical bond of the clad layer, minimal dilution and typically, a very fine homogeneous microstructure can be obtained in the clad layer. This is a review of work in laser cladding using the 15 kW CO 2 laser. The authors discuss the ability of the laser clad surface to increase the high temperature oxidation resistance of a low-alloy carbon steel (4140). Examples of clads subjected to high- temperature thermal cycling of nickel-20% aluminum and TaC + 4140 clad low-alloy steel and straight high-temperature oxidation of Stellite 6-304L cladding on a 4140 substrate are given

  9. Hard hardfacing by welding in the manufacture of valves; Problem Cobalt, alternatives, advantages, disadvantages

    International Nuclear Information System (INIS)

    Piquer Caballero, J.

    2014-01-01

    Alloys of recharge usually used in the field of the valves are base alloys cobalt (stellite), but in the field of nuclear power plants, due to radioactive activation of the cobalt, there is a growing trend to replace these alloys with other calls cobalt free . In this paper we will explore the most frequent and will be deducted the relevant advantages and disadvantages of these, in comparison with base alloys cobalt. (Author)

  10. Hard hardfacing by welding in the manufacture of valves; Problem Cobalt, alternatives, advantages, disadvantages; Recargues Duros por Soldadura en la Fabricacion de Valvulas ; el Problema del Cobalto, alternativas, ventajas, inconvenientes

    Energy Technology Data Exchange (ETDEWEB)

    Piquer Caballero, J.

    2014-07-01

    Alloys of recharge usually used in the field of the valves are base alloys cobalt (stellite), but in the field of nuclear power plants, due to radioactive activation of the cobalt, there is a growing trend to replace these alloys with other calls cobalt free . In this paper we will explore the most frequent and will be deducted the relevant advantages and disadvantages of these, in comparison with base alloys cobalt. (Author)

  11. Electrospark deposition for die repair

    Directory of Open Access Journals (Sweden)

    J. Tušek

    2012-01-01

    Full Text Available The electrospark deposition is a process for surfacing of hard metal alloys, e.g. carbides and stellites, on the surfaces of new or old machine elements. In this process, a high current is conducted through an oscillating electrode and a substrate for a very short period of time. In the paper, the process is described and the thickness of deposited layer, chemical composition, dilution rate and the layer roughness are determined.

  12. Application of Moessbauer spectroscopy to study corrosion

    International Nuclear Information System (INIS)

    Ramshesh, V.; Ravichandran, K.; Venkateswarlu, K.S.

    1976-01-01

    The system components in a nuclear power station include steel, stainless steel and various alloys such as Monel, Inconel, Stellite etc. Usually water/heavy water used as the coolant flows at high temperatures and pressures. Under such conditions the interaction of system components with the coolant produces a host of corrosion products. The deposition of such products is essential. This report attempts to review the salient features of identification of such corrosion products using Moessbauer spectroscopy. (author)

  13. Absorptivity Measurements and Heat Source Modeling to Simulate Laser Cladding

    Science.gov (United States)

    Wirth, Florian; Eisenbarth, Daniel; Wegener, Konrad

    The laser cladding process gains importance, as it does not only allow the application of surface coatings, but also additive manufacturing of three-dimensional parts. In both cases, process simulation can contribute to process optimization. Heat source modeling is one of the main issues for an accurate model and simulation of the laser cladding process. While the laser beam intensity distribution is readily known, the other two main effects on the process' heat input are non-trivial. Namely the measurement of the absorptivity of the applied materials as well as the powder attenuation. Therefore, calorimetry measurements were carried out. The measurement method and the measurement results for laser cladding of Stellite 6 on structural steel S 235 and for the processing of Inconel 625 are presented both using a CO2 laser as well as a high power diode laser (HPDL). Additionally, a heat source model is deduced.

  14. Test methods for selection of materials of construction for high-level radioactive waste vitrification. Revision

    International Nuclear Information System (INIS)

    Bickford, D.F.; Corbett, R.A.; Morrison, W.S.

    1986-01-01

    Candidate materials of construction were evaluated for a facility at the Department of Energy's Savannah River Plant to vitrify high-level radioactive waste. Limited operating experience was available under the corrosive conditions of the complex vitrification process. The objective of the testing program was to provide a high degree of assurance that equipment will meet or exceed design lifetimes. To meet this objective in reasonable time and minimum cost, a program was designed consisting of a combination of coupon immersion and electrochemical laboratory tests and pilot-scale tests. Stainless steels and nickel-based alloys were tested. Alloys that were most resistant to general and local attack contained nickel, molybdenum (>9%), and chromium (where Cr + Mo > 30%). Alloy C-276 was selected as the reference material for process equipment. Stellite 6 was selected for abrasive service in the presence of formic acid. Alloy 690 and ALLCORR were selected for specific applications

  15. Physical properties and microstructure performance of ultrafine nanocrystals reinforced laser 3D print microlaminates

    International Nuclear Information System (INIS)

    Li, Jianing; Xia, Chunzhi; Liu, Peng; Pan, Guanghui; Wang, Congwei

    2015-01-01

    Highlights: • Ultrafine nanocrystals, nanorods and amorphous phases were produced in such LRP microlaminates. • The amorphous/nanocrystalline interface owned a high bonding energy. • Amorphous/nanocrystalline interface may retard growth of nanocrystals in a certain extent. • Due to production of amorphous, lots of microscale ASNPs were produced. • Ultrafine nanocrystals had the high interface energy, which became the driving force of the atomic motions. - Abstract: Rapid prototyping based on laser alloying was used to produce ultrafine nanocrystals (UN) reinforced three-dimensional microlaminates. Such microlaminates were fabricated on a TA1 alloy by laser rapid prototyping (LRP) of Stellite 20–TiN–B 4 C mixed powders to produce a bottom layer; then Stellite 20–TiN–B 4 C–Sb powders were deposited on such bottom-layer in order to form an upper-layer. There is an excellent metallurgical combination between such two layer; the upper-layer shows a better wear resistance than that of the bottom layer. The Sb addition promoted lots of UN to be produced, and lots of the nanorods were also produced in such microlaminates, their growth was retarded by agglomeration of UN in a certain extent. Such UN had the high interface energy, which became the driving force of atomic motions, favoring formation of a compact fine structure

  16. Physical properties and microstructure performance of ultrafine nanocrystals reinforced laser 3D print microlaminates

    Energy Technology Data Exchange (ETDEWEB)

    Li, Jianing, E-mail: jn2369@163.com [School of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 (China); Beijing Aeronautical Manufacturing Technology Research Institute, Beijing 100024 (China); Xia, Chunzhi [Provincial Laboratory of Advanced Welding Technology, Jiangsu University of Science and Technology, Zhenjiang 212003 (China); Liu, Peng; Pan, Guanghui; Wang, Congwei [School of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101 (China)

    2015-10-05

    Highlights: • Ultrafine nanocrystals, nanorods and amorphous phases were produced in such LRP microlaminates. • The amorphous/nanocrystalline interface owned a high bonding energy. • Amorphous/nanocrystalline interface may retard growth of nanocrystals in a certain extent. • Due to production of amorphous, lots of microscale ASNPs were produced. • Ultrafine nanocrystals had the high interface energy, which became the driving force of the atomic motions. - Abstract: Rapid prototyping based on laser alloying was used to produce ultrafine nanocrystals (UN) reinforced three-dimensional microlaminates. Such microlaminates were fabricated on a TA1 alloy by laser rapid prototyping (LRP) of Stellite 20–TiN–B{sub 4}C mixed powders to produce a bottom layer; then Stellite 20–TiN–B{sub 4}C–Sb powders were deposited on such bottom-layer in order to form an upper-layer. There is an excellent metallurgical combination between such two layer; the upper-layer shows a better wear resistance than that of the bottom layer. The Sb addition promoted lots of UN to be produced, and lots of the nanorods were also produced in such microlaminates, their growth was retarded by agglomeration of UN in a certain extent. Such UN had the high interface energy, which became the driving force of atomic motions, favoring formation of a compact fine structure.

  17. Effect of heat treatment on the microstructure of Co-Cr-W alloy fabricated by laser additive manufacturing

    Science.gov (United States)

    Ren, Bo; Chen, Changjun; Zhang, Min

    2018-04-01

    Stellite 6 cobalt-based alloy powder was used to produce Co-Cr-W alloy using laser additive manufacturing technology, and then different heat treatment strategies were carried out on the deposited sample. The characteristics of microstructure under different heat treatment conditions were investigated using scanning electron microscopy with energy dispersive spectroscopy, transmission electron microscope, and x-ray diffraction. The results show that the as-deposited sample has few cracks or pores, and the microstructure is typical dendritic structure, and lamellar eutectic carbides are rich in Cr in interdendritic. The matrix mainly consists of γ phases and a few ɛ phases. Some γ phases transform into ɛ phases after 900°C/6 h aging treatment and lamellar eutectic carbides transform into blocky carbides presenting as a network, most of the carbides are rich in Cr and a few are rich in W. When heat treated at 1200°C/1 h followed by water cooling and then treated at 900°C/6 h followed by furnace cooling, it can be found that some γ phases transform into ɛ phases. The carbides transform into elliptical M23C6 carbides that are rich in Cr with the size of 1 to 3 μm and a part of W-rich carbides.

  18. Stem thrust prediction model for W-K-M double wedge parallel expanding gate valves

    Energy Technology Data Exchange (ETDEWEB)

    Eldiwany, B.; Alvarez, P.D. [Kalsi Engineering Inc., Sugar Land, TX (United States); Wolfe, K. [Electric Power Research Institute, Palo Alto, CA (United States)

    1996-12-01

    An analytical model for determining the required valve stem thrust during opening and closing strokes of W-K-M parallel expanding gate valves was developed as part of the EPRI Motor-Operated Valve Performance Prediction Methodology (EPRI MOV PPM) Program. The model was validated against measured stem thrust data obtained from in-situ testing of three W-K-M valves. Model predictions show favorable, bounding agreement with the measured data for valves with Stellite 6 hardfacing on the disks and seat rings for water flow in the preferred flow direction (gate downstream). The maximum required thrust to open and to close the valve (excluding wedging and unwedging forces) occurs at a slightly open position and not at the fully closed position. In the nonpreferred flow direction, the model shows that premature wedging can occur during {Delta}P closure strokes even when the coefficients of friction at different sliding surfaces are within the typical range. This paper summarizes the model description and comparison against test data.

  19. Stem thrust prediction model for W-K-M double wedge parallel expanding gate valves

    International Nuclear Information System (INIS)

    Eldiwany, B.; Alvarez, P.D.; Wolfe, K.

    1996-01-01

    An analytical model for determining the required valve stem thrust during opening and closing strokes of W-K-M parallel expanding gate valves was developed as part of the EPRI Motor-Operated Valve Performance Prediction Methodology (EPRI MOV PPM) Program. The model was validated against measured stem thrust data obtained from in-situ testing of three W-K-M valves. Model predictions show favorable, bounding agreement with the measured data for valves with Stellite 6 hardfacing on the disks and seat rings for water flow in the preferred flow direction (gate downstream). The maximum required thrust to open and to close the valve (excluding wedging and unwedging forces) occurs at a slightly open position and not at the fully closed position. In the nonpreferred flow direction, the model shows that premature wedging can occur during ΔP closure strokes even when the coefficients of friction at different sliding surfaces are within the typical range. This paper summarizes the model description and comparison against test data

  20. High power CO2 lasers and their applications in nuclear industry

    International Nuclear Information System (INIS)

    Nath, A.K.

    2002-01-01

    Carbon dioxide laser is one of the most popular lasers in industry for material processing applications. It has very high power capability and high efficiency, can be operated in continuous wave (CW), modulated and pulsed modes, and has relatively low cost. Due to these characteristics high power CO 2 lasers are being used worldwide in different industries for a wide variety of materials processing operations. In nuclear industry, CO 2 laser has made its way in many applications. Some of the tasks performed by multikilowatt CO 2 laser are cutting operations necessary to remove unprocessible hardware from reactor fuel assemblies, sealing/fixing/removing radioactive contaminations onto/from concrete surfaces and surface modification of engineering components for improved surface mechanical and metallurgical characteristics. We have developed various models of CW CO 2 lasers of power up to 12 kW and a high repetitive rate TEA (Transversely Excited Atmospheric pressure) CO 2 laser of 500 W average power operating at 500 Hz repetition rates. We have carried many materials processing applications of direct relevance to DAE. Recent work includes laser welding of end plug PFBR fuel tubes, martensitic stainless steel and titanium alloy, surface cladding of turbine blades made of Ni-super alloy with stellite 694, fabrication on graded material of stainless steel and stellite, and laser scabbling, drilling and cutting of concrete which have potential application in decontamination and decommissioning of nuclear facilities. A brief overview of these indigenous developments will be presented. (author)

  1. Modelling of residual stresses in valves Norem hard-facing alloys: a material characterization issue

    International Nuclear Information System (INIS)

    Mathieu, J.P.; Arnoldi, F.; Gauthier, E.; Beaurin, G.

    2011-01-01

    Replacement of cobalt-based hard-facing alloys (Stellite) is of high interest within the topic of reduction of human radiation exposure during field-work. Iron-based hard-facing alloys, such as Norem, are considered as good replacement candidates. Their wear characteristics are known to be quite equivalent to Stellite but are counter-balanced by lack of feedback in the field, especially about their resistance/toughness to brutal thermal shocks (60 C - 280 C for primary water). Norem alloys show a solid-solution strengthened austenitic dendrites matrix with a continuous network of eutectic and non-eutectic carbides at the grain boundaries. Toughness evaluation also requires information about residual stresses due to the welding (deposition) process: this work aims at furnishing tools for this purpose. First part of the work involved a microstructural study in order to compare the as-received material to other Norem samples previously observed in EDF's works and literature. A characterization of the different phase evolutions after heating and fast cooling of Norem is then made, in order to characterize whether metallurgical aspects have to be considered in the mechanical part during welding modelling: it appears that no strong solid-solid phase transformation may occur in welding situation. Tensile characterization is then performed on bulk PTAW (Plasma Transferred Arc Welding) specimens. A simplified welding simulation is eventually conducted on different axis-symmetric geometry and on real valve geometry in order to define a representative sample that will be used for further investigation on residual stresses. (authors)

  2. Heavy water pumps; Pumpe D{sub 2}O

    Energy Technology Data Exchange (ETDEWEB)

    Zecevic, V; Nikolic, M

    1963-12-15

    Continuous increase of radiation intensity was observed on all the elements in the heavy water system during first three years of RA reactor operation. The analysis of heavy water has shown the existence of radioactive cobalt. It was found that cobalt comes from stellite, cobalt based alloy which was used for coating of the heavy water pump discs in order to increase resistance to wearing. Cobalt was removed from the surfaces due to friction, and transferred by heavy water into the reactor where it has been irradiated for 29 876 MWh up to 8-15 Ci/g. Radioactive cobalt contaminated all the surfaces of aluminium and stainless steel parts. This report includes detailed description of heavy water pumps repair, exchange of stellite coated parts, decontamination of the heavy water system, distillation of heavy water. [Serbo-Croat] U toku prve tri godine eksploatacije reaktora RA uocen je neprekidni porast intenziteta zracenja na svim elementima u teskovodnom sistemu. Analizom teske vode utvrdjeno je postojanje radioaktivnog kobalta. Ustanovljeno je da kobalt potice od stelita, legure na bazi kobalta kojim su presvuceni rukavci vratila teskovodnih pumpi radi otpornosi na habanje. Kobalt je trenjem skidan sa povrsina, u toku rada prenosen je teskom vodom u reaktor i ozracivan u toku 29 876 MWh do specificne aktivnosti 8-15 Ci/g. Radioaktivni kobalt je kontaminirao sve povrsine od aluminijuma i nerdjajuceg celika. Ovaj izvestaj sadrzi detaljan opis remonta pumpi, zamene delova teskovodnih pumpi novim delovima bez stelitnog sloja, dekontaminacije teskovodnog sistema, destilacije teske vode.

  3. An investigation of two-body abrasive wear of laser processed surfaces

    International Nuclear Information System (INIS)

    Abass, G.

    1995-01-01

    This paper reports two body abrasive wear studies of alloy and composite deposits produced with a 2 kW continuous wave CO/sub 2/ laser. Stellite alloy 6, Alloy 4815, Stainless steel and SiC powders were used to produce alloy and composite deposits on an En 3b mild steel substrate. The cladding material was injected into the laser produced melt pool by means of a pneumatic powder delivery system. In the present studies instead of using the conventional pin-on-disc method of wear measurement, a more realistic and practical wear testing procedure was adopted. The wear testing machine used was capable of measuring wear of three comparatively larger (30 x 30 x 10 mm) clad samples by abrading simultaneously against a revolving alumina disc. A comparative study of microstructure, hardness and wear of alloy and composite clads was made. The clad deposits were found sound and continuous. The hardness and wear resistance of the composites were markedly higher than that of the alloy clads. (author) 9 figs

  4. Development of high-power CO2 lasers and laser material processing

    Science.gov (United States)

    Nath, Ashish K.; Choudhary, Praveen; Kumar, Manoj; Kaul, R.

    2000-02-01

    Scaling laws to determine the physical dimensions of the active medium and optical resonator parameters for designing convective cooled CO2 lasers have been established. High power CW CO2 lasers upto 5 kW output power and a high repetition rate TEA CO2 laser of 500 Hz and 500 W average power incorporated with a novel scheme for uniform UV pre- ionization have been developed for material processing applications. Technical viability of laser processing of several engineering components, for example laser surface hardening of fine teeth of files, laser welding of martensitic steel shroud and titanium alloy under-strap of turbine, laser cladding of Ni super-alloy with stellite for refurbishing turbine blades were established using these lasers. Laser alloying of pre-placed SiC coating on different types of aluminum alloy, commercially pure titanium and Ti-6Al-4V alloy, and laser curing of thermosetting powder coating have been also studied. Development of these lasers and results of some of the processing studies are briefly presented here.

  5. Preparation of 6,6,1',1',6',6'-hexadeutero sucrose.

    Science.gov (United States)

    Gouy, Marie-Hélène; Danel, Mathieu; Gayral, Maud; Bouchu, Alain; Queneau, Yves

    2007-11-05

    The preparation of 6,6,1',1',6',6'-hexadeutero sucrose is reported. The synthesis is based on a triple oxidation of a protected sucrose 6,1',6'-triol to the corresponding 6,1',6'-tricarboxylic acid or ester, followed by reduction with lithium aluminium deuteride. This triple oxidation could be achieved either using cat. TEMPO-NaOCl (to the acid) or PDC-Ac(2)O-t-BuOH (to the t-butyl carboxylic ester).

  6. RA Reactor operation and maintenance (I-IX), part V, Task 3.08/04-06, Refurbishment of the heavy water pumps

    International Nuclear Information System (INIS)

    Zecevic, V.; Nikolic, M.; Milic, J.

    1963-12-01

    In addition to detailed instructions for maintenance and repair of the heavy water pumps at the RA reactor this document includes nine annexes. They are as follows: cleaning the heavy water pump Avala with distilled water; instructions for repair of the pump CEN-132 (two annexes); list of operating characteristics of the pumps before repair; conclusions of the experts concerning the worn out bearings of the heavy water pump Avala, with the analysis of the stellite layer; report on the completed repair actions on the pumps Avala and CEN-132; report on the measurements done on the pump Avala; and the certificate concerning inspection of the pump

  7. RA Reactor operation and maintenance (I-IX), part V, Task 3.08/04-06, Refurbishment of the heavy water pumps; Pogon i odrzavanje reaktora RA (I-IX), V Deo, Zadatak 3.08/04-06 Remont teskovodnih pumpi

    Energy Technology Data Exchange (ETDEWEB)

    Zecevic, V; Nikolic, M; Milic, J [Institute of Nuclear Sciences Boris Kidric, Reaktor RA, Vinca, Beograd (Serbia and Montenegro)

    1963-12-15

    In addition to detailed instructions for maintenance and repair of the heavy water pumps at the RA reactor this document includes nine annexes. They are as follows: cleaning the heavy water pump Avala with distilled water; instructions for repair of the pump CEN-132 (two annexes); list of operating characteristics of the pumps before repair; conclusions of the experts concerning the worn out bearings of the heavy water pump Avala, with the analysis of the stellite layer; report on the completed repair actions on the pumps Avala and CEN-132; report on the measurements done on the pump Avala; and the certificate concerning inspection of the pump.

  8. Cobalt-60 control in Ontario Hydro reactors

    International Nuclear Information System (INIS)

    Lacy, C.S.

    1988-01-01

    This paper discusses the impact of specifying reduced Cobalt-59 in the primary heat transport circuit materials of construction on the radiation fields developed around the primary circuit. An eight-fold reduction in steam generator radiation fields due to Cobalt-60 has been observed for two identical sets of reactors, one with and one without Cobalt-59 control. The comparison is between eight reactors at the Pickering Nuclear Generating Station (PNGS). Units 5 to 8 (PNGS-B) are identical to Units 1 to 4 (PNGS-A) except that PNGS-B has reduced impurity Cobalt-59 in the alloys of construction and a reduced use of stellite. The effects of chemistry control are also discussed

  9. Synthesis and characterization of [Ru(η6-C6Me6)Cl2(CNPy)] and [Cl2(η6-C6Me6)Ru-(μ-CNPy)-Ru(η6-C6Me6)Cl2] and reactivity of [Ru(η6-C6Me6)Cl2(CNPy)] with various bases

    International Nuclear Information System (INIS)

    Pandey, D.S.; Sahay, A.N.; Agarwala, U.C.

    1996-01-01

    Reactions of [(Ru(η 6 -C 6 Me 6 )Cl 2 ) 2 ] with 4-cyanopyridine leads to the formation of neutral mono and dimeric complexes viz., [Ru(η 6 C 6 Me 6 )Cl 2 (CNPy)] (I) and [Cl 2 (η 6 -C 6 Me 6 ) Ru-(μ-CNPy)-Ru(η 6 -C 6 Me 6 )Cl 2 ] (II). Complex (I) undergoes metathetical reactions with EPh 3 (E=P, As and Sb) and N-donor heterocyclic bases yielding corresponding substitutional products which have been characterized by elemental analyses and spectroscopic: (IR, UV/vis, 1 H and 13 C NMR) studies. (author). 21 refs., 1 tab

  10. Laser fabrication nanocrystalline coatings using simultaneous powders/wire feed

    Science.gov (United States)

    Li, Jianing; Zhai, Tongguang; Zhang, Yuanbin; Shan, Feihu; Liu, Peng; Ren, Guocheng

    2016-07-01

    Laser melting deposition (LMD) fabrication is used to investigate feasibilty of simultaneously feeding TC17 wire and the Stellite 20-Si3N4-TiC-Sb mixed powders in order to increase the utilization ratio of materials and also quality of LMD composite coatings on the TA1 substrate. SEM images indicated that such LMD coating with metallurgical joint to substrate was formed free of the obvious defects. Lots of the ultrafine nanocrystals (UNs) were produced, which distributed uniformly in some coating matrix location, retarding growth of the ceramics in a certain extent; UNs were intertwined with amorphous, leading the yarn-shape materials to be produced. Compared with substrate, an improvement of wear resistance was achieved for such LMD coating.

  11. Reducing plant radiation fields by source term reduction - tracking cobalt and antimony to their sources at Gentilly-2

    International Nuclear Information System (INIS)

    Gauthier, P.; Guzonas, D.A.

    2006-01-01

    Gentilly-2 NGS is experiencing high radiation fields in the fuelling machine vaults. These high fields make maintenance outages more expensive and their management more complicated. As part of the station refurbishment project, a task group was created to identify the cause of the high fields and make recommendations to prevent their reoccurrence in the second (post-refurbishment) operating cycle. To identify the root cause of the problem, the task group decided to analyse the primary heat transport system (PHTS), the fuel handling system and their inter-relation. Gentilly-2 has had to manage a unique (to CANDU) problem arising from antimony released from the main heat transport pump seals. Antimony deposits on in-core surfaces, becomes activated, and subsequently can be released, especially under oxidizing coolant conditions. It then becomes incorporated into the magnetite deposits on PHTS piping, including the steam generators and inlet feeders. Gentilly-2 has focused a great deal of effort on managing antimony over the last 15 years. As a result of these initiatives, radioantimony fields have been quite effectively managed since 1997, resulting in a decrease in their relative contribution to the total fields. The decrease in radioantimony fields highlighted the significant contribution of 60 Co cobalt activity; the high levels of both radioantimony and 60 Co differentiate Gentilly-2 from other CANDU 6 plants. Two types of 59 Co sources are present in the CANDU PHTS. High surface area materials such as steam generator tubes and feeder pipes contain trace concentrations of 59 Co as an impurity, which can be released by corrosion. Low surface area materials such as Stellites contain high concentrations of 59 Co that can be released as either corrosion or wear products. After assessing potential cobalt sources, the task group concluded that PHTS materials were not likely the origin of the high 60 Co fields. The major PHTS components identified as cobalt sources have

  12. Production and Characterization of WC-Reinforced Co-Based Superalloy Matrix Composites

    Science.gov (United States)

    Özgün, Özgür; Dinler, İlyas

    2018-05-01

    Cobalt-based superalloy matrix composite materials were produced through the powder metallurgy technique using element powders at high purity and nano-sized wolfram carbide (WC) reinforcement in this study. An alloy that had the same chemical composition as the Stellite 6 alloy but not containing carbon was selected as the matrix alloy. The powder mixtures obtained as a result of mixing WC reinforcing member and element powders at the determined ratio were shaped by applying 300 MPa of pressure. The green components were sintered under argon atmosphere at 1240 °C for 120 minutes. The densities of the sintered components were determined by the Archimedes' principle. Microstructural characterization was performed via X-ray diffraction analysis, scanning electron microscope examinations, and energy-dispersive spectrometry. Hardness measurements and tensile tests were performed for determining mechanical characteristics. The relative density values of the sintered components increased by increasing the WC reinforcement ratio and they could almost reach the theoretical density. It was determined from the microstructural examinations that the composite materials consisted of fine and equiaxed grains and coarse carbides demonstrating a homogeneous dispersion along the microstructure at the grain boundaries. As it was the case in the density values, the hardness and strength values of the composites increased by increasing the WC ratio.

  13. Hardfacing and packings for improved valve performance

    International Nuclear Information System (INIS)

    Aikin, J.A.; Patrick, J.N.F.; Inglis, I.

    2003-01-01

    The CANDU Owners Group (COG), Chemistry, Materials and Components (CMC) Program has supported an ongoing program on valve maintenance and performance for several years. An overview is presented of recent work on iron-based hardfacing, packing qualification, friction testing of polytetrafluoroethylene (PTFE) packings, and an investigation of re-torquing valve packing. Based on this program, two new valve-packing materials have been qualified for use in CANDU stations. By doing this, CANDU maintenance can avoid having only one packing qualified for station use, as well as assess the potential impact of the industry trend towards using lower gland loads. The results from corrosion tests by AECL and the coefficient of friction studies at Battelle' s tribology testing facilities on Delcrome 910, an iron-based hardfacing alloy, indicate it is an acceptable replacement for Stellite 6 under certain conditions. This information can be used to update in-line valve purchasing specifications. The renewed interest in friction characteristics, and environmental qualification (EQ) of packing containing PTFE has resulted in a new test program in these areas. The COG-funded valve programs have resulted in modifications to design specifications for nuclear station in-line valves and have led to better maintenance practices and valve reliability. In the end, this means lower costs and cheaper electricity. (author)

  14. Thio-, selenido-, and telluridogermanates(III): K/sub 6/Ge/sub 2/S/sub 6/, K/sub 6/Ge/sub 2/Se/sub 6/, and Na/sub 6/Ge/sub 2/Te/sub 6/

    Energy Technology Data Exchange (ETDEWEB)

    Eisenmann, B; Kieselbach, E; Schaefer, H; Schrod, H [Technische Hochschule Darmstadt (Germany, F.R.). Fachbereich Anorganische Chemie und Kernchemie

    1984-09-01

    The new compounds K/sub 6/Ge/sub 2/S/sub 6/ and K/sub 6/Ge/sub 2/Se/sub 6/ crystallize in the monoclinic system, space group C2/m (No 12). The compounds are isotypic and form the K/sub 6/Si/sub 2/Te/sub 6/ structure. Na/sub 6/Ge/sub 2/Te/sub 6/ crystallizes in the K/sub 6/Sn/sub 2/Te/sub 6/ structure, monoclinic, space group P2/sub 1//c (No 14). The lattice constants are given.

  15. Microstructural evolution and control in laser material processing

    International Nuclear Information System (INIS)

    Kaul, R.; Nath, A.K.

    2005-01-01

    Laser processing, because of its characteristic features, often gives rise to unique microstructure and properties not obtained with other conventional processes. We present various diverse laser processing case studies involving control of microstructure through judicious selection of processing parameters carried out with indigenously developed high power CO 2 lasers. The first study describes microstructural control during end plug laser welding of PFBR fuel pin, involving crack pone alloy D9 tube and type 316 M stainless steel (SS) plug, through preferential displacement of focused laser beam. Crater and associated cracks were eliminated by suitable laser power ramping. Another case study describes how low heat input characteristics of laser cladding process has been exploited for suppressing dilution in 'Colomony 6' deposits on austenitic SS. The results are in sharp contrast to extensive dilution noticed in Colmony 6 hard faced deposits made by GTAW. A novel laser surface melting (LSM) treatment for type 316 (N) SS weld metal has been developed to generate a sensitization-resistant microstructure which leads to enhanced resistance against intergranular corrosion (IGC). IGC resistance of laser treated surface has been found to be critically dependent on laser processing parameters. Experimental observations have been analyzed with thermal simulation. We have also studied the effect of laser beam spatial intensity profile on the microstructure in LSM. We have developed laser-assisted graded hard facing of austenitic SS substrate with Stellite 6 which, in contrast to direct deposition either by laser or GTAW, produced smooth transition in chemical composition and hardness used to control grain coarsening and martensite formation in type 430 SS weldment. Laser rapid manufacturing (LRM) is emerging as a new rapid and cost effective process for low volume fabrication, esp. of expensive materials. The talk will also present microstructural characteristics of laser

  16. 39 CFR 6.6 - Quorum and voting.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Quorum and voting. 6.6 Section 6.6 Postal Service....6 Quorum and voting. As provided by 39 U.S.C. 205(c), the Board acts by resolution upon a majority... the compensation and benefits of the Postmaster General and Deputy Postmaster General, 39 U.S.C. 205(c...

  17. RADTRAN 6/RadCat 6 user guide.

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F.; Hinojosa, Daniel; Heames, Terence John; Farnum, Cathy Ottinger; Kalinina, Elena Arkadievna

    2013-09-01

    This document provides a detailed discussion and a guide for the use of the RadCat 6.0 Graphical User Interface input file generator for the RADTRAN code, Version 6. RadCat 6.0 integrates the newest analysis capabilities of RADTRAN 6.0, including an economic model, updated loss-of-lead shielding model, a new ingestion dose model, and unit conversion. As of this writing, the RADTRAN version in use is RADTRAN 6.02.

  18. 48 CFR 6.302-6 - National security.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false National security. 6.302-6... COMPETITION REQUIREMENTS Other Than Full and Open Competition 6.302-6 National security. (a) Authority. (1... for when the disclosure of the agency's needs would compromise the national security unless the agency...

  19. Recent experience about the influence of primary coolant and shutdown chemistry on cobalt activity at Beznau NPP

    International Nuclear Information System (INIS)

    Mailand, I.; Venz, H.

    2007-01-01

    The Beznau nuclear power plant comprises two identical 380 MWe PWR units, commissioned in 1969 and 1971. The surfaces of the new steam generator tube material, Inconel 690, are the main source of 58 Co. The 60 Co originates predominantly from the Cobalt alloy, Stellite, which is installed in valves and pump bearings because of the very good hardness of this material. By means of optimised shutdown chemistry it is possible to reduce the amount of NiO on the fuel rods, leading to reduced Co-58 peaks in subsequent cycles. The optimised shutdown chemistry during the past few years and especially the strict separation of acid-reducing phase from the acid-oxidising phase as well as the results of studies and the resulting operational experiences are important basics for the actual operation mode of the Beznau NPP. (orig.)

  20. I6-FPS: Automating the ICMPv6 Filtering Rules

    Directory of Open Access Journals (Sweden)

    Wan Ali Wan Nor Ashiqin

    2018-01-01

    Full Text Available Enterprises are required to utilize Internet Control Message Protocol version 6 (ICMPv6 when IPv6 is deployed. In IPv4, Internet Control Message Protocol (ICMP is aggressively filtered by a network administrator while in IPv6, ICMPv6 messages cannot be aggressively filtered due to the function of ICMPv6 message. ICMPv6 security risks increase when ICMPv6 threats and vulnerabilities are exploited. Thus, it is very crucial for enterprises to address the issues. In practice, network researchers must review several resources to identify ICMPv6 related attacks occurring due to the exploitation of ICMPv6 vulnerabilities. Overlooking any of these issues will jeopardize the security of ICMPv6. While conducting the attack scenarios testing, IPv6-Filtering Prototype System (I6-FPS was developed to overcome the deficiency and limited filtering tools that supported IPv6 filtering rules (ip6table. I6-FPS is used to automate and simplify the writing of ip6table and it was developed using PHP5 and Shell script languages. This research revealed that I6-FPS is significant in the initial phase of securing IPv6 deployment as well as focusing on the ICMPv6 filtering rules. The I6-FPS has the potential to be enhanced and developed over time by including more functions to that system in generating specific filtering ip6table rules.

  1. Photochemical removal of NpF6 and PuF6 from UF6 gas streams

    International Nuclear Information System (INIS)

    Beitz, J.V.; Williams, C.W.

    1990-01-01

    A novel photochemical method of removing reactive fluorides from UF 6 gas has been discovered. This method reduces generated waste to little more than the volume of the removed impurities, minimizes loss of UF 6 , and can produce a recyclable by-product, fluorine gas. In our new method, impure UF 6 , is exposed to ultraviolet light which dissociates the UF 6 to UF 5 and fluorine atom. Impurities which chemically react with UF 5 are reduced and form solid compounds easily removed from the gas while UF 5 is converted back to UF 6 . Proof-of-concept testing involved UF 6 containing NpF 6 and PuF 6 with CO added as a fluorine atom scavenger. In a single photolysis step, greater than 5000-fold reduction of PuF 6 was demonstrated while reducing NpF 6 by more than 40-fold. This process is likely to remove corrosion and fission product fluorides that are more reactive than UF 6 and has been demonstrated without an added fluorine atom scavenger by periodically removing photogenerated fluorine gas. 44 refs., 3 figs., 2 tabs

  2. Radiolabeling and animal experimental studies of anti-breast cancer McAb 6C6 and mouse-human chimeric antibody 6C6CHI

    International Nuclear Information System (INIS)

    Yang Zhi; Hu Xiaoqian; Li Erqiu

    2003-01-01

    The aim of this work is to study bio-distribution and tumor absorption of anti breast cancer monoclonal antibody 6C6 and its chimeric antibody 6C6-CHI. The modified Schwartz method was employed to label 6C6 and 6C6CHI with 99 Tc m . The labeled antibody was injected to mouse via tail vein and the blood clearance and whole body clearance were observed. Nude mice bearing breast cancer MCF7 were injected with 99 Tc m -labeled antibody and the bio-distribution was studied and imaged with γ-ray camera. The yield of the two labeled antibodies was more than 90% and their immunoactivities were more than 80%. The whole body eliminated half-time of 99 Tc m -6C6 was 4.1h, and the half-times in blood were T α =0.55h and T β =12.42h respectively. The whole body half-time of 99 Tc m -6C6CHI was 4.28h and the half-times in blood were T α =0.98h and T β =12.42h respectively. The bio-distribution of nude mice bearing breast cancer MCF7 cells was as follows: the ID%/g of tumor and blood was (7.42±0.85) and (5.67±1.44) respectively at 23h after injection of 99 Tc m -6C6. The T/NT (tumor to non tumor) ratios were all more than 1.0 except kidney and the ID%/g of tumor and blood was (4.23±0.64) and (6.97±0.23) respectively at 23 h after injection of 99 Tc m -6C6CHI. The T/NT (tumor to non tumor) ratios were all more than 1.0 except blood and kidney. The γ imaging results showed that the tumor was imaged clearly at 24h after injection of radiolabeled antibodies and the other organs did not concentrate the antibodies except kidney. Anti-breast cancer monoclonal antibody 6C6 can be well located in tumor. Although ID%/g of tumor of the chimeric antibody 6C6CHI was slightly lower than that of 6C6 antibody, and ID%/g of blood was higher than that of 6C6, the tumor imaging of 6C6-CHI was also clear

  3. Interrogating the vibrational relaxation of highly excited polyatomics with time-resolved diode laser spectroscopy: C6H6, C6D6, and C6F6+CO2

    International Nuclear Information System (INIS)

    Sedlacek, A.J.; Weston, R.E. Jr.; Flynn, G.W.

    1991-01-01

    The vibrational relaxation of highly excited ground state benzene, benzene d 6 , and hexafluorobenzene by CO 2 has been investigated with high resolution diode laser spectroscopy. The vibrationally hot polyatomics are formed by single photon 248 nm excitation to the S 1 state followed by rapid radiationless transitions. It has been found that in all cases less than 1% of the energy initially present in the polyatomics is deposited into the high frequency mode of CO 2 (ν 3 ). An investigation of the CO 2 (00 0 1) nascent rotational distribution under single collision conditions reveals that very little rotational excitation accompanies vibrational energy transfer to the ν 3 mode. The CO 2 (ν 3 ) rotational states can be described by temperatures, T rot , as follows: C 6 H 6 , T rot =360±30 K; C 6 D 6 , T rot =350±35 K and C 6 F 6 , T rot =340±23 K. An estimate of left-angle ΔE right-angle ν3 , the mean energy transferred to the CO 2 ν 3 mode per collision, suggests that as the availability of low frequency modes in the excited molecule increases, less energy is deposited into the high frequency mode of CO 2 . Finally, evidence is presented suggesting that even at moderate laser fluences, the two-photon ionization of benzene can lead to substantial CO 2 ν 3 excitation via electron+CO 2 inelastic collisions

  4. Global brain storming : oil companies increasingly tap collective intelligence to overcome technology hurdles

    Energy Technology Data Exchange (ETDEWEB)

    Smith, M.

    2009-04-15

    This article described a novel exploration approach that Toronto-based Goldcorp Inc. took a decade ago when it placed its geological data on the web for a mass collaboration effort among the global community of geologists to identify potential drilling sites. The move resulted in the identification of 110 targets, of which half were entirely new to Goldcorp, and of which four in five struck considerable quantities of gold. The article emphasized that the computer network offers a power that has not yet been fully tapped. It described other companies that have followed suite in finding solutions to proprietary challenges, including Schlumberger, Deloro Resources Ltd., Electro-Petroleum Inc., and Proctor and Gamble Inc. among others. The Web 2.0, which serves as a platform for a range of applications, can also be used for open-source science or global brainstorming. While the idea of open innovation was a novelty a year or two ago, it has now become a necessity. InnoCentive solved a long-standing oil spill problem when a chemist from the web with no ties to the oil industry suggested a way to handle the spill. The Cordova, Alaska-based Oil Spill Recovery Institute has also sought solutions for oil spills and novel boom designs. It was concluded that at a time when research and development budgets in the petroleum industry are being cut, open innovation facilitators stand to benefit. This cross-industry collaboration does not involve geoscientists alone. Rather, it includes people from completely different fields of expertise, experience or education who can add to the real issues that the oil industry needs to address and change. 1 ref.

  5. Structural comparison of nanocomposites membranes of polyamide 6 and polyamide 6.6 with a regional clay; Comparacao estrutural de membranas de nanocompositos de poliamida 6 e poliamida 6.6 com uma argila regional

    Energy Technology Data Exchange (ETDEWEB)

    Leite, A M.D.; Medeiros, V N; Paz, R A; Araujo, E M; Lira, H.L., E-mail: amandamelissa.lins@yahoo.com.b [Universidade Federal de Campina Grande (UAEMa/UFCG), PB (Brazil). Unidade Academica de Engenharia de Materiais; Ito, Edson N [Universidade Federal do Rio Grande do Norte (DEMat/UFRN), Natal, RN (Brazil). dept. de Engenharia de Materiais

    2010-07-01

    Polyamide membranes do not require wetting agents because they are hydrophilic membranes and show great interest in the separation of aqueous solutions. With this, there is the interest to produce membranes from nanocomposites (polyamide 6 and polyamide 6.6)/organoclay), using the technique of isothermal immersion-precipitation in a bath with distilled water. The objective of this work was to produce, characterize and compare nanocomposites of polyamide 6 and polyamide 6.6/organoclay for use in the preparation of membranes. The nanocomposites were produced with 3 wt% of clay organically modified by quaternary ammonium salt (Cetremide) and were characterized by XRD and TEM. The nanocomposites presented an exfoliated/partially exfoliated structure. The membranes were characterized by SEM and presented a dense layer (selective skin) and another layer with uniform pores distributed along the membrane. (author)

  6. Structurally Integrated Coatings for Wear and Corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Beardsley, M. Brad; Sebright, Jason L.

    2008-11-18

    techniques, balanced with overall materials performance. State-of-the-art design and simulation capabilities were used to guide materials and process refinement. Caterpillar was the lead of the multi-partner collaborative project. Specific tasks were performed by the partners base on their unique capabilities. The project team was selected to include leaders in the field of material development, processing, modeling, and material characterization. Specifically, industrial members include the suppliers Deloro Stellite and Powder Alloy Corporation., who provided the experimental alloys and who aided in the development of the costs for the alloys, the Missouri University of Science and Technology and Iowa State University, who provided help in the alloy development and material characterization, QuesTek Innovations, a small company specializing the microstructural modeling of materials, and the DOE laboratories, Oak Ridge National Laboratory and National Energy Technology Laboratory (Albany), who provided unique coating process capability and wear characterization testing. The technologies developed in this program are expected to yield energy savings of about 50% over existing technologies, or 110 trillion BTUs per year by 2020 when fully implemented. Primary applications by Caterpillar are to replace the surface of machine components which are currently carburized and heat treated with new cladding materials with double the wear life. The new cladding technologies will consume less energy than carburizing. Thus, nearly 50% energy savings can be expected as a result from elimination of the heat treat process and the reduce wear of the materials. Additionally, when technologies from this project are applied on titanium or other non-ferrous substrates to make lighter weight, more wear resistant, and more efficient structures, significant fuel savings can be realized. With the anticipated drastic reduction in cost for refining titanium-containing ores, the usage of titanium

  7. Stellite failure on a P91 HP valve - failure investigation and modelling of residual stresses

    DEFF Research Database (Denmark)

    Thorborg, Jesper; Hald, John; Hattel, Jesper Henri

    2006-01-01

    , and this provides a tool for process modification in order to minimize the risk for future breakdown. Both classical time independent and time dependent plasticity models have been used to describe the different material behaviours during the different process steps. The description of the materials is highly...

  8. 26 x 6.6 radial-belted aircraft tire performance

    Science.gov (United States)

    Davis, Pamela A.; Martinson, Veloria J.; Yager, Thomas J.; Stubbs, Sandy M.

    1991-01-01

    Preliminary results from testing of 26 x 6.6 radial-belted and bias-ply aircraft tires at NASA Langley's Aircraft Landing Dynamics Facility (ALDF) are reviewed. The 26 x 6.6 tire size evaluation includes cornering performance tests throughout the aircraft ground operational speed range for both dry and wet runway surfaces. Static test results to define 26 x 6.6 tire vertical stiffness properties are also presented and discussed.

  9. Synthesis Of NiCrAlC alloys by mechanical alloying; Sintese de ligas NiCrAlC por moagem de alta energia

    Energy Technology Data Exchange (ETDEWEB)

    Silva, A.K.; Pereira, J.I.; Vurobi Junior, S.; Cintho, O.M., E-mail: alissonkws@gmail.co [Universidade Estadual de Ponta Grossa (UEPG), PR (Brazil)

    2010-07-01

    The purpose of the present paper is the synthesis of nickel alloys (NiCrAlC), which has been proposed like a economic alternative to the Stellite family Co alloys using mechanical alloying, followed by sintering heat treatment of milled material. The NiCrAlC alloys consist of a chromium carbides dispersion in a Ni{sub 3}Al intermetallic matrix, that is easily synthesized by mechanical alloying. The use of mechanical alloying enables higher carbides sizes and distribution control in the matrix during sintering. We are also investigated the compaction of the processed materials by compressibility curves. The milling products were characterized by X-ray diffraction, and the end product was featured by conventional metallography and scanning electronic microscopy (SEM), that enabled the identification of desired phases, beyond microhardness test, which has been shown comparable to alloys manufactured by fusion after heat treating. (author)

  10. Synthesis Of NiCrAlC alloys by mechanical alloying

    International Nuclear Information System (INIS)

    Silva, A.K.; Pereira, J.I.; Vurobi Junior, S.; Cintho, O.M.

    2010-01-01

    The purpose of the present paper is the synthesis of nickel alloys (NiCrAlC), which has been proposed like a economic alternative to the Stellite family Co alloys using mechanical alloying, followed by sintering heat treatment of milled material. The NiCrAlC alloys consist of a chromium carbides dispersion in a Ni 3 Al intermetallic matrix, that is easily synthesized by mechanical alloying. The use of mechanical alloying enables higher carbides sizes and distribution control in the matrix during sintering. We are also investigated the compaction of the processed materials by compressibility curves. The milling products were characterized by X-ray diffraction, and the end product was featured by conventional metallography and scanning electronic microscopy (SEM), that enabled the identification of desired phases, beyond microhardness test, which has been shown comparable to alloys manufactured by fusion after heat treating. (author)

  11. Experimental evaluation of the wear of the PEC type fuel element base. Tribological experimental studies in Na at high temperature

    International Nuclear Information System (INIS)

    D'Agraives, B.C.; Volcan, A.; Bacchilega, A.

    1978-01-01

    Tribological studies in sodium, related to the PEC-type fuel element design are presented. They are aimed at the simulation of friction and wear phenomena which are expected to occur on the surface of fuel element components undergoing solid-solid contact situations with variable loads and/or variable motions. In this first paper, a description of the preparatory work is given. Then, results related to long-duration experiments are shown with respect to the contact between the centering spherical ring belonging to the lower extension of the subassembly, and the cylindrical sleeve of the grid in which it takes place. After 1000 hours under loaded and vibrated conditions, in sodium at 400 0 C, the wear effects suffered by both contacting samples, are observed and evaluated. The stellite surfaces of the samples are damaged to a not-negligible extent and material transfers from the cylindrical sleeve onto the spherical ring occur

  12. A strategic approach to [6,6]-bicyclic lactones

    DEFF Research Database (Denmark)

    Jepsen, Tue Heesgaard; Glibstrup, Emil; Crestey, Francois Louis Jean

    2017-01-01

    We report an effective synthetic protocol to access [6,6]-bicyclic lactone moieties through a regio- and stereoselective intramolecular Mizoroki–Heck cross-coupling reaction followed by a 6π-electrocyclization. This method enabled the first synthesis of the elusive CD fragment of the Erythrina...

  13. Dimensional stability of Ti--6Al--6V--2Sn

    International Nuclear Information System (INIS)

    Rack, H.J.

    1978-08-01

    The dimensional stability of Ti-6Al-6V-2Sn has been examined. It is shown that in the duplex annealed condition Ti-6Al-6V-2Sn is dimensionally stable at temperatures up to 448 0 K for 512 hrs. Solution treated Ti-6Al-6V-2Sn undergoes large dimensional changes during both initial aging between 673 and 973 0 K and subsequent exposure to low temperatures ( 0 K). These results indicate that if close dimensional tolerances must be maintained, duplex annealed Ti-6Al-6V-2Sn should be selected. Selection of treated and aged Ti-6Al-6V-2Sn should only be considered if accompanied by full scale environmental testing

  14. Underestimation of glucose turnover measured with [6-3H]- and [6,6-2H]- but not [6-14C]glucose during hyperinsulinemia in humans

    International Nuclear Information System (INIS)

    McMahon, M.M.; Schwenk, W.F.; Haymond, M.W.; Rizza, R.A.

    1989-01-01

    Recent studies indicate that hydrogen-labeled glucose tracers underestimate glucose turnover in humans under conditions of high flux. The cause of this underestimation is unknown. To determine whether the error is time-, pool-, model-, or insulin-dependent, glucose turnover was measured simultaneously with [6-3H]-, [6,6-2H2]-, and [6-14C]glucose during a 7-h infusion of either insulin (1 mU.kg-1.min-1) or saline. During the insulin infusion, steady-state glucose turnover measured with both [6-3H]glucose (8.0 +/- 0.5 mg.kg-1.min-1) and [6,6-2H2]glucose (7.6 +/- 0.5 mg.kg-1.min-1) was lower (P less than .01) than either the glucose infusion rate required to maintain euglycemia (9.8 +/- 0.7 mg.kg-1.min-1) or glucose turnover determined with [6-14C]glucose and corrected for Cori cycle activity (9.8 +/- 0.7 mg.kg-1.min-1). Consequently negative glucose production rates (P less than .01) were obtained with either [6-3H]- or [6,6-2H2]- but not [6-14C]glucose. The difference between turnover estimated with [6-3H]glucose and actual glucose disposal (or 14C glucose flux) did not decrease with time and was not dependent on duration of isotope infusion. During saline infusion, estimates of glucose turnover were similar regardless of the glucose tracer used. High-performance liquid chromatography of the radioactive glucose tracer and plasma revealed the presence of a tritiated nonglucose contaminant. Although the contaminant represented only 1.5% of the radioactivity in the [6-3H]glucose infusate, its clearance was 10-fold less (P less than .001) than that of [6-3H]glucose. This resulted in accumulation in plasma, with the contaminant accounting for 16.6 +/- 2.09 and 10.8 +/- 0.9% of what customarily is assumed to be plasma glucose radioactivity during the insulin or saline infusion, respectively (P less than .01)

  15. 6 CFR 13.6 - Prerequisites for issuing a Complaint.

    Science.gov (United States)

    2010-01-01

    ... 6 Domestic Security 1 2010-01-01 2010-01-01 false Prerequisites for issuing a Complaint. 13.6 Section 13.6 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY PROGRAM FRAUD CIVIL REMEDIES § 13.6 Prerequisites for issuing a Complaint. (a) The Reviewing Official may issue a...

  16. OMEGA 6

    Directory of Open Access Journals (Sweden)

    Fivi Melva Diana

    2012-09-01

    Full Text Available Kejadian gizi kurang di Indonesia dari tahun ke tahun masihtinggi Penyebab tingginya angka kejadian gizi kurang di Indonesia salah satunya diduga karena kurangnya konsumsi makanan sumber omega 6, secara alami terdapat pada minyak biji-bijian, minyakjagung dan kacang kedelai. Omega 6 merupakan asam lemak tak jenuh ganda yang mempunyai banyak manfaat terutama untuk pertumbuhan dan perkembangan kecerdasan balita. Tulisan ini membahas tentang defenisi omega 6, sumber, klasifikasi, manfaat dan kerugian bila mengkonsumsi omega 6. Disarankan untuk melakukan penelitian lebih lanjut mengenai hubungan konsumsi omega 6 dengan tumbuh-kembang anak, selain itu bagi ibu-ibu disarankan untuk memperhatikan konsumsi makanan dari sumber omega 6 guna pengoptimalan tumbuh-kembang anak. Hal ini jika terlaksana dapat memberikan dukungan terhadap program pemerintah di bidang promosi kesehatan.

  17. DWPF SB6 Initial CPC Flowsheet Testing SB6-1 TO SB6-4L Tests Of SB6-A And SB6-B Simulants

    International Nuclear Information System (INIS)

    Lambert, D.; Pickenheim, B.; Best, D.

    2009-01-01

    The Defense Waste Processing Facility (DWPF) will transition from Sludge Batch 5 (SB5) processing to Sludge Batch 6 (SB6) processing in late fiscal year 2010. Tests were conducted using non-radioactive simulants of the expected SB6 composition to determine the impact of varying the acid stoichiometry during the Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator (SME) processes. The work was conducted to meet the Technical Task Request (TTR) HLW/DWPF/TTR-2008-0043, Rev.0 and followed the guidelines of a Task Technical and Quality Assurance Plan (TT and QAP). The flowsheet studies are performed to evaluate the potential chemical processing issues, hydrogen generation rates, and process slurry rheological properties as a function of acid stoichiometry. These studies were conducted with the estimated SB6 composition at the time of the study. This composition assumed a blend of 101,085 kg of Tank 4 insoluble solids and 179,000 kg of Tank 12 insoluble solids. The current plans are to subject Tank 12 sludge to aluminum dissolution. Liquid Waste Operations assumed that 75% of the aluminum would be dissolved during this process. After dissolution and blending of Tank 4 sludge slurry, plans included washing the contents of Tank 51 to ∼1M Na. After the completion of washing, the plan assumes that 40 inches on Tank 40 slurry would remain for blending with the qualified SB6 material. There are several parameters that are noteworthy concerning SB6 sludge: (1) This is the second batch DWPF will be processing that contains sludge that has had a significant fraction of aluminum removed through aluminum dissolution; (2) The sludge is high in mercury, but the projected concentration is lower than SB5; (3) The sludge is high in noble metals, but the projected concentrations are lower than SB5; and(4) The sludge is high in U and Pu - components that are not added in sludge simulants. Six DWPF process simulations were completed in 4-L laboratory-scale equipment using

  18. Aespoe Task Force on modelling of groundwater flow and transport of solutes. Review of Tasks 6D, 6E, 6F and 6F2

    International Nuclear Information System (INIS)

    Hodgkinson, David

    2007-09-01

    This report forms part of an independent review of the specifications, execution and results of Task 6 of the Aespoe Task Force on Modelling of Groundwater Flow and Transport of Solutes, which is seeking to provide a bridge between site characterization and performance assessment approaches to modelling solute transport in fractured rock. The objectives of Task 6 are: To assess simplifications used in Performance Assessment (PA) models. To determine how, and to what extent, experimental tracer and flow experiments can constrain the range of parameters used in PA models. To support the design of Site Characterisation (SC) programmes to ensure that the results have optimal value for performance assessment calculations. To improve the understanding of site-specific flow and transport behaviour at different scales using site characterisation models. The present report is concerned with Tasks 6D, 6E, 6F and 6F2. It follows on from two previous reviews of Tasks 6A, 6B and 6B2, and Task 6C. In Task 6D the transport of tracers through a fracture network is modelled using the conditions of the C2 TRUE-Block Scale tracer test, based on the synthetic structural model developed in Task 6C. Task 6E extends the Task 6D transport calculations to a reference set of PA time scales and boundary conditions. Task 6F consists of a series of 'benchmark' studies on single features from the Task 6C hydrostructural model in order to improve the understanding of differences between the participating models. Task 6F2 utilises models set up for Tasks 6E and 6F to perform additional sensitivity studies with the aim of increasing the understanding of how models behave, the reason for differences in modelling results, and the sensitivity of models to various assumptions and parameter values. Eight modelling teams representing five organisations participated in this exercise using Discrete Fracture Network (DFN), continuum and channel network concepts implemented in a range of different codes and

  19. Aespoe Task Force on modelling of groundwater flow and transport of solutes. Review of Tasks 6D, 6E, 6F and 6F2

    Energy Technology Data Exchange (ETDEWEB)

    Hodgkinson, David (Quintessa, Henley-on-Thames (GB))

    2007-09-15

    This report forms part of an independent review of the specifications, execution and results of Task 6 of the Aespoe Task Force on Modelling of Groundwater Flow and Transport of Solutes, which is seeking to provide a bridge between site characterization and performance assessment approaches to modelling solute transport in fractured rock. The objectives of Task 6 are: To assess simplifications used in Performance Assessment (PA) models. To determine how, and to what extent, experimental tracer and flow experiments can constrain the range of parameters used in PA models. To support the design of Site Characterisation (SC) programmes to ensure that the results have optimal value for performance assessment calculations. To improve the understanding of site-specific flow and transport behaviour at different scales using site characterisation models. The present report is concerned with Tasks 6D, 6E, 6F and 6F2. It follows on from two previous reviews of Tasks 6A, 6B and 6B2, and Task 6C. In Task 6D the transport of tracers through a fracture network is modelled using the conditions of the C2 TRUE-Block Scale tracer test, based on the synthetic structural model developed in Task 6C. Task 6E extends the Task 6D transport calculations to a reference set of PA time scales and boundary conditions. Task 6F consists of a series of 'benchmark' studies on single features from the Task 6C hydrostructural model in order to improve the understanding of differences between the participating models. Task 6F2 utilises models set up for Tasks 6E and 6F to perform additional sensitivity studies with the aim of increasing the understanding of how models behave, the reason for differences in modelling results, and the sensitivity of models to various assumptions and parameter values. Eight modelling teams representing five organisations participated in this exercise using Discrete Fracture Network (DFN), continuum and channel network concepts implemented in a range of different

  20. 76 FR 5467 - Airworthiness Directives; Pilatus Aircraft Ltd. Models PC-6, PC-6-H1, PC-6-H2, PC-6/350, PC-6/350...

    Science.gov (United States)

    2011-02-01

    ...;Prices of new books are listed in the first FEDERAL REGISTER issue of each #0;week. #0; #0; #0; #0;#0..., Fairchild Heli Porter PC-6 airplanes, or Fairchild-Hiller Corporation PC-6 airplanes. Discussion Section... [[Page 5469

  1. Atividade da 6-fosfogliconato desidrogenase em deficientes de glicose-6-fosfato desidrogenase Activity of 6-phosphogluconate dehydrogenase in glucose-6-phosphate dehydrogenase deficiency

    Directory of Open Access Journals (Sweden)

    Daniela B. Nicolielo

    2006-06-01

    Full Text Available As enzimas G6PD e 6PGD são responsáveis pela geração do aporte de NADPH, necessário para a detoxificação dos agentes oxidantes produzidos pelo estresse oxidativo metabólico nos eritrócitos. Devido à alta prevalência de deficiência de G6PD na população mundial, principalmente de origem negróide africana, muitos estudos têm sido realizados na tentativa de conhecer melhor a atuação destas enzimas. O objetivo deste estudo foi avaliar a atividade enzimática da 6PGD, nos deficientes de G6PD, para verificar a existência de aumento da atividade desta enzima, correlacionando com um possível aumento do número de reticulócitos ou presença de alterações da série vermelha. A pesquisa em 2.657 indivíduos do sexo masculino resultou em 97 deficientes de G6PD, determinando uma prevalência de 3,65% para a região de Bauru (SP, com atividade enzimática média de G6PD de 1,74 UI.g Hb-1. min-1 a 37ºC, 14,4% da atividade da G6PD normal. A atividade enzimática média da 6PGD foi de 9,5 UI.g Hb-1. min-1 a 37ºC, estando aumentada em 47,4% dos deficientes de G6PD. Os resultados não confirmaram que a hipótese do aumento da atividade enzimática da 6PGD, em deficientes de G6PD, seja decorrente da presença de um número aumentado de reticulócitos na corrente circulatória, faixa etária ou alterações eritrocitométricas que denotem anemia. O mais provável é que a hemólise autolimitada, imposta pelos processos oxidativos, preserve os eritrócitos mais jovens, que possuem atividade enzimática mais elevada, uma vez que naturalmente ocorre diminuição da atividade destas enzimas com o envelhecimento celular.The G6PD and 6PGD enzymes are responsible for the generation of NADPH supply necessary for the detoxification of the oxidant agents produced during the oxidative metabolic stress on erythrocytes. Due to the high prevalence of the deficiency of G6PD on world population, especially on Afro descents, many studies have been done trying

  2. Hydrogen absorption properties of U6Mn and U6Ni

    International Nuclear Information System (INIS)

    Ito, H.; Yamawaki, M.; Yamamoto, T.

    1998-01-01

    The hydrogen absorption properties of U, U 6 Mn and U 6 Ni were investigated at hydrogen pressures below 10 5 Pa. The pressure-composition (P-C) isotherms of U, U 6 Mn and U 6 Ni were obtained and the amounts of absorbed hydrogen for U, U 6 Mn and U 6 Ni were determined to be 3, 16.6 and 16.0 for x in MH x , where M is U, U 6 Mn and U 6 Ni, respectively. The desorption plateau pressures at 573 K decreased in the order: U 6 Mn-H>U 6 Ni-H>U-H. In addition, the results for the amounts of absorbed hydrogen suggests the formation of ternary hydrides U 6 MnH 18 and U 6 NiH 14 . (orig.)

  3. Utilization of Magnesium Hydroxide Produced by Magnesia Hydration as Fire Retardant for Nylon 6-6,6

    Directory of Open Access Journals (Sweden)

    Rocha Sônia D.F.

    2001-01-01

    Full Text Available The present work investigates the use of magnesium hydroxide, produced by magnesia hydration, as a fire retardant in polymers. The hydration was carried out in an autoclave, at temperature of 130°C for 1 hour, and the product was further submitted to cominution in a jet mill. The solids were characterized with regard to their chemical composition, particle size distribution, surface area and morphology. The performance evaluation of the hydroxide as a flame retardant for a copolymer of nylon 6-6,6 was carried out according to the UL94 specifications for vertical burning tests. V-0 flammability rating at 1.6 mm (60% magnesium hydroxide-filled nylon composite and at 3.2 mm (40% magnesium hydroxide filled nylon composite were achieved. Mechanical properties were maintained at the desired values. These results indicate that the hydroxide obtained from magnesia hydration can be successfully employed as a fire retardant for nylon 6-6,6.

  4. DUF6 Management

    Science.gov (United States)

    DUF6 Guide DU Uses DUF6 Management and Uses DUF6 Conversion EIS Documents News FAQs Internet Resources Glossary Home » DUF6 Management Depleted UF6 Management An introduction to DOE's Depleted UF6 Management Program. The mission of the DOE's Depleted UF6 Management Program is to safely and efficiently manage the

  5. Synthesis, structure and electronic configuration of [Rh{sub 6}Te{sub 8}(PPh{sub 3}){sub 6}].4C{sub 6}H{sub 6}

    Energy Technology Data Exchange (ETDEWEB)

    Thiele, Guenther; Balmer, Markus [Marburg Univ. (Germany). Fachbereich Chemie; Dehnen, Stefanie [Marburg Univ. (Germany). Fachbereich Chemie and Wissenschaftliches Zentrum fuer Materialwissenschaften

    2016-08-01

    [Rh{sub 6}Te{sub 8}(PPh{sub 3}){sub 6}].4C{sub 6}H{sub 6}, the first compound with a molecular Chevrel-type [Rh{sub 6}Te{sub 8}] cluster core has been synthesized and structurally characterized. By means of quantum chemical calculation, the close relationship of its electronic configuration to that of the lighter homologue has been demonstrated. The different crystal solvent content prevents an isostructural crystallization.

  6. 6-Peroxo-6-zirconium crown and its hafnium analogue embedded in a triangular polyanion: [M6(O2)6(OH)6(gamma-SiW10O36)3]18- (M = Zr, Hf).

    Science.gov (United States)

    Bassil, Bassem S; Mal, Sib Sankar; Dickman, Michael H; Kortz, Ulrich; Oelrich, Holger; Walder, Lorenz

    2008-05-28

    We have synthesized and structurally characterized the unprecedented peroxo-zirconium(IV) containing [Zr6(O2)6(OH)6(gamma-SiW10O36)3]18- (1). Polyanion 1 comprises a cyclic 6-peroxo-6-zirconium core stabilized by three decatungstosilicate units. We have also prepared the isostructural hafnium(IV) analogue [Hf6(O2)6(OH)6(gamma-SiW10O36)3]18- (2). We investigated the acid/base and redox properties of 1 by UV-vis spectroscopy and electrochemistry studies. Polyanion 1 represents the first structurally characterized Zr-peroxo POM with side-on, bridging peroxo units. The simple, one-pot synthesis of 1 and 2 involving dropwise addition of aqueous hydrogen peroxide could represent a general procedure for incorporating peroxo groups into a large variety of transition metal and lanthanide containing POMs.

  7. Mutagenic and Cytotoxic Properties of 6-Thioguanine, S6-Methylthioguanine, and Guanine-S6-sulfonic Acid*S⃞

    OpenAIRE

    Yuan, Bifeng; Wang, Yinsheng

    2008-01-01

    Thiopurine drugs, including 6-thioguanine (SG), 6-mercaptopurine, and azathioprine, are widely employed anticancer agents and immunosuppressants. The formation of SG nucleotides from the thiopurine prodrugs and their subsequent incorporation into nucleic acids are important for the drugs to exert their cytotoxic effects. SG in DNA can be methylated by S-adenosyl-l-methionine to give S6-methylthioguanine (S6mG) and oxidized by UVA light to render guanine-S6-sulfonic acid ...

  8. Radiation buildup and control in BWR recirculation piping

    International Nuclear Information System (INIS)

    Meyer, W.; Wood, R.M.; Rao, T.V.; Vook, R.W.

    1987-01-01

    Boiling water nuclear reactors (BWRs) employ stainless steel (Types 304 or 316 NG) pipes in which high-purity water at temperatures of ∼ 275 0 C are circulated. Various components of the system, such as valves and bearings, often contain hard facing metal alloys such as Stellite-6. These components, along with the stainless steel tubing and feedwater, serve as sources of 59 Co. This cobalt, along with other soluble and insoluble impurities, is carried along with the circulating water to the reactor core where it is converted to radioactive 60 Co. After reentering the circulating water, the 60 Co can be incorporated into a complex corrosion layer in the form of CoCr 2 O 4 and/or CoFe 2 O 4 . The presence of even small amounts of 60 Co on the walls of BWR cooling systems is the dominant contributor to inplant radiation levels. Thus BWR owners and their agents are expending significant time and resources in efforts to reduce both the rate and amount of 60 Co buildup. The object of this research is twofold: (a) to form a thin diffusion barrier against the outward migration of cobalt from a cobalt-containing surface and (b) to prevent the growth of a 60 Co-containing corrosion film. The latter goal was the more important since most of the radioactive cobalt will originate from sources other than the stainless steel piping itself

  9. Erosion resistance comparison of alternative surface treatments

    Science.gov (United States)

    Česánek, Z.; Schubert, J.; Houdková, Š.

    2017-05-01

    Erosion is a process characterized by the particle separation and the damage of component functional surfaces. Thermal spraying technology HP/HVOF (High Pressure / High Velocity Oxygen Fuel) is commonly used for protection of component surfaces against erosive wear. Alloy as well as cermet based coatings meet the requirements for high erosion resistance. Wear resistance is in many cases the determining property of required component functioning. The application suitability of coating materials is particularly influenced by different hardness. This paper therefore presents an erosion resistance comparison of alloy and cermet based coatings. The coatings were applied on steel substrates and were subjected to the erosive test using the device for evaluation of material erosion resistance working on the principle of centrifugal erodent flow. Abrasive sand Al2O3 with grain size 212-250 μm was selected as an erosive material. For this purpose, the specimens were prepared by thermal spraying technology HP/HVOF using commercially available powders Stellite 6, NiCrBSi, Cr3C2-25%NiCr, Cr3C2-25%CoNiCrAlY, Hastelloy C-276 and experimental coating TiMoCN-29% Ni. Erosion resistance of evaluated coatings was compared with erosive resistance of 1.4923 high alloyed steel without nitridation and in nitrided state and further with surface treatment using technology PVD. According to the evaluation, the resulting erosive resistance depends not only on the selected erodent and surface protection, but also on the erodent impact angle.

  10. VERTICAL ACCURACY COMPARISON OF DIGITAL ELEVATION MODEL FROM LIDAR AND MULTITEMPORAL SATELLITE IMAGERY

    Directory of Open Access Journals (Sweden)

    J. Octariady

    2017-05-01

    Full Text Available Digital elevation model serves to illustrate the appearance of the earth's surface. DEM can be produced from a wide variety of data sources including from radar data, LiDAR data, and stereo satellite imagery. Making the LiDAR DEM conducted using point cloud data from LiDAR sensor. Making a DEM from stereo satellite imagery can be done using same temporal or multitemporal stereo satellite imagery. How much the accuracy of DEM generated from multitemporal stereo stellite imagery and LiDAR data is not known with certainty. The study was conducted using LiDAR DEM data and multitemporal stereo satellite imagery DEM. Multitemporal stereo satellite imagery generated semi-automatically by using 3 scene stereo satellite imagery with acquisition 2013–2014. The high value given each of DEM serve as the basis for calculating high accuracy DEM respectively. The results showed the high value differences in the fraction of the meter between LiDAR DEM and multitemporal stereo satellite imagery DEM.

  11. Conclusion of the commission for determining wear out of Avala heavy water pump bearings - Annex 1; Prilog1 - Zakljucak komisije za utvrdjivanje istrosenosti lezista teskovodne pumpe Avala

    Energy Technology Data Exchange (ETDEWEB)

    Nikolic, M; Bratic, A; Zaric, Z; Vidmar, M; Kirilin, J [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

    1963-12-15

    After dismantling of the CEN-132 pump the findings of the Commission were: the wear-out of the surfaces of the pump bearings and one disc caused appearance of about 39 grams of cobalt in the heavy water system of the reactor. This report includes: results of chemical analysis of stellite taken form pump disc, results of measuring the wear-out of the upper pump bearing, drawing of the worn-out disc and upper cladding of the pump, and a photo of the upper surface of the disc. [Serbo-Croat] Posle demontaze pumpe CEN-132, pregleda detalja i izvrsenih merenja komisija je konstatovala da je zbog istrosenosti lezista diska pumpe i istrosenosti gornje caure u teskovodni sistem dospelo ukupno 39 grama kobalta. Ovaj dokument sadrzi i rezultate hemijske analize stelita skinutog sa diska pumpe, rezultate merenja istrosenosti gornjeg lezista teskovodne pumpe, crteze istrosnog diska skinutog sa pumpe, crteze gornje caure, fotografiju gornje povrsine diska.

  12. Diagnostic assays for active infection with human herpesvirus 6 (HHV-6).

    Science.gov (United States)

    Caserta, Mary T; Hall, Caroline Breese; Schnabel, Kenneth; Lofthus, Geraldine; Marino, Andrea; Shelley, Lynne; Yoo, Christina; Carnahan, Jennifer; Anderson, Linda; Wang, Hongyue

    2010-05-01

    Human herpesvirus 6 (HHV-6) causes ubiquitous infection in early childhood with lifelong latency or persistence. Reactivation of HHV-6 has been associated with multiple diseases including encephalitis. Chromosomal integration of HHV-6 also occurs. Previous studies have suggested that the detection of HHV-6 DNA in plasma is an accurate marker of active viral replication. We sought to determine whether PCR assays on plasma could correctly differentiate between primary HHV-6 infection, chromosomal integration of HHV-6 and latent HHV-6 infection. We performed qualitative PCR, real-time quantitative PCR (RQ-PCR), and reverse-transcriptase PCR (RT-PCR) assays on samples of peripheral and cord blood mononuclear cells, as well as plasma, from groups of subjects with well defined HHV-6 infection, including subjects with chromosomally integrated HHV-6. The detection of HHV-6 DNA in plasma was 92% sensitive compared to viral isolation for the identification of primary infection with HHV-6. All plasma samples from infants with chromosomally integrated HHV-6 had HHV-6 DNA detectable in plasma while only 5.6% were positive by RT-PCR. The specificity of plasma PCR for active replication of HHV-6 was 84% compared to viral culture while the specificity of RT-PCR was 98%. Our results demonstrate that qualitative or quantitative PCR of plasma is insufficient to distinguish between active viral replication and chromosomal integration with HHV-6. We found a higher specificity of RT-PCR performed on PBMC samples compared to PCR or RQ-PCR performed on plasma when evaluating samples for active HHV-6 replication. Copyright 2010 Elsevier B.V. All rights reserved.

  13. Mutagenic and cytotoxic properties of 6-thioguanine, S6-methylthioguanine, and guanine-S6-sulfonic acid.

    Science.gov (United States)

    Yuan, Bifeng; Wang, Yinsheng

    2008-08-29

    Thiopurine drugs, including 6-thioguanine ((S)G), 6-mercaptopurine, and azathioprine, are widely employed anticancer agents and immunosuppressants. The formation of (S)G nucleotides from the thiopurine prodrugs and their subsequent incorporation into nucleic acids are important for the drugs to exert their cytotoxic effects. (S)G in DNA can be methylated by S-adenosyl-l-methionine to give S(6)-methylthioguanine (S(6)mG) and oxidized by UVA light to render guanine-S(6)-sulfonic acid ((SO3H)G). Here, we constructed single-stranded M13 shuttle vectors carrying a (S)G, S(6)mG, or (SO3H)G at a unique site and allowed the vectors to propagate in wild-type and bypass polymerase-deficient Escherichia coli cells. Analysis of the replication products by using the competitive replication and adduct bypass and a slightly modified restriction enzyme digestion and post-labeling assays revealed that, although none of the three thionucleosides considerably blocked DNA replication in all transfected E. coli cells, both S(6)mG and (SO3H)G were highly mutagenic, which resulted in G-->A mutation at frequencies of 94 and 77%, respectively, in wild-type E. coli cells. Deficiency in bypass polymerases does not result in alteration of mutation frequencies of these two lesions. In contrast to what was found from previous steady-state kinetic analysis, our data demonstrated that 6-thioguanine is mutagenic, with G-->A transition occurring at a frequency of approximately 10%. The mutagenic properties of 6-thioguanine and its derivatives revealed in the present study offered important knowledge about the biological implications of these thionucleosides.

  14. Toxicological evaluation of 6'-sialyllactose (6'-SL) sodium salt.

    Science.gov (United States)

    Gurung, Rit Bahadur; Kim, Dae Hee; Kim, Lila; Lee, Albert W; Wang, Zhenhua; Gao, Yonglin

    2018-06-01

    We performed a series of toxicity studies on the safety of 6'-sialyllactose (6'-SL) sodium salt as a food ingredient. 6'-SL sodium salt, up to a maximum dose of 5000 μg/plate, did not increase the number of revertant colonies in five strains of Salmonella typhimurium in the presence or absence of S9 metabolic activation. A chromosomal aberration assay (using Chinese hamster lung cells) found no clastogenic effects at any concentration of 6'-SL sodium salt in the presence or absence of S9 metabolic activation. An in vivo bone marrow micronucleus test in Kunming mice showed no clastogenic activities with 6'-SL sodium salt doses up to 2000 mg/kg body weight (bw). In an acute toxicity study, the mean lethal dose of 6'-SL sodium salt was greater than 20 g/kg bw in rats. In a 13-week subchronic toxicity investigation, no effects were found at doses up to 5.0 g/kg bw of 6'-SL sodium salt in food consumption, body weight, clinical signs, blood biochemistry and hematology, urinalysis, or ophthalmic and histological macroscopic examination of organs. The no-observed-adverse-effect level (NOAEL) was 5.0 g/kg bw/day in rats. Copyright © 2018 Elsevier Inc. All rights reserved.

  15. Historieportal 3.-6. - historie3-6.gyldendal.dk

    DEFF Research Database (Denmark)

    Poulsen, Jens Aage

    Portal, der indeholder tekster, video, billeder, interaktive opgaver m.m. til undervisningen i historie i 3.-6. klasse......Portal, der indeholder tekster, video, billeder, interaktive opgaver m.m. til undervisningen i historie i 3.-6. klasse...

  16. IL-6-induced Bcl6 variant 2 supports IL-6-dependent myeloma cell proliferation and survival through STAT3

    International Nuclear Information System (INIS)

    Tsuyama, Naohiro; Danjoh, Inaho; Otsuyama, Ken-ichiro; Obata, Masanori; Tahara, Hidetoshi; Ohta, Tsutomu; Ishikawa, Hideaki

    2005-01-01

    IL-6 is a growth and survival factor for myeloma cells, although the mechanism by which it induces myeloma cell proliferation through gene expression is largely unknown. Microarray analysis showed that some B-cell lymphoma-associated oncogenes such as Bcl6, which is absent in normal plasma cells, were upregulated by IL-6 in IL-6-dependent myeloma cell lines. We found that Bcl6 variant 2 was upregulated by STAT3. ChIP assay and EMSA showed that STAT3 bound to the upstream region of variant 2 DNA. Expression of p53, a direct target gene of Bcl6, was downregulated in the IL-6-stimulated cells, and this process was impaired by an HDAC inhibitor. Bcl6 was knocked down by introducing small hairpin RNA, resulting in decreased proliferation and increased sensitivity to a DNA damaging agent. Thus, STAT3-inducible Bcl6 variant 2 appears to generate an important IL-6 signal that supports proliferation and survival of IL-6-dependent myeloma cells

  17. Glucose-6-Phosphate Dehydrogenase (G6PD) deficiency in patients ...

    African Journals Online (AJOL)

    This is a study of Glucose-6-phosphate dehydrogenase(G6PD) deficiency in sickle cell anaemia patients attending the haematology clinic of the Jos University Teaching Hospital (JUTH), Jos- Nigeria. The prevalence of G6PD deficiency among the 130 sickle cell anaemia patients studied was found to be 18.5%. G6PD ...

  18. Reinforcement of nylon 6,6/nylon 6,6 grafted nanodiamond composites by in situ reactive extrusion

    Science.gov (United States)

    Choi, Eun-Yeob; Kim, Kiho; Kim, Chang-Keun; Kang, Eunah

    2016-11-01

    Nanodiamond (ND), an emerging new carbon material, was exploited to reinforce nylon 6,6 (PA66) polymer composites. Surface modified nanodiamonds with acyl chloride end groups were employed to chemically graft into PA66, enhancing the interfacial adhesion and thus the mechanical properties. The ND grafted PA66 (PA66-g-ND) reinforced PA66 composite prepared by in situ reactive extrusion exhibited increased tensile strength and modulus. The tensile strength and modulus of PA66/3 wt.% PA66-g-ND composites were enhanced by 11.6 and 20.8%, respectively when compared to those of the bare PA66 matrix. Even the PA66/pristine ND composites exhibited enhanced mechanical properties. The PA66-g-ND and the homogeneously dispersed PA66-g-ND in PA66 matrix were examined using X-ray photoelectron spectroscopy, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy techniques. The mechanical properties and thermal conductivities of the nanodiamond incorporated PA66 composites were also explored. The enhanced mechanical properties and thermal conductivities of the PA66-g-ND/PA66 composites make them potential materials for new applications as functional engineered thermoplastics.

  19. Experiment data report for LOFT Boron dilution Experiment L6-6

    International Nuclear Information System (INIS)

    Stitt, B.D.; Divine, J.M.

    1982-06-01

    Selected pertinent and uninterpreted data from the sixth anticipated transient experiment (Experiment L6-6) conducted in the Loss-of-Fluid Test (LOFT) facility are presented. Experiment L6-6 simulated a boron dilution accident by injecting demineralized water into the primary coolant system (PCS) at a rate of 0.47 L/s while the reactor was in a cold shutdown condition with the control rods withdrawn. System pressure was maintained at approximately 285 kPa throughout the experiment. The experiment was divided into two parts. In the first part, L6-6A, a recirculation flow of 4.7 L/s was maintained through the PCS and criticality was achieved 7416 +- 10 s after the initiation of the dilution flow. The second part, L6-6B, was identical to L6-6A except that a recirculation flow of 9.5 L/s was maintained and criticality occurred at 8058 +- 10 s

  20. IPv6-protokolla

    OpenAIRE

    Hautanen, Jukka-Pekka

    2012-01-01

    Tämän työn tarkoituksena on tutkia IPv6-protokollaa ja IPv6-protokollan yhteensopivuutta IPv4-protokollan kanssa. Työn alussa tarkastellaan IPv6-protokollan historiaa ja tämän hetkistä levinneisyyttä. Työssä paneudutaan tarkemmin IPv6-protokollan pääpiirteisiin: IPv6-protokollan osoitetyypit ja niiden esitystavat, aliverkotus, IPv6-protokollan uudistetun otsikon rakenne ja uudet lisäotsikot. Edellä mainittuja pääpiirteitä verrataan tarvittaessa IPv4-protokollaan, jotta nähdään parannukset...

  1. Vitamin B6

    Science.gov (United States)

    ... Consumer Datos en español Health Professional Other Resources Vitamin B6 Fact Sheet for Consumers Have a question? ... out more about vitamin B6? Disclaimer What is vitamin B6 and what does it do? Vitamin B6 ...

  2. Ice Sheet Model Intercomparison Project (ISMIP6) Contribution to CMIP6

    Science.gov (United States)

    Nowicki, Sophie M. J.; Payne, Tony; Larour, Eric; Seroussi, Helene; Goelzer, Heiko; Lipscomb, William; Gregory, Jonathan; Abe-Ouchi, Ayako; Shepherd, Andrew

    2016-01-01

    Reducing the uncertainty in the past, present, and future contribution of ice sheets to sea-level change requires a coordinated effort between the climate and glaciology communities. The Ice Sheet Model Intercomparison Project for CMIP6 (ISMIP6) is the primary activity within the Coupled Model Intercomparison Project phase 6 (CMIP6) focusing on the Greenland and Antarctic ice sheets. In this paper, we describe the framework for ISMIP6 and its relationship with other activities within CMIP6. The ISMIP6 experimental design relies on CMIP6 climate models and includes, for the first time within CMIP, coupled ice-sheetclimate models as well as standalone ice-sheet models. To facilitate analysis of the multi-model ensemble and to generate a set of standard climate inputs for standalone ice-sheet models, ISMIP6 defines a protocol for all variables related to ice sheets. ISMIP6 will provide a basis for investigating the feedbacks, impacts, and sea-level changes associated with dynamic ice sheets and for quantifying the uncertainty in ice-sheet-sourced global sea-level change.

  3. Ice Sheet Model Intercomparison Project (ISMIP6) contribution to CMIP6

    Science.gov (United States)

    Nowicki, Sophie M.J.; Payne, Tony; Larour, Eric; Seroussi, Helene; Goelzer, Heiko; Lipscomb, William; Gregory, Jonathan; Abe-Ouchi, Ayako; Shepherd, Andrew

    2018-01-01

    Reducing the uncertainty in the past, present and future contribution of ice sheets to sea-level change requires a coordinated effort between the climate and glaciology communities. The Ice Sheet Model Intercomparison Project for CMIP6 (ISMIP6) is the primary activity within the Coupled Model Intercomparison Project – phase 6 (CMIP6) focusing on the Greenland and Antarctic Ice Sheets. In this paper, we describe the framework for ISMIP6 and its relationship to other activities within CMIP6. The ISMIP6 experimental design relies on CMIP6 climate models and includes, for the first time within CMIP, coupled ice sheet – climate models as well as standalone ice sheet models. To facilitate analysis of the multi-model ensemble and to generate a set of standard climate inputs for standalone ice sheet models, ISMIP6 defines a protocol for all variables related to ice sheets. ISMIP6 will provide a basis for investigating the feedbacks, impacts, and sea-level changes associated with dynamic ice sheets and for quantifying the uncertainty in ice-sheet-sourced global sea-level change. PMID:29697697

  4. Experimental and theoretical studies of the C{sub 6}H{sub 5} + C{sub 6}H{sub 6} reaction

    Energy Technology Data Exchange (ETDEWEB)

    Park, J.; Burova, S.; Rodgers, A.S.; Lin, M.C.

    1999-11-11

    The absolute rate constants for the C{sub 6}H{sub 5} + C{sub 6}H{sub 6} and C{sub 6}D{sub 6} reactions have been measured by cavity ringdown spectrometry at temperatures between 298 and 495 K at a constant 40 Torr Ar pressure. The new results, which reveal no detectable kinetic isotopic effect, can be represented by the Arrhenius equation, {kappa}{sub 1} = 10{sup (11.91{+-}0.13)} exp[{minus}(2,102 {+-} 106)/T] cm{sup 3}/(mol s). Low-temperature data for the addition/stabilization process, C{sub 6}H{sub 5} + C{sub 6}H{sub 6} {r{underscore}arrow} C{sub 12}H{sub 11}, can be correlated with those obtained in a low-pressure, high-temperature Knudsen cell study for the addition/displacement reaction, C{sub 6}H{sub 5} + C{sub 6}H{sub 6} {r{underscore}arrow} C{sub 12}H{sub 10} + H, by the RRKM theory using the molecular and transition-state parameters computed at the B3LYP/6-311G(d,p) level of theory. Combination of these two sets of data gives {kappa}{sub 1} = 10{sup (11.98{+-}0.03)} exp[{minus}(2168 {+-} 34)/T] cm{sup 3}/(mol s) covering the temperature range 298--1,330 K. The RRKM theory also correlates satisfactorily the forward reaction data with the high-temperature shock-tube result for the reverse H-for-C{sub 6}H{sub 5} substitution process with 2.7 and 4.7 kcal/mol barriers for the entrance (C{sub 6}H{sub 5} + C{sub 6}H{sub 6}) and reverse (H + C{sub 12}H{sub 10}) reactions, respectively. For modeling applications, the authors have calculated the forward reaction rate constants for the formation of the two competing products, H + C{sub 12}H{sub 10} and C{sub 12}H{sub 11}, at several pressures covering 300 K {lt} T {lt} 2,500 K.

  5. Enthalpies of formation of 5,6-dihydro-5-methyluracil and 5,6-dihydro-6-methyluracil

    International Nuclear Information System (INIS)

    Amaral, Luísa M.P.F.; Szterner, Piotr; Ribeiro da Silva, Manuel A.V.

    2013-01-01

    Highlights: • Δ c H m ° of two methyl-5,6-dihydrouracils have been determined by combustion calorimetry. • Vapor pressures were measured by the Knudsen effusion technique. • Gas phase enthalpies of formation of methyl-5,6-dihydrouracils, have been derived. -- Abstract: The standard (p° = 0.1 MPa) molar enthalpy of combustion, Δ c H m ° , of two crystalline compounds, 5,6-dihydro-5-methyluracil and 5,6-dihydro-6-methyluracil, were determined, at T = 298.15 K, using a static bomb combustion calorimeter. The vapor pressures as a function of the temperature were measured for those compounds, by the Knudsen effusion technique, and the standard molar enthalpies of sublimation at the mean temperature of the vapor pressure measurements were derived from the Clausius–Clapeyron equation, and corrected to T = 298.15 K using an estimated value for Δ cr g C p,m ° . These values were used to derive the standard molar enthalpies of formation of the two compounds studied, in the condensed and gaseous phases. Some considerations about the relative stability of the two isomers were made and compared with similar compounds

  6. IPv6 Security

    Science.gov (United States)

    Babik, M.; Chudoba, J.; Dewhurst, A.; Finnern, T.; Froy, T.; Grigoras, C.; Hafeez, K.; Hoeft, B.; Idiculla, T.; Kelsey, D. P.; López Muñoz, F.; Martelli, E.; Nandakumar, R.; Ohrenberg, K.; Prelz, F.; Rand, D.; Sciabà, A.; Tigerstedt, U.; Traynor, D.; Wartel, R.

    2017-10-01

    IPv4 network addresses are running out and the deployment of IPv6 networking in many places is now well underway. Following the work of the HEPiX IPv6 Working Group, a growing number of sites in the Worldwide Large Hadron Collider Computing Grid (WLCG) are deploying dual-stack IPv6/IPv4 services. The aim of this is to support the use of IPv6-only clients, i.e. worker nodes, virtual machines or containers. The IPv6 networking protocols while they do contain features aimed at improving security also bring new challenges for operational IT security. The lack of maturity of IPv6 implementations together with the increased complexity of some of the protocol standards raise many new issues for operational security teams. The HEPiX IPv6 Working Group is producing guidance on best practices in this area. This paper considers some of the security concerns for WLCG in an IPv6 world and presents the HEPiX IPv6 working group guidance for the system administrators who manage IT services on the WLCG distributed infrastructure, for their related site security and networking teams and for developers and software engineers working on WLCG applications.

  7. IPv6 Essentials

    CERN Document Server

    Hagen, Silvia

    2006-01-01

    IPv6 Essentials, Second Edition provides a succinct, in-depth tour of all the new features and functions in IPv6. It guides you through everything you need to know to get started, including how to configure IPv6 on hosts and routers and which applications currently support IPv6. Aimed at system and network administrators, engineers, network designers, and IT managers, this book will help you understand, plan for, design, and integrate IPv6 into your current IPv4 infrastructure

  8. LncMAPK6 drives MAPK6 expression and liver TIC self-renewal.

    Science.gov (United States)

    Huang, Guanqun; Jiang, Hui; He, Yueming; Lin, Ye; Xia, Wuzheng; Luo, Yuanwei; Liang, Min; Shi, Boyun; Zhou, Xinke; Jian, Zhixiang

    2018-05-15

    Liver tumor initiating cells (TICs) have self-renewal and differentiate capacities, and largely contribute to tumor initiation, metastasis and drug resistance. MAPK signaling is a critical pathway in many biological processes, while its role in liver TICs hasn't been explored. Online-available dataset was used for unbiased screening. Liver TICs were examined CD133 FACS or oncosphere formation. TIC self-renewal was detected by oncosphere formation and tumor initiation assay. LncRNA function was detected by loss of function or gain of function assays. The molecular mechanism of lncRNA was explored by RNA pulldown, RNA immunoprecipitation, ChIP, western blot and double FISH. Here, we examined the expression profiles of MAPK components (MAPKs, MAP2Ks, MAP3Ks, MAP4Ks), and found MAPK6 is most highly expressed in liver cancer samples. Moreover, a divergent lncRNA (long noncoding RNA) of MAPK6, termed lncMAPK6 here, is also overexpressed along with liver tumorigenesis. LncMAPK6 promotes liver tumor propagation and TIC self-renewal through MAPK6. LncMAPK6 interacts with and recruits RNA polymerase II to MAPK6 promoter, and finally activates the transcription of MAPK6. Through MAPK6 transcriptional regulation, lncMAPK6 drives MARK signaling activation. LncMAPK6-MAPK6 pathway can be used for liver TIC targeting. Altogether, lncMAPK6 promotes MARK signaling and the self-renewal of liver TICs through MAPK6 expression. MAPK6 was the most highly expressed MAPK component in liver cancer and liver TICs and lncMAPK6 participated in the transcriptional regulation of MAPK6in cis. This work revealed the importance role of MAPK signaling in liver TIC self-renewal and added a new layer for liver TIC and MAPK6 expression regulation.

  9. Interleukin-6 (IL-6) receptor/IL-6 fusion protein (Hyper IL-6) effects on the neonatal mouse brain: possible role for IL-6 trans-signaling in brain development and functional neurobehavioral outcomes.

    Science.gov (United States)

    Brunssen, Susan H; Moy, Sheryl S; Toews, Arrel D; McPherson, Christopher A; Harry, G Jean

    2013-01-01

    Adverse neurodevelopmental outcomes are linked to perinatal production of inflammatory mediators, including interleukin 6 (IL-6). While a pivotal role for maternal elevation in IL-6 has been established in determining neurobehavioral outcomes in the offspring and considered the primary target mediating the fetal inflammatory response, questions remain as to the specific actions of IL-6 on the developing brain. CD-1 male mice received a subdural injection of the bioactive fusion protein, hyper IL-6 (HIL-6) on postnatal-day (PND)4 and assessed from preweaning until adulthood. Immunohistochemical evaluation of astrocytes and microglia and mRNA levels for pro-inflammatory cytokines and host response genes indicated no evidence of an acute neuroinflammatory injury response. HIL-6 accelerated motor development and increased reactivity to stimulation and number of entries in a light/dark chamber, decreased ability to learn to withhold a response in passive avoidance, and effected deficits in social novelty behavior. No changes were observed in motor activity, pre-pulse startle inhibition, or learning and memory in the Morris water maze or radial arm maze, as have been reported for models of more severe developmental neuroinflammation. In young animals, mRNA levels for MBP and PLP/DM20 decreased and less complexity of MBP processes in the cortex was evident by immunohistochemistry. The non-hydroxy cerebroside fraction of cerebral lipids was increased. These results provide evidence for selective effects of IL-6 signaling, particularly trans-signaling, in the developing brain in the absence of a general neuroinflammatory response. These data contribute to our further understanding of the multiple aspects of IL-6 signaling in the developing brain. Published by Elsevier Inc.

  10. Lysine 356 is a critical residue for binding the C-6 phospho group of fructose 2,6-bisphosphate to the fructose-2,6-bisphosphatase domain of rat liver 6-phosphofructo-2-kinase/fructose-2,6-bisphosphatase.

    Science.gov (United States)

    Li, L; Lin, K; Correia, J J; Pilkis, S J

    1992-08-15

    Lysine 356 has been implicated by protein modification studies as a fructose-2,6-bisphosphate binding site residue in the 6-phosphofructo-2-kinase domain of rat liver 6-phosphofructo-2-kinase/fructose-2,6-bisphosphatase (Kitajima, S., Thomas, H., and Uyeda, K. (1985) J. Biol. Chem. 260, 13995-14002). However, Lys-356 is found in the fructose-2,6-bisphosphatase domain (Bazan, F., Fletterick, R., and Pilkis, S. J. (1989) Proc. Natl. Acad. Sci. U.S.A. 86, 9642-9646). In order to ascertain whether Lys-356 is involved in fructose-2,6-bisphosphatase catalysis and/or domain/domain interactions of the bifunctional enzyme, Lys-356 was mutated to Ala, expressed in Escherichia coli, and then purified to homogeneity. Circular dichroism experiments indicated that the secondary structure of the Lys-356-Ala mutant was not significantly different from that of the wild-type enzyme. The Km for fructose 2,6-bisphosphate and the Ki for the noncompetitive inhibitor, fructose 6-phosphate, for the fructose-2,6-bisphosphatase of the Lys-356-Ala mutant were 2700- and 2200-fold higher, respectively, than those of the wild-type enzyme. However, the maximal velocity and the Ki for the competitive product inhibitor, inorganic phosphate, were unchanged compared to the corresponding values of the wild-type enzyme. Furthermore, in contrast to the wild-type enzyme, which exhibits substrate inhibition, there was no inhibition by substrate of the Lys-356-Ala mutant. In the presence of saturating substrate, inorganic phosphate, which acts by relieving fructose-6-phosphate and substrate inhibition, is an activator of the bisphosphatase. The Ka for inorganic phosphate of the Lys-356-Ala mutant was 1300-fold higher than that of the wild-type enzyme. The kinetic properties of the 6-phosphofructo-2-kinase of the Lys-356-Ala mutant were essentially identical with that of the wild-type enzyme. The results demonstrate that: 1) Lys-356 is a critical residue in fructose-2,6-bisphosphatase for binding the 6

  11. TRPV6 channels.

    Science.gov (United States)

    Fecher-Trost, Claudia; Weissgerber, Petra; Wissenbach, Ulrich

    2014-01-01

    TRPV6 (former synonyms ECAC2, CaT1, CaT-like) displays several specific features which makes it unique among the members of the mammalian Trp gene family (1) TRPV6 (and its closest relative, TRPV5) are the only highly Ca(2+)-selective channels of the entire TRP superfamily (Peng et al. 1999; Wissenbach et al. 2001; Voets et al. 2004). (2) Translation of Trpv6 initiates at a non-AUG codon, at ACG, located upstream of the annotated AUG, which is not used for initiation (Fecher-Trost et al. 2013). The ACG codon is nevertheless decoded by methionine. Not only a very rare event in eukaryotic biology, the full-length TRPV6 protein existing in vivo comprises an amino terminus extended by 40 amino acid residues compared to the annotated truncated TRPV6 protein which has been used in most studies on TRPV6 channel activity so far. (In the following numbering occurs according to this full-length protein, with the numbers of the so far annotated truncated protein in brackets). (3) Only in humans a coupled polymorphism of Trpv6 exists causing three amino acid exchanges and resulting in an ancestral Trpv6 haplotype and a so-called derived Trpv6 haplotype (Wissenbach et al. 2001). The ancestral allele encodes the amino acid residues C197(157), M418(378) and M721(681) and the derived alleles R197(157), V418(378) and T721(681). The ancestral haplotype is found in all species, the derived Trpv6 haplotype has only been identified in humans, and its frequency increases with the distance to the African continent. Apparently the Trpv6 gene has been a strong target for selection in humans, and its derived variant is one of the few examples showing consistently differences to the orthologues genes of other primates (Akey et al. 2004, 2006; Stajich and Hahn 2005; Hughes et al. 2008). (4) The Trpv6 gene expression is significantly upregulated in several human malignancies including the most common cancers, prostate and breast cancer (Wissenbach et al. 2001; Zhuang et al. 2002; Fixemer et al

  12. Mol 7C/6; Mol 7C/6

    Energy Technology Data Exchange (ETDEWEB)

    Aberle, J.; Schleisiek, K.; Schmuck, I.; Schmidt, L.; Romer, O.; Weih, G.

    1995-08-01

    The Mol 7C/6 coolant blockage experiment in the Belgian BR2 reactor yielded results different from Mol 7C experiments with low burnup pins: At 10% burnup local failure is not self-limiting, but requires active systems for detection and scram. The Mol 7C series was finished in 1991. In each of the test bundles Mol 7C/4, /5 and /6, 30 Mk I pins pre-irradiated in KNK II were used. The central blockage consisted of enriched UO{sub 2} covering 30 percent of the bundle cross-section, with a height of 40 mm. The most important system for timely detection of coolant blockages of the type studied in Mol 7C/6 is based on DND. (orig.)

  13. POLYCYCLIC AROMATIC HYDROCARBONS WITH STRAIGHT EDGES AND THE 7.6/6.2 AND 8.6/6.2 INTENSITY RATIOS IN REFLECTION NEBULAE.

    Science.gov (United States)

    Ricca, Alessandra; Bauschlicher, Charles W; Roser, Joseph E; Peeters, Els

    2018-01-01

    We have investigated the mid-infrared spectral characteristics of a series of polycyclic aromatic hydrocarbons (PAHs) with straight edges and containing an even or odd number of carbons using density functional theory (DFT). For several even and odd-carbon PAHs, the 8.6/6.2 and 7.6/6.2 intensity ratios computed in emission after the absorption of a 8 eV photon match the observed ratios obtained for three reflection nebulae (RNe), namely NGC 1333, NGC 7023, and NGC 2023. Odd-carbon PAHs are favored, particularly for NGC 1333. Both cations and anions are present with the cations being predominant. Relevant PAHs span sizes ranging from 46 to 103-113 carbons for NGC 7023 and NGC 2023 and from 38 to 127 carbons for NGC 1333 and have symmetries ranging from D 2 h to C s . Our work suggests that even and odd-carbon PAHs with straight edges are viable candidates for the PAH emission seen towards irradiated Photo-Dissociation Regions (PDRs).

  14. Polycyclic Aromatic Hydrocarbons with Straight Edges and the 7.6/6.2 and 8.6/6.2 Intensity Ratios in Reflection Nebulae

    Science.gov (United States)

    Ricca, Alessandra; Bauschlicher, Charles W., Jr.; Roser, Joseph E.; Peeters, Els

    2018-02-01

    Using density functional theory, we have investigated the mid-infrared spectral characteristics of a series of polycyclic aromatic hydrocarbons (PAHs) that have straight edges and that contain an even or odd number of carbons. For several even and odd-carbon PAHs, the 8.6/6.2 and 7.6/6.2 intensity ratios computed in emission after the absorption of a 8 eV photon match the observed ratios obtained for three reflection nebulae (RNe), namely NGC 1333, NGC 7023, and NGC 2023. Odd-carbon PAHs are favored, particularly for NGC 1333. Both cations and anions are present, with the cations being predominant. Relevant PAHs span sizes ranging from 46 to 113 carbons for NGC 7023 and NGC 2023 and from 38 to 127 carbons for NGC 1333, and have symmetries ranging from D2h to C s . Our work suggests that even- and odd-carbon PAHs with straight edges are viable candidates for the PAH emission seen toward irradiated photodissociation regions.

  15. 6 sigma quality performance

    International Nuclear Information System (INIS)

    Yu, Yeong Hak

    2000-03-01

    This deals with 6 sigma quality performance introducing company which has 6 sigma quality management, 6 sigma quality activity and customer, secret of success of 6 sigma quality management, what 6 sigma is, 6 sigma quality management propel system 5 propel steps of project like point of 6 sigma, flow of problem solution, tool for propel of project, performance of CTQ and total customer satisfaction, and quality management system and 6 sigma quality.

  16. Summary of the 10th International Conference on Human Herpesviruses-6 and -7 (HHV-6A, -6B, and HHV-7).

    Science.gov (United States)

    Komaroff, Anthony L; Boeckh, Michael; Eliason, Eva; Phan, Tuan; Kaufer, Benedikt B

    2018-04-01

    The 10th International Conference on Human herpesviruses-6 and -7 (HHV-6A, HHV-6B, and HHV-7) was held at the Freie Universität, Berlin, Germany from July 23-26, 2017. It attracted more than 130 basic, translational and clinical scientists from 19 countries. Important new information was presented regarding: the biology of HHV-6A and -6B; the biology and epidemiology of inherited chromosomally integrated HHV-6A and -6B; improved diagnostic tests; animal models for and animal viruses with similarities to HHV-6A, -6B, and -7; established and possible disease associations; and new treatment strategies. Here, we summarize work presented at the meeting that is of particular interest. © 2017 Wiley Periodicals, Inc.

  17. Micro-nano hierarchically structured nylon 6,6 surfaces with unique wettability.

    Science.gov (United States)

    Zhang, Liang; Zhang, Xiaoyan; Dai, Zhen; Wu, Junjie; Zhao, Ning; Xu, Jian

    2010-05-01

    A micro-nano hierarchically structured nylon 6,6 surface was easily fabricated by phase separation. Nylon 6,6 plate was swelled by formic acid and then immersed in a coagulate bath to precipitate. Micro particles with nano protrusions were generated and linked together covering over the surface. After dried up, the as-formed surface showed superhydrophilic ability. Inspired by lotus only employing 2-tier structure and ordinary plant wax to maintain superhydrophobicity, paraffin wax, a low surface energy material, was used to modify the hierarchically structured nylon 6,6 surface. The resultant surface had water contact angle (CA) of 155.2+/-1.3 degrees and a low sliding angle. The whole process was carried on under ambient condition and only need a few minutes. Copyright 2010 Elsevier Inc. All rights reserved.

  18. Tinjauan Teologis: Allah Menyesal Berdasarkan Perspektif Kitab Kejadian Pasal 6:6-7

    Directory of Open Access Journals (Sweden)

    Yetris Elbaar

    2013-10-01

    Full Text Available Tujuan penelitian ini adalah Pertama, untuk menjelaskan makna Allahmenyesal melalui pemaparan eksposisi nas di dalam kitab Kejadian 6:6-7, supayadapat menghasilkan kerangka pemahaman yang benar tentang Allah sebagaiPencipta. Kedua, untuk mendapatkan pemahaman yang benar mengenai Allahmenyesal berdasarkan penjelasan implikasi teologis. Ketiga, supaya orang percayadapat mengerti makna mengenai Allah menyesal dalam kitab Kejadian 6:6-7 yangdijabarkan dalam implikasi praktis.Penulisan karya ilmiah ini menggunakan metodologi eksposisi, denganmenggunakan prinsip-prinsip hermeneutika, yaitu dengan kajian eksegesis Alkitabmengenai Allah menyesal berdasarkan Kejadian 6:6-7 dan melalui penelitiankualitatif, yaitu dengan penggunaan buku-buku di perpustakaan yang berkaitandengan konsep judul karya ilmiah.Kesimpulan karya ilmiah ini adalah: Pertama, Allah yang menyesal adalahAllah yang konsisten terhadap sifat dan karakter-Nya. Kedua, Allah yang menyesaladalah Allah yang harus dipahami melalui konteks firman Tuhan. Berdasarkankonteks Kejadian 6:6-7 Allah menyesal adalah Allah yang menyatakan pengakuan-Nya sebagai pencipta (6:6. Dan Mengungkapkan keputusan Allah (6:7. Ketiga,Allah menyesal adalah Allah yang tidak dapat menyangkal diri-Nya sebagai Allahyang ingin menyatakan bahwa Ia sangat berduka, tetapi harus menyatakankeadilannya sebagai Allah dan harus menghukum kejahatan manusia. Keempat,Allah menyesal adalah Allah yang menghendaki supaya manusia hidup dalamperaturan dan hukum-hukum yang Allah tetapkan dalam kehidupannya.

  19. Standard Missile-6 (SM-6)

    Science.gov (United States)

    2016-12-01

    attack or Anti-Ship Cruise Missiles in flight. The SM-6 ERAM program is an evolutionary, capabilities based acquisition program that will use spiral ...Prior SAR Total O&S Estimates - Dec 2014 SAR 460.3 Programmatic/Planning Factors 0.0 Cost Estimating Methodology 0.0 Cost Data Update 0.0 Labor Rate

  20. Magnetic properties and Hall effect of single-crystalline YMn6Sn6

    International Nuclear Information System (INIS)

    Uhlirova, K.; Sechovsky, V.; Boer, F.R. de; Yoshii, S.; Yamamoto, T.; Hagiwara, M.; Lefevre, C.; Venturini, G.

    2007-01-01

    Magnetization behavior and Hall resistivity of YMn 6 Sn 6 , which crystallizes in the hexagonal HfFe 6 Ge 6 -type of structure, have been investigated on single crystals at various temperatures in the ordered magnetic state. The field dependence of the Hall resistivity shows anomalies, which are related to the field-induced spin reorientations occurring in YMn 6 Sn 6 . It is also found that the Hall resistivity cannot simply be described by the anomalous contribution proportional to the magnetization, but that an additional field-dependent contribution is present

  1. Transplacental Human Herpesvirus 6 (HHV-6) Congenital Infection Caused by Maternal Chromosomally Integrated Virus

    Science.gov (United States)

    Hall, Caroline Breese; Caserta, Mary T.; Schnabel, Kenneth C.; Shelley, Lynne M.; Carnahan, Jennifer A.; Marino, Andrea S.; Yoo, Christina; Lofthus, Geraldine K.

    2009-01-01

    Congenital HHV-6 infection results from germline passage of chromosomally-integrated HHV-6 (CI-HHV-6) and from transplacental passage of maternal HHV-6 infection (TP-HHV-6). We aimed to determine if CI-HHV-6 could replicate and cause TP-HHV-6 infection. HHV-6 DNA, variant type, and viral loads were determined on samples (cord blood, peripheral blood, saliva, urine, hair) from 6 infants with TP-HHV-6 and on their parents’ hair. No fathers, but all mothers of TP-HHV-6 infants had CI-HHV-6, and the mother's CI-HHV-6 variant was the same variant causing the TP-HHV-6 congenital infection. This suggests the possibility that CI-HHV-6 replicates, and may cause most, possibly all, congenital HHV-6 infections. PMID:20088693

  2. New C$_{6}$D$_{6}$ detectors: reduced neutron sensitivity and improved safety

    CERN Document Server

    Mastinu, Pierfrancesco; Berthoumieux, Eric; Cano-Ott, Daniel; Gramegna, F; Guerrero, Carlos; Massimi, Cristian; Milazzo, Paolo Maria; Mingrone, Federica; Praena, Javier; Prete, G; García, Aczel Regino

    2013-01-01

    During the 2011 data measurement campaign at n_TOF, the liquid scintillator detectors developed at FZK-Karlsruhe (hereafter named K6D6, [1]) and used with success along 10 years have shown ageing problems, mainly related to liquid leakage. The mould used to produce the carbon fiber structure, containing the liquid and the detection elements, was not available anymore and the technician involved in its construction was retired. Once decided to proceed to the production of new detectors (L6D6 in the following) two major items have been identified: - The detector setup must be able to work in the new class A experimental area (safety requirements advise to avoid the use of the old K6D6 in this area). - If possible, it is useful to reduce the neutron sensitivity, with the aim to have a liquid scintillator detector with very low neutron sensitivity (improving the already high performing K6D6). [1] R.Plag et al., NIM A496 (2003) 425

  3. Neutron diffraction studies on GdB6 and TbB6 powders

    International Nuclear Information System (INIS)

    Luca, S.E.; Amara, M.; Galera, R.M.; Givord, F.; Granovsky, S.; Isnard, O.; Beneu, B.

    2004-01-01

    We report here the first powder neutron diffraction study of GdB 6 and TbB 6 . GdB 6 and TbB 6 order antiferromagnetically at 15 and 21 K, respectively. In both compounds the transition at T N is of the first order. Moreover GdB 6 presents a second spontaneous magnetic transition at T * =8 K. The present study shows that, in both compounds, the magnetic propagation vectors belong to the star and that the direction of the magnetic moment is perpendicular to the ((1)/(2)) component of the wave-vector in GdB 6 , while in TbB 6 the moment is parallel to it. The deduced low-temperature values of the magnetic moments agree with those of the respective rare-earth trivalent ions

  4. Bromine-rich Zinc Bromides: Zn6Br12(18-crown-6)2×(Br2)5, Zn4Br8(18-crown-6)2×(Br2)3, and Zn6Br12(18-crown-6)2×(Br2)2.

    Science.gov (United States)

    Hausmann, David; Feldmann, Claus

    2016-06-20

    The bromine-rich zinc bromides Zn6Br12(18-crown-6)2×(Br2)5 (1), Zn4Br8(18-crown-6)2×(Br2)3 (2), and Zn6Br12(18-crown-6)2×(Br2)2 (3) are prepared by reaction of ZnBr2, 18-crown-6, and elemental bromine in the ionic liquid [MeBu3N][N(Tf)2] (N(Tf)2 = bis(trifluoromethylsulfonyl)amide). Zn6Br12(18-crown-6)2×(Br2)5 (1) is formed instantaneously by the reaction. Even at room temperature, compound 1 releases bromine, which was confirmed by thermogravimetry (TG) and mass spectrometry (MS). The release of Br2 can also be directly followed by the color and density of the title compounds. With controlled conditions (2 weeks, 25 °C, absence of excess Br2) Zn6Br12(18-crown-6)2×(Br2)5 (1) slowly releases bromine with conconcurrent generation of Zn4Br8(18-crown-6)2×(Br2)3 (2) (in ionic liquid) and Zn6Br12(18-crown-6)2×(Br2)2 (3) (in inert oil). All bromine-rich zinc bromides contain voluminous uncharged (e.g., Zn3Br6(18-crown-6), Zn2Br4(18-crown-6)) or ionic (e.g., [Zn2Br3(18-crown-6)](+), [(Zn2Br6)×(Br2)2](2-)) building units with dibromine molecules between the Zn oligomers and partially interconnecting the Zn-containing building units. Due to the structural similarity, the bromine release is possible via crystal-to-crystal transformation with retention of the crystal shape.

  5. Stability of [6]-gingerol and [6]-shogaol in simulated gastric and intestinal fluids.

    Science.gov (United States)

    Bhattarai, Sushila; Tran, Van H; Duke, Colin C

    2007-11-30

    The degradation kinetics of [6]-gingerol and [6]-shogaol were investigated in simulated gastric (pH 1) and intestinal (pH 7.4) fluids at 37 degrees C. Degradation products were quantitatively determined by HPLC (Lichrospher 60 RP select B column, 5 microm, 125 mm x 4 mm; mobile phase: methanol-water-acetic acid (60:39:1 v/v); flow rate: 0.6 ml/min; detection UV: 280 nm). In simulated gastric fluid (SGF) [6]-gingerol and [6]-shogaol underwent first-order reversible dehydration and hydration reactions to form [6]-shogaol and [6]-gingerol, respectively. The degradation was catalyzed by hydrogen ions and reached equilibrium at approximately 200 h. In simulated intestinal fluid (SIF) both [6]-gingerol and [6]-shogaol showed insignificant interconversion between one another. Addition of amino acids glycine, 3-amino propionic acid (beta-alanine) and gamma-amino butyric acid (GABA), and ammonium acetate at a range of concentrations of 0.05-0.5mM had no effect on the rate of degradation of [6]-shogaol in SGF and 0.1M HCl solution. However, at exceedingly high concentration (0.5M) of ammonium acetate and glycine, significant amounts of [6]-shogaol ammonia and glycine adducts were detected. The degradation profile of [6]-gingerol and [6]-shogaol under simulated physiological conditions reported in this study will provide insight into the stability of these compounds when administered orally.

  6. Dielectric properties for SF6 and SF6 mixtures predicted from basic data

    International Nuclear Information System (INIS)

    Kline, L.E.; Davies, D.K.; Chen, C.L.; Chantry, P.J.

    1979-01-01

    We have calculated α and eta, the ionization and attachment coefficients, and (E/N) *, the limiting breakdown electric-field--to--gas-density ratio, in SF 6 and SF 6 mixtures by numerically solving the Boltzmann equation for the electron energy distribution. The calculations require a knowledge of several electron collision cross sections. Published momentum transfer and ionization cross sections for SF 6 were used. We measured various attachment cross sections for SF 6 using electron-beam techniques with mass spectrometric ion detection. We determined a total cross section for electronic excitation of SF 6 by comparing the predicted values of α, eta, and (E/N) * with our measured values obtained from spatial current growth experiments in SF 6 in uniform fields over an extended range of E/N. With this self-consistent set of SF 6 cross sections, together with published He and N 2 cross sections, it was then possible to predict the dielectric properties of SF 6 -He and SF 6 -N 2 mixtures. Published experimental values of α for the SF 6 -He mixtures lie between the values of α calculated with and without ionization of SF 6 by excited He atoms. Published experimental values of (E/N) * agree with our calculations to within 5% in both the SF 6 -He and the SF 6 -N 2 mixtures

  7. WLCG and IPv6 - the HEPiX IPv6 working group

    Science.gov (United States)

    Campana, S.; Chadwick, K.; Chen, G.; Chudoba, J.; Clarke, P.; Eliáš, M.; Elwell, A.; Fayer, S.; Finnern, T.; Goossens, L.; Grigoras, C.; Hoeft, B.; Kelsey, D. P.; Kouba, T.; López Muñoz, F.; Martelli, E.; Mitchell, M.; Nairz, A.; Ohrenberg, K.; Pfeiffer, A.; Prelz, F.; Qi, F.; Rand, D.; Reale, M.; Rozsa, S.; Sciaba, A.; Voicu, R.; Walker, C. J.; Wildish, T.

    2014-06-01

    The HEPiX (http://www.hepix.org) IPv6 Working Group has been investigating the many issues which feed into the decision on the timetable for the use of IPv6 (http://www.ietf.org/rfc/rfc2460.txt) networking protocols in High Energy Physics (HEP) Computing, in particular in the Worldwide Large Hadron Collider (LHC) Computing Grid (WLCG). RIPE NCC, the European Regional Internet Registry (RIR), ran out ofIPv4 addresses in September 2012. The North and South America RIRs are expected to run out soon. In recent months it has become more clear that some WLCG sites, including CERN, are running short of IPv4 address space, now without the possibility of applying for more. This has increased the urgency for the switch-on of dual-stack IPv4/IPv6 on all outward facing WLCG services to allow for the eventual support of IPv6-only clients. The activities of the group include the analysis and testing of the readiness for IPv6 and the performance of many required components, including the applications, middleware, management and monitoring tools essential for HEP computing. Many WLCG Tier 1/2 sites are participants in the group's distributed IPv6 testbed and the major LHC experiment collaborations are engaged in the testing. We are constructing a group web/wiki which will contain useful information on the IPv6 readiness of the various software components and a knowledge base (http://hepix-ipv6.web.cern.ch/knowledge-base). This paper describes the work done by the working group and its future plans.

  8. 6-Bromocholesterol derivatives

    International Nuclear Information System (INIS)

    Flanagan, R.J.

    1984-01-01

    Novel 6-bromo derivatives of cholesterol have the formula 3-(R-O-),6-BR,17-((H3C-)2-HC-H2C-H2C-H2C-HC(-CH3)-)-ESTR-5-ENE Such compounds are prepared from the known 6-iodocholesterol by treatment with cuprous bromide. These compounds, labelled with radioisotopes of Br-82 or Br-77, are localized in the adrenal, mammary and ovary tissue of female mammals and in the adrenal or prostate tissue of males when administered to such individuals. This provides a method for imaging adrenal, ovary or prostate tissue which is superior to use of the prior art 6-iodo-cholesterol

  9. Growth Arrest-Specific 6 (Gas6) and TAM Receptors in Mouse Platelets.

    Science.gov (United States)

    Uras, Fikriye; Küçük, Burhanettin; Bingöl Özakpınar, Özlem; Demir, Ahmet Muzaffer

    2015-03-05

    Growth arrest-specific 6 (Gas6) is a newly discovered vitamin K-dependent protein, which is a ligand for TAM receptors [Tyro3 (Sky), Axl, and Mer] from the tyrosine kinase family. Gas6 knockout mice were resistant to venous and arterial thrombosis. There are contradictory reports on the presence of Gas6 and its receptors in mouse platelets. The objective of this study was to investigate whether Gas6 and its receptors were present in mouse platelets or not. Specific pathogen-free BALB/c male and female mice of 8-10 weeks old and 25-30 g in weight were anesthetized under light ether anesthesia and blood samples were taken from their hearts. RNAs were isolated from isolated platelets, and then mRNAs encoding Gas6 and TAM receptors were detected by reverse transcription-polymerase chain reaction (RT-PCR). Protein concentrations of Gas6 and TAM receptors in platelets were measured by ELISA, but not those of Mer, because of the absence of any commercial ELISA kit for mouse specimens. RT-PCR results indicated the presence of mRNAs encoding Gas6 and Mer in mouse platelets. However, although RT-PCR reactions were performed at various temperatures and cycles, we could not detect the presence of mRNAs encoding Axl and Tyro3 (Sky). Receptor protein levels of Axl and Tyro3 were below the detection limits of the ELISA method. We found the presence of mRNAs encoding Gas6 and the receptor Mer in mouse platelets, but not Axl and Tyro3. Gas6, Axl, and Tyro3 protein levels were below the detection limits of the ELISA. The presence of mRNA is not obvious evidence of protein expression in platelets that have no nucleus or DNA. Further studies are required to clarify the presence of Gas6/TAM receptors in platelets using real-time PCR and more sensitive immunological methods, and future studies on mechanisms will indicate whether the Gas6/TAM pathway is a strategy for treatment of disorders.

  10. Interleukin-6 receptor expression in contracting human skeletal muscle: regulating role of IL-6

    DEFF Research Database (Denmark)

    Keller, Pernille; Penkowa, Milena; Keller, Charlotte

    2005-01-01

    Contracting muscle fibers produce and release IL-6, and plasma levels of this cytokine are markedly elevated in response to physical exercise. We recently showed autocrine regulation of IL-6 in human skeletal muscle in vivo and hypothesized that this may involve up-regulation of the IL-6 receptor....... Infusion of rhIL-6 to humans had no effect on the mRNA level of the IL-6 receptor, whereas there was an increase at the protein level. IL-6 receptor mRNA increased similarly in muscle of both IL-6 KO mice and wild-type mice in response to exercise. In conclusion, exercise increases IL-6 receptor production....... Therefore, we investigated IL-6 receptor regulation in response to exercise and IL-6 infusion in humans. Furthermore, using IL-6-deficient mice, we investigated the role of IL-6 in the IL-6 receptor response to exercise. Human skeletal muscle biopsies were obtained in relation to: 3 h of bicycle exercise...

  11. C_6_0"3"- versus C_6_0"4"- /C_6_0"2"- - synthesis and characterization of five salts containing discrete fullerene anions

    International Nuclear Information System (INIS)

    Boeddinghaus, M. Bele; Klein, Wilhelm; Wahl, Bernhard; Faessler, Thomas F.; Jakes, Peter; Eichel, Ruediger A.

    2014-01-01

    Five new compounds, [Rb(18crown-6)]_3[C_6_0] (1), [Rb(18crown-6)]_6[C_6_0]_2(C_3H_7NO)_2(C_4H_8O)_2 (2), [Rb(benzo18crown-6)]_6[C_6_0]_2(C_2H_8N_2)_5 (3), [Cs(benzo18crown-6)]_3C_6_0(C_2H_8N_2)_2 (4), and [Cs_3(benzo18crown-6)_5]C_6_0(C_2H_8N_2)_(_4_._5_+_x_) (5) were synthesized and characterized by single-crystal X-ray structure determination. All compounds contain discrete C_6_0 anions, which are ordered in 1, 2, and 4, where direct cation-anion contacts occur. The unit cells of 1 and 2 contain two independent fullerides, which coordinate to the rubidium atoms either of two or of four [Rb(18crown-6)] units. Owing to the presence of differently coordinated fullerene units in compounds 1 and 2, a possible disproportionation of C_6_0"3"- into C_6_0"2"- and C_6_0"4"- anions is discussed. In 3 and 4 the C_6_0 anions are coordinated by three Rb and Cs atoms, respectively. In all compounds the average charge of the anion is -3. Magnetic data reveal a doublet spin state for 3. The EPR spectra are discussed for compounds 3 and 5. The role of a dynamic Jahn-Teller distortion is discussed, and we report the first IR spectroscopic data of fullerene trianions, which have been obtained in solution. (Copyright copyright 2014 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  12. Association of papillomavirus E6 proteins with either MAML1 or E6AP clusters E6 proteins by structure, function, and evolutionary relatedness.

    Directory of Open Access Journals (Sweden)

    Nicole Brimer

    2017-12-01

    Full Text Available Papillomavirus E6 proteins bind to LXXLL peptide motifs displayed on targeted cellular proteins. Alpha genus HPV E6 proteins associate with the cellular ubiquitin ligase E6AP (UBE3A, by binding to an LXXLL peptide (ELTLQELLGEE displayed by E6AP, thereby stimulating E6AP ubiquitin ligase activity. Beta, Gamma, and Delta genera E6 proteins bind a similar LXXLL peptide (WMSDLDDLLGS on the cellular transcriptional co-activator MAML1 and thereby repress Notch signaling. We expressed 45 different animal and human E6 proteins from diverse papillomavirus genera to ascertain the overall preference of E6 proteins for E6AP or MAML1. E6 proteins from all HPV genera except Alpha preferentially interacted with MAML1 over E6AP. Among animal papillomaviruses, E6 proteins from certain ungulate (SsPV1 from pigs and cetacean (porpoises and dolphins hosts functionally resembled Alpha genus HPV by binding and targeting the degradation of E6AP. Beta genus HPV E6 proteins functionally clustered with Delta, Pi, Tau, Gamma, Chi, Mu, Lambda, Iota, Dyokappa, Rho, and Dyolambda E6 proteins to bind and repress MAML1. None of the tested E6 proteins physically and functionally interacted with both MAML1 and E6AP, indicating an evolutionary split. Further, interaction of an E6 protein was insufficient to activate degradation of E6AP, indicating that E6 proteins that target E6AP co-evolved to separately acquire both binding and triggering of ubiquitin ligase activation. E6 proteins with similar biological function clustered together in phylogenetic trees and shared structural features. This suggests that the divergence of E6 proteins from either MAML1 or E6AP binding preference is a major event in papillomavirus evolution.

  13. The point of 6 sigma

    International Nuclear Information System (INIS)

    An, Yeong Jin

    2000-07-01

    This book gives descriptions of the point of 6 sigma. These are the titles of this : what 6 sigma is, sigma conception, motor roller 3.4 ppm, centering error, 6 sigma purpose, 6 sigma principle, eight steps of innovation strategy, 6 sigma innovation strategy of easy system step, measurement standard of 6 sigma outcome, the main role of 6 sigma, acknowledgment and reword, 6 sigma characteristic, 6 sigma effect, 6 sigma application and problems which happen when 6 sigma introduces.

  14. Integration of FMIPv6 in HMIPv6 to Improve Hand-over Performance

    Science.gov (United States)

    Patil, Dipali P.; Patil, G. A.

    2010-11-01

    Mobile users move frequently between networks, as they stay connected to the Internet. Thus, as mobility increases across networks, handovers will significantly impact the quality of the connection and user application. Handover performance is very important when evaluating IP mobility protocols. Since handover request are driven by several needs such as cost reduction criteria, network resource optimization and service related requirements. Current works to support seamless mobility in IPv6 network are classified into HMIPv6 and FMIPv6. These two approaches have pros and cons respectively and are being standardized independently in IETF. If one can integrate properly these two approaches, it is expected that the one can get more effective protocols that can provide better handover performance. This paper integrates FHMIPv6 in HMIPv6 (F-HMIPv6) so as to provide effectively fast handover on the hierarchical Mobile IPv6. The simulation performed using Ns-2 extensions to show that a performance of proposed system is better in terms of packet loss and hand-over delay.

  15. Engineer, design construct, test, and evaluate a pressurized fluidized-bed pilot plant using high-sulfur coal for production of electric power: Phase I. Preliminary engineering; Phase II. Final design; Phase III. Construction. Annual report, March 1, 1979-February 29, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The extended test program on the SGT/PFB Technology Unit, previously placed in operation, was completed. Total operating time is 3378 which includes 2681 h burning coal and 1205 h total turbine engine operation. Significant performance and operational milestones, completed during the past year, included: over 2000 h on candidate heat exchanger tube materials at design temperature during which durability of iron-base alloy for PFB heat exchanger tubes was demonstrated; generated electric power with gas turbine operating on PFB coal combustion gas for 1000 h with no appreciable erosion or corrosion of turbine rotor blades and stator vanes; evaluated and improved hot gas cleanup system during which mean particle size of 1.3 Microns and a loading of 0.054 grains/Scf was achieved; and durability of hot/ash solids lock hopper valves for over 1000 h without leakage and stellite coated butterfly gas valve operating successfully for over 900 h in a highly erosive environment was demonstrated. Details of materials evolutions and corrosion rates, component performances and gaseous emission levels are presented.

  16. Canned motor pumps at Heavy Water Project, Baroda [Paper No.: II-2

    International Nuclear Information System (INIS)

    Batra, R.K.; Waishampayan, S.G.

    1981-01-01

    Heavy Water Project, Baroda is having special canned motor pumps for pumping ammonia and potassium amide. These pumps work under a pressure of 640 kg/cm 2 and are lubricated and cooled by the same fluid. These pumps are having special bearings consisting of mating surfaces of tungsten carbine Vs ceramic or stellite Vs carbon depending upon application. The total number of such pumps installed in the plant is around 52. These pumps being installed in high pressure vessels working at a pressure of 640 kg/cm 2 have special maintenance problems and need special care during maintenance. Pumps once boxed up are completely out of reach for immediate maintenance if needed. The failure of these pumps may mean a down time of one to two months for the plant. Besides above, there are multistage barrel type ammonia pumps with 24 stages developing a pressure of 140 kg/cm 2 . All these equipments need special maintenance methods as the problems faced are varied and difficult to solve. This paper deals with general and unique type of problems faced on these pumps. (author)

  17. Preparation of compounds AWCl6 from WCl6 in Cl--containing solvents

    International Nuclear Information System (INIS)

    Seifert, H.J.; Kiewisch, B.; Wuesteneck, A.

    1977-01-01

    In Glyme, ACN or CH 2 Cl 2 WCl 6 is reduced by Cl - to WCl 6 - . From those solutions compounds AWCl 6 can be isolated with A = Cs (Glyme, ACN), A = Rb, K, NH 4 (ACN) and A = N(C 2 H 5 ) 4 (CH 2 Cl 2 ). By concentrating of glyme-solutions a precipitate of A 2 WCl 6 is formed by disproportionation. In methanol/HCl also solvolysis to oxo-compounds of W 6+ takes place as function of the H + -concentration. With N(C 2 H 5 ) 4 Cl not only chlorotungstates but also methoxy- and oxo-spezies of W 5+ can be isolated. (author)

  18. Inhibitory potency of 8-methoxypsoralen on cytochrome P450 2A6 (CYP2A6 allelic variants CYP2A6 15, CYP2A6 16, CYP2A6 21 and CYP2A6 22: differential susceptibility due to different sequence locations of the mutations.

    Directory of Open Access Journals (Sweden)

    Kai Hung Tiong

    Full Text Available Human cytochrome P450 2A6 (CYP2A6 is a highly polymorphic isoform of CYP2A subfamily. Our previous kinetic study on four CYP2A6 allelic variants (CYP2A6 15, CYP2A6 16, CYP2A6 21 and CYP2A6 22 have unveiled the functional significance of sequence mutations in these variants on coumarin 7-hydroxylation activity. In the present study, we further explored the ability of a typical CYP2A6 inhibitor, 8-methoxypsoralen (8-MOP, in inhibition of these alleles and we hypothesized that translational mutations in these variants are likely to give impact on 8-MOP inhibitory potency. The CYP2A6 variant and the wild type proteins were subjected to 8-MOP inhibition to yield IC50 values. In general, a similar trend of change in the IC50 and Km values was noted among the four mutants towards coumarin oxidation. With the exception of CYP2A6 16, differences in IC50 values were highly significant which implied compromised interaction of the mutants with 8-MOP. Molecular models of CYP2A6 were subsequently constructed and ligand-docking experiments were performed to rationalize experimental data. Our docking study has shown that mutations have induced enlargement of the active site volume in all mutants with the exception of CYP2A6 16. Furthermore, loss of hydrogen bond between 8-MOP and active site residue Asn297 was evidenced in all mutants. Our data indicate that the structural changes elicited by the sequence mutations could affect 8-MOP binding to yield differential enzymatic activities in the mutant CYP2A6 proteins.

  19. Crystal structures of bis- and hexakis[(6,6′-dihydroxybipyridinecopper(II] nitrate coordination complexes

    Directory of Open Access Journals (Sweden)

    Deidra L. Gerlach

    2015-12-01

    Full Text Available Two multinuclear complexes synthesized from Cu(NO32 and 6,6′-dihydroxybipyridine (dhbp exhibit bridging nitrate and hydroxide ligands. The dinuclear complex (6,6′-dihydroxybipyridine-2κ2N,N′[μ-6-(6-hydroxypyridin-2-ylpyridin-2-olato-1:2κ3N,N′:O2](μ-hydroxido-1:2κ2O:O′(μ-nitrato-1:2κ2O:O′(nitrato-1κOdicopper(II, [Cu2(C10H7N2O2(OH(NO32(C10H8N2O2] or [Cu(6-OH-6′-O-bpy(NO3(μ-OH(μ-NO3Cu(6,6′-dhbp], (I, with a 2:1 ratio of nitrate to hydroxide anions and one partially deprotonated dhbp ligand, forms from a water–ethanol mixture at neutral pH. The hexanuclear complex bis(μ3-bipyridine-2,2′-diolato-κ3O:N,N′:O′tetrakis(6,6′-dihydroxybipyridine-κ2N,N′tetrakis(μ-hydroxido-κ2O:O′bis(methanol-κOtetrakis(μ-nitrato-κ2O:O′hexacopper(II, [Cu6(C10H6N2O22(CH4O2(OH4(NO34(C10H8N2O24] or [Cu(6,6′-dhbp(μ-NO32(μ-OHCu(6,6′-O-bpy(μ-OHCu(6,6′dhbp(CH3OH]2, (II, with a 1:1 NO3–OH ratio and two fully protonated and fully deprotonated dhbp ligands, was obtained by methanol recrystallization of material obtained at pH 3. Complex (II lies across an inversion center. Complexes (I and (II both display intramolecular O—H...O hydrogen bonding. Intermolecular O—H...O hydrogen bonding links symmetry-related molecules forming chains along [100] for complex (I with π-stacking along [010] and [001]. Complex (II forms intermolecular O—H...O hydrogen-bonded chains along [010] with π-stacking along [100] and [001].

  20. LYMPHOPROLIFERATIVE SYNDROMES ASSOCIATED WITH HUMAN HERPESVIRUS-6A AND HUMAN HERPESVIRUS-6B

    Directory of Open Access Journals (Sweden)

    Eva Eliassen

    2018-05-01

    Full Text Available Human herpesvirus 6A and 6B (HHV-6A and HHV-6B have been noted since their discovery for their T-lymphotropism. Although it has proven difficult to determine the extent to which HHV-6A and HHV-6B are involved in the pathogenesis of many diseases, evidence suggests that primary infection and reactivation of both viruses may induce or contribute to the progression of several lymphoproliferative disorders, ranging from benign to malignant and including infectious mononucleosis-like illness, drug induced hypersensitivity syndrome/drug reaction with eosinophilia and systemic symptoms (DIHS/DRESS, and nodular sclerosis Hodgkin’s lymphoma. Herein, we discuss the conditions associated with the lymphoproliferative capacity of HHV-6, as well as the potential mechanisms behind them. Continued exploration on this topic may add to our understanding of the interactions between HHV-6 and the immune system and may open the doors to more accurate diagnosis and treatment of certain lymphoproliferative disorders.

  1. 6 CFR 25.6 - Procedures for designation of qualified anti-terrorism technologies.

    Science.gov (United States)

    2010-01-01

    ...-terrorism technologies. 25.6 Section 25.6 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY REGULATIONS TO SUPPORT ANTI-TERRORISM BY FOSTERING EFFECTIVE TECHNOLOGIES § 25.6 Procedures for designation of qualified anti-terrorism technologies. (a) Application Procedure. Any person, firm or other...

  2. 6,6'-Dimethoxygossypol: molecular structure, crystal polymorphism, and solvate formation

    Science.gov (United States)

    6,6´-Dimethoxygossypol (DMG) is a naturally produced derivative of gossypol that is found in relatively high concentration in some Gossypium barbadense cotton varieties. Like gossypol, DMG forms an equimolar solvate with acetic acid, but it was not clear if, like gossypol, the compound would form c...

  3. Experimental investigation of highly excited states of the 5,6He and 5,6Li nuclei in the (6Li, 7Be) and (6Li, 7Li) one-nucleon-pick-up reactions

    International Nuclear Information System (INIS)

    Sakuta, S.B.; Novatskij, B.G.; Stepanov, D.N.; Aleksandrov, D.V.; Glukhov, Yu.A.; Nikol'skij, E.Yu.

    2002-01-01

    ( 6 Li, 7 Be) and ( 6 Li, 7 Li) reactions on the 6 Li, 7 Li nuclei have been investigated in the angular range of 0-20 deg in laboratory system at the 93-MeV 6 Li energy. Besides low-lying states of 5,6 He and 5,6 Li nuclei, broad structures have been observed in the measured spectra close to the t( 3 He) + d and t( 3 He) + t threshold at excitation energies of 16.75 (3/2 + ) and ∼ 20 MeV ( 5 He), 16.66 (3/2 + ) and ∼ 20 MeV ( 5 Li), 14.0 and 25 MeV ( 6 He), and ∼ 20 MeV ( 6 Li). Angular distributions, which have been measured for transitions to the ground (0 + ) and exited states at E x =1.8 MeV (2 + ) and 14.0 MeV of the 6 He nucleus in the 7 Li( 6 Li, 7 Be) 6 He reaction, have been analyzed in the framework of the finite-range distorted-waves method assuming the 1p- and 1s-proton pick-up mechanism. It has been shown that ( 6 Li, 7 Be) and ( 6 Li, 7 Li) reactions predominately proceed by one-step pick-up mechanism and broad structures which are observed at high excitation energies should be considered as quasimolecular states of the t( 3 He) + d and t( 3 He) + t type [ru

  4. Dielectric properties for SF6 and SF6 mixtures predicted from basic data

    International Nuclear Information System (INIS)

    Kline, L.E.; Davies, D.K.; Chen, C.L.; Chantry, P.J.

    1978-01-01

    α and eta, the ionization and attachment coefficients, and (E/N)*, the limiting breakdown electric field-to-gas density ratio, in SF 6 and SF 6 mixtures were calculated by numerically solving the Boltzmann equation for the electron energy distribution. The calculations require a knowledge of several electron collision cross sections. Published momentum transfer and ionization cross sections for SF 6 were used. Various attachment cross sections for SF 6 were measured by using electron beam techniques with mass spectrometric ion detection. A total cross section for electronic excitation of SF 6 was determined by comparing the predicted values of α, eta, and (E/N)* with measured values obtained from spatial current growth experiments in SF 6 in uniform fields over an extended range of E/N. With this self-consistent set of SF 6 cross sections, together with published He cross sections, it was then possible to predict the dielectric properties of SF 6 --He mixtures. Published experimental values of α for these mixtures lie between the values of α calculated with and without ionization of SF 6 by excited He atoms. Published experimental values of (E/N)* agree with the calculations to within 5%. 11 figures

  5. Synthesis and thermal stability of the sodalite Na6Zn2[Al6Si6O24](SO4)2 and its reaction with hydrogen

    DEFF Research Database (Denmark)

    Heiden, Frank; Nielsen, Ulla Gro; Warner, Terence Edwin

    2012-01-01

    Ca2[Al6Si6O24](SO4)2. Na6Zn2[Al6Si6O24](SO4)2 was shown to be largely immiscible with nosean, Na8[Al6Si6O24]SO4 in the solid-state. Na6Zn2[Al6Si6O24](SO4)2 decomposes above 700 °C, yielding nosean, Na8[Al6Si6O24]SO4; willemite, Zn2SiO4; gahnite, ZnAl2O4; and presumably a glass phase, 2Na2O•9SiO2...

  6. Chlorin e6 Conjugated Interleukin-6 Receptor Aptamers Selectively Kill Target Cells Upon Irradiation

    Directory of Open Access Journals (Sweden)

    Sven Kruspe

    2014-01-01

    Full Text Available Photodynamic therapy (PDT uses the therapeutic properties of light in combination with certain chemicals, called photosensitizers, to successfully treat brain, breast, prostate, and skin cancers. To improve PDT, current research focuses on the development of photosensitizers to specifically target cancer cells. In the past few years, aptamers have been developed to directly deliver cargo molecules into target cells. We conjugated the photosensitizer chlorin e6 (ce6 with a human interleukin-6 receptor (IL-6R binding RNA aptamer, AIR-3A yielding AIR-3A-ce6 for application in high efficient PDT. AIR-3A-ce6 was rapidly and specifically internalized by IL-6R presenting (IL-6R+ cells. Upon light irradiation, targeted cells were selectively killed, while free ce6 did not show any toxic effect. Cells lacking the IL-6R were also not affected by AIR-3A-ce6. With this approach, we improved the target specificity of ce6-mediated PDT. In the future, other tumor-specific aptamers might be used to selectively localize photosensitizers into cells of interest and improve the efficacy and specificity of PDT in cancer and other diseases.

  7. New metal-organic frameworks of [M(C6H5O7)(C6H6O7)(C6H7O7)(H2O)] . H2O (M=La, Ce) and [Ce2(C2O4)(C6H6O7)2] . 4H2O

    International Nuclear Information System (INIS)

    Weng Shengfeng; Wang, Yun-Hsin; Lee, Chi-Shen

    2012-01-01

    Two novel materials, [M(C 6 H 5 O 7 )(C 6 H 6 O 7 )(C 6 H 7 O 7 )(H 2 O)] . H 2 O (M=La(1a), Ce(1b)) and [Ce 2 (C 2 O 4 )(C 6 H 6 O 7 ) 2 ] . 4H 2 O (2), with a metal-organic framework (MOF) were prepared with hydrothermal reactions and characterized with photoluminescence, magnetic susceptibility, thermogravimetric analysis and X-ray powder diffraction in situ. The crystal structures were determined by single-crystal X-ray diffraction. Compound 1 crystallized in triclinic space group P1-bar (No. 2); compound 2 crystallized in monoclinic space group P2 1 /c (No. 14). The structure of 1 is built from a 1D MOF, composed of deprotonated citric ligands of three kinds. Compound 2 contains a 2D MOF structure consisting of citrate and oxalate ligands; the oxalate ligand arose from the decomposition in situ of citric acid in the presence of Cu II ions. Photoluminescence spectra of compounds 1b and 2 revealed transitions between the 5d 1 excited state and two levels of the 4f 1 ground state ( 2 F 5/2 and 2 F 7/2 ). Compounds 1b and 2 containing Ce III ion exhibit a paramagnetic property with weak antiferromagnetic interactions between the two adjacent magnetic centers. - Graphical Abstract: [M(C 6 H 5 O 7 )(C 6 H 6 O 7 )(C 6 H 7 O 7 )(H 2 O)] . H 2 O (M=La(1a), Ce(1b)) and [Ce 2 (C 2 O 4 )(C 6 H 6 O 7 ) 2 ] . 4H 2 O (2)—with 1D and 2D structures were synthesized and characterized. Highlights: ► Two MOF – [M(C 6 H 5 O 7 )(C 6 H 6 O 7 )(C 6 H 7 O 7 )(H 2 O)] . H 2 O (M=La(1a), Ce(1b)) and [Ce 2 (C 2 O 4 )(C 6 H 6 O 7 ) 2 ] . 4H 2 O (2) – with 1D and 2D structures. ► The adjacent chains of the 1D framework were correlated with each other through an oxalate ligand to form a 2D layer structure. ► The source of the oxalate ligand was the decomposition in situ of citric acid oxidized in the presence of Cu II ions.

  8. Positronium formation in CS2 and C6F6 mixtures with triethylamine or tetrahydrofuran

    International Nuclear Information System (INIS)

    Zhicheng Zhang; Ito, Yasuo; Tabata, Yoneho

    1990-01-01

    Positronium (Ps) yields were measured for CS 2 /THF, CS 2 /TEA, C 6 F 6 THF and C 6 F 6 /TEA mixtures. Addition of C 6 F 6 or CS 2 into TEA or THF showed a similar influence which induces a decrease of Ps yield. This is ascribed to the non-dissociative electron scavenging by both CS 2 and C 6 F 6 . On the other hand, the effect of addition of TEA and THF has been found to be different for C 6 F 6 and CS 2 , i.e. both TEA and THF did not change Ps yield in CS 2 substantially, while they caused a sharp decrease of Ps yield in C 6 F 6 . The latter sharp decreases was ascribed to quenching of excited state of C 6 F 6 . This interpretation is supported by pulse radiolysis emission measurements for the same system, in which it was found that TEA quenches the excited state of C 6 F 6 efficiently. (author)

  9. Oxidation of the phytoalexin maackiain to 6,6-dihydroxy-maackiain by Colletotrichum gloeosporioides.

    Science.gov (United States)

    Soby, S; Bates, R; van Etten, H

    1997-07-01

    Phytoalexins are low molecular weight antibiotic compounds produced by plants in response to infection by microbes. These antimicrobial compounds are thought to provide resistance to microbial invasion and colonization. (-)Maackiain and its pterocarpan relatives can be oxidized at a number of sites, including at the 6 carbon. A previously unknown metabolite was produced for (-)maackiain by the broad host-range pathogen Colletotrichum gloeosporioides (Glomerella cingulata). This unknown was identified by LC-MS-MS and NMR spectroscopy to be 6,6a-di-OH-maackiain (3,6,6a-trihydroxy-8,9,methylenedioxy-pterocarpan). It is produced by isolates that represent all four races and pathotypes of C. gloeosporioides isolated from the tropical forage legume Stylosanthes spp. We present evidence that the primary metabolite (-)6a-OH-maackiain is subsequently hydroxylated at carbon 6, a step resulting in a compound that is increased in polarity and decreased in toxicity relative to the parent compound and (-)6a-OH-maackiain. This further oxidation may be required for efficient excretion or carbon source scavenging.

  10. Complexities in human herpesvirus-6A and -6B binding to host cells

    International Nuclear Information System (INIS)

    Pedersen, Simon Metz; Hoellsberg, Per

    2006-01-01

    Human herpesvirus-6A and -6B uses the cellular receptor CD46 for fusion and infection of the host cell. The viral glycoprotein complex gH-gL from HHV-6A binds to the short consensus repeat 2 and 3 in CD46. Although all the major isoforms of CD46 bind the virus, certain isoforms may have higher affinity than others for the virus. Within recent years, elucidation of the viral complex has identified additional HHV-6A and -6B specific glycoproteins. Thus, gH-gL associates with a gQ1-gQ2 dimer to form a heterotetrameric complex. In addition, a novel complex consisting of gH-gL-gO has been described that does not bind CD46. Accumulating evidence suggests that an additional HHV-6A and -6B receptor exists. The previous simple picture of HHV-6A/B-host cell contact therefore includes more layers of complexities on both the viral and the host cell side of the interaction

  11. Chapter 6: Accidents; Capitulo 6: Acidentes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-06-01

    The chapter 6 talks about the accidents with radiators all over the world, specifically, the Stimos, in Italy, 1975, San Salvador, in El Salvador, 1989, Soreq, in Israel, 1990, Nesvizh, in Byelorussian, 1991, in Illinois, US, 1965, in Maryland, US, 1991, Hanoi, Vietnam, 1992, Fleurus, in Belgium, 2006. Comments on the accidents and mainly the learned lessons.

  12. m6A level and isoform characterization sequencing (m6A-LAIC-seq) reveals the census and complexity of the m6A epitranscriptome

    OpenAIRE

    Molinie, Benoit; Wang, Jinkai; Lim, Kok-Seong; Hillebrand, Roman; Lu, Zhi-xiang; Van Wittenberghe, Nicholas; Howard, Benjamin D.; Daneshvar, Kaveh; Mullen, Alan C.; Dedon, Peter; Xing, Yi; Giallourakis, Cosmas C.

    2016-01-01

    N6-Methyladenosine (m6A) is a widespread, reversible chemical modification of RNA molecules, implicated in many aspects of RNA metabolism. Little quantitative information exists as to either how many transcript copies of particular genes are m6A modified (‘m6A levels’) or the relationship of m6A modification(s) to alternative RNA isoforms. To deconvolute the m6A epitranscriptome, we developed m6A-level and isoform-characterization sequencing (m6A-LAIC-seq). We found that cells exhibit a broad...

  13. Enhanced CANDU 6 Reactor

    International Nuclear Information System (INIS)

    Azeez, S.; Alizadeh, A.; Girouard, P.

    2005-01-01

    Full text: The CANDU 6 power reactor is visionary in its approach, remarkable for its on-power refuelling capability and proven over years of safe, economical and reliable power production. Developed by Atomic Energy of Canada Ltd, the CANDU 6 design offers excellent performance utilizing state-of-the-art technology. The first CANDU 6 plants went into service in the early 1980's as leading edge technology and the design has been continuously advanced to maintain superior performance with an outstanding safety record. The first CANDU 6 plants- Gentilly 2 and Point Lepreau in Canada, Embalse in Argentina and Wolsong- Unit 1 in Korea have been in service for more than 21 years and are still producing electricity at peak performance and to the end of 2004, their average lifetime Capacity Factor was 83.2%. The newer CANDU 6 units in Romania (Cernavoda 1), Korea (Wolsong-Units 2, 3 and 4) and Qinshan (Phase III- Units 1 and 2) have also been performing at outstanding levels. The average lifetime Capacity Factor of the 10 CANDU 6 operating units around the world has been 87% to the end of 2004. Building on these successes, AECL is committed to the further development of this highly successful design, now focussing on meeting customer's needs for reduced costs, further improvements to plant operation and performance, enhanced safety and incorporating up-to-date technology as warranted. This has resulted in AECL embarking on improving the CANDU 6 design through an upgraded product termed as the 'Enhanced CANDU 6' (EC6)- which incorporates several attractive but proven features that will make the CANDU 6 reactor even more economical, safer and easier to operate. Some of the key features that will be incorporated in the EC6 include increasing the plant's power output, shortening the overall project schedule, decreasing the capital cost, dealing with obsolescence issues, optimizing maintenance outages and incorporating lessons learnt through feedback obtained from the

  14. Superconductivity of Hg3NbF6 and Hg3TaF6

    International Nuclear Information System (INIS)

    Datars, W.R.; Morgan, K.R.; Gillespie, R.J.

    1983-01-01

    Low-temperature ac susceptibility measurements show that two new metallic compounds, Hg 3 TaF 6 and Hg 3 NbF 6 , are superconductors with a critical temperature of 7.0 K. Critical fields are 20% higher in Hg 3 TaF 6 but the temperature dependence of the critical field of the compounds is very similar down to 1.35 K. The critical field extrapolated to T = 0 K is 0.17 T for Hg 3 TaF 6 and 0.13 T for Hg 3 NbF 6

  15. Validation of 123I-6-deoxy-6-iodo-D-glucose (6-DIC) as tracer for the in-vivo glucose transport

    International Nuclear Information System (INIS)

    Perret, P.; Ghezzi, C.; Mathieu, J.P.; Morin, C.; Vidal, M.; Comet, M.; Fagret, D.

    1997-01-01

    The evaluation of the glucose transport is very important clinically because alterations of this transport were described in numerous pathologies, in neurology, oncology and endocrinology. A new analog of the 123 I-labelled has been synthesized: 123 I-6-deoxy-6-iodo-D-glucose (6-DIG). Its in-vitro biological behaviour is similar to that of 3-O-methyl-D-glucose (3-OMG), the reference tracer of glucose transport. The aim of the study was to determine if it is possible to make evident by 6-DIG a variations of in-vivo glucose transport. The studies were effected on a model of homozygote mice (db/db), genetically diabetic (NIDDM), presenting a severe insulin-resistance, characterized by deficient glucose transport in response to insulin. The studies of 6-DIG biodistribution (5 nmol/mouse) with (1.5 UI/Kg) or without exogenous insulin, were conducted in diabetic mice (db/db) and in non-diabetic (db/+) control mice. The results show that the capture of 6-DIG, as well as that of glucose, increases (by 30%) in response to insulin in most of insulin-sensitive tissues in control mice. In the insulin-resistant and hyperglycemic db/db mouse, the capture of 6-DIG is not modified, no matter whether the exogenous insulin is present. In conclusion, the 6-DIG is able to make evident a lack of glucose transport in heart, diaphragm and skeletal muscle in diabetic mouse and a physiological variation of this transport in response to insulin, in the control mouse. This result should be stressed because for the first time it is possible to evidence in-vivo variations into glucose transport with a iodated molecule

  16. α2, 6 Sialylation associated with increased β1, 6-branched N ...

    Indian Academy of Sciences (India)

    Invasive variants of B16 murine melanoma, B16F10 (parent) and B16BL6 (highly invasive variant) cell lines have been used for these studies. We demonstrate that substitution of 2,6-linked sialic acids on multiantennary structures formed as a result of 1,6-branching modulate cellular adhesion on both extracellular matrix ...

  17. WLCG and IPv6 – the HEPiX IPv6 working group

    International Nuclear Information System (INIS)

    Campana, S; Elwell, A; Goossens, L; Grigoras, C; Martelli, E; Nairz, A; Pfeiffer, A; Chadwick, K; Chen, G; Chudoba, J; Eliáš, M; Kouba, T; Clarke, P; Fayer, S; Finnern, T; Ohrenberg, K; Hoeft, B; Kelsey, D P; Muñoz, F López; Mitchell, M

    2014-01-01

    The HEPiX (http://www.hepix.org) IPv6 Working Group has been investigating the many issues which feed into the decision on the timetable for the use of IPv6 (http://www.ietf.org/rfc/rfc2460.txt) networking protocols in High Energy Physics (HEP) Computing, in particular in the Worldwide Large Hadron Collider (LHC) Computing Grid (WLCG). RIPE NCC, the European Regional Internet Registry (RIR), ran out ofIPv4 addresses in September 2012. The North and South America RIRs are expected to run out soon. In recent months it has become more clear that some WLCG sites, including CERN, are running short of IPv4 address space, now without the possibility of applying for more. This has increased the urgency for the switch-on of dual-stack IPv4/IPv6 on all outward facing WLCG services to allow for the eventual support of IPv6-only clients. The activities of the group include the analysis and testing of the readiness for IPv6 and the performance of many required components, including the applications, middleware, management and monitoring tools essential for HEP computing. Many WLCG Tier 1/2 sites are participants in the group's distributed IPv6 testbed and the major LHC experiment collaborations are engaged in the testing. We are constructing a group web/wiki which will contain useful information on the IPv6 readiness of the various software components and a knowledge base (http://hepix-ipv6.web.cern.ch/knowledge-base). This paper describes the work done by the working group and its future plans.

  18. Poly[[tetraaqua(μ3-naphthalene-1,6-disulfonato-κ4O1:O6,O6′:O6′′strontium(II] monohydrate

    Directory of Open Access Journals (Sweden)

    Shan Gao

    2011-12-01

    Full Text Available In the crystal structure of the polymeric title compound, {[Sr(C10H6O6S2(H2O4]·H2O}n, the naphthalene-1,6-disulfonate dianion uses one –SO3 unit to O,O′-chelate to an SrII cation and its third O atom to bind to another SrII cation. The other –SO3 unit binds to yet another SrII atom. The four coordinated water molecules are monodentate but one is disordered over two positions in a 1:1 ratio. The μ3-bonding mode of the dianion generates a polymeric three-dimensional network; the network is consolidated by O—H...O hydrogen bonds. The SrII cation exists in an undefined eight-coordinate environment.

  19. m6ASNP: a tool for annotating genetic variants by m6A function.

    Science.gov (United States)

    Jiang, Shuai; Xie, Yubin; He, Zhihao; Zhang, Ya; Zhao, Yuli; Chen, Li; Zheng, Yueyuan; Miao, Yanyan; Zuo, Zhixiang; Ren, Jian

    2018-04-02

    Large-scale genome sequencing projects have identified many genetic variants for diverse diseases. A major goal of these projects is to characterize these genetic variants to provide insight into their function and roles in diseases. N6-methyladenosine (m6A) is one of the most abundant RNA modifications in eukaryotes. Recent studies have revealed that aberrant m6A modifications are involved in many diseases. In this study, we present a user-friendly web server called "m6ASNP" that is dedicated to the identification of genetic variants targeting m6A modification sites. A random forest model was implemented in m6ASNP to predict whether the methylation status of a m6A site is altered by the variants surrounding the site. In m6ASNP, genetic variants in a standard VCF format are accepted as the input data, and the output includes an interactive table containing the genetic variants annotated by m6A function. In addition, statistical diagrams and a genome browser are provided to visualize the characteristics and annotate the genetic variants. We believe that m6ASNP is a highly convenient tool that can be used to boost further functional studies investigating genetic variants. The web server "m6ASNP" is implemented in JAVA and PHP and is freely available at http://m6asnp.renlab.org.

  20. Functional Analysis of Mouse G6pc1 Mutations Using a Novel In Situ Assay for Glucose-6-Phosphatase Activity and the Effect of Mutations in Conserved Human G6PC1/G6PC2 Amino Acids on G6PC2 Protein Expression.

    Directory of Open Access Journals (Sweden)

    Kayla A Boortz

    Full Text Available Elevated fasting blood glucose (FBG has been associated with increased risk for development of type 2 diabetes. Single nucleotide polymorphisms (SNPs in G6PC2 are the most important common determinants of variations in FBG in humans. Studies using G6pc2 knockout mice suggest that G6pc2 regulates the glucose sensitivity of insulin secretion. G6PC2 and the related G6PC1 and G6PC3 genes encode glucose-6-phosphatase catalytic subunits. This study describes a functional analysis of 22 non-synonymous G6PC2 SNPs, that alter amino acids that are conserved in human G6PC1, mouse G6pc1 and mouse G6pc2, with the goal of identifying variants that potentially affect G6PC2 activity/expression. Published data suggest strong conservation of catalytically important amino acids between all four proteins and the related G6PC3 isoform. Because human G6PC2 has very low glucose-6-phosphatase activity we used an indirect approach, examining the effect of these SNPs on mouse G6pc1 activity. Using a novel in situ functional assay for glucose-6-phosphatase activity we demonstrate that the amino acid changes associated with the human G6PC2 rs144254880 (Arg79Gln, rs149663725 (Gly114Arg and rs2232326 (Ser324Pro SNPs reduce mouse G6pc1 enzyme activity without affecting protein expression. The Arg79Gln variant alters an amino acid mutation of which, in G6PC1, has previously been shown to cause glycogen storage disease type 1a. We also demonstrate that the rs368382511 (Gly8Glu, rs138726309 (His177Tyr, rs2232323 (Tyr207Ser rs374055555 (Arg293Trp, rs2232326 (Ser324Pro, rs137857125 (Pro313Leu and rs2232327 (Pro340Leu SNPs confer decreased G6PC2 protein expression. In summary, these studies identify multiple G6PC2 variants that have the potential to be associated with altered FBG in humans.

  1. The Effect of Salt Splash on Nylon 6,6

    OpenAIRE

    Steward, Scott D

    1999-01-01

    Abstract: One of the most common environmental exposures that nylon undergoes, when used for automotive applications, is that of salt splash, which commonly occurs during winter driving. This study looks at the effect of various salts (NaCl, KCl, CaCl2) on the thermal and mechanical properties of nylon when exposed to one and four molar aqueous salt solutions. It was found that the diffusion of salt solutions into nylon 6,6 occurred in a pseudo-Fickian manner. Also, it was found that the p...

  2. Vitamin B6

    Science.gov (United States)

    ... pork Nuts Poultry Whole grains and fortified cereals Canned chickpeas Fortified breads and cereals may also contain vitamin B6. Fortified means that a vitamin or mineral has been added to the food. Side Effects Large doses of vitamin B6 can cause: Difficulty ...

  3. Theoretical study of the structure of a Ga{sub 6}N{sub 6} cluster

    Energy Technology Data Exchange (ETDEWEB)

    Song Bin; Cao Peilin; Li Baoxing

    2003-08-25

    The structures and energies of a Ga{sub 6}N{sub 6} cluster have been calculated using a full-potential linear-muffin-tin-orbital (FP-LMTO) method, combined with molecular dynamics and simulated annealing techniques. We obtained 19 structures for a Ga{sub 6}N{sub 6} cluster. The most stable structure we obtained is a C{sub s} three-dimensional structure with a N{sub 2} and N{sub 3} subunits. The calculated results show that the existence of strong N-N bonds still dominates the structure of a Ga{sub 6}N{sub 6} cluster, supporting the previous result made by Kandalam et al. [J. Phys. Chem. B 106 (2002) 1945]. Through the calculation of the density of states we found that the most stable structure of Ga{sub 6}N{sub 6} clusters presented semiconductor-like properties.

  4. Six-six (6-6) cell used in X-ray and neutron diffraction experiments under high pressure

    International Nuclear Information System (INIS)

    Nishiyama, Norimasa; Yamada, Akihiro

    2015-01-01

    At synchrotron radiation facilities and neutron experimental facilities, X-ray diffraction experiments and neutron diffraction experiments under high-pressure for large-capacity of samples are conducted using DIA type device and 6-axis pressure device that add pressure on cubic space. As the anvil assembly capable of mounting on the above two devices, MA6-6 cell has come to be used. This paper introduces the advantages of using MA6-6 cell, pressure region where experiment is possible with MA6-6 cell, and large-capacity high-pressure press beamline P61.2 that simulates MA-6-6 cell. At MA6-6 cell, 6 pieces of the first-stage anvils of DIA type device or 6-axis pressure device pressurize 6 pieces of the second-stage anvils. These second-stage anvils are included in MA6-6 anvil assembly. The greatest feature of MA6-6 cell is the adoption of the frame for taking alignment of the second stage anvils. By combining MA6-6 cell with DIA-type device or 6-axis pressure device, the degree of freedom of experiment increases, which can simplify the experimental setup. (A.O.)

  5. NEB in Analysis of Optical Flow 4 x 4 and 6 x 6-Patches

    International Nuclear Information System (INIS)

    Xia, Shengxiang; Liang, Di

    2017-01-01

    We apply the nudged elastic band technique to non-lineal high-dimensional datasets, we analyze spaces of 4 x 4 and 6 x 6 optical flow patches and detect their topological properties. We experimentally prove that subsets of 4 x 4 and 6 x 6 optical flow patches can be modeled a circle, which confirm some results of 4 x 4 and 6 x 6 optical flow patches by using a new method-NEB, and expend Adams et al's result to larger patches of optical flow. (paper)

  6. Synthesis of the Novel 4,4?- and 6,6?- Dihydroxamic - 2,2?-Bipyridines and Improved Routes to 4,4?- and 6,6?- Substituted 2,2?-Bipyridines and Mono-N-Oxide-2,2?-Bipyridine

    Directory of Open Access Journals (Sweden)

    Donnici Claudio Luis

    1998-01-01

    Full Text Available The preparation of key precursors for many 2,2?-bipyridine derivatives such as 4,4?-dicarboxy- 2,2?-bipyridine (I, 6,6?-dicarboxy-2,2?-bipyridine- acid (II, 4,4?-dinitro-2,2?-bipyridine-N,N-dioxide (III, 6,6?-dicarbothioamide-2,2?-bipyridine (IV and mono-N-oxide-2,2?-bipyridine (VII through more efficient methods is described. The syntheses of the novel ligands 4,4?-dihydroxamic-2,2?-bipyridine (V and 6,6?-dihydroxamic-2,2?-bipyridine (VI are also reported.

  7. Characteristics of gravity fields in the Jinggu M6.6 earthquake

    Directory of Open Access Journals (Sweden)

    Sun Shaoan

    2014-11-01

    Full Text Available Based on the study of high-precision gravity data obtained from recent studies and the regional gravity network for Yunnan province, a variation in the regional gravity field was identified before the occurrence of the Yunnan Jinggu M6. 6 earthquake.

  8. RAID-6Plus: A Comprised Methodology for Extending RAID-6 Codes

    Directory of Open Access Journals (Sweden)

    Ming-Zhu Deng

    2017-01-01

    Full Text Available Existing RAID-6 code extensions assume that failures are independent and instantaneous, overlooking the underlying mechanism of multifailure occurrences. Also, the effect of reconstruction window is ignored. Additionally, these coding extensions have not been adapted to occurrence patterns of failure in real-world applications. As a result, the third parity drive is set to handle the triple-failure scenario; however, the lower level failure situations have been left unattended. Therefore, a new methodology of extending RAID-6 codes named RAID-6Plus with better compromise has been studied in this paper. RAID-6Plus (Deng et al., 2015 employs short combinations which can greatly reuse overlapped elements during reconstruction to remake the third parity drive. A sample extension code called RDP+ is given based on RDP. Moreover, we extended the study to present another extension example called X-code+ which has better update penalty and load balance. The analysis shows that RAID-6Plus is a balanced tradeoff of reliability, performance, and practicality. For instance, RDP+ could achieve speedups as high as 33.4% in comparison to the RTP with conventional rebuild, 11.9% in comparison to RTP with the optimal rebuild, 47.7% in comparison to STAR with conventional rebuild, and 26.2% for a single failure rebuild.

  9. No-carrier-added (NCA) synthesis of 6-[18F]fluoro-L-DOPA using 3,5,6,7,8,8a-hexahydro-7,7,8a-trimethyl-[6S-(6α, 8α, 8αβ)]-6,8-methano-2H-1,4-benzoxazin-2-one

    International Nuclear Information System (INIS)

    Horti, A.; Yale Univ., West Haven, CT; Redmond, D.E. Jr.; Soufer, R.

    1995-01-01

    3,5,6,7,8,8a-Hexahydro-7,7,8a-trimethyl-[6S-(6α,8α , 8αβ)]-6,8-methano-2H-1,4-benzoxazino-2-one (2) was investigated as chiral auxiliary for asymmetric NCA nucleophilic synthesis of 6-[ 18 F]Fluoro-L-DOPA. Direct condensation of 3,4-dimethoxy-2-[ 18 F]fluorobenzaldehyde (1a) or 6-[ 18 F]fluoro-piperonal (1b) in the presence of NaH with 2 gave the corresponding [ 18 F]-3-[(2-fluorophenyl)methylene]-3,5,6,7,8,8a-hexahydro-7,7,8 a-trimethyl-[6S-(3Z,3α,6α,8α,8αβ)]-6, 8-methano-2H-1,4-benzoxazin-2-one derivative 3a or 3b as a single stereoisomer. L-Selectride promoted hydrogenation of the olefinic double bond of these derivatives, in presence of tertbutyl alcohol, afforded the corresponding [ 18 F]-3-[(2-fluorophenyl) methyl]-3,5,6,7,8,8a-hexahydro-7,7,8a-trimethyl-[3S-(3α, 6α, 8α8αβ)]-6,8-methano-2H-1,4-benzoxazin-2-one derivatives (4a,b) without affecting the orientation of diasterofacial discrimination. Deprotection of the derivatives 4a,b yielded 6-[ 18 F]fluoro-L-DOPA (e.e. >90%, 3% radiochemical yield (EOB), total synthesis time 125 min, specific activity >2000 mCi/μmol). Direct deprotection/reduction of the compounds 3a,b provides the enantiomeric mixture of 6-[ 18 F]fluoro-D,L-DOPA (10-12% radiochemical yield) and, after chiral separation, 6-[ 18 F]fluoro-L-DOPA (e.e. 98%, 4-5% radiochemical yield). (author)

  10. HPV16 E6 and E6AP differentially cooperate to stimulate or augment Wnt signaling

    International Nuclear Information System (INIS)

    Sominsky, Sophia; Kuslansky, Yael; Shapiro, Beny; Jackman, Anna; Haupt, Ygal; Rosin-Arbesfeld, Rina; Sherman, Levana

    2014-01-01

    The present study investigated the roles of E6 and E6AP in the Wnt pathway. We showed that E6 levels are markedly reduced in cells in which Wnt signaling is activated. Coexpression of wild-type or mutant E6AP (C820A) in Wnt-activated cells stabilized E6 and enhanced Wnt/β-catenin/TCF transcription. Expression of E6AP alone in nonstimulated cells elevated β-catenin level, promoted its nuclear accumulation, and activated β-catenin/TCF transcription. A knockdown of E6AP lowered β-catenin levels. Coexpression with E6 intensified the activities of E6AP. Further experiments proved that E6AP/E6 stabilize β-catenin by protecting it from proteasomal degradation. This function was dependent on the catalytic activity of E6AP, the kinase activity of GSK3β and the susceptibility of β-catenin to GSK3β phosphorylation. Thus, this study identified E6AP as a novel regulator of the Wnt signaling pathway, capable of cooperating with E6 in stimulating or augmenting Wnt/β-catenin signaling, thereby possibly contributing to HPV carcinogenesis. - Highlights: • The roles of E6 and E6AP in the Wnt pathway were investigated. • E6AP stabilizes E6 and enhances E6 activity in augmentation of Wnt signaling. • E6AP cooperates with E6 to stabilize β-catenin and stimulate Wnt/β-catenin signaling. • E6AP and E6 act through different mechanisms to augment or stimulate Wnt signaling

  11. HPV16 E6 and E6AP differentially cooperate to stimulate or augment Wnt signaling

    Energy Technology Data Exchange (ETDEWEB)

    Sominsky, Sophia, E-mail: sophia.tab@gmail.com [Department of Clinical Microbiology and Immunology, Sackler School of Medicine, Tel Aviv University, Tel Aviv 69978 (Israel); Kuslansky, Yael, E-mail: ykuslansky@gmail.com [Department of Clinical Microbiology and Immunology, Sackler School of Medicine, Tel Aviv University, Tel Aviv 69978 (Israel); Shapiro, Beny, E-mail: benyshap@gmail.com [Department of Clinical Microbiology and Immunology, Sackler School of Medicine, Tel Aviv University, Tel Aviv 69978 (Israel); Jackman, Anna, E-mail: jackman@post.tau.ac.il [Department of Clinical Microbiology and Immunology, Sackler School of Medicine, Tel Aviv University, Tel Aviv 69978 (Israel); Haupt, Ygal, E-mail: ygal.haupt@petermac.org [Research Division, The Peter MacCallum Cancer Centre, East Melbourne (Australia); Rosin-Arbesfeld, Rina, E-mail: arina@post.tau.ac.il [Department of Clinical Microbiology and Immunology, Sackler School of Medicine, Tel Aviv University, Tel Aviv 69978 (Israel); Sherman, Levana, E-mail: lsherman@post.tau.ac.il [Department of Clinical Microbiology and Immunology, Sackler School of Medicine, Tel Aviv University, Tel Aviv 69978 (Israel)

    2014-11-15

    The present study investigated the roles of E6 and E6AP in the Wnt pathway. We showed that E6 levels are markedly reduced in cells in which Wnt signaling is activated. Coexpression of wild-type or mutant E6AP (C820A) in Wnt-activated cells stabilized E6 and enhanced Wnt/β-catenin/TCF transcription. Expression of E6AP alone in nonstimulated cells elevated β-catenin level, promoted its nuclear accumulation, and activated β-catenin/TCF transcription. A knockdown of E6AP lowered β-catenin levels. Coexpression with E6 intensified the activities of E6AP. Further experiments proved that E6AP/E6 stabilize β-catenin by protecting it from proteasomal degradation. This function was dependent on the catalytic activity of E6AP, the kinase activity of GSK3β and the susceptibility of β-catenin to GSK3β phosphorylation. Thus, this study identified E6AP as a novel regulator of the Wnt signaling pathway, capable of cooperating with E6 in stimulating or augmenting Wnt/β-catenin signaling, thereby possibly contributing to HPV carcinogenesis. - Highlights: • The roles of E6 and E6AP in the Wnt pathway were investigated. • E6AP stabilizes E6 and enhances E6 activity in augmentation of Wnt signaling. • E6AP cooperates with E6 to stabilize β-catenin and stimulate Wnt/β-catenin signaling. • E6AP and E6 act through different mechanisms to augment or stimulate Wnt signaling.

  12. Ice Sheet Model Intercomparison Project (ISMIP6) contribution to CMIP6

    NARCIS (Netherlands)

    Nowicki, Sophie M J; Payne, Anthony; Larour, Eric; Seroussi, Helene; Goelzer, Heiko|info:eu-repo/dai/nl/412549123; Lipscomb, William; Gregory, Jonathan; Abe-Ouchi, Ayako; Shepherd, Andrew

    2016-01-01

    Reducing the uncertainty in the past, present, and future contribution of ice sheets to sea-level change requires a coordinated effort between the climate and glaciology communities. The Ice Sheet Model Intercomparison Project for CMIP6 (ISMIP6) is the primary activity within the Coupled Model

  13. Features of MCNP6

    International Nuclear Information System (INIS)

    Goorley, T.; James, M.; Booth, T.; Brown, F.; Bull, J.; Cox, L.J.; Durkee, J.; Elson, J.; Fensin, M.; Forster, R.A.; Hendricks, J.; Hughes, H.G.; Johns, R.; Kiedrowski, B.; Martz, R.; Mashnik, S.; McKinney, G.; Pelowitz, D.; Prael, R.; Sweezy, J.

    2016-01-01

    Highlights: • MCNP6 is simply and accurately described as the merger of MCNP5 and MCNPX capabilities, but it is much more than the sum of these two computer codes. • MCNP6 is the result of six years of effort by the MCNP5 and MCNPX code development teams. • These groups of people, residing in Los Alamos National Laboratory’s X Computational Physics Division, Monte Carlo Codes Group (XCP-3) and Nuclear Engineering and Nonproliferation Division, Radiation Transport Modeling Team (NEN-5) respectively, have combined their code development efforts to produce the next evolution of MCNP. • While maintenance and major bug fixes will continue for MCNP5 1.60 and MCNPX 2.7.0 for upcoming years, new code development capabilities only will be developed and released in MCNP6. • In fact, the initial release of MCNP6 contains numerous new features not previously found in either code. • These new features are summarized in this document. • Packaged with MCNP6 is also the new production release of the ENDF/B-VII.1 nuclear data files usable by MCNP. • The high quality of the overall merged code, usefulness of these new features, along with the desire in the user community to start using the merged code, have led us to make the first MCNP6 production release: MCNP6 version 1. • High confidence in the MCNP6 code is based on its performance with the verification and validation test suites, comparisons to its predecessor codes, our automated nightly software debugger tests, the underlying high quality nuclear and atomic databases, and significant testing by many beta testers. - Abstract: MCNP6 can be described as the merger of MCNP5 and MCNPX capabilities, but it is much more than the sum of these two computer codes. MCNP6 is the result of six years of effort by the MCNP5 and MCNPX code development teams. These groups of people, residing in Los Alamos National Laboratory’s X Computational Physics Division, Monte Carlo Codes Group (XCP-3) and Nuclear Engineering and

  14. Neutron diffraction studies on GdB{sub 6} and TbB{sub 6} powders

    Energy Technology Data Exchange (ETDEWEB)

    Luca, S.E.; Amara, M.; Galera, R.M.; Givord, F.; Granovsky, S.; Isnard, O.; Beneu, B

    2004-07-15

    We report here the first powder neutron diffraction study of GdB{sub 6} and TbB{sub 6}. GdB{sub 6} and TbB{sub 6} order antiferromagnetically at 15 and 21 K, respectively. In both compounds the transition at T{sub N} is of the first order. Moreover GdB{sub 6} presents a second spontaneous magnetic transition at T{sup *}=8 K. The present study shows that, in both compounds, the magnetic propagation vectors belong to the <((1)/(4)) ((1)/(4)) ((1)/(2))> star and that the direction of the magnetic moment is perpendicular to the ((1)/(2)) component of the wave-vector in GdB{sub 6}, while in TbB{sub 6} the moment is parallel to it. The deduced low-temperature values of the magnetic moments agree with those of the respective rare-earth trivalent ions.

  15. Direct analysis of [6,6-(2)H2]glucose and [U-(13)C6]glucose dry blood spot enrichments by LC-MS/MS.

    Science.gov (United States)

    Coelho, Margarida; Mendes, Vera M; Lima, Inês S; Martins, Fátima O; Fernandes, Ana B; Macedo, M Paula; Jones, John G; Manadas, Bruno

    2016-06-01

    A liquid chromatography tandem mass spectrometry (LC-MS/MS) using multiple reaction monitoring (MRM) in a triple-quadrupole scan mode was developed and comprehensively validated for the determination of [6,6-(2)H2]glucose and [U-(13)C6]glucose enrichments from dried blood spots (DBS) without prior derivatization. The method is demonstrated with dried blood spots obtained from rats administered with a primed-constant infusion of [U-(13)C6]glucose and an oral glucose load enriched with [6,6-(2)H2]glucose. The sensitivity is sufficient for analysis of the equivalent to blood and the overall method was accurate and precise for the determination of DBS isotopic enrichments. Copyright © 2016 Elsevier B.V. All rights reserved.

  16. Magnetic structures of Er6Mn23 and Dy6Mn23

    International Nuclear Information System (INIS)

    Ouladdiaf, B.; Deportes, J.; Rodriguez-Carvajal, J.

    1995-01-01

    The R 6 Mn 23 (R=rare earth) compounds crystallize in the cubic Th 6 Mn 23 -type structure with space group Fm3m. Powder neutron-diffraction experiments were performed on Dy 6 Mn 23 and Er 6 Mn 23 . The magnetic unit cell coincides with the chemical one. The R moments have a ferromagnetic non-collinear arrangement, whereas the Mn moments are parallel to the [1 1 1] direction. The magnetic structures belong to the three-dimensional Γ 5g irreducible representation of Fm3m associated with the wave vector K=[0 0 0]. The spin configurations in both compounds result from the competition between the R-R, R-Mn magnetic interactions and the crystal electric field on the R ions. (orig.)

  17. A Novel 6'-N-Aminoglycoside Acetyltransferase, AAC(6')-Ial, from a Clinical Isolate of Serratia marcescens.

    Science.gov (United States)

    Tada, Tatsuya; Miyoshi-Akiyama, Tohru; Shimada, Kayo; Dahal, Rajan K; Mishra, Shyam K; Ohara, Hiroshi; Kirikae, Teruo; Pokhrel, Bharat M

    2016-03-01

    Serratia marcescens IOMTU115 has a novel 6'-N-aminoglycoside acetyltransferase-encoding gene, aac(6')-Ial. The encoded protein AAC(6')-Ial has 146 amino acids, with 91.8% identity to the amino acid sequence of AAC(6')-Ic in S. marcescens SM16 and 97.3% identity to the amino acid sequence of AAC(6')-Iap in S. marcescens WW4. The minimum inhibitory concentrations of aminoglycosides for Escherichia coli expressing AAC(6')-Ial were similar to those for E. coli expressing AAC(6')-Ic or AAC(6')-Iap. Thin-layer chromatography showed that AAC(6')-Ial, AAC(6')-Ic, or AAC(6')-Iap acetylated all the aminoglycosides tested, except for apramycin, gentamicin, and lividomycin. Kinetics assays revealed that AAC(6')-Ial is a functional acetyltransferase against aminoglycosides. The aac(6')-Ial gene was located on chromosomal DNA.

  18. Enhanced CANDU 6 (EC6): a proven mid-sized reactor with fuel cycle capability

    International Nuclear Information System (INIS)

    Hopwood, J.; Soulard, M.; Hastings, I.J.

    2011-01-01

    Atomic Energy of Canada (AECL) is finalizing development of the Enhanced CANDU 6 (EC6), which incorporates the CANDU 6's well-proven features, and adds enhancements that make the reactor even more safe and easier to operate. The EC6 is the only mid-sized reactor (700 MWe class) with a proven pedigree that meets modern reactor expectations and regulatory standards. It is sized for smaller grids and also has outstanding fuel-cycle capability. Changes are incremental and consistent with the CANDU 6 project approach. The EC6 utilizes modern computers and a distributed control system housed in an advanced control room which, along with automated testing and on-line diagnostics, make the plant easier and safer to operate, with minimal operator intervention. Containment and seismic capability are upgraded to meet modern standards. The first deployment of the EC6 is anticipated in Canada; international markets are also being pursued. AECL is performing a comprehensive review of the EC6 design in the wake of the Fukushima accident, will review lessons learned, and incorporate any necessary improvements into new build design. (author)

  19. Enhanced CANDU 6 (EC6): a proven mid-sized reactor with fuel cycle capability

    International Nuclear Information System (INIS)

    Hopwood, J.; Soulard, M.; Hastings, I.J.

    2011-01-01

    Atomic Energy of Canada (AECL) is finalizing development of the Enhanced CANDU 6 (EC6), which incorporates the CANDU 6's well-proven features, and enhancements that make the reactor even more safe and easier to operate. The EC6 is the only mid-sized reactor (700 MWe class) with a proven pedigree that meets modern reactor expectations and regulatory standards. It is sized for smaller grids and also has outstanding fuel-cycle capability. Changes are incremental and consistent with the CANDU 6 project approach. The EC6 utilizes modern computers and a distributed control system housed in an advanced control room which, along with automated testing and on-line diagnostics, make the plant easier and safer to operate, with minimal operator intervention. Containment and seismic capability are upgraded to meet modern standards. The first deployment of the EC6 is anticipated in Canada; international markets are also being pursued. AECL is performing a comprehensive review of the EC6 design in the wake of the Fukushima accident, will review lessons learned, and incorporate any necessary improvements into new build design. (author)

  20. m6AVar: a database of functional variants involved in m6A modification

    OpenAIRE

    Zheng, Yueyuan; Nie, Peng; Peng, Di; He, Zhihao; Liu, Mengni; Xie, Yubin; Miao, Yanyan; Zuo, Zhixiang; Ren, Jian

    2017-01-01

    Abstract Identifying disease-causing variants among a large number of single nucleotide variants (SNVs) is still a major challenge. Recently, N 6-methyladenosine (m6A) has become a research hotspot because of its critical roles in many fundamental biological processes and a variety of diseases. Therefore, it is important to evaluate the effect of variants on m6A modification, in order to gain a better understanding of them. Here, we report m6AVar (http://m6avar.renlab.org), a comprehensive da...

  1. IPv6:n tietoturvaominaisuudet

    OpenAIRE

    Sorsa, Kari

    2013-01-01

    Opinnäytetyön tavoitteena on esitellä IPv6-protokolla ja selvittää sen tärkeimmät tietoturvaominaisuudet ja -riskit. Työtä tullaan käyttämään teoreettisena apuna Turun Ammattikorkeakoulun Lemminkäisenkadun toimipisteen laboratorioverkon siirtämisessä IPv6:een. Opinnäytetyö on jaettu kolmeen osaan. Ensimmäisessä esitellään lyhyesti IPv6:n historia ja kehitysvaiheet sekä uuden protokollan ominaisuudet. Toinen osa koostuu ominaisuus- ja tietoturvavertailusta IPv4:n ja IPv6:n välillä, jo...

  2. Planning for IPv6

    CERN Document Server

    Hagen, Silvia

    2011-01-01

    It's official: with IPv4 network addresses close to depletion, moving to IPv6 is now business critical. This concise book helps you plan for IPv6 integration by providing a high-level overview of the technical-and nontechnical-steps involved. Many of the challenges for your enterprise are on the organizational level, and solutions differ from company to company. IPv6 Essentials author Silvia Hagen, a protocol analysis and directory service expert who's worked with IPv6 international groups and forums for 10 years, supplies answers to the issues most frequently discussed by the clients she co

  3. Site Occupation of In in RAg{sub 6}In{sub 6} Studied Using PAC Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kruzel, M.; Krolas, K., E-mail: krolas@if.uj.edu.pl; Muszynski, L. [Jagiellonian University, Institute of Physics (Poland); Zaremba, V. I. [I. Franko National University of Lviv (Ukraine); Suski, W. [Polish Academy of Sciences (Poland)

    2004-11-15

    PAC measurements were performed for {sup 111}In in LaAg{sub 6}In{sub 6}, PrAg{sub 6}In{sub 6} and NdAg{sub 6}In{sub 6}. It appears that the probe atom occupy three available sites in the crystal lattice with quite a similar probability. There is a small preference for In atoms to occupy a selected lattice site which is not the same in different compounds.

  4. All solutions of the Diophantine equation a^6+b^6=c^6+d^6+e^6+f^6+g^6 for a,b,c,d,e,f,g < 250000 found with a distributed Boinc project

    OpenAIRE

    Gerbicz, Robert; Meyrignac, Jean-Charles; Beckert, Uwe

    2011-01-01

    The above equation is also called as Euler(6,2,5) system. By computational aspect these systems are very interesting. And we can also apply these methods to other Diophantine equations. We give a brief history of these systems and how we searched for these big solutions on Boinc. Our two Boinc projects ran from April of 2010 to July of 2011.

  5. The nido-osmaboranes [2,2,2-(CO)(PPh(3))(2)-nido-2-OsB(5)H(9)] and [6,6,6-(CO)(PPh(3))(2)-nido-6-OsB(9)H(13)].

    Science.gov (United States)

    Bould, J; Kennedy, J D; Thomas, R L; Rath, N P; Barton, L

    2001-11-01

    The structural characterization of the osmahexaborane 2-carbonyl-2,2-bis(triphenylphosphine)-nido-2-osmahexaborane(9), [Os(B(5)H(9))(C(18)H(15)P)(2)(CO)], (I), a metallaborane analogue of B(6)H(10), confirms the structure proposed from NMR spectroscopy. The structure of the osmadecaborane 6-carbonyl-6,6-bis(triphenylphosphine)-nido-6-osmadecaborane(13), [Os(B(9)H(13))(C(18)H(15)P)(2)(CO)], (IV), is similarly confirmed. The short basal B-B distance of 1.652 (8) A in (I), not bridged by an H atom, mirrors that in the parent hexaborane(10) [1.626 (4) A].

  6. Design, synthesis and photoelectrochemical properties of hexagonal metallomacrocycles based on triphenylamine: [M6(4,4'-bis(2,2':6',2''-terpyridinyl)triphenylamine)6(X)12]; [M = Fe(II), PF6- and Zn(II), BF4-].

    Science.gov (United States)

    Hwang, Seok-Ho; Moorefield, Charles N; Wang, Pingshan; Fronczek, Frank R; Courtney, Brandy H; Newkome, George R

    2006-08-07

    Synthesis of a novel bis(terpyridine) ligand, 4,4'-bis(2,2':6',2''-terpyridinyl)triphenylamine, utilizing triphenylamine, as a specific angle controller, has led to the self-assembly of a unique hexagonal metallomacrocycle family, [Fe6(2)6(PF6)12] and [Zn6(2)6(BF4)12], utilizing terpyridine-metal(II)-terpyridine connectivity. The crystal structure of the novel ligand shows that the angle between the two terpyridinyl moieties is 119.69 degrees , which enabled the formation of the hexagonal-shaped macrocycles. The crystal packing architectures of this starting ligand revealed channels induced by solvent encapsulation. Following complexation of this ligand with transition metals [Fe(II) or Zn(II)] in a one-pot reaction, the resultant structures were characterized by (1)H and (13)C NMR, UV/Vis and mass spectroscopies. The expected metal-to-ligand charge transfer (MLCT; lambda(max) = 582 nm) and emission (lambda(em) = 575 nm) characteristics were exhibited by both [Fe6(2)6(PF6)12] and[Zn6(2)6(BF4)12]. The photoelectrochemical characteristics of these hexagonal metallomacrocycles demonstrate that they can be used as sensitizers in dye-sensitized solar cells.

  7. Chapter 6: Accidents

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2018-04-01

    Th chapter 6 presents the accidents of: 1) Stimos (Italy - May, 1975); 2) San Salvador (El Salvador - February 5, 1989); 3) Soreq (Israel - June 21, 1990); 4) Nesvizh (Belarus - October 26, 1991); 5) Illinois (USA - February, 1965); 6)Maryland (EUA - December 11, 1991); 7)Hanoi (Vietnam -November 17, 1992); 8)Fleurus (Belgium - March 11, 2006) and final remarks on accidents.

  8. Aespoe Task Force on modelling of groundwater flow and transport of solutes. Review of Tasks 6b, 6b and 6b

    Energy Technology Data Exchange (ETDEWEB)

    Hodgkinson, David [Quintessa, Henley-on-Thames (United Kingdom); Black, John [In Situ Solutions, East Bridgford (United Kingdom)

    2005-03-01

    This report forms part of an independent review of the specifications, execution and results of Task 6 of the Aespoe Task Force on Modelling of Groundwater Flow and Transport of Solutes, which is seeking to provide a bridge between site characterization and performance assessment approaches to solute transport in fractured rock. The present report is concerned solely with Tasks 6b, 6b and 6b which relate to the transport of tracers on a 5-metre scale in Feature A at the TRUE-1 site. The task objectives, specifications and individual modelling team results are summarised and reviewed, and an evaluation of the overall exercise is presented. The report concludes with assessments of what has been learnt, the implications for the Task 6 objectives, and some possible future directions.

  9. m6aViewer: software for the detection, analysis, and visualization of N6-methyladenosine peaks from m6A-seq/ME-RIP sequencing data.

    Science.gov (United States)

    Antanaviciute, Agne; Baquero-Perez, Belinda; Watson, Christopher M; Harrison, Sally M; Lascelles, Carolina; Crinnion, Laura; Markham, Alexander F; Bonthron, David T; Whitehouse, Adrian; Carr, Ian M

    2017-10-01

    Recent methods for transcriptome-wide N 6 -methyladenosine (m 6 A) profiling have facilitated investigations into the RNA methylome and established m 6 A as a dynamic modification that has critical regulatory roles in gene expression and may play a role in human disease. However, bioinformatics resources available for the analysis of m 6 A sequencing data are still limited. Here, we describe m6aViewer-a cross-platform application for analysis and visualization of m 6 A peaks from sequencing data. m6aViewer implements a novel m 6 A peak-calling algorithm that identifies high-confidence methylated residues with more precision than previously described approaches. The application enables data analysis through a graphical user interface, and thus, in contrast to other currently available tools, does not require the user to be skilled in computer programming. m6aViewer and test data can be downloaded here: http://dna2.leeds.ac.uk/m6a. © 2017 Antanaviciute et al.; Published by Cold Spring Harbor Laboratory Press for the RNA Society.

  10. Corrosion of carbon steel in the [P_1_4_6_6_6][Br] ionic liquid: The effects of γ-radiation and cover gas

    International Nuclear Information System (INIS)

    Morco, Ryan P.; Musa, Ahmed Y.; Momeni, Mojtaba; Wren, J.C.

    2016-01-01

    Highlights: • Carbon steel corrosion in non-aqueous ionic liquid ([P_1_4_6_6_6] [Br]) electrolyte. • Gamma-irradiation results to less corrosion, forming protective oxides. • Substantial corrosion is seen in the absence of gamma-radiation. • A corrosion mechanism is proposed for the observed results. - Abstract: The corrosion of carbon steel in the ionic liquid (IL) [P_1_4_6_6_6] [Br] was studied with the IL in contact with an inert (Ar) or oxidizing (air) cover gas in the presence and absence of γ-radiation. Significant corrosion was observed for the tests performed in the absence of γ-radiation while a protective oxide layer is formed in the presence of γ-radiation. The corrosion is attributed to the presence of impurity H_2O and O_2 dissolved in the IL, and a corrosion mechanism is proposed.

  11. Performance of 6FDA–6FpDA polyimide for propylene/propane separations

    KAUST Repository

    Das, Mita; Koros, William J.

    2010-01-01

    This work addresses the challenges faced by previous researchers with 6FDA-6FpDA polyimide for propylene/propane separations due to plasticization. A study of film annealing temperature is reported to optimize plasticization suppression in elevated

  12. Glucose-6-phosphate dehydrogenase (G6PD mutations and haemoglobinuria syndrome in the Vietnamese population

    Directory of Open Access Journals (Sweden)

    Day Nick

    2009-07-01

    Full Text Available Abstract Background In Vietnam the blackwater fever syndrome (BWF has been associated with malaria infection, quinine ingestion and G6PD deficiency. The G6PD variants within the Vietnamese Kinh contributing to the disease risk in this population, and more generally to haemoglobinuria, are currently unknown. Method Eighty-two haemoglobinuria patients and 524 healthy controls were screened for G6PD deficiency using either the methylene blue reduction test, the G-6-PDH kit or the micro-methaemoglobin reduction test. The G6PD gene variants were screened using SSCP combined with DNA sequencing in 82 patients with haemoglobinuria, and in 59 healthy controls found to be G6PD deficient. Results This study confirmed that G6PD deficiency is strongly associated with haemoglobinuria (OR = 15, 95% CI [7.7 to 28.9], P G6PD variants were identified in the Vietnamese population, of which two are novel (Vietnam1 [Glu3Lys] and Vietnam2 [Phe66Cys]. G6PD Viangchan [Val291Met], common throughout south-east Asia, accounted for 77% of the variants detected and was significantly associated with haemoglobinuria within G6PD-deficient ethnic Kinh Vietnamese (OR = 5.8 95% CI [114-55.4], P = 0.022. Conclusion The primary frequency of several G6PD mutations, including novel mutations, in the Vietnamese Kinh population are reported and the contribution of G6PD mutations to the development of haemoglobinuria are investigated.

  13. Analysis of PTA hardfacing with CoCrWC and CoCrMoSi alloys

    Directory of Open Access Journals (Sweden)

    Adriano Scheid

    2013-12-01

    Full Text Available CoCrWC alloys are widely used to protect components that operate under wear and high temperature environments. Enhanced performance has been achieved with the CoCrMoSi alloys but processing this alloy system is still a challenge due to the presence of the brittle Laves phase, particularly when welding is involved. This work evaluated Plasma Transferred Arc coatings processed with the Co-based alloy CoMoCrSi - Tribaloy T400, reinforced with Laves phase, comparing its weldability to the CoCrWC - Stellite 6, reinforced with carbides. Coatings were also analyzed regarding the response to temperature exposure at 600°C for 7 days and subsequent effect on microstructure and sliding abrasive wear. Coatings characterization was carried out by light and scanning electron microscopy, X-ray diffraction and Vickers hardness. CoCrWC coatings exhibited a Cobalt solid solution dendritic microstructure and a thin interdendritic region with eutectic carbides, while CoCrMoSi deposits exhibit a large lamellar eutectic region of Laves phase and Cobalt solid solution and a small fraction of primary Laves phase. Although phase stability was observed by X-ray diffraction, coarsening of the microstructure occurred for both alloys. CoCrMoSi showed thicker lamellar Laves phase and CoCrWC coarser eutectic carbides. Coatings stability assessed by wear tests revealed that although the wear rate of the as-deposited CoCrMoSi alloy was lower than that of CoCrWC alloy its increase after temperature exposure was more significant, 22% against 15%. Results were discussed regarding the protection of industrial components in particular, bearings in 55AlZn hot dip galvanizing components.

  14. Control rod upper pin and roller removal and replacement

    International Nuclear Information System (INIS)

    Giordano, B.

    1995-01-01

    There has been increasing utility interest in removing cobalt sources as a means to minimize dose rates and shipping costs associated with operations, maintenance, shipping and radioactive waste disposal. This activation product accounts for approximately 80% of the dose rates at a plant. Estimates suggest that older (original equipment) control rod blades (CRBs) using stellite rollers and Haynes Alloy 25 pins can contribute as much as 43% of the cobalt in the plant. Since CRBs are the most concentrated source of cobalt in the reactor vessel, pin and roller (P ampersand R) replacement will provide significant reductions in cobalt-60 levels. The reductions will be measurable within 2 years, and should plateau within 5 to 6 years. This paper described a new, simple, cost effective, field proven in-situ method to replace these high source term contributing components and return the CRB to the reactor core for continued service. The paper also briefly describes a methodology that has been developed to estimate the labor and material costs along with a man-rem dollar savings for removal of the upper P ampersand Rs from in-service CRBs purchased prior to 1982. This method permits comparison to the cost of early replacement of CRBs. The result of this study is an EXCEL spreadsheet cost/benefit analysis that can be made plant specific by incorporation of plant data. The Analysis shows that the removal of P ampersand Rs can be beneficial for a Co-60 contribution as low as 5-10%. Recent interest by non-utility radioactive material users in obtaining the removed P ampersand Rs may further increase the benefit and reduce the cost associated with in-situ removal

  15. Complexities in human herpesvirus-6A and -6B binding to host cells

    DEFF Research Database (Denmark)

    Pedersen, Simon Metz; Höllsberg, Per

    2006-01-01

    Human herpesvirus-6A and -6B uses the cellular receptor CD46 for fusion and infection of the host cell. The viral glycoprotein complex gH-gL from HHV-6A binds to the short consensus repeat 2 and 3 in CD46. Although all the major isoforms of CD46 bind the virus, certain isoforms may have higher...

  16. Discovery of a cyclic 6 + 6 hexamer of d-biotin and formaldehyde

    DEFF Research Database (Denmark)

    Lisbjerg, Micke; Jessen, Bo M.; Rasmussen, Brian

    2014-01-01

    The discovery of receptors using templated synthesis enables the selection of strong receptors from complex mixtures. In this contribution we describe a study of the condensation of d-biotin and formaldehyde in acidic water. We have discovered that halide anions template the formation of a single...... isomer of a 6 + 6 macrocycle. The macrocycle (biotin[6]uril) is water-soluble, chiral and binds halide anions (iodide, bromide and chloride) with selectivity for iodide in water, and it can be isolated on a gram scale in a one-pot reaction in 63% yield....

  17. No-carrier-added (NCA) synthesis of 6-[{sup 18}F]fluoro-L-DOPA using 3,5,6,7,8,8a-hexahydro-7,7,8a-trimethyl-[6S-(6{alpha}, 8{alpha}, 8{alpha}{beta})]-6,8-methano-2H-1,4-benzoxazin-2-one

    Energy Technology Data Exchange (ETDEWEB)

    Horti, A. [Yale Univ., New Haven, CT (United States). School of Medicine]|[Yale Univ., West Haven, CT (United States). PET Center; Redmond, D.E. Jr. [Yale Univ., New Haven, CT (United States). School of Medicine; Soufer, R. [Yale Univ., West Haven, CT (United States). PET Center

    1995-12-31

    3,5,6,7,8,8a-Hexahydro-7,7,8a-trimethyl-[6S-(6{alpha},8{alpha} , 8{alpha}{beta})]-6,8-methano-2H-1,4-benzoxazino-2-one (2) was investigated as chiral auxiliary for asymmetric NCA nucleophilic synthesis of 6-[{sup 18}F]Fluoro-L-DOPA. Direct condensation of 3,4-dimethoxy-2-[{sup 18}F]fluorobenzaldehyde (1a) or 6-[{sup 18}F]fluoro-piperonal (1b) in the presence of NaH with 2 gave the corresponding [{sup 18}F]-3-[(2-fluorophenyl)methylene]-3,5,6,7,8,8a-hexahydro-7,7,8 a-trimethyl-[6S-(3Z,3{alpha},6{alpha},8{alpha},8{alpha}{beta})]-6, 8-methano-2H-1,4-benzoxazin-2-one derivative 3a or 3b as a single stereoisomer. L-Selectride promoted hydrogenation of the olefinic double bond of these derivatives, in presence of tertbutyl alcohol, afforded the corresponding [{sup 18}F]-3-[(2-fluorophenyl) methyl]-3,5,6,7,8,8a-hexahydro-7,7,8a-trimethyl-[3S-(3{alpha}, 6{alpha}, 8{alpha}8{alpha}{beta})]-6,8-methano-2H-1,4-benzoxazin-2-one derivatives (4a,b) without affecting the orientation of diasterofacial discrimination. Deprotection of the derivatives 4a,b yielded 6-[{sup 18}F]fluoro-L-DOPA (e.e. >90%, 3% radiochemical yield (EOB), total synthesis time 125 min, specific activity >2000 mCi/{mu}mol). Direct deprotection/reduction of the compounds 3a,b provides the enantiomeric mixture of 6-[{sup 18}F]fluoro-D,L-DOPA (10-12% radiochemical yield) and, after chiral separation, 6-[{sup 18}F]fluoro-L-DOPA (e.e. 98%, 4-5% radiochemical yield). (author).

  18. Increased expression of interleukin-6 (IL-6) gene transcript in relation to IL-6 promoter hypomethylation in gingival tissue from patients with chronic periodontitis.

    Science.gov (United States)

    Kobayashi, Tetsuo; Ishida, Kohei; Yoshie, Hiromasa

    2016-09-01

    DNA methylation of the cytokine genes may play a role in the pathogenesis of periodontitis. The aim of this study is to evaluate whether the alteration of interleukin-6 (IL-6) gene promoter methylation in the gingival tissue (GT) and peripheral blood (PB) is unique to chronic periodontitis (CP). DNA isolated from the GT and PB of 25 patients with (CP) and 20 healthy controls (H) was modified with sodium bisulfite and analyzed for IL-6 promoter methylation with direct sequencing. The levels of IL-6 mRNA and serum IL-6 protein were evaluated by a quantitative reverse transcription polymerase chain reaction and an enzyme-linked immunosorbent assay. The CP group showed that the overall methylation rates of IL-6 promoter that contained 19 cytosine-guanine dinucleotide (CpG) motifs were significantly decreased in GT in comparison to PB (p<0.001), which was significantly negatively correlated with the probing depth (p=0.003). The GT and PB of the H group displayed similar overall methylation rates. No significant difference was observed in the methylation rates at each CpG in GT in comparison to the PB in both groups. The levels of IL-6 mRNA in the GT and PB and serum IL-6 of the two groups were comparable. The ratio of IL-6 mRNA in the GT relative to the PB was significantly higher in the CP group than in the H group (p=0.03). The increased expression of IL-6 gene transcription may be related to IL-6 promoter hypomethylation in the GT from CP patients. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Konsep Tingkat Kematangan penerapan Internet Protokol versi 6 (Capability Maturity Model for IPv6 Implementation

    Directory of Open Access Journals (Sweden)

    Riza Azmi

    2015-03-01

    Full Text Available Internet Protocol atau IP merupakan standar penomoran internet di dunia yang jumlahnya terbatas. Di dunia, alokasi IP diatur oleh Internet Assignd Number Authority (IANA dan didelegasikan ke melalui otoritas masing-masing benua. IP sendiri terdiri dari 2 jenis versi yaitu IPv4 dan IPv6 dimana alokasi IPv4 dinyatakan habis di tingkat IANA pada bulan April 2011. Oleh karena itu, penggunaan IP diarahkan kepada penggunaan IPv6. Untuk melihat bagaimana kematangan suatu organisasi terhadap implementasi IPv6, penelitian ini mencoba membuat sebuah model tingkat kematangan penerapan IPv6. Konsep dasar dari model ini mengambil konsep Capability Maturity Model Integrated (CMMI, dengan beberapa tambahan yaitu roadmap migrasi IPv6 di Indonesia, Request for Comment (RFC yang terkait dengan IPv6 serta beberapa best-practice implementasi dari IPv6. Dengan konsep tersebut, penelitian ini menghasilkan konsep Capability Maturity for IPv6 Implementation.

  20. 7 CFR 500.6 - Gambling.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Gambling. 500.6 Section 500.6 Agriculture Regulations... NATIONAL ARBORETUM Conduct on U.S. National Arboreturm Property § 500.6 Gambling. Participating in games for money or other personal property, or the operation of gambling devices, the conduct of a lottery...

  1. IL-6 Improves Energy and Glucose Homeostasis in Obesity via Enhanced Central IL-6 trans-Signaling.

    Science.gov (United States)

    Timper, Katharina; Denson, Jesse Lee; Steculorum, Sophie Marie; Heilinger, Christian; Engström-Ruud, Linda; Wunderlich, Claudia Maria; Rose-John, Stefan; Wunderlich, F Thomas; Brüning, Jens Claus

    2017-04-11

    Interleukin (IL)-6 engages similar signaling mechanisms to leptin. Here, we find that central application of IL-6 in mice suppresses feeding and improves glucose tolerance. In contrast to leptin, whose action is attenuated in obesity, the ability of IL-6 to suppress feeding is enhanced in obese mice. IL-6 suppresses feeding in the absence of neuronal IL-6-receptor (IL-6R) expression in hypothalamic or all forebrain neurons of mice. Conversely, obese mice exhibit increased soluble IL-6R levels in the cerebrospinal fluid. Blocking IL-6 trans-signaling in the CNS abrogates the ability of IL-6 to suppress feeding. Furthermore, gp130 expression is enhanced in the paraventricular nucleus of the hypothalamus (PVH) of obese mice, and deletion of gp130 in the PVH attenuates the beneficial central IL-6 effects on metabolism. Collectively, these experiments indicate that IL-6 trans-signaling is enhanced in the CNS of obese mice, allowing IL-6 to exert its beneficial metabolic effects even under conditions of leptin resistance. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  2. IL-6 Improves Energy and Glucose Homeostasis in Obesity via Enhanced Central IL-6 trans-Signaling

    Directory of Open Access Journals (Sweden)

    Katharina Timper

    2017-04-01

    Full Text Available Interleukin (IL-6 engages similar signaling mechanisms to leptin. Here, we find that central application of IL-6 in mice suppresses feeding and improves glucose tolerance. In contrast to leptin, whose action is attenuated in obesity, the ability of IL-6 to suppress feeding is enhanced in obese mice. IL-6 suppresses feeding in the absence of neuronal IL-6-receptor (IL-6R expression in hypothalamic or all forebrain neurons of mice. Conversely, obese mice exhibit increased soluble IL-6R levels in the cerebrospinal fluid. Blocking IL-6 trans-signaling in the CNS abrogates the ability of IL-6 to suppress feeding. Furthermore, gp130 expression is enhanced in the paraventricular nucleus of the hypothalamus (PVH of obese mice, and deletion of gp130 in the PVH attenuates the beneficial central IL-6 effects on metabolism. Collectively, these experiments indicate that IL-6 trans-signaling is enhanced in the CNS of obese mice, allowing IL-6 to exert its beneficial metabolic effects even under conditions of leptin resistance.

  3. Mechanisms of emission of particles charged in 6Li + 6Li and 6Li + 10B reactions at low energies

    International Nuclear Information System (INIS)

    Quebert, Jean

    1964-01-01

    The lithium 6 nucleus is a projectile of interest to study nuclear reactions at low energy due to the possibility to obtain high heats of reaction, and to its structure which can play an important role in the projectile-target interaction. This research thesis focused on the study of two low-energy reactions provoked by lithium projectiles. These reactions are studied within the framework of the theoretical model of aggregates. The first part presents the experimental conditions of both reactions, reports the development and analysis of nuclear plates, and the transformation of a given type of particle histogram into a spectrum in the mass centre system. The next parts report the study of the 6 Li + 6 Li reaction (previous results, kinematic analysis, spectrum of secondary particles, theoretical analysis of results) and of the 6 Li + 10 B reaction (previous results, experimental results, study of the continuous spectrum of alpha particle, reaction mechanisms)

  4. 7 CFR 501.6 - Gambling.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Gambling. 501.6 Section 501.6 Agriculture Regulations... CONDUCT ON U.S. MEAT ANIMAL RESEARCH CENTER, CLAY CENTER, NEBRASKA § 501.6 Gambling. Participating in games for money or other personal property, or the operation of gambling devices, the conduct of a...

  5. 32 CFR 1657.6 - Transportation.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Transportation. 1657.6 Section 1657.6 National... PROCESSING § 1657.6 Transportation. (a) The Director shall furnish transportation for an overseas registrant... transportation from the place he reported for induction to the place to which his order to report for induction...

  6. Study of the ionizing radiation effect on the polyamide 6,6 mechanical properties

    International Nuclear Information System (INIS)

    Colombo, Maria Aparecida da Silva

    2004-01-01

    Polyamide 6,6 due to its excellent mechanical, thermal and electrical properties and its great performance in multiple industrial applications is considered one of the most important engineering polymers. However, in specific applications, some of its properties need to be improved by means additives or fillers to reach the required properties increasing its final cost. By these considerations, the aim of this work was to apply the ionizing radiation to improve the natural mechanical properties of polyamide 6,6. Also, to evaluate the irradiation parameters, and the mechanical performance of the irradiated polymer in order to use the cross-linking, induced by ionizing radiation, as substitute of additives and fillers. Row polyamide 6,6 samples, for mechanical tests, were prepared by injection molded and then irradiated with high energetic electrons to reach doses of 70, 100, 150, and 200 kGy. The mechanical performance, of non-irradiated and irradiated samples, was evaluated by tensile strength, impact, hardness and wear measurements. Furthermore, hardness and wear tests were carried out with samples, which were immersed in petroleum and sea water for 6 months. The experimental results have shown that, in the studied dose range, the tensile strength increases 25%, the hardness Shore D 15%, the impact values diminished by 80% and the wear values decreased 20 times between 0 and 200 kGy. The effect of the petroleum and sea water were shown mainly in the nonirradiated samples. (author)

  7. Theoretical investigation of structure and stability of molecules of borohydrides B2H6, AlBH6 and ScBH6

    International Nuclear Information System (INIS)

    Musaev, D.G.; Zyubin, A.S.; Charkin, O.P.; Bonakkorsi, R.; Tomazi, Ya.

    1988-01-01

    Geometry of alternative structures of M 3+ BH 6 molecules are optimized on the two-exponent bases; their energies are refined with a fuller basis DEHD taking into account electron correlation within the frames of the MP3 method. The tendencies in the change of relative energies of the structures and their stability to decomposition are analyzed. It is noted that AlBH 6 and ScBH 6 molecules are not rigid to migration of M 3+ H 2 + ''cation'' round BH 4 - anion, as well ScBH 6 molecules are flexible to rotation of H 2 Sc group round the Sc-B axis. The data are compared with the results of previous similar calculations of borohydrides of elements in the first two groups (Li-Cu and Be-Zn)

  8. Plot 6

    DEFF Research Database (Denmark)

    Lund, Inger-Lise; Ferdinand, Trine; Abildgaard, Stina

    Elevbogen indeholder 6 kapitler. Kapitlernes indhold kommer rundt i hele danskfaget med forskellige vinkler, og elevernes læring udspringer af kompetenceområderne: læsning, fremstilling, fortolkning og kommunikation...

  9. 40 CFR 164.6 - Time.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Time. 164.6 Section 164.6 Protection... OTHER HEARINGS CALLED PURSUANT TO SECTION 6 OF THE ACT General § 164.6 Time. (a) Computation. In computing any period of time prescribed or allowed by these rules, except as otherwise provided, the day of...

  10. HGSYSTEMUF6, Simulating Dispersion Due to Atmospheric Release of Uranium Hexafluoride (UF6)

    International Nuclear Information System (INIS)

    Hanna, G; Chang, J.C.; Zhang, J.X.; Bloom, S.G.; Goode, W.D. Jr; Lombardi, D.A.; Yambert, M.W.

    2001-01-01

    1 - Description of program or function: HGSYSTEMUF6 is a suite of models designed for use in estimating consequences associated with accidental, atmospheric release of Uranium Hexafluoride (UF 6 ) and its reaction products, namely Hydrogen Fluoride (HF), and other non-reactive contaminants which are either negatively, neutrally, or positively buoyant. It is based on HGSYSTEM Version 3.0 of Shell Research LTD., and contains specific algorithms for the treatment of UF 6 chemistry and thermodynamics. HGSYSTEMUF6 contains algorithms for the treatment of dense gases, dry and wet deposition, effects due to the presence of buildings (canyon and wake), plume lift-off, and the effects of complex terrain. The models components of the suite include (1) AEROPLUME/RK, used to model near-field dispersion from pressurized two-phase jet releases of UF6 and its reaction products, (2) HEGADAS/UF6 for simulating dense, ground based release of UF 6 , (3) PGPLUME for simulation of passive, neutrally buoyant plumes (4) UF6Mixer for modeling warm, potentially reactive, ground-level releases of UF 6 from buildings, and (5) WAKE, used to model elevated and ground-level releases into building wake cavities of non-reactive plumes that are either neutrally or positively buoyant. 2 - Methods: The atmospheric release and transport of UF 6 is a complicated process involving the interaction between dispersion, chemical and thermodynamic processes. This process is characterized by four separate stages (flash, sublimation, chemical reaction entrainment and passive dispersion) in which one or more of these processes dominate. The various models contained in the suite are applicable to one or more of these stages. For example, for modeling reactive, multiphase releases of UF 6 , the AEROPLUME/RK component employs a process-splitting scheme which numerically integrates the differential equations governing dispersion, UF 6 chemistry, and thermodynamics. This algorithm is based on the assumption that

  11. Antibacterial Properties of Functional Polyamide 6.6

    Directory of Open Access Journals (Sweden)

    El Bouchti Mehdi

    2014-06-01

    Full Text Available Polyamide 6.6 multifilaments are grafted with the monomer N-allyliminodiacetic acid for the purpose of removal of some heavy metal ions from their aqueous solutions by forming its metal chelate especially with Ag+ ion. Such a fibrous chelate-forming resin has been used with success due to its large surface area, which contains an important metal chelate-forming functional group, where metal ions are adsorbed or desorbed on its surface, and therefore having an improved adsorption and desorption capability. In previous work, chelate-forming fibre was characterised by ICP-AES analysis according to the digestion method by microwave. The antibacterial activity of the prepared fibre is investigated with Escherichia coli bacteria as reference, according to the zone of inhibition method in agar medium. The material used as reference without metal does not present any effect on E. coli. However, the chelateforming fibres with Ag+ have a strong bactericidal effect, even with a low concentration of silver ions. These modified materials can be used as highly effective bactericidal composites that may be used in future applications for the production of antimicrobial textiles, papers or polymer materials

  12. 6. Seminar of the IIE-ININ-IMP on technological specialties. Topic 6: environmental contamination

    International Nuclear Information System (INIS)

    1992-01-01

    The document includes 10 papers presented at the 6. Seminar of the IIE-ININ-IMP on technological specialities in the field of environmental contamination (Topic 6). From these, 6 papers were in INIS subject scope and a separate abstract was prepared for each of these papers

  13. Syntheses of bar 6-2H bar-indole, bar 6-2H bar-gramine and bar 6-3H bar-gramine

    International Nuclear Information System (INIS)

    Ghini, A.A.; Burton, G.; Gros, E.G.

    1986-01-01

    The title compounds were obtained from the corresponding 6-bromo derivatives by conversion to the 1,6-dilithio-compounds followed by treatment with deuteriated or tritiated water and exchange of the 1-deuterium or tritium with water. (author)

  14. Poly[(6-carboxypicolinato-κ3O2,N,O6(μ3-pyridine-2,6-dicarboxylato-κ5O2,N,O6:O2′:O6′dysprosium(III

    Directory of Open Access Journals (Sweden)

    Xu Li

    2009-11-01

    Full Text Available In the title complex, [Dy(C7H3NO4(C7H4NO4]n, one of the ligands is fully deprotonated while the second has lost only one H atom. Each DyIII ion is coordinated by six O atoms and two N atoms from two pyridine-2,6-dicarboxylate and two 6-carboxypicolinate ligands, displaying a bicapped trigonal-prismatic geometry. The average Dy—O bond distance is 2.40 Å, some 0.1Å longer than the corresponding Ho—O distance in the isotypic holmium complex. Adjacent DyIII ions are linked by the pyridine-2,6-dicarboxylate ligands, forming a layer in (100. These layers are further connected by π–π stacking interactions between neighboring pyridyl rings [centroid–centroid distance = 3.827 (3 Å] and C—H...O hydrogen-bonding interactions, assembling a three-dimensional supramolecular network. Within each layer, there are other π–π stacking interactions between neighboring pyridyl rings [centroid–centroid distance = 3.501 (2 Å] and O—H...O and C—H...O hydrogen-bonding interactions, which further stabilize the structure.

  15. Structural phase transitions of NaV6O11 and SrV6O11

    International Nuclear Information System (INIS)

    Kanke, Yasushi; Izumi, Fujio; Kato, Katsuo; Morii, Yukio; Funahashi, Satoru; Akiba, Etsuo.

    1993-01-01

    Crystal structures of NaV 6 O 11 at several temperatures were studied by either Rietveld analyses of both neutron and X-ray powder diffraction data, or an analysis of X-ray single crystal diffraction data. At 200 K, NaV 6 O 11 loses the center of symmetry, and its space group changes from P6 3 /mmc to P6 3 mc. Consequently, V(2) splits into two sites. At 30 K, NaV 6 O 11 was transformed from the hexagonal form to the orthorhombic one (Cmc2 1 ), and V(1) splits into two sites. These results indicate that magnetic phase transitions of NaV 6 O 11 at 245 K and 64.2 K are accompanied by structural phase transitions. On the other hand, no structural phase transition was detected in SrV 6 O 11 . (author)

  16. Aespoe Task Force on modelling of groundwater flow and transport of solutes. Review of Tasks 6A, 6B and 6B2

    International Nuclear Information System (INIS)

    Hodgkinson, David; Black, John

    2005-03-01

    This report forms part of an independent review of the specifications, execution and results of Task 6 of the Aespoe Task Force on Modelling of Groundwater Flow and Transport of Solutes, which is seeking to provide a bridge between site characterization and performance assessment approaches to solute transport in fractured rock. The present report is concerned solely with Tasks 6b, 6b and 6b which relate to the transport of tracers on a 5-metre scale in Feature A at the TRUE-1 site. The task objectives, specifications and individual modelling team results are summarised and reviewed, and an evaluation of the overall exercise is presented. The report concludes with assessments of what has been learnt, the implications for the Task 6 objectives, and some possible future directions

  17. Figure6

    Data.gov (United States)

    U.S. Environmental Protection Agency — R script for the reproduction of Figure6. This script accesses archived CMAQ and WRF model output on US EPA's HPC sol computer system and plots forward trajectories...

  18. The H_6_0Si_6C_5_4 heterofullerene as high-capacity hydrogen storage medium

    International Nuclear Information System (INIS)

    Yong, Yongliang; Zhou, Qingxiao; Li, Xiaohong; Lv, Shijie

    2016-01-01

    With the great success in Si atoms doped C_6_0 fullerene and the well-established methods for synthesis of hydrogenated carbon fullerenes, this leads naturally to wonder whether Si-doped fullerenes are possible for special applications such as hydrogen storage. Here by using first-principles calculations, we design a novel high-capacity hydrogen storage material, H_6_0Si_6C_5_4 heterofullerene, and confirm its geometric stability. It is found that the H_6_0Si_6C_5_4 heterofullerene has a large HOMO-LUMO gap and a high symmetry, indicating it is high chemically stable. Further, our finite temperature simulations indicate that the H_6_0Si_6C_5_4 heterofullerene is thermally stable at 300 K. H_2 molecules would enter into the cage from the Si-hexagon ring because of lower energy barrier. Through our calculation, a maximum of 21 H_2 molecules can be stored inside the H_6_0Si_6C_5_4 cage in molecular form, leading to a gravimetric density of 11.11 wt% for 21H_2@H_6_0Si_6C_5_4 system, which suggests that the hydrogenated Si_6C_5_4 heterofullerene could be suitable as a high-capacity hydrogen storage material.

  19. The thiopurine nucleoside analogue 6-methylmercaptopurine riboside (6MMPr) effectively blocks Zika virus replication.

    Science.gov (United States)

    de Carvalho, Otavio Valério; Félix, Daniele Mendes; de Mendonça, Leila Rodrigues; de Araújo, Catarina Maria Cataldi Sabino; de Oliveira Franca, Rafael Freitas; Cordeiro, Marli Tenório; Silva Júnior, Abelardo; Pena, Lindomar José

    2017-12-01

    Since the emergence of Zika virus (ZIKV) in Brazil in 2015, 48 countries and territories in the Americas have confirmed autochthonous cases of disease caused by the virus. ZIKV-associated neurological manifestations and congenital defects make the development of safe and effective antivirals against ZIKV of utmost importance. Here we evaluated the antiviral activity of 6-methylmercaptopurine riboside (6MMPr), a thiopurine nucleoside analogue derived from the prodrug azathioprine, against the epidemic ZIKV strain circulating in Brazil. In all of the assays, an epithelial (Vero) and a human neuronal (SH-SY5Y) cell line were used to evaluate the cytotoxicity and effective concentrations of 6MMPr against ZIKV. Levels of ZIKV-RNA, viral infectious titre and the percentage of infected cells in the presence or absence of 6MMPr were used to determine antiviral efficacy. 6MMPr decreased ZIKV production by >99% in both cell lines in a dose- and time-dependent manner. Interestingly, 6MMPr was 1.6 times less toxic to SH-SY5Y cells compared with Vero cells, presenting a 50% cytotoxic concentrations (CC 50 ) of 460.3 µM and 291 µM, respectively. The selectivity index of 6MMPr for Vero and SH-SY5Y cells was 11.9 and 22.7, respectively, highlighting the safety profile of the drug to neuronal cells. Taken together, these results identify, for the first time, the thiopurine nucleoside analogue 6MMPr as a promising antiviral candidate against ZIKV that warrants further in vivo evaluation. Copyright © 2017 Elsevier B.V. and International Society of Chemotherapy. All rights reserved.

  20. Do cysteine residues regulate transient receptor potential canonical type 6 (TRPC6) channel protein expression?

    DEFF Research Database (Denmark)

    Thilo, Florian; Liu, Ying; Krueger, Katharina

    2012-01-01

    The regulation of calcium influx through transient receptor potential canonical type 6 channel is mandatory for the activity of human monocytes. We submit the first evidence that cysteine residues of homocysteine or acetylcysteine affect TRPC6 expression in human monocytes. We observed that patie......The regulation of calcium influx through transient receptor potential canonical type 6 channel is mandatory for the activity of human monocytes. We submit the first evidence that cysteine residues of homocysteine or acetylcysteine affect TRPC6 expression in human monocytes. We observed...... that patients with chronic renal failure had significantly elevated homocysteine levels and TRPC6 mRNA expression levels in monocytes compared to control subjects. We further observed that administration of homocysteine or acetylcysteine significantly increased TRPC6 channel protein expression compared...... to control conditions. We therefore hypothesize that cysteine residues increase TRPC6 channel protein expression in humans....

  1. Glucose 6 phosphatase dehydrogenase (G6PD and neurodegenerative disorders: Mapping diagnostic and therapeutic opportunities

    Directory of Open Access Journals (Sweden)

    Manju Tiwari

    2017-12-01

    Full Text Available Glucose 6 phosphate dehydrogenase (G6PD is a key and rate limiting enzyme in the pentose phosphate pathway (PPP. The physiological significance of enzyme is providing reduced energy to specific cells like erythrocyte by maintaining co-enzyme nicotinamide adenine dinucleotide phosphate (NADPH. There are preponderance research findings that demonstrate the enzyme (G6PD role in the energy balance, and it is associated with blood-related diseases and disorders, primarily the anemia resulted from G6PD deficiency. The X-linked genetic deficiency of G6PD and associated non-immune hemolytic anemia have been studied widely across the globe. Recent advancement in biology, more precisely neuroscience has revealed that G6PD is centrally involved in many neurological and neurodegenerative disorders. The neuroprotective role of the enzyme (G6PD has also been established, as well as the potential of G6PD in oxidative damage and the Reactive Oxygen Species (ROS produced in cerebral ischemia. Though G6PD deficiency remains a global health issue, however, a paradigm shift in research focusing the potential of the enzyme in neurological and neurodegenerative disorders will surely open a new avenue in diagnostics and enzyme therapeutics. Here, in this study, more emphasis was made on exploring the role of G6PD in neurological and inflammatory disorders as well as non-immune hemolytic anemia, thus providing diagnostic and therapeutic opportunities.

  2. TbNb6Sn6: the first ternary compound from the rare earth–niobium–tin system

    Directory of Open Access Journals (Sweden)

    Viktor Hlukhyy

    2010-12-01

    Full Text Available The title compound, terbium hexaniobium hexastannide, TbNb6Sn6, is the first ternary compound from the rare earth–niobium–tin system. It has the HfFe6Ge6 structure type, which can be analysed as an intergrowth of the Zr4Al3 and CaCu5 structures. All the atoms lie on special positions; their coordination geometries and site symmetries are: Tb (dodecahedron 6/mmm; Nb (distorted icosahedron 2mm; Sn (Frank–Caspar polyhedron, CN = 14–15 6mm and overline{6}m2; Sn (distorted icosahedron overline{6}m2. The structure contains a graphite-type Sn network, Kagome nets of Nb atoms, and Tb atoms alternating with Sn2 dumbbells in the channels.

  3. Enhanced candu 6 reactor: status

    International Nuclear Information System (INIS)

    Azeez, S.; Girouard, P.

    2006-01-01

    The CANDU 6 power reactor is visionary in its approach, renowned for its on-power refuelling capability and proven over years of safe, economical and reliable power production. Developed by Atomic Energy of Canada Limited (AECL), the CANDU 6 design offers excellent performance utilizing state-of-the-art technology. The first CANDU 6 plants went into service in the early 1980s as leading edge technology and the design has been continuously advanced to maintain superior performance with an outstanding safety record. The first set of CANDU 6 plants - Gentilly 2 and Point Lepreau in Canada, Embalse in Argentina and Wolsong- Unit 1 in Korea - have been in service for more than 22 years and are still producing electricity at peak performance; to the end of 2004, their average Lifetime Capacity Factor was 83.2%. The newer CANDU 6 units in Romania (Cernavoda 1), Korea (Wolsong-Units 2, 3 and 4) and Qinshan (Phase III- Units 1 and 2) have also been performing at outstanding levels. The average lifetime Capacity Factor of the 10 CANDU 6 operating units around the world has been 87% to the end of 2004. Building on these successes, AECL is committed to the further development of this highly successful design, now focussing on meeting customers' needs for reduced costs, further improvements to plant operation and performance, enhanced safety and incorporating up-to-date technology, as warranted. This has resulted in AECL embarking on improving the CANDU 6 design through an upgraded product termed the ''Enhanced CANDU 6'' (EC6), which incorporates several attractive but proven features that make the CANDU 6 reactor even more economical, safer and easier to operate. Some of the key features that are being incorporated into the EC6 include increasing the plant's power output, shortening the overall project schedule, decreasing the capital cost, dealing with obsolescence issues, optimizing maintenance outages and incorporating lessons learnt through feedback obtained from the

  4. Effect of quercetin and desferrioxamine on 6-hydroxydopamine (6-OHDA) induced neurotoxicity in striatum of rats.

    Science.gov (United States)

    Haleagrahara, Nagaraja; Siew, Cheng Jun; Ponnusamy, Kumar

    2013-02-01

    The catecholaminergic neurotoxin 6-hydroxydopamine is used to lesion dopaminergic pathways in the experimental animal models of Parkinson's disease. The present study was aimed to evaluate the combined treatment with bioflavonoid quercetin (QN) and desferrioxamine (DFO) on 6-hydroxydopamine (6-OHDA) - induced neurotoxicity in the striatum of rats. Adult, male Sprague - Dawley rats were divided into control, sham lesion, 6-OHDA treated (300 µg, intracisternal), 6-OHDA with QN (50 mg/kg) treated, 6-OHDA with DFO (50 mg/kg) treated and 6-OHDA with QN and DFO treated groups. Striatal dopamine, protein carbonyl content (PCC), glutathione (GSH) and superoxide dismutase (SOD) were estimated. There was a significant increase (p protection. Combined treatment has a more significant effect (p protecting the neurons and increasing the antioxidant enzymes in the striatum. In conclusion, an antioxidant with iron chelator treatment showed a significant neuroprotective effect against 6-hydroxydopamine (6-OHDA) by preventing dopaminergic neuronal loss and maintaining the striatal dopamine level.

  5. A new HCV genotype 6 subtype designated 6v was confirmed with three complete genome sequences.

    Science.gov (United States)

    Wang, Yizhong; Xia, Xueshan; Li, Chunhua; Maneekarn, Niwat; Xia, Wenjie; Zhao, Wenhua; Feng, Yue; Kung, Hsiang Fu; Fu, Yongshui; Lu, Ling

    2009-03-01

    Although hepatitis C virus (HCV) genotype 6 is classified into 21 subtypes, 6a-6u, new variants continue to be identified. To characterize the full-length genomes of three novel HCV genotype 6 variants: KMN02, KM046 and KM181. From sera of patients with HCV infection, the entire HCV genome was amplified by RT-PCR followed by direct DNA sequencing and phylogenetic analysis. The sera contained HCV genomes of 9461, 9429, and 9461nt in length, and each harboured a single ORF of 9051nt. The genomes showed 95.3-98.1% nucleotide similarity to each other and 72.2-75.4% similarity to 23 genotype 6 reference sequences, which represent subtypes 6a-6u and unassigned variants km41 and gz52557. Phylogenetic analyses demonstrated that they were genotype 6, but were subtypically distinct. Based on the current criteria of HCV classification, they were designed to represent a new subtype, 6v. Analysis of E1 and NS5B region partial sequences revealed two additional related variants, CMBD-14 and CMBD-86 that had been previously reported in northern Thailand and sequences dropped into Genbank. Three novel HCV genotype 6 variants were entirely sequenced and designated subtype 6v.

  6. 7 CFR 1219.6 - Customs.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Customs. 1219.6 Section 1219.6 Agriculture..., AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.6 Customs. Customs means the United States Customs Service. ...

  7. Omega-6 Fatty Acids

    Science.gov (United States)

    Omega-6 fatty acids are types of fats. Some types are found in vegetable oils, including corn, evening primrose seed, safflower, and soybean oils. Other types of omega-6 fatty acids are found in black currant seed, borage seed, ...

  8. MCNP6 Status

    International Nuclear Information System (INIS)

    Goorley, John T.

    2012-01-01

    We, the development teams for MCNP, NJOY, and parts of ENDF, would like to invite you to a proposed 3 day workshop October 30, 31 and November 1 2012, to be held at Los Alamos National Laboratory. At this workshop, we will review new and developing missions that MCNP6 and the underlying nuclear data are being asked to address. LANL will also present its internal plans to address these missions and recent advances in these three capabilities and we will be interested to hear your input on these topics. Additionally we are interested in hearing from you additional technical advances, missions, concerns, and other issues that we should be considering for both short term (1-3 years) and long term (4-6 years)? What are the additional existing capabilities and methods that we should be investigating? The goal of the workshop is to refine priorities for mcnp6 transport methods, algorithms, physics, data and processing as they relate to the intersection of MCNP, NJOY and ENDF.

  9. Transport of ions through a (6,6) carbon nanotube under electric fields

    Science.gov (United States)

    Shen, Li; Xu, Zhen; Zhou, Zhe-Wei; Hu, Guo-Hui

    2014-11-01

    The transport of water and ions through carbon nanotubes (CNTs) is crucial in nanotechnology and biotechnology. Previous investigation indicated that the ions can hardly pass through (6,6) CNTs due to their hydrated shells. In the present study, utilizing molecular dynamics simulation, it is shown that the energy barrier mainly originating from the hydrated water molecules could be overcome by applying an electric field large enough in the CNT axis direction. Potential of mean force is calculated to show the reduction of energy barrier when the electric field is present for (Na+, K+, Cl-) ions. Consequently, ionic flux through (6,6) CNTs can be found once the electric field becomes larger than a threshold value. The variation of the coordination numbers of ions at different locations from the bulk to the center of the CNT is also explored to elaborate this dynamic process. The thresholds of the electric field are different for Na+, K+, and Cl- due to their characteristics. This consequence might be potentially applied in ion selectivity in the future.

  10. Baryon spectroscopy and SU(6)

    International Nuclear Information System (INIS)

    Litchfield, P.

    1977-09-01

    An elementary account of the SU(6) formalism for baryons is given. The assignment of the known resonances to SU(6) multiplets is discussed and an experimental scheme given for the spectrum of SU(6) x 0(2) multiplets. (author)

  11. Temperature effects on diffusion coefficient for 6-gingerol and 6-shogaol in subcritical water extraction

    Science.gov (United States)

    Ilia Anisa, Nor; Azian, Noor; Sharizan, Mohd; Iwai, Yoshio

    2014-04-01

    6-gingerol and 6-shogaol are the main constituents as anti-inflammatory or bioactive compounds from zingiber officinale Roscoe. These bioactive compounds have been proven for inflammatory disease, antioxidatives and anticancer. The effect of temperature on diffusion coefficient for 6-gingerol and 6-shogaol were studied in subcritical water extraction. The diffusion coefficient was determined by Fick's second law. By neglecting external mass transfer and solid particle in spherical form, a linear portion of Ln (1-(Ct/Co)) versus time was plotted in determining the diffusion coefficient. 6-gingerol obtained the higher yield at 130°C with diffusion coefficient of 8.582x10-11 m2/s whilst for 6-shogaol, the higher yield and diffusion coefficient at 170°C and 19.417 × 10-11 m2/s.

  12. Syntheses of [6-14C] and [5-carboxy, 6-14C2]nitrendipine

    International Nuclear Information System (INIS)

    Maul, N.; Scherling, D.

    1989-01-01

    [6- 14 C]Nitrendipine synthesis started from barium[ 14 ]carbonate, which was converted to [1- 14 C]acetyl chloride. The acid chloride was condensed with Meldrum's acid (2,2-dimethyl-1,3-dioxane-4,6-dione). The resulting intermediate was treated with boiling methanol to give methyl [3- 14 C]acetoacetate. The reaction with gaseous ammonia in toluene yielded the corresponding methyl 3-amino[3- 14 C]crotonate which was condensed with ethyl 2-(3-nitro-benzylidene) acetoacetate to obtain [6- 14 C]nitrendipine. (author)

  13. 7 CFR 1230.6 - Council.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Council. 1230.6 Section 1230.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... CONSUMER INFORMATION Pork Promotion, Research, and Consumer Information Order Definitions § 1230.6 Council...

  14. 7 CFR 1215.6 - Department.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Department. 1215.6 Section 1215.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... CONSUMER INFORMATION Popcorn Promotion, Research, and Consumer Information Order Definitions § 1215.6...

  15. 10 CFR 1017.6 - Authority.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Authority. 1017.6 Section 1017.6 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) IDENTIFICATION AND PROTECTION OF UNCLASSIFIED CONTROLLED NUCLEAR INFORMATION Initially Determining What Information Is Unclassified Controlled Nuclear Information § 1017.6 Authority...

  16. 7 CFR 1540.6 - Information.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Information. 1540.6 Section 1540.6 Agriculture Regulations of the Department of Agriculture (Continued) FOREIGN AGRICULTURAL SERVICE, DEPARTMENT OF... § 1540.6 Information. Persons desiring information from the Department of Agriculture regarding the...

  17. Friction behavior of cobalt base and nickel base hardfacing materials in high temperature sodium

    International Nuclear Information System (INIS)

    Mizobuchi, Syotaro; Kano, Shigeki; Nakayama, Kohichi; Atsumo, Hideo

    1980-01-01

    A friction behavior of the hardfacing materials such as cobalt base alloy ''Stellite'' and nickel base alloy ''Colmonoy'' used in the sliding components of a sodium cooled fast breeder reactor was investigated in various sodium environments. Also, friction tests on these materials were carried out in argon environment. And they were compared with those in sodium environment. The results obtained are as follows: (1) In argon, the cobalt base hardfacing alloy showed better friction behavior than the nickel base hardfacing alloy. In sodium, the latter was observed to have the better friction behavior being independent of the sodium temperature. (2) The friction coefficient of each material tends to become lower by pre-exposure in sodium. Particularly, this tendency was remarkable for the nickel base hardfacing alloy. (3) The friction coefficient between SUS 316 and one of these hardfacing materials was higher than that between latter materials. Also, some elements of hardfacing alloys were recognized to transfer on the friction surface of SUS 316 material. (4) It was observed that each tested material has a greater friction coefficient with a decrease of the oxygen content in sodium. (author)

  18. Regulatory Role of N6 -methyladenosine (m6 A) Methylation in RNA Processing and Human Diseases.

    Science.gov (United States)

    Wei, Wenqiang; Ji, Xinying; Guo, Xiangqian; Ji, Shaoping

    2017-09-01

    N 6 -methyladenosine (m 6 A) modification is an abundant and conservative RNA modification in bacterial and eukaryotic cells. m 6 A modification mainly occurs in the 3' untranslated regions (UTRs) and near the stop codons of mRNA. Diverse strategies have been developed for identifying m 6 A sites in single nucleotide resolution. Dynamic regulation of m 6 A is found in metabolism, embryogenesis, and developmental processes, indicating a possible epigenetic regulation role along RNA processing and exerting biological functions. It has been known that m 6 A editing involves in nuclear RNA export, mRNA degradation, protein translation, and RNA splicing. Deficiency of m 6 A modification will lead to kinds of diseases, such as obesity, cancer, type 2 diabetes mellitus (T2DM), infertility, and developmental arrest. Some specific inhibitors against methyltransferase and demethylase have been developed to selectively regulate m 6 A modification, which may be advantageous for treatment of m 6 A related diseases. J. Cell. Biochem. 118: 2534-2543, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  19. Endogenous morphine-6-glucuronide (M6G) is present in the plasma of patients: validation of a specific anti-M6G antibody for clinical and basic research.

    Science.gov (United States)

    Laux-Biehlmann, Alexis; Chung, Hélène; Mouheiche, Jinane; Vérièpe, Julie; Delalande, François; Lamshöft, Marc; Welters, Ingeborg D; Soldevila, Stéphanie; Bazin, Hervé; Lamarque, Laurent; Van Dorsselaer, Alain; Poisbeau, Pierrick; Schneider, Francis; Goumon, Yannick; Garnero, Patrick

    2014-01-01

    Endogenous morphine and its derivatives (morphine-6-glucuronide [M6G]; morphine-3-glucuronide [M3G]) are formed by mammalian cells from dopamine. Changes in the concentrations of endogenous morphine have been demonstrated in several pathologies (sepsis, Parkinson's disease, etc.), and they might be relevant as pathological markers. While endogenous morphine levels are detectable using enzyme-linked immunosorbant assay (ELISA), mass spectrometry (MS) analysis was, so far, the only approach to detect and quantify M6G. This study describes the preparation of a specific anti-M6G rabbit polyclonal antibody and its validation. The specificity of this antibody was assessed against 30 morphine-related compounds. Then, a M6G-specific ELISA-assay was tested to quantify M6G in the plasma of healthy donors, morphine-treated, and critically ill patients. The antibody raised against M6G displays a strong affinity for M6G, codeine-6-glucuronide, and morphine-3-6-glucuronide, whereas only weak cross-reactivities were observed for the other compounds. Both M6G-ELISA and LC-MS/MS approaches revealed the absence of M6G in the plasma of healthy donors (controls, n = 8). In all positive donors treated with morphine-patch (n = 5), M6G was detected using both M6G-ELISA and LC-MS/MS analysis. Finally, in a study on critically ill patients with circulating endogenous morphine (n = 26), LC-MS/MS analysis revealed that 73% of the positive-patients (19 of 26), corresponding to high M6G-levels in M6G-ELISA, contained M6G. In conclusion, we show that endogenous M6G can be found at higher levels than morphine in the blood of morphine-naive patients. With respect to the interest of measuring endogenous M6G in pathologies, we provide evidences that our ELISA procedure represents a powerful tool as it can easily and specifically detect endogenous M6G levels. © 2013 International Union of Biochemistry and Molecular Biology.

  20. Magnetic properties of the HoMn6-xFe xSn6 compounds

    International Nuclear Information System (INIS)

    Cakir, O.; Dincer, I.; Duman, E.; Krenke, T.; Elmali, A.; Elerman, Y.

    2007-01-01

    Intermetallic compounds of HoMn 6-x Fe x Sn 6 (0 ≤ x ≤ 1.2) were studied by means of field-cooled (FC) and zero-field-cooled (ZFC) magnetization measurements in the temperature range 5 K ≤ T ≤ 600 K. The unit cell parameters decrease with the increasing of Fe content. The compounds with x = 0 and 0.3 behave ferrimagnetically in the whole temperature range and spin reorientation transition is observed at 200 and 185 K, respectively. The x = 0.5 and 0.6 compounds show ferrimagnetic-helimagnetic-ferrimagnetic phase transitions with decreasing temperature while the compounds with x = 0.9 and 1.2 only show helimagnetic-ferrimagnetic phase transitions. Additionally, for the x = 0.6 compound the metamagnetic phase transition from helimagnetism to ferrimagnetism is induced by an applied field 20 kOe

  1. Identification and characterization of new molecular partners for the protein arginine methyltransferase 6 (PRMT6.

    Directory of Open Access Journals (Sweden)

    Alessandra Lo Sardo

    Full Text Available PRMT6 is a protein arginine methyltransferase that has been implicated in transcriptional regulation, DNA repair, and human immunodeficiency virus pathogenesis. Only few substrates of this enzyme are known and therefore its cellular role is not well understood. To identify in an unbiased manner substrates and potential regulators of PRMT6 we have used a yeast two-hybrid approach. We identified 36 new putative partners for PRMT6 and we validated the interaction in vivo for 7 of them. In addition, using invitro methylation assay we identified 4 new substrates for PRMT6, extending the involvement of this enzyme to other cellular processes beyond its well-established role in gene expression regulation. Holistic approaches create molecular connections that allow to test functional hypotheses. The assembly of PRMT6 protein network allowed us to formulate functional hypotheses which led to the discovery of new molecular partners for the architectural transcription factor HMGA1a, a known substrate for PRMT6, and to provide evidences for a modulatory role of HMGA1a on the methyltransferase activity of PRMT6.

  2. 17 CFR 39.6 - Enforceability.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Enforceability. 39.6 Section 39.6 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION DERIVATIVES CLEARING ORGANIZATIONS § 39.6 Enforceability. An agreement, contract or transaction submitted to a derivatives clearing...

  3. Temperature effects on diffusion coefficient for 6-gingerol and 6-shogaol in subcritical water extraction

    International Nuclear Information System (INIS)

    Anisa, Nor Ilia; Azian, Noor; Sharizan, Mohd; Iwai, Yoshio

    2014-01-01

    6-gingerol and 6-shogaol are the main constituents as anti-inflammatory or bioactive compounds from zingiber officinale Roscoe. These bioactive compounds have been proven for inflammatory disease, antioxidatives and anticancer. The effect of temperature on diffusion coefficient for 6-gingerol and 6-shogaol were studied in subcritical water extraction. The diffusion coefficient was determined by Fick's second law. By neglecting external mass transfer and solid particle in spherical form, a linear portion of Ln (1-(Ct/Co)) versus time was plotted in determining the diffusion coefficient. 6-gingerol obtained the higher yield at 130°C with diffusion coefficient of 8.582x10 −11 m 2 /s whilst for 6-shogaol, the higher yield and diffusion coefficient at 170°C and 19.417 × 10 −11 m 2 /s.

  4. Use of 6α- and 6β-carboxymethyl testosterone-bovine serum albumin conjugates in radioimmunoassay for testosterone

    International Nuclear Information System (INIS)

    Jones, C.D.; Mason, N.R.

    1975-01-01

    The synthesis of 6α- and 6β-testosterone-bovine serum albumin (BSA) conjugates is described. 6β-Carboxymethyl-4-androstene-3,17-dione was prepared by a route analogous to that described earlier for 6β-carboxymethyl progesterone. Sodium borohydride reduction of the 3 and 17 keto groups and subsequent selective oxidation of the resulting 3β,17β-diol using MnO 2 provided 6β-carboxymethyl testosterone. Further acid catalyzed epimerization of the C-6 center gave the isomeric 6α-carboxymethyl testosterone. The 6α- and 6β-testosterone derivatives were attached to BSA via a mixed anhydride coupling employing tributylamine and i-butylchlorocarbonate. For each molecule of BSA, the 6α- and 6β-conjugates contained an average of 23 and 20 steroid residues, respectively. Antisera to the conjugates exhibited similar high specificities toward various steroids, the only incidence of serious cross-reaction being the expected case of dihydrotestosterone. (U.S.)

  5. Simulation of LOFT anticipated-transient experiments L6-1, L6-2, and L6-3 using TRAC-PF1/MOD1

    International Nuclear Information System (INIS)

    Sahota, M.S.

    1984-01-01

    Anticipated-transient experiments L6-1, L6-2, and L6-3, performed at the Loss-of-fluid Test (LOFT) facility, are analyzed using the latest released version of the Transient Reactor Analysis Code (TRAC-PF1/MOD1). The results are used to assess TRAC-PF1/MOD1 trip and control capabilities, and predictions of thermal-hydraulic phenomena during slow transients. Test L6-1 simulated a loss-of-stream load in a large pressurized-water reactor (PWR), and was initiated by closing the main steam-flow control valve (MSFCV) at its maximum rate, which reduced the heat removal from the secondary-coolant system and increased the primary-coolant system pressure that initiated a reactor scram. Test L6-2 simulated a loss-of-primary coolant flow in a large PWR, and was initiated by tripping the power to the primary-coolant pumps (PCPs) allowing the pumps to coast down. The reduced primary-coolant flow caused a reactor scram. Test L6-3 simulated an excessive-load increase incident in a large PWR, and was initiated by opening the MSFCV at its maximum rate, which increased the heat removal from the secondary-coolant system and decreased the primary-coolant system pressure that initiated a reactor scram. The TRAC calculations accurately predict most test events. The test data and the calculated results for most parameters of interest also agree well

  6. Identification of α-Chloro-2,2',4,4',6,6'-Hexanitrobibenzyl as an Impurity in Hexanitrostilbene

    Science.gov (United States)

    Bellamy, A. J.

    2010-01-01

    The final intermediate in the Shipp synthesis of 2,2‧,4,4‧,6,6‧-hexanitrostilbene (HNS) from TNT, α-chloro-2,2‧,4,4‧,6,6‧-hexanitrobibenzyl, has been extracted and characterized by nuclear magnetic resonance (NMR) spectroscopy, chlorine elemental analysis, and high-performance liquid chromatography (HPLC). It has also been shown that digestion in NMP of HNS containing α-chlorohexanitrobibenzyl generates another chlorine-containing by-product, 2-chloro-2‧,4,4‧,6,6‧-pentanitrostilbene. This too has been characterized by NMR spectroscopy, chlorine elemental analysis, and HPLC.

  7. Comparing Tactical Behaviour of Soccer Players in 3 vs. 3 and 6 vs. 6 Small-Sided Games

    Directory of Open Access Journals (Sweden)

    Silva Bernardo

    2014-07-01

    Full Text Available The present study aimed to compare players’ tactical behaviour in 3 vs. 3 and 6 vs. 6 soccer small-sided games (SSGs. The sample comprised 3,482 tactical actions performed by 18 U-11 youth soccer players from a Portuguese club, in 3 vs. 3 and 6 vs. 6 SSGs. All participants played eight minutes in both situations and field size was adapted according to the number of players involved (30 m x 19.5 m for 3 vs. 3 and 60 m x 39 m for 6 vs. 6. The System of Tactical Assessment in Soccer (FUT-SAT was used for data collection and analyses. Descriptive analysis was conducted to verify frequencies and percentages of the variables assessed. The chi-squared (χ2 test was performed to compare the frequencies of the variables between 3 vs. 3 and 6 vs. 6 SSGs and Standardized Residuals (e were used to examine the influence of the frequency of one or more variables within 3 vs. 3 and 6 vs. 6 SSGs. Data treatment was performed through SPSS for Windows®, version 18.0. Results indicated that players displayed safer behaviours in 6 vs. 6 SSG and more aggressive behaviours in 3 vs. 3 SSG. Findings can aid coaches and teachers to develop different players’ tactical skills according to the chosen SSG (3 vs. 3 or 6 vs. 6 form.

  8. 40 CFR 1508.6 - Council.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Council. 1508.6 Section 1508.6 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY TERMINOLOGY AND INDEX § 1508.6 Council. Council means the Council on Environmental Quality established by title II of the Act. ...

  9. 32 CFR 542.6 - Responsibilities.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Responsibilities. 542.6 Section 542.6 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY MILITARY EDUCATION SCHOOLS AND COLLEGES § 542.6 Responsibilities. (a) The Commanding General, US Army Military Personnel Center, 200 Stovall...

  10. 14 CFR 1260.6 - Publication.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Publication. 1260.6 Section 1260.6 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION GRANTS AND COOPERATIVE AGREEMENTS General § 1260.6 Publication. The official site for accessing the NASA Grant and Cooperative Agreement Handbook...

  11. 11 CFR 6.110 - Evaluation.

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Evaluation. 6.110 Section 6.110 Federal... OR ACTIVITIES CONDUCTED BY THE FEDERAL ELECTION COMMISSION § 6.110 Evaluation. (a) Within one year of... persons, including handicapped persons and organizations representing handicapped persons, and evaluation...

  12. 40 CFR 109.6 - Coordination.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Coordination. 109.6 Section 109.6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS CRITERIA FOR STATE, LOCAL AND REGIONAL OIL REMOVAL CONTINGENCY PLANS § 109.6 Coordination. For the purposes of coordination...

  13. Chromosomal aberrations induced by 12C6+ ions and 6Co γ-rays in mouse immature oocytes

    International Nuclear Information System (INIS)

    Zhang Hong; Duan Xin; Yuan Zhigang; Li Wenjian; Zhou Guangming; Zhou Qingming; Bing Liu; Min Fengling; Li Xiaoda; Xie Yi

    2006-01-01

    The ovaries of Kun-Ming strain mice (3 weeks) were irradiated with different doses of 12 C 6+ ion or 6 Co γ-ray. Chromosomal aberrations were analyzed in metaphase II oocytes at 7 weeks after irradiation. The relative biological effectiveness (RBE) of 12 C 6+ ion was calculated with respect to 6 Co γ-ray for the induction of chromosomal aberrations. The 12 C 6+ ion and 6 Co γ-ray dose-response relationships for chromosomal aberrations were plotted by linear quadratic models. The data showed that there was a dose-related increase in frequency of chromosomal aberrations in all the treated groups compared to controls. The RBE values for 12 C 6+ ions relative to 6 Co γ-rays were 2.49, 2.29, 1.57, 1.42 or 1.32 for the doses of 0.5, 1.0, 2.0, 4.0 or 6.0 Gy, respectively. Moreover, a different distribution of the various types of aberrations has been found for 12 C 6+ ion and 6 Co γ-ray irradiations. The dose-response relationships for 12 C 6+ ion and 6 Co γ-ray exhibited positive correlations. The results from the present study may be helpful for assessing genetic damage following exposure of immature oocytes to ionizing radiation

  14. SF6 and the greenhouse effect

    International Nuclear Information System (INIS)

    Gjaerde, Anne Cathrine; Rein, Asgaut; Hegerberg, Rolf; Kulsetaas, John

    1997-01-01

    The gas SF 6 (sulfur hexafluoride) is much used as an insulation medium in electric switchgear and breakers. However, there has been some recent concern about the possible contribution of SF 6 to the global greenhouse effect. This report presents some collected facts about SF 6 emission. The concentration of SF 6 in the atmosphere is very low and will probably remain so until the end of the next century. Hence the contribution of SF 6 to the greenhouse effect is negligible. Most of the SF 6 emission comes from the magnesium and aluminium industries. In 1993, SF 6 emission from switchgear in the Norwegian distribution grid corresponded to only 0.2 per million of the CO 2 emission in Norway. But the quantity of SF 6 accumulated in electric switchgear is considerable. However, losing it to the atmosphere can be avoided by using recirculation or destruction systems for SF 6 in connection with maintenance and replacement of components. Norwegian climate policy aims at taking measures against SF 6 and other climate gases on a par with CO 2 . Taxation measures have been suggested for SF 6 . Atmospheric SF 6 does not influence the ozone layer. 3 refs., 8 figs

  15. Two apparent glucose-6-phosphate dehydrogenase variants in normal XY males: G6PD Alabama.

    Science.gov (United States)

    Prchal, J T; Hall, K; Csepreghy, M; Lilly, M; Berkow, R; Scott, C W

    1988-03-01

    A six-year-old black boy who had transient hemolysis after a viral infection was found to have mildly decreased red cell glucose-6-phosphate dehydrogenase (G6PD) activity (1.25 IU/g hemoglobin). Two G6PD bands, both slightly faster than normal G6PD B, were seen on electrophoresis in both the propositus as well as in his maternal grandfather. This is an unexpected finding, since the G6PD gene is located on the long arm of the X chromosome that is subject to X-chromosome inactivation, and available evidence indicates that it is present as a single functional copy in the human genome. The obvious possibility of duplication of the X chromosome was eliminated by cytogenetic analysis with G-banding. G6PD duplication is unlikely, since peripheral blood granulocytes, platelets, and lymphocytes; cultured skin and bone marrow fibroblasts; and Epstein-Barr virus-stimulated lymphocytes yielded only a single electrophoretic band with mobility identical to the slower band seen in crude red blood cell hemolysate. Study of partially purified red blood cell hemolysate G6PD also yielded a single band with identical mobility. Kinetic studies of the enzyme in the propositus and in three generations of his family identified a unique, previously unpublished G6PD mutant that is herein designated G6PD Alabama. Red blood cells were separated by density gradient into a reticulocyte-enriched, an intermediate, and a dense, older portion. Two distinct enzyme bands were identified on electrophoresis of hemolysate from the reticulocyte-enriched portion, but not from the other two portions. It is postulated that two transcriptional products of the mutant G6PD gene exist; one with a short half-life and detectable only in young red blood cells, and another with a longer half-life present in all cells. The existence of two distinct mutant genes in the genome or a unique post-translational form of the mutant G6PD detected only in reticulocytes cannot be excluded.

  16. 40 CFR 6.402 - Definitions.

    Science.gov (United States)

    2010-07-01

    ... Environmental Effects Abroad of EPA Actions § 6.402 Definitions. As used in this subpart, environment means the... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Definitions. 6.402 Section 6.402 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL PROCEDURES FOR IMPLEMENTING THE NATIONAL...

  17. 18 CFR 158.6 - Determination.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Determination. 158.6 Section 158.6 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT....6 Determination. If no formal hearing is had the matter in issue will be determined by the...

  18. 38 CFR 6.10 - Options.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Options. 6.10 Section 6.10 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS UNITED STATES GOVERNMENT LIFE INSURANCE Optional Settlement § 6.10 Options. Insurance will be payable in one sum only when...

  19. 49 CFR 6.29 - Settlement.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Settlement. 6.29 Section 6.29 Transportation... PROCEEDINGS Procedures for Considering Applications § 6.29 Settlement. The applicant and agency counsel may agree on a proposed settlement of the award before final action on the application, either in connection...

  20. 34 CFR 303.6 - Act.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Act. 303.6 Section 303.6 Education Regulations of the..., Eligibility, and Other General Provisions § 303.6 Act. As used in this part, Act means the Individuals with Disabilities Education Act. (Authority: 20 U.S.C. 1400) ...

  1. 19 CFR 202.6 - Reports.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 3 2010-04-01 2010-04-01 false Reports. 202.6 Section 202.6 Customs Duties UNITED... PRODUCTION § 202.6 Reports. After the completion of its investigation, the Commission will incorporate its findings in a report, and the report will be transmitted to the President. ...

  2. 34 CFR 98.6 - Reports.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Reports. 98.6 Section 98.6 Education Office of the Secretary, Department of Education STUDENT RIGHTS IN RESEARCH, EXPERIMENTAL PROGRAMS, AND TESTING § 98.6 Reports. The Secretary may require the recipient to submit reports containing information necessary to...

  3. 11 CFR 6.140 - Employment.

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Employment. 6.140 Section 6.140 Federal... OR ACTIVITIES CONDUCTED BY THE FEDERAL ELECTION COMMISSION § 6.140 Employment. No qualified handicapped person shall, on the basis of handicap, be subjected to discrimination in employment under any...

  4. 7 CFR 12.6 - Administration.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Administration. 12.6 Section 12.6 Agriculture Office....6 Administration. (a) General. A determination of ineligibility for benefits in accordance with the... making such determinations, as provided in this section. (b) Administration by FSA. (1) The provisions of...

  5. 30 CFR 270.6 - Process.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Process. 270.6 Section 270.6 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR OFFSHORE NONDISCRIMINATION IN THE OUTER CONTINENTAL SHELF § 270.6 Process. Whenever a Regional Director determines on the basis of any information...

  6. 15 CFR 806.6 - Penalties.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Penalties. 806.6 Section 806.6 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF ECONOMIC ANALYSIS, DEPARTMENT OF COMMERCE DIRECT INVESTMENT SURVEYS § 806.6 Penalties. (a) Whoever fails to...

  7. 32 CFR 145.6 - Procedures.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Procedures. 145.6 Section 145.6 National Defense... THE OFFICE OF SPECIAL COUNSEL OF THE MERIT SYSTEMS PROTECTION BOARD § 145.6 Procedures. (a... corrective or disciplinary action considered appropriate because of facts disclosed by such an investigation...

  8. 15 CFR 1400.6 - Construction.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Construction. 1400.6 Section 1400.6 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) MINORITY BUSINESS DEVELOPMENT AGENCY DETERMINATION OF GROUP ELIGIBILITY FOR MBDA ASSISTANCE § 1400.6 Construction. Nothing in...

  9. 40 CFR 230.6 - Adaptability.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Adaptability. 230.6 Section 230.6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING SECTION 404(b)(1) GUIDELINES FOR SPECIFICATION OF DISPOSAL SITES FOR DREDGED OR FILL MATERIAL General § 230.6 Adaptability. (a...

  10. Chromatin-mediated transcriptional regulation by the yeast architectural factors NHP6A and NHP6B

    DEFF Research Database (Denmark)

    Moreira, José Manuel Alfonso; Holmberg, S

    2000-01-01

    The Saccharomyces cerevisiae NHP6A and NHP6B proteins are chromatin architectural factors, functionally and structurally related to the mammalian high mobility group (HMG)-1 and -2 proteins, a family of non-sequence-specific DNA binding proteins. nhp6a nhp6b mutants have various morphological...

  11. Comparison of the properties polyamide 6.6 surfaces treated by plasma and by ionizing radiation

    International Nuclear Information System (INIS)

    Irineu, Rosa Maria da Silva

    2010-01-01

    This study aims to compare the surface properties of polyamide 6.6 plasma treatment and ionizing radiation, as well as determine the best technique and condition of the surface activation, adhesion of the same order and polyacrylic rubber used in manufacturing of automotive retainers. Treatment of polyamide 6.6 plasma was performed using an equipment 'Electronic Diener - Plasma - Surface-Technology LFG40' with nitrogen gas at a pressure of 1.40 kg/cm 2 . Samples of polyamide 6.6 were also treated with ionizing radiation, atmospheric pressure and in vacuum, using an industrial electron accelerator, Dynamitron JOB 188 with radiation dose of 5, 10, 20, 40, 50, 100, 200, 300, 400 and 500kGy with a dose rate of 11.22 kGy/s for all doses and rate of 11.22 kGy/s and 22.38 kGy/s for a dose of 20kGy. After the processes of surface modification of polyamide 6.6, part of the untreated samples, treated by plasma and by ionizing radiation were incorporated into the polyacrylic rubber, and another part was designed to characterize the surface using the techniques of SEM / EDS, FT- IR, PIXE / RBS, AFM and contact angle. Untreated samples and the irradiated samples did not join the polyacrylic rubber. The samples treated by plasma joined the polyacrylic rubber efficiently and showed differences in roughness in SEM and AFM, and an increase in contact angle when compared with untreated samples. The irradiated samples showed no significant differences in the analysis of properties used in this study when compared with untreated samples. Ionizing radiation was not effective in surface modification of polyamide 6.6 for adherence with polyacrylic rubber. (author)

  12. The next generation CANDU 6

    International Nuclear Information System (INIS)

    Hopwood, J.M.

    1999-01-01

    AECL's product line of CANDU 6 and CANDU 9 nuclear power plants are adapted to respond to changing market conditions, experience feedback and technological development by a continuous improvement process of design evolution. The CANDU 6 Nuclear Power Plant design is a successful family of nuclear units, with the first four units entering service in 1983, and the most recent entering service this year. A further four CANDU 6 units are under construction. Starting in 1996, a focused forward-looking development program is under way at AECL to incorporate a series of individual improvements and integrate them into the CANDU 6, leading to the evolutionary development of the next-generation enhanced CANDU 6. The CANDU 6 improvements program includes all aspects of an NPP project, including engineering tools improvements, design for improved constructability, scheduling for faster, more streamlined commissioning, and improved operating performance. This enhanced CANDU 6 product will combine the benefits of design provenness (drawing on the more than 70 reactor-years experience of the seven operating CANDU 6 units), with the advantages of an evolutionary next-generation design. Features of the enhanced CANDU 6 design include: Advanced Human Machine Interface - built around the Advanced CANDU Control Centre; Advanced fuel design - using the newly demonstrated CANFLEX fuel bundle; Improved Efficiency based on improved utilization of waste heat; Streamlined System Design - including simplifications to improve performance and safety system reliability; Advanced Engineering Tools, -- featuring linked electronic databases from 3D CADDS, equipment specification and material management; Advanced Construction Techniques - based on open top equipment installation and the use of small skid mounted modules; Options defined for Passive Heat Sink capability and low-enrichment core optimization. (author)

  13. Chemical exchange between UF6 and UF6- ion in anhydrous hydrofluoric acid

    International Nuclear Information System (INIS)

    Chatelet, J.; Luce, M.; Plurien, P.; Rigny, P.

    1975-01-01

    The chemical exchange between UF 6 and the UF 6 - ion is of potential interest for the separation of U isotopes. In this paper, results concerning the value of the separation factor and the kinetics of the homogeneous exchange are given [fr

  14. IPv6 Network Security using Snort

    OpenAIRE

    Kaur, Ravreet; Kumar, Sumit

    2013-01-01

    IPv6 is new routing protocol. IPv6 is introduced by IETF mainly due IPv4 address exhaustion but it is also an enhanced version of IPv4. There are many changes in IPv6 header, some fields from IPv6 header has been deprecated from IPv6 and some are newly added. There is also common misconception among people that IPv6 is more secure than IPv4, which is not true. Now a day's intruders are targeting IPv6 networks as it is widely being accepted by many organization for their network. An intruder c...

  15. Mixed field radiation effects on dry and acidic solution saturated polyamide 6,6

    Energy Technology Data Exchange (ETDEWEB)

    Brown, L. [Department of Chemistry and Chemical Engineering, Royal Military College of Canada, Kingston, Ont., K7K 7B4 (Canada); Bonin, H.W. [Department of Chemistry and Chemical Engineering, Royal Military College of Canada, Kingston, Ont., K7K 7B4 (Canada)]. E-mail: bonin-h@rmc.ca; Bui, V.T. [Department of Chemistry and Chemical Engineering, Royal Military College of Canada, Kingston, Ont., K7K 7B4 (Canada)

    2005-05-15

    The disposal of Canada's radioactive waste materials has been the focus of ongoing research at the Royal Military College of Canada, in the use of polymer-based composite materials for the fabrication of disposal containers. An evaluation of the performance of polyamide 6,6 after exposure to radiation and acidic aqueous solutions provides the basis for the assessment of the lifetime performance of a polymeric-based storage container. This work demonstrates the importance of the combined effects of aqueous solution diffusion and radiation exposure on the mechanical performance and molecular structure of polyamide 6,6. Irradiation of dry samples initially results in a marked reduction of mechanical performance, however, post-irradiation aging allows for the return to pre-irradiation mechanical strength. Samples irradiated after exposure to either distilled water or 0.1 M sulfuric acid solutions exhibited increases in mechanical performance upon exposure to a mixed field radioactive environment.

  16. Mixed field radiation effects on dry and acidic solution saturated polyamide 6,6

    International Nuclear Information System (INIS)

    Brown, L.; Bonin, H.W.; Bui, V.T.

    2005-01-01

    The disposal of Canada's radioactive waste materials has been the focus of ongoing research at the Royal Military College of Canada, in the use of polymer-based composite materials for the fabrication of disposal containers. An evaluation of the performance of polyamide 6,6 after exposure to radiation and acidic aqueous solutions provides the basis for the assessment of the lifetime performance of a polymeric-based storage container. This work demonstrates the importance of the combined effects of aqueous solution diffusion and radiation exposure on the mechanical performance and molecular structure of polyamide 6,6. Irradiation of dry samples initially results in a marked reduction of mechanical performance, however, post-irradiation aging allows for the return to pre-irradiation mechanical strength. Samples irradiated after exposure to either distilled water or 0.1 M sulfuric acid solutions exhibited increases in mechanical performance upon exposure to a mixed field radioactive environment

  17. High temperature drop calorimetric studies on La6UO12 and Nd6UO12

    International Nuclear Information System (INIS)

    Babu, R.; Senapati, A.; Rao, G.J.; Venkata Krishnan, R.; Ananthasivan, K.; Nagarajan, K.

    2014-01-01

    Rare earth elements produced in the reactor during irradiation can interact with the fuel. Under transient conditions, compounds of formula, RE 6 UO 12 with rhombohedral crystal structure are expected to be formed. Hence, thermodynamic properties of these compounds are useful in interpreting the behaviour of fuels during irradiation. Thermal expansion and heat capacities by DSC have been reported for La 6 UO 12 and Nd 6 UO 12 . There are no experimentally measured values of enthalpy. Hence, measurements on enthalpy increments of La 6 UO 12 and Nd 6 UO 12 were carried out for the first time by inverse drop calorimetry in the temperature range 534-1738 K and computed the thermodynamic functions

  18. Differential expression of IL-6/IL-6R and MAO-A regulates invasion/angiogenesis in breast cancer.

    Science.gov (United States)

    Bharti, Rashmi; Dey, Goutam; Das, Anjan Kumar; Mandal, Mahitosh

    2018-04-26

    Monoamine oxidases (MAO) are mitochondrial enzymes functioning in oxidative metabolism of monoamines. The action of MAO-A has been typically described in neuro-pharmacological domains. Here, we have established a co-relation between IL-6/IL-6R and MAO-A and their regulation in hypoxia induced invasion/angiogenesis. We employed various in-vitro and in-vivo techniques and clinical samples. We studied a co-relation among MAO-A and IL-6/IL-6R and tumour angiogenesis/invasion in hypoxic environment in breast cancer model. Activation of IL-6/IL-6R and its downstream was found in hypoxic cancer cells. This elevation of IL-6/IL-6R caused sustained inhibition of MAO-A in hypoxic environment. Inhibition of IL-6R signalling or IL-6R siRNA increased MAO-A activity and inhibited tumour angiogenesis and invasion significantly in different models. Further, elevation of MAO-A with 5-azacytidine (5-Aza) modulated IL-6 mediated angiogenesis and invasive signatures including VEGF, MMPs and EMT in hypoxic breast cancer. High grade invasive ductal carcinoma (IDC) clinical specimen displayed elevated level of IL-6R and depleted MAO-A expression. Expression of VEGF and HIF-1α was unregulated and loss of E-Cadherin was observed in high grade IDC tissue specimen. Suppression of MAO-A by IL-6/IL-6R activation promotes tumour angiogenesis and invasion in hypoxic breast cancer environment.

  19. 18 CFR 41.6 - Determination.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Determination. 41.6 Section 41.6 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF....6 Determination. If no formal hearing is had the matter in issue will be determined by the...

  20. 18 CFR 349.6 - Determination.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Determination. 349.6 Section 349.6 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT... PROPOSED REMEDIES § 349.6 Determination. If no formal hearing is had the matter in issue will be determined...

  1. 29 CFR 401.6 - Employee.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 2 2010-07-01 2010-07-01 false Employee. 401.6 Section 401.6 Labor Regulations Relating to Labor OFFICE OF LABOR-MANAGEMENT STANDARDS, DEPARTMENT OF LABOR LABOR-MANAGEMENT STANDARDS MEANING OF TERMS USED IN THIS SUBCHAPTER § 401.6 Employee. Employee means any individual employed by an employer...

  2. The Otitis Media-6 questionnaire

    DEFF Research Database (Denmark)

    Heidemann, Christian Hamilton; Godballe, Christian; Kjeldsen, Anette Drøhse

    2013-01-01

    The Otitis Media-6 questionnaire (OM-6) is the most frequently used instrument to measure health related quality of life in children with otitis media. The main objectives of this study are 1) to translate and cross-culturally adapt the OM-6 into Danish, and 2) to assess important psychometric...

  3. 7 CFR 6.20 - Introduction.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Introduction. 6.20 Section 6.20 Agriculture Office of the Secretary of Agriculture IMPORT QUOTAS AND FEES Dairy Tariff-Rate Import Quota Licensing § 6.20 Introduction. (a) Presidential Proclamation 6763 of December 23, 1994, modified the Harmonized Tariff Schedule...

  4. 32 CFR 204.6 - Collections.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false Collections. 204.6 Section 204.6 National... USER FEES § 204.6 Collections. (a) Collections of fees will be made in advance or simultaneously with..., and managing cash and debt collections. (b) Unless a statute provides otherwise, user fee collections...

  5. 37 CFR 204.6 - Fees.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Fees. 204.6 Section 204.6 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES PRIVACY ACT: POLICIES AND PROCEDURES § 204.6 Fees. (a) The Copyright Office will provide, free of charge...

  6. Association of active human herpesvirus-6 (HHV-6) infection with autoimmune thyroid gland diseases.

    Science.gov (United States)

    Sultanova, A; Cistjakovs, M; Gravelsina, S; Chapenko, S; Roga, S; Cunskis, E; Nora-Krukle, Z; Groma, V; Ventina, I; Murovska, M

    2017-01-01

    Viral infections frequently have been cited as important environmental factors implicated in the onset of autoimmune thyroiditis (AIT). The aim of this study was to determine the involvement of HHV-6 infection in the development of autoimmune thyroiditis. This study included 45 patients (42 female and 3 male; median age 47.00 IQR 38.50-57.00) with histologically, laboratory, and clinically confirmed autoimmune thyroiditis, as well as 30 autopsied subjects (26 female and 4 male; median age 58.50, IQR 51.50-67.00) without thyroid pathologies and 30 healthy blood donors (25 female and 5 male; median age 33.50, IQR 27.75-44.25) as controls. Results were obtained by applying molecular virology and immunohistochemistry techniques. The presence of persistent HHV-6 infection in AIT patients was significantly higher (p 0.0058) than in the control group (44/45 (98%) vs. 23/30 (77%), respectively). Also, a significantly higher frequency of HHV-6 activation marker (U79/80 mRNA) was found in patients' thyroid gland tissue samples with AIT in comparison with the control group (18/44 (41%) vs. 1/17 (6%), respectively; p 0.0118). The median HHV-6 load was found to be higher in patients with active viral infection than in patients without it (2147, IQR 971-4188 vs. 551, IQR 145-1589 copies/1×10 6 cells; p 0.003). The presence of HHV-6 antigen expression was demonstrated in intrafollicular cellular clusters and immunohistochemistry indicated thyrocytes in the follicle wall. These findings provide evidence of strong HHV-6 infection association with AIT development. Copyright © 2016 European Society of Clinical Microbiology and Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

  7. IPv6 deployment and management

    CERN Document Server

    Dooley, Michael

    2013-01-01

    A guide for understanding, deploying, and managing Internet Protocol version 6 The growth of the Internet has created a need for more addresses than are available with Internet Protocol version 4 (IPv4)-the protocol currently used to direct almost all Internet traffic. Internet Protocol version 6 (IPv6)-the new IP version intended to ultimately succeed IPv4-will expand the addressing capacity of the Internet to support the explosive growth of users and devices on the Internet as well as add flexibility to allocating addresses and efficiency for routing traffic. IPv6 Deploy

  8. Glucose-6-phosphatase deficiency

    Directory of Open Access Journals (Sweden)

    Labrune Philippe

    2011-05-01

    Full Text Available Abstract Glucose-6-phosphatase deficiency (G6P deficiency, or glycogen storage disease type I (GSDI, is a group of inherited metabolic diseases, including types Ia and Ib, characterized by poor tolerance to fasting, growth retardation and hepatomegaly resulting from accumulation of glycogen and fat in the liver. Prevalence is unknown and annual incidence is around 1/100,000 births. GSDIa is the more frequent type, representing about 80% of GSDI patients. The disease commonly manifests, between the ages of 3 to 4 months by symptoms of hypoglycemia (tremors, seizures, cyanosis, apnea. Patients have poor tolerance to fasting, marked hepatomegaly, growth retardation (small stature and delayed puberty, generally improved by an appropriate diet, osteopenia and sometimes osteoporosis, full-cheeked round face, enlarged kydneys and platelet dysfunctions leading to frequent epistaxis. In addition, in GSDIb, neutropenia and neutrophil dysfunction are responsible for tendency towards infections, relapsing aphtous gingivostomatitis, and inflammatory bowel disease. Late complications are hepatic (adenomas with rare but possible transformation into hepatocarcinoma and renal (glomerular hyperfiltration leading to proteinuria and sometimes to renal insufficiency. GSDI is caused by a dysfunction in the G6P system, a key step in the regulation of glycemia. The deficit concerns the catalytic subunit G6P-alpha (type Ia which is restricted to expression in the liver, kidney and intestine, or the ubiquitously expressed G6P transporter (type Ib. Mutations in the genes G6PC (17q21 and SLC37A4 (11q23 respectively cause GSDIa and Ib. Many mutations have been identified in both genes,. Transmission is autosomal recessive. Diagnosis is based on clinical presentation, on abnormal basal values and absence of hyperglycemic response to glucagon. It can be confirmed by demonstrating a deficient activity of a G6P system component in a liver biopsy. To date, the diagnosis is most

  9. Positive autoregulation of the transcription factor Pax6 in response to increased levels of either of its major isoforms, Pax6 or Pax6(5a, in cultured cells

    Directory of Open Access Journals (Sweden)

    Mason John O

    2006-05-01

    Full Text Available Abstract Background Pax6 is a transcription factor essential for normal development of the eyes and nervous system. It has two major isoforms, Pax6 and Pax6(5a, and the ratios between their expression levels vary within narrow limits. We tested the effects of overexpressing either one or other isoform on endogenous Pax6 expression levels in Neuro2A and NIH3T3 cells. Results We found that both isoforms caused an up-regulation of endogenous Pax6 expression in cells with (Neuro2A or without (NIH3T3 constitutive Pax6 expression. Western blots showed that cells stably transfected with constructs expressing either Pax6 or Pax6(5a contained raised levels of both Pax6 and Pax6(5a. Quantitative RT-PCR confirmed an increase in levels of Pax6(5a mRNA in cells containing Pax6-expressing constructs and an increase in levels of Pax6 mRNA in cells containing Pax6(5a-expressing constructs. The fact that the introduction of constructs expressing only one isoform increased the cellular levels of not only that isoform but also the other indicates that activation of the endogenous Pax6 locus occurred. The ratio between the levels of the two isoforms was maintained close to physiological values. The overexpression of either isoform in neuroblastoma (Neuro2A cell lines also promoted morphological change and an increase in β-III-tubulin expression, indicating an increase in neurogenesis. Conclusion Our results demonstrate that Pax6 can up-regulate production of Pax6 protein from an entire intact endogenous Pax6 locus in its genomic environment. This adds to previous studies showing that Pax6 can up-regulate reporter expression driven by isolated Pax6 regulatory elements. Furthermore, our results suggest that an important function of positive feedback might be to stabilise the relative levels of Pax6 and Pax6(5a.

  10. 39 CFR 6.2 - Special meetings.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Special meetings. 6.2 Section 6.2 Postal Service UNITED STATES POSTAL SERVICE THE BOARD OF GOVERNORS OF THE U.S. POSTAL SERVICE MEETINGS (ARTICLE VI) § 6.2 Special meetings. Consistent with the provisions of §§ 6.6 and 7.5 of these bylaws, the Chairman...

  11. 25 CFR 248.6 - Structures.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Structures. 248.6 Section 248.6 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR FISH AND WILDLIFE USE OF COLUMBIA RIVER INDIAN IN-LIEU FISHING SITES § 248.6 Structures. Dwellings, camping facilities, and other structures such as fish drying facilities...

  12. 32 CFR 756.6 - Negotiation.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Negotiation. 756.6 Section 756.6 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY CLAIMS PROCEDURES FOR PROCESSING CLAIMS INVOLVING NON-APPROPRIATED FUND ACTIVITIES AND THEIR EMPLOYEES § 756.6 Negotiation. (a) General. Claims from NAFIs should be processed primarily...

  13. 29 CFR 528.6 - Review.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Review. 528.6 Section 528.6 Labor Regulations Relating to... MINIMUM WAGE RATES § 528.6 Review. Any employer and, when appropriate, any apprenticeship agency or... order of annulment or withdrawal may obtain review, limited to the question of whether the findings of...

  14. 7 CFR 6.9 - Information.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Information. 6.9 Section 6.9 Agriculture Office of the Secretary of Agriculture IMPORT QUOTAS AND FEES General Provisions § 6.9 Information. Persons desiring information from the Department of Agriculture regarding section 22 or section 8(a), or any action with...

  15. 45 CFR 1624.6 - Employment.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Employment. 1624.6 Section 1624.6 Public Welfare... DISCRIMINATION ON THE BASIS OF DISABILITY § 1624.6 Employment. (a) No qualified person with a disability shall, on the basis of disability, be subjected to discrimination in employment by any legal services...

  16. 43 CFR 402.6 - Price.

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Price. 402.6 Section 402.6 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION, DEPARTMENT OF THE INTERIOR SALE OF LANDS IN FEDERAL RECLAMATION PROJECTS Public Lands § 402.6 Price. The price of land sold under this...

  17. Raised IL-6 Levels

    African Journals Online (AJOL)

    user

    Cardiovascular Associated Complications in HIV. Positive Zambians before ... compare plasma levels of IL-6 in HIV positive and. HIV negative .... cancer. Results from this study showed that IL-6 levels in. HIV positive ART naive individuals were significantly higher than in the HIV positive individuals on ART. Our findings ...

  18. DNS and BIND on IPv6

    CERN Document Server

    Liu, Cricket

    2011-01-01

    If you're preparing to roll out IPv6 on your network, this concise book provides the essentials you need to support this protocol with DNS. You'll learn how DNS was extended to accommodate IPv6 addresses, and how you can configure a BIND name server to run on the network. This book also features methods for troubleshooting problems with IPv6 forward- and reverse-mapping, and techniques for helping islands of IPv6 clients communicate with IPv4 resources. Topics include: DNS and IPv6-Learn the structure and representation of IPv6 addresses, and the syntaxes of AAAA and PTR records in the ip6.a

  19. New organic superconductors beta-(BDA-TTP)2X [BDA-TTP + 2,5-bis(1,3-dithian-2ylidene)-1,3,4,6-tetrathiapentalene; X(-) = SbF6(-), AsF6(-), and PF6(-)].

    Science.gov (United States)

    Yamada, J; Watanabe, M; Akutsu, H; Nakatsuji, S; Nishikawa, H; Ikemoto, I; Kikuchi, K

    2001-05-09

    The synthesis, electrochemical properties, and molecular structure of a new pi-electron donor, 2,5-bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene (BDA-TTP), is described. In contrast to the hitherto-known tetrachalcogenafulvalene pi-donors providing organic superconductors, this donor contains only the bis-fused 1,3-dithiole-2-ylidene unit as a pi-electron system, yet produces a series of ambient-pressure superconductors beta-(BDA-TTP)2X [X = SbF6 (magnetic T(c) = 6.9 K, resistive T(c) = 7.5 K), AsF6 (magnetic T(c) = 5.9 K, resistive T(c) = 5.8 K), and PF6 (magnetic T(c) = 5.9 K)], which are isostructural. The values of the intermolecular overlap integrals calculated on the donor layers of these superconductors suggest a two-dimensional (2D) electronic structure with loose donor packing. Tight-binding band calculations also indicate that these superconductors have the 2D band dispersion relations and closed Fermi surfaces.

  20. Crystal structure of the Hg4SiS6 and Hg4SiSe6 compounds

    International Nuclear Information System (INIS)

    Gulay, L.D.; Olekseyuk, I.D.; Parasyuk, O.V.

    2002-01-01

    The crystal structures of Hg 4 SiS 6 and Hg 4 SiSe 6 compounds were investigated using X-ray powder diffraction. These compounds crystallize in the monoclinic Cc space group with the lattice parameters a=1.23020(5), b=0.71031(4), c=1.22791(4) nm, β=109.721(3) deg. for Hg 4 SiS 6 and a=1.28110(4), b=0.74034(4), c=1.27471(1) nm, β=109.605(3) deg. for Hg 4 SiSe 6 . Atomic parameters were refined in the isotropic approximation (R I =0.0571 and R I =0.0555 for the Hg 4 SiS 6 and Hg 4 SiSe 6 , respectively)

  1. Vaccination with IL-6 analogues induces autoantibodies to IL-6 and influences experimentally induced inflammation

    DEFF Research Database (Denmark)

    Galle, Pia; Jensen, Lene; Andersson, Christina

    2007-01-01

    ; yet they appear healthy and do not exhibit overt clinical or laboratory abnormalities. We induced comparable levels of aAb-IL-6 in different mouse strains by vaccination with immunogenic IL-6 analogues. We observed that the induced aAb-IL-6 protected against collagen-induced arthritis and experimental...

  2. 36 CFR 504.6 - Gambling.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Gambling. 504.6 Section 504.6... INSTITUTION BUILDINGS AND GROUNDS § 504.6 Gambling. Participating in games for money or other personal property or the operation of gambling devices, the conduct of a lottery or pool, or the selling or...

  3. 32 CFR 553.6 - Donations.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Donations. 553.6 Section 553.6 National Defense... NATIONAL CEMETERIES § 553.6 Donations. (a) Policy. Under Department of the Army policy, proffered donations... for the donation or gift. (2) Delivery is made to the cemetery or to another point designated by the...

  4. 39 CFR 551.6 - Pricing.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Pricing. 551.6 Section 551.6 Postal Service UNITED STATES POSTAL SERVICE POSTAGE PROGRAMS SEMIPOSTAL STAMP PROGRAM § 551.6 Pricing. (a) The Semipostal Authorization Act, as amended by Public Law 107-67, section 652, 115 Stat. 514 (2001), prescribes that the price...

  5. 8 CFR 245.6 - Interview.

    Science.gov (United States)

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Interview. 245.6 Section 245.6 Aliens and... ADMITTED FOR PERMANENT RESIDENCE § 245.6 Interview. Each applicant for adjustment of status under this part shall be interviewed by an immigration officer. This interview may be waived in the case of a child...

  6. 8 CFR 1245.6 - Interview.

    Science.gov (United States)

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Interview. 1245.6 Section 1245.6 Aliens and... OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.6 Interview. Each applicant for adjustment of status under this part shall be interviewed by an immigration officer. This interview may be...

  7. 14 CFR 1310.6 - Staff.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Staff. 1310.6 Section 1310.6 Aeronautics... GUARANTEED LOAN § 1310.6 Staff. (a) Executive Director. The Executive Director advises and assists the Board... administration of the Board's actions, directs the activities of the staff, and performs such other duties as the...

  8. 12 CFR 352.6 - Employment.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Employment. 352.6 Section 352.6 Banks and... NONDISCRIMINATION ON THE BASIS OF DISABILITY § 352.6 Employment. No qualified individual with a disability shall, on the basis of that disability, be subjected to discrimination in employment in any program or activity...

  9. Remote Triggering of the Mw 6.9 Hokkaido Earthquake as a Result of the Mw 6.6 Indonesian Earthquake on September 11, 2008

    Directory of Open Access Journals (Sweden)

    Cheng-Horng Lin

    2012-01-01

    Full Text Available Only just recently, the phenomenon of earthquakes being triggered by a distant earthquake has been well established. Yet, most of the triggered earthquakes have been limited to small earthquakes (M < 3. Also, the exact triggering mechanism for earthquakes is still not clear. Here I show how one strong earthquake (Mw = 6.6 is capable of triggering another (Mw = 6.9 at a remote distance (~4750 km. On September 11, 2008, two strong earthquakes with magnitudes (Mw of 6.6 and 6.9 hit respectively in Indonesia and Japan within a short interval of ~21 minutes time. Careful examination of broadband seismograms recorded in Japan shows that the Hokkaido earthquake occurred just as the surface waves generated by the Indonesia earthquake arrived. Although the peak dynamic stress estimated at the focus of the Hokkaido earthquake was just reaching the lower bound for the capability of triggering earthquakes in general, a more plausible mechanism for triggering an earthquake might be attributed to the change of a fault property by fluid infiltration. These observations suggest that the Hokkaido earthquake was likely triggered from a remote distance by the surface waves generated from the Indonesia earthquake. If some more cases can be observed, a temporal warning of possible interaction between strong earthquakes might be concerned in the future.

  10. Substitution and Redox Chemistry of [Bu(4)N](2)[Ta(6)Cl(12)(OSO(2)CF(3))(6)].

    Science.gov (United States)

    Prokopuk, Nicholas; Kennedy, Vance O.; Stern, Charlotte L.; Shriver, Duward F.

    1998-09-21

    Two sequential electrochemical reductions occur for the cluster anion [Ta(6)Cl(12)(OSO(2)CF(3))(6)](2)(-) at 0.89 and 0.29 V vs Ag/AgCl, with the generation [Ta(6)Cl(12)(OSO(2)CF(3))(6)](3)(-) and [Ta(6)Cl(12)(OSO(2)CF(3))(6)](4)(-). Chemical reduction of [Ta(6)Cl(12)(OSO(2)CF(3))(6)](2)(-) by ferrocene produces [Ta(6)Cl(12)(OSO(2)CF(3))(6)](3)(-) with the concomitant shift of the nu(SO(2)) stretch from 1002 to 1018 cm(-)(1). Reaction of [Bu(4)N](2)[Ta(6)Cl(12)(OSO(2)CF(3))(6)] (1) with [Bu(4)N]X (X = Cl, Br, I, NCS) occurs by reduction and substitution, yielding [Bu(4)N](3)[Ta(6)Cl(12)X(6)], where the clusters with X = Br, I, and NCS are new. Spectroscopic (IR and UV-vis) evidence indicates that the reduced cluster core {Ta(6)Cl(12)}(2+) is produced in reaction mixtures of 1 with the halide and pseudohalide ions. Concomitant substitution of the triflate ligands of 1 by X(-) occurs and the rates for the overall reduction and substitution increase in the order X(-) = Cl(-) < Br(-) < NCS(-) < I(-) < CN(-). Reduction of 1 with ferrocene followed by addition of [Bu(4)N]O(2)CCH(3) produces the new cluster [Ta(6)Cl(12)(O(2)CCH(3))(6)](3)(-) isolated as the tetrabutylammonium salt. Cyclic voltammetry and UV-vis spectroscopy on the new clusters [Bu(4)N](3)[Ta(6)Cl(12)X(6)] (X = Br, I, NCS, and O(2)CCH(3)) are reported. Crystal data for [Bu(4)N](3)[Ta(6)Cl(12)(NCS)(6)].CH(2)Cl(2): monoclinic, space group, P2(1)/c (No. 14); a = 25.855(6) Å, b = 21.843(6) Å, c = 16.423(3) Å; beta = 100.03(2) degrees; V = 9133(3) Å(3); Z = 4.

  11. Linear and non-linear video and TV applications using IPv6 and IPv6 multicast

    CERN Document Server

    Minoli, Daniel

    2012-01-01

    Provides options for implementing IPv6 and IPv6 multicast in service provider networks New technologies, viewing paradigms, and content distribution approaches are taking the TV/video services industry by storm. Linear and Nonlinear Video and TV Applications: Using IPv6 and IPv6 Multicast identifies five emerging trends in next-generation delivery of entertainment-quality video. These trends are observable and can be capitalized upon by progressive service providers, telcos, cable operators, and ISPs. This comprehensive guide explores these evolving directions in the TV/v

  12. Thermoelectric properties of M{sub 2}Mo{sub 6}Se{sub 6} (M =Tl,In)

    Energy Technology Data Exchange (ETDEWEB)

    Verebelyi, D T; Payne, J E; Tessema, G X; Mengistu, E

    1997-07-01

    The authors have measured the thermal conductivity of Tl{sub 2}Mo{sub 6}Se{sub 6}, a quasi-one dimensional conductor which belongs to the family of M{sub 2}Mo{sub 6}X{sub 6} linear chain compounds. Using these results and the measurements of the Seebeck coefficient and the electrical conductivity the authors estimate the dimensionless figure of merit to be of the order of 0.08. This result suggest that this compound and other related compounds are good potential TE.

  13. Structural Stability and Electronic Properties of Na2C6O6 for a Rechargeable Sodium-ion Battery

    Science.gov (United States)

    Yamashita, Tomoki; Fujii, Akihiro; Momida, Hiroyoshi; Oguchi, Tamio

    2014-03-01

    Sodium-ion batteries have been explored as a promising alternative to lithium-ion batteries owing to a significant advantage of a natural abundance of sodium. Recently, it has been reported that disodium rhodizonate, Na2C6O6, exhibit good electrochemical properties and cycle performance as a minor-metal free organic cathode for sodium-ion batteries. However, its crystal structures during discharge/charge cycle still remain unclear. In this work, we theoretically propose feasible crystal structures of Na2+xC6O6 using first principles calculations. A structural phase transition has been found: Na4C6O6 has a different C6O6 packing arrangement from Na2C6O6. Electronic structures of Na2+xC6O6 during discharge/charge cycle are also discussed. Our predictions could be the key to understanding the discharge/charge process of Na2C6O6. Supported by MEXT program ``Elements Strategy Initiative to Form Core Rersearch Center'' (since 2012), MEXT; Ministry of Education Culture, Sports, Science and Technology, Japan.

  14. Sensitization of dural afferents underlies migraine-related behavior following meningeal application of interleukin-6 (IL-6

    Directory of Open Access Journals (Sweden)

    Yan Jin

    2012-01-01

    Full Text Available Abstract Background Migraine headache is one of the most common neurological disorders, but the pathophysiology contributing to migraine is poorly understood. Intracranial interleukin-6 (IL-6 levels have been shown to be elevated during migraine attacks, suggesting that this cytokine may facilitate pain signaling from the meninges and contribute to the development of headache. Methods Cutaneous allodynia was measured in rats following stimulation of the dura with IL-6 alone or in combination with the MEK inhibitor, U0126. The number of action potentials and latency to the first action potential peak in response to a ramp current stimulus as well as current threshold were measured in retrogradely-labeled dural afferents using patch-clamp electrophysiology. These recordings were performed in the presence of IL-6 alone or in combination with U0126. Association between ERK1 and Nav1.7 following IL-6 treatment was also measured by co-immunoprecipitation. Results Here we report that in awake animals, direct application of IL-6 to the dura produced dose-dependent facial and hindpaw allodynia. The MEK inhibitor U0126 blocked IL-6-induced allodynia indicating that IL-6 produced this behavioral effect through the MAP kinase pathway. In trigeminal neurons retrogradely labeled from the dura, IL-6 application decreased the current threshold for action potential firing. In response to a ramp current stimulus, cells treated with IL-6 showed an increase in the numbers of action potentials and a decrease in latency to the first spike, an effect consistent with phosphorylation of the sodium channel Nav1.7. Pretreatment with U0126 reversed hyperexcitability following IL-6 treatment. Moreover, co-immunoprecipitation experiments demonstrated an increased association between ERK1 and Nav1.7 following IL-6 treatment. Conclusions Our results indicate that IL-6 enhances the excitability of dural afferents likely via ERK-mediated modulation of Nav1.7 and these responses

  15. Introducing the ESAT-6 free IGRA, a companion diagnostic for TB vaccines based on ESAT-6

    DEFF Research Database (Denmark)

    Ruhwald, Morten; de Thurah, Lena; Kuchaka, Davis

    2017-01-01

    tests unspecific after vaccination. This challenge has prompted the development of a companion diagnostic for ESAT-6 based vaccines, an ESAT-6 free IGRA. We screened a panel of seven potential new diagnostic antigens not recognized in BCG vaccinated individuals. Three highly recognized antigens Esp......C, EspF and Rv2348c were identified and combined with CFP10 in an ESAT-6 free antigen cocktail. The cocktail was prepared in a field-friendly format, lyophilized with heparin in ready-to-use vacutainer tubes. The diagnostic performance of the ESAT-6 free IGRA was determined in a cross-validation study....... Compared IGRA, the ESAT-6 free IGRA induced a comparable magnitude of IFN-γ release, and the diagnostic performance was on par with Quantiferon (sensitivity 84% vs 79%; specificity 99% vs 97%). The comparable performance of the ESAT-6 free IGRA to IGRA suggests potential as companion diagnostic for ESAT-6...

  16. 39 CFR 964.6 - Default.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Default. 964.6 Section 964.6 Postal Service UNITED STATES POSTAL SERVICE PROCEDURES RULES OF PRACTICE GOVERNING DISPOSITION OF MAIL WITHHELD FROM DELIVERY PURSUANT TO 39 U.S.C. 3003, 3004 § 964.6 Default. If a Petitioner fails to appear at the hearing without...

  17. 43 CFR 8.6 - Buildings.

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Buildings. 8.6 Section 8.6 Public Lands: Interior Office of the Secretary of the Interior JOINT POLICIES OF THE DEPARTMENTS OF THE INTERIOR AND OF THE ARMY RELATIVE TO RESERVOIR PROJECT LANDS § 8.6 Buildings. Buildings for human occupancy as well as...

  18. 16 CFR 305.6 - Sampling.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Sampling. 305.6 Section 305.6 Commercial... ENERGY POLICY AND CONSERVATION ACT (âAPPLIANCE LABELING RULEâ) Testing § 305.6 Sampling. (a) For any... based upon the sampling procedures set forth in § 430.24 of 10 CFR part 430, subpart B. (b) For any...

  19. 38 CFR 7.6 - Benefits.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Benefits. 7.6 Section 7.6... Soldiers' and Sailors' Civil Relief Act Amendments of 1942 § 7.6 Benefits. Any policy found to be entitled... such monetary benefits arising out of the contract or by reason thereof, will be held subject to...

  20. 31 CFR 342.6 - Taxation.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Taxation. 342.6 Section 342.6 Money... OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS NOTES § 342.6 Taxation..., whether Federal or State, but are exempt from all other taxation now or hereafter imposed on the principal...

  1. 29 CFR 4221.6 - Hearing.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Hearing. 4221.6 Section 4221.6 Labor Regulations Relating... PLANS ARBITRATION OF DISPUTES IN MULTIEMPLOYER PLANS § 4221.6 Hearing. (a) Time and place of hearing established. Unless the parties agree to proceed without a hearing as provided in § 4221.5(c), the parties and...

  2. 36 CFR 34.6 - Fires.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Fires. 34.6 Section 34.6... ADMINISTRATIVE SITE REGULATIONS § 34.6 Fires. (a) All wildland, vehicular or structural fires shall be reported... Fire Laws and Regulations are adopted as a part of this part. Violation of any of these regulations is...

  3. Fluxional behavior of molecular WMe6 and of silica grafted WMe6

    KAUST Repository

    Credendino, Raffaele

    2015-02-09

    Using DFT methods we describe the fluxional behavior of mono-, bi-, and tripodal W(CH3)6 species grafted on partially dehydroxylated silica. Our results show that the umbrella inversion mechanism described to explain the fluxionality of the parent W(CH3)6 molecule is not operative after grafting on silica. Low-energy turnstile rotations are instead operative for all considered species, correlating the experimental values found in solid-state NMR.

  4. Fluxional behavior of molecular WMe6 and of silica grafted WMe6

    KAUST Repository

    Credendino, Raffaele; Vignola, Emanuele; Poater, Albert; Callens, Emmanuel; Basset, Jean-Marie; Cavallo, Luigi

    2015-01-01

    Using DFT methods we describe the fluxional behavior of mono-, bi-, and tripodal W(CH3)6 species grafted on partially dehydroxylated silica. Our results show that the umbrella inversion mechanism described to explain the fluxionality of the parent W(CH3)6 molecule is not operative after grafting on silica. Low-energy turnstile rotations are instead operative for all considered species, correlating the experimental values found in solid-state NMR.

  5. 7α-Methoxycarbonyl-6,7,8,14-tetrahydro-6,14-endo-ethenothebaine

    Directory of Open Access Journals (Sweden)

    Mustafa Odabaşoğlu

    2009-04-01

    Full Text Available In the molecule of the title compound, C23H27NO5, the furan ring adopts an envelope conformation. Intramolecular C—H...O interactions result in the formation of S(5 and S(6 motifs. In the crystal structure, weak intermolecular C—H...O hydrogen bonds link the molecules through C(6 and C(8 chains along the [100] and [010] directions, generating a two-dimensional network.

  6. Current Status of IPv6 Management

    OpenAIRE

    Astic , Isabelle; Festor , Olivier

    2002-01-01

    Nowadays, we are at an important time of the development of the IPv6 (Internet Protocol version 6) network. Until now, this protocol was used only between IPv6 «islands». These islands were connected by IPv4 (Internet Protocol version 4) networks. So the transport of IPv6 packets was made through IPv4 ones, or into MPLS (MultiProtocol Label Switching) tunnels. Now, that real IPv6 native equipment appears, it is possible to create real native IPv6 networks.Because in these networks, IPv4 does ...

  7. Esimerkkiyrityksen IPv6-lähiverkko

    OpenAIRE

    Palkki, Ville

    2013-01-01

    Insinöörityön tavoitteena oli suunnitella ja toteuttaa esimerkkiyrityksen IPv6-lähiverkko. Toisena tavoitteena oli suunnitella esimerkkiyrityksen siirtyminen IPv4-protokollasta IPv6-protokollaan. Työssä käsiteltiin IPv6-protokollaa ensin teoreettisesti ja tämän jälkeen suunniteltiin sekä rakennettiin toimiva IPv6-lähiverkko. Aluksi työssä käytiin läpi IPv6-protokollan etuja verrattuna vanhaan IPv4-protokollaan. Teoriaosuudessa selvitettiin myös IPv6-protokollan rakennetta ja lähetysformaa...

  8. RNA epitranscriptomics: Regulation of infection of RNA and DNA viruses by N6 -methyladenosine (m6 A).

    Science.gov (United States)

    Tan, Brandon; Gao, Shou-Jiang

    2018-04-26

    N 6 -methyladenosine (m 6 A) was discovered 4 decades ago. However, the functions of m 6 A and the cellular machinery that regulates its changes have just been revealed in the last few years. m 6 A is an abundant internal mRNA modification on cellular RNA and is implicated in diverse cellular functions. Recent works have demonstrated the presence of m 6 A in the genomes of RNA viruses and transcripts of a DNA virus with either a proviral or antiviral role. Here, we first summarize what is known about the m 6 A "writers," "erasers," "readers," and "antireaders" as well as the role of m 6 A in mRNA metabolism. We then review how the replications of numerous viruses are enhanced and restricted by m 6 A with emphasis on the oncogenic DNA virus, Kaposi sarcoma-associated herpesvirus (KSHV), whose m 6 A epitranscriptome was recently mapped. In the context of KSHV, m 6 A and the reader protein YTHDF2 acts as an antiviral mechanism during viral lytic replication. During viral latency, KSHV alters m 6 A on genes that are implicated in cellular transformation and viral latency. Lastly, we discuss future studies that are important to further delineate the functions of m 6 A in KSHV latent and lytic replication and KSHV-induced oncogenesis. Copyright © 2018 John Wiley & Sons, Ltd.

  9. Piezoelectric ceramic material, containing PbNb2O6, K2Nb2O6

    International Nuclear Information System (INIS)

    Fesenko, E.G.; Filip'ev, V.S.; Razumovskaya, O.N.; Cherner, Ya.E.; Rudkovskaya, L.M.; Zav'yalov, V.P.; Molchanova, R.A.; Kryshtop, V.G.; Panich, A.E.; Servuli, V.A.

    1984-01-01

    A new piezoelectric ceramic material including PbNb 2 O 6 , K 2 Nb 2 O 6 is prepared. Above the new material contains Nb 2 O 5 . The invention relates to piezotechnique. The principal advantage of this material for acoustic converters is high anisotropy of piezoelectric properties as well as high Curie temperature (T C =539-553 deg C). The composition containing 93.96 mole% PbNb 2 O 6 ; 2.48 mole% K 2 Nb 2 O 6 and 3.56 mole% Nb 2 O 5 has optimum content of parameters

  10. Thermogravimetric investigations on A(H2O)6BX6 complexes and the formation of ABX6 and ABO3 structures

    NARCIS (Netherlands)

    Heilbron, M.A.; Gellings, P.J.

    1976-01-01

    Thermogravimetry (TG) of A(H2O)6BX6 complexes are presented, with A = Cd2+, Co2+, Cu2+, Fe2+, Mg2+, Mn2+, Ni2+, Pb2+, Zn2+, B=Si4+, Sn4+, Ti4+, Zr4+, and X=Cl−, F−. On a selected number of complexes, differential thermal analyses (DTA) and differential scanning calorimetric measurements (DSC) have

  11. 7 CFR 1006.6 - Supply plant.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Supply plant. 1006.6 Section 1006.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Handling Definitions § 1006.6 Supply plant. See § 1000.6. ...

  12. 7 CFR 1033.6 - Supply plant.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Supply plant. 1033.6 Section 1033.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Handling Definitions § 1033.6 Supply plant. See § 1000.6. ...

  13. 7 CFR 1005.6 - Supply plant.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Supply plant. 1005.6 Section 1005.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Handling Definitions § 1005.6 Supply plant. See § 1000.6. ...

  14. 7 CFR 1030.6 - Supply plant.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Supply plant. 1030.6 Section 1030.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Handling Definitions § 1030.6 Supply plant. See § 1000.6. ...

  15. 7 CFR 1007.6 - Supply plant.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Supply plant. 1007.6 Section 1007.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Handling Definitions § 1007.6 Supply plant. See § 1000.6. ...

  16. 7 CFR 1032.6 - Supply plant.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Supply plant. 1032.6 Section 1032.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Handling Definitions § 1032.6 Supply plant. See § 1000.6. ...

  17. 7 CFR 1126.6 - Supply plant.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Supply plant. 1126.6 Section 1126.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Handling Definitions § 1126.6 Supply plant. See § 1000.6. ...

  18. 7 CFR 1001.6 - Supply plant.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Supply plant. 1001.6 Section 1001.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Handling Definitions § 1001.6 Supply plant. See § 1000.6. ...

  19. 7 CFR 1131.6 - Supply plant.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Supply plant. 1131.6 Section 1131.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Handling Definitions § 1131.6 Supply plant. See § 1000.6. ...

  20. Synthesis and characterization of 6,6'-(2,4,6-triisopropylphenyl)-2,2'-bipyridine (tripbipy) and its complexes of the late first row transition metals.

    Science.gov (United States)

    Benson, Eric E; Rheingold, Arnold L; Kubiak, Clifford P

    2010-02-15

    The synthesis of tripbipy, a new substituted bipyridine ligand (6,6'-(2,4,6-triisopropylphenyl)-2,2'-bipyridine), and the syntheses, structures, and magnetic properties of the first coordination compounds based on this ligand are described. Tripbipy was synthesized by the Suzuki coupling of 2,4,6-triisopropylphenyl boronic acid and 6,6'-dibromo-2,2'-bipyridine. Reported here are the tripbipy complexes of five late first row transition metal chlorides (MCl(2); M = Fe, Co, Ni, Cu, Zn). Four of the complexes MCl(2)tripbipy (M = Fe, Co, Ni, Zn) crystallize in the space group P2(1)/c and are isomorphous with one solvent molecule of crystallization. The complex CuCl(2)tripbipy crystallizes in the space group P2(1)2(1)2(1) with two solvent molecules of crystallization. All MCl(2)tripbipy complexes are four coordinate and contain distorted tetrahedral metal centers. CuCl(2)tripbipy shows a pseudo Jahn-Teller distortion, and X-band electron paramagnetic resonance (EPR) in a toluene glass gives approximate g( perpendicular, parallel) values of 2.2 and 2.1. Magnetic measurements (M = Fe, Co, Ni, Cu) are consistent with high spin d(n) configurations (n = 6-9, S = 2, 3/2, 1, 1/2) tetrahedral complexes and give chi(M)T values at 300 K of 3.56, 2.10, 1.01, and 0.37 cm(3) M(-1) K, respectively.

  1. Mechanism for 6-methylcoumarin photoallergenicity

    International Nuclear Information System (INIS)

    Kato, S.; Seki, T.; Katsumura, Y.; Kobayashi, T.; Komatsu, K.; Fukushima, S.

    1985-01-01

    6-Methylcoumarin (6-MC), a synthetic fragrance material, has been reported to be photoallergenic both in man and in guinea pigs. To elucidate the possible mechanism of photoallergenicity, 6-MC in ethanolic solution was exposed to 200 joules/cm2 of long-wavelength ultraviolet (UV) ranging from 320 to 400 nm for 16 hr, and was examined for its contact allergenicity by means of a modified guinea pig maximization test. Strong allergic responses were observed, indicating that UV plays a catalytic role in forming contact allergens during irradiation. The solution was fractionated to isolate and purify contact sensitizers by gel-permeation chromatography and high-performance liquid chromatography. By employing mass spectrometry and proton and carbon-13 nuclear magnetic resonance, mono- and diethyl esters of 6-MC dimer were compounds identified which showed allergic reactions in guinea pigs sensitized with UV-irradiated 6-MC

  2. Synthesis of B6 vitamin

    Directory of Open Access Journals (Sweden)

    Vučijak Nevena Ž.

    2009-01-01

    Full Text Available The importance of vitamin B6 has been known since its discovery in the 1940's. Chemical tests, elestrometric titration determinations, and absorption spectrum studies showed that this vitamin exists in three major chemical forms: pyridoxine (an alcohol, pyridoxal (an aldehyde, and pyridoxamine (a primary amine. Vitamin B6 is needed for more than 100 enzymes involved in protein metabolism, and it is assumed that this vitamin is cofactor of metabolic processes more important than any other substance. A deficiency of vitamin B6 in the human diet leads to severe disorders. Vitamin B6 is necessary for the proper function of the immune and nervous system, and helps the body convert protein to energy. This paper describes the history, properties and applications of vitamin B6, elucidation of chemical structure, and different procedures for synthesis of pyridoxine and pyridoxamine.

  3. m6A-Driver: Identifying Context-Specific mRNA m6A Methylation-Driven Gene Interaction Networks

    OpenAIRE

    Zhang, Song-Yao; Zhang, Shao-Wu; Liu, Lian; Meng, Jia; Huang, Yufei

    2016-01-01

    As the most prevalent mammalian mRNA epigenetic modification, N6-methyladenosine (m6A) has been shown to possess important post-transcriptional regulatory functions. However, the regulatory mechanisms and functional circuits of m6A are still largely elusive. To help unveil the regulatory circuitry mediated by mRNA m6A methylation, we develop here m6A-Driver, an algorithm for predicting m6A-driven genes and associated networks, whose functional interactions are likely to be actively modulated ...

  4. Mechanisms of the p(He 6,He 5)d, p(He 6,α)t and p(He 6,t)α reactions

    International Nuclear Information System (INIS)

    Heiberg-Andersen, Henning

    2002-07-01

    This work was devoted to nucleon induced transfer reactions having the potential to probe the sub-cluster structures of the benchmark halo nucleus He 6, without the question marks the necessarily omitted exchange effects tend to put behind the CRC results when both collision partners are composite systems. Still, the exchange complications entered the analysis in an ironic way: The high Q-value of the p(He 6,α)t and p(He 6, t)α reactions caused sensitivity to the t - α optical potential at small radii, where the one-nucleon exchange effects are strongest. Since the attempt to throw them out of the extracted tau - α potential failed, it was necessary to extend the model space to avoid a too difficult modelling of the local equivalent t - α potential. By this step, all the complications originating from antisymmetrization within a larger model space entered the analysis. However, the persistent failures of the two-channel calculations of this and previous works can hardly be due to incorrect treatment of exchange effects only, so the loss of simplicity is probably illusory. Even at small angles, where the surface processes dominate, none of the two-channel calculations with various choices of t - α optical potentials managed to reproduce the p(He 6, α)t (p(He 6,t)α) data. This motivated inclusion of sequential transfers through the d + He 5 channel, where the sequential triton transfer process, included just for consistency in the coupling scheme of the four-channel calculation, turned out to be more influent than expected. The satisfactory reproduction of both the p(He 6, He 5)d and the p(He 6,α)t (p(He 6,t)α) data by the four-channel approach and the required re-normalization the real part of the p - He 6 optical potential are strong indications of substantial contributions from sequential transfer of the halo neutrons at this energy. The conclusions that can be drawn from this work are limited by the modest amount of available data. This limitation does

  5. Mechanisms of the p(He 6,He 5)d, p(He 6,{alpha})t and p(He 6,t){alpha} reactions

    Energy Technology Data Exchange (ETDEWEB)

    Heiberg-Andersen, Henning

    2002-07-01

    This work was devoted to nucleon induced transfer reactions having the potential to probe the sub-cluster structures of the benchmark halo nucleus He 6, without the question marks the necessarily omitted exchange effects tend to put behind the CRC results when both collision partners are composite systems. Still, the exchange complications entered the analysis in an ironic way: The high Q-value of the p(He 6,{alpha})t and p(He 6, t){alpha} reactions caused sensitivity to the t - {alpha} optical potential at small radii, where the one-nucleon exchange effects are strongest. Since the attempt to throw them out of the extracted tau - {alpha} potential failed, it was necessary to extend the model space to avoid a too difficult modelling of the local equivalent t - {alpha} potential. By this step, all the complications originating from antisymmetrization within a larger model space entered the analysis. However, the persistent failures of the two-channel calculations of this and previous works can hardly be due to incorrect treatment of exchange effects only, so the loss of simplicity is probably illusory. Even at small angles, where the surface processes dominate, none of the two-channel calculations with various choices of t - {alpha} optical potentials managed to reproduce the p(He 6, {alpha})t (p(He 6,t){alpha}) data. This motivated inclusion of sequential transfers through the d + He 5 channel, where the sequential triton transfer process, included just for consistency in the coupling scheme of the four-channel calculation, turned out to be more influent than expected. The satisfactory reproduction of both the p(He 6, He 5)d and the p(He 6,{alpha})t (p(He 6,t){alpha}) data by the four-channel approach and the required re-normalization the real part of the p - He 6 optical potential are strong indications of substantial contributions from sequential transfer of the halo neutrons at this energy. The conclusions that can be drawn from this work are limited by the

  6. Papillomavirus E6 proteins

    International Nuclear Information System (INIS)

    Howie, Heather L.; Katzenellenbogen, Rachel A.; Galloway, Denise A.

    2009-01-01

    The papillomaviruses are small DNA viruses that encode approximately eight genes, and require the host cell DNA replication machinery for their viral DNA replication. Thus papillomaviruses have evolved strategies to induce host cell DNA synthesis balanced with strategies to protect the cell from unscheduled replication. While the papillomavirus E1 and E2 genes are directly involved in viral replication by binding to and unwinding the origin of replication, the E6 and E7 proteins have auxillary functions that promote proliferation. As a consequence of disrupting the normal checkpoints that regulate cell cycle entry and progression, the E6 and E7 proteins play a key role in the oncogenic properties of human papillomaviruses with a high risk of causing anogenital cancers (HR HPVs). As a consequence, E6 and E7 of HR HPVs are invariably expressed in cervical cancers. This article will focus on the E6 protein and its numerous activities including inactivating p53, blocking apoptosis, activating telomerase, disrupting cell adhesion, polarity and epithelial differentiation, altering transcription and reducing immune recognition

  7. 7 CFR 1124.6 - Supply plant.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Supply plant. 1124.6 Section 1124.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Regulating Handling Definitions § 1124.6 Supply plant. See § 1000.6. ...

  8. 9 CFR 91.6 - Goats.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Goats. 91.6 Section 91.6 Animals and... EXPORTATION Diagnostic Tests, Treatments § 91.6 Goats. (a) In order to be eligible for export, goats shall be...) Tuberculosis. All goats over 1 month of age shall be negative to a caudal intradermal tuberculin test using 0.1...

  9. Burnup calculation of a CANDU6 reactor using the Serpent and MCNP6 codes

    Energy Technology Data Exchange (ETDEWEB)

    Hussein, M.S.; Bonin, H.W., E-mail: mohamed.hussein@rmc.ca, E-mail: bonin-h@rmc.ca [Royal Military College of Canada, Dept. of Chemistry and Chemical Engineering, Kingston, ON (Canada); Lewis, B.J., E-mail: Brent.Lewis@uoit.ca [Univ. of Ontario Inst. of Tech., Faculty of Energy Systems and Nuclear Science, Oshawa, ON (Canada)

    2014-07-01

    A study of fuel burnup for the CANDU6 reactor is carried out to validate the most recent versions of the probabilistic transport code (MCNP6) and the continuous energy burnup calculation code (Serpent). These two codes allow for 3-D geometry calculation accounting for a detailed analysis without unit-cell homogenization. On the other hand, the WIMS-AECL computer program is used to model neutron transport in nuclear-reactor lattices for design, safety analysis, and operation. It works with two-dimensional regions and can perform collision probability calculations for a periodic structure of the lattice cell. In the present work, the multiplication factor, the total flux and fuel burnup could be calculated for a CANDU6 nuclear reactor based on the GENTILLY-2 core design. The MCNP6 and Serpent codes provide a calculation of the track length estimated flux per neutron source. This estimated flux is then scaled with normalization to the reactor power in order to provide a flux in unit of n/cm{sup 2}s. Good agreement is observed between the actual total flux calculated by MCNP6, Serpent and WIMS-AECL. The effective multiplication factors of the whole core CANDU6 reactor are further calculated as a function of burnup and further compared to those calculated by WIMS-AECL where excellent agreement is also obtained. (author)

  10. Burnup calculation of a CANDU6 reactor using the Serpent and MCNP6 codes

    International Nuclear Information System (INIS)

    Hussein, M.S.; Bonin, H.W.; Lewis, B.J.

    2014-01-01

    A study of fuel burnup for the CANDU6 reactor is carried out to validate the most recent versions of the probabilistic transport code (MCNP6) and the continuous energy burnup calculation code (Serpent). These two codes allow for 3-D geometry calculation accounting for a detailed analysis without unit-cell homogenization. On the other hand, the WIMS-AECL computer program is used to model neutron transport in nuclear-reactor lattices for design, safety analysis, and operation. It works with two-dimensional regions and can perform collision probability calculations for a periodic structure of the lattice cell. In the present work, the multiplication factor, the total flux and fuel burnup could be calculated for a CANDU6 nuclear reactor based on the GENTILLY-2 core design. The MCNP6 and Serpent codes provide a calculation of the track length estimated flux per neutron source. This estimated flux is then scaled with normalization to the reactor power in order to provide a flux in unit of n/cm 2 s. Good agreement is observed between the actual total flux calculated by MCNP6, Serpent and WIMS-AECL. The effective multiplication factors of the whole core CANDU6 reactor are further calculated as a function of burnup and further compared to those calculated by WIMS-AECL where excellent agreement is also obtained. (author)

  11. K-6 Science Curriculum.

    Science.gov (United States)

    Blueford, J. R.; And Others

    A unified science approach is incorporated in this K-6 curriculum mode. The program is organized into six major cycles. These include: (1) science, math, and technology cycle; (2) universe cycle; (3) life cycle; (4) water cycle; (5) plate tectonics cycle; and (6) rock cycle. An overview is provided of each cycle's major concepts. The topic…

  12. 49 CFR 552.6 - Technical review.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Technical review. 552.6 Section 552.6... § 552.6 Technical review. The appropriate Associate Administrator conducts a technical review of the petition. The technical review may consist of an analysis of the material submitted, together with...

  13. 41 CFR 101-6.202 - Purpose.

    Science.gov (United States)

    2010-07-01

    ... FEDERAL PROPERTY MANAGEMENT REGULATIONS GENERAL 6-MISCELLANEOUS REGULATIONS 6.2-Nondiscrimination in Programs Receiving Federal Financial Assistance § 101-6.202 Purpose. The purpose of this subpart is to... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Purpose. 101-6.202...

  14. Nylon-6/rubber blends: 6. Notched tensile impact testing of nylon-6(ethylene-propylene rubber) blends

    NARCIS (Netherlands)

    Dijkstra, Krijn; Dijkstra, K.; ter Laak, J.A.; ter Laak, J.; Gaymans, R.J.

    1994-01-01

    The deformation and fracture behaviour of nylon-6/EPR (ethylene-propylene rubber) blends is studied as a function of strain rate and rubber content. Therefore, tensile experiments are conducted on notched specimens over a broad range of draw speeds (including strain rates as encountered in normal

  15. Global Validation of MODIS C6 and C6.1 Merged Aerosol Products over Diverse Vegetated Surfaces

    Directory of Open Access Journals (Sweden)

    Muhammad Bilal

    2018-03-01

    Full Text Available In this study, the MODerate resolution Imaging Spectroradiometer (MODIS Collections 6 and 6.1 merged Dark Target (DT and Deep Blue (DB aerosol products (DTBC6 and DTBC6.1 at 0.55 µm were validated from 2004–2014 against Aerosol Robotic Network (AERONET Version 2 Level 2.0 AOD obtained from 68 global sites located over diverse vegetated surfaces. These surfaces were categorized by static values of monthly Normalized Difference Vegetation Index (NDVI observations obtained for the same time period from the MODIS level-3 monthly NDVI product (MOD13A3, i.e., partially/non–vegetated (NDVIP ≤ 0.3, moderately–vegetated (0.3 < NDVIM ≤ 0.5 and densely–vegetated (NDVID > 0.5 surfaces. The DTBC6 and DTBC6.1 AOD products are accomplished by the NDVI criteria: (i use the DT AOD retrievals for NDVI > 0.3, (ii use the DB AOD retrievals for NDVI < 0.2, and (iii use an average of the DT and DB AOD retrievals or the available one with highest quality assurance flag (DT: QAF = 3; DB: QAF ≥ 2 for 0.2 ≤ NDVI ≤ 0.3. For comparison purpose, the DTBSMS AOD retrievals were included which were accomplished using the Simplified Merge Scheme, i.e., use an average of the DTC6.1 and DBC6.1 AOD retrievals or the available one for all the NDVI values. For NDVIP surfaces, results showed that the DTBC6 and DTBC6.1 AOD retrievals performed poorly over North and South America in terms of the agreement with AERONET AOD, and over Asian region in terms of retrievals quality as the small percentage of AOD retrievals were within the expected error (EE = ± (0.05 + 0.15 × AOD. For NDVIM surfaces, retrieval errors and poor quality in DTBC6 and DTBC6.1 were observed for Asian, North American and South American sites, whereas good performance, was observed for European and African sites. For NDVID surfaces, DTBC6 does not perform well over the Asian and North American sites, although it contains retrievals only from the DT algorithm which was developed for dark surfaces

  16. Sensor proxy mobile IPv6 (SPMIPv6)--a novel scheme for mobility supported IP-WSNs.

    Science.gov (United States)

    Islam, Md Motaharul; Huh, Eui-Nam

    2011-01-01

    IP based Wireless Sensor Networks (IP-WSNs) are gaining importance for their broad range of applications in health-care, home automation, environmental monitoring, industrial control, vehicle telematics and agricultural monitoring. In all these applications, mobility in the sensor network with special attention to energy efficiency is a major issue to be addressed. Host-based mobility management protocols are not suitable for IP-WSNs because of their energy inefficiency, so network based mobility management protocols can be an alternative for the mobility supported IP-WSNs. In this paper we propose a network based mobility supported IP-WSN protocol called Sensor Proxy Mobile IPv6 (SPMIPv6). We present its architecture, message formats and also evaluate its performance considering signaling cost, mobility cost and energy consumption. Our analysis shows that with respect to the number of IP-WSN nodes, the proposed scheme reduces the signaling cost by 60% and 56%, as well as the mobility cost by 62% and 57%, compared to MIPv6 and PMIPv6, respectively. The simulation results also show that in terms of the number of hops, SPMIPv6 decreases the signaling cost by 56% and 53% as well as mobility cost by 60% and 67% as compared to MIPv6 and PMIPv6 respectively. It also indicates that proposed scheme reduces the level of energy consumption significantly.

  17. Development of 6.6 kV/600 A superconducting fault current limiter using coated conductors

    Energy Technology Data Exchange (ETDEWEB)

    Yazawa, T., E-mail: takashi.yazawa@toshiba.co.j [Toshiba Corporation, Power Systems Company (Japan); Koyanagi, K.; Takahashi, M.; Toba, K.; Takigami, H.; Urata, M. [Toshiba Corporation, Power Systems Company (Japan); Iijima, Y.; Saitoh, T. [Fujikura Ltd. (Japan); Amemiya, N. [Superconductivity Research Laboratory, ISTEC (Japan); Shiohara, Y. [Department of Electrical Engineering, Kyoto University (Japan); Ito, T. [Tokyo Gas Co., Ltd. (Japan)

    2009-10-15

    As one of the programs in the Ministry of Economy, Trade and Industry (METI) project regarding R and D on superconducting coated conductor, three-phase superconducting fault current limiter (SFCL) for 6.6 kV application was developed and successfully tested. The developed SFCL was mainly comprised three-phase set of current limiting coils installed in a sub-cooled nitrogen cryostat with a GM cryocooler, circuit breakers and a sequence circuit. The whole system was installed in a cubicle. Two tapes of coated conductor were wound in parallel in each coil to obtain the rated current of 72 A rms. After developing the whole SFCL system, short circuit experiments were implemented with a short circuit generator. In a three-line ground fault test, the SFCL successfully restricted the prospected short circuit current over 1.6 kA to about 800 A by the applied voltage of 6.6 kV. The SFCL was installed in a user field and connected with a gas engine generator, followed by a consecutive operation. In this program, 600 A class FCL coil, with which four coated conductor tapes were wound, was also developed. The coil showed sufficiently low AC loss at the rated current. With these results, the program attained the planned target of the fundamentals for the 6.6 kV/600 A SFCL.

  18. Human papillomavirus type 16 E6-specific antitumor immunity is induced by oral administration of HPV16 E6-expressing Lactobacillus casei in C57BL/6 mice.

    Science.gov (United States)

    Lee, Tae-Young; Kim, Yang-Hyun; Lee, Kyung-Soon; Kim, Jeong-Ki; Lee, Il-Han; Yang, Jai-Myung; Sung, Moon-Hee; Park, Jong-Sup; Poo, Haryoung

    2010-11-01

    Given that local cell-mediated immunity (CMI) against the human papillomavirus type 16 E6 (HPV16 E6) protein is important for eradication of HPV16 E6-expressing cancer cells in the cervical mucosa, the HPV16 E6 protein may be a target for the mucosal immunotherapy of cervical cancer. Here, we expressed the HPV16 E6 antigen on Lactobacillus casei (L. casei) and investigated E6-specific CMI following oral administration of the L. casei-PgsA-E6 to mice. Surface expression of HPV16 E6 antigens was confirmed and mice were orally inoculated with the L. casei-PgsA or the L. casei-PgsA-E6. Compared to the L. casei-PgsA-treated mice, significantly higher levels of serum IgG and mucosal IgA were observed in L. casei-PgsA-E6-immunized mice; these differences were significantly enhanced after boost. Consistent with this, systemic and local CMI were significantly increased after the boost, as shown by increased counts of IFN-gamma-secreting cells in splenocytes, mesenteric lymph nodes (MLN), and vaginal samples. Furthermore, in the TC-1 tumor model, animals receiving the orally administered L. casei-PgsA-E6 showed reduced tumor size and increased survival rate versus mice receiving control (L. casei-PgsA) immunization. We also found that L. casei-PgsA-E6-induced antitumor effect was decreased by in vivo depletion of CD4(+) or CD8(+) T cells. Collectively, these results indicate that the oral administration of lactobacilli bearing the surface-displayed E6 protein induces T cell-mediated cellular immunity and antitumor effects in mice.

  19. IPv6 Network Administration

    CERN Document Server

    Murphy, Niall Richard

    2009-01-01

    This essential guide explains what works, what doesn't, and most of all, what's practical about IPv6--the next-generation Internet standard. A must-have for network administrators everywhere looking to fix their network's scalability and management problems. Also covers other IPv6 benefits, such as routing, integrated auto-configuration, quality-of-services (QoS), enhanced mobility, and end-to-end security.

  20. Mol 7C/6

    International Nuclear Information System (INIS)

    Aberle, J.; Schleisiek, K.; Schmuck, I.; Schmidt, L.; Romer, O.; Weih, G.

    1995-01-01

    The Mol 7C/6 coolant blockage experiment in the Belgian BR2 reactor yielded results different from Mol 7C experiments with low burnup pins: At 10% burnup local failure is not self-limiting, but requires active systems for detection and scram. The Mol 7C series was finished in 1991. In each of the test bundles Mol 7C/4, /5 and /6, 30 Mk I pins pre-irradiated in KNK II were used. The central blockage consisted of enriched UO 2 covering 30 percent of the bundle cross-section, with a height of 40 mm. The most important system for timely detection of coolant blockages of the type studied in Mol 7C/6 is based on DND. (orig.)

  1. Slide 6

    Indian Academy of Sciences (India)

    We have established production capabilities for 4 launch vehicles per year with 4 months of launch preparation period. With the LVM3 having to make 2 launches per year, out launch frequency can become 6 launches per year. The RLV's goal is to achieve substantially large number of launches per year as new uses ...

  2. Size effect of added LaB6 particles on optical properties of LaB6/Polymer composites

    International Nuclear Information System (INIS)

    Yuan Yifei; Zhang Lin; Hu Lijie; Wang Wei; Min Guanghui

    2011-01-01

    Modified LaB 6 particles with sizes ranging from 50 nm to 400 nm were added into polymethyl methacrylate (PMMA) matrix in order to investigate the effect of added LaB 6 particles on optical properties of LaB 6 /PMMA composites. Method of in-situ polymerization was applied to prepare PMMA from raw material—methyl methacrylate (MMA), a process during which LaB 6 particles were dispersed in MMA. Ultraviolet–visible–near infrared (UV–vis–NIR) absorption spectrum was used to study optical properties of the as-prepared materials. The difference in particle size could apparently affect the composites' absorption of visible light around wavelength of 600 nm. Added LaB 6 particles with size of about 70 nm resulted in the best optical properties among these groups of composites. - Graphical abstract: 70 nm LaB 6 particles resulted in the best performance on absorption of VIS and NIR, which could not be apparently achieved by LaB 6 particles beyond nano-scale. Highlights: ► LaB 6 /PMMA composites were prepared using the method of in-situ polymerization. ► LaB 6 particles added in MMA prolonged the time needed for its pre-polymerization. ► Nanosized LaB 6 particles could obviously absorb much NIR but little VIS.

  3. The optical potential for 6Li-6Li elastic scattering at 156 MeV

    International Nuclear Information System (INIS)

    Micek, S.; Majka, Z.; Klewe-Nebenius, H.; Rebel, H.; Gils, H.J.

    1984-10-01

    Elastic scattering of 6 Li from 6 Li has been studied for the beam energy of 156 MeV. The experimental differential cross section has been analysed on the basis of the optical model using various phenomenological forms. The spin-orbit interaction proves to be less significant. A semi-microscopic double-folding cluster model which generates the real part of the optical potential by an antisymmetrized d-α cluster wave function of 6 Li and α-α, d-d and d-α interactions is well able to describe the experimental data. (orig.) [de

  4. 12 CFR 703.6 - Credit analysis.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Credit analysis. 703.6 Section 703.6 Banks and... ACTIVITIES § 703.6 Credit analysis. A Federal credit union must conduct and document a credit analysis on an... Federal Deposit Insurance Corporation. A Federal credit union must update this analysis at least annually...

  5. 46 CFR 160.037-6 - Container.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Container. 160.037-6 Section 160.037-6 Shipping COAST...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hand Orange Smoke Distress Signals § 160.037-6 Container. (a) General. The container for storing the signals on lifeboats and liferafts is not required to be of a...

  6. Explosive destruction of "2"6Al

    International Nuclear Information System (INIS)

    Kahl, D.; Yamaguchi, H.; Shimizu, H.

    2016-01-01

    The γ-ray emission associated with the radioactive decay of "2"6Al is one of the key pieces of observational evidence indicating stellar nucleosynthesis is an ongoing process in our Galaxy, and it was the first such radioactivity to be detected. Despite numerous efforts in stellar modeling, observation, nuclear theory, and nuclear experiment over the past four decades, the precise sites and origin of Galactic "2"6Al remain elusive. We explore the present experimental knowledge concerning the destruction of "2"6Al in massive stars. The precise stellar rates of neutron-induced reactions on "2"6Al, such as (n,p) and (n,α), have among the largest impacts on the total "2"6Al yield. Meanwhile, reactions involving the short-lived isomeric state of "2"6Al such as radiative proton capture are highly-uncertain at present. Although we presented on-going experimental work from n TOF at CERN with an "2"6Al target, the present proceeding focuses only on the "2"6Al isomeric radioactive beam production aspect and the first experimental results at CRIB.

  7. CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (UNIX VERSION)

    Science.gov (United States)

    Donnell, B.

    1994-01-01

    CLIPS, the C Language Integrated Production System, is a complete environment for developing expert systems -- programs which are specifically intended to model human expertise or knowledge. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. CLIPS 6.0 provides a cohesive tool for handling a wide variety of knowledge with support for three different programming paradigms: rule-based, object-oriented, and procedural. Rule-based programming allows knowledge to be represented as heuristics, or "rules-of-thumb" which specify a set of actions to be performed for a given situation. Object-oriented programming allows complex systems to be modeled as modular components (which can be easily reused to model other systems or create new components). The procedural programming capabilities provided by CLIPS 6.0 allow CLIPS to represent knowledge in ways similar to those allowed in languages such as C, Pascal, Ada, and LISP. Using CLIPS 6.0, one can develop expert system software using only rule-based programming, only object-oriented programming, only procedural programming, or combinations of the three. CLIPS provides extensive features to support the rule-based programming paradigm including seven conflict resolution strategies, dynamic rule priorities, and truth maintenance. CLIPS 6.0 supports more complex nesting of conditional elements in the if portion of a rule ("and", "or", and "not" conditional elements can be placed within a "not" conditional element). In addition, there is no longer a limitation on the number of multifield slots that a deftemplate can contain. The CLIPS Object-Oriented Language (COOL) provides object-oriented programming capabilities. Features supported by COOL include classes with multiple inheritance, abstraction, encapsulation, polymorphism, dynamic binding, and message passing with message-handlers. CLIPS 6.0 supports tight integration of the rule-based programming features of CLIPS with

  8. CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (MACINTOSH VERSION)

    Science.gov (United States)

    Riley, G.

    1994-01-01

    CLIPS, the C Language Integrated Production System, is a complete environment for developing expert systems -- programs which are specifically intended to model human expertise or knowledge. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. CLIPS 6.0 provides a cohesive tool for handling a wide variety of knowledge with support for three different programming paradigms: rule-based, object-oriented, and procedural. Rule-based programming allows knowledge to be represented as heuristics, or "rules-of-thumb" which specify a set of actions to be performed for a given situation. Object-oriented programming allows complex systems to be modeled as modular components (which can be easily reused to model other systems or create new components). The procedural programming capabilities provided by CLIPS 6.0 allow CLIPS to represent knowledge in ways similar to those allowed in languages such as C, Pascal, Ada, and LISP. Using CLIPS 6.0, one can develop expert system software using only rule-based programming, only object-oriented programming, only procedural programming, or combinations of the three. CLIPS provides extensive features to support the rule-based programming paradigm including seven conflict resolution strategies, dynamic rule priorities, and truth maintenance. CLIPS 6.0 supports more complex nesting of conditional elements in the if portion of a rule ("and", "or", and "not" conditional elements can be placed within a "not" conditional element). In addition, there is no longer a limitation on the number of multifield slots that a deftemplate can contain. The CLIPS Object-Oriented Language (COOL) provides object-oriented programming capabilities. Features supported by COOL include classes with multiple inheritance, abstraction, encapsulation, polymorphism, dynamic binding, and message passing with message-handlers. CLIPS 6.0 supports tight integration of the rule-based programming features of CLIPS with

  9. Interaction Between New Anti-cancer Drug Syndros and CNT(6,6-6) Nanotube for Medical Applications: Geometry Optimization, Molecular Structure, Spectroscopic (NMR, UV/Vis, Excited state), FMO, MEP and HOMO-LUMO Investigation

    Science.gov (United States)

    Sheikhi, Masoome; Shahab, Siyamak; Khaleghian, Mehrnoosh; Kumar, Rakesh

    2018-03-01

    In the present work, Density Functional Theory (DFT) was first time employed to investigate the interaction between new drug (6aR,10aR)-6,6,9-trimethyl-3-pentyl-6a,7,8,10a-tetrahydrobenzo[c]chromen-1-ol (Syndros) and the CNT(6,6-6) Nanotube in the gaseous phase. The interaction effects of compounds Syndros and CNT (6,6-6) nanotube on the electronic properties, chemical shift tensors and natural charge was also determined and discussed. The electronic spectra of the Syndros and the complex CNT(6,6-6)/Syndros in the gas phase were calculated by Time Dependent Density Functional Theory (TD-DFT) for the formation of adsorption effect on maximum wavelength of the Syndros. Nucleus-Independent Chemical Shifts (NICS) calculations have also been carried out for the compound Syndors and the complex CNT(6,6-6)/Syndros and the aromaticity of the compound Syndors before and after interaction with the CNT(6,6-6) Nanotube was investigated.

  10. Characteristics of TGM6

    International Nuclear Information System (INIS)

    Turner, T.S.; Teehan, D.

    1992-02-01

    Over the past 2 years several periods of commissioning time have been granted in order to characterise the performance of the Toroidal Grating Monochromator on station 6.2 of beam line 6 of the Synchrotron Radiation Source (SRS). The purpose of this technical memorandum is to report the results within one document that can be used as a reference by in-house staff and users alike. (author)

  11. 46 CFR 160.036-6 - Container.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Container. 160.036-6 Section 160.036-6 Shipping COAST... § 160.036-6 Container. (a) General. The container for storing the signals on lifeboats and liferafts is not required to be of a special design or be approved by the Coast Guard. The container must meet the...

  12. Prevalence of glucose-6-phosphate dehydrogenase (G6PD) deficiency among malaria patients in Upper Myanmar.

    Science.gov (United States)

    Lee, Jinyoung; Kim, Tae Im; Kang, Jung-Mi; Jun, Hojong; Lê, Hương Giang; Thái, Thị Lam; Sohn, Woon-Mok; Myint, Moe Kyaw; Lin, Khin; Kim, Tong-Soo; Na, Byoung-Kuk

    2018-03-16

    Glucose-6-phosphate dehydrogenase (G6PD; EC 1.1.1.49) deficiency is one of the most common X-linked recessive hereditary disorders in the world. Primaquine (PQ) has been used for radical cure of P. vivax to prevent relapse. Recently, it is also used to reduce P. falciparum gametocyte carriage to block transmission. However, PQ metabolites oxidize hemoglobin and generate excessive reactive oxygen species which can trigger acute hemolytic anemia in malaria patients with inherited G6PD deficiency. A total of 252 blood samples collected from malaria patients in Myanmar were used in this study. G6PD variant was analysed by a multiplex allele specific PCR kit, DiaPlexC™ G6PD Genotyping Kit [Asian type]. The accuracy of the multiplex allele specific PCR was confirmed by sequencing analysis. Prevalence and distribution of G6PD variants in 252 malaria patients in Myanmar were analysed. Six different types of G6PD allelic variants were identified in 50 (7 females and 43 males) malaria patients. The predominant variant was Mahidol (68%, 34/50), of which 91.2% (31/34) and 8.8% (3/34) were males and females, respectively. Other G6PD variants including Kaiping (18%, 9/50), Viangchan (6%, 3/50), Mediterranean (4%, 2/50), Union (2%, 1/50) and Canton (2%, 1/50) were also observed. Results of this study suggest that more concern for proper and safe use of PQ as a radical cure of malaria in Myanmar is needed by combining G6PD deficiency test before PQ prescription. Establishment of a follow-up system to monitor potential PQ toxicity in malaria patients who are given PQ is also required.

  13. G-factor for the K-6, Jsup(π) = 6+ isomer in 178Hf

    International Nuclear Information System (INIS)

    Faestermann, T.; Haeusser, O.; Ward, D.; Andrews, H.R.; Alexander, T.K.; Horn, D.

    1978-01-01

    High-K isomers are prevalent towards the end of the rare-earth region of deformed nuclei where the valence particles fill high Ω orbitals. Very little is known about the g-factors for these isomers mainly because in the half-life range encountered, 50 ns-50 μs, quadrupole and paramagnetic relaxation effects can destroy the nuclear alignment very rapidly. In 178 Hf a Isub(π)K=6 + 6 isomer with a half-life of 78 ns has recently been found. It decays predominantly to the ground band (K=O) 6 + and 4 + levels with gamma rays of 921.8 keV and 1247.3 keV respectively. The authors have measured the g-factor of this isomer with the method of perturbed angular distributions. (Auth.)

  14. A comparison of the neuroprotective efficacy of individual oxime (HI-6) and combinations of oximes (HI-6+trimedoxime, HI-6+K203) in soman-poisoned rats.

    Science.gov (United States)

    Kassa, Jiri; Karasova, Jana Zdarova; Tesarova, Sandra

    2011-07-01

    The ability of two combinations of oximes (HI-6+trimedoxime, HI-6+K203) to reduce soman-induced acute neurotoxic signs and symptoms was compared with the neuroprotective efficacy of the oxime HI-6 alone, using a functional observational battery. Soman-induced neurotoxicity and the neuroprotective effects of HI-6 alone and HI-6 combined with trimedoxime or K203 in rats poisoned with soman at a sublethal dose (90 μg/kg intramuscularly, i.m.; 80% of LD₅₀ value) were monitored by the functional observational battery at 24 hours following soman administration. The results indicate that both tested oxime mixtures combined with atropine were able to allow soman-poisoned rats to survive 24 hours following soman challenge, while 4 nontreated soman-poisoned rats and 1 soman-poisoned rat treated with oxime HI-6 alone combined with atropine died within 24 hours following soman poisoning. While the oxime HI-6 alone combined with atropine treatment was able to eliminate a few soman-induced neurotoxic signs and symptoms, both oxime mixtures showed higher neuroprotective efficacy in soman-poisoned rats. Especially, the combination of HI-6 with trimedoxime was able to eliminate most soman-induced neurotoxic signs and symptoms and markedly reduce acute neurotoxicity of soman in rats. Thus, both tested mixtures of oximes combined with atropine were able to increase the neuroprotective effectiveness of antidotal treatment of acute soman poisonings, compared to the individual oxime.

  15. E6AP is Required for Human Papillomavirus type 16 E6 to Cause Cervical Cancer in Mice

    Science.gov (United States)

    Shai, Anny; Pitot, Henry C.; Lambert, Paul F.

    2010-01-01

    High-risk human papillomaviruses cause certain anogenital and head and neck cancers. E6, one of three potent HPV oncogenes that contribute to the development of these malignancies, is a multifunctional protein with many biochemical activities. Among these activities are its ability to bind and inactivate the cellular tumor suppressor p53, induce expression of telomerase, and bind to various other proteins including Bak, E6BP1, E6TP1, and proteins that contain PDZ domains such as hScrib and hDlg. Many of these activities are thought to contribute to E6’s role in carcinogenesis. E6’s interaction with many of these cellular proteins, including p53, leads to their destabilization. This property is mediated at least in part through E6’s ability to recruit the ubiquitin ligase, E6AP into complexes with these cellular proteins resulting in their ubiquitin–mediated degradation by the proteasome. In this study, we address the requirement for E6AP in mediating E6's acute and oncogenic phenotypes, including induction of epithelial hyperplasia, abrogation of DNA damage response and induction of cervical cancer. Loss of E6AP had no discernable effect on E6's ability to induce hyperplasia or abrogate DNA damage responses, akin to what we had earlier observed in the mouse epidermis. Nevertheless, in cervical carcinogenesis studies, there was a complete loss of E6’s oncogenic potential in mice nulligenic for E6AP. Thus, E6AP is absolutely required for E6 to cause cervical cancer. PMID:20530688

  16. SB6.0: The 6th International meeting on Synthetic Biology, July 9-11, 2013

    Energy Technology Data Exchange (ETDEWEB)

    Kahl, Linda J. [BioBricks Foundation

    2015-04-23

    The Synthetic Biology conference series (SBx.0) is the preeminent academic meeting in synthetic biology. Organized by the BioBricks Foundation, the SBx.0 conference series brings together leading researchers, students, industry executives, and policy makers from around the world to share, consider, debate, and plan efforts to make biology easier to engineer. Historically held every two years, the SBx.0 conferences are held in alternating locations in the United States, Europe, and Asia to encourage global participation and collaboration so that the ramifications of synthetic biology research and development are most likely to be safe ethical, and beneficial. On 9-11 July 2013, the 6th installment of the synthetic biology conference series (SB6.0) was held on the campus of Imperial College London (http://sb6.biobricks.org). The SB6.0 conference was attended by over 700 people, and many more were able to participate via video digital conference (http://sb6.biobricks.org/digital-conference/). Over the course of three days, the SB6.0 conference agenda included plenary sessions, workshops, and poster presentations covering topics ranging from the infrastructure needs arising when “Systematic Engineering Meets Biological Complexity” and design-led considerations for “Connecting People and Technologies” to discussions on “Engineering Biology for New Materials,” “Assessing Risk and Managing Biocontainment,” and “New Directions for Energy and Sustainability.” The $10,150 grant awarded by the U.S. Department of Energy (DE-SC0010233) to the BioBricks Foundation was used to provide partial reimbursement for the travel expenses of leading researchers from the United States to speak at the SB6.0 conference. A total of $9,450 was used to reimburse U.S. speakers for actual expenses related to the SB6.0 conference, including airfare (economy or coach only), ground transportation, hotel, and registration fees. In addition, $700 of the grant was used to offset

  17. Neocortical layer 6, a review

    Directory of Open Access Journals (Sweden)

    Alex M Thomson

    2010-03-01

    Full Text Available This review attempts to summarise some of the major areas of neocortical research as it pertains to layer 6. After a brief summary of the development of this intriguing layer, the major pyramidal cell classes to be found in layer 6 are described and compared. The connections made and received by these different classes of neurones are then discussed and the possible functions of these connections, with particular reference to the shaping of responses in visual cortex and thalamus. Inhibition in layer 6 is discussed where appropriate, but not in great detail. Many types of interneurones are to be found in each cortical layer and layer 6 is no exception, but the functions of each type remain to be elucidated.

  18. EC6 safety design improvements

    Energy Technology Data Exchange (ETDEWEB)

    Yu, S.; Lee, A.G.; Soulard, M. [Candu Energy Inc., Mississauga, ON (Canada)

    2014-07-01

    The Enhanced CANDU 6 (EC6) builds on the proven high performance design such as the Qinshan CANDU 6 reactor, and has made improvements to safety, operational performance, and has incorporated extensive operational feedback. Completion of all three phases of the pre-licensing design review by the Canadian Regulator - the Canadian Nuclear Safety Commission has provided a higher level of assurance that the EC6 reference design has taken modern regulatory requirements and expectations into account and further confirmed that there are no fundamental barriers to licensing the EC6 design in Canada. The EC6 design is based on the defence-in-depth principles in INSAG-10 and provides further safety features that address the lessons learned from Fukushima. With these safety features, the EC6 design has strengthened accident prevention as the first priority in the defence-in-depth strategy, as outlined in INSAG-10. As well, the EC6 design has incorporated further mitigation measures to provide additional protection of the public and the environment if the preventive measures fail. The EC6 design has an appropriate combination of inherent, passive safety characteristics, engineered features and administrative safety measures to effectively prevent and mitigate severe accident progressions. A strong contributor to the robustness and redundancy of CANDU design is the two-group separation philosophy. This ensures a high degree of independence between safety systems as well as physical separation and functional independence in how fundamental safety functions are provided. This paper will describe the following safety features based on the application of defence-in-depth and design approach to prevent beyond design basis events progressing to severe accidents and to mitigate the consequences if it occurs: Improved steam generator heat sink via a more reliable emergency heat removal system; Increased time before manual field actions are required via enhanced capacity of

  19. Repeated sharp flux dropouts observed at 6.6 R/subE/ during a geomagnetic storm

    International Nuclear Information System (INIS)

    Su, S.; Fritz, T.A.; Konradi, A.

    1976-01-01

    A number of repeated rapid flux dropouts have been observed at 6.6 R/subE/ by the NOAA low-energy proton detectors on board the ATS 6 satellite during the July 4--6, 1974, geomagnetic storm period. These rapid flux changes are caused by the fact that the outer boundary of the trapped radiation region moves back and forth past the satellite. Although a tilting field line configuration can cause the boundary to pass the satellite, as has frequently been reported in the literature, the boundary is shown to be distorted by a large surface wave traveling eastward around the earth. The maximum velocity of the wave was observed to be approx. =40 km/s

  20. Corrosion surveillance of the chemical decontamination process in Kuosheng nuclear power plant

    International Nuclear Information System (INIS)

    Wang, L.H.

    2002-01-01

    The Piping Recirculation System (RRS) and reactor water clean-up system (RWCU) of Kuosheng Nuclear Power Plant of Taiwan Power Company were decontaminated by CORD process of Framatome ANP GmbH during the outage at October 2001. This is the first time that CORD process was adopted and applied in Taiwan Nuclear Power Plant. To verify minor corrosion damage and correct process control, the material corrosion condition was monitored during all the stages of the chemical decontamination work. Three kinds of specimen were adopted in this corrosion monitoring, including corrosion coupons for weight loss measurements, electrochemical specimens for on-line corrosion monitoring, and WOL specimens (wedge opening loaded) for stress corrosion evaluation. The measured metal losses from nine coupon materials did not reveal any unexpected or intolerable high corrosion damage from the CORD UV or CORD CS processes. The coupon materials included type 304 stainless steel (SS) with sensitized and as-received thermal history, type 308 weld filler, type CF8 cast SS, nickel base alloy 182 weld filler, Inconel 600, Stellite 6 hard facing alloy, NOREM low cobalt hard facing alloy, and A106B carbon steel (CS). The electrochemical noise (ECN) measurements from three-electrode electrochemical probe precisely depicted the metal corrosion variation with the decontamination process change. Most interestingly, the estimated trend of accumulated metal loss is perfectly corresponding to the total removed activities. The ECN measurements were also used for examining the effect of different SS oxide films pre-formed in NWC and HWC on the decontamination efficiency, and for evaluating the galvanic effect of CS with SS. The existing cracks did not propagate further during the decontamination. The average decontamination factors achieved were 50.8 and 4.2 respectively for RRS and RWCU. (authors)

  1. Elevated levels of homocysteine increase IL-6 production in monocytic Mono Mac 6 cells

    NARCIS (Netherlands)

    van Aken, B. E.; Jansen, J.; van Deventer, S. J.; Reitsma, P. H.

    2000-01-01

    Hyperhomocysteinemia is a risk factor for atherosclerosis and thrombosis. The aim of this study was to analyze if exposure of monocytic cells to increased levels of homocysteine (HCY) induces the accumulation of inflammatory mediators. Interleukin (IL)-6 production by monocytic cell line Mono Mac 6

  2. Pharmacokinetic and toxicological evaluation of multi-functional thiol-6-fluoro-6-deoxy-d-glucose gold nanoparticles in vivo

    Science.gov (United States)

    Roa, Wilson; Xiong, Yeping; Chen, Jie; Yang, Xiaoyan; Song, Kun; Yang, Xiaohong; Kong, Beihua; Wilson, John; Xing, James Z.

    2012-09-01

    We synthesized a novel, multi-functional, radiosensitizing agent by covalently linking 6-fluoro-6-deoxy-d-glucose (6-FDG) to gold nanoparticles (6-FDG-GNPs) via a thiol functional group. We then assessed the bio-distribution and pharmacokinetic properties of 6-FDG-GNPs in vivo using a murine model. At 2 h, following intravenous injection of 6-FDG-GNPs into the murine model, approximately 30% of the 6-FDG-GNPs were distributed to three major organs: the liver, the spleen and the kidney. PEGylation of the 6-FDG-GNPs was found to significantly improve the bio-distribution of 6-FDG-GNPs by avoiding unintentional uptake into these organs, while simultaneously doubling the cellular uptake of GNPs in implanted breast MCF-7 adenocarcinoma. When combined with radiation, PEG-6-FDG-GNPs were found to increase the apoptosis of the MCF-7 breast adenocarinoma cells by radiation both in vitro and in vivo. Pharmacokinetic data indicate that GNPs reach their maximal concentrations at a time window of two to four hours post-injection, during which optimal radiation efficiency can be achieved. PEG-6-FDG-GNPs are thus novel nanoparticles that preferentially accumulate in targeted cancer cells where they act as potent radiosensitizing agents. Future research will aim to substitute the 18F atom into the 6-FDG molecule so that the PEG-6-FDG-GNPs can also function as radiotracers for use in positron emission tomography scanning to aid cancer diagnosis and image guided radiation therapy planning.

  3. G6PD Deficiency (Glucose-6-Phosphate Dehydrogenase) (For Parents)

    Science.gov (United States)

    ... genes from one or both parents to a child. The gene responsible for this deficiency is on the X chromosome. G6PD deficiency is most common in males of African heritage. Many females of African heritage are carriers ...

  4. 15 CFR 742.6 - Regional stability.

    Science.gov (United States)

    2010-01-01

    ... consumer-ready civil products controlled by 6A003.b.4.b when incorporating “focal plane arrays” that have... plane arrays), and .c or .e, 6A003.b.3 and b.4, or 6A008.j.1); 6E002 (only “technology” for “production... require a license to all destinations other than Canada if such cameras incorporate a focal plane array...

  5. Glucose 6 phosphatase dehydrogenase (G6PD) and neurodegenerative disorders: Mapping diagnostic and therapeutic opportunities

    OpenAIRE

    Manju Tiwari

    2017-01-01

    Glucose 6 phosphate dehydrogenase (G6PD) is a key and rate limiting enzyme in the pentose phosphate pathway (PPP). The physiological significance of enzyme is providing reduced energy to specific cells like erythrocyte by maintaining co-enzyme nicotinamide adenine dinucleotide phosphate (NADPH). There are preponderance research findings that demonstrate the enzyme (G6PD) role in the energy balance, and it is associated with blood-related diseases and disorders, primarily the anemia resulted f...

  6. Evaluation of inflammatory markers interleukin-6 (IL-6) and matrix metalloproteinase-9 (MMP-9) in asthma.

    Science.gov (United States)

    Naik, Srilata Puru; P A, Mahesh; B S, Jayaraj; Madhunapantula, SubbaRao V; Jahromi, Sarah Raeiszadeh; Yadav, Manish Kumar

    2017-08-01

    Even though IL-6 and MMP-9 are associated with airway inflammation in asthma, there is paucity of data in Indian population. To determine the levels of IL-6 and MMP-9 in the serum of patients suffering from asthma, and correlate with (a) disease severity, as per GINA guidelines; (b) clinical phenotypes; and (c) response to treatment. The levels of IL-6 and MMP-9 were compared between moderate persistent asthma (n = 25), severe persistent asthma (n = 25) and normal controls (n = 30). IL-6 and MMP-9 were measured by ELISA (R&D Systems Inc., USA and Canada) and compared between controls and asthmatics and between groups of different asthma severity, clinical variables, spirometry, and allergen sensitization. Spirometry was repeated after 2 months of ICS+LABA to assess response to treatment in relation to baseline IL-6 and MMP-9 levels. We observed a significant difference in both IL-6 and MMP-9 levels among asthmatics versus controls (p asthma (p asthma duration, total IgE, AEC, number of allergens sensitized and degree of sensitization. No significant correlation (p > 0.5) was observed with IL-6 and MMP-9 levels and FEV 1 improvement after 2 months of ICS+LABA. Higher levels of IL-6 and MMP-9 were observed in asthmatics as compared to controls and in severe persistent asthma as compared to moderate persistent asthma, higher levels of MMP-9 was associated with lower lung functions.

  7. Reproductive responses of male Brandt's voles (Lasiopodomys brandtii) to 6-methoxybenzoxazolinone (6-MBOA) under short photoperiod.

    Science.gov (United States)

    Dai, Xin; Jiang, Lian Yu; Han, Mei; Ye, Man Hong; Wang, Ai Qin; Wei, Wan Hong; Yang, Sheng Mei

    2016-04-01

    The plant secondary metabolite 6-methoxybenzoxazolinone (6-MBOA) can stimulate and enhance animal reproduction. This compound has been successfully detected in Leymus chinensis, which is the main diet of Brandt's voles. The aim of this study was to investigate the effect of different 6-MBOA doses on the reproductive physiology of male Brandt's voles under a short photoperiod. The results showed that 6-MBOA administration increased relative testis weight, regardless of the dose, but it had little effect on the body mass. Low and middle doses of 6-MBOA increased the concentrations of luteinizing hormone and testosterone in the serum and the mRNA levels of StAR and CYP11a1 in the testes. However, 6-MBOA did not cause any significant increase in the mRNA levels of KiSS-1, GPR54, and GnRH compared to those in the control group. The mRNA level of KiSS-1 in the arcuate nucleus (ARC) was higher than that in the anteroventral periventricular nucleus (AVPV). Collectively, our results demonstrated that the number of KiSS-1-expressing neurons located in the ARC was the highest, and that 6-MBOA, which might modulate the reproductive activity along the hypothalamic-pituitary-gonadal axis, had a dose-dependent stimulatory effect on the reproductive activity of Brandt's voles under a short photoperiod. Our study provided insights into the mechanism of 6-MBOA action and the factors influencing the onset of reproduction in Brandt's voles.

  8. Physicochemical investigation of Bi2MoO6 solid-phase interaction with Sm2MoO6

    International Nuclear Information System (INIS)

    Khajkina, E.G.; Kovba, L.M.; Bazarova, Zh.G.; Khal'baeva, K.M.; Khakhinov, V.V.; Mokhosoev, M.V.

    1986-01-01

    Bi 2 MoO 6 -Sm 2 MoO 6 interaction in the temperature range of 700-1000 deg C is studied using X-ray phase analysis and vibrational spectroscopy. Formation of monoclinic solid solutions based on γ'-Bi 2 MoO 6 and B 2-x Sm x MoO 6 varied composition phase with α-Ln 2 MoO 6 structure which homogeneity region extent at 1000 deg C constitutes ∼ 50 mol % (0.7≤x≤1.7) is stated. Crystallographic characteristics of the synthesized phases are determined

  9. Two structure types based on Si6O15 rings: synthesis and structural and spectroscopic characterisation of Cs1.86K1.14DySi6O15 and Cs1.6K1.4SmSi6O15

    International Nuclear Information System (INIS)

    Wierzbicka-Wieczorek, Maria; Goeckeritz, Martin; Kolitsch, Uwe; Lenz, Christoph; Giester, Gerald

    2015-01-01

    The silicate Cs 1.86 K 1.14 DySi 6 O 15 represents a mixed tetrahedral-octahedral framework structure type based on roughly circular Si 6 O 15 rings and isolated DyO 6 octahedra. The silicate Cs 1.6 K 1.4 SmSi 6 O 15 has a layered atomic arrangement built from corrugated Si 6 O 15 layers containing four-, six- and eight-membered rings. The layers are connected by isolated SmO 6 octahedra to form a mixed tetrahedral-octahedral framework. This structure shows a close structural relationship to β-K 3 NdSi 6 O 15 and a less close one to dehydrated elpidite (Na 2 ZrSi 6 O 15 ). In both structures, Cs/K atoms occupy large voids. The silicates were obtained through high-temperature flux syntheses. Their crystal structures have been determined from single-crystal X-ray diffraction data. Cs 1.86 K 1.14 DySi 6 O 15 crystallises in R32 (no. 155) with a = 13.896(2), c = 35.623(7) Aa and V = 5957.2(17) Aa 3 , whereas Cs 1.6 K 1.4 SmSi 6 O 15 crystallises in Cmca (no. 64) with a = 14.474(3), b = 14.718(3), c = 15.231(3) Aa and V = 3244.7(11) Aa 3 . The Dy 3+ and Sm 3+ cations present in the silicates cause PL emission bands in the visible yellow-to-orange spectral range. (Copyright copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  10. Hawaii 6 arc-second DEM

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The 6-second Hawaii Elevation Grid provides bathymetric data in ASCII raster format of 6-second resolution in geographic coordinates. This grid is strictly for...

  11. IPv6 geolokace a vizualizace

    OpenAIRE

    Suchomel, Tomáš

    2011-01-01

    Tato diplomová práce se zabývá problematikou geolokace IPv6 adres a vizualizace jejich lokalit. Má za úkol prozkoumat oblast IPv6, dále porovnává současné přístupy ke geolokaci. Jejím hlavním cílem je vybudovat systém, který dokáže vytvořit geolokační databázi s pravidelnou aktualizací a který bude schopen zobrazit geografickou lokalitu IPv6 adresy na světové mapě. Geolokační systém nejprve získá geografické adresy pro jednotlivé prefixy IPv6 z veřejně přístupného systému Whois. Tyto adresy t...

  12. 6 Sigma project advance

    International Nuclear Information System (INIS)

    2002-12-01

    This book deals with 6 sigma project advance which introduces 6 sigma project in Changwon special steel, how is failure accepted? CTQ selection which is starting line, definition of performance standard, measurement system check on reliability of measurement data, check of process capacity for current level, establishment of target, optimal design and performance of application, practice of management system for maintain of improved result, CTQ selection, check of measurement system and practice of management system.

  13. Synthesis of the Novel 4,4’- and 6,6’- Dihydroxamic - 2,2’-Bipyridines and Improved Routes to 4,4’- and 6,6’- Substituted 2,2’-Bipyridines and Mono-N-Oxide-2,2’-Bipyridine

    OpenAIRE

    Donnici,Claudio Luis; Máximo Filho,Daniel Henrique; Moreira,Leda Lúcia Cruz; Reis,Genuína Teixeira dos; Cordeiro,Estefania Santos; Oliveira,Ione Ma. Ferreira de; Carvalho,Sandra; Paniago,Eucler B.

    1998-01-01

    The preparation of key precursors for many 2,2’-bipyridine derivatives such as 4,4’-dicarboxy- 2,2’-bipyridine (I), 6,6’-dicarboxy-2,2’-bipyridine- acid (II), 4,4’-dinitro-2,2’-bipyridine-N,N-dioxide (III), 6,6’-dicarbothioamide-2,2’-bipyridine (IV) and mono-N-oxide-2,2’-bipyridine (VII) through more efficient methods is described. The syntheses of the novel ligands 4,4’-dihydroxamic-2,2’-bipyridine (V) and 6,6’-dihydroxamic-2,2’-bipyridine (VI) are also reported. Neste trabalho relatamos ...

  14. Structure and phase transitions of the 6,6-cyclopropane isomer of C61H2

    International Nuclear Information System (INIS)

    Stetzer, M.R.; Heiney, P.A.; Stephens, P.W.; Dinnebier, R.E.; Zhu, Q.; McGhie, A.R.; Strongin, R.M.; Brandt, B.M.; Smith, A.B. III

    2000-01-01

    We have used x-ray powder diffraction and differential scanning calorimetry to study the crystalline structures and thermal behavior of the 6,6-cyclopropane isomer of C 61 H 2 . At room temperature, the C 61 H 2 cyclopropane molecules, like those of the 6,5-annulene isomer and C 60 O epoxide, are orientationally disordered and crystallize on a face-centered-cubic lattice such that their methylene groups are statistically disordered among the octahedral voids. Unlike 6,5-C 61 H 2 and C 60 O, the low-temperature structure is not Pa3-bar, but rather a low-symmetry orthorhombic lattice in which a≅b< c. The orientational melting takes place via a two-step transition centered around 198-213 K

  15. TRPC6 enhances angiotensin II-induced albuminuria.

    LENUS (Irish Health Repository)

    Eckel, Jason

    2011-03-01

    Mutations in the canonical transient receptor potential cation channel 6 (TRPC6) are responsible for familial forms of adult onset focal segmental glomerulosclerosis (FSGS). The mechanisms by which TRPC6 mutations cause kidney disease are not well understood. We used TRPC6-deficient mice to examine the function of TRPC6 in the kidney. We found that adult TRPC6-deficient mice had BP and albumin excretion rates similar to wild-type animals. Glomerular histomorphology revealed no abnormalities on both light and electron microscopy. To determine whether the absence of TRPC6 would alter susceptibility to hypertension and renal injury, we infused mice with angiotensin II continuously for 28 days. Although both groups developed similar levels of hypertension, TRPC6-deficient mice had significantly less albuminuria, especially during the early phase of the infusion; this suggested that TRPC6 adversely influences the glomerular filter. We used whole-cell patch-clamp recording to measure cell-membrane currents in primary cultures of podocytes from both wild-type and TRPC6-deficient mice. In podocytes from wild-type mice, angiotensin II and a direct activator of TRPC6 both augmented cell-membrane currents; TRPC6 deficiency abrogated these increases in current magnitude. Our findings suggest that TRPC6 promotes albuminuria, perhaps by promoting angiotensin II-dependent increases in Ca(2+), suggesting that TRPC6 blockade may be therapeutically beneficial in proteinuric kidney disease.

  16. IL-6 and mouse oocyte spindle.

    Directory of Open Access Journals (Sweden)

    Jashoman Banerjee

    Full Text Available Interleukin 6 (IL-6 is considered a major indicator of the acute-phase inflammatory response. Endometriosis and pelvic inflammation, diseases that manifest elevated levels of IL-6, are commonly associated with higher infertility. However, the mechanistic link between elevated levels of IL-6 and poor oocyte quality is still unclear. In this work, we explored the direct role of this cytokine as a possible mediator for impaired oocyte spindle and chromosomal structure, which is a critical hurdle in the management of infertility. Metaphase-II mouse oocytes were exposed to recombinant mouse IL-6 (50, 100 and 200 ng/mL for 30 minutes and subjected to indirect immunofluorescent staining to identify alterations in the microtubule and chromosomal alignment compared to untreated controls. The deterioration in microtubule and chromosomal alignment were evaluated utilizing both fluorescence and confocal microscopy, and were quantitated with a previously reported scoring system. Our results showed that IL-6 caused a dose-dependent deterioration in microtubule and chromosomal alignment in the treated oocytes as compared to the untreated group. Indeed, IL-6 at a concentration as low as 50 ng/mL caused deterioration in the spindle structure in 60% of the oocytes, which increased significantly (P<0.0001 as IL-6 concentration was increased. In conclusion, elevated levels of IL-6 associated with endometriosis and pelvic inflammation may reduce the fertilizing capacity of human oocyte through a mechanism that involves impairment of the microtubule and chromosomal structure.

  17. Thermophysical Properties of Solid and Liquid Ti-6Al-4V (TA6V) Alloy

    Science.gov (United States)

    Boivineau, M.; Cagran, C.; Doytier, D.; Eyraud, V.; Nadal, M.-H.; Wilthan, B.; Pottlacher, G.

    2006-03-01

    Ti-6Al-4V (TA6V) titanium alloy is widely used in industrial applications such as aeronautic and aerospace due to its good mechanical properties at high temperatures. Experiments on two different resistive pulse heating devices (CEA Valduc and TU-Graz) have been carried out in order to study thermophysical properties (such as electrical resistivity, volume expansion, heat of fusion, heat capacity, normal spectral emissivity, thermal diffusivity, and thermal conductivity) of both solid and liquid Ti-6Al-4V. Fast time-resolved measurements of current, voltage, and surface radiation and shadowgraphs of the volume have been undertaken. At TU-Graz, a fast laser polarimeter has been used for determining the emissivity of liquid Ti-6Al-4V at 684.5 nm and a differential scanning calorimeter (DSC) for measuring the heat capacity of solid Ti-6Al-4V. This study deals with the specific behavior of the different solid phase transitions (effect of heating rate) and the melting region, and emphasizes the liquid state ( T > 2000 K).

  18. Your Child's Development: 6 Months

    Science.gov (United States)

    ... Child's Development: 6 Months Print en español El desarrollo de su hijo: 6 meses Notice your baby ... both ways (back to front, front to back) Social and Emotional Development recognizes and responds happily to ...

  19. Thermolysis of salts of [ReCl6]2- and [ReBr6]2- anions

    International Nuclear Information System (INIS)

    Gubanov, A.I.; Korenev, S.V.; Gromilov, S.A.; Shubin, Yu.V.

    2003-01-01

    Thermal decomposition of the [Pd(NH 3 ) 4 ][ReG 6 ], [Pt(NH 3 ) 4 ][ReG 6 ], (NH 4 ) 2 [ReG 6 ] complexes, where G = Cl, Br, was studied in the inert atmosphere. Certain regularities of the thermolysis were established. Finished products of the thermolysis of binary complexes in the inert atmosphere were demonstrated to be two-phase systems containing two solid solutions - one on the basis of the platinum (palladium) fcc-lattice, another - on the basis of the rhenium hcp lattice. One-phase solid palladium - rhenium solutions were established to be obtained during reduction of the studied complexes in the hydrogen atmosphere [ru

  20. Analysis of accidental UF6 releases

    International Nuclear Information System (INIS)

    Fan Yumao; Tan Rui; Gao Qifa

    2012-01-01

    As interim substance in the nuclear fuel enrichment process, Uranium Hexafluoride (UF 6 ) is widely applied in nuclear processing, enrichment and fuel fabrication plants. Because of its vivid chemical characteristics and special radiological hazard and chemical toxicity, great attention must be paid to accident of UF 6 leakage. The chemical reactions involved in UF 6 release processes were introduced, therewith potential release styles, pathways and characteristics of diffusion were analyzed. The results indicated that the accidental release process of UF 6 is not a simple passive diffusion. So, specific atmospheric diffusion model related to UF 6 releases need be used in order to analyze and evaluate accurately the accidental consequences. (authors)

  1. Criticality calculations of the HTR-10 pebble-bed reactor with SCALE6/CSAS6 and MCNP5

    International Nuclear Information System (INIS)

    Wang, Meng-Jen; Sheu, Rong-Jiun; Peir, Jinn-Jer; Liang, Jenq-Horng

    2014-01-01

    Highlights: • Comparisons of the HTR-10 criticality calculations with SCALE6/CSAS6 and MCNP5 were performed. • The DOUBLEHET unit-cell treatment provides the best k eff estimation among PBR criticality calculations using SCALE6. • The continuous-energy SCALE6 calculations present a non-negligible discrepancy with MCNP5 in three PBR cases. - Abstract: HTR-10 is a 10 MWt prototype pebble-bed reactor (PBR) that presents a doubly heterogeneous geometry for neutronics calculations. An appropriate unit-cell treatment for the associated fuel elements is vital for creating problem-dependent multigroup cross sections. Considering four unit-cell options for resonance self-shielding correction in SCALE6, a series of HTR-10 core models were established using the CSAS6 sequence to systematically investigate how they affected the computational accuracy and efficiency of PBR criticality calculations. Three core configurations, which ranged from simplified infinite lattices to a detailed geometry, were examined. Based on the same ENDF/B-VII.0 cross-section library, multigroup results were evaluated by comparing with continuous-energy SCALE6/CSAS6 and MCNP5 calculations. The comparison indicated that the INFHOMMEDIUM results overestimated the effective multiplication factor (k eff ) by about 2800 pcm, whereas the LATTICECELL and MULTIREGION treatments overestimated k eff values with similar biases at approximately 470–680 pcm. The DOUBLEHET results attained further improvement, reducing the k eff overestimation to approximately 280 pcm. The comparison yielded two unexpected problems from using SCALE6/CSAS6 in HTR-10 criticality calculations. In particular, the continuous-energy CSAS6 calculations in this study present a non-negligible discrepancy with MCNP5, potentially causing a k eff value overestimate of approximately 680 pcm. Notably, using a cell-weighted mixture instead of an explicit model of individual TRISO particles in the pebble fuel zone does not shorten the

  2. Preferential inhibition of xanthine oxidase by 2-amino-6-hydroxy-8-mercaptopurine and 2-amino-6-purine thiol

    Directory of Open Access Journals (Sweden)

    Mukhopadhyay Anup

    2007-05-01

    Full Text Available Abstract Background The anticancer drug, 6-mercaptopurine (6MP is subjected to metabolic clearance through xanthine oxidase (XOD mediated hydroxylation, producing 6-thiouric acid (6TUA, which is excreted in urine. This reduces the effective amount of drug available for therapeutic efficacy. Co-administration of allopurinol, a suicide inhibitor of XOD, which blocks the hydroxylation of 6MP inadvertently enhances the 6MP blood level, counters this reduction. However, allopurinol also blocks the hydroxylation of hypoxanthine, xanthine (released from dead cancer cells leading to their accumulation in the body causing biochemical complications such as xanthine nephropathy. This necessitates the use of a preferential XOD inhibitor that selectively inhibits 6MP transformation, but leaves xanthine metabolism unaffected. Results Here, we have characterized two such unique inhibitors namely, 2-amino-6-hydroxy-8-mercaptopurine (AHMP and 2-amino-6-purinethiol (APT on the basis of IC50 values, residual activity in bi-substrate simulative reaction and the kinetic parameters like Km, Ki, kcat. The IC50 values of AHMP for xanthine and 6MP as substrate are 17.71 ± 0.29 μM and 0.54 ± 0.01 μM, respectively and the IC50 values of APT for xanthine and 6MP as substrates are 16.38 ± 0.21 μM and 2.57 ± 0.08 μM, respectively. The Ki values of XOD using AHMP as inhibitor with xanthine and 6MP as substrate are 5.78 ± 0.48 μM and 0.96 ± 0.01 μM, respectively. The Ki values of XOD using APT as inhibitor with xanthine and 6MP as substrate are 6.61 ± 0.28 μM and 1.30 ± 0.09 μM. The corresponding Km values of XOD using xanthine and 6MP as substrate are 2.65 ± 0.02 μM and 6.01 ± 0.03 μM, respectively. The results suggest that the efficiency of substrate binding to XOD and its subsequent catalytic hydroxylation is much superior for xanthine in comparison to 6MP. In addition, the efficiency of the inhibitor binding to XOD is much more superior when 6MP is the

  3. 12 CFR 6.20 - Scope.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Scope. 6.20 Section 6.20 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY PROMPT CORRECTIVE ACTION Directives To Take Prompt... part. ...

  4. RPS6KA2, a putative tumour suppressor gene at 6q27 in sporadic epithelial ovarian cancer

    DEFF Research Database (Denmark)

    Bignone, P A; Lee, K Y; Liu, Y

    2007-01-01

    We had previously defined by allele loss studies a minimal region at 6q27 (between D6S264 and D6S297) to contain a putative tumour suppressor gene. The p90 ribosomal S6 kinase-3 gene (p90 Rsk-3, RPS6KA2) maps in this interval. It is a serine-threonine kinase that signals downstream of the mitogen...

  5. 10 CFR 1022.6 - Public inquiries.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Public inquiries. 1022.6 Section 1022.6 Energy DEPARTMENT... REQUIREMENTS General § 1022.6 Public inquiries. Inquiries regarding DOE's floodplain and wetland environmental... at 1-800-472-2756, toll free. ...

  6. Preliminary comparison of MP sparking characteristics for SF6 insulating gas mixtures and pure SF6

    International Nuclear Information System (INIS)

    Lindgren, R.; Wegner, H.E.

    1978-01-01

    Operation of the Brookhaven MP-7 tandem Van de Graaff accelerator with pure SF 6 insulating gas is described. Sparking and terminal voltage were monitored and are compared for operation with a mixture of SF 6 , N 2 , CO 2 and O 2 . The accelerator was found to be more difficult to operate with pure SF 6

  7. Shelving 6 pack crisps

    OpenAIRE

    Garriga Torrecillas, Núria; Otrubova, Natalie; Worm, Robert; Larroque, Thibaut

    2017-01-01

    6-Pack crisps are one of the main products sold by PepsiCo using the standard shelf storage options offered by Tesco PLC. While presenting specific packaging involves a multitude of variables. This report focusses on cognitive recognition, brand confusion and product attractiveness. PepsiCo asked the research team to investigate innovative ways of presenting the crisp 6-pack variant on instore displays. research shows that attraction is crucial in the form of expected rewards. The combination...

  8. 7 CFR 996.6 - Importation.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Importation. 996.6 Section 996.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... peanuts into channels of commerce of the United States. ...

  9. High field magnetoresistance and de Haas-van Alphen effect in antiferromagnetic PrB6 and NdB6

    International Nuclear Information System (INIS)

    Onuki, Y.; Umezawa, A.; Kwok, W.K.; Crabtree, G.W.; Nishihara, M.; Yamazaki, T.; Omi, T.; Komatsubara, T.

    1987-08-01

    The transport properties and the de Haas-van Alphen (dHvA) effect have been measured for antiferromagnetic PrB 6 and NdB 6 . The number of conduction electrons is approximately one per unit cell. The magnetoresistance shows the existence of open orbits implying a multiply connected Fermi surface. The angular dependence of the magnetoresistance is roughly similar to that of the reference material, LaB 6 . The dHvA data in PrB 6 shows both paramagnetic and antiferromagnetic Fermi surfaces. The antiferromagnetic Fermi surface arises from new magnetic Brillouin zone boundaries and antiferromagnetic gaps introduced by the magnetic order, and the paramagnetic Fermi surface from magnetic breakdown through the small antiferromagnetic gaps in high field. Hybridization between the conduction electrons and the f electrons has been observed through the cyclotron masses, which in PrB 6 are three times larger than the corresponding masses of LaB 6 . In NdB 6 only the antiferromagnetic Fermi surface, quite different from those of LaB 6 and PrB 6 , has been observed. 26 refs., 10 figs., 3 tabs

  10. Specific heat and magnetism of LuFe.sub.6./sub.Al.sub.6./sub..

    Czech Academy of Sciences Publication Activity Database

    Svoboda, P.; Andreev, Alexander V.; Šantavá, Eva; Šebek, Josef

    2008-01-01

    Roč. 113, č. 1 (2008), s. 307-310 ISSN 0587-4246. [CSMAG'07. Košice, 09.07.2007-12.07.2007] Institutional research plan: CEZ:AV0Z10100520 Keywords : specific heat * LuFe 6 Al 6 Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.321, year: 2008

  11. 22 CFR 9.6 - Derivative classification.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Derivative classification. 9.6 Section 9.6 Foreign Relations DEPARTMENT OF STATE GENERAL SECURITY INFORMATION REGULATIONS § 9.6 Derivative classification. (a) Definition. Derivative classification is the incorporating, paraphrasing, restating or...

  12. Sensor Proxy Mobile IPv6 (SPMIPv6)—A Novel Scheme for Mobility Supported IP-WSNs

    Science.gov (United States)

    Islam, Md. Motaharul; Huh, Eui-Nam

    2011-01-01

    IP based Wireless Sensor Networks (IP-WSNs) are gaining importance for their broad range of applications in health-care, home automation, environmental monitoring, industrial control, vehicle telematics and agricultural monitoring. In all these applications, mobility in the sensor network with special attention to energy efficiency is a major issue to be addressed. Host-based mobility management protocols are not suitable for IP-WSNs because of their energy inefficiency, so network based mobility management protocols can be an alternative for the mobility supported IP-WSNs. In this paper we propose a network based mobility supported IP-WSN protocol called Sensor Proxy Mobile IPv6 (SPMIPv6). We present its architecture, message formats and also evaluate its performance considering signaling cost, mobility cost and energy consumption. Our analysis shows that with respect to the number of IP-WSN nodes, the proposed scheme reduces the signaling cost by 60% and 56%, as well as the mobility cost by 62% and 57%, compared to MIPv6 and PMIPv6, respectively. The simulation results also show that in terms of the number of hops, SPMIPv6 decreases the signaling cost by 56% and 53% as well as mobility cost by 60% and 67% as compared to MIPv6 and PMIPv6 respectively. It also indicates that proposed scheme reduces the level of energy consumption significantly. PMID:22319386

  13. Sensor Proxy Mobile IPv6 (SPMIPv6—A Novel Scheme for Mobility Supported IP-WSNs

    Directory of Open Access Journals (Sweden)

    Md. Motaharul Islam

    2011-02-01

    Full Text Available IP based Wireless Sensor Networks (IP-WSNs are gaining importance for their broad range of applications in health-care, home automation, environmental monitoring, industrial control, vehicle telematics and agricultural monitoring. In all these applications, mobility in the sensor network with special attention to energy efficiency is a major issue to be addressed. Host-based mobility management protocols are not suitable for IP-WSNs because of their energy inefficiency, so network based mobility management protocols can be an alternative for the mobility supported IP-WSNs. In this paper we propose a network based mobility supported IP-WSN protocol called Sensor Proxy Mobile IPv6 (SPMIPv6. We present its architecture, message formats and also evaluate its performance considering signaling cost, mobility cost and energy consumption. Our analysis shows that with respect to the number of IP-WSN nodes, the proposed scheme reduces the signaling cost by 60% and 56%, as well as the mobility cost by 62% and 57%, compared to MIPv6 and PMIPv6, respectively. The simulation results also show that in terms of the number of hops, SPMIPv6 decreases the signaling cost by 56% and 53% as well as mobility cost by 60% and 67% as compared to MIPv6 and PMIPv6 respectively. It also indicates that proposed scheme reduces the level of energy consumption significantly.

  14. Effect of photoperiod and 6-methoxybenzoxazolinone (6-MBOA) on the reproduction of male Brandt's voles (Lasiopodomys brandtii).

    Science.gov (United States)

    Dai, Xin; Shi, Jia; Han, Mei; Wang, Ai Qin; Wei, Wan Hong; Yang, Sheng Mei

    2017-05-15

    Plant secondary metabolite 6-methoxybenzoxazolinone (6-MBOA) has been suggested to stimulate animal reproduction. 6-MBOA is detected in Leymus chinensis, a main diet of Brandt's vole (Lasiopodomys brandtii). We have previously reported a stimulatory effect of 6-MBOA on reproduction of male Brandt's voles under a short-day photoperiod. The goal of this study was to investigate the effect of 6-MBOA on reproductive physiology of male Brandt's voles under a long-day photoperiod and examine if 6-MBOA under this photoperiodic regime altered the reproductive status of male Brandt's voles differently than the short-day photoperiod. Under the long-day photoperiod, a high dose of 6-MBOA decreased KiSS-1 mRNA in the arcuate nucleus (ARC), and we also saw a decrease in circulating levels of luteinizing hormone (LH), follicle-stimulating hormone (FSH), and testosterone (T). Steroidogenic acute regulatory protein (StAR) and cytochrome P450 11a1 (CYP11a1) in the testes, and relative testis weight also decreased with 6-MBOA administration. Compared to the short-day photoperiod, animals under the long-day photoperiod exhibited increased body weight as well as all other reproductive parameters. Our results showed that 6-MBOA inhibited the reproduction of male Brandt's vole under a long-day photoperiod, a stark contrast from its stimulatory effects under a short-day photoperiod. The paradoxical effects of 6-MBOA suggest it may act as a partial agonist of melatonin. These results provide insight into the complex interactions between environmental factors such as photoperiod and diet in the control of Brandt's vole reproduction. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. The decrease in nonsplenic interleukin-6 (IL-6) production after splenectomy indicates the existence of a positive feedback loop of IL-6 production during endotoxemia in dogs

    NARCIS (Netherlands)

    Moeniralam, H. S.; Bemelman, W. A.; Endert, E.; Koopmans, R.; Sauerwein, H. P.; Romijn, J. A.

    1997-01-01

    The spleen is involved in endotoxin-induced interleukin-6 (IL-6) production. To quantitate the relative contribution of the spleen to endotoxin-induced IL-6 production, we studied the effect of endotoxin (1.0 microg/kg of body weight) in control dogs (n = 7) and splenectomized dogs (n = 7). Blood

  16. A giant enhancement of CMR in Eu{sub 0.6}Ca{sub 0.4}B{sub 6}

    Energy Technology Data Exchange (ETDEWEB)

    Glushkov, V V; Bogach, A V; Demishev, S V; Sluchanko, N E [A.M.Prokhorov General Physics Institute of RAS, 38, Vavilov str., Moscow 119991 (Russian Federation); Anisimov, M A [Moscow Institute of Physics and Technology, 9, Institutskii per., Dolgoprudny, Moscow Region 141700 (Russian Federation); Churkin, O A; Kuznetsov, A V [Moscow Engineering Physics Institute, 31, Kashirskoe Shosse, Moscow 115409 (Russian Federation); Filipov, V B; Levchenko, A V; Shitsevalova, N Yu [I. Frantsevich Institute for Problems of Materials Science NAS, 3, Krzhyzhanovsky str., Kiev 03680 (Ukraine); Flachbart, K, E-mail: glushkov@lt.gpi.r [Centre of Low Temperature Physics, IEP SAS and IPS FS UPJS, Kosice SK-04001 (Slovakia)

    2010-01-15

    The transport and magnetic properties of Eu{sub 0.6}Ca{sub 0.4}B{sub 6} single crystals have been studied at temperatures 1.8-300 K in magnetic fields up to 80 kOe. It was found that lowering of temperature results in a drastic increase of magnetoresistance up to the values of {rho}(0)/{rho}(H){approx}7{center_dot}10{sup 5} detected below 6K. The Hall and Seebeck effect measurements showed that colossal magnetoresistance (CMR) observed in Eu{sub 0.6}Ca{sub 0.4}B{sub 6} is accompanied by a crossover from hole-like to electron-like regime of charge transport induced by applied magnetic field. Hall mobility values {mu}{sub H{approx}}200-350 cm{sup 2}/(Vs) estimated for the high conductive state of Eu{sub 0.6}Ca{sub 0.4}B{sub 6} in the presence of strong substitutional disorder were proved to be comparable with these ones measured for undoped EuB{sub 6}. The anomalous behaviour of transport and magnetic parameters is discussed in terms of metal-insulator transition earlier predicted for this low carrier density system within double exchange model by V M Pereira et al., Phys. Rev. Lett. 93 147202 (2004).

  17. Analysing efficiency of IPv6 packet transmission over 6LoWPAN network

    Science.gov (United States)

    Kozłowski, Adam; Sosnowski, Janusz

    2017-08-01

    Practical proliferation of Internet of Things (IoT) concept depends upon communication efficiency in the related network. In the paper we outline basic features of wireless communication protocols used in IoT and concentrate on analysing communication overheads. In particular, we discuss the impact of IPv6 packet length on 6LoWPAN network operation with physical and MAC layer defined by IEEE 802.15.4 standard. The presented analysis methodology is useful in estimation of the total goodput (throughput at the application level) and energy consumptions within the whole traffic model which are the crucial features of IoT networks.

  18. Platinum complexes of 5,6-Dihydroacenaphtho[5,6-cd]-1,2-dichalcogenoles

    OpenAIRE

    Benson, Callum G. M.; Schofield, Catherine M.; Randall, Rebecca A. M.; Wakefield, Lucy; Knight, Fergus R.; Slawin, Alexandra M. Z.; Woollins, J. Derek

    2013-01-01

    Six bis(phosphane) platinum complexes bearing dichalcogen acenaphthene ligands have been prepared by metathesis from cis-[PtCl2(PR3)(2)] (R-3 = Ph-3, Ph2Me, PhMe2) and the dilithium salts of the parent 5,6-dihydroacenaphtho[5,6-cd]-1,2-dichalcogenoles (AcenapE(2), L1 E = S, L2 E = Se). For their synthesis, the appropriate disulfide or diselenide species was treated with super hydride [LiBEt3H] to afford the dilithium salt by in situ reduction of the AcenapE(2) E-E bond. Further reaction, by m...

  19. 40 CFR 87.6 - Aircraft safety.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Aircraft safety. 87.6 Section 87.6... POLLUTION FROM AIRCRAFT AND AIRCRAFT ENGINES General Provisions § 87.6 Aircraft safety. The provisions of... met within the specified time without creating a safety hazard. ...

  20. 20 CFR 302.6 - Publication requirements.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Publication requirements. 302.6 Section 302.6 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD UNEMPLOYMENT INSURANCE ACT QUALIFIED EMPLOYEE § 302.6 Publication requirements. (a) Publication of base year compensation requirement...

  1. 28 CFR 551.6 - Personal hygiene.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Personal hygiene. 551.6 Section 551.6... Grooming § 551.6 Personal hygiene. The Warden shall make available to an inmate those articles necessary for maintaining personal hygiene. [46 FR 59509, Dec. 4, 1981] ...

  2. 22 CFR 1300.6 - Office location.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Office location. 1300.6 Section 1300.6 Foreign Relations MILLENNIUM CHALLENGE CORPORATION ORGANIZATION AND FUNCTIONS OF THE MILLENNIUM CHALLENGE CORPORATION § 1300.6 Office location. The principal offices of the Millennium Challenge Corporation are...

  3. 32 CFR 637.6 - Customs investigations.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Customs investigations. 637.6 Section 637.6... CRIMINAL INVESTIGATIONS MILITARY POLICE INVESTIGATION Investigations § 637.6 Customs investigations. (a) Customs violations will be investigated as prescribed in AR 190-41. When customs authorities find...

  4. 46 CFR 160.028-6 - Container.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Container. 160.028-6 Section 160.028-6 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS... Container. (a) General. Containers for the stowage of signal pistols and pistol projected parachute red...

  5. Novel marmoset (Callithrix jacchus model of human Herpesvirus 6A and 6B infections: immunologic, virologic and radiologic characterization.

    Directory of Open Access Journals (Sweden)

    Emily Leibovitch

    2013-01-01

    Full Text Available Human Herpesvirus 6 (HHV-6 is a ubiquitous virus with an estimated seroprevalence of 95% in the adult population. HHV-6 is associated with several neurologic disorders, including multiple sclerosis, an inflammatory demyelinating disease affecting the CNS. Animal models of HHV-6 infection would help clarify its role in human disease but have been slow to develop because rodents lack CD46, the receptor for cellular entry. Therefore, we investigated the effects of HHV-6 infections in a non-human primate, the common marmoset Callithrix jacchus. We inoculated a total of 12 marmosets with HHV-6A and HHV-6B intravenously and HHV-6A intranasally. Animals were monitored for 25 weeks post-inoculation clinically, immunologically and by MRI. Marmosets inoculated with HHV-6A intravenously exhibited neurologic symptoms and generated virus-specific antibody responses, while those inoculated intravenously with HHV-6B were asymptomatic and generated comparatively lower antibody responses. Viral DNA was detected at a low frequency in paraffin-embedded CNS tissue of a subset of marmosets inoculated with HHV-6A and HHV-6B intravenously. When different routes of HHV-6A inoculation were compared, intravenous inoculation resulted in virus-specific antibody responses and infrequent detection of viral DNA in the periphery, while intranasal inoculation resulted in negligible virus-specific antibody responses and frequent detection of viral DNA in the periphery. Moreover, marmosets inoculated with HHV-6A intravenously exhibited neurologic symptoms, while marmosets inoculated with HHV-6A intranasally were asymptomatic. We demonstrate that a marmoset model of HHV-6 infection can serve to further define the contribution of this ubiquitous virus to human neurologic disorders.

  6. The TRPM6 Kinase Domain Determines the Mg·ATP Sensitivity of TRPM7/M6 Heteromeric Ion Channels*

    Science.gov (United States)

    Zhang, Zheng; Yu, Haijie; Huang, Junhao; Faouzi, Malika; Schmitz, Carsten; Penner, Reinhold; Fleig, Andrea

    2014-01-01

    The transient receptor potential melastatin member 7 (TRPM7) and member 6 (TRPM6) are divalent cation channel kinases essential for magnesium (Mg2+) homeostasis in vertebrates. It remains unclear how TRPM6 affects divalent cation transport and whether this involves functional homomeric TRPM6 plasma membrane channels or heteromeric channel assemblies with TRPM7. We show that homomeric TRPM6 is highly sensitive to intracellular free Mg2+ and therefore unlikely to be active at physiological levels of [Mg2+]i. Co-expression of TRPM7 and TRPM6 produces heteromeric TRPM7/M6 channels with altered pharmacology and sensitivity to intracellular Mg·ATP compared with homomeric TRPM7. Strikingly, the activity of heteromeric TRPM7/M6 channels is independent of intracellular Mg·ATP concentrations, essentially uncoupling channel activity from cellular energy status. Disruption of TRPM6 kinase phosphorylation activity re-introduces Mg·ATP sensitivity to the heteromeric channel similar to that of TRPM7. Thus, TRPM6 modulates the functionality of TRPM7, and the TRPM6 kinase plays a critical role in tuning the phenotype of the TRPM7·M6 channel complex. PMID:24385424

  7. The TRPM6 kinase domain determines the Mg·ATP sensitivity of TRPM7/M6 heteromeric ion channels.

    Science.gov (United States)

    Zhang, Zheng; Yu, Haijie; Huang, Junhao; Faouzi, Malika; Schmitz, Carsten; Penner, Reinhold; Fleig, Andrea

    2014-02-21

    The transient receptor potential melastatin member 7 (TRPM7) and member 6 (TRPM6) are divalent cation channel kinases essential for magnesium (Mg(2+)) homeostasis in vertebrates. It remains unclear how TRPM6 affects divalent cation transport and whether this involves functional homomeric TRPM6 plasma membrane channels or heteromeric channel assemblies with TRPM7. We show that homomeric TRPM6 is highly sensitive to intracellular free Mg(2+) and therefore unlikely to be active at physiological levels of [Mg(2+)]i. Co-expression of TRPM7 and TRPM6 produces heteromeric TRPM7/M6 channels with altered pharmacology and sensitivity to intracellular Mg·ATP compared with homomeric TRPM7. Strikingly, the activity of heteromeric TRPM7/M6 channels is independent of intracellular Mg·ATP concentrations, essentially uncoupling channel activity from cellular energy status. Disruption of TRPM6 kinase phosphorylation activity re-introduces Mg·ATP sensitivity to the heteromeric channel similar to that of TRPM7. Thus, TRPM6 modulates the functionality of TRPM7, and the TRPM6 kinase plays a critical role in tuning the phenotype of the TRPM7·M6 channel complex.

  8. IPv6 Testing

    National Research Council Canada - National Science Library

    Landis, Christopher B

    2006-01-01

    .... The DoD is also forming working relationships to conduct testing and share information. IPv6 was developed to resolve the issues of IPv4, mainly the limited amount of addresses and lack of security...

  9. Vitamin B6

    Science.gov (United States)

    ... off the market in 1983 because they were running up expensive legal bills in defense of their ... effects and are not likely to increase the beneficial effects. Movement disorders (tardive dyskinesia).Taking vitamin B6 ...

  10. Enzymatic surface hydrolysis of polyamide 6,6 with mixtures of proteolytic and lipolytic enzymes.

    Science.gov (United States)

    Parvinzadeh Gashti, Mazeyar; Assefipour, Reza; Kiumarsi, Amir; Parvinzadeh Gashti, Mahyar

    2013-01-01

    This study investigated the changes induced on nylon 6,6 fabric by a mixture of proteolytic and lipolytic enzymes. Technical measurements were studied including those of Fourier-transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), weight loss (WL), bending lengths (BL), scanning electron microscopy (SEM), moisture absorbency (MA), and reflectance spectroscopy (RS). For this purpose, nylon 6,6 fabrics were treated separately with different concentrations of protease and lipase mixtures in solution. The dyeing process was then carried out on the treated fabrics with two reactive and acid dyes. The intensity of major peaks in the FTIR spectra of the protease-treated samples is in favor of chemical changes the polypeptide functional groups in the fabrics. Thermal studies also show a significant decrease in the thermal degradation temperature of the treated polymer at temperatures higher than 400°C. The protease and lipase mixtures decreased the sample weight, while lipase intensified the weight loss comparing with protease. It was observed that the concentration of lipase enzyme had a direct influence on the darkness of dyed samples.

  11. Analysis list: Bcl6 [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Bcl6 Blood,Liver,Pancreas + mm9 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/target/Bcl6.1.tsv http:...//dbarchive.biosciencedbc.jp/kyushu-u/mm9/target/Bcl6.5.tsv http://dbarchive.biosciencedb...c.jp/kyushu-u/mm9/target/Bcl6.10.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/colo/Bcl6.Blood.tsv,http:...//dbarchive.biosciencedbc.jp/kyushu-u/mm9/colo/Bcl6.Liver.tsv,http://dbarchive.b...iosciencedbc.jp/kyushu-u/mm9/colo/Bcl6.Pancreas.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/colo/Blood.gml,http:

  12. 44 CFR 6.2 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Definitions. 6.2 Section 6.2 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF HOMELAND SECURITY... those concerning education, financial transactions, medical history, and criminal or employment history...

  13. Molecular Characterization of Glucose-6-Phosphate ...

    African Journals Online (AJOL)

    HP

    The total prevalence of G6PD deficiency among the subjects was 4.59 % (4/87), all of whom were. Malay males. One of the deficient subjects had G6PD Viangchan, while the other three were G6PD. Mahidol ..... J Paediatr Child Health .1991 ...

  14. 7 CFR 948.6 - Seed potatoes.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Seed potatoes. 948.6 Section 948.6 Agriculture... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE IRISH POTATOES GROWN IN COLORADO Order Regulating Handling Definitions § 948.6 Seed potatoes. Seed potatoes or seed means any potatoes...

  15. 7 CFR 371.6 - Wildlife Services.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Wildlife Services. 371.6 Section 371.6 Agriculture..., DEPARTMENT OF AGRICULTURE ORGANIZATION, FUNCTIONS, AND DELEGATIONS OF AUTHORITY § 371.6 Wildlife Services. (a) General statement. Wildlife Services (WS) manages problems caused by wildlife. (b) Deputy Administrator of...

  16. 10 CFR 1706.6 - Solicitation provisions.

    Science.gov (United States)

    2010-01-01

    ... organizational conflicts of interest certificate from any marketing consultants engaged by an offeror in support... 10 Energy 4 2010-01-01 2010-01-01 false Solicitation provisions. 1706.6 Section 1706.6 Energy DEFENSE NUCLEAR FACILITIES SAFETY BOARD ORGANIZATIONAL AND CONSULTANT CONFLICTS OF INTERESTS § 1706.6...

  17. 7 CFR 981.6 - Shelled almonds.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Shelled almonds. 981.6 Section 981.6 Agriculture... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE ALMONDS GROWN IN CALIFORNIA Order Regulating Handling Definitions § 981.6 Shelled almonds. Shelled almonds mean raw or roasted almonds after...

  18. 7 CFR 1773.6 - Auditor communication.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false Auditor communication. 1773.6 Section 1773.6... AGRICULTURE (CONTINUED) POLICY ON AUDITS OF RUS BORROWERS RUS Audit Requirements § 1773.6 Auditor... the auditor to communicate certain information regarding the nature and extent of testing and...

  19. 49 CFR 178.33-6 - Manufacture.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Manufacture. 178.33-6 Section 178.33-6 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... Specifications for Inside Containers, and Linings § 178.33-6 Manufacture. (a) By appliances and methods that will...

  20. Application of 6D Building Information Model (6D BIM) for Business-storage Building in Slovenia

    Science.gov (United States)

    Pučko, Zoran; Vincek, Dražen; Štrukelj, Andrej; Šuman, Nataša

    2017-10-01

    The aim of this paper is to present an application of 6D building information modelling (6D BIM) on a real business-storage building in Slovenia. First, features of building maintenance in general are described according to the current Slovenian legislation, and also a general principle of BIM is given. After that, step-by-step activities for modelling 6D BIM are exposed, namely from Element list for maintenance, determination of their lifetime and service measures, cost analysing and time analysing to 6D BIM modelling. The presented 6D BIM model is designed in a unique way in which cost analysis is performed as 5D BIM model with linked data to use BIM Construction Project Management Software (Vico Office), integrated with 3D BIM model, whereas time analysis as 4D BIM model is carried out as non-linked data with the help of Excel (without connection to 3D BIM model). The paper is intended to serve as a guide to the building owners to prepare 6D BIM and to provide an insight into the relevant dynamic information about intervals and costs for execution of maintenance works in the whole building lifecycle.

  1. Making the Information Manager (G6/J6): Leveraging Information Management to Achieve Information Dominance

    National Research Council Canada - National Science Library

    Cross, Frederick

    2002-01-01

    The three primary communications disciplines offered to signal officers by the U.S. Army Signal Corps separately do not meet the educational and training needs required of the G6/J6 Information Manager to support future doctrine...

  2. Growth arrest specific protein (GAS) 6

    DEFF Research Database (Denmark)

    Haase, T N; Rasmussen, Morten; Jaksch, C A M

    2013-01-01

    using RNA microarray and quantitative PCR. The role of a differentially expressed gene, growth arrest specific protein 6 (GAS6), was evaluated in vitro using neonatal rat islets. Results The mRNA level of Gas6, known to be mitogenic in other tissues, was reduced in LP offspring. The mRNA content of Mafa...... was increased in LP offspring suggesting an early maturation of beta cells. When applied in vitro, GAS6 increased proliferation of neonatal pancreatic beta cells, while reducing glucose-stimulated insulin secretion without changing the total insulin content of the islets. In addition, GAS6 decreased the m......RNA content of Mafa. Conclusions/interpretation We propose a role for GAS6 in the regulation of pancreatic beta cells in the critical period around the time of birth. Our results support the hypothesis that the reduced beta cell mass seen in LP offspring is caused by a change in the intra-uterine environment...

  3. Measurement of the figure of merit M for 1-C3F6/SF6 mixtures

    DEFF Research Database (Denmark)

    Christensen, Jørn Erik Berril; McAllister, Iain Wilson

    1997-01-01

    High precision measurements of the linear part of the Paschen curve are reported for 1-C3F6/SF6 mixtures. From these measurements, values for the pressure-reduced limiting electric field strength (E/p)lim and the associated figure of merit M are derived. These two parameters can be used to charac......High precision measurements of the linear part of the Paschen curve are reported for 1-C3F6/SF6 mixtures. From these measurements, values for the pressure-reduced limiting electric field strength (E/p)lim and the associated figure of merit M are derived. These two parameters can be used...

  4. Effect of Graphene Nanoplatelets (GNPs on Tribological and Mechanical Behaviors of Polyamide 6 (PA6

    Directory of Open Access Journals (Sweden)

    F. Mindivan

    2017-09-01

    Full Text Available The effects of Graphene Nanoplatelet (GNP on mechanical and tribological properties of Polyamide 6 (PA6 were studied. The composites were blended using twin-screw extruder and subsequently injection molded for test samples. Mechanical properties were investigated in terms of microhardness, scratch hardness and Young’s modulus measurements and tensile test. The tribological behavior of composites was studied by using ball-on-disc reciprocating tribometer. Recent studies showed that the addition of GNP in PA6 matrix resulted in enhancement of mechanical and tribological properties.

  5. Studies of the pressure-induced phase transition of C sub 3 N sub 6 H sub 6

    CERN Document Server

    Ma Hong An; Cui Qi Liang; Pan Yue Wu; Zhu Pin Wen; Guo Wei; Chen Li Xue; Ren Guo Zheng; Zou Guang Tian; LiuJing

    2002-01-01

    In situ high pressure energy dispersive X-ray diffraction experiments have been carried out on C sub 3 N sub 6 H sub 6 by using diamond anvil cell (DAC) device with synchrotron radiation source. Two structural phase transitions of C sub 3 N sub 6 H sub 6 have been observed within 14.7 GPa pressure range, from monoclinic to triclinic structure at 1.3 GPa and from triclinic to orthorhombic structure at 8.2 GPa, respectively

  6. 30 CFR 881.6 - Project contract.

    Science.gov (United States)

    2010-07-01

    ... contractors or suppliers for the construction, installation, services or work to be performed. (b) Project... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Project contract. 881.6 Section 881.6 Mineral... LAND RECLAMATION SUBSIDENCE AND STRIP MINE REHABILITATION, APPALACHIA § 881.6 Project contract. (a...

  7. 7 CFR 2903.6 - Project types.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Project types. 2903.6 Section 2903.6 Agriculture... AGRICULTURE BIODIESEL FUEL EDUCATION PROGRAM Program Description § 2903.6 Project types. OEPNU intends to... predetermined project period with a statement of intention to provide additional support at a future date...

  8. 12 CFR 711.6 - General exemption.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false General exemption. 711.6 Section 711.6 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS MANAGEMENT... are members of a minority group or women; (3) Is a depository institution that has been chartered for...

  9. 7 CFR 1000.6 - Supply plant.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Supply plant. 1000.6 Section 1000.6 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Definitions § 1000.6 Supply plant. Supply plant means a plant approved by a duly constituted regulatory agency...

  10. 29 CFR 525.6 - Compensable time.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Compensable time. 525.6 Section 525.6 Labor Regulations... WITH DISABILITIES UNDER SPECIAL CERTIFICATES § 525.6 Compensable time. Individuals employed subject to this part must be compensated for all hours worked. Compensable time includes not only those hours...

  11. 45 CFR 1305.6 - Selection process.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Selection process. 1305.6 Section 1305.6 Public... PROGRAM ELIGIBILITY, RECRUITMENT, SELECTION, ENROLLMENT AND ATTENDANCE IN HEAD START § 1305.6 Selection process. (a) Each Head Start program must have a formal process for establishing selection criteria and...

  12. 22 CFR 209.6 - Compliance information.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Compliance information. 209.6 Section 209.6... § 209.6 Compliance information. (a) Cooperation and assistance. The Administrator shall to the fullest... and accurate compliance reports at such times, and in such form and containing such information, as...

  13. 40 CFR 1600.6 - Office location.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Office location. 1600.6 Section 1600.6 Protection of Environment CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD ORGANIZATION AND FUNCTIONS OF THE CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD § 1600.6 Office location. The principal offices of the...

  14. 28 CFR 51.6 - Political subunits.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Political subunits. 51.6 Section 51.6 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) PROCEDURES FOR THE ADMINISTRATION OF SECTION 5 OF THE VOTING RIGHTS ACT OF 1965, AS AMENDED General Provisions § 51.6 Political subunits. All political...

  15. IPv6 Geolocation Using Latency Constraints

    Science.gov (United States)

    2014-03-01

    ground truth datasets. In doing so, we investigate the following: • What is the accuracy of CBG when geolocating IPv6 hosts? • What are the accuracy...the overall PL is shorter for IPv6 than IPv4 which is consistent to what was found in recent work discussed in Section 3.5. Note that the average PL...growth of IPv6 addresses has increased significantly since 2010.The rate of increase of IPv6 usage is expected to continue; thus the need to determine

  16. 15 CFR 301.6 - Appeals.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Appeals. 301.6 Section 301.6 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE MISCELLANEOUS REGULATIONS INSTRUMENTS AND APPARATUS FOR EDUCATIONAL AND...

  17. 31 CFR 210.6 - Agencies.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Agencies. 210.6 Section 210.6 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY FINANCIAL MANAGEMENT SERVICE FEDERAL GOVERNMENT PARTICIPATION IN THE AUTOMATED...

  18. A third-generation dispersion and third-generation hydrogen bonding corrected PM6 method: PM6-D3H+

    Directory of Open Access Journals (Sweden)

    Jimmy C. Kromann

    2014-06-01

    Full Text Available We present new dispersion and hydrogen bond corrections to the PM6 method, PM6-D3H+, and its implementation in the GAMESS program. The method combines the DFT-D3 dispersion correction by Grimme et al. with a modified version of the H+ hydrogen bond correction by Korth. Overall, the interaction energy of PM6-D3H+ is very similar to PM6-DH2 and PM6-DH+, with RMSD and MAD values within 0.02 kcal/mol of one another. The main difference is that the geometry optimizations of 88 complexes result in 82, 6, 0, and 0 geometries with 0, 1, 2, and 3 or more imaginary frequencies using PM6-D3H+ implemented in GAMESS, while the corresponding numbers for PM6-DH+ implemented in MOPAC are 54, 17, 15, and 2. The PM6-D3H+ method as implemented in GAMESS offers an attractive alternative to PM6-DH+ in MOPAC in cases where the LBFGS optimizer must be used and a vibrational analysis is needed, e.g., when computing vibrational free energies. While the GAMESS implementation is up to 10 times slower for geometry optimizations of proteins in bulk solvent, compared to MOPAC, it is sufficiently fast to make geometry optimizations of small proteins practically feasible.

  19. Structure based modification of Bluetongue virus helicase protein VP6 to produce a viable VP6-truncated BTV

    Energy Technology Data Exchange (ETDEWEB)

    Matsuo, Eiko [Microbiology and Immunology, Division of Animal Science, Department of Bioresource Science, Graduate School of Agricultural Science, Kobe University, 1-1, Rokkodai, Nada-ku, Kobe-City 657-8501 (Japan); Faculty of Infectious and Tropical Diseases, London School of Hygiene and Tropical Medicine, Keppel Street, London WC1E 7HT (United Kingdom); Leon, Esther; Matthews, Steve J. [Division of Molecular Biosciences, Centre for Structural Biology, Imperial College London, South Kensington, London SW7 2AZ (United Kingdom); Roy, Polly, E-mail: polly.roy@lshtm.ac.uk [Faculty of Infectious and Tropical Diseases, London School of Hygiene and Tropical Medicine, Keppel Street, London WC1E 7HT (United Kingdom)

    2014-09-05

    Highlights: • NMR analysis on BTV VP6 reveals two large loop regions. • The loss of a loop (aa 34–130) does not affect the overall fold of the protein. • A region of VP6 (aa 34–92) is not required for BTV replication. • A region of VP6 (aa 93–130) plays an essential role in the virus replication. - Abstract: Bluetongue virus core protein VP6 is an ATP hydrolysis dependent RNA helicase. However, despite much study, the precise role of VP6 within the viral capsid and its structure remain unclear. To investigate the requirement of VP6 in BTV replication, we initiated a structural and biological study. Multinuclear nuclear magnetic resonance spectra were assigned on his-tagged full-length VP6 (329 amino acid residues) as well as several truncated VP6 variants. The analysis revealed a large structured domain with two large loop regions that exhibit significant conformational exchange. One of the loops (amino acid position 34–130) could be removed without affecting the overall fold of the protein. Moreover, using a BTV reverse genetics system, it was possible to demonstrate that the VP6-truncated BTV was viable in BHK cells in the absence of any helper VP6 protein, suggesting that a large portion of this loop region is not absolutely required for BTV replication.

  20. Mediterranean glucose-6-phosphate dehydrogenase (G6PDC563T) mutation among jordanian females with acute hemolytic crisis

    International Nuclear Information System (INIS)

    Jabbar, A.A.; Kanakiri, N.; Kamil, M.; Rimawi, H.S.A.

    2010-01-01

    To evaluate the G6PDC563T Mediterranean mutation among Jordanian females who were admitted to Princess Rahma Teaching Hospital (PRTH) with/or previous history of favism. Study Design: A descriptive study. Place and Duration of Study: Jordanian University of Science and Technology and PRTH, from October 2003 to October 2004. Methodology: After obtaining approval from the Ethics Committee of Jordanian University of Science and Technology, a total of 32 females were included in this study. Samples from 15 healthy individual females were used as a negative control. Blood samples from these patients were collected and analyzed by allele-specific polymerase chain reaction (AS-PCR) to determine the G6PDC563T mutation. Results: Twenty one out of 32 patients were found to be G6PDC563T Mediterranean mutation (65.6%) positive. Three out of 21 patients were homozygous and remaining 18 were heterozygous for G6PDC563T Mediterranean mutation. Eleven (34.4%) out of 32 patients were found to be negative for G6PDC563T mutation indicating the presence of other G6PD mutations in the study sample. Conclusion: G6PDC563T Mediterranean mutation accounted for 65.6% of the study sample with favism in the North of Jordan. There is likely to be another G6PD deficiency variant implicated in acute hemolytic crisis (favism). (author)