NodHex3D: An application for solving the neutron diffusion equations in hexagonal-Z geometry and steady state

International Nuclear Information System (INIS)

Esquivel E, J.; Del Valle G, E.

2014-10-01

The system called NodHex3D is a graphical application that allows the solution of the neutron diffusion equation. The system considers fuel assemblies of hexagonal cross section. This application arose from the idea of expanding the development of neutron own codes, used primarily for academic purposes. The advantage associated with the use of NodHex3D, is that the kernel configuration and fuel batches is dynamically without affecting directly the base source code of the solution of the neutron diffusion equation. In addition to the kernel configuration to use, specify the values for the cross sections for each batch of fuel used, these values are: diffusion coefficient, removal cross section, absorption cross section, fission cross section and dispersion cross section. Important also, considering that the system is able to perform calculations for various energy groups. As evidence of the operation of NodHex3D, was proposed to model three-dimensional core of a nuclear reactor VVER-1000, based on the reference problem AER-FCM-101. The configuration of the reactor core consists of fuel assemblies (25 batches), composed of seven distinct materials, one of which reflector material, vacuum boundary conditions on the surface delimiting the reactor core. The diffusion equation for two energy groups solves, obtaining the value of the effective neutron multiplication factor. The obtained results are compared to those documented in the reference problem and by 3-DNT codes. (Author)

Evaluation of ACE gene I/D polymorphism in Iranian elite athletes.

Science.gov (United States)

Shahmoradi, Somayeh; Ahmadalipour, Ali; Salehi, Mansoor

2014-01-01

Angiotensin converting enzyme (ACE) is an important gene, which is associated with the successful physical activity. The ACE gene has a major polymorphism (I/D) in intron 16 that determines its plasma and tissue levels. In this study, we aimed to determine whether there is an association between this polymorphism and sports performance in our studied population including elite athletes of different sports disciplines. We investigated allele frequency and genotype distribution of the ACE gene in 156 Iranian elite athletes compared to 163 healthy individuals. We also investigated this allele frequency between elite athletes in three functional groups of endurance, power, and mixed sports performances. DNA was extracted from peripheral blood, and polymerase chain reaction (PCR) method was performed on intron 16 of the ACE gene. The ACE genotype was determined for each subject. Statistical analysis was performed by SPSS 15, and results were analyzed by Chi-Square test. There was a significant difference in genotype distribution and allele frequency of the ACE gene in athletes and control group (P = 0.05, P = 0.03, respectively). There was also a significant difference in allele frequency of the ACE gene in 3 groups of athletes with different sports disciplines (P = 0.045). Proportion of the ACE gene D allele was greater in elite endurance athletes (37 high-distance cyclists) than two other groups. Findings of the present study demonstrated that there is an association between the ACE gene I/D polymorphism and sports performance in Iranian elite athletes.

ACE I/D genotype, adiposity, and blood pressure in children

Directory of Open Access Journals (Sweden)

Rothschild Max

2009-03-01

Full Text Available Abstract Background Angiotensin converting enzyme (ACE is a possible candidate gene that may influence both body fatness and blood pressure. Although several genetic studies have been conducted in adults, relatively few studies have examined the contribution of potential candidate genes, and specifically ACE I/D, on adiposity and BP phenotypes in childhood. Such studies may prove insightful for the development of the obesity-hypertension phenotype early in life. The purpose of this study was to examine differences in body fatness and resting blood pressure (BP by ACE I/D genotype, and determine if the association between adiposity and BP varies by ACE I/D genotype in children. Methods 152 children (75 girls, 77 boys were assessed for body composition (% body fat using dual energy x-ray absorbtiometry and resting BP according to American Heart Association recommendations. Buccal cell samples were genotyped using newly developed PCR-RFLP tests for two SNPs (rs4341 and rs4343 in complete linkage disequilibrium with the ACE I/D polymorphism. Partial correlations were computed to assess the ociations between % body fat and BP in the total sample and by genotype. ANCOVA was used to examine differences in resting BP by ACE I/D genotype and fatness groups. Results Approximately 39% of youth were overfat based on % body fat (>30% fat in girls, 25% fat in boys. Body mass, body mass index, and fat-free mass were significantly higher in the ACE D-carriers compared to the II group (p Conclusion ACE D-carriers are heavier than ACE II children; however, BP did not differ by ACE I/D genotype but was adversely influenced in the overfat D-carriers. Further studies are warranted to investigate the genetics of fatness and BP phenotypes in children.

IBIS, FBR 3-D Steady-State and Kinetics with Thermohydraulic Feedback

International Nuclear Information System (INIS)

Konomura, Mamoru; Tada, Nobuo; Oka, Yoshiaki; An, Shigehiro

1987-01-01

1 - Description of program or function: The IBIS code performs steady state and kinetics calculations based on a three-dimensional nuclear diffusion kinetics with thermal hydraulic feedback. It can calculate the following values in hexagonal-Z geometry of a fast breeder reactor core through the progress of transient: (1) Net reactivity; (2) Total and group-wise delayed neutron fraction; (3) Group-wise delayed neutron precursor concentration; (4) Total power and energy; (5) Space dependent neutron flux in each energy group; (6) Space dependent temperature of each material; (7) Maximum temperature of each material and its location. 2 - Method of solution: The quasi-static method is adopted to solve the three-dimensional nuclear diffusion kinetics problem. The method is the same as employed in the code QX1. The shape function equation is solved with the finite difference treatment as used in the codes CITATION and HONEYCOMB. One-dimensional thermo-hydraulics is solved with a model similar to that given in the code SASLA. Sodium boiling can be taken into account. 3 - Restrictions on the complexity of the problem: The number of neutron energy groups is fixed to 3 groups in the present version of the code

Identification and characterisation of the angiotensin converting enzyme-3 (ACE3 gene: a novel mammalian homologue of ACE

Directory of Open Access Journals (Sweden)

Phelan Anne

2007-06-01

Full Text Available Abstract Background Mammalian angiotensin converting enzyme (ACE plays a key role in blood pressure regulation. Although multiple ACE-like proteins exist in non-mammalian organisms, to date only one other ACE homologue, ACE2, has been identified in mammals. Results Here we report the identification and characterisation of the gene encoding a third homologue of ACE, termed ACE3, in several mammalian genomes. The ACE3 gene is located on the same chromosome downstream of the ACE gene. Multiple sequence alignment and molecular modelling have been employed to characterise the predicted ACE3 protein. In mouse, rat, cow and dog, the predicted protein has mutations in some of the critical residues involved in catalysis, including the catalytic Glu in the HEXXH zinc binding motif which is Gln, and ESTs or reverse-transcription PCR indicate that the gene is expressed. In humans, the predicted ACE3 protein has an intact HEXXH motif, but there are other deletions and insertions in the gene and no ESTs have been identified. Conclusion In the genomes of several mammalian species there is a gene that encodes a novel, single domain ACE-like protein, ACE3. In mouse, rat, cow and dog ACE3, the catalytic Glu is replaced by Gln in the putative zinc binding motif, indicating that in these species ACE3 would lack catalytic activity as a zinc metalloprotease. In humans, no evidence was found that the ACE3 gene is expressed and the presence of deletions and insertions in the sequence indicate that ACE3 is a pseudogene.

VARI-QUIR-3, 2-D Multigroup Steady-State Neutron Diffusion in X-Y R-Z or R-Theta Geometry

International Nuclear Information System (INIS)

Collier, George

1984-01-01

1 - Nature of physical problem solved: The steady-state, multigroup, two-dimensional neutron diffusion equations are solved in x-y, r-z, and r-theta geometry. 2 - Method of solution: A Gauss-Seidel type of solution with inner and outer iterations is used. The source is held constant during the inner iterations

Identification and characterisation of the angiotensin converting enzyme-3 (ACE3) gene: a novel mammalian homologue of ACE

OpenAIRE

Rella, Monika; Elliot, Joann L; Revett, Timothy J; Lanfear, Jerry; Phelan, Anne; Jackson, Richard M; Turner, Anthony J; Hooper, Nigel M

2007-01-01

Abstract Background Mammalian angiotensin converting enzyme (ACE) plays a key role in blood pressure regulation. Although multiple ACE-like proteins exist in non-mammalian organisms, to date only one other ACE homologue, ACE2, has been identified in mammals. Results Here we report the identification and characterisation of the gene encoding a third homologue of ACE, termed ACE3, in several mammalian genomes. The ACE3 gene is located on the same chromosome downstream of the ACE gene. Multiple ...

Fundamentals of 3-D Neutron Kinetics and Current Status

International Nuclear Information System (INIS)

Aragones, J.M.

2008-01-01

This lecture includes the following topics: 1) A summary of the cell and lattice calculations used to generate the neutron reaction data for neutron kinetics, including the spectral and burnup calculations of LWR cells and fuel assembly lattices, and the main nodal kinetics parameters: mean neutron generation time and delayed neutron fraction; 2) the features of the advanced nodal methods for 3-D LWR core physics, including the treatment of partially inserted control rods, fuel assembly grids, fuel burnup and xenon and samarium transients, and excore detector responses, that are essential for core surveillance, axial offset control and operating transient analysis; 3) the advanced nodal methods for 3-D LWR core neutron kinetics (best estimate safety analysis, real-time simulation); and 4) example applications to 3-D neutron kinetics problems in transient analysis of PWR cores, including model, benchmark and operational transients without, or with simple, thermal-hydraulics feedback.

Coupling of the computational fluid dynamics code ANSYS CFX with the 3D neutron kinetic core model DYN3D

International Nuclear Information System (INIS)

Kliem, S.; Grahn, A.; Rohde, U.; Schuetze, J.; Frank, Th.

2010-01-01

The computational fluid dynamics code ANSYS CFX has been coupled with the neutron-kinetic core model DYN3D. ANSYS CFX calculates the fluid dynamics and related transport phenomena in the reactors coolant and provides the corresponding data to DYN3D. In the fluid flow simulation of the coolant, the core itself is modeled within the porous body approach. DYN3D calculates the neutron kinetics and the fuel behavior including the heat transfer to the coolant. The physical data interface between the codes is the volumetric heat release rate into the coolant. In the prototype that is currently available, the coupling is restricted to single-phase flow problems. In the time domain an explicit coupling of the codes has been implemented so far. Steady-state and transient verification calculations for two small-size test problems confirm the correctness of the implementation of the prototype coupling. The first test problem was a mini-core consisting of nine real-size fuel assemblies with quadratic cross section. Comparison was performed with the DYN3D stand-alone code. In the steady state, the effective multiplication factor obtained by the DYN3D/ANSYS CFX codes hows a deviation of 9.8 pcm from the DYN3D stand-alone solution. This difference can be attributed to the use of different water property packages in the two codes. The transient test case simulated the withdrawal of the control rod from the central fuel assembly at hot zero power in the same mini-core. Power increase during the introduction of positive reactivity and power reduction due to fuel temperature increase are calculated in the same manner by the coupled and the stand-alone codes. The maximum values reached during the power rise differ by about 1 MW at a power level of 50 MW. Beside the different water property packages, these differences are caused by the use of different flow solvers. The same calculations were carried for a mini-core with seven real-size fuel assemblies with hexagonal cross section in

Aerosols, Chemistry, and Radiative Forcing: A 3-D Model Analysis of Satellite and ACE-Asia data (ACMAP)

Science.gov (United States)

Chin, Mian; Ginoux, Paul; Torres, Omar; Zhao, Xue-Peng

2005-01-01

We propose a research project to incorporate a global 3-D model and satellite data into the multi-national Aerosol Characterization Experiment-Asia (ACE-Asia) mission. Our objectives are (1) to understand the physical, chemical, and optical properties of aerosols and the processes that control those properties over the Asian-Pacific region, (2) to investigate the interaction between aerosols and tropospheric chemistry, and (3) to determine the aerosol radiative forcing over the Asia-Pacific region. We will use the Georgia TecWGoddard Global Ozone Chemistry Aerosol Radiation and Transport (GOCART) model to link satellite observations and the ACE-Asia measurements. First, we will use the GOCART model to simulate aerosols and related species, and evaluate the model with satellite and in-situ observations. Second, the model generated aerosol vertical profiles and compositions will be used to validate the satellite products; and the satellite data will be used for during- and post- mission analysis. Third, we will use the model to analyze and interpret both satellite and ACE- Asia field campaign data and investigate the aerosol-chemistry interactions. Finally, we will calculate aerosol radiative forcing over the Asian-Pacific region, and assess the influence of Asian pollution in the global atmosphere. We propose a research project to incorporate a global 3-D model and satellite data into

Development of High Intensity D-T fusion NEutron Generator (HINEG)

Science.gov (United States)

Wu, Yican; Liu, Chao; Song, Gang; Wang, Yongfeng; Li, Taosheng; Jiang, Jieqiong; Song, Yong; Ji, Xiang

2017-09-01

A high intensity D-T fusion neutron generator (HINEG) is keenly needed for the research and development (R&D) of nuclear technology and safety of the advanced nuclear energy system, especially for the radiation protection and shielding. The R&D of HINEG includes two phases: HINEG-I and HINEG-II. HINEG-I is designed to have both the steady beam and pulsed beam. The neutron yield of the steady beam is up to 1012 n/s. The width of pulse neutron beam is less than 1.5 ns. HINEG-I is used for the basic neutronics study, such as measurement of nuclear data, validation of neutronics methods and software, validation of radiation protection and so on. HINEG-II aims to generate a high neutron yield of 1013 n/s neutrons by adopting high speed rotating tritium target system integrated with jet/spray array enhanced cooling techniques, and can further upgrade to obtain neutron yield of 1014 1015n/s by using of accelerators-array in a later stage. HINEG-II can be used for fundamentals research of nuclear technology including mechanism of materials radiation damage and neutronics performance of components, radiation shielding as well as other nuclear technology applications.

[Association of I/D and -786 Polymorphisms of ACE and NOS3 Genes With Features of the Course of Ischemic Heart Disease and Diabetes Mellitus Type 2].

Science.gov (United States)

Afanasiev, S A; Muslimova, E F; Rebrov, T Y; Sergienko, T N; Repin, A N

2016-09-01

to study relationship of ACE insertion-deletion (I/D) polymorphism and NOS3 T-786C polymorphism with characteristics of the course of ischemic heart disease (IHD) at the background of diabetes mellitus. Were examined 114 patients with IHD, 29.8% of patients had type 2 diabetes mellitus. ACE and NOS3 polymorphisms were determined by allele-specific polymerase chain reaction with primers by "Lytech". Patients with combined pathology belonged to older age group, had increased frequency of obesity and predominance of functional class II chronic heart failure. In this group we detected association of D allele of the ACE gene with higher frequency of dyslipidemia and obesity. Among patients with IHD without diabetes we observed associations of ACE I/D and NOS3 T-786C polymorphisms (close and moderate, respectively) with severity of effort angina. We also found that frequency of dyslipidemia among carriers of II and TT genotypes was lower than among carriers of other genotypes. Presence of type 2 diabetes as background pathology leads to a change of character of association of ACE I/D and NOS3 T-786C polymorphisms with clinical characteristics of patients with IHD.

Steady state HTTR model in the RELAP5-3D

Energy Technology Data Exchange (ETDEWEB)

Scari, Maria E.; Reis, Patrícia A. L.; Costa, Antonella L.; Pereira, Claubia; Veloso, Maria A. F., E-mail: melizabethscari@yahoo.com, E-mail: patricialire@yahoo.com.br, E-mail: antonella@nuclear.ufmg.br, E-mail: claubia@nuclear.ufmg.br, E-mail: dora@nuclear.ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear; Instituto Nacional de Ciências e Tecnologia de Reatores Nucleares Inovadores/CNPQ (Brazil)

2017-07-01

The HTTR (High Temperature Engineering Test Reactor) is a high temperature gas-cooled reactor (HTGR). It is a helium-cooled and graphite-moderated with a thermal power of 30 MW, developed and operated by the Japan Atomic Energy Research Institute (JAERI). In a previous work, a thermal model for the HTTR has been developed using the RELAP5-3D code. In the present work, additional thermal analyses have been presented. Studies about the core neutronic simulation were also initiated and are described here. The code WIMSD-5B was used to generate the cross sections and the group constants necessary to the NESTLE neutron kinetic code incorporated in the RELAP5-3D. (author)

The evaluation of angiotensin-converting enzyme (ACE) gene I/D and IL-4 gene intron 3 VNTR polymorphisms in coronary artery disease.

Science.gov (United States)

Basol, Nursah; Celik, Atac; Karakus, Nevin; Ozturk, Sibel Demir; Ozsoy, Sibel Demir; Yigit, Serbulent

2014-01-01

Genetic polymorphism is a strong risk factor for coronary artery disease (CAD). In the present study, our aim was to evaluate angiotensin-converting enzyme (ACE) gene I/D polymorphism and interleukin-4 (IL-4) gene Intron 3 variable number of tandem repeat (VNTR) polymorphism in CAD. One hundred and twenty-four CAD patients and one hundred and twenty-three controls were enrolled. Genomic DNA was isolated and genotyped using polymerase chain reaction (PCR) analyses. The risk associated with inheriting the combined genotypes for the two polymorphisms were evaluated and it was found that the individuals who were P2P2-homozygous at IL-4 gene intron 3 VNTR and DD-homozygous at ACE gene I/D have a higher risk of developing CAD. Although, there is no correlation between IL4 VNTR polymorphism and ACE gene polymorphism and CAD, there is a strong association between CAD and co-existence of IL-4 VNTR and ACE gene polymorphisms in the Turkish population. Copyright © 2014 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

Development of High Intensity D-T fusion NEutron Generator (HINEG

Directory of Open Access Journals (Sweden)

Wu Yican

2017-01-01

Full Text Available A high intensity D-T fusion neutron generator (HINEG is keenly needed for the research and development (R&D of nuclear technology and safety of the advanced nuclear energy system, especially for the radiation protection and shielding. The R&D of HINEG includes two phases: HINEG-I and HINEG-II. HINEG-I is designed to have both the steady beam and pulsed beam. The neutron yield of the steady beam is up to 1012 n/s. The width of pulse neutron beam is less than 1.5 ns. HINEG-I is used for the basic neutronics study, such as measurement of nuclear data, validation of neutronics methods and software, validation of radiation protection and so on. HINEG-II aims to generate a high neutron yield of 1013 n/s neutrons by adopting high speed rotating tritium target system integrated with jet/spray array enhanced cooling techniques, and can further upgrade to obtain neutron yield of 1014~1015n/s by using of accelerators-array in a later stage. HINEG-II can be used for fundamentals research of nuclear technology including mechanism of materials radiation damage and neutronics performance of components, radiation shielding as well as other nuclear technology applications.

Characterization of the relationship between APOBEC3B deletion and ACE Alu insertion.

Directory of Open Access Journals (Sweden)

Kang Wang

Full Text Available The insertion/deletion (I/D polymorphism of the angiotensin converting enzyme (ACE, commonly associated with many diseases, is believed to have affected human adaptation to environmental changes during the out-of-Africa expansion. APOBEC3B (A3B, a member of the cytidine deaminase family APOBEC3s, also exhibits a variable gene insertion/deletion polymorphism across world populations. Using data available from published reports, we examined the global geographic distribution of ACE and A3B genotypes. In tracking the modern human dispersal routes of these two genes, we found that the variation trends of the two I/D polymorphisms were directly correlated. We observed that the frequencies of ACE insertion and A3B deletion rose in parallel along the expansion route. To investigate the presence of a correlation between the two polymorphisms and the effect of their interaction on human health, we analyzed 1199 unrelated Chinese adults to determine their genotypes and other important clinical characteristics. We discovered a significant difference between the ACE genotype/allele distribution in the A3B DD and A3B II/ID groups (P = 0.045 and 0.015, respectively, indicating that the ACE Alu I allele frequency in the former group was higher than in the latter group. No specific clinical phenotype could be associated with the interaction between the ACE and A3B I/D polymorphisms. A3B has been identified as a powerful inhibitor of Alu retrotransposition, and primate A3 genes have undergone strong positive selection (and expansion for restricting the mobility of endogenous retrotransposons during evolution. Based on these findings, we suggest that the ACE Alu insertion was enabled (facilitated by the A3B deletion and that functional loss of A3B provided an opportunity for enhanced human adaptability and survival in response to the environmental and climate challenges arising during the migration from Africa.

Use of MCAM in creating 3D neutronics model for ITER building

International Nuclear Information System (INIS)

Zeng Qin; Wang Guozhong; Dang Tongqiang; Long Pengcheng; Loughlin, Michael

2012-01-01

Highlights: ► We created a 3D neutronics model of the ITER building. ► The model was produced from the engineering CAD model by MCAM software. ► The neutron flux map in the ITER building was calculated. - Abstract: The three dimensional (3D) neutronics reference model of International Thermonuclear Experimental Reactor (ITER) only defines the tokamak machine and extends to the bio-shield. In order to meet further 3D neutronics analysis needs, it is necessary to create a 3D reference model of the ITER building. Monte Carlo Automatic Modeling Program for Radiation Transport Simulation (MCAM) was developed as a computer aided design (CAD) based bi-directional interface program between general CAD systems and Monte Carlo radiation transport simulation codes. With the help of MCAM version 4.8, the 3D neutronics model of ITER building was created based on the engineering CAD model. The calculation of the neutron flux map in ITER building during operation showed the correctness and usability of the model. This model is the first detailed ITER building 3D neutronics model and it will be made available to all international organization collaborators as a reference model.

Investigation on the neutron beam characteristics for boron neutron capture therapy with 3D and 2D transport calculations

International Nuclear Information System (INIS)

Kodeli, I.; Diop, C.M.; Nimal, J.C.

1994-01-01

In the framework of future Boron Neutron Capture Therapy (BNCT) experiments, where cells and animals irradiations are planned at the research reactor of Strasbourg University, the feasibility to obtain a suitable epithermal neutron beam is investigated. The neutron fluence and spectra calculations in the reactor are performed using the 3D Monte Carlo code TRIPOLI-3 and the 2D SN code TWODANT. The preliminary analysis of Al 2 O 3 and Al-Al 2 O 3 filters configurations are carried out in an attempt to optimize the flux characteristics in the beam tube facility. 7 figs., 7 refs

Associations of ACE Gene Insertion/Deletion Polymorphism, ACE Activity, and ACE mRNA Expression with Hypertension in a Chinese Population

Science.gov (United States)

He, Qingfang; Fan, Chunhong; Yu, Min; Wallar, Gina; Zhang, Zuo-Feng; Wang, Lixin; Zhang, Xinwei; Hu, Ruying

2013-01-01

Background The present study was designed to explore the association of angiotensin converting enzyme (ACE) gene insertion/deletion (I/D, rs4646994) polymorphism, plasma ACE activity, and circulating ACE mRNA expression with essential hypertension (EH) in a Chinese population. In addition, a new detection method for circulating ACE mRNA expression was explored. Methods The research was approved by the ethics committee of Zhejiang Provincial Center for Disease Prevention and Control. Written informed consent was obtained prior to the investigation. 221 hypertensives (cases) and 221 normotensives (controls) were interviewed, subjected to a physical examination, and provided blood for biochemical and genetic tests. The ACE mRNA expression was analyzed by real time fluorescent quantitative Reverse Transcription PCR (FQ-RT-PCR). We performed logistic regression to assess associations of ACE I/D genotypes, ACE activity, and ACE mRNA expression levels with hypertension. Results The results of the multivariate logistic regression analysis showed that the additive model (ID, DD versus II) of the ACE genotype revealed an association with hypertension with adjusted OR of 1.43(95% CI: 1.04-1.97), and ACE ID genotype with adjusted OR of 1.72(95% CI: 1.01-2.92), DD genotype with adjusted OR of 1.94(95% CI: 1.01-3.73), respectively. In addition, our data also indicate that plasma ACE activity (adjusted OR was 1.13(95% CI: 1.08-1.18)) was significantly related to hypertension. However, the plasma ACE mRNA expressions were not different between the cases and controls. Conclusion ACE I/D polymorphism and ACE activity revealed significant influence on hypertension, while circulating ACE mRNA expression was not important factors associated with hypertension in this Chinese population. The detection of circulating ACE mRNA expression by FQ-RT-PCR might be a useful method for early screening and monitoring of EH. PMID:24098401

Expression and evolutionary analyses of three acetylcholinesterase genes (Mi-ace-1, Mi-ace-2, Mi-ace-3) in the root-knot nematode Meloidogyne incognita.

Science.gov (United States)

Cui, Ruqiang; Zhang, Lei; Chen, Yuyan; Huang, Wenkun; Fan, Chengming; Wu, Qingsong; Peng, Deliang; da Silva, Washington; Sun, Xiaotang

2017-05-01

The full cDNA of Mi-ace-3 encoding an acetylcholinesterase (AChE) in Meloidogyne incognita was cloned and characterized. Mi-ace-3 had an open reading frame of 1875 bp encoding 624 amino acid residues. Key residues essential to AChE structure and function were conserved. The deduced Mi-ACE-3 protein sequence had 72% amino acid similarity with that of Ditylenchus destructor Dd-AChE-3. Phylogenetic analyses using 41 AChEs from 24 species showed that Mi-ACE-3 formed a cluster with 4 other nematode AChEs. Our results revealed that the Mi-ace-3 cloned in this study, which is orthologous to Caenorhabditis elegans AChE, belongs to the nematode ACE-3/4 subgroup. There was a significant reduction in the number of galls in transgenic tobacco roots when Mi-ace-1, Mi-ace-2, and Mi-ace-3 were knocked down simultaneously, whereas little or no effect were observed when only one or two of these genes were knocked down. This is an indication that the functions of these three genes are redundant. Copyright © 2017. Published by Elsevier Inc.

Angiotensin converting enzyme (ACE D/I) polymorphism and its ...

African Journals Online (AJOL)

Hepatitis C virus (HCV) infection is a global health problem in Egypt and causes different liver disease spectrum. Evidence indicates that angiotensin I converting enzyme (ACE) gene polymorphism may play a role in determining disease progression. We aimed to determine the association of ACE gene I/D polymorphism ...

Use of MCAM in creating 3D neutronics model for ITER building

Energy Technology Data Exchange (ETDEWEB)

Zeng Qin [Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, Anhui 230027 (China); Wang Guozhong, E-mail: mango33@mail.ustc.edu.cn [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, Anhui 230027 (China); Dang Tongqiang [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, Anhui 230027 (China); Long Pengcheng [Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, Anhui 230027 (China); Loughlin, Michael [ITER Organization, Route de Vinon sur Verdon, 13115 St. Paul-Lz-Durance (France)

2012-08-15

Highlights: Black-Right-Pointing-Pointer We created a 3D neutronics model of the ITER building. Black-Right-Pointing-Pointer The model was produced from the engineering CAD model by MCAM software. Black-Right-Pointing-Pointer The neutron flux map in the ITER building was calculated. - Abstract: The three dimensional (3D) neutronics reference model of International Thermonuclear Experimental Reactor (ITER) only defines the tokamak machine and extends to the bio-shield. In order to meet further 3D neutronics analysis needs, it is necessary to create a 3D reference model of the ITER building. Monte Carlo Automatic Modeling Program for Radiation Transport Simulation (MCAM) was developed as a computer aided design (CAD) based bi-directional interface program between general CAD systems and Monte Carlo radiation transport simulation codes. With the help of MCAM version 4.8, the 3D neutronics model of ITER building was created based on the engineering CAD model. The calculation of the neutron flux map in ITER building during operation showed the correctness and usability of the model. This model is the first detailed ITER building 3D neutronics model and it will be made available to all international organization collaborators as a reference model.

Interface requirements to couple thermal-hydraulic codes to 3D neutronic codes

Energy Technology Data Exchange (ETDEWEB)

Langenbuch, S.; Austregesilo, H.; Velkov, K. [GRS, Garching (Germany)] [and others

1997-07-01

The present situation of thermalhydraulics codes and 3D neutronics codes is briefly described and general considerations for coupling of these codes are discussed. Two different basic approaches of coupling are identified and their relative advantages and disadvantages are discussed. The implementation of the coupling for 3D neutronics codes in the system ATHLET is presented. Meanwhile, this interface is used for coupling three different 3D neutronics codes.

Interface requirements to couple thermal-hydraulic codes to 3D neutronic codes

International Nuclear Information System (INIS)

Langenbuch, S.; Austregesilo, H.; Velkov, K.

1997-01-01

The present situation of thermalhydraulics codes and 3D neutronics codes is briefly described and general considerations for coupling of these codes are discussed. Two different basic approaches of coupling are identified and their relative advantages and disadvantages are discussed. The implementation of the coupling for 3D neutronics codes in the system ATHLET is presented. Meanwhile, this interface is used for coupling three different 3D neutronics codes

NodHex3D: An application for solving the neutron diffusion equations in hexagonal-Z geometry and steady state; NodHex3D: Una aplicacion para solucionar las ecuaciones de difusion de neutrones en geometria hexagonal-Z y estado estacionario

Energy Technology Data Exchange (ETDEWEB)

Esquivel E, J. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Del Valle G, E., E-mail: jaime.esquivel@inin.gob.mx [IPN, Escuela Superior de Fisica y Matematicas, Av. IPN s/n, Edificio 9, Col. San Pedro Zacatenco, 07738 Mexico D. F. (Mexico)

2014-10-15

The system called NodHex3D is a graphical application that allows the solution of the neutron diffusion equation. The system considers fuel assemblies of hexagonal cross section. This application arose from the idea of expanding the development of neutron own codes, used primarily for academic purposes. The advantage associated with the use of NodHex3D, is that the kernel configuration and fuel batches is dynamically without affecting directly the base source code of the solution of the neutron diffusion equation. In addition to the kernel configuration to use, specify the values for the cross sections for each batch of fuel used, these values are: diffusion coefficient, removal cross section, absorption cross section, fission cross section and dispersion cross section. Important also, considering that the system is able to perform calculations for various energy groups. As evidence of the operation of NodHex3D, was proposed to model three-dimensional core of a nuclear reactor VVER-1000, based on the reference problem AER-FCM-101. The configuration of the reactor core consists of fuel assemblies (25 batches), composed of seven distinct materials, one of which reflector material, vacuum boundary conditions on the surface delimiting the reactor core. The diffusion equation for two energy groups solves, obtaining the value of the effective neutron multiplication factor. The obtained results are compared to those documented in the reference problem and by 3-DNT codes. (Author)

ASSOCIATION OF ACTN3 R577X AND ACE I/D POLYMORPHISMS IN BRAZILIANS WRESTLERS

OpenAIRE

Ribas, Marcelo Romanovitch; Oliveira Netto, Zair Candido; Salgueirosa, Fabiano; Fernandes, Priscila; Matos, Oslei de; Bassan, Julio Cesar

2017-01-01

ABSTRACT Introduction: By associating genetics and sport, it is possible to identify subjects with greater capacity to adapt to training, and lower chances of injury. Objective: The investigation evaluated the genotypic and allelic distribution of ACTN3 R577X and ACE I/D polymorphisms in Brazilian high-performance athletes in wrestling and percussion combat sports. Methods: The study included 37 male athletes ranked from first to third place in world scenarios, divided into two groups: wrestl...

Designing an Epithermal Neutron Beam for Boron Neutron Capture Therapy for the Fusion Reactions 2H(d,n)3He and 3H(d,n)4He1

International Nuclear Information System (INIS)

Verbeke, J.M.; Costes, S.V.; Bleuel, D.; Vujic, J.; Leung, K.N.

1998-01-01

A beam shaping assembly has been designed to moderate high energy neutrons from the fusion reactions 2 H(d,N) 3 He and 3 H(d,n) 4 He for use fin boron neutron capture therapy. The low neutron yield of the 2 H(d,n) 3 He reaction led to unacceptably long treatment times. However, a 160 mA deuteron beam of energy 400 keV led to a treatment time of 120 minutes with the reaction 3 H(d,n) 4 He. Equivalent doses of 9.6 Gy-Eq and 21.9 Gy-Eq to the skin and to a 8 cm deep tumor respectively have been computed

Assessment of the relationship between ACE I/D gene polymorphism and renal allograft survival.

Science.gov (United States)

Yang, Chun-Hua; Lu, Yi; Chen, Xue-Xia; Xian, Wen-Feng; Tu, Wei-Feng; Li, Hong-Yan

2015-12-01

The relationship between the angiotensin-converting enzyme (ACE) insertion/deletion (I/D) gene polymorphism and renal allograft survival after renal transplantation from the published reports are still debatable. This study was performed to evaluate the relationship between the ACE I/D gene polymorphism and renal allograft survival after renal transplantation using meta-analysis. Eligible studies were identified from PubMed and Cochrane Library on 1 November 2014, and eligible studies were recruited and synthesized using a meta-analysis methodology. Twelve investigations were included in this meta-analysis for the assessment of the relationship between the ACE I/D gene polymorphism and renal allograft survival. In this meta-analysis, the ACE I/D gene polymorphism was not associated with renal allograft survival after renal transplantation for overall populations, Caucasians, Brazilians and Africans. Interestingly, the ACE D allele and DD genotype were associated with renal allograft survival after renal transplantation in the Asian population. ACE D allele and DD genotype were associated with renal allograft survival after renal transplantation in the Asian population. However, more studies should be performed to confirm this association. © The Author(s) 2015.

Relationship between major depressive disorder and ACE gene I/D polymorphism in a Turkish population

Directory of Open Access Journals (Sweden)

Sema Inanir

2016-04-01

Full Text Available Abstract Background Major depressive disorder (MDD is a complex disease and a significant health problem that is prevalent across the world. Angiotensin-converting enzyme (ACE has an important role in renin-angiotensin system (RAS and converts inactive angiotensin I to a potent vasopressor and aldosterone-stimulating peptide angiotensin II. Levels of ACE in plasma vary according to the insertion/deletion (I/D polymorphism of ACE gene. Objective The aim of the current study was to examine the influence ACE gene I/D variations on the risk of MDD. Methods In the present case-control study, we analyzed ACE I/D polymorphism in 346 MDD patients and 210 healthy subjects using polymerase chain reaction technique. Results Comparing the two groups, no significant difference was observed with regard to either genotype distributions or allele frequencies of the I/D polymorphism of ACE gene. Discussion Our findings suggest that the ACE I/D polymorphism is not associated with MDD in Turkish case-control study. Further studies are still needed.

HEXNOD23, 2-D, 3-D Coarse Mesh Solution of Steady State Diffusion Equation in Hexagonal Geometry

International Nuclear Information System (INIS)

Grundmann, Ulrich

1986-01-01

1 - Description of program or function: Two- or three dimensional coarse mesh solution of steady state two group neutron diffusion equation in arrays of regular hexagons or hexagonal subassemblies. 2 - Method of solution: The neutron flux in a hexagonal node is expanded in a series of Bessel functions in the hexagonal plane. Polynomials up to the 4. order are used for the approximation of neutron flux in axial direction of three dimensional cases. Resulting relations between node averaged fluxes and mean partial currents of node faces in connection with the neutron balance of nodes are used to calculate the eigenvalue Keff, mean fluxes and mean powers of nodes. The iterations process is divided into inner and outer iterations. The iterations are accelerated by Ljusternik and Tschebyscheff extrapolation schemes. The power densities in the nodes and subassembly powers are computed for given reactor power in three dimensional cases. 30 degree reflectional, 60 and 120 degree rotational core symmetry and the whole core can be treated. 3 - Restrictions on the complexity of the problem: If the problem size designated by LIAR and LRAR exceeds 3000 and 50000 respectively, the lengths of the working array MIAR and MRAR in the main program can be increased. External sources are not permitted

Compact D-D/D-T neutron generators and their applications

International Nuclear Information System (INIS)

Lou, Tak Pui

2003-01-01

Neutron generators based on the 2 H(d,n) 3 He and 3 H(d,n) 4 He fusion reactions are the most commonly available neutron sources. The applications of current commercial neutron generators are often limited by their low neutron yield and their short operational lifetime. A new generation of D-D/D-T fusion-based neutron generators has been designed at Lawrence Berkeley National Laboratory (LBNL) by using high current ion beams hitting on a self-loading target that has a large surface area to dissipate the heat load. This thesis describes the rationale behind the new designs and their potential applications. A survey of other neutron sources is presented to show their advantages and disadvantages compared to the fusion-based neutron generator. A prototype neutron facility was built at LBNL to test these neutron generators. High current ion beams were extracted from an RF-driven ion source to produce neutrons. With an average deuteron beam current of 24 mA and an energy of 100 keV, a neutron yield of >10 9 n/s has been obtained with a D-D coaxial neutron source. Several potential applications were investigated by using computer simulations. The computer code used for simulations and the variance reduction techniques employed were discussed. A study was carried out to determine the neutron flux and resolution of a D-T neutron source in thermal neutron scattering applications for condensed matter experiments. An error analysis was performed to validate the scheme used to predict the resolution. With a D-T neutron yield of 10 14 n/s, the thermal neutron flux at the sample was predicted to be 7.3 x 10 5 n/cm 2 s. It was found that the resolution of cold neutrons was better than that of thermal neutrons when the duty factor is high. This neutron generator could be efficiently used for research and educational purposes at universities. Additional applications studied were positron production and Boron Neutron Capture Therapy (BNCT). The neutron flux required for positron

Aerobic exercise training differentially affects ACE C- and N-domain activities in humans: Interactions with ACE I/D polymorphism and association with vascular reactivity.

Science.gov (United States)

Alves, Cléber Rene; Fernandes, Tiago; Lemos, José Ribeiro; Magalhães, Flávio de Castro; Trombetta, Ivani Credidio; Alves, Guilherme Barreto; Mota, Glória de Fátima Alves da; Dias, Rodrigo Gonçalves; Pereira, Alexandre Costa; Krieger, José Eduardo; Negrão, Carlos Eduardo; Oliveira, Edilamar Menezes

2018-01-01

Previous studies have linked angiotensin-converting enzyme ( ACE) insertion (I)/deletion (D) polymorphism (II, ID and DD) to physical performance. Moreover, ACE has two catalytic domains: NH2 (N) and COOH (C) with distinct functions, and their activity has been found to be modulated by ACE polymorphism. The aim of the present study is to investigate the effects of the interaction between aerobic exercise training (AET) and ACE I/D polymorphism on ACE N- and C-domain activities and vascular reactivity in humans. A total of 315 pre-selected healthy males were genotyped for II, ID and DD genotypes. Fifty completed the full AET (II, n = 12; ID, n = 25; and DD, n = 13), performed in three 90-minute sessions weekly, in the four-month exercise protocol. Pre- and post-training resting heart rate (HR), peak O 2 consumption (VO 2 peak), mean blood pressure (MBP), forearm vascular conduction (FVC), total circulating ACE and C- and N-domain activities were assessed. One-way ANOVA and two -way repeated-measures ANOVA were used. In pre-training, all variables were similar among the three genotypes. In post-training, a similar increase in FVC (35%) was observed in the three genotypes. AET increased VO 2 peak similarly in II, ID and DD (49±2 vs. 57±1; 48±1 vs. 56±3; and 48±5 vs. 58±2 ml/kg/min, respectively). Moreover, there were no changes in HR and MBP. The DD genotype was also associated with greater ACE and C-domain activities at pre- and post-training when compared to II. AET decreased similarly the total ACE and C-domain activities in all genotypes, while increasing the N-domain activity in the II and DD genotypes. However, interestingly, the measurements of N-domain activity after training indicate a greater activity than the other genotypes. These results suggest that the vasodilation in response to AET may be associated with the decrease in total ACE and C-domain activities, regardless of genotype, and that the increase in N-domain activity is dependent on the DD

CALTRANS: A parallel, deterministic, 3D neutronics code

Energy Technology Data Exchange (ETDEWEB)

Carson, L.; Ferguson, J.; Rogers, J.

1994-04-01

Our efforts to parallelize the deterministic solution of the neutron transport equation has culminated in a new neutronics code CALTRANS, which has full 3D capability. In this article, we describe the layout and algorithms of CALTRANS and present performance measurements of the code on a variety of platforms. Explicit implementation of the parallel algorithms of CALTRANS using both the function calls of the Parallel Virtual Machine software package (PVM 3.2) and the Meiko CS-2 tagged message passing library (based on the Intel NX/2 interface) are provided in appendices.

MSLB coupled 3D neutronics-thermalhydraulic analysis of a large PWR using RELAP5-3D

International Nuclear Information System (INIS)

Lo Nigro, A.; Spadoni, A.; D'Auria, F.; Saiu, G.

2001-01-01

A RELAP5-3D model of the Westinghouse AP1000 NSSS has been set up and it has been used to analyze the MSLB accident. Main results (both spatial distributions and time trends) have been represented with 3D plots and graphical movies. The method applied allows accounting for the coupled 3D neutronics and thermalyhdraulics effects, suggesting to consider its applicability in Safety Analysis.(author)

Compact D-D/D-T neutron generators and their applications

Energy Technology Data Exchange (ETDEWEB)

Lou, Tak Pui [Univ. of California, Berkeley, CA (United States)

2003-01-01

Neutron generators based on the ²H(d,n)³He and ³H(d,n)⁴He fusion reactions are the most commonly available neutron sources. The applications of current commercial neutron generators are often limited by their low neutron yield and their short operational lifetime. A new generation of D-D/D-T fusion-based neutron generators has been designed at Lawrence Berkeley National Laboratory (LBNL) by using high current ion beams hitting on a self-loading target that has a large surface area to dissipate the heat load. This thesis describes the rationale behind the new designs and their potential applications. A survey of other neutron sources is presented to show their advantages and disadvantages compared to the fusion-based neutron generator. A prototype neutron facility was built at LBNL to test these neutron generators. High current ion beams were extracted from an RF-driven ion source to produce neutrons. With an average deuteron beam current of 24 mA and an energy of 100 keV, a neutron yield of >10⁹ n/s has been obtained with a D-D coaxial neutron source. Several potential applications were investigated by using computer simulations. The computer code used for simulations and the variance reduction techniques employed were discussed. A study was carried out to determine the neutron flux and resolution of a D-T neutron source in thermal neutron scattering applications for condensed matter experiments. An error analysis was performed to validate the scheme used to predict the resolution. With a D-T neutron yield of 10¹⁴ n/s, the thermal neutron flux at the sample was predicted to be 7.3 x 10⁵ n/cm²s. It was found that the resolution of cold neutrons was better than that of thermal neutrons when the duty factor is high. This neutron generator could be efficiently used for research and educational purposes at universities. Additional applications studied were positron production and

ACE and ACTN3 genes polymorphisms among female Hungarian athletes in the aspect of sport disciplines.

Science.gov (United States)

Bosnyák, E; Trájer, E; Udvardy, A; Komka, Z; Protzner, A; Kováts, T; Györe, I; Tóth, M; Pucsok, J; Szmodis, M

2015-12-01

The aim of the study was to determine the importance of two sport-associated gene polymorphisms, alpha-actinin-3 R577X (ACTN3) and angiotensin-converting enzyme I/D (ACE), among Hungarian athletes in different sports. The examination was carried out only on women (n = 100). Sport-specific groups were formed in order to guarantee the most homogeneous clusters. Human genomic DNA was isolated from blood, and genotyping was performed by polymerase chain reaction. To measure the differences between the participating groups, Chi-squared test was performed using Statistica 9.0 for Windows® (significance level: p ACE I/D allele frequencies, significant difference was detected between water polo (I = 61.11%; D = 38.89%) and combat sports (I = 35.71%, D = 64.29%) athletes (p ACE I/D alleles in combat sports and kayaking/rowing (p > 0.05) were compared. A similarity was detectable in the I allele frequencies of the water polo (61.11%) and kayaking/rowing (56.67%) groups. The ACTN3 R/X polymorphism showed no differences in comparison with the sport groups. R allele frequencies were higher in every group compared to the X allele. The potential significance of the ACE I allele in sports of an aerobic nature was not clearly confirmed among Hungarian athletes.

Development of ITER 3D neutronics model and nuclear analyses

International Nuclear Information System (INIS)

Zeng, Q.; Zheng, S.; Lu, L.; Li, Y.; Ding, A.; Hu, H.; Wu, Y.

2007-01-01

ITER nuclear analyses rely on the calculations with the three-dimensional (3D) Monte Carlo code e.g. the widely-used MCNP. However, continuous changes in the design of the components require the 3D neutronics model for nuclear analyses should be updated. Nevertheless, the modeling of a complex geometry with MCNP by hand is a very time-consuming task. It is an efficient way to develop CAD-based interface code for automatic conversion from CAD models to MCNP input files. Based on the latest CAD model and the available interface codes, the two approaches of updating 3D nuetronics model have been discussed by ITER IT (International Team): The first is to start with the existing MCNP model 'Brand' and update it through a combination of direct modification of the MCNP input file and generation of models for some components directly from the CAD data; The second is to start from the full CAD model, make the necessary simplifications, and generate the MCNP model by one of the interface codes. MCAM as an advanced CAD-based MCNP interface code developed by FDS Team in China has been successfully applied to update the ITER 3D neutronics model by adopting the above two approaches. The Brand model has been updated to generate portions of the geometry based on the newest CAD model by MCAM. MCAM has also successfully performed conversion to MCNP neutronics model from a full ITER CAD model which is simplified and issued by ITER IT to benchmark the above interface codes. Based on the two updated 3D neutronics models, the related nuclear analyses are performed. This paper presents the status of ITER 3D modeling by using MCAM and its nuclear analyses, as well as a brief introduction of advanced version of MCAM. (authors)

The ACE gene D/I polymorphism as a modulator of severity of cystic fibrosis

Directory of Open Access Journals (Sweden)

Marson Fernando A L

2012-08-01

Full Text Available Abstract Background Cystic Fibrosis (CF is a monogenic disease with complex expression because of the action of genetic and environmental factors. We investigated whether the ACE gene D/I polymorphism is associated with severity of CF. Methods A cross-sectional study was performed, from 2009 to 2011, at University of Campinas – UNICAMP. We analyzed 180 patients for the most frequent mutations in the CFTR gene, presence of the ACE gene D/I polymorphism and clinical characteristics of CF. Results There was an association of the D/D genotype with early initiation of clinical manifestations (OR: 1.519, CI: 1.074 to 2.146, bacterium Burkholderia cepacia colonization (OR: 3.309, CI: 1.476 to 6.256 and Bhalla score (BS (p = 0.015. The association was observed in subgroups of patients which were defined by their CFTR mutation genotype (all patients; subgroup I: no mutation detected; subgroup II: one CFTR allele identified to mutation class I, II or III; subgroup III: both CFTR alleles identified to mutation class I, II and/or III. Conclusion An association between the D allele in the ACE gene and the severity of CF was found in our study.

ACE Gene I/D Polymorphism and Obesity in 1,574 Patients with Type 2 Diabetes Mellitus.

Science.gov (United States)

Pan, Yan-Hong; Wang, Min; Huang, Yan-Mei; Wang, Ying-Hui; Chen, Yin-Ling; Geng, Li-Jun; Zhang, Xiao-Xi; Zhao, Hai-Lu

2016-01-01

Association between ACE gene I/D polymorphism and the risk of overweight/obesity remains controversial. We investigated the possible relationship between ACE gene I/D polymorphism and obesity in Chinese type 2 diabetes mellitus (T2DM) patients. In this study, obesity was defined as a body mass index (BMI) value ≥ 25 kg/m 2 and subjects were classified into 4 groups (lean, normal, overweight, and obese). PCR (polymerase chain reaction) was used to detect the ACE gene I/D polymorphism in T2DM patients. Metabolic measurements including blood glucose, lipid profile, and blood pressure were obtained. Frequencies of the ACE genotypes (DD, ID, and II) were not significant among the 4 groups of BMI-defined patients ( P = 0.679) while ACE II carriers showed higher systolic blood pressure (SBP) and pulse pressure (PP) (all P ACE gene I/D polymorphism with obesity is insignificant in Chinese patients with T2DM. SBP and PP might be higher in the ACE II carriers than in the DD and ID carriers.

Solution of the neutron diffusion equation to study the 3D distribution of power, applied to nuclear reactors; Solucao da equacao de difusao de neutrons para o estudo da distribuicao de potencia em 3D, aplicado a reatores nucleares

Energy Technology Data Exchange (ETDEWEB)

Costa, Danilo Leite

2013-07-01

This work aims to present a study about the power distribution behavior in a PWR type reactor, considering both intensity and migration of power peaks due to insertion of control rods into the core. Employing the multidimensional steady-state neutron diffusion equation in order to simulate the neutron flux, and using the Finite Difference Method. Furthermore, based on the axial power distribution on the largest heat flux rod, is carried out thermal analysis of this rod and associated coolant channel. For this purpose is employed the FueLRod{sub 3}D code, it uses the Finite Element Method to model the fuel rod and the associated coolant channel, allowing the thermohydraulics simulation of a single rod discretized in three dimensions, considering the heat flux from the pellet, crossing the gap and the cladding until it reaches the coolant. (author)

New Multi-group Transport Neutronics (PHISICS) Capabilities for RELAP5-3D and its Application to Phase I of the OECD/NEA MHTGR-350 MW Benchmark

Energy Technology Data Exchange (ETDEWEB)

Gerhard Strydom; Cristian Rabiti; Andrea Alfonsi

2012-10-01

PHISICS is a neutronics code system currently under development at the Idaho National Laboratory (INL). Its goal is to provide state of the art simulation capability to reactor designers. The different modules for PHISICS currently under development are a nodal and semi-structured transport core solver (INSTANT), a depletion module (MRTAU) and a cross section interpolation (MIXER) module. The INSTANT module is the most developed of the mentioned above. Basic functionalities are ready to use, but the code is still in continuous development to extend its capabilities. This paper reports on the effort of coupling the nodal kinetics code package PHISICS (INSTANT/MRTAU/MIXER) to the thermal hydraulics system code RELAP5-3D, to enable full core and system modeling. This will enable the possibility to model coupled (thermal-hydraulics and neutronics) problems with more options for 3D neutron kinetics, compared to the existing diffusion theory neutron kinetics module in RELAP5-3D (NESTLE). In the second part of the paper, an overview of the OECD/NEA MHTGR-350 MW benchmark is given. This benchmark has been approved by the OECD, and is based on the General Atomics 350 MW Modular High Temperature Gas Reactor (MHTGR) design. The benchmark includes coupled neutronics thermal hydraulics exercises that require more capabilities than RELAP5-3D with NESTLE offers. Therefore, the MHTGR benchmark makes extensive use of the new PHISICS/RELAP5-3D coupling capabilities. The paper presents the preliminary results of the three steady state exercises specified in Phase I of the benchmark using PHISICS/RELAP5-3D.

Association of Angiotensin-Converting Enzyme ACE Gene Polymorphism with ACE Activity and Susceptibility to Vitiligo in Egyptian Population.

Science.gov (United States)

Badran, Dahlia I; Nada, Hesham; Hassan, Ranya

2015-05-01

The insertion/deletion (I/D) polymorphism of the angiotensin-converting enzyme (ACE) gene is associated with vitiligo in the Indians and Koreans, but not in those of English or Turkish background. We investigated the ACE (I/D) polymorphism in vitiligo patients for the first time in Egypt and compared serum ACE levels between vitiligo patients and controls. The present study was carried out in 100 vitiligo patients (40 males and 60 females) and in 100 healthy controls of an Egyptian population using the polymerase chain reaction genotyping method. The ACE genotype and allele frequency was significantly different between vitiligo patients and controls. Our results revealed a significant increase in the frequency of the ACE I allele (p=0.002; odds ratio: 1.99; 95% confidence intervals: 1.207-3.284) with an overrepresentation of I/D genotype in the vitiligo patient group. Furthermore, there was a significant difference between the segmental, nonsegmental, and focal vitiligo in ACE gene genotype distribution. Serum ACE levels were significantly increased in vitiligo patients compared to controls (p=0.034). This study suggests that, for the first time, ACE gene polymorphism confers susceptibility to vitiligo in the Egyptian population.

GAMSOR: Gamma Source Preparation and DIF3D Flux Solution

Energy Technology Data Exchange (ETDEWEB)

Smith, M. A. [Argonne National Lab. (ANL), Argonne, IL (United States); Lee, C. H. [Argonne National Lab. (ANL), Argonne, IL (United States); Hill, R. N. [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-12-15

Nuclear reactors that rely upon the fission reaction have two modes of thermal energy deposition in the reactor system: neutron absorption and gamma absorption. The gamma rays are typically generated by neutron absorption reactions or during the fission process which means the primary driver of energy production is of course the neutron interaction. In conventional reactor physics methods, the gamma heating component is ignored such that the gamma absorption is forced to occur at the gamma emission site. For experimental reactor systems like EBR-II and FFTF, the placement of structural pins and assemblies internal to the core leads to problems with power heating predictions because there is no fission power source internal to the assembly to dictate a spatial distribution of the power. As part of the EBR-II support work in the 1980s, the GAMSOR code was developed to assist analysts in calculating the gamma heating. The GAMSOR code is a modified version of DIF3D and actually functions within a sequence of DIF3D calculations. The gamma flux in a conventional fission reactor system does not perturb the neutron flux and thus the gamma flux calculation can be cast as a fixed source problem given a solution to the steady state neutron flux equation. This leads to a sequence of DIF3D calculations, called the GAMSOR sequence, which involves solving the neutron flux, then the gamma flux, then combining the results to do a summary edit. In this manuscript, we go over the GAMSOR code and detail how it is put together and functions. We also discuss how to setup the GAMSOR sequence and input for each DIF3D calculation in the GAMSOR sequence. With the GAMSOR capability, users can take any valid steady state DIF3D calculation and compute the power distribution due to neutron and gamma heating. The MC2-3 code is the preferable companion code to use for generating neutron and gamma cross section data, but the GAMSOR code can accept cross section data from other sources. To further

Synergism of the method of characteristic, R-functions and diffusion solution for accurate representation of 3D neutron interactions in research reactors using the AGENT code system

International Nuclear Information System (INIS)

Hursin, Mathieu; Xiao Shanjie; Jevremovic, Tatjana

2006-01-01

This paper summarizes the theoretical and numerical aspects of the AGENT code methodology accurately applied for detailed three-dimensional (3D) multigroup steady-state modeling of neutron interactions in complex heterogeneous reactor domains. For the first time we show the fine-mesh neutron scalar flux distribution in Purdue research reactor (that was built over forty years ago). The AGENT methodology is based on the unique combination of the three theories: the method of characteristics (MOC) used to simulate the neutron transport in two-dimensional (2D) whole core heterogeneous calculation, the theory of R-functions used as a mathematical tool to describe the true geometry and fuse with the MOC equations, and one-dimensional (1D) higher-order diffusion correction of 2D transport model to account for full 3D heterogeneous whole core representation. The synergism between the radial 2D transport and the 1D axial transport (to take into account the axial neutron interactions and leakage), called the 2D/1D method (used in DeCART and CHAPLET codes), provides a 3D computational solution. The unique synergism between the AGENT geometrical algorithm capable of modeling any current or future reactor core geometry and 3D neutron transport methodology is described in details. The 3D AGENT accuracy and its efficiency are demonstrated showing the eigenvalues, point-wise flux and reaction rate distributions in representative reactor geometries. The AGENT code, comprising this synergism, represents a building block of the computational system, called the virtual reactor. Its main purpose is to perform 'virtual' experiments and demonstrations of various mainly university research reactor experiments

Solution of the neutron diffusion equation to study the 3D distribution of power, applied to nuclear reactors

International Nuclear Information System (INIS)

Costa, Danilo Leite

2013-01-01

This work aims to present a study about the power distribution behavior in a PWR type reactor, considering both intensity and migration of power peaks due to insertion of control rods into the core. Employing the multidimensional steady-state neutron diffusion equation in order to simulate the neutron flux, and using the Finite Difference Method. Furthermore, based on the axial power distribution on the largest heat flux rod, is carried out thermal analysis of this rod and associated coolant channel. For this purpose is employed the FueLRod 3 D code, it uses the Finite Element Method to model the fuel rod and the associated coolant channel, allowing the thermohydraulics simulation of a single rod discretized in three dimensions, considering the heat flux from the pellet, crossing the gap and the cladding until it reaches the coolant. (author)

Insertion/deletion polymorphism of the ACE gene and adherence to ACE inhibitors

NARCIS (Netherlands)

Schelleman, H; Klungel, O H; van Duijn, C M; Witteman, J C M; Hofman, A; de Boer, A; Stricker, B H Ch

AIMS: We investigated whether the insertion/deletion (I/D) polymorphism of the ACE gene modified the adherence to ACE inhibitors as measured by the discontinuation of an ACE inhibitor, or addition of another antihypertensive drug. METHODS: This was a cohort study among 239 subjects who started ACE

Telomere length is associated with ACE I/D polymorphism in hypertensive patients with left ventricular hypertrophy

DEFF Research Database (Denmark)

Fyhrquist, Frej; Eriksson, Anders; Saijonmaa, Outi

2013-01-01

INTRODUCTION: Short telomeres are often associated with cardiovascular risk factors and age-related diseases, while the angiotensin converting enzyme (ACE) gene insertion/deletion polymorphism (DD, ID, II) has shown such associations less consistently. We hypothesized that telomere length...... and association of telomere length with cardiovascular risk is affected by ACE (I/D) genotype. METHODS: We measured leucocyte telomere length (LTL) by Southern blot and analysed ACE I/D genotypes in 1249 subjects with hypertension and left ventricular hypertrophy (LVH). We examined interactions of ACE I...

ACE I/D polymorphism in Indian patients with hypertrophic cardiomyopathy and dilated cardiomyopathy

DEFF Research Database (Denmark)

Rai, Taranjit Singh; Dhandapany, Perundurai Subramaniam; Ahluwalia, Tarun Veer Singh

2008-01-01

The study was carried to determine the association of angiotensin converting enzyme (ACE) insertion/deletion (I/D) polymorphism with the risk of hypertrophic cardiomyopathy (HCM), dilated cardiomyopathy (DCM), and restrictive cardiomyopathy (RCM).......The study was carried to determine the association of angiotensin converting enzyme (ACE) insertion/deletion (I/D) polymorphism with the risk of hypertrophic cardiomyopathy (HCM), dilated cardiomyopathy (DCM), and restrictive cardiomyopathy (RCM)....

Research on GPU-accelerated algorithm in 3D finite difference neutron diffusion calculation method

International Nuclear Information System (INIS)

Xu Qi; Yu Ganglin; Wang Kan; Sun Jialong

2014-01-01

In this paper, the adaptability of the neutron diffusion numerical algorithm on GPUs was studied, and a GPU-accelerated multi-group 3D neutron diffusion code based on finite difference method was developed. The IAEA 3D PWR benchmark problem was calculated in the numerical test. The results demonstrate both high efficiency and adequate accuracy of the GPU implementation for neutron diffusion equation. (authors)

Production of 14 MeV neutrons from D-D neutron generators

International Nuclear Information System (INIS)

Cecil, F.E.; Nieschmidt, E.B.

1986-01-01

The production of 14 MeV neutrons from a D-D neutron generator resulting from tritium buildup from the d(d,p)t reaction in the target is discussed. The effect of the 14 MeV neutrons on fast neutron activation analysis with D-D neutron generators is evaluated. (orig.)

The code DYN3DR for steady-state and transient analyses of light water reactor cores with Cartesian geometry

International Nuclear Information System (INIS)

Grundmann, U.

1995-11-01

The code DYN3D/M2 was developed for 3-dimensional steady-state and transient analyses of reactor cores with hexagonal fuel assemblies. The neutron kinetics of the new version DYN3DR is based on a nodal method for the solution of the 3-dimensional 2-group neutron diffusion equation for Cartesian geometry. The thermal-hydraulic model FLOCAL simulating the two phase flow of coolant and the fuel rod behaviour is used in the two versions. The fundamentals for the solution of the neutron diffusion equations in DYN3DR are described. The 3-dimensional NEACRP benchmarks for rod ejections in LWR with quadratic fuel assemblies were calculated and the results were compared with the published solutions. The developed algorithm for neutron kinetics are suitable for using parallel processing. The behaviour of speed-up versus the number of processors is demonstrated for calculations of a static neutron flux distribution using a workstation with 4 processors. (orig.) [de

Results of comparative RBMK neutron computation using VNIIEF codes (cell computation, 3D statics, 3D kinetics). Final report

Energy Technology Data Exchange (ETDEWEB)

Grebennikov, A.N.; Zhitnik, A.K.; Zvenigorodskaya, O.A. [and others

1995-12-31

In conformity with the protocol of the Workshop under Contract {open_quotes}Assessment of RBMK reactor safety using modern Western Codes{close_quotes} VNIIEF performed a neutronics computation series to compare western and VNIIEF codes and assess whether VNIIEF codes are suitable for RBMK type reactor safety assessment computation. The work was carried out in close collaboration with M.I. Rozhdestvensky and L.M. Podlazov, NIKIET employees. The effort involved: (1) cell computations with the WIMS, EKRAN codes (improved modification of the LOMA code) and the S-90 code (VNIIEF Monte Carlo). Cell, polycell, burnup computation; (2) 3D computation of static states with the KORAT-3D and NEU codes and comparison with results of computation with the NESTLE code (USA). The computations were performed in the geometry and using the neutron constants presented by the American party; (3) 3D computation of neutron kinetics with the KORAT-3D and NEU codes. These computations were performed in two formulations, both being developed in collaboration with NIKIET. Formulation of the first problem maximally possibly agrees with one of NESTLE problems and imitates gas bubble travel through a core. The second problem is a model of the RBMK as a whole with imitation of control and protection system controls (CPS) movement in a core.

Stability and accuracy of 3D neutron transport simulations using the 2D/1D method in MPACT

International Nuclear Information System (INIS)

Collins, Benjamin; Stimpson, Shane; Kelley, Blake W.; Young, Mitchell T.H.; Kochunas, Brendan; Graham, Aaron; Larsen, Edward W.; Downar, Thomas; Godfrey, Andrew

2016-01-01

A consistent “2D/1D” neutron transport method is derived from the 3D Boltzmann transport equation, to calculate fuel-pin-resolved neutron fluxes for realistic full-core Pressurized Water Reactor (PWR) problems. The 2D/1D method employs the Method of Characteristics to discretize the radial variables and a lower order transport solution to discretize the axial variable. This paper describes the theory of the 2D/1D method and its implementation in the MPACT code, which has become the whole-core deterministic neutron transport solver for the Consortium for Advanced Simulations of Light Water Reactors (CASL) core simulator VERA-CS. Several applications have been performed on both leadership-class and industry-class computing clusters. Results are presented for whole-core solutions of the Watts Bar Nuclear Power Station Unit 1 and compared to both continuous-energy Monte Carlo results and plant data.

Stability and accuracy of 3D neutron transport simulations using the 2D/1D method in MPACT

Energy Technology Data Exchange (ETDEWEB)

Collins, Benjamin, E-mail: collinsbs@ornl.gov [Oak Ridge National Laboratory, One Bethel Valley Rd., Oak Ridge, TN 37831 (United States); Stimpson, Shane, E-mail: stimpsonsg@ornl.gov [Oak Ridge National Laboratory, One Bethel Valley Rd., Oak Ridge, TN 37831 (United States); Kelley, Blake W., E-mail: kelleybl@umich.edu [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, MI 48109 (United States); Young, Mitchell T.H., E-mail: youngmit@umich.edu [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, MI 48109 (United States); Kochunas, Brendan, E-mail: bkochuna@umich.edu [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, MI 48109 (United States); Graham, Aaron, E-mail: aarograh@umich.edu [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, MI 48109 (United States); Larsen, Edward W., E-mail: edlarsen@umich.edu [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, MI 48109 (United States); Downar, Thomas, E-mail: downar@umich.edu [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, MI 48109 (United States); Godfrey, Andrew, E-mail: godfreyat@ornl.gov [Oak Ridge National Laboratory, One Bethel Valley Rd., Oak Ridge, TN 37831 (United States)

2016-12-01

A consistent “2D/1D” neutron transport method is derived from the 3D Boltzmann transport equation, to calculate fuel-pin-resolved neutron fluxes for realistic full-core Pressurized Water Reactor (PWR) problems. The 2D/1D method employs the Method of Characteristics to discretize the radial variables and a lower order transport solution to discretize the axial variable. This paper describes the theory of the 2D/1D method and its implementation in the MPACT code, which has become the whole-core deterministic neutron transport solver for the Consortium for Advanced Simulations of Light Water Reactors (CASL) core simulator VERA-CS. Several applications have been performed on both leadership-class and industry-class computing clusters. Results are presented for whole-core solutions of the Watts Bar Nuclear Power Station Unit 1 and compared to both continuous-energy Monte Carlo results and plant data.

Research on steady-state visual evoked potentials in 3D displays

Science.gov (United States)

Chien, Yu-Yi; Lee, Chia-Ying; Lin, Fang-Cheng; Huang, Yi-Pai; Ko, Li-Wei; Shieh, Han-Ping D.

2015-05-01

Brain-computer interfaces (BCIs) are intuitive systems for users to communicate with outer electronic devices. Steady state visual evoked potential (SSVEP) is one of the common inputs for BCI systems due to its easy detection and high information transfer rates. An advanced interactive platform integrated with liquid crystal displays is leading a trend to provide an alternative option not only for the handicapped but also for the public to make our lives more convenient. Many SSVEP-based BCI systems have been studied in a 2D environment; however there is only little literature about SSVEP-based BCI systems using 3D stimuli. 3D displays have potentials in SSVEP-based BCI systems because they can offer vivid images, good quality in presentation, various stimuli and more entertainment. The purpose of this study was to investigate the effect of two important 3D factors (disparity and crosstalk) on SSVEPs. Twelve participants participated in the experiment with a patterned retarder 3D display. The results show that there is a significant difference (p-value<0.05) between large and small disparity angle, and the signal-to-noise ratios (SNRs) of small disparity angles is higher than those of large disparity angles. The 3D stimuli with smaller disparity and lower crosstalk are more suitable for applications based on the results of 3D perception and SSVEP responses (SNR). Furthermore, we can infer the 3D perception of users by SSVEP responses, and modify the proper disparity of 3D images automatically in the future.

Gender difference of serum angiotensin-converting enzyme (ACE) activity in DD genotype of ACE insertion/deletion polymorphism in elderly Chinese.

Science.gov (United States)

Zhang, Ya-Feng; Cheng, Qiong; Tang, Nelson L S; Chu, Tanya T W; Tomlinson, Brian; Liu, Fan; Kwok, Timothy C Y

2014-12-01

In this study we investigated the gender difference of serum angiotensin-converting enzyme (ACE) activity in a population of Hong Kong-dwelling elderly Chinese. A total of 1767 (843 male, 924 female) Hong Kong-dwelling elderly Chinese were recruited. ACE I/D genotypes were identified by polymerase chain reaction amplification and serum ACE activity was determined using a commercially available kinetic kit. ACE I/D genotype distribution was compared by chi-square test, the correlation between ACE I/D polymorphism and serum ACE activity was analysed by ANOVA test and gender difference of serum ACE activity of different genotypes was compared by independent sample t-test. No statistically significant difference of genotype distribution between male and female subjects was found. Serum ACE activity was significantly correlated with ACE genotype. Overall, there was no gender difference of serum ACE activity; however, when sub-grouping the subjects by ACE I/D genotype, male subjects with DD genotype had higher serum ACE activity than female subjects with DD genotype. No significant gender difference of genotype distribution was found in elderly Chinese. Serum ACE activity was significantly correlated with ACE I/D polymorphism in elderly Chinese. Male subjects with DD genotype had higher serum ACE activity than female subjects with DD genotype. © The Author(s) 2013.

Experiment of Neutron Generation by Using Prototype D-D Neutron Generator

International Nuclear Information System (INIS)

Kim, In Jung; Kim, Suk Kwon; Park, Chang Su; Jung, Nam Suk; Jung, Hwa Dong; Park, Ji Young; Hwang, Yong Seok; Choi, H.D.

2005-01-01

Experiment of neutron generation was performed by using a prototype D-D neutron generator. The characteristics of D-D neutron generation in drive-in target was studied. The increment of neutron yield by increasing ion beam energy was investigated, too

Development of 3D multi-group neutron diffusion code for hexagonal geometry

International Nuclear Information System (INIS)

Sun Wei; Wang Kan; Ni Dongyang; Li Qing

2013-01-01

Based on the theory of new flux expansion nodal method to solve the neutron diffusion equations, the intra-nodal fluence rate distribution was expanded in a series of analytic basic functions for each group. In order to improve the accuracy of calculation result, continuities of neutron fluence rate and current were utilized across the nodal surfaces. According to the boundary conditions, the iteration method was adopted to solve the diffusion equation, where inner iteration speedup method is Gauss-Seidel method and outer is Lyusternik-Wagner. A new speedup method (one-outer-iteration and multi-inner-iteration method) was proposed according to the characteristic that the convergence speed of multiplication factor is faster than that of neutron fluence rate and the update of inner iteration matrix is slow. Based on the proposed model, the code HANDF-D was developed and tested by 3D two-group vver440 benchmark, experiment 2 of HFETR, 3D four-group thermal reactor benchmark, and 3D seven-group fast reactor benchmark. The numerical results show that HANDF-D can predict accurately the multiplication factor and nodal powers. (authors)

Development of multi-physics code systems based on the reactor dynamics code DYN3D

Energy Technology Data Exchange (ETDEWEB)

Kliem, Soeren; Gommlich, Andre; Grahn, Alexander; Rohde, Ulrich [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany); Schuetze, Jochen [ANSYS Germany GmbH, Darmstadt (Germany); Frank, Thomas [ANSYS Germany GmbH, Otterfing (Germany); Gomez Torres, Armando M.; Sanchez Espinoza, Victor Hugo [Karlsruher Institut fuer Technologie (KIT), Eggenstein-Leopoldshafen (Germany)

2011-07-15

The reactor dynamics code DYN3D has been coupled with the CFD code ANSYS CFX and the 3D thermal hydraulic core model FLICA4. In the coupling with ANSYS CFX, DYN3D calculates the neutron kinetics and the fuel behavior including the heat transfer to the coolant. The physical data interface between the codes is the volumetric heat release rate into the coolant. In the coupling with FLICA4 only the neutron kinetics module of DYN3D is used. Fluid dynamics and related transport phenomena in the reactor's coolant and fuel behavior is calculated by FLICA4. The correctness of the coupling of DYN3D with both thermal hydraulic codes was verified by the calculation of different test problems. These test problems were set-up in such a way that comparison with the DYN3D stand-alone code was possible. This included steady-state and transient calculations of a mini-core consisting of nine real-size PWR fuel assemblies with ANSYS CFX/DYN3D as well as mini-core and a full core steady-state calculation using FLICA4/DYN3D. (orig.)

Development of multi-physics code systems based on the reactor dynamics code DYN3D

International Nuclear Information System (INIS)

Kliem, Soeren; Gommlich, Andre; Grahn, Alexander; Rohde, Ulrich; Schuetze, Jochen; Frank, Thomas; Gomez Torres, Armando M.; Sanchez Espinoza, Victor Hugo

2011-01-01

The reactor dynamics code DYN3D has been coupled with the CFD code ANSYS CFX and the 3D thermal hydraulic core model FLICA4. In the coupling with ANSYS CFX, DYN3D calculates the neutron kinetics and the fuel behavior including the heat transfer to the coolant. The physical data interface between the codes is the volumetric heat release rate into the coolant. In the coupling with FLICA4 only the neutron kinetics module of DYN3D is used. Fluid dynamics and related transport phenomena in the reactor's coolant and fuel behavior is calculated by FLICA4. The correctness of the coupling of DYN3D with both thermal hydraulic codes was verified by the calculation of different test problems. These test problems were set-up in such a way that comparison with the DYN3D stand-alone code was possible. This included steady-state and transient calculations of a mini-core consisting of nine real-size PWR fuel assemblies with ANSYS CFX/DYN3D as well as mini-core and a full core steady-state calculation using FLICA4/DYN3D. (orig.)

Pin level neutronic - thermal hydraulic two-way-coupling using DYN3D-SP3 and SUBCHANFLOW

International Nuclear Information System (INIS)

Torres, Armando Gomez; Espinoza, Victor Sanchez; Imke, Uwe; Juan, Rafael Macian

2011-01-01

Nowadays several Reactor Dynamic Codes, (RDC) are able to solve the diffusion equation or even the transport equation (SP3 approximation) considering feedback parameters coming from the thermalhydraulic (TH) core behavior. These kinds of codes (DYN3D, PARCS, among others) usually contain a 1D two phase flow thermalhydraulic model capable to pass them assembly averaged feedback parameters. At fuel assembly base this nodal coupling is completely a two way coupling. The Neutronic part calculates the mean power of the whole assembly and passes it to the TH part in order to actualize the heat source. In turn, the TH model passes the assembly-based feedback parameters to the neutronic code for actualizing the nodal cross sections. The process will be repeated until convergence. At pin level, the current situation is somehow different. Although the neutronic solver can pass the pin power distribution in every sub - node (pin distribution), the 1-D TH model will average the pin power distribution to assembly-based scale and will give back assembly averaged feedbacks to the neutronic part for cross sections up-date (one and a half way coupling), leading to information loss in the calculation. A new coupled program system DYNSUB was developed by coupling DYN3D-SP3 and SUBCHANFLOW at pin level. DYNSUB was used to analyze stationary PWR minicore problems at pin-level. The comparison of the Keff predicted by DYNSUB with the one calculated by DYN3D-SP3 (coarse TH solution) shows small differences of up to 26 pcm. Differences up to 4.5% were found in the radial distribution of the pin power. The local safety parameters such as cladding and fuel temperature predicted with DYNSUB shows larger deviations compared with the ones obtained with DYN3D-SP3. These differences may increase when analyzing transients. (author)

The angiotensin-converting enzyme (ACE) gene insertion/ deletion dimorphism tracks with higher serum ace activities in both younger and older subjects

International Nuclear Information System (INIS)

Frossard, Philippe M.; Hill, Susan H.; Obineche, Enyioma N.; Lestringant, Gilles G.

1998-01-01

The absence of a 287 base pair alu sequence in the ACE gene (D allele) is associated with higher ACE levels than its presence (I allele) in adults. We carried out a case control study of thr ACE*I/D dimorphism in relation to circulating ACE activities to evaluate associations between the two variables in adults, compared to younger (18 years or less) individuals. Genotypes of the ACE*I/D dimorphism were determined on DNA samples from a population of 164 random (unrelated) Emirtaes nationals, composed of groups: 112 subjects above 18 years of age (range=20-77), and 52 subjects of 18 years or less (range=1-18) and analyzed for putative associations with serum ACE activities. ACE*I/D genotypes of the 164 individualds were determined by assays based on polymerase chain reaction. ACE activities were determined on serum samples of these subjects bu colorimetric assays. The D allele was associared with increasd ACE values in both adult and younger individuals. Mean ACE activity levels associated with II, ID and DD genotypes, however, were 42%-61% higher in the 18 years and under group of subjects. The ACE*I/D marker accounted for 28% of the variance of the phenomenon determining ACE levels in adults, and for 30% among youngsters. The ACE*I/D dimorphism is correlated strongly with circulating ACE activities in both and young Emirati, subjects and the corresponding mean ACE activities were significantly higher among the youngsters. (author)

Insertion/deletion polymorphism of the ACE gene and adherence to ACE inhibitors

NARCIS (Netherlands)

H. Schelleman (Hedi); O.H. Klungel (Olaf); C.M. van Duijn (Cornelia); J.C.M. Witteman (Jacqueline); A. Hofman (Albert); A.C. de Boer (Anton); B.H.Ch. Stricker (Bruno)

2005-01-01

textabstractAims: We investigated whether the insertion/deletion (I/D) polymorphism of the ACE gene modified the adherence to ACE inhibitors as measured by the discontinuation of an ACE inhibitor, or addition of another antihypertensive drug. Methods: This was a cohort study among 239 subjects who

Development of a compact D-D neutron generator

Science.gov (United States)

Huang, Z.-W.; Wang, J.-R.; Wei, Z.; Lu, X.-L.; Ma, Z.-W.; Ran, J.-L.; Zhang, Z.-M.; Yao, Z.-E.; Zhang, Y.

2018-01-01

A compact D-D neutron generator was developed at Lanzhou University, China. A duoplasmatron ion source was used to produce a higher-current deuteron beam. The deuteron beam could be accelerated up to 150 keV by a single accelerating gap, and bombarded on a pure molybdenum drive-in target to produce D-D fast neutron. A bias voltage between the target and the extraction-accelerating electrode was produced by a resistance to suppress the secondary electron from the target. The neutron generator has been operated for several hundred hours, and the performances were investigated. The available range of the deuteron beam current was 1.0-4.0 mA. EJ410 scintillator detector system was used to measure the fast neutron yields. D-D neutron yield could reach 2.48×108 n/s under the deuteron beam of 3 mA and 150 keV.

Hybrid Detectors for Neutrons Combining Phenyl- Polysiloxanes with 3D Silicon Detectors

International Nuclear Information System (INIS)

Dalla Palma, Matteo; Quaranta, Alberto; Collazuol, Gianmaria; Carturan, Sara; Cinausero, Marco; Gramegna, Fabiana; Marchi, Tommaso; Dalla Betta, Gian-Franco; Mendicino, Roberto; Povoli, Marco; Boscardin, Maurizio; Giacomini, Gabriele; Ronchin, Sabina; Zorzi, Nicola

2013-06-01

We report on the initial results of a research project aimed at the development hybrid detectors for fast neutrons by combining a phenyl-polysiloxane-based converter with a 3D silicon detector. To this purpose, new 3D sensor structures have been designed, fabricated and electrically tested, showing low depletion voltage and good leakage current. Moreover, the radiation detection capability of 3D sensors was tested by measuring the signals recorded from alpha particles, gamma rays, and pulsed lasers. The converter has been poured into the 3D cavities with excellent coupling, as confirmed by cross-section SEM analyses. Preliminary tests with neutrons have been carried out on the first hybrid detector prototypes at the CN accelerator of INFN LNL. The device design and technology are discussed, along with the first results from the electrical and functional characterization. (authors)

3D steady-state MR cisternography in CSF rhinorrhoea

International Nuclear Information System (INIS)

Jayakumar, P.N.; Kovoor, J.M.E.; Srikanth, S.G.; Praharaj, S.S.

2001-01-01

Purpose: To determine the utility of 3D steady-state MR cisternography in the demonstration and localisation of cerebrospinal fluid (CSF) leak in patients with clinically suspected CSF rhinorrhoea. Material and Methods: Six consecutive patients with clinically suspected CSF rhinorrhoea were examined with routine MR evaluation and MR cisternography (MRC). All MR examinations included fast spin-echo (SE) T1WI in axial and sagittal planes, fast SE T2WI in axial and coronal planes and fluid attenuated inversion recovery (FLAIR) images in the axial plane. 3D evaluation was done using the CISS technique with 0.7-mm thickness in the sagittal and coronal planes. The site and extent of the defect, and any brain herniation detected on MRC were correlated with surgical findings. Results: In the 6 patients who underwent surgical exploration and repair, intraoperative findings correlated with the defect revealed by MRC in all cases. Conclusion: In clinically suspected CSF rhinorrhoea, MRC is highly accurate in localising the site and extent of CSF fistula and may be used as the first investigation due to its efficacy and non-invasive nature

Associations of ACE I/D, AGT M235T gene polymorphisms with pregnancy induced hypertension in Chinese population: a meta-analysis.

Science.gov (United States)

Zhu, Ming; Zhang, Jie; Nie, Shaofa; Yan, Weirong

2012-09-01

There have been many studies concerning the associations of angiotensin-converting enzyme (ACE) I/D, angiotensinogen (AGT) M235T polymorphisms with pregnancy induced hypertension (PIH) among Chinese populations. However, the results were inconsistent, prompting the necessity of meta-analysis. Studies published in English and Chinese were mainly searched in EMbase, PubMed and CBM up to January 2012. Twenty-three studies with 3,551 subjects for ACE I/D and seven studies with 1,296 subjects for AGT M235T were included. Significant associations were found between ACE I/D and PIH under dominant, recessive and allelic models. A separate analysis confined to preeclampsia suggested that ACE I/D was associated with preeclampsia under recessive model and allelic model, but not dominant model. Stratified analyses were conducted as meta-regression analysis indicated that the sample size of case group was a significant source of heterogeneity, which suggested no significant association between ACE I/D and PIH in the subgroup of more than 100 cases. Associations were found between AGT M235T and PIH under dominant genetic model (OR = 1.59; 95 %CI: 1.04-2.42), recessive genetic model (OR = 1.60; 95 %CI: 1.07-2.40), and allelic model (OR = 1.40; 95 %CI: 1.17-1.68). No publication bias was found in either meta-analysis. The present meta-analysis suggested significant associations between ACE I/D, AGT M235T and PIH in Chinese populations. However, no significant association was found between ACE I/D and PIH in the subgroup of more than 100 cases. Studies with larger sample sizes are necessary to investigate the associations between gene polymorphisms and PIH in Chinese populations.

Beneficial role of D allele in controlling ACE levels: a study among Brahmins of north India.

Science.gov (United States)

Kumari, Shobha; Sharma, Nidhi; Thakur, Sunil; Mondal, Prakash R; Saraswathy, Kallur N

2016-06-01

India being a country with vast diversity is expected to have different dietary and life style patterns which in turn may lead to population-specific environmental risk factors. Further, the interaction of these risk factors with the genetic makeup of population makes it either susceptible or resistant to cardiovascular disease. One such candidate gene is angiotensin converting enzyme (ACE) for various cardiovascular mechanisms. ACE is the key enzyme of the renin angiotensin aldosterone system pathway which maintains homeostasis blood pressure in the body and any variation in the levels is reported to be associated with various complex diseases. The DD genotype is found to increase ACE levels, which is associated with cardiovascular diseases and decrease in ACE levels are associated with kidney diseases. The aim of this study was to understand the distribution of ACE I/D polymorphism and ACE levels among Brahmins of National Capital Region (NCR) north India, with respect to age and sex ratio distribution. In this study, 136 subjects of which 50 males and 86 females, who were unrelated up to first cousin, aged 25 to70 years were studied. ACE gene was found to be polymorphic with high frequency of heterozygote (ID) followed by II and DD genotypes. The studied population was found to be in Hardy-Weinberg equilibrium with respect to ACE I/D polymorphism (P = 0.55). I allele frequency was found to be higher (0.560) than the D allele (0.44). The median level of ACE was found to be 65.96 ng/mL (48.12-86.24) which is towards lower side of the normal range. ACE levels were found to be increased among individual having either of the homozygotes that is II or DD and higher frequency of heterozygote (ID) is indicative of advantage in the population by maintaining lower ACE levels. The limitation of the present study is low sample size, however, the merit is that the subjects belonged to a Mendalian population with a common gene pool.

Associations of ACE Gene Insertion/Deletion Polymorphism, ACE Activity, and ACE mRNA Expression with Hypertension in a Chinese Population

OpenAIRE

He, Qingfang; Fan, Chunhong; Yu, Min; Wallar, Gina; Zhang, Zuo-Feng; Wang, Lixin; Zhang, Xinwei; Hu, Ruying

2013-01-01

Background The present study was designed to explore the association of angiotensin converting enzyme (ACE) gene insertion/deletion (I/D, rs4646994) polymorphism, plasma ACE activity, and circulating ACE mRNA expression with essential hypertension (EH) in a Chinese population. In addition, a new detection method for circulating ACE mRNA expression was explored. Methods The research was approved by the ethics committee of Zhejiang Provincial Center for Disease Prevention and Control. Written i...

3D neutronic codes coupled with thermal-hydraulic system codes for PWR, and BWR and VVER reactors

Energy Technology Data Exchange (ETDEWEB)

Langenbuch, S.; Velkov, K. [GRS, Garching (Germany); Lizorkin, M. [Kurchatov-Institute, Moscow (Russian Federation)] [and others

1997-07-01

This paper describes the objectives of code development for coupling 3D neutronics codes with thermal-hydraulic system codes. The present status of coupling ATHLET with three 3D neutronics codes for VVER- and LWR-reactors is presented. After describing the basic features of the 3D neutronic codes BIPR-8 from Kurchatov-Institute, DYN3D from Research Center Rossendorf and QUABOX/CUBBOX from GRS, first applications of coupled codes for different transient and accident scenarios are presented. The need of further investigations is discussed.

Technology Development for 3-D Wide Swath Imaging Supporting ACE

Science.gov (United States)

Racette, Paul; Heymsfield, Gerry; Li, Lihua; Mclinden, Matthew; Park, Richard; Cooley, Michael; Stenger, Pete; Hand, Thomas

2014-01-01

The National Academy of Sciences Decadal Survey (DS) Aerosol-Cloud-Ecosystems Mission (ACE) aims to advance our ability to observe and predict changes to the Earth's hydrological cycle and energy balance in response to climate forcing, especially those changes associated with the effects of aerosol on clouds and precipitation. ACE is focused on obtaining measurements to reduce the uncertainties in current climate models arising from the lack in understanding of aerosol-cloud interactions. As part of the mission instrument suite, a dual-frequency radar comprised of a fixed-beam 94 gigahertz (W-band) radar and a wide-swath 35 gigahertz (Ka-band) imaging radar has been recommended by the ACE Science Working Group.In our 2010 Instrument Incubator Program project, we've developed a radar architecture that addresses the challenge associated with achieving the measurement objectives through an innovative, shared aperture antenna that allows dual-frequency radar operation while achieving wide-swath (100 kilometers) imaging at Ka-band. The antenna system incorporates 2 key technologies; a) a novel dual-band reflectorreflectarray and b) a Ka-band Active Electronically Scanned Array (AESA) feed module. The dual-band antenna is comprised of a primary cylindrical reflectorreflectarray surface illuminated by a point-focus W-band feed (compatible with a quasi-optical beam waveguide feed, such as that employed on CloudSat); the Ka-band AESA line feed provides wide-swath across-track scanning. The benefits of this shared-aperture approach include significant reductions in ACE satellite payload size, weight, and cost, as compared to a two aperture approach. Four objectives were addressed in our project. The first entailed developing the tools for the analysis and design of reflectarray antennas, assessment of candidate reflectarray elements, and validation using test coupons. The second objective was to develop a full-scale aperture design utilizing the reflectarray surface and to

Novel 3D silicon sensors for neutron detection

International Nuclear Information System (INIS)

Mendicino, R; Betta, G-F Dalla; Palma, M Dalla; Perillo, E; Povoli, M; Quaranta, A; Boscardin, M; Ronchin, S; Zorzi, N; Carturan, S; Cinausero, M; Gramegna, F; Marchi, T; , University of Padova, Via Marzolo 8, 35131 Padova (Italy))" data-affiliation=" (Department of Physics and Astronomy ''G.Galilei, University of Padova, Via Marzolo 8, 35131 Padova (Italy))" >Collazuol, G

2014-01-01

In this paper we report a novel 3D sensor structure to be used as a neutron detector in combination with an organic converter material based on polysiloxane. The first prototypes of the proposed device are presented, with emphasis on the experimental characterization. Selected results from the functional tests (with alpha particle source and pulsed laser scans) are discussed with the aid of TCAD simulations

Comparison and analysis of 1D/2D/3D neutronics modeling for a fusion reactor

International Nuclear Information System (INIS)

Li, J.; Zeng, Q.; Chen, M.; Jiang, J.; Wu, Y.

2007-01-01

During the course of analyzing the characteristics for fusion reactors, the refined calculations are needed to confirm that the nuclear design requirements are met. Since the long computational time is consumed, the refined three-dimensional (3D) representation has been used primarily for establishing the baseline reference values, analyzing problems which cannot be reduced by symmetry considerations to lower dimensions, or where a high level of accuracy is desired locally. The two-dimensional (2D) or one-dimensional (1D) description leads itself readily to resolve many problems, such as the studies for the material fraction optimization, or for the blanket size optimization. The purpose of this paper is to find out the differences among different geometric descriptions, which can guide the way to approximate and simplify the computational model. The fusion power reactor named FDS-II was designed as an advanced fusion power reactor to demonstrate and validate the commercialization of fusion power by Institute of Plasma Physics, Chinese Academy of Science. In this contribution, the dual-cooled lithium lead (DLL) blanket of FDS-II was used as a reference for neutronics comparisons and analyses. The geometric descriptions include 1D concentric sphere model, 1D, 2D and 3D cylinder models. The home-developed multi-functional neutronics analysis code system VisualBUS, the Monte Carlo transport code MCNP and nuclear data library HENDL have been used for these analyses. The neutron wall loading distribution, tritium breeding ratio (TBR) and nuclear heat were calculated to evaluate the nuclear performance. The 3D calculation has been used as a comparison reference because it has the least errors in the treatment of geometry. It is suggested that the value of TBR calculated by the 1D approach should be greater than 1.3 to satisfy the practical need of tritium self-sufficiency. The distribution of nuclear heat based on the 2D and 3D models were similar since they all consider

The coupled code system TORT-TD/ATTICA3D for 3-D transient analysis of pebble-bed HTGR

International Nuclear Information System (INIS)

Seubert, A.; Sureda, A.; Lapins, J.; Buck, M.; Laurien, E.; Bader, J.; EnBW Kernkraft GmbH, Philippsburg

2012-01-01

This paper describes the time-dependent 3-D discrete-ordinates based coupled code system TORT-TD/ATTICA3D and its application to HTGR of pebble bed type. TORT-TD/ATTICA3D is represented by a single executable and adapts the so-called internal coupling approach. Three-dimensional distributions of temperatures from ATTICA3D and power density from TORT-TD are efficiently exchanged by direct memory access of array elements via interface routines. Applications of TORT-TD/ATTICA3D to three transients based on the PBMR-400 benchmark (total and partial control rod withdrawal and cold helium ingress) and the full power steady state of the HTR-10 are presented. For the partial control rod withdrawal, 3-D effects of local neutron flux redistributions are clearly identified. The results are very promising and demonstrate that the coupled code system TORT-TD/ATTICA3D may represent a key component in a future comprehensive 3-D code system for HTGR of pebble bed type. (orig.)

The Association Analysis between ACE and ACTN3 Genes Polymorphisms and Endurance Capacity in Young Cross-Country Skiers: Longitudinal Study

Directory of Open Access Journals (Sweden)

Agnes Mägi, Eve Unt, Ele Prans, Liina Raus, Jaan Eha, Alar Veraksitš, Külli Kingo, Sulev Kõks

2016-06-01

Full Text Available Endurance performance depends on the integration of several phenotypic traits influenced by multiple environmental and genetic factors. Objectives of the study were: (1 to examine the genotypic frequencies of the ACE I/D, ACTN3 R577X polymorphisms and endurance performance-related phenotypes, (2 to evaluate the dynamics of endurance performance parameters during a 5-year period in relation to ACE I/D and ACTN3 R577X genotypes in Estonian young skiers. Determination of VO2peak was performed in 58 skiers aged 15-19 years (41 males, 17 females during a 5-year period. The control group consisted of 322 healthy non-athletic subjects (145 males, 177 females. The study groups were genotyped for the ACE I/D and ACTN3 R577X variants. Frequencies of the ACE ID and ACTN3 RR genotypes were significantly higher (p = 0.047 and p = 0.003, respectively and the RX genotype was lower (p = 0.008 in young male skiers compared with controls. A significant relationship was found between change (Δ of training volume and ΔVO2peak (mL·kg-1·min-1 (r = 0.475, p = 0.002. No significant main effect was detected between VO2peak (mL·kg-1·min-1 dynamics (comparison with the previous age group data and ACE I/D and ACTN3 R577X genotypes interactions (F = 0.571, p = 0.770 and F = 0.650 and p = 0.705, respectively in all young skiers. Study results indicated a significantly higher frequency of the ACE ID and ACTN3 RR genotypes among Estonian young male skiers compared with the male control group. Significant genotype-related differences in dynamics of VO2peak during a 5-year period were not found. In the future, longitudinal research including different gene variants may contribute to a better understanding of the nature of endurance performance.

Neutron energy spectra of sup 2 sup 5 sup 2 Cf, Am-Be source and of the D(d,n) sup 3 He reaction

CERN Document Server

Sang Tae Park

2003-01-01

The neutron energy spectrum of the following sources were measured using a fast neutron spectrometer with the NE-213 liquid scintillator: sup 2 sup 5 sup 2 Cf, Am-Be and D(d,n) sup 3 He reaction from a 3 MeV Pelletron accelerator in Tokyo Institute of Technology. The measured proton recoil pulse height data of sup 2 sup 5 sup 2 Cf, Am-Be and D(d,n) sup 3 He were unfolded using the mathematical program to obtain the neutron energy spectrum. The sup 2 sup 5 sup 2 Cf and Am-Be neutron energy spectra were measured and the results obtained showed a good agreement with the spectra usually published in the literature. The neutron energy spectrum from D(d,n) sup 3 He was measured and the results obtained also showed a good agreement with the calculation by time of flight (TOF) methods. (author)

Computation of 3D neutron fluxes in one pin hexagonal cell

International Nuclear Information System (INIS)

Prabha, Hem; Marleau, Guy

2013-01-01

Highlights: ► Computations of 3D neutron fluxes in one pin hexagonal cell is performed by Carlvik’s method of collision probability. ► Carlvik’s method requires computation of track lengths in the geometry. ► Equations are developed to compute tracks, in 2D and 3D, in hexagons and are implemented in a program HX7. ► The program HX7 is implemented in NXT module of the code DRAGON, where tracks in pins are computed. ► The tracks are plotted and fluxes are compared with the EXCELT module of the code DRAGON. - Abstract: In this paper we are presenting the method of computation of three dimensional (3D) neutron fluxes in one pin hexagonal cell. Carlvik’s collision probability method of solving neutron transport equation for computing fluxes has been used here. This method can consider exact geometrical details of the given geometry. While using this method, track length computations are required to be done. We have described here the method of computing tracks in one 3D hexagon. A program HX7 has been developed for this purpose. This program has been implemented in the NXT module of the code DRAGON, where tracks in the pins are computed. For computing tracks in 3D, first we use the tracks computed in the two dimensions (2D) and then we project them in the third dimension. We have developed equations for this purpose. In both the regions, fuel pin as well as in the moderator surrounding the pin the fluxes are assumed to be uniform. A uniform source is assumed in the moderator region. Reflecting boundary conditions are applied on all the sides as well as on the top and bottom surfaces. One group 2D and 3D fluxes are compared with the respective results obtained by the EXCELT module of DRAGON. To check the computations, tracks are plotted and errors in the computations are obtained. It is observed by using both the modules EXCELT and NXT that the fluxes in the pins converge faster and in the moderator region fluxes converge very slowly

3-D steady analysis of flow in CRDM sewerage system

International Nuclear Information System (INIS)

Sun Yan; Liang Tiebo; Chen Zhihui; Zhao Jing; Zhang Yulong

2014-01-01

In order to obtain the flow state during sewer condition in Reactor and CRDM Sewerage system (RSE), this paper analyzes the 3-D steady flow in RSE by using Computational Fluid Dynamics (CFD) method. In the premise that the pressure drop of the RSE is known, the mass flow rate, the velocity and the type of flow in the system is obtained with the inverse method, which is proposed and validated to be applicable in the paper. The result shows that in the sewerage conditions, the type of flow in the RSE is turbulence flow, which is helpful to sewer drain. The study results give an reference for the design of RSE. (authors)

The Association Analysis between ACE and ACTN3 Genes Polymorphisms and Endurance Capacity in Young Cross-Country Skiers: Longitudinal Study.

Science.gov (United States)

Mägi, Agnes; Unt, Eve; Prans, Ele; Raus, Liina; Eha, Jaan; Veraksitš, Alar; Kingo, Külli; Kõks, Sulev

2016-06-01

Endurance performance depends on the integration of several phenotypic traits influenced by multiple environmental and genetic factors. Objectives of the study were: (1) to examine the genotypic frequencies of the ACE I/D, ACTN3 R577X polymorphisms and endurance performance-related phenotypes, (2) to evaluate the dynamics of endurance performance parameters during a 5-year period in relation to ACE I/D and ACTN3 R577X genotypes in Estonian young skiers. Determination of VO2peak was performed in 58 skiers aged 15-19 years (41 males, 17 females) during a 5-year period. The control group consisted of 322 healthy non-athletic subjects (145 males, 177 females). The study groups were genotyped for the ACE I/D and ACTN3 R577X variants. Frequencies of the ACE ID and ACTN3 RR genotypes were significantly higher (p = 0.047 and p = 0.003, respectively) and the RX genotype was lower (p = 0.008) in young male skiers compared with controls. A significant relationship was found between change (Δ) of training volume and ΔVO2peak (mL·kg(-1)·min(-1)) (r = 0.475, p = 0.002). No significant main effect was detected between VO2peak (mL·kg(-1)·min(-1)) dynamics (comparison with the previous age group data) and ACE I/D and ACTN3 R577X genotypes interactions (F = 0.571, p = 0.770 and F = 0.650 and p = 0.705, respectively) in all young skiers. Study results indicated a significantly higher frequency of the ACE ID and ACTN3 RR genotypes among Estonian young male skiers compared with the male control group. Significant genotype-related differences in dynamics of VO2peak during a 5-year period were not found. In the future, longitudinal research including different gene variants may contribute to a better understanding of the nature of endurance performance. Key pointsSignificantly higher prevalence of the ACE ID and the ACTN3 RR genotypes were found among Estonian young male skiers compared with the male control group, which may be an advantage for the explosive speed and power

Development of compact D-D neutron generator

International Nuclear Information System (INIS)

Das, Basanta Kumar; Das, Rashmita; Shyam, Anurag

2011-12-01

In recent years, due to specific features of compact neutron generators, their demand in elemental analysis and detection of the illicit materials has been increased in scientific community. Compact is size, controlled operation and radiation safety like features of neutron generator is suitable for research work with illicit materials. An accelerator based neutron generator can be operated in steady mode as well as in pulse mode. The main embodiment of this type of generator includes ion source, ion acceleration system and target. We are developing such type of neutron generator. This consists of one-in-house developed penning ion source, a single electrode acceleration gap and one deuterated titanium target or virgin titanium target. In this report, we will discuss various physics and technical issues related to the important components of this generator, operation of the generator and neutron detection. (author)

D-D neutron generator development at LBNL.

Science.gov (United States)

Reijonen, J; Gicquel, F; Hahto, S K; King, M; Lou, T-P; Leung, K-N

2005-01-01

The plasma and ion source technology group in Lawrence Berkeley National Laboratory is developing advanced, next generation D-D neutron generators. There are three distinctive developments, which are discussed in this presentation, namely, multi-stage, accelerator-based axial neutron generator, high-output co-axial neutron generator and point source neutron generator. These generators employ RF-induction discharge to produce deuterium ions. The distinctive feature of RF-discharge is its capability to generate high atomic hydrogen species, high current densities and stable and long-life operation. The axial neutron generator is designed for applications that require fast pulsing together with medium to high D-D neutron output. The co-axial neutron generator is aimed for high neutron output with cw or pulsed operation, using either the D-D or D-T fusion reaction. The point source neutron generator is a new concept, utilizing a toroidal-shaped plasma generator. The beam is extracted from multiple apertures and focus to the target tube, which is located at the middle of the generator. This will generate a point source of D-D, T-T or D-T neutrons with high output flux. The latest development together with measured data will be discussed in this article.

Prevalence of alpha actinin-3 gene (ACTN3) R577X and angiotensin converting enzyme (ACE) insertion / deletion gene polymorphisms in national and amateur Turkish athletes.

Science.gov (United States)

Eroğlu, Onur; Zileli, Rayif; Nalbant, M Ali; Ulucan, Korkut

2018-04-30

Studies to date showed the importance of alpha- actinin-3 (ACTN3) R577X and angiotensin converting enzyme (ACE) ID polymorphisms on determining athletic performance. Therefore, in this study, we aimed to examine polymorphisms given to Turkish athletes and compare them with sedentary individuals. Genomic DNAs were extracted from peripheral blood by using commercially available DNA isolation kit (Macherey-Nagel, NucleoSpin®, Germany). For this study, a total of 84 volunteers (23 national athletes, 27 amateur athletes and 34 sedentary controls) was recruited.  ACE ID genotypes were determined by conventional polymerase chain reaction, and ACTN3 R577X polymorphisms by polymerase chain reaction- restriction fragment length polymorphism methodology.   In ACTN3 R577X polymorphism, RX was the dominating genotype, and we detected no RR genotype in national athletes. (no RR genotype was detected in national athletes) X allele is more frequent in national athletes and R allele was more frequent in both amateur athletes and control group. II genotype was more frequent in national athletes and in control group, whereas DD genotype was more frequent in amateur athletes for ACE ID polymorphism. When we consider alleles, D allele was found more frequently in amateur athletes and control group whereas I allele was more frequent in national athletes in ACE ID polymorphism. For ACTN3, X allele was superior to R allele. ACTN3 R577X and ACE ID polymorphisms were important biomarkers in determining athletic performance. However, our results in Turkish athletes suggest that ACE D allele and ACTN3 X alleles may be beneficial to athletes potentially, regardless of the distance they perform.

The importance of association between angiotensin-converting enzyme (ACE) Gene I/D polymorphism and diabetic peripheral neuropathy.

Science.gov (United States)

Inanir, Ahmet; Basol, Nursah; Karakus, Nevin; Yigit, Serbulent

2013-11-10

Diabetic peripheral neuropathy (DPN) is a microvascular complication of diabetes mellitus (DM) due to decreasing quality of life. In the present study, it is aimed to evaluate angiotensin-converting enzyme (ACE) Gene I/D polymorphism in Turkish population. Two hundred and thirty-five DPN patients and two hundred and eighty-one controls were enrolled in this study. Genomic DNA was isolated and genotyped using polymerase chain reaction (PCR) analyses for the ACE gene I/D polymorphism. Baseline characteristics of the DPN patients according to ACE genotypes were similar, except for history of hypertension. The frequency of II genotype was significantly higher in patients with positive history of hypertension than the patients with negative history of hypertension (p=0.013). DD genotype of I/D polymorphism was found to be a susceptibility factor for DPN in homozygous form (p=0.032). According to allele frequencies, D allele of I/D polymorphism was found to be a susceptibility factor for DPN (p=0.031). ACE gene I/D polymorphism may research in DM patients to determine genetic predisposition for DPN. It can be useful for taking early measures and avoiding DPN in a Turkish population. © 2013 Elsevier B.V. All rights reserved.

Coupling calculation of CFD-ACE computational fluid dynamics code and DeCART whole-core neutron transport code for development of numerical reactor

Energy Technology Data Exchange (ETDEWEB)

Shin, Chang Hwan; Seo, Kyong Won; Chun, Tae Hyun; Kim, Kang Seog

2005-03-15

Code coupling activities have so far focused on coupling the neutronics modules with the CFD module. An interface module for the CFD-ACE/DeCART coupling was established as an alternative to the original STAR-CD/DeCART interface. The interface module for DeCART/CFD-ACE was validated by single-pin model. The optimized CFD mesh was decided through the calculation of multi-pin model. It was important to consider turbulent mixing of subchannels for calculation of fuel temperature. For the parallel calculation, the optimized decompose process was necessary to reduce the calculation costs and setting of the iteration and convergence criterion for each code was important, too.

Coupling calculation of CFD-ACE computational fluid dynamics code and DeCART whole-core neutron transport code for development of numerical reactor

International Nuclear Information System (INIS)

Shin, Chang Hwan; Seo, Kyong Won; Chun, Tae Hyun; Kim, Kang Seog

2005-03-01

Code coupling activities have so far focused on coupling the neutronics modules with the CFD module. An interface module for the CFD-ACE/DeCART coupling was established as an alternative to the original STAR-CD/DeCART interface. The interface module for DeCART/CFD-ACE was validated by single-pin model. The optimized CFD mesh was decided through the calculation of multi-pin model. It was important to consider turbulent mixing of subchannels for calculation of fuel temperature. For the parallel calculation, the optimized decompose process was necessary to reduce the calculation costs and setting of the iteration and convergence criterion for each code was important, too

Small-angle scattering at a pulsed neutron source: comparison with a steady-state reactor

Energy Technology Data Exchange (ETDEWEB)

Borso, C S; Carpenter, J M; Williamson, F S; Holmblad, G L; Mueller, M H; Faber, J Jr; Epperson, J E; Danyluk, S S [Argonne National Lab., IL (USA)

1982-08-01

A time-of-flight small-angle diffractometer employing seven tapered collimator elements and a two-dimensional gas proportional counter was successfully utilized to collect small-angle scattering data from a solution sample of the lipid salt cetylpyridinium chloride, C/sub 21/H/sub 38/N/sup +/.Cl/sup -/, at the Argonne National Laboratory prototype pulsed spallation neutron source, ZING-P'. Comparison of the small-angle scattering observed from the same compound at the University of Missouri Research Reactor corroborated the ZING-P' results. The results are used to compare the neutron flux available from the ZING-P' source relative to the well characterized University of Missouri source. Calculations based on experimentally determined parameters indicated the time-averaged rate of detected neutrons at the ZING-P' pulsed spallation source to have been at least 33% higher than the steady-state count rate from the same sample. Differences between time-of-flight techniques and conventional steady-state techniques are discussed.

Fission multipliers for D-D/D-T neutron generators

International Nuclear Information System (INIS)

Lou, T.P.; Vujic, J.L.; Koivunoro, H.; Reijonen, J.; Leung, K.-N.

2003-01-01

A compact D-D/D-T fusion based neutron generator is being designed at the Lawrence Berkeley National Laboratory to have a potential yield of 10 12 D-D n/s and 10 14 D-T n/s. Because of its high neutron yield and compact size (∼20 cm in diameter by 4 cm long), this neutron generator design will be suitable for many applications. However, some applications required higher flux available from nuclear reactors and spallation neutron sources operated with GeV proton beams. In this study, a subcritical fission multiplier with k eff of 0.98 is coupled with the compact neutron generators in order to increase the neutron flux output. We have chosen two applications to show the gain in flux due to the use of fission multipliers--in-core irradiation and out-of-core irradiation. For the in-core irradiation, we have shown that a gain of ∼25 can be achieved in a positron production system using D-T generator. For the out-of-core irradiation, a gain of ∼17 times is obtained in Boron Neutron Capture Therapy (BNCT) using a D-D neutron generator. The total number of fission neutrons generated by a source neutron in a fission multiplier with k eff is ∼50. For the out-of-core irradiation, the theoretical maximum net multiplication is ∼30 due to the absorption of neutrons in the fuel. A discussion of the achievable multiplication and the theoretical multiplication will be presented in this paper

Exploring the Link between ACE Insertion/Deletion (I/D Polymorphism and Uterine Leiomyomas

Directory of Open Access Journals (Sweden)

Shirin Shahbazi

2017-03-01

Full Text Available Introduction: Uterine leiomyomas arise from the proliferation of smooth muscle cells. ACE gene encodes a convertase enzyme mainly secreted in vascular endothelial cells which is involved in the renin–angiotensin system and blood pressure controlling. This gene has an insertion/deletion (I/D polymorphism correlates to serum and tissue ACE levels. The aim of this study is to elucidate the relationship between ACE gene variation and the development of myom. Methods: The samples of 55 uterine leiomyoma patients and 78 healthy women were studied. After obtaining informed consent, blood samples were collected and DNA extraction was performed by Salting-out method. Genotyping was performed using PCR reaction. The amplified products were two bands of 190 and 490 bp, which represents D allele and I allele, respectively. Statistical analysis was done using Chi-square test. Results: The D allele frequency was 0.55 in the patient group and 0.51 in the control group. The I allele frequencies in the two groups were 0.45 and 0.49, respectively. The results showed that taking the II genotype into account as reference genotype; homozygous DD individuals were at increased risk of uterine myoma (Odds ratio: 1.37. However, heterozygous ID showed a similar risk with the II genotype as the reference group. Conclusion: High blood pressure is significantly associated with uterine fibroids. It has been shown that atherosclerotic damage of uterine blood vessels and the inflammatory process caused by it may play an important role in the development of uterine myoma. This study indicates a positive relationship between the ACE (I/D polymorphism and the risk of uterine myoma. This finding is evidence of the important role of the renin–angiotensin system in the pathogenesis of myoma

Steady state investigation on neutronics of a molten salt reactor considering the flow effect of fuel salt

International Nuclear Information System (INIS)

Zhang Dalin; Qiu Suizheng; Su Guanghui; Liu Changliang

2008-01-01

The Molten Salt Reactor (MSR), one of the 'Generation IV' concepts, is a liquid-fuel reactor, which is different from the conventional reactors using solid fissile materials due to the flow effect of fuel salt. The study on its neutronics considering the fuel salt flow, which is the base of the thermal-hydraulic calculation and safety analysis, must be done. In this paper, the theoretical model on neutronics under steady condition for a single-liquid-fueled MSR is conducted and calculated by numerical method. The neutronics model consists of two group neutron diffusion equations for fast and thermal neutron fluxes, and balance equations for six-group delayed neutron precursors considering the flow effect of fuel salt. The spatial discretization of the above models is based on the finite volume method, and the discretization equations are computed by the source iteration method. The distributions of neutron fluxes and the distributions of the delayed neutron precursors in the core are obtained. The numerical calculated results show that, the fuel salt flow has little effect on the distribution of fast and thermal neutron fluxes and the effective multiplication factor; however, it affects the distribution of the delayed neutron precursors significantly, especially the long-lived one. In addition, it could be found that the delayed neutron precursors influence the neutronics slightly under the steady condition. (authors)

Verification of SIGACE code for generating ACE format cross-section files with continuous energy at high temperature

International Nuclear Information System (INIS)

Li Zhifeng; Yu Tao; Xie Jinsen; Qin Mian

2012-01-01

Based on the recently released ENDF/B-VII. 1 library, high temperature neutron cross-section files are generated through SIGACE code using low temperature ACE format files. To verify the processed ACE file of SIGACE, benchmark calculations are performed in this paper. The calculated results of selected ICT, standard CANDU assembly, LWR Doppler coefficient and SEFOR benchmarks are well conformed with reference value, which indicates that high temperature ACE files processed by SIGACE can be used in related neutronics calculations. (authors)

ACE Gene in Egyptian Ischemic Stroke Patients.

Science.gov (United States)

Mostafa, Magdy A; El-Nabiel, Lobna M; Fahmy, Nagia Aly; Aref, Hany; Shreef, Edrees; Abd El-Tawab, Fathy; Abdulghany, Osama M

2016-09-01

Angiotensin-1-converting enzyme (ACE) is a crucial player in vascular homeostasis and in the pathogenesis of atherosclerosis and hypertension. The present study was conducted to determine whether there is an association between the ACE insertion/deletion (I/D) polymorphism and ischemic stroke in Egyptian population. Also, we analyzed the ACE gene I/D polymorphism as a risk factor for small-vessel (SV) versus large-vessel (LV) disease. Sixty patients with ischemic stroke were included: 30 with SV disease and 30 with LV disease. In addition, a control group of 30 apparent healthy subjects were studied. Clinical assessment, computed tomography, magnetic resonance imaging brain, and genetic study using the polymerase chain reaction of ACE gene were done for all subjects. We found that the distribution of ACE gene polymorphism frequency was significantly different between the 3 groups. The DD genotype was far more common in stroke patients compared to controls. It was also significantly more common in each of the patient groups compared to controls but rather similar in the 2 patient groups with SV and LV diseases. We found that the ACE gene deletion/deletion genotype is common in Egyptian patients with non-cardioembolic ischemic stroke but does not appear to be specific neither to SV nor to LV disease. Copyright © 2016 National Stroke Association. Published by Elsevier Inc. All rights reserved.

The importance of using the mixed neutron flux in activation analysis of D-3He fueled reactors

International Nuclear Information System (INIS)

Khater, H.Y.; Sawan, M.E.

1992-01-01

This paper reports on the D-D and D-T secondary reactions in D- 3 He reactors which provide the neutron source term for most of the radioactivity produced in the structure of the reactor. radionuclides are produced as a result of neutron interactions with their parent nuclides. The amount of activity produced by any radionuclide depends on the number of its parent atoms present at any given time. One approach to account for the activity induced by both neutron sources in any activation analysis is to add their individual contributions. Performing two separate calculations for the D-D and D-T neutron flux components and adding their contributions yields conservative results due to underestimating the destruction of the parent atoms. The overestimation is more pronounced for short and intermediate lived nuclides, long operation time, large neutron flux and large destruction cross section for the parent atoms. In the steel first wall of a typical d- 3 He reactor, adding the individual contributions of the tow neutron sources results in overestimating the activities produced by most of the radioactive isotopes of Ag, Lu, Ta, W and Re. After 30 years of reactor operation, the activity of 187 W, which is a major source of safety concern in case of an accident, is more than an order of magnitude higher than its value if the mixed neutron flux is used. The activity of 188 Re, which is an important source of offsite does in case of accidental release, is overestimated by more than a factor of two

Additive Construction with Mobile Emplacement (ACME) / Automated Construction of Expeditionary Structures (ACES) Materials Delivery System (MDS)

Science.gov (United States)

Mueller, R. P.; Townsend, I. I.; Tamasy, G. J.; Evers, C. J.; Sibille, L. J.; Edmunson, J. E.; Fiske, M. R.; Fikes, J. C.; Case, M.

2018-01-01

The purpose of the Automated Construction of Expeditionary Structures, Phase 3 (ACES 3) project is to incorporate the Liquid Goods Delivery System (LGDS) into the Dry Goods Delivery System (DGDS) structure to create an integrated and automated Materials Delivery System (MDS) for 3D printing structures with ordinary Portland cement (OPC) concrete. ACES 3 is a prototype for 3-D printing barracks for soldiers in forward bases, here on Earth. The LGDS supports ACES 3 by storing liquid materials, mixing recipe batches of liquid materials, and working with the Dry Goods Feed System (DGFS) previously developed for ACES 2, combining the materials that are eventually extruded out of the print nozzle. Automated Construction of Expeditionary Structures, Phase 3 (ACES 3) is a project led by the US Army Corps of Engineers (USACE) and supported by NASA. The equivalent 3D printing system for construction in space is designated Additive Construction with Mobile Emplacement (ACME) by NASA.

Small-angle neutron polarization for the 2H(d vector,n vector)3He reaction near Esub(d) = 8MeV

International Nuclear Information System (INIS)

Tornow, W.; Woye, W.; Mack, G.

1981-01-01

Considerable improvement in the quality of analyzing power experiments performed with polarized fast neutrons has been achieved during the last few years by using neutrons from the polarization transfer reaction 2 H(d vector,n vector) 3 He at a reaction angle of theta = 0 0 . To compromise in these experiments between intensity problems and finite geometry corrections, it is desirable in some instances to subtend a full-width angle Δtheta of 20 0 (lab) centered about theta = 0 0 . In order to investigate the suitability of this reaction as a source of polarized neutrons for cases where the scatterer is close to the neutron source, the neutron polarization of the reaction 2 H(d vector,n vector) 3 He has been studied with Δtheta of about 3 0 in 3 0 steps out to theta = 20 0 (lab). An incident deuteron energy near 8 MeV was chosen to yield outgoing neutrons at 11.0 MeV, a typical energy for neutron analyzing power experiments. It is found that the effective neutron polarization, a combination of the two polarizations measured when the direction of the deuteron polarization is inverted or flipped at the polarized ion source, is large and nearly constant for angles between theta = 0 0 and theta = 10 0 (lab). (orig.)

Association of ACE Gene I/D polymorphism with migraine in Kashmiri population.

Science.gov (United States)

Wani, Irfan Yousuf; Sheikh, Saleem; Shah, Zafar Amin; Pandith, Arshid A; Wani, Mushtaq; Asimi, Ravouf; Wani, Maqbool; Sheikh, Shahnawaz; Mehraj, Iqra

2016-01-01

Migraine is a complex, recurrent headache disorder that is one of the most common complaints in neurology practice. The role of various genes in its pathogenesis is being studied. We did this study to see whether an association exists between ACE gene I/D polymorphism and migraine in our region. The study included 100 patients diagnosed with migraine and 121 healthy controls. The study subject were age and gender matched. The analysis was based on Polymerase Chain Reaction (PCR) and included following steps: DNA extraction from blood, PCR and Restriction Fragment Length Polymorphism (RFLP). Out of 100 cases, 69 were females and 31 were males. Fifty-seven were having migraine without aura and 43 had migraine with aura. 45 of the cases had II polymorphism, 40 had ID polymorphism and 15 had DD polymorphism in ACE gene. We were not able to find a statistically significant association between ACE gene I/D polymorphism with migraine. The reason for difference in results between our study and other studies could be because of different ethnicity in study populations. So a continuous research is needed in this regard in order to find the genes and different polymorphism that increase the susceptibility of Kashmiri population to migraine.

Steady state investigation on neutronics of a molten salt reactor considering the flow effect of fuel salt

Institute of Scientific and Technical Information of China (English)

ZHANG Da-Lin; QIU Sui-Zheng; LIU Chang-Liang; SU Guang-Hui

2008-01-01

The Molten Salt Reactor (MSR),one of the‘Generation Ⅳ'concepts,is a liquid-fuel reactor,which is different from the conventional reactors using solid fissile materials due to the flow effect of fuel salt.The study on its neutronice considering the fuel salt flow,which is the base of the thermal-hydraulic calculation and safety analysis,must be done.In this paper,the theoretical model on neutronics under steady condition for a single-liquid-fueled MSR is conducted and calculated by numerical method.The neutronics model consists of two group neutron diffusion equations for fast and thermal neutron fluxes,and balance equations for six-group delayed neutron precursors considering the flow effect of fuel salt. The spatial discretization of the above models is based on the finite volume method,and the discretization equations are computed by the source iteration method.The distributions of neutron fluxes and the distributions of the delayed neutron precursors in the core are obtained.The numerical calculated results show that,the fuel salt flow has little effect on the distribution of fast and thermal neutron fluxes and the effective multiplication factor;however,it affects the distribution of the delayed neutron precursors significantly,especially the long-lived one.In addition,it could be found that the delayed neutron precursors influence the nentronics slightly under the steady condition.

Comparison of neutron fluxes obtained by 2-D and 3-D geometry with different shielding libraries in biological shield of the TRIGA MARK II reactor

International Nuclear Information System (INIS)

Bozic, M.; Zagar, T.; Ravnik, M.

2003-01-01

Neutron fluxes in different spatial locations in biological shield are obtained with TORT code (TORT-Three Dimensional Oak Ridge Discrete Ordinates Neutron/Photon Transport Code). Libraries used with TORT code were BUGLE-96 library (coupled library with 47 neutron groups and 20 gamma groups) and VITAMIN-B6 library (coupled library with 199 neutron groups and 42 gamma groups). BUGLE-96 library is derived from VITAMIN-B6 library. 2-D and 3-D models for homogeneous type of problem (without inserted beam port 4) and problem with asymmetry (non-homogeneous problem; inserted beam port 4, filled with different materials) were of interest for neutron flux calculation. The main purpose is to verify the possibility for using 2-D approximation model instead of large 3-D model in some calculations. Another purpose of this paper was to compare neutron spectral constants obtained from neutron fluxes (3-D model) determined with smaller BUGLE-96 library with new constants obtained from fluxes calculated with bigger VITAMIN-B6 library. These neutron spectral constants are used in isotopic calculation with SCALE code package (ORIGEN-S). In past only neutron spectral constants determined by neutron fluxes from BUGLE-96 library were used. Experimental results used for isotopic composition comparison are available from irradiation experiment with selected type of concrete and other materials in beam port 4 (irradiation channel 4) in TRIGA Mark II reactor. These experimental results were used as a benchmark in this paper. (author)

Development of a D-D Neutron Generator

International Nuclear Information System (INIS)

Kim, In Jung; Jung, Hwa Dong; Park, Chang Su; Jung, Nam Suk; Jung, Soon Wook; Hwang, Y. S.; Choi, H. D.

2007-01-01

To enhance neutron yield, the ion source of the D-D neutron generator is replaced by a large current helicon plasma ion source. Current and energy of deuteron beam are increased, and hence neutron yield is enhanced. The maximum neutron yield is 2x10 8 n/s

Cement analysis using d + D neutrons

International Nuclear Information System (INIS)

Womble, Phillip C.; Paschal, Jon; Moore, Ryan

2005-01-01

In the cement industry, the primary concern is quality control. The earlier the cement industry can institute quality control upon their product, the more significant their savings in labor, energy and material. We are developing a prototype cement analyzer using pulsed neutrons from a d-D electronic neutron generator with the goal of ensuring quality control of cement in an on-line manner. By utilizing a low intensity d-D neutron source and a specially-designed moderator assembly, we are able to produce one of the safest neutron-based systems in the market. Also, this design includes some exciting new methods of data acquisition which may substantially reduce the final installation costs. In our proof-of-principle measurements, we were able to measure the primary components of cement (Al, Si, Ca and Fe) to limits required for the raw materials, the derived mixes and the clinkers utilizing this neutron generator

The PAI-1 4G/5G and ACE I/D polymorphisms and risk of recurrent pregnancy loss: a case-control study.

Science.gov (United States)

Kim, Jin Ju; Choi, Young Min; Lee, Sung Ki; Yang, Kwang Moon; Paik, Eun Chan; Jeong, Hyeon Jeong; Jun, Jong Kwan; Han, Ae Ra; Hong, Min A

2014-12-01

Thrombophilia has been postulated to be a contributor to the pathophysiology of recurrent pregnancy loss (RPL). We investigated the role of the plasminogen activator inhibitor type 1 (PAI-1) 4G/5G and angiotensin converting enzyme (ACE) I/D polymorphisms in Korean patients with RPL. Genotyping was performed using the TaqMan assay in 227 RPL patients and 304 controls. The genotype distributions of both polymorphisms in the RPL group did not differ from those of controls. Because the frequency of being homozygous for ACE D/D and the PAI-I 4G/4G combination has been reported to be significantly higher in RPL patients, this was also analyzed. However, no significant difference was noted; 3.1% of RPL patients had both ACE D/D and PAI-I 4G/4G, as did 4.9% of controls (P = 0.791). The current study suggests that both polymorphisms, either alone or in combination, are not major determinants of the development of RPL in Korean women. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Evaluation of whether the ACE gene I/D polymorphism constitutes a risk factor for chronic obstructive pulmonary disease in the Turkish population.

Science.gov (United States)

Ayada, C; Toru, U; Genç, O; Yerlikaya, A; Sahin, S; Turgut, S; Turgut, G

2014-12-12

Chronic obstructive pulmonary disease (COPD) is characterized by progressive airflow obstruction that occurs as a result of the normal inflammatory process to protect against harmful irritants and chemicals. Another physiological regulatory process, the renin angiotensin system (RAS), plays an important role in the pathology of many diseases. Angiotensin converting enzyme (ACE) is a key enzyme of RAS. We investigated the frequency of the ACE gene I/D polymorphism in patients with COPD in Turkey. This study was performed on 47 unrelated patients with COPD and 64 healthy subjects. DNA samples were isolated from peripheral blood, and ACE DNA was amplified by polymerase chain reaction. The frequencies of ACE genotypes were 27.7, 55.3, and 17% for DD, ID, and II in the COPD group, respectively, and 43.8, 43.8, and 12.4% in the control group. There was no statistically significant difference between groups (X(2) = 3.078; df = 2; P = 0.220). The distributions of ACE gene D alleles were 38.2% (N = 52) in the COPD group and 61.8% (N = 84) in the control group; and those of I alleles were 48.8% (N = 42) in the COPD group and 51.2% (N = 44) in the control group. There was no statistically significant difference between groups for allele frequency (X(2) = 2.419; df = 2; P = 0.120). We believe these results can be useful for large-scale population genetic research considering the frequency of the ACE gene variation in COPD patients in the Turkish population.

Polarized ³He Neutron Spin Filters

Energy Technology Data Exchange (ETDEWEB)

Sno, William Michael [Indiana Univ., Bloomington, IN (United States)

2016-01-12

The goal of this grant to Indiana University and subcontractors at Hamilton College and Wisconsin and the associated Interagency Agreement with NIST was to extend the technique of polarized neutron scattering by the development and application of polarized ³He-based neutron spin filters. This effort was blessed with long-term support from the DOE Office of Science, which started in 2003 and continued until the end of a final no-cost extension of the last 3-year period of support in 2013. The steady support from the DOE Office of Science for this long-term development project was essential to its eventual success. Further ³He neutron spin filter development is now sited at NIST and ORNL.

ACE I/D Gene Polymorphism Can't Predict the Steroid Responsiveness in Asian Children with Idiopathic Nephrotic Syndrome: A Meta-Analysis

Science.gov (United States)

Su, Li-Na; Lei, Feng-Ying; Huang, Wei-Fang; Zhao, Yan-Jun

2011-01-01

Background The results from the published studies on the association between angiotensin-converting enzyme (ACE) insertion/deletion (I/D) gene polymorphism and the treatment response to steroid in Asian children with idiopathic nephrotic syndrome (INS) is still conflicting. This meta-analysis was performed to evaluate the relation between ACE I/D gene polymorphism and treatment response to steroid in Asian children and to explore whether ACE D allele or DD genotype could become a predictive marker for steroid responsiveness. Methodology/Principal Findings Association studies were identified from the databases of PubMed, Embase, Cochrane Library and CBM-disc (China Biological Medicine Database) as of September 1, 2010, and eligible investigations were synthesized using meta-analysis method. Five investigations were identified for the analysis of association between ACE I/D gene polymorphism and steroid-resistant nephrotic syndrome (SRNS) risk in Asian children and seven studies were included to explore the relationship between ACE I/D gene polymorphism and steroid-sensitive nephrotic syndrome (SSNS) susceptibility. Five investigations were recruited to explore the difference of ACE I/D gene distribution between SRNS and SSNS. There was no a markedly association between D allele or DD genotype and SRNS susceptibility or SSNS risk, and the gene distribution differences of ACE between SRNS and SSNS were not statistically significant. II genotype might play a positive role against SRNS onset but not for SSNS (OR = 0.51, P = 0.02; OR = 0.95, P = 0.85; respectively), however, the result for the association of II genotype with SRNS risk was not stable. Conclusions/Significance Our results indicate that D allele or DD homozygous can't become a significant genetic molecular marker to predict the treatment response to steroid in Asian children with INS. PMID:21611163

DD Genotype of ACE I/D Polymorphism Might Confer Protection against Dental Caries in Polish Children.

Science.gov (United States)

Olszowski, Tomasz; Adler, Grażyna; Janiszewska-Olszowska, Joanna; Safranow, Krzysztof; Chlubek, Dariusz

2015-01-01

The aim of the study was to examine the frequencies of the genotypes and alleles of ACE insertion/deletion (I/D) polymorphism and their association with dental caries in a sample of Polish children. The study subjects were 120 children with dental caries experience (cases) and 41 caries-free individuals (controls). The genotyping was performed using polymerase chain reaction. The genotype distributions of ACE I/D polymorphism were not statistically different between carious and control children. However, we found a borderline overrepresentation of the II + ID genotypes versus the DD genotype in the carious compared to the control group (69.2% and 51.2%, respectively, p = 0.057). Logistic regression analysis adjusted for age and sex revealed that I allele carriage was a significant predictor of dental caries susceptibility (OR = 2.14, 95% CI = 1.02-4.49, p = 0.041). In conclusion, the DD genotype of ACE I/D polymorphism might be protective against dental caries in Polish children. © 2015 S. Karger AG, Basel.

SNAP-3D: a three-dimensional neutron diffusion code

International Nuclear Information System (INIS)

McCallien, C.W.J.

1975-10-01

A preliminary report is presented describing the data requirements of a one- two- or three-dimensional multi-group diffusion code, SNAP-3D. This code is primarily intended for neutron diffusion calculations but it can also carry out gamma calculations if the diffuse approximation is accurate enough. It is suitable for fast and thermal reactor core calculations and for shield calculations. It is assumed the reader is familiar with the older, two-dimensional code SNAP and can refer to the report [TRG-Report-1990], describing it. The present report concentrates on the enhancements to SNAP that have been made to produce the three-dimensional version, SNAP-3D, and is intended to act a a guide on data preparation until a single, comprehensive report can be published. (author)

GAMSOR: Gamma Source Preparation and DIF3D Flux Solution

Energy Technology Data Exchange (ETDEWEB)

Smith, M. A. [TerraPower, Bellevue, WA (United States); Lee, C. H. [TerraPower, Bellevue, WA (United States); Hill, R. N. [TerraPower, Bellevue, WA (United States)

2017-06-28

Nuclear reactors that rely upon the fission reaction have two modes of thermal energy deposition in the reactor system: neutron absorption and gamma absorption. The gamma rays are typically generated by neutron capture reactions or during the fission process which means the primary driver of energy production is of course the neutron interaction. In conventional reactor physics methods, the gamma heating component is ignored such that the gamma absorption is forced to occur at the gamma emission site. For experimental reactor systems like EBR-II and FFTF, the placement of structural pins and assemblies internal to the core leads to problems with power heating predictions because there is no fission power source internal to the assembly to dictate a spatial distribution of the power. As part of the EBR-II support work in the 1980s, the GAMSOR code was developed to assist analysts in calculating the gamma heating. The GAMSOR code is a modified version of DIF3D and actually functions within a sequence of DIF3D calculations. The gamma flux in a conventional fission reactor system does not perturb the neutron flux and thus the gamma flux calculation can be cast as a fixed source problem given a solution to the steady state neutron flux equation. This leads to a sequence of DIF3D calculations, called the GAMSOR sequence, which involves solving the neutron flux, then the gamma flux, and then combining the results to do a summary edit. In this manuscript, we go over the GAMSOR code and detail how it is put together and functions. We also discuss how to setup the GAMSOR sequence and input for each DIF3D calculation in the GAMSOR sequence.

Neutron Fluence Evaluation of Reactor Internal Structure Using 3D Transport Calculation Code, RAPTOR-M3G

International Nuclear Information System (INIS)

Maeng, YoungJae; Lim, MiJoung; Kim, KyungSik; Cho, YoungKi; Yoo, ChoonSung; Kim, ByoungChul

2015-01-01

Age-related degradation mechanisms are including the irradiation-assisted stress corrosion cracking(IASCC), void swelling, stress relaxation, fatigue, and etc. A lot of Baffle Former Bolts(BFBs) was installed at the former plate ends between baffle and barrel structure. These would undergo severe experiences, which are high temperature and pressure, bypass water flow and neutron exposure and have some radioactive limitation in inspecting their integrity. The objectives of this paper is to evaluate fast neutron fluence(n/cm 2 , E>1.0MeV) for PWR internals using 3D transport calculation code, RAPTOR-M3G, and to figure out a strategy to manage the effects of aging in PWR internals. One of age-related degradation mechanisms, IASCC, which is affected by fast neutron exposure rate, has been currently issued for PWR internals and has 2 x 10 21 (n/cm 2 ) of the threshold value by MRP-175. Because a lot of BFBs was installed around the internal components, closer inspections are required. As part of an aging management for Kori unit 2, 3D transport calculation code, RAPTOR-M3G, was applied for determining fast neutron fluence at baffle, barrel and former plates regions. As a result, the fast neutron fluence exceeds the screening or threshold values of IASCC in all of baffle, barrel and former plate region. And the most significant region is the baffle because it is located closest to the core. In addition, some regions including former plate tend to be more damaged because of less moderate ability than water. In conclusion, Ice's has been progressed for PWR internals of Kori unit 2. Several regions of internal components were damaged by fast neutron exposure and increase in size as time goes by

ACE-FTS version 3.0 data set: validation and data processing update

Directory of Open Access Journals (Sweden)

Claire Waymark

2014-01-01

Full Text Available On 12 August 2003, the Canadian-led Atmospheric Chemistry Experiment (ACE was launched into a 74° inclination orbit at 650 km with the mission objective to measure atmospheric composition using infrared and UV-visible spectroscopy (Bernath et al. 2005. The ACE mission consists of two main instruments, ACE-FTS and MAESTRO (McElroy et al. 2007, which are being used to investigate the chemistry and dynamics of the Earth’s atmosphere.  Here, we focus on the high resolution (0.02 cm-1 infrared Fourier Transform Spectrometer, ACE-FTS, that measures in the 750-4400 cm-1 (2.2 to 13.3 µm spectral region.  This instrument has been making regular solar occultation observations for more than nine years.  The current ACE-FTS data version (version 3.0 provides profiles of temperature and volume mixing ratios (VMRs of more than 30 atmospheric trace gas species, as well as 20 subsidiary isotopologues of the most abundant trace atmospheric constituents over a latitude range of ~85°N to ~85°S.  This letter describes the current data version and recent validation comparisons and provides a description of our planned updates for the ACE-FTS data set. [...

Association of ACE gene A2350G and I/D polymorphisms with essential hypertension in the northernmost province of China.

Science.gov (United States)

Sun, Feifei; He, Ning; Zhang, Keyong; Wu, Nan; Zhao, Jingbo; Qiu, Changchun

2018-01-01

Angiotensin converting enzyme (ACE) gene, as a strong candidate gene for essential hypertension(EH), has been extensively studied. In this study, we carried out a population-based case-control study to explore whether ACE gene I/D and A2350G polymorphisms could consider to be risk factors for EH. A total of 2040 subjeces were recruited from Chinese Han in this study, out of which 1010 were cases and 1030 were normotensive individuals. ACE gene A2350G and I/D polymorphisms were amplified by polymerase chain reaction (PCR) and A2350G polymorphism was detected after restriction enzyme digestion with BstuI. Besides, we choosed 10% samples randomly sequencing to verify the accuracy of results. Genotype and allele frequencies distribution of I/D and A2350G in EH and control groups were significantly different. After grouped by sex or age, there were still statistical significances for two polymorphisms. In dominant and recessive model of A2350G, we found significant differences between two groups, respectively. For ACE I/D polymorphism, we observed that the existence of dramatical difference in dominant model between two groups, while in recessive model, marginally significant difference was found. Among the four haplotypes composed by ACE gene A2350G and I/D, haplotype G-D reached the statistical significance in two groups, and exhibited to be a risk factor for the development of EH, whose P ACE gene A2350G and I/D polymorphisms were associated with increasing the risk of suffering from EH in the northernmost province of China individuals, with D allele and G allele individuals had a higher risk of EH(OR = 1.443, 95%CI = 1.273-1.636 and OR = 1.481, 95%CI = 1.303-1.684).

GPU-accelerated 3D neutron diffusion code based on finite difference method

Energy Technology Data Exchange (ETDEWEB)

Xu, Q.; Yu, G.; Wang, K. [Dept. of Engineering Physics, Tsinghua Univ. (China)

2012-07-01

Finite difference method, as a traditional numerical solution to neutron diffusion equation, although considered simpler and more precise than the coarse mesh nodal methods, has a bottle neck to be widely applied caused by the huge memory and unendurable computation time it requires. In recent years, the concept of General-Purpose computation on GPUs has provided us with a powerful computational engine for scientific research. In this study, a GPU-Accelerated multi-group 3D neutron diffusion code based on finite difference method was developed. First, a clean-sheet neutron diffusion code (3DFD-CPU) was written in C++ on the CPU architecture, and later ported to GPUs under NVIDIA's CUDA platform (3DFD-GPU). The IAEA 3D PWR benchmark problem was calculated in the numerical test, where three different codes, including the original CPU-based sequential code, the HYPRE (High Performance Pre-conditioners)-based diffusion code and CITATION, were used as counterpoints to test the efficiency and accuracy of the GPU-based program. The results demonstrate both high efficiency and adequate accuracy of the GPU implementation for neutron diffusion equation. A speedup factor of about 46 times was obtained, using NVIDIA's Geforce GTX470 GPU card against a 2.50 GHz Intel Quad Q9300 CPU processor. Compared with the HYPRE-based code performing in parallel on an 8-core tower server, the speedup of about 2 still could be observed. More encouragingly, without any mathematical acceleration technology, the GPU implementation ran about 5 times faster than CITATION which was speeded up by using the SOR method and Chebyshev extrapolation technique. (authors)

GPU-accelerated 3D neutron diffusion code based on finite difference method

International Nuclear Information System (INIS)

Xu, Q.; Yu, G.; Wang, K.

2012-01-01

Finite difference method, as a traditional numerical solution to neutron diffusion equation, although considered simpler and more precise than the coarse mesh nodal methods, has a bottle neck to be widely applied caused by the huge memory and unendurable computation time it requires. In recent years, the concept of General-Purpose computation on GPUs has provided us with a powerful computational engine for scientific research. In this study, a GPU-Accelerated multi-group 3D neutron diffusion code based on finite difference method was developed. First, a clean-sheet neutron diffusion code (3DFD-CPU) was written in C++ on the CPU architecture, and later ported to GPUs under NVIDIA's CUDA platform (3DFD-GPU). The IAEA 3D PWR benchmark problem was calculated in the numerical test, where three different codes, including the original CPU-based sequential code, the HYPRE (High Performance Pre-conditioners)-based diffusion code and CITATION, were used as counterpoints to test the efficiency and accuracy of the GPU-based program. The results demonstrate both high efficiency and adequate accuracy of the GPU implementation for neutron diffusion equation. A speedup factor of about 46 times was obtained, using NVIDIA's Geforce GTX470 GPU card against a 2.50 GHz Intel Quad Q9300 CPU processor. Compared with the HYPRE-based code performing in parallel on an 8-core tower server, the speedup of about 2 still could be observed. More encouragingly, without any mathematical acceleration technology, the GPU implementation ran about 5 times faster than CITATION which was speeded up by using the SOR method and Chebyshev extrapolation technique. (authors)

The Metabolic Response of Skeletal Muscle to Endurance Exercise Is Modified by the ACE-I/D Gene Polymorphism and Training State

Directory of Open Access Journals (Sweden)

Paola Valdivieso

2017-12-01

Full Text Available The insertion/deletion polymorphism in the gene for the regulator of vascular tone, angiotensin-converting enzyme (ACE, is the prototype of a genetic influence on physical fitness and this involves an influence on capillary supply lines and dependent aerobic metabolism in skeletal muscle. The respective interaction of ACE-I/D genotype and training status on local metabolic and angiogenic reactions in exercised muscle is not known. Toward this end we characterized the metabolomic and angiogenic response in knee extensor muscle, m. vastus lateralis, in 18 untrained and 34 endurance-trained (physically active, V˙O2max > 50 mL min−1 kg−1 white British men to an exhaustive bout of one-legged cycling exercise. We hypothesized that training status and ACE-I/D genotype affect supply-related muscle characteristics of exercise performance in correspondence to ACE expression and angiotensin 2 levels. ACE-I/D genotype and training status developed an interaction effect on the cross-sectional area (CSA of m. vastus lateralis and mean CSA of slow type fibers, which correlated with peak power output (r ≥ 0.44. Genotype × training interactions in muscle also resolved for exercise-induced alterations of 22 metabolites, 8 lipids, glycogen concentration (p = 0.016, ACE transcript levels (p = 0.037, and by trend for the pro-angiogenic factor tenascin-C post exercise (p = 0.064. Capillary density (p = 0.001, capillary-to-fiber ratio (p = 0.010, systolic blood pressure (p = 0.014, and exercise-induced alterations in the pro-angiogenic protein VEGF (p = 0.043 depended on the ACE-I/D genotype alone. Our observations indicate that variability in aerobic performance in the studied subjects was in part reflected by an ACE-I/D-genotype-modulated metabolic phenotype of a major locomotor muscle. Repeated endurance exercise appeared to override this genetic influence in skeletal muscle by altering the ACE-related metabolic response and molecular aspects of the

The Metabolic Response of Skeletal Muscle to Endurance Exercise Is Modified by the ACE-I/D Gene Polymorphism and Training State.

Science.gov (United States)

Valdivieso, Paola; Vaughan, David; Laczko, Endre; Brogioli, Michael; Waldron, Sarah; Rittweger, Jörn; Flück, Martin

2017-01-01

The insertion/deletion polymorphism in the gene for the regulator of vascular tone, angiotensin-converting enzyme (ACE), is the prototype of a genetic influence on physical fitness and this involves an influence on capillary supply lines and dependent aerobic metabolism in skeletal muscle. The respective interaction of ACE-I/D genotype and training status on local metabolic and angiogenic reactions in exercised muscle is not known. Toward this end we characterized the metabolomic and angiogenic response in knee extensor muscle, m. vastus lateralis , in 18 untrained and 34 endurance-trained (physically active, [Formula: see text]O2max > 50 mL min -1 kg -1 ) white British men to an exhaustive bout of one-legged cycling exercise. We hypothesized that training status and ACE-I/D genotype affect supply-related muscle characteristics of exercise performance in correspondence to ACE expression and angiotensin 2 levels. ACE-I/D genotype and training status developed an interaction effect on the cross-sectional area (CSA) of m. vastus lateralis and mean CSA of slow type fibers, which correlated with peak power output ( r ≥ 0.44). Genotype × training interactions in muscle also resolved for exercise-induced alterations of 22 metabolites, 8 lipids, glycogen concentration ( p = 0.016), ACE transcript levels ( p = 0.037), and by trend for the pro-angiogenic factor tenascin-C post exercise ( p = 0.064). Capillary density ( p = 0.001), capillary-to-fiber ratio ( p = 0.010), systolic blood pressure ( p = 0.014), and exercise-induced alterations in the pro-angiogenic protein VEGF ( p = 0.043) depended on the ACE-I/D genotype alone. Our observations indicate that variability in aerobic performance in the studied subjects was in part reflected by an ACE-I/D-genotype-modulated metabolic phenotype of a major locomotor muscle. Repeated endurance exercise appeared to override this genetic influence in skeletal muscle by altering the ACE-related metabolic response and molecular aspects

Effects of neutron source ratio on nuclear characteristics of D-D fusion reactor blankets and shields

International Nuclear Information System (INIS)

Nakashima, Hideki; Nakao, Yasuyuki; Ohta, Masao

1978-01-01

An examination is made of the dependence shown by the nuclear characteristics of the blanket and shield of D-D fusion reactors on S sub( d d)/S sub( d t), the ratio between the 2.45 MeV neutrons resulting from the D-D reaction and those of 14.06 MeV from the D-T reaction. Also, an estimate is presented of this neutron source ratio S sub( d d)/S sub( d t) for the case of D-D reactors, taken as an example. It is shown that an increase of S sub( d d)/S sub( d t) reduces the amount of nuclear heating per unit source neutron, while at the same time improving the shielding characteristics. This is accountable to lowering of the energy and penetrability of incident neutrons into the blanket brought about by the increase of S sub( d d)/S sub( d t). The value of S sub( d d)/S sub( d t) in a steady state D-D fusioning plasma core is estimated to be 1.46 -- 1.72 for an ion temperature ranging from 60 -- 180 keV. The reductions obtained on H sub( t)sup( b) (total heating in the blanket), H sub( t)sup( m g)/H sub( t)sup( b) (shielding indicator = ratio between total heating in superconducting magnet and that in the blanket) and phi sup( m g)/phi sup( w) (ratio of fast neutron fluxes between that at the magnet inner surface and that at the first wall inner surface) brought about by increasing S sub( d d)/S sub( d t) from unity to the value cited above do not differ to any appreciable extent, whichever is adopted among the design models considered here, the differences being at most about 10, 15 and 25%, respectively, for these three parameters. These results would broaden the validity of the conclusion derived in the previous paper for the case of S sub( d d)/S sub( d t) = 1.0, that the blanket-shield concept would appear to be the most suitable for D-D fusion reactors. (author)

Stress and neutron scattering measurements on linear polymer melts undergoing steady elongational flow

DEFF Research Database (Denmark)

Hassager, Ole; Mortensen, Kell; Bach, Anders

2012-01-01

We use small-angle neutron scattering to measure the molecular stretching in polystyrene melts undergoing steady elongational flow at large stretch rates. The radius of gyration of the central segment of a partly deuterated polystyrene molecule is, in the stretching direction, increasing...... exhibited by the linear polystyrene melt....

Association of ACTN3 R577X but not ACE I/D gene variants with elite rugby union player status and playing position

OpenAIRE

Heffernan, S. M.; Kilduff, L. P.; Erskine, R. M.; Day, S. H.; McPhee, J. S.; McMahon, G. E.; Stebbings, G. K.; Neale, J. P. H.; Lockey, S. J.; Ribbans, W. J.; Cook, C. J.; Vance, B.; Raleigh, S. M.; Roberts, C.; Bennett, M. A.

2016-01-01

We aimed to quantify the ACE I/D and ACTN3 R577X (rs1815739) genetic variants in elite rugby athletes (rugby union and league) and compare genotype frequencies to controls and between playing positions. The rugby athlete cohort consisted of 507 Caucasian men, including 431 rugby union athletes that for some analyses were divided into backs and forwards and into specific positional groups: front five, back row, half backs, centers, and back three. Controls were 710 Caucasian men and women. Rea...

Association of AGTR1 (A1166C and ACE (I/D Polymorphisms with Breast Cancer Risk in North Indian Population

Directory of Open Access Journals (Sweden)

Anukriti Singh

2018-04-01

Full Text Available Renin angiotensin system (RAS comprising Angiotensin converting enzyme (ACE, Angiotensin II (Ang II and its receptor Angiotensin II receptor type I (AGTR1, plays a critical role in several diseases including cancer. A single nucleotide polymorphism (SNP A1166C located in 3′ untranslated region (UTR of AGTR1 and an insertion/deletion (I/D polymorphism present in intron 16 of ACE gene have been associated with many diseases, but their association with Breast cancer (BCa is still debatable. Here, we for the first time investigated the association of these polymorphisms in a North Indian BCa cohort including 161 patients and 152 healthy women. The polymorphisms were evaluated by polymerase chain reaction (PCR and restriction fragment length polymorphism (RFLP respectively. The association between these polymorphisms and BCa risk was estimated by calculating Odds Ratio (OR and chi-square (χ2 test. The DD genotype/D allele of ACE (I/D polymorphism and “AC and CC” genotype/C allele of AGTR1 (A1166C polymorphism were associated with higher risk of BCa when evaluated independently. Furthermore, interaction analysis of “AC and CC” and DD genotype and combination of “C and D” alleles of both polymorphisms revealed significantly greater BCa risk than that observed independently. Conclusively, women harboring “AC or CC” genotype/C allele for AGTR1 (A1166C polymorphism and DD genotype/D allele for ACE (I/D polymorphisms have a predisposition to develop more aggressive disease with advanced staging and larger tumor size. Our study indicates importance of genetic screening based on these polymorphisms for women, who may have higher risk of BCa.

Implications of ACE (I/D) Gene Variants to the Genetic Susceptibility of Coronary Artery Disease in Asian Indians.

Science.gov (United States)

Bhatti, G K; Bhatti, J S; Vijayvergiya, R; Singh, B

2017-06-01

Angiotensin-1-converting enzyme (ACE) gene has established substantial attention in the recent years as a candidate gene for hypertension, cardiovascular diseases and type 2 diabetes. The aim of the present study was to investigate the association of ACE (I/D) polymorphism with coronary artery disease (CAD) in a north Indian population. A total of 662 subjects (330 CAD patients and 332 healthy controls) were examined for association of ACE gene (I/D) polymorphism and environmental risk factors. The mean age of the CAD patients and control subjects was 60.53 ± 8.6 years and 56.55 ± 7.7 years, respectively ( p  = 0.000). Anthropometric and demographic data showed BMI values significantly higher among CAD patients and control subjects (26.98 ± 4.9 vs 24.04 ± 4.7, p  = 0.000). We observed pronounced central obesity in both CAD patients and controls, even at the lowest BMI values (ACE gene. In conclusion, DD genotype of ACE gene may be associated with increased risk of CAD in Asian Indian population.

Thermal hydraulic and neutron kinetic coupled simulation of the IPR-R1 Triga reactor

Energy Technology Data Exchange (ETDEWEB)

Reis, Patricia A.L.; Costa, Antonella L.; Pereira, Claubia; Silva, Clarysson A.M. da; Veloso, Maria Auxiliadora F.; Soares, Humbero V., E-mail: patricialire@yahoo.com.br, E-mail: antonella@nuclear.ufmg.br, E-mail: claubia@nuclear.ufmg.br, E-mail: clarysson@nuclear.ufmg.br, E-mail: dora@nuclear.ufmg.br, E-mail: betovitor@ig.com.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear; Instituto Nacional de Ciencias e Tecnologia de Reatores Nucleares Inovadores (INCT/CNPq Rede), Rio de Janeiro, RJ (Brazil)

2013-07-01

The nuclear industry and the scientific community have turned the attention for the development of coupled 3D neutron kinetics (NK) and thermal-hydraulic (TH) system codes to investigate specific nuclear reactor transients. Improving in theoretical investigations of complex phenomena in nuclear reactor technology have been increased thanks to numerical methods and computational resources incorporated in nuclear codes. This paper presents a model for the IPR-R1 TRIGA research reactor using the RELAP5-3D 3.0 code. The development and the assessment of the thermal-hydraulic RELAP5 code model for the IPR-R1 have been validated for steady state and transient situations and the results were published in preceding works. Results of RELAP5-3D steady state and a transient case presented in this paper show good agreement with experimental data, validating then this model for point kinetic calculations. To supply adequate cross sections to the NK code, the WIMSD5 is being used. First results of steady state calculation using the 3D neutron modeling are being presented in this paper. (author)

Impact of I/D polymorphism of angiotensin-converting enzyme (ACE) gene on myocardial infarction susceptibility among young Moroccan patients.

Science.gov (United States)

Hmimech, Wiam; Idrissi, Hind Hassani; Diakite, Brehima; Korchi, Farah; Baghdadi, Dalila; Tahri Joutey Hassani Idrissi, Hind; Haboub, Meriem; Habbal, Rachida; Nadifi, Sellama

2017-12-21

Our case-control study aimed to access the potential association of insertion/deletion (I/D) ACE (angiotensin converting enzyme) gene polymorphism with myocardial infarction (MI) risk of occurrence among a sample of Moroccan patients, especially young ones. Distribution of I/D ACE gene variant among cases vs controls, showed that healthy controls carried out higher frequency of wild type allele I compared to cases (23.5% vs 21.79% respectively), when cases were carrying higher frequency of mutant allele D (78.21% vs 76.5% for controls). Patients were-after this- divided into two groups of  55 years of age, to investigate whether or not younger patients carried out higher frequency of the mutant allele D, than older ones. As expected, ACE polymorphism may be associated with MI occurrence among younger patients (< 45 years of age).

Prompt-gamma neutron activation analysis system design: Effects of D-T versus D-D neutron generator source selection

Science.gov (United States)

Prompt-gamma neutron activation (PGNA) analysis is used for the non-invasive measurement of human body composition. Advancements in portable, compact neutron generator design have made those devices attractive as neutron sources. Two distinct generators are available: D-D with 2.5 MeV and D-T with...

Cross sections for d-{sup 3}H neutron interactions with samarium isotopes

Energy Technology Data Exchange (ETDEWEB)

Luo, Junhua; He, Long [Hexi Univ., Zhangye (China). School of Physics and Electromechanical Engineering; Wu, Chunlei; Jiang, Li [Chinese Academy of Engineering Physics, Mianyang (China). Inst. of Nuclear Physics and Chemistry

2016-11-01

The cross sections for (n,x) reactions on samarium isotopes were measured at (d-T) neutron energies of 13.5 and 14.8 MeV with the activation technique. Samples were activated along with Nb and Al monitor foils to determine the incident neutron flux. Theoretical calculations of excitation functions were performed using the nuclear model codes TALYS-1.6 and EMPIRE-3.2 Malta with default parameters, at neutron energies varying from the reaction threshold to 20 MeV. The results were discussed and compared with experimental data found in the literature. At neutron energies 13.5 and 14.8 MeV, the cross sections of the {sup 149}Sm(n,p){sup 149}Pm reaction are reported for the first time. The cross sections of the {sup 150}Sm(n,p){sup 150}Pm, {sup 144}Sm(n,p){sup 144}Pm, {sup 152}Sm(n,α){sup 149}Nd and {sup 144}Sm(n,α){sup 141}Nd reactions at different neutron energies reported in the present work can be added as new data in the nuclear databases.

Small-angle neutron polarization for the /sup 2/H(d vector,n vector)/sup 3/He reaction near Esub(d) = 8MeV

Energy Technology Data Exchange (ETDEWEB)

Tornow, W.; Woye, W.; Mack, G. (Tuebingen Univ. (Germany, F.R.). Physikalisches Inst.); Walter, R.L.; Floyd, C.E.; Guss, P.P.; Byrd, R.C. (Duke Univ., Durham, NC (USA). Dept. of Physics; Triangle Universities Nuclear Lab., Durham, NC (USA))

1981-12-15

Considerable improvement in the quality of analyzing power experiments performed with polarized fast neutrons has been achieved during the last few years by using neutrons from the polarization transfer reaction /sup 2/H(d vector,n vector)/sup 3/He at a reaction angle of theta = 0/sup 0/. To compromise in these experiments between intensity problems and finite geometry corrections, it is desirable in some instances to subtend a full-width angle ..delta..theta of 20/sup 0/ (lab) centered about theta = 0/sup 0/. In order to investigate the suitability of this reaction as a source of polarized neutrons for cases where the scatterer is close to the neutron source, the neutron polarization of the reaction /sup 2/H(d vector,n vector)/sup 3/He has been studied with ..delta..theta of about 3/sup 0/ in 3/sup 0/ steps out to theta = 20/sup 0/ (lab). An incident deuteron energy near 8 MeV was chosen to yield outgoing neutrons at 11.0 MeV, a typical energy for neutron analyzing power experiments. It is found that the effective neutron polarization, a combination of the two polarizations measured when the direction of the deuteron polarization is inverted or flipped at the polarized ion source, is large and nearly constant for angles between theta = 0/sup 0/ and theta = 10/sup 0/ (lab).

Coupling of 3D neutronics models with the system code ATHLET

International Nuclear Information System (INIS)

Langenbuch, S.; Velkov, K.

1999-01-01

The system code ATHLET for plant transient and accident analysis has been coupled with 3D neutronics models, like QUABOX/CUBBOX, for the realistic evaluation of some specific safety problems under discussion. The considerations for the coupling approach and its realization are discussed. The specific features of the coupled code system established are explained and experience from first applications is presented. (author)

Prompt-gamma neutron activation analysis system design. Effects of D-T versus D-D neutron generator source selection

International Nuclear Information System (INIS)

Shypailo, R.J.; Ellis, K.J.

2008-01-01

Prompt-gamma neutron activation (PGNA) analysis is used for the non-invasive measurement of human body composition. Advancements in portable, compact neutron generator design have made those devices attractive as neutron sources. Two distinct generators are available: D-D with 2.5 MeV and D-T with 14.2 MeV neutrons. To compare the performance of these two units in our present PGNA system, we performed Monte Carlo simulations (MCNP-5; Los Alamos National Laboratory) evaluating the nitrogen reactions produced in tissue-equivalent phantoms and the effects of background interference on the gamma-detectors. Monte Carlo response curves showed increased gamma production per unit dose when using the D-D generator, suggesting that it is the more suitable choice for smaller sized subjects. The increased penetration by higher energy neutrons produced by the D-T generator supports its utility when examining larger, especially obese, subjects. A clinical PGNA analysis design incorporating both neutron generator options may be the best choice for a system required to measure a wide range of subject phenotypes. (author)

The role of IL-4 gene 70 bp VNTR and ACE gene I/D variants in Familial Mediterranean fever.

Science.gov (United States)

Yigit, Serbülent; Tural, Sengul; Tekcan, Akın; Tasliyurt, Turker; Inanir, Ahmet; Uzunkaya, Süheyla; Kismali, Gorkem

2014-05-01

Familial Mediterranean fever (FMF) is characterized by recurrent attacks of fever and inflammation in the peritoneum, synovium, or pleura, accompanied by pain. It is an autosomal recessive disease caused by mutations in the MEFV (MEditerranean FeVer) gene. Patients with similar genotypes exhibit phenotypic diversity. As a result, the variations in different genes could be responsible for the clinical findings of this disease. In previous studies genes encoding Angiotensin-Converting Enzyme (ACE) and IL-4 (Interleukin-4) were found to be associated with rheumatologic and autoimmune diseases. In the present study we hypothesized whether ACE I/D or IL-4 70 bp variable tandem repeats (VNTR) genes are associated with FMF and its clinical findings in Turkish patients. Genomic DNA obtained from 670 persons (339 patients with FMF and 331 healthy controls) was used in the study. Genotypes for an ACE gene I/D polymorphism and IL-4 gene 70 bp VNTR were determined by polymerase chain reaction with specific primers. To our knowledge, this is the first study examining ACE gene I/D polymorphism and IL-4 gene 70 bp VNTR polymorphism in FMF patients. As a result, there was a statistically significant difference between the groups with respect to genotype distribution (pACE gene DD genotype was associated with an increased risk in FMF [pACE genotype frequencies according to the clinical characteristics, we found a statistically significant association between DD+ID genotype and fever (p=0.04). In addition IL-4 gene P1P1 genotype was associated with FMF (pACE gene and P1 allele or P1P1 genotype of IL-4 gene may be important molecular markers for susceptibility of FMF. Copyright © 2014 Elsevier Ltd. All rights reserved.

Feasibility of the integration of CRONOS, a 3-D neutronics code, into real-time simulators

International Nuclear Information System (INIS)

Ragusa, J.C.

2001-01-01

In its effort to contribute to nuclear power plant safety, CEA proposes the integration of an engineering grade 3-D neutronics code into a real-time plant analyser. This paper describes the capabilities of the neutronics code CRONOS to achieve a fast running performance. First, we will present current core models in simulators and explain their drawbacks. Secondly, the mean features of CRONOS's spatial-kinetics methods will be reviewed. We will then present an optimum core representation with respect to mesh size, choice of finite elements (FE) basis and execution time, for accurate results as well as the multi 1-D thermal-hydraulics (T/H) model developed to take into account 3-D effects in updating the cross-sections. A Main Steam Line Break (MSLB) End-of-Life (EOL) Hot-Zero-Power (HZP) accident will be used as an example, before we conclude with the perspectives of integrating CRONOS's 3-D core model into real-time simulators. (author)

Feasibility of the integration of CRONOS, a 3-D neutronics code, into real-time simulators

Energy Technology Data Exchange (ETDEWEB)

Ragusa, J.C. [CEA Saclay, Dept. de Mecanique et de Technologie, 91 - Gif-sur-Yvette (France)

2001-07-01

In its effort to contribute to nuclear power plant safety, CEA proposes the integration of an engineering grade 3-D neutronics code into a real-time plant analyser. This paper describes the capabilities of the neutronics code CRONOS to achieve a fast running performance. First, we will present current core models in simulators and explain their drawbacks. Secondly, the mean features of CRONOS's spatial-kinetics methods will be reviewed. We will then present an optimum core representation with respect to mesh size, choice of finite elements (FE) basis and execution time, for accurate results as well as the multi 1-D thermal-hydraulics (T/H) model developed to take into account 3-D effects in updating the cross-sections. A Main Steam Line Break (MSLB) End-of-Life (EOL) Hot-Zero-Power (HZP) accident will be used as an example, before we conclude with the perspectives of integrating CRONOS's 3-D core model into real-time simulators. (author)

Positive Association of D Allele of ACE Gene With High Altitude Pulmonary Edema in Indian Population.

Science.gov (United States)

Bhagi, Shuchi; Srivastava, Swati; Tomar, Arvind; Bala Singh, Shashi; Sarkar, Soma

2015-06-01

High altitude pulmonary edema (HAPE) is a potentially fatal high altitude illness occurring as a result of hypobaric hypoxia with an unknown underlying genetic mechanism. Recent studies have shown a possible association between HAPE and polymorphisms in genes of the renin-angiotensin-aldosterone system (RAAS), which play a key role in sensitivity of an individual toward HAPE. For the present investigation, study groups consisted of HAPE patients (HAPE) and acclimatized control subjects (rCON). Four single-nucleotide polymorphisms (SNPs) were genotyped using restriction fragment length polymorphism (RFLP) analysis in genes of the RAAS pathway, specifically, renin (REN) C(-4063)T (rs41317140) and RENi8-83 (rs2368564), angiotensin (AGT) M(235)T (rs699), and angiotensin-converting enzyme (ACE) insertion/deletion (I/D) (rs1799752). Only the I/D polymorphism of the ACE gene showed a significant difference between the HAPE and rCON groups. The frequency of the D allele was found to be significantly higher in the HAPE group. Arterial oxygen saturation levels were significantly lower in the HAPE group compared with the rCON group and also decreased in the I/D and D/D genotypes compared with the I/I genotype in these groups. The other polymorphisms occurring in the REN and AGT genes were not significantly different between the 2 groups. These findings demonstrate a possible association of the I/D polymorphism of the ACE gene with the development of HAPE, with D/D being the at-risk genotype. Copyright © 2015 Wilderness Medical Society. Published by Elsevier Inc. All rights reserved.

The OECD/NEA/NSC PBMR400 MW coupled neutronics thermal hydraulics transient benchmark - Steady-state results and status

International Nuclear Information System (INIS)

Reitsma, F.; Han, J.; Ivanov, K.; Sartori, E.

2008-01-01

The PBMR is a High-Temperature Gas-cooled Reactor (HTGR) concept developed to be built in South Africa. The analysis tools used for core neutronic design and core safety analysis need to be verified and validated. Since only a few pebble-bed HTR experimental facilities or plant data are available the use of code-to-code comparisons are an essential part of the V and V plans. As part of this plan the PBMR 400 MW design and a representative set of transient cases is defined as an OECD benchmark. The scope of the benchmark is to establish a series of well-defined multi-dimensional computational benchmark problems with a common given set of cross-sections, to compare methods and tools in coupled neutronics and thermal hydraulics analysis with a specific focus on transient events. The OECD benchmark includes steady-state and transients cases. Although the focus of the benchmark is on the modelling of the transient behaviour of the PBMR core, it was also necessary to define some steady-state cases to ensure consistency between the different approaches before results of transient cases could be compared. This paper describes the status of the benchmark project and shows the results for the three steady state exercises defined as a standalone neutronics calculation, a standalone thermal-hydraulic core calculation, and a coupled neutronics/thermal-hydraulic simulation. (authors)

Evaluation of Association of ADRA2A rs553668 and ACE I/D Gene Polymorphisms with Obesity Traits in the Setapak Population, Malaysia.

Science.gov (United States)

Shunmugam, Vicneswari; Say, Yee-How

2016-02-01

α-adrenergic receptor 2A (ADRA2A) and angiotensin-converting enzyme (ACE) genes have been variably associated with obesity and its related phenotypes in different populations worldwide. This cross-sectional study aims to investigate the association of adrenergic receptor α2A (ADRA2A) rs553668 and angiotensin-converting enzyme (ACE) I/D single nucleotide polymorphisms (SNPs) with obesity traits (body mass index-BMI; waist-hip ratio-WHR; total body fat percentage - TBF) in a Malaysian population. Demographic and clinical variables were initially collected from 230 subjects via convenience sampling among residents and workers in Setapak, Malaysia, but in the end only 214 multi-ethnic Malaysians (99 males; 45 Malays, 116 ethnic Chinese, and 53 ethnic Indians) were available for statistical analysis. Genotyping was performed by polymerase chain reaction using DNA extracted from mouthwash samples. The overall minor allele frequencies (MAFs) for ADRA2A rs553668 and ACE I/D were 0.55 and 0.56, respectively. Allele distribution of ACE I/D was significantly associated with ethnicity and WHR class. Logistic regression analysis showed that subjects with the ACE II genotype and I allele were, respectively, 2.15 and 1.55 times more likely to be centrally obese, but when adjusted for age and ethnicity, this association was abolished. Covariate analysis controlling for age, gender, and ethnicity also showed similar results, where subjects carrying the II genotype or I allele did not have significantly higher WHR. Combinatory genotype and allele analysis for ADRA2A rs553668 and ACE I/D showed that subjects with both ADRA2A rs553668 GG and ACE I/D II genotypes had significant lowest WHR compared to other genotype combinations. The ACE II genotype might be a protective factor against central adiposity risk among the Malaysian population when in combination with the ADRA2A rs553668 GG genotype.

Angiotensin converting enzyme (ACE and ACE2 bind integrins and ACE2 regulates integrin signalling.

Directory of Open Access Journals (Sweden)

Nicola E Clarke

Full Text Available The angiotensin converting enzymes (ACEs are the key catalytic components of the renin-angiotensin system, mediating precise regulation of blood pressure by counterbalancing the effects of each other. Inhibition of ACE has been shown to improve pathology in cardiovascular disease, whilst ACE2 is cardioprotective in the failing heart. However, the mechanisms by which ACE2 mediates its cardioprotective functions have yet to be fully elucidated. Here we demonstrate that both ACE and ACE2 bind integrin subunits, in an RGD-independent manner, and that they can act as cell adhesion substrates. We show that cellular expression of ACE2 enhanced cell adhesion. Furthermore, we present evidence that soluble ACE2 (sACE2 is capable of suppressing integrin signalling mediated by FAK. In addition, sACE2 increases the expression of Akt, thereby lowering the proportion of the signalling molecule phosphorylated Akt. These results suggest that ACE2 plays a role in cell-cell interactions, possibly acting to fine-tune integrin signalling. Hence the expression and cleavage of ACE2 at the plasma membrane may influence cell-extracellular matrix interactions and the signalling that mediates cell survival and proliferation. As such, ectodomain shedding of ACE2 may play a role in the process of pathological cardiac remodelling.

RETRACTED: Association of the ACE I/D gene polymorphism with sepsis susceptibility and sepsis progression.

Science.gov (United States)

Yang, Chun-Hua; Zhou, Tian-Biao

2015-12-01

This article has been included in a multiple retraction: Chun-Hua Yang and Tian-Biao Zhou Association of the ACE I/D gene polymorphism with sepsis susceptibility and sepsis progression Journal of Renin-Angiotensin-Aldosterone System 1470320314568521, first published on February 3, 2015 doi: 10.1177/1470320314568521 This article has been retracted at the request of the Editors and the Publisher. After conducting a thorough investigation, SAGE found that the submitting authors of a number of papers published in the Journal of the Renin-Angiotensin Aldosterone System ( JRAAS) (listed below) had supplied fabricated contact details for their nominated reviewers. The Editors accepted these papers based on the reports supplied by the individuals using these fake reviewer email accounts. After concluding that the peer review process was therefore seriously compromised, SAGE and the journal Editors have decided to retract all affected articles. Online First articles (these articles will not be published in an issue) Wenzhuang Tang, Tian-Biao Zhou, and Zongpei Jiang Association of the angiotensinogen M235T gene polymorphism with risk of diabetes mellitus developing into diabetic nephropathy Journal of Renin-Angiotensin-Aldosterone System 1470320314563426, first published on December 18, 2014 doi: 10.1177/1470320314563426 Tian-Biao Zhou, Hong-Yan Li, Zong-Pei Jiang, Jia-Fan Zhou, Miao-Fang Huang, and Zhi-Yang Zhou Role of renin-angiotensin-aldosterone system inhibitors in radiation nephropathy Journal of Renin-Angiotensin-Aldosterone System 1470320314563424, first published on December 18, 2014 doi: 10.1177/1470320314563424 Weiqiang Zhong, Zongpei Jiang, and Tian-Biao Zhou Association between the ACE I/D gene polymorphism and T2DN susceptibility: The risk of T2DM developing into T2DN in the Asian population Journal of Renin-Angiotensin-Aldosterone System 1470320314566019, first published on January 26, 2015 doi: 10.1177/1470320314566019 Tian-Biao Zhou, Xue-Feng Guo, Zongpei

Coupling of the 3D neutron kinetic core model DYN3D with the CFD software ANSYS-CFX

International Nuclear Information System (INIS)

Grahn, Alexander; Kliem, Sören; Rohde, Ulrich

2015-01-01

Highlights: • Improved thermal hydraulic description of nuclear reactor cores. • Possibility of three-dimensional flow phenomena in the core, such as cross flow, flow reversal, flow around obstacles. • Simulation at higher spatial resolution as compared to system codes. - Abstract: This article presents the implementation of a coupling between the 3D neutron kinetic core model DYN3D and the commercial, general purpose computational fluid dynamics (CFD) software ANSYS-CFX. In the coupling approach, parts of the thermal hydraulic calculation are transferred to CFX for its better ability to simulate the three-dimensional coolant redistribution in the reactor core region. The calculation of the heat transfer from the fuel into the coolant remains with DYN3D, which incorporates well tested and validated heat transfer models for rod-type fuel elements. On the CFX side, the core region is modeled based on the porous body approach. The implementation of the code coupling is verified by comparing test case results with reference solutions of the DYN3D standalone version. Test cases cover mini and full core geometries, control rod movement and partial overcooling transients

Analysis of the neutron generation from a D-Li neutron source

International Nuclear Information System (INIS)

Gomes, I.

1994-02-01

The study of the neutron generation from the D-Li reaction is an important issue to define the optimum combination of the intervening parameters during the design phase of a D-Li neutron source irradiation facility. The major players in defining the neutron yield from the D-Li reaction are the deuteron incident energy and the beam current, provided that the lithium target is thick enough to stop all incident deuterons. The incident deuteron energy also plays a role on the angular distribution of the generated neutrons, on the energy distribution of the generated neutrons, and on the maximum possible energy of the neutrons. The D-Li reaction produces neutrons with energies ranging from eV's to several MeV's. The angular distribution of these neutrons is dependent on the energy of both, incident deuterons and generated neutrons. The deuterons lose energy interacting with the lithium target material in such a way that the energy of the deuterons inside the lithium target varies from the incident deuteron energy to essentially zero. The first part of this study focuses in analyzing the neutron generation rate from the D-Li reaction as a function of the intervening parameters, in defining the source term, in terms of the energy and angular distributions of the generated neutrons, and finally in providing some insights of the impact of varying input parameters on the generation rate and correlated distributions. In the second part an analytical description of the Monte Carlo sampling procedure of the neutron from the D-Li reaction is provided with the aim at further Monte Carlo transport of the D-Li neutrons

FENDL-3 benchmark test with neutronics experiments related to fusion in Japan

International Nuclear Information System (INIS)

Konno, Chikara; Ohta, Masayuki; Takakura, Kosuke; Ochiai, Kentaro; Sato, Satoshi

2014-01-01

Highlights: •We have benchmarked FENDL-3.0 with integral experiments with DT neutron sources in Japan. •The FENDL-3.0 is as accurate as FENDL-2.1 and JENDL-4.0 or more. •Some data in FENDL-3.0 may have some problems. -- Abstract: The IAEA supports and promotes the gathering of the best data from evaluated nuclear data libraries for each nucleus involved in fusion reactor applications and compiles these data as FENDL. In 2012, the IAEA released a major update to FENDL, FENDL-3.0, which extends the neutron energy range from 20 MeV to greater than 60 MeV for 180 nuclei. We have benchmarked FENDL-3.0 versus in situ and TOF experiments using the DT neutron source at FNS at the JAEA and TOF experiments using the DT neutron source at OKTAVIAN at Osaka University in Japan. The Monte Carlo code MCNP-5 and the ACE file of FENDL-3.0 supplied from the IAEA were used for the calculations. The results were compared with measured ones and those obtained using the previous version, FENDL-2.1, and the latest version, JENDL-4.0. It is concluded that FENDL-3.0 is as accurate as or more so than FENDL-2.1 and JENDL-4.0, although some data in FENDL-3.0 may be problematic

An experience in the use the Sn method for 1D/2D/3D spallation target neutronics and shielding calculations

International Nuclear Information System (INIS)

Kryuchkov, V.P.; Chang, J.; Young-Sik, Cho; Voloschenko, A.M.; Sumaneev, O.V.

2005-01-01

A discrete ordinate algorithm for coupled charged/neutral particle transport calculations of the pencil beam problems in 3-dimensional r, θ, z and x,y,z geometries is developed. It is based on the use of the second order of accuracy adaptive WDD (AWDD) scheme for approximation both the continuous slowing down and streaming terms of the charged particle transport equation, and a suitable algorithm for treatment of the extended un collided flux from an initially mono directional beam of charged particles with given spatial distribution in the perpendicular section of the beam. The developed algorithm is an extension to the 3D geometry case of a similar approach, previously implemented for plane mono directional beam in 1D transport code ROZ-6 and for pencil beam r,z geometry problems in 2D transport code KASKAD-S. It is implemented in the 3D transport code KATRIN-2.0 and is applied to the high-energy coupled proton-pion-neutron-photon transport calculations. The updated version of multigroup cross section library SADCO-2.4 for nucleon-meson cascade calculations, coupled with standard neutron and gamma-ray cross-section libraries (CONSYST/ABBN-93 and BUGLE96, for example) below 20 MeV, is used. Some numerical examples are given. (authors)

Neutron flux calculations for the Rossendorf research reactor in (hex)- and (hex,z)-geometry using SNAP-3D

International Nuclear Information System (INIS)

Koch, R.; Findeisen, A.

1986-04-01

The multigroup neutron diffusion theory code SNAP-3D has been used to perform time independent neutron flux and power calculations of the 10 MW Rossendorf research reactor of the type WWR-SM. The report describes these calculations, as well as the actual reactor configuration, some details of the code SNAP-3D, and two- and three-dimensional reactor models. For evaluating the calculations some flux values and control rod worths have been compared with those of measurements. (author)

Smoking has no impact on survival and it is not associated with ACE gene I/D polymorphism in hemodialysis patients.

Science.gov (United States)

Kiss, István; Kiss, Zoltán; Kerkovits, Lóránt; Paksy, András; Ambrus, Csaba

2017-01-01

The relationship between smoking and mortality in patients on hemodialysis is controversial. Earlier studies showed that the insertion/deletion (I/D) polymorphism of the ACE gene might have an effect on mortality. The aim of this study was to test the impact of smoking on survival and whether this association was influenced by ACE gene I/D polymorphism in patients on maintenance hemodialysis. In this prospective, multicenter cohort study we analyzed 709 prevalent patients on maintenance hemodialysis. Patients were allocated into groups based on their smoking habit. Outcome data were collected during the 144-month follow-up period. Outcomes of current smokers and lifelong non-smokers were compared. In order to control for interactions between predictor variables, we also identified 160 matched pairs for further sub-analysis. The vast majority of patients (67%) were non-smokers, followed by current smokers (22.2%) and ex-smokers (9.8%). Smoking had no impact on survival in the matched pair analysis ( p = 0.99). After adjustment for ACE I/D polymorphism and other co-variates, smoking had no effect on survival. Our data suggest that smoking has no impact on survival; neither is it associated with ACE gene I/D polymorphism in hemodialysis patients.

Natural equilibria in steady-state neutron diffusion with temperature feedback

International Nuclear Information System (INIS)

Pounders, J. M.; Ingram, R.

2013-01-01

The critical diffusion equation with feedback is investigated within the context of steady-state multiphysics. It is proposed that for critical configurations there is no need to include the multiplication factor k in the formulation of the diffusion equation. This is notable because exclusion of k from the coupled system of equations precludes the mathematically tenuous notion of a nonlinear eigenvalue problem. On the other hand, it is shown that if the factor k is retained in the diffusion equation, as is currently common practice, then the resulting problem is equivalent to the constrained minimization of a functional representing the critical equilibrium of neutron and temperature distributions. The unconstrained solution corresponding to k = 1 represents the natural equilibrium of a critical system at steady-state. Computational methods for solving the constrained problem (with k) are briefly reviewed from the literature and a method for the unconstrained problem (without k) is outlined. A numerical example is studied to examine the effects of the constraint in the nonlinear system. (authors)

Neutron detection and characterization for non-proliferation applications using 3D computer optical memories [Use of 3D optical computer memory for radiation detectors/dosimeters. Final progress report

International Nuclear Information System (INIS)

Phillips, Gary W.

2000-01-01

We have investigated 3-dimensional optical random access memory (3D-ORAM) materials for detection and characterization of charged particles of neutrons by detecting tracks left by the recoil charged particles produced by the neutrons. We have characterized the response of these materials to protons, alpha particles and carbon-12 nuclei as a functions of dose and energy. We have observed individual tracks using scanning electron microscopy and atomic force microscopy. We are investigating the use of neural net analysis to characterize energetic neutron fields from their track structure in these materials

Association between RAS Gene Polymorphisms (ACE I/D, AGT M235T and Henoch-Schönlein Purpura in a Turkish Population

Directory of Open Access Journals (Sweden)

Sinem Nalbantoglu

2013-01-01

Full Text Available Henoch-Schönlein purpura (HSP is a small-vessel vasculitis of autoimmune hypersensitivity, and renin-angiotensin system (RAS regulates vascular homeostasis and inflammation with activation of cytokine release. Thus, we aimed to investigate the association between HSP and ACE I/D and AGT M235T polymorphisms. Genotyping was determined by allele specific PCR and PCR-RFLP. We obtained a significant difference in genotype distribution (p = 0.003 and allele frequencies (p 0.05 and allele frequencies (p > 0.05 of the AGT M235T polymorphism. Risk assessment showed significant risk for HSP in the subjects both with the ID + DD genotype (p = 0.019, OR: 2.288, 95% CI: 1.136–4.609 and D allele (OR: D vs. I: 2.0528, 95% CI: 1.3632–3.0912, p = 0.001 while no significant risk was obtained for HSP in the subjects both with the MT + TT genotype (p = 0.312, OR: 1.3905, 95% CI: 0.7326–2.6391 and T allele (OR: T vs. M: 1.065, 95% CI: 0.729–1.557, p = 0.743. Furthermore, when patients were stratified by the presence of certain systemic complications of HSP, no significant association was detected with ACE I/D, and AGT M235T polymorphisms. Our findings suggest that ACE I/D polymorphism is significantly associated with HSP susceptibility.

Development of high-intensity D-D and D-T neutron sources and neutron filters for medical and industrial applications

International Nuclear Information System (INIS)

Verbeke, J.M.

2000-01-01

This thesis consists of three main parts. The first one relates to boron neutron capture therapy. It summarizes the guidelines obtained by numerical simulations for the treatment of shallow and deep-seated brain tumors, as well as the results on the design of beam-shaping assemblies to moderate D-D and D-T neutrons to epithermal energies. The second part is about boron neutron capture synovectomy for the treatment of rheumatoid arthritis. Optimal neutron energy for treatment and beam-shaping assembly designs are summarized in this section. The last part is on the development of the sealed neutron generator, including experimental results on the prototype ion source and the prototype accelerator column

Current Status and Progress of Developing a D-D Neutron Generator

International Nuclear Information System (INIS)

Kim, In-Jung; Jung, Hwa-Dong; Park, Chang-Su; Jung, Nam-Suk; Chung, Kyoung-Jae; Hwang, Yong-Seok; Choi, H. D.

2006-01-01

The research to develop a D-D neutron generator was begun in 2001. A prototype device was built in 2004, and partly modified in 2005. By using the modified prototype D-D neutron generator, neutron generation runs were performed, and the characteristics of D-D neutron generation was investigated. The final goal of maximum neutron yield is 10 8 n/s, while a yield of 6.5x10 7 n/s has been achieved. Here, the results of neutron generation runs performed by using the modified prototype device are summarized, and the feature of a new ion source to be tested in weeks is briefly described

Using one hybrid 3D-1D-3D approach for the conceptual design of WCCB blanket for CFETR

Energy Technology Data Exchange (ETDEWEB)

Jiang, Kecheng; Zhang, Xiaokang [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China); Li, Jia [University of Science and Technology of China, Hefei, Anhui, 230027 (China); Ma, Xuebin [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China); Liu, Songlin, E-mail: slliu@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China)

2017-01-15

Highlights: • The Hybrid 3D-1D-3D approach is used for radial building design of WCCB. • Nuclear heat obtained by this method agrees well with 3D neutronics results. • The final results of temperature and TBR satisfy with the requirements. • All the results show that this approach is high efficiency and high reliability. - Abstract: A hybrid 3D-1D-3D approach is proposed for the conceptual design of a blanket. Firstly, the neutron wall loading (NWL) of each blanket module is obtained through a neutronics calculation employing a 3D model, which contains the geometry outline of in-vacuum vessel components and the exact neutron source distribution. Secondly, a 1D cylindrical model with the blanket module containing a detailed radial building is adopted for the neutronics analysis, with the aim of calculating the tritium breeding ratio (TBR) and nuclear heating. Being normalized to the NWL, the nuclear heating is transferred to a 2D model for thermal-hydraulics analysis using the FLUENT code. Through a series analysis of nuclear-thermal iterations that considers the tritium breeding ratio (TBR) and thermal performance as optimization objectives, the optimized radial building of each module surrounding plasma can be obtained. Thirdly, the 3D structural design of each module is established by adding side walls, cover plates, stiffening plates, and other components based on the radial building. The 3D neutronics and thermal-hydraulics using the detailed blanket modules are re-analyzed. This approach has been successfully applied to the design of a water-cooled ceramic breeder blanket for the Chinese Fusion Engineering Test Reactor (CFETR). The radial building of each blanket module surrounding plasma is optimized. The global tritium breeding ratio (TBR) calculated by the 3D neutronics analysis is 1.21, and the temperature of all materials in the 3D blanket structure is below the upper limits. As indicated by the comparison of the 1D and 3D neutronics and thermal

ACE phenotyping in Gaucher disease.

Science.gov (United States)

Danilov, Sergei M; Tikhomirova, Victoria E; Metzger, Roman; Naperova, Irina A; Bukina, Tatiana M; Goker-Alpan, Ozlem; Tayebi, Nahid; Gayfullin, Nurshat M; Schwartz, David E; Samokhodskaya, Larisa M; Kost, Olga A; Sidransky, Ellen

2018-04-01

Gaucher disease is characterized by the activation of splenic and hepatic macrophages, accompanied by dramatically increased levels of angiotensin-converting enzyme (ACE). To evaluate the source of the elevated blood ACE, we performed complete ACE phenotyping using blood, spleen and liver samples from patients with Gaucher disease and controls. ACE phenotyping included 1) immunohistochemical staining for ACE; 2) measuring ACE activity with two substrates (HHL and ZPHL); 3) calculating the ratio of the rates of substrate hydrolysis (ZPHL/HHL ratio); 4) assessing the conformational fingerprint of ACE by evaluating the pattern of binding of monoclonal antibodies to 16 different ACE epitopes. We show that in patients with Gaucher disease, the dramatically increased levels of ACE originate from activated splenic and/or hepatic macrophages (Gaucher cells), and that both its conformational fingerprint and kinetic characteristics (ZPHL/HHL ratio) differ from controls and from patients with sarcoid granulomas. Furthermore, normal spleen was found to produce high levels of endogenous ACE inhibitors and a novel, tightly-bound 10-30 kDa ACE effector which is deficient in Gaucher spleen. The conformation of ACE is tissue-specific. In Gaucher disease, ACE produced by activated splenic macrophages differs from that in hepatic macrophages, as well as from macrophages and dendritic cells in sarcoid granulomas. The observed differences are likely due to altered ACE glycosylation or sialylation in these diseased organs. The conformational differences in ACE may serve as a specific biomarker for Gaucher disease. Copyright © 2018 Elsevier Inc. All rights reserved.

Verification and validation of ACE-format library created from ENDF/B-VII.0

International Nuclear Information System (INIS)

Chen Chaobin; Hu Zehua; Zhang Benai; Chen Yixue; Wu Jun

2009-01-01

ENDF/B-VII.0, released by the USA Cross Section Evaluation Working Group(CSEWG) in December 2006, was developed in five years since the previous release of ENDF/B-VI.8 and was demonstrated to contain much better physical representations of the data and to perform much better than previus ENDF evaluations over a broad range of applications. We generated ACE-format pointwise cross section library from the ENDF/B-VII.0 neutron reaction sublibrary with the processing code NJOY. The paper provides an overview of ENDF/B-VII.0, a summary of the ACE-format files producing process and a detail description of the validation of the ACE-format library. The conclusion is that the ACE-format library produced is correct. (authors)

Reduction in 14 MeV neutron generation rate by ICRF injection in D-3He burning plasmas

International Nuclear Information System (INIS)

Matsuura, Hideaki; Nakao, Yasuyuki

2004-01-01

The triton distribution function during ion cyclotron range of frequency (ICRF) waves injection in D- 3 He plasmas is examined by solving the 2-dimensional Fokker-Planck equation. Triton distribution function originally has a non-Maxwellian (tail) component around 1.01 MeV birth energy range due to D(d,p)T fusion reaction. Owing to the extension of the original tail by ICRF injection, the high-energy resonance tritons further increase, and the velocity-averaged T(d,n) 4 He fusion reaction rate coefficient, i.e. 14 MeV neutron generation rate, decreases from the values when triton is assumed to be Maxwellian. It is shown that when tritons absorb ∼1/200 of the fusion power from the waves in typical D- 3 He plasma, i.e. T=80 keV, n D =2x10 20 m -3 , τ E0 =3 sec and B=6T, the 14 MeV neutron generation rate is reduced by about ∼20% from the values for Maxwellian plasmas. (author)

ACE (I/D polymorphism and response to treatment in coronary artery disease: a comprehensive database and meta-analysis involving study quality evaluation

Directory of Open Access Journals (Sweden)

Kitsios Georgios

2009-06-01

Full Text Available Abstract Background The role of angiotensin-converting enzyme (ACE gene insertion/deletion (I/D polymorphism in modifying the response to treatment modalities in coronary artery disease is controversial. Methods PubMed was searched and a database of 58 studies with detailed information regarding ACE I/D polymorphism and response to treatment in coronary artery disease was created. Eligible studies were synthesized using meta-analysis methods, including cumulative meta-analysis. Heterogeneity and study quality issues were explored. Results Forty studies involved invasive treatments (coronary angioplasty or coronary artery by-pass grafting and 18 used conservative treatment options (including anti-hypertensive drugs, lipid lowering therapy and cardiac rehabilitation procedures. Clinical outcomes were investigated by 11 studies, while 47 studies focused on surrogate endpoints. The most studied outcome was the restenosis following coronary angioplasty (34 studies. Heterogeneity among studies (p ACE I/D polymorphism on the response to treatment for the rest outcomes (coronary events, endothelial dysfunction, left ventricular remodeling, progression/regression of atherosclerosis, individual studies showed significance; however, results were discrepant and inconsistent. Conclusion In view of available evidence, genetic testing of ACE I/D polymorphism prior to clinical decision making is not currently justified. The relation between ACE genetic variation and response to treatment in CAD remains an unresolved issue. The results of long-term and properly designed prospective studies hold the promise for pharmacogenetically tailored therapy in CAD.

Physics study of D-D/D-T neutron driven experimental subcritical assembly

International Nuclear Information System (INIS)

Sinha, Amar

2015-01-01

An experimental program to design and study external source driven subcritical assembly has been initiated at BARC. This program is aimed at understanding neutronic characteristics of accelerator driven system at low power level. In this series, a zero-power, sub-critical assembly driven by a D-D/D-T neutron generator has been developed. This system is modular in design and it is first in the series of subcritical assemblies being designed. The subcritical core consists of natural uranium fuel with high density polyethylene as moderator and beryllium oxide as reflector. The subcritical core is coupled to Purnima Neutron Generator. Preliminary experiments have been carried out for spatial flux measurement and reactivity estimation using pulsed neutron source (PNS) techniques. Further experiments are being planned to measure the reactivity and other kinetic parameters using noise methods. This facility would also be used for carrying out studies on effect of source importance and measurement of source multiplication factor k s and external neutron source efficiency φ* in great details. Some experiments with D-D and D-T neutrons have been presented. (author)

Association of ACTN3 R577X but not ACE I/D gene variants with elite rugby union player status and playing position.

Science.gov (United States)

Heffernan, S M; Kilduff, L P; Erskine, R M; Day, S H; McPhee, J S; McMahon, G E; Stebbings, G K; Neale, J P H; Lockey, S J; Ribbans, W J; Cook, C J; Vance, B; Raleigh, S M; Roberts, C; Bennett, M A; Wang, G; Collins, M; Pitsiladis, Y P; Williams, A G

2016-03-01

We aimed to quantify the ACE I/D and ACTN3 R577X (rs1815739) genetic variants in elite rugby athletes (rugby union and league) and compare genotype frequencies to controls and between playing positions. The rugby athlete cohort consisted of 507 Caucasian men, including 431 rugby union athletes that for some analyses were divided into backs and forwards and into specific positional groups: front five, back row, half backs, centers, and back three. Controls were 710 Caucasian men and women. Real-time PCR of genomic DNA was used to determine genotypes using TaqMan probes and groups were compared using χ(2) and odds ratio (OR) statistics. Correction of P values for multiple comparisons was according to Benjamini-Hochberg. There was no difference in ACE I/D genotype between groups. ACTN3 XX genotype tended to be underrepresented in rugby union backs (15.7%) compared with forwards (24.8%, P = 0.06). Interestingly, the 69 back three players (wings and full backs) in rugby union included only six XX genotype individuals (8.7%), with the R allele more common in the back three (68.8%) than controls (58.0%; χ(2) = 6.672, P = 0.04; OR = 1.60) and forwards (47.5%; χ(2) = 11.768, P = 0.01; OR = 2.00). Association of ACTN3 R577X with playing position in elite rugby union athletes suggests inherited fatigue resistance is more prevalent in forwards, while inherited sprint ability is more prevalent in backs, especially wings and full backs. These results also demonstrate the advantage of focusing genetic studies on a large cohort within a single sport, especially when intrasport positional differences exist, instead of combining several sports with varied demands and athlete characteristics. Copyright © 2016 the American Physiological Society.

Coupling of neutron transport equations. First results; Couplage d`equations en transport neutronique. premiere approche 1D monocinetique

Energy Technology Data Exchange (ETDEWEB)

Bal, G.

1995-07-01

To achieve whole core calculations of the neutron transport equation, we have to follow this 2 step method: space and energy homogenization of the assemblies; resolution of the homogenized equation on the whole core. However, this is no more valid when accidents occur (for instance depressurization causing locally strong heterogeneous media). One solution consists then in coupling two kinds of resolutions: a fine computation on the damaged cell (fine mesh, high number of energy groups) coupled with a coarse one everywhere else. We only deal here with steady state solutions (which already live in 6D spaces). We present here two such methods: The coupling by transmission of homogenized sections and the coupling by transmission of boundary conditions. To understand what this coupling is, we first restrict ourselves to 1D with respect to space in one energy group. The first two chapters deal with a recall of basic properties of the neutron transport equation. We give at chapter 3 some indications of the behaviour of the flux with respect to the cross sections. We present at chapter 4 some couplings and give some properties. Chapter 5 is devoted to a presentation of some numerical applications. (author). 9 refs., 7 figs.

The 3D tomographic image reconstruction software for prompt-gamma measurement of the boron neutron capture therapy

International Nuclear Information System (INIS)

Morozov, Boris; Auterinen, Iiro; Kotiluoto, Petri; Kortesniemi, Mika

2006-01-01

A tomographic imaging system based on the spatial distribution measurement of the neutron capture reaction during Boron Neutron Capture Therapy (BNCT) would be very useful for clinical purpose. Using gamma-detectors in a 2D-panel, boron neutron capture and hydrogen neutron capture gamma-rays emitted by the neutron irradiated region can be detected, and an image of the neutron capture events can be reconstructed. A 3D reconstruction software package has been written to support the development of a 3D prompt-gamma tomographic system. The package consists of three independent modules: phantom generation, reconstruction and evaluation modules. The reconstruction modules are based on algebraic approach of the iterative reconstruction algorithm (ART), and on the maximum likelihood estimation method (ML-EM). In addition to that, two subsets of the ART, the simultaneous iterative reconstruction technique (SIRT) and the component averaging algorithms (CAV) have been included to the package employing parallel codes for multiprocessor architecture. All implemented algorithms use two different field functions for the reconstruction of the region. One is traditional voxel function, another is, so called, blob function, smooth spherically symmetric generalized Kaiser-Bessel function. The generation module provides the phantom and projections with background by tracing the prompt gamma-rays for a given scanner geometry. The evaluation module makes statistical comparisons between the generated and reconstructed images, and provides figure-of-merit (FOM) values for the applied reconstruction algorithms. The package has been written in C language and tested under Linux and Windows platforms. The simple graphical user interface (GUI) is used for command execution and visualization purposed. (author)

Standard Test Method for Measuring Neutron Fluence and Average Energy from 3H(d,n)4He Neutron Generators by Radioactivation Techniques 1

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This test method covers a general procedure for the measurement of the fast-neutron fluence rate produced by neutron generators utilizing the 3H(d,n)4He reaction. Neutrons so produced are usually referred to as 14-MeV neutrons, but range in energy depending on a number of factors. This test method does not adequately cover fusion sources where the velocity of the plasma may be an important consideration. 1.2 This test method uses threshold activation reactions to determine the average energy of the neutrons and the neutron fluence at that energy. At least three activities, chosen from an appropriate set of dosimetry reactions, are required to characterize the average energy and fluence. The required activities are typically measured by gamma ray spectroscopy. 1.3 The measurement of reaction products in their metastable states is not covered. If the metastable state decays to the ground state, the ground state reaction may be used. 1.4 The values stated in SI units are to be regarded as standard. No oth...

A Detector for 2-D Neutron Imaging for the Spallation Neutron Source

International Nuclear Information System (INIS)

Britton, Charles L. Jr.; Bryan, W.L.; Wintenberg, Alan Lee; Clonts, Lloyd G.; Warmack, Robert J. Bruce; McKnight, Timothy E.; Frank, Steven Shane; Cooper, Ronald G.; Dudney, Nancy J.; Veith, Gabriel M.

2006-01-01

We have designed, built, and tested a 2-D pixellated thermal neutron detector. The detector is modeled after the MicroMegas-type structure previously published for collider-type experiments. The detector consists of a 4X4 square array of 1 cm 2 pixels each of which is connected to an individual preamplifier-shaper-data acquisition system. The neutron converter is a 10B film on an aluminum substrate. We describe the construction of the detector and the test results utilizing 252Cf sources in Lucite to thermalize the neutrons. Drift electrode (Aluminum) Converter (10B) 3 mm Conversion gap neutron (-900 V)

D-T neutron skyshine experiments at JAERI/FNS

Energy Technology Data Exchange (ETDEWEB)

Nishitani, Takeo; Ochiai, Kentaro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Yoshida, Shigeo [Tokai Univ., Hiratsuka, Kanagawa (JP)] (and others)

2003-03-01

The D-T neutron skyshine experiments have been carried out at the Fusion Neutronics Source (FNS) of JAERI with the neutron yield of {approx}1.7x10{sup 11} n/s. The concrete thickness of the roof and the wall of a FNS target room are 1.15 and 2 m, respectively. The FNS skyshine port with a size of 0.9x0.9 m{sup 2} was open during the experimental period. The radiation dose rate outside the target room was measured as far as about 550 m away from the D-T target point with a spherical rem-counter. The highest neutron dose was about 0.5 {mu}Sv/hr at a distance of 30 m from the D-T target point and the dose rate was attenuated to 0.002 {mu}Sv/hr at a distance of 550 m. The measured neutron dose distribution was analyzed with Monte Carlo code MCNP-4B and a simple line source model. The MCNP calculation overestimates the neutron dose in the distance range larger than 250 m. The neutron spectra were evaluated with a {sup 3}He detector with different thickness of polyethylene neutron moderators. Secondary gamma-rays were measured with high purity Ge detectors and NaI scintillation detectors. (author)

Simulation software of 3-D two-neutron energy groups for ship reactor with hexagonal fuel subassembly

International Nuclear Information System (INIS)

Zhang Fan; Cai Zhangsheng; Yu Lei; Gui Xuewen

2005-01-01

Core simulation software for 3-D two-neutron energy groups is developed. This software is used to simulate the ship reactor with hexagonal fuel subassembly after 10, 150 and 200 burnup days, considering the hydraulic and thermal feedback. It accurately simulates the characteristics of the fast and thermal neutrons and the detailed power distribution in a reactor under normal and abnormal operation condition. (authors)

POW3D-Neutron diffusion module of the AUS system. A user's manual

International Nuclear Information System (INIS)

Harrington, B.V.; Pollard, J.P.; Barry, J.M.

1996-11-01

POW3D is a three-dimensional neutron diffusion module of the AUS modular neutronics code system. It performs eigenvalue, source of feedback-free kinetics calculations. The module includes general criticality search options and extensive editing facilities including perturbation calculations. Output options include flux or reaction rate plot files. The code permits selection from one of a variety of different solution methods (MINI, ICCG or SLOR) for inner iterations with region re balance to enhance convergence. A MINI accelerated Gauss-Siedel method is used for upscatter iterations with group rebalance to enhance a convergence. Chebyshev source extrapolation is applied for outer iterations. A detailed index is included

Modification of Prototype D-D Neutron Generator

International Nuclear Information System (INIS)

Kim, In Jung; Kim, Suk Kwon; Park, Chang Su; Jung, Nam Suk; Jung, Hwa Dong; Park, Ji Young; Hwang, Yong Seok; Choi, H. D.

2005-01-01

The prototype D-D neutron generator was modified in order to enhance the neutron yield. The distance from ion source to target was reduced to increase the ion beam current at target position. Thick Ti target was replaced by thin Ti target which was vacuum-deposited on Cu substrate in order to enhance the target cooling. Performance of the modified device was tested

Use of the helium-3 proportional counter for neutron spectrometry; Utilisation du compteur proportionnel a helium 3 pour la spectrometrie des neutrons

Energy Technology Data Exchange (ETDEWEB)

Vialettes, H; Le Thanh, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-07-01

Up to now, two methods have been mainly used for neutron spectrometry near nuclear installations: - photographic emulsion spectrometry - the so-called, 'multisphere' technique spectrometry. The first method, which is fairly difficult to apply, has a threshold energy of about 500 keV; this is a big disadvantage for an apparatus which has to be used for spectrometry around nuclear installations where the neutron radiation is very much degraded energetically. The second method does not suffer from this disadvantage but the results which it yields are only approximate. In order to extend the energy range of the neutron spectra studied with sufficient accuracy the use of a helium-3 proportional counter has been considered. This report presents the principles of operation of the helium-3 spectrometer, and the calculation methods which make it possible to take into account the two main effects tending to deform the spectra obtained: - energy absorption by the walls of the counter, - energy loss of the incident neutrons due to elastic collisions with helium-3 nuclei. As an example of the application, the shape of the neutron spectrum emitted by a polonium-lithium source is given; the results obtained are in excellent agreement with theoretical predictions. (authors) [French] Jusqu'ici deux methodes ont ete utilisees principalement pour la spectrometrie des neutrons autour des installations nucleaires: - la spectrometrie par emulsions photographiques - la spectrometrie par la technique dite des multispheres. La premiere methode, d'un emploi assez delicat presente un seuil en energie d'environ 500 keV qui est un obstacle serieux a la spectrometrie autour des installations nucleaires ou le rayonnement neutronique est tres degrade en energie. La deuxieme methode ne presente pas cet inconvenient mais les resultats qu'elle permet d'obtenir ne sont qu'approches. Pour etendre la gamme d'energie des spectres de neutrons etudies avec une precision suffisante, l'utilisation du

Impact of I/D polymorphism of ACE gene on risk of development and course of chronic obstructive pulmonary disease.

Science.gov (United States)

Mlak, Radosław; Homa-Mlak, Iwona; Powrózek, Tomasz; Mackiewicz, Barbara; Michnar, Marek; Krawczyk, Paweł; Dziedzic, Marcin; Rubinsztajn, Renata; Chazan, Ryszarda; Milanowski, Janusz; Małecka-Massalska, Teresa

2016-04-01

Chronic obstructive pulmonary disease (COPD) affects more than 10% of the world's population over 40 years of age. The main exogenous risk factor is cigarette smoking; however, only 20% of smokers develop COPD, indicating that some other factors, e.g. genetic, may play an important role in the disease pathogenesis. Recent research indicates that ACE (angiotensin-converting enzyme) may be a susceptibility gene for asthma or COPD. The aim of our study was to determine the influence of I/D (insertion/deletion) polymorphism of the ACE gene (AluYa5, rs4646994) on the risk and course of COPD. We investigated ACE I/D polymorphism in 206 COPD and 165 healthy Caucasian subjects. In the generalized linear model (GLZ) analysis of the influence of selected factors on presence of COPD we found a significant independent effect for male sex (repeatedly increases the risk of COPD, OR = 7.7, p = 0.049), as well as smoking or lower body mass index, but only in combination with older age (OR = 0.96, p = 0.003 and OR = 1.005, p = 0.04 respectively). Interestingly, analysis of factors which may influence the risk of a higher number of exacerbations demonstrated that occurrence of DD genotype, but only in men, is associated with a lower risk (OR = 0.7, p = 0.03) of this complication. We suggest that ACE may not be a susceptibility gene for the origin of COPD but a disease-modifying gene. Since the impact of I/D polymorphism of the ACE gene on COPD risk is moderate or negligible, other molecular changes, that will help predict the development of this disease, should still be sought.

Assessment of the rs4340 ACE gene polymorphism in acute coronary syndrome in a Western Mexican population.

Science.gov (United States)

Valdez-Haro, A; Valle, Y; Valdes-Alvarado, E; Casillas-Muñoz, F; Muñoz-Valle, J F; Reynoso-Villalpando, G L; Flores-Salinas, H E; Padilla-Gutiérrez, J R

2017-09-27

Acute coronary syndrome (ACS) is considered one of the main causes of death worldwide. Contradictory findings concerning the impact of the angiotensin-converting enzyme (ACE) gene on cardiovascular diseases have been reported. Previous conclusions point out that the variability in results depends on ethnicity and genetic polymorphisms to determine the association of rs4340 polymorphisms of the ACE gene and ACE circulating levels in ACS. Genotyping of rs4340 polymorphisms was performed in a total of 600 individuals from Western Mexico divided into two groups: the ACS and the control group (CG). The polymorphisms were identified by polymerase chain reaction. Serum ACE concentration was determined by enzyme-linked immunosorbent assay. D/D carriers had higher ACE levels than I/I carriers (3.6 vs 2.8 ng/mL, P ACE concentration levels; however, the polymorphism was not associated with ACS.

Experimental subcritical facility driven by D-D/D-T neutron generator at BARC, India

Energy Technology Data Exchange (ETDEWEB)

Sinha, Amar, E-mail: image@barc.gov.in; Roy, Tushar; Kashyap, Yogesh; Ray, Nirmal; Shukla, Mayank; Patel, Tarun; Bajpai, Shefali; Sarkar, P.S.; Bishnoi, Saroj

2015-05-01

Highlights: •Experimental subcritical facility BRAHMMA coupled to D-D/D-T neutron generator. •Preliminary results of PNS experiments reported. •Feynman-alpha noise measurements explored with continuous source. -- Abstract: The paper presents design of an experimental subcritical assembly driven by D-D/D-T neutron and preliminary experimental measurements. The system has been developed for investigating the static and dynamic neutronic properties of accelerator driven sub-critical systems. This system is modular in design and it is first in the series of subcritical assemblies being designed. The subcritical core consists of natural uranium fuel with high density polyethylene as moderator and beryllium oxide as reflector. The fuel is embedded in high density polyethylene moderator matrix. Estimated k{sub eff} of the system is ∼0.89. One of the unique features of subcritical core is the use of Beryllium oxide (BeO) as reflector and HDPE as moderator making the assembly a compact modular system. The subcritical core is coupled to Purnima Neutron Generator which works in D-D and D-T mode with both DC and pulsed operation. It has facility for online source strength monitoring using neutron tagging and programmable source modulation. Preliminary experiments have been carried out for spatial flux measurement and reactivity estimation using pulsed neutron source (PNS) techniques with D-D neutrons. Further experiments are being planned to measure the reactivity and other kinetic parameters using noise methods. This facility would also be used for carrying out studies on effect of source importance and measurement of source multiplication factor k{sub s} and external neutron source efficiency φ{sup ∗} in great details. Experiments with D-T neutrons are also underway.

Fusion spectrum neutron source computation in "6LiD convertor for HFETR

International Nuclear Information System (INIS)

Sun Shouhua; Hu Yifei; Ye Bin

2014-01-01

A computation model of 14 MeV neutron from the "6LiD convertor has been established, the 14 MeV neutron sources and flux in the irradiation samples from the "6LiD convertor and the core have been computed separately, the neutron spectrum in the irradiation samples have been computed, too. The results show that the neutron sources that over 13 MeV account for 1 MeV above in the "6LiD convertor is 25.7%, 24.6% respectively, 14 MeV neutron sources get 4.31 × 10"1"3 n_T·s"-"1, 3.34 × 10"1"3 n_T·s"-"1, 14 MeV neutron flux get 2.66 × 10"1"0 n_T·cm"-"2·s"-"1, 3.53 × 10"1"0 n_T·cm"-"2·s"-"1, as He and H_2O charged in the irradiation capsule. (authors)

Individual and combined influence of ACE and ACTN3 genes on muscle phenotypes in Polish athletes.

Science.gov (United States)

Orysiak, Joanna; Mazur-Różycka, Joanna; Busko, Krzysztof; Gajewski, Jan; Szczepanska, Beata; Malczewska-Lenczowska, Jadwiga

2017-02-08

The aim of this study was to examine the association between ACE and ACTN3 genes, independently or in combination, and muscle strength and power in male and female athletes. The study involved 398 young male (n=266) and female (n=132) athletes representing various sport disciplines (ice hockey, canoeing, swimming, volleyball). All were Caucasians. The following measurements were taken: height of jump and mechanical power in countermovement jump (CMJ) and spike jump (SPJ), and muscle strength of 10 muscle groups (flexors and extensors of the elbow, shoulder, hip, knee and trunk). The ID polymorphism of ACE and the R577X polymorphism of ACTN3 were typed using PCR (polymerase chain reaction) and PCR-RFLP (polymerase chain reaction - restriction fragment length polymorphism), respectively. The genotype distribution of the ACE and ACTN3 genes did not differ significantly between groups of athletes for either sex. There was no association between ACE and ACTN3 genotypes (alone or in combination) and sum of muscle strength, height of jump or mechanical power in both jump tests (CMJ and SPJ) for male and female athletes. These findings do not support an influential role of the ACE and ACTN3 genes in determining power/strength performance of elite athletes.

TAC-3D, 3-D Steady-State and Transient Heat Transfer in X-Y-Z and R-Theta-Z Geometry

International Nuclear Information System (INIS)

Petersen, J.F.

1972-01-01

1 - Description of problem or function: TAC3D is designed to treat transient, three-dimensional heat transfer problems. Steady-state problems are treated by considering the problem to be a transient, starting with an assumed temperature distribution and running until equilibrium conditions are established. Geometrically, the problem may be defined by either rectangular (x,y,z) or cylindrical (r,z,theta) coordinates. 2 - Method of solution: The heat conduction equation is replaced by an equivalent set of linear finite-difference equations. These are solved by an implicit alternating-direction scheme which requires a regular geometry in that the points at which temperatures are to be calculated must be in regular rows, columns, and planes. As a consequence, TAC3D is primarily suited to solve problems that roughly fit an envelope of either a rectangular parallelepiped or an incomplete right circular cylinder. 3 - Restrictions on the complexity of the problem: (a) The grid plane system must be orthogonal in the rectangular or cylindrical coordinate system. Therefore, the sides of the nodal elements must also be orthogonal. The entire problem must be bounded by 6 grid planes on one of the coordinate systems. Difficulties in treating irregular boundaries can be overcome to some extent through the use of materials having specially chosen properties. (b) All radiation is treated one-dimensionally. (c) There are no provisions for thermal expansion or change of phase Such special heat transfer situations could be included by extensions of the existing programming

ACE genotype, phenotype and all-cause mortality in different cohorts of patients with type 1 diabetes

DEFF Research Database (Denmark)

Færch, Louise H; Sejling, Anne-Sophie; Lajer, Maria

2015-01-01

AIMS: Carrying the D-allele of the angiotensin-converting enzyme (ACE) I/D polymorphism and high ACE activity are prognostic factors in diabetic nephropathy, which predicts mortality in type 1 diabetes. We studied the association between the ACE D-allele and ACE phenotype and long-term all-cause ...

Towards a 3-D magnetometry by neutron reflectometry

Energy Technology Data Exchange (ETDEWEB)

Fermon, C. [CEA/Saclay, Dept. de Recherche sur l' Etat Condense, les Atomes et les Molecules (DRECAM), 91 - Gif-sur-Yvette (France); Gilles, B. [Ecole Nationale Superieure d' Electrochimie et d' Electrometallurgie, 38 - Grenoble (France). Lab. de Thermodynamique et Physico-Chimie Metallurgiques; Marty, A. [CEA Grenoble, Dept. de Recherche Fondamentale sur la Matiere Condensee (DRFMC), 38 (France); Ott, F.; Menelle, A. [Laboratoire Leon Brillouin (LLB) - CEA/Saclay, 91 - Gif-sur-Yvette (France)

1998-07-01

Polarised Neutron reflectometry with spin analysis allows one to probe the in-depth magnetic profiles of thin films down to about 100 nm. Analysis of specular reflections gives access to the in-plane vectorial absolute magnetic moment. Off-specular reflectometry gives information about lateral contrasts with typical lengths ranging from 5 {mu}m to 100 {mu}m. Furthermore, surface diffraction at grazing angle gives access to transverse dimensions between 10 nm and 300 nm with a resolution in that direction of several nm. The combination of these 3 techniques applied to thin magnetic objects like thin films, arrays of lines or arrays of dots, leads to 3-D patterns in the reciprocal space. The method is extremely sensitive while giving the average on a rather large surface. Such a technique is therefore not applicable for the study of a single magnetic dot, but it generates unique results in several cases including patterns of domain walls in thin films with perpendicular anisotropy, arrays of magnetic dots, patterned fines in magnetic thin films. (authors)

A D-D/D-T fusion reaction based neutron generator system for liver tumor BNCT

International Nuclear Information System (INIS)

Koivunoro, H.; Lou, T.P.; Leung, K. N.; Reijonen, J.

2003-01-01

Boron-neutron capture therapy (BNCT) is an experimental radiation treatment modality used for highly malignant tumor treatments. Prior to irradiation with low energetic neutrons, a 10B compound is located selectively in the tumor cells. The effect of the treatment is based on the high LET radiation released in the 10 B(n,α) 7 Li reaction with thermal neutrons. BNCT has been used experimentally for brain tumor and melanoma treatments. Lately applications of other severe tumor type treatments have been introduced. Results have shown that liver tumors can also be treated by BNCT. At Lawrence Berkeley National Laboratory, various compact neutron generators based on D-D or D-T fusion reactions are being developed. The earlier theoretical studies of the D-D or D-T fusion reaction based neutron generators have shown that the optimal moderator and reflector configuration for brain tumor BNCT can be created. In this work, the applicability of 2.5 MeV neutrons for liver tumor BNCT application was studied. The optimal neutron energy for external liver treatments is not known. Neutron beams of different energies (1eV < E < 100 keV) were simulated and the dose distribution in the liver was calculated with the MCNP simulation code. In order to obtain the optimal neutron energy spectrum with the D-D neutrons, various moderator designs were performed using MCNP simulations. In this article the neutron spectrum and the optimized beam shaping assembly for liver tumor treatments is presented

Alu insertion/deletion of ACE gene polymorphism might not affect ...

African Journals Online (AJOL)

Widodo

2016-09-03

Sep 3, 2016 ... a Biology Department, Faculty of Mathematics and Natural Sciences, Brawijaya ... Subjects and methods: The serum bradykinin and I/D polymorphism have been ..... Japanese hypertensive patients receiving an ACE inhibitor.

Polymorphisms in ACE and ACTN3 Genes and Blood Pressure Response to Acute Exercise in Elite Male Athletes from Serbia.

Science.gov (United States)

Durmic, Tijana S; Zdravkovic, Marija D; Djelic, Marina N; Gavrilovic, Tamara D; Djordjevic Saranovic, Slavica A; Plavsic, Jadranka N; Mirkovic, Sanja V; Batinic, Djordje V; Antic, Milena N; Mihailovic, Zoran R; Atanasijevic, Nikola G; Mileusnic, Milan J; Stojkovic, Oliver V

2017-12-01

Physiological adaptations to various types of prolonged and intensive physical activity, as seen in elite athletes from different sports, include changes in blood pressure (BP) response to acute exercise. Also, functional polymorphisms of the angiotensin I converting enzyme (ACE) and alfa-actinin-3 (ACTN3) genes are shown to be associated with BP parameters changes, both in athletes and sedentary population. In this study, an Alu insertion (I)/deletion (D) polymorphism in ACE gene, as well as nonsense mutation in the gene encoding ACTN3 have been scored in 107 elite Serbian athletes classified according to their sporting discipline to power/sprint (short distance runners/swimmers), endurance (rowers, footballers, middle-distance swimmers) or mixed sports (water polo, handball, volleyball players). Presence of nonfunctional allele in ACTN3 is associated with significantly increased maximal systolic BP (SBPmax, p = 0.04). Athletes with Alu insertion in ACE had significantly (p = 0.006) larger decline of systolic BP after 3 minutes of recovery (SBPR3), calculated as the percentage of maximal SBP response during exercise stress testing. Concomitant presence of non-functional variant in ACTN3 gene decreased this beneficiary effect of ACE mutation on SBPR3. Long term enrollment in power/sprint sports significantly increased resting diastolic BP (DBPrest: 74 mmHg) and SBPmax (197 mmHg) and improved SBPR3 (74.8%) compared to enrolment in endurance (72 mmHg; 178 mmHg; 81.1%) and mixed sports (69 mmHg; 185 mmHg; 80.0%). Lack of the effect of genotype by sport interaction on BP parameters suggests that the long-term effects of different disciplines on BP are not mediated by these two genes.

Radiative capture of neutrons by deuterons n+d → 3H+γ and P-odd nuclear forces

International Nuclear Information System (INIS)

Rekalo, M.P.

1987-01-01

P odd polarization phenomena in neutron radiative capture with deuterons, n+d → 3 H+γ have been studied. It is shown, that in a general case during collisions of arbitrarily polarized neutrons with a deuteron target characterized with vector and tensor polarizations, 18 different P odd asymmetries of gamma quanta angular distribution appear. P odd contribution to density matrix of gamma quanta produced in polarized neutron capture with nonpolarized deuterons is determined by 8 substantial structural functions and P odd dependence of photon Stokes parameters on deuteron tensor polarization is characterized in a general case with ten structure functions. The number of P odd correlations decreases when capturing slow neutrons

Transport of D-D fusion neutrons in thick concrete

International Nuclear Information System (INIS)

Ku, L.P.; Kolibal, J.G.

1982-07-01

By altering the collision mechanism in the numerical transport calculations, and by constructing an analytical model based on age-diffusion theory, the outstanding feature in the life history of D-D fusion neutrons penetrating deeply into ordinary concrete is shown to be the transport in the 2.3 MeV oxygen anti-resonance. This result is used to assess the impact of the cross-section uncertainties and the uncertainties due to variations in the D-D fusion spectrum and temperature

Cranial nerve assessment in cavernous sinus tumors with contrast-enhanced 3D fast-imaging employing steady-state acquisition MR imaging

Energy Technology Data Exchange (ETDEWEB)

Amemiya, Shiori; Aoki, Shigeki; Ohtomo, Kuni [University of Tokyo, Department of Radiology, Graduate School of Medicine, Bunkyo-ku, Tokyo (Japan)

2009-07-15

The purpose of this study is to apply contrast-enhanced 3D fast-imaging employing steady-state acquisition (3D-FIESTA) imaging to the evaluation of cranial nerves (CN) in patients with cavernous sinus tumors. Contrast-enhanced 3D-FIESTA images were acquired from ten patients with cavernous sinus tumors with a 3-T unit. In all cases, the trigeminal nerve with tumor involvement was easily identified in the cavernous portions. Although oculomotor and abducens nerves were clearly visualized against the tumor area with intense contrast enhancement, they were hardly identifiable within the area lacking contrast enhancement. The trochlear nerve was visualized in part, but not delineated as a linear structure outside of the lesion. Contrast-enhanced 3D-FIESTA can be useful in the assessment of cranial nerves in and around the cavernous sinus with tumor involvement. (orig.)

Cranial nerve assessment in cavernous sinus tumors with contrast-enhanced 3D fast-imaging employing steady-state acquisition MR imaging

International Nuclear Information System (INIS)

Amemiya, Shiori; Aoki, Shigeki; Ohtomo, Kuni

2009-01-01

The purpose of this study is to apply contrast-enhanced 3D fast-imaging employing steady-state acquisition (3D-FIESTA) imaging to the evaluation of cranial nerves (CN) in patients with cavernous sinus tumors. Contrast-enhanced 3D-FIESTA images were acquired from ten patients with cavernous sinus tumors with a 3-T unit. In all cases, the trigeminal nerve with tumor involvement was easily identified in the cavernous portions. Although oculomotor and abducens nerves were clearly visualized against the tumor area with intense contrast enhancement, they were hardly identifiable within the area lacking contrast enhancement. The trochlear nerve was visualized in part, but not delineated as a linear structure outside of the lesion. Contrast-enhanced 3D-FIESTA can be useful in the assessment of cranial nerves in and around the cavernous sinus with tumor involvement. (orig.)

BARS - a heterogeneous code for 3D pin-by-pin LWR steady-state and transient calculation

International Nuclear Information System (INIS)

Avvakumov, A.V.; Malofeev, V.M.

2000-01-01

A 3D pin-by-pin dynamic model for LWR detailed calculation was developed. The model is based on a coupling of the BARS neutronic code with the RELAP5/MOD3.2 thermal hydraulic code. This model is intended to calculate a fuel cycle, a xenon transient, and a wide range of reactivity initiated accidents in a WWER and a PWR. Galanin-Feinberg heterogeneous method was realized in the BARS code. Some results for a validation of the heterogeneous method are presented for reactivity coefficients, a pin-by-pin power distribution, and a fast pulse transient. (Authors)

Reactor Neutron Sources

International Nuclear Information System (INIS)

Aksenov, V.L.

1994-01-01

The present status and the prospects for development of reactor neutron sources for neutron scattering research in the world are considered. The fields of application of neutron scattering relative to synchrotron radiation, the creation stages of reactors (steady state and pulsed) and their position in comparison with spallation neutron sources at present and in the foreseen future are discussed. (author). 15 refs.; 8 figs.; 3 tabs

Electron trapping in neutron-irradiated very thin films of Al2O3

International Nuclear Information System (INIS)

Srivastava, P.C.; Bardhan, A.R.

1979-01-01

Oxide layers of thicknesses less than 100 A have been prepared by thermal-oxidation of a base metal electrode film of aluminium. These films were then neutron-irradiated from a laboratory Ra-Be source to a fluence of approximately 10 11 neutrons cm -2 and the sandwich structure, Al-Al 2 O 3 -Au, was completed by depositing a thin metal film of gold over the irradiated oxide layer. D.C. steady and transient flow through the sandwich structures have been studied. Results obtained in the experiments with irradiated sandwiches have been compared with unirradiated ones to show that traps are introduced because of the damage caused by the incident neutrons. Transient voltage measurement across the junction gives a trap density of approximately 10 18 cm -3 . A capture cross-section of the order 10 -28 cm 2 is estimated for the traps. It is found that the (identified) traps are uniformly distributed within an energy of 0.099 eV below the conduction band edge of aluminium oxide. The physical nature of the traps is discussed by comparing the capture cross-sections of the physically known trapping centres. The possibility of vacancies or F-centres acting as traps (for the identified ones) has been suggested. (author)

Fully anisotropic goal-oriented mesh adaptation for 3D steady Euler equations

Science.gov (United States)

Loseille, A.; Dervieux, A.; Alauzet, F.

2010-04-01

This paper studies the coupling between anisotropic mesh adaptation and goal-oriented error estimate. The former is very well suited to the control of the interpolation error. It is generally interpreted as a local geometric error estimate. On the contrary, the latter is preferred when studying approximation errors for PDEs. It generally involves non local error contributions. Consequently, a full and strong coupling between both is hard to achieve due to this apparent incompatibility. This paper shows how to achieve this coupling in three steps. First, a new a priori error estimate is proved in a formal framework adapted to goal-oriented mesh adaptation for output functionals. This estimate is based on a careful analysis of the contributions of the implicit error and of the interpolation error. Second, the error estimate is applied to the set of steady compressible Euler equations which are solved by a stabilized Galerkin finite element discretization. A goal-oriented error estimation is derived. It involves the interpolation error of the Euler fluxes weighted by the gradient of the adjoint state associated with the observed functional. Third, rewritten in the continuous mesh framework, the previous estimate is minimized on the set of continuous meshes thanks to a calculus of variations. The optimal continuous mesh is then derived analytically. Thus, it can be used as a metric tensor field to drive the mesh adaptation. From a numerical point of view, this method is completely automatic, intrinsically anisotropic, and does not depend on any a priori choice of variables to perform the adaptation. 3D examples of steady flows around supersonic and transsonic jets are presented to validate the current approach and to demonstrate its efficiency.

TORT-TD/ATTICA3D: a coupled neutron transport and thermal hydraulics code system for 3-D transient analysis of gas cooled high temperature reactors

International Nuclear Information System (INIS)

Lapins, J.; Seubert, A.; Buck, M.; Bader, J.; Laurien, E.

2011-01-01

Comprehensive safety studies of high temperature gas cooled reactors (HTR) require full three dimensional coupled treatments of both neutron kinetics and thermal-hydraulics. In a common effort, GRS and IKE developed the coupled code system TORT-TD/ATTICA3D for pebble bed type HTR that connects the 3-D transient discrete-ordinates transport code TORT-TD with the 3-D porous medium thermal-hydraulics code ATTICA3D. In this paper, the physical models and calculation capabilities of TORT-TD and ATTICA3D are presented, focusing on model improvements in ATTICA3D and extensions made in TORT-TD related to HTR application. For first applications, the OECD/NEA/NSC PBMR-400 benchmark has been chosen. Results obtained with TORT-TD/ATTICA3D will be shown for transient exercises, e.g. control rod withdrawal and a control rod ejection. Results are compared to other benchmark participants' solutions with special focus on fuel temperature modelling features of ATTICA3D. The provided “grey-curtain” nuclear cross section libraries have been used. First results on 3-D effects during a control rod withdrawal transient will be presented. (author)

Verification of 3-D generation code package for neutronic calculations of WWERs

International Nuclear Information System (INIS)

Sidorenko, V.D.; Aleshin, S.S.; Bolobov, P.A.; Bolshagin, S.N.; Lazarenko, A.P.; Markov, A.V.; Morozov, V.V.; Syslov, A.A.; Tsvetkov, V.M.

2000-01-01

Materials on verification of the 3 -d generation code package for WWERs neutronic calculations are presented. The package includes: - spectral code TVS-M; - 2-D fine mesh diffusion code PERMAK-A for 4- or 6-group calculation of WWER core burnup; - 3-D coarse mesh diffusion code BIPR-7A for 2-group calculations of quasi-stationary WWERs regimes. The materials include both TVS-M verification data and verification data on PERMAK-A and BIPR-7A codes using constant libraries generated with TVS-M. All materials are related to the fuel without Gd. TVS-M verification materials include results of comparison both with benchmark calculations obtained by other codes and with experiments carried out at ZR-6 critical facility. PERMAK-A verification materials contain results of comparison with TVS-M calculations and with ZR-6 experiments. BIPR-7A materials include comparison with operation data for Dukovany-2 and Loviisa-1 NPPs (WWER-440) and for Balakovo NPP Unit 4 (WWER-1000). The verification materials demonstrate rather good accuracy of calculations obtained with the use of code package of the 3 -d generation. (Authors)

A neutron monitor for D-T neutron generator in the PGNAA-based online measurement system

Science.gov (United States)

Shan, Qing; Shengnan, Chu; Yongsheng, Ling; Pingkun, Cai; Wenbao, Jia

2017-06-01

A new type of neutron detector, which consists of polyethylene, an EJ200 plastic scintillator and fused silica, was proposed and optimized by the GEANT4 Monte Carlo simulation toolkit in our previous studies. The calculation method was also described for calculating the neutron flux in the preset condition. This paper reports the manufacturing of the prototype detector. Experiments are conducted to validate the feasibility of this detector. A D-T neutron generator and a 60Co gamma-ray source are used in the experiments. The designed detector and a He-3 proportional counter are simultaneously used to monitor the yield of the D-T neutron generator. A more universal calculation method is developed to enable the application of this detector to common conditions. The experimental results show that the performance of the designed detector is comparable to that of the He-3 proportional counter. The relative deviations between their normalized counts are less than 5%.

Adsorbed Layers of D2, H2, O2, and 3He on Graphite Studied by Neutron Scattering

DEFF Research Database (Denmark)

Nielsen, Mourits; McTague, J. P.; Ellenson, W. D.

1977-01-01

The phase diagrams of adsorbed monolayers of D2, H2, O2, and 3He on graphite have been measured by neutron diffraction. H2 and D2-layers have a registered √3 structure at low coverages, and at monolayer completion they have a dense triangular structure, which is incommensurate with the substrate...

Development of a new deuterium-deuterium (D-D) neutron generator for prompt gamma-ray neutron activation analysis.

Science.gov (United States)

Bergaoui, K; Reguigui, N; Gary, C K; Brown, C; Cremer, J T; Vainionpaa, J H; Piestrup, M A

2014-12-01

A new deuterium-deuterium (D-D) neutron generator has been developed by Adelphi Technology for prompt gamma neutron activation analysis (PGNAA), neutron activation analysis (NAA), and fast neutron radiography. The generator makes an excellent fast, intermediate, and thermal neutron source for laboratories and industrial applications that require the safe production of neutrons, a small footprint, low cost, and small regulatory burden. The generator has three major components: a Radio Frequency Induction Ion Source, a Secondary Electron Shroud, and a Diode Accelerator Structure and Target. Monoenergetic neutrons (2.5MeV) are produced with a yield of 10(10)n/s using 25-50mA of deuterium ion beam current and 125kV of acceleration voltage. The present study characterizes the performance of the neutron generator with respect to neutron yield, neutron production efficiency, and the ionic current as a function of the acceleration voltage at various RF powers. In addition the Monte Carlo N-Particle Transport (MCNP) simulation code was used to optimize the setup with respect to thermal flux and radiation protection. Copyright © 2014 Elsevier Ltd. All rights reserved.

Elevated ACE activity is not associated with asthma, COPD, and COPD co-morbidity

DEFF Research Database (Denmark)

Lee, Julie; Nordestgaard, Børge G; Dahl, Morten

2009-01-01

The angiotensin-converting enzyme (ACE) gene is a potential candidate gene for risk of asthma, COPD, and COPD co-morbidity. In 9034 Danish adults, we determined whether individuals homozygous or heterozygous for the ACE D allele are at greater risk of asthma, COPD, or COPD co-morbidity compared...... with ACE II homozygous individuals. In the general population, serum ACE activity increased with the number of D alleles (Kruskal-Wallis ANOVA: II vs. ID, p....4-1.2). The results were similar upon adjustment for sex, age, smoking status, body mass index, total cholesterol, and ACE inhibitor/angiotensin II type 1 receptor blocker use. These data suggest that lifelong genetically elevated ACE activity is not a major risk factor for asthma or COPD, or for ischemic heart...

Investigations on neutron irradiated 3D carbon fibre reinforced carbon composite material

Science.gov (United States)

Venugopalan, Ramani; Alur, V. D.; Patra, A. K.; Acharya, R.; Srivastava, D.

2018-04-01

As against conventional graphite materials carbon-carbon (C/C) composite materials are now being contemplated as the promising candidate materials for the high temperature and fusion reactor owing to their high thermal conductivity and high thermal resistance, better mechanical/thermal properties and irradiation stability. The current need is for focused research on novel carbon materials for future new generation nuclear reactors. The advantage of carbon-carbon composite is that the microstructure and the properties can be tailor made. The present study encompasses the irradiation of 3D carbon composite prepared by reinforcement using PAN carbon fibers for nuclear application. The carbon fiber reinforced composite was subjected to neutron irradiation in the research reactor DHRUVA. The irradiated samples were characterized by Differential Scanning Calorimetry (DSC), small angle neutron scattering (SANS), XRD and Raman spectroscopy. The DSC scans were taken in argon atmosphere under a linear heating program. The scanning was carried out at temperature range from 30 °C to 700 °C at different heating rates in argon atmosphere along with reference as unirradiated carbon composite. The Wigner energy spectrum of irradiated composite showed two peaks corresponding to 200 °C and 600 °C. The stored energy data for the samples were in the range 110-170 J/g for temperature ranging from 30 °C to 700 °C. The Wigner energy spectrum of irradiated carbon composite did not indicate spontaneous temperature rise during thermal annealing. Small angle neutron scattering (SANS) experiments have been carried out to investigate neutron irradiation induced changes in porosity of the composite samples. SANS data were recorded in the scattering wave vector range of 0.17 nm-1 to 3.5 nm-1. Comparison of SANS profiles of irradiated and unirradiated samples indicates significant change in pore morphology. Pore size distributions of the samples follow power law size distribution with

NESTLE: Few-group neutron diffusion equation solver utilizing the nodal expansion method for eigenvalue, adjoint, fixed-source steady-state and transient problems

International Nuclear Information System (INIS)

Turinsky, P.J.; Al-Chalabi, R.M.K.; Engrand, P.; Sarsour, H.N.; Faure, F.X.; Guo, W.

1994-06-01

NESTLE is a FORTRAN77 code that solves the few-group neutron diffusion equation utilizing the Nodal Expansion Method (NEM). NESTLE can solve the eigenvalue (criticality); eigenvalue adjoint; external fixed-source steady-state; or external fixed-source. or eigenvalue initiated transient problems. The code name NESTLE originates from the multi-problem solution capability, abbreviating Nodal Eigenvalue, Steady-state, Transient, Le core Evaluator. The eigenvalue problem allows criticality searches to be completed, and the external fixed-source steady-state problem can search to achieve a specified power level. Transient problems model delayed neutrons via precursor groups. Several core properties can be input as time dependent. Two or four energy groups can be utilized, with all energy groups being thermal groups (i.e. upscatter exits) if desired. Core geometries modelled include Cartesian and Hexagonal. Three, two and one dimensional models can be utilized with various symmetries. The non-linear iterative strategy associated with the NEM method is employed. An advantage of the non-linear iterative strategy is that NSTLE can be utilized to solve either the nodal or Finite Difference Method representation of the few-group neutron diffusion equation

SU-F-T-22: Clinical Implications When Using TG-186 (ACE) Heterogeneity Software

Energy Technology Data Exchange (ETDEWEB)

Likhacheva, A; Grade, E; Sadeghi, A; Sokolowski, T [Arizona Cancer Specialists, Mesa, AZ (United States)

2016-06-15

Purpose: The purpose of this study is to compare dosimetric calculations using traditional TG-43 formalism and Oncentra Brachy Advanced Collapsed cone Engine (ACE) TG-186 calculation algorithm in clinical setting. Methods: We analyzed dosimetry of four patients treated with accelerated partial breast irradiation using a multi-channel intracavitary device (SAVI). All patients were treated to 34 Gy in 10 fractions using a high-dose-rate (192) Ir source. The plans were designed and treated using the TG-43 model. ACE was used to assess the effect heterogeneity correction on various dosimetric parameters. Mass density was estimated using Hounsfield units. Results: Compared to TG-43 formalism, ACE estimated lower doses to targets and organs at risk. The mean difference was 19.8% (range 15.3–24.1%) for PTV-eval V200, 12.0% (range 9.7–17.7%) for PTV-eval V150, 4.3% (range 3.3–6.5%) for PTV-eval D95, 3.3% (range 1.4–5.4%) for PTV-eval D90, 5.4% (range 2.9–9.9%) for maximum rib dose, and 5.7% (2.4–7.4%) for maximum skin dose. There was no correlation between the magnitude of the difference and the PTV-eval volume, air volume, or tissue-applicator conformance. Conclusion: Based on our preliminary study, the TG-43 algorithm appears to overestimate the dose to targets and organs at risk when compared to the ACE TG-186 software. We hypothesize that air adjacent to the SAVI struts contributes to lack of scatter thereby contributing a significant difference in dose calculation when using ACE. We believe that ACE calculation provides a more realistic isodose distribution than TG-43. We plan to further investigate the impact of heterogeneity correction on brachytherapy planning for a wide variety of clinical scenarios, include skin, cervix/uterus, prostate, and lung.

ACE Insertion/Deletion Polymorphism and Diabetic Nephropathy: Clinical Implications of Genetic Information

Directory of Open Access Journals (Sweden)

Sung-Kyu Ha

2014-01-01

Full Text Available Approximately 20–40% of diabetic patients develop nephropathy which is the leading cause of ESRD in developed countries. The ACE I/D polymorphism is thought to be a marker for functional polymorphism which regulates circulating and tissue ACE activity. While the initial study found a protective effect of the II genotype on the development of nephropathy in IDDM patients, subsequent studies have addressed the role of ACE I/D polymorphism in the development and progression of diabetic nephropathy. RAAS blockers are the first line drugs for the treatment hypertension associated with diabetes and have been widely used in everyday clinical practice for the purpose of reducing proteinuria in patients with various renal diseases. However, the antiproteinuric effect of RAAS blockers is variable and the percentage of reducing proteinuria is in the range of 20–80%. The antiproteinuric effect of RAAS blockers may be related to a number of factors: the type or the dose of RAAS blockers, the duration of therapy, the level of sodium intake, and the type of patient’s ACE I/D genotype. Besides the nongenetic factors, drug responses, can be influenced by ACE gene polymorphism. In this review, we discuss the relationship between ACE I/D polymorphism and diabetic nephropathy and therapeutic response of RAAS blockers.

Monte Carlo simulation of explosive detection system based on a Deuterium-Deuterium (D-D) neutron generator.

Science.gov (United States)

Bergaoui, K; Reguigui, N; Gary, C K; Brown, C; Cremer, J T; Vainionpaa, J H; Piestrup, M A

2014-12-01

An explosive detection system based on a Deuterium-Deuterium (D-D) neutron generator has been simulated using the Monte Carlo N-Particle Transport Code (MCNP5). Nuclear-based explosive detection methods can detect explosives by identifying their elemental components, especially nitrogen. Thermal neutron capture reactions have been used for detecting prompt gamma emission (10.82MeV) following radiative neutron capture by (14)N nuclei. The explosive detection system was built based on a fully high-voltage-shielded, axial D-D neutron generator with a radio frequency (RF) driven ion source and nominal yield of about 10(10) fast neutrons per second (E=2.5MeV). Polyethylene and paraffin were used as moderators with borated polyethylene and lead as neutron and gamma ray shielding, respectively. The shape and the thickness of the moderators and shields are optimized to produce the highest thermal neutron flux at the position of the explosive and the minimum total dose at the outer surfaces of the explosive detection system walls. In addition, simulation of the response functions of NaI, BGO, and LaBr3-based γ-ray detectors to different explosives is described. Copyright © 2014 Elsevier Ltd. All rights reserved.

Multiple ace genes encoding acetylcholinesterases of Caenorhabditis elegans have distinct tissue expression.

Science.gov (United States)

Combes, Didier; Fedon, Yann; Toutant, Jean-Pierre; Arpagaus, Martine

2003-08-01

ace-1 and ace-2 genes encoding acetylcholinesterase in the nematode Caenorhabditis elegans present 35% identity in coding sequences but no homology in noncoding regions (introns, 5'- and 3'-untranslated regions). A 5'-region of ace-2 was defined by rescue of ace-1;ace-2 mutants. When green fluorescent protein (GFP) expression was driven by this regulatory region, the resulting pattern was distinct from that of ace-1. This latter gene is expressed in all body-wall and vulval muscle cells (Culetto et al., 1999), whereas ace-2 is expressed almost exclusively in neurons. ace-3 and ace-4 genes are located in close proximity on chromosome II (Combes et al., 2000). These two genes were first transcribed in vivo as a bicistronic messenger and thus constitute an ace-3;ace-4 operon. However, there was a very low level of monocistronic mRNA of ace-4 (the upstream gene) in vivo, and no ACE-4 enzymatic activity was ever detected. GFP expression driven by a 5' upstream region of the ace-3;ace-4 operon was detected in several muscle cells of the pharynx (pm3, pm4, pm5 and pm7) and in the two canal associated neurons (CAN cells). A dorsal row of body-wall muscle cells was intensively labelled in larval stages but no longer detected in adults. The distinct tissue-specific expression of ace-1, ace-2 and ace-3 (coexpressed only in pm5 cells) indicates that ace genes are not redundant.

Study on the 21 MeV neutron flux characteristics obtained in the 3H(d,n)4He reaction using of gas target

International Nuclear Information System (INIS)

Lovchikova, G.N.; Polyakov, A.V.; Sal'nikov, O.A.; Simakov, S.P.; Sukhikh, S.Eh.; Trufanov, A.M.

1983-01-01

The possibility to use gas tritium target as neutron source with the energy 2 MeV for nuclear-physical studies has been considered. Characteristics of neutron flux crested in the reaction 3 H(d, n) 4 He to obtain neutrons are investigated. The study of inelastic scattering processes at the energies permits to expand the experiments conducted up to the present day on the study of spectra of inelastically scattered neutrons in a lower energy region and it is of interest for the clarification of appearance mechanism of high-energy neutrons in the spectra. Characteristics of neutron flux as a result of the reaction 3 (α, n) 4 He at the energy of falling deuterons Esub(d)=5.54 MeV are investigated. Measurements of spectra of scattered neutrons on carbon-12 at the angles 30, 45, 60, 90, 120, 150 degrees are made. Differential cross sections of elastic scattering are obtained

Elastic and inelastic neutron scattering studies on 3d and 4f magnetic compounds

International Nuclear Information System (INIS)

Erkelens, W.A.C.

1987-01-01

First, some theoretical aspects of neutron scattering techniques are given, and the cyrogenic equipment and the neutron spectrometers employed are described. Experiments on a 3-d Ising system are described, performed at very low temperatures and in a magnetic field. Experimental proof has been obtained for the theoretical prediction that the critical behaviour of a d-dimensional Ising system in a transverse magnetic field near T=0 is identical to that of a d+1 dimensional Ising system as a function of temperature in zero field. Experiments are described on a Ni 2+ compound which represents a good example of a 1-d antiferromagnetic Heisenberg (HAF), spin s=1, system. The results give evidence for the so called 'Haldane conjecture', a theory which predicts that the ground state of HAF systems with integer spin is a nonmagnetic many-body singlet. The excited states are separated from the ground state by an energy gap. Contrastingly, half-integer spin systems are predicted to have no such gap. A short introduction is given to phenomena in rare earth, 4f compunds, like the Kondo effect and heavy fermion behaviour. Experimental results on the RE hexaborides are reported, among which CeB 6 , a typical Kondo system with complex magnetic orderings. Furthermore, inelastic neutron scattering experiments on NdB 6 and CeB 6 , performed in order to get insight in the various reaction mechanisms, are presented. Finally a report is given on magnetic correlations and excitations in two nonmagnetically ordered heavy fermion compounds, CeCu 6 and CeRu 2 Si 2 and their interpretation in the light of existing theories. 201 refs.; 61 figs.; 4 tabs

Insertion/deletion polymorphism of ACE gene in females with peripartum cardiomyopathy: A case-control study.

Science.gov (United States)

Yaqoob, Irfan; Tramboo, Nisar A; Bhat, Irfan A; Pandith, Arshad; Beig, Jahangir R; Hafeez, Imran; Lone, Aijaz A; Shah, Tariq R; Samreen, Sumera

The role of polymorphism of Angiotensin converting enzyme (ACE) gene and ACE activity in etiopathogenesis, prognosis, and many other clinical parameters in the various form of the cardiovascular disease has been established to some degree of certainty. The pathophysiology of Peripartum cardiomyopathy (PPCM) remains an area of active research. The main aim of our study was to see pattern of ACE- Insertion/Deletion (I/D) allele in PPCM and its implications on left ventricular performance indices. This single-center case-control study included 45 cases and 70 controls. The diagnosis of PPCM was established clinically and echocardiographically. ACE genotyping was done by polymerase chain reaction (PCR) method in all subjects. The II, ID, and DD genotype was present in 16, 18 and 11 of subjects with PPCM and 48, 19 and 3 of controls respectively. The odds ratio for ACE-II genotype in cases vs. controls was 0.253 (95% CI=0.114-0.558; p=0.007), for that of II genotype was 1.93 (95% CI=0.86-4.3; p=0.107) and for DD genotype was 7.225 (95% CI; 1.88-27.6; p=0.0039). Overall frequency of D allele in cases was significantly higher than controls (odds=4.25; 95% CI=2.01-6.7; p=0.0001). Moreover, ejection fraction, left ventricular volume and linear dimensions were worse in patients with DD genotype. ACE DD genotype and overall frequency of D allele is significantly higher in patients with PPCM. Also, the presence of DD genotype is associated with worse systolic performance indices measured echocardiographically. Copyright © 2017. Published by Elsevier B.V.

TRACE/VALKIN: a neutronics-thermohydraulics coupled code to analyze strong 3D transients

Energy Technology Data Exchange (ETDEWEB)

Rafael Miro; Gumersindo Verdu; Ana Maria Sanchez [Chemical and Nuclear Engineering Department. Polytechnic University of Valencia. Cami de Vera s/n. 46022 Valencia (Spain); Damian Ginestar [Applied Mathematics Department. Polytechnic University of Valencia. Cami de Vera s/n. 46022 Valencia (Spain)

2005-07-01

Full text of publication follows: A nuclear reactor simulator consists mainly of two different blocks, which solve the models used for the basic physical phenomena taking place in the reactor. In this way, there is a neutronic module which simulates the neutron balance in the reactor core, and a thermal-hydraulics module, which simulates the heat transfer in the fuel, the heat transfer from the fuel to the water, and the different condensation and evaporation processes taking place in the reactor core and in the condenser systems. TRACE is a two-phase, two-fluid thermal-hydraulic reactor systems analysis code. The TRACE acronym stands for TRAC/RELAP Advanced Computational Engine, reflecting its ability to run both RELAP5 and TRAC legacy input models. It includes a three-dimensional kinetics module called PARCS for performing advanced analysis of coupled core thermal-hydraulic/kinetics problems. TRACE-VALKIN code is a new time domain analysis code to study transients in LWR reactors. This code uses the best estimate code TRACE to give account of the heat transfer and thermal-hydraulic processes, and a 3D neutronics module. This module has two options, the MODKIN option that makes use of a modal method based on the assumption that the neutronic flux can be approximately expanded in terms of the dominant lambda modes associated with a static configuration of the reactor core, and the NOKIN option that uses a one-step backward discretization of the neutron diffusion equation. The lambda modes are obtained using the Implicit Restarted Arnoldi approach or the Jacob-Davidson algorithm. To check the performance of the coupled code TRACE-VALKIN against complex 3D neutronic transients, using the cross-sections tables generated with the translator SIMTAB from SIMULATE to TRACE/VALKIN, the Cofrentes NPP SCRAM-61 transient is simulated. Cofrentes NPP is a General Electric BWR-6 design located in Valencia-land (Spain). It is in operation since 1985 and currently in its fifteenth

Neutronics Design of Helical Type DEMO Reactor FFHR-d1

Energy Technology Data Exchange (ETDEWEB)

Tanaka, T.; Sagara, A.; Goto, T.; Yanagi, N.; Masuzaki, S.; Tamura, H.; Miyazawa, J.; Muroga, T., E-mail: teru@nifs.ac.jp [National Institute for Fusion Science, Toki (Japan)

2012-09-15

Full text: Neutronics design study has been performed in a newly started conceptual design activity for a helical type DEMO reactor FFHR-d1. Features of the FFHR-d1 design are enlargement of the basic configurations of reactor components and extrapolation of plasma parameters from those of the helical type plasma experimental machine Large Helical Device (LHD) to achieve the highest feasibility. From the neutronics point of view, a blanket space of FFHR-d1 is severely limited at the inboard of the torus. This is due to the core plasma position shifting to the inboard side under the confinement condition extrapolated from LHD. The first step of the neutronics investigation using the MCNP code has been performed with a simple torus model simulating thin inboard blanket space. A Flibe+Be/Ferritic steel breeding blanket showed preferable performances for both tritium breeding and shielding, and has been adapted as a reference blanket system for FFHR-d1. The investigations indicate that a combination of a 15 cm thick breeding blanket, 55 cm thick WC+B4C shield, i.e., the blanket space of 70 cm, could suppress the fast neutron flux and nuclear heating in the helical coils to the design targets for the neutron wall loading of 1.5 MW/m{sup 2}. Since the outboard side can provide a large space for a 60 cm thick breeding blanket, a fully-covered tritium breeding ratio (TBR) of 1.31 has been obtained in the simple torus model. The neutronics design study has proceeded to the second step using a 3-D helical reactor model. The most important issue in the 3-D neutronics design is a compatibility with the helical divertor design. To achieve a higher TBR and shielding performance, the core plasma has to be covered by the breeding blanket layers as possible. However, the dimensions of the blanket layers are limited by magnetic field lines connecting an edge of the core plasma and divertor pumping ports. After repeating modification of the blanket configuration, the global TBR of 1

Non-destructive assay employing 2D and 3D digital radiographic imaging acquired with thermal neutrons and reactor-produced radioisotopes

International Nuclear Information System (INIS)

Silvani, Maria Ines; Almeida, Gevaldo Lisboa de; Lopes, Ricardo T.

2011-01-01

The inner structure of some objects can only be visualized by using suitable techniques, when safety reasons or expensive costs preclude the application of invasive procedures. The kind of agent rendering an object partially transparent, unveiling thus its features, depends upon the object size and composition. As a rough rule of thumb, light materials are transparent to gamma and X-rays while the heavy ones are transparent to neutrons. When, after traversing an object, they hit a proper 2-D detector, a radiograph is produced representing a convoluted cross section, called projection, of that object. Taking a large number of such projections for different object attitudes, it is possible to obtain a 3-D tomography of the object as a map of attenuation coefficients. This procedure however, besides a time-consuming task, requires specially tailored equipment and software, not always available or affordable. Yet, in some circumstances it is feasible to replace the 3-D tomography by a stereoscopy, allowing one to visualize the spatial configuration of the object under analysis. In this work, 2-D and 3-D radiographic images have been acquired using thermal neutrons and reactor-produced radioisotopes and proper imaging plates as detectors. The stereographic vision has been achieved by taking two radiographs of the same object at different angles, from the detector point of view. After a treatment to render them red-white and green-white they were properly merged to yield a single image capable to be watched with red-green glasses. All the image treatment and rendering has been performed with the software ImageJ. (author)

ACE serum level and I/D gene polymorphism in children with obstructive uropathies and other congenital anomalies of the kidney and urinary tract.

Science.gov (United States)

Kostadinova, Emilya Stambolova; Miteva, Lyuba Dineva; Stanilova, Spaska Angelova

2017-08-01

The aim of this study was to investigate the association of an insertion/deletion (I/D) polymorphism in angiotensin-converting enzyme (ACE) gene with serum ACE level in relation to the type and severity of malformations from congenital anomalies of the kidney and urinary tract (CAKUT) spectrum. A group of 134 Bulgarian children with CAKUT divided into four subgroups according to the leading malformation and 109 controls were genotyped by classical polymerase chain reaction. The quantitative determination of serum ACE was performed by ELISA method. A significant elevation of DD-genotype was observed in high-grade hydronephrosis compared to low-grade (43% vs. 9%). The carrying of DD-genotype was associated with higher risk for severe hydronephrosis with OR = 7.5 (95% CI: 1.242÷45.278; P = 0.028). Also, elevated serum ACE concentrations in patients with high-grade compared to low-grade hydronephrosis (237.4 ± 45 ng/mL vs 180.5 ± 64 ng/mL; P = 0.0065) were found. ACE level was significantly lower in patients with unilateral renal agenesis; hypo/dysplasia and multicystic dysplastic kidney (156.6 ± 54 ng/mL) than controls (200.6 ± 56.7 ng/mL; P = 0.005) and the remaining CAKUT subgroups. The DD genotype of I/D ACE polymorphism encodes the highest serum ACE level may be an additional genetic risk factor contributing to the severe hydronephrosis in Bulgarian patients with obstructive uropathies in contrast to other investigated categories of CAKUT malformations. © 2016 Asian Pacific Society of Nephrology.

High-pressure 3He gas scintillation neutron spectrometer

International Nuclear Information System (INIS)

Derzon, M.S.; Slaughter, D.R.; Prussin, S.G.

1985-10-01

A high-pressure, 3 He-Xe gas scintillation spectrometer has been developed for neutron spectroscopy on D-D fusion plasmas. The spectrometer exhibits an energy resolution of (121 +- 20 keV) keV (FWHM) at 2.5 MeV and an efficiency of (1.9 +- 0.4) x 10 -3 (n/cm 2 ) -1 . The contribution to the resolution (FWHM) from counting statistics is only (22 +- 3 keV) and the remainder is due predominantly to the variation of light collection efficiency with location of neutron events within the active volume of the detector

High-dynamic-range neutron time-of-flight detector used to infer the D(t,n){sup 4}He and D(d,n){sup 3}He reaction yield and ion temperature on OMEGA

Energy Technology Data Exchange (ETDEWEB)

Forrest, C. J., E-mail: cforrest@lle.rochester.edu; Glebov, V. Yu.; Goncharov, V. N.; Knauer, J. P.; Radha, P. B.; Regan, S. P.; Romanofsky, M. H.; Sangster, T. C.; Shoup, M. J.; Stoeckl, C. [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623-1299 (United States)

2016-11-15

Upgraded microchannel-plate–based photomultiplier tubes (MCP-PMT’s) with increased stability to signal-shape linearity have been implemented on the 13.4-m neutron time-of-flight (nTOF) detector at the Omega Laser Facility. This diagnostic uses oxygenated xylene doped with diphenyloxazole C{sub 15}H{sub 11}NO + p-bis-(o-methylstyryl)-benzene (PPO + bis-MSB) wavelength shifting dyes and is coupled through four viewing ports to fast-gating MCP-PMT’s, each with a different gain to allow one to measure the light output over a dynamic range of 1 × 10{sup 6}. With these enhancements, the 13.4-m nTOF can measure the D(t,n){sup 4}He and D(d,n){sup 3}He reaction yields and average ion temperatures in a single line of sight. Once calibrated for absolute neutron sensitivity, the nTOF detectors can be used to measure the neutron yield from 1 × 10{sup 9} to 1 × 10{sup 14} and the ion temperature with an accuracy approaching 5% for both the D(t,n){sup 4}He and D(d,n){sup 3}He reactions.

Investigating phase behavior and structural changes in NiO/Ni-YSZ composite with monochromatic in-situ 2D and static 3D neutron imaging

DEFF Research Database (Denmark)

Makowska, Malgorzata G.; Strobl, Markus; Kardjilov, Nikolay

2017-01-01

oxide fuel cells, and for cathodes in solid oxide electrolysis cells). Results of in-situ 2D and ex-situ 3D measurements are presented. In-situ observation of phase transition between NiO and Ni were performed at the test Beamline for neutron Optics and other Applications (BOA) at the continuous neutron...... and post mortem tomography provides complementary information about the reduction/oxidation degree and e.g. crack evolution in the investigated system and it is therefore possible to acquire information about the rate of chemical reactions and spatial evolution of phases and morphological features....

Evaluation of cartilage surface injuries using 3D-double echo steady state (3D-DESS): Effect of changing flip angle from 40 deg to 90 deg

International Nuclear Information System (INIS)

Moriya, Susumu; Yokobayashi, Tsuneo; Ishikawa, Mitsunori; Miki, Yukio; Kanagaki, Mitsunori; Yamamoto, Akira; Okudaira, Shuzo; Nakamura, Shinichiro

2011-01-01

Background. In magnetic resonance imaging (MRI) with 3D-double-echo steady-state (3D-DESS) sequences, the cartilage-synovial fluid contrast is reported to be better with a flip angle of 90 deg than with the conventional flip angle of 40 deg, and the detection rate of knee cartilage injury may be improved. Purpose. To compare the diagnostic performance and certainty of diagnosis with 3D-DESS images made using two flip angle settings, 40 deg and 90 deg, for knee cartilage surface lesions of Grade 2 or above confirmed by arthroscopy. Material and Methods. Images were obtained with 3D-DESS flip angles of 40 deg and 90 deg at 1.0T in 13 consecutive patients (2 men, 11 women, age range 18-68 years) evaluated for superficial cartilage injury by arthroscopy. Two radiologists classified the presence or absence of cartilage damage of ≥Grade 2 as 'positive (p)' or 'negative (n)', respectively. The rate of agreement with arthroscopic diagnosis was then examined, and the diagnostic performance compared. Diagnostic confidence was assessed scoring the presence or absence of cartilage damage into three categories: 3 = can diagnose with absolute confidence; 2 = can diagnose with a level of certainty as probably present or probably absent; and 1 = cannot make a diagnosis. Results. In a comparison of the rate of agreement between diagnosis by 3D-DESS images and arthroscopy, the rate of agreement was significantly higher and diagnostic performance was better in 90 deg images for the medial femoral condyle only. Diagnostic confidence was significantly better with 90 deg flip angle images than with 40 deg flip angle images for all six cartilage surfaces. Conclusion. In evaluating knee cartilage surface lesions with 3D-DESS sequences, a flip angle setting of 90 deg is more effective than the conventional setting of 40 deg

Evaluation of cartilage surface injuries using 3D-double echo steady state (3D-DESS): Effect of changing flip angle from 40 deg to 90 deg

Energy Technology Data Exchange (ETDEWEB)

Moriya, Susumu; Yokobayashi, Tsuneo; Ishikawa, Mitsunori (Ishikawa Clinic, Kyoto (Japan)), email: smoyari@yahoo.co.jp; Miki, Yukio (Dept. of Radiology, Osaka City Univ. Graduate School of Medicine, Osaka (Japan)); Kanagaki, Mitsunori; Yamamoto, Akira (Dept. of Diagnostic Imaging and Nuclear Medicine, Kyoto Univ., Kyoto (Japan)); Okudaira, Shuzo (Dept. of Orthopaedics, Kyoto Police Hospital, Kyoto (Japan)); Nakamura, Shinichiro (Center for Musculoskeletal Research, Univ. of Tennessee, Knoxville, TN (United States))

2011-12-15

Background. In magnetic resonance imaging (MRI) with 3D-double-echo steady-state (3D-DESS) sequences, the cartilage-synovial fluid contrast is reported to be better with a flip angle of 90 deg than with the conventional flip angle of 40 deg, and the detection rate of knee cartilage injury may be improved. Purpose. To compare the diagnostic performance and certainty of diagnosis with 3D-DESS images made using two flip angle settings, 40 deg and 90 deg, for knee cartilage surface lesions of Grade 2 or above confirmed by arthroscopy. Material and Methods. Images were obtained with 3D-DESS flip angles of 40 deg and 90 deg at 1.0T in 13 consecutive patients (2 men, 11 women, age range 18-68 years) evaluated for superficial cartilage injury by arthroscopy. Two radiologists classified the presence or absence of cartilage damage of >=Grade 2 as 'positive (p)' or 'negative (n)', respectively. The rate of agreement with arthroscopic diagnosis was then examined, and the diagnostic performance compared. Diagnostic confidence was assessed scoring the presence or absence of cartilage damage into three categories: 3 = can diagnose with absolute confidence; 2 = can diagnose with a level of certainty as probably present or probably absent; and 1 = cannot make a diagnosis. Results. In a comparison of the rate of agreement between diagnosis by 3D-DESS images and arthroscopy, the rate of agreement was significantly higher and diagnostic performance was better in 90 deg images for the medial femoral condyle only. Diagnostic confidence was significantly better with 90 deg flip angle images than with 40 deg flip angle images for all six cartilage surfaces. Conclusion. In evaluating knee cartilage surface lesions with 3D-DESS sequences, a flip angle setting of 90 deg is more effective than the conventional setting of 40 deg

Time-dependent anisotropic distributed source capability in transient 3-d transport code tort-TD

International Nuclear Information System (INIS)

Seubert, A.; Pautz, A.; Becker, M.; Dagan, R.

2009-01-01

The transient 3-D discrete ordinates transport code TORT-TD has been extended to account for time-dependent anisotropic distributed external sources. The extension aims at the simulation of the pulsed neutron source in the YALINA-Thermal subcritical assembly. Since feedback effects are not relevant in this zero-power configuration, this offers a unique opportunity to validate the time-dependent neutron kinetics of TORT-TD with experimental data. The extensions made in TORT-TD to incorporate a time-dependent anisotropic external source are described. The steady state of the YALINA-Thermal assembly and its response to an artificial square-wave source pulse sequence have been analysed with TORT-TD using pin-wise homogenised cross sections in 18 prompt energy groups with P 1 scattering order and 8 delayed neutron groups. The results demonstrate the applicability of TORT-TD to subcritical problems with a time-dependent external source. (authors)

Is the association between ACE genes and blood pressure mediated by postnatal growth during the first 3 years?

Science.gov (United States)

Min, JungWon; Kim, Young Ju; Lee, Hwayoung; Park, Eun Ae; Cho, Su Jin; Hong, Young Mi; Oh, Se-Young; Ha, Eunhee; Kang, DukHee; Park, Hyesook

2012-06-01

Unlike the defined role of angiotensin-converting enzyme (ACE) gene in adult hypertension, ACE gene did not show direct influence on childhood blood pressure (BP), rather, seemed to be related to childhood growth with age-dependent characteristics. Thus, we examined intermediate effects of postnatal growth between the ACE polymorphisms and BP. We analyzed data from 257 children born in 2001-04 at Ewha Womans University Hospital in Seoul, Korea, and followed them up until 3 years of age. Children with excessive adiposity had higher BP, as rapid growers did to no-change and decelerated growers. The ACE II genotype was associated with greater growth acceleration than the DD genotype (II: 46.8% vs. DD: 23.9%), and with a higher BP. The interactions between ACE genotype and adiposity at age 3 were significant on the BP levels. The highest BP increase with the same degree of adiposity was observed in those with the II genotype [β (SE) for BMI: 1.9 (0.9), p=0.04]; particularly, only rapid grown II carriers demonstrated statistical significance on this linear association. These results suggested that ACE polymorphisms and BP association are mediated by postnatal growth. Further studies are required to determine the age-specific ACE genetic effects and its undefined biological mechanism. Copyright © 2011 Elsevier Ltd. All rights reserved.

Total cross-section measurements on aluminium, carbon, fluorine and hydrogen for d, d reaction neutrons using the coincidence method (1963); Mesure de la section efficace totale de l'aluminium, du carbone, du fluor et de l'hydrogene pour des neutrons de la reaction d, d par la methode des coincidences (1963)

Energy Technology Data Exchange (ETDEWEB)

Ambrosino, G; Sorriaux, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

The experiment described consists in the measurement of the total cross-section of various materials: aluminium, carbon, fluorine and hydrogen, for mono-energetic 2.77 MeV neutrons obtained from the d,d reaction. The measurement is carried out by transmission. The neutrons are detected by means of a plastic scintillator mounted on a 56 AVP photomultiplier, and are isolated from all secondary phenomena (background noise, scattered neutrons) by coincidence with helium 3. which particles are associated to the neutrons from the reaction {sup 2}{sub 1}D ({sup 2}{sub 1}D, n) {sup 3}{sub 2}H The helium 3 particles are detected by a PN junction diode used with inverted polarisation. An absorption exponential has been traced out using measurements made on seven aluminium bars. The accuracy of the total cross-section measurements is about 10{sup -2}. (authors) [French] L'experience exposee dans ce rapport consiste en la mesure des sections efficaces totales de differents materiaux: aluminium, carbone, fluor et hydrogene, pour des neutrons monoenergetiques de 2,77 MeV, obtenus par la reaction d,d. La mesure est faite par transmission. Les neutrons sont detectes par un scintillateur plastique monte sur un photomultiplicateur 56 AVP, et sont separes de tout phenomene secondaire (bruit de fond, neutrons diffuses) par coincidence avec les helium 3, particules associees aux neutrons de la reaction {sup 2}{sub 1}D ({sup 2}{sub 1}D, n) {sup 3}{sub 2}H Les helium 3 sont detectes par une diode a jonction PN utilisee en polarisation inverse. Une exponentielle d'absorption a ete tracee a partir de mesures faites sur sept barreaux d'aluminium. La precision des mesures des sections efficaces totales est de l'ordre de 10{sup -2}. (auteurs)

Role of Renin-Angiotensin-converting Enzyme Level and ACE Gene Polymorphism in Patients with Nonalcoholic Fatty Liver Disease.

Science.gov (United States)

Tekatas, Demet D; Bahcecioglu, Ibrahim H; Ispiroglu, Murat; Sahin, Abdurrahman; Ilhan, Necip; Yalniz, Mehmet; Demirel, Ulvi

2016-01-01

In this study, we aimed to investigate the histological and clinical effect of angiotensin-converting enzyme (ACE) and ACE gene polymorphism in nonalcoholic fatty liver disease (NAFLD) and their roles in the progression of the disease. Liver function tests, body mass index, waist circumference, lipid parameters, fasting blood glucose (FBG), hemoglobin A1c (HbA1c), homeostasis model assessment-IR (HOMA-IR), ACE, and ACE gene polymorphism were evaluated in the NAFLD group and control group. The study group was evaluated by dividing the group into four subgroups by ACE gene polymorphism (D/D homozygous, I/I homozygous, D/I heterozygous, I/D heterozygous). Liver biopsies were evaluated according to Brunt Classification. A total of 31 patients who were diagnosed with NAFLD and 40 healthy individuals were included in the study. The ACE level was found to be 11.69 ± 1.99 in the NAFLD group and 11.52 ± 1.72 in the control group (p = 0.70). There was a negative correlation between ACE levels and HOMA-IR levels (p = 0.008, r= -0.512). Biochemical parameters were not different among ACE gene polimorphism subgroups, except FBG (between D/D, I/D and D/I, I/D; p = 0.02). When the ACE levels were compared in terms of grade and stage, no significant difference was found (for stage and grade p = 0.68). The ACE gene polymorphism subgroups did not differ by histopathologic findings; grade and stage (for grade p = 0.42, for stage p = 0.92). In this study, we could not find a correlation of ACE and ACE gene polymorphism with metabolic risk factors and the disease severity in NAFLD. Tekatas DD, Bahcecioglu IH, Ispiroglu M, Sahin A, Ilhan N, Yalniz M, Demirel U. Role of Renin-Angiotensin-converting Enzyme Level and ACE Gene Polymorphism in Patients with Nonalcoholic Fatty Liver Disease. Euroasian J Hepato-Gastroenterol 2016;6(2):137-142.

Steady state technologies for tokamak based fusion neutron sources and hybrids

International Nuclear Information System (INIS)

Azizov, E.A.; Kuteev, B.V.

2015-01-01

Full text of publication follows. The development of demonstration fusion neutron sources for fusion nuclear science activity and hybrid applications has reached the stage of conceptual design on the basis of tokamak device in Russia. The conceptual design of FNS-ST has been completed in details (plasma current 1.5 MA, magnetic field 1.5 T, major radius 0.5 m, aspect ratio 1.67 and auxiliary heating power up to 15 MW) [1, 2]. A comparison of physical plasma parameters and economics for FNS-ST and a conventional tokamak FNS-CT (plasma current 1.5 MA, magnetic field 6.7 T, major radius 2.25 m, aspect ratio 3 and auxiliary heating power up to 30 MW) has been fulfilled [3]. This study suggested the feasibility to reach 1-20 MW of fusion power using these magnetic configuration options. Nevertheless, the efficiency of neutron production Q remains comparable for both due to the beam fusion input. The total ST-economics for the full project including operation and utilization costs is by a factor of 2 better than of CT. Zero [4] and one-dimensional [5] models have been developed and used in this system analysis. The characteristics of plasma confinement, stability and current drive in operation have been confirmed by numerous benchmarking simulations of modern experiments. Scenarios allowing us to reach and maintain steady state operation have been considered and optimized. The results of these studies will be presented. Prospective technical solutions for SSO-technology systems have been evaluated, and the choice of enabling technologies and materials of the basic FNS options has been made. A conceptual design of a thin-wall water cooled vacuum chamber for heat loadings up to 1.5 MW/m 2 has been fulfilled. The chamber consists of 2 mm Be tiles, pre-shaped CuCrZr 1 mm shell and 1 mm of stainless steel shell as a structural material. A concept of double-null divertor for FNS-ST has been offered that is capable to withstand heat fluxes up to 6 MW/m 2 . Lithium dust

Neutron emission from impacted solid LiD samples

International Nuclear Information System (INIS)

Kaushik, T.C.; Shyam, A.; Kulkarni, L.V.; Srinivasan, M.

1993-01-01

Nylon projectiles with 0.1 g to 0.3 g mass, accelerated to velocities of 0.2-1 km/s using a 60 cm long electromagnetic accelerator (railgun), have been impacted upon solid lithium deuteride (LiD) samples of 3 proportional counters. The output from the BF 3 set-up is monitored in several ways to characterize the possible neutron emission from the target. This includes a simple technique of counting the single channel analyser (SCA) output through a dead-time unit to identify bursts of < 100 μs duration. Counting is started after a delay of ∼ 1 ms to avoid the initial interference from the capacitor bank discharge. The signal is also recorded in a storage oscilloscope from the start of projectile acceleration along with a time marker just before the impact. From a number of shots taken with and without the samples, a significant evidence of neutron emission from the LiD samples appears to emerge. The experiments suggest that approximately 100 neutrons might be generated during every such impact in a duration of < 4 ms. (author). 7 refs., 3 figs

A case control association study of ACE gene polymorphism (I/D) with hypertension in Punjabi population from Faisalabad, Pakistan.

Science.gov (United States)

Hussain, Misbah; Awan, Fazli Rabbi; Gujjar, Amna; Hafeez, Shakir; Islam, Mehboob

2018-01-01

Angiotensin converting enzyme (ACE) is a key component of renin angiotensin aldosterone system. It converts angiotensin I to angiotensin II. Insertion/deletion (I/D) polymorphism of ACE gene is found associated with several complications. However, its association with hypertension and related metabolic diseases is still controversial. So, the aim of the present study was to check this association for Punjabi population from Faisalabad, Pakistan. For this purpose, blood samples (patients = 100, controls = 48) were collected and several biochemical parameters were measured. Genotyping for ACE (I/D) polymorphism was performed by polymerase chain reaction (PCR) assay. ID genotype is found prevalent in the studied population as 41% in control subjects and 61% in patients. Furthermore, chi-square analysis showed significant (p = 0.005) difference for genotypic frequencies between both groups. One-way ANOVA for association of II, ID, and DD genotypes with anthropometric, clinical, and biochemical parameters showed that in patient group, DD genotype is significantly (p = 0.041) associated with systolic blood pressure (SBP). Moreover, ID genotype is found associated with the presence of cardiovascular diseases. This study concludes that DD genotype is strongly associated with higher SBP in hypertensive patients.

The ACE gene and human performance: 12 years on.

Science.gov (United States)

Puthucheary, Zudin; Skipworth, James R A; Rawal, Jai; Loosemore, Mike; Van Someren, Ken; Montgomery, Hugh E

2011-06-01

Some 12 years ago, a polymorphism of the angiotensin I-converting enzyme (ACE) gene became the first genetic element shown to impact substantially on human physical performance. The renin-angiotensin system (RAS) exists not just as an endocrine regulator, but also within local tissue and cells, where it serves a variety of functions. Functional genetic polymorphic variants have been identified for most components of RAS, of which the best known and studied is a polymorphism of the ACE gene. The ACE insertion/deletion (I/D) polymorphism has been associated with improvements in performance and exercise duration in a variety of populations. The I allele has been consistently demonstrated to be associated with endurance-orientated events, notably, in triathlons. Meanwhile, the D allele is associated with strength- and power-orientated performance, and has been found in significant excess among elite swimmers. Exceptions to these associations do exist, and are discussed. In theory, associations with ACE genotype may be due to functional variants in nearby loci, and/or related genetic polymorphism such as the angiotensin receptor, growth hormone and bradykinin genes. Studies of growth hormone gene variants have not shown significant associations with performance in studies involving both triathletes and military recruits. The angiotensin type-1 receptor has two functional polymorphisms that have not been shown to be associated with performance, although studies of hypoxic ascent have yielded conflicting results. ACE genotype influences bradykinin levels, and a common gene variant in the bradykinin 2 receptor exists. The high kinin activity haplotye has been associated with increased endurance performance at an Olympic level, and similar results of metabolic efficiency have been demonstrated in triathletes. Whilst the ACE genotype is associated with overall performance ability, at a single organ level, the ACE genotype and related polymorphism have significant

Retracted: Association of ACE I/D gene polymorphism with T2DN susceptibility and the risk of T2DM developing into T2DN in a Caucasian population.

Science.gov (United States)

Liu, Guohui; Zhou, Tian-Biao; Jiang, Zongpei; Zheng, Dongwen

2015-03-01

The association of the angiotensin-converting enzyme (ACE) insertion/deletion (I/D) gene polymorphism with type-2 diabetic nephropathy (T2DN) susceptibility and the risk of type-2 diabetes mellitus (T2DM) developing into T2DN in Caucasian populations is still controversial. A meta-analysis was performed to evaluate the association of ACE I/D gene polymorphism with T2DN susceptibility and the risk of T2DM developing into T2DN in Caucasian populations. A predefined literature search and selection of eligible relevant studies were performed to collect data from electronic databases. Sixteen articles were identified for the analysis of the association of ACE I/D gene polymorphism with T2DN susceptibility and the risk of T2DM developing into T2DN in Caucasian populations. ACE I/D gene polymorphism was not associated with T2DN susceptibility and the risk of patients with T2DM developing T2DN in Caucasian populations. Sensitivity analysis according to sample size of case (ACE I/D gene polymorphism was not associated with T2DN susceptibility and the risk of patients with T2DM developing T2DN in Caucasian populations. However, more studies should be performed in the future. © The Author(s) 2014.

Association between ACE gene I/D polymorphism and clinical presentation and prognosis of sarcoidosis.

Science.gov (United States)

Alía, P; Mañá, J; Capdevila, O; Alvarez, A; Navarro, M A

2005-01-01

Serum angiotensin converting enzyme (SACE) concentration is considered a marker of sarcoidosis activity. This concentration is influenced by an insertion/deletion (I/D) polymorphism of the ACE gene, such that SACE levels follow the pattern DD>ID>II. The aim of our work was to study the relationship between I/D polymorphism and susceptibility to sarcoidosis, as well as the relation between this polymorphism and the clinical presentation and evolution of the disease in 177 sarcoidosis patients. A group of 104 individuals without sarcoidosis was included as control. Genotyping was done by a polymerase chain reaction (PCR) method, and SACE concentration at diagnosis was determined by a kinetic method. No differences were observed in genotype or allele distributions between patients and controls, nor between patients considering the type of presentation (Löfgren versus non-Löfgren) and evolution of the disease (acute versus chronic). As reported for healthy populations, SACE concentrations followed the pattern DD>ID>II in sarcoidosis patients, but significant differences between genotypes existed only in the Löfgren group (p = 0.003) and in acute patients (p = 0.02). SACE concentrations at diagnosis were lower in acute patients (p = 0.05) and in Löfgren's syndrome (p = 0.04), but this seemed to occur only in ID individuals (p = 0.02 and p = 0.01, respectively). No relation was thus found between I/D polymorphism and susceptibility to sarcoidosis, but ACE I/D genotyping may improve the assessment of disease activity, both at diagnosis and during the follow-up of treated and untreated patients.

Progress on advanced tokamak and steady-state scenario development on DIII-D and NSTX

Energy Technology Data Exchange (ETDEWEB)

Doyle, E J [Department of Electrical Engineering and PSTI, University of California, Los Angeles, California 90095 (United States); Garofalo, A M [Columbia University, New York, New York 10027 (United States); Greenfield, C M [General Atomics, San Diego, California 92186-5608 (United States); Kaye, S M [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543-0451 (United States); Menard, J E [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543-0451 (United States); Murakami, M [Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 (United States); Sabbagh, S A [Columbia University, New York, New York 10027 (United States); Austin, M E [University of Texas-Austin, Austin, Texas 78712 (United States); Bell, R E [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543-0451 (United States); Burrell, K H [General Atomics, San Diego, California 92186-5608 (United States); Ferron, J R [General Atomics, San Diego, California 92186-5608 (United States); Gates, D A [Princeton Plasma Physics Lab., Princeton, New Jersey 08543-0451 (United States); Groebner, R J; Hyatt, A W; Luce, T C; Petty, C C; Wade, M R; Waltz, R E [General Atomics, San Diego, California 92186-5608 (United States); Jayakumar, R J [Lawrence Livermore National Lab., Livermore, California 94550 (United States); Kinsey, J E [Lehigh Univ., Bethlehem, Pennsylvania 18015 (United States); LeBlanc, B P [Princeton Plasma Physics Lab., Princeton, New Jersey 08543-0451 (United States); McKee, G R [Univ. of Wisconsin-Madison, Madison, Wisconsin 53706 (United States); Okabayashi, M [Princeton Plasma Physics Lab., Princeton, New Jersey 08543-0451 (United States); Peng, Y-K M [Oak Ridge National Lab., Oak Ridge, Tennessee 37831 (United States); Politzer, P A [General Atomics, San Diego, California 92186-5608 (United States); Rhodes, T L [Dept. of Electrical Engineering and PSTI, Univ. of California, Los Angeles, California 90095 (United States)

2006-12-15

Advanced tokamak (AT) research seeks to develop steady-state operating scenarios for ITER and other future devices from a demonstrated scientific basis. Normalized target parameters for steady-state operation on ITER are 100% non-inductive current operation with a bootstrap current fraction f{sub BS} {>=} 60%, q{sub 95} {approx} 4-5 and G {identical_to}{beta}{sub N}H{sub scaling}/q{sub 95}{sup 2} {>=}0.3. Progress in realizing such plasmas is considered in terms of the development of plasma control capabilities and scientific understanding, leading to improved AT performance. NSTX has demonstrated active resistive wall mode stabilization with low, ITER-relevant, rotation rates below the critical value required for passive stabilization. On DIII-D, experimental observations and GYRO simulations indicate that ion internal transport barrier (ITB) formation at rational-q surfaces is due to equilibrium zonal flows generating high local E ? B shear levels. In addition, stability modelling for DIII-D indicates a path to operation at {beta}{sub N} {>=} 4 with q{sub min} {>=} 2, using broad, hollow current profiles to increase the ideal wall stability limit. Both NSTX and DIII-D have optimized plasma performance and expanded AT operational limits. NSTX now has long-pulse, high performance discharges meeting the normalized targets for an spherical torus-based component test facility. DIII-D has developed sustained discharges combining high beta and ITBs, with performance approaching levels required for AT reactor concepts, e.g. {beta}{sub N} = 4, H{sub 89} = 2.5, with f{sub BS} > 60%. Most importantly, DIII-D has developed ITER steady-state demonstration discharges, simultaneously meeting the targets for steady-state Q {>=} 5 operation on ITER set out above, substantially increasing confidence in ITER meeting its steady-state performance objective.

S3C: EBT Steady-State Shooting code description and user's guide

International Nuclear Information System (INIS)

Downum, W.B.

1983-09-01

The Oak Ridge National Laboratory (ORNL) one-dimensional (1-D) Steady-State Shooting code (S3C) for ELMO Bumpy Torus (EBT) plasmas is described. Benchmark calculations finding the steady-state density and electron and ion temperature profiles for a known neutral density profile and known external energy sources are carried out. Good agreement is obtained with results from the ORNL Radially Resolved Time Dependent 1-D Transport code for an EBT-Q type reactor. The program logic is described, along with the physics models in each code block and the variable names used. Sample input and output files are listed, along with the main code

Analysis of OKTAVIAN Shielding Benchmark Experiments by ENDF/B-VII, JEFF-3.1, and JENDL-3.3

International Nuclear Information System (INIS)

Kim, Do-Heon; Gil, Choong-Sup; Lee, Young-Ouk

2007-01-01

International collaborations for the ITER Project and other fusion-related development projects have been conducted to create a reference fusion nuclear data library such as FENDL, which was a collection of the best cross section data from national nuclear data libraries. Recent release of newly evaluated nuclear data libraries requires an extensive and intensive benchmarking of the updated transport libraries to become a candidate for the future collection. In this study, the pulsed sphere experiments for leakage neutron and gamma-ray spectra at the D-T neutron source facility of Osaka University, OKTAVIAN were employed to test the ENDF/B-VII beta 1, JEFF-3.1, and JENDL-3.3 libraries. The continuous energy Monte Carlo transport code MCNPX-2.5 was used along with the ACE format libraries processed by a modified version of the NJOY99.90 code

3-D numerical modelling of flow around a groin

DEFF Research Database (Denmark)

Miller, R.; Roulund, A.; Sumer, B. Mutlu

2003-01-01

A 3-D flow code, EllipSys3D, has been implemented to simulate the 3-D flow around a groin in steady current. The k  turbulence model has been used for closure. Two kinds of groins are considered: (1) A vertical-wall groin, and (2) A groin with a side slope. Steady-flow simulations were conducted...

Common Variants of the ACE Gene and Aneurysmal Subarachnoid Hemorrhage in a Danish Population: A Case-control Study

DEFF Research Database (Denmark)

Staalsø, Jonatan Myrup; Nielsen, Morten; Edsen, Troels BS

2011-01-01

OBJECTIVE: The intron 16 insertion/deletion (I/D) polymorphism in the angiotensin-converting enzyme (ACE) gene has been associated with rupture of intracranial aneurysms, but the effect of haplotypes within ACE has not been studied. This study investigated whether ACE haplotypes including the I...... C/G, rs4305 C/T, rs4311 C/T, rs4331 T/C, rs4343 C/T) in the ACE gene were genotyped along with the I/D polymorphism. Haplotypes were estimated using the PHASE software. RESULTS: Fifty-five haplotypes were identified with 3 of these having a frequency above 5%: ACCCCIT (41.6±0.4%), TGTTTDC (32.......1±0.5%), and ACCTTDC (9.5±0.2%). No significant difference in distribution of alleles, genotypes, haplotypes, or haplotype pairs between the 2 populations was found. Specifically, we could not reproduce previously reported associations between the ACE I genotype and intracranial aneurysms. When subdivided into groups...

Variation in the ACE, PPARGC1A and PPARA genes in Lithuanian football players.

Science.gov (United States)

Gineviciene, Valentina; Jakaitiene, Audrone; Tubelis, Linas; Kucinskas, Vaidutis

2014-01-01

The aim of this study was to determine the impact of ACE (I/D), PPARGC1A (G/A) and PPARA (G/C) polymorphisms on footballers performance among 199 Lithuanian professional footballers and 167 sedentary, healthy men (controls). Genotyping was performed using polymerase chain reaction and restriction fragment length polymorphism methods on DNA from leucocytes. Results revealed that the angiotensin-1-coverting enzyme gene (ACE) genotype distribution was significantly different between total football players group (II 23.6%, ID 46.7% and DD 29.6%) and the controls (II 24.6%, ID 29.9% and DD 45.5%; P=0.002). Although investigating PPARGC1A (G/A) and PPARA (G/C) polymorphisms no significant results were obtained in the total football players group, however, significant differences were determined between forwards and controls [PPARGC1A: GG 54.6%, GA 29.5%, AA 15.9% vs. GG 49.7%, GA 44.3% and AA 6.0% (P = 0.044); PPARA: GG 52.3%, GC 40.9%, CC 6.8% vs. GG 72.4%, GC 24.6% and CC 3.0% (P = 0.034)]. In the whole cohort, the odds ratio of the genotype [ACE ID + PPARA GG] being a footballer was 1.69 (95% CI 1.04-2.74), and of [ACE ID + PPARGC1A GG] 1.93 (95% CI 1.10-3.37) and of [ACE II + PPARA GC] 2.83 (95% CI 1.02-7.91) compared to controls. It was revealed that ACE ID genotype together with PPARA GG and PPARGC1A GG as well as ACE II genotype with PPARA GC is probably the 'preferable genotype' for footballers. Summing up, the present study suggests that the ACE, PPARGC1A and PPARA polymorphisms genotypes are associated, separately and in combination, with Lithuanian footballers' performance.

Development of Portable Pulsed Neutron Generators Utilizing a D-T or D-D Fusion Reaction

International Nuclear Information System (INIS)

Nishimura, Kazuya; Miake, Yoshinobu; Kato, Michio; Rintsu, Yukou

2001-01-01

Prototypes of sealed neutron tubes in a D-T or D-D fusion reaction for logging while drilling (LWD) were developed; then operational tests were performed to check their functional properties. One of the prototypes passed most of the specified conditions for using LWD. Further studies were needed to put a sealed neutron tube into practical use. For applications to other fields, such as an in situ calibration source for neutron detector efficiencies and an in situ calibration source for fusion systems, a sealed neutron tube is needed to have higher-intensity neutron output and a long life. Thus, the performance of the ion source used in the neutron tube is improved to obtain high gas utilization efficiencies or low-pressure operation with high ionization efficiencies. The characteristics of the new ion sources used in the foregoing sealed neutron tube are discussed in terms of preliminary tests. The aforementioned performances are obtained

A D-D neutron generator using a titanium drive-in target

International Nuclear Information System (INIS)

Kim, I.J.; Jung, N.S.; Jung, H.D.; Hwang, Y.S.; Choi, H.D.

2008-01-01

A D-D neutron generator was developed with an intensity of 10 8 n/s. A helicon plasma ion source was used to produce a large current deuteron beam, and neutrons were generated by irradiating the deuteron beam on a titanium drive-in target made of commercial pure titanium. The neutron generator was test-run for several hundred hours, and the performances were investigated. The available range of the deuteron beam current was 0.8-8 mA and the beam could be accelerated up to 97.5 keV. The maximum neutron generation rate in the test-runs was 1.9 x 10 8 n/s, which was achieved by irradiating a 7.6 mA deuteron beam at 94.0 keV on a 0.5 mm-thick target. The operation of the neutron generator was fairly stable, such that the neutron generation rate was not altered by high voltage breakdowns during the test-runs. Neutron generation efficiency was rated as low as 10% when compared to an ideal case of irradiating a 100% monatomic deuteron beam on a perfect TiD 2 target. Factors causing the low efficiency were suggested and discussed

The D-D Neutron Generator as an Alternative to Am(Li) Isotopic Neutron Source in the Active Well Coincidence Counter

Energy Technology Data Exchange (ETDEWEB)

McElroy, Robert Dennis [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cleveland, Steven L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-03-01

The ²³⁵U mass assay of bulk uranium items, such as oxide canisters, fuel pellets, and fuel assemblies, is not achievable by traditional gamma-ray assay techniques due to the limited penetration of the item by the characteristic ²³⁵U gamma rays. Instead, fast neutron interrogation methods such as active neutron coincidence counting must be used. For international safeguards applications, the most commonly used active neutron systems, the Active Well Coincidence Counter (AWCC), Uranium Neutron Collar (UNCL) and ²⁵²Cf Shuffler, rely on fast neutron interrogation using an isotopic neutron source [i.e., ²⁵²Cf or Am(Li)] to achieve better measurement accuracies than are possible using gamma-ray techniques for high-mass, high-density items. However, the Am(Li) sources required for the AWCC and UNCL systems are no longer manufactured, and newly produced systems rely on limited supplies of sources salvaged from disused instruments. The ²⁵²Cf shuffler systems rely on the use of high-output ²⁵²Cf sources, which while still available have become extremely costly for use in routine operations and require replacement every five to seven years. Lack of a suitable alternative neutron interrogation source would leave a potentially significant gap in the safeguarding of uranium processing facilities. In this work, we made use of Oak Ridge National Laboratory’s (ORNL’s) Large Volume Active Well Coincidence Counter (LV-AWCC) and a commercially available deuterium-deuterium (D-D) neutron generator to examine the potential of the D-D neutron generator as an alternative to the isotopic sources. We present the performance of the LV-AWCC with D-D generator for the assay of ²³⁵U based on the results of Monte Carlo N-Particle (MCNP) simulations and measurements of depleted uranium (DU), low enriched uranium (LEU), and highly enriched uranium (HEU) items.

The development of the measurement technique of the control rod worth with the inverse kinetics method considering the influence of the steady neutron source

International Nuclear Information System (INIS)

Takeuchi, Mitsuo; Wada, Shigeru; Takahashi, Hiroyuki; Hayashi, Kazuhiko; Murayama, Yoji

2000-09-01

At the research reactor such as JRR-3M, the operation management is carried out in order to ensure safe operation, for example, the excess reactivity is measured regularly and confirmed that it satisfies a safety condition. The excess reactivity is calculated using control rod position in criticality and control rod worth measured by a positive period method (P.P method), the conventional inverse kinetic method (IK method) and so on. The neutron source, however, influences measurement results and brings in a measurement error. A new IK method considering the influence of the steady neutron sources is proposed and applied to the JRR-3M. This report shows that the proposed IK method measures control rod worth more precisely than a conventional IK method. (author)

Parallel Tracks as Quasi-steady States for the Magnetic Boundary Layers in Neutron-star Low-mass X-Ray Binaries

Energy Technology Data Exchange (ETDEWEB)

Erkut, M. Hakan [Physics Engineering Department, Faculty of Science and Letters, Istanbul Technical University, 34469, Istanbul (Turkey); Çatmabacak, Onur, E-mail: mherkut@gmail.com [Institute for Computational Sciences Y11 F74, University of Zurich, Winterthurerstrasse 190, CH-8057 Zurich (Switzerland)

2017-11-01

The neutron stars in low-mass X-ray binaries (LMXBs) are usually thought to be weakly magnetized objects accreting matter from their low-mass companions in the form of a disk. Albeit weak compared to those in young neutron-star systems, the neutron-star magnetospheres in LMXBs can play an important role in determining the correlations between spectral and temporal properties. Parallel tracks appearing in the kilohertz (kHz) quasi-periodic oscillation (QPO) frequency versus X-ray flux plane can be used as a tool to study the magnetosphere–disk interaction in neutron-star LMXBs. For dynamically important weak fields, the formation of a non-Keplerian magnetic boundary layer at the innermost disk truncated near the surface of the neutron star is highly likely. Such a boundary region may harbor oscillatory modes of frequencies in the kHz range. We generate parallel tracks using the boundary region model of kHz QPOs. We also present the direct application of our model to the reproduction of the observed parallel tracks of individual sources such as 4U 1608–52, 4U 1636–53, and Aql X-1. We reveal how the radial width of the boundary layer must vary in the long-term flux evolution of each source to regenerate the parallel tracks. The run of the radial width looks similar for different sources and can be fitted by a generic model function describing the average steady behavior of the boundary region over the long term. The parallel tracks then correspond to the possible quasi-steady states the source can occupy around the average trend.

TRUMP, Steady-State and Transient 1-D, 2-D and 3-D Potential Flow, Temperature Distribution

International Nuclear Information System (INIS)

Elrod, D.C.; Turner, W.D.

1981-01-01

1 - Description of problem or function: TRUMP solves a general non- linear parabolic partial differential equation describing flow in various kinds of potential fields, such as fields of temperature, pressure, or electricity and magnetism; simultaneously, it will solve two additional equations representing, in thermal problems, heat production by decomposition of two reactants having rate constants with a general Arrhenius temperature dependence. Steady- state and transient flow in one, two, or three dimensions are considered in geometrical configurations having simple or complex shapes and structures. Problem parameters may vary with spatial position, time, or primary dependent variables--temperature, pressure, or field strength. Initial conditions may vary with spatial position, and among the criteria that may be specified for ending a problem are upper and lower limits on the size of the primary dependent variable, upper limits on the problem time or on the number of time-steps or on the computer time, and attainment of steady state. 2 - Method of solution: Solutions may be obtained by use of explicit- or implicit-difference equations, or by an optimized combination of both. 3 - Restrictions on the complexity of the problem: The program currently provides for maxima of: 40 materials, 5 reactants, 105 surface conditions, 20 boundary nodes, 16 entries per tabulated function (table-length)

Left ventricular function assessment using a fast 3D gradient echo pulse sequence: comparison to standard multi-breath hold 2D steady state free precession imaging and accounting for papillary muscles and trabeculations.

Science.gov (United States)

Sievers, Burkhard; Schrader, Sebastian; Rehwald, Wolfgang; Hunold, Peter; Barkhausen, Joerg; Erbel, Raimund

2011-06-01

Papillary muscles and trabeculae for ventricular function analysis are known to significantly contribute to accurate volume and mass measurements. Fast imaging techniques such as three-dimensional steady-state free precession (3D SSFP) are increasingly being used to speed up imaging time, but sacrifice spatial resolution. It is unknown whether 3D SSFP, despite its reduced spatial resolution, allows for exact delineation of papillary muscles and trabeculations. We therefore compared 3D SSFP ventricular function measurements to those measured from standard multi-breath hold two-dimensional steady-state free precession cine images (standard 2D SSFP). 14 healthy subjects and 14 patients with impaired left ventricularfunction underwent 1.5 Tesla cine imaging. A stack of short axis images covering the left ventricle was acquired with 2D SSFP and 3D SSFP. Left ventricular volumes, ejection fraction, and mass were determined. Analysis was performed by substracting papillary muscles and trabeculae from left ventricular volumes. In addition, reproducibility was assessed. EDV, ESV, EF, and mass were not significantly different between 2D SSFP and 3D SSFP (mean difference healthy subjects: -0.06 +/- 3.2 ml, 0.54 +/- 2.2 ml, -0.45 +/- 1.8%, and 1.13 +/- 0.8 g, respectively; patients: 1.36 +/- 2.8 ml, -0.15 3.5 ml, 0.86 +/- 2.5%, and 0.91 +/- 0.9 g, respectively; P > or = 0.095). Intra- and interobserver variability was not different for 2D SSFP (P > or = 0.64 and P > or = 0.397) and 3D SSFP (P > or = 0.53 and P > or = 0.47). Differences in volumes, EF, and mass measurements between 3D SSFP and standard 2D SSFP are very small, and not statistically significant. 3D SSFP may be used for accurate ventricular function assessment when papillary muscles and trabeculations are to be taken into account.

Neutron environment in d + Li facilities

International Nuclear Information System (INIS)

Mann, F.M.; Schmittroth, F.; Carter, L.L.

1980-01-01

A microscopic d + Li neutron yield model has been developed based upon classical models and experimental data. Using equations suggested by the Serber and evaporation models, a generalized least squares adjustment procedure generated angular yields for E/sub d/ to 40 MeV using the available experimental data. The HEDL-UCD experiment at E/sub d/ = 35 was used to adjust parameters describing the neutron spectra. The model is used to predict yields, spectra, and damage responses in the FMIT Test Cell

Analysis and sensitivity studies with CORETRAN and RETRAN-3D of the NEACRP PWR rod ejection benchmark

Energy Technology Data Exchange (ETDEWEB)

Ferroukhi, H.; Coddington, P. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

2001-07-01

The OECD/NEA PWR rod ejection benchmark has been analysed using the 3-D nodal spatial-kinetic codes CORETRAN and RETRAN-3D. The following results were obtained. A) The agreement in 3-D solution between CORETRAN and RETRAN-3D was found to be very good both during steady-state and transient conditions. In particular at HZP (hot zero power), an excellent agreement in the initial steady-state 3-D power distribution and with regard to the core power excursion during the super-prompt critical phase of the transient (i.e. when the negative reactivity feedback is still very weak) was found. This illustrates the consistency in the neutronic solution between both codes. B) At both HZP and FP (full power) conditions, the CORETRAN and RETRAN-3D results lie well within the range of the previous benchmark solutions. In particular at HZP, both codes predict a power excursion and an increase in maximum pellet temperature that are among the closest results to those obtained with the benchmark reference solution. It must here be emphasised that these analyses are by no means a validation of the codes. However, the good agreement of both CORETRAN and RETRAN-3D with other 3-D solutions provides confidence in the ability of these codes to analyse LWR (light water reactor) core transients. In addition, it was found appropriate to perform, for this well-defined international benchmark problem, some sensitivity studies in order to assess the impact of modelling options on the CORETRAN and RETRAN-3D results. (authors)

Analysis and sensitivity studies with CORETRAN and RETRAN-3D of the NEACRP PWR rod ejection benchmark

International Nuclear Information System (INIS)

Ferroukhi, H.; Coddington, P.

2001-01-01

The OECD/NEA PWR rod ejection benchmark has been analysed using the 3-D nodal spatial-kinetic codes CORETRAN and RETRAN-3D. The following results were obtained. A) The agreement in 3-D solution between CORETRAN and RETRAN-3D was found to be very good both during steady-state and transient conditions. In particular at HZP (hot zero power), an excellent agreement in the initial steady-state 3-D power distribution and with regard to the core power excursion during the super-prompt critical phase of the transient (i.e. when the negative reactivity feedback is still very weak) was found. This illustrates the consistency in the neutronic solution between both codes. B) At both HZP and FP (full power) conditions, the CORETRAN and RETRAN-3D results lie well within the range of the previous benchmark solutions. In particular at HZP, both codes predict a power excursion and an increase in maximum pellet temperature that are among the closest results to those obtained with the benchmark reference solution. It must here be emphasised that these analyses are by no means a validation of the codes. However, the good agreement of both CORETRAN and RETRAN-3D with other 3-D solutions provides confidence in the ability of these codes to analyse LWR (light water reactor) core transients. In addition, it was found appropriate to perform, for this well-defined international benchmark problem, some sensitivity studies in order to assess the impact of modelling options on the CORETRAN and RETRAN-3D results. (authors)

Association Between ACE Gene Polymorphism and QT Dispersion in Patients with Acute Myocardial Infarction.

Science.gov (United States)

Karahan, Zulkuf; Ugurlu, Murat; Ucaman, Berzal; Veysel Ulug, Ali; Kaya, Ilyas; Cevik, Kemal; Sahin Adiyaman, Mehmet; Oztürk, Onder; Iyem, Hikmet; Ozdemir, Ferit

2016-01-01

Angiotensin converting enzyme (ACE) gene polymorphism is associated with high renin-angiotensin system causing myocardial fibrosis and ventricular repolarization abnormality. Based on these findings, this study was designed to determine the association between ACE gene insertion/deletion (I/D) polymorphism and QT dispersion after acute myocardial infarction (MI). The study included 108 patients with acute MI. Blood samples were obtained from all the patients for genomic DNA analysis. ECGs were recorded at baseline and at the end of a 6-month follow up. The OT dispersion was manually calculated. The mean age of the patients was 57.5 ±9.9 years (ranging from 36 to 70). The patients with DD genotype showed longer QT dispersion than patients with II or DI genotype at the baseline, while at the end of the six-month follow up the patients with DI genotype showed longer QT dispersion than patients with DD or II genotypes. However, the magnitude of the QT dispersion prolongation was higher in patients carrying the ACE D allele than patients who were not carrying it, at baseline and at the end of six-month follow up (52.5 ±2.6 msn vs. 47.5±2.1 msn at baseline, 57±3.2 msn vs. 53±2.6 msn in months, P: 0.428 and P: 0.613, respectively). Carriers of the D allele of ACE gene I/D polymorphism may be associated with QT dispersion prolongation in patients with MI.An interaction of QT dispersion and ACE gene polymorphism may be associated with an elevation of serum type I-C terminal pro-collagen concentration, possibly leading to myocardial fibrosis, and increased action potential duration.

New neutron imaging using pulsed sources. Characteristics of a pulsed neutron source and principle of pulsed neutron imaging

International Nuclear Information System (INIS)

Kiyanagi, Yoshiaki

2012-01-01

Neutron beam is one of important tools to obtain the transmission image of an object. Until now, steady state neutron sources such as reactors are mainly used for this imaging purpose. Recently, it has been demonstrated that pulsed neutron imaging based on accelerator neutron sources can provide a real-space distribution of physical information of materials such as crystallographic structure, element, temperature, hydrogen bound state, magnetic field and so on, by analyzing wavelength dependent transmission spectrum, which information cannot be observed or difficult to obtain with a traditional imaging method using steady state neutrons. Here, characteristics of the pulsed neutron source and principle of the pulsed neutron imaging are explained as a basic concept of the new method. (author)

The simplified P3 approach on a trigonal geometry in the nodal reactor code DYN3D

International Nuclear Information System (INIS)

Duerigen, S.; Fridman, E.

2011-01-01

DYN3D is a three-dimensional nodal diffusion code for steady-state and transient analyses of Light-Water Reactors with square and hexagonal fuel assembly geometries. Currently, several versions of the DYN3D code are available including a multi-group diffusion and a simplified P 3 (SP 3 ) neutron transport option. In this work, the multi-group SP 3 method based on trigonal-z geometry was developed. The method is applicable to the analysis of reactor cores with hexagonal fuel assemblies and allows flexible mesh refinement, which is of particular importance for WWER-type Pressurized Water Reactors as well as for innovative reactor concepts including block type High-Temperature Reactors and Sodium Fast Reactors. In this paper, the theoretical background for the trigonal SP 3 methodology is outlined and the results of a preliminary verification analysis are presented by means of a simplified WWER-440 core test example. The accordant cross sections and reference solutions were produced by the Monte Carlo code SERPENT. The DYN3D results are in good agreement with the reference solutions. The average deviation in the nodal power distribution is about 1%. (Authors)

Monte Carlo Simulation on Compensated Neutron Porosity Logging in LWD With D-T Pulsed Neutron Generator

International Nuclear Information System (INIS)

Zhang Feng; Hou Shuang; Jin Xiuyun

2010-01-01

The process of neutron interaction induced by D-T pulsed neutron generator and 241 Am-Be source was simulated by using Monte Carlo method. It is concluded that the thermal neutron count descend exponentially as the spacing increasing. The smaller porosity was, the smaller the differences between the two sources were. When the porosity reached 40%, the ratio of thermal neutron count generated by D-T pulsed neutron source was much larger than that generated by 241 Am-Be neutron source, and its distribution range was wider. The near spacing selected was 20-30 cm, and that of far spacing was about 60-70 cm. The detection depth by using D-T pulsed neutron source was almost unchanged under condition of the same sapcing, and the sensitivity of measurement to the formation porosity decreases. The results showed that it can not only guarantee the statistic of count, but also improve detection sensitivity and depth at the same time of increasing spacing. Therefore, 241 Am-Be neutron source can be replaced by D-T neutron tube in LWD tool. (authors)

Does the Angiotensin-converting enzyme (ACE gene insertion/deletion polymorphism modify the response to ACE inhibitor therapy? – A systematic review

Directory of Open Access Journals (Sweden)

Perna Annalisa

2005-10-01

Full Text Available Abstract Background Pharmacogenetic testing to individualize ACE inhibitor therapy remains controversial. We conducted a systematic review to assess the effect modification of the insertion/deletion (I/D polymorphism of the ACE gene on any outcome in patients treated with ACE inhibitors for cardiovascular and/or renal disease. Methods Our systematic review involved searching six electronic databases, then contacting the investigators (and pharmaceutical industry representatives responsible for the creation of these databases. Two reviewers independently selected relevant randomized, placebo-controlled trials and abstracted from each study details on characteristics and quality. Results Eleven studies met our inclusion criteria. Despite repeated efforts to contact authors, only four of the eleven studies provided sufficient data to quantify the effect modification by genotypes. We observed a trend towards better response to ACE inhibitors in Caucasian DD carriers compared to II carriers, in terms of blood pressure, proteinuria, glomerular filtration rate, ACE activity and progression to end-stage renal failure. Pooling of the results was inappropriate, due to heterogeneity in ethnicity, clinical domains and outcomes. Conclusion Lack of sufficient genetic data from the reviewed studies precluded drawing any convincing conclusions. Better reporting of genetic data are needed to confirm our preliminary observations concerning better response to ACE inhibitors among Caucasian DD carriers as compared to II carriers.

Whole core pin-by-pin coupled neutronic-thermal-hydraulic steady state and transient calculations using COBAYA3 code

International Nuclear Information System (INIS)

Jimenez, J.; Herrero, J. J.; Cuervo, D.; Aragones, J. M.

2010-10-01

Nowadays coupled 3-dimensional neutron kinetics and thermal-hydraulic core calculations are performed by applying a radial average channel approach using a meshing of one quarter of assembly in the best case. This approach does not take into account the subchannels effects due to the averaging of the physical fields and the loose of heterogeneity in the thermal-hydraulic model. Therefore the models do not have enough resolution to predict those subchannels effects which are important for the fuel design safety margins, because it is in the local scale, where we can search the hottest pellet or the maximum heat flux. The Polytechnic University of Madrid advanced multi-scale neutron-kinetics and thermal-hydraulics methodologies being implemented in COBAYA3 include domain decomposition by alternate core dissections for the local 3-dimensional fine-mesh scale problems (pin cells/subchannels) and an analytical nodal diffusion solver for the coarse mesh scale coupled with the thermal-hydraulic using a model of one channel per assembly or per quarter of assembly. In this work, we address the domain decomposition by the alternate core dissections methodology applied to solve coupled 3-dimensional neutronic-thermal-hydraulic problems at the fine-mesh scale. The neutronic-thermal-hydraulic coupling at the cell-subchannel scale allows the treatment of the effects of the detailed thermal-hydraulic feedbacks on cross-sections, thus resulting in better estimates of the local safety margins at the pin level. (Author)

Ion tail formation and its effect on 14-MeV neutron generation in D-3He plasmas

International Nuclear Information System (INIS)

Matsuura, H.; Nakao, Y.; Kudo, K.

1992-01-01

This paper reports on the triton distribution function in D- 3 He plasmas which is distorted from a Maxwellian owing to the presence of a 1.01-MeV birth component. The deuteron-triton reaction rate (i.e., 14-MeV neutron generation rate) in the plasma should be smaller than the values evaluated by assuming a Maxwellian triton distribution. A local Fokker-Planck calculation shows that although the degree of the decrease in 14-MeV neutron generation strongly depends on the plasma conditions and also on the energy loss mechanism, it becomes appreciable in actual burning plasmas

Coexistence of ACE (I/D) and PAI-1 (4G/5G) gene variants in recurrent miscarriage in Polish population.

Science.gov (United States)

Kurzawińska, Grażyna; Barlik, Magdalena; Drews, Krzysztof; Różycka, Agata; Seremak-Mrozikiewicz, Agnieszka; Ożarowski, Marcin; Klejewski, Andrzej; Czerny, Bogusław; Wolski, Hubert

2016-01-01

Recurrent miscarriage (RM) is one of the most common obstetric complications. Numerous studies have suggested that genetic variants leading to an impaired balance between coagulation and fibrinolysis may contribute to elevated risk of pregnancy loss. The aim of the study was to investigate a possible association between angiotensin-converting enzyme (ACE, rs1799752) I/D and plasminogen activator inhibitor type 1 (PAI-1, rs1799768) 4G/5G polymorphisms with RM among Polish women. DNA was extracted from peripheral blood samples of 152 women with a history of ≥ 2 consecutive pregnancy losses before 22 weeks of gestation, and 180 healthy controls with at least 1 live birth at term and no history of pregnancy loss. Polymerase chain reaction (PCR) and restriction fragment length polymorphism (RFLP) were used to identify the polymorphisms. No statistically significant differences were found in genotype and allele frequencies of the studied polymorphisms. The most relevant difference between the study group and controls was found for the ID genotype distribution of the ACE gene (52.6 vs. 46.7%, OR = 1.27, p = 0.28). The analysis of genotype coexistence revealed a higher incidence of the combination of the ACE II and the PAI-1 4G/4G genotypes in the control group (10.0 vs.5.9% in control group; p = 0.17). The obtained results suggest no apparent association between the ACE I/D, PAI-1 4G/5G polymorphisms and increased RM susceptibility in the analyzed Polish population.

Calibration of a D-T neutron generator

International Nuclear Information System (INIS)

Ito, Tadayuki

1980-01-01

The energy and production rate of neutrons from a thick target are discussed. The production rate of D-T neutrons is estimated by counting alpha particles with a silicon detector. In this case, it is necessary to evaluate a correction factor from the energy of deuteron, the reaction cross section, the stopping power of target materials and others. The factor was calculated and is shown in a figure. The energy spectrum of emitted neutrons is also estimated, where the atomic ratio of T and Ti is taken as a parameter. The shape of the spectrum is determined by the reaction cross section, and is not dependent on the ratio T/Ti. The errors due to competitive reactions, such as D(d, n) and D(d, p), are negligible. It is necessary for mutual comparison to take care of the target thickness, the acceleration voltage of D beam, the alpha-detector position, and the gain fluctuation of electronic circuits. (Kato, T.)

ACE I/D sequence variants but not MTHFR C677T, is strongly linked to malignant glioma risk and its variant DD genotype may act as a promising predictive biomarker for overall survival of glioma patients.

Science.gov (United States)

Pandith, Arshad A; Qasim, Iqbal; Zahoor, Wani; Shah, Parveen; Bhat, Abdul R

2018-01-10

ACE I/D and MTHFR C677T gene polymorphisms can be seen as candidate genes for glioma on the basis of their biological functions and their involvement in different cancers. The aim of this study was to analyze potential association and overall survival between MTHFR C677T and ACE I/D polymorphism in glioma patients in our population. We tested genotype distribution of 112 glioma patients against 141 cancer-free controls from the same region. Kaplan-Meier survival analysis was performed to evaluate overall survival of patients for both genes. No significant differences were found among MTHFR C677T wild type C and variant genotypes CT/TT with glioma patients. In ACE, the distribution of variant ID and DD was found to be significantly higher in glioma cases as compared to controls (pACE DD genotypes were highly presented in glioma cases 26.8% versus 10.6% in controls (pACE DD genotypes had the least estimated overall survival of 13.4months in comparison to 21. 7 and 17.6months for ACE II and I/D genotypes respectively. We conclude ACE I/D polymorphism plays a vital role in predisposition of higher risk for glioma. We also suggest that ACE DD genotypes may act as an important predictive biomarker for overall survival of glioma patients. Copyright © 2017. Published by Elsevier B.V.

Performance of a neutron transport code with full phase space decomposition on the Cray Research T3D

International Nuclear Information System (INIS)

Dorr, M.R.; Salo, E.M.

1995-01-01

We present performance results obtained on a 128-node Cray Research T3D computer by a neutron transport code implementing a standard mtiltigroup, discrete ordinates algorithm on a three-dimensional Cartesian grid. After summarizing the implementation strategy used to obtain a full decomposition of phase space (i.e., simultaneous parallelization of the neutron energy, directional and spatial variables), we investigate the scalability of the fundamental source iteration step with respect to each phase space variable. We also describe enhancements that have enabled performance rates approaching 10 gigaflops on the full 128-node machine

Steady-State VEP-Based Brain-Computer Interface Control in an Immersive 3D Gaming Environment

Directory of Open Access Journals (Sweden)

Burke R

2005-01-01

Full Text Available This paper presents the application of an effective EEG-based brain-computer interface design for binary control in a visually elaborate immersive 3D game. The BCI uses the steady-state visual evoked potential (SSVEP generated in response to phase-reversing checkerboard patterns. Two power-spectrum estimation methods were employed for feature extraction in a series of offline classification tests. Both methods were also implemented during real-time game play. The performance of the BCI was found to be robust to distracting visual stimulation in the game and relatively consistent across six subjects, with 41 of 48 games successfully completed. For the best performing feature extraction method, the average real-time control accuracy across subjects was 89%. The feasibility of obtaining reliable control in such a visually rich environment using SSVEPs is thus demonstrated and the impact of this result is discussed.

Molecular and recombinational mapping of mutations in the Ace locus of Drosophila melanogaster

International Nuclear Information System (INIS)

Nagoshi, R.N.; Gelbart, W.M.

1987-01-01

The Ace locus in Drosophila melanogaster is known to be the structural gene for acetylcholinesterase. Ace is located in a region of chromosome arm 3R which has been subjected to intensive genetic and molecular analysis. Previous deletion mapping studies have identified a 40-kb region with which the Ace gene resides. This report focuses on the further localization of Ace within this 40-kb interval. Within this region, selective fine structure recombinational analysis was employed to localize three recessive Ace lethals relative to unselected restriction site variations. These three mutations fall into a segment of 7 kb within the Ace interval. Fine structure recombinational analysis was also used to confirm that the Ace - phenotype of one deletion, Df(3R)Ace/sup HD1/, co-segregated with the molecular deletion. This deletion does not fully remove Ace activity, but it behaves as a recessive Ace lethal. Df(3R)Ace/sup HD1/ is the most distal Ace lesion identified and indicates that the Ace locus must extend at least 16 kb. Several poly(A)transcripts are detectable in the region defined by the Ace lesions. The position and extent of the Ace locus, as well as the types of transcripts found, is consistent with the recent findings which identified Torpedo-AChE homologous cDNA sequences in this region

Neutronics comparisons of d-Li and t-H2O neutron sources

International Nuclear Information System (INIS)

Doran, D.G.; Cierjacks, S.; Mann, F.M.; Greenwood, L.R.; Daum, E.

1995-01-01

Calculations were performed to compare the neutronics of two neutron source concepts which are candidates for an international fusion materials irradiation facility (IFMIF). One concept, d-Li, produces neutrons by stopping 35 MeV deuterons in a flowing lithium target. Criticism of this concept because of the high energy tail above 14 MeV gave rise to the t-H 2 O concept proposed by Cierjacks. It would generate neutrons below 14.6 MeV ( 2 O. Test volumes that met certain damage parameter criteria were estimated. Because of the softer spectra and somewhat lower yields for t-H 2 O, the d-Li concept was found to have a test volume advantage of a factor of 2 or more, depending on the material to be irradiated. ((orig.))

Development and characterization of a D-D fast neutron generator for imaging applications.

Science.gov (United States)

Adams, Robert; Bort, Lorenz; Zboray, Robert; Prasser, Horst-Michael

2015-02-01

The experimental characterization of a pulsed D-D fast neutron generator designed for fan-beam tomography applications is presented. Using Monte Carlo simulations the response of an LB6411 neutron probe was related to the neutron generator output. The yield was measured to be up to ∼10(7) neutrons/s. An aluminum block was moved stepwise between the source and a BC400 plastic scintillator detector in order to measure an edge response. This edge response was related to the neutron emitting spot size using Monte Carlo simulations and a simplified geometry-based model. The experimentally determined spot size of 2.2 mm agreed well with the simulated value of 1.5 mm. The time-dependence of pulsed output for various operating conditions was also measured. The neutron generator was found to satisfy design requirements for a planned fast neutron tomography arrangement based on a plastic scintillator detector array which is expected to be capable of producing 2D tomograms with a resolution of ∼1.5 mm. Copyright © 2014 Elsevier Ltd. All rights reserved.

Association of Angiotensin-Converting Enzyme (ACE) Gene Polymorphism with Inflammation and Cellular Cytotoxicity in Vitiligo Patients.

Science.gov (United States)

Rashed, Laila; Abdel Hay, Rania; Mahmoud, Rania; Hasan, Nermeen; Zahra, Amr; Fayez, Salwa

2015-01-01

Vitiligo is a disorder with profound heterogeneity in its aetio-pathophysiology. Angiotensin converting enzyme (ACE) plays an important role in the physiology of the vasculature, blood pressure and inflammation. An insertion/deletion (I/D) polymorphism of the ACE gene was reported be associated with the development of vitiligo. Our aim was to evaluate the ACE I/D polymorphism in vitiligo patients and controls. Our second aim was to find a possible association between ACE gene polymorphism and inflammatory mediators (as interleukin (IL)-6) and/or cellular cytotoxicity induced by serum nitrite (as a breakdown product of the cytotoxic nitric oxide) in vitiligo patients. This case-control study included 74 vitiligo patients and 75 apparently healthy controls. The distribution of ACE gene I/D genotype was investigated using PCR. Serum ACE, IL-6 and nitrite were measured by colorimetric method, ELISA and Griess assay respectively. The ACE allele frequency was significantly different between vitiligo patients and healthy controls (P = 0.026). However there was no significant difference between the ACE genotyping frequency in both groups (P = 0.115). There were statistically significant higher VIDA score (P = 0.007), and serum IL-6 (P ACE, IL-6 and nitrite in vitiligo patients were statistically significantly higher than those in controls. As a conclusion, ACE gene polymorphism might grant susceptibility to develop vitiligo. Serum IL-6 and nitrite levels might have an important role in the pathogenesis of vitiligo. Targeting these two factors might have an implication in the treatment of some resistant cases.

First PGAA and NAA experimental results from a compact high intensity D-D neutron generator

International Nuclear Information System (INIS)

Reijonen, J.; Leung, K.-N.; Firestone, R.B.; English, J.A.; Perry, D.L.; Smith, A.; Gicquel, F.; Sun, M.; Bandong, B.; Garabedian, G.; Revay, Zs.; Szentmiklosi, L.; Molnar, G.

2003-01-01

Various types of neutron generator systems have been designed and tested at the Plasma and Ion Source Technology Group at Lawrence Berkeley National Laboratory. These generators are based on a D-D fusion reaction. These high power D-D neutron generators can provide neutron fluxes in excess of the current state of the art D-T neutron generators, without the use of pre-loaded targets or radioactive tritium gas. Safe and reliable long-life operations are the typical features of these D-D generators. All of the neutron generators developed in the Plasma and Ion Source Technology Group are utilizing powerful RF-induction discharge to generate the deuterium plasma. One of the advantages of using the RF-induction discharge is it's ability to generate high fraction of atomic ions from molecular gases, and the ability to generate high plasma densities for high extractable ion current from relatively small discharge volume

Comparison of the PHISICS/RELAP5-3D Ring and Block Model Results for Phase I of the OECD MHTGR-350 Benchmark

Energy Technology Data Exchange (ETDEWEB)

Gerhard Strydom

2014-04-01

The INL PHISICS code system consists of three modules providing improved core simulation capability: INSTANT (performing 3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and a perturbation/mixer module. Coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D has recently been finalized, and as part of the code verification and validation program the exercises defined for Phase I of the OECD/NEA MHTGR 350 MW Benchmark were completed. This paper provides an overview of the MHTGR Benchmark, and presents selected results of the three steady state exercises 1-3 defined for Phase I. For Exercise 1, a stand-alone steady-state neutronics solution for an End of Equilibrium Cycle Modular High Temperature Reactor (MHTGR) was calculated with INSTANT, using the provided geometry, material descriptions, and detailed cross-section libraries. Exercise 2 required the modeling of a stand-alone thermal fluids solution. The RELAP5-3D results of four sub-cases are discussed, consisting of various combinations of coolant bypass flows and material thermophysical properties. Exercise 3 combined the first two exercises in a coupled neutronics and thermal fluids solution, and the coupled code suite PHISICS/RELAP5-3D was used to calculate the results of two sub-cases. The main focus of the paper is a comparison of the traditional RELAP5-3D “ring” model approach vs. a much more detailed model that include kinetics feedback on individual block level and thermal feedbacks on a triangular sub-mesh. The higher fidelity of the block model is illustrated with comparison results on the temperature, power density and flux distributions, and the typical under-predictions produced by the ring model approach are highlighted.

ACE polymorphism does not determine short-term renal response to ACE-inhibition in proteinuric patients

NARCIS (Netherlands)

vanderKleij, FGH; Navis, GJ; Gansevoort, RT; Scheffer, H; deZeeuw, D; deJong, PE

1997-01-01

Background. The renal response to ACE inhibition is known to vary between individuals. The ACE genotype is a determinant of the ACE concentrations in plasma and tissue, and therefore might affect the renal response to ACE inhibition in renal patients. Methods. To test this hypothesis we studied the

Compact D-D Neutron Source-Driven Subcritical Multiplier and Beam-Shaping Assembly for Boron Neutron Capture Therapy

International Nuclear Information System (INIS)

Ganda, Francesco; Vujic, Jasmina; Greenspan, Ehud; Leung, Ka-Ngo

2010-01-01

This work assesses the feasibility of using a small, safe, and inexpensive keff 0.98 subcritical fission assembly [subcritical neutron multiplier (SCM)] to amplify the treatment neutron beam intensity attainable from a compact deuterium-deuterium (D-D) fusion neutron source delivering [approximately]1012 n/s. The objective is to reduce the treatment time for deep-seated brain tumors to [approximately]1 h. The paper describes the optimal SCM design and two optimal beam-shaping assemblies (BSAs) - one designed to maximize the dose rate and the other designed to maximize the total dose that can be delivered to a deep-seated tumor. The neutron beam intensity amplification achieved with the optimized SCM and BSA results in an increase in the treatment dose rate by a factor of 18: from 0.56 Gy/h without the SCM to 10.1 Gy/h. The entire SCM is encased in an aluminum structure. The total amount of 20% enriched uranium required for the SCM is 8.5 kg, and the cost (not including fabrication) is estimated to be less than $60,000. The SCM power level is estimated at 400 W when driven by a 1012 n/s D-D neutron source. This translates into consumption of only [approximately]0.6% of the initially loaded 235U atoms during 50 years of continuous operation and implies that the SCM could operate continuously for the entire lifetime of the facility without refueling. Cooling the SCM does not pose a challenge; it may be accomplished by natural circulation as the maximum heat flux is only 0.034 W/cm2.

A 2D/1D coupling neutron transport method based on the matrix MOC and NEM methods

International Nuclear Information System (INIS)

Zhang, H.; Zheng, Y.; Wu, H.; Cao, L.

2013-01-01

A new 2D/1D coupling method based on the matrix MOC method (MMOC) and nodal expansion method (NEM) is proposed for solving the three-dimensional heterogeneous neutron transport problem. The MMOC method, used for radial two-dimensional calculation, constructs a response matrix between source and flux with only one sweep and then solves the linear system by using the restarted GMRES algorithm instead of the traditional trajectory sweeping process during within-group iteration for angular flux update. Long characteristics are generated by using the customization of commercial software AutoCAD. A one-dimensional diffusion calculation is carried out in the axial direction by employing the NEM method. The 2D and ID solutions are coupled through the transverse leakage items. The 3D CMFD method is used to ensure the global neutron balance and adjust the different convergence properties of the radial and axial solvers. A computational code is developed based on these theories. Two benchmarks are calculated to verify the coupling method and the code. It is observed that the corresponding numerical results agree well with references, which indicates that the new method is capable of solving the 3D heterogeneous neutron transport problem directly. (authors)

A 2D/1D coupling neutron transport method based on the matrix MOC and NEM methods

Energy Technology Data Exchange (ETDEWEB)

Zhang, H.; Zheng, Y.; Wu, H.; Cao, L. [School of Nuclear Science and Technology, Xi' an Jiaotong University, No. 28, Xianning West Road, Xi' an, Shaanxi 710049 (China)

2013-07-01

A new 2D/1D coupling method based on the matrix MOC method (MMOC) and nodal expansion method (NEM) is proposed for solving the three-dimensional heterogeneous neutron transport problem. The MMOC method, used for radial two-dimensional calculation, constructs a response matrix between source and flux with only one sweep and then solves the linear system by using the restarted GMRES algorithm instead of the traditional trajectory sweeping process during within-group iteration for angular flux update. Long characteristics are generated by using the customization of commercial software AutoCAD. A one-dimensional diffusion calculation is carried out in the axial direction by employing the NEM method. The 2D and ID solutions are coupled through the transverse leakage items. The 3D CMFD method is used to ensure the global neutron balance and adjust the different convergence properties of the radial and axial solvers. A computational code is developed based on these theories. Two benchmarks are calculated to verify the coupling method and the code. It is observed that the corresponding numerical results agree well with references, which indicates that the new method is capable of solving the 3D heterogeneous neutron transport problem directly. (authors)

Detail analysis of fusion neutronics benchmark experiment on beryllium

International Nuclear Information System (INIS)

Konno, Chikara; Ochiai, Kentaro; Takakura, Kosuke; Ohnishi, Seiki; Kondo, Keitaro; Wada, Masayuki; Sato, Satoshi

2010-01-01

Our previous analysis of the integral experiments (in situ and TOF experiments) on beryllium with DT neutrons at JAEA/FNS pointed out two problems by using MCNP4C and the latest nuclear data libraries; one was a strange larger neutron peak around 12 MeV appearing in the TOF experiment analysis with JEFF-3.1 and the other was an overestimation on law energy neutrons in the in situ experiment analyses with all the nuclear data libraries. We investigated reasons for these problems in detail. It was found out that the official ACE file MCJEFF3.1 of JEFF-3.1 had an inconsistency with the original JEFF-3.1, which caused the strange larger neutron peak around 12 MeV in the TOF experiment analysis. We also found out that the calculated thermal neutron peak was probably too large in the in situ experiment. On trial we examined influence of the thermal neutron scattering law data of beryllium metal in ENDF/B-VI. The result pointed out that the coherent elastic scattering cross-section data in the thermal neutron scattering law data of beryllium metal were probably too large.

A meta-analysis of the accuracy of the Addenbrooke's Cognitive Examination (ACE) and the Addenbrooke's Cognitive Examination-Revised (ACE-R) in the detection of dementia.

Science.gov (United States)

Larner, Andrew J; Mitchell, Alex J

2014-04-01

The Addenbrooke's Cognitive Examination (ACE) and its Revised version (ACE-R) are relatively new screening tools for cognitive impairment that may improve upon the well-known Mini-Mental State Examination (MMSE) and other brief batteries. We systematically reviewed diagnostic accuracy studies of ACE and ACE-R. Published studies comparing ACE, ACE-R and MMSE were comprehensively sought and critically appraised. A meta-analysis of suitable studies was conducted. Of 61 possible publications identified, meta-analysis of qualifying studies encompassed 5 for ACE (1,090 participants) and 5 for ACE-R (1156 participants); of these, 9 made direct comparisons with the MMSE. Sensitivity and specificity of the ACE were 96.9% (95% CI = 92.7% to 99.4%) and 77.4% (95% CI = 58.3% to 91.8%); and for the ACE-R were 95.7% (95% CI = 92.2% to 98.2%) and 87.5% (95% CI = 63.8% to 99.4%). In a modest prevalence setting, such as primary care or general hospital settings where the prevalence of dementia may be approximately 25%, overall accuracy of the ACE (0.823) was inferior to ACE-R (0.895) and MMSE (0.882). In high prevalence settings such as memory clinics where the prevalence of dementia may be 50% or higher, overall accuracy again favored ACE-R (0.916) over ACE (0.872) and MMSE (0.895). The ACE-R has somewhat superior diagnostic accuracy to the MMSE while the ACE appears to have inferior accuracy. The ACE-R is recommended in both modest and high prevalence settings. Accuracy of newer versions of the ACE remain to be determined.

A Human Long Non-Coding RNA ALT1 Controls the Cell Cycle of Vascular Endothelial Cells Via ACE2 and Cyclin D1 Pathway

Directory of Open Access Journals (Sweden)

Wen Li

2017-10-01

Full Text Available Background/Aims: ALT1 is a novel long non-coding RNA derived from the alternatively spliced transcript of the deleted in lymphocytic leukemia 2 (DLEU2. To date, ALT1 biological roles in human vascular endothelial cells have not been reported. Methods: ALT1 was knocked down by siRNAs. Cell proliferation was analyzed by cck-8. The existence and sequence of human ALT1 were identified by 3’ rapid amplification of cDNA ends. The interaction between lncRNA and proteins was analyzed by RNA-Protein pull down assay, RNA immunoprecipitation, and mass spectrometry analysis. Results: ALT1 was expressed in human umbilical vein endothelial cells (HUVECs. The expression of ALT1 was significantly downregulated in contact-inhibited HUVECs and in hypoxia-induced, growth-arrested HUVECs. Knocking down of ALT1 inhibited the proliferation of HUVECs by G0/G1 cell cycle arrest. We observed that angiotensin converting enzyme Ⅱ(ACE2 was a direct target gene of ALT1. Knocking-down of ALT1 or its target gene ACE2 could efficiently decrease the expression of cyclin D1 via the enhanced ubiquitination and degradation, in which HIF-1α and protein von Hippel-Lindau (pVHL might be involved. Conclusion: The results suggested the human long non-coding RNA ALT1 is a novel regulator for cell cycle of HUVECs via ACE2 and cyclin D1 pathway.

Utilization of low voltage D-T neutron generators in neutron physics studies

International Nuclear Information System (INIS)

Singkarat, S.

1995-01-01

In a small nuclear laboratory of a developing country a low voltage D-T neutron generator can be a very useful scientific apparatus. Such machines have been used successfully for more than 40 years in teaching and scientific research. The original continuous mode 150-kV D-T neutron generator has been modified to have also a capability of producing 2-ns pulsed neutrons. Together with a carefully designed 10 m long flight path collimator and shielding of a 25 cm diameter · 10 cm thick BC-501 neutron detector, the pulsing system was successfully used for measuring the double differential cross-section (DDX) of natural iron for 14.1-MeV neutron from the angle of 30 deg to 150 deg in 10 deg steps. In order to extend the utility of the generator, two methods for converting the almost monoenergetic 14-MeV neutrons to monoenergetic neutrons of lower energy were proposed and tested. Both designs used the neutron-proton interaction at a circular surface-of-revolution made of hydrocarbon materials. The first design is for a pulsed neutron generator and the second design is for an ordinary continuous mode generator. The latter method was successfully used to measure the scintillation light output of a 1.4 cm diameter spherical NE-213 scintillation detector. The neutron generator has also been used in the continuous search for improved neutron detection techniques. There is a proposal, based on Monte Carlo calculations, of using a scintillation fiber for a fast neutron spectrometer. Due to the slender shape of the fiber, the pattern of produced light gives a peak in the pulse height spectrum instead of the well-known rectangular-like distribution, when the fiber is bombarded end-on by a beam of 14-MeV neutrons. Experimental investigations were undertaken. Detailed investigations on the light transportation property of a short fiber were performed. The predicted peak has not yet been found but the fiber detector may be developed as a directional discrimination fast neutron

4D space access neutron spectrometer 4SEASONS (SIKI)

International Nuclear Information System (INIS)

Kajimoto, Ryoichi; Nakamura, Mitsutaka

2010-01-01

The 4D Space Access Neutron Spectrometer (4SEASONS) is a high-intensity Fermi-chopper spectrometer. It is intended to provide high counting rate for thermal neutrons with medium resolution (ΔE/E i -6% at E=0) to efficiently collect weak inelastic signals from novel spin and lattice dynamics especially in high-T c superconductors and related materials. To achieve this goal, the spectrometer equips advanced instrumental design such as an elliptic-shaped converging neutron guide coated with high-Q c (m=3-4) supermirror, and long-length (2.5 m) 3 He position sensitive detectors (PSDs) arranged cylindrically inside the vacuum scattering chamber. Furthermore, the spectrometer is ready for multi-incident-energy measurements by the repetition rate multiplication method, which greatly improves the measurement efficiency. (author)

The Los Alamos Intense Neutron Source

International Nuclear Information System (INIS)

Nebel, R.A.; Barnes, D.C.; Bollman, R.; Eden, G.; Morrison, L.; Pickrell, M.M.; Reass, W.

1997-01-01

The Intense Neutron Source (INS) is an Inertial Electrostatic Confinement (IEC) fusion device presently under construction at Los Alamos National Laboratory. It is designed to produce 10 11 neutrons per second steady-state using D-T fuel. Phase 1 operation of this device will be as a standard three grid IEC ion focus device. Expected performance has been predicted by scaling from a previous IEC device. Phase 2 operation of this device will utilize a new operating scheme, the Periodically Oscillating Plasma Sphere (POPS). This scheme is related to both the Spherical Reflect Diode and the Oscillating Penning Trap. With this type of operation the authors hope to improve plasma neutron production to about 10 13 neutrons/second

3D MR cisternography to identify distal dural rings. Comparison of 3D-CISS and 3D-SPACE sequences

International Nuclear Information System (INIS)

Watanabe, Yoshiyuki; Makidono, Akari; Nakamura, Miho; Saida, Yukihisa

2011-01-01

The distal dural ring (DDR) is an anatomical landmark used to distinguish intra- and extradural aneurysms. We investigated identification of the DDR using 2 three-dimensional (3D) magnetic resonance (MR) cisternography sequences-3D constructive interference in steady state (CISS) and 3D sampling perfection with application optimized contrasts using different flip angle evolutions (SPACE)-at 3.0 tesla. Ten healthy adult volunteers underwent imaging with 3D-CISS, 3D-SPACE, and time-of-flight (TOF) MR angiography (TOF-MRA) sequences at 3.0T. We analyzed DDR identification and internal carotid artery (ICA) signal intensity and classified the shape of the carotid cave. We identified the DDR using both 3D-SPACE and 3D-CISS, with no significant difference between the sequences. Visualization of the outline of the ICA in the cavernous sinus (CS) was significantly clearer with 3D-SPACE than 3D-CISS. In the CS and petrous portions, signal intensity was lower with 3D-SPACE, and the flow void was poor with 3D-CISS in some subjects. We identified the DDR with both 3D-SPACE and 3D-CISS, but the superior contrast of the ICA in the CS using 3D-SPACE suggests the superiority of this sequence for evaluating the DDR. (author)

Validation of new 3-D neutronics model in APROS for hexagonal geometry

International Nuclear Information System (INIS)

Rintala, J.

2010-01-01

APROS - Advanced PROcess Simulation environment-is a widely used simulation tool for nuclear power plant modelling. Earlier the three-dimensional neutronics calculation has been based on model using the difference method. The original three-dimensional core model is mainly used in power plant simulator applications, where it fits well because of its speed. For safety analysis purposes, however, a new model was considered to be an important improvement to meet the accuracy requirements. A sophisticated nodal model used already in HEXTRAN and TRAB-3D was decided to be implemented into APROS. The hexagonal part of the model has now been implemented and tested. For practical reasons, the model was programmed from scratch into APROS and also some small improvements were added and thus, an extensive validation program was necessary to prove the correct behaviour of the model. In this paper, the most important results from AER kinetic benchmarks 2 and 3 calculations are shown as well as the calculation results against data achieved LR-0 test reactor space-time kinetic experiments. Since the model is similar to the one in HEXTRAN, the results in benchmarks are compared to the results by it. In LR-0 calculations, results by both, original and new model are presented and compared to the measurements. The results shows that the implementation of the model has been successful and the new model improves the accuracy of three-dimensional neutronics calculation in APROS into the level required in safety analyses. (Author)

Computer code TRANS-ACE predicting for fire and explosion accidents in nuclear fuel reprocessing plants

International Nuclear Information System (INIS)

Abe, Hitoshi; Nishio; Gunji; Naito, Yoshitaka

1993-11-01

The accident analysis code TRANS-ACE was developed to evaluate the safety of a ventilation system in a reprocessing plant in the event of fire and explosion accidents. TRANS-ACE can evaluate not only the integrity of a ventilation system containing HEPA filters but also the source term of radioactive materials for release out of a plant. It calculates the temperature, pressure, flow rate, transport of combustion materials and confinement of radioactive materials in the network of a ventilation system that might experience a fire or explosion accident. TRANS-ACE is based on the one-dimensional compressible thermo-fluid analysis code EVENT developed by Los Alamos National Laboratory (LANL). Calculational functions are added for the radioactive source term, heat transfer and radiation to cell and duct walls and HEPA filter integrity. For the second edition in the report, TRANS-ACE has been improved incorporating functions for the initial steady-state calculation to determine the flow rates, pressure drops and temperature in the network before an accident mode analysis. It is also improved to include flow resistance calculations of the filters and blowers in the network and to have an easy to use code by simplifying the input formats. This report is to prepare an explanation of the mathematical model for TRANS-ACE code and to be the user's manual. (author)

Utilization of low voltage D-T neutron generators in neutron physics studies

Energy Technology Data Exchange (ETDEWEB)

Singkarat, S.

1995-08-01

In a small nuclear laboratory of a developing country a low voltage D-T neutron generator can be a very useful scientific apparatus. Such machines have been used successfully for more than 40 years in teaching and scientific research. The original continuous mode 150-kV D-T neutron generator has been modified to have also a capability of producing 2-ns pulsed neutrons. Together with a carefully designed 10 m long flight path collimator and shielding of a 25 cm diameter {center_dot} 10 cm thick BC-501 neutron detector, the pulsing system was successfully used for measuring the double differential cross-section (DDX) of natural iron for 14.1-MeV neutron from the angle of 30 deg to 150 deg in 10 deg steps. In order to extend the utility of the generator, two methods for converting the almost monoenergetic 14-MeV neutrons to monoenergetic neutrons of lower energy were proposed and tested. The first method uses a pulsed neutron generator and the second method uses an ordinary continuous mode generator. The latter method was successfully used to measure the scintillation light output of a 1.4 cm diameter spherical NE-213 scintillation detector. The neutron generator has also been used in the continuous search for improved neutron detection techniques. There is a proposal, based on Monte Carlo calculations, of using a scintillation fiber for a fast neutron spectrometer. Due to the slender shape of the fiber, the pattern of produced light gives a peak in the pulse height spectrum instead of the well-known rectangular-like distribution, when the fiber is bombarded end-on by a beam of 14-MeV neutrons. Experimental investigations were undertaken. Detailed investigations on the light transportation property of a short fiber were performed. The predicted peak has not yet been found but the fiber detector may be developed as a directional discrimination fast neutron detector. 18 refs.

A feasibility study using radiochromic films for fast neutron 2D passive dosimetry

International Nuclear Information System (INIS)

Brady, Samuel L; Fallin, Brent; Gunasingha, Rathnayaka; Yoshizumi, Terry T; Howell, Calvin R; Crowell, Alexander S; Tonchev, Anton P; Dewhirst, Mark W

2010-01-01

The objective of this paper is threefold: (1) to establish sensitivity of XRQA and EBT radiochromic films to fast neutron exposure; (2) to develop a film response to radiation dose calibration curve and (3) to investigate a two-dimensional (2D) film dosimetry technique for use in establishing an experimental setup for a radiobiological irradiation of mice and to assess the dose to the mice in this setup. The films were exposed to a 10 MeV neutron beam via the 2 H(d,n) 3 He reaction. The XRQA film response was a factor of 1.39 greater than EBT film response to the 10 MeV neutron beam when exposed to a neutron dose of 165 cGy. A film response-to-soft tissue dose calibration function was established over a range of 0-10 Gy and had a goodness of fit of 0.9926 with the calibration data. The 2D film dosimetry technique estimated the neutron dose to the mice by measuring the dose using a mouse phantom and by placing a piece of film on the exterior of the experimental mouse setup. The film results were benchmarked using Monte Carlo and aluminum (Al) foil activation measurements. The radiochromic film, Monte Carlo and Al foil dose measurements were strongly correlated, and the film within the mouse phantom agreed to better than 7% of the externally mounted films. These results demonstrated the potential application of radiochromic films for passive 2D neutron dosimetry.

X-ray and neutron scattering investigations of YCo3-H

International Nuclear Information System (INIS)

Benham, M.J.; Bennington, S.M.; Ross, D.K.; Noreus, D.; Yamaguchi, M.

1989-01-01

Various structural studies of YCo 3 H(D) x in the β-phase (0 2 . Neutron diffraction and inelastic neutron scattering were also used in tandem, and hydrogen occupation of a single (36i) tetrahedral site was inferred for the entire concentration range. (orig.)

Development of ultracold neutron detectors and a polarization analyzing system for the measurement of the neutron electric dipole moment; Developpement de detecteurs de neutrons ultra-froids et d'un systeme d'analyse de polarisation pour la mesure du moment electrique dipolaire du neutron

Energy Technology Data Exchange (ETDEWEB)

Rogel, Gwendal

2009-10-29

ete mesurees. Sous les conditions experimentales du spectrometre EDM, le scintillateur GS10 s'est montre competitif avec le detecteur a gaz {sup 3}He. Un systeme de double scintillateur GS3/GS20 a permis d'ameliorer la separation entre signaux neutrons et gammas. Il s'est avere 20% moins efficace que le detecteur a gaz 3He sous le spectrometre EDM. Le Cascade-U a, quant a lui, montre qu'il etait 20% moins efficace qu'un GS10 de 500 microns d'epaisseur comme l'ont conrme des simulations. Un nouveau systeme d'analyse simultanee de spin est presente. Il consiste en deux systemes de detection (bras) possedant chacun un spin flipper adiabatique, un analyseur de spin, et un detecteur. Les bras detectent chacun une composante de polarisation, permettant ainsi un comptage des deux etats de spin du neutron. Des tests d'un prototype monte en situation horizontale a l'ILL ont montre que le pouvoir d'analyse des bras etait de 80%. La transmission du systeme sans analyseurs est de 50%. (auteur)

MODELING THE RADIATION SHIELDING OF BORON NEUTRON CAPTURE THERAPY BASED ON 2.4 MEV D-D NEUTRON GENERATOR FACILITY

Directory of Open Access Journals (Sweden)

Muhammad Mu’Alim

2018-01-01

PEMODELAN PERISAI RADIASI PADA FASILITAS BORON NEUTRON CAPTURE THERAPY BERBASIS GENERATOR NEUTRON D-D 2,4 MeV. Telah dimodelkan perisai radiasi pada fasilitas Boron Neutron Capture Therapy (BNCT berbasis reaksi D-D pada Neutron Generator 2,4 MeV dengan Beam Shaping Assembly (BSA yang telah didesain sebelumnya. Pemodelan ini dilakukan untuk memperoleh suatu desain perisai radiasi untuk fasilitas BNCT berbasis generator neutron 2,4 MeV. Pemodelan dilakukan dengan cara memvariasikan bahan dan ketebalan perisasi radiasi. Bahan yang dipilih adalah beton barit, parafin, polietilen terborasi dan timbal. Perhitungan dilakukan menggunakan program MCNPX dengan tally F4 untuk menentukan laju dosis yang keluar dari perisai radiasi. Desain periasi radiasi dinyatakan optimal jika radiasi yang dihasilkan diluar perisai radiasi tidak melebihi Nilai Batas Dosis (NBD yang telah ditentukan oleh BAPETEN. Hasilnya, diperoleh suatu desain perisai radiasi menggunakan lapisan utama beton barit setebal 100 cm yang mengelilingi ruangan 100 cm x 100 cm x 166,4 cm dan polietilen terborasi 40 cm yang mengelilingi bahan beton barit. Kemudian ditambahkan beton barit 10 cm dan polietilen terborasi 10 cm untuk mengurangi radiasi primer yang lurus dari BSA setelah keluar dari lapisan utama. Laju dosis terbesar adalah 4,58 μSv·jam-1 pada sel 227 dan laju dosis rata-rata yang dihasilkan adalah sebesar 0,65 µSv·jam-1. Nilai laju dosis tersebut masih dibawah ambang batas NBD yang diperbolehkan oleh BAPETEN untuk pekerja radiasi. Kata kunci: Perisai radiasi, tally, laju dosis radiasi, BSA, BNCT

Fusion blankets for catalyzed D--D and D--He3 reactors

International Nuclear Information System (INIS)

Fillo, J.A.; Powell, J.R.

1977-01-01

Blanket designs are presented for catalyzed D-D (Cat-D) and D-He 3 fusion reactors. Because of relatively low neutron wall loads and the flexibility due to non-tritium breeding, blankets potentially should operate for reactor life-times of approximately 30 years. Unscheduled replacement of failed blanket modules should be relatively rapid, due to very low residual activity, by operators working either through access ports in the shield (option 1) or directly in the plasma chamber (option 2). Cat-D blanket designs are presented for high (approximately 30%) and low (approximately 12%) β noncircular Tokamak reactors. The blankets are thick graphite screens, operating at high temperature to anneal radiation damage; the deposited neutron and gamma energy is thermally radiated along internal cavities and conducted to a bank of internal SiC coolant tubes (approximately 4 cm. ID) containing high pressure helium. In the D-He 3 Tokamak reactor design, the blanket consists of multiple layers (e.g., three) of thin (approximately 10 cm.) high strength aluminum (e.g., SAP), modular plates, cooled by organic terphynyl coolant

Fusion blankets for catalyzed D--D and D--3He reactors

International Nuclear Information System (INIS)

Fillo, J.A.; Powell, J.R.

1977-01-01

Blanket designs are presented for catalyzed D-D (Cat-D) and D-He 3 fusion reactors. Because of relatively low neutron wall loads and the flexibility due to non-tritium breeding, blankets potentially should operate for reactor life-times of approximately 30 years. Unscheduled replacement of failed blanket modules should be relatively rapid, due to very low residual activity, by operators working either through access ports in the shield (option 1) or directly in the plasma chamber (option 2). Cat-D blanket designs are presented for high (approximately 30%) and low (approximately 12%) β non-circular Tokamak reactors. The blankets are thick graphite screens, operating at high temperature to anneal radiation damage; the deposited neutron and gamma energy is thermally radiated along internal cavities and conducted to a bank of internal SiC coolant tubes (approximately 4 cm. ID) containing high pressure helium. In the D-He 3 Tokamak reactor design, the blanket consists of multiple layers (e.g., three) of thin (approximately 10 cm.) high strength aluminum (e.g., SAP), modular plates, cooled by organic terphenyl coolant

Extraction of the 1S0 neutron-neutron scattering length from a kinematically-complete n-d breakup experiment at TUNL

International Nuclear Information System (INIS)

Gonzalez Trotter, D. E.; Tornow, W.; Howell, C. R.; Salinas, F.; Walter, R. L.; Witalea, H.

1999-01-01

The 1 S 0 neutron-neutron (nn) scattering length's currently accepted value (a nn =-18.6±0.3 fm) is derived exclusively from two π - -d capture-reaction experiments, in disagreement with the average -16.7±0.5 fm extracted from kinematically-complete nd breakup experiments. This discrepancy may be due to deficiencies in the analyses of n-d breakup data and/or three-nucleon force (3NF) effects. A kinematically-complete n+d→n 1 +n 2 +p breakup experiment at an incident neutron energy of 13.0 MeV was performed recently at TUNL. The value of a nn was extracted from the direct comparison of experimental and rigorously-calculated theoretical nd breakup differential cross sections at four production angles of the nn pair. Using modern nucleon-nucleon potential models in the three-nucleon cross-section calculations we obtained a nn =-18.7±0.6 fm, in agreement with the π - -d result. We found no significant effect due to 3NFs on our a nn value

The Influence of Pickup Protons, from Interstellar Neutral Hydrogen, on the Propagation of Interplanetary Shocks from the Halloween 2003 Solar Events to ACE and Ulysses: A 3-D MHD Modeling Study

Science.gov (United States)

Detman, T. R.; Intriligator, D. S.; Dryer, M.; Sun, W.; Deehr, C. S.; Intriligator, J.

2012-01-01

We describe our 3-D, time ]dependent, MHD solar wind model that we recently modified to include the physics of pickup protons from interstellar neutral hydrogen. The model has a time-dependent lower boundary condition, at 0.1 AU, that is driven by source surface map files through an empirical interface module. We describe the empirical interface and its parameter tuning to maximize model agreement with background (quiet) solar wind observations at ACE. We then give results of a simulation study of the famous Halloween 2003 series of solar events. We began with shock inputs from the Fearless Forecast real ]time shock arrival prediction study, and then we iteratively adjusted input shock speeds to obtain agreement between observed and simulated shock arrival times at ACE. We then extended the model grid to 5.5 AU and compared those simulation results with Ulysses observations at 5.2 AU. Next we undertook the more difficult tuning of shock speeds and locations to get matching shock arrival times at both ACE and Ulysses. Then we ran this last case again with neutral hydrogen density set to zero, to identify the effect of pickup ions. We show that the speed of interplanetary shocks propagating from the Sun to Ulysses is reduced by the effects of pickup protons. We plan to make further improvements to the model as we continue our benchmarking process to 10 AU, comparing our results with Cassini observations, and eventually on to 100 AU, comparing our results with Voyager 1 and 2 observations.

A remote control neutron cone scanner and measurement of the d(T,n) α neutron cone

International Nuclear Information System (INIS)

Suwanakachorn, D.; Vilaithong, T.; Vilaithong, C.; Boonyawan, D.; Chimooy, T.; Sornphorm, P.; Hoyce, G.; Pairsuwan, W.; Singkarat, S.

1988-01-01

We have measured the neutron cone associated with alpha particles from the d(T,n)α reaction by using a remote-control cone scanner. This scanner has two principal parts. The first part is the neutron detector scanner which can move the detector in the horizontal and vertical axis using to stepping-motors. The neutron detector can be moved in 0.5 cm increments over the whole rage of 30 cm. The second part is the remote-control electronic circuit using digital ICs. The rotation of stepping-motors is controlled by pulse signals from this circuit and the position of the detector is known by counting the number of pulses. The position of the neutron detector is indicated directly on a 3 digit display at the control panel. The method of measuring the neutron cone by the Time-of-Flight technique is also described

Utilization of a pulsed D-T neutron generator

International Nuclear Information System (INIS)

Vilaithong, T.; Singkarat, S.; Tippawan, U.

2000-01-01

In the past two decades the IAEA has supported the establishment of neutron laboratories in many developing countries by providing small D-T neutron generators. The neutron generator is basically a low energy (100-400 keV) ion accelerator capable of producing a continuous beam of deuterons with a current in the range between 1-2.5 mA. These neutron generators are primarily intended to be used for fast neutron activation analysis. This paper describes the utilization of a 14 MeV neutron generator in continuous and pulsed beam modes in applied neutron physics program at Chiang Mai University. (author)

Association of Angiotensin-Converting Enzyme (ACE Gene Polymorphism with Inflammation and Cellular Cytotoxicity in Vitiligo Patients.

Directory of Open Access Journals (Sweden)

Laila Rashed

Full Text Available Vitiligo is a disorder with profound heterogeneity in its aetio-pathophysiology. Angiotensin converting enzyme (ACE plays an important role in the physiology of the vasculature, blood pressure and inflammation. An insertion/deletion (I/D polymorphism of the ACE gene was reported be associated with the development of vitiligo.Our aim was to evaluate the ACE I/D polymorphism in vitiligo patients and controls. Our second aim was to find a possible association between ACE gene polymorphism and inflammatory mediators (as interleukin (IL-6 and/or cellular cytotoxicity induced by serum nitrite (as a breakdown product of the cytotoxic nitric oxide in vitiligo patients.This case-control study included 74 vitiligo patients and 75 apparently healthy controls. The distribution of ACE gene I/D genotype was investigated using PCR. Serum ACE, IL-6 and nitrite were measured by colorimetric method, ELISA and Griess assay respectively.The ACE allele frequency was significantly different between vitiligo patients and healthy controls (P = 0.026. However there was no significant difference between the ACE genotyping frequency in both groups (P = 0.115. There were statistically significant higher VIDA score (P = 0.007, and serum IL-6 (P < 0.001 in patients with the DD genotype when compared to other genotypes. Serum nitrite in patients with the DD genotype was significantly higher (P = 0.007 when compared to patients with II genotype. Serum levels of ACE, IL-6 and nitrite in vitiligo patients were statistically significantly higher than those in controls.As a conclusion, ACE gene polymorphism might grant susceptibility to develop vitiligo. Serum IL-6 and nitrite levels might have an important role in the pathogenesis of vitiligo. Targeting these two factors might have an implication in the treatment of some resistant cases.

Lactoferricin-related peptides with inhibitory effects on ACE-dependent vasoconstriction.

Science.gov (United States)

Centeno, José M; Burguete, María C; Castelló-Ruiz, María; Enrique, María; Vallés, Salvador; Salom, Juan B; Torregrosa, Germán; Marcos, José F; Alborch, Enrique; Manzanares, Paloma

2006-07-26

A selection of lactoferricin B (LfcinB)-related peptides with an angiotensin I-converting enzyme (ACE) inhibitory effect have been examined using in vitro and ex vivo functional assays. Peptides that were analyzed included a set of sequence-related antimicrobial hexapeptides previously reported and two representative LfcinB-derived peptides. In vitro assays using hippuryl-L-histidyl-L-leucine (HHL) and angiotensin I as substrates allowed us to select two hexapeptides, PACEI32 (Ac-RKWHFW-NH2) and PACEI34 (Ac-RKWLFW-NH2), and also a LfcinB-derived peptide, LfcinB17-31 (Ac-FKCRRWQWRMKKLGA-NH2). Ex vivo functional assays using rabbit carotid arterial segments showed PACEI32 (both D- and L-enantiomers) and LfcinB17-31 have inhibitory effects on ACE-dependent angiotensin I-induced contraction. None of the peptides exhibited in vitro ACE inhibitory activity using bradykinin as the substrate. In conclusion, three bioactive lactoferricin-related peptides exhibit inhibitory effects on both ACE activity and ACE-dependent vasoconstriction with potential to modulate hypertension that deserves further investigation.

Extension of the reactor dynamics code MGT-3D for pebblebed and blocktype high-temperature-reactors

International Nuclear Information System (INIS)

Shi, Dunfu

2015-01-01

The High Temperature Gas cooled Reactor (HTGR) is an improved, gas cooled nuclear reactor. It was chosen as one of the candidates of generation IV nuclear plants [1]. The reactor can be shut down automatically because of the negative reactivity feedback due to the temperature's increasing in designed accidents. It is graphite moderated and Helium cooled. The residual heat can be transferred out of the reactor core by inactive ways as conduction, convection, and thermal radiation during the accident. In such a way, a fuel temperature does not go beyond a limit at which major fission product release begins. In this thesis, the coupled neutronics and fluid mechanics code MGT-3D used for the steady state and time-dependent simulation of HTGRs, is enhanced and validated [2]. The fluid mechanics part is validated by SANA experiments in steady state cases as well as transient cases. The fuel temperature calculation is optimized by solving the heat conduction equation of the coated particles. It is applied in the steady state and transient simulation of PBMR, and the results are compared to the simulation with the old overheating model. New approaches to calculate the temperature profile of the fuel element of block-type HTGRs, and the calculation of the homogeneous conductivity of composite materials are introduced. With these new developments, MGT-3D is able to simulate block-type HTGRs as well. This extended MGT-3D is used to simulate a cuboid ceramic block heating experiment in the NACOK-II facility. The extended MGT-3D is also applied to LOFC and DLOFC simulation of GT-MHR. It is a fluid mechanics calculation with a given heat source. This calculation result of MGT-3D is verified with the calculation results of other codes. The design of the Japanese HTTR is introduced. The deterministic simulation of the LOFC experiment of HTTR is conducted with the Monte-Carlo code Serpent and MGT-3D, which is the LOFC Project organized by OECD/NEA [3]. With Serpent the burnup

Neutronic and thermal estimation of blanket in-pile mockup with Li2TiO3 pebbles

International Nuclear Information System (INIS)

Nagao, Y.; Nakamichi, M.; Tsuchiya, K.; Kawamura, H.

2001-01-01

To evaluate exactly temperature distribution in large volume of tritium breeding materials during the blanket in-pile tests with the JMTR, neutronic and thermal calculations were conducted by using Monte Carlo code 'MCNP' with nuclear cross section library of 'FSXLIBJ3R2' and the transient and steady-state distribution code 'TRUMP'. From the results of preliminary estimation of temperature distribution in the blanket in-pile mockup, the calculated values were 24-28% higher than the measured values. One of the reasons is due to overestimation of calculated thermal neutron flux

DD genotype of ACE gene in boys: may it be a risk factor for minimal change nephrotic syndrome?

Science.gov (United States)

Alasehirli, Belgin; Balat, Ayşe; Büyükçelik, Mithat

2012-01-01

It has been shown that angiotensin-converting enzyme (ACE) gene insertion/deletion (I/D) polymorphism affects the circulating and cellular levels of ACE and may be a risk factor in several renal diseases. We analyzed the association of ACE gene I/D polymorphism with the clinical presentation of minimal change nephrotic syndrome (MCNS) in a Turkish child population. This study consisted of 97 children with MCNS and 144 healthy controls. Genotyping of ACE gene was performed using polymerase chain reaction (PCR). The distributions of ACE genotypes were II in 13%, ID in 49%, and DD in 38% in patient group, and 9%, 49%, and 42% in control group, respectively. The frequency of the D allele was 63% and that of the I allele was 37% in patients. There were no relevant differences in the allele frequencies and genotypes of ACE I/D polymorphism between patients and controls. However, DD genotype was higher in boys in children with MCNS (78.4%. vs. 50.0%, p = 0.004). The frequencies of DD genotype and D allele in boys were 7.25 and 2.56 times higher than II genotype and I allele in the patient group, respectively. We suggest that DD genotype in boys may be one of the risk factors for MCNS.

Measurement of radiation skyshine with D-T neutron source

Energy Technology Data Exchange (ETDEWEB)

Yoshida, S.; Nishitani, T. E-mail: nisitani@naka.jaeri.go.jp; Ochiai, K.; Kaneko, J.; Hori, J.; Sato, S.; Yamauchi, M.; Tanaka, R.; Nakao, M.; Wada, M.; Wakisaka, M.; Murata, I.; Kutsukake, C.; Tanaka, S.; Sawamura, T.; Takahashi, A

2003-09-01

The D-T neutron skyshine experiments have been carried out at the Fusion Neutronics Source (FNS) of JAERI with the neutron yield of {approx}1.7x10{sup 11} n/s. The concrete thickness of the roof and the wall of a FNS target room are 1.15 and 2 m, respectively. The FNS skyshine port with a size of 0.9x0.9 m{sup 2} was open during the experimental period. The radiation dose rate outside the target room was measured a maximum distance of 550 m from the D-T target point with a spherical rem-counter. Secondary gamma-rays were measured with high purity Ge detectors and NaI scintillation counters. The highest neutron dose was about 9x10{sup -22} Sv/(source neutron) at a distance of 30 m from the D-T target point and the dose rate was attenuated to 4x10{sup -24} Sv/(source neutron) at a distance of 550 m. The measured neutron dose distribution was analyzed with Monte Carlo code MCNP-4B and a simple line source model. The MCNP calculation overestimates the neutron dose in the distance range larger than 230 m. The line source model agrees well with the experimental results within the distance of 350 m.

A High Intensity Multi-Purpose D-D Neutron Generator for Nuclear Engineering Laboratories

International Nuclear Information System (INIS)

Ka-Ngo Leung; Jasmina L. Vujic; Edward C. Morse; Per F. Peterson

2005-01-01

This NEER project involves the design, construction and testing of a low-cost high intensity D-D neutron generator for teaching nuclear engineering students in a laboratory environment without radioisotopes or a nuclear reactor. The neutron generator was designed, fabricated and tested at Lawrence Berkeley National Laboratory (LBNL)

Prevalence of angiotensin converting enzyme (ACE) gene insertion/deletion polymorphism in South Indian population with hypertension and chronic kidney disease.

Science.gov (United States)

Shanmuganathan, R; Kumaresan, R; Giri, P

2015-01-01

Chronic Kidney Disease (CKD) is associated with a high risk of developing further severe complications such as, cardiovascular disease and eventually End Stage Renal Disease (ESRD) leading to death. Hypertension plays a key role in the progression of renal failure and is also a chief risk factor for the occurrence of End Stage Renal Disease (ESRD). This study investigates the possible association of insertion (I) and deletion (D) polymorphism of ACE gene in patients of Chronic Kidney Disease (CKD) with and without hypertension (HT). Total 120 participants with 30 members in each group (Control, HT, CKD and CKD-HT) were chosen followed by informed consent. Blood samples were collected and subjected to biochemical analyses and nested PCR amplification was performed to genotype the DNA, for ACE I/D using specific primers. Statistical analyses were performed using SPSS version 13. Allele and genotypic frequency was calculated by direct gene counting method. Comparison of the different genotypes was done by using Chi square test. Odd's ratios were calculated with a 95% confidence interval limit. The ACE genotype were distributed as II, 27 (90%); DD, 2 (6.67%) and ID, 1 (3.33%) in control, II, 1 (3.33%); DD, 5 (16.67%) and ID, 24 (80%) in HT, II, 4 (13.33%); DD, 24 (80%) and ID, 2 (6.67%) in CKD and II, 0 (0%); DD, 2 (6.67%) and ID, 28 (93.33%) in CKD-HT group. D allele of ACE gene confers a greater role in genetic variations underlying CKD and hypertension. This result suggest that CKD patients should be offered analysis for defects in ACE I/D polymorphisms, especially if they are hypertensive.

MTHFR Gene C677T Mutation and ACE Gene I/D Polymorphism in Turkish Patients with Osteoarthritis

Directory of Open Access Journals (Sweden)

Ahmet Inanir

2013-01-01

Full Text Available Osteoarthritis is a degenerative joint disorder resulting in destruction of articular cartilage, osteophyte formation, and subchondral bone sclerosis. In recent years, numerous genetic factors have been identified and implicated in osteoarthritis. The aim of the current study was to examine the influence of methylenetetrahydrofolate reductase (MTHFR gene C677T mutation and angiotensin converting enzyme (ACE gene insertion/deletion (I/D variations on the risk of osteoarthritis.

Preface ACE 2013

NARCIS (Netherlands)

Katayose, Haruhiro; Reidsma, Dennis; Katayose, Haruhiro; Nijholt, Antinus

2013-01-01

These are the proceedings of the 10th International Conference on Advances in Computer Entertainment (ACE 2013), hosted by the Human Media Interaction research group of the Centre for Telematics and Information Technology at the University of Twente, The Netherlands. The ACE series of conferences,

Steady-state thermal-hydraulic design analysis of the Advanced Neutron Source reactor

International Nuclear Information System (INIS)

Yoder, G.L. Jr.; Dixon, J.R.; Elkassabgi, Y.; Felde, D.K.; Giles, G.E.; Harrington, R.M.; Morris, D.G.; Nelson, W.R.; Ruggles, A.E.; Siman-Tov, M.; Stovall, T.K.

1994-05-01

The Advanced Neutron Source (ANS) is a research reactor that is planned for construction at Oak Ridge National Laboratory. This reactor will be a user facility with the major objective of providing the highest continuous neutron beam intensities of any reactor in the world. Additional objectives for the facility include providing materials irradiation facilities and isotope production facilities as good as, or better than, those in the High Flux Isotope Reactor. To achieve these objectives, the reactor design uses highly subcooled heavy water as both coolant and moderator. Two separate core halves of 67.6-L total volume operate at an average power density of 4.5 MW(t)/L, and the coolant flows upward through the core at 25 m/s. Operating pressure is 3.1 MPa at the core inlet with a 1.4-MPa pressure drop through the core region. Finally, in order to make the resources available for experimentation, the fuel is designed to provide a 17-d fuel cycle with an additional 4 d planned in each cycle for the refueling process. This report examines the codes and models used to develop the thermal-hydraulic design for ANS, as well as the correlations and physical data; evaluates thermal-hydraulic uncertainties; reports on thermal-hydraulic design and safety analysis; describes experimentation in support of the ANS reactor design and safety analysis; and provides an overview of the experimental plan

Estimate of the damage in organs induced by neutrons in three-dimensional conformal radiotherapy; Estimacion del dano en organos inducido por neutrones en radioterapia conformada en 3D

Energy Technology Data Exchange (ETDEWEB)

Benites R, J. L. [Centro Estatal de Cancerologia de Nayarit, Servicio de Seguridad Radiologica, Calzada de la Cruz 118 sur, 63000 Tepic, Nayarit (Mexico); Vega C, H. R. [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas (Mexico); Uribe, M. del R., E-mail: jlbenitesr@prodigy.net.mx [Instituto Tecnico Superior de Radiologia, Calle Leon No. 129, 63000 Tepic, Nayarit (Mexico)

2014-08-15

By means of Monte Carlo methods was considered the damage in the organs, induced by neutrons, of patients with cancer that receive treatment in modality of three-dimensional conformal radiotherapy (3D-CRT) with lineal accelerator Varian Ix. The objective of this work was to estimate the damage probability in radiotherapy patients, starting from the effective dose by neutrons in the organs and tissues out of the treatment region. For that a three-dimensional mannequin of equivalent tissue of 30 x 100 x 30 cm{sup 3} was modeled and spherical cells were distributed to estimate the Kerma in equivalent tissue and the absorbed dose by neutrons. With the absorbed dose the effective dose was calculated using the weighting factors for the organ type and radiation type. With the effective dose and the damage factors, considered in the ICRP 103, was considered the probability of damage induction in organs. (Author)

An ace-1 gene duplication resorbs the fitness cost associated with resistance in Anopheles gambiae, the main malaria mosquito.

Science.gov (United States)

Assogba, Benoît S; Djogbénou, Luc S; Milesi, Pascal; Berthomieu, Arnaud; Perez, Julie; Ayala, Diego; Chandre, Fabrice; Makoutodé, Michel; Labbé, Pierrick; Weill, Mylène

2015-10-05

Widespread resistance to pyrethroids threatens malaria control in Africa. Consequently, several countries switched to carbamates and organophophates insecticides for indoor residual spraying. However, a mutation in the ace-1 gene conferring resistance to these compounds (ace-1(R) allele), is already present. Furthermore, a duplicated allele (ace-1(D)) recently appeared; characterizing its selective advantage is mandatory to evaluate the threat. Our data revealed that a unique duplication event, pairing a susceptible and a resistant copy of the ace-1 gene spread through West Africa. Further investigations revealed that, while ace-1(D) confers less resistance than ace-1(R), the high fitness cost associated with ace-1(R) is almost completely suppressed by the duplication for all traits studied. ace-1 duplication thus represents a permanent heterozygote phenotype, selected, and thus spreading, due to the mosaic nature of mosquito control. It provides malaria mosquito with a new evolutionary path that could hamper resistance management.

High prevalence of ACE DD genotype among north Indian end stage renal disease patients

Directory of Open Access Journals (Sweden)

Pandirikkal Baburajan Vinod

2006-10-01

Full Text Available Abstract Background The Renin-Angiotensin system (RAS is a key regulator of both blood pressure and kidney functions and their interaction. In such a situation, genetic variability in the genes of different components of RAS is likely to contribute for its heterogeneous association in the renal disease patients. Angiotensin converting enzyme-1 (ACE-1 is an important component of RAS which determines the vasoactive peptide Angiotensin-II. Methods In the present study, we have investigated 127 ESRD patients and 150 normal healthy controls from north India to deduce the association between ACE gene polymorphism and ESRD. The inclusion criteria for patients included a constantly elevated serum creatinine level above normal range (ranging from 3.4 to 15.8 and further the patients were recommended for renal transplantation. A total of 150 normal healthy controls were also genotyped for ACE I/D polymorphism. The criterion of defining control sample as normal was totally based on the absence of any kidney disease determined from the serum creatinin level. Genotyping of ACE I/D were assayed by polymerase chain reaction (PCR based DNA amplification using specific flanking primers Based on the method described elsewhere. Results The difference of DD and II genotypes was found highly significant among the two groups (p = 0.025; OR = 3.524; 95%CI = 1.54-8.07. The combined genotype DD v/s ID+II comparison validated that DD genotype is a high risk genotype for ESRD (p = 0.001; OR = 5.74; 95%CI limit = 3.4-8.5. However, no correlation was obtained for different biochemical parameters of lipid profile and renal function among DD and non DD genotype. Interestingly, ~87% of the DD ESRD patients were found hypertensive in comparison to the 65% patients of non DD genotype Conclusion Based on these observations we conclude that ACE DD genotype implicate a strong possible role in the hypertensive state and in renal damage among north Indians. The study will help in

Three-dimensional neutron kinetics-thermal-hydraulics VVER 1000 main steam line break analysis by RELAP5-3D code

International Nuclear Information System (INIS)

Frisani, A.; Parisi, C.; D'Auria, F.

2007-01-01

After the development and the assessment of Three-Dimensional (3D) Neutron Kinetics (NK) - 1D Thermal-Hydraulics (TH) coupled codes analyses methods, deterministic nuclear safety technology is nowadays producing noticeable efforts for the validation of 3D NK - 3D TH coupled codes analyses methods too. Thus, the purpose of this work was to address the capability of the RELAP5-3D 3D NK-3D TH code to reproduce VVER 1000 Nuclear Power Plant (NPP) core dynamic in simulating the mixing effects that could happen in the vessel downcomer and lower plenum during some scenarios. The work was developed in three steps. The first step dealt with the 3D TH modeling of the Kozloduy-6 VVER 1000 reactor pressure vessel. Then this model was validated following a Steam Generator Isolation transient. The second step has been the development of a 3D NK nodalization for the reactor core region. Then the 3D NK model was directly coupled with the previously developed 3D TH model. The third step was the calculation of a Main Steam Line Break (MSLB) transient. The 3D NK global nuclear parameters were then compared with the 0-D results showing a good agreement; nevertheless only the 3D NK- 3D TH model allowed the calculation of each single assembly power trend for this strong NK-TH asymmetric transient. (author)

Measurement of leakage neutron spectra for Tungsten with D-T neutrons and validation of evaluated nuclear data

International Nuclear Information System (INIS)

Zhang, S.; Chen, Z.; Nie, Y.; Wada, R.; Ruan, X.; Han, R.; Liu, X.; Lin, W.; Liu, J.; Shi, F.; Ren, P.; Tian, G.; Luo, F.; Ren, J.; Bao, J.

2015-01-01

Highlights: • Evaluated data for Tungsten are validated by integral experiment. • Leakage neutron spectra from the irradiation of D-T neutrons on Tungsten are measured at 60° and 120° by using a time-of-flight method. • The measured results are compared to the MCNP-4C calculated ones with evaluated data of the different libraries. - Abstract: Integral neutronics experiments have been investigated at Institute of Modern Physics, Chinese Academy of Sciences (IMP, CAS) in order to validate evaluated nuclear data related to the design of Chinese Initiative Accelerator Driven Systems (CIADS). In the present paper, the accuracy of evaluated nuclear data for Tungsten has been examined by comparing measured leakage neutron spectra with calculated ones. Leakage neutron spectra from the irradiation of D-T neutrons on Tungsten slab sample were experimentally measured at 60° and 120° by using a time-of-flight method. Theoretical calculations are carried out by Monte Carlo neutron transport code MCNP-4C with evaluated nuclear data of the ADS-2.0, ENDF/B-VII.0, ENDF/B-VII.1, JENDL-4.0 and CENDL-3.1 libraries. From the comparisons, it is found that the calculations with ADS-2.0 and ENDF/B-VII.1 give good agreements with the experiments in the whole energy regions at 60°, while a large discrepancy is observed at 120° in the elastic scattering peak, caused by a slight difference in the oscillation pattern of the elastic angular distribution at angles larger than 20°. However, the calculated spectra using data from ENDF/B-VII.0, JENDL-4.0 and CENDL-3.1 libraries showed larger discrepancies with the measured ones, especially around 8.5–13.5 MeV. Further studies are presented for these disagreements

Association of eNOS and ACE gene polymorphisms and plasma nitric oxide with risk of non-small cell lung cancer in South India.

Science.gov (United States)

Peddireddy, Vidyullatha; Badabagni, Siva Prasad; Gundimeda, Sandhya Devi; Mundluru, Hema Prasad

2018-01-01

The role of ACE and eNOS gene polymorphisms and their association with various cancers were reported. However, their role in the lung cancer is unclear. In this study, we analyzed eNOS and ACE gene polymorphisms and the risk of non-small cell lung cancer (NSCLC) in South Indian population. For the eNOS gene, the homozygous "AA" genotypic frequency was significantly associated with NSCLC with an overall risk of 3.6-fold (P = 0.006, odds ratio = 3.58, 95% confidence interval = 1.66, 7.723). The heterozygous "I/D" genotypic frequency of ACE gene was significantly higher in NSCLC patients when compared to the controls with a 2.29-fold risk for NSCLC. Multiple regression analyses indicated that gender, smoking status, and polymorphisms in eNOS and ACE genes as the strongest predicting factors for an increased susceptibility to NSCLC. We report for the first time that polymorphisms in the eNOS "A/A" (homozygous mutant) and ACE "I/D" genotypes might contribute to the increased risk of NSCLC in the South Indian population. © 2016 John Wiley & Sons Ltd.

A preliminary perusal of ACE I/D polymorphism with adiposity traits and blood pressure among the AO NAGAS: Does gender-dependent gene expression matter?

Directory of Open Access Journals (Sweden)

Imkongtenla Pongen

2016-12-01

Full Text Available This study aims to evaluate the association of gender-dependent expression of angiotensin converting enzyme gene polymorphism (I/D with adiposity markers and blood pressure among AoNagas.57AoNagas[Males (n =26; Females (n = 31; Mean Age: 30.56±7.5 and 31.9 ±8.3 1]residing in Delhi were included in this cross sectionalstudy. Anthropometric measurements and blood pressure were taken using standardized techniques. Adiposity indices viz., BMI, WHR and WHtR were computed. Body fat percentage was assessed by bioelectricimpedance technique using Tanita Body composition analyzer (T-6360. Venous blood samples were withdrawn for DNA extraction and genotyping of ACE gene (I/D polymorphism was established by polymerase chain reaction (PCR. In female participants with DD homozygote, risk of both general and central obesity as depicted by BMI, body fat percentage, WC, WHR and WHtR were higher than ID heterozygote. Risk of hypertension was found to be greater among males with DD homozygote rather than females with DD homozygote. In males, obesity was not found to be associated with hypertension in either DD or ID genotypic variants of ACE. Whereas, in females obesity was significantly and positively correlated with hypertension in both DD and ID genotype. DD homozygous form of ACE is linked with both obesity and blood pressure in females and only with blood pressure in males. This genotype-by-gender interaction gives us a facet in understanding the complex genetic basis of adiposity and blood pressure phenotypes.

Neutron emission in neutral beam heated KSTAR plasmas and its application to neutron radiography

Energy Technology Data Exchange (ETDEWEB)

Kwak, Jong-Gu, E-mail: jgkwak@nfri.re.kr; Kim, H.S.; Cheon, M.S.; Oh, S.T.; Lee, Y.S.; Terzolo, L.

2016-11-01

Highlights: • We measured the neutron emission from KSTAR plasmas quantitatively. • We confirmed that neutron emission is coming from neutral beam-plasma interactions. • The feasibility study shows that the fast neutron from KSTAR could be used for fast neutron radiography. - Abstract: The main mission of Korea Superconducting Tokamak Advanced Research (KSTAR) program is exploring the physics and technologies of high performance steady state Tokamak operation that are essential for ITER and fusion reactor. Since the successful first operation in 2008, the plasma performance is enhanced and duration of H-mode is extended to around 50 s which corresponds to a few times of current diffusion time and surpassing the current conventional Tokamak operation. In addition to long-pulse operation, the operational boundary of the H-mode discharge is further extended over MHD no-wall limit(β{sub N} ∼ 4) transiently and higher stored energy region is obtained by increased total heating power (∼6 MW) and plasma current (I{sub p} up to 1 MA for ∼10 s). Heating system consists of various mixtures (NB, ECH, LHCD, ICRF) but the major horse heating resource is the neutral beam(NB) of 100 keV with 4.5 MW and most of experiments are conducted with NB. So there is a lot of production of fast neutrons coming from via D(d,n){sup 3}He reaction and it is found that most of neutrons are coming from deuterium beam plasma interaction. Nominal neutron yield and the area of beam port is about 10{sup 13}–10{sup 14}/s and 1 m{sup 2} at the closest access position of the sample respectively and neutron emission could be modulated for application to the neutron radiography by varying NB power. This work reports on the results of quantitative analysis of neutron emission measurements and results are discussed in terms of beam-plasma interaction and plasma confinement. It also includes the feasibility study of neutron radiography using KSTAR.

Interaction of angiotensin-converting enzyme (ACE) with membrane-bound carboxypeptidase M (CPM) - a new function of ACE.

Science.gov (United States)

Sun, Xiaoou; Wiesner, Burkhard; Lorenz, Dorothea; Papsdorf, Gisela; Pankow, Kristin; Wang, Po; Dietrich, Nils; Siems, Wolf-Eberhard; Maul, Björn

2008-12-01

Angiotensin-converting enzyme (ACE) demonstrates, besides its typical dipeptidyl-carboxypeptidase activity, several unusual functions. Here, we demonstrate with molecular, biochemical, and cellular techniques that the somatic wild-type murine ACE (mACE), stably transfected in Chinese Hamster Ovary (CHO) or Madin-Darby Canine Kidney (MDCK) cells, interacts with endogenous membranal co-localized carboxypeptidase M (CPM). CPM belongs to the group of glycosylphosphatidylinositol (GPI)-anchored proteins. Here we report that ACE, completely independent of its known dipeptidase activities, has GPI-targeted properties. Our results indicate that the spatial proximity between mACE and the endogenous CPM enables an ACE-evoked release of CPM. These results are discussed with respect to the recently proposed GPI-ase activity and function of sperm-bound ACE.

Nitrogen Detection in Bulk Samples Using a D-D Reaction-Based Portable Neutron Generator

Directory of Open Access Journals (Sweden)

A. A. Naqvi

2013-01-01

Full Text Available Nitrogen concentration was measured via 2.52 MeV nitrogen gamma ray from melamine, caffeine, urea, and disperse orange bulk samples using a newly designed D-D portable neutron generator-based prompt gamma ray setup. Inspite of low flux of thermal neutrons produced by D-D reaction-based portable neutron generator and interference of 2.52 MeV gamma rays from nitrogen in bulk samples with 2.50 MeV gamma ray from bismuth in BGO detector material, an excellent agreement between the experimental and calculated yields of nitrogen gamma rays indicates satisfactory performance of the setup for detection of nitrogen in bulk samples.

Silencing of HaAce1 gene by host-delivered artificial microRNA disrupts growth and development of Helicoverpa armigera.

Science.gov (United States)

Saini, Ravi Prakash; Raman, Venkat; Dhandapani, Gurusamy; Malhotra, Era Vaidya; Sreevathsa, Rohini; Kumar, Polumetla Ananda; Sharma, Tilak R; Pattanayak, Debasis

2018-01-01

The polyphagous insect-pest, Helicoverpa armigera, is a serious threat to a number of economically important crops. Chemical application and/or cultivation of Bt transgenic crops are the two strategies available now for insect-pest management. However, environmental pollution and long-term sustainability are major concerns against these two options. RNAi is now considered as a promising technology to complement Bt to tackle insect-pests menace. In this study, we report host-delivered silencing of HaAce1 gene, encoding the predominant isoform of H. armigera acetylcholinesterase, by an artificial microRNA, HaAce1-amiR1. Arabidopsis pre-miRNA164b was modified by replacing miR164b/miR164b* sequences with HaAce1-amiR1/HaAce1-amiR1* sequences. The recombinant HaAce1-preamiRNA1 was put under the control of CaMV 35S promoter and NOS terminator of plant binary vector pBI121, and the resultant vector cassette was used for tobacco transformation. Two transgenic tobacco lines expressing HaAce1-amiR1 was used for detached leaf insect feeding bioassays. Larval mortality of 25% and adult deformity of 20% were observed in transgenic treated insect group over that control tobacco treated insect group. The reduction in the steady-state level of HaAce1 mRNA was 70-80% in the defective adults compared to control. Our results demonstrate promise for host-delivered amiRNA-mediated silencing of HaAce1 gene for H. armigera management.

Make a 2D RPG in a weekend with RPG maker VX Ace

CERN Document Server

Perez, Darrin

2015-01-01

Make a 2D RPG in a Weekend shows you how to create your very own dungeon crawler game in RPG Maker VX Ace in a single weekend. The entire process, from start to finish, is covered within this book. You will see a variety of dungeon maps and events, all broken down for your convenience. One of the hardest parts of game development is actually finishing a game, but it is also one of the most important steps on the way to becoming a game developer. If you have yet to finish a game, this book will give you the confidence and resources you need to finally be able to create your very own RPG. Once

Burn-up dependent steady-state thermal hydraulic analysis of Pakistan research reactor-1

Directory of Open Access Journals (Sweden)

Muhammad Atta

2011-01-01

Full Text Available The burn-up dependent steady-state thermal hydraulic analysis of Pakistan research reactor-1, reference operating core, has been carried out utilizing standard computer codes WIMS/D4, CITATION, and RELAP5/MOD3.4. Reactor codes WIMS/D4 and CITATION have been used for the calculations of neutronic parameters including peaking factors and power profiles at different burn-up considering a xenon free core and also the equilibrium xenon values. RELAP5/MOD3.4 code was utilized for the determination of peak fuel centerline, clad and coolant temperatures to ensure the safety of the reactor throughout the cycle. The calculations reveal that the reactor is safe and no nucleate boiling will commence at any part of the core throughout the cycle and that the safety margin increases with burnup as peaking factors decrease.

VHTR core modeling: coupling between neutronic and thermal-hydraulics

International Nuclear Information System (INIS)

Limaiem, I.; Damian, F.; Raepsaet, X.; Studer, E.

2005-01-01

Following the present interest in the next generation nuclear power plan (NGNP), Cea is deploying special effort to develop new models and qualify its research tools for this next generation reactors core. In this framework, the Very High Temperature Reactor concept (VHTR) has an increasing place in the actual research program. In such type of core, a strong interaction exists between neutronic and thermal-hydraulics. Consequently, the global core modelling requires accounting for the temperature feedback in the neutronic models. The purpose of this paper is to present the new neutronic and thermal-hydraulics coupling model dedicated to the High Temperature Reactors (HTR). The coupling model integrates a new version of the neutronic scheme calculation developed in collaboration between Cea and Framatome-ANP. The neutronic calculations are performed using a specific calculation processes based on the APOLLO2 transport code and CRONOS2 diffusion code which are part of the French reactor physics code system SAPHYR. The thermal-hydraulics model is characterised by an equivalent porous media and 1-D fluid/3-D thermal model implemented in the CAST3M/ARCTURUS code. The porous media approach involves the definition of both homogenous and heterogeneous models to ensure a correct temperature feedback. This study highlights the sensitivity of the coupling system's parameters (radial/axial meshing and data exchange strategy between neutronic and thermal-hydraulics code). The parameters sensitivity study leads to the definition of an optimal coupling system specification for the VHTR. Besides, this work presents the first physical analysis of the VHTR core in steady-state condition. The analysis gives information about the 3-D power peaking and the temperature coefficient. Indeed, it covers different core configurations with different helium distribution in the core bypass. (authors)

A fission-fusion hybrid reactor in steady-state L-mode tokamak configuration with natural uranium

International Nuclear Information System (INIS)

Reed, Mark; Parker, Ronald R.; Forget, Benoit

2012-01-01

This work develops a conceptual design for a fusion-fission hybrid reactor operating in steady-state L-mode tokamak configuration with a subcritical natural or depleted uranium pebble bed blanket. A liquid lithium-lead alloy breeds enough tritium to replenish that consumed by the D-T fusion reaction. The fission blanket augments the fusion power such that the fusion core itself need not have a high power gain, thus allowing for fully non-inductive (steady-state) low confinement mode (L-mode) operation at relatively small physical dimensions. A neutron transport Monte Carlo code models the natural uranium fission blanket. Maximizing the fission power gain while breeding sufficient tritium allows for the selection of an optimal set of blanket parameters, which yields a maximum prudent fission power gain of approximately 7. A 0-D tokamak model suffices to analyze approximate tokamak operating conditions. This fission blanket would allow the fusion component of a hybrid reactor with the same dimensions as ITER to operate in steady-state L-mode very comfortably with a fusion power gain of 6.7 and a thermal fusion power of 2.1 GW. Taking this further can determine the approximate minimum scale for a steady-state L-mode tokamak hybrid reactor, which is a major radius of 5.2 m and an aspect ratio of 2.8. This minimum scale device operates barely within the steady-state L-mode realm with a thermal fusion power of 1.7 GW. Basic thermal hydraulic analysis demonstrates that pressurized helium could cool the pebble bed fission blanket with a flow rate below 10 m/s. The Brayton cycle thermal efficiency is 41%. This reactor, dubbed the Steady-state L-mode non-Enriched Uranium Tokamak Hybrid (SLEUTH), with its very fast neutron spectrum, could be superior to pure fission reactors in terms of breeding fissile fuel and transmuting deleterious fission products. It would likely function best as a prolific plutonium breeder, and the plutonium it produces could actually be more

VSOP, Neutron Spectra, 2-D Flux Synthesis, Fuel Management, Thermohydraulics Calculation

International Nuclear Information System (INIS)

Teuchert, E.; Haas, K.A.

1995-01-01

1 - Description of problem or function: VSOP (Very Superior Old Programs) is a system of codes linked together for the simulation of reactor life histories. It comprises neutron cross section libraries and processing routines, repeated neutron spectrum evaluation, 2-D and 3-D diffusion calculation, depletion and shut-down features, in- core and out-of-pile fuel management, fuel cycle cost analysis, and thermal hydraulics (steady state and transient). Various techniques have been employed to accelerate the iterative processes and to optimize the internal data transfer. The code system has been used extensively for comparison studies of thermal reactors, their fuel cycles, thermal transients, and safety assessment. Besides its use in research and development work for the Gas Cooled High Temperature Reactor, the system has been applied successfully to Light Water and Heavy Water Reactors, MAGNOX, and RBMK. 2 - Method of solution: The nuclear data for 184 isotopes are contained in two libraries. Fast and epithermal data in a 68 group GAM-I structure have been prepared mainly from ENDF/B-V and JEF-1. Resonance cross section data are given as input. Thermal data in a 30 group THERMOS structure have been collapsed from a 96 group THERMALIZATION (GATHER) library by a relevant neutron energy spectrum generated by the THERMALIZATION code. Graphite scattering matrices are based on the Young phonon spectrum in graphite. The neutron spectrum is calculated by a combination of the GAM and THERMOS codes. They can simultaneously be employed for many core regions differing in temperature, burnup, and fuel element lay-out. The thermal cell code THERMOS has been extended to treat the grain structure of the coated particles inside the fuel elements, and the epithermal GAM code uses modified cross sections for the resonance absorbers prepared from double heterogeneous ZUT-DGL calculations. The diffusion module of the code is CITATION with 2 - 8 energy groups. It provides the neutron

On an analytical evaluation of the flux and dominant eigenvalue problem for the steady state multi-group multi-layer neutron diffusion equation

Energy Technology Data Exchange (ETDEWEB)

Ceolin, Celina; Schramm, Marcelo; Bodmann, Bardo Ernst Josef; Vilhena, Marco Tullio Mena Barreto de [Universidade Federal do Rio Grande do Sul, Porto Alegre (Brazil). Programa de Pos-Graduacao em Engenharia Mecanica; Bogado Leite, Sergio de Queiroz [Comissao Nacional de Energia Nuclear, Rio de Janeiro (Brazil)

2014-11-15

In this work the authors solved the steady state neutron diffusion equation for a multi-layer slab assuming the multi-group energy model. The method to solve the equation system is based on an expansion in Taylor Series resulting in an analytical expression. The results obtained can be used as initial condition for neutron space kinetics problems. The neutron scalar flux was expanded in a power series, and the coefficients were found by using the ordinary differential equation and the boundary and interface conditions. The effective multiplication factor k was evaluated using the power method. We divided the domain into several slabs to guarantee the convergence with a low truncation order. We present the formalism together with some numerical simulations.

Modification of epigenetic patterns in low birth weight children: importance of hypomethylation of the ACE gene promoter.

Science.gov (United States)

Rangel, Marina; dos Santos, Jéssica Cassilla; Ortiz, Paula Helena Lima; Hirata, Mario; Jasiulionis, Miriam Galvonas; Araujo, Ronaldo C; Ierardi, Daniela Filippini; Franco, Maria do Carmo

2014-01-01

There is a growing body of evidence that epigenetic alterations are involved in the pathological mechanisms of many chronic disorders linked to fetal programming. Angiotensin-converting enzyme (ACE) appears as one candidate gene that brings new insights into the epigenetic control and later development of diseases. In this view, we have postulated that epigenetic modifications in the ACE gene might show different interactions between birth weight (BW), blood pressure levels, plasma ACE activity and ACE I/D polymorphism. To explore this hypothesis, we performed a cross-sectional study to evaluate the DNA methylation of 3 CpG sites using pyrosequencing within the ACE gene promoter of peripheral blood leukocytes from 45 LBW children compared with 70 NBW children. Our results have revealed that LBW children have lower methylation levels (PACE activity (P = 0.001). Adjusting for prematurity, gender, age, body mass index, and family history of cardiovascular disease did not alter these findings. We have also performed analyses of individual CpG sites. The frequency of DNA methylation was significantly different at two CpG sites (site 1: nucleotide position +555; and site 3: nucleotide position +563). In addition, we have found a significant inverse correlation between degree of DNA methylation and both ACE activity (PACE gene promoter is associated with LBW in 6 to 12 year-old children. The magnitude of these epigenetic changes appears to be clinically important, which is supported by the observation that discrete changes in DNA methylation can affect systolic blood pressure and ACE protein activity levels.

Prevalence of angiotensin converting enzyme (ACE gene insertion/deletion polymorphism in South Indian population with hypertension and chronic kidney disease

Directory of Open Access Journals (Sweden)

R Shanmuganathan

2015-01-01

Full Text Available Context: Chronic Kidney Disease (CKD is associated with a high risk of developing further severe complications such as, cardiovascular disease and eventually End Stage Renal Disease (ESRD leading to death. Hypertension plays a key role in the progression of renal failure and is also a chief risk factor for the occurrence of End Stage Renal Disease (ESRD. Aim: This study investigates the possible association of insertion (I and deletion (D polymorphism of ACE gene in patients of Chronic Kidney Disease (CKD with and without hypertension (HT. Settings and Design: Total 120 participants with 30 members in each group (Control, HT, CKD and CKD-HT were chosen followed by informed consent. Materials and Methods: Blood samples were collected and subjected to biochemical analyses and nested PCR amplification was performed to genotype the DNA, for ACE I/D using specific primers. Statistical Analysis: Statistical analyses were performed using SPSS version 13. Allele and genotypic frequency was calculated by direct gene counting method. Comparison of the different genotypes was done by using Chi square test. Odd′s ratios were calculated with a 95% confidence interval limit. Results: The ACE genotype were distributed as II, 27 (90%; DD, 2 (6.67% and ID, 1 (3.33% in control, II, 1 (3.33%; DD, 5 (16.67% and ID, 24 (80% in HT, II, 4 (13.33%; DD, 24 (80% and ID, 2 (6.67% in CKD and II, 0 (0%; DD, 2 (6.67% and ID, 28 (93.33% in CKD-HT group. Conclusions: D allele of ACE gene confers a greater role in genetic variations underlying CKD and hypertension. This result suggest that CKD patients should be offered analysis for defects in ACE I/D polymorphisms, especially if they are hypertensive.

Tissue-specific expression of transgenic secreted ACE in vasculature can restore normal kidney functions, but not blood pressure, of Ace-/- mice.

Directory of Open Access Journals (Sweden)

Saurabh Chattopadhyay

Full Text Available Angiotensin-converting enzyme (ACE regulates normal blood pressure and fluid homeostasis through its action in the renin-angiotensin-system (RAS. Ace-/- mice are smaller in size, have low blood pressure and defective kidney structure and functions. All of these defects are cured by transgenic expression of somatic ACE (sACE in vascular endothelial cells of Ace-/- mice. sACE is expressed on the surface of vascular endothelial cells and undergoes a natural cleavage secretion process to generate a soluble form in the body fluids. Both the tissue-bound and the soluble forms of ACE are enzymatically active, and generate the vasoactive octapeptide Angiotensin II (Ang II with equal efficiency. To assess the relative physiological roles of the secreted and the cell-bound forms of ACE, we expressed, in the vascular endothelial cells of Ace-/- mice, the ectodomain of sACE, which corresponded to only the secreted form of ACE. Our results demonstrated that the secreted form of ACE could normalize kidney functions and RAS integrity, growth and development of Ace-/- mice, but not their blood pressure. This study clearly demonstrates that the secreted form of ACE cannot replace the tissue-bound ACE for maintaining normal blood pressure; a suitable balance between the tissue-bound and the soluble forms of ACE is essential for maintaining all physiological functions of ACE.

Tissue-specific expression of transgenic secreted ACE in vasculature can restore normal kidney functions, but not blood pressure, of Ace-/- mice.

Science.gov (United States)

Chattopadhyay, Saurabh; Kessler, Sean P; Colucci, Juliana Almada; Yamashita, Michifumi; Senanayake, Preenie deS; Sen, Ganes C

2014-01-01

Angiotensin-converting enzyme (ACE) regulates normal blood pressure and fluid homeostasis through its action in the renin-angiotensin-system (RAS). Ace-/- mice are smaller in size, have low blood pressure and defective kidney structure and functions. All of these defects are cured by transgenic expression of somatic ACE (sACE) in vascular endothelial cells of Ace-/- mice. sACE is expressed on the surface of vascular endothelial cells and undergoes a natural cleavage secretion process to generate a soluble form in the body fluids. Both the tissue-bound and the soluble forms of ACE are enzymatically active, and generate the vasoactive octapeptide Angiotensin II (Ang II) with equal efficiency. To assess the relative physiological roles of the secreted and the cell-bound forms of ACE, we expressed, in the vascular endothelial cells of Ace-/- mice, the ectodomain of sACE, which corresponded to only the secreted form of ACE. Our results demonstrated that the secreted form of ACE could normalize kidney functions and RAS integrity, growth and development of Ace-/- mice, but not their blood pressure. This study clearly demonstrates that the secreted form of ACE cannot replace the tissue-bound ACE for maintaining normal blood pressure; a suitable balance between the tissue-bound and the soluble forms of ACE is essential for maintaining all physiological functions of ACE.

Hypoglycemia, S-ACE and ACE genotypes in a Danish nationwide population of children and adolescents with type 1 diabetes

DEFF Research Database (Denmark)

Johannesen, Jesper; Svensson, Jannet; Bergholdt, Regine

2011-01-01

OBJECTIVE: High S-ACE levels have been shown to predispose to increased risk of hypoglycemia, however; some inconsistency relates to the risk of the ACE genotype. We investigated the association between S-ACE level at diagnosis and ACE genotype to long-term risk of severe hypoglycemia in more than...... to increased risk of hypoglycemia generated from a negative binominal model were long diabetes duration (p high S-ACE level (p = 0.0497) when adjusted for ACE genotype. In the stratified analysis, S-ACE and insulin dosage were associated with hypoglycemia in girls (p = 0.026 and 0...

3D Indoor Building Environment Reconstruction using calibration of Range finder Data

DEFF Research Database (Denmark)

Jamali, Ali; Anton, François; Rahman, Alias Abdul

2015-01-01

Measurement (EDM) and Terrestrial Laser Scanner (TLS) are mostly used. In this paper, several techniques for indoor 3D building data acquisition have been investigated. For reducing the time and cost of indoor building data acquisition process, the Trimble LaserAce 1000 range finder is used. The accuracy...

LOFT shield tank steady state temperatures with addition of gamma and neutron shielding

International Nuclear Information System (INIS)

Kyllingstad, G.

1977-01-01

The effect of introducing a neutron and gamma shield into the annulus between the reactor vessel and the shield tank is analyzed. This addition has been proposed in order to intercept neutron streaming up the annulus during nuclear operations. Its installation will require removal of approximately 20- 1 / 2 inches of stainless steel foil insulation at the top of the annulus. The resulting conduction path is believed to result in increased water temperatures within the shield tank, possibly beyond the 150 0 F limit, and/or cooling of the reactor vessel nozzles such that adverse thermal stresses would be generated. A two dimensional thermal analysis using the finite element code COUPLE/MOD2 was done for the shield tank system illustrated in the figure (1). The reactor was assumed to be at full power, 55 MW (th), with a loop flow rate of 2.15 x 10 6 lbm/hr (268.4 kg/s) at 2250 psi (15.51 MPa). Calculations indicate a steady state shield tank water temperature of 140 0 F (60 0 C). This is below the 150 0 F (65.56 0 C) limit. Also, no significant changes in thermal gradients within the nozzle or reactor vessel wall are generated. A spacer between the gamma shield and the shield tank is recommended, however, in order to ensure free air circulation through the annulus

Genetic associations of body composition, flexibility and injury risk with ACE, ACTN3 and COL5A1 polymorphisms in Korean ballerinas

Science.gov (United States)

Kim, Jun Ho; Jung, Eun Sun; Kim, Chul-Hyun; Youn, Hyeon; Kim, Hwa Rye

2014-01-01

[Purpose] The purpose of this study was to exam the association of body composition, flexibility, and injury risk to genetic polymorphisms including ACE ID, ACTN3 RX, and COL5A1 polymorphisms in ballet dancers in Korea. [Methods] For the purpose of this study, elite ballerinas (n = 97) and normal female adults (n = 203) aged 18 to 39 were recruited and these participants were tested for body weight, height, body fat, fat free mass, flexibility, injury risks on the joints and gene polymorphisms (ACE, ACTN3, COL5A1 polymorphism). [Results] As results, the ACE DD genotype in ballerinas was associated with higher body fat and percentage of body fat than the ACE II and ID genotypes (p sports injuries, the ankle injury of the XX-genotyped ballerinas was in significantly more prevalence than the RR and XX-genotyped ballerinas (p < 0.05). According to the odd ratio analysis, XX-genotyped ballerinas have the injury risk on the ankle about 4.7 (95% CI: 1.6~13.4, p < 0.05) times more than the RR and RX-genotyped ballerinas. Meanwhile, the COL5A1 polymorphism in ballerinas has no association with any factors including flexibility and injury risks. [Conclusion] In conclusion, ACE polymorphism and ACTN3 polymorphism were associated with ballerinas' performance capacity; COL5A1 was not associated with any factors of performance of Ballerinas. The results suggested that the ACE DD genotype is associated with high body fat, the ACTN3 XX genotype is associated with low fat-free mass, low flexibility, and higher risk of ankle-joint injury. PMID:25566457

Numerical Simulation for Flow Distribution in ACE7 Fuel Assemblies affected by a Spacer Grid Deformation

Energy Technology Data Exchange (ETDEWEB)

Park, Jongpil; Jeong, Ji Hwan [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

In spite of various efforts to understand hydraulic phenomena in a rod bundle containing deformed rods due to swelling and/or ballooning of clad, the studies for flow blockage due to spacer grid deformation have been limited. In the present work, 3D CFD analysis for flow blockage was performed to evaluate coolant flow within ACE7 fuel assemblies (FAs) containing a FA affected by a spacer grid deformation. The real geometry except for inner grids was used in the simulation and the region including inner grid was replaced by porous media. In the present work, the numerical simulation was performed to predict coolant flow within ACE7 FAs affected by a Mid grid deformation. The 3D CFD result shows that approximately 60 subchannel hydraulic diameter is required to fully recover coolant flow under normal operating condition.

Large solid-angle polarisation analysis at thermal neutron wavelengths using a sup 3 He spin filter

CERN Document Server

Heil, W; Cywinski, R; Humblot, H; Ritter, C; Roberts, T W; Stewart, J R

2002-01-01

The strongly spin-dependent absorption of neutrons in nuclear spin-polarised sup 3 He opens up the possibility of polarising neutrons from reactors and spallation sources over the full kinematical range of cold, thermal and hot neutrons. In this paper we describe the first large solid-angle polarisation analysis measurement using a sup 3 He neutron spin filter at thermal neutron wavelengths (lambda=2.5 A). This experiment was performed on the two-axis diffractometer D1B at the Institut Laue-Langevin using a banana-shaped filter cell (530 cm sup 3 ) filled with sup 3 He gas with a polarisation of P=52% at a pressure of 2.7 bar. A comparison is made with a previous measurement on D7 using a cold neutron beam on the same sample, i.e. amorphous ErY sub 6 Ni sub 3. Using uniaxial polarisation analysis both the nuclear and magnetic cross-sections could be extracted over the range of scattering-vectors [0.5<=Q(A sup - sup 1)<=3.5]. The results are in qualitative and quantitative agreement with the D7-data, whe...

JRR-3 neutron radiography facility

International Nuclear Information System (INIS)

Matsubayashi, M.; Tsuruno, A.

1992-01-01

JRR-3 neutron radiography facility consists of thermal neutron radiography facility (TNRF) and cold neutron radiography facility (CNRF). TNRF is installed in JRR-3 reactor building. CNRF is installed in the experimental beam hall adjacent to the reactor building. (author)

Association of insertion/deletion polymorphism of angiotensin-converting enzyme gene among Malay male hypertensive subjects in response to ACE inhibitors.

Science.gov (United States)

Heidari, Farzad; Vasudevan, Ramachandran; Mohd Ali, Siti Zubaidah; Ismail, Patimah; Etemad, Ali; Pishva, Seyyed Reza; Othman, Fauziah; Abu Bakar, Suhaili

2015-12-01

Several studies show that the insertion/deletion (I/D) polymorphism of the angiotensin-converting enzyme (ACE) gene has been associated with hypertension in various populations. The present study sought to determine the association of the I/D gene polymorphism among Malay male essential hypertensive subjects in response to ACE inhibitors (enalapril and lisinopril). A total of 72 patients with newly diagnosed hypertension and 72 healthy subjects were recruited in this study. Blood pressure was recorded from 0 to 24 weeks of treatment with enalapril or lisinopril. Genotyping of the I/D polymorphism was carried out using a standard PCR method. Statistically significant association of the D allele of the ACE gene was observed between the case and control subjects (p ACE gene. Patients carrying the DD genotype had higher blood pressure-lowering response when treated with ACE inhibitors enalapril or lisinopril than those carrying ID and II genotypes, suggesting that the D allele may be a possible genetic marker for essential hypertension among Malay male subjects. © The Author(s) 2014.

Contour analysis of steady state tokamak reactor performance

International Nuclear Information System (INIS)

Devoto, R.S.; Fenstermacher, M.E.

1990-01-01

A new method of analysis for presenting the possible operating space for steady state, non-ignited tokamak reactors is proposed. The method uses contours of reactor performance and plasma characteristics, fusion power gain, wall neutron flux, current drive power, etc., plotted on a two-dimensional grid, the axes of which are the plasma current I p and the normalized beta, β n = β/(I p /aB 0 ), to show possible operating points. These steady state operating contour plots are called SOPCONS. This technique is illustrated in an application to a design for the International Thermonuclear Experimental Reactor (ITER) with neutral beam, lower hybrid and bootstrap current drive. The utility of the SOPCON plots for pointing out some of the non-intuitive considerations in steady state reactor design is shown. (author). Letter-to-the-editor. 16 refs, 3 figs, 1 tab

Neutron--neutron logging

International Nuclear Information System (INIS)

Allen, L.S.

1977-01-01

A borehole logging tool includes a steady-state source of fast neutrons, two epithermal neutron detectors, and two thermal neutron detectors. A count rate meter is connected to each neutron detector. A first ratio detector provides an indication of the porosity of the formation surrounding the borehole by determining the ratio of the outputs of the two count rate meters connected to the two epithermal neutron detectors. A second ratio detector provides an indication of both porosity and macroscopic absorption cross section of the formation surrounding the borehole by determining the ratio of the outputs of the two count rate meters connected to the two thermal neutron detectors. By comparing the signals of the two ratio detectors, oil bearing zones and salt water bearing zones within the formation being logged can be distinguished and the amount of oil saturation can be determined. 6 claims, 2 figures

Cross sections for D-T neutron interaction with neodymium isotopes

International Nuclear Information System (INIS)

Luo, Junhua; An, Li; Jiang, Li; He, Long

2015-01-01

The cross-sections for (n, x) reactions with neodymium isotopes were measured at (D-T) neutron energies around 14 MeV with the activation technique. Samples were activated along with Nb and Al monitor foils to determine the incident neutron flux. Data are reported for the following reactions: 142 Nd(n,2n) 141 Nd, 148 Nd(n,2n) 147 Nd, 150 Nd(n,2n) 149 Nd, 142 Nd(n,p) 142 Pr, 146 Nd(n,α) 143 Ce, and 146 Nd(n,p) 146 Pr. Theoretical calculations of excitation functions were performed with the TALYS-1.6 nuclear model code, at neutron energies varying from the reaction threshold to 20 MeV. The results were discussed and compared with experimental data found in the literature, and with the comprehensive evaluation data in ENDF/B-VII.1, JENDL-4.0, and CENDL-3 libraries. - Highlights: • The cross sections for the (n,x) reactions on Neodymium have been measured. • Mono-energetic neutron beams using the D-T reaction; Energies: 13.5–14.8 MeV. • Neutron cross-section measurements by means of the activation technique. • Reference reactions 93 Nb(n,2n) 92m Nb and 27 (n, α) 24 Na were used as the monitor. • Nuclear reaction code TALYS-1.6 was used