WorldWideScience

Sample records for std test results

  1. Improving STD testing behavior among high-risk young adults by offering STD testing at a vocational school

    Directory of Open Access Journals (Sweden)

    Hoebe Christian JPA

    2011-09-01

    Full Text Available Abstract Background Chlamydia trachomatis infection (CT is the most prevalent bacterial STD. Sexually active adolescents and young adults are the main risk group for CT. However, STD testing rates in this group are low since exposed individuals may not feel at risk, owing-at least in part-to the infection's largely asymptomatic nature. Designing new testing environments that are more appealing to young people who are most at risk of acquiring chlamydia can be an important strategy to improve overall testing rates. Here we evaluate the effect of a school-based sexual health program conducted among vocational school students, aiming to obtain better access for counseling and enhance students' STD testing behavior. Methods Adolescents (median age 19 years attending a large vocational school were provided with sexual health education. Students filled in a questionnaire measuring CT risk and were offered STD testing. Using univariate and multivariate analysis, we assessed differences between men and women in STD-related risk behavior, sexual problems, CT testing behavior and determinants of CT testing behavior. Results Of 345 participants, 70% were female. Of the 287 sexually active students, 75% were at high risk for CT; one third of women reported sexual problems. Of sexually active participants, 61% provided a self-administered specimen for STD testing. Independent determinants for testing included STD related symptoms and no condom use. All CT diagnoses were in the high-CT-risk group. In the high-risk group, STD testing showed an increased uptake, from 27% (previous self-reported test to 65% (current test. CT prevalence was 5.7%. Conclusions Vocational school students are a target population for versatile sexual health prevention. When provided with CT testing facilities and education, self selection mechanisms seemed to increase CT testing rate dramatically in this high-CT-risk population expressing sexual problems. Considering the relative ease

  2. HIV and STD testing in prisons: perspectives of in-prison service providers.

    Science.gov (United States)

    Grinstead, Olga; Seal, David W; Wolitski, Richard; Flanigan, Timothy; Fitzgerald, Christine; Nealey-Moore, Jill; Askew, John

    2003-12-01

    Because individuals at risk for HIV and STDs are concentrated in prisons and jails, incarceration is an opportunity to provide HIV and STD testing. We interviewed 72 service providers working in U.S. prisons in four states about their experiences with and perceptions regarding HIV and STD testing in prison. Providers' job duties represented administration, education, security, counseling, and medical care. Providers' knowledge of prison procedures and programs related to HIV and STD testing was narrowly limited to their specific job duties, resulting in many missed opportunities for prevention counseling and referral. Suggestions include increasing health care and counseling staff so posttest counseling can be provided for those with negative as well as positive test results, providing additional prevention programs for incarcerated persons, improving staff training about HIV and STD testing, and improving communication among in-prison providers as well as between corrections and public health staff.

  3. SEDS MIL-STD-1773 fiber optic data bus: Proton irradiation test results and spaceflight SEU data

    Energy Technology Data Exchange (ETDEWEB)

    LaBel, K.A.; Stassinopoulos, E.G.; Miller, J.T. (NASA/GSFC, Greenbelt, MD (United States)); Marshall, P. (NRL/SFA, Washington, DC (United States)); Dale, C. (NRL, Washington, DC (United States)); Crabtree, C.M. (Hughes/ST Systems Corp., Seabrook, MD (United States)); Gates, M.M. (Jackson and Tull, Seabrook, MD (United States))

    1993-12-01

    The Small Explorer Data System (SEDS) was launched in July of 1992 as part of the Solar Anomalous Magnetospheric Particle Explorer (SAMPEX) mission. The SEDS utilizes NASA's first MIL-STD-1773 Fiber Optic Multiplexed Data Bus (or 1773 bus) to communicate with other spacecraft subsystems in the space environment. The 1773 bus is the fiber optic version of the MIL-STD-1553 Data Bus, a electronic wire bus used in many avionics applications. The authors present proton test and space flight single event effect data for NASA's first fiber optic data bus. Bit error rate predictions based on a new proton direct ionization model agree well with flight data for proton belt and solar flare effects.

  4. Qualification test of Class 1E equipment based on IEEE323 Std 2003

    International Nuclear Information System (INIS)

    Kim, J. S.; Jung, S. C.; Kim, T. R.

    2004-01-01

    IEEE Standard for Qualifying Class 1E Equipment has been updated to 2003 edition since the issue of IEEE Std 323-1971, 1974, 1983. NRC approved the IEEE Std 323-1974 as Qualification standard of Class 1E Equipment in domestic nuclear power plant. IEEE Std 323-2003 was issued in September of 2003 and utility is waiting the approval of NRC. IEEE Std 323-2003 suggest a new qualification technique which adopts the condition monitoring. Performance of two transient during DBA test is no longer recommended in IEEE Std 323-2003. IEEE323 Std 2003 included a chapter of ''extension of Qualified life'' to make available the life extension of components during plant life extension. For the efficient control of preserving EQ in domestic nuclear power plant, IEEE323 Std 2003 is strongly recommended

  5. National STD Awareness Month and GYT: Get Yourself Tested PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    2011-03-03

    April is National STD Awareness Month. In this PSA, native communities, especially adolescents and young adults, are encouraged to get educated, tested, and treated by visiting gytnow.org.  Created: 3/3/2011 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention.   Date Released: 3/3/2011.

  6. NATO Pallet with Javelin Missiles, MIL-STD-1660 Tests

    National Research Council Canada - National Science Library

    2004-01-01

    The U.S. Army Defense Ammunition Center (DAC), Validation Engineering Division (SJMAC-DEV) conducted tests in accordance with MIL-STD-1660, "Design Criteria for Ammunition Unit Loads" on the NATO pallet with Javelin missiles...

  7. STD Awareness Month PSA (:30)

    Centers for Disease Control (CDC) Podcasts

    2011-04-19

    April is National STD Awareness Month. STDs can affect anyone. Many STDs don't have symptoms so it's important to get tested.  Created: 4/19/2011 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention.   Date Released: 4/19/2011.

  8. Software Test Description (STD) for the Globally Relocatable Navy Tide/Atmospheric Modeling System (PCTides)

    National Research Council Canada - National Science Library

    Posey, Pamela

    2002-01-01

    The purpose of this Software Test Description (STD) is to establish formal test cases to be used by personnel tasked with the installation and verification of the Globally Relocatable Navy Tide/Atmospheric Modeling System (PCTides...

  9. Exploring Gender Differences in the Relationship between HIV/STD Testing and Condom Use among Undergraduate College Students

    Science.gov (United States)

    Bontempi, Jean Breny; Mugno, Raymond; Bulmer, Sandra M.; Danvers, Karina; Vancour, Michele L.

    2009-01-01

    Background: Rates of HIV/AIDS, and other sexually transmitted diseases (STDs), are increasing among university students. Purpose: The purpose of this study was to examine gender differences in the relationship between condom use and (1) HIV/STD testing behaviors, (2) STD treatment behaviors and, (3) alcohol use behaviors. Methods: A survey was…

  10. PA171 Containers on a Wood Pallet with Metal Top Adapter, Air Pressure Tests During MIL-STD-1660 Tests

    National Research Council Canada - National Science Library

    2004-01-01

    ... (PM-MAS) to conduct Air Pressure Tests during MIL-STD-1660, "Design Criteria for Ammunition Unit Loads" testing on the PA171 containers on a wood pallet with metal top adapter as manufactured by Alliant Tech...

  11. HIV/STD pattern and its associated risk factors among male STD clinic attendees in China: a foci for HIV intervention

    Directory of Open Access Journals (Sweden)

    Wang Qian-Qiu

    2011-12-01

    Full Text Available Abstract Background Previous studies suggested a high prevalence of STDs including HIV among female sex workers and men who have sex with men in China, but little was known about the prevalence in male patients attending public STD clinics. The aim of this study was to investigate STD patterns and HIV prevalence among male STD clinic attendees in different areas in China and the associated risk factors. The feasibility of Provider-initiated HIV testing and counseling (PITC was evaluated as well. Methods A cross-sectional study was conducted at 46 public STD clinics in 4 provinces in China. Between July 2009 and September 2009, a total of 3243 eligible subjects were invited to participate in an interview with a structured-questionnaire for collecting socio-demographic characteristics and sexual behavioral information. They also were asked to provide venous blood samples for serological determinations of HIV and syphilis infection, and first void urine specimens for detecting Chlamydia trachomatis and Neisseria gonorrhoeae infections, Results Out of the 3243 eligible patients, 2951(91% men agreed to take part in the HIV and syphilis testing. The overall prevalence rate of HIV infection was 0.7% while the rates of syphilis, N. gonorrhoeae, C. trachomatis infections were 10.7%, 4.3% and 6.9%, respectively, with the highest syphilis and N. gonorrhoeae rates in Jiangsu Province. Patients from Guangxi province, homosexual/bisexual practices and intravenous drug use were significantly associated with HIV infection in multivariate logistic regression analyses. Provider-initiated HIV testing and counseling (PITC was well accepted by attendees, with 91% of eligible attendees agreeing to undergo HIV testing and counseling. All HIV positive patients were properly managed accordingly. Conclusions A modest prevalence of HIV infection and substantial prevalence of other STD infections were found among male patients attending public STD clinics in China. The

  12. Intermodal Storage and Transport Frame (ISTF) MIL-STD-1660 Design Criteria for Ammunition Unit Loads Tests

    National Research Council Canada - National Science Library

    Barickman, Philip

    2004-01-01

    .... The ISTF was evaluated by the testing procedures set forth in MIL-STD-1660. Stacking, vibration, edgewise rotational drop, incline impact, sling compatibility, forklifting, and disassembly testing were conducted on the ISTF units...

  13. Development and results of a test program to demonstrate compliance with IEEE STD 384 and R.G. 1.75 electrical separation requirements

    International Nuclear Information System (INIS)

    Eckert, G.P.; Heneberry, E.F.; Walker, F.P.; Konkus, J.F.

    1987-01-01

    The IEEE Std 384-1974, entitled ''Criteria for Separation of Class 1E Equipment and Circuits,'' contains criteria to ensure the independence of redundant Class 1E equipment when designing electrical systems in nuclear plants. The NRC, in R.G. 1.75 Rev. 2, 1978, endorses, with comments, IEEE-384, as the means of achieving independence. One method given in IEEE-384, is that of maintaining a specified separation between components; another method utilizes a combination of separation and barriers. The standard also allows alternative methods to be used when justified by test-based analyses. This paper is a report of a test program undertaken to provide a basis for analysis in the development of alternative methods of achieving separation. The test parameters developed and used, and the results obtained, should prove useful in determining alternative methods of complying with R.G. 1.75 requirements

  14. HIV and STD status among MSM and attitudes about Internet partner notification for STD exposure.

    Science.gov (United States)

    Mimiaga, Matthew J; Tetu, Ashley M; Gortmaker, Steven; Koenen, Karestan C; Fair, Andrew D; Novak, David S; Vanderwarker, Rodney; Bertrand, Thomas; Adelson, Stephan; Mayer, Kenneth H

    2008-02-01

    This study assessed the acceptability and perceived utility of Internet-based partner notification (PN) of sexually transmitted disease (STD) exposure for men who have sex with men (MSM) by human immunodeficiency virus (HIV) serostatus. We recruited 1848 US MSM via a banner advertisement posted on an MSM website for meeting sexual partners between October and November 2005. Even though there was broad acceptance of a PN e-mail across HIV serostatus groups, HIV-infected men rated the importance of each component (e.g., information about where to get tested/treated, additional education regarding the STD exposed to, a mechanism for verifying the authenticity of the PN e-mail) lower than HIV-uninfected or status-unknown participants (all P's e-mail (if they were to receive an e-mail notifying them of possible STD exposure in the future), and were less likely to inform their partners of possible STD exposure via an Internet notification system in the future (all P's e-mail. If public health officials consider using Internet notification services, they may need to anticipate and address concerns of HIV-infected MSM, and will need to use a culturally-sensitive, social marketing campaign to ensure that those who may benefit from these services are willing to use this modality for PN. Internet PN should be considered as a tool to decrease rising STD and HIV rates among MSM who use the Internet to meet sexual partners.

  15. STD screening, testing, case reporting, and clinical and partner notification practices: a national survey of US physicians.

    Science.gov (United States)

    St Lawrence, Janet S; Montaño, Daniel E; Kasprzyk, Danuta; Phillips, William R; Armstrong, Keira; Leichliter, Jami S

    2002-11-01

    This study presents results from a national survey of US physicians that assessed screening, case reporting, partner management, and clinical practices for syphilis, gonorrhea, chlamydia, and HIV infection. Surveys were mailed to a random sample of 7300 physicians to assess screening, testing, reporting, and partner notification for syphilis, gonorrhea, chlamydia, and HIV. Fewer than one third of physicians routinely screened men or women (pregnant or nonpregnant) for STDs. Case reporting was lowest for chlamydia (37 percent), intermediate for gonorrhea (44 percent), and higher for syphilis, HIV, and AIDS (53 percent-57 percent). Physicians instructed patients to notify their partners (82 percent-89 percent) or the health department (25 percent-34 percent) rather than doing so themselves. STD screening levels are well below practice guidelines for women and virtually nonexistent for men. Case reporting levels are below those legally mandated; physicians rely instead on patients for partner notification. Health departments must increase collaboration with private physicians to improve the quality of STD care.

  16. Grate Pallet 8232 (GP-8232) Vehicle Pallet, Evaluation Tests MIL-STD-1660, "Design Criteria for Ammunition Unit Loads" and TP-94-01 (REV 1), "Transportability Testing Procedures"

    National Research Council Canada - National Science Library

    Barickman, Philip

    2003-01-01

    .... The testing was conducted for informational purposes only. The GP-8232 Vehicle Pallet was evaluated by the testing procedures set forth in MIL-STD-1660 and TP-94-01 (Rev. 1) testing procedures...

  17. Small Explorer Data System MIL-STD-1773 fiber optic bus

    Science.gov (United States)

    Flanegan, Mark; Label, Ken

    1992-01-01

    The MIL-STD-1773 Fiber Optic Data Bus as implemented in the GSFC Small Explorer Data System (SEDS) for the Small Explorer Program is described. It provides an overview of the SEDS MIL-STD-1773 bus components system design considerations, reliability figures, acceptance and qualification testing requirements, radiation requirements and tests, error handling considerations, and component heritage. The first mission using the bus will be launched in June of 1992.

  18. STD Training in Canadian Medical Schools

    Directory of Open Access Journals (Sweden)

    Jo-Anne A Doherty

    1992-01-01

    Full Text Available OBJECTIVE: The emergence of the acquired immune deficiency syndrome in 1981 and the consequent publicity surrounding sexual behaviour has increased the likelihood that patients will seek medical advice. Sexually transmitted disease (STD teaching and postgraduate medical programs in Canadian schools of medicine have not been adequately documented. Accordingly, the Laboratory Centre for Disease Control. Department of National Health and Welfare, sought to determine the magnitude and scope of STD training in these schools. DESIGN: A four page questionnaire sought information on preclinical, clinical and residency training in terms of the number of classroom and laboratory hours of instruction, the subspecialty responsible for providing the training, and the clinical ‘hands on’ experience of the teachers: each respondent was also asked to assess the quality and scope of instruction provided at his/her medical school. SETTING/PARTICIPANTS: The questionnaire was mailed to the Dean of each of the 16 schools of medicine in Canada: it was requested that the questionnaire be forwarded to and completed by the person responsible for STD training at the university. RESULTS: Thirteen schools (81% completed the questionnaire. Each school indicated that some STD instruction was provided at the undergraduate level: the mean number of hours of classroom instruction was 6.1. Physicians with STD clinical ‘hands on’ experience were responsible for teaching in 12 schools. Infectious disease residents spent 4 to 80 h on STDs, while those from other residency programs where STD was not an elective spent 2 to 8 h. Each medical school was asked to provide an evaluation of its program. Only three respondents considered their STD training program adequate. The majority of schools responded that infectious disease residents received sufficient training but the training offered medical students and residents in other programs was less than adequate. The quality

  19. Another Look at the Draft Mil-Std-1540E Unit Random Vibration Test Requirements

    Science.gov (United States)

    Perl, E.; Peterson, A. J..; Davis, D.

    2012-07-01

    The draft Mil-Std-1540E has been updated to reflect lessons learned since its publication as an SMC Standard in 2008, [1], and an earlier Aerospace Corporation Technical Report released in 2006, [2]. This paper discusses the technical rationale supporting some of the unit random vibration test requirements to provide better insight into their derivation and application to programs. It is intended that these requirements be tailored for each program to reflect the customer risk profile. Several tailoring options are provided and a two phase test strategy is discussed to highlight its applicability to utilizing heritage hardware in new applications.

  20. Composite Monopack for 120mm Mortar, With Plastic Pallet Adapters on a 42" x 53" Wooden Pallet, MIL-STD-1660 Tests, "Design Criteria for Ammunition Unit Loads", and Extreme Temperature Tests

    National Research Council Canada - National Science Library

    Dugan, Jeffery L

    2005-01-01

    .... The test units were tested in accordance with the procedures set forth in MIL-STD-1660. Stacking, repetitive shock, edgewise-rotational drop, incline-impact, forklifting, and disassembly testing were conducted on the test units...

  1. Developing a Motion Comic for HIV/STD Prevention for Young People Ages 15-24, Part 2: Evaluation of a Pilot Intervention.

    Science.gov (United States)

    Willis, Leigh A; Kachur, Rachel; Castellanos, Ted J; Nichols, Kristen; Mendoza, Maria C B; Gaul, Zaneta J; Spikes, Pilgrim; Gamayo, Ashley C; Durham, Marcus D; LaPlace, Lisa; Straw, Julie; Staatz, Colleen; Buge, Hadiza; Hogben, Matthew; Robinson, Susan; Brooks, John; Sutton, Madeline Y

    2018-03-01

    In the United States, young people (ages 15-24 years) are disproportionately affected by human immunodeficiency virus (HIV) and other sexually transmitted diseases (STDs), due at least in part to inadequate or incorrect HIV/STD-related knowledge, attitudes, beliefs, and behavioral intentions (KABI). Comic book narratives are a proven method of HIV/STD prevention communication to strengthen KABI for HIV/STD prevention. Motion comics, a new type of comic media, are an engaging and low-cost means of narrative storytelling. The objective of this study was to quantitatively evaluate the effectiveness of a pilot six-episode HIV/STD-focused motion comic series to improve HIV/STD-related KABI among young people. We assessed change in HIV/STD knowledge, HIV stigma, condom attitudes, HIV/STD testing attitudes, and behavioral intentions among 138 participants in 15 focus groups immediately before and after viewing the motion comic series. We used paired t-tests and indicators of overall improvement to assess differences between surveys. We found a significant decrease in HIV stigma (p comic intervention improved HIV/STD-related KABI of young adult viewers by reducing HIV stigma and increasing behavioral intentions to engage in safer sex. Our results demonstrate the promise of this novel intervention and support its use to deliver health messages to young people.

  2. A versatile electrical penetration design qualified to IEEE Std. 317-1983

    International Nuclear Information System (INIS)

    Lankenau, W.; Wetherill, T.M.

    1994-01-01

    Although worldwide demand for new construction of nuclear power stations has been on a decline, the available opportunities for the design and construction of qualified electrical penetrations continues to offer challenges, requiring a highly versatile design. Versatility is necessary in order to meet unique customer requirements within the constraints of a design basis qualified to IEEE Std. 317-1983. This paper summarizes such a versatile electrical penetration designed, built and tested to IEEE Std. 317-1983. The principal features are described including major materials of construction. Some of the design constraints such as sealing requirements, and conductor density (including numerical example) are discussed. The requirements for qualification testing of the penetration assembly to IEEE Std. 317-1983 are delineated in a general sense, and some typical test ranges for preconditioning, radiation exposure, and LOCA are provided. The paper concludes by describing ways in which this versatile design has been adapted to meet unique customer requirements in a variety of nuclear power plants

  3. HIV Services Provided by STD Programs in State and Local Health Departments - United States, 2013-2014.

    Science.gov (United States)

    Cuffe, Kendra M; Esie, Precious; Leichliter, Jami S; Gift, Thomas L

    2017-04-07

    The incidence of human immunodeficiency virus (HIV) infection in the United States is higher among persons with other sexually transmitted diseases (STDs), and the incidence of other STDs is increased among persons with HIV infection (1). Because infection with an STD increases the risk for HIV acquisition and transmission (1-4), successfully treating STDs might help reduce the spread of HIV among persons at high risk (1-4). Because health department STD programs provide services to populations who are at risk for HIV, ensuring service integration and coordination could potentially reduce the incidence of STDs and HIV. Program integration refers to the combining of STD and HIV prevention programs through structural, service, or policy-related changes such as combining funding streams, performing STD and HIV case matching, or integrating staff members (5). Some STD programs in U.S. health departments are partially or fully integrated with an HIV program (STD/HIV program), whereas other STD programs are completely separate. To assess the extent of provision of HIV services by state and local health department STD programs, CDC analyzed data from a sample of 311 local health departments and 56 state and directly funded city health departments derived from a national survey of STD programs. CDC found variation in the provision of HIV services by STD programs at the state and local levels. Overall, 73.1% of state health departments and 16.1% of local health departments matched STD case report data with HIV data to analyze possible syndemics (co-occurring epidemics that exacerbate the negative health effects of any of the diseases) and overlaps. Similarly, 94.1% of state health departments and 46.7% of local health departments performed site visits to HIV care providers to provide STD information or public health updates. One fourth of state health departments and 39.4% of local health departments provided HIV testing in nonclinical settings (field testing) for STD

  4. A ten year study of STD Cases in an urban clinic in Calcutta

    Directory of Open Access Journals (Sweden)

    Ghosh Sadhana

    1994-01-01

    Full Text Available Total 16440 patients attended the STD clinic during the 10 years period of study from 1984 to 1993. From 1988 number of STD caes were gradually decreasing probably due to less promiscuity in fear of AIDS and different measures taken to prevent transmission of HIV infection. But it does not lessen the importance of STD control, because syphilis is still prevalent (8% with congenital syphilis. Peak in the incidence of chancroid (15% is alarming as this may lead to increased transmission of HIV infection in near future. Male unmarried constituted the bulk of STD sufferers (44% and married males (34%, while female unmarried and married patients were 1% and 20% respectively, 5.7% of antenatal mothers were strongly seroreactive for syphilis. Therefore all antenatal mothers should be screened for STD and routine serological test for syphilis should be done.

  5. IEEE Std 101-1987: IEEE guide for the statistical analysis of thermal life test data

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This revision of IEEE Std 101-1972 describes statistical analyses for data from thermally accelerated aging tests. It explains the basis and use of statistical calculations for an engineer or scientist. Accelerated test procedures usually call for a number of specimens to be aged at each of several temperatures appreciably above normal operating temperatures. High temperatures are chosen to produce specimen failures (according to specified failure criteria) in typically one week to one year. The test objective is to determine the dependence of median life on temperature from the data, and to estimate, by extrapolation, the median life to be expected at service temperature. This guide presents methods for analyzing such data and for comparing test data on different materials

  6. A study on the present scenario of STD management in an urban clinic in Kolkata

    Directory of Open Access Journals (Sweden)

    Ghosh Sadhan Kumar

    2002-01-01

    Full Text Available A total of 4129 patients attended the STD clinic from 1996 to 1999. Of those 25.75% were STD cases. Male and female cases comprised 86% and 14% respectively. Majority were in the age group between 18 to 38 years. Choncroid was the commonest STD (37. 7%. Other STDs in order were syphilis (30. 66%, NGU (15.71%, gonorrhoea (7%, venereal wart (3.57%, candidiasis (2.53%, trichomonal vaginitis (1.6%, herpes genitalis (0.65% and LGV (0.47%. No case of Donovanosis or HIV was detected. 13.7% of STD cases were reactive for VDRL test and 8% of the antenatal attendents were strongly VDRL test reactive. The urethral discharge on gram staining was positive for gonococcus, in 29%. 68% of the clinic attendents were given safer sex education and served condom.

  7. Internet and Email Use Among STD Clinic Patients

    Science.gov (United States)

    Mark, Karen E.; Wald, Anna; Drolette, Linda; Golden, Matthew R.

    2009-01-01

    Background Little data exist on Internet and email use among STD clinic patients for research and clinical care communication. Methods An anonymous cross-sectional survey of STD clinic patients aged ≥ 18 years in Seattle, Washington, March 13–22, 2006. Results Of 489 study period patients, 251 (51%) completed the questionnaire. Participants had a median age of 30 (range 18–66) years and were 69% male, 56% White, 19% African-American, 9% Hispanic, and 7% Asian/Pacific Islander. 75% had some post-secondary education but half reported an annual income of email that they check at least 3 times a week, and 144 (57%) were willing to receive an email reminding them to come back for a follow-up appointment if diagnosed with an STD. MSM were more likely than women and heterosexual men to be regular Internet and email users (92% versus 70%, p = 0.001) and to have met a sex partner over the Internet during the past year (69% versus 11%, p email use, as was racial/ethnic background (86% of Whites, 48% of African-Americans, 73% of Hispanics, 100% of Asians/Pacific Islanders, and 57% of others, p email use are common and acceptable to many STD clinic patients for research and clinical purposes. PMID:18685548

  8. Ammunition Peculiar Equipment (APE) 1995, NIR Propellant Analyzer, to MIL-STD-398, Military Standard Shields, Operational for Ammunition Operations, Criteria for Design of and Tests for Acceptance

    National Research Council Canada - National Science Library

    2003-01-01

    ... (SJMAC-DEM) to test the Ammunition Peculiar Equipment (APE) 1995 NIR Propellant Analyzer, to MIL-STD-398, "Military Standard Shields, Operational for Ammunition Operations, Criteria for Design of and Tests for Acceptance...

  9. The effect of HIV, behavioural change, and STD syndromic management on STD epidemiology in sub-Saharan Africa: simulations of Uganda

    NARCIS (Netherlands)

    E.L. Korenromp (Eline); R. Bakker (Roel); R. Gray; M.J. Wawer; D. Serwadda; J.D.F. Habbema (Dik)

    2002-01-01

    textabstractAn assessment was made of how the HIV epidemic may have influenced sexually transmitted disease (STD) epidemiology in Uganda, and how HIV would affect the effectiveness of syndromic STD treatment programmes during different stages of the epidemic. The dynamic

  10. Composite Monopack for 120mm Mortar, With Plastic Pallet Adapters on a 42" x 53" Wooden Pallet, MIL-STD-1660 Tests, "Design Criteria for Ammunition Unit Loads", and Extreme Temperature Tests

    National Research Council Canada - National Science Library

    Dugan, Jeffery L

    2005-01-01

    ... (AMSRD-AAR-AIL-P) to conduct MIL-STD-1660 Tests to determine if the composite monopack for the 120MM mortar, with plastic pallet adapters on a 42" x 53" wooden pallet, designed by US Army ARDEC and manufactured...

  11. STD Awareness – Reaching Youth

    Centers for Disease Control (CDC) Podcasts

    2012-04-16

    In this podcast, Dr. Gail Bolan, Director of CDC's Division of STD Prevention, discusses the problem of STDs in young people, 15-24, and what providers can do.  Created: 4/16/2012 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 4/16/2012.

  12. Sexual Risk Behavior: HIV, STD, & Teen Pregnancy Prevention

    Science.gov (United States)

    ... A-Glance Project Connect Sexual Health STD Teen Pregnancy Sexual Risk Behaviors: HIV, STD, & Teen Pregnancy Prevention Recommend on Facebook Tweet ... their risk for HIV , other STDs , and unintended pregnancy . The National HIV/AIDS Strategy calls for all Americans to be ...

  13. Std trends in chengalpattu hospital

    Directory of Open Access Journals (Sweden)

    Krishnamurthy V

    1996-01-01

    Full Text Available A retrospective data analysis was carried out to find the trends in frequency and distribution of different STDs at Chengalpattu during 1988-1994. Of the 4549 patients who attended the clinic 3621 (79.6% were males and 928 (20.4% were females. The commonest STD was Chancroid (24.4% in men and Syphillis (29% in women. Balanoposthitis (11.4% ranked third among STDs in males. Though the STD attendance showed a declining trend, most diseases showed a constant distribution. The percentage composition of secondary and latent syphillis, Genital Warts, Genital Herpes and the Non-Venereal group showed an increased composition in recent years. Primary syphillis in females showed a definite declining trend. The HIV sero-positive detection rate was 2.06%. Of the 1116 patients screened for HIV antibody, 23 patients were detected sero-positive. Time Series Regression Analysis was used to predict the number of patients who would attend the STD clinic with various STDs in 1995 and 1996 to help in the understanding of the disease load and pattern in future, in resources management and in developing and evaluating preventive measures.

  14. Compact, Low-Overhead, MIL-STD-1553B Controller

    Science.gov (United States)

    Katz, Richard; Barto, Rod

    2009-01-01

    A compact and flexible controller has been developed to provide MIL-STD- 1553B Remote Terminal (RT) communications and supporting and related functions with minimal demand on the resources of the system in which the controller is to be installed. (MIL-STD-1553B is a military standard that encompasses a method of communication and electrical-interface requirements for digital electronic subsystems connected to a data bus. MIL-STD-1553B is commonly used in defense and space applications.) Many other MIL-STD-1553B RT controllers are complicated, and to enable them to function, it is necessary to provide software and to use such ancillary separate hardware devices as microprocessors and dual-port memories. The present controller functions without need for software and any ancillary hardware. In addition, it contains a flexible system interface and extensive support hardware while including on-chip error-checking and diagnostic support circuitry. This controller is implemented within part of a modern field-programmable gate array.

  15. IEEE Std 535-1979: IEEE standard for qualification of Class 1E lead storage batteries for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This document describes qualification methods for Class 1E lead storage batteries and racks to be used in nuclear power generating stations outside of primary containment. Qualification required in ANSI/IEEE Std 279-1971 and IEE Std 308-1978, can be demonstrated by using the procedures provided in this standard in accordance with IEEE Std 323-1974. Battery sizing, maintenance, capacity testing, installation, charging equipment and consideration of other type batteries are beyond the scope of this standard

  16. Knowledge, Beliefs and Behaviours Related to STD Risk, Prevention, and Screening among a Sample of African American Men and Women

    Science.gov (United States)

    Uhrig, Jennifer D.; Friedman, Allison; Poehlman, Jon; Scales, Monica; Forsythe, Ann

    2014-01-01

    Objective: Current data on sexually transmitted disease (STD) among African Americans show significant racial/ethnic disparities. The purpose of this study was to explore knowledge, attitudes, beliefs, and behaviours related to STD risk, prevention, and testing among African American adults to help inform the development of a health communication…

  17. Return of IEEE Std 627 and its Value to Equipment Qualification Programs

    International Nuclear Information System (INIS)

    Horvath, D.A.

    2012-01-01

    IEEE Std 627 ''Design Qualification of Safety Systems Equipment Used in Nuclear Power Generating Stations'' was issued to more generically establish qualification requirements in the form of a high level umbrella document. Efforts on this standard began in late 1975 at the request of the IEEE Nuclear Standards Management Board. In 1977 a joint ASME/IEEE agreement established responsibility for qualification and quality assurance standards preparation. ASME accepted responsibility for Quality Assurance and IEEE for qualification. In accordance with that agreement, IEEE completed the generic qualification standard in 1980. This document provided high level approaches, criteria, guidance, and principles for qualification of both electrical and mechanical equipment that at that time appeared in no other industry standard. IEEE Std 627-1980 was later reaffirmed in 1996. In 1986, ASME's Board on Nuclear Codes and Standards directed its Committee on Qualification of Mechanical Equipment (QME) to develop a standard for qualifying mechanical equipment. This task was completed in several parts during the time frame from 1992 to 1994. Partly in response to this activity, IEEE Std 627 was withdrawn in 2002. Later although withdrawn, it was found that IEEE Std 627 was continuing to be used and referenced by many entities both in the US and other countries including in ASME's QME-1-2002 ''Qualification of Active Mechanical Equipment Used in Nuclear Power Plants'', US NRC's NUREG-0800 Standard Review Plan Section 3.11, at least one reactor vendor's Design Certification Document (DCD), several international licensing documents, and elsewhere. As a result, in 2007, the IEEE Standards Board authorized Working Group 2.10 of Subcommittee 2 (Qualification) of the Power and Energy Society's Nuclear Power Engineering Committee to resurrect and update IEEE Std 627-1980 (Reaff 1996). The result was the culmination IEEE Std 627 in 2010. This paper will report on the eight improvements made

  18. Estimating the Size and Cost of the STD Prevention Services Safety Net.

    Science.gov (United States)

    Gift, Thomas L; Haderxhanaj, Laura T; Torrone, Elizabeth A; Behl, Ajay S; Romaguera, Raul A; Leichliter, Jami S

    2015-01-01

    The Patient Protection and Affordable Care Act is expected to reduce the number of uninsured people in the United States during the next eight years, but more than 10% are expected to remain uninsured. Uninsured people are one of the main populations using publicly funded safety net sexually transmitted disease (STD) prevention services. Estimating the proportion of the uninsured population expected to need STD services could help identify the potential demand for safety net STD services and improve program planning. In 2013, an estimated 8.27 million people met the criteria for being in need of STD services. In 2023, 4.70 million uninsured people are expected to meet the criteria for being in need of STD services. As an example, the cost in 2014 U.S. dollars of providing chlamydia screening to these people was an estimated $271.1 million in 2013 and is estimated to be $153.8 million in 2023. A substantial need will continue to exist for safety net STD prevention services in coming years.

  19. Assessing STD Partner Services in State and Local Health Departments.

    Science.gov (United States)

    Cuffe, Kendra M; Leichliter, Jami S; Gift, Thomas L

    2018-02-07

    State and local health department STD programs provide several partner services to reduce disease transmission. Budget cuts and temporary staff reassignments for public health emergencies may affect the provision of partner services. Determining the impact of staffing reductions on STD rates and public health response should be further assessed.

  20. Projectile, 155MM, XM982, Excalibur, Packed One (1) per PA179 Container, Unitized Up to Three (3) per 40 in. x 48 in. Wooden Pallet, MIL-STD-1660 Tests

    National Research Council Canada - National Science Library

    Dugan, Jeffery L

    2007-01-01

    The U.S. Army Defense Ammunition Center (DAC), Validation Engineering Division (SJMAC-DEV), conducted tests in accordance with MIL-STD-1660, "Design Criteria for Ammunition Unit Loads" on the XM982 155MM Excalibur Projectile packed one...

  1. Sexual Lifestyle, Risk Factors and Socioeconomic Status of the STD Patients in Bangladesh.

    Science.gov (United States)

    Nandi, A K; Hossain, K J; Islam, A S

    2017-01-01

    Sexually transmitted diseases (STDs) are increasing alarmingly with time among the young-adults in Bangladesh. The objective of the study was to investigate Sexual lifestyle, Risk Factors and Socioeconomic Status of the STD Patients. A total of 205 STD patients were selected following convenient method of sampling consistent with defined selection criteria from outpatient department of Skin and Venereal Disease of Mymensingh Medical College Hospital, Mymensingh. Period of data collection was from July 2014 to June 2015. The research instrument was an interviewer questionnaire and laboratory investigation reports. Results showed that the mean age of the respondents was 27±5.9 years of which 104(50.7%) unmarried and 95(46.3%) married. Level of education, 168(82.0%) of the STD patients were literate. Occupation of the STD patients, 201(98.0%) had specific occupation of which 74(36.1%) were businessmen, 48(23.4%) student, 24(11.7%) technical jobs, 20(9.8%) day labourer, 15(7.3%) household workers, 14(6.8%) service holders and 6(2.9%) were transport workers. Their average monthly income was Tk. 7892±6763. Majority of the STD patients 115((56.1%) expressed that they enjoyed extra-marital sex or illegal sex out of curiosity, 32(15.6%) habitual, 24(11.7%) to test sexual performance, 18(8.8%) inadequate response of the legal sex partners, 8(3.9%) hyper-sexuality and 8(3.9%) family disharmony. Most of the patients 200(97.6%) were heterosexual of which 165(80.5%) visited 1-10 sex partners, 18(8.8%) 11-20 sex partners and 22(10.7%) visited 21-100 sex partners in lifetime. In category of sex partners, 60(29.3%) were hotel-based sex partners, 111(54.1%) brothel-based, 20(9.8%) friends sex partners, 10(4.9%) street sex sellers and 4(2.0%) were residential sex partners respectively. Of them, 132(64.4%) did not use condom during sex, 65(31.7%) use it occasionally and only 8(3.9%) use condom regularly. Most of them 170((82.8%) had been suffering from gonococcal urethritis, 19

  2. IEEE Std 535-1986: IEEE standard for qualification of Class 1E lead storage batteries for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This document describes qualification methods for Class 1E lead storage batteries and racks to be used in nuclear power generating stations outside of primary containment. Qualification required in ANSI/IEEE Std 308-1980 can be demonstrated by using the procedures provided in this standard in accordance with ANSI/IEEE Std 323-1983. Battery sizing, maintenance, capacity testing, installation, charging equipment, and consideration of other type batteries are beyond the scope of this standard

  3. Net Weight Issue LLNL DOE-STD-3013 Containers

    International Nuclear Information System (INIS)

    Wilk, P

    2008-01-01

    The following position paper will describe DOE-STD-3013 container sets No.L000072 and No.L000076, and how they are compliant with DOE-STD-3013-2004. All masses of accountable nuclear materials are measured on LLNL certified balances maintained under an MC and A Program approved by DOE/NNSA LSO. All accountability balances are recalibrated annually and checked to be within calibration on each day that the balance is used for accountability purposes. A statistical analysis of the historical calibration checks from the last seven years indicates that the full-range Limit of Error (LoE, 95% confidence level) for the balance used to measure the mass of the contents of the above indicated 3013 containers is 0.185 g. If this error envelope, at the 95% confidence level, were to be used to generate an upper-limit to the measured weight of the containers No.L000072 and No.L000076, the error-envelope would extend beyond the 5.0 kg 3013-standard limit on the package contents by less than 0.3 g. However, this is still well within the intended safety bounds of DOE-STD-3013-2004

  4. The Use of Technology for STD Partner Services in the United States: A Structured Review.

    Science.gov (United States)

    Kachur, Rachel; Hall, Wendasha; Coor, Alexandra; Kinsey, Jennine; Collins, Dayne; Strona, F V

    2018-05-01

    Since the late 1990s, health departments and STD programs throughout the U.S. have used technologies, such as the internet and mobile phones, to provide services to persons with a sexually transmitted infection, including HIV, and their sex partners, also known as partner services. This study reviewed the published literature to assess and compare partner services outcomes as a result of using technology and to calculate cost savings through cases averted. We conducted a structured literature review of all U.S. studies that examined the use of technology to notify persons exposed to an STD (syphilis, chlamydia, gonorrhea), including HIV, by health care professionals in the U.S. from 2000 to 2017. Outcome measures, including the number of the number of partners notified, screened or tested; and new positives identified, were captured and cost savings were calculated, when data were available. Seven studies were identified. Methods used for partner services differed across studies, although email was the primary mode in 6 (83%) of the 7 studies. Only 2 of the 7 studies compared use of technology for partner services to traditional partner services. Between 10% and 97% of partners were successfully notified of their exposure through the use of technology and between 34% and 81% were screened or tested. Five studies reported on new infections identified, which ranged from 3-19. Use of technology for partner serves saved programs between $22,795 and $45,362 in direct and indirect medical costs. Use of technology for partner services increased the number of partners notified, screened or tested, and new infections found. Importantly, the use of technology allowed programs to reach partners who otherwise would not have been notified of their exposure to an STD or HIV. Improved response times and time to treatment were also seen as was re-engagement into care for previous HIV positive patients. Data and outcome measures across the studies were not standardized, making it

  5. An audit of Colposcopy referrals from a GU/STD clinic.

    LENUS (Irish Health Repository)

    O'Connor, Catherine

    2008-01-01

    BACKGROUND: Cervical cancer is increasing at 1.5% per year in Ireland with 50% mortality giving 2.2% of all cancer deaths. In the Mid-West region a pilot screening programme has begun to screen all women 25-60 years. 66% of Genitourinary\\/Sexually transmitted disease (GU\\/STD) clinics\\' abnormal smears are <25 years. Requests to abandon "opportunistic" screening prompted this GU\\/STD clinic audit. METHODS: 221(8.4%) patients referred to colposcopy over 4 years were audited. Retrospective analysis was carried out on GU\\/STD clinic files, hospital files and computer records for biopsy reports. Ethical approval was prospectively granted. RESULTS: 2637 smears were carried out from November 1999 - September 2003.221 patients referred to colposcopy were audited.1%, 3%, 5% had severe, moderate and, mild dyskaryosis, respectively, on cervical screening while 0.8%, 1.2%, 1.5% had CIN3, CIN2, CIN1 abnormalities, respectively, on biopsy with 3.5% having no abnormality (Cervical Intraepithelial Neoplasia = CIN).53% referred to colposcopy were <25 years. CONCLUSION: 2% had high grade lesions. 37% of high grade lesions are <25 years.Of the high grade lesions 13% had Chlamydia trachomatis (27% of CIN3) and 44% had HPV despite Relative Risks (RR) being 0.75 and 1.09 respectively. Older women had higher grade changes. No statistical difference was found for progression, regression and persistence in those over and under 25.

  6. Telling Your Partner You Have an STD

    Science.gov (United States)

    ... STD after a confirmed diagnosis may be a criminal offense in some states. Some STDs can affect ... to make decisions about sex or your relationship right away. It's normal to want acceptance and reassurance ...

  7. CDC WONDER: Sexually Transmitted Disease (STD) morbidity

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Sexually Transmitted Disease (STD) Morbidity online databases on CDC WONDER contain case reports reported from the 50 United States and D.C., Puerto Rico, Virgin...

  8. CDC WONDER: Sexually Transmitted Disease (STD) Morbidity

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Sexually Transmitted Disease (STD) Morbidity online databases on CDC WONDER contain case reports reported from the 50 United States and D.C., Puerto Rico, Virgin...

  9. STD Prevention Policies in the United States: Evidence and Opportunities

    OpenAIRE

    Leichliter, Jami S.; Seiler, Naomi; Wohlfeiler, Dan

    2016-01-01

    Policies are an important part of public health interventions, including in the area of STD prevention. Similar to other tools used in public health, policies are often evaluated to determine their usefulness. Therefore, we conducted a non-systematic review of policy evidence for sexually transmitted disease prevention. Our review considers assessments or evaluations of STD prevention-specific policies, health care system policies, and other, broader policies that have the potential to impact...

  10. IEEE Std 381-1977: IEEE standard criteria for type tests of Class 1E modules used in nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This document describes the basic requirements of a type test program with the objective of verifying that a module used as Class 1E equipment in a nuclear power generating station meets or exceeds its design specifications. This document is limited to class 1E modules from and including the sensor through the logic circuitry of the final actuation devices. Except for those that are part of a module, switchgear, cables, connections, motors, valve actuators, station batteries, and penetrations are not included and are covered by other IEEE documents. The purpose of this document is to supplement the procedures and requirements given in IEEE Std 323-1974 [24] for type testing Class 1E modules, thereby providing directions for establishment of a type test program which will obtain the required test data and yield the required documentation of test methods and results. This standard is structured to present to the user the principal performance characteristics and environmental parameters which must be considered in designing a type test program for any give Class 1E module. These modules range from tiny sensors to complete racks or cabinets full of equipment that may be located inside or outside containment. The Class 1E modules are required to perform their function before, during, or after, or all, any design basis event specified for the module. The vast variety of modules covered by this document precludes the listing here of specific requirements for each type test

  11. [Factors associated with condom use and knowledge about STD/AIDS among teenagers in public and private schools in São Paulo, Brazil].

    Science.gov (United States)

    Martins, Laura B Motta; da Costa-Paiva, Lúcia Helena S; Osis, Maria José D; de Sousa, Maria Helena; Pinto-Neto, Aarão M; Tadini, Valdir

    2006-02-01

    This study aimed to compare knowledge about STD/AIDS and identify the factors associated with adequate knowledge and consistent use of male condoms in teenagers from public and private schools in the city of São Paulo, Brazil. We selected 1,594 adolescents ranging 12 to 19 years of age in 13 public schools and 5 private schools to complete a questionnaire on knowledge of STD/AIDS and use of male condoms. Prevalence ratios were computed with a 95% confidence interval. The score on STD knowledge used a cutoff point corresponding to 50% of correct answers. Statistical tests were chi-square and Poisson multiple regression. Consistent use of male condoms was 60% in private and 57.1% in public schools (p > 0.05) and was associated with male gender and lower socioeconomic status. Female gender, higher schooling, enrollment in private school, Caucasian race, and being single were associated with higher knowledge of STDs. Teenagers from public and private schools have adequate knowledge of STD prevention, however this does not include the adoption of effective prevention. Educational programs and STD/AIDS awareness-raising should be expanded in order to minimize vulnerability.

  12. Intimate Partner Violence, Sexual Autonomy and Postpartum STD Prevention Among Young Couples: A Mediation Analysis.

    Science.gov (United States)

    Willie, Tiara C; Callands, Tamora A; Kershaw, Trace S

    2018-03-01

    The transition to parenthood is a stressful time for young couples and can put them at risk for acquiring STDs. Mechanisms underlying this risk-particularly, intimate partner violence (IPV) and sexual autonomy-have not been well studied. Between 2007 and 2011, a prospective cohort study of the relationships and health of pregnant adolescents and their male partners recruited 296 couples at four hospital-based obstetrics and gynecology clinics in the U.S. Northeast; participants were followed up six and 12 months after the birth. Structural equation modeling identified associations among IPV at baseline and six months, sexual autonomy at six months and STD acquisition at 12 months. Mediating effects of sexual autonomy were tested via bootstrapping. Females were aged 14-21, and male partners were 14 or older. For females, IPV victimization at baseline was positively associated with the likelihood of acquiring a postpartum STD (coefficient, 0.4); level of sexual autonomy was inversely associated with the likelihood of acquiring an STD and of having a male partner who acquired one by the 12-month follow-up (-0.4 for each). For males, IPV victimization at baseline was negatively correlated with a female partner's sexual autonomy (-0.3) and likelihood of acquiring an STD (-0.7); victimization at six months was positively related to a partner's sexual autonomy (0.2). Sexual autonomy did not mediate these relationships. Females' sexual autonomy appears to protect against postpartum STDs for both partners. Future research should explore the efficacy of IPV-informed approaches to improving women's sexual and reproductive health. Copyright © 2018 by the Guttmacher Institute.

  13. An assessment of care provided by a public sector STD clinic in Cape Town.

    Science.gov (United States)

    Mathews, C; van Rensburg, A; Schierhout, G; Coetzee, N; Lombard, C J; Fehler, H G; Ballard, R C

    1998-11-01

    A study was undertaken in a Cape Town public sector STD clinic to evaluate the content and quality of care provided since it has been recognized that appropriate improvements in the management of conventional sexually transmitted diseases (STDs), including provision of correct therapy, health education, condom promotion and partner notification, could result in a reduced incidence of HIV infection. Our objectives were to assess patients' needs for health education and to assess the quality of STD management in terms of health education, condom promotion, partner notification, the validity of the clinical diagnoses and the adequacy of the treatments prescribed. The study subjects were sampled systematically, according to their gender. Patients included in the study were given a standardized interview and their clinical records reviewed. Specimens were collected for laboratory investigations. For each STD detected, the treatment was defined as adequate if drugs currently known to be active against that infection were prescribed. One hundred and seventy men and 161 women were included in the study (median age: females 22 years, males 26 years). While almost all patients believed their STD may have been caused by unprotected sexual intercourse, many also believed it may have been caused by other factors, such as bewitchment with traditional medicine. Only 21% of male and 37% of female patients received any education about STD transmission during the clinic visit, and only 25% of male and 36% of female patients received education about condom use. As a result of the low sensitivity of the clinicians' diagnoses, 16% of men and 61% of women left the clinic with at least one infection inadequately treated. The majority of patients were not receiving education for the prevention of STDs including HIV. Many were not receiving adequate treatment for their infections. The introduction of a syndromic management protocol in this setting would substantially reduce the proportion

  14. Prevalence of Hepatitis C Virus Antibody in Patients With Sexually Transmitted Diseases Attending a Harrisburg, PA, STD Clinic

    Directory of Open Access Journals (Sweden)

    Robert L. Sautter

    1994-01-01

    Full Text Available Objective: The prevalence of hepatitis B and hepatitis C in a sexually transmitted disease (STD clinic population was studied, along with the prevalence of various STD agents, in an attempt to identify possible STD markers for the hepatitis C virus and help delineate the role of hepatitis C as an STD. The hepatitis C antibody rates found in the STD clinic were also compared with those found among patients attending a local OB/GYN clinic and those enrolled in a blood donor program, all from the same geographical area.

  15. "Something of an adventure": postwar NIH research ethos and the Guatemala STD experiments.

    Science.gov (United States)

    Spector-Bagdady, Kayte; Lombardo, Paul A

    2013-01-01

    The STD experiments in Guatemala from 1946-1948 have earned a place of infamy in the history of medical ethics. But if the Guatemala STD experiments were so "ethically impossible," how did the U.S. government approve their funding? Although much of the literature has targeted the failings of Dr. John Cutler, we focus on the institutional context and research ethos that shaped the outcome of the research. After the end of WWII, Dr. Cassius Van Slyke reconstructed the federal research contracts process into a grant program. The inaugural NIH study section recommended approval of the Guatemala STD experiments at its first meeting. The funding and oversight process of the Guatemala research was marked with serious conflicts of interest and a lack of oversight, and it was this structure, as opposed to merely a maleficent individual, that allowed the Guatemala STD experiments to proceed. We conclude that while current research regulations are designed to prevent the abuses perpetrated on the subjects of the Guatemala STD experiments, it takes a comprehensive understanding of research ethics through professional education to achieve the longstanding ideal of the responsible investigator, and ensure ethical research under any regulatory scheme. © 2013 American Society of Law, Medicine & Ethics, Inc.

  16. Developing a Motion Comic for HIV/STD Prevention for Young People Ages 15-24, Part 1: Listening to Your Target Audience.

    Science.gov (United States)

    Willis, Leigh A; Kachur, Rachel; Castellanos, Ted J; Spikes, Pilgrim; Gaul, Zaneta J; Gamayo, Ashley C; Durham, Marcus; Jones, Sandra; Nichols, Kristen; Han Barthelemy, Solange; LaPlace, Lisa; Staatz, Colleen; Hogben, Matthew; Robinson, Susan; Brooks, John T; Sutton, Madeline Y

    2018-02-01

    Young people (15-24 years) in the United States are disproportionately affected by infection with human immunodeficiency virus (HIV) and sexually transmitted diseases (STD). Shortfalls in HIV/STD-related knowledge, attitudes, beliefs, and behavioral intentions (KABI) likely contribute to this discrepancy. In this report we describe our experience developing a novel means of health communication combining entertainment-education theory and recent technological advances to create a HIV/STD-focused "motion comic." We also report the audience satisfaction and acceptance of the intervention. We used the Health Belief Model (HBM), entertainment-education (EE) principles, and the Sabido Method (SM) and conducted three rounds of focus groups to develop a 38-minute HIV/STD focused motion comic for young people between the ages 15 and 24 years. Participants indicated that motion comics were an acceptable method of delivering HIV/STD prevention messages. They also expressed satisfaction with motion comics plot, story settings, the tone of humor, and drama. Our results suggest that motion comics are a viable new method of delivering health communication messages about HIV/STD and other public health issues, and warrant further development and broader evaluation.

  17. NASA-STD-7009 Guidance Document for Human Health and Performance Models and Simulations

    Science.gov (United States)

    Walton, Marlei; Mulugeta, Lealem; Nelson, Emily S.; Myers, Jerry G.

    2014-01-01

    Rigorous verification, validation, and credibility (VVC) processes are imperative to ensure that models and simulations (MS) are sufficiently reliable to address issues within their intended scope. The NASA standard for MS, NASA-STD-7009 (7009) [1] was a resultant outcome of the Columbia Accident Investigation Board (CAIB) to ensure MS are developed, applied, and interpreted appropriately for making decisions that may impact crew or mission safety. Because the 7009 focus is engineering systems, a NASA-STD-7009 Guidance Document is being developed to augment the 7009 and provide information, tools, and techniques applicable to the probabilistic and deterministic biological MS more prevalent in human health and performance (HHP) and space biomedical research and operations.

  18. HIV and STD Knowledge, Sexual Behaviors and Drug Taking Behaviors of Adolescents in Southern Russia

    Science.gov (United States)

    Kelley, R. Mark; Ball, Marcia; Cerullo, Jennie; Trunova, Elena

    2004-01-01

    For several years, HIV infection has increasing rapidly in Eastern Europe and Russia (UNAIDS, 2000, 2003). The purpose of the study was to investigate the HIV and STD knowledge, sexual behaviors and drug taking behaviors of adolescents in southern Russia. The instrument was compiled by the authors, professionally translated, and pilot tested. Most…

  19. Reference Material Kydex(registered trademark)-100 Test Data Message for Flammability Testing

    Science.gov (United States)

    Engel, Carl D.; Richardson, Erin; Davis, Eddie

    2003-01-01

    The Marshall Space Flight Center (MSFC) Materials and Processes Technical Information System (MAPTIS) database contains, as an engineering resource, a large amount of material test data carefully obtained and recorded over a number of years. Flammability test data obtained using Test 1 of NASA-STD-6001 is a significant component of this database. NASA-STD-6001 recommends that Kydex 100 be used as a reference material for testing certification and for comparison between test facilities in the round-robin certification testing that occurs every 2 years. As a result of these regular activities, a large volume of test data is recorded within the MAPTIS database. The activity described in this technical report was undertaken to mine the database, recover flammability (Test 1) Kydex 100 data, and review the lessons learned from analysis of these data.

  20. Charting a Path to Location Intelligence for STD Control.

    Science.gov (United States)

    Gerber, Todd M; Du, Ping; Armstrong-Brown, Janelle; McNutt, Louise-Anne; Coles, F Bruce

    2009-01-01

    This article describes the New York State Department of Health's GeoDatabase project, which developed new methods and techniques for designing and building a geocoding and mapping data repository for sexually transmitted disease (STD) control. The GeoDatabase development was supported through the Centers for Disease Control and Prevention's Outcome Assessment through Systems of Integrated Surveillance workgroup. The design and operation of the GeoDatabase relied upon commercial-off-the-shelf tools that other public health programs may also use for disease-control systems. This article provides a blueprint of the structure and software used to build the GeoDatabase and integrate location data from multiple data sources into the everyday activities of STD control programs.

  1. Salmonella enterica serotype Typhimurium Std fimbriae bind terminal α (1,2)fucose residues in the cecal mucosa

    Science.gov (United States)

    Chessa, Daniela; Winter, Maria G.; Jakomin, Marcello; Bäumler, Andreas J.

    2013-01-01

    SUMMARY The std operon encodes a fimbrial adhesin of Salmonella enterica serotype Typhimurium that is required for attachment to intestinal epithelial cells and for cecal colonization in the mouse. To study the mechanism by which this virulence factor contributes to colonization we characterized its binding specificity. Std-mediated binding to human colonic epithelial (Caco-2) cells could be abrogated by removing N-linked glycans. Adherence of Std fimbriated S. Typhimurium to Caco-2 cells could be blocked by co-incubation with H type 2 oligosaccharide (Fucα1-2Galβ1-4GlcNAc) or by pretreatment of cells with α1-2 fucosidase. In contrast, pretreatment of Caco-2 cells with neuraminidase or co-incubation with the type 2 disaccharide precursor (Galβ1-4GlcNAc) did not reduce adherence of Std fimbriated S. Typhimurium. Binding of purified Std fimbriae to Fucα1-2Galβ1-4GlcNAc in a solid phase binding assay was competitively inhibited by Ulex europaeus agglutinin-I (UEA-I), a lectin specific for Fucα1-2 moieties. Purified Std fimbriae and UEA both bound to a receptor localized in the mucus layer of the murine cecum. These data suggest that the std operon encodes an adhesin that binds an α1-2 fucosylated receptor(s) present in the cecal mucosa. PMID:19183274

  2. Antibodies to hepatitis A antigen in relation to the number of lifetime sexual partners in patients attending an STD clinic.

    OpenAIRE

    McFarlane, E S; Embil, J A; Manuel, F R; Thiébaux, H J

    1981-01-01

    Samples of serum from 421 patients attending a clinic for sexually transmitted diseases (STDs) were tested by radioimmunoassay for determination of the prevalence of antibodies to hepatitis A antigen (anti-HA). It was found that 42 . 4% of 33 homosexual men, 39 . 4% of 218 heterosexual men, and 38 . 8% of 170 female patients had positive results for anti-HA. The association between serological results and data on STD patients, using the variables of age, sexual type and preference, number of ...

  3. IEEE Std 383-1974: IEEE standard for type test of Class IE electric cables, field splices, and connections for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This standard provides direction for establishing type tests which may be used in qualifying Class 1E electric cables, field splices, and other connections for service in nuclear power generating stations. General guidelines for qualifications are given in IEEE Std 323-1974, Standard for Qualifying Class IE Electric Equipment for Nuclear Power Generating Stations. Categories of cables covered are those used for power control and instrumentation services. Though intended primarily to pertain to cable for field installation, this guide may also be used for the qualification of internal wiring of manufactured devices. This guide does not cover cables for service within the reactor vessel

  4. Enhanced signal dispersion in saturation transfer difference experiments by conversion to a 1D-STD-homodecoupled spectrum

    Energy Technology Data Exchange (ETDEWEB)

    Martin-Pastor, Manuel; Vega-Vazquez, Marino [Universidade de Santiago de Compostela, Laboratorio Integral de Dinamica e Estructura de Biomoleculas Jose R. Carracido, Unidade de Resonancia Magnetica, Edificio CACTUS, RIAIDT (Spain); Capua, Antonia De [Seconda Universita degli Studi di Napoli, Dipartimento di Scienze Ambientali (Italy); Canales, Angeles [Centro de Investigaciones Biologicas, CSIC, Departamento de Estructura y funcion de proteinas (Spain); Andre, Sabine; Gabius, Hans-Joachim [Ludwig-Maximilians-Universitaet, Institut fuer Physiologische Chemie, Tieraerztliche Fakultaet (Germany); Jimenez-Barbero, Jesus [Centro de Investigaciones Biologicas, CSIC, Departamento de Estructura y funcion de proteinas (Spain)], E-mail: JJbarbero@cib.csic.es

    2006-10-15

    The saturation transfer difference (STD) experiment is a rich source of information on topological aspects of ligand binding to a receptor. The epitope mapping is based on a magnetization transfer after signal saturation from the receptor to the ligand, where interproton distances permit this process. Signal overlap in the STD spectrum can cause difficulties to correctly assign and/or quantitate the measured enhancements. To address this issue we report here a modified version of the routine experiment and a processing scheme that provides a 1D-STD homodecoupled spectrum (i.e. an experiment in which all STD signals appear as singlets) with line widths similar to those in original STD spectrum. These refinements contribute to alleviate problems of signal overlap. The experiment is based on 2D-J-resolved spectroscopy, one of the fastest 2D experiments under conventional data sampling in the indirect dimension, and provides excellent sensitivity, a key factor for the difference experiments.

  5. Evaluation of the Positive Prevention HIV/STD Curriculum

    Science.gov (United States)

    LaChausse, Robert G.

    2006-01-01

    This study evaluated the effectiveness of Positive Prevention, a theory-based, HIV/STD prevention education curriculum for high school youth. Three hundred fifty-three students participated in a longitudinal experimental design to determine the impact of the curriculum on HIV/AIDS knowledge, self-efficacy to abstain from sex, self-efficacy of…

  6. Target-specific NMR detection of protein–ligand interactions with antibody-relayed {sup 15}N-group selective STD

    Energy Technology Data Exchange (ETDEWEB)

    Hetényi, Anasztázia [University of Szeged, Department of Medical Chemistry (Hungary); Hegedűs, Zsófia [University of Szeged, SZTE-MTA Lendület Foldamer Research Group, Institute of Pharmaceutical Analysis Department (Hungary); Fajka-Boja, Roberta; Monostori, Éva [Biological Research Center of the Hungarian Academy of Sciences, Lymphocyte Signal Transduction Laboratory, Institute of Genetics (Hungary); Kövér, Katalin E. [University of Debrecen, Department of Inorganic and Analytical Chemistry (Hungary); Martinek, Tamás A., E-mail: martinek@pharm.u-szeged.hu [University of Szeged, SZTE-MTA Lendület Foldamer Research Group, Institute of Pharmaceutical Analysis Department (Hungary)

    2016-12-15

    Fragment-based drug design has been successfully applied to challenging targets where the detection of the weak protein–ligand interactions is a key element. {sup 1}H saturation transfer difference (STD) NMR spectroscopy is a powerful technique for this work but it requires pure homogeneous proteins as targets. Monoclonal antibody (mAb)-relayed {sup 15}N-GS STD spectroscopy has been developed to resolve the problem of protein mixtures and impure proteins. A {sup 15}N-labelled target-specific mAb is selectively irradiated and the saturation is relayed through the target to the ligand. Tests on the anti-Gal-1 mAb/Gal-1/lactose system showed that the approach is experimentally feasible in a reasonable time frame. This method allows detection and identification of binding molecules directly from a protein mixture in a multicomponent system.

  7. Clinic-based intervention projects: STD and family planning programs get involved. Intervention model.

    Science.gov (United States)

    Finger, W R

    1991-06-01

    The sexually transmitted disease (STD) program in Udorn, a popular Thai tourist city, has worked closely with 750 prostitutes for 15 years, incorporating the concerns of brothel managers and prostitutes into service delivery. The program in Udorn is part of a nationwide network of STD clinics. The level of person-to-person interaction was increased once it was determined by 1989 that HIV had infected 6% of prostitutes in the city's brothels. Outreach educators were recruited and trained to ensure that all prostitutes in Udorn had the basic facts about HIV and AIDS. Over the last 2 years, the STD program has trained outreach educators to work in 8 brothels, started a local AIDS prevention foundation supported by local businessmen, and taken other steps to incorporate AIDS prevention into its clinic structure. Such clinic-based programs are an important way of targeting groups at high risk of HIV transmission.

  8. 77 FR 66469 - CDC/HRSA Advisory Committee on HIV, Viral Hepatitis and STD Prevention and Treatment

    Science.gov (United States)

    2012-11-05

    ... Advisory Committee on HIV, Viral Hepatitis and STD Prevention and Treatment In accordance with section 10(a...--Treatment as Prevention; (2) Ryan White HIV/AIDS Program Client Level Data Update; (3) Viral Hepatitis... Person for More Information: Margie Scott-Cseh, National Center for HIV/AIDS, Viral Hepatitis, STD, and...

  9. Overview - Be Smart. Be Well. STD Videos

    Centers for Disease Control (CDC) Podcasts

    2010-03-15

    This video, produced by Be Smart. Be Well., raises awareness of Sexually Transmitted Diseases (STDs): 1) What are they? 2) Why they matter? and, 3) What can I do about them? Footage courtesy of Be Smart. Be Well., featuring CDC's Dr. John Douglas, Division of Sexually Transmitted Disease Prevention.  Created: 3/15/2010 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 3/15/2010.

  10. E3 Testing of Directed Energy Systems: A Challenging Future

    National Research Council Canada - National Science Library

    Brown, Lyndell R

    2009-01-01

    .... Compatibility testing and susceptibility to electromagnetic radiation is required. Standards, such as MIL-STD-464 and MIL-STD-237D, are being revised to include HPM levels and frequencies for E3 tests...

  11. Just Diagnosed: Next Steps After Testing Positive for HIV

    Science.gov (United States)

    ... recommending an HIV regimen. Testing for sexually transmitted diseases (STDs) Coinfection with another STD can cause HIV infection to advance faster and increase the risk of HIV transmission to a sexual partner. STD testing makes it possible to detect ...

  12. Spread Spectrum Receiver Electromagnetic Interference (EMI) Test Guide

    Science.gov (United States)

    Wheeler, M. L.

    1998-01-01

    The objective of this test guide is to document appropriate unit level test methods and techniques for the performance of EMI testing of Direct Sequence (DS) spread spectrum receivers. Consideration of EMI test methods tailored for spread spectrum receivers utilizing frequency spreading, techniques other than direct sequence (such as frequency hopping, frequency chirping, and various hybrid methods) is beyond the scope of this test guide development program and is not addressed as part of this document EMI test requirements for NASA programs are primarily developed based on the requirements contained in MIL-STD-46 1 D (or earlier revisions of MIL-STD-46 1). The corresponding test method guidelines for the MIL-STD-461 D tests are provided in MIL-STD-462D. These test methods are well documented with the exception of the receiver antenna port susceptibility tests (intermodulation, cross modulation, and rejection of undesired signals) which must be tailored to the specific type of receiver that is being tested. Thus, test methods addressed in this guide consist only of antenna port tests designed to evaluate receiver susceptibility characteristics. MIL-STD-462D should be referred for guidance pertaining to test methods for EMI tests other than the antenna port tests. The scope of this test guide includes: (1) a discussion of generic DS receiver performance characteristics; (2) a summary of S-band TDRSS receiver operation; (3) a discussion of DS receiver EMI susceptibility mechanisms and characteristics; (4) a summary of military standard test guidelines; (5) recommended test approach and methods; and (6) general conclusions and recommendations for future studies in the area of spread spectrum receiver testing.

  13. National HIV Testing Day

    Centers for Disease Control (CDC) Podcasts

    2011-06-09

    Dr. Kevin A. Fenton, Director of CDC's National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention, discusses National HIV Testing Day, an annual observance which raises awareness of the importance of knowing one's HIV status and encourages at-risk individuals to get an HIV test.  Created: 6/9/2011 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 6/9/2011.

  14. Adherence to CDC Recommendations for the Treatment of Uncomplicated Gonorrhea - STD Surveillance Network, United States, 2016.

    Science.gov (United States)

    Weston, Emily J; Workowski, Kimberly; Torrone, Elizabeth; Weinstock, Hillard; Stenger, Mark R

    2018-04-27

    Gonorrhea, the sexually transmitted disease (STD) caused by Neisseria gonorrhoeae, is the second most common notifiable disease in the United States after chlamydia; 468,514 cases were reported to state and local health departments in 2016, an increase of 18.5% from 2015 (1). N. gonorrhoeae has progressively developed resistance to most antimicrobials used to treat the infection (2). As a result, CDC recommends two antimicrobials (250 mg of ceftriaxone [IM] plus 1 g of azithromycin [PO]) for treating uncomplicated gonorrhea to improve treatment efficacy and, potentially, to slow the emergence and spread of antimicrobial resistance. To monitor adherence to the current CDC-recommended regimen for uncomplicated gonorrhea, CDC reviewed enhanced data collected on a random sample of reported cases of gonorrhea in seven jurisdictions participating in the STD Surveillance Network (SSuN) and estimated the proportion of patients who received the CDC-recommended regimen for uncomplicated gonorrhea, by patient characteristics and diagnosing facility type. In 2016, the majority of reported patients with gonorrhea (81%) received the recommended regimen. There were no differences in the proportion of patients receiving the recommended regimen by age or race/ethnicity; however, patients diagnosed with gonorrhea in STD (91%) or family planning/reproductive health (94%) clinics were more likely to receive this regimen than were patients diagnosed in other provider settings (80%). These data document high provider adherence to CDC gonorrhea treatment recommendations in specialty STD clinics, indicating high quality of care provided in those settings. Local and state health departments should monitor adherence with recommendations in their jurisdictions and consider implementing interventions to improve provider and patient compliance with gonorrhea treatment recommendations where indicated.

  15. STD Testing: What's Right for You

    Science.gov (United States)

    ... testing for specific sexually transmitted infections. Chlamydia and gonorrhea Get screened annually if: You're a sexually ... in sexual activity against your will Chlamydia and gonorrhea screening is done either through a urine test ...

  16. Street Stories - Be Smart. Be Well. STD Videos

    Centers for Disease Control (CDC) Podcasts

    2010-03-15

    This video, produced by Be Smart. Be Well., raises awareness of Sexually Transmitted Diseases (STDs): 1) What are they? 2) Why they matter? and, 3) What can I do about them? Footage courtesy of Be Smart. Be Well.  Created: 3/15/2010 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 3/15/2010.

  17. Molly's Story - Be Smart. Be Well. STD Videos

    Centers for Disease Control (CDC) Podcasts

    2010-03-15

    This video, produced by Be Smart. Be Well., raises awareness of Sexually Transmitted Diseases (STDs): 1) What are they? 2) Why they matter? and, 3) What can I do about them? Footage courtesy of Be Smart. Be Well.  Created: 3/15/2010 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 3/15/2010.

  18. A study on sexually transmitted diseases in patients in a STD clinic in a district hospital in North India

    Directory of Open Access Journals (Sweden)

    Neerja Puri

    2014-07-01

    Full Text Available Introduction: The Sexually transmitted diseases (STDs are a global health problem of great magnitude. The pattern of STDs differs from country to country and from region to region. The increased risk of the transmission of HIV is known to be associated with the presence of sexually transmitted diseases (STDs and despite the presence of the National STD Control Program in India the number of people with STDs remains high. Aim: The aim of our study was to study the profile of patients in a STD clinic in North India and to study various sexually transmitted infections in both male and female patients. Material and Methods: A prospective study of the patients attending STD clinic in a district hospital in North India from December 2009 to December 2012 was done. A total of 2700 patients attending the STDclinic in three years from December 2009 to December 2012 were taken up for the study. Results: The commonest sexually transmitted infection in males was herpes genitalis (30% followed by 20% cases of genital warts. 10% patients had gonorrhoea, genital molluscum contagiosum, syphilis and genital scabies each and 5% patients had nongonococcal urethritis. Only 5% of the total patients had chancroid, donovanosis and LGV. The commonest sexually transmitted infection in females was vaginal discharge seen in 40% patients, lower abdominal pain in 20% patients, herpes genitalis in 15% patients followed by 20% cases of genital warts and syphilis each. Genital molluscum contagiosum was seen in 5% patients only. Conclusions: The treatment of STD’s is important as both non-ulcerative and ulcerative STDs increase the susceptibility to or transmissibility of HIV infection and as such, an increase in STD prevalence as revealed by clinic attendance in this study was bound to facilitate the spread of HIV/AIDS. Perhaps it is high time health planners adopted a more aggressive and result oriented HIV/AIDS/STD awareness campaign strategy.

  19. An audit of Colposcopy referrals from a GU/STD clinic

    Directory of Open Access Journals (Sweden)

    Ryan Ailis

    2008-06-01

    Full Text Available Abstract Background Cervical cancer is increasing at 1.5% per year in Ireland with 50% mortality giving 2.2% of all cancer deaths. In the Mid-West region a pilot screening programme has begun to screen all women 25–60 years. 66% of Genitourinary/Sexually transmitted disease (GU/STD clinics' abnormal smears are Methods 221(8.4% patients referred to colposcopy over 4 years were audited. Retrospective analysis was carried out on GU/STD clinic files, hospital files and computer records for biopsy reports. Ethical approval was prospectively granted. Results 2637 smears were carried out from November 1999 – September 2003. 221 patients referred to colposcopy were audited. 1%, 3%, 5% had severe, moderate and, mild dyskaryosis, respectively, on cervical screening while 0.8%, 1.2%, 1.5% had CIN3, CIN2, CIN1 abnormalities, respectively, on biopsy with 3.5% having no abnormality (Cervical Intraepithelial Neoplasia = CIN. 53% referred to colposcopy were Conclusion 2% had high grade lesions. 37% of high grade lesions are Of the high grade lesions 13% had Chlamydia trachomatis (27% of CIN3 and 44% had HPV despite Relative Risks (RR being 0.75 and 1.09 respectively. Older women had higher grade changes. No statistical difference was found for progression, regression and persistence in those over and under 25.

  20. Effects of a Social Network HIV/STD Prevention Intervention for Men Who Have Sex with Men in Russia and Hungary: A Randomized Controlled Trial

    Science.gov (United States)

    Amirkhanian, Yuri A.; Kelly, Jeffrey A.; Takacs, Judit; McAuliffe, Timothy L.; Kuznetsova, Anna V.; Toth, Tamas P.; Mocsonaki, Laszlo; DiFranceisco, Wayne J.; Meylakhs, Anastasia

    2015-01-01

    Objective To test a novel social network HIV risk reduction intervention for MSM in Russia and Hungary, where same-sex behavior is stigmatized and men may best be reached through their social network connections. Design A 2-arm trial with 18 sociocentric networks of MSM randomized to the social network intervention or standard HIV/STD testing/counseling. Setting St. Petersburg, Russia and Budapest, Hungary. Participants 18 “seeds” from community venues invited the participation of their MSM friends who, in turn, invited their own MSM friends into the study, a process that continued outward until eighteen 3-ring sociocentric networks (mean size=35 members, n=626) were recruited. Intervention Empirically-identified network leaders were trained and guided to convey HIV prevention advice to other network members. Main Outcome and Measures Changes in sexual behavior from baseline to 3- and 12-month followup, with composite HIV/STD incidence measured at 12-months to corroborate behavior changes. Results There were significant reductions between baseline, first followup, and second followup in the intervention versus comparison arm for proportion of men engaging in any unprotected anal intercourse (P=.04); UAI with a nonmain partner (P=.04); and UAI with multiple partners (P=.002). The mean percentage of unprotected AI acts significantly declined (P=.001), as well as the mean number of UAI acts among men who initially had multiple partners (P=.05). Biological HIV/STD incidence was 15% in comparison condition networks and 9% in intervention condition networks. Conclusions Even where same-sex behavior is stigmatized, it is possible to reach MSM and deliver HIV prevention through their social networks. PMID:25565495

  1. [Consecutive cross-sectional survey of prevalence of HIV infection/STD and related factors in Vietnamese female sex workers at a China-Vietnam border area, 2014-2015].

    Science.gov (United States)

    Zhu, J; Yuan, R; Hu, D; Zhu, Z B; Yang, X; Wang, N; Wang, B

    2017-05-10

    Objective: To investigate the prevalence of HIV infection/STD and related factors in Vietnamese female sex workers (FSWs). Methods: Consecutive cross-sectional surveys were conducted in June 2014, December 2014, May 2015 and November 2015 in Hekou, a county bordering Vietnam in Yunnan province. Convenience sampling were adopted to select 1 058 Vietnamese FSWs aged>16 years. Questionnaire interview were used to collect the information about their demographics, sexual behaviors and drug use. Serum and urine samples were collected for HIV infection/STD detection and drug use test. Trend χ (2) test was applied for HIV infection/STD and drug use trend analysis. Multivariate logistic regression model was used to identify the related factors. Results: The consecutive cross sectional surveys indicated that the prevalence of HIV infection in Vietnamese FSWs were 3.20 % (7/219), 2.04 % (5/245), 1.89 % (5/265) and 1.82 % (6/329) respectively; the HSV-2 positive rates were 57.08 % (125/219), 58.37 % (143/245), 38.11 % (101/265) and 51.06 % (168/329) respectively. In addition, the prevalence of syphilis were 0.91 % , 1.51 % , 0.75 % and 1.22 % respectively. HSV-2 infection prevalence showed a downward trend ( χ (2)=4.823, P =0.028). By logistic regression analysis, the related factors for HIV infection in Vietnamese FSWs were being amphetamine type stimulants (ATS) positive ( OR =10.18, 95 %CI : 4.33-23.92) and being HSV-2 positive ( OR =2.89, 95 %CI : 1.09-7.88); Age ( OR =1.88, 95 %CI : 1.32-2.61), no-paid sexual partner ( OR =1.59, 95 %CI : 1.26-2.01) and being ATS positive ( OR =2.48, 95 %CI : 1.10-5.57) were related factors for HSV-2 infection. Conclusions: Compared with the results of previous studies, the HIV infection prevalence declined in Vietnamese FSWs, but the HSV-2 infection prevalence was still high. The association between ATS use and HIV infection/STD suggested the necessity of strengthening AIDS intervention in Vietnamese FSWs, including the control of new

  2. Treatment of Mycoplasma genitalium. Observations from a Swedish STD clinic.

    Directory of Open Access Journals (Sweden)

    Carin Anagrius

    Full Text Available OBJECTIVES: To evaluate therapy for Mycoplasma genitalium infection with doxycycline or azithromycin 1 g compared to five days of azithromycin (total dose 1.5 g. METHODS: A retrospective case study was performed among patients attending the STD-clinic in Falun, Sweden 1998-2005. All patients with a positive PCR test for M. genitalium were routinely offered a test of cure (toc. Response to doxycycline for 9 days, azithromycin 1 g single dose and extended azithromycin (500 mg on day 1 followed by 250 mg o.d. for 4 days was determined. In patients with treatment failure after azithromycin, macrolide resistance was monitored before and after treatment. Furthermore, the rate of macrolide resistance was monitored for positive specimens available from 2006-2011. RESULTS: The eradication rate after doxycycline was 43% (48% for women and 38% for men, for azithromycin 1 g 91% (96% for women and 88% for men and for extended azithromycin 99% (100% for women and 93% for men. Macrolide resistance developed in 7/7 examined (100% of those testing positive after azithromycin 1 g, but in none of those treated with extended azithromycin. Macrolide resistance before treatment increased from 0% in 2006 and 2007 to 18% in 2011. CONCLUSIONS: These findings confirm the results from other studies showing that doxycycline is inefficient in eradicating M. genitalium. Although azithromycin 1 g was not significantly less efficient than extended dosage, it was associated with selection of macrolide resistant M. genitalium strains and should not be used as first line therapy for M. genitalium. Monitoring of M. genitalium macrolide resistance should be encouraged.

  3. Recent trends on Software Verification and Validation Testing

    International Nuclear Information System (INIS)

    Kim, Hyungtae; Jeong, Choongheui

    2013-01-01

    Verification and Validation (V and V) include the analysis, evaluation, review, inspection, assessment, and testing of products. Especially testing is an important method to verify and validate software. Software V and V testing covers test planning to execution. IEEE Std. 1012 is a standard on the software V and V. Recently, IEEE Std. 1012-2012 was published. This standard is a major revision to IEEE Std. 1012-2004 which defines only software V and V. It expands the scope of the V and V processes to include system and hardware as well as software. This standard describes the scope of V and V testing according to integrity level. In addition, independent V and V requirement related to software V and V testing in IEEE 7-4.3.2-2010 have been revised. This paper provides a recent trend of software V and V testing by reviewing of IEEE Std. 1012-2012 and IEEE 7-4.3.2-2010. There are no major changes of software V and V testing activities and tasks in IEEE 1012-2012 compared with IEEE 1012-2004. But the positions on the responsibility to perform software V and V testing are changed. In addition IEEE 7-4.3.2-2010 newly describes the positions on responsibility to perform Software V and V Testing. However, the positions of these standards on the V and V testing are different. For integrity level 3 and 4, IEEE 1012-2012 basically requires that V and V organization shall conduct all of V and V testing tasks such as test plan, test design, test case, and test procedure except test execution. If V and V testing is conducted by not V and V but another organization, the results of that testing shall be analyzed by the V and V organization. For safety-related software, IEEE 7-4.3.2-2010 requires that test procedures and reports shall be independently verified by the alternate organization regardless of who writes the procedures and/or conducts the tests

  4. Ida's Story - Be Smart. Be Well. STD Videos

    Centers for Disease Control (CDC) Podcasts

    2010-03-15

    This video, produced by Be Smart. Be Well., raises awareness of Sexually Transmitted Diseases (STDs): 1) What are they? 2) Why they matter? and, 3) What can I do about them? Footage courtesy of Be Smart. Be Well., featuring CDC's Dr. John Douglas, Division of Sexually Transmitted Disease Prevention.  Created: 3/15/2010 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 3/15/2010.

  5. DOE Handbook: Supplementary guidance and design experience for the fusion safety standards DOE-STD-6002-96 and DOE-STD-6003-96

    International Nuclear Information System (INIS)

    1999-01-01

    Two standards have been developed that pertain to the safety of fusion facilities. These are DOE- STD-6002-96, Safety of Magnetic Fusion Facilities: Requirements, and DOE-STD-6003-96, Safety of Magnetic Fusion Facilities: Guidance. The first of these standards identifies requirements that subscribers to that standard must meet to achieve safety in fusion facilities. The second standard contains guidance to assist in meeting the requirements identified inthefirst This handbook provides additional documentation on good operations and design practices as well as lessons learned from the experiences of designers and operators of previous fusion facilities and related systems. It is intended to capture the experience gained in the various fields and pass it on to designers of future fusion facilities as a means of enhancing success and safeiy. The sections of this document are presented according to the physical location of the major systems of a t%sion facility, beginning with the vacuum vessel and proceeding to those systems and components outside the vacuum vessel (the ''Ex-vessel Systems''). The last section describes administrative procedures that cannot be localized to specific components. It has been tacitly assumed that the general structure of the fusion facilities addressed is that of a tokamak though the same principles would apply to other magnetic confinement options

  6. DOE Handbook: Supplementary guidance and design experience for the fusion safety standards DOE-STD-6002-96 and DOE-STD-6003-96

    Energy Technology Data Exchange (ETDEWEB)

    None

    1999-01-01

    Two standards have been developed that pertain to the safety of fusion facilities. These are DOE- STD-6002-96, Safety of Magnetic Fusion Facilities: Requirements, and DOE-STD-6003-96, Safety of Magnetic Fusion Facilities: Guidance. The first of these standards identifies requirements that subscribers to that standard must meet to achieve safety in fusion facilities. The second standard contains guidance to assist in meeting the requirements identified in the first This handbook provides additional documentation on good operations and design practices as well as lessons learned from the experiences of designers and operators of previous fusion facilities and related systems. It is intended to capture the experience gained in the various fields and pass it on to designers of future fusion facilities as a means of enhancing success and safety. The sections of this document are presented according to the physical location of the major systems of a fusion facility, beginning with the vacuum vessel and proceeding to those systems and components outside the vacuum vessel (the "Ex-vessel Systems"). The last section describes administrative procedures that cannot be localized to specific components. It has been tacitly assumed that the general structure of the fusion facilities addressed is that of a tokamak though the same principles would apply to other magnetic confinement options.

  7. STD/AIDS prevention in Portuguese-speaking Africa: a review of the recent literature in the social sciences and health.

    Science.gov (United States)

    Monteiro, Simone

    2009-03-01

    The article reviews academic literature in the social sciences and health on the problems and challenges of STD/AIDS prevention in Portuguese-speaking African countries. Based on a bibliographic survey of the SciELO, PubMed, and Sociological Abstracts databases between 1997 and 2007, the research under review was organized into two groups, according to content. The first group of studies sought to understand STD/AIDS vulnerability among social groups by examining local cultural and socioeconomic factors as related to gender dynamics, sexuality, color/race, religion and health care. The second group encompassed critical assessments of shortcomings in the STD/AIDS educational messages delivered by governments and international agencies. Attention is called to the way in which the presence of traditional medicine systems and the occurrence of civil wars in the post-colonial period impact the STD/AIDS epidemic in the African countries under study.

  8. Incidence of herpes simplex virus type 2 infection in 5 sexually transmitted disease (STD) clinics and the effect of HIV/STD risk-reduction counseling.

    Science.gov (United States)

    Gottlieb, Sami L; Douglas, John M; Foster, Mark; Schmid, D Scott; Newman, Daniel R; Baron, Anna E; Bolan, Gail; Iatesta, Michael; Malotte, C Kevin; Zenilman, Jonathan; Fishbein, Martin; Peterman, Thomas A; Kamb, Mary L

    2004-09-15

    The seroincidence of herpes simplex virus type 2 (HSV-2) infection was determined among 1766 patients attending sexually transmitted disease (STD) clinics and enrolled in a randomized, controlled trial of human immunodeficiency virus (HIV)/STD risk-reduction counseling (RRC). Arm 1 received enhanced RRC (4 sessions); arm 2, brief RRC (2 sessions); and arm 3, the control arm, brief informational messages. The overall incidence rate was 11.7 cases/100 person-years (py). Independent predictors of incidence of HSV-2 infection included female sex; black race; residence in Newark, New Jersey; new HSV-2 infections were diagnosed clinically. Incidence rates were 12.9 cases/100 py in the control arm, 11.8 cases/100 py in arm 2, and 10.3 cases/100 py in arm 1 (hazard ratio, 0.8 [95% confidence interval, 0.6-1.1], vs. controls). The possible benefit of RRC in preventing acquisition of HSV-2 infection offers encouragement that interventions more specifically tailored to genital herpes may be useful and should be an important focus of future studies.

  9. A novel integration effort to reduce the risk for alcohol-exposed pregnancy among women attending urban STD clinics.

    Science.gov (United States)

    Hutton, Heidi E; Chander, Geetanjali; Green, Patricia P; Hutsell, Catherine A; Weingarten, Kimberly; Peterson, Karen L

    2014-01-01

    Alcohol-exposed pregnancy (AEP) is a significant public health problem in the United States. Sexually transmitted disease (STD) clinics serve female clients with a high prevalence of heavy alcohol consumption coupled with ineffective contraceptive use. Project CHOICES (Changing High-Risk AlcOhol Use and Increasing Contraception Effectiveness) is an evidence-based, brief intervention to lower risk of AEP by targeting alcohol and contraceptive behaviors through motivational interviewing and individualized feedback. We describe our experience integrating and implementing CHOICES in STD clinics. This endeavor aligns with CDC's National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention's program collaboration and service integration strategic priority to strengthen collaborative work across disease areas and integrate services provided by related programs at the client level.

  10. Charting a Path to Location Intelligence for STD Control

    OpenAIRE

    Gerber, Todd M.; Du, Ping; Armstrong-Brown, Janelle; McNutt, Louise-Anne; Coles, F. Bruce

    2009-01-01

    This article describes the New York State Department of Health's GeoDatabase project, which developed new methods and techniques for designing and building a geocoding and mapping data repository for sexually transmitted disease (STD) control. The GeoDatabase development was supported through the Centers for Disease Control and Prevention's Outcome Assessment through Systems of Integrated Surveillance workgroup. The design and operation of the GeoDatabase relied upon commercial-off-the-shelf ...

  11. Masculinity, vulnerability and prevention of STD/HIV/AIDS among male adolescents: social representations in a land reform settlement

    Directory of Open Access Journals (Sweden)

    Camila de Oliveira Arraes

    2013-12-01

    Full Text Available OBJECTIVE: to analyze the relationship of masculinity, vulnerability and prevention of STD / HIV / AIDS among adolescent males of a land reform settlement in central Brazil. METHOD: a qualitative study using as precepts the strands of social representations with teenagers between 12 to 24 years. RESULTS: three categories emerged - Perception of vulnerability; Gender and vulnerability; and, Prevention and vulnerability to STD / HIV / AIDS. Adolescents felt invulnerable to sexually transmitted diseases anchored in the social representations in favor of the male hegemony. An ignorance about forms of prevention for STD / HIV / AIDS was demonstrated in their statements. It is believed that institutional projects such as the School Health Program and the Men's Health Care Program constitute essential tools to minimize factors of vulnerability in this population, since the school is recognized as a social facility that promotes socialization of experiences and contributes to the construction of the identity of the adolescent. CONCLUSION: the social representations of masculinity collaborate for the vulnerable behavior of the adolescents for the acquisition of sexually transmitted diseases. One hopes that this study can contribute to the production of knowledge and technical-scientific improvement of the professionals, especially the nurse, in order to discuss issues related to male sexuality of adolescents in the situation of the land reform settlement.

  12. What Is It? - Be Smart. Be Well. STD Videos

    Centers for Disease Control (CDC) Podcasts

    2010-03-15

    This video, produced by Be Smart. Be Well., raises awareness of Sexually Transmitted Diseases (STDs): 1) What are they? 2) Why they matter? and, 3) What can I do about them? Footage courtesy of Be Smart. Be Well., featuring CDC's Dr. John Douglas, Division of Sexually Transmitted Disease Prevention.  Created: 3/15/2010 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 3/15/2010.

  13. Calibration of the Lawrence Livermore National Laboratory Passive-Active Neutron Drum Shuffler for Measurement of Highly Enriched Uranium in Oxides within DOE-STD-3013-2000 Containers

    International Nuclear Information System (INIS)

    Mount, M E; O'Connell, W J

    2005-01-01

    Lawrence Livermore National Laboratory (LLNL) uses the LLNL passive-active neutron drum (PAN) shuffler (Canberra Model JCC-92) for accountability measurement of highly enriched uranium (HEU) oxide and HEU in mixed uranium-plutonium (U-Pu) oxide. In June 2002, at the 43rd Annual Meeting of the Institute of Nuclear Material Management, LLNL reported on an extensive effort to calibrate this shuffler, based on standards measurements and extensive simulations, for HEU oxides and mixed U-Pu oxides in thin-walled primary and secondary containers. In August 2002, LLNL began to also use DOE-STD-3013-2000 containers for HEU oxide and mixed U-Pu oxide. These DOE-STD-3013-2000 containers are comprised of a stainless steel convenience can enclosed in welded stainless steel primary and secondary containers. Compared to the double thin-walled containers, the DOE-STD-3013-2000 containers have substantially thicker walls, and the density of materials in these containers was found to extend over a greater range (1.35 g/cm 3 to 4.62 g/cm 3 ) than foreseen for the double thin-walled containers. Further, the DOE-STD-3013-2000 Standard allows for oxides containing at least 30 wt% Pu plus U whereas the calibration algorithms for thin-walled containers were derived for virtually pure HEU or mixed U-Pu oxides. An initial series of Monte Carlo simulations of the PAN shuffler response to given quantities of HEU oxide and mixed U-Pu oxide in DOE-STD-3013-2000 containers was generated and compared with the response predicted by the calibration algorithms for thin-walled containers. Results showed a decrease on the order of 10% in the count rate, and hence a decrease in the calculated U mass for measured unknowns, with some varying trends versus U mass. Therefore a decision was made to develop a calibration algorithm for the PAN shuffler unique to the DOE-STD-3013-2000 container. This paper describes that effort and selected unknown item measurement results

  14. HIV, other STD, and pregnancy prevention education in public secondary schools -- 45 states, 2008-2010.

    Science.gov (United States)

    2012-04-06

    In the United States, 46% of high school students have had sexual intercourse and potentially are at risk for human immunodeficiency virus (HIV) infection, other sexually transmitted diseases (STDs), and pregnancy. The National HIV/AIDS Strategy for the United States recommends educating young persons about HIV before they begin engaging in behaviors that place them at risk for HIV infection. The Community Preventive Services Task Force (CPSTF) also recommends risk reduction interventions to prevent HIV, other STDs, and pregnancy among adolescents. To estimate changes in the percentage of secondary schools that teach specific HIV, other STD, and pregnancy risk reduction topics, a key intervention consistent with those supported by the National HIV/AIDS Strategy and CPSTF, CDC analyzed 2008 and 2010 School Health Profiles data for public secondary schools in 45 states. This report summarizes the results of those analyses, which indicated that in 2010, compared with 2008, the percentage of secondary schools teaching 11 topics on HIV, other STD, and pregnancy prevention in a required course in grades 6, 7, or 8 was significantly lower in 11 states and significantly higher in none; the percentage of secondary schools teaching eight topics in a required course in grades 9, 10, 11, or 12 was significantly lower in one state and significantly higher in two states; and the percentage of secondary schools teaching three condom-related topics in a required course in grades 9, 10, 11, or 12 was significantly lower in eight states and significantly higher in three states. Secondary schools can increase efforts to teach all age-appropriate HIV, other STD, and pregnancy prevention topics to help reduce risk behaviors among students.

  15. The effect of target's physical attractiveness and dominance on STD-risk perceptions

    NARCIS (Netherlands)

    Dijkstra, P; Buunk, BP; Blanton, H

    Utilizing a 2 x 2 design, the present study examined the effect of a female's physical attractiveness and dominance on men's sexual motivation and sexually transmitted disease (STD) risk perceptions in a sample of 72 heterosexual male college students. As predicted, participants a ere more motivated

  16. Technical basis for storage of elastomer-sealed produce cans in the DOE-STD-3013-94 package

    International Nuclear Information System (INIS)

    Horrell, D.R.; Stakebake, J.L.; Szempruch, R.W.

    1996-11-01

    Department of Energy standard DOE-STD-3013-94 establishes criteria for the long-term packaging of plutonium metal and oxide. The inclusion of organic materials in sealed packages of plutonium may produce gases that contribute to container pressurization. To expedite processing, it would be desirable to permit, within the DOE-outlined criteria, limited amounts of organic materials to be used as a sealing gasket in some packaging containers. This paper presents a technical basis for allowing elastomer-sealed cans to be packaged inside the sealed inner container of a double weld-sealed DOE-STD-3013-94 container system

  17. Reducing offensiveness of STD prevention advertisements in China.

    Science.gov (United States)

    Waller, David S; Fam, Kim-Shyan

    2011-01-01

    The issue of sexually transmitted diseases is a socially sensitive one in Asian communities, with governments being criticized for not doing enough to reduce AIDS transmission, and the advertising of such issues potentially causing offense to people. This article surveys 630 people in China to determine their level of offense toward the advertising of condoms and STD prevention and analyzes the qualitative responses to how they would reduce the offensiveness of such advertising. The results found that generally women are more offended by the advertising of these products than men, and in terms of creative execution, women prefer implicit, prevention or effects messages, whereas men suggested a scientific message, or a focus on the creative strategy or media/location of the advertisement. It is recommended that traditional Chinese Confucian values are important for public policy makers to keep in mind when wanting to advertise socially sensitive issues in China and wider Asia.

  18. Design and implementation of STD32-BUS based reactor protection trip unit on FPGA imbaby

    International Nuclear Information System (INIS)

    Mahmoud, I.; Elnokity, O.A.; Refai, M.K.

    2007-01-01

    This paper presents a way to design and implement the Trip Unit of a Reactor Protection System (RPS) using a Field Programmable Gate Arrays (FPGA). Instead of the traditional embedded Microprocessor based interface design method, a proposed tailor made FPGA based circuit is built to substitute the Trip Unit (TL1) existing in Egypt's 2' ' Research reactor ETRR-2. The existing embedded system is built around the STD32 field Computer Bus which used in industrial and process control applications. It is modular, rugged, reliable, and easy-to-use and is able to support a large mix of I/O cards and to easily change its configuration in the future. Therefore, the state machine of this bus is extracted from its timing diagrams and implemented in VHDL to interface the designed TU circuit. The proposed designed circuit implemented using ALTERA EPF10K10LC84-3 chip replaces the Single Board Computer which have the embedded SAY program of the TU providing the same integrated HAV and SAV functions implemented in FPGA Chip housed in an printed circuit board, which uses the same shape and specifications of STD32 boards. H/W implementation of both TU and STD32 Bus in VHDL addresses the issues of safety and reusability

  19. Lawrence Livermore National Laboratory Measurements of Plutonium-bearing Oxide in DOE-STD-3013-2000 Containers Using Calorimetry and Gamma Isotopic Analyses

    International Nuclear Information System (INIS)

    Dearborn, D M; Keeton, S C

    2004-01-01

    Lawrence Livermore National Laboratory (LLNL) routinely uses calorimetry and gamma isotopic analyses (Cal/Iso) for the accountability measurement of plutonium (Pu) bearing items. In the past 15 years, the vast majority of those items measured by Cal/Iso were contained in a thin-walled convenience can enclosed in another thin-walled outer container. However, LLNL has recently begun to use DOE-STD-3013-2000 containers as well. These DOE-STD-3013-2000 containers are comprised of a stainless steel convenience can enclosed in welded stainless steel primary and secondary containers. In addition to the fact that the wall thickness of the DOE-STD-3013-2000 containers is much greater than that of other containers in our experience, the DOE-STD-3013-2000 containers appear to have larger thermal insulation characteristics. To date, we have derived Pu-mass values from Cal/Iso measurements of 74 different DOE-STD-3013-2000 containers filled with Pu-bearing oxide or mixed uranium-plutonium (U-Pu) oxide material. Both water-bath and air-bath calorimeters were used for these measurements and both use software to predict when thermal equilibrium is attained. Our experience has shown that after apparent equilibrium has been attained, at least one more complete cycle, and sometimes two or three more complete cycles, is required to gain a measure of true thermal equilibrium. Otherwise, the derived Pu-mass values are less than would be expected from a combination of previously measured Pu-bearing items and would contribute to increased loss in our inventory difference determinations. Conclusions and recommendations drawn from LLNL experience with measurements of Pu mass in Pu-bearing oxide or mixed U-Pu oxide in DOE-STD-3013-2000 containers using the Cal/Iso technique are included

  20. Club Drugs and HIV/STD Infection: An Exploratory Analysis among Men Who Have Sex with Men in Changsha, China

    Science.gov (United States)

    Zheng, Jun; Zhao, Junshi; He, Jianmei; Zhang, Guoqiang; Tang, Xuemin

    2015-01-01

    Objective To evaluate current club drug use and its potential association with the transmission of HIV/STD among Changsha men who have sex with men (MSM). Method A cross-sectional survey was conducted by using self-administered questionnaires including information regarding socio-demographics, club drug use, high-risk behaviors, and HIV/STD infections. Multiple methods including venue-based, peer referral using “snowball” techniques, and internet advertisements were used to recruit study participants. Results Of the 826 participants, 177 (21.4%) reported that they had used club drugs at some time before or during sex in the past six months. MSM with young age, low education level, and seeking partners through the internet or bars were the main population who used drugs. Poppers were the most common drug used among Changsha MSM. The prevalence of HIV, syphilis, and herpes simplex virus-2 were higher among drug users. There were no significant differences in unprotected sexual intercourse and condom use between drug users and non-users. Compared with non-users, risk behaviors such as group sex, multiple sex partners, and sex with foreigners were more frequent among drug users. Conclusion Club drug use is common among Changsha MSM, and is related to unsafe sex activities and HIV/STD infection. It is necessary to build novel targeted HIV prevention strategies to monitor and reduce club drug use among MSM. PMID:25950912

  1. 40 CFR 1054.310 - How must I select engines for production-line testing?

    Science.gov (United States)

    2010-07-01

    ...% confidence intervals for a one-tail distribution. σ = Test sample standard deviation (see paragraph (c)(2) of this section). x = Mean of emission test results of the sample. STD = Emission standard (or family...)). (e) After each new test, recalculate the required sample size using the updated mean values, standard...

  2. A STD-NMR Study of the Interaction of the Anabaena Ferredoxin-NADP+ Reductase with the Coenzyme

    Directory of Open Access Journals (Sweden)

    Lara V. Antonini

    2014-01-01

    Full Text Available Ferredoxin-NADP+ reductase (FNR catalyzes the electron transfer from ferredoxin to NADP+ via its flavin FAD cofactor. To get further insights in the architecture of the transient complexes produced during the hydride transfer event between the enzyme and the NADP+ coenzyme we have applied NMR spectroscopy using Saturation Transfer Difference (STD techniques to analyze the interaction between FNRox and the oxidized state of its NADP+ coenzyme. We have found that STD NMR, together with the use of selected mutations on FNR and of the non-FNR reacting coenzyme analogue NAD+, are appropriate tools to provide further information about the the interaction epitope.

  3. Climatic Environmental Test Facilities

    Data.gov (United States)

    Federal Laboratory Consortium — RTTC has an extensive suite of facilities for supporting MIL-STD-810 testing, toinclude: Temperature/Altitude, Rapid Decompression, Low/High Temperature,Temperature...

  4. Nurses' perceptions of the vulnerabilities to STD/AIDS in light of the process of adolescence

    OpenAIRE

    Silva, Ítalo Rodolfo; Gomes, Antonio Marcos Tosoli; Valadares, Glaucia Valente; Santos, Nereida Lúcia Palko dos; Silva, Thiago Privado da; Leite, Joséte Luzia

    2015-01-01

    Objective: to understand the perception of nurses on the vulnerabilities to STD/AIDS in light of the process of adolescence.Method: qualitative research conducted with 15 nurses in a centre for the studies of adolescent healthcare of a university hospital in Rio de Janeiro/Brazil. The adopted theoretical and methodological frameworks were the Complexity Theory and the Grounded Theory, respectively. The semi-structured interview was used to collect data from January to August 2012.Results: thi...

  5. β-Lactam antibiotics epitope mapping with STD NMR spectroscopy: a study of drug-human serum albumin interaction

    International Nuclear Information System (INIS)

    Milagre, Cintia D. F.; Cabeca, Luis F.; Almeida, Wanda P.; Marsaioli, Anita J.

    2012-01-01

    Molecular recognition events are key issues in many biological processes. STD NMR (saturation transfer difference nuclear magnetic resonance spectroscopy) is one of the techniques used to understand such biological interactions. Herein, we have investigated the interactions of four β-lactam antibiotics belonging to two classes (cephalosporins and penicillins) with human serum albumin (HSA) by 1 H STD NMR revealing that the interaction between the aromatic moiety and HSA is responsible for the binding efficiency. Thus, the structural differences from the five to six-membered thio ring in penicillins and cephalosporins do not seem to influence antibiotic albumin interactions. (author)

  6. Seismic design and evaluation criteria for DOE facilities (DOE-STD-1020-XX)

    International Nuclear Information System (INIS)

    Short, S.A.; Kennedy, R.P.; Murray, R.C.

    1993-01-01

    Seismic design and evaluation criteria for DOE facilities are provided in DOE-STD-1020-XX. The criteria include selection of design/evaluation seismic input from probabilistic seismic hazard curves combined with commonly practiced deterministic response evaluation methods and acceptance criteria with controlled levels of conservatism. Conservatism is intentionally introduced in specification of material strengths and capacities, in the allowance of limited inelastic behavior and by a seismic load factor. These criteria are based on the performance or risk goals specified in DOE 5480.28. Criteria have been developed following a graded approach for several performance goals ranging from that appropriate for normal-use facilities to that appropriate for facilities involving hazardous or critical operations. Performance goals are comprised of desired behavior and of the probability of not achieving that behavior. Following the seismic design/evaluation criteria of DOE-STD-1020-XX is sufficient to demonstrate that the probabilistic performance or risk goals are achieved. The criteria are simple procedures but with a sound, rigorous basis for the achievement of goals

  7. 40 CFR 1048.310 - How must I select engines for production-line testing?

    Science.gov (United States)

    2010-07-01

    ... intervals for a one-tail distribution. σ = Test sample standard deviation (see paragraph (c)(2) of this section). x = Mean of emission test results of the sample. STD = Emission standard. (1) Determine the 95...)). (e) After each new test, recalculate the required sample size using the updated mean values, standard...

  8. 40 CFR 1045.310 - How must I select engines for production-line testing?

    Science.gov (United States)

    2010-07-01

    ... select and test one more engine. Then, calculate the required sample size for the model year as described.... It defines 95% confidence intervals for a one-tail distribution. σ = Test sample standard deviation (see paragraph (c)(2) of this section). x = Mean of emission test results of the sample. STD = Emission...

  9. MIL-STD-1553B Marconi LSI chip set in a remote terminal application

    Science.gov (United States)

    Dimarino, A.

    1982-11-01

    Marconi Avionics is utilizing the MIL-STD-1553B LSI Chip Set in the SCADC Air Data Computer application to perform all of the required remote terminal MIL-STD-1553B protocol functions. Basic components of the RTU are the dual redundant chip set, CT3231 Transceivers, 256 x 16 RAM and a Z8002 microprocessor. Basic transfers are to/from the RAM command of the bus controller or Z8002 processor. During transfers from the processor to the RAM, the chip set busy bit is set for a period not exceeding 250 microseconds. When the transfer is complete, the busy bit is released and transfers to the data bus occur on command. The LSI Chip Set word count lines are used to locate each data word in the local memory and 4 mode codes are used in the application: reset remote terminal, transmit status word, transmitter shut-down, and override transmitter shutdown.

  10. GenBank blastx search result: AK061794 [KOME

    Lifescience Database Archive (English)

    Full Text Available AK061794 001-039-F11 AF031161.1 Pseudomonas sp. VLB120 styrene degradation genes in...cluding histidine kinase (stdSc) gene, partial cds; and transcriptional activator (stdR), styrene monooxygen...ase large component (stdA), styrene monooxygenase small component (stdB), styrene oxide isomerase (stdC), an

  11. Studies to demonstrate the adequacy of testing results of the qualification tests for the actuator of main steam safety relive valves (MSSRV) in an advanced boiling water reactor (ABWR)

    International Nuclear Information System (INIS)

    Gou, P.F.; Patel, R.; Curran, G.; Henrie, D.; Solorzano, E.

    2005-01-01

    This paper presents several studies performed to demonstrate that the testing results from the qualification tests for the actuator of the Main Steam Safety Relief Valves (MSSRV; also called SRV in this paper) in GE's Advanced Boiling Water Reactor (ABWR) are in compliance with the qualification guidelines stipulated in the applicable IEEE standards. The safety-related function of the MSSRV is to relieve pressure in order to protect the reactor pressure vessel from over-pressurization condition during normal operation and design basis events. In order to perform this function, the SRV must actuate at a given set pressure while maintaining the pressure and structural integrity of the SRV. The valves are provided with an electro-pneumatic actuator assembly that opens the valve upon receipt of an automatic or manually initiated electric signal to allow depressurization of the reactor pressure vessel (RPV). To assure the SRV can perform its intended safety related functions properly, qualification tests are needed in addition to analysis, to demonstrate that the SRV can withstand the specified environmental, dynamic and seismic design basis conditions without impairing its safety related function throughout their installed life under the design conditions including postulated design basis events such as OBE loads and Faulted (SSE) events. The guidelines used for the test methods, procedures and acceptance criteria for the qualification tests are established in IEEE std 344-1987 and IEEE std 382-1985. In the qualification tests, the specimen consists of the actuator, control valve assembly, limit switches, and limit switch support structure. During the functional, dynamic and seismic tests, the test specimen was mounted on a SRV. Qualification of safety related equipment to meet the guidelines of the IEEE standards is typically a two-step process: 1) environmental aging and 2) design basis events qualification. The purpose of the first step is to put the equipment in an

  12. Anticipated Notification of Sexual Partners following STD Diagnosis among Men Who Have Sex with Men and Transgender Women in Lima, Peru: A Mixed Methods Analysis

    Science.gov (United States)

    Clark, Jesse L.; Perez-Brumer, Amaya G.; Segura, Eddy R.; Salvatierra, Hector J.; Sanchez, Jorge; Lama, Javier R.

    2016-01-01

    Background New strategies to support partner notification (PN) are critical for STD control and require detailed understanding of how specific individual and partnership characteristics guide notification decisions. Methods From 2011 to 2012, 397 MSM and TW recently diagnosed with HIV, syphilis, or another STD completed a survey on anticipated notification of recent sexual partners and associated factors. Qualitative interviews were conducted with a subset of participants to provide further depth to quantitative findings. Prevalence ratios and generalized estimating equation (GEE) models were used to analyze participant- and partner-level factors associated with anticipated PN. Results Among all partners reported, 52.5% were described as “Very Likely” or “Somewhat Likely” to be notified. Anticipated notification was more likely for main partners than casual (adjusted Prevalence Ratio [aPR], 95% CI: 0.63, 0.54–0.75) or commercial (aPR, 95% CI: 0.44, 0.31–0.62) partners. Other factors associated with likely notification included perception of the partner as an STD source (aPR, 95% CI: 1.27, 1.10–1.48) and anticipated future sexual contact with the partner (aPR, 95% CI: 1.30, 1.11–1.52). An HIV diagnosis was associated with a lower likelihood of notification than non-HIV STDs (aPR: 0.68, 0.55–0.86). Qualitative discussion of the barriers and incentives to PN reflected a similar differentiation of anticipated notification according to partnership type and type of HIV/STD diagnosis. Discussion Detailed attention to how partnership characteristics guide notification outcomes is essential to the development of new PN strategies. By accurately and thoroughly assessing the diversity of partnership interactions among individuals with HIV/STD, new notification techniques can be tailored to partner-specific circumstances. PMID:27685158

  13. Mycoplasma genitalium Compared to Chlamydia, Gonorrhea and Trichomonas as an Etiologic Agent of Urethritis in Men Attending STD Clinics

    Science.gov (United States)

    Gaydos, Charlotte; Maldeis, Nancy E.; Hardick, Andrew; Hardick, Justin; Quinn, Thomas C.

    2009-01-01

    Objectives This purpose of this study was to investigate prevalence of M. genitalium C. trachomatis, N. gonorrhoeae, and T. vaginalis in men, frequency of coinfections, and relationships among organisms with urethritis in men. Methods This was a cross-sectional study of 290 men (age range 19-34 yr) attending Baltimore City STD Clinics. M. genitalium, C. trachomatis, N. gonorrhoeae, and T. vaginalis, during 2004 were detected using nucleic acid amplification tests (NAATs). (N = 153 with urethritis and 137 without urethritis). Demographic characteristics and risk factors were ascertained. Results The overall prevalences of infection with C. trachomatis, N. gonorrhoeae, T. vaginalis, and M. genitalium, were 20.3%, 12.8%, 3.4%, and 15.2% respectively. Prevalences in men with urethritis were 32.7%, 24.2%, 5.2%, and 22.2% for C. trachomatis, N. gonorrhoeae, T. vaginalis, and M. genitalium, respectively. Percentages of coinfections were high. All men with N. gonorrhoeae had urethritis. C. trachomatis and M. genitalium were found to be significantly associated with urethritis in univariate analysis and in multiple logistic regression analysis. Conclusion The association of M. genitalium with urethritis in this study provides confirmation of the importance of screening men for M. genitalium as a cause of non-gonococcal urethritis and supports treatment considerations for urethritis for agents other than gonococci and chlamydia. Short Summary Men attending STD clinics were found to have high prevalences of M. genitalium (MG), C. trachomatis (CT), and N. gonorrhoeae (NG); moderate prevalence of T. vaginalis. MG was associated with urethritis in addition to NG and CT. PMID:19383597

  14. Using community-based participatory research to develop an intervention to reduce HIV and STD infections among Latino men.

    Science.gov (United States)

    Rhodes, Scott D; Hergenrather, Kenneth C; Montaño, Jaime; Remnitz, Ivan M; Arceo, Ramiro; Bloom, Fred R; Leichliter, Jami S; Bowden, W Patrick

    2006-10-01

    Although the Latino community living in the United States has been disproportionately affected by the intersecting epidemics of HIV and sexually transmitted diseases (STDs), the development, implementation, and evaluation of HIV and STD prevention interventions designed to reduce infection among Latinos lags behind prevention efforts targeting other communities. HoMBReS: Hombres Manteniendo Bienestar y Relaciones Saludables is a sexual risk reduction intervention designed to reduce HIV and STD infection among recently arrived, non-English-speaking Latino men who are members of a multicounty Latino soccer league in central North Carolina, a region of the United States with both the fastest growing Latino population and disproportionate HIV and STD infection rates. HoMBReS was developed in partnership with the local Latino community using community-based participatory research (CBPR). We describe (a) the CBPR partnership history and further expansion; (b) the development of the intervention through the integration of collected formative data, theoretical considerations, and findings from the scientific literature; and (c) lessons learned while using a CBPR approach to develop HoMBReS.

  15. Environmental qualification test of electrical penetration for nuclear power stations

    International Nuclear Information System (INIS)

    Kooziro, Tetsuya; Nakagawa, Akitoshi; Toyoda, Shigeru; Uno, Shunpei

    1979-01-01

    Environmental qualification test was conducted according to IEEE Std. 323-1974 in order to evaluate the safety and reliability of electrical penetration of PWR type nuclear power station. Electrical penetration is the assemblies of electric cables attached to the containment vessel and penetrate through the vessel. Since it is a part of the vessel, it is deemed to be one of the primary safety equipments that are important for the safety and reliability of nuclear power stations. Environmental tests were conducted continuously as to heat cycle, vibration and LOCA with the full size specimens of bushing type, pigtail type and triaxial cable type and at the same time thermal life and irradiation tests were conducted on the insulation materials used, in order to obtain the comprehensive evaluation of their electrical and mechanical characteristics. As the result, they all satisfied the requirements for the circuits for actual use during and after various environmental qualification tests according to IEEE Std. 323. (author)

  16. [Epidemiological study on HIV/AIDS in Cambodia seroprevalence of HIV/STD among commercial sex workers].

    Science.gov (United States)

    Ohshige, K; Morio, S; Mizushima, S; Kitamura, K; Tajima, K; Ito, A; Suyama, A; Usuku, S; Phalla, T; Leng, H B; Sopheab, H; Eab, B; Soda, K

    1999-01-01

    To describe epidemiological features of HIV prevalence among female commercial sex workers (CSWs) in Cambodia, a cross-sectional study using a questionnaire study and serological tests was carried out from December 1997 to January 1998. We report the main results of the analyses of serological tests in this article. Two hundred ninety six CSWs working in Sisophon and Poi Pet, located in northwest Cambodia, Bantey Mean Chey province, were recruited for interview based on a questionnaire on sexual behavior, and serological tests. The blood samples were examined for HIV antibody, Chlamydia trachomatis IgG antibody, TPHA, Hepatitis B surface antigen, and Hepatitis B surface antibody. The relationship between HIV and the other STD's was analyzed by using logistic regression analysis. The HIV seroprevalence rate was 43.9% (130 out of 296). The seropositive rate of Chlamydia trachomatis IgG antibody (C.T.-IgG-Ab) was 73.3% (217 out of 296). Logistic regression analysis showed a significant association between C.T.-IgG-Ab positive and HIV prevalence. (Odds Ratio: 5.33; 95% Confidence Interval, 2.82-10.07). This study suggests that the existence of Chlamydia trachomatis is closely related with HIV prevalence among CSWs in Cambodia. Other STDs may also increase susceptibility to male-to-female sexual transmission of HIV. This suggests that appropriate prevention against STDs will be needed for the control of HIV prevalence in Cambodia.

  17. IEEE Std 650-1990: IEEE standard for qualification of Class 1E static battery chargers and inverters for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Methods for qualifying static battery chargers and inverters for Class 1E installations in a mild environment outside containment in nuclear power generating stations are described. The qualification methods set forth employ a combination of type testing and analysis, the latter including a justification of methods, theories, and assumptions used. These procedures meet the requirements of IEEE Std 323-1983, IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations

  18. Nanodisc-Targeted STD NMR Spectroscopy Reveals Atomic Details of Ligand Binding to Lipid Environments.

    Science.gov (United States)

    Muñoz-García, Juan C; Inacio Dos Reis, Rosana; Taylor, Richard J; Henry, Alistair J; Watts, Anthony

    2018-05-18

    Saturation transfer difference (STD) NMR spectroscopy is one of the most popular ligand-based NMR techniques for the study of protein-ligand interactions. This is due to its robustness and the fact that it is focused on the signals of the ligand, without any need for NMR information on the macromolecular target. This technique is most commonly applied to systems involving different types of ligands (e.g., small organic molecules, carbohydrates or lipids) and a protein as the target, in which the latter is selectively saturated. However, only a few examples have been reported where membrane mimetics are the macromolecular binding partners. Here, we have employed STD NMR spectroscopy to investigate the interactions of the neurotransmitter dopamine with mimetics of lipid bilayers, such as nanodiscs, by saturation of the latter. In particular, the interactions between dopamine and model lipid nanodiscs formed either from charged or zwitterionic lipids have been resolved at the atomic level. The results, in agreement with previous isothermal titration calorimetry studies, show that dopamine preferentially binds to negatively charged model membranes, but also provide detailed atomic insights into the mode of interaction of dopamine with membrane mimetics. Our findings provide relevant structural information for the design of lipid-based drug carriers of dopamine and its structural analogues and are of general applicability to other systems. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. 75 FR 39264 - CDC/HRSA Advisory Committee on HIV and STD Prevention and Treatment

    Science.gov (United States)

    2010-07-08

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Health Resources and Services Administration CDC/HRSA Advisory Committee on HIV and STD Prevention and Treatment In... disparities through programs, policy, and research and public health ethics; (2) To provide information to...

  20. National HIV Testing Day

    Centers for Disease Control (CDC) Podcasts

    Dr. Kevin A. Fenton, Director of CDC's National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention, discusses National HIV Testing Day, an annual observance which raises awareness of the importance of knowing one's HIV status and encourages at-risk individuals to get an HIV test.

  1. The proposal of permanent education in the formation of dentists in std/hiv/aids

    Directory of Open Access Journals (Sweden)

    Maria de Fátima Nunes

    2008-01-01

    Full Text Available The objective of this work is to report the experience of the "Project for the formation of dentists as facilitators of Permanent Education in Health in the area of STD/HIV/AIDS" developed in partnerships with the National Program of STD/AIDS, the Technical Area of Oral Health of the Ministry of Health, Public Universities and Municipal and State Secretaries of Health. The objective of the program was to capacitate dentists of the public health system in Brazilian states and cities to provide integral and humanized attendance for people living with HIV/AIDS. The methodology of choice for the form of teams of facilitators was Permanent Education in Health through semi-presential courses focusing on the problematization of local and professional realities. Thus, seeking to construct a process of education to modify and reorient the hegemonic dental practice, strengthening the process of attendance and management and the partnerships, guaranteeing the sustainability of the actions in the states and cities.

  2. Evaluation by fluorescence, STD-NMR, docking and semi-empirical calculations of the o-NBA photo-acid interaction with BSA

    Science.gov (United States)

    Chaves, Otávio A.; Jesus, Catarina S. H.; Cruz, Pedro F.; Sant'Anna, Carlos M. R.; Brito, Rui M. M.; Serpa, Carlos

    2016-12-01

    Serum albumins present reversible pH dependent conformational transitions. A sudden laser induced pH-jump is a methodology that can provide new insights on localized protein (un)folding processes that occur within the nanosecond to microsecond time scale. To generate the fast pH jump needed to fast-trigger a protein conformational event, a photo-triggered acid generator as o-nitrobenzaldehyde (o-NBA) can be conveniently used. In order to detect potential specific or nonspecific interactions between o-NBA and BSA, we have performed ligand-binding studies using fluorescence spectroscopy, saturation transfer difference (STD) NMR, molecular docking and semi-empirical calculations. Fluorescence quenching indicates the formation of a non-fluorescent complex in the ground-state between the fluorophore and the quencher, but o-NBA does not bind much effectively to the protein (Ka 4.34 × 103 M- 1) and thus can be considered a relatively weak binder. The corresponding thermodynamic parameters: ΔG°, ΔS° and ΔH° showed that the binding process is spontaneous and entropy driven. Results of 1H STD-NMR confirm that the photo-acid and BSA interact, and the relative intensities of the signals in the STD spectra show that all o-NBA protons are equally involved in the binding process, which should correspond to a nonspecific interaction. Molecular docking and semi-empirical calculations suggest that the o-NBA binds preferentially to the Trp-212-containing site of BSA (FA7), interacting via hydrogen bonds with Arg-217 and Tyr-149 residues.

  3. The cost of implementing rapid HIV testing in sexually transmitted disease clinics in the United States.

    Science.gov (United States)

    Eggman, Ashley A; Feaster, Daniel J; Leff, Jared A; Golden, Matthew R; Castellon, Pedro C; Gooden, Lauren; Matheson, Tim; Colfax, Grant N; Metsch, Lisa R; Schackman, Bruce R

    2014-09-01

    Rapid HIV testing in high-risk populations can increase the number of persons who learn their HIV status and avoid spending clinic resources to locate persons identified as HIV infected. We determined the cost to sexually transmitted disease (STD) clinics of point-of-care rapid HIV testing using data from 7 public clinics that participated in a randomized trial of rapid testing with and without brief patient-centered risk reduction counseling in 2010. Costs included counselor and trainer time, supplies, and clinic overhead. We applied national labor rates and test costs. We calculated median clinic start-up costs and mean cost per patient tested, and projected incremental annual costs of implementing universal rapid HIV testing compared with current testing practices. Criteria for offering rapid HIV testing and methods for delivering nonrapid test results varied among clinics before the trial. Rapid HIV testing cost an average of US $22/patient without brief risk reduction counseling and US $46/patient with counseling in these 7 clinics. Median start-up costs per clinic were US $1100 and US $16,100 without and with counseling, respectively. Estimated incremental annual costs per clinic of implementing universal rapid HIV testing varied by whether or not brief counseling is conducted and by current clinic testing practices, ranging from a savings of US $19,500 to a cost of US $40,700 without counseling and a cost of US $98,000 to US $153,900 with counseling. Universal rapid HIV testing in STD clinics with same-day results can be implemented at relatively low cost to STD clinics, if brief risk reduction counseling is not offered.

  4. Improved PFB operations: 400-hour turbine test results. [coal combustion products and hot corrosion in gas turbines

    Science.gov (United States)

    Rollbuhler, R. J.; Benford, S. M.; Zellars, G. R.

    1980-01-01

    A pressurized fluidized bed (PFB) coal-burning reactor was used to provide hot effluent gases for operation of a small gas turbine. Preliminary tests determined the optimum operating conditions that would result in minimum bed particle carryover in the combustion gases. Solids were removed from the gases before they could be transported into the test turbine by use of a modified two stage cyclone separator. Design changes and refined operation procedures resulted in a significant decrease in particle carryover, from 2800 to 93 ppm (1.5 to 0.05 grains/std cu ft), with minimal drop in gas temperature and pressure. The achievement of stable burn conditions and low solids loadings made possible a 400 hr test of small superalloy rotor, 15 cm (6 in.) in diameter, operating in the effluent. Blades removed and examined metallographically after 200 hr exhibited accelerated oxidation over most of the blade surface, with subsurface alumina penetration to 20 micron m. After 400 hours, average erosion loss was about 25 micron m (1 mil). Sulfide particles, indicating hot corrosion, were present in depletion zones, and their presence corresponded in general to the areas of adherent solids deposit. Sulfidation appears to be a materials problem equal in importance to erosion.

  5. Influence of Professional Preparation and Class Structure on HIV, STD, and Pregnancy Prevention Education

    Science.gov (United States)

    Rhodes, Darson L.; Jozkowski, Kristen N.; Hammig, Bart J.; Ogletree, Roberta J.; Fogarty, Erin C.

    2014-01-01

    Objective: The purpose of this study was to determine if education about human immunodeficiency virus (HIV)/sexually transmitted disease (STD) and pregnancy prevention is dependent on professional preparation and/or class structure. Design: A secondary data analysis of the 2006 School Health Policies and Programmes Study (SHPPS) was conducted.…

  6. 76 FR 66721 - CDC/HRSA Advisory Committee on HIV and STD Prevention and Treatment

    Science.gov (United States)

    2011-10-27

    ... Advisory Committee on HIV and STD Prevention and Treatment In accordance with section l0(a)(2) of the... the Administrator, HRSA, regarding activities related to prevention and control of HIV/AIDS and other STDs, the support of health care services to persons living with HIV/AIDS, and education of health...

  7. Correlates of abortions and condom use among high risk women attending an std clinic in st Petersburg, Russia

    Directory of Open Access Journals (Sweden)

    Skochilov Roman V

    2011-10-01

    Full Text Available Abstract Background Many women in Russia rely on abortion as a primary birth control method. Although refusal to use contraceptives, including condoms, may undermine public health efforts to decrease HIV sexual risk behaviors, few studies have investigated the risk factors associated with abortion among women at high risk for HIV. This study sought to identify the correlates of abortions and of lack of condom use among high risk STD clinic patients in St Petersburg Russia. Methods Cross-sectional analysis of data collected between 2009 and 2010 from women who had casual or multiple sexual partners in the previous three months was analyzed. Multivariate logistic regression assessed the independent correlates of abortion(s and no condom use in the prior three months. Independent variables included socio-demographics, at risk drinking per alcohol use disorder identification test (AUDIT-C criteria, having sex after drinking alcohol, having a sexual partner who injects illicit drugs, and parity. Results Of 87 participants, 45% had an abortion in their lifetime and 26% did not use condoms in the prior three months. Abortion was independently associated with low income (OR, 3.33, 95%CI, 1.13-9.78 and at risk drinking (OR, 3.52, 95%CI, 1.24-10.05. Lack of condom use was independently associated with being more likely to have sex after drinking (OR, 3.37, 95%CI, 1.10-10.28 and parity (OR, 3.69, 95%CI, 1.25-10.89. Conclusions Programs to increase contraceptive use including condom use among women at high risk for STD/HIV in Russia are needed. Programs to reduce sexual HIV risk and abortion rates must address alcohol misuse and target women with limited income.

  8. 77 FR 23733 - CDC/HRSA Advisory Committee on HIV and STD Prevention and Treatment

    Science.gov (United States)

    2012-04-20

    ... Resources and Services Administration CDC/HRSA Advisory Committee on HIV and STD Prevention and Treatment In... and control of HIV/AIDS and other STDs, the support of health care services to persons living with HIV/AIDS, and education of health professionals and the public about HIV/AIDS and other STDs. Matters To Be...

  9. A comparison of four sampling methods among men having sex with men in China: implications for HIV/STD surveillance and prevention

    Science.gov (United States)

    Guo, Yan; Li, Xiaoming; Fang, Xiaoyi; Lin, Xiuyun; Song, Yan; Jiang, Shuling; Stanton, Bonita

    2011-01-01

    Sample representativeness remains one of the challenges in effective HIV/STD surveillance and prevention targeting MSM worldwide. Although convenience samples are widely used in studies of MSM, previous studies suggested that these samples might not be representative of the broader MSM population. This issue becomes even more critical in many developing countries where needed resources for conducting probability sampling are limited. We examined variations in HIV and Syphilis infections and sociodemographic and behavioral factors among 307 young migrant MSM recruited using four different convenience sampling methods (peer outreach, informal social network, Internet, and venue-based) in Beijing, China in 2009. The participants completed a self-administered survey and provided blood specimens for HIV/STD testing. Among the four MSM samples using different recruitment methods, rates of HIV infections were 5.1%, 5.8%, 7.8%, and 3.4%; rates of Syphilis infection were 21.8%, 36.2%, 11.8%, and 13.8%; rates of inconsistent condom use were 57%, 52%, 58%, and 38%. Significant differences were found in various sociodemographic characteristics (e.g., age, migration history, education, income, places of employment) and risk behaviors (e.g., age at first sex, number of sex partners, involvement in commercial sex, and substance use) among samples recruited by different sampling methods. The results confirmed the challenges of obtaining representative MSM samples and underscored the importance of using multiple sampling methods to reach MSM from diverse backgrounds and in different social segments and to improve the representativeness of the MSM samples when the use of probability sampling approach is not feasible. PMID:21711162

  10. Masculinity, vulnerability and prevention of STD/HIV/AIDS among male adolescents: social representations in a land reform settlement.

    Science.gov (United States)

    Arraes, Camila de Oliveira; Palos, Marinésia Aparecida Prado; Barbosa, Maria Alves; Teles, Sheila Araujo; Souza, Márcia Maria de; Matos, Marcos André de

    2013-01-01

    to analyze the relationship of masculinity, vulnerability and prevention of STD / HIV / AIDS among adolescent males of a land reform settlement in central Brazil. a qualitative study using as precepts the strands of social representations with teenagers between 12 to 24 years. three categories emerged - Perception of vulnerability; Gender and vulnerability; and, Prevention and vulnerability to STD / HIV / AIDS. Adolescents felt invulnerable to sexually transmitted diseases anchored in the social representations in favor of the male hegemony. An ignorance about forms of prevention for STD / HIV / AIDS was demonstrated in their statements. It is believed that institutional projects such as the School Health Program and the Men's Health Care Program constitute essential tools to minimize factors of vulnerability in this population, since the school is recognized as a social facility that promotes socialization of experiences and contributes to the construction of the identity of the adolescent. the social representations of masculinity collaborate for the vulnerable behavior of the adolescents for the acquisition of sexually transmitted diseases. One hopes that this study can contribute to the production of knowledge and technical-scientific improvement of the professionals, especially the nurse, in order to discuss issues related to male sexuality of adolescents in the situation of the land reform settlement.

  11. Prevalence of Chlamydia trachomatis infection among patients attending infertility and sexually transmitted diseases clinic (STD) in Kano, North Western Nigeria.

    Science.gov (United States)

    Nwankwo, E O; Sadiq, Magaji N

    2014-09-01

    Chlamydia trachomatis is the most common bacterial sexually transmitted disease in the world with severe complications. The aim of this study was to determine the prevalence and possible risk factors of C. trachomatis in Kano. There is dearth of information on this subject in this locality. Urine samples, Endocervical swabs and Urethral swab were collected from consecutive patients attending the Infertility and STD clinics in Aminu Kano Teaching Hospital (AKTH) between June and December 2012, after administering a questionnaire by the attending physician and also obtaining an informed consent.Samples were analyzed using Diaspot Chlamydia kit, a rapid immunoassay test for the detection of genital chlamydial antigen in urinogenital samples. A total of 125 consecutive samples were collected, comprising 69 females and 56 males aged between 14 - 55 years. Twelve samples tested positive for C. trachomatis antigen giving a prevalence rate of 9.6%. The age group prevalence were as follows 25 - 29 yrs (17.1%), 20 - 24 (16.7%), 15 - 19 (12.5%), 30 - 34 (11.1%) and > 49 years (9.0%). Married patients were associated with higher infection rate than single (8.3%), and divorced patients (33.3%). A higher percentage of the patients (95.2%) were not aware of the existence of C. trachomatis infection and its complications. Previous STD exposure was associated with increased risk of Chlamydia infection. C. trachomatis infection if unchecked will continue to pose a threat to reproductive life with its established complications. Since asymptomatic cases are common in the population regular screening should be encouraged for every adult especially before commencement of marital life.

  12. Tuberculosis Facts - Testing for TB

    Science.gov (United States)

    Tuberculosis (TB) Facts Testing for TB What is TB? “TB” is short for a disease called tuberculosis. TB is spread through the air from one ... Viral Hepatitis, STD, and TB Prevention Division of Tuberculosis Elimination

  13. Estimation of the Thickness and the Material Combination of the Thermal Stress Control Layer (TSCL) for the Stellite21 Hardfaced STD61 Hot Working Tool Steel Using Three-Dimensional Finite Element Analysis

    International Nuclear Information System (INIS)

    Park, Na-Ra; Ahn, Dong-Gyu; Oh, Jin-Woo

    2014-01-01

    The research on a thermal stress control layer (TSCL) begins to undertake to reduce residual stress and strain in the vicinity of the joined region between the hardfacing layer and the base part. The goal of this paper is to estimate the material combination and the thickness of TSCL for the Stellite21 hardfaced STD61 hot working tool steel via three-dimensional finite element analysis (FEA). TSCL is created by the combination of Stellite21 and STD61. The thickness of TSCL ranges from 0.5 mm to 1.5 mm. The influence of the material combination and the thickness of TSCL on temperature, thermal stress and thermal strain distributions of the hardfaced part have been investigated. The results of the investigation have been revealed that a proper material combination of TSCL is Stellite21 of 50 % and STD61 of 50 %, and its appropriate thickness is 1.0 mm

  14. Liquid Rocket Engine Testing

    Science.gov (United States)

    2016-10-21

    Briefing Charts 3. DATES COVERED (From - To) 17 October 2016 – 26 October 2016 4. TITLE AND SUBTITLE Liquid Rocket Engine Testing 5a. CONTRACT NUMBER...298 (Rev. 8-98) Prescribed by ANSI Std. 239.18 Liquid Rocket Engine Testing SFTE Symposium 21 October 2016 Jake Robertson, Capt USAF AFRL...Distribution Unlimited. PA Clearance 16493 Liquid Rocket Engine Testing • Engines and their components are extensively static-tested in development • This

  15. HIV/STD risk behaviors and perceptions among rural-to-urban migrants in China.

    Science.gov (United States)

    Li, Xiaoming; Fang, Xiaoyi; Lin, Danhua; Mao, Rong; Wang, Jing; Cottrell, Lesley; Harris, Carole; Stanton, Bonita

    2004-12-01

    Data from 2,153 sexually active rural-to-urban migrants in China were analyzed to examine the relationship between the movement of rural-to-urban migration and increased HIV/STD (sexually transmitted disease) risk and the applicability of constructs of a Western-based theory of behavioral change to the study population. Measurements included migrant mobility, sexual risk, and the seven constructs of the protection motivation theory (PMT). Data in the current study suggest that high mobility among rural-to-urban migrants was associated with increased sexual risk. The PMT constructs are applicable in identifying perceptions and attitudes associated with sexual risk behaviors in this culturally distinct population. Increased sexual risk was associated with increased perceptions of extrinsic rewards, intrinsic rewards, and response cost. Also consistent with PMT, increased sexual risk was associated with perceptions of decreased severity, vulnerability, response efficacy, and self-efficacy. After controlling for a number of key confounding factors, all seven PMT constructs were associated with sexual risk in the manner posited by the theory. The association between mobility and sexual risk underscores the importance of effective HIV/STD prevention efforts among this vulnerable population. The social cognitive theories including the PMT may form a logical base for prevention intervention programs targeting rural-to-urban migrants in China.

  16. Get Tested. Make it Contagious.

    Centers for Disease Control (CDC) Podcasts

    2010-05-13

    This podcast is part of the "Get Tested. Make it Contagious" campaign, which is designed to raise awareness of sexually transmitted diseases (STDs) and increase testing among college students.  Created: 5/13/2010 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 5/13/2010.

  17. Mantoux Tuberculin Skin Test

    Centers for Disease Control (CDC) Podcasts

    2006-11-22

    Learn how to evaluate people for latent TB infection with the Mantoux tuberculin skin test. This podcast includes sections on administering and reading the Mantoux tuberculin skin test, the standard method for detecting latent TB infection since the 1930s.  Created: 11/22/2006 by National Center for HIV, STD and TB Prevention (NCHHSTP).   Date Released: 12/12/2006.

  18. Intermediate results of a one-year study of a laser spectrometer in the DOE filter test facilities

    International Nuclear Information System (INIS)

    Soderholm, S.C.; Tillery, M.I.

    1984-01-01

    A 1-year study of the model LAS-X (Particle Measuring Systems, Inc.) laser spectrometer in the Department of Energy (DOE) Filter Test Facilities (FTFs) was begun on August 1, 1983. The principal objectives of the study were to gain operational experience with the LAS-X/diluter/HP-85 particle size measurement system in the FTF environment, acquire size distribution data to quantify the consistency of the Q107 aerosol size distribution at each FTF and among FTFs, and compare the FTF test aerosols to current and proposed standards. Results of the first 9 months of the study are summarized and discussed. Major conclusions based on these data are: (1) the LAS-X system can be operated successfully in the FTF environment, (2) each FTF would require a back-up LAS-X to be able to continue filter testing during the (at least) once each year removal of a LAS-X from service for major recalibration and repair, (3) the FTF test aerosols are not monodisperse, as assumed in the military standard MIL-STD-282, and do not all meet the new DOE Nuclear Standard NE-F-3-43, which a replacement aerosol would be required to meet, (4) the test aerosol at each FTF is quite consistent over time, and (5) the test aerosols at the three FTFs differ consistently. Final conclusions and recommendations from this study will be developed after analysis of the full 12 months of data

  19. Current socioclinical trend of sexually transmitted diseases and relevance of STD clinic: A comparative study from referral tertiary care center of Gwalior, India

    Directory of Open Access Journals (Sweden)

    Sandeep Singh

    2014-01-01

    Full Text Available Objective: Sexually transmitted infections (STIs are the major public health concern in both developed and developing countries regulated by the cultural pattern of gender expression in their society. Thus, it demanded a necessary action to review the changing pattern in (Gwalior, central India where health condition is not in a good fashion with poor socioeconomic status and awareness. Materials and Methods: This is a hospital based cross sectional questionnaire study with a sample size of 222 respondents attending sexually transmitted disease (STD clinic at JAH Gwalior from December 2011 to March 2012 using a random sampling method. Results: Most of the cases among females were in the age group of 20-40 years (152, 84.44% and males were in 18-40 years age group (35, 83.33%. Out of 180, 22 (12.22% females were having non-regular sexual partners. Out of 22 females frequency of consistent, non-consistent, and no condom use with non-regular sexual partners was three (13.63%, two (9.09%, and 17 (77.27%, respectively. Out of 42 males, 22 (52.38% reported having sex with non-regular sexual partners. None of the 15 (100% male subjects having friends or relatives as non-regular sexual partner were using condoms. Statistically significant differences were found as compared to a previous study from same STD clinic are discharge, lower abdominal pain, painful micturition, nodules in genitals as 106 (58.88%; P = 0.0001, 59 (32.77%; P = 0.0007, 25 (13.88%; P = 0.001, and one (0.5%; P = 0.005, respectively and in males with absence of abdominal pain and nodules in genitals as P = 0.016 and 0.03, respectively. Preferred place of treatment of STIs was government facility in both male and females with statistically significant 15.76% (P = 0.0001 of the population seeking no treatment. Discussions: Study suggests a changing trend of the STDs owing to the difference in the clinical presentation of the disease to a previous study from the same STD clinic few years

  20. 78 FR 32392 - CDC/HRSA Advisory Committee on HIV, Viral Hepatitis and STD Prevention and Treatment

    Science.gov (United States)

    2013-05-30

    ... Resources and Services Administration CDC/HRSA Advisory Committee on HIV, Viral Hepatitis and STD Prevention.../AIDS, Viral Hepatitis and other STDs, the support of health care services to persons living with HIV/AIDS, and education of health professionals and the public about HIV/AIDS, Viral Hepatitis and other...

  1. Real-life IT architecture design reports and their relation to IEEE Std 1471 stakeholders and concerns

    NARCIS (Netherlands)

    van Vliet, H.; Koning, H.

    2006-01-01

    Architectural designs are an important means to manage the development and deployment of information technology (IT). Much debate has been going on about a proper definition of architecture in IT and about how to describe it. In 2000, the IEEE Std 1471 proposed a model of an architecture description

  2. Introduction to IEEE Std. 7-4.3.2 Annex D -- ''Qualification of existing commercial computers''

    International Nuclear Information System (INIS)

    Holmstrom, K.J.

    1995-01-01

    On September 15th of 1993 the IEEE standards board approved IEEE Std. 7-4.3.2-1993, IEEE Standard for Digital Computers in Safety Systems of Nuclear Power Generating Stations. This paper is an introduction to Annex D of this document which concerns the commercial grade dedication of existing computers or new non-1E computers

  3. Drop Testing Representative Multi-Canister Overpacks

    Energy Technology Data Exchange (ETDEWEB)

    Snow, Spencer D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Morton, Dana K. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-06-01

    The objective of the work reported herein was to determine the ability of the Multi- Canister Overpack (MCO) canister design to maintain its containment boundary after an accidental drop event. Two test MCO canisters were assembled at Hanford, prepared for testing at the Idaho National Engineering and Environmental Laboratory (INEEL), drop tested at Sandia National Laboratories, and evaluated back at the INEEL. In addition to the actual testing efforts, finite element plastic analysis techniques were used to make both pre-test and post-test predictions of the test MCOs structural deformations. The completed effort has demonstrated that the canister design is capable of maintaining a 50 psig pressure boundary after drop testing. Based on helium leak testing methods, one test MCO was determined to have a leakage rate not greater than 1x10-5 std cc/sec (prior internal helium presence prevented a more rigorous test) and the remaining test MCO had a measured leakage rate less than 1x10-7 std cc/sec (i.e., a leaktight containment) after the drop test. The effort has also demonstrated the capability of finite element methods using plastic analysis techniques to accurately predict the structural deformations of canisters subjected to an accidental drop event.

  4. Ligand screening by saturation-transfer difference (STD) NMR spectroscopy.

    Energy Technology Data Exchange (ETDEWEB)

    Krishnan, V V

    2005-04-26

    NMR based methods to screen for high-affinity ligands have become an indispensable tool for designing rationalized drugs, as these offer a combination of good experimental design of the screening process and data interpretation methods, which together provide unprecedented information on the complex nature of protein-ligand interactions. These methods rely on measuring direct changes in the spectral parameters, that are often simpler than the complex experimental procedures used to study structure and dynamics of proteins. The goal of this review article is to provide the basic details of NMR based ligand-screening methods, with particular focus on the saturation transfer difference (STD) experiment. In addition, we provide an overview of other NMR experimental methods and a practical guide on how to go about designing and implementing them.

  5. Successful Integration of Hepatitis C Virus Point-of-Care Tests into the Denver Metro Health Clinic

    Directory of Open Access Journals (Sweden)

    A. Jewett

    2013-01-01

    Full Text Available Background. The Centers for Disease Control and Prevention (CDC recommends testing and linkage to care for persons most likely infected with hepatitis C virus (HCV, including persons with human immunodeficiency virus. We explored facilitators and barriers to integrating HCV point-of-care (POC testing into standard operations at an urban STD clinic. Methods. The OraQuick HCV rapid antibody test was integrated at the Denver Metro Health Clinic (DMHC. All clients with at least one risk factor were offered the POC test. Research staff conducted interviews with clients (three HCV positive and nine HCV negative. Focus groups were conducted with triage staff, providers, and linkage-to-care counselors. Results. Clients were pleased with the ease of use and rapid return of results from the HCV POC test. Integrating the test into this setting required more time but was not overly burdensome. While counseling messages were clear to staff, clients retained little knowledge of hepatitis C infection or factors related to risk. Barriers to integrating the HCV POC test into clinic operations were loss to follow-up and access to care. Conclusion. DMHC successfully integrated HCV POC testing and piloted a HCV linkage-to-care program. Providing testing opportunities at STD clinics could increase identification of persons with HCV infection.

  6. Target immobilization as a strategy for NMR-based fragment screening: comparison of TINS, STD, and SPR for fragment hit identification.

    Science.gov (United States)

    Kobayashi, Masakazu; Retra, Kim; Figaroa, Francis; Hollander, Johan G; Ab, Eiso; Heetebrij, Robert J; Irth, Hubertus; Siegal, Gregg

    2010-09-01

    Fragment-based drug discovery (FBDD) has become a widely accepted tool that is complementary to high-throughput screening (HTS) in developing small-molecule inhibitors of pharmaceutical targets. Because a fragment campaign can only be as successful as the hit matter found, it is critical that the first stage of the process be optimized. Here the authors compare the 3 most commonly used methods for hit discovery in FBDD: high concentration screening (HCS), solution ligand-observed nuclear magnetic resonance (NMR), and surface plasmon resonance (SPR). They selected the commonly used saturation transfer difference (STD) NMR spectroscopy and the proprietary target immobilized NMR screening (TINS) as representative of the array of possible NMR methods. Using a target typical of FBDD campaigns, the authors find that HCS and TINS are the most sensitive to weak interactions. They also find a good correlation between TINS and STD for tighter binding ligands, but the ability of STD to detect ligands with affinity weaker than 1 mM K(D) is limited. Similarly, they find that SPR detection is most suited to ligands that bind with K(D) better than 1 mM. However, the good correlation between SPR and potency in a bioassay makes this a good method for hit validation and characterization studies.

  7. Club Drugs and HIV/STD Infection: An Exploratory Analysis among Men Who Have Sex with Men in Changsha, China.

    Directory of Open Access Journals (Sweden)

    Xi Chen

    Full Text Available To evaluate current club drug use and its potential association with the transmission of HIV/STD among Changsha men who have sex with men (MSM.A cross-sectional survey was conducted by using self-administered questionnaires including information regarding socio-demographics, club drug use, high-risk behaviors, and HIV/STD infections. Multiple methods including venue-based, peer referral using "snowball" techniques, and internet advertisements were used to recruit study participants.Of the 826 participants, 177 (21.4% reported that they had used club drugs at some time before or during sex in the past six months. MSM with young age, low education level, and seeking partners through the internet or bars were the main population who used drugs. Poppers were the most common drug used among Changsha MSM. The prevalence of HIV, syphilis, and herpes simplex virus-2 were higher among drug users. There were no significant differences in unprotected sexual intercourse and condom use between drug users and non-users. Compared with non-users, risk behaviors such as group sex, multiple sex partners, and sex with foreigners were more frequent among drug users.Club drug use is common among Changsha MSM, and is related to unsafe sex activities and HIV/STD infection. It is necessary to build novel targeted HIV prevention strategies to monitor and reduce club drug use among MSM.

  8. Online learning: An alternative for STD/HIV/AIDS knowledge update.

    Science.gov (United States)

    Caballero, M Erika; San Martín, V Ana María; Reyes, A Cecilia

    2006-01-01

    The experience of the e-learning diploma "Specialist in management for control and prevention of STD/HIV/AIDS" for Latin-American health professionals is presented. It was developed by eminent advisory Chilean experts using a web CT platform with the support of the, Global Development Learning Network (GDLN) of World Bank and certificated by the Austral University of Chile, Virtual University and REUNA. The design, development, results of learning, and the opinion of the quality of the course are described. The purpose of this research was to know the opinion of the participants about the quality of diploma on line, and to orient the decision making with respect to the optimization for future versions of this diploma. The universe and sample correspond to first cohort of the diploma during year 2005, was conformed by 33 students. The instrument of data collection used was a survey of opinion applied when finalizing of the diploma. The data were process in SPSS 13.0. The measured criteria of quality were classified like high quality when 80% or more of the participants answered that the evaluated aspect was excellent, medium quality (61 and 79%) and low quality at least of 60% thought that was excellent. The results emphasize that the quality of the contents of the diploma it considers a 95% of the participants excellent. A 100% consider the roll carried out by the tutor excellent and 91.3% excellent the roll of the academic secretary. The means of support to the student were evaluated like excellent by 58.3% of the users. The system of communication by means of internal mail of the diploma was considered excellent by 67% of the students the forums were evaluated like excellent by 84.8% of the people. In relation to the Web site 84.5% consider it excellent, the learning activities were considered as excellent by 75% and the system of evaluation of the diploma was considered adapted by 83.3% of the participants. The 100% would recommend the diploma to other

  9. Short-Term Impact of Safer Choices: A Multicomponent, School-Based HIV, Other STD, and Pregnancy Prevention Program.

    Science.gov (United States)

    Coyle, Karin; Basen-Engquist, Karen; Kirby, Douglas; Parcel, Guy; Banspach, Stephen; Harrist, Ronald; Baumler, Elizabeth; Weil, Marsha

    1999-01-01

    Evaluated the effectiveness of the first year of "Safer Choices," a two-year, multicomponent HIV, STD, and pregnancy-prevention program for high school students based on social theory. Student self-report surveys indicated that "Safer Choices" succeeded in reducing selected risk behaviors and in enhancing selected protective…

  10. Adapting the Get Yourself Tested Campaign to Reach Black and Latino Sexual-Minority Youth.

    Science.gov (United States)

    Garbers, Samantha; Friedman, Allison; Martinez, Omar; Scheinmann, Roberta; Bermudez, Dayana; Silva, Manel; Silverman, Jen; Chiasson, Mary Ann

    2016-09-01

    Culturally appropriate efforts are needed to increase sexually transmitted disease (STD) testing and care among Black and Latino sexual-minority youth, who are at high risk for STDs. Get Yourself Tested, a national testing campaign, has demonstrated success among youth, but it has yet to be assessed for relevance or impact among this population. This effort included (1) formative and materials-testing research through focus groups; (2) adaptation of existing Get Yourself Tested campaign materials to be more inclusive of Black and Latino sexual-minority youth; (3) a 3-month campaign in four venues of New York City, promoting STD testing at events and through mobile testing and online and social media platforms; (4) process evaluation of outreach activities; and (5) an outcome evaluation of testing at select campaign venues, using a preexperimental design. During the 3-month campaign period, the number of STD tests conducted at select campaign venues increased from a comparable 3-month baseline period. Although testing uptake through mobile vans remained low in absolute numbers, the van drew a high-prevalence sample, with positivity rates of 26.9% for chlamydia and 11.5% for gonorrhea. This article documents the process and lessons learned from adapting and implementing a local campaign for Black and Latino sexual-minority youth. © 2016 Society for Public Health Education.

  11. Results of Cable Aging Management Tests for Laguna Verde Nuclear Power Plant

    International Nuclear Information System (INIS)

    Garcia Hernandez, E.E.; Vazquez Cervantes, R.M.; Bonifacio M, J.; Garcia Garcia, J.

    2012-01-01

    Laguna Verde Nuclear Power Plant (LVNPP) located in Veracruz, Mexico is a BWR plant, two Units with 810 MWe each one, Unit 1 (1989) and Unit 2 (1990). The Equipment Qualification (EQ) Group at the Nuclear Research National Institute (ININ) has been working with the plant on tasks to develop the LVNPP cables Aging Management Program (AMP), as part of the technical basis to extend the operational life of the plant through license renewal up to 60 years. LVNPP cables are qualified for 40 years plus a LOCA DBA in accordance with 10.CFR 50.49 and the IEEE Std-323 and IEEE St. 383. The first studies for cables AMP have been performed with samples of safety related I and C cables taken from the LVNPP warehouse, similar brands and models as installed at the plant. ININ applied the condition monitoring techniques to these samples to identify predictive degradation and to establish the methodology for cables AMP, focused to the LVNPP license renewal. Cable tests program has been running at the EQ Lab in ININ, performing accelerated aging by steps up to 60 years and to 40 years plus a LOCA test. Determination for Activation Energy (Ea) and Oxidation Induction Time (OIT) methods were developed applying a DSC/TGA calorimeter. (author)

  12. 78 FR 64221 - CDC/HRSA Advisory Committee on HIV, Viral Hepatitis and STD Prevention and Treatment; Notice of...

    Science.gov (United States)

    2013-10-28

    ... Advisory Committee on HIV, Viral Hepatitis and STD Prevention and Treatment; Notice of Meeting In... Administrator, HRSA, regarding activities related to prevention and control of HIV/AIDS, Viral Hepatitis and... professionals and the public about HIV/AIDS, Viral Hepatitis, and other STDs. Agenda: Agenda items include: (1...

  13. Public opinion about condoms for HIV and STD prevention: a Midwestern state telephone survey.

    Science.gov (United States)

    Yarber, William L; Milhausen, Robin R; Crosby, Richard A; Torabi, Mohammad R

    2005-09-01

    Public opinion is important in determining condom and condom education policies in public high schools. A random telephone survey of 517 Indiana residents was conducted from July through October 2003 to assess public opinion about education on correct condom use for HIV and STD prevention; condom availability in Indiana public high schools; and issues related to condom use, effectiveness and promotion. Data were analyzed using bivariate and linear regression techniques. A majority of respondents strongly or somewhat agreed that instruction on correct condom use for HIV and STD prevention should be provided in public high schools (77%), classroom instruction should include condoms (71%), only medically accurate information about condoms should being given (94%) and the federal government should promote condoms (70%). Fewer than half (48%) strongly or somewhat agreed that condoms should be made available to teenagers in public high schools without parental permission. Nearly all (92%) considered condoms at least somewhat effective in preventing HIV and other STDs. Non-Republican party affiliation, younger age and condom use within the previous five years were each significantly associated with having positive opinions on many of the condom-related statements. Public opinion appears to support the provision of correct condom use information in Indiana public schools. Schools should consider providing only medically accurate information about condoms and including condoms in instruction so students can see and touch them.

  14. Sexual Sensation Seeking, Social Stress, and Coping Styles as Predictors of HIV/STD Risk Behaviors in Adolescents

    Science.gov (United States)

    Teva, Inmaculada; Bermudez, Maria Paz; Buela-Casal, Gualberto

    2010-01-01

    The aim of this study was to assess whether coping styles, social stress, and sexual sensation seeking were predictors of HIV/STD risk behaviours in adolescents. A representative sample of 4,456 female and male Spanish high school students aged 13 to 18 years participated. A stratified random sampling procedure was used. Self-report questionnaires…

  15. Interaction between Wine Phenolic Acids and Salivary Proteins by Saturation-Transfer Difference Nuclear Magnetic Resonance Spectroscopy (STD-NMR) and Molecular Dynamics Simulations.

    Science.gov (United States)

    Ferrer-Gallego, Raúl; Hernández-Hierro, José Miguel; Brás, Natércia F; Vale, Nuno; Gomes, Paula; Mateus, Nuno; de Freitas, Victor; Heredia, Francisco J; Escribano-Bailón, María Teresa

    2017-08-09

    The interaction between phenolic compounds and salivary proteins is highly related to the astringency perception. Recently, it has been proven the existence of synergisms on the perceived astringency when phenolic acids were tested as mixtures in comparison to individual compounds, maintaining constant the total amount of the stimulus. The interactions between wine phenolic acids and the peptide fragment IB7 12 have been studied by saturation-transfer difference (STD) NMR spectroscopy. This technique provided the dissociation constants and the percentage of interaction between both individual and mixtures of hydroxybenzoic and hydroxycinnamic acids and the model peptide. It is noteworthy that hydroxybenzoic acids showed higher affinity for the peptide than hydroxycinnamic acids. To obtain further insights into the mechanisms of interaction, molecular dynamics simulations have been performed. Results obtained not only showed the ability of these compounds to interact with salivary proteins but also may justify the synergistic effect observed in previous sensory studies.

  16. MCO combustible gas management leak test acceptance criteria; TOPICAL

    International Nuclear Information System (INIS)

    SHERRELL, D.L.

    1999-01-01

    Existing leak test acceptance criteria for mechanically sealed and weld sealed multi-canister overpacks (MCO) were evaluated to ensure that MCOs can be handled and stored in stagnant air without compromising the Spent Nuclear Fuel Project's overall strategy to prevent accumulation of combustible gas mixtures within MCO's or within their surroundings. The document concludes that the integrated leak test acceptance criteria for mechanically sealed and weld sealed MCOs (1 x 10(sup -5) std cc/sec and 1 x 10(sup -7) std cc/sec, respectively) are adequate to meet all current and foreseeable needs of the project, including capability to demonstrate compliance with the NFPA 60 Paragraph 3-3 requirement to maintain hydrogen concentrations[within the air atmosphere CSB tubes] t or below 1 vol% (i.e., at or below 25% of the LFL)

  17. Higher prevalence of sexual transmitted diseases and correlates of genital warts among heterosexual males attending sexually transmitted infection clinics (MSCs) in Jiangmen, China: implication for the up-taking of STD related service.

    Science.gov (United States)

    Huang, Shujie; Tang, Weiming; Zhu, Zhengjun; Lu, Hekun; Tan, Xueling; Zhang, Baoyuan; Best, John; Yang, Ligang; Zheng, Heping; Jiang, Ning; Yin, Yueping; Yang, Bin; Chen, Xiangsheng

    2015-01-01

    Increasing burden of STDs is one of China's major public health concerns. However, only a limited number of studies have ever investigated the prevalence of these STDs, particular for genital warts and its correlates among heterosexual males attending STD clinics in China. In order to fill this gap, we conducted a cross-sectional study among MSCs in Jiangmen, China, between the years of 2009 and 2010. The eligible participants were recruited from several STD-clinics in public hospitals. We collected demographic information and behaviors of the participants. After HIV and syphilis testing, we further checked whether the participants had genital warts and genital herpes. In addition, urine samples were collected from part of the participants for CT and NG testing. Of the 533 eligible participants, over three-fifths were aged 35 or below, nearly three quarters had no college degree, over three-fifths were residence of Jiangmen. The prevalence of HIV, syphilis, genital warts, genital herpes, CT and NG were 0.19%, 7.50%, 7.32%, 5.25%, 9.73% and 6.19%, respectively. Living with family members (versus living alone), no STD-related service in past year, experiencing STDs related symptoms in past year, and sex with FSWs in last three months were positively associated with genital warts, with adjusted ORs of 5.54 (95% CI 1.94-15.81), 2.26 (95% CI 1.08-4.74), 1.99 (95% CI 1.00-3.99) and 2.01 (95% CI 1.00-4.04), respectively. Our study indicates that the prevalence of STDs among MSCs in Jiangmen was high, which may further spread HIV among MSCs. Targeted interventions that focused on STDs related services uptake should be implemented urgently.

  18. Higher prevalence of sexual transmitted diseases and correlates of genital warts among heterosexual males attending sexually transmitted infection clinics (MSCs in Jiangmen, China: implication for the up-taking of STD related service.

    Directory of Open Access Journals (Sweden)

    Shujie Huang

    Full Text Available Increasing burden of STDs is one of China's major public health concerns. However, only a limited number of studies have ever investigated the prevalence of these STDs, particular for genital warts and its correlates among heterosexual males attending STD clinics in China. In order to fill this gap, we conducted a cross-sectional study among MSCs in Jiangmen, China, between the years of 2009 and 2010.The eligible participants were recruited from several STD-clinics in public hospitals. We collected demographic information and behaviors of the participants. After HIV and syphilis testing, we further checked whether the participants had genital warts and genital herpes. In addition, urine samples were collected from part of the participants for CT and NG testing.Of the 533 eligible participants, over three-fifths were aged 35 or below, nearly three quarters had no college degree, over three-fifths were residence of Jiangmen. The prevalence of HIV, syphilis, genital warts, genital herpes, CT and NG were 0.19%, 7.50%, 7.32%, 5.25%, 9.73% and 6.19%, respectively. Living with family members (versus living alone, no STD-related service in past year, experiencing STDs related symptoms in past year, and sex with FSWs in last three months were positively associated with genital warts, with adjusted ORs of 5.54 (95% CI 1.94-15.81, 2.26 (95% CI 1.08-4.74, 1.99 (95% CI 1.00-3.99 and 2.01 (95% CI 1.00-4.04, respectively.Our study indicates that the prevalence of STDs among MSCs in Jiangmen was high, which may further spread HIV among MSCs. Targeted interventions that focused on STDs related services uptake should be implemented urgently.

  19. Solution of the CSEWG - STD-9 shielding standard problem using the coupled systems NJOY/AMPX-II and the JENDL-3 library

    International Nuclear Information System (INIS)

    Mendoncca, A.G.; Santos, A dos

    1993-01-01

    The CSEWG STD-9 benchmark has been analyzed to evaluate the shielding and out-of-core methodologies using the coupled systems NJOY/AMPX-II and the JENDL-3 library as well as the DOT 3.5 for the transport calculations. Good agreement between calculated and experimental values for the spatial and energetic neutron flux distributions have been found. However, the results for the reaction rates of the activation foils were discrepant even though for same cases they come into a good agreement. (author)

  20. Factors predicting the acceptance of herpes simplex virus type 2 antibody testing among adolescents and young adults.

    Science.gov (United States)

    Zimet, Gregory D; Rosenthal, Susan L; Fortenberry, J Dennis; Brady, Rebecca C; Tu, Wanzhu; Wu, Jingwei; Bernstein, David I; Stanberry, Lawrence R; Stone, Katherine M; Leichliter, Jami S; Fife, Kenneth H

    2004-11-01

    The rates and determinants of acceptance of herpes simplex virus type 2 (HSV-2) testing have not been adequately studied. The objective of this study was to identify factors associated with acceptance of HSV-2 antibody testing in individuals with no history of genital herpes. We conducted a cross-sectional survey study followed by the offer of free HSV-2 serologic testing at an urban sexually transmitted disease (STD) clinic, 2 general adult medical clinics, an urban university campus, and an urban adolescent medicine clinic. A total of 1199 individuals aged 14 to 30 years completed the survey and were offered testing. A total of 68.4% accepted HSV-2 testing. Factors independently associated with acceptance were female sex, older age, having an STD history, having 1 or more sexual partners in the last 6 months, perceived vulnerability to HSV-2 infection, and perceived benefits of HSV-2 testing. Fear of needles predicted rejection of testing, as did attending a general medical clinic versus an STD clinic and nonwhite race. There is a substantial interest in HSV-2 antibody testing across a variety of settings. Those at greatest behavioral and historic risk for HSV-2 infection, women, and persons whose health beliefs are consistent with testing are more likely to accept serologic testing when it is offered.

  1. Over Batch Analysis for the LLNL DOE-STD-3013 Packaging System

    International Nuclear Information System (INIS)

    Riley, D.C.; Dodson, K.

    2009-01-01

    This document addresses the concern raised in the Savannah River Site (SRS) Acceptance Criteria about receiving an item that is over batched by 1.0 kg of fissile materials. This document shows that the occurrence of this is incredible. Some of the Department of Energy Standard 3013 (DOE-STD-3013) requirements are described in Section 2.1. The SRS requirement is discussed in Section 2.2. Section 2.3 describes the way fissile materials are handled in the Lawrence Livermore National Laboratory (LLNL) Plutonium Facility (B332). Based on the material handling discussed in Section 2.3, there are only three errors that could result in a shipping container being over batched. These are: incorrect measurement of the item, selecting the wrong item to package, and packaging two items into a single shipping container. The analysis in Section 3 shows that the first two events are incredible because of the controls that exist at LLNL. The third event is physically impossible. Therefore, it is incredible for an item to be shipped to SRS that is more than 1.0 kg of fissile materials over batched.

  2. DOE standard: Quality assurance inspection and testing of HEPA filters

    International Nuclear Information System (INIS)

    1999-02-01

    This standard establishes essential elements for the quality assurance inspection and testing of HEPA filters by US Department of Energy (DOE)-accepted Filter Test Facilities (FTF). The standard specifies HEPA filter quality assurance inspection and testing practices established in DOE-STD-3022-98, DOE HEPA Filter Test Program, and provides a basis for the preparation of written operating procedures for primary FTF functions

  3. Software test plan/description/report (STP/STD/STR) for the enhanced logistics intratheater support tool (ELIST) global data segment. Version 8.1.0.0, Database Instance Segment Version 8.1.0.0, ...[elided] and Reference Data Segment Version 8.1.0.0 for Solaris 7; TOPICAL

    International Nuclear Information System (INIS)

    Dritz, K.; Absil-Mills, M.; Jacobs, K.

    2002-01-01

    This document is the Software Test Plan/Description/Report (STP/STD/STR) for the DII COE Enhanced Logistics Intratheater Support Tool (ELIST) mission application. It combines in one document the information normally presented separately in a Software Test Plan, a Software Test Description, and a Software Test Report; it also presents this information in one place for all the segments of the ELIST mission application. The primary purpose of this document is to show that ELIST has been tested by the developer and found, by that testing, to install, deinstall, and work properly. The information presented here is detailed enough to allow the reader to repeat the testing independently. The remainder of this document is organized as follows. Section 1.1 identifies the ELIST mission application. Section 2 is the list of all documents referenced in this document. Section 3, the Software Test Plan, outlines the testing methodology and scope-the latter by way of a concise summary of the tests performed. Section 4 presents detailed descriptions of the tests, along with the expected and observed results; that section therefore combines the information normally found in a Software Test Description and a Software Test Report. The remaining small sections present supplementary information. Throughout this document, the phrase ELIST IP refers to the Installation Procedures (IP) for the Enhanced Logistics Intratheater Support Tool (ELIST) Global Data Segment, Database Instance Segment, Database Fill Segment, Database Segment, Database Utility Segment, Software Segment, and Reference Data Segment

  4. Salt Spray Test to Determine Galvanic Corrosion Levels of Electroless Nickel Connectors Mounted on an Aluminum Bracket

    Science.gov (United States)

    Rolin, T. D.; Hodge, R. E.; Torres, P. D.; Jones, D. D.; Laird, K. R.

    2014-01-01

    During preliminary vehicle design reviews, requests were made to change flight termination systems from an electroless nickel (EN) connector coating to a zinc-nickel (ZN) plating. The reason for these changes was due to a new NASA-STD-6012 corrosion requirement where connectors must meet the performance requirement of 168 hr of exposure to salt spray. The specification for class F connectors, MIL-DTL-38999, certifies the EN coating will meet a 48-hr salt spray test, whereas the ZN is certified to meet a 168-hr salt spray test. The ZN finish is a concern because Marshall Space Flight Center has no flight experience with ZN-finished connectors, and MSFC-STD-3012 indicates that zinc and zinc alloys should not be used. The purpose of this test was to run a 168-hr salt spray test to verify the electrical and mechanical integrity of the EN connectors and officially document the results. The salt spray test was conducted per ASTM B117 on several MIL-DTL-38999 flight-like connectors mounted to an aluminum 6061-T6 bracket that was alodined. The configuration, mounting techniques, electrical checks, and materials used were typical of flight and ground support equipment.

  5. Quality control of antibiotics before the implementation of an STD program in Northern Myanmar.

    Science.gov (United States)

    Prazuck, Thierry; Falconi, Isabelle; Morineau, Guy; Bricard-Pacaud, Véronique; Lecomte, Antoine; Ballereau, Francoise

    2002-11-01

    The ready availability of poor-quality drugs in developing countries leads to treatment failure and, consequently, excess mortality and morbidity. Moreover, the widespread availability of substandard drugs plays a key role in increasing the resistance to antimicrobial drugs.GOAL As a prerequisite to the establishment of a sexually transmitted disease (STD) control program, this study aimed to evaluate the quality of antibiotics recommended for treatment of STDs that were locally available in the capital of a province of Northern Myanmar. In addition to the hospital pharmacy, we selected at random 5 of the 41 drug sellers and 5 of the 40 general practitioners who sell antibiotics in the city of Myitkyina. Twenty-one marketing products corresponding to nine different antibiotics used for STD treatment were purchased (benzathine benzylpenicillin, benzylpenicillin, ceftriaxone, chlortetracycline, ciprofloxacin, clotrimazole, co-trimoxazole, doxycycline, and erythromycin). Drugs were sent to France, where they were analyzed according to the WHO guidelines. Drugs were considered to be standard if their dosage remained in the 10% range of the expected value. Among the 21 different specialty products, only three displayed the official "registered" label. Three drugs were expired and the expiration date was not available for six others. One product did not contain the active drug declared (chlortetracycline; Lombisin, Unicorn, China) and did not show any in vitro activity against bacteria. Seven of 21 products (33%) did not contain the stated dosage (1, more than stated dosage; 6, less than stated dosage). The highest deficit observed was 48% in two products (co-trimoxazole, Yong Fong, Myanmar; benzylpenicillin, China [city and manufacturer unknown]). The dosage was not available for five drugs. As a result, only 8 of 21 products (38%) did not contain the stated dosage of active drug. These findings suggest that public health policies based on national treatment guidelines

  6. Take Charge. Take the Test. PSA (:30)

    Centers for Disease Control (CDC) Podcasts

    2012-03-07

    As part of the Take Charge. Take the Test. campaign, this 30 second PSA encourages African American women to get tested for HIV. Locations for a free HIV test can be found by visiting hivtest.org/takecharge or calling 1-800-CDC-INFO (1-800-232-4636).  Created: 3/7/2012 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 3/7/2012.

  7. Exposure to Different Types of Violence and Subsequent Sexual Risk Behavior among Female STD Clinic Patients: A Latent Class Analysis

    Science.gov (United States)

    Walsh, Jennifer L.; Senn, Theresa E.; Carey, Michael P.

    2013-01-01

    Objective Diverse forms of violence, including childhood maltreatment (CM), intimate partner violence (IPV), and exposure to community violence (ECV), have been linked separately with sexual risk behaviors. However, few studies have explored multiple experiences of violence simultaneously in relation to sexual risk-taking, especially in women who are most vulnerable to violent experiences. Methods Participants were 481 women (66% African American, Mage = 27 years) attending a publicly-funded STD clinic who reported on their past and current experiences with violence and their current sexual risk behavior. We identified patterns of experience with violence using latent class analysis (LCA) and investigated which combinations of experiences were associated with the riskiest sexual outcomes. Results Four classes of women with different experiences of violence were identified: Low Violence (39%), Predominantly ECV (20%), Predominantly CM (23%), and Multiply Victimized (18%). Women in the Multiply Victimized and Predominantly ECV classes reported the highest levels of sexual risk behavior, including more lifetime sexual partners and a greater likelihood of receiving STD treatment and using substances before sex. Conclusions Women with different patterns of violent experiences differed in their sexual risk behavior. Interventions to reduce sexual risk should address violence against women, focusing on experiences with multiple types of violence and experiences specifically with ECV. Additional research is needed to determine the best ways to address violence in sexual risk reduction interventions. PMID:23626921

  8. IEEE Std 101-1972: IEEE guide for the statistical analysis of thermal life test data

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Procedures for estimating the thermal life of electrical insulation systems and materials call for life tests at several temperatures, usually well above the expected normal operating temperature. By the selection of high temperatures for the tests, life of the insulation samples will be terminated, according to some selected failure criterion or criteria, within relatively short times -- typically one week to one year. The result of these thermally accelerated life tests will be a set of data of life values for a corresponding set of temperatures. Usually the data consist of a set of life values for each of two to four (occasionally more) test temperatures, 10 C to 25 C apart. The objective then is to establish from these data the mean life vales at each temperature and the functional dependence of life on temperature, as well as the statistical consistency and the confidence to be attributed to the mean life values and the functional life temperature dependence. The purpose of this guide is to assist in this objective and to give guidance for comparing the results of tests on different materials and of different tests on the same materials

  9. MIL-STD-1553 dynamic bus controller/remote terminal hybrid set

    Science.gov (United States)

    Friedman, S. N.

    This paper describes the performance, physical and electrical requirements of a Dual Redundant BUS Interface Unit (BIU) acting as a BUS Controller Interface Unit (BCIU) or Remote Terminal Unit (RTU) between a Motorola 68000 VME BUS and MIL-STD-1553B Multiplex Data Bus. A discussion of how the BIU Hybrid set is programmed, and operates as a BCIU or RTU, will be included. This paper will review Dynamic Bus Control and other Mode Code capabilities. The BIU Hybrid Set interfaces to a 68000 Microprocessor with a VME Bus using programmed I/O transfers. This special interface will be discussed along with the internal Dual Access Memory (4K x 16) used to support the data exchanges between the CPU and the BIU Hybrid Set. The hybrid set's physical size and power requirements will be covered. This includes the present Double Eurocard the BIU function is presently being offered on.

  10. Rapid tests for diagnosing syphilis: validation in an STD clinic in the Amazon Region, Brazil Testes rápidos para diagnóstico de sífilis: validação em clínica de DST na Região Amazônica, Brasil

    Directory of Open Access Journals (Sweden)

    Adele Schwartz Benzaken

    2007-01-01

    Full Text Available Correct, early diagnosis and treatment of syphilis are essential for its control. Traditional diagnostic tests depend on specialized equipment, installations, and human resources. In the search for quick, simple tests, a project was conducted on the validation and reproducibility of four different tests, previously assessed by WHO reference laboratories. The study also verified the operational characteristics and acceptance by patients and health professionals. Samples obtained at an STD clinic were from 541 and 248 patients with 51 and 52 positive results according to FTA-Abs (gold standard in studies 1 and 2, respectively. The sensitivity varied from 84 to 96%, specificity was greater than 98%, and PPV was > 90%. Reproducibility was > 97% and kappa index 0.94, comparing the results obtained by different health workers. The tests took less than 20 minutes to perform, and more than 90% of patients agreed to wait up to two hours for the results. The tests presented the necessary requirements for use in diagnosis of syphilis, thus providing an additional option for controlling this disease.O diagnóstico e o tratamento corretos e precoces da sífilis são essenciais para o seu controle. Os testes diagnósticos tradicionais dependem de equipamentos, instalações e recursos humanos especializados. Na busca de testes de execução simplificada e rápida, realizou-se projeto de validação e da reprodutibilidade de quatro diferentes testes anteriormente avaliados pelos laboratórios de referência da Organização Mundial da Saúde. Verificaram-se também as características operacionais e aceitabilidade dos pacientes e dos profissionais de saúde. As amostras obtidas numa clínica de DST constaram de 541 e 248 pacientes com 51 e 52 positivos no FTA-Abs (padrão ouro nos estudos 1 e 2, respectivamente. A sensibilidade variou entre 84 e 96%, especificidade superior a 98% e valor preditivo positivo > 90%. A reprodutibilidade foi superior a 97% e 0

  11. TB Testing for People Living with HIV

    Centers for Disease Control (CDC) Podcasts

    2012-07-23

    Dr. Kenneth Castro, Director of the Division of Tuberculosis Elimination, explains why it is important for people living with HIV to be tested for TB.  Created: 7/23/2012 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 7/23/2012.

  12. Furnace System Testing to Support Lower-Temperature Stabilization of High Chloride Plutonium Oxide Items at the Hanford Plutonium Finishing Plant

    International Nuclear Information System (INIS)

    Schmidt, Andrew J.; Gerber, Mark A.; Fischer, Christopher M.; Elmore, Monte R.

    2003-01-01

    High chloride content plutonium (HCP) oxides are impure plutonium oxide scrap which contains NaCl, KCl, MgCl2 and/or CaCl2 salts at potentially high concentrations and must be stabilized at 950 C per the DOE Standard, DOE-STD-3013-2000. The chlorides pose challenges to stabilization because volatile chloride salts and decomposition products can corrode furnace heating elements and downstream ventilation components. Thermal stabilization of HCP items at 750 C (without water washing) is being investigated as an alternative method for meeting the intent of DOE STD 3013-2000. This report presents the results from a series of furnace tests conducted to develop material balance and system operability data for supporting the evaluation of lower-temperature thermal stabilization

  13. Time and Temperature Test Results for PFP Thermal Stabilization Furnaces

    International Nuclear Information System (INIS)

    COMPTON, J.A.

    2000-01-01

    The national standard for plutonium storage acceptability (standard DOE-STD-3013-99, generally known as ''the 3013 standard'') has been revised to clarify the requirement for processes that will produce acceptable storage materials. The 3013 standard (Reference 1) now states that ''Oxides shall be stabilized by heating the material in an oxidizing atmosphere to a Material Temperature of at least 950 C (1742 F) for not less than 2 hours.'' The process currently in use for producing stable oxides for storage at the Plutonium Finishing Plant (PFP) heats a furnace atmosphere to 1000 C and holds it there for 2 hours. The temperature of the material being stabilized is not measured directly during this process. The Plutonium Process Support Laboratories (PPSL) were requested to demonstrate that the process currently in use at PFP is an acceptable method of producing stable plutonium dioxide consistently. A spare furnace identical to the production furnaces was set up and tested under varying conditions with non-radioactive surrogate materials. Reference 2 was issued to guide the testing program. The process currently in use at the PFP for stabilizing plutonium-bearing powders was shown to heat all the material in the furnace to at least 950 C for at least 2 hours. The current process will work for (1) relatively pure plutonium dioxide, (2) dioxide powders mixed with up to 20 weight percent magnesium oxide, and (3) dioxide powders with up to 11 weight percent magnesium oxide and 20 weight percent magnesium nitrate hexahydrate. Time and temperature data were also consistent with a successful demonstration for a mixture containing 10 weight percent each of sodium and potassium chloride; however, the molten chloride salts destroyed the thermocouples in the powder and temperature data were unavailable for part of that run. These results assume that the current operating limits of no more than 2500 grams per furnace charge and a powder height of no more than 1.5 inches remain

  14. Using the Auditory Hazard Assessment Algorithm for Humans (AHAAH) With Hearing Protection Software, Release MIL-STD-1474E

    Science.gov (United States)

    2013-12-01

    unfolding.” Invited article in NHCA’s Spectrum. 1997 MIL-STD-1474D. (1997). “Department of defense design criteria. Noise limits,” http...Passenger Safety, Washington, DC. Price, G. R. (1997). “Understanding hazard from intense sounds.” Invited seminar to Audiology Department, University of...Putting theory into practice.” In H. M. Borchgrevink (Ed.), Hearing and hearing prophylaxis, Scandinavian Audiology Supplement 16 (pp. 111-121

  15. CCTF CORE I test results

    International Nuclear Information System (INIS)

    Murao, Yoshio; Sudoh, Takashi; Akimoto, Hajime; Iguchi, Tadashi; Sugimoto, Jun; Fujiki, Kazuo; Hirano, Kenmei

    1982-07-01

    This report presents the results of the following CCTF CORE I tests conducted in FY. 1980. (1) Multi-dimensional effect test, (2) Evaluation model test, (3) FLECHT coupling test. On the first test, one-dimensional treatment of the core thermohydrodynamics was discussed. On the second and third tests, the test results were compared with the results calculated by the evaluation model codes and the results of the corresponding FLECHT-SET test (Run 2714B), respectively. The work was performed under contracts with the Atomic Energy Bureau of Science and Technology Agency of Japan. (author)

  16. Monitoring temporal changes in the specificity of an oral HIV test: a novel application for use in postmarketing surveillance.

    Directory of Open Access Journals (Sweden)

    Joseph R Egger

    Full Text Available BACKGROUND: Postmarketing surveillance is routinely conducted to monitor performance of pharmaceuticals and testing devices in the marketplace. However, these surveillance methods are often done retrospectively and, as a result, are not designed to detect issues with performance in real-time. METHODS AND FINDINGS: Using HIV antibody screening test data from New York City STD clinics, we developed a formal, statistical method of prospectively detecting temporal clusters of poor performance of a screening test. From 2005 to 2008, New York City, as well as other states, observed unexpectedly high false-positive (FP rates in an oral fluid-based rapid test used for screening HIV. We attempted to formally assess whether the performance of this HIV screening test statistically deviated from both local expectation and the manufacturer's claim for the test. Results indicate that there were two significant temporal clusters in the FP rate of the oral HIV test, both of which exceeded the manufacturer's upper limit of the 95% CI for the product. Furthermore, the FP rate of the test varied significantly by both STD clinic and test lot, though not by test operator. CONCLUSIONS: Continuous monitoring of surveillance data has the benefit of providing information regarding test performance, and if conducted in real-time, it can enable programs to examine reasons for poor test performance in close proximity to the occurrence. Techniques used in this study could be a valuable addition for postmarketing surveillance of test performance and may become particularly important with the increase in rapid testing methods.

  17. Test Operations Procedure (TOP) 01-1-020 Tropical Regions Environmental Considerations

    Science.gov (United States)

    2013-02-08

    to exude tannins , sugars, and other natural plant products, which may support microbial growth and corrosion processes. 2.2 Test Site Severity...Containers in Humid Environments, US Army Tropic Test Center, TECOM Project No. 7-C0-PB5-TT1-004, 1978. 16. A Technical Analysis to Identify Ideal...1973. 37. MIL-STD-810G, Test Method Standard, Environmental Engineering Considerations and Laboratory Tests, 2008. 38. A Technical Analysis

  18. Take Charge. Take the Test. "You Know" PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    2012-03-07

    As part of the Take Charge. Take the Test. campaign, this 60 second PSA encourages African American women to get tested for HIV. Locations for a free HIV test can be found by visiting hivtest.org/takecharge or calling 1-800-CDC-INFO (1-800-232-4636).  Created: 3/7/2012 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 3/7/2012.

  19. THE SOFTWARE OF THE ADVANCED MIL-STD-1553B MULTIPLEX DATA BUS TESTER AND INTERFACE MODULE: FEATURES AND IMPLEMENTATION DETAILS

    Directory of Open Access Journals (Sweden)

    Dmitry E. Gouriev

    2018-03-01

    Full Text Available The UEM-MK is a new module of universal device and parametric tester of multiplex data bus, which meets all requirements for testing equipment for use in validation of devices against requirements of GOST R 52070-2003 (the same as MIL-STD-1553B Notice 4. The module can handle work of bus controller, up to 32 remote terminals and bus monitor/analyser simultaneously, can inject errors of all necessary types. In the article the software of the module is described. The software consist of: the driver, the control panel, the self-test program, the program for validation testing of remote terminals (PTOU, the extended function library, integrated environment (program BPOUEM. The latter three components are top-level components for users and software developments. The driver provides a connection with the module. Control panel provides module identification, self-testing and simplest actions on the bus in interactive mode. The PTOU program provides validation testing of remote terminals in accordance with the GOST R 51765-2001 test plan. The BPOUEM program lets users to create their own scenarios for testing and network environment imitation in interactive mode, whereas the extended function library lets the same in a form of application programs. Both these components also let to record and analyse bus traffic. The purpose, features and implementation details of all mentioned software components are described in the article, however, especial attention is paid to extended function library and the BPOUEM program.

  20. UNDP supports HIV / AIDS / STD project for war-torn south Sudan -- a special report.

    Science.gov (United States)

    Del Viso, N

    1997-01-01

    This article describes a UN HIV/AIDS and sexually transmitted disease (STD) project in war-torn south Sudan. The 3-year project relies on collaboration between adversaries and implementation in government-held and rebel-controlled areas. The project aims to reduce the risk and vulnerability to HIV/AIDS/STDs and to foster dialogue among adversaries as a means of conflict resolution. The World Health Organization will contribute technical assistance. Local partners including the government, the Southern Sudan Independence Movement, and the Sudanese People's Liberation Movement will contribute resources valued at about $100,000. The total UN contribution is about $300,000. HIV transmission has increased due to a high concentration of military personnel and population displacement. Available information suggests that the south has the highest HIV prevalence and 46% of known AIDS cases. STDs increased from 2.3% in 1989 to 14.1% in 1994. The project focuses on women, youth, and other vulnerable groups. The project is in its 9-month preparatory phase. The preparatory phase includes analysis of the HIV/AIDS/STD situation, design of a sustainable program, assessment of causative factors, and establishment of a mechanism for effectively coordinating the project. The civil war will affect priorities, strategies, and activities. In government-controlled areas, the Sudan National AIDS program will conduct activities. In non-government areas, the Sudan Rehabilitation and Relief Association, the Relief Association for South Sudan, and health and humanitarian authorities of the liberation groups will conduct programs. The UN Office of Special Projects will provide oversight during the preparatory phase. Sudan's UN Country Theme Group on HIV/AIDS will be the coordinating group.

  1. A DOE-STD-3009 hazard and accident analysis methodology for non-reactor nuclear facilities

    International Nuclear Information System (INIS)

    MAHN, JEFFREY A.; WALKER, SHARON ANN

    2000-01-01

    This paper demonstrates the use of appropriate consequence evaluation criteria in conjunction with generic likelihood of occurrence data to produce consistent hazard analysis results for nonreactor nuclear facility Safety Analysis Reports (SAR). An additional objective is to demonstrate the use of generic likelihood of occurrence data as a means for deriving defendable accident sequence frequencies, thereby enabling the screening of potentially incredible events ( -6 per year) from the design basis accident envelope. Generic likelihood of occurrence data has been used successfully in performing SAR hazard and accident analyses for two nonreactor nuclear facilities at Sandia National Laboratories. DOE-STD-3009-94 addresses and even encourages use of a qualitative binning technique for deriving and ranking nonreactor nuclear facility risks. However, qualitative techniques invariably lead to reviewer requests for more details associated with consequence or likelihood of occurrence bin assignments in the test of the SAR. Hazard analysis data displayed in simple worksheet format generally elicits questions about not only the assumptions behind the data, but also the quantitative bases for the assumptions themselves (engineering judgment may not be considered sufficient by some reviewers). This is especially true where the criteria for qualitative binning of likelihood of occurrence involves numerical ranges. Oftentimes reviewers want to see calculations or at least a discussion of event frequencies or failure probabilities to support likelihood of occurrence bin assignments. This may become a significant point of contention for events that have been binned as incredible. This paper will show how the use of readily available generic data can avoid many of the reviewer questions that will inevitably arise from strictly qualitative analyses, while not significantly increasing the overall burden on the analyst

  2. Engineering Sensitivity Improvement of Helium Mass Spectrometer Leak Detection System by Means Global Hard Vacuum Test

    International Nuclear Information System (INIS)

    Sigit Asmara Santa

    2006-01-01

    The engineering sensitivity improvement of Helium mass spectrometer leak detection using global hard vacuum test configuration has been done. The purpose of this work is to enhance the sensitivity of the current leak detection of pressurized method (sniffer method) with the sensitivity of 10 -3 ∼ 10 -5 std cm 3 /s, to the global hard vacuum test configuration method which can be achieved of up to 10 -8 std cm 3 /s. The goal of this research and development is to obtain a Helium leak test configuration which is suitable and can be used as routine bases in the quality control tests of FPM capsule and AgInCd safety control rod products. The result is an additional instrumented vacuum tube connected with conventional Helium mass spectrometer. The pressure and temperature of the test object during the leak measurement are simulated by means of a 4.1 kW capacity heater and Helium injection to test object, respectively. The addition of auxiliary mechanical vacuum pump of 2.4 l/s pumping speed which is directly connected to the vacuum tube, will reduce 86 % of evacuation time. The reduction of the measured sensitivity due to the auxiliary mechanical vacuum pump can be overcome by shutting off the pump soon after Helium mass spectrometer reaches its operating pressure condition. (author)

  3. Longitudinal prediction of sexually transmitted diseases among adolescents: results from a national survey.

    Science.gov (United States)

    Crosby, R; Leichliter, J S; Brackbill, R

    2000-05-01

    Although adolescent use of condoms has been increasing, incidence of sexually transmitted diseases (STDs) among young people remains high. To identify adolescent behavioral risk factors for acquiring STDs, this study assessed adolescent self-reports of acquired chlamydia, gonorrhea, syphilis, and trichomoniasis within 1 year after a baseline interview. We used data from the National Longitudinal Survey of Adolescent Health for this study. Data were collected in the homes of survey respondents, using audio-computer-assisted self-interview (audio-CASI) technology and interviews. Participants were enrolled in grades 7-11 from 134 U.S. schools. A cohort of 4593 sexually experienced adolescents was followed for 1 year. We conducted separate analyses for both genders. About 3.1% of the male adolescents and nearly 4.7% of the female adolescents reported having had at least one STD after the baseline interview. For both genders, self-reported STD infection before baseline interview was the best predictor of self-reported STD infection 1 year after baseline interview. Female adolescents were more likely to report diagnosis with an STD after baseline if they self-identified as a minority race (other than Asian) and perceived that their mother did not disapprove of their having sex. Female adolescents were less likely to report STDs if they perceived that adults care about them. No additional variables predicted STD diagnosis after baseline for male adolescents. We conclude that past history of STD infection is the most important indicator of subsequent STD infection among adolescents. Thus, this study suggests the benefit of specific clinical efforts designed to promote preventive behavior among adolescents newly diagnosed with an STD.

  4. Theoretical domains: a heuristic for teaching behavioral theory in HIV/STD prevention courses.

    Science.gov (United States)

    Dolcini, M Margaret; Canin, Lisa; Gandelman, Alice; Skolnik, Heidi

    2004-10-01

    The HIV/STD epidemics have broadened the need for better behavioral intervention programs and highlighted the importance of providing training in behavioral theory to frontline program practitioners. However, there is a lack of effective methods for teaching theoretical concepts to people who may not have a background in behavioral science. This article presents a solution to this challenge by introducing a new heuristic for teaching theory and for placing individual theories/models in a broader context. Using a broad framework, we identify five domains that influence behavior: risk appraisal, self-perceptions, emotions and arousal, relationships and social influence, and environmental and structural factors. Each domain is described, and a brief overview of supporting literature is provided. Following the presentation of domains, we discuss course structure and activities.

  5. Testing of Hand-Held Mine Detection Systems

    Science.gov (United States)

    2015-01-08

    Military Standards (MIL-STD), and if necessary, International Test Operations Procedures (ITOP) and North Atlantic Treaty Organization (NATO...include grass vegetation, loose and compacted ground, virgin ground, controlled wash beds. Allow for a calibration to be available for each type of...MSDS material safety data sheet N North NATO North Atlantic Treaty Organization NBC nuclear, biological, chemical NMMC no metal main charge NMPP

  6. STD Clinic Patients' Awareness of Non-AIDS Complications of HIV Infection.

    Science.gov (United States)

    Castro, José Guillermo; Granovsky, Inna; Jones, Deborah; Weiss, Stephen M

    2015-01-01

    Participants were recruited from a sexually transmitted disease (STD) clinic in Florida and were assessed regarding the knowledge and awareness of non-AIDS conditions associated with HIV infection. Questionnaires were administered before and after a brief information session on non-AIDS conditions associated with HIV infection. Participants included men (n = 46) and women (n = 51). Prior to the information session, at baseline, only 34% of the participants were worried about HIV infection. Most participants (82%) agreed that HIV could be treated with antiretroviral therapy (ART), while only 38% were aware that HIV-associated conditions cannot be easily treated with ART. After the information session, almost all participants reported they were concerned regarding the risk of HIV infection. High-risk patients may have limited knowledge about the consequences of HIV infection beyond the traditional AIDS-associated conditions. Increased awareness of these less known consequences of HIV infection may decrease the potential for complacency regarding acquiring HIV infection. © The Author(s) 2014.

  7. Chlamydia trachomatis serovar distribution and other sexually transmitted coinfections in subjects attending an STD outpatients clinic in Italy.

    Science.gov (United States)

    Marangoni, Antonella; Foschi, Claudio; Nardini, Paola; D'Antuono, Antonietta; Banzola, Nicoletta; Di Francesco, Antonietta; Ostanello, Fabio; Russo, Incoronata; Donati, Manuela; Cevenini, Roberto

    2012-04-01

    We studied the prevalence of Chlamydia trachomatis (CT) urogenital infection and the distribution of different genotypes in a non-selected STD population of 1625 patients, evaluating presence of coinfections with other sexually transmitted diseases. Each patient was bled to perform serological tests for syphilis and HIV, then urethral or endocervical swabs were obtained for the detection of CT and Neisseria gonorrhoeae by culture. DNA extracted from remnant positive swabs was amplified by omp1 Nested PCR and products were sequenced. Total prevalence of CT infection was 6.3% (103/1625), with strong differences between men and women (11.4% vs 3.9%, Pmen than in women (Pmen and women (P=0.042) and among patients with or without coinfection (P=0.035); patients infected by serovar D/Da showed the highest coinfection rate. This study can be considered a contribution in increasing knowledge on CT serovar distribution in Italy. Further studies are needed to better define molecular epidemiology of CT infection and to investigate its correlation with other STDs.

  8. Take Charge. Take the Test. "Look Out For Yourself" PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    2012-03-07

    As part of the Take Charge. Take the Test. campaign, this 60 second PSA encourages African American women to get tested for HIV. Locations for a free HIV test can be found by visiting hivtest.org/takecharge or calling 1-800-CDC-INFO (1-800-232-4636).  Created: 3/7/2012 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 3/7/2012.

  9. Wear performance of neat and vitamin E blended highly cross-linked PE under severe conditions: The combined effect of accelerated ageing and third body particles during wear test.

    Science.gov (United States)

    Affatato, Saverio; De Mattia, Jonathan Salvatore; Bracco, Pierangiola; Pavoni, Eleonora; Taddei, Paola

    2016-12-01

    The objective of this study is to evaluate the effects of third-body particles on the in vitro wear behaviour of three different sets of polyethylene acetabular cups after prolonged testing in a hip simulator and accelerated ageing. Vitamin E-blended, cross-linked polyethylene (XLPE_VE), cross-linked polyethylene (XLPE) and conventional polyethylene (STD_PE) acetabular cups were simulator tested for two million cycles under severe conditions (i.e. by adding third-body particles to the bovine calf serum lubricant). Micro-Fourier Transform Infrared and micro-Raman spectroscopic analyses, differential scanning calorimetry, and crosslink density measurements were used to characterize the samples at a molecular level. The STD_PE cups had twice mass loss than the XLPE_VE components and four times than the XLPE samples; statistically significant differences were found between the mass losses of the three sets of cups. The observed wear trend was justified on the basis of the differences in cross-link density among the samples (XLPE>XLPE_VE>STD_PE). FTIR crystallinity profiles, bulk DSC crystallinity and surface micro-Raman crystallinity seemed to have a similar behaviour upon testing: all of them (as well as the all-trans and ortho-trans contents) revealed the most significant changes in XLPE and XLPE_VE samples. The more severe third-body wear testing conditions determined more noticeable changes in all spectroscopic markers with respect to previous tests. Unexpectedly, traces of bulk oxidation were found in both STD_PE (unirradiated) and XLPE (remelting-stabilized), which were expected to be stable to oxidation; on the contrary, XLPE_VE demonstrated a high oxidative stability in the present, highly demanding conditions. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Outcomes from a community-based, participatory lay health advisor HIV/STD prevention intervention for recently arrived immigrant Latino men in rural North Carolina, USA

    Science.gov (United States)

    Rhodes, Scott D.; Hergenrather, Kenneth C.; Bloom, Fred R.; Leichliter, Jami S.; Montaño, Jaime

    2012-01-01

    Background Latinos in the United States are at increased risk for HIV and sexually transmitted disease (STD) infection. We evaluated the efficacy of a pilot, lay health advisor (LHA) intervention designed to increase condom use and HIV testing among Latino men. Methods Fifteen LHAs (mean age=35.6; range 23–60 years) from 15 Latino soccer teams were trained and worked with their teammates for 18 months. Another 15 teams served as the control group. Data were collected at baseline and 18-months post-LHA training from a random sample of teammates from intervention and control teams. Results Data were collected from 222 men (mean age=29 years) who participated in one of the 30 teams. Relative to the control condition, participants in the intervention reported more consistent condom use in the 30 days preceding follow-up (unadjusted analysis, intervention, 65.6% vs. control, 41.3%; P<.001). Participants in the intervention were more likely to report condom use (adjusted odds ratio=2.3; CI=1.2–4.3) and HIV testing (adjusted odds ratio=2.5; CI=1.5–4.3). Conclusions LHA interventions for Latino men that are developed in partnership with community members, rely on male-centered intrapersonal networks, and are culturally congruent can enhance preventive behaviors and may reduce HIV infection. PMID:19824838

  11. Dynamic Testing of Signal Transduction Deregulation During Breast Cancer Initiation

    Science.gov (United States)

    2012-07-01

    Std. Z39.18 Victoria Seewaldt, M.D. Dynamic Testing of Signal Transduction Deregulation During Breast Cancer Initiation Duke University Durham...attomole- zeptomole range. Internal dilution curves insure a high-dynamic calibration range. DU -26 8L DU -26 6L DU -29 5R DU -22 9.2 L DU...3: Nanobiosensor technology is translated to test for pathway deregulation in RPFNA cytology obtained from 10 high-risk women with cytological

  12. Intervenção de base comunitária para a prevenção das DST/Aids na região amazônica, Brasil Community-based intervention to control STD/AIDS in the Amazon region, Brazil

    Directory of Open Access Journals (Sweden)

    Adele Schwartz Benzaken

    2007-12-01

    procedures designed in collaboration with government agents, health professionals and the community. Data on the dynamics of prostitution and condom sales in this town, preventive practices and STD/AIDS care and process assessment were collected. Actions targeting STD prevention and care in the public healthcare system, a testing center, an epidemiological surveillance system and sex workers' qualification were established concomitantly. RESULTS: It was observed the strengthening of sex workers as peer educators and their legitimization as citizens and health agents in projects involving transvestites, homosexuals and students. There was an increase in condom sales in town, as well as in condom use among sex workers; reduction in bacterial STD; and stabilization of the incidence of HIV/AIDS infections and congenital syphilis. The sustainability of the intervention program studied, organized within the sphere of action of the Sistema Único de Saúde (National Health System, was promoted by a political pact, which guaranteed headquarters and municipal law-regulated budget, as well as by the constant debate over the process and program results. CONCLUSIONS: The study strengthened the notion that effective control of STD/AIDS depends on a synergic approach that combines interventions on individual (biological-behavioral, sociocultural and programmatic levels.

  13. Water physics and chemistry data from STD casts from THELMA DALE II and other platforms from 09 August 1954 to 05 March 1959 (NODC Accession 7101380)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected from STD casts from THELMA DALE II and other platforms from 09 August 1954 to 05 March 1959. Data were submitted by...

  14. STD patients’ preferences for HIV prevention strategies

    Directory of Open Access Journals (Sweden)

    Castro JG

    2014-12-01

    Full Text Available Jose G Castro,1 Deborah L Jones,2 Stephen M Weiss2 1Infectious Diseases, Department of Medicine, 2Department of Psychiatry and Behavioral Sciences, University of Miami, Miami, FL, USA Abstract: The objective of this pilot study was to explore the knowledge of and preferences regarding effective biomedical interventions among high risk individuals attending a sexually transmitted diseases clinic, and to examine the effect of a brief information intervention on preference. Participants completed a baseline assessment, attended a presentation on human immunodeficiency virus (HIV prevention methods, and completed a postintervention assessment. Outcome measures included: demographics and sexual risk factors, self-perceived HIV risk, and knowledge and attitudes regarding new biomedical methods of HIV prevention. After the baseline evaluation, participants were provided with information on new biomedical prevention strategies. Participants were given the option to review the information by reading a pamphlet or by viewing a brief video containing the same information. Participants (n=97 were female (n=51 and male (n=46. At baseline, only a small minority of participants were aware of the newer biomedical strategies to prevent HIV infection. Postintervention, 40% endorsed having heard about the use of HIV medications to prevent HIV infection; 72% had heard that male circumcision can decrease the risk of acquiring HIV infection in men; and 73% endorsed knowledge of the potential role of microbicides in decreasing the risk of acquiring HIV. Following the intervention, the most preferred prevention method was male condoms, followed by preexposure prophylaxis, and microbicides. The least preferred methods were male circumcision and female condoms. This study provides preliminary information on knowledge and attitudes regarding newer biomedical interventions to protect against HIV infection. Keywords: STD clinic, biomedical HIV prevention, PrEP, male

  15. Multiplex immunoassay of lower genital tract mucosal fluid from women attending an urban STD clinic shows broadly increased IL1ß and lactoferrin.

    Directory of Open Access Journals (Sweden)

    Gregory T Spear

    Full Text Available BACKGROUND: More than one million new cases of sexually transmitted diseases (STDs occur each day. The immune responses and inflammation induced by STDs and other frequent non-STD microbial colonizations (i.e. Candida and bacterial vaginosis can have serious pathologic consequences in women including adverse pregnancy outcomes, infertility and increased susceptibility to infection by other pathogens. Understanding the types of immune mediators that are elicited in the lower genital tract by these infections/colonizations can give important insights into the innate and adaptive immune pathways that are activated and lead to strategies for preventing pathologic effects. METHODOLOGY/PRINCIPAL FINDINGS: 32 immune mediators were measured by multiplexed immunoassays to assess the immune environment of the lower genital tract mucosa in 84 women attending an urban STD clinic. IL-3, IL-1ß, VEGF, angiogenin, IL-8, ß2Defensin and ß3Defensin were detected in all subjects, Interferon-α was detected in none, while the remaining mediators were detected in 40% to 93% of subjects. Angiogenin, VEGF, FGF, IL-9, IL-7, lymphotoxin-α and IL-3 had not been previously reported in genital mucosal fluid from women. Strong correlations were observed between levels of TNF-α, IL-1ß and IL-6, between chemokines IP-10 and MIG and between myeloperoxidase, IL-8 and G-CSF. Samples from women with any STD/colonization had significantly higher levels of IL-8, IL-3, IL-7, IL-1ß, lactoferrin and myeloperoxidase. IL-1ß and lactoferrin were significantly increased in gonorrhea, Chlamydia, cervicitis, bacterial vaginosis and trichomoniasis. CONCLUSIONS/SIGNIFICANCE: These studies show that mucosal fluid in general appears to be an environment that is rich in immune mediators. Importantly, IL-1ß and lactoferrin are biomarkers for STDs/colonizations providing insights into immune responses and pathogenesis at this mucosal site.

  16. Investigating stakeholders' perceptions of the link between high STD rates and the current Baltimore City Public Schools' sex education curriculum

    Science.gov (United States)

    Bolden, Shenell L. T.

    The purpose of this exploratory study was to examine key stakeholders' perceptions of the current Baltimore City Public Schools' (BCPS) sex education curriculum and to gain insight into how they believe the curriculum could be modified to be more effective. A mixed methods approach using qualitative and quantitative data collection consisting of a survey, focus group interview, and individual interviews was conducted to gather information on stakeholders' perceptions. The stakeholders included: (1) former students who received their sex education courses in the Baltimore City Public School system (BCPS); (2) teachers in BCPS who were affiliated with the sex education curriculum; (3) health care professionals who screened and/or treated East Baltimore City residents for a sexually transmitted disease (STD) and; (4) one policy maker who was responsible for creating sex education curriculum at the national level. Analysis of the quantitative data from former Baltimore City Public School students revealed a general satisfaction with the current sex education curriculum. However, qualitative data from the same group of stakeholders revealed several changes they thought should be implemented into the program in an effort to improve the current curriculum. Findings from the other groups after qualitative analysis of the interviews suggest three major themes in support of curriculum change: (1) a blended curriculum that integrates both the cognitive and affective learning domains; (2) knowledge of prevention of STD's and pregnancy; and (3) authentic teaching and learning. Results from this study strongly suggest that the Baltimore City Public School system is apathetic to the sexual health needs of students and, therefore, is inadvertently contributing to the high rate of sexually transmitted diseases among young people. Keywords: Abstinence, Affective domain, Indoctrination, Behavior Modification, Cognitive domain, Sex education curriculum, Sexually Transmitted Diseases.

  17. Disability management: corporate medical department management of employee health and productivity.

    Science.gov (United States)

    Burton, W N; Conti, D J

    2000-10-01

    This study describes a proactive in-house program for managing short-term disability (STD) in the workforce of a very large banking system. The goals of this program were to (1) minimize the personal and economic impacts of STD by early intervention, (2) validate the extent and duration of STD, and (3) coordinate medical services and provide guidance to managers that would facilitate an early return to work. This program was made possible by the installation of a comprehensive database, called Occupational Medicine and Nursing Information System. This database mainly includes employees' claims for inpatient and outpatient health services, disability and workers' compensation benefits, wellness program participation, medical examinations and laboratory tests, use of prescription drugs, and results of Health Risk Appraisals. As a result of these efforts, STD event duration declined after this STD management program was implemented in locations heretofore outside the system, and by providing full pay for part-time work after STD, within the system as well. Of note, the average number of STD days per employee showed substantial variation by health plan, including the fact that it was higher (3.9 STD days/employee) for health maintenance organization participants than for indemnity plan members (2.7 STD days/employee).

  18. Using Spare Logic Resources To Create Dynamic Test Points

    Science.gov (United States)

    Katz, Richard; Kleyner, Igor

    2011-01-01

    A technique has been devised to enable creation of a dynamic set of test points in an embedded digital electronic system. As a result, electronics contained in an application specific circuit [e.g., gate array, field programmable gate array (FPGA)] can be internally probed, even when contained in a closed housing during all phases of test. In the present technique, the test points are not fixed and limited to a small number; the number of test points can vastly exceed the number of buffers or pins, resulting in a compact footprint. Test points are selected by means of spare logic resources within the ASIC(s) and/or FPGA(s). A register is programmed with a command, which is used to select the signals that are sent off-chip and out of the housing for monitoring by test engineers and external test equipment. The register can be commanded by any suitable means: for example, it could be commanded through a command port that would normally be used in the operation of the system. In the original application of the technique, commanding of the register is performed via a MIL-STD-1553B communication subsystem.

  19. Prevalence of Chlamydia trachomatis & herpes simplex virus in males with urethritis & females with cervicitis attending STD clinic.

    Science.gov (United States)

    Malathi, J; Madhavan, H N; Therese, K L; Rinku, J P; Narendar, K P

    2002-08-01

    Cervicitis and urethritis due to Chlamydia trachomatis are common sexually transmitted diseases. However, there is a paucity of information on urethritis and mucopurulent cervicitis due to herpes simplex virus (HSV) from India. We used polymerase chain reaction (PCR) to find out the prevalence of C. trachomatis and HSV associated urethritis in males and mucopurulent cervicitis in females attending a sexually transmitted diseases (STD) clinic. Twenty five endocervical swabs from 25 women with mucopurulent cervicitis and 75 urethral swabs from 72 males with urethritis were processed for the detection of C. trachomatis and HSV by antigen detection by fluorescent antibody test (FAT), culture and PCR. Among the 25 women, one (4.0%) was positive for C. trachomatis and 3 (12.0%) were positive for HSV by PCR. FAT and culture were negative. Nine (12.0%) of the 75 urethral swabs were positive for C. trachomatis and 5 (6.6%) were positive for HSV by PCR. Among the 9 positive by PCR for C. trachomatis, 3 (4.0%) were positive by FAT. Cultures for both organisms were negative. Endocervicitis and male urethritis due to C. trachomatis and HSV are not uncommon among high-risk individuals. The diagnosis could be established mainly by PCR.

  20. IEEE Std 649-1991: IEEE standard for qualifying Class 1E motor control centers for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The basic principles, requirements, and methods for qualifying Class 1E motor control centers for both harsh and mild environment applications in nuclear power generating stations are described. In addition to defining specific qualification requirements for Class 1E motor control centers and their components in accordance with the more general qualification requirements of IEEE Std 323-1983, this standard is intended to provide guidance in establishing a qualification program for demonstrating the adequacy of Class 1E motor control centers in nuclear power generating station applications

  1. Irradiation effects test Series Scoping Test 1: test results report

    International Nuclear Information System (INIS)

    Quapp, W.J.; Allison, C.M.; Farrar, L.C.

    1977-09-01

    The report describes the results of the first scoping test in the Irradiation Effects Test Series conducted by the Thermal Fuels Behavior Program, which is part of the Water Reactor Research Program of EG and G Idaho, Inc. The research is sponsored by the United States Nuclear Regulatory Commission. This test used an unirradiated, three-foot-long, PWR-type fuel rod. The objective of this test was to thoroughly evaluate the remote fabrication procedures to be used for irradiated rods in future tests, handling plans, and reactor operations. Additionally, selected fuel behavior data were obtained. The fuel rod was subjected to a series of preconditioning power cycles followed by a power increase which brought the fuel rod power to about 20.4 kW/ft peak linear heat rating at a coolant mass flux of 1.83 x 10 6 lb/hr-ft 2 . Film boiling occurred for a period of 4.8 minutes following flow reductions to 9.6 x 10 5 and 7.5 x 10 5 lb/hr-ft 2 . The test fuel rod failed following reactor shutdown as a result of heavy internal and external cladding oxidation and embrittlement which occurred during the film boiling operation

  2. Alternate Material Pallet, 40" x 48", MIL-STD-1660, Engineering Evaluation Tests

    National Research Council Canada - National Science Library

    Dugan, Jeffery

    2003-01-01

    The U.S. Army Defense Ammunition Center (DAC), Validation Engineering Division (SJMAC-DEV) conducted Engineering Evaluation Tests to determine if the Alternate Material Pallet manufactured by Hunter Paine Enterprise, Inc...

  3. Irradiation effects test series, test IE-5. Test results report

    International Nuclear Information System (INIS)

    Croucher, D.W.; Yackle, T.R.; Allison, C.M.; Ploger, S.A.

    1978-01-01

    Test IE-5, conducted in the Power Burst Facility at the Idaho National Engineering Laboratory, employed three 0.97-m long pressurized water reactor type fuel rods, fabricated from previously irradiated zircaloy-4 cladding and one similar rod fabricated from unirradiated cladding. The objectives of the test were to evaluate the influence of simulated fission products, cladding irradiation damage, and fuel rod internal pressure on pellet-cladding interaction during a power ramp and on fuel rod behavior during film boiling operation. The four rods were subjected to a preconditioning period, a power ramp to an average fuel rod peak power of 65 kW/m, and steady state operation for one hour at a coolant mass flux of 4880 kg/s-m 2 for each rod. After a flow reduction to 1800 kg/s-m 2 , film boiling occurred on one rod. Additional flow reductions to 970 kg/s-m 2 produced film boiling on the three remaining fuel rods. Maximum time in film boiling was 80s. The rod having the highest initial internal pressure (8.3 MPa) failed 10s after the onset of film boiling. A second rod failed about 90s after reactor shutdown. The report contains a description of the experiment, the test conduct, test results, and results from the preliminary postirradiation examination. Calculations using a transient fuel rod behavior code are compared with the test results

  4. Fatores associados ao uso de preservativo masculino e ao conhecimento sobre DST/AIDS em adolescentes de escolas públicas e privadas do Município de São Paulo, Brasil Factors associated with condom use and knowledge about STD/AIDS among teenagers in public and private schools in São Paulo, Brazil

    Directory of Open Access Journals (Sweden)

    Laura B. Motta Martins

    2006-02-01

    Full Text Available Comparar o conhecimento sobre DST/AIDS e avaliar fatores associados ao conhecimento adequado e ao uso consistente do preservativo masculino, em adolescentes de escolas públicas e privadas do Município de São Paulo. Participaram 1.594 adolescentes entre 12 e 19 anos, de 13 escolas públicas e 5 privadas, que responderam um questionário sobre DST/AIDS e uso de preservativo. Calcularam-se as razões de prevalência com intervalo de confiança de 95%. O escore de conhecimento sobre DST teve o ponto de corte equivalendo a 50% de acerto. Os testes estatísticos foram qui-quadrado e Wilcoxon-Gehan. Realizou-se regressão múltipla de Poisson. O uso consistente de preservativo foi 60% nas escolas privadas e 57,1% nas públicas (p > 0,05 e esteve associado ao sexo masculino e menor nível sócio-econômico. O sexo feminino, maior escolaridade, escola privada, cor branca e estado marital solteiro associaram-se ao maior conhecimento sobre DST. Os adolescentes de escola pública e privada apresentam conhecimento adequado sobre prevenção de DST, entretanto esse conhecimento não determina adoção de atitudes efetivas de prevenção. Programas de conscientização sobre DST/AIDS devem ser ampliados visando minimizar as vulnerabilidades.This study aimed to compare knowledge about STD/AIDS and identify the factors associated with adequate knowledge and consistent use of male condoms in teenagers from public and private schools in the city of São Paulo, Brazil. We selected 1,594 adolescents ranging 12 to 19 years of age in 13 public schools and 5 private schools to complete a questionnaire on knowledge of STD/AIDS and use of male condoms. Prevalence ratios were computed with a 95% confidence interval. The score on STD knowledge used a cutoff point corresponding to 50% of correct answers. Statistical tests were chi-square and Poisson multiple regression. Consistent use of male condoms was 60% in private and 57.1% in public schools (p > 0.05 and was

  5. Close-up of the alpha-1,3-Gal epitope as defined by a monoclonal chimeric IgE and human serum using saturation transfer difference (STD) NMR

    DEFF Research Database (Denmark)

    Plum, Melanie; Michel, Yvonne; Wallach, Katharina

    2011-01-01

    of an alpha-Gal-specific murine IgM antibody was employed to construct chimeric IgE and IgG antibodies. Reactivity and specificity of the resulting antibodies were assessed by means of ELISA and receptor binding studies. Using defined carbohydrates, interaction of the IgE and human serum was assessed...... by mediator release assays, surface plasmon resonance (SPR) and STD NMR analyses. The alpha-Gal-specific chimeric IgE and IgG antibodies were proven functional regarding interaction with antigen and Fc receptors. SPR measurements demonstrated affinities in the micromolar range. In contrast to a reference...

  6. Pressure loss tests for DR-BEP of fullsize 17 x 17 PWR fuel assembly

    International Nuclear Information System (INIS)

    Chung, Moon Ki; Chun, Se Young; Chang, Seok Kyu; Won, Soon Youn; Cho, Young Rho; Kim, Bok Deuk; Min, Kyoung Ho

    1993-01-01

    This report describes the conditions, procedure and results in the pressure loss tests carried out for a double grid type debris resistance bottom end piece (DR-BEP) designed by KAERI. In this test, the pressure loss coefficients of the full size 17 x 17 PWR simulated fuel assembly with DR-BET and with standard-BEP were measured respectively, and the pressure loss coefficients of DR-BEP were compared with the coefficients of STD-BET. The test conditions fall within the ranges of loop pressure from 5.2 to 45 bar, loop temperature from 27 to 221 deg C and Reynolds number in fuel bundle from 2.17 x 10 4 to 3.85 x 10 5 . (Author) 5 refs., 18 figs., 5 tabs

  7. JPL Thermal Design Modeling Philosophy and NASA-STD-7009 Standard for Models and Simulations - A Case Study

    Science.gov (United States)

    Avila, Arturo

    2011-01-01

    The Standard JPL thermal engineering practice prescribes worst-case methodologies for design. In this process, environmental and key uncertain thermal parameters (e.g., thermal blanket performance, interface conductance, optical properties) are stacked in a worst case fashion to yield the most hot- or cold-biased temperature. Thus, these simulations would represent the upper and lower bounds. This, effectively, represents JPL thermal design margin philosophy. Uncertainty in the margins and the absolute temperatures is usually estimated by sensitivity analyses and/or by comparing the worst-case results with "expected" results. Applicability of the analytical model for specific design purposes along with any temperature requirement violations are documented in peer and project design review material. In 2008, NASA released NASA-STD-7009, Standard for Models and Simulations. The scope of this standard covers the development and maintenance of models, the operation of simulations, the analysis of the results, training, recommended practices, the assessment of the Modeling and Simulation (M&S) credibility, and the reporting of the M&S results. The Mars Exploration Rover (MER) project thermal control system M&S activity was chosen as a case study determining whether JPL practice is in line with the standard and to identify areas of non-compliance. This paper summarizes the results and makes recommendations regarding the application of this standard to JPL thermal M&S practices.

  8. Anonymous or confidential HIV counseling and voluntary testing in federally funded testing sites--United States, 1995-1997.

    Science.gov (United States)

    1999-06-25

    Human immunodeficiency virus (HIV) counseling and voluntary testing (CT) programs have been an important part of national HIV prevention efforts since the first HIV antibody tests became available in 1985. In 1995, these programs accounted for approximately 15% of annual HIV antibody testing in the United States, excluding testing for blood donation. CT opportunities are offered to persons at risk for HIV infection at approximately 11,000 sites, including dedicated HIV CT sites, sexually transmitted disease (STD) clinics, drug-treatment centers, hospitals, and prisons. In 39 states, testing can be obtained anonymously, where persons do not have to give their name to get tested. All states provide confidential testing (by name) and have confidentiality laws and regulations to protect this information. This report compares patterns of anonymous and confidential testing in all federally funded CT programs from 1995 through 1997 and documents the importance of both types of testing opportunities.

  9. Potential Impact and Acceptability of Internet Partner Notification for Men Who Have Sex with Men and Transgender Women Recently Diagnosed with STD in Lima, Peru

    Science.gov (United States)

    Clark, Jesse L; Segura, Eddy R; Perez-Brumer, Amaya G; Reisner, Sari L; Peinado, Jesus; Salvatierra, Hector J; Sanchez, Jorge; Lama, Javier R

    2014-01-01

    We assessed the potential impact of internet partner notification (PN) among MSM and transgender women in Peru recently diagnosed with STD. Use of internet PN was anticipated for 55.9% of recent partners, including 43.0% of partners not currently expected to be notified, a 20.6% increase in anticipated notification outcomes. PMID:24326581

  10. MITG test procedure and results

    International Nuclear Information System (INIS)

    Eck, M.E.; Mukunda, M.

    1983-01-01

    Elements and modules for Radioisotope Thermoelectric Generator have been performance tested since the inception of the RTG program. These test articles seldom resembled flight hardware and often lacked adequate diagnostic instrumentation. Because of this, performance problems were not identified in the early stage of program development. The lack of test data in an unexpected area often hampered the development of a problem solution. A procedure for conducting the MITG Test was developed in an effort to obtain data in a systematic, unambiguous manner. This procedure required the development of extensive data acquisition software and test automation. The development of a facility to implement the test procedure, the facility hardware and software requirements, and the results of the MITG testing are the subject of this paper

  11. A real time data acquisition system using the MIL-STD-1553B bus. [for transmission of data to host computer for control law processing

    Science.gov (United States)

    Peri, Frank, Jr.

    1992-01-01

    A flight digital data acquisition system that uses the MIL-STD-1553B bus for transmission of data to a host computer for control law processing is described. The instrument, the Remote Interface Unit (RIU), can accommodate up to 16 input channels and eight output channels. The RIU employs a digital signal processor to perform local digital filtering before sending data to the host. The system allows flexible sensor and actuator data organization to facilitate quick control law computations on the host computer. The instrument can also run simple control laws autonomously without host intervention. The RIU and host computer together have replaced a similar larger, ground minicomputer system with favorable results.

  12. Evaluation of a Statewide HIV-HCV-STD Online Clinical Education Program by Healthcare Providers - A Comparison of Nursing and Other Disciplines.

    Science.gov (United States)

    Wang, Dongwen; Luque, Amneris E

    2016-01-01

    The New York State HIV-HCV-STD Clinical Education Initiative (CEI) has developed a large repository of online resources and disseminated them to a wide range of healthcare providers. To evaluate the CEI online education program and in particular to compare the self-reported measures by clinicians from different disciplines, we analyzed the data from 1,558 course completions in a study period of three months. The results have shown that the overall evaluations by the clinicians were very positive. Meanwhile, there were significant differences across the clinical disciplines. In particular, physicians and nurse practitioners were the most satisfied. In contrast, pharmacists and case/care managers recorded lower than average responses. Nurses and counselors had mixed results. Nurse practitioners' responses were very similar to physicians on most measures, but significantly different from nurses in many aspects. For more effective knowledge dissemination, online education programs should consider the unique needs by clinicians from specific disciplines.

  13. PSA de radio Mes de Concientización sobre las ETS PSA de radio (30 seg) (STD Awareness Month PSA (:30))

    Centers for Disease Control (CDC) Podcasts

    2011-04-19

    Abril es el Mes Nacional de Concientización sobre las Enfermedades de Transmisión Sexual (ETS). Las ETS pueden afectar a cualquier persona. Muchas ETS no tienen síntomas, por lo que es importante hacerse pruebas de detección.  Created: 4/19/2011 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention.   Date Released: 4/20/2011.

  14. Irradiation Effects Test Series: Test IE-3. Test results report

    International Nuclear Information System (INIS)

    Farrar, L.C.; Allison, C.M.; Croucher, D.W.; Ploger, S.A.

    1977-10-01

    The objectives of the test reported were to: (a) determine the behavior of irradiated fuel rods subjected to a rapid power increase during which the possibility of a pellet-cladding mechanical interaction failure is enhanced and (b) determine the behavior of these fuel rods during film boiling following this rapid power increase. Test IE-3 used four 0.97-m long pressurized water reactor type fuel rods fabricated from previously irradiated fuel. The fuel rods were subjected to a preconditioning period, followed by a power ramp to 69 kW/m at a coolant mass flux of 4920 kg/s-m 2 . After a flow reduction to 2120 kg/s-m 2 , film boiling occurred on the fuel rods. One rod failed approximately 45 seconds after the reactor was shut down as a result of cladding embrittlement due to extensive cladding oxidation. Data are presented on the behavior of these irradiated fuel rods during steady-state operation, the power ramp, and film boiling operation. The effects of a power ramp and power ramp rates on pellet-cladding interaction are discussed. Test data are compared with FRAP-T3 computer model calculations and data from a previous Irradiation Effects test in which four irradiated fuel rods of a similar design were tested. Test IE-3 results indicate that the irradiated state of the fuel rods did not significantly affect fuel rod behavior during normal, abnormal (power ramp of 20 kW/m per minute), and accident (film boiling) conditions

  15. Track and mode controller (TMC): a software executive for a high-altitude pointing and tracking experiment

    Science.gov (United States)

    Michnovicz, Michael R.

    1997-06-01

    A real-time executive has been implemented to control a high altitude pointing and tracking experiment. The track and mode controller (TMC) implements a table driven design, in which the track mode logic for a tracking mission is defined within a state transition diagram (STD). THe STD is implemented as a state transition table in the TMC software. Status Events trigger the state transitions in the STD. Each state, as it is entered, causes a number of processes to be activated within the system. As these processes propagate through the system, the status of key processes are monitored by the TMC, allowing further transitions within the STD. This architecture is implemented in real-time, using the vxWorks operating system. VxWorks message queues allow communication of status events from the Event Monitor task to the STD task. Process commands are propagated to the rest of the system processors by means of the SCRAMNet shared memory network. The system mode logic contained in the STD will autonomously sequence in acquisition, tracking and pointing system through an entire engagement sequence, starting with target detection and ending with aimpoint maintenance. Simulation results and lab test results will be presented to verify the mode controller. In addition to implementing the system mode logic with the STD, the TMC can process prerecorded time sequences of commands required during startup operations. It can also process single commands from the system operator. In this paper, the author presents (1) an overview, in which he describes the TMC architecture, the relationship of an end-to-end simulation to the flight software and the laboratory testing environment, (2) implementation details, including information on the vxWorks message queues and the SCRAMNet shared memory network, (3) simulation results and lab test results which verify the mode controller, and (4) plans for the future, specifically as to how this executive will expedite transition to a fully

  16. Alternative filtration testing program: Pre-evaluation of test results

    International Nuclear Information System (INIS)

    Georgeton, G.K.; Poirier, M.R.

    1990-01-01

    Based on results of testing eight solids removal technologies and one pretreatment option, it is recommended that a centrifugal ultrafilter and polymeric ultrafilter undergo further testing as possible alternatives to the Norton Ceramic filters. Deep bed filtration should be considered as a third alternative, if a backwashable cartridge filter is shown to be inefficient in separate testing

  17. Alternative filtration testing program: Pre-evaluation of test results

    Energy Technology Data Exchange (ETDEWEB)

    Georgeton, G.K.; Poirier, M.R.

    1990-09-28

    Based on results of testing eight solids removal technologies and one pretreatment option, it is recommended that a centrifugal ultrafilter and polymeric ultrafilter undergo further testing as possible alternatives to the Norton Ceramic filters. Deep bed filtration should be considered as a third alternative, if a backwashable cartridge filter is shown to be inefficient in separate testing.

  18. HIV, STD, and hepatitis risk to primary female partners of men being released from prison.

    Science.gov (United States)

    Grinstead, Olga A; Faigeles, Bonnie; Comfort, Megan; Seal, David; Nealey-Moore, Jill; Belcher, Lisa; Morrow, Kathleen

    2005-01-01

    Incarcerated men in the US are at increased risk for HIV, STDs and hepatitis, and many men leaving prison have unprotected sex with a primary female partner immediately following release from prison. This paper addresses risk to the primary female partners of men being released from prison (N = 106) by examining the prevalence of men's concurrent unprotected sex with other partners or needle sharing prior to and following release from prison (concurrent risk). Rates of concurrent risk were 46% prior to incarceration, 18% one month post release, and 24% three months post release. Multivariate analysis showed concurrent risk was significantly associated with having a female partner who had one or more HIV/STD risk factors and having a history of injection drug use. Findings demonstrate need for prevention programs for incarcerated men and their female partners.

  19. Irradiation effects test series test IE-1 test results report

    International Nuclear Information System (INIS)

    Quapp, W.J.; Allison, C.M.; Farrar, L.C.; Mehner, A.S.

    1977-03-01

    The report describes the results of the first programmatic test in the Nuclear Regulatory Commission Irradiation Effects Test Series. This test (IE-1) used four 0.97m long PWR-type fuel rods fabricated from previously irradiated Saxton fuel. The objectives of this test were to evaluate the effect of fuel pellet density on pellet-cladding interaction during a power ramp and to evaluate the influence of the irradiated state of the fuel and cladding on rod behavior during film boiling operation. Data are presented on the behavior of irradiated fuel rods during steady-state operation, a power ramp, and film boiling operation. The effects of as-fabricated gap size, as-fabricated fuel density, rod power, and power ramp rate on pellet-cladding interaction are discussed. Test data are compared with FRAP-T2 computer model predictions, and comments on the consequences of sustained film boiling operation on irradiated fuel rod behavior are provided

  20. Irradiation effects test series, test IE-5. Test results report. [PWR

    Energy Technology Data Exchange (ETDEWEB)

    Croucher, D. W.; Yackle, T. R.; Allison, C. M.; Ploger, S. A.

    1978-01-01

    Test IE-5, conducted in the Power Burst Facility at the Idaho National Engineering Laboratory, employed three 0.97-m long pressurized water reactor type fuel rods, fabricated from previously irradiated zircaloy-4 cladding and one similar rod fabricated from unirradiated cladding. The objectives of the test were to evaluate the influence of simulated fission products, cladding irradiation damage, and fuel rod internal pressure on pellet-cladding interaction during a power ramp and on fuel rod behavior during film boiling operation. The four rods were subjected to a preconditioning period, a power ramp to an average fuel rod peak power of 65 kW/m, and steady state operation for one hour at a coolant mass flux of 4880 kg/s-m/sup 2/ for each rod. After a flow reduction to 1800 kg/s-m/sup 2/, film boiling occurred on one rod. Additional flow reductions to 970 kg/s-m/sup 2/ produced film boiling on the three remaining fuel rods. Maximum time in film boiling was 80s. The rod having the highest initial internal pressure (8.3 MPa) failed 10s after the onset of film boiling. A second rod failed about 90s after reactor shutdown. The report contains a description of the experiment, the test conduct, test results, and results from the preliminary postirradiation examination. Calculations using a transient fuel rod behavior code are compared with the test results.

  1. Autopercepção de vulnerabilidade às doenças sexualmente transmissíveis e Aids em mulheres Self-assessment of STD/AIDS vulnerability among women, Brazil

    Directory of Open Access Journals (Sweden)

    Mariângela F Silveira

    2002-12-01

    questionnaire that consisted of three sections: socioeconomic profile, interviewers' and self-administered questions. Data analysis was conducted using Epi-Info software, version 6.0. Statistical analysis was carried out using Kappa test and odds ratio. RESULTS: Of all women in the sample, 64% considered impossible or almost impossible for them to acquire an STD or AIDS. The main risk behaviors were non-use of condoms in their last intercourse (72%; onset of sexual activity before age 18 years (47%; drug or alcohol use by the partner (14% or the woman (7% before their last intercourse; two or more partners in the last three months (7%; and anal sex in the last intercourse (3%; 44% reported two or more risk behaviors. Using a risk score of two or more points as the gold standard, sensitivity and specificity of self-assessment were 41% and 67%, respectively. CONCLUSIONS: Self-assessment of vulnerability is not an adequate indicator of STD and AIDS vulnerability since women do not have an appropriate perception of their risks.

  2. Test results of HTTR control system

    International Nuclear Information System (INIS)

    Motegi, Toshihiro; Iigaki, Kazuhiko; Saito, Kenji; Sawahata, Hiroaki; Hirato, Yoji; Kondo, Makoto; Shibutani, Hideki; Ogawa, Satoru; Shinozaki, Masayuki; Mizushima, Toshihiko; Kawasaki, Kozo

    2006-06-01

    The plant control performance of the IHX helium flow rate control system, the PPWC helium flow rate control system, the secondary helium flow rate control system, the inlet temperature control system, the reactor power control system and the outlet temperature control system of the HTTR are obtained through function tests and power-up tests. As the test results, the control systems show stable control response under transient condition. Both of inlet temperature control system and reactor power control system shows stable operation from 30% to 100%, respectively. This report describes the outline of control systems and test results. (author)

  3. A treatment planning and delivery comparison of volumetric modulated arc therapy with or without flattening filter for gliomas, brain metastases, prostate, head/neck and early stage lung cancer

    DEFF Research Database (Denmark)

    Gasic, Daniel; Ohlhues, Lars; Brodin, N. Patrik

    2014-01-01

    generated using STD- and FFF-VMAT for both 6 MV and 10 MV, and were compared with respect to plan quality, monitor units and delivery time using Wilcoxon signed rank tests. RESULTS: For H&N and high-grade gliomas, there was a significant difference in homogeneity index in favor for STD-VMAT (p

  4. Vivências de mulheres com diagnóstico de doença sexualmente transmissível - DST Experiencias de Mujeres con Diagnóstico de Enfermedad Sexualmente Transmisible - ETS Women's Experiences with Sexually Transmitted Disease Diagnosis - STD

    Directory of Open Access Journals (Sweden)

    Maria Alix Leite Araújo

    2007-09-01

    relaciones con la pareja sexual. El acto de aconsejar desempeña papel fundamental para la reducción de estrese. Los servicios de salud deben valorar los aspectos emocionales relacionados al diagnóstico de ETS, visando contribuir para el mejoramiento de la calidad de vida de las mujeres y en el abordaje de la pareja.The sexually transmissible diseases (STD constitutes problem of public health, because of the high prevalence. For the women, the control is a challenge, because of the social implications and mainly of gender. This objective of this study was to know as the women feel the diagnosis of a STD and the repercussions of the revelation of this diagnosis to the sexual partner. Exploratory-descriptive study developed in a unit of reference health for STD in Fortaleza Ceará (Brazil. The collection of the data was accomplished the months of February and March in 2006 and the analyzed in two categories: women's experiences with STD diagnosis and the repercussion of the revelation of the STD diagnosis to the sexual partner. It was verified that the occurrence of other STD results a negative impact for the woman in a social relationship with a sexual partner. A word of advice is a fundamental work to reduce the stress. The services of health should valorize the emotional aspects related of the diagnosis other STD, with the vision to contribute with the improvement of the quality of the woman life and approach with the partner.

  5. Outcomes from a community-based, participatory lay health adviser HIV/STD prevention intervention for recently arrived immigrant Latino men in rural North Carolina.

    Science.gov (United States)

    Rhodes, Scott D; Hergenrather, Kenneth C; Bloom, Fred R; Leichliter, Jami S; Montaño, Jaime

    2009-10-01

    Latinos in the United States are at increased risk for HIV and sexually transmitted disease (STD) infection. We evaluated the efficacy of a pilot lay health adviser (LHA) intervention designed to increase condom use and HIV testing among Latino men. Fifteen LHAs (mean age = 35.6; range 23-60 years) from 15 Latino soccer teams were trained and worked with their teammates for 18 months. Another 15 teams served as the control group. Data were collected at baseline and at 18 months post-LHA training from a random sample of teammates from intervention and control teams. Data were collected from 222 men (mean age = 29 years) who participated in one of the 30 teams. Relative to the control condition, participants in the intervention reported more consistent condom use in the 30 days preceding follow-up (unadjusted analysis, intervention, 65.6% vs. control, 41.3%; p < .001). Participants in the intervention were more likely to report condom use (adjusted odds ratio [AOR] = 2.3; confidence interval [CI = 1.2-4.3) and HIV testing (AOR = 2.5; CI = 1.5-4.3). LHA interventions for Latino men that are developed in partnership with community members, rely on male-centered intrapersonal networks, and are culturally congruent can enhance preventive behaviors and may reduce HIV infection.

  6. Stability Test and Quantitative and Qualitative Analyses of the Amino Acids in Pharmacopuncture Extracted from Scolopendra subspinipes mutilans

    Science.gov (United States)

    Cho, GyeYoon; Han, KyuChul; Yoon, JinYoung

    2015-01-01

    Objectives: Scolopendra subspinipes mutilans (S. subspinipes mutilans) is known as a traditional medicine and includes various amino acids, peptides and proteins. The amino acids in the pharmacopuncture extracted from S. subspinipes mutilans by using derivatization methods were analyzed quantitatively and qualitatively by using high performance liquid chromatography (HPLC) over a 12 month period to confirm its stability. Methods: Amino acids of pharmacopuncture extracted from S. subspinipes mutilans were derived by using O-phthaldialdehyde (OPA) & 9-fluorenyl methoxy carbonyl chloride (FMOC) reagent and were analyzed using HPLC. The amino acids were detected by using a diode array detector (DAD) and a fluorescence detector (FLD) to compare a mixed amino acid standard (STD) to the pharmacopuncture from centipedes. The stability tests on the pharmacopuncture from centipedes were done using HPLC for three conditions: a room temperature test chamber, an acceleration test chamber, and a cold test chamber. Results: The pharmacopuncture from centipedes was prepared by using the method of the Korean Pharmacopuncture Institute (KPI) and through quantitative analyses was shown to contain 9 amino acids of the 16 amino acids in the mixed amino acid STD. The amounts of the amino acids in the pharmacopuncture from centipedes were 34.37 ppm of aspartate, 123.72 ppm of arginine, 170.63 ppm of alanine, 59.55 ppm of leucine and 57 ppm of lysine. The relative standard deviation (RSD %) results for the pharmacopuncture from centipedes had a maximum value of 14.95% and minimum value of 1.795% on the room temperature test chamber, the acceleration test chamber and the cold test chamber stability tests. Conclusion: Stability tests on and quantitative and qualitative analyses of the amino acids in the pharmacopuncture extracted from centipedes by using derivatization methods were performed by using HPLC. Through research, we hope to determine the relationship between time and the

  7. Mycoplasma genitalium compared to chlamydia, gonorrhoea and trichomonas as an aetiological agent of urethritis in men attending STD clinics.

    Science.gov (United States)

    Gaydos, C; Maldeis, N E; Hardick, A; Hardick, J; Quinn, T C

    2009-10-01

    To investigate prevalence of Mycoplasma genitalium, Chlamydia trachomatis, Neisseria gonorrhoeae and Trichomonas vaginalis in men, frequency of co-infections, and association of organisms with urethritis in men. This was a cross-sectional study of 290 men (age range 19-34 years) attending Baltimore City STD clinics. M genitalium, C trachomatis, N gonorrhoeae and T vaginalis, during 2004 were detected using nucleic acid amplification tests (NAATs) (153 with urethritis and 137 without urethritis). Demographic characteristics and risk factors were ascertained. The overall prevalences of infection with C trachomatis, N gonorrhoeae, T vaginalis and M genitalium were 20.3%, 12.8%, 3.4% and 15.2%, respectively. Prevalences in men with urethritis were 32.7%, 24.2%, 5.2% and 22.2% for C trachomatis, N gonorrhoeae, T vaginalis and M genitalium, respectively. Percentages of co-infections were high. All men with N gonorrhoeae had urethritis. C trachomatis and M genitalium were found to be significantly associated with urethritis in univariate analysis and in multiple logistic regression analysis. The association of M genitalium with urethritis in this study provides confirmation of the importance of screening men for M genitalium as a cause of non-gonococcal urethritis and supports treatment considerations for urethritis for agents other than gonococci and chlamydia.

  8. Environmental Assessment (EA): Proposed Missile Storage Improvements, Utah Test and Training Range

    Science.gov (United States)

    2013-06-11

    801) 451 -7872 Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39.18 Hill Air Force Base, Utah Final Environmental Assessment...motors were monitored to determine their functional capability when stored in prescribed temperatures varying between -65 degrees Fahrenheit to 200...degrees Fahrenheit . One of these structures (Building 30260) was used for cryogenic or deep-freeze testing. They were hardened structures meant to

  9. Engineering model cryocooler test results

    International Nuclear Information System (INIS)

    Skimko, M.A.; Stacy, W.D.; McCormick, J.A.

    1992-01-01

    This paper reports that recent testing of diaphragm-defined, Stirling-cycle machines and components has demonstrated cooling performance potential, validated the design code, and confirmed several critical operating characteristics. A breadboard cryocooler was rebuilt and tested from cryogenic to near-ambient cold end temperatures. There was a significant increase in capacity at cryogenic temperatures and the performance results compared will with code predictions at all temperatures. Further testing on a breadboard diaphragm compressor validated the calculated requirement for a minimum axial clearance between diaphragms and mating heads

  10. Irradiation Effects Test Series: Test IE-2. Test results report

    International Nuclear Information System (INIS)

    Allison, C.M.; Croucher, D.W.; Ploger, S.A.; Mehner, A.S.

    1977-08-01

    The report describes the results of a test using four 0.97-m long PWR-type fuel rods with differences in diametral gap and cladding irradiation. The objective of this test was to provide information about the effects of these differences on fuel rod behavior during quasi-equilibrium and film boiling operation. The fuel rods were subjected to a series of preconditioning power cycles of less than 30 kW/m. Rod powers were then increased to 68 kW/m at a coolant mass flux of 4900 kg/s-m 2 . After one hour at 68 kW/m, a power-cooling-mismatch sequence was initiated by a flow reduction at constant power. At a flow of 2550 kg/s-m 2 , the onset of film boiling occurred on one rod, Rod IE-011. An additional flow reduction to 2245 kg/s-m 2 caused the onset of film boiling on the remaining three rods. Data are presented on the behavior of fuel rods during quasiequilibrium and during film boiling operation. The effects of initial gap size, cladding irradiation, rod power cycling, a rapid power increase, and sustained film boiling are discussed. These discussions are based on measured test data, preliminary postirradiation examination results, and comparisons of results with FRAP-T3 computer model calculations

  11. Mildew growth on automotive coatings influencing the results of outdoor weathering

    Energy Technology Data Exchange (ETDEWEB)

    Wachtendorf, V.; Schulz, U.; Geburtig, A.; Stephan, I. [BAM Federal Institute for Materials Research and Testing, Berlin (Germany)

    2012-02-15

    As the results of a 14 weeks outdoor exposure of a series of automotive coatings in South Florida, the panels were found to be overgrown with an almost closed layer of mildew. Pinholes remained as permanent surface damage after removing the mildew mycelium. The extent of the damage differed in dependence of the kind of the coating. By tracing the images and profiles of the coating surfaces systematically over all phases of weathering and the subsequent cleaning procedure, a connection between formation of pinholes and mildew growth could be found. Outdoor weathering tests in other regions of Florida as well as in Europe and Australia showed that pinholes caused by mildew attack could also be found in all other locations, but always to a lower extent than in South Florida. The standardised mildew tests EN ISO 846 and MIL-STD 810F for laboratory exposure failed to reproduce the formation of pinholes. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  12. Summary of CCTF test results

    International Nuclear Information System (INIS)

    Iguchi, T.; Murao, Y.; Sugimoto, J.; Akimoto, H.; Okubo, T.; Hojo, T.

    1987-01-01

    Conservatism of current safety analysis was assessed by comparing the predicted result with cylindrical core test facility (CCTF) test result performed at Japan Atomic Energy Research Institute. WREM code was selected for the assessment. The overall conservatism of the WREM code on the peak clad temperature prediction was confirmed against CCTF evaluation model (EM) test which simulated the typical initial and boundary conditions in the safety evaluation analysis. WREM code predicted the reasonable core boundary conditions and the conservatism of the code came mainly from core calculation. The conservatism of the WREM code against CCTF data could be attributed to the following three points: (1) no horizontal mixing assumption between subchannels at each elevation; (2) no modeling on heat transfer enhancement caused by the radial core power profile; and (3) conservative heat transfer correlations in the code

  13. Posttraumatic stress disorder: Often missed in primary care.

    Science.gov (United States)

    Williams, Adrienne A

    2017-10-01

    DeSean W, a 47-year-old man, returned to his primary care clinic with a new complaint of epigastric burning that had been bothering him for the past 4 months. He had tried several over-the-counter remedies, which provided no relief. He also remained concerned--despite assurances to the contrary at previous clinic visits--that he had contracted a sexually-transmitted disease (STD) after going to a bar one night 4 to 5 months ago. At 2 other clinic visits since that time, STD test results were negative. At this current visit, symptoms and details of sexual history were unchanged since the last visit, with the exception of the epigastric pain. When asked if he thought he had contracted an STD through a sexual encounter the night he went to the bar, he emphatically said he would not cheat on his wife. Surprisingly, given his concern, he avoided further discussion on modes of contracting an STD. The physician prescribed ranitidine 150 mg bid for the epigastric burning and explained, once more, the significance of the STD test results. However, he also decided to further examine Mr. W's concern about STDs and the night he may have contracted one. HOW WOULD YOU PROCEED WITH THIS PATIENT?

  14. Climax granite test results

    Energy Technology Data Exchange (ETDEWEB)

    Ramspott, L.D.

    1980-01-15

    The Lawrence Livermore Laboratory (LLL), as part of the Nevada Nuclear Waste Storage Investigations (NNWSI) program, is carrying out in situ rock mechanics testing in the Climax granitic stock at the Nevada Test Site (NTS). This summary addresses only those field data taken to date that address thermomechanical modeling for a hard-rock repository. The results to be discussed include thermal measurements in a heater test that was conducted from October 1977 through July 1978, and stress and displacement measurements made during and after excavation of the canister storage drift for the Spent Fuel Test (SFT) in the Climax granite. Associated laboratory and field measurements are summarized. The rock temperature for a given applied heat load at a point in time and space can be adequately modeled with simple analytic calculations involving superposition and integration of numerous point source solutions. The input, for locations beyond about a meter from the source, can be a constant thermal conductivity and diffusivity. The value of thermal conductivity required to match the field data is as much as 25% different from laboratory-measured values. Therefore, unless we come to understand the mechanisms for this difference, a simple in situ test will be required to obtain a value for final repository design. Some sensitivity calculations have shown that the temperature field is about ten times more sensitive to conductivity than to diffusivity under the test conditions. The orthogonal array was designed to detect anisotropy. After considering all error sources, anisotropic efforts in the thermal field were less than 5 to 10%.

  15. Abnormal Cervical Cancer Screening Test Results

    Science.gov (United States)

    ... AQ FREQUENTLY ASKED QUESTIONS FAQ187 GYNECOLOGIC PROBLEMS Abnormal Cervical Cancer Screening Test Results • What is cervical cancer screening? • What causes abnormal cervical cancer screening test ...

  16. Irradiation Effects Test Series: Test IE-3. Test results report. [PWR

    Energy Technology Data Exchange (ETDEWEB)

    Farrar, L. C.; Allison, C. M.; Croucher, D. W.; Ploger, S. A.

    1977-10-01

    The objectives of the test reported were to: (a) determine the behavior of irradiated fuel rods subjected to a rapid power increase during which the possibility of a pellet-cladding mechanical interaction failure is enhanced and (b) determine the behavior of these fuel rods during film boiling following this rapid power increase. Test IE-3 used four 0.97-m long pressurized water reactor type fuel rods fabricated from previously irradiated fuel. The fuel rods were subjected to a preconditioning period, followed by a power ramp to 69 kW/m at a coolant mass flux of 4920 kg/s-m/sup 2/. After a flow reduction to 2120 kg/s-m/sup 2/, film boiling occurred on the fuel rods. One rod failed approximately 45 seconds after the reactor was shut down as a result of cladding embrittlement due to extensive cladding oxidation. Data are presented on the behavior of these irradiated fuel rods during steady-state operation, the power ramp, and film boiling operation. The effects of a power ramp and power ramp rates on pellet-cladding interaction are discussed. Test data are compared with FRAP-T3 computer model calculations and data from a previous Irradiation Effects test in which four irradiated fuel rods of a similar design were tested. Test IE-3 results indicate that the irradiated state of the fuel rods did not significantly affect fuel rod behavior during normal, abnormal (power ramp of 20 kW/m per minute), and accident (film boiling) conditions.

  17. National HIV Testing Day at CDC-funded HIV counseling, testing, and referral sites--United States, 1994-1998.

    Science.gov (United States)

    2000-06-23

    CDC-funded human immunodeficiency virus (HIV) counseling, testing, and referral sites are an integral part of national HIV prevention efforts (1). Voluntary counseling, testing, and referral opportunities are offered to persons at risk for HIV infection at approximately 11,000 sites, including dedicated HIV counseling and testing sites, sexually transmitted disease (STD) clinics, drug-treatment centers, hospitals, and prisons. Services also are offered to women in family planning and prenatal/obstetric clinics to increase HIV prevention efforts among women and decrease the risk for perinatal HIV transmission. To increase use of HIV counseling, testing, and referral services by those at risk for HIV infection, in 1995, the National Association of People with AIDS designated June 27 each year as National HIV Testing Day. This report compares use of CDC-funded counseling, testing, and referral services the week before and the week of June 27 from 1994 through 1998 and documents the importance of a national public health campaign designed to increase knowledge of HIV serostatus.

  18. ST segment elevation in lead aVR during exercise testing is associated with LAD stenosis

    International Nuclear Information System (INIS)

    Neill, Johanne; Harbinson, Mark; Shannon, Heather J.; Morton, Amanda; Muir, Alison R.; Adgey, Jennifer A.

    2007-01-01

    To evaluate, in patients with chest pain, the diagnostic value of ST elevation (STE) in lead aVR during stress testing prior to 99m Tc-sestamibi scanning correlating ischaemic territory with angiographic findings. Consecutive patients attending for 99m Tc-sestamibi myocardial perfusion imaging (MPI) completed a treadmill protocol. Peak exercise ECGs were coded. STE ≥0.05 mV in lead aVR was considered significant. Gated perfusion images and findings at angiography were assessed. STE in lead aVR occurred in 25% (138/557) of the patients. More patients with STE in aVR had a reversible defect on imaging compared with those who had no STE in aVR (41%, 56/138 vs 27%, 114/419, p=0.003). Defects indicating a left anterior descending artery (LAD) culprit lesion were more common in the STE in aVR group (20%, 27/138 vs 9%, 39/419, p=0.001). There was a trend towards coronary artery stenosis (>70%) in a double vessel distribution involving the LAD in those patients who had STE in aVR compared with those who did not (22%, 8/37 vs 5%, 4/77, p=0.06). Logistic regression analysis demonstrated that STE in aVR (OR 1.36, p=0.233) is not an independent predictor of inducible abnormality when adjusted for STD >0.1 mV (OR 1.69, p=0.026). However, using anterior wall defect as an end-point, STE in aVR (OR 2.77, p=0.008) was a predictor even after adjustment for STD (OR 1.43, p=0.281). STE in lead aVR during exercise does not diagnose more inducible abnormalities than STD alone. However, unlike STD, which is not predictive of a territory of ischaemia, STE in aVR may indicate an anterior wall defect. (orig.)

  19. What qualities are most important to making a point of care test desirable for clinicians and others offering sexually transmitted infection testing?

    Directory of Open Access Journals (Sweden)

    Yu-Hsiang Hsieh

    2011-04-01

    Full Text Available To investigate the possible effects of different levels of attributes of a point-of-care test (POCT on sexually transmitted infection (STI professionals' decisions regarding an ideal POCT for STI(s.An online survey was designed based on a large-scale in-depth focus discussion study among STI experts and professionals. The last section of the survey "build your own POCT" was designed by employing the discrete choice experiment approach. Practicing clinicians from two venues, STI-related international conference attendees and U.S. STD clinic clinicians were invited to participate in the survey. Conditional logistical regression modeling was used for data analysis.Overall, 256 subjects took the online survey with 218 (85% completing it. Most of the participants were STD clinic clinicians who already used some POCTs in their practice. "The time frame required" was identified as a major barrier that currently made it difficult to use STI POCTs. Chlamydia trachomatis was the organism chosen as the top priority for a new POCT, followed by a test that would diagnose early seroconversion for HIV, and a syphilis POCT. Without regard to organism type selected, sensitivity of 90-99% was always the most important attribute to be considered, followed by a cost of $20. However, when the test platform was prioritized for early HIV seroconversion or syphilis, sensitivity was still ranked as most important, but specificity was rated second most important.STI professionals preferred C. trachomatis as the top priority for a new POCT with sensitivity over 90%, low cost, and a very short completion time.

  20. BWR Full Integral Simulation Test (FIST). Phase I test results

    International Nuclear Information System (INIS)

    Hwang, W.S.; Alamgir, M.; Sutherland, W.A.

    1984-09-01

    A new full height BWR system simulator has been built under the Full-Integral-Simulation-Test (FIST) program to investigate the system responses to various transients. The test program consists of two test phases. This report provides a summary, discussions, highlights and conclusions of the FIST Phase I tests. Eight matrix tests were conducted in the FIST Phase I. These tests have investigated the large break, small break and steamline break LOCA's, as well as natural circulation and power transients. Results and governing phenomena of each test have been evaluated and discussed in detail in this report. One of the FIST program objectives is to assess the TRAC code by comparisons with test data. Two pretest predictions made with TRACB02 are presented and compared with test data in this report

  1. Results of steel containment vessel model test

    International Nuclear Information System (INIS)

    Luk, V.K.; Ludwigsen, J.S.; Hessheimer, M.F.; Komine, Kuniaki; Matsumoto, Tomoyuki; Costello, J.F.

    1998-05-01

    A series of static overpressurization tests of scale models of nuclear containment structures is being conducted by Sandia National Laboratories for the Nuclear Power Engineering Corporation of Japan and the US Nuclear Regulatory Commission. Two tests are being conducted: (1) a test of a model of a steel containment vessel (SCV) and (2) a test of a model of a prestressed concrete containment vessel (PCCV). This paper summarizes the conduct of the high pressure pneumatic test of the SCV model and the results of that test. Results of this test are summarized and are compared with pretest predictions performed by the sponsoring organizations and others who participated in a blind pretest prediction effort. Questions raised by this comparison are identified and plans for posttest analysis are discussed

  2. Superconducting solenoid model magnet test results

    International Nuclear Information System (INIS)

    Carcagno, R.; Dimarco, J.; Feher, S.; Ginsburg, C.M.; Hess, C.; Kashikhin, V.V.; Orris, D.F.; Pischalnikov, Y.; Sylvester, C.; Tartaglia, M.A.; Terechkine, I.; Tompkins, J.C.; Wokas, T.; Fermilab

    2006-01-01

    Superconducting solenoid magnets suitable for the room temperature front end of the Fermilab High Intensity Neutrino Source (formerly known as Proton Driver), an 8 GeV superconducting H- linac, have been designed and fabricated at Fermilab, and tested in the Fermilab Magnet Test Facility. We report here results of studies on the first model magnets in this program, including the mechanical properties during fabrication and testing in liquid helium at 4.2 K, quench performance, and magnetic field measurements. We also describe new test facility systems and instrumentation that have been developed to accomplish these tests

  3. Superconducting solenoid model magnet test results

    Energy Technology Data Exchange (ETDEWEB)

    Carcagno, R.; Dimarco, J.; Feher, S.; Ginsburg, C.M.; Hess, C.; Kashikhin, V.V.; Orris, D.F.; Pischalnikov, Y.; Sylvester, C.; Tartaglia, M.A.; Terechkine, I.; /Fermilab

    2006-08-01

    Superconducting solenoid magnets suitable for the room temperature front end of the Fermilab High Intensity Neutrino Source (formerly known as Proton Driver), an 8 GeV superconducting H- linac, have been designed and fabricated at Fermilab, and tested in the Fermilab Magnet Test Facility. We report here results of studies on the first model magnets in this program, including the mechanical properties during fabrication and testing in liquid helium at 4.2 K, quench performance, and magnetic field measurements. We also describe new test facility systems and instrumentation that have been developed to accomplish these tests.

  4. A Network Analysis of Sexually Transmitted Diseases and Online Hookup Sites Among Men Who Have Sex With Men.

    Science.gov (United States)

    Chan, Philip A; Crowley, Christina; Rose, Jennifer S; Kershaw, Trace; Tributino, Alec; Montgomery, Madeline C; Almonte, Alexi; Raifman, Julia; Patel, Rupa; Nunn, Amy

    2018-07-01

    Sexually transmitted diseases (STDs) are increasing among gay, bisexual, and other men who have sex with men (MSM). Little is known about the use of websites and mobile phone applications to meet sexual partners ("hookup sites") and association with STD diagnoses. We performed a demographic and behavioral assessment of 415 MSM presenting to the Rhode Island STD clinic. Bivariate and multivariable analyses assessed associations between using hookup sites and testing positive for syphilis, gonorrhea, or chlamydia. Venue-based affiliation networks were created to evaluate hookup sites and their association with STD diagnoses. Among 415 MSM, 78% reported meeting a partner online in the last 12 months, and 25% tested positive for at least one STD. Men who met partners online were more likely to be white (67% vs. 54%, P = 0.03) and have more than 10 lifetime partners (87% vs. 58%, P Tinder (22%). In the multivariable analysis, only Scruff use was associated with testing positive for an STD (odds ratio, 2.28; 95% confidence interval, 1.09-4.94). However, among men who met partners online, 75% of men diagnosed as having an STD had met a sexual partner on Grindr, including 100% of those who were diagnosed as having gonorrhea. Use of hookup sites was nearly ubiquitous among MSM undergoing STD screening. Specific hookup sites were significantly associated with STD diagnoses among MSM. Greater efforts are needed to promote STD screening and prevention among MSM who meet partners online.

  5. Radioisotope Thermoelectric Generator Transporation System licensed hardware second certification test series and package shock mount system test

    International Nuclear Information System (INIS)

    Ferrell, P.C.; Moody, D.A.

    1995-10-01

    This paper presents a summary of two separate drop test a e performed in support of the Radioisotope Thermoelectric Generator (RTG) Transportation System (RTGTS). The first portion of this paper presents the second series of drop testing required to demonstrate that the RTG package design meets the requirements of Title 10, Code of Federal Regulations, ''Part 71'' (10 CFR 71). Results of the first test series, performed in July 1994, demonstrated that some design changes were necessary. The package design was modified to improve test performance and the design changes were incorporated into the Safety Analysis Report for Packaging (SARP). The second full-size certification test article (CTA-2) incorporated the modified design and was tested at the US Department of Energy's (DOE) Hanford Site near Richland, Washington. With the successful completion of the test series, and pending DOE Office of Facility Safety Analysis approval of the SARP, a certificate of compliance will be issued for the RTG package allowing its use. The second portion of this paper presents the design and testing of the RTG Package Mount System. The RTG package mount was designed to protect the RTG from excessive vibration during transport, provide shock protection during on/off loading, and provide a mechanism for moving the RTG package with a forklift. Military Standard (MIL-STD) 810E, Transit Drop Procedure (DOE 1989), was used to verify that the shock limiting system limited accelerations in excess of 15 G's at frequencies below 150 Hz. Results of the package mount drop tests indicate that an impact force of 15 G's was not exceeded in any test from a free drop height of 457 mm (18 in.)

  6. IEEE Std 649-1980: IEEE standard for qualifying Class 1E motor control centers for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This standard describes the basic principles, requirements, and methods for qualifying Class 1E motor control centers for outside containment applications in nuclear power generating stations. Qualification of motor control centers located inside containment in a nuclear power generating station is beyond the scope of this standard. The purpose of this standard is (1) to define specific qualification requirements for Class 1E motor control centers in accordance with the more general qualification requirements of IEEE Std 323-1974, IEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations; (2) to provide guidance in establishing a qualification program for demonstrating the design adequacy of Class 1E motor control centers in nuclear power generating station applications

  7. Legal provisions governing the acknowledgment of test results

    International Nuclear Information System (INIS)

    Strecker, A.

    1982-01-01

    The legal provisions governing the acknowledgment of test results are most frequently applied by administrative orders (design and qualification approvals or specimen testing and approval) and are thus claimable and voidable in accordance with general administrative law. The acknowledgment of test certificates requires a legal basis. Test results, however, can be acknowledged also by administrative bodies. Recently, the Federal Government began to delegate more of its legal authority in this field to private institutions, allowing test results to be acknowledged and test certificates to be issued by government controlled private institutions. (orig.) [de

  8. Review of Literature on Probability of Detection for Magnetic Particle Nondestructive Testing

    Science.gov (United States)

    2013-01-01

    a precipitation hardened martensitic stainless steel . The inspections were based on MIL-STD-1949A [51], now superseded but current at the time...inspector population involved in the tests, it is not possible to draw any further conclusions.  MPT of flat 17-4PH stainless steel plates. A brief...inspection method used to detect surface-breaking cracks in high-strength steel components. A survey of the available literature on the reliability

  9. Relationship between ultrasonic pulse velocity test result and ...

    African Journals Online (AJOL)

    Ultrasonic Pulse Velocity test result showed an inverse relationship (of -0.935) with the crushed concrete compressive strength. Correlation test, multiple regression analysis, graphs and visual inspection were used to analyze the results. The conclusion drawn is that there exists a relationship between UPV test results and ...

  10. Mathematics Placement Test: Typical Results with Unexpected Outcomes

    Science.gov (United States)

    Ingalls, Victoria

    2011-01-01

    Based on the results of a prior case-study analysis of mathematics placement at one university, the mathematics department developed and piloted a mathematics placement test. This article describes the implementation process for a mathematics placement test and further analyzes the test results for the pilot group. As an unexpected result, the…

  11. Test Results of PBMR Fuel Spheres

    International Nuclear Information System (INIS)

    Koshcheev, Konstantin; Diakov, Alexander; Beltyukov, Igor; Barybin, Andrey; Chernetsov, Mikhail

    2014-01-01

    Results of pre-irradiation testing of fuel spheres (FS) and coated particles (CP) manufactured by PBMR SOC (Republic of South Africa) are described. The stable high quality level of major characteristics (dimensions, CP coating structure, uranium-235 contamination of the FS matrix graphite and the outer PyC layer of the CP coating) are shown. Results of a methodical irradiation test of two FS in helium and neon medium at temperatures of 800 to 1300 °C with simultaneous determination of release-to-birth ratios for major gaseous fission products (GFP) are described. (author)

  12. Results of interlaboratory tests regarding TXRF

    International Nuclear Information System (INIS)

    Klockenkaemper, R.; Bohlen, A. von

    2000-01-01

    Interlaboratory or intercomparison tests can be performed for proficiency testing of individual laboratories, for the certification of a special sample material and for the validation of a certain method. We participated in two interlaboratory tests in order to validate total reflection x-ray fluorescence analysis (TXRF). We used our results to evaluate TXRF and to compare it with other competing methods, particularly with respect of precision and accuracy. The first interlaboratory test was organized by IAEA (International Atomic Energy Agency, Vienna, Austria). As a candidate for reference material, a lichen (IAEA-336 Lichen) was distributed among 27 participants. In our laboratory, the powdered biogenic material was digested with nitric acid under high pressure and analyzed by TXRF. - The second interlaboratory test was organized by IRMM (Institute for Reference Materials and Measurements, Geel, Belgium). As a certified test sample with undisclosed values, a sediment (IMEP-14) was delivered to 220 laboratories. We digested the geogenic material again by nitric acid and additionally by hydrofluoric acid and analyzed it by TXRF. - In both test samples, six or eight different trace elements, respectively, were determined by TXRF with a content between 2 and 2000 mg/kg. Calibration was carried out by internal standardization. For that purpose, Ga or Se, respectively, was added as standard element. The measurement uncertainty of TXRF was estimated by the method of error propagation. In our paper we will report on the results of the two interlaboratory tests. It will be shown that TXRF is highly reliable for a correct determination of trace elements in biogenic and geogenic samples. It is competitive with the established methods of trace analyses which were involved in these tests and it is even superior to them in certain aspects. (author)

  13. Mobile evaporator corrosion test results

    International Nuclear Information System (INIS)

    Rozeveld, A.; Chamberlain, D.B.

    1997-05-01

    Laboratory corrosion tests were conducted on eight candidates to select a durable and cost-effective alloy for use in mobile evaporators to process radioactive waste solutions. Based on an extensive literature survey of corrosion data, three stainless steel alloys (304L, 316L, AL-6XN), four nickel-based alloys (825, 625, 690, G-30), and titanium were selected for testing. The corrosion tests included vapor phase, liquid junction (interface), liquid immersion, and crevice corrosion tests on plain and welded samples of candidate materials. Tests were conducted at 80 degrees C for 45 days in two different test solutions: a nitric acid solution. to simulate evaporator conditions during the processing of the cesium ion-exchange eluant and a highly alkaline sodium hydroxide solution to simulate the composition of Tank 241-AW-101 during evaporation. All of the alloys exhibited excellent corrosion resistance in the alkaline test solution. Corrosion rates were very low and localized corrosion was not observed. Results from the nitric acid tests showed that only 316L stainless steel did not meet our performance criteria. The 316L welded interface and crevice specimens had rates of 22.2 mpy and 21.8 mpy, respectively, which exceeds the maximum corrosion rate of 20 mpy. The other welded samples had about the same corrosion resistance as the plain samples. None of the welded samples showed preferential weld or heat-affected zone (HAZ) attack. Vapor corrosion was negligible for all alloys. All of the alloys except 316L exhibited either open-quotes satisfactoryclose quotes (2-20 mpy) or open-quotes excellentclose quotes (<2 mpy) corrosion resistance as defined by National Association of Corrosion Engineers. However, many of the alloys experienced intergranular corrosion in the nitric acid test solution, which could indicate a susceptibility to stress corrosion cracking (SCC) in this environment

  14. New HIV Testing Algorithm: Promising Tool in the Fight Against HIV

    Centers for Disease Control (CDC) Podcasts

    2016-09-21

    In this podcast, CDC’s Dr. Phil Peters discusses the new HIV testing algorithm and how this latest technology can improve the diagnosis of acute HIV infection. Early detection of HIV is critical to saving lives, getting patients into treatment, and preventing transmission.  Created: 9/21/2016 by National Center for HIV/AIDS, Viral Hepatitis, STD and TB Prevention (NCHHSTP), • Division of HIV/AIDS Prevention (DHAP).   Date Released: 9/21/2016.

  15. Reproducibility of the results in ultrasonic testing

    International Nuclear Information System (INIS)

    Chalaye, M.; Launay, J.P.; Thomas, A.

    1980-12-01

    This memorandum reports on the conclusions of the tests carried out in order to evaluate the reproducibility of ultrasonic tests made on welded joints. FRAMATOME have started a study to assess the dispersion of results afforded by the test line and to characterize its behaviour. The tests covered sensors and ultrasonic generators said to be identical to each other (same commercial batch) [fr

  16. Acknowledging the results of blood tests

    DEFF Research Database (Denmark)

    Torkilsheyggi, Arnvør Martinsdottir á; Hertzum, Morten

    At the studied hospital, physicians from the Medical and Surgical Departments work some of their shifts in the Emergency Department (ED). Though icons showing the blood-test process were introduced on electronic whiteboards in the ED, these icons did not lead to increased attention to test acknow...... acknowledgement. Rather, the physicians, trans-ferred work practices from their own departments, which did not have electronic white-boards, to the ED. This finding suggests a challenge to the cross-disciplinary work and norms for how to follow up on blood-test results in the ED....

  17. Syphilis and MSM (Men Who Have Sex with Men)

    Science.gov (United States)

    ... STDs & Pregnancy Syphilis Trichomoniasis Other STDs See Also Pregnancy HIV / AIDS Find an STD testing site near you. ... STDs & Pregnancy Syphilis Trichomoniasis Other STDs See Also Pregnancy HIV / AIDS Find an STD testing site near you. ...

  18. Trichomoniasis Statistics

    Science.gov (United States)

    ... STDs & Pregnancy Syphilis Trichomoniasis Other STDs See Also Pregnancy HIV / AIDS Find an STD testing site near you. ... STDs & Pregnancy Syphilis Trichomoniasis Other STDs See Also Pregnancy HIV / AIDS Find an STD testing site near you. ...

  19. Phase III Simplified Integrated Test (SIT) results - Space Station ECLSS testing

    Science.gov (United States)

    Roberts, Barry C.; Carrasquillo, Robyn L.; Dubiel, Melissa Y.; Ogle, Kathryn Y.; Perry, Jay L.; Whitley, Ken M.

    1990-01-01

    During 1989, phase III testing of Space Station Freedom Environmental Control and Life Support Systems (ECLSS) began at Marshall Space Flight Center (MSFC) with the Simplified Integrated Test. This test, conducted at the MSFC Core Module Integration Facility (CMIF), was the first time the four baseline air revitalization subsystems were integrated together. This paper details the results and lessons learned from the phase III SIT. Future plans for testing at the MSFC CMIF are also discussed.

  20. 'False-positive' and 'false-negative' test results in clinical urine drug testing.

    Science.gov (United States)

    Reisfield, Gary M; Goldberger, Bruce A; Bertholf, Roger L

    2009-08-01

    The terms 'false-positive' and 'false-negative' are widely used in discussions of urine drug test (UDT) results. These terms are inadequate because they are used in different ways by physicians and laboratory professionals and they are too narrow to encompass the larger universe of potentially misleading, inappropriate and unexpected drug test results. This larger universe, while not solely comprised of technically 'true' or 'false' positive or negative test results, presents comparable interpretive challenges with corresponding clinical implications. In this review, we propose the terms 'potentially inappropriate' positive or negative test results in reference to UDT results that are ambiguous or unexpected and subject to misinterpretation. Causes of potentially inappropriate positive UDT results include in vivo metabolic conversions of a drug, exposure to nonillicit sources of a drug and laboratory error. Causes of potentially inappropriate negative UDT results include limited assay specificity, absence of drug in the urine, presence of drug in the urine, but below established assay cutoff, specimen manipulation and laboratory error. Clinical UDT interpretation is a complicated task requiring knowledge of recent prescription, over-the-counter and herbal drug administration, drug metabolism and analytical sensitivities and specificities.

  1. Continuing Need for Sexually Transmitted Disease Clinics After the Affordable Care Act.

    Science.gov (United States)

    Hoover, Karen W; Parsell, Bradley W; Leichliter, Jami S; Habel, Melissa A; Tao, Guoyu; Pearson, William S; Gift, Thomas L

    2015-11-01

    We assessed the characteristics of sexually transmitted disease (STD) clinic patients, their reasons for seeking health services in STD clinics, and their access to health care in other venues. In 2013, we surveyed persons who used publicly funded STD clinics in 21 US cities with the highest STD morbidity. Of the 4364 STD clinic patients we surveyed, 58.5% were younger than 30 years, 72.5% were non-White, and 49.9% were uninsured. They visited the clinic for STD symptoms (18.9%), STD screening (33.8%), and HIV testing (13.6%). Patients chose STD clinics because of walk-in, same-day appointments (49.5%), low cost (23.9%), and expert care (8.3%). Among STD clinic patients, 60.4% had access to another type of venue for sick care, and 58.5% had access to another type of venue for preventive care. Most insured patients (51.6%) were willing to use insurance to pay for care at the STD clinic. Despite access to other health care settings, patients chose STD clinics for sexual health care because of convenient, low-cost, and expert care. Policy Implication. STD clinics play an important role in STD prevention by offering walk-in care to uninsured patients.

  2. Selenide isotope generator for the Galileo Mission: SIG/Galileo hermetic receptable test program final report

    International Nuclear Information System (INIS)

    Roedel, S.

    1979-06-01

    The purpose of the receptacle test program was to test various types of hermetically sealed electrical receptacles and to select one model as the spaceflight hardware item for SIG/Galileo thermoelectric generators. The design goal of the program was to qualify a hermetic seal integrity of less than or equal to 1 x 10 -9 std cc He/sec -atm at 400 0 F (204 0 C) and verify a reliability of 0.95 at a 50% confidence level for a flight mission in excess of 7 years

  3. Registratie van SOA en HIV consulten bij GGD's en SOA-poliklinieken: Jaarverslag 2000

    NARCIS (Netherlands)

    Laar MJW van de; Haks K; Coenen AJJ; CIE

    2001-01-01

    Public health nurses at the municipal health services keep a register of patients attending the MHS or STD clinic for diagnosis and treatment of STD or request for HIV-testing. Data are collected at a national level and are only registered for an actual STD or HIV consultation with confirmed

  4. Aquila Remotely Piloted Vehicle System Technology Demonstration (RPV-STD) Program. Volume 3. Field Test Program

    Science.gov (United States)

    1979-04-01

    FLIGHT TESTS Tis 8ootion sumarizes ech of the Crows Landln Flight Tests, hrm I to It Deoemiber 1975. 23 2.4.1 Flight 1 Aquila RPV 001 took off at 09.42...RC pilot In the stablied RC mode. To facilitate theme attempts, an automobile , with Its headlights on high beam, was positioned on each side of the...the vans. At approxi- mately 2 to 3 km, the actual automobile headlights would become visible. Then, the operator would attempt to reposition the RPV

  5. EFTF cobalt test assembly results

    International Nuclear Information System (INIS)

    Rawlins, J.A.; Wootan, D.W.; Carter, L.L.; Brager, H.R.; Schenter, R.E.

    1988-01-01

    A cobalt test assembly containing yttrium hydride pins for neutron moderation was irradiated in the Fast Flux Test Facility during Cycle 9A for 137.7 equivalent full power days at a power level fo 291 MW. The 36 test pins consisted of a batch of 32 pins containing cobalt metal to produce Co-60, and a set of 4 pins with europium oxide to produce Gd-153, a radioisotope used in detection of the bone disease Osteoporosis. Post-irradiation examination of the cobalt pins determined the Co-60 produced with an accuracy of about 5 %. The measured Co-60 spatially distributed concentrations were within 20 % of the calculated concentrations. The assembly average Co-60 measured activity was 4 % less than the calculated value. The europium oxide pins were gamma scanned for the europium isotopes Eu-152 and Eu-154 to an absolute accuracy of about 10 %. The measured europium radioisotpe anc Gd-153 concentrations were within 20 % of calculated values. In conclusion, the hydride assembly performed well and is an excellent vehicle for many Fast Flux Test Facility isotope production applications. The results also demonstrate that the calculational methods developed by the Westinghouse Hanford Company are very accurate. (author)

  6. Evaluating the RELM Test Results

    Directory of Open Access Journals (Sweden)

    Michael K. Sachs

    2012-01-01

    Full Text Available We consider implications of the Regional Earthquake Likelihood Models (RELM test results with regard to earthquake forecasting. Prospective forecasts were solicited for M≥4.95 earthquakes in California during the period 2006–2010. During this period 31 earthquakes occurred in the test region with M≥4.95. We consider five forecasts that were submitted for the test. We compare the forecasts utilizing forecast verification methodology developed in the atmospheric sciences, specifically for tornadoes. We utilize a “skill score” based on the forecast scores λfi of occurrence of the test earthquakes. A perfect forecast would have λfi=1, and a random (no skill forecast would have λfi=2.86×10-3. The best forecasts (largest value of λfi for the 31 earthquakes had values of λfi=1.24×10-1 to λfi=5.49×10-3. The best mean forecast for all earthquakes was λ̅f=2.84×10-2. The best forecasts are about an order of magnitude better than random forecasts. We discuss the earthquakes, the forecasts, and alternative methods of evaluation of the performance of RELM forecasts. We also discuss the relative merits of alarm-based versus probability-based forecasts.

  7. Estimating inventory thresholds for nuclear facilities using DOE STD-1027-92 Attachment 1 Table A.1 ''Thresholds for Radionuclides''

    International Nuclear Information System (INIS)

    Price, D.; Hildum, J.S.; Williams, A.C.

    1997-01-01

    It has recently been reports that Table A.1 of Attachment 1 of DOE STD-1027-92 is being improperly used to determine the Category 3 inventory threshold values for non-reactor nuclear facilities. The concern of this paper is that Safety Analysts and Facility Managers at the Lawrence Livermore National Laboratory (LLNL), as well as at other locations in the DOE Complex, are improperly using the entries in Table A.1. It is noted at this point that the common use of this table is to establish the lower thresholds for both Categories 2 and 3 non-reactor nuclear facilities by considering inventory quantities, as opposed to a postulated accident scenario. This paper will provide insight regarding this error and will show that the error is most likely non-conservative in nature

  8. Temperature profile data from STD/CTD casts from the MOANA WAVE from the Pacific Ocean during the International Decade of Ocean Exploration / North Pacific Experiment (IDOE/NORPAX) project, 22 February to 1975-05-27 (NODC Accession 7800703)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature and salinity profile data were collected using STD/CTD casts from MOANA WAVE in the Pacific Ocean from February 22, 1975 to May 27, 1975. Data were...

  9. Analysis of SCTF/CCTF counterpart test results

    International Nuclear Information System (INIS)

    Okubo, Tsutomu; Sobajima, Makoto; Iwamura, Takamichi; Ohnuki, Akira; Abe, Yutaka; Adachi, Hiromichi; Murao, Yoshio

    1990-06-01

    Slab Core Test Facility (SCTF) and Cylindrical Core Test Facility (CCTF) are large scale experimental facilities of Japan Atomic Energy Research Institute (JAERI) for the investigation of reflooding behavior during a postulated loss-of-coolant accident (LOCA) in PWRs. Although the flow area scaling ratios of both facilities to a 1,000 MWe class PWR are the same and 1/21.4, the SCTF has the same core width as the radius of the reference PWR while the CCTF has a 1/4.5 times shorter core radius. Therefore, a few SCTF/CCTF counterpart tests were conducted in order to investigate the difference in core reflooding behavior between in the SCTF and CCTF tests as well as the effect of core radial length on core two-dimensional thermo-hydrodynamic behavior. This report present the test results and an analysis on them. Major results obtained are: (1) Taking account of the differences in test conditions and facility design, core reflooding behavior is considered to be similar between the SCTF and the CCTF test. Main difference of the facility design is in the effective core flow area and this is considered to result in the difference in core water accumulation behavior. (2) The effect of core radial length on core two-dimensional thermo-hydrodynamic behavior has been observed to be significant and heat transfer enhancement or degradation in radial direction is more significant for the longer radius core. (3) In addition, where the core power varies significantly in the radial direction, significant heat transfer enhancement has been observed in the higher power bundle during the LPCI period. Also, in the peripheral region, heat transfer degradation has been observed more significantly in the outer bundle even they have the same bundle power. (4) Magnitude of these heat transfer enhancement or degradation was larger at the higher elevation than the midplane level in the SCTF test, whereas smaller in the CCTF test. (author)

  10. The PANDA facility and first test results

    International Nuclear Information System (INIS)

    Dreier, J.; Huggenberger, M.; Aubert, C.; Bandurski, T.; Fischer, O.; Healzer, J.; Lomperski, S.; Strassberger, H.J.; Varadi, G.; Yadigaroglu, G.

    1996-01-01

    The PANDA test facility at the Paul Scherrer Institute is used to study the long-term performance of the Simplified Boiling Water Reactor's passive containment cooling system. The PANDA tests demonstrate performance on a larger scale than previous tests and examine the effects of any non-uniform spatial distributions of steam and non-condensable gases in the system. The facility is in 1:1 vertical scale and 1:25 scale for volume, power etc. Extensive facility characterization tests and steady-state passive containment condenser performance tests are presented. The results of the base case test of a series of transient system behaviour tests are reviewed. The first PANDA tests exhibited reproducibility, and indicated that the Simplified Boiling Water Reactor's containment is likely to be favorably responsive and highly robust to changes in the thermal transport patterns. (orig.) [de

  11. Temperature profile data from STD/CTD casts from the MELVILLE from the Indian Ocean for the International Decade of Ocean Exploration / Geochemical Ocean Section Study (IDOE/GEOSECS) project, 06 December 1977 to 21 April 1978 (NODC Accession 8200055)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature and salinity profile data were collected using STD/CTD casts from MELVILLE from the Indian Ocean from December 6, 1977 to April 21, 1978. Data were...

  12. Small-Scale Spray Releases: Initial Aerosol Test Results

    Energy Technology Data Exchange (ETDEWEB)

    Mahoney, Lenna A.; Gauglitz, Phillip A.; Kimura, Marcia L.; Brown, Garrett N.; Kurath, Dean E.; Buchmiller, William C.; Smith, Dennese M.; Blanchard, Jeremy; Song, Chen; Daniel, Richard C.; Wells, Beric E.; Tran, Diana N.; Burns, Carolyn A.

    2013-05-29

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and across processing facilities in the DOE complex. Two key technical areas were identified where testing results were needed to improve the technical basis by reducing the uncertainty due to extrapolating existing literature results. The first technical need was to quantify the role of slurry particles in small breaches where the slurry particles may plug and result in substantially reduced, or even negligible, respirable fraction formed by high-pressure sprays. The second technical need was to determine the aerosol droplet size distribution and volume from prototypic breaches and fluids, specifically including sprays from larger breaches with slurries where data from the literature are scarce. To address these technical areas, small- and large-scale test stands were constructed and operated with simulants to determine aerosol release fractions and net generation rates from a range of breach sizes and geometries. The properties of the simulants represented the range of properties expected in the WTP process streams and included water, sodium salt solutions, slurries containing boehmite or gibbsite, and a hazardous chemical simulant. The effect of antifoam agents was assessed with most of the simulants. Orifices included round holes and

  13. Men’s Perception of Raped Women: Test of the Sexually Transmitted Disease Hypothesis and the Cuckoldry Hypothesis

    Directory of Open Access Journals (Sweden)

    Prokop Pavol

    2016-06-01

    Full Text Available Rape is a recurrent adaptive problem of female humans and females of a number of non-human animals. Rape has various physiological and reproductive costs to the victim. The costs of rape are furthermore exaggerated by social rejection and blaming of a victim, particularly by men. The negative perception of raped women by men has received little attention from an evolutionary perspective. Across two independent studies, we investigated whether the risk of sexually transmitted diseases (the STD hypothesis, Hypothesis 1 or paternity uncertainty (the cuckoldry hypothesis, Hypothesis 2 influence the negative perception of raped women by men. Raped women received lower attractiveness score than non-raped women, especially in long-term mate attractiveness score. The perceived attractiveness of raped women was not influenced by the presence of experimentally manipulated STD cues on faces of putative rapists. Women raped by three men received lower attractiveness score than women raped by one man. These results provide stronger support for the cuckoldry hypothesis (Hypothesis 2 than for the STD hypothesis (Hypothesis 1. Single men perceived raped women as more attractive than men in a committed relationship (Hypothesis 3, suggesting that the mating opportunities mediate men’s perception of victims of rape. Overall, our results suggest that the risk of cuckoldry underlie the negative perception of victims of rape by men rather than the fear of disease transmission.

  14. Temperature profile data from STD/CTD casts from the KNORR from a world-wide distribution during the International Decade of Ocean Exploration / Geochemical Ocean Section Study (IDOE/GEOSECS) project, 24 July 1972 - 09 June 1974 (NODC Accession 8200010)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature and salinity profile data were collected using STD/CTD casts from KNORR in a world-wide distribution from July 24, 1972 to June 9, 1974. Data were...

  15. SULTAN test facility: Summary of recent results

    International Nuclear Information System (INIS)

    Stepanov, Boris; Bruzzone, Pierluigi; Sedlak, Kamil; Croari, Giancarlo

    2013-01-01

    The test campaigns of the ITER conductors in the SULTAN test facility re-started in December 2011 after three months break. The main focus of the activities is about the qualification tests of the Central Solenoid (CS) conductors, with three different samples for a total six variations of strand suppliers and cable layouts. In 2012, five Toroidal Field (TF) conductor samples have also been tested as part of the supplier and process qualification phase of the European, Korean, Chinese and Russian Federation Agencies. A summary of the test results for all the ITER samples tested in the last period is presented, including an updated statistics of the broad transition, the performance degradation and the impact of layout variations. The role of SULTAN test facility during the ITER construction is reviewed, and the load of work for the next three years is anticipated

  16. Small-Scale Spray Releases: Initial Aerosol Test Results

    Energy Technology Data Exchange (ETDEWEB)

    Mahoney, Lenna A.; Gauglitz, Phillip A.; Kimura, Marcia L.; Brown, Garrett N.; Kurath, Dean E.; Buchmiller, William C.; Smith, Dennese M.; Blanchard, Jeremy; Song, Chen; Daniel, Richard C.; Wells, Beric E.; Tran, Diana N.; Burns, Carolyn A.

    2012-11-01

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and across processing facilities in the DOE complex. Two key technical areas were identified where testing results were needed to improve the technical basis by reducing the uncertainty due to extrapolating existing literature results. The first technical need was to quantify the role of slurry particles in small breaches where the slurry particles may plug and result in substantially reduced, or even negligible, respirable fraction formed by high-pressure sprays. The second technical need was to determine the aerosol droplet size distribution and volume from prototypic breaches and fluids, specifically including sprays from larger breaches with slurries where data from the literature are scarce. To address these technical areas, small- and large-scale test stands were constructed and operated with simulants to determine aerosol release fractions and generation rates from a range of breach sizes and geometries. The properties of the simulants represented the range of properties expected in the WTP process streams and included water, sodium salt solutions, slurries containing boehmite or gibbsite, and a hazardous chemical simulant. The effect of anti-foam agents was assessed with most of the simulants. Orifices included round holes and

  17. Registratie van Seksueel Overdraagbare Aandoeningen bij GGD-en: jaarverslag 1996

    NARCIS (Netherlands)

    Laar MJW van de; Termorshuizen F; CIE

    1998-01-01

    In 1996 the total number of consultations on STD and HIV-testing at STD clinics and municipal health services was 13,226 and increased with 12.5% compared with 1995 (women 18%; men 7%). The total number of diagnosed STD was 4,976 and increased with 10.1% in 1996 compared with 1995 (women 16.9%; men

  18. Development and Execution of a Large-scale DDT Tube Test for IHE Material Qualification

    Energy Technology Data Exchange (ETDEWEB)

    Parker, Gary Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Broilo, Robert M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lopez-Pulliam, Ian Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Vaughan, Larry Dean [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-10-24

    Insensitive High Explosive (IHE) Materials are defined in Chapter IX of the DOE Explosive Safety Standard (DOE-STD-1212-2012) as being materials that are massdetonable explosives that are so insensitive that the probability of accidental initiation or transition from burning to detonation is negligible1. There are currently a number of tests included in the standard that are required to qualify a material as IHE, however, none of the tests directly evaluate for the transition from burning to detonation (aka deflagration-to-detonation transition, DDT). Currently, there is a DOE complex-wide effort to revisit the IHE definition in DOE-STD-1212-2012 and change the qualification requirements. The proposal lays out a new approach, requiring fewer, but more appropriate tests, for IHE Material qualification. One of these new tests is the Deflagration-to-Detonation Test. According to the redefinition proposal, the purpose of the new deflagration-todetonation test is “to demonstrate that an IHE material will not undergo deflagration-to-detonation under stockpile relevant conditions of scale, confinement, and material condition. Inherent in this test design is the assumption that ignition does occur, with onset of deflagration. The test design will incorporate large margins and replicates to account for the stochastic nature of DDT events.” In short, the philosophy behind this approach is that if a material fails to undergo DDT in a significant over-test, then it is extremely unlikely to do so in realistic conditions. This effort will be valuable for the B61 LEP to satisfy their need qualify the new production lots of PBX 9502. The work described in this report is intended as a preliminary investigation to support the proposed design of an overly conservative, easily fielded DDT test for updated IHE Material Qualification standard. Specifically, we evaluated the aspects of confinement, geometry, material morphology and temperature. We also developed and tested a

  19. Production LHC HTS power lead test results

    CERN Document Server

    Tartaglia, M; Fehér, S; Huang, Y; Orris, D F; Pischalnikov, Y; Rabehl, Roger Jon; Sylvester, C D; Zbasnik, J

    2005-01-01

    The Fermilab Magnet test facility has built and operated a test stand to characterize the performance of HTS power leads. We report here the results of production tests of 20 pairs of 7.5 kA HTS power leads manufactured by industry for installation in feed boxes for the LHC Interaction Region quadrupole strings. Included are discussions of the thermal, electrical, and quench characteristics under "standard" and "extreme" operating conditions, and the stability of performance across thermal cycles.

  20. Production LHC HTS power lead test results

    International Nuclear Information System (INIS)

    Tartaglia, M.A.; Carcagno, R.H.; Feher, S.; Huang, Y.; Orris, D.F.; Pischalnikov, Y.; Rabehl, R.J.; Sylvester, C.; Zbasnik, J.

    2004-01-01

    The Fermilab Magnet test facility has built and operated a test stand to characterize the performance of HTS power leads. We report here the results of production tests of 20 pairs of 7.5 kA HTS power leads manufactured by industry for installation in feed boxes for the LHC Interaction Region quadrupole strings. Included are discussions of the thermal, electrical, and quench characteristics under ''standard'' and ''extreme'' operating conditions, and the stability of performance across thermal cycles

  1. Uprated OMS Engine Status-Sea Level Testing Results

    Science.gov (United States)

    Bertolino, J. D.; Boyd, W. C.

    1990-01-01

    The current Space Shuttle Orbital Maneuvering Engine (OME) is pressure fed, utilizing storable propellants. Performance uprating of this engine, through the use of a gas generator driven turbopump to increase operating pressure, is being pursued by the NASA Johnson Space Center (JSC). Component level design, fabrication, and test activities for this engine system have been on-going since 1984. More recently, a complete engine designated the Integrated Component Test Bed (ICTB), was tested at sea level conditions by Aerojet. A description of the test hardware and results of the sea level test program are presented. These results, which include the test condition operating envelope and projected performance at altitude conditions, confirm the capability of the selected Uprated OME (UOME) configuration to meet or exceed performance and operational requirements. Engine flexibility, demonstrated through testing at two different operational mixture ratios, along with a summary of projected Space Shuttle performance enhancements using the UOME, are discussed. Planned future activities, including ICTB tests at simulated altitude conditions, and recommendations for further engine development, are also discussed.

  2. Temperature profile data from STD/CTD casts from the FLIP and other platforms from the Pacific Ocean during the International Decade of Ocean Exploration / North Pacific Experiment (IDOE/NORPAX) project, 30 January to 1974-02-14 (NODC Accession 8100433)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, sigma-T and salinity profile data were collected using STD/CTD casts from FLIP and other platforms in the Pacific Ocean from January 30, 1974 to...

  3. Boeing's STAR-FODB test results

    Science.gov (United States)

    Fritz, Martin E.; de la Chapelle, Michael; Van Ausdal, Arthur W.

    1995-05-01

    Boeing has successfully concluded a 2 1/2 year, two phase developmental contract for the STAR-Fiber Optic Data Bus (FODB) that is intended for future space-based applications. The first phase included system analysis, trade studies, behavior modeling, and architecture and protocal selection. During this phase we selected AS4074 Linear Token Passing Bus (LTPB) protocol operating at 200 Mbps, along with the passive, star-coupled fiber media. The second phase involved design, build, integration, and performance and environmental test of brassboard hardware. The resulting brassboard hardware successfully passed performance testing, providing 200 Mbps operation with a 32 X 32 star-coupled medium. This hardware is suitable for a spaceflight experiment to validate ground testing and analysis and to demonstrate performace in the intended environment. The fiber bus interface unit (FBIU) is a multichip module containing transceiver, protocol, and data formatting chips, buffer memory, and a station management controller. The FBIU has been designed for low power, high reliability, and radiation tolerance. Nine FBIUs were built and integrated with the fiber optic physical layer consisting of the fiber cable plant (FCP) and star coupler assembly (SCA). Performance and environmental testing, including radiation exposure, was performed on selected FBIUs and the physical layer. The integrated system was demonstrated with a full motion color video image transfer across the bus while simultaneously performing utility functions with a fiber bus control module (FBCM) over a telemetry and control (T&C) bus, in this case AS1773.

  4. Potential for false positive HIV test results with the serial rapid HIV testing algorithm

    Directory of Open Access Journals (Sweden)

    Baveewo Steven

    2012-03-01

    Full Text Available Abstract Background Rapid HIV tests provide same-day results and are widely used in HIV testing programs in areas with limited personnel and laboratory infrastructure. The Uganda Ministry of Health currently recommends the serial rapid testing algorithm with Determine, STAT-PAK, and Uni-Gold for diagnosis of HIV infection. Using this algorithm, individuals who test positive on Determine, negative to STAT-PAK and positive to Uni-Gold are reported as HIV positive. We conducted further testing on this subgroup of samples using qualitative DNA PCR to assess the potential for false positive tests in this situation. Results Of the 3388 individuals who were tested, 984 were HIV positive on two consecutive tests, and 29 were considered positive by a tiebreaker (positive on Determine, negative on STAT-PAK, and positive on Uni-Gold. However, when the 29 samples were further tested using qualitative DNA PCR, 14 (48.2% were HIV negative. Conclusion Although this study was not primarily designed to assess the validity of rapid HIV tests and thus only a subset of the samples were retested, the findings show a potential for false positive HIV results in the subset of individuals who test positive when a tiebreaker test is used in serial testing. These findings highlight a need for confirmatory testing for this category of individuals.

  5. Large-Scale Spray Releases: Initial Aerosol Test Results

    Energy Technology Data Exchange (ETDEWEB)

    Schonewill, Philip P.; Gauglitz, Phillip A.; Bontha, Jagannadha R.; Daniel, Richard C.; Kurath, Dean E.; Adkins, Harold E.; Billing, Justin M.; Burns, Carolyn A.; Davis, James M.; Enderlin, Carl W.; Fischer, Christopher M.; Jenks, Jeromy WJ; Lukins, Craig D.; MacFarlan, Paul J.; Shutthanandan, Janani I.; Smith, Dennese M.

    2012-12-01

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and across processing facilities in the DOE complex. Two key technical areas were identified where testing results were needed to improve the technical basis by reducing the uncertainty due to extrapolating existing literature results. The first technical need was to quantify the role of slurry particles in small breaches where the slurry particles may plug and result in substantially reduced, or even negligible, respirable fraction formed by high-pressure sprays. The second technical need was to determine the aerosol droplet size distribution and volume from prototypic breaches and fluids, specifically including sprays from larger breaches with slurries where data from the literature are scarce. To address these technical areas, small- and large-scale test stands were constructed and operated with simulants to determine aerosol release fractions and generation rates from a range of breach sizes and geometries. The properties of the simulants represented the range of properties expected in the WTP process streams and included water, sodium salt solutions, slurries containing boehmite or gibbsite, and a hazardous chemical simulant. The effect of anti-foam agents was assessed with most of the simulants. Orifices included round holes and

  6. Independent review of Oak Ridge HCTW test program and development of seismic evaluation criteria

    International Nuclear Information System (INIS)

    1995-05-01

    Many of the existing buildings at the Oak Ridge Y-12 Plant are steel frame construction with unreinforced hollow clay tile infill walls (HCTW). The HCTW infill provides some lateral seismic resistance to the design/evaluation basis earthquake; however acceptance criteria for this construction must be developed. The basis for the development of seismic criteria is the Oak Ridge HCTW testing and analysis program and the target performance goals of DOE 5480.28 and DOE-STD-1020-94. This report documents and independent review of the testing and analysis program and development of recommended acceptance criteria for Oak Ridge HCTW construction. The HCTW test program included ''macro'' wall in-plane and out-of-plane tests, full-scale wall in-plane and out-of-plane tests, in-situ out-of-plane test, shake table tests, and masonry component tests

  7. Effective communication of risks to young adults: using message framing and visual aids to increase condom use and STD screening.

    Science.gov (United States)

    Garcia-Retamero, Rocio; Cokely, Edward T

    2011-09-01

    Sexually Transmitted Diseases (STDs)-including HIV/AIDS-are among the most common infectious diseases in young adults. How can we effectively promote prevention and detection of STDs in this high risk population? In a two-phase longitudinal experiment we examined the effects of a brief risk awareness intervention (i.e., a sexual health information brochure) in a large sample of sexually active young adults (n = 744). We assessed the influence of gain- and loss-framed messages, and visual aids, on affective reactions, risk perceptions, attitudes, behavioral intentions, and reported behaviors relating to the prevention and detection of STDs. Results indicate that gain-framed messages induced greater adherence for prevention behaviors (e.g., condom use), whereas loss-framed messages were more effective in promoting illness-detecting behaviors (e.g., making an appointment with a doctor to discuss about STD screening). The influence of the framed messages on prevention and detection of STDs was mediated by changes in participants' attitudes toward the health behaviors along with changes in their behavioral intentions. Moreover, when visual aids were added to the health information, both the gain- and loss-framed messages became equally and highly effective in promoting health behaviors. These results converge with other data indicating that well-constructed visual aids are often among the most highly effective, transparent, fast, memorable, and ethically desirable means of risk communication. Theoretical, economic, and public policy implications of these results are discussed. (c) 2011 APA, all rights reserved.

  8. Human engineering of a radiological diagnostic system

    International Nuclear Information System (INIS)

    Andou, Eiji; Yuba, Fumimaro; Kotoh, Yukitoshi; Oohara, Kazuo; Uto, Fumiaki.

    1992-01-01

    Current practices for patient safety control in radiological diagnosis may involve problems. For solving of these problems, we have to bear in mind that the mental and physical capacity of patients tend to be limited during radiological testing. When radiography is performed using a general X-ray device at a source table distance (STD) of 100 cm, the patient's head can touch the X-ray tube housing during position adjustment on the stand (up and down adjustment) or the patient is made to take an unnatural posture during body positioning. With this in mind, we carried out a questionnaire survey about source image receptor distance (SID). This survey disclosed that more than 92% of the institutions have adapted 100 cm STD. We then conducted a three-dimensional analysis of a patient's posture and motion by video taping patients during positioning on a roentgenographic table. This analysis revealed that the adoption of the 120 cm STD resulted in less contact between the patient's head and X-ray tube housing, less of unnatural body position and less time required for positioning adjustment when compared to those at 100 cm STD. These results indicate that the current STD (100 cm) is not suitable for safe and smooth adjustment of the positioning of a patient's body of a roentgenographic table. We examined the optimun STD, taking into consideration the dimensions of patient's movement and posture during an X-ray examination. (author)

  9. Temperature profiles from STD casts from the Spanish Sahara from NOAA Ship OCEANOGRAPHER as part of the International Decade of Ocean Exploration / Coastal Upwelling Ecosystems Analysis (IDOE/CUEA) from 1974-03-08 to 1974-05-01 (NODC Accession 9800112)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profiles were collected from STD casts off the Spanish Sahara from NOAA Ship OCEANOGRAPHER from 08 March 1974 to 01 May 1974. Data were collected by the...

  10. Salinity profile data from STD/CTD casts from the ACONA and other platforms from the Atlantic Ocean during the International Decade of Ocean Exploration / North Pacific Experiment (IDOE/NORPAX) project, 20 October to 1976-11-06 (NODC Accession 7800604)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Salinity profile data were collected using STD/CTD casts from ACONA and other platforms in the Pacific Ocean from October 20, 1976 to November 6, 1976. Data were...

  11. Human factors evaluation of the engineering test reactor control room

    International Nuclear Information System (INIS)

    Banks, W.W.; Boone, M.P.

    1981-03-01

    The Reactor and Process Control Rooms at the Engineering Test Reactor were evaluated by a team of human factors engineers using available human factors design criteria. During the evaluation, ETR, equipment and facilities were compared with MIL-STD-1472-B, Human Engineering design Criteria for Military Systems. The focus of recommendations centered on: (a) displays and controls; placing displays and controls in functional groups; (b) establishing a consistent color coding (in compliance with a standard if possible); (c) systematizing annunciator alarms and reducing their number; (d) organizing equipment in functional groups; and (e) modifying labeling and lines of demarcation

  12. IEEE C37.98-1987: IEEE standard seismic testing of relays

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This standard specifies the procedures to be used in the seismic testing of relays used in power system facilities. The standard is concerned with the determination of the seismic fragility level of relays and also gives recommendations for proof testing. The purpose of this standard is to establish procedures for determining the seismic capabilities of protective and auxiliary relays. These procedures employ what has been called fragility testing in IEEE Std 344-1987. To define the conditions for fragility testing of relays, parameters in three separate areas must be specified. In general, they are (1) the electrical settings and inputs to the relay, and other information to define its conditions during the test; (2) the change in state, deviation in operating characteristics or tolerances, or other change of performance of the relay that constitutes failure; (3) the seismic vibration environment to be imposed during the test. Since it is not possible to define the conditions for every conceivable application for all relays, those parameters, which in practice encompass the majority of applications, have been specified in this standard. When the application of the relay is other than as specified under any of (1), (2), and (3), or if it is not practical to apply existing results of fragility tests to that new application, then proof testing must be performed for that new case

  13. Results from the CLIC Test Facility

    CERN Document Server

    Braun, H; Bossart, Rudolf; Chautard, F; Corsini, R; Delahaye, J P; Godot, J C; Hutchins, S; Kamber, I; Madsen, J H B; Rinolfi, Louis; Rossat, G; Schreiber, S; Suberlucq, Guy; Thorndahl, L; Wilson, Ian H; Wuensch, Walter

    1996-01-01

    In order to study the principle of the Compact Linear Collider (CLIC) based on the Two Beam Acceleration (TBA) scheme at high frequency, a CLIC Test Facility (CTF) has been set-up at CERN. After four years of successful running, the experimental programme is now fully completed and all its objectives reached, particularly the generation of a high intensity drive beam with short bunches by a photo-injector, the production of 30 GHz RF power and the acceleration of a probe beam by 30 GHz structures. A summary of the CTF results and their impact on linear collider design is given. This covers 30 GHz high power testing, study of intense, short single bunches; as well as RF-Gun, photocathode and beam diagnostic developments. A second phase of the test facility (CTF2) is presently being installed to demonstrate the feasibility of the TBA scheme by constructing a fully engineered, 10 m long, test section very similar to the CLIC drive and main linacs, producing up to 480 MW of peak RF power at 30 GHz and acceleratin...

  14. Interpreting Results from the Standardized UXO Test Sites

    National Research Council Canada - National Science Library

    May, Michael; Tuley, Michael

    2007-01-01

    ...) and the Environmental Security Technology Certification Program (ESCTP) to complete a detailed analysis of the results of testing carried out at the Standardized Unexploded Ordnance (UXO) Test Sites...

  15. Cascade Distiller System Performance Testing Interim Results

    Science.gov (United States)

    Callahan, Michael R.; Pensinger, Stuart; Sargusingh, Miriam J.

    2014-01-01

    The Cascade Distillation System (CDS) is a rotary distillation system with potential for greater reliability and lower energy costs than existing distillation systems. Based upon the results of the 2009 distillation comparison test (DCT) and recommendations of the expert panel, the Advanced Exploration Systems (AES) Water Recovery Project (WRP) project advanced the technology by increasing reliability of the system through redesign of bearing assemblies and improved rotor dynamics. In addition, the project improved the CDS power efficiency by optimizing the thermoelectric heat pump (TeHP) and heat exchanger design. Testing at the NASA-JSC Advanced Exploration System Water Laboratory (AES Water Lab) using a prototype Cascade Distillation Subsystem (CDS) wastewater processor (Honeywell d International, Torrance, Calif.) with test support equipment and control system developed by Johnson Space Center was performed to evaluate performance of the system with the upgrades as compared to previous system performance. The system was challenged with Solution 1 from the NASA Exploration Life Support (ELS) distillation comparison testing performed in 2009. Solution 1 consisted of a mixed stream containing human-generated urine and humidity condensate. A secondary objective of this testing is to evaluate the performance of the CDS as compared to the state of the art Distillation Assembly (DA) used in the ISS Urine Processor Assembly (UPA). This was done by challenging the system with ISS analog waste streams. This paper details the results of the AES WRP CDS performance testing.

  16. Temperature profile data from STD/CTD casts from the KANA KEOKI and other platforms from the Atlantic Ocean during the International Decade of Ocean Exploration / North Pacific Experiment (IDOE/NORPAX) project, 1977-11-10 to 1978-02-14 (NODC Accession 8100432)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature and salinity profile data were collected using STD/CTD casts from KANA KEOKI and other platforms in the Pacific Ocean from November 10, 1977 to February...

  17. 42 CFR 493.1281 - Standard: Comparison of test results.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Comparison of test results. 493.1281 Section 493.1281 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Testing Analytic Systems § 493.1281 Standard: Comparison of test results. (a) If a laboratory performs the...

  18. Evaluation of electrical test conditions in MIL-M-38510 slash sheets

    Science.gov (United States)

    Sandgren, K.

    1980-08-01

    Adequacy of MIL-M-38510 slash sheet requirements for electrical test conditions in an automated test environment were evaluated. Military temperature range commercial devices of 13 types from 6 manufacturers were purchased. Software for testing these devices and for varying the test conditions was written for the Tektronix S-3260 test system. The devices were tested to evaluate the effects of pin-condition settling time, measurement sequence of the same and different D-C parameters, temperature sequence, differently defined temperature ambients, variable measurement conditions, sequence of time measurements, pin-application sequence, and undesignated pin condition ambiguity. An alternative to current tri-state enable and disable time measurements is proposed; S-3260 'open' and 'ground' conditions are characterized; and suggestions for changes in MIL-M-38510 slash sheet specifications and MIL-STD-883 test methods are proposed, both to correct errors and ambiguities and to facilitate the gathering of repeatable data on automated test equipment. Data obtained showed no sensitivity to measurement or temperature sequence nor to temperature ambient, provided that test times were not excessive. V sub ICP tests and some low current measurements required allowance for a pin condition settling time because of the test system speed. Some pin condition application sequences yielded incorrect measurements. Undefined terminal conditions of output pins were found to affect I sub OS and propagation delay time measurements. Truth table test results varied with test frequency and V sub IL for low-power Schottky devices.

  19. Study on the Surface Microstructure of a Modified STD61 Steel Mold Used for the Die Casting Process

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Ha-Young; Lee, Seung-Joon; Kang, Minwoo; Lee, Suk-Jin; Lee, Young-Kook [Yonsei University, Seoul (Korea, Republic of); Yang, Won Jon [Korea Institute of Materials Science, Changwon (Korea, Republic of); Jeong, Jae Suk; Kim, Byung-Hoon [Doosan Heavy Industries and Construction, Changwon (Korea, Republic of)

    2016-09-15

    The surface microstructure and crack formation of an aluminum die-casting mold were investigated. The mold was made of a modified STD61 steel, and was used for more than 165,000 cycles. The mold surface consisted of four layers; an oxidized layer, a decarburized layer, a network carbide layer and a tempered martensite matrix. The depth down to the hardest network carbide layer was ⁓200 μm. Inside the matrix, M{sub 3}C transition carbides were dissolved so that solute C joined pre-existing M{sub 2}3C{sub 6} and MC carbides to make them coarse. About 60% of thermal fatigue cracks had a depth less than 200 μm due to the hard network carbide layer, which obstructed the propagation of cracks. Cracks of over 200 μm were filled with oxide wedges of Al and Si which was which flown from the molten alloy as well as the Fe oxide.

  20. Hawaiian Electric Advanced Inverter Test Plan - Result Summary

    Energy Technology Data Exchange (ETDEWEB)

    Hoke, Anderson; Nelson, Austin; Prabakar, Kumaraguru; Nagarajan, Adarsh

    2016-10-14

    This presentation is intended to share the results of lab testing of five PV inverters with the Hawaiian Electric Companies and other stakeholders and interested parties. The tests included baseline testing of advanced inverter grid support functions, as well as distribution circuit-level tests to examine the impact of the PV inverters on simulated distribution feeders using power hardware-in-the-loop (PHIL) techniques. hardware-in-the-loop (PHIL) techniques.

  1. Temperature profile data from STD/CTDs cast from the GYRE and other platforms from the Atlantic Ocean during the INTERNATIONAL DECADE OF OCEAN EXPLORATION / North Pacific Experiment (IDOE/NORPAX) project, 07 February 1979 to 14 June 1980 (NODC Accession 8200065)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature and salinity profile data were collected using STD/CTD casts from GYRE and other platforms in the Pacific Ocean from February 7, 1979 to June 14, 1980....

  2. US Public Sexually Transmitted Disease Clinical Services in an Era of Declining Public Health Funding: 2013-14.

    Science.gov (United States)

    Leichliter, Jami S; Heyer, Kate; Peterman, Thomas A; Habel, Melissa A; Brookmeyer, Kathryn A; Arnold Pang, Stephanie S; Stenger, Mark R; Weiss, Gretchen; Gift, Thomas L

    2017-08-01

    We examined the infrastructure for US public sexually transmitted disease (STD) clinical services. In 2013 to 2014, we surveyed 331 of 1225 local health departments (LHDs) who either reported providing STD testing/treatment in the 2010 National Profile of Local Health Departments survey or were the 50 local areas with the highest STD cases or rates. The sample was stratified by jurisdiction population size. We examined the primary referral clinics for STDs, the services offered and the impact of budget cuts (limited to government funding only). Data were analyzed using SAS, and analyses were weighted for nonresponse. Twenty-two percent of LHDs cited a specialty STD clinic as their primary referral for STD services; this increased to 53.5% of LHDs when combination STD-family planning clinics were included. The majority of LHDs (62.8%) referred to clinics providing same-day services. Sexually transmitted disease clinics more frequently offered extragenital testing for chlamydia and/or gonorrhea (74.7%) and gonorrhea culture (68.5%) than other clinics (52.9%, 46.2%, respectively; P < 0.05). The majority of LHDs (61.5%) reported recent budget cuts. Of those with decreased budgets, the most common impacts were fewer clinic hours (42.8%; 95% confidence interval [CI], 24.4-61.2), reduced routine screening (40.2%; 95% CI, 21.7-58.8) and reductions in partner services (42.1%; 95% CI, 23.6-60.7). One quarter of those with reduced STD budgets increased fees or copays for clients. Findings demonstrate gaps and reductions in US public STD services including clinical services that play an important role in reducing disease transmission. Furthermore, STD clinics tended to offer more specialized STD services than other public clinics.

  3. IEEE C37.98-1978: IEEE standard seismic testing of relays

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This standard specifies the procedures to be used in the seismic testing of relays used in power system facilities. The standard is concerned with the determination of the seismic fragility level of relays and also gives recommendations for proof testing. The purpose of this standard is to establish procedures for determining the seismic capabilities of protective and auxiliary relays. These procedures employ what has been called fragility testing in ANSI/IEEE Std 344-1975, Recommended Practices for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations. In order to define the conditions for fragility testing of relays, parameters in three separate areas must be specified. In general they are: (1) the electrical settings and inputs to the relay, and other information to define its conditions during the test; (2) the change in state, deviation in operating characteristics or tolerances, or other change of performance of the relay which constitutes failure; (3) the seismic vibration environment to be imposed during the test. Since it is not possible to define the conditions for every conceivable application for all relays, those parameters, which in practice encompass the majority of applications, have been specified in this standard. When the application of the relay is other than as specified under any of (1), (2), and (3), or if it is not practical to apply existing results of fragility tests to that new case

  4. A violência nas relações afetivas dificulta a prevenção de DST/AIDS? Does violence in the emotional relationships make STD/AIDS prevention more difficult?

    Directory of Open Access Journals (Sweden)

    Maria Helena Ruzany

    2003-08-01

    Full Text Available OBJETIVOS: identificar a ocorrência de situações de violência no cotidiano de adolescentes e jovens de comunidades de baixa renda; pesquisar a relação entre uso de drogas e comportamentos de risco de DST/AIDS; e verificar se a violência nas relações afetivas entre adolescentes e jovens dificulta a prevenção de DST/AIDS. MÉTODOS: estudo epidemiológico com adolescentes e jovens de dois bairros da cidade do Rio de Janeiro, a partir dos dados obtidos de um questionário estruturado que versava sobre perfil da clientela, informações sobre a família, uso de drogas, situações de violência do cotidiano, experiência sexual, entre outras. Para o presente artigo, somente as variáveis que particularizavam agressividade, uso de drogas, comportamentos sexuais de risco e violência nas relações afetivas foram analisadas. Em particular, destacou-se a associação da variável "eu usei camisinha na última relação sexual" com as questões que indicavam ou não atitudes violentas nas relações afetivas. RESULTADOS: participaram 1.041 indivíduos na faixa etária entre 14 e 22 anos, sendo 53,6% do sexo feminino. Entre os resultados mais relevantes, observou-se uma relação estatisticamente significativa entre o não uso de preservativo (pOBJECTIVES: to identify violent situations in the daily life of adolescents and young people of low-income communities; to establish a relation between the use of drugs and STD/AIDS risk behavior; and to verify if violence in the emotional relationships between adolescents and young people make the STD/AIDS prevention more difficult. METHOD: epidemiological study with adolescents and young people of two neighborhoods in the city of Rio de Janeiro, based on the results obtained from a structured questionnaire that dealt with subjects' profile, information about the family, use of drugs, daily violent situations, sexual experience, among others. For the present article, only the variables that dealt with

  5. Evaluation of ring tensile test results

    International Nuclear Information System (INIS)

    Chatterjee, S.; Anantharaman, S.; Balakrishnan, K.S.; Sivaramakrish, K.S.

    1990-01-01

    Ring specimens of 5-mm width cut from Zircaloy-2 cladding of reactor operated fuel elements that had experienced 5000 to 15,000 MWD/T of fuel burnup were subjected to ring tensile testing. The true stress-true strain data points up to the onset of necking from the individual load-elongation curves of these specimens were used as input data in Voce's equation. The results reveal that the uniform elongation (UE) values generated using Voce's equation were within (UE-2)% of the experimental percent uniform elongation (UE%). The corresponding ultimate tensile strength values were within ±1%. The uncertainty inherently associated in the determination of gauge length introduces extraneous deformation in the rings tested. Previous results had shown that a 14% increase in cladding diameter caused the gauge length to increase by 40%. To simulate the contribution of extraneous deformation due to an increase in cladding diameter, an analysis of the variation of the tensile parameters (uniform elongation and ultimate tensile strength) due to increase in the gauge length in the range of 10 to 40% was carried out. The results are discussed

  6. 688,112 statistical results : Content mining psychology articles for statistical test results

    NARCIS (Netherlands)

    Hartgerink, C.H.J.

    2016-01-01

    In this data deposit, I describe a dataset that is the result of content mining 167,318 published articles for statistical test results reported according to the standards prescribed by the American Psychological Association (APA). Articles published by the APA, Springer, Sage, and Taylor & Francis

  7. Back pressure helium leak testing of fuel elements for Dhruva research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Dutta, N G; Ahmad, Anis; Kulkarni, P G; Purushotham, D S.C. [Bhabha Atomic Research Centre, Bombay (India). Atomic Fuels Div.

    1994-12-31

    Leak tightness specification on fuel elements for reactor use is always very stringent. The fuel element fabricated for Dhruva reactor is specified to be leak-tight up to 1 x 10{sup -8} std. cc/sec. The fuel element consists of natural metallic uranium rod around 12.5 mm diameter and 3 meter long in encased in aluminium tube and seal welded at both ends. Since helium gas is not filled inside the fuel element while doing seal welding, the only way to do helium leak testing of such fuel rods is by back-pressure technique. This paper describes the development of test facility for carrying out such test and discusses the experiences of carrying out helium leak testing by back-pressure technique on more than 700 numbers of fuel rods for Dhruva reactor. (author). 4 refs., 3 figs., 1 tab.

  8. Reliability Verification of DBE Environment Simulation Test Facility by using Statistics Method

    International Nuclear Information System (INIS)

    Jang, Kyung Nam; Kim, Jong Soeg; Jeong, Sun Chul; Kyung Heum

    2011-01-01

    In the nuclear power plant, all the safety-related equipment including cables under the harsh environment should perform the equipment qualification (EQ) according to the IEEE std 323. There are three types of qualification methods including type testing, operating experience and analysis. In order to environmentally qualify the safety-related equipment using type testing method, not analysis or operation experience method, the representative sample of equipment, including interfaces, should be subjected to a series of tests. Among these tests, Design Basis Events (DBE) environment simulating test is the most important test. DBE simulation test is performed in DBE simulation test chamber according to the postulated DBE conditions including specified high-energy line break (HELB), loss of coolant accident (LOCA), main steam line break (MSLB) and etc, after thermal and radiation aging. Because most DBE conditions have 100% humidity condition, in order to trace temperature and pressure of DBE condition, high temperature steam should be used. During DBE simulation test, if high temperature steam under high pressure inject to the DBE test chamber, the temperature and pressure in test chamber rapidly increase over the target temperature. Therefore, the temperature and pressure in test chamber continue fluctuating during the DBE simulation test to meet target temperature and pressure. We should ensure fairness and accuracy of test result by confirming the performance of DBE environment simulation test facility. In this paper, in order to verify reliability of DBE environment simulation test facility, statistics method is used

  9. Ball Aerospace SBMD Coating Test Results

    Science.gov (United States)

    Brown, Robert; Lightsey, Paul; Russell, J. Kevin (Technical Monitor)

    2002-01-01

    The Sub-scale Beryllium Mirror Demonstrator that was successfully tested to demonstrate cryogenic figuring of a bare mirror has been coated with a protected gold reflective surface and retested at cryogenic temperatures. Results showing less than 9 nm rms surface distortion attributable to the added coating are presented.

  10. IEEE standard for qualification of class 1E lead storage batteries for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    IEEE Std 323-1974, Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations, was developed to provide guidance for demonstrating and documenting the adequacy of electrical equipment used in all Class 1E and interface systems. This standard, IEEE Std 535-1979, was developed to provide specific methods and type test procedures for lead storage batteries in reference to IEEE Std 323-1974

  11. Preliminary results of steel containment vessel model test

    International Nuclear Information System (INIS)

    Matsumoto, T.; Komine, K.; Arai, S.

    1997-01-01

    A high pressure test of a mixed-scaled model (1:10 in geometry and 1:4 in shell thickness) of a steel containment vessel (SCV), representing an improved boiling water reactor (BWR) Mark II containment, was conducted on December 11-12, 1996 at Sandia National Laboratories. This paper describes the preliminary results of the high pressure test. In addition, the preliminary post-test measurement data and the preliminary comparison of test data with pretest analysis predictions are also presented

  12. Field Lysimeter Investigations - test results: Low-Level Waste Data Base Development Program: Test results for fiscal years 1994-1995

    International Nuclear Information System (INIS)

    McConnell, J.W. Jr.; Rodgers, R.D.; Hilton, L.D.; Neilson, R.M. Jr.

    1996-06-01

    The Field Lysimeter Investigations: Low-Level Waste Data Base Development Program, funded by the U.S. Nuclear Regulatory Commission (NRC), is (1) studying the degradation effects in EPICOR-II organic ion-exchange resins caused by radiation, (2) examining the adequacy of test procedures recommended in the Branch Technical Position on Waste Form to meet the requirements of 10 CFR 61 using solidified EPICOR-II resins, (3) obtaining performance information on solidified EPICOR-II ion-exchange resins in a disposal environment, and (4) determining the condition of EPICOR-II liners. Results of the final 2 (10 total) years of data acquisition from operation of the field testing are presented and discussed. During the continuing field testing, both portland type I-II cement and Dow vinyl ester-styrene waste forms are being tested in lysimeter arrays located at Argonne National Laboratory-East in Illinois and at Oak Ridge National Laboratory. The experimental equipment is described and results of waste form characterization using tests recommended by the NRC's open-quotes Technical Position on Waste Formclose quotes are presented. The study is designed to provide continuous data on nuclide release and movement, as well as environmental conditions, over a 20-year period. At the end of the tenth year, the experiment was closed down. Examination of soil and waste forms is planned to be conducted next and will be reported later

  13. Early results of gate valve flow interruption blowdown tests

    International Nuclear Information System (INIS)

    DeWall, K.G.

    1988-01-01

    The preliminary results of the USNRC/INEL high-energy BWR line break flow interruption testing are presented. Two representative nuclear valve assemblies were cycled under design basis Reactor Water Cleanup pipe break conditions to provide input for the technical basis for resolving the Nuclear Regulatory Commission's Generic Issue 87. The effects of the blowdown hydraulic loadings on valve operability, especially valve closure stem forces, were studied. The blowdown tests showed that, given enough thrust, typical gate valves will close against the high flow resulting from a line break. The tests also showed that proper operator sizing depends on the correct identification of values for the sizing equation. Evidence exists that values used in the past may not be conservative for all valve applications. The tests showed that improper operator lock ring installation following test or maintenance can invalidate in-situ test results and prevent the valve from performing its design function. 2 refs., 12 figs., 2 tabs

  14. Potential for false positive HIV test results with the serial rapid HIV testing algorithm.

    Science.gov (United States)

    Baveewo, Steven; Kamya, Moses R; Mayanja-Kizza, Harriet; Fatch, Robin; Bangsberg, David R; Coates, Thomas; Hahn, Judith A; Wanyenze, Rhoda K

    2012-03-19

    Rapid HIV tests provide same-day results and are widely used in HIV testing programs in areas with limited personnel and laboratory infrastructure. The Uganda Ministry of Health currently recommends the serial rapid testing algorithm with Determine, STAT-PAK, and Uni-Gold for diagnosis of HIV infection. Using this algorithm, individuals who test positive on Determine, negative to STAT-PAK and positive to Uni-Gold are reported as HIV positive. We conducted further testing on this subgroup of samples using qualitative DNA PCR to assess the potential for false positive tests in this situation. Of the 3388 individuals who were tested, 984 were HIV positive on two consecutive tests, and 29 were considered positive by a tiebreaker (positive on Determine, negative on STAT-PAK, and positive on Uni-Gold). However, when the 29 samples were further tested using qualitative DNA PCR, 14 (48.2%) were HIV negative. Although this study was not primarily designed to assess the validity of rapid HIV tests and thus only a subset of the samples were retested, the findings show a potential for false positive HIV results in the subset of individuals who test positive when a tiebreaker test is used in serial testing. These findings highlight a need for confirmatory testing for this category of individuals.

  15. Partial-array test results in IFSMTF

    International Nuclear Information System (INIS)

    Lue, J.W.; Dresner, L.; Koizumi, K.; Lubell, M.S.; Luton, J.N.; Shen, S.S.; Zahn, G.R.; Zichy, J.A.

    1985-01-01

    Preliminary performance tests of two large superconducting magnets have been carried out in the International Fusion Superconducting Magnet Test Facility (IFSMTF). Each of the Japanese (JA) and General Dynamics/Convair (GD) coils was operated up to its full design current of 10.2 kA with the other serving as an adjacent background coil at 40% of design current. Cryostatic stability was demonstrated for both coils by noting recovery from a full half-turn (5 m) driven normal. A new pick-up coil compensation scheme was successfully used for the quench detection system. Each coil remained superconducting when the other was dumped. Unique instrumentation was used to measure changes in bore dimensions and displacement of the winding from the coil case. Agreement between structural analysis and measurement of bore dimension changes resulting from magnetic loads is good. The Swiss (CH) coil underwent only a cryogenic test. The forced cooling worked well and an inlet temperature of 3.8 K was demonstrated

  16. Experimental test results of multi-channel test rig of T1 test section, 5

    International Nuclear Information System (INIS)

    Hino, Ryutaro; Takase, Kazuyuki; Miyamoto, Yoshiaki

    1990-09-01

    Channel blockage test on a fuel column of the high temperature engineering test reactor (HTTR) has been performed under the helium gas atmosphere at a high temperature and a high pressure in order to obtain safety data on flow rate and temperature distributions in the fuel column with the multi-channel test rig of the fuel stack test section (T 1 ) in HENDEL. In the test, one of 12 fuel channels was blockaded to 90% of flow area at the channel inlet. Experimental results showed that the helium gas flow rate in the blockaded channel was 28%∼33% lower than the average flow rate for Reynolds number from 2300 to 14000 in isothermal flow. When simulated fuel rods were heated, the flow rate in the blockaded channel did not decrease down in comparison with the isothermal flow. This is due to that the heat generated in the fuel rods conducts to the other fuel channels in graphite fuel blocks, so that accelerated pressure losses in the fuel channels change with helium gas temperatures. (author)

  17. Caltrans accelerated pavement testing (CAL/APT) program - test results: 1993-1996

    CSIR Research Space (South Africa)

    Nokes, WA

    1997-08-01

    Full Text Available By combining the results of both the HVS and laboratory tests, interpretations of pavement performance are described and recommendations for pavement design and construction have been made to Caltrans....

  18. Finite Element Analysis and Test Results Comparison for the Hybrid Wing Body Center Section Test Article

    Science.gov (United States)

    Przekop, Adam; Jegley, Dawn C.; Rouse, Marshall; Lovejoy, Andrew E.

    2016-01-01

    This report documents the comparison of test measurements and predictive finite element analysis results for a hybrid wing body center section test article. The testing and analysis efforts were part of the Airframe Technology subproject within the NASA Environmentally Responsible Aviation project. Test results include full field displacement measurements obtained from digital image correlation systems and discrete strain measurements obtained using both unidirectional and rosette resistive gauges. Most significant results are presented for the critical five load cases exercised during the test. Final test to failure after inflicting severe damage to the test article is also documented. Overall, good comparison between predicted and actual behavior of the test article is found.

  19. Production Facility Prototype Blower 1000 Hour Test Results II

    Energy Technology Data Exchange (ETDEWEB)

    Wass, Alexander Joseph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Woloshun, Keith Albert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dale, Gregory E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dalmas, Dale Allen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Romero, Frank Patrick [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-01-08

    Long duration tests of the Aerzen GM 12.4 roots style blower in a closed loop configuration provides valuable data and lessons learned for long-term operation at the Mo-99 production facility. The blower was operated in a closed loop configuration with the flow conditions anticipated in plant operation with a Mo-100 target inline. The additional thermal energy generated from beam heating of the Mo-100 disks were not included in these tests. Five 1000 hour tests have been completed since the first test was performed in January of 2016. All five 1000 hour tests have proven successful in exposing preventable issues related to oil and helium leaks. All blower tests to this date have resulted in stable blower performance and consistency. A summary of the results for each test, including a review of the first and second tests, are included in this report.

  20. Fluor-Hanford 3013 Digital Radiography Dead Zone Mitigation Project Pressure Test Report

    International Nuclear Information System (INIS)

    Gibbs, K.

    2003-01-01

    The use of digital radiographic (DR) measurement of lid deflection as an indication of pressurization of the 3013 inner can was first reported by the Savannah River Technology Center (SRTC). The conclusions of this report were that for cans with relatively large initial concavity, lid deflection could be used to meet the 3013 standard (DOE-STD-3013-2000) requirement for a nondestructive indication of a pressurization of 100 psig. During acceptance testing of the system in the Spring of 2003, it was confirmed that for some cans the DR measured lid deflection could become insensitive to the change in lid deflection when compared to actual mechanical measurements. The basic explanation of this phenomenon is that characteristics of the lid geometry such as tilt and wobble can obfuscate the bottom of the lid where the deflection is measured. The purpose of this report is to document the results of the pressure testing and the efficacy of the alternate imaging and analysis methods developed to mitigate the dead zone problem. Prior to review of the results, a review of the current method and an introduction to the newly developed methods and techniques is provided

  1. A Fuzzy Logic Based Method for Analysing Test Results

    Directory of Open Access Journals (Sweden)

    Le Xuan Vinh

    2017-11-01

    Full Text Available Network operators must perform many tasks to ensure smooth operation of the network, such as planning, monitoring, etc. Among those tasks, regular testing of network performance, network errors and troubleshooting is very important. Meaningful test results will allow the operators to evaluate network performanceof any shortcomings and to better plan for network upgrade. Due to the diverse and mainly unquantifiable nature of network testing results, there is a needs to develop a method for systematically and rigorously analysing these results. In this paper, we present STAM (System Test-result Analysis Method which employs a bottom-up hierarchical processing approach using Fuzzy logic. STAM is capable of combining all test results into a quantitative description of the network performance in terms of network stability, the significance of various network erros, performance of each function blocks within the network. The validity of this method has been successfully demonstrated in assisting the testing of a VoIP system at the Research Instiute of Post and Telecoms in Vietnam. The paper is organized as follows. The first section gives an overview of fuzzy logic theory the concepts of which will be used in the development of STAM. The next section describes STAM. The last section, demonstrating STAM’s capability, presents a success story in which STAM is successfully applied.

  2. Sims Prototype System 2 test results: Engineering analysis

    Science.gov (United States)

    1978-01-01

    The testing, problems encountered, and the results and conclusions obtained from tests performed on the IBM Prototype System, 2, solar hot water system, at the Marshall Space Flight Center Solar Test Facility was described. System 2 is a liquid, non draining solar energy system for supplying domestic hot water to single residences. The system consists of collectors, storage tank, heat exchanger, pumps and associated plumbing and controls.

  3. Large-Scale Spray Releases: Additional Aerosol Test Results

    Energy Technology Data Exchange (ETDEWEB)

    Daniel, Richard C.; Gauglitz, Phillip A.; Burns, Carolyn A.; Fountain, Matthew S.; Shimskey, Rick W.; Billing, Justin M.; Bontha, Jagannadha R.; Kurath, Dean E.; Jenks, Jeromy WJ; MacFarlan, Paul J.; Mahoney, Lenna A.

    2013-08-01

    One of the events postulated in the hazard analysis for the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak event involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids that behave as a Newtonian fluid. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and in processing facilities across the DOE complex. To expand the data set upon which the WTP accident and safety analyses were based, an aerosol spray leak testing program was conducted by Pacific Northwest National Laboratory (PNNL). PNNL’s test program addressed two key technical areas to improve the WTP methodology (Larson and Allen 2010). The first technical area was to quantify the role of slurry particles in small breaches where slurry particles may plug the hole and prevent high-pressure sprays. The results from an effort to address this first technical area can be found in Mahoney et al. (2012a). The second technical area was to determine aerosol droplet size distribution and total droplet volume from prototypic breaches and fluids, including sprays from larger breaches and sprays of slurries for which literature data are mostly absent. To address the second technical area, the testing program collected aerosol generation data at two scales, commonly referred to as small-scale and large-scale testing. The small-scale testing and resultant data are described in Mahoney et al. (2012b), and the large-scale testing and resultant data are presented in Schonewill et al. (2012). In tests at both scales, simulants were used

  4. Health Communication and Social Marketing Campaigns for Sexually Transmitted Disease Prevention and Control: What Is the Evidence of their Effectiveness?

    Science.gov (United States)

    Friedman, Allison L; Kachur, Rachel E; Noar, Seth M; McFarlane, Mary

    2016-02-01

    Despite the ubiquity of sex in the media, a culture of silence surrounds sexual health in the United States, serving as a barrier to sexually transmitted disease (STD) prevention, testing, and treatment. Campaigns can increase STD-related knowledge, communication, and protective behaviors. This review assesses the effectiveness of STD prevention and testing campaigns in the United States to inform the field on their use as a strategy for affecting behavior change. A comprehensive literature search was conducted to identify original research articles, published between 2000 and 2014, which report on US media campaigns promoting community- or population-level STD testing or prevention behaviors and are evaluated for impact on one or more behavioral outcomes. Titles and abstracts were independently reviewed by 2 researchers. The review yielded 26 articles representing 16 unique STD testing and/or prevention campaigns. Most campaigns were developed using formative research and social marketing or behavioral theory. Most campaigns (68.75%) used posttest-only or pretest-posttest designs without comparison groups for evaluation; only 5 campaigns used control groups, and these proved challenging (i.e., achieving necessary exposure and avoiding contamination). Nearly all campaigns found differences between exposed and unexposed individuals on one or more key behavioral outcomes. Several campaigns found dose-response relationships. Among evaluations with uncontaminated control groups whose campaigns achieved sufficient exposure, sustained campaign effects were observed among targeted populations. Current findings suggest that campaigns can impact targeted STD-related behaviors and add to the evidence that greater exposure is associated with greater behavior change.

  5. 7 CFR 91.24 - Reports of test results.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Reports of test results. 91.24 Section 91.24 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) COMMODITY LABORATORY TESTING PROGRAMS...

  6. 688,112 statistical results: Content mining psychology articles for statistical test results

    OpenAIRE

    Hartgerink, C.H.J.

    2016-01-01

    In this data deposit, I describe a dataset that is the result of content mining 167,318 published articles for statistical test results reported according to the standards prescribed by the American Psychological Association (APA). Articles published by the APA, Springer, Sage, and Taylor & Francis were included (mining from Wiley and Elsevier was actively blocked). As a result of this content mining, 688,112 results from 50,845 articles were extracted. In order to provide a comprehensive set...

  7. Test results of sodium-water reaction testing in near prototypical LMR steam generator

    International Nuclear Information System (INIS)

    Boardman, C.E.; Hui, M.; Neely, H.H.

    1990-01-01

    An extensive test program has been performed in the United States to investigate the effects of large sodium-water reaction events in LMFBR steam generators. Tests were conducted in the Large Leak Test Rig (LLTR) located at the Energy Technology Engineering Center (ETEC). The program was divided into two phases, Series I and Series II, for the purpose of satisfying near-term and long-term needs. Series II was further subdivided into large and intermediate leak tests. This paper will emphasize the Series II intermediate leak tests and resulting conclusions for steam generator design and operation. 11 figs, 2 tabs

  8. Prevalence of Neisseria gonorrhoeae and Chlamydia trachomatis infection in men attending STD clinics in Brazil Prevalência de Neisseria gonorrhoeae e infecção pela Chlamydia trachomatis em homens atendidos em clínicas de DST no Brasil

    Directory of Open Access Journals (Sweden)

    Marcelo Joaquim Barbosa

    2010-10-01

    Full Text Available INTRODUCTION: The study aimed to assess the prevalence of Neisseria gonorrhoeae and Chlamydia trachomatis infections and identify demographic, behavioral and clinical factors correlated withsuch infections in men attending six sexually transmitted disease clinics in Brazil. METHODS: Multicentric, cross-sectional study performed among men attending STD clinics in Brazil. The study included STD clinics in six cities distributed throughout the five geographic regions of Brazil in 2005. Patients provided 20 ml of first catch urine for testing for NG and CT by DNA-PCR. RESULTS: A total of 767 (92.9% men were included in the study. The mean age was 26.5 (SD 8.3 years-old. Prevalence of Chlamydia infection was 13.1% (95%CI 10.7%-15.5% and gonorrhea was 18.4% (95%CI 15.7%-21.1%. Coinfection prevalence was 4.4% (95%CI 2.95%-5.85% in men who sought attendance in STI clinics. Factors identified as associated with C. trachomatis were younger age (15-24 [OR=1.4 (95%CI 1.01-1.91], present urethral discharge [OR=4.8 (95%CI 1.52-15.05], genital warts [OR=3.0 (95%CI 1.49-5.92] and previous history of urethral discharge [OR=2.4 (95%CI 1.11-5.18]. Variables associated with gonorrhea were younger age (15 to 24 [OR=1.5 (95%CI 1.09-2.05], presence of urethral discharge [OR=9.9 (95%CI 5.53-17.79], genital warts [OR=18.3 (95%CI 8.03-41.60] and ulcer present upon clinical examination [OR=4.9 (95%CI 1.06-22.73]. CONCLUSIONS: These findings have important implications for education and prevention actions directed toward men at risk of HIV/STD. A venue-based approach to offer routine screening for young men in STD clinics should be stimulated.INTRODUÇÃO: Nosso objetivo foi acessar a prevalência de Neisseria gonorrhoeae e Chlamydia trachomatis e identificar fatores demográficos, comportamentais e clínicos correlacionados a essas infecções em homens atendidos em clínicas de doenças sexualmente transmissíveis no Brasil. MÉTODOS: Estudo multicêntrico, transversal

  9. ALICE TRD results from prototype tests

    CERN Document Server

    Andronic, A; Blume, C; Braun-Munzinger, P; Bucher, D; Catanescu, G; Ciobanu, M; Daues, H W; Devismes, A; Finck, C; Herrmann, N; Lister, T A; Mahmoud, Tariq; Peitzmann, Thomas; Petrovici, M; Reygers, K; Santo, R; Schicker, R; Sedykha, S; Simon, R S; Stachel, J; Stelzer, H; Wessels, J P; Winkelmann, O; Windelband, B; Xu, C

    2002-01-01

    We present results from tests of a prototype of the TRD for the ALICE experiment at LHC. We investigate the performance-of different radiator types, composed of foils, fibres and foams. The pion rejection performance for different methods of analysis over a momentum range from 0.7 to 2 GeV/c is presented. (8 refs).

  10. Reproducibility of the results in nondestructive testing

    International Nuclear Information System (INIS)

    Launay, J.P.; Chalaye, H.; Thomas, A.

    1980-10-01

    Pressure vessels must comply with very severe safety criteria. In order to ensure that the required quality is attained, non destructive tests are used and these have to be highly reliable: magnetoscopy and liquid penetration for surface examinations, radiography and ultrasonics for voluminal examinations. In the case of ultrasonic examinations, a study of parameters has been made and a statistical analysis of the results has made it possible to calculate the dispersion due to the testing equipment [fr

  11. Safety assessment for the 118-B-1 Burial Ground excavation treatability tests. Revision 2

    International Nuclear Information System (INIS)

    Zimmer, J.J.; Frain, J.M.

    1994-12-01

    This revision of the Safety Assessment provides an auditable safety analysis of the hazards for the proposed treatability test activities per DOE-EM-STD-5502-94, DOE Limited Standard, Hazard Baseline Documentation (DOE 1994). The proposed activities are classified as radiological activities and as such, no longer require Operational Safety Limits (OSLs). The OSLS, Prudent Actions, and Institutional and Organization Controls have been removed from this revision and replaced with ''Administrative Actions Important to Safety,'' as determined by the hazards analysis. Those Administrative Actions Important to Safety are summarized in Section 1.1, ''Assessment Summary.''

  12. Temperature profile data from STD/CTD casts from the OCEANUS from the Atlantic Ocean during the International Decade of Ocean Exploration / combination of USSR POLYGON project and US MODE (IDOE/POLYMODE) project, 1978-06-06 to 1978-06-22 (NODC Accession 8200056)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, depth, salinity, and sigma-T data were collected using STD/CTD casts from OCEANUS in the Atlantic Ocean from June 6, 1978 to June 22, 1978. Data were...

  13. Evaluation of LLTR series II test A-7 results

    International Nuclear Information System (INIS)

    Knittle, D.E.; Amos, J.C.; Yang, T.M.

    1981-09-01

    This report evaluates the test A-7 data and assesses the capability of the analytical methodology (as a result of Series I program) to predict the thermal/hydraulic phenomena associated with a large SWR event occurring after the sodium system pressure has increased to near the rupture disc burst pressure due to a smaller size leak event. Evaluation of intertest examination data to determine the extent of test article damage resulting from test A-7 is also included

  14. Guidelines to Interpret Results of Mechanical Blade Test

    International Nuclear Information System (INIS)

    Arias Vega, F.; Sanz Martin, J. C.

    1999-01-01

    This report shows the interpretation of full scale rotor blade test results and describes the engineering testing models and coefficients for any feasible rotor blade design, in order to accept and to certify any final manufactured blade as an allowable product, fit for use and working with a completely security during all the wind turbines lifetime. This work was carried out at the Wind Energy Division of the CIEMAT.DER and it is based on the authors technical experience in this field, after many years working on testing blades. Also, this paper contains results of the European wind turbine Standards II relevant to the European Project: JOULE III R.D. where the Wind Energy Division took part as participant too. (Author)

  15. Guidelines to Interpret Results of Mechanical Blade Test

    Energy Technology Data Exchange (ETDEWEB)

    Arias Vega, F.; Sanz Martin, J. C. [Ciemat, Madrid (Spain)

    2000-07-01

    This report shows the interpretation of full scale rotor blade test results and describes the engineering testing models and coefficients for any feasible rotor blade design, in order to accept and to certify any final manufactured blades as an allowable product, fit for use and working with a completely security during all the windturbine's lifetime. This work was carried out at the Wind Energy Division of the CIEMAT.DER and it is based on the author's technical experience in this field, after many years working on testing blades. Also, this paper contains results of the European wind turbine Standards II relevant to the European Project: JOULE III R.D. where the Wind Energy Division took part as participant too. (Author)

  16. Pipe rupture test results; 6 in. pipe whip test under BWR LOCA conditions

    International Nuclear Information System (INIS)

    Kurihara, Ryoichi; Yano, Toshikazu; Ueda, Shuzo; Isozaki, Toshikuni; Miyazaki, Noriyuki; Kato, Rokuro; Miyazono, Shohachiro

    1983-02-01

    A series of pipe rupture tests has been performed in JAERI to demonstrate the safety of the primary coolant circuits in the event of pipe rupture, in nuclear power plants. The present report summarizes the results of 6 in. pipe whip tests (RUN 5605, 5606), under BWR LOCA conditions (285 0 C, 6.8 MPa), which were performed in August, 1981. The test pipe is made of Type 304 stainless steel and its outer diameter is 6 in. and its thickness is 11.1 mm. The restraints are made of Type 304 stainless steel and its diameter is 16.0 mm. Two restraints were set on the restraint support with clearance of 100 mm. Overhang length was varied as the parameter in these tests and was 300 mm or 700 mm. The following results are obtained. (1) The deformations of a pipe and restraints are limited effectively by shorter overhang length of 300. However, they become larger when the overhang length is 700 mm, and the pipe deforms especially at the setting point of restraints. (2) Velocity at the free end of pipe becomes about 30 m/sec just after the break. However, velocity at the setting point of restraint becomes about only 4 m/sec just after the break. (3) It seems from the comparison between the 4 in. tests and 6 in. tests that the maximum restraint force of 6 in. tests is about two times as large as that of 4 in. tests. (author)

  17. Temperature profile data from STD/CTD casts from the KNORR and other platforms from the Atlantic Ocean during the International Decade of Ocean Exploration / combination of USSR POLYGON project and US MODE (IDOE/POLYMODE) project, 1972-02-08 to 1975-12-20 (NODC Accession 7700831)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, conductivity, and salinity data were collected using STD/CTDs casts from KNORR and other platforms in the Atlantic Ocean from February 8, 1972 to...

  18. The Space Station Photovoltaic Panels Plasma Interaction Test Program: Test plan and results

    Science.gov (United States)

    Nahra, Henry K.; Felder, Marian C.; Sater, Bernard L.; Staskus, John V.

    1989-01-01

    The Plasma Interaction Test performed on two space station solar array panels is addressed. This includes a discussion of the test requirements, test plan, experimental set-up, and test results. It was found that parasitic current collection was insignificant (0.3 percent of the solar array delivered power). The measured arcing threshold ranged from -210 to -457 V with respect to the plasma potential. Furthermore, the dynamic response of the panels showed the panel time constant to range between 1 and 5 microsec, and the panel capacitance to be between .01 and .02 microF.

  19. The Space Station photovoltaic panels plasma interaction test program - Test plan and results

    Science.gov (United States)

    Nahra, Henry K.; Felder, Marian C.; Sater, Bernard L.; Staskus, John V.

    1990-01-01

    The plasma Interaction Test performed on two space station solar array panels is addressed. This includes a discussion of the test requirements, test plan, experimental set-up, and test results. It was found that parasitic current collection was insignificant (0.3 percent of the solar array delivered power). The measured arcing threshold ranged from -210 to -457 V with respect to the plasma potential. Furthermore, the dynamic response of the panels showed the panel time constant to range between 1 and 5 microsec, and the panel capacitance to be between .01 and .02 microF.

  20. Automotive RF immunity test set-up analysis : why test results can't compare

    NARCIS (Netherlands)

    Coenen, Mart; Pues, H.; Bousquet, T.

    2011-01-01

    Though the automotive RF emission and RF immunity requirements are highly justifiable, the application of those requirements in an non-intended manner leads to false conclusions and unnecessary redesigns for the electronics involved. When the test results become too dependent upon the test set-up

  1. Cyclonic valve test: preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, Andre Sampaio; Moraes, Carlos Alberto C.; Marins, Luiz Philipe M.; Soares, Fabricio; Oliveira, Dennis; Lima, Fabio Soares de; Airao, Vinicius [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil); Ton, Tijmen [Twister BV, Rijswijk (Netherlands)

    2012-07-01

    For many years, the petroleum industry has been developing a valve that input less shear to the flow for a given required pressure drop and this can be done using the cyclonic concept. This paper presents a comparison between the performances of a cyclonic valve (low shear) and a conventional globe valve. The aim of this work is to show the advantages of using a cyclonic low shear valve instead of the commonly used in the primary separation process by PETROBRAS. Tests were performed at PETROBRAS Experimental Center (NUEX) in Aracaju/SE varying some parameters: water cut; pressure loss (from 4 kgf/cm2 to 10 kgf/cm2); flow rates (30 m3/h and 45 m3/h). Results indicates a better performance of the cyclonic valve, if compared with a conventional one, and also that the difference of the performance, is a function of several parameters (emulsion stability, water content free, and oil properties). The cyclonic valve tested can be applied as a choke valve, as a valve between separation stages (for pressure drop), or for controlling the level of vessels. We must emphasize the importance to avoid the high shear imposed by conventional valves, because once the emulsion is created, it becomes more difficult to break it. New tests are being planned to occur in 2012, but PETROBRAS is also analyzing real cases where the applications could increase the primary process efficiency. In the same way, the future installations are also being designed considering the cyclonic valve usage. (author)

  2. The boundary-scan handbook

    CERN Document Server

    Parker, Kenneth P

    2016-01-01

    Aimed at electronics industry professionals, this 4th edition of the Boundary Scan Handbook describes recent changes to the IEEE1149.1 Standard Test Access Port and Boundary-Scan Architecture. This updated edition features new chapters on the possible effects of the changes on the work of the practicing test engineers and the new 1149.8.1 standard. Anyone needing to understand the basics of boundary scan and its practical industrial implementation will need this book. Provides an overview of the recent changes to the 1149.1 standard and the effect of the changes on the work of test engineers;   Explains the new IEEE 1149.8.1 subsidiary standard and applications;   Describes the latest updates on the supplementary IEEE testing standards. In particular, addresses: IEEE Std 1149.1                      Digital Boundary-Scan IEEE Std 1149.4                      Analog Boundary-Scan IEEE Std 1149.6                      Advanced I/O Testing IEEE Std 1149.8.1           �...

  3. Small-Scale Spray Releases: Additional Aerosol Test Results

    Energy Technology Data Exchange (ETDEWEB)

    Schonewill, Philip P.; Gauglitz, Phillip A.; Kimura, Marcia L.; Brown, G. N.; Mahoney, Lenna A.; Tran, Diana N.; Burns, Carolyn A.; Kurath, Dean E.

    2013-08-01

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and across processing facilities in the DOE complex. To expand the data set upon which the WTP accident and safety analyses were based, an aerosol spray leak testing program was conducted by Pacific Northwest National Laboratory (PNNL). PNNL’s test program addressed two key technical areas to improve the WTP methodology (Larson and Allen 2010). The first technical area was to quantify the role of slurry particles in small breaches where slurry particles may plug the hole and prevent high-pressure sprays. The results from an effort to address this first technical area can be found in Mahoney et al. (2012a). The second technical area was to determine aerosol droplet size distribution and total droplet volume from prototypic breaches and fluids, including sprays from larger breaches and sprays of slurries for which literature data are largely absent. To address the second technical area, the testing program collected aerosol generation data at two scales, commonly referred to as small-scale and large-scale. The small-scale testing and resultant data are described in Mahoney et al. (2012b) and the large-scale testing and resultant data are presented in Schonewill et al. (2012). In tests at both scales, simulants were used to mimic the

  4. Assessment of the quality of test results from selected civil engineering material testing laboratories in Tanzania

    CSIR Research Space (South Africa)

    Mbawala, SJ

    2017-12-01

    Full Text Available Civil and geotechnical engineering material testing laboratories are expected to produce accurate and reliable test results. However, the ability of laboratories to produce accurate and reliable test results depends on many factors, among others...

  5. Test Results for CSTR Test 4

    International Nuclear Information System (INIS)

    Lee, D.D.

    2001-01-01

    One of the 3 technologies currently being developed for the Savannah River Salt Waste Processing Program is the Small-Tank Tetraphenylborate Process (STTP). This process uses sodium tetraphenylborate to precipitate and remove radioactive Cs from the waste and monosodium titanate to sorb and remove radioactive Sr and actinides. ORNL is demonstrating this process at the 1:4000 scale using a 20-liter continuous-flow stirred tank reactor (CSTR) system. The primary goal of Test 4 was to verify that the STTP process could achieve and maintain the necessary Cs decontamination while TPB was actively decomposing. Even with TPB being decomposed by the off-normal conditions of this test, the decontaimination factor for 137 Cs obtained for the filtrate from the Slurry Concentrating Tank ranged from 47,000 to 646,000, exceeding the WAC standard

  6. Relationship between substances in seminal plasma and Acrobeads Test results.

    Science.gov (United States)

    Komori, Kazuhiko; Tsujimura, Akira; Okamoto, Yoshio; Matsuoka, Yasuhiro; Takao, Tetsuya; Miyagawa, Yasushi; Takada, Shingo; Nonomura, Norio; Okuyama, Akihiko

    2009-01-01

    To asses the effects of seminal plasma on sperm function. Retrospective case-control study. University hospital. One hundred fourteen infertile men. Acrobeads Test scores (0-4) and measurement of interleukin (IL)-6, soluble IL-6 receptor, epidermal growth factor, insulin-like growth factor-I (IGF-I), transforming growth factor-beta I, superoxide dismutase, calcitonin, and macrophage migration inhibitory factor (MIF) levels in seminal plasma. Kruskal-Wallis test to compare the concentrations of substances as a nonparametric test for differences among Acrobeads Test scores and a multivariable logistic regression model to find independent risk factors associated with abnormal Acrobeads Test results. The Acrobeads Test score was 0 for 7 samples, 1 for 20 samples, 2 for 18 samples, 3 for 28 samples, and 4 for 41 samples. Age, abstinence period, and semen parameters, except for sperm motility and percentage of sperm with abnormal morphology, had no effect on the Acrobeads Test results. Concentrations of IGF-I and MIF were significantly higher in patients with abnormal Acrobeads Test results. Multivariate analysis indicated that MIF and IGF-I were significantly associated with abnormal Acrobeads Test results (scores 0 to 1). Although further studies are needed, IGF-I and MIF in seminal plasma may have negative effects on sperm function.

  7. Interim results from UO2 fuel oxidation tests in air

    International Nuclear Information System (INIS)

    Campbell, T.K.; Gilbert, E.R.; Thornhill, C.K.; White, G.D.; Piepel, G.F.; Griffin, C.W.j.

    1987-08-01

    An experimental program is being conducted at Pacific Northwest Laboratory (PNL) to extend the characterization of spent fuel oxidation in air. To characterize oxidation behavior of irradiated UO 2 , fuel oxidation tests were performed on declad light-water reactor spent fuel and nonirradited UO 2 pellets in the temperature range of 135 to 250 0 C. These tests were designed to determine the important independent variables that might affect spent fuel oxidation behavior. The data from this program, when combined with the test results from other programs, will be used to develop recommended spent fuel dry-storage temperature limits in air. This report describes interim test results. The initial PNL investigations of nonirradiated and spent fuels identified the important testing variables as temperature, fuel burnup, radiolysis of the air, fuel microstructure, and moisture in the air. Based on these initial results, a more extensive statistically designed test matrix was developed to study the effects of temperature, burnup, and moisture on the oxidation behavior of spent fuel. Oxidation tests were initiated using both boiling-water reactor and pressurized-water reactor fuels from several different reactors with burnups from 8 to 34 GWd/MTU. A 10 5 R/h gamma field was applied to the test ovens to simulate dry storage cask conditions. Nonirradiated fuel was included as a control. This report describes experimental results from the initial tests on both the spent and nonirradiated fuels and results to date on the tests in a 10 5 R/h gamma field. 33 refs., 51 figs., 6 tabs

  8. Integrated leak rate test results of JOYO reactor containment vessel

    International Nuclear Information System (INIS)

    Tamura, M.; Endo, J.

    1982-02-01

    Integrated leak rate tests of JOYO after the reactor coolant system had been filled with sodium have been performed two times since 1978 (February 1978 and December 1979). The tests were conducted with the in-containment sodium systems, primary argon cover gas system and air conditioning systems operating. Both the absolute pressure method and the reference chamber method were employed during the test. The results of both tests confirmed the functioning of the containment vessel, and leak rate limits were satisfied. In Addition, the adequancy of the test instrumentation system and the test method was demonstrated. Finally the plant conditions required to maintain reasonable accuracy for the leak rate testing of LMFBR were established. In this paper, the test conditions and the test results are described. (author)

  9. [Knowledge, attitudes and practices related to STD and HIV/AIDS: men having sex with men in Senegal].

    Science.gov (United States)

    Ndiaye, P; Fall, A; Tal-Dia, A; Faye, A; Diongue, M

    2011-10-01

    This study aimed to review knowledge, attitudes and practices related to sexual transmitted diseases (STD) and HIV/AIDS among men who have sex with men (MSM) in Senegal. The study was undertaken from February 1st to June 30th 2007, in three capitals cities in Senegal (one national, and two regional). It concerned the MSM that benefited from at least one of services of an MSM association. Studied variables included socio demographic characteristics, sexual practices, as well as knowledge and attitudes related to STDs and VIH/AIDS. Interviews took place during appointments obtained by direct phone call or by two MSM leaders intermediary. Data were seized and analyzed with Epi2000 Software. Among 245 registered MSM, 63 had a precise contact (address and/or phone number), and 49 aged in average of 25 years were investigated. Among them, one was illiterate, five studied Koran, seven Arab and 36 French. The socio-professional categories differentiated two officials, two merchants, one mechanic, one fighter, five artists, five restorers, seven tailors, 11 students, and 15 unemployed. The associations, to which 35 HSH belonged, were related to sexuality (66%), religion (20%), social matters (8%) and economy (6%). Sexual habits, according to anal intercourse, differentiated the "Ubbi" or receptive/passive (57%), the "Yoos" or incertif/active (25%), the "Ubbi/Yoos" who play the two roles (14%) and the "neitherUbbi/norYoos" who had other practices than anal (4%). Practices between men, concerned mutual strokes (100%), fellatio (61%) and anal intercourse (49%), counted 45% for remuneration, 35% of multi-unprotected partnership, and 12% of breaking condom. Practices with women were reported by 15 MSM (31%). Concerning STDs, at least one sign was reported by 43 MSM, one transmission way by 42, one mean of protection by 47; and the first recourse was a health system for 36 MSM. The test of HIV/AIDS screening was done by 38 HSH among which 30 withdrew the results. The "Ubby

  10. Test results of the SMES model coil. Pulse performance

    International Nuclear Information System (INIS)

    Hamajima, Takataro; Shimada, Mamoru; Ono, Michitaka

    1998-01-01

    A model coil for superconducting magnetic energy storage (SMES model coil) has been developed to establish the component technologies needed for a small-scale 100 kWh SMES device. The SMES model coil was fabricated, and then performance tests were carried out in 1996. The coil was successfully charged up to around 30 kA and down to zero at the same ramp rate of magnetic field experienced in a 100 kWh SMES device. AC loss in the coil was measured by an enthalpy method as parameters of ramp rate and flat top current. The results were evaluated by an analysis and compared with short-sample test results. The measured hysteresis loss is in good agreement with that estimated from the short-sample results. It was found that the coupling loss of the coil consists of two major coupling time constants. One is a short time constant of about 200 ms, which is in agreement with the test results of a short real conductor. The other is a long time constant of about 30 s, which could not be expected from the short sample test results. (author)

  11. Development of 30-pin connectors for electronic modules of C and I systems for NPP's confirming to customized MIL STD-1344 requirements

    International Nuclear Information System (INIS)

    Marathe, P.P.; Madala, Kalyan C.; Ramakrishna, P.

    2014-01-01

    The electrical connectors form an important constituent of C and I system where customized circuits and hardware is required to be configured meeting the Nuclear Power Plant regulatory requirements. C and I hardware has to handle multiple hundreds of I/O's and the system architectures are made in modular construction having C and I system hardware packaged in plug-in electronic modules in the required form factors. In addition if the system has to satisfy customized JSS 55555 requirements meeting stringent shock, vibration and environmental specifications, the connectors used for the electronic modules shall meet the customized MIL STD-1344 requirements and meet reliability target for the system. 30-pin type special connectors for electronic modules and 2x30 (60) pin field cabling connectors were developed meeting the required qualification specifications. (author)

  12. Thermal results of the Japanese LCT coil's domestic test

    International Nuclear Information System (INIS)

    Tada, Eisuke; Hiyama, Tadao; Kato, Takashi; Takahashi, Osamu; Shimamoto, Susumu

    1984-01-01

    This paper describes thermal results obtained in the domestic test of the Japanese LCT coil which was constructed at the Japan Atomic Energy Research Institute (JAERI) in order to develop large superconducting coils for fusion in international collaboration proposed by the IEA. The domestic test was carried out from May 13 to June 17 in 1982 by using the test facility named as SETF (Superconducting Engineering Test Facility) which was composed of a 350-l/h helium cryogenic system, a vacuum system, a 30 KA-DC power supply and protection system, and a PDP-11/70 computer system. The cool-down characteristics, heat load, fast discharge characteristics, stability, and warm-up characteristics of the LCT coil were successfully measured in the test. The details of thermal test results acquired in the cool-down, heat load measurement, fast discharge, and warm-up, and the comparison between measurements and calculations are described in this paper. (author)

  13. Recent test results on the ATLAS SCT detector

    International Nuclear Information System (INIS)

    Pernegger, H.

    2003-01-01

    The ATLAS Semiconductor Tracker (SCT) will be a central part of the tracking system of the ATLAS experiment. The SCT, which is currently under construction, will consist of four concentric barrels of silicon detectors as well as two silicon endcap detectors formed by nine disks each. After an overview of the SCT and the detector module layout, the paper will summarize recent test results obtained from silicon detector modules, which have been extensively tested before starting their large series production. The tests presented here cover electrical performance of individual modules, their performance after irradiation, as well as system tests in a multi-module setup

  14. AOF: standalone test results of GALACSI

    Science.gov (United States)

    La Penna, P.; Aller Carpentier, E.; Argomedo, J.; Arsenault, R.; Conzelmann, R. D.; Delabre, B.; Donaldson, R.; Gago, F.; Gutierrez-Cheetam, P.; Hubin, N.; Jolley, P.; Kiekebusch, M.; Kirchbauer, J. P.; Klein, B.; Kolb, J.; Kuntschner, H.; Le Louarn, M.; Lizon, J.-L.; Madec, P.-Y.; Manescau, A.; Mehrgan, L.; Oberti, S.; Quentin, J.; Sedghi, B.; Ströbele, S.; Suárez Valles, M.; Soenke, C.; Tordo, S.; Vernet, J.

    2016-07-01

    GALACSI is the Adaptive Optics (AO) module that will serve the MUSE Integral Field Spectrograph. In Wide Field Mode it will enhance the collected energy in a 0.2"×0.2" pixel by a factor 2 at 750 nm over a Field of View (FoV) of 1'×1' using the Ground Layer AO (GLAO) technique. In Narrow Field Mode, it will provide a Strehl Ratio of 5% (goal 10%) at 650 nm, but in a smaller FoV (7.5"×7.5" FoV), using Laser Tomography AO (LTAO). Before being ready for shipping to Paranal, the system has gone through an extensive testing phase in Europe, first in standalone mode and then in closed loop with the DSM in Europe. After outlining the technical features of the system, we describe here the first part of that testing phase and the integration with the AOF ASSIST (Adaptive Secondary Setup and Instrument Stimulator) testbench, including a specific adapter for the IRLOS truth sensor. The procedures for the standalone verification of the main system performances are outlined, and the results of the internal functional tests of GALACSI after full integration and alignment on ASSIST are presented.

  15. New test methods for BIPV. Results from IP performance

    International Nuclear Information System (INIS)

    Jol, J.C.; Van Kampen, B.J.M.; De Boer, B.J.; Reil, F.; Geyer, D.

    2009-11-01

    Within the Performance project new test procedures for PV building products and the building performance as a whole when PV is applied in buildings have been drafted. It has resulted in a first draft of new test procedures for PV building products and proposals for tests for novel BIPV technology like thin film. The test proposed are a module breakage test for BIPV products, a fire safety test for BIPV products and a dynamic load test for BIPV products. Furthermore first proposals of how flexible PV modules could be tested in an appropriate way to ensure long time quality and safety of these new products are presented.

  16. Physical separations soil washing system cold test results

    Energy Technology Data Exchange (ETDEWEB)

    McGuire, J.P.

    1993-07-28

    This test summary describes the objectives, methodology, and results of a physical separations soil-washing system setup and shakedown test using uncontaminated soil. The test is being conducted in preparation for a treatability test to be conducted in the North Pond of the 300-FF-1 Operable Unit. It will be used to assess the feasibility of using a physical separations process to reduce the volume of contaminated soils in the 300-FF-1 Operable Unit. The test is described in DOE-RL (1993). The setup test was conducted at an uncontrolled area located approximately 3.2 km northwest of the 300-FF-1 Operable Unit. The material processed was free of contamination. The physical separation equipment to be used in the test was transferred to the US Department of Energy (DOE) by the US Environmental Protection Agency (EPA) Risk Reduction Engineering Laboratory. On May 13, 1993, soil-washing equipment was moved to the cold test location. Design assistance and recommendation for operation was provided by the EPA.

  17. Cement/bentonite interaction. Results from 16 month laboratory tests

    Energy Technology Data Exchange (ETDEWEB)

    Karnland, O. [Clay Technology AB, Lund (Sweden)

    1997-12-01

    The work concerns possible bentonite clay mineral alteration in constructions with bentonite in close contact with cement, and the effect of such changes on bentonite buffer properties. The investigation comprises a 16 months laboratory test series with hydrothermal cell tests, percolation tests and diffusion tests. MX-80 Wyoming bentonite was used in all tests. Two types of artificial cement pore water solutions were used in the percolation and diffusion tests. The swelling pressure and the hydraulic conductivity were measured continuously in the percolation tests. After termination, the clay was analyzed with respect to changes in element distribution, mineralogy and shear strength. The water solutions were analyzed with respect to pH, cations and major anions. The results concerning chemical and mineralogical changes are in summary: Ion exchange in the montmorillonite until equilibrium with cement pore-water ions was reached; Increase in cation exchange capacity; Dissolution of original cristobalite; Increase in quartz content; Minor increase in illite content; Minor formation of chlorite; Formation of CSH(I); Wash away of CSH-gel into surrounding water. A large decrease in swelling pressure and a moderate increase in hydraulic conductivity were recorded in the samples percolated by SULFACEM pore-water solution. The mineralogical alterations only concerned a minor part of the total bentonite mass and the changes in physical properties were therefore most likely due to the replacement of the original charge balancing cation by cement pore-water cations. Comparisons between the current test result and results from 4 month tests indicate that the rates of illite and chlorite formation were reduced during the tests. The presence of zeolites in the clay could not be ensured. However, the discovery of CSH material is important since CSH is expected to precede the formation of zeolites 5 refs, 48 figs, 11 tabs

  18. RSG Deployment Case Testing Results

    Energy Technology Data Exchange (ETDEWEB)

    Owsley, Stanley L.; Dodson, Michael G.; Hatchell, Brian K.; Seim, Thomas A.; Alexander, David L.; Hawthorne, Woodrow T.

    2005-09-01

    The RSG deployment case design is centered on taking the RSG system and producing a transport case that houses the RSG in a safe and controlled manner for transport. The transport case was driven by two conflicting constraints, first that the case be as light as possible, and second that it meet a stringent list of Military Specified requirements. The design team worked to extract every bit of weight from the design while striving to meet the rigorous Mil-Spec constraints. In the end compromises were made primarily on the specification side to control the overall weight of the transport case. This report outlines the case testing results.

  19. [Diagnosis and treatment of STDs].

    Science.gov (United States)

    Latif, A

    1995-07-01

    Even though laboratory tests can easily diagnose sexually transmitted diseases (STDs), they require expensive, sophisticated equipment, which is lacking in many countries, and they take several days to obtain the results. In most cases, these tests require a sample for culture or the patient must be transferred to a hospital or an STD treatment center. Often patients do not want to return for test results or for treatment or they refuse to be transferred to another health facility. Thus, the STD goes untreated. The syndromic approach addresses these obstacles to STD diagnosis and treatment at the primary health care level. Nurses, midwives, health assistants, and clinical personnel undergo training in order to be able to diagnose and treat STDs during the first visit, at a reasonable cost, and without lab tests. They identify principal groups of signs and symptoms (i.e., syndromes) common to certain STDs. Prescribed drugs must be effective, cause no side effects, be available at the same center as the first consultation, and, preferably, be administered orally or by one dose. STD control programs need to identify the most prevalent syndromes and etiologic agents in the area and determine the most effective antibiotics for those syndromes. Donovanosis, syphilis, and soft chancre are responsible for genital ulcers in India and in Papua New Guinea; only syphilis and soft chancre are in other areas. Thus, it is important to provide treatment for all three causes in India and Papua New Guinea. It is easier to diagnose and treat penal discharge and genital ulcers in men and women than vaginal discharge and/or symptoms of pelvic inflammation in women. Thus, health workers need to ask a series of questions on risk factors for gonorrhea and chlamydia.

  20. Influence of test conditions and exposure duration on the result of ecotoxicological tests

    DEFF Research Database (Denmark)

    Rosenkrantz, Rikke Tjørnhøj

    be calculated from results of ecotoxicological tests performed according to internationally approved guidelines, such as from the Organisation for Economic Co-operation and Development (OECD) or International Standardization Organisation (ISO). Such guidelines were originally developed to enable classification......H and exposure duration on the toxicity recorded in tests using four sulfonylurea herbicides (SUs) and the aquatic macrophyte Lemna gibba as study objects. The study showed that changing the physical and chemical test conditions influenced the toxicity of sulfonylurea herbicides towards L. gibba. Lowering...

  1. How do people respond to self-test results? A cross-sectional survey

    Directory of Open Access Journals (Sweden)

    de Vries Nanne K

    2010-10-01

    Full Text Available Abstract Background Self-tests, tests on medical conditions that can be performed by consumers without consulting a doctor first, are frequently used. Nevertheless, there are concerns about the safety of self-testing, as it may delay diagnosis and appropriate treatment in the case of inappropriate use of the test, or false-negative results. It is unclear whether self-tests stimulate appropriate follow-up behaviour. Our aim was to examine the frequency of self-test use, consumers' response to self-test results in terms of their confidence in the result, reassurance by the test result, and follow-up behaviour. Methods A two step cross-sectional survey was designed. A random sample of 6700 Internet users in an existing Internet panel received an online questionnaire on the use of self-tests. Self-tests were defined as tests on body materials, initiated by consumers with the aim to diagnose a disease or risk factor. A second questionnaire on consumers' response to self-test results was sent to the respondents that were identified as a self-tester in the first questionnaire (n = 703. Results 18.1% (799/4416 of the respondents had ever performed a self-test, the most frequently used tests being those for diabetes (5.3%, kidney disease (4.9%, cholesterol (4.5%, urinary tract infection (1.9% and HIV/AIDS and Chlamydia (both 1.6%. A total of 78.1% of the testers with a normal test result and 81.4% of those with an abnormal result reported confidence in this result. Almost all (95.6% of the testers with a normal result felt reassured. After a normal result, 78.1% did not take any further action and 5.8% consulted a doctor. The corresponding figures after an abnormal test result were 9.3% and 72.2%, respectively. Conclusions Respondents who had performed a self-test seemed to base their follow-up behaviour on the result of the test. They had confidence in the test result, and were often reassured by a normal result. After an abnormal result, most self

  2. Cone Penetrometer N Factor Determination Testing Results

    Energy Technology Data Exchange (ETDEWEB)

    Follett, Jordan R.

    2014-03-05

    This document contains the results of testing activities to determine the empirical 'N Factor' for the cone penetrometer in kaolin clay simulant. The N Factor is used to releate resistance measurements taken with the cone penetrometer to shear strength.

  3. SLD liquid argon calorimeter prototype test results

    International Nuclear Information System (INIS)

    Dubois, R.; Eigen, G.; Au, Y.

    1985-10-01

    The results of the SLD test beam program for the selection of a calorimeter radiator composition within a liquid argon system are described, with emphasis on the study of the use of uranium to obtain equalization of pion and electron responses

  4. Results of Detailed Hydrologic Characterization Tests - Fiscal Year 2000

    International Nuclear Information System (INIS)

    Spane, Frank A; Thorne, Paul D; Newcomer, Darrell R

    2001-01-01

    This report provides the results of detailed hydrologic characterization tests conducted within eleven Hanford Site wells during fiscal year 2000. Detailed characterization tests performed included groundwater-flow characterization; barometric response evaluation; slug tests; single-well tracer tests; constant-rate pumping tests; and in-well, vertical flow tests. Hydraulic property estimates obtained from the detailed hydrologic tests include transmissivity; hydraulic conductivity; specific yield; effective porosity; in-well, lateral flow velocity; aquifer-flow velocity; vertical distribution of hydraulic conductivity (within the well-screen section); and in-well, vertical flow velocity. In addition, local groundwater-flow characteristics (i.e., hydraulic gradient and flow direction) were determined for four sites where detailed well testing was performed

  5. Mobile phone applications for the care and prevention of HIV and other sexually transmitted diseases: a review.

    Science.gov (United States)

    Muessig, Kathryn E; Pike, Emily C; Legrand, Sara; Hightow-Weidman, Lisa B

    2013-01-04

    Mobile phone applications (apps) provide a new platform for delivering tailored human immunodeficiency virus (HIV) and sexually transmitted disease (STD) prevention and care. To identify and evaluate currently available mobile phone apps related to the prevention and care of HIV and other STDs. We searched the Apple iTunes and Android Google Play stores for HIV/STD-related apps, excluding apps that exclusively targeted industry, providers, and researchers. Each eligible app was downloaded, tested, and assessed for user ratings and functionality as well as 6 broad content areas of HIV prevention and care: HIV/STD disease knowledge, risk reduction/safer sex, condom promotion, HIV/STD testing information, resources for HIV-positive persons, and focus on key populations. Search queries up to May 2012 identified 1937 apps. Of these, 55 unique apps met the inclusion criteria (12 for Android, 29 for iPhone, and 14 for both platforms). Among these apps, 71% provided disease information about HIV/STDs, 36% provided HIV/STD testing information or resources, 29% included information about condom use or assistance locating condoms, and 24% promoted safer sex. Only 6 apps (11%) covered all 4 of these prevention areas. Eight apps (15%) provided tools or resources specifically for HIV/STD positive persons. Ten apps included information for a range of sexual orientations, 9 apps appeared to be designed for racially/ethnically diverse audiences, and 15 apps featured interactive components. Apps were infrequently downloaded (median 100-500 downloads) and not highly rated (average customer rating 3.7 out of 5 stars). Most available HIV/STD apps have failed to attract user attention and positive reviews. Public health practitioners should work with app developers to incorporate elements of evidence-based interventions for risk reduction and improve app inclusiveness and interactivity.

  6. IEEE Standard for qualification of Class 1E lead storage batteries for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    This document describes qualification methods for Class 1E lead storage batteries and racks to be used in nuclear power generating stations outside of primary containment. Qualification required in ANSI/IEEE Std 279-1979 and IEEE Std 308-1978, can be demonstrated by using the procedures provided in this Standard in accordance with IEEE Std 323-1974. Battery sizing, maintenance, capacity testing, installation, charging equipment and consideration of other types batteries are beyond the scope of this Standard

  7. Automated Testing Infrastructure and Result Comparison for Geodynamics Codes

    Science.gov (United States)

    Heien, E. M.; Kellogg, L. H.

    2013-12-01

    The geodynamics community uses a wide variety of codes on a wide variety of both software and hardware platforms to simulate geophysical phenomenon. These codes are generally variants of finite difference or finite element calculations involving Stokes flow or wave propagation. A significant problem is that codes of even low complexity will return different results depending on the platform due to slight differences in hardware, software, compiler, and libraries. Furthermore, changes to the codes during development may affect solutions in unexpected ways such that previously validated results are altered. The Computational Infrastructure for Geodynamics (CIG) is funded by the NSF to enhance the capabilities of the geodynamics community through software development. CIG has recently done extensive work in setting up an automated testing and result validation system based on the BaTLab system developed at the University of Wisconsin, Madison. This system uses 16 variants of Linux and Mac platforms on both 32 and 64-bit processors to test several CIG codes, and has also recently been extended to support testing on the XSEDE TACC (Texas Advanced Computing Center) Stampede cluster. In this work we overview the system design and demonstrate how automated testing and validation occurs and results are reported. We also examine several results from the system from different codes and discuss how changes in compilers and libraries affect the results. Finally we detail some result comparison tools for different types of output (scalar fields, velocity fields, seismogram data), and discuss within what margins different results can be considered equivalent.

  8. HIV seroprevalence in various high risk groups at Jaipur

    Directory of Open Access Journals (Sweden)

    Narayan Raj

    1994-01-01

    Full Text Available 100 patients of STD were subjected to HIV testing and this included cases of genital warts, chancroid, shyphilis, genital herpes, balanoposthitis and gonorrhoea. 5% cases were positive for antibodies by ELISA/particle agglutination test and all were confirmed by W.B. test. 25 prostitutes showed 28% positivity for antibodies to HIV. This is an alarming fact and more stress for HIV positivity to be given in STD patients and prostitutes.

  9. COMPARISON OF RESULTS OF THERMAL TESTS OF BALCONY DOORS

    Directory of Open Access Journals (Sweden)

    Golubev Stanislav Sergeevich

    2012-10-01

    Full Text Available Results of thermal tests of balcony doors are presented in the article. In the course of the research project, two types of doors were tested. The first type represents a PVC frame door (width 82 mm; it has a triple glazing (4K-16Ar-4-16Ar-K4; its blank part represents a polystyrene sandwich panel (width 40 mm. The second type represents a PVC frame door (width 82 mm, that has a triple glazing (4K-16Ar-4-16Ar-K4 and composite PVC panels. The testing procedure and processing results are described in the article. The test has demonstrated that the thermal resistance value of the balcony door of the first type exceeds the thermal resistance value of the balcony door of the second type.

  10. Field Lysimeter Test Facility: Second year (FY 1989) test results

    International Nuclear Information System (INIS)

    Campbell, M.D.; Gee, G.W.; Kanyid, M.J.; Rockhold, M.L.

    1990-04-01

    The Record of Decision associated with the Hanford Defense Waste Environmental Impact Statement (53 FR 12449-53) commits to an evaluation of the use of protective barriers placed over near-surface wastes. The barrier must protect against wind and water erosion and limit plant and animal intrusion and infiltration of water. Successful conclusion of this program will yield the necessary protective barrier design for near-surface waste isolation. This report presents results from the second year of tests at the FLTF. The primary objective of testing protective barriers at the FLTF was to measure the water budgets within the various barriers and assess the effectiveness of their designs in limiting water intrusion into the zone beneath each barrier. Information obtained from these measurements is intended for use in refining barrier designs. Four elements of water budget were measured during the year: precipitation, evaporation, storage, and drainage. Run-off, which is a fifth element of a complete water budget, was made negligible by a lip on the lysimeters that protrudes 5 cm above the soil surface to prevent run-off. A secondary objective of testing protective barriers at the FLTF was to refine procedures and equipment to support data collection for verification of the computer model needed for long-term projections of barrier performance. 6 refs

  11. A prototype tap test imaging system: Initial field test results

    Science.gov (United States)

    Peters, J. J.; Barnard, D. J.; Hudelson, N. A.; Simpson, T. S.; Hsu, D. K.

    2000-05-01

    This paper describes a simple, field-worthy tap test imaging system that gives quantitative information about the size, shape, and severity of defects and damages. The system consists of an accelerometer, electronic circuits for conditioning the signal and measuring the impact duration, a laptop PC and data acquisition and processing software. The images are generated manually by tapping on a grid printed on a plastic sheet laid over the part's surface. A mechanized scanner is currently under development. The prototype has produced images for a variety of aircraft composite and metal honeycomb structures containing flaws, damages, and repairs. Images of the local contact stiffness, deduced from the impact duration using a spring model, revealed quantitatively the stiffness reduction due to flaws and damages, as well as the stiffness enhancement due to substructures. The system has been field tested on commercial and military aircraft as well as rotor blades and engine decks on helicopters. Field test results will be shown and the operation of the system will be demonstrated.—This material is based upon work supported by the Federal Aviation Administration under Contract #DTFA03-98-D-00008, Delivery Order No. IA016 and performed at Iowa State University's Center for NDE as part of the Center for Aviation Systems Reliability program.

  12. Spent fuel drying system test results (first dry-run)

    International Nuclear Information System (INIS)

    Klinger, G.S.; Oliver, B.M.; Abrefah, J.; Marschman, S.C.; MacFarlan, P.J.; Ritter, G.A.

    1998-07-01

    The water-filled K-Basins in the Hanford 100 Area have been used to store N-Reactor spent nuclear fuel (SNF) since the 1970s. Because some leaks in the basin have been detected and some of the fuel is breached due to handling damage and corrosion, efforts are underway to remove the fuel elements from wet storage. An Integrated Process Strategy (IPS) has been developed to package, dry, transport, and store these metallic uranium fuel elements in an interim storage facility on the Hanford Site. Information required to support the development of the drying processes, and the required safety analyses, is being obtained from characterization tests conducted on fuel elements removed from the K-Basins. A series of whole element drying tests (reported in separate documents, see Section 7.0) have been conducted by Pacific Northwest National Laboratory (PNNL) on several intact and damaged fuel elements recovered from both the K-East and K-West Basins. This report documents the results of the first dry-run test, which was conducted without a fuel element. The empty test apparatus was subjected to a combination of low- and high-temperature vacuum drying treatments that were intended to mimic, wherever possible, the fuel treatment strategies of the IPS. The data from this dry-run test can serve as a baseline for the first two fuel element tests, 1990 (Run 1) and 3128W (Run 2). The purpose of this dry-run was to establish the background levels of hydrogen in the system, and the hydrogen generation and release characteristics attributable to the test system without a fuel element present. This test also serves to establish the background levels of water in the system and the water release characteristics. The system used for the drying test series was the Whole Element Furnace Testing System, described in Section 2.0, which is located in the Postirradiation Testing Laboratory (PTL, 327 Building). The test conditions and methodology are given in section 3.0, and the experimental

  13. Results and Analysis from Space Suit Joint Torque Testing

    Science.gov (United States)

    Matty, Jennifer

    2010-01-01

    This joint mobility KC lecture included information from two papers, "A Method for and Issues Associated with the Determination of Space Suit Joint Requirements" and "Results and Analysis from Space Suit Joint Torque Testing," as presented for the International Conference on Environmental Systems in 2009 and 2010, respectively. The first paper discusses historical joint torque testing methodologies and approaches that were tested in 2008 and 2009. The second paper discusses the testing that was completed in 2009 and 2010.

  14. Results from the 2013 drug and alcohol testing survey.

    Science.gov (United States)

    2015-12-01

    This report summarizes the results of the 2013 Federal Motor Carrier Safety Administration (FMCSA) Drug and Alcohol Testing Survey. This annual survey measures the percentage of drivers with commercial drivers licenses (CDLs) that test positive fo...

  15. Results from the 2008 Drug and Alcohol Testing Survey

    Science.gov (United States)

    2010-01-01

    This report summarizes the results of the 2008 Federal Motor Carrier Safety Administration Drug and Alcohol Testing Survey. This annual survey measures the percentage of drivers with commercial drivers licenses who test positive for controlled sub...

  16. Construction details and test results from RHIC sextupoles

    International Nuclear Information System (INIS)

    Lindner, M.; Anerella, M.; Ganetis, G.

    1993-01-01

    Four 8 cm aperture sextupoles have been built at BNL to verify the magnetic performance of this magnet in the RHIC installation. Two significantly different mechanical configurations have been designed, and two magnets of each design have been built, and successfully tested, and have exceeded the required minimum quench current by a substantial margin. This report describes the assembly details of the second configuration, which is the final production configuration. In addition the first industry built production sextupole has been delivered and tested. This report presents the results of quench tests on all 5 magnets and field measurements on the first production sextupole

  17. School results and access test results as indicators of first-year performance at university

    Directory of Open Access Journals (Sweden)

    A Bothma

    2004-06-01

    Full Text Available The goals set by the National Plan for Higher Education, the fact that many schools are still severely disadvantaged as well as far-reaching changes in the school system demand that South African universities urgently reconsider their admission procedures. Redesigning admission procedures calls for a thorough understanding of the interrelationships between school marks, results in existing access tests and first-year university performance. These interrelationships were statistically investigated in the case of the 1999, 2000 and 2001 intake groups, who were compelled to write access tests before being admitted to Stellenbosch University. The results of this investigation confirm an alarming degree of unpreparedness among many prospective students regarding what is expected of them at university. This is aggravated by school marks creating a totally unrealistic expectation of performance in the first year at university. It is emphasised that schools and authorities dealing with admission of prospective students at universities should be cognisant of the findings reported here. Furthermore, the statistical analyses demonstrate several novel techniques for investigating the interrelationship between school marks, access test results and university performance.

  18. Long Term Corrosion/Degradation Test Six Year Results

    Energy Technology Data Exchange (ETDEWEB)

    M. K. Adler Flitton; C. W. Bishop; M. E. Delwiche; T. S. Yoder

    2004-09-01

    The Subsurface Disposal Area (SDA) of the Radioactive Waste Management Complex (RWMC) located at the Idaho National Engineering and Environmental Laboratory (INEEL) contains neutron-activated metals from non-fuel, nuclear reactor core components. The Long-Term Corrosion/Degradation (LTCD) Test is designed to obtain site-specific corrosion rates to support efforts to more accurately estimate the transfer of activated elements to the environment. The test is using two proven, industry-standard methods—direct corrosion testing using metal coupons, and monitored corrosion testing using electrical/resistance probes—to determine corrosion rates for various metal alloys generally representing the metals of interest buried at the SDA, including Type 304L stainless steel, Type 316L stainless steel, Inconel 718, Beryllium S200F, Aluminum 6061, Zircaloy-4, low-carbon steel, and Ferralium 255. In the direct testing, metal coupons are retrieved for corrosion evaluation after having been buried in SDA backfill soil and exposed to natural SDA environmental conditions for times ranging from one year to as many as 32 years, depending on research needs and funding availability. In the monitored testing, electrical/resistance probes buried in SDA backfill soil will provide corrosion data for the duration of the test or until the probes fail. This report provides an update describing the current status of the test and documents results to date. Data from the one-year and three-year results are also included, for comparison and evaluation of trends. In the six-year results, most metals being tested showed extremely low measurable rates of general corrosion. For Type 304L stainless steel, Type 316L stainless steel, Inconel 718, and Ferralium 255, corrosion rates fell in the range of “no reportable” to 0.0002 mils per year (MPY). Corrosion rates for Zircaloy-4 ranged from no measurable corrosion to 0.0001 MPY. These rates are two orders of magnitude lower than those specified in

  19. Results of tests with open fuel in KNK II

    International Nuclear Information System (INIS)

    Schmitz, G.

    1987-03-01

    For the operation of Liquid Metal Cooled Fast Breeder Reactors with cladding failures the consequences of increased contamination by fission products and fuel and the possibility of failure propagation to adjacent fuel pins due to fuel swelling have to be envisaged. To clarify some of these problems a KNK II test program involving open fuel was defined with the first experiments of this program being performed between October 1981 and May 1984. After the description of the test equipment and of the test program, the results will be presented on delayed neutron measurements, fission gas measurements and post irradiation examinations. The report will conclude with a discussion of the results [de

  20. RTG performance on Galileo and Ulysses and Cassini test results

    International Nuclear Information System (INIS)

    Kelly, C. Edward; Klee, Paul M.

    1997-01-01

    Power output from telemetry for the two Galileo RTGs are shown from the 1989 launch to the recent Jupiter encounter. Comparisons of predicted, measured and required performance are shown. Similar comparisons are made for the RTG on the Ulysses spacecraft which completed its planned mission in 1995. Also presented are test results from small scale thermoelectric modules and full scale converters performed for the Cassini program. The Cassini mission to Saturn is scheduled for an October 1997 launch. Small scale module test results on thermoelectric couples from the qualification and flight production runs are shown. These tests have exceeded 19,000 hours are continuing to provide increased confidence in the predicted long term performance of the Cassini RTGs. Test results are presented for full scale units both ETGs (E-6, E-7) and RTGs (F-2, F-5) along with mission power predictions. F-5, fueled in 1985, served as a spare for the Galileo and Ulysses missions and plays the same role in the Cassini program. It has successfully completed all acceptance testing. The ten years storage between thermal vacuum tests is the longest ever experienced by an RTG. The data from this test are unique in providing the effects of long term low temperature storage on power output. All ETG and RTG test results to date indicate that the power requirements of the Cassini spacecraft will be met. BOM and EOM power margins of at least five percent are predicted

  1. Development of Test-Analysis Models (TAM) for correlation of dynamic test and analysis results

    Science.gov (United States)

    Angelucci, Filippo; Javeed, Mehzad; Mcgowan, Paul

    1992-01-01

    The primary objective of structural analysis of aerospace applications is to obtain a verified finite element model (FEM). The verified FEM can be used for loads analysis, evaluate structural modifications, or design control systems. Verification of the FEM is generally obtained as the result of correlating test and FEM models. A test analysis model (TAM) is very useful in the correlation process. A TAM is essentially a FEM reduced to the size of the test model, which attempts to preserve the dynamic characteristics of the original FEM in the analysis range of interest. Numerous methods for generating TAMs have been developed in the literature. The major emphasis of this paper is a description of the procedures necessary for creation of the TAM and the correlation of the reduced models with the FEM or the test results. Herein, three methods are discussed, namely Guyan, Improved Reduced System (IRS), and Hybrid. Also included are the procedures for performing these analyses using MSC/NASTRAN. Finally, application of the TAM process is demonstrated with an experimental test configuration of a ten bay cantilevered truss structure.

  2. Results of Large-Scale Spacecraft Flammability Tests

    Science.gov (United States)

    Ferkul, Paul; Olson, Sandra; Urban, David L.; Ruff, Gary A.; Easton, John; T'ien, James S.; Liao, Ta-Ting T.; Fernandez-Pello, A. Carlos; Torero, Jose L.; Eigenbrand, Christian; hide

    2017-01-01

    For the first time, a large-scale fire was intentionally set inside a spacecraft while in orbit. Testing in low gravity aboard spacecraft had been limited to samples of modest size: for thin fuels the longest samples burned were around 15 cm in length and thick fuel samples have been even smaller. This is despite the fact that fire is a catastrophic hazard for spaceflight and the spread and growth of a fire, combined with its interactions with the vehicle cannot be expected to scale linearly. While every type of occupied structure on earth has been the subject of full scale fire testing, this had never been attempted in space owing to the complexity, cost, risk and absence of a safe location. Thus, there is a gap in knowledge of fire behavior in spacecraft. The recent utilization of large, unmanned, resupply craft has provided the needed capability: a habitable but unoccupied spacecraft in low earth orbit. One such vehicle was used to study the flame spread over a 94 x 40.6 cm thin charring solid (fiberglasscotton fabric). The sample was an order of magnitude larger than anything studied to date in microgravity and was of sufficient scale that it consumed 1.5 of the available oxygen. The experiment which is called Saffire consisted of two tests, forward or concurrent flame spread (with the direction of flow) and opposed flame spread (against the direction of flow). The average forced air speed was 20 cms. For the concurrent flame spread test, the flame size remained constrained after the ignition transient, which is not the case in 1-g. These results were qualitatively different from those on earth where an upward-spreading flame on a sample of this size accelerates and grows. In addition, a curious effect of the chamber size is noted. Compared to previous microgravity work in smaller tunnels, the flame in the larger tunnel spread more slowly, even for a wider sample. This is attributed to the effect of flow acceleration in the smaller tunnels as a result of hot

  3. Physical and chemical test results of electrostatic safe flooring materials

    Science.gov (United States)

    Gompf, R. H.

    1988-01-01

    This test program was initiated because a need existed at the Kennedy Space Center (KSC) to have this information readily available to the engineer who must make the choice of which electrostatic safe floor to use in a specific application. The information, however, should be of value throughout both the government and private industry in the selection of a floor covering material. Included are the test results of 18 floor covering materials which by test evaluation at KSC are considered electrostatically safe. Tests were done and/or the data compiled in the following areas: electrostatics, flammability, hypergolic compatibility, outgassing, floor type, material thickness, and available colors. Each section contains the test method used to gather the data and the test results.

  4. Engineering Evaluation Tests of 16 Gauge vs 14 Gauge Staples IAW MIL-STD-1660, 40MM Cartridge on Wooden Pallet

    National Research Council Canada - National Science Library

    Dugan, Jeffery L

    2008-01-01

    .... Three test units were tested with a load of 2,290 lbs, 2,295 lbs, and 2,295 lbs. The testing accomplished on the test units was the Stacking, Repetitive Shock, Drop, Incline-Impact, Forklifting, and Disassembly Tests. Test Units #1...

  5. Generic test procedure for the qualification of a nuclear emergency generator

    International Nuclear Information System (INIS)

    Simonis, J.C.; Bowman, S.W.

    1985-01-01

    This paper describes the proposed analytical and experimental procedures for the qualification of the standby generators and exciters used in the Emergency Diesel Generator Systems in a nuclear power plant. The components which require qualification are identified through a failure mode analysis of the systems conducted using engineering drawings updated to include all field changes. The qualification of each component includes the margins given in IEEE Std. 323-1974, ''Qualifying Class 1E Equipment for Nuclear Power Generating Stations.'' These margins are combined with the plant specific data to define an enveloping set of environmental parameters. This set of enveloping parameters, plus margin, form the bases for the analysis or test qualification tasks. Proposed qualification of the composite electrical insulation systems used in the generator and exciter on the form or random wound coils is by traceable testing. However, before testing the thermal and radiation degradation data used in the design of the generator and exciter are evaluated to identify if these data are sufficiently traceable to eliminate the need for additional insulation tests. The required tests are guided by applicable standards

  6. Recent results on the RIA test in IGR reactor

    International Nuclear Information System (INIS)

    Asmolov, V.; Yegorova, L.

    1997-01-01

    At the 23d WRSM meeting the data base characterizing results of VVER high burnup fuel rods tests under reactivity-initiated accident (RIA) conditions was presented. Comparison of PWR and VVER failure thresholds was given also. Additional analysis of the obtained results was being carried out during 1996. The results of analysis show that the two different failure mechanisms were observed for PWR and VVER fuel rods. Some factors which can be as the possible reasons of these differences are presented. First of them is the state of preirradiated cladding. Published test data for PWR high burnup fuel rods demonstrated that the PWR high burnup fuel rods failed at the RIA test are characterized by very high level of oxidation and hydriding for the claddings. Corresponding researches were performed at Institute of Atomic Reactors (RLAR, Dimitrovgrad, Russia) for large set of VVER high burnup fuel rods. Results of these investigations show that preirradiated commercial Zr-1%Nb claddings practically keep their initial levels of oxidation and H 2 concentration. Consequently the VVER preirradiated cladding must keep the high level of mechanical properties. The second reason leading to differences between failure mechanisms for two types of high burnup fuel rods can be the test conditions. Now such kind of analysis have been performed by two methods

  7. ExEP yield modeling tool and validation test results

    Science.gov (United States)

    Morgan, Rhonda; Turmon, Michael; Delacroix, Christian; Savransky, Dmitry; Garrett, Daniel; Lowrance, Patrick; Liu, Xiang Cate; Nunez, Paul

    2017-09-01

    EXOSIMS is an open-source simulation tool for parametric modeling of the detection yield and characterization of exoplanets. EXOSIMS has been adopted by the Exoplanet Exploration Programs Standards Definition and Evaluation Team (ExSDET) as a common mechanism for comparison of exoplanet mission concept studies. To ensure trustworthiness of the tool, we developed a validation test plan that leverages the Python-language unit-test framework, utilizes integration tests for selected module interactions, and performs end-to-end crossvalidation with other yield tools. This paper presents the test methods and results, with the physics-based tests such as photometry and integration time calculation treated in detail and the functional tests treated summarily. The test case utilized a 4m unobscured telescope with an idealized coronagraph and an exoplanet population from the IPAC radial velocity (RV) exoplanet catalog. The known RV planets were set at quadrature to allow deterministic validation of the calculation of physical parameters, such as working angle, photon counts and integration time. The observing keepout region was tested by generating plots and movies of the targets and the keepout zone over a year. Although the keepout integration test required the interpretation of a user, the test revealed problems in the L2 halo orbit and the parameterization of keepout applied to some solar system bodies, which the development team was able to address. The validation testing of EXOSIMS was performed iteratively with the developers of EXOSIMS and resulted in a more robust, stable, and trustworthy tool that the exoplanet community can use to simulate exoplanet direct-detection missions from probe class, to WFIRST, up to large mission concepts such as HabEx and LUVOIR.

  8. Improved PFB operations - 400-hour turbine test results

    Science.gov (United States)

    Rollbuhler, R. J.; Benford, S. M.; Zellars, G. R.

    1980-04-01

    The paper deals with a 400-hr small turbine test in the effluent of a pressurized fluidized bed (PFB) at an average temperature of 770 C, an average relative gas velocity of 300 m/sec, and average solid loadings of 200 ppm. Consideration is given to combustion parameters and operating procedure as well as to the turbine system and turbine test operating procedures. Emphasis is placed on erosion/corrosion results.

  9. Laboratory results of the AOF system testing

    Science.gov (United States)

    Kolb, Johann; Madec, Pierre-Yves; Arsenault, Robin; Oberti, Sylvain; Paufique, Jérôme; La Penna, Paolo; Ströbele, Stefan; Donaldson, Robert; Soenke, Christian; Suárez Valles, Marcos; Kiekebusch, Mario; Argomedo, Javier; Le Louarn, Miska; Vernet, Elise; Haguenauer, Pierre; Duhoux, Philippe; Aller-Carpentier, Emmanuel; Valenzuela, Jose Javier; Guerra, Juan Carlos

    2016-07-01

    For two years starting in February 2014, the AO modules GRAAL for HAWK-I and GALACSI for MUSE of the Adaptive Optics Facility project have undergone System Testing at ESO's Headquarters. They offer four different modes: NGS SCAO, LGS GLAO in the IR, LGS GLAO and LTAO in the visible. A detailed characterization of those modes was made possible by the existence of ASSIST, a test bench emulating an adaptive VLT including the Deformable Secondary Mirror, a star simulator and turbulence generator and a VLT focal plane re-imager. This phase aimed at validating all the possible components and loops of the AO modules before installation at the actual VLT that comprises the added complexity of real LGSs, a harsher non-reproducible environment and the adaptive telescope control. In this paper we present some of the major results obtained and challenges encountered during the phase of System Tests, like the preparation of the Acquisition sequence, the testing of the Jitter loop, the performance optimization in GLAO and the offload of low-order modes from the DSM to the telescope (restricted to the M2 hexapod). The System Tests concluded with the successful acceptance, shipping, installation and first commissioning of GRAAL in 2015 as well as the acceptance and shipping of GALACSI, ready for installation and commissioning early 2017.

  10. Evaluation of STD/AIDS prevention programs: a review of approaches and methodologies Avaliação de programas de prevenção de DST/AIDS: revendo abordagens e metodologias

    Directory of Open Access Journals (Sweden)

    Marly Marques da Cruz

    2007-05-01

    Full Text Available The article presents a review of approaches and methodologies in the evaluation of STD/AIDS prevention programs, searching for theoretical and methodological support for the institutionalization of evaluation and decision-making. The review included the MEDLINE, SciELO, and ISI Web of Science databases and other sources like textbooks and congress abstracts from 1990 to 2005, with the key words: "evaluation", "programs", "prevention", "STD/AIDS", and similar terms. The papers showed a predominance of quantitative outcome or impact evaluative studies with an experimental or quasi-experimental design. The main use of evaluation is accountability, although knowledge output and program improvement were also identified in the studies. Only a few evaluative studies contemplate process evaluation and its relationship to the contexts. The review aimed to contribute to the debate on STD/AIDS, which requires more effective, consistent, and sustainable decisions in the field of prevention.O artigo apresenta uma revisão de abordagens e metodologias sobre avaliação de programas de prevenção de DST/AIDS, buscando um aporte teórico-metodológico que subsidie a institucionalização da avaliação e a tomada de decisão. A revisão foi realizada nas bases de dados do MEDLINE, SciELO, ISI Web of Science e outras fontes, tais como livros, textos e resumos apresentados em congressos, no período de 1990 a 2005, das palavras-chave: "avaliação", "programas", "prevenção", "DST/AIDS" e termos similares. Nos artigos levantados há uma predominância de estudos avaliativos quantitativos de resultado ou de impacto, do tipo experimental ou quase-experimental. O principal uso da avaliação é o da prestação de contas, embora a produção do conhecimento e a melhoria do programa possam ser identificados nos estudos examinados. Poucos são os estudos avaliativos que contemplam a avaliação de processo e discutem a sua relação com os contextos. Pretendeu

  11. Compatibility of Clinical Manifestation with Skin Prick Test Result and Food Provocation Test in Food Cross Reaction

    OpenAIRE

    Lubis, Azwin; Barlianto, Wisnu; Endaryanto, Anang; Harsono, Ariyanto

    2017-01-01

    Background: Subjective diagnostic test of food allergy is hugely biased, resulting in irrational diet avoidance. Additional objective tools by skin prick test following food provocation test resulting more accurate cause and prevalence on population. Purpose: To evaluate the compatibility of clinical symptoms with skin prick test and provocation test for imunoglobulin E (IgE) mediated food allergy in Dr. Soetomo Hospital Surabaya. Methods: Cross sectional observational analytic study. Patient...

  12. LWR surveillance dosimetry improvement program: PSF metallurgical blind test results

    International Nuclear Information System (INIS)

    Kam, F.B.K.; Stallmann, F.W.; Guthrie, G.; McElroy, W.N.

    1985-01-01

    The ORR-PSF benchmark experiment was designed to simulate the surveillance capsule-pressure vessel configuration in power reactors and to test the validity of procedures which determine the radiation damage in the vessel from test results in the surveillance capsule. The PSF metallurgical blind test was initiated to give participants an opportunity to test their current embrittlement prediction methodologies. Experimental results were withheld from the participants except for the type of information which is normally contained in surveillance reports. Preliminary analysis of the PSF metallurgical blind test results shows that: (1) current prediction methodologies, as used by the PSF Blind Test participants, are adequate, falling within +- 20 0 C of the measured values for Δ NDT. None of the different methods is clearly superior; (2) the proposed revision of Reg. Guide 1.99 (Rev. 2) gives a better representation of the fluence and chemistry dependency of Δ NDT than the current version (Rev. 1); and (3) fluence rate effects can be seen but not quantified. Fluence spectral effects are too small to be detectable in this experiment. (orig.)

  13. Laboratory test result interpretation for primary care doctors in South Africa

    Directory of Open Access Journals (Sweden)

    Naadira Vanker

    2017-03-01

    Full Text Available Background: Challenges and uncertainties with test result interpretation can lead to diagnostic errors. Primary care doctors are at a higher risk than specialists of making these errors, due to the range in complexity and severity of conditions that they encounter. Objectives: This study aimed to investigate the challenges that primary care doctors face with test result interpretation, and to identify potential countermeasures to address these. Methods: A survey was sent out to 7800 primary care doctors in South Africa. Questionnaire themes included doctors’ uncertainty with interpreting test results, mechanisms used to overcome this uncertainty, challenges with appropriate result interpretation, and perceived solutions for interpreting results. Results: Of the 552 responses received, the prevalence of challenges with result interpretation was estimated in an average of 17% of diagnostic encounters. The most commonly-reported challenges were not receiving test results in a timely manner (51% of respondents and previous results not being easily available (37%. When faced with diagnostic uncertainty, 84% of respondents would either follow-up and reassess the patient or discuss the case with a specialist, and 67% would contact a laboratory professional. The most useful test utilisation enablers were found to be: interpretive comments (78% of respondents, published guidelines (74%, and a dedicated laboratory phone line (72%. Conclusion: Primary care doctors acknowledge uncertainty with test result interpretation. Potential countermeasures include the addition of patient-specific interpretive comments, the availability of guidelines or algorithms, and a dedicated laboratory phone line. The benefit of enhanced test result interpretation would reduce diagnostic error rates.

  14. Arc melter demonstration baseline test results

    International Nuclear Information System (INIS)

    Soelberg, N.R.; Chambers, A.G.; Anderson, G.L.; Oden, L.L.; O'Connor, W.K.; Turner, P.C.

    1994-07-01

    This report describes the test results and evaluation for the Phase 1 (baseline) arc melter vitrification test series conducted for the Buried Waste Integrated Demonstration program (BWID). Phase 1 tests were conducted on surrogate mixtures of as-incinerated wastes and soil. Some buried wastes, soils, and stored wastes at the INEL and other DOE sites, are contaminated with transuranic (TRU) radionuclides and hazardous organics and metals. The high temperature environment in an electric arc furnace may be used to process these wastes to produce materials suitable for final disposal. An electric arc furnace system can treat heterogeneous wastes and contaminated soils by (a) dissolving and retaining TRU elements and selected toxic metals as oxides in the slag phase, (b) destroying organic materials by dissociation, pyrolyzation, and combustion, and (c) capturing separated volatilized metals in the offgas system for further treatment. Structural metals in the waste may be melted and tapped separately for recycle or disposal, or these metals may be oxidized and dissolved into the slag. The molten slag, after cooling, will provide a glass/ceramic final waste form that is homogeneous, highly nonleachable, and extremely durable. These features make this waste form suitable for immobilization of TRU radionuclides and toxic metals for geologic timeframes. Further, the volume of contaminated wastes and soils will be substantially reduced in the process

  15. Space Launch System Base Heating Test: Experimental Operations & Results

    Science.gov (United States)

    Dufrene, Aaron; Mehta, Manish; MacLean, Matthew; Seaford, Mark; Holden, Michael

    2016-01-01

    NASA's Space Launch System (SLS) uses four clustered liquid rocket engines along with two solid rocket boosters. The interaction between all six rocket exhaust plumes will produce a complex and severe thermal environment in the base of the vehicle. This work focuses on a recent 2% scale, hot-fire SLS base heating test. These base heating tests are short-duration tests executed with chamber pressures near the full-scale values with gaseous hydrogen/oxygen engines and RSRMV analogous solid propellant motors. The LENS II shock tunnel/Ludwieg tube tunnel was used at or near flight duplicated conditions up to Mach 5. Model development was based on the Space Shuttle base heating tests with several improvements including doubling of the maximum chamber pressures and duplication of freestream conditions. Test methodology and conditions are presented, and base heating results from 76 runs are reported in non-dimensional form. Regions of high heating are identified and comparisons of various configuration and conditions are highlighted. Base pressure and radiometer results are also reported.

  16. Graphite electrode arc melter demonstration Phase 2 test results

    International Nuclear Information System (INIS)

    Soelberg, N.R.; Chambers, A.G.; Anderson, G.L.; O'Connor, W.K.; Oden, L.L.; Turner, P.C.

    1996-06-01

    Several U.S. Department of Energy organizations and the U.S. Bureau of Mines have been collaboratively conducting mixed waste treatment process demonstration testing on the near full-scale graphite electrode submerged arc melter system at the Bureau's Albany (Oregon) Research Center. An initial test series successfully demonstrated arc melter capability for treating surrogate incinerator ash of buried mixed wastes with soil. The conceptual treatment process for that test series assumed that buried waste would be retrieved and incinerated, and that the incinerator ash would be vitrified in an arc melter. This report presents results from a recently completed second series of tests, undertaken to determine the ability of the arc melter system to stably process a wide range of open-quotes as-receivedclose quotes heterogeneous solid mixed wastes containing high levels of organics, representative of the wastes buried and stored at the Idaho National Engineering Laboratory (INEL). The Phase 2 demonstration test results indicate that an arc melter system is capable of directly processing these wastes and could enable elimination of an up-front incineration step in the conceptual treatment process

  17. RTG performance on Galileo and Ulysses and Cassini test results

    International Nuclear Information System (INIS)

    Kelly, C.E.; Klee, P.M.

    1997-01-01

    Power output from telemetry for the two Galileo RTGs are shown from the 1989 launch to the recent Jupiter encounter. Comparisons of predicted, measured and required performance are shown. Similar comparisons are made for the RTG on the Ulysses spacecraft which completed its planned mission in 1995. Also presented are test results from small scale thermoelectric modules and full scale converters performed for the Cassini program. The Cassini mission to Saturn is scheduled for an October 1997 launch. Small scale module test results on thermoelectric couples from the qualification and flight production runs are shown. These tests have exceeded 19,000 hours are continuing to provide increased confidence in the predicted long term performance of the Cassini RTGs. Test results are presented for full scale units both ETGs (E-6, E-7) and RTGs (F-2, F-5) along with mission power predictions. F-5, fueled in 1985, served as a spare for the Galileo and Ulysses missions and plays the same role in the Cassini program. It has successfully completed all acceptance testing. The ten years storage between thermal vacuum tests is the longest ever experienced by an RTG. The data from this test are unique in providing the effects of long term low temperature storage on power output. All ETG and RTG test results to date indicate that the power requirements of the Cassini spacecraft will be met. BOM and EOM power margins of at least five percent are predicted. copyright 1997 American Institute of Physics

  18. Post-test investigation result on the WWER-1000 fuel tested under severe accident conditions

    International Nuclear Information System (INIS)

    Goryachev, A.; Shtuckert, Yu.; Zwir, E.; Stupina, L.

    1996-01-01

    The model bundle of WWER-type were tested under SFD condition in the out-of-pile CORA installation. The objective of the test was to provide an information on the WWER-type fuel bundles behaviour under severe fuel damage accident conditions. Also it was assumed to compare the WWER-type bundle damage mechanisms with these experienced in the PWR-type bundle tests with aim to confirm a possibility to use the various code systems, worked our for PWR as applied to WWER. In order to ensure the possibility of the comparison of the calculated core degradation parameters with the real state of the tested bundle, some parameters have been measured on the bundle cross-sections under examination. Quantitative parameters of the bundle degradation have been evaluated by digital image processing of the bundle cross-sections. The obtained results are shown together with corresponding results obtained by the other participants of this investigation. (author). 3 refs, 13 figs

  19. Oscillating-flow loss test results in rectangular heat exchanger passages

    Science.gov (United States)

    Wood, J. Gary

    1991-01-01

    Test results of oscillating flow losses in rectangular heat exchanger passages of various aspect ratios are given. This work was performed in support of the design of a free-piston Stirling engine (FPSE) for a dynamic space power conversion system. Oscillating flow loss testing was performed using an oscillating flow rig, which was based on a variable stroke and variable frequency linear drive motor. Tests were run over a range of oscillating flow parameters encompassing the flow regimes of the proposed engine design. Test results are presented in both tabular and graphical form and are compared against analytical predictions.

  20. IEEE Std 600: IEEE trial-use standard requirements for organizations that conduct qualification testing of safety systems equipment for use in nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The purpose of this standard is to provide requirements for establishing a program for conducting qualification tests of safety systems equipment used in nuclear power generating stations. Compliance with the requirements of this standard does not assure the adequacy of the qualification tests performed. This standard applies to organizations that conduct qualification tests on equipment that has a definable safety function and is an identifiable part of a safety system for use in nuclear power generating stations. It requires a technical program, a quality assurance program, and a demonstrated ability to meet specified technical requirements. It does not apply to materials tests, production tests, normal performance testing, qualification by analysis, qualification by operating experience, or reliability tests such as diesel-generator multiple start tests. The intent of this standard is to achieve greater consistency, reliability, and reproducibility of test results and to provide adequate control of qualification testing of safety systems equipment

  1. Results from the STAR TPC system test

    International Nuclear Information System (INIS)

    Betts, W.

    1996-01-01

    A system test of various components of the Solenoidal Tracker at RHIC (STAR) detector, operating in concern, has recently come on-line. Communication between a major sub-detector, a sector of the Time Projection Chamber (TPC), and the trigger, data acquisition and slow controls systems has been established, enabling data from cosmic ray muons to be collected. First results from an analysis of the TPC data are presented. These include measurements of system noise, electronic parameters such as amplifier gains and pedestal values, and tracking resolution for cosmic ray muons and laser induced ionization tracks. A discussion on the experience gained in integrating the different components for the system test is also given

  2. Optimized Environmental Test Sequences to Ensure the Sustainability and Reliability of Marine Weapons

    Directory of Open Access Journals (Sweden)

    Jung Ho Yang

    2014-11-01

    Full Text Available In recent years, there has been an increase in the types of marine weapons used in response to diverse hostile threats. However, because marine weapons are only tested under a single set of environmental conditions, failures due to different environmental stresses have been difficult to detect. Hence, this study proposes an environmental test sequence for multi-environment testing. The environmental test sequences for electrical units described in the international standard IEC 60068-1, and for military supply described in the United States national standard MIL-STD-810G were investigated to propose guidelines for the appropriate test sequences. This study demonstrated the need for tests in multiple environments by investigating marine weapon accidents, and evaluated which environmental stresses and test items have the largest impacts on marine weapons using a two-phase quality function deployment (QFD analysis of operational scenarios, environmental stresses, and environmental test items. Integer programming was used to determine the most influential test items and the shortest environmental test time, allowing us to propose optimal test procedures. Based on our analysis, we developed optimal environmental test sequences that could be selected by a test designer.

  3. Conhecimento sobre DST/AIDS por estudantes adolescentes Conocimiento sobre DST/SIDA por estudiantes adolecentes Knowledge of STD/AIDS among adolescent students

    Directory of Open Access Journals (Sweden)

    José Roberto da Silva Brêtas

    2009-09-01

    ; 75% femenino y 52% masculino citaron la televisión como fuente para obtención de informaciones; en cuanto al conocimiento de las EST (enfermedades sexualmente transmisibles los jóvenes demostraron tener poca información; en relación a la cura de las EST, 57% femenino y 71% masculino refirieron no tener conocimiento, siendo que 5% femenino y 6% masculino pensaban que el SIDA tiene cura. De forma general, pudimos concluir que las jóvenes estaban mejor informadas que los jóvenes.This study aims to analyze the degree of knowledge adolescents have on STD/AIDS prevention, transmission, signs, and symptoms, and to contribute with the elaboration of educational actions in the University Extension Program called Corporality and Health Promotion. The research counted on 1,087 adolescents (40% females, 60% males and was carried out in three elementary and high schools located in the municipality of Embu. A structured, multiple choice questionnaire was applied. Data indicated the achievement of the following results: as per the prevention, 92% of girls and 78% of boys referred to the use of condoms, while 42% of girls and 43% of boys affirmed to wash their genitalia after the sexual relation; 75% females and 52% males quoted television as their source of information. As per the knowledge of STD, girls and boys indicated not to have much information on the issue. Regarding STD healing programs, 57% females and 71% males affirmed not to have any knowledge on the issue; 5% of girls and 6% of boys thought AIDS to be curable. In a general perspective, we can conclude that girls were more familiar with the study's issues than boys.

  4. Test Results and Comparison of Triaxial Strength Testing of Waste Isolation Pilot Plant Clean Salt

    Energy Technology Data Exchange (ETDEWEB)

    Buchholz, Stuart A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-12-01

    This memorandum documents laboratory thermomechanical triaxial strength testing of Waste Isolation Pilot Plant (WIPP) clean salt. The limited study completed independent, adjunct laboratory tests in the United States to assist in validating similar testing results being provided by the German facilities. The testing protocol consisted of completing confined triaxial, constant strain rate strength tests of intact WIPP clean salt at temperatures of 25°C and 100°C and at multiple confining pressures. The stratigraphy at WIPP also includes salt that has been labeled “argillaceous.” The much larger test matrix conducted in Germany included both the so-called clean and argillaceous salts. When combined, the total database of laboratory results will be used to develop input parameters for models, assess adequacy of existing models, and predict material behavior. These laboratory studies are also consistent with the goals of the international salt repository research program. The goal of this study was to complete a subset of a test matrix on clean salt from the WIPP undertaken by German research groups. The work was performed at RESPEC in Rapid City, South Dakota. A rigorous Quality Assurance protocol was applied, such that corroboration provides the potential of qualifying all of the test data gathered by German research groups.

  5. Test-beam results of a SOI pixel detector prototype

    CERN Document Server

    Bugiel, Roma; Dannheim, Dominik; Fiergolski, Adrian; Hynds, Daniel; Idzik, Marek; Kapusta, P; Kucewicz, Wojciech; Munker, Ruth Magdalena; Nurnberg, Andreas Matthias

    2018-01-01

    This paper presents the test-beam results of a monolithic pixel-detector prototype fabricated in 200 nm Silicon-On-Insulator (SOI) CMOS technology. The SOI detector was tested at the CERN SPS H6 beam line. The detector is fabricated on a 500 μm thick high-resistivity float- zone n-type (FZ-n) wafer. The pixel size is 30 μm × 30 μm and its readout uses a source- follower configuration. The test-beam data are analysed in order to compute the spatial resolution and detector efficiency. The analysis chain includes pedestal and noise calculation, cluster reconstruction, as well as alignment and η-correction for non-linear charge sharing. The results show a spatial resolution of about 4.3 μm.

  6. Stigma's Effect on Social Interaction and Social Media Activity.

    Science.gov (United States)

    Boudewyns, Vanessa; Himelboim, Itai; Hansen, Derek L; Southwell, Brian G

    2015-01-01

    Stigmatized topics, such as HIV/STD, likely constrain related information sharing in ways that should be apparent in social interactions both on and off the Internet. Specifically, the authors predicted that the more people perceive an issue as stigmatized, the less likely they are to talk about the issue both privately (with sexual partners and peers) and publicly (on Twitter). Study 1 tested the effect of stigma on conversations at the individual level: The authors asked a group of participants (N = 138) about perceived STD-testing stigma, interactions with a sexual partner, and conversations with peers about STD testing. Study 2 assessed whether health conditions, in the aggregate, were less likely to generate social media activity as a function of current stigmatization. Using 259,758 archived Twitter posts mentioning 13 medical conditions, the authors tested whether level of stigma predicted the volume of relevant social media conversation, controlling for each condition's amount of advocacy and Google search popularity from a user's perspective. Findings supported our hypotheses. Individuals who reported perceiving a given health conditions in more stigmatic ways also reported interacting less with others about that topic; Twitter results showed a similar pattern. Results also suggest a more complex story of influence, as funding from the National Institutes of Health (i.e., each conditions amount of advocacy) associated with the examined health conditions also predicted Twitter activity. Overall, these results indicated that stigma had a similar, dampening effect on face-to-face and Twitter interactions. Findings hold theoretical and practical implications, which are discussed.

  7. 77 FR 50694 - Proposed Data Collections Submitted for Public Comment and Recommendations

    Science.gov (United States)

    2012-08-22

    ... is reaching the appropriate target audience; (2) identify messages the audience is taking away from GYT; (3) determine whether individuals who saw the campaign are more likely to engage in target... STD/HIV testing. Because the GYT campaign targets populations with higher rates of STD/HIV than the...

  8. State-of-the-Art: Evolution of Software Life Cycle Process for NPPs

    International Nuclear Information System (INIS)

    Suh, Yong Suk; Park, Heui Youn; Son, Ki Sung; Lee, Ki Hyun; Kim, Hyeon Soo

    2007-01-01

    This paper is to investigate the evolution of software life cycle process (SLCP) for nuclear power plants (NPPs) based on IEEE Std 7-4.3.2 which has been updated twice (namely 1993 and 2003 ) since it was published in 1982 and relevant software certifications. IEEE Std 7-4.3.2 specifies additional computer specific requirements to supplement the criteria and requirements of IEEE Std 603. It also specifies the software quality requirements as follows: computer software shall be developed, modified, or accepted in accordance with an approved software quality assurance (QA) plan. IEEE Std 7-4.3.2-1982 specifies a minimum software development process as follows: plan, design and implementation. ANSI/ASME NQA-1-1979 is not directly related to software development process but to overall quality assurance criteria. IEEE Std 7-4.3.2-1993 addresses ASME NQA-2a-1990 Part 2.7 for software development requirements. ASME NQA-2a-1990 Part 2.7 which was interpreted into KEPIC QAP-2 II.7, specifies software development process in more detail as follows: requirements, design, implementation, test, installation and checkout, operation and maintenance, and retirement. Along with this, software QA plan is emphasized in IEEE Std 730-1989. In IEEE Std 7-4.3.2-2003, IEEE/EIA Std 12207.0-1996 replaces the ASME NQA as a requirement for software development. The evolution of SLCP from ASME NQA to IEEE/EIA Std 12207.0 is discussed in Section 2 of this paper. The publication of IEEE/EIA Std 12207.0 is motivated from industrial experiences and practices to promote the quality of software. In Section 3, three international software certifications relating to the IEEE/EIA Std 12207.0 are introduced

  9. Pipe rupture test results: 4-inch pipe whip tests under PWR LOCA conditions

    International Nuclear Information System (INIS)

    Miyazaki, Noriyuki; Ueda, Shuzo; Isozaki, Toshikuni; Kato, Rokuro; Kurihara, Ryoichi; Yano, Toshikazu; Miyazono, Shohachiro

    1982-09-01

    This report summarizes the results of 4-inch pipe whip tests (RUN No. 5506, 5507, 5508 and 5604) under the PWR LOCA conditions. The dynamic behaviors of the test pipe and restraints were studied in the tests. In the tests, the gap between the test pipe and the restraints was kept at the constant value of 8.85 mm and the overhang length was varied from 250 mm to 650 mm. The dynamic behaviors of the test pipe and the restraint were made clear by the outputs of strain gages and the measurements of residual deformations. The data of water hammer in subcooled water were also obtained by the pressure transducers mounted on the test pipe. The main conclusions obtained from the tests are as follows. (1) The whipping of pipe can be prevented more effectively as the overhang length becomes shorter. (2) The load acting on the restraint-support structure becomes larger as the overhang length becomes shorter. (3) The restraint farther from the break location does not limit the pipe movement except for the first impact when the overhang length is long. (4) The ultimate moment M sub(u) of the pipe at the restraint location can be used to predict the plastic collapse of the whipping pipe. (5) The restraints slide along the pipe axis and are subjected to bending moment, when the overhang length is long. (author)

  10. Test OPTRAN 1-1 results

    International Nuclear Information System (INIS)

    Martinson, Z.R.

    1982-01-01

    The objective of the OPT 1-1 Test Series was to evaluate the extent of damage and the threshold for failure during simulated BWR anticipated transients. Four power transient tests with progressively higher power levels were performed with preirradiated fuel rods at power ramp rates as high as 550 kW/m per second. Six separately shrouded fuel rods fabricated by the General Electric Co., and preirradiated in the Monticello BWR to burnups of about 5000 to 23,000 MWd/t were tested, four at a time. Four of the fuel rods were of typical GE 8 x 8 design, except for fuel length (0.75 m). Two of the rods included design modifications to improve their PCI-resistant characteristics. A lengthy fuel conditioning preceded the transient testing of the fuel rods

  11. Graphite electrode arc melter demonstration Phase 2 test results

    Energy Technology Data Exchange (ETDEWEB)

    Soelberg, N.R.; Chambers, A.G.; Anderson, G.L.; O`Connor, W.K.; Oden, L.L.; Turner, P.C.

    1996-06-01

    Several U.S. Department of Energy organizations and the U.S. Bureau of Mines have been collaboratively conducting mixed waste treatment process demonstration testing on the near full-scale graphite electrode submerged arc melter system at the Bureau`s Albany (Oregon) Research Center. An initial test series successfully demonstrated arc melter capability for treating surrogate incinerator ash of buried mixed wastes with soil. The conceptual treatment process for that test series assumed that buried waste would be retrieved and incinerated, and that the incinerator ash would be vitrified in an arc melter. This report presents results from a recently completed second series of tests, undertaken to determine the ability of the arc melter system to stably process a wide range of {open_quotes}as-received{close_quotes} heterogeneous solid mixed wastes containing high levels of organics, representative of the wastes buried and stored at the Idaho National Engineering Laboratory (INEL). The Phase 2 demonstration test results indicate that an arc melter system is capable of directly processing these wastes and could enable elimination of an up-front incineration step in the conceptual treatment process.

  12. Paternity tests in Mexico: Results obtained in 3005 cases.

    Science.gov (United States)

    García-Aceves, M E; Romero Rentería, O; Díaz-Navarro, X X; Rangel-Villalobos, H

    2018-04-01

    National and international reports regarding the paternity testing activity scarcely include information from Mexico and other Latin American countries. Therefore, we report different results from the analysis of 3005 paternity cases analyzed during a period of five years in a Mexican paternity testing laboratory. Motherless tests were the most frequent (77.27%), followed by trio cases (20.70%); the remaining 2.04% included different cases of kinship reconstruction. The paternity exclusion rate was 29.58%, higher but into the range reported by the American Association of Blood Banks (average 24.12%). We detected 65 mutations, most of them involving one-step (93.8% and the remaining were two-step mutations (6.2%) thus, we were able to estimate the paternal mutation rate for 17 different STR loci: 0.0018 (95% CI 0.0005-0.0047). Five triallelic patterns and 12 suspected null alleles were detected during this period; however, re-amplification of these samples with a different Human Identification (HID) kit confirmed the homozygous genotypes, which suggests that most of these exclusions actually are one-step mutations. HID kits with ≥20 STRs detected more exclusions, diminishing the rate of inconclusive results with isolated exclusions (Powerplex 21 kit (20 STRs) and Powerplex Fusion kit (22 STRs) offered similar PI (p = 0.379) and average number of exclusions (PE) (p = 0.339) when a daughter was involved in motherless tests. In brief, besides to report forensic parameters from paternity tests in Mexico, results describe improvements to solve motherless paternity tests using HID kits with ≥20 STRs instead of one including 15 STRs. Copyright © 2018 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

  13. Influence of diet on the results of laboratory tests

    Directory of Open Access Journals (Sweden)

    Kinga Lis

    2013-12-01

    Full Text Available Blood and urine laboratory tests are necessary to diagnose the state of the patient. These tests are also helpful in the assessment of diet and nutritional status of the organism. It is recommended that both blood and urine for laboratory tests be collected in the morning, from fasting patients after an overnight rest. These conditions are defined as the standard conditions for collection of material for laboratory testing. Before testing, patients should follow their natural diet and avoid physical exertion, night work, long-distance travel, as well as consumption of alcohol and drugs. They should also reduce the consumption of synthetic vitamins and herbal remedies and other dietary supplements. Medications should be limited to those that are absolutely necessary. All of these factors can affect the results of laboratory tests.

  14. Preliminary irradiation test results from the Yankee Atomic Electric Company reactor vessel test irradiation program

    International Nuclear Information System (INIS)

    Biemiller, E.C.; Fyfitch, S.; Campbell, C.A.

    1993-01-01

    The Yankee Atomic Electric Company test irradiation program was implemented to characterize the irradiation response of representative Yankee Rowe reactor vessel beltline plate materials and to remove uncertainties in the analysis of existing irradiation data on the Yankee Rowe reactor vessel steel. Plate materials each containing 0.24 w/o copper, but different nickel contents at 0.63 w/o and 0.19 w/o, were heat treated to simulate the Yankee vessel heat treatment (austenitized at 1800 deg F) and to simulate Regulatory Guide 1.99 database materials (austenitized at 1600 deg. F). These heat treatments produced different microstructures so the effect of microstructure on irradiation damage sensitivity could be tested. Because the nickel content of the test plates varied and the copper level was constant, the effect of nickel on irradiation embrittlement was also tested. Correlation monitor material, HSST-02, was included in the program to benchmark the Ford Nuclear Reactor (U. of Michigan Test Reactor) which had never been used for this type of irradiation program. Materials taken from plate surface locations (vs. 1/4T) were included to test whether or not the improved toughness properties of the plate surface layer, resulting from the rapid quench, is maintained after irradiation. If the improved properties are maintained, pressurized thermal shock calculations could utilize this margin. Finally, for one experiment, irradiations were conducted at two irradiation temperatures (500 deg. F and 550 deg. F) to determine the effect of irradiation temperature on embrittlement. The preliminary results of the irradiation program show an increase in T 30 shift of 69 deg. F for a decrease in irradiation temperature of 50 deg. F. The results suggest that for nickel bearing steels, the superior toughness of plate surface material is maintained after irradiation and for the copper content tested, nickel had no apparent effect on irradiation response. No apparent microstructure

  15. Interseccionalidade de gênero, classe e raça e vulnerabilidade de adolescentes negras às DST/aids Intersectionality of gender, class and race, and vulnerability of black female adolescents to STD/AIDS

    Directory of Open Access Journals (Sweden)

    Stella R. Taquette

    2010-12-01

    Full Text Available OBJETIVO: verificar a vulnerabilidade ao HIV/aids de adolescentes femininas moradoras de favelas da cidade do Rio de Janeiro. MÉTODO: foi utilizada uma combinação de métodos, quantitativo e qualitativo. Na etapa quantitativa, realizou-se um estudo observacional de corte transversal por meio de entrevistas e exames clínico/laboratoriais para diagnóstico de DST, e, na qualitativa, desenvolveram-se grupos focais sobre os temas sexualidade, gênero e raça. RESULTADOS: foram entrevistadas 816 adolescentes de 10 diferentes comunidades, com um grupo focal em cada favela: 74% eram negras, 39% eram sexualmente ativas e destas 24,4% eram portadoras de DST. Houve uma relação estatisticamente significativa entre a variável raça/cor negra e a atividade sexual. Na fase qualitativa, evidenciou-se que a discriminação racial sofrida é cotidiana e contribui para a construção de autoimagem negativa que aliada a pobreza, violência de gênero e dificuldade de acesso aos serviços de saúde ampliam a vulnerabilidade às DST/aids. CONCLUSÃO: o estudo sugere a criação de políticas que proporcionem o aumento da oferta de serviços de atendimento ginecológico a esse público, com ações que favoreçam a utilização de preservativo feminino e contribuam para reduzir a desigualdade social, de gênero e de raça.OBJECTIVE: To verify the vulnerability to HIV/AIDS of female adolescents that live in poor communities of the city of Rio de Janeiro. METHODS: It was carried out with quantitative and qualitative analyses. The quantitative phase was a cross-sectional study, through interviews of 816 adolescents and clinical/laboratory tests in ten different slums, and the qualitative phase was done on one focus group about sexuality of gender and race in each community. RESULTS: 74% of the adolescents were black, 39% had sexual activity and 24.4% of those had STD. A statistical significant association occurred between the black color/race and sexual activity

  16. Results from Testing of Two Rotary Percussive Drilling Systems

    Science.gov (United States)

    Kriechbaum, Kristopher; Brown, Kyle; Cady, Ian; von der Heydt, Max; Klein, Kerry; Kulczycki, Eric; Okon, Avi

    2010-01-01

    The developmental test program for the MSL (Mars Science Laboratory) rotary percussive drill examined the e ect of various drill input parameters on the drill pene- tration rate. Some of the input parameters tested were drill angle with respect to gravity and percussive impact energy. The suite of rocks tested ranged from a high strength basalt to soft Kaolinite clay. We developed a hole start routine to reduce high sideloads from bit walk. The ongoing development test program for the IMSAH (Integrated Mars Sample Acquisition and Handling) rotary percussive corer uses many of the same rocks as the MSL suite. An additional performance parameter is core integrity. The MSL development test drill and the IMSAH test drill use similar hardware to provide rotation and percussion. However, the MSL test drill uses external stabilizers, while the IMSAH test drill does not have external stabilization. In addition the IMSAH drill is a core drill, while the MSL drill uses a solid powdering bit. Results from the testing of these two related drilling systems is examined.

  17. Type test of Class 1E electric cables, field splices, and connections for nuclear power generating stations - 1975

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    This Standard provides direction for establishing type tests which may be used in qualifying Class 1E electric cables, field splices, and other connections for service in nuclear power generating stations. General guidelines for qualifications are given in IEEE Std 323-1974, Standard for Qualifying Class 1E Electric Equipment for Nuclear Power Generating Stations. Categories of cables covered are those used for power control and instrumentation services. Though intended primarily to pertain to cable for field installation, this guide may also be used for the qualification of internal wiring of manufactured devices

  18. Tensile and fracture toughness test results of neutron irradiated beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Chaouadi, R.; Moons, F.; Puzzolante, J.L. [Centre d`Etude de l`Energie Nucleaire, Mol (Belgium)

    1998-01-01

    Tensile and fracture toughness test results of four Beryllium grades are reported here. The flow and fracture properties are investigated by using small size tensile and round compact tension specimens. Irradiation was performed at the BR2 material testing reactor which allows various temperature and irradiation conditions. The fast neutron fluence (>1 MeV) ranges between 0.65 and 2.45 10{sup 21} n/cm{sup 2}. In the meantime, un-irradiated specimens were aged at the irradiation temperatures to separate if any the effect of temperature from irradiation damage. Test results are analyzed and discussed, in particular in terms of the effects of material grade, test temperature, thermal ageing and neutron irradiation. (author)

  19. DEWATERING TREATMENT SCALE-UP TESTING RESULTS OF HANFORD TANK WASTES

    International Nuclear Information System (INIS)

    TEDESCHI AR

    2008-01-01

    This report documents CH2M HILL Hanford Group Inc. (CH2M HILL) 2007 dryer testing results in Richland, WA at the AMEC Nuclear Ltd., GeoMelt Division (AMEC) Horn Rapids Test Site. It provides a discussion of scope and results to qualify the dryer system as a viable unit-operation in the continuing evaluation of the bulk vitrification process. A 10,000 liter (L) dryer/mixer was tested for supplemental treatment of Hanford tank low-activity wastes, drying and mixing a simulated non-radioactive salt solution with glass forming minerals. Testing validated the full scale equipment for producing dried product similar to smaller scale tests, and qualified the dryer system for a subsequent integrated dryer/vitrification test using the same simulant and glass formers. The dryer system is planned for installation at the Hanford tank farms to dry/mix radioactive waste for final treatment evaluation of the supplemental bulk vitrification process

  20. The TRANSRAPID propulsion system - development and test results

    Energy Technology Data Exchange (ETDEWEB)

    Henning, U [Siemens AG, Erlangen (Germany); Kamp, P G [Siemens AG, Erlangen (Germany); Hochleitner, J [Siemens AG, Erlangen (Germany)

    1996-12-31

    The structure of the propulsion system for the Transrapid comprises a number of components which are located along the guideway. These drive components are temporarily switched together to form the drive control zones necessary to permit maglev operation over the guideway. The paper describes the development of the stationary propulsion converter with GTO thyristors. The drive components are tested under realistic operating conditions. The test results confirm the performance capability as well as verify the suitability of the concept for use in revenue service. (HW)

  1. Test beam results from the D0 end electromagnetic calorimeter

    International Nuclear Information System (INIS)

    Roe, N.A.

    1991-11-01

    Test beam results are presented for the DO end electromagnetic calorimeter. Data were taken with electrons and pions ranging in energy from 5 GeV to 150 GeV. Results from the analysis of the test beam data are presented on energy resolution and linearity, stability and uniformity of response, position resolution and electron-pion separation

  2. SCTF Core-I test results

    International Nuclear Information System (INIS)

    Adachi, Hiromichi; Sudo, Yukio; Iwamura, Takamichi; Osakabe, Masahiro; Ohnuki, Akira; Hirano, Kemmei

    1982-07-01

    The Slab Core Test Facility (SCTF) of Japan Atomic Energy Research Institute (JAERI) was constructed to investigate two-dimensional thermohydrodynamics in the core and the communication in fluid behavior between the core and the upper plenum during the last part of blowdown, refill and reflood phases of a posturated loss-of-coolant accident (LOCA) of a pressurized water reactor (PWR). In the present report, effects of system pressure on reflooding phenomena shall be discussed based on the data of Tests S1-SH2, S1-01 and S1-02 which are the parameteris tests for system pressure effects belonging to the SCTF Core-I forced flooding test series. Major items discussed in this report are (1) hydrodynamic behavior in the system, (2) core thermal behavior, (3) core heat transfer and (4) two-dimensional hydrodynamic behavior in the pressure vessel including the core. (author)

  3. Results of assembly test of HTTR reactor internals

    International Nuclear Information System (INIS)

    Maruyama, S.; Saikusa, A.; Shiozawa, S.; Tsuji, N.; Miki, T.

    1996-01-01

    The assembly test of the HTTR actual reactor internals had been carried out at the works, prior to their installation in the actual reactor pressure vessel(RPV) at the construction site. The assembly test consists of several items such as examining fabricating precision of each component and alignment of piled-up structures, measuring circumferential coolant velocity profile in the passage between the simulated RPV and the reactor internals as well as under the support plates, measuring by-pass flow rate through gaps between the reactor internals, and measuring the binding force of the core restraint mechanism. Results of the test showed good performance of the HTTR reactor internals. Installation of the reactor internals in the actual RPV was started at the construction site of HTTR in April, 1995. In the installation process, main items of the assembly test at the works were repeated to investigate the reproducibility of installation. (author). 5 refs, 11 figs

  4. Results of HHF tests and metallographic investigation of beryllium HHF mockups

    International Nuclear Information System (INIS)

    Giniaytulin, R.; Komarov, V.; Mazul, I.; Yablokov, N.; Watson, R.; Cadden, C.; Yang, N.

    2000-01-01

    The reliability of the beryllium-armoured elements for any fusion facilities strongly depends from the armour tile geometry and determines by the armour thickness and how it is castellated in the planar dimensions. The mockup with the tile dimensions of 5 x 5 x 5 mm demonstrated best results during the HHF tests at EBTS facility (SNLA). Thermal response test demonstrated the ultimate heat flux level fo 16.6 MW/m 2 without failure of the joint, melting of the beryllium surface limited the level of the heat flux. During thousand cycles by heat flux density of 13.5 MW/m 2 no damages in the Be/CuCrZr joint occurred that was approved by metallographic investigation of the tested and non-tested cross-sections. This paper presents the results of HHF testing with Be-armoured mockup that has optimized armour geometry, 2-D temperature analysis for testing conditions and the results of metallographic analysis. The results are discussed and the recommendations for armour dimensions are also made. (orig.)

  5. Results of recent KROTOS FCI tests. Alumina vs. corium melts

    Energy Technology Data Exchange (ETDEWEB)

    Huhtiniemi, I.; Magallon, D.; Hohmann, H. [Commission of the European Communities, Ispra (Italy). Joint Research Center

    1998-01-01

    Recent results from KROTOS fuel-coolant interaction experiments are discussed. Five tests with alumina were performed under highly subcooled conditions, all of these tests resulted in spontaneous steam explosions. Additionally, four tests were performed at low subcooling to confirm, on one hand, the suppression of spontaneous steam explosions under such conditions and, on the other hand, that such a system is still triggerable using an external initiator. The other test parameters in these alumina tests included the melt superheat and the initial pressure. All the tests in the investigated superheat range (150 K - 750 K) produced a steam explosion and no evidence of the explosion suppression by the elevated initial pressure (in the limited range of 0.1 - 0.375 MPa) was observed in the alumina tests. The corium test series include a test with 3 kg of melt under both subcooled and near saturated conditions at ambient pressure. Two additional tests were performed with subcooled water; one test was performed at an elevated pressure of 0.2 MPa with 2.4 kg of melt and another test with 5.1 kg of melt at ambient pressure. None of these tests with corium produced a propagating energetic steam explosion. However, propagating low energy (about twice the energy of the trigger pulse) events were observed. All corium tests produced significantly higher water level swells during the mixing phase than the corresponding alumina tests. Present experimental evidence suggests that the water depletion in the mixing zone suppresses energetic steam explosions with corium melts at ambient pressure and in the present pour geometry. Processes that could produce such a difference in void generation are discussed. (author)

  6. Summary of ROSA-4 LSTF first phase test program and station blackout (TMLB) test results

    International Nuclear Information System (INIS)

    Tasaka, K.; Kukita, Y.; Anoda, Y.

    1990-01-01

    This paper summarizes major test results obtained at the ROSA-4 Large Scale Test Facility (LSTF) during the first phase of the test program. The results from a station blackout (TMLB) test conducted at the end of the first-phase program are described in some detail. The LSTF is an integral test facility being operated by the Japan Atomic Energy Research Institute for simulation of pressurized water reactor (PWR) thermal-hydraulic responses during small-break loss-of-coolant accidents (SBLOCAs) and operational/abnormal transients. It is a 1/48 volumetrically scaled, full-height, full-pressure simulator of a Westinghouse-type 4-loop PWR. The facility includes two symmetric primary loops each one containing an active inverted-U tube steam generator and an active reactor coolant pump. The loop horizontal legs are sized to conserve the scaled (1/24) volumes as well as the length to the square root of the diameter ratio in order to simulate the two-phase flow regime transitions. The primary objective of the LSTF first-phase program was to define the fundamental PWR thermal-hydraulic responses during SBLOCAs and transients. Most of the tests were conducted with simulated component/operator failures, including unavailability of the high pressure injection system and auxiliary feedwater system, as well as operator failure to take corrective actions. The forty-two first phase tests included twenty-nine SBLOCA tests conducted mainly for cold leg breaks, three abnormal transient tests and ten natural circulation tests. Attempts were made in several of the SBLOCA tests to simulate the plant recovery procedures as well as candidate accident management measures for prevention of high-pressure core melt situation. The natural circulation tests simulated the single-phase and two-phase natural circulation as well as reflux condensation behavior in the primary loops in steady or quasi-steady states

  7. Quantification of Soil Physical Properties by Using X-Ray Computerized Tomography (CT) and Standard Laboratory (STD) Methods

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, Maria Ambert [Iowa State Univ., Ames, IA (United States)

    2003-12-12

    The implementation of x-ray computerized tomography (CT) on agricultural soils has been used in this research to quantify soil physical properties to be compared with standard laboratory (STD) methods. The overall research objective was to more accurately quantify soil physical properties for long-term management systems. Two field studies were conducted at Iowa State University's Northeast Research and Demonstration Farm near Nashua, IA using two different soil management strategies. The first field study was conducted in 1999 using continuous corn crop rotation for soil under chisel plow with no-till treatments. The second study was conducted in 2001 and on soybean crop rotation for the same soil but under chisel plow and no-till practices with wheel track and no-wheel track compaction treatments induced by a tractor-manure wagon. In addition, saturated hydraulic (K{sub s}) conductivity and the convection-dispersion (CDE) model were also applied using long-term soil management systems only during 2001. The results obtained for the 1999 field study revealed no significant differences between treatments and laboratory methods, but significant differences were found at deeper depths of the soil column for tillage treatments. The results for standard laboratory procedure versus CT method showed significant differences at deeper depths for the chisel plow treatment and at the second lower depth for no-till treatment for both laboratory methods. The macroporosity distribution experiment showed significant differences at the two lower depths between tillage practices. Bulk density and percent porosity had significant differences at the two lower depths of the soil column. The results obtained for the 2001 field study showed no significant differences between tillage practices and compaction practices for both laboratory methods, but significant differences between tillage practices with wheel track and no-wheel compaction treatments were found along the soil

  8. Results of MACE tests M0 and M1

    International Nuclear Information System (INIS)

    Spencer, B.W.; Farmer, M.T.; Armstrong, D.R.; Kilsdonk, D.J.; Aeschlimann, R.W.; Fischer, M.

    1992-01-01

    This document discusses the Melt Attack and Coolability Experiment (MACE) Program underway at Argonne National Laboratory under ACE/EPRI sponsorship. The program addresses the efficacy of water to terminate an accident situation if melt progression were to result in a molten core/concrete interaction (MCCI) in the reactor containment. Large-scale experiments are being conducted in parallel with related modeling efforts, involving the addition of water to an MCI already underway. The experiments utilize UO 2 /ZrO 2 /Zr corium mixtures, direct electrical heating for simulation of decay heating, and various types of concrete basemats. Currently the tests involve 430 kg corium mass, 25 cm depth, in a 50 cm square test section. Test MO was a successful scoping test, but the first full size test, Ml, failed to achieve melt-water contact owing to existence of a preexisting bridge crust of corium charge. A heat flux of 3.5 MW/m 2 was measured in MO which removed energy from the corium pool equivalent to its entire heat of solidification prior to abatement by formation of an interfacial crust. The crust subsequently limited heat extraction to 600 kW/m 2 and less. Both tests MO and Ml revealed physical evidence of large pool swelling events which resulted in extrusion (and ejection) of melt into water above the crust, significantly increasing the overall quench and reducing the remaining melt in contact with the concrete. Furthermore, test Ml provided evidence of occasional ''burst mode'' ablation events and one additional important benefit of overlying water -- aerosol capture

  9. The other STDs. Linked with HIV transmission, they are attracting new attention.

    Science.gov (United States)

    Lande, R E

    1992-12-01

    Health officials began neglecting sexually transmitted diseases (STDs) (syphilis, gonorrhea, chlamydia, trichomoniasis, and chancroid) when the AIDS epidemic began. They now refocus efforts on STDs because data indicate that STDs facilitate HIV transmission. Even though the risk of HIV transmission is lower in people with nonulcerative STDs than those with genital ulcers (0-4 vs. 2-5 times), the link between nonulcerative STDs and HIV transmission is a greater problem since nonulcerative STD cases occur more often than genital ulcers. Many AIDS control programs execute STD control activities. Countries must improve existing STD control programs. They should strengthen STD surveillance. Viet Nam has established surveillance sites at STD clinics in 4 cities. Training different health providers in STD control would make STD services accessible to more people. These providers include nurses, midwives, pharmacists, and even traditional healers and should be based at pharmacies and primary health care, maternal and child health, and family planning clinics. Primary health care workers should use symptoms to diagnose and treat STDs rather than laboratory tests. 1 drawback of this syndromic approach is that about 50% of women do not exhibit STD symptoms. STD control programs must guarantee a steady reserve of drugs. In Zimbabwe, primary health clinics receive STD drugs from a decentralized drug distribution system (5-8 warehouses) rather than the older centralized system (1 warehouse). This has reduced the waiting time from 6 months to 4-6 weeks. Programs need to encourage individuals to seek early treatment of STDs via health education campaigns (e.g., mass media), outreach to high risk groups such as prostitutes and the patron, and contact tracing. STD counselors should promote condom use. An STD program in Nairobi, Kenya informs patients to use a condom during sex with any causal sex partner, shows patients how to put on and take off the condom, and tells them where

  10. PISA TESTS IN LATIN AMERICA: RESULTS IN CONTEXT

    Directory of Open Access Journals (Sweden)

    Guillermina Tiramonti

    2014-05-01

    Full Text Available The educational reforms implemented in Latin America in the ‘90s introduced changes in the modes of regulation of educational systems based on the adoption of mechanisms for assessing student achievement. Since 2000, eight Latin-American countries (Argentina, Chile, Uruguay, Colombia, Brazil, Costa Rica, Mexico and Peru are involved in the PISA tests. The article presents a brief review of the social and educational situation of the Region, relevant for the interpretation and comparative analysis of the results of these tests that is presented below.

  11. Results from tests of the Delphi TPC prototype

    International Nuclear Information System (INIS)

    Vilanova, D.

    1985-01-01

    Results from beam tests of a half-scale sector of the Delphi TPC are presented. The spatial resolution is slightly higher than predicted by Monte Carlo simulations, corresponding to an average value of about 300 μm. (orig.)

  12. Radioactive Testing Results in Support of the In-Tank Precipitation Facility - Filtrate Test

    International Nuclear Information System (INIS)

    Hobbs, D.T.

    1998-01-01

    This report documents results investigating the decomposition of excess NaTPB in presence of filtrate from one of the Cycle I Demonstration tests, fulfilling a request by CST Engineering and the ITP Flow Sheet Team

  13. Structural fatigue test results for large wind turbine blade sections

    Science.gov (United States)

    Faddoul, J. R.; Sullivan, T. L.

    1982-01-01

    In order to provide quantitative information on the operating life capabilities of wind turbine rotor blade concepts for root-end load transfer, a series of cantilever beam fatigue tests was conducted. Fatigue tests were conducted on a laminated wood blade with bonded steel studs, a low cost steel spar (utility pole) with a welded flange, a utility pole with additional root-end thickness provided by a swaged collar, fiberglass spars with both bonded and nonbonded fittings, and, finally, an aluminum blade with a bolted steel fitting (Lockheed Mod-0 blade). Photographs, data, and conclusions for each of these tests are presented. In addition, the aluminum blade test results are compared to field failure information; these results provide evidence that the cantilever beam type of fatigue test is a satisfactory method for obtaining qualitative data on blade life expectancy and for identifying structurally underdesigned areas (hot spots).

  14. Drug and alcohol testing results 2009 annual report

    Science.gov (United States)

    2013-11-01

    This is the 15th annual report of the results of the Federal Transit Administrations (FTA) Drug and Alcohol Testing Program. This report summarizes the reporting requirements for calendar year 2009, the requirements of the overall drug and alcohol...

  15. Drug and alcohol testing results 2007 annual report

    Science.gov (United States)

    2009-05-01

    This is the 13th annual report of the results of the Federal Transit Administrations (FTA) Drug and Alcohol Testing Program. This report summarizes the reporting requirements for calendar year 2007, the requirements of the overall drug and alcohol...

  16. Drug and Alcohol Testing Results 2008 Annual Report

    Science.gov (United States)

    2010-09-01

    This is the 14th annual report of the results of the Federal Transit Administration's (FTA) Drug and Alcohol Testing : Program. This report summarizes the reporting requirements for calendar year 2008, the requirements of the overall : drug and alcoh...

  17. Remote Control and Testing of the Interactive TV-Decoder

    Directory of Open Access Journals (Sweden)

    K. Vlcek

    1995-12-01

    Full Text Available The article deals with assembling and application of a complex sequential circuit VHDL (VHSIC (Very High-Speed Integrated Circuit Hardware Description Language model. The circuit model is a core of a cryptographic device for the signal encoding and decoding of discreet transmissions by TV-cable net. The cryptographic algorithm is changable according to the user's wishes. The principles of creation and example implementations are presented in the article. The behavioural model is used to minimize mistakes in the ASICs (Application Specific Integrated Circuits. The circuit implementation uses the FPGA (Field Programmable Gate Array technology. The diagnostics of the circuit is based on remote testing by the IEEE Std 1149.1-1990. The VHDL model of diagnostic subsystem is created as an orthogonal model in relation to the cryptographic circuit VHDL model.

  18. Drug and alcohol testing results 2006 annual report.

    Science.gov (United States)

    2008-08-01

    This is the 12th annual report of the results of the Federal Transit Administration's (FTA) Drug and Alcohol Testing Program. This report summarizes the reporting requirements for calendar year 2006, the requirements of the overall drug and alcohol t...

  19. Chemical compatibility screening test results

    International Nuclear Information System (INIS)

    Nigrey, P.J.; Dickens, T.G.

    1997-12-01

    A program for evaluating packaging components that may be used in transporting mixed-waste forms has been developed and the first phase has been completed. This effort involved the screening of ten plastic materials in four simulant mixed-waste types. These plastics were butadiene-acrylonitrile copolymer rubber, cross-linked polyethylene (XLPE), epichlorohydrin rubber, ethylene-propylene rubber (EPDM), fluorocarbon (Viton or Kel-F), polytetrafluoroethylene, high-density polyethylene (HDPE), isobutylene-isoprene copolymer rubber (butyl), polypropylene, and styrene-butadiene rubber (SBR). The selected simulant mixed wastes were (1) an aqueous alkaline mixture of sodium nitrate and sodium nitrite; (2) a chlorinated hydrocarbon mixture; (3) a simulant liquid scintillation fluid; and (4) a mixture of ketones. The testing protocol involved exposing the respective materials to 286,000 rads of gamma radiation followed by 14-day exposures to the waste types at 60 degrees C. The seal materials were tested using vapor transport rate (VTR) measurements while the liner materials were tested using specific gravity as a metric. For these tests, a screening criterion of 0.9 g/hr/m 2 for VTR and a specific gravity change of 10% was used. Based on this work, it was concluded that while all seal materials passed exposure to the aqueous simulant mixed waste, EPDM and SBR had the lowest VTRs. In the chlorinated hydrocarbon simulant mixed waste, only Viton passed the screening tests. In both the simulant scintillation fluid mixed waste and the ketone mixture simulant mixed waste, none of the seal materials met the screening criteria. For specific gravity testing of liner materials, the data showed that while all materials with the exception of polypropylene passed the screening criteria, Kel-F, HDPE, and XLPE offered the greatest resistance to the combination of radiation and chemicals

  20. Patch Test Results of 775 Patients with Allergic Contact Dermatitis

    Directory of Open Access Journals (Sweden)

    Simin Ada

    2010-12-01

    Full Text Available Background and Design: The allergens responsible for allergic contact dermatitis vary among countries and even between different geographical regions within the same country over time. It is of great importance to perform the patch test at certain intervals, to evaluate the results in different centers and to compare them afterwards. Our aim was to evaluate the patch test results in our patients with allergic contact dermatitis.Material and Method: The records of the patients with allergic contact dermatitis, who had been patch tested between May 1997 and March 2009, were analyzed retrospectively. The demographic features such as age and sex, localization of the contact dermatitis, and the patch test results were recorded. Results: Of the 775 patients, 581 (75.2% were females and 194 (25% males. Of all patients, 735 were patch tested with the European Standard Series, 318 - with both the European Standard Series and cosmetic series, and 40-with cosmetic series alone. Of the patients tested with the European Standard Series, 255 (34.7% had at least one positive reaction. The most frequent allergen in the European Standard Series was nickel sulfate (17.3%, followed by cobalt chloride (7.2%, potassium dichromate (3%, fragrance mix (2.9%, and p-phenylenediamine base (2.6%. Of the 358 patients tested with cosmetic series, 82 (22.9% had at least one positive reaction. The 5 most frequently observed cosmetic series allergens were octyl gallate (3.9%, thimerosal (2.2%, sorbitan sesquioleate (2%, Euxyl K 400 (2% and methyldibromo glutaronitrile (1.4%. Conclusion: Our study shows the contact allergen profile of our center over 12 years. The most common allergens and their frequency differ between centers in various cities in Turkey. Those geographical differences should be re-evaluated by further studies performed in the certain time period. The high frequency of reactions to octyl gallate is an important finding in patients suspected of cosmetic allergy

  1. Results of EMC market surveillance tests for UPS systems

    Energy Technology Data Exchange (ETDEWEB)

    Rajamaeki, J. [Safety Technology Authority, Helsinki (Finland)

    1997-12-31

    This paper reports the first wide electromagnetic compatibility (EMC) market surveillance project in Finland in which the uninterruptible power systems (UPS) on the Finnish market are monitored. Altogether 11 UPS units are EMC tested and the results of these tests are described in this paper. The effect of basic characters of UPS on the level of electromagnetic interference are analysed. (orig.) 3 refs.

  2. Social determinants and sexually transmitted disease disparities.

    Science.gov (United States)

    Hogben, Matthew; Leichliter, Jami S

    2008-12-01

    Social determinants of health play an important role in sexually transmitted disease (STD) transmission and acquisition; consequently, racial and ethnic disparities among social determinants are influences upon disparities in STD rates. In this narrative review, we outline a general model showing the relationship between social determinants and STD outcomes, mediated by epidemiologic context. We then review 4 specific social determinants relevant to STD disparities: segregation, health care, socioeconomics and correctional experiences, followed by 2 facets of the resultant epidemiologic context: core areas and sexual networks. This review shows that disparities exist among the social determinants and that they are related to each other, as well as to core areas, sexual networks, and STD rates. Finally, we discuss the implications of our review for STD prevention and control with particular attention to STD program collaboration and service integration.

  3. Radioactive material package seal tests

    International Nuclear Information System (INIS)

    Madsen, M.M.; Humphreys, D.L.; Edwards, K.R.

    1990-01-01

    General design or test performance requirements for radioactive materials (RAM) packages are specified in Title 10 of the US Code of Federal Regulations Part 71 (US Nuclear Regulatory Commission, 1983). The requirements for Type B packages provide a broad range of environments under which the system must contain the RAM without posing a threat to health or property. Seals that provide the containment system interface between the packaging body and the closure must function in both high- and low-temperature environments under dynamic and static conditions. A seal technology program, jointly funded by the US Department of Energy Office of Environmental Restoration and Waste Management (EM) and the Office of Civilian Radioactive Waste Management (OCRWM), was initiated at Sandia National Laboratories. Experiments were performed in this program to characterize the behavior of several static seal materials at low temperatures. Helium leak tests on face seals were used to compare the materials. Materials tested include butyl, neoprene, ethylene propylene, fluorosilicone, silicone, Eypel, Kalrez, Teflon, fluorocarbon, and Teflon/silicone composites. Because most elastomer O-ring applications are for hydraulic systems, manufacturer low-temperature ratings are based on methods that simulate this use. The seal materials tested in this program with a fixture similar to a RAM cask closure, with the exception of silicone S613-60, are not leak tight (1.0 x 10 -7 std cm 3 /s) at manufacturer low-temperature ratings. 8 refs., 3 figs., 1 tab

  4. Melter operation results in chemical test at Rokkasho Reprocessing Plant

    International Nuclear Information System (INIS)

    Kanehira, Norio; Yoshioka, Masahiro; Muramoto, Hitoshi; Oba, Takaaki; Takahashi, Yuji

    2005-01-01

    Chemical Test of the glass melter system of the Vitrification Facility at Rokkasho Reprocessing Plant (RRP) was performed. In this test, basic performance of heating-up of the melter, melting glass, pouring glass was confirmed using simulated materials. Through these tests and operation of all modes, good results were gained, and training of operators was completed. (author)

  5. Honeywell Cascade Distiller System Performance Testing Interim Results

    Science.gov (United States)

    Callahan, Michael R.; Sargusingh, Miriam

    2014-01-01

    The ability to recover and purify water through physiochemical processes is crucial for realizing long-term human space missions, including both planetary habitation and space travel. Because of their robust nature, distillation systems have been actively pursued as one of the technologies for water recovery. The Cascade Distillation System (CDS) is a vacuum rotary distillation system with potential for greater reliability and lower energy costs than existing distillation systems. The CDS was previously under development through Honeywell and NASA. In 2009, an assessment was performed to collect data to support down-selection and development of a primary distillation technology for application in a lunar outpost water recovery system. Based on the results of this testing, an expert panel concluded that the CDS showed adequate development maturity, TRL-4, together with the best product water quality and competitive weight and power estimates to warrant further development. The Advanced Exploration Systems (AES) Water Recovery Project (WRP) worked to address weaknesses identified by The Panel; namely bearing design and heat pump power efficiency. Testing at the NASA-JSC Advanced Exploration System Water Laboratory (AES Water Lab) using a prototype Cascade Distillation Subsystem (CDS) wastewater processor (Honeywell International, Torrance, Calif.) with test support equipment and control system developed by Johnson Space Center was performed to evaluate performance of the system with the upgrades. The CDS will also have been challenged with ISS analog waste streams and a subset of those being considered for Exploration architectures. This paper details interim results of the AES WRP CDS performance testing.

  6. The Benchmark Test Results of QNX RTOS

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jang Yeol; Lee, Young Jun; Cheon, Se Woo; Lee, Jang Soo; Kwon, Kee Choon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2010-10-15

    A Real-Time Operating System(RTOS) is an Operating System(OS) intended for real-time applications. Benchmarking is a point of reference by which something can be measured. The QNX is a Real Time Operating System(RTOS) developed by QSSL(QNX Software Systems Ltd.) in Canada. The ELMSYS is the brand name of commercially available Personal Computer(PC) for applications such as Cabinet Operator Module(COM) of Digital Plant Protection System(DPPS) and COM of Digital Engineered Safety Features Actuation System(DESFAS). The ELMSYS PC Hardware is being qualified by KTL(Korea Testing Lab.) for use as a Cabinet Operator Module(COM). The QNX RTOS is being dedicated by Korea Atomic Energy Research Institute (KAERI). This paper describes the outline and benchmarking test results on Context Switching, Message Passing, Synchronization and Deadline Violation of QNX RTOS under the ELMSYS PC platform

  7. The Benchmark Test Results of QNX RTOS

    International Nuclear Information System (INIS)

    Kim, Jang Yeol; Lee, Young Jun; Cheon, Se Woo; Lee, Jang Soo; Kwon, Kee Choon

    2010-01-01

    A Real-Time Operating System(RTOS) is an Operating System(OS) intended for real-time applications. Benchmarking is a point of reference by which something can be measured. The QNX is a Real Time Operating System(RTOS) developed by QSSL(QNX Software Systems Ltd.) in Canada. The ELMSYS is the brand name of commercially available Personal Computer(PC) for applications such as Cabinet Operator Module(COM) of Digital Plant Protection System(DPPS) and COM of Digital Engineered Safety Features Actuation System(DESFAS). The ELMSYS PC Hardware is being qualified by KTL(Korea Testing Lab.) for use as a Cabinet Operator Module(COM). The QNX RTOS is being dedicated by Korea Atomic Energy Research Institute (KAERI). This paper describes the outline and benchmarking test results on Context Switching, Message Passing, Synchronization and Deadline Violation of QNX RTOS under the ELMSYS PC platform

  8. Results from Second Round of Remediated Nitrate Salt Surrogate Formulation and Testing

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Geoffrey Wayne [Los Alamos National Laboratory; Leonard, Philip [Los Alamos National Laboratory; Hartline, Ernest Leon [Los Alamos National Laboratory; Tian, Hongzhao [Los Alamos National Laboratory

    2016-04-04

    High Explosives and Technology (M-7) completed the second round of formulation and testing of Remediated Nitrate Salt (RNS) surrogates on March 17, 2016. This report summarizes the results of the work and also includes additional documentation required under test plan PLAN-TA9-2443 Rev B, "Remediated Nitrate Salt (RNS) Surrogate Formulation and Testing Standard Procedure", released February 16, 2016. All formulation and testing was carried out according to PLAN-TA9-2443 Rev B. Results from the first round of formulation and testing were documented in memorandum M7-16-6042, "Results from First Round of Remediated Nitrate Salt Surrogate Formulation and Testing."

  9. SIMS prototype System 3 test results: engineering analysis

    Energy Technology Data Exchange (ETDEWEB)

    1978-08-01

    The results obtained during testing of a closed hydronic drain down solar system designed for space and hot water heating are presented. Data analysis is included which documents the system performance and verifies the suitability of SIMS Prototype System 3 for field installation.

  10. SIMS prototype system 3 test results: Engineering analysis

    Science.gov (United States)

    1978-01-01

    The results obtained during testing of a closed hydronic drain down solar system designed for space and hot water heating is presented. Data analysis is included which documents the system performance and verifies the suitability of SIMS Prototype System 3 for field installation.

  11. EOL3 M0 X-ray Tomography Test Results

    CERN Document Server

    Avramidou, R; Bozhko, N; Borisov, A; Goriatchev, V; Goriatchev, S; Gushin, V; Fakhroutdinov, R; Kojine, A; Kononov, A; Larionov, A; Salomatin, Yu I; Schuh, S; Sedykh, Yu; Tchougouev, A

    2001-01-01

    Results of X-ray tomography test of EOL3 module 0 chamber is presented in the note. Peculiarities of the X-ray tomography of the chamber are discussed. Comparison of the tomography results with predictions of the production site measurements is made.

  12. Aerodynamic and Acoustic Flight Test Results and Results for the Stratospheric Observatory for Infrared Astronomy

    Science.gov (United States)

    Cumming, Stephen B.; Smith, Mark S.; Cliatt, Larry J.; Frederick, Michael A.

    2014-01-01

    As part of the Stratospheric Observatory for Infrared Astronomy program, a 747SP airplane was modified to carry a 2.5-m telescope in the aft section of the fuselage. The resulting airborne observatory allows for observations above 99 percent of the water vapor in the atmosphere. The open cavity created by the modifications had the potential to significantly affect the airplane in the areas of aerodynamics and acoustics. Several series of flight tests were conducted to clear the operating envelope of the airplane for astronomical observations, planned to be performed between the altitudes of 35,000 ft and 45,000 ft. The flight tests were successfully completed. Cavity acoustics were below design limits, and the overall acoustic characteristics of the cavity were better than expected. The modification did have some effects on the stability and control of the airplane, but these effects were not significant. Airplane air data systems were not affected by the modifications. This paper describes the methods used to examine the aerodynamics and acoustic data from the flight tests and provides a discussion of the flight-test results in the areas of cavity acoustics, stability and control, and air data.

  13. Thermosyphon Flooding in Reduced Gravity Environments Test Results

    Science.gov (United States)

    Gibson, Marc A.; Jaworske, Donald A.; Sanzi, Jim; Ljubanovic, Damir

    2013-01-01

    The condenser flooding phenomenon associated with gravity aided two-phase thermosyphons was studied using parabolic flights to obtain the desired reduced gravity environment (RGE). The experiment was designed and built to test a total of twelve titanium water thermosyphons in multiple gravity environments with the goal of developing a model that would accurately explain the correlation between gravitational forces and the maximum axial heat transfer limit associated with condenser flooding. Results from laboratory testing and parabolic flights are included in this report as part I of a two part series. The data analysis and correlations are included in a follow on paper.

  14. Wind tunnel test IA300 analysis and results, volume 1

    Science.gov (United States)

    Kelley, P. B.; Beaufait, W. B.; Kitchens, L. L.; Pace, J. P.

    1987-01-01

    The analysis and interpretation of wind tunnel pressure data from the Space Shuttle wind tunnel test IA300 are presented. The primary objective of the test was to determine the effects of the Space Shuttle Main Engine (SSME) and the Solid Rocket Booster (SRB) plumes on the integrated vehicle forebody pressure distributions, the elevon hinge moments, and wing loads. The results of this test will be combined with flight test results to form a new data base to be employed in the IVBC-3 airloads analysis. A secondary objective was to obtain solid plume data for correlation with the results of gaseous plume tests. Data from the power level portion was used in conjunction with flight base pressures to evaluate nominal power levels to be used during the investigation of changes in model attitude, eleveon deflection, and nozzle gimbal angle. The plume induced aerodynamic loads were developed for the Space Shuttle bases and forebody areas. A computer code was developed to integrate the pressure data. Using simplified geometrical models of the Space Shuttle elements and components, the pressure data were integrated to develop plume induced force and moments coefficients that can be combined with a power-off data base to develop a power-on data base.

  15. Containment liner plate anchors and steel embedments test results

    International Nuclear Information System (INIS)

    Chang-Lo, P.L.; Johnson, T.E.; Pfeifer, B.W.

    1977-01-01

    This paper summarizes test data on shear load and deformation capabilities for liner plate line anchors and structural steel embedments in reinforced and prestressed concrete nuclear containments. Reinforced and prestressed nuclear containments designed and constructed in the United States are lined with a minimum of 0.64 cm steel plate. The liner plates are anchored by the use of either studs or structural members (line anchors) which usually run in the vertical direction. This paper will only address line anchors. Static load versus displacement test data is necessary to assure that the design is adequate for the maximum loads. The test program for the liner anchors had the following major objectives: determine load versus displacement data for a variety of anchors considering structural tees and small beams with different weld configurations, from the preceding tests, determine which anchors would lead to an economical and extremely safe design and test these anchors for cyclic loads resulting from thermal fluctuations. Various concrete embeds in the containment and other structures are subjected to loads such as pipe rupture which results in shear. Since many of the loads are transient by nature, it is necessary to know the load-displacement relationship so that the energy absorption can be determined. The test program for the embeds had the following objectives: determine load-displacement relationship for various size anchors from 6.5 cm 2 to 26 cm 2 with maximum capacities of approximately 650 kN; determine the effect of various anchor width-to-thickness ratios for the same shear area

  16. Persian competing word test: Development and preliminary results in normal children

    Directory of Open Access Journals (Sweden)

    Mohammad Ebrahim Mahdavi

    2008-12-01

    Full Text Available Background and Aim: Assessment of central auditory processing skills needs various behavioral tests in format of a test battery. There is a few Persian speech tests for documenting central auditory processing disorders. The purpose of this study was developing a dichotic test formed of one-syllabic words suitable for evaluation of central auditory processing in Persian language children and reporting its preliminary results in a group of normal children.Materials and Methods: Persian words in competing manner test was developed utilizing most frequent monosyllabic words in children storybooks reported in the previous researches. The test was performed at MCL on forty-five normal children (39 right-handed and 6 left-handed aged 5-11 years. The children did not show any obvious problem in hearing, speech, language and learning. Free (n=28 and directed listening (n=17 tasks were investigated.Results: The results show that in directed listening task, there is significant advantage for performance of pre-cued ear relative to opposite side. Right ear advantage is evident in free recall condition. Average performance of the children in directed recall is significantly better than free recall. Average row score of the test increases with the children age.Conclusion: Persian words in competing manner test as a dichotic test, can show major characteristics of dichotic listening and effect of maturation of central auditory system on it in normal children.

  17. Multi-bundle shashlik calorimeter prototypes beam-test results

    International Nuclear Information System (INIS)

    Badier, J.; Bloch, P.; Bityukov, S.; Bordalo, P.; Busson, P.; Charlot, C.; Dobrzynski, L.; Golutvin, I.; Guschin, E.; Issakov, V.; Ivanchenko, I.; Klimenko, V.; Marin, V.; Moissenz, P.; Obraztsov, V.; Ostankov, A.; Popov, V.; Puljak, I.; Ramos, S.; Seez, C.; Sergueev, S.; Soushkov, V.; Tanaka, R.; Varela, J.; Virdee, T.S.; Zaitchenko, A.; Zamiatin, N.

    1995-01-01

    The first beam-test results for two- and three-bundle shashlik tower prototypes are described. We found that the spatial resolution, the uniformity of energy response, the calorimeter reliability and hermeticity and also two showers separation are improved in multi-bundle design approach. ((orig.))

  18. Thermal Analysis of Low Layer Density Multilayer Insulation Test Results

    Science.gov (United States)

    Johnson, Wesley L.

    2011-01-01

    Investigation of the thermal performance of low layer density multilayer insulations is important for designing long-duration space exploration missions involving the storage of cryogenic propellants. Theoretical calculations show an analytical optimal layer density, as widely reported in the literature. However, the appropriate test data by which to evaluate these calculations have been only recently obtained. As part of a recent research project, NASA procured several multilayer insulation test coupons for calorimeter testing. These coupons were configured to allow for the layer density to be varied from 0.5 to 2.6 layer/mm. The coupon testing was completed using the cylindrical Cryostat-l00 apparatus by the Cryogenics Test Laboratory at Kennedy Space Center. The results show the properties of the insulation as a function of layer density for multiple points. Overlaying these new results with data from the literature reveals a minimum layer density; however, the value is higher than predicted. Additionally, the data show that the transition region between high vacuum and no vacuum is dependent on the spacing of the reflective layers. Historically this spacing has not been taken into account as thermal performance was calculated as a function of pressure and temperature only; however the recent testing shows that the data is dependent on the Knudsen number which takes into account pressure, temperature, and layer spacing. These results aid in the understanding of the performance parameters of MLI and help to complete the body of literature on the topic.

  19. Clinical Trial Results Summary for Laypersons: A User Testing Study.

    Science.gov (United States)

    Raynor, D K; Myers, L; Blackwell, K; Kress, B; Dubost, A; Joos, A

    2018-01-01

    To apply "user testing" to maximize readability and acceptability of a Clinical Trial Results Laypersons Summary-a new European requirement. "User testing" (using questionnaire and semistructured interview) assessed whether people could find and understand key points. Findings were used to improve content and design, prior to retesting. Participants had a range of levels of health literacy and there was a higher education group. Participants accessed the summary on screen. In round 1 we tested 12 points of information. In round 2 a revised summary addressing round 1 findings was tested, leading to a third final version. In round 1, 2 of 12 points of information did not reach the target and interviews raised further format and content issues (some distracting technical explanations and inability to find or understand the 2 main study purposes). These findings informed revisions for the version tested in round 2, with 2 different points not reaching the target (inclusion criteria relating to duration of seasonal allergies and how researchers found out about participants' symptoms). Identified problems in both rounds were addressed and reflected in the final version. Despite improvements, participants did not consistently understand that summaries were intended for the public, or to only interpret results of single trials in the context of additional trials. All readers, including those with higher education, found the clear and straightforward language acceptable. Applying "user testing" resulted in a largely health-literate summary suitable for people across a range of backgrounds.

  20. Data on test results of vessel cooling system of high temperature engineering test reactor

    International Nuclear Information System (INIS)

    Saikusa, Akio; Nakagawa, Shigeaki; Fujimoto, Nozomu; Tachibana, Yukio; Iyoku, Tatsuo

    2003-02-01

    High Temperature Engineering Test Reactor (HTTR) is the first graphite-moderated helium gas cooled reactor in Japan. The rise-to-power test of the HTTR started on September 28, 1999 and thermal power of the HTTR reached its full power of 30 MW on December 7, 2001. Vessel Cooling System (VCS) of the HTTR is the first Reactor Cavity Cooling System (RCCS) applied for High Temperature Gas Cooled Reactors. The VCS cools the core indirectly through the reactor pressure vessel to keep core integrity during the loss of core flow accidents such as depressurization accident. Minimum heat removal of the VCS to satisfy its safety requirement is 0.3MW at 30 MW power operation. Through the performance test of the VCS in the rise-to-power test of the HTTR, it was confirmed that the VCS heat removal at 30 MW power operation was higher than 0.3 MW. This paper shows outline of the VCS and test results on the VCS performance. (author)

  1. Do sediment type and test durations affect results of laboratory-based, accelerated testing studies of permeable pavement clogging?

    Science.gov (United States)

    Nichols, Peter W B; White, Richard; Lucke, Terry

    2015-04-01

    Previous studies have attempted to quantify the clogging processes of Permeable Interlocking Concrete Pavers (PICPs) using accelerated testing methods. However, the results have been variable. This study investigated the effects that three different sediment types (natural and silica), and different simulated rainfall intensities, and testing durations had on the observed clogging processes (and measured surface infiltration rates) of laboratory-based, accelerated PICP testing studies. Results showed that accelerated simulated laboratory testing results are highly dependent on the type, and size of sediment used in the experiments. For example, when using real stormwater sediment up to 1.18 mm in size, the results showed that neither testing duration, nor stormwater application rate had any significant effect on PICP clogging. However, the study clearly showed that shorter testing durations generally increased clogging and reduced the surface infiltration rates of the models when artificial silica sediment was used. Longer testing durations also generally increased clogging of the models when using fine sediment (<300 μm). Results from this study will help researchers and designers better anticipate when and why PICPs are susceptible to clogging, reduce maintenance and extend the useful life of these increasingly common stormwater best management practices. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Almagate interference in breath test results for the diagnosis of Helicobacter pylori infection

    Directory of Open Access Journals (Sweden)

    Carles Pons

    2014-08-01

    Full Text Available Background: Infection by Helicobacter pylori is common and affects both genders at any age. The 13C-urea breath test is a widely used test for the diagnosis of this infection. However, multiple drugs used for the treatment of Helicobacter pylori infection symptoms have interactions with this breath test that generate false negative results. This observational study was to assess the potential interaction between almagate and the breath test. Methods: Thirty subjects on almagate therapy who underwent a breath test were included. If the result was negative, almagate was withdrawn for a month and the breath test was then repeated. Results: In general, 51.9 % of assessed subjects had a negative result after the first test, and 100 % of these also had a negative result after the second test. Conclusions: It was concluded that the use of almagate does not interfere in breath test results. These results provide a drug therapy option for the treatment of symptoms associated with Helicobacter pylori infection during the diagnostic process.

  3. Electromagnetic results of the Japanese LCT coil's domestic test

    International Nuclear Information System (INIS)

    Nishi, Masataka; Okuno, Kiyoshi; Takahashi, Yoshikazu; Tsuji, Hiroshi; Ando, Toshinari; Shimamoto, Susumu

    1984-01-01

    The domestic test of the Japanese LCT coil was carried out in 1982. During this test, the coil was charged up to the single coil's 100% state (10.22kA, 6.4T, 106MJ) four times and experienced no quenche. at the 100% charging state, coil stability was tested by using heaters installed in the conductor. A half turn length normal zone (about 5 m) generated by heaters was spontenously disappeared in 2 second. This normalized zone included the highest magnetic field position. The transport current which gives the stable limit is extraporated to be about 12.5kA at 8T by this test result. The dump test was carried out also from the 100% charging state. At that time, about 90% of the coil's stored energy was extracted by the dump resistor and the coil was not damaged. (author)

  4. Use of laboratory test results in patient management by clinicians in Malawi.

    Science.gov (United States)

    Moyo, Kundai; Porter, Carol; Chilima, Ben; Mwenda, Reuben; Kabue, Mark; Zungu, Lutho; Sarr, Abdoulaye

    2015-11-18

    Malawi has a high burden of infectious disease. The expansion of programmes targeting these diseases requires a strong laboratory infrastructure to support both diagnosis and treatment. To assess the use of laboratory test results in patient management and to determine the requirements for improving laboratory services. A cross-sectional study was conducted in 2012 to survey practising clinicians. Two hospitals were purposively selected for observations of clinicians ordering laboratory tests. Twelve management-level key informants were interviewed. Descriptive statistics were conducted. A total of 242 clinicians were identified and 216 (89%) were interviewed. Of these, 189 (87%) reported doubting laboratory test results at some point. Clinicians most often doubted the quality of haematology (67%), followed by malaria (53%) and CD4 (22%) test results. A total of 151 (70%) clinicians reported using laboratory tests results in patient management. Use of laboratory test results at all times in patient management varied by the type of health facility ( P management. Key informants reported that the quality of laboratory services was good and useful, but that services were often unavailable. Gaps in the public laboratory system were evident. Key recommendations to enhance the use of laboratory test results in patient management were to strengthen the supply chain, reduce turn-around times, improve the test menu and improve the laboratory infrastructure.

  5. Updated Results of Ultrasonic Transducer Irradiation Test

    Energy Technology Data Exchange (ETDEWEB)

    Daw, Joshua; Palmer, Joe [Idaho National Laboratory, P.O. Box 1625, MS 4112, Idaho Falls, ID, 38415-3840 (United States); Ramuhalli, Pradeep; Keller, Paul; Montgomery, Robert [Pacific Northwest National Laboratory, 902 Battelle Blvd. Richland, WA, 99354 (United States); Chien, Hual-Te [Argonne National Laboratory, 9700 S. Cass Avenue Argonne, IL, 60439 (United States); Tittmann, Bernhard; Reinhardt, Brian [Pennsylvania State University, 212 Earth and Engr. Sciences Building, University Park, PA, 16802 (United States); Kohse, Gordon [Massachusetts Institute of Technology, 77 Massachusetts Ave. Cambridge, MA 02139 (United States); Rempe, Joy [Rempe and Associates, LLC, 360 Stillwater, Idaho Falls, ID 83404 (United States); Villard, J.F. [Commissariat a l' energie atomique et aux energies alternatives, Centre d' etudes de Cadarache, 13108 Saint-Paul-lez-Durance (France)

    2015-07-01

    Ultrasonic technologies offer the potential for high accuracy and resolution in-pile measurement of a range of parameters, including geometry changes, temperature, crack initiation and growth, gas pressure and composition, and microstructural changes. Many Department of Energy-Office of Nuclear Energy (DOE-NE) programs are exploring the use of ultrasonic technologies to provide enhanced sensors for in-pile instrumentation during irradiation testing. For example, the ability of small diameter ultrasonic thermometers (UTs) to provide a temperature profile in candidate metallic and oxide fuel would provide much needed data for validating new fuel performance models. These efforts are limited by the lack of identified ultrasonic transducer materials capable of long term performance under irradiation test conditions. To address this need, the Pennsylvania State University (PSU) was awarded an Advanced Test Reactor National Scientific User Facility (ATR NSUF) project to evaluate the performance of promising magnetostrictive and piezoelectric transducers in the Massachusetts Institute of Technology Research Reactor (MITR) up to a fast fluence of at least 10{sup 21} n/cm{sup 2}. A multi-National Laboratory collaboration funded by the Nuclear Energy Enabling Technologies Advanced Sensors and Instrumentation (NEET-ASI) program also provided initial support for this effort. This irradiation, which started in February 2014, is an instrumented lead test and real-time transducer performance data are collected along with temperature and neutron and gamma flux data. The irradiation is ongoing and will continue to approximately mid-2015. To date, very encouraging results have been attained as several transducers continue to operate under irradiation. (authors)

  6. 76 FR 50145 - Energy Conservation Program: Test Procedures for Residential Clothes Dryers

    Science.gov (United States)

    2011-08-12

    ... standby mode and off mode power use for those products; and (2) adopted several amendments to the clothes...-BT-STD-0010. DOE requests information and data on consumer usage habits regarding cycles selected for...

  7. TEST RESULTS FOR LHC INSERTION REGION DEPOLE MAGNETS

    International Nuclear Information System (INIS)

    MURATORE, J.; JAIN, A.; ANERELLA, M.; COSSOLINO, J.

    2005-01-01

    The Superconducting Magnet Division at Brookhaven National Laboratory (BNL) has made 20 insertion region dipoles for the Large Hadron Collider (LHC) at CERN. These 9.45 m-long, 8 cm aperture magnets have the same coil design as the arc dipoles now operating in the Relativistic Heavy Ion Collider (RHIC) at BNL and are of single aperture, twin aperture, and double cold mass configurations. They are required to produce fields up to 4.14 T for operation at 7.56 TeV. Eighteen of these magnets have been tested at 4.5 K using either forced flow supercritical helium or liquid helium. The testing was especially important for the twin aperture models, whose construction was very different from the RHIC dipoles, except for the coil design. This paper reports on the results of these tests, including spontaneous quench performance, verification of quench protection heater operation, and magnetic field quality

  8. Using Large Scale Test Results for Pedagogical Purposes

    DEFF Research Database (Denmark)

    Dolin, Jens

    2012-01-01

    The use and influence of large scale tests (LST), both national and international, has increased dramatically within the last decade. This process has revealed a tension between the legitimate need for information about the performance of the educational system and teachers to inform policy......, and the teachers’ and students’ use of this information for pedagogical purposes in the classroom. We know well how the policy makers interpret and use the outcomes of such tests, but we know less about how teachers make use of LSTs to inform their pedagogical practice. An important question is whether...... there is a contradiction between the political system’s use of LST and teachers’ (possible) pedagogical use of LST. And if yes: What is a contradiction based on? This presentation will give some results from a systematic review on how tests have influenced the pedagogical practice. The research revealed many of the fatal...

  9. Nonlinear Analysis and Preliminary Testing Results of a Hybrid Wing Body Center Section Test Article

    Science.gov (United States)

    Przekop, Adam; Jegley, Dawn C.; Rouse, Marshall; Lovejoy, Andrew E.; Wu, Hsi-Yung T.

    2015-01-01

    A large test article was recently designed, analyzed, fabricated, and successfully tested up to the representative design ultimate loads to demonstrate that stiffened composite panels with through-the-thickness reinforcement are a viable option for the next generation large transport category aircraft, including non-conventional configurations such as the hybrid wing body. This paper focuses on finite element analysis and test data correlation of the hybrid wing body center section test article under mechanical, pressure and combined load conditions. Good agreement between predictive nonlinear finite element analysis and test data is found. Results indicate that a geometrically nonlinear analysis is needed to accurately capture the behavior of the non-circular pressurized and highly-stressed structure when the design approach permits local buckling.

  10. Comparison of transient PCRV model test results with analysis

    International Nuclear Information System (INIS)

    Marchertas, A.H.; Belytschko, T.B.

    1979-01-01

    Comparisons are made of transient data derived from simple models of a reactor containment vessel with analytical solutions. This effort is a part of the ongoing process of development and testing of the DYNAPCON computer code. The test results used in these comparisons were obtained from scaled models of the British sodium cooled fast breeder program. The test structure is a scaled model of a cylindrically shaped reactor containment vessel made of concrete. This concrete vessel is prestressed axially by holddown bolts spanning the top and bottom slabs along the cylindrical walls, and is also prestressed circumferentially by a number of cables wrapped around the vessel. For test purposes this containment vessel is partially filled with water, which comes in direct contact with the vessel walls. The explosive charge is immersed in the pool of water and is centrally suspended from the top of the vessel. The tests are very similar to the series of tests made for the COVA experimental program, but the vessel here is the prestressed concrete container. (orig.)

  11. Field test of a leak detection system: planning, execution and results

    Energy Technology Data Exchange (ETDEWEB)

    Sampaio da Silva; Daniel; Melo Filho, Silvio A.; Niehues de Farias, Mauro; Pacheco, Anderson [Petrobas Transporte SA - TRANSPETRO, (Brazil)

    2010-07-01

    The OLAPA pipeline (Brazil) with its 97.6 km in length crosses difficult environment with a combination of mountain and dense forest. The non-detection of leaks in this kind of pipeline would have serious consequences. This pipeline was chosen for testing the performance of a new TRANSPETRO leak detection system. This paper reports the testing process of the new leakage detection method carried out on the OLAPA pipeline. TRANSPETRO decided to test the leakwarn system which is a computational pipeline monitoring (CPM) method which and can be integrated into their SCADA system. The CPM uses the mass balance principle with line pack change to analyze the pipeline operational parameters. The tests consisted of comparing the theoretical results with in-field results of alarm times obtained from controlled removal of product, simulating a real leak. Three leaks were tested in different states of operation and size of leak. It was found that the results were compatible with the expected alarm time.

  12. Unclonable RFID-based tag-seal for storage containers

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Todd [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hamlet, Jason [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Martin, Mitchell Tyler [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-10-01

    We are using the DoD MIL-STD as our guide for microelectronics aging (MIL-STD 883J, Method 1016.2: Life/Reliability Characterization Tests). In that document they recommend aging at 3 temperatures between 200-300C, separated by at least 25C, with the supply voltage at the maximum recommended voltage for the devices at 125C (3.6V in our case). If that voltage causes excessive current or power then it can be reduced and the duration of the tests extended. The MIL-STD also recommends current limiting resistors in series with the supply. Since we don’t have much time and we may not have enough ovens and other equipment, two temperatures separated by at least 50C would be an acceptable backup plan. To ensure a safe range of conditions is used, we are executing 24-hour step tests. For these, we will apply the stress for 24 hours and then measure the device to make sure it wasn’t damaged. During the stress the PUFs should be exercised, but we don’t need to measure their response. Rather, at set intervals our devices should be returned to nominal temperature (under bias), and then measured. The MIL-STD puts these intervals at 4, 8, 16, 32, 64, 128, 256, 512 and 1000 hours, although the test can be stopped early if 75% of the devices have failed. A final recommendation per the MIL-STD is that at least 40 devices should be measured under each condition. Since we only have 25 parts, we will place 10 devices in each of two stress conditions.

  13. Is the psychological impact of genetic testing moderated by support and sharing of test results to family and friends?

    Science.gov (United States)

    Lapointe, Julie; Dorval, Michel; Noguès, Catherine; Fabre, Roxane; Julian-Reynier, Claire

    2013-12-01

    Receiving the results of genetic tests for a breast and ovarian cancer susceptibility can be a stressful experience. Here we studied the effects of social support (SS) and the sharing of test results on the psychological impact of BRCA1/2 test result disclosure. We also compared carriers and non-carriers on sharing, SS and psychological impact. Five-hundred and twenty-two unaffected women were followed prospectively for 2 years after receiving their test results. Psychological impact was measured on the impact of event scale. Multivariate multi-level models were used, and all the analyses were stratified depending on mutation status (carriers vs non-carriers). Two weeks after receiving their BRCA1/2 results, carriers had shared their test results less frequently than non-carriers (p test results was not significantly associated with psychological impact. Availability of SS was significantly associated with better psychological adjustment across time among carriers (p importance of SS should be stressed, and possible ways of enlisting people in their entourage for this purpose should be discussed in the context of clinical encounters.

  14. Trends in receipt of sexually transmitted disease services among women 15 to 44 years old in the United States, 2002 to 2006-2010.

    Science.gov (United States)

    Haderxhanaj, Laura T; Gift, Thomas L; Loosier, Penny S; Cramer, Ryan C; Leichliter, Jami S

    2014-01-01

    To describe recent trends in the receipt of sexually transmitted disease (STD) services among women (age, 15-44 years) from 2002 to 2006-2010 using the National Survey of Family Growth. We analyzed trends in demographics, health insurance, and visit-related variables of women reporting receipt of STD services (counseling, testing, or treatment) in the past 12 months. We also analyzed trends in the source of STD services and the payment method used. Receipt of STD services reported by women in the past 12 months increased from 2002 (12.6%) to 2006-2010 (16.0%; P < 0.001). Receipt of services did not increase among adolescents (P = 0.592). Among women receiving STD services from a private doctor/HMO, the percentage with private insurance decreased over time (74.6%-66.8%), whereas the percentage with Medicaid increased (12.8%-19.7%; P = 0.020). For women receiving STD services at a public clinic or nonprimary care facility, there were no statistically significant differences by demographics, except that fewer adolescents but more young adults reported using a public clinic over time (P = 0.038). Among women who reported using Medicaid as payment, receipt of STD services at a public clinic significantly decreased (36.8%-25.4%; P = 0.019). For women who paid for STD services with private insurance, the only significant difference was an increase in having a copay over time (61.3%-70.1%; P = 0.012). Despite a significant increase in receipt of STD services over time, many women at risk for STDs did not receive services including adolescents. In addition, we identified important shifts in payment methods during this time frame.

  15. Test Results of the ALICE-HMPID Detector Commissioning

    CERN Document Server

    Volpe, G

    2008-01-01

    The ALICE High Momentum Particle Identification Detector (HMPID) consists of seven identical proximity focusing RICH counters. It covers in total 11 m2, exploiting large area CsI photocathodes for Cherenkov light imaging. The detector is installed in the ALICE solenoid, ready for the data acquisition. By means of the Detector Control System, the Front-end (FEE) and the Readout (R/O) electronics, the MWPC high voltages, the cooling and the gas system have been tested. The HMPID module gas pressure, temperature, current and voltage trends have been monitored and archived in the ORACLE database. In this paper a comprehensive review on the test results is presented.

  16. 7 CFR 29.431 - Handling of imported tobacco pending test results.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Handling of imported tobacco pending test results. 29.431 Section 29.431 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING... tobacco pending test results. After an individual shipment of imported flue-cured or burley tobacco has...

  17. Challenges in interpretation of thyroid hormone test results

    Directory of Open Access Journals (Sweden)

    Lalić Tijana

    2016-01-01

    Full Text Available Introduction. In interpreting thyroid hormones results it is preferable to think of interference and changes in concentration of their carrier proteins. Outline of Cases. We present two patients with discrepancy between the results of thyroid function tests and clinical status. The first case presents a 62-year-old patient with a nodular goiter and Hashimoto thyroiditis. Thyroid function test showed low thyroid-stimulating hormone (TSH and normal to low fT4. By determining thyroid status (ТSH, T4, fT4, T3, fT3 in two laboratories, basal and after dilution, as well as thyroxine-binding globulin (TBG, it was concluded that the thyroid hormone levels were normal. The results were influenced by heterophile antibodies leading to a false lower TSH level and suspected secondary hypothyroidism. The second case, a 40-year-old patient, was examined and followed because of the variable size thyroid nodule and initially borderline elevated TSH, after which thyroid status showed low level of total thyroid hormones and normal TSH. Based on additional analysis it was concluded that low T4 and T3 were a result of low TBG. It is a hereditary genetic disorder with no clinical significance. Conclusion. Erroneous diagnosis of thyroid disorders and potentially harmful treatment could be avoided by proving the interference or TBG deficiency whenever there is a discrepancy between the thyroid function results and the clinical picture.

  18. Test Results for the Automated Rendezvous and Capture System

    Science.gov (United States)

    Cruzen, Craig; Dabney, Richard; Lomas, James

    1999-01-01

    The Automated Rendezvous and Capture (AR&C) system was designed and tested at NASA's Marshall Space Flight Center (MSFC) to demonstrate technologies and mission strategies for automated rendezvous and docking of spacecraft in Earth orbit, The system incorporates some of the latest innovations in Global Positioning, System space navigation, laser sensor technologies and automated mission sequencing algorithms. The system's initial design and integration was completed in 1998 and has undergone testing at MSFC. This paper describes the major components of the AR&C system and presents results from the official system tests performed in MSFC's Flight Robotics Laboratory with digital simulations and hardware in the loop tests. The results show that the AR&C system can safely and reliably perform automated rendezvous and docking missions in the absence of system failures with 100 percent success. When system failures are included, the system uses its automated collision avoidance maneuver logic to recover in a safe manner. The primary objective of the AR&C project is to prove that by designing a safe and robust automated system, mission operations cost can be reduced by decreasing the personnel required for mission design, preflight planning and training required for crewed rendezvous and docking missions.

  19. Innovation in sexually transmitted disease and HIV prevention: internet and mobile phone delivery vehicles for global diffusion.

    Science.gov (United States)

    Swendeman, Dallas; Rotheram-Borus, Mary Jane

    2010-03-01

    Efficacious behavioral interventions and practices have not been universally accepted, adopted, or diffused by policy makers, administrators, providers, advocates, or consumers. Biomedical innovations for sexually transmitted disease (STD) and HIV prevention have been embraced but their effectiveness is hindered by behavioral factors. Behavioral interventions are required to support providers and consumers for adoption and diffusion of biomedical innovations, protocol adherence, and sustained prevention for other STDs. Information and communication technology such as the Internet and mobile phones can deliver behavioral components for STD/HIV prevention and care to more people at less cost. Recent innovations in STD/HIV prevention with information and communication technology-mediated behavioral supports include STD/HIV testing and partner interventions, behavioral interventions, self-management, and provider care. Computer-based and Internet-based behavioral STD/HIV interventions have demonstrated efficacy comparable to face-to-face interventions. Mobile phone STD/HIV interventions using text-messaging are being broadly utilized but more work is needed to demonstrate efficacy. Electronic health records and care management systems can improve care, but interventions are needed to support adoption. Information and communication technology is rapidly diffusing globally. Over the next 5-10 years smart-phones will be broadly disseminated, connecting billions of people to the Internet and enabling lower cost, highly engaging, and ubiquitous STD/HIV prevention and treatment support interventions.

  20. Advanced Stirling Convertor Durability Testing: Plans and Interim Results

    Science.gov (United States)

    Meer, David W.; Oriti, Salvatore M.

    2012-01-01

    The U.S. Department of Energy (DOE), Lockheed Martin Corporation (LM), and NASA Glenn Research Center (GRC) have been developing the Advanced Stirling Radioisotope Generator (ASRG) for use as a power system for space science missions. In support of this program, GRC has been involved in testing Stirling convertors, including the Advanced Stirling Convertor (ASC), for use in the ASRG. This testing includes electromagnetic interference/compatibility (EMI/EMC), structural dynamics, advanced materials, organics, and unattended extended operation. The purpose of the durability tests is to experimentally demonstrate the margins in the ASC design. Due to the high value of the hardware, previous ASC tests focused on establishing baseline performance of the convertors within the nominal operating conditions. The durability tests present the first planned extension of the operating conditions into regions beyond those intended to meet the product spec, where the possibility exists of lateral contact, overstroke, or over-temperature events. These tests are not intended to cause damage that would shorten the life of the convertors, so they can transition into extended operation at the conclusion of the tests. This paper describes the four tests included in the durability test sequence: 1) start/stop cycling, 2) exposure to constant acceleration in the lateral and axial directions, 3) random vibration at increased piston amplitude to induce contact events, and 4) overstroke testing to simulate potential failures during processing or during the mission life where contact events could occur. The paper also summarizes the analysis and simulation used to predict the results of each of these tests.

  1. Commissioning and First Results from the Fermilab Cryomodule Test Stand

    Energy Technology Data Exchange (ETDEWEB)

    Harms, Elvin; et al.

    2017-05-01

    A new test stand dedicated to SRF cryomodule testing, CMTS1, has been commissioned and is now in operation at Fermilab. The first device to be cooled down and powered in this facility is the prototype 1.3 GHz cryomodule assembled at Fermilab for LCLS-II. We describe the demonstrated capabilities of CMTS1, report on steps taken during commissioning, provide an overview of first test results, and survey future plans.

  2. The Dornier 328 Acoustic Test Cell (ATC) for interior noise tests and selected test results

    Science.gov (United States)

    Hackstein, H. Josef; Borchers, Ingo U.; Renger, Klaus; Vogt, Konrad

    1992-01-01

    To perform acoustic studies for achieving low noise levels for the Dornier 328, an acoustic test cell (ATC) of the Dornier 328 has been built. The ATC consists of a fuselage section, a realistic fuselage suspension system, and three exterior noise simulation rings. A complex digital 60 channel computer/amplifier noise generation system as well as multichannel digital data acquisition and evaluation system have been used. The noise control tests started with vibration measurements for supporting acoustic data interpretation. In addition, experiments have been carried out on dynamic vibration absorbers, the most important passive noise reduction measure for low frequency propeller noise. The design and arrangement of the current ATC are presented. Furthermore, exterior noise simulation as well as data acquisition are explained. The most promising results show noise reduction due to synchrophasing and dynamic vibration absorbers.

  3. Benchmark Calculations on Halden IFA-650 LOCA Test Results

    International Nuclear Information System (INIS)

    Ek, Mirkka; Kekkonen, Laura; Kelppe, Seppo; Stengaard, J.O.; Josek, Radomir; Wiesenack, Wolfgang; Aounallah, Yacine; Wallin, Hannu; Grandjean, Claude; Herb, Joachim; Lerchl, Georg; Trambauer, Klaus; Sonnenburg, Heinz-Guenther; Nakajima, Tetsuo; Spykman, Gerold; Struzik, Christine

    2010-01-01

    through several blow-downs and heat-ups and reached peak clad temperatures of more than 1000 C. In the second run, where the rod was sufficiently pre-pressurised, ballooning and burst was obtained. The first benchmark consisted of three rounds of code calculations related to IFA-650.3: 1. Pre-test calculations: Participants were provided with information regarding the setup of the Halden LOCA test facility, data from the commissioning runs, and information about the test pin and power conditions to be applied in the execution of the test. 2. Post-test calculations I: In addition to the information from the first round, participants were provided with the in-pile results from the test. 3. Post-test calculations II, unified thermal-hydraulic boundary conditions: Calculations were repeated using a cladding temperature distribution calculated with ATHLET-CD at GRS. Since the test, when executed, did not produce the expected ballooning and fuel relocation, it was decided to continue with a second benchmark using tests 650.4 and 650.5, this time as post-test calculations. The fourth test of the series, IFA-650.4 conducted in April 2006, caused particular attention in the international nuclear community. The fuel used in the experiment had a high burnup, 92 MWd/kgU, and a low pre-test hydrogen content of about 50 ppm. The cladding burst at about 790 deg. C caused a marked temperature increase at the lower end of the segment and a decrease at the upper end, indicating that fuel relocation had occurred. Subsequent gamma scanning showed that approximately 19 cm (40%) of the fuel stack were missing from the upper part of the rod. PIE at the IFE-Kjeller hot cells corroborated this evidence of substantial fuel relocation. This report presents the results of the codes which participated in the various benchmarks. The two main parts, on benchmark I and II, each start with a brief description of the most important experimental data. Then, the code calculation results follow

  4. Estimating Full IM240 Emissions from Partial Test Results: Evidence from Arizona.

    Science.gov (United States)

    Ando, Amy W; Harrington, Winston; McConnell, Virginia

    1999-10-01

    The expense and inconvenience of enhanced-vehicle-emissions testing using the full 240-second dynamometer test has led states to search for ways to shorten the test process. In fact, all states that currently use the IM240 allow some type of fast-pass, usually as early in the test as second 31, and Arizona has allowed vehicles to fast-fail after second 93. While these shorter tests save states millions of dollars in inspection lanes and driver costs, there is a loss of information since test results are no longer comparable across vehicles. This paper presents a methodology for estimating full 240-second results from partial-test results for three pollutants: HC, CO, and NO x . If states can convert all tests to consistent IM240 readings, they will be able to better characterize fleet emissions and to evaluate the impact of inspection and maintenance and other programs on emissions over time. Using a random sample of vehicles in Arizona which received full 240-second tests, we use regression analysis to estimate the relationship between emissions at second 240 and emissions at earlier seconds in the test. We examine the influence of other variables such as age, model-year group, and the pollution level itself on this relationship. We also use the estimated coefficients in several applications. First, we try to shed light on the frequent assertion that the results of the dynamometer test provide guidance for vehicle repair of failing vehicles. Using a probit analysis, we find that the probability that a failing vehicle will pass the test on the first retest is greater the longer the test has progressed. Second, we test the accuracy of our estimates for forecasting fleet emissions from partial-test emissions results in Arizona. We find forecasted fleet average emissions to be very close to the actual fleet averages for light-duty vehicles, but not quite as good for trucks, particularly when NO x emissions are forecast.

  5. Avoidance test with Eisenia fetida as indicator for the habitat function of soils. Results of a laboratory comparison test

    Energy Technology Data Exchange (ETDEWEB)

    Hund-Rinke, K. [Fraunhofer Inst. for Molecular Biology and Applied Ecology, Schmallenberg (Germany); Achazi, R.; Warnecke, D. [Free Univ. of Berlin, Inst. for Biology, Berlin (Germany); Roembke, J. [ECT Oekotoxikologie GmbH, Floersheim (Germany)

    2003-07-01

    Intention, Goal, Scope, Background. The habitat function of soils is often assessed using the reproduction test with Eisenia fetida. As this test is rather labour-intensive, an alternative is needed which is less cost-intensive in terms of duration and workload, but gives reasonable results. The avoidance test with E. fetida is a suitable screening test meeting these criteria. However, before a novel test system can be generally recommended it has to be ensured that comparable results are acquired from different laboratories on the basis of the respective test guideline. Objective. The avoidance test with E. fetida was performed as laboratory comparison test. The results were compared with those of the earthworm acute and reproduction tests carried out with the same soils. Methods. The three tests were performed by three laboratories using eight contaminated soils and three control soils. The contaminated soils were mixed with the control soils to obtain different concentrations of the contamination. (orig.)

  6. Test Beam Results of a 3D Diamond Detector

    CERN Document Server

    Dunser, Marc

    2015-01-01

    3D pixel technology has been used successfully in the past with silicon detectors for tracking applications. Recently, a first prototype of the same 3D technology has been produced on a chemical vapour deposited single-crystal diamond sensor. This device has been subsequently tested in a beam test at CERN’s SPS accelerator in a beam of 120 GeV protons. Details on the production and results of testbeam data are presented.

  7. Program collaboration and service integration activities among HIV programs in 59 U.S. health departments.

    Science.gov (United States)

    Fitz Harris, Lauren F; Toledo, Lauren; Dunbar, Erica; Aquino, Gustavo A; Nesheim, Steven R

    2014-01-01

    We identified the level and type of program collaboration and service integration (PCSI) among HIV prevention programs in 59 CDC-funded health department jurisdictions. Annual progress reports (APRs) completed by all 59 health departments funded by CDC for HIV prevention activities were reviewed for collaborative and integrated activities reported by HIV programs for calendar year 2009. We identified associations between PCSI activities and funding, AIDS diagnosis rate, and organizational integration. HIV programs collaborated with other health department programs through data-related activities, provider training, and providing funding for sexually transmitted disease (STD) activities in 24 (41%), 31 (53%), and 16 (27%) jurisdictions, respectively. Of the 59 jurisdictions, 57 (97%) reported integrated HIV and STD testing at the same venue, 39 (66%) reported integrated HIV and tuberculosis testing, and 26 (44%) reported integrated HIV and viral hepatitis testing. Forty-five (76%) jurisdictions reported providing integrated education/outreach activities for HIV and at least one other disease. Twenty-six (44%) jurisdictions reported integrated partner services among HIV and STD programs. Overall, the level of PCSI activities was not associated with HIV funding, AIDS diagnoses, or organizational integration. HIV programs in health departments collaborate primarily with STD programs. Key PCSI activities include integrated testing, integrated education/outreach, and training. Future assessments are needed to evaluate PCSI activities and to identify the level of collaboration and integration among prevention programs.

  8. Summary of results from sodium-heated steam generator test program

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, J S

    1975-07-01

    A 28 MWt sodium-heated steam generator test unit developed and fabricated by Atomics International was operated in the Sodium Component Test Installation. The SCTI is located at the Liquid Metal Engineering Center which is operated for the Atomic Energy Commission by Atomics International, Reviewed in this paper are the results of the test operations and the findings of the post-test examination of the module. Testing was performed to assure the mechanical integrity of the unit over a wide range of simulated plant operating conditions and to develop a variety of performance data. Specific tests conducted included preheat, vibration, startup-shutdown, pressurization, steady state and parametric performance mapping, endurance, simulated leak injection, low- flow stability and simulated plant transients. (author)

  9. Interpretation of Chemical Pathology Test Results in Paediatrics ...

    African Journals Online (AJOL)

    At any time we interprete paediatric chemical pathology test results we must take into consideration a number of factors, which are related with and restricted to paediatric patients. Such factors include the paediatric patient's age that may change from prematurity to above 18 years, and the paediatric patient's body weight ...

  10. Synthesis of low cycle fatigue test results

    International Nuclear Information System (INIS)

    Andrews, R.M.

    1990-01-01

    Axial strain controlled cycle fatigue tests were carried out on type 316 stainless steel parent metal, vacuum and non-vacuum electron beams welds, submerged arc welds and gas shielded metal arc welds. Testing covered total strains in the range 0.6% to 2%, and was at room temperature and 550 0 C. Parent metal and the electron beam welds showed rapid cyclic hardening, while arc welds showed little hardening. The weld metal cyclic stress-strain response was above that obtained for the parent metal, although below data obtained by other workers for similar parent materials. Weld metal endurances were above the ASME N47 continuous cycling design line at both temperatures, and comparable with parent metal data. However, the weld metal data approached the design line at low strain ranges (around 0.5%). Endurances were predicted from crack growth rates estimated from striation spacings, giving acceptable results except for the gas shielded metal arc weldments. (author)

  11. MicroCHP: Overview of selected technologies, products and field test results

    Energy Technology Data Exchange (ETDEWEB)

    Kuhn, Vollrad [Berliner Energieagentur GmbH, Franzoesische Strasse 23, 10117 Berlin (Germany); Klemes, Jiri; Bulatov, Igor [Centre for Process Integration, CEAS, The University of Manchester, P.O. Box 88, M60 1QD Manchester (United Kingdom)

    2008-11-15

    This paper gives an overview on selected microCHP technologies and products with the focus on Stirling and steam machines. Field tests in Germany, the UK and some other EC countries are presented, assessed and evaluated. Test results show the overall positive performance with differences in sectors (domestic vs. small business). Some negative experiences have been received, especially from tests with the Stirling engines and the free-piston steam machine. There are still obstacles for market implementation. Further projects and tests of microCHP are starting in various countries. When positive results will prevail and deficiencies are eliminated, a way to large-scale production and market implementation could be opened. (author)

  12. Buckling Test Results from the 8-Foot-Diameter Orthogrid-Stiffened Cylinder Test Article TA01. [Test Dates: 19-21 November 2008

    Science.gov (United States)

    Hilburger, Mark W.; Waters, W. Allen, Jr.; Haynie, Waddy T.

    2015-01-01

    Results from the testing of cylinder test article SBKF-P2-CYLTA01 (referred to herein as TA01) are presented. The testing was conducted at the Marshall Space Flight Center (MSFC), November 19?21, 2008, in support of the Shell Buckling Knockdown Factor (SBKF) Project.i The test was used to verify the performance of a newly constructed buckling test facility at MSFC and to verify the test article design and analysis approach used by the SBKF project researchers. TA01 is an 8-foot-diameter (96-inches), 78.0-inch long, aluminum-lithium (Al-Li), orthogrid-stiffened cylindrical shell similar to those used in current state-of-the-art launch vehicle structures and was designed to exhibit global buckling when subjected to compression loads. Five different load sequences were applied to TA01 during testing and included four sub-critical load sequences, i.e., loading conditions that did not cause buckling or material failure, and one final load sequence to buckling and collapse. The sub-critical load sequences consisted of either uniform axial compression loading or combined axial compression and bending and the final load sequence subjected TA01 to uniform axial compression. Traditional displacement transducers and strain gages were used to monitor the test article response at nearly 300 locations and an advanced digital image correlation system was used to obtain low-speed and high-speed full-field displacement measurements of the outer surface of the test article. Overall, the test facility and test article performed as designed. In particular, the test facility successfully applied all desired load combinations to the test article and was able to test safely into the postbuckling range of loading, and the test article failed by global buckling. In addition, the test results correlated well with initial pretest predictions.

  13. FUMEX cases 1, 2, and 3 calculated pre-test and post-test results

    Energy Technology Data Exchange (ETDEWEB)

    Stefanova, S; Vitkova, M; Passage, G; Manolova, M; Simeonova, V [Bylgarska Akademiya na Naukite, Sofia (Bulgaria). Inst. za Yadrena Izsledvaniya i Yadrena Energetika; Scheglov, A; Proselkov, V [Russian Research Centre Kurchatov Inst., Moscow (Russian Federation); Kharalampieva, Ts [Kombinat Atomna Energetika, Kozloduj (Bulgaria)

    1994-12-31

    Two versions (modified pre-test and modified post-test) of PIN-micro code were used to analyse the fuel rod behaviour of three FUMEX experiments. The experience of applying PIN-micro code with its simple structure and old conception of the steady-state operation shows significant difficulties in treating the complex processes like those in FUMEX experiments. These difficulties were partially overcame through different model modifications and corrections based on special engineering estimations and the results obtained as a whole do not seem unreasonable. The calculations have been performed by a group from two Bulgarian institutions in collaboration with specialists from the Kurchatov Research Center. 1 tab., 14 figs., 8 refs.

  14. Development of Onsite Transportation Safety Documents for Nevada Test Site

    International Nuclear Information System (INIS)

    Frank Hand; Willard Thomas; Frank Sciacca; Manny Negrete; Susan Kelley

    2008-01-01

    Department of Energy (DOE) Orders require each DOE site to develop onsite transportation safety documents (OTSDs). The Nevada Test Site approach divided all onsite transfers into two groups with each group covered by a standalone OTSD identified as Non-Nuclear and Nuclear. The Non-Nuclear transfers involve all radioactive hazardous material in less than Hazard Category (HC)-3 quantities and all chemically hazardous materials. The Nuclear transfers involve all radioactive material equal to or greater than HC-3 quantities and radioactive material mated with high explosives regardless of quantity. Both OTSDs comply with DOE O 460.1B requirements. The Nuclear OTSD also complies with DOE O 461.1A requirements and includes a DOE-STD-3009 approach to hazard analysis (HA) and accident analysis as needed. All Nuclear OTSD proposed transfers were determined to be non-equivalent and a methodology was developed to determine if 'equivalent safety' to a fully compliant Department of Transportation (DOT) transfer was achieved. For each HA scenario, three hypothetical transfers were evaluated: a DOT-compliant, uncontrolled, and controlled transfer. Equivalent safety is demonstrated when the risk level for each controlled transfer is equal to or less than the corresponding DOT-compliant transfer risk level. In this comparison the typical DOE-STD-3009 risk matrix was modified to reflect transportation requirements. Design basis conditions (DBCs) were developed for each non-equivalent transfer. Initial DBCs were based solely upon the amount of material present. Route-, transfer-, and site-specific conditions were evaluated and the initial DBCs revised as needed. Final DBCs were evaluated for each transfer's packaging and its contents

  15. IEEE standard for type test of class 1E electric cables, field splices, and connections for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1974-01-01

    The Institute of Electrical and Electronics Engineers has generated this document to provide guidance for developing a program to type test cables, field splices, and connections and obtain specific type test data. It supplements IEEE Std 323-1974 Standard for Qualifying Class IE Equipment for Nuclear Power Generating Stations, which describes basic requirements for equipment qualification. It is the integrated performance of the structures, fluid systems, the electrical systems, the instrumentation systems of the station, and in particular, the plant protection system, that limits the consequences of accidents. Seismic effects on installed cable systems are not within the scope of this document. Section 2 of this guide is an example of type tests. It is the purpose of this guide to deal with cable and connections; however, at the time of issue, detailed examples of tests for connections were not available

  16. Results of thermal test of metallic molybdenum disk target and fast-acting valve testing

    Energy Technology Data Exchange (ETDEWEB)

    Virgo, M. [Argonne National Lab. (ANL), Argonne, IL (United States); Chemerisov, S. [Argonne National Lab. (ANL), Argonne, IL (United States); Gromov, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Jonah, C. [Argonne National Lab. (ANL), Argonne, IL (United States); Vandegrift, G. F. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-12-01

    This report describes the irradiation conditions for thermal testing of helium-cooled metallic disk targets that was conducted on March 9, 2016, at the Argonne National Laboratory electron linac. The four disks in this irradiation were pressed and sintered by Oak Ridge National Laboratory from molybdenum metal powder. Two of those disks were instrumented with thermocouples. Also reported are results of testing a fast-acting-valve system, which was designed to protect the accelerator in case of a target-window failure.

  17. Large coil task and results of testing US coils

    International Nuclear Information System (INIS)

    Haubenreich, P.N.

    1986-01-01

    The United States, EURATOM, Japan, and Switzerland have collaborated since 1978 in development of superconducting toroidal field coils for fusion reactor applications. The United States provided a test facility nd three coils; the other participants, one coil each. All coils have the same interface dimensions and performance requirements (stable at 8 T), but internal design was decided by each team. Two US coil teams chose bath-cooled NbTi, 10-kA conductors. One developed a Nb 3 Sn conductor, cooled by internal flow, rated at 18 kA. All US coils have diagnostic instrumentation and imbedded heaters that enable stability tests and simulated nuclear heating experiments. In single-coil tests, each coil operated at full current in self-field (6.4 T). In six-coil tests that began in July 1986, one US coil and the Japanese coil hve been successfully operated at full current at 8 T. The other coils have operated as background coils while awaiting their turn as test coil. Coil tests have been informative and results gratifying. The facility has capably supported coil testing and its operation has provided information that will be useful in designing future fusion systems. Coil capabilities beyond nominal design points will be determined

  18. An improved method for interpreting API filter press hydraulic conductivity test results

    International Nuclear Information System (INIS)

    Heslin, G.M.; Baxter, D.Y.; Filz, G.M.; Davidson, R.R.

    1997-01-01

    The American Petroleum Institute (API) filter press is frequently used to measure the hydraulic conductivity of soil-bentonite backfill during the mix design process and as part of construction quality controls. However, interpretation of the test results is complicated by the fact that the seepage-induced consolidation pressure varies from zero at the top of the specimen to a maximum value at the bottom of the specimen. An analytical solution is available which relates the stress, compressibility, and hydraulic conductivity in soil consolidated by seepage forces. This paper presents the results of a laboratory investigation undertaken to support application of this theory to API hydraulic conductivity tests. When the API test results are interpreted using seepage consolidation theory, they are in good agreement with the results of consolidometer permeameter tests. Limitations of the API test are also discussed

  19. STD/AIDS prevention in Portuguese-speaking Africa: a review of the recent literature in the social sciences and health Prevenção das DST/AIDS nos países africanos de língua oficial portuguesa: revisão da literatura recente em ciências sociais e da saúde

    Directory of Open Access Journals (Sweden)

    Simone Monteiro

    2009-03-01

    Full Text Available The article reviews academic literature in the social sciences and health on the problems and challenges of STD/AIDS prevention in Portuguese-speaking African countries. Based on a bibliographic survey of the SciELO, PubMed, and Sociological Abstracts databases between 1997 and 2007, the research under review was organized into two groups, according to content. The first group of studies sought to understand STD/AIDS vulnerability among social groups by examining local cultural and socioeconomic factors as related to gender dynamics, sexuality, color/race, religion and health care. The second group encompassed critical assessments of shortcomings in the STD/AIDS educational messages delivered by governments and international agencies. Attention is called to the way in which the presence of traditional medicine systems and the occurrence of civil wars in the post-colonial period impact the STD/AIDS epidemic in the African countries under study.O artigo analisa a produção acadêmica, no campo das ciências sociais e da saúde, sobre os problemas e desafios das ações de prevenção das DST/AIDS nos países africanos de língua oficial portuguesa. A partir do levantamento bibliográfico nas bases SciELO, PubMed e Sociological Abstracts, entre 1997 a 2007, o conteúdo dos trabalhos selecionados foi organizado em dois eixos. O primeiro centra-se na descrição dos estudos sobre a relevância dos fatores culturais e sócio-econômicos locais, relacionados às dinâmicas de gênero, à sexualidade, cor/raça, religião e cuidados em saúde, para o entendimento da vulnerabilidade às DST/AIDS dos diversos grupos sociais. O segundo eixo aborda as avaliações críticas acerca dos equívocos das mensagens educativas sobre DST/AIDS, promovidas pelos governos e agências internacionais, bem como as implicações da presença dos sistemas de medicinas tradicionais e da ocorrência de guerras civis no período pós-colonial para a dinâmica das DST

  20. Correlation Results for a Mass Loaded Vehicle Panel Test Article Finite Element Models and Modal Survey Tests

    Science.gov (United States)

    Maasha, Rumaasha; Towner, Robert L.

    2012-01-01

    High-fidelity Finite Element Models (FEMs) were developed to support a recent test program at Marshall Space Flight Center (MSFC). The FEMs correspond to test articles used for a series of acoustic tests. Modal survey tests were used to validate the FEMs for five acoustic tests (a bare panel and four different mass-loaded panel configurations). An additional modal survey test was performed on the empty test fixture (orthogrid panel mounting fixture, between the reverb and anechoic chambers). Modal survey tests were used to test-validate the dynamic characteristics of FEMs used for acoustic test excitation. Modal survey testing and subsequent model correlation has validated the natural frequencies and mode shapes of the FEMs. The modal survey test results provide a basis for the analysis models used for acoustic loading response test and analysis comparisons