WorldWideScience

Sample records for steering committee planning

  1. Strategic planning by the palliative care steering committee of the Middle East Cancer Consortium.

    Science.gov (United States)

    Moore, Shannon Y; Pirrello, Rosene D; Christianson, Sonya K; Ferris, Frank D

    2011-04-01

    High quality comprehensive palliative care is a critical need for millions of patients and families, but remains only a dream in many parts of the world. The failure to do a strategic planning process is one obstacle to advancing education and pain prevention and relief. The Middle Eastern Cancer Consortium Steering Committee attendees completed an initial strategic planning process and identified "developmental steps" to advance palliative care. Underscoring the multi-disciplinary nature of comprehensive palliative care, discipline-specific planning was done (adult and pediatric cancer and medicine, pharmacy, nursing) in a separate process from country-specific planning. Delineating the layers of intersection and differences between disciplines and countries was very powerful. Finding the common strengths and weaknesses in the status quo creates the potential for a more powerful regional response to the palliative care needs. Implementing and refining these preliminary strategic plans will augment and align the efforts to advance palliative care education and pain management in the Middle East. The dream to prevent and relieve suffering for millions of patients with advanced disease will become reality with a powerful strategic planning process well implemented.

  2. CCCT - NCTN Steering Committees - Pediatric and Adolescent Tumor

    Science.gov (United States)

    The Pediatric and Adolescent Solid Tumor Steering Committee addresses the design, prioritization and evaluation of concepts for large phase 2 and phase 3 clinical trials in extracranial solid tumors of children and youth.

  3. The steering committee for the marketing of radurised foods

    International Nuclear Information System (INIS)

    Wessels, P.J.

    1985-01-01

    After the very successful results obtained during the initial research stage of food irradiation, a need was felt for the commercial application of the process. Although few, if any, other food processing methods have been so thoroughly investigated prior to acceptance, several factors influenced the spontaneous implementation thereof. A definite need for co-ordination of commercial trials and proper commercial introduction of the process which invited so many discussions world-wide, led to the introduction of the Steering Committee for Radurised Foodstuffs in South Africa by the Minister of Agriculture during 1981. The Steering Committee was established to advise the Minister of Agriculture regarding the acceptability of the process and the progress made in this regard. The Minister of Agriculture (now Agricultural Economics and Water Affairs) fulfills an important role in the marketing of agricultural products in South Africa. Many decisions and recommendations of Organised Agriculture and of the different Marketing Boards are subject to the final approval or acceptance by the Minister. It is therefore important that he will be informed and advised regarding radurisation of foodstuffs and related aspects

  4. Work Plans 2011 – Norwegian Scientific Committee for Food Safety

    OpenAIRE

    Norwegian Scientific Committee for Food Safety

    2011-01-01

    The annual work plan for 2011 summaries activities for the Scientific Steering Committee and the 9 panels of the Norwegian Scientific Committee for Food Safety (VKM). VKM carries out independent risk assessments for the Norwegian Food Safety Authority across the Authority’s field of responsibility as well as environmental risk assessments of genetically modified organisms for the Directorate for Nature Management.

  5. Robotic needle steering: design, modeling, planning, and image guidance

    NARCIS (Netherlands)

    Cowan, Noah J.; Goldberg, Ken; Chirikjian, Gregory S.; Fichtinger, Gabor; Alterovitz, Ron; Reed, Kyle B.; Kallem, Vinutha; Misra, Sarthak; Park, Wooram; Okamura, Allison M.; Rosen, Jacob; Hannaford, Blake; Satava, Richard M.

    2010-01-01

    This chapter describes how advances in needle design, modeling, planning, and image guidance make it possible to steer flexible needles from outside the body to reach specified anatomical targets not accessible using traditional needle insertion methods. Steering can be achieved using a variety of

  6. International Linear Collider Steering Committee issues charge to Technology Recommendation Panel

    CERN Multimedia

    2003-01-01

    "Following its November 19 meeting in Paris, the International Linear Collider Steering Committee, a subcommittee of the International Committee for Future Accelerators, has published the charge http://www.fnal.gov/directorate/icfa/ITRP_Charge.pdf to the International Technology Recommendation Panel appointed by ICFA" (2 paragraphs).

  7. Annual report for the steering committee of the association Euratom-Belgian State for fusion 1996

    International Nuclear Information System (INIS)

    Moons, F.; Bogaerts, W.; Decreton, M.; Biver, E.; Coenen, S.; Benoit, Ph.; Coheur, L.; Deboodt, P.; Andreev, D.

    1996-09-01

    This report is prepared for the annual steering committee meting of the Association Euratom - Belgian State for Fusion. The period October 1995 to September 1996 is reported on.The fusion technology work performed at the Belgian Nuclear Research Centre SCK/CEN, the Department of Metallurgy and Materials Engineering of the Louvain University (Belgium) and S.A. Gradel, a Luxemburg company, is described

  8. Minutes of Technical Division Steering Committee Meeting, September 13, 1955 -- Savannah River Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Evans, L.C.

    1955-09-16

    The Steering Committee approved 8 studies related to separation processes, analytical chemistry, waste handling, and recycle development. Safety and security issues were discussed. Appendices detail the financial status of the Technical Division and estimated man months for development studies approved for the Purex Process, tritium separations, thorium recycle, U-235 separations, and 100-, 200-, and 300-Area studies in analytical chemistry development. The status of 25 other Technical Division studies are listed along with their budget.

  9. Annual report for the steering committee of the association Euratom-Belgian State for fusion 1996

    Energy Technology Data Exchange (ETDEWEB)

    Moons, F.; Bogaerts, W.; Decreton, M.; Biver, E.; Coenen, S.; Benoit, Ph.; Coheur, L.; Deboodt, P.; Andreev, D.

    1996-09-01

    This report is prepared for the annual steering committee meting of the Association Euratom - Belgian State for Fusion. The period October 1995 to September 1996 is reported on.The fusion technology work performed at the Belgian Nuclear Research Centre SCK/CEN, the Department of Metallurgy and Materials Engineering of the Louvain University (Belgium) and S.A. Gradel, a Luxemburg company, is described.

  10. IAEA International Database on Irradiated Nuclear Graphite Properties. 7th meeting of the Technical Steering Committee

    International Nuclear Information System (INIS)

    Humbert, D.; Wickham, A.J.

    2005-06-01

    This report summarizes the Consultant Meeting '7th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties' held on 16-17 March 2005 at the IAEA Headquarters, Vienna, Austria. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database and to make recommendations for actions for the next year. The purposes of the meeting were fully met. This report contains the current status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  11. Annual report for the steering committee of the association Euratom-Belgian State for fusion 1998

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    1998-10-01

    This report is prepared for the annual steering committee meting of the Association Euratom - Belgian State in the area of fusion reactor technology. The Belgian contribution focuses on the assessment of the first wall and blanket materials under radiation and coolant interaction and on developments for the remote handling in maintenance activities. The period October 1997 to September 1998 is reported on.The fusion technology work performed at the Belgian Nuclear Research Centre SCK/CEN, the Department of Metallurgy and Materials Engineering of the Louvain University (Belgium) and S.A. Gradel, a Luxemburg-based organisation, is described.

  12. Annual report for the steering committee of the association Euratom-Belgian State for fusion 1999

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    1999-10-01

    This report is prepared for the annual steering committee meting of the Association Euratom - Belgian State in the area of fusion reactor technology. The Belgian contribution focuses on the assessment of the first wall and blanket materials under radiation and coolant interaction and on developments for the remote handling in maintenance activities. The period October 1998 to September 1999 is reported on.The fusion technology work performed at the Belgian Nuclear Research Centre SCK/CEN, the Department of Metallurgy and Materials Engineering of the Louvain University (Belgium) and S.A. Gradel, a Luxemburg-based organisation, is described.

  13. Annual report for the steering committee of the association Euratom-Belgian State for fusion 1999

    International Nuclear Information System (INIS)

    Decreton, M.

    1999-10-01

    This report is prepared for the annual steering committee meting of the Association Euratom - Belgian State in the area of fusion reactor technology. The Belgian contribution focuses on the assessment of the first wall and blanket materials under radiation and coolant interaction and on developments for the remote handling in maintenance activities. The period October 1998 to September 1999 is reported on.The fusion technology work performed at the Belgian Nuclear Research Centre SCK/CEN, the Department of Metallurgy and Materials Engineering of the Louvain University (Belgium) and S.A. Gradel, a Luxemburg-based organisation, is described

  14. IAEA International Database on Irradiated Nuclear Graphite Properties. 6th meeting of the Technical Steering Committee

    International Nuclear Information System (INIS)

    Humbert, D.; Wickham, A.J.

    2004-12-01

    This report summarizes the Consultant Meeting 6th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties' held on 16-17 September 2004 at Plas Tan-Y-Bwlch, Maentwrog, Gwynedd, UK. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database and to make recommendations for actions for the next year. The purposes of the meeting were fully met. This report contains the current status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  15. Annual report for the steering committee of the association Euratom-Belgian State for fusion 1998

    International Nuclear Information System (INIS)

    Decreton, M.

    1998-10-01

    This report is prepared for the annual steering committee meting of the Association Euratom - Belgian State in the area of fusion reactor technology. The Belgian contribution focuses on the assessment of the first wall and blanket materials under radiation and coolant interaction and on developments for the remote handling in maintenance activities. The period October 1997 to September 1998 is reported on.The fusion technology work performed at the Belgian Nuclear Research Centre SCK/CEN, the Department of Metallurgy and Materials Engineering of the Louvain University (Belgium) and S.A. Gradel, a Luxemburg-based organisation, is described

  16. Marketing of radurised food in South Africa: review of a steering committee

    International Nuclear Information System (INIS)

    Basson, J.K.; Basson, R.A.; Brodrick, H.T.; Du Plessis, T.A.

    1993-01-01

    The marketing of radurised food has been developed by a Steering Committee appointed by the Minister of Agriculture in 1981. Membership included representatives from relevant government departments, scientific institutions, organised agriculture, commerce, consumer organisations and the food industry. Its investigations concentrated on the application of the radurisation process to the commercial treatment of food in South Africa and included marketing trials, public perception, safety aspects and possible international trade. Results of a recent status report are presented, which could serve as an example to other countries developing commercial radurisation. (Author)

  17. Exploring the role and function of trial steering committees: results of an expert panel meeting.

    Science.gov (United States)

    Harman, Nicola L; Conroy, Elizabeth J; Lewis, Steff C; Murray, Gordon; Norrie, John; Sydes, Matt R; Lane, J Athene; Altman, Douglas G; Baigent, Colin; Bliss, Judith M; Campbell, Marion K; Elbourne, Diana; Evans, Stephen; Sandercock, Peter; Gamble, Carrol

    2015-12-30

    The independent oversight of clinical trials, which is recommended by the Medical Research Council (MRC) Guidelines for Good Clinical Practice, is typically provided by an independent advisory Data Monitoring Committee (DMC) and an independent executive committee, to whom the DMC makes recommendations. The detailed roles and function of this executive committee, known as the Trial Steering Committee (TSC), have not previously been studied or reviewed since those originally proposed by the MRC in 1998. An expert panel (n = 7) was convened comprising statisticians, clinicians and trial methodologists with prior TSC experience. Twelve questions about the role and responsibilities of the TSC were discussed by the panel at two full-day meetings. Each meeting was transcribed in full and the discussions were summarised. The expert panel reached agreement on the role of the TSC, to which it was accountable, the membership, the definition of independence, and the experience and training needed. The management of ethical issues, difficult/complex situations and issues the TSC should not ask the DMC to make recommendations on were more difficult to discuss without specific examples, but support existed for further work to help share issues and to provide appropriate training for TSC members. Additional topics discussed, which had not been identified by previous work relating to the DMCs but were pertinent to the role of the TSC, included the following: review of data sharing requests, indemnity, lifespan of the TSC, general TSC administration, and the roles of both the Funder and the Sponsor. This paper presents recommendations that will contribute to the revision and update of the MRC TSC terms of reference. Uncertainty remains in some areas due to the absence of real-life examples; future guidance on these issues would benefit from a repository of case studies. Notably, the role of a patient and public involvement (PPI) contributor was not discussed, and further work is

  18. Local Emergency Planning Committee (LEPC) Data

    Data.gov (United States)

    U.S. Environmental Protection Agency — The LEPC data set contains over 3000 listings, as of 2008, for name and location data identifying Local Emergency Planning Committees (LEPCs). LEPCs are people...

  19. Steering Committee Progress Report on Hydrogen Sensor Performance Testing and Evaluation under the Memorandum of Agreement between NREL, U.S. DOE and JRC-IET, EC

    Energy Technology Data Exchange (ETDEWEB)

    Buttner, W.; Post, M.; Burgess, R.; Rivkin, C.; Boon-Brett, L.; Palmisano, V.; Bonato, C.; Harskamp, F.

    2012-12-01

    This progress report is a programmatic summary of a formal MOA between NREL and the European Union Joint Research Center, Institute for Energy and Transport to be presented at the Steering Committee Meeting, December 3, 2012.

  20. Implementing an interprofessional patient safety learning initiative: insights from participants, project leads and steering committee members.

    Science.gov (United States)

    Jeffs, Lianne; Abramovich, Ilona Alex; Hayes, Chris; Smith, Orla; Tregunno, Deborah; Chan, Wai-Hin; Reeves, Scott

    2013-11-01

    Effective teamwork and interprofessional collaboration are vital for healthcare quality and safety; however, challenges persist in creating interprofessional teamwork and resilient professional teams. A study was undertaken to delineate perceptions of individuals involved with the implementation of an interprofessional patient safety competency-based intervention and intervention participants. The study employed a qualitative study design that triangulated data from interviews with six steering committee members and five members of the project team who developed and monitored the intervention and six focus groups with clinical team members who participated in the intervention and implemented local patient safety projects within a large teaching hospital in Canada. Our study findings reveal that healthcare professionals and support staff acquired patient safety competencies in an interprofessional context that can result in improved patient and work flow processes. However, key challenges exist including managing projects amidst competing priorities, lacking physician engagement and sustaining projects. Our findings point to leaders to provide opportunities for healthcare teams to engage in interprofessional teamwork and patient safety projects to improve quality of patient care. Further research efforts should examine the sustainability of interprofessional safety projects and how leaders can more fully engage the participation of all professions, specifically physicians.

  1. Planning analysis and political steering with New Public Management

    DEFF Research Database (Denmark)

    Sager, Tore Øivin; Sørensen, Claus Hedegaard

    2011-01-01

    of interviews sheds light on the apparent paradox that parliamentarians accept delegation of highway investment decisions despite their profound scepticism to the cost-benefit analyses and impact calculations that are essential to management by objectives and results, which was to give them continued political...... by the Government. The political concentration on strategic steering, the concomitant delegation, and management by objectives and results are central components of New Public Management....

  2. IAEA International Database on Irradiated Nuclear Graphite Properties. Summary report of consultants' meeting. 12. meeting of the Technical Steering Committee

    International Nuclear Information System (INIS)

    Chung, H.K.; Wickham, A.J.

    2010-02-01

    The 12th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties was held on 12-13 November 2009 at the IAEA Headquarters, Vienna, Austria. All discussions, recommendations and actions of this Consultants' Meeting are recorded in this report. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database, and make recommendations for action over the next year. This report contains the status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  3. Terrestrial Steering Group. 2014. Arctic Terrestrial Biodiversity Monitoring Plan

    DEFF Research Database (Denmark)

    Aastrup, Peter; Aronsson, Mora; Barry, Tom

    capacity and information may be currently available and (b) to outline near-term required steps to begin implementing the plan and reporting on an initial set of Arctic terrestrial biodiversity focal ecosystem component attributes. The specific objectives of the workshop were to: Identify key products...... for TSG for the next two years. Identify key components of a pan-Arctic status report for priority focal ecosystem components (FEC) attributes for policy and decision makers. Develop a prioritized set of activities to meet reporting objectives. Identify key milestones and timelines for the successful...... implementation of the Arctic Terrestrial Biodiversity Monitoring Plan for the next two years. Identify expert networks required for successful implementation of the plan. Identify key gaps and opportunities for the TSG related to plan implementation and identify near-term next steps to address gaps....

  4. Report of the Long-Range Planning Committee

    International Nuclear Information System (INIS)

    1984-01-01

    This is the final report of the Long-Range Planning Committee of the Lawrence Livermore National Laboratory. It describes the make-up, purpose, working assumptions, and activities of the Committee and discusses the work done by the Committee on defense matters, energy, a number of additional topics, and future long-range planning activities

  5. Design of Phase I Combination Trials: Recommendations of the Clinical Trial Design Task Force of the NCI Investigational Drug Steering Committee

    Science.gov (United States)

    Paller, Channing J.; Bradbury, Penelope A.; Ivy, S. Percy; Seymour, Lesley; LoRusso, Patricia M.; Baker, Laurence; Rubinstein, Larry; Huang, Erich; Collyar, Deborah; Groshen, Susan; Reeves, Steven; Ellis, Lee M.; Sargent, Daniel J.; Rosner, Gary L.; LeBlanc, Michael L.; Ratain, Mark J.

    2014-01-01

    Anticancer drugs are combined in an effort to treat a heterogeneous tumor or to maximize the pharmacodynamic effect. The development of combination regimens, while desirable, poses unique challenges. These include the selection of agents for combination therapy that may lead to improved efficacy while maintaining acceptable toxicity, the design of clinical trials that provide informative results for individual agents and combinations, and logistical and regulatory challenges. The phase 1 trial is often the initial step in the clinical evaluation of a combination regimen. In view of the importance of combination regimens and the challenges associated with developing them, the Clinical Trial Design (CTD) Task Force of the National Cancer Institute (NCI) Investigational Drug Steering Committee developed a set of recommendations for the phase 1 development of a combination regimen. The first two recommendations focus on the scientific rationale and development plans for the combination regimen; subsequent recommendations encompass clinical design aspects. The CTD Task Force recommends that selection of the proposed regimens be based on a biological or pharmacological rationale supported by clinical and/or robust and validated preclinical evidence, and accompanied by a plan for subsequent development of the combination. The design of the phase 1 clinical trial should take into consideration the potential pharmacokinetic and pharmacodynamic interactions as well as overlapping toxicity. Depending on the specific hypothesized interaction, the primary endpoint may be dose optimization, pharmacokinetics, and/or pharmacodynamic (i.e., biomarker). PMID:25125258

  6. Committee Opinion No. 697: Planned Home Birth.

    Science.gov (United States)

    2017-04-01

    In the United States, approximately 35,000 births (0.9%) per year occur in the home. Approximately one fourth of these births are unplanned or unattended. Although the American College of Obstetricians and Gynecologists believes that hospitals and accredited birth centers are the safest settings for birth, each woman has the right to make a medically informed decision about delivery. Importantly, women should be informed that several factors are critical to reducing perinatal mortality rates and achieving favorable home birth outcomes. These factors include the appropriate selection of candidates for home birth; the availability of a certified nurse-midwife, certified midwife or midwife whose education and licensure meet International Confederation of Midwives' Global Standards for Midwifery Education, or physician practicing obstetrics within an integrated and regulated health system; ready access to consultation; and access to safe and timely transport to nearby hospitals. The Committee on Obstetric Practice considers fetal malpresentation, multiple gestation, or prior cesarean delivery to be an absolute contraindication to planned home birth.

  7. Committee Opinion No. 669: Planned Home Birth.

    Science.gov (United States)

    2016-08-01

    In the United States, approximately 35,000 births (0.9%) per year occur in the home. Approximately one fourth of these births are unplanned or unattended. Although the American College of Obstetricians and Gynecologists believes that hospitals and accredited birth centers are the safest settings for birth, each woman has the right to make a medically informed decision about delivery. Importantly, women should be informed that several factors are critical to reducing perinatal mortality rates and achieving favorable home birth outcomes. These factors include the appropriate selection of candidates for home birth; the availability of a certified nurse-midwife, certified midwife or midwife whose education and licensure meet International Confederation of Midwives' Global Standards for Midwifery Education, or physician practicing obstetrics within an integrated and regulated health system; ready access to consultation; and access to safe and timely transport to nearby hospitals. The Committee on Obstetric Practice considers fetal malpresentation, multiple gestation, or prior cesarean delivery to be an absolute contraindication to planned home birth.

  8. Report of International NanoSPD Steering Committee and statistics on recent NanoSPD activities

    International Nuclear Information System (INIS)

    Valiev, R Z; Langdon, T G

    2014-01-01

    Abstract. The Université de Lorraine in Metz, France, is the selected site for the 6th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD6) following a series of five earlier conferences. This introductory paper reports on several major developments in NanoSPD activities as well as on very recent NanoSPD citation data which confirm the continued growth and expansion of this important research area. Close attention is given to the topics of workshops, conferences and seminars organized during these last three years as well as on books and reviews published prior to the NanoSPD6 conference. A special concern of the committee is in introducing and discussing the appropriate terminology to be applied in this new field of materials science and engineering

  9. MDEP Position Paper - PP-STC-01 - MDEP Steering Technical Committee Position Paper on Safety Goals

    International Nuclear Information System (INIS)

    2011-01-01

    In considering the acceptability of a nuclear facility in relation to safety, Governments and regulatory bodies define a range of legal, mandatory requirements which are supplemented by regulatory requirements and expectations which may not have a mandatory nature. The term 'safety goals' is used to cover all health and safety requirements and expectations which must be met: these may be deterministic rules and/or probabilistic targets. They should cover the safety of workers, public and the environment in line with the IAEA's Basic Safety Objective encompassing safety in normal operation through to severe plant states. Although all regulators have safety goals, these are expressed in many different ways and exercises in comparing them frequently are done at a very low level e.g. specific temperature limits in the reactor core. The differences in the requirements from different regulators are difficult to resolve as the goals are derived using different principles and assumptions and are usually for a specific technology. Therefore the Multinational Design Evaluation Programme (MDEP) set up a sub-committee to investigate a different approach. This approach was to start with the high level safety goals and try to derive a structure and means of deriving lower level safety goals that can be seen to be clearly related to the higher level ones. The work will greatly assist in the process of harmonisation of regulatory requirements and enhance coherence and consistency between goals for different technologies. MDEP expects that higher levels of safety will be achieved in the design and operation of new reactors. MDEP strongly supports the structure of safety goals and targets, as set out in this paper, for consideration of its members and IAEA and other organisations, in moving towards international harmonisation of regulatory requirements. MDEP strongly supports the use of integrated decision-making for design evaluation and operational safety. MDEP recognises the need

  10. Summary report of consultants meeting on IAEA International Database on Irradiated Nuclear Graphite Properties. 11. meeting of the Technical Steering Committee

    International Nuclear Information System (INIS)

    Humbert, D.; Wickham, A.J.

    2009-05-01

    The 11th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties was held on 25-26 March 2009 at the IAEA Headquarters, Vienna, Austria. All discussions, recommendations and actions of this Consultants' Meeting are recorded in this report. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database, and make recommendations for action over the next year. This report contains the status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  11. Summary report of consultants' meeting - IAEA International Database on Irradiated Nuclear Graphite Properties. 8th meeting of the Technical Steering Committee

    International Nuclear Information System (INIS)

    Humbert, D.; Wickham, A.J.

    2006-05-01

    The '8th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties' was held on 15-16 March 2006 at the IAEA Headquarters, Vienna, Austria. All discussions, recommendations and actions of this Consultants' Meeting are recorded in this report. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database and make recommendations for actions for the next year. This report contains the current status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  12. External data required timely response by the Trial Steering-Data Monitoring Committee for the NALoxone InVEstigation (N-ALIVE pilot trial

    Directory of Open Access Journals (Sweden)

    Sheila M. Bird

    2017-03-01

    Full Text Available The prison-based N-ALIVE pilot trial had undertaken to notify the Research Ethics Committee and participants if we had reason to believe that the N-ALIVE pilot trial would not proceed to the main trial. In this paper, we describe how external data for the third year of before/after evaluation from Scotland's National Naloxone Programme, a related public health policy, were anticipated by eliciting prior opinion about the Scottish results in the month prior to their release as official statistics. We summarise how deliberations by the N-ALIVE Trial Steering-Data Monitoring Committee (TS-DMC on N-ALIVE's own interim data, together with those on naloxone-on-release (NOR from Scotland, led to the decision to cease randomization in the N-ALIVE pilot trial and recommend to local Principal Investigators that NOR be offered to already-randomized prisoners who had not yet been released.

  13. Two Thematic Units for the Middle School Curriculum: An Initiative by the "Kinder lernen Deutsch" Steering Committee's Writing Team

    Science.gov (United States)

    Busch, Iris; Freimann-Cavanaugh, Corinna; Eichler, Ester

    2009-01-01

    The Kinder lernen Deutsch Committee (KLD) is a standing committee of the AATG that has existed since 1987 and that was originally charged to support the advocacy of German in grades K-8. With generous funding by the Standige Arbeitsgruppe Deutsch als Fremdsprache (StADaF) from the German government and the Goethe-Institut, the Kinder lernen…

  14. Decision and Recommendation of the Steering Committee Concerning the Application of the Paris Convention to Nuclear Installations in the Process of Being Decommissioned

    International Nuclear Information System (INIS)

    2013-01-01

    The NEA Steering Committee for Nuclear Energy adopted the Decision and Recommendation Concerning the Application of the Paris Convention to Nuclear Installations in the Process of Being Decommissioned on 30 October 2014. The purpose of this Decision and Recommendation is to provide updated technical exclusion criteria, replacing the 1990 criteria that were in force. The criteria are relatively conservative, and some nuclear installations in the process of decommissioning will not, at first, be eligible for exclusion. However, at some point during the decommissioning process, the nuclear installation would meet the criteria and could be excluded from the Paris Convention nuclear liability regime, relieving the operator from the obligation to have and maintain the specific, high level nuclear liability insurance coverage. The Decision and Recommendation's Appendix and Explanatory Note are included in the document

  15. 75 FR 23222 - National Poultry Improvement Plan; General Conference Committee Meeting and 40th Biennial Conference

    Science.gov (United States)

    2010-05-03

    ...] National Poultry Improvement Plan; General Conference Committee Meeting and 40th Biennial Conference AGENCY... notice of a meeting of the General Conference Committee of the National Poultry Improvement Plan (NPIP... Coordinator, National Poultry Improvement Plan, VS, APHIS, 1498 Klondike Road, Suite 101, Conyers, GA 30094...

  16. 77 FR 46374 - National Poultry Improvement Plan; General Conference Committee Meeting and 41st Biennial Conference

    Science.gov (United States)

    2012-08-03

    ...] National Poultry Improvement Plan; General Conference Committee Meeting and 41st Biennial Conference AGENCY... notice of a meeting of the General Conference Committee of the National Poultry Improvement Plan (NPIP... CONTACT: Dr. C. Stephen Roney, Senior Coordinator, National Poultry Improvement Plan, VS, APHIS, 1506...

  17. 75 FR 70712 - General Conference Committee of the National Poultry Improvement Plan; Reestablishment

    Science.gov (United States)

    2010-11-18

    ...] General Conference Committee of the National Poultry Improvement Plan; Reestablishment AGENCY: Animal and... Poultry Improvement Plan (Committee) for a 2-year period. The Secretary of Agriculture has determined that.... Rhorer, Senior Coordinator, National Poultry Improvement Plan, VS, APHIS, USDA, Suite 101, 1498 Klondike...

  18. 77 FR 59888 - General Conference Committee of the National Poultry Improvement Plan

    Science.gov (United States)

    2012-10-01

    ... Improvement Plan AGENCY: Animal and Plant Health Inspection Service, USDA. ACTION: Notice of intent to renew... the General Conference Committee of the National Poultry Improvement Plan (Committee) for a 2year... Improvement Plan, VS, APHIS, USDA, 1506 Klondike Road, Suite 300, Conyers, GA 30094; (770) 922-3496...

  19. 76 FR 1592 - National Poultry Improvement Plan; General Conference Committee Meeting

    Science.gov (United States)

    2011-01-11

    ...] National Poultry Improvement Plan; General Conference Committee Meeting AGENCY: Animal and Plant Health... General Conference Committee of the National Poultry Improvement Plan. DATES: The General Conference... Improvement Plan, VS, APHIS, 1498 Klondike Road, Suite 101, Conyers, GA 30094-5104; (770) 922-3496...

  20. 77 FR 1051 - General Conference Committee of the National Poultry Improvement Plan; Meeting

    Science.gov (United States)

    2012-01-09

    ...] General Conference Committee of the National Poultry Improvement Plan; Meeting AGENCY: Animal and Plant... the General Conference Committee of the National Poultry Improvement Plan. DATES: The meeting will be... INFORMATION CONTACT: Dr. C. Stephen Roney, Senior Coordinator, National Poultry Improvement Plan, VS, APHIS...

  1. 77 FR 42257 - General Conference Committee of the National Poultry Improvement Plan; Solicitation for Membership

    Science.gov (United States)

    2012-07-18

    ...] General Conference Committee of the National Poultry Improvement Plan; Solicitation for Membership AGENCY... regional membership for the General Conference Committee of the National Poultry Improvement Plan. DATES... INFORMATION CONTACT: Dr. C. Stephen Roney, Senior Coordinator, National Poultry Improvement Plan, VS, APHIS...

  2. Test Plan for the Wake Steering Experiment at the Scaled Wind Farm Technology (SWiFT) Facility.

    Energy Technology Data Exchange (ETDEWEB)

    Naughton, Brian Thomas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-02-01

    This document is a test plan describing the objectives, configuration, procedures, reporting, roles, and responsibilities for conducting the joint Sandia National Laboratories and National Renewable Energy Laboratory Wake Steering Experiment at the Sandia Scaled Wind Farm Technology (SWiFT) facility near Lubbock, Texas in 2016 and 2017 . The purpose of this document is to ensure the test objectives and procedures are sufficiently detailed such that al l involved personnel are able to contribute to the technical success of the test. This document is not intended to address safety explicitly which is addressed in a separate document listed in the references titled Sandia SWiFT Facility Site Operations Manual . Both documents should be reviewed by all test personnel.

  3. 76 FR 15307 - Notice of Staff Attendance at Southwest Power Pool Strategic Planning Committee Meeting

    Science.gov (United States)

    2011-03-21

    ... Power Pool Strategic Planning Committee Meeting The Federal Energy Regulatory Commission hereby gives notice that members of its staff may attend the meeting of the Southwest Power Pool, Inc. (SPP) Strategic Planning Committee (SPC), as noted below. Their attendance is part of the Commission's ongoing outreach...

  4. Committee Opinion No. 669 Summary: Planned Home Birth.

    Science.gov (United States)

    2016-08-01

    In the United States, approximately 35,000 births (0.9%) per year occur in the home. Approximately one fourth of these births are unplanned or unattended. Although the American College of Obstetricians and Gynecologists believes that hospitals and accredited birth centers are the safest settings for birth, each woman has the right to make a medically informed decision about delivery. Importantly, women should be informed that several factors are critical to reducing perinatal mortality rates and achieving favorable home birth outcomes. These factors include the appropriate selection of candidates for home birth; the availability of a certified nurse-midwife, certified midwife or midwife whose education and licensure meet International Confederation of Midwives' Global Standards for Midwifery Education, or physician practicing obstetrics within an integrated and regulated health system; ready access to consultation; and access to safe and timely transport to nearby hospitals. The Committee on Obstetric Practice considers fetal malpresentation, multiple gestation, or prior cesarean delivery to be an absolute contraindication to planned home birth.

  5. Committee Opinion No 697 Summary: Planned Home Birth.

    Science.gov (United States)

    2017-04-01

    In the United States, approximately 35,000 births (0.9%) per year occur in the home. Approximately one fourth of these births are unplanned or unattended. Although the American College of Obstetricians and Gynecologists believes that hospitals and accredited birth centers are the safest settings for birth, each woman has the right to make a medically informed decision about delivery. Importantly, women should be informed that several factors are critical to reducing perinatal mortality rates and achieving favorable home birth outcomes. These factors include the appropriate selection of candidates for home birth; the availability of a certified nurse-midwife, certified midwife or midwife whose education and licensure meet International Confederation of Midwives' Global Standards for Midwifery Education, or physician practicing obstetrics within an integrated and regulated health system; ready access to consultation; and access to safe and timely transport to nearby hospitals. The Committee on Obstetric Practice considers fetal malpresentation, multiple gestation, or prior cesarean delivery to be an absolute contraindication to planned home birth.

  6. Steering handbook

    CERN Document Server

    Pfeffer, Peter

    2017-01-01

    This edited volume presents basic principles as well as advanced concepts of the computational modeling of steering systems. Moreover, the book includes the components and functionalities of modern steering system, which are presented comprehensively and in a practical way. The book is written by more than 15 leading experts from the automotive industry and its components suppliers. The target audience primarily comprises practicing engineers, developers, researchers as well as graduate students who want to specialize in this field.

  7. SCIENTIFIC PRESENTATIONS of the 11. MEETING OF THE MANAGEMENT STEERING COMMITTEE OF THE RIKEN BNL COLLABORATION (RBRC SCIENTIFIC ARTICLE, VOLUME 11)

    International Nuclear Information System (INIS)

    Samios, N.P.

    2005-01-01

    The RIKEN BNL Research Center (RBRC) was established in April 1997 at Brookhaven National Laboratory. It is funded by the ''Rikagaku Kenkyusho,'' (RIKEN) The Institute of Physical and Chemical Research, of Japan. The Center is dedicated to the study of strong interactions, including hard QCD/spin physics, lattice QCD and RHIC (Relativistic Heavy Ion Collider) physics through nurturing of a new generation of young physicists. The agreement was extended in 2002 for another five year period. This 11th steering group meeting consisted of a series of reports on current activities and future perspectives. Presentation titles and authors included: 'RBRC operations and accomplishments' by Nicholas P. Samios, 'Theoretical physics at RIKEN-BNL Center: strong interactions and QCD' by Larry McLerran, 'RBRC experimental group and Wako base', by Hideto En'yo, 'The QCDOC project overview and status' by Norman H. Christ, 'RHIC spin physics' by Gerry Bunce, 'RHIC heavy ion progam' by Yasuyuki Akiba, 'RIKEN's current status and future plans' by Samuel Aronson, 'Procedure for proposing renewal of the collaboration agreement in 2007' by Chiharu Shimoyamada, and 'New direction of RPRC beyond JFY 2007' by Nicholas P. Samios

  8. Veterinary Immunology Committee Toolkit Workshop 2010: Progress and plans

    Science.gov (United States)

    The Third Veterinary Immunology Committee (VIC) Toolkit Workshop took place at the Ninth International Veterinary Immunology Symposium (IVIS) in Tokyo, Japan on August 18, 2020. The Workshop built on previous Toolkit Workshops and covered various aspects of reagent development, commercialisation an...

  9. Policy elements for post-accident management in the event of nuclear accident. Document drawn up by the Steering Committee for the Management of the Post-Accident Phase of a Nuclear Accident (CODIRPA). Final version - 5 October 2012

    International Nuclear Information System (INIS)

    2012-01-01

    Pursuant to the Inter-ministerial Directive on the Action of the Public Authorities, dated 7 April 2005, in the face of an event triggering a radiological emergency, the National directorate on nuclear safety and radiation protection (DGSNR), which became the Nuclear safety authority (ASN) in 2006, was tasked with working the relevant Ministerial offices in order to set out the framework and outline, prepare and implement the provisions needed to address post-accident situations arising from a nuclear accident. In June 2005, the ASN set up a Steering committee for the management of the post-accident phase in the event of nuclear accident or a radiological emergency situation (CODIRPA), put in charge of drafting the related policy elements. To carry out its work, CODIRPA set up a number of thematic working groups from 2005 on, involving in total several hundred experts from different backgrounds (local information commissions, associations, elected officials, health agencies, expertise agencies, authorities, etc.). The working groups reports have been published by the ASN. Experiments on the policy elements under construction were carried out at the local level in 2010 across three nuclear sites and several of the neighbouring municipalities, as well as during national crisis drills conducted since 2008. These works gave rise to two international conferences organised by ASN in 2007 and 2011. The policy elements prepared by CODIRPA were drafted in regard to nuclear accidents of medium scale causing short-term radioactive release (less than 24 hours) that might occur at French nuclear facilities equipped with a special intervention plan (PPI). They also apply to actions to be carried out in the event of accidents during the transport of radioactive materials. Following definitions of each stage of a nuclear accident, this document lists the principles selected by CODIRPA to support management efforts subsequent to a nuclear accident. Then, it presents the main

  10. Needle path planning and steering in a three-dimensional non-static environment using two-dimensional ultrasound images

    Science.gov (United States)

    Vrooijink, Gustaaf J.; Abayazid, Momen; Patil, Sachin; Alterovitz, Ron; Misra, Sarthak

    2015-01-01

    Needle insertion is commonly performed in minimally invasive medical procedures such as biopsy and radiation cancer treatment. During such procedures, accurate needle tip placement is critical for correct diagnosis or successful treatment. Accurate placement of the needle tip inside tissue is challenging, especially when the target moves and anatomical obstacles must be avoided. We develop a needle steering system capable of autonomously and accurately guiding a steerable needle using two-dimensional (2D) ultrasound images. The needle is steered to a moving target while avoiding moving obstacles in a three-dimensional (3D) non-static environment. Using a 2D ultrasound imaging device, our system accurately tracks the needle tip motion in 3D space in order to estimate the tip pose. The needle tip pose is used by a rapidly exploring random tree-based motion planner to compute a feasible needle path to the target. The motion planner is sufficiently fast such that replanning can be performed repeatedly in a closed-loop manner. This enables the system to correct for perturbations in needle motion, and movement in obstacle and target locations. Our needle steering experiments in a soft-tissue phantom achieves maximum targeting errors of 0.86 ± 0.35 mm (without obstacles) and 2.16 ± 0.88 mm (with a moving obstacle). PMID:26279600

  11. 78 FR 33799 - National Poultry Improvement Plan; General Conference Committee Meeting

    Science.gov (United States)

    2013-06-05

    ... Washington, DC, this 3rd day of June 2013. Kevin Shea, Acting Administrator, Animal and Plant Health... DEPARTMENT OF AGRICULTURE Animal and Plant Health Inspection Service [Docket No. APHIS-2013-0032] National Poultry Improvement Plan; General Conference Committee Meeting AGENCY: Animal and Plant Health...

  12. Steering straight

    Energy Technology Data Exchange (ETDEWEB)

    Louie, Jacqueline

    2011-12-15

    Baker Hughes Inc. has developed a deep azimuthal resistivity measurement tool for subsurface navigation when drilling oil and gas wells. This tool, named AziTrak, has measurement-while-drilling and logging-while-drilling capabilities and data are sent in real time to the surface via mud pulse or wired pipe telemetry. This technology helps the operator detect and visualize bed boundaries in real time, thanks to 3D imagery and a 360 degree view of the subsurface. The AziTrak system makes it possible to steer proactively and to stay within the pay zone at all times to maximize production; the tool had excellent results in field applications. Although this tool is 5 times more expensive than conventional technologies, its use results in a more economic wellbore thanks to its great utility. If the operator puts a high degree of involvement into it, the AziTrak deep azimuthal resistivity measurement tool will allow him to stay in the pay zone at all times.

  13. Committees

    Science.gov (United States)

    2012-11-01

    Leadership Team of the IAHR Committee for Hydraulic Machinery and Systems Eduard EGUSQUIZA, UPC Barcelona, Spain, Chair François AVELLAN, EPFL-LMH, Switzerland, Past Chair Richard K FISHER, Voith Hydro Inc., USA, Past Chair Fidel ARZOLA, Edelca, Venezuela Michel COUSTON, Alstom Hydro, France Niklas DAHLBÄCKCK, Vatenfall, Sweden Normand DESY, Andritz VA TECH Hydro Ltd., Canada Chisachi KATO, University of Tokyo, Japan Andrei LIPEJ, Turboinstitut, Slovenija Torbjørn NIELSEN, NTNU, Norway Romeo SUSAN-RESIGA, 'Politehnica' University Timisoara, Romania Stefan RIEDELBAUCH, Stuggart University, Germany Albert RUPRECHT, Stuttgart University, Germany Qing-Hua SHI, Dong Fang Electrical Machinery Co., China Geraldo TIAGO, Universidade Federal de Itajubá, Brazil International Advisory Committee Shouqi YUAN (principal) Jiangsu University China QingHua SHI (principal) Dong Fang Electrical Machinery Co. China Fidel ARZOLA EDELCA Venezuela Thomas ASCHENBRENNER Voith Hydro GmbH & Co. KG Germany Anton BERGANT Litostroj Power doo Slovenia B C BHAOYAL Research & Technology Centre India Hermod BREKKE NTNU Norway Stuart COULSON Voith Hydro Inc. USA Paul COOPER Fluid Machinery Research Inc USA V A DEMIANOV Power Machines OJSC Russia Bart van ESCH Technische Universiteit Eindhoven Netherland Arno GEHRER Andritz Hydro Graz Austria Akira GOTO Ebara Corporation Japan Adiel GUINZBURG The Boeing Company USA D-H HELLMANN KSB AG Germany Ashvin HOSANGADI Combustion Research and Flow Technology USA Byung-Sun HWANG Korea Institute of Material Science Korea Toshiaki KANEMOTO Kyushu Institute of Technology Japan Mann-Eung KIM Korean Register of Shipping Korea Jiri KOUTNIK Voith Hydro GmbH & Co. KG Germany Jinkook LEE Eaton Corporation USA Young-Ho LEE Korea Maritime University Korea Woo-Seop LIM Hyosung Goodsprings Inc Korea Jun MATSUI Yokohama National University Japan Kazuyoshi Mitsubishi H I Ltd, Japan MIYAGAWA Christophe NICOLET Power Vision Engineering Srl Switzerland Maryse PAGE Hydro

  14. A Plan to Close the Achievement Gap for African American Students. Final Report. Submitted by the HB2722 Advisory Committee

    Science.gov (United States)

    Washington Office of Superintendent of Public Instruction, 2008

    2008-01-01

    In 2008, the Washington State Legislature passed HB 2722, which called for the appointment of an Advisory Committee charged with creating a plan--which, when fully implemented, will close the education gap for African American students. Beginning in May 2008, the newly appointed HB 2722 Advisory Committee took on this challenging charge. Early in…

  15. Action plan in response to March 1981 report to NFPQT Committee

    International Nuclear Information System (INIS)

    1981-03-01

    This plan of action has been prepared at the direction of the Acting Under Secretary in response to the report of the Nuclear Facilities Personnel Qualifications and Training (NFPQT) Committee on A Safety Assessment of Department of Energy Nuclear Reactors. Senior Department officials with Headquarters responsibilities for the safety of nuclear facilities owned by and operated for the Department have developed this plan with input from the operations office managers having operational responsibility for such facilities. A summary of the plan's objectives and a cross-reference to the findings of the NFPQT Committee Report is attached to the plan. Appendix A contains implementing actions and Appendix B contains a summary of actions responsive to lessons learned from the TMI accident that have been completed or are well underway. Although the plan is written in definitive language, the specific actions (such as organization realignments and proposals) will be subject to appropriate review and approval. Also, other adjustments may be required as the actions are implemented

  16. Capital District Transportation Committee Albany, New York : planning the congestion management process in the context of metropolitan transportation planning goals and objectives

    Science.gov (United States)

    2009-04-01

    The Capital District Transportation Committee (CDTC) uses a broad and integrated approach for transportation planning in the Albany-Schenectady-Troy (New York) metropolitan area. This approach encompasses issues critical to the future of the Capital ...

  17. Report of the renewable energy sector Committee. National steering committee of the region and sector mobilization plan for the development of green growth professions 2009

    International Nuclear Information System (INIS)

    2009-01-01

    After a presentation of the renewable energy sector, this report identifies the development or transformation of professions within this sector, and assesses its recruitment needs. It also identifies the associated needs in terms of education and of professional course organization. It indicates the various organizations and institutions involved in matching employment offer and demand. It discusses how to valorise the main professions and education courses. Recommendations are formulated to develop knowledge, to communicate, to educate all students in building construction and architecture, to promote architecture quality in individual housing, to educate both theoretically and practically, to match offer and demand, to propose appropriate remunerations, to educate teachers, and so on

  18. Committee on the safety of nuclear installations - Operating plan (2006 - 2009)

    International Nuclear Information System (INIS)

    2007-01-01

    In 2004, NEA issued its Strategic Plan covering the period 2005-2009, addressing the NEA activities associated with nuclear safety and regulation. Committee on the Safety of Nuclear Installations (CSNI) and Committee on Nuclear Regulatory Activities (CNRA), which have the primary responsibility for activities in this area, have developed and issued a joint strategic plan covering this same time period. As requested in the Joint Strategic Plan, each committee is to prepare an operating plan which describes in more detail the committee's organisation, planned activities, priorities and operating procedures to be used to implement the Joint Strategic Plan. In effect, the Joint Strategic Plan defines what type of work CSNI should do, whereas the Operating Plan describes the overall work scope and how to accomplish it to meet the joint CSNI/CNRA Strategic Plan objectives and mission. The present Operating Plan follows and takes into account the outcome of a CSNI assessment group, which has evaluated the CSNI activities. The assessment group expressed appreciation for the CSNI role and activity, while making recommendations with regards to scope of work and way to operate in order to further improve efficiency. The main objectives of CSNI are to: - Keep all member countries involved in and abreast of developments in safety technology. - Review operating experience with the objective to identify safety issues that need to be addressed by new research. - Review the state-of-knowledge on selected topics of nuclear safety technology and safety assessment. - Promote training and research projects that serve to maintain competence in nuclear safety matters. - Promote research as needed to reach consensus on nuclear safety issues of common interest. - Consider the safety implications of scientific and technical developments. To accomplish these objectives, CSNI is organised into six permanent working groups (as described in Section II), each covering a different set of

  19. Wireless traffic steering for green cellular networks

    CERN Document Server

    Zhang, Shan; Zhou, Sheng; Niu, Zhisheng; Shen, Xuemin (Sherman)

    2016-01-01

    This book introduces wireless traffic steering as a paradigm to realize green communication in multi-tier heterogeneous cellular networks. By matching network resources and dynamic mobile traffic demand, traffic steering helps to reduce on-grid power consumption with on-demand services provided. This book reviews existing solutions from the perspectives of energy consumption reduction and renewable energy harvesting. Specifically, it explains how traffic steering can improve energy efficiency through intelligent traffic-resource matching. Several promising traffic steering approaches for dynamic network planning and renewable energy demand-supply balancing are discussed. This book presents an energy-aware traffic steering method for networks with energy harvesting, which optimizes the traffic allocated to each cell based on the renewable energy status. Renewable energy demand-supply balancing is a key factor in energy dynamics, aimed at enhancing renewable energy sustainability to reduce on-grid energy consum...

  20. AGU Committees

    Science.gov (United States)

    Administrative Committees are responsible for those functions required for the overall performance or well-being of AGU as an organization. These committees are Audit and Legal Affairs, Budget and Finance*, Development, Nominations*, Planning, Statutes and Bylaws*, Tellers.Operating Committees are responsible for the policy direction and operational oversight of AGU's primary programs. The Operating Committees are Education and Human Resources, Fellows*, Information Technology, International Participation*, Meetings, Public Affairs, Public Information, Publications*.

  1. Steering smog prediction

    NARCIS (Netherlands)

    R. van Liere (Robert); J.J. van Wijk (Jack)

    1997-01-01

    textabstractThe use of computational steering for smog prediction is described. This application is representative for many underlying issues found in steering high performance applications: high computing times, large data sets, and many different input parameters. After a short description of the

  2. Steering and evasion assist

    NARCIS (Netherlands)

    Dang, T.; Desens, J.; Franke, U.; Gavrila, D.; Schäfers, L.; Ziegler, W.; Eskandarian, A.

    2012-01-01

    Steering and evasion assistance defines a new and future class of driver assistance systems to avoid an impending collision with other traffic participants. Dynamic and kinematic considerations reveal that an evasive steering maneuver has high potential for collision avoidance in many driving

  3. Experimental temporal quantum steering

    Czech Academy of Sciences Publication Activity Database

    Bartkiewicz, K.; Černoch, Antonín; Lemr, K.; Miranowicz, A.; Nori, F.

    2016-01-01

    Roč. 6, Nov (2016), 1-8, č. článku 38076. ISSN 2045-2322 R&D Projects: GA ČR GAP205/12/0382 Institutional support: RVO:68378271 Keywords : temporal quantum steering * EPR steering Subject RIV: BH - Optics, Masers, Lasers Impact factor: 4.259, year: 2016

  4. Fermilab Steering Group Report

    Energy Technology Data Exchange (ETDEWEB)

    Beier, Eugene; /Pennsylvania U.; Butler, Joel; /Fermilab; Dawson, Sally; /Brookhaven; Edwards, Helen; /Fermilab; Himel, Thomas; /SLAC; Holmes, Stephen; /Fermilab; Kim, Young-Kee; /Fermilab /Chicago U.; Lankford, Andrew; /UC, Irvine; McGinnis, David; /Fermilab; Nagaitsev, Sergei; /Fermilab; Raubenheimer, Tor; /SLAC /Fermilab

    2007-01-01

    The Fermilab Steering Group has developed a plan to keep U.S. accelerator-based particle physics on the pathway to discovery, both at the Terascale with the LHC and the ILC and in the domain of neutrinos and precision physics with a high-intensity accelerator. The plan puts discovering Terascale physics with the LHC and the ILC as Fermilab's highest priority. While supporting ILC development, the plan creates opportunities for exciting science at the intensity frontier. If the ILC remains near the Global Design Effort's technically driven timeline, Fermilab would continue neutrino science with the NOVA experiment, using the NuMI (Neutrinos at the Main Injector) proton plan, scheduled to begin operating in 2011. If ILC construction must wait somewhat longer, Fermilab's plan proposes SNuMI, an upgrade of NuMI to create a more powerful neutrino beam. If the ILC start is postponed significantly, a central feature of the proposed Fermilab plan calls for building an intense proton facility, Project X, consisting of a linear accelerator with the currently planned characteristics of the ILC combined with Fermilab's existing Recycler Ring and the Main Injector accelerator. The major component of Project X is the linac. Cryomodules, radio-frequency distribution, cryogenics and instrumentation for the linac are the same as or similar to those used in the ILC at a scale of about one percent of a full ILC linac. Project X's intense proton beams would open a path to discovery in neutrino science and in precision physics with charged leptons and quarks. World-leading experiments would allow physicists to address key questions of the Quantum Universe: How did the universe come to be? Are there undiscovered principles of nature: new symmetries, new physical laws? Do all the particles and forces become one? What happened to the antimatter? Building Project X's ILC-like linac would offer substantial support for ILC development by accelerating the

  5. The strategic plan for the Committee on the Safety of Nuclear Installations

    International Nuclear Information System (INIS)

    2000-01-01

    Following the request from the NEA that all the committees should develop Strategic Plans and the report of the Effectiveness Review Group (ERG) on the effectiveness of CSNI's activities, CSNI created a Strategic Planning Group to review their working processes. In developing a five year rolling Strategic Plan, the Group has considered the need for more top-down direction by CSNI, stricter control on time limited Task Groups and improved communications including timely review and publication of reports. The Strategic Planning Group, after reviewing the current work structure of CSNI and the current technical issues as laid out in the SESAR series of reports and the CNRA report on Regulatory Effectiveness, have made the following recommendations. The basic elements of the CSNI will continue to be the Principal Working Groups, which will be known in future simply as Working Groups. The number of Working Groups and their areas of expertise will be reviewed periodically when the strategic plan undergoes a review. It is recommended that this Plan be reviewed every five years. In order to provide better top-down direction by the CSNI, it is recommended that a small Programme Review Group (PRG) be created. The PRG will assist the CSNI Bureau to review proposals from the Working Groups, and enable the review of major reports to ensure high quality. To ensure timely management of projects and reviews of proposals and reports it is recommended that CSNI have a second full meeting in early summer. It is recommended that Special Expert Groups (SEGs) be created reporting directly to CSNI. These Groups would deal with issues that cut across the disciplines of more than one Working Group and be assigned clear time-limited mandates. The creation of SEGs on Fuel Safety Margins and on Human and Organisational Factors is proposed at this time. Restructuring of the five Principal Working Groups into four Working Groups is recommended. This would be accomplished by merging the former

  6. Vehicle steering by side stick: optimising steering characteristics

    NARCIS (Netherlands)

    Zuurbier, J.; Hogema, J.H.; Brekelmans, J.A.W.J.

    2000-01-01

    This paper describes a study that was conducted to investigate the possibilities for optimizing task performance when driving a side stick-steered vehicle. Using steer-by-wire technology, a conventional steering system was mimicked, thus yielding the possibility to modify the steering

  7. A RESEARCH REPORT ON OPERATIONAL PLANS FOR DEVELOPING REGIONAL EDUCATIONAL MEDIA RESEARCH CENTERS.

    Science.gov (United States)

    CARPENTER, C.R.; AND OTHERS

    THE NEED AND FEASIBILITY OF ESTABLISHING A NUMBER OF "REGIONAL EDUCATIONAL MEDIA RESEARCH CENTERS WITH A PROGRAMMATIC ORIENTATION" WERE INVESTIGATED. A PLANNING GROUP WAS ESTABLISHED TO SERVE AS A STEERING COMMITTEE. CONFERENCES IN WHICH GROUPS IN RESEARCH AND EDUCATION IN WIDELY DISTRIBUTED REGIONS OF THE COUNTRY PARTICIPATED WERE HELD…

  8. The Madison Plan: A New Approach to System-Wide Testing. The Nucleus Testing Committee.

    Science.gov (United States)

    Cleary, T. Anne; Mathews, Walter M.

    Steps in the development of a Nucleus Testing Committee to assist in the development of a system-wide testing program in the Madison, Wisconsin, school system are described. Over 60 participants were selected for the committee, using the following selection guidelines: interest in the project and the role to be assumed, commitment to the school…

  9. Regional State Committees Can Help Provide a Regional Perspective to Planning and Siting Decisions, Reducing the Need for Federal Preemption

    Energy Technology Data Exchange (ETDEWEB)

    Basheda, Gregory

    2006-03-01

    The Energy Policy Act of 2005 gave FERC the authority to preempt state and local transmission siting authorities under certain conditions, creating the potential for federal/state disputes. Such disputes are less likely to occur where there are open, regional planning processes. Multi-state advisory bodies known as regional state committees, working with RTOs, can provide a forum to evaluate transmission needs from a regional perspective, reducing the need for FERC involvement. (author)

  10. One-way EPR steering and genuine multipartite EPR steering

    Science.gov (United States)

    He, Qiongyi; Reid, Margaret D.

    2012-11-01

    We propose criteria and experimental strategies to realise the Einstein-Podolsky-Rosen (EPR) steering nonlocality. One-way steering can be obtained where there is asymmetry of thermal noise on each system. We also present EPR steering inequalities that act as signatures and suggest how to optimise EPR correlations in specific schemes so that the genuine multipartite EPR steering nonlocality (EPR paradox) can also possibly be realised. The results presented here also apply to the spatially separated macroscopic atomic ensembles.

  11. Methodologies for steering clocks

    Science.gov (United States)

    Chadsey, Harold

    1995-01-01

    One of the concerns of the PTTI community is the coordination of one time scale with another. This is accomplished through steering one clock system to another, with a goal of a zero or constant offset in time and frequency. In order to attain this goal, rate differences are calculated and allowed for by the steering algorithm. This paper will present several of these different methods of determining rate differences. Ideally, any change in rate should not cause the offset to change sign (overshoot) by any amount, but certainly not by as much as its previous absolute value. The advantages and disadvantages of each depend on the user's situation.

  12. Steering Your Mysterious Mind

    DEFF Research Database (Denmark)

    Prasad, Ramjee

    Steering the Mysterious Mind, describes a unique, novel concept for a way to gain control of your mind. The five basic elements of human life, that is; Creativity, Content­ment, Confidence, Calmness, and Concentration (C5) have been introduced in my previous book Unlock Your Personalization. Posi....... Compare it with going to the gym where you work on the physical body. In the same way as with arms and legs, the mind is a mus­cle which you exercise through C5 practice. Steering the mind on your personal goal will help you to be creative....

  13. The coming revolution in particle physics: Report of the Fermilab Long Range Planning Committee

    Energy Technology Data Exchange (ETDEWEB)

    Jeff Appel et al.

    2004-06-22

    In early 2003, the Fermilab Director formed a committee (Appendix A) to examine options for the long-range future of Fermilab. Specifically, the committee was asked to respond to a charge (Appendix B), which laid out the assumptions, which were to underlie our discussions. The committee met a few times during the spring of 2003 and formulated a plan of action. It identified a number of issues that deserved attention, and a subcommittee was formed to focus on each. We agreed that in addressing these key issues, a broader participation was appropriate. The manner in which that was achieved varied from subcommittee to subcommittee to group. In some cases the expanded membership participated in all the discussions, in others, particular presentations were solicited and heard. Some subgroups met regularly over several months, others convened only for a small number of discussions. We have attempted to list participants in Appendix C. General presentations indicating the purpose of the work were given, for example at the Fermilab Users Annual Meeting. Towards the end of the summer some sense of direction developed and a series of open meetings was organized by the different subgroups. These meetings of two and more hour's duration gave the broader laboratory and user community a further chance to react to perceived directions and to make their opinions known. They were extremely well attended. In all, nearly 100 people have participated in the process including the development of initial drafts and proto-recommendations. A larger number attended the various open sessions. It is therefore likely, even expected, that the general thrusts of this report are no surprise. Nevertheless, the committee met in a number of plenary closed sessions including a two-day retreat in which all the issues were discussed and a common view was developed. The Director and Deputy Director heard and interacted with the discussions in most of these meetings. In attempting to converge, we

  14. 49 CFR 570.7 - Steering systems.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Steering systems. 570.7 Section 570.7... Pounds or Less § 570.7 Steering systems. (a) System play. Lash or free play in the steering system shall... in the steering system. Table 1—Steering System Free Play Values Steering wheel diameter (inches...

  15. Planning Committee for a National Resource for Computation in Chemistry. Final report, October 1, 1974--June 30, 1977

    International Nuclear Information System (INIS)

    1978-11-01

    The Planning Committee for a National Resource for Computation in Chemistry (NRCC) was charged with the responsibility of formulating recommendations regarding organizational structure for an NRCC including the composition, size, and responsibilities of its policy board, the relationship of such a board to the operating structure of the NRCC, to federal funding agencies, and to user groups; desirable priorities, growth rates, and levels of operations for the first several years; and facilities, access and site requirements for such a Resource. By means of site visits, questionnaires, and a workshop, the Committee sought advice from a wide range of potential users and organizations interested in chemical computation. Chemical kinetics, crystallography, macromolecular science, nonnumerical methods, physical organic chemistry, quantum chemistry, and statistical mechanics are covered

  16. Planning Committee for a National Resource for Computation in Chemistry. Final report, October 1, 1974--June 30, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Bigeleisen, Jacob; Berne, Bruce J.; Coton, F. Albert; Scheraga, Harold A.; Simmons, Howard E.; Snyder, Lawrence C.; Wiberg, Kenneth B.; Wipke, W. Todd

    1978-11-01

    The Planning Committee for a National Resource for Computation in Chemistry (NRCC) was charged with the responsibility of formulating recommendations regarding organizational structure for an NRCC including the composition, size, and responsibilities of its policy board, the relationship of such a board to the operating structure of the NRCC, to federal funding agencies, and to user groups; desirable priorities, growth rates, and levels of operations for the first several years; and facilities, access and site requirements for such a Resource. By means of site visits, questionnaires, and a workshop, the Committee sought advice from a wide range of potential users and organizations interested in chemical computation. Chemical kinetics, crystallography, macromolecular science, nonnumerical methods, physical organic chemistry, quantum chemistry, and statistical mechanics are covered.

  17. Decision and Recommendation Concerning the Application of the Paris Convention on Third Party Liability in the Field of Nuclear Energy to Nuclear Installations for the Disposal of Certain Types of Low-level Radioactive Waste (This Decision and Recommendation was adopted at the 133. Session of the Steering Committee for Nuclear Energy held on 3-4 November 2016.)

    International Nuclear Information System (INIS)

    2017-01-01

    The steering committee, having regard to the Convention on Third Party Liability in the Field of Nuclear Energy of 29 July 1960, as amended by the Additional Protocol of 28 January 1964, by the Protocol of 16 November 1982 and by the Protocol of 12 February 2004, and in particular Article 1(b) thereof; Considering that, by virtue of that Article, the Steering Committee may, if in its view the small extent of the risks involved so warrants, exclude any nuclear installation, nuclear fuel or nuclear substances from the application of the Paris Convention; having regard to Article 8(b) and Article 10(b) of the Statute of the OECD Nuclear Energy Agency; considering that nuclear installations for the disposal of low-level radioactive waste are covered by the provisions of the Paris Convention; considering that it should be made possible for Contracting Parties to cease the application of the Paris Convention to a nuclear installation for the disposal of certain types of low-level radioactive waste where the risks involved are so limited; noting the attached Explanatory Note; decides that any Contracting Party may cease to apply the Paris Convention to a nuclear installation for the disposal of low-level radioactive waste, provided that the provisions set out in the Appendix to this Decision and Recommendation and any additional conditions which the Contracting Party may judge appropriate to establish are met; recommends that the Contracting Parties which make use of this option notify the other Contracting Parties, as well as the Nuclear Energy Agency; and recommends that the Nuclear Energy Agency, as appropriate, analyses periodically the experience gained by the Contracting Parties which use this option and reports back to all the Contracting Parties. (authors)

  18. Computer network environment planning and analysis

    Science.gov (United States)

    Dalphin, John F.

    1989-01-01

    The GSFC Computer Network Environment provides a broadband RF cable between campus buildings and ethernet spines in buildings for the interlinking of Local Area Networks (LANs). This system provides terminal and computer linkage among host and user systems thereby providing E-mail services, file exchange capability, and certain distributed computing opportunities. The Environment is designed to be transparent and supports multiple protocols. Networking at Goddard has a short history and has been under coordinated control of a Network Steering Committee for slightly more than two years; network growth has been rapid with more than 1500 nodes currently addressed and greater expansion expected. A new RF cable system with a different topology is being installed during summer 1989; consideration of a fiber optics system for the future will begin soon. Summmer study was directed toward Network Steering Committee operation and planning plus consideration of Center Network Environment analysis and modeling. Biweekly Steering Committee meetings were attended to learn the background of the network and the concerns of those managing it. Suggestions for historical data gathering have been made to support future planning and modeling. Data Systems Dynamic Simulator, a simulation package developed at NASA and maintained at GSFC was studied as a possible modeling tool for the network environment. A modeling concept based on a hierarchical model was hypothesized for further development. Such a model would allow input of newly updated parameters and would provide an estimation of the behavior of the network.

  19. 11 CFR 116.7 - Debt settlement plans filed by terminating committees; Commission review.

    Science.gov (United States)

    2010-01-01

    ... description of the terms under which the creditor has extended credit to nonpolitical debtors of similar risk... settlement plan after the creditors included in the debt settlement plan have agreed to the settlement or... payments to the creditors included in the debt settlement plan until completion of Commission review. The...

  20. Steering Maps and Their Application to Dimension-Bounded Steering

    Science.gov (United States)

    Moroder, Tobias; Gittsovich, Oleg; Huber, Marcus; Uola, Roope; Gühne, Otfried

    2016-03-01

    The existence of quantum correlations that allow one party to steer the quantum state of another party is a counterintuitive quantum effect that was described at the beginning of the past century. Steering occurs if entanglement can be proven even though the description of the measurements on one party is not known, while the other side is characterized. We introduce the concept of steering maps, which allow us to unlock sophisticated techniques that were developed in regular entanglement detection and to use them for certifying steerability. As an application, we show that this allows us to go beyond even the canonical steering scenario; it enables a generalized dimension-bounded steering where one only assumes the Hilbert space dimension on the characterized side, with no description of the measurements. Surprisingly, this does not weaken the detection strength of very symmetric scenarios that have recently been carried out in experiments.

  1. Planning for the Mercy Center for Breast Health.

    Science.gov (United States)

    Olivares, V Ed

    2002-01-01

    During the last months of 2000, administrators at the Mercy San Juan Medical Center in Carmichael, Calif., convened a steering committee to plan the Mercy Center for Breast Health. The Steering Committee was composed of the director of ancillary and support services, the oncology clinical nurse specialist, the RN manager of the oncology nursing unit, the RN surgery center manager, and me, the manager of imaging services. The committee was responsible for creating a new business with five specific objectives: to position the Center as a comprehensive diagnostic and resource center for women; to generate physician referrals to the Breast Center through various vehicles; to create awareness of the Breast Center's capabilities among area radiologists; to create awareness of the Breast Center among employees of six sister facilities; to create "brand awareness" for the Mercy Center for Breast Health among referring physicians and patients who could use competing centers in the area. The Steering Committee's charter was to design a center with a feminine touch and ambience and to provide a "one-stop shopping" experience for patients. A major component of the Breast Center is the Dianne Haselwood Resource Center, which provides patients with educational support and information. The Steering Committee brought its diverse experience and interests to bear on arranging for equipment acquisition, information and clerical systems, staffing, clinic office design, patient care and marketing. Planning the Mercy Center for Breast Health has been a positive challenge that brought together many elements of the organization and people from different departments and specialties to create a new business venture. Our charge now is to grow and to live up to our vision of offering complete breast diagnostic, education and support services in one location.

  2. Evaluation and review of planning for greater-confinement disposal by the Independent Peer Review Committee, July 9-10, 1985. Final report

    International Nuclear Information System (INIS)

    1985-07-01

    This evaluation and review was performed under contract by Argonne National Laboratory in support of their role for developing the ''Planning for Greater Confinement Disposal'' Document for the Low-Level Waste Management Program Office for the Department of Energy, Office of Defense Waste and Byproducts Management. The Independent Peer Review Committee was composed of 13 well-qualified and recognized experts in their fields and pertinent disciplines, collectively representing considerable expertise and experience in waste disposal operations, waste management, environmental assessment and impact analysis, and other aspects of radioactive waste disposal. The members of the Peer Review Committee, their organizations, and thier area of expertise are given in Appendix 1. The general consensus of the Independent Review Committee was that the ''Planning for Greater-Confinement Disposal'' document was reasonably comprehensive, covering nearly all topics necessary to provide a good planning guide. There is, however, a definite need to reorganize the document into two volumes with appendices and the relationship of the GCD document to other LLWMP documents needs to be clarified in the introductory volume. Specific recommendations made by the committee on the DCD document are given in Section 3.2. Recommendations by the committee that have a somewhat broader scope than just the GCD document are given in Section 3.3

  3. Decision on the Exclusion of Small Quantities of Nuclear Substances outside a Nuclear Installation from the Application of the Convention on Third Party Liability in the Field of Nuclear Energy (This Decision was adopted at the 133. Session of the Steering Committee for Nuclear Energy held on 3-4 November 2016.)

    International Nuclear Information System (INIS)

    2017-01-01

    The steering committee, having regard to the Convention on Third Party Liability in the Field of Nuclear Energy of 29 July 1960, as amended by the Additional Protocol of 28 January 1964, by the Protocol of 16 November 1982 and by the Protocol of 12 February 2004, and, in particular, Article 1(b) thereof; considering that, by virtue of that Article, the Steering Committee may, if in its view the small extent of the risks involved so warrants, exclude any nuclear installation, nuclear fuel or nuclear substances from the application of the Paris Convention; considering that nuclear substances in transport or use outside a nuclear installation, within defined limits and under specifically prescribed conditions during transport, should, in view of the small extent of the risks involved, be excluded from the application of the Paris Convention; having regard to its Decision of 18 October 2007 on the Exclusion of Small Quantities of Nuclear Substances outside a Nuclear Installation from the Application of the Convention on Third Party Liability in the Field of Nuclear Energy of 29 July 1960 as amended; considering that the 2005 Edition of the Regulations for the Safe Transport of Radioactive Material of the International Atomic Energy Agency referred to in the Annex to the above-mentioned Decision, has been replaced by revised editions, the most recent of which is the 2012 Edition, which is used as the basis for corresponding national and international regulations in this field; considering the need for a decision the annex of which is in line with the 2012 Edition of those Regulations; decides: 1. Nuclear substances which are consigned by an operator to a recipient for use shall be excluded from the application of the Paris Convention for the period during which they are outside a nuclear installation provided that the consignment, when leaving a nuclear installation, complies with the provisions set forth in the Annex to this Decision and with other relevant

  4. Operational forest management planning methods: proceedings, meeting of steering systems project group, International Union of Forestry Research Organizations, Bucharest, Romania, June 18-24, 1978

    Science.gov (United States)

    Daniel Navon

    1978-01-01

    These 14 papers were submitted to a conference of Project Group P4.07 Division IV, International Union of Forestry Research Organizations. Topics discussed included the uses of simulations, analytical techniques, and mathematical programming techniques in land management planning, reforestation programs, intensive forestry, timber management and production, tree growth...

  5. Health insurance: how does your plan compare? Plus, a look to new reforms.

    Science.gov (United States)

    2012-11-01

    A good insurance plan can steer you to the care that helps and away from wasting your time and money on unnecessary tests and treatments. For the third year running, we are presenting health plan rankings from the National Committee for Quality Assurance (NCQA), a nonprofit health care accreditation and quality measurement group, of a record 984 plans on their quality of care, customer satisfaction, and commitment to improvement and disclosure of information. This year, the NCQA ranked 474 private plans (which consumers obtain through a job or purchase on their own), 395 Medicare Advantage plans, and 115 Medicaid HMOs.

  6. STEER Coastal Use Mapping Project

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Coastal Use Mapping Project is designed to collect critical information on human activities in and near the St. Thomas East End Reserves (STEER). The project...

  7. Holographic memory using beam steering

    Science.gov (United States)

    Chao, Tien-Hsin (Inventor); Hanan, Jay C. (Inventor); Reyes, George F. (Inventor); Zhou, Hanying (Inventor)

    2006-01-01

    A method, apparatus, and system provide the ability for storing holograms at high speed. A single laser diode emits a collimated laser beam to both write to and read from a photorefractice crystal. One or more liquid crystal beam steering spatial light modulators (BSSLMs) or Micro-Electro-Mechanical Systems (MEMS) mirrors steer a reference beam, split from the collimated laser beam, at high speed to the photorefractive crystal.

  8. Report on the behalf of the Finance, General Economy and Budgetary Control Commission on the Finance bill for 2011 (n. 2824), appendix N. 13: ecology, sustainable development and land planning, hazard prevention, management and steering of ecology, energy, sustainable development, land planning and sea policies

    International Nuclear Information System (INIS)

    2010-01-01

    This report comments the grants awarded to two programmes, the first one concerning the prevention of hazards, and the second concerning the management and steering of ecology, energy, sustainable development, land planning and sea policies. These two programmes are emblematic of the French government's action and ambition in the field of sustainable development and ecology. For the first one, the report comments the evolution of grants, their objectives and performance indicators. Then it addresses its various aspects: prevention of technological hazards and pollutions, prevention of natural and hydraulic hazards, nuclear safety, after-mine management. For the second programme, the report gives an assessment of the ministry reorganization, and comments the means requested for 2011

  9. Bulling among yearling feedlot steers.

    Science.gov (United States)

    Pierson, R E; Jensen, R; Braddy, P M; Horton, D P; Christie, R M

    1976-09-01

    In a survey to determine the cause of illness and deaths among yearling feedlot cattle, bulling was found to be one of the major problems. During the years 1971-1974, 54,913 (2.88%) steers became bullers and represented an annual loss of around +325,000. Some of the causes of bulling were found to be hormones, either as implants or in the feed. In 1974, from 1,988 necropsies, it was determined that 83 steers died from riding injuries.

  10. Driver steering model for closed-loop steering function analysis

    Science.gov (United States)

    Bolia, Pratiksh; Weiskircher, Thomas; Müller, Steffen

    2014-05-01

    In this paper, a two level preview driver steering control model for the use in numerical vehicle dynamics simulation is introduced. The proposed model is composed of cascaded control loops: The outer loop is the path following layer based on potential field framework. The inner loop tries to capture the driver's physical behaviour. The proposed driver model allows easy implementation of different driving situations to simulate a wide range of different driver types, moods and vehicle types. The expediency of the proposed driver model is shown with the help of developed driver steering assist (DSA) function integrated with a conventional series production (Electric Power steering System with rack assist servo unit) system. With the help of the DSA assist function, the driver is prevented from over saturating the front tyre forces and loss of stability and controllability during cornering. The simulation results show different driver reactions caused by the change in the parameters or properties of the proposed driver model if the DSA assist function is activated. Thus, the proposed driver model is useful for the advanced driver steering and vehicle stability assist function evaluation in the early stage of vehicle dynamics handling and stability evaluation.

  11. Steering the LEP project

    International Nuclear Information System (INIS)

    Adams, J.B.

    1979-01-01

    The plans for LEP are discussed with particular reference to the economic and political aspects rather than the scientific ones. The author outlines the steps which must be taken and the obstacles to be overcome before LEP can be built. Specific points considered are the energy of LEP, its size and siting and the cost and energy consumption. (W.D.L.)

  12. Prof. Manuel Trajtenberg, Chair of the Planning and Budget Committee, Council for Higher Education in Israel with CERN Director-General R. Heuer and in front of the ATLAS detector on Thursday 14th January.

    CERN Multimedia

    Maximilien Brice; Point 1

    2010-01-01

    Prof. Manuel Trajtenberg, Chair of the Planning and Budget Committee, Council for Higher Education in Israel with CERN Director-General R. Heuer and in front of the ATLAS detector on Thursday 14th January.

  13. 46 CFR 176.814 - Steering systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Steering systems. 176.814 Section 176.814 Shipping COAST...) INSPECTION AND CERTIFICATION Material Inspections § 176.814 Steering systems. At each initial and subsequent inspection for certification the owner or managing operator shall be prepared to test the steering systems of...

  14. Demand side management using profile steering

    NARCIS (Netherlands)

    Gerards, Marco Egbertus Theodorus; Toersche, Hermen; Hoogsteen, Gerwin; van der Klauw, Thijs; Hurink, Johann L.; Smit, Gerardus Johannes Maria

    2015-01-01

    Many Demand Side Management (DSM) approaches use energy prices as steering signals. This paper shows that such steering signals may result in power quality problems and high losses. As an alternative, this paper proposes to use desired (e.g., flat) power profiles as steering signals and presents an

  15. Experimental verification of multidimensional quantum steering

    Science.gov (United States)

    Li, Che-Ming; Lo, Hsin-Pin; Chen, Liang-Yu; Yabushita, Atsushi

    2018-03-01

    Quantum steering enables one party to communicate with another remote party even if the sender is untrusted. Such characteristics of quantum systems not only provide direct applications to quantum information science, but are also conceptually important for distinguishing between quantum and classical resources. While concrete illustrations of steering have been shown in several experiments, quantum steering has not been certified for higher dimensional systems. Here, we introduce a simple method to experimentally certify two different kinds of quantum steering: Einstein-Podolsky-Rosen (EPR) steering and single-system (SS) steering (i.e., temporal steering), for dimensionality (d) up to d = 16. The former reveals the steerability among bipartite systems, whereas the latter manifests itself in single quantum objects. We use multidimensional steering witnesses to verify EPR steering of polarization-entangled pairs and SS steering of single photons. The ratios between the measured witnesses and the maximum values achieved by classical mimicries are observed to increase with d for both EPR and SS steering. The designed scenario offers a new method to study further the genuine multipartite steering of large dimensionality and potential uses in quantum information processing.

  16. Nr 251 - Report on the behalf of the Commission of finances, general economy and budget control on the finance bill project for 2013. Appendix Nr 13: ecology, sustainable development and planning, risk prevention, management and steering of policies of ecology, energy, sustainable development and sea

    International Nuclear Information System (INIS)

    Eckert, Christian; Mariton, Herve

    2012-01-01

    After having indicated some key figures (public finances and budgets awarded to different involved institutions and agencies), this report comments and discusses the various challenges and financial aspects regarding risk prevention: evolution of endowments in 2013, action in the field of prevention of technological risks and pollutions, issue of nuclear safety after the Fukushima accident (actions undertaken by the ASN, IRSN and ANDRA), assessment of the implementation of the PPRN (plan of prevention of natural risks) and management of flood risks, management of the after-mine period. The second part discusses the management and steering of policies of ecology, energy, sustainable development and sea in a context of decreased endowments

  17. 76 FR 27019 - Interagency Ocean Observation Committee, Meeting of the Data Management and Communications...

    Science.gov (United States)

    2011-05-10

    ... Observation Committee, Meeting of the Data Management and Communications Steering Team AGENCY: National Ocean... meeting of the IOOC's Data Management and Communications Steering Team (DMAC-ST). The DMAC-ST membership... the IOOC in December 2010 to assist with technical guidance with respect to the management of ocean...

  18. Multiobjective optimization of a steering linkage

    Energy Technology Data Exchange (ETDEWEB)

    Sleesonsom, S.; Bureerat, S. [Sustainable and Infrastructure Research and Development Center, Dept. of Mechanical Engineering, Faculty of Engineering, Khon Kaen University, Khon Kaen (Thailand)

    2016-08-15

    In this paper, multi-objective optimization of a rack-and-pinion steering linkage is proposed. This steering linkage is a common mechanism used in small cars with three advantages as it is simple to construct, economical to manufacture, and compact and easy to operate. In the previous works, many researchers tried to minimize a steering error but minimization of a turning radius is somewhat ignored. As a result, a multi-objective optimization problem is assigned to simultaneously minimize a steering error and a turning radius. The design variables are linkage dimensions. The design problem is solved by the hybrid of multi-objective population-based incremental learning and differential evolution with various constraint handling schemes. The new design strategy leads to effective design of rack-and-pinion steering linkages satisfying both steering error and turning radius criteria.

  19. Multiobjective optimization of a steering linkage

    International Nuclear Information System (INIS)

    Sleesonsom, S.; Bureerat, S.

    2016-01-01

    In this paper, multi-objective optimization of a rack-and-pinion steering linkage is proposed. This steering linkage is a common mechanism used in small cars with three advantages as it is simple to construct, economical to manufacture, and compact and easy to operate. In the previous works, many researchers tried to minimize a steering error but minimization of a turning radius is somewhat ignored. As a result, a multi-objective optimization problem is assigned to simultaneously minimize a steering error and a turning radius. The design variables are linkage dimensions. The design problem is solved by the hybrid of multi-objective population-based incremental learning and differential evolution with various constraint handling schemes. The new design strategy leads to effective design of rack-and-pinion steering linkages satisfying both steering error and turning radius criteria

  20. 46 CFR 108.641 - Instructions for changing steering gear.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Instructions for changing steering gear. 108.641 Section... steering gear. Instructions stating, in order, the different steps to be taken for changing to emergency and secondary steering gear must be posted in the steering gear room and at each secondary steering...

  1. 46 CFR 182.610 - Main steering gear.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Main steering gear. 182.610 Section 182.610 Shipping...) MACHINERY INSTALLATION Steering Systems § 182.610 Main steering gear. (a) A vessel must be provided with a main steering gear that is: (1) Of adequate strength and capable of steering the vessel at all service...

  2. Driver behavior following an automatic steering intervention.

    Science.gov (United States)

    Fricke, Nicola; Griesche, Stefan; Schieben, Anna; Hesse, Tobias; Baumann, Martin

    2015-10-01

    The study investigated driver behavior toward an automatic steering intervention of a collision mitigation system. Forty participants were tested in a driving simulator and confronted with an inevitable collision. They performed a naïve drive and afterwards a repeated exposure in which they were told to hold the steering wheel loosely. In a third drive they experienced a false alarm situation. Data on driving behavior, i.e. steering and braking behavior as well as subjective data was assessed in the scenarios. Results showed that most participants held on to the steering wheel strongly or counter-steered during the system intervention during the first encounter. Moreover, subjective data collected after the first drive showed that the majority of drivers was not aware of the system intervention. Data from the repeated drive in which participants were instructed to hold the steering wheel loosely, led to significantly more participants holding the steering wheel loosely and thus complying with the instruction. This study seems to imply that without knowledge and information of the system about an upcoming intervention, the most prevalent driving behavior is a strong reaction with the steering wheel similar to an automatic steering reflex which decreases the system's effectiveness. Results of the second drive show some potential for countermeasures, such as informing drivers shortly before a system intervention in order to prevent inhibiting reactions. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. On Electrohydraulic Pressure Control for Power Steering Applications : Active Steering for Road Vehicles

    OpenAIRE

    Dell'Amico, Alessandro

    2016-01-01

    This thesis deals with the Electrohydraulic Power Steering system for road vehicles, using electronic pressure control valves. With an ever increasing demand for safer vehicles and fewer traffic accidents, steering-related active safety functions are becoming more common in modern vehicles. Future road vehicles will also evolve towards autonomous vehicles, with several safety, environmental and financial benefits. A key component in realising such solutions is active steering. The power steer...

  4. Multi-Layer Traffic Steering

    DEFF Research Database (Denmark)

    Fotiadis, Panagiotis; Polignano, Michele; Gimenez, Lucas Chavarria

    2013-01-01

    This paper investigates the potentials of traffic steering in the Radio Resource Control (RRC) Idle state by evaluating the Absolute Priorities (AP) framework in a multilayer Long Term Evolution (LTE) macrocell scenario. Frequency priorities are broadcast on the system information and RRC Idle...... periods are not significantly long. Finally, better alignment between the RRC Connected and Idle mobility procedures is observed, guarantying significant decrease of handovers/reselections and potential battery life savings by minimizing the Inter-Frequency (IF) measurement rate in the RRC Idle....

  5. Country plan Zeeland, predesign. Official note reactions and answers

    International Nuclear Information System (INIS)

    1986-10-01

    In this official note of the steering committee Streekplanwerk (country plan work) the timely entered reactions on the predesign-country plan Zeeland, concerning the location of additional nuclear power plants in Borssele are elaborated. The relevance of the policy can be related to the character of the reactions on the predesign-country plan, as well as to the character of the answers and conclusions associated with them. The answers in this note may be important as explanations of the contents of the predesign-country plan. The remarks are arranged, summarized and answered as much as possible according to the arrangement of the predesign-country plan. By subject, in each case, first the corresponding reactions are summarized, next the reactions are answered. From the conclusions it appears if and to what extent reactions may give motivations for modifications in the predesign

  6. Three-bead steering microswimmers

    Science.gov (United States)

    Rizvi, Mohd Suhail; Farutin, Alexander; Misbah, Chaouqi

    2018-02-01

    The self-propelled microswimmers have recently attracted considerable attention as model systems for biological cell migration as well as artificial micromachines. A simple and well-studied microswimmer model consists of three identical spherical beads joined by two springs in a linear fashion with active oscillatory forces being applied on the beads to generate self-propulsion. We have extended this linear microswimmer configuration to a triangular geometry where the three beads are connected by three identical springs in an equilateral triangular manner. The active forces acting on each spring can lead to autonomous steering motion; i.e., allowing the swimmer to move along arbitrary paths. We explore the microswimmer dynamics analytically and pinpoint its rich character depending on the nature of the active forces. The microswimmers can translate along a straight trajectory, rotate at a fixed location, as well as perform a simultaneous translation and rotation resulting in complex curved trajectories. The sinusoidal active forces on the three springs of the microswimmer contain naturally four operating parameters which are more than required for the steering motion. We identify the minimal operating parameters which are essential for the motion of the microswimmer along any given arbitrary trajectory. Therefore, along with providing insights into the mechanics of the complex motion of the natural and artificial microswimmers, the triangular three-bead microswimmer can be utilized as a model for targeted drug delivery systems and autonomous underwater vehicles where intricate trajectories are involved.

  7. The role of steering groups and project workers in NDUs.

    Science.gov (United States)

    Christian, S

    In light of the challenges that many nursing development units (NDUs) have faced during the past four years, this paper assesses the usefulness, as perceived by their clinical leaders, of support structures that had to be in place to secure NDU status. The structures assessed were a steering group and the allocation of a project worker by the King's Fund. Well organised steering groups offer unique opportunities to the NDUs to gain access to the knowledge and expertise of key figures, marketing the NDU and ensuring the project progresses to plan. Influential project workers were found to support the clinical leader and NDU staff, act as an external advocate and provide a global knowledge of nursing developments. This is the second of two papers reporting on a Department of Health-funded review of NDUs. The first appeared in Nursing Times on November 20.

  8. How Insect Flight Steering Muscles Work

    OpenAIRE

    Walker, Simon M.; Schwyn, Daniel A.; Mokso, Rajmund; Wicklein, Martina; Müller, Tonya; Doube, Michael; Stampanoni, Marco; Krapp, Holger G.; Taylor, Graham K.

    2014-01-01

    Dipteran flies are amongst the smallest and most agile of flying animals. Their wings are driven indirectly by large power muscles, which cause cyclical deformations of the thorax that are amplified through the intricate wing hinge. Asymmetric flight manoeuvres are controlled by 13 pairs of steering muscles acting directly on the wing articulations. Collectively the steering muscles account for

  9. Steer-by-wire innovations and demonstrator

    NARCIS (Netherlands)

    Lupker, H.A.; Zuurbier, J.; Verschuren, R.M.A.F.; Jansen, S.T.H.; Willemsen, D.M.C.

    2002-01-01

    Arguments for 'by-wire' systems include production costs, packaging and traffic safety. Innovations concern both product and development process e.g. combined virtual engineering and Hardware-in-the-loop testing. Three Steer-by-wire systems are discussed: a steering system simulator used as a

  10. A new model to compute the desired steering torque for steer-by-wire vehicles and driving simulators

    Science.gov (United States)

    Fankem, Steve; Müller, Steffen

    2014-05-01

    This paper deals with the control of the hand wheel actuator in steer-by-wire (SbW) vehicles and driving simulators (DSs). A novel model for the computation of the desired steering torque is presented. The introduced steering torque computation does not only aim to generate a realistic steering feel, which means that the driver should not miss the basic steering functionality of a modern conventional steering system such as an electric power steering (EPS) or hydraulic power steering (HPS), and this in every driving situation. In addition, the modular structure of the steering torque computation combined with suitably selected tuning parameters has the objective to offer a high degree of customisability of the steering feel and thus to provide each driver with his preferred steering feel in a very intuitive manner. The task and the tuning of each module are firstly described. Then, the steering torque computation is parameterised such that the steering feel of a series EPS system is reproduced. For this purpose, experiments are conducted in a hardware-in-the-loop environment where a test EPS is mounted on a steering test bench coupled with a vehicle simulator and parameter identification techniques are applied. Subsequently, how appropriate the steering torque computation mimics the test EPS system is objectively evaluated with respect to criteria concerning the steering torque level and gradient, the feedback behaviour and the steering return ability. Finally, the intuitive tuning of the modular steering torque computation is demonstrated for deriving a sportier steering feel configuration.

  11. Product assurance planning in an environment of increased need for accountability

    Science.gov (United States)

    Esparza, V.; Casey, C.

    1991-10-01

    Projects producing data are too often providing a product that is neither defensible nor usable. Instead of planning for data of known and required quality, managers are too often asking for (and getting) the wrong thing. The problem is a lack of correct planning strategy. A planning strategy to produce usable, defensible data requires communication from the customer to top-level management and from top-level management to the project leader, who must then communicate with the technical experts who will run the project. EPA requires that data quality objectives (DQOs) be derived for RI/FS projects. The DQO process is a top-down planning process that requires two-way communication; some organizations do not have structures suited for implementing DQOs as mandated by EPA. This paper discusses specific tools for imposing structure that will make the DQO process easier to follow for many organizations. The tools include a steering committee, a test design team, and Quality Function Deployment (QFD) matrices. The steering committee is a strong technical forum that can develop technical issues systematically and break down technical issues into manageable pieces that can be stated as test objectives. The test design team plans each test, systematically designs the test matrix, and guides the completion of test documentation that will be used to defend the data collected. QFD matrices are used as tools by both steering committee and test design team as a highly structured, systematic means of relating top-level (customer) requirements to data quality needs and measurement system design.

  12. Operator space approach to steering inequality

    International Nuclear Information System (INIS)

    Yin, Zhi; Marciniak, Marcin; Horodecki, Michał

    2015-01-01

    In Junge and Palazuelos (2011 Commun. Math. Phys. 306 695–746) and Junge et al (2010 Commun. Math. Phys. 300 715–39) the operator space theory was applied to study bipartite Bell inequalities. The aim of the paper is to follow this line of research and use the operator space technique to analyze the steering scenario. We obtain a bipartite steering functional with unbounded largest violation of steering inequality, as well as constructing all ingredients explicitly. It turns out that the unbounded largest violation is obtained by a non maximally entangled state. Moreover, we focus on the bipartite dichotomic case where we construct a steering functional with unbounded largest violation of steering inequality. This phenomenon is different to the Bell scenario where only the bounded largest violation can be obtained by any bipartite dichotomic Bell functional. (paper)

  13. Biogas production from steer manures in Vietnam

    DEFF Research Database (Denmark)

    Pham, Cuong H.; Saggar, Surinder; Vu, Cuong C.

    2017-01-01

    manures collected from two different experiments of steers fed diets containing feed supplements. BMP was 110.1 (NLkg-1 VS) for manure from steers receiving a control diet, significantly lower 79.0 (NL kg-1 VS) for manure from steers fed a diet containing 0.3% tannin (%DM), but then showed an increasing...... trend to 90.9 and 91.2 (NL kg-1 VS) for manures from steers receiving 0.4 and 0.5% tannin (%DM) supplements, respectively. Similarly, the CH4 production (NL kg-1 VS) of manure from steers was 174 for control, 142 for control supplemented concentrate (C), 143 for control added rice straw treated...

  14. A Plan for the Development of Fusion Energy. Final Report to Fusion Energy Sciences Advisory Committee, Fusion Development Path Panel

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2003-03-05

    This report presents a plan for the deployment of a fusion demonstration power plant within 35 years, leading to commercial application of fusion energy by mid-century. The plan is derived from the necessary features of a demonstration fusion power plant and from the time scale defined by President Bush. It identifies critical milestones, key decision points, needed major facilities and required budgets.

  15. Government observations on the 7. report from the Committee (Session 1989-90) on the Department of Energy's spending plans, 1990-91

    International Nuclear Information System (INIS)

    1990-01-01

    The House of Commons Energy Committee recently reported in the Department of Energy's spending plans for 1990-91. This Memorandum represents the Government's response to their recommendations. A review of the structure and size of research and development expenditure is anticipated. Research should focus on pollution reduced coal-based electricity generation and wave energy provided prospects prove sufficiently promising. The reasons for the closure of the Winfrith Reactor are outlined. Fusion power is seen as expensive, too long term and unlikely to be economically viable, but the Joint European Torus (JET) programme will be supported until 1996. Cost of decommissioning JET are a cause for concern. Nuclear Electric is deemed to be acting too slowly in setting proper financial targets. No change is envisaged in the Government's arrangements to fund overseas atomic energy programmes in collaboration with the International Atomic Energy Authority. The costs of publicity promoting civilian nuclear programmes is seen as too high. (author)

  16. Steering particles by breaking symmetries

    Science.gov (United States)

    Bet, Bram; Samin, Sela; Georgiev, Rumen; Burak Eral, Huseyin; van Roij, René

    2018-06-01

    We derive general equations of motions for highly-confined particles that perform quasi-two-dimensional motion in Hele-Shaw channels, which we solve analytically, aiming to derive design principles for self-steering particles. Based on symmetry properties of a particle, its equations of motion can be simplified, where we retrieve an earlier-known equation of motion for the orientation of dimer particles consisting of disks (Uspal et al 2013 Nat. Commun. 4), but now in full generality. Subsequently, these solutions are compared with particle trajectories that are obtained numerically. For mirror-symmetric particles, excellent agreement between the analytical and numerical solutions is found. For particles lacking mirror symmetry, the analytic solutions provide means to classify the motion based on particle geometry, while we find that taking the side-wall interactions into account is important to accurately describe the trajectories.

  17. Beam Steering Devices Reduce Payload Weight

    Science.gov (United States)

    2012-01-01

    Scientists have long been able to shift the direction of a laser beam, steering it toward a target, but often the strength and focus of the light is altered. For precision applications, where the quality of the beam cannot be compromised, scientists have typically turned to mechanical steering methods, redirecting the source of the beam by swinging the entire laser apparatus toward the target. Just as the mechanical methods used for turning cars has evolved into simpler, lighter, power steering methods, so has the means by which researchers can direct lasers. Some of the typical contraptions used to redirect lasers are large and bulky, relying on steering gimbals pivoted, rotating supports to shift the device toward its intended target. These devices, some as large and awkward as a piece of heavy luggage, are subject to the same issues confronted by mechanical parts: Components rub, wear out, and get stuck. The poor reliability and bulk not to mention the power requirements to run one of the machines have made mechanical beam steering components less than ideal for use in applications where weight, bulk, and maneuverability are prime concerns, such as on an unmanned aerial vehicle (UAV) or a microscope. The solution to developing reliable, lighter weight, nonmechanical steering methods to replace the hefty steering boxes was to think outside the box, and a NASA research partner did just that by developing a new beam steering method that bends and redirects the beam, as opposed to shifting the entire apparatus. The benefits include lower power requirements, a smaller footprint, reduced weight, and better control and flexibility in steering capabilities. Such benefits are realized without sacrificing aperture size, efficiency, or scanning range, and can be applied to myriad uses: propulsion systems, structures, radiation protection systems, and landing systems.

  18. Automated beam steering using optimal control

    Energy Technology Data Exchange (ETDEWEB)

    Allen, C. K. (Christopher K.)

    2004-01-01

    We present a steering algorithm which, with the aid of a model, allows the user to specify beam behavior throughout a beamline, rather than just at specified beam position monitor (BPM) locations. The model is used primarily to compute the values of the beam phase vectors from BPM measurements, and to define cost functions that describe the steering objectives. The steering problem is formulated as constrained optimization problem; however, by applying optimal control theory we can reduce it to an unconstrained optimization whose dimension is the number of control signals.

  19. 46 CFR 58.25-20 - Piping for steering gear.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Piping for steering gear. 58.25-20 Section 58.25-20... MACHINERY AND RELATED SYSTEMS Steering Gear § 58.25-20 Piping for steering gear. (a) Pressure piping must... the hydraulic system can be readily recharged from within the steering-gear compartment and must be...

  20. Planning and management of uranium mine and mill closures. Proceedings of a technical committee meeting held in Liberec, Czech Republic, 3-6 May 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Technical Committee Meeting on Planning and Management of Uranium Mine and Mill Closures was held in Liberec, Czech Republic from 3 to 6 May 1994. A total of 30 participants from nine countries attended the meeting. Nineteen papers were presented. Most of these papers dealt with the concept of and experiences in planning for and the subsequent decommissioning and rehabilitation of uranium mines and mills in Australia, Canada, Czech Republic, Germany, Romania, Slovenia, Spain and the USA. Two papers discussed the government`s role and relevant regulations related to the closures, decommissioning and remediation of uranium production facilities. Of particular interest to the participants was a non-technical paper presented by the Mayor of the city of Andujar, Spain, describing the negative political and socio-economic impacts associated with closure and decommissioning of an uranium mine/mill facility. The highlights of the meeting were the field visits to the uranium production facilities and rehabilitation programme sites of DIAMO and WISMUT companies, located respectively in Straz, Czech Republic and Koenigstein, Germany. Refs, figs and tabs.

  1. Genuine Multipartite Einstein-Podolsky-Rosen Steering

    Science.gov (United States)

    He, Q. Y.; Reid, M. D.

    2013-12-01

    We develop the concept of genuine N-partite Einstein-Podolsky-Rosen (EPR) steering. This nonlocality is the natural multipartite extension of the original EPR paradox. Useful properties emerge that are not guaranteed for genuine multipartite entangled states. In particular, there is a close link with the task of one-sided, device-independent quantum secret sharing. We derive inequalities to demonstrate multipartite EPR steering for Greenberger-Horne-Zeilinger and Gaussian continuous variable states in loophole-free scenarios.

  2. Steering, Entanglement, Nonlocality, and the EPR Paradox

    OpenAIRE

    Wiseman, H. M.; Jones, S. J.; Doherty, A. C.

    2006-01-01

    The concept of steering was introduced by Schrodinger in 1935 as a generalization of the EPR paradox for arbitrary pure bipartite entangled states and arbitrary measurements by one party. Until now, it has never been rigorously defined, so it has not been known (for example) what mixed states are steerable (that is, can be used to exhibit steering). We provide an operational definition, from which we prove (by considering Werner states and Isotropic states) that steerable states are a strict ...

  3. Multipass Steering: A Reference Implementation

    Science.gov (United States)

    Hennessey, Michael; Tiefenback, Michael

    2015-10-01

    We introduce a reference implementation of a protocol to compute corrections that bring all beams in one of the CEBAF linear accelerators (linac) to axis, including, with a larger tolerance, the lowest energy pass using measured beam trajectory data. This method relies on linear optics as representation of the system; we treat beamline perturbations as magnetic field errors localized to regions between cryomodules, providing the same transverse momentum kick to each beam. We produce a vector of measured beam position data with which we left-multiply the pseudo-inverse of a coefficient array, A, that describes the transport of the beam through the linac using parameters that include the magnetic offsets of the quadrupole magnets, the instrumental offsets of the BPMs, and the beam initial conditions. This process is repeated using a reduced array to produce values that can be applied to the available correcting magnets and beam initial conditions. We show that this method is effective in steering the beam to a straight axis along the linac by using our values in elegant, the accelerator simulation program, on a model of the linac in question. The algorithms in this reference implementation provide a tool for systematic diagnosis and cataloging of perturbations in the beam line. Supported by Jefferson Lab, Old Dominion University, NSF, DOE.

  4. Quantum steering in cascaded four-wave mixing processes.

    Science.gov (United States)

    Wang, Li; Lv, Shuchao; Jing, Jietai

    2017-07-24

    Quantum steering is used to describe the "spooky action-at-a-distance" nonlocality raised in the Einstein-Podolsky-Rosen (EPR) paradox, which is important for understanding entanglement distribution and constructing quantum networks. Here, in this paper, we study an experimentally feasible scheme for generating quantum steering based on cascaded four-wave-mixing (FWM) processes in hot rubidium (Rb) vapor. Quantum steering, including bipartite steering and genuine tripartite steering among the output light fields, is theoretically analyzed. We find the corresponding gain regions in which the bipartite and tripartite steering exist. The results of bipartite steering can be used to establish a hierarchical steering model in which one beam can steer the other two beams in the whole gain region; however, the other two beams cannot steer the first beam simultaneously. Moreover, the other two beams cannot steer with each other in the whole gain region. More importantly, we investigate the gain dependence of the existence of the genuine tripartite steering and we find that the genuine tripartite steering exists in most of the whole gain region in the ideal case. Also we discuss the effect of losses on the genuine tripartite steering. Our results pave the way to experimental demonstration of quantum steering in cascaded FWM process.

  5. Improvement of motor inertia influence of electric power steering; Dendoshiki power steering no motor kansei no eikyo to hosho

    Energy Technology Data Exchange (ETDEWEB)

    Takehara, S; Sakamoto, K; Hanamoto, Y [Mazda Motor Corp., Hiroshima (Japan); Noritsugu, T [Okayama University, Okayama (Japan)

    1997-10-01

    Motor inertia of electric power steering affects not only steering characteristics but vehicle dynamics. We have investigated the influence of motor inertia and proposed a feedback strategy to compensate it. Weight of the test vehicle is 1100Kg and the steering system is pinion type electric power steering. By using simulation model and vehicle test, we have realized natural steering maneuvering and stable vehicle dynamics. 4 refs., 11 figs.

  6. Networks: structure and action : steering in and steering by policy networks

    NARCIS (Netherlands)

    Dassen, A.

    2010-01-01

    This thesis explores the opportunities to build a structural policy network model that is rooted in social network theories. By making a distinction between a process of steering in networks, and a process of steering by networks, it addresses the effects of network structures on network dynamics as

  7. Reproductive planning in times of Zika: getting pregnant or delaying plans? The opinion of the Brazilian Society of Assisted Reproduction Committee - a basis for a bioethical discussion.

    Science.gov (United States)

    Carvalho, Bruno R de; Taitson, Paulo F; Brandão, Karina S A G; Ferriani, Rui Alberto; Nakagawa, Hitomi M; Silva, Adelino A; Lopes, Joaquim R C

    2016-08-01

    Although the causality between Zika virus, microcephaly, and other central nervous system disorders has been taken for granted by the scientific community, many uncertainties remain. The gap of knowledge at the moment is large enough to remove part of the confidence physicians have on the advice given to patients - and infertile women in particular - on their reproductive plans. Pretreatment serologic screening is a possible strategy to offer more confidence for individuals choosing to bear children regardless of the Zika virus, but the tests currently available do not seem to be sufficiently adequate. Until now, there is no formal recommendation to avoid pregnancy solely because of the Zika virus outbreak, and the choice of becoming pregnant has been regarded as a personal decision to be made by each woman and her family.

  8. Assessment of a Boat Fractured Steering Wheel

    Directory of Open Access Journals (Sweden)

    Vukelic Goran

    2016-09-01

    Full Text Available During regular use of the steering wheel mounted on a boat, two cracks emanating from a fastener hole were noticed which, consequently, caused final fracture of the wheel. To determine the behavior of a boat steering wheel with cracks present, assessment of a fractured wheel was performed. Torque moments of the fasteners were measured prior to removing the steering wheel from the boat. Visual and dye penetrant inspection followed along with the material detection. Besides using experimental procedures, assessment of the fractured wheel was performed using finite element analysis, i.e. stress intensity factor values were numerically determined. Variation of stress intensity factor with crack length is presented. Possible causes of crack occurrence are given and they include excessive values of fastener torque moments coupled with fretting between fastener and fastener hole that was poorly machined. Results obtained by this assessment can be taken for predicting fracture behavior of a cracked steering wheel and as a reference in the design, mounting and exploitation process of steering wheels improving that way their safety in transportation environment.

  9. Review of the Strategic Plan for International Collaboration on Fusion Science and Technology Research. Fusion Energy Sciences Advisory Committee (FESAC)

    International Nuclear Information System (INIS)

    1998-01-01

    The United States Government has employed international collaborations in magnetic fusion energy research since the program was declassified in 1958. These collaborations have been successful not only in producing high quality scientific results that have contributed to the advancement of fusion science and technology, they have also allowed us to highly leverage our funding. Thus, in the 1980s, when the funding situation made it necessary to reduce the technical breadth of the U.S. domestic program, these highly leveraged collaborations became key strategic elements of the U.S. program, allowing us to maintain some degree of technical breadth. With the recent, nearly complete declassification of inertial confinement fusion, the use of some international collaboration is expected to be introduced in the related inertial fusion energy research activities as well. The United States has been a leader in establishing and fostering collaborations that have involved scientific and technological exchanges, joint planning, and joint work at fusion facilities in the U.S. and worldwide. These collaborative efforts have proven mutually beneficial to the United States and our partners. International collaborations are a tool that allows us to meet fusion program goals in the most effective way possible. Working with highly qualified people from other countries and other cultures provides the collaborators with an opportunity to see problems from new and different perspectives, allows solutions to arise from the diversity of the participants, and promotes both collaboration and friendly competition. In short, it provides an exciting and stimulating environment resulting in a synergistic effect that is good for science and good for the people of the world.

  10. Online optimized hysteresis-based steering feel model for steer-by-wire systems

    Directory of Open Access Journals (Sweden)

    Ahmet Kirli

    2016-06-01

    Full Text Available In rubber-wheeled road vehicles, the mechanical connection between steering wheel and front wheels provides steering-related feedback to the driver. The torque fed back to the driver through the steering linkages and steering wheel, which is called steering feel, helps the driver in controlling the vehicle. The torque feedback is reproduced via artificial methods in steer-by-wire systems due to the lack of mechanical connection. In this work, in order to minimize the physical workload and the lateral acceleration under the consideration of handling performance, optimization of a hysteresis-based steering feel has been studied. A 2-degree-of-freedom bicycle model based on the magic formula tire model has been used for simulations and hardware-in-the-loop experiments. A mathematical model is proposed in order to create an adaptive model-based optimization of the hysteresis parameters simultaneously while driving. A hardware-in-the-loop experimental setup has been used for the driving tests. The weave and the double-lane change tests have been performed with different drivers in order to demonstrate and quantify the optimization methods that are presented in this work.

  11. Drowsy Driver Detection via Steering Wheel

    Directory of Open Access Journals (Sweden)

    Herlina ABDUL RAHIM

    2010-09-01

    Full Text Available The main purpose of this project is to produce a safety system especially for fatigue car driver so as to prevent from accidents. The statistic on road fatality shows that human error constitute of 64.84 % road accidents fatality and 17.4 % due to technical factors. These systems encompassed the approach of hand pressure applied on the steering wheel. The steering will be installed with pressure sensors. At the same time these sensors can be used to measure gripping force while driving.

  12. 78 FR 29135 - HIT Standards Committee Advisory Meeting

    Science.gov (United States)

    2013-05-17

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting AGENCY: Office of...: HIT Standards Committee. General Function of the Committee: To provide recommendations to the National... Federal Health IT Strategic Plan, and in accordance with policies developed by the HIT Policy Committee...

  13. 46 CFR 182.620 - Auxiliary means of steering.

    Science.gov (United States)

    2010-10-01

    ... TONS) MACHINERY INSTALLATION Steering Systems § 182.620 Auxiliary means of steering. (a) Except as... personnel hazards during normal or heavy weather operation. (b) A suitable hand tiller may be acceptable as...

  14. Relative entropy of steering: on its definition and properties

    International Nuclear Information System (INIS)

    Kaur, Eneet; Wilde, Mark M

    2017-01-01

    In Gallego and Aolita (2015 Phys. Rev . X 5 041008), the authors proposed a definition for the relative entropy of steering and showed that the resulting quantity is a convex steering monotone. Here we advocate for a different definition for relative entropy of steering, based on well grounded concerns coming from quantum Shannon theory. We prove that this modified relative entropy of steering is a convex steering monotone. Furthermore, we establish that it is uniformly continuous and faithful, in both cases giving quantitative bounds that should be useful in applications. We also consider a restricted relative entropy of steering which is relevant for the case in which the free operations in the resource theory of steering have a more restricted form (the restricted operations could be more relevant in practical scenarios). The restricted relative entropy of steering is convex, monotone with respect to these restricted operations, uniformly continuous, and faithful. (paper)

  15. Standing Concertation Committee

    CERN Document Server

    HR Department

    2009-01-01

    Main points examined at the meeting of 24 June 2009 Results of the 2009 MARS exercise The Committee took note of the results of the 2009 MARS exercise presented by the Head of the HR Department, expressing satisfaction for the early availability of the statistics and for the fact that the analysis of the results covered the last three years. Status report on the work on the five-yearly review The Committee took note of a presentation by P. Gildemyn on the data collection procedure for the 2010 five-yearly review (staff, fellows, associate members of the personnel, CHIS) and of the proposed work schedule. Implications for employment conditions of the discussions at the Finance Committee and Council on 17 and 18 June 2009 The Chairman briefly reported on the discussions at the meetings of the Finance Committee and Council in June 2009, on the 2010-2014 medium-term plan and the 2010 preliminary draft budget, as well as on the modified strategy and goals for 2009. The Committee ...

  16. Design and manufacturing of mechanical steering system for ...

    African Journals Online (AJOL)

    Design and manufacturing of mechanical steering system for parallel parking, zero turning radius, minimum turning radius with traditional turning. ... of the steering system are designed so as to meet all the configuration of steering system and to be well-matched to the power train, suspension system and body of the car.

  17. Speed choice and steering behavior in curve driving

    NARCIS (Netherlands)

    Winsum, W. van; Godthelp, J.

    1996-01-01

    The relation between speed choice and steering performance during curve negotiation was studied in a driving simulator. The hypothesis was that curve radius and steering competence both affect steering error during curve driving, resulting in compensatory speed choice. In this, the control of safety

  18. 46 CFR 167.65-25 - Steering gear tests.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Steering gear tests. 167.65-25 Section 167.65-25... SHIPS Special Operating Requirements § 167.65-25 Steering gear tests. On all nautical school ships making voyages of more than 48 hours' duration, the entire steering gear, the whistle, the means of...

  19. 46 CFR 61.20-1 - Steering gear.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Steering gear. 61.20-1 Section 61.20-1 Shipping COAST... Periodic Tests of Machinery and Equipment § 61.20-1 Steering gear. (a) The marine inspector must inspect the steering gear at each inspection for certification for vessels whose Certificate of Inspections...

  20. Steering Dynamics in the Dutch Education System

    Science.gov (United States)

    Waslander, Sietske; Hooge, Edith; Drewes, Tineke

    2016-01-01

    Based on detailed empirical analyses, we paint a layered picture of emerging steering dynamics. Inspired by Foucault, we put the focus on roles stakeholders define both for themselves and others, how they give sense to policy, how they work together in policy elaboration and implementation, and the subtle and sometimes deceitful function of soft…

  1. Use of free steered vehicles. [United Kingdom

    Energy Technology Data Exchange (ETDEWEB)

    Ferris, W

    1986-01-01

    The UK National Coal Board's Western Area is currently producing 10.5 m/tons per annum from 16 collieries exploiting 26 different seams. This article looks at the use of free steered vehicles (FSV's) in Haig Colliery, Point of Ayr and Silverdale Colliery, covering general applications, installation of coal faces and face salvage by FSV's.

  2. Development of steering system in network environment

    International Nuclear Information System (INIS)

    Kanagawa, Fumihiro; Noguchi, So; Yamashita, Hideo

    2002-01-01

    We have been developing the steering system, which can successively observe the-data obtained during the numerical computation and change the parameters in the analysis. Moreover, this system is also extended to link the network. By using this system, a user can easily detect errors immediately and achieve the rapid and accurate analysis with lower computation cost. (Author)

  3. Quantum Steering Beyond Instrumental Causal Networks

    Science.gov (United States)

    Nery, R. V.; Taddei, M. M.; Chaves, R.; Aolita, L.

    2018-04-01

    We theoretically predict, and experimentally verify with entangled photons, that outcome communication is not enough for hidden-state models to reproduce quantum steering. Hidden-state models with outcome communication correspond, in turn, to the well-known instrumental processes of causal inference but in the one-sided device-independent scenario of one black-box measurement device and one well-characterized quantum apparatus. We introduce one-sided device-independent instrumental inequalities to test against these models, with the appealing feature of detecting entanglement even when communication of the black box's measurement outcome is allowed. We find that, remarkably, these inequalities can also be violated solely with steering, i.e., without outcome communication. In fact, an efficiently computable formal quantifier—the robustness of noninstrumentality—naturally arises, and we prove that steering alone is enough to maximize it. Our findings imply that quantum theory admits a stronger form of steering than known until now, with fundamental as well as practical potential implications.

  4. Engineering Sciences Strategic Leadership Plan

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Heidi A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-02-14

    The purpose of this report is to promote the three key elements of engineering capabilities, staff and engagement in coordination with an R&D investment cycle; and establish an Engineering Steering Council to own and guide this leadership plan.

  5. Introductory materials for committee members: 1) instructions for the Los Alamos National Laboratory fiscal year 2010 capability reviews 2) NPAC strategic capability planning 3) Summary self-assessment for the nuclear and particle physics, astrophysics an

    Energy Technology Data Exchange (ETDEWEB)

    Redondo, Antonio [Los Alamos National Laboratory

    2010-01-01

    Los Alamos National Laboratory (LANL) uses external peer review to measure and continuously improve the quality of its science, technology and engineering (STE). LANL uses capability reviews to assess the STE quality and institutional integration and to advise Laboratory Management on the current and future health of the STE. Capability reviews address the STE integration that LANL uses to meet mission requirements. STE capabilities are define to cut across directorates providing a more holistic view of the STE quality, integration to achieve mission requirements, and mission relevance. The scope of these capabilities necessitate that there will be significant overlap in technical areas covered by capability reviews (e.g., materials research and weapons science and engineering). In addition, LANL staff may be reviewed in different capability reviews because of their varied assignments and expertise. LANL plans to perform a complete review of the Laboratory's STE capabilities (hence staff) in a three-year cycle. The principal product of an external review is a report that includes the review committee's assessments, commendations, and recommendations for STE. The Capability Review Committees serve a dual role of providing assessment of the Laboratory's technical contributions and integration towards its missions and providing advice to Laboratory Management. The assessments and advice are documented in reports prepared by the Capability Review Committees that are delivered to the Director and to the Principal Associate Director for Science, Technology and Engineering (PADSTE). This report will be used by Laboratory Management for STE assessment and planning. The report is also provided to the Department of Energy (DOE) as part of LANL's Annual Performance Plan and to the Los Alamos National Security (LANS) LLC's Science and Technology Committee (STC) as part of its responsibilities to the LANS Board of Governors.

  6. Steering disturbance rejection using a physics-based neuromusculoskeletal driver model

    Science.gov (United States)

    Mehrabi, Naser; Sharif Razavian, Reza; McPhee, John

    2015-10-01

    The aim of this work is to develop a comprehensive yet practical driver model to be used in studying driver-vehicle interactions. Drivers interact with their vehicle and the road through the steering wheel. This interaction forms a closed-loop coupled human-machine system, which influences the driver's steering feel and control performance. A hierarchical approach is proposed here to capture the complexity of the driver's neuromuscular dynamics and the central nervous system in the coordination of the driver's upper extremity activities, especially in the presence of external disturbance. The proposed motor control framework has three layers: the first (or the path planning) plans a desired vehicle trajectory and the required steering angles to perform the desired trajectory; the second (or the musculoskeletal controller) actuates the musculoskeletal arm to rotate the steering wheel accordingly; and the final layer ensures the precision control and disturbance rejection of the motor control units. The physics-based driver model presented here can also provide insights into vehicle control in relaxed and tensed driving conditions, which are simulated by adjusting the driver model parameters such as cognition delay and muscle co-contraction dynamics.

  7. A Frictionless Steering Mechanism for the Front Steering ECCD ITER Upper Port Launcher

    International Nuclear Information System (INIS)

    Chavan, R; Henderson, M A; Sanchez, F

    2005-01-01

    A FS launcher is being designed for the ITER upper port, which offers enhanced physics performance over the RS launcher. A two mirror system is used to decouple the focusing and steering aspects of the launcher and provide a relatively small beam waist ( 1.6 m from the steering mirror). The resulting NTM stabilization efficiency (maximum CD density divided by the local bootstrap current >1.6) is above marginal for the q = 2 and 3/2 rational flux surfaces of the relevant ITER equilibria (scenarios 2, 3a and 5) and a factor of ∼3 relative to an equivalent RS launcher. The performance of the FS launcher strongly depends on the reliability of the steering mechanism, which is used to rotate the plasma facing steering mirror. CRPP has designed a frictionless steering mechanism assembled in a compact cartridge capable of up to ±10 deg. rotation (corresponding to a poloidal steering range of up to ±20 deg. for the microwave beam around a fixed axis of rotation) that offers a high operation reliability despite the close proximity to the thermal and neutron flux coming from the ITER plasma

  8. Improving Einstein–Podolsky–Rosen steering inequalities with state information

    International Nuclear Information System (INIS)

    Schneeloch, James; Broadbent, Curtis J.; Howell, John C.

    2014-01-01

    We discuss the relationship between entropic Einstein–Podolsky–Rosen (EPR)-steering inequalities and their underlying uncertainty relations along with the hypothesis that improved uncertainty relations lead to tighter EPR-steering inequalities. In particular, we discuss how using information about the state of a quantum system affects one's ability to witness EPR-steering. As an example, we consider the recent improvement to the entropic uncertainty relation between pairs of discrete observables (Berta et al., 2010 [10]). By considering the assumptions that enter into the development of a steering inequality, we derive correct steering inequalities from these improved uncertainty relations and find that they are identical to ones already developed (Schneeloch et al., 2013 [9]). In addition, we consider how one can use state information to improve our ability to witness EPR-steering, and develop a new continuous variable symmetric EPR-steering inequality as a result.

  9. Method of Controlling Steering of a Ground Vehicle

    Science.gov (United States)

    Dawson, Andrew D. (Inventor); Bluethmann, William J. (Inventor); Lee, Chunhao J. (Inventor); Vitale, Robert L. (Inventor); Guo, Raymond (Inventor); Atluri, Venkata Prasad (Inventor)

    2016-01-01

    A method of controlling steering of a vehicle through setting wheel angles of a plurality of modular electronic corner assemblies (eModules) is provided. The method includes receiving a driving mode selected from a mode selection menu. A position of a steering input device is determined in a master controller. A velocity of the vehicle is determined, in the master controller, when the determined position of the steering input device is near center. A drive mode request corresponding to the selected driving mode to the plurality of steering controllers is transmitted to the master controller. A required steering angle of each of the plurality of eModules is determined, in the master controller, as a function of the determined position of the steering input device, the determined velocity of the vehicle, and the selected first driving mode. The eModules are set to the respective determined steering angles.

  10. NANA Strategic Energy Plan & Energy Options Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Jay Hermanson; Brian Yanity

    2008-12-31

    NANA Strategic Energy Plan summary NRC, as an Alaska Native Corporation, has committed to addressing the energy needs for its shareholders. The project framework calls for implicit involvement of the IRA Councils in the Steering Committee. Tribal Members, from the NRC to individual communities, will be involved in development of the NANA Energy Plan. NRC, as the lead tribal entity, will serve as the project director of the proposed effort. The NRC team has communicated with various governmental and policy stakeholders via meetings and discussions, including Denali Commission, Alaska Energy Authority, and other governmental stakeholders. Work sessions have been initiated with the Alaska Village Electric Cooperative, the NW Arctic Borough, and Kotzebue Electric Association. The NRC Strategic Energy Plan (SEP) Steering committee met monthly through April and May and weekly starting in June 2008 in preparation of the energy summit that was held from July 29-31, 2008. During preparations for the energy summit and afterwards, there was follow through and development of project concepts for consideration. The NANA regional energy summit was held from July 29-31, 2008, and brought together people from all communities of the Northwest Arctic Borough. The effort was planned in conjunction with the Alaska Energy Authority’s state-wide energy planning efforts. Over $80,000 in cash contributions was collected from various donors to assist with travel from communities and to develop the summit project. Available funding resources have been identified and requirements reviewed, including the Denali Commission, U.S. Dept. of Agriculture, and the Alaska Energy Authority. A component of the overall plan will be a discussion of energy funding and financing. There are current project concepts submitted, or are ready for submittal, in the region for the following areas: • Wind-diesel in Deering, Buckland, Noorik, and Kiana areas; potential development around Red Dog mine.

  11. Steering, Entanglement, Nonlocality, and the EPR Paradox

    Science.gov (United States)

    Wiseman, Howard; Jones, Steve; Andrew, Doherty

    2007-06-01

    The concept of steering was introduced by Schroedinger in 1935 as a generalization of the EPR paradox for arbitrary pure bipartite entangled states and arbitrary measurements by one party. Until now, it has never been rigorously defined, so it has not been known (for example) what mixed states are steerable (that is, can be used to exhibit steering). We provide an operational definition, from which we prove (by considering Werner states and Isotropic states) that steerable states are a strict subset of the entangled states, and a strict superset of the states that can exhibit Bell-nonlocality. For arbitrary bipartite Gaussian states we derive a linear matrix inequality that decides the question of steerability via Gaussian measurements, and we relate this to the original EPR paradox.

  12. Conditional steering under the von Neumann scenario

    Science.gov (United States)

    Mukherjee, Kaushiki; Paul, Biswajit; Karmakar, Sumana; Sarkar, Debasis; Mukherjee, Amit; Bhattacharya, Some Sankar; Roy, Arup

    2017-08-01

    In Phys. Lett. A 166, 293 (1992), 10.1016/0375-9601(92)90711-T, Popescu and Rohrlich characterized nonlocality of pure n -partite entangled systems by studying bipartite violation of local realism when n -2 number of parties perform projective measurements on their particles. A pertinent question in this scenario is whether similar characterization is possible for n -partite mixed entangled states also. In the present work we have followed an analogous approach so as to explore whether given a tripartite mixed entangled state the conditional bipartite states obtained by performing projective measurement on the third party demonstrate a weaker form of nonlocality, quantum steering. We also compare this phenomenon of conditional steering with existing notions of tripartite correlations.

  13. SPS Beam Steering for LHC Extraction

    Energy Technology Data Exchange (ETDEWEB)

    Gianfelice-Wendt, Eliana [Fermilab; Bartosik, Hannes [CERN; Cornelis, Karel [CERN; Norderhaug Drøsdal, Lene [CERN; Goddard, Brennan [CERN; Kain, Verena [CERN; Meddahi, Malika [CERN; Papaphilippou, Yannis [CERN; Wenninger, Jorg [CERN

    2014-07-01

    The CERN Super Proton Synchrotron accelerates beams for the Large Hadron Collider to 450 GeV. In addition it produces beams for fixed target facilities which adds complexity to the SPS operation. During the run 2012-2013 drifts of the extracted beam trajectories have been observed and lengthy optimizations in the transfer lines were performed to reduce particle losses in the LHC. The observed trajectory drifts are consistent with the measured SPS orbit drifts at extraction. While extensive studies are going on to understand, and possibly suppress, the source of such SPS orbit drifts the feasibility of an automatic beam steering towards a “golden” orbit at the extraction septa, by means of the interlocked correctors, is also being investigated. The challenges and constraints related to the implementation of such a correction in the SPS are described. Simulation results are presented and a possible operational steering strategy is proposed.

  14. Pointing Device Performance in Steering Tasks.

    Science.gov (United States)

    Senanayake, Ransalu; Goonetilleke, Ravindra S

    2016-06-01

    Use of touch-screen-based interactions is growing rapidly. Hence, knowing the maneuvering efficacy of touch screens relative to other pointing devices is of great importance in the context of graphical user interfaces. Movement time, accuracy, and user preferences of four pointing device settings were evaluated on a computer with 14 participants aged 20.1 ± 3.13 years. It was found that, depending on the difficulty of the task, the optimal settings differ for ballistic and visual control tasks. With a touch screen, resting the arm increased movement time for steering tasks. When both performance and comfort are considered, whether to use a mouse or a touch screen for person-computer interaction depends on the steering difficulty. Hence, a input device should be chosen based on the application, and should be optimized to match the graphical user interface. © The Author(s) 2016.

  15. Self-testing through EPR-steering

    International Nuclear Information System (INIS)

    Šupić, Ivan; Hoban, Matty J

    2016-01-01

    The verification of quantum devices is an important aspect of quantum information, especially with the emergence of more advanced experimental implementations of quantum computation and secure communication. Within this, the theory of device-independent robust self-testing via Bell tests has reached a level of maturity now that many quantum states and measurements can be verified without direct access to the quantum systems: interaction with the devices is solely classical. However, the requirements for this robust level of verification are daunting and require high levels of experimental accuracy. In this paper we discuss the possibility of self-testing where we only have direct access to one part of the quantum device. This motivates the study of self-testing via EPR-steering, an intermediate form of entanglement verification between full state tomography and Bell tests. Quantum non-locality implies EPR-steering so results in the former can apply in the latter, but we ask what advantages may be gleaned from the latter over the former given that one can do partial state tomography? We show that in the case of self-testing a maximally entangled two-qubit state, or ebit, EPR-steering allows for simpler analysis and better error tolerance than in the case of full device-independence. On the other hand, this improvement is only a constant improvement and (up to constants) is the best one can hope for. Finally, we indicate that the main advantage in self-testing based on EPR-steering could be in the case of self-testing multi-partite quantum states and measurements. For example, it may be easier to establish a tensor product structure for a particular party’s Hilbert space even if we do not have access to their part of the global quantum system. (paper)

  16. The Transuranic Waste Program's integration and planning activities and the contributions of the TRU partnership

    International Nuclear Information System (INIS)

    Harms, T.C.; O'Neal, W.; Petersen, C.A.; McDonald, C.E.

    1994-02-01

    The Technical Support Division, EM-351 manages the integration and planning activities of the Transuranic Waste Program. The Transuranic Waste Program manager provides transuranic waste policy, guidance, and issue resolution to Headquarters and the Operations Offices. In addition, the program manager is responsible for developing and implementing an integrated, long-range waste management plan for the transuranic waste system. A steering committee, a core group of support contractors, and numerous interface working groups support the efforts of the program manager. This paper provides an overview of the US Department of Energy's transuranic waste integration activities and a long-range planning process that includes internal and external stakeholder participation. It discusses the contributions and benefits provided by the Transuranic Partnership, most significantly, the integration activities and the body of data collected and assembled by the Partnership

  17. Autonomous trajectory generation for mobile robots with non-holonomic and steering angle constraints

    International Nuclear Information System (INIS)

    Pin, F.G.; Vasseur, H.A.

    1990-01-01

    This paper presents an approach to the trajectory planning of mobile platforms characterized by non-holonomic constraints and constraints on the steering angle and steering angle rate. The approach is based on geometric reasoning and provides deterministic trajectories for all pairs of initial and final configurations (position x, y, and orientation θ) of the robot. Furthermore, the method generates trajectories taking into account the forward and reverse mode of motion of the vehicle, or combination of these when complex maneuvering is involved or when the environment is obstructed with obstacles. The trajectory planning algorithm is described, and examples of trajectories generated for a variety of environmental conditions are presented. The generation of the trajectories only takes a few milliseconds of run time on a micro Vax, making the approach quite attractive for use as a real-time motion planner for teleoperated or sensor-based autonomous vehicles in complex environments. 10 refs., 11 figs

  18. ESnet Program Plan 1994

    Energy Technology Data Exchange (ETDEWEB)

    Merola, S.

    1994-11-01

    This Program Plan characterizes ESnet with respect to the current and future needs of Energy Research programs for network infrastructure, services, and development. In doing so, this document articulates the vision and recommendations of the ESnet Steering Committee regarding ESnet`s development and its support of computer networking facilities and associated user services. To afford the reader a perspective from which to evaluate the ever-increasing utility of networking to the Energy Research community, we have also provided a historical overview of Energy Research networking. Networking has become an integral part of the work of DOE principal investigators, and this document is intended to assist the Office of Scientific Computing in ESnet program planning and management, including prioritization and funding. In particular, we identify the new directions that ESnet`s development and implementation will take over the course of the next several years. Our basic goal is to ensure that the networking requirements of the respective scientific programs within Energy Research are addressed fairly. The proliferation of regional networks and additional network-related initiatives by other Federal agencies is changing the process by which we plan our own efforts to serve the DOE community. ESnet provides the Energy Research community with access to many other peer-level networks and to a multitude of other interconnected network facilities. ESnet`s connectivity and relationship to these other networks and facilities are also described in this document. Major Office of Energy Research programs are managed and coordinated by the Office of Basic Energy Sciences, the Office of High Energy and Nuclear Physics, the Office of Magnetic Fusion Energy, the Office of Scientific Computing, and the Office of Health and Environmental Research. Summaries of these programs are presented, along with their functional and technical requirements for wide-area networking.

  19. ESnet Program Plan 1994

    International Nuclear Information System (INIS)

    Merola, S.

    1994-01-01

    This Program Plan characterizes ESnet with respect to the current and future needs of Energy Research programs for network infrastructure, services, and development. In doing so, this document articulates the vision and recommendations of the ESnet Steering Committee regarding ESnet's development and its support of computer networking facilities and associated user services. To afford the reader a perspective from which to evaluate the ever-increasing utility of networking to the Energy Research community, we have also provided a historical overview of Energy Research networking. Networking has become an integral part of the work of DOE principal investigators, and this document is intended to assist the Office of Scientific Computing in ESnet program planning and management, including prioritization and funding. In particular, we identify the new directions that ESnet's development and implementation will take over the course of the next several years. Our basic goal is to ensure that the networking requirements of the respective scientific programs within Energy Research are addressed fairly. The proliferation of regional networks and additional network-related initiatives by other Federal agencies is changing the process by which we plan our own efforts to serve the DOE community. ESnet provides the Energy Research community with access to many other peer-level networks and to a multitude of other interconnected network facilities. ESnet's connectivity and relationship to these other networks and facilities are also described in this document. Major Office of Energy Research programs are managed and coordinated by the Office of Basic Energy Sciences, the Office of High Energy and Nuclear Physics, the Office of Magnetic Fusion Energy, the Office of Scientific Computing, and the Office of Health and Environmental Research. Summaries of these programs are presented, along with their functional and technical requirements for wide-area networking

  20. Drug design based on x-ray diffraction and steered molecular dynamics

    Czech Academy of Sciences Publication Activity Database

    Hašek, Jindřich; Skálová, Tereza; Dohnálek, Jan; Dušková, Jarmila; Petroková, Hana; Vondráčková, Eva; Zimmermann, K.

    2005-01-01

    Roč. 12, č. 3 (2005), s. 208-210 ISSN 1211-5894. [VUFB Conference on Modern Methods in Synthesis and Analysis of Active Pharmaceutical Substances /5./. Praha, 23.11.2005-24.11.2005] R&D Projects: GA AV ČR KJB4050312 Institutional research plan: CEZ:AV0Z40500505 Keywords : drug design * X-ray diffraction * steered molecular dynamics Subject RIV: CF - Physical ; Theoretical Chemistry

  1. Research on Performance of Wire-controlled Hydraulic Steering System Based on Four-wheel Steering

    Science.gov (United States)

    Tao, P.; Jin, X. H.

    2018-05-01

    In this paper, the steering stability and control strategy of forklift are put forward. Drive based on yawing moment distribution of rotary torque coordination control method, through analyzing the linear two degree of freedom model of forklift truck, forklift yawing angular velocity and mass center side-slip Angle of expectations, as the control target parameters system, using fuzzy controller output driving forklift steering the yawing moment, to drive rotary torque distribution, make the forklift truck to drive horizontal pendulum angular velocity and side-slip Angle tracking reference model very well. In this paper, the lateral stability control system were designed, the joint simulation in MATLAB/Simulink, the simulation results show that under the different partial load, the control system can effectively to control side forklift lateral stability, enhanced the forklift driving safety, for the side forklift steering stability study provides a theoretical basis.

  2. Organizing Committee Advisory Committee 187

    Indian Academy of Sciences (India)

    Organizing Committee. V M Datar (Chairman). Bhabha Atomic Research Centre, Mumbai, India. D C Biswas (Convener). Bhabha Atomic Research Centre, Mumbai, India. K Mahata (Secretary). Bhabha Atomic Research Centre, Mumbai, India. Z Ahmed. Bhabha Atomic Research Centre, Mumbai, India. P V Bhagwat.

  3. Computer Security: Governmentwide Planning Process Had Limited Impact. Report to the Chairman, Committee on Science, Space, and Technology, House of Representatives.

    Science.gov (United States)

    General Accounting Office, Washington, DC. Information Management and Technology Div.

    As required by the Computer Security Act of 1987, federal agencies have to identify systems that contain sensitive information and develop plans to safeguard them. The planning process was assessed in 10 civilian agencies as well as the extent to which they had implemented planning controls described in 22 selected plans. The National Institute of…

  4. Standing Concertation Committee

    CERN Multimedia

    HR Department

    2009-01-01

    Ordinary Meeting on 11 May 2009 The meeting of the Standing Concertation Committee held on 11 May 2009 was entirely dedicated to the preparation of the TREF meeting on 19 & 20 May 2009. The Committee took note, discussed and agreed on some clarifications on a number of documents and presentations that the Management planned to submit and/or present to TREF on the following subjects: • Personnel statistics 2008: J. Purvis presented the Personnel Statistics for 2008 prepared by HR Department. In line with the previous year, key messages were firstly, a general reduction in staff (2544 to 2400, - 6%), secondly, a reduction in administrative services personnel (from 422 to 387, - 8%) and thirdly, a marked increase in the number of Users and Unpaid Associates (from 8369 to 9140, + 9%) • Five-Yearly Review 2010: A series of draft documents were submitted for discussion, comprising an introductory document explaining the statutory basis for the following four document...

  5. Working paper on public steering of privately owned sports facilities

    DEFF Research Database (Denmark)

    Iversen, Evald Bundgård

    This short paper discusses how municipalities can steer privately owned sports facilities. Firstly I analyse why steering of privately owned facilities is an interesting subject. Secondly I discuss what the advantages and drawbacks of using different approaches for steering sports facilities are........ Finally I discuss the methodological challenges of measuring activities in sports facilities – and take a closer look at the advantages and drawbacks of using manual and thermal techniques for registering activity.......This short paper discusses how municipalities can steer privately owned sports facilities. Firstly I analyse why steering of privately owned facilities is an interesting subject. Secondly I discuss what the advantages and drawbacks of using different approaches for steering sports facilities are...

  6. Steering Angle Function Algorithm of Morphing of Residential Area

    Directory of Open Access Journals (Sweden)

    XIE Tian

    2015-07-01

    Full Text Available A residential area feature morphing method based on steering angle function is presented. To residential area with the same representation under two different scales,transforming the representation of the residential area polygon from vector coordinates to steering angle function,then using the steering angle function to match,and finding out the similarity and the differences between the residential areas under different scale to get the steering angle function of the the residential areas under any middle scale,the final,transforming the middle scale steering angle function to vector coordinates form,and get the middle shape interpolation of the the residential area polygon.Experimental results show:the residential area morphing method by using steering angle function presented can realize the continuous multi-scale representation under the premise of keeping in shape for the residential area with the rectangular boundary features.

  7. Fusion Policy Advisory Committee (FPAC)

    International Nuclear Information System (INIS)

    1990-09-01

    This document is the final report of the Fusion Policy Advisory Committee. The report conveys the Committee's views on the matters specified by the Secretary in his charge and subsequent letters to the Committee, and also satisfies the provisions of Section 7 of the Magnetic Fusion Energy Engineering Act of 1980, Public Law 96-386, which require a triennial review of the conduct of the national Magnetic Fusion Energy program. Three sub-Committee's were established to address the large number of topics associated with fusion research and development. One considered magnetic fusion energy, a second considered inertial fusion energy, and the third considered issues common to both. For many reasons, the promise of nuclear fusion as a safe, environmentally benign, and affordable source of energy is bright. At the present state of knowledge, however, it is uncertain that this promise will become reality. Only a vigorous, well planned and well executed program of research and development will yield the needed information. The Committee recommends that the US commit to a plan that will resolve this critically important issue. It also outlines the first steps in a development process that will lead to a fusion Demonstration Power Plant by 2025. The recommended program is aggressive, but we believe the goal is reasonable and attainable. International collaboration at a significant level is an important element in the plan

  8. Fault-tolerant Actuator System for Electrical Steering of Vehicles

    DEFF Research Database (Denmark)

    Sørensen, Jesper Sandberg; Blanke, Mogens

    2006-01-01

    is needed that meets this requirement. This paper studies the fault-tolerance properties of an electrical steering system. It presents a fault-tolerant architecture where a dedicated AC motor design used in conjunction with cheap voltage measurements can ensure detection of all relevant faults......Being critical to the safety of vehicles, the steering system is required to maintain the vehicles ability to steer until it is brought to halt, should a fault occur. With electrical steering becoming a cost-effective candidate for electrical powered vehicles, a fault-tolerant architecture...

  9. Analysis of Vehicle Steering and Driving Bifurcation Characteristics

    Directory of Open Access Journals (Sweden)

    Xianbin Wang

    2015-01-01

    Full Text Available The typical method of vehicle steering bifurcation analysis is based on the nonlinear autonomous vehicle model deriving from the classic two degrees of freedom (2DOF linear vehicle model. This method usually neglects the driving effect on steering bifurcation characteristics. However, in the steering and driving combined conditions, the tyre under different driving conditions can provide different lateral force. The steering bifurcation mechanism without the driving effect is not able to fully reveal the vehicle steering and driving bifurcation characteristics. Aiming at the aforementioned problem, this paper analyzed the vehicle steering and driving bifurcation characteristics with the consideration of driving effect. Based on the 5DOF vehicle system dynamics model with the consideration of driving effect, the 7DOF autonomous system model was established. The vehicle steering and driving bifurcation dynamic characteristics were analyzed with different driving mode and driving torque. Taking the front-wheel-drive system as an example, the dynamic evolution process of steering and driving bifurcation was analyzed by phase space, system state variables, power spectral density, and Lyapunov index. The numerical recognition results of chaos were also provided. The research results show that the driving mode and driving torque have the obvious effect on steering and driving bifurcation characteristics.

  10. Stress indicators in steers at slaughtering

    Directory of Open Access Journals (Sweden)

    A. Zarrilli

    2010-04-01

    Full Text Available This work aimed to assess the blood modifications of some slaughtering-linked stress hormones in cattle subject to butcher standardized procedures. The blood samples of 20 Limousine 12-13 months old steers have been collected before slaughtering, during lairage, and after stunning by captive bolt gun, during exsanguination. The plasma level of epinephrine, norepinephrine, cortisol and beta-endorphin have been assayed by EIA. The data indicate that catecholamines, cortisol and beta-endorphin did not significantly increase after stunning in these animals.

  11. Steering assistance for backing up articulated vehicles

    Directory of Open Access Journals (Sweden)

    Dieter Zoebel

    2003-10-01

    Full Text Available Articulated vehicles belong to the category of nonholonomous wheelers. Under the aspect of control theory they require a sophisticated handling. This corresponds to the experience of unexercised drivers, for instance maneuvering a car and its caravan into a parking box. In this context some adequate advice for the right steering movements would give an appreciable assistance. Here a visual assistance is proposed and realized. The decisive advice for the driver is derived from kinematic modeling. The system is designed to be integrated into standard cars and trucks. For testing purposes the actual system has been incorporated into an existing backing up simulator.

  12. Asian Network for Education in Nuclear Technology (ANENT). Report of the 1. Coordination Committee meeting including the ANENT Terms of Reference and the Action Plan

    International Nuclear Information System (INIS)

    2007-01-01

    It was noted that ANENT activities have started and ANENT is operational. The following conclusions are made: 1. Member States representatives are encouraged to contact IAEA TC through their respective official channels to request support for ANENT as a Regional TC Project; 2. Member States are invited to consider hosting one of the next Coordination Committee meetings; 3. The further ANENT activities should take into account the fact that nuclear energy and nuclear applications play equally important roles in Asia; 4. Nuclear safety plays a very important role and is being addressed through the ANSN. The meeting encouraged that ANSN and ANENT work together for synergistic effects. It was agreed that a representative from MINT would take the role of spokesperson of ANENT until the next Coordination Committee meeting

  13. Study on control schemes of flexible steering system of a multi-axle all-wheel-steering robot

    Directory of Open Access Journals (Sweden)

    Pingxia Zhang

    2016-05-01

    Full Text Available It is well known that a multi-axle wheeled robot possesses larger load capability and also higher drive performance. However, its steering flexibility is degraded due to the large number of wheels. In order to solve this problem, in this article, we proposed three control schemes based on the center of rotation or the steering angles of both the first- and last-axle wheels. To release these control schemes, steering mode selection and also the left wheel’s steering angle in a specific axle are added approaching a practical application. Thereafter, the remaining wheels’ steering angles can be calculated with the Ackerman steering theorem. In order to verify the control effects, a five-axle all-wheel-steering wheeled robot has been developed with the Bluetooth wireless monitor system. Based on the newly designed robot, validation experiments are carried out, such as lateral movement, situ rotation, and multi-mode steering within a narrow space. The results indicate that the proposed design in this article can ensure a more flexible and faster movement within a narrow space. It shows large potential in obstacle avoidance compared with the conventional partial-wheel steering mode.

  14. Planning and Programming of Education and Training Courses on the Radiation Fusion Technologies for Next Generations

    International Nuclear Information System (INIS)

    Kim, Jin Kyu; Nam, Y. M.; Choi, P. H.

    2009-06-01

    In order to program education and training courses on the radiation technologies and to have the WNU RT School to be held in Korea, this project was carried out. It was also done to make a strategy for running the programmed courses, and to build and knit a global network among radiation specialists such as international advisory board, domestic advisory board and steering committee. A plan for the WNU RT School in Korea was made under this project. Curricula in all subjects related to radiation technology and the lecture materials were prepared, which are essential for education and training courses on radiation technologies for next generations. Lecturers were selected among global CEOs and professionals in radiation industries and university professors and radiation specialists. In addition, a global network among radiation specialists such as international advisory board, domestic advisory board and steering committee was built and organized. As a model for the international education and training courses in RT field as well as the other fields, it can be used for making fundamentals of technology exports and promoting Korea's national image in science and technology

  15. Standing Concertation Committee

    CERN Document Server

    HR Department

    2007-01-01

    ORDINARY MEETING ON 27 FEBRUARY 2007 The main items discussed at the meeting of the Standing Concertation Committee on 27 February 2007 included: Saved Leave Scheme (SLS): It was announced that a Management/Staff Association working group had been set up to discuss the Saved Leave Scheme (SLS): Members : M. Büttner, E. Chiaveri (chair), Ph. Defert, D. Klem, M. Vitasse, J.-M. Saint-Viteux. It was noted that the Staff Association was launching a questionnaire on SLS and distributed to all members of the personnel. Merit Recognition Guidelines: In the context of the new Merit Appraisal and Recognition Scheme (MARS), the committee took note of the CERN-wide 2007 Merit Recognition Guidelines, including the Frequently Asked Questions on HR Department's dedicated website. Information on CERN's medium and long-term plans (MTP-LTP)/Contract renewals/ External mobility The Committee took note of the information provided on CERN's MTP-LTP and of documentation distributed at the meeting by the Staff ...

  16. 77 FR 62242 - Risk Communication Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2012-10-12

    ...] Risk Communication Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS... Communication Advisory Committee. General Function of the Committee: To provide advice and recommendations to... Person: Lee L. Zwanziger, Risk Communication Staff, Office of Planning, Food and Drug Administration...

  17. 75 FR 20608 - Risk Communication Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2010-04-20

    ...] Risk Communication Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS... Communication Advisory Committee. General Function of the Committee: To provide advice and recommendations to... relevant to improving risk communication at FDA, and discuss applications or gaps for strategic planning of...

  18. Experimental nonlocal steering of Bohmian trajectories.

    Science.gov (United States)

    Xiao, Ya; Kedem, Yaron; Xu, Jin-Shi; Li, Chuan-Feng; Guo, Guang-Can

    2017-06-26

    Interpretations of quantum mechanics (QM), or proposals for underlying theories, that attempt to present a definite realist picture, such as Bohmian mechanics, require strong non-local effects. Naively, these effects would violate causality and contradict special relativity. However if the theory agrees with QM the violation cannot be observed directly. Here, we demonstrate experimentally such an effect: we steer the velocity and trajectory of a Bohmian particle using a remote measurement. We use a pair of photons and entangle the spatial transverse position of one with the polarization of the other. The first photon is sent to a double-slit-like apparatus, where its trajectory is measured using the technique of Weak Measurements. The other photon is projected to a linear polarization state. The choice of polarization state, and the result, steer the first photon in the most intuitive sense of the word. The effect is indeed shown to be dramatic, while being easy to visualize. We discuss its strength and what are the conditions for it to occur.

  19. Optimization Under Uncertainty for Wake Steering Strategies

    Energy Technology Data Exchange (ETDEWEB)

    Quick, Julian [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Annoni, Jennifer [National Renewable Energy Laboratory (NREL), Golden, CO (United States); King, Ryan N [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Dykes, Katherine L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Fleming, Paul A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ning, Andrew [Brigham Young University

    2017-08-03

    Offsetting turbines' yaw orientations from incoming wind is a powerful tool that may be leveraged to reduce undesirable wake effects on downstream turbines. First, we examine a simple two-turbine case to gain intuition as to how inflow direction uncertainty affects the optimal solution. The turbines are modeled with unidirectional inflow such that one turbine directly wakes the other, using ten rotor diameter spacing. We perform optimization under uncertainty (OUU) via a parameter sweep of the front turbine. The OUU solution generally prefers less steering. We then do this optimization for a 60-turbine wind farm with unidirectional inflow, varying the degree of inflow uncertainty and approaching this OUU problem by nesting a polynomial chaos expansion uncertainty quantification routine within an outer optimization. We examined how different levels of uncertainty in the inflow direction effect the ratio of the expected values of deterministic and OUU solutions for steering strategies in the large wind farm, assuming the directional uncertainty used to reach said OUU solution (this ratio is defined as the value of the stochastic solution or VSS).

  20. Steering healthcare service delivery: a regulatory perspective.

    Science.gov (United States)

    Prakash, Gyan

    2015-01-01

    The purpose of this paper is to explore regulation in India's healthcare sector and makes recommendations needed for enhancing the healthcare service. The literature was reviewed to understand healthcare's regulatory context. To understand the current healthcare system, qualitative data were collected from state-level officials, public and private hospital staff. A patient survey was performed to assess service quality (QoS). Regulation plays a central role in driving healthcare QoS. India needs to strengthen market and institutional co-production based approaches for steering its healthcare in which delivery processes are complex and pose different challenges. This study assesses current healthcare regulation in an Indian state and presents a framework for studying and strengthening regulation. Agile regulation should be based on service delivery issues (pull approach) rather than monitoring and sanctions based regulatory environment (push approach). Healthcare pitfalls across the world seem to follow similar follies. India's complexity and experience is useful for emerging and developed economies. The author reviewed around 70 publications and synthesised them in healthcare regulatory contexts. Patient's perception of private providers could be a key input towards steering regulation. Identifying gaps across QoS dimensions would be useful in taking corrective measures.

  1. The impact of force feedback level on steering performance

    NARCIS (Netherlands)

    Anand, S.; Terken, J.; Hogema, J.H.

    2013-01-01

    Steer-by-wire systems provide designers the ability to customize and personalize force feedback on the steering wheel, based on individual preferences. Earlier studies using subjective responses have shown that there are individual differences in preferences for force feedback. It has also been

  2. Revisiting path steering for 3D manipulation tasks

    NARCIS (Netherlands)

    L. Liu (Lei); J.-B. Martens; R. van Liere (Robert)

    2011-01-01

    htmlabstractThe law of path steering, as proposed by Accot and Zhai, describes a quantitative relationship between human temporal performance and the path spatial characteristics. The steering law is formulated as a continuous goal crossing task, in which a large number of goals are crossed along

  3. Revisiting path steering for 3D manipulation tasks

    NARCIS (Netherlands)

    L. Liu (Lei); J.-B. Martens; R. van Liere (Robert)

    2010-01-01

    htmlabstractThe law of path steering, as proposed by Accot and Zhai, describes a quantitative relationship between human temporal performance and the path spatial characteristics. The steering law is formulated as a continuous goal crossing task, in which a large number of goals are crossed along

  4. Evaluation of flexible endoscope steering using haptic guidance

    NARCIS (Netherlands)

    Reilink, Rob; Stramigioli, Stefano; Kappers, Astrid M L; Misra, Sarthak

    Background: Steering the tip of a flexible endoscope relies on the physician's dexterity and experience. For complex flexible endoscopes, conventional controls may be inadequate. Methods: A steering method based on a multi-degree-of-freedom haptic device is presented. Haptic cues are generated based

  5. Evaluation of flexible endoscope steering using haptic guidance

    NARCIS (Netherlands)

    Reilink, Rob; Stramigioli, Stefano; Kappers, Astrid M.L.; Misra, Sarthak

    2011-01-01

    Background - Steering the tip of a flexible endoscope relies on the physician’s dexterity and experience. For complex flexible endoscopes, conventional controls may be inadequate. Methods - A steering method based on a multi-degree-of-freedom haptic device is presented. Haptic cues are generated

  6. Local adaptation of the National Physical Activity Plan: creation of the Active Living Plan for a Healthier San Antonio.

    Science.gov (United States)

    Esparza, Laura A; Velasquez, Katherine S; Zaharoff, Annette M

    2014-03-01

    Physical inactivity and related health consequences are serious public health threats. Effective strategies to facilitate and support active-living opportunities must be implemented at national, state, and local levels. San Antonio, Texas, health department officials launched the Active Living Council of San Antonio (ALCSA) to engage the community in developing a 3- to 5-year plan to promote active living. A steering committee set preliminary ALCSA aims and established a multisector membership structure modeled after the US National Physical Activity Plan (NPAP). ALCSA adopted governance standards, increased knowledge of physical activity and health, and engaged in an 18-month collaborative master plan writing process. ALCSA selected overarching strategies and evidence-based strategies for each societal sector and adapted strategies to the local context, including tactics, measures of success, and timelines. Community and expert engagement led to a localized plan reflecting national recommendations, the Active Living Plan for a Healthier San Antonio. Multisector collaborations among governmental agencies and community organizations, which were successfully developed in this case to produce the first-ever local adaptation of the NPAP, require clearly defined expectations. Lessons learned in ALCSA's organizational and plan development can serve as a model for future community-driven efforts to increase active living.

  7. Research on Handling Stability of Steering-by-wire System

    Directory of Open Access Journals (Sweden)

    Yuan Ying

    2017-01-01

    Full Text Available The main function of steer-by-wire (SBW system are improving steering characteristics, security and stability of the vehicle. In this paper, the variable steering ratio of SBW system is analyzed, and the method of steering ratio based on fuzzy control and neural network are researched. In order to solve the actual working condition, the wheel angle may not reach the expected value, this paper establishes a twodegree-of-freedom (2-DOF vehicle model, and a Matlab/Simulink simulation model, in which a control strategy based on PID controller is put forward to control the front wheel steering angle. Simulation results show that proposed control strategy based on fuzzy neural network can effectively reduce lateral deviation and improve the handling stability and comfortability of the vehicle.

  8. Phase shifter for antenna beam steering

    Energy Technology Data Exchange (ETDEWEB)

    Jindal, Ravi, E-mail: rjindal21@gmail.com [Master’s(MS) in System Electronics and General Electrical, Ecole Polytechnique of university of Nantes France, IETR, Nantes (France); Razban, Tchanguiz, E-mail: tchanguiz.razban-haghighi@univ-nantes.fr [Electronics and Telecommunication Institute of Rennes (IETR-UMR 6164), Ecole Polytechnique of university of Nantes France, IETR, Nantes (France)

    2016-03-09

    Wide band Array Antenna operates in Ku-band (10.7-12.7 GHz) frequency composed of N×N radiating elements. This antenna aims at the reception of television satellite signals. The goal of this research is to provide better possibility of electronic beam control instead of manual or mechanical control, and design compact and low cost phase shifters to be inserted in the feeding network of this antenna. The electronic control of the phase shifter will allow the control of beam steering. The emphasis of this project will be done at the beginning on the design of a good phase shifter in Ku band. The aim of this research is to define, simulate, release and measure a continuous phase shifter. Better reflection loss, low transmission loss, low Cost of array antennas, large range of phase-shifter, phase flatness and bandwidth will be achieved by providing better gain.

  9. Phase shifter for antenna beam steering

    International Nuclear Information System (INIS)

    Jindal, Ravi; Razban, Tchanguiz

    2016-01-01

    Wide band Array Antenna operates in Ku-band (10.7-12.7 GHz) frequency composed of N×N radiating elements. This antenna aims at the reception of television satellite signals. The goal of this research is to provide better possibility of electronic beam control instead of manual or mechanical control, and design compact and low cost phase shifters to be inserted in the feeding network of this antenna. The electronic control of the phase shifter will allow the control of beam steering. The emphasis of this project will be done at the beginning on the design of a good phase shifter in Ku band. The aim of this research is to define, simulate, release and measure a continuous phase shifter. Better reflection loss, low transmission loss, low Cost of array antennas, large range of phase-shifter, phase flatness and bandwidth will be achieved by providing better gain.

  10. Needle-tissue interactive mechanism and steering control in image-guided robot-assisted minimally invasive surgery: a review.

    Science.gov (United States)

    Li, Pan; Yang, Zhiyong; Jiang, Shan

    2018-06-01

    Image-guided robot-assisted minimally invasive surgery is an important medicine procedure used for biopsy or local target therapy. In order to reach the target region not accessible using traditional techniques, long and thin flexible needles are inserted into the soft tissue which has large deformation and nonlinear characteristics. However, the detection results and therapeutic effect are directly influenced by the targeting accuracy of needle steering. For this reason, the needle-tissue interactive mechanism, path planning, and steering control are investigated in this review by searching literatures in the last 10 years, which results in a comprehensive overview of the existing techniques with the main accomplishments, limitations, and recommendations. Through comprehensive analyses, surgical simulation for insertion into multi-layer inhomogeneous tissue is verified as a primary and propositional aspect to be explored, which accurately predicts the nonlinear needle deflection and tissue deformation. Investigation of the path planning of flexible needles is recommended to an anatomical or a deformable environment which has characteristics of the tissue deformation. Nonholonomic modeling combined with duty-cycled spinning for needle steering, which tracks the tip position in real time and compensates for the deviation error, is recommended as a future research focus in the steering control in anatomical and deformable environments. Graphical abstract a Insertion force when the needle is inserted into soft tissue. b Needle deflection model when the needle is inserted into soft tissue [68]. c Path planning in anatomical environments [92]. d Duty-cycled spinning incorporated in nonholonomic needle steering [64].

  11. Retrospective Review of Pectoralis Major Ruptures in Rodeo Steer Wrestlers

    Directory of Open Access Journals (Sweden)

    Breda H. F. Lau

    2013-01-01

    Full Text Available Background. Pectoralis major tendon ruptures have been reported in the literature as occupational injuries, accidental injuries, and sporting activities. Few cases have been reported with respect to rodeo activities. Purpose. To describe a series of PM tendon ruptures in professional steer wrestlers. Study Design. Case series, level of evidence, 4. Methods. A retrospective analysis of PM ruptures in a steer wrestling cohort was performed. Injury data between 1992 and 2008 were reviewed using medical records from the University of Calgary Sport Medicine Center. Results. Nine cases of pectoralis major ruptures in professional steer wrestlers were identified. Injuries occurred during the throwing phase of the steer or while breaking a fall. All athletes reported unexpected or abnormal behavior of the steer that contributed to the mechanism of injury. Seven cases were surgically repaired, while two cases opted for nonsurgical intervention. Eight cases reported successful return to competition following the injury. Conclusion. Steer wrestlers represent a unique cohort of PM rupture case studies. Steer wrestling is a demanding sport that involves throwing maneuvers that may predispose the muscle to rupture. All cases demonstrated good functional outcomes regardless of surgical or non-surgical treatment.

  12. Directional control-response compatibility of joystick steered shuttle cars.

    Science.gov (United States)

    Burgess-Limerick, Robin; Zupanc, Christine M; Wallis, Guy

    2012-01-01

    Shuttle cars are an unusual class of vehicle operated in underground coal mines, sometimes in close proximity to pedestrians and steering errors may have very serious consequences. A directional control-response incompatibility has previously been described in shuttle cars which are controlled using a steering wheel oriented perpendicular to the direction of travel. Some other shuttle car operators are seated perpendicular to the direction of travel and steer the car via a seat mounted joystick. A virtual simulation was utilised to determine whether the steering arrangement in these vehicles maintains directional control-response compatibility. Twenty-four participants were randomly assigned to either a condition corresponding to this design (consistent direction), or a condition in which the directional steering response was reversed while driving in-bye (visual field compatible). Significantly less accurate steering performance was exhibited by the consistent direction group during the in-bye trials only. Shuttle cars which provide the joystick steering mechanism described here require operators to accommodate alternating compatible and incompatible directional control-response relationships with each change of car direction. A virtual simulation of an underground coal shuttle car demonstrates that the design incorporates a directional control-response incompatibility when driving the vehicle in one direction. This design increases the probability of operator error, with potential adverse safety and productivity consequences.

  13. A mathematical model for predicting lane changes using the steering wheel angle.

    Science.gov (United States)

    Schmidt, Kim; Beggiato, Matthias; Hoffmann, Karl Heinz; Krems, Josef F

    2014-06-01

    Positive safety effects of advanced driver assistance systems can only become effective if drivers accept and use these systems. Early detection of driver's intention would allow for selective system activation and therefore reduce false alarms. This driving simulator study aims at exploring early predictors of lane changes. In total, 3111 lane changes of 51 participants on a simulated highway track were analyzed. Results show that drivers stopped their engagement in a secondary task about 7s before crossing the lane, which indicates a first planning phase of the maneuver. Subsequently, drivers start moving toward the lane, marking a mean steering wheel angle of 2.5°. Steering wheel angle as a directly measurable vehicle parameter appears as a promising early predictor of a lane change. A mathematical model of the steering wheel angle is presented, which is supposed to contribute for predicting lane change maneuvers. The mathematical model will be part of a further predictor of lane changes. This predictor can be a new advanced driver assistance system able to recognize a driver's intention. With this knowledge, other systems can be activated or deactivated so drivers get no annoying and exhausting alarm signals. This is one way how we can increase the acceptance of assistance systems. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Power-Production Diagnostic Tools for Low-Density Wind Farms with Applications to Wake Steering

    Science.gov (United States)

    Takle, E. S.; Herzmann, D.; Rajewski, D. A.; Lundquist, J. K.; Rhodes, M. E.

    2016-12-01

    Hansen (2011) provided guidelines for wind farm wake analysis with applications to "high density" wind farms (where average distance between turbines is less than ten times rotor diameter). For "low-density" (average distance greater than fifteen times rotor diameter) wind farms, or sections of wind farms we demonstrate simpler sorting and visualization tools that reveal wake interactions and opportunities for wind farm power prediction and wake steering. SCADA data from a segment of a large mid-continent wind farm, together with surface flux measurements and lidar data are subjected to analysis and visualization of wake interactions. A time-history animated visualization of a plan view of power level of individual turbines provides a quick analysis of wake interaction dynamics. Yaw-based sectoral histograms of enhancement/decline of wind speed and power from wind farm reference levels reveals angular width of wake interactions and identifies the turbine(s) responsible for the power reduction. Concurrent surface flux measurements within the wind farm allowed us to evaluate stability influence on wake loss. A one-season climatology is used to identify high-priority candidates for wake steering based on estimated power recovery. Typical clearing prices on the day-ahead market are used to estimate the added value of wake steering. Current research is exploring options for identifying candidate locations for wind farm "build-in" in existing low-density wind farms.

  15. 77 FR 65000 - Drug Safety and Risk Management Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2012-10-24

    ...] Drug Safety and Risk Management Advisory Committee; Notice of Meeting AGENCY: Food and Drug...: Drug Safety and Risk Management Advisory Committee. General Function of the Committee: To provide... Use (ETASU) before CDER's Drug Safety and Risk Management Advisory Committee (DSaRM). The Agency plans...

  16. Multiquantum well beam-steering device for laser satellite communication

    Science.gov (United States)

    Lahat, Roee; Levy, Itamar; Shlomi, Arnon

    2002-01-01

    With the increasing interest in laser satellite communications, new methods are sought to solve the existing problems of accurate and rapid laser beam deflection. Current solutions in the form of galvanometers or piezo fast steering mirrors with one or two degrees of freedom are bulky, power-consuming and slow. The Multi-Quantum Well (MQW) is a semiconductor device with unique potential to steer laser beams without any moving parts. We have conducted a preliminary evaluation of the potential application of the MQW as a laser beam-steering device for laser satellite communication, examining the performance of critical parameters for this type of communications.

  17. Nuclear Safety Research Review Committee

    International Nuclear Information System (INIS)

    Todreas, N.E.

    1990-01-01

    The Nuclear Safety Research Review Committee has had a fundamental difficulty because of the atmosphere that has existed since it was created. It came into existence at a time of decreasing budgets. For any Committee the easiest thing is to tell the Director what additional to do. That does not really help him a lot in this atmosphere of reduced budgets which he reviewed for you on Monday. Concurrently the research arm of Nuclear Regulatory Commission has recognized that the scope of its activity needed to be increased rather than decreased. In the last two-and-a-half-year period, human factors work was reinstated, radiation and health effects investigations were reinvigorated, research in the waste area was given significant acceleration. Further, accident management came into being, and the NRC finally got back into the TMI-2 area. So with all of those activities being added to the program at the same time that the research budget was going down, the situation has become very strained. What that leads to regarding Committee membership is a need for technically competent generalists who will be able to sit as the Division Directors come in, as the contractors come in, and sort the wheat from the chaff. The Committee needs people who are interested in and have a broad perspective on what regulatory needs are and specifically how safety research activities can contribute to them. The author summarizes the history of the Committee, the current status, and plans for the future

  18. Fundamental X-mode electron cyclotron current drive using remote-steering symmetric direction antenna at larger steering angles

    International Nuclear Information System (INIS)

    Idei, H.; Hanada, K.; Zushi, H.; Sato, K.N.; Sakamoto, M.; Iyomasa, A.; Kawasaki, S.; Nakashima, H.; Higashijima, A.; Ohkubo, K.; Kubo, S.; Shimozuma, T.; Ito, S.; Hasegawa, M.; Nakamura, K.; Notake, T.; Hoshika, H.; Maezono, N.; Nishi, S.; Nakashima, K.

    2005-01-01

    A remote steering antenna has been newly developed for Electron Cyclotron Heating and Current Drive (ECH/ECCD) experiments on the TRIAM-1M tokamak. It is a first application of the remote steering antenna to the ECH/ECCD experiments under the conditions relevant to International Thermonuclear Experimental Reactor. Our launcher is a symmetric direction antenna with extended steering capability. The larger steering angles of 8-19 degrees are available, in addition to that near 0 degree. The output beam from the antenna is the well-defined Gaussian beam with a correct steering angle. The Gaussian content and the steering angle accuracy are 0.85 and -0.3 degrees, respectively. Antenna transmission efficiency in the high power test is evaluated as 0.95. The efficiencies at the low and high power tests are consistent with those in the calculation with higher-order modes. The difference between plasma currents increased at co- and counter-steering injections [+/-19 degrees] is clearly observed in the superposition to the Lower Hybrid Current Driven (LHCD) plasma of the fundamental X-mode injection. (author)

  19. 46 CFR 196.37-33 - Instructions for changing steering gear.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Instructions for changing steering gear. 196.37-33... steering gear. (a) Instructions in at least 1/2 inch letters and figures shall be posted in the steering engineroom, relating in order, the different steps to be taken in changing to the emergency steering gear...

  20. 46 CFR 58.25-10 - Main and auxiliary steering gear.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Main and auxiliary steering gear. 58.25-10 Section 58.25... AUXILIARY MACHINERY AND RELATED SYSTEMS Steering Gear § 58.25-10 Main and auxiliary steering gear. (a) Power-operated main and auxiliary steering gear must be separate systems that are independent throughout their...

  1. The relationship between the audit committee

    Directory of Open Access Journals (Sweden)

    Emilia VASILE

    2016-05-01

    Because of the importance of communication between the internal auditors and the audit committee, the paper addresses issues such as planning discussions with internal auditors, analysis and conclusions as a result of communication, questionnaire models for the addressed areas and planning the meetings with external auditors.

  2. Strong Einstein-Podolsky-Rosen steering with unconditional entangled states

    Science.gov (United States)

    Steinlechner, Sebastian; Bauchrowitz, Jöran; Eberle, Tobias; Schnabel, Roman

    2013-02-01

    In 1935 Schrödinger introduced the terms entanglement and steering in the context of the famous gedanken experiment discussed by Einstein, Podolsky, and Rosen (EPR). Here, we report on a sixfold increase of the observed EPR-steering effect with regard to previous experiments, as quantified by the Reid criterion. We achieved an unprecedented low conditional variance product of about 0.04<1, where 1 is the upper bound below which steering is demonstrated. The steering effect was observed on an unconditional two-mode-squeezed entangled state that contained a total vacuum state contribution of less than 8%, including detection imperfections. Together with the achieved high interference contrast between the entangled state and a bright coherent laser field, our state is compatible with efficient applications in high-power laser interferometers and fiber-based networks for entanglement distribution.

  3. A Parallel and Distributed Surrogate Model Implementation for Computational Steering

    KAUST Repository

    Butnaru, Daniel; Buse, Gerrit; Pfluger, Dirk

    2012-01-01

    of the input parameters. Such an exploration process is however not possible if the simulation is computationally too expensive. For these cases we present in this paper a scalable computational steering approach utilizing a fast surrogate model as substitute

  4. Real-Time Application Performance Steering and Adaptive Control

    National Research Council Canada - National Science Library

    Reed, Daniel

    2002-01-01

    .... The objective of the Real-time Application Performance Steering and Adaptive Control project is to replace ad hoc, post-mortem performance optimization with an extensible, portable, and distributed...

  5. DSP-based electric power assisted steering using BLDC motor

    Indian Academy of Sciences (India)

    Bharat Electronics Limited, Nandambakkam, Chennai 600 089 e-mail: ... engine speed sensor, vehicle speed sensor, steering column, torsion bar and electronic control unit. Figure 1. .... IEEE Trans. on Industry Application 26(6):. 1144–1157.

  6. STANDING CONCERTATION COMMITTEE

    CERN Multimedia

    2003-01-01

    ORDINARY MEETING ON 29 SEPTEMBER 2003 Original: English This meeting was devoted to the main topics summarised below. 1 Follow-up from the meetings of TREF and the Finance Committee in September 2003 The last meeting of TREF had been devoted to presentations and clarifications on the 5-Yearly Review process. The content and planning of the 2005 Review are matters for the next Management, which will be presented to TREF next year. Underlining that due account has to be taken of the limited resources available to conduct such an exercise, the Staff Association stated that it looks forward to the concertation process at the SCC in preparing the next 5-Yearly Review to define an optimum set of topics in order to ensure that CERN can attract, retain and motivate the personnel that it needs to remain a centre of excellence. The Chairman of the SCC recalled that an information document on the Cost-Variation Index for 2004 had been transmitted to the Finance Committee last September and that complete information o...

  7. Calculation of the beam injector steering system using Helmholtz coils

    International Nuclear Information System (INIS)

    Passaro, A.; Sircilli Neto, F.; Migliano, A.C.C.

    1991-03-01

    In this work, a preliminary evaluation of the beam injector steering system of the IEAv electron linac is presented. From the existing injector configuration and with the assumptions of monoenergetic beam (100 keV) and uniform magnetic field, two pairs of Helmholtz coils were calculated for the steering system. Excitations of 105 A.turn and 37 A.turn were determined for the first and second coils, respectively. (author)

  8. Activities of the research committee

    Energy Technology Data Exchange (ETDEWEB)

    Hasegawa, A.; Shirai, T.; Nakagawa, M.; Osugi, T.; Ikeda, Y.; Ishida, T.; Shimazaki, J. [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2000-01-01

    The department of Nuclear Energy System serves as a secretarial of the following four research committees organized by JAERI; Japanese Nuclear Data Committee, Atomic and Molecular Data Research Committee, Research Committee on Reactor Physics and Research Committee on Marine Reactors. The purpose and the expected task of each committee are summarized here. The detailed activities of each committee are presented in this paper. (author)

  9. "Intelligent" Automatic Beam Steering and Shaping

    CERN Document Server

    Jansson, A

    2000-01-01

    The strategy for Automated Beam Steering and Shaping (ABS) in the PS complex is to use theoretical response matrices calculated from an optics database. The main reason for this is that it enforces a certain understanding of the machine optics. A drawback is that the validation of such a matrix can be a lengthy process. However, every time a correction is made using an ABS program, a partial measurement of the response matrix is effectively performed. Since the ABS programs are very frequently used, the full matrices could thus be measured on an almost daily basis, provided this information is retained. The information can be used in two ways. Either the program passively logs the data to be analysed off­line, or the information is directly fed back to the matrix, which makes the program 'learn' as it executes. The data logging provides a powerful machine debugging tool, since deviations between the measured and theoretical matrices can be traced back to incorrect optical parameters. The 'learning' mode ensu...

  10. Computational steering of GEM based detector simulations

    Science.gov (United States)

    Sheharyar, Ali; Bouhali, Othmane

    2017-10-01

    Gas based detector R&D relies heavily on full simulation of detectors and their optimization before final prototypes can be built and tested. These simulations in particular those with complex scenarios such as those involving high detector voltages or gas with larger gains are computationally intensive may take several days or weeks to complete. These long-running simulations usually run on the high-performance computers in batch mode. If the results lead to unexpected behavior, then the simulation might be rerun with different parameters. However, the simulations (or jobs) may have to wait in a queue until they get a chance to run again because the supercomputer is a shared resource that maintains a queue of other user programs as well and executes them as time and priorities permit. It may result in inefficient resource utilization and increase in the turnaround time for the scientific experiment. To overcome this issue, the monitoring of the behavior of a simulation, while it is running (or live), is essential. In this work, we employ the computational steering technique by coupling the detector simulations with a visualization package named VisIt to enable the exploration of the live data as it is produced by the simulation.

  11. Applications of EPR steering in quantum teleportation and NOON states

    Science.gov (United States)

    Zárate, Laura Rosales

    2018-04-01

    Einstein-Podolsky-Rosen (EPR) steering refers to the type of correlations described in the EPR paradox, where one observer seems to affect ("steer") the state of other observer by using local measurements. There have been several works regarding characterization and quantification of EPR steering. One characteristic of this non-local correlation is that it can be asymmetric, while entanglement is symmetric. This asymmetric property is relevant for potential applications of EPR steering to quantum information, in particular to quantum cryptography and quantum teleportation. This latter refers to the process where one observer sends an unknown quantum state to Bob, who is in a different location. They communicate by classical means. Here we will show that EPR steering is a necessary resource to obtain secure continuous variable teleportation. We will also consider NOON states, which is an example of an entangled state. For this state, we will present a steering signature. This contribution reviews the work derived in Refs. [1] and [2], which was presented as an invited talk in ELAF 2017.

  12. Optimization Under Uncertainty for Wake Steering Strategies: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Quick, Julian [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Annoni, Jennifer [National Renewable Energy Laboratory (NREL), Golden, CO (United States); King, Ryan N [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Dykes, Katherine L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Fleming, Paul A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ning, Andrew [Brigham Young University

    2017-05-01

    Wind turbines in a wind power plant experience significant power losses because of aerodynamic interactions between turbines. One control strategy to reduce these losses is known as 'wake steering,' in which upstream turbines are yawed to direct wakes away from downstream turbines. Previous wake steering research has assumed perfect information, however, there can be significant uncertainty in many aspects of the problem, including wind inflow and various turbine measurements. Uncertainty has significant implications for performance of wake steering strategies. Consequently, the authors formulate and solve an optimization under uncertainty (OUU) problem for finding optimal wake steering strategies in the presence of yaw angle uncertainty. The OUU wake steering strategy is demonstrated on a two-turbine test case and on the utility-scale, offshore Princess Amalia Wind Farm. When we accounted for yaw angle uncertainty in the Princess Amalia Wind Farm case, inflow-direction-specific OUU solutions produced between 0% and 1.4% more power than the deterministically optimized steering strategies, resulting in an overall annual average improvement of 0.2%. More importantly, the deterministic optimization is expected to perform worse and with more downside risk than the OUU result when realistic uncertainty is taken into account. Additionally, the OUU solution produces fewer extreme yaw situations than the deterministic solution.

  13. Creation of quantum steering by interaction with a common bath

    Science.gov (United States)

    Sun, Zhe; Xu, Xiao-Qiang; Liu, Bo

    2018-05-01

    By applying the hierarchy equation method, we computationally study the creation of quantum steering in a two-qubit system interacting with a common bosonic bath. The calculation does not adopt conventional approximate approaches, such as the Born, Markov, rotating-wave, and other perturbative approximations. Three kinds of quantum steering, i.e., Einstein-Podolsky-Rosen steering (EPRS), temporal steering (TS), and spatiotemporal steering (STS), are considered. Since the initial state of the two qubits is chosen as a product state, there does not exist EPRS at the beginning. During the evolution, we find that STS as well as EPRS are generated at the same time. An inversion relationship between STS and TS is revealed. By varying the system-bath coupling strength from weak to ultrastrong regimes, we find the nonmonotonic dependence of STS, TS, and EPRS on the coupling strength. It is interesting to study the dynamics of the three kinds of quantum steering by using an exactly numerical method, which is not considered in previous researches.

  14. Australasian Resuscitation In Sepsis Evaluation trial statistical analysis plan.

    Science.gov (United States)

    Delaney, Anthony; Peake, Sandra L; Bellomo, Rinaldo; Cameron, Peter; Holdgate, Anna; Howe, Belinda; Higgins, Alisa; Presneill, Jeffrey; Webb, Steve

    2013-10-01

    The Australasian Resuscitation In Sepsis Evaluation (ARISE) study is an international, multicentre, randomised, controlled trial designed to evaluate the effectiveness of early goal-directed therapy compared with standard care for patients presenting to the ED with severe sepsis. In keeping with current practice, and taking into considerations aspects of trial design and reporting specific to non-pharmacologic interventions, this document outlines the principles and methods for analysing and reporting the trial results. The document is prepared prior to completion of recruitment into the ARISE study, without knowledge of the results of the interim analysis conducted by the data safety and monitoring committee and prior to completion of the two related international studies. The statistical analysis plan was designed by the ARISE chief investigators, and reviewed and approved by the ARISE steering committee. The data collected by the research team as specified in the study protocol, and detailed in the study case report form were reviewed. Information related to baseline characteristics, characteristics of delivery of the trial interventions, details of resuscitation and other related therapies, and other relevant data are described with appropriate comparisons between groups. The primary, secondary and tertiary outcomes for the study are defined, with description of the planned statistical analyses. A statistical analysis plan was developed, along with a trial profile, mock-up tables and figures. A plan for presenting baseline characteristics, microbiological and antibiotic therapy, details of the interventions, processes of care and concomitant therapies, along with adverse events are described. The primary, secondary and tertiary outcomes are described along with identification of subgroups to be analysed. A statistical analysis plan for the ARISE study has been developed, and is available in the public domain, prior to the completion of recruitment into the

  15. Marijuana and Health. Report of a Study by a Committee of the Institute of Medicine, Division of Health Sciences Policy.

    Science.gov (United States)

    Institute of Medicine (NAS), Washington, DC.

    This report, written for the general public, presents the results of a 15-month study of the health-related effects of marijuana. The introduction describes the goals and procedure for the study, including the composition of the 22-member steering committee and its functions, and the sources of information used for the study, i.e., published…

  16. Measuring inconsistency in research ethics committee review

    OpenAIRE

    Trace, Samantha; Kolstoe, Simon Erik

    2017-01-01

    Background The review of human participant research by Research Ethics Committees (RECs) or Institutional Review Boards (IRBs) is a complex multi-faceted process that cannot be reduced to an algorithm. However, this does not give RECs/ IRBs permission to be inconsistent in their specific requirements to researchers or in their final opinions. In England the Health Research Authority (HRA) coordinates 67 committees, and has adopted a consistency improvement plan including a process called “Sha...

  17. 77 FR 19179 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-03-30

    ...: 8:30 a.m.-3:30 p.m. 1. ETRAC Committee Business. 2. Nanotechnology--Nanocoated Materials. 3. Science and Engineering Indicators. 4. ETRAC Committee Discussion. 5. Planning for Next Meeting. The open...

  18. 78 FR 12799 - Advisory Committee for Innovation Corps; Notice of Meeting; Correction

    Science.gov (United States)

    2013-02-25

    ... announcing a meeting of the Advisory Committee for Innovation Corps. The location and time of the business meeting are updated to reflect the accurate plans. In accordance with the Federal Advisory Committee Act...

  19. The pediatrician's role in development and implementation of an Individual Education Plan (IEP) and/or an Individual Family Service Plan (IFSP). American Academy of Pediatrics. Committee on Children with Disabilities.

    Science.gov (United States)

    1999-07-01

    The Individual Education Plan and Individual Family Service Plan are legally mandated documents developed by a multidisciplinary team assessment that specifies goals and services for each child eligible for special educational services or early intervention services. Pediatricians need to be knowledgeable of federal, state, and local requirements; establish linkages with early intervention, educational professionals, and parent support groups; and collaborate with the team working with individual children.

  20. The Audit Committee. AGB Effective Committee Series

    Science.gov (United States)

    Staisloff, Richard L.

    2011-01-01

    This publication is part of an Association of Governing Boards of Universities and Colleges (AGB) series devoted to strengthening the role of key standing committees of governing boards. While there is no optimum committee system for institutions of higher education, certain principles, practices, and procedures prevail. The best practices…

  1. The Investment Committee. Effective Committees. Board Basics.

    Science.gov (United States)

    Biggs, John H.

    1997-01-01

    The investment committee of the college or university governing board is charged with determining, overseeing, and assessing the policies and processes by which institutional funds are invested. The committee has fiduciary duty to ensure that the terms of investment of donors' gifts are met and to maximize investment returns within an appropriate…

  2. BEAMLINE-CONTROLLED STEERING OF SOURCE-POINT ANGLE AT THE ADVANCED PHOTON SOURCE

    Energy Technology Data Exchange (ETDEWEB)

    Emery, L.; Fystro, G.; Shang, H.; Smith, M.

    2017-06-25

    An EPICS-based steering software system has been implemented for beamline personnel to directly steer the angle of the synchrotron radiation sources at the Advanced Photon Source. A script running on a workstation monitors "start steering" beamline EPICS records, and effects a steering given by the value of the "angle request" EPICS record. The new system makes the steering process much faster than before, although the older steering protocols can still be used. The robustness features of the original steering remain. Feedback messages are provided to the beamlines and the accelerator operators. Underpinning this new steering protocol is the recent refinement of the global orbit feedback process whereby feedforward of dipole corrector set points and orbit set points are used to create a local steering bump in a rapid and seamless way.

  3. Advisory Committee Handbook.

    Science.gov (United States)

    Black Hawk Coll., Moline, IL.

    An advisory committee is generally comprised of persons outside the education profession who have specialized knowledge in a given area. The committee advises, makes recommendations, and gives service to the college and its students, instructors, and administrators. At Black Hawk College, there are four types of advisory committees: community,…

  4. 78 FR 59662 - Annual Public Meeting of the Interagency Steering Committee on Multimedia Environmental Modeling

    Science.gov (United States)

    2013-09-27

    ... making''. The topics to be discussed focus on: (1) Citizen science, crowd sourcing, and social media; (2... activities and their initiatives for the upcoming year, and to discuss technological advancements in.... NRC security on the sixth floor and bring two photo IDs. Direct access to the meeting room is on the...

  5. 77 FR 14528 - Preparation for International Conference on Harmonization Steering Committee and Expert Working...

    Science.gov (United States)

    2012-03-12

    ... Center, the Great Room (rm. 1503), Silver Spring, MD 20993. Information regarding visitor parking and... meeting will be made available on the Internet at http://www.fda.gov/Drugs/NewsEvents/ucm291624.htm...

  6. 76 FR 20690 - Preparation for International Conference on Harmonization Steering Committee and Expert Working...

    Science.gov (United States)

    2011-04-13

    ... ICH sponsors are the European Commission; the European Federation of Pharmaceutical Industries... Pharmaceutical Research and Manufacturers of America. The ICH Secretariat, which coordinates the preparation of.../industry project to improve, through harmonization, the efficiency of the process for developing and...

  7. 75 FR 57803 - Preparation for International Conference on Harmonisation Steering Committee and Expert Working...

    Science.gov (United States)

    2010-09-22

    ... the European Commission; the European Federation of Pharmaceutical Industries Associations; the... Pharmaceutical Research and Manufacturers of America. The ICH Secretariat, which coordinates the preparation of... ICH was established in 1990 as a joint regulatory/industry project to improve, through harmonization...

  8. 75 FR 18848 - Preparation for International Conference on Harmonisation Steering Committee and Expert Working...

    Science.gov (United States)

    2010-04-13

    ... of Pharmaceutical Industries Associations; the Japanese Ministry of Health, Labor and Welfare; the... Biologics Evaluation and Research, FDA; and the Pharmaceutical Research and Manufacturers of America. The... joint regulatory/industry project to improve, through harmonization, the efficiency of the process for...

  9. Electric Power Research Institute, Environmental Control Technology Center report to the steering committee. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    Operations and maintenance continued this month at the Electric Power Research Institute`s Environmental Control Technology Center. Testing on the 4.0 MW Pilot Wet FGD unit continued with the Pilot High Velocity FGD (PHV) and the Trace Element Removal (TER) test blocks. In the High Velocity test block, SO{sub 2} removal and mist eliminator carryover rates were investigated while operating the absorber unit with various spray nozzle types and vertical mist eliminator sections. During the Trace Element Removal test block, the mercury measurements and control studies involving the EPA Method 29 continued with testing of several impinger capture solutions, and the use of activated carbon injection across the Pulse-Jet Fabric Filter (PJFF) unit. The 4.0 MW Spray Dryer Absorber System was utilized this month in the TER test configuration to inject and transfer activated carbon to the PJFF bags for downstream mercury capture. Work also began in December to prepare the 0.4 MW Mini-Pilot Absorber system for receipt of the B and W Condensing Heat Exchanger (CHX) unit to be used in the 1996 DOE/PRDA testing. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit remained in cold-standby this month.

  10. Electric Power Research Institute: Environmental Technology Control Center, report to the Steering committee. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    This report describes test for air pollution control of flue gas and mercury as a result of coal combustion. The NYSEG Kintigh Station provided flue gas to the Center 100% of the time during this performance period. As the Kintigh Station operated with a variety of coals, fluctuations in the Center`s inlet SO{sub 2} concentrations were experienced. Safety training for the month was conducted by the O&M Superintendent, Maintenance Supervisor and Shift Supervisors. {open_quotes}Personal Protective Equipment{close_quotes} was the topic of the month. Inspections of the ECTC Facility and safety equipment (SCR air-packs, fire extinguishers, etc.) were completed and recorded this month. All systems were found to be in good condition. By continuing to emphasize safe work habits at the Center, we have raised the total number of days without a lost time injury to 1426 as of 4/30/96. The monthly safety meeting with the NYSEG Kintigh Station was held on April 30, 1996 with both NYSEG and ECTC representatives. The topics of discussion included an overview of NYSEG`s upcoming alternate fuel burn, an update on plant staffing changes, and a discussion of future safety training activities.

  11. Electric Power Research Institute Environmental Control Technology Center: Report to the Steering Committee, June 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    Operations and maintenance continued this month at the Electric Power Research Institute`s (EPRI`s) Environmental Control Technology Center (ECTC). Testing for the Hazardous Air Pollutant (HAP) test block was conducted using the 4.0 MW Spray Dryer Absorber System (SDA) and Pulse Jet Fabric Filter (PJFF) - Carbon Injection System. Investigations also continued across the B&W/CHX Heat Exchanger unit, while the 1.0 MW Selective Catalytic Reduction (SCR) unit remained idle this month in a cold-standby mode as monthly inspections were conducted. Pilot Testing Highlights Testing efforts in June were focused on the HAP test block and the Trace Elements Removal (TER) test block. Both programs were conducted on the 4.0 MW wet FGD pilot unit and PJFF unit. The HAP test block was temporarily concluded in June to further review the test data. This program began in March as part of the DOE Advanced Power Systems Program; the mission of this program is to accelerate the commercialization of affordable, high-efficiency, low-emission, coal-fueled electric generating technologies. The 1996 HAP test block focuses on three research areas, including: Catalytic oxidation of vapor-phase elemental mercury; Enhanced particulate-phase HAPs removal by electrostatic charging of liquid droplets; and Enhanced mercury removal by addition of additives to FGD process liquor. The TER test block is part of EPRI`s overall program to develop control technology options for reduction of trace element emissions. This experimental program investigates mercury removal and mercury speciation under different operating conditions.

  12. 77 FR 61748 - Annual Public Meeting of the Interagency Steering Committee on Multimedia Environmental Modeling

    Science.gov (United States)

    2012-10-11

    ... biogeochemical studies; (3) cyber-water research program; and (4) integration modeling for national weather... hold an open business session on the morning of the third day. A detailed agenda with presentation.... Please allow time to register with building security and bring two photo ID's. Direct access to the...

  13. Japan Nuclear Reaction Data Center (JCPRG), Faculty of Science, Hokkaido University, Steering Committee progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-11-15

    The Japan Nuclear Reaction Data Center (JCPRG) was approved as an organisation of Faculty of Science, Hokkaido University and established on April 1, 2007. In addition to nuclear data activities carried out by JCPRG (Japan-Charged Particle Nuclear Reaction Data Group), the centre is concerned with the evaluation of nuclear reaction data in nucleosynthesis in the universe. In order efficiently to compile reaction data obtained by using radioactive ion beam, the centre signed a research contract with RIKEN Nishina Center. We are scanning 16 journals for Japanese charged-particle and photo-nuclear nuclear reaction data compilation. From April 2006 to March 2007, CPND and PhND in 45 references (453 records, 1.83 MB) have been newly compiled for NRDF. Usually new data are released at the JCPRG web site several months prior to EXFOR. Since the 2006 NRDC meeting, we have made 104 new entries and have revised or deleted 142 old entries. Intensive numerical data compilations have been done. These data were shown in tabular form in dissertations which are (partially) published in Journals. About 30 new entries were compiled from these data. We have prepared CINDA batches for CPND published in Japan every half year. Each batch covers 6 issues of each of 4 Japanese journals JPJ, PTP, NST and JNRS. Bibliographies for neutron induced reaction data have been compiled by JAEA Nuclear Data Center as before. A new web-based NRDF search and plot system on MySQL was released in July, 2007. New compilation, which has been finalized for NRDF, but not for EXFOR, can be obtained from this site. DARPE (another NRDF search and plot system written in Perl) is also available at http://www.jcprg.org/darpe/. EXFOR/ENDF (http://www.jcprg.org/exfor/) search and plot system is available. We have also developed following utilities: PENDL (http://www.jcprg.org/endf/) and RENORM (http://www.jcprg.org/renorm). We are developing a new search system of CINDA. This is an extension of EXFOR/ENDF search system mentioned above. A preliminary version of the system is available at http://www.jcprg.org/cinda/. A Java-based digitizing system GSYS has been updated and released as GSYS Ver.2.2. We are interested in describing nuclear reaction data in XML (Extensible Markup Language), which might be a common (meta-) format of nuclear reaction data for various libraries (NRDF, EXFOR, ENDF etc.) and enable us to have common bases of software. We provide Japanese researchers in the fields of nuclear physics and nuclear engineering with nuclear reaction data. For more information, we published the Annual Report of Nuclear Reaction Data File Vol.20 in March 2007 (Japanese + English abstract, http://www.jcprg.org/annual/annual-e.html). We have also issued a list of newly added data into EXFOR every month (http://www.jcprg.org/exfor/info/recentdata.html) in a CINDA like format. We have received many comments on EXFOR compilation from Japanese users (mainly JENDL evaluators). These comments have been listed to a table (http://www.jcprg.org/exfor/info/feedbacks.html), and forwarded to other centres.

  14. SCIENTIFIC PRESENTATION. 7TH MEETING OF THE MANAGEMENT STEERING COMMITTEE OF THE RIKEN BNL COLLABORATION.

    Energy Technology Data Exchange (ETDEWEB)

    Lee, T.D.

    2001-02-13

    The RIKEN BNL Research Center (RBRC) was established in April 1997 at Brookhaven National Laboratory. It is funded by the ''Rikagaku Kenkysho,'' (RIKEN) The Institute of Physical and Chemical Research, of Japan. The Center is dedicated to the study of strong interactions, including hard QCD/spin physics, lattice QCD and RHIC (Relativistic Heavy Ion Collider) physics through nurturing of a new generation of young physicists. The Director of RBRC is Professor T. D. Lee. The first years were dedicated to the establishment of a theory group. This has essentially been completed consisting of Fellows, Postdocs, and RHIC Physics/University Fellows, with an active group of consultants. The center also organizes an extensive series of workshops on specific topics in strong interactions with an accompanying series of published proceedings. In addition, a 0.6 teraflop parallel processor computer has been constructed and operational since August 1998. It was awarded the Supercomputer 1998 Gordon Bell Prize for price performance. An active experimental group centered around the spin physics program at RHIC has subsequently also been established at RBRC. It presently consists of five Fellows, one Postdoc and several scientific collaborators with more appointments being expected in the near future. Members and participants of RBRC on occasion will develop articles such as this one, in the nature of a status report or a general review.

  15. SCIENTIFIC PRESENTATION. 7TH MEETING OF THE MANAGEMENT STEERING COMMITTEE OF THE RIKEN BNL COLLABORATION.

    Energy Technology Data Exchange (ETDEWEB)

    LEE,T.D.

    2001-02-13

    The RIKEN BNL Research Center (RBRC) was established in April 1997 at Brookhaven National Laboratory. It is funded by the ''Rikagaku Kenkysho,'' (RIKEN) The Institute of Physical and Chemical Research, of Japan. The Center is dedicated to the study of strong 'interactions, including hard QCD/spin physics, lattice QCD and RHIC (Relativistic Heavy Ion Collider) physics through nurturing of a new generation of young physicists. The Director of RBRC is Professor T. D. Lee. The first years were dedicated to the establishment of a theory group. This has essentially been completed consisting of Fellows, Postdocs, and RHIC Physics/University Fellows, with an active group of consultants. The center also organizes an extensive series of workshops on specific topics in strong interactions with an accompanying series of published proceedings. In addition, a 0.6 teraflop parallel processor computer has been constructed and operational since August 1998. It was awarded the Supercomputer 1998 Gordon Bell Prize for price performance. An active experimental group centered around the spin physics program at RHIC has subsequently also been established at RBRC. It presently consists of five Fellows, one Postdoc and several scientific collaborators with more appointments being expected in the near future. Members and participants of RBRC on occasion will develop articles such as this one, in the nature of a status report or a general review.

  16. Rocket Propulsion (RP) 21 Steering Committee Meeting - NASA Spacecraft Propulsion Update

    Science.gov (United States)

    Klem, Mark

    2016-01-01

    Lander Tech is three separate but synergistic efforts: Lunar CATALYST (Lunar Cargo Transportation and Landing by Soft Touchdown) Support U.S. industry led robotic lunar lander development via three public-private efforts. Support U.S. industry led robotic lunar lander development via three public-private partnerships. Infuse or transfer landing technologies into these public private partnerships. Advanced Exploration Systems-Automated Propellant Loading (APL) -Integrated Ground Operations. Demonstrate LH2 zero loss storage, loading and transfer operations via testing on a large scale in a relevant launch vehicle servicing environment. (KSC, GRC). Game Changing Technology-20 Kelvin -20 Watt Cryocooler Development of a Reverse Turbo-Brayton Cryocooler operating at 20 Kelvin with 20 Watts of refrigeration lift.

  17. Minutes of Technical Division Steering Committee Meeting July 14, 1953, Savannah River Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Evans, L.C.

    1953-07-24

    Agreements reached on security include classification and security regulations. Safety agreements include a problem with excessive heat in the metallurgy section. Other topics discussed include Building 777, CMX, hydrisides, and separations. Appendices include information on financial status and the status of technical division studies.

  18. Minutes of Technical Division Steering Committee meeting January 11, 1955, Savannah River Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Evans, L.C.

    1955-01-18

    The following studies were approved: 8501 - non-destructive testing, 8502 - 300 Area process development, 8503 - new fuel element fabrication, 8504 - protective coatings for new fuel elements, 8505 - corrosion, 8508 - instrument development in 300 Area, 8514 - instrument development in 100 Area, 8515 - instrument development in 200 Area, and 8524 - new LM elements. Information and Safety agreements are listed, and information in appended on the following topics: financial status, instrument development program, metallurgical development program, and Technical Division study status.

  19. Electric Power Research Institute Environmental Control Technology Center Report to the Steering Committee

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1998-01-12

    Operations and maintenance continued this month at the Electric Power Research Institute's (EPRI's) Environmental Control Technology Center (ECTC). Testing for the month involved the Dry Sorbent Injection (DSI) test block with the Carbon Injection System. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit, the 0.4 MW Mini-Pilot Wet Scrubber, and the 4.0 MW Pilot Wet Scrubber remained idle this month in a cold-standby mode and were inspected regularly. These units remain available for testing as future project work is identified.

  20. Scientific presentation. 7th meeting of the management steering committee of the RIKEN BNL Collaboration

    International Nuclear Information System (INIS)

    Lee, T.D.

    2001-01-01

    The RIKEN BNL Research Center (RBRC) was established in April 1997 at Brookhaven National Laboratory. It is funded by the ''Rikagaku Kenkysho,'' (RIKEN) The Institute of Physical and Chemical Research, of Japan. The Center is dedicated to the study of strong interactions, including hard QCD/spin physics, lattice QCD and RHIC (Relativistic Heavy Ion Collider) physics through nurturing of a new generation of young physicists. The Director of RBRC is Professor T. D. Lee. The first years were dedicated to the establishment of a theory group. This has essentially been completed consisting of Fellows, Postdocs, and RHIC Physics/University Fellows, with an active group of consultants. The center also organizes an extensive series of workshops on specific topics in strong interactions with an accompanying series of published proceedings. In addition, a 0.6 teraflop parallel processor computer has been constructed and operational since August 1998. It was awarded the Supercomputer 1998 Gordon Bell Prize for price performance. An active experimental group centered around the spin physics program at RHIC has subsequently also been established at RBRC. It presently consists of five Fellows, one Postdoc and several scientific collaborators with more appointments being expected in the near future. Members and participants of RBRC on occasion will develop articles such as this one, in the nature of a status report or a general review

  1. 78 FR 54248 - Notice of Public Meeting of the Interagency Steering Committee on Radiation Standards

    Science.gov (United States)

    2013-09-03

    ... reference in the development of proposals under the Administrative Procedure Act (APA) for changes to... APA process for notice and comment. Presentations of previous ISCORS public meetings are available at...

  2. 78 FR 21120 - Notice of Public Meeting of the Interagency Steering Committee on Radiation Standards

    Science.gov (United States)

    2013-04-09

    ... Occupational Safety and Health Administration; and the Department of Health and Human Services. Observer... Pennsylvania. ISCORS objectives are: (1) To facilitate a consensus on allowable levels of radiation risk to the... meetings include presentations by the chairs of the subcommittees and discussions of current radiation...

  3. 75 FR 66092 - Notice of Public Meeting of the Interagency Steering Committee on Radiation Standards

    Science.gov (United States)

    2010-10-27

    ...; Department of Labor's Occupational Safety and Health Administration; and the Department of Health and Human... States of Illinois and Pennsylvania. ISCORS maintains several objectives: (1) Facilitate a consensus on... their resolution. ISCORS meetings include presentations by the chairs of the subcommittees and...

  4. 76 FR 70130 - Notice of Public Meeting of the Interagency Steering Committee on Radiation Standards

    Science.gov (United States)

    2011-11-10

    ...; Department of Labor's Occupational Safety and Health Administration; and the Department of Health and Human... States of Illinois and Pennsylvania. ISCORS maintains several objectives: Facilitate a consensus on... resolution. ISCORS meetings include presentations by the chairs of the subcommittees and discussions of...

  5. 75 FR 48989 - Federal Interagency Steering Committee on Multimedia Environmental Modeling

    Science.gov (United States)

    2010-08-12

    ..., ISCMEM Chair, U.S. Geological Survey, National Research Program, Branch of Regional Research, Eastern..., optimization modeling, reactive transport modeling, and watershed and distributed water quality modeling...

  6. Annual report for the steering committee of the association Euratom-Belgian State for fusion 1994

    International Nuclear Information System (INIS)

    Moons, F.

    1994-09-01

    The work performed in 1994 at SCK/CEN in the field of technology for thermonuclear fusion is reported. It mainly embraces: (1) neutron irradiation effects on beryllium, (2) corrosion experiments on copper and molybdenum, (3) radiation hardening of opto-electronic components, (4) environmental tolerance and testing optical fibres assessment, (5) electrolytic recovery of elemental tritium from highly tritiated water, (6) in pile AISI 316L low cycle fatigue

  7. Mitigation of intergranular stress corrosion cracking in RBMK reactors. Final report of the programme's steering committee

    International Nuclear Information System (INIS)

    2002-09-01

    In 2000 the IAEA initiated an Extrabudgetary Programme on Mitigation of Intergranular Stress Corrosion Cracking in RBMK Reactors to assist countries operating RBMK reactors in addressing the issue in austenitic stainless steel 300 mm diameter piping. Intergranular stress corrosion cracking of austenitic stainless steel piping in BWRs has been a major safety concern since the early seventies. Similar degradation was found in RBMK reactor piping in 1997. Early in 1998 the IAEA responded to requests for assistance from RBMK operating countries on this issue through activities organized in the framework of Technical Co-operation Department regional projects and the Extrabudgetary Programme on the Safety of WWER and RBMK Nuclear Power Plants. Results of these activities were a basis for the formulation of the objective and scope of the Extrabudgetary Programme on Mitigation of Intergranular Stress Corrosion Cracking in RBMK reactors ('the Programme'). The scope of the Programme included in-service inspection, assessment, repair and mitigation, and water chemistry and decontamination. The Programme was pursued by means of exchange of experience, formulation of guidance, transfer of technology, and training, which will assist the RBMK operators to address related safety concerns. The Programme implementation relied on voluntary extrabudgetary financial contributions from Japan, Spain, the United Kingdom and the USA, and on in kind contributions from Finland, Germany and Sweden. The Programme was implemented in close co-ordination with ongoing national and bilateral activities and major inputs to the Programme were provided through the activities of the Swedish International Project Nuclear Safety and of the US DOE International Nuclear Safety Program. The RBMK nuclear power plants in Lithuania, Russian Federation and Ukraine hosted most of the Programme activities. Support of these Member States involved in the Programme was instrumental for its successful completion in 2002. This report summarizes the main results, conclusions and recommendations of the Programme. More detailed information is included in 35 technical reports prepared in the framework of this Programme which are available on http://www.iaea.org/ns/nusafe/ebpigscc.htm along with other information on the Programme

  8. Altered steering strategies for goal-directed locomotion in stroke

    Science.gov (United States)

    2013-01-01

    Background Individuals who have sustained a stroke can manifest altered locomotor steering behaviors when exposed to optic flows expanding from different locations. Whether these alterations persist in the presence of a visible goal and whether they can be explained by the presence of a perceptuo-motor disorder remain unknown. The purpose of this study was to compare stroke participants and healthy participants on their ability to control heading while exposed to changing optic flows and target locations. Methods Ten participants with stroke (55.6 ± 9.3 yrs) and ten healthy controls (57.0 ± 11.5 yrs) participated in a mouse-driven steering task (perceptuo-motor task) while seated and in a walking steering task. In the seated steering task, participants were instructed to head or ‘walk’ toward a target in the virtual environment by using a mouse while wearing a helmet-mounted display (HMD). In the walking task, participants performed a similar steering task in the same virtual environment while walking overground at their comfortable speed. For both experiments, the target and/or the focus of expansion (FOE) of the optic flow shifted to the side (±20°) or remained centered. The main outcome measure was net heading errors (NHE). Secondary outcomes included mediolateral displacement, horizontal head orientation, and onsets of heading and head reorientation. Results In the walking steering task, the presence of FOE shifts modulated the extent and timing of mediolateral displacement and head rotation changes, as well as NHE magnitudes. Participants overshot and undershot their net heading, respectively, in response to ipsilateral and contralateral FOE and target shifts. Stroke participants made larger NHEs, especially when the FOE was shifted towards the non-paretic side. In the seated steering task, similar NHEs were observed between stroke and healthy participants. Conclusions The findings highlight the fine coordination between rotational and

  9. Task Action Plans for generic activities: Category A

    International Nuclear Information System (INIS)

    1978-10-01

    The document contains listings of generic technical activities as identified and placed in priority categories by the Office of Nuclear Reactor Regulation (NRR). In addition, it contains definitions of Priority Categories A, B, C, and D and copies of forty approved Task Action Plans for Category A activites. Problem Descriptions for the Category B, C and D tasks are contained in NUREG--0471. This material was developed within the context of NRR's Program for the Resolution of Generic Issues Related to Nuclear Power Plants. As part of this program, the assignment of identified issues to priority categories and the approval of Task Action Plans were made by NRR's Technical Activities Steering Committee, chaired by the Deputy Director, NRR. The original document was published in November 1977. In December 1977 it was updated to add the Task Action Plan for Task No. A-17, Systems Interactions in Nuclear Power Plants. This update adds Task Action Plans for Tasks A-13, A-18, A-21, A-22, A-32, A-37, A-38 and A-40. Task A-41 has been included in Task A-40. In addition, as part of this update, the following changes were made to each Task Action Plan (with the exception of the Task Action Plan for Task A-9): (1) a title page was added that includes information such as Lead NRR Organization, Lead Supervisor, Task Manager, Applicability, and Projected Completion Date; (2) detailed schedule information was deleted; and (3) a new Section 3 entitled Basis for Continued Plant Operation and Licensing Pending Completion of Task was added. These changes represent general reformatting and the addition or deletion of certain general types of information. Some substantive revisions were made to several of the plans, however, a general revision of all of the plans was not undertaken at this time

  10. Observation of one-way Einstein-Podolsky-Rosen steering

    Science.gov (United States)

    Händchen, Vitus; Eberle, Tobias; Steinlechner, Sebastian; Samblowski, Aiko; Franz, Torsten; Werner, Reinhard F.; Schnabel, Roman

    2012-09-01

    The distinctive non-classical features of quantum physics were first discussed in the seminal paper by A. Einstein, B. Podolsky and N. Rosen (EPR) in 1935. In his immediate response, E. Schrödinger introduced the notion of entanglement, now seen as the essential resource in quantum information as well as in quantum metrology. Furthermore, he showed that at the core of the EPR argument is a phenomenon that he called steering. In contrast to entanglement and violations of Bell's inequalities, steering implies a direction between the parties involved. Recent theoretical works have precisely defined this property, but the question arose as to whether there are bipartite states showing steering only in one direction. Here, we present an experimental realization of two entangled Gaussian modes of light that in fact shows the steering effect in one direction but not in the other. The generated one-way steering gives a new insight into quantum physics and may open a new field of applications in quantum information.

  11. Sources of carbohydrates in the ingestive behavior of feedlot steers

    Directory of Open Access Journals (Sweden)

    Viviane Santos da Silva

    2014-05-01

    Full Text Available In this article we research the influence of different sources of carbohydrates (corn, soybean hulls or wheat bran upon the digestive behavior of 24 confined castrated steers with an initial average age and weight of 20 months and 330 kg born from the cross between Charolais and Nellore. The diet was composed of 40% sorghum silage and 60% concentrate. The time spent on total ruminating (an average of 454.6 min/day was not influenced by the source of carbohydrate. The animals from the wheat bran treatment spent less time idle (718 min in relation to those on the corn and soybean hulls treatments, which did not differ between themselves (an average of 792 min/day. The steers from the wheat bran treatment remained less time feeding (184 min/day compared with those fed the other treatments, whose average time of permanence in this activity was 214 minutes per day. The other studied variables did not present a significant difference between the treatments. Inclusion of wheat bran in the diet of the confined steers results in less spent time idle, while steers feeding on soybean hulls spend less time feeding. The use of corn, soybean hulls, or wheat bran in the diet of the confined steers does not affect the total cudding time.

  12. 77 FR 38768 - Smart Grid Advisory Committee

    Science.gov (United States)

    2012-06-29

    ...The Smart Grid Advisory Committee (SGAC or Committee) will hold a meeting via teleconference on Friday, July 27, 2012 from 11 a.m. to 2 p.m. Eastern Time (ET). The primary purposes of this meeting are to review updates on the Smart Grid Interoperability Panel transition plan, review the status of the research subcommittee and the August Smart Grid Workshop in Boulder, Colorado, and plan for a fall meeting. Interested members of the public will be able to participate in the meeting from remote locations by calling into a central phone number.

  13. Steer wrestling : Hemisphere GPS hopes to bring its auto-steering technology to the oilsands

    Energy Technology Data Exchange (ETDEWEB)

    Bentein, J.

    2009-01-15

    Hemisphere GPS has developed a technology to guide giant dump trucks used in oilsand mining operations. The technology offers the possibility to haul oilsands from northern Alberta mines using driverless, remotely-guided trucks. The GPS system would ensure more accuracy than a human operator. The technology has the potential to be commercialized within the next year, and may be adapted for the mining industry. The unmanned technology would help oilsands mine operators lower their labour costs. Hemisphere GPS gained access to the steer-by-wire technology when it purchased the Australian software company Beeline Technologies Pty Ltd. Hemisphere GPS has also developed prototype unmanned drilling rig technology which has considerable potential in the energy industry. The company has won numerous awards in recognition of its commercial achievements in science and technology. 1 fig.

  14. Points from the September Committee Meetings

    CERN Multimedia

    2002-01-01

    After a turbulent year, the Committee meetings during the week beginning 16th September took a calmer nature, even if the follow-up of the cost-to-completion review was still a central topic of discussion. The detailed Action Plan and timetable for implementing the recommendations of the External Review Committee were among the principle items. The Plan is based on actions that address specific recommendations, from the redeployment of staff to the LHC to improved financial controls and budgetary tools. It was well received by the Committees and will be presented to the full CERN Council in December. In the meantime, many actions are underway, such as the restructuring of the Accelerator Sector, and the establishment of an external committee to review costs and progress of the LHC on an annual basis. The Finance Committee examined the proposed budget for 2003, which will also be presented to Council for approval in December. In addition, the Committee approved the volume of Industrial Support contracts for 20...

  15. Experimental EPR-steering using Bell-local states

    Science.gov (United States)

    Saunders, D. J.; Jones, S. J.; Wiseman, H. M.; Pryde, G. J.

    2010-11-01

    The concept of `steering' was introduced in 1935 by Schrödinger as a generalization of the EPR (Einstein-Podolsky-Rosen) paradox. It has recently been formalized as a quantum-information task with arbitrary bipartite states and measurements, for which the existence of entanglement is necessary but not sufficient. Previous experiments in this area have been restricted to an approach that followed the original EPR argument in considering only two different measurement settings per side. Here we demonstrate experimentally that EPR-steering occurs for mixed entangled states that are Bell local (that is, that cannot possibly demonstrate Bell non-locality). Unlike the case of Bell inequalities, increasing the number of measurement settings beyond two-we use up to six-significantly increases the robustness of the EPR-steering phenomenon to noise.

  16. Field test of wake steering at an offshore wind farm

    Directory of Open Access Journals (Sweden)

    P. Fleming

    2017-05-01

    Full Text Available In this paper, a field test of wake-steering control is presented. The field test is the result of a collaboration between the National Renewable Energy Laboratory (NREL and Envision Energy, a smart energy management company and turbine manufacturer. In the campaign, an array of turbines within an operating commercial offshore wind farm in China have the normal yaw controller modified to implement wake steering according to a yaw control strategy. The strategy was designed using NREL wind farm models, including a computational fluid dynamics model, Simulator fOr Wind Farm Applications (SOWFA, for understanding wake dynamics and an engineering model, FLOw Redirection and Induction in Steady State (FLORIS, for yaw control optimization. Results indicate that, within the certainty afforded by the data, the wake-steering controller was successful in increasing power capture, by amounts similar to those predicted from the models.

  17. Dissipation induced asymmetric steering of distant atomic ensembles

    Science.gov (United States)

    Cheng, Guangling; Tan, Huatang; Chen, Aixi

    2018-04-01

    The asymmetric steering effects of separated atomic ensembles denoted by the effective bosonic modes have been explored by the means of quantum reservoir engineering in the setting of the cascaded cavities, in each of which an atomic ensemble is involved. It is shown that the steady-state asymmetric steering of the mesoscopic objects is unconditionally achieved via the dissipation of the cavities, by which the nonlocal interaction occurs between two atomic ensembles, and the direction of steering could be easily controlled through variation of certain tunable system parameters. One advantage of the present scheme is that it could be rather robust against parameter fluctuations, and does not require the accurate control of evolution time and the original state of the system. Furthermore, the double-channel Raman transitions between the long-lived atomic ground states are used and the atomic ensembles act as the quantum network nodes, which makes our scheme insensitive to the collective spontaneous emission of atoms.

  18. A Parallel and Distributed Surrogate Model Implementation for Computational Steering

    KAUST Repository

    Butnaru, Daniel

    2012-06-01

    Understanding the influence of multiple parameters in a complex simulation setting is a difficult task. In the ideal case, the scientist can freely steer such a simulation and is immediately presented with the results for a certain configuration of the input parameters. Such an exploration process is however not possible if the simulation is computationally too expensive. For these cases we present in this paper a scalable computational steering approach utilizing a fast surrogate model as substitute for the time-consuming simulation. The surrogate model we propose is based on the sparse grid technique, and we identify the main computational tasks associated with its evaluation and its extension. We further show how distributed data management combined with the specific use of accelerators allows us to approximate and deliver simulation results to a high-resolution visualization system in real-time. This significantly enhances the steering workflow and facilitates the interactive exploration of large datasets. © 2012 IEEE.

  19. Discussion on teaching reform of environmental planning and management

    Science.gov (United States)

    Zhang, Qiugen; Chen, Suhua; Xie, Yu; Wei, Li'an; Ding, Yuan

    2018-05-01

    The curriculum of environmental planning and management is an environmental engineering major curriculum established by the teaching steering committee of environmental science and engineering of Education Ministry, which is the core curriculum of Chinese engineering education professional certification. It plays an important role in cultivating environmental planning and environmental management ability of environmental engineering major. The selection and optimization of the course teaching content of environmental planning and management were discussed which including curriculum teaching content updating and optimizing and teaching resource system construction. The comprehensive application of teaching method was discussed which including teaching method synthesis and teaching method. The final combination of the assessment method was also discussed which including the formative assessment normal grades and the final result of the course examination. Through the curriculum comprehensive teaching reform, students' knowledge had been broadened, the subject status and autonomy of learning had been enhanced, students' learning interest had been motivated, the ability of students' finding, analyzing and solving problems had been improved. Students' innovative ability and positive spirit had been well cultivated.

  20. The Strategic Plan of the Nuclear Energy Agency, 1999

    International Nuclear Information System (INIS)

    1999-01-01

    The OECD has been engaged in the past few years in a process of reform to take account of the impact of globalization on its Members' economies, and to allow for proper refocusing of its work, notably on the subject of sustainable development. These developments are having an impact on the Nuclear Energy Agency (NEA). The group on the future role of the NEA delivered its report at the end of January 1998 and one key recommendation is the elaboration of a strategic plan for the Agency. The recommendations made in the report served to stimulate a review of NEA goals, priorities, methods of work and products. This review has taken account of the recommendations in the report. The review served as the basis for this Strategic Plan for the NEA, which has been developed to provide guidance to the Agency in planning its activities and implementing its programmes over a five-year period. The report contains detailed description of the following topics:Mission of NEA: Strategic arenas of work, including sectorial arenas, Data bank, Information and communication; Interactions; Relations with non-member countries; Role of the Steering Committee for Nuclear Energy; Working methods; Resources. (R.P.)

  1. Autonomous Shepherding Behaviors of Multiple Target Steering Robots.

    Science.gov (United States)

    Lee, Wonki; Kim, DaeEun

    2017-11-25

    This paper presents a distributed coordination methodology for multi-robot systems, based on nearest-neighbor interactions. Among many interesting tasks that may be performed using swarm robots, we propose a biologically-inspired control law for a shepherding task, whereby a group of external agents drives another group of agents to a desired location. First, we generated sheep-like robots that act like a flock. We assume that each agent is capable of measuring the relative location and velocity to each of its neighbors within a limited sensing area. Then, we designed a control strategy for shepherd-like robots that have information regarding where to go and a steering ability to control the flock, according to the robots' position relative to the flock. We define several independent behavior rules; each agent calculates to what extent it will move by summarizing each rule. The flocking sheep agents detect the steering agents and try to avoid them; this tendency leads to movement of the flock. Each steering agent only needs to focus on guiding the nearest flocking agent to the desired location. Without centralized coordination, multiple steering agents produce an arc formation to control the flock effectively. In addition, we propose a new rule for collecting behavior, whereby a scattered flock or multiple flocks are consolidated. From simulation results with multiple robots, we show that each robot performs actions for the shepherding behavior, and only a few steering agents are needed to control the whole flock. The results are displayed in maps that trace the paths of the flock and steering robots. Performance is evaluated via time cost and path accuracy to demonstrate the effectiveness of this approach.

  2. Autonomous Shepherding Behaviors of Multiple Target Steering Robots

    Directory of Open Access Journals (Sweden)

    Wonki Lee

    2017-11-01

    Full Text Available This paper presents a distributed coordination methodology for multi-robot systems, based on nearest-neighbor interactions. Among many interesting tasks that may be performed using swarm robots, we propose a biologically-inspired control law for a shepherding task, whereby a group of external agents drives another group of agents to a desired location. First, we generated sheep-like robots that act like a flock. We assume that each agent is capable of measuring the relative location and velocity to each of its neighbors within a limited sensing area. Then, we designed a control strategy for shepherd-like robots that have information regarding where to go and a steering ability to control the flock, according to the robots’ position relative to the flock. We define several independent behavior rules; each agent calculates to what extent it will move by summarizing each rule. The flocking sheep agents detect the steering agents and try to avoid them; this tendency leads to movement of the flock. Each steering agent only needs to focus on guiding the nearest flocking agent to the desired location. Without centralized coordination, multiple steering agents produce an arc formation to control the flock effectively. In addition, we propose a new rule for collecting behavior, whereby a scattered flock or multiple flocks are consolidated. From simulation results with multiple robots, we show that each robot performs actions for the shepherding behavior, and only a few steering agents are needed to control the whole flock. The results are displayed in maps that trace the paths of the flock and steering robots. Performance is evaluated via time cost and path accuracy to demonstrate the effectiveness of this approach.

  3. An automatic beam steering system for the NSLS X-17T beam line using closed orbit feedback

    International Nuclear Information System (INIS)

    Nawrocky, R.J.; Ma, Li; Rarback, H.M.; Singh, O.V.; Yu, L.H.

    1987-01-01

    Initial observations of motion of the undulator radiation in the NSLS X-17T beam line clearly indicated that the beam had to be stabilized in both directions to be usable for the planned soft x-ray imaging experiments. The low frequency spectra of beam motion contained peaks in the range from dc to 60 Hz and at higher frequencies. A beam steering system employing closed orbit feedback has been designed and installed to stabilize the beam in both planes. In each plane of motion, beam position is measured with a beam position detector and a correction signal is fed back to a local four magnet orbit bump to dynamically control the angle of the radiation at the source. This paper describes the design and performance of the beam steering system

  4. Stochastic stability of four-wheel-steering system

    International Nuclear Information System (INIS)

    Huang Dongwei; Wang Hongli; Zhu Zhiwen; Feng Zhang

    2007-01-01

    A four-wheel-steering system subjected to white noise excitations was reduced to a two-degree-of-freedom quasi-non-integrable-Hamiltonian system. Subsequently we obtained an one-dimensional Ito stochastic differential equation for the averaged Hamiltonian of the system by using the stochastic averaging method for quasi-non-integrable-Hamiltonian systems. Thus, the stochastic stability of four-wheel-steering system was analyzed by analyzing the sample behaviors of the averaged Hamiltonian at the boundary H = 0 and calculating its Lyapunov exponent. An example given at the end demonstrated that the conclusion obtained is of considerable significance

  5. Steering of Educational Processes in a Digital Medium Environment

    DEFF Research Database (Denmark)

    Tække, Jesper; Paulsen, Michael

    2015-01-01

    by systems theory we outline a more adequate way of teaching in the new medium environment – a teaching that can manage the new situation and use the new possibilities provided by the digital media. The argumentation builds on empirical findings from the action research project Socio Media Education (SME......This paper is about challenges to steering and leadership of educational interaction in classrooms provided by the new medium environment that comes with digital media. In the new medium environment, the old way of steering what is going on in the classroom appears not to work since...

  6. NACS Store Planning Manual.

    Science.gov (United States)

    College Store Journal, 1979

    1979-01-01

    Topics discussed by the NACS Store Planning/Renovation Committees in this updated version of the college store renovation manual include: short- and long-range planning, financial considerations, professional planning assistance, the store's image and business character, location considerations, building requirements, space requirements, fixtures,…

  7. New York City Energy-Water Integrated Planning: A Pilot Study

    Energy Technology Data Exchange (ETDEWEB)

    Bhatt,V.; Crosson, K. M.; Horak, W.; Reisman, A.

    2008-12-16

    The New York City Energy-Water Integrated Planning Pilot Study is one of several projects funded by Sandia National Laboratories under the U.S. Department of Energy Energy-Water Nexus Program. These projects are intended to clarify some key issues and research needs identified during the Energy-Water Nexus Roadmapping activities. The objectives of the New York City Pilot Project are twofold: to identify energy-water nexus issues in an established urban area in conjunction with a group of key stakeholders and to define and apply an integrated energy and water decision support tool, as proof-of-concept, to one or more of these issues. During the course of this study, the Brookhaven National Laboratory project team worked very closely with members of a Pilot Project Steering Committee. The Steering Committee members brought a breadth of experience across the energy, water and climate disciplines, and all are well versed in the particular issues faced by an urban environment, and by New York City in particular. The first task was to identify energy-water issues of importance to New York City. This exercise was followed by discussion of the qualities and capabilities that an ideal decision support tool should display to address these issues. The decision was made to start with an existing energy model, the New York City version of the MARKAL model, developed originally at BNL and now used globally by many groups for energy analysis. MARKAL has the virtue of being well-vetted, transparent, and capable of calculating 'material' flows, such as water use by the energy system and energy requirements of water technology. The Steering Committee members defined five scenarios of interest, representing a broad spectrum of New York City energy-water issues. Brookhaven National Laboratory researchers developed a model framework (Water-MARKAL) at the desired level of detail to address the scenarios, and then attempted to gather the New York City-specific information

  8. 44 CFR 12.6 - Establishment of advisory committees.

    Science.gov (United States)

    2010-10-01

    ... the advisory committee to be fairly balanced in terms of the points of view represented in the... employed by it), will be provided adequate quarters, and will have funds available to meet its other... should describe the Agency's plan to attain balanced membership on the proposed committee, as prescribed...

  9. 76 FR 64992 - Debt Management Advisory Committee; Meeting

    Science.gov (United States)

    2011-10-19

    ... from representatives of the financial community prior to making its final decisions on major financing... announcement of financing plans may not reflect the recommendations provided in reports of the Committee... the Committee meeting, following the release of a statement of economic conditions and financing...

  10. 76 FR 81911 - National Advisory Committee for Implementation of the National Forest System Land Management...

    Science.gov (United States)

    2011-12-29

    ...; and 7. Offer recommendations for integrating the land management planning process with landscape scale... National Forest System Land Management Planning Rule AGENCY: USDA Forest Service. ACTION: Notice of intent... Management Planning Rule (Committee). In accordance with provisions of the Federal Advisory Committee Act...

  11. Measuring inconsistency in research ethics committee review.

    Science.gov (United States)

    Trace, Samantha; Kolstoe, Simon Erik

    2017-11-28

    The review of human participant research by Research Ethics Committees (RECs) or Institutional Review Boards (IRBs) is a complex multi-faceted process that cannot be reduced to an algorithm. However, this does not give RECs/ IRBs permission to be inconsistent in their specific requirements to researchers or in their final opinions. In England the Health Research Authority (HRA) coordinates 67 committees, and has adopted a consistency improvement plan including a process called "Shared Ethical Debate" (ShED) where multiple committees review the same project. Committee reviews are compared for consistency by analysing the resulting minutes. We present a description of the ShED process. We report an analysis of minutes created by research ethics committees participating in two ShED exercises, and compare them to minutes produced in a published "mystery shopper" exercise. We propose a consistency score by defining top themes for each exercise, and calculating the ratio between top themes and total themes identified by each committee for each ShED exercise. Our analysis highlights qualitative differences between the ShED 19, ShED 20 and "mystery shopper" exercises. The quantitative measure of consistency showed only one committee across the three exercises with more than half its total themes as top themes (ratio of 0.6). The average consistency scores for the three exercises were 0.23 (ShED19), 0.35 (ShED20) and 0.32 (mystery shopper). There is a statistically significant difference between the ShED 19 exercise, and the ShED 20 and mystery shopper exercises. ShED exercises are effective in identifying inconsistency between ethics committees and we describe a scoring method that could be used to quantify this. However, whilst a level of inconsistency is probably inevitable in research ethics committee reviews, studies must move beyond the ShED methodology to understand why inconsistency occurs, and what an acceptable level of inconsistency might be.

  12. Effects of slow-release urea on ruminal digesta characteristics and growth performance in beef steers

    DEFF Research Database (Denmark)

    Taylor-Edwards, C C; Hibbard, G; Kitts, S E

    2009-01-01

    Two experiments were conducted to evaluate the effects of slow urea (SRU) versus feed-grade urea on ruminal metabolite characteristics in steers and DMI, gain, and G:F in growing beef steers.......Two experiments were conducted to evaluate the effects of slow urea (SRU) versus feed-grade urea on ruminal metabolite characteristics in steers and DMI, gain, and G:F in growing beef steers....

  13. 78 FR 69991 - Advisory Committee; Veterinary Medicine Advisory Committee; Termination

    Science.gov (United States)

    2013-11-22

    .... FDA-2013-N-1380] Advisory Committee; Veterinary Medicine Advisory Committee; Termination AGENCY: Food... announcing the termination of the Veterinary Medicine Advisory Committee. This document removes the Veterinary Advisory Committee from the Agency's list of standing advisory committees. DATES: This rule is...

  14. Introduction to Nuclear Power Plant Environment Supervisory Committee

    International Nuclear Information System (INIS)

    Lee, Byung Il

    2008-01-01

    In Korea, there are five nuclear power plant sites, located at Yongkwang, Kori, Shin Kori, Uljin, and Wolsong. Each administrative district has its own NESC (Nuclear plant Environment Public Supervisory Committee) which consists of a steering committee and a center. The purpose of NESC is to let the public survey and inspect nuclear plant environment and then improve a clarity and confidence in plant construction and operation by themselves. In order to understand the situation of NESC and explore ways toward a better role of NESC, in this paper we try to enumerate a few major facts related to a current status of NESC. As a summary, there must be a great role of NESC in the relationship between the residents, a nuclear industry company and the related government division. Furthermore, NESC would certainly do its role for all sides provided that more strong definition of NESC in law, more financial supporting and more philosophical speculation for the being of NESC

  15. The Australasian Resuscitation in Sepsis Evaluation (ARISE) trial statistical analysis plan.

    Science.gov (United States)

    Delaney, Anthony P; Peake, Sandra L; Bellomo, Rinaldo; Cameron, Peter; Holdgate, Anna; Howe, Belinda; Higgins, Alisa; Presneill, Jeffrey; Webb, Steve

    2013-09-01

    The Australasian Resuscitation in Sepsis Evaluation (ARISE) study is an international, multicentre, randomised, controlled trial designed to evaluate the effectiveness of early goal-directed therapy compared with standard care for patients presenting to the emergency department with severe sepsis. In keeping with current practice, and considering aspects of trial design and reporting specific to non-pharmacological interventions, our plan outlines the principles and methods for analysing and reporting the trial results. The document is prepared before completion of recruitment into the ARISE study, without knowledge of the results of the interim analysis conducted by the data safety and monitoring committee and before completion of the two related international studies. Our statistical analysis plan was designed by the ARISE chief investigators, and reviewed and approved by the ARISE steering committee. We reviewed the data collected by the research team as specified in the study protocol and detailed in the study case report form. We describe information related to baseline characteristics, characteristics of delivery of the trial interventions, details of resuscitation, other related therapies and other relevant data with appropriate comparisons between groups. We define the primary, secondary and tertiary outcomes for the study, with description of the planned statistical analyses. We have developed a statistical analysis plan with a trial profile, mock-up tables and figures. We describe a plan for presenting baseline characteristics, microbiological and antibiotic therapy, details of the interventions, processes of care and concomitant therapies and adverse events. We describe the primary, secondary and tertiary outcomes with identification of subgroups to be analysed. We have developed a statistical analysis plan for the ARISE study, available in the public domain, before the completion of recruitment into the study. This will minimise analytical bias and

  16. supplementation of energy and/or protein to steers grazing summer ...

    African Journals Online (AJOL)

    Some aspects of the effect of supplementary energy and/or protein, strategically ptovided to steers on summer veld, were investi gated. 40 Friesland steers in the age ... was posed whether the strategic provision of energy and or protein to steers grazing .... Definitions and abbreviotions was determined after cooling for 24 h ...

  17. Design, Modeling And Control Of Steering And Braking For An Urban Electric Vehicle

    OpenAIRE

    Maciua, Dragos

    1996-01-01

    This report describes research which involved the design modification, modeling and control of automatic steering and braking systems for an urban electric vehicle. The vehicle is equipped with four-wheel independent drive, four-wheel independent braking and four-wheel steering. Control algorithms were developed for steering and braking. Simulation results show the feasibility of the algorithms.

  18. Chromium supplementation enhances the acute phase response of steers to a lipopolysaccharide (LPS) challenge

    Science.gov (United States)

    The study examined the effect of chromium supplementation on the response of steers to an LPS challenge. Twenty crossbred steers (235±4 kg BW) received 0 ppb (Control; C) or 200 ppb chromium propionate (CHR) for 55 days. Steers were fitted with jugular catheters and rectal temperature (RT) recording...

  19. Enhancement of the acute phase response to lipopolysaccharide (LPS) challenge in steers supplemented with chromium

    Science.gov (United States)

    The study examined the effect of chromium supplementation on the response of steers to an LPS challenge. Twenty steers received a premix that added 0 (control) or 0.2 mg/kg of chromium (KemTRACE®brandChromiumProprionate 0.04%, Kemin Industries) to the total diet on a dry matter basis for 55 d. Steer...

  20. 46 CFR 78.47-55 - Instructions for changing steering gear.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Instructions for changing steering gear. 78.47-55... OPERATIONS Markings for Fire and Emergency Equipment, Etc. § 78.47-55 Instructions for changing steering gear..., relating in order, the different steps to be taken in changing to the emergency steering gear. Each clutch...

  1. 46 CFR 97.37-33 - Instructions for changing steering gear.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Instructions for changing steering gear. 97.37-33... steering gear. (a) Instructions in at least 1/2 inch letters and figures shall be posted in the steering... gear. Each clutch, gear, wheel, lever, valve, or switch which is used during the changeover shall be...

  2. Steering a Steady Course in the South China Sea

    Science.gov (United States)

    2017-10-27

    NUMBER (Include area code ) 401-841-3556 Standard Form 298 (Rev. 8-98) Prescribed by ANSI-Std Z39-18 Steering a Steady Course in the South...minor features claimed by a Filipino civilian in the SCS are not worth US blood, talent , or treasure defending against the PRC. The PRC, on the other

  3. CLOSTAT alters the serum metabolome of Holstein Steer Calves

    Science.gov (United States)

    Probiotics are gaining increased interest in calf feeding operations as some producers seek novel, non-antibiotic technologies to improve health and performance. Therefore, the objective of this study was to evaluate changes in serum metabolomic compounds of Holstein steer calves supplemented with C...

  4. Trailer steering control of a tractor-trailer Robot

    NARCIS (Netherlands)

    Ritzen, P.J.; Roebroek, E.J.W.; Van De Wouw, N.; Jiang, Z.P.; Nijmeijer, H.

    2016-01-01

    In this paper, we consider active trailer steering control as a means to improve the maneuverability of (long) truck-trailer combinations during cornering. Hereto, we formulate the problem of reducing the so-called swept path width during cornering and that of eliminating unsafe tail swing of the

  5. Sliding mode observer design for automatic steering of vehicle

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, J.R.; Rachid, A. [LSA, Amiens (France); Xu, S.J. [Harbin Inst. of Tech. (China)]|[IUT de Longwy, Cosnes et Romain (France); Darouach, M. [IUT de Longwy, Cosnes et Romain (France)

    2000-07-01

    This paper deals with the observer design problem for automatic steering of vehicles. The lateral motion of the vehicles is considered. A sliding mode observer is derived such that the observation errors converge to zero asymptotically in finite time. The simulation results have shown that the design is very effective. (orig.)

  6. Steering Micro-Robotic Swarm by Dynamic Actuating Fields

    NARCIS (Netherlands)

    Chao, Q.; Yu, J; Dai, C.; Xu, T; Zhang, L.; Wang, C.C.; Jin, X.

    2016-01-01

    We present a general solution for steering microrobotic
    swarm by dynamic actuating fields. In our approach, the
    motion of micro-robots is controlled by changing the actuating
    direction of a field applied to them. The time-series sequence
    of actuating field’s directions can be

  7. Complex Education Systems: From Steering Change to Governance

    Science.gov (United States)

    Michel, Alain

    2016-01-01

    The theories and approaches of steering/monitoring a process of change within education systems have evolved over the last 20 years or so as a result of many factors such as globalisation and decentralisation, a faster pace of change, increasing expectations and demands from various stakeholders (parents, employers, teacher unions, etc.) and the…

  8. Multifunctional Converter Drive for Automotive Electric Power Steering Systems

    NARCIS (Netherlands)

    Hackner, T.J.

    2013-01-01

    In this thesis it is shown that in the case of an automotive electric power steering system, critical pulse power loads can be decoupled from the power net with a storage element and a multifunctional converter. A multifunctional converter system is proposed because it uses the motor drive system as

  9. Improving yaw dynamics by feedforward rear wheel steering

    NARCIS (Netherlands)

    Besselink, I.J.M.; Veldhuizen, T.J.; Nijmeijer, H.

    2008-01-01

    Active rear wheel steering can be applied to improve vehicle yaw dynamics. In this paper two possible control algorithms are discussed. The first method is a yaw rate feedback controller with a reference model, which has been reported in a similar form previously in literature. The second controller

  10. Auditory orientation in crickets: Pattern recognition controls reactive steering

    Science.gov (United States)

    Poulet, James F. A.; Hedwig, Berthold

    2005-10-01

    Many groups of insects are specialists in exploiting sensory cues to locate food resources or conspecifics. To achieve orientation, bees and ants analyze the polarization pattern of the sky, male moths orient along the females' odor plume, and cicadas, grasshoppers, and crickets use acoustic signals to locate singing conspecifics. In comparison with olfactory and visual orientation, where learning is involved, auditory processing underlying orientation in insects appears to be more hardwired and genetically determined. In each of these examples, however, orientation requires a recognition process identifying the crucial sensory pattern to interact with a localization process directing the animal's locomotor activity. Here, we characterize this interaction. Using a sensitive trackball system, we show that, during cricket auditory behavior, the recognition process that is tuned toward the species-specific song pattern controls the amplitude of auditory evoked steering responses. Females perform small reactive steering movements toward any sound patterns. Hearing the male's calling song increases the gain of auditory steering within 2-5 s, and the animals even steer toward nonattractive sound patterns inserted into the speciesspecific pattern. This gain control mechanism in the auditory-to-motor pathway allows crickets to pursue species-specific sound patterns temporarily corrupted by environmental factors and may reflect the organization of recognition and localization networks in insects. localization | phonotaxis

  11. Carcass mass gains of steers grazing star grass, with different ...

    African Journals Online (AJOL)

    Carcass mass gains of steers grazing dryland Cynodon aethiopicus cv. No. 2 Star grass pastures during the growing season were determined for each of 16 treatments comprising four levels of nitrogen fertilisation in combination with four overlapping sets of stocking rates. The treatments were repeated over four growing ...

  12. A hybrid system for beam steering and wavefront control

    Science.gov (United States)

    Nikulin, Vladimir V.

    2004-06-01

    Performance of long-range mobile laser systems operating within Earth's atmosphere is generally limited by several factors. Movement of the communicating platforms, such as aircraft, terrain vehicles, etc., complemented by mechanical vibrations, is the main cause of pointing errors. In addition, atmospheric turbulence causes changes of the refractive index along the propagation path that lead to phase distortions (aberrations), thus creating random redistribution of optical energy in the spatial domain. The combined effect of these factors leads to an increased bit-error probability under adverse operation conditions. While traditional approaches provide separate treatment of these problems, suggesting the development of high-bandwidth beam steering systems to perform tracking and jitter rejection, and wavefront control for the mitigation of atmospheric effects, the two tasks could be integrated. In this paper we present a hybrid laser beam steering/wavefront control system comprising an electrically addressed spatial light modulator (SLM) installed on the Omni-Wrist sensor mount platform. The function of the Omni-Wrist is to provide coarse steering over a wide range of pointing angles, while the purpose of the SLM is twofold: it performs wavefront correction and fine steering. The control law for the Omni-Wrist is synthesized using the decentralized approach that provides independent access to the azimuth and declination channels, while the algorithm for calculating the required phase profile for the SLM is optimization-based. This paper presents the control algorithms, the approach to coordinating the operation of the both systems and the simulation results.

  13. Slow-release urea in supplement fed to beef steers

    Directory of Open Access Journals (Sweden)

    Ana Paula Gonçalves

    2015-02-01

    Full Text Available Replacing regular urea (RU by slow-release urea (SRU at two levels of non-protein nitrogen (NPN in concentrate, offered with low-quality roughage, was evaluated in beef steers on dry matter intake (DMI, ruminal fermentation parameters, plasma urea nitrogen (PUN, total tract apparent digestibility of diets and in situ degradability of nitrogen sources. Eight ruminally cannulated steers were allocated into two 4x4 Latin squares, totalizing four treatments: 40 NPN/0 SRU: 40% of concentrate crude protein (CP as NPN, resulting from 0% of SRU and 100% of RU; 40 NPN/50 SRU: 40% of concentrate CP as NPN, resulting from 50% of SRU and 50% of RU; 40 NPN/100 SRU: 40% of concentrate CP as NPN, resulting from 100% of SRU and 0% of RU; 80 NPN/100 SRU: 80% of concentrate CP as NPN, resulting from 100% of SRU and 0% of RU. Results showed that partial substitution of regular urea by slow-release urea did not alter dry matter intake, pattern of ruminal fermentation or plasma urea nitrogen concentrations and increased the total tract apparent digestibility of crude protein in steers diets. The increase in non-protein nitrogen content in crude protein of the concentrate could compromise feed intake and the efficiency of nutrient utilization in the steers fed complete diets based on low quality forage.

  14. Steering with big words: articulating ideographs in research programs

    NARCIS (Netherlands)

    Bos, Colette; Walhout, Bart; Walhout, Bart; Peine, Alexander; van Lente, Harro

    2014-01-01

    Nowadays, science should address societal challenges, such as ‘sustainability’, or ‘responsible research and innovation’. This emerging form of steering toward broad and generic goals involves the use of ‘big words’: encompassing concepts that are uncontested themselves, but that allow for multiple

  15. Steering with big words: articulating ideographs in nanotechnology

    NARCIS (Netherlands)

    Bos, Colette; Walhout, Albert; Peine, Alex; van Lente, Harro

    2014-01-01

    Nowadays, science should address societal challenges, such as ‘sustainability’, or ‘responsible research and innovation’. This emerging form of steering toward broad and generic goals involves the use of ‘big words’: encompassing concepts that are uncontested themselves, but that allow for multiple

  16. and alkali treatment of maize intake and utilization by steers

    African Journals Online (AJOL)

    mixture of urea and sunflower oilcake was used as a N supplement. These were given in a mixture with Ca, P, NaCl, minerals and vitamins (A.R.C.,. 1965) directly into the feed trough when the maize supplement was given. Digestibility study: Faeces was collected for 6 days. Collection periods for the 32 steers were.

  17. The Analysis of The Fault of Electrical Power Steering

    Directory of Open Access Journals (Sweden)

    Zhang Li Wen

    2016-01-01

    Full Text Available This paper analysis the common fault types of primary Electrical Power Steering system, meanwhile classify every fault. It provides the basis for further troubleshooting and maintenance. At the same time this paper propose a practical working principle of fault-tolerant, in order to make the EPS system more security and durability.

  18. Steering characteristic of an articulated bus under quasi steady maneuvering

    Science.gov (United States)

    Ubaidillah, Setiawan, Budi Agus; Aridharma, Airlangga Putra; Lenggana, Bhre Wangsa; Caesar, Bernardus Placenta Previo

    2018-02-01

    Articulated buses have been being preferred as public transportation modes due to their operational capacity. Therefore, passenger safety must be the priority of this public service vehicle. This research focused on the analytical approach of steering characteristics of an articulated bus when it maneuvered steadily. Such turning condition could be referred as a stability parameter of the bus for preliminary handling assessment. The analytical approach employed kinematics relationship between front and rear bodies as well as steering capabilities. The quasi steady model was developed to determine steering parameters such as turning radius, oversteer, and understeer. The mathematical model was useful for determining both coefficients of understeer and oversteer. The dimension of articulated bus followed a commonly used bus as utilized in Trans Jakarta busses. Based on the simulation, for one minimum center of the body, the turning radius was calculated about 8.8 m and 7.6 m at steady turning speed of 10 km/h. In neutral condition, the minimum road radius should be 6.5 m at 10 km/h and 6.9 m at 40 km/h. For two centers of the body and oversteer condition, the front body has the turning radius of 8.8 m, while, the rear body has the turning radius of 9.8 m at both turning speeds of 40 km/h. The other steering parameters were discussed accordingly.

  19. 76 FR 21802 - Advisory Committee on the Readjustment of Veterans Notice of Meeting

    Science.gov (United States)

    2011-04-18

    ... VA mental health program activities with special attention to mental health services for retuning war... for operations. The Committee will conduct a strategic planning session to formulate recommendations...

  20. The Nutrition Transition in Africa: Can It Be Steered into a More Positive Direction?

    Directory of Open Access Journals (Sweden)

    Barrie M. Margetts

    2011-04-01

    Full Text Available The objective of this narrative review is to examine the nutrition transition and its consequences when populations in Africa modernize as a result of socio-economic development, urbanization, and acculturation. The focus is on the changes in dietary patterns and nutrient intakes during the nutrition transition, the determinants and consequences of these changes as well as possible new approaches in public health nutrition policies, interventions and research needed to steer the nutrition transition into a more positive direction in Africa. The review indicates that non-communicable, nutrition-related diseases have emerged in sub-Saharan Africa at a faster rate and at a lower economic level than in industrialized countries, before the battle against under-nutrition has been won. There is a putative epigenetic link between under- and over-nutrition, explaining the double burden of nutrition-related diseases in Africa. It is concluded that it is possible to steer the nutrition transition into a more positive direction, provided that some basic principles in planning public health promotion strategies, policies and interventions are followed. It is suggested that sub-Saharan African countries join forces to study the nutrition transition and implemented interventions on epidemiological, clinical and molecular (genetic level for better prevention of both under- and over-nutrition.

  1. 76 FR 26253 - Marine Fisheries Advisory Committee Meeting

    Science.gov (United States)

    2011-05-06

    ...; National Ocean Policy, coastal and marine spatial planning, ocean energy and climate change adaptation... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration RIN 0648-XA412 Marine Fisheries Advisory Committee Meeting AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and...

  2. 12 CFR 630.6 - Funding Corporation committees.

    Science.gov (United States)

    2010-01-01

    ... in its minutes its agreement or disagreement with the item(s) under review. (ii) External auditors... and plans for senior officers and employees. The compensation committee must approve the overall...

  3. 9 CFR 147.43 - General Conference Committee.

    Science.gov (United States)

    2010-01-01

    ... committee members will include, but not be limited to: Advertisements in at least two industry journals... Plan. (2) Advise and make yearly recommendations to the Department with respect to the NPIP budget well...

  4. Pulsed Power Peer Review Committee Report

    International Nuclear Information System (INIS)

    BLOOMQUIST, DOUGLAS D.

    2002-01-01

    In 1993, the Government Performance and Results Act (GPRA, PL 103-62) was enacted. GPRA, which applies to all federal programs, has three components: strategic plans, annual performance plans, and metrics to show how well annual plans are being followed. As part of meeting the GRPA requirement in FY2002, a 15-member external review committee chaired by Dr. Alvin Trivelpiece (the Trivelpiece Committee) was convened by Sandia National Laboratories (SNL) on May 7-9, 2002 to review Sandia National Laboratories' Pulsed Power Programs as a component of the Performance Appraisal Process negotiated with the National Nuclear Security Administration of the Department of Energy (NNSA/DOE). The scope of the review included activities in high energy density physics (HEDP), inertial confinement fusion (ICF), radiation/weapon physics, the petawatt laser initiative (PW) and fast ignition, equation-of-state studies, radiation effects science and lethality, x-ray radiography, ZR development, basic research and pulsed power technology research and development, as well as electromagnetics and work for others. In his charge to the Committee, Dr. Jeffrey P. Quintenz, Director of Pulsed Power Sciences (Org. 1600) asked that the evaluation and feedback be based on three criteria: (1) quality of technical activities in science, technology, and engineering, (2) programmatic performance, management, and planning, and (3) relevance to national needs and agency missions. In addition, the director posed specific programmatic questions. The accompanying report, produced as a SAND document, is the report of the Committee's finding

  5. 77 FR 53920 - NASA Federal Advisory Committees

    Science.gov (United States)

    2012-09-04

    ... Administration, and in accordance with the Memorandum for the Heads of Executive Departments and Agencies signed... Council and eight (8) Committees: Aeronautics; Audit, Finance and Analysis; Commercial Space; Education... agencies, of which NASA is a member) on U.S. space- based PNT policy, planning, program management, and...

  6. [Responsibilities of ethics committees].

    Science.gov (United States)

    von Bergmann, K

    2000-05-01

    Increasing numbers of clinical research projects are submitted to ethical committees (institutional review boards) for approval. New therapeutic developments have to be evaluated by these committees to protect patients/volunteers. Thus, the responsibility of ethical committees is increasing. The "Nürnberger Kodex" and the "Declaration of Helsinki" are the background for these evaluations. According to the German drug law the physician is obligated by law to submit the protocol to such a committee. In addition, local state physician authorities require such a procedure. Important considerations during the review process besides ethical aspects are the informed consent, which should be written in an understandable form, and the obligations of the insurance.

  7. Consensus, contracts, and committees.

    Science.gov (United States)

    Moreno, J D

    1991-08-01

    Following a brief account of the puzzle that ethics committees present for the Western Philosophical tradition, I will examine the possibility that social contract theory can contribute to a philosophical account of these committees. Passing through classical as well as contemporary theories, particularly Rawls' recent constructivist approach, I will argue that social contract theory places severe constraints on the authority that may legitimately be granted to ethics committees. This, I conclude, speaks more about the suitability of the theory to this level of analysis than about the ethics committee phenomenon itself.

  8. Current steering with partial tripolar stimulation mode in cochlear implants.

    Science.gov (United States)

    Wu, Ching-Chih; Luo, Xin

    2013-04-01

    The large spread of excitation is a major cause of poor spectral resolution for cochlear implant (CI) users. Partial tripolar (pTP) mode has been proposed to reduce current spread by returning an equally distributed fraction (0.5 × σ) of current to two flanking electrodes and the rest to an extra-cochlear ground. This study tested the efficacy of incorporating current steering into pTP mode to add spectral channels. Different proportions of current [α × σ and (1 - α) × σ] were returned to the basal and apical flanking electrodes respectively to shape the electric field. Loudness and pitch perception with α from 0 to 1 in steps of 0.1 was simulated with a computational model of CI stimulation and tested on the apical, middle, and basal electrodes of six CI subjects. The highest σ allowing for full loudness growth within the implant compliance limit was chosen for each main electrode. Pitch ranking was measured between pairs of loudness-balanced steered pTP stimuli with an α interval of 0.1 at the most comfortable level. Results demonstrated that steered pTP stimuli with α around 0.5 required more current to achieve equal loudness than those with α around 0 or 1, maybe due to more focused excitation patterns. Subjects usually perceived decreasing pitches as α increased from 0 to 1, somewhat consistent with the apical shift of the center of gravity of excitation pattern in the model. Pitch discrimination was not better with α around 0.5 than with α around 0 or 1, except for some subjects and electrodes. For three subjects with better pitch discrimination, about half of the pitch ranges of two adjacent main electrodes overlapped with each other in steered pTP mode. These results suggest that current steering with focused pTP mode may improve spectral resolution and pitch perception with CIs.

  9. 75 FR 65636 - Office of the National Coordinator for Health Information Technology; HIT Standards Committee...

    Science.gov (United States)

    2010-10-26

    ... Technology; HIT Standards Committee Advisory Meeting; Notice of Meeting AGENCY: Office of the National... Information Technology (ONC). The meeting will be open to the public. Name of Committee: HIT Standards... Strategic Plan, and in accordance with policies developed by the HIT Policy Committee. Date and Time: The...

  10. 75 FR 5595 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2010-02-03

    ... Technology HIT Standards Committee Advisory Meeting; Notice of Meeting AGENCY: Office of the National... Health Information Technology (ONC). The meeting will be open to the public. Name of Committee: HIT... Federal Health IT Strategic Plan, and in accordance with policies developed by the HIT Policy Committee...

  11. 75 FR 57027 - Office of the National Coordinator for Health Information Technology; HIT Standards Committee...

    Science.gov (United States)

    2010-09-17

    ... Technology; HIT Standards Committee Advisory Meeting; Notice of Meeting AGENCY: Office of the National... Information Technology (ONC). The meeting will be open to the public. Name of Committee: HIT Standards... Strategic Plan, and in accordance with policies developed by the HIT Policy Committee. Date and Time: The...

  12. 76 FR 28784 - HIT Standards Committee's Workgroup Meetings; Notice of Meetings

    Science.gov (United States)

    2011-05-18

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee's Workgroup Meetings; Notice of... be open to the public via dial-in access only. Name of Committees: HIT Standards Committee's... implementation of the Federal Health IT Strategic Plan, and in accordance with policies developed by the HIT...

  13. 76 FR 50736 - HIT Standards Committee's Workgroup Meetings; Notice of Meetings

    Science.gov (United States)

    2011-08-16

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee's Workgroup Meetings; Notice of... be open to the public via dial-in access only. Name of Committees: HIT Standards Committee's... implementation of the Federal Health IT Strategic Plan, and in accordance with policies developed by the HIT...

  14. 76 FR 14975 - HIT Standards Committee's Workgroup Meetings; Notice of Meetings

    Science.gov (United States)

    2011-03-18

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee's Workgroup Meetings; Notice of... be open to the public via dial-in access only. Name of Committees: HIT Standards Committee's... implementation of the Federal Health IT Strategic Plan, and in accordance with policies developed by the HIT...

  15. 75 FR 21628 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2010-04-26

    ... Technology HIT Standards Committee Advisory Meeting; Notice of Meeting AGENCY: Office of the National... Information Technology (ONC). The meeting will be open to the public. Name of Committee: HIT Standards... Strategic Plan, and in accordance with policies developed by the HIT Policy Committee. Date and Time: The...

  16. 75 FR 42090 - Office of the National Coordinator for Health Information Technology; HIT Standards Committee...

    Science.gov (United States)

    2010-07-20

    ... Technology; HIT Standards Committee Advisory Meeting; Notice of Meeting AGENCY: Office of the National... Information Technology (ONC). The meeting will be open to the public. Name of Committee: HIT Standards... Strategic Plan, and in accordance with policies developed by the HIT Policy Committee. Date and Time: The...

  17. 75 FR 31419 - Agenda and Notice of Public Meeting of the Arizona Advisory Committee

    Science.gov (United States)

    2010-06-03

    ... Civil Rights (Commission), and the Federal Advisory Committee Act (FACA), that a planning meeting of the... COMMISSION ON CIVIL RIGHTS Agenda and Notice of Public Meeting of the Arizona Advisory Committee... and after the meeting. Persons interested in the work of this advisory committee are advised to go to...

  18. 76 FR 30244 - Veterans' Rural Health Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2011-05-24

    ... on health care issues affecting enrolled Veterans residing in rural areas. The Committee examines... Rural Health Strategic Plan discussion and work session and the other is the Committee's annual report... DEPARTMENT OF VETERANS AFFAIRS Veterans' Rural Health Advisory Committee; Notice of Meeting The...

  19. 77 FR 27832 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-05-11

    ... organizations --Relations with non-governmental organizations --World Maritime Day --International Maritime... DEPARTMENT OF STATE [Public Notice: 7879] Shipping Coordinating Committee; Notice of Committee...-second Session of the International Maritime Organization (IMO) Technical Co-operation Committee (TCC 62...

  20. Strategic planning in an academic radiation medicine program

    Science.gov (United States)

    Hamilton, J.L.; Foxcroft, S.; Moyo, E.; Cooke-Lauder, J.; Spence, T.; Zahedi, P.; Bezjak, A.; Jaffray, D.; Lam, C.; Létourneau, D.; Milosevic, M.; Tsang, R.; Wong, R.; Liu, F.F.

    2017-01-01

    Background In this paper, we report on the process of strategic planning in the Radiation Medicine Program (rmp) at the Princess Margaret Cancer Centre. The rmp conducted a strategic planning exercise to ensure that program priorities reflect the current health care environment, enable nimble responses to the increasing burden of cancer, and guide program operations until 2020. Methods Data collection was guided by a project charter that outlined the project goal and the roles and responsibilities of all participants. The process was managed by a multidisciplinary steering committee under the guidance of an external consultant and consisted of reviewing strategic planning documents from close collaborators and institutional partners, conducting interviews with key stakeholders, deploying a program-wide survey, facilitating an anonymous and confidential e-mail feedback box, and collecting information from group deliberations. Results The process of strategic planning took place from December 2014 to December 2015. Mission and vision statements were developed, and core values were defined. A final document, Strategic Roadmap to 2020, was established to guide programmatic pursuits during the ensuing 5 years, and an implementation plan was developed to guide the first year of operations. Conclusions The strategic planning process provided an opportunity to mobilize staff talents and identify environmental opportunities, and helped to enable more effective use of resources in a rapidly changing health care environment. The process was valuable in allowing staff to consider and discuss the future, and in identifying strategic issues of the greatest importance to the program. Academic programs with similar mandates might find our report useful in guiding similar processes in their own organizations. PMID:29270061

  1. Strategic planning in an academic radiation medicine program.

    Science.gov (United States)

    Hamilton, J L; Foxcroft, S; Moyo, E; Cooke-Lauder, J; Spence, T; Zahedi, P; Bezjak, A; Jaffray, D; Lam, C; Létourneau, D; Milosevic, M; Tsang, R; Wong, R; Liu, F F

    2017-12-01

    In this paper, we report on the process of strategic planning in the Radiation Medicine Program (rmp) at the Princess Margaret Cancer Centre. The rmp conducted a strategic planning exercise to ensure that program priorities reflect the current health care environment, enable nimble responses to the increasing burden of cancer, and guide program operations until 2020. Data collection was guided by a project charter that outlined the project goal and the roles and responsibilities of all participants. The process was managed by a multidisciplinary steering committee under the guidance of an external consultant and consisted of reviewing strategic planning documents from close collaborators and institutional partners, conducting interviews with key stakeholders, deploying a program-wide survey, facilitating an anonymous and confidential e-mail feedback box, and collecting information from group deliberations. The process of strategic planning took place from December 2014 to December 2015. Mission and vision statements were developed, and core values were defined. A final document, Strategic Roadmap to 2020, was established to guide programmatic pursuits during the ensuing 5 years, and an implementation plan was developed to guide the first year of operations. The strategic planning process provided an opportunity to mobilize staff talents and identify environmental opportunities, and helped to enable more effective use of resources in a rapidly changing health care environment. The process was valuable in allowing staff to consider and discuss the future, and in identifying strategic issues of the greatest importance to the program. Academic programs with similar mandates might find our report useful in guiding similar processes in their own organizations.

  2. Use beam steering dipoles to minimize aberrations associated with off-centered transit through the induction bunching module. Design an improved NDCX-I drift compression section to make best use of the new bunching module to optimize planned initial NDCX-I target experiments

    International Nuclear Information System (INIS)

    HIFS-VNL; Seidl, Peter; Seidl, P.; Barnard, J.; Bieniosek, F.; Coleman, J.; Grote, D.; Leitner, M.; Gilson, E.; Logan, B.G.; Lund, S.; Lidia, S.; Ni, P.; Ogata, D.; Roy, P.; Waldron, W.; Welch, D.; Wooton, C.

    2008-01-01

    This milestone has been met by: (1) calculating steering solutions and implementing them in the experiment using the three pairs of crossed magnetic dipoles installed in between the matching solenoids, S1-S4. We have demonstrated the ability to center the beam position and angle to < 1 mm and < 1 mrad upstream of the induction bunching module (IBM) gap, compared to uncorrected beam offsets of several millimeters and milli-radians. (2) Based on LSP and analytic study, the new IBM, which has twice the volt-seconds of our first IBM, should be accompanied by a longer drift compression section in order to achieve a predicted doubling of the energy deposition on future warm-dense matter targets. This will be accomplished by constructing a longer ferro-electric plasma source. (3) Because the bunched current is a function of the longitudinal phase space and emittance of the beam entering the IBM we have characterized the longitudinal phase space with a high-resolution energy analyzer

  3. Collective multipartite Einstein-Podolsky-Rosen steering: more secure optical networks.

    Science.gov (United States)

    Wang, Meng; Gong, Qihuang; He, Qiongyi

    2014-12-01

    Collective multipartite Einstein-Podolsky-Rosen (EPR) steering is a type of quantum correlation shared among N parties, where the EPR paradox of one party can only be realized by performing local measurements on all the remaining N-1 parties. We formalize the collective tripartite steering in terms of local hidden state model and give the steering inequalities that act as signatures and suggest how to optimize collective tripartite steering in specific optical schemes. The special entangled states with property of collective multipartite steering may have potential applications in ultra-secure multiuser communication networks where the issue of trust is critical.

  4. The Impact of Analog and Bang-Bang Steering Gear Control on Ship's Fuel Economy

    DEFF Research Database (Denmark)

    Nørtoft Thomsen, J. C.; Blanke, Mogens; Reid, R. E.

    1982-01-01

    it is found to be at least equally important regarding steering performance and fuel economy. The paper presents a comprehensive survey of steering gear principles commonly used, including relevant details of three analog steering gear servo principles, which have outperformed conventional designs. Control......The latest years have shown considerable efforts towards improving steering generated propulsion losses of ships by the introduction of various sophisticated control algorithms in the autopilots. However, little previous attention has been given to the steering gear control loop, although...

  5. Committee on Science

    Science.gov (United States)

    SCIENCE ADVISOR WASHINGTON, DC -- Today, House Science Committee Chairman Sherwood Boehlert (R-NY23) and Advisor nominee Dr. John H. Marburger. The Senate Commerce Committee has scheduled a nomination hearing for this afternoon, and Boehlert and Grucci have been invited to testify. Dr. Marburger was nominated

  6. LOCAL ORGANIZING COMMITTEE

    Indian Academy of Sciences (India)

    Prof. B. B. P. Gupta

    INDIAN ACADEMY OF SCIENCES. Bengaluru. 83rd ANNUAL MEETING. 3–5 November 2017, NEHU, Shillong. LOCAL ORGANIZING COMMITTEE. Local Organizing Committee. 1. Prof. S. K. Srivastava. Chairman. Vice-Chancellor, NEHU, Shillong. 2. Prof. B. B. P. Gupta. Organising Secretary. Department of Zoology ...

  7. Study on a New Steering Mechanism for Point-the-Bit Rotary Steerable System

    Directory of Open Access Journals (Sweden)

    Yuanzhi Li

    2014-02-01

    Full Text Available This paper presents a novel steering mechanism embedded in a point-the-bit rotary steerable system (RSS for oilfield exploitation. The new steering mechanism adopts a set of universal joints to alleviate the high alternative strain on drilling mandrel and employs a specially designed planetary gear small tooth number difference (PGSTD to achieve directional steering. Its principle and characteristics are explained and examined through a series of analyses. First, the eccentric displacement vector of the offset point on the drilling mandrel is formulated and kinematic solutions are established. Next, structural design for the new steering mechanism is addressed. Then, procedures and program architectures for simulating offset state of the drilling mandrel and motion trajectory of the whole steering mechanism are presented. After that, steering motion simulations of the new steering mechanism for both 2D and 3D well trajectories are then performed by combining LabVIEW and SolidWorks. Finally, experiments on the steering motion control of the new steering mechanism prototype are carried out. The simulations and experiments reveal that the steering performance of the new steering mechanism is satisfied. The research can provide good guidance for further research and engineering application of the point-the-bit RSS.

  8. Development of active rear steer actuator. Development of four wheel steer actuator for active safety; Active rear steer actuator no kaihatsu. Yobo anzen ni muketa 4WS actuator no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Yamanaka, T [Aisin Seiki Co. Ltd., Aichi (Japan)

    1997-10-01

    Recently, ecology, energy saving and safety have become important issues. And Active Safety is spotlighted in vehicle control area. Many researches and developments on four wheel steer system have been done to improve vehicle stability. We have developed the Active Rear Steer system with electromechanical Actuator, which is mass-productive, compact, and high response and durable. 10 figs., 5 tabs.

  9. Modeling of Driver Steering Operations in Lateral Wind Disturbances toward Driver Assistance System

    Science.gov (United States)

    Kurata, Yoshinori; Wada, Takahiro; Kamiji, Norimasa; Doi, Shun'ichi

    Disturbances decrease vehicle stability and increase driver's mental and physical workload. Especially unexpected disturbances such as lateral winds have severe effect on vehicle stability and driver's workload. This study aims at building a driver model of steering operations in lateral wind toward developing effective driver assistance system. First, the relationship between the driver's lateral motion and its reactive quick steering behavior is investigated using driving simulator with lateral 1dof motion. In the experiments, four different wind patterns are displayed by the simulator. As the results, strong correlation was found between the driver's head lateral jerk by the lateral disturbance and the angular acceleration of the steering wheel. Then, we build a mathematical model of driver's steering model from lateral disturbance input to steering torque of the reactive quick feed-forward steering based on the experimental results. Finally, validity of the proposed model is shown by comparing the steering torque of experimental results and that of simulation results.

  10. Corporate Social Responsibility and Tax Planning : Rules and Principles

    NARCIS (Netherlands)

    Gribnau, Hans; Salter, David; Oats, Lynne

    2016-01-01

    Taxpayers have to plan their tax affairs to plan their life or develop their business strategy. Often tax planning is encouraged and intended by tax legislation. Tax incentives are often used to steer (corporate) citizens’ behaviour to achieve all kind of policy goals. In this way, the tax

  11. Corporate social responsibility and tax planning : Not by rules alone

    NARCIS (Netherlands)

    Gribnau, Hans

    2015-01-01

    Taxpayers have to plan their tax affairs to plan their life or develop their business strategy. Often tax planning is encouraged and intended by tax legislation, but sometimes it is not. By way of tax incentives the tax legislator often tries to steer citizens’ behaviour to achieve all kind of

  12. Pesticide Program Dialogue Committee (PPDC)

    Science.gov (United States)

    The Pesticide Program Dialogue Committee, a permanent, broadly representative advisory committee, meets with EPA on a regular basis to discuss pesticide regulatory, policy, and program implementation issues.

  13. My university. What I learned from the Productive Cooperative Movement to Promotion of Humanistic Family Planning.

    Science.gov (United States)

    Kunii, C

    1990-07-01

    Based on experiences with the Productive Cooperative Movement and the Parasite Control Movement in Japan, the Japanese Family Planning Movement began in April 1954. The resultant private and nonprofit Japan Family Planning Association (JFPA) followed and it served to help Japan achieve its goal of reducing fertility by promoting family planning. It did so by publishing a monthly newsletter on family planning, hosting meetings and national conventions, spreading information via the mass media, and selling contraceptives and educational materials. JFPA earned funding from these sales with no support from the government thereby establishing self dependence and freedom to speak candidly to the government. The JFPA learned that families wanted to improve their standard of living and were willing to limit family size to 2 children. After the birth rate peaked in 1955, the birth rate and the number of illegal abortions decreased. In the 1950s, JFPA joined the International Planned Parenthood Federation and subsequently learned of the problems faced by developing countries. Based on the successful reduction of fertility in Japan and a strong economic base, JFPA and the government were in a position to organize an international cooperation program for family planning. Therefore, the leader of JFPA resigned to found the Japanese Organization for International Cooperation in Family Planning which promotes family planning in developing countries via its integrated family planning, nutrition, and parasite control program. A steering committee composed of leaders from government, universities, and private organizations sets the policies for the program in each country. It is to the Japanese government's advantage to work with private organizations instead of providing all social services because they are flexible and provide administrative stability and national expenses are minimized.

  14. Adiabatic photo-steering theory in topological insulators

    Science.gov (United States)

    Inoue, Jun-ichi

    2014-12-01

    Feasible external control of material properties is a crucial issue in condensed matter physics. A new approach to achieving this aim, named adiabatic photo-steering, is reviewed. The core principle of this scheme is that several material constants are effectively turned into externally tunable variables by irradiation of monochromatic laser light. Two-dimensional topological insulators are selected as the optimal systems that exhibit a prominent change in their properties following the application of this method. Two specific examples of photo-steered quantum phenomena, which reflect topological aspects of the electronic systems at hand, are presented. One is the integer quantum Hall effect described by the Haldane model, and the other is the quantum spin Hall effect described by the Kane-Mele model. The topological quantities associated with these phenomena are the conventional Chern number and spin Chern number, respectively. A recent interesting idea, time-reversal symmetry breaking via a temporary periodic external stimulation, is also discussed.

  15. Optimization of Steering System of Forklift Vehicle for Idle Performance

    Directory of Open Access Journals (Sweden)

    Yuan Shen

    2015-01-01

    Full Text Available This paper presents an optimal design process for the steering system of a forklift vehicle. An efficient procedure for minimizing the engine-induced idle vibration is developed in this study. Reciprocating unbalance and gas pressure torque as two major sources of engine excitation are studied. Using the field vibration tests and FEM analysis, the cause and characteristics of steering system’s idle vibration are recognized. So as to distribute the characteristic modes based on the optimization strategy, global sensitivity analysis of the main parameters is also carried out to achieve the optimal combination of the optimization factors. Based on all analysis above, some structure modifications for optimization are presented to control the idle vibration. The effectiveness and rationality of the improvements are also verified through experimental prototyping testing. This study also makes it possible to provide a design guideline using CAE (computer aided engineering analysis for some other objects.

  16. Spatially distributed multipartite entanglement enables EPR steering of atomic clouds

    Science.gov (United States)

    Kunkel, Philipp; Prüfer, Maximilian; Strobel, Helmut; Linnemann, Daniel; Frölian, Anika; Gasenzer, Thomas; Gärttner, Martin; Oberthaler, Markus K.

    2018-04-01

    A key resource for distributed quantum-enhanced protocols is entanglement between spatially separated modes. However, the robust generation and detection of entanglement between spatially separated regions of an ultracold atomic system remain a challenge. We used spin mixing in a tightly confined Bose-Einstein condensate to generate an entangled state of indistinguishable particles in a single spatial mode. We show experimentally that this entanglement can be spatially distributed by self-similar expansion of the atomic cloud. We used spatially resolved spin read-out to reveal a particularly strong form of quantum correlations known as Einstein-Podolsky-Rosen (EPR) steering between distinct parts of the expanded cloud. Based on the strength of EPR steering, we constructed a witness, which confirmed genuine 5-partite entanglement.

  17. Steering the dynamics within reduced space through quantum learning control

    International Nuclear Information System (INIS)

    Kim, Young Sik

    2003-01-01

    In quantum dynamics of many-body systems, to identify the Hamiltonian becomes more difficult very rapidly as the number of degrees of freedom increases. In order to simplify the dynamics and to deduce dynamically relevant Hamiltonian information, it is desirable to control the dynamics to lie within a reduced space. With a judicious choice for the cost functional, the closed loop optimal control experiments can be manipulated efficiently to steer the dynamics to lie within a subspace of the system eigenstates without requiring any prior detailed knowledge about the system Hamiltonian. The procedure is simulated for optimally controlled population transfer experiments in the system of two degrees of freedom. To show the feasibility of steering the dynamics to lie in a specified subspace, the learning algorithms guiding the dynamics are presented along with frequency filtering. The results demonstrate that the optimal control fields derive the system to the desired target state through the desired subspace

  18. Detailed field test of yaw-based wake steering

    DEFF Research Database (Denmark)

    Fleming, P.; Churchfield, M.; Scholbrock, A.

    2016-01-01

    production. In the first phase, a nacelle-mounted scanning lidar was used to verify wake deflection of a misaligned turbine and calibrate wake deflection models. In the second phase, these models were used within a yaw controller to achieve a desired wake deflection. This paper details the experimental......This paper describes a detailed field-test campaign to investigate yaw-based wake steering. In yaw-based wake steering, an upstream turbine intentionally misaligns its yaw with respect to the inflow to deflect its wake away from a downstream turbine, with the goal of increasing total power...... design and setup. All data collected as part of this field experiment will be archived and made available to the public via the U.S. Department of Energy’s Atmosphere to Electrons Data Archive and Portal....

  19. EFFECT OF POULTRY MEAL ON THE PERFORMANCE OF FEEDLOT STEERS

    Directory of Open Access Journals (Sweden)

    A. Cabrera-Nuñez

    2014-08-01

    Full Text Available The aim of this study was to evaluate the effect of poultry meal on weight gain and carcass yield, under a housing system. 30 Swiss x Zebu steers were used, with an approximate weight of 353 kg, which were assigned under a completely randomized design in three treatments. T1 (control concentrate without poultry meal; T2 concentrate + 30% poultry meal and T3 concentrate + 35% poultry meal. The composition of the concentrate was based on ground sorghum, maize grain, wheat bran, ground mineral salt bale with 18% crude protein and 70% TDN. A significant effect (p ≤ 0.05 on the percentage of carcass weight of 53.0 was observed; 59.5 and 58.8% for T1, T2 and T3, respectively. The results indicate that supplementation based poultry meal 35% promoted greater yield in feedlot steers.

  20. Steering and filtering white light with resonant waveguide gratings

    Science.gov (United States)

    Quaranta, Giorgio; Basset, Guillaume; Martin, Olivier J. F.; Gallinet, Benjamin

    2017-08-01

    A novel thin-film single-layer structure based on resonant waveguide gratings (RWGs) allows to engineer selective color filtering and steering of white light. The unit cell of the structure consists of two adjacent finite-length and cross-talking RWGs, where the former acts as in-coupler and the latter acts as out-coupler. The structure is made by only one nano-imprint lithography replication and one thin film layer deposition, making it fully compatible with up-scalable fabrication processes. We characterize a fabricated optical security element designed to work with the flash and the camera of a smartphone in off-axis light steering configuration, where the pattern is revealed only by placing the smartphone in the proper position. Widespread applications are foreseen in a variety of fields, such as multifocal or monochromatic lenses, solar cells, biosensors, security devices and seethrough optical combiners for near-eye displays.

  1. Human sperm steer with second harmonics of the flagellar beat.

    Science.gov (United States)

    Saggiorato, Guglielmo; Alvarez, Luis; Jikeli, Jan F; Kaupp, U Benjamin; Gompper, Gerhard; Elgeti, Jens

    2017-11-10

    Sperm are propelled by bending waves traveling along their flagellum. For steering in gradients of sensory cues, sperm adjust the flagellar waveform. Symmetric and asymmetric waveforms result in straight and curved swimming paths, respectively. Two mechanisms causing spatially asymmetric waveforms have been proposed: an average flagellar curvature and buckling. We image flagella of human sperm tethered with the head to a surface. The waveform is characterized by a fundamental beat frequency and its second harmonic. The superposition of harmonics breaks the beat symmetry temporally rather than spatially. As a result, sperm rotate around the tethering point. The rotation velocity is determined by the second-harmonic amplitude and phase. Stimulation with the female sex hormone progesterone enhances the second-harmonic contribution and, thereby, modulates sperm rotation. Higher beat frequency components exist in other flagellated cells; therefore, this steering mechanism might be widespread and could inspire the design of synthetic microswimmers.

  2. 78 FR 2479 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2013-01-11

    ... thermal performance of immersion suits; --Development of amendments to the LSA Code for free-fall....2 and 29.4.2, clarifying the requirements for steering gear trials; --Work programme --Any other...

  3. Workshop on automated beam steering and shaping (ABS). Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Lindroos, M [ed.

    1999-09-10

    A workshop on Automated Beam Steering and Shaping (ABS) was held at CERN in December 1998. This was the first workshop dedicated to this subject. The workshop had two major goals: to review the present status of ABS algorithms and systems around the world and to create a worldwide ABS community. These proceedings contain summary reports from all sessions, contributions from several presentations held at the workshop, and a complete set of abstracts for all presentations. (orig.)

  4. Automation of Armored Four Wheel Counter Steer Vehicles

    Science.gov (United States)

    2015-08-28

    additions to the cabin, such as displays, servos , and controls, require a small footprint and cannot impede critical systems (e.g., fire control) or...autopilot. The steering system engages until the man- ual/emergency override button is pressed . To engage the velocity control mode, the operator...engaged if the need arises. Once the error is cleared, pressing the manual override button places the system back into ready mode. FIGURE 3. The software

  5. Optimum steering of photon beam lines in SPEAR

    International Nuclear Information System (INIS)

    Corbett, W.J.; Fong, B.; Lee, M.; Ziemann, V.

    1993-04-01

    A common operational requirement for many synchrotron light sources is to maintain steered photon beamlines with minimum corrector strength values. To solve this problem for SPEAR, we employed the Singular Value Decomposition (SVD) matrix-inversion technique to minimize corrector strengths while constraining the photon beamlines to remain on target. The result was a reduction in corrector strengths, yielding increased overhead for the photon-beam position feedback systems

  6. Workshop on automated beam steering and shaping (ABS). Proceedings

    International Nuclear Information System (INIS)

    Lindroos, M.

    1999-01-01

    A workshop on Automated Beam Steering and Shaping (ABS) was held at CERN in December 1998. This was the first workshop dedicated to this subject. The workshop had two major goals: to review the present status of ABS algorithms and systems around the world and to create a worldwide ABS community. These proceedings contain summary reports from all sessions, contributions from several presentations held at the workshop, and a complete set of abstracts for all presentations. (orig.)

  7. Entanglement, Einstein-Podolsky-Rosen correlations, Bell nonlocality, and steering

    International Nuclear Information System (INIS)

    Jones, S. J.; Wiseman, H. M.; Doherty, A. C.

    2007-01-01

    In a recent work [Phys. Rev. Lett. 98, 140402 (2007)] we defined 'steering', a type of quantum nonlocality that is logically distinct from both nonseparability and Bell nonlocality. In the bipartite setting, it hinges on the question of whether Alice can affect Bob's state at a distance through her choice of measurement. More precisely and operationally, it hinges on the question of whether Alice, with classical communication, can convince Bob that they share an entangled state under the circumstances that Bob trusts nothing that Alice says. We argue that if she can, then this demonstrates the nonlocal effect first identified in the famous Einstein-Podolsky-Rosen paper [Phys. Rev. 47, 777 (1935)] as a universal effect for pure entangled states. This ability of Alice to remotely prepare Bob's state was subsequently called steering by Schroedinger, whose terminology we adopt. The phenomenon of steering has been largely overlooked, and prior to our work had not even been given a rigorous definition that is applicable to mixed states as well as pure states. Armed with our rigorous definition, we proved that steerable states are a strict subset of the entangled states, and a strict superset of the states that can exhibit Bell nonlocality. In this work we expand on these results and provide further examples of steerable states. We also elaborate on the connection with the original EPR paradox

  8. Entanglement, Einstein-Podolsky-Rosen correlations, Bell nonlocality, and steering

    Science.gov (United States)

    Jones, S. J.; Wiseman, H. M.; Doherty, A. C.

    2007-11-01

    In a recent work [Phys. Rev. Lett. 98, 140402 (2007)] we defined “steering,” a type of quantum nonlocality that is logically distinct from both nonseparability and Bell nonlocality. In the bipartite setting, it hinges on the question of whether Alice can affect Bob’s state at a distance through her choice of measurement. More precisely and operationally, it hinges on the question of whether Alice, with classical communication, can convince Bob that they share an entangled state under the circumstances that Bob trusts nothing that Alice says. We argue that if she can, then this demonstrates the nonlocal effect first identified in the famous Einstein-Podolsky-Rosen paper [Phys. Rev. 47, 777 (1935)] as a universal effect for pure entangled states. This ability of Alice to remotely prepare Bob’s state was subsequently called steering by Schrödinger, whose terminology we adopt. The phenomenon of steering has been largely overlooked, and prior to our work had not even been given a rigorous definition that is applicable to mixed states as well as pure states. Armed with our rigorous definition, we proved that steerable states are a strict subset of the entangled states, and a strict superset of the states that can exhibit Bell nonlocality. In this work we expand on these results and provide further examples of steerable states. We also elaborate on the connection with the original EPR paradox.

  9. Design of a steering stabilizer based on CAN bus

    Science.gov (United States)

    Zhan, Zhaomin; Yan, Yibin

    2018-04-01

    This design realizes a posture correction device of griping steering wheel based on CAN bus, which is embedded in the steering wheel of vehicles. The system aims to detect the drivers' abnormal griping postures and provides drivers with classification alerts, by combining the recorded griping postures data and the vehicle speed data that are obtained via the CAN bus. The warning information are automatically stored and retained in the device for 12 months. To enhance the alerting effect, the count of this warning message for both the latest month and the last 12 months are displayed on the dashboard panel. In addition to prevent itself from being blocked and self-detect any faults in advance, the appliance also provide a self-test function, which will communicate with the integrated instrument system in vehicle and do simulation test right after the vehicle power on. This appliance can help to urge and ensure drivers to operate the steering wheel correctly, effectively, and timely; prevent some typical incorrect behaviors which commonly happen along with the change of griping postures, such as the using cellphone, and ultimately, reduce the incidence of traffic accidents.

  10. Optimization of steering elements in the RIA driver linac

    International Nuclear Information System (INIS)

    Lessner, E. S.; Aseev, V. S.; Ostroumov, P. N.; Physics

    2005-01-01

    The driver linac of the projected RIA facility is a versatile accelerator, a 1.4-GV, CW superconducting (SC) linac designed to simultaneously accelerate several heavy-ion charge states, providing beams from proton to uranium at 400 MeV/u at power levels at a minimum of 100 kW and up to 400 kW for most beams. Acceleration of multiple-charge-state uranium beams places stringent requirements on the linac design. A steering algorithm was derived that fulfilled the driver's real estate requirements, such as placement of steering dipole coils on SC solenoids and of beam position monitors outside cryostats, and beam-dynamics requirements, such as coupling effects induced by the focusing solenoids. The algorithm has been fully integrated into the tracking code TRACK and it is used to study and optimize the number and position of steering elements that minimize the multiple-beam centroid oscillations and preserve the beam emittance under misalignments of accelerating and transverse focusing elements in the driver linac

  11. Geometrodynamic steering principle reveals the determiners of inertia

    International Nuclear Information System (INIS)

    Wheeler, J.A.

    1988-01-01

    What shall the authors need to grasp the essence of quantum gravity? One requirement, at least, is essential: to understand the steering principle of classical geometrodynamics. The authors outline here the physical content of that steering principle - heat of the so-called initial value problem - in its J.W. York, Jr. formulation. The central idea epitomizes itself in a single simple sentence: Mass-energy there determines inertia here. They spell out this steering principle both in its precise form and in its poor man's version. At both levels of analysis considerations of physics and mathematics alike require that the effective mass-energy of gravity waves must make itself felt on the spacetime geometry - and therefore on the gyro-defined local inertial frame of reference - on the same level as matter itself. Additional to the (mass)/(distance) Newtonian potential so familiar as measure of the effect of a nearby mass on the local frame is the Thirring and Lense gravitomagnetic potential, proportional to (angular momentum) x (distance vector)/(distance). The recent proposal of Ciufolini for a dual laser-ranged LAGEOS satellite to detect the thus-predicted gravitomagnetism of the earth is briefly described

  12. Einstein-Podolsky-Rosen steering: Its geometric quantification and witness

    Science.gov (United States)

    Ku, Huan-Yu; Chen, Shin-Liang; Budroni, Costantino; Miranowicz, Adam; Chen, Yueh-Nan; Nori, Franco

    2018-02-01

    We propose a measure of quantum steerability, namely, a convex steering monotone, based on the trace distance between a given assemblage and its corresponding closest assemblage admitting a local-hidden-state (LHS) model. We provide methods to estimate such a quantity, via lower and upper bounds, based on semidefinite programming. One of these upper bounds has a clear geometrical interpretation as a linear function of rescaled Euclidean distances in the Bloch sphere between the normalized quantum states of (i) a given assemblage and (ii) an LHS assemblage. For a qubit-qubit quantum state, these ideas also allow us to visualize various steerability properties of the state in the Bloch sphere via the so-called LHS surface. In particular, some steerability properties can be obtained by comparing such an LHS surface with a corresponding quantum steering ellipsoid. Thus, we propose a witness of steerability corresponding to the difference of the volumes enclosed by these two surfaces. This witness (which reveals the steerability of a quantum state) enables one to find an optimal measurement basis, which can then be used to determine the proposed steering monotone (which describes the steerability of an assemblage) optimized over all mutually unbiased bases.

  13. An investigation on motor-driven power steering-based crosswind disturbance compensation for the reduction of driver steering effort

    Science.gov (United States)

    Kim, Kyuwon; Kim, Boemjun; Go, Youngil; Park, Jaeyong; Park, Joonhong; Suh, Insoo; Yi, Kyongsu

    2014-07-01

    This paper describes a lateral disturbance compensation algorithm for an application to a motor-driven power steering (MDPS)-based driver assistant system. The lateral disturbance including wind force and lateral load transfer by bank angle reduces the driver's steering refinement and at the same time increases the possibility of an accident. A lateral disturbance compensation algorithm is designed to determine the motor overlay torque of an MDPS system for reducing the manoeuvreing effort of a human driver under lateral disturbance. Motor overlay torque for the compensation of driver's steering torque induced by the lateral disturbance consists of human torque feedback and feedforward torque. Vehicle-driver system dynamics have been investigated using a combined dynamic model which consists of a vehicle dynamic model, driver steering dynamic model and lateral disturbance model. The human torque feedback input has been designed via the investigation of the vehicle-driver system dynamics. Feedforward input torque is calculated to compensate additional tyre self-aligning torque from an estimated lateral disturbance. The proposed compensation algorithm has been implemented on a developed driver model which represents the driver's manoeuvreing characteristics under the lateral disturbance. The developed driver model has been validated with test data via a driving simulator in a crosswind condition. Human-in-the-loop simulations with a full-scale driving simulator on a virtual test track have been conducted to investigate the real-time performance of the proposed lateral disturbance compensation algorithm. It has been shown from simulation studies and human-in-the-loop simulation results that the driver's manoeuvreing effort and a lateral deviation of the vehicle under the lateral disturbance can be significantly reduced via the lateral disturbance compensation algorithm.

  14. The Optimal Steering Control System using Imperialist Competitive Algorithm on Vehicles with Steer-by-Wire System

    Directory of Open Access Journals (Sweden)

    F. Hunaini

    2015-03-01

    Full Text Available Steer-by-wire is the electrical steering systems on vehicles that are expected with the development of an optimal control system can improve the dynamic performance of the vehicle. This paper aims to optimize the control systems, namely Fuzzy Logic Control (FLC and the Proportional, Integral and Derivative (PID control on the vehicle steering system using Imperialist Competitive Algorithm (ICA. The control systems are built in a cascade, FLC to suppress errors in the lateral motion and the PID control to minimize the error in the yaw motion of the vehicle. FLC is built has two inputs (error and delta error and single output. Each input and output consists of three Membership Function (MF in the form of a triangular for language term "zero" and two trapezoidal for language term "negative" and "positive". In order to work optimally, each MF optimized using ICA to get the position and width of the most appropriate. Likewise, in the PID control, the constant at each Proportional, Integral and Derivative control also optimized using ICA, so there are six parameters of the control system are simultaneously optimized by ICA. Simulations performed on vehicle models with 10 Degree Of Freedom (DOF, the plant input using the variables of steering that expressed in the desired trajectory, and the plant outputs are lateral and yaw motion. The simulation results showed that the FLC-PID control system optimized by using ICA can maintain the movement of vehicle according to the desired trajectory with lower error and higher speed limits than optimized with Particle Swarm Optimization (PSO.

  15. 75 FR 68755 - Agenda and Notice of Public Meeting of the Kansas Advisory Committee

    Science.gov (United States)

    2010-11-09

    ... Committee (SAC) orientation and planning meeting of the Kansas Advisory Committee to the Commission will..., 2010. The purpose of this meeting is to provide SAC orientation and continue planning a civil rights... impairments may also follow the proceedings by first calling the Federal Relay Service at 1-800-977-8339 and...

  16. 75 FR 54299 - Agenda and Notice of Public Meeting of the Massachusetts State Advisory Committee

    Science.gov (United States)

    2010-09-07

    .... Commission on Civil Rights and the Federal Advisory Committee Act, that briefing and planning meetings of the... Advisory Committee to continue its work on English Language Learners. The purpose of the planning meeting... COMMISSION ON CIVIL RIGHTS Agenda and Notice of Public Meeting of the Massachusetts State Advisory...

  17. 77 FR 50985 - National Advisory Committee for Implementation of the National Forest System Land Management...

    Science.gov (United States)

    2012-08-23

    ... following business will be conducted: (1) Determine the scope and initial tasks of the committee, (2) ethics... National Forest System Land Management Planning Rule AGENCY: Forest Service, USDA. ACTION: Notice of... Management Planning Rule will meet in Washington, DC. The committee operates in compliance with the Federal...

  18. Standing Concertation Committee

    CERN Document Server

    HR Department

    2010-01-01

    Main issues examined at the meeting of 2 October 2009 The October 2009 meeting of the Standing Concertation Committee was entirely devoted to preparation of TREF’s meeting on 21-22 October. The Committee took note of, discussed and agreed on clarifications needed to some of the documents and presentations that the Management intended to submit and/or present to TREF on the following subjects: Equal opportunities The Committee took note of a preliminary report on equal opportunities at CERN drawn up by D. Chromek-Burckhart, the Equal Opportunities Officer, and T. Smith, Chairman of the Equal Opportunities Advisory Panel, containing in particular a proposal for a new process for resolving harassment conflicts. Technical analysis of the CERN Health Insurance Scheme - Actuary’s Report The Committee took note of a presentation by P. Charpentier, Chairman of the CERN Health Insurance Supervisory Board (CHIS Board), on the 2009 actuarial report on the CERN Health Insurance Scheme (CHIS). Th...

  19. Standing Concertation Committee

    CERN Document Server

    HR Department

    2008-01-01

    ORDINARY MEETING ON 27 FEBRUARY 2008 The main items discussed at the meetings of the Standing Concertation Committee on 27 February 2008 included: Short-term Saved Leave Scheme The Committee noted that, by the end of February 2008, some 600 staff had enrolled in the short-term saved leave scheme: approx. 58% had signed up for 1 slice, 14% for two slices, 5% for three slices and 23% for four slices. Administrative Circular No. 4 (Rev. 4) - Unemployment Insurance Scheme The Committee agreed to recommend the Director-General to approve Administrative Circular No. 4 (Rev. 4) - Unemployment Insurance Scheme. Administrative Circular No. 30 (Rev. 2) - Financial benefits upon taking up appointment and termination of contract The Committee agreed to recommend the Director-General to approve Administrative Circular No. 30 (Rev. 2) - Financial Benefits upon taking up appointment and termination of contract. Progressive Retirement Programme The Progressive Retirement Programme (PR...

  20. Pulsed Power Peer Review Committee Report

    International Nuclear Information System (INIS)

    Bloomquist, Douglas D.

    2000-01-01

    In 1993, the Government Performance and Results Act (GPRA, PL 103-62) was enacted. GPRA, which applies to all federal programs, has three components: strategic plans, annual performance plans, and metrics to show how well annual plans are being followed. As part of meeting the GRPA requirement in FY2000, a 14-member external peer review panel (the Garwin Committee) was convened on May 17-19, 2000 to review Sandia National Laboratories' Pulsed Power Programs as a component of the Performance Appraisal Process negotiated with the Department of Energy (DOE). The scope of the review included activities in inertial confinement fission (ICF), weapon physics, development of radiation sources for weapons effects simulation, x-ray radiography, basic research in high energy density physics (HEDP), and pulsed power technology research and development. In his charge to the committee, Jeffrey Quintenz, Director of Pulsed Power Sciences (1600) asked that the review be based on four criteria (1) quality of science, technology, and engineering, (2) programmatic performance, management, and planning, (3) relevance to national needs and agency missions, and (4) performance in the operation and construction of major research facilities. In addition, specific programmatic questions were posed by the director and by the DOE-Defense Programs (DP). The accompanying report, produced as a SAND document, is the report of the committee's findings

  1. Fundamentals studies of a magnetically steered vacuum arc

    Science.gov (United States)

    Walke, Paul

    In recent years demand from production industry for high performance cutting tools, aero and automobile engine parts has prompted research into both existing and novel methods of laying down hard, low friction coatings . A key process for the production of such coatings has been Physical Vapour Deposition (PVD) which has proved to be a consistent and reliable tool for industry. For this technique to continue to be improved and more advanced coatings to be produced, research at the fundamental level is required. This thesis describes research investigating the behaviour of the steered arc cathode spot and methods of improving existing steered arc coating technology.The majority of existing steered arc systems use either permanent magnets or a combination of permanent and electromagnets to steer the arc. Described here is a novel system which employs a pair of electromagnetic coils of cylindrical geometry which enable the arc to be positioned on a circular orbit through a range of continuously variable radii. In addition to this the coils are capable of controlling the transverse and normal magnetic field profiles independently of the steering radius selected. This enables the behaviour of the arc spot to be investigated under a range of magnetic field conditions thus allowing the comparison of measured arc behaviour with a new model of arc motion. Care has described the motion of the arc spot as a biased random walk and has derived an analytical solution to describe the time dependent, probability density function for the arc position in two dimensions. Two distributions are proposed (one in each dimension); the first describes the probability density for the arc position in the direction of driven motion, the second the probability density in the direction of arc confinement. The shape of these distributions is dependent upon the transverse and normal components of the applied magnetic field.A series of experiments are described here that measure the shape of these

  2. Electronic differential control of 2WD electric vehicle considering steering stability

    Science.gov (United States)

    Hua, Yiding; Jiang, Haobin; Geng, Guoqing

    2017-03-01

    Aiming at the steering wheel differential steering control technology of rear wheel independent driving electric wheel, considering the assisting effect of electronic differential control on vehicle steering, based on the high speed steering characteristic of electric wheel car, the electronic differential speed of auxiliary wheel steering is also studied. A yaw moment control strategy is applied to the vehicle at high speed. Based on the vehicle stability reference value, yaw rate is used to design the fuzzy controller to distribute the driving wheel torque. The simulation results show that the basic electronic differential speed function is realized based on the yaw moment control strategy, while the vehicle stability control is improved and the driving safety is enhanced. On the other hand, the torque control strategy can also assist steering of vehicle.

  3. Research on Sliding Mode Control for Steer-by-Wire System in Forklift

    Directory of Open Access Journals (Sweden)

    Huang Jun-Jie

    2017-01-01

    Full Text Available Aiming at steering stability and wheel angle tracking of steer-by-wire (SBW three wheeled forklift, steering dynamic model and SBW system mathematical model of three wheeled forklift are established. A control strategy for the ideal transmission ratio is introduced based on this model, which ensures forklift steering gain invariant. A sliding mode controller can then be designed based on the bound information of uncertain system parameters, uncertain self-aligning torque, and external disturbances. The results of simulation show the control strategies above can effectively reduce the sideslip angle when the forklift is steering and improve the sensitivity and stability of the steering forklift; at the same time can effectively restrain the parameter perturbation of internal system and external disturbance, which improves the tracking performance of the wheel angle.

  4. 77 FR 71169 - Smart Grid Advisory Committee Meeting

    Science.gov (United States)

    2012-11-29

    ... cybersecurity coordination and the NIST Smart Grid Program Plan. The agenda may change to accommodate Committee business. The final agenda will be posted on the Smart Grid Web site at http://www.nist.gov/smartgrid... receive presentations on cybersecurity coordination and the NIST Smart Grid Program Plan. The agenda may...

  5. Packaging consideration of two-dimensional polymer-based photonic crystals for laser beam steering

    Science.gov (United States)

    Dou, Xinyuan; Chen, Xiaonan; Chen, Maggie Yihong; Wang, Alan Xiaolong; Jiang, Wei; Chen, Ray T.

    2009-02-01

    In this paper, we report the theoretical study of polymer-based photonic crystals for laser beam steering which is based on the superprism effect as well as the experiment fabrication of the two dimensional photonic crystals for the laser beam steering. Superprism effect, the principle for beam steering, was separately studied in details through EFC (Equifrequency Contour) analysis. Polymer based photonic crystals were fabricated through double exposure holographic interference method using SU8-2007. The experiment results were also reported.

  6. Operational experience with model-based steering in the SLC linac

    International Nuclear Information System (INIS)

    Thompson, K.A.; Himel, T.; Moore, S.; Sanchez-Chopitea, L.; Shoaee, H.

    1989-03-01

    Operational experience with model-driven steering in the linac of the Stanford Linear Collider is discussed. Important issues include two-beam steering, sensitivity of algorithms to faulty components, sources of disagreement with the model, and the effects of the finite resolution of beam position monitors. Methods developed to make the steering algorithms more robust in the presence of such complications are also presented. 5 refs., 1 fig

  7. Poverty and Hunger in Hispanic America: The Inadequacy of Data for Policy Planning. Hearing before the Select Committee on Hunger. United States House of Representatives, One Hundredth Congress, Second Session (March 30, 1988).

    Science.gov (United States)

    Congress of the U.S., Washington, DC. House Select Committee on Hunger.

    This hearing addresses issues of health, hunger, and malnutrition among Hispanic Americans. Health and poverty agency officials made statements before the committee and expressed difficulty in examining the health- and poverty-related problems among Hispanics because of a lack of data. Testimony indicated that previous data regarding the health of…

  8. 47 CFR 90.531 - Band plan.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Band plan. 90.531 Section 90.531...-805 MHz Bands § 90.531 Band plan. This section sets forth the band plan for the 763-775 MHz and 793... and portables subject to Commission-approved regional planning committee regional plans. Transmitter...

  9. EVALUATION OF A CONCEPTUAL VEHICLE STEERING SYSTEM FOR INDEPENDENT WHEEL CONTROL

    Directory of Open Access Journals (Sweden)

    Ryszard BUCHALIK

    2017-03-01

    Full Text Available This paper presents a brief description of an unconventional steering system involving electronic stability control and its influence on vehicle motion. The proposed configuration enables individual changes in steering angle for each single wheel, in contrast to the mechanical linkage solution. An analysis of vehicle behaviour during emergency braking on a heterogeneous surface is conducted, especially with regard to the undesirable rotation of the vehicle body. The benefits of using this active steering system, implemented in the steer-by-wire mode, are characterized, while the problems for further consideration and the potential benefits of such a solution are described.

  10. Demonstration of Multisetting One-Way Einstein-Podolsky-Rosen Steering in Two-Qubit Systems

    Science.gov (United States)

    Xiao, Ya; Ye, Xiang-Jun; Sun, Kai; Xu, Jin-Shi; Li, Chuan-Feng; Guo, Guang-Can

    2017-04-01

    Einstein-Podolsky-Rosen (EPR) steering describes the ability of one party to remotely affect another's state through local measurements. One of the most distinguishable properties of EPR steering is its asymmetric aspect. Steering can work in one direction but fail in the opposite direction. This type of one-way steering, which is different from the symmetry concepts of entanglement and Bell nonlocality, has garnered much interest. However, an experimental demonstration of genuine one-way EPR steering in the simplest scenario, i.e., one that employs two-qubit systems, is still lacking. In this Letter, we experimentally demonstrate one-way EPR steering with multimeasurement settings for a class of two-qubit states, which are still one-way steerable even with infinite settings. The steerability is quantified by the steering radius, which represents a necessary and sufficient steering criterion. The demonstrated one-way steering in the simplest bipartite quantum system is of fundamental interest and may provide potential applications in one-way quantum information tasks.

  11. Integrated Design and Analysis Tools for Reduced Weight, Affordable Fiber Steered Composites

    National Research Council Canada - National Science Library

    Hale, Richard

    2004-01-01

    This report describes geometric design tools which encompass the overall process flow for fiber placed and fiber steered structures, to allow parallel considerations for manufacturability and mechanical performance...

  12. Ultra-compact laser beam steering device using holographically formed two dimensional photonic crystal.

    Science.gov (United States)

    Dou, Xinyuan; Chen, Xiaonan; Chen, Maggie Yihong; Wang, Alan Xiaolong; Jiang, Wei; Chen, Ray T

    2010-03-01

    In this paper, we report the theoretical study of polymer-based photonic crystals for laser beam steering which is based on the superprism effect as well as the experiment fabrication of the two dimensional photonic crystals for the laser beam steering. Superprism effect, the principle for beam steering, was separately studied in details through EFC (Equifrequency Contour) analysis. Polymer based photonic crystals were fabricated through double exposure holographic interference method using SU8-2007. The experiment results showed a beam steering angle of 10 degree for 30 nm wavelength variation.

  13. Refractive waveguide non-mechanical beam steering (NMBS) in the MWIR

    Science.gov (United States)

    Myers, Jason D.; Frantz, Jesse A.; Spillmann, Christopher M.; Bekele, Robel Y.; Kolacz, Jakub; Gotjen, Henry; Naciri, Jawad; Shaw, Brandon; Sanghera, Jas S.

    2018-02-01

    Beam steering is a crucial technology for a number of applications, including chemical sensing/mapping and light detection and ranging (LIDAR). Traditional beam steering approaches rely on mechanical movement, such as the realignment of mirrors in gimbal mounts. The mechanical approach to steering has several drawbacks, including large size, weight and power usage (SWAP), and frequent mechanical failures. Recently, alternative non-mechanical approaches have been proposed and developed, but these technologies do not meet the demanding requirements for many beam steering applications. Here, we highlight the development efforts into a particular non-mechanical beam steering (NMBS) approach, refractive waveguides, for application in the MWIR. These waveguides are based on an Ulrich-coupled slab waveguide with a liquid crystal (LC) top cladding; by selectively applying an electric field across the liquid crystal through a prismatic electrode, steering is achieved by creating refraction at prismatic interfaces as light propagates through the device. For applications in the MWIR, we describe a versatile waveguide architecture based on chalcogenide glasses that have a wide range of refractive indices, transmission windows, and dispersion properties. We have further developed robust shadow-masking methods to taper the subcladding layers in the coupling region. We have demonstrated devices with >10° of steering in the MWIR and a number of advantageous properties for beam steering applications, including low-power operation, compact size, and fast point-to-point steering.

  14. Optimization of energy planning strategies in municipalities

    DEFF Research Database (Denmark)

    Petersen, Jens-Phillip

    approach, suffers from insufficient information, tools and resources. Municipalities are often unable to take on a steering role in community energy planning. To overcome these barriers and guide municipalities in the pre-project phase, a decision-support methodology, based on community energy profiles...

  15. Second meeting of the ITER Preparatory Committee

    International Nuclear Information System (INIS)

    Drew, M.

    2003-01-01

    The committee charged to oversee the ITER ITA (ITER transitional arrangements) the ITER preparatory committee, held its second meeting on 24 September at the JET facilities at Culham, UK. Dr. Umberto Finzi of the European Commission was chairman. This meeting was also the first since the succession by Dr. Yasuo Shimomura to Dr. Robert Aymar as Interim Project Leader (IPL). Welcoming Dr. Shimomura in his new capacity, the Committee paid tribute to the outstanding contributions of his predecessor to the definition, design and promotion of ITER, and expressed the gratitude of all Participants to Dr. Aymar and its best wishes for future success in his new appointment.The technical activities of the ITA were the main focus of the Committee's discussions. The Committee took note of the IPL's Status Report on ITA Technical Activities and endorsed the IPL's proposals for the top level structure of the International Team, including the designation of Dr. Pietro Barabaschi as Deputy to the IPL. The Committee took note of the IPL's proposals on Participants' contributions to the ITA and of the Participants' stated intentions and expectations in this regard. Several Delegations pointed out that access to necessary resources would depend strongly on progress made towards the Agreement. All Participants were invited, in the shared interests of the project, to respond constructively to the specific technical areas where the IPL reported a lack of resources. Following a presentation from the IT on Project Management Tools, the Committee expressed support, in general, for the proposed strategy designed to provide the current team with the CAD and Data Management elements necessary to prepare for an efficient start of ITER construction, and asked the IT Leader to report on an estimate and time profile of expenditure during the period to mid-2004. The Committee supported the proposals to re-establish the ITER Test Blanket Working. The Committee agreed that the phasing of planned

  16. : Light Steering Projection Systems and Attributes for HDR Displays

    KAUST Repository

    Damberg, Gerwin

    2017-06-02

    New light steering projectors in cinema form images by moving light away from dark regions into bright areas of an image. In these systems, the peak luminance of small features can far exceed full screen white luminance. In traditional projectors where light is filtered or blocked in order to give shades of gray (or colors), the peak luminance is fixed. The luminance of chromatic features benefit in the same way as white features, and chromatic image details can be reproduced at high brightness leading to a much wider overall color gamut coverage than previously possible. Projectors of this capability are desired by the creative community to aid in and enhance storytelling. Furthermore, reduced light source power requirements of light steering projectors provide additional economic and environmental benefits. While the dependency of peak luminance level on (bright) image feature size is new in the digital cinema space, display technologies with identical characteristics such as OLED, LED LCD and Plasma TVs are well established in the home. Similarly, direct view LED walls are popular in events, advertising and architectural markets. To enable consistent color reproduction across devices in today’s content production pipelines, models that describe modern projectors and display attributes need to evolve together with HDR standards and available metadata. This paper is a first step towards rethinking legacy display descriptors such as contrast, peak luminance and color primaries in light of new display technology. We first summarize recent progress in the field of light steering projectors in cinema and then, based on new projector and existing display characteristics propose the inclusion of two simple display attributes: Maximum Average Luminance and Peak (Color) Primary Luminance. We show that the proposed attributes allow a better prediction of content reproducibility on HDR displays. To validate this assertion, we test professional content on a commercial HDR

  17. Steering the osteoclast through the demineralization-collagenolysis balance

    DEFF Research Database (Denmark)

    Søe, Kent; Merrild, Ditte Marie Horslev; Delaissé, Jean-Marie

    2013-01-01

    are generated when collagen degradation is slower than demineralization, and trenches when collagen degradation is as fast as demineralization. Next we treated the osteoclasts with a low dose of a carbonic anhydrase inhibitor to slightly decrease the rate of demineralization, thereby allowing collagen......, forming a pit, and continues parallel to the bone surface, forming a trench. Importantly, we show that the progress of the osteoclast along this route depends on the balance between the rate of collagenolysis and demineralization. We propose that the osteocytes and bone lining cells surrounding...... the osteoclast may act on this balance to steer the osteoclast resorptive activity in order to give the excavations a specific shape....

  18. Concept of navigation and automatic steering of the measuring dolphin

    Energy Technology Data Exchange (ETDEWEB)

    Majohr, J.; Buch, T.; Korte, C. [Rostock Univ. (Germany). Inst. fuer Automatisierungstechnik

    2000-07-01

    The Catamaran - Measuring Dolphin (MESSIN) is an unmanned and independently operated craft having been designed for carrying out multiple measuring tasks in the field of marine research and water monitoring especially in shallow waters. An introduction to the navigation, steering and safety systems is given. Furthermore the main components of the track control system and the electronic chart system used here are shown. Results of manoeuvring tests of the MESSIN are represented. This paper gives a contribution to the field of research ''autonomous and full automated vehicle''. (orig.)

  19. Creating virtual electrodes with 2D current steering

    Science.gov (United States)

    Spencer, Thomas C.; Fallon, James B.; Shivdasani, Mohit N.

    2018-06-01

    Objective. Current steering techniques have shown promise in retinal prostheses as a way to increase the number of distinct percepts elicitable without increasing the number of implanted electrodes. Previously, it has been shown that ‘virtual’ electrodes can be created between simultaneously stimulated electrode pairs, producing unique cortical response patterns. This study investigated whether virtual electrodes could be created using 2D current steering, and whether these virtual electrodes can produce cortical responses with predictable spatial characteristics. Approach. Normally-sighted eyes of seven adult anaesthetised cats were implanted with a 42-channel electrode array in the suprachoroidal space and multi-unit neural activity was recorded from the visual cortex. Stimuli were delivered to individual physical electrodes, or electrodes grouped into triangular, rectangular, and hexagonal arrangements. Varying proportions of charge were applied to each electrode in a group to ‘steer’ current and create virtual electrodes. The centroids of cortical responses to stimulation of virtual electrodes were compared to those evoked by stimulation of single physical electrodes. Main results. Responses to stimulation of groups of up to six electrodes with equal ratios of charge on each electrode resulted in cortical activation patterns that were similar to those elicited by the central physical electrode (centroids: RM ANOVA on ranks, p  >  0.05 neural spread: one-way ANOVA on Ranks, p  >  0.05). We were also able to steer the centroid of activation towards the direction of any of the electrodes of the group by applying a greater charge to that electrode, but the movement in the centroid was not found to be significant. Significance. The results suggest that current steering is possible in two dimensions between up to at least six electrodes, indicating it may be possible to increase the number of percepts in patients without increasing the number

  20. Adaptive feedback linearization applied to steering of ships

    Directory of Open Access Journals (Sweden)

    Thor I. Fossen

    1993-10-01

    Full Text Available This paper describes the application of feedback linearization to automatic steering of ships. The flexibility of the design procedure allows the autopilot to be optimized for both course-keeping and course-changing manoeuvres. Direct adaptive versions of both the course-keeping and turning controller are derived. The advantages of the adaptive controllers are improved performance and reduced fuel consumption. The application of nonlinear control theory also allows the designer in a systematic manner to compensate for nonlinearities in the control design.

  1. Geometric steering criterion for two-qubit states

    Science.gov (United States)

    Yu, Bai-Chu; Jia, Zhih-Ahn; Wu, Yu-Chun; Guo, Guang-Can

    2018-01-01

    According to the geometric characterization of measurement assemblages and local hidden state (LHS) models, we propose a steering criterion which is both necessary and sufficient for two-qubit states under arbitrary measurement sets. A quantity is introduced to describe the required local resources to reconstruct a measurement assemblage for two-qubit states. We show that the quantity can be regarded as a quantification of steerability and be used to find out optimal LHS models. Finally we propose a method to generate unsteerable states, and construct some two-qubit states which are entangled but unsteerable under all projective measurements.

  2. Electrical Steering of Vehicles - Fault-tolerant Analysis and Design

    DEFF Research Database (Denmark)

    Blanke, Mogens; Thomsen, Jesper Sandberg

    2006-01-01

    solutions and still meet strict requirements to functional safety. The paper applies graph-based analysis of functional system structure to find a novel fault-tolerant architecture for an electrical steering where a dedicated AC-motor design and cheap voltage measurements ensure ability to detect all......The topic of this paper is systems that need be designed such that no single fault can cause failure at the overall level. A methodology is presented for analysis and design of fault-tolerant architectures, where diagnosis and autonomous reconfiguration can replace high cost triple redundancy...

  3. 76 FR 2369 - Notice of Staff Attendance at Southwest Power Pool Markets and Operation Policy Committee and...

    Science.gov (United States)

    2011-01-13

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Notice of Staff Attendance at Southwest Power Pool Markets and Operation Policy Committee and Strategic Planning Committee Meetings January 5... the meetings of the Southwest Power Pool, Inc. (SPP) Markets and Operations Policy Committee (MOPC...

  4. 75 FR 27614 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2010-05-17

    ... Environment Protection Committee. --Consideration of the report of the Maritime Safety Committee... Session of the International Maritime Organization (IMO) Council to be held at the IMO headquarters in... HNS Convention. --World Maritime University: --IMO International Maritime Law Institute: --Protection...

  5. 77 FR 76164 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-12-26

    ... atmospheric pollution --Development of international measures for minimizing the transfer of invasive aquatic... pollution hazards of chemicals and preparation of consequential amendments --Additional guidelines for... DEPARTMENT OF STATE [Public Notice 8133] Shipping Coordinating Committee; Notice of Committee...

  6. Growth, carcass characteristics, and profitability of organic versus conventional dairy beef steers.

    Science.gov (United States)

    Bjorklund, E A; Heins, B J; Dicostanzo, A; Chester-Jones, H

    2014-03-01

    Bull calves (n=49), born at the University of Minnesota West Central Research and Outreach Center (Morris) between March and May 2011, were used to compare growth measurements and profitability of conventional and organic dairy steers. Calves were assigned to 1 of 3 replicated groups at birth: conventional (CONV; n=16), organic (pasture and concentrate; ORG; n=16), or organic grass only (GRS; n=17), and analysis of variables was on a pen basis. Breed groups of calves were Holstein (HO; n=9); Holsteins (n=11) maintained at 1964 breed average level; crossbreds (n=19) including combinations of HO, Montbéliarde, and Swedish Red; and crossbreds (n=10) including combinations of HO, Jersey, Swedish Red, and Normande. The CONV steers were fed a diet of 80% concentrate and 20% forage. The ORG steers were fed a diet of organic corn, organic corn silage, and at least 30% of their diet consisted of organic pasture during the grazing season. The GRS steers grazed pasture during the grazing season and were fed high-quality hay or hay silage during the nongrazing season. Intakes of a total mixed ration were recorded daily with herd management software. A profit function was defined to include revenues and expenses for beef value, feed intake, pasture intake, health cost, and yardage. The GRS (358.6 kg) steers had lesser total gains from birth to slaughter than ORG (429.6 kg) and CONV (534.5 kg) steers. Furthermore, the GRS (0.61 kg/d) steers had lesser average daily gain from birth compared with ORG (0.81 kg/d) and CONV (1.1 kg/d) steers. The GRS and ORG steers had smaller rib eye area (49.5 and 65.8 cm(2), respectively) compared with CONV (75.4 cm(2)) steers. For profitability, GRS steers had 43% greater profit than CONV steers due to organic beef price premiums and lower feed costs. On the other hand, ORG steers had substantially less profit than CONV steers. The higher cost of production for the ORG steers is due to the extreme high value of organic corn. The results of the

  7. Status and plans for U.S. ITER studies

    International Nuclear Information System (INIS)

    Doggett, J.N.

    1992-01-01

    The United States' participation in the International Thermonuclear Experimental Reactor (ITER) began in late 1987 when the initiative to start a cooperative program among the four Parties-the Soviet Union, Japan, the European Community, and the United States-was initiated. Participation then continued through the start of joint Work in May 1988 until the conclusion of the Conceptual Design Activities (CDA) in December 1990. In the period between the conclusion of the CDA and the agreement to execute the Engineering Design Activities (EDA), the U.S. ITER Home Team continued to do work on the design, executed additional research and development (R and D) and participated in the preparations for the EDA. Activities included one major design study on a High-Aspect-Ratio Design (HARD) and input to the National ITER Technical Review, the ITER Steering Committee-U.S. (ISCUS), Special Working Group 1 (SWG-1), and the Fusion Energy Advisory Committee's Panel 1 (FEAC-1). Research and development was continued in areas of work that were identified as critical-path elements by an international panel chartered by the four ITER Parties near the end of the CDA. During the interim period, the U.S. Home Team Management (HTM) was in the process of organizing to support the EDA both at home and in the central design sites. The major efforts have been in producing a management plan, establishing memorandums of agreement with the performing institutions for ITER tasks, establishing an industrial council, and producing a list of candidates who are qualified, willing, and available to serve on the joint Central Team or to participate in ITER home tasks. The author describes the conclusion of the CDA and the interim U.S. ITER activities and will give an indication of US involvement in the EDA

  8. Adiabatic photo-steering theory in topological insulators

    International Nuclear Information System (INIS)

    Inoue, Jun-ichi

    2014-01-01

    Feasible external control of material properties is a crucial issue in condensed matter physics. A new approach to achieving this aim, named adiabatic photo-steering, is reviewed. The core principle of this scheme is that several material constants are effectively turned into externally tunable variables by irradiation of monochromatic laser light. Two-dimensional topological insulators are selected as the optimal systems that exhibit a prominent change in their properties following the application of this method. Two specific examples of photo-steered quantum phenomena, which reflect topological aspects of the electronic systems at hand, are presented. One is the integer quantum Hall effect described by the Haldane model, and the other is the quantum spin Hall effect described by the Kane–Mele model. The topological quantities associated with these phenomena are the conventional Chern number and spin Chern number, respectively. A recent interesting idea, time-reversal symmetry breaking via a temporary periodic external stimulation, is also discussed. (focus issue review)

  9. Mid-sized omnidirectional robot with hydraulic drive and steering

    Science.gov (United States)

    Wood, Carl G.; Perry, Trent; Cook, Douglas; Maxfield, Russell; Davidson, Morgan E.

    2003-09-01

    Through funding from the US Army-Tank-Automotive and Armaments Command's (TACOM) Intelligent Mobility Program, Utah State University's (USU) Center for Self-Organizing and Intelligent Systems (CSOIS) has developed the T-series of omni-directional robots based on the USU omni-directional vehicle (ODV) technology. The ODV provides independent computer control of steering and drive in a single wheel assembly. By putting multiple omni-directional (OD) wheels on a chassis, a vehicle is capable of uncoupled translational and rotational motion. Previous robots in the series, the T1, T2, T3, ODIS, ODIS-T, and ODIS-S have all used OD wheels based on electric motors. The T4 weighs approximately 1400 lbs and features a 4-wheel drive wheel configuration. Each wheel assembly consists of a hydraulic drive motor and a hydraulic steering motor. A gasoline engine is used to power both the hydraulic and electrical systems. The paper presents an overview of the mechanical design of the vehicle as well as potential uses of this technology in fielded systems.

  10. Steering elastic SH waves in an anomalous way by metasurface

    Science.gov (United States)

    Cao, Liyun; Yang, Zhichun; Xu, Yanlong

    2018-03-01

    Metasurface, which does not exist in nature, has exhibited exotic essence on the manipulation of both electromagnetic and acoustic waves. In this paper, the concept of metasurface is extended to the field of elastic SH waves, and the anomalous refractions of SH waves across the designed elastic SH wave metasurfaces (SHWMs) are demonstrated numerically. Firstly, a SHWM is designed with supercells, each supercell is composed of four subunits. It is demonstrated that this configuration has the ability of deflecting the vertical and oblique incident waves in an arbitrary desired direction. Then, a unique SHWM with supercell composed of only two subunits is designed. Numerical simulation shows its ability of splitting the vertical and oblique incident waves into two tunable transmitted wave beams, respectively. In the process of steering SH waves, it is also found that two kinds of leakages of transmitted waves across the designed SHWM will occur in some particular situations, which will affect the desired transmitted wave. The mechanisms of the leakages, which are different from that of the common high-order diffraction mentioned in existing literatures, are revealed. The current study can offer theoretical guidance not only for designing devices of directional ultrasonic detection and splitting SH waves but also for steering other kinds of classical waves.

  11. Reducing supplementation frequency for Nellore beef steers grazing tropical pastures

    Directory of Open Access Journals (Sweden)

    Roberta Carrilho Canesin

    2014-04-01

    Full Text Available Reduced supplementation frequency is a broadly applied management practice. Ruminants consuming low quality forages/pastures, supplemented less than once daily are able to maintain body weight gain (BWG, efficiency of use of dry matter, nitrogen and other nutrients, as compared with animals supplemented once daily. We evaluated the feeding behavior, dry matter intake (DMI, dry matter and organic matter digestibility (DMD and OMD, BWG, Longissimus muscle area and backfat depth of Nellore steers raised on Brachiaria brizantha cv. Marandu pastures during the dry season, with different supplementation patterns. Thirty six animals (338 ± 40.7 kg were distributed over nine paddocks according to a completely randomized design. Treatments were based on supplementation frequency: once daily (OD, once daily except Saturdays and Sundays (SS, or on alternate days (AD, at 1.0 %, 1.4 % and 2.0 % BW, respectively. Average total DMI accounted for 1.6 % BW day-1, with no effect of supplementation frequency. Supplementation frequency had no effect on BWG or grazing time during the day. There was no difference in Longissimus muscle area animals supplemented daily, SS and AD. The backfat depth was thinner in animals supplemented AD, but even in this case, it was within the standards considered satisfactory for a finishing steer. Reducing supplementation frequency seems a good option to lower labor costs without affecting feed efficiency or carcass quality in beef cattle grazing tropical pastures.

  12. Advanced Optics for the Remote Steering ITER ECRH Upper Launcher

    International Nuclear Information System (INIS)

    Bruschi, A; Cirant, S; Moro, A; Platania, P; Sozzi, C

    2005-01-01

    The optics of the ECRH Upper Launcher in ITER based on the Remote Steering concept needs special attention, since any focussing element in front of the waveguide has combined effects on the range of steering angles achievable and the beam width in the plasma region. The effects are studied in detail for a setup composed by 8 beams per port (three ports), for a spherical and a hyperbolic mirror surface. Gaussian beam analysis is compared to beam pattern calculations with the optical physics code GRASP, in order to verify the validity of gaussian optics approximation. The standard description with simply astigmatic beams, not adequate in more complex systems as the proposed two-mirror set-up, requires approximations, which are compared with the generalized astigmatic beam description. The ohmic losses at the end mirrors and the related localized heating due to the very large power density cause deformations that depends on the design of the cooling circuit. The distortion of the beam shape has been evaluated in a realistic case of mirror cooling with a small-channel system. The quantification of the effect depends on the precise evaluation ohmic losses and their enhancement in the long term due to the surface deterioration

  13. Stability Simulation of a Vehicle with Wheel Active Steering

    Directory of Open Access Journals (Sweden)

    Brabec Pavel

    2016-01-01

    Full Text Available This paper deals with the possibility of increasing the vehicle driving stability at a higher speed. One of the ways how to achieve higher stability is using the 4WS system. Mathematical description of vehicle general movement is a very complex task. For simulation, models which are aptly simplified are used. For the first approach, so-called single-truck vehicle model (often linear is usually used. For the simulation, we have chosen to extend the model into a two-truck one, which includes the possibility to input more vehicle parameters. Considering the 4WS system, it is possible to use a number of potential regulations. In our simulation model, the regulation system with compound coupling was used. This type of regulation turns the rear wheels depending on the input parameters of the system (steering angle of the front wheels and depending on the output moving quantities of the vehicle, most frequently the yaw rate. Criterion for compensation of lateral deflection centre of gravity angle is its zero value, or more precisely the zero value of its first-order derivative. Parameters and set-up of the simulation model were done in conjunction with the dSAPACE software. Reference performances of the vehicle simulation model were made through the defined manoeuvres. But the simulation results indicate that the rear-wheels steering can have a positive effect on the vehicle movement stability, especially when changing the driving direction at high speed.

  14. 78 FR 32698 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2013-05-31

    ... DEPARTMENT OF STATE [Public Notice 8340] Shipping Coordinating Committee; Notice of Committee... Technical Co-operation Committee --Protection of vital shipping lanes --Periodic review of administrative... of the Organization since the twenty-eighth regular session of the Assembly --External relations...

  15. 75 FR 43156 - Federal Advisory Committee; Missile Defense Advisory Committee

    Science.gov (United States)

    2010-07-23

    ... DEPARTMENT OF DEFENSE Office of the Secretary Federal Advisory Committee; Missile Defense Advisory Committee AGENCY: Missile Defense Agency (MDA), DoD. ACTION: Notice of closed meeting. SUMMARY: Under the... Defense announces that the Missile Defense Advisory Committee will meet on August 4 and 5, 2010, in...

  16. Form planning Control to growth management

    DEFF Research Database (Denmark)

    Enemark, Stig

    2016-01-01

    its so-called “comprehensive-integrated” tradition and both the steering and strategic roles of national-level planning have been largely superseded by a more “flexible” planning style fit to promote specific sectoral agendas. While the legacy of land-use planning is still embedded at the local level...... caused that spatial planning be regarded more as a cost than an asset. Accordingly, it is evident that the Danish planning domain has progressively lost political clout and the focus is changed towards facilitation and management of economic growth....

  17. Brazilian emergency planning for radiological accidents

    International Nuclear Information System (INIS)

    Mendonca, A.H.

    1986-01-01

    Brazilian emergency planning for radiological accidents is organized to respond promptly to any emergency at nuclear power plants or other installations utilizing nuclear fuel. It consists of several committees: a general coordination committee with representatives from several federal departments, with final decision with the Brazilian Nuclear Energy Commission (CNEN), and the Federal Environmental Protection Agency (SEMA). Some committees conduct support activities. For example, the Operational Coordination Committee supervises the tasks undertaken by the Army, Navy, and Air Force in response to the needs and decisions of the general coordination committee

  18. Beam steering for circular switched parasitic arrays using a combinational approach

    CSIR Research Space (South Africa)

    Mofolo, ROM

    2011-09-01

    Full Text Available In this paper, the authors present a method of electronic beam steering for circular switched parasitic array (SPA) antennas. In circular SPA antennas, one achieves azimuth beam steering by open-circuiting and short-circuiting different parasitic...

  19. How to Steer and Lead Educational Processes in a Digital Medium Environment?

    DEFF Research Database (Denmark)

    Tække, Jesper

    This paper is about challenges to steering and leadership of educational interaction in classrooms provided by the new medium environment that comes with digital media. In the new medium environment, the old way of steering what is going on in the classroom appears not to work any more since...

  20. Alteration in gene expression in the jejunum mucosa of Angus steers with divergent ADG

    Science.gov (United States)

    The objective of this study was to determine the association of differentially expressed genes in the jejunum of steers with average DMI and high or low ADG. Feed intake and growth were measured in a cohort of 144 commercial Angus steers consuming a finishing ration containing (on a DM basis) 67.8% ...

  1. Progress on the ITER H&CD EC upper launcher steering-mirror control system

    NARCIS (Netherlands)

    Collazos, A.; Bertizzolo, R.; Chavan, R.; Dolizy, F.; Felici, F.; Goodman, T.P.; Henderson, M.A.; Landis, J.-D.; Sanchez, F.

    2010-01-01

    The ITER Heating and Current Drive Upper Launcher (H&CD EC UL) uses a pneumomechanical steering-mirror assembly (SMA) to steer the RF beams for their deposition in the appropriate location in the plasma to control magnetohydrodynamic activity (neoclassical tearing modes (NTMs) and sawtooth

  2. Exogenous administration of lipids to steers alters aspects of the innate immune response to endotoxin challenge

    Science.gov (United States)

    Limitations in energy availability are known to impede the efficiency of the immune response to endotoxemia. Therefore, this study examined the effects of increasing energy availability on the pro-inflammatory response to LPS in Holstein steers. Steers were randomly assigned to 1 of 3 groups (n = 7 ...

  3. A theoretical model of speed-dependent steering torque for rolling tyres

    Science.gov (United States)

    Wei, Yintao; Oertel, Christian; Liu, Yahui; Li, Xuebing

    2016-04-01

    It is well known that the tyre steering torque is highly dependent on the tyre rolling speed. In limited cases, i.e. parking manoeuvre, the steering torque approaches the maximum. With the increasing tyre speed, the steering torque decreased rapidly. Accurate modelling of the speed-dependent behaviour for the tyre steering torque is a key factor to calibrate the electric power steering (EPS) system and tune the handling performance of vehicles. However, no satisfactory theoretical model can be found in the existing literature to explain this phenomenon. This paper proposes a new theoretical framework to model this important tyre behaviour, which includes three key factors: (1) tyre three-dimensional transient rolling kinematics with turn-slip; (2) dynamical force and moment generation; and (3) the mixed Lagrange-Euler method for contact deformation solving. A nonlinear finite-element code has been developed to implement the proposed approach. It can be found that the main mechanism for the speed-dependent steering torque is due to turn-slip-related kinematics. This paper provides a theory to explain the complex mechanism of the tyre steering torque generation, which helps to understand the speed-dependent tyre steering torque, tyre road feeling and EPS calibration.

  4. Modulation of the acute phase response in feedlot steers supplemented with Saccharomyces cerevisiae

    Science.gov (United States)

    This study was designed to determine the effect of supplementing feedlot steers with Saccharomyces cerevisiae CNCM I-1079 (SC) on the acute phase response to a lipopolysaccharide (LPS) challenge. Steers (n = 18; 266 ± 4 kilograms body weight) were separated into three treatment groups (n = 6/treatm...

  5. Application of washed rumen technique for rapid determination of fasting heat production in steers

    Science.gov (United States)

    Two experiments were conducted to evaluate the use of a washed rumen technique as an alternative approach for determining fasting HP in cattle. In Exp. 1, 8 Holstein steers (322±30 kg) were adapted to a cubed alfalfa-based diet (1.5xNEm) for 10 d. After which steers were placed into individual hea...

  6. Effects of steering demand on lane keeping behaviour, self-reports, and physiology : A simulator study

    NARCIS (Netherlands)

    Dijksterhuis, Chris; Brookhuis, Karel A.; De Waard, Dick

    In this study a driving simulator was used to determine changes in mental effort in response to manipulations of steering demand. Changes in mental effort were assessed by using subjective effort ratings, physiology, and the standard deviation of the lateral position. Steering demand was increased

  7. Beam steered millimeter-wave fiber-wireless system for 5G indoor coverage

    NARCIS (Netherlands)

    Cao, Z.; Wang, Q.; Tessema, N.M.; Leijtens, X.J.M.; Soares, F.M.; Koonen, A.M.J.

    2016-01-01

    A 38GHz beam steered fiber-wireless system, enabled by a novel integrated optical tunable delay line, is demonstrated for 5G indoor coverage. The beam steering gains 14dBm spatial power focusing and 6 times EVM improvement.

  8. 46 CFR 185.320 - Steering gear, controls, and communication system tests.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Steering gear, controls, and communication system tests. 185.320 Section 185.320 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) OPERATIONS Miscellaneous Operating Requirements § 185.320 Steering...

  9. 46 CFR 122.320 - Steering gear, controls, and communication system tests.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Steering gear, controls, and communication system tests... communication system tests. The master of a vessel shall have examined and tested the steering gear, signaling whistle, propulsion controls, and communication systems of the vessel prior to getting underway for a...

  10. Reducing Digging Losses by Using Automated Steering to Plant and Invert Peanuts

    Directory of Open Access Journals (Sweden)

    George Vellidis

    2014-07-01

    Full Text Available GPS guidance of farm machinery has been increasingly adopted by farmers because of the perceived gains in efficiency that it provides. In the southeastern USA one of the reasons farmers adopt GPS guidance, and specifically automated steering (auto-steer, is that it can theoretically result in large yield gains when used to plant and invert peanuts—one of the region’s most important crops. The goal of our study was to quantify the yield benefit of using real time kinematic (RTK-based auto-steer to plant and invert peanuts under a variety of terrain conditions. Yield benefits result from reduced digging losses. The study was conducted for two consecutive years (2010 and 2011 on a private farm in Georgia, USA. When all data are grouped together, auto-steer outperformed conventional by 579 kg/ha in 2010 and 451 kg/ha in 2011. We also evaluated the performance of auto-steer under different curvature conditions using low, medium, and high curvature rows. The results showed that auto-steer outperformed conventional under all curvature by a minimum of 338 kg/ha. Finally, we evaluated passive implement guidance in combination with auto-steer and found that it holds tremendous potential for further reducing digging losses. In many cases, auto-steer will pay for itself within a year.

  11. On Using Current Steering Logic in Mixed Analogue-digital Circuits

    DEFF Research Database (Denmark)

    Lehmann, Torsten

    1998-01-01

    The authors investigate power supply noise in mixed analogue-digital circuits, arising from communication between the analogue and digital parts of the circuit. Current steering techniques and proper buffering are used to show which noise currents can be reduced and which cannot. In addition......, a high-swing current steering buffer for driving analogue switches or external digital signals is proposed....

  12. Does pedalling on a recumbent bicycle influence the cyclist’s steering behaviour?

    NARCIS (Netherlands)

    Boon, K.M.; Klap, P.; Van Lanen, J.A.; Letsoin, G.J.; Jansen, A.J.

    2014-01-01

    The paper presents the answer to the question how pedalling on a specific recumbent bicycle, such as the VeloX3, influences a cyclist’s ability to steer the bicycle. The research aims to find the correlation between pedalling and the undesired steering movements it creates. To test this assumption a

  13. Modelling and Simulation of a Hydrostatic Steering System for Agricultural Tractors

    Directory of Open Access Journals (Sweden)

    Barbara Zardin

    2018-01-01

    Full Text Available The steering system of a vehicle impacts on the vehicle performance, safety and on the driver’s comfort. Moreover, in off-road vehicles using hydrostatic steering systems, the energy dissipation also becomes a critical issue. These aspects push and motivate innovation, research and analysis in the field of agricultural tractors. This paper proposes the modelling and analysis of a hydrostatic steering system for an agricultural tractor to calculate the performance of the system and determine the influence of its main design parameters. The focus here is on the driver’s steering feel, which can improve the driver’s behavior reducing unnecessary steering corrections during the working conditions. The hydrostatic steering system is quite complex and involves a hydraulic circuit and a mechanical mechanism to transmit the steering to the vehicle tires. The detailed lumped parameters model here proposed allows to simulate the dynamic behavior of the steering system and to both enhance the understanding of the system and to improve the design through parameters sensitivity analysis.

  14. comparative beef production from buli,s, steers and heifers under

    African Journals Online (AJOL)

    steers, although statistically significant, were much srnaller than differences obtained in the present study. Out of a maximum possible grading of 20 points, bulls obtained an average of 12,3 points (Grade I -) which is considerably lower than the grading points obtained by steers (16,3 = Prime) or by heifers (17,5 = Prime+).

  15. Using carbon emissions, oxygen consumption, and retained energy to calculate dietary ME intake by beef steers

    Science.gov (United States)

    Eight cross-bred beef steers (initial BW = 241 ± 4.10 kg) were used in a 77-d feeding experiment to determine if ME intake can be determined from carbon emissions, oxygen consumption, and energy retention estimates. Steers were housed in a pen equipped with individual feed bunks and animal access w...

  16. The medical school curriculum committee revisited.

    Science.gov (United States)

    Hendricson, W D; Payer, A F; Rogers, L P; Markus, J F

    1993-03-01

    Numerous study commissions have contended that departmental territoriality and lack of coordinated planning are stagnating contemporary medical education. As a cure, these commissions have recommended the creation of centralized academic management units empowered to oversee revitalization of the curriculum through a series of reforms, including better definition of graduation competencies, community-based training, interdisciplinary courses, problem-based learning, and modernization of evaluation strategies. To determine the extent to which these recommendations were being adopted, in 1990 the authors sent a questionnaire on curriculum committee functions, current innovation efforts, and future priorities to academic administrators and members of medical school curriculum committees at 143 North American medical schools. Responses were received from administrators (primarily associate deans for academic affairs) at 118 schools and committee members (primarily faculty) at 111 schools. Recommendations for enhancing curriculum committee effectiveness were also elicited. The authors conclude that centralization of curricular management has occurred at very few institutions, and that the commonly mentioned reforms are being adopted at a modest pace. The results are analyzed in light of theories of the institutional change process and strategies for introducing educational innovations into established institutions.

  17. Expert Committee on College Libraries

    OpenAIRE

    Joy, V. P.; Raman Nair, R.; Ayub, M.

    1994-01-01

    Importance of library and information services in higher education was emphasized in India by many committees of Government of India from 1917 including Calcutta University Commission under Sir Michael Saddler, University Education Commission (1949) chaired by Dr. S. Radhakrishnan, Ranganathan Committee (1958), Education Commission (1966) chaired by D.S. Kothari, as well as Sen Committee, Mehrotra Committee etc of UGC. But as education being a State subject; union government could not go beyo...

  18. SENIOR STAFF ADVANCEMENT COMMITTEE (SSAC)

    CERN Document Server

    2000-01-01

    Composition and mandateThe Senior Staff Advancement Committee is composed of members nominated ad persona by the Director-General.The Committee examines proposals from Divisions concerning promotions to grade 13 in Career Path IX, changes of career path to Career Path IX and advancements to the exceptional grade in Career path VIII.The Director-General may consult the Committee on any matter related to senior staff careers.The Committee makes its recommendations to the Director-General.

  19. Plasma Science Committee (PLSC)

    International Nuclear Information System (INIS)

    1990-01-01

    The Plasma Science Committee (PLSC) is a standing committee under the auspices of the Board on Physics and Astronomy, Commission on Physical Sciences, Mathematics, and Applications of the National Academy of Sciences--National Research Council. Plasma sciences represent a broad and diverse field. The PLSC has accepted the responsibility of monitoring the continuing development and assessing the general health of the field as whole. Although select advisory bodies have been created to address specific issues that affect plasma science, such as the Fusion Policy Advisory Committee (FPAC), the PLSC provides a focus for the plasma science community that is unique and essential. The membership of the PLSC is drawn from research laboratories in universities, industry, and government. Areas of expertise on the committee include accelerators and beams, space physics, astrophysics, computational physics and applied mathematics, fusion plasmas, fundamental experiments and theory, radiation sources, low temperature plasmas, and plasma-surface interactions. The PLSC is well prepared to respond to requests for studies on specific issues. This report discusses ion of the PLSC work

  20. Phosphate steering by Flap Endonuclease 1 promotes 5′-flap specificity and incision to prevent genome instability

    KAUST Repository

    Tsutakawa, Susan E.; Thompson, Mark J.; Arvai, Andrew S.; Neil, Alexander J.; Shaw, Steven J.; Algasaier, Sana I.; Kim, Jane C.; Finger, L. David; Jardine, Emma; Gotham, Victoria J.B.; Sarker, Altaf H.; Her, Mai Z.; Rashid, Fahad; Hamdan, Samir; Mirkin, Sergei M.; Grasby, Jane A.; Tainer, John A.

    2017-01-01

    and large-scale trinucleotide (GAA) repeat expansions in vivo, implying failed phosphate-steering promotes an unanticipated lagging-strand template-switch mechanism during replication. Thus, phosphate steering is an unappreciated FEN1 function that enforces

  1. Rebuilding a Research Ethics Committee

    Science.gov (United States)

    Biggs, John S. G.; Marchesi, August

    2013-01-01

    The principal ethics committee in Australia's Capital, Canberra, underwent a major revision in the last three years based on changes debated in the literature. Committee or Board structure varies widely; regulations determining minimum size and membership differ between countries. Issues such as the effectiveness of committee management,…

  2. Collision-model approach to steering of an open driven qubit

    Science.gov (United States)

    Beyer, Konstantin; Luoma, Kimmo; Strunz, Walter T.

    2018-03-01

    We investigate quantum steering of an open quantum system by measurements on its environment in the framework of collision models. As an example we consider a coherently driven qubit dissipatively coupled to a bath. We construct local nonadaptive and adaptive as well as nonlocal measurement scenarios specifying explicitly the measured observable on the environment. Our approach shows transparently how the conditional evolution of the open system depends on the type of the measurement scenario and the measured observables. These can then be optimized for steering. The nonlocal measurement scenario leads to maximal violation of the used steering inequality at zero temperature. Further, we investigate the robustness of the constructed scenarios against thermal noise. We find generally that steering becomes harder at higher temperatures. Surprisingly, the system can be steered even when bipartite entanglement between the system and individual subenvironments vanishes.

  3. Guidelines for conducting pharmaceutical budget impact analyses for submission to public drug plans in Canada.

    Science.gov (United States)

    Marshall, Deborah A; Douglas, Patrick R; Drummond, Michael F; Torrance, George W; Macleod, Stuart; Manti, Orlando; Cheruvu, Lokanadha; Corvari, Ron

    2008-01-01

    , the characterisation of uncertainty, discounting, and validation methods). The Inputs and Data Sources section addresses methods for market size estimation, comparator selection, scenario forecasting and drug price estimation. The Reporting Format section describes methods for BIA reporting. The new Canadian BIA Guidelines represent a significant departure from the limited guidance that was previously available from some of the provinces, because they include specific details of the methods of performing BIAs. The Canadian BIA Guidelines differ from the Principles of Good Research Practice for BIAs developed by the International Society for Pharmacoeconomic and Outcomes Research (ISPOR), which provide more general guidance. The Canadian BIA Guidelines and template build upon existing guidance to address the specific requirements of each of the participating drug plans in Canada. Both have been endorsed by the NPDUIS Steering Committee and the PMPRB for the standardization of BIA submissions.

  4. Spent nuclear fuel project high-level information management plan

    Energy Technology Data Exchange (ETDEWEB)

    Main, G.C.

    1996-09-13

    This document presents the results of the Spent Nuclear Fuel Project (SNFP) Information Management Planning Project (IMPP), a short-term project that identified information management (IM) issues and opportunities within the SNFP and outlined a high-level plan to address them. This high-level plan for the SNMFP IM focuses on specific examples from within the SNFP. The plan`s recommendations can be characterized in several ways. Some recommendations address specific challenges that the SNFP faces. Others form the basis for making smooth transitions in several important IM areas. Still others identify areas where further study and planning are indicated. The team`s knowledge of developments in the IM industry and at the Hanford Site were crucial in deciding where to recommend that the SNFP act and where they should wait for Site plans to be made. Because of the fast pace of the SNFP and demands on SNFP staff, input and interaction were primarily between the IMPP team and members of the SNFP Information Management Steering Committee (IMSC). Key input to the IMPP came from a workshop where IMSC members and their delegates developed a set of draft IM principles. These principles, described in Section 2, became the foundation for the recommendations found in the transition plan outlined in Section 5. Availability of SNFP staff was limited, so project documents were used as a basis for much of the work. The team, realizing that the status of the project and the environment are continually changing, tried to keep abreast of major developments since those documents were generated. To the extent possible, the information contained in this document is current as of the end of fiscal year (FY) 1995. Programs and organizations on the Hanford Site as a whole are trying to maximize their return on IM investments. They are coordinating IM activities and trying to leverage existing capabilities. However, the SNFP cannot just rely on Sitewide activities to meet its IM requirements

  5. Avoiding Internal Capsule Stimulation With a New Eight-Channel Steering Deep Brain Stimulation Lead.

    Science.gov (United States)

    van Dijk, Kees J; Verhagen, Rens; Bour, Lo J; Heida, Ciska; Veltink, Peter H

    2017-10-15

    Novel deep brain stimulation (DBS) lead designs are currently entering the market, which are hypothesized to provide a way to steer the stimulation field away from neural populations responsible for side effects and towards populations responsible for beneficial effects. The objective of this study is to assess the performances of a new eight channel steering-DBS lead and compare this with a conventional cylindrical contact (CC) lead. The two leads were evaluated in a finite element electric field model combined with multicompartment neuron and axon models, representing the internal capsule (IC) fibers and subthalamic nucleus (STN) cells. We defined the optimal stimulation setting as the configuration that activated the highest percentage of STN cells, without activating any IC fibers. With this criterion, we compared monopolar stimulation using a single contact of the steering-DBS lead and CC lead, on three locations and four orientations of the lead. In addition, we performed a current steering test case by dividing the current over two contacts with the steering-DBS lead in its worst-case orientation. In most cases, the steering-DBS lead is able to stimulate a significantly higher percentage of STN cells compared to the CC lead using single contact stimulation or using a two contact current steering protocol when there is approximately a 1 mm displacement of the CC lead. The results also show that correct placement and orientation of the lead in the target remains an important aspect in achieving the optimal stimulation outcome. Currently, clinical trials are set up in Europe with a similar design as the steering-DBS lead. Our results illustrate the importance of the orientation of the new steering-DBS lead in avoiding side effects induced by stimulation of IC fibers. Therefore, in clinical trials sufficient attention should be paid to implanting the steering DBS-lead in the most effective orientation. © 2017 International Neuromodulation Society.

  6. ICRP new recommendations. Committee 2's efforts

    International Nuclear Information System (INIS)

    Eckerman, K.F.

    2007-01-01

    The International Commission on Radiological Protection (ICRP) may release new primary radiation protection recommendation in 2007. Committee 2 has underway reviews of the dosimetric and biokinetic models and associated data used in calculating dose coefficients for intakes of radionuclides and exposures to external radiation fields. This paper outlines the work plans of Committee 2 during the current term, 2005-2009, in anticipation of the new primary recommendations. The two task groups of Committee 2 responsible for the computations of dose coefficients, INDOS and DOCAL, are reviewing the models and data used in the computations. INDOS is reviewing the lung model and the biokinetic models that describe the behavior of the radionuclides in the body. DOCAL is reviewing its computational formulations with the objective of harmonizing the formulation with those of nuclear medicine, and developing new computational phantoms representing the adult male and female reference individuals of ICRP Publication 89. In addition, DOCAL will issue a publication on nuclear decay data to replace ICRP Publication 38. While the current efforts are focused on updating the dose coefficients for occupational intakes of radionuclides plans are being formulated to address dose coefficients for external radiation fields which include consideration of high energy fields associated with accelerators and space travel and the updating of dose coefficients for members of the public. (author)

  7. Mechanical design aspects of a "Long-Waveguide" version of the remote steering ECRH upper port launcher for ITER

    NARCIS (Netherlands)

    Ronden, D. M. S.; van den Berg, M.; Bongers, W. A.; Elzendoorn, B. S. Q.; M. F. Graswinckel,; Lamers, B.; Van Nigtevecht, K.; Verhoeven, A. G. A.; Henderson, M. A.

    2008-01-01

    The current status of the mechanical design of the remote steering electron cyclotron resonance heating upper port launching system for ITER is presented. Although an alternative front steering launcher has now been selected as the reference design for ITER, the development of a remote steering

  8. Performance of a remote steering antenna for ECRH/ECCS applications using 4-wall corrugated square waveguide

    International Nuclear Information System (INIS)

    Kasparek, W.; Gantenbein, G.; Plaum, B.; Wacker, R.; Filipovic, E.; Chirkov, A.V.; Denisov, G.G.; Kuzikov, S.V.; Ohkubo, K.; Hollmann, F.; Wagner, D.

    2003-01-01

    For the upper ECW launcher on ITER, the use of a 'remote steering antenna' based on the imaging properties of rectangular waveguides is planned. To characterise launchers of this type, low-power experiments on a 4-side corrugated square waveguide with a scanning mirror at the input of the waveguide were performed in the frequency range of 140 to 160 GHz. It is shown, that elliptical polarisation needed for ECCD can be transmitted without depolarization. The usable steering range of the antenna is at least -10 angle < φ ≤ + 10 angle. Experiments with the scanning plane in the diagonal of the square waveguide led to a negligible increase the scanning range, and lobes in the upward and downward direction are detected at larger scanning angles. Mitre bends can be integrated into the waveguide without prohibitive extra loss, which is demonstrated by far-field measurements. Detailed calorimetric measurements for this set up confirm this statement for the polarisation perpendicular to the scanning plane, whereas extra loss is measured for the parallel polarisation. Results are discussed and are compared to theory. (authors)

  9. Adiabatically steered open quantum systems: Master equation and optimal phase

    International Nuclear Information System (INIS)

    Salmilehto, J.; Solinas, P.; Ankerhold, J.; Moettoenen, M.

    2010-01-01

    We introduce an alternative way to derive the generalized form of the master equation recently presented by J. P. Pekola et al. [Phys. Rev. Lett. 105, 030401 (2010)] for an adiabatically steered two-level quantum system interacting with a Markovian environment. The original derivation employed the effective Hamiltonian in the adiabatic basis with the standard interaction picture approach but without the usual secular approximation. Our approach is based on utilizing a master equation for a nonsteered system in the first superadiabatic basis. It is potentially efficient in obtaining higher-order equations. Furthermore, we show how to select the phases of the adiabatic eigenstates to minimize the local adiabatic parameter and how this selection leads to states which are invariant under a local gauge change. We also discuss the effects of the adiabatic noncyclic geometric phase on the master equation.

  10. Lightweight computational steering of very large scale molecular dynamics simulations

    International Nuclear Information System (INIS)

    Beazley, D.M.

    1996-01-01

    We present a computational steering approach for controlling, analyzing, and visualizing very large scale molecular dynamics simulations involving tens to hundreds of millions of atoms. Our approach relies on extensible scripting languages and an easy to use tool for building extensions and modules. The system is extremely easy to modify, works with existing C code, is memory efficient, and can be used from inexpensive workstations and networks. We demonstrate how we have used this system to manipulate data from production MD simulations involving as many as 104 million atoms running on the CM-5 and Cray T3D. We also show how this approach can be used to build systems that integrate common scripting languages (including Tcl/Tk, Perl, and Python), simulation code, user extensions, and commercial data analysis packages

  11. Microstructure, Macrostructure and the Steering of Material Proclivities

    DEFF Research Database (Denmark)

    Ayres, Phil

    2012-01-01

    This article reports upon recent and initial explorations by the author in the hydroforming of steel. The material processes involved and the resulting artefacts are reflected upon, providing a ground from which to speculate about implications for architecture as both artefact and practice...... are steerable but not exclusively dependant upon profile geometry. The definition of geometry leading to physical outcome is familiar design territory. The forming method can be arrested and resumed arbitrarily. The notion of an extended forming process presents interesting implications to the linear...... the ideal, predictive and pre‐determined. This is less familiar design territory. This work begins to define both a material language for, and a non‐deterministic design paradigm of, steered proclivity. A conceptual framework for this paradigm is sketched out and presented in the form of the Persistent...

  12. Fractional Control of An Active Four-wheel-steering Vehicle

    Science.gov (United States)

    Wang, Tianting; Tong, Jun; Chen, Ning; Tian, Jie

    2018-03-01

    A four-wheel-steering (4WS) vehicle model and reference model with a drop filter are constructed. The decoupling of 4WS vehicle model is carried out. And a fractional PIλDμ controller is introduced into the decoupling strategy to reduce the effects of the uncertainty of the vehicle parameters as well as the unmodelled dynamics on the system performance. Based on optimization techniques, the design of fractional controller are obtained to ensure the robustness of 4WS vehicle during the special range of frequencies through proper choice of the constraints. In order to compare with fractional robust controller, an optimal controller for the same vehicle is also designed. The simulations of the two control systems are carried out and it reveals that the decoupling and fractional robust controller is able to make vehicle model trace the reference model very well with better robustness.

  13. Influence of orographically steered winds on Mutsu Bay surface currents

    Science.gov (United States)

    Yamaguchi, Satoshi; Kawamura, Hiroshi

    2005-09-01

    Effects of spatially dependent sea surface wind field on currents in Mutsu Bay, which is located at the northern end of Japanese Honshu Island, are investigated using winds derived from synthetic aperture radar (SAR) images and a numerical model. A characteristic wind pattern over the bay was evidenced from analysis of 118 SAR images and coincided with in situ observations. Wind is topographically steered with easterly winds entering the bay through the terrestrial gap and stronger wind blowing over the central water toward its mouth. Nearshore winds are weaker due to terrestrial blockages. Using the Princeton Ocean Model, we investigated currents forced by the observed spatially dependent wind field. The predicted current pattern agrees well with available observations. For a uniform wind field of equal magnitude and average direction, the circulation pattern departs from observations demonstrating that vorticity input due to spatially dependent wind stress is essential in generation of the wind-driven current in Mutsu Bay.

  14. Model projections of atmospheric steering of Sandy-like superstorms.

    Science.gov (United States)

    Barnes, Elizabeth A; Polvani, Lorenzo M; Sobel, Adam H

    2013-09-17

    Superstorm Sandy ravaged the eastern seaboard of the United States, costing a great number of lives and billions of dollars in damage. Whether events like Sandy will become more frequent as anthropogenic greenhouse gases continue to increase remains an open and complex question. Here we consider whether the persistent large-scale atmospheric patterns that steered Sandy onto the coast will become more frequent in the coming decades. Using the Coupled Model Intercomparison Project, phase 5 multimodel ensemble, we demonstrate that climate models consistently project a decrease in the frequency and persistence of the westward flow that led to Sandy's unprecedented track, implying that future atmospheric conditions are less likely than at present to propel storms westward into the coast.

  15. Sugar transport across lactose permease probed by steered molecular dynamics

    DEFF Research Database (Denmark)

    Jensen, Morten Østergaard; Yin, Ying; Tajkhorshid, Emad

    2007-01-01

    Escherichia coli lactose permease (LacY) transports sugar across the inner membrane of the bacterium using the proton motive force to accumulate sugar in the cytosol. We have probed lactose conduction across LacY using steered molecular dynamics, permitting us to follow molecular and energetic...... details of lactose interaction with the lumen of LacY during its permeation. Lactose induces a widening of the narrowest parts of the channel during permeation, the widening being largest within the periplasmic half-channel. During permeation, the water-filled lumen of LacY only partially hydrates lactose......, forcing it to interact with channel lining residues. Lactose forms a multitude of direct sugar-channel hydrogen bonds, predominantly with residues of the flexible N-domain, which is known to contribute a major part of LacY's affinity for lactose. In the periplasmic half-channel lactose predominantly...

  16. DYNAMICS BASED CONTROL OF A SKID STEERING MOBILE ROBOT

    Directory of Open Access Journals (Sweden)

    Osama Elshazly

    2016-06-01

    Full Text Available In this paper, development of a reduced order, augmented dynamics-drive model that combines both the dynamics and drive subsystems of the skid steering mobile robot (SSMR is presented. A Linear Quadratic Regulator (LQR control algorithm with feed-forward compensation of the disturbances part included in the reduced order augmented dynamics-drive model is designed. The proposed controller has many advantages such as its simplicity in terms of design and implementation in comparison with complex nonlinear control schemes that are usually designed for this system. Moreover, the good performance is also provided by the controller for the SSMR comparable with a nonlinear controller based on the inverse dynamics which depends on the availability of an accurate model describing the system. Simulation results illustrate the effectiveness and enhancement provided by the proposed controller.

  17. Generalized internal model robust control for active front steering intervention

    Science.gov (United States)

    Wu, Jian; Zhao, Youqun; Ji, Xuewu; Liu, Yahui; Zhang, Lipeng

    2015-03-01

    Because of the tire nonlinearity and vehicle's parameters' uncertainties, robust control methods based on the worst cases, such as H ∞, µ synthesis, have been widely used in active front steering control, however, in order to guarantee the stability of active front steering system (AFS) controller, the robust control is at the cost of performance so that the robust controller is a little conservative and has low performance for AFS control. In this paper, a generalized internal model robust control (GIMC) that can overcome the contradiction between performance and stability is used in the AFS control. In GIMC, the Youla parameterization is used in an improved way. And GIMC controller includes two sections: a high performance controller designed for the nominal vehicle model and a robust controller compensating the vehicle parameters' uncertainties and some external disturbances. Simulations of double lane change (DLC) maneuver and that of braking on split- µ road are conducted to compare the performance and stability of the GIMC control, the nominal performance PID controller and the H ∞ controller. Simulation results show that the high nominal performance PID controller will be unstable under some extreme situations because of large vehicle's parameters variations, H ∞ controller is conservative so that the performance is a little low, and only the GIMC controller overcomes the contradiction between performance and robustness, which can both ensure the stability of the AFS controller and guarantee the high performance of the AFS controller. Therefore, the GIMC method proposed for AFS can overcome some disadvantages of control methods used by current AFS system, that is, can solve the instability of PID or LQP control methods and the low performance of the standard H ∞ controller.

  18. Combining coordination of motion actuators with driver steering interaction.

    Science.gov (United States)

    Tagesson, Kristoffer; Laine, Leo; Jacobson, Bengt

    2015-01-01

    A new method is suggested for coordination of vehicle motion actuators; where driver feedback and capabilities become natural elements in the prioritization. The method is using a weighted least squares control allocation formulation, where driver characteristics can be added as virtual force constraints. The approach is in particular suitable for heavy commercial vehicles that in general are over actuated. The method is applied, in a specific use case, by running a simulation of a truck applying automatic braking on a split friction surface. Here the required driver steering angle, to maintain the intended direction, is limited by a constant threshold. This constant is automatically accounted for when balancing actuator usage in the method. Simulation results show that the actual required driver steering angle can be expected to match the set constant well. Furthermore, the stopping distance is very much affected by this set capability of the driver to handle the lateral disturbance, as expected. In general the capability of the driver to handle disturbances should be estimated in real-time, considering driver mental state. By using the method it will then be possible to estimate e.g. stopping distance implied from this. The setup has the potential of even shortening the stopping distance, when the driver is estimated as active, this compared to currently available systems. The approach is feasible for real-time applications and requires only measurable vehicle quantities for parameterization. Examples of other suitable applications in scope of the method would be electronic stability control, lateral stability control at launch and optimal cornering arbitration.

  19. Dynamic steering beams for efficient force measurement in optical manipulation

    Institute of Scientific and Technical Information of China (English)

    Xiaocong Yuan; Yuquan Zhang; Rui Cao; Xing Zhao; Jing Bu; Siwei Zhu

    2011-01-01

    @@ An efficient and inexpensive method that uses a glass plate mounted onto a motorized rotating stage as a beam-steering device for the generation of dynamic optical traps is reported.Force analysis reveals that there are drag and trapping forces imposed on the bead in the opposite directions, respectively, in a viscous medium.The trapped bead will be rotated following the beam's motion before it reaches the critical escape velocity when the drag force is equal to the optical trapping force.The equilibrium condition facilitates the experimental measurement of the drag force with potential extensions to the determination of the viscosity of the medium or the refractive index of the bead.The proposed technique can easily be integrated into conventional optical microscopic systems with minimum modifications.%An efficient and inexpensive method that uses a glass plate mounted onto a motorized rotating stage as a beam-steering device for the generation of dynamic optical traps is reported. Force analysis reveals that there are drag and trapping forces imposed on the bead in the opposite directions, respectively, in a viscous medium. The trapped bead will be rotated following the beam's motion before it reaches the critical escape velocity when the drag force is equal to the optical trapping force. The equilibrium condition facilitates the experimental measurement of the drag force with potential extensions to the determination of the viscosity of the medium or the refractive index of the bead. The proposed technique can easily be integrated into conventional optical microscopic systems with minimum modifications.

  20. Fast-steering solutions for cubesat-scale optical communications

    Science.gov (United States)

    Kingsbury, R. W.; Nguyen, T.; Riesing, K.; Cahoy, K.

    2017-11-01

    We describe the design of a compact free-space optical communications module for use on a nanosatellite and present results from a detailed trade study to select an optical fine steering mechanism compatible with our stringent size, weight and power (SWaP) constraints. This mechanism is an integral component of the compact free-space optical communications system that is under development at the MIT Space Systems Laboratory [1]. The overall goal of this project is to develop a laser communications (lasercom) payload that fits within the SWaP constraints of a typical ``3U'' CubeSat. The SWaP constraints for the entire lasercom payload are 5 cm × 10 cm × 10 cm, 600 g and 10W. Although other efforts are underway to qualify MEMS deformable mirrors for use in CubeSats [2], there has been very little work towards qualifying tip-tilt MEMS mirrors [3]. Sec. II provides additional information on how the fast steering mechanism is used in our lasercom system. Performance requirements and desirable traits of the mechanism are given. In Sec. III we describe the various types of compact tip-tilt mirrors that are commercially available as well as the justification for selecting a MEMS-based device for our application. Sec. IV presents an analysis of the device's transfer function characteristics and ways of predicting this behavior that are suitable for use in the control processor. This analysis is based upon manufacturer-provided test data which was collected at standard room conditions. In the final section, we describe on-going work to build a testbed that will be used to measure device performance in a thermal chamber.

  1. 77 FR 32639 - HIT Standards Committee and HIT Policy Committee; Call for Nominations

    Science.gov (United States)

    2012-06-01

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee and HIT Policy Committee; Call for... Health Information Technology Policy Committee (HITPC). Name of Committees: HIT Standards Committee and HIT Policy Committee. General Function of the Committees: The HITSC is charged to provide...

  2. Ocean Studies Board annual report 1989 and future plans

    International Nuclear Information System (INIS)

    1990-01-01

    The major activities of the Ocean Studies Board of the National Research Council for 1989 are reviewed. The following are discussed: the Navy Panel, the CO2 Panel, the Committee on the Ocean's Role in Global Change, the Committee on the Coastal Ocean, the Workshop on Issues of U.S. Marine Fisheries, and the Continental Margins Workshop Committee. Future plans are covered

  3. Standing Concertation Committee

    CERN Multimedia

    HR Department

    2009-01-01

    The main items discussed at the meetings of the Standing Concertation Committee in the first quarter of 2009 included: Merit Appraisal and Recognition Scheme (MARS) 2009 exercise The committee took note of 2009 MARS ceiling guidelines giving the advancement budget by career path and amounting to approx 1.80% of the basic salary bill. To this will be added 250 steps CERN-wide, financed by savings from implementation of the international indemnity for 2007, 2008 and the first half of 2009. The specific Senior Staff Guidelines, including the proposed number of promotions from Career Path E to F, were also noted. The guidelines with respect to step distribution were also noted: the minima and maxima remain the same as in previous years. Compliance with the guidelines will continue to be monitored closely (more details, including a frequently asked questions section). It was also noted that Financial Awards (awards for extraordinary service and responsibility allowances) may b...

  4. Committees and sponsors

    Science.gov (United States)

    2011-10-01

    International Advisory Committee Richard F CastenYale, USA Luiz Carlos ChamonSão Paulo, Brazil Osvaldo CivitareseLa Plata, Argentina Jozsef CsehATOMKI, Hungary Jerry P DraayerLSU, USA Alfredo Galindo-UribarriORNL & UT, USA James J KolataNotre Dame, USA Jorge López UTEP, USA Joseph B NatowitzTexas A & M, USA Ma Esther Ortiz IF-UNAM Stuart PittelDelaware, USA Andrés SandovalIF-UNAM Adam SzczepaniakIndiana, USA Piet Van IsackerGANIL, France Michael WiescherNotre Dame, USA Organizing Committee Libertad Barrón-Palos (Chair)IF-UNAM Roelof BijkerICN-UNAM Ruben FossionICN-UNAM David LizcanoININ Sponsors Instituto de Ciencias Nucleares, UNAMInstituto de Física, UNAMInstituto Nacional de Investigaciones NuclearesDivisión de Física Nuclear de la SMFCentro Latinoamericano de Física

  5. Joint Integration Office Independent Review Committee annual report, 1985

    International Nuclear Information System (INIS)

    1986-08-01

    Comprised of seven persons with extensive experience in the issues of nuclear waste, the Independent Review Committee (IRC) provides independent and objective review of Defense Transuranic Waste Program (DTWP) activities managed by the Joint Integration Office (JIO), formerly the Defense Transuranic Waste Lead Organization (TLO). The Committee is ensured a broad, interdisciplinary perspective since its membership includes representatives from the fields of nuclear engineering, nuclear waste transportation, industrial quality control, systems and environmental engineering and state and local government. The scope of IRC activities includes overall review of specific TLO plans, projects and activities, and technical review of particular research and development projects. The Committee makes specific suggestions and recommendations based upon expertise in the field of TRU Waste Management. The IRC operates as a consulting group, under an independent charter providing objective review of program activities. This report summarizes the 12 major topics reviewed by the committee during 1985

  6. Regulatory Review Committee update

    Energy Technology Data Exchange (ETDEWEB)

    Steele, T. [Polishuk, Camman and Steele, London ON (Canada)

    2001-07-01

    The Committee's objectives, current membership and current issues are reviewed. Each current issue, notably the consultation process with the Ministry of Natural Resources, appeal of Ministry actions, orphan wells/security deposits, oilfield fluid disposal and labour code practices review are discussed in some detail. Dissatisfaction with the current appeals process to the Ministry is highlighted, along with a search for an all encompassing solution. The orphan well problem also received considerable attention, with similar demands for a comprehensive solution.

  7. Annex 5. Monitoring committee

    OpenAIRE

    2013-01-01

    Head of monitoring committee: the Research Commission of the govern­ment of French Polynesia. Panel members Representatives of the following organisations: IRD centre in Papeete Oceanologic Center of the Pacific/Ifremer Investment Promotion Authority Environment Division EPIC Vanille Institut Louis-Malardé Gepsun “Natural Substances process engineering” technology platform (cf. Abbreviations) Fisheries Division Economic Affairs Division External Trade Division Development of Industry and the...

  8. Environment Committee report

    International Nuclear Information System (INIS)

    Greenhalgh, Geoffrey.

    1986-01-01

    The findings of the House of Commons Environment Committee (March 1986) on radioactive waste are examined. The report includes 43 recommendations and conclusions, many of which are directed at improving public acceptance of nuclear power, rather than constituting an attack on the nuclear industry. Some of the major topics considered in the report include: waste disposal, waste classification, waste disposal policy, discharges, reprocessing, and public acceptance. (UK)

  9. Towards a New Planning Vocabulary

    DEFF Research Database (Denmark)

    Luscher, Andreas; Laursen, Lea Louise Holst

    2016-01-01

    The main tenet of this paper is that current planning approaches are insufficient to handle the transformation of shrinking territories from an urban design point of view. The paper will address and explore the re-thinking of planning and design approaches to shrinking territories by characterizing...... the behaviors and characteristics of environments suffering from decline in population and economy. The paper unveils the positive as well as the negative aspects of the different design interventions conducted and shows which agencies are behind the initiatives. It categorizes both predictable...... to develop a catalogue both of representative and nonconventional approaches to steering the rehabilitation of shrinking territories....

  10. ACNW - 1998 strategic plan

    International Nuclear Information System (INIS)

    1998-01-01

    This plan provides strategic direction to The Advisory Committee on Nuclear Waste (ACNW) in 1998 and beyond for focusing on issues most important to the NRC in carrying out its mission of protecting public health and safety, promoting the common defense and security, and protecting the environment

  11. Standing Concertation Committee

    CERN Multimedia

    2007-01-01

    Ordinary meeting on 30 January 2007 The main items discussed at the meeting of the Standing Concertation Committee on 30 January 2007 included: Administrative Circular No. 26: with the introduction of the merit recognition system in the framework of the 5-yearly review of CERN employment conditions, Administrative Circular No. 26 has been revised. The committee took note of the revised document which is being finalized for submission to the Director-General for approval in the near future. Technical analysis of CERN Health Insurance Scheme: the Committee was informed that a group has been set up by the Director-General to analyse the financial situation of the CERN Health Insurance Scheme in the short and long term, and to propose measures to ensure that the Scheme remains in financial balance, with adequate cover, over the medium term. The group's terms of reference and membership were communicated. Voluntary programmes It was announced that the programmes: 'part-time work as a pre-retirement measure...

  12. Standing Concertation Committee

    CERN Multimedia

    2007-01-01

    ORDINARY MEETING ON 30 JANUARY 2007 The main items discussed at the meeting of the Standing Concertation Committee on 30 January 2007 included: Administrative Circular No. 26: with the introduction of the merit recognition system in the framework of the 5-yearly review of CERN employment conditions, Administrative Circular No. 26 has been revised. The Committee took note of the revised document which is being finalized for submission to the Director-General for approval in the near future. Technical analysis of CERN Health Insurance Scheme: the Committee was informed that a group has been set up by the Director-General to analyse the financial situation of the CERN Health Insurance Scheme in the short and long term, and to propose measures to ensure that the Scheme remains in financial balance, with adequate cover, over the medium term. The group's terms of reference and membership were communicated. Voluntary programmes It was announced that the programmes: 'part-time work as a pre-retirement mea...

  13. Monogamy inequalities for the Einstein-Podolsky-Rosen paradox and quantum steering

    Science.gov (United States)

    Reid, M. D.

    2013-12-01

    Monogamy inequalities for the way bipartite Einstein-Podolsky-Rosen (EPR) steering can be distributed among N systems are derived. One set of inequalities is based on witnesses with two measurement settings, and may be used to demonstrate correlation of outcomes between two parties, that cannot be shared with more parties. It is shown that the monogamy for steering is directional. Two parties cannot independently demonstrate steering of a third system, using the same two-setting steering witness, but it is possible for one party to steer two independent systems. This result explains the monogamy of two-setting Bell inequality violations and the sensitivity of the continuous variable (CV) EPR criterion to losses on the steering party. We generalize to m settings. A second type of monogamy relation gives the quantitative amount of sharing possible, when the number of parties is less than or equal to m, and takes a form similar to the Coffman-Kundu-Wootters relation for entanglement. The results enable characterization of the tripartite steering for CV Gaussian systems and qubit Greenberger-Horne-Zeilinger and W states.

  14. Test of Einstein-Podolsky-Rosen steering based on the all-versus-nothing proof.

    Science.gov (United States)

    Wu, Chunfeng; Chen, Jing-Ling; Ye, Xiang-Jun; Su, Hong-Yi; Deng, Dong-Ling; Wang, Zhenghan; Oh, C H

    2014-03-06

    In comparison with entanglement and Bell nonlocality, Einstein-Podolsky-Rosen steering is a newly emerged research topic and in its incipient stage. Although Einstein-Podolsky-Rosen steering has been explored via violations of steering inequalities both theoretically and experimentally, the known inequalities in the literatures are far from well-developed. As a result, it is not yet possible to observe Einstein-Podolsky-Rosen steering for some steerable mixed states. Recently, a simple approach was presented to identify Einstein-Podolsky-Rosen steering based on all-versus-nothing argument, offering a strong condition to witness the steerability of a family of two-qubit (pure or mixed) entangled states. In this work, we show that the all-versus-nothing proof of Einstein-Podolsky-Rosen steering can be tested by measuring the projective probabilities. Through the bound of probabilities imposed by local-hidden-state model, the proposed test shows that steering can be detected by the all-versus-nothing argument experimentally even in the presence of imprecision and errors. Our test can be implemented in many physical systems and we discuss the possible realizations of our scheme with non-Abelian anyons and trapped ions.

  15. Chaos vibration of pinion and rack steering trapezoidal mechanism containing two clearances

    Science.gov (United States)

    Wei, Daogao; Wang, Yu; Jiang, Tong; Zheng, Sifa; Zhao, Wenjing; Pan, Zhijie

    2017-08-01

    The multi-clearances of breaking type steering trapezoidal mechanism joints influences vehicle steering stability. Hence, to ascertain the influence of clearance value on steering stability, this paper takes the steering mechanism of a certain vehicle type as a prototype that can be simplified into a planar six-bar linkage, then establishes the system dynamic differential equations after considering the two clearances of tie rods and the steering knuckle arms. The influence of the clearance parameters on the movement stability of the steering mechanism is studied using a numerical computation method. Results show that when the two clearances are equal, the planar movement of the tie rods changes from period-doubling to chaos as the clearances increase. When the two clearances are 0.25 mm and 1.5 mm respectively, the planar movements of the two side tie rods come into chaos, causing the steering stability to deteriorate. Moreover, with the increase of clearances, turning moment fluctuates more intensively and the peak value increases.

  16. Complaint-adaptive power density optimization as a tool for HTP-guided steering in deep hyperthermia treatment of pelvic tumors

    International Nuclear Information System (INIS)

    Canters, R A M; Franckena, M; Zee, J van der; Rhoon, G C van

    2008-01-01

    For an efficient clinical use of HTP (hyperthermia treatment planning), optimization methods are needed. In this study, a complaint-adaptive PD (power density) optimization as a tool for HTP-guided steering in deep hyperthermia of pelvic tumors is developed and tested. PD distribution in patients is predicted using FE-models. Two goal functions, Opt1 and Opt2, are applied to optimize PD distributions. Optimization consists of three steps: initial optimization, adaptive optimization after a first complaint and increasing the weight of a region after recurring complaints. Opt1 initially considers only target PD whereas Opt2 also takes into account hot spots. After patient complaints though, both limit PD in a region. Opt1 and Opt2 are evaluated in a phantom test, using patient models and during hyperthermia treatment. The phantom test and a sensitivity study in ten patient models, show that HTP-guided steering is most effective in peripheral complaint regions. Clinical evaluation in two groups of five patients shows that time between complaints is longer using Opt2 (p = 0.007). However, this does not lead to significantly different temperatures (T50s of 40.3 (Opt1) versus 40.1 deg. C (Opt2) (p = 0.898)). HTP-guided steering is feasible in terms of PD reduction in complaint regions and in time consumption. Opt2 is preferable in future use, because of better complaint reduction and control.

  17. Leadership Quality for Malaysia Construction Leader to Steer a Success Construction Project

    Directory of Open Access Journals (Sweden)

    Ngah Nasaruddin Nur Ain

    2016-01-01

    Full Text Available Issues that dominate the construction industry for the long time such as time overrun, cost overrun, quality of construction and also safety during the construction process are difficult to resolve because of several factors involved which amongst them are leadership quality in the industry. Solving these issues can make the industry more sustainable in nature. This paper presents the need of leadership quality among construction parties involved to steer a construction project successfully. Literature work found that 11 leadership qualities to ensure construction project success. From the frequency analysis, five most dominant leadership qualities are team building, communication skill, visioning, planning & strategy skill, and decision making. Beside the literature, this study also seeks an opinion from a senior leader of a successful construction company regarding the need of these qualities amongst parties to resolve the construction issues. The results from an interview session indicate that he fully agreed with the need of all the qualities in the construction industry. This shows that there is a strong relationship between solving the issues with the leadership quality in ensuring construction project success. These qualities should be further investigated to acquire a better representation of leadership quality in resolving construction issues for Malaysia construction industry.

  18. 75 FR 21678 - Business and Operations Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2010-04-26

    ... Management/Leadership Development. May 19, 2010 NSF Strategic Plan Update--2010-2015; Future NSF-2013 Lease... NATIONAL SCIENCE FOUNDATION Business and Operations Advisory Committee; Notice of Meeting In... announces the following meeting: Name: Business and Operations Advisory Committee (9556). Date/Time: May 18...

  19. 75 FR 57276 - Office of the National Coordinator for Health Information Technology; HIT Policy Committee...

    Science.gov (United States)

    2010-09-20

    ...: Health IT Policy Committee's Governance Workgroup. General Function of the Health IT Policy Committee: To... use of health information as is consistent with the Federal Health IT Strategic Plan and that includes... needed. Purpose of the Governance Workgroup: To draft a set of recommendations on the scope and process...

  20. 78 FR 63222 - Pediatric Oncology Subcommittee of the Oncologic Drugs Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2013-10-23

    ...] Pediatric Oncology Subcommittee of the Oncologic Drugs Advisory Committee; Notice of Meeting AGENCY: Food... the public. Name of Committee: Pediatric Oncology Subcommittee of the Oncologic Drugs Advisory... measures in the pediatric development plans of oncology products. The half-day session will provide an...

  1. Statistical analysis plan for the family-led rehabilitation after stroke in India (ATTEND) trial: A multicenter randomized controlled trial of a new model of stroke rehabilitation compared to usual care.

    Science.gov (United States)

    Billot, Laurent; Lindley, Richard I; Harvey, Lisa A; Maulik, Pallab K; Hackett, Maree L; Murthy, Gudlavalleti Vs; Anderson, Craig S; Shamanna, Bindiganavale R; Jan, Stephen; Walker, Marion; Forster, Anne; Langhorne, Peter; Verma, Shweta J; Felix, Cynthia; Alim, Mohammed; Gandhi, Dorcas Bc; Pandian, Jeyaraj Durai

    2017-02-01

    Background In low- and middle-income countries, few patients receive organized rehabilitation after stroke, yet the burden of chronic diseases such as stroke is increasing in these countries. Affordable models of effective rehabilitation could have a major impact. The ATTEND trial is evaluating a family-led caregiver delivered rehabilitation program after stroke. Objective To publish the detailed statistical analysis plan for the ATTEND trial prior to trial unblinding. Methods Based upon the published registration and protocol, the blinded steering committee and management team, led by the trial statistician, have developed a statistical analysis plan. The plan has been informed by the chosen outcome measures, the data collection forms and knowledge of key baseline data. Results The resulting statistical analysis plan is consistent with best practice and will allow open and transparent reporting. Conclusions Publication of the trial statistical analysis plan reduces potential bias in trial reporting, and clearly outlines pre-specified analyses. Clinical Trial Registrations India CTRI/2013/04/003557; Australian New Zealand Clinical Trials Registry ACTRN1261000078752; Universal Trial Number U1111-1138-6707.

  2. Feed efficiency differences and reranking in beef steers fed grower and finisher diets.

    Science.gov (United States)

    Durunna, O N; Mujibi, F D N; Goonewardene, L; Okine, E K; Basarab, J A; Wang, Z; Moore, S S

    2011-01-01

    This 3-yr study used 490 steers to determine whether feedlot steers changed their feed efficiency (FE) ranking when fed a grower diet, then a finisher diet. The steers were crossbreds and were between 5 to 7 mo of age. There were 2 feeding periods each year. Within each year, approximately 90 steers had their diet switched from a grower to a finisher diet (feed-swap group), whereas another 90 steers were fed either the grower (grower-fed group) or the finisher (finisher-fed group) diet throughout the feeding trial. Each feeding test lasted for a minimum of 10 wk, and all steers were fed ad libitum. Individual animal feed intakes were collected using the GrowSafe feeding system, and BW were measured every 2 wk. Residual feed intake (RFI), G:F, and Kleiber ratio (KR) were computed at the end of each feeding period. For each measure of efficiency, animals were classified as low, medium, or high based on 0.5 SD from the mean. The majority of steers did not maintain the previous efficiency class in the second period. Approximately 58, 51, and 51% of steers in the feed-swap group, finisher-fed group, and the grower-fed group, respectively, changed their RFI measure by 0.5 SD. A low rank correlation occurred in all test groups but was less in the feed-swap group. Spearman rank correlations between the 2 feeding periods in the feed-swap group were 0.33, 0.20, and 0.31 for RFI, G:F, and KR, respectively. Classifications based on G:F and KR showed that a greater number of steers (P 0.05) between the proportions of individuals that changed or maintained their FE class. In the groups without a feed-swap, there was no difference (P > 0.05) in the proportion of steers that changed or maintained the same FE class for all FE measures. Our results suggest that diet type and feeding period affect the FE ranking in beef steers. A feedlot diet is ideal for evaluating the FE potential of steers for feedlot profitability; however, we suggest that tests involving less dense diets should

  3. Effects of steering demand on lane keeping behaviour, self-reports, and physiology. A simulator study.

    Science.gov (United States)

    Dijksterhuis, Chris; Brookhuis, Karel A; De Waard, Dick

    2011-05-01

    In this study a driving simulator was used to determine changes in mental effort in response to manipulations of steering demand. Changes in mental effort were assessed by using subjective effort ratings, physiology, and the standard deviation of the lateral position. Steering demand was increased by exposure to narrow lane widths and high density oncoming traffic while speed was fixed in all conditions to prevent a compensatory reaction. Results indicated that both steering demand factors influence mental effort expenditure and using multiple measures contributes to effort assessment. Application of these outcomes for adaptive automation is envisaged. Copyright © 2010 Elsevier Ltd. All rights reserved.

  4. 76 FR 18800 - NASA Advisory Council; Information Technology Infrastructure Committee; Meeting

    Science.gov (United States)

    2011-04-05

    ... Network Support IT Security Risk Management Ethics Briefing IT Committee Work Plan Actions/Assignments..., company affiliation (if applicable) to include address, telephone number, and their title, place of birth...

  5. 77 FR 27480 - Outer Continental Shelf Scientific Committee; Announcement of Plenary Session

    Science.gov (United States)

    2012-05-10

    ... data being produced to meet BOEM's scientific information needs for decision making and may recommend.../ecology, physical sciences, and social sciences) to review the specific research plans of BOEM's regional... Committee business. [[Page 27481

  6. 76 FR 55872 - Agenda and Notice of Public Meeting of the New Mexico Advisory Committee

    Science.gov (United States)

    2011-09-09

    .... Commission on Civil Rights (Commission), and the Federal Advisory Committee Act (FACA), that a planning....usccr.gov , or to contact the Rocky Mountain Regional Office at the above e-mail or street address. Deaf...

  7. 76 FR 16378 - Agenda and Notice of Public Meeting of the New Mexico Advisory Committee

    Science.gov (United States)

    2011-03-23

    .... Commission on Civil Rights (Commission), and the Federal Advisory Committee Act (FACA), that a planning... Regional Office at the above e-mail or street address. Deaf or hearing-impaired persons who will attend the...

  8. 76 FR 50453 - Agenda and Notice of Public Meeting of the New Hampshire State Advisory Committee

    Science.gov (United States)

    2011-08-15

    ... advisory committees. The purpose of the planning meeting is to discuss future activities. Members of the....usccr.gov , or to contact the Eastern Regional Office at the above e-mail or street address. Deaf or...

  9. Delivering the International Olympic Committee's mandate on Youth ...

    African Journals Online (AJOL)

    The International Olympic Committee (IOC) is currently planning the historic Youth Olympic Games (YOG), an international mul ti-sport event that will be inaugurated in Singapore in 2010. On the 6t h of July 2007, the establishment of the YOG was approved and will feature 14 to 18 year-old athletes. The purpose of the YOG ...

  10. 78 FR 9724 - Invasive Species Advisory Committee; Meetings

    Science.gov (United States)

    2013-02-11

    ..., on a broad array of issues related to preventing the introduction of invasive species and providing... outlined in the 2008-2012 National Invasive Species Management Plan. The meeting agenda is now available on... be no committee business conducted during the orientation session, which is closed to the public...

  11. 78 FR 41114 - NASA Advisory Council; Aeronautics Committee; Meeting

    Science.gov (United States)

    2013-07-09

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 13-075] NASA Advisory Council; Aeronautics... Aeronautics and Space Administration announces a meeting of the Aeronautics Committee of the NASA Advisory... planning. DATES: Tuesday, July 30, 2013, 9:00 a.m. to 5:00 p.m.; Local Time. ADDRESSES: NASA Headquarters...

  12. 77 FR 62312 - Debt Management Advisory Committee; Meeting

    Science.gov (United States)

    2012-10-12

    ... financial community prior to making its final decisions on major financing operations. Historically, this... committee under 5 U.S.C. App. 2, 3. Although the Treasury's final announcement of financing plans may not... of a statement of economic conditions and financing estimates. This briefing will give the press an...

  13. 77 FR 22390 - Debt Management Advisory Committee Meeting

    Science.gov (United States)

    2012-04-13

    ... financial community prior to making its final decisions on major financing operations. Historically, this... committee under 5 U.S.C. App. 2, 3. Although the Treasury's final announcement of financing plans may not... of a statement of economic conditions and financing estimates. This briefing will give the press an...

  14. Second meeting of the ITPA Coordinating Committee

    International Nuclear Information System (INIS)

    Campbell, D.J.; Shimada, M.

    2002-01-01

    The second meeting of the International Tokamak Physics Activity (ITPA) Coordinating Committee (CC), consisting of representatives from the ITPA participants and the topical physics group chairs and co-chairs was held at GA Technologies, San Diego, USA on 1-2 March 2002. The purpose of the meeting was to review the progress of physics R and D, especially in the high priority research ares, for burning plasma experiments including ITER, and to discuss the plans for pursuing necessary R and D. CC heard reports on the most recent developments in the areas of responsibility of the topical groups

  15. Electric Power Research Institute: Environmental Control Technology Center: Report to the Steering Committee, March 1996. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Operations and maintenance continued this month at the Electric Power Research Institute`s Environmental Control Technology Center. Testing on the 4.0 MW Pilot Wet FGD unit continued this month with the Carbon Injection System for the Hazardous Air Pollutant (HAP) test block. With this testing, the mercury measurement (Method 29) studies also continued with various impinger capture solutions. Also, the installation of the B&W/CHX Heat Exchanger unit was completed in March. The 4.0 MW Spray Dryer Absorber System (Carbon Injection System) and the 4.0 MW Pilot Wet FGD Unit and were utilized in the HAP test configuration this month. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit remained idle this month in a cold- standby mode. Monthly inspections were conducted for all equipment in cold-standby, as well as for the fire safety systems, and will continue to be conducted by the ECTC Operations and Maintenance staff.

  16. Electric Power Research Institute: Environmental Control Technology Center. Report to the Steering Committee, November 1995. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    Operations and maintenance continued this month at the Electric Power Research Institute`s Environmental Control Technology Center. Testing on the 4.0 MW Pilot Wet FGD unit continued this month with the Pilot High Velocity (PHV) and the Trace Element Removal (TER) test blocks. In the High Velocity test block, SO{sub 2} removal and mist eliminator carryover rates were investigated while operating the absorber unit with various spray nozzle types and vertical mist eliminator sections. During the Trace Element Removal test block, the mercury measurement studies involving the EPA Draft Method 29 continued with testing of several impinger solutions. The 4.0 MW Spray Dryer Absorber system was utilized in the TER test configuration this month while the 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit and the 0.4 MW Mini-Pilot Absorber unit remained in a state of cold-standby. A monthly inspection was conducted for all equipment in cold-standby, as well as for the fire safety systems in the SCR building. These inspections will continue to be conducted by the ECTC Operations and Maintenance staff each month.

  17. 76 FR 27998 - Public Meeting of the Steering Committee for the National Fish, Wildlife and Plants Climate...

    Science.gov (United States)

    2011-05-13

    ... effort will outline a unified approach to maintaining the key terrestrial, freshwater and marine... a diverse group of stakeholders, and facilitate coordination and communication across agencies and...

  18. Recommended techniques for effective maintainability. A continuous improvement initiative of the NASA Reliability and Maintainability Steering Committee

    Science.gov (United States)

    1994-01-01

    This manual presents a series of recommended techniques that can increase overall operational effectiveness of both flight and ground based NASA systems. It provides a set of tools that minimizes risk associated with: (1) restoring failed functions (both ground and flight based); (2) conducting complex and highly visible maintenance operations; and (3) sustaining a technical capability to support the NASA mission using aging equipment or facilities. It considers (1) program management - key elements of an effective maintainability effort; (2) design and development - techniques that have benefited previous programs; (3) analysis and test - quantitative and qualitative analysis processes and testing techniques; and (4) operations and operational design techniques that address NASA field experience. This document is a valuable resource for continuous improvement ideas in executing the systems development process in accordance with the NASA 'better, faster, smaller, and cheaper' goal without compromising safety.

  19. Business ethics in ethics committees?

    Science.gov (United States)

    Boyle, P

    1990-01-01

    The "Ethics committees" column in this issue of the Hastings Center Report features an introduction by Cynthia B. Cohen and four brief commentaries on the roles hospital ethics committees may play in the making of institutional and public health care policy in the 1990s. The pros and cons of a broader, more public role for ethics committees in reconciling the business and patient care aspects of health care delivery are debated by Cohen in "Ethics committees as corporate and public policy advocates," and by Philip Boyle in this article. Boyle is an associate for ethical studies at The Hastings Center.

  20. 75 FR 47302 - Notice of FERC Attendance at the Entergy Regional State Committee Meeting, Entergy ICT...

    Science.gov (United States)

    2010-08-05

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Notice of FERC Attendance at the Entergy Regional State Committee Meeting, Entergy ICT Tranmission Planning Summit and Entergy SPP RTO Planning... Orleans, 500 Canal Street, New Orleans, LA 70130, 504-525-2500. Entergy ICT Transmission Planning Summit...

  1. 76 FR 57950 - Agenda and Notice of Public Meeting of the New Hampshire Advisory Committee

    Science.gov (United States)

    2011-09-19

    .... Commission on Civil Rights (Commission), and the Federal Advisory Committee Act (FACA), that a planning.... on Thursday, September 29, 2011. The purpose of the planning meeting is to plan future activities... information may contact the Eastern Regional Office at (202) 376-7533. Deaf or hearing-impaired persons who...

  2. 76 FR 9742 - Agenda and Notice of Public Meeting of the New Jersey State Advisory Committee

    Science.gov (United States)

    2011-02-22

    .... Commission on Civil Rights and the Federal Advisory Committee Act (FACA), that briefing and planning meetings... of the planning meeting is to plan future activities. The purpose of the press conference is to... contact the ERO. See contact information below. Persons who are deaf or hearing-impaired who will attend...

  3. 76 FR 9742 - Agenda and Notice of Public Meeting of the Vermont Advisory Committee

    Science.gov (United States)

    2011-02-22

    ... Civil Rights (Commission), and the Federal Advisory Committee Act (FACA), that briefing and planning... of the planning meeting is to plan future activities. Members of the public are entitled to submit... below. Persons who are deaf or hearing-impaired who will attend the meetings and require the services of...

  4. 76 FR 16378 - Agenda and Notice of Public Meeting of the Vermont Advisory Committee

    Science.gov (United States)

    2011-03-23

    ... Civil Rights (Commission), and the Federal Advisory Committee Act (FACA), that briefing and planning... of the planning meeting is to plan future activities. Members of the public are entitled to submit... below. Persons who are deaf or hearing-impaired who will attend the meetings and require the services of...

  5. 76 FR 5160 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2011-01-28

    ... FEDERAL COMMUNICATIONS COMMISSION Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Committee on Diversity for Communications in the Digital Age (``Diversity Committee''). ADDRESSES: A copy of...

  6. 76 FR 64348 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2011-10-18

    ... FEDERAL COMMUNICATIONS COMMISSION Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Communications in the Digital Age (``Diversity Committee''). The Committee's mission is to provide...

  7. 77 FR 57085 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2012-09-17

    ... FEDERAL COMMUNICATIONS COMMISSION Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Communications in the Digital Age (``Diversity Committee''). The Committee's mission is to provide...

  8. 77 FR 6113 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2012-02-07

    ... FEDERAL COMMUNICATIONS COMMISSION Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Communications in the Digital Age (``Diversity Committee''). The Committee's mission is to provide...

  9. 78 FR 21354 - Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital...

    Science.gov (United States)

    2013-04-10

    ... FEDERAL COMMUNICATIONS COMMISSION Federal Advisory Committee Act; Advisory Committee on Diversity for Communications in the Digital Age AGENCY: Federal Communications Commission. ACTION: Notice of... Communications in the Digital Age (``Diversity Committee''). The Committee's mission is to provide...

  10. Australasian Gastrointestinal Trials Group (AGITG) Contouring Atlas and Planning Guidelines for Intensity-Modulated Radiotherapy in Anal Cancer

    International Nuclear Information System (INIS)

    Ng, Michael; Leong, Trevor; Chander, Sarat; Chu, Julie; Kneebone, Andrew; Carroll, Susan; Wiltshire, Kirsty; Ngan, Samuel; Kachnic, Lisa

    2012-01-01

    Purpose: To develop a high-resolution target volume atlas with intensity-modulated radiotherapy (IMRT) planning guidelines for the conformal treatment of anal cancer. Methods and Materials: A draft contouring atlas and planning guidelines for anal cancer IMRT were prepared at the Australasian Gastrointestinal Trials Group (AGITG) annual meeting in September 2010. An expert panel of radiation oncologists contoured an anal cancer case to generate discussion on recommendations regarding target definition for gross disease, elective nodal volumes, and organs at risk (OARs). Clinical target volume (CTV) and planning target volume (PTV) margins, dose fractionation, and other IMRT-specific issues were also addressed. A steering committee produced the final consensus guidelines. Results: Detailed contouring and planning guidelines and a high-resolution atlas are provided. Gross tumor and elective target volumes are described and pictorially depicted. All elective regions should be routinely contoured for all disease stages, with the possible exception of the inguinal and high pelvic nodes for select, early-stage T1N0. A 20-mm CTV margin for the primary, 10- to 20-mm CTV margin for involved nodes and a 7-mm CTV margin for the elective pelvic nodal groups are recommended, while respecting anatomical boundaries. A 5- to 10-mm PTV margin is suggested. When using a simultaneous integrated boost technique, a dose of 54 Gy in 30 fractions to gross disease and 45 Gy to elective nodes with chemotherapy is appropriate. Guidelines are provided for OAR delineation. Conclusion: These consensus planning guidelines and high-resolution atlas complement the existing Radiation Therapy Oncology Group (RTOG) elective nodal ano-rectal atlas and provide additional anatomic, clinical, and technical instructions to guide radiation oncologists in the planning and delivery of IMRT for anal cancer.

  11. Effect of chronological age of beef steers of different maturity types ...

    African Journals Online (AJOL)

    Effect of chronological age of beef steers of different maturity types on their growth ... and carcass studies have been conducted in the sourveld regions of the country. ... different beef maturity types which differ in body frame size were used, viz.

  12. Violation of Continuous-Variable Einstein-Podolsky-Rosen Steering with Discrete Measurements

    Science.gov (United States)

    Schneeloch, James; Dixon, P. Ben; Howland, Gregory A.; Broadbent, Curtis J.; Howell, John C.

    2013-03-01

    In this Letter, we derive an entropic Einstein-Podolsky-Rosen (EPR) steering inequality for continuous-variable systems using only experimentally measured discrete probability distributions and details of the measurement apparatus. We use this inequality to witness EPR steering between the positions and momenta of photon pairs generated in spontaneous parametric down-conversion. We examine the asymmetry between parties in this inequality, and show that this asymmetry can be used to reduce the technical requirements of experimental setups intended to demonstrate the EPR paradox. Furthermore, we develop a more stringent steering inequality that is symmetric between parties, and use it to show that the down-converted photon pairs also exhibit symmetric EPR steering.

  13. Effects of clay on fat necrosis and carcass characteristics in Japanese Black steers.

    Science.gov (United States)

    Oka, Akio; Iwamoto, Eiji; Tatsuda, Ken

    2015-10-01

    Twenty 10-month-old Japanese Black steers were used to evaluate the effects of clay on fat necrosis and carcass characteristics. Ten steers (Clay group) were fed the clay (50 g/day) during 10-30 months of age. The other 10 steers (Control group) were not fed it. There was no significant difference in body weight or average daily gain between the two groups (P > 0.05). The occurrence of fat necrotic mass in the Clay group (30%) was lower (P Clay group was smaller (P clay prevented the occurrence of fat necrosis and did not affect the carcass characteristics in Japanese Black steers. © 2015 Japanese Society of Animal Science.

  14. Ka-Band Electronically Steered CubeSat Antenna, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Kymeta Government Solutions (KGS) designed, analyzed, built, tested, and delivered a small, lightweight, low-cost, low-power electronically steered Ka-band prototype...

  15. Comparison of vibration damping of standard and PDCPD housing of the electric power steering system

    Science.gov (United States)

    Płaczek, M.; Wróbel, A.; Baier, A.

    2017-08-01

    A comparison of two different types of electric power steering system housing is presented. The first considered type of the housing was a standard one that is made of an aluminium alloy. The second one is made of polydicyclopentadiene polymer (PDCPD) and was produced using the RIM technology. Considered elements were analysed in order to verify their properties of vibrations damping. This property is very important taking into account noise generated by elements of a car’s power steering system. During the carried out tests vibrations of analysed power steering housings were measured using Marco Fiber Composite (MFC) piezoelectric transducers. Results obtained for both considered power steering housings in case of the same parameters of vibrations excitations were measured and juxtaposed. Obtained results were analysed in order to verify if the housing made of PDCPD polymer has better properties of vibration damping than the standard one.

  16. Steering a Course through Work and Life the Narratives of a ...

    African Journals Online (AJOL)

    Steering a Course through Work and Life the Narratives of a Zimbabwean Migrant ... Journal of Social Development in Africa ... of migrant life and the ways in which connections are continually forged and experience and agency enacted.

  17. Evaluation of four steering wheels to determine driver hand placement in a static environment.

    Science.gov (United States)

    Mossey, Mary E; Xi, Yubin; McConomy, Shayne K; Brooks, Johnell O; Rosopa, Patrick J; Venhovens, Paul J

    2014-07-01

    While much research exists on occupant packaging both proprietary and in the literature, more detailed research regarding user preferences for subjective ratings of steering wheel designs is sparse in published literature. This study aimed to explore the driver interactions with production steering wheels in four vehicles by using anthropometric data, driver hand placement, and driver grip design preferences for Generation-Y and Baby Boomers. In this study, participants selected their preferred grip diameter, responded to a series of questions about the steering wheel grip as they sat in four vehicles, and rank ordered their preferred grip design. Thirty-two male participants (16 Baby Boomers between ages 47 and 65 and 16 Generation-Y between ages 18 and 29) participated in the study. Drivers demonstrated different gripping behavior between vehicles and between groups. Recommendations for future work in steering wheel grip design and naturalistic driver hand positioning are discussed. Copyright © 2014. Published by Elsevier Ltd.

  18. National Status and Trends: Bioeffects Program - St. Thomas East End Reserves (STEER) Database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The purpose of this effort was to characterize the extent and magnitude of chemical contamination in the St. Thomas East End Reserves or STEER, as part of a larger...

  19. Demonstration of Einstein-Podolsky-Rosen steering with enhanced subchannel discrimination

    Science.gov (United States)

    Sun, Kai; Ye, Xiang-Jun; Xiao, Ya; Xu, Xiao-Ye; Wu, Yu-Chun; Xu, Jin-Shi; Chen, Jing-Ling; Li, Chuan-Feng; Guo, Guang-Can

    2018-03-01

    Einstein-Podolsky-Rosen (EPR) steering describes a quantum nonlocal phenomenon in which one party can nonlocally affect the other's state through local measurements. It reveals an additional concept of quantum non-locality, which stands between quantum entanglement and Bell nonlocality. Recently, a quantum information task named as subchannel discrimination (SD) provides a necessary and sufficient characterization of EPR steering. The success probability of SD using steerable states is higher than using any unsteerable states, even when they are entangled. However, the detailed construction of such subchannels and the experimental realization of the corresponding task are still technologically challenging. In this work, we designed a feasible collection of subchannels for a quantum channel and experimentally demonstrated the corresponding SD task where the probabilities of correct discrimination are clearly enhanced by exploiting steerable states. Our results provide a concrete example to operationally demonstrate EPR steering and shine a new light on the potential application of EPR steering.

  20. Fault Risk Assessment of Underwater Vehicle Steering System Based on Virtual Prototyping and Monte Carlo Simulation

    Directory of Open Access Journals (Sweden)

    He Deyu

    2016-09-01

    Full Text Available Assessing the risks of steering system faults in underwater vehicles is a human-machine-environment (HME systematic safety field that studies faults in the steering system itself, the driver’s human reliability (HR and various environmental conditions. This paper proposed a fault risk assessment method for an underwater vehicle steering system based on virtual prototyping and Monte Carlo simulation. A virtual steering system prototype was established and validated to rectify a lack of historic fault data. Fault injection and simulation were conducted to acquire fault simulation data. A Monte Carlo simulation was adopted that integrated randomness due to the human operator and environment. Randomness and uncertainty of the human, machine and environment were integrated in the method to obtain a probabilistic risk indicator. To verify the proposed method, a case of stuck rudder fault (SRF risk assessment was studied. This method may provide a novel solution for fault risk assessment of a vehicle or other general HME system.