WorldWideScience

Sample records for steady state lhcd

  1. Steady states in conformal theories

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    A novel conjecture regarding the steady state behavior of conformal field theories placed between two heat baths will be presented. Some verification of the conjecture will be provided in the context of fluid dynamics and holography.

  2. Steady-State Process Modelling

    DEFF Research Database (Denmark)

    Cameron, Ian; Gani, Rafiqul

    2011-01-01

    This chapter covers the basic principles of steady state modelling and simulation using a number of case studies. Two principal approaches are illustrated that develop the unit operation models from first principles as well as through application of standard flowsheet simulators. The approaches...... illustrate the “equation oriented” approach as well as the “sequential modular” approach to solving complex flowsheets for steady state applications. The applications include the Williams-Otto plant, the hydrodealkylation (HDA) of toluene, conversion of ethylene to ethanol and a bio-ethanol process....

  3. Overview of EAST experiments on the development of high-performance steady-state scenario

    Science.gov (United States)

    Wan, B. N.; Liang, Y. F.; Gong, X. Z.; Li, J. G.; Xiang, N.; Xu, G. S.; Sun, Y. W.; Wang, L.; Qian, J. P.; Liu, H. Q.; Zhang, X. D.; Hu, L. Q.; Hu, J. S.; Liu, F. K.; Hu, C. D.; Zhao, Y. P.; Zeng, L.; Wang, M.; Xu, H. D.; Luo, G. N.; Garofalo, A. M.; Ekedahl, A.; Zhang, L.; Zhang, X. J.; Huang, J.; Ding, B. J.; Zang, Q.; Li, M. H.; Ding, F.; Ding, S. Y.; Lyu, B.; Yu, Y. W.; Zhang, T.; Zhang, Y.; Li, G. Q.; Xia, T. Y.; the EAST Team; Collaborators

    2017-10-01

    The EAST research program aims to demonstrate steady-state long-pulse advanced high-performance H-mode operations with ITER-like poloidal configuration and RF-dominated heating schemes. Since the 2014 IAEA FEC, EAST has been upgraded with all ITER-relevant auxiliary heating and current drive systems, enabling the investigation of plasma profile control by the coupling/integration of various auxiliary heating combinations. Fully non-inductive steady-state H-mode plasma (H 98,y2  >  1.1) was extended over 60 s for the first time with sole RF heating plus good power coupling and impurity and particle control. By means of the 4.6 GHz and 2.45 GHz LHCD systems, H-mode can be obtained and maintained at relatively high density, even up to n e ~ 4.5  ×  1019 m-3, where a current drive effect is still observed. Significant progress has been achieved on EAST, including: (i) demonstration of a steady-state scenario (fully non-inductive with V loop ~ 0.0 V at high β P ~ 1.8 and high-performance in upper single-null (ɛ ~ 1.6) configuration with the tungsten divertor; (ii) discovery of a stationary H-mode regime with no/small ELM using 4.6 GHz LHCD, and; (iii) achievement of ELM suppression in slowly rotating H-mode plasma with n  =  1 and 2 RMP compatible with long-pulse operations. The new advances in scenario development provide an integrated solution in achieving long-pulse steady-state operations on EAST.

  4. Non-Markovianity-assisted steady state entanglement.

    Science.gov (United States)

    Huelga, Susana F; Rivas, Ángel; Plenio, Martin B

    2012-04-20

    We analyze the steady state entanglement generated in a coherently coupled dimer system subject to dephasing noise as a function of the degree of Markovianity of the evolution. By keeping fixed the effective noise strength while varying the memory time of the environment, we demonstrate that non-Markovianity is an essential, quantifiable resource that may support the formation of steady state entanglement whereas purely Markovian dynamics governed by Lindblad master equations lead to separable steady states. This result illustrates possible mechanisms leading to long-lived entanglement in purely decohering, possibly local, environments. We present a feasible experimental demonstration of this noise assisted phenomenon using a system of trapped ions.

  5. Development of 4.6 GHz lower hybrid current drive system for steady state and high performance plasma in EAST

    Energy Technology Data Exchange (ETDEWEB)

    Liu, F.K.; Li, J.G.; Shan, J.F.; Wang, M.; Liu, L.; Zhao, L.M.; Hu, H.C.; Feng, J.Q.; Yang, Y.; Jia, H.; Wang, X.J.; Wu, Z.G.; Ma, W.D.; Huang, Y.Y.; Xu, H.D.; Zhang, J.; Cheng, M.; Xu, L.; Li, M.H.; Li, Y.C.; and others

    2016-12-15

    In order to achieve steady state and high performance plasma in EAST, a new lower hybrid current drive system at a frequency of 4.6 GHz has been built. The system is composed of 24 continuous wave (CW) klystron amplifiers to generate 6MW/CW microwave, 24 standard rectangle waveguide transmission lines with water-cooling plate, a multi-junction grill composed of 576 active (in groups of 8) and 84 passive sub-waveguides arranged in 12 rows and 6 columns, and four sets of high voltage power supplies. The power value and the spectrum of the launched microwave from the antenna can be controlled by the low-power microwave circuits in front of the klystrons. The new LHCD system has been applied to the experiments on EAST tokmak since 2014, and the obtained results suggest that it is effective to couple the wave into plasma and drive plasma current.

  6. Steady-State Creep of Asphalt Concrete

    Directory of Open Access Journals (Sweden)

    Alibai Iskakbayev

    2017-02-01

    Full Text Available This paper reports the experimental investigation of the steady-state creep process for fine-grained asphalt concrete at a temperature of 20 ± 2 °С and under stress from 0.055 to 0.311 MPa under direct tension and was found to occur at a constant rate. The experimental results also determined the start, the end point, and the duration of the steady-state creep process. The dependence of these factors, in addition to the steady-state creep rate and viscosity of the asphalt concrete on stress is satisfactorily described by a power function. Furthermore, it showed that stress has a great impact on the specific characteristics of asphalt concrete: stress variation by one order causes their variation by 3–4.5 orders. The described relations are formulated for the steady-state of asphalt concrete in a complex stressed condition. The dependence is determined between stress intensity and strain rate intensity.

  7. Steady state compact toroidal plasma production

    Science.gov (United States)

    Turner, William C.

    1986-01-01

    Apparatus and method for maintaining steady state compact toroidal plasmas. A compact toroidal plasma is formed by a magnetized coaxial plasma gun and held in close proximity to the gun electrodes by applied magnetic fields or magnetic fields produced by image currents in conducting walls. Voltage supply means maintains a constant potential across the electrodes producing an increasing magnetic helicity which drives the plasma away from a minimum energy state. The plasma globally relaxes to a new minimum energy state, conserving helicity according to Taylor's relaxation hypothesis, and injecting net helicity into the core of the compact toroidal plasma. Controlling the voltage so as to inject net helicity at a predetermined rate based on dissipative processes maintains or increases the compact toroidal plasma in a time averaged steady state mode.

  8. Exploration of steady-state scenarios for the Fusion Development Facility (FDF)

    Science.gov (United States)

    Chan, V. S.; Garofalo, A. M.; Stambaugh, R. D.; Choi, M.; Kinsey, J. E.; Lao, L. L.; Snyder, P. B.; St. John, H. E.; Turnbull, A. D.

    2011-10-01

    A Fusion Nuclear Science Facility (FNSF) has to operate at 105 times longer duration than that of present tokamak discharges. The scalability of plasma sustainment to such a long time is an issue that needs to be resolved by scientific understanding. We carry out steady-state (SS) scenario development of the FDF (a candidate for FNSF-AT) using an iterative process toward a self-consistent solution via alternating temperature profiles and current profile evolution. The temperature profile evolves according to a physics-based transport model GLF23. SS requires large off-axis current drive (CD). To achieve this with no NBI is highly challenging. It however simplifies tritium containment, increases area for tritium breeding, and avoids costly negative-ion NBI technology. We find that with ECH/ECCD only, too much power is required. A SS baseline equilibrium is found by adding LHCD: Qfus ~ 4 , H98 y 2 ~ 1 . 2 , fBS ~ 70 %, Pfus ~ 260 MW, PEC = 35 MW, PLH = 21 MW. The GATO ideal MHD code finds the equilibrium stable to n = 1 internal kink at κ = 2 . 3 . Work supported by General Atomics internal funds.

  9. Development of steady state magnetic sensor

    Energy Technology Data Exchange (ETDEWEB)

    Hara, Shigemitsu; Nakayama, Takahide [Hitachi Ltd., Tokyo (Japan); Nagashima, Akira; Kasai, Satoshi

    1998-12-01

    A prototype of new mechanical sensor based on the steady state electromagnetic force (J x B force) measurement has been developed and tested. The mechanical force sensor is a new type of the magnetic sensor which is available for frequencies smaller than 0.1 Hz. The prototype of the mechanical sensor has been examined, and the following results were obtained; (1) A signal was proportional to simulated force in the load cell tests. (2) A signal drift concerning the temperature was reproducible over the range of the ITER environment. (3) A signal was proportional to the magnetic field in the steady state magnetic field measurement tests. (4) A load cell linearity error did not increase significantly after irradiation of 7.2 x 10{sup 6} Gy. These results indicate that the mechanical sensor will provide the practical feasibility in the long time magnetic field measurement. (author)

  10. Steady state modeling of desiccant wheels

    DEFF Research Database (Denmark)

    Bellemo, Lorenzo; Elmegaard, Brian; Kærn, Martin Ryhl

    2014-01-01

    Desiccant wheels are rotary desiccant dehumidifiers used in air conditioning and drying applications. The modeling of simultaneous heat and mass transfer in these components is crucial for estimating their performances, as well as for simulating and optimizing their implementation in complete...... systems. A steady state two-dimensional model is formulated and implemented aiming to obtain good accuracy and short computational times. Comparison with experimental data from the literature shows that the model reproduces the physical behavior of desiccant wheels. Mass diffusion in the desiccant should...

  11. Magnetic sensor for steady state tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Neyatani, Yuzuru; Mori, Katsuharu; Oguri, Shigeru; Kikuchi, Mitsuru [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

    1996-06-01

    A new type of magnetic sensor has been developed for the measurement of steady state magnetic fields without DC-drift such as integration circuit. The electromagnetic force induced to the current which leads to the sensor was used for the measurement. For the high frequency component which exceeds higher than the vibration frequency of sensor, pick-up coil was used through the high pass filter. From the results using tokamak discharges, this sensor can measure the magnetic field in the tokamak discharge. During {approx}2 hours measurement, no DC drift was observed. The sensor can respond {approx}10ms of fast change of magnetic field during disruptions. We confirm the extension of measured range to control the current which leads to the sensor. (author).

  12. Progress towards Steady State on NSTX

    Energy Technology Data Exchange (ETDEWEB)

    D.A. Gates; C. Kessel; J. Menard; G. Taylor; J.R. Wilson; plus 94 co-authors

    2005-01-24

    In order to reduce recirculating power fraction to acceptable levels, the spherical torus concept relies on the simultaneous achievement of high toroidal {beta} and high bootstrap fraction in steady state. In the last year, as a result of plasma control system improvements, the achievable plasma elongation on the National Spherical Torus Experiment (NSTX) has been raised from {kappa} {approx} 2.1 to {kappa} {approx} 2.6--approximately a 25% increase. This increase in elongation has lead to a doubling increase in the toroidal {beta} for long-pulse discharges. The increase in {beta} is associated with an increase in plasma current at nearly fixed poloidal {beta}, which enables higher {beta}{sub t} with nearly constant bootstrap fraction. As a result, for the first time in a spherical torus, a discharge with a plasma current of 1 MA has been sustained for 1 second. Data is presented from NSTX correlating the increase in performance with increased plasma shaping capability. In addition to improved shaping, H-modes induced during the current ramp phase of the plasma discharge have been used to reduce flux consumption during and to delay the onset of MHD instabilities. A modeled integrated scenario, which has 100% non-inductive current drive with very high toroidal {beta}, will also be presented. The NSTX poloidal field coils are currently being modified to produce the plasma shape which is required for this scenario, which requires high triangularity ({delta} {approx} 0.8) at elevated elongation ({kappa} {approx} 2.5). The other main requirement for steady state on NSTX is the ability to drive a fraction of the total plasma current with radio-frequency waves. The results of High Harmonic Fast Wave heating and current drive studies as well as electron Bernstein Wave emission studies will be presented.

  13. Steady Particle States of Revised Electromagnetics

    Directory of Open Access Journals (Sweden)

    Lehnert B.

    2006-07-01

    Full Text Available A revised Lorentz invariant electromagnetic theory leading beyond Maxwell’s equations, and to a form of extended quantum electrodynamics, has been elaborated on the basis of a nonzero electric charge density and a nonzero electric field divergence in the vacuum state. Among the applications of this theory, there are steady electromagnetic states having no counterpart in conventional theory and resulting in models of electrically charged and neutral leptons, such as the electron and the neutrino. The analysis of the electron model debouches into a point-charge-like geometry with a very small characteristic radius but having finite self-energy. This provides an alternative to the conventional renormalization procedure. In contrast to conventional theory, an integrated radial force balance can further be established in which the electron is prevented from “exploding” under the action of its net self-charge. Through a combination of variational analysis and an investigation of the radial force balance, a value of the electronic charge has been deduced which deviates by only one percent from that obtained in experiments. This deviation requires further investigation. A model of the neutrino finally reproduces some of the basic features, such as a small but nonzero rest mass, an angular momentum but no magnetic moment, and long mean free paths in solid matter.

  14. Steady Particle States of Revised Electromagnetics

    Directory of Open Access Journals (Sweden)

    Lehnert B.

    2006-07-01

    Full Text Available A revised Lorentz invariant electromagnetic theory leading beyond Maxwell's equations, and to a form of extended quantum electrodynamics, has been elaborated on the basis of a nonzero electric charge density and a nonzero electric field divergence in the vacuum state. Among the applications of this theory, there are steady electromagnetic states having no counterpart in conventional theory and resulting in models of electrically charged and neutral leptons, such as the electron and the neutrino. The analysis of the electron model debouches into a point-charge-like geometry with a very small characteristic radius but having finite self-energy. This provides an alternative to the conventional renormalization procedure. In contrast to conventional theory, an integrated radial force balance can further be established in which the electron is prevented from "exploding" under the action of its net self-charge. Through a combination of variational analysis and an investigation of the radial force balance, a value of the electronic charge has been deduced which deviates by only one percent from that obtained in experiments. This deviation requires further investigation. A model of the neutrino finally reproduces some of the basic features, such as a small but nonzero rest mass, an angular momentum but no magnetic moment, and long mean free paths in solid matter.

  15. Fluctuations When Driving Between Nonequilibrium Steady States

    Science.gov (United States)

    Riechers, Paul M.; Crutchfield, James P.

    2017-08-01

    Maintained by environmental fluxes, biological systems are thermodynamic processes that operate far from equilibrium without detailed-balanced dynamics. Yet, they often exhibit well defined nonequilibrium steady states (NESSs). More importantly, critical thermodynamic functionality arises directly from transitions among their NESSs, driven by environmental switching. Here, we identify the constraints on excess heat and dissipated work necessary to control a system that is kept far from equilibrium by background, uncontrolled "housekeeping" forces. We do this by extending the Crooks fluctuation theorem to transitions among NESSs, without invoking an unphysical dual dynamics. This and corresponding integral fluctuation theorems determine how much work must be expended when controlling systems maintained far from equilibrium. This generalizes thermodynamic feedback control theory, showing that Maxwellian Demons can leverage mesoscopic-state information to take advantage of the excess energetics in NESS transitions. We also generalize an approach recently used to determine the work dissipated when driving between functionally relevant configurations of an active energy-consuming complex system. Altogether, these results highlight universal thermodynamic laws that apply to the accessible degrees of freedom within the effective dynamic at any emergent level of hierarchical organization. By way of illustration, we analyze a voltage-gated sodium ion channel whose molecular conformational dynamics play a critical functional role in propagating action potentials in mammalian neuronal membranes.

  16. Maximal lactate steady state in Judo.

    Science.gov (United States)

    de Azevedo, Paulo Henrique Silva Marques; Pithon-Curi, Tania; Zagatto, Alessandro Moura; Oliveira, João; Perez, Sérgio

    2014-04-01

    the purpose of this study was to verify the validity of respiratory compensation threshold (RCT) measured during a new single judo specific incremental test (JSIT) for aerobic demand evaluation. to test the validity of the new test, the JSIT was compared with Maximal Lactate Steady State (MLSS), which is the gold standard procedure for aerobic demand measuring. Eight well-trained male competitive judo players (24.3 ± 7.9 years; height of 169.3 ± 6.7cm; fat mass of 12.7 ± 3.9%) performed a maximal incremental specific test for judo to assess the RCT and performed on 30-minute MLSS test, where both tests were performed mimicking the UchiKomi drills. the intensity at RCT measured on JSIT was not significantly different compared to MLSS (p=0.40). In addition, it was observed high and significant correlation between MLSS and RCT (r=0.90, p=0.002), as well as a high agreement. RCT measured during JSIT is a valid procedure to measure the aerobic demand, respecting the ecological validity of Judo.

  17. Steady-state creep in the mantle

    Directory of Open Access Journals (Sweden)

    G. RANALLI

    1977-06-01

    Full Text Available SUMMARY - The creep equations for steady-state flow of olivine at high
    pressure and temperature are compared in an attempt to elucidate the rheological
    behaviour of the mantle. Results are presented in terms of applied deformation
    maps and curves of effective viscosity v depth.
    In the upper mantle, the transition stress between dislocation and diffusion
    creep is between 10 to 102 bar (as orders of magnitude for grain sizes from
    0.01 to 1 cm. The asthenosphere under continents is deeper, and has higher
    viscosity, than under oceans. Predominance of one creep mechanism above the
    others depends on grain size, strain rate, and volume fraction of melt; the
    rheological response can be different for different geodynamic processes.
    In the lower mantle, on the other hand, dislocation creep is predominant
    at all realistic grain sizes and strain rates. If the effective viscosity has to be only
    slightly higher than in the upper mantle, as some interpretations of glacioisostatic
    rebound suggest, then the activation volume cannot be larger than
    11 cm3 mole^1.

  18. Steady State Vapor Bubble in Pool Boiling.

    Science.gov (United States)

    Zou, An; Chanana, Ashish; Agrawal, Amit; Wayner, Peter C; Maroo, Shalabh C

    2016-02-03

    Boiling, a dynamic and multiscale process, has been studied for several decades; however, a comprehensive understanding of the process is still lacking. The bubble ebullition cycle, which occurs over millisecond time-span, makes it extremely challenging to study near-surface interfacial characteristics of a single bubble. Here, we create a steady-state vapor bubble that can remain stable for hours in a pool of sub-cooled water using a femtosecond laser source. The stability of the bubble allows us to measure the contact-angle and perform in-situ imaging of the contact-line region and the microlayer, on hydrophilic and hydrophobic surfaces and in both degassed and regular (with dissolved air) water. The early growth stage of vapor bubble in degassed water shows a completely wetted bubble base with the microlayer, and the bubble does not depart from the surface due to reduced liquid pressure in the microlayer. Using experimental data and numerical simulations, we obtain permissible range of maximum heat transfer coefficient possible in nucleate boiling and the width of the evaporating layer in the contact-line region. This technique of creating and measuring fundamental characteristics of a stable vapor bubble will facilitate rational design of nanostructures for boiling enhancement and advance thermal management in electronics.

  19. Chlorine decay under steady and unsteady-state hydraulic conditions

    DEFF Research Database (Denmark)

    Stoianov, Ivan; Aisopou, Angeliki

    2014-01-01

    This paper describes a simulation framework for the scale-adaptive hydraulic and chlorine decay modelling under steady and unsteady-state flows. Bulk flow and pipe wall reaction coefficients are replaced with steady and unsteady-state reaction coefficients. An unsteady decay coefficient is defined...

  20. A steady-state and pre-steady-state kinetics study of the tungstoenzyme formaldehyde ferredoxin oxidoreductase from Pyrococcus furiosus

    NARCIS (Netherlands)

    Bol, E.; Broers, N.J.; Hagen, W.R.

    2007-01-01

    Formaldehyde ferredoxin oxidoreductase from Pyrococcus furiosus is a homotetrameric protein with one tungstodipterin and one [4Fe–4S] cubane per 69-kDa subunit. The enzyme kinetics have been studied under steady-state conditions at 80 °C and pre-steady state conditions at 50 °C, in the latter case

  1. Stabilizing unstable steady states using extended time-delay autosynchronization.

    Science.gov (United States)

    Chang, Austin; Bienfang, Joshua C.; Hall, G. Martin; Gardner, Jeff R.; Gauthier, Daniel J.

    1998-12-01

    We describe a method for stabilizing unstable steady states in nonlinear dynamical systems using a form of extended time-delay autosynchronization. Specifically, stabilization is achieved by applying a feedback signal generated by high-pass-filtering in real time the dynamical state of the system to an accessible system parameter or variables. Our technique is easy to implement, does not require knowledge of the unstable steady state coordinates in phase space, automatically tracks changes in the system parameters, and is more robust to broadband noise than previous schemes. We demonstrate the controller's efficacy by stabilizing unstable steady states in an electronic circuit exhibiting low-dimensional temporal chaos. The simplicity and robustness of the scheme suggests that it is ideally suited for stabilizing unstable steady states in ultra-high-speed systems. (c) 1998 American Institute of Physics.

  2. Steady-state leaching of tritiated water from silica gel

    DEFF Research Database (Denmark)

    Das, H.A.; Hou, Xiaolin

    2009-01-01

    Aqueous leaching of tritium from silica gel, loaded by absorption of water vapor, makes part of reactor de-commissioning. It is found to follow the formulation of steady-state diffusion.......Aqueous leaching of tritium from silica gel, loaded by absorption of water vapor, makes part of reactor de-commissioning. It is found to follow the formulation of steady-state diffusion....

  3. Steady state and a general scale law of deformation

    Science.gov (United States)

    Huang, Yan

    2017-07-01

    Steady state deformation has been characterized based on the experimental results for dilute single-phase aluminium alloys. It was found that although characteristic properties such as flow stress and grain size remained constant with time, a continuous loss of grain boundaries occurred as an essential feature at steady state. A physical model, which takes into account the activity of grain boundary dislocations, was developed to describe the kinetics of steady state deformation. According to this model, the steady state as a function of strain rate and temperature defines the limit of the conventional grain size and strength relationship, i.e., the Hall-Petch relation holds when the grain size is larger than that at the steady state, and an inverse Hall-Petch relation takes over if grain size is smaller than the steady state value. The transition between the two relationships relating grain size and strength is a phenomenon that depends on deformation conditions, rather than an intrinsic property as generally perceived. A general scale law of deformation is established accordingly.

  4. Dark Entangled Steady States of Interacting Rydberg Atoms

    DEFF Research Database (Denmark)

    Dasari, Durga; Mølmer, Klaus

    2013-01-01

    their short-lived excited states lead to rapid, dissipative formation of an entangled steady state. We show that for a wide range of physical parameters, this entangled state is formed on a time scale given by the strengths of coherent Raman and Rabi fields applied to the atoms, while it is only weakly...

  5. The Energy Budget of Steady State Photosynthesis

    Energy Technology Data Exchange (ETDEWEB)

    Dr. David M. Kramer

    2012-11-27

    Progress is reported in addressing these questions: Why do hcef mutants have increased CEF1? Is increased CEF1 caused by elevated expression or altered regulation of CEF1 components? Which metabolic pools can be regulators of CEF1? Do metabolites influence CEF1 directly or indirectly? Which CEF1 pathways are activated in high CEF1 mutants? Is PQR a proton pump? Is elevated CEF1 activated by state transitions?

  6. Non-equilibrium steady state in the hydro regime

    Energy Technology Data Exchange (ETDEWEB)

    Pourhasan, Razieh [Science Institute, University of Iceland,Dunhaga 5, 107 Reykjavik (Iceland)

    2016-02-01

    We study the existence and properties of the non-equilibrium steady state which arises by putting two copies of systems at different temperatures into a thermal contact. We solve the problem for the relativistic systems that are described by the energy-momentum of a perfect hydro with general equation of state (EOS). In particular, we examine several simple examples: a hydro with a linear EOS, a holographic CFT perturbed by a relevant operator and a barotropic fluid, i.e., P=P(E). Our studies suggest that the formation of steady state is a universal result of the hydro regime regardless of the kind of fluid.

  7. Electric machines steady state, transients, and design with Matlab

    CERN Document Server

    Boldea, Ion

    2009-01-01

    Part I: Steady StateIntroductionElectric Energy and Electric MachinesBasic Types of Transformers and Electric MachinesLosses and EfficiencyPhysical Limitations and RatingsNameplate RatingsMethods of AnalysisState of the Art and Perspective Electric TransformersAC Coil with Magnetic Core and Transformer Principles Magnetic Materials in EMs and Their LossesElectric Conductors and Their Skin EffectsComponents of Single- and 3-Phase TransformersFlux Linkages and Inductances of Single-Phase TransformersCircuit Equations of Single-Phase Transformers With Core LossesSteady State and Equivalent Circui

  8. Alternative steady states in ecological networks

    Science.gov (United States)

    Fried, Yael; Shnerb, Nadav M.; Kessler, David A.

    2017-07-01

    In many natural situations, one observes a local system with many competing species that is coupled by weak immigration to a regional species pool. The dynamics of such a system is dominated by its stable and uninvadable (SU) states. When the competition matrix is random, the number of SUs depends on the average value and variance of its entries. Here we consider the problem in the limit of weak competition and large variance. Using a yes-no interaction model, we show that the number of SUs corresponds to the number of maximum cliques in an Erdös-Rényi network. The number of SUs grows exponentially with the number of species in this limit, unless the network is completely asymmetric. In the asymmetric limit, the number of SUs is O (1 ) . Numerical simulations suggest that these results are valid for models with a continuous distribution of competition terms.

  9. Efficient steady-state solver for hierarchical quantum master equations.

    Science.gov (United States)

    Zhang, Hou-Dao; Qiao, Qin; Xu, Rui-Xue; Zheng, Xiao; Yan, YiJing

    2017-07-28

    Steady states play pivotal roles in many equilibrium and non-equilibrium open system studies. Their accurate evaluations call for exact theories with rigorous treatment of system-bath interactions. Therein, the hierarchical equations-of-motion (HEOM) formalism is a nonperturbative and non-Markovian quantum dissipation theory, which can faithfully describe the dissipative dynamics and nonlinear response of open systems. Nevertheless, solving the steady states of open quantum systems via HEOM is often a challenging task, due to the vast number of dynamical quantities involved. In this work, we propose a self-consistent iteration approach that quickly solves the HEOM steady states. We demonstrate its high efficiency with accurate and fast evaluations of low-temperature thermal equilibrium of a model Fenna-Matthews-Olson pigment-protein complex. Numerically exact evaluation of thermal equilibrium Rényi entropies and stationary emission line shapes is presented with detailed discussion.

  10. Fractality in nonequilibrium steady states of quasiperiodic systems

    Science.gov (United States)

    Varma, Vipin Kerala; de Mulatier, Clélia; Žnidarič, Marko

    2017-09-01

    We investigate the nonequilibrium response of quasiperiodic systems to boundary driving. In particular, we focus on the Aubry-André-Harper model at its metal-insulator transition and the diagonal Fibonacci model. We find that opening the system at the boundaries provides a viable experimental technique to probe its underlying fractality, which is reflected in the fractal spatial dependence of simple observables (such as magnetization) in the nonequilibrium steady state. We also find that the dynamics in the nonequilibrium steady state depends on the length of the chain chosen: generic length chains harbour qualitatively slower transport (different scaling exponent) than Fibonacci length chains, which is in turn slower than in the closed system. We conjecture that such fractal nonequilibrium steady states should arise in generic driven critical systems that have fractal properties.

  11. Steady-state propagation of interface corner crack

    DEFF Research Database (Denmark)

    Veluri, Badrinath; Jensen, Henrik Myhre

    2013-01-01

    Steady-state propagation of interface cracks close to three-dimensional corners has been analyzed. Attention was focused on modeling the shape of the interface crack front and calculating the critical stress for steady-state propagation of the crack. The crack propagation was investigated...... field (crack tip) solutions based on the J-integral. The adopted two-dimensional numerical approach for the calculation of fracture mechanical properties was compared with three-dimensional models for quarter-circular and straight sided crack front shapes. A quantitative approach was formulated based...... for propagation and the angle of intersection of the crack front with the free edge....

  12. Principle of Entropy Maximization for Nonequilibrium Steady States

    DEFF Research Database (Denmark)

    Shapiro, Alexander; Stenby, Erling Halfdan

    2002-01-01

    has a maximum in a steady state with regard to some thermodynamic variables, the matrix of the Onsager phenomenological coefficients becomes diagonal. The theorem requires consistent rules of the coordinate transformations in the non-equilibrium thermodynamics. Such rules are formulated. The results......The goal of this contribution is to find out to what extent the principle of entropy maximization, which serves as a basis for the equilibrium thermodynamics, may be generalized onto non-equilibrium steady states. We prove a theorem that, in the system of thermodynamic coordinates, where entropy...

  13. Emergence of advance waves in a steady-state universe

    Energy Technology Data Exchange (ETDEWEB)

    Hobart, R.H.

    1979-10-01

    In standard Wheeler-Feynman electrodynamics advanced waves from any source are absolutely canceled by the advanced waves from the absorber responding to that source. The present work shows this cancellation fails over cosmic distances in a steady-state universe. A test of the view proposed earlier, in a paper which assumed failure of cancellation ad hoc, that zero-point fluctuations of the electromagnetic field are such emergent advanced waves, is posed. The view entails anomalous slowing of spontaneous transition rates at longer emission wavelengths; available data go against this, furnishing additional argument against the suspect assumption that the universe is steady-state.

  14. Statistical Discrimination of Steady State Shift Damage Localization Metrics

    DEFF Research Database (Denmark)

    Bull, Thomas; Markvart, Morten Kusk; Sekjær, Claus

    2017-01-01

    When inspecting a linear structure subjected to spatially invariant, repeatable excitation, the recently proposed steady state shift damage localization (S3DL) method offers damage localization by mapping a postulated damage pattern to the damage-induced change in the steady state response...... with a cantilevered residential-sized wind turbine blade, which is exposed to a harmonic input and with the output taken as accelerations captured along the blade edges. Damage is manifested as a stiffness change and the damage localization interrogation will be carried out accordingly....

  15. A steady-state and pre-steady-state kinetics study of the tungstoenzyme formaldehyde ferredoxin oxidoreductase from Pyrococcus furiosus

    NARCIS (Netherlands)

    Bol, E.; Broers, N.J.; Hagen, W.R.

    2007-01-01

    Formaldehyde ferredoxin oxidoreductase from Pyrococcus furiosus is a homotetrameric protein with onetungstodipterin and one [4Fe–4S] cubane per 69-kDa subunit. The enzyme kinetics have been studied understeady-state conditions at 80 C and pre-steady state conditions at 50 C, in the latter case via

  16. Combined Steady-State and Dynamic Heat Exchanger Experiment

    Science.gov (United States)

    Luyben, William L.; Tuzla, Kemal; Bader, Paul N.

    2009-01-01

    This paper describes a heat-transfer experiment that combines steady-state analysis and dynamic control. A process-water stream is circulated through two tube-in-shell heat exchangers in series. In the first, the process water is heated by steam. In the second, it is cooled by cooling water. The equipment is pilot-plant size: heat-transfer areas…

  17. Practical error analysis of the quasi-steady-state approximation ...

    African Journals Online (AJOL)

    The Quasi-Steady-State Approximation (QSSA) is a method of getting approximate solutions to differential equations, developed heuristically in biochemistry early this century. It can produce acceptable and important results even when formal analytic and numerical procedures fail. It has become associated with singular ...

  18. The effectiveness of the Auditory Steady State Response in ...

    African Journals Online (AJOL)

    This paper aims to provide a review of the emerging Auditory Steady State Response in light of existing procedures for diagnosis of hearing loss in infants. Determining the type, degree, and configuration of hearing loss in infants is a challenge requiring sophisticated electrophysiological equipment of which Auditory ...

  19. Haematological values in sickle cell anaemia in steady state and ...

    African Journals Online (AJOL)

    occlusive crisis in Benin City, Nigeria. ... Annals of African Medicine ... Method: A prospective study of 200 patients (81.3%) in steady state, 46 patients (18.7%) during vaso-occlusive crisis (VOC) and 84 control subjects seen between August 2001 ...

  20. Classical orbital paramagnetism in non-equilibrium steady state

    Indian Academy of Sciences (India)

    58

    Abstract. We report the results of our numerical simulation of classical-dissipative dynamics of a charged particle subjected to a non-markovian stochastic forcing. We find that the system develops a steady-state orbital magnetic moment in the presence of a static magnetic field. Very significantly, the sign of the orbital ...

  1. Stabilizing the border steady-state solution of two interacting ...

    African Journals Online (AJOL)

    In this paper, we have successfully developed a feedback control which has been used to stabilize an unstable steady-state solution (0, 3.3534). This convergence has occurred when the values of the final time are 190, 200, 210 and 220 which corresponds to the scenario when the value of the step length of our simulation ...

  2. Steady States of the Parametric Rotator and Pendulum

    Science.gov (United States)

    Bouzas, Antonio O.

    2010-01-01

    We discuss several steady-state rotation and oscillation modes of the planar parametric rotator and pendulum with damping. We consider a general elliptic trajectory of the suspension point for both rotator and pendulum, for the latter at an arbitrary angle with gravity, with linear and circular trajectories as particular cases. We treat the…

  3. Exact results on the steady state of a hopping model

    Science.gov (United States)

    Zhang, M. Q.

    1987-03-01

    A hopping model described by Katz, Lebowitz, and Spohn [J. Stat. Phys. 34, 497 (1983)] and by Valles and Marro [J. Stat. Phys. 43, 441 (1986)] is studied analytically for small lattice systems. The dependence of the nonequilibrium steady state on various parameters and transition rate functions is obtained exactly. The results are compared with simulations on large systems.

  4. Correlates of Steady-State Haematocrit and Hepatosplenomegaly in ...

    African Journals Online (AJOL)

    Backgroup: Sickle cell disease is a common genetic disorder in Nigeria. Objectives: To determine the steady state haematocrit, liver size and spleen size in children with sickle cell disease and the factors that influence them. Methods: This was a retrospective study of children with sickle cell disorders who attended the ...

  5. Dispersive and steady-state recombination in organic disordered semiconductors

    Science.gov (United States)

    Hofacker, Andreas; Neher, Dieter

    2017-12-01

    Charge carrier recombination in organic disordered semiconductors is strongly influenced by the thermalization of charge carriers in the density of states (DOS). Measurements of recombination dynamics, conducted under transient or steady-state conditions, can easily be misinterpreted when a detailed understanding of the interplay of thermalization and recombination is missing. To enable adequate measurement analysis, we solve the multiple-trapping problem for recombining charge carriers and analyze it in the transient and steady excitation paradigm for different DOS distributions. We show that recombination rates measured after pulsed excitation are inherently time dependent since recombination gradually slows down as carriers relax in the DOS. When measuring the recombination order after pulsed excitation, this leads to an apparent high-order recombination at short times. As times goes on, the recombination order approaches an asymptotic value. For the Gaussian and the exponential DOS distributions, this asymptotic value equals the recombination order of the equilibrated system under steady excitation. For a more general DOS distribution, the recombination order can also depend on the carrier density, under both transient and steady-state conditions. We conclude that transient experiments can provide rich information about recombination in and out of equilibrium and the underlying DOS occupation provided that consistent modeling of the system is performed.

  6. Progress and prospect of true steady state operation with RF

    Science.gov (United States)

    Jacquinot, Jean

    2017-10-01

    Operation of fusion confinement experiments in full steady state is a major challenge for the development towards fusion energy. Critical to achieving this goal is the availability of actively cooled plasma facing components and auxiliary systems withstanding the very harsh plasma environment. Equally challenging are physics issues related to achieving plasma conditions and current drive efficiency required by reactor plasmas. RF heating and current drive systems have been key instruments for obtaining the progress made until today towards steady state. They hold all the records of long pulse plasma operation both in tokamaks and in stellarators. Nevertheless much progress remains to be made in particular for integrating all the requirements necessary for maintaining in steady state the density and plasma pressure conditions of a reactor. This is an important stated aim of ITER and of devices equipped with superconducting magnets. After considering the present state of the art, this review will address the key issues which remain to be solved both in physics and technology for reaching this goal. They constitute very active subjects of research which will require much dedicated experimentation in the new generation of superconducting devices which are now in operation or becoming close to it.

  7. Steady State Dynamic Operating Behavior of Universal Motor

    Directory of Open Access Journals (Sweden)

    Muhammad Khan Burdi

    2015-01-01

    Full Text Available A detailed investigation of the universal motor is developed and used for various dynamic steady state and transient operating conditions of loads. In the investigation, output torque, motor speed, input current, input/output power and efficiency are computed, compared and analyzed for different loads. While this paper discusses the steady-state behavior of the universal motor, another companion paper, ?Transient dynamic behavior of universal motor?, will discuss its transient behavior in detail. A non-linear generalized electric machine model of the motor is considered for the analysis. This study was essential to investigate effect of output load on input current, power, speed and efficiency of the motor during operations. Previously such investigation is not known

  8. Non-equilibrium steady states in supramolecular polymerization

    Science.gov (United States)

    Sorrenti, Alessandro; Leira-Iglesias, Jorge; Sato, Akihiro; Hermans, Thomas M.

    2017-06-01

    Living systems use fuel-driven supramolecular polymers such as actin to control important cell functions. Fuel molecules like ATP are used to control when and where such polymers should assemble and disassemble. The cell supplies fresh ATP to the cytosol and removes waste products to sustain steady states. Artificial fuel-driven polymers have been developed recently, but keeping them in sustained non-equilibrium steady states (NESS) has proven challenging. Here we show a supramolecular polymer that can be kept in NESS, inside a membrane reactor where ATP is added and waste removed continuously. Assembly and disassembly of our polymer is regulated by phosphorylation and dephosphorylation, respectively. Waste products lead to inhibition, causing the reaction cycle to stop. Inside the membrane reactor, however, waste can be removed leading to long-lived NESS conditions. We anticipate that our approach to obtain NESS can be applied to other stimuli-responsive materials to achieve more life-like behaviour.

  9. Extending Molecular Theory to Steady-State Diffusing Systems

    Energy Technology Data Exchange (ETDEWEB)

    FRINK,LAURA J. D.; SALINGER,ANDREW G.; THOMPSON,AIDAN P.

    1999-10-22

    Predicting the properties of nonequilibrium systems from molecular simulations is a growing area of interest. One important class of problems involves steady state diffusion. To study these cases, a grand canonical molecular dynamics approach has been developed by Heffelfinger and van Swol [J. Chem. Phys., 101, 5274 (1994)]. With this method, the flux of particles, the chemical potential gradients, and density gradients can all be measured in the simulation. In this paper, we present a complementary approach that couples a nonlocal density functional theory (DFT) with a transport equation describing steady-state flux of the particles. We compare transport-DFT predictions to GCMD results for a variety of ideal (color diffusion), and nonideal (uphill diffusion and convective transport) systems. In all cases excellent agreement between transport-DFT and GCMD calculations is obtained with diffusion coefficients that are invariant with respect to density and external fields.

  10. Theoretical analysis of steady state operating forces in control valves

    Directory of Open Access Journals (Sweden)

    Basavaraj Hubballi

    2018-01-01

    Full Text Available The controlling components, such as valves are used to regulate controlled fluid power. It is not always possible to calculate valve forces accurately, and with some types of valves even the existence of certain types of forces cannot be predicted with certainty. In many cases, however, the analysis can be made fairly completely and accurately. The assumption of steady state conditions is valid for the valve alone, but transient effects in the rest of the system may be large. These effects are particularly important with regard to the instability of valves, where the system may react on the valve in such a way as to make it squeal or oscillate, sometimes with large amplitude. The origin of the steady state flow force understood from a brief qualitative explanation. The following paper will summarize much of what is known about valve forces in the spool type controlling element.

  11. Non-Equilibrium Steady States of the XY Chain

    CERN Document Server

    Aschbacher, W H

    2002-01-01

    We study the non-equilibrium statistical mechanics of the two-sided XY chain. We start from an initial state in which the left and right part of the lattice {x|xM}, are at inverse temperatures beta_L and beta_R. Using a simple scattering theoretic analysis, we construct the unique non-equilibrium steady state (NESS). This state depends on beta_L and beta_R, but not on the choice of the decoupling parameter M. We prove that in the non-equilibrium case, beta_L \

  12. Steady State Stokes Flow Interpolation for Fluid Control

    DEFF Research Database (Denmark)

    Bhatacharya, Haimasree; Nielsen, Michael Bang; Bridson, Robert

    2012-01-01

    — suffer from a common problem. They fail to capture the rotational components of the velocity field, although extrapolation in the normal direction does consider the tangential component. We address this problem by casting the interpolation as a steady state Stokes flow. This type of flow captures...... the rotational components and is suitable for controlling liquid animations where tangential motion is pronounced, such as in a breaking wave...

  13. Agricultural pollutant penetration and steady state in thick aquifers.

    Science.gov (United States)

    Kraft, G J; Browne, B A; Devita, W M; Mechenich, D J

    2008-01-01

    The leakage of pollutants from agricultural lands to aquifers has increased greatly, driven by increasing fertilizer and pesticide use. Because this increase is recent, ground water pollutant concentrations, loads, and exports may also be increasing as pollutants penetrate more deeply into aquifers. We established in an aquifer profile a ground water recharge and pollutant leakage chronology in an agricultural landscape where 30 m of till blankets a 57-m thick sandstone aquifer. Pollutant concentrations increased from older ground water (1963) at the aquifer base to younger ground water (1985) at its top, a signal of increasing pollutant leakage. Nitrate-N increased from 0.9 to 13.2 mg/L, implying that leakage increased from 1.9 to 16.5 kg/ha/year. Nitrate load and export could increase from 130% to 230% before reaching a steady state in 20 to 40 years. Chloride increases were similar. Pesticide residues alachlor ethane sulfonic acid (ESA), metolachlor ESA, and atrazine residues partially penetrated the aquifer profile. Their concentration-age-date patterns exhibited an initial increase and then a leveling corresponding to the timing of product adoption and leveling of demand. Unlike NO(3), projecting pesticide residue steady states is complicated by the phasing in and out of pesticide products over time; for example, neither alachlor nor atrazine is currently used in the area, and newer products, which have not had time to transit to the aquifer, have been adopted. The circumstances that resulted in the lack of a pollutant steady state are not rare; thus, the lack of steady states in agricultural region aquifers may not be uncommon.

  14. Mimicking Nonequilibrium Steady States with Time-Periodic Driving

    Science.gov (United States)

    Raz, O.; Subaşı, Y.; Jarzynski, C.

    2016-04-01

    Under static conditions, a system satisfying detailed balance generically relaxes to an equilibrium state in which there are no currents. To generate persistent currents, either detailed balance must be broken or the system must be driven in a time-dependent manner. A stationary system that violates detailed balance evolves to a nonequilibrium steady state (NESS) characterized by fixed currents. Conversely, a system that satisfies instantaneous detailed balance but is driven by the time-periodic variation of external parameters—also known as a stochastic pump (SP)—reaches a periodic state with nonvanishing currents. In both cases, these currents are maintained at the cost of entropy production. Are these two paradigmatic scenarios effectively equivalent? For discrete-state systems, we establish a mapping between nonequilibrium stationary states and stochastic pumps. Given a NESS characterized by a particular set of stationary probabilities, currents, and entropy production rates, we show how to construct a SP with exactly the same (time-averaged) values. The mapping works in the opposite direction as well. These results establish a proof of principle: They show that stochastic pumps are able to mimic the behavior of nonequilibrium steady states, and vice versa, within the theoretical framework of discrete-state stochastic thermodynamics. Nonequilibrium steady states and stochastic pumps are often used to model, respectively, biomolecular motors driven by chemical reactions and artificial molecular machines steered by the variation of external, macroscopic parameters. Our results loosely suggest that anything a biomolecular machine can do, an artificial molecular machine can do equally well. We illustrate this principle by showing that kinetic proofreading, a NESS mechanism that explains the low error rates in biochemical reactions, can be effectively mimicked by a constrained periodic driving.

  15. Cavitation modeling for steady-state CFD simulations

    Science.gov (United States)

    Hanimann, L.; Mangani, L.; Casartelli, E.; Widmer, M.

    2016-11-01

    Cavitation in hydraulic turbomachines is an important phenomenon to be considered for performance predictions. Correct analysis of the cavitation onset and its effect on the flow field while diminishing the pressure level need therefore to be investigated. Even if cavitation often appears as an unsteady phenomenon, the capability to compute it in a steady state formulation for the design and assessment phase in the product development process is very useful for the engineer. In the present paper the development and corresponding application of a steady state CFD solver is presented, based on the open source toolbox OpenFOAM®. In the first part a review of different cavitation models is presented. Adopting the mixture-type cavitation approach, various models are investigated and developed in a steady state CFD RANS solver. Particular attention is given to the coupling between cavitation and turbulence models as well as on the underlying numerical procedure, especially the integration in the pressure- correction step of pressure-based solvers, which plays an important role in the stability of the procedure. The performance of the proposed model is initially assessed on simple cases available in the open literature. In a second step results for different applications are presented, ranging from airfoils to pumps.

  16. SBWR Model for Steady-State and Transient Analysis

    Directory of Open Access Journals (Sweden)

    Gilberto Espinosa-Paredes

    2008-01-01

    Full Text Available This paper presents a model of a simplified boiling water reactor (SBWR to analyze the steady-state and transient behavior. The SBWR model is based on approximations of lumped and distributed parameters to consider neutronics and natural circulation processes. The main components of the model are vessel dome, downcomer, lower plenum, core (channel and fuel, upper plenum, pressure, and level controls. Further consideration of the model is the natural circulation path in the internal circuit of the reactor, which governs the safety performance of the SBWR. To demonstrate the applicability of the model, the predictions were compared with plant data, manufacturer_s predictions, and RELAP5 under steady-state and transient conditions of a typical BWR. In steady-state conditions, the profiles of the main variables of the SBWR core such as superficial velocity, void fraction, temperatures, and convective heat transfer coefficient are presented and analyzed. The transient behavior of SBWR was analyzed during the closure of all main steam line isolation valves (MSIVs. Our results in this transient show that the cooling system due to natural circulation in the SBWR is around 70% of the rated core flow. According to the results shown here, one of the main conclusions of this work is that the simplified model could be very helpful in the licensing process.

  17. Extracting Steady State Components from Synchrophasor Data Using Kalman Filters

    Directory of Open Access Journals (Sweden)

    Farhan Mahmood

    2016-04-01

    Full Text Available Data from phasor measurement units (PMUs may be exploited to provide steady state information to the applications which require it. As PMU measurements may contain errors and missing data, the paper presents the application of a Kalman Filter technique for real-time data processing. PMU data captures the power system’s response at different time-scales, which are generated by different types of power system events; the presented Kalman Filter methods have been applied to extract the steady state components of PMU measurements that can be fed to steady state applications. Two KF-based methods have been proposed, i.e., a windowing-based KF method and “the modified KF”. Both methods are capable of reducing noise, compensating for missing data and filtering outliers from input PMU signals. A comparison of proposed methods has been carried out using the PMU data generated from a hardware-in-the-loop (HIL experimental setup. In addition, a performance analysis of the proposed methods is performed using an evaluation metric.

  18. Ideal MHD Stability of ITER Steady State Scenarios with ITBs

    Energy Technology Data Exchange (ETDEWEB)

    F.M. Poli, C.E. Kessel, S. Jardin, J. Manickam, M. Chance, J. Chen

    2011-07-27

    One of ITER goals is to demonstrate feasibility of continuous operations using non-inductive current drive. Two main candidates have been identified for advanced operations: the long duration, high neutron fluency hybrid scenario and the steady state scenario, both operating at a plasma current lower than the reference ELMy scenario [1][2] to minimize the required current drive. The steady state scenario targets plasmas with current 7-10 MA in the flat-top, 50% of which will be provided by the self-generated, pressure-driven bootstrap current. It has been estimated that, in order to obtain a fusion gain Q > 5 at a current of 9 MA, it should be ΒN > 2.5 and H > 1.5 [3]. This implies the presence of an Internal Transport Barrier (ITB). This work discusses how the stability of steady state scenarios with ITBs is affected by the external heating sources and by perturbations of the equilibrium profiles.

  19. Growth rate controls mRNA turnover in steady and non-steady states.

    Science.gov (United States)

    García-Martínez, José; Troulé, Kevin; Chávez, Sebastián; Pérez-Ortín, José E

    2016-12-01

    Gene expression has been investigated in relation with growth rate in the yeast Saccharomyces cerevisiae, following different experimental strategies. The expression of some specific gene functional categories increases or decreases with growth rate. Our recently published results have unveiled that these changes in mRNA concentration with growth depend on the relative alteration of mRNA synthesis and decay, and that, in addition to this gene-specific transcriptomic signature of growth, global mRNA turnover increases with growth rate. We discuss here these results in relation with other previous and concurrent publications, and we add new evidence which indicates that growth rate controls mRNA turnover even under non-steady-state conditions.

  20. Steady thermal stress and strain rates in a rotating circular cylinder under steady state temperature

    Directory of Open Access Journals (Sweden)

    Pankaj Thakur

    2014-01-01

    Full Text Available Thermal stress and strain rates in a thick walled rotating cylinder under steady state temperature has been derived by using Seth’s transition theory. For elastic-plastic stage, it is seen that with the increase of temperature, the cylinder having smaller radii ratios requires lesser angular velocity to become fully plastic as compared to cylinder having higher radii ratios The circumferential stress becomes larger and larger with the increase in temperature. With increase in thickness ratio stresses must be decrease. For the creep stage, it is seen that circumferential stresses for incompressible materials maximum at the internal surface as compared to compressible material, which increase with the increase in temperature and measure n.

  1. Sensitivity and specificity of auditory steady-state response testing

    Directory of Open Access Journals (Sweden)

    Camila Maia Rabelo

    2011-01-01

    Full Text Available INTRODUCTION: The ASSR test is an electrophysiological test that evaluates, among other aspects, neural synchrony, based on the frequency or amplitude modulation of tones. OBJECTIVE: The aim of this study was to determine the sensitivity and specificity of auditory steady-state response testing in detecting lesions and dysfunctions of the central auditory nervous system. METHODS: Seventy volunteers were divided into three groups: those with normal hearing; those with mesial temporal sclerosis; and those with central auditory processing disorder. All subjects underwent auditory steady-state response testing of both ears at 500 Hz and 2000 Hz (frequency modulation, 46 Hz. The difference between auditory steady-state response-estimated thresholds and behavioral thresholds (audiometric evaluation was calculated. RESULTS: Estimated thresholds were significantly higher in the mesial temporal sclerosis group than in the normal and central auditory processing disorder groups. In addition, the difference between auditory steady-state response-estimated and behavioral thresholds was greatest in the mesial temporal sclerosis group when compared to the normal group than in the central auditory processing disorder group compared to the normal group. DISCUSSION: Research focusing on central auditory nervous system (CANS lesions has shown that individuals with CANS lesions present a greater difference between ASSR-estimated thresholds and actual behavioral thresholds; ASSR-estimated thresholds being significantly worse than behavioral thresholds in subjects with CANS insults. This is most likely because the disorder prevents the transmission of the sound stimulus from being in phase with the received stimulus, resulting in asynchronous transmitter release. Another possible cause of the greater difference between the ASSR-estimated thresholds and the behavioral thresholds is impaired temporal resolution. CONCLUSIONS: The overall sensitivity of auditory steady-state

  2. Relaxation versus adiabatic quantum steady-state preparation

    Science.gov (United States)

    Venuti, Lorenzo Campos; Albash, Tameem; Marvian, Milad; Lidar, Daniel; Zanardi, Paolo

    2017-04-01

    Adiabatic preparation of the ground states of many-body Hamiltonians in the closed-system limit is at the heart of adiabatic quantum computation, but in reality systems are always open. This motivates a natural comparison between, on the one hand, adiabatic preparation of steady states of Lindbladian generators and, on the other hand, relaxation towards the same steady states subject to the final Lindbladian of the adiabatic process. In this work we thus adopt the perspective that the goal is the most efficient possible preparation of such steady states, rather than ground states. Using known rigorous bounds for the open-system adiabatic theorem and for mixing times, we are then led to a disturbing conclusion that at first appears to doom efforts to build physical quantum annealers: relaxation seems to always converge faster than adiabatic preparation. However, by carefully estimating the adiabatic preparation time for Lindbladians describing thermalization in the low-temperature limit, we show that there is, after all, room for an adiabatic speedup over relaxation. To test the analytically derived bounds for the adiabatic preparation time and the relaxation time, we numerically study three models: a dissipative quasifree fermionic chain, a single qubit coupled to a thermal bath, and the "spike" problem of n qubits coupled to a thermal bath. Via these models we find that the answer to the "which wins" question depends for each model on the temperature and the system-bath coupling strength. In the case of the "spike" problem we find that relaxation during the adiabatic evolution plays an important role in ensuring a speedup over the final-time relaxation procedure. Thus, relaxation-assisted adiabatic preparation can be more efficient than both pure adiabatic evolution and pure relaxation.

  3. The requirements of a next step large steady state tokamak

    Science.gov (United States)

    Janeschitz, G.; Barabaschi, P.; Federici, G.; Ioki, K.; Ladd, P.; Mukhovatov, V.; Sugihara, M.; Tivey, R.; ITER-JCT; Home Team

    2000-06-01

    After a decision by the ITER parties to investigate the possibility of designing a reduced cost version of ITER several possible machine layouts with different aspect ratios were studied. Relatively early in this process it became clear that there is no significant cost difference between different aspect ratios and that there is a maximum realistically possible aspect ratio for a machine with 6 m major radius and rather high plasma shaping. Following this study a machine with an intermediate aspect ratio (3.1) called the ITER Fusion Energy Advanced Tokamak (ITER FEAT) was chosen as the basis for the outline design of a reduced cost ITER. Several potential steady state scenarios can be investigated in ITER FEAT, i.e. monotonic or reversed shear at full or reduced minor radius. In addition, so-called hybrid discharges, are feasible where a mixture of inductive and non-inductive current drive as well as bootstrap current allows long pulse discharges of the order of 2500 s. The βN values and H factors required for these discharges are in the same range as those observed on present machines, which provides confidence that such discharges can be studied in ITER FEAT. However, due to uncertainties in physics knowledge, for example the current drive efficiency off-axis, it is impossible at present to generate a completely self-consistent scenario taking all boundary conditions, for example engineering or heating system constraints, into account. In addition, all of these regimes have a potential problem with divertor operation compatibility (low edge density) and with helium exhaust which has to be addressed in existing experiments. For the engineering design of the in-vessel components and for the balance of the plant there is practically no difference between inductive (500 s) and steady state operation. However, the choice of heating systems and the distribution of power between them will be strongly influenced by the envisaged steady state scenarios.

  4. On the minimum circulating power of steady state tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Itoh, K.; Itoh, S.; Fukuyama, A.; Yagi, M.

    1995-07-01

    Circulating power for the sustenance and profile control of the steady state tokamak plasmas is discussed. The simultaneous fulfillment of the MHD stability at high beta value, the improved confinement and the stationary equilibrium requires the rotation drive as well as the current drive. In addition to the current drive efficiency, the efficiency for the rotation drive is investigated. The direct rotation drive by the external torque, such as the case of beam injection, is not efficient enough. The mechanism and the magnitude of the spontaneous plasma rotation are studied. (author).

  5. Steady State Analysis of Stochastic Systems with Multiple Time Delays

    Science.gov (United States)

    Xu, W.; Sun, C. Y.; Zhang, H. Q.

    In this paper, attention is focused on the steady state analysis of a class of nonlinear dynamic systems with multi-delayed feedbacks driven by multiplicative correlated Gaussian white noises. The Fokker-Planck equations for delayed variables are at first derived by Novikov's theorem. Then, under small delay assumption, the approximate stationary solutions are obtained by the probability density approach. As a special case, the effects of multidelay feedbacks and the correlated additive and multiplicative Gaussian white noises on the response of a bistable system are considered. It is shown that the obtained analytical results are in good agreement with experimental results in Monte Carlo simulations.

  6. Steady-state grain growth in UO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Galinari, C.M.; Lameiras, F.S. [CDTN/CNEN, Belo Horizonte (Brazil)

    1998-06-05

    The authors have observed steady-state grain growth in sintered UO{sub 2} pellets of nuclear purity at 2,003 K under H{sub 2}. The behavior of the grain size distribution at different instants is consistent with the grain growth model proposed by one of the authors. The total number of grains was estimated using the Saltykov`s method, and the evolution is in accordance with the model proposed by Rhines and Craig. The parabolic growth law was observed for the mean intercept length with n = 0.4.

  7. Cluster sizes in interleaved silent steady state (ISSS) imaging.

    Science.gov (United States)

    Akrofi, Kwaku; Sutton, Bradley P; Ouyang, Cheng; Husain, Fatima T

    2011-01-01

    The effect of increasing the number of scans in the "cluster" of an interleaved silent steady state (ISSS) fMRI imaging scheme from 1 to 2, and then to 3 was examined by a fixed-effects analysis of an auditory short-term memory task with four subjects. Compared to a cluster size of 1, a cluster of 2 scans improved sensitivity at detecting brain activity and statistical power, while a cluster of 3 scans further improved statistical power but seemed not to improve sensitivity beyond that achieved with a cluster of 2 scans. The findings reveal that cluster size is a vital parameter for an ISSS imaging scheme.

  8. Quantum reciprocity conjecture for the non-equilibrium steady state

    Energy Technology Data Exchange (ETDEWEB)

    Coleman, P; Mao, W [Center for Materials Theory, Rutgers University, Piscataway, NJ 08854 (United States)

    2004-05-26

    A consideration of the lack of history dependence in the non-equilibrium steady state of a quantum system leads us to conjecture that in such a system there is a set of quantum mechanical observables whose retarded response functions are insensitive to the arrow of time, and which consequently satisfy a quantum analogue of the Onsager reciprocity relations. Systems which satisfy this conjecture can be described by an effective free energy functional. We demonstrate that the conjecture holds in a resonant level model of a multi-lead quantum dot. (letter to the editor)

  9. Quantum-classical correspondence in steady states of nonadiabatic systems

    Energy Technology Data Exchange (ETDEWEB)

    Fujii, Mikiya; Yamashita, Koichi [Department of Chemical System Engineering, School of Engineering, The University of Tokyo, Tokyo 113-8656 (Japan); CREST, JST, Tokyo 113-8656 (Japan)

    2015-12-31

    We first present nonadiabatic path integral which is exact formulation of quantum dynamics in nonadiabatic systems. Then, by applying the stationary phase approximations to the nonadiabatic path integral, a semiclassical quantization condition, i.e., quantum-classical correspondence, for steady states of nonadiabatic systems is presented as a nonadiabatic trace formula. The present quantum-classical correspondence indicates that a set of primitive hopping periodic orbits, which are invariant under time evolution in the phase space of the slow degree of freedom, should be quantized. The semiclassical quantization is then applied to a simple nonadiabatic model and accurately reproduces exact quantum energy levels.

  10. State of the Magnetotail: Steady and Bursty Magnetospheric Convection

    Science.gov (United States)

    Tanskanen, E. I.; Slavin, J. A.

    2004-12-01

    Geotail and Cluster observations are used to examine the state of the Earth's magnetotail. In this paper we are particularly interested about the plasma sheet convection and the tail "stress level". Tail static pressure (magnetic + thermal pressure) is used to characterize different convection modes, and earthward bulk velocity is used to identify burstyness of the plasma sheet. Four basic convection modes are identified: loading, unloading, steady magnetospheric convection (SMC) and continuous magnetospheric dissipation (CMD). Bulk ion velocity is used to characterize the nature of the convection in the plasma sheet during each of these states. Bursty bulk flows (BBFs) were found to be basic building blocks of the all the tail states. When solar wind drives magnetosphere over several substorm cycle (> 8 hours) the plasma sheet was observed to be highly active and non-steady. The tail stress level was studied by using magnetic and plasma measurements from four Cluster spacecraft. Tail total current was computed, and x-component of the J cross B was used as a "tail stress index". Examples of slightly and strongly stretched magnetotail will be presented and the validity of the tail stress index will be evaluated.

  11. Integrated stoichiometric, thermodynamic and kinetic modelling of steady state metabolism

    Science.gov (United States)

    Fleming, R.M.T.; Thiele, I.; Provan, G.; Nasheuer, H.P.

    2010-01-01

    The quantitative analysis of biochemical reactions and metabolites is at frontier of biological sciences. The recent availability of high-throughput technology data sets in biology has paved the way for new modelling approaches at various levels of complexity including the metabolome of a cell or an organism. Understanding the metabolism of a single cell and multi-cell organism will provide the knowledge for the rational design of growth conditions to produce commercially valuable reagents in biotechnology. Here, we demonstrate how equations representing steady state mass conservation, energy conservation, the second law of thermodynamics, and reversible enzyme kinetics can be formulated as a single system of linear equalities and inequalities, in addition to linear equalities on exponential variables. Even though the feasible set is non-convex, the reformulation is exact and amenable to large-scale numerical analysis, a prerequisite for computationally feasible genome scale modelling. Integrating flux, concentration and kinetic variables in a unified constraint-based formulation is aimed at increasing the quantitative predictive capacity of flux balance analysis. Incorporation of experimental and theoretical bounds on thermodynamic and kinetic variables ensures that the predicted steady state fluxes are both thermodynamically and biochemically feasible. The resulting in silico predictions are tested against fluxomic data for central metabolism in E. coli and compare favourably with in silico prediction by flux balance analysis. PMID:20230840

  12. Modeling steady-state methanogenic degradation of phenols in groundwater

    Science.gov (United States)

    Bekins, Barbara A.; Godsy, E. Michael; Goerlitz, Donald F.

    1993-01-01

    Field and microcosm observations of methanogenic phenolic compound degradation indicate that Monod kinetics governs the substrate disappearance but overestimates the observed biomass. In this paper we present modeling results from an ongoing multidisciplinary study of methanogenic biodegradation of phenolic compounds in a sand and gravel aquifer contaminated by chemicals and wastes used in wood treatment. Field disappearance rates of four phenols match those determined in batch microcosm studies previously performed by E.M. Godsy and coworkers. The degradation process appears to be at steady-state because even after a sustained influx over several decades, the contaminants still are disappearing in transport downgradient. The existence of a steady-state degradation profile of each substrate together with a low biomass density in the aquifer indicate that the bacteria population is exhibiting no net growth. This may be due to the oligotrophic nature of the biomass population in which utilization and growth are approximately independent of concentration for most of the concentration range. Thus a constant growth rate should exist over much of the contaminated area which may in turn be balanced by an unusually high decay or maintenance rate due to hostile conditions or predation.

  13. Classical Orbital Paramagnetism in Non-equilibrium Steady State

    Science.gov (United States)

    Deshpande, Avinash A.; Kumar, N.

    2017-09-01

    We report the results of our numerical simulation of classical-dissipative dynamics of a charged particle subjected to a non-Markovian stochastic forcing. We find that the system develops a steady-state orbital magnetic moment in the presence of a static magnetic field. Very significantly, the sign of the orbital magnetic moment turns out to be paramagnetic for our choice of parameters, varied over a wide range. This is shown specifically for the case of classical dynamics driven by a Kubo-Anderson type non-Markovian noise. Natural spatial boundary condition was imposed through (1) a soft (harmonic) confining potential, and (2) a hard potential, approximating a reflecting wall. There was no noticeable qualitative difference. What appears to be crucial to the orbital magnetic effect noticed here is the non-Markovian property of the driving noise chosen. Experimental realization of this effect on the laboratory scale, and its possible implications are briefly discussed. We would like to emphasize that the above steady-state classical orbital paramagnetic moment complements, rather than contradicts the Bohr-van Leeuwen (BvL) theorem on the absence of classical orbital diamagnetism in thermodynamic equilibrium.

  14. Transient and steady-state selection in the striatal microcircuit

    Directory of Open Access Journals (Sweden)

    Adam eTomkins

    2014-01-01

    Full Text Available Although the basal ganglia have been widely studied and implicated in signal processing and action selection, little information is known about the active role the striatal microcircuit plays in action selection in the basal ganglia-thalamo-cortical loops. To address this knowledge gap we use a large scale three dimensional spiking model of the striatum, combined with a rate coded model of the basal ganglia-thalamo-cortical loop, to asses the computational role the striatum plays in action selection. We identify a robust transient phenomena generated by the striatal microcircuit, which temporarily enhances the difference between two competing cortical inputs. We show that this transient is sufficient to modulate decision making in the basal ganglia-thalamo-cortical circuit. We also find that the transient selection originates from a novel adaptation effect in single striatal projection neurons, which is amenable to experimental testing. Finally, we compared transient selection with models implementing classical steady-state selection. We challenged both forms of model to account for recent reports of paradoxically enhanced response selection in Huntington's Disease patients. We found that steady-state selection was uniformly impaired under all simulated Huntington's conditions, but transient selection was enhanced given a sufficient Huntington's-like increase in NMDA receptor sensitivity. Thus our models provide an intriguing hypothesis for the mechanisms underlying the paradoxical cognitive improvements in manifest Huntington's patients.

  15. Steady states of the parametric rotator and pendulum

    Energy Technology Data Exchange (ETDEWEB)

    Bouzas, Antonio O, E-mail: abouzas@fis.mda.cinvestav.m [Departamento de Fisica Aplicada, CINVESTAV-IPN, Carretera Antigua a Progreso Km. 6, Apdo Postal 73 ' Cordemex' , Merida 97310, Yucatan (Mexico)

    2010-11-15

    We discuss several steady-state rotation and oscillation modes of the planar parametric rotator and pendulum with damping. We consider a general elliptic trajectory of the suspension point for both rotator and pendulum, for the latter at an arbitrary angle with gravity, with linear and circular trajectories as particular cases. We treat the damped, nonlinear equation of motion of the parametric rotator and pendulum perturbatively for small parametric excitation and damping, although our perturbative approach can be extended to other regimes as well. Our treatment involves only ordinary second-order differential equations with constant coefficients, and provides numerically accurate perturbative solutions in terms of elementary functions. Some of the steady-state rotation and oscillation modes studied here have not been discussed in the previous literature. Other well-known ones, such as parametric resonance and the inverted pendulum, are extended to elliptic parametric excitation tilted with respect to gravity. The results presented here should be accessible to advanced undergraduates, and of interest to graduate students and specialists in the field of nonlinear mechanics.

  16. Steady-state flow properties of amorphous materials

    Science.gov (United States)

    Jadhao, Vikram; O'Connor, Thomas; Robbins, Mark

    2015-03-01

    Molecular dynamics (MD) simulations are used to investigate the steady-state shear flow curves of a standard glass model: the bidisperse Lennard-Jones system. For a wide range of temperatures in the neighborhood of the glass transition temperature Tg predicted by the mode coupling theory, we compute the steady-state shear stress and viscosity as a function of the shear rate γ ˙. At temperatures near and above Tg, the stress crosses over from linear Newtonian behavior at low rates to power law shear-thinning at high rates. As T decreases below Tg, the stress shows a plateau, becoming nearly rate-independent at low γ ˙. There is a weak increase in stress that is consistent with Eyring theory for activated flow of a solid. We find that when the strain rate is reduced to extremely low values, Newtonian behavior appears once more. Insights gained from these simulations are applied to the computation of flow curves of a well-established boundary lubricant: squalane. In the elastohydrodynamic regime, squalane responds like a glassy solid with an Eyring-like response, but at low rates it has a relatively small Newtonian viscosity. Supported by the Army Research Laboratory under Grant W911NF-12-2-0022.

  17. Stationary Distribution and Thermodynamic Relation in Nonequilibrium Steady States

    KAUST Repository

    Komatsu, Teruhisa S.

    2010-01-01

    We describe our recent attempts toward statistical mechanics and thermodynamics for nonequilibrium steady states (NESS) realized, e.g., in a heat conducting system. Our first result is a simple expression of the probability distribution (of microscopic states) of a NESS. Our second result is a natural extension of the thermodynamic Clausius relation and a definition of an accompanying entropy in NESS. This entropy coincides with the normalization constant appearing in the above mentioned microscopic expression of NESS, and has an expression similar to the Shannon entropy (with a further symmetrization). The NESS entropy proposed here is a clearly defined measurable quantity even in a system with a large degrees of freedom. We numerically measure the NESS entropy in hardsphere fluid systems with a heat current, by observing energy exchange between the system and the heat baths when the temperatures of the baths are changed according to specified protocols.

  18. Manifest and Subtle Cyclic Behavior in Nonequilibrium Steady States

    CERN Document Server

    Zia, R K P; Mandal, Dibyendu; Fox-Kemper, Baylor

    2016-01-01

    Many interesting phenomena in nature are described by stochastic processes with irreversible dynamics. To model these phenomena, we focus on a master equation or a Fokker-Planck equation with rates which violate detailed balance. When the system settles in a stationary state, it will be a nonequilibrium steady state (NESS), with time independent probability distribution as well as persistent probability current loops. The observable consequences of the latter are explored. In particular, cyclic behavior of some form must be present: some are prominent and manifest, while others are more obscure and subtle. We present a theoretical framework to analyze such properties, introducing the notion of "probability angular momentum" and its distribution. Using several examples, we illustrate the manifest and subtle categories and how best to distinguish between them. These techniques can be applied to reveal the NESS nature of a wide range of systems in a large variety of areas. We illustrate with one application: var...

  19. A theory of nonequilibrium steady states in quantum chaotic systems

    Science.gov (United States)

    Wang, Pei

    2017-09-01

    Nonequilibrium steady state (NESS) is a quasistationary state, in which exist currents that continuously produce entropy, but the local observables are stationary everywhere. We propose a theory of NESS under the framework of quantum chaos. In an isolated quantum system whose density matrix follows a unitary evolution, there exist initial states for which the thermodynamic limit and the long-time limit are noncommutative. The density matrix \\hat ρ of these states displays a universal structure. Suppose that \\renewcommand{\\ket}[1]{{\\vert #1 >}} \\ketα and \\renewcommand{\\ket}[1]{{\\vert #1 >}} \\ketβ are different eigenstates of the Hamiltonian with energies E_α and E_β , respectively. \\renewcommand{\\bra}[1]{} \\braα\\hat ρ \\ketβ behaves as a random number which has zero mean. In thermodynamic limit, the variance of \\renewcommand{\\bra}[1]{} \\braα\\hat ρ \\ketβ is a smooth function of ≤ft\\vert E_α-E_β\\right\\vert , scaling as 1/≤ft\\vert E_α-E_β\\right\\vert 2 in the limit ≤ft\\vert E_α-E_β\\right\\vert \\to 0 . If and only if this scaling law is obeyed, the initial state evolves into NESS in the long time limit. We present numerical evidence of our hypothesis in a few chaotic models. Furthermore, we find that our hypothesis indicates the eigenstate thermalization hypothesis (ETH) for current operators in a bipartite system.

  20. Analysis of steady-state ductile crack growth

    DEFF Research Database (Denmark)

    Niordson, Christian

    1999-01-01

    The fracture strength under quasi-static steady-state crack growth in an elastic-plastic material joined by a laser weld is analyzed. Laser welding gives high mismatch between the yield stress within the weld and the yield stress in the base material. This is due to the fast termic cycle, which....... Both models predict that in general a thinner laser weld gives higher interface strength. Furthermore, both fracture criteria show, that the preferred path of the crack is close outside the weld material; a phenomenon also observed in experiments....... the material undergoes in welding. The elastic properties, on the other hand, are insensitive to the termic cycle, and are therefore essentially the same in the weld and in the base material. The material is described by $J_2$-flow theory, and the analysis is performed by using a numerical algorithm, in which...

  1. An Adsorption Equilibria Model for Steady State Analysis

    KAUST Repository

    Ismail, Azhar Bin

    2016-02-29

    The investigation of adsorption isotherms is a prime factor in the ongoing development of adsorption cycles for a spectrum of advanced, thermally-driven engineering applications, including refrigeration, natural gas storage, and desalination processes. In this work, a novel semi-empirical mathematical model has been derived that significantly enhances the prediction of the steady state uptake in adsorbent surfaces. This model, a combination of classical Langmuir and a novel modern adsorption isotherm equation, allows for a higher degree of regression of both energetically homogenous and heterogeneous adsorbent surfaces compared to several isolated classical and modern isotherm models, and has the ability to regress isotherms for all six types under the IUPAC classification. Using a unified thermodynamic framework, a single asymmetrical energy distribution function (EDF) has also been proposed that directly relates the mathematical model to the adsorption isotherm types. This fits well with the statistical rate theory approach and offers mechanistic insights into adsorption isotherms.

  2. Optimal operation of Petlyuk distillation: Steady-state behavior

    Directory of Open Access Journals (Sweden)

    Ivar J. Halvorsen

    2001-07-01

    Full Text Available The "Petlyuk" or "dividing-wall" or "fully thermally coupled" distillation column is an interesting alternative to the conventional cascaded binary columns for separation of multi-component mixtures. However, the industrial use has been limited, and difficulties in operation have been reported as one reason. With three product compositions controlled, the system has two degrees of freedom left for on-line optimization. We show that the steady-state optimal solution surface is quite narrow, and depends strongly on disturbances and design parameters. Thus it seems difficult to achieve the potential energy savings compared to conventional approaches without a good control strategy. We discuss candidate variables which may be used as feedback variables in order to keep the column operation close to optimal in a "self-optimizing" control scheme.

  3. Steady-State Chemotactic Response in E. coli

    CERN Document Server

    Kafri, Yariv

    2007-01-01

    The bacterium E. coli maneuvers itself to regions with high chemoattractant concentrations by performing two stereotypical moves: `runs', in which it moves in near straight lines, and `tumbles', in which it does not advance but changes direction randomly. The duration of each move is stochastic and depends upon the chemoattractant concentration experienced in the recent past. We relate this stochastic behavior to the steady-state density of a bacterium population, and we derive the latter as a function of chemoattractant concentration. In contrast to earlier treatments, here we account for the effects of temporal correlations and variable tumbling durations. A range of behaviors obtains, that depends subtly upon several aspects of the system - memory, correlation, and tumbling stochasticity in particular.

  4. Creep stresses in a spherical shell under steady state temperature

    Science.gov (United States)

    Verma, Gaurav; Rana, Puneet

    2017-10-01

    The paper investigates the problem of creep of a spherical structure under the influence of steady state temperature. The problem of creep in spherical shell is solved by using the concept of generalized strain measures and transition hypothesis given by Seth. The problem has reduced to non-linear differential equation for creep transition. This paper deals with the non-linear behaviour of spherical shell under thermal condition. The spherical shell structures are easily vulnerable to creep, shrinkage and thermal effects; a thorough understanding of their time-dependent behaviour has been fully established. The paper aims to provide thermal creep analysis to enhance the effective design and long life of shells, and a theoretical model is developed for calculating creep stresses and strains in a spherical shell with purpose. Results obtained for the problem are depicted graphically.

  5. Fast Prediction Method for Steady-State Heat Convection

    KAUST Repository

    Wáng, Yì

    2012-03-14

    A reduced model by proper orthogonal decomposition (POD) and Galerkin projection methods for steady-state heat convection is established on a nonuniform grid. It was verified by thousands of examples that the results are in good agreement with the results obtained from the finite volume method. This model can also predict the cases where model parameters far exceed the sample scope. Moreover, the calculation time needed by the model is much shorter than that needed for the finite volume method. Thus, the nonuniform POD-Galerkin projection method exhibits high accuracy, good suitability, and fast computation. It has universal significance for accurate and fast prediction. Also, the methodology can be applied to more complex modeling in chemical engineering and technology, such as reaction and turbulence. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. NASA Lewis Steady-State Heat Pipe Code Architecture

    Science.gov (United States)

    Mi, Ye; Tower, Leonard K.

    2013-01-01

    NASA Glenn Research Center (GRC) has developed the LERCHP code. The PC-based LERCHP code can be used to predict the steady-state performance of heat pipes, including the determination of operating temperature and operating limits which might be encountered under specified conditions. The code contains a vapor flow algorithm which incorporates vapor compressibility and axially varying heat input. For the liquid flow in the wick, Darcy s formula is employed. Thermal boundary conditions and geometric structures can be defined through an interactive input interface. A variety of fluid and material options as well as user defined options can be chosen for the working fluid, wick, and pipe materials. This report documents the current effort at GRC to update the LERCHP code for operating in a Microsoft Windows (Microsoft Corporation) environment. A detailed analysis of the model is presented. The programming architecture for the numerical calculations is explained and flowcharts of the key subroutines are given

  7. Liquid-liquid separation using steady-state bed coalescer

    Directory of Open Access Journals (Sweden)

    Šećerov-Sokolović Radmila M.

    2016-01-01

    Full Text Available This paper presents a literature review on the current understanding of liquid-liquid separation that is immensely widespread in practice, highlighting the steady-state bed coalescer being a good solution in various engineering application. Generally, the fibre bed coalescence has proven to be very effective separation method in the industry. Due to the complexity of bed coalescence phenomenon coalescer design and sizing procedure relies on experimental test. This review provides a research overview of the key phenomena essential for the efficient bed coalescence, such as mechanisms of droplet coalescence and emulsion flow through the fibre bed. In addition to this provides an overview of the current knowledge about coalescer´s design properties and variables such as: fluid velocity, fluid flow orientation/flow mode, fibre bed geometry, and bed length. [[Projekat Ministarstva nauke Republike Srbije, br. 172022

  8. Ising game: Nonequilibrium steady states of resource-allocation systems

    Science.gov (United States)

    Xin, C.; Yang, G.; Huang, J. P.

    2017-04-01

    Resource-allocation systems are ubiquitous in the human society. But how external fields affect the state of such systems remains poorly explored due to the lack of a suitable model. Because the behavior of spins pursuing energy minimization required by physical laws is similar to that of humans chasing payoff maximization studied in game theory, here we combine the Ising model with the market-directed resource-allocation game, yielding an Ising game. Based on the Ising game, we show theoretical, simulative and experimental evidences for a formula, which offers a clear expression of nonequilibrium steady states (NESSs). Interestingly, the formula also reveals a convertible relationship between the external field (exogenous factor) and resource ratio (endogenous factor), and a class of saturation as the external field exceeds certain limits. This work suggests that the Ising game could be a suitable model for studying external-field effects on resource-allocation systems, and it could provide guidance both for seeking more relations between NESSs and equilibrium states and for regulating human systems by choosing NESSs appropriately.

  9. Steady state quantum discord for circularly accelerated atoms

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Jiawei, E-mail: hujiawei@nbu.edu.cn [Center for Nonlinear Science and Department of Physics, Ningbo University, Ningbo, Zhejiang 315211 (China); Yu, Hongwei, E-mail: hwyu@hunnu.edu.cn [Center for Nonlinear Science and Department of Physics, Ningbo University, Ningbo, Zhejiang 315211 (China); Synergetic Innovation Center for Quantum Effects and Applications, Hunan Normal University, Changsha, Hunan 410081 (China)

    2015-12-15

    We study, in the framework of open quantum systems, the dynamics of quantum entanglement and quantum discord of two mutually independent circularly accelerated two-level atoms in interaction with a bath of fluctuating massless scalar fields in the Minkowski vacuum. We assume that the two atoms rotate synchronically with their separation perpendicular to the rotating plane. The time evolution of the quantum entanglement and quantum discord of the two-atom system is investigated. For a maximally entangled initial state, the entanglement measured by concurrence diminishes to zero within a finite time, while the quantum discord can either decrease monotonically to an asymptotic value or diminish to zero at first and then followed by a revival depending on whether the initial state is antisymmetric or symmetric. When both of the two atoms are initially excited, the generation of quantum entanglement shows a delayed feature, while quantum discord is created immediately. Remarkably, the quantum discord for such a circularly accelerated two-atom system takes a nonvanishing value in the steady state, and this is distinct from what happens in both the linear acceleration case and the case of static atoms immersed in a thermal bath.

  10. Critical Concavity of a Drainage Basin for Steady-State

    Science.gov (United States)

    Byun, Jongmin; Paik, Kyungrock

    2015-04-01

    Longitudinal profiles of natural streams are known to show concave forms. Saying A as drainage area, channel gradient S can be expressed as the power-law, S≈A-θ (Flint, 1974), which is one of the scale-invariant features of drainage basin. According to literature, θ of most natural streams falls into a narrow range (0.4 natural drainage basins?' To answer above questions, we analytically derive θ for a steady-state drainage basin following Lane's equilibrium (Lane, 1955) throughout the corridor and named this specific case as the 'critical concavity'. In the derivation, sediment transport capacity is estimated by unit stream power model (Yang, 1976), yielding a power function of upstream area. Stability of channel at a local point occurs when incoming flux equals outgoing flux at the point. Therefore, given the drainage at steady-state where all channel beds are stable, the exponent of the power function should be zero. From this, we can determine the critical concavity. Considering ranges of variables associated in this derivation, critical concavity cannot be resolved as a single definite value, rather a range of critical concavity is suggested. This range well agrees with the widely reported range of θ (0.4 natural streams. In this theoretical study, inter-relationships between power-laws such as hydraulic geometry (Leopold and Maddock, 1953), dominant discharge-drainage area (Knighton et al., 1999), and concavity, are coupled into the power-law framework of stream power sediment transport model. This allows us to explore close relationships between their power-law exponents: their relative roles and sensitivity. Detailed analysis and implications will be presented. References Flint, J. J., 1974, Stream gradient as a function of order, magnitude, and discharge, Water Resources Research, 10, 969-973. Knighton, A. D., 1999, Downstream variation in stream power, Geomorphology, 29, 293-306. Lane, E. W., 1955, The importance of fluvial morphology in hydraulic

  11. Mechanism for multiplicity of steady states with distinct cell concentration in continuous culture of mammalian cells.

    Science.gov (United States)

    Yongky, Andrew; Lee, Jongchan; Le, Tung; Mulukutla, Bhanu Chandra; Daoutidis, Prodromos; Hu, Wei-Shou

    2015-07-01

    Continuous culture for the production of biopharmaceutical proteins offers the possibility of steady state operations and thus more consistent product quality and increased productivity. Under some conditions, multiplicity of steady states has been observed in continuous cultures of mammalian cells, wherein with the same dilution rate and feed nutrient composition, steady states with very different cell and product concentrations may be reached. At those different steady states, cells may exhibit a high glycolysis flux with high lactate production and low cell concentration, or a low glycolysis flux with low lactate and high cell concentration. These different steady states, with different cell concentration, also have different productivity. Developing a mechanistic understanding of the occurrence of steady state multiplicity and devising a strategy to steer the culture toward the desired steady state is critical. We establish a multi-scale kinetic model that integrates a mechanistic intracellular metabolic model and cell growth model in a continuous bioreactor. We show that steady state multiplicity exists in a range of dilution rate in continuous culture as a result of the bistable behavior in glycolysis. The insights from the model were used to devise strategies to guide the culture to the desired steady state in the multiple steady state region. The model provides a guideline principle in the design of continuous culture processes of mammalian cells. © 2015 Wiley Periodicals, Inc.

  12. Kinematical Analysis along Maximal Lactate Steady State Swimming Intensity

    Directory of Open Access Journals (Sweden)

    Pedro Figueiredo, Rafael Nazario, Marisa Sousa, Jailton Gregório Pelarigo, João Paulo Vilas-Boas, Ricardo Fernandes

    2014-09-01

    Full Text Available The purpose of this study was to conduct a kinematical analysis during swimming at the intensity corresponding to maximal lactate steady state (MLSS. Thirteen long distance swimmers performed, in different days, an intermittent incremental protocol of n x 200 m until exhaustion and two to four 30-min submaximal constant speed bouts to determine the MLSS. The video analysis, using APAS System (Ariel Dynamics Inc., USA, allowed determining the following relevant swimming determinants (in five moments of the 30-min test: 0, 25, 50, 75, and 100%: stroke rate, stroke length, trunk incline, intracyclic velocity variation, propelling efficiency, index of coordination and the time allotted to propulsion per distance unit. An ANOVA for repeated measures was used to compare the parameters mean values along each moment of analysis. Stoke rate tended to increase and stroke length to decrease along the test; a tendency to decrease was also found for intracyclic velocity variation and propelling efficiency whereas the index of coordination and the propulsive impulse remained stable during the MLSS test. It can be concluded that the MLSS is not only an intensity to maintain without a significant increase of blood lactate concentration, but a concomitant stability for some biomechanical parameters exists (after an initial adaptation. However, efficiency indicators seem to be more sensitive to changes occurring during swimming at this threshold intensity.

  13. Steady-State Thermoelastic Analytical Solutions for Insulated Pipelines

    Directory of Open Access Journals (Sweden)

    M. Fraldi

    2016-01-01

    Full Text Available A steady-state thermoelastic analytical solution for a multilayer hollow cylinder, composed of an arbitrary number of phases and subject to both radial pressure and temperature gradient, is presented. By assuming each phase to be homogeneous and thermally isotropic and by varying the mechanical and thermal constitutive parameters, a sensitivity analysis has been performed with the aim of finally applying the study to the mechanical behaviour of an industrial pipeline composed of three phases (steel, insulating coating, and polyethylene under the action of the above-mentioned load conditions. By making reference to a classical Hencky-von Mises criterion, the stress profiles along the thickness of the layers have been carried out, also localizing the onset of plasticity as a function of the temperature variations, material properties, and geometrical features characterizing the composite structure of interest. At the end, some numerical results of practical interest in the engineering applications have been specialized to three different insulated coating materials (expanded polyurethane, laminate glass, and syntactic foam, to highlight the cases in which thermal properties and loads can significantly interfere with the mechanical response in pipes, in terms of stresses, in this way suggesting possible strategies for avoiding unexpected failure and supporting the optimal structural design of these systems.

  14. Attentional modulation of auditory steady-state responses.

    Directory of Open Access Journals (Sweden)

    Yatin Mahajan

    Full Text Available Auditory selective attention enables task-relevant auditory events to be enhanced and irrelevant ones suppressed. In the present study we used a frequency tagging paradigm to investigate the effects of attention on auditory steady state responses (ASSR. The ASSR was elicited by simultaneously presenting two different streams of white noise, amplitude modulated at either 16 and 23.5 Hz or 32.5 and 40 Hz. The two different frequencies were presented to each ear and participants were instructed to selectively attend to one ear or the other (confirmed by behavioral evidence. The results revealed that modulation of ASSR by selective attention depended on the modulation frequencies used and whether the activation was contralateral or ipsilateral. Attention enhanced the ASSR for contralateral activation from either ear for 16 Hz and suppressed the ASSR for ipsilateral activation for 16 Hz and 23.5 Hz. For modulation frequencies of 32.5 or 40 Hz attention did not affect the ASSR. We propose that the pattern of enhancement and inhibition may be due to binaural suppressive effects on ipsilateral stimulation and the dominance of contralateral hemisphere during dichotic listening. In addition to the influence of cortical processing asymmetries, these results may also reflect a bias towards inhibitory ipsilateral and excitatory contralateral activation present at the level of inferior colliculus. That the effect of attention was clearest for the lower modulation frequencies suggests that such effects are likely mediated by cortical brain structures or by those in close proximity to cortex.

  15. Attentional modulation of auditory steady-state responses.

    Science.gov (United States)

    Mahajan, Yatin; Davis, Chris; Kim, Jeesun

    2014-01-01

    Auditory selective attention enables task-relevant auditory events to be enhanced and irrelevant ones suppressed. In the present study we used a frequency tagging paradigm to investigate the effects of attention on auditory steady state responses (ASSR). The ASSR was elicited by simultaneously presenting two different streams of white noise, amplitude modulated at either 16 and 23.5 Hz or 32.5 and 40 Hz. The two different frequencies were presented to each ear and participants were instructed to selectively attend to one ear or the other (confirmed by behavioral evidence). The results revealed that modulation of ASSR by selective attention depended on the modulation frequencies used and whether the activation was contralateral or ipsilateral. Attention enhanced the ASSR for contralateral activation from either ear for 16 Hz and suppressed the ASSR for ipsilateral activation for 16 Hz and 23.5 Hz. For modulation frequencies of 32.5 or 40 Hz attention did not affect the ASSR. We propose that the pattern of enhancement and inhibition may be due to binaural suppressive effects on ipsilateral stimulation and the dominance of contralateral hemisphere during dichotic listening. In addition to the influence of cortical processing asymmetries, these results may also reflect a bias towards inhibitory ipsilateral and excitatory contralateral activation present at the level of inferior colliculus. That the effect of attention was clearest for the lower modulation frequencies suggests that such effects are likely mediated by cortical brain structures or by those in close proximity to cortex.

  16. Development of the ITER Advanced Steady State and Hybrid Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    C.E. Kessel, D. Campbell, T. Casper, Y. Gribov, and J. Snipes

    2010-09-24

    Full discharge simulations are performed to examine the plasma current rampup, flattop and rampdown phases self-consistently with the poloidal field (PF) coils and their limitations, plasma transport evolution, and heating/current drive (H/CD) sources. Steady state scenarios are found that obtain 100% non-inductive current with Ip = 7.3-10.0 MA, βN ~ 2.5 for H98 = 1.6, Q’s range from 3 to 6, n/nGr = 0.75-1.0, and NB, IC, EC, and LH source have been examined. The scenarios remain within CS/PF coil limits by advancing the pre-magnetization by 40 Wb. Hybrid scenarios have been identified with 35-40% non-inductive current for Ip = 12.5 MA, H98 ~ 1.25, with q(0) reaching 1 at or after the end of rampup. The equilibrium operating space for the hybrid shows a large range of scenarios can be accommodated, and access 925-1300 s flattop burn durations.

  17. Classical quasi-steady state reduction-A mathematical characterization

    Science.gov (United States)

    Goeke, Alexandra; Walcher, Sebastian; Zerz, Eva

    2017-04-01

    We discuss parameter dependent polynomial ordinary differential equations that model chemical reaction networks. By classical quasi-steady state (QSS) reduction we understand the following familiar (heuristically motivated) mathematical procedure: Set the rate of change for certain (a priori chosen) variables equal to zero and use the resulting algebraic equations to obtain a system of smaller dimension for the remaining variables. This procedure will generally be valid only for certain parameter ranges. We start by showing that the reduction is accurate if and only if the corresponding parameter is what we call a QSS parameter value, and that the reduction is approximately accurate if and only if the corresponding parameter is close to a QSS parameter value. The QSS parameter values can be characterized by polynomial equations and inequations, hence parameter ranges for which QSS reduction is valid are accessible in an algorithmic manner. A defining characteristic of a QSS parameter value is that the algebraic variety defined by the QSS relations is invariant for the differential equation. A closer investigation of the associated systems shows the existence of further invariant sets; here singular perturbations enter the picture in a natural manner. We compare QSS reduction and singular perturbation reduction, and show that, while they do not agree in general, they do, up to lowest order in a small parameter, for a quite large and relevant class of examples. This observation, in turn, allows the computation of QSS reductions even in cases where an explicit resolution of the polynomial equations is not possible.

  18. Attentional Modulation of Auditory Steady-State Responses

    Science.gov (United States)

    Mahajan, Yatin; Davis, Chris; Kim, Jeesun

    2014-01-01

    Auditory selective attention enables task-relevant auditory events to be enhanced and irrelevant ones suppressed. In the present study we used a frequency tagging paradigm to investigate the effects of attention on auditory steady state responses (ASSR). The ASSR was elicited by simultaneously presenting two different streams of white noise, amplitude modulated at either 16 and 23.5 Hz or 32.5 and 40 Hz. The two different frequencies were presented to each ear and participants were instructed to selectively attend to one ear or the other (confirmed by behavioral evidence). The results revealed that modulation of ASSR by selective attention depended on the modulation frequencies used and whether the activation was contralateral or ipsilateral. Attention enhanced the ASSR for contralateral activation from either ear for 16 Hz and suppressed the ASSR for ipsilateral activation for 16 Hz and 23.5 Hz. For modulation frequencies of 32.5 or 40 Hz attention did not affect the ASSR. We propose that the pattern of enhancement and inhibition may be due to binaural suppressive effects on ipsilateral stimulation and the dominance of contralateral hemisphere during dichotic listening. In addition to the influence of cortical processing asymmetries, these results may also reflect a bias towards inhibitory ipsilateral and excitatory contralateral activation present at the level of inferior colliculus. That the effect of attention was clearest for the lower modulation frequencies suggests that such effects are likely mediated by cortical brain structures or by those in close proximity to cortex. PMID:25334021

  19. Glaucoma affects steady state VEP contrast thresholds before psychophysics.

    Science.gov (United States)

    Vaegan; Rahman, Anmar M A; Sanderson, Gordon F

    2008-07-01

    Frequency doubling technology (FDT) is a recent psychophysical test for glaucoma. It measures the contrast threshold to low spatial frequency, high temporal frequency sinusoidal luminance profile bars. We wanted to confirm, with stricter controls, Vaegan and Hollow's report that contrast thresholds of steady state visual evoked potentials (ssVEPs) to a stimulus resembling the central field of the FDT test was more sensitive to glaucoma than the subjective threshold to the same stimulus and to start to optimize the technique. A double masked trial using 57 eyes of 42 subjects. Both thresholds were estimated by modified binary search. In psychophysical testing, subjects were given a two alternative forced choice task. In ssVEP testing a significant signal in any one of eight channels was deemed to be a detection. In some subjects electrode positions were compared, both eyes were tested, tests were repeated to estimate reliability, stimulus frequencies were varied or full contrast functions were obtained. Thresholds and percent abnormal increased as a function of glaucoma severity for ssVEPs but not for psychophysics. Both threshold measures were reliable. Interocular correlations were low. SsVEP amplitude against contrast functions had similar thresholds to those found by modified binary search. The data was too irregular for individual thresholds to be estimated from a fitted exponential. Amplitudes were greatest at 7 to 10 Hz, psychophysical thresholds at 18.29 Hz, when formal controls were used, as they had in a less controlled previous study at 7.14 Hz.

  20. Lithium surface operating under steady-state power load

    Energy Technology Data Exchange (ETDEWEB)

    Khripunov, B.I. E-mail: boris@nfi.kiae.ru; Petrov, V.B.; Shapkin, V.V.; Antonov, N.V.; Pleshakov, A.S.; Rupyshev, A.S.; Prokhorov, D.Yu.; Evtikhin, V.A.; Lyublinsky, I.E.; Vertkov, V.V

    2003-04-01

    A liquid lithium surface is considered for application in divertor of a fusion tokamak-reactor. Lithium surface has been realized in experimental mock-ups and its operation has been demonstrated under high power load at reactor relevant heat fluxes. Lithium targets have been developed on the basis of capillary pore structures. A vertical working surface was investigated under steady-state electron beam. The range of power loads 1-50 MW/m{sup 2} was covered by the studies. Long-duration experiments were performed on thermally stabilized targets at 1-10 MW/m{sup 2}. Evaporation was shown to be efficient mechanism of power removal and a high lithium mass loss rate was measured. Operation of the facility with plasma at 0.2 g/s of lithium flow was shown. The problem of lithium balance in divertor and SOL is discussed. Pumping of lithium is possible by solid and liquid metal wall structures in reactor conditions in the divertor channel.

  1. The physiology of submaximal exercise: The steady state concept.

    Science.gov (United States)

    Ferretti, Guido; Fagoni, Nazzareno; Taboni, Anna; Bruseghini, Paolo; Vinetti, Giovanni

    2017-12-01

    The steady state concept implies that the oxygen flow is invariant and equal at each level along the respiratory system. The same is the case with the carbon dioxide flow. This condition has several physiological consequences, which are analysed. First, we briefly discuss the mechanical efficiency of exercise and the energy cost of human locomotion, as well as the roles played by aerodynamic work and frictional work. Then we analyse the equations describing the oxygen flow in lungs and in blood, the effects of ventilation and of the ventilation - perfusion inequality, and the interaction between diffusion and perfusion in the lungs. The cardiovascular responses sustaining gas flow increase in blood are finally presented. An equation linking ventilation, circulation and metabolism is developed, on the hypothesis of constant oxygen flow in mixed venous blood. This equation tells that, if the pulmonary respiratory quotient stays invariant, any increase in metabolic rate is matched by a proportional increase in ventilation, but by a less than proportional increase in cardiac output. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Flavour fields in steady state: stress tensor and free energy

    Energy Technology Data Exchange (ETDEWEB)

    Banerjee, Avik; Kundu, Arnab [Theory Division, Saha Institute of Nuclear Physics,1/AF Bidhannagar, Kolkata- 700064 (India); Kundu, Sandipan [Department of Physics, Cornell University,Ithaca, New York, 14853 (United States)

    2016-02-16

    The dynamics of a probe brane in a given gravitational background is governed by the Dirac-Born-Infeld action. The corresponding open string metric arises naturally in studying the fluctuations on the probe. In Gauge-String duality, it is known that in the presence of a constant electric field on the worldvolume of the probe, the open string metric acquires an event horizon and therefore the fluctuation modes on the probe experience an effective temperature. In this article, we bring together various properties of such a system to a formal definition and a subsequent narration of the effective thermodynamics and the stress tensor of the corresponding flavour fields, also including a non-vanishing chemical potential. In doing so, we point out a potentially infinitely-degenerate scheme-dependence of regularizing the free energy, which nevertheless yields a universal contribution in certain cases. This universal piece appears as the coefficient of a log-divergence in free energy when a space-filling probe brane is embedded in AdS{sub d+1}-background, for d=2,4, and is related to conformal anomaly. For the special case of d=2, the universal factor has a striking resemblance to the well-known heat current formula in (1+1)-dimensional conformal field theory in steady-state, which endows a plausible physical interpretation to it. Interestingly, we observe a vanishing conformal anomaly in d=6.

  3. Quasi-steady state aerodynamics of the cheetah tail.

    Science.gov (United States)

    Patel, Amir; Boje, Edward; Fisher, Callen; Louis, Leeann; Lane, Emily

    2016-08-15

    During high-speed pursuit of prey, the cheetah (Acinonyx jubatus) has been observed to swing its tail while manoeuvring (e.g. turning or braking) but the effect of these complex motions is not well understood. This study demonstrates the potential of the cheetah's long, furry tail to impart torques and forces on the body as a result of aerodynamic effects, in addition to the well-known inertial effects. The first-order aerodynamic forces on the tail are quantified through wind tunnel testing and it is observed that the fur nearly doubles the effective frontal area of the tail without much mass penalty. Simple dynamic models provide insight into manoeuvrability via simulation of pitch, roll and yaw tail motion primitives. The inertial and quasi-steady state aerodynamic effects of tail actuation are quantified and compared by calculating the angular impulse imparted onto the cheetah's body and its shown aerodynamic effects contribute to the tail's angular impulse, especially at the highest forward velocities. © 2016. Published by The Company of Biologists Ltd.

  4. Quasi-steady state aerodynamics of the cheetah tail

    Directory of Open Access Journals (Sweden)

    Amir Patel

    2016-08-01

    Full Text Available During high-speed pursuit of prey, the cheetah (Acinonyx jubatus has been observed to swing its tail while manoeuvring (e.g. turning or braking but the effect of these complex motions is not well understood. This study demonstrates the potential of the cheetah's long, furry tail to impart torques and forces on the body as a result of aerodynamic effects, in addition to the well-known inertial effects. The first-order aerodynamic forces on the tail are quantified through wind tunnel testing and it is observed that the fur nearly doubles the effective frontal area of the tail without much mass penalty. Simple dynamic models provide insight into manoeuvrability via simulation of pitch, roll and yaw tail motion primitives. The inertial and quasi-steady state aerodynamic effects of tail actuation are quantified and compared by calculating the angular impulse imparted onto the cheetah's body and its shown aerodynamic effects contribute to the tail's angular impulse, especially at the highest forward velocities.

  5. Fast Estimation of Plant Steady State, with Application to Static RTO

    OpenAIRE

    Rodrigues, Diogo; Amrhein, Michael; Billeter, Julien; Bonvin, Dominique

    2016-01-01

    In the operation of continuous processes, many tasks require the knowledge of plant steady state at various operating points. This is for example the case in the context of kinetic modeling, response surface modeling and real-time optimization. If the computational techniques are in principle straightforward, the time needed to reach steady state represents the main limiting factor. This work proposes a novel way of speeding up the estimation of plant steady state through...

  6. Computational multiple steady states for enzymatic esterification of ethanol and oleic acid in an isothermal CSTR.

    Science.gov (United States)

    Ho, Pang-Yen; Chuang, Guo-Syong; Chao, An-Chong; Li, Hsing-Ya

    2005-05-01

    The capacity of complex biochemical reaction networks (consisting of 11 coupled non-linear ordinary differential equations) to show multiple steady states, was investigated. The system involved esterification of ethanol and oleic acid by lipase in an isothermal continuous stirred tank reactor (CSTR). The Deficiency One Algorithm and the Subnetwork Analysis were applied to determine the steady state multiplicity. A set of rate constants and two corresponding steady states are computed. The phenomena of bistability, hysteresis and bifurcation are discussed. Moreover, the capacity of steady state multiplicity is extended to the family of the studied reaction networks.

  7. An analytical description of balanced steady-state free precession with finite radio-frequency excitation.

    Science.gov (United States)

    Bieri, Oliver

    2011-02-01

    Conceptually, the only flaw in the standard steady-state free precession theory is the assumption of quasi-instantaneous radio-frequency pulses, and 10-20% signal deviations from theory are observed for common balanced steady-state free precession protocols. This discrepancy in the steady-state signal can be resolved by a simple T(2) substitution taking into account reduced transverse relaxation effects during finite radio-frequency excitation. However, finite radio-frequency effects may also affect the transient phase of balanced steady-state free precession, its contrast or its spin-echo nature and thereby have an adverse effect on common steady-state free precession magnetization preparation methods. As a result, an in-depth understanding of finite radio-frequency effects is not only of fundamental theoretical interest but also has direct practical implications. In this article, an analytical solution for balanced steady-state free precession with finite radio-frequency pulses is derived for the transient phase (under ideal conditions) and in the steady state demonstrating that balanced steady-state free precession key features are preserved but revealing an unexpected dependency of finite radio-frequency effects on relaxation times for the transient decay. Finally, the mathematical framework reveals that finite radio-frequency theory can be understood as a generalization of alternating repetition time and fluctuating equilibrium steady-state free precession sequence schemes. Copyright © 2010 Wiley-Liss, Inc.

  8. Phencyclidine Disrupts the Auditory Steady State Response in Rats.

    Directory of Open Access Journals (Sweden)

    Emma Leishman

    Full Text Available The Auditory Steady-State Response (ASSR in the electroencephalogram (EEG is usually reduced in schizophrenia (SZ, particularly to 40 Hz stimulation. The gamma frequency ASSR deficit has been attributed to N-methyl-D-aspartate receptor (NMDAR hypofunction. We tested whether the NMDAR antagonist, phencyclidine (PCP, produced similar ASSR deficits in rats. EEG was recorded from awake rats via intracranial electrodes overlaying the auditory cortex and at the vertex of the skull. ASSRs to click trains were recorded at 10, 20, 30, 40, 50, and 55 Hz and measured by ASSR Mean Power (MP and Phase Locking Factor (PLF. In Experiment 1, the effect of different subcutaneous doses of PCP (1.0, 2.5 and 4.0 mg/kg on the ASSR in 12 rats was assessed. In Experiment 2, ASSRs were compared in PCP treated rats and control rats at baseline, after acute injection (5 mg/kg, following two weeks of subchronic, continuous administration (5 mg/kg/day, and one week after drug cessation. Acute administration of PCP increased PLF and MP at frequencies of stimulation below 50 Hz, and decreased responses at higher frequencies at the auditory cortex site. Acute administration had a less pronounced effect at the vertex site, with a reduction of either PLF or MP observed at frequencies above 20 Hz. Acute effects increased in magnitude with higher doses of PCP. Consistent effects were not observed after subchronic PCP administration. These data indicate that acute administration of PCP, a NMDAR antagonist, produces an increase in ASSR synchrony and power at low frequencies of stimulation and a reduction of high frequency (> 40 Hz ASSR activity in rats. Subchronic, continuous administration of PCP, on the other hand, has little impact on ASSRs. Thus, while ASSRs are highly sensitive to NMDAR antagonists, their translational utility as a cross-species biomarker for NMDAR hypofunction in SZ and other disorders may be dependent on dose and schedule.

  9. Phencyclidine Disrupts the Auditory Steady State Response in Rats.

    Science.gov (United States)

    Leishman, Emma; O'Donnell, Brian F; Millward, James B; Vohs, Jenifer L; Rass, Olga; Krishnan, Giri P; Bolbecker, Amanda R; Morzorati, Sandra L

    2015-01-01

    The Auditory Steady-State Response (ASSR) in the electroencephalogram (EEG) is usually reduced in schizophrenia (SZ), particularly to 40 Hz stimulation. The gamma frequency ASSR deficit has been attributed to N-methyl-D-aspartate receptor (NMDAR) hypofunction. We tested whether the NMDAR antagonist, phencyclidine (PCP), produced similar ASSR deficits in rats. EEG was recorded from awake rats via intracranial electrodes overlaying the auditory cortex and at the vertex of the skull. ASSRs to click trains were recorded at 10, 20, 30, 40, 50, and 55 Hz and measured by ASSR Mean Power (MP) and Phase Locking Factor (PLF). In Experiment 1, the effect of different subcutaneous doses of PCP (1.0, 2.5 and 4.0 mg/kg) on the ASSR in 12 rats was assessed. In Experiment 2, ASSRs were compared in PCP treated rats and control rats at baseline, after acute injection (5 mg/kg), following two weeks of subchronic, continuous administration (5 mg/kg/day), and one week after drug cessation. Acute administration of PCP increased PLF and MP at frequencies of stimulation below 50 Hz, and decreased responses at higher frequencies at the auditory cortex site. Acute administration had a less pronounced effect at the vertex site, with a reduction of either PLF or MP observed at frequencies above 20 Hz. Acute effects increased in magnitude with higher doses of PCP. Consistent effects were not observed after subchronic PCP administration. These data indicate that acute administration of PCP, a NMDAR antagonist, produces an increase in ASSR synchrony and power at low frequencies of stimulation and a reduction of high frequency (> 40 Hz) ASSR activity in rats. Subchronic, continuous administration of PCP, on the other hand, has little impact on ASSRs. Thus, while ASSRs are highly sensitive to NMDAR antagonists, their translational utility as a cross-species biomarker for NMDAR hypofunction in SZ and other disorders may be dependent on dose and schedule.

  10. The study of candidate materials in steady state plasma

    Energy Technology Data Exchange (ETDEWEB)

    Khripunov, B.I. [Inst. of Nuclear Fusion, Russian Research Center ``Kurchatov Inst.``, Moscow (Russian Federation); Shapkin, V.V. [Inst. of Nuclear Fusion, Russian Research Center ``Kurchatov Inst.``, Moscow (Russian Federation); Petrov, V.B. [Inst. of Nuclear Fusion, Russian Research Center ``Kurchatov Inst.``, Moscow (Russian Federation); Antonov, N.V. [Inst. of Nuclear Fusion, Russian Research Center ``Kurchatov Inst.``, Moscow (Russian Federation)

    1995-12-31

    The choice of the materials for the ITER and future reactors first wall till now is restricted to three basic elements - carbon, beryllium, tungsten. New materials are being developed on this basis for plasma facing components. Here carbon based materials and tungsten are investigated under steady state plasma in the linear simulator LENTA. Erosion and hydrogen isotope retention are of the most interest in this study. High flux deuterium plasma is produced in beam-plasma discharge (20 kW): ion flux 10{sup 17}-10{sup 19} ion/cm{sup 2}s, electron temperature 15-30 eV, electron density up to 10{sup 13}cm{sup -3}. Ion fluence {approx}10{sup 22}ion/cm{sup 2} is achieved in several hours expositions. Bombarding ion energy is in the interval from several hundreds eV to {approx}20 eV, it can be controlled by bias voltage; this range covers the threshold values for physical sputtering and is actually of great interest. Experiments have been performed with RG-Ti, VPG, CFC Russian graphites and American POCO at 1100C. Erosion of graphites is found to be fluence dependent for values <10{sup 21}ion/cm{sup 2} and is almost constant at 10{sup 21}-10{sup 22}ion/cm{sup 2}. The erosion yield was 0.06-0.08 for all these graphites. Very low deuterium retention in RG-Ti was found. High tungsten erosion was observed in the experiments with samples biasing in the range 0-(-100)V just below the threshold value for physical sputtering by deuterium ions. (orig.).

  11. A steady-state model of the lunar ejecta cloud

    Science.gov (United States)

    Christou, Apostolos

    2014-05-01

    Every airless body in the solar system is surrounded by a cloud of ejecta produced by the impact of interplanetary meteoroids on its surface [1]. Such ``dust exospheres'' have been observed around the Galilean satellites of Jupiter [2,3]. The prospect of long-term robotic and human operations on the Moon by the US and other countries has rekindled interest on the subject [4]. This interest has culminated with the - currently ongoing - investigation of the Moon's dust exosphere by the LADEE spacecraft [5]. Here a model is presented of a ballistic, collisionless, steady state population of ejecta launched vertically at randomly distributed times and velocities and moving under constant gravity. Assuming a uniform distribution of launch times I derive closed form solutions for the probability density functions (pdfs) of the height distribution of particles and the distribution of their speeds in a rest frame both at the surface and at altitude. The treatment is then extended to particle motion with respect to a moving platform such as an orbiting spacecraft. These expressions are compared with numerical simulations under lunar surface gravity where the underlying ejection speed distribution is (a) uniform (b) a power law. I discuss the predictions of the model, its limitations, and how it can be validated against near-surface and orbital measurements.[1] Gault, D. Shoemaker, E.M., Moore, H.J., 1963, NASA TN-D 1767. [2] Kruger, H., Krivov, A.V., Hamilton, D. P., Grun, E., 1999, Nature, 399, 558. [3] Kruger, H., Krivov, A.V., Sremcevic, M., Grun, E., 2003, Icarus, 164, 170. [4] Grun, E., Horanyi, M., Sternovsky, Z., 2011, Planetary and Space Science, 59, 1672. [5] Elphic, R.C., Hine, B., Delory, G.T., Salute, J.S., Noble, S., Colaprete, A., Horanyi, M., Mahaffy, P., and the LADEE Science Team, 2014, LPSC XLV, LPI Contr. 1777, 2677.

  12. Specific determination of maximal lactate steady state in soccer players.

    Science.gov (United States)

    Loures, João P; Chamari, Karim; Ferreira, Eliel C; Campos, Eduardo Z; Zagatto, Alessandro M; Milioni, Fabio; da Silva, Adelino S R; Papoti, Marcelo

    2015-01-01

    The aim of this study was to establish the validity of the anaerobic threshold (AT) determined on the soccer-specific Hoff circuit (ATHoff) to predict the maximal lactate steady-state exercise intensity (MLSSHoff) with the ball. Sixteen soccer players (age: 16.0 ± 0.5 years; body mass: 63.7 ± 9.0 kg; and height: 169.4 ± 5.3 cm) were submitted to 5 progressive efforts (7.0-11.0 km·h) with ball dribbling. Thereafter, 11 players were submitted to 3 efforts of 30 minutes at 100, 105, and 110% of ATHoff. The ATHoff corresponded to the speed relative to 3.5 mmol·L lactate concentration. The speed relative to 4.0 mmol·L was assumed to be ATHoff4.0, and the ATHoffBI was determined through bisegmented adjustment. For comparisons, Student's t-test, intraclass correlation coefficient (ICC), and Bland and Altman analyses were used. For reproducibility, ICC, typical error, and coefficient of variation were used. No significant difference was found between AT test and retest determined using different methods. A positive correlation was observed between ATHoff and ATHoff4.0. The MLSSHoff (10.6 ± 1.3 km·h) was significantly different compared with ATHoff (10.2 ± 1.2 km·h) and ATHoffBI (9.5 ± 0.4 km·h) but did not show any difference from LAnHoff4.0 (10.7 ± 1.4 km·h). The MLSSHoff presented high ICCs with ATHoff and ATHoff4.0 (ICC = 0.94; and ICC = 0.89; p ≤ 0.05, respectively), without significant correlation with ATHoffBI. The results suggest that AT determined on the Hoff circuit is reproducible and capable of predicting MLSS. The ATHoff4.0 was the method that presented a better approximation to MLSS. Therefore, it is possible to assess submaximal physiological variables through a specific circuit performed with the ball in young soccer players.

  13. Determining Steady-state Tissue Residues for Invertebrates in Contaminated Sediment

    Science.gov (United States)

    2010-05-01

    ER D C/ EL T R -1 0 -2 Dredging Operations and Environmental Research Program Determining Steady-state Tissue Residues for Invertebrates ...2010 Determining Steady-state Tissue Residues for Invertebrates in Contaminated Sediment Alan J. Kennedy, Guilherme R. Lotufo, Jeffery A. Steevens...involves quantification of compounds in tissues via laboratory bioaccumulation exposures of benthic invertebrates . However, the standard 28-day expo

  14. The steady state of a particle in a vibrating box and possible ...

    Indian Academy of Sciences (India)

    In particular, the parameter range is found in which the particle oscillates between the walls in steady state as if the wall was static and it is showed that for these parameter ranges the particle settles to this steady state for all initial conditions. It is proposed that this phenomenon can be used to bunch charged particles in ...

  15. 40 CFR 86.1362-2007 - Steady-state testing with a ramped-modal cycle.

    Science.gov (United States)

    2010-07-01

    ... Exhaust Test Procedures § 86.1362-2007 Steady-state testing with a ramped-modal cycle. This section... testing the engine on a dynamometer with the following ramped-modal duty cycle to determine whether it... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Steady-state testing with a ramped...

  16. Universal, computer facilitated, steady state oscillator, closed loop analysis theory and some applications to precision oscillators

    Science.gov (United States)

    Parzen, Benjamin

    1992-01-01

    The theory of oscillator analysis in the immittance domain should be read in conjunction with the additional theory presented here. The combined theory enables the computer simulation of the steady state oscillator. The simulation makes the calculation of the oscillator total steady state performance practical, including noise at all oscillator locations. Some specific precision oscillators are analyzed.

  17. A steady-state target calculation method based on "point" model for integrating processes.

    Science.gov (United States)

    Pang, Qiang; Zou, Tao; Zhang, Yanyan; Cong, Qiumei

    2015-05-01

    Aiming to eliminate the influences of model uncertainty on the steady-state target calculation for integrating processes, this paper presented an optimization method based on "point" model and a method determining whether or not there is a feasible solution of steady-state target. The optimization method resolves the steady-state optimization problem of integrating processes under the framework of two-stage structure, which builds a simple "point" model for the steady-state prediction, and compensates the error between "point" model and real process in each sampling interval. Simulation results illustrate that the outputs of integrating variables can be restricted within the constraints, and the calculation errors between actual outputs and optimal set-points are small, which indicate that the steady-state prediction model can predict the future outputs of integrating variables accurately. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

  18. Quasi-steady state conditions in heterogeneous aquifers during pumping tests

    Science.gov (United States)

    Zha, Yuanyuan; Yeh, Tian-Chyi J.; Shi, Liangsheng; Huang, Shao-Yang; Wang, Wenke; Wen, Jet-Chau

    2017-08-01

    Classical Thiem's well hydraulic theory, other aquifer test analyses, and flow modeling efforts often assume the existence of ;quasi-steady; state conditions. That is, while drawdowns due to pumping continue to grow, the hydraulic gradient in the vicinity of the pumping well does not change significantly. These conditions have built upon two-dimensional and equivalent homogeneous conceptual models, but few field data have been available to affirm the existence of these conditions. Moreover, effects of heterogeneity and three-dimensional flow on this quasi-steady state concept have not been thoroughly investigated and discussed before. In this study, we first present a quantitative definition of quasi-steady state (or steady-shape conditions) and steady state conditions based on the analytical solution of two- or three-dimensional flow induced by pumping in unbounded, homogeneous aquifers. Afterward, we use a stochastic analysis to investigate the influence of heterogeneity on the quasi-steady state concept in heterogeneous aquifers. The results of the analysis indicate that the time to reach an approximate quasi-steady state in a heterogeneous aquifer could be quite different from that estimated based on a homogeneous model. We find that heterogeneity of aquifer properties, especially hydraulic conductivity, impedes the development of the quasi-steady state condition before the flow reaching steady state. Finally, 280 drawdown-time data from the hydraulic tomographic survey conducted at a field site corroborate our finding that the quasi-steady state condition likely would not take place in heterogeneous aquifers unless pumping tests last a long period. Research significance (1) Approximate quasi-steady and steady state conditions are defined for two- or three-dimensional flow induced by pumping in unbounded, equivalent homogeneous aquifers. (2) Analysis demonstrates effects of boundary condition, well screen interval, and heterogeneity of parameters on the

  19. Action-at-a-distance electrodynamics in quasi-steady-state cosmology

    Indian Academy of Sciences (India)

    -state model and demonstrates that it admits full retarded and not advanced solution. Thus, quasi-steady-state cosmology (QSSC) satisfies this necessary condition for a correct cosmological model, based on action-at-a-distance formulation.

  20. Classical memoryless noise-induced maximally discordant mixed separable steady states

    Energy Technology Data Exchange (ETDEWEB)

    Altintas, Ferdi; Kurt, Arzu [Department of Physics, Abant Izzet Baysal University, Bolu, 14280 (Turkey); Eryigit, Resul, E-mail: resul@ibu.edu.tr [Department of Physics, Abant Izzet Baysal University, Bolu, 14280 (Turkey)

    2012-12-03

    We have investigated the dynamics of quantum discord and entanglement for two qubits subject to independent global transverse and/or longitudinal memoryless noisy classical fields. Global transverse and/or longitudinal random fields are found to drive the system to maximally discordant mixed separable steady states for suitable initial conditions. Moreover, two independent noises in the system are found to enhance both the steady state randomness and quantum discord in the absence of entanglement for some initial states.

  1. Relaxation, multiplicity of steady states, and autooscillations in kinetics of catalytic reactions

    Energy Technology Data Exchange (ETDEWEB)

    Kol`tsov, N.I.; Fedotov, V.Kh.; Alekseev, B.V. [Chuvash State Univ., Chuvashia (Russian Federation)

    1995-01-01

    A review of the authors` recent findings of researche into steady-state and non-steady-state catalytic reactions is given. The method for the estimation of relaxation times for particular reaction classes is generalized. Basic critical phenomena, such as the multiplicity of steady states, are discussed in terms of the structures of reaction schemes. Mechanisms of simplest catalytic oscillators are systematized. The results outlined in this paper are shown to reflect close relations between relaxation characteristics and complex critical phenomena, which are peculiar to catalytic reactions. The discussion is held within the framework of the mass action law.

  2. LHCD during current ramp experiments on Alcator C-Mod

    Science.gov (United States)

    Wallace, G. M.; Poli, F.; Chilenski, M. A.; Hughes, J. W.; Mumgaard, R. T.; Scott, S. D.; Shiraiwa, S.; Wukitch, S. J.

    2017-10-01

    The lower hybrid current drive (LHCD) system on Alcator C-Mod is capable of sustaining fully non-inductive discharges for multiple current relaxation times (τcr ˜ 200 ms) at line averaged densities in the range of 5x1019 m-3. Some of these non-inductive discharges develop unstable MHD modes that can greatly reduce current drive performance, particularly in discharges with plasma current of 0.5 MA or less [1,2]. Avoiding these unstable MHD modes motivated an experiment to test if the stable current profile shape of a higher current non-inductive discharge could be achieved in a lower current discharge. Starting from a discharge at 0.8 MA, the plasma current was ramped down to 0.5 MA over 200 ms. The surface voltage of the plasma swings negative during the ramp, with the loop voltage reversal impacting the edge fast electron measurements immediately. Little change can be seen during the Ip ramp in the core fast electron measurements, indicating that the loop voltage reversal does not penetrate fully to the magnetic axis on the timescale of the current ramp. The resulting discharge did not exhibit deleterious MHD instabilities, however the existence of this one discharge does not necessarily represent a robust solution to the problem.

  3. LHCD during current ramp experiments on Alcator C-Mod

    Directory of Open Access Journals (Sweden)

    Wallace G.M.

    2017-01-01

    Full Text Available The lower hybrid current drive (LHCD system on Alcator C-Mod is capable of sustaining fully non-inductive discharges for multiple current relaxation times (τcr ∼ 200 ms at line averaged densities in the range of 5x1019 m-3. Some of these non-inductive discharges develop unstable MHD modes that can greatly reduce current drive performance, particularly in discharges with plasma current of 0.5 MA or less [1,2]. Avoiding these unstable MHD modes motivated an experiment to test if the stable current profile shape of a higher current non-inductive discharge could be achieved in a lower current discharge. Starting from a discharge at 0.8 MA, the plasma current was ramped down to 0.5 MA over 200 ms. The surface voltage of the plasma swings negative during the ramp, with the loop voltage reversal impacting the edge fast electron measurements immediately. Little change can be seen during the Ip ramp in the core fast electron measurements, indicating that the loop voltage reversal does not penetrate fully to the magnetic axis on the timescale of the current ramp. The resulting discharge did not exhibit deleterious MHD instabilities, however the existence of this one discharge does not necessarily represent a robust solution to the problem.

  4. Multiplicity of steady states in glycolysis and shift of metabolic state in cultured mammalian cells.

    Science.gov (United States)

    Mulukutla, Bhanu Chandra; Yongky, Andrew; Grimm, Simon; Daoutidis, Prodromos; Hu, Wei-Shou

    2015-01-01

    Cultured mammalian cells exhibit elevated glycolysis flux and high lactate production. In the industrial bioprocesses for biotherapeutic protein production, glucose is supplemented to the culture medium to sustain continued cell growth resulting in the accumulation of lactate to high levels. In such fed-batch cultures, sometimes a metabolic shift from a state of high glycolysis flux and high lactate production to a state of low glycolysis flux and low lactate production or even lactate consumption is observed. While in other cases with very similar culture conditions, the same cell line and medium, cells continue to produce lactate. A metabolic shift to lactate consumption has been correlated to the productivity of the process. Cultures that exhibited the metabolic shift to lactate consumption had higher titers than those which didn't. However, the cues that trigger the metabolic shift to lactate consumption state (or low lactate production state) are yet to be identified. Metabolic control of cells is tightly linked to growth control through signaling pathways such as the AKT pathway. We have previously shown that the glycolysis of proliferating cells can exhibit bistability with well-segregated high flux and low flux states. Low lactate production (or lactate consumption) is possible only at a low glycolysis flux state. In this study, we use mathematical modeling to demonstrate that lactate inhibition together with AKT regulation on glycolysis enzymes can profoundly influence the bistable behavior, resulting in a complex steady-state topology. The transition from the high flux state to the low flux state can only occur in certain regions of the steady state topology, and therefore the metabolic fate of the cells depends on their metabolic trajectory encountering the region that allows such a metabolic state switch. Insights from such switch behavior present us with new means to control the metabolism of mammalian cells in fed-batch cultures.

  5. A twin study of the trough plasma steady-state concentration of metformin

    DEFF Research Database (Denmark)

    Stage, Tore B; Damkier, Per; Pedersen, Rasmus S

    2015-01-01

    OBJECTIVE: The aim of this study was to determine the intrapair similarity in trough steady-state plasma concentrations of metformin in monozygotic and dizygotic twin pairs. METHODS: We included 16 twin pairs (eight monozygotic and eight dizygotic twin pairs) for this study after contacting 524...... twin pairs. They were dosed with metformin to steady state (1 g twice daily) for 6 days and on day 7, the trough concentration of metformin was determined 12 h after the last dose. RESULTS: There was no strong intrapair similarity in trough steady-state plasma concentrations of metformin in either...... dizygotic or monozygotic twin pairs. CONCLUSION: The trough steady-state plasma concentration of metformin does not appear to be tightly genetically regulated. The interpretation of this finding is limited by the small sample size....

  6. Navier-Stokes Predictions of Dynamic Stability Derivatives: Evaluation of Steady-State Methods

    National Research Council Canada - National Science Library

    DeSpirito, James; Silton, Sidra I; Weinacht, Paul

    2008-01-01

    The prediction of the dynamic stability derivatives-roll-damping, Magnus, and pitch-damping moments-were evaluated for three spin-stabilized projectiles using steady-state computational fluid dynamic (CFD) calculations...

  7. Prediction of elemental creep. [steady state and cyclic data from regression analysis

    Science.gov (United States)

    Davis, J. W.; Rummler, D. R.

    1975-01-01

    Cyclic and steady-state creep tests were performed to provide data which were used to develop predictive equations. These equations, describing creep as a function of stress, temperature, and time, were developed through the use of a least squares regression analyses computer program for both the steady-state and cyclic data sets. Comparison of the data from the two types of tests, revealed that there was no significant difference between the cyclic and steady-state creep strains for the L-605 sheet under the experimental conditions investigated (for the same total time at load). Attempts to develop a single linear equation describing the combined steady-state and cyclic creep data resulted in standard errors of estimates higher than obtained for the individual data sets. A proposed approach to predict elemental creep in metals uses the cyclic creep equation and a computer program which applies strain and time hardening theories of creep accumulation.

  8. Analytical solutions for transient and steady state beam loading in arbitrary traveling wave accelerating structures

    CERN Document Server

    Lunin, Andrei; Grudiev, Alexej

    2011-01-01

    Analytical solutions are derived for transient and steady state gradient distributions in the travelling wave accelerating structures with arbitrary variation of parameters over the structure length. The results of both the unloaded and beam loaded cases are presented.

  9. Dynamic Effects Related to Steady-State Multiplicity in Continous Saccharomyces Cerevisiae Cultivations

    DEFF Research Database (Denmark)

    Lei, Frede; Olsson, Lisbeth; Jørgensen, Sten Bay

    2004-01-01

    stepwise changed or a rampwise increased ethanol setpoint, i.e., an accelero-productostat. The transient responses from chemostat and productostat experiments were interpreted using a simple metabolic flux model. In a productostat it was possible to obtain oxido-reductive steady states at dilution rates...... of dilution rates where steady-state multiplicity can be obtained differs depending on the operation mode and that this dilution rate multiplicity range may appear larger in a productostat than in a chemostat. A more narrow multiplicity range, however, was obtained when the productostat was operated...... far below D-crit due to a strong repression of the respiratory system. However, these steady states could not be obtained in a chemostat, since a dilution rate shift-down from an oxido-reductive steady state led to a derepression of the respiratory system. It can therefore be concluded that the range...

  10. Research on Steady States of Fuzzy Cognitive Map and its Application in Three-Rivers Ecosystem

    Directory of Open Access Journals (Sweden)

    Zhen Peng

    2016-01-01

    Full Text Available Fuzzy Cognitive Map (FCM offers many advantages such intuitive knowledge representation and fast numerical reasoning ability, etc. It suits modeling and decision-making of dynamic systems. With the aims to effectively help to analyze and control system sustainable evolution, the paper defines the steady states of fixed point and limited cycle of a FCM modeling system. Accordingly, the rules of steady states of the FCM model and the factors influencing the steady states are presented and proved. The Three-Rivers represents a system including population, ecological environment, social development and their relationships. Based on the relationships, the Three-Rivers ecosystem is modeled by FCM and the Three-Rivers ecosystemsustainable evolutionis analyzed bythe rules of the steady states of FCM.

  11. Bioaccumulation factors and the steady state assumption for cesium isotopes in aquatic foodwebs near nuclear facilities.

    Science.gov (United States)

    Rowan, D J

    2013-07-01

    Steady state approaches, such as transfer coefficients or bioaccumulation factors, are commonly used to model the bioaccumulation of (137)Cs in aquatic foodwebs from routine operations and releases from nuclear generating stations and other nuclear facilities. Routine releases from nuclear generating stations and facilities, however, often consist of pulses as liquid waste is stored, analyzed to ensure regulatory compliance and then released. The effect of repeated pulse releases on the steady state assumption inherent in the bioaccumulation factor approach has not been evaluated. In this study, I examine the steady state assumption for aquatic biota by analyzing data for two cesium isotopes in the same biota, one isotope in steady state (stable (133)Cs) from geologic sources and the other released in pulses ((137)Cs) from reactor operations. I also compare (137)Cs bioaccumulation factors for similar upstream populations from the same system exposed solely to weapon test (137)Cs, and assumed to be in steady state. The steady state assumption appears to be valid for small organisms at lower trophic levels (zooplankton, rainbow smelt and 0+ yellow perch) but not for older and larger fish at higher trophic levels (walleye). Attempts to account for previous exposure and retention through a biokinetics approach had a similar effect on steady state, upstream and non-steady state, downstream populations of walleye, but were ineffective in explaining the more or less constant deviation between fish with steady state exposures and non-steady state exposures of about 2-fold for all age classes of walleye. These results suggest that for large, piscivorous fish, repeated exposure to short duration, pulse releases leads to much higher (137)Cs BAFs than expected from (133)Cs BAFs for the same fish or (137)Cs BAFs for similar populations in the same system not impacted by reactor releases. These results suggest that the steady state approach should be used with caution in any

  12. Phase Space Analysis of a Gravitationally-Induced, Steady-State Nonequilibrium

    Energy Technology Data Exchange (ETDEWEB)

    Sheehan, D.P.; Tobe, R. [Univ. of San Diego, CA (United States). Dept. of Physics; Glick, J.; Langton, J.A.; Gagliardi, M. [Univ. of San Diego, CA (United States). Dept. of Mathematics and Computer Science; Duncan, T. [Portland State Univ., OR (United States). Center for Science Ed.

    2002-04-01

    Recently a new type of pressure gradient was introduced, a gravitationally-induced, dynamically-maintained, steady-state pressure gradient (GDSPG). In this paper, three dimensional numerical test particle simulations detail its phase space structure. These verify the underlying physical mechanism originally hypothesized for its operation and support key assumptions upon which it is based. The GDSPG appears to be a member of a more general class of steady-state nonequilibrium systems that arise under extreme thermodynamic conditions.

  13. Steady-state particle tracking in the object-oriented regional groundwater model ZOOMQ3D

    OpenAIRE

    Jackson, C.R.

    2002-01-01

    This report describes the development of a steady-state particle tracking code for use in conjunction with the object-oriented regional groundwater flow model, ZOOMQ3D (Jackson, 2001). Like the flow model, the particle tracking software, ZOOPT, is written using an object-oriented approach to promote its extensibility and flexibility. ZOOPT enables the definition of steady-state pathlines in three dimensions. Particles can be tracked in both the forward and reverse directions en...

  14. Finite element modelling of creep process - steady state stresses and strains

    Directory of Open Access Journals (Sweden)

    Sedmak Aleksandar S.

    2014-01-01

    Full Text Available Finite element modelling of steady state creep process has been described. Using an analogy of visco-plastic problem with a described procedure, the finite element method has been used to calculate steady state stresses and strains in 2D problems. An example of application of such a procedure have been presented, using real life problem - cylindrical pipe with longitudinal crack at high temperature, under internal pressure, and estimating its residual life, based on the C*integral evaluation.

  15. Two Dimensional Steady State Eddy Current Analysis of a Spinning Conducting Cylinder

    Science.gov (United States)

    2017-03-09

    Magnetic Reynold’s number COMSOL 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT SAR 18. NUMBER OF PAGES 21 19a...steady-state condition. The steady state analysis was conducted using COMSOL . Once a transient analysis reaches equilibrium, the response should match...Approved for public release; distribution is unlimited. UNCLASSIFIED 3 The finite element package of COMSOL Multiphysics was used to expand the

  16. Illustrating the Steady-State Condition and the Single-Molecule Kinetic Method with the NMDA Receptor

    Science.gov (United States)

    Kosman, Daniel J.

    2009-01-01

    The steady-state is a fundamental aspect of biochemical pathways in cells; indeed, the concept of steady-state is a definition of life itself. In a simple enzyme kinetic scheme, the steady-state condition is easy to define analytically but experimentally often difficult to capture because of its evanescent quality; the initial, constant velocity…

  17. An Efficient Steady-State Analysis Method for Large Boolean Networks with High Maximum Node Connectivity.

    Science.gov (United States)

    Hong, Changki; Hwang, Jeewon; Cho, Kwang-Hyun; Shin, Insik

    2015-01-01

    Boolean networks have been widely used to model biological processes lacking detailed kinetic information. Despite their simplicity, Boolean network dynamics can still capture some important features of biological systems such as stable cell phenotypes represented by steady states. For small models, steady states can be determined through exhaustive enumeration of all state transitions. As the number of nodes increases, however, the state space grows exponentially thus making it difficult to find steady states. Over the last several decades, many studies have addressed how to handle such a state space explosion. Recently, increasing attention has been paid to a satisfiability solving algorithm due to its potential scalability to handle large networks. Meanwhile, there still lies a problem in the case of large models with high maximum node connectivity where the satisfiability solving algorithm is known to be computationally intractable. To address the problem, this paper presents a new partitioning-based method that breaks down a given network into smaller subnetworks. Steady states of each subnetworks are identified by independently applying the satisfiability solving algorithm. Then, they are combined to construct the steady states of the overall network. To efficiently apply the satisfiability solving algorithm to each subnetwork, it is crucial to find the best partition of the network. In this paper, we propose a method that divides each subnetwork to be smallest in size and lowest in maximum node connectivity. This minimizes the total cost of finding all steady states in entire subnetworks. The proposed algorithm is compared with others for steady states identification through a number of simulations on both published small models and randomly generated large models with differing maximum node connectivities. The simulation results show that our method can scale up to several hundreds of nodes even for Boolean networks with high maximum node connectivity. The

  18. Critical loads and steady-state chemistry for streams in the state of Maryland.

    Science.gov (United States)

    Sverdrup, H; Warfvinge, P; Rabenhorst, M; Janicki, A; Morgan, R; Bowman, M

    1992-01-01

    The critical loads to streams, steady-state stream chemistry and catchment chemical weathering rate in 73 catchments has been determined in the state of Maryland, USA. It was calculated with the PROFILE model from chemical limits for biological indicators, soil mineralogy, soil texture, annual average temperature, average soil moisture, net long-term uptake of base cations and nitrogen to the vegetation, annual precipitation and runoff and deposition of sulphur and nitrogen precursors of acid deposition. The results show a full range of critical loads from very low values in the sensitive catchments of western Maryland and the Coastal Plain on the Chesapeake Bay, to insensitive catchments in the Fredrick Valley and Ridge and the Piedmont plain. The critical loads will be used as an input to an integrated regional assessment of the quantitative sensitivity of streams to acid rain, and the assessment of regional stream alkalinity response to different abatement strategies. The mapping of steady-state stream chemistry indicates that streams in Maryland are still acidfying under the present deposition load. Land-use seems to play an important role in maintaining neutral pH in many of the streams of Maryland.

  19. Bringing short-lived dissipative Kerr soliton states in microresonators into a steady state

    CERN Document Server

    Brasch, Victor; Pfeiffer, Martin H P; Kippenberg, Tobias J

    2016-01-01

    Dissipative Kerr solitons have recently been generated in optical microresonators, enabling ultrashort optical pulses at microwave repetition rates, that constitute coherent and numerically predictable Kerr frequency combs. However, the seeding and excitation of the temporal solitons is associated with changes in the intracavity power, that can lead to large thermal resonance shifts during the excitation process and render the soliton states in most commonly used resonator platforms short lived. Here we describe a "power kicking" method to overcome this instability by modulating the power of the pump laser. A fast modulation triggers the soliton formation, while a slow adjustment of the power compensates the thermal effect during the excitation laser scan. With this method also initially very short-lived (100ns) soliton states , as encountered in SiN integrated photonic microresonators, can be brought into a steady state in contrast to techniques reported earlier which relied on an adjustment of the laser sca...

  20. Design of the klystron filament power supply control system for EAST LHCD

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Zege; Wang, Mao; Hu, Huaichuan; Ma, Wendong; Zhou, Taian; Zhou, Faxin; Liu, Fukun; Shan, Jiafang [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China)

    2016-09-15

    A filament is a critical component of the klystron used to heat the cathode. There are totally 44 klystrons in experimental advanced superconducting tokamak (EAST) lower hybrid current drive (LHCD) systems. All klystron filaments are powered by AC power suppliers through isolated transformers. In order to achieve better klystron preheat, a klystron filament power supply control system is designed to obtain the automatic control of all filament power suppliers. Klystron filament current is measured by PLC and the interlock between filament current and klystron high voltage system is also implemented. This design has already been deployed in two LHCD systems and proves feasible completely.

  1. Steady state analysis of Boolean molecular network models via model reduction and computational algebra.

    Science.gov (United States)

    Veliz-Cuba, Alan; Aguilar, Boris; Hinkelmann, Franziska; Laubenbacher, Reinhard

    2014-06-26

    A key problem in the analysis of mathematical models of molecular networks is the determination of their steady states. The present paper addresses this problem for Boolean network models, an increasingly popular modeling paradigm for networks lacking detailed kinetic information. For small models, the problem can be solved by exhaustive enumeration of all state transitions. But for larger models this is not feasible, since the size of the phase space grows exponentially with the dimension of the network. The dimension of published models is growing to over 100, so that efficient methods for steady state determination are essential. Several methods have been proposed for large networks, some of them heuristic. While these methods represent a substantial improvement in scalability over exhaustive enumeration, the problem for large networks is still unsolved in general. This paper presents an algorithm that consists of two main parts. The first is a graph theoretic reduction of the wiring diagram of the network, while preserving all information about steady states. The second part formulates the determination of all steady states of a Boolean network as a problem of finding all solutions to a system of polynomial equations over the finite number system with two elements. This problem can be solved with existing computer algebra software. This algorithm compares favorably with several existing algorithms for steady state determination. One advantage is that it is not heuristic or reliant on sampling, but rather determines algorithmically and exactly all steady states of a Boolean network. The code for the algorithm, as well as the test suite of benchmark networks, is available upon request from the corresponding author. The algorithm presented in this paper reliably determines all steady states of sparse Boolean networks with up to 1000 nodes. The algorithm is effective at analyzing virtually all published models even those of moderate connectivity. The problem for

  2. Mimicking Nonequilibrium Steady States with Time-Periodic Driving

    Science.gov (United States)

    2016-08-29

    biochemical reactions , can be effectively mimicked by a constrained periodic driving. DOI: 10.1103/PhysRevX.6.021022 Subject Areas: Statistical...error rates in biochemical reactions such as protein synthesis. The system in kinetic proofreading is described by a discrete-state continuous-time... concentrations are constantly maintained out of equilibrium. Such a coupling modifies the Arrhenius rates : Denoting the rate matrix now by R (as it is not

  3. The Markov process admits a consistent steady-state thermodynamic formalism

    Science.gov (United States)

    Peng, Liangrong; Zhu, Yi; Hong, Liu

    2018-01-01

    The search for a unified formulation for describing various non-equilibrium processes is a central task of modern non-equilibrium thermodynamics. In this paper, a novel steady-state thermodynamic formalism was established for general Markov processes described by the Chapman-Kolmogorov equation. Furthermore, corresponding formalisms of steady-state thermodynamics for the master equation and Fokker-Planck equation could be rigorously derived in mathematics. To be concrete, we proved that (1) in the limit of continuous time, the steady-state thermodynamic formalism for the Chapman-Kolmogorov equation fully agrees with that for the master equation; (2) a similar one-to-one correspondence could be established rigorously between the master equation and Fokker-Planck equation in the limit of large system size; (3) when a Markov process is restrained to one-step jump, the steady-state thermodynamic formalism for the Fokker-Planck equation with discrete state variables also goes to that for master equations, as the discretization step gets smaller and smaller. Our analysis indicated that general Markov processes admit a unified and self-consistent non-equilibrium steady-state thermodynamic formalism, regardless of underlying detailed models.

  4. Photophysics of Nile red in solution. Steady state spectroscopy

    Science.gov (United States)

    Ghoneim, Nagwa

    2000-04-01

    Spectroscopic properties of Nile red (NR) in organic solvents, binary solvent mixtures have been studied. Remarkable shifts in the emission band positions have been observed as a function of the polarity of the medium. In solvent mixtures, these shifts can be explained by the process of specific solvation known as dielectric enrichment. The displacement of the fluorescence band was also measured as a function of temperature to obtain the thermochromic shifts (15 cm -1 K -1 in methyltetrahydrofuran and 13.8 cm -1 K -1 in butanol). Excited state dipole moments were calculated from these shifts.

  5. The Effects of High Intensity Interval Training vs Steady State Training on Aerobic and Anaerobic Capacity.

    Science.gov (United States)

    Foster, Carl; Farland, Courtney V; Guidotti, Flavia; Harbin, Michelle; Roberts, Brianna; Schuette, Jeff; Tuuri, Andrew; Doberstein, Scott T; Porcari, John P

    2015-12-01

    High intensity interval training (HIIT) has become an increasingly popular form of exercise due to its potentially large effects on exercise capacity and small time requirement. This study compared the effects of two HIIT protocols vs steady-state training on aerobic and anaerobic capacity following 8-weeks of training. Fifty-five untrained college-aged subjects were randomly assigned to three training groups (3x weekly). Steady-state (n = 19) exercised (cycle ergometer) 20 minutes at 90% of ventilatory threshold (VT). Tabata (n = 21) completed eight intervals of 20s at 170% VO2max/10s rest. Meyer (n = 15) completed 13 sets of 30s (20 min) @ 100% PVO2 max/ 60s recovery, average PO = 90% VT. Each subject did 24 training sessions during 8 weeks. There were significant (p training group, as well as significant increases in peak (+8, + 9 and +5%) & mean (+4, +7 and +6%) power during Wingate testing, but no significant differences between groups. Measures of the enjoyment of the training program indicated that the Tabata protocol was significantly less enjoyable (p training in sedentary young adults. Key pointsSteady state training equivalent to HIIT in untrained studentsMild interval training presents very similar physiologic challenge compared to steady state trainingHIIT (particularly very high intensity variants were less enjoyable than steady state or mild interval trainingEnjoyment of training decreases across the course of an 8 week experimental training program.

  6. Lactate and acrylate metabolism by Megasphaera elsdenii under batch and steady-state conditions.

    Science.gov (United States)

    Prabhu, Rupal; Altman, Elliot; Eiteman, Mark A

    2012-12-01

    The growth of Megasphaera elsdenii on lactate with acrylate and acrylate analogues was studied under batch and steady-state conditions. Under batch conditions, lactate was converted to acetate and propionate, and acrylate was converted into propionate. Acrylate analogues 2-methyl propenoate and 3-butenoate containing a terminal double bond were similarly converted into their respective saturated acids (isobutyrate and butyrate), while crotonate and lactate analogues 3-hydroxybutyrate and (R)-2-hydroxybutyrate were not metabolized. Under carbon-limited steady-state conditions, lactate was converted to acetate and butyrate with no propionate formed. As the acrylate concentration in the feed was increased, butyrate and hydrogen formation decreased and propionate was increasingly generated, while the calculated ATP yield was unchanged. M. elsdenii metabolism differs substantially under batch and steady-state conditions. The results support the conclusion that propionate is not formed during lactate-limited steady-state growth because of the absence of this substrate to drive the formation of lactyl coenzyme A (CoA) via propionyl-CoA transferase. Acrylate and acrylate analogues are reduced under both batch and steady-state growth conditions after first being converted to thioesters via propionyl-CoA transferase. Our findings demonstrate the central role that CoA transferase activity plays in the utilization of acids by M. elsdenii and allows us to propose a modified acrylate pathway for M. elsdenii.

  7. Feasibility study for improved steady-state initialization algorithms for the RELAP5 computer code

    Energy Technology Data Exchange (ETDEWEB)

    Paulsen, M.P.; Peterson, C.E.; Katsma, K.R. (Computer Simulation and Analysis, Inc., Idaho Falls, ID (United States))

    1993-04-01

    A design for a new steady-state initialization method is presented that represents an improvement over the current method used in RELAP5. Current initialization methods for RELAP5 solve the transient fluidflow balance equations simulating a transient to achieve steady-state conditions. Because the transient solution is used, the initial conditions may change from the desired values requiring the use of controllers and long transient running times to obtain steady-state conditions for system problems. The new initialization method allows the user to fix thermal-hydraulic values in volumes and junctions where the conditions are best known and have the code compute the initial conditions in other areas of the system. The steady-state balance equations and solution methods are presented. The constitutive, component, and specialpurpose models are reviewed with respect to modifications required for the new steady-state initialization method. The requirements for user input are defined and the feasibility of the method is demonstrated with a testbed code by initializing some simple channel problems. The initialization of the sample problems using, the old and the new methods are compared.

  8. A two-step iterative method for evolving nonlinear acoustic systems to a steady-state

    Science.gov (United States)

    Watson, Willie R.; Myers, Michael K.

    1990-01-01

    A new approach for evolving two-dimensional nonlinear acoustic systems with flow to a steady state is presented. The approach is a two-step iterative method which is tested on a benchmark acoustic problem for which an exact analytical solution is available. Results are also calculated for a nonlinear acoustic problem for which an exact analytical solution is not known. Results indicate that the two-step method represents a powerful, efficient, and stable method for evolving two-dimensional acoustic systems to a steady state, and that the method is applicable to any number of spatial dimensions and to other hyperbolic systems. It is noted that for the benchmark problem only a single iteration on the method is required when the transient and steady-state field are of the same order of magnitude; however, four iterations are required when the steady-state field is several orders of magnitude smaller than the transient field. This method requires six iterations before achieving a steady state for the nonlinear test problem.

  9. Unsteady steady-states: central causes of unintentional force drift.

    Science.gov (United States)

    Ambike, Satyajit; Mattos, Daniela; Zatsiorsky, Vladimir M; Latash, Mark L

    2016-12-01

    We applied the theory of synergies to analyze the processes that lead to unintentional decline in isometric fingertip force when visual feedback of the produced force is removed. We tracked the changes in hypothetical control variables involved in single fingertip force production based on the equilibrium-point hypothesis, namely the fingertip referent coordinate (R FT) and its apparent stiffness (C FT). The system's state is defined by a point in the {R FT; C FT} space. We tested the hypothesis that, after visual feedback removal, this point (1) moves along directions leading to drop in the output fingertip force, and (2) has even greater motion along directions that leaves the force unchanged. Subjects produced a prescribed fingertip force using visual feedback and attempted to maintain this force for 15 s after the feedback was removed. We used the "inverse piano" apparatus to apply small and smooth positional perturbations to fingers at various times after visual feedback removal. The time courses of R FT and C FT showed that force drop was mostly due to a drift in R FT toward the actual fingertip position. Three analysis techniques, namely hyperbolic regression, surrogate data analysis, and computation of motor-equivalent and non-motor-equivalent motions, suggested strong covariation in R FT and C FT stabilizing the force magnitude. Finally, the changes in the two hypothetical control variables {R FT; C FT} relative to their average trends also displayed covariation. On the whole, the findings suggest that unintentional force drop is associated with (a) a slow drift of the referent coordinate that pulls the system toward a low-energy state and (b) a faster synergic motion of R FT and C FT that tends to stabilize the output fingertip force about the slowly drifting equilibrium point.

  10. Coagulation profile of children with sickle cell anemia in steady state ...

    African Journals Online (AJOL)

    Background: Sickle cell anemia is associated with a hypercoagulable state that may lead to alterations in a coagulation profile. Measurements of coagulation factors are known to have some predictive value for clinical outcome. Objectives: To determine the coagulation profile of children with SCA in steady state and crisis ...

  11. Variational Principle for Non-Equilibrium Steady States of the XX Model

    CERN Document Server

    Matsui, T

    2003-01-01

    We show that non-equilibrium steady states of the one dimensional exactly solved XY model can be characterized by the variational principle of free energy of a long range interaction and that they cannot be a KMS state for any C$^*$-dynamical system.

  12. Steady-state emission of blazars at very high energies

    Energy Technology Data Exchange (ETDEWEB)

    Hoehne-Moench, Daniel

    2010-07-01

    One key scientific program of the MAGIC telescope project is the discovery and detection of blazars. They constitute the most prominent extragalactic source class in the very high energy (VHE) {gamma}-ray regime with 29 out of 34 known objects. Therefore a major part of the available observation time was spent in the last years on high-frequency peaked blazars. The selection criteria were chosen to increase the detection probability. As the X-ray flux is believed to be correlated to the VHE {gamma}-ray flux, only X-ray selected sources with a flux F{sub X}>2 {mu}Jy at 1 keV were considered. To avoid strong attenuation of the -rays in the extragalactic infrared background, the redshift was restricted to values between z<0.15 and z<0.4, depending on the declination of the objects. The latter determines the zenith distance during culmination which should not exceed 30 (for z<0.4) and 45 (for z<0.15), respectively. Between August 2005 and April 2009, a sample of 24 X-ray selected high-frequency peaked blazars has been observed with the MAGIC telescope. Three of them were detected including 1ES 1218+304 being the first high-frequency peaked BL Lacertae object (HBL) to be discovered with MAGIC in VHE {gamma}-rays. One previously detected object was not confirmed as VHE emitter in this campaign by MAGIC. A set of 20 blazars previously not detected is treated more closely in this work. In this campaign, during almost four years {proportional_to}450 hrs or {proportional_to}22% of the available observation time for extragalactic objects were dedicated to investigate the baseline emission of blazars and their broadband spectral properties in this emission state. For the sample of 20 objects in a redshift range of 0.018

  13. Current Control in ITER Steady State Plasmas With Neutral Beam Steering

    Energy Technology Data Exchange (ETDEWEB)

    R.V. Budny

    2009-09-10

    Predictions of quasi steady state DT plasmas in ITER are generated using the PTRANSP code. The plasma temperatures, densities, boundary shape, and total current (9 - 10 MA) anticipated for ITER steady state plasmas are specified. Current drive by negative ion neutral beam injection, lower-hybrid, and electron cyclotron resonance are calculated. Four modes of operation with different combinations of current drive are studied. For each mode, scans with the NNBI aimed at differing heights in the plasma are performed to study effects of current control on the q profile. The timeevolution of the currents and q are calculated to evaluate long duration transients. Quasi steady state, strongly reversed q profiles are predicted for some beam injection angles if the current drive and bootstrap currents are sufficiently large.

  14. Quantitative prediction of transient and steady-state elongational viscosity of nearly monodisperse polystyrene melts

    DEFF Research Database (Denmark)

    Wagner, Manfred H.; Kheirandish, Saeid; Hassager, Ole

    2005-01-01

    starts at elongation rates larger than the inverse reptation time, and the steady-state elongational viscosities decrease with increasing elongation rate according to a power law with a power-law index of approximately - 1 / 2 instead of - 1 as predicted by the original Doi-Edwards tube model. Marrucci...... show that the transient and steady-state elongational viscosities of the nearly monodisperse polystyrene melts can be modeled quantitatively by assuming affine chain deformation balanced by the interchain pressure term of Marrucci and Ianniruberto. The interchain pressure is governed by a tube diameter...... relaxation time tau(a), which is found to be larger than the Rouse time tau(R) of the chain, and which is the only parameter of the model. For monodisperse polystyrene melts of sufficient low molar mass, tau(a), is larger than the reptation time, and a maximum in the steady-state elongational viscosity...

  15. Adiabatic Evolution of an Open Quantum System in its Instantaneous Steady State

    Science.gov (United States)

    Li, Dongxiao; Wu, Songlin; Shen, Hongzhi; Yi, Xuexi

    2017-11-01

    In this paper, we derive an adiabatic condition for an quantum system subject to environment. The adiabaticity defined here dicates that the open quantum system prepared initially in its steady state would adiabatically follow its instantaneous steady state. We find that if the driving on the open system does not induce transition between the eigenstates of the instantaneous steady state, the open system can evolve adiabatically. In order to examine the validity of the adiabatic condition, a two-band model is exemplified. The results show that the topological quantum phase transition presented in the two-band model is caused by the competition between the effect of decay and the spoiling of the adiabaticity. The geometric phase is also calculated and discussed when the adiabatic condition is satisfied.

  16. Paracetamol decreases steady-state exposure to lamotrigine by induction of glucuronidation in healthy subjects

    DEFF Research Database (Denmark)

    Gastrup, Sandra; Stage, Tore Bjerregaard; Fruekilde, Palle Bach Nielsen

    2016-01-01

    AIM: Patients receiving lamotrigine therapy frequently use paracetamol concomitantly. While one study suggests a possible, clinically relevant drug-drug interaction, practical recommendations of the concomitant use are inconsistent. We performed a systematic pharmacokinetic study in healthy...... volunteers to quantify the effect of 4-day treatment of paracetamol on the metabolism of steady-state lamotrigine. METHODS: Twelve healthy, male volunteers participated in an open-label, sequential interaction study. Lamotrigine was titrated to steady state (100 mg daily) over 36 days, and blood and urine...... sampling was performed in a non-randomised order with and without paracetamol (1 g four times daily). The primary endpoint was change in steady-state area under the plasma concentration-time curve of lamotrigine. Secondary endpoints were changes in total apparent oral clearance, renal clearance...

  17. Multiple steady states detection in a packed-bed reactive distillation column using bifurcation analysis

    DEFF Research Database (Denmark)

    Ramzan, Naveed; Faheem, Muhammad; Gani, Rafiqul

    2010-01-01

    A packed reactive distillation column producing ethyl tert-butyl ether from tert-butyl alcohol and ethanol was simulated for detection of multiple steady states using Aspen Plus®. A rate-based approach was used to make the simulation model more realistic. A base-case was first developed and fine......-tuned to fit experimental data. Sensitivity analyses were then performed for reboiler duty and distillate molar flow as continuation parameters to trace the respective bifurcation curves in the region of multiplicity. The results show output multiplicity at three distinct steady states at high reboiler duties....... Input multiplicities were detected at high reflux ratios. Temperature and composition profiles of the solution branches were analyzed to identify the stable and desirable steady state. The optimum operating point was determined to be at a reboiler duty of 0.38 kW and a reflux ratio of 5–7. These results...

  18. Capitalist Diversity and De-growth Trajectories to Steady-state Economies

    DEFF Research Database (Denmark)

    Buch-Hansen, Hubert

    2014-01-01

    Growth-critical scholarship has done much to both expose the environmentally unsustainable nature of the capitalist growth-economies of the overdeveloped part of the world and to develop an alternative vision of a degrowth transition leading to a steady-state economy. However, this scholarship...... on capitalist diversity and institutional change. On the basis of a typology of different models of capitalism, the article suggests that if de-growth transitions took place they would take different forms and lead to a variety of types of steady-state economies (SSEs). To illustrate this point, three ideal...... is ascribed to capitalist diversity and the nature of institutional change in the growth-critical literature. Against this background, the purpose of the present article is to make the “concrete utopia” of de-growth scholars and steady-state economists more specific by utilising insights from scholarship...

  19. Coherent Quantum Dynamics in Steady-State Manifolds of Strongly Dissipative Systems

    Science.gov (United States)

    Zanardi, Paolo; Campos Venuti, Lorenzo

    2014-12-01

    Recently, it has been realized that dissipative processes can be harnessed and exploited to the end of coherent quantum control and information processing. In this spirit, we consider strongly dissipative quantum systems admitting a nontrivial manifold of steady states. We show how one can enact adiabatic coherent unitary manipulations, e.g., quantum logical gates, inside this steady-state manifold by adding a weak, time-rescaled, Hamiltonian term into the system's Liouvillian. The effective long-time dynamics is governed by a projected Hamiltonian which results from the interplay between the weak unitary control and the fast relaxation process. The leakage outside the steady-state manifold entailed by the Hamiltonian term is suppressed by an environment-induced symmetrization of the dynamics. We present applications to quantum-computation in decoherence-free subspaces and noiseless subsystems and numerical analysis of nonadiabatic errors.

  20. Mechanism of Non-Steady State Dissolution of Goethite in the Presence of Siderophores

    Science.gov (United States)

    Reichard, P. U.; Kretzschmar, R.; Kraemer, S. M.

    2003-12-01

    Iron is an essential micronutrient for almost all known organisms. Bacteria, fungi, and graminaceous plants are capable of exuding siderophores as part of an iron acquisition strategy. The production of these strong iron chelating ligands is induced by iron limited conditions. Grasses under iron stress, for example, exude phytosiderophores into the rhizosphere in a special diurnal rhythm (Roemheld and Marschner 1986). A few hours after sunrise the exudation starts, culminates around noon and is shut down again until about 4 hours after noon. The phytosiderophores diffuse into the rhizosphere (Marschner et al. 1986) and are passively back transported to the plants by advective flow induced by high transpiration around noon. Despite a fairly short residence time of the phytosiderophores in the rhizosphere, it is a very effective strategy for iron acquisition. To investigate the effect of such pulse inputs of siderophores on iron acquisition, we studied the dissolution mechanism of goethite (alpha-FeOOH), a mineral phase common in soils, under non-steady state conditions. In consideration of the chemical complexity of the rhizosphere, we also investigated the effect of other organic ligands commonly found in the rhizosphere (e. g. oxalate) on the dissolution kinetics. The dissolution experiments were conducted in batch reactors with a constant goethite solids concentration of 2.5 g/l, an ionic strength of 0.01 M, a pH of 6 and 100 microM oxalate. To induce non-steady state conditions, 3 mM phytosiderophores were added to a batch after the goethite-oxalate suspension reacted for a certain time period. Before the siderophore was added to the goethite-oxalate suspension, no dissolution of iron was observed. But, with the addition of the siderophore, a high rate was observed for the iron mobilization under these non-steady state conditions that subsequently was followed by a slow steady state dissolution rate. The results of these non-steady state experiments are very

  1. Time Reversibility, Correlation Decay and the Steady State Fluctuation Relation for Dissipation

    Directory of Open Access Journals (Sweden)

    Denis J. Evans

    2013-04-01

    Full Text Available Steady state fluctuation relations for nonequilibrium systems are under intense investigation because of their important practical implications in nanotechnology and biology. However the precise conditions under which they hold need clarification. Using the dissipation function, which is related to the entropy production of linear irreversible thermodynamics, we show time reversibility, ergodic consistency and a recently introduced form of correlation decay, called T-mixing, are sufficient conditions for steady state fluctuation relations to hold. Our results are not restricted to a particular model and show that the steady state fluctuation relation for the dissipation function holds near or far from equilibrium subject to these conditions. The dissipation function thus plays a comparable role in nonequilibrium systems to thermodynamic potentials in equilibrium systems.

  2. SUPERENERGY-2: a multiassembly, steady-state computer code for LMFBR core thermal-hydraulic analysis

    Energy Technology Data Exchange (ETDEWEB)

    Basehore, K.L.; Todreas, N.E.

    1980-08-01

    Core thermal-hydraulic design and performance analyses for Liquid Metal Fast Breeder Reactors (LMFBRs) require repeated detailed multiassembly calculations to determine radial temperature profiles and subchannel outlet temperatures for various core configurations and subassembly structural analyses. At steady-state, detailed core-wide temperature profiles are required for core restraint calculations and subassembly structural analysis. In addition, sodium outlet temperatures are routinely needed for each reactor operating cycle. The SUPERENERGY-2 thermal-hydraulic code was designed specifically to meet these designer needs. It is applicable only to steady-state, forced-convection flow in LMFBR core geometries.

  3. Transient brain activity explains the spectral content of steady-state visual evoked potentials.

    Science.gov (United States)

    Gaume, Antoine; Vialatte, François; Dreyfus, Gérard

    2014-01-01

    Steady-state visual evoked potentials (SSVEPs) are widely used in the design of brain-computer interfaces (BCIs). A lot of effort has therefore been devoted to find a fast and reliable way to detect SSVEPs. We study the link between transient and steady-state VEPs and show that it is possible to predict the spectral content of a subject's SSVEPs by simulating trains of transient VEPs. This could lead to a better understanding of evoked potentials as well as to better performances of SSVEP-based BCIs, by providing a tool to improve SSVEP detection algorithms.

  4. Potential multiple steady-states in the long-term carbon cycle

    OpenAIRE

    Tennenbaum, Stephen; Berezovskaya, Faina; Schwartzman, David

    2013-01-01

    In our modeling of the long-term carbon cycle we find potential multiple steady-states in Phanerozoic climates. We include the effects of biotic enhancement of weathering on land, organic carbon burial, oxidation of reduced organic carbon in terrestrial sediments and the variation of biotic productivity with temperature, finding a second stable steady-state appearing between 20 and 50 oC. The very warm early Triassic climate as well as an oceanic anoxic event in the late Cretaceous may be the...

  5. A constitutive analysis of transient and steady-state elongational viscosities of bidisperse polystyrene blends

    DEFF Research Database (Denmark)

    Wagner, Manfred H.; Rolon-Garrido, Victor H.; Nielsen, Jens Kromann

    2008-01-01

    The transient and steady-state elongational viscosity data of three bidisperse polystyrene blends were investigated recently by Nielsen et al. [J. Rheol. 50, 453-476 (2006)]. The blends contain a monodisperse high molar mass component (M-L= 390 kg/ mol) in a matrix of a monodisperse small molar......, and allowing (albeit by use of empirical linear-viscoelastic shift factors to correct the linear-viscoelastic predictions) for a quantitative description of the transient and steady-state elongational viscosities of the bidisperse polystyrene blends....

  6. Immediate Analysis of Periodic Steady States in Switched DC-DC Converters via SPICE

    Directory of Open Access Journals (Sweden)

    D. Biolek

    2012-04-01

    Full Text Available The method of immediate analysis of periodic steady states in switched DC-DC converters operating in the continuous current mode is described. The initial conditions, which correspond to the periodic steady state, are found in the first step. They are used consequently for the conventional transient analysis. A special SPICE model of the converter finds automatically these initial conditions, which are then available within the transient analysis. The method works both for the well-known behavioral models of switched converters and also for models which employ complex nonlinear SPICE models of semiconductor switches.

  7. Steady-State Numerical Modeling of Size Effects in Wire Drawing

    DEFF Research Database (Denmark)

    Juul, Kristian Jørgensen; Nielsen, Kim Lau; Niordson, Christian Frithiof

    2016-01-01

    Wire drawing processes at micron scale receive increased interest as micro wires are increasingly required in micro electrical components. At the micron scale, size effects become important and have to be taken into consideration. The goal is to optimize the semi-cone angle of the tool in terms...... of drawing force. The present study employs a steady-state modelling technique that omits the transient regime, thus creating a basis for comprehensive parameter studies. The steady-state procedure is based on the streamline integration method presented by Dean and Hutchinson [1]. This approach allows...

  8. Comparing Non-Steady State Emissions under Start-Up and Shut-Down Operating Conditions with Steady State Emissions for Several Industrial Sectors: A Literature Review

    Directory of Open Access Journals (Sweden)

    Juwairia Obaid

    2017-02-01

    Full Text Available This study investigates the emissions of various industrial facilities under start-up, shut-down, and normal operations. The industries that have been investigated include power and/or heat generation, energy-from-waste generation, nuclear power generation, sulphuric acid production, ethylene production, petrochemical production, and waste incineration. The study investigated multiple facilities worldwide for each of these industrial categories. The different potential contaminants characteristic of each industry type have been investigated and the emissions of these contaminants under non-steady state have been compared to the steady state emissions. Where available, trends have been developed to identify the circumstances, i.e., the industrial sector and contaminant, under which the assessment and consideration of emissions from start-up and shut-down events is necessary for each industry. These trends differ by industrial sector and contaminant. For example, the study shows that sulphur dioxide (SO2 emissions should be assessed for the start-up operations of sulphuric acid production plants, but may not need to be assessed for the start-up operations of a conventional power generation facility. The trends developed as part of this research paper will help air permit applicants to effectively allocate their resources when assessing emissions related to non-steady state operations. Additionally, it will ensure that emissions are assessed for the worst-case scenario. This is especially important when emissions under start-up and shut-down operations have the potential to exceed enforceable emission limits. Thus, assessing emissions for the worst-case scenario can help in preventing the emissions from adversely impacting public health and the environment.

  9. Catalytic Mechanism of Cruzain from Trypanosoma cruzi as Determined from Solvent Kinetic Isotope Effects of Steady-State and Pre-Steady-State Kinetics.

    Science.gov (United States)

    Zhai, Xiang; Meek, Thomas D

    2018-01-16

    Cruzain, an important drug target for Chagas disease, is a member of Clan CA of the cysteine proteases. Understanding the catalytic mechanism of cruzain is vital to the design of new inhibitors. To this end, we have performed pH-rate profiles for substrates and affinity agents, and have determined solvent kinetic isotope effects in pre-steady-state and steady-state modes using three substrates: Cbz-Phe-Arg-AMC, Cbz-Arg-Arg-AMC and Cbz-Arg-Ala-AMC. The pH-rate profile of kcat/Km for Cbz-Arg-Arg-AMC indicated groups of pK1 = 6.6 (unprotonated) and pK2 ~ 9.6 (protonated) required for catalysis. The temperature dependence of the group of pK = 6.2 - 6.6 exhibited a values of Hion = 8.4 kcal/mol, typical of histidine. The pH-rate profile of inactivation by iodoacetamide confirmed that the catalytic cysteine possesses a pKa of 9.8. Normal solvent kinetic isotope effects were observed for both D2Okcat = 1.6 - 2.1 and D2Okcat/Km = 1.1 - 1.4 for all three substrates. Pre-steady-state kinetics revealed exponential bursts of AMC production for Cbz-Phe-Arg-AMC and Cbz-Arg-Arg-AMC, but not for Cbz-Arg-Ala-AMC. The overall solvent isotope effect on k¬cat is attributable to the solvent isotope effect on the deacylation step. Our results suggest that cruzain is unique among papain-like cysteine proteases in that the catalytic cysteine and histidine are neutral in charge in the free enzyme. The generation of the active thiolate of the catalytic cysteine is likely proceeded (and possibly triggered) by a ligand-induced conformational change, which could bring the catalytic dyad to close proximity in order to effect proton transfer.

  10. Influence of longitudinal position on the evolution of steady-state signal in cardiac cine balanced steady-state free precession imaging.

    Science.gov (United States)

    Spear, Tyler J; Stromp, Tori A; Leung, Steve W; Vandsburger, Moriel H

    2017-11-01

    Emerging quantitative cardiac magnetic resonance imaging (CMRI) techniques use cine balanced steady-state free precession (bSSFP) to measure myocardial signal intensity and probe underlying physiological parameters. This correlation assumes that steady-state is maintained uniformly throughout the heart in space and time. To determine the effects of longitudinal cardiac motion and initial slice position on signal deviation in cine bSSFP imaging by comparing two-dimensional (2D) and three-dimensional (3D) acquisitions. Nine healthy volunteers completed cardiac MRI on a 1.5-T scanner. Short axis images were taken at six slice locations using both 2D and 3D cine bSSFP. 3D acquisitions spanned two slices above and below selected slice locations. Changes in myocardial signal intensity were measured across the cardiac cycle and compared to longitudinal shortening. For 2D cine bSSFP, 46% ± 9% of all frames and 84% ± 13% of end-diastolic frames remained within 10% of initial signal intensity. For 3D cine bSSFP the proportions increased to 87% ± 8% and 97% ± 5%. There was no correlation between longitudinal shortening and peak changes in myocardial signal. The initial slice position significantly impacted peak changes in signal intensity for 2D sequences ( P  cine bSSFP that is only restored at the center of a 3D excitation volume. During diastole, a transient steady-state is established similar to that achieved with 3D cine bSSFP regardless of slice location.

  11. Peroxidase-catalyzed oxidation of capsaicinoids: steady-state and transient-state kinetic studies.

    Science.gov (United States)

    Goodwin, Douglas C; Hertwig, Kristen M

    2003-09-01

    Capsaicinoids are the pungent compounds in Capsicum fruits (i.e., "hot" peppers). Peroxidases catalyze capsaicinoid oxidation and may play a central role in their metabolism. However, key kinetic aspects of peroxidase-catalyzed capsaicinoid oxidation remain unresolved. Using transient-state methods, we evaluated horseradish peroxidase compound I and II reduction by two prominent capsaicinoids (25 degrees C, pH 7.0). We determined rate constants approaching 2 x 10(7) and 5 x 10(5)M(-1)s(-1) for compound I and compound II reduction, respectively. We also determined k(app) values for steady-state capsaicinoid oxidation approaching 8 x 10(5)M(-1)s(-1) (25 degrees C, pH 7.0). Accounting for stoichiometry, these are in excellent agreement with constants for compound II reduction, suggesting that this reaction governs capsaicinoid-dependent peroxidase turnover. Ascorbate rapidly reduced capsaicinoid radicals, assisting in the determination of the kinetic constants reported. Because ascorbate accumulates in Capsicum fruits, it may also be an important determinant for capsaicinoid content and preservation in Capsicum fruits and related products.

  12. A quasi-steady state shrinking core model of "whole tree" combustion

    African Journals Online (AJOL)

    A quasi-steady state shrinking core model of "whole tree" combustion. A. Ouédraogo, JC Mulligan, JG Cleland. Abstract. (J. de la Recherche Scientifique de l'Université de Lomé, 2000, 4(2): 199-208). Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African ...

  13. Steady State Flammable Gas Release Rate Calculation and Lower Flammability Level Evaluation for Hanford Tank Waste

    Energy Technology Data Exchange (ETDEWEB)

    HU, T.A.

    2000-04-27

    This work is to assess the steady-state flammability level at normal and off-normal ventilation conditions in the tank dome space for 177 double-shell and single-shell tanks at Hanford. Hydrogen generation rate was calculated for 177 tanks using rate equation model developed recently.

  14. ANALYTICAL EFFECTIVENESS CALCULATIONS CONCERNING THE DEGRADATION OF AN INHIBITIVE SUBSTRATE BY A STEADY-STATE BIOFILM

    NARCIS (Netherlands)

    VANEDE, CJ; BOLLEN, AM; BEENACKERS, AACM

    A reaction engineering model for the degradation of an inhibitory substrate by a steady-state biofilm is presented. The model describes both the metabolic rate controlling behavior of this substrate in the biofilm and the effect of diffusion limitation caused by an arbitrary substrate on the active

  15. Real-time dynamic hydraulic model for water distribution networks: steady state modelling

    CSIR Research Space (South Africa)

    Osman, Mohammad S

    2016-09-01

    Full Text Available steady state hydraulic model that will be used within a real-time dynamic hydraulic model (DHM). The Council for Scientific and Industrial Research (CSIR) water distribution network (WDN) is used as a pilot study for this purpose. A hydraulic analysis...

  16. Steady-state and transient performance of HVDC link based 3-level ...

    African Journals Online (AJOL)

    Steady-state and transient performance of HVDC link based 3-level VSC supplying a passive load. ... The transient performance is explored by examining the VSC_HVDC response to external AC faults. Finally, the models ... Keywords: HVDC- voltage source converter (VSC) - IGBT- SPWM- Control design - passive load.

  17. Comparative analysis of steady state heat transfer in a TBC and ...

    Indian Academy of Sciences (India)

    In the present work, a functionally graded model of an air-cooled turbine blade with airfoil geometry conforming to the NACA0012 is developed which is then used in a finite element algorithm to obtain a non-linear steady state solution to the heat equation for the blade under convection and radiation boundary conditions.

  18. Steady State Shift Damage Localization in a Residential-Sized Wind Turbine Blade

    DEFF Research Database (Denmark)

    Markvart, Morten Kusk; Sekjær, Claus; Bull, Thomas

    2017-01-01

    This paper presents an experimental damage localization study, in which the recently proposed steady state shift damage localization (S3DL) method is tested in the context of a residential-sized wind turbine blade. The S3DL method constitutes a model-based damage localization scheme, whose method...

  19. Effect of stacking fault energy on steady-state creep rate of face ...

    African Journals Online (AJOL)

    Continuum elastic theory was used to establish the relationships between the force of interaction required to constrict dislocation partials, energy of constriction and climb velocity of the constricted thermal jogs, in order to examine the effect of stacking fault energy (SFE) on steady state creep rate of face centered cubic ...

  20. Steady state drift vortices in plasmas with shear flow in equilibrium

    DEFF Research Database (Denmark)

    Chakrabarti, N.

    1999-01-01

    The Hasegawa-Mima equation in the presence of sheared poloidal flow is solved for two-dimensional steady state vortex. It is shown that when the phase velocity of the vortex is the same as the diamagnetic drift velocity, an exact solution in the form of counter-rotating vortices may appear...

  1. Einstein's steady-state theory: an abandoned model of the cosmos

    Science.gov (United States)

    O'Raifeartaigh, Cormac; McCann, Brendan; Nahm, Werner; Mitton, Simon

    2014-09-01

    We present a translation and analysis of an unpublished manuscript by Albert Einstein in which he attempted to construct a `steady-state' model of the universe. The manuscript, which appears to have been written in early 1931, demonstrates that Einstein once explored a cosmic model in which the mean density of matter in an expanding universe is maintained constant by the continuous formation of matter from empty space. This model is very different to previously known Einsteinian models of the cosmos (both static and dynamic) but anticipates the later steady-state cosmology of Hoyle, Bondi and Gold in some ways. We find that Einstein's steady-state model contains a fundamental flaw and suggest that it was abandoned for this reason. We also suggest that he declined to explore a more sophisticated version because he found such theories rather contrived. The manuscript is of historical interest because it reveals that Einstein debated between steady-state and evolving models of the cosmos decades before a similar debate took place in the cosmological community.

  2. Transient and steady state photoelectronic analysis in TlInSe{sub 2} crystals

    Energy Technology Data Exchange (ETDEWEB)

    Qasrawi, A.F., E-mail: aqasrawi@atilim.edu.tr [Group of Physics, Faculty of Engineering, Atilim University, 06836 Ankara (Turkey); Department of Physics, Arab-American University, Jenin, West Bank, Palestine (Country Unknown); Gasanly, N.M. [Department of Physics, Middle East Technical University, 06531 Ankara (Turkey)

    2011-08-15

    Highlights: {yields} The steady state and time dependent photoconductivity kinetics of the TlInSe{sub 2} crystals are investigated in the temperature region of 100-350 K. {yields} The photocurrent of the sample exhibited linear, sublinear, and supralinear recombination mechanisms, at, above and below 160 K, respectively. {yields} Steady state photoconductivity revealed two recombination centres located at 234 and 94 meV. {yields} The transient photoconductivity is limited by a trapping center located at 173 meV. {yields} The capture coefficient of the trap for holes was determined as 3.11 x 10{sup -22} cm{sup -2}. -- Abstract: The temperature and illumination effects on the transient and steady state photoconductivities of TlInSe{sub 2} crystals have been studied. Namely, two recombination centres located at 234 and at 94 meV and one trap center located at 173 meV were determined from the temperature-dependent steady state and transient photoconductivities, respectively. The illumination dependence of photoconductivity indicated the domination of sublinear and supralinear recombination mechanisms above and below 160 K, respectively. The change in the recombination mechanism is attributed to the exchange of roles between the linear recombination at the surface and trapping centres in the crystal, which become dominant as temperature decreases. The transient photoconductivity measurement allowed the determination of the capture coefficient of traps for holes as 3.11 x 10{sup -22} cm{sup -2}.

  3. Estimation of steady-state culture characteristics during acceleration-stats with yeasts

    NARCIS (Netherlands)

    Sluis, van der C.; Westerink, B.H.; Dijkstal, M.M.; Castelein, S.J.; Boxtel, van A.J.B.; Tramper, J.; Wijffels, R.H.

    2001-01-01

    Steady-state culture characteristics are usually determined in chemostat cultivations, which are very time-consuming. In contrast, acceleration-stat (A-stat) cultivations in which the dilution rate is continuously changed with a constant acceleration rate are not so time-consuming, especially at

  4. 40 CFR 86.1362-2010 - Steady-state testing with a ramped-modal cycle.

    Science.gov (United States)

    2010-07-01

    ... Exhaust Test Procedures § 86.1362-2010 Steady-state testing with a ramped-modal cycle. This section... testing the engine on a dynamometer with the following ramped-modal duty cycle to determine whether it...-modal test with a warmed-up engine. If the ramped-modal test follows directly after testing over the...

  5. Thermodynamics and stability of non-equilibrium steady states in open systems

    OpenAIRE

    Bulíček, Miroslav; Málek, Josef; Průša, Vít

    2017-01-01

    Thermodynamical arguments are known to be useful in the construction of physically motivated Lyapunov functionals for nonlinear stability analysis of spatially homogeneous equilibrium steady states in thermodynamically isolated systems. Unfortunately, the limitation to thermodynamically isolated systems is essential, and standard arguments are not applicable even for some very simple thermodynamically open systems. On the other hand, the nonlinear stability of thermodynamically open systems i...

  6. Experimental study of vaporization effect on steady state and dynamic behavior of catalytic pellets

    NARCIS (Netherlands)

    Kulikov, A.V.; Kuzin, N.A.; Shigarov, A.B.; Kirillov, V.A.; Westerterp, K.R.; Kronberg, Alexandre E.

    2001-01-01

    The impact of the combined evaporation of the liquid phase and reaction on single catalyst pellet performance has been studied experimentally. The exothermic, catalyzed hydrogenation of α-methylstyrene (AMS) to cumene has been employed as a model reaction. Steady state and dynamic experiments have

  7. Quasi-steady state thermal performances of a solar air heater with ...

    African Journals Online (AJOL)

    Quasi-steady state thermal performance of a solar air heater with a combined absorber is studied. The whole energy balance equations related to the system were articulated as a linear system of temperature equations. Solutions to this linear system were assessed from program based on an iterative process. The mean ...

  8. Steady-State PMU Compliance Test under C37.118.1a-2014

    DEFF Research Database (Denmark)

    Ghiga, Radu; Wu, Qiuwei; Martin, Kenneth E.

    2016-01-01

    This paper presents a flexible testing method and the steady-state compliance of PMUs under the C37.118.1a amendment. The work is focused on the changes made to the standard for the harmonic rejection and out-of-band interference tests for which the ROCOF Error limits have been suspended. The paper...

  9. A Steady State Visually Evoked Potential Investigation of Memory and Ageing

    Science.gov (United States)

    Macpherson, Helen; Pipingas, Andrew; Silberstein, Richard

    2009-01-01

    Old age is generally accompanied by a decline in memory performance. Specifically, neuroimaging and electrophysiological studies have revealed that there are age-related changes in the neural correlates of episodic and working memory. This study investigated age-associated changes in the steady state visually evoked potential (SSVEP) amplitude and…

  10. STEADY STATE FLAMMABLE GAS RELEASE RATE CALCULATION AND LOWER FLAMMABILITY LEVEL EVALUATION FOR HANFORD TANK WASTE

    Energy Technology Data Exchange (ETDEWEB)

    HU TA

    2009-10-26

    Assess the steady-state flammability level at normal and off-normal ventilation conditions. The hydrogen generation rate was calculated for 177 tanks using the rate equation model. Flammability calculations based on hydrogen, ammonia, and methane were performed for 177 tanks for various scenarios.

  11. Walkway Length Determination for Steady State Walking in Young and Older Adults

    Science.gov (United States)

    Macfarlane, Pamela A.; Looney, Marilyn A.

    2008-01-01

    The primary purpose of this study was to determine acceleration (AC) and deceleration (DC) distances that would accommodate young and older adults walking at their preferred and fast speeds. A secondary purpose was to determine the minimal walkway length needed to record six steady state (SS) steps (three full gait cycles) for younger and older…

  12. Evaluation of small hypothalamic hamartomas with 3D constructive interference in steady state (CISS) sequence

    Energy Technology Data Exchange (ETDEWEB)

    Yamura, Masayuki; Hirai, Toshinori; Kitajima, Mika; Hayashida, Yoshiko; Ikushima, Ichiro; Yamashita, Yasuyuki [Graduate School of Medical Sciences, Kumamoto University, Department of Diagnostic Radiology, Kumamoto (Japan); Korogi, Yukunori [University of Occupational and Environmental Health, School of Medicine, Department of Radiology, Kitakyushu (Japan); Endo, Fumio [Kumamoto University, Department of Pediatrics,Graduate School of Medical Sciences, Kumamoto (Japan)

    2005-03-01

    Hypothalamic hamartomas are relatively rare, non-neoplastic congenital malformations. With conventional MR images alone, small hypothalamic hamartomas may be difficult to diagnose because of artifacts from cerebrospinal fluid. We present the usefulness of three-dimensional constructive interference in steady state sequence for evaluating small hypothalamic hamartomas in three pediatric patients. (orig.)

  13. Reliable and Efficient Procedure for Steady-State Analysis of Nonautonomous and Autonomous Systems

    Directory of Open Access Journals (Sweden)

    J. Dobes

    2012-04-01

    Full Text Available The majority of contemporary design tools do not still contain steady-state algorithms, especially for the autonomous systems. This is mainly caused by insufficient accuracy of the algorithm for numerical integration, but also by unreliable steady-state algorithms themselves. Therefore, in the paper, a very stable and efficient procedure for the numerical integration of nonlinear differential-algebraic systems is defined first. Afterwards, two improved methods are defined for finding the steady state, which use this integration algorithm in their iteration loops. The first is based on the idea of extrapolation, and the second utilizes nonstandard time-domain sensitivity analysis. The two steady-state algorithms are compared by analyses of a rectifier and a C-class amplifier, and the extrapolation algorithm is primarily selected as a more reliable alternative. Finally, the method based on the extrapolation naturally cooperating with the algorithm for solving the differential-algebraic systems is thoroughly tested on various electronic circuits: Van der Pol and Colpitts oscillators, fragment of a large bipolar logical circuit, feedback and distributed microwave oscillators, and power amplifier. The results confirm that the extrapolation method is faster than a classical plain numerical integration, especially for larger circuits with complicated transients.

  14. STEADY STATE FLAMMABLE GAS RELEASE RATE CALCULATION & LOWER FLAMMABILITY LEVEL EVALUATION FOR HANFORD TANK WASTE

    Energy Technology Data Exchange (ETDEWEB)

    HU, T.A.

    2005-10-27

    Assess the steady-state flammability level at normal and off-normal ventilation conditions. The hydrogen generation rate was calculated for 177 tanks using the rate equation model. Flammability calculations based on hydrogen, ammonia, and methane were performed for 177 tanks for various scenarios.

  15. Calculation of the rate of coagulation of hydrophobic colloids in the non-steady state

    NARCIS (Netherlands)

    Roebersen, G.J.; Wiersema, P.H.

    1974-01-01

    In accurate coagulation measurements, the observed coagulation rate should be extrapolated to time zero to find the rate of formation of doublets from singlet particles. In the theoretical calculation of coagulation rates, generally a steady state is assumed. At the onset of coagulation, however, a

  16. Steady-State Fluorescence Anisotropy to Investigate Flavonoids Binding to Proteins

    Science.gov (United States)

    Ingersoll, Christine M.; Strollo, Christen M.

    2007-01-01

    The steady-state fluorescence anisotropy is employed to study the binding of protein of a model protein, human serum albumin, to a commonly used flavonoid, quercetin. The experiment describes the thermodynamics, as well as the biochemical interactions of such binding effectively.

  17. Molecular Control of Steady-State Dendritic Cell Maturation and Immune Homeostasis

    Science.gov (United States)

    Hammer, Gianna Elena; Ma, Averil

    2014-01-01

    Dendritic cells (DCs) are specialized sentinels responsible for coordinating adaptive immunity. This function is dependent upon coupled sensitivity to environmental signs of inflammation and infection to cellular maturation—the programmed alteration of DC phenotype and function to enhance immune cell activation. Although DCs are thus well equipped to respond to pathogens, maturation triggers are not unique to infection. Given that immune cells are exquisitely sensitive to the biological functions of DCs, we now appreciate that multiple layers of suppression are required to restrict the environmental sensitivity, cellular maturation, and even life span of DCs to prevent aberrant immune activation during the steady state. At the same time, steady-state DCs are not quiescent but rather perform key functions that support homeostasis of numerous cell types. Here we review these functions and molecular mechanisms of suppression that control steady-state DC maturation. Corruption of these steady-state operatives has diverse immunological consequences and pinpoints DCs as potent drivers of autoimmune and inflammatory disease. PMID:23330953

  18. Transient and Steady-State Responses of an Asymmetric Nonlinear Oscillator

    Directory of Open Access Journals (Sweden)

    Alex Elías-Zúñiga

    2013-01-01

    oscillator that describes the motion of a damped, forced system supported symmetrically by simple shear springs on a smooth inclined bearing surface. We also use the percentage overshoot value to study the influence of damping and nonlinearity on the transient and steady-state oscillatory amplitudes.

  19. Limestone Powders Yielding and Steady State Resistance under shearing with different testers

    NARCIS (Netherlands)

    Shi, Hao; Luding, Stefan; Magnanimo, Vanessa

    2016-01-01

    We study the effect of both particle size and shear testers on the failure (yielding) and the steady state shear strength of granular materials. Physical experiments are carried out on four fine limestone powders using a geotechnical direct shear tester and the standard Schulze ring shear tester to

  20. Improvement of Predictivity of Teicoplanin Serum Trough Concentrations at Steady State Calculated by Vancomycin Pharmacokinetic Parameter.

    Science.gov (United States)

    Kobayashi, Ryo; Otomo, Shinya; Shiba, Yusuke; Ebinuma, Keiichi; Sudoh, Toshiaki

    2016-01-01

     According to a recent study and meta-analysis, trough levels of >10 μg/mL teicoplanin (TEIC) may be acceptable for the treatment of uncomplicated infection, but no method of TEIC personalized medicine has been established. Vancomycin (VCM) and TEIC are glycopeptide antibiotic agents effective against methicillin-resistance Staphyloccocus aureus. This study aimed to establish TEIC personalized medicine at a steady state calculated by VCM pharmacokinetic parameters. Bayesian forecasting and population mean methods were employed to estimate individual total VCM clearance (CL) using existing population pharmacokinetics (PPK) parameter, and the differences between the CL calculated by these two methods were defined as ΔCL. Serum drug concentration data for patients treated with TEIC were collected at a steady state concentration (>96 h post infusion). There was a significant relationship between the prediction error of TEIC trough level and ΔCL. The relation between ΔCL and TEIC trough concentration at steady state was used to develop the following equation to determine the maintenance dose: TEIC (μg/mL)=1.1119X-6.124ΔCL+3.9164 (X is defined as TEIC trough concentration calculated from the PPK parameter). The results of this study indicated that it is possible to improve the prediction error of TEIC trough concentration at a steady state for patients who have received VCM therapy.

  1. An approximation method for solving the steady-state probability distribution of probabilistic Boolean networks.

    Science.gov (United States)

    Ching, Wai-Ki; Zhang, Shuqin; Ng, Michael K; Akutsu, Tatsuya

    2007-06-15

    Probabilistic Boolean networks (PBNs) have been proposed to model genetic regulatory interactions. The steady-state probability distribution of a PBN gives important information about the captured genetic network. The computation of the steady-state probability distribution usually includes construction of the transition probability matrix and computation of the steady-state probability distribution. The size of the transition probability matrix is 2(n)-by-2(n) where n is the number of genes in the genetic network. Therefore, the computational costs of these two steps are very expensive and it is essential to develop a fast approximation method. In this article, we propose an approximation method for computing the steady-state probability distribution of a PBN based on neglecting some Boolean networks (BNs) with very small probabilities during the construction of the transition probability matrix. An error analysis of this approximation method is given and theoretical result on the distribution of BNs in a PBN with at most two Boolean functions for one gene is also presented. These give a foundation and support for the approximation method. Numerical experiments based on a genetic network are given to demonstrate the efficiency of the proposed method.

  2. Analysis of Plasticity, Fracture and Friction in Steady State Plate Cutting

    DEFF Research Database (Denmark)

    Simonsen, Bo Cerup; Wierzbicki, Tomasz

    1996-01-01

    A closed form solution to the problem of steady state wedge cutting through a ductile metal plate is presented. The considered problem is an idealization of a ship bottom raking process, i.e. a continuous cutting damage of a ship bottom by a hard knife-like rock in a grounding event. A new kinema...

  3. Incorporation of wind generation to the Mexican power grid: Steady state analysis

    Energy Technology Data Exchange (ETDEWEB)

    Tovar, J.H.; Guardado, J.L.; Cisneros, F. [Inst. Tecnologico de Morelia (Mexico); Cadenas, R.; Lopez, S. [Comision Federal de Electricidad, Morelia (Mexico)

    1997-09-01

    This paper describes a steady state analysis related with the incorporation of large amounts of eolic generation into the Mexican power system. An equivalent node is used to represent individual eolic generators in the wind farm. Possible overloads, losses, voltage and reactive profiles and estimated severe contingencies are analyzed. Finally, the conclusions of this study are presented.

  4. Algorithm for determining two-periodic steady-states in AC machines directly in time domain

    Directory of Open Access Journals (Sweden)

    Sobczyk Tadeusz J.

    2016-09-01

    Full Text Available This paper describes an algorithm for finding steady states in AC machines for the cases of their two-periodic nature. The algorithm enables to specify the steady-state solution identified directly in time domain despite of the fact that two-periodic waveforms are not repeated in any finite time interval. The basis for such an algorithm is a discrete differential operator that specifies the temporary values of the derivative of the two-periodic function in the selected set of points on the basis of the values of that function in the same set of points. It allows to develop algebraic equations defining the steady state solution reached in a chosen point set for the nonlinear differential equations describing the AC machines when electrical and mechanical equations should be solved together. That set of those values allows determining the steady state solution at any time instant up to infinity. The algorithm described in this paper is competitive with respect to the one known in literature an approach based on the harmonic balance method operated in frequency domain.

  5. From steady-state to synchronized yeast glycolytic oscilations II: model validation.

    NARCIS (Netherlands)

    du Preez, F.B.; van Niekerk, D.D.; Snoep, J.L.

    2012-01-01

    In an accompanying paper [du Preez et al., (2012) FEBS J279, 2810-2822], we adapt an existing kinetic model for steady-state yeast glycolysis to simulate limit-cycle oscillations. Here we validate the model by testing its capacity to simulate a wide range of experiments on dynamics of yeast

  6. TRANSIENT AND STEADY STATE STUDY OF PURE AND MIXED REFRIGERANTS IN A RESIDENTIAL HEAT PUMP

    Science.gov (United States)

    The report gives results of an experimental and theoretical investigation of the transient and steady state performance of a residential air-conditioning/heat pump (AC/HP) operating with different refrigerants. (NOTE: The project was motivated by environmental concerns related to...

  7. Diagnostics development for quasi-steady-state operation of the Wendelstein 7-X stellarator (invited).

    Science.gov (United States)

    König, R; Baldzuhn, J; Biedermann, C; Burhenn, R; Bozhenkov, S; Cardella, A; Endler, M; Hartfuss, H-J; Hathiramani, D; Hildebrandt, D; Hirsch, M; Jakubowski, M; Kocsis, G; Kornejev, P; Krychowiak, M; Laqua, H P; Laux, M; Oosterbeek, J W; Pasch, E; Richert, T; Schneider, W; Sunn-Pedersen, T; Thomsen, H; Weller, A; Werner, A; Wolf, R; Zhang, D; Zoletnik, S

    2012-10-01

    The critical issues in the development of diagnostics, which need to work robust and reliable under quasi-steady state conditions for the discharge durations of 30 min and which cannot be maintained throughout the one week duration of each operation phase of the Wendelstein 7-X stellarator, are being discussed.

  8. Technical challenges in the construction of the steady-state stellarator Wendelstein 7-X

    NARCIS (Netherlands)

    Bosch, H. S.; R C Wolf,; Andreeva, T.; Baldzuhn, J.; Birus, D.; Bluhm, T.; Brauer, T.; Braune, H.; Bykov, V.; Cardella, A.; Durodie, F.; Endler, M.; Erckmann, V.; Gantenbein, G.; Hartmann, D.; Hathiramani, D.; Heimann, P.; Heinemann, B.; Hennig, C.; Hirsch, M.; Holtum, D.; Jagielski, J.; Jelonnek, J.; Kasparek, W.; Klinger, T.; Konig, R.; Kornejew, P.; Kroiss, H.; Krom, J. G.; Kuhner, G.; Laqua, H.; Laqua, H. P.; Lechte, C.; Lewerentz, M.; Maier, J.; McNeely, P.; Messiaen, A.; Michel, G.; Ongena, J.; Peacock, A.; Pedersen, T. S.; Riedl, R.; Riemann, H.; Rong, P.; Rust, N.; Schacht, J.; Schauer, F.; Schroeder, R.; Schweer, B.; Spring, A.; Stabler, A.; Thumm, M.; Turkin, Y.; Wegener, L.; Werner, A.; Zhang, D.; Zilker, M.; Akijama, T.; Alzbutas, R.; Ascasibar, E.; Balden, M.; Banduch, M.; Baylard, C.; Behr, W.; Beidler, C.; Benndorf, A.; Bergmann, T.; Biedermann, C.; Bieg, B.; Biel, W.; Borchardt, M.; Borowitz, G.; Borsuk, V.; Bozhenkov, S.; Brakel, R.; Brand, H.; Brown, T.; Brucker, B.; Burhenn, R.; Buscher, K. P.; Caldwell-Nichols, C.; Cappa, A.; Cardella, A.; Carls, A.; Carvalho, P.; Ciupinski, L.; Cole, M.; Collienne, J.; Czarnecka, A.; Czymek, G.; Dammertz, G.; Dhard, C. P.; Davydenko, V. I.; Dinklage, A.; Drevlak, M.; Drotziger, S.; Dudek, A.; Dumortier, P.; Dundulis, G.; von Eeten, P.; Egorov, K.; Estrada, T.; Faugel, H.; Fellinger, J.; Feng, Y.; Fernandes, H.; Fietz, W. H.; Figacz, W.; Fischer, F.; Fontdecaba, J.; Freund, A.; Funaba, T.; Funfgelder, H.; Galkowski, A.; Gates, D.; Giannone, L.; Regana, J. M. G.; Geiger, J.; Geissler, S.; Greuner, H.; Grahl, M.; Gross, S.; Grosman, A.; Grote, H.; Grulke, O.; R. Jaspers,; Szabo, V.

    2013-01-01

    The next step in the Wendelstein stellarator line is the large superconducting device Wendelstein 7-X, currently under construction in Greifswald, Germany. Steady-state operation is an intrinsic feature of stellarators, and one key element of the Wendelstein 7-X mission is to demonstrate

  9. On the Steady-State System Size Distribution for a Discrete-Time Geo/G/1 Repairable Queue

    Directory of Open Access Journals (Sweden)

    Renbin Liu

    2014-01-01

    Full Text Available This paper studies a discrete-time N-policy Geo/G/1 queueing system with feedback and repairable server. With a probabilistic analysis method and renewal process theory, the steady-state system size distribution is derived. Further, the steady-state system size distribution derived in this work is extremely suitable for numerical calculations. Numerical example illustrates the important application of steady-state system size distribution in system capacity design for a network access proxy system.

  10. The steady-state force-Ca2+ relationship in intact lobster (Homarus americanus) cardiac muscle.

    Science.gov (United States)

    Shinozaki, T; Wilkens, J L; Yazawa, T; Cavey, M J; ter Keurs, H E D J

    2004-07-01

    The heart of the decapod crustacean is activated by regular impulse bursts from the cardiac ganglion. The cardiac pump function depends on ganglionic burst frequency, burst duration, and burst impulse frequency. Here, we activated isolated lobster cardiac ostial muscle (Orbicularis ostii muscle, OOM) by stimulus trains in vitro in order to characterize the response of the contractile apparatus to [Ca2+]i. We employed stimulus trains that generate a steady state between the [Ca2+]i and force in order to estimate the Ca2+ sensitivity of myofilaments. Force and [Ca2+]i transients were simultaneously recorded using a silicon strain gauge and the fluorescence of iontophoretically microinjected fura-2 salt. We examined the effects of tetanus duration (TD), the interval between trains, and 6 microM cyclopiazonic acid, an inhibitor of the SR Ca2+ pump, on the steady-state force-[Ca2+]i relationship. The instantaneous force-[Ca2+]i relationships appeared sigmoidal (EC50 and Hill coefficient, 98.8+/-32.7 nM and 2.47+/-0.20, mean +/- SD, respectively), as did the curves superimposed after 500 ms following the start of stimulation, indicating that the force-[Ca2+]i relationship had reached a steady state at that time. Also, the maximum activated force (Fmax) was estimated using the steady-state force-[Ca2+]i relationship. Prolonged stimulus trains, decreasing the interval between recurrent trains from 5 to 2.5 s, and cyclopiazonic acid each increased the measured EC50 without changing Fmax. The EC50 correlated strongly with averaged [Ca2+]i over time. We conclude that the steady-state force-[Ca2+]i relationships in the OOM indicate cooperation between force generation and Ca2+ binding by the myofilaments. Our data also suggest the existence of a novel Ca2+-dependent mechanism which reduces Ca2+ sensitivity and accelerates relaxation of lobster cardiac muscle myofilaments.

  11. A pre-steady state and steady state kinetic analysis of the N-ribosyl hydrolase activity of hCD157.

    Science.gov (United States)

    Preugschat, Frank; Carter, Luke H; Boros, Eric E; Porter, David J T; Stewart, Eugene L; Shewchuk, Lisa M

    2014-12-15

    hCD157 catalyzes the hydrolysis of nicotinamide riboside (NR) and nicotinic acid riboside (NAR). The release of nicotinamide or nicotinic acid from NR or NAR was confirmed by spectrophotometric, HPLC and NMR analyses. hCD157 is inactivated by a mechanism-based inhibitor, 2'-deoxy-2'-fluoro-nicotinamide arabinoside (fNR). Modification of the enzyme during the catalytic cycle by NR, NAR, or fNR increased the intrinsic protein fluorescence by approximately 50%. Pre-steady state and steady state data were used to derive a minimal kinetic scheme for the hydrolysis of NR. After initial complex formation a reversible step (360 and 30s(-1)) is followed by a slow irreversible step (0.1s(-1)) that defined the rate limiting step, or kcat. The calculated KMapp value for NR in the hydrolytic reaction is 6nM. The values of the kinetic constants suggest that one biological function of cell-surface hCD157 is to bind and slowly hydrolyze NR, possibly converting it to a ligand-activated receptor. Differences in substrate preference between hCD157 and hCD38 were rationalized through a comparison of the crystal structures of the two proteins. This comparison identified several residues in hCD157 (F108 and F173) that can potentially hinder the binding of dinucleotide substrates (NAD+). Copyright © 2014 Elsevier Inc. All rights reserved.

  12. Efficient calculation of steady state probability distribution for stochastic biochemical reaction network.

    Science.gov (United States)

    Karim, Shahriar; Buzzard, Gregery T; Umulis, David M

    2012-01-01

    The Steady State (SS) probability distribution is an important quantity needed to characterize the steady state behavior of many stochastic biochemical networks. In this paper, we propose an efficient and accurate approach to calculating an approximate SS probability distribution from solution of the Chemical Master Equation (CME) under the assumption of the existence of a unique deterministic SS of the system. To find the approximate solution to the CME, a truncated state-space representation is used to reduce the state-space of the system and translate it to a finite dimension. The subsequent ill-posed eigenvalue problem of a linear system for the finite state-space can be converted to a well-posed system of linear equations and solved. The proposed strategy yields efficient and accurate estimation of noise in stochastic biochemical systems. To demonstrate the approach, we applied the method to characterize the noise behavior of a set of biochemical networks of ligand-receptor interactions for Bone Morphogenetic Protein (BMP) signaling. We found that recruitment of type II receptors during the receptor oligomerization by itself doesn't not tend to lower noise in receptor signaling, but regulation by a secreted co-factor may provide a substantial improvement in signaling relative to noise. The steady state probability approximation method shortened the time necessary to calculate the probability distributions compared to earlier approaches, such as Gillespie's Stochastic Simulation Algorithm (SSA) while maintaining high accuracy.

  13. Steady state or non-steady state? Identifying driving mechanisms of oxygen isotope signatures of leaf transpiration in functionally distinct plant species

    Science.gov (United States)

    Dubbert, Maren; Kübert, Angelika; Cuntz, Matthias; Werner, Christiane

    2015-04-01

    Isotope techniques are widely applied in ecosystem studies. For example, isoflux models are used to separate soil evaporation from transpiration in ecosystems. These models often assume that plant transpiration occurs at isotopic steady state, i.e. that the transpired water shows the same isotopic signature as the source water. Yet, several studies found that transpiration did not occur at isotopic steady state, under both controlled and field conditions. Here we focused on identifying the internal and external factors which drive the isotopic signature of leaf transpiration. Using cavity ring-down spectroscopy (CRDS), the effect of both environmental variables and leaf physiological traits on δ18OT was investigated under controlled conditions. Six plant species with distinct leaf physiological traits were exposed to step changes in relative air humidity (RH), their response in δ18OT and gas exchange parameters and their leaf physiological traits were assessed. Moreover, two functionally distinct plant types (tree, i.e. Quercus suber, and grassland) of a semi-arid Mediterranean oak-woodland where observed under natural conditions throughout an entire growth period in the field. The species differed substantially in their leaf physiological traits and their turn-over times of leaf water. They could be grouped in species with fast (240 min.) turn-over times, mostly due to differences in stomatal conductance, leaf water content or a combination of both. Changes in RH caused an immediate response in δ18OT, which were similarly strong in all species, while leaf physiological traits affected the subsequent response in δ18OT. The turn-over time of leaf water determined the speed of return to the isotopic steady or a stable δ18OT value (Dubbert & Kübert et al., in prep.). Under natural conditions, changes in environmental conditions over the diurnal cycle had a huge impact on the diurnal development of δ18OT in both observed plant functional types. However, in

  14. A quantum mechanical flux correlation approach to steady-state transport rates in molecular junctions

    Energy Technology Data Exchange (ETDEWEB)

    Caspary Toroker, Maytal [Schulich Faculty of Chemistry, Lise Meitner Center for Computational Quantum Chemistry, Technion-Israel Institute of Technology, Haifa 32000 (Israel); Peskin, Uri, E-mail: uri@tx.technion.ac.il [Schulich Faculty of Chemistry, Lise Meitner Center for Computational Quantum Chemistry, Technion-Israel Institute of Technology, Haifa 32000 (Israel)

    2010-05-12

    A time-dependent approach for the calculation of steady-state currents through molecular junctions is presented. Using the close analogy between electronic currents and thermal reactive scattering rates, algorithms and methodologies originally developed for calculations of thermal reaction rates are utilized for electronic transport calculations. Resonant transport is considered in detail, in view of the dominant contribution of resonance states to the current in molecular junctions. The problem of long-time delays due to population of long-lived resonances is a challenge for most time-dependent calculation of steady-state currents, involving an infinite time-limit. A solution to this problem is presented by reformulating a flux-averaging method for the molecular junction scenario. The new formulation is implemented for commonly used simple tight binding models of molecular junctions, demonstrating its numerical advantages.

  15. Nonequilibrium steady state of biochemical cycle kinetics under non-isothermal conditions

    CERN Document Server

    Jin, Xiao

    2016-01-01

    Nonequilibrium steady state of isothermal biochemical cycle kinetics has been extensively studied, but much less investigated under non-isothermal conditions. However, once the heat exchange between subsystems is rather slow, the isothermal assumption of the whole system meets great challenge, which is indeed the case inside many kinds of living organisms. Here we generalize the nonequilibrium steady-state theory of isothermal biochemical cycle kinetics, in the master-equation models, to the situation in which the temperatures of subsystems can be far from uniform. We first obtain a new thermodynamic relation between the chemical reaction rates and thermodynamic potentials under such a non-isothermal circumstances, which immediately implies simply applying the isothermal transition-state rate formula for each chemical reaction in terms of only the reactants' temperature, is not thermodynamically consistent. Therefore, we mathematically derive several revised reaction-rate formulas which not only obey the new ...

  16. Iterative Observer-based Estimation Algorithms for Steady-State Elliptic Partial Differential Equation Systems

    KAUST Repository

    Majeed, Muhammad Usman

    2017-07-19

    Steady-state elliptic partial differential equations (PDEs) are frequently used to model a diverse range of physical phenomena. The source and boundary data estimation problems for such PDE systems are of prime interest in various engineering disciplines including biomedical engineering, mechanics of materials and earth sciences. Almost all existing solution strategies for such problems can be broadly classified as optimization-based techniques, which are computationally heavy especially when the problems are formulated on higher dimensional space domains. However, in this dissertation, feedback based state estimation algorithms, known as state observers, are developed to solve such steady-state problems using one of the space variables as time-like. In this regard, first, an iterative observer algorithm is developed that sweeps over regular-shaped domains and solves boundary estimation problems for steady-state Laplace equation. It is well-known that source and boundary estimation problems for the elliptic PDEs are highly sensitive to noise in the data. For this, an optimal iterative observer algorithm, which is a robust counterpart of the iterative observer, is presented to tackle the ill-posedness due to noise. The iterative observer algorithm and the optimal iterative algorithm are then used to solve source localization and estimation problems for Poisson equation for noise-free and noisy data cases respectively. Next, a divide and conquer approach is developed for three-dimensional domains with two congruent parallel surfaces to solve the boundary and the source data estimation problems for the steady-state Laplace and Poisson kind of systems respectively. Theoretical results are shown using a functional analysis framework, and consistent numerical simulation results are presented for several test cases using finite difference discretization schemes.

  17. Steady state fractionation of heavy noble gas isotopes in a deep unsaturated zone

    Science.gov (United States)

    Seltzer, Alan M.; Severinghaus, Jeffrey P.; Andraski, Brian J.; Stonestrom, David A.

    2017-01-01

    To explore steady state fractionation processes in the unsaturated zone (UZ), we measured argon, krypton, and xenon isotope ratios throughout a ∼110 m deep UZ at the United States Geological Survey (USGS) Amargosa Desert Research Site (ADRS) in Nevada, USA. Prior work has suggested that gravitational settling should create a nearly linear increase in heavy-to-light isotope ratios toward the bottom of stagnant air columns in porous media. Our high-precision measurements revealed a binary mixture between (1) expected steady state isotopic compositions and (2) unfractionated atmospheric air. We hypothesize that the presence of an unsealed pipe connecting the surface to the water table allowed for direct inflow of surface air in response to extensive UZ gas sampling prior to our first (2015) measurements. Observed isotopic resettling in deep UZ samples collected a year later, after sealing the pipe, supports this interpretation. Data and modeling each suggest that the strong influence of gravitational settling and weaker influences of thermal diffusion and fluxes of CO2 and water vapor accurately describe steady state isotopic fractionation of argon, krypton, and xenon within the UZ. The data confirm that heavy noble gas isotopes are sensitive indicators of UZ depth. Based on this finding, we outline a potential inverse approach to quantify past water table depths from noble gas isotope measurements in paleogroundwater, after accounting for fractionation during dissolution of UZ air and bubbles.

  18. Steady state fractionation of heavy noble gas isotopes in a deep unsaturated zone

    Science.gov (United States)

    Seltzer, Alan M.; Severinghaus, Jeffrey P.; Andraski, Brian J.; Stonestrom, David A.

    2017-04-01

    To explore steady state fractionation processes in the unsaturated zone (UZ), we measured argon, krypton, and xenon isotope ratios throughout a ˜110 m deep UZ at the United States Geological Survey (USGS) Amargosa Desert Research Site (ADRS) in Nevada, USA. Prior work has suggested that gravitational settling should create a nearly linear increase in heavy-to-light isotope ratios toward the bottom of stagnant air columns in porous media. Our high-precision measurements revealed a binary mixture between (1) expected steady state isotopic compositions and (2) unfractionated atmospheric air. We hypothesize that the presence of an unsealed pipe connecting the surface to the water table allowed for direct inflow of surface air in response to extensive UZ gas sampling prior to our first (2015) measurements. Observed isotopic resettling in deep UZ samples collected a year later, after sealing the pipe, supports this interpretation. Data and modeling each suggest that the strong influence of gravitational settling and weaker influences of thermal diffusion and fluxes of CO2 and water vapor accurately describe steady state isotopic fractionation of argon, krypton, and xenon within the UZ. The data confirm that heavy noble gas isotopes are sensitive indicators of UZ depth. Based on this finding, we outline a potential inverse approach to quantify past water table depths from noble gas isotope measurements in paleogroundwater, after accounting for fractionation during dissolution of UZ air and bubbles.

  19. Stochastic pumping of non-equilibrium steady-states: how molecules adapt to a fluctuating environment.

    Science.gov (United States)

    Astumian, R D

    2018-01-11

    In the absence of input energy, a chemical reaction in a closed system ineluctably relaxes toward an equilibrium state governed by a Boltzmann distribution. The addition of a catalyst to the system provides a way for more rapid equilibration toward this distribution, but the catalyst can never, in and of itself, drive the system away from equilibrium. In the presence of external fluctuations, however, a macromolecular catalyst (e.g., an enzyme) can absorb energy and drive the formation of a steady state between reactant and product that is not determined solely by their relative energies. Due to the ubiquity of non-equilibrium steady states in living systems, the development of a theory for the effects of external fluctuations on chemical systems has been a longstanding focus of non-equilibrium thermodynamics. The theory of stochastic pumping has provided insight into how a non-equilibrium steady-state can be formed and maintained in the presence of dissipation and kinetic asymmetry. This effort has been greatly enhanced by a confluence of experimental and theoretical work on synthetic molecular machines designed explicitly to harness external energy to drive non-equilibrium transport and self-assembly.

  20. Revisiting the Potential of Alternating Repetition Time Balanced Steady-State Free Precession Imaging of the Abdomen at 3 T

    NARCIS (Netherlands)

    Gurney-Champion, Oliver J.; Nederveen, Aart J.; Klaassen, Remy; Engelbrecht, Marc R.; Bel, Arjan; van Laarhoven, Hanneke W. M.; Stoker, Jaap; Goncalves, Sonia I.

    2016-01-01

    The aim was to investigate the value of optimized 3-dimensional alternating repetition time balanced steady-state free precession (ATR-SSFP), as an alternative to conventional segmented balanced steady-state free precession (bSSFP) with fat suppression prepulse (FS-bSSFP), in single breath-hold

  1. Distraction task rather than focal attention modulates gamma activity associated with auditory steady-state responses (ASSRs)

    DEFF Research Database (Denmark)

    Griskova-Bulanova, Inga; Ruksenas, Osvaldas; Dapsys, Kastytis

    2011-01-01

    To explore the modulation of auditory steady-state response (ASSR) by experimental tasks, differing in attentional focus and arousal level.......To explore the modulation of auditory steady-state response (ASSR) by experimental tasks, differing in attentional focus and arousal level....

  2. Dynamic fluid connectivity during steady-state multiphase flow in a sandstone.

    Science.gov (United States)

    Reynolds, Catriona A; Menke, Hannah; Andrew, Matthew; Blunt, Martin J; Krevor, Samuel

    2017-08-01

    The current conceptual picture of steady-state multiphase Darcy flow in porous media is that the fluid phases organize into separate flow pathways with stable interfaces. Here we demonstrate a previously unobserved type of steady-state flow behavior, which we term "dynamic connectivity," using fast pore-scale X-ray imaging. We image the flow of N 2 and brine through a permeable sandstone at subsurface reservoir conditions, and low capillary numbers, and at constant fluid saturation. At any instant, the network of pores filled with the nonwetting phase is not necessarily connected. Flow occurs along pathways that periodically reconnect, like cars controlled by traffic lights. This behavior is consistent with an energy balance, where some of the energy of the injected fluids is sporadically converted to create new interfaces.

  3. Steady State Thermo-Hydrodynamic Analysis of Two-Axial groove and Multilobe Hydrodynamic Bearings

    Directory of Open Access Journals (Sweden)

    C. Bhagat

    2014-12-01

    Full Text Available Steady state thermo-hydrodynamic analysis of two axial groove and multi lobe oil journal bearings is performed in this paper. To study the steady state thermo-hydrodynamic characteristics Reynolds equation is solved simultaneously along with the energy equation and heat conduction equation in bush and shaft. The effect of groove geometry, cavitation in the fluid film, the recirculation of lubricant, shaft speed has also been taken into account. Film temperature in case of three-lobe bearing is found to be high as compared to other studied bearing configurations. The data obtained from this analysis can be used conveniently in the design of such bearings, which are presented in dimensionless form.

  4. Basis adaptation and domain decomposition for steady-state partial differential equations with random coefficients

    Science.gov (United States)

    Tipireddy, R.; Stinis, P.; Tartakovsky, A. M.

    2017-12-01

    We present a novel approach for solving steady-state stochastic partial differential equations in high-dimensional random parameter space. The proposed approach combines spatial domain decomposition with basis adaptation for each subdomain. The basis adaptation is used to address the curse of dimensionality by constructing an accurate low-dimensional representation of the stochastic PDE solution (probability density function and/or its leading statistical moments) in each subdomain. Restricting the basis adaptation to a specific subdomain affords finding a locally accurate solution. Then, the solutions from all of the subdomains are stitched together to provide a global solution. We support our construction with numerical experiments for a steady-state diffusion equation with a random spatially dependent coefficient. Our results show that accurate global solutions can be obtained with significantly reduced computational costs.

  5. Steady-state and transient heat transfer through fins of complex geometry

    Directory of Open Access Journals (Sweden)

    Taler Dawid

    2014-06-01

    Full Text Available Various methods for steady-state and transient analysis of temperature distribution and efficiency of continuous-plate fins are presented. For a constant heat transfer coefficient over the fin surface, the plate fin can be divided into imaginary rectangular or hexangular fins. At first approximate methods for determining the steady-state fin efficiency like the method of equivalent circular fin and the sector method are discussed. When the fin geometry is complex, thus transient temperature distribution and fin efficiency can be determined using numerical methods. A numerical method for transient analysis of fins with complex geometry is developed. Transient temperature distributions in continuous fins attached to oval tubes is computed using the finite volume - finite element methods. The developed method can be used in the transient analysis of compact heat exchangers to calculate correctly the heat flow rate transferred from the finned tubes to the fluid.

  6. Influence of non-steady state during isoglycemic hyperinsulinemic clamp in hypertension. A LIFE substudy

    DEFF Research Database (Denmark)

    Olsen, M H; Andersen, U B; Wachtell, K

    1999-01-01

    We wanted to investigate whether time to steady state was reached within 2 h of insulin infusion during isoglycemic hyperinsulinemic clamp, comparing the glucose uptake index (M/IG) with Bergman's insulin sensitivity index (Sip). We performed a 2-h oral glucose tolerance test and a 3-h isoglycemic...... hyperinsulinemic clamp in 26 young, healthy subjects and 43 elderly patients with unmedicated essential hypertension and left ventricular hypertrophy. The 3-h Sip correlated strongly with the 2-h M/IG in the patients (r = 0.88, p .... Because the 2-h M/IG correlated strongly with the 3-h Sip with relatively narrow limits of agreement, it is a good measure of insulin sensitivity. However, a 2-h clamp results in lower insulin sensitivity values in elderly, hypertensive patients due to the fact that steady state is not reached...

  7. On the steady-state and the transient decay methods for the estimation of reverberation time.

    Science.gov (United States)

    Sum, K S; Pan, J

    2002-12-01

    The discrepancy between reverberation times of an enclosed sound field measured by the steady-state method and by the transient decay method is well-known. So far, no clear explanation has been obtained. In this paper, the steady-state bandlimited energy in an enclosure and bandlimited power flow into modally reactive boundaries are derived to describe the energy balance relationship and thus the reverberation time in a frequency band. This reverberation time is then compared to that obtained from the transient decay of the sound field based on the modal analysis. The comparison provides an understanding of the discrepancy mentioned above as well as the physical interpretations of the reverberation times estimated by both methods.

  8. Analytical, steady-state model of gain saturation in channel electron multipliers

    CERN Document Server

    Giudicotti, L

    2002-01-01

    By using the transmission line modeling (TLM) technique we derive a simple model describing the saturation of the gain in channel electron multipliers and show that it generalizes and extends a previous steady-state model due to Shikhaliev. Then by introducing a physically consistent rational approximation of the non-linear gain equation we derive an exact, steady-state, analytical solution in which, contrary to other empirical assumptions about the functional dependence of the internal voltage are not required. The model is then used to simulate a multianode microchannel plate (MCP) photomultiplier, showing that the computed gain in saturated conditions is qualitatively in agreement with published experimental data. Finally, we discuss the general validity of our model, we suggest possible measurements and comment existing data relevant for its validation.

  9. Homogenization of steady-state creep of porous metals using three-dimensional microstructural reconstructions

    DEFF Research Database (Denmark)

    Kwok, Kawai; Boccaccini, Dino; Persson, Åsa Helen

    2016-01-01

    The effective steady-state creep response of porous metals is studied by numerical homogenization and analytical modeling in this paper. The numerical homogenization is based on finite element models of three-dimensional microstructures directly reconstructed from tomographic images. The effects...... of model size, representativeness, and boundary conditions on the numerical results are investigated. Two analytical models for creep rate of porous bodies are derived by extending the Hashin-Shtrikman bound and the Ramakrishnan-Arunchalam model in linear elasticity to steady-state creep based on nonlinear...... homogenization. The numerical homogenization prediction and analytical models obtained in this work are compared against reported measurements and models. The relationship between creep rate and porosity computed by homogenization is found to be bounded by the Hodge-Dunand model and the Hashin-Shtrikman creep...

  10. Dynamic fluid connectivity during steady-state multiphase flow in a sandstone

    Science.gov (United States)

    Reynolds, Catriona A.; Menke, Hannah; Andrew, Matthew; Blunt, Martin J.; Krevor, Samuel

    2017-08-01

    The current conceptual picture of steady-state multiphase Darcy flow in porous media is that the fluid phases organize into separate flow pathways with stable interfaces. Here we demonstrate a previously unobserved type of steady-state flow behavior, which we term “dynamic connectivity,” using fast pore-scale X-ray imaging. We image the flow of N2 and brine through a permeable sandstone at subsurface reservoir conditions, and low capillary numbers, and at constant fluid saturation. At any instant, the network of pores filled with the nonwetting phase is not necessarily connected. Flow occurs along pathways that periodically reconnect, like cars controlled by traffic lights. This behavior is consistent with an energy balance, where some of the energy of the injected fluids is sporadically converted to create new interfaces.

  11. Basis adaptation and domain decomposition for steady-state partial differential equations with random coefficients

    Energy Technology Data Exchange (ETDEWEB)

    Tipireddy, R.; Stinis, P.; Tartakovsky, A. M.

    2017-12-01

    We present a novel approach for solving steady-state stochastic partial differential equations (PDEs) with high-dimensional random parameter space. The proposed approach combines spatial domain decomposition with basis adaptation for each subdomain. The basis adaptation is used to address the curse of dimensionality by constructing an accurate low-dimensional representation of the stochastic PDE solution (probability density function and/or its leading statistical moments) in each subdomain. Restricting the basis adaptation to a specific subdomain affords finding a locally accurate solution. Then, the solutions from all of the subdomains are stitched together to provide a global solution. We support our construction with numerical experiments for a steady-state diffusion equation with a random spatially dependent coefficient. Our results show that highly accurate global solutions can be obtained with significantly reduced computational costs.

  12. Wavelet Based Analytical Expressions to Steady State Biofilm Model Arising in Biochemical Engineering.

    Science.gov (United States)

    Padma, S; Hariharan, G

    2016-06-01

    In this paper, we have developed an efficient wavelet based approximation method to biofilm model under steady state arising in enzyme kinetics. Chebyshev wavelet based approximation method is successfully introduced in solving nonlinear steady state biofilm reaction model. To the best of our knowledge, until now there is no rigorous wavelet based solution has been addressed for the proposed model. Analytical solutions for substrate concentration have been derived for all values of the parameters δ and SL. The power of the manageable method is confirmed. Some numerical examples are presented to demonstrate the validity and applicability of the wavelet method. Moreover the use of Chebyshev wavelets is found to be simple, efficient, flexible, convenient, small computation costs and computationally attractive.

  13. Comparison of steady-state and transient CVS cycle emission of an automotive Stirling engine

    Science.gov (United States)

    Farrell, R. A.; Bolton, R. J.

    1983-01-01

    The Automotive Stirling Engine Development Program is to demonstrate a number of goals for a Stirling-powered vehicle. These goals are related to an achievement of specified maximum emission rates, a combined cycle fuel economy 30 percent better than a comparable internal-combustion engine-powered automobile, multifuel capability, competitive cost and reliability, and a meeting of Federal standards concerning noise and safety. The present investigation is concerned with efforts related to meeting the stringent emission goals. Attention is given to the initial development of a procedure for predicting transient CVS urban cycle gaseous emissions from steady-state engine data, taking into account the employment of the test data from the first-generation automotive Stirling engine. A large amount of steady-state data from three Mod I automotive Stirling engines were used to predict urban CVS cycle emissions for the Mod I Lerma vehicle.

  14. On the steady-state and the transient decay methods for the estimation of reverberation time

    Science.gov (United States)

    Sum, K. S.; Pan, J.

    2002-12-01

    The discrepancy between reverberation times of an enclosed sound field measured by the steady-state method and by the transient decay method is well-known. So far, no clear explanation has been obtained. In this paper, the steady-state bandlimited energy in an enclosure and bandlimited power flow into modally reactive boundaries are derived to describe the energy balance relationship and thus the reverberation time in a frequency band. This reverberation time is then compared to that obtained from the transient decay of the sound field based on the modal analysis. The comparison provides an understanding of the discrepancy mentioned above as well as the physical interpretations of the reverberation times estimated by both methods.

  15. Quantum transport in networks and photosynthetic complexes at the steady state.

    Directory of Open Access Journals (Sweden)

    Daniel Manzano

    Full Text Available Recently, several works have analysed the efficiency of photosynthetic complexes in a transient scenario and how that efficiency is affected by environmental noise. Here, following a quantum master equation approach, we study the energy and excitation transport in fully connected networks both in general and in the particular case of the Fenna-Matthew-Olson complex. The analysis is carried out for the steady state of the system where the excitation energy is constantly "flowing" through the system. Steady state transport scenarios are particularly relevant if the evolution of the quantum system is not conditioned on the arrival of individual excitations. By adding dephasing to the system, we analyse the possibility of noise-enhancement of the quantum transport.

  16. Chaos and optimal control of cancer self-remission and tumor system steady states

    Energy Technology Data Exchange (ETDEWEB)

    El-Gohary, Awad [Department of Mathematics, College of Science, Mansoura University, Mansoura 35516 (Egypt)], E-mail: aigohary@ksu.edu.sa

    2008-09-15

    This paper is devoted to study the problem of optimal control of cancer self-remission and tumor unstable steady-states. The stability analysis of the biologically feasible equilibrium states is presented using a local stability approach. The system appears exhibit a chaotic behavior for some ranges of the system parameters. The necessary optimal control inputs for the asymptotic stability of the positive equilibrium states and minimizes the require performance measure are obtained as nonlinear function of the system densities. Analysis and extensive numerical examples of the uncontrolled and controlled systems were carried out for various parameters values and different initial densities.

  17. Some Considerations on the Fundamentals of Chemical Kinetics: Steady State, Quasi-Equilibrium, and Transition State Theory

    Science.gov (United States)

    Perez-Benito, Joaquin F.

    2017-01-01

    The elementary reaction sequence A ? I ? Products is the simplest mechanism for which the steady-state and quasi-equilibrium kinetic approximations can be applied. The exact integrated solutions for this chemical system allow inferring the conditions that must fulfill the rate constants for the different approximations to hold. A graphical…

  18. Steady State Crack Propagation in Layered Material Systems Displaying Visco-plastic Behaviour

    DEFF Research Database (Denmark)

    Nielsen, Kim Lau

    2012-01-01

    The steady state fracture toughness of elastic visco-plastic materials is studied numerically, using both a conventional and a higher order model. Focus is on the combined effect of strain hardening, strain gradient hardening and strain rate hardening on cracking in layered material systems......, and predictions for the crack tip shielding ratio is brought forward. Included is a novel procedure for extracting information on the rate-independent toughness without approaching this numerically cumbersome limit....

  19. On the relationship of steady states of continuous and discrete models arising from biology.

    Science.gov (United States)

    Veliz-Cuba, Alan; Arthur, Joseph; Hochstetler, Laura; Klomps, Victoria; Korpi, Erikka

    2012-12-01

    For many biological systems that have been modeled using continuous and discrete models, it has been shown that such models have similar dynamical properties. In this paper, we prove that this happens in more general cases. We show that under some conditions there is a bijection between the steady states of continuous and discrete models arising from biological systems. Our results also provide a novel method to analyze certain classes of nonlinear models using discrete mathematics.

  20. Steady-State Noise Analysis of Spontaneous and Stimulated Brillouin Scattering in Optical Fibers

    Science.gov (United States)

    Jenkins, R. Brian; Sova, Raymond M.; Joseph, Richard I.

    2007-03-01

    In this paper, we present a steady-state theoretical and experimental analysis of the noise resulting from spontaneous and stimulated Brillouin scattering in an optical fiber. Wave equations are derived and solved that describe the evolution of the pump and Stokes waves along the fiber. Experiments and numerical results demonstrate the validity of the theory, either when a Stokes wave is launched at the end of the fiber or when the noise in the Stokes wave is spontaneously generated.

  1. Restitution slope is principally determined by steady-state action potential duration.

    Science.gov (United States)

    Shattock, Michael J; Park, Kyung Chan; Yang, Hsiang-Yu; Lee, Angela W C; Niederer, Steven; MacLeod, Kenneth T; Winter, James

    2017-06-01

    The steepness of the action potential duration (APD) restitution curve and local tissue refractoriness are both thought to play important roles in arrhythmogenesis. Despite this, there has been little recognition of the apparent association between steady-state APD and the slope of the restitution curve. The objective of this study was to test the hypothesis that restitution slope is determined by APD and to examine the relationship between restitution slope, refractoriness and susceptibility to VF. Experiments were conducted in isolated hearts and ventricular myocytes from adult guinea pigs and rabbits. Restitution curves were measured under control conditions and following intervention to prolong (clofilium, veratridine, bretylium, low [Ca]e, chronic transverse aortic constriction) or shorten (catecholamines, rapid pacing) ventricular APD. Despite markedly differing mechanisms of action, all interventions that prolonged the action potential led to a steepening of the restitution curve (and vice versa). Normalizing the restitution curve as a % of steady-state APD abolished the difference in restitution curves with all interventions. Effects on restitution were preserved when APD was modulated by current injection in myocytes pre-treated with the calcium chelator BAPTA-AM - to abolish the intracellular calcium transient. The non-linear relation between APD and the rate of repolarization of the action potential is shown to underpin the common influence of APD on the slope of the restitution curve. Susceptibility to VF was found to parallel changes in APD/refractoriness, rather than restitution slope. Steady-state APD is the principal determinant of the slope of the ventricular electrical restitution curve. In the absence of post-repolarization refractoriness, factors that prolong the action potential would be expected to steepen the restitution curve. However, concomitant changes in tissue refractoriness act to reduce susceptibility to sustained VF. Dependence on

  2. Infinite product expansion of the Fokker-Planck equation with steady-state solution.

    Science.gov (United States)

    Martin, R J; Craster, R V; Kearney, M J

    2015-07-08

    We present an analytical technique for solving Fokker-Planck equations that have a steady-state solution by representing the solution as an infinite product rather than, as usual, an infinite sum. This method has many advantages: automatically ensuring positivity of the resulting approximation, and by design exactly matching both the short- and long-term behaviour. The efficacy of the technique is demonstrated via comparisons with computations of typical examples.

  3. Transient dynamics and steady state behavior of the Anderson-Holstein model with a superconducting lead

    Science.gov (United States)

    Albrecht, K. F.; Soller, H.; Mühlbacher, L.; Komnik, A.

    2013-12-01

    We analyze the nonequilibrium dynamics and steady-state behavior of the two-terminal Anderson-Holstein model with a superconducting and a normal conducting lead. In the deep Kondo limit we develop an analytical description if no phonons are included and a rate equation approach when phonons are present. Both cases are compared with the numerically exact diagrammatic Monte Carlo method obtaining a good agreement. For small voltages we find a pronounced enhancement of phonon sidebands due to the SC DOS.

  4. Characterization of the TRIGA Mark II reactor full-power steady state

    OpenAIRE

    Cammi, Antonio; Zanetti, Matteo; Chiesa, Davide; Clemenza, Massimiliano; Pozzi, Stefano; Previtali, Ezio; Sisti, Monica; Magrotti, Giovanni; Prata, Michele; Salvini, Andrea

    2015-01-01

    In this work, the characterization of the full-power steady state of the TRIGA Mark II nuclear reactor of the University of Pavia is performed by coupling Monte Carlo (MC) simulation for neutronics with "Multiphysics" model for thermal-hydraulics. Neutronic analyses have been performed starting from a MC model of the entire reactor system, based on the MCNP5 code, that was already validated in fresh fuel and zero-power configuration (in which thermal effects are negligible) using the availabl...

  5. Steady State Analysis of Hydrazine Catalytic Thrusters for Different Types of Catalysts

    Science.gov (United States)

    1976-01-15

    AD-A023 231 STEADY STATE ANALYSIS OF HYDRAZINE CATALYTIC THRUSTERS FOR DIFFERENT TYPES OF CATALYSTS Antonio Crespo Instituto Nacional de Tecnica... ANALYSIS OF HYDRAZINE CATALYTIC -1 Jan 1975-30 June 1975 THRUSTERS FOR -DIFFERENT TYPES OF CATALYSTS 6. PERFORMING ORG. ftZPORT NU~n ER...ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK- AREA A WORK UNIT NUMBERS .INSTITUTO NACIONAL DE TECRICA AERO) ESPACIAL (INTA) 681308 PASEOPINTOR ROSALES

  6. Stability of racemic and chiral steady states in open and closed chemical systems

    Energy Technology Data Exchange (ETDEWEB)

    Ribo, Josep M. [Departament de Quimica Organica, Universitat de Barcelona, c. Marti i Franques 1, Barcelona (Spain); Hochberg, David [Centro de Astrobiologia (CSIC-INTA), Ctra. Ajalvir Km. 4, 28850 Torrejon de Ardoz, Madrid (Spain)], E-mail: hochbergd@inta.es

    2008-12-22

    The stability properties of models of spontaneous mirror symmetry breaking in chemistry are characterized algebraically. The models considered here all derive either from the Frank model or from autocatalysis with limited enantioselectivity. Emphasis is given to identifying the critical parameter controlling the chiral symmetry breaking transition from racemic to chiral steady-state solutions. This parameter is identified in each case, and the constraints on the chemical rate constants determined from dynamic stability are derived.

  7. Particle diffusion and localized acceleration in inhomogeneous AGN jets - Part I: Steady-state spectra

    OpenAIRE

    Chen, Xuhui; Pohl, Martin; Boettcher, Markus

    2014-01-01

    We study the acceleration, transport, and emission of particles in relativistic jets. Localized stochastic particle acceleration, spatial diffusion, and synchrotron as well as synchrotron self-Compton emission are considered in a leptonic model. To account for inhomogeneity, we use a 2D axi-symmetric cylindrical geometry for both relativistic electrons and magnetic field. In this first phase of our work, we focus on steady-state spectra that develop from a time-dependent model. We demonstrate...

  8. New Methods for Processing and Quantifying VO2 Kinetics to Steady State: VO2 Onset Kinetics

    Science.gov (United States)

    McNulty, Craig R.; Robergs, Robert A.

    2017-01-01

    Current methods of oxygen uptake (VO2) kinetics data handling may be too simplistic for the complex physiology involved in the underlying physiological processes. Therefore, the aim of this study was to quantify the VO2 kinetics to steady state across the full range of sub-ventilatory threshold work rates, with a particular focus on the VO2 onset kinetics. Ten healthy, moderately trained males participated in five bouts of cycling. Each bout involved 10 min at a percentage of the subject's ventilation threshold (30, 45, 60, 75, 90%) from unloaded cycling. The VO2 kinetics was quantified using the conventional mono-exponential time constant (tau, τ), as well as the new methods for VO2 onset kinetics. Compared to linear modeling, non-linear modeling caused a deterioration of goodness of fit (main effect, p kinetics were also improved using a modified application of the mono-exponential model (main effect, p kinetics data is similar across all subjects and absolute exercise intensities, and thereby independent of subject fitness and τ. This could indicate that there are no functional limitations between subjects during this onset phase, with limitations occurring for the latter transition to steady state. Finally, the continuing use of mono-exponential modeling could mask important underlying physiology of more instantaneous VO2 responses to steady state. Consequently, further research should be conducted on this new approach to VO2 onset kinetics. PMID:29018361

  9. The Effects of High Intensity Interval Training vs Steady State Training on Aerobic and Anaerobic Capacity

    Directory of Open Access Journals (Sweden)

    Carl Foster, Courtney V. Farland, Flavia Guidotti, Michelle Harbin, Brianna Roberts, Jeff Schuette, Andrew Tuuri, Scott T. Doberstein, John P. Porcari

    2015-12-01

    Full Text Available High intensity interval training (HIIT has become an increasingly popular form of exercise due to its potentially large effects on exercise capacity and small time requirement. This study compared the effects of two HIIT protocols vs steady-state training on aerobic and anaerobic capacity following 8-weeks of training. Fifty-five untrained college-aged subjects were randomly assigned to three training groups (3x weekly. Steady-state (n = 19 exercised (cycle ergometer 20 minutes at 90% of ventilatory threshold (VT. Tabata (n = 21 completed eight intervals of 20s at 170% VO2max/10s rest. Meyer (n = 15 completed 13 sets of 30s (20 min @ 100% PVO2 max/ 60s recovery, average PO = 90% VT. Each subject did 24 training sessions during 8 weeks. Results: There were significant (p < 0.05 increases in VO2max (+19, +18 and +18% and PPO (+17, +24 and +14% for each training group, as well as significant increases in peak (+8, + 9 and +5% & mean (+4, +7 and +6% power during Wingate testing, but no significant differences between groups. Measures of the enjoyment of the training program indicated that the Tabata protocol was significantly less enjoyable (p < 0.05 than the steady state and Meyer protocols, and that the enjoyment of all protocols declined (p < 0.05 across the duration of the study. The results suggest that although HIIT protocols are time efficient, they are not superior to conventional exercise training in sedentary young adults.

  10. Lower bounds for ballistic current and noise in non-equilibrium quantum steady states

    Energy Technology Data Exchange (ETDEWEB)

    Doyon, Benjamin, E-mail: benjamin.doyon@kcl.ac.uk

    2015-03-15

    Let an infinite, homogeneous, many-body quantum system be unitarily evolved for a long time from a state where two halves are independently thermalized. One says that a non-equilibrium steady state emerges if there are nonzero steady currents in the central region. In particular, their presence is a signature of ballistic transport. We analyze the consequences of the current observable being a conserved density; near equilibrium this is known to give rise to linear wave propagation and a nonzero Drude peak. Using the Lieb–Robinson bound, we derive, under a certain regularity condition, a lower bound for the non-equilibrium steady-state current determined by equilibrium averages. This shows and quantifies the presence of ballistic transport far from equilibrium. The inequality suggests the definition of “nonlinear sound velocities”, which specialize to the sound velocity near equilibrium in non-integrable models, and “generalized sound velocities”, which encode generalized Gibbs thermalization in integrable models. These are bounded by the Lieb–Robinson velocity. The inequality also gives rise to a bound on the energy current noise in the case of pure energy transport. We show that the inequality is satisfied in many models where exact results are available, and that it is saturated at one-dimensional criticality.

  11. Study of impurity effects on CFETR steady-state scenario by self-consistent integrated modeling

    Science.gov (United States)

    Shi, Nan; Chan, Vincent S.; Jian, Xiang; Li, Guoqiang; Chen, Jiale; Gao, Xiang; Shi, Shengyu; Kong, Defeng; Liu, Xiaoju; Mao, Shifeng; Xu, Guoliang

    2017-12-01

    Impurity effects on fusion performance of China fusion engineering test reactor (CFETR) due to extrinsic seeding are investigated. An integrated 1.5D modeling workflow evolves plasma equilibrium and all transport channels to steady state. The one modeling framework for integrated tasks framework is used to couple the transport solver, MHD equilibrium solver, and source and sink calculations. A self-consistent impurity profile constructed using a steady-state background plasma, which satisfies quasi-neutrality and true steady state, is presented for the first time. Studies are performed based on an optimized fully non-inductive scenario with varying concentrations of Argon (Ar) seeding. It is found that fusion performance improves before dropping off with increasing {{Z}\\text{eff}} , while the confinement remains at high level. Further analysis of transport for these plasmas shows that low-k ion temperature gradient modes dominate the turbulence. The decrease in linear growth rate and resultant fluxes of all channels with increasing {{Z}\\text{eff}} can be traced to impurity profile change by transport. The improvement in confinement levels off at higher {{Z}\\text{eff}} . Over the regime of study there is a competition between the suppressed transport and increasing radiation that leads to a peak in the fusion performance at {{Z}\\text{eff}} (~2.78 for CFETR). Extrinsic impurity seeding to control divertor heat load will need to be optimized around this value for best fusion performance.

  12. Phase-field study of three-dimensional steady-state growth shapes in directional solidification

    Science.gov (United States)

    Gurevich, Sebastian; Karma, Alain; Plapp, Mathis; Trivedi, Rohit

    2010-01-01

    We use a quantitative phase-field approach to study directional solidification in various three-dimensional geometries for realistic parameters of a transparent binary alloy. The geometries are designed to study the steady-state growth of spatially extended hexagonal arrays, linear arrays in thin samples, and axisymmetric shapes constrained in a tube. As a basis to address issues of dynamical pattern selection, the phase-field simulations are specifically geared to identify ranges of primary spacings for the formation of the classically observed “fingers” (deep cells) with blunt tips and “needles” with parabolic tips. Three distinct growth regimes are identified that include a low-velocity regime with only fingers forming, a second intermediate-velocity regime characterized by coexistence of fingers and needles that exist on separate branches of steady-state growth solutions for small and large spacings, respectively, and a third high-velocity regime where those two branches merge into a single one. Along the latter, the growth shape changes continuously from fingerlike to needlelike with increasing spacing. These regimes are strongly influenced by crystalline anisotropy with the third regime extending to lower velocity for larger anisotropy. Remarkably, however, steady-state shapes and tip undercoolings are only weakly dependent on the growth geometry. Those results are used to test existing theories of directional finger growth as well as to interpret the hysteretic nature of the cell-to-dendrite transition.

  13. Approximate P3 solution for the semi-infinite medium: steady state and time domain.

    Science.gov (United States)

    Wang, Xichang

    2017-09-01

    The steady-state solution of the Green's function obtained by the P3 equation in a semi-infinite medium is presented, the proposed solution is a diffusion-based model. Two time-domain solutions are established: one is the solution under extrapolation boundary condition, which we call the optical parameter method, and the other corresponds to the diffusion equation, which we call the double-diffusion coefficient method. The spatial-resolved reflectance and the time-resolved reflectance are calculated. The Monte Carlo simulation is used to verify the P3 equation. The results show that the P3 steady-state equation and the two time-domain equations are in good agreement with the Monte Carlo simulation. In the steady state, when the distance between the detector and the light source is less than several free paths, the P3 equation is more accurate than the diffusion equation. In other cases, the P3 model and the diffusion model have similar results. However, when the absorption coefficient is large, P3 is more accurate. In the time domain, the optical parameter method is more accurate, and the double-diffusion coefficient method is more consistent with the diffusion equation. (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE).

  14. Steady state model and experiment for an oscillating grid turbulent two-layer stratified flow

    Science.gov (United States)

    Verso, Lilly; van Reeuwijk, Maarten; Liberzon, Alex

    2017-10-01

    Turbulence generated by an oscillating grid in a two-layer stably stratified system is a classical flow utilized to study various aspects of turbulence in presence of stratification without mean shear. This flow evolves in a quasisteady state, in which the layer thickness and density difference evolves in a quasisteady manner due to the large separation of timescales between the turbulence and the setup. We present an extension of the classical setup that enables full steady state conditions and in which the entrainment velocity can be prescribed separately from the Richardson number. We develop a theoretical box-model and show that the model is in good agreement with the experiments. The model allows to predict the transient response of the system for a variety of initial conditions and the imposed steady state. The new setup is necessary to obtain the steady position of the density interface, for example, when using advanced optical techniques to measure the small-scale features of turbulence near the interface.

  15. Arc plasma generator of atomic driver for steady-state negative ion source.

    Science.gov (United States)

    Ivanov, A A; Belchenko, Yu I; Davydenko, V I; Ivanov, I A; Kolmogorov, V V; Listopad, A A; Mishagin, V V; Putvinsky, S V; Shulzhenko, G I; Smirnov, A

    2014-02-01

    The paper reviews the results of development of steady-state arc-discharge plasma generator with directly heated LaB6 cathode. This arc-discharge plasma generator produces a plasma jet which is to be converted into an atomic one after recombination on a metallic plate. The plate is electrically biased relative to the plasma in order to control the atom energies. Such an intensive jet of hydrogen atoms can be used in negative ion sources for effective production of negative ions on a cesiated surface of plasma grid. All elements of the plasma generator have an augmented water cooling to operate in long pulse mode or in steady state. The thermo-mechanical stresses and deformations of the most critical elements of the plasma generator were determined by simulations. Magnetic field inside the discharge chamber was optimized to reduce the local power loads. The first tests of the steady-state arc plasma generator prototype have performed in long-pulse mode.

  16. Cluster Mean-Field Approach to the Steady-State Phase Diagram of Dissipative Spin Systems

    Directory of Open Access Journals (Sweden)

    Jiasen Jin

    2016-07-01

    Full Text Available We show that short-range correlations have a dramatic impact on the steady-state phase diagram of quantum driven-dissipative systems. This effect, never observed in equilibrium, follows from the fact that ordering in the steady state is of dynamical origin, and is established only at very long times, whereas in thermodynamic equilibrium it arises from the properties of the (free energy. To this end, by combining the cluster methods extensively used in equilibrium phase transitions to quantum trajectories and tensor-network techniques, we extend them to nonequilibrium phase transitions in dissipative many-body systems. We analyze in detail a model of spin-1/2 on a lattice interacting through an XYZ Hamiltonian, each of them coupled to an independent environment that induces incoherent spin flips. In the steady-state phase diagram derived from our cluster approach, the location of the phase boundaries and even its topology radically change, introducing reentrance of the paramagnetic phase as compared to the single-site mean field where correlations are neglected. Furthermore, a stability analysis of the cluster mean field indicates a susceptibility towards a possible incommensurate ordering, not present if short-range correlations are ignored.

  17. Steady-state and transient analysis of a squeeze film damper bearing for rotor stability

    Science.gov (United States)

    Barrett, L. E.; Gunter, E. J.

    1975-01-01

    A study of the steady-state and transient response of the squeeze film damper bearing is presented. Both the steady-state and transient equations for the hydrodynamic bearing forces are derived. The bearing equivalent stiffness and damping coefficients are determined by steady-state equations. These coefficients are used to find the bearing configuration which will provide the optimum support characteristics based on a stability analysis of the rotor-bearing system. The transient analysis of rotor-bearing systems is performed by coupling the bearing and journal equations and integrating forward in time. The effects of unbalance, cavitation, and retainer springs are included in the analysis. Methods of determining the stability of a rotor-bearing system under the influence of aerodynamic forces and internal shaft friction are discussed with emphasis on solving the system characteristic frequency equation and on producing stability maps. It is shown that for optimum stability and low force transmissability the squeeze bearing should operate at an eccentricity ratio epsilon 0.4.

  18. Lower bounds for ballistic current and noise in non-equilibrium quantum steady states

    Directory of Open Access Journals (Sweden)

    Benjamin Doyon

    2015-03-01

    Full Text Available Let an infinite, homogeneous, many-body quantum system be unitarily evolved for a long time from a state where two halves are independently thermalized. One says that a non-equilibrium steady state emerges if there are nonzero steady currents in the central region. In particular, their presence is a signature of ballistic transport. We analyze the consequences of the current observable being a conserved density; near equilibrium this is known to give rise to linear wave propagation and a nonzero Drude peak. Using the Lieb–Robinson bound, we derive, under a certain regularity condition, a lower bound for the non-equilibrium steady-state current determined by equilibrium averages. This shows and quantifies the presence of ballistic transport far from equilibrium. The inequality suggests the definition of “nonlinear sound velocities”, which specialize to the sound velocity near equilibrium in non-integrable models, and “generalized sound velocities”, which encode generalized Gibbs thermalization in integrable models. These are bounded by the Lieb–Robinson velocity. The inequality also gives rise to a bound on the energy current noise in the case of pure energy transport. We show that the inequality is satisfied in many models where exact results are available, and that it is saturated at one-dimensional criticality.

  19. Steady-State and Transient Boundary Element Methods for Coupled Heat Conduction

    Science.gov (United States)

    Kontinos, Dean A.

    1997-01-01

    Boundary element algorithms for the solution of steady-state and transient heat conduction are presented. The algorithms are designed for efficient coupling with computational fluid dynamic discretizations and feature piecewise linear elements with offset nodal points. The steady-state algorithm employs the fundamental solution approach; the integration kernels are computed analytically based on linear shape functions, linear elements, and variably offset nodal points. The analytic expressions for both singular and nonsingular integrands are presented. The transient algorithm employs the transient fundamental solution; the temporal integration is performed analytically and the nonsingular spatial integration is performed numerically using Gaussian quadrature. A series solution to the integration is derived for the instance of a singular integrand. The boundary-only character of the algorithm is maintained by integrating the influence coefficients from initial time. Numerical results are compared to analytical solutions to verify the current boundary element algorithms. The steady-state and transient algorithms are numerically shown to be second-order accurate in space and time, respectively.

  20. Potentialities of steady-state and transient thermography in breast tumour depth detection: A numerical study.

    Science.gov (United States)

    Amri, Amina; Pulko, Susan Helen; Wilkinson, Anthony James

    2016-01-01

    Breast thermography still has inherent limitations that prevent it from being fully accepted as a breast screening modality in medicine. The main challenges of breast thermography are to reduce false positive results and to increase the sensitivity of a thermogram. Further, it is still difficult to obtain information about tumour parameters such as metabolic heat, tumour depth and diameter from a thermogram. However, infrared technology and image processing have advanced significantly and recent clinical studies have shown increased sensitivity of thermography in cancer diagnosis. The aim of this paper is to study numerically the possibilities of extracting information about the tumour depth from steady state thermography and transient thermography after cold stress with no need to use any specific inversion technique. Both methods are based on the numerical solution of Pennes bioheat equation for a simple three-dimensional breast model. The effectiveness of two approaches used for depth detection from steady state thermography is assessed. The effect of breast density on the steady state thermal contrast has also been studied. The use of a cold stress test and the recording of transient contrasts during rewarming were found to be potentially suitable for tumour depth detection during the rewarming process. Sensitivity to parameters such as cold stress temperature and cooling time is investigated using the numerical model and simulation results reveal two prominent depth-related characteristic times which do not strongly depend on the temperature of the cold stress or on the cooling period. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  1. Scalable numerical approach for the steady-state ab initio laser theory

    Science.gov (United States)

    Esterhazy, S.; Liu, D.; Liertzer, M.; Cerjan, A.; Ge, L.; Makris, K. G.; Stone, A. D.; Melenk, J. M.; Johnson, S. G.; Rotter, S.

    2014-08-01

    We present an efficient and flexible method for solving the non-linear lasing equations of the steady-state ab initio laser theory. Our strategy is to solve the underlying system of partial differential equations directly, without the need of setting up a parametrized basis of constant flux states. We validate this approach in one-dimensional as well as in cylindrical systems, and demonstrate its scalability to full-vector three-dimensional calculations in photonic-crystal slabs. Our method paves the way for efficient and accurate simulations of microlasers which were previously inaccessible.

  2. The effect of time-dependent coupling on non-equilibrium steady states

    DEFF Research Database (Denmark)

    Cornean, Horia; Neidhardt, Hagen; Zagrebnov, Valentin

    Consider (for simplicity) two one-dimensional semi-infinite leads coupled to a quantum well via time dependent point interactions. In the remote past the system is decoupled, and each of its components is at thermal equilibrium. In the remote future the system is fully coupled. We define...... and compute the non equilibrium steady state (NESS) generated by this evolution. We show that when restricted to the subspace of absolute continuity of the fully coupled system, the state does not depend at all on the switching. Moreover, we show that the stationary charge current has the same invariant...

  3. The effect of time-dependent coupling on non-equilibrium steady states

    DEFF Research Database (Denmark)

    Cornean, Horia; Neidhardt, Hagen; Zagrebnov, Valentin A.

    2009-01-01

    Consider (for simplicity) two one-dimensional semi-infinite leads coupled to a quantum well via time dependent point interactions. In the remote past the system is decoupled, and each of its components is at thermal equilibrium. In the remote future the system is fully coupled. We define...... and compute the non equilibrium steady state (NESS) generated by this evolution. We show that when restricted to the subspace of absolute continuity of the fully coupled system, the state does not depend at all on the switching. Moreover, we show that the stationary charge current has the same invariant...

  4. Engineering steady-state entanglement via dissipation and quantum Zeno dynamics in an optical cavity.

    Science.gov (United States)

    Li, Dong-Xiao; Shao, Xiao-Qiang; Wu, Jin-Hui; Yi, X X

    2017-10-01

    A new mechanism is proposed for dissipatively preparing maximal Bell entangled state of two atoms in an optical cavity. This scheme integrates the spontaneous emission, the light shift of atoms in the presence of dispersive microwave field, and the quantum Zeno dynamics induced by continuous coupling, to obtain a unique steady state irrespective of initial state. Even for a large cavity decay, a high-fidelity entangled state is achievable at a short convergence time, since the occupation of the cavity mode is inhibited by the Zeno requirement. Therefore, a low single-atom cooperativity C=g2/(κγ) is good enough for realizing a high fidelity of entanglement in a wide range of decoherence parameters. As a straightforward extension, the feasibility for preparation of two-atom Knill-Laflamme-Milburn state with the same mechanism is also discussed.

  5. A mathematical model of liver metabolism: from steady state to dynamic

    Energy Technology Data Exchange (ETDEWEB)

    Calvetti, D; Kuceyeski, A [Case Western Reserve University, Department of Mathematics, 10900 Euclid Avenue, Cleveland, OH 44106 (United States); Somersalo, E [Helsinki University of Technology, Institute of Mathematics, P. O. Box 1100, FIN-02015 HUT (Finland)], E-mail: daniela.calvetti@case.edu, E-mail: amy.kuceyeski@case.edu, E-mail: erkki.somersalo@hut.fi

    2008-07-15

    The increase in Type 2 diabetes and other metabolic disorders has led to an intense focus on the areas of research related to metabolism. Because the liver is essential in regulating metabolite concentrations that maintain life, it is especially important to have good knowledge of the functions within this organ. In silico mathematical models that can adequately describe metabolite concentrations, flux and transport rates in the liver in vivo can be a useful predictive tool. Fully dynamic models, which contain expressions for Michaelis-Menten reaction kinetics can be utilized to investigate different metabolic states, for example exercise, fed or starved state. In this paper we describe a two compartment (blood and tissue) spatially lumped liver metabolism model. First, we use Bayesian Flux Balance Analysis (BFBA) to estimate the values of flux and transport rates at steady state, which agree closely with values from the literature. These values are then used to find a set of Michaelis-Menten parameters and initial concentrations which identify a dynamic model that can be used for exploring different metabolic states. In particular, we investigate the effect of doubling the concentration of lactate entering the system via the hepatic artery and portal vein. This change in lactate concentration forces the system to a new steady state, where glucose production is increased.

  6. Characterizing steady states of genome-scale metabolic networks in continuous cell cultures.

    Directory of Open Access Journals (Sweden)

    Jorge Fernandez-de-Cossio-Diaz

    2017-11-01

    Full Text Available In the continuous mode of cell culture, a constant flow carrying fresh media replaces culture fluid, cells, nutrients and secreted metabolites. Here we present a model for continuous cell culture coupling intra-cellular metabolism to extracellular variables describing the state of the bioreactor, taking into account the growth capacity of the cell and the impact of toxic byproduct accumulation. We provide a method to determine the steady states of this system that is tractable for metabolic networks of arbitrary complexity. We demonstrate our approach in a toy model first, and then in a genome-scale metabolic network of the Chinese hamster ovary cell line, obtaining results that are in qualitative agreement with experimental observations. We derive a number of consequences from the model that are independent of parameter values. The ratio between cell density and dilution rate is an ideal control parameter to fix a steady state with desired metabolic properties. This conclusion is robust even in the presence of multi-stability, which is explained in our model by a negative feedback loop due to toxic byproduct accumulation. A complex landscape of steady states emerges from our simulations, including multiple metabolic switches, which also explain why cell-line and media benchmarks carried out in batch culture cannot be extrapolated to perfusion. On the other hand, we predict invariance laws between continuous cell cultures with different parameters. A practical consequence is that the chemostat is an ideal experimental model for large-scale high-density perfusion cultures, where the complex landscape of metabolic transitions is faithfully reproduced.

  7. Quasi-steady State Reduction of Molecular Motor-Based Models of Directed Intermittent Search

    KAUST Repository

    Newby, Jay M.

    2010-02-19

    We present a quasi-steady state reduction of a linear reaction-hyperbolic master equation describing the directed intermittent search for a hidden target by a motor-driven particle moving on a one-dimensional filament track. The particle is injected at one end of the track and randomly switches between stationary search phases and mobile nonsearch phases that are biased in the anterograde direction. There is a finite possibility that the particle fails to find the target due to an absorbing boundary at the other end of the track. Such a scenario is exemplified by the motor-driven transport of vesicular cargo to synaptic targets located on the axon or dendrites of a neuron. The reduced model is described by a scalar Fokker-Planck (FP) equation, which has an additional inhomogeneous decay term that takes into account absorption by the target. The FP equation is used to compute the probability of finding the hidden target (hitting probability) and the corresponding conditional mean first passage time (MFPT) in terms of the effective drift velocity V, diffusivity D, and target absorption rate λ of the random search. The quasi-steady state reduction determines V, D, and λ in terms of the various biophysical parameters of the underlying motor transport model. We first apply our analysis to a simple 3-state model and show that our quasi-steady state reduction yields results that are in excellent agreement with Monte Carlo simulations of the full system under physiologically reasonable conditions. We then consider a more complex multiple motor model of bidirectional transport, in which opposing motors compete in a "tug-of-war", and use this to explore how ATP concentration might regulate the delivery of cargo to synaptic targets. © 2010 Society for Mathematical Biology.

  8. Augmented Riemann solvers for the shallow water equations over variable topography with steady states and inundation

    Science.gov (United States)

    George, David L.

    2008-03-01

    We present a class of augmented approximate Riemann solvers for the shallow water equations in the presence of a variable bottom surface. These belong to the class of simple approximate solvers that use a set of propagating jump discontinuities, or waves, to approximate the true Riemann solution. Typically, a simple solver for a system of m conservation laws uses m such discontinuities. We present a four wave solver for use with the the shallow water equations—a system of two equations in one dimension. The solver is based on a decomposition of an augmented solution vector—the depth, momentum as well as momentum flux and bottom surface. By decomposing these four variables into four waves the solver is endowed with several desirable properties simultaneously. This solver is well-balanced: it maintains a large class of steady states by the use of a properly defined steady state wave—a stationary jump discontinuity in the Riemann solution that acts as a source term. The form of this wave is introduced and described in detail. The solver also maintains depth non-negativity and extends naturally to Riemann problems with an initial dry state. These are important properties for applications with steady states and inundation, such as tsunami and flood modeling. Implementing the solver with LeVeque's wave propagation algorithm [R.J. LeVeque, Wave propagation algorithms for multi-dimensional hyperbolic systems, J. Comput. Phys. 131 (1997) 327-335] is also described. Several numerical simulations are shown, including a test problem for tsunami modeling.

  9. General Unified Integral Controller with Zero Steady-State Error for Single-Phase Grid-Connected Inverters

    DEFF Research Database (Denmark)

    Guo, Xiaoqiang; Guerrero, Josep M.

    2016-01-01

    the steady-state error suppression with no need of additional complex control algorithms such as the synchronous reference frame transformation. Five alternative implementation methods are comparatively evaluated from the viewpoint of the steady-state and dynamic responses. Further, the theoretical analysis......Current regulation is crucial for operating single-phase grid-connected inverters. The challenge of the current controller is how to fast and precisely tracks the current with zero steady-state error. This paper proposes a novel feedback mechanism for the conventional PI controller. It allows...

  10. STEADY STATE DUST DISTRIBUTIONS IN DISK VORTICES: OBSERVATIONAL PREDICTIONS AND APPLICATIONS TO TRANSITIONAL DISKS

    Energy Technology Data Exchange (ETDEWEB)

    Lyra, Wladimir [Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Drive, Pasadena, CA 91109 (United States); Lin, Min-Kai, E-mail: wlyra@caltech.edu, E-mail: mklin924@cita.utoronto.ca [Canadian Institute for Theoretical Astrophysics, 60 St. George Street, Toronto, Ontario M5S 3H8 (Canada)

    2013-09-20

    The Atacama Large Millimeter Array has returned images of transitional disks in which large asymmetries are seen in the distribution of millimeter sized dust in the outer disk. The explanation in vogue borrows from the vortex literature and suggests that these asymmetries are the result of dust trapping in giant vortices, excited via Rossby wave instabilities at planetary gap edges. Due to the drag force, dust trapped in vortices will accumulate in the center and diffusion is needed to maintain a steady state over the lifetime of the disk. While previous work derived semi-analytical models of the process, in this paper we provide analytical steady-steady solutions. Exact solutions exist for certain vortex models. The solution is determined by the vortex rotation profile, the gas scale height, the vortex aspect ratio, and the ratio of dust diffusion to gas-dust friction. In principle, all of these quantities can be derived from observations, which would validate the model and also provide constrains on the strength of the turbulence inside the vortex core. Based on our solution, we derive quantities such as the gas-dust contrast, the trapped dust mass, and the dust contrast at the same orbital location. We apply our model to the recently imaged Oph IRS 48 system, finding values within the range of the observational uncertainties.

  11. Rubisco activase is a key regulator of non-steady-state photosynthesis at any leaf temperature and, to a lesser extent, of steady-state photosynthesis at high temperature.

    Science.gov (United States)

    Yamori, Wataru; Masumoto, Chisato; Fukayama, Hiroshi; Makino, Amane

    2012-09-01

    The role of Rubisco activase in steady-state and non-steady-state photosynthesis was analyzed in wild-type (Oryza sativa) and transgenic rice that expressed different amounts of Rubisco activase. Below 25°C, the Rubisco activation state and steady-state photosynthesis were only affected when Rubisco activase was reduced by more than 70%. However, at 40°C, smaller reductions in Rubisco activase content were linked to a reduced Rubisco activation state and steady-state photosynthesis. As a result, overexpression of maize Rubisco activase in rice did not lead to an increase of the Rubisco activation state, nor to an increase in photosynthetic rate below 25°C, but had a small stimulatory effect at 40°C. On the other hand, the rate at which photosynthesis approached the steady state following an increase in light intensity was rapid in Rubisco activase-overexpressing plants, intermediate in the wild-type, and slowest in antisense plants at any leaf temperature. In Rubisco activase-overexpressing plants, Rubisco activation state at low light was maintained at higher levels than in the wild-type. Thus, rapid regulation by Rubisco activase following an increase in light intensity and/or maintenance of a high Rubisco activation state at low light would result in a rapid increase in Rubisco activation state and photosynthetic rate following an increase in light intensity. It is concluded that Rubisco activase plays an important role in the regulation of non-steady-state photosynthesis at any leaf temperature and, to a lesser extent, of steady-state photosynthesis at high temperature. © 2012 The Authors. The Plant Journal © 2012 Blackwell Publishing Ltd.

  12. Minimal gain marching schemes: searching for unstable steady-states with unsteady solvers

    Science.gov (United States)

    de S. Teixeira, Renan; S. de B. Alves, Leonardo

    2017-12-01

    Reference solutions are important in several applications. They are used as base states in linear stability analyses as well as initial conditions and reference states for sponge zones in numerical simulations, just to name a few examples. Their accuracy is also paramount in both fields, leading to more reliable analyses and efficient simulations, respectively. Hence, steady-states usually make the best reference solutions. Unfortunately, standard marching schemes utilized for accurate unsteady simulations almost never reach steady-states of unstable flows. Steady governing equations could be solved instead, by employing Newton-type methods often coupled with continuation techniques. However, such iterative approaches do require large computational resources and very good initial guesses to converge. These difficulties motivated the development of a technique known as selective frequency damping (SFD) (Åkervik et al. in Phys Fluids 18(6):068102, 2006). It adds a source term to the unsteady governing equations that filters out the unstable frequencies, allowing a steady-state to be reached. This approach does not require a good initial condition and works well for self-excited flows, where a single nonzero excitation frequency is selected by either absolute or global instability mechanisms. On the other hand, it seems unable to damp stationary disturbances. Furthermore, flows with a broad unstable frequency spectrum might require the use of multiple filters, which delays convergence significantly. Both scenarios appear in convectively, absolutely or globally unstable flows. An alternative approach is proposed in the present paper. It modifies the coefficients of a marching scheme in such a way that makes the absolute value of its linear gain smaller than one within the required unstable frequency spectra, allowing the respective disturbance amplitudes to decay given enough time. These ideas are applied here to implicit multi-step schemes. A few chosen test cases

  13. Steady-State Diffusion of Water through Soft-Contact LensMaterials

    Energy Technology Data Exchange (ETDEWEB)

    Fornasiero, Francesco; Krull, Florian; Radke, Clayton J.; Prausnitz, JohnM.

    2005-01-31

    Water transport through soft contact lenses (SCL) is important for acceptable performance on the human eye. Chemical-potential gradient-driven diffusion rates of water through soft-contact-lens materials are measured with an evaporation-cell technique. Water is evaporated from the bottom surface of a lens membrane by impinging air at controlled flow rate and humidity. The resulting weight loss of a water reservoir covering the top surface of the contact-lens material is recorded as a function of time. New results are reported for a conventional hydrogel material (SofLens{trademark} One Day, hilafilcon A, water content at saturation W{sub 10} = 70 weight %) and a silicone hydrogel material (PureVision{trademark}, balafilcon A, W{sub 10} = 36 %), with and without surface oxygen plasma treatment. Also, previously reported data for a conventional HEMA-SCL (W{sub 10} = 38 %) hydrogel are reexamined and compared with those for SofLens{trademark} One Day and PureVision{trademark} hydrogels. Measured steady-state water fluxes are largest for SofLens{trademark} One Day, followed by PureVision{trademark} and HEMA. In some cases, the measured steady-state water fluxes increase with rising relative air humidity. This increase, due to an apparent mass-transfer resistance at the surface (trapping skinning), is associated with formation of a glassy skin at the air/membrane interface when the relative humidity is below 55-75%. Steady-state water-fluxes are interpreted through an extended Maxwell-Stefan diffusion model for a mixture of species starkly different in size. Thermodynamic nonideality is considered through Flory-Rehner polymer-solution theory. Shrinking/swelling is self-consistently modeled by conservation of the total polymer mass. Fitted Maxwell-Stefan diffusivities increase significantly with water concentration in the contact lens.

  14. Sleep disturbances and health-related quality of life in adults with steady-state bronchiectasis.

    Directory of Open Access Journals (Sweden)

    Yonghua Gao

    Full Text Available Sleep disturbances are common in patients with chronic lung diseases, but little is known about the prevalence in patients with bronchiectasis. A cross sectional study was conducted to investigate the prevalence and determinants associated with sleep disturbances, and the correlation between sleep disturbances and quality of life (QoL in adults with steady-state bronchiectasis.One hundred and forty-four bronchiectasis patients and eighty healthy subjects were enrolled. Sleep disturbances, daytime sleepiness, and QoL were measured by utilizing the Pittsburgh Sleep Quality Index (PSQI, Epworth Sleepiness Scale (ESS and St. George Respiratory Questionnaire (SGRQ, respectively. Demographic, clinical indices, radiology, spirometry, bacteriology, anxiety and depression were also assessed.Adults with steady-state bronchiectasis had a higher prevalence of sleep disturbances (PSQI>5 (57% vs. 29%, P<0.001, but not daytime sleepiness (ESS≥10 (32% vs. 30%, P = 0.76, compared with healthy subjects. In the multivariate model, determinants associated with sleep disturbances in bronchiectasis patients included depression (OR, 10.09; 95% CI, 3.46-29.37; P<0.001, nocturnal cough (OR, 1.89; 95% CI, 1.13-3.18; P = 0.016, aging (OR, 1.04; 95% CI, 1.01-1.07; P = 0.009 and increased 24-hour sputum volume (OR, 2.01; 95% CI, 1.22-3.33; P = 0.006. Patients with sleep disturbances had more significantly impaired QoL affecting all domains than those without. Only 6.2% of patients reported using a sleep medication at least weekly.In adults with steady-state bronchiectasis, sleep disturbances are more common than in healthy subjects and are related to poorer QoL. Determinants associated with sleep disturbances include depression, aging, nighttime cough and increased sputum volume. Assessment and intervention of sleep disturbances are warranted and may improve QoL.

  15. Steady state creep of austenitic steel 16Cr-12Ni-2. 5Mo

    Energy Technology Data Exchange (ETDEWEB)

    Pahutova, M.; Cadek, J.; Cerny, V.

    1983-01-01

    The steady state creep of austenitic steel 16Cr-12Ni-2.5Mo was investigated by the isothermal test technique at a temperature interval of 873 to 1023 K and applied stress interval of 150 to 400 MPa. The activation energy of creep corrected for the temperature dependence of the Young modulus was found higher than the activation enthalpy of the lattice diffusion to which the self-diffusion of all the components of solid solution (Fe, Cr, Ni, Mo) contributes. The stress sensitivity parameter of the steady state creep rate reaches values as high as 12.5; in conformity with the activation energy of creep increasing with applied stress, the stress sensitivity parameter decreases with increasing temperature. The effective stress as measured by the strain transient dip test technique increases both with increasing applied stress and increasing temperature. The changes of structure in the course of creep were investigated by transmission electron microscopy and electron diffraction. It was found that the carbide M/sub 23/C/sub 6/ and the intermetallic phases chi and eta do not contribute to the creep resistivity of the steel under consideration neither directly, i.e., as obstacles to the dislocation glide, nor indirectly, i.e., by influencing the stability of dislocation substructure. Therefore, the idea of interaction creep strengthening has been accepted; this type of strengthening follows from an elastic interaction of Cr and Mo atoms with C atoms and an elastic interaction of Cr-C and Mo-C pairs with dislocations, though the values of the stress sensitivity parameter of steady state creep rate do not support this idea.

  16. Anaerobic digester bioaugmentation influences quasi steady state performance and microbial community.

    Science.gov (United States)

    Venkiteshwaran, K; Milferstedt, K; Hamelin, J; Zitomer, D H

    2016-11-01

    Nine anaerobic digesters, each seeded with biomass from a different source, were operated identically and their quasi steady state function was compared. Subsequently, digesters were bioaugmented with a methanogenic culture previously shown to increase specific methanogenic activity. Before bioaugmentation, different seed biomass resulted in different quasi steady state function, with digesters clustering into three groups distinguished by methane (CH4) production. Digesters with similar functional performance contained similar archaeal communities based on clustering of Illumina sequence data of the V4V5 region of the 16S rRNA gene. High CH4 production correlated with neutral pH and high Methanosarcina abundance, whereas low CH4 production correlated to low pH as well as high Methanobacterium and DHVEG 6 family abundance. After bioaugmentation, CH4 production from the high CH4 producing digesters transiently increased by 11 ± 3% relative to non-bioaugmented controls (p bioaugmentation was correlated to increased relative abundance of Methanosaeta and Methaospirillum originating from the bioaugment culture. In conclusion, different anaerobic digester seed biomass can result in different quasi steady state CH4 production, SCOD removal, pH and effluent VFA concentration in the timeframe studied. The bioaugmentation employed can result in a period of increased methane production. Future research should address extending the period of increased CH4 production by employing pH and VFA control concomitant with bioaugmentation, developing improved bioaugments, or employing a membrane bioreactor to retain the bioaugment. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Blood flow patterns during incremental and steady-state aerobic exercise.

    Science.gov (United States)

    Coovert, Daniel; Evans, LeVisa D; Jarrett, Steven; Lima, Carla; Lima, Natalia; Gurovich, Alvaro N

    2017-05-30

    Endothelial shear stress (ESS) is a physiological stimulus for vascular homeostasis, highly dependent on blood flow patterns. Exercise-induced ESS might be beneficial on vascular health. However, it is unclear what type of ESS aerobic exercise (AX) produces. The aims of this study are to characterize exercise-induced blood flow patterns during incremental and steady-state AX. We expect blood flow pattern during exercise will be intensity-dependent and bidirectional. Six college-aged students (2 males and 4 females) were recruited to perform 2 exercise tests on cycleergometer. First, an 8-12-min incremental test (Test 1) where oxygen uptake (VO2), heart rate (HR), blood pressure (BP), and blood lactate (La) were measured at rest and after each 2-min step. Then, at least 48-hr. after the first test, a 3-step steady state exercise test (Test 2) was performed measuring VO2, HR, BP, and La. The three steps were performed at the following exercise intensities according to La: 0-2 mmol/L, 2-4 mmol/L, and 4-6 mmol/L. During both tests, blood flow patterns were determined by high-definition ultrasound and Doppler on the brachial artery. These measurements allowed to determine blood flow velocities and directions during exercise. On Test 1 VO2, HR, BP, La, and antegrade blood flow velocity significantly increased in an intensity-dependent manner (repeated measures ANOVA, pexercise induced ESS might be increased in an intensity-dependent way and blood flow patterns during incremental and steady-state exercises include both antegrade and retrograde blood flows.

  18. Seeing the talker’s face supports executive processing of speech in steady state noise

    Science.gov (United States)

    Mishra, Sushmit; Lunner, Thomas; Stenfelt, Stefan; Rönnberg, Jerker; Rudner, Mary

    2013-01-01

    Listening to speech in noise depletes cognitive resources, affecting speech processing. The present study investigated how remaining resources or cognitive spare capacity (CSC) can be deployed by young adults with normal hearing. We administered a test of CSC (CSCT; Mishra et al., 2013) along with a battery of established cognitive tests to 20 participants with normal hearing. In the CSCT, lists of two-digit numbers were presented with and without visual cues in quiet, as well as in steady-state and speech-like noise at a high intelligibility level. In low load conditions, two numbers were recalled according to instructions inducing executive processing (updating, inhibition) and in high load conditions the participants were additionally instructed to recall one extra number, which was the always the first item in the list. In line with previous findings, results showed that CSC was sensitive to memory load and executive function but generally not related to working memory capacity (WMC). Furthermore, CSCT scores in quiet were lowered by visual cues, probably due to distraction. In steady-state noise, the presence of visual cues improved CSCT scores, probably by enabling better encoding. Contrary to our expectation, CSCT performance was disrupted more in steady-state than speech-like noise, although only without visual cues, possibly because selective attention could be used to ignore the speech-like background and provide an enriched representation of target items in working memory similar to that obtained in quiet. This interpretation is supported by a consistent association between CSCT scores and updating skills. PMID:24324411

  19. Seeing the talker’s face supports executive processing of speech in steady state noise

    Directory of Open Access Journals (Sweden)

    Sushmit eMishra

    2013-11-01

    Full Text Available Listening to speech in noise depletes cognitive resources, affecting speech processing. The present study investigated how remaining resources or cognitive spare capacity (CSC can be deployed by young adults with normal hearing. We administered a test of CSC (CSCT, Mishra et al., 2013 along with a battery of established cognitive tests to 20 participants with normal hearing. In the CSCT, lists of two-digit numbers were presented with and without visual cues in quiet, as well as in steady-state and speech-like noise at a high intelligibility level. In low load conditions, two numbers were recalled according to instructions inducing executive processing (updating, inhibition and in high load conditions the participants were additionally instructed to recall one extra number, which was the always the first item in the list. In line with previous findings, results showed that CSC was sensitive to memory load and executive function but generally not related to working memory capacity. Furthermore, CSCT scores in quiet were lowered by visual cues, probably due to distraction. In steady-state noise, the presence of visual cues improved CSCT scores, probably by enabling better encoding. Contrary to our expectation, CSCT performance was disrupted more in steady-state than speech-like noise, although only without visual cues, possibly because selective attention could be used to ignore the speech-like background and provide an enriched representation of target items in working memory similar to that obtained in quiet. This interpretation is supported by a consistent association between CSCT scores and updating skills.

  20. The total quasi-steady-state approximation for fully competitive enzyme reactions

    DEFF Research Database (Denmark)

    Pedersen, Morten Gram; Bersani, A.M.; Bersani, E.

    2007-01-01

    The validity of the Michaelis-Menten-Briggs-Haldane approximation for single enzyme reactions has recently been improved by the formalism of the total quasi-steady-state approximation. This approach is here extended to fully competitive systems, and a criterion for its validity is provided. We show...... that it extends the Michaelis-Menten-Briggs-Haldane approximation for such systems for a wide range of parameters very convincingly, and investigate special cases. It is demonstrated that our method is at least roughly valid in the case of identical affinities. The results presented should be useful for numerical...

  1. LHe Flow Regime/Pressure Drop for D0 Solenoid at Steady State Conditions

    Energy Technology Data Exchange (ETDEWEB)

    Rucinski, R.; /Fermilab

    1993-03-03

    This paper describes in a note taking format what was learned from several sources on two phase liquid helium flow regimes and pressure drops as applied to the D-Zero solenoid upgrade project. Calculations to estimate the steady state conditions for the D-Zero solenoid at 5, 10 and 15 g/s are also presented. For the lower flow rates a stratified type regime can be expected with a pressure drop less than 0.5 psi. For the higher flow rate a more homogeneous flow regime can be expected with a pressure drop between 0.4 to 1.5 psi.

  2. Linear combination of auditory steady-state responses evoked by co-modulated tones

    DEFF Research Database (Denmark)

    Guérit, François; Marozeau, Jeremy; Epp, Bastian

    2017-01-01

    Up to medium intensities and in the 80–100-Hz region, the auditory steady-state response (ASSR) to a multi-tone carrier is commonly considered to be a linear sum of the dipoles from each tone specific ASSR generator. Here, this hypothesis was investigated when a unique modulation frequency is used...... for all carrier components. Listeners were presented with a co-modulated dual-frequency carrier (1 and 4 kHz), from which the modulator starting phase Ui of the 1-kHz component was systematically varied. The results support the hypothesis of a linear superposition of the dipoles originating from different...

  3. A steady-state kinetic analysis of the prolyl-4-hydroxylase mechanism.

    Science.gov (United States)

    Soskel, N T; Kuby, S A

    1981-01-01

    Published kinetic data by Kivirikko, et al. on the prolyl-4-hydroxylase reaction have been re-evaluated using the overall steady-state velocity equation in the forward and reverse directions for an ordered ter ter kinetic mechanism. Qualitatively, the published data for prolyl-4-hydroxylase appear to fit the predicted patterns for this kinetic mechanism. More kinetic data are needed to confirm these results and to quantitate the kinetic parameters but, tentatively, the order of substrate addition would appear to be alpha-ketoglutarate, oxygen, and peptide; and the order of product release would be hydroxylated peptide (or collagen), carbon dioxide, and succinate.

  4. Pre-steady-state Kinetics for Hydrolysis of Insoluble Cellulose by Cellobiohydrolase Cel7A

    DEFF Research Database (Denmark)

    Cruys-Bagger, Nicolaj; Olsen, Jens Elmerdahl; Præstgaard, Eigil

    2012-01-01

    complex, processive hydrolysis, and dissociation, respectively. These kinetic parameters elucidate limiting factors in the cellulolytic process. We concluded, for example, that Cel7A cleaves about four glycosidic bonds/s during processive hydrolysis. However, the results suggest that stalling...... for the exo-acting cellulase Cel7A using amperometric biosensors and an explicit model for processive hydrolysis of cellulose. This analysis allows the identification of a pseudo-steady-state period and quantification of a processivity number as well as rate constants for the formation of a threaded enzyme...

  5. Multiple Steady-States in a Heat Integrated Distillation Column (HIDiC)

    OpenAIRE

    Kano, Manabu; Fukushima, Tomohiro; Makita, Hiroshi; Hasebe, Shinji

    2007-01-01

    A heat integrated distillation column (HIDiC) is a new and highly energy-efficient distillation process. In the present work, multiple steady-states in HIDiC are analyzed. In HIDiC, the pressure in the rectifying section is kept higher than that in the stripping section by using a compressor to enhance heat transfer from the rectifying section to the stripping section through the wall. Therefore, an energy balance, particularly the influence of the compressor, must be taken into account for t...

  6. Prethermal Floquet Steady States and Instabilities in the Periodically Driven, Weakly Interacting Bose-Hubbard Model.

    Science.gov (United States)

    Bukov, Marin; Gopalakrishnan, Sarang; Knap, Michael; Demler, Eugene

    2015-11-13

    We explore prethermal Floquet steady states and instabilities of the weakly interacting two-dimensional Bose-Hubbard model subject to periodic driving. We develop a description of the nonequilibrium dynamics, at arbitrary drive strength and frequency, using a weak-coupling conserving approximation. We establish the regimes in which conventional (zero-momentum) and unconventional [(π,π)-momentum] condensates are stable on intermediate time scales. We find that condensate stability is enhanced by increasing the drive strength, because this decreases the bandwidth of quasiparticle excitations and thus impedes resonant absorption and heating. Our results are directly relevant to a number of current experiments with ultracold bosons.

  7. On a quantum phase transition in a steady state out of equilibrium

    Science.gov (United States)

    Aschbacher, Walter H.

    2016-10-01

    Within the rigorous axiomatic framework for the description of quantum mechanical systems with a large number of degrees of freedom, we show that the nonequilibrium steady state, constructed in the quasifree fermionic system corresponding to the isotropic XY chain in which a finite sample, coupled to two thermal reservoirs at different temperatures, is exposed to a local external magnetic field, is breaking translation invariance and exhibits a strictly positive entropy production rate. Moreover, we prove that there exists a second-order nonequilibrium quantum phase transition with respect to the strength of the magnetic field as soon as the system is truly out of equilibrium.

  8. Quantum criticality out of equilibrium: steady state in a magnetic single-electron transistor.

    Science.gov (United States)

    Kirchner, Stefan; Si, Qimiao

    2009-11-13

    Quantum critical systems out of equilibrium are of extensive interest, but are difficult to study theoretically. We consider here the steady-state limit of a single-electron transistor with ferromagnetic leads. In equilibrium (i.e., bias voltage V = 0), this system features a continuous quantum phase transition with a critical destruction of the Kondo effect. We construct an exact quantum Boltzmann treatment in a dynamical large-N limit, and determine the universal scaling functions of both the nonlinear conductance and fluctuation-dissipation ratios. We also elucidate the decoherence properties as encoded in the local spin response.

  9. Quantum phase transition in a far-from-equilibrium steady state of an XY spin chain.

    Science.gov (United States)

    Prosen, Tomaz; Pizorn, Iztok

    2008-09-05

    Using quantization in the Fock space of operators, we compute the nonequilibrium steady state in an open Heisenberg XY spin 1/2 chain of a finite but large size coupled to Markovian baths at its ends. Numerical and theoretical evidence is given for a far-from-equilibrium quantum phase transition with the spontaneous emergence of long-range order in spin-spin correlation functions, characterized by a transition from saturation to linear growth with the size of the entanglement entropy in operator space.

  10. Collective effects in nanolasers: Steady-state characteristics and photon statistics

    DEFF Research Database (Denmark)

    André, Emil Cortes; Protsenko, I. E.; Mørk, Jesper

    2017-01-01

    In the traditional rate equation-approach to nanolasers, the active material is modelled as a collection of independent emitters [1], but in recent years it has become increasingly clear that radiative coupling of the emitters in the cavity can significantly change the characteristics of a (nano......)laser under certain conditions [2-5]. The collective effects arising as an emitter-emitter coupling are known to cause a reduction in the steady-state intensity for small values of the pump rate [2, 3], which means the effective jump at threshold becomes larger. As a result, the fraction β of spontaneous...

  11. Parallel shooting methods for finding steady state solutions to engine simulation models

    DEFF Research Database (Denmark)

    Andersen, Stig Kildegård; Thomsen, Per Grove; Carlsen, Henrik

    2007-01-01

    Parallel single- and multiple shooting methods were tested for finding periodic steady state solutions to a Stirling engine model. The model was used to illustrate features of the methods and possibilities for optimisations. Performance was measured using simulation of an experimental data set...... as test case. A parallel speedup factor of 23 on 33 processors was achieved with multiple shooting. But fast transients at the beginnings of sub intervals caused significant overhead for the multiple shooting methods and limited the best speedup to 3.8 relative to the fastest sequential method: Single...... shooting with reduced dimension of the boundary value problem....

  12. Steady-state numerical modeling of size effects in micron scale wire drawing

    DEFF Research Database (Denmark)

    Juul, Kristian Jørgensen; Nielsen, Kim Lau; Niordson, Christian Frithiof

    2017-01-01

    these effects for the wire drawing process. Focus will be on investigating the impact of size effects on the most favourable tool geometry (in terms of minimizing the drawing force) for various conditions between the wire/tool interface. The numerical analysis is based on a steady-state framework that enables....... This creates a need for a higher order plasticity theory to accurately predict the material behaviour across the multiple scales involved. The present study reveals that the contribution from an energetic (recoverable) length parameter is limited, while the corresponding dissipative contribution dominates...

  13. Steady-state Lévy flights in a confined domain

    Science.gov (United States)

    Denisov, S. I.; Horsthemke, Werner; Hänggi, Peter

    2008-06-01

    We derive the generalized Fokker-Planck equation associated with a Langevin equation driven by arbitrary additive white noise. We apply our result to study the distribution of symmetric and asymmetric Lévy flights in an infinitely deep potential well. The fractional Fokker-Planck equation for Lévy flights is derived and solved analytically in the steady state. It is shown that Lévy flights are distributed according to the beta distribution, whose probability density becomes singular at the boundaries of the well. The origin of the preferred concentration of flying objects near the boundaries in nonequilibrium systems is clarified.

  14. Investigation of component failure rates for pulsed versus steady state tokamak operation

    Energy Technology Data Exchange (ETDEWEB)

    Cadwallader, L.C.

    1992-07-01

    This report presents component failure rate data sources applicable to magnetic fusion systems, and defines multiplicative factors to adjust these data for specific use on magnetic fusion experiment designs. The multipliers address both long pulse and steady state tokamak operation. Thermal fatigue and radiation damage are among the leading reasons for large multiplier values in pulsed operation applications. Field failure rate values for graphite protective tiles are presented, and beryllium tile failure rates in laboratory testing are also given. All of these data can be used for reliability studies, safety analyses, design tradeoff studies, and risk assessments.

  15. Steady-State Crack Growth in Rate-Sensitive Single Crystals

    DEFF Research Database (Denmark)

    Juul, Kristian Jørgensen; Nielsen, Kim Lau; Niordson, Christian Frithiof

    2016-01-01

    The characteristics of the active plastic zone surrounding a crack growingin a single crystal (FCC, BCC, and HCP) at constant velocity is investigated for ModeI loading under plane strain assumptions. The framework builds upon a steady-state relation bringing the desired solution out in a frame...... the literature. The plastic zone is found to be smallest for the FCC structure andlargest for the HCP structure, which is also reected in the shielding ratio, where FCC crystals show the smallest shielding and HCP the largest shielding....

  16. Output Regulation of Large-Scale Hydraulic Networks with Minimal Steady State Power Consumption

    DEFF Research Database (Denmark)

    Jensen, Tom Nørgaard; Wisniewski, Rafal; De Persis, Claudio

    2014-01-01

    An industrial case study involving a large-scale hydraulic network is examined. The hydraulic network underlies a district heating system, with an arbitrary number of end-users. The problem of output regulation is addressed along with a optimization criterion for the control. The fact...... that the system is overactuated is exploited for minimizing the steady state electrical power consumption of the pumps in the system, while output regulation is maintained. The proposed control actions are decentralized in order to make changes in the structure of the hydraulic network easy to implement....

  17. Steady State Analysis of a UPFC as Voltage Regulator for Optimal Position in the Transmission Line

    Directory of Open Access Journals (Sweden)

    S. Ali Al-Mawsawi

    2003-06-01

    Full Text Available It has recently been illustrated that the Unified Power Flow Controller (UPFC installation location plays an important role in effecting nonlinearly in the UPFC steady state performance of the system. A Pulse Width Modulation (PWM based on UPFC as a voltage regulator is modeled and analyzed to investigate the optimal position in the transmission line. From the study made in this paper, it is shown that the location of UPFC plays a significant part in effecting nonlinearly. It is also found from the simulation results that the distribution of the active and reactive power flows can be controlled by varying the modulation index of the device.

  18. Asymptotics of steady states of a selection–mutation equation for small mutation rate

    KAUST Repository

    Calsina, Àngel

    2013-12-01

    We consider a selection-mutation equation for the density of individuals with respect to a continuous phenotypic evolutionary trait. We assume that the competition term for an individual with a given trait depends on the traits of all the other individuals, therefore giving an infinite-dimensional nonlinearity. Mutations are modelled by means of an integral operator. We prove existence of steady states and show that, when the mutation rate goes to zero, the asymptotic profile of the population is a Cauchy distribution. © Royal Society of Edinburgh 2013.

  19. A Logic for Checking the Probabilistic Steady-State Properties of Reaction Networks.

    Science.gov (United States)

    Picard, Vincent; Siegel, Anne; Bourdon, Jérémie

    2017-08-01

    Designing probabilistic reaction models and determining their stochastic kinetic parameters are major issues in systems biology. To assist in the construction of reaction network models, we introduce a logic that allows one to express asymptotic properties about the steady-state stochastic dynamics of a reaction network. Basically, the formulas can express properties on expectancies, variances, and covariances. If a formula encoding for experimental observations on the system is not satisfiable, then the reaction network model can be rejected. We demonstrate that deciding the satisfiability of a formula is NP-hard, but we provide a decision method based on solving systems of polynomial constraints. We illustrate our method on a toy example.

  20. Tetrahexahedral Pt Nanoparticles: Comparing the Oxygen Reduction Reaction under Transient vs Steady-State Conditions

    DEFF Research Database (Denmark)

    Deng, Yu-Jia; Wiberg, Gustav Karl Henrik; Zana, Alessandro

    2017-01-01

    In this work, we have synthesized tetrahexahedral (THH) Pt nanoparticles (NPs) enclosed with {730} high-index facets using a one-step square wave potential procedure. The catalytic activity of the THH NPs toward the oxygen reduction reaction (ORR) is studied under both transient and steady......-state conditions. As a benchmark, the ORR activity is compared with those of polycrystalline Pt and a commercial Pt/C catalyst. The results show that, under transient conditions, the catalytic performance of the THH Pt NPs and Pt/C are approximately the same and about 2 times lower than that of polycrystalline Pt...

  1. Mean steady-state plasma concentrations of labetalol in patients undergoing antihypertensive therapy.

    Science.gov (United States)

    Sanders, G L; Routledge, P A; Ward, A; Davies, D M; Rawlins, M D

    1979-01-01

    1 Mean steady-state plasma concentrations of labetalol (labetalol Css) in 17 hypertensive patients undergoing chronic treatment with this drug, have been examined in relation to dose, fall in BP, and beta-blockade. 2 A significant relationship (rs = 0.81, P less than 0.001) was observed between labetalol Css and daily dose. 3 No correlation was found between labetalol Css and antihypertensive response. 4 In thirteen patients, there seemed to be significant relationship between labetalol Css and beta-blockade (rs = 0.72, P less than 0.005). In three patients, the degree of beta-blockade was disproportionate to the drug concentration. PMID:526396

  2. New analytical solution for solving steady-state heat conduction problems with singularities

    Directory of Open Access Journals (Sweden)

    Laraqi Najib

    2013-01-01

    Full Text Available A problem of steady-state heat conduction which presents singularities is solved in this paper by using the conformal mapping method. The principle of this method is based on the Schwarz-Christoffel transformation. The considered problem is a semi-infinite medium with two different isothermal surfaces separated by an adiabatic annular disc. We show that the thermal resistance can be determined without solving the governing equations. We determine a simple and exact expression that provides the thermal resistance as a function of the ratio of annular disc radii.

  3. Steady-state low thermal resistance characterization apparatus: The bulk thermal tester

    Science.gov (United States)

    Burg, Brian R.; Kolly, Manuel; Blasakis, Nicolas; Gschwend, Dominic; Zürcher, Jonas; Brunschwiler, Thomas

    2015-12-01

    The reliability of microelectronic devices is largely dependent on electronic packaging, which includes heat removal. The appropriate packaging design therefore necessitates precise knowledge of the relevant material properties, including thermal resistance and thermal conductivity. Thin materials and high conductivity layers make their thermal characterization challenging. A steady state measurement technique is presented and evaluated with the purpose to characterize samples with a thermal resistance below 100 mm2 K/W. It is based on the heat flow meter bar approach made up by two copper blocks and relies exclusively on temperature measurements from thermocouples. The importance of thermocouple calibration is emphasized in order to obtain accurate temperature readings. An in depth error analysis, based on Gaussian error propagation, is carried out. An error sensitivity analysis highlights the importance of the precise knowledge of the thermal interface materials required for the measurements. Reference measurements on Mo samples reveal a measurement uncertainty in the range of 5% and most accurate measurements are obtained at high heat fluxes. Measurement techniques for homogeneous bulk samples, layered materials, and protruding cavity samples are discussed. Ultimately, a comprehensive overview of a steady state thermal characterization technique is provided, evaluating the accuracy of sample measurements with thermal resistances well below state of the art setups. Accurate characterization of materials used in heat removal applications, such as electronic packaging, will enable more efficient designs and ultimately contribute to energy savings.

  4. Uterine metabolism of the pregnant rabbit under chronic steady-state conditions

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, R.L.; Gilbert, M.; Block, S.M.; Battaglia, F.C.

    1986-05-01

    The study of uterine metabolism in pregnancy under chronic steady-state conditions has been confined to large mammals and, more recently, to the guinea pig. The pregnant rabbit is of interest because of its short gestation and large litter size. We developed an indirect approach involving retrograde catheterization of the uterine venous drainage, permitting measurement of both uterine metabolic quotients and uterine uptakes. Radioactive microspheres were used to measure blood flow. A large lactate and ammonia efflux from the uterus was found. In the fed state, ketogenic substrates were taken up in small amounts. However, during starvation a significant increase in ketoacid uptake was observed with a concurrent fall in acetate uptake. There was a large glucose/oxygen quotient across the uterus, but the glucose plus lactate/oxygen quotient was comparable to that found in the sheep and guinea pig (0.6 +/- 0.1). It is apparent that in all three species studied under chronic steady-state conditions (sheep, guinea pig, and rabbit) there is a large glucose uptake associated with a net lactate production, and fuels other than glucose and lactate must be used by the uterus.

  5. Chaotic and steady state behaviour of a nonlinear controlled gyro subjected to harmonic disturbances

    Energy Technology Data Exchange (ETDEWEB)

    Perez Polo, Manuel F. [Department of Fisica, Ingenieria de Sistemas y Teoria de la Senal, Universidad de Alicante, Escuela Politecnica Superior, Campus de San Vicente, 03071 Alicante (Spain)]. E-mail: manolo@dfists.ua.es; Perez Molina, Manuel [Facultad de Ciencias Matematicas, Universidad Nacional de Educacion a Distancia, UNED, C/Boyero 12-1A, Alicante 03007 (Spain)]. E-mail: ma_perez_m@hotmail.com

    2007-07-15

    Chaotic and steady state motions of a nonlinear controlled gimbals suspension gyro used to stabilize an external body are studied in this paper. The equations of the gyro without nonlinear control are deduced from the Euler-Lagrange equations by using the nutation theory. The equations of the system show that a cyclic variable appears. Its elimination allows us to find an auxiliary nonlinear system from which it is possible to deduce a nonlinear control law in order to obtain a desired equilibrium point. From the analysis of the nonlinear control law it is possible to show that due to both harmonic disturbances in the platform of the gyro and in the body to stabilize, regular and chaotic motions can appear. The chaotic motion is researched by means of chaos maps, bifurcation diagrams, sensitivity to initial conditions, Lyapunov exponents and Fourier spectrum density. The transition from chaotic to steady state motion by eliminating the harmonic disturbances from the modification of the initial nonlinear control law is also researched. Next, the paper shows how to use the chaotic motion in order to obtain small input signals so that the desired equilibrium state of the gyro can be reached. The developed methodology and its compared performance are evaluated through analytical methods and numerical simulations.

  6. Energy management in multi stage evaporator through a steady and dynamic state analysis

    Energy Technology Data Exchange (ETDEWEB)

    Verma, Om Prakash; Manik, Gaurav; Mohammed, Toufiq Haji [Indian Institute of Technology Roorkee, Roorkee (India)

    2017-10-15

    Increasing energy demand, high cost of energy and global warming issues across the globe require energy intensive industries, such as paper mills to improve energy efficiency. Multi-stage evaporators used to concentrate the black liquor in such mills form its most energy consuming unit and require a strong understanding of steady and unsteady state behavior to ensure energy savings. The modeling of nonlinear heptads’ effect system yielded a set of complex nonlinear algebraic and differential equations that are analyzed using Interior-point method and state space representation. Dynamic response of product concentration and system vapor temperatures along with system stability and controllability have been explored by disturbing the flow rate, concentration and temperature of feed, and fresh steam flow rate. Simulations predict that steam flow rate, feed flow rate and its concentration invariably are major controlling factors (in decreasing order) of vapor temperature and product concentration. The interactive behavior between different effects translates into slower responses of the effects with increasing separation from disturbance source. This steady state and transient study opens many new explanations to this relatively less explored area and helps to propose and implement industrial PID controllers to reduce steam consumption and control product quality.

  7. Steady state in a gas of inelastic rough spheres heated by a uniform stochastic force

    Energy Technology Data Exchange (ETDEWEB)

    Vega Reyes, Francisco, E-mail: fvega@unex.es; Santos, Andrés, E-mail: andres@unex.es [Departamento de Física and Instituto de Computación Científica Avanzada (ICCAEx), Universidad de Extremadura, 06071 Badajoz (Spain)

    2015-11-15

    We study here the steady state attained in a granular gas of inelastic rough spheres that is subject to a spatially uniform random volume force. The stochastic force has the form of the so-called white noise and acts by adding impulse to the particle translational velocities. We work out an analytical solution of the corresponding velocity distribution function from a Sonine polynomial expansion that displays energy non-equipartition between the translational and rotational modes, translational and rotational kurtoses, and translational-rotational velocity correlations. By comparison with a numerical solution of the Boltzmann kinetic equation (by means of the direct simulation Monte Carlo method), we show that our analytical solution provides a good description that is quantitatively very accurate in certain ranges of inelasticity and roughness. We also find three important features that make the forced granular gas steady state very different from the homogeneous cooling state (attained by an unforced granular gas). First, the marginal velocity distributions are always close to a Maxwellian. Second, there is a continuous transition to the purely smooth limit (where the effects of particle rotations are ignored). And third, the angular translational-rotational velocity correlations show a preference for a quasiperpendicular mutual orientation (which is called “lifted-tennis-ball” behavior)

  8. Transient and steady-state properties of asymmetric semiconductor quantum wells at telecom wavelength bands

    Science.gov (United States)

    Hamedi, H. R.

    2014-09-01

    The transient and steady-state dispersion and absorption properties of a three-subband asymmetric semiconductor quantum well system are investigated. In the steady-state regime, it is shown that by increasing the strength of Fano-interference as well as enhancement of energy splitting of two excited states the slope of dispersion changes from negative to positive which is corresponding to a switch between superluminal to subluminal light propagation. At the same time, the probe absorption reduces at telecommunication wavelength λ = 1550 nm. The influence of incoherent pumping fields on time-dependent susceptibility is then discussed. It is found that due to more transfer of population to the upper levels, increasing the rate of incoherent pump field leads to the reduction of probe absorption. In addition, it is realized that incoherent pumping has a major role in converting fast to slow propagation of light at long wavelength. We also introduce an extra controllability for the light pulse to be slow downed at Telecom wavelength just through the quantum interference arising from incoherent pumping fields. The obtained results may be practical in telecommunication applications.

  9. Steady-state low thermal resistance characterization apparatus: The bulk thermal tester

    Energy Technology Data Exchange (ETDEWEB)

    Burg, Brian R.; Kolly, Manuel; Blasakis, Nicolas; Gschwend, Dominic; Zürcher, Jonas; Brunschwiler, Thomas, E-mail: tbr@zurich.ibm.com [IBM Research—Zurich, 8803 Rüschlikon (Switzerland)

    2015-12-15

    The reliability of microelectronic devices is largely dependent on electronic packaging, which includes heat removal. The appropriate packaging design therefore necessitates precise knowledge of the relevant material properties, including thermal resistance and thermal conductivity. Thin materials and high conductivity layers make their thermal characterization challenging. A steady state measurement technique is presented and evaluated with the purpose to characterize samples with a thermal resistance below 100 mm{sup 2} K/W. It is based on the heat flow meter bar approach made up by two copper blocks and relies exclusively on temperature measurements from thermocouples. The importance of thermocouple calibration is emphasized in order to obtain accurate temperature readings. An in depth error analysis, based on Gaussian error propagation, is carried out. An error sensitivity analysis highlights the importance of the precise knowledge of the thermal interface materials required for the measurements. Reference measurements on Mo samples reveal a measurement uncertainty in the range of 5% and most accurate measurements are obtained at high heat fluxes. Measurement techniques for homogeneous bulk samples, layered materials, and protruding cavity samples are discussed. Ultimately, a comprehensive overview of a steady state thermal characterization technique is provided, evaluating the accuracy of sample measurements with thermal resistances well below state of the art setups. Accurate characterization of materials used in heat removal applications, such as electronic packaging, will enable more efficient designs and ultimately contribute to energy savings.

  10. Steady-state low thermal resistance characterization apparatus: The bulk thermal tester.

    Science.gov (United States)

    Burg, Brian R; Kolly, Manuel; Blasakis, Nicolas; Gschwend, Dominic; Zürcher, Jonas; Brunschwiler, Thomas

    2015-12-01

    The reliability of microelectronic devices is largely dependent on electronic packaging, which includes heat removal. The appropriate packaging design therefore necessitates precise knowledge of the relevant material properties, including thermal resistance and thermal conductivity. Thin materials and high conductivity layers make their thermal characterization challenging. A steady state measurement technique is presented and evaluated with the purpose to characterize samples with a thermal resistance below 100 mm(2) K/W. It is based on the heat flow meter bar approach made up by two copper blocks and relies exclusively on temperature measurements from thermocouples. The importance of thermocouple calibration is emphasized in order to obtain accurate temperature readings. An in depth error analysis, based on Gaussian error propagation, is carried out. An error sensitivity analysis highlights the importance of the precise knowledge of the thermal interface materials required for the measurements. Reference measurements on Mo samples reveal a measurement uncertainty in the range of 5% and most accurate measurements are obtained at high heat fluxes. Measurement techniques for homogeneous bulk samples, layered materials, and protruding cavity samples are discussed. Ultimately, a comprehensive overview of a steady state thermal characterization technique is provided, evaluating the accuracy of sample measurements with thermal resistances well below state of the art setups. Accurate characterization of materials used in heat removal applications, such as electronic packaging, will enable more efficient designs and ultimately contribute to energy savings.

  11. Dressed states analysis of lasing without inversion in a three-level ladder system: the steady-state regime

    Energy Technology Data Exchange (ETDEWEB)

    Braunstein, D [Department of Physics, Sammi Shamoon College of Engineering, P O Box 45, Beer Sheva 84100 (Israel); Shuker, R [Department of Physics, Ben Gurion University of the Negev, P O Box 653, Beer Sheva 84105 (Israel)], E-mail: doronb@sce.ac.il, E-mail: shuker@bgu.ac.il

    2009-06-28

    A dressed-state study of lasing without population inversion from a three-level atom interacting with a bi-chromatic laser field in the ladder configuration is presented. In our model we allow the atom to be dressed by both of the coupling and probe fields. The system under consideration is explored both analytically and numerically within the steady-state regime. A parameter study is performed in which we explore the influence of the change of control parameters (Rabi frequencies and incoherent pump rates, etc) on the system behaviour. The parameter study also applies to situations where both coherent fields have comparable intensities. Expressions for steady-state populations and coherences are derived, from which the constraints on the system control parameters allowing gain or absorption of various types, are calculated. The system is demonstrated to possess gain without inversion (GWI), as well as regular gain with inversion, for the appropriate choice of system control parameters. Inversion without lasing (IWL) is also found. The dressed-state approach offers a different insight into the system dynamics in which Rabi oscillations and spectral features appear natural. We believe that the dressed-state approach provides a more adequate description of the system dynamics than that provided by the bare state basis.

  12. Current status and prospect of plasma control system for steady-state operation on QUEST

    Energy Technology Data Exchange (ETDEWEB)

    Hasegawa, Makoto, E-mail: hasegawa@triam.kyushu-u.ac.jp; Nakamura, Kazuo; Zushi, Hideki; Hanada, Kazuaki; Fujisawa, Akihide; Tokunaga, Kazutoshi; Idei, Hiroshi; Nagashima, Yoshihiko; Kawasaki, Shoji; Nakashima, Hisatoshi; Higashijima, Aki

    2016-11-15

    Highlights: • Overall configuration of plasma control system on QUEST are presented. • Multi core system and reflective memories are used for the real-time control. • Hall sensors are used for the identification of plasma current and its position. • Repetitive gas fueling with the feed-back control of Hα signal is implemented. - Abstract: The plasma control system (PCS) of QUEST is developed according to the progress of QUEST project. Since one of the critical goals of the project is to achieve the steady-state operation with high temperature vacuum vessel wall, the PCS is also required to have the capability to control the plasma for a long period. For the increase of the loads to processing power of the PCS, the PCS is decentralized with the use of reflective memories (RFMs). The PCS controls the plasma edge position with the real-time identification of plasma current and its position. This identification is done with not only flux loops but also hall sensors. The gas fueling method by piezo valve with monitoring the Hα signal filtered by a digital low-pass filter are proposed and suitable for the steady-state operation on QUEST. The present status and prospect of the PCS are presented with recent topics.

  13. Modified Matrix Method for Calculating Steady-State Span Loading on Flexible Wings in Subsonic Flight

    Science.gov (United States)

    Gainer, Patrick A.; Aiken, William S., Jr.

    1959-01-01

    A method is presented for shortening the computations required to determine the steady-state span loading on flexible wings in subsonic flight. The method makes use of tables of downwash factors to find the necessary aerodynamic-influence coefficients for the application of lifting-line theory. Explicit matrix equations of equilibrium are converted into a matrix power series with a finite number of terms by utilizing certain characteristic properties of matrices. The number of terms in the series is determined by a trial-and-error process dependent upon the required accuracy of the solution. Spanwise distributions of angle of attack, airload, shear, bending moment, and pitching moment are readily obtained as functions of qm(sub R) where q denotes the dynamic pressure and mR denotes the lift-curve slope of a rigid wing. This method is intended primarily to make it practical to solve steady-state aeroelastic problems on the ordinary manually operated desk calculators, but the method is also readily adaptable to automatic computing equipment.

  14. Uniform sampling of steady states in metabolic networks: heterogeneous scales and rounding.

    Directory of Open Access Journals (Sweden)

    Daniele De Martino

    Full Text Available The uniform sampling of convex polytopes is an interesting computational problem with many applications in inference from linear constraints, but the performances of sampling algorithms can be affected by ill-conditioning. This is the case of inferring the feasible steady states in models of metabolic networks, since they can show heterogeneous time scales. In this work we focus on rounding procedures based on building an ellipsoid that closely matches the sampling space, that can be used to define an efficient hit-and-run (HR Markov Chain Monte Carlo. In this way the uniformity of the sampling of the convex space of interest is rigorously guaranteed, at odds with non markovian methods. We analyze and compare three rounding methods in order to sample the feasible steady states of metabolic networks of three models of growing size up to genomic scale. The first is based on principal component analysis (PCA, the second on linear programming (LP and finally we employ the Lovazs ellipsoid method (LEM. Our results show that a rounding procedure dramatically improves the performances of the HR in these inference problems and suggest that a combination of LEM or LP with a subsequent PCA perform the best. We finally compare the distributions of the HR with that of two heuristics based on the Artificially Centered hit-and-run (ACHR, gpSampler and optGpSampler. They show a good agreement with the results of the HR for the small network, while on genome scale models present inconsistencies.

  15. Steady-state relative potency of aldosterone antagonists: spironolactone and prorenoate.

    Science.gov (United States)

    McInnes, G T; Shelton, J R; Harrison, I R

    1981-05-01

    The dose ratio approach was used to define the steady-state relative potency of the competitive mineralocorticoid antagonists prorenoate potassium and spironolactone in six healthy male subjects using fludrocortisone as mineralocorticoid agonist. Log fludrocortisone dose-response relationships in the presence or absence of antagonists did not differ from linearity and parallelism, supporting the theoretical basis of the method. Urinary sodium and plasma potassium responses appeared to behave according to the law of mass action, which made possible estimation of the potency of prorenoate relative to spironolactone on a weight basis-4.2:1 (95% C.L. 2.7-6.9:1) and 2.68:1 (95% C.L. 0.71-6.57:1, respectively. The steady-state relative potency for sodium excretion was greater than previously estimated after single doses. Mass action theory could not explain the urinary potassium and log 10 Na/K responses to repeated doses of spironolactone, precluding valid estimation of relative potency for these variables and suggesting that the latter response alone is an unreliable index of overall renal antimineralocorticoid activity.

  16. Cell-Autonomous Gβ Signaling Defines Neuron-Specific Steady State Serotonin Synthesis in Caenorhabditis elegans.

    Science.gov (United States)

    Xu, Lu; Choi, Sunju; Xie, Yusu; Sze, Ji Ying

    2015-09-01

    Heterotrimeric G proteins regulate a vast array of cellular functions via specific intracellular effectors. Accumulating pharmacological and biochemical studies implicate Gβ subunits as signaling molecules interacting directly with a wide range of effectors to modulate downstream cellular responses, in addition to their role in regulating Gα subunit activities. However, the native biological roles of Gβ-mediated signaling pathways in vivo have been characterized only in a few cases. Here, we identified a Gβ GPB-1 signaling pathway operating in specific serotonergic neurons to the define steady state serotonin (5-HT) synthesis, through a genetic screen for 5-HT synthesis mutants in Caenorhabditis elegans. We found that signaling through cell autonomous GPB-1 to the OCR-2 TRPV channel defines the baseline expression of 5-HT synthesis enzyme tryptophan hydroxylase tph-1 in ADF chemosensory neurons. This Gβ signaling pathway is not essential for establishing the serotonergic cell fates and is mechanistically separated from stress-induced tph-1 upregulation. We identified that ADF-produced 5-HT controls specific innate rhythmic behaviors. These results revealed a Gβ-mediated signaling operating in differentiated cells to specify intrinsic functional properties, and indicate that baseline TPH expression is not a default generic serotonergic fate, but is programmed in a cell-specific manner in the mature nervous system. Cell-specific regulation of TPH expression could be a general principle for tailored steady state 5-HT synthesis in functionally distinct neurons and their regulation of innate behavior.

  17. Cell-Autonomous Gβ Signaling Defines Neuron-Specific Steady State Serotonin Synthesis in Caenorhabditis elegans.

    Directory of Open Access Journals (Sweden)

    Lu Xu

    2015-09-01

    Full Text Available Heterotrimeric G proteins regulate a vast array of cellular functions via specific intracellular effectors. Accumulating pharmacological and biochemical studies implicate Gβ subunits as signaling molecules interacting directly with a wide range of effectors to modulate downstream cellular responses, in addition to their role in regulating Gα subunit activities. However, the native biological roles of Gβ-mediated signaling pathways in vivo have been characterized only in a few cases. Here, we identified a Gβ GPB-1 signaling pathway operating in specific serotonergic neurons to the define steady state serotonin (5-HT synthesis, through a genetic screen for 5-HT synthesis mutants in Caenorhabditis elegans. We found that signaling through cell autonomous GPB-1 to the OCR-2 TRPV channel defines the baseline expression of 5-HT synthesis enzyme tryptophan hydroxylase tph-1 in ADF chemosensory neurons. This Gβ signaling pathway is not essential for establishing the serotonergic cell fates and is mechanistically separated from stress-induced tph-1 upregulation. We identified that ADF-produced 5-HT controls specific innate rhythmic behaviors. These results revealed a Gβ-mediated signaling operating in differentiated cells to specify intrinsic functional properties, and indicate that baseline TPH expression is not a default generic serotonergic fate, but is programmed in a cell-specific manner in the mature nervous system. Cell-specific regulation of TPH expression could be a general principle for tailored steady state 5-HT synthesis in functionally distinct neurons and their regulation of innate behavior.

  18. Test-retest reliability of the 40 Hz EEG auditory steady-state response.

    Directory of Open Access Journals (Sweden)

    Kristina L McFadden

    Full Text Available Auditory evoked steady-state responses are increasingly being used as a marker of brain function and dysfunction in various neuropsychiatric disorders, but research investigating the test-retest reliability of this response is lacking. The purpose of this study was to assess the consistency of the auditory steady-state response (ASSR across sessions. Furthermore, the current study aimed to investigate how the reliability of the ASSR is impacted by stimulus parameters and analysis method employed. The consistency of this response across two sessions spaced approximately 1 week apart was measured in nineteen healthy adults using electroencephalography (EEG. The ASSR was entrained by both 40 Hz amplitude-modulated white noise and click train stimuli. Correlations between sessions were assessed with two separate analytical techniques: a channel-level analysis across the whole-head array and b signal-space projection from auditory dipoles. Overall, the ASSR was significantly correlated between sessions 1 and 2 (p<0.05, multiple comparison corrected, suggesting adequate test-retest reliability of this response. The current study also suggests that measures of inter-trial phase coherence may be more reliable between sessions than measures of evoked power. Results were similar between the two analysis methods, but reliability varied depending on the presented stimulus, with click train stimuli producing more consistent responses than white noise stimuli.

  19. Steady state RF facility for testing ITER ICRH RF contact component

    Energy Technology Data Exchange (ETDEWEB)

    Argouarch, A., E-mail: arnaud.argouarch@cea.fr [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Bamber, R. [Euratom/CCFE Association, Culham Science Centre, Abingdon, Oxon, OX143DB (United Kingdom); Bernard, J.M.; Delaplanche, J.M. [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Durodié, F. [Laboratory for Plasmas Physics, 1000 Brussels (Belgium); Larroque, S.; Lecomte, P.; Lombard, G.; Hatchressian, J.C.; Mollard, P.; Mouyon, D.; Pagano, M.; Patterlini, J.C.; Rasio, S.; Soler, B.; Toulouse, L.; Thouvenin, D.; Verger, J.M.; Vigne, T.; Volpe, R. [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France)

    2013-10-15

    After the installation and commissioning of the TITAN [1,2], test facility, a key element – the T resonator – was assembled in order to facilitate testing components at high RF voltages and currents. This work is within the CEA roadmap for testing ITER ICRH components in a relevant environment. Several components of the future ITER ICRH antenna have been targeted. The embedded RF contact within the ITER ICRH antenna appeared as a critical component for antenna performance, requiring extensive R and D. Therefore, CEA has proposed and subsequently prepared a platform to test and validate the anticipated RF contact. A steady state resonator with active water cooling has been manufactured and assembled within the TITAN facility, including a hot pressurized water loop. The program consists of testing the contact at 2.25 kA and 62 MHz in steady state conditions. Sliding tests are also performed at high temperature and vacuum to understand component aging, including wear. The equipment installed is consistent with that required to test an ITER ICRH extensively.

  20. Non-equilibrium steady states of quantum systems on star graphs

    Energy Technology Data Exchange (ETDEWEB)

    Mintchev, Mihail, E-mail: mintchev@df.unipi.it [Istituto Nazionale di Fisica Nucleare and Dipartimento di Fisica, Universita di Pisa, Largo Pontecorvo 3, 56127 Pisa (Italy)

    2011-10-14

    Non-equilibrium steady states of quantum fields on star graphs are explicitly constructed. These states are parametrized by the temperature and the chemical potential, associated with each edge of the graph. Time reversal invariance is spontaneously broken. We study in this general framework the transport properties of the Schroedinger and the Dirac systems on a star graph, modeling a quantum wire junction. The interaction, which drives the system away from equilibrium, is localized in the vertex of the graph. All point-like vertex interactions, giving rise to self-adjoint Hamiltonians possibly involving the minimal coupling to a static electromagnetic field in the ambient space, are considered. In this context, we compute the exact electric steady current and the non-equilibrium charge density. We also investigate the heat transport and derive the Casimir energy density away from equilibrium. The appearance of Friedel-type oscillations of the charge and energy densities along the edges of the graph is established. We focus finally on the noise power and discuss the non-trivial impact of the point-like interactions on the noise. (paper)

  1. Steady state visually evoked potential (SSVEP) topography changes associated with cocoa flavanol consumption.

    Science.gov (United States)

    Camfield, D A; Scholey, A; Pipingas, A; Silberstein, R; Kras, M; Nolidin, K; Wesnes, K; Pase, M; Stough, C

    2012-02-28

    In a randomized, double-blind placebo controlled trial, 63 middle-aged volunteers aged between 40 and 65 years were administered a daily chocolate drink containing 250 mg or 500 mg cocoa flavanols versus a low cocoa flavanol (placebo) drink over a 30-day period. Participants were tested at baseline as well as at the end of the treatment period on a test of Spatial Working Memory. Steady State Probe Topography (SST) was used to assess neurocognitive changes associated with cocoa flavanol supplementation during the completion of the Spatial Working Memory task. SST is an electrophysiological technique which utilizes a 13 Hz diffuse visual flicker in order to generate a steady state visually evoked potential (SSVEP). Changes in the amplitude and phase of the SSVEP response after 30 days were compared between treatment groups. Behavioral measures of accuracy and reaction time were not found to be significantly different between treatment groups, while average SSVEP amplitude and phase differences at a number of posterior parietal and centro-frontal sites were found to be significantly different between groups during memory encoding, the working memory hold period and retrieval. In the absence of significant behavioral effects, these differences in brain activation can be interpreted as evidence of increased neural efficiency in spatial working memory function associated with chronic cocoa flavanol consumption. Copyright © 2011 Elsevier Inc. All rights reserved.

  2. The midpoint between ventilatory thresholds approaches maximal lactate steady state intensity in amateur cyclists.

    Science.gov (United States)

    Peinado, A B; Filho, Dm Pessôa; Díaz, V; Benito, P J; Álvarez-Sánchez, M; Zapico, A G; Calderón, F J

    2016-12-01

    The aim was to determine whether the midpoint between ventilatory thresholds (MPVT) corresponds to maximal lactate steady state (MLSS). Twelve amateur cyclists (21.0 ± 2.6 years old; 72.2 ± 9.0 kg; 179.8 ± 7.5 cm) performed an incremental test (25 W·min-1) until exhaustion and several constant load tests of 30 minutes to determine MLSS, on different occasions. Using MLSS determination as the reference method, the agreement with five other parameters (MPVT; first and second ventilatory thresholds: VT1 and VT2; respiratory exchange ratio equal to 1: RER = 1.00; and Maximum) was analysed by the Bland-Altman method. The difference between workload at MLSS and VT1, VT2, RER=1.00 and Maximum was 31.1 ± 20.0, -86.0 ± 18.3, -63.6 ± 26.3 and -192.3 ± 48.6 W, respectively. MLSS was underestimated from VT1 and overestimated from VT2, RER = 1.00 and Maximum. The smallest difference (-27.5 ± 15.1 W) between workload at MLSS and MPVT was in better agreement than other analysed parameters of intensity in cycling. The main finding is that MPVT approached the workload at MLSS in amateur cyclists, and can be used to estimate maximal steady state.

  3. Selection of Steady-State Process Simulation Software to Optimize Treatment of Radioactive and Hazardous Waste

    Energy Technology Data Exchange (ETDEWEB)

    Nichols, Todd Travis; Barnes, Charles Marshall; Lauerhass, Lance; Taylor, Dean Dalton

    2001-06-01

    The process used for selecting a steady-state process simulator under conditions of high uncertainty and limited time is described. Multiple waste forms, treatment ambiguity, and the uniqueness of both the waste chemistries and alternative treatment technologies result in a large set of potential technical requirements that no commercial simulator can totally satisfy. The aim of the selection process was two-fold. First, determine the steady-state simulation software that best, albeit not completely, satisfies the requirements envelope. And second, determine if the best is good enough to justify the cost. Twelve simulators were investigated with varying degrees of scrutiny. The candidate list was narrowed to three final contenders: ASPEN Plus 10.2, PRO/II 5.11, and CHEMCAD 5.1.0. It was concluded from "road tests" that ASPEN Plus appears to satisfy the project's technical requirements the best and is worth acquiring. The final software decisions provide flexibility: they involve annual rather than multi-year licensing, and they include periodic re-assessment.

  4. Selection of Steady-State Process Simulation Software to Optimize Treatment of Radioactive and Hazardous Waste

    Energy Technology Data Exchange (ETDEWEB)

    Nichols, T. T.; Barnes, C. M.; Lauerhass, L.; Taylor, D. D.

    2001-06-01

    The process used for selecting a steady-state process simulator under conditions of high uncertainty and limited time is described. Multiple waste forms, treatment ambiguity, and the uniqueness of both the waste chemistries and alternative treatment technologies result in a large set of potential technical requirements that no commercial simulator can totally satisfy. The aim of the selection process was two-fold. First, determine the steady-state simulation software that best, albeit not completely, satisfies the requirements envelope. And second, determine if the best is good enough to justify the cost. Twelve simulators were investigated with varying degrees of scrutiny. The candidate list was narrowed to three final contenders: ASPEN Plus 10.2, PRO/II 5.11, and CHEMCAD 5.1.0. It was concluded from ''road tests'' that ASPEN Plus appears to satisfy the project's technical requirements the best and is worth acquiring. The final software decisions provide flexibility: they involve annual rather than multi-year licensing, and they include periodic re-assessment.

  5. Steady-state pharmacokinetics of metformin is independent of the OCT1 genotype in healthy volunteers

    DEFF Research Database (Denmark)

    Christensen, Mette Marie Hougaard; Højlund, Kurt; Hother-Nielsen, Ole

    2015-01-01

    PURPOSE: The aim of the study was to determine the steady-state pharmacokinetics of metformin in healthy volunteers with different numbers of reduced-function alleles in the organic cation transporter 1 gene (OCT1). METHODS: The study was conducted as part of a randomized cross-over trial. Thirty......-four healthy volunteers with known OCT1 genotypes (12 with two wild-type alleles, 13 with one and 9 with two reduced-function alleles) were included. In one of the study periods, they were titrated to steady-state with 1 g metformin twice daily. RESULTS: Neither AUC(0-12), C(max) nor Cl(renal) were...... statistically significantly affected by the number of reduced-function alleles (0, 1 or 2) in OCT1: (AUC(0-12): 0, 1, 2: 14, 13 and 14 h ng/L (P = 0.61)); (C(max): 0, 1, 2: 2192, 1934 and 2233 ng/mL, (P = 0.26)) and (Cl(renal): 0, 1, 2: 31, 28 and 30 L/h (P = 0.57)) CONCLUSIONS: In a cohort of healthy...

  6. Macrophages: Key Regulators of Steady State and Demand-Adapted Hematopoiesis

    Science.gov (United States)

    McCabe, Amanda; MacNamara, Katherine C.

    2016-01-01

    Hematopoietic stem cell (HSC) function is required for balanced blood production throughout life, thus it is essential to understand the mechanisms regulating this highly dynamic process. Bone marrow-resident macrophages (Mϕs) have recently emerged as an important component of the HSC niche where they contribute to regulating HSC and progenitor cell (HSPC) mobilization and function. Here we review the role of Mϕs on immune cell production, HSPC pool size, and mobilization at steady state and under inflammatory conditions. Inflammation induces marked changes in hematopoiesis to restrict or promote generation of specific cell lineages, and this often has a negative impact on hematopoietic stem cell (HSC) function. Cytokines and growth factors induced during inflammation influence hematopoiesis by acting directly on HSPCs and/or by modulating niche cell function. We focus particular attention on the opposing effects of two key inflammatory proteins, interferon gamma (IFNγ) and granulocyte-colony stimulating factor (G-CSF), in regulating bone marrow-resident Mϕs and HSPCs. Mϕs are essential for tissue homeostasis, and here we highlight their emerging role as a central regulator of both steady state and demand-adapted hematopoiesis. PMID:26806720

  7. Macrophages: Key regulators of steady-state and demand-adapted hematopoiesis.

    Science.gov (United States)

    McCabe, Amanda; MacNamara, Katherine C

    2016-04-01

    Hematopoietic stem cell (HSC) function is required for balanced blood production throughout life; it is thus essential to understand the mechanisms regulating this highly dynamic process. Bone marrow-resident macrophages (Mϕs) have recently emerged as an important component of the HSC niche, where they contribute to regulating HSC and progenitor cell (HSPC) mobilization and function. Here we review the role of macrophages (Mϕs) on immune cell production, HSPC pool size, and mobilization at steady state and under inflammatory conditions. Inflammation induces marked changes in hematopoiesis to restrict or promote generation of specific cell lineages, and this often has a negative impact on HSC function. Cytokines and growth factors induced during inflammation influence hematopoiesis by acting directly on HSPCs and/or by modulating niche cell function. We focus particular attention on the opposing effects of two key inflammatory proteins, interferon-γ and granulocyte-colony stimulating factor, in regulating bone marrow-resident macrophages (Mϕs) and HSPCs. Macrophages (Mϕs) are essential for tissue homeostasis, and here we highlight their emerging role as a central regulator of both steady-state and demand-adapted hematopoiesis. Copyright © 2016 ISEH - International Society for Experimental Hematology. Published by Elsevier Inc. All rights reserved.

  8. Monitoring electrochemical reactions in situ using steady-state free precession {sup 13}C NMR spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Nunes, Luiza M.S. [Instituto de Química de São Carlos, Universidade de São Paulo, Avenida Trabalhador São-Carlense 400, São Carlos, São Paulo 13560-070 (Brazil); Embrapa Instrumentação, Rua XV de Novembro 1452, São Carlos, São Paulo 13560-970 (Brazil); Moraes, Tiago B. [Embrapa Instrumentação, Rua XV de Novembro 1452, São Carlos, São Paulo 13560-970 (Brazil); Instituto de Física de São Carlos, Universidade de São Paulo, Avenida Trabalhador São-Carlense 400, São Carlos, São Paulo 13566-590 (Brazil); Barbosa, Lucio L. [Departamento de Química, Universidade Federal do Espírito Santo, Avenida Fernando Ferrari 514, Vitória, Espírito Santo 29075-910 (Brazil); Mazo, Luiz H. [Instituto de Química de São Carlos, Universidade de São Paulo, Avenida Trabalhador São-Carlense 400, São Carlos, São Paulo 13560-070 (Brazil); and others

    2014-11-19

    Highlights: • Analysis of electrochemical reaction in situ by 13C NMR spectroscopy was demonstrated. • {sup 13}C NMR signals are obtained in few minutes, using steady-state free precession (SSFP) pulse sequence. • The analysis is performed in standard NMR spectrometer. • KBDM can be an alternative to Fourier Transform to process SSFP signal. - Abstract: All attempts to use in situ{sup 13}C NMR in spectroelectrochemical studies, using static cells and unlabeled substrates, have failed due to the very long average time (several hours). In this paper, we demonstrated that steady-state free precession (SSFP) pulse sequence can enhance signal to noise ratio and reduces the average time of {sup 13}C NMR signals by more than one order of magnitude. The results showed that each {sup 13}C NMR spectrum during the electrochemical reduction of 9-chloroanthracene, in a static cell, can be acquired in eleven minutes. This short averaging time allowed the analysis of the reaction every 30 min during 3 h. The phase and truncation anomalies present in SSFP spectra were minimized using Traff apodization function and Krylov basis diagonalization method (KBDM)

  9. A high-density EEG investigation into steady state binaural beat stimulation.

    Directory of Open Access Journals (Sweden)

    Peter Goodin

    Full Text Available Binaural beats are an auditory phenomenon that has been suggested to alter physiological and cognitive processes including vigilance and brainwave entrainment. Some personality traits measured by the NEO Five Factor Model have been found to alter entrainment using pulsing light stimuli, but as yet no studies have examined if this occurs using steady state presentation of binaural beats for a relatively short presentation of two minutes. This study aimed to examine if binaural beat stimulation altered vigilance or cortical frequencies and if personality traits were involved. Thirty-one participants were played binaural beat stimuli designed to elicit a response at either the Theta (7 Hz or Beta (16 Hz frequency bands while undertaking a zero-back vigilance task. EEG was recorded from a high-density electrode cap. No significant differences were found in vigilance or cortical frequency power during binaural beat stimulation compared to a white noise control period. Furthermore, no significant relationships were detected between the above and the Big Five personality traits. This suggests a short presentation of steady state binaural beats are not sufficient to alter vigilance or entrain cortical frequencies at the two bands examined and that certain personality traits were not more susceptible than others.

  10. Steady-state light-mechanical quantum steerable correlations in cavity optomechanics

    Science.gov (United States)

    Tan, Huatang; Deng, Wenwu; Wu, Qinglin; Li, Gaoxiang

    2017-05-01

    Einstein-Podolsky-Rosen (EPR) steering is a quantum nonlocal effect which is intrinsically distinct from Bell nonlocality and quantum entanglement. In this paper, we investigate in detail the properties of steady-state light-mechanical Gaussian steerable correlations in a generic cavity optomechanical system. When considering the steering between the intracavity field and the mechanical oscillator, we find that under blue-detuned driving, the steady-state steering via optomechanical parametric downconversion is present in only one direction and, moreover, the steering direction is determined merely by the relative dissipation strength of the cavity to the mechanics. Furthermore, when considering the steering between the cavity output field and the mechanical oscillator, we reveal that under red-detuned driving, strong steering can be achieved in the sideband-unresolved regime for a filtered output field with given central frequency and bandwidth. This steering with the output field can also be present in one way by adjusting the driving strength and exists up to the environment temperature T ≈10 K for the parameters close to those in the recent experiments. Finally, we show that the achieved strong light-mechanical correlations can be explored to realize macroscopic EPR steering of two distant optomechanical oscillators in the regime of unresolved sidebands via entanglement swapping.

  11. Steady-state spin synchronization through the collective motion of trapped ions

    Science.gov (United States)

    Shankar, Athreya; Cooper, John; Bohnet, Justin; Bollinger, John; Holland, Murray

    2017-04-01

    Ultranarrow-linewidth atoms coupled to a lossy optical cavity mode synchronize, i.e. develop correlations, and exhibit steady-state superradiance when continuously repumped. This type of system displays rich collective physics and promises metrological applications. These features inspire us to investigate if a model inspired from cavity superradiance can generate analogous spin synchronization in a different platform that is one of the most robust and controllable experimental testbeds currently available: ion-trap systems. We design a system with a primary and secondary species of ions that share a common set of normal modes of vibration. In analogy to the lossy optical mode, we propose to use a lossy normal mode, obtained by sympathetic cooling with the secondary species of ions, to mediate spin synchronization in the primary species of ions. Our numerical study shows that spin-spin correlations develop, leading to a macroscopic collective spin in steady-state. We propose an experimental method based on Ramsey interferometry to detect signatures of this collective spin; we predict that correlations prolong the visibility of Ramsey fringes, and that population statistics at the end of the Ramsey sequence can be used to directly infer spin-spin correlations.

  12. A Generalized Approach to the Calculation Procedure of Distribution Network Steady-state and Transient Regime

    Directory of Open Access Journals (Sweden)

    Berzan V.

    2015-12-01

    Full Text Available The low-voltage electrical distribution networks are characterized by ramified topology and spatial distribution of the consumers connected to the power supply. This leads to certain difficulties in calculation of such circuits even in the case of steady state mode, since even in stationary case a new separate problem must be solved each time. We have to mention that these difficulties are even more pronounced in the case of the circuit transient analysis. This paper proposes a generalized approach to calculation of steady-state and transient regimes in the branched distribution networks with RLC loads. To solve this problem we propose to use the mesh currents method, representation of the system of equations in matrix form and the Laplace transform. This gives the possibility to determine the characteristics of the current and voltage changes over time in the network and in the load. The difference between the obtained results and the known results, published in the open sources, is determined by the fact that the calculation of stationary and transient modes, is performed using the same calculations algorithm for both stationary and transient regimes.

  13. 'Memory' and sustention of microdischarges in a steady-state DBD: volume plasma or surface charge?

    Science.gov (United States)

    Akishev, Yuri; Aponin, Gregory; Balakirev, Anton; Grushin, Mikhail; Karalnik, Vladimir; Petryakov, Alexander; Trushkin, Nikolay

    2011-04-01

    The results of a numerical study on the spatio-temporal behavior of transient microdischarges (MDs) in a steady-state dielectric barrier discharge (DBD) excited by a sinusoidal voltage are presented. MDs have a spatial 'memory'—every subsequent MD appears at exactly the same location occupied by the MD at the preceding half-period (HP). In the majority of cases each MD appears at its location only once during every HP. For such a case, the memory effect is not attributed to the residual surface charge deposited by the preceding MD but determined by the residual MD plasma column shunting the gap right up to the beginning of the next HP. In contrast to good memory in space, each individual MD has a large scatter with time in its appearance within every HP, i.e. there is no 'memory' concerning the phase of an applied voltage. This MD jittering within the period is attributed to the stochastic nature of partial surface breakdowns around the bases of the MD plasma column. Numerical calculations show that surface breakdown provides an MD current splash at every HP. Hence, in the steady-state DBD, the volume plasma is responsible for the existence of MD spatial 'memory' (i.e. where the MD appears), and the deposited surface charge is responsible for MD jittering in time (i.e. when the MD appears). Hot topic report presented at the 20th ESCAMPIG, 13-17 July 2010, Novi Sad, Serbia.

  14. Effects of initial height on the steady-state persistence probability of linear growth models

    Science.gov (United States)

    Chanphana, R.; Chatraphorn, P.; Dasgupta, C.

    2013-12-01

    The effects of the initial height on the temporal persistence probability of steady-state height fluctuations in up-down symmetric linear models of surface growth are investigated. We study the (1+1)-dimensional Family model and the (1+1)- and (2+1)-dimensional larger curvature (LC) model. Both the Family and LC models have up-down symmetry, so the positive and negative persistence probabilities in the steady state, averaged over all values of the initial height h0, are equal to each other. However, these two probabilities are not equal if one considers a fixed nonzero value of h0. Plots of the positive persistence probability for negative initial height versus time exhibit power-law behavior if the magnitude of the initial height is larger than the interface width at saturation. By symmetry, the negative persistence probability for positive initial height also exhibits the same behavior. The persistence exponent that describes this power-law decay decreases as the magnitude of the initial height is increased. The dependence of the persistence probability on the initial height, the system size, and the discrete sampling time is found to exhibit scaling behavior.

  15. On the validity of tidal turbine array configurations obtained from steady-state adjoint optimisation

    CERN Document Server

    Jacobs, Christian T; Kramer, Stephan C; Funke, Simon W

    2016-01-01

    Extracting the optimal amount of power from an array of tidal turbines requires an intricate understanding of tidal dynamics and the effects of turbine placement on the local and regional scale flow. Numerical models have contributed significantly towards this understanding, and more recently, adjoint-based modelling has been employed to optimise the positioning of the turbines in an array in an automated way and improve on simple, regular man-made configurations. Adjoint-based optimisation of high-resolution and ideally 3D transient models is generally a very computationally expensive problem. As a result, existing work on the adjoint optimisation of tidal turbine placement has been mostly limited to steady-state simulations in which very high, non-physical values of the background viscosity are required to ensure that a steady-state solution exists. However, such compromises may affect the reliability of the modelled turbines, their wakes and interactions, and thus bring into question the validity of the co...

  16. Numerical investigation of steady-state thermal behavior of an infrared detector cryo chamber

    Directory of Open Access Journals (Sweden)

    Singhal Mayank

    2017-01-01

    Full Text Available An infrared (IR detector is simply a transducer of radiant energy, converting radiant energy into a measurable form. Since radiation does not rely on visible light, it offers the possibility of seeing in the dark or through obscured conditions, by detecting the IR energy emitted by objects. One of the prime applications of IR detector systems for military use is in target acquisition and tracking of projectile systems. The IR detectors also have great potential in commercial market. Typically, IR detectors perform best when cooled to cryogenic temperatures in the range of nearly 120 K. However, the necessity to operate in such cryogenic regimes makes the application of IR detectors extremely complex. Further, prior to proceeding on to a full blown transient thermal analysis it is worthwhile to perform a steady-state numerical analysis for ascertaining the effect of variation in viz., material, gas conduction coefficient, h, emissivity, ε, on the temperature profile along the cryo chamber length. This would enable understanding the interaction between the cryo chamber and its environment. Hence, the present work focuses on the development of steady-state numerical models for thermal analysis of IR cryo chamber using MATLAB. The numerical results show that gas conduction coefficient has marked influence on the temperature profile of the cryo chamber whereas the emissivity has a weak effect. The experimental validation of numerical results has also been presented.

  17. Single-dose and steady-state pharmacokinetics of fentanyl buccal tablet in healthy volunteers.

    Science.gov (United States)

    Darwish, Mona; Kirby, Mary; Robertson, Philmore; Hellriegel, Edward; Jiang, John G

    2007-01-01

    This study evaluated the single-dose and steady-state pharmacokinetics of fentanyl buccal tablet 400 microg in healthy adult volunteers. After receiving naltrexone 50 mg to block opioid receptor-mediated effects of fentanyl, subjects received fentanyl buccal tablet 400 microg on day 1, then every 6 hours from day 4 to day 9 (21 doses). Naltrexone 50 mg was administered every 12 hours throughout the study. Plasma fentanyl concentrations were determined for 72 hours after administration of fentanyl buccal tablet 400 microg on day 1 and the last dose of fentanyl buccal tablet 400 microg on day 9. Following single- and multiple-dose administration of fentanyl buccal tablet, the median time to maximum concentration (tmax) was 52.2 and 49.8 minutes, respectively. Peak plasma concentration of fentanyl (Cmax) was 0.88 ng/mL for the single-dose regimen and 1.77 ng/mL for the multiple-dose regimen. Steady state was reached within 5 days, consistent with the observed median half-life of approximately 22 hours following multiple doses. Observed accumulation of fentanyl after multiple doses of fentanyl buccal tablet was slightly greater than would be expected based on the single-dose data. This was attributed to the redistribution of fentanyl from a deep tissue compartment into the plasma. This study indicates that fentanyl buccal tablet has predictable pharmacokinetics following multiple-dose administration.

  18. Modelling the Steady State of Sewage Networks as a Support Tool for Their Planning and Analysis

    Directory of Open Access Journals (Sweden)

    Grażyna Petriczek

    2015-01-01

    Full Text Available Fundamental questions connected with the modelling of communal sewage networks have been considered and formulas used to model the functioning of the basic network have been analyzed. The problem described concerns gravitational sewage networks divided by nodes into branches and sectors. Simulation of the steady state functioning of sewage networks is commonly carried out on the basis of nomograms in the form of charts, in which the relations between network parameters like channel diameters, flow rates, hydraulic slopes and flow velocities are described. In traditional design, the values of such parameters are simply read from such nomogram chart tables. Another way of simulating the functioning of a network is the use of professional software, like SWMM, that models sewage flows along the channels by means of differential equations de-scribing the movement of fluids. In both approaches, the user is a mechanical operator of a "black box" procedure. In this paper, another way of simulating the functioning of sewage net-works has been presented. Numerical solutions of nonlinear equations describing the physical phenomena of sewage flows are applied and explained. The presented algorithms were developed to model the steady state of a sewage network enabling a quick analysis of the network parameters and the possibility of fast, simple and comprehensible network modeling and design. (original abstract

  19. Steady-State Clozapine and Norclozapine Pharmacokinetics in Maori and European Patients.

    Science.gov (United States)

    Menkes, David B; Glue, Paul; Gale, Christopher; Lam, Frederic; Hung, Cheung-Tak; Hung, Noelyn

    2017-12-13

    Clozapine is the most effective drug for treatment-resistant schizophrenia, but its use is limited by toxicity. Because ethnicity has been reported to affect clozapine metabolism, we compared its steady state pharmacokinetics in New Zealand Maori and European patients. Clozapine and norclozapine steady state bioavailability was assessed over 24h under fasting and fed conditions in 12 Maori and 16 European patients treated for chronic psychotic illnesses with stable once-daily clozapine doses. Plasma clozapine and norclozapine concentrations were assessed using liquid chromatography with tandem mass spectrometry; pharmacokinetic parameters were calculated using standard non-compartmental methods, and compared using unpaired t-tests. Mean pharmacokinetic parameters (AUC, Cmax and Cmin) for clozapine and norclozapine were virtually identical in Maori and European subjects, under both fed and fasted conditions. Clozapine bioavailability does not vary between Maori and European patients, and thus does not need to be considered in prescribing decisions. Additional studies are needed to identify if there are differences between Maori and European populations for drugs metabolized by other enzyme pathways. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  20. Fractional Parker equation for the transport of cosmic rays: steady-state solutions

    Science.gov (United States)

    Zimbardo, G.; Perri, S.; Effenberger, F.; Fichtner, H.

    2017-10-01

    Context. The acceleration and transport of energetic particles in astrophysical plasmas can be described by the so-called Parker equation, which is a kinetic equation comprising diffusion terms both in coordinate space and in momentum space. In the past years, it has been found that energetic particle transport in space can be anomalous, for instance, superdiffusive rather than normal diffusive. This requires a revision of the basic transport equation for such circumstances. Aims: Here, we extend the Parker equation to the case of anomalous diffusion by means of fractional derivatives that generalize the usual second-order spatial diffusion operator. Methods: We introduce the left and right Caputo fractional derivatives in space. These derivatives are one of the tools used to describe anomalous transport. We consider the case of steady-state solutions upstream and downstream of a planar shock. Results: We obtain an estimate of the particle acceleration time at shocks in the case of superdiffusion. An analytical solution of the steady-state fractional Parker equation is given by the Mittag-Leffler functions, which correspond to a power-law profile for the energetic particle intensity far upstream of the shock, in agreement with the results obtained from a probabilistic approach to superdiffusion. These functions also correspond to a stretched exponential close upstream of the shock. Conclusions: These results can help to model more precisely the measured fluxes of energetic particles that are accelerated at both interplanetary shocks and supernova remnant shocks.

  1. Monitored steady-state excitation and recovery (MSSER) radiation force imaging using viscoelastic models.

    Science.gov (United States)

    Mauldin, F W; Haider, M A; Loboa, E G; Behler, R H; Euliss, L E; Pfeiler, T W; Gallippi, C M

    2008-07-01

    Acoustic radiation force imaging methods distinguish tissue structure and composition by monitoring tissue responses to applied radiation force excitations. Although these responses are a complex, multidimensional function of the geometric and viscoelastic nature of tissue, simplified discrete biomechanical models offer meaningful insight to the physical phenomena that govern induced tissue motion. Applying Voigt and standard linear viscoelastic tissue models, we present a new radiation force technique - monitored steady-state excitation and recovery (MSSER) imaging - that tracks both steady-state displacement during prolonged force application and transient response following force cessation to estimate tissue mechanical properties such as elasticity and viscosity. In concert with shear wave elasticity imaging (SWEI) estimates for Young's modulus, MSSER methods are useful for estimating tissue mechanical properties independent of the applied force magnitude. We test our methods in gelatin phantoms and excised pig muscle, with confirmation through mechanical property measurement. Our results measured 10.6 kPa, 14.7 kPa, and 17.1 kPa (gelatin) and 122.4 kPa (pig muscle) with less than 10% error. This work demonstrates the feasibility of MSSER imaging and merits further efforts to incorporate relevant mechanical tissue models into the development of novel radiation force imaging techniques.

  2. Approximation of the steady state system state distribution of the M/G/1 retrial queue with impatient customers

    Directory of Open Access Journals (Sweden)

    Stihi Nadjet

    2012-01-01

    Full Text Available For M/G/1 retrial queues with impatient customers, we review the results, concerning the steady state distribution of the system state, presented in the literature. Since the existing formulas are cumbersome (so their utilization in practice becomes delicate or the obtaining of these formulas is impossible, we apply the information theoretic techniques for estimating the above mentioned distribution. More concretely, we use the principle of maximum entropy which provides an adequate methodology for computing a unique estimate for an unknown probability distribution based on information expressed in terms of some given mean value constraints.

  3. Correlation Between Transient Regime and Steady-State Regime on Creep Crack Growth Behavior of Grade 91 Steel

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jae Young; Ekaputra, I. M. W.; Kim, Seon Jin [Pukyong National Univ., Busan (Korea, Republic of); Kim, Woo Gon; Kim, Eung Seon [KAERI, Daejeong (Korea, Republic of)

    2015-12-15

    A correlation between the transient regime and steady state regime on the creep crack growth (CCG) for Grade 91 steel, which is used as the structural material for the Gen-IV reactor systems, was investigated. A series of CCG tests were performed using 1/2' CT specimens under a constant applied load and at a constant temperature of 600 °C. The CCG rates for the transient and steady state regimes were obtained in terms of C* parameter. The transient CCG rate had a close correlation with the steady-state CCG rate, as the slope of the transient CCG data was very similar to that of the steady state data. The transient rate was slower by 5.6 times as compared to the steady state rate. It can be inferred that the steady state CCG rate, which is required for long-time tests, can be predicted from the transient CCG rate obtained from short-time tests.

  4. Integration of steady-state and temporal gene expression data for the inference of gene regulatory networks.

    Directory of Open Access Journals (Sweden)

    Yi Kan Wang

    Full Text Available We develop a new regression algorithm, cMIKANA, for inference of gene regulatory networks from combinations of steady-state and time-series gene expression data. Using simulated gene expression datasets to assess the accuracy of reconstructing gene regulatory networks, we show that steady-state and time-series data sets can successfully be combined to identify gene regulatory interactions using the new algorithm. Inferring gene networks from combined data sets was found to be advantageous when using noisy measurements collected with either lower sampling rates or a limited number of experimental replicates. We illustrate our method by applying it to a microarray gene expression dataset from human umbilical vein endothelial cells (HUVECs which combines time series data from treatment with growth factor TNF and steady state data from siRNA knockdown treatments. Our results suggest that the combination of steady-state and time-series datasets may provide better prediction of RNA-to-RNA interactions, and may also reveal biological features that cannot be identified from dynamic or steady state information alone. Finally, we consider the experimental design of genomics experiments for gene regulatory network inference and show that network inference can be improved by incorporating steady-state measurements with time-series data.

  5. The stochastic quasi-steady-state assumption: Reducing the model but not the noise

    Science.gov (United States)

    Srivastava, Rishi; Haseltine, Eric L.; Mastny, Ethan; Rawlings, James B.

    2011-04-01

    Highly reactive species at small copy numbers play an important role in many biological reaction networks. We have described previously how these species can be removed from reaction networks using stochastic quasi-steady-state singular perturbation analysis (sQSPA). In this paper we apply sQSPA to three published biological models: the pap operon regulation, a biochemical oscillator, and an intracellular viral infection. These examples demonstrate three different potential benefits of sQSPA. First, rare state probabilities can be accurately estimated from simulation. Second, the method typically results in fewer and better scaled parameters that can be more readily estimated from experiments. Finally, the simulation time can be significantly reduced without sacrificing the accuracy of the solution.

  6. An introduction to the formulation of steady-state transport through molecular junctions

    Energy Technology Data Exchange (ETDEWEB)

    Peskin, Uri, E-mail: tx.technion@ac.i [Schulich Faculty of Chemistry and the Lise Meitner Center for Computational Quantum Chemistry, Technion-Israel Institute of Technology, Haifa 32000 (Israel)

    2010-08-14

    A basic theoretical introduction is given for the phenomenon of electronic transport through molecular junctions. The electrode-molecule-electrode system is represented using a model Hamiltonian framework based on separation between the molecular and the electrode single-particle subspaces, using projection operators. The Landauer formulation of the steady-state current through the junction is introduced and the transmission function is derived from basic single-particle quantum scattering theory. Detailed implementations to a generic tight-binding model demonstrate the typical characteristics of the transmission function, and resonant transport through discrete quantum molecular states is analysed in detail. An alternative formulation based on the time-dependent Liouville-von Neumann equation leads to a quantum kinetic representation of the current in terms of rate constants for electron hopping between the molecule and the electrodes. The generalization of this approach to inelastic transport is discussed. (phd tutorial)

  7. Steady-state numerical groundwater flow model of the Great Basin carbonate and alluvial aquifer system

    Science.gov (United States)

    Brooks, Lynette E.; Masbruch, Melissa D.; Sweetkind, Donald S.; Buto, Susan G.

    2014-01-01

    This report describes the construction, calibration, evaluation, and results of a steady-state numerical groundwater flow model of the Great Basin carbonate and alluvial aquifer system that was developed as part of the U.S. Geological Survey National Water Census Initiative to evaluate the nation’s groundwater availability. The study area spans 110,000 square miles across five states. The numerical model uses MODFLOW-2005, and incorporates and tests complex hydrogeologic and hydrologic elements of a conceptual understanding of an interconnected groundwater system throughout the region, including mountains, basins, consolidated rocks, and basin fill. The level of discretization in this model has not been previously available throughout the study area.

  8. Quench Limit Model and Measurements for Steady State Heat Deposits in LHC Magnets

    CERN Document Server

    Bocian, D; Siemko, A

    2009-01-01

    A quench, transition of a conductor from the superconducting to the normal conducting state, occurs irreversibly in accelerator magnets if one of the three parameters: temperature, magnetic field or current density, exceeds its critical value. The protons lost from the beam and impacting on the vacuum chamber, create a secondary particle shower that deposes its energy in the magnet coil. Energy deposited in the superconductor by these particles can provoke quenches that can be detrimental for the accelerator operation. A network model is developed to study the thermodynamic behavior of the LHC magnets. The results of the heat flow simulation in the main dipole and quadrupole LHC magnets calculated by means of the network model were validated with measurements performed at superfluid helium temperatures in the CERN magnet test facility. A steady state heat flow was introduced in the magnet coil by using a dedicated internal heating apparatus (IHA) installed inside the magnet cold bore. The value of the heat so...

  9. Electrified Flow in Slender V-Groove Microchannels: Generalized Stability of Steady State Configurations

    Science.gov (United States)

    Markeviciute, Vilda; White, Nicholas; Troian, Sandra

    2017-11-01

    Although spontaneous capillary flow can be an especially rapid process in slender open microchannels resembling V-grooves, enhanced flow control is possible through implementation of electric field distributions which generate opposing electrohydrodynamic pressures along the air/liquid interface to modulate the capillary pressures. Important fundamental work by Romero and Yost (1996) and Weislogel(1996) has elucidated the behavior of Newtonian films in slender V-grooves driven to flow solely by the streamwise change in capillary pressure due to the change in radius of curvature of the circular arc describing the interface of wetting or non-wetting fluids. Here we augment the Romero and Yost model with inclusion of Maxwell stresses for perfectly conducting wetting films and examine which electric field distributions allow formation of steady state film shapes for various inlet and outlet boundary conditions. We investigate the stability of these steady solutions to small perturbations in film thickness using a generalized stability analysis. These results reveal how the ratio of Maxwell to capillary stresses influences the degree of linearized transient growth or decay for thin films confined to flow within an open V-groove. Funding from the 2017 Caltech Summer Undergraduate Research Fellowship Program (Markeviciute) as well as a 2017 NASA Space Technology Research Fellowship (White) is gratefully acknowledged.

  10. Steady-state hydrogen peroxide induces glycolysis in Staphylococcus aureus and Pseudomonas aeruginosa.

    Science.gov (United States)

    Deng, Xin; Liang, Haihua; Ulanovskaya, Olesya A; Ji, Quanjiang; Zhou, Tianhong; Sun, Fei; Lu, Zhike; Hutchison, Alan L; Lan, Lefu; Wu, Min; Cravatt, Benjamin F; He, Chuan

    2014-07-01

    Glyceraldehyde-3-phosphate dehydrogenase (GAPDH) from human pathogens Staphylococcus aureus and Pseudomonas aeruginosa can be readily inhibited by reactive oxygen species (ROS)-mediated direct oxidation of their catalytic active cysteines. Because of the rapid degradation of H2O2 by bacterial catalase, only steady-state but not one-dose treatment with H2O2 rapidly induces glycolysis and the pentose phosphate pathway (PPP). We conducted transcriptome sequencing (RNA-seq) analyses to globally profile the bacterial transcriptomes in response to a steady level of H2O2, which revealed profound transcriptional changes, including the induced expression of glycolytic genes in both bacteria. Our results revealed that the inactivation of GAPDH by H2O2 induces metabolic levels of glycolysis and the PPP; the elevated levels of fructose 1,6-biphosphate (FBP) and 2-keto-3-deoxy-6-phosphogluconate (KDPG) lead to dissociation of their corresponding glycolytic repressors (GapR and HexR, respectively) from their cognate promoters, thus resulting in derepression of the glycolytic genes to overcome H2O2-stalled glycolysis in S. aureus and P. aeruginosa, respectively. Both GapR and HexR may directly sense oxidative stresses, such as menadione. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

  11. Heating, current drive and confinement regimes with the JET ICRH and LHCD systems

    DEFF Research Database (Denmark)

    Jacquinot, J.; Adams, J.M.; Altmann, H.

    1991-01-01

    by pellet injection. A value of n(d) tau-E T(i) = 7.8 x 10(20) m-3 s keV was obtained in this mode with T(e) approximately T(i) approximately 11 keV. In the L-mode regime, a regime, a record (140 kW) D-He-3 fusion power was generated with 10 - 14 MW of ICRH at the He-3 cyclotron frequency. Experiments were......-mode conditions. A maximum power of 22 MW was coupled to L-mode plasmas. High quality H-modes (tau-E greater-than-or-equal-to 2.5 tau-EG) were achieved using dipole phasing. A new high confinement mode was discovered. It combines the properties of the H-mode regime to the low central diffusivities obtained...... performed with the prototype launcher of the Lower Hybrid Current Drive (LHCD) systems with coupled power up to 1.6 MW with current drive efficiencies up to R I(CD)/P = 0.4 x 10(20) m-2 A/W. Fast electrons are driven by LHCD to tail temperatures of 100 keV with a hollow radial profile...

  12. Maintenance and preparation of the 3.7 GHz LHCD system for WEST operation

    Science.gov (United States)

    Delpech, Léna; Achard, Joelle; Armitano, Arthur; Bienvenu, Paul; Prou, Marc

    2017-10-01

    The generator for the 3.7 GHz Lower Hybrid Current Drive (LHCD) system on Tore Supra consists of 16 klystrons capable of delivering 600kW/1000s each on plasma. Such a powerful installation needs to be operated on a regular basis in order to preserve the specifications of the klystrons in terms of output power and pulse duration. This has been of particular importance during the long shutdown between the last Tore Supra campaign in 2011 [1] and the start of LHCD experiments on WEST in 2017. The TH2103C klystrons have been operated on matched load once a year during the shutdown. A reduction of 14% of the available RF power for the experimental program is found, which is partly due to the loss of one klystron. Another important aspect of the maintenance procedure is to maintain the knowledge of the operating team at a good level. This paper describes the procedure and tests performed during six years of shut-down. It also summarizes the technical problems encountered and the consequences on the test schedule, and highlights the importance of maintaining such large plants in operating condition during shutdowns.

  13. Pre-steady state of reaction of nucleoside diphosphate kinase with anti-HIV nucleotides.

    Science.gov (United States)

    Schneider, B; Xu, Y W; Sellam, O; Sarfati, R; Janin, J; Veron, M; Deville-Bonne, D

    1998-05-08

    The pre-steady-state reaction of Dictyostelium nucleoside diphosphate (NDP) kinase with dideoxynucleotide triphosphates (ddNTP) and AZT triphosphate was studied by quenching of protein fluorescence after manual mixing or by stopped flow. The fluorescence signal, which is correlated with the phosphorylation state of the catalytic histidine in the enzyme active site, decreases upon ddNTP addition according to a monoexponential time course. The pseudo-first order rate constant was determined for different concentrations of the various ddNTPs and was found to be saturable. The data are compatible with a two-step reaction scheme, where fast association of the enzyme with the dideoxynucleotide is followed by a rate-limiting phosphorylation step. The rate constants and dissociation equilibrium constants determined for each dideoxynucleotide were correlated with the steady-state kinetic parameters measured in the enzymatic assay in the presence of the two substrates. It is shown that ddNTPs and AZT triphosphate are poor substrates for NDP kinase with a rate of phosphate transfer of 0.02 to 3.5 s-1 and a KS of 1-5 mM. The equilibrium dissociation constants for ADP, GDP, ddADP, and ddGDP were also determined by fluorescence titration of a mutant F64W NDP kinase, where the introduction of a tryptophan at the nucleotide binding site provides a direct spectroscopic probe. The lack of the 3'-OH in ddNTP causes a 10-fold increase in KD. Contrary to "natural" NTPs, NDP kinase discriminates between various ddNTPs, with ddGTP the more efficient and ddCTP the least efficient substrate within a range of 100 in kcat values.

  14. Intrinsic Noise Profoundly Alters the Dynamics and Steady State of Morphogen-Controlled Bistable Genetic Switches.

    Directory of Open Access Journals (Sweden)

    Ruben Perez-Carrasco

    2016-10-01

    Full Text Available During tissue development, patterns of gene expression determine the spatial arrangement of cell types. In many cases, gradients of secreted signalling molecules-morphogens-guide this process by controlling downstream transcriptional networks. A mechanism commonly used in these networks to convert the continuous information provided by the gradient into discrete transitions between adjacent cell types is the genetic toggle switch, composed of cross-repressing transcriptional determinants. Previous analyses have emphasised the steady state output of these mechanisms. Here, we explore the dynamics of the toggle switch and use exact numerical simulations of the kinetic reactions, the corresponding Chemical Langevin Equation, and Minimum Action Path theory to establish a framework for studying the effect of gene expression noise on patterning time and boundary position. This provides insight into the time scale, gene expression trajectories and directionality of stochastic switching events between cell states. Taking gene expression noise into account predicts that the final boundary position of a morphogen-induced toggle switch, although robust to changes in the details of the noise, is distinct from that of the deterministic system. Moreover, the dramatic increase in patterning time close to the boundary predicted from the deterministic case is substantially reduced. The resulting stochastic switching introduces differences in patterning time along the morphogen gradient that result in a patterning wave propagating away from the morphogen source with a velocity determined by the intrinsic noise. The wave sharpens and slows as it advances and may never reach steady state in a biologically relevant time. This could explain experimentally observed dynamics of pattern formation. Together the analysis reveals the importance of dynamical transients for understanding morphogen-driven transcriptional networks and indicates that gene expression noise can

  15. Fundamental aspects of steady-state conversion of heat to work at the nanoscale

    Science.gov (United States)

    Benenti, Giuliano; Casati, Giulio; Saito, Keiji; Whitney, Robert S.

    2017-06-01

    In recent years, the study of heat to work conversion has been re-invigorated by nanotechnology. Steady-state devices do this conversion without any macroscopic moving parts, through steady-state flows of microscopic particles such as electrons, photons, phonons, etc. This review aims to introduce some of the theories used to describe these steady-state flows in a variety of mesoscopic or nanoscale systems. These theories are introduced in the context of idealized machines which convert heat into electrical power (heat-engines) or convert electrical power into a heat flow (refrigerators). In this sense, the machines could be categorized as thermoelectrics, although this should be understood to include photovoltaics when the heat source is the sun. As quantum mechanics is important for most such machines, they fall into the field of quantum thermodynamics. In many cases, the machines we consider have few degrees of freedom, however the reservoirs of heat and work that they interact with are assumed to be macroscopic. This review discusses different theories which can take into account different aspects of mesoscopic and nanoscale physics, such as coherent quantum transport, magnetic-field induced effects (including topological ones such as the quantum Hall effect), and single electron charging effects. It discusses the efficiency of thermoelectric conversion, and the thermoelectric figure of merit. More specifically, the theories presented are (i) linear response theory with or without magnetic fields, (ii) Landauer scattering theory in the linear response regime and far from equilibrium, (iii) Green-Kubo formula for strongly interacting systems within the linear response regime, (iv) rate equation analysis for small quantum machines with or without interaction effects, (v) stochastic thermodynamic for fluctuating small systems. In all cases, we place particular emphasis on the fundamental questions about the bounds on ideal machines. Can magnetic-fields change the

  16. Numerical simulation of pool boiling for steady state and transient heating

    Energy Technology Data Exchange (ETDEWEB)

    He, Ying; Shoji, Masahiro; Maruyama, Shigeo

    1999-07-01

    It's believed that the macrolayer plays an important role in nucleate and transition boiling heat transfer at high heat flux. Many experiments have been carried out to support the macrolayer evaporation model, however, little has been conducted in the numerical simulation of boiling heat transfer. In this study, based on the macrolayer evaporation model of Maruyama et al. (1992), a numerical simulation of pool boiling for steady state was carried out. The key points of the simulation are: (1) It is modeled that the macrolayer containing vapor stems occupies the region immediately next to the wall and that the vapor stems are formed on the active cavity sites. (2) Not only does the evaporation occur at the vapor bubble-macrolayer interface, but also at the liquid-vapor stem interface. (3) The macrolayers form periodically. No liquid is supplied to the macrolayers during the hovering period. While the vapor mass departs from the surface, the macrolayers replenish immediately despite the complicity of the transition period between the departures of two vapor masses. The major results are: (1) The boiling curves of water and FC-72 (C{sub 6}F{sub 14}) were reasonably predicted. (2) The temporal variations in surface temperature for different boiling regimes were obtained. Secondly, the simulation of transient pool boiling was conducted. It was realized with following assumptions: (1) The macrolayer evaporation model can be extended to the transient pool boiling. The macrolayer forms cyclically and its thickness is determined by the surface heat flux when the vapor mass takes off. (2) One-dimensional transient heat conduction within the heater coupled with the macrolayer model was considered. Being employed explicit FDM, the instantaneous surface temperature can be obtained. Therefore, the instantaneous heat flux can be calculated by applying the surface temperature into the macrolayer model. (3) In the transition-boiling regime, the initial thickness of macrolayer

  17. Pu recycling in a full Th-MOX PWR core. Part I: Steady state analysis

    Energy Technology Data Exchange (ETDEWEB)

    Fridman, E., E-mail: e.fridman@fzd.d [Institute of Safety Research, Forschungszentrum Dresden-Rossendorf, POB 51 01 19, Dresden 01314 (Germany); Kliem, S. [Institute of Safety Research, Forschungszentrum Dresden-Rossendorf, POB 51 01 19, Dresden 01314 (Germany)

    2011-01-15

    Research highlights: Detailed 3D 100% Th-MOX PWR core design is developed. Pu incineration increased by a factor of 2 as compared to a full MOX PWR core. The core controllability under steady state conditions is demonstrated. - Abstract: Current practice of Pu recycling in existing Light Water Reactors (LWRs) in the form of U-Pu mixed oxide fuel (MOX) is not efficient due to continuous Pu production from U-238. The use of Th-Pu mixed oxide (TOX) fuel will considerably improve Pu consumption rates because virtually no new Pu is generated from thorium. In this study, the feasibility of Pu recycling in a typical pressurized water reactor (PWR) fully loaded with TOX fuel is investigated. Detailed 3-dimensional 100% TOX and 100% MOX PWR core designs are developed. The full MOX core is considered for comparison purposes. The design stages included determination of Pu loading required to achieve 18-month fuel cycle assuming three-batch fuel management scheme, selection of poison materials, development of the core loading pattern, optimization of burnable poison loadings, evaluation of critical boron concentration requirements, estimation of reactivity coefficients, core kinetic parameters, and shutdown margin. The performance of the MOX and TOX cores under steady-state condition and during selected reactivity initiated accidents (RIAs) is compared with that of the actual uranium oxide (UOX) PWR core. Part I of this paper describes the full TOX and MOX PWR core designs and reports the results of steady state analysis. The TOX core requires a slightly higher initial Pu loading than the MOX core to achieve the target fuel cycle length. However, the TOX core exhibits superior Pu incineration capabilities. The significantly degraded worth of control materials in Pu cores is partially addressed by the use of enriched soluble boron and B{sub 4}C as a control rod absorbing material. Wet annular burnable absorber (WABA) rods are used to flatten radial power distribution. The

  18. Brain-computer interfaces using capacitive measurement of visual or auditory steady-state responses.

    Science.gov (United States)

    Baek, Hyun Jae; Kim, Hyun Seok; Heo, Jeong; Lim, Yong Gyu; Park, Kwang Suk

    2013-04-01

    Brain-computer interface (BCI) technologies have been intensely studied to provide alternative communication tools entirely independent of neuromuscular activities. Current BCI technologies use electroencephalogram (EEG) acquisition methods that require unpleasant gel injections, impractical preparations and clean-up procedures. The next generation of BCI technologies requires practical, user-friendly, nonintrusive EEG platforms in order to facilitate the application of laboratory work in real-world settings. A capacitive electrode that does not require an electrolytic gel or direct electrode-scalp contact is a potential alternative to the conventional wet electrode in future BCI systems. We have proposed a new capacitive EEG electrode that contains a conductive polymer-sensing surface, which enhances electrode performance. This paper presents results from five subjects who exhibited visual or auditory steady-state responses according to BCI using these new capacitive electrodes. The steady-state visual evoked potential (SSVEP) spelling system and the auditory steady-state response (ASSR) binary decision system were employed. Offline tests demonstrated BCI performance high enough to be used in a BCI system (accuracy: 95.2%, ITR: 19.91 bpm for SSVEP BCI (6 s), accuracy: 82.6%, ITR: 1.48 bpm for ASSR BCI (14 s)) with the analysis time being slightly longer than that when wet electrodes were employed with the same BCI system (accuracy: 91.2%, ITR: 25.79 bpm for SSVEP BCI (4 s), accuracy: 81.3%, ITR: 1.57 bpm for ASSR BCI (12 s)). Subjects performed online BCI under the SSVEP paradigm in copy spelling mode and under the ASSR paradigm in selective attention mode with a mean information transfer rate (ITR) of 17.78 ± 2.08 and 0.7 ± 0.24 bpm, respectively. The results of these experiments demonstrate the feasibility of using our capacitive EEG electrode in BCI systems. This capacitive electrode may become a flexible and non-intrusive tool fit for various applications in

  19. Moxidectin steady state prior to inoculation protects cats from subsequent, repeated infection with Dirofilaria immitis.

    Science.gov (United States)

    Little, Susan E; Hostetler, Joe A; Thomas, Jennifer E; Bailey, Keith L; Barrett, Anne W; Gruntmeir, Kaylynn; Gruntmeir, Jeff; Starkey, Lindsay A; Basel, Chris; Blagburn, Byron L

    2015-02-18

    Infection of cats with Dirofilaria immitis causes seroconversion on antibody tests and pulmonary pathology, often without subsequent development of adult heartworms. Consistent administration of topical 10% imidacloprid-1% moxidectin has been shown to result in sustained plasma levels of moxidectin in cats after three to five treatments, a pharmacokinetic behavior known as "steady state". To evaluate the ability of moxidectin at "steady state" to protect cats from subsequent infection with D. immitis, cats (n = 10) were treated with the labeled dose of topical 10% imidacloprid-1% moxidectin for four monthly treatments. Each cat was inoculated with 25 third-stage larvae of D. immitis 7, 14, 21, and 28 days after the last treatment; non-treated cats (n = 9) were inoculated on the same days, serving as infection controls. Blood samples were collected from each cat from 1 month prior to treatment until 7 months after the final inoculation and tested for antibody to, and antigen and microfilaria of, D. immitis. Measurement of serum levels of moxidectin confirmed steady state in treated cats. Cats treated with topical 10% imidacloprid-1% moxidectin prior to trickle inoculation of D. immitis L3 larvae throughout the 28 day post-treatment period remained negative on antibody and antigen tests throughout the study and did not develop gross or histologic lesions characteristic of heartworm infection. A majority of non-treated cats tested antibody positive by 3-4 months post infection (6/9) and, after heat treatment, tested antigen positive by 6-7 months post-infection (5/9). Histologic lesions characteristic of D. immitis infection, including intimal and medial thickening of the pulmonary artery, were present in every cat with D. immitis antibodies (6/6), although adult D. immitis were confirmed in only 5/6 antibody-positive cats at necropsy. Microfilariae were not detected at any time. Taken together, these data indicate that prior treatment with 10% imidacloprid-1

  20. Steady-state crack growth in single crystals under Mode I loading

    DEFF Research Database (Denmark)

    Juul, Kristian Jørgensen; Nielsen, Kim Lau; Niordson, Christian Frithiof

    2017-01-01

    that the largest shielding effect develops in HCP crystals, while the lowest shielding exists for FCC crystals. Rate-sensitivity is found to affect the plastic zone size, but the characteristics overall remain similar for each individual crystal structure. An increasing rate-sensitivity at low crack velocities......The active plastic zone that surrounds the tip of a sharp crack growing under plane strain Mode I loading conditions at a constant velocity in a single crystal is studied. Both the characteristics of the plastic zone and its effect on the macroscopic toughness is investigated in terms of crack tip...... shielding due to plasticity (quantified by employing the Suo, Shih, and Varias set-up). Three single crystals (FCC, BCC, HCP) are modelled in a steady-state elastic visco-plastic framework, with emphasis on the influence of rate-sensitivity and crystal structures. Distinct velocity discontinuities...

  1. Approximate semi-analytical solutions for the steady-state expansion of a contactor plasma

    Science.gov (United States)

    Camporeale, E.; Hogan, E. A.; MacDonald, E. A.

    2015-04-01

    We study the steady-state expansion of a collisionless, electrostatic, quasi-neutral plasma plume into vacuum, with a fluid model. We analyze approximate semi-analytical solutions, that can be used in lieu of much more expensive numerical solutions. In particular, we focus on the earlier studies presented in Parks and Katz (1979 American Institute of Aeronautics, Astronautics Conf. vol 1), Korsun and Tverdokhlebova (1997 33rd Joint Prop. Conf. (Seattle, WA) AIAA-97-3065), and Ashkenazy and Fruchtman (2001 27th Int. Electric Propulsion Conf. (Pasadena, CA)). By calculating the error with respect to the numerical solution, we can judge the range of validity for each solution. Moreover, we introduce a generalization of earlier models that has a wider range of applicability, in terms of plasma injection profiles. We conclude by showing a straightforward way to extend the discussed solutions to the case of a plasma plume injected with non-null azimuthal velocity.

  2. Preliminary results of steady state characterization of near term electric vehicle breadboard propulsion system

    Science.gov (United States)

    Sargent, N. B.

    1980-01-01

    The steady state test results on a breadboard version of the General Electric Near Term Electric Vehicle (ETV-1) are discussed. The breadboard was built using exact duplicate vehicle propulsion system components with few exceptions. Full instrumentation was provided to measure individual component efficiencies. Tests were conducted on a 50 hp dynamometer in a road load simulator facility. Characterization of the propulsion system over the lower half of the speed-torque operating range has shown the system efficiency to be composed of a predominant motor loss plus a speed dependent transaxle loss. At the lower speeds with normal road loads the armature chopper loss is also a significant factor. At the conditions corresponding to a cycle for which the vehicle system was specifically designed, the efficiencies are near optimum.

  3. Room-temperature steady-state optomechanical entanglement on a chip

    Science.gov (United States)

    Zou, Chang-Ling; Zou, Xu-Bo; Sun, Fang-Wen; Han, Zheng-Fu; Guo, Guang-Can

    2011-09-01

    A potential experimental system, based on high-stress stoichiometric silicon nitride (Si3N4), is proposed to generate steady-state optomechanical entanglement at room temperature. In the proposed structure, a nanostring interacts dispersively and reactively with a microdisk cavity via the evanescent field. We study the role of both dispersive and reactive couplings in generating optomechanical entanglement, and show that the room-temperature entanglement can be effectively obtained through the dispersive couplings under the reasonable experimental parameters. In particular, in the limits of high temperature (T) and high mechanical quality factor (Qm), we find that the logarithmic entanglement depends only on the ratio T/Qm. This indicates that improvements of the material quantity and structure design may lead to more efficient generation of stationary high-temperature entanglement.

  4. Room-temperature steady-state optomechanical entanglement on a chip

    Energy Technology Data Exchange (ETDEWEB)

    Zou Changling; Zou Xubo; Sun Fangwen; Han Zhengfu; Guo Guangcan [Key Laboratory of Quantum Information, University of Science and Technology of China, Hefei, Anhui 230026 (China)

    2011-09-15

    A potential experimental system, based on high-stress stoichiometric silicon nitride (Si{sub 3}N{sub 4}), is proposed to generate steady-state optomechanical entanglement at room temperature. In the proposed structure, a nanostring interacts dispersively and reactively with a microdisk cavity via the evanescent field. We study the role of both dispersive and reactive couplings in generating optomechanical entanglement, and show that the room-temperature entanglement can be effectively obtained through the dispersive couplings under the reasonable experimental parameters. In particular, in the limits of high temperature (T) and high mechanical quality factor (Q{sub m}), we find that the logarithmic entanglement depends only on the ratio T/Q{sub m}. This indicates that improvements of the material quantity and structure design may lead to more efficient generation of stationary high-temperature entanglement.

  5. Comparison of Steady-State SVC Models in Load Flow Calculations

    DEFF Research Database (Denmark)

    Chen, Peiyuan; Chen, Zhe; Bak-Jensen, Birgitte

    2008-01-01

    This paper compares in a load flow calculation three existing steady-state models of static var compensator (SVC), i.e. the generator-fixed susceptance model, the total susceptance model and the firing angle model. The comparison is made in terms of the voltage at the SVC regulated bus, equivalent...... SVC susceptance at the fundamental frequency and the load flow convergence rate both when SVC is operating within and on the limits. The latter two models give inaccurate results of the equivalent SVC susceptance as compared to the generator model due to the assumption of constant voltage when the SVC...... of the calculated SVC susceptance while retaining acceptable load flow convergence rate....

  6. Cutting edge: Salivary gland NK cells develop independently of Nfil3 in steady-state.

    Science.gov (United States)

    Cortez, Victor S; Fuchs, Anja; Cella, Marina; Gilfillan, Susan; Colonna, Marco

    2014-05-15

    Nfil3 is viewed as an obligate transcription factor for NK cell development. However, mouse CMV (MCMV) infection recently was shown to bypass the requirement for Nfil3 by inducing the appearance of NK cells that express the MCMV-specific receptor Ly49H. Thus, signals transmitted by Ly49H and proinflammatory cytokines are sufficient to promote NK cell differentiation in the absence of Nfil3. In this study, we report that salivary gland (SG) NK cells develop in an Nfil3-independent fashion in the steady-state in the absence of MCMV or any infection. Moreover, we show that SG NK cells have an integrin profile reminiscent of tissue-resident lymphocytes and express TRAIL for killing target cells. These results demonstrate that SG NK cells, although related to conventional NK cells, are a distinct subset of innate lymphoid cells that deviates from the conventional developmental pathway, perhaps under the influence of tissue-specific factors.

  7. Fast Virtual Fractional Flow Reserve Based Upon Steady-State Computational Fluid Dynamics Analysis

    Directory of Open Access Journals (Sweden)

    Paul D. Morris, PhD

    2017-08-01

    Full Text Available Fractional flow reserve (FFR-guided percutaneous intervention is superior to standard assessment but remains underused. The authors have developed a novel “pseudotransient” analysis protocol for computing virtual fractional flow reserve (vFFR based upon angiographic images and steady-state computational fluid dynamics. This protocol generates vFFR results in 189 s (cf >24 h for transient analysis using a desktop PC, with <1% error relative to that of full-transient computational fluid dynamics analysis. Sensitivity analysis demonstrated that physiological lesion significance was influenced less by coronary or lesion anatomy (33% and more by microvascular physiology (59%. If coronary microvascular resistance can be estimated, vFFR can be accurately computed in less time than it takes to make invasive measurements.

  8. [Fitting hearing aids in early childhood based on auditory evoked potentials in steady states].

    Science.gov (United States)

    Zenker Castro, F; Fernández Belda, R; Barajas de Prat, J J

    2006-11-01

    The purpose of the Newborn Hearing Screening Program is to achieve early. Identification and appropriate intervention for hearing loss. Hearing aids are the most frequent intervention for deafness. Paediatric specific clinical protocols for fitting hearing aids always recommend accurate characterisation of hearing thresholds in newborns. In this sense, electrophysiological procedures are specially indicated in determined hearing sensibility from the first age of life since it is an objective and reliable procedure. 20 normal hearing subject and 17 hearing loss subjects participated in this study. Auditory Steady State Responses (ASSR) were obtained from all of them. Hearing aid fitting was established from the electrophysiological responses. Dynamic range, gain, compression ratio and maximum output of the hearing aid were obtained from the intensity amplitude function of the ASSR. The procedure discussed in this study is specially indicated in newborns and very young children in which other test are not suitable.

  9. A Method for Online Steady State Energy Minimization with Application to Refrigeration Systems

    DEFF Research Database (Denmark)

    Larsen, Lars Finn Slot; Thybo, Claus; Stoustrup, Jakob

    2004-01-01

    Energy efficiency of refrigeration systems has gradually been improved with the help of control schemes utilizing the more flexible components; the efficiency is though yet far from optimal. The flexibility initiates a higher degree of freedom in choosing the operating set points while obtaining...... the required cooling capacity. This paper proposes an approach which utilizes this newly gained degree of freedom to drive the system towards the energy optimal set-point while keeping up the cooling capacity. The focus of this paper is on refrigeration system however the generality of the proposed method thus...... applies to a broader range of process systems where the lower level set-points (in the control hierarchy) can be chosen within a degree of freedom allowing an optimization of a steady state performance index....

  10. Vesicle dynamics in a confined Poiseuille flow: From steady state to chaos

    Science.gov (United States)

    Aouane, Othmane; Thiébaud, Marine; Benyoussef, Abdelilah; Wagner, Christian; Misbah, Chaouqi

    2014-09-01

    Red blood cells (RBCs) are the major component of blood, and the flow of blood is dictated by that of RBCs. We employ vesicles, which consist of closed bilayer membranes enclosing a fluid, as a model system to study the behavior of RBCs under a confined Poiseuille flow. We extensively explore two main parameters: (i) the degree of confinement of vesicles within the channel and (ii) the flow strength. Rich and complex dynamics for vesicles are revealed, ranging from steady-state shapes (in the form of parachute and slipper shapes) to chaotic dynamics of shape. Chaos occurs through a cascade of multiple periodic oscillations of the vesicle shape. We summarize our results in a phase diagram in the parameter plane (degree of confinement and flow strength). This finding highlights the level of complexity of a flowing vesicle in the small Reynolds number where the flow is laminar in the absence of vesicles and can be rendered turbulent due to elasticity of vesicles.

  11. Exact solution to the steady-state dynamics of a periodically modulated resonator

    Directory of Open Access Journals (Sweden)

    Momchil Minkov

    2017-07-01

    Full Text Available We provide an analytic solution to the coupled-mode equations describing the steady-state of a single periodically modulated optical resonator driven by a monochromatic input. The phenomenology of this system was qualitatively understood only in the adiabatic limit, i.e., for low modulation speed. However, both in and out of this regime, we find highly non-trivial effects for specific parameters of the modulation. For example, we show complete suppression of the transmission even with zero detuning between the input and the static resonator frequency. We also demonstrate the possibility for complete, lossless frequency conversion of the input into the sideband frequencies, as well as for optimizing the transmitted signal towards a given target temporal waveform. The analytic results are validated by first-principle simulations.

  12. Ignition phase and steady-state structures of a non-thermal air plasma

    CERN Document Server

    Lu Xin Pei

    2003-01-01

    An AC-driven, non-thermal, atmospheric pressure air plasma is generated within the gap separating a disc-shaped metal electrode and a water electrode. The ignition phase and the steady-state are studied by a high-speed CCD camera. It is found that the plasma always initiates at the surface of the water electrode. The plasma exhibits different structures depending on the polarity of the water electrode: when the water electrode plays the role of cathode, a relatively wide but visibly dim plasma column is generated. At the maximum driving voltage, the gas temperature is between 800 and 900 K, and the peak current is 67 mA; when the water electrode is anode, the plasma column narrows but increases its light emission. The gas temperature in this case is measured to be in the 1400-1500 K range, and the peak current is 81 mA.

  13. Steady-State Anderson Accelerated Coupling of Lattice Boltzmann and Navier–Stokes Solvers

    KAUST Repository

    Atanasov, Atanas

    2016-10-17

    We present an Anderson acceleration-based approach to spatially couple three-dimensional Lattice Boltzmann and Navier–Stokes (LBNS) flow simulations. This allows to locally exploit the computational features of both fluid flow solver approaches to the fullest extent and yields enhanced control to match the LB and NS degrees of freedom within the LBNS overlap layer. Designed for parallel Schwarz coupling, the Anderson acceleration allows for the simultaneous execution of both Lattice Boltzmann and Navier–Stokes solver. We detail our coupling methodology, validate it, and study convergence and accuracy of the Anderson accelerated coupling, considering three steady-state scenarios: plane channel flow, flow around a sphere and channel flow across a porous structure. We find that the Anderson accelerated coupling yields a speed-up (in terms of iteration steps) of up to 40% in the considered scenarios, compared to strictly sequential Schwarz coupling.

  14. Burn-up dependent steady-state thermal hydraulic analysis of Pakistan research reactor-1

    Directory of Open Access Journals (Sweden)

    Muhammad Atta

    2011-01-01

    Full Text Available The burn-up dependent steady-state thermal hydraulic analysis of Pakistan research reactor-1, reference operating core, has been carried out utilizing standard computer codes WIMS/D4, CITATION, and RELAP5/MOD3.4. Reactor codes WIMS/D4 and CITATION have been used for the calculations of neutronic parameters including peaking factors and power profiles at different burn-up considering a xenon free core and also the equilibrium xenon values. RELAP5/MOD3.4 code was utilized for the determination of peak fuel centerline, clad and coolant temperatures to ensure the safety of the reactor throughout the cycle. The calculations reveal that the reactor is safe and no nucleate boiling will commence at any part of the core throughout the cycle and that the safety margin increases with burnup as peaking factors decrease.

  15. Accelerated Gillespie Algorithm for Gas–Grain Reaction Network Simulations Using Quasi-steady-state Assumption

    Science.gov (United States)

    Chang, Qiang; Lu, Yang; Quan, Donghui

    2017-12-01

    Although the Gillespie algorithm is accurate in simulating gas–grain reaction networks, so far its computational cost is so expensive that it cannot be used to simulate chemical reaction networks that include molecular hydrogen accretion or the chemical evolution of protoplanetary disks. We present an accelerated Gillespie algorithm that is based on a quasi-steady-state assumption with the further approximation that the population distribution of transient species depends only on the accretion and desorption processes. The new algorithm is tested against a few reaction networks that are simulated by the regular Gillespie algorithm. We found that the less likely it is that transient species are formed and destroyed on grain surfaces, the more accurate the new method is. We also apply the new method to simulate reaction networks that include molecular hydrogen accretion. The results show that surface chemical reactions involving molecular hydrogen are not important for the production of surface species under standard physical conditions of dense molecular clouds.

  16. Non-existence of Steady State Equilibrium in the Neoclassical Growth Model with a Longevity Trend

    DEFF Research Database (Denmark)

    Hermansen, Mikkel Nørlem

    Longevity has been increasing in the developed countries for almost two centuries and further increases are expected in the future. In the neoclassical growth models the case of population growth driven by fertility is well-known, whereas the properties of population growth caused by persistently...... declining mortality rates have received little attention. Furthermore, the economic literature on the consequences of changing longevity has relied almost entirely on analysis applying a once and for all change in the survival probability. This paper raises concern about such an approach of comparison...... of steady state equilibrium when considering the empirically observed trend in longevity. We extend a standard continuous time overlapping generations model by a longevity trend and are thereby able to study the properties of mortality-driven population growth. This turns out to be exceedingly complicated...

  17. Application of piezodetectors for diagnostics of pulsed and quasi-steady-state plasma streams

    Energy Technology Data Exchange (ETDEWEB)

    Bandura, A.N.; Chebotarev, V.V.; Garkusha, I.E.; Tereshin, V.I.; Ladygina, M.S. [NSC KIPT, Kharkov (Ukraine). Inst. of Plasma Physics

    2006-04-15

    The paper reports on studies of the plasma streams generated by two experimental devices: the quasi-steady-state plasma accelerator (QSPA) Kh-50 and the pulsed plasma gun PROSVET. The radial distributions of the plasma pressure for different times and varied distances from the accelerator output have been used for investigation of the plasma stream dynamics and study the plasma compression in the focus region for different operational regimes of plasma accelerators. In experiments for the application of pulsed plasma streams for surface modification of different industrial steels, optimal regimes of surface processing have been chosen on the basis of the plasma pressure measurements. Examples of application of the piezodetectors in simulation experiments on plasma surface interaction under high heat loads are presented.

  18. Application of piezodetectors for diagnostics of pulsed and quasi-steady-state plasma streams

    Science.gov (United States)

    Bandura, A. N.; Chebotarev, V. V.; Garkusha, I. E.; Tereshin, V. I.; Ladygina, M. S.

    2006-04-01

    The paper reports on studies of the plasma streams generated by two experimental devices: the quasi-steady-state plasma accelerator (QSPA) Kh-50 and the pulsed plasma gun PROSVET. The radial distributions of the plasma pressure for different times and varied distances from the accelerator output have been used for investigation of the plasma stream dynamics and study the plasma compression in the focus region for different operational regimes of plasma accelerators. In experiments for the application of pulsed plasma streams for surface modification of different industrial steels, optimal regimes of surface processing have been chosen on the basis of the plasma pressure measurements. Examples of application of the piezodetectors in simulation experiments on plasma surface interaction under high heat loads are presented.

  19. Vitamin A metabolism: analysis of steady-state neutral metabolites in rat tissues.

    Science.gov (United States)

    Williams, J B; Pramanik, B C; Napoli, J L

    1984-06-01

    High-performance liquid chromatography systems were developed to rapidly separate retinol from its esters, analyze the total spectrum of neutral vitamin A compounds, and purify retinyl esters to homogeneity. Chemical ionization mass spectrometric techniques were used to identify vitamin A compounds; these techniques are also applicable to quantification of tissue vitamin A compounds. These methods provide rapid and sensitive techniques for separation and quantification of neutral retinol metabolites. Their utility was demonstrated by analysis of vitamin A metabolites in rat tissues under steady-state conditions. Tissue specificity was noted for the concentrations of retinol and its long-chain fatty acid esters, the ratio of retinol to retinyl esters, and the fatty acid composition of retinyl esters. Quantitatively minor amounts of several neutral polar retinol metabolites were detected, but neither 13-cis-retinol nor 4-hydroxyretinol was observed in vivo as metabolites of retinol in kidney.

  20. Over-And Understeer Behaviour Evaluation by Modelling Steady-State Cornering

    Directory of Open Access Journals (Sweden)

    Nikola Avramov

    2012-09-01

    Full Text Available This paper gives an overview of a vehicle cornering in a constant cornering radius, with constant speed. These constant values indicate steady state cornering or not changing its motion character over time. Even if the steering angle δ starting from ‘0’ (straight line driving is reaching the constant value or the constant cornering radius, the vehicle is not following the desired path or evident is the under-steer or over-steer condition. As presented we can see the vehicle cornering, and it’s offset from the neutral driven vehicle. The vehicle is driving trough corner with greater radius. This means that the vehicle is understeered. Neutral driven vehicle is the desired arc which can be followed by vehicle with neutral steer which means that when accelerating the driver doesn’t have to change the angle of the steering wheel.

  1. Steady State Structural Analysis of High Pressure Gas Turbine Blade using Finite Element Analysis

    Science.gov (United States)

    Mazarbhuiya, Hussain Mahamed Sahed Mostafa; Murari Pandey, Krishna

    2017-08-01

    In gas turbines the major portion of performance dependency lies upon turbine blade design. Turbine blades experience very high centrifugal, axial and tangential force during power generation. While withstanding these forces blades undergo elongation. Different methods have proposed for better enhancement of the mechanical properties of blade to withstand in extreme condition. Present paper describes the stress and elongation for blades having properties of different materials. Steady state structural analysis have performed in the present work for different materials (In 625, In 718, In 738, In 738 LC, MAR M246, Ni-Cr, Ti-alloy, Ti-Al, Ti-T6, U500). Remarkable finding is that the root of the blade is subjected to maximum stress for all blade materials and the blade made of MAR M246 has less stress and deformation among all other blade materials which can be selected as a suitable material for gas turbine blade.

  2. Steady state kinetic analysis of substrate specificity of glycoside hydrolases from families 13 and 38

    DEFF Research Database (Denmark)

    Nielsen, Jonas Willum

    Glycosidases are widespread in nature, where they perform a diverse range of functions. The glycoside hydrolase (GH) family 38, α-mannosidase II enzymes play a crucial role in mammalian cells, in the maturation of N-glycosylated proteins in the Golgi apparatus and in catabolism in cytosol...... been identified in various enzymes, often based on crystal structures, and only few have been characterized in terms of structure-function relationship. Together SBS1 and SBS2 of barley α-amylase isozyme 1 probably represent the two most extensively studied SBSs. SBS2, largely governed by Tyr380, has...... been shown to be important for AMY1 adhesion to starch granules, but seems to play no significant role in the degradation of oligosaccharides, and only a minor role in the degradation of amylose. In Manuscript 2, a steady state kinetic analysis of amylopectin depolymerization by AMY1 and the SBS2...

  3. The multispecies modeling of the premixed, laminar steady-state ozone flame

    Science.gov (United States)

    Heimerl, J. M.; Coffee, T. P.

    1980-01-01

    Species dependent kinetic, transport and thermodynamic coefficients were employed in a one dimensional model of the premixed, laminar, steady state ozone flame. Convenient expressions for these coefficients are reported. They are based on independent measurements, no arbitrary parameters are used. The governing equations are solved using a relaxation technique and the partial differential equation package, PDECOL. Species and temperature profiles and the burning velocities are found over the range of initial ozone mole fraction of 0.25 to 1.00. The computed burning velocities are no more than 30% greater than the measurements of Streng and Grosses. Comparison with the computed results of Warnatz shows agreement within + or - 12%, even though quite different expressions for some of the kinetic coefficients were used. These differences are most obvious in the atomic oxygen and temperature profiles at an initial ozone mole fraction of unity.

  4. Influence of non-steady state during isoglycemic hyperinsulinemic clamp in hypertension. A LIFE substudy

    DEFF Research Database (Denmark)

    Olsen, M H; Andersen, U B; Wachtell, K

    1999-01-01

    We wanted to investigate whether time to steady state was reached within 2 h of insulin infusion during isoglycemic hyperinsulinemic clamp, comparing the glucose uptake index (M/IG) with Bergman's insulin sensitivity index (Sip). We performed a 2-h oral glucose tolerance test and a 3-h isoglycemic...... hyperinsulinemic clamp in 26 young, healthy subjects and 43 elderly patients with unmedicated essential hypertension and left ventricular hypertrophy. The 3-h Sip correlated strongly with the 2-h M/IG in the patients (r = 0.88, p ... narrow limits of agreement in the patients. However, during the third hour of insulin infusion, M/IG (10.0 vs 12.21(2) x kg(-1) x min(-1) x mmol(-1), p Sip (7.1 vs 9.41(2) x kg(-1) x min(-1) x mmol(-1), p

  5. Steady-state heat losses in pipes for low-energy district heating

    DEFF Research Database (Denmark)

    Dalla Rosa, Alessandro; Li, Hongwei; Svendsen, Svend

    2010-01-01

    of low-energy DH systems. Various design concepts are considered in this paper: flexible pre-insulated twin pipes with symmetrical or asymmetrical insulation, double pipes, triple pipes. These technologies are potentially energyefficient and cost-effective solutions for DH networks in low-heat density...... areas. We start with a review of theories and methods for steady-state heat loss calculation. Next, the article shows how detailed calculations with 2D-modeling of pipes can be carried out by means of computer software based on the finite element method (FEM). The model was validated by comparison....... Finally, the article describes proposals for the optimal design of pipes for low-energy applications and presents methods for decreasing heat losses....

  6. Steady State Analysis Of The Variable Speed Switched Reluctance Motor Drive

    Science.gov (United States)

    Materu, P.; Krishnan, R.; Farzanehfard, H.

    1987-10-01

    The switched reluctance motor (SRM) drive has recently received attention mainly because of its simple motor construction and unidirectional converter requirement. The principle of operation of the motor drive demands that the motor and converter be treated as one unit. Little has been done to develop a complete analysis of this motor-converter combination 1'2. This paper presents an approach to the steady state analysis of the SRM drive including the effects of stator winding resistance, input filter dynamics and snubber circuits which are often neglected. The analysis yields phase current waveforms providing guidelines to the optimal design of the converter and motor. A novel single-switch-per phase converter developed by one of the authors is used. The approach can be used for any other motor-converter combination.

  7. Transient and Steady-State Analysis of Nonlinear RF and Microwave Circuits

    Directory of Open Access Journals (Sweden)

    2006-01-01

    Full Text Available This paper offers a review of simulation methods currently available for the transient and steady-state analysis of nonlinear RF and microwave circuits. The most general method continues to be the time-marching approach used in Spice, but more recent methods based on multiple time dimensions are particularly effective for RF and microwave circuits. We derive nodal formulations for the most widely used multiple time dimension methods. We put special emphasis on methods for the analysis of oscillators based in the warped multitime partial differential equations (WaMPDE approach. Case studies of a Colpitts oscillator and a voltage controlled Clapp-Gouriet oscillator are presented and discussed. The accuracy of the amplitude and phase of these methods is investigated. It is shown that the exploitation of frequency-domain latency reduces the computational effort.

  8. The pump and leak steady-state concept with a variety of regulated leak pathways

    DEFF Research Database (Denmark)

    Hoffmann, E K

    2001-01-01

    The paper will reflect on how Ussing has affected my own scientific work and how he created much of the framework within which I have been working. I have used five examples: (i) The first description of a 1:1 exchange diffusion was introduced by Ussing in 1947 and has been found to be of great....... This had a major influence on my later description of a swelling-activated Cl- conductance. (ii) The pump-leak steady-state concept for cell volume control was introduced by Krogh in 1946, but it was developed in detail by Leaf and Ussing in 1959. This concept was the basis for me and others, when we later...... to study ion transport across epithelia. A few results on Cl- transport across the operculum epithelium of the small eurohaline fish Fundulus heteroclitus mounted in small Ussing chambers are presented. (v) Shrinkage-activated Na+ conductance and its possible role in isotonic secretion in frog skin glands...

  9. Computation of Effective Steady-State Creep of Porous Ni–YSZ Composites with Reconstructed Microstructures

    DEFF Research Database (Denmark)

    Kwok, Kawai; Jørgensen, Peter Stanley; Frandsen, Henrik Lund

    2015-01-01

    This paper investigates the effective steady-state creep response of porous Ni–YSZ composites used in solid oxide fuel cell applications by numerical homogenization based on three-dimensional microstructural reconstructions and steadystate creep properties of the constituent phases. The Ni phase...... is found to carry insignificant stress in the composite and has a negligible role in the effective creep behavior. Thus, when determining effective creep, porous Ni–YSZ composites can be regarded as porous YSZ in which the Ni phase is counted as additional porosity. The stress exponents of porous YSZ...... are the same as that of dense YSZ, but the effective creep rate increases by a factor of 8–10 due to porosity. The relationship of creep rate and volume fraction of YSZ computed by numerical homogenization is underestimated by most existing analytical models. The Ramakrishnan–Arunchalam creep model provides...

  10. Analytical modeling of the steady state ablation of a 3D C/C composite

    Energy Technology Data Exchange (ETDEWEB)

    Lachaud, J.; Aspa, Y.; Vignoles, G.L. [Universite Bordeaux 1, Laboratoire des Composites ThermoStructuraux (LCTS), 33 - Pessac (France); Aspa, Y. [Institut de Mecanique des Fluides de Toulouse (IMFT), 31 - Toulouse (France)

    2008-05-15

    Following an analysis of surface roughness features that develop on a 3D C/C composite during ablation, i.e. wall recession by oxidation and/or sublimation, a modeling strategy is set up in order to predict the composite behavior from that of its components. It relies on two changes of scale: (i) microscopic scale (fiber, matrix) to mesoscopic scale (bundle) and (ii) mesoscopic scale (bundle, matrix) to macroscopic scale (composite). The physical basis is a general model for receding surfaces under a gasification process coupled to mass transfer. At each scale, the 3D surface equation is analytically solved in steady state considering a 1-D mass transfer perpendicular to the overall surface. The models are validated by comparison to experimental data. (authors)

  11. Enhancement in Steady State and Dynamic Performance of Direct Torque Control Induction Motor Drive

    Science.gov (United States)

    Singh, Bhoopendra; Jain, Shailendra; Dwivedi, Sanjeet

    2013-09-01

    An enhancement in dynamic performance of a traditional DTC drive can be achieved by a robust speed control algorithm while the steady state performance depends upon the switching strategy selected for minimization of torque ripples and an efficient flux control loop. In this paper a new torque ripple reduction technique with a modified look up table incorporating a larger number of synthesized non zero active voltage vectors is utilized to overcome the limitations of the conventionally controlled DTC drive. A fuzzy logic based speed controller and a low pass filter with tunable cutoff frequency for flux estimation is proposed in this paper. The proposed study is investigated through simulation and experimentally validated on a test drive.

  12. Analysis of Steady-State Error in Torque Current Component Control of PMSM Drive

    Directory of Open Access Journals (Sweden)

    BRANDSTETTER, P.

    2017-05-01

    Full Text Available The paper presents dynamic properties of a vector controlled permanent magnet synchronous motor drive supplied by a voltage source inverter. The paper deals with a control loop for the torque producing stator current. There is shown fundamental mathematical description for the vector control structure of the permanent magnet synchronous motor drive with respect to the current control for d-axis and q-axis of the rotor rotating coordinate system. The derivations of steady-state deviation for schemes with and without decoupling circuits are described for q-axis. The properties of both schemes are verified by MATLAB-SIMULINK program considering a lower and a higher value of inertia and by experimental measurements in our laboratory. The simulation and experimental results are presented and discussed at the end of the paper.

  13. Erratum to: Study on Chloride Ion Penetration Resistance of Rubberized Concrete Under Steady State Condition

    Directory of Open Access Journals (Sweden)

    Md Noor Nurazuwa

    2016-01-01

    In this paper, the effect of crumb rubber, CR as fine aggregate in the concrete to enhance concrete durability against chloride ion diffusion was studied. Chloride ion diffusion in rubberized concrete was tested by migration test under steady state condition. Concrete specimen with water-to-cement ratio of 0.50 was prepared to study the CR effectiveness in comparison with lower water-to-cement ratio. In addition, 10% silica fume, SF was added to provide denser concrete and to understand its effectiveness against chloride ion diffusion. Results showed that chloride transport characteristics were improved by the increasing amount of CR in all mixed due to the fact that CR has the ability to repel water. Meanwhile, rubberized concrete with w/c = 0.35 gave better resistance against chloride ion penetration compared to w/c = 0.50. This was much improved with combination of CR and SF.

  14. Steady State Transportation Cooling in Porous Media Under Local, Non-Thermal Equilibrium Fluid Flow

    Science.gov (United States)

    Rodriquez, Alvaro Che

    2002-01-01

    An analytical solution to the steady-state fluid temperature for 1-D (one dimensional) transpiration cooling has been derived. Transpiration cooling has potential use in the aerospace industry for protection against high heating environments for re-entry vehicles. Literature for analytical treatments of transpiration cooling has been largely confined to the assumption of thermal equilibrium between the porous matrix and fluid. In the present analysis, the fundamental fluid and matrix equations are coupled through a volumetric heat transfer coefficient and investigated in non-thermal equilibrium. The effects of varying the thermal conductivity of the solid matrix and the heat transfer coefficient are investigated. The results are also compared to existing experimental data.

  15. Steady-state, elastic-plastic growth of slanted cracks in symmetrically loaded plates

    DEFF Research Database (Denmark)

    Nielsen, Kim Lau; Hutchinson, J. W.

    2017-01-01

    Elastic and elastic-plastic results are obtained for a semi-infinite slanted through-crack propagating in a symmetrically loaded plate strip with the aim of providing theoretical background to commonly observed plate tearing behavior. Were it is not for the slant of the crack through the thickness...... of the plate, the problem would be mode I, but due to the slant the local conditions along the crack front are a combination of mode I and mode III. A three-dimensional formulation for steady-state crack propagation is employed to generate distributions of effective stress, stress triaxiality and Lode...... parameter through the plate in the plastic zone at the crack tip. The distribution of the mode I and mode III stress intensity factors along the crack front are obtained for the elastic problem. The out-of-plane bending constraint imposed on the plate significantly influences the mixed mode behavior along...

  16. Steady State Investigations of DPF Soot Burn Rates and DPF Modeling

    DEFF Research Database (Denmark)

    Cordtz, Rasmus Lage; Ivarsson, Anders; Schramm, Jesper

    2011-01-01

    experiments where the DPF is exposed to real engine exhaust gas in a test bed. The DPF is a silicon carbide filter of the wall flow type without a catalytic coating. A key task concerning the DPF model calibration is to perform accurate DPF experiments because measured gas concentrations, temperatures......This work presents the experimental investigation of Diesel Particulate Filter (DPF) regeneration and a calibration procedure of a 1D DPF simulation model based on the commercial software AVL BOOST v. 5.1. Model constants and parameters are fitted on the basis of a number of steady state DPF...... mass of a sample gas continuously extracted from the engine exhaust pipe for 1-2 hours while also measuring the gas flow passed through the filter. A small silicon carbide wall flow DPF protected in a sealed stainless steel filter housing is used as sample filter. Measured DPF pressure drop...

  17. Motion of the seawater interface in a coastal aquifer by the method of successive steady states

    Science.gov (United States)

    Bear, J.; Shamir, U.; Gamliel, A.; Shapiro, A. M.

    1985-01-01

    The paper describes a method for determining the motion of the seawater interface in a phreatic coastal aquifer during a specified time period in response to changing hydrologic conditions, provided a seaward flow of fresh water is maintained everywhere above the interface. The method of successive steady states is used, leading to an approximate analytical expression which gives the motion of the interface toe during the time period as a function of the initial conditions and the change in freshwater flow to the sea above the toe during the time period. Sensitivity of the results to values of parameters and to hydrologic conditions is investigated, and the results are compared with those obtained by other methods of analysis. The motivation for developing the approximate analytical expression for movement of the interface was to facilitate the introduction of seawater intrusion as a criterion in the multiobjective management model for coastal aquifers.

  18. Phononic heat transport in nanomechanical structures: steady-state and pumping

    Science.gov (United States)

    Sena-Junior, Marcone I.; Lima, Leandro R. F.; Lewenkopf, Caio H.

    2017-10-01

    We study the heat transport due to phonons in nanomechanical structures using a phase space representation of non-equilibrium Green’s functions. This representation accounts for the atomic degrees of freedom making it particularly suited for the description of small (molecular) junctions systems. We rigorously show that for the steady state limit our formalism correctly recovers the heuristic Landauer-like heat conductance for a quantum coherent molecular system coupled to thermal reservoirs. We find general expressions for the non-stationary heat current due to an external periodic drive. In both cases we discuss the quantum thermodynamic properties of the systems. We apply our formalism to the case of a diatomic molecular junction.

  19. Steady State Visual Evoked Potential Based Brain-Computer Interface for Cognitive Assessment

    DEFF Research Database (Denmark)

    Westergren, Nicolai; Bendtsen, Rasmus L.; Kjær, Troels W.

    2016-01-01

    decline is important. Cognitive decline may be detected using fullyautomated computerized assessment. Such systems will provide inexpensive and widely available screenings of cognitive ability. The aim of this pilot study is to develop a real time steady state visual evoked potential (SSVEP) based brain-computer...... interface (BCI) for neurological cognitive assessment. It is intended for use by patients who suffer from diseases impairing their motor skills, but are still able to control their gaze. Results are based on 11 healthy test subjects. The system performance have an average accuracy of 100% ± 0%. The test...... subjects achieved an information transfer rate (ITR) of 14:64 bits/min ± 7:63 bits=min and a subject test performance of 47:22% ± 34:10%. This study suggests that BCI may be applicable in practice as a computerized cognitive assessment tool. However, many improvements are required for the system...

  20. Steady-State Microbunching in a Storage Ring for Generating Coherent Radiation

    Energy Technology Data Exchange (ETDEWEB)

    Ratner, Daniel F.; /Stanford U., Appl. Phys. Dept.; Chao, Alexander W.; /SLAC

    2011-05-19

    Synchrotrons and storage rings deliver radiation across the electromagnetic spectrum at high repetition rates, and free electron lasers (FELs) produce radiation pulses with high peak brightness. However, at present few light sources can generate both high repetition rate and high brightness outside the optical range. We propose to create steady-state microbunching (SSMB) in a storage ring to produce coherent radiation at a high repetition rate or in continuous wave (CW) mode. In this paper we describe a general mechanism for producing SSMB and give sample parameters for EUV lithography and sub-millimeter sources. We also describe a similar arrangement to produce two pulses with variable spacing for pump-probe experiments. With technological advances, SSMB could reach the soft X-ray range (< 10 nm).

  1. Effects of spatial diffusion on nonequilibrium steady states in a model for prebiotic evolution

    Science.gov (United States)

    Intoy, B. F.; Wynveen, A.; Halley, J. W.

    2016-10-01

    Effects of spatial diffusion in a Kauffman-like model for prebiotic evolution previously studied in a "well-mixed" limit are reported. The previous model was parametrized by a parameter p defined as the probability that a possible reaction in a network of reactions characterizing the artificial chemistry actually appears in the chemical network. In the model reported here, we numerically study a grid of such well-mixed reactors on a two-dimensional spatial lattice in which the model chemical constituents can hop between neighboring reactors at a rate controlled by a second parameter η . We report the frequency of appearance of three distinct types of nonequilibrium steady states, characterized as "diffusively alive locally dead" (DALD), "diffusively dead locally alive" (DDLA) and "diffusively alive locally alive" (DALA). The types are defined according to whether they are chemically equilibrated at each site, diffusively equilibrated between sites, or neither, respectively. With our parametrization of the definitions of these nonequilibrium states, many of the DALA states are growing rapidly in population due to the explosive population growth of a few sites, while their entropy remains well below its equilibrium value. Sharp temporal transitions occur as exploding sites appear. DALD states occur less commonly than the other types and also usually harbor a few explosively growing sites but transitions are less sharp than in DALA systems.

  2. Steady-state energy balance in animal models of obesity and weight loss.

    Science.gov (United States)

    Olsen, Magnus Kringstad; Johannessen, Helene; Cassie, Nikki; Barrett, Perry; Takeuchi, Koji; Kulseng, Bård; Chen, Duan; Zhao, Chun-Mei

    2017-04-01

    We wanted to exam the steady-state energy balance by using high-fat diet-induced obese (DIO) rats and mice as models for positive energy balance, and gastric bypassed (GB) rats and gene knockout of muscarinic acetylcholine M3 receptor (M3KO) mice as models for negative energy balance. One hundred and thirty-two rats and mice were used. Energy balance was measured by a comprehensive laboratory animal monitoring system. Gene expression was analysed by in situ hybridisation in M3KO mice. DIO rats reached the plateau of body weight 28 weeks after starting high-fat diet (25% heavier than controls), whereas DIO mice reached the plateau after 6 weeks (23% heavier than controls). At the plateau, DIO rats had higher calorie intake during the light phase but not during the dark phase, while mice had the same calorie intake per day as controls. DIO rats and mice had lower energy expenditure (EE) and respiratory exchange ratio (RER) than controls. GB-rats reached the plateau (15% weight loss) 2 weeks after surgery and had the same calorie intake as sham-operated controls. EE, but not RER, was higher in GB rats than controls during the dark phase. The lean M3KO mice (25% lighter than wild-type (WT) mice at the plateau between 6 and 15 months of age) had the same calorie intake but higher EE, RER and hypothalamic mRNA expression of NPY, AgRP and leptin receptor than WT mice. When body weight gain or loss reached a plateau, the steady-state energy balance was mainly maintained by EE and/or RER rather than calorie intake.

  3. Transient and steady state creep response of ice I and magnesium sulfate hydrate eutectic aggregates

    Science.gov (United States)

    McCarthy, C.; Cooper, R.F.; Goldsby, D.L.; Durham, W.B.; Kirby, S.H.

    2011-01-01

    Using uniaxial compression creep experiments, we characterized the transient and steady state deformation behaviors of eutectic aggregates of system ice I and MgSO4 11H2O (MS11; meridianiite), which has significance because of its likely presence on moons of the outer solar system. Synthetic samples of eutectic liquid bulk composition, which produce eutectic colonies containing 0.35-0.50 volume fraction MS11, were tested as functions of colony size and lamellar spacing, temperature (230-250 K), and confining pressure (0.1 and 50 MPa) to strains ???0.2. Up to a differential stress of 6 MPa, the ice I-MS11 aggregates display an order of magnitude higher effective viscosity and higher stress sensitivity than do aggregates of pure polycrystalline ice at the same conditions. The creep data and associated microstructural observations demonstrate, however, that the aggregates are additionally more brittle than pure ice, approaching rate-independent plasticity that includes rupture of the hydrate phase at 6-8 MPa, depending on the scale of the microstructure. Microstructures of deformed samples reveal forms of semibrittle flow in which the hydrate phase fractures while the ice phase deforms plastically. Semibrittle flow in the icy shell of a planetary body would truncate the lithospheric strength envelope and thereby decrease the depth to the brittle-ductile transition by 55% and reduce the failure limit for compressional surface features from 10 to ???6 MPa. A constitutive equation that includes eutectic colony boundary sliding and intracolony flow is used to describe the steady state rheology of the eutectic aggregates. Copyright ?? 2011 by the American Geophysical Union.

  4. Full-field inspection of three-dimensional structures using steady-state acoustic wavenumber spectroscopy

    Science.gov (United States)

    Koskelo, Elise Anne C.; Flynn, Eric B.

    2017-02-01

    Inspection of and around joints, beams, and other three-dimensional structures is integral to practical nondestructive evaluation of large structures. Non-contact, scanning laser ultrasound techniques offer an automated means of physically accessing these regions. However, to realize the benefits of laser-scanning techniques, simultaneous inspection of multiple surfaces at different orientations to the scanner must not significantly degrade the signal level nor diminish the ability to distinguish defects from healthy geometric features. In this study, we evaluated the implementation of acoustic wavenumber spectroscopy for inspecting metal joints and crossbeams from interior angles. With this technique, we used a single-tone, steady-state, ultrasonic excitation to excite the joints via a single transducer attached to one surface. We then measured the full-field velocity responses using a scanning Laser Doppler vibrometer and produced maps of local wavenumber estimates. With the high signal level associated with steady-state excitation, scans could be performed at surface orientations of up to 45 degrees. We applied camera perspective projection transformations to remove the distortion in the scans due to a known projection angle, leading to a significant improvement in the local estimates of wavenumber. Projection leads to asymmetrical distortion in the wavenumber in one direction, making it possible to estimate view angle even when neither it nor the nominal wavenumber is known. Since plate thinning produces a purely symmetric increase in wavenumber, it also possible to independently estimate the degree of hidden corrosion. With a two-surface joint, using the wavenumber estimate maps, we were able to automatically calculate the orthographic projection component of each angled surface in the scan area.

  5. Nonconstant Positive Steady States and Pattern Formation of 1D Prey-Taxis Systems

    Science.gov (United States)

    Wang, Qi; Song, Yang; Shao, Lingjie

    2017-02-01

    Prey-taxis is the process that predators move preferentially toward patches with highest density of prey. It is well known to have an important role in biological control and the maintenance of biodiversity. To model the coexistence and spatial distributions of predator and prey species, this paper concerns nonconstant positive steady states of a wide class of prey-taxis systems with general functional responses over 1D domain. Linearized stability of the positive equilibrium is analyzed to show that prey-taxis destabilizes prey-predator homogeneity when prey repulsion (e.g., due to volume-filling effect in predator species or group defense in prey species) is present, and prey-taxis stabilizes the homogeneity otherwise. Then, we investigate the existence and stability of nonconstant positive steady states to the system through rigorous bifurcation analysis. Moreover, we provide detailed and thorough calculations to determine properties such as pitchfork and turning direction of the local branches. Our stability results also provide a stable wave mode selection mechanism for thee reaction-advection-diffusion systems including prey-taxis models considered in this paper. Finally, we provide numerical studies of prey-taxis systems with Holling-Tanner kinetics to illustrate and support our theoretical findings. Our numerical simulations demonstrate that the 2× 2 prey-taxis system is able to model the formation and evolution of various striking patterns, such as spikes, periodic oscillations, and coarsening even when the domain is one-dimensional. These dynamics can model the coexistence and spatial distributions of interacting prey and predator species. We also give some insights on how system parameters influence pattern formation in these models.

  6. Bioavailability of two manufacturers' sustained-release quinidine gluconate tablets at steady state.

    Science.gov (United States)

    Zinny, M A; Taggart, W V

    1984-01-01

    Steady-state bioavailability of sustained-release quinidine gluconate tablets manufactured by two companies was compared in a crossover study. The tablets were Quinaglute Dura-Tabs, manufactured by Berlex Laboratories, Inc., and generic quinidine gluconate tablets, manufactured by Bolar Pharmaceutical Company. Sixteen healthy male volunteers were given multiple doses of the two products in randomized sequence. Blood samples were obtained immediately before administration of the seventh dose (hour 72) and at 1, 2, 3, 4, 5, 6, 8, 10, and 12 hours after administration. Plasma samples were assayed for quinidine content by high-performance liquid chromatography. The tablets manufactured by Berlex provided statistically significantly higher plasma levels during the second half of the dosing interval (six to 12 hours postdose). A 29% difference in plasma levels was observed between the products at the end of the dosing interval. The Bolar quinidine gluconate tablets had a statistically significant lower area under the curve (AUC). The greatest difference in AUC occurred during the last six hours of the dosing period. The six- to 12-hour AUC for the Bolar tablets was 24% less than that for Berlex tablets. The generic tablets also achieved peak plasma level 31% sooner than did Quinaglute Dura-Tabs. The pharmacokinetic characteristics of the two products at steady state indicate that the Bolar quinidine gluconate tablet exhibited a more rapid onset of peak plasma levels and a more rapid decline to minimum plasma levels. In summary, the data from this multiple-dose study, performed using commercially available material, indicate that differences exist in pharmacokinetic performance of the products. However, the exact correlation between pharmacokinetic data and clinical effectiveness has not been established.

  7. Comparison of Glucose Monitoring Methods during Steady-State Exercise in Women

    Directory of Open Access Journals (Sweden)

    Kelly L. Pritchett

    2012-09-01

    Full Text Available Data from Continuous Glucose Monitoring (CGM systems may help improve overall daily glycemia; however, the accuracy of CGM during exercise remains questionable. The objective of this single group experimental study was to compare CGM-estimated values to venous plasma glucose (VPG and capillary plasma glucose (CPG during steady-state exercise. Twelve recreationally active females without diabetes (aged 21.8 ± 2.4 years, from Central Washington University completed the study. CGM is used by individuals with diabetes, however the purpose of this study was to first validate the use of this device during exercise for anyone. Data were collected between November 2009 and April 2010. Participants performed two identical 45-min steady-state cycling trials (~60% Pmax on non-consecutive days. Glucose concentrations (CGM-estimated, VPG, and CPG values were measured every 5 min. Two carbohydrate gel supplements along with 360 mL of water were consumed 15 min into exercise. A product-moment correlation was used to assess the relationship and a Bland-Altman analysis determined error between the three glucose measurement methods. It was found that the CGM system overestimated mean VPG (mean absolute difference 17.4 mg/dL (0.97 mmol/L and mean CPG (mean absolute difference 15.5 mg/dL (0.86 mmol/L. Bland-Altman analysis displayed wide limits of agreement (95% confidence interval of 44.3 mg/dL (2.46 mmol/L (VPG compared with CGM and 41.2 mg/dL (2.29 mmol/L (CPG compared with CGM. Results from the current study support that data from CGM did not meet accuracy standards from the 15197 International Organization for Standardization (ISO.

  8. The relationship between skin aging and steady state ultraweak photon emission as an indicator of skin oxidative stress in vivo.

    Science.gov (United States)

    Gabe, Y; Osanai, O; Takema, Y

    2014-08-01

    Ultraweak photon emission (UPE) is one potential method to evaluate the oxidative status of the skin in vivo. However, little is known about how the daily oxidative stress of the skin is related to skin aging-related alterations in vivo. We characterized the steady state UPE and performed a skin survey. We evaluated the skin oxidative status by UPE, skin elasticity, epidermal thickness and skin color on the inner upper arm, the outer forearm, and the buttock of 70 Japanese volunteers. The steady state UPE at the three skin sites increased with age. Correlation analysis revealed that the steady state UPE only from the buttock was related to skin elasticity, which showed age-dependent changes. Moreover, analysis by age group indicated that b* values of the inner upper arm of subjects in their 20s were inversely correlated with UPE as occurred in buttock skin. In contrast, photoaged skin did not show a clear relationship with steady state UPE because the accumulation of sun-exposure might influence the sensitivity to oxidative stress. These results suggest that steady state UPE reflects not only intrinsic skin aging and cutaneous color but also the current oxidative status independent of skin aging. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  9. Consistent spectral predictors for dynamic causal models of steady-state responses.

    Science.gov (United States)

    Moran, Rosalyn J; Stephan, Klaas E; Dolan, Raymond J; Friston, Karl J

    2011-04-15

    Dynamic causal modelling (DCM) for steady-state responses (SSR) is a framework for inferring the mechanisms that underlie observed electrophysiological spectra, using biologically plausible generative models of neuronal dynamics. In this paper, we examine the dynamic repertoires of nonlinear conductance-based neural population models and propose a generative model of their power spectra. Our model comprises an ensemble of interconnected excitatory and inhibitory cells, where synaptic currents are mediated by fast, glutamatergic and GABAergic receptors and slower voltage-gated NMDA receptors. We explore two formulations of how hidden neuronal states (depolarisation and conductances) interact: through their mean and variance (mean-field model) or through their mean alone (neural-mass model). Both rest on a nonlinear Fokker-Planck description of population dynamics, which can exhibit bifurcations (phase transitions). We first characterise these phase transitions numerically: by varying critical model parameters, we elicit both fixed points and quasiperiodic dynamics that reproduce the spectral characteristics (~2-100 Hz) of real electrophysiological data. We then introduce a predictor of spectral activity using centre manifold theory and linear stability analysis. This predictor is based on sampling the system's Jacobian over the orbits of hidden neuronal states. This predictor behaves consistently and smoothly in the region of phase transitions, which permits the use of gradient descent methods for model inversion. We demonstrate this by inverting generative models (DCMs) of SSRs, using simulated data that entails phase transitions. Copyright © 2011 Elsevier Inc. All rights reserved.

  10. Numerical analysis of Markov-perfect equilibria with multiple stable steady states : A duopoly application with innovative firms

    NARCIS (Netherlands)

    Dawid, H.; Keoula, M.Y.; Kort, Peter

    2017-01-01

    This paper presents a numerical method for the characterization of Markov-perfect equilibria of symmetric differential games exhibiting coexisting stable steady states. The method relying on the calculation of ‘local value functions’ through collocation in overlapping parts of the state space, is

  11. Quantification of the memory effect of steady-state currents from interaction-induced transport in quantum systems

    Science.gov (United States)

    Lai, Chen-Yen; Chien, Chih-Chun

    2017-09-01

    Dynamics of a system in general depends on its initial state and how the system is driven, but in many-body systems the memory is usually averaged out during evolution. Here, interacting quantum systems without external relaxations are shown to retain long-time memory effects in steady states. To identify memory effects, we first show quasi-steady-state currents form in finite, isolated Bose- and Fermi-Hubbard models driven by interaction imbalance and they become steady-state currents in the thermodynamic limit. By comparing the steady-state currents from different initial states or ramping rates of the imbalance, long-time memory effects can be quantified. While the memory effects of initial states are more ubiquitous, the memory effects of switching protocols are mostly visible in interaction-induced transport in lattices. Our simulations suggest that the systems enter a regime governed by a generalized Fick's law and memory effects lead to initial-state-dependent diffusion coefficients. We also identify conditions for enhancing memory effects and discuss possible experimental implications.

  12. Advancing the detection of steady-state visual evoked potentials in brain-computer interfaces

    Science.gov (United States)

    Abu-Alqumsan, Mohammad; Peer, Angelika

    2016-06-01

    Objective. Spatial filtering has proved to be a powerful pre-processing step in detection of steady-state visual evoked potentials and boosted typical detection rates both in offline analysis and online SSVEP-based brain-computer interface applications. State-of-the-art detection methods and the spatial filters used thereby share many common foundations as they all build upon the second order statistics of the acquired Electroencephalographic (EEG) data, that is, its spatial autocovariance and cross-covariance with what is assumed to be a pure SSVEP response. The present study aims at highlighting the similarities and differences between these methods. Approach. We consider the canonical correlation analysis (CCA) method as a basis for the theoretical and empirical (with real EEG data) analysis of the state-of-the-art detection methods and the spatial filters used thereby. We build upon the findings of this analysis and prior research and propose a new detection method (CVARS) that combines the power of the canonical variates and that of the autoregressive spectral analysis in estimating the signal and noise power levels. Main results. We found that the multivariate synchronization index method and the maximum contrast combination method are variations of the CCA method. All three methods were found to provide relatively unreliable detections in low signal-to-noise ratio (SNR) regimes. CVARS and the minimum energy combination methods were found to provide better estimates for different SNR levels. Significance. Our theoretical and empirical results demonstrate that the proposed CVARS method outperforms other state-of-the-art detection methods when used in an unsupervised fashion. Furthermore, when used in a supervised fashion, a linear classifier learned from a short training session is able to estimate the hidden user intention, including the idle state (when the user is not attending to any stimulus), rapidly, accurately and reliably.

  13. On the relation between steady-state currents and resonance states in molecular junctions

    Energy Technology Data Exchange (ETDEWEB)

    Toroker, Maytal Caspary; Peskin, Uri [Schulich Faculty of Chemistry and Lise Meitner Center for Computational Quantum Chemistry, Technion-Israel Institute of Technology, Haifa 32000 (Israel)], E-mail: uri@techunix.technion.ac.il

    2009-02-28

    The correlation between the current through a molecular junction and the decay rates of specific resonance states of the molecular conductor is analysed for different molecule-electrodes coupling strengths. Three transport regimes are identified for linear conductors. In the weak coupling regime the current is proportional to the sum of resonance widths and increases with increasing coupling. As the coupling strength increases, the current saturates and the transport becomes 'Ohmic-like', i.e. increases linearly with the voltage. In the strong coupling regime the current decreases with the coupling strength. This decrease is associated with a bifurcation of the conductor resonances into narrow (long-lived) ones which dominate the transmission and broad ones which are associated with the formation of localized molecular states at the electrodes interfaces. We show that the nature of the transport is determined by a dimensionless parameter which measures the degree of resonance overlap in the system.

  14. The effects of intrinsic noise on the behaviour of bistable cell regulatory systems under quasi-steady state conditions

    CERN Document Server

    de la Cruz, Roberto; Spill, Fabian; Alarcón, Tomás

    2015-01-01

    We analyse the effect of intrinsic fluctuations on the properties of bistable stochastic systems with time scale separation operating under1 quasi-steady state conditions. We first formulate a stochastic generalisation of the quasi-steady state approximation based on the semi-classical approximation of the partial differential equation for the generating function associated with the Chemical Master Equation. Such approximation proceeds by optimising an action functional whose associated set of Euler-Lagrange (Hamilton) equations provide the most likely fluctuation path. We show that, under appropriate conditions granting time scale separation, the Hamiltonian can be re-scaled so that the set of Hamilton equations splits up into slow and fast variables, whereby the quasi-steady state approximation can be applied. We analyse two particular examples of systems whose mean-field limit has been shown to exhibit bi-stability: an enzyme-catalysed system of two mutually-inhibitory proteins and a gene regulatory circui...

  15. Evolution to a steady state for a rarefied gas flowing from a tank into a vacuum through a plane channel

    Science.gov (United States)

    Konopel'ko, N. A.; Shakhov, E. M.

    2017-10-01

    A kinetic equation (S-model) is used to solve the nonstationary problem of a monatomic rarefied gas flowing from a tank of infinite capacity into a vacuum through a long plane channel. Initially, the gas is at rest and is separated from the vacuum by a barrier. The temperature of the channel walls is kept constant. The flow is found to evolve to a steady state. The time required for reaching a steady state is examined depending on the channel length and the degree of gas rarefaction. The kinetic equation is solved numerically by applying a conservative explicit finite-difference scheme that is firstorder accurate in time and second-order accurate in space. An approximate law is proposed for the asymptotic behavior of the solution at long times when the evolution to a steady state becomes a diffusion process.

  16. Steady-State Dynamics and Effective Temperature for a Model of Quantum Criticality in an Open System.

    Science.gov (United States)

    Ribeiro, P; Zamani, F; Kirchner, S

    2015-11-27

    We study the thermal and nonthermal steady-state scaling functions and the steady-state dynamics of a model of local quantum criticality. The model we consider, i.e., the pseudogap Kondo model, allows us to study the concept of effective temperatures near fully interacting as well as weak-coupling fixed points. In the vicinity of each fixed point we establish the existence of an effective temperature-different at each fixed point-such that the equilibrium fluctuation-dissipation theorem is recovered. Most notably, steady-state scaling functions in terms of the effective temperatures coincide with the equilibrium scaling functions. This result extends to higher correlation functions as is explicitly demonstrated for the Kondo singlet strength. The nonlinear charge transport is also studied and analyzed in terms of the effective temperature.

  17. The Stability of the Steady State and Bistable Response of a Flexible Rotor Supported on Squeeze Film Dampers

    Science.gov (United States)

    Meng, Guang

    1991-01-01

    The stability of the steady state response, the bistable response, and the jumping characteristics are analyzed for the case when a system accelerates or decelerates through the bistable region of a flexible rotor-centralized squeeze film damper system. It was found that the system steady state responses have two unstable regions. The larger the unbalance parameter and the smaller the bearing parameter and the external damping ratio, the easier it is for the system to lose stability. The larger the mass ratio and the smaller the stiffness ratio, the lower the threshold rotating speed of instability. The instability of the system steady-state response determined here is due to the system nonsynchronous response in many cases.

  18. The effect of solute additions on the steady-state creep behavior of dispersion-strengthened aluminum.

    Science.gov (United States)

    Reynolds, G. H.; Lenel, F. V.; Ansell, G. S.

    1971-01-01

    The effect of solute additions on the steady-state creep behavior of coarse-grained dispersion-strengthened aluminum alloys was studied. Recrystallized dispersion-strengthened solid solutions were found to have stress and temperature sensitivities quite unlike those observed in single-phase solid solutions having the same composition and grain size. The addition of magnesium or copper to the matrix of a recrystallized dispersion-strengthened aluminum causes a decrease in the steady-state creep rate which is much smaller than that caused by similar amounts of solute in single-phase solid solutions. All alloys exhibited essentially a 4.0 power stress exponent in agreement with the model of Ansell and Weertman. The activation energy for steady-state creep in dispersion-strengthened Al-Mg alloys, as well as the stress dependence, was in agreement with the physical model of dislocation climb over the dispersed particles.

  19. Correlation and relaxation times for a stochastic process with a fat-tailed steady-state distribution

    Science.gov (United States)

    Liu, Z.; Serota, R. A.

    2017-05-01

    We study a stochastic process defined by the interaction strength for the return to the mean and a stochastic term proportional to the magnitude of the variable. Its steady-state distribution is the Inverse Gamma distribution, whose power-law tail exponent is determined by the ratio of the interaction strength to stochasticity. Its time-dependence is characterized by a set of discrete times describing relaxation of respective cumulants to their steady-state values. We show that as the progressively lower cumulants diverge with the increase of stochasticity, so do their relaxation times. We analytically evaluate the correlation function and show that it is determined by the longest of these times, namely the inverse interaction strength, which is also the relaxation time of the mean. We also investigate relaxation of the entire distribution to the steady state and the distribution of relaxation times, which we argue to be Inverse Gaussian.

  20. Setting ART initiation targets in response to changing guidelines: The importance of addressing both steady-state and backlog.

    Science.gov (United States)

    Martin, Catherine; Naidoo, Nicolette P; Venter, W D Francois; Jaffer, Ambereen; Barker, Pierre M

    2014-05-12

    Target setting is useful in planning, assessing and improving antiretroviral treatment (ART) programmes. In the past 4 years, the ART initiation environment has been transformed due to the change in eligibility criteria (starting ART at a CD4+ count ART. To describe and illustrate the use of a target-setting model for estimating district-based targets in the era of an expanding ART programme and changing CD4+ count thresholds for ART initiation. Using previously described models and data for annual new HIV infections, we estimated both steady-state need for ART initiation and backlog in a North West Province district, accounting for the shift in eligibility. Comparison of actual v. targeted ART initiations was undertaken. The change in CD4+ count threshold adds a once-off group of newly eligible patients to the pool requiring ART - the backlog. The steady-state remains unchanged as it is determined by the annual rate of new HIV infections in previous years. The steady-state need for the district was 639 initiations/month, and the backlog was ~15,388 patients. After the shift in eligibility in September 2011, the steady-state target was exceeded over several months with some backlog addressed. Of the total backlog for this district, 72% remains to be cleared. South Africa has two pools of patients who need ART: the steady-state of HIV-infected patients entering the programme each year, determined by historical infection rates; and the backlog created by the shift in eligibility. The healthcare system needs to build long- term capacity to meet the steady-state need for ART and additional capacity to address the backlog.

  1. High resolution steady-state measurements of thermal contact resistance across thermal interface material junctions

    Science.gov (United States)

    Warzoha, Ronald J.; Donovan, Brian F.

    2017-09-01

    Thermal interface materials (TIMs) are meant to reduce the interfacial thermal resistance (RT) across bare metal contacts in commercial electronics packaging systems. However, there is little scientific consensus governing material design for optimized thermal performance. This is principally due to the inability to separate the effects of the intrinsic material thermal properties from the magnitude of heat flow crossing the TIM-substrate junction (RC). To date, efforts to isolate these effects using standard thermal interface material characterization techniques have not been successful. In this work, we develop an infrared thermography-based steady-state heat meter bar apparatus with a novel in situ thickness measurement system having 0.5 nm sensitivity. These in situ thickness measurements allow us to simultaneously determine RT and RC independently across current state-of-the-art TIMs with ±5% uncertainty. In this work, thermal pastes with bond line thicknesses ranging between 5 and 50 μ m are used to illustrate the capability of the apparatus to measure extremely thin materials that are expected to achieve relatively low values of RT. Results suggest that the contribution of the thermal contact resistance to the total thermal resistance can range from 5% to 80% for these materials. This finding highlights the need for appropriate metrology and independent measurements of RC and RT to better optimize thermal interface materials for a number of important electronics applications.

  2. An Empirically-based Steady-state Friction Law and its Implications for Fault Stability

    Science.gov (United States)

    Spagnuolo, E.; Nielsen, S. B.; Di Toro, G.; Violay, M.

    2015-12-01

    Empirically-based rate-and-state friction laws (RSFL) have been proposed to model the dependence of friction forces with slip and time. The relevance of the RSFL for earthquakes mechanics is that few constitutive parameters (e.g. A-B= dτ/dlog(V) with τ and V the shear stress and slip rate respectively, allow us to define the stability conditions of a fault. According to RSFL if A-B> 0, τ increases with V (rate-hardening behavior) resulting in an unconditionally stable behavior; if A-Bfrictional properties sensibly change as a function of slip or slip rate. Moreover, the RSFL were determined from experiments conducted at sub-seismic slip rates (friction experiments performed with different testing machines (rotary shear, bi-axial, tri-axial). The modified RSFL is valid at steady-state conditions from sub-seismic to seismic slip rates (0.1 μm/s frictional stability and the diversity of slip events observed at the laboratory scale. This law leads to a new definition of critical stiffness with relevance to models of seismic rupture nucleation, propagation and arrest.

  3. Steady-state visual evoked potentials as a research tool in social affective neuroscience.

    Science.gov (United States)

    Wieser, Matthias J; Miskovic, Vladimir; Keil, Andreas

    2016-12-01

    Like many other primates, humans place a high premium on social information transmission and processing. One important aspect of this information concerns the emotional state of other individuals, conveyed by distinct visual cues such as facial expressions, overt actions, or by cues extracted from the situational context. A rich body of theoretical and empirical work has demonstrated that these socioemotional cues are processed by the human visual system in a prioritized fashion, in the service of optimizing social behavior. Furthermore, socioemotional perception is highly dependent on situational contexts and previous experience. Here, we review current issues in this area of research and discuss the utility of the steady-state visual evoked potential (ssVEP) technique for addressing key empirical questions. Methodological advantages and caveats are discussed with particular regard to quantifying time-varying competition among multiple perceptual objects, trial-by-trial analysis of visual cortical activation, functional connectivity, and the control of low-level stimulus features. Studies on facial expression and emotional scene processing are summarized, with an emphasis on viewing faces and other social cues in emotional contexts, or when competing with each other. Further, because the ssVEP technique can be readily accommodated to studying the viewing of complex scenes with multiple elements, it enables researchers to advance theoretical models of socioemotional perception, based on complex, quasinaturalistic viewing situations. © 2016 Society for Psychophysiological Research.

  4. Steady-State Analysis of Genetic Regulatory Networks Modelled by Probabilistic Boolean Networks

    Directory of Open Access Journals (Sweden)

    Wei Zhang

    2006-04-01

    Full Text Available Probabilistic Boolean networks (PBNs have recently been introduced as a promising class of models of genetic regulatory networks. The dynamic behaviour of PBNs can be analysed in the context of Markov chains. A key goal is the determination of the steady-state (long-run behaviour of a PBN by analysing the corresponding Markov chain. This allows one to compute the long-term influence of a gene on another gene or determine the long-term joint probabilistic behaviour of a few selected genes. Because matrix-based methods quickly become prohibitive for large sizes of networks, we propose the use of Monte Carlo methods. However, the rate of convergence to the stationary distribution becomes a central issue. We discuss several approaches for determining the number of iterations necessary to achieve convergence of the Markov chain corresponding to a PBN. Using a recently introduced method based on the theory of two-state Markov chains, we illustrate the approach on a sub-network designed from human glioma gene expression data and determine the joint steadystate probabilities for several groups of genes.

  5. A convolutional neural network for steady state visual evoked potential classification under ambulatory environment

    Science.gov (United States)

    Kwak, No-Sang; Müller, Klaus-Robert

    2017-01-01

    The robust analysis of neural signals is a challenging problem. Here, we contribute a convolutional neural network (CNN) for the robust classification of a steady-state visual evoked potentials (SSVEPs) paradigm. We measure electroencephalogram (EEG)-based SSVEPs for a brain-controlled exoskeleton under ambulatory conditions in which numerous artifacts may deteriorate decoding. The proposed CNN is shown to achieve reliable performance under these challenging conditions. To validate the proposed method, we have acquired an SSVEP dataset under two conditions: 1) a static environment, in a standing position while fixated into a lower-limb exoskeleton and 2) an ambulatory environment, walking along a test course wearing the exoskeleton (here, artifacts are most challenging). The proposed CNN is compared to a standard neural network and other state-of-the-art methods for SSVEP decoding (i.e., a canonical correlation analysis (CCA)-based classifier, a multivariate synchronization index (MSI), a CCA combined with k-nearest neighbors (CCA-KNN) classifier) in an offline analysis. We found highly encouraging SSVEP decoding results for the CNN architecture, surpassing those of other methods with classification rates of 99.28% and 94.03% in the static and ambulatory conditions, respectively. A subsequent analysis inspects the representation found by the CNN at each layer and can thus contribute to a better understanding of the CNN’s robust, accurate decoding abilities. PMID:28225827

  6. A convolutional neural network for steady state visual evoked potential classification under ambulatory environment.

    Science.gov (United States)

    Kwak, No-Sang; Müller, Klaus-Robert; Lee, Seong-Whan

    2017-01-01

    The robust analysis of neural signals is a challenging problem. Here, we contribute a convolutional neural network (CNN) for the robust classification of a steady-state visual evoked potentials (SSVEPs) paradigm. We measure electroencephalogram (EEG)-based SSVEPs for a brain-controlled exoskeleton under ambulatory conditions in which numerous artifacts may deteriorate decoding. The proposed CNN is shown to achieve reliable performance under these challenging conditions. To validate the proposed method, we have acquired an SSVEP dataset under two conditions: 1) a static environment, in a standing position while fixated into a lower-limb exoskeleton and 2) an ambulatory environment, walking along a test course wearing the exoskeleton (here, artifacts are most challenging). The proposed CNN is compared to a standard neural network and other state-of-the-art methods for SSVEP decoding (i.e., a canonical correlation analysis (CCA)-based classifier, a multivariate synchronization index (MSI), a CCA combined with k-nearest neighbors (CCA-KNN) classifier) in an offline analysis. We found highly encouraging SSVEP decoding results for the CNN architecture, surpassing those of other methods with classification rates of 99.28% and 94.03% in the static and ambulatory conditions, respectively. A subsequent analysis inspects the representation found by the CNN at each layer and can thus contribute to a better understanding of the CNN's robust, accurate decoding abilities.

  7. Steady-state configurations of Dzyaloshinskii domain walls driven by field and current

    Energy Technology Data Exchange (ETDEWEB)

    Sánchez-Tejerina, L., E-mail: luis.st@ee.uva.es [Departamento de Electricidad y Electrónica, Facultad de Ciencias, Universidad de Valladolid, 47011 Valladolid (Spain); Departamento de Física Aplicada, Facultad de Ciencias, Universidad de Salamanca, 37011 Salamanca (Spain); Alejos, O. [Departamento de Electricidad y Electrónica, Facultad de Ciencias, Universidad de Valladolid, 47011 Valladolid (Spain); Martínez, E. [Departamento de Física Aplicada, Facultad de Ciencias, Universidad de Salamanca, 37011 Salamanca (Spain)

    2017-02-01

    The dynamics of Dzyaloshinskii domain walls (DDW) in ultrathin ferromagnetic strips with perpendicular magnetic anisotropy, for different values of both perpendicular field and longitudinal current excitation associated to the Spin-Hall effect, has been studied, taking into account different values of the interfacial Dzyaloshinskii-Moriya interaction (DMI). This study has been carried out with the help of the q-Φ one-dimensional model and micromagnetic simulations. We have found that Walker breakdown may be avoided by applying a certain threshold current, even though the inverse effect is also possible. We have also found that, for particular values of field and current, the magnetization within the DDW experiences an abrupt change of orientation, which provokes a change on the contribution of current to the terminal DDW velocity. This effect disappears for sufficiently strong DMI, as it is expected from the model. - Highlights: • Steady-state configurations of Dzyaloshinskii domain walls driven by field and current have been reported. • Field-like torques and Slonczewskii-like torques due to spin-orbit interactions have been considered. • The response is associated with the rotation of the domain wall inner magnetization. • An asymmetric behavior arising from the existence of degenerate states is shown. • The asymmetry results in different travelled distances and/or terminal speeds.

  8. Representation of Type 4 wind turbine generator for steady state short-circuit calculations

    Science.gov (United States)

    Kamara, Wouleye

    Various technical impacts are associated to the interconnection of wind turbine generators to the grid. Among them, the increase of short-circuit levels along with its effect on the settings of protecting relays has long acted as an important inhibiting factor for the interconnection of new wind power plants to the grid. This is especially true at the medium voltage level where networks operate close to their short-circuit design value [1]. As renewable energies are progressively replacing traditional power generation sources, short-circuit studies need to adequately assess the impact of newly interconnected wind power plants on the fault level of the network. For planning and design purposes, short-circuit studies are usually performed using steady-state short-circuit programs. Unfortunately, very few have developed models of wind turbine generators that accurately estimate their fault contribution in the phase domain. In particular, no commercial fault-flow analysis program specifically addresses the modeling of inverter-based wind turbine generators which behavior is based on the inverter's characteristics rather than the generator's. The main contribution of this research work is the development of a simplified and yet accurate model of full-scale converter based wind turbine generator, also called Type 4 wind turbine generator, for steady-state short-circuit calculations. The model reproduces the real behavior of the Type 4 wind turbine generator under fault conditions by correctly accounting for the effect of the full-scale converter. The data used for the model is easily accessible to planning engineers. An additional contribution of this research work is the development of a short-circuit algorithm adapted to support the proposed model of Type 4 wind-turbine generator. Short-circuit algorithm based on modified-augmented-nodal analysis (MANA) is solved iteratively to accommodate the proposed model. The algorithm is successfully implemented in CYME 7.0, a

  9. Theoretical and experimental steady-state rotordynamics of an adaptive Air Film Damper with Metal Rubber

    Science.gov (United States)

    Yanhong, Ma; Zhichao, Liang; Hong, Wang; Dayi, Zhang; Jie, Hong

    2013-10-01

    An Air Film Damper (AFD) made with a highly damping material called Metal Rubber (MR) as the outer ring is a novel damping structure that aims to reduce the remarkable vibrations produced by a flexible rotor system. The mechanism of an AFD is firstly put forward and the mechanical model describing the fluid structure interaction is constructed. Taking into consideration the complex whirl of the rotor and the precession of the floating ring, the Reynolds equation of AFDs is derived and the air film pressure is obtained. Based on these calculations, the selection of MR stiffness is introduced and the adaptive properties of AFD are analyzed. Then the effects of AFD on the rotordynamics are studied based on the characterization of the parameters of a rotor system in the steady state. The mechanism and the effects of AFD on a rotor system are verified through rotating experimental tests. The theoretical and experimental results both show that AFD can adjust the air film clearance adaptively according to the vibration of the rotor; this can not only decrease the friction between the journal and the floating ring, but can also provide additional stiffness and damping to the rotor system, thus yielding additional vibration control. The mechanism of an AFD is obtained by theoretical and experimental investigations. Due to the elastic MR serving as the outer ring, an AFD can adjust the air film clearance adaptively according to the vibration of the rotor; this not only decreases the friction between the journal and the floating ring, but also provides additional stiffness and damping to the rotor system, as a function of vibration control. Taking into consideration the complex whirl of the rotor and the precession of the floating ring, the Reynolds equation of an AFD is derived and the mechanical model is established, based on the fluid structure interaction. Moreover, based on the maximum radial displacement during the entire operational process and the minimum thickness of

  10. Two-phase bioconversion product recovery by microfiltration I. Steady state studies.

    Science.gov (United States)

    Conrad, P B; Lee, S S

    1998-03-20

    Recovery of an aqueous bioconversion product from complex, two-phase Pseudomonas putida broths containing 20% (v/v) soybean oil presents a significant challenge for downstream processing. Although not used before in multiple-phase separation for complex biotech products, crossflow filtration employing ceramic filters is one of the most attractive options which allow the design of integrated, continuous bioconversion processes. As a first attempt, we studied multichannel, monolithic ceramic membranes of different nominal pore sizes and lumen diameters under steady-state conditions. The best performance was obtained with 0.2-microm-pore/3-mm-lumen membrane, which completely rejected both cells and oil droplets from the permeate, creating a clear aqueous product stream. Although the same separation was achieved, the 50K molecular weight cut-off (MWCO) ultrafilter showed greater irreversible but similar reversible resistance, in addition to an order-of-magnitude higher membrane resistance. Larger nominal pore microfilters, such as 0.45 and 1.0 microm, experienced both cell and oil leakage even at low transmembrane pressure (10 psig). Attributed to greater shear at the same recirculation rate, smaller lumen filters did provide greater permeate flux. However, for practical purposes, the 0. 2-microm-pore/4-mm-lumen ceramic membrane was chosen for further evaluation. Transmembrane pressures up to 50 psig provided only marginal gains in filtration performance, whereas increasing shear rate resulted in linear increases in steady-state flux, presumably due to formation of shear-sensitive, complex gel/oil/cell layer near the membrane surface. A nominal shear rate of 9200 s-1 and 20 psig transmembrane pressure were chosen as optimal operating conditions. Additional studies in a clean system revealed that as low as 5% (v/v) soybean oil in deionized (DI) water resulted in an order-of-magnitude decline in steady-state permeate flux. Breakthrough of oil droplets occurred at 35 psig

  11. Measurement and Modelling of Tearing Mode Stability for Steady-State Plasmas in DIII-D

    Energy Technology Data Exchange (ETDEWEB)

    Turco, F; Luce, T; Ferron, J; Petty, C; Politzer, P; Turnbull, A; Brennan, D; Murakami, M; LoDestro, L; Pearlstein, L; Casper, T; Jayakumar, R; Holcomb, C

    2009-06-23

    High-beta, quasi-steady state scenarios represent a fundamental step towards the performance required for future fusion reactors. In DIII-D steady-state scenario discharges, the normalized beta {beta}{sub N} {triple_bond} {beta}(%) {center_dot} a(m) {center_dot} B{sub T}(T)/I{sub p}(MA) (where {beta} is the ratio of the plasma pressure to the magnetic field pressure, {alpha} the plasma minor radius, B{sub T} the toroidal magnetic field and I{sub p} the plasma current) exceeds the no-wall ideal kink beta limit. The performance of this scenario is limited by the onset of an n = 1 tearing mode, which appears on the resistive evolution time-scale (1-2 s) at constant pressure and causes both a loss of confinement and a radial redistribution of the current density from which the available current drive sources cannot recover. It is routinely observed that the injection of electron cyclotron current drive (ECCD), with a broad deposition localized around {rho} {approx} 0.35, can prevent the mode from appearing. It must be noted that this is not a case of a direct stabilization due to the interaction with the mode's rational surface. These variations of the scenario are illustrated in Fig. 1, where the total injected power [neutral beam injection (NBI) and ECCD], {beta}{sub N} and the n = 1 magnetic perturbation at the outer wall are shown. In case (a), the onset of the n = 1 mode is observed when the EC power is not present or if it is stopped before the end of the high {beta} phase, whereas in case (b) the difference is pointed out between broad and narrow current deposition (with the narrow deposition case becoming unstable). The current density profile evolution and the MHD modes of several sets of significant discharges with and without ECCD (at different locations) have been analyzed, using motional Stark effect (MSE) spectroscopy measurements for the former and edge magnetic probes measurements, toroidal rotation profiles and fast electron cyclotron emission

  12. Pharmacokinetics of eslicarbazepine acetate at steady-state in adults with partial-onset seizures.

    Science.gov (United States)

    Perucca, E; Elger, C; Halász, P; Falcão, A; Almeida, L; Soares-da-Silva, P

    2011-09-01

    To evaluate the pharmacokinetics of eslicarbazepine acetate (ESL) at steady-state in adults with partial-onset seizures who have taken ESL for at least 1 year with one or two concomitant antiepileptic drugs (AEDs). Blood samples for the pharmacokinetic assessment were taken at pre-dose, and 1, 2, 3, 4, 6, 8, 12 and 24h post-dose at steady-state in 51 patients stabilised on chronic (beyond 1 year) treatment with ESL 400mg (n=7), 800mg (n=26) or 1200mg (n=18) once-daily. Most patients (n=29, 56.9%) were receiving 2 concomitant AEDs, and most frequent co-medications were carbamazepine (n=34, 66.7%) and valproic acid (n=19, 37.3%). Plasma concentrations of ESL and its metabolites eslicarbazepine, R-licarbazepine and oxcarbazepine (OXC) were determined by a validated chiral method using liquid chromatography coupled to mass spectrometry. Similarly to earlier findings in healthy subjects, plasma ESL concentrations were consistently below the lower limit of quantification (50ng/mL). The major compound in plasma was the active metabolite eslicarbazepine, which reached maximum concentrations (C(max)) 2h post-dose; thereafter, its plasma concentrations declined with a mean apparent half-life of 13, 14, and 20h in patients receiving ESL doses of 400, 800, and 1200mg once daily, respectively. Eslicarbazepine C(max) were 9.7, 15.5 and 23.0μg/mL, and areas under the plasma concentration-time curve over the dosing interval (AUC(0-24)) were 132.5, 205.4 and 336.1μgh/mL in patients receiving ESL doses of 400, 800 and 1200mg once-daily, respectively. Eslicarbazepine main pharmacokinetic parameters (C(max) and AUC(0-24)) were dose-proportional. R-licarbazepine and OXC were minor metabolites. Following once-daily oral administration of ESL 400mg, 800mg and 1200mg to epilepsy patients treated concomitantly with one or two other AEDs, ESL was rapidly converted to eslicarbazepine, which was the primary active compound found in plasma. Systemic exposure to eslicarbazepine was dose

  13. Nonequilibrium steady state in open quantum systems: Influence action, stochastic equation and power balance

    Energy Technology Data Exchange (ETDEWEB)

    Hsiang, J.-T., E-mail: cosmology@gmail.com [Center for Field Theory and Particle Physics, Fudan University, Shanghai 200433 (China); Department of Physics, National Dong Hwa University, Hualien 97401, Taiwan (China); Hu, B.L. [Center for Field Theory and Particle Physics, Fudan University, Shanghai 200433 (China); Joint Quantum Institute and Maryland Center for Fundamental Physics, University of Maryland, College Park, MD 20742 (United States)

    2015-11-15

    The existence and uniqueness of a steady state for nonequilibrium systems (NESS) is a fundamental subject and a main theme of research in statistical mechanics for decades. For Gaussian systems, such as a chain of classical harmonic oscillators connected at each end to a heat bath, and for classical anharmonic oscillators under specified conditions, definitive answers exist in the form of proven theorems. Answering this question for quantum many-body systems poses a challenge for the present. In this work we address this issue by deriving the stochastic equations for the reduced system with self-consistent backaction from the two baths, calculating the energy flow from one bath to the chain to the other bath, and exhibiting a power balance relation in the total (chain + baths) system which testifies to the existence of a NESS in this system at late times. Its insensitivity to the initial conditions of the chain corroborates to its uniqueness. The functional method we adopt here entails the use of the influence functional, the coarse-grained and stochastic effective actions, from which one can derive the stochastic equations and calculate the average values of physical variables in open quantum systems. This involves both taking the expectation values of quantum operators of the system and the distributional averages of stochastic variables stemming from the coarse-grained environment. This method though formal in appearance is compact and complete. It can also easily accommodate perturbative techniques and diagrammatic methods from field theory. Taken all together it provides a solid platform for carrying out systematic investigations into the nonequilibrium dynamics of open quantum systems and quantum thermodynamics. -- Highlights: •Nonequilibrium steady state (NESS) for interacting quantum many-body systems. •Derivation of stochastic equations for quantum oscillator chain with two heat baths. •Explicit calculation of the energy flow from one bath to the

  14. Steady-state pharmacokinetics, pharmacodynamics and tolerability of donepezil hydrochloride in hepatically impaired patients

    Science.gov (United States)

    Reyes, Josephine F; Vargas, Ramon; Kumar, Dinesh; Cullen, Edward I; Perdomo, Carlos A; Pratt, Raymond D

    2004-01-01

    Aims To evaluate the pharmacokinetics (PK), pharmacodynamics (PD), tolerability and safety of donepezil HCl 5 mg following oral doses for 1 and 24 days in hepatically impaired patients compared with healthy controls under steady-state, multiple-dose conditions. Methods In this single-centre, multiple-dose, open-label study, patients with impaired hepatic function (Child–Pugh grade A or B) and healthy controls (matched by gender, age and weight to the hepatically impaired patients) received a single 5 mg dose of donepezil on day 1 and then donepezil HCl 5 mg once daily from days 6 to 29. PK and PD (determination of erythrocyte acetylcholinesterase inhibition) parameters were evaluated on days 1 and 29. Treatment-emergent adverse events (AEs), vital signs, physical examination and clinical laboratory test parameters were monitored throughout the study. Results A total of 35 subjects (18 patients with hepatic impairment and 17 healthy controls) were enrolled and 32 subjects (16 in each group) completed the study. On day 1 (following a single dose) hepatically impaired patients showed a significant decrease in Tmax, while t½ and AUC0–∞ were significantly increased compared with the healthy controls. On day 29 (following multiple doses), AUC0–24 h, Cmax, t½, CSS, and RA were significantly increased in hepatically impaired patients compared with healthy controls. AUC0–24 h increased by 47.6% in the patients with hepatic impairment compared with the healthy controls. There were no significant differences in PD between the groups, although at steady state, the mean AChE inhibition was 16.2% higher in the hepatically impaired patients. No serious AEs were reported and no subject withdrew from the study due to AEs. The most common AEs in both groups were headache and diarrhoea. No clinically significant changes from baseline were observed in vital signs, physical examination findings or electrocardiograms. There was a significant difference in the number of

  15. The Preliminary GAMMA Code Thermal hydraulic Analysis for the Steady State of HTR-10 Initial Core

    Energy Technology Data Exchange (ETDEWEB)

    Jun, Ji Su; Lim, Hong Sik; Lee, Won Jae

    2006-07-15

    This report describes the preliminary thermalhydraulic analysis of HTR-10 steady state full power initial core to provide a benchmark calculation of VHTGR(Very High-Temperature Gas-Cooled Reactors) safety analysis code of GAMMA(GAs Multicomponent Mixture Analysis). The input data of GAMMA code are produced for the models of fluid block, wall block, radiation heat transfer and each component material properties in HTR-10 reactor. The temperature and flow distributions of HTR-10 steady state 10 MW{sub th} full power initial core are calculated by GAMMA code with boundary conditions of total reactor inlet flow rate of 4.32 kg/s, inlet temperature of 250 .deg. C, inlet pressure of 3 MPa, outlet pressure of 2.992 MPa and the fixed temperature at RCCS water cooling tube of 50 .deg C. The calculation results are compared with the measured solid material temperatures at 22 fixed instrumentation positions in HTR-10. The wall temperature distribution in pebble bed core shows that the minimum temperature of 358 .deg. C is located at upper core, a higher temperature zone than 829 .deg. C is located at the inner region of 0.45 m radius at the bottom of core centre, and the maximum wall temperature is 897 .deg. C. The wall temperatures linearly decreases at radially and axially farther side from the bottom of core centre. The maximum temperature of RPV is 230 .deg. C, and the maximum values of fuel average temperature and TRISO centreline temperature are 907 .deg. C and 929 .deg. C, respectively and they are much lower than the fuel temperature limitation of 1230 .deg. C. The comparsion between the GAMMA code predictions and the measured temperature data shows that the calculation results are very close to the measured values in top and side reflector region, but a great difference is appeared in bottom reflector region. Some measured data are abnormally high in bottom reflector region, and so the confirmation of data is necessary in future. Fifteen of twenty two data have a

  16. Steady-state critical loads of acidity for forest soils in the Georgia Basin, British Columbia

    Directory of Open Access Journals (Sweden)

    Shaun A. WATMOUGH

    2010-08-01

    Full Text Available There has been growing interest in acid rain research in western Canada where sulphur (S and nitrogen (N emissions are expected to increase during the next two decades. One region of concern is southern British Columbia, specifically the Georgia Basin, where emissions are expected to increase owing to the expansion of industry and urban centres (Vancouver and Victoria. In the current study, weathering rates and critical loads of acidity (S and N for forest soils were estimated at nineteen sites located within the Georgia Basin. A base cation to aluminium ratio of 10 was selected as the critical chemical criterion associated with ecosystem damage. The majority of the sites (58% had low base cation weathering rates (≤50 meq m–2 y–1 based on the PROFILE model. Accordingly, mean critical load for the study sites, estimated using the steady-state mass balance model, ranged between 129–168 meq m–2 y–1. Annual average total (wet and dry S and N deposition during the period 2005–2006 (estimated by the Community Multiscale Air Quality model, exceeded critical load at five–nine of the study sites (mean exceedance = 32–46 meq m–2 y–1. The high-elevation (>1000 m study sites had shallow, acid sensitive, soils with low weathering rates; however, critical loads were predominantly exceeded at sites close to Vancouver under higher modelled deposition loads. The extent of exceedance is similar to other industrial regions in western and eastern Canada.

  17. Steady-state visually evoked potential correlates of human body perception.

    Science.gov (United States)

    Giabbiconi, Claire-Marie; Jurilj, Verena; Gruber, Thomas; Vocks, Silja

    2016-11-01

    In cognitive neuroscience, interest in the neuronal basis underlying the processing of human bodies is steadily increasing. Based on functional magnetic resonance imaging studies, it is assumed that the processing of pictures of human bodies is anchored in a network of specialized brain areas comprising the extrastriate and the fusiform body area (EBA, FBA). An alternative to examine the dynamics within these networks is electroencephalography, more specifically so-called steady-state visually evoked potentials (SSVEPs). In SSVEP tasks, a visual stimulus is presented repetitively at a predefined flickering rate and typically elicits a continuous oscillatory brain response at this frequency. This brain response is characterized by an excellent signal-to-noise ratio-a major advantage for source reconstructions. The main goal of present study was to demonstrate the feasibility of this method to study human body perception. To that end, we presented pictures of bodies and contrasted the resulting SSVEPs to two control conditions, i.e., non-objects and pictures of everyday objects (chairs). We found specific SSVEPs amplitude differences between bodies and both control conditions. Source reconstructions localized the SSVEP generators to a network of temporal, occipital and parietal areas. Interestingly, only body perception resulted in activity differences in middle temporal and lateral occipitotemporal areas, most likely reflecting the EBA/FBA.

  18. Hydroxyl radical observations during the wintertime in Beijing and comparison with photochemical steady state predictions

    Science.gov (United States)

    Whalley, Lisa; Woodward-Massey, Robert; Slater, Eloise; Ye, Chunxiang; Heard, Dwayne; Crilley, Leigh; Kramer, Louisa; Bloss, William; Squires, Freya; Dunmore, Rachel; Lee, James

    2017-04-01

    In Beijing, a megacity of more than 21 million inhabitants, poor urban air quality has a demonstrable effect on human health. During the wintertime, anthropogenic emissions from fossil fuel combustion can lead to high aerosol loadings and frequent haze events. A high oxidation capacity on hazy days has previously been inferred from the significant contribution secondary organic aerosol (SOA) make to total PM2.5 (Huang et al., 2014). The hydroxyl radical (OH) mediates virtually all of the oxidative chemistry in the atmosphere, being responsible for the transformation of primary emissions into secondary pollutants such as NO2, O3 and SOA. Understanding the sources and sinks of OH in the atmosphere is essential in improving predictions of the lifetimes and chemical processing of pollutants and spatial scales of their transport within urban areas. We will present OH measurements made in central Beijing during the recent 'An Integrated Study of AIR Pollution PROcesses in Beijing (AIRPRO)' project which took place in November and December 2016. We will compare the OH observations, made over a range of meteorological conditions including a number of haze episodes, to steady state calculations constrained to the total OH reactivity and key OH precursors that were measured alongside. Through this comparison we will identify the major OH sources which sustain the wintertime oxidation capacity.

  19. Degradation of Leakage Currents in Solid Tantalum Capacitors Under Steady-State Bias Conditions

    Science.gov (United States)

    Teverovsky, Alexander A.

    2010-01-01

    Degradation of leakage currents in various types of solid tantalum capacitors under steady-state bias conditions was investigated at temperatures from 105 oC to 170 oC and voltages up to two times the rated voltage. Variations of leakage currents with time under highly accelerated life testing (HALT) and annealing, thermally stimulated depolarization currents, and I-V characteristics were measured to understand the conduction mechanism and the reason for current degradation. During HALT the currents increase gradually up to three orders of magnitude in some cases, and then stabilize with time. This degradation is reversible and annealing can restore the initial levels of leakage currents. The results are attributed to migration of positively charged oxygen vacancies in tantalum pentoxide films that diminish the Schottky barrier at the MnO2/Ta2O5 interface and increase electron injection. A simple model allows for estimation of concentration and mobility of oxygen vacancies based on the level of current degradation.

  20. Steady state performance of copper impregnated Ni/PTFE gas diffusion electrode in alkaline fuel cell

    Energy Technology Data Exchange (ETDEWEB)

    Al-Saleh, M.A.; Gultekin, S.; Al-Zakri, A.S.; Khan, A.A.A. [King Fahd Univ. of Petroleum and Minerals, Dhahran (Saudi Arabia). Dept. of Chemical Engineering

    1996-12-31

    The steady-state polarization measurements on a Raney nickel gas diffusion electrode impregnated with copper oxide were carried out in a half-cell setup with 25% KOH electrolyte solution. Pure hydrogen gas was used at a pressure of 1.2 bars in the temperature range of 25-75{sup o}C. The results were compared with almost the same electrode without copper. There was an improvement in the performance of the electrode impregnated with about 8 wt% Cu. This improvement is much more pronounced at higher temperatures and higher current densities. The spherical Raney catalyst grain model was used to determine the kinetic parameters such as exchange current density (i{sub o}) and charge transfer coefficient ({alpha}) for the electrode. The values found for the exchange current densities at various temperatures were 6.6 x 10{sup -6} -3.1 x 10{sup -4} mA cm{sup -2} and for the charge transfer coefficient was about 0.6. The exchange current density followed an exponential relation with temperature. The apparent activation energy for the electrode reaction at zero mV overvoltage was found to be lower (28 kJ mol{sup -1}) than that reported in the literature (32 kJ mol{sup -1}). The higher values for the exchange current densities and lower values for the activation energies are indication of better performance of the electrode used in this study. (Author)

  1. The Tectonics Model of Coronal Heating: Unsteady Dynamics and Scaling in Statistical Steady State

    Science.gov (United States)

    Ng, C. S.; Lin, L.; Bhattacharjee, A.

    2009-11-01

    The tectonics model of coronal heating, proposed by Priest et al. [Astrophys. J., 576, 533 (2002)] envisions coronal heating caused by a hierarchy of current sheets produced by the movement of a myriad of flux elements in the magnetic carpet covering the Sun. We have recently obtained new scaling results in two dimensions (2D) suggesting that the heating rate becomes independent of resistivity in a statistical steady state [C. S. Ng and A. Bhattacharjee, Astrophys. J., 675, 899 (2008)]. Our numerical work has now been extended to 3D. Random photospheric footpoint motion is applied to obtain converged average coronal heating rates. In the large Lundquist number limit, we find that the heating rate is independent of the Lundquist number, with average magnetic energy saturating at a constant level due to the formation of strong current layers and subsequent disruptions. In this talk, we will present our latest numerical results from large-scale 3D simulations, and discuss differences with previous scaling laws.

  2. Cerebral oxygen demand for short-lived and steady-state events.

    Science.gov (United States)

    Herman, Peter; Sanganahalli, Basavaraju G; Blumenfeld, Hal; Hyder, Fahmeed

    2009-05-01

    Because of the importance of oxidative energetics for cerebral function, extraction of oxygen consumption (CMR(O2)) from blood oxygenation level-dependent (BOLD) signal using multi-modal measurements of blood flow (CBF) and volume (CBV) has become an accepted functional magnetic resonance imaging (fMRI) technique. This approach, termed calibrated fMRI, is based on a biophysical model which describes tissue oxygen extraction at steady-state. A problem encountered for calculating dynamic CMR(O2) relates to concerns whether the conventional BOLD model can be applied transiently. In particular, it is unclear whether calculation of CMR(O2) differs between short and long stimuli. Linearity was experimentally demonstrated between BOLD-related components and neural activity, thereby making it possible to use calibrated fMRI in a dynamic manner. We used multi-modal fMRI and electrophysiology, in alpha-chloralose anesthetized rats during forepaw stimulation to show that respective transfer functions (of BOLD, CBV, CBF) generated by deconvolution with neural activity are time invariant, for events in the millisecond to minute range. These results allowed extraction of a significant component of the BOLD signal that can be ascribed to CMR(O2) transients. We discuss the importance of minimizing residual signal, represented by the difference between modeled and raw signals, in convolution analysis of multi-modal signals.

  3. An RBCC protein implicated in maintenance of steady-state neuregulin receptor levels.

    Science.gov (United States)

    Diamonti, A John; Guy, Pamela M; Ivanof, Caryn; Wong, Karen; Sweeney, Colleen; Carraway, Kermit L

    2002-03-05

    Despite numerous recent advances in our understanding of the molecular mechanisms underlying receptor tyrosine kinase down-regulation and degradation in response to growth factor binding, relatively little is known about ligand-independent receptor tyrosine kinase degradation mechanisms. In a screen for proteins that might regulate the trafficking or localization of the ErbB3 receptor, we have identified a tripartite or RBCC (RING, B-box, coiled-coil) protein that interacts with the cytoplasmic tail of the receptor in an activation-independent manner. We have named this protein Nrdp1 for neuregulin receptor degradation protein-1. Northern blotting reveals ubiquitous distribution of Nrdp1 in human adult tissues, but message is particularly prominent in heart, brain, and skeletal muscle. Nrdp1 interacts specifically with the neuregulin receptors ErbB3 and ErbB4 and not with epidermal growth factor receptor or ErbB2. When coexpressed in COS7 cells, Nrdp1 mediates the redistribution of ErbB3 from the cell surface to intracellular compartments and induces the suppression of ErbB3 and ErbB4 receptor levels but not epidermal growth factor receptor or ErbB2 levels. A putative dominant-negative form of Nrdp1 potentiates neuregulin-stimulated Erk1/2 activity in transfected MCF7 breast tumor cells. Our observations suggest that Nrdp1 may act to regulate steady-state cell surface neuregulin receptor levels, thereby influencing the efficiency of neuregulin signaling.

  4. Steady-state Performance Analysis of Collector System Designs for Large-scale Offshore Wind Farms

    Energy Technology Data Exchange (ETDEWEB)

    Quinonez-Varela, G.; Ault, G.W.; McDonald, J.R. [Institute for Energy and Environment, University of Strathclyde, 204 George St., Glasgow G1 1XW, Scotland (United Kingdom)

    2006-07-01

    This paper presents a comparative analysis of the steady-state performance of various designs for the electrical collector system of offshore wind farms and discusses the advantages and disadvantages of each of these designs and their application within large-scale offshore developments. A series of power systems studies were carried out for a proposed 1 GW wind farm off the northeast coast of Scotland, with the plant set to generate at a range of power outputs in order to investigate the impact on the loading and losses of the collector system. The impact on voltage level changes on the busbars within the wind farm under various conditions of reactive power demand, i.e. considering both typical squirrel-cage machines (with typically low lagging power factors) and modern doubly-fed generators (with capability to vary power factor in lagging/leading ranges), was also investigated. In addition, for collector system designs with redundant cables, contingency conditions of losing one of the cables to the hub end were investigated. The overall results have lead to consider the application of 'single-sided ring' designs for large-scale offshore wind farms since it achieves fewer losses and also provides greater adequacy and reliability. Finally, the authors introduce an alternative design based on 'single-sided ring' arrangement which seems a more suitable option taking into account potential economic barriers from the original one-to-one design.

  5. Using Auditory Steady-State Responses for Measuring Hearing Protector Attenuation

    Science.gov (United States)

    Valentin, Olivier; John, Sasha M.; Laville, Frédéric

    2017-01-01

    Introduction: Present methods of measuring the attenuation of hearing protection devices (HPDs) have limitations. Objective measurements such as field microphone in real-ear do not assess bone-conducted sound. Psychophysical measurements such as real-ear attenuation at threshold (REAT) are biased due to the low frequency masking effects from test subjects’ physiological noise and the variability of measurements based on subjective responses. An auditory steady-state responses (ASSRs) procedure is explored as a technique which might overcome these limitations. Subjects and Methods: Pure tone stimuli (500 and 1000 Hz), amplitude modulated at 40 Hz, are presented to 10 normal-hearing adults through headphones at three levels in 10 dB steps. Two conditions were assessed: unoccluded ear canal and occluded ear canal. ASSR amplitude data as a function of the stimulation level are linearized using least-square regressions. The “physiological attenuation” is then calculated as the average difference between the two measurements. The technical feasibility of measuring earplug attenuation is demonstrated for the group average attenuation across subjects. Results: No significant statistical difference is found between the average REAT attenuation and the average ASSR-based attenuation. Conclusion: Feasibility is not yet demonstrated for individual subjects since differences between the estimates occurred for some subjects. PMID:28164933

  6. LAVENDER: A steady-state core analysis code for design studies of accelerator driven subcritical reactors

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Shengcheng; Wu, Hongchun; Cao, Liangzhi; Zheng, Youqi, E-mail: yqzheng@mail.xjtu.edu.cn; Huang, Kai; He, Mingtao; Li, Xunzhao

    2014-10-15

    Highlights: • A new code system for design studies of accelerator driven subcritical reactors (ADSRs) is developed. • S{sub N} transport solver in triangular-z meshes, fine deletion analysis and multi-channel thermal-hydraulics analysis are coupled in the code. • Numerical results indicate that the code is reliable and efficient for design studies of ADSRs. - Abstract: Accelerator driven subcritical reactors (ADSRs) have been proposed and widely investigated for the transmutation of transuranics (TRUs). ADSRs have several special characteristics, such as the subcritical core driven by spallation neutrons, anisotropic neutron flux distribution and complex geometry etc. These bring up requirements for development or extension of analysis codes to perform design studies. A code system named LAVENDER has been developed in this paper. It couples the modules for spallation target simulation and subcritical core analysis. The neutron transport-depletion calculation scheme is used based on the homogenized cross section from assembly calculations. A three-dimensional S{sub N} nodal transport code based on triangular-z meshes is employed and a multi-channel thermal-hydraulics analysis model is integrated. In the depletion calculation, the evolution of isotopic composition in the core is evaluated using the transmutation trajectory analysis algorithm (TTA) and fine depletion chains. The new code is verified by several benchmarks and code-to-code comparisons. Numerical results indicate that LAVENDER is reliable and efficient to be applied for the steady-state analysis and reactor core design of ADSRs.

  7. High-resolution constructive interference in a steady state imaging of cervicothoracic adhesive arachnoiditis.

    Science.gov (United States)

    Ikushima, I; Korogi, Y; Hirai, T; Yamashita, Y

    2007-01-01

    To assess the usefulness of constructive interference in a steady state (CISS) sequence for an evaluation of cervicothoracic adhesive arachnoiditis. Seven patients with arachnoiditis underwent magnetic resonance imaging with T1- and T2-weighted fast spin-echo (FSE) and 3-dimensional CISS sequences. Three observers compared T2-weighted FSE and 3-dimensional CISS images with regard to image quality for spinal adhesive arachnoiditis. Magnetic resonance appearances accompanied with cervicothoracic adhesive arachnoiditis on CISS coupled with T2-weighted FSE sequences were also evaluated. The CISS images were superior to T2-weighted FSE images in the demarcation of spinal cord, dura matter, nerve root, and adhesive point. In our 7 cases with cervicothoracic adhesive arachnoiditis, dural thickening in 2 cases, syringomyelia in 6, arachnoidal cysts in 3, findings of presyrinx in 2, intramedullary microcyst in 2, and deformity of the spinal cord were present. A CISS sequence was more desirable for an evaluation of the cervicothoracic adhesive arachnoiditis than T2-weighted FSE images and could provide useful additional information.

  8. Maximal lactate steady state and the upper boundary of heavy intensity domain in trained cyclists

    Directory of Open Access Journals (Sweden)

    Camila Coelho Greco

    2009-06-01

    Full Text Available The objective of this study was to determine the validity of maximum lactate steady state (MLSS for the identification of the upper limit of the heavy-intensity domain in well-trained cyclists. Fourteen male cyclists (25.5 ± 4.4 years, 69.5 ± 7.8 kg, 175.8 ± 7.5 cm underwent the following tests on different days: incremental exercise test until exhaustion to determine peak oxygen uptake (VO2peak, and 2 to 4 constant submaximal load tests to determine MLSS. VO2 obtained in the 30th min was significantly higher than that obtained in the 3rd min of exercise performed at 100% MLSS (3379.3 ± 250.1 vs. 3496.7 ± 280.2 ml/min, p0.05. These results suggest that during heavy exercise (MLSS VO2 does not present stability when values obtained around the 3rd minute of exercise are used as reference. MLSS does not seem to be the upper limit of the heavy-intensity domain in trained subjects since VO2peak is not reached by the end of 30 min of exercise when exercise is performed above this intensity (~ 5%.

  9. Dynamic variation in cycling of hematopoietic stem cells in steady state and inflammation.

    Science.gov (United States)

    Takizawa, Hitoshi; Regoes, Roland R; Boddupalli, Chandra S; Bonhoeffer, Sebastian; Manz, Markus G

    2011-02-14

    Hematopoietic stem cells (HSCs) maintain blood production. How often mouse HSCs divide and whether each HSC contributes simultaneously, sequentially, or repetitively to hematopoiesis remains to be determined. We track division of 5-(and-6)-carboxyfluorescein diacetate succinimidyl ester (CFSE)-labeled HSC in vivo. We found that, in steady-state mice, bone marrow cells capable of reconstituting lifelong hematopoiesis are found within both fast-cycling (undergoing five or more divisions in 7 wk) and quiescent (undergoing zero divisions in 12-14 wk) lineage marker-negative c-Kit(+) Sca-1(+) populations. The contribution of each population to hematopoiesis can fluctuate with time, and cells with extensive proliferative history are prone to return to quiescence. Furthermore, injection of the bacterial component lipopolysaccharide increased the proliferation and self-renewal capacity of HSCs. These findings suggest a model in which all HSCs undergo dynamic and demand-adapted entry into and exit out of the cell cycle over time. This may facilitate a similar degree of turnover of the entire HSC pool at the end of life.

  10. Quantitative in silico analysis of neurotransmitter pathways under steady state conditions

    Directory of Open Access Journals (Sweden)

    Erkki eSomersalo

    2013-10-01

    Full Text Available The modeling of glutamate/GABA-glutamine cycling in the brain tissue involving astrocytes, glutamatergic, and GABAergic neurons leads to a complex compartmentalized metabolic network that comprises neurotransmitter synthesis, shuttling, and degradation. Without advanced computational tools, it is difficult to quantitatively track possible scenarios and identify viable ones. In this article, we follow a sampling-based computational paradigm to analyze the biochemical network in a multi-compartment system modeling astrocytes, glutamatergic and GABAergic neurons, and address some questions about the details of transmitter cycling, with particular emphasis on the ammonia shuttling between astrocytes and neurons, and the synthesis of transmitter GABA. More specifically, we consider the joint action of the alanine-lactate shuttle, the branched chain amino acid shuttle, and the glutamine-glutamate cycle, as well as the role of glutamate dehydrogenase (GDH activity. When imposing a minimal amount of bound constraints on reaction and transport fluxes, a preferred stoichiometric steady state equilibrium requires an unrealistically high reductive GDH activity in neurons, indicating the need for additional bound constants which were included in subsequent computer simulations. The statistical flux balance analysis also suggests a stoichiometrically viable role for leucine transport as an alternative to glutamine for replenishing the glutamate pool in neurons.

  11. Effect of sludge discharge positions on steady-state aerobic granules in sequencing batch reactor (SBR).

    Science.gov (United States)

    Liu, Lin; Gao, Da-Wen; Liang, Hong

    2012-01-01

    We have investigated the effect of sludge discharge location on the steady-state aerobic granules in sequencing batch reactors (SBRs). Two SBRs were operated concurrently with the same sludge retention time using sludge discharge ports at: (a) the reactor bottom in R1; and (b) the reactor middle-lower level in R2. Results indicate that both reactors could maintain sludge granulation and stable operation, but the two different sludge discharge methods resulted in significantly different aerobic granule characteristics. Over 30 days, the chemical oxygen demand (COD) removal of the two reactors was maintained at similar levels (above 96%), and typical bioflocs were not observed. The average aerobic granule size in R2 was twice that in R1, as settling velocity increased in proportion to size increment. Meanwhile, the production yields of polysaccharide and protein content in R2 were always higher than those in R1. However, due to mass transfer limitations and the presence of anaerobes in the aerobic granule cores, larger granules had a tendency to disintegrate in R2. Thus, we conclude that a sludge discharge port situated at the reactor bottom is beneficial for aerobic granule stability, and enhances the potential for long-term aerobic granule SBR operation.

  12. Sensitivity of non-steady-state photoelectromotive force-based adaptive photodetectors and characterization techniques.

    Science.gov (United States)

    Stepanov, S I

    1994-02-20

    The light-to-electricity conversion efficiency of the non-steady-state photoelectromotive force effect and its threshold sensitivity for the detection of phase-modulated optical signals and space-charge electric fields are evaluated. It is shown that for the optimal conditions of operation (the carrier spatial frequency is equal to the inverse diffusion length of the photocarriers, the detected frequency is higher than the cutoff frequency of the electromotive force signal, and the load resistance is higher than the resistance of the sample), the generation-recombination noise is approximately equal to the thermal noise of the sample resistance. In this case the threshold sensitivity of the adaptive photodetector without an external dc bias is independent of the parameters of the crystal used and can be only 4√2 times lower than that caused by the generation-recombination noise in a conventional photoresistor. Unlike in photodiodes and photoresistors, the output noise caused by laser intensity fluctuations is of the multiplicative type in the adaptive photodetectors.

  13. Characterization of the Inlet Port Flow under Steady-State Conditions Using PIV and POD

    Directory of Open Access Journals (Sweden)

    Mohammed El-Adawy

    2017-11-01

    Full Text Available The current study demonstrates an experimental investigation of the tumble flow structures using Particle Image Velocimetry (PIV under steady-state conditions considering the central vertical tumble plane. The experiments were carried out on a four-valve, pent-roof Gasoline Direct Injection (GDI engine head at different valve lifts and with a pressure difference of 150 mmH2O across the intake valves. Furthermore, the Proper Orthogonal Decomposition (POD analytical technique was applied to PIV-measured velocity vector maps to characterize the flow structures at various valve lifts, and hence the different rig tumble values. The results show that at low valve lifts (1 to 5 mm, 48.9 to 46.6% of the flow energy is concentrated in the large (mode 1 eddies with only 8.4 to 11.46% in mode 2 and 7.2 to 7.5 in mode 3. At high valve lifts, it can be clearly seen that some of the energy in the large eddies of mode 1 is transferred to the smaller flow structures of modes 2 and 3. This can be clearly seen at valve lift 10 mm where the values of the flow energy were 40.6%, 17.3%, and 8.0% for modes 1, 2, and 3, respectively.

  14. Steady-state fuel behavior modeling of nitride fuels in FRAPCON-EP

    Science.gov (United States)

    Feng, Bo; Karahan, Aydın; Kazimi, Mujid S.

    2012-08-01

    Fuel material properties and mechanistic fission gas models in FRAPCON-EP were updated to model the steady-state behavior of high-porosity nitride fuel operating at temperatures below half of the melting point. The fuel thermal conductivity and fuel thermal expansion models were updated with correlations for UN and (U,Pu)N fuels. Hot-pressing of the as-fabricated porosity was modeled as a function of the hydrostatic pressure and creep rate. The solid fission product swelling was assumed to increase linearly with burnup. Fission gas swelling constitutive models were updated to appropriately capture the intragranular gas bubble evolution in nitride fuel. Intergranular gas swelling was neglected due to the assumed high porosity of the fuel. The fission gas release behavior was modeled by fitting the fission gas diffusion coefficient in UN to FRAPCON's default fission gas release model. This fitted gas diffusion coefficient reflects the effects of porosity, burnup, operating temperature, fission rate, and bubble sink strength. Fission gas release and fuel swelling benchmarks against irradiation data were performed. The updated code was applied to UN fuel in typical PWR geometry and operating conditions, with an extended cycle length of 24 months. The results show that swelling of the nitride fuel up to 60 MWd/kg burnup did not lead to excessive straining of the cladding. Furthermore, this study showed that a porous (>15% porosity) nitride fuel pellet could achieve a much higher margin to failure from the cladding collapse and grid-to-rod fretting.

  15. Research on steady-state visual evoked potentials in 3D displays

    Science.gov (United States)

    Chien, Yu-Yi; Lee, Chia-Ying; Lin, Fang-Cheng; Huang, Yi-Pai; Ko, Li-Wei; Shieh, Han-Ping D.

    2015-05-01

    Brain-computer interfaces (BCIs) are intuitive systems for users to communicate with outer electronic devices. Steady state visual evoked potential (SSVEP) is one of the common inputs for BCI systems due to its easy detection and high information transfer rates. An advanced interactive platform integrated with liquid crystal displays is leading a trend to provide an alternative option not only for the handicapped but also for the public to make our lives more convenient. Many SSVEP-based BCI systems have been studied in a 2D environment; however there is only little literature about SSVEP-based BCI systems using 3D stimuli. 3D displays have potentials in SSVEP-based BCI systems because they can offer vivid images, good quality in presentation, various stimuli and more entertainment. The purpose of this study was to investigate the effect of two important 3D factors (disparity and crosstalk) on SSVEPs. Twelve participants participated in the experiment with a patterned retarder 3D display. The results show that there is a significant difference (p-valuefuture.

  16. Generalized Haldane equation and fluctuation theorem in the steady-state cycle kinetics of single enzymes.

    Science.gov (United States)

    Qian, Hong; Xie, X Sunney

    2006-07-01

    Enzyme kinetics are cyclic. We study a Markov renewal process model of single-enzyme turnover in nonequilibrium steady state (NESS) with sustained concentrations for substrates and products. We show that the forward and backward cycle times have identical nonexponential distributions: Theta + (t)=Theta_(t). This equation generalizes the Haldane relation in reversible enzyme kinetics. In terms of the probabilities for the forward (p+) and backward (p-) cycles, kBT ln(p+/p-) is shown to be the chemical driving force of the NESS, Delta mu. More interestingly, the moment generating function of the stochastic number of substrate cycle v(t), , follows the fluctuation theorem in the form of Kurchan-Lebowitz-Spohn-type symmetry. When lambda=delta mu/kBT, we obtain the Jarzynski-Hatano-Sasa-type equality identical with 1 for all t, where v Delta mu is the fluctuating chemical work done for sustaining the NESS. This theory suggests possible methods to experimentally determine the nonequilibrium driving force in situ from turnover data via single-molecule enzymology.

  17. Auditory-steady-state response reliability in the audiological diagnosis after neonatal hearing screening.

    Science.gov (United States)

    Núñez-Batalla, Faustino; Noriega-Iglesias, Sabel; Guntín-García, Maite; Carro-Fernández, Pilar; Llorente-Pendás, José Luis

    2016-01-01

    Conventional audiometry is the gold standard for quantifying and describing hearing loss. Alternative methods become necessary to assess subjects who are too young to respond reliably. Auditory evoked potentials constitute the most widely used method for determining hearing thresholds objectively; however, this stimulus is not frequency specific. The advent of the auditory steady-state response (ASSR) leads to more specific threshold determination. The current study describes and compares ASSR, auditory brainstem response (ABR) and conventional behavioural tone audiometry thresholds in a group of infants with various degrees of hearing loss. A comparison was made between ASSR, ABR and behavioural hearing thresholds in 35 infants detected in the neonatal hearing screening program. Mean difference scores (±SD) between ABR and high frequency ABR thresholds were 11.2 dB (±13) and 10.2 dB (±11). Pearson correlations between the ASSR and audiometry thresholds were 0.80 and 0.91 (500Hz); 0.84 and 0.82 (1000Hz); 0.85 and 0.84 (2000Hz); and 0.83 and 0.82 (4000Hz). The ASSR technique is a valuable extension of the clinical test battery for hearing-impaired children. Copyright © 2015 Elsevier España, S.L.U. and Sociedad Española de Otorrinolaringología y Cirugía de Cabeza y Cuello. All rights reserved.

  18. Decomposition of toluene in a steady-state atmospheric-pressure glow discharge

    Science.gov (United States)

    Trushkin, A. N.; Grushin, M. E.; Kochetov, I. V.; Trushkin, N. I.; Akishev, Yu. S.

    2013-02-01

    Results are presented from experimental studies of decomposition of toluene (C6H5CH3) in a polluted air flow by means of a steady-state atmospheric pressure glow discharge at different water vapor contents in the working gas. The experimental results on the degree of C6H5CH3 removal are compared with the results of computer simulations conducted in the framework of the developed kinetic model of plasma chemical decomposition of toluene in the N2: O2: H2O gas mixture. A substantial influence of the gas flow humidity on toluene decomposition in the atmospheric pressure glow discharge is demonstrated. The main mechanisms of the influence of humidity on C6H5CH3 decomposition are determined. The existence of two stages in the process of toluene removal, which differ in their duration and the intensity of plasma chemical decomposition of C6H5CH3 is established. Based on the results of computer simulations, the composition of the products of plasma chemical reactions at the output of the reactor is analyzed as a function of the specific energy deposition and gas flow humidity. The existence of a catalytic cycle in which hydroxyl radical OH acts a catalyst and which substantially accelerates the recombination of oxygen atoms and suppression of ozone generation when the plasma-forming gas contains water vapor is established.

  19. Self-consistent modeling of CFETR baseline scenarios for steady-state operation

    Science.gov (United States)

    Chen, Jiale; Jian, Xiang; Chan, Vincent S.; Li, Zeyu; Deng, Zhao; Li, Guoqiang; Guo, Wenfeng; Shi, Nan; Chen, Xi; CFETR Physics Team

    2017-07-01

    Integrated modeling for core plasma is performed to increase confidence in the proposed baseline scenario in the 0D analysis for the China Fusion Engineering Test Reactor (CFETR). The steady-state scenarios are obtained through the consistent iterative calculation of equilibrium, transport, auxiliary heating and current drives (H&CD). Three combinations of H&CD schemes (NB + EC, NB + EC + LH, and EC + LH) are used to sustain the scenarios with q min > 2 and fusion power of ˜70-150 MW. The predicted power is within the target range for CFETR Phase I, although the confinement based on physics models is lower than that assumed in 0D analysis. Ideal MHD stability analysis shows that the scenarios are stable against n = 1-10 ideal modes, where n is the toroidal mode number. Optimization of RF current drive for the RF-only scenario is also presented. The simulation workflow for core plasma in this work provides a solid basis for a more extensive research and development effort for the physics design of CFETR.

  20. Objective detection of auditory steady-state evoked potentials based on mutual information.

    Science.gov (United States)

    Bidelman, Gavin M; Bhagat, Shaum P

    2016-01-01

    Recently, we developed a metric to objectively detect human auditory evoked potentials based on the mutual information (MI) between neural responses and stimulus spectrograms. Here, the MI algorithm is evaluated further for validity in testing the auditory steady-state response (ASSR), a sustained potential used in objective audiometry. MI was computed between spectrograms of ASSRs and their evoking stimuli to quantify the shared time-frequency information between neuroelectric activity and stimulus acoustics. MI was compared against two traditional ASSR detection metrics: F-test and magnitude-squared coherence (MSC). Using an empirically derived threshold (⊖MI=1.45), MI was applied as a binary classifier to distinguish actual biological responses recorded in human participants (n=11) from sham recordings, containing only EEG noise (i.e., non-stimulus-control condition). MI achieved high overall accuracy (>90%) in identifying true ASSRs from sham recordings, with true positive/true negative rates of 82/100%. During online averaging, comparison with two other indices (F-test, MSC) indicated that MI could detect ASSRs in roughly half the number of trials (i.e., ∼400 sweeps) as the MSC and performed comparably to the F-test, but showed slightly better signal detection performance. MI provides an alternative, more flexible metric for efficient and automated ASSR detection.

  1. The Elicitation of Audiovisual Steady-State Responses: Multi-Sensory Signal Congruity and Phase Effects

    Science.gov (United States)

    Rhone, Ariane E.; Idsardi, William J.; Simon, Jonathan Z.; Poeppel, David

    2013-01-01

    Most ecologically natural sensory inputs are not limited to a single modality. While it is possible to use real ecological materials as experimental stimuli to investigate the neural basis of multi-sensory experience, parametric control of such tokens is limited. By using artificial bimodal stimuli composed of approximations to ecological signals, we aim to observe the interactions between putatively relevant stimulus attributes. Here we use MEG as an electrophysiological tool and employ as a measure the steady-state response (SSR), an experimental paradigm typically applied to unimodal signals. In this experiment we quantify the responses to a bimodal audio-visual signal with different degrees of temporal (phase) congruity, focusing on stimulus properties critical to audiovisual speech. An amplitude modulated auditory signal (‘pseudo-speech’) is paired with a radius-modulated ellipse (‘pseudo-mouth’), with the envelope of low-frequency modulations occurring in phase or at offset phase values across modalities. We observe (i) that it is possible to elicit an SSR to bimodal signals; (ii) that bimodal signals exhibit greater response power than unimodal signals; and (iii) that the SSR power at specific harmonics and sensors differentially reflects the congruity between signal components. Importantly, we argue that effects found at the modulation frequency and second harmonic reflect differential aspects of neural coding of multisensory signals. The experimental paradigm facilitates a quantitative characterization of properties of multi-sensory speech and other bimodal computations. PMID:21380858

  2. Comparative study between pure tone audiometry and auditory steady-state responses in normal hearing subjects.

    Science.gov (United States)

    Beck, Roberto Miquelino de Oliveira; Ramos, Bernardo Faria; Grasel, Signe Schuster; Ramos, Henrique Faria; Moraes, Maria Flávia Bonadia B de; Almeida, Edigar Rezende de; Bento, Ricardo Ferreira

    2014-01-01

    Auditory steady-state responses (ASSR) are an important tool to detect objectively frequency-specific hearing thresholds. Pure-tone audiometry is the gold-standard for hearing evaluation, although sometimes it may be inconclusive, especially in children and uncooperative adults. Compare pure tone thresholds (PT) with ASSR thresholds in normal hearing subjects. In this prospective cross-sectional study we included 26 adults (n = 52 ears) of both genders, without any hearing complaints or otologic diseases and normal puretone thresholds. All subjects had clinical history, otomicroscopy, audiometry and immitance measurements. This evaluation was followed by the ASSR test. The mean pure-tone and ASSR thresholds for each frequency were calculated. The mean difference between PTand ASSR thresholdswas 7,12 for 500 Hz, 7,6 for 1000 Hz, 8,27 for 2000 Hz and 9,71 dB for 4000 Hz. There were no difference between PT and ASSR means at either frequency. ASSR thresholds were comparable to pure-tone thresholds in normal hearing adults. Nevertheless it should not be used as the only method of hearing evaluation.

  3. Face-evoked steady-state visual potentials: effects of presentation rate and face inversion.

    Science.gov (United States)

    Gruss, L Forest; Wieser, Matthias J; Schweinberger, Stefan R; Keil, Andreas

    2012-01-01

    Face processing can be explored using electrophysiological methods. Research with event-related potentials has demonstrated the so-called face inversion effect, in which the N170 component is enhanced in amplitude and latency to inverted, compared to upright, faces. The present study explored the extent to which repetitive lower-level visual cortical engagement, reflected in flicker steady-state visual evoked potentials (ssVEPs), shows similar amplitude enhancement to face inversion. We also asked if inversion-related ssVEP modulation would be dependent on the stimulation rate at which upright and inverted faces were flickered. To this end, multiple tagging frequencies were used (5, 10, 15, and 20 Hz) across two studies (n = 21, n = 18). Results showed that amplitude enhancement of the ssVEP for inverted faces was found solely at higher stimulation frequencies (15 and 20 Hz). By contrast, lower frequency ssVEPs did not show this inversion effect. These findings suggest that stimulation frequency affects the sensitivity of ssVEPs to face inversion.

  4. Uncertainty analysis of steady state incident heat flux measurements in hydrocarbon fuel fires.

    Energy Technology Data Exchange (ETDEWEB)

    Nakos, James Thomas

    2005-12-01

    The objective of this report is to develop uncertainty estimates for three heat flux measurement techniques used for the measurement of incident heat flux in a combined radiative and convective environment. This is related to the measurement of heat flux to objects placed inside hydrocarbon fuel (diesel, JP-8 jet fuel) fires, which is very difficult to make accurately (e.g., less than 10%). Three methods will be discussed: a Schmidt-Boelter heat flux gage; a calorimeter and inverse heat conduction method; and a thin plate and energy balance method. Steady state uncertainties were estimated for two types of fires (i.e., calm wind and high winds) at three times (early in the fire, late in the fire, and at an intermediate time). Results showed a large uncertainty for all three methods. Typical uncertainties for a Schmidt-Boelter gage ranged from {+-}23% for high wind fires to {+-}39% for low wind fires. For the calorimeter/inverse method the uncertainties were {+-}25% to {+-}40%. The thin plate/energy balance method the uncertainties ranged from {+-}21% to {+-}42%. The 23-39% uncertainties for the Schmidt-Boelter gage are much larger than the quoted uncertainty for a radiative only environment (i.e ., {+-}3%). This large difference is due to the convective contribution and because the gage sensitivities to radiative and convective environments are not equal. All these values are larger than desired, which suggests the need for improvements in heat flux measurements in fires.

  5. Three Unique Interstitial Macrophages in the Murine Lung at Steady State.

    Science.gov (United States)

    Gibbings, Sophie L; Thomas, Stacey M; Atif, Shaikh M; McCubbrey, Alexandra L; Desch, A Nicole; Danhorn, Thomas; Leach, Sonia M; Bratton, Donna L; Henson, Peter M; Janssen, William J; Jakubzick, Claudia V

    2017-07-01

    The current paradigm in macrophage biology is that some tissues mainly contain macrophages from embryonic origin, such as microglia in the brain, whereas other tissues contain postnatal-derived macrophages, such as the gut. However, in the lung and in other organs, such as the skin, there are both embryonic and postnatal-derived macrophages. In this study, we demonstrate in the steady-state lung that the mononuclear phagocyte system is comprised of three newly identified interstitial macrophages (IMs), alveolar macrophages, dendritic cells, and few extravascular monocytes. We focused on similarities and differences between the three IM subtypes, specifically, their phenotype, location, transcriptional signature, phagocytic capacity, turnover, and lack of survival dependency on fractalkine receptor, CX3CR1. Pulmonary IMs were located in the bronchial interstitium but not the alveolar interstitium. At the transcriptional level, all three IMs displayed a macrophage signature and phenotype. All IMs expressed MER proto-oncogene, tyrosine kinase, CD64, CD11b, and CX3CR1, and were further distinguished by differences in cell surface protein expression of CD206, Lyve-1, CD11c, CCR2, and MHC class II, along with the absence of Ly6C, Ly6G, and Siglec F. Most intriguingly, in addition to the lung, similar phenotypic populations of IMs were observed in other nonlymphoid organs, perhaps highlighting conserved functions throughout the body. These findings promote future research to track four distinct pulmonary macrophages and decipher the division of labor that exists between them.

  6. Pemodelan Gerak Belok Steady State dan Transient pada Kendaraan Empat Roda

    Directory of Open Access Journals (Sweden)

    Yansen Prayitno

    2017-01-01

    Full Text Available Kemajuan pesat di bidang industri kendaraan harus diimbangi oleh kemajuan ilmu pengetahuan bidang otomotif, khususnya pada bidang simulasi dinamika kendaraan. Hasil simulasi dari pemodelan dinamika kendaraan dapat digunakan untuk mengetahui respon dan karakteristik kendaraan  terhadap perintah pengendara maupun gangguan jalan. Untuk melakukan simulasi tersebut, dibutuhkan sebuah model dinamis yang dapat merepresentasikan sebuah kendaraan, dimana model tersebut tersusun dari persamaan-persamaan matematis yang bersesuaian. Pada tugas akhir ini dilakukan pemodelan gerak belok kendaraan empat roda, dengan menggunakan jenis pemodelan kendaraan single-track. Gerak belok kendaraan dianalisa pada dua kondisi, yaitu kondisi steady-state dan transient. Input dari model dinamis yang dibuat adalah nilai dari parameter kendaraan (meliputi massa, inersia, letak pusat massa, dan kekakuan belok ban, kecepatan kendaraan konstan, dan sudut kemudi roda depan. Model dinamis gerak belok kendaraan yang telah dibuat dapat menampilkan karakteristik kemudi kendaraan (understeer, neutralsteer, dan oversteer, grafik respon variabel gerak belok kendaraan (radius belok, yaw rate, dan sudut slip, besarnya kecepatan kritis kendaraan, serta visualisasi lintasan belok kendaraan. Hasil simulasi model dinamis kendaraan telah sesuai bila merujuk dari penelitian model single-track dan mempunyai ketidaksesuaian 30-60% jika dibandingkan dengan penelitian model twin-track.

  7. Steady State Assessment of Shunt Compensated EHV Insulated Cables by Means of Multiconductor Cell Analysis (MCA

    Directory of Open Access Journals (Sweden)

    Roberto Benato

    2012-01-01

    Full Text Available The author has already presented some papers which allow studying cable systems by means of the multiconductor cell analysis (MCA. This method considers the cable system in its real asymmetry without simplified and approximated hypotheses. The multiconductor matrix procedure based on the use of admittance matrices, which account for the line cells (with earth return currents, different types of screen bonding, possible multiple circuits (single and double circuit or more, allows predicting the steady-state regime of any cable system. In the previous papers, these matrix algorithms have been presented with reference to a short extra-high voltage (EHV double-circuit cross-bonded (CB underground cable (UGC system. Since the cable link was short, the shunt reactive compensation was not necessary and consequently not considered. In this paper the procedure is generalized in order to take into account three single-phase (or also one three-phase reactors installed at the cable ends or also at intermediate locations.

  8. A lower limb exoskeleton control system based on steady state visual evoked potentials

    Science.gov (United States)

    Kwak, No-Sang; Müller, Klaus-Robert; Lee, Seong-Whan

    2015-10-01

    Objective. We have developed an asynchronous brain-machine interface (BMI)-based lower limb exoskeleton control system based on steady-state visual evoked potentials (SSVEPs). Approach. By decoding electroencephalography signals in real-time, users are able to walk forward, turn right, turn left, sit, and stand while wearing the exoskeleton. SSVEP stimulation is implemented with a visual stimulation unit, consisting of five light emitting diodes fixed to the exoskeleton. A canonical correlation analysis (CCA) method for the extraction of frequency information associated with the SSVEP was used in combination with k-nearest neighbors. Main results. Overall, 11 healthy subjects participated in the experiment to evaluate performance. To achieve the best classification, CCA was first calibrated in an offline experiment. In the subsequent online experiment, our results exhibit accuracies of 91.3 ± 5.73%, a response time of 3.28 ± 1.82 s, an information transfer rate of 32.9 ± 9.13 bits/min, and a completion time of 1100 ± 154.92 s for the experimental parcour studied. Significance. The ability to achieve such high quality BMI control indicates that an SSVEP-based lower limb exoskeleton for gait assistance is becoming feasible.

  9. Measurement of tissue-radiation dosage using a thermal steady-state elastic shear wave.

    Science.gov (United States)

    Chang, Sheng-Yi; Hsieh, Tung-Sheng; Chen, Wei-Ru; Chen, Jin-Chung; Chou, Chien

    2017-08-01

    A biodosimeter based on thermal-induced elastic shear wave (TIESW) in silicone acellular porcine dermis (SAPD) at thermal steady state has been proposed and demonstrated. A square slab SAPD treated with ionizing radiation was tested. The SAPD becomes a continuous homogeneous and isotropic viscoelastic medium due to the generation of randomly coiled collagen fibers formed from their bundle-like structure in the dermis. A harmonic TIESW then propagates on the surface of the SAPD as measured by a nanometer-scaled strain-stress response under thermal equilibrium conditions at room temperature. TIESW oscillation frequency was noninvasively measured in real time by monitoring the transverse displacement of the TIESW on the SAPD surface. Because the elastic shear modulus is highly sensitive to absorbed doses of ionizing radiation, this proposed biodosimeter can become a highly sensitive and noninvasive method for quantitatively determining tissue-absorbed dosage in terms of TIESW’s oscillation frequency. Detection sensitivity at 1 cGy and dynamic ranges covering 1 to 40 cGy and 80 to 500 cGy were demonstrated.

  10. FRAPCON-1: a computer code for the steady state analysis of oxide fuel rods

    Energy Technology Data Exchange (ETDEWEB)

    Berna, G. A.; Bohn, M. P.; Coleman, D. R.; Lanning, D. D.

    1978-08-01

    FRAPCON is a FORTRAN IV computer code which predicts the steady state long-term burnup response of a light water reactor fuel rod. The coupled effects of fuel and cladding deformation, temperature, and internal gas pressure on the behavior of the fuel rod are considered in determining fuel rod response. The cladding deformation model includes multi-axial, elasto-plastic analysis and considers both primary and secondary creep. The fuel temperature model considers the effects of fuel cracking and relocation in determining the fuel temperature distribution. Burnup dependent fission gas generation and release is included in calculating fuel rod internal pressure. An integral fuel rod failure subcode determines failure and failure modes based on the operating conditions at each timestep. The material property subcode, MATPRO, provides gas, fuel and cladding properties to the computational subcodes in FRAPCON. No material properties need to be supplied by the code user. FRAPCON is a completely modular code with each major computational subcode isolated within the code and coupled to the main code by subroutine calls and data transfer through argument lists. FRAPCON is soft-coupled to the transient fuel rod code, FRAP-T, to provide initial conditions to initiate analysis of such off-normal transients as a loss-of-coolant accident. The code is presently programmed and running on a CDC 7600 computer.

  11. Quasi-steady-state analysis of two-dimensional random intermittent search processes

    KAUST Repository

    Bressloff, Paul C.

    2011-06-01

    We use perturbation methods to analyze a two-dimensional random intermittent search process, in which a searcher alternates between a diffusive search phase and a ballistic movement phase whose velocity direction is random. A hidden target is introduced within a rectangular domain with reflecting boundaries. If the searcher moves within range of the target and is in the search phase, it has a chance of detecting the target. A quasi-steady-state analysis is applied to the corresponding Chapman-Kolmogorov equation. This generates a reduced Fokker-Planck description of the search process involving a nonzero drift term and an anisotropic diffusion tensor. In the case of a uniform direction distribution, for which there is zero drift, and isotropic diffusion, we use the method of matched asymptotics to compute the mean first passage time (MFPT) to the target, under the assumption that the detection range of the target is much smaller than the size of the domain. We show that an optimal search strategy exists, consistent with previous studies of intermittent search in a radially symmetric domain that were based on a decoupling or moment closure approximation. We also show how the decoupling approximation can break down in the case of biased search processes. Finally, we analyze the MFPT in the case of anisotropic diffusion and find that anisotropy can be useful when the searcher starts from a fixed location. © 2011 American Physical Society.

  12. Direct numerical simulation of steady state, three dimensional, laminar flow around a wall mounted cube

    Science.gov (United States)

    Liakos, Anastasios; Malamataris, Nikolaos

    2014-11-01

    The topology and evolution of flow around a surface mounted cubical object in three dimensional channel flow is examined for low to moderate Reynolds numbers. Direct numerical simulations were performed via a home made parallel finite element code. The computational domain has been designed according to actual laboratory experimental conditions. Analysis of the results is performed using the three dimensional theory of separation. Our findings indicate that a tornado-like vortex by the side of the cube is present for all Reynolds numbers for which flow was simulated. A horse-shoe vortex upstream from the cube was formed at Reynolds number approximately 1266. Pressure distributions are shown along with three dimensional images of the tornado-like vortex and the horseshoe vortex at selected Reynolds numbers. Finally, and in accordance to previous work, our results indicate that the upper limit for the Reynolds number for which steady state results are physically realizable is roughly 2000. Financial support of author NM from the Office of Naval Research Global (ONRG-VSP, N62909-13-1-V016) is acknowledged.

  13. From steady-state to synchronized yeast glycolytic oscillations I: model construction.

    Science.gov (United States)

    du Preez, Franco B; van Niekerk, David D; Kooi, Bob; Rohwer, Johann M; Snoep, Jacky L

    2012-08-01

    An existing detailed kinetic model for the steady-state behavior of yeast glycolysis was tested for its ability to simulate dynamic behavior. Using a small subset of experimental data, the original model was adapted by adjusting its parameter values in three optimization steps. Only small adaptations to the original model were required for realistic simulation of experimental data for limit-cycle oscillations. The greatest changes were required for parameter values for the phosphofructokinase reaction. The importance of ATP for the oscillatory mechanism and NAD(H) for inter-and intra-cellular communications and synchronization was evident in the optimization steps and simulation experiments. In an accompanying paper [du Preez F et al. (2012) FEBS J279, 2823-2836], we validate the model for a wide variety of experiments on oscillatory yeast cells. The results are important for re-use of detailed kinetic models in modular modeling approaches and for approaches such as that used in the Silicon Cell initiative. The mathematical models described here have been submitted to the JWS Online Cellular Systems Modelling Database and can be accessed at http://jjj.biochem.sun.ac.za/database/dupreez/index.html. © 2012 The Authors Journal compilation © 2012 FEBS.

  14. From steady-state to synchronized yeast glycolytic oscillations II: model validation.

    Science.gov (United States)

    du Preez, Franco B; van Niekerk, David D; Snoep, Jacky L

    2012-08-01

    In an accompanying paper [du Preez et al., (2012) FEBS J279, 2810-2822], we adapt an existing kinetic model for steady-state yeast glycolysis to simulate limit-cycle oscillations. Here we validate the model by testing its capacity to simulate a wide range of experiments on dynamics of yeast glycolysis. In addition to its description of the oscillations of glycolytic intermediates in intact cells and the rapid synchronization observed when mixing out-of-phase oscillatory cell populations (see accompanying paper), the model was able to predict the Hopf bifurcation diagram with glucose as the bifurcation parameter (and one of the bifurcation points with cyanide as the bifurcation parameter), the glucose- and acetaldehyde-driven forced oscillations, glucose and acetaldehyde quenching, and cell-free extract oscillations (including complex oscillations and mixed-mode oscillations). Thus, the model was compliant, at least qualitatively, with the majority of available experimental data for glycolytic oscillations in yeast. To our knowledge, this is the first time that a model for yeast glycolysis has been tested against such a wide variety of independent data sets. The mathematical models described here have been submitted to the JWS Online Cellular Systems Modelling Database and can be accessed at http://jjj.biochem.sun.ac.za/database/dupreez/index.html. © 2012 The Authors Journal compilation © 2012 FEBS.

  15. Rapid multicomponent relaxometry in steady state with correction of magnetization transfer effects.

    Science.gov (United States)

    Liu, Fang; Block, Walter F; Kijowski, Richard; Samsonov, Alexey

    2016-04-01

    To study the effects of magnetization transfer (MT) on multicomponent T2 parameters obtained using mcDESPOT in macromolecule-rich tissues and to propose a new method called mcRISE to correct MT-induced biases. The two-pool mcDESPOT model was modified by the addition of an exchanging macromolecule proton pool to model the MT effect in cartilage. The mcRISE acquisition scheme was developed to provide sensitivity to all pools. An incremental fitting was applied to estimate MT and relaxometry parameters with minimized coupling. The interaction between MT and relaxometry parameters, efficacy of MT correction, and feasibility of mcRISE in vivo were investigated in simulations and in healthy volunteers. The MT effect caused significant errors in multicomponent T1/T2 values and in fast-relaxing water fraction fF , which is consistent with previous experimental observations. fF increased significantly with macromolecule content if MT was ignored. mcRISE resulted in a multifold reduction of MT biases and yielded decoupled multicomponent T1/T2 relaxometry and quantitative MT parameters. mcRISE is an efficient approach for correcting MT biases in multicomponent relaxometry based on steady state sequences. Improved specificity of mcRISE may help to elucidate the sources of the previously described high sensitivity of noncorrected mcDESPOT parameters to disease-related changes in cartilage and the brain. © 2015 Wiley Periodicals, Inc.

  16. Development of MARS-LMR and Steady-state Calculation for KALIMER-600

    Energy Technology Data Exchange (ETDEWEB)

    Ha, K. S.; Jeong, H. Y.; Chang, W. P.; Lee, Y. B.; Jo, C. H

    2007-05-15

    MARS code which has been developed by coupling the RELAP and COBRA-TF in Korea Atomic Energy Research Institute has been improved in the aspects of hydraulically multi-dimensional modeling and data processing of common block using a dynamic memory allocation of FORTRAN. To use the code in the area of safety analysis of liquid metal reactor, several parts of the code have to be improved further. (1) Sodium property table including dynamic properties, such as, conductivity and viscosity, was generated to fit for the MARS code. (2) The heat transfer correlations for the liquid metal were implemented in the code. (3) The models describing the flow resistance by wire-wrap spacer in the core of LMR were applied. A MARS input data for KALIMER-600 is generated and steady-state calculation at the rated power is successfully performed. The input data can be used as a base input deck for the various transient analysis of a of PHTS, IHTS, and Tertiary system with minor revision of initial conditions and control system models.

  17. Whole heart magnetization-prepared steady-state free precession coronary vein MRI.

    Science.gov (United States)

    Stoeck, Christian T; Han, Yuchi; Peters, Dana C; Hu, Peng; Yeon, Susan B; Kissinger, Kraig V; Goddu, Beth; Goepfert, Lois; Manning, Warren J; Kozerke, Sebastian; Nezafat, Reza

    2009-06-01

    To compare two coronary vein imaging techniques using whole-heart balanced steady-state free precession (SSFP) and a targeted double-oblique spoiled gradient-echo (GRE) sequences in combination with magnetization transfer (MT) preparation sequence for tissue contrast improvement. Nine healthy subjects were imaged with the proposed technique. The results are compared with optimized targeted MT prepared GRE acquisitions. Both quantitative and qualitative analyses were performed to evaluate each imaging method. Whole-heart images were successfully acquired with no visible image artifact in the vicinity of the coronary veins. The anatomical features and visual grading of both techniques were comparable. However, the targeted small slab acquisition of the left ventricular lateral wall was superior to whole-heart acquisition for visualization of relevant information for cardiac resynchronization therapy (CRT) lead implantation. We demonstrated the feasibility of whole-heart coronary vein MRI using a 3D MT-SSFP imaging sequence. A targeted acquisition along the lateral left ventricular wall is preferred for visualization of branches commonly used in CRT lead implantation.

  18. Steady-State Thermal Properties of Rectangular Straw-Bales (RSB for Building

    Directory of Open Access Journals (Sweden)

    Leonardo Conti

    2016-10-01

    Full Text Available Straw is an inevitable product of cereal production and is available in huge quantities in the world. In order to use straw-bales as a building material, the characteristic values of the thermal performances should be determined. To not lose the benefits of the cheapness and sustainability of the material, the characteristics must be determined with simple and inexpensive means and procedures. This research aims to implement tools and methods focused at the determination of the thermal properties of straw-bales. For this study, the guidelines dictated by ASTM and ISO were followed. A measurement system consisting of a Metering Chamber (MC was realized. The MC was placed inside a Climate Chamber (CC. During the test, a known quantity of energy is introduced inside MC. When the steady-state is reached, all the energy put into MC passes through its walls in CC, where it is absorbed by the air-conditioner. A series of thermopiles detect the temperature of the surfaces of the measurement system and of the specimen. Determining the amount of energy transmitted by the various parts of MC and by the specimen, it is possible to apply Fourier’s law to calculate the thermal conductivity of the specimen.

  19. Plasma flow reactor for steady state monitoring of physical and chemical processes at high temperatures

    Science.gov (United States)

    Koroglu, Batikan; Mehl, Marco; Armstrong, Michael R.; Crowhurst, Jonathan C.; Weisz, David G.; Zaug, Joseph M.; Dai, Zurong; Radousky, Harry B.; Chernov, Alex; Ramon, Erick; Stavrou, Elissaios; Knight, Kim; Fabris, Andrea L.; Cappelli, Mark A.; Rose, Timothy P.

    2017-09-01

    We present the development of a steady state plasma flow reactor to investigate gas phase physical and chemical processes that occur at high temperature (1000 < T < 5000 K) and atmospheric pressure. The reactor consists of a glass tube that is attached to an inductively coupled argon plasma generator via an adaptor (ring flow injector). We have modeled the system using computational fluid dynamics simulations that are bounded by measured temperatures. In situ line-of-sight optical emission and absorption spectroscopy have been used to determine the structures and concentrations of molecules formed during rapid cooling of reactants after they pass through the plasma. Emission spectroscopy also enables us to determine the temperatures at which these dynamic processes occur. A sample collection probe inserted from the open end of the reactor is used to collect condensed materials and analyze them ex situ using electron microscopy. The preliminary results of two separate investigations involving the condensation of metal oxides and chemical kinetics of high-temperature gas reactions are discussed.

  20. Using Auditory Steady-State Responses for Measuring Hearing Protector Attenuation

    Directory of Open Access Journals (Sweden)

    Olivier Valentin

    2017-01-01

    Full Text Available Introduction: Present methods of measuring the attenuation of hearing protection devices (HPDs have limitations. Objective measurements such as field microphone in real-ear do not assess bone-conducted sound. Psychophysical measurements such as real-ear attenuation at threshold (REAT are biased due to the low frequency masking effects from test subjects’ physiological noise and the variability of measurements based on subjective responses. An auditory steady-state responses (ASSRs procedure is explored as a technique which might overcome these limitations. Subjects and Methods: Pure tone stimuli (500 and 1000 Hz, amplitude modulated at 40 Hz, are presented to 10 normal-hearing adults through headphones at three levels in 10 dB steps. Two conditions were assessed: unoccluded ear canal and occluded ear canal. ASSR amplitude data as a function of the stimulation level are linearized using least-square regressions. The “physiological attenuation” is then calculated as the average difference between the two measurements. The technical feasibility of measuring earplug attenuation is demonstrated for the group average attenuation across subjects. Results: No significant statistical difference is found between the average REAT attenuation and the average ASSR-based attenuation. Conclusion: Feasibility is not yet demonstrated for individual subjects since differences between the estimates occurred for some subjects.

  1. Hydrodynamics of steady state phloem transport with radial leakage of solute

    Science.gov (United States)

    Cabrita, Paulo; Thorpe, Michael; Huber, Gregor

    2013-01-01

    Long-distance phloem transport occurs under a pressure gradient generated by the osmotic exchange of water associated with solute exchange in source and sink regions. But these exchanges also occur along the pathway, and yet their physiological role has almost been ignored in mathematical models of phloem transport. Here we present a steady state model for transport phloem which allows solute leakage, based on the Navier-Stokes and convection-diffusion equations which describe fluid motion rigorously. Sieve tube membrane permeability Ps for passive solute exchange (and correspondingly, membrane reflection coefficient) influenced model results strongly, and had to lie in the bottom range of the values reported for plant cells for the results to be realistic. This smaller permeability reflects the efficient specialization of sieve tube elements, minimizing any diffusive solute loss favored by the large concentration difference across the sieve tube membrane. We also found there can be a specific reflection coefficient for which pressure profiles and sap velocities can both be similar to those predicted by the Hagen-Poiseuille equation for a completely impermeable tube. PMID:24409189

  2. Modelling of PEM Fuel Cell Performance: Steady-State and Dynamic Experimental Validation

    Directory of Open Access Journals (Sweden)

    Idoia San Martín

    2014-02-01

    Full Text Available This paper reports on the modelling of a commercial 1.2 kW proton exchange membrane fuel cell (PEMFC, based on interrelated electrical and thermal models. The electrical model proposed is based on the integration of the thermodynamic and electrochemical phenomena taking place in the FC whilst the thermal model is established from the FC thermal energy balance. The combination of both models makes it possible to predict the FC voltage, based on the current demanded and the ambient temperature. Furthermore, an experimental characterization is conducted and the parameters for the models associated with the FC electrical and thermal performance are obtained. The models are implemented in Matlab Simulink and validated in a number of operating environments, for steady-state and dynamic modes alike. In turn, the FC models are validated in an actual microgrid operating environment, through the series connection of 4 PEMFC. The simulations of the models precisely and accurately reproduce the FC electrical and thermal performance.

  3. Applications of an implicit HLLC-based Godunov solver for steady state hypersonic problems

    Energy Technology Data Exchange (ETDEWEB)

    Link, R.A.; Sharman, B. [Martec Limited, Halifax, Nova Scotia (Canada)]. E-mail: rickl@martec.com

    2005-07-01

    Over the past few years, there has been considerable activity developing research vehicles for studying hypersonic propulsion. Successful launches of the Australian Hyshot and the US Hyper-X vehicles have added a significant amount of flight test data to a field that had previously been limited to numerical simulation. A number of approaches have been proposed for hypersonics propulsion, including attached detonation wave, supersonics combustion, and shock induced combustion. Due to the high cost of developing flight hardware, CFD simulations will continue to be a key tool for investigating the feasibility of these concepts. Capturing the interactions of the vehicle body with the boundary layer and chemical reactions pushes the limits of available modelling tools and computer hardware. Explicit formulations are extremely slow in converging to a steady state; therefore, the use of implicit methods are warranted. An implicit LLC-based Godunov solver has been developed at Martec in collaboration with DRDC Valcartier to solve hypersonic problems with a minimum of CPU time and RAM storage. The solver, Chinook Implicit, is based upon the implicit formulation adopted by Batten et. al. The solver is based on a point implicit Gauss-Seidel method for unstructured grids, and includes fully implicit boundary conditions. Preliminary results for small and large scale inviscid hypersonics problems will be presented. (author)

  4. Determining the Impact of Steady-State PV Fault Current Injections on Distribution Protection

    Energy Technology Data Exchange (ETDEWEB)

    Seuss, John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Reno, Matthew J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Broderick, Robert Joseph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Grijalva, Santiago [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-05-01

    This report investigates the fault current contribution from a single large PV system and the impact it has on existing distribution overcurrent protection devices. Assumptions are made about the modeling of the PV system under fault to perform exhaustive steady - state fault analyses throughout distribution feeder models. Each PV interconnection location is tested to determine how the size of the PV system affects the fault current measured by each protection device. This data is then searched for logical conditions that indicate whether a protection device has operated in a manner that will cause more customer outages due to the addition of the PV system. This is referred to as a protection issue , and there are four unique types of issues that have been identified in the study. The PV system size at which any issues occur are recorded to determine the feeder's PV hosting capacity limitations due to interference with protection settings. The analysis is carried out on six feeder models. The report concludes with a discussion of the prevalence and cause of each protection issue caused by PV system fault current.

  5. Darwin and the geological controversies over the steady-state worldview in the 1830s.

    Science.gov (United States)

    Gohau, Gabriel

    2014-01-01

    In the first part of this paper, I will show that although Darwin's geological works only covered the first years of his scientific career, these played a non-negligible role in the earth sciences of the mid-nineteenth century. His intellectual proximity with Charles Lyell often made him his disciple. This is indeed the case with respect to debates over 'gradual' soil movements and 'catastrophic' soil movements, and for 'steady-state' cycles as opposed to 'directionalistic' ones. This being said, it is also true that in South America Darwin saw geological processes which were incompatible with Lyell's explanations. It must therefore be recognized that Darwin held a middle-of-the-road position between uniformitarianism (Lyell) and catastrophism (Humbolt and von Buch), at least as far as some geological questions were concerned. In the second part of the paper, debates on geological issues during Darwin's active years will be put in the methodological context of the Scientific Revolution of the seventeenth century. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. From steady-state to climatically driven denudation across the Central Andes - SE Peru

    Science.gov (United States)

    Ruiz, G.; Carlotto, V.; Andriessen, P.

    2009-04-01

    To better constrain the orogenic growth of the Andean chain, we investigated the time-Temperature paths of bedrocks from the two morpho-structural highs of the Central Andes that are separated by the vanishing Altiplano, i.e. the Eastern and Western Cordilleras of SE Peru. The Western Cordillera is a volcanic to volcano-detrital chain that developed ~40-35 Ma ago and is characterized by a 4000m high mean altitude whose origin is poorly constrained. Fission-Track data on apatite and zircon crystals extracted from an Eocene pluton yield ages comprised between 24 and 14 Ma, and 38 and 30 Ma respectively. One of the noteworthy aspects of the data is that analyses reveal a steady-state phase of exhumation from the late Eocene to at least the middle Miocene (38-14 Ma) with no disruption of the exhumation path since 38 Ma either by sedimentary burial and/or rapid exhumation. The uplift of the Western Cordillera was thus probably steady since, avoiding the deposition of foreland basin sequences as in the Altiplano region. Further east, Apatite Fission-Track ages are much younger and range between 7.6 and 2.5 Ma for the Eastern Cordillera and between 11.2 and 1.5 Ma for the Sub-Andean Zone. Age-altitude relationships suggest that denudation increased from a more quiescent Late Miocene period to a high rate of 0.8 km/my for the Pliocene. Such abrupt change is supported by a net in sediment accumulation rates in the Andean Amazon Basin but as far as offshore the Amazon fan. A global climate change is usually invoked for high Pliocene rates; however it post-dated a documented period of surface uplift in the Eastern Andes. Denudation patterns are much contrasted across the Andes of SE Peru. The western Cordillera, despite significant topography and deep river valleys in the studied area, still yield information that suggest a steady and slow uplift from the late Eocene until at least the middle Miocene. We thus propose a coupled scenario: first the Andean orographic barrier

  7. Free-breathing steady-state free precession cine cardiac magnetic resonance with respiratory navigator gating.

    Science.gov (United States)

    Moghari, Mehdi H; Komarlu, Rukmini; Annese, David; Geva, Tal; Powell, Andrew J

    2015-04-01

    To develop and validate a respiratory motion compensation method for free-breathing cardiac cine imaging. A free-breathing navigator-gated cine steady-state free precession acquisition (Cine-Nav) was developed which preserves the equilibrium state of the net magnetization vector, maintains the high spatial and temporal resolutions of standard breath-hold (BH) acquisition, and images entire cardiac cycle. Cine image data is accepted only from cardiac cycles occurring entirely during end-expiration. Prospective validation was performed in 10 patients by obtaining in each three complete ventricular image stacks with different respiratory motion compensation approaches: (1) BH, (2) free-breathing with 3 signal averages (3AVG), and (3) free-breathing with Cine-Nav. The subjective image quality score (1 = worst, 4 = best) for Cine-Nav (3.8 ± 0.4) was significantly better than for 3AVG (2.2 ± 0.5, P = 0.002), and similar to BH (4.0 ± 0.0, P = 0.13). The blood-to-myocardium contrast ratio for Cine-Nav (6.3 ± 1.5) was similar to BH (5.9 ± 1.6, P = 0.52) and to 3AVG (5.6 ± 2.5, P = 0.43). There were no significant differences between Cine-Nav and BH for the ventricular volumes and mass. In contrast, there were significant differences between 3AVG and BH in all of these measurements but right ventricular mass. Free-breathing cine imaging with Cine-Nav yielded comparable image quality and ventricular measurements to BH, and was superior to 3AVG. © 2014 Wiley Periodicals, Inc.

  8. Steady-state and time-dependent modelling of parallel transport in the scrape-off layer

    DEFF Research Database (Denmark)

    Havlickova, E.; Fundamenski, W.; Naulin, Volker

    2011-01-01

    temperature calculated in SOLF1D is compared with the approximative model used in the turbulence code ESEL both for steady-state and turbulent SOL. Dynamics of the parallel transport are investigated for a simple transient event simulating the propagation of particles and energy to the targets from a blob...

  9. A simple steady-state model for carry-over of aflatoxins from feed to cow's milk.

    NARCIS (Netherlands)

    Eijkeren, Jan C H van; Bakker, Martine I; Zeilmaker, Marco J

    2006-01-01

    A simple steady-state model is derived from two kinetic one-compartment models for the disposition of aflatoxin B1 (AFB1) and aflatoxin M1 (AFM1) in the lactating cow. The model relates daily intake of AFB1 in feed of dairy cattle and the cow's lactation status to resulting concentrations of AFM1 in

  10. [Study on balance group in steady-state extraction process of Chinese medicine and experimental verification to Houttuynia cordata].

    Science.gov (United States)

    Liu, Wenlong; Zhang, Xili; He, Fuyuan; Zhang, Ping; Wang, Haiqin; Wu, Dezhi; Chen, Zuohong

    2011-11-01

    To establish and experimental verification the mathematical model of the balance groups that is the steady-state of traditional Chinese medicine in extraction. Using the entropy and genetic principles of statistics, and taking the coefficient of variation of GC fingerprint which is the naphtha of the Houttuynia cordata between strains in the same GAP place as a pivot to establish and verify the mathematical model was established of the balance groups that is the steady-state of traditional Chinese medicine in extraction. A mathematical model that is suitable for the balance groups of the steady-state of traditional Chinese medicine and preparation in extraction, and the balance groups which is 29 683 strains (approximately 118.7 kg) were gained with the same origin of H. cordata as the model drug. Under the GAP of quality control model, controlling the stability of the quality through further using the Hardy-Weinberg balance groups of the H. cordata between strains, the new theory and experiment foundation is established for the steady-state of traditional Chinese medicine in extraction and quality control.

  11. EEG derivations providing auditory steady-state responses with high signal-to-noise ratios in infants.

    NARCIS (Netherlands)

    Reijden, C.S. van der; Mens, L.H.M.; Snik, A.F.M.

    2005-01-01

    OBJECTIVE: To identify EEG derivations that yield high signal-to-noise ratios (SNRs) of the auditory steady-state response (ASSR) in infants aged 0 to 5 months. DESIGN: The ASSR was recorded simultaneously from 10 EEG derivations in a monopolar montage in 20 sleeping infants. Stimuli were tones of

  12. Signal-to-noise ratios of the auditory steady-state response from fifty-five EEG derivations in adults.

    NARCIS (Netherlands)

    Reijden, C.S. van der; Mens, L.H.M.; Snik, A.F.M.

    2004-01-01

    The Auditory Steady-State Response (ASSR) was recorded in 20 awake adults with normal hearing on ten EEG channels simultaneously to find derivations with the best signal-to-noise ratios (SNRs). Stimuli were 20% frequency modulated tones of 0.5 and 2 kHz at 20 dB SL, 100% amplitude modulated at 90 or

  13. Reducing the allowable kinetic space by constructing ensemble of dynamic models with the same steady-state flux.

    Science.gov (United States)

    Tan, Yikun; Rivera, Jimmy G Lafontaine; Contador, Carolina A; Asenjo, Juan A; Liao, James C

    2011-01-01

    Dynamic models of metabolism are instrumental for gaining insight and predicting possible outcomes of perturbations. Current approaches start from the selection of lumped enzyme kinetics and determine the parameters within a large parametric space. However, kinetic parameters are often unknown and obtaining these parameters requires detailed characterization of enzyme kinetics. In many cases, only steady-state fluxes are measured or estimated, but these data have not been utilized to construct dynamic models. Here, we extend the previously developed Ensemble Modeling methodology by allowing various kinetic rate expressions and employing a more efficient solution method for steady states. We show that anchoring the dynamic models to the same flux reduces the allowable parameter space significantly such that sampling of high dimensional kinetic parameters becomes meaningful. The methodology enables examination of the properties of the model's structure, including multiple steady states. Screening of models based on limited steady-state fluxes or metabolite profiles reduces the parameter space further and the remaining models become increasingly predictive. We use both succinate overproduction and central carbon metabolism in Escherichia coli as examples to demonstrate these results. Published by Elsevier Inc.

  14. Steady state characteristics of a tilting pad journal bearing with controllable lubrication: Comparison between theoretical and experimental results

    DEFF Research Database (Denmark)

    Cerda Varela, Alejandro Javier; Nielsen, Bo Bjerregaard; Santos, Ilmar

    2013-01-01

    elastothermohydrodynamic lubrication regime), as well as using a test rig designed and built to this effect. The comparison between experimental and theoretical results provides solid ground to determine the accuracy of the available model for the the prediction of the steady-state behavior of the tilting-pad bearing...

  15. Analytical solution and simplified analysis of coupled parent-daughter steady-state transport with multirate mass transfer

    Science.gov (United States)

    R. Haggerty

    2013-01-01

    In this technical note, a steady-state analytical solution of concentrations of a parent solute reacting to a daughter solute, both of which are undergoing transport and multirate mass transfer, is presented. Although the governing equations are complicated, the resulting solution can be expressed in simple terms. A function of the ratio of concentrations, In (daughter...

  16. Steady-state pharmacokinetics of twice-daily dosing of saquinavir plus ritonavir in HIV-1-infected individuals

    NARCIS (Netherlands)

    Veldkamp, A. I.; van Heeswijk, R. P.; Mulder, J. W.; Meenhorst, P. L.; Schreij, G.; van der Geest, S.; Lange, J. M.; Beijnen, J. H.; Hoetelmans, R. M.

    2001-01-01

    To compare the steady state plasma pharmacokinetics of 1000 mg of saquinavir (SQV) in a soft-gel capsule (SGC) formulation in combination with 100 mg of ritonavir (RTV) (capsules) in a twice-daily dosing regimen in HIV-1-infected individuals with historical controls who used 400 mg of SQV in a

  17. Chromophore based analyses of steady-state diffuse reflectance spectroscopy: current status and perspectives for clinical adoption

    NARCIS (Netherlands)

    Bydlon, Torre M.; Nachabé, Rami; Ramanujam, Nimmi; Sterenborg, Henricus J. C. M.; Hendriks, Benno H. W.

    2015-01-01

    Diffuse reflectance spectroscopy is a rapidly growing technology in the biophotonics community where it has shown promise in its ability to classify different tissues. In the steady-state domain a wide spectrum of clinical applications is supported with this technology ranging from diagnostic to

  18. Heat transfer in a recirculatio zone at steady-state and oscillating conditions - the back facing step test case

    NARCIS (Netherlands)

    Pozarlik, Artur Krzysztof; Panara, D.; Kok, Jacobus B.W.; van der Meer, Theodorus H.; A.A. van Steenh G.G.M. Stoffels, T.H. van der Meer

    2008-01-01

    Steady state and transient heat transfer is a very important aspect of any combustion process. To properly simulate gas to wall heat transfer in a turbulent flow, an accurate prediction of the flow and the thermal boundary layer is required. A typical gas turbine combustion chamber flow presents

  19. High fidelity quasi steady-state aerodynamic model effects on race vehicle performance predictions using multi-body simulation

    Science.gov (United States)

    Mohrfeld-Halterman, J. A.; Uddin, M.

    2016-07-01

    We described in this paper the development of a high fidelity vehicle aerodynamic model to fit wind tunnel test data over a wide range of vehicle orientations. We also present a comparison between the effects of this proposed model and a conventional quasi steady-state aerodynamic model on race vehicle simulation results. This is done by implementing both of these models independently in multi-body quasi steady-state simulations to determine the effects of the high fidelity aerodynamic model on race vehicle performance metrics. The quasi steady state vehicle simulation is developed with a multi-body NASCAR Truck vehicle model, and simulations are conducted for three different types of NASCAR race tracks, a short track, a one and a half mile intermediate track, and a higher speed, two mile intermediate race track. For each track simulation, the effects of the aerodynamic model on handling, maximum corner speed, and drive force metrics are analysed. The accuracy of the high-fidelity model is shown to reduce the aerodynamic model error relative to the conventional aerodynamic model, and the increased accuracy of the high fidelity aerodynamic model is found to have realisable effects on the performance metric predictions on the intermediate tracks resulting from the quasi steady-state simulation.

  20. Absorption kinetics and steady-state plasma concentrations of theophylline following therapeutic doses of two sustained-release preparations

    DEFF Research Database (Denmark)

    Nielsen, M K; Eriksen, P B; Fenger, M

    1983-01-01

    Ten healthy volunteers received two sustained-release preparations as a single and multiple dose regimen in an open crossover study. Plasma theophylline concentrations were measured by an enzyme immunoassay. The limited fluctuation of the theophylline levels at steady state, with twice daily...... theophylline concentration....