Davidson, Norman
2003-01-01
Clear and readable, this fine text assists students in achieving a grasp of the techniques and limitations of statistical mechanics. The treatment follows a logical progression from elementary to advanced theories, with careful attention to detail and mathematical development, and is sufficiently rigorous for introductory or intermediate graduate courses.Beginning with a study of the statistical mechanics of ideal gases and other systems of non-interacting particles, the text develops the theory in detail and applies it to the study of chemical equilibrium and the calculation of the thermody
Schwabl, Franz
2006-01-01
The completely revised new edition of the classical book on Statistical Mechanics covers the basic concepts of equilibrium and non-equilibrium statistical physics. In addition to a deductive approach to equilibrium statistics and thermodynamics based on a single hypothesis - the form of the microcanonical density matrix - this book treats the most important elements of non-equilibrium phenomena. Intermediate calculations are presented in complete detail. Problems at the end of each chapter help students to consolidate their understanding of the material. Beyond the fundamentals, this text demonstrates the breadth of the field and its great variety of applications. Modern areas such as renormalization group theory, percolation, stochastic equations of motion and their applications to critical dynamics, kinetic theories, as well as fundamental considerations of irreversibility, are discussed. The text will be useful for advanced students of physics and other natural sciences; a basic knowledge of quantum mechan...
Jana, Madhusudan
2015-01-01
Statistical mechanics is self sufficient, written in a lucid manner, keeping in mind the exam system of the universities. Need of study this subject and its relation to Thermodynamics is discussed in detail. Starting from Liouville theorem gradually, the Statistical Mechanics is developed thoroughly. All three types of Statistical distribution functions are derived separately with their periphery of applications and limitations. Non-interacting ideal Bose gas and Fermi gas are discussed thoroughly. Properties of Liquid He-II and the corresponding models have been depicted. White dwarfs and condensed matter physics, transport phenomenon - thermal and electrical conductivity, Hall effect, Magneto resistance, viscosity, diffusion, etc. are discussed. Basic understanding of Ising model is given to explain the phase transition. The book ends with a detailed coverage to the method of ensembles (namely Microcanonical, canonical and grand canonical) and their applications. Various numerical and conceptual problems ar...
A κ-generalized statistical mechanics approach to income analysis
International Nuclear Information System (INIS)
Clementi, F; Gallegati, M; Kaniadakis, G
2009-01-01
This paper proposes a statistical mechanics approach to the analysis of income distribution and inequality. A new distribution function, having its roots in the framework of κ-generalized statistics, is derived that is particularly suitable for describing the whole spectrum of incomes, from the low–middle income region up to the high income Pareto power-law regime. Analytical expressions for the shape, moments and some other basic statistical properties are given. Furthermore, several well-known econometric tools for measuring inequality, which all exist in a closed form, are considered. A method for parameter estimation is also discussed. The model is shown to fit remarkably well the data on personal income for the United States, and the analysis of inequality performed in terms of its parameters is revealed as very powerful
A κ-generalized statistical mechanics approach to income analysis
Clementi, F.; Gallegati, M.; Kaniadakis, G.
2009-02-01
This paper proposes a statistical mechanics approach to the analysis of income distribution and inequality. A new distribution function, having its roots in the framework of κ-generalized statistics, is derived that is particularly suitable for describing the whole spectrum of incomes, from the low-middle income region up to the high income Pareto power-law regime. Analytical expressions for the shape, moments and some other basic statistical properties are given. Furthermore, several well-known econometric tools for measuring inequality, which all exist in a closed form, are considered. A method for parameter estimation is also discussed. The model is shown to fit remarkably well the data on personal income for the United States, and the analysis of inequality performed in terms of its parameters is revealed as very powerful.
Statistical Mechanics Analysis of ATP Binding to a Multisubunit Enzyme
International Nuclear Information System (INIS)
Zhang Yun-Xin
2014-01-01
Due to inter-subunit communication, multisubunit enzymes usually hydrolyze ATP in a concerted fashion. However, so far the principle of this process remains poorly understood. In this study, from the viewpoint of statistical mechanics, a simple model is presented. In this model, we assume that the binding of ATP will change the potential of the corresponding enzyme subunit, and the degree of this change depends on the state of its adjacent subunits. The probability of enzyme in a given state satisfies the Boltzmann's distribution. Although it looks much simple, this model can fit the recent experimental data of chaperonin TRiC/CCT well. From this model, the dominant state of TRiC/CCT can be obtained. This study provide a new way to understand biophysical processe by statistical mechanics analysis. (interdisciplinary physics and related areas of science and technology)
Statistical mechanical analysis of LMFBR fuel cladding tubes
International Nuclear Information System (INIS)
Poncelet, J.-P.; Pay, A.
1977-01-01
The most important design requirement on fuel pin cladding for LMFBR's is its mechanical integrity. Disruptive factors include internal pressure from mixed oxide fuel fission gas release, thermal stresses and high temperature creep, neutron-induced differential void-swelling as a source of stress in the cladding and irradiation creep of stainless steel material, corrosion by fission products. Under irradiation these load-restraining mechanisms are accentuated by stainless steel embrittlement and strength alterations. To account for the numerous uncertainties involved in the analysis by theoretical models and computer codes statistical tools are unavoidably requested, i.e. Monte Carlo simulation methods. Thanks to these techniques, uncertainties in nominal characteristics, material properties and environmental conditions can be linked up in a correct way and used for a more accurate conceptual design. First, a thermal creep damage index is set up through a sufficiently sophisticated clad physical analysis including arbitrary time dependence of power and neutron flux as well as effects of sodium temperature, burnup and steel mechanical behavior. Although this strain limit approach implies a more general but time consuming model., on the counterpart the net output is improved and e.g. clad temperature, stress and strain maxima may be easily assessed. A full spectrum of variables are statistically treated to account for their probability distributions. Creep damage probability may be obtained and can contribute to a quantitative fuel probability estimation
Statistical mechanical analysis of LMFBR fuel cladding tubes
International Nuclear Information System (INIS)
Poncelet, J.-P.; Pay, A.
1977-01-01
The most important design requirement on fuel pin cladding for LMFBR's is its mechanical integrity. Disruptive factors include internal pressure from mixed oxide fuel fission gas release, thermal stresses and high temperature creep, neutron-induced differential void-swelling as a source of stress in the cladding and irradiation creep of stainless steel material, corrosion by fission products. Under irradiation these load-restraining mechanisms are accentuated by stainless steel embrittlement and strength alterations. To account for the numerous uncertainties involved in the analysis by theoretical models and computer codes statistical tools are unavoidably requested, i.e. Monte Carlo simulation methods. Thanks to these techniques, uncertainties in nominal characteristics, material properties and environmental conditions can be linked up in a correct way and used for a more accurate conceptual design. (Auth.)
Statistical mechanics analysis of LDPC coding in MIMO Gaussian channels
Energy Technology Data Exchange (ETDEWEB)
Alamino, Roberto C; Saad, David [Neural Computing Research Group, Aston University, Birmingham B4 7ET (United Kingdom)
2007-10-12
Using analytical methods of statistical mechanics, we analyse the typical behaviour of a multiple-input multiple-output (MIMO) Gaussian channel with binary inputs under low-density parity-check (LDPC) network coding and joint decoding. The saddle point equations for the replica symmetric solution are found in particular realizations of this channel, including a small and large number of transmitters and receivers. In particular, we examine the cases of a single transmitter, a single receiver and symmetric and asymmetric interference. Both dynamical and thermodynamical transitions from the ferromagnetic solution of perfect decoding to a non-ferromagnetic solution are identified for the cases considered, marking the practical and theoretical limits of the system under the current coding scheme. Numerical results are provided, showing the typical level of improvement/deterioration achieved with respect to the single transmitter/receiver result, for the various cases.
Statistical mechanics analysis of LDPC coding in MIMO Gaussian channels
International Nuclear Information System (INIS)
Alamino, Roberto C; Saad, David
2007-01-01
Using analytical methods of statistical mechanics, we analyse the typical behaviour of a multiple-input multiple-output (MIMO) Gaussian channel with binary inputs under low-density parity-check (LDPC) network coding and joint decoding. The saddle point equations for the replica symmetric solution are found in particular realizations of this channel, including a small and large number of transmitters and receivers. In particular, we examine the cases of a single transmitter, a single receiver and symmetric and asymmetric interference. Both dynamical and thermodynamical transitions from the ferromagnetic solution of perfect decoding to a non-ferromagnetic solution are identified for the cases considered, marking the practical and theoretical limits of the system under the current coding scheme. Numerical results are provided, showing the typical level of improvement/deterioration achieved with respect to the single transmitter/receiver result, for the various cases
Equilibrium statistical mechanics
Jackson, E Atlee
2000-01-01
Ideal as an elementary introduction to equilibrium statistical mechanics, this volume covers both classical and quantum methodology for open and closed systems. Introductory chapters familiarize readers with probability and microscopic models of systems, while additional chapters describe the general derivation of the fundamental statistical mechanics relationships. The final chapter contains 16 sections, each dealing with a different application, ordered according to complexity, from classical through degenerate quantum statistical mechanics. Key features include an elementary introduction t
Lectures on statistical mechanics
Bowler, M G
1982-01-01
Anyone dissatisfied with the almost ritual dullness of many 'standard' texts in statistical mechanics will be grateful for the lucid explanation and generally reassuring tone. Aimed at securing firm foundations for equilibrium statistical mechanics, topics of great subtlety are presented transparently and enthusiastically. Very little mathematical preparation is required beyond elementary calculus and prerequisites in physics are limited to some elementary classical thermodynamics. Suitable as a basis for a first course in statistical mechanics, the book is an ideal supplement to more convent
Equilibrium statistical mechanics
Mayer, J E
1968-01-01
The International Encyclopedia of Physical Chemistry and Chemical Physics, Volume 1: Equilibrium Statistical Mechanics covers the fundamental principles and the development of theoretical aspects of equilibrium statistical mechanics. Statistical mechanical is the study of the connection between the macroscopic behavior of bulk matter and the microscopic properties of its constituent atoms and molecules. This book contains eight chapters, and begins with a presentation of the master equation used for the calculation of the fundamental thermodynamic functions. The succeeding chapters highlight t
International Nuclear Information System (INIS)
Tonchev, N.; Shumovskij, A.S.
1986-01-01
The history of investigations, conducted at the JINR in the field of statistical mechanics, beginning with the fundamental works by Bogolyubov N.N. on superconductivity microscopic theory is presented. Ideas, introduced in these works and methods developed in them, have largely determined the ways for developing statistical mechanics in the JINR and Hartree-Fock-Bogolyubov variational principle has become an important method of the modern nucleus theory. A brief review of the main achievements, connected with the development of statistical mechanics methods and their application in different fields of physical science is given
Statistical mechanics of superconductivity
Kita, Takafumi
2015-01-01
This book provides a theoretical, step-by-step comprehensive explanation of superconductivity for undergraduate and graduate students who have completed elementary courses on thermodynamics and quantum mechanics. To this end, it adopts the unique approach of starting with the statistical mechanics of quantum ideal gases and successively adding and clarifying elements and techniques indispensible for understanding it. They include the spin-statistics theorem, second quantization, density matrices, the Bloch–De Dominicis theorem, the variational principle in statistical mechanics, attractive interaction, and bound states. Ample examples of their usage are also provided in terms of topics from advanced statistical mechanics such as two-particle correlations of quantum ideal gases, derivation of the Hartree–Fock equations, and Landau’s Fermi-liquid theory, among others. With these preliminaries, the fundamental mean-field equations of superconductivity are derived with maximum mathematical clarity based on ...
Playing at Statistical Mechanics
Clark, Paul M.; And Others
1974-01-01
Discussed are the applications of counting techniques of a sorting game to distributions and concepts in statistical mechanics. Included are the following distributions: Fermi-Dirac, Bose-Einstein, and most probable. (RH)
Statistical mechanics rigorous results
Ruelle, David
1999-01-01
This classic book marks the beginning of an era of vigorous mathematical progress in equilibrium statistical mechanics. Its treatment of the infinite system limit has not been superseded, and the discussion of thermodynamic functions and states remains basic for more recent work. The conceptual foundation provided by the Rigorous Results remains invaluable for the study of the spectacular developments of statistical mechanics in the second half of the 20th century.
Statistical mechanics of anyons
International Nuclear Information System (INIS)
Arovas, D.P.
1985-01-01
We study the statistical mechanics of a two-dimensional gas of free anyons - particles which interpolate between Bose-Einstein and Fermi-Dirac character. Thermodynamic quantities are discussed in the low-density regime. In particular, the second virial coefficient is evaluated by two different methods and is found to exhibit a simple, periodic, but nonanalytic behavior as a function of the statistics determining parameter. (orig.)
Einstein's statistical mechanics
Energy Technology Data Exchange (ETDEWEB)
Baracca, A; Rechtman S, R
1985-08-01
The foundation of equilibrium classical statistical mechanics were laid down in 1902 independently by Gibbs and Einstein. The latter's contribution, developed in three papers published between 1902 and 1904, is usually forgotten and when not, rapidly dismissed as equivalent to Gibb's. We review in detail Einstein's ideas on the foundations of statistical mechanics and show that they constitute the beginning of a research program that led Einstein to quantum theory. We also show how these ideas may be used as a starting point for an introductory course on the subject.
Einstein's statistical mechanics
International Nuclear Information System (INIS)
Baracca, A.; Rechtman S, R.
1985-01-01
The foundation of equilibrium classical statistical mechanics were laid down in 1902 independently by Gibbs and Einstein. The latter's contribution, developed in three papers published between 1902 and 1904, is usually forgotten and when not, rapidly dismissed as equivalent to Gibb's. We review in detail Einstein's ideas on the foundations of statistical mechanics and show that they constitute the beginning of a research program that led Einstein to quantum theory. We also show how these ideas may be used as a starting point for an introductory course on the subject. (author)
Statistical mechanics of solitons
International Nuclear Information System (INIS)
Bishop, A.
1980-01-01
The status of statistical mechanics theory (classical and quantum, statics and dynamics) is reviewed for 1-D soliton or solitary-wave-bearing systems. Primary attention is given to (i) perspective for existing results with evaluation and representative literature guide; (ii) motivation and status report for remaining problems; (iii) discussion of connections with other 1-D topics
Wave Mechanics or Wave Statistical Mechanics
International Nuclear Information System (INIS)
Qian Shangwu; Xu Laizi
2007-01-01
By comparison between equations of motion of geometrical optics and that of classical statistical mechanics, this paper finds that there should be an analogy between geometrical optics and classical statistical mechanics instead of geometrical mechanics and classical mechanics. Furthermore, by comparison between the classical limit of quantum mechanics and classical statistical mechanics, it finds that classical limit of quantum mechanics is classical statistical mechanics not classical mechanics, hence it demonstrates that quantum mechanics is a natural generalization of classical statistical mechanics instead of classical mechanics. Thence quantum mechanics in its true appearance is a wave statistical mechanics instead of a wave mechanics.
Statistical mechanical analysis of the linear vector channel in digital communication
International Nuclear Information System (INIS)
Takeda, Koujin; Hatabu, Atsushi; Kabashima, Yoshiyuki
2007-01-01
A statistical mechanical framework to analyze linear vector channel models in digital wireless communication is proposed for a large system. The framework is a generalization of that proposed for code-division multiple-access systems in Takeda et al (2006 Europhys. Lett. 76 1193) and enables the analysis of the system in which the elements of the channel transfer matrix are statistically correlated with each other. The significance of the proposed scheme is demonstrated by assessing the performance of an existing model of multi-input multi-output communication systems
Journey Through Statistical Mechanics
Yang, C. N.
2013-05-01
My first involvement with statistical mechanics and the many body problem was when I was a student at The National Southwest Associated University in Kunming during the war. At that time Professor Wang Zhu-Xi had just come back from Cambridge, England, where he was a student of Fowler, and his thesis was on phase transitions, a hot topic at that time, and still a very hot topic today...
Graphene Statistical Mechanics
Bowick, Mark; Kosmrlj, Andrej; Nelson, David; Sknepnek, Rastko
2015-03-01
Graphene provides an ideal system to test the statistical mechanics of thermally fluctuating elastic membranes. The high Young's modulus of graphene means that thermal fluctuations over even small length scales significantly stiffen the renormalized bending rigidity. We study the effect of thermal fluctuations on graphene ribbons of width W and length L, pinned at one end, via coarse-grained Molecular Dynamics simulations and compare with analytic predictions of the scaling of width-averaged root-mean-squared height fluctuations as a function of distance along the ribbon. Scaling collapse as a function of W and L also allows us to extract the scaling exponent eta governing the long-wavelength stiffening of the bending rigidity. A full understanding of the geometry-dependent mechanical properties of graphene, including arrays of cuts, may allow the design of a variety of modular elements with desired mechanical properties starting from pure graphene alone. Supported by NSF grant DMR-1435794
International Nuclear Information System (INIS)
Dienes, J.K.
1993-01-01
Although it is possible to simulate the ground blast from a single explosive shot with a simple computer algorithm and appropriate constants, the most commonly used modelling methods do not account for major changes in geology or shot energy because mechanical features such as tectonic stresses, fault structure, microcracking, brittle-ductile transition, and water content are not represented in significant detail. An alternative approach for modelling called Statistical Crack Mechanics is presented in this paper. This method, developed in the seventies as a part of the oil shale program, accounts for crack opening, shear, growth, and coalescence. Numerous photographs and micrographs show that shocked materials tend to involve arrays of planar cracks. The approach described here provides a way to account for microstructure and give a representation of the physical behavior of a material at the microscopic level that can account for phenomena such as permeability, fragmentation, shear banding, and hot-spot formation in explosives
Semiclassical statistical mechanics
International Nuclear Information System (INIS)
Stratt, R.M.
1979-04-01
On the basis of an approach devised by Miller, a formalism is developed which allows the nonperturbative incorporation of quantum effects into equilibrium classical statistical mechanics. The resulting expressions bear a close similarity to classical phase space integrals and, therefore, are easily molded into forms suitable for examining a wide variety of problems. As a demonstration of this, three such problems are briefly considered: the simple harmonic oscillator, the vibrational state distribution of HCl, and the density-independent radial distribution function of He 4 . A more detailed study is then made of two more general applications involving the statistical mechanics of nonanalytic potentials and of fluids. The former, which is a particularly difficult problem for perturbative schemes, is treated with only limited success by restricting phase space and by adding an effective potential. The problem of fluids, however, is readily found to yield to a semiclassical pairwise interaction approximation, which in turn permits any classical many-body model to be expressed in a convenient form. The remainder of the discussion concentrates on some ramifications of having a phase space version of quantum mechanics. To test the breadth of the formulation, the task of constructing quantal ensemble averages of phase space functions is undertaken, and in the process several limitations of the formalism are revealed. A rather different approach is also pursued. The concept of quantum mechanical ergodicity is examined through the use of numerically evaluated eigenstates of the Barbanis potential, and the existence of this quantal ergodicity - normally associated with classical phase space - is verified. 21 figures, 4 tables
Monteiro, Mayra; Oliveira, Victor; Santos, Francisco; Barros Neto, Eduardo; Silva, Karyn; Silva, Rayane; Henrique, João; Chibério, Abimaelle
2017-08-01
In order to obtain cassava starch films with improved mechanical properties in relation to the synthetic polymer in the packaging production, a complete factorial design 23 was carried out in order to investigate which factor significantly influences the tensile strength of the biofilm. The factors to be investigated were cassava starch, glycerol and modified clay contents. Modified bentonite clay was used as a filling material of the biofilm. Glycerol was the plasticizer used to thermoplastify cassava starch. The factorial analysis suggested a regression model capable of predicting the optimal mechanical property of the cassava starch film from the maximization of the tensile strength. The reliability of the regression model was tested by the correlation established with the experimental data through the following statistical analyse: Pareto graph. The modified clay was the factor of greater statistical significance on the observed response variable, being the factor that contributed most to the improvement of the mechanical property of the starch film. The factorial experiments showed that the interaction of glycerol with both modified clay and cassava starch was significant for the reduction of biofilm ductility. Modified clay and cassava starch contributed to the maximization of biofilm ductility, while glycerol contributed to the minimization.
Statistical-Mechanical Analysis of Pre-training and Fine Tuning in Deep Learning
Ohzeki, Masayuki
2015-03-01
In this paper, we present a statistical-mechanical analysis of deep learning. We elucidate some of the essential components of deep learning — pre-training by unsupervised learning and fine tuning by supervised learning. We formulate the extraction of features from the training data as a margin criterion in a high-dimensional feature-vector space. The self-organized classifier is then supplied with small amounts of labelled data, as in deep learning. Although we employ a simple single-layer perceptron model, rather than directly analyzing a multi-layer neural network, we find a nontrivial phase transition that is dependent on the number of unlabelled data in the generalization error of the resultant classifier. In this sense, we evaluate the efficacy of the unsupervised learning component of deep learning. The analysis is performed by the replica method, which is a sophisticated tool in statistical mechanics. We validate our result in the manner of deep learning, using a simple iterative algorithm to learn the weight vector on the basis of belief propagation.
Topics in statistical mechanics
International Nuclear Information System (INIS)
Elser, V.
1984-05-01
This thesis deals with four independent topics in statistical mechanics: (1) the dimer problem is solved exactly for a hexagonal lattice with general boundary using a known generating function from the theory of partitions. It is shown that the leading term in the entropy depends on the shape of the boundary; (2) continuum models of percolation and self-avoiding walks are introduced with the property that their series expansions are sums over linear graphs with intrinsic combinatorial weights and explicit dimension dependence; (3) a constrained SOS model is used to describe the edge of a simple cubic crystal. Low and high temperature results are derived as well as the detailed behavior near the crystal facet; (4) the microscopic model of the lambda-transition involving atomic permutation cycles is reexamined. In particular, a new derivation of the two-component field theory model of the critical behavior is presented. Results for a lattice model originally proposed by Kikuchi are extended with a high temperature series expansion and Monte Carlo simulation. 30 references
Statistical mechanics of nonequilibrium liquids
Evans, Denis J; Craig, D P; McWeeny, R
1990-01-01
Statistical Mechanics of Nonequilibrium Liquids deals with theoretical rheology. The book discusses nonlinear response of systems and outlines the statistical mechanical theory. In discussing the framework of nonequilibrium statistical mechanics, the book explains the derivation of a nonequilibrium analogue of the Gibbsian basis for equilibrium statistical mechanics. The book reviews the linear irreversible thermodynamics, the Liouville equation, and the Irving-Kirkwood procedure. The text then explains the Green-Kubo relations used in linear transport coefficients, the linear response theory,
Monin, A S
2007-01-01
""If ever a field needed a definitive book, it is the study of turbulence; if ever a book on turbulence could be called definitive, it is this book."" - ScienceWritten by two of Russia's most eminent and productive scientists in turbulence, oceanography, and atmospheric physics, this two-volume survey is renowned for its clarity as well as its comprehensive treatment. The first volume begins with an outline of laminar and turbulent flow. The remainder of the book treats a variety of aspects of turbulence: its statistical and Lagrangian descriptions, shear flows near surfaces and free turbulenc
Statistical mechanics and Lorentz violation
International Nuclear Information System (INIS)
Colladay, Don; McDonald, Patrick
2004-01-01
The theory of statistical mechanics is studied in the presence of Lorentz-violating background fields. The analysis is performed using the Standard-Model Extension (SME) together with a Jaynesian formulation of statistical inference. Conventional laws of thermodynamics are obtained in the presence of a perturbed hamiltonian that contains the Lorentz-violating terms. As an example, properties of the nonrelativistic ideal gas are calculated in detail. To lowest order in Lorentz violation, the scalar thermodynamic variables are only corrected by a rotationally invariant combination of parameters that mimics a (frame dependent) effective mass. Spin-couplings can induce a temperature-independent polarization in the classical gas that is not present in the conventional case. Precision measurements in the residual expectation values of the magnetic moment of Fermi gases in the limit of high temperature may provide interesting limits on these parameters
Statistical mechanics of cellular automata
International Nuclear Information System (INIS)
Wolfram, S.
1983-01-01
Cellular automata are used as simple mathematical models to investigate self-organization in statistical mechanics. A detailed analysis is given of ''elementary'' cellular automata consisting of a sequence of sites with values 0 or 1 on a line, with each site evolving deterministically in discrete time steps according to p definite rules involving the values of its nearest neighbors. With simple initial configurations, the cellular automata either tend to homogeneous states, or generate self-similar patterns with fractal dimensions approx. =1.59 or approx. =1.69. With ''random'' initial configurations, the irreversible character of the cellular automaton evolution leads to several self-organization phenomena. Statistical properties of the structures generated are found to lie in two universality classes, independent of the details of the initial state or the cellular automaton rules. More complicated cellular automata are briefly considered, and connections with dynamical systems theory and the formal theory of computation are discussed
Statistical mechanics of economics I
Energy Technology Data Exchange (ETDEWEB)
Kusmartsev, F.V., E-mail: F.Kusmartsev@lboro.ac.u [Department of Physics, Loughborough University, Leicestershire, LE11 3TU (United Kingdom)
2011-02-07
We show that statistical mechanics is useful in the description of financial crisis and economics. Taking a large amount of instant snapshots of a market over an interval of time we construct their ensembles and study their statistical interference. This results in a probability description of the market and gives capital, money, income, wealth and debt distributions, which in the most cases takes the form of the Bose-Einstein distribution. In addition, statistical mechanics provides the main market equations and laws which govern the correlations between the amount of money, debt, product, prices and number of retailers. We applied the found relations to a study of the evolution of the economics in USA between the years 1996 to 2008 and observe that over that time the income of a major population is well described by the Bose-Einstein distribution which parameters are different for each year. Each financial crisis corresponds to a peak in the absolute activity coefficient. The analysis correctly indicates the past crises and predicts the future one.
Statistical mechanics of economics I
International Nuclear Information System (INIS)
Kusmartsev, F.V.
2011-01-01
We show that statistical mechanics is useful in the description of financial crisis and economics. Taking a large amount of instant snapshots of a market over an interval of time we construct their ensembles and study their statistical interference. This results in a probability description of the market and gives capital, money, income, wealth and debt distributions, which in the most cases takes the form of the Bose-Einstein distribution. In addition, statistical mechanics provides the main market equations and laws which govern the correlations between the amount of money, debt, product, prices and number of retailers. We applied the found relations to a study of the evolution of the economics in USA between the years 1996 to 2008 and observe that over that time the income of a major population is well described by the Bose-Einstein distribution which parameters are different for each year. Each financial crisis corresponds to a peak in the absolute activity coefficient. The analysis correctly indicates the past crises and predicts the future one.
Statistical mechanics in a nutshell
Peliti, Luca
2011-01-01
Statistical mechanics is one of the most exciting areas of physics today, and it also has applications to subjects as diverse as economics, social behavior, algorithmic theory, and evolutionary biology. Statistical Mechanics in a Nutshell offers the most concise, self-contained introduction to this rapidly developing field. Requiring only a background in elementary calculus and elementary mechanics, this book starts with the basics, introduces the most important developments in classical statistical mechanics over the last thirty years, and guides readers to the very threshold of today
Predictive statistical mechanics
International Nuclear Information System (INIS)
Jaynes, E.T.
1986-01-01
This paper tries to explain the original motivation in quantum theory, the formalism that evolved from it, and some recent applications. The difficulty in finding a rational interpretation of quantum theory is examined. The paper presents and tries to solve the technical problem of how to use probability theory to help one do plausible reasoning in situations where, because of incomplete information, one cannot use deductive reasoning. Bayesian inference and the mass of Saturn are discussed and a generalized inverse problem is presented. The author examines the maximum entropy principle. Applications are discussed and include: spectrum analysis, image reconstruction, noisy data, and medical tomography
Takabe, Satoshi; Hukushima, Koji
2016-05-01
Typical behavior of the linear programming (LP) problem is studied as a relaxation of the minimum vertex cover (min-VC), a type of integer programming (IP) problem. A lattice-gas model on the Erdös-Rényi random graphs of α-uniform hyperedges is proposed to express both the LP and IP problems of the min-VC in the common statistical mechanical model with a one-parameter family. Statistical mechanical analyses reveal for α=2 that the LP optimal solution is typically equal to that given by the IP below the critical average degree c=e in the thermodynamic limit. The critical threshold for good accuracy of the relaxation extends the mathematical result c=1 and coincides with the replica symmetry-breaking threshold of the IP. The LP relaxation for the minimum hitting sets with α≥3, minimum vertex covers on α-uniform random graphs, is also studied. Analytic and numerical results strongly suggest that the LP relaxation fails to estimate optimal values above the critical average degree c=e/(α-1) where the replica symmetry is broken.
Takabe, Satoshi; Hukushima, Koji
2016-05-01
Typical behavior of the linear programming (LP) problem is studied as a relaxation of the minimum vertex cover (min-VC), a type of integer programming (IP) problem. A lattice-gas model on the Erdös-Rényi random graphs of α -uniform hyperedges is proposed to express both the LP and IP problems of the min-VC in the common statistical mechanical model with a one-parameter family. Statistical mechanical analyses reveal for α =2 that the LP optimal solution is typically equal to that given by the IP below the critical average degree c =e in the thermodynamic limit. The critical threshold for good accuracy of the relaxation extends the mathematical result c =1 and coincides with the replica symmetry-breaking threshold of the IP. The LP relaxation for the minimum hitting sets with α ≥3 , minimum vertex covers on α -uniform random graphs, is also studied. Analytic and numerical results strongly suggest that the LP relaxation fails to estimate optimal values above the critical average degree c =e /(α -1 ) where the replica symmetry is broken.
Introduction to quantum statistical mechanics
International Nuclear Information System (INIS)
Bogolyubov, N.N.; Bogolyubov, N.N.
1980-01-01
In a set of lectures, which has been delivered at the Physical Department of Moscow State University as a special course for students represented are some basic ideas of quantum statistical mechanics. Considered are in particular, the Liouville equations in classical and quantum mechanics, canonical distribution and thermodynamical functions, two-time correlation functions and Green's functions in the theory of thermal equilibrium
QUANTUM MECHANICS WITHOUT STATISTICAL POSTULATES
International Nuclear Information System (INIS)
Geiger, G.
2000-01-01
The Bohmian formulation of quantum mechanics describes the measurement process in an intuitive way without a reduction postulate. Due to the chaotic motion of the hidden classical particle all statistical features of quantum mechanics during a sequence of repeated measurements can be derived in the framework of a deterministic single system theory
Statistical-mechanics analysis of Gaussian labeled-unlabeled classification problems
International Nuclear Information System (INIS)
Tanaka, Toshiyuki
2013-01-01
The labeled-unlabeled classification problem in semi-supervised learning is studied via statistical-mechanics approach. We analytically investigate performance of a learner with an equal-weight mixture of two symmetrically-located Gaussians, performing posterior mean estimation of the parameter vector on the basis of a dataset consisting of labeled and unlabeled data generated from the same probability model as that assumed by the learner. Under the assumption of replica symmetry, we have analytically obtained a set of saddle-point equations, which allows us to numerically evaluate performance of the learner. On the basis of the analytical result we have observed interesting phenomena, in particular the coexistence of good and bad solutions, which may happen when the number of unlabeled data is relatively large compared with that of labeled data
Moral foundations in an interacting neural networks society: A statistical mechanics analysis
Vicente, R.; Susemihl, A.; Jericó, J. P.; Caticha, N.
2014-04-01
The moral foundations theory supports that people, across cultures, tend to consider a small number of dimensions when classifying issues on a moral basis. The data also show that the statistics of weights attributed to each moral dimension is related to self-declared political affiliation, which in turn has been connected to cognitive learning styles by the recent literature in neuroscience and psychology. Inspired by these data, we propose a simple statistical mechanics model with interacting neural networks classifying vectors and learning from members of their social neighbourhood about their average opinion on a large set of issues. The purpose of learning is to reduce dissension among agents when disagreeing. We consider a family of learning algorithms parametrized by δ, that represents the importance given to corroborating (same sign) opinions. We define an order parameter that quantifies the diversity of opinions in a group with homogeneous learning style. Using Monte Carlo simulations and a mean field approximation we find the relation between the order parameter and the learning parameter δ at a temperature we associate with the importance of social influence in a given group. In concordance with data, groups that rely more strongly on corroborating evidence sustain less opinion diversity. We discuss predictions of the model and propose possible experimental tests.
Renyi statistics in equilibrium statistical mechanics
International Nuclear Information System (INIS)
Parvan, A.S.; Biro, T.S.
2010-01-01
The Renyi statistics in the canonical and microcanonical ensembles is examined both in general and in particular for the ideal gas. In the microcanonical ensemble the Renyi statistics is equivalent to the Boltzmann-Gibbs statistics. By the exact analytical results for the ideal gas, it is shown that in the canonical ensemble, taking the thermodynamic limit, the Renyi statistics is also equivalent to the Boltzmann-Gibbs statistics. Furthermore it satisfies the requirements of the equilibrium thermodynamics, i.e. the thermodynamical potential of the statistical ensemble is a homogeneous function of first degree of its extensive variables of state. We conclude that the Renyi statistics arrives at the same thermodynamical relations, as those stemming from the Boltzmann-Gibbs statistics in this limit.
Modular reweighting software for statistical mechanical analysis of biased equilibrium data
Sindhikara, Daniel J.
2012-07-01
Here a simple, useful, modular approach and software suite designed for statistical reweighting and analysis of equilibrium ensembles is presented. Statistical reweighting is useful and sometimes necessary for analysis of equilibrium enhanced sampling methods, such as umbrella sampling or replica exchange, and also in experimental cases where biasing factors are explicitly known. Essentially, statistical reweighting allows extrapolation of data from one or more equilibrium ensembles to another. Here, the fundamental separable steps of statistical reweighting are broken up into modules - allowing for application to the general case and avoiding the black-box nature of some “all-inclusive” reweighting programs. Additionally, the programs included are, by-design, written with little dependencies. The compilers required are either pre-installed on most systems, or freely available for download with minimal trouble. Examples of the use of this suite applied to umbrella sampling and replica exchange molecular dynamics simulations will be shown along with advice on how to apply it in the general case. New version program summaryProgram title: Modular reweighting version 2 Catalogue identifier: AEJH_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEJH_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 179 118 No. of bytes in distributed program, including test data, etc.: 8 518 178 Distribution format: tar.gz Programming language: C++, Python 2.6+, Perl 5+ Computer: Any Operating system: Any RAM: 50-500 MB Supplementary material: An updated version of the original manuscript (Comput. Phys. Commun. 182 (2011) 2227) is available Classification: 4.13 Catalogue identifier of previous version: AEJH_v1_0 Journal reference of previous version: Comput. Phys. Commun. 182 (2011) 2227 Does the new
Quantum mechanics from classical statistics
International Nuclear Information System (INIS)
Wetterich, C.
2010-01-01
Quantum mechanics can emerge from classical statistics. A typical quantum system describes an isolated subsystem of a classical statistical ensemble with infinitely many classical states. The state of this subsystem can be characterized by only a few probabilistic observables. Their expectation values define a density matrix if they obey a 'purity constraint'. Then all the usual laws of quantum mechanics follow, including Heisenberg's uncertainty relation, entanglement and a violation of Bell's inequalities. No concepts beyond classical statistics are needed for quantum physics - the differences are only apparent and result from the particularities of those classical statistical systems which admit a quantum mechanical description. Born's rule for quantum mechanical probabilities follows from the probability concept for a classical statistical ensemble. In particular, we show how the non-commuting properties of quantum operators are associated to the use of conditional probabilities within the classical system, and how a unitary time evolution reflects the isolation of the subsystem. As an illustration, we discuss a classical statistical implementation of a quantum computer.
Modern Thermodynamics with Statistical Mechanics
Helrich, Carl S
2009-01-01
With the aim of presenting thermodynamics in as simple and as unified a form as possible, this textbook starts with an introduction to the first and second laws and then promptly addresses the complete set of the potentials in a subsequent chapter and as a central theme throughout. Before discussing modern laboratory measurements, the book shows that the fundamental quantities sought in the laboratory are those which are required for determining the potentials. Since the subjects of thermodynamics and statistical mechanics are a seamless whole, statistical mechanics is treated as integral part of the text. Other key topics such as irreversibility, the ideas of Ilya Prigogine, chemical reaction rates, equilibrium of heterogeneous systems, and transition-state theory serve to round out this modern treatment. An additional chapter covers quantum statistical mechanics due to active current research in Bose-Einstein condensation. End-of-chapter exercises, chapter summaries, and an appendix reviewing fundamental pr...
Statistical ensembles in quantum mechanics
International Nuclear Information System (INIS)
Blokhintsev, D.
1976-01-01
The interpretation of quantum mechanics presented in this paper is based on the concept of quantum ensembles. This concept differs essentially from the canonical one by that the interference of the observer into the state of a microscopic system is of no greater importance than in any other field of physics. Owing to this fact, the laws established by quantum mechanics are not of less objective character than the laws governing classical statistical mechanics. The paradoxical nature of some statements of quantum mechanics which result from the interpretation of the wave functions as the observer's notebook greatly stimulated the development of the idea presented. (Auth.)
Mascha, Edward J; Dalton, Jarrod E; Kurz, Andrea; Saager, Leif
2013-10-01
In comparative clinical studies, a common goal is to assess whether an exposure, or intervention, affects the outcome of interest. However, just as important is to understand the mechanism(s) for how the intervention affects outcome. For example, if preoperative anemia was shown to increase the risk of postoperative complications by 15%, it would be important to quantify how much of that effect was due to patients receiving intraoperative transfusions. Mediation analysis attempts to quantify how much, if any, of the effect of an intervention on outcome goes though prespecified mediator, or "mechanism" variable(s), that is, variables sitting on the causal pathway between exposure and outcome. Effects of an exposure on outcome can thus be divided into direct and indirect, or mediated, effects. Mediation is claimed when 2 conditions are true: the exposure affects the mediator and the mediator (adjusting for the exposure) affects the outcome. Understanding how an intervention affects outcome can validate or invalidate one's original hypothesis and also facilitate further research to modify the responsible factors, and thus improve patient outcome. We discuss the proper design and analysis of studies investigating mediation, including the importance of distinguishing mediator variables from confounding variables, the challenge of identifying potential mediators when the exposure is chronic versus acute, and the requirements for claiming mediation. Simple designs are considered, as well as those containing multiple mediators, multiple outcomes, and mixed data types. Methods are illustrated with data collected by the National Surgical Quality Improvement Project (NSQIP) and utilized in a companion paper which assessed the effects of preoperative anemic status on postoperative outcomes.
Statistical data analysis handbook
National Research Council Canada - National Science Library
Wall, Francis J
1986-01-01
It must be emphasized that this is not a text book on statistics. Instead it is a working tool that presents data analysis in clear, concise terms which can be readily understood even by those without formal training in statistics...
Statistical mechanics of multipartite entanglement
Facchi, P.; Florio, G.; Marzolino, U.; Parisi, G.; Pascazio, S.
2009-02-01
We characterize the multipartite entanglement of a system of n qubits in terms of the distribution function of the bipartite purity over all balanced bipartitions. We search for those (maximally multipartite entangled) states whose purity is minimum for all bipartitions and recast this optimization problem into a problem of statistical mechanics.
Statistical mechanics of multipartite entanglement
Energy Technology Data Exchange (ETDEWEB)
Facchi, P [Dipartimento di Matematica, Universita di Bari, I-70125 Bari (Italy); Florio, G; Pascazio, S [Istituto Nazionale di Fisica Nucleare, Sezione di Bari, I-70126 Bari (Italy); Marzolino, U [Dipartimento di Fisica Teorica, Universita di Trieste, Strada Costiera 11, 34014 Trieste (Italy); Parisi, G [Dipartimento di Fisica, Universita di Roma ' La Sapienza' , Piazzale Aldo Moro 2, 00185 Roma, Italy, Centre for Statistical Mechanics and Complexity (SMC), CNR-INFM, 00185 Roma (Italy)
2009-02-06
We characterize the multipartite entanglement of a system of n qubits in terms of the distribution function of the bipartite purity over all balanced bipartitions. We search for those (maximally multipartite entangled) states whose purity is minimum for all bipartitions and recast this optimization problem into a problem of statistical mechanics.
Statistical mechanics of multipartite entanglement
International Nuclear Information System (INIS)
Facchi, P; Florio, G; Pascazio, S; Marzolino, U; Parisi, G
2009-01-01
We characterize the multipartite entanglement of a system of n qubits in terms of the distribution function of the bipartite purity over all balanced bipartitions. We search for those (maximally multipartite entangled) states whose purity is minimum for all bipartitions and recast this optimization problem into a problem of statistical mechanics
Natural time analysis and Tsallis non-additive entropy statistical mechanics.
Sarlis, N. V.; Skordas, E. S.; Varotsos, P.
2016-12-01
Upon analyzing the seismic data in natural time and employing a sliding natural time window comprising a number of events that would occur in a few months, it has been recently uncovered[1] that a precursory Seismic Electric Signals activity[2] initiates almost simultaneously with the appearance of a minimum in the fluctuations of the order parameter of seismicity [3]. Such minima have been ascertained [4] during periods of the magnitude time series exhibiting long range correlations [5] a few months before all earthquakes of magnitude 7.6 or larger that occurred in the entire Japanese area from 1 January 1984 to 11 March 2011 (the day of the M9 Tohoku-Oki earthquake). Before and after these minima, characteristic changes of the temporal correlations between earthquake magnitudes are observed which cannot be captured by Tsallis non-additive entropy statistical mechanics in the frame of which it has been suggested that kappa distributions arise [6]. Here, we extend the study concerning the existence of such minima in a large area that includes Aegean Sea and its surrounding area which exhibits in general seismo-tectonics [7] different than that of the entire Japanese area. References P. A. Varotsos et al., Tectonophysics, 589 (2013) 116. P. Varotsos and M. Lazaridou, Tectonophysics 188 (1991) 321. P.A. Varotsos et al., Phys Rev E 72 (2005) 041103. N. V. Sarlis et al., Proc Natl Acad Sci USA 110 (2013) 13734. P. A. Varotsos, N. V. Sarlis, and E. S. Skordas, J Geophys Res Space Physics 119 (2014), 9192, doi: 10.1002/2014JA0205800. G. Livadiotis, and D. J. McComas, J Geophys Res 114 (2009) A11105, doi:10.1029/2009JA014352. S. Uyeda et al., Tectonophysics, 304 (1999) 41.
Liu, Zhichao; Zhao, Yunjie; Zeng, Chen; Computational Biophysics Lab Team
As the main protein of the bacterial flagella, flagellin plays an important role in perception and defense response. The newly discovered locus, FLS2, is ubiquitously expressed. FLS2 encodes a putative receptor kinase and shares many homologies with some plant resistance genes and even with some components of immune system of mammals and insects. In Arabidopsis, FLS2 perception is achieved by the recognition of epitope flg22, which induces FLS2 heteromerization with BAK1 and finally the plant immunity. Here we use both analytical methods such as Direct Coupling Analysis (DCA) and Molecular Dynamics (MD) Simulations to get a better understanding of the defense mechanism of FLS2. This may facilitate a redesign of flg22 or de-novo design for desired specificity and potency to extend the immune properties of FLS2 to other important crops and vegetables.
Statistical Mechanics of Prion Diseases
International Nuclear Information System (INIS)
Slepoy, A.; Singh, R. R. P.; Pazmandi, F.; Kulkarni, R. V.; Cox, D. L.
2001-01-01
We present a two-dimensional, lattice based, protein-level statistical mechanical model for prion diseases (e.g., mad cow disease) with concomitant prion protein misfolding and aggregation. Our studies lead us to the hypothesis that the observed broad incubation time distribution in epidemiological data reflect fluctuation dominated growth seeded by a few nanometer scale aggregates, while much narrower incubation time distributions for innoculated lab animals arise from statistical self-averaging. We model ''species barriers'' to prion infection and assess a related treatment protocol
Statistical mechanics of black holes
International Nuclear Information System (INIS)
Harms, B.; Leblanc, Y.
1992-01-01
We analyze the statistical mechanics of a gas of neutral and charged black holes. The microcanonical ensemble is the only possible approach to this system, and the equilibrium configuration is the one for which most of the energy is carried by a single black hole. Schwarzschild black holes are found to obey the statistical bootstrap condition. In all cases, the microcanonical temperature is identical to the Hawking temperature of the most massive black hole in the gas. U(1) charges in general break the bootstrap property. The problems of black-hole decay and of quantum coherence are also addressed
Nonequilibrium statistical mechanics ensemble method
Eu, Byung Chan
1998-01-01
In this monograph, nonequilibrium statistical mechanics is developed by means of ensemble methods on the basis of the Boltzmann equation, the generic Boltzmann equations for classical and quantum dilute gases, and a generalised Boltzmann equation for dense simple fluids The theories are developed in forms parallel with the equilibrium Gibbs ensemble theory in a way fully consistent with the laws of thermodynamics The generalised hydrodynamics equations are the integral part of the theory and describe the evolution of macroscopic processes in accordance with the laws of thermodynamics of systems far removed from equilibrium Audience This book will be of interest to researchers in the fields of statistical mechanics, condensed matter physics, gas dynamics, fluid dynamics, rheology, irreversible thermodynamics and nonequilibrium phenomena
Statistical mechanics of complex networks
Rubi, Miguel; Diaz-Guilera, Albert
2003-01-01
Networks can provide a useful model and graphic image useful for the description of a wide variety of web-like structures in the physical and man-made realms, e.g. protein networks, food webs and the Internet. The contributions gathered in the present volume provide both an introduction to, and an overview of, the multifaceted phenomenology of complex networks. Statistical Mechanics of Complex Networks also provides a state-of-the-art picture of current theoretical methods and approaches.
Statistical mechanics and field theory
International Nuclear Information System (INIS)
Samuel, S.A.
1979-05-01
Field theory methods are applied to statistical mechanics. Statistical systems are related to fermionic-like field theories through a path integral representation. Considered are the Ising model, the free-fermion model, and close-packed dimer problems on various lattices. Graphical calculational techniques are developed. They are powerful and yield a simple procedure to compute the vacuum expectation value of an arbitrary product of Ising spin variables. From a field theorist's point of view, this is the simplest most logical derivation of the Ising model partition function and correlation functions. This work promises to open a new area of physics research when the methods are used to approximate unsolved problems. By the above methods a new model named the 128 pseudo-free vertex model is solved. Statistical mechanics intuition is applied to field theories. It is shown that certain relativistic field theories are equivalent to classical interacting gases. Using this analogy many results are obtained, particularly for the Sine-Gordon field theory. Quark confinement is considered. Although not a proof of confinement, a logical, esthetic, and simple picture is presented of how confinement works. A key ingredient is the insight gained by using an analog statistical system consisting of a gas of macromolecules. This analogy allows the computation of Wilson loops in the presence of topological vortices and when symmetry breakdown occurs in the topological quantum number. Topological symmetry breakdown calculations are placed on approximately the same level of rigor as instanton calculations. The picture of confinement that emerges is similar to the dual Meissner type advocated by Mandelstam. Before topological symmetry breakdown, QCD has monopoles bound linearly together by three topological strings. Topological symmetry breakdown corresponds to a new phase where these monopoles are liberated. It is these liberated monopoles that confine quarks. 64 references
Introduction to quantum statistical mechanics
Bogolyubov, N N
2010-01-01
Introduction to Quantum Statistical Mechanics (Second Edition) may be used as an advanced textbook by graduate students, even ambitious undergraduates in physics. It is also suitable for non experts in physics who wish to have an overview of some of the classic and fundamental quantum models in the subject. The explanation in the book is detailed enough to capture the interest of the reader, and complete enough to provide the necessary background material needed to dwell further into the subject and explore the research literature.
Barra, Adriano; Contucci, Pierluigi; Sandell, Rickard; Vernia, Cecilia
2014-02-01
How does immigrant integration in a country change with immigration density? Guided by a statistical mechanics perspective we propose a novel approach to this problem. The analysis focuses on classical integration quantifiers such as the percentage of jobs (temporary and permanent) given to immigrants, mixed marriages, and newborns with parents of mixed origin. We find that the average values of different quantifiers may exhibit either linear or non-linear growth on immigrant density and we suggest that social action, a concept identified by Max Weber, causes the observed non-linearity. Using the statistical mechanics notion of interaction to quantitatively emulate social action, a unified mathematical model for integration is proposed and it is shown to explain both growth behaviors observed. The linear theory instead, ignoring the possibility of interaction effects would underestimate the quantifiers up to 30% when immigrant densities are low, and overestimate them as much when densities are high. The capacity to quantitatively isolate different types of integration mechanisms makes our framework a suitable tool in the quest for more efficient integration policies.
Annotations to quantum statistical mechanics
Kim, In-Gee
2018-01-01
This book is a rewritten and annotated version of Leo P. Kadanoff and Gordon Bayms lectures that were presented in the book Quantum Statistical Mechanics: Greens Function Methods in Equilibrium and Nonequilibrium Problems. The lectures were devoted to a discussion on the use of thermodynamic Greens functions in describing the properties of many-particle systems. The functions provided a method for discussing finite-temperature problems with no more conceptual difficulty than ground-state problems, and the method was equally applicable to boson and fermion systems and equilibrium and nonequilibrium problems. The lectures also explained nonequilibrium statistical physics in a systematic way and contained essential concepts on statistical physics in terms of Greens functions with sufficient and rigorous details. In-Gee Kim thoroughly studied the lectures during one of his research projects but found that the unspecialized method used to present them in the form of a book reduced their readability. He st...
Statistical mechanics of violent relaxation
International Nuclear Information System (INIS)
Shu, F.H.
1978-01-01
We reexamine the foundations of Lynden-Bell's statistical mechanical discussion of violent relaxation in collisionless stellar systems. We argue that Lynden-Bell's formulation in terms of a continuum description introduces unnecessary complications, and we consider a more conventional formulation in terms of particles. We then find the exclusion principle discovered by Lynden-Bell to be quantitatively important only at phase densities where two-body encounters are no longer negligible. Since the edynamical basis for the exclusion principle vanishes in such cases anyway, Lynden-Bell statistics always reduces in practice to Maxwell-Boltzmann statistics when applied to stellar systems. Lynden-Bell also found the equilibrium distribution function generally to be a sum of Maxwellians with velocity dispersions dependent on the phase density at star formation. We show that this difficulty vanishes in the particulate description for an encounterless stellar system as long as stars of different masses are initially well mixed in phase space. Our methods also demonstrate the equivalence between Gibbs's formalism which uses the microcanonical ensemble and Boltzmann's formalism which uses a coarse-grained continuum description. In addition, we clarify the concept of irreversible behavior on a macroscopic scale for an encounterless stellar system. Finally, we comment on the use of unusual macroscopic constraints to simulate the effects of incomplete relaxation
Stability and equilibrium in quantum statistical mechanics
International Nuclear Information System (INIS)
Kastler, Daniel.
1975-01-01
A derivation of the Gibbs Ansatz, base of the equilibrium statistical mechanics is provided from a stability requirements, in technical connection with the harmonic analysis of non-commutative dynamical systems. By the same token a relation is established between stability and the positivity of Hamiltonian in the zero temperature case [fr
Improta, Roberto; Vitagliano, Luigi; Esposito, Luciana
2015-11-01
The elucidation of the mutual influence between peptide bond geometry and local conformation has important implications for protein structure refinement, validation, and prediction. To gain insights into the structural determinants and the energetic contributions associated with protein/peptide backbone plasticity, we here report an extensive analysis of the variability of the peptide bond angles by combining statistical analyses of protein structures and quantum mechanics calculations on small model peptide systems. Our analyses demonstrate that all the backbone bond angles strongly depend on the peptide conformation and unveil the existence of regular trends as function of ψ and/or φ. The excellent agreement of the quantum mechanics calculations with the statistical surveys of protein structures validates the computational scheme here employed and demonstrates that the valence geometry of protein/peptide backbone is primarily dictated by local interactions. Notably, for the first time we show that the position of the H(α) hydrogen atom, which is an important parameter in NMR structural studies, is also dependent on the local conformation. Most of the trends observed may be satisfactorily explained by invoking steric repulsive interactions; in some specific cases the valence bond variability is also influenced by hydrogen-bond like interactions. Moreover, we can provide a reliable estimate of the energies involved in the interplay between geometry and conformations. © 2015 Wiley Periodicals, Inc.
Statistical mechanics of program systems
International Nuclear Information System (INIS)
Neirotti, Juan P; Caticha, Nestor
2006-01-01
We discuss the collective behaviour of a set of operators and variables that constitute a program and the emergence of meaningful computational properties in the language of statistical mechanics. This is done by appropriately modifying available Monte Carlo methods to deal with hierarchical structures. The study suggests, in analogy with simulated annealing, a method to automatically design programs. Reasonable solutions can be found, at low temperatures, when the method is applied to simple toy problems such as finding an algorithm that determines the roots of a function or one that makes a nonlinear regression. Peaks in the specific heat are interpreted as signalling phase transitions which separate regions where different algorithmic strategies are used to solve the problem
Statistical Mechanics of Turbulent Flows
International Nuclear Information System (INIS)
Cambon, C
2004-01-01
This is a handbook for a computational approach to reacting flows, including background material on statistical mechanics. In this sense, the title is somewhat misleading with respect to other books dedicated to the statistical theory of turbulence (e.g. Monin and Yaglom). In the present book, emphasis is placed on modelling (engineering closures) for computational fluid dynamics. The probabilistic (pdf) approach is applied to the local scalar field, motivated first by the nonlinearity of chemical source terms which appear in the transport equations of reacting species. The probabilistic and stochastic approaches are also used for the velocity field and particle position; nevertheless they are essentially limited to Lagrangian models for a local vector, with only single-point statistics, as for the scalar. Accordingly, conventional techniques, such as single-point closures for RANS (Reynolds-averaged Navier-Stokes) and subgrid-scale models for LES (large-eddy simulations), are described and in some cases reformulated using underlying Langevin models and filtered pdfs. Even if the theoretical approach to turbulence is not discussed in general, the essentials of probabilistic and stochastic-processes methods are described, with a useful reminder concerning statistics at the molecular level. The book comprises 7 chapters. Chapter 1 briefly states the goals and contents, with a very clear synoptic scheme on page 2. Chapter 2 presents definitions and examples of pdfs and related statistical moments. Chapter 3 deals with stochastic processes, pdf transport equations, from Kramer-Moyal to Fokker-Planck (for Markov processes), and moments equations. Stochastic differential equations are introduced and their relationship to pdfs described. This chapter ends with a discussion of stochastic modelling. The equations of fluid mechanics and thermodynamics are addressed in chapter 4. Classical conservation equations (mass, velocity, internal energy) are derived from their
Statistical Mechanics of Turbulent Dynamos
Shebalin, John V.
2014-01-01
Incompressible magnetohydrodynamic (MHD) turbulence and magnetic dynamos, which occur in magnetofluids with large fluid and magnetic Reynolds numbers, will be discussed. When Reynolds numbers are large and energy decays slowly, the distribution of energy with respect to length scale becomes quasi-stationary and MHD turbulence can be described statistically. In the limit of infinite Reynolds numbers, viscosity and resistivity become zero and if these values are used in the MHD equations ab initio, a model system called ideal MHD turbulence results. This model system is typically confined in simple geometries with some form of homogeneous boundary conditions, allowing for velocity and magnetic field to be represented by orthogonal function expansions. One advantage to this is that the coefficients of the expansions form a set of nonlinearly interacting variables whose behavior can be described by equilibrium statistical mechanics, i.e., by a canonical ensemble theory based on the global invariants (energy, cross helicity and magnetic helicity) of ideal MHD turbulence. Another advantage is that truncated expansions provide a finite dynamical system whose time evolution can be numerically simulated to test the predictions of the associated statistical mechanics. If ensemble predictions are the same as time averages, then the system is said to be ergodic; if not, the system is nonergodic. Although it had been implicitly assumed in the early days of ideal MHD statistical theory development that these finite dynamical systems were ergodic, numerical simulations provided sufficient evidence that they were, in fact, nonergodic. Specifically, while canonical ensemble theory predicted that expansion coefficients would be (i) zero-mean random variables with (ii) energy that decreased with length scale, it was found that although (ii) was correct, (i) was not and the expected ergodicity was broken. The exact cause of this broken ergodicity was explained, after much
Directory of Open Access Journals (Sweden)
M Ann Mongan
Full Text Available Genome-wide gene expression profiling has become standard for assessing potential liabilities as well as for elucidating mechanisms of toxicity of drug candidates under development. Analysis of microarray data is often challenging due to the lack of a statistical model that is amenable to biological variation in a small number of samples. Here we present a novel non-parametric algorithm that requires minimal assumptions about the data distribution. Our method for determining differential expression consists of two steps: 1 We apply a nominal threshold on fold change and platform p-value to designate whether a gene is differentially expressed in each treated and control sample relative to the averaged control pool, and 2 We compared the number of samples satisfying criteria in step 1 between the treated and control groups to estimate the statistical significance based on a null distribution established by sample permutations. The method captures group effect without being too sensitive to anomalies as it allows tolerance for potential non-responders in the treatment group and outliers in the control group. Performance and results of this method were compared with the Significant Analysis of Microarrays (SAM method. These two methods were applied to investigate hepatic transcriptional responses of wild-type (PXR(+/+ and pregnane X receptor-knockout (PXR(-/- mice after 96 h exposure to CMP013, an inhibitor of β-secretase (β-site of amyloid precursor protein cleaving enzyme 1 or BACE1. Our results showed that CMP013 led to transcriptional changes in hallmark PXR-regulated genes and induced a cascade of gene expression changes that explained the hepatomegaly observed only in PXR(+/+ animals. Comparison of concordant expression changes between PXR(+/+ and PXR(-/- mice also suggested a PXR-independent association between CMP013 and perturbations to cellular stress, lipid metabolism, and biliary transport.
Applying Statistical Mechanics to pixel detectors
International Nuclear Information System (INIS)
Pindo, Massimiliano
2002-01-01
Pixel detectors, being made of a large number of active cells of the same kind, can be considered as significant sets to which Statistical Mechanics variables and methods can be applied. By properly redefining well known statistical parameters in order to let them match the ones that actually characterize pixel detectors, an analysis of the way they work can be performed in a totally new perspective. A deeper understanding of pixel detectors is attained, helping in the evaluation and comparison of their intrinsic characteristics and performance
Beginning statistics with data analysis
Mosteller, Frederick; Rourke, Robert EK
2013-01-01
This introduction to the world of statistics covers exploratory data analysis, methods for collecting data, formal statistical inference, and techniques of regression and analysis of variance. 1983 edition.
Metastability in Field Theory and Statistical Mechanics
International Nuclear Information System (INIS)
Carvalho, C.A. de.
1984-01-01
After a phase transition analysis which can occur in the framework of a scalar field theory, at finite temperature and in presence of a external field, possibles metastable situations are studied and also how is their relationship with the transitions. In both cases it is used a semiclassical approximation to the theory which, in Statistical Mechanics, corresponds to the droplet-bubble model. (L.C.) [pt
Applied multivariate statistical analysis
Härdle, Wolfgang Karl
2015-01-01
Focusing on high-dimensional applications, this 4th edition presents the tools and concepts used in multivariate data analysis in a style that is also accessible for non-mathematicians and practitioners. It surveys the basic principles and emphasizes both exploratory and inferential statistics; a new chapter on Variable Selection (Lasso, SCAD and Elastic Net) has also been added. All chapters include practical exercises that highlight applications in different multivariate data analysis fields: in quantitative financial studies, where the joint dynamics of assets are observed; in medicine, where recorded observations of subjects in different locations form the basis for reliable diagnoses and medication; and in quantitative marketing, where consumers’ preferences are collected in order to construct models of consumer behavior. All of these examples involve high to ultra-high dimensions and represent a number of major fields in big data analysis. The fourth edition of this book on Applied Multivariate ...
Farrell, Brian F.; Ioannou, Petros J.
2017-08-01
This paper describes a study of the self-sustaining process in wall turbulence. The study is based on a second order statistical state dynamics model of Couette flow in which the state variables are the streamwise mean flow (first cumulant) and perturbation covariance (second cumulant). This statistical state dynamics model is closed by either setting the third cumulant to zero or by replacing it with a stochastic parametrization. Statistical state dynamics models with this form are referred to as S3T models. S3T models have been shown to self-sustain turbulence with a mean flow and second order perturbation structure similar to that obtained by direct numerical simulation of the equations of motion. The use of a statistical state dynamics model to study the physical mechanisms underlying turbulence has important advantages over the traditional approach of studying the dynamics of individual realizations of turbulence. One advantage is that the analytical structure of S3T statistical state dynamics models isolates the interaction between the mean flow and the perturbation components of the turbulence. Isolation of the interaction between these components reveals how this interaction underlies both the maintenance of the turbulence variance by transfer of energy from the externally driven flow to the perturbation components as well as the enforcement of the observed statistical mean turbulent state by feedback regulation between the mean and perturbation fields. Another advantage of studying turbulence using statistical state dynamics models of S3T form is that the analytical structure of S3T turbulence can be completely characterized. For example, the perturbation component of turbulence in the S3T system is demonstrably maintained by a parametric perturbation growth mechanism in which fluctuation of the mean flow maintains the perturbation field which in turn maintains the mean flow fluctuations in a synergistic interaction. Furthermore, the equilibrium
Principles of thermodynamics and statistical mechanics
Lawden, D F
2005-01-01
A thorough exploration of the universal principles of thermodynamics and statistical mechanics, this volume explains the applications of these essential rules to a multitude of situations arising in physics and engineering. It develops their use in a variety of circumstances-including those involving gases, crystals, and magnets-in order to illustrate general methods of analysis and to provide readers with all the necessary background to continue in greater depth with specific topics.Author D. F. Lawden has considerable experience in teaching this subject to university students of varied abili
Brenčič, Mihael
2016-01-01
Northern hemisphere elementary circulation mechanisms, defined with the Dzerdzeevski classification and published on a daily basis from 1899-2012, are analysed with statistical methods as continuous categorical time series. Classification consists of 41 elementary circulation mechanisms (ECM), which are assigned to calendar days. Empirical marginal probabilities of each ECM were determined. Seasonality and the periodicity effect were investigated with moving dispersion filters and randomisation procedure on the ECM categories as well as with the time analyses of the ECM mode. The time series were determined as being non-stationary with strong time-dependent trends. During the investigated period, periodicity interchanges with periods when no seasonality is present. In the time series structure, the strongest division is visible at the milestone of 1986, showing that the atmospheric circulation pattern reflected in the ECM has significantly changed. This change is result of the change in the frequency of ECM categories; before 1986, the appearance of ECM was more diverse, and afterwards fewer ECMs appear. The statistical approach applied to the categorical climatic time series opens up new potential insight into climate variability and change studies that have to be performed in the future.
Quantum mechanics as applied mathematical statistics
International Nuclear Information System (INIS)
Skala, L.; Cizek, J.; Kapsa, V.
2011-01-01
Basic mathematical apparatus of quantum mechanics like the wave function, probability density, probability density current, coordinate and momentum operators, corresponding commutation relation, Schroedinger equation, kinetic energy, uncertainty relations and continuity equation is discussed from the point of view of mathematical statistics. It is shown that the basic structure of quantum mechanics can be understood as generalization of classical mechanics in which the statistical character of results of measurement of the coordinate and momentum is taken into account and the most important general properties of statistical theories are correctly respected.
Statistical mechanics principles and selected applications
Hill, Terrell L
1956-01-01
""Excellent … a welcome addition to the literature on the subject."" - ScienceBefore the publication of this standard, oft-cited book, there were few if any statistical-mechanics texts that incorporated reviews of both fundamental principles and recent developments in the field.In this volume, Professor Hill offers just such a dual presentation - a useful account of basic theory and of its applications, made accessible in a comprehensive format. The book opens with concise, unusually clear introductory chapters on classical statistical mechanics, quantum statistical mechanics and the relatio
Thermalized solutions, statistical mechanics and turbulence
Indian Academy of Sciences (India)
2015-02-20
Feb 20, 2015 ... In this study, we examine the intriguing connection between turbulence and equilibrium statistical mechanics. There are several recent works which emphasize this connection. Thus in the last ... Current Issue : Vol. 90, Issue 6.
Science Academies' Refresher Course in Statistical Mechanics
Indian Academy of Sciences (India)
2018-02-27
Feb 27, 2018 ... Post Graduate and Research Department of Physics. Bishop Moore ... The Course will cover the basic and advanced topics of Statistical. Mechanics ... Courses of good standing for promotion, vide notification. F3-1/2009 ...
Is there a statistical mechanics of turbulence?
International Nuclear Information System (INIS)
Kraichnan, R.H.; Chen, S.Y.
1988-09-01
The statistical-mechanical treatment of turbulence is made questionable by strong nonlinearity and strong disequilibrium that result in the creation of ordered structures imbedded in disorder. Model systems are described which may provide some hope that a compact, yet faithful, statistical description of turbulence nevertheless is possible. Some essential dynamic features of the models are captured by low-order statistical approximations despite strongly non-Gaussian behavior. 31 refs., 5 figs
Projection operator techniques in nonequilibrium statistical mechanics
International Nuclear Information System (INIS)
Grabert, H.
1982-01-01
This book is an introduction to the application of the projection operator technique to the statistical mechanics of irreversible processes. After a general introduction to the projection operator technique and statistical thermodynamics the Fokker-Planck and the master equation approach are described together with the response theory. Then, as applications the damped harmonic oscillator, simple fluids, and the spin relaxation are considered. (HSI)
Per Object statistical analysis
DEFF Research Database (Denmark)
2008-01-01
of a specific class in turn, and uses as pair of PPO stages to derive the statistics and then assign them to the objects' Object Variables. It may be that this could all be done in some other, simply way, but several other ways that were tried did not succeed. The procedure ouptut has been tested against...
Statistical Analysis and validation
Hoefsloot, H.C.J.; Horvatovich, P.; Bischoff, R.
2013-01-01
In this chapter guidelines are given for the selection of a few biomarker candidates from a large number of compounds with a relative low number of samples. The main concepts concerning the statistical validation of the search for biomarkers are discussed. These complicated methods and concepts are
Thermodynamics and statistical mechanics an integrated approach
Shell, M Scott
2015-01-01
Learn classical thermodynamics alongside statistical mechanics with this fresh approach to the subjects. Molecular and macroscopic principles are explained in an integrated, side-by-side manner to give students a deep, intuitive understanding of thermodynamics and equip them to tackle future research topics that focus on the nanoscale. Entropy is introduced from the get-go, providing a clear explanation of how the classical laws connect to the molecular principles, and closing the gap between the atomic world and thermodynamics. Notation is streamlined throughout, with a focus on general concepts and simple models, for building basic physical intuition and gaining confidence in problem analysis and model development. Well over 400 guided end-of-chapter problems are included, addressing conceptual, fundamental, and applied skill sets. Numerous worked examples are also provided together with handy shaded boxes to emphasize key concepts, making this the complete teaching package for students in chemical engineer...
The large deviation approach to statistical mechanics
International Nuclear Information System (INIS)
Touchette, Hugo
2009-01-01
The theory of large deviations is concerned with the exponential decay of probabilities of large fluctuations in random systems. These probabilities are important in many fields of study, including statistics, finance, and engineering, as they often yield valuable information about the large fluctuations of a random system around its most probable state or trajectory. In the context of equilibrium statistical mechanics, the theory of large deviations provides exponential-order estimates of probabilities that refine and generalize Einstein's theory of fluctuations. This review explores this and other connections between large deviation theory and statistical mechanics, in an effort to show that the mathematical language of statistical mechanics is the language of large deviation theory. The first part of the review presents the basics of large deviation theory, and works out many of its classical applications related to sums of random variables and Markov processes. The second part goes through many problems and results of statistical mechanics, and shows how these can be formulated and derived within the context of large deviation theory. The problems and results treated cover a wide range of physical systems, including equilibrium many-particle systems, noise-perturbed dynamics, nonequilibrium systems, as well as multifractals, disordered systems, and chaotic systems. This review also covers many fundamental aspects of statistical mechanics, such as the derivation of variational principles characterizing equilibrium and nonequilibrium states, the breaking of the Legendre transform for nonconcave entropies, and the characterization of nonequilibrium fluctuations through fluctuation relations.
The large deviation approach to statistical mechanics
Touchette, Hugo
2009-07-01
The theory of large deviations is concerned with the exponential decay of probabilities of large fluctuations in random systems. These probabilities are important in many fields of study, including statistics, finance, and engineering, as they often yield valuable information about the large fluctuations of a random system around its most probable state or trajectory. In the context of equilibrium statistical mechanics, the theory of large deviations provides exponential-order estimates of probabilities that refine and generalize Einstein’s theory of fluctuations. This review explores this and other connections between large deviation theory and statistical mechanics, in an effort to show that the mathematical language of statistical mechanics is the language of large deviation theory. The first part of the review presents the basics of large deviation theory, and works out many of its classical applications related to sums of random variables and Markov processes. The second part goes through many problems and results of statistical mechanics, and shows how these can be formulated and derived within the context of large deviation theory. The problems and results treated cover a wide range of physical systems, including equilibrium many-particle systems, noise-perturbed dynamics, nonequilibrium systems, as well as multifractals, disordered systems, and chaotic systems. This review also covers many fundamental aspects of statistical mechanics, such as the derivation of variational principles characterizing equilibrium and nonequilibrium states, the breaking of the Legendre transform for nonconcave entropies, and the characterization of nonequilibrium fluctuations through fluctuation relations.
The Dirac equation in classical statistical mechanics
International Nuclear Information System (INIS)
Ord, G.N.
2002-01-01
The Dirac equation, usually obtained by 'quantizing' a classical stochastic model is here obtained directly within classical statistical mechanics. The special underlying space-time geometry of the random walk replaces the missing analytic continuation, making the model 'self-quantizing'. This provides a new context for the Dirac equation, distinct from its usual context in relativistic quantum mechanics
Emergence of quantum mechanics from classical statistics
International Nuclear Information System (INIS)
Wetterich, C
2009-01-01
The conceptual setting of quantum mechanics is subject to an ongoing debate from its beginnings until now. The consequences of the apparent differences between quantum statistics and classical statistics range from the philosophical interpretations to practical issues as quantum computing. In this note we demonstrate how quantum mechanics can emerge from classical statistical systems. We discuss conditions and circumstances for this to happen. Quantum systems describe isolated subsystems of classical statistical systems with infinitely many states. While infinitely many classical observables 'measure' properties of the subsystem and its environment, the state of the subsystem can be characterized by the expectation values of only a few probabilistic observables. They define a density matrix, and all the usual laws of quantum mechanics follow. No concepts beyond classical statistics are needed for quantum physics - the differences are only apparent and result from the particularities of those classical statistical systems which admit a quantum mechanical description. In particular, we show how the non-commuting properties of quantum operators are associated to the use of conditional probabilities within the classical system, and how a unitary time evolution reflects the isolation of the subsystem.
International Nuclear Information System (INIS)
Hahn, A.A.
1994-11-01
The complexity of instrumentation sometimes requires data analysis to be done before the result is presented to the control room. This tutorial reviews some of the theoretical assumptions underlying the more popular forms of data analysis and presents simple examples to illuminate the advantages and hazards of different techniques
An introduction to thermodynamics and statistical mechanics
Saxena, A K
2016-01-01
An Introduction to Thermodynamics and Statistical Mechanics aims to serve as a text book for undergraduate hons.and postgraduate students of physics. The book covers First Law of Thermodynamics, Entropy and Second Law ofThermodynamics, Thermodynamic Relations, The Statistical Basis of Thermodynamics, Microcanonical Ensemble,Classical Statistical and Canonical Distribution, Grand Canonical Ensemble, Quantum Statistical Mechanics, PhaseTransitions, Fluctuations, Irreversible Processes and Transport Phenomena (Diffusion).SALIENT FEATURES:iC* Offers students a conceptual development of the subjectiC* Review questions at the end of chapters.NEW TO THE SECOND EDITIONiC* PVT SurfacesiC* Real Heat EnginesiC* Van der Waals Models (Qualitative Considerations)iC* Cluster ExpansioniC* Brownian Motion (Einstein's Theory)
Learning Predictive Statistics: Strategies and Brain Mechanisms.
Wang, Rui; Shen, Yuan; Tino, Peter; Welchman, Andrew E; Kourtzi, Zoe
2017-08-30
When immersed in a new environment, we are challenged to decipher initially incomprehensible streams of sensory information. However, quite rapidly, the brain finds structure and meaning in these incoming signals, helping us to predict and prepare ourselves for future actions. This skill relies on extracting the statistics of event streams in the environment that contain regularities of variable complexity from simple repetitive patterns to complex probabilistic combinations. Here, we test the brain mechanisms that mediate our ability to adapt to the environment's statistics and predict upcoming events. By combining behavioral training and multisession fMRI in human participants (male and female), we track the corticostriatal mechanisms that mediate learning of temporal sequences as they change in structure complexity. We show that learning of predictive structures relates to individual decision strategy; that is, selecting the most probable outcome in a given context (maximizing) versus matching the exact sequence statistics. These strategies engage distinct human brain regions: maximizing engages dorsolateral prefrontal, cingulate, sensory-motor regions, and basal ganglia (dorsal caudate, putamen), whereas matching engages occipitotemporal regions (including the hippocampus) and basal ganglia (ventral caudate). Our findings provide evidence for distinct corticostriatal mechanisms that facilitate our ability to extract behaviorally relevant statistics to make predictions. SIGNIFICANCE STATEMENT Making predictions about future events relies on interpreting streams of information that may initially appear incomprehensible. Past work has studied how humans identify repetitive patterns and associative pairings. However, the natural environment contains regularities that vary in complexity from simple repetition to complex probabilistic combinations. Here, we combine behavior and multisession fMRI to track the brain mechanisms that mediate our ability to adapt to
Statistical mechanics and applications in condensed matter
Di Castro, Carlo
2015-01-01
This innovative and modular textbook combines classical topics in thermodynamics, statistical mechanics and many-body theory with the latest developments in condensed matter physics research. Written by internationally renowned experts and logically structured to cater for undergraduate and postgraduate students and researchers, it covers the underlying theoretical principles and includes numerous problems and worked examples to put this knowledge into practice. Three main streams provide a framework for the book; beginning with thermodynamics and classical statistical mechanics, including mean field approximation, fluctuations and the renormalization group approach to critical phenomena. The authors then examine quantum statistical mechanics, covering key topics such as normal Fermi and Luttinger liquids, superfluidity and superconductivity. Finally, they explore classical and quantum kinetics, Anderson localization and quantum interference, and disordered Fermi liquids. Unique in providing a bridge between ...
DEFF Research Database (Denmark)
Ris Hansen, Inge; Søgaard, Karen; Gram, Bibi
2015-01-01
This is the analysis plan for the multicentre randomised control study looking at the effect of training and exercises in chronic neck pain patients that is being conducted in Jutland and Funen, Denmark. This plan will be used as a work description for the analyses of the data collected....
Semiclassical analysis, Witten Laplacians, and statistical mechanis
Helffer, Bernard
2002-01-01
This important book explains how the technique of Witten Laplacians may be useful in statistical mechanics. It considers the problem of analyzing the decay of correlations, after presenting its origin in statistical mechanics. In addition, it compares the Witten Laplacian approach with other techniques, such as the transfer matrix approach and its semiclassical analysis. The author concludes by providing a complete proof of the uniform Log-Sobolev inequality. Contents: Witten Laplacians Approach; Problems in Statistical Mechanics with Discrete Spins; Laplace Integrals and Transfer Operators; S
Fluctuations of physical values in statistical mechanics
International Nuclear Information System (INIS)
Zaripov, R.G.
1999-01-01
The new matrix inequalities for the boundary of measurement accuracy of physical values in the ensemble of quantum systems were obtained. The multidimensional thermodynamical parameter measurement is estimated. The matrix inequalities obtained are quantum analogs of the Cramer-Rao information inequalities in mathematical statistics. The quantity of information in quantum mechanical measurement, connected with the boundaries of jointly measurable values in one macroscopic experiment was determined. The lower boundary of the variance of estimation of multidimensional quantum mechanical parameter was found. (author)
(ajst) statistical mechanics model for orientational
African Journals Online (AJOL)
Science and Engineering Series Vol. 6, No. 2, pp. 94 - 101. STATISTICAL MECHANICS MODEL FOR ORIENTATIONAL. MOTION OF TWO-DIMENSIONAL RIGID ROTATOR. Malo, J.O. ... there is no translational motion and that they are well separated so .... constant and I is the moment of inertia of a linear rotator. Thus, the ...
Statistical-mechanical formulation of Lyapunov exponents
International Nuclear Information System (INIS)
Tanase-Nicola, Sorin; Kurchan, Jorge
2003-01-01
We show how the Lyapunov exponents of a dynamic system can, in general, be expressed in terms of the free energy of a (non-Hermitian) quantum many-body problem. This puts their study as a problem of statistical mechanics, whose intuitive concepts and techniques of approximation can hence be borrowed
Multiparticle quantum mechanics obeying fractional statistics
International Nuclear Information System (INIS)
Wu, Y.
1984-01-01
We obtain the rule governing many-body wave functions for particles obeying fractional statistics in two (space) dimensions. It generalizes and continuously interpolates the usual symmetrization and antisymmetrization. Quantum mechanics of more than two particles is discussed and some new features are found
Statistical mechanics and the foundations of thermodynamics
International Nuclear Information System (INIS)
Loef, A.M.
1979-01-01
An introduction to classical statistical mechanics and its relation to thermodynamics is presented. Emphasis is put on getting a detailed and logical presentation of the foundations of thermodynamics based on the maximum entropy principles which govern the values taken by macroscopic variables according to the laws of large numbers
Statistical mechanics of systems of unbounded spins
Energy Technology Data Exchange (ETDEWEB)
Lebowitz, J L [Yeshiva Univ., New York (USA). Belfer Graduate School of Science; Presutti, E [L' Aquila Univ. (Italy). Istituto di Matematica
1976-11-01
We develop the statistical mechanics of unbounded n-component spin systems interacting via potentials which are superstable and strongly tempered. The uniqueness of the equilibrium state is then proven for one component ferromagnetic spins whose free energy is differentiable with respect to the magnetic field.
Infinite Random Graphs as Statistical Mechanical Models
DEFF Research Database (Denmark)
Durhuus, Bergfinnur Jøgvan; Napolitano, George Maria
2011-01-01
We discuss two examples of infinite random graphs obtained as limits of finite statistical mechanical systems: a model of two-dimensional dis-cretized quantum gravity defined in terms of causal triangulated surfaces, and the Ising model on generic random trees. For the former model we describe a ...
Research design and statistical analysis
Myers, Jerome L; Lorch Jr, Robert F
2013-01-01
Research Design and Statistical Analysis provides comprehensive coverage of the design principles and statistical concepts necessary to make sense of real data. The book's goal is to provide a strong conceptual foundation to enable readers to generalize concepts to new research situations. Emphasis is placed on the underlying logic and assumptions of the analysis and what it tells the researcher, the limitations of the analysis, and the consequences of violating assumptions. Sampling, design efficiency, and statistical models are emphasized throughout. As per APA recommendations
The Statistical Mechanics of Ideal MHD Turbulence
Shebalin, John V.
2003-01-01
Turbulence is a universal, nonlinear phenomenon found in all energetic fluid and plasma motion. In particular. understanding magneto hydrodynamic (MHD) turbulence and incorporating its effects in the computation and prediction of the flow of ionized gases in space, for example, are great challenges that must be met if such computations and predictions are to be meaningful. Although a general solution to the "problem of turbulence" does not exist in closed form, numerical integrations allow us to explore the phase space of solutions for both ideal and dissipative flows. For homogeneous, incompressible turbulence, Fourier methods are appropriate, and phase space is defined by the Fourier coefficients of the physical fields. In the case of ideal MHD flows, a fairly robust statistical mechanics has been developed, in which the symmetry and ergodic properties of phase space is understood. A discussion of these properties will illuminate our principal discovery: Coherent structure and randomness co-exist in ideal MHD turbulence. For dissipative flows, as opposed to ideal flows, progress beyond the dimensional analysis of Kolmogorov has been difficult. Here, some possible future directions that draw on the ideal results will also be discussed. Our conclusion will be that while ideal turbulence is now well understood, real turbulence still presents great challenges.
Bayesian approach to inverse statistical mechanics
Habeck, Michael
2014-05-01
Inverse statistical mechanics aims to determine particle interactions from ensemble properties. This article looks at this inverse problem from a Bayesian perspective and discusses several statistical estimators to solve it. In addition, a sequential Monte Carlo algorithm is proposed that draws the interaction parameters from their posterior probability distribution. The posterior probability involves an intractable partition function that is estimated along with the interactions. The method is illustrated for inverse problems of varying complexity, including the estimation of a temperature, the inverse Ising problem, maximum entropy fitting, and the reconstruction of molecular interaction potentials.
Nonextensive statistical mechanics of ionic solutions
International Nuclear Information System (INIS)
Varela, L.M.; Carrete, J.; Munoz-Sola, R.; Rodriguez, J.R.; Gallego, J.
2007-01-01
Classical mean-field Poisson-Boltzmann theory of ionic solutions is revisited in the theoretical framework of nonextensive Tsallis statistics. The nonextensive equivalent of Poisson-Boltzmann equation is formulated revisiting the statistical mechanics of liquids and the Debye-Hueckel framework is shown to be valid for highly diluted solutions even under circumstances where nonextensive thermostatistics must be applied. The lowest order corrections associated to nonadditive effects are identified for both symmetric and asymmetric electrolytes and the behavior of the average electrostatic potential in a homogeneous system is analytically and numerically analyzed for various values of the complexity measurement nonextensive parameter q
An introduction to statistical mechanics and thermodynamics
Swendsen, Robert H
2012-01-01
This text presents the two complementary aspects of thermal physics as an integrated theory of the properties of matter. Conceptual understanding is promoted by thorough development of basic concepts. In contrast to many texts, statistical mechanics, including discussion of the required probability theory, is presented first. This provides a statistical foundation for the concept of entropy, which is central to thermal physics. A unique feature of the book is the development ofentropy based on Boltzmann's 1877 definition; this avoids contradictions or ad hoc corrections found in other texts. D
Quantum mechanics as a natural generalization of classical statistical mechanics
International Nuclear Information System (INIS)
Xu Laizi; Qian Shangwu
1994-01-01
By comparison between equations of motion of geometrical optics (GO) and that of classical statistical mechanics (CSM), it is found that there should be an analogy between GO and CSM instead of GO and classical mechanics (CM). Furthermore, by comparison between the classical limit (CL) of quantum mechanics (QM) and CSM, the authors find that CL of QM is CSM not CM, hence they demonstrated that QM is a natural generalization of CSM instead of CM
Analogies between classical statistical mechanics and quantum mechanics
International Nuclear Information System (INIS)
Uehara, M.
1986-01-01
Some analogies between nonequilibrium classical statistical mechanics and quantum mechanics, at the level of the Liouville equation and at the kinetic level, are commented on. A theorem, related to the Vlasov equation applied to a plasma, is proved. The theorem presents an analogy with Ehrenfest's theorem of quantum mechanics. An analogy between the plasma kinetic theory and Bohm's quantum theory with 'hidden variables' is also shown. (Author) [pt
Regularized Statistical Analysis of Anatomy
DEFF Research Database (Denmark)
Sjöstrand, Karl
2007-01-01
This thesis presents the application and development of regularized methods for the statistical analysis of anatomical structures. Focus is on structure-function relationships in the human brain, such as the connection between early onset of Alzheimer’s disease and shape changes of the corpus...... and mind. Statistics represents a quintessential part of such investigations as they are preluded by a clinical hypothesis that must be verified based on observed data. The massive amounts of image data produced in each examination pose an important and interesting statistical challenge...... efficient algorithms which make the analysis of large data sets feasible, and gives examples of applications....
Detomi, Anine Cristina; Filho, Sergio Luiz Moni Ribeiro; Panzera, Túlio H C; Schiavon, Marco Antonio; Silva, Vania R V; Scarpa, Fabrizio
2016-01-01
This work investigates the mechanical behavior of cementitious composites (mortar) when quartz inclusions are totally or partially replaced with polyethylene terephthalate (PET) particles. A full factorial design is performed to identify the effect of the water/cement ratio and the range of quartz particles size used in the replacement on the different mechanical and physical parameters (bulk density, apparent porosity, water absorption, oxygen permeability, compressive strength, and modulus ...
Cellular automata and statistical mechanical models
International Nuclear Information System (INIS)
Rujan, P.
1987-01-01
The authors elaborate on the analogy between the transfer matrix of usual lattice models and the master equation describing the time development of cellular automata. Transient and stationary properties of probabilistic automata are linked to surface and bulk properties, respectively, of restricted statistical mechanical systems. It is demonstrated that methods of statistical physics can be successfully used to describe the dynamic and the stationary behavior of such automata. Some exact results are derived, including duality transformations, exact mappings, disorder, and linear solutions. Many examples are worked out in detail to demonstrate how to use statistical physics in order to construct cellular automata with desired properties. This approach is considered to be a first step toward the design of fully parallel, probabilistic systems whose computational abilities rely on the cooperative behavior of their components
Mathematical methods in quantum and statistical mechanics
International Nuclear Information System (INIS)
Fishman, L.
1977-01-01
The mathematical structure and closed-form solutions pertaining to several physical problems in quantum and statistical mechanics are examined in some detail. The J-matrix method, introduced previously for s-wave scattering and based upon well-established Hilbert Space theory and related generalized integral transformation techniques, is extended to treat the lth partial wave kinetic energy and Coulomb Hamiltonians within the context of square integrable (L 2 ), Laguerre (Slater), and oscillator (Gaussian) basis sets. The theory of relaxation in statistical mechanics within the context of the theory of linear integro-differential equations of the Master Equation type and their corresponding Markov processes is examined. Several topics of a mathematical nature concerning various computational aspects of the L 2 approach to quantum scattering theory are discussed
Equilibrium statistical mechanics of lattice models
Lavis, David A
2015-01-01
Most interesting and difficult problems in equilibrium statistical mechanics concern models which exhibit phase transitions. For graduate students and more experienced researchers this book provides an invaluable reference source of approximate and exact solutions for a comprehensive range of such models. Part I contains background material on classical thermodynamics and statistical mechanics, together with a classification and survey of lattice models. The geometry of phase transitions is described and scaling theory is used to introduce critical exponents and scaling laws. An introduction is given to finite-size scaling, conformal invariance and Schramm—Loewner evolution. Part II contains accounts of classical mean-field methods. The parallels between Landau expansions and catastrophe theory are discussed and Ginzburg—Landau theory is introduced. The extension of mean-field theory to higher-orders is explored using the Kikuchi—Hijmans—De Boer hierarchy of approximations. In Part III the use of alge...
Statistical mechanics and the physics of fluids
Tosi, Mario
This volume collects the lecture notes of a course on statistical mechanics, held at Scuola Normale Superiore di Pisa for third-to-fifth year students in physics and chemistry. Three main themes are covered in the book. The first part gives a compact presentation of the foundations of statistical mechanics and their connections with thermodynamics. Applications to ideal gases of material particles and of excitation quanta are followed by a brief introduction to a real classical gas and to a weakly coupled classical plasma, and by a broad overview on the three states of matter.The second part is devoted to fluctuations around equilibrium and their correlations. Coverage of liquid structure and critical phenomena is followed by a discussion of irreversible processes as exemplified by diffusive motions and by the dynamics of density and heat fluctuations. Finally, the third part is an introduction to some advanced themes: supercooling and the glassy state, non-Newtonian fluids including polymers and liquid cryst...
Nonextensive statistical mechanics and high energy physics
Directory of Open Access Journals (Sweden)
Tsallis Constantino
2014-04-01
Full Text Available The use of the celebrated Boltzmann-Gibbs entropy and statistical mechanics is justified for ergodic-like systems. In contrast, complex systems typically require more powerful theories. We will provide a brief introduction to nonadditive entropies (characterized by indices like q, which, in the q → 1 limit, recovers the standard Boltzmann-Gibbs entropy and associated nonextensive statistical mechanics. We then present somerecent applications to systems such as high-energy collisions, black holes and others. In addition to that, we clarify and illustrate the neat distinction that exists between Lévy distributions and q-exponential ones, a point which occasionally causes some confusion in the literature, very particularly in the LHC literature
Zeno dynamics in quantum statistical mechanics
International Nuclear Information System (INIS)
Schmidt, Andreas U
2003-01-01
We study the quantum Zeno effect in quantum statistical mechanics within the operator algebraic framework. We formulate a condition for the appearance of the effect in W*-dynamical systems, in terms of the short-time behaviour of the dynamics. Examples of quantum spin systems show that this condition can be effectively applied to quantum statistical mechanical models. Furthermore, we derive an explicit form of the Zeno generator, and use it to construct Gibbs equilibrium states for the Zeno dynamics. As a concrete example, we consider the X-Y model, for which we show that a frequent measurement at a microscopic level, e.g. a single lattice site, can produce a macroscopic effect in changing the global equilibrium
Introductory statistical mechanics for electron storage rings
International Nuclear Information System (INIS)
Jowett, J.M.
1986-07-01
These lectures introduce the beam dynamics of electron-positron storage rings with particular emphasis on the effects due to synchrotron radiation. They differ from most other introductions in their systematic use of the physical principles and mathematical techniques of the non-equilibrium statistical mechanics of fluctuating dynamical systems. A self-contained exposition of the necessary topics from this field is included. Throughout the development, a Hamiltonian description of the effects of the externally applied fields is maintained in order to preserve the links with other lectures on beam dynamics and to show clearly the extent to which electron dynamics in non-Hamiltonian. The statistical mechanical framework is extended to a discussion of the conceptual foundations of the treatment of collective effects through the Vlasov equation
International Nuclear Information System (INIS)
Shiino, Masatoshi; Yamana, Michiko
2004-01-01
We study the statistical mechanical aspects of stochastic analog neural network models for associative memory with correlation type learning. We take three approaches to derive the set of the order parameter equations for investigating statistical properties of retrieval states: the self-consistent signal-to-noise analysis (SCSNA), the Thouless-Anderson-Palmer (TAP) equation, and the replica symmetric calculation. On the basis of the cavity method the SCSNA can be generalized to deal with stochastic networks. We establish the close connection between the TAP equation and the SCSNA to elucidate the relationship between the Onsager reaction term of the TAP equation and the output proportional term of the SCSNA that appear in the expressions for the local fields
Statistical algebraic approach to quantum mechanics
International Nuclear Information System (INIS)
Slavnov, D.A.
2001-01-01
The scheme for plotting the quantum theory with application of the statistical algebraic approach is proposed. The noncommutative algebra elements (observed ones) and nonlinear functionals on this algebra (physical state) are used as the primary constituents. The latter ones are associated with the single-unit measurement results. Certain physical state groups are proposed to consider as quantum states of the standard quantum mechanics. It is shown that the mathematical apparatus of the standard quantum mechanics may be reproduced in such a scheme in full volume [ru
Exactly soluble problems in statistical mechanics
International Nuclear Information System (INIS)
Yang, C.N.
1983-01-01
In the last few years, a number of two-dimensional classical and one-dimensional quantum mechanical problems in statistical mechanics have been exactly solved. Although these problems range over models of diverse physical interest, their solutions were obtained using very similar mathematical methods. In these lectures, the main points of the methods are discussed. In this introductory lecture, an overall survey of all these problems without going into the detailed method of solution is given. In later lectures, they shall concentrate on one particular problem: the delta function interaction in one dimension, and go into the details of that problem
Classical statistical mechanics approach to multipartite entanglement
Energy Technology Data Exchange (ETDEWEB)
Facchi, P [Dipartimento di Matematica, Universita di Bari, I-70125 Bari (Italy); Florio, G; Pascazio, S [Istituto Nazionale di Fisica Nucleare, Sezione di Bari, I-70126 Bari (Italy); Marzolino, U [Dipartimento di Fisica, Universita di Trieste, and Istituto Nazionale di Fisica Nucleare, Sezione di Trieste, I-34014 Trieste (Italy); Parisi, G [Dipartimento di Fisica, Universita di Roma ' La Sapienza' , Piazzale Aldo Moro 2, Centre for Statistical Mechanics and Complexity (SMC), CNR-INFM (Italy)
2010-06-04
We characterize the multipartite entanglement of a system of n qubits in terms of the distribution function of the bipartite purity over balanced bipartitions. We search for maximally multipartite entangled states, whose average purity is minimal, and recast this optimization problem into a problem of statistical mechanics, by introducing a cost function, a fictitious temperature and a partition function. By investigating the high-temperature expansion, we obtain the first three moments of the distribution. We find that the problem exhibits frustration.
Classical statistical mechanics approach to multipartite entanglement
Facchi, P.; Florio, G.; Marzolino, U.; Parisi, G.; Pascazio, S.
2010-06-01
We characterize the multipartite entanglement of a system of n qubits in terms of the distribution function of the bipartite purity over balanced bipartitions. We search for maximally multipartite entangled states, whose average purity is minimal, and recast this optimization problem into a problem of statistical mechanics, by introducing a cost function, a fictitious temperature and a partition function. By investigating the high-temperature expansion, we obtain the first three moments of the distribution. We find that the problem exhibits frustration.
Classical statistical mechanics approach to multipartite entanglement
International Nuclear Information System (INIS)
Facchi, P; Florio, G; Pascazio, S; Marzolino, U; Parisi, G
2010-01-01
We characterize the multipartite entanglement of a system of n qubits in terms of the distribution function of the bipartite purity over balanced bipartitions. We search for maximally multipartite entangled states, whose average purity is minimal, and recast this optimization problem into a problem of statistical mechanics, by introducing a cost function, a fictitious temperature and a partition function. By investigating the high-temperature expansion, we obtain the first three moments of the distribution. We find that the problem exhibits frustration.
Statistical Mechanics and Black Hole Thermodynamics
Carlip, Steven
1997-01-01
Black holes are thermodynamic objects, but despite recent progress, the ultimate statistical mechanical origin of black hole temperature and entropy remains mysterious. Here I summarize an approach in which the entropy is viewed as arising from ``would-be pure gauge'' degrees of freedom that become dynamical at the horizon. For the (2+1)-dimensional black hole, these degrees of freedom can be counted, and yield the correct Bekenstein-Hawking entropy; the corresponding problem in 3+1 dimension...
Statistical mechanics of budget-constrained auctions
Altarelli, F.; Braunstein, A.; Realpe-Gomez, J.; Zecchina, R.
2009-01-01
Finding the optimal assignment in budget-constrained auctions is a combinatorial optimization problem with many important applications, a notable example being the sale of advertisement space by search engines (in this context the problem is often referred to as the off-line AdWords problem). Based on the cavity method of statistical mechanics, we introduce a message passing algorithm that is capable of solving efficiently random instances of the problem extracted from a natural distribution,...
The statistical mechanics of learning a rule
International Nuclear Information System (INIS)
Watkin, T.L.H.; Rau, A.; Biehl, M.
1993-01-01
A summary is presented of the statistical mechanical theory of learning a rule with a neural network, a rapidly advancing area which is closely related to other inverse problems frequently encountered by physicists. By emphasizing the relationship between neural networks and strongly interacting physical systems, such as spin glasses, the authors show how learning theory has provided a workshop in which to develop new, exact analytical techniques
Statistical mechanics of the majority game
International Nuclear Information System (INIS)
Kozlowski, P; Marsili, M
2003-01-01
The majority game, modelling a system of heterogeneous agents trying to behave in a similar way, is introduced and studied using methods of statistical mechanics. The stationary states of the game are given by the (local) minima of a particular Hopfield-like Hamiltonian. On the basis of replica symmetric calculations, we draw the phase diagram, which contains the analogue of a retrieval phase. The number of metastable states is estimated using the annealed approximation. The results are confronted with extensive numerical simulations
Statistical Mechanics of Money, Income, and Wealth
Yakovenko, Victor
2006-03-01
In Ref. [1], we proposed an analogy between the exponential Boltzmann-Gibbs distribution of energy in physics and the equilibrium probability distribution of money in a closed economic system. Analogously to energy, money is locally conserved in interactions between economic agents, so the thermal Boltzmann-Gibbs distribution function is expected for money. Since then, many researchers followed and expanded this idea [2]. Much work was done on the analysis of empirical data, mostly on income, for which a lot of tax and census data is available. We demonstrated [3] that income distribution in the USA has a well-defined two-class structure. The majority of population (97-99%) belongs to the lower class characterized by the exponential Boltzmann-Gibbs (``thermal'') distribution. The upper class (1-3% of population) has a Pareto power-law (``superthermal'') distribution, whose parameters change in time with the rise and fall of stock market. We proposed a concept of equilibrium inequality in a society, based on the principle of maximal entropy, and quantitatively demonstrated that it applies to the majority of population. Income distribution in other countries shows similar patterns. For more references, see http://www2.physics.umd.edu/˜yakovenk/econophysics.html. References: [1] A. A. Dragulescu and V. M. Yakovenko, ``Statistical mechanics of money'', Eur. Phys. J. B 17, 723 (2000). [2] ``Econophysics of Wealth Distributions'', edited by A. Chatterjee, S. Yarlagadda, and B. K. Chakrabarti, Springer, 2005. [3] A. C. Silva and V. M. Yakovenko, ``Temporal evolution of the `thermal' and `superthermal' income classes in the USA during 1983-2001'', Europhys. Lett. 69, 304 (2005).
Statistical mechanics for a class of quantum statistics
International Nuclear Information System (INIS)
Isakov, S.B.
1994-01-01
Generalized statistical distributions for identical particles are introduced for the case where filling a single-particle quantum state by particles depends on filling states of different momenta. The system of one-dimensional bosons with a two-body potential that can be solved by means of the thermodynamic Bethe ansatz is shown to be equivalent thermodynamically to a system of free particles obeying statistical distributions of the above class. The quantum statistics arising in this way are completely determined by the two-particle scattering phases of the corresponding interacting systems. An equation determining the statistical distributions for these statistics is derived
International Nuclear Information System (INIS)
Jabeen, S.; Raza, S.M.; Ahmed, M.A.; Zai, M.Y.; Akbar, S.; Jafri, Y.Z.
2012-01-01
We studied Faujasite type molecular sieves by using Fermi Dirac statistics and the quantum theory of dielectricity. We developed an empirical relationship for quantum capacitance which follows an inverse Gaussian profile in the frequency range of 66 Hz - 3 MHz. We calculated quantum capacitance, sample crystal momentum, charge quantization and quantized energy of Faujasite type molecular sieves in the frequency range of 0.1 Hz - 10/sup 4/ MHz. Our calculations for diameter of sodalite and super-cages of Faujasite type molecular sieves are in agreement with experimental results reported in this manuscript. We also calculated quantum polarizability, quantized molecular field, orientational polarizability and deformation polarizability by using experimental results of Ligia Frunza etal. The phonons are over damped in the frequency range 0.1 Hz - 10 kHz and become a source for producing cages in the Faujasite type molecular sieves. Ion exchange recovery processes occur due to over damped phonon excitations in Faujasite type molecular sieves and with increasing temperatures. (author)
Rani Rana, Sandhya; Pattnaik, A. B.; Patnaik, S. C.
2018-03-01
In the present work the wear behavior and mechanical properties of as cast A16082 and A16086-T6 were compared and analyzed using statistical analysis. The as cast Al6082 alloy was solutionized at 550°C, quenched and artificially aged at 170°C for 8hrs. Metallographic examination and XRD analysis revealed the presence of intermetallic compounds Al6Mn.Hardness of heat treated Al6082 was found to be more than as cast sample. Wear tests were carried out using Pin on Disc wear testing machine according to Taguchi L9 orthogonal array. Experiments were conducted under normal load 10-30N, sliding speed 1-3m/s, sliding distance 400,800,1200m respectively. Sliding speed was found to be the dominant factor for wear in both as cast and aged Al 6082 alloy. Sliding distance increases the wear rate up to 800m and then after it decreases.
Statistical mechanics of lattice Boson field theory
International Nuclear Information System (INIS)
1976-01-01
A lattice approximation to Euclidean, boson quantum field theory is expressed in terms of the thermodynamic properties of a classical statistical mechanical system near its critical point in a sufficiently general way to permit the inclusion of an anomalous dimension of the vacuum. Using the thermodynamic properties of the Ising model, one can begin to construct nontrivial (containing scattering) field theories in 2, 3 and 4 dimensions. It is argued that, depending on the choice of the bare coupling constant, there are three types of behavior to be expected: the perturbation theory region, the renormalization group fixed point region, and the Ising model region
Quantum field theory and statistical mechanics
International Nuclear Information System (INIS)
Jegerlehner, F.
1975-01-01
At first a heuristic understanding is given how the relation between quantum field theory and statistical mechanics near phase transitions comes about. A long range scale invariant theory is constructed, critical indices are calculated and the relations among them are proved, field theoretical Kadanoff-scale transformations are formulated and scaling corrections calculated. A precise meaning to many of Kadanoffs considerations and a model matching Wegners phenomenological scheme is given. It is shown, that soft parametrization is most transparent for the discussion of scaling behaviour. (BJ) [de
Statistical mechanics of spatial evolutionary games
International Nuclear Information System (INIS)
Miekisz, Jacek
2004-01-01
We discuss the long-run behaviour of stochastic dynamics of many interacting players in spatial evolutionary games. In particular, we investigate the effect of the number of players and the noise level on the stochastic stability of Nash equilibria. We discuss similarities and differences between systems of interacting players maximizing their individual payoffs and particles minimizing their interaction energy. We use concepts and techniques of statistical mechanics to study game-theoretic models. In order to obtain results in the case of the so-called potential games, we analyse the thermodynamic limit of the appropriate models of interacting particles
Statistical mechanics out of equilibrium the irreversibility
International Nuclear Information System (INIS)
Alvarez Estrada, R. F.
2001-01-01
A Round Table about the issue of Irreversibility and related matters has taken place during the last (20th) Statistical Mechanics Conference, held in Paris (July 1998). This article tries to provide a view (necessarily limited, and hence, uncompleted) of some approaches to the subject: the one based upon deterministic chaos (which is currently giving rise to a very active research) and the classical interpretation due to Boltzmann. An attempt has been made to write this article in a self-contained way, and to avoid a technical presentation wherever possible. (Author) 29 refs
Thermodynamics and statistical mechanics an integrated approach
Hardy, Robert J
2014-01-01
This textbook brings together the fundamentals of the macroscopic and microscopic aspects of thermal physics by presenting thermodynamics and statistical mechanics as complementary theories based on small numbers of postulates. The book is designed to give the instructor flexibility in structuring courses for advanced undergraduates and/or beginning graduate students and is written on the principle that a good text should also be a good reference. The presentation of thermodynamics follows the logic of Clausius and Kelvin while relating the concepts involved to familiar phenomena and the mod
Statistical mechanics of lattice boson field theory
International Nuclear Information System (INIS)
Baker, G.A. Jr.
1977-01-01
A lattice approximation to Euclidean, boson quantum field theory is expressed in terms of the thermodynamic properties of a classical statistical mechanical system near its critical point in a sufficiently general way to permit the inclusion of an anomalous dimension of the vacuum. Using the thermodynamic properties of the Ising model, one can begin to construct nontrivial (containing scattering) field theories in 2, 3, and 4 dimensions. It is argued that, depending on the choice of the bare coupling constant, there are three types of behavior to be expected: the perturbation theory region, the renormalization group fixed point region, and the Ising model region. 24 references
Early years of Computational Statistical Mechanics
Mareschal, Michel
2018-05-01
Evidence that a model of hard spheres exhibits a first-order solid-fluid phase transition was provided in the late fifties by two new numerical techniques known as Monte Carlo and Molecular Dynamics. This result can be considered as the starting point of computational statistical mechanics: at the time, it was a confirmation of a counter-intuitive (and controversial) theoretical prediction by J. Kirkwood. It necessitated an intensive collaboration between the Los Alamos team, with Bill Wood developing the Monte Carlo approach, and the Livermore group, where Berni Alder was inventing Molecular Dynamics. This article tells how it happened.
Directory of Open Access Journals (Sweden)
R. Soundararajan
2015-01-01
Full Text Available Artificial Neural Network (ANN approach was used for predicting and analyzing the mechanical properties of A413 aluminum alloy produced by squeeze casting route. The experiments are carried out with different controlled input variables such as squeeze pressure, die preheating temperature, and melt temperature as per Full Factorial Design (FFD. The accounted absolute process variables produce a casting with pore-free and ideal fine grain dendritic structure resulting in good mechanical properties such as hardness, ultimate tensile strength, and yield strength. As a primary objective, a feed forward back propagation ANN model has been developed with different architectures for ensuring the definiteness of the values. The developed model along with its predicted data was in good agreement with the experimental data, inferring the valuable performance of the optimal model. From the work it was ascertained that, for castings produced by squeeze casting route, the ANN is an alternative method for predicting the mechanical properties and appropriate results can be estimated rather than measured, thereby reducing the testing time and cost. As a secondary objective, quantitative and statistical analysis was performed in order to evaluate the effect of process parameters on the mechanical properties of the castings.
Bayesian Inference in Statistical Analysis
Box, George E P
2011-01-01
The Wiley Classics Library consists of selected books that have become recognized classics in their respective fields. With these new unabridged and inexpensive editions, Wiley hopes to extend the life of these important works by making them available to future generations of mathematicians and scientists. Currently available in the Series: T. W. Anderson The Statistical Analysis of Time Series T. S. Arthanari & Yadolah Dodge Mathematical Programming in Statistics Emil Artin Geometric Algebra Norman T. J. Bailey The Elements of Stochastic Processes with Applications to the Natural Sciences Rob
Statistical mechanics and the foundations of thermodynamics
International Nuclear Information System (INIS)
Martin-Loef, A.
1979-01-01
These lectures are designed as an introduction to classical statistical mechanics and its relation to thermodynamics. They are intended to bridge the gap between the treatment of the subject in physics text books and the modern presentations of mathematically rigorous results. We shall first introduce the probability distributions, ensembles, appropriate for describing systems in equilibrium and consider some of their basic physical applications. We also discuss the problem of approach to equilibrium and how irreversibility comes into the dynamics. We then give a detailed description of how the law of large numbers for macrovariables in equilibrium is derived from the fact that entropy is an extensive quantity in the thermodynamic limit. We show in a natural way how to split the energy changes in an thermodynamical process into work and heat leading to a derivation of the first and second laws of thermodynamics from the rules of thermodynamical equilibrium. We have elaborated this part in detail because we feel it is quite satisfactory, that the establishment of the limit of thermodynamic functions as achieved in the modern development of the mathematical aspects of statistical mechanics allows a more general and logically clearer presentation of the bases of thermodynamics. We close these lectures by presenting the basic facts about fluctuation theory. The treatment aims to be reasonably self-contained both concerning the physics and mathematics needed. No knowledge of quantum mechanics is presupposed. Since we spent a large part on mathematical proofs and give many technical facts these lectures are probably most digestive for the mathematically inclined reader who wants to understand the physics of the subject. (HJ)
The statistical analysis of anisotropies
International Nuclear Information System (INIS)
Webster, A.
1977-01-01
One of the many uses to which a radio survey may be put is an analysis of the distribution of the radio sources on the celestial sphere to find out whether they are bunched into clusters or lie in preferred regions of space. There are many methods of testing for clustering in point processes and since they are not all equally good this contribution is presented as a brief guide to what seems to be the best of them. The radio sources certainly do not show very strong clusering and may well be entirely unclustered so if a statistical method is to be useful it must be both powerful and flexible. A statistic is powerful in this context if it can efficiently distinguish a weakly clustered distribution of sources from an unclustered one, and it is flexible if it can be applied in a way which avoids mistaking defects in the survey for true peculiarities in the distribution of sources. The paper divides clustering statistics into two classes: number density statistics and log N/log S statistics. (Auth.)
International Nuclear Information System (INIS)
Tadaki, Kohtaro
2010-01-01
The statistical mechanical interpretation of algorithmic information theory (AIT, for short) was introduced and developed by our former works [K. Tadaki, Local Proceedings of CiE 2008, pp. 425-434, 2008] and [K. Tadaki, Proceedings of LFCS'09, Springer's LNCS, vol. 5407, pp. 422-440, 2009], where we introduced the notion of thermodynamic quantities, such as partition function Z(T), free energy F(T), energy E(T), statistical mechanical entropy S(T), and specific heat C(T), into AIT. We then discovered that, in the interpretation, the temperature T equals to the partial randomness of the values of all these thermodynamic quantities, where the notion of partial randomness is a stronger representation of the compression rate by means of program-size complexity. Furthermore, we showed that this situation holds for the temperature T itself, which is one of the most typical thermodynamic quantities. Namely, we showed that, for each of the thermodynamic quantities Z(T), F(T), E(T), and S(T) above, the computability of its value at temperature T gives a sufficient condition for T is an element of (0,1) to satisfy the condition that the partial randomness of T equals to T. In this paper, based on a physical argument on the same level of mathematical strictness as normal statistical mechanics in physics, we develop a total statistical mechanical interpretation of AIT which actualizes a perfect correspondence to normal statistical mechanics. We do this by identifying a microcanonical ensemble in the framework of AIT. As a result, we clarify the statistical mechanical meaning of the thermodynamic quantities of AIT.
Two statistical mechanics aspects of complex networks
Thurner, Stefan; Biely, Christoly
2006-12-01
By adopting an ensemble interpretation of non-growing rewiring networks, network theory can be reduced to a counting problem of possible network states and an identification of their associated probabilities. We present two scenarios of how different rewirement schemes can be used to control the state probabilities of the system. In particular, we review how by generalizing the linking rules of random graphs, in combination with superstatistics and quantum mechanical concepts, one can establish an exact relation between the degree distribution of any given network and the nodes’ linking probability distributions. In a second approach, we control state probabilities by a network Hamiltonian, whose characteristics are motivated by biological and socio-economical statistical systems. We demonstrate that a thermodynamics of networks becomes a fully consistent concept, allowing to study e.g. ‘phase transitions’ and computing entropies through thermodynamic relations.
Statistical mechanics of magnetized pair Fermi gas
International Nuclear Information System (INIS)
Daicic, J.; Frankel, N.E.; Kowalenko, V.
1993-01-01
Following previous work on the magnetized pair Bose gas this contribution presents the statistical mechanics of the charged relativistic Fermi gas with pair creation in d spatial dimensions. Initially, the gas in no external fields is studied. As a result, expansions for the various thermodynamic functions are obtained in both the μ/m→0 (neutrino) limit, and about the point μ/m =1, where μ is the chemical potential. The thermodynamics of a gas of quantum-number conserving massless fermions is also discussed. Then a complete study of the pair Fermi gas in a homogeneous magnetic field, is presented investigating the behavior of the magnetization over a wide range of field strengths. The inclusion of pairs leads to new results for the net magnetization due to the paramagnetic moment of the spins and the diamagnetic Landau orbits. 20 refs
Current algebra, statistical mechanics and quantum models
Vilela Mendes, R.
2017-11-01
Results obtained in the past for free boson systems at zero and nonzero temperatures are revisited to clarify the physical meaning of current algebra reducible functionals which are associated to systems with density fluctuations, leading to observable effects on phase transitions. To use current algebra as a tool for the formulation of quantum statistical mechanics amounts to the construction of unitary representations of diffeomorphism groups. Two mathematical equivalent procedures exist for this purpose. One searches for quasi-invariant measures on configuration spaces, the other for a cyclic vector in Hilbert space. Here, one argues that the second approach is closer to the physical intuition when modelling complex systems. An example of application of the current algebra methodology to the pairing phenomenon in two-dimensional fermion systems is discussed.
Statistical mechanics of budget-constrained auctions
International Nuclear Information System (INIS)
Altarelli, F; Braunstein, A; Realpe-Gomez, J; Zecchina, R
2009-01-01
Finding the optimal assignment in budget-constrained auctions is a combinatorial optimization problem with many important applications, a notable example being in the sale of advertisement space by search engines (in this context the problem is often referred to as the off-line AdWords problem). On the basis of the cavity method of statistical mechanics, we introduce a message-passing algorithm that is capable of solving efficiently random instances of the problem extracted from a natural distribution, and we derive from its properties the phase diagram of the problem. As the control parameter (average value of the budgets) is varied, we find two phase transitions delimiting a region in which long-range correlations arise
Statistical mechanics of budget-constrained auctions
Altarelli, F.; Braunstein, A.; Realpe-Gomez, J.; Zecchina, R.
2009-07-01
Finding the optimal assignment in budget-constrained auctions is a combinatorial optimization problem with many important applications, a notable example being in the sale of advertisement space by search engines (in this context the problem is often referred to as the off-line AdWords problem). On the basis of the cavity method of statistical mechanics, we introduce a message-passing algorithm that is capable of solving efficiently random instances of the problem extracted from a natural distribution, and we derive from its properties the phase diagram of the problem. As the control parameter (average value of the budgets) is varied, we find two phase transitions delimiting a region in which long-range correlations arise.
Generalized bond percolation and statistical mechanics
International Nuclear Information System (INIS)
Tsallis, C.
1978-05-01
A generalization of traditional bond percolation is performed, in the sens that bonds have now the possibility of partially transmitting the information (a fact which leads to the concept of 'fidelity' of the bond), and also in the sens that, besides the normal tendency to equiprobability, the bonds are allowed to substantially change the information. Furthermore the fidelity is allowed, to become an aleatory variable, and the operational rules concerning the associated distribution laws are determined. Thermally quenched random bonds and the whole body of Statistical Mechanics become particular cases of this formalism, which is in general adapted to the treatment of all problems whose main characteristic is to preserve a part of the information through a long path or array (critical phenomena, regime changements, thermal random models, etc). Operationally it provides a quick method for the calculation of the equivalent probability of complex clusters within the traditional bond percolation problem [pt
Statistical mechanics of dense granular media
International Nuclear Information System (INIS)
Coniglio, A; Fierro, A; Nicodemi, M; Ciamarra, M Pica; Tarzia, M
2005-01-01
We discuss some recent results on the statistical mechanics approach to dense granular media. In particular, by analytical mean field investigation we derive the phase diagram of monodisperse and bidisperse granular assemblies. We show that 'jamming' corresponds to a phase transition from a 'fluid' to a 'glassy' phase, observed when crystallization is avoided. The nature of such a 'glassy' phase turns out to be the same as found in mean field models for glass formers. This gives quantitative evidence for the idea of a unified description of the 'jamming' transition in granular media and thermal systems, such as glasses. We also discuss mixing/segregation transitions in binary mixtures and their connections to phase separation and 'geometric' effects
Statistical mechanics of driven diffusive systems
Schmittmann, B
1995-01-01
Far-from-equilibrium phenomena, while abundant in nature, are not nearly as well understood as their equilibrium counterparts. On the theoretical side, progress is slowed by the lack of a simple framework, such as the Boltzmann-Gbbs paradigm in the case of equilibrium thermodynamics. On the experimental side, the enormous structural complexity of real systems poses serious obstacles to comprehension. Similar difficulties have been overcome in equilibrium statistical mechanics by focusing on model systems. Even if they seem too simplistic for known physical systems, models give us considerable insight, provided they capture the essential physics. They serve as important theoretical testing grounds where the relationship between the generic physical behavior and the key ingredients of a successful theory can be identified and understood in detail. Within the vast realm of non-equilibrium physics, driven diffusive systems form a subset with particularly interesting properties. As a prototype model for these syst...
Statistical mechanics of low-density parity-check codes
Energy Technology Data Exchange (ETDEWEB)
Kabashima, Yoshiyuki [Department of Computational Intelligence and Systems Science, Tokyo Institute of Technology, Yokohama 2268502 (Japan); Saad, David [Neural Computing Research Group, Aston University, Birmingham B4 7ET (United Kingdom)
2004-02-13
We review recent theoretical progress on the statistical mechanics of error correcting codes, focusing on low-density parity-check (LDPC) codes in general, and on Gallager and MacKay-Neal codes in particular. By exploiting the relation between LDPC codes and Ising spin systems with multi-spin interactions, one can carry out a statistical mechanics based analysis that determines the practical and theoretical limitations of various code constructions, corresponding to dynamical and thermodynamical transitions, respectively, as well as the behaviour of error-exponents averaged over the corresponding code ensemble as a function of channel noise. We also contrast the results obtained using methods of statistical mechanics with those derived in the information theory literature, and show how these methods can be generalized to include other channel types and related communication problems. (topical review)
Statistical mechanics of low-density parity-check codes
International Nuclear Information System (INIS)
Kabashima, Yoshiyuki; Saad, David
2004-01-01
We review recent theoretical progress on the statistical mechanics of error correcting codes, focusing on low-density parity-check (LDPC) codes in general, and on Gallager and MacKay-Neal codes in particular. By exploiting the relation between LDPC codes and Ising spin systems with multi-spin interactions, one can carry out a statistical mechanics based analysis that determines the practical and theoretical limitations of various code constructions, corresponding to dynamical and thermodynamical transitions, respectively, as well as the behaviour of error-exponents averaged over the corresponding code ensemble as a function of channel noise. We also contrast the results obtained using methods of statistical mechanics with those derived in the information theory literature, and show how these methods can be generalized to include other channel types and related communication problems. (topical review)
Statistical analysis of environmental data
International Nuclear Information System (INIS)
Beauchamp, J.J.; Bowman, K.O.; Miller, F.L. Jr.
1975-10-01
This report summarizes the analyses of data obtained by the Radiological Hygiene Branch of the Tennessee Valley Authority from samples taken around the Browns Ferry Nuclear Plant located in Northern Alabama. The data collection was begun in 1968 and a wide variety of types of samples have been gathered on a regular basis. The statistical analysis of environmental data involving very low-levels of radioactivity is discussed. Applications of computer calculations for data processing are described
BOOK REVIEW: Statistical Mechanics of Turbulent Flows
Cambon, C.
2004-10-01
This is a handbook for a computational approach to reacting flows, including background material on statistical mechanics. In this sense, the title is somewhat misleading with respect to other books dedicated to the statistical theory of turbulence (e.g. Monin and Yaglom). In the present book, emphasis is placed on modelling (engineering closures) for computational fluid dynamics. The probabilistic (pdf) approach is applied to the local scalar field, motivated first by the nonlinearity of chemical source terms which appear in the transport equations of reacting species. The probabilistic and stochastic approaches are also used for the velocity field and particle position; nevertheless they are essentially limited to Lagrangian models for a local vector, with only single-point statistics, as for the scalar. Accordingly, conventional techniques, such as single-point closures for RANS (Reynolds-averaged Navier-Stokes) and subgrid-scale models for LES (large-eddy simulations), are described and in some cases reformulated using underlying Langevin models and filtered pdfs. Even if the theoretical approach to turbulence is not discussed in general, the essentials of probabilistic and stochastic-processes methods are described, with a useful reminder concerning statistics at the molecular level. The book comprises 7 chapters. Chapter 1 briefly states the goals and contents, with a very clear synoptic scheme on page 2. Chapter 2 presents definitions and examples of pdfs and related statistical moments. Chapter 3 deals with stochastic processes, pdf transport equations, from Kramer-Moyal to Fokker-Planck (for Markov processes), and moments equations. Stochastic differential equations are introduced and their relationship to pdfs described. This chapter ends with a discussion of stochastic modelling. The equations of fluid mechanics and thermodynamics are addressed in chapter 4. Classical conservation equations (mass, velocity, internal energy) are derived from their
Statistical considerations on safety analysis
International Nuclear Information System (INIS)
Pal, L.; Makai, M.
2004-01-01
The authors have investigated the statistical methods applied to safety analysis of nuclear reactors and arrived at alarming conclusions: a series of calculations with the generally appreciated safety code ATHLET were carried out to ascertain the stability of the results against input uncertainties in a simple experimental situation. Scrutinizing those calculations, we came to the conclusion that the ATHLET results may exhibit chaotic behavior. A further conclusion is that the technological limits are incorrectly set when the output variables are correlated. Another formerly unnoticed conclusion of the previous ATHLET calculations that certain innocent looking parameters (like wall roughness factor, the number of bubbles per unit volume, the number of droplets per unit volume) can influence considerably such output parameters as water levels. The authors are concerned with the statistical foundation of present day safety analysis practices and can only hope that their own misjudgment will be dispelled. Until then, the authors suggest applying correct statistical methods in safety analysis even if it makes the analysis more expensive. It would be desirable to continue exploring the role of internal parameters (wall roughness factor, steam-water surface in thermal hydraulics codes, homogenization methods in neutronics codes) in system safety codes and to study their effects on the analysis. In the validation and verification process of a code one carries out a series of computations. The input data are not precisely determined because measured data have an error, calculated data are often obtained from a more or less accurate model. Some users of large codes are content with comparing the nominal output obtained from the nominal input, whereas all the possible inputs should be taken into account when judging safety. At the same time, any statement concerning safety must be aleatory, and its merit can be judged only when the probability is known with which the
Aftershock Energy Distribution by Statistical Mechanics Approach
Daminelli, R.; Marcellini, A.
2015-12-01
The aim of our work is to research the most probable distribution of the energy of aftershocks. We started by applying one of the fundamental principles of statistical mechanics that, in case of aftershock sequences, it could be expressed as: the greater the number of different ways in which the energy of aftershocks can be arranged among the energy cells in phase space the more probable the distribution. We assume that each cell in phase space has the same possibility to be occupied, and that more than one cell in the phase space can have the same energy. Seeing that seismic energy is proportional to products of different parameters, a number of different combinations of parameters can produce different energies (e.g., different combination of stress drop and fault area can release the same seismic energy). Let us assume that there are gi cells in the aftershock phase space characterised by the same energy released ɛi. Therefore we can assume that the Maxwell-Boltzmann statistics can be applied to aftershock sequences with the proviso that the judgment on the validity of this hypothesis is the agreement with the data. The aftershock energy distribution can therefore be written as follow: n(ɛ)=Ag(ɛ)exp(-βɛ)where n(ɛ) is the number of aftershocks with energy, ɛ, A and β are constants. Considering the above hypothesis, we can assume g(ɛ) is proportional to ɛ. We selected and analysed different aftershock sequences (data extracted from Earthquake Catalogs of SCEC, of INGV-CNT and other institutions) with a minimum magnitude retained ML=2 (in some cases ML=2.6) and a time window of 35 days. The results of our model are in agreement with the data, except in the very low energy band, where our model resulted in a moderate overestimation.
Statistical mechanics of reacting dense plasmas
Energy Technology Data Exchange (ETDEWEB)
Rogers, F.J.
1978-11-22
A review of the quantum statistical theory of strongly coupled many component plasmas is given. The theoretical development is shown to consist of six separate parts. Compensation between bound and scattering state contributions to the partition function and use of the shifted Debye energy levels are important aspects of the analysis. The results are valid when the electrons are moderately coupled to the heavy ions, i.e., ..lambda../sub e..cap alpha../* < 1, but no restriction is placed on the coupling between heavy ions. Another restriction is that lambda/lambda/sub D/ < 1, i.e., the thermal deBroglie wavelength is less than the Debye length. Numerical calculations of PV/N/sub 0/kT and C/sub V/ are given for a Rubidium plasma.
A quantum information approach to statistical mechanics
International Nuclear Information System (INIS)
Cuevas, G.
2011-01-01
The field of quantum information and computation harnesses and exploits the properties of quantum mechanics to perform tasks more efficiently than their classical counterparts, or that may uniquely be possible in the quantum world. Its findings and techniques have been applied to a number of fields, such as the study of entanglement in strongly correlated systems, new simulation techniques for many-body physics or, generally, to quantum optics. This thesis aims at broadening the scope of quantum information theory by applying it to problems in statistical mechanics. We focus on classical spin models, which are toy models used in a variety of systems, ranging from magnetism, neural networks, to quantum gravity. We tackle these models using quantum information tools from three different angles. First, we show how the partition function of a class of widely different classical spin models (models in different dimensions, different types of many-body interactions, different symmetries, etc) can be mapped to the partition function of a single model. We prove this by first establishing a relation between partition functions and quantum states, and then transforming the corresponding quantum states to each other. Second, we give efficient quantum algorithms to estimate the partition function of various classical spin models, such as the Ising or the Potts model. The proof is based on a relation between partition functions and quantum circuits, which allows us to determine the quantum computational complexity of the partition function by studying the corresponding quantum circuit. Finally, we outline the possibility of applying quantum information concepts and tools to certain models of dis- crete quantum gravity. The latter provide a natural route to generalize our results, insofar as the central quantity has the form of a partition function, and as classical spin models are used as toy models of matter. (author)
Generalized statistical mechanics approaches to earthquakes and tectonics
Papadakis, Giorgos; Michas, Georgios
2016-01-01
Despite the extreme complexity that characterizes the mechanism of the earthquake generation process, simple empirical scaling relations apply to the collective properties of earthquakes and faults in a variety of tectonic environments and scales. The physical characterization of those properties and the scaling relations that describe them attract a wide scientific interest and are incorporated in the probabilistic forecasting of seismicity in local, regional and planetary scales. Considerable progress has been made in the analysis of the statistical mechanics of earthquakes, which, based on the principle of entropy, can provide a physical rationale to the macroscopic properties frequently observed. The scale-invariant properties, the (multi) fractal structures and the long-range interactions that have been found to characterize fault and earthquake populations have recently led to the consideration of non-extensive statistical mechanics (NESM) as a consistent statistical mechanics framework for the description of seismicity. The consistency between NESM and observations has been demonstrated in a series of publications on seismicity, faulting, rock physics and other fields of geosciences. The aim of this review is to present in a concise manner the fundamental macroscopic properties of earthquakes and faulting and how these can be derived by using the notions of statistical mechanics and NESM, providing further insights into earthquake physics and fault growth processes. PMID:28119548
Statistical analysis of JET disruptions
International Nuclear Information System (INIS)
Tanga, A.; Johnson, M.F.
1991-07-01
In the operation of JET and of any tokamak many discharges are terminated by a major disruption. The disruptive termination of a discharge is usually an unwanted event which may cause damage to the structure of the vessel. In a reactor disruptions are potentially a very serious problem, hence the importance of studying them and devising methods to avoid disruptions. Statistical information has been collected about the disruptions which have occurred at JET over a long span of operations. The analysis is focused on the operational aspects of the disruptions rather than on the underlining physics. (Author)
The Brandeis Dice Problem and Statistical Mechanics
van Enk, Steven J.
2014-11-01
Jaynes invented the Brandeis Dice Problem as a simple illustration of the MaxEnt (Maximum Entropy) procedure that he had demonstrated to work so well in Statistical Mechanics. I construct here two alternative solutions to his toy problem. One, like Jaynes' solution, uses MaxEnt and yields an analog of the canonical ensemble, but at a different level of description. The other uses Bayesian updating and yields an analog of the micro-canonical ensemble. Both, unlike Jaynes' solution, yield error bars, whose operational merits I discuss. These two alternative solutions are not equivalent for the original Brandeis Dice Problem, but become so in what must, therefore, count as the analog of the thermodynamic limit, M-sided dice with M → ∞. Whereas the mathematical analogies between the dice problem and Stat Mech are quite close, there are physical properties that the former lacks but that are crucial to the workings of the latter. Stat Mech is more than just MaxEnt.
Plasma Soliton Turbulence and Statistical Mechanics
International Nuclear Information System (INIS)
Treumann, R.A.; Pottelette, R.
1999-01-01
Collisionless kinetic plasma turbulence is described approximately in terms of a superposition of non-interacting solitary waves. We discuss the relevance of such a description under astrophysical conditions. Several types of solitary waves may be of interest in this relation as generators of turbulence and turbulent transport. A consistent theory of turbulence can be given only in a few particular cases when the description can be reduced to the Korteweg-de Vries equation or some other simple equation like the Kadomtsev-Petviashvili equation. It turns out that the soliton turbulence is usually energetically harder than the ordinary weakly turbulent plasma description. This implies that interaction of particles with such kinds of turbulence can lead to stronger acceleration than in ordinary turbulence. However, the description in our model is only classical and non-relativistic. Transport in solitary turbulence is most important for drift wave turbulence. Such waves form solitary drift wave vortices which may provide cross-field transport. A more general discussion is given on transport. In a model of Levy flight trapping of particles in solitons (or solitary turbulence) one finds that the residence time of particles in the region of turbulence may be described by a generalized Lorentzian probability distribution. It is shown that under collisionless equilibrium conditions far away from thermal equilibrium such distributions are natural equilibrium distributions. A consistent thermodynamic description of such media can be given in terms of a generalized Lorentzian statistical mechanics and thermodynamics. (author)
Statistical mechanics, gravity, and Euclidean theory
International Nuclear Information System (INIS)
Fursaev, Dmitri V.
2002-01-01
A review of computations of free energy for Gibbs states on stationary but not static gravitational and gauge backgrounds is given. On these backgrounds wave equations for free fields are reduced to eigenvalue problems which depend non-linearly on the spectral parameter. We present a method to deal with such problems. In particular, we demonstrate how some results of the spectral theory of second-order elliptic operators, such as heat kernel asymptotics, can be extended to a class of non-linear spectral problems. The method is used to trace down the relation between the canonical definition of the free energy based on summation over the modes and the covariant definition given in Euclidean quantum gravity. As an application, high-temperature asymptotics of the free energy and of the thermal part of the stress-energy tensor in the presence of rotation are derived. We also discuss statistical mechanics in the presence of Killing horizons where canonical and Euclidean theories are related in a non-trivial way
Probabilistic cellular automata: Some statistical mechanical considerations
International Nuclear Information System (INIS)
Lebowitz, J.L.; Maes, C.; Speer, E.R.
1990-01-01
Spin systems evolving in continuous or discrete time under the action of stochastic dynamics are used to model phenomena as diverse as the structure of alloys and the functioning of neural networks. While in some cases the dynamics are secondary, designed to produce a specific stationary measure whose properties one is interested in studying, there are other cases in which the only available information is the dynamical rule. Prime examples of the former are computer simulations, via Glauber dynamics, of equilibrium Gibbs measures with a specified interaction potential. Examples of the latter include various types of majority rule dynamics used as models for pattern recognition and for error-tolerant computations. The present note discusses ways in which techniques found useful in equilibrium statistical mechanics can be applied to a particular class of models of the latter types. These are cellular automata with noise: systems in which the spins are updated stochastically at integer times, simultaneously at all sites of some regular lattice. These models were first investigated in detail in the Soviet literature of the late sixties and early seventies. They are now generally referred to as Stochastic or Probabilistic Cellular Automata (PCA), and may be considered to include deterministic automata (CA) as special limits. 16 refs., 3 figs
A statistical mechanical model of economics
Lubbers, Nicholas Edward Williams
Statistical mechanics pursues low-dimensional descriptions of systems with a very large number of degrees of freedom. I explore this theme in two contexts. The main body of this dissertation explores and extends the Yard Sale Model (YSM) of economic transactions using a combination of simulations and theory. The YSM is a simple interacting model for wealth distributions which has the potential to explain the empirical observation of Pareto distributions of wealth. I develop the link between wealth condensation and the breakdown of ergodicity due to nonlinear diffusion effects which are analogous to the geometric random walk. Using this, I develop a deterministic effective theory of wealth transfer in the YSM that is useful for explaining many quantitative results. I introduce various forms of growth to the model, paying attention to the effect of growth on wealth condensation, inequality, and ergodicity. Arithmetic growth is found to partially break condensation, and geometric growth is found to completely break condensation. Further generalizations of geometric growth with growth in- equality show that the system is divided into two phases by a tipping point in the inequality parameter. The tipping point marks the line between systems which are ergodic and systems which exhibit wealth condensation. I explore generalizations of the YSM transaction scheme to arbitrary betting functions to develop notions of universality in YSM-like models. I find that wealth vi condensation is universal to a large class of models which can be divided into two phases. The first exhibits slow, power-law condensation dynamics, and the second exhibits fast, finite-time condensation dynamics. I find that the YSM, which exhibits exponential dynamics, is the critical, self-similar model which marks the dividing line between the two phases. The final chapter develops a low-dimensional approach to materials microstructure quantification. Modern materials design harnesses complex
Statistical Analysis of Protein Ensembles
Máté, Gabriell; Heermann, Dieter
2014-04-01
As 3D protein-configuration data is piling up, there is an ever-increasing need for well-defined, mathematically rigorous analysis approaches, especially that the vast majority of the currently available methods rely heavily on heuristics. We propose an analysis framework which stems from topology, the field of mathematics which studies properties preserved under continuous deformations. First, we calculate a barcode representation of the molecules employing computational topology algorithms. Bars in this barcode represent different topological features. Molecules are compared through their barcodes by statistically determining the difference in the set of their topological features. As a proof-of-principle application, we analyze a dataset compiled of ensembles of different proteins, obtained from the Ensemble Protein Database. We demonstrate that our approach correctly detects the different protein groupings.
Statistical data analysis using SAS intermediate statistical methods
Marasinghe, Mervyn G
2018-01-01
The aim of this textbook (previously titled SAS for Data Analytics) is to teach the use of SAS for statistical analysis of data for advanced undergraduate and graduate students in statistics, data science, and disciplines involving analyzing data. The book begins with an introduction beyond the basics of SAS, illustrated with non-trivial, real-world, worked examples. It proceeds to SAS programming and applications, SAS graphics, statistical analysis of regression models, analysis of variance models, analysis of variance with random and mixed effects models, and then takes the discussion beyond regression and analysis of variance to conclude. Pedagogically, the authors introduce theory and methodological basis topic by topic, present a problem as an application, followed by a SAS analysis of the data provided and a discussion of results. The text focuses on applied statistical problems and methods. Key features include: end of chapter exercises, downloadable SAS code and data sets, and advanced material suitab...
A statistical mechanics approach to Granovetter theory
Barra, Adriano; Agliari, Elena
2012-05-01
In this paper we try to bridge breakthroughs in quantitative sociology/econometrics, pioneered during the last decades by Mac Fadden, Brock-Durlauf, Granovetter and Watts-Strogatz, by introducing a minimal model able to reproduce essentially all the features of social behavior highlighted by these authors. Our model relies on a pairwise Hamiltonian for decision-maker interactions which naturally extends the multi-populations approaches by shifting and biasing the pattern definitions of a Hopfield model of neural networks. Once introduced, the model is investigated through graph theory (to recover Granovetter and Watts-Strogatz results) and statistical mechanics (to recover Mac-Fadden and Brock-Durlauf results). Due to the internal symmetries of our model, the latter is obtained as the relaxation of a proper Markov process, allowing even to study its out-of-equilibrium properties. The method used to solve its equilibrium is an adaptation of the Hamilton-Jacobi technique recently introduced by Guerra in the spin-glass scenario and the picture obtained is the following: shifting the patterns from [-1,+1]→[0.+1] implies that the larger the amount of similarities among decision makers, the stronger their relative influence, and this is enough to explain both the different role of strong and weak ties in the social network as well as its small-world properties. As a result, imitative interaction strengths seem essentially a robust request (enough to break the gauge symmetry in the couplings), furthermore, this naturally leads to a discrete choice modelization when dealing with the external influences and to imitative behavior à la Curie-Weiss as the one introduced by Brock and Durlauf.
Statistical Mechanics and Applications in Condensed Matter
Di Castro, Carlo; Raimondi, Roberto
2015-08-01
Preface; 1. Thermodynamics: a brief overview; 2. Kinetics; 3. From Boltzmann to Gibbs; 4. More ensembles; 5. The thermodynamic limit and its thermodynamic stability; 6. Density matrix and quantum statistical mechanics; 7. The quantum gases; 8. Mean-field theories and critical phenomena; 9. Second quantization and Hartree-Fock approximation; 10. Linear response and fluctuation-dissipation theorem in quantum systems: equilibrium and small deviations; 11. Brownian motion and transport in disordered systems; 12. Fermi liquids; 13. The Landau theory of the second order phase transitions; 14. The Landau-Wilson model for critical phenomena; 15. Superfluidity and superconductivity; 16. The scaling theory; 17. The renormalization group approach; 18. Thermal Green functions; 19. The microscopic foundations of Fermi liquids; 20. The Luttinger liquid; 21. Quantum interference effects in disordered electron systems; Appendix A. The central limit theorem; Appendix B. Some useful properties of the Euler Gamma function; Appendix C. Proof of the second theorem of Yang and Lee; Appendix D. The most probable distribution for the quantum gases; Appendix E. Fermi-Dirac and Bose-Einstein integrals; Appendix F. The Fermi gas in a uniform magnetic field: Landau diamagnetism; Appendix G. Ising and gas-lattice models; Appendix H. Sum over discrete Matsubara frequencies; Appendix I. Hydrodynamics of the two-fluid model of superfluidity; Appendix J. The Cooper problem in the theory of superconductivity; Appendix K. Superconductive fluctuations phenomena; Appendix L. Diagrammatic aspects of the exact solution of the Tomonaga Luttinger model; Appendix M. Details on the theory of the disordered Fermi liquid; References; Author index; Index.
Imaging mass spectrometry statistical analysis.
Jones, Emrys A; Deininger, Sören-Oliver; Hogendoorn, Pancras C W; Deelder, André M; McDonnell, Liam A
2012-08-30
Imaging mass spectrometry is increasingly used to identify new candidate biomarkers. This clinical application of imaging mass spectrometry is highly multidisciplinary: expertise in mass spectrometry is necessary to acquire high quality data, histology is required to accurately label the origin of each pixel's mass spectrum, disease biology is necessary to understand the potential meaning of the imaging mass spectrometry results, and statistics to assess the confidence of any findings. Imaging mass spectrometry data analysis is further complicated because of the unique nature of the data (within the mass spectrometry field); several of the assumptions implicit in the analysis of LC-MS/profiling datasets are not applicable to imaging. The very large size of imaging datasets and the reporting of many data analysis routines, combined with inadequate training and accessible reviews, have exacerbated this problem. In this paper we provide an accessible review of the nature of imaging data and the different strategies by which the data may be analyzed. Particular attention is paid to the assumptions of the data analysis routines to ensure that the reader is apprised of their correct usage in imaging mass spectrometry research. Copyright © 2012 Elsevier B.V. All rights reserved.
International Nuclear Information System (INIS)
Procaccia, H.; Brillon, A.; Cravero, M.; Lucenet, G.
1975-01-01
The investigation and research directorate of EDF has undertaken a statistical analysis of the behaviour of large mechanical equipment at conventional power stations during the ten years following the operating reports of these stations. It has thus been possible to determine the intrinsic reliability, the failure rate, the mean repair time, and the mean good operating time of feed water reheating points, power turbines, pumps and boilers of the various EDF plants (125 and 250 MW) leading to a consideration of the feasibility of an extrapolation to present and future plants. Based on these elementary investigation two methods of calculation have been developed. One is used to assess the overall availability of a thermal or nuclear power station based on the knowledge of the failure rates of the equipment, each piece of equipment being associated with an idea of its technical importance in the functioning of the equipment. A numerical application is given for 125 and 250 MW conventional plants. The purpose of the other method is to estimate the operational safety of the safety equipment of nuclear power stations, based on the development of tree diagrams for faults in basic equipment. A numerical example is given for the cooling systems for Phenix and for one of the Super Phenix versions. (author)
Boivie, Patrik; Edström, Cecilia; Engström, Karl Gunnar
2005-03-01
Aortic manipulation and particle embolization have been identified to cause cerebrovascular accidents in cardiac surgery. Recent data suggest that left-hemispheric cerebrovascular accident (right-sided symptoms) is more common, and this has been interpreted as being caused by aortic cannula stream jets. Our aim was to evaluate symptoms of cerebrovascular accident and side differences from a retrospective statistical analysis. During a 2-year period, 2641 consecutive cardiac surgery cases were analyzed. Patients positive for cerebrovascular accident were extracted from a database designed to monitor clinical symptoms. A protocol was used to confirm symptom data with the correct diagnosis in patient records. Patients were subdivided into 3 groups: control, immediate cerebrovascular accident, and delayed cerebrovascular accident. Among pooled patients, immediate and delayed cerebrovascular accidents were 3.0% and 0.9%, respectively. The expected predisposing factors behind immediate cerebrovascular accidents were significant, although the type of operation affected this search. Aortic quality was a strong predictor ( P cerebrovascular accident was unaffected by surgery group. Left-sided symptoms of immediate cerebrovascular accident were approximately twice as frequent ( P = .016) as on the contralateral side. This phenomenon was observed for pooled patients and for isolated coronary bypass procedures (n = 1882; P = .025). Immediate cerebrovascular accident and aortic calcifications are linked. The predominance of left-sided symptoms may suggest that aortic manipulation and anatomic mechanisms in the aortic arch are more likely to cause cerebrovascular accidents than effects from cannula stream jets.
Parametric statistical change point analysis
Chen, Jie
2000-01-01
This work is an in-depth study of the change point problem from a general point of view and a further examination of change point analysis of the most commonly used statistical models Change point problems are encountered in such disciplines as economics, finance, medicine, psychology, signal processing, and geology, to mention only several The exposition is clear and systematic, with a great deal of introductory material included Different models are presented in each chapter, including gamma and exponential models, rarely examined thus far in the literature Other models covered in detail are the multivariate normal, univariate normal, regression, and discrete models Extensive examples throughout the text emphasize key concepts and different methodologies are used, namely the likelihood ratio criterion, and the Bayesian and information criterion approaches A comprehensive bibliography and two indices complete the study
Statistical Analysis of Big Data on Pharmacogenomics
Fan, Jianqing; Liu, Han
2013-01-01
This paper discusses statistical methods for estimating complex correlation structure from large pharmacogenomic datasets. We selectively review several prominent statistical methods for estimating large covariance matrix for understanding correlation structure, inverse covariance matrix for network modeling, large-scale simultaneous tests for selecting significantly differently expressed genes and proteins and genetic markers for complex diseases, and high dimensional variable selection for identifying important molecules for understanding molecule mechanisms in pharmacogenomics. Their applications to gene network estimation and biomarker selection are used to illustrate the methodological power. Several new challenges of Big data analysis, including complex data distribution, missing data, measurement error, spurious correlation, endogeneity, and the need for robust statistical methods, are also discussed. PMID:23602905
Statistical Mechanics of Temporal and Interacting Networks
Zhao, Kun
In the last ten years important breakthroughs in the understanding of the topology of complexity have been made in the framework of network science. Indeed it has been found that many networks belong to the universality classes called small-world networks or scale-free networks. Moreover it was found that the complex architecture of real world networks strongly affects the critical phenomena defined on these structures. Nevertheless the main focus of the research has been the characterization of single and static networks. Recently, temporal networks and interacting networks have attracted large interest. Indeed many networks are interacting or formed by a multilayer structure. Example of these networks are found in social networks where an individual might be at the same time part of different social networks, in economic and financial networks, in physiology or in infrastructure systems. Moreover, many networks are temporal, i.e. the links appear and disappear on the fast time scale. Examples of these networks are social networks of contacts such as face-to-face interactions or mobile-phone communication, the time-dependent correlations in the brain activity and etc. Understanding the evolution of temporal and multilayer networks and characterizing critical phenomena in these systems is crucial if we want to describe, predict and control the dynamics of complex system. In this thesis, we investigate several statistical mechanics models of temporal and interacting networks, to shed light on the dynamics of this new generation of complex networks. First, we investigate a model of temporal social networks aimed at characterizing human social interactions such as face-to-face interactions and phone-call communication. Indeed thanks to the availability of data on these interactions, we are now in the position to compare the proposed model to the real data finding good agreement. Second, we investigate the entropy of temporal networks and growing networks , to provide
Statistical fracture mechanics approach to the strength of brittle rock
International Nuclear Information System (INIS)
Ratigan, J.L.
1981-06-01
Statistical fracture mechanics concepts used in the past for rock are critically reviewed and modifications are proposed which are warranted by (1) increased understanding of fracture provided by modern fracture mechanics and (2) laboratory test data both from the literature and from this research. Over 600 direct and indirect tension tests have been performed on three different rock types; Stripa Granite, Sierra White Granite and Carrara Marble. In several instances assumptions which are common in the literature were found to be invalid. A three parameter statistical fracture mechanics model with Mode I critical strain energy release rate as the variant is presented. Methodologies for evaluating the parameters in this model as well as the more commonly employed two parameter models are discussed. The experimental results and analysis of this research indicate that surfacially distributed flaws, rather than volumetrically distributed flaws are responsible for rupture in many testing situations. For several of the rock types tested, anisotropy (both in apparent tensile strength and size effect) precludes the use of contemporary statistical fracture mechanics models
The scientifiv way of thinking in statistics, statistical physics and quantum mechanics
Săvoiu, Gheorghe
2008-01-01
This paper focuses on the way of thinking in both classical and modern Physics and Statistics, Statistical Mechanics or Statistical Physics and Quantum Mechanics. These different statistical ways of thinking and their specific methods have generated new fields for new activities and new scientific disciplines, like Econophysics (between Economics and Physics), Sociophysics (between Sociology and Physics), Mediaphysics (between all media and comunication sciences), etc. After describing some r...
The scientific way of thinking in statistics, statistical physics and quantum mechanics
Săvoiu, Gheorghe
2008-01-01
This paper focuses on the way of thinking in both classical and modern Physics and Statistics, Statistical Mechanics or Statistical Physics and Quantum Mechanics. These different statistical ways of thinking and their specific methods have generated new fields for new activities and new scientific disciplines, like Econophysics (between Economics and Physics), Sociophysics (between Sociology and Physics), Mediaphysics (between all media and comunication sciences), etc. After describing some r...
The statistical mechanics of financial markets
Voit, Johannes
2003-01-01
From the reviews of the first edition - "Provides an excellent introduction for physicists interested in the statistical properties of financial markets. Appropriately early in the book the basic financial terms such as shorts, limit orders, puts, calls, and other terms are clearly defined. Examples, often with graphs, augment the reader’s understanding of what may be a plethora of new terms and ideas… [This is] an excellent starting point for the physicist interested in the subject. Some of the book’s strongest features are its careful definitions, its detailed examples, and the connection it establishes to physical systems." PHYSICS TODAY "This book is excellent at illustrating the similarities of financial markets with other non-equilibrium physical systems. [...] In summary, a very good book that offers more than just qualitative comparisons of physics and finance." (www.quantnotes.com) This highly-praised introductory treatment describes parallels between statistical physics and finance - both thos...
Statistical analysis of brake squeal noise
Oberst, S.; Lai, J. C. S.
2011-06-01
Despite substantial research efforts applied to the prediction of brake squeal noise since the early 20th century, the mechanisms behind its generation are still not fully understood. Squealing brakes are of significant concern to the automobile industry, mainly because of the costs associated with warranty claims. In order to remedy the problems inherent in designing quieter brakes and, therefore, to understand the mechanisms, a design of experiments study, using a noise dynamometer, was performed by a brake system manufacturer to determine the influence of geometrical parameters (namely, the number and location of slots) of brake pads on brake squeal noise. The experimental results were evaluated with a noise index and ranked for warm and cold brake stops. These data are analysed here using statistical descriptors based on population distributions, and a correlation analysis, to gain greater insight into the functional dependency between the time-averaged friction coefficient as the input and the peak sound pressure level data as the output quantity. The correlation analysis between the time-averaged friction coefficient and peak sound pressure data is performed by applying a semblance analysis and a joint recurrence quantification analysis. Linear measures are compared with complexity measures (nonlinear) based on statistics from the underlying joint recurrence plots. Results show that linear measures cannot be used to rank the noise performance of the four test pad configurations. On the other hand, the ranking of the noise performance of the test pad configurations based on the noise index agrees with that based on nonlinear measures: the higher the nonlinearity between the time-averaged friction coefficient and peak sound pressure, the worse the squeal. These results highlight the nonlinear character of brake squeal and indicate the potential of using nonlinear statistical analysis tools to analyse disc brake squeal.
Statistical mechanics of microscopically thin thermalized shells
Kosmrlj, Andrej
Recent explosion in fabrication of microscopically thin free standing structures made from graphene and other two-dimensional materials has led to a renewed interest in the mechanics of such structures in presence of thermal fluctuations. Since late 1980s it has been known that for flat solid sheets thermal fluctuations effectively increase the bending rigidity and reduce the bulk and shear moduli in a scale-dependent fashion. However, much is still unknown about the mechanics of thermalized flat sheets of complex geometries and about the mechanics of thermalized shells with non-zero background curvature. In this talk I will present recent development in the mechanics of thermalized ribbons, spherical shells and cylindrical tubes. Long ribbons are found to behave like hybrids between flat sheets with renormalized elastic constants and semi-flexible polymers, and these results can be used to predict the mechanics of graphene kirigami structures. Contrary to the anticipated behavior for ribbons, the non-zero background curvature of shells leads to remarkable novel phenomena. In shells, thermal fluctuations effectively generate negative surface tension, which can significantly reduce the critical buckling pressure for spherical shells and the critical axial load for cylindrical tubes. For large shells this thermally generated load becomes big enough to spontaneously crush spherical shells and cylindrical tubes even in the absence of external loads. I will comment on the relevance for crushing of microscopic shells (viral capsids, bacteria, microcapsules) due to osmotic shocks and for crushing of nanotubes.
Statistical analysis and data management
International Nuclear Information System (INIS)
Anon.
1981-01-01
This report provides an overview of the history of the WIPP Biology Program. The recommendations of the American Institute of Biological Sciences (AIBS) for the WIPP biology program are summarized. The data sets available for statistical analyses and problems associated with these data sets are also summarized. Biological studies base maps are presented. A statistical model is presented to evaluate any correlation between climatological data and small mammal captures. No statistically significant relationship between variance in small mammal captures on Dr. Gennaro's 90m x 90m grid and precipitation records from the Duval Potash Mine were found
A statistical mechanical model for equilibrium ionization
International Nuclear Information System (INIS)
Macris, N.; Martin, P.A.; Pule, J.
1990-01-01
A quantum electron interacts with a classical gas of hard spheres and is in thermal equilibrium with it. The interaction is attractive and the electron can form a bound state with the classical particles. It is rigorously shown that in a well defined low density and low temperature limit, the ionization probability for the electron tends to the value predicted by the Saha formula for thermal ionization. In this regime, the electron is found to be in a statistical mixture of a bound and a free state. (orig.)
Statistical analysis of management data
Gatignon, Hubert
2013-01-01
This book offers a comprehensive approach to multivariate statistical analyses. It provides theoretical knowledge of the concepts underlying the most important multivariate techniques and an overview of actual applications.
Statistical mechanics of socio-economic systems with heterogeneous agents
International Nuclear Information System (INIS)
De Martino, Andrea; Marsili, Matteo
2006-01-01
We review the statistical mechanics approach to the study of the emerging collective behaviour of systems of heterogeneous interacting agents. The general framework is presented through examples in such contexts as ecosystem dynamics and traffic modelling. We then focus on the analysis of the optimal properties of large random resource-allocation problems and on Minority Games and related models of speculative trading in financial markets, discussing a number of extensions including multi-asset models, majority games and models with asymmetric information. Finally, we summarize the main conclusions and outline the major open problems and limitations of the approach. (topical review)
Statistical mechanics of human resource allocation
Inoue, Jun-Ichi; Chen, He
2014-03-01
We provide a mathematical platform to investigate the network topology of agents, say, university graduates who are looking for their positions in labor markets. The basic model is described by the so-called Potts spin glass which is well-known in the research field of statistical physics. In the model, each Potts spin (a tiny magnet in atomic scale length) represents the action of each student, and it takes a discrete variable corresponding to the company he/she applies for. We construct the energy to include three distinct effects on the students' behavior, namely, collective effect, market history and international ranking of companies. In this model system, the correlations (the adjacent matrix) between students are taken into account through the pairwise spin-spin interactions. We carry out computer simulations to examine the efficiency of the model. We also show that some chiral representation of the Potts spin enables us to obtain some analytical insights into our labor markets. This work was financially supported by Grant-in-Aid for Scientific Research (C) of Japan Society for the Promotion of Science No. 25330278.
Statistical Mechanics of Japanese Labor Markets
Chen, He
We introduce a probabilistic model to analyze job-matching processes of recent Japanese labor markets, in particular, for university graduates by means of statistical physics. To make a model of the market efficiently, we take into account several hypotheses. Namely, each company fixes the (business year independent) number of opening positions for newcomers. The ability of gathering newcomers depends on the result of job matching process in past business years. This fact means that the ability of the company is weakening if the company did not make their quota or the company gathered applicants too much over the quota. All university graduates who are looking for their jobs can access the public information about the ranking of companies. By assuming the above essential key points, we construct the local energy function of each company and describe the probability that an arbitrary company gets students at each business year by a Boltzmann-Gibbs distribution. We evaluate the relevant physical quantities such as the employment rate and Gini index. We discuss social inequalities in labor markets, and provide some ways to improve these situations, such as the informal job offer rate, the job-worker mismatch between students and companies. Graduate School of Information Science and Technology.
Foundations of statistical mechanics a deductive treatment
Penrose, Oliver
2005-01-01
Starting with primary physical assumptions and their idealization in the form of postulates, this text examines the consequences of these postulates, culminating in the derivation of the fundamental formulas for calculating probabilities in terms of dynamical quantities and concluding with an analysis of the notion of entropy. Solutions. 1970 edition.
Statistical mechanics of a cat's cradle
Shen, Tongye; Wolynes, Peter G.
2006-11-01
It is believed that, much like a cat's cradle, the cytoskeleton can be thought of as a network of strings under tension. We show that both regular and random bond-disordered networks having bonds that buckle upon compression exhibit a variety of phase transitions as a function of temperature and extension. The results of self-consistent phonon calculations for the regular networks agree very well with computer simulations at finite temperature. The analytic theory also yields a rigidity onset (mechanical percolation) and the fraction of extended bonds for random networks. There is very good agreement with the simulations by Delaney et al (2005 Europhys. Lett. 72 990). The mean field theory reveals a nontranslationally invariant phase with self-generated heterogeneity of tautness, representing 'antiferroelasticity'.
Statistical mechanics of error-correcting codes
Kabashima, Y.; Saad, D.
1999-01-01
We investigate the performance of error-correcting codes, where the code word comprises products of K bits selected from the original message and decoding is carried out utilizing a connectivity tensor with C connections per index. Shannon's bound for the channel capacity is recovered for large K and zero temperature when the code rate K/C is finite. Close to optimal error-correcting capability is obtained for finite K and C. We examine the finite-temperature case to assess the use of simulated annealing for decoding and extend the analysis to accommodate other types of noisy channels.
Statistical Mechanics of Thin Spherical Shells
Directory of Open Access Journals (Sweden)
Andrej Košmrlj
2017-01-01
Full Text Available We explore how thermal fluctuations affect the mechanics of thin amorphous spherical shells. In flat membranes with a shear modulus, thermal fluctuations increase the bending rigidity and reduce the in-plane elastic moduli in a scale-dependent fashion. This is still true for spherical shells. However, the additional coupling between the shell curvature, the local in-plane stretching modes, and the local out-of-plane undulations leads to novel phenomena. In spherical shells, thermal fluctuations produce a radius-dependent negative effective surface tension, equivalent to applying an inward external pressure. By adapting renormalization group calculations to allow for a spherical background curvature, we show that while small spherical shells are stable, sufficiently large shells are crushed by this thermally generated “pressure.” Such shells can be stabilized by an outward osmotic pressure, but the effective shell size grows nonlinearly with increasing outward pressure, with the same universal power-law exponent that characterizes the response of fluctuating flat membranes to a uniform tension.
Statistical mechanics of learning orthogonal signals for general covariance models
International Nuclear Information System (INIS)
Hoyle, David C
2010-01-01
Statistical mechanics techniques have proved to be useful tools in quantifying the accuracy with which signal vectors are extracted from experimental data. However, analysis has previously been limited to specific model forms for the population covariance C, which may be inappropriate for real world data sets. In this paper we obtain new statistical mechanical results for a general population covariance matrix C. For data sets consisting of p sample points in R N we use the replica method to study the accuracy of orthogonal signal vectors estimated from the sample data. In the asymptotic limit of N,p→∞ at fixed α = p/N, we derive analytical results for the signal direction learning curves. In the asymptotic limit the learning curves follow a single universal form, each displaying a retarded learning transition. An explicit formula for the location of the retarded learning transition is obtained and we find marked variation in the location of the retarded learning transition dependent on the distribution of population covariance eigenvalues. The results of the replica analysis are confirmed against simulation
A Statistical Analysis of Cryptocurrencies
Directory of Open Access Journals (Sweden)
Stephen Chan
2017-05-01
Full Text Available We analyze statistical properties of the largest cryptocurrencies (determined by market capitalization, of which Bitcoin is the most prominent example. We characterize their exchange rates versus the U.S. Dollar by fitting parametric distributions to them. It is shown that returns are clearly non-normal, however, no single distribution fits well jointly to all the cryptocurrencies analysed. We find that for the most popular currencies, such as Bitcoin and Litecoin, the generalized hyperbolic distribution gives the best fit, while for the smaller cryptocurrencies the normal inverse Gaussian distribution, generalized t distribution, and Laplace distribution give good fits. The results are important for investment and risk management purposes.
Statistical Analysis of Physiological Signals
Ruiz, María G.; Pérez, Leticia
2003-07-01
In spite of two hundred years of clinical practice, Homeopathy still lacks of scientific basis. Its fundamental laws, similia principle and the activity of the denominated ultra-high dilutions are controversial issues that do not fit into the mainstream medicine or current physical-chemistry field as well. Aside its clinical efficacy, the identification of physical - chemistry parameters, as markers of the homeopathic effect, would allow to construct mathematic models [1], which in turn, could provide clues regarding the involved mechanism.
Statistical analysis of RHESSI database
Czech Academy of Sciences Publication Activity Database
Řípa, J.; Hudec, René; Mészáros, A.; Hajdas, W.; Wigger, C.
2006-01-01
Roč. 121, č. 12 (2006), s. 1493-1494 ISSN 1594-9982. [Swift and GRBs: Unveiling the Relativistic Universe. Venice, 05.06.2006-09.06.2006] R&D Projects: GA AV ČR IAA3003206 Institutional research plan: CEZ:AV0Z10030501 Keywords : gamma-rays * gamma-ray bursts Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 0.351, year: 2006
Statistical Power in Meta-Analysis
Liu, Jin
2015-01-01
Statistical power is important in a meta-analysis study, although few studies have examined the performance of simulated power in meta-analysis. The purpose of this study is to inform researchers about statistical power estimation on two sample mean difference test under different situations: (1) the discrepancy between the analytical power and…
International Nuclear Information System (INIS)
Fuse, Norikazu; Kanegami, Masaki; Misaka, Hideki; Homma, Hiroya; Okamoto, Tatsuki
2013-01-01
As for polymeric insulations used in nuclear power plant safety cables, it is known that the present prediction model sometimes estimates the service life conservatively. In order to sophisticate the model to reflect to the aging in containments, disconnections between the prediction and realities are needed to be clarified. In the present paper, statistical analysis has been carried out on various aging status of insulations removed from domestic containments. Aging in operational environment is found to be slower than the one expected from acceleration aging test results. Temperature dependence of estimated lifetime on Arrhenius plot also suggests that elementary chemical reaction dominant under the two aging conditions is different, which results in apparent difference in activation energies and pre-exponential factors. Following two kinds of issues are found necessary to be clarified for the model sophistication; temperature change in predominant degradation chemical processes, and the effect of low oxygen concentration environment in boiling water reactor type containment. (author)
Statistical methods for astronomical data analysis
Chattopadhyay, Asis Kumar
2014-01-01
This book introduces “Astrostatistics” as a subject in its own right with rewarding examples, including work by the authors with galaxy and Gamma Ray Burst data to engage the reader. This includes a comprehensive blending of Astrophysics and Statistics. The first chapter’s coverage of preliminary concepts and terminologies for astronomical phenomenon will appeal to both Statistics and Astrophysics readers as helpful context. Statistics concepts covered in the book provide a methodological framework. A unique feature is the inclusion of different possible sources of astronomical data, as well as software packages for converting the raw data into appropriate forms for data analysis. Readers can then use the appropriate statistical packages for their particular data analysis needs. The ideas of statistical inference discussed in the book help readers determine how to apply statistical tests. The authors cover different applications of statistical techniques already developed or specifically introduced for ...
A statistical mechanical approach to restricted integer partition functions
Zhou, Chi-Chun; Dai, Wu-Sheng
2018-05-01
The main aim of this paper is twofold: (1) suggesting a statistical mechanical approach to the calculation of the generating function of restricted integer partition functions which count the number of partitions—a way of writing an integer as a sum of other integers under certain restrictions. In this approach, the generating function of restricted integer partition functions is constructed from the canonical partition functions of various quantum gases. (2) Introducing a new type of restricted integer partition functions corresponding to general statistics which is a generalization of Gentile statistics in statistical mechanics; many kinds of restricted integer partition functions are special cases of this restricted integer partition function. Moreover, with statistical mechanics as a bridge, we reveal a mathematical fact: the generating function of restricted integer partition function is just the symmetric function which is a class of functions being invariant under the action of permutation groups. Using this approach, we provide some expressions of restricted integer partition functions as examples.
Statistical analysis with Excel for dummies
Schmuller, Joseph
2013-01-01
Take the mystery out of statistical terms and put Excel to work! If you need to create and interpret statistics in business or classroom settings, this easy-to-use guide is just what you need. It shows you how to use Excel's powerful tools for statistical analysis, even if you've never taken a course in statistics. Learn the meaning of terms like mean and median, margin of error, standard deviation, and permutations, and discover how to interpret the statistics of everyday life. You'll learn to use Excel formulas, charts, PivotTables, and other tools to make sense of everything fro
Statistical mechanics for a system with imperfections: pt. 1
International Nuclear Information System (INIS)
Choh, S.T.; Kahng, W.H.; Um, C.I.
1982-01-01
Statistical mechanics is extended to treat a system where parts of the Hamiltonian are randomly varying. As the starting point of the theory, the statistical correlation among energy levels is neglected, allowing use of the central limit theorem of the probability theory. (Author)
Collecting operational event data for statistical analysis
International Nuclear Information System (INIS)
Atwood, C.L.
1994-09-01
This report gives guidance for collecting operational data to be used for statistical analysis, especially analysis of event counts. It discusses how to define the purpose of the study, the unit (system, component, etc.) to be studied, events to be counted, and demand or exposure time. Examples are given of classification systems for events in the data sources. A checklist summarizes the essential steps in data collection for statistical analysis
Statistical mechanics of the fashion game on random networks
International Nuclear Information System (INIS)
Sun, YiFan
2016-01-01
A model of fashion on networks is studied. This model consists of two groups of agents that are located on a network and have opposite viewpoints towards being fashionable: behaving consistently with either the majority or the minority of adjacent agents. Checking whether the fashion game has a pure Nash equilibrium (pure NE) is a non-deterministic polynomial complete problem. Using replica-symmetric mean field theory, the largest proportion of satisfied agents and the region where at least one pure NE should exist are determined for several types of random networks. Furthermore, a quantitive analysis of the asynchronous best response dynamics yields the phase diagram of existence and detectability of pure NE in the fashion game on some random networks. (paper: classical statistical mechanics, equilibrium and non-equilibrium).
Statistical mechanics of sparse generalization and graphical model selection
International Nuclear Information System (INIS)
Lage-Castellanos, Alejandro; Pagnani, Andrea; Weigt, Martin
2009-01-01
One of the crucial tasks in many inference problems is the extraction of an underlying sparse graphical model from a given number of high-dimensional measurements. In machine learning, this is frequently achieved using, as a penalty term, the L p norm of the model parameters, with p≤1 for efficient dilution. Here we propose a statistical mechanics analysis of the problem in the setting of perceptron memorization and generalization. Using a replica approach, we are able to evaluate the relative performance of naive dilution (obtained by learning without dilution, following by applying a threshold to the model parameters), L 1 dilution (which is frequently used in convex optimization) and L 0 dilution (which is optimal but computationally hard to implement). Whereas both L p diluted approaches clearly outperform the naive approach, we find a small region where L 0 works almost perfectly and strongly outperforms the simpler to implement L 1 dilution
Quantum mechanics and field theory with fractional spin and statistics
International Nuclear Information System (INIS)
Forte, S.
1992-01-01
Planar systems admit quantum states that are neither bosons nor fermions, i.e., whose angular momentum is neither integer nor half-integer. After a discussion of some examples of familiar models in which fractional spin may arise, the relevant (nonrelativistic) quantum mechanics is developed from first principles. The appropriate generalization of statistics is also discussed. Some physical effects of fractional spin and statistics are worked out explicitly. The group theory underlying relativistic models with fractional spin and statistics is then introduced and applied to relativistic particle mechanics and field theory. Field-theoretical models in 2+1 dimensions are presented which admit solitons that carry fractional statistics, and are discussed in a semiclassical approach, in the functional integral approach, and in the canonical approach. Finally, fundamental field theories whose Fock states carry fractional spin and statistics are discussed
Statistical-mechanical entropy by the thin-layer method
International Nuclear Information System (INIS)
Feng, He; Kim, Sung Won
2003-01-01
G. Hooft first studied the statistical-mechanical entropy of a scalar field in a Schwarzschild black hole background by the brick-wall method and hinted that the statistical-mechanical entropy is the statistical origin of the Bekenstein-Hawking entropy of the black hole. However, according to our viewpoint, the statistical-mechanical entropy is only a quantum correction to the Bekenstein-Hawking entropy of the black-hole. The brick-wall method based on thermal equilibrium at a large scale cannot be applied to the cases out of equilibrium such as a nonstationary black hole. The statistical-mechanical entropy of a scalar field in a nonstationary black hole background is calculated by the thin-layer method. The condition of local equilibrium near the horizon of the black hole is used as a working postulate and is maintained for a black hole which evaporates slowly enough and whose mass is far greater than the Planck mass. The statistical-mechanical entropy is also proportional to the area of the black hole horizon. The difference from the stationary black hole is that the result relies on a time-dependent cutoff
Fracture mechanics and statistical mechanics of reinforced elastomeric blends
Heinrich, Gert; Kaliske, Michael; Klüppel, Manfred; Schneider, Konrad; Vilgis, Thomas
2013-01-01
Elastomers are found in many applications ranging from technology to daily life applications for example in tires, drive systems, sealings and print rollers. Dynamical operation conditions put extremely high demands on the performance and stability of these materials and their elastic and flow properties can be easily adjusted by simple manipulations on their elastic and viscous properties. However, the required service life suffers often from material damage as a result of wear processes such as abrasion and wear fatigue, mostly caused by crack formation and propagation. This book covers interdisciplinary research between physics, physical chemistry, material sciences and engineering of elastomers within the range from nanometres to millimetres and connects these aspects with the constitutive material properties. The different chapters describe reliable lifetime and durability predictions based on new fracture mechanical testing concepts and advanced material-theoretical methods which are finally implemented...
Explorations in Statistics: The Analysis of Change
Curran-Everett, Douglas; Williams, Calvin L.
2015-01-01
Learning about statistics is a lot like learning about science: the learning is more meaningful if you can actively explore. This tenth installment of "Explorations in Statistics" explores the analysis of a potential change in some physiological response. As researchers, we often express absolute change as percent change so we can…
Statistical shape analysis with applications in R
Dryden, Ian L
2016-01-01
A thoroughly revised and updated edition of this introduction to modern statistical methods for shape analysis Shape analysis is an important tool in the many disciplines where objects are compared using geometrical features. Examples include comparing brain shape in schizophrenia; investigating protein molecules in bioinformatics; and describing growth of organisms in biology. This book is a significant update of the highly-regarded `Statistical Shape Analysis’ by the same authors. The new edition lays the foundations of landmark shape analysis, including geometrical concepts and statistical techniques, and extends to include analysis of curves, surfaces, images and other types of object data. Key definitions and concepts are discussed throughout, and the relative merits of different approaches are presented. The authors have included substantial new material on recent statistical developments and offer numerous examples throughout the text. Concepts are introduced in an accessible manner, while reta...
Spatial analysis statistics, visualization, and computational methods
Oyana, Tonny J
2015-01-01
An introductory text for the next generation of geospatial analysts and data scientists, Spatial Analysis: Statistics, Visualization, and Computational Methods focuses on the fundamentals of spatial analysis using traditional, contemporary, and computational methods. Outlining both non-spatial and spatial statistical concepts, the authors present practical applications of geospatial data tools, techniques, and strategies in geographic studies. They offer a problem-based learning (PBL) approach to spatial analysis-containing hands-on problem-sets that can be worked out in MS Excel or ArcGIS-as well as detailed illustrations and numerous case studies. The book enables readers to: Identify types and characterize non-spatial and spatial data Demonstrate their competence to explore, visualize, summarize, analyze, optimize, and clearly present statistical data and results Construct testable hypotheses that require inferential statistical analysis Process spatial data, extract explanatory variables, conduct statisti...
Advances in statistical models for data analysis
Minerva, Tommaso; Vichi, Maurizio
2015-01-01
This edited volume focuses on recent research results in classification, multivariate statistics and machine learning and highlights advances in statistical models for data analysis. The volume provides both methodological developments and contributions to a wide range of application areas such as economics, marketing, education, social sciences and environment. The papers in this volume were first presented at the 9th biannual meeting of the Classification and Data Analysis Group (CLADAG) of the Italian Statistical Society, held in September 2013 at the University of Modena and Reggio Emilia, Italy.
Brief introduction to Lie-admissible formulations in statistical mechanics
International Nuclear Information System (INIS)
Fronteau, J.
1981-01-01
The present article is a summary of the essential ideas and results published in previous articles, the aim here being to describe the situation in a schematic way for the benefit of non-specialists. The non-truncated Liouville theorem and equation, natural introduction of Lie-admissible formulations into statistical mechanics, the notion of a statistical quasi-particle, and transition towards the notion of fine thermodynamics are discussed
The road to Maxwell's demon conceptual foundations of statistical mechanics
Hemmo, Meir
2012-01-01
Time asymmetric phenomena are successfully predicted by statistical mechanics. Yet the foundations of this theory are surprisingly shaky. Its explanation for the ease of mixing milk with coffee is incomplete, and even implies that un-mixing them should be just as easy. In this book the authors develop a new conceptual foundation for statistical mechanics that addresses this difficulty. Explaining the notions of macrostates, probability, measurement, memory, and the arrow of time in statistical mechanics, they reach the startling conclusion that Maxwell's Demon, the famous perpetuum mobile, is consistent with the fundamental physical laws. Mathematical treatments are avoided where possible, and instead the authors use novel diagrams to illustrate the text. This is a fascinating book for graduate students and researchers interested in the foundations and philosophy of physics.
Limiting processes in non-equilibrium classical statistical mechanics
International Nuclear Information System (INIS)
Jancel, R.
1983-01-01
After a recall of the basic principles of the statistical mechanics, the results of ergodic theory, the transient at the thermodynamic limit and his link with the transport theory near the equilibrium are analyzed. The fundamental problems put by the description of non-equilibrium macroscopic systems are investigated and the kinetic methods are stated. The problems of the non-equilibrium statistical mechanics are analyzed: irreversibility and coarse-graining, macroscopic variables and kinetic description, autonomous reduced descriptions, limit processes, BBGKY hierarchy, limit theorems [fr
Classification, (big) data analysis and statistical learning
Conversano, Claudio; Vichi, Maurizio
2018-01-01
This edited book focuses on the latest developments in classification, statistical learning, data analysis and related areas of data science, including statistical analysis of large datasets, big data analytics, time series clustering, integration of data from different sources, as well as social networks. It covers both methodological aspects as well as applications to a wide range of areas such as economics, marketing, education, social sciences, medicine, environmental sciences and the pharmaceutical industry. In addition, it describes the basic features of the software behind the data analysis results, and provides links to the corresponding codes and data sets where necessary. This book is intended for researchers and practitioners who are interested in the latest developments and applications in the field. The peer-reviewed contributions were presented at the 10th Scientific Meeting of the Classification and Data Analysis Group (CLADAG) of the Italian Statistical Society, held in Santa Margherita di Pul...
Statistical hot spot analysis of reactor cores
International Nuclear Information System (INIS)
Schaefer, H.
1974-05-01
This report is an introduction into statistical hot spot analysis. After the definition of the term 'hot spot' a statistical analysis is outlined. The mathematical method is presented, especially the formula concerning the probability of no hot spots in a reactor core is evaluated. A discussion with the boundary conditions of a statistical hot spot analysis is given (technological limits, nominal situation, uncertainties). The application of the hot spot analysis to the linear power of pellets and the temperature rise in cooling channels is demonstrated with respect to the test zone of KNK II. Basic values, such as probability of no hot spots, hot spot potential, expected hot spot diagram and cumulative distribution function of hot spots, are discussed. It is shown, that the risk of hot channels can be dispersed equally over all subassemblies by an adequate choice of the nominal temperature distribution in the core
Statistics and analysis of scientific data
Bonamente, Massimiliano
2013-01-01
Statistics and Analysis of Scientific Data covers the foundations of probability theory and statistics, and a number of numerical and analytical methods that are essential for the present-day analyst of scientific data. Topics covered include probability theory, distribution functions of statistics, fits to two-dimensional datasheets and parameter estimation, Monte Carlo methods and Markov chains. Equal attention is paid to the theory and its practical application, and results from classic experiments in various fields are used to illustrate the importance of statistics in the analysis of scientific data. The main pedagogical method is a theory-then-application approach, where emphasis is placed first on a sound understanding of the underlying theory of a topic, which becomes the basis for an efficient and proactive use of the material for practical applications. The level is appropriate for undergraduates and beginning graduate students, and as a reference for the experienced researcher. Basic calculus is us...
Rweb:Web-based Statistical Analysis
Directory of Open Access Journals (Sweden)
Jeff Banfield
1999-03-01
Full Text Available Rweb is a freely accessible statistical analysis environment that is delivered through the World Wide Web (WWW. It is based on R, a well known statistical analysis package. The only requirement to run the basic Rweb interface is a WWW browser that supports forms. If you want graphical output you must, of course, have a browser that supports graphics. The interface provides access to WWW accessible data sets, so you may run Rweb on your own data. Rweb can provide a four window statistical computing environment (code input, text output, graphical output, and error information through browsers that support Javascript. There is also a set of point and click modules under development for use in introductory statistics courses.
Statistical physics of black holes as quantum-mechanical systems
Giddings, Steven B.
2013-01-01
Some basic features of black-hole statistical mechanics are investigated, assuming that black holes respect the principles of quantum mechanics. Care is needed in defining an entropy S_bh corresponding to the number of microstates of a black hole, given that the black hole interacts with its surroundings. An open question is then the relationship between this entropy and the Bekenstein-Hawking entropy S_BH. For a wide class of models with interactions needed to ensure unitary quantum evolutio...
A statistical mechanics approach to mixing in stratified fluids
Venaille , Antoine; Gostiaux , Louis; Sommeria , Joël
2016-01-01
Accepted for the Journal of Fluid Mechanics; Predicting how much mixing occurs when a given amount of energy is injected into a Boussinesq fluid is a longstanding problem in stratified turbulence. The huge number of degrees of freedom involved in these processes renders extremely difficult a deterministic approach to the problem. Here we present a statistical mechanics approach yielding a prediction for a cumulative, global mixing efficiency as a function of a global Richard-son number and th...
Molecular dynamics and Monte Carlo calculations in statistical mechanics
International Nuclear Information System (INIS)
Wood, W.W.; Erpenbeck, J.J.
1976-01-01
Monte Carlo and molecular dynamics calculations on statistical mechanical systems is reviewed giving some of the more significant recent developments. It is noted that the term molecular dynamics refers to the time-averaging technique for hard-core and square-well interactions and for continuous force-law interactions. Ergodic questions, methodology, quantum mechanical, Lorentz, and one-dimensional, hard-core, and square and triangular-well systems, short-range soft potentials, and other systems are included. 268 references
A statistical approach to plasma profile analysis
International Nuclear Information System (INIS)
Kardaun, O.J.W.F.; McCarthy, P.J.; Lackner, K.; Riedel, K.S.
1990-05-01
A general statistical approach to the parameterisation and analysis of tokamak profiles is presented. The modelling of the profile dependence on both the radius and the plasma parameters is discussed, and pertinent, classical as well as robust, methods of estimation are reviewed. Special attention is given to statistical tests for discriminating between the various models, and to the construction of confidence intervals for the parameterised profiles and the associated global quantities. The statistical approach is shown to provide a rigorous approach to the empirical testing of plasma profile invariance. (orig.)
Reproducible statistical analysis with multiple languages
DEFF Research Database (Denmark)
Lenth, Russell; Højsgaard, Søren
2011-01-01
This paper describes the system for making reproducible statistical analyses. differs from other systems for reproducible analysis in several ways. The two main differences are: (1) Several statistics programs can be in used in the same document. (2) Documents can be prepared using OpenOffice or ......Office or \\LaTeX. The main part of this paper is an example showing how to use and together in an OpenOffice text document. The paper also contains some practical considerations on the use of literate programming in statistics....
Foundation of statistical energy analysis in vibroacoustics
Le Bot, A
2015-01-01
This title deals with the statistical theory of sound and vibration. The foundation of statistical energy analysis is presented in great detail. In the modal approach, an introduction to random vibration with application to complex systems having a large number of modes is provided. For the wave approach, the phenomena of propagation, group speed, and energy transport are extensively discussed. Particular emphasis is given to the emergence of diffuse field, the central concept of the theory.
SRB states and nonequilibrium statistical mechanics close to equilibrium
Gallavotti, Giovannni; Ruelle, David
1996-01-01
Nonequilibrium statistical mechanics close to equilibrium is studied using SRB states and a formula for their derivatives with respect to parameters. We write general expressions for the thermodynamic fluxes (or currents) and the transport coefficients, generalizing previous results. In this framework we give a general proof of the Onsager reciprocity relations.
Two-dimensional models in statistical mechanics and field theory
International Nuclear Information System (INIS)
Koberle, R.
1980-01-01
Several features of two-dimensional models in statistical mechanics and Field theory, such as, lattice quantum chromodynamics, Z(N), Gross-Neveu and CP N-1 are discussed. The problems of confinement and dynamical mass generation are also analyzed. (L.C.) [pt
Mathematics of statistical mechanics and the chaos theory
International Nuclear Information System (INIS)
Llave, R. de la; Haro, A.
2000-01-01
Statistical mechanics requires a language that unifies probabilistic and deterministic description of physical systems. We describe briefly some of the mathematical ideas needed for this unification. These ideas have also proved important in the study of chaotic systems. (Author) 17 refs
Braid group, knot theory and statistical mechanics II
Yang Chen Ning
1994-01-01
The present volume is an updated version of the book edited by C N Yang and M L Ge on the topics of braid groups and knot theory, which are related to statistical mechanics. This book is based on the 1989 volume but has new material included and new contributors.
Statistical mechanics and the evolution of polygenic quantitative traits
Barton, N.H.; De Vladar, H.P.
The evolution of quantitative characters depends on the frequencies of the alleles involved, yet these frequencies cannot usually be measured. Previous groups have proposed an approximation to the dynamics of quantitative traits, based on an analogy with statistical mechanics. We present a modified
Grassmann methods in lattice field theory and statistical mechanics
International Nuclear Information System (INIS)
Bilgici, E.; Gattringer, C.; Huber, P.
2006-01-01
Full text: In two dimensions models of loops can be represented as simple Grassmann integrals. In our work we explore the generalization of these techniques to lattice field theories and statistical mechanic systems in three and four dimensions. We discuss possible strategies and applications for representations of loop and surface models as Grassmann integrals. (author)
Geometry and topology in hamiltonian dynamics and statistical mechanics
Pettini, Marco
2007-01-01
Explores the foundations of hamiltonian dynamical systems and statistical mechanics, in particular phase transitions, from the point of view of geometry and topology. This book provides an overview of the research in the area. Using geometrical thinking to solve fundamental problems in these areas could be highly productive
Statistical mechanics in the context of special relativity.
Kaniadakis, G
2002-11-01
In Ref. [Physica A 296, 405 (2001)], starting from the one parameter deformation of the exponential function exp(kappa)(x)=(sqrt[1+kappa(2)x(2)]+kappax)(1/kappa), a statistical mechanics has been constructed which reduces to the ordinary Boltzmann-Gibbs statistical mechanics as the deformation parameter kappa approaches to zero. The distribution f=exp(kappa)(-beta E+betamu) obtained within this statistical mechanics shows a power law tail and depends on the nonspecified parameter beta, containing all the information about the temperature of the system. On the other hand, the entropic form S(kappa)= integral d(3)p(c(kappa) f(1+kappa)+c(-kappa) f(1-kappa)), which after maximization produces the distribution f and reduces to the standard Boltzmann-Shannon entropy S0 as kappa-->0, contains the coefficient c(kappa) whose expression involves, beside the Boltzmann constant, another nonspecified parameter alpha. In the present effort we show that S(kappa) is the unique existing entropy obtained by a continuous deformation of S0 and preserving unaltered its fundamental properties of concavity, additivity, and extensivity. These properties of S(kappa) permit to determine unequivocally the values of the above mentioned parameters beta and alpha. Subsequently, we explain the origin of the deformation mechanism introduced by kappa and show that this deformation emerges naturally within the Einstein special relativity. Furthermore, we extend the theory in order to treat statistical systems in a time dependent and relativistic context. Then, we show that it is possible to determine in a self consistent scheme within the special relativity the values of the free parameter kappa which results to depend on the light speed c and reduces to zero as c--> infinity recovering in this way the ordinary statistical mechanics and thermodynamics. The statistical mechanics here presented, does not contain free parameters, preserves unaltered the mathematical and epistemological structure of
A Statistical Toolkit for Data Analysis
International Nuclear Information System (INIS)
Donadio, S.; Guatelli, S.; Mascialino, B.; Pfeiffer, A.; Pia, M.G.; Ribon, A.; Viarengo, P.
2006-01-01
The present project aims to develop an open-source and object-oriented software Toolkit for statistical data analysis. Its statistical testing component contains a variety of Goodness-of-Fit tests, from Chi-squared to Kolmogorov-Smirnov, to less known, but generally much more powerful tests such as Anderson-Darling, Goodman, Fisz-Cramer-von Mises, Kuiper, Tiku. Thanks to the component-based design and the usage of the standard abstract interfaces for data analysis, this tool can be used by other data analysis systems or integrated in experimental software frameworks. This Toolkit has been released and is downloadable from the web. In this paper we describe the statistical details of the algorithms, the computational features of the Toolkit and describe the code validation
Advanced data analysis in neuroscience integrating statistical and computational models
Durstewitz, Daniel
2017-01-01
This book is intended for use in advanced graduate courses in statistics / machine learning, as well as for all experimental neuroscientists seeking to understand statistical methods at a deeper level, and theoretical neuroscientists with a limited background in statistics. It reviews almost all areas of applied statistics, from basic statistical estimation and test theory, linear and nonlinear approaches for regression and classification, to model selection and methods for dimensionality reduction, density estimation and unsupervised clustering. Its focus, however, is linear and nonlinear time series analysis from a dynamical systems perspective, based on which it aims to convey an understanding also of the dynamical mechanisms that could have generated observed time series. Further, it integrates computational modeling of behavioral and neural dynamics with statistical estimation and hypothesis testing. This way computational models in neuroscience are not only explanat ory frameworks, but become powerfu...
Analysis of statistical misconception in terms of statistical reasoning
Maryati, I.; Priatna, N.
2018-05-01
Reasoning skill is needed for everyone to face globalization era, because every person have to be able to manage and use information from all over the world which can be obtained easily. Statistical reasoning skill is the ability to collect, group, process, interpret, and draw conclusion of information. Developing this skill can be done through various levels of education. However, the skill is low because many people assume that statistics is just the ability to count and using formulas and so do students. Students still have negative attitude toward course which is related to research. The purpose of this research is analyzing students’ misconception in descriptive statistic course toward the statistical reasoning skill. The observation was done by analyzing the misconception test result and statistical reasoning skill test; observing the students’ misconception effect toward statistical reasoning skill. The sample of this research was 32 students of math education department who had taken descriptive statistic course. The mean value of misconception test was 49,7 and standard deviation was 10,6 whereas the mean value of statistical reasoning skill test was 51,8 and standard deviation was 8,5. If the minimal value is 65 to state the standard achievement of a course competence, students’ mean value is lower than the standard competence. The result of students’ misconception study emphasized on which sub discussion that should be considered. Based on the assessment result, it was found that students’ misconception happen on this: 1) writing mathematical sentence and symbol well, 2) understanding basic definitions, 3) determining concept that will be used in solving problem. In statistical reasoning skill, the assessment was done to measure reasoning from: 1) data, 2) representation, 3) statistic format, 4) probability, 5) sample, and 6) association.
Fundamental link between system theory and statistical mechanics
International Nuclear Information System (INIS)
Atmanspacher, H.; Scheingraber, H.
1987-01-01
A fundamental link between system theory and statistical mechanics has been found to be established by the Kolmogorov entropy. By this quantity the temporal evolution of dynamical systems can be classified into regular, chaotic, and stochastic processes. Since K represents a measure for the internal information creation rate of dynamical systems, it provides an approach to irreversibility. The formal relationship to statistical mechanics is derived by means of an operator formalism originally introduced by Prigogine. For a Liouville operator L and an information operator M tilde acting on a distribution in phase space, it is shown that i[L, M tilde] = KI (I = identity operator). As a first consequence of this equivalence, a relation is obtained between the chaotic correlation time of a system and Prigogine's concept of a finite duration of presence. Finally, the existence of chaos in quantum systems is discussed with respect to the existence of a quantum mechanical time operator
Statistical analysis of network data with R
Kolaczyk, Eric D
2014-01-01
Networks have permeated everyday life through everyday realities like the Internet, social networks, and viral marketing. As such, network analysis is an important growth area in the quantitative sciences, with roots in social network analysis going back to the 1930s and graph theory going back centuries. Measurement and analysis are integral components of network research. As a result, statistical methods play a critical role in network analysis. This book is the first of its kind in network research. It can be used as a stand-alone resource in which multiple R packages are used to illustrate how to conduct a wide range of network analyses, from basic manipulation and visualization, to summary and characterization, to modeling of network data. The central package is igraph, which provides extensive capabilities for studying network graphs in R. This text builds on Eric D. Kolaczyk’s book Statistical Analysis of Network Data (Springer, 2009).
Statistical mechanics and stability of random lattice field theory
International Nuclear Information System (INIS)
Baskaran, G.
1984-01-01
The averaging procedure in the random lattice field theory is studied by viewing it as a statistical mechanics of a system of classical particles. The corresponding thermodynamic phase is shown to determine the random lattice configuration which contributes dominantly to the generating function. The non-abelian gauge theory in four (space plus time) dimensions in the annealed and quenched averaging versions is shown to exist as an ideal classical gas, implying that macroscopically homogeneous configurations dominate the configurational averaging. For the free massless scalar field theory with O(n) global symmetry, in the annealed average, the pressure becomes negative for dimensions greater than two when n exceeds a critical number. This implies that macroscopically inhomogeneous collapsed configurations contribute dominantly. In the quenched averaging, the collapse of the massless scalar field theory is prevented and the system becomes an ideal gas which is at infinite temperature. Our results are obtained using exact scaling analysis. We also show approximately that SU(N) gauge theory collapses for dimensions greater than four in the annealed average. Within the same approximation, the collapse is prevented in the quenched average. We also obtain exact scaling differential equations satisfied by the generating function and physical quantities. (orig.)
Statistical mechanics of two-dimensional and geophysical flows
International Nuclear Information System (INIS)
Bouchet, Freddy; Venaille, Antoine
2012-01-01
The theoretical study of the self-organization of two-dimensional and geophysical turbulent flows is addressed based on statistical mechanics methods. This review is a self-contained presentation of classical and recent works on this subject; from the statistical mechanics basis of the theory up to applications to Jupiter’s troposphere and ocean vortices and jets. Emphasize has been placed on examples with available analytical treatment in order to favor better understanding of the physics and dynamics. After a brief presentation of the 2D Euler and quasi-geostrophic equations, the specificity of two-dimensional and geophysical turbulence is emphasized. The equilibrium microcanonical measure is built from the Liouville theorem. Important statistical mechanics concepts (large deviations and mean field approach) and thermodynamic concepts (ensemble inequivalence and negative heat capacity) are briefly explained and described. On this theoretical basis, we predict the output of the long time evolution of complex turbulent flows as statistical equilibria. This is applied to make quantitative models of two-dimensional turbulence, the Great Red Spot and other Jovian vortices, ocean jets like the Gulf-Stream, and ocean vortices. A detailed comparison between these statistical equilibria and real flow observations is provided. We also present recent results for non-equilibrium situations, for the studies of either the relaxation towards equilibrium or non-equilibrium steady states. In this last case, forces and dissipation are in a statistical balance; fluxes of conserved quantity characterize the system and microcanonical or other equilibrium measures no longer describe the system.
Statistics and analysis of scientific data
Bonamente, Massimiliano
2017-01-01
The revised second edition of this textbook provides the reader with a solid foundation in probability theory and statistics as applied to the physical sciences, engineering and related fields. It covers a broad range of numerical and analytical methods that are essential for the correct analysis of scientific data, including probability theory, distribution functions of statistics, fits to two-dimensional data and parameter estimation, Monte Carlo methods and Markov chains. Features new to this edition include: • a discussion of statistical techniques employed in business science, such as multiple regression analysis of multivariate datasets. • a new chapter on the various measures of the mean including logarithmic averages. • new chapters on systematic errors and intrinsic scatter, and on the fitting of data with bivariate errors. • a new case study and additional worked examples. • mathematical derivations and theoretical background material have been appropriately marked,to improve the readabili...
Statistical analysis on extreme wave height
Digital Repository Service at National Institute of Oceanography (India)
Teena, N.V.; SanilKumar, V.; Sudheesh, K.; Sajeev, R.
-294. • WAFO (2000) – A MATLAB toolbox for analysis of random waves and loads, Lund University, Sweden, homepage http://www.maths.lth.se/matstat/wafo/,2000. 15 Table 1: Statistical results of data and fitted distribution for cumulative distribution...
Applied Behavior Analysis and Statistical Process Control?
Hopkins, B. L.
1995-01-01
Incorporating statistical process control (SPC) methods into applied behavior analysis is discussed. It is claimed that SPC methods would likely reduce applied behavior analysts' intimate contacts with problems and would likely yield poor treatment and research decisions. Cases and data presented by Pfadt and Wheeler (1995) are cited as examples.…
The fuzzy approach to statistical analysis
Coppi, Renato; Gil, Maria A.; Kiers, Henk A. L.
2006-01-01
For the last decades, research studies have been developed in which a coalition of Fuzzy Sets Theory and Statistics has been established with different purposes. These namely are: (i) to introduce new data analysis problems in which the objective involves either fuzzy relationships or fuzzy terms;
On the statistical-mechanical meaning of the Bousso bound
International Nuclear Information System (INIS)
Pesci, Alessandro
2008-01-01
The Bousso entropy bound, in its generalized form, is investigated for the case of perfect fluids at local thermodynamic equilibrium and evidence is found that the bound is satisfied if and only if a certain local thermodynamic property holds, emerging when the attempt is made to apply the bound to thin layers of matter. This property consists of the existence of an ultimate lower limit l* to the thickness of the slices for which a statistical-mechanical description is viable, depending l* on the thermodynamical variables which define the state of the system locally. This limiting scale, found to be in general much larger than the Planck scale (so that no Planck scale physics must be necessarily invoked to justify it), appears not related to gravity and this suggests that the generalized entropy bound is likely to be rooted on conventional flat-spacetime statistical mechanics, with the maximum admitted entropy being however actually determined also by gravity. Some examples of ideal fluids are considered in order to identify the mechanisms which can set a lower limit to the statistical-mechanical description and these systems are found to respect the lower limiting scale l*. The photon gas, in particular, appears to seemingly saturate this limiting scale and the consequence is drawn that for systems consisting of a single slice of a photon gas with thickness l*, the generalized Bousso bound is saturated. It is argued that this seems to open the way to a peculiar understanding of black hole entropy: if an entropy can meaningfully (i.e. with a second law) be assigned to a black hole, the value A/4 for it (where A is the area of the black hole) is required simply by (conventional) statistical mechanics coupled to general relativity
Plasma data analysis using statistical analysis system
International Nuclear Information System (INIS)
Yoshida, Z.; Iwata, Y.; Fukuda, Y.; Inoue, N.
1987-01-01
Multivariate factor analysis has been applied to a plasma data base of REPUTE-1. The characteristics of the reverse field pinch plasma in REPUTE-1 are shown to be explained by four independent parameters which are described in the report. The well known scaling laws F/sub chi/ proportional to I/sub p/, T/sub e/ proportional to I/sub p/, and tau/sub E/ proportional to N/sub e/ are also confirmed. 4 refs., 8 figs., 1 tab
Statistical analysis of metallicity in spiral galaxies
Energy Technology Data Exchange (ETDEWEB)
Galeotti, P [Consiglio Nazionale delle Ricerche, Turin (Italy). Lab. di Cosmo-Geofisica; Turin Univ. (Italy). Ist. di Fisica Generale)
1981-04-01
A principal component analysis of metallicity and other integral properties of 33 spiral galaxies is presented; the involved parameters are: morphological type, diameter, luminosity and metallicity. From the statistical analysis it is concluded that the sample has only two significant dimensions and additonal tests, involving different parameters, show similar results. Thus it seems that only type and luminosity are independent variables, being the other integral properties of spiral galaxies correlated with them.
Selected papers on analysis, probability, and statistics
Nomizu, Katsumi
1994-01-01
This book presents papers that originally appeared in the Japanese journal Sugaku. The papers fall into the general area of mathematical analysis as it pertains to probability and statistics, dynamical systems, differential equations and analytic function theory. Among the topics discussed are: stochastic differential equations, spectra of the Laplacian and Schrödinger operators, nonlinear partial differential equations which generate dissipative dynamical systems, fractal analysis on self-similar sets and the global structure of analytic functions.
Statistical evaluation of vibration analysis techniques
Milner, G. Martin; Miller, Patrice S.
1987-01-01
An evaluation methodology is presented for a selection of candidate vibration analysis techniques applicable to machinery representative of the environmental control and life support system of advanced spacecraft; illustrative results are given. Attention is given to the statistical analysis of small sample experiments, the quantification of detection performance for diverse techniques through the computation of probability of detection versus probability of false alarm, and the quantification of diagnostic performance.
Statistical Analysis of Data for Timber Strengths
DEFF Research Database (Denmark)
Sørensen, John Dalsgaard
2003-01-01
Statistical analyses are performed for material strength parameters from a large number of specimens of structural timber. Non-parametric statistical analysis and fits have been investigated for the following distribution types: Normal, Lognormal, 2 parameter Weibull and 3-parameter Weibull...... fits to the data available, especially if tail fits are used whereas the Log Normal distribution generally gives a poor fit and larger coefficients of variation, especially if tail fits are used. The implications on the reliability level of typical structural elements and on partial safety factors...... for timber are investigated....
The Statistical Analysis of Time Series
Anderson, T W
2011-01-01
The Wiley Classics Library consists of selected books that have become recognized classics in their respective fields. With these new unabridged and inexpensive editions, Wiley hopes to extend the life of these important works by making them available to future generations of mathematicians and scientists. Currently available in the Series: T. W. Anderson Statistical Analysis of Time Series T. S. Arthanari & Yadolah Dodge Mathematical Programming in Statistics Emil Artin Geometric Algebra Norman T. J. Bailey The Elements of Stochastic Processes with Applications to the Natural Sciences George
Algebraic methods in statistical mechanics and quantum field theory
Emch, Dr Gérard G
2009-01-01
This systematic algebraic approach concerns problems involving a large number of degrees of freedom. It extends the traditional formalism of quantum mechanics, and it eliminates conceptual and mathematical difficulties common to the development of statistical mechanics and quantum field theory. Further, the approach is linked to research in applied and pure mathematics, offering a reflection of the interplay between formulation of physical motivations and self-contained descriptions of the mathematical methods.The four-part treatment begins with a survey of algebraic approaches to certain phys
Generalized Statistical Mechanics at the Onset of Chaos
Directory of Open Access Journals (Sweden)
Alberto Robledo
2013-11-01
Full Text Available Transitions to chaos in archetypal low-dimensional nonlinear maps offer real and precise model systems in which to assess proposed generalizations of statistical mechanics. The known association of chaotic dynamics with the structure of Boltzmann–Gibbs (BG statistical mechanics has suggested the potential verification of these generalizations at the onset of chaos, when the only Lyapunov exponent vanishes and ergodic and mixing properties cease to hold. There are three well-known routes to chaos in these deterministic dissipative systems, period-doubling, quasi-periodicity and intermittency, which provide the setting in which to explore the limit of validity of the standard BG structure. It has been shown that there is a rich and intricate behavior for both the dynamics within and towards the attractors at the onset of chaos and that these two kinds of properties are linked via generalized statistical-mechanical expressions. Amongst the topics presented are: (i permanently growing sensitivity fluctuations and their infinite family of generalized Pesin identities; (ii the emergence of statistical-mechanical structures in the dynamics along the routes to chaos; (iii dynamical hierarchies with modular organization; and (iv limit distributions of sums of deterministic variables. The occurrence of generalized entropy properties in condensed-matter physical systems is illustrated by considering critical fluctuations, localization transition and glass formation. We complete our presentation with the description of the manifestations of the dynamics at the transitions to chaos in various kinds of complex systems, such as, frequency and size rank distributions and complex network images of time series. We discuss the results.
Llamas, Alberto; Al-Lal, Ana-María; García-Martínez, María-Jesús; Ortega, Marcelo F; Llamas, Juan F; Lapuerta, Magín; Canoira, Laureano
2017-05-15
Polycyclic Aromatic Hydrocarbons (PAHs) are pollutants of concern due to their carcinogenic and mutagenic activity. Their emissions are mainly related with the combustion or pyrolysis of the organic matter, such as in fossil fuels combustion. It is important to characterize PAHs in the combustions of biofuels due to their increasing importance in the actual energetic setting. There is a lot of research focused in PAHs emission due to the combustion in diesel engines; but only few of them have analyzed the effect of raw material and type of alcohol used in the transesterification process. Different raw materials (i.e. animal fat, palm, rapeseed, linseed, peanut, coconut, and soybean oils) have been used for obtaining FAME and FAEE. A method for measuring PAHs generated during combustion in a bomb calorimeter has been developed. Combustion was made at different oxygen pressures and the samples were taken from the bomb after each combustion. Samples were extracted and the PAHs amounts formed during combustion were analyzed by GC-MS. This research shows the statistical relationships among the 16 PAHs of concern, biodiesel composition and oxygen pressure during combustion. Copyright © 2017 Elsevier B.V. All rights reserved.
Realistic thermodynamic and statistical-mechanical measures for neural synchronization.
Kim, Sang-Yoon; Lim, Woochang
2014-04-15
Synchronized brain rhythms, associated with diverse cognitive functions, have been observed in electrical recordings of brain activity. Neural synchronization may be well described by using the population-averaged global potential VG in computational neuroscience. The time-averaged fluctuation of VG plays the role of a "thermodynamic" order parameter O used for describing the synchrony-asynchrony transition in neural systems. Population spike synchronization may be well visualized in the raster plot of neural spikes. The degree of neural synchronization seen in the raster plot is well measured in terms of a "statistical-mechanical" spike-based measure Ms introduced by considering the occupation and the pacing patterns of spikes. The global potential VG is also used to give a reference global cycle for the calculation of Ms. Hence, VG becomes an important collective quantity because it is associated with calculation of both O and Ms. However, it is practically difficult to directly get VG in real experiments. To overcome this difficulty, instead of VG, we employ the instantaneous population spike rate (IPSR) which can be obtained in experiments, and develop realistic thermodynamic and statistical-mechanical measures, based on IPSR, to make practical characterization of the neural synchronization in both computational and experimental neuroscience. Particularly, more accurate characterization of weak sparse spike synchronization can be achieved in terms of realistic statistical-mechanical IPSR-based measure, in comparison with the conventional measure based on VG. Copyright © 2014. Published by Elsevier B.V.
Bovier, Anton
2006-06-01
Our mathematical understanding of the statistical mechanics of disordered systems is going through a period of stunning progress. This self-contained book is a graduate-level introduction for mathematicians and for physicists interested in the mathematical foundations of the field, and can be used as a textbook for a two-semester course on mathematical statistical mechanics. It assumes only basic knowledge of classical physics and, on the mathematics side, a good working knowledge of graduate-level probability theory. The book starts with a concise introduction to statistical mechanics, proceeds to disordered lattice spin systems, and concludes with a presentation of the latest developments in the mathematical understanding of mean-field spin glass models. In particular, recent progress towards a rigorous understanding of the replica symmetry-breaking solutions of the Sherrington-Kirkpatrick spin glass models, due to Guerra, Aizenman-Sims-Starr and Talagrand, is reviewed in some detail. Comprehensive introduction to an active and fascinating area of research Clear exposition that builds to the state of the art in the mathematics of spin glasses Written by a well-known and active researcher in the field
Developments in statistical analysis in quantitative genetics
DEFF Research Database (Denmark)
Sorensen, Daniel
2009-01-01
of genetic means and variances, models for the analysis of categorical and count data, the statistical genetics of a model postulating that environmental variance is partly under genetic control, and a short discussion of models that incorporate massive genetic marker information. We provide an overview......A remarkable research impetus has taken place in statistical genetics since the last World Conference. This has been stimulated by breakthroughs in molecular genetics, automated data-recording devices and computer-intensive statistical methods. The latter were revolutionized by the bootstrap...... and by Markov chain Monte Carlo (McMC). In this overview a number of specific areas are chosen to illustrate the enormous flexibility that McMC has provided for fitting models and exploring features of data that were previously inaccessible. The selected areas are inferences of the trajectories over time...
Statistical analysis of next generation sequencing data
Nettleton, Dan
2014-01-01
Next Generation Sequencing (NGS) is the latest high throughput technology to revolutionize genomic research. NGS generates massive genomic datasets that play a key role in the big data phenomenon that surrounds us today. To extract signals from high-dimensional NGS data and make valid statistical inferences and predictions, novel data analytic and statistical techniques are needed. This book contains 20 chapters written by prominent statisticians working with NGS data. The topics range from basic preprocessing and analysis with NGS data to more complex genomic applications such as copy number variation and isoform expression detection. Research statisticians who want to learn about this growing and exciting area will find this book useful. In addition, many chapters from this book could be included in graduate-level classes in statistical bioinformatics for training future biostatisticians who will be expected to deal with genomic data in basic biomedical research, genomic clinical trials and personalized med...
Robust statistics and geochemical data analysis
International Nuclear Information System (INIS)
Di, Z.
1987-01-01
Advantages of robust procedures over ordinary least-squares procedures in geochemical data analysis is demonstrated using NURE data from the Hot Springs Quadrangle, South Dakota, USA. Robust principal components analysis with 5% multivariate trimming successfully guarded the analysis against perturbations by outliers and increased the number of interpretable factors. Regression with SINE estimates significantly increased the goodness-of-fit of the regression and improved the correspondence of delineated anomalies with known uranium prospects. Because of the ubiquitous existence of outliers in geochemical data, robust statistical procedures are suggested as routine procedures to replace ordinary least-squares procedures
Analysis of photon statistics with Silicon Photomultiplier
International Nuclear Information System (INIS)
D'Ascenzo, N.; Saveliev, V.; Wang, L.; Xie, Q.
2015-01-01
The Silicon Photomultiplier (SiPM) is a novel silicon-based photodetector, which represents the modern perspective of low photon flux detection. The aim of this paper is to provide an introduction on the statistical analysis methods needed to understand and estimate in quantitative way the correct features and description of the response of the SiPM to a coherent source of light
Vapor Pressure Data Analysis and Statistics
2016-12-01
near 8, 2000, and 200, respectively. The A (or a) value is directly related to vapor pressure and will be greater for high vapor pressure materials...1, (10) where n is the number of data points, Yi is the natural logarithm of the i th experimental vapor pressure value, and Xi is the...VAPOR PRESSURE DATA ANALYSIS AND STATISTICS ECBC-TR-1422 Ann Brozena RESEARCH AND TECHNOLOGY DIRECTORATE
Statistical analysis of the ASME KIc database
International Nuclear Information System (INIS)
Sokolov, M.A.
1998-01-01
The American Society of Mechanical Engineers (ASME) K Ic curve is a function of test temperature (T) normalized to a reference nil-ductility temperature, RT NDT , namely, T-RT NDT . It was constructed as the lower boundary to the available K Ic database. Being a lower bound to the unique but limited database, the ASME K Ic curve concept does not discuss probability matters. However, a continuing evolution of fracture mechanics advances has led to employment of the Weibull distribution function to model the scatter of fracture toughness values in the transition range. The Weibull statistic/master curve approach was applied to analyze the current ASME K Ic database. It is shown that the Weibull distribution function models the scatter in K Ic data from different materials very well, while the temperature dependence is described by the master curve. Probabilistic-based tolerance-bound curves are suggested to describe lower-bound K Ic values
Introduction to nonequilibrium statistical mechanics with quantum field theory
International Nuclear Information System (INIS)
Kita, Takafumi
2010-01-01
In this article, we present a concise and self-contained introduction to nonequilibrium statistical mechanics with quantum field theory by considering an ensemble of interacting identical bosons or fermions as an example. Readers are assumed to be familiar with the Matsubara formalism of equilibrium statistical mechanics such as Feynman diagrams, the proper self-energy, and Dyson's equation. The aims are threefold: (1) to explain the fundamentals of nonequilibrium quantum field theory as simple as possible on the basis of the knowledge of the equilibrium counterpart; (2) to elucidate the hierarchy in describing nonequilibrium systems from Dyson's equation on the Keldysh contour to the Navier-Stokes equation in fluid mechanics via quantum transport equations and the Boltzmann equation; (3) to derive an expression of nonequilibrium entropy that evolves with time. In stage (1), we introduce nonequilibrium Green's function and the self-energy uniquely on the round-trip Keldysh contour, thereby avoiding possible confusions that may arise from defining multiple Green's functions at the very beginning. We try to present the Feynman rules for the perturbation expansion as simple as possible. In particular, we focus on the self-consistent perturbation expansion with the Luttinger-Ward thermodynamic functional, i.e., Baym's Φ-derivable approximation, which has a crucial property for nonequilibrium systems of obeying various conservation laws automatically. We also show how the two-particle correlations can be calculated within the Φ-derivable approximation, i.e., an issue of how to handle the 'Bogoliubov-Born-Green-Kirkwood-Yvons (BBGKY) hierarchy'. Aim (2) is performed through successive reductions of relevant variables with the Wigner transformation, the gradient expansion based on the Groenewold-Moyal product, and Enskog's expansion from local equilibrium. This part may be helpful for convincing readers that nonequilibrium systems can be handled microscopically with
International Nuclear Information System (INIS)
Oksengendler, B. L.; Turaeva, N. N.; Uralov, I.; Marasulov, M. B.
2012-01-01
The effect of multiple exciton generation is analyzed based on statistical physics, quantum mechanics, and synergetics. Statistical problems of the effect of multiple exciton generation (MEG) are broadened and take into account not only exciton generation, but also background excitation. The study of the role of surface states of quantum dots is based on the synergy of self-catalyzed electronic reactions. An analysis of the MEG mechanism is based on the idea of electronic shaking using the sudden perturbation method in quantum mechanics. All of the above-mentioned results are applied to the problem of calculating the limiting efficiency to transform solar energy into electric energy. (authors)
Alternative derivations of the statistical mechanical distribution laws.
Wall, F T
1971-08-01
A new approach is presented for the derivation of statistical mechanical distribution laws. The derivations are accomplished by minimizing the Helmholtz free energy under constant temperature and volume, instead of maximizing the entropy under constant energy and volume. An alternative method involves stipulating equality of chemical potential, or equality of activity, for particles in different energy levels. This approach leads to a general statement of distribution laws applicable to all systems for which thermodynamic probabilities can be written. The methods also avoid use of the calculus of variations, Lagrangian multipliers, and Stirling's approximation for the factorial. The results are applied specifically to Boltzmann, Fermi-Dirac, and Bose-Einstein statistics. The special significance of chemical potential and activity is discussed for microscopic systems.
Thermodynamics and statistical mechanics. [thermodynamic properties of gases
1976-01-01
The basic thermodynamic properties of gases are reviewed and the relations between them are derived from the first and second laws. The elements of statistical mechanics are then formulated and the partition function is derived. The classical form of the partition function is used to obtain the Maxwell-Boltzmann distribution of kinetic energies in the gas phase and the equipartition of energy theorem is given in its most general form. The thermodynamic properties are all derived as functions of the partition function. Quantum statistics are reviewed briefly and the differences between the Boltzmann distribution function for classical particles and the Fermi-Dirac and Bose-Einstein distributions for quantum particles are discussed.
Is quantum theory a form of statistical mechanics?
Adler, S. L.
2007-05-01
We give a review of the basic themes of my recent book: Adler S L 2004 Quantum Theory as an Emergent Phenomenon (Cambridge: Cambridge University Press). We first give motivations for considering the possibility that quantum mechanics is not exact, but is instead an accurate asymptotic approximation to a deeper level theory. For this deeper level, we propose a non-commutative generalization of classical mechanics, that we call "trace dynamics", and we give a brief survey of how it works, considering for simplicity only the bosonic case. We then discuss the statistical mechanics of trace dynamics and give our argument that with suitable approximations, the Ward identities for trace dynamics imply that ensemble averages in the canonical ensemble correspond to Wightman functions in quantum field theory. Thus, quantum theory emerges as the statistical thermodynamics of trace dynamics. Finally, we argue that Brownian motion corrections to this thermodynamics lead to stochastic corrections to the Schrödinger equation, of the type that have been much studied in the "continuous spontaneous localization" model of objective state vector reduction. In appendices to the talk, we give details of the existence of a conserved operator in trace dynamics that encodes the structure of the canonical algebra, of the derivation of the Ward identities, and of the proof that the stochastically-modified Schrödinger equation leads to state vector reduction with Born rule probabilities.
Representative volume size: A comparison of statistical continuum mechanics and statistical physics
Energy Technology Data Exchange (ETDEWEB)
AIDUN,JOHN B.; TRUCANO,TIMOTHY G.; LO,CHI S.; FYE,RICHARD M.
1999-05-01
In this combination background and position paper, the authors argue that careful work is needed to develop accurate methods for relating the results of fine-scale numerical simulations of material processes to meaningful values of macroscopic properties for use in constitutive models suitable for finite element solid mechanics simulations. To provide a definite context for this discussion, the problem is couched in terms of the lack of general objective criteria for identifying the size of the representative volume (RV) of a material. The objective of this report is to lay out at least the beginnings of an approach for applying results and methods from statistical physics to develop concepts and tools necessary for determining the RV size, as well as alternatives to RV volume-averaging for situations in which the RV is unmanageably large. The background necessary to understand the pertinent issues and statistical physics concepts is presented.
Sensitivity analysis and related analysis : A survey of statistical techniques
Kleijnen, J.P.C.
1995-01-01
This paper reviews the state of the art in five related types of analysis, namely (i) sensitivity or what-if analysis, (ii) uncertainty or risk analysis, (iii) screening, (iv) validation, and (v) optimization. The main question is: when should which type of analysis be applied; which statistical
Nonequilibrium statistical mechanics and stochastic thermodynamics of small systems
International Nuclear Information System (INIS)
Tu Zhanchun
2014-01-01
Thermodynamics is an old subject. The research objects in conventional thermodynamics are macroscopic systems with huge number of particles. In recent 30 years, thermodynamics of small systems is a frontier topic in physics. Here we introduce nonequilibrium statistical mechanics and stochastic thermodynamics of small systems. As a case study, we construct a Canot-like cycle of a stochastic heat engine with a single particle controlled by a time-dependent harmonic potential. We find that the efficiency at maximum power is 1 - √T c /T h , where Tc and Th are the temperatures of cold bath and hot bath, respectively. (author)
Statistical mechanics of attractor neural network models with synaptic depression
International Nuclear Information System (INIS)
Igarashi, Yasuhiko; Oizumi, Masafumi; Otsubo, Yosuke; Nagata, Kenji; Okada, Masato
2009-01-01
Synaptic depression is known to control gain for presynaptic inputs. Since cortical neurons receive thousands of presynaptic inputs, and their outputs are fed into thousands of other neurons, the synaptic depression should influence macroscopic properties of neural networks. We employ simple neural network models to explore the macroscopic effects of synaptic depression. Systems with the synaptic depression cannot be analyzed due to asymmetry of connections with the conventional equilibrium statistical-mechanical approach. Thus, we first propose a microscopic dynamical mean field theory. Next, we derive macroscopic steady state equations and discuss the stabilities of steady states for various types of neural network models.
From inverse problems to learning: a Statistical Mechanics approach
Baldassi, Carlo; Gerace, Federica; Saglietti, Luca; Zecchina, Riccardo
2018-01-01
We present a brief introduction to the statistical mechanics approaches for the study of inverse problems in data science. We then provide concrete new results on inferring couplings from sampled configurations in systems characterized by an extensive number of stable attractors in the low temperature regime. We also show how these result are connected to the problem of learning with realistic weak signals in computational neuroscience. Our techniques and algorithms rely on advanced mean-field methods developed in the context of disordered systems.
Analysis of Variance in Statistical Image Processing
Kurz, Ludwik; Hafed Benteftifa, M.
1997-04-01
A key problem in practical image processing is the detection of specific features in a noisy image. Analysis of variance (ANOVA) techniques can be very effective in such situations, and this book gives a detailed account of the use of ANOVA in statistical image processing. The book begins by describing the statistical representation of images in the various ANOVA models. The authors present a number of computationally efficient algorithms and techniques to deal with such problems as line, edge, and object detection, as well as image restoration and enhancement. By describing the basic principles of these techniques, and showing their use in specific situations, the book will facilitate the design of new algorithms for particular applications. It will be of great interest to graduate students and engineers in the field of image processing and pattern recognition.
Statistical Analysis of Zebrafish Locomotor Response.
Liu, Yiwen; Carmer, Robert; Zhang, Gaonan; Venkatraman, Prahatha; Brown, Skye Ashton; Pang, Chi-Pui; Zhang, Mingzhi; Ma, Ping; Leung, Yuk Fai
2015-01-01
Zebrafish larvae display rich locomotor behaviour upon external stimulation. The movement can be simultaneously tracked from many larvae arranged in multi-well plates. The resulting time-series locomotor data have been used to reveal new insights into neurobiology and pharmacology. However, the data are of large scale, and the corresponding locomotor behavior is affected by multiple factors. These issues pose a statistical challenge for comparing larval activities. To address this gap, this study has analyzed a visually-driven locomotor behaviour named the visual motor response (VMR) by the Hotelling's T-squared test. This test is congruent with comparing locomotor profiles from a time period. Different wild-type (WT) strains were compared using the test, which shows that they responded differently to light change at different developmental stages. The performance of this test was evaluated by a power analysis, which shows that the test was sensitive for detecting differences between experimental groups with sample numbers that were commonly used in various studies. In addition, this study investigated the effects of various factors that might affect the VMR by multivariate analysis of variance (MANOVA). The results indicate that the larval activity was generally affected by stage, light stimulus, their interaction, and location in the plate. Nonetheless, different factors affected larval activity differently over time, as indicated by a dynamical analysis of the activity at each second. Intriguingly, this analysis also shows that biological and technical repeats had negligible effect on larval activity. This finding is consistent with that from the Hotelling's T-squared test, and suggests that experimental repeats can be combined to enhance statistical power. Together, these investigations have established a statistical framework for analyzing VMR data, a framework that should be generally applicable to other locomotor data with similar structure.
Multiple-shock initiation via statistical crack mechanics
Energy Technology Data Exchange (ETDEWEB)
Dienes, J.K.; Kershner, J.D.
1998-12-31
Statistical Crack Mechanics (SCRAM) is a theoretical approach to the behavior of brittle materials that accounts for the behavior of an ensemble of microcracks, including their opening, shear, growth, and coalescence. Mechanical parameters are based on measured strain-softening behavior. In applications to explosive and propellant sensitivity it is assumed that closed cracks act as hot spots, and that the heating due to interfacial friction initiates reactions which are modeled as one-dimensional heat flow with an Arrhenius source term, and computed in a subscale grid. Post-ignition behavior of hot spots is treated with the burn model of Ward, Son and Brewster. Numerical calculations using SCRAM-HYDROX are compared with the multiple-shock experiments of Mulford et al. in which the particle velocity in PBX 9501 is measured with embedded wires, and reactions are initiated and quenched.
International Nuclear Information System (INIS)
Remler, E.A.
1977-01-01
A gauge-invariant version of the Wigner representation is used to relate relativistic mechanics, statistical mechanics, and quantum field theory in the context of the electrodynamics of scalar particles. A unified formulation of quantum field theory and statistical mechanics is developed which clarifies the physics interpretation of the single-particle Wigner function. A covariant form of Ehrenfest's theorem is derived. Classical electrodynamics is derived from quantum field theory after making a random-phase approximation. The validity of this approximation is discussed
Budiyono, Agung; Rohrlich, Daniel
2017-11-03
Where does quantum mechanics part ways with classical mechanics? How does quantum randomness differ fundamentally from classical randomness? We cannot fully explain how the theories differ until we can derive them within a single axiomatic framework, allowing an unambiguous account of how one theory is the limit of the other. Here we derive non-relativistic quantum mechanics and classical statistical mechanics within a common framework. The common axioms include conservation of average energy and conservation of probability current. But two axioms distinguish quantum mechanics from classical statistical mechanics: an "ontic extension" defines a nonseparable (global) random variable that generates physical correlations, and an "epistemic restriction" constrains allowed phase space distributions. The ontic extension and epistemic restriction, with strength on the order of Planck's constant, imply quantum entanglement and uncertainty relations. This framework suggests that the wave function is epistemic, yet it does not provide an ontic dynamics for individual systems.
Statistical mechanics in the context of special relativity. II.
Kaniadakis, G
2005-09-01
The special relativity laws emerge as one-parameter (light speed) generalizations of the corresponding laws of classical physics. These generalizations, imposed by the Lorentz transformations, affect both the definition of the various physical observables (e.g., momentum, energy, etc.), as well as the mathematical apparatus of the theory. Here, following the general lines of [Phys. Rev. E 66, 056125 (2002)], we show that the Lorentz transformations impose also a proper one-parameter generalization of the classical Boltzmann-Gibbs-Shannon entropy. The obtained relativistic entropy permits us to construct a coherent and self-consistent relativistic statistical theory, preserving the main features of the ordinary statistical theory, which is recovered in the classical limit. The predicted distribution function is a one-parameter continuous deformation of the classical Maxwell-Boltzmann distribution and has a simple analytic form, showing power law tails in accordance with the experimental evidence. Furthermore, this statistical mechanics can be obtained as the stationary case of a generalized kinetic theory governed by an evolution equation obeying the H theorem and reproducing the Boltzmann equation of the ordinary kinetics in the classical limit.
On the Statistical Validation of Technical Analysis
Directory of Open Access Journals (Sweden)
Rosane Riera Freire
2007-06-01
Full Text Available Technical analysis, or charting, aims on visually identifying geometrical patterns in price charts in order to antecipate price "trends". In this paper we revisit the issue of thecnical analysis validation which has been tackled in the literature without taking care for (i the presence of heterogeneity and (ii statistical dependence in the analyzed data - various agglutinated return time series from distinct financial securities. The main purpose here is to address the first cited problem by suggesting a validation methodology that also "homogenizes" the securities according to the finite dimensional probability distribution of their return series. The general steps go through the identification of the stochastic processes for the securities returns, the clustering of similar securities and, finally, the identification of presence, or absence, of informatinal content obtained from those price patterns. We illustrate the proposed methodology with a real data exercise including several securities of the global market. Our investigation shows that there is a statistically significant informational content in two out of three common patterns usually found through technical analysis, namely: triangle, rectangle and head and shoulders.
Statistical trend analysis methods for temporal phenomena
International Nuclear Information System (INIS)
Lehtinen, E.; Pulkkinen, U.; Poern, K.
1997-04-01
We consider point events occurring in a random way in time. In many applications the pattern of occurrence is of intrinsic interest as indicating a trend or some other systematic feature in the rate of occurrence. The purpose of this report is to survey briefly different statistical trend analysis methods and illustrate their applicability to temporal phenomena in particular. The trend testing of point events is usually seen as the testing of the hypotheses concerning the intensity of the occurrence of events. When the intensity function is parametrized, the testing of trend is a typical parametric testing problem. In industrial applications the operational experience generally does not suggest any specified model and method in advance. Therefore, and particularly, if the Poisson process assumption is very questionable, it is desirable to apply tests that are valid for a wide variety of possible processes. The alternative approach for trend testing is to use some non-parametric procedure. In this report we have presented four non-parametric tests: The Cox-Stuart test, the Wilcoxon signed ranks test, the Mann test, and the exponential ordered scores test. In addition to the classical parametric and non-parametric approaches we have also considered the Bayesian trend analysis. First we discuss a Bayesian model, which is based on a power law intensity model. The Bayesian statistical inferences are based on the analysis of the posterior distribution of the trend parameters, and the probability of trend is immediately seen from these distributions. We applied some of the methods discussed in an example case. It should be noted, that this report is a feasibility study rather than a scientific evaluation of statistical methods, and the examples can only be seen as demonstrations of the methods
Statistical trend analysis methods for temporal phenomena
Energy Technology Data Exchange (ETDEWEB)
Lehtinen, E.; Pulkkinen, U. [VTT Automation, (Finland); Poern, K. [Poern Consulting, Nykoeping (Sweden)
1997-04-01
We consider point events occurring in a random way in time. In many applications the pattern of occurrence is of intrinsic interest as indicating a trend or some other systematic feature in the rate of occurrence. The purpose of this report is to survey briefly different statistical trend analysis methods and illustrate their applicability to temporal phenomena in particular. The trend testing of point events is usually seen as the testing of the hypotheses concerning the intensity of the occurrence of events. When the intensity function is parametrized, the testing of trend is a typical parametric testing problem. In industrial applications the operational experience generally does not suggest any specified model and method in advance. Therefore, and particularly, if the Poisson process assumption is very questionable, it is desirable to apply tests that are valid for a wide variety of possible processes. The alternative approach for trend testing is to use some non-parametric procedure. In this report we have presented four non-parametric tests: The Cox-Stuart test, the Wilcoxon signed ranks test, the Mann test, and the exponential ordered scores test. In addition to the classical parametric and non-parametric approaches we have also considered the Bayesian trend analysis. First we discuss a Bayesian model, which is based on a power law intensity model. The Bayesian statistical inferences are based on the analysis of the posterior distribution of the trend parameters, and the probability of trend is immediately seen from these distributions. We applied some of the methods discussed in an example case. It should be noted, that this report is a feasibility study rather than a scientific evaluation of statistical methods, and the examples can only be seen as demonstrations of the methods. 14 refs, 10 figs.
Statistical mechanics of the vertex-cover problem
Hartmann, Alexander K.; Weigt, Martin
2003-10-01
We review recent progress in the study of the vertex-cover problem (VC). The VC belongs to the class of NP-complete graph theoretical problems, which plays a central role in theoretical computer science. On ensembles of random graphs, VC exhibits a coverable-uncoverable phase transition. Very close to this transition, depending on the solution algorithm, easy-hard transitions in the typical running time of the algorithms occur. We explain a statistical mechanics approach, which works by mapping the VC to a hard-core lattice gas, and then applying techniques such as the replica trick or the cavity approach. Using these methods, the phase diagram of the VC could be obtained exactly for connectivities c e, the solution of the VC exhibits full replica symmetry breaking. The statistical mechanics approach can also be used to study analytically the typical running time of simple complete and incomplete algorithms for the VC. Finally, we describe recent results for the VC when studied on other ensembles of finite- and infinite-dimensional graphs.
Statistical mechanics of the vertex-cover problem
International Nuclear Information System (INIS)
Hartmann, Alexander K; Weigt, Martin
2003-01-01
We review recent progress in the study of the vertex-cover problem (VC). The VC belongs to the class of NP-complete graph theoretical problems, which plays a central role in theoretical computer science. On ensembles of random graphs, VC exhibits a coverable-uncoverable phase transition. Very close to this transition, depending on the solution algorithm, easy-hard transitions in the typical running time of the algorithms occur. We explain a statistical mechanics approach, which works by mapping the VC to a hard-core lattice gas, and then applying techniques such as the replica trick or the cavity approach. Using these methods, the phase diagram of the VC could be obtained exactly for connectivities c e, the solution of the VC exhibits full replica symmetry breaking. The statistical mechanics approach can also be used to study analytically the typical running time of simple complete and incomplete algorithms for the VC. Finally, we describe recent results for the VC when studied on other ensembles of finite- and infinite-dimensional graphs
Statistical learning: a powerful mechanism that operates by mere exposure.
Aslin, Richard N
2017-01-01
How do infants learn so rapidly and with little apparent effort? In 1996, Saffran, Aslin, and Newport reported that 8-month-old human infants could learn the underlying temporal structure of a stream of speech syllables after only 2 min of passive listening. This demonstration of what was called statistical learning, involving no instruction, reinforcement, or feedback, led to dozens of confirmations of this powerful mechanism of implicit learning in a variety of modalities, domains, and species. These findings reveal that infants are not nearly as dependent on explicit forms of instruction as we might have assumed from studies of learning in which children or adults are taught facts such as math or problem solving skills. Instead, at least in some domains, infants soak up the information around them by mere exposure. Learning and development in these domains thus appear to occur automatically and with little active involvement by an instructor (parent or teacher). The details of this statistical learning mechanism are discussed, including how exposure to specific types of information can, under some circumstances, generalize to never-before-observed information, thereby enabling transfer of learning. WIREs Cogn Sci 2017, 8:e1373. doi: 10.1002/wcs.1373 For further resources related to this article, please visit the WIREs website. © 2016 Wiley Periodicals, Inc.
Statistical methods in the mechanical design of fuel assemblies
Energy Technology Data Exchange (ETDEWEB)
Radsak, C.; Streit, D.; Muench, C.J. [AREVA NP GmbH, Erlangen (Germany)
2013-07-01
The mechanical design of a fuel assembly is still being mainly performed in a de terministic way. This conservative approach is however not suitable to provide a realistic quantification of the design margins with respect to licensing criter ia for more and more demanding operating conditions (power upgrades, burnup increase,..). This quantification can be provided by statistical methods utilizing all available information (e.g. from manufacturing, experience feedback etc.) of the topic under consideration. During optimization e.g. of the holddown system certain objectives in the mechanical design of a fuel assembly (FA) can contradict each other, such as sufficient holddown forces enough to prevent fuel assembly lift-off and reducing the holddown forces to minimize axial loads on the fuel assembly structure to ensure no negative effect on the control rod movement.By u sing a statistical method the fuel assembly design can be optimized much better with respect to these objectives than it would be possible based on a deterministic approach. This leads to a more realistic assessment and safer way of operating fuel assemblies. Statistical models are defined on the one hand by the quanti le that has to be maintained concerning the design limit requirements (e.g. one FA quantile) and on the other hand by the confidence level which has to be met. Using the above example of the holddown force, a feasible quantile can be define d based on the requirement that less than one fuel assembly (quantile > 192/19 3 [%] = 99.5 %) in the core violates the holddown force limit w ith a confidence of 95%. (orig.)
Statistical analysis of solar proton events
Directory of Open Access Journals (Sweden)
V. Kurt
2004-06-01
Full Text Available A new catalogue of 253 solar proton events (SPEs with energy >10MeV and peak intensity >10 protons/cm2.s.sr (pfu at the Earth's orbit for three complete 11-year solar cycles (1970-2002 is given. A statistical analysis of this data set of SPEs and their associated flares that occurred during this time period is presented. It is outlined that 231 of these proton events are flare related and only 22 of them are not associated with Ha flares. It is also noteworthy that 42 of these events are registered as Ground Level Enhancements (GLEs in neutron monitors. The longitudinal distribution of the associated flares shows that a great number of these events are connected with west flares. This analysis enables one to understand the long-term dependence of the SPEs and the related flare characteristics on the solar cycle which are useful for space weather prediction.
Recent advances in statistical energy analysis
Heron, K. H.
1992-01-01
Statistical Energy Analysis (SEA) has traditionally been developed using modal summation and averaging approach, and has led to the need for many restrictive SEA assumptions. The assumption of 'weak coupling' is particularly unacceptable when attempts are made to apply SEA to structural coupling. It is now believed that this assumption is more a function of the modal formulation rather than a necessary formulation of SEA. The present analysis ignores this restriction and describes a wave approach to the calculation of plate-plate coupling loss factors. Predictions based on this method are compared with results obtained from experiments using point excitation on one side of an irregular six-sided box structure. Conclusions show that the use and calculation of infinite transmission coefficients is the way forward for the development of a purely predictive SEA code.
STATISTICS, Program System for Statistical Analysis of Experimental Data
International Nuclear Information System (INIS)
Helmreich, F.
1991-01-01
1 - Description of problem or function: The package is composed of 83 routines, the most important of which are the following: BINDTR: Binomial distribution; HYPDTR: Hypergeometric distribution; POIDTR: Poisson distribution; GAMDTR: Gamma distribution; BETADTR: Beta-1 and Beta-2 distributions; NORDTR: Normal distribution; CHIDTR: Chi-square distribution; STUDTR : Distribution of 'Student's T'; FISDTR: Distribution of F; EXPDTR: Exponential distribution; WEIDTR: Weibull distribution; FRAKTIL: Calculation of the fractiles of the normal, chi-square, Student's, and F distributions; VARVGL: Test for equality of variance for several sample observations; ANPAST: Kolmogorov-Smirnov test and chi-square test of goodness of fit; MULIRE: Multiple linear regression analysis for a dependent variable and a set of independent variables; STPRG: Performs a stepwise multiple linear regression analysis for a dependent variable and a set of independent variables. At each step, the variable entered into the regression equation is the one which has the greatest amount of variance between it and the dependent variable. Any independent variable can be forced into or deleted from the regression equation, irrespective of its contribution to the equation. LTEST: Tests the hypotheses of linearity of the data. SPRANK: Calculates the Spearman rank correlation coefficient. 2 - Method of solution: VARVGL: The Bartlett's Test, the Cochran's Test and the Hartley's Test are performed in the program. MULIRE: The Gauss-Jordan method is used in the solution of the normal equations. STPRG: The abbreviated Doolittle method is used to (1) determine variables to enter into the regression, and (2) complete regression coefficient calculation. 3 - Restrictions on the complexity of the problem: VARVGL: The Hartley's Test is only performed if the sample observations are all of the same size
Statistical mechanics of complex neural systems and high dimensional data
International Nuclear Information System (INIS)
Advani, Madhu; Lahiri, Subhaneil; Ganguli, Surya
2013-01-01
Recent experimental advances in neuroscience have opened new vistas into the immense complexity of neuronal networks. This proliferation of data challenges us on two parallel fronts. First, how can we form adequate theoretical frameworks for understanding how dynamical network processes cooperate across widely disparate spatiotemporal scales to solve important computational problems? Second, how can we extract meaningful models of neuronal systems from high dimensional datasets? To aid in these challenges, we give a pedagogical review of a collection of ideas and theoretical methods arising at the intersection of statistical physics, computer science and neurobiology. We introduce the interrelated replica and cavity methods, which originated in statistical physics as powerful ways to quantitatively analyze large highly heterogeneous systems of many interacting degrees of freedom. We also introduce the closely related notion of message passing in graphical models, which originated in computer science as a distributed algorithm capable of solving large inference and optimization problems involving many coupled variables. We then show how both the statistical physics and computer science perspectives can be applied in a wide diversity of contexts to problems arising in theoretical neuroscience and data analysis. Along the way we discuss spin glasses, learning theory, illusions of structure in noise, random matrices, dimensionality reduction and compressed sensing, all within the unified formalism of the replica method. Moreover, we review recent conceptual connections between message passing in graphical models, and neural computation and learning. Overall, these ideas illustrate how statistical physics and computer science might provide a lens through which we can uncover emergent computational functions buried deep within the dynamical complexities of neuronal networks. (paper)
Statistical analysis of tourism destination competitiveness
Directory of Open Access Journals (Sweden)
Attilio Gardini
2013-05-01
Full Text Available The growing relevance of tourism industry for modern advanced economies has increased the interest among researchers and policy makers in the statistical analysis of destination competitiveness. In this paper we outline a new model of destination competitiveness based on sound theoretical grounds and we develop a statistical test of the model on sample data based on Italian tourist destination decisions and choices. Our model focuses on the tourism decision process which starts from the demand schedule for holidays and ends with the choice of a specific holiday destination. The demand schedule is a function of individual preferences and of destination positioning, while the final decision is a function of the initial demand schedule and the information concerning services for accommodation and recreation in the selected destinations. Moreover, we extend previous studies that focused on image or attributes (such as climate and scenery by paying more attention to the services for accommodation and recreation in the holiday destinations. We test the proposed model using empirical data collected from a sample of 1.200 Italian tourists interviewed in 2007 (October - December. Data analysis shows that the selection probability for the destination included in the consideration set is not proportional to the share of inclusion because the share of inclusion is determined by the brand image, while the selection of the effective holiday destination is influenced by the real supply conditions. The analysis of Italian tourists preferences underline the existence of a latent demand for foreign holidays which points out a risk of market share reduction for Italian tourism system in the global market. We also find a snow ball effect which helps the most popular destinations, mainly in the northern Italian regions.
From statistic mechanic outside equilibrium to transport equations
International Nuclear Information System (INIS)
Balian, R.
1995-01-01
This lecture notes give a synthetic view on the foundations of non-equilibrium statistical mechanics. The purpose is to establish the transport equations satisfied by the relevant variables, starting from the microscopic dynamics. The Liouville representation is introduced, and a projection associates with any density operator , for given choice of relevant observables, a reduced density operator. An exact integral-differential equation for the relevant variables is thereby derived. A short-memory approximation then yields the transport equations. A relevant entropy which characterizes the coarseness of the description is associated with each level of description. As an illustration, the classical gas, with its three levels of description and with the Chapman-Enskog method, is discussed. (author). 3 figs., 5 refs
Statistical mechanics of lattice systems a concrete mathematical introduction
Friedli, Sacha
2017-01-01
This motivating textbook gives a friendly, rigorous introduction to fundamental concepts in equilibrium statistical mechanics, covering a selection of specific models, including the Curie–Weiss and Ising models, the Gaussian free field, O(n) models, and models with Kać interactions. Using classical concepts such as Gibbs measures, pressure, free energy, and entropy, the book exposes the main features of the classical description of large systems in equilibrium, in particular the central problem of phase transitions. It treats such important topics as the Peierls argument, the Dobrushin uniqueness, Mermin–Wagner and Lee–Yang theorems, and develops from scratch such workhorses as correlation inequalities, the cluster expansion, Pirogov–Sinai Theory, and reflection positivity. Written as a self-contained course for advanced undergraduate or beginning graduate students, the detailed explanations, large collection of exercises (with solutions), and appendix of mathematical results and concepts also make i...
Anomalous behavior of q-averages in nonextensive statistical mechanics
International Nuclear Information System (INIS)
Abe, Sumiyoshi
2009-01-01
A generalized definition of average, termed the q-average, is widely employed in the field of nonextensive statistical mechanics. Recently, it has however been pointed out that such an average value may behave unphysically under specific deformations of probability distributions. Here, the following three issues are discussed and clarified. Firstly, the deformations considered are physical and may be realized experimentally. Secondly, in view of the thermostatistics, the q-average is unstable in both finite and infinite discrete systems. Thirdly, a naive generalization of the discussion to continuous systems misses a point, and a norm better than the L 1 -norm should be employed for measuring the distance between two probability distributions. Consequently, stability of the q-average is shown not to be established in all of the cases
Statistical mechanics of the interacting Yang-Mills instanton gas
International Nuclear Information System (INIS)
Ilgenfritz, E.-M.; Mueller-Preussker, M.
1980-01-01
Within the framework of the dilute gas approximation the instanton gas with dipole-like interaction is studied, including hard-core repulsion necessarily implied by the consistency of this approximation. A new, selfconsistent scheme is obtained of instanton calculations provided by a cooperative suppression of large instantons instead of the usual ad hoc infrared cut-off. Diluteness is better under control by a single, regularization prescription independent parameter. Functional methods known from statistical mechanics are used to treat the hard-core and dipole interactions simultaneously. The permeability of the instanton gas is calculated and used to discuss the Gell-Mann-Low β-function in the intermediate coupling range. The results are confronted with recent lattice calculations
On the statistical mechanics of species abundance distributions.
Bowler, Michael G; Kelly, Colleen K
2012-09-01
A central issue in ecology is that of the factors determining the relative abundance of species within a natural community. The proper application of the principles of statistical physics to species abundance distributions (SADs) shows that simple ecological properties could account for the near universal features observed. These properties are (i) a limit on the number of individuals in an ecological guild and (ii) per capita birth and death rates. They underpin the neutral theory of Hubbell (2001), the master equation approach of Volkov et al. (2003, 2005) and the idiosyncratic (extreme niche) theory of Pueyo et al. (2007); they result in an underlying log series SAD, regardless of neutral or niche dynamics. The success of statistical mechanics in this application implies that communities are in dynamic equilibrium and hence that niches must be flexible and that temporal fluctuations on all sorts of scales are likely to be important in community structure. Copyright © 2012 Elsevier Inc. All rights reserved.
To the problem of the statistical basis of evaluation of the mechanical safety factor
International Nuclear Information System (INIS)
Tsyganov, S.V.
2009-01-01
The methodology applied for the safety factor assessment of the WWER fuel cycles uses methods and terms of statistics. Value of the factor is calculated on the basis of estimation of probability to meet predefined limits. Such approach demands the special attention to the statistical properties of parameters of interest. Considering the mechanical constituents of the engineering factor it is assumed uncertainty factors of safety parameters are stochastic values. It characterized by probabilistic distributions that can be unknown. Traditionally in the safety factor assessment process the unknown parameters are estimated from the conservative points of view. This paper analyses how the refinement of the factors distribution parameters is important for the assessment of the mechanical safety factor. For the analysis the statistical approach is applied for modelling of different type of factor probabilistic distributions. It is shown the significant influence of the shape and parameters of distributions for some factors on the value of mechanical safety factor. (Authors)
To the problem of the statistical basis of evaluation of the mechanical safety factor
International Nuclear Information System (INIS)
Tsyganov, S.
2009-01-01
The methodology applied for the safety factor assessment of the VVER fuel cycles uses methods and terms of statistics. Value of the factor is calculated on the basis of estimation of probability to meet predefined limits. Such approach demands the special attention to the statistical properties of parameters of interest. Considering the mechanical constituents of the engineering factor it is assumed uncertainty factors of safety parameters are stochastic values. It characterized by probabilistic distributions that can be unknown. Traditionally in the safety factor assessment process the unknown parameters are estimated from the conservative points of view. This paper analyses how the refinement of the factors distribution parameters is important for the assessment of the mechanical safety factor. For the analysis the statistical approach is applied for modelling of different type of factor probabilistic distributions. It is shown the significant influence of the shape and parameters of distributions for some factors on the value of mechanical safety factor. (author)
Multivariate statistical analysis of wildfires in Portugal
Costa, Ricardo; Caramelo, Liliana; Pereira, Mário
2013-04-01
Several studies demonstrate that wildfires in Portugal present high temporal and spatial variability as well as cluster behavior (Pereira et al., 2005, 2011). This study aims to contribute to the characterization of the fire regime in Portugal with the multivariate statistical analysis of the time series of number of fires and area burned in Portugal during the 1980 - 2009 period. The data used in the analysis is an extended version of the Rural Fire Portuguese Database (PRFD) (Pereira et al, 2011), provided by the National Forest Authority (Autoridade Florestal Nacional, AFN), the Portuguese Forest Service, which includes information for more than 500,000 fire records. There are many multiple advanced techniques for examining the relationships among multiple time series at the same time (e.g., canonical correlation analysis, principal components analysis, factor analysis, path analysis, multiple analyses of variance, clustering systems). This study compares and discusses the results obtained with these different techniques. Pereira, M.G., Trigo, R.M., DaCamara, C.C., Pereira, J.M.C., Leite, S.M., 2005: "Synoptic patterns associated with large summer forest fires in Portugal". Agricultural and Forest Meteorology. 129, 11-25. Pereira, M. G., Malamud, B. D., Trigo, R. M., and Alves, P. I.: The history and characteristics of the 1980-2005 Portuguese rural fire database, Nat. Hazards Earth Syst. Sci., 11, 3343-3358, doi:10.5194/nhess-11-3343-2011, 2011 This work is supported by European Union Funds (FEDER/COMPETE - Operational Competitiveness Programme) and by national funds (FCT - Portuguese Foundation for Science and Technology) under the project FCOMP-01-0124-FEDER-022692, the project FLAIR (PTDC/AAC-AMB/104702/2008) and the EU 7th Framework Program through FUME (contract number 243888).
A statistical analysis of electrical cerebral activity
International Nuclear Information System (INIS)
Bassant, Marie-Helene
1971-01-01
The aim of this work was to study the statistical properties of the amplitude of the electroencephalographic signal. The experimental method is described (implantation of electrodes, acquisition and treatment of data). The program of the mathematical analysis is given (calculation of probability density functions, study of stationarity) and the validity of the tests discussed. The results concerned ten rabbits. Trips of EEG were sampled during 40 s. with very short intervals (500 μs). The probability density functions established for different brain structures (especially the dorsal hippocampus) and areas, were compared during sleep, arousal and visual stimulus. Using a Χ 2 test, it was found that the Gaussian distribution assumption was rejected in 96.7 per cent of the cases. For a given physiological state, there was no mathematical reason to reject the assumption of stationarity (in 96 per cent of the cases). (author) [fr
Statistical analysis of ultrasonic measurements in concrete
Chiang, Chih-Hung; Chen, Po-Chih
2002-05-01
Stress wave techniques such as measurements of ultrasonic pulse velocity are often used to evaluate concrete quality in structures. For proper interpretation of measurement results, the dependence of pulse transit time on the average acoustic impedance and the material homogeneity along the sound path need to be examined. Semi-direct measurement of pulse velocity could be more convenient than through transmission measurement. It is not necessary to assess both sides of concrete floors or walls. A novel measurement scheme is proposed and verified based on statistical analysis. It is shown that Semi-direct measurements are very effective for gathering large amount of pulse velocity data from concrete reference specimens. The variability of measurements is comparable with that reported by American Concrete Institute using either break-off or pullout tests.
Statistical mechanics view of quantum chromodynamics: Lattice gauge theory
International Nuclear Information System (INIS)
Kogut, J.B.
1984-01-01
Recent developments in lattice gauge theory are discussed from a statistial mechanics viewpoint. The basic physics problems of quantum chromodynamics (QCD) are reviewed for an audience of critical phenomena theorists. The idea of local gauge symmetry and color, the connection between statistical mechanics and field theory, asymptotic freedom and the continuum limit of lattice gauge theories, and the order parameters (confinement and chiral symmetry) of QCD are reviewed. Then recent developments in the field are discussed. These include the proof of confinement in the lattice theory, numerical evidence for confinement in the continuum limit of lattice gauge theory, and perturbative improvement programs for lattice actions. Next, we turn to the new challenges facing the subject. These include the need for a better understanding of the lattice Dirac equation and recent progress in the development of numerical methods for fermions (the pseudofermion stochastic algorithm and the microcanonical, molecular dynamics equation of motion approach). Finally, some of the applications of lattice gauge theory to QCD spectrum calculations and the thermodynamics of QCD will be discussed and a few remarks concerning future directions of the field will be made
Statistical Analysis of Data for Timber Strengths
DEFF Research Database (Denmark)
Sørensen, John Dalsgaard; Hoffmeyer, P.
Statistical analyses are performed for material strength parameters from approximately 6700 specimens of structural timber. Non-parametric statistical analyses and fits to the following distributions types have been investigated: Normal, Lognormal, 2 parameter Weibull and 3-parameter Weibull...
On two methods of statistical image analysis
Missimer, J; Knorr, U; Maguire, RP; Herzog, H; Seitz, RJ; Tellman, L; Leenders, K.L.
1999-01-01
The computerized brain atlas (CBA) and statistical parametric mapping (SPM) are two procedures for voxel-based statistical evaluation of PET activation studies. Each includes spatial standardization of image volumes, computation of a statistic, and evaluation of its significance. In addition,
Application of descriptive statistics in analysis of experimental data
Mirilović Milorad; Pejin Ivana
2008-01-01
Statistics today represent a group of scientific methods for the quantitative and qualitative investigation of variations in mass appearances. In fact, statistics present a group of methods that are used for the accumulation, analysis, presentation and interpretation of data necessary for reaching certain conclusions. Statistical analysis is divided into descriptive statistical analysis and inferential statistics. The values which represent the results of an experiment, and which are the subj...
Statistical analysis in MSW collection performance assessment.
Teixeira, Carlos Afonso; Avelino, Catarina; Ferreira, Fátima; Bentes, Isabel
2014-09-01
The increase of Municipal Solid Waste (MSW) generated over the last years forces waste managers pursuing more effective collection schemes, technically viable, environmentally effective and economically sustainable. The assessment of MSW services using performance indicators plays a crucial role for improving service quality. In this work, we focus on the relevance of regular system monitoring as a service assessment tool. In particular, we select and test a core-set of MSW collection performance indicators (effective collection distance, effective collection time and effective fuel consumption) that highlights collection system strengths and weaknesses and supports pro-active management decision-making and strategic planning. A statistical analysis was conducted with data collected in mixed collection system of Oporto Municipality, Portugal, during one year, a week per month. This analysis provides collection circuits' operational assessment and supports effective short-term municipality collection strategies at the level of, e.g., collection frequency and timetables, and type of containers. Copyright © 2014 Elsevier Ltd. All rights reserved.
Statistics Analysis Measures Painting of Cooling Tower
Directory of Open Access Journals (Sweden)
A. Zacharopoulou
2013-01-01
Full Text Available This study refers to the cooling tower of Megalopolis (construction 1975 and protection from corrosive environment. The maintenance of the cooling tower took place in 2008. The cooling tower was badly damaged from corrosion of reinforcement. The parabolic cooling towers (factory of electrical power are a typical example of construction, which has a special aggressive environment. The protection of cooling towers is usually achieved through organic coatings. Because of the different environmental impacts on the internal and external side of the cooling tower, a different system of paint application is required. The present study refers to the damages caused by corrosion process. The corrosive environments, the application of this painting, the quality control process, the measures and statistics analysis, and the results were discussed in this study. In the process of quality control the following measurements were taken into consideration: (1 examination of the adhesion with the cross-cut test, (2 examination of the film thickness, and (3 controlling of the pull-off resistance for concrete substrates and paintings. Finally, this study refers to the correlations of measurements, analysis of failures in relation to the quality of repair, and rehabilitation of the cooling tower. Also this study made a first attempt to apply the specific corrosion inhibitors in such a large structure.
Statistical characteristics of mechanical heart valve cavitation in accelerated testing.
Wu, Changfu; Hwang, Ned H C; Lin, Yu-Kweng M
2004-07-01
Cavitation damage has been observed on mechanical heart valves (MHVs) undergoing accelerated testing. Cavitation itself can be modeled as a stochastic process, as it varies from beat to beat of the testing machine. This in-vitro study was undertaken to investigate the statistical characteristics of MHV cavitation. A 25-mm St. Jude Medical bileaflet MHV (SJM 25) was tested in an accelerated tester at various pulse rates, ranging from 300 to 1,000 bpm, with stepwise increments of 100 bpm. A miniature pressure transducer was placed near a leaflet tip on the inflow side of the valve, to monitor regional transient pressure fluctuations at instants of valve closure. The pressure trace associated with each beat was passed through a 70 kHz high-pass digital filter to extract the high-frequency oscillation (HFO) components resulting from the collapse of cavitation bubbles. Three intensity-related measures were calculated for each HFO burst: its time span; its local root-mean-square (LRMS) value; and the area enveloped by the absolute value of the HFO pressure trace and the time axis, referred to as cavitation impulse. These were treated as stochastic processes, of which the first-order probability density functions (PDFs) were estimated for each test rate. Both the LRMS value and cavitation impulse were log-normal distributed, and the time span was normal distributed. These distribution laws were consistent at different test rates. The present investigation was directed at understanding MHV cavitation as a stochastic process. The results provide a basis for establishing further the statistical relationship between cavitation intensity and time-evolving cavitation damage on MHV surfaces. These data are required to assess and compare the performance of MHVs of different designs.
The role of angular momentum conservation law in statistical mechanics
Directory of Open Access Journals (Sweden)
I.M. Dubrovskii
2008-12-01
Full Text Available Within the limits of Khinchin ideas [A.Y. Khinchin, Mathematical Foundation of Statistical Mechanics. NY, Ed. Dover, 1949] the importance of momentum and angular momentum conservation laws was analyzed for two cases: for uniform magnetic field and when magnetic field is absent. The law of momentum conservation does not change the density of probability distribution in both cases, just as it is assumed in the conventional theory. It is shown that in systems where the kinetic energy depends only on particle momenta canonically conjugated with Cartesian coordinates being their diagonal quadric form,the angular momentum conservation law changes the density of distribution of the system only in case the full angular momentum of a system is not equal to zero. In the gas of charged particles in a uniform magnetic field the density of distribution also varies if the angular momentum is zero [see Dubrovskii I.M., Condensed Matter Physics, 2206, 9, 23]. Two-dimensional gas of charged particles located within a section of an endless strip filled with gas in magnetic field is considered. Under such conditions the angular momentum is not conserved. Directional particle flows take place close to the strip boundaries, and, as a consequence, the phase trajectory of the considered set of particles does not remain within the limited volume of the phase space. In order to apply a statistical thermodynamics method, it was suggested to consider near-boundary trajectories relative to a reference system that moves uniformly. It was shown that if the diameter of an orbit having average thermal energy is much smaller than a strip width, the corrections to thermodynamic functions are small depending on magnetic field. Only the average velocity of near-boundary particles that form near-boundary electric currents creating the paramagnetic moment turn out to be essential.
Transit safety & security statistics & analysis 2002 annual report (formerly SAMIS)
2004-12-01
The Transit Safety & Security Statistics & Analysis 2002 Annual Report (formerly SAMIS) is a compilation and analysis of mass transit accident, casualty, and crime statistics reported under the Federal Transit Administrations (FTAs) National Tr...
Transit safety & security statistics & analysis 2003 annual report (formerly SAMIS)
2005-12-01
The Transit Safety & Security Statistics & Analysis 2003 Annual Report (formerly SAMIS) is a compilation and analysis of mass transit accident, casualty, and crime statistics reported under the Federal Transit Administrations (FTAs) National Tr...
Statistical analysis of long term spatial and temporal trends of ...
Indian Academy of Sciences (India)
Statistical analysis of long term spatial and temporal trends of temperature ... CGCM3; HadCM3; modified Mann–Kendall test; statistical analysis; Sutlej basin. ... Water Resources Systems Division, National Institute of Hydrology, Roorkee 247 ...
Statistical mechanics of high-density bond percolation
Timonin, P. N.
2018-05-01
High-density (HD) percolation describes the percolation of specific κ -clusters, which are the compact sets of sites each connected to κ nearest filled sites at least. It takes place in the classical patterns of independently distributed sites or bonds in which the ordinary percolation transition also exists. Hence, the study of series of κ -type HD percolations amounts to the description of classical clusters' structure for which κ -clusters constitute κ -cores nested one into another. Such data are needed for description of a number of physical, biological, and information properties of complex systems on random lattices, graphs, and networks. They range from magnetic properties of semiconductor alloys to anomalies in supercooled water and clustering in biological and social networks. Here we present the statistical mechanics approach to study HD bond percolation on an arbitrary graph. It is shown that the generating function for κ -clusters' size distribution can be obtained from the partition function of the specific q -state Potts-Ising model in the q →1 limit. Using this approach we find exact κ -clusters' size distributions for the Bethe lattice and Erdos-Renyi graph. The application of the method to Euclidean lattices is also discussed.
Nonextensive statistical mechanics: a brief review of its present status
Directory of Open Access Journals (Sweden)
CONSTANTINO TSALLIS
2002-09-01
Full Text Available We briefly review the present status of nonextensive statistical mechanics. We focus on (i the central equations of the formalism, (ii the most recent applications in physics and other sciences, (iii the a priori determination (from microscopic dynamics of the entropic index q for two important classes of physical systems, namely low-dimensional maps (both dissipative and conservative and long-range interacting many-body hamiltonian classical systems.Revisamos sumariamente o estado presente da mecânica estatística não-extensiva. Focalizamos em (i as equacões centrais do formalismo; (ii as aplicações mais recentes na física e em outras ciências, (iii a determinação a priori (da dinâmica microscópica do índice entrópico q para duas classes importantes de sistemas físicos, a saber, mapas de baixa dimensão (tanto dissipativos quanto conservativos e sistemas clássicos hamiltonianos de muitos corpos com interações de longo alcance.
Universal biology and the statistical mechanics of early life
Goldenfeld, Nigel; Biancalani, Tommaso; Jafarpour, Farshid
2017-11-01
All known life on the Earth exhibits at least two non-trivial common features: the canonical genetic code and biological homochirality, both of which emerged prior to the Last Universal Common Ancestor state. This article describes recent efforts to provide a narrative of this epoch using tools from statistical mechanics. During the emergence of self-replicating life far from equilibrium in a period of chemical evolution, minimal models of autocatalysis show that homochirality would have necessarily co-evolved along with the efficiency of early-life self-replicators. Dynamical system models of the evolution of the genetic code must explain its universality and its highly refined error-minimization properties. These have both been accounted for in a scenario where life arose from a collective, networked phase where there was no notion of species and perhaps even individuality itself. We show how this phase ultimately terminated during an event sometimes known as the Darwinian transition, leading to the present epoch of tree-like vertical descent of organismal lineages. These examples illustrate concrete examples of universal biology: the quest for a fundamental understanding of the basic properties of living systems, independent of precise instantiation in chemistry or other media. This article is part of the themed issue 'Reconceptualizing the origins of life'.
The statistical mechanics of vortex-acoustic ion wave turbulence
International Nuclear Information System (INIS)
Giles, M.J.
1980-01-01
The equilibrium statistical mechanics of electrostatic ion wave turbulence is studied within the framework of a continuum ion flow with adiabatic electrons. The wave field consists in general of two components, namely ion-acoustic and ion vortex modes. It is shown that the latter can significantly affect the equilibria on account of their ability both to emit and to scatter ion sound. Exact equilibria for the vortex-acoustic wave field are given in terms of a canonical distribution and the correlation functions are expressed in terms of a generating functional. Detailed calculations are carried out for the case in which the dominant coupling is an indirect interaction of the vortex modes mediated by the sound field. An equation for the spectrum of the vortex modes is obtained for this case, which is shown to possess a simple exact solution. This solution shows that the spectrum of fluctuations changes considerably as the total energy increases. Condensed vortex states could occur in the plasma sheet of the earth's magnetosphere and it is shown that the predicted ratio of the mean ion energy to the mean electron energy is consistent with the trend of observed values. (author)
Statistical mechanics approach to 1-bit compressed sensing
International Nuclear Information System (INIS)
Xu, Yingying; Kabashima, Yoshiyuki
2013-01-01
Compressed sensing is a framework that makes it possible to recover an N-dimensional sparse vector x∈R N from its linear transformation y∈R M of lower dimensionality M 1 -norm-based signal recovery scheme for 1-bit compressed sensing using statistical mechanics methods. We show that the signal recovery performance predicted by the replica method under the replica symmetric ansatz, which turns out to be locally unstable for modes breaking the replica symmetry, is in good consistency with experimental results of an approximate recovery algorithm developed earlier. This suggests that the l 1 -based recovery problem typically has many local optima of a similar recovery accuracy, which can be achieved by the approximate algorithm. We also develop another approximate recovery algorithm inspired by the cavity method. Numerical experiments show that when the density of nonzero entries in the original signal is relatively large the new algorithm offers better performance than the abovementioned scheme and does so with a lower computational cost. (paper)
A Simulational approach to teaching statistical mechanics and kinetic theory
International Nuclear Information System (INIS)
Karabulut, H.
2005-01-01
A computer simulation demonstrating how Maxwell-Boltzmann distribution is reached in gases from a nonequilibrium distribution is presented. The algorithm can be generalized to the cases of gas particles (atoms or molecules) with internal degrees of freedom such as electronic excitations and vibrational-rotational energy levels. Another generalization of the algorithm is the case of mixture of two different gases. By choosing the collision cross sections properly one can create quasi equilibrium distributions. For example by choosing same atom cross sections large and different atom cross sections very small one can create mixture of two gases with different temperatures where two gases slowly interact and come to equilibrium in a long time. Similarly, for the case one kind of atom with internal degrees of freedom one can create situations that internal degrees of freedom come to the equilibrium much later than translational degrees of freedom. In all these cases the equilibrium distribution that the algorithm gives is the same as expected from the statistical mechanics. The algorithm can also be extended to cover the case of chemical equilibrium where species A and B react to form AB molecules. The laws of chemical equilibrium can be observed from this simulation. The chemical equilibrium simulation can also help to teach the elusive concept of chemical potential
An Introduction to Thermodynamics and Statistical Mechanics - 2nd Edition
Stowe, Keith
2003-03-01
This introductory textbook for standard undergraduate courses in thermodynamics has been completely rewritten. Starting with an overview of important quantum behaviours, the book teaches students how to calculate probabilities, in order to provide a firm foundation for later chapters. It introduces the ideas of classical thermodynamics and explores them both in general and as they are applied to specific processes and interactions. The remainder of the book deals with statistical mechanics - the study of small systems interacting with huge reservoirs. The changes to this second edition have been made after more than 10 years classroom testing and student feedback. Each topic ends with a boxed summary of ideas and results, and every chapter contains numerous homework problems, covering a broad range of difficulties. Answers are given to odd numbered problems, and solutions to even problems are available to instructors at www.cambridge.org/9780521865579. The entire book has been re-written and now covers more topics It has a greater number of homework problems which range in difficulty from warm-ups to challenges It is concise and has an easy reading style
Statistical and stochastic aspects of the delocalization problem in quantum mechanics
International Nuclear Information System (INIS)
Claverie, P.; Diner, S.
1976-01-01
The space-time behaviour of electrons in atoms and molecules is reviewed. The wave conception of the electron is criticized and the poverty of the non-reductionist attitude is underlined. Further, the two main interpretations of quantum mechanics are recalled: the Copenhagen and the Statistical Interpretations. The meaning and the successes of the Statistical Interpretation are explained and it is shown that it does not solve all problems because quantum mechanics is irreducible to a classical statistical theory. The fluctuation of the particle number and its relationship to loge theory, delocalization and correlation is studied. Finally, different stochastic models for microphysics are reviewed. The markovian Fenyes-Nelson process allows an interpretation of the original heuristic considerations of Schroedinger. Non-markov processes with Schroedinger time evolution are shown to be equivalent to the base state analysis of Feynmann but they are unsatisfactory from a probabilistic point of view. Stochastic electrodynamics is presented as the most satisfactory conception nowadays
Statistical mechanics of sensing and communications: Insights and techniques
International Nuclear Information System (INIS)
Murayama, T; Davis, P
2008-01-01
In this article we review a basic model for analysis of large sensor networks from the point of view of collective estimation under bandwidth constraints. We compare different sensing aggregation levels as alternative 'strategies' for collective estimation: moderate aggregation from a moderate number of sensors for which communication bandwidth is enough that data encoding can be reversible, and large scale aggregation from very many sensors - in which case communication bandwidth constraints require the use of nonreversible encoding. We show the non-trivial trade-off between sensing quality, which can be increased by increasing the number of sensors, and communication quality under bandwidth constraints, which decreases if the number of sensors is too large. From a practical standpoint, we verify that such a trade-off exists in constructively defined communications schemes. We introduce a probabilistic encoding scheme and define rate distortion models that are suitable for analysis of the large network limit. Our description shows that the methods and ideas from statistical physics can play an important role in formulating effective models for such schemes
Statistical approach to partial equilibrium analysis
Wang, Yougui; Stanley, H. E.
2009-04-01
A statistical approach to market equilibrium and efficiency analysis is proposed in this paper. One factor that governs the exchange decisions of traders in a market, named willingness price, is highlighted and constitutes the whole theory. The supply and demand functions are formulated as the distributions of corresponding willing exchange over the willingness price. The laws of supply and demand can be derived directly from these distributions. The characteristics of excess demand function are analyzed and the necessary conditions for the existence and uniqueness of equilibrium point of the market are specified. The rationing rates of buyers and sellers are introduced to describe the ratio of realized exchange to willing exchange, and their dependence on the market price is studied in the cases of shortage and surplus. The realized market surplus, which is the criterion of market efficiency, can be written as a function of the distributions of willing exchange and the rationing rates. With this approach we can strictly prove that a market is efficient in the state of equilibrium.
Analysis of Variance: What Is Your Statistical Software Actually Doing?
Li, Jian; Lomax, Richard G.
2011-01-01
Users assume statistical software packages produce accurate results. In this article, the authors systematically examined Statistical Package for the Social Sciences (SPSS) and Statistical Analysis System (SAS) for 3 analysis of variance (ANOVA) designs, mixed-effects ANOVA, fixed-effects analysis of covariance (ANCOVA), and nested ANOVA. For each…
Maximum entropy principle and hydrodynamic models in statistical mechanics
International Nuclear Information System (INIS)
Trovato, M.; Reggiani, L.
2012-01-01
This review presents the state of the art of the maximum entropy principle (MEP) in its classical and quantum (QMEP) formulation. Within the classical MEP we overview a general theory able to provide, in a dynamical context, the macroscopic relevant variables for carrier transport in the presence of electric fields of arbitrary strength. For the macroscopic variables the linearized maximum entropy approach is developed including full-band effects within a total energy scheme. Under spatially homogeneous conditions, we construct a closed set of hydrodynamic equations for the small-signal (dynamic) response of the macroscopic variables. The coupling between the driving field and the energy dissipation is analyzed quantitatively by using an arbitrary number of moments of the distribution function. Analogously, the theoretical approach is applied to many one-dimensional n + nn + submicron Si structures by using different band structure models, different doping profiles, different applied biases and is validated by comparing numerical calculations with ensemble Monte Carlo simulations and with available experimental data. Within the quantum MEP we introduce a quantum entropy functional of the reduced density matrix, the principle of quantum maximum entropy is then asserted as fundamental principle of quantum statistical mechanics. Accordingly, we have developed a comprehensive theoretical formalism to construct rigorously a closed quantum hydrodynamic transport within a Wigner function approach. The theory is formulated both in thermodynamic equilibrium and nonequilibrium conditions, and the quantum contributions are obtained by only assuming that the Lagrange multipliers can be expanded in powers of ħ 2 , being ħ the reduced Planck constant. In particular, by using an arbitrary number of moments, we prove that: i) on a macroscopic scale all nonlocal effects, compatible with the uncertainty principle, are imputable to high-order spatial derivatives both of the
Statistical mechanics of polymer networks of any topology
International Nuclear Information System (INIS)
Duplantier, B.
1989-01-01
The statistical mechanics is considered of any polymer network with a prescribed topology, in dimension d, which was introduced previously. The basic direct renormalization theory of the associated continuum model is established. It has a very simple multiplicative structure in terms of the partition functions of the star polymers constituting the vertices of the network. A calculation is made to O(ε 2 ), where d = 4 -ε, of the basic critical dimensions σ L associated with any L=leg vertex (L ≥ 1). From this infinite series of critical exponents, any topology-dependent critical exponent can be derived. This is applied to the configuration exponent γ G of any network G to O(ε 2 ), including L-leg star polymers. The infinite sets of contact critical exponents θ between multiple points of polymers or between the cores of several star polymers are also deduced. As a particular case, the three exponents θ 0 , θ 1 , θ 2 calculated by des Cloizeaux by field-theoretic methods are recovered. The limiting exact logarithmic laws are derived at the upper critical dimension d = 4. The results are generalized to the series of topological exponents of polymer networks near a surface and of tricritical polymers at the Θ-point. Intersection properties of networks of random walks can be studied similarly. The above factorization theory of the partition function of any polymer network over its constituting L-vertices also applies to two dimensions, where it can be related to conformal invariance. The basic critical exponents σ L and thus any topological polymer exponents are then exactly known. Principal results published elsewhere are recalled
On some boundary value problems in quantum statistical mechanics
International Nuclear Information System (INIS)
Angelescu, N.
1978-01-01
The following two topics of equilibrium quantum statistical mechanics are discussed in this thesis: (i) the independence of the thermodynamic limit of grand-canonical pressure on the boundary conditions; (ii) the magnetic properties of free quantum gases. Problem (i) is handled with a functional integration technique. Wiener-type conditional measures are constructed for a given domain and a general class of mixed conditions on its boundary, these measures are used to write down Feynman-Kac formulae for the kernels of exp(-βH), where H is the Hamiltonian of N interacting particles in the given domain. These measures share the property that they assign the same mass as the usual Wiener measure to any set of trajectories not intersecting the boundary. Local estimates on the kernels of exp(-βH) are derived, which imply independence of the pressure on the boundary conditions in the thermodynamic limit. Problem (ii) has a historical development: since Landau's work (1930), much discussion has been devoted to the influence of the finite size on the susceptibility. In finite volume, Dirichlet boundary conditions are imposed, on the ground that they ensure gauge invariance. The thermodynamic limit of the pressure is proved, using again functional integration. The functional measure is now complex but absolutely continuous with respect to Wiener measure, so the usual local estimates hold true. The controversy in the literature was concentrated on the commutativity of the operations of H-derivation and thermodynamic limit, so the existence of this limit for the zero-field susceptibility and its surface term are proved separately, demonstrating this commutativity. The proof relies on the following result of independent interest: the perturbation theory of self-adjoint trace-class semigroups is trace-class convergent and analytic. (author)
Statistical analysis of angular correlation measurements
International Nuclear Information System (INIS)
Oliveira, R.A.A.M. de.
1986-01-01
Obtaining the multipole mixing ratio, δ, of γ transitions in angular correlation measurements is a statistical problem characterized by the small number of angles in which the observation is made and by the limited statistic of counting, α. The inexistence of a sufficient statistics for the estimator of δ, is shown. Three different estimators for δ were constructed and their properties of consistency, bias and efficiency were tested. Tests were also performed in experimental results obtained in γ-γ directional correlation measurements. (Author) [pt
Surface Properties of TNOs: Preliminary Statistical Analysis
Antonieta Barucci, Maria; Fornasier, S.; Alvarez-Cantal, A.; de Bergh, C.; Merlin, F.; DeMeo, F.; Dumas, C.
2009-09-01
An overview of the surface properties based on the last results obtained during the Large Program performed at ESO-VLT (2007-2008) will be presented. Simultaneous high quality visible and near-infrared spectroscopy and photometry have been carried out on 40 objects with various dynamical properties, using FORS1 (V), ISAAC (J) and SINFONI (H+K bands) mounted respectively at UT2, UT1 and UT4 VLT-ESO telescopes (Cerro Paranal, Chile). For spectroscopy we computed the spectral slope for each object and searched for possible rotational inhomogeneities. A few objects show features in their visible spectra such as Eris, whose spectral bands are displaced with respect to pure methane-ice. We identify new faint absorption features on 10199 Chariklo and 42355 Typhon, possibly due to the presence of aqueous altered materials. The H+K band spectroscopy was performed with the new instrument SINFONI which is a 3D integral field spectrometer. While some objects show no diagnostic spectral bands, others reveal surface deposits of ices of H2O, CH3OH, CH4, and N2. To investigate the surface properties of these bodies, a radiative transfer model has been applied to interpret the entire 0.4-2.4 micron spectral region. The diversity of the spectra suggests that these objects represent a substantial range of bulk compositions. These different surface compositions can be diagnostic of original compositional diversity, interior source and/or different evolution with different physical processes affecting the surfaces. A statistical analysis is in progress to investigate the correlation of the TNOs’ surface properties with size and dynamical properties.
Time Series Analysis Based on Running Mann Whitney Z Statistics
A sensitive and objective time series analysis method based on the calculation of Mann Whitney U statistics is described. This method samples data rankings over moving time windows, converts those samples to Mann-Whitney U statistics, and then normalizes the U statistics to Z statistics using Monte-...
COMPARATIVE STATISTICAL ANALYSIS OF GENOTYPES’ COMBINING
Directory of Open Access Journals (Sweden)
V. Z. Stetsyuk
2015-05-01
The program provides the creation of desktop program complex for statistics calculations on a personal computer of doctor. Modern methods and tools for development of information systems were described to create program.
Shinzato, Takashi
2016-12-01
The portfolio optimization problem in which the variances of the return rates of assets are not identical is analyzed in this paper using the methodology of statistical mechanical informatics, specifically, replica analysis. We defined two characteristic quantities of an optimal portfolio, namely, minimal investment risk and investment concentration, in order to solve the portfolio optimization problem and analytically determined their asymptotical behaviors using replica analysis. Numerical experiments were also performed, and a comparison between the results of our simulation and those obtained via replica analysis validated our proposed method.
Statistical Analysis of Research Data | Center for Cancer Research
Recent advances in cancer biology have resulted in the need for increased statistical analysis of research data. The Statistical Analysis of Research Data (SARD) course will be held on April 5-6, 2018 from 9 a.m.-5 p.m. at the National Institutes of Health's Natcher Conference Center, Balcony C on the Bethesda Campus. SARD is designed to provide an overview on the general principles of statistical analysis of research data. The first day will feature univariate data analysis, including descriptive statistics, probability distributions, one- and two-sample inferential statistics.
Counting in Lattices: Combinatorial Problems from Statistical Mechanics.
Randall, Dana Jill
In this thesis we consider two classical combinatorial problems arising in statistical mechanics: counting matchings and self-avoiding walks in lattice graphs. The first problem arises in the study of the thermodynamical properties of monomers and dimers (diatomic molecules) in crystals. Fisher, Kasteleyn and Temperley discovered an elegant technique to exactly count the number of perfect matchings in two dimensional lattices, but it is not applicable for matchings of arbitrary size, or in higher dimensional lattices. We present the first efficient approximation algorithm for computing the number of matchings of any size in any periodic lattice in arbitrary dimension. The algorithm is based on Monte Carlo simulation of a suitable Markov chain and has rigorously derived performance guarantees that do not rely on any assumptions. In addition, we show that these results generalize to counting matchings in any graph which is the Cayley graph of a finite group. The second problem is counting self-avoiding walks in lattices. This problem arises in the study of the thermodynamics of long polymer chains in dilute solution. While there are a number of Monte Carlo algorithms used to count self -avoiding walks in practice, these are heuristic and their correctness relies on unproven conjectures. In contrast, we present an efficient algorithm which relies on a single, widely-believed conjecture that is simpler than preceding assumptions and, more importantly, is one which the algorithm itself can test. Thus our algorithm is reliable, in the sense that it either outputs answers that are guaranteed, with high probability, to be correct, or finds a counterexample to the conjecture. In either case we know we can trust our results and the algorithm is guaranteed to run in polynomial time. This is the first algorithm for counting self-avoiding walks in which the error bounds are rigorously controlled. This work was supported in part by an AT&T graduate fellowship, a University of
Statistical network analysis for analyzing policy networks
DEFF Research Database (Denmark)
Robins, Garry; Lewis, Jenny; Wang, Peng
2012-01-01
and policy network methodology is the development of statistical modeling approaches that can accommodate such dependent data. In this article, we review three network statistical methods commonly used in the current literature: quadratic assignment procedures, exponential random graph models (ERGMs......To analyze social network data using standard statistical approaches is to risk incorrect inference. The dependencies among observations implied in a network conceptualization undermine standard assumptions of the usual general linear models. One of the most quickly expanding areas of social......), and stochastic actor-oriented models. We focus most attention on ERGMs by providing an illustrative example of a model for a strategic information network within a local government. We draw inferences about the structural role played by individuals recognized as key innovators and conclude that such an approach...
Statistical models and methods for reliability and survival analysis
Couallier, Vincent; Huber-Carol, Catherine; Mesbah, Mounir; Huber -Carol, Catherine; Limnios, Nikolaos; Gerville-Reache, Leo
2013-01-01
Statistical Models and Methods for Reliability and Survival Analysis brings together contributions by specialists in statistical theory as they discuss their applications providing up-to-date developments in methods used in survival analysis, statistical goodness of fit, stochastic processes for system reliability, amongst others. Many of these are related to the work of Professor M. Nikulin in statistics over the past 30 years. The authors gather together various contributions with a broad array of techniques and results, divided into three parts - Statistical Models and Methods, Statistical
Application of nonequilibrium quantum statistical mechanics to homogeneous nucleation
International Nuclear Information System (INIS)
Larson, A.R.; Cantrell, C.D.
1978-01-01
The master equation for cluster growth and evaporation is derived from many-body quantum mechanics and from a modified version of quantum damping theory used in laser physics. For application to nucleation theory, the quantum damping theory has been generalized to include system and reservoir states that are not separate entities. Formulae for rate constants are obtained. Solutions of the master equation yield equations of state and system-averaged quantities recognized as thermodynamic variables. Formulae for Helmholtz free energies of clusters in a Debye approximation are derived. Coexistence-line equations for pressure volume, and number of clusters are obtained from equations-of-state analysis. Coexistence-line and surface-tension data are used to obtain values of parameters for the Debye approximation. These data are employed in calculating both the nucleation current in diffusion cloud chamber experiments and the onset of condensation in expansion nozzle experiments. Theoretical and experimental results are similar for both cloud-chamber and nozzle experiments, which measure water
Homogeneous nucleation: a problem in nonequilibrium quantum statistical mechanics
International Nuclear Information System (INIS)
1978-08-01
The master equation for cluster growth and evaporation is derived for many-body quantum mechanics and from a modified version of quantum damping theory used in laser physics. For application to nucleation theory, the quantum damping theory is generalized to include system and reservoir states that are not separate entities. Formulas for rate constants are obtained. Solutions of the master equation yield equations of state and system-averaged quantities recognized as thermodynamic variables. Formulas for Helmholtz free energies of clusters in a Debye approximation are derived. Coexistence-line equations for pressure, volume, and number of clusters are obtained from equations-of-state analysis. Coexistence-line and surface-tension data are used to obtain values of parameters for the Debye approximation. These data are employed in calculating both the nucleation current in diffusion cloud chamber experiments and the onset of condensation in expansion nozzle experiments. Theoretical and experimental results are similar for both cloud chamber and nozzle experiments, which measure water. Comparison with other theories reveals that classical theory only accidently agrees with experiment and that the Helmholtz free-energy formula used in the Lothe--Pound theory is incomplete. 27 figures, 3 tables, 149 references
Statistical analysis of hydrodynamic cavitation events
Gimenez, G.; Sommer, R.
1980-10-01
The frequency (number of events per unit time) of pressure pulses produced by hydrodynamic cavitation bubble collapses is investigated using statistical methods. The results indicate that this frequency is distributed according to a normal law, its parameters not being time-evolving.
Statistical analysis of lineaments of Goa, India
Digital Repository Service at National Institute of Oceanography (India)
Iyer, S.D.; Banerjee, G.; Wagle, B.G.
statistically to obtain the nonlinear pattern in the form of a cosine wave. Three distinct peaks were found at azimuths of 40-45 degrees, 90-95 degrees and 140-145 degrees, which have peak values of 5.85, 6.80 respectively. These three peaks are correlated...
On statistical analysis of compound point process
Czech Academy of Sciences Publication Activity Database
Volf, Petr
2006-01-01
Roč. 35, 2-3 (2006), s. 389-396 ISSN 1026-597X R&D Projects: GA ČR(CZ) GA402/04/1294 Institutional research plan: CEZ:AV0Z10750506 Keywords : counting process * compound process * hazard function * Cox -model Subject RIV: BB - Applied Statistics, Operational Research
Statistical Analysis Of Reconnaissance Geochemical Data From ...
African Journals Online (AJOL)
, Co, Mo, Hg, Sb, Tl, Sc, Cr, Ni, La, W, V, U, Th, Bi, Sr and Ga in 56 stream sediment samples collected from Orle drainage system were subjected to univariate and multivariate statistical analyses. The univariate methods used include ...
Uncertainty analysis with statistically correlated failure data
International Nuclear Information System (INIS)
Modarres, M.; Dezfuli, H.; Roush, M.L.
1987-01-01
Likelihood of occurrence of the top event of a fault tree or sequences of an event tree is estimated from the failure probability of components that constitute the events of the fault/event tree. Component failure probabilities are subject to statistical uncertainties. In addition, there are cases where the failure data are statistically correlated. At present most fault tree calculations are based on uncorrelated component failure data. This chapter describes a methodology for assessing the probability intervals for the top event failure probability of fault trees or frequency of occurrence of event tree sequences when event failure data are statistically correlated. To estimate mean and variance of the top event, a second-order system moment method is presented through Taylor series expansion, which provides an alternative to the normally used Monte Carlo method. For cases where component failure probabilities are statistically correlated, the Taylor expansion terms are treated properly. Moment matching technique is used to obtain the probability distribution function of the top event through fitting the Johnson Ssub(B) distribution. The computer program, CORRELATE, was developed to perform the calculations necessary for the implementation of the method developed. (author)
Bayesian Sensitivity Analysis of Statistical Models with Missing Data.
Zhu, Hongtu; Ibrahim, Joseph G; Tang, Niansheng
2014-04-01
Methods for handling missing data depend strongly on the mechanism that generated the missing values, such as missing completely at random (MCAR) or missing at random (MAR), as well as other distributional and modeling assumptions at various stages. It is well known that the resulting estimates and tests may be sensitive to these assumptions as well as to outlying observations. In this paper, we introduce various perturbations to modeling assumptions and individual observations, and then develop a formal sensitivity analysis to assess these perturbations in the Bayesian analysis of statistical models with missing data. We develop a geometric framework, called the Bayesian perturbation manifold, to characterize the intrinsic structure of these perturbations. We propose several intrinsic influence measures to perform sensitivity analysis and quantify the effect of various perturbations to statistical models. We use the proposed sensitivity analysis procedure to systematically investigate the tenability of the non-ignorable missing at random (NMAR) assumption. Simulation studies are conducted to evaluate our methods, and a dataset is analyzed to illustrate the use of our diagnostic measures.
Statistical analysis of medical data using SAS
Der, Geoff
2005-01-01
An Introduction to SASDescribing and Summarizing DataBasic InferenceScatterplots Correlation: Simple Regression and SmoothingAnalysis of Variance and CovarianceMultiple RegressionLogistic RegressionThe Generalized Linear ModelGeneralized Additive ModelsNonlinear Regression ModelsThe Analysis of Longitudinal Data IThe Analysis of Longitudinal Data II: Models for Normal Response VariablesThe Analysis of Longitudinal Data III: Non-Normal ResponseSurvival AnalysisAnalysis Multivariate Date: Principal Components and Cluster AnalysisReferences
He, Ping
2012-01-01
The long-standing puzzle surrounding the statistical mechanics of self-gravitating systems has not yet been solved successfully. We formulate a systematic theoretical framework of entropy-based statistical mechanics for spherically symmetric collisionless self-gravitating systems. We use an approach that is very different from that of the conventional statistical mechanics of short-range interaction systems. We demonstrate that the equilibrium states of self-gravitating systems consist of both mechanical and statistical equilibria, with the former characterized by a series of velocity-moment equations and the latter by statistical equilibrium equations, which should be derived from the entropy principle. The velocity-moment equations of all orders are derived from the steady-state collisionless Boltzmann equation. We point out that the ergodicity is invalid for the whole self-gravitating system, but it can be re-established locally. Based on the local ergodicity, using Fermi-Dirac-like statistics, with the non-degenerate condition and the spatial independence of the local microstates, we rederive the Boltzmann-Gibbs entropy. This is consistent with the validity of the collisionless Boltzmann equation, and should be the correct entropy form for collisionless self-gravitating systems. Apart from the usual constraints of mass and energy conservation, we demonstrate that the series of moment or virialization equations must be included as additional constraints on the entropy functional when performing the variational calculus; this is an extension to the original prescription by White & Narayan. Any possible velocity distribution can be produced by the statistical-mechanical approach that we have developed with the extended Boltzmann-Gibbs/White-Narayan statistics. Finally, we discuss the questions of negative specific heat and ensemble inequivalence for self-gravitating systems.
Fundamentals of statistical experimental design and analysis
Easterling, Robert G
2015-01-01
Professionals in all areas - business; government; the physical, life, and social sciences; engineering; medicine, etc. - benefit from using statistical experimental design to better understand their worlds and then use that understanding to improve the products, processes, and programs they are responsible for. This book aims to provide the practitioners of tomorrow with a memorable, easy to read, engaging guide to statistics and experimental design. This book uses examples, drawn from a variety of established texts, and embeds them in a business or scientific context, seasoned with a dash of humor, to emphasize the issues and ideas that led to the experiment and the what-do-we-do-next? steps after the experiment. Graphical data displays are emphasized as means of discovery and communication and formulas are minimized, with a focus on interpreting the results that software produce. The role of subject-matter knowledge, and passion, is also illustrated. The examples do not require specialized knowledge, and t...
Common misconceptions about data analysis and statistics.
Motulsky, Harvey J
2014-11-01
Ideally, any experienced investigator with the right tools should be able to reproduce a finding published in a peer-reviewed biomedical science journal. In fact, the reproducibility of a large percentage of published findings has been questioned. Undoubtedly, there are many reasons for this, but one reason maybe that investigators fool themselves due to a poor understanding of statistical concepts. In particular, investigators often make these mistakes: 1. P-Hacking. This is when you reanalyze a data set in many different ways, or perhaps reanalyze with additional replicates, until you get the result you want. 2. Overemphasis on P values rather than on the actual size of the observed effect. 3. Overuse of statistical hypothesis testing, and being seduced by the word "significant". 4. Overreliance on standard errors, which are often misunderstood.
Common misconceptions about data analysis and statistics.
Motulsky, Harvey J
2015-02-01
Ideally, any experienced investigator with the right tools should be able to reproduce a finding published in a peer-reviewed biomedical science journal. In fact, the reproducibility of a large percentage of published findings has been questioned. Undoubtedly, there are many reasons for this, but one reason may be that investigators fool themselves due to a poor understanding of statistical concepts. In particular, investigators often make these mistakes: (1) P-Hacking. This is when you reanalyze a data set in many different ways, or perhaps reanalyze with additional replicates, until you get the result you want. (2) Overemphasis on P values rather than on the actual size of the observed effect. (3) Overuse of statistical hypothesis testing, and being seduced by the word "significant". (4) Overreliance on standard errors, which are often misunderstood.
Statistical analysis of radioactivity in the environment
International Nuclear Information System (INIS)
Barnes, M.G.; Giacomini, J.J.
1980-05-01
The pattern of radioactivity in surface soils of Area 5 of the Nevada Test Site is analyzed statistically by means of kriging. The 1962 event code-named Smallboy effected the greatest proportion of the area sampled, but some of the area was also affected by a number of other events. The data for this study were collected on a regular grid to take advantage of the efficiency of grid sampling
Critical analysis of adsorption data statistically
Kaushal, Achla; Singh, S. K.
2017-10-01
Experimental data can be presented, computed, and critically analysed in a different way using statistics. A variety of statistical tests are used to make decisions about the significance and validity of the experimental data. In the present study, adsorption was carried out to remove zinc ions from contaminated aqueous solution using mango leaf powder. The experimental data was analysed statistically by hypothesis testing applying t test, paired t test and Chi-square test to (a) test the optimum value of the process pH, (b) verify the success of experiment and (c) study the effect of adsorbent dose in zinc ion removal from aqueous solutions. Comparison of calculated and tabulated values of t and χ 2 showed the results in favour of the data collected from the experiment and this has been shown on probability charts. K value for Langmuir isotherm was 0.8582 and m value for Freundlich adsorption isotherm obtained was 0.725, both are mango leaf powder.
Student Understanding of Taylor Series Expansions in Statistical Mechanics
Smith, Trevor I.; Thompson, John R.; Mountcastle, Donald B.
2013-01-01
One goal of physics instruction is to have students learn to make physical meaning of specific mathematical expressions, concepts, and procedures in different physical settings. As part of research investigating student learning in statistical physics, we are developing curriculum materials that guide students through a derivation of the Boltzmann…
Statistical mechanics of learning: A variational approach for real data
International Nuclear Information System (INIS)
Malzahn, Doerthe; Opper, Manfred
2002-01-01
Using a variational technique, we generalize the statistical physics approach of learning from random examples to make it applicable to real data. We demonstrate the validity and relevance of our method by computing approximate estimators for generalization errors that are based on training data alone
A Statistical Mechanics Approach to Approximate Analytical Bootstrap Averages
DEFF Research Database (Denmark)
Malzahn, Dorthe; Opper, Manfred
2003-01-01
We apply the replica method of Statistical Physics combined with a variational method to the approximate analytical computation of bootstrap averages for estimating the generalization error. We demonstrate our approach on regression with Gaussian processes and compare our results with averages...
Directory of Open Access Journals (Sweden)
Priya Ranganathan
2015-01-01
Full Text Available In the second part of a series on pitfalls in statistical analysis, we look at various ways in which a statistically significant study result can be expressed. We debunk some of the myths regarding the ′P′ value, explain the importance of ′confidence intervals′ and clarify the importance of including both values in a paper
Ranganathan, Priya; Pramesh, C. S.; Buyse, Marc
2015-01-01
In the second part of a series on pitfalls in statistical analysis, we look at various ways in which a statistically significant study result can be expressed. We debunk some of the myths regarding the ‘P’ value, explain the importance of ‘confidence intervals’ and clarify the importance of including both values in a paper PMID:25878958
Tuuli, Methodius G; Odibo, Anthony O
2011-08-01
The objective of this article is to discuss the rationale for common statistical tests used for the analysis and interpretation of prenatal diagnostic imaging studies. Examples from the literature are used to illustrate descriptive and inferential statistics. The uses and limitations of linear and logistic regression analyses are discussed in detail.
Statistical learning methods in high-energy and astrophysics analysis
Energy Technology Data Exchange (ETDEWEB)
Zimmermann, J. [Forschungszentrum Juelich GmbH, Zentrallabor fuer Elektronik, 52425 Juelich (Germany) and Max-Planck-Institut fuer Physik, Foehringer Ring 6, 80805 Munich (Germany)]. E-mail: zimmerm@mppmu.mpg.de; Kiesling, C. [Max-Planck-Institut fuer Physik, Foehringer Ring 6, 80805 Munich (Germany)
2004-11-21
We discuss several popular statistical learning methods used in high-energy- and astro-physics analysis. After a short motivation for statistical learning we present the most popular algorithms and discuss several examples from current research in particle- and astro-physics. The statistical learning methods are compared with each other and with standard methods for the respective application.
Statistical learning methods in high-energy and astrophysics analysis
International Nuclear Information System (INIS)
Zimmermann, J.; Kiesling, C.
2004-01-01
We discuss several popular statistical learning methods used in high-energy- and astro-physics analysis. After a short motivation for statistical learning we present the most popular algorithms and discuss several examples from current research in particle- and astro-physics. The statistical learning methods are compared with each other and with standard methods for the respective application
Statistical analysis of partial reduced width distributions
International Nuclear Information System (INIS)
Tran Quoc Thuong.
1973-01-01
The aim of this study was to develop rigorous methods for analysing experimental event distributions according to a law in chi 2 and to check if the number of degrees of freedom ν is compatible with the value 1 for the reduced neutron width distribution. Two statistical methods were used (the maximum-likelihood method and the method of moments); it was shown, in a few particular cases, that ν is compatible with 1. The difference between ν and 1, if it exists, should not exceed 3%. These results confirm the validity of the compound nucleus model [fr
Statistical analysis of random duration times
International Nuclear Information System (INIS)
Engelhardt, M.E.
1996-04-01
This report presents basic statistical methods for analyzing data obtained by observing random time durations. It gives nonparametric estimates of the cumulative distribution function, reliability function and cumulative hazard function. These results can be applied with either complete or censored data. Several models which are commonly used with time data are discussed, and methods for model checking and goodness-of-fit tests are discussed. Maximum likelihood estimates and confidence limits are given for the various models considered. Some results for situations where repeated durations such as repairable systems are also discussed
Statistical analysis of random pulse trains
International Nuclear Information System (INIS)
Da Costa, G.
1977-02-01
Some experimental and theoretical results concerning the statistical properties of optical beams formed by a finite number of independent pulses are presented. The considered waves (corresponding to each pulse) present important spatial variations of the illumination distribution in a cross-section of the beam, due to the time-varying random refractive index distribution in the active medium. Some examples of this kind of emission are: (a) Free-running ruby laser emission; (b) Mode-locked pulse trains; (c) Randomly excited nonlinear media
Statistical analysis of dragline monitoring data
Energy Technology Data Exchange (ETDEWEB)
Mirabediny, H.; Baafi, E.Y. [University of Tehran, Tehran (Iran)
1998-07-01
Dragline monitoring systems are normally the best tool used to collect data on the machine performance and operational parameters of a dragline operation. This paper discusses results of a time study using data from a dragline monitoring system captured over a four month period. Statistical summaries of the time study in terms of average values, standard deviation and frequency distributions showed that the mode of operation and the geological conditions have a significant influence on the dragline performance parameters. 6 refs., 14 figs., 3 tabs.
Comparing Visual and Statistical Analysis of Multiple Baseline Design Graphs.
Wolfe, Katie; Dickenson, Tammiee S; Miller, Bridget; McGrath, Kathleen V
2018-04-01
A growing number of statistical analyses are being developed for single-case research. One important factor in evaluating these methods is the extent to which each corresponds to visual analysis. Few studies have compared statistical and visual analysis, and information about more recently developed statistics is scarce. Therefore, our purpose was to evaluate the agreement between visual analysis and four statistical analyses: improvement rate difference (IRD); Tau-U; Hedges, Pustejovsky, Shadish (HPS) effect size; and between-case standardized mean difference (BC-SMD). Results indicate that IRD and BC-SMD had the strongest overall agreement with visual analysis. Although Tau-U had strong agreement with visual analysis on raw values, it had poorer agreement when those values were dichotomized to represent the presence or absence of a functional relation. Overall, visual analysis appeared to be more conservative than statistical analysis, but further research is needed to evaluate the nature of these disagreements.
Statistical mechanics and the description of the early universe I
DEFF Research Database (Denmark)
Pessah, Martin Elias; F. Torres, Diego; Vucetich, H.
2001-01-01
We analyze how the thermal history of the universe is influenced by the statistical description, assuming a deviation from the usual Bose-Einstein, Fermi-Dirac and Boltzmann-Gibbs distribution functions. These deviations represent the possible appearance of non-extensive effects related with the ......We analyze how the thermal history of the universe is influenced by the statistical description, assuming a deviation from the usual Bose-Einstein, Fermi-Dirac and Boltzmann-Gibbs distribution functions. These deviations represent the possible appearance of non-extensive effects related...... and to place limits to the range of its validity. The corrections obtained will change with temperature, and consequently, the bounds on the possible amount of non-extensivity will also change with time. We generalize results which can be used in other contexts as well, as the Boltzmann equation and the Saha...
A study of outliers in statistical distributions of mechanical properties of structural steels
International Nuclear Information System (INIS)
Oefverbeck, P.; Oestberg, G.
1977-01-01
The safety against failure of pressure vessels can be assessed by statistical methods, so-called probabilistic fracture mechanics. The data base for such estimations is admittedly rather meagre, making it necessary to assume certain conventional statistical distributions. Since the failure rates arrived at are low, for nuclear vessels of the order of 10 - to 10 - per year, the extremes of the variables involved, among other things the mechanical properties of the steel used, are of particular interest. A question sometimes raised is whether outliers, or values exceeding the extremes in the assumed distributions, might occur. In order to explore this possibility a study has been made of strength values of three qualities of structural steels, available in samples of up to about 12,000. Statistical evaluation of these samples with respect to outliers, using standard methods for this purpose, revealed the presence of such outliers in most cases, with a frequency of occurrence of, typically, a few values per thousand, estimated by the methods described. Obviously, statistical analysis alone cannot be expected to shed any light on the causes of outliers. Thus, the interpretation of these results with respect to their implication for the probabilistic estimation of the integrety of pressure vessels must await further studies of a similar nature in which the test specimens corresponding to outliers can be recovered and examined metallographically. For the moment the results should be regarded only as a factor to be considered in discussions of the safety of pressure vessels. (author)
Erwin Schroedinger: Collected papers V. 1. Contributions to statistical mechanics
International Nuclear Information System (INIS)
Schroedinger, E.
1984-01-01
38 publications reprinted in this volume show that the interest for statistical problems accompanied Schroedinger during his entire scientific career. Already in his second paper he worked on the magnetism of solid states. The classical considerations come close to the heart of diamagnetism and also to the origin of paramagnetism. In classical investigations of the specific heat Schroedinger helped through abstract theory but also by analysing a gigantic amount of experimental material. In 1926 he and F. Kohlrausch actually played the 'Urngame of Ehrenfest' as a model of the H-curve and published the results. Inclination towards experimenting, sequences of measurements and statistical evaluation of experimental data led to papers on the foundation of the theory of probability, where he tries to put the subjective probability concept on into a systematic framework. Two earlier papers on dynamics of the elastic chain remained particularly valuable. By solving the initial value problem with Bessel-functions this many-body-problem is led to an explicit discussion. These studies are likely to be the roots of another keynote in Schroedinger's thinking, namely, the irreversibility. 1945 a statistical theory of chain-reactions was published under the inconspicuous title of 'Probability Problems in Nuclear Chemistry'. In his last work Schroedinger turns off in a wrong direction: it is that energy should only be a statistical concept and should not be conserved in elementary processes, but somehow only in the mean. These short remarks only illuminate the diversity of the material in this volume, but testify Schroedinger's deep understanding in this field. (W.K.)
CONFIDENCE LEVELS AND/VS. STATISTICAL HYPOTHESIS TESTING IN STATISTICAL ANALYSIS. CASE STUDY
Directory of Open Access Journals (Sweden)
ILEANA BRUDIU
2009-05-01
Full Text Available Estimated parameters with confidence intervals and testing statistical assumptions used in statistical analysis to obtain conclusions on research from a sample extracted from the population. Paper to the case study presented aims to highlight the importance of volume of sample taken in the study and how this reflects on the results obtained when using confidence intervals and testing for pregnant. If statistical testing hypotheses not only give an answer "yes" or "no" to some questions of statistical estimation using statistical confidence intervals provides more information than a test statistic, show high degree of uncertainty arising from small samples and findings build in the "marginally significant" or "almost significant (p very close to 0.05.
Statistical models for competing risk analysis
International Nuclear Information System (INIS)
Sather, H.N.
1976-08-01
Research results on three new models for potential applications in competing risks problems. One section covers the basic statistical relationships underlying the subsequent competing risks model development. Another discusses the problem of comparing cause-specific risk structure by competing risks theory in two homogeneous populations, P1 and P2. Weibull models which allow more generality than the Berkson and Elveback models are studied for the effect of time on the hazard function. The use of concomitant information for modeling single-risk survival is extended to the multiple failure mode domain of competing risks. The model used to illustrate the use of this methodology is a life table model which has constant hazards within pre-designated intervals of the time scale. Two parametric models for bivariate dependent competing risks, which provide interesting alternatives, are proposed and examined
Statistical analysis of earthquake ground motion parameters
International Nuclear Information System (INIS)
1979-12-01
Several earthquake ground response parameters that define the strength, duration, and frequency content of the motions are investigated using regression analyses techniques; these techniques incorporate statistical significance testing to establish the terms in the regression equations. The parameters investigated are the peak acceleration, velocity, and displacement; Arias intensity; spectrum intensity; bracketed duration; Trifunac-Brady duration; and response spectral amplitudes. The study provides insight into how these parameters are affected by magnitude, epicentral distance, local site conditions, direction of motion (i.e., whether horizontal or vertical), and earthquake event type. The results are presented in a form so as to facilitate their use in the development of seismic input criteria for nuclear plants and other major structures. They are also compared with results from prior investigations that have been used in the past in the criteria development for such facilities
Addressing the statistical mechanics of planet orbits in the solar system
Mogavero, Federico
2017-10-01
The chaotic nature of planet dynamics in the solar system suggests the relevance of a statistical approach to planetary orbits. In such a statistical description, the time-dependent position and velocity of the planets are replaced by the probability density function (PDF) of their orbital elements. It is natural to set up this kind of approach in the framework of statistical mechanics. In the present paper, I focus on the collisionless excitation of eccentricities and inclinations via gravitational interactions in a planetary system. The future planet trajectories in the solar system constitute the prototype of this kind of dynamics. I thus address the statistical mechanics of the solar system planet orbits and try to reproduce the PDFs numerically constructed by Laskar (2008, Icarus, 196, 1). I show that the microcanonical ensemble of the Laplace-Lagrange theory accurately reproduces the statistics of the giant planet orbits. To model the inner planets I then investigate the ansatz of equiprobability in the phase space constrained by the secular integrals of motion. The eccentricity and inclination PDFs of Earth and Venus are reproduced with no free parameters. Within the limitations of a stationary model, the predictions also show a reasonable agreement with Mars PDFs and that of Mercury inclination. The eccentricity of Mercury demands in contrast a deeper analysis. I finally revisit the random walk approach of Laskar to the time dependence of the inner planet PDFs. Such a statistical theory could be combined with direct numerical simulations of planet trajectories in the context of planet formation, which is likely to be a chaotic process.
Statistical power analysis for the behavioral sciences
National Research Council Canada - National Science Library
Cohen, Jacob
1988-01-01
.... A chapter has been added for power analysis in set correlation and multivariate methods (Chapter 10). Set correlation is a realization of the multivariate general linear model, and incorporates the standard multivariate methods...
Statistical power analysis for the behavioral sciences
National Research Council Canada - National Science Library
Cohen, Jacob
1988-01-01
... offers a unifying framework and some new data-analytic possibilities. 2. A new chapter (Chapter 11) considers some general topics in power analysis in more integrted form than is possible in the earlier...
Statistical methods for categorical data analysis
Powers, Daniel
2008-01-01
This book provides a comprehensive introduction to methods and models for categorical data analysis and their applications in social science research. Companion website also available, at https://webspace.utexas.edu/dpowers/www/
Student understanding of Taylor series expansions in statistical mechanics
Directory of Open Access Journals (Sweden)
Trevor I. Smith
2013-08-01
Full Text Available One goal of physics instruction is to have students learn to make physical meaning of specific mathematical expressions, concepts, and procedures in different physical settings. As part of research investigating student learning in statistical physics, we are developing curriculum materials that guide students through a derivation of the Boltzmann factor using a Taylor series expansion of entropy. Using results from written surveys, classroom observations, and both individual think-aloud and teaching interviews, we present evidence that many students can recognize and interpret series expansions, but they often lack fluency in creating and using a Taylor series appropriately, despite previous exposures in both calculus and physics courses.
Student understanding of Taylor series expansions in statistical mechanics
Smith, Trevor I.; Thompson, John R.; Mountcastle, Donald B.
2013-12-01
One goal of physics instruction is to have students learn to make physical meaning of specific mathematical expressions, concepts, and procedures in different physical settings. As part of research investigating student learning in statistical physics, we are developing curriculum materials that guide students through a derivation of the Boltzmann factor using a Taylor series expansion of entropy. Using results from written surveys, classroom observations, and both individual think-aloud and teaching interviews, we present evidence that many students can recognize and interpret series expansions, but they often lack fluency in creating and using a Taylor series appropriately, despite previous exposures in both calculus and physics courses.
Quantum statistical mechanics selected works of N N Bogolubov
Bogolyubov, N N
2015-01-01
In this book we have solved the complicated problem of constructing upper bounds for many-time averages for the case of a fairly broad class of model systems with four-fermion interaction. The methods proposed in this book for solving this problem will undoubtedly find application not only for the model systems associated with the theory of superconductivity considered here. The theoretical methods developed in Chapters 1 and 2 are already applicable to a much broader class of model systems from statistical physics and the theory of elementary particles. Contents: On the Theory of Superfluidit
On second quantization methods applied to classical statistical mechanics
International Nuclear Information System (INIS)
Matos Neto, A.; Vianna, J.D.M.
1984-01-01
A method of expressing statistical classical results in terms of mathematical entities usually associated to quantum field theoretical treatment of many particle systems (Fock space, commutators, field operators, state vector) is discussed. It is developed a linear response theory using the 'second quantized' Liouville equation introduced by Schonberg. The relationship of this method to that of Prigogine et al. is briefly analyzed. The chain of equations and the spectral representations for the new classical Green's functions are presented. Generalized operators defined on Fock space are discussed. It is shown that the correlation functions can be obtained from Green's functions defined with generalized operators. (Author) [pt
Statistical analysis of magnetically soft particles in magnetorheological elastomers
Gundermann, T.; Cremer, P.; Löwen, H.; Menzel, A. M.; Odenbach, S.
2017-04-01
The physical properties of magnetorheological elastomers (MRE) are a complex issue and can be influenced and controlled in many ways, e.g. by applying a magnetic field, by external mechanical stimuli, or by an electric potential. In general, the response of MRE materials to these stimuli is crucially dependent on the distribution of the magnetic particles inside the elastomer. Specific knowledge of the interactions between particles or particle clusters is of high relevance for understanding the macroscopic rheological properties and provides an important input for theoretical calculations. In order to gain a better insight into the correlation between the macroscopic effects and microstructure and to generate a database for theoretical analysis, x-ray micro-computed tomography (X-μCT) investigations as a base for a statistical analysis of the particle configurations were carried out. Different MREs with quantities of 2-15 wt% (0.27-2.3 vol%) of iron powder and different allocations of the particles inside the matrix were prepared. The X-μCT results were edited by an image processing software regarding the geometrical properties of the particles with and without the influence of an external magnetic field. Pair correlation functions for the positions of the particles inside the elastomer were calculated to statistically characterize the distributions of the particles in the samples.
Application of few-body methods to statistical mechanics
International Nuclear Information System (INIS)
Bolle, D.
1981-01-01
This paper reviews some of the methods to study the thermodynamic properties of a macroscopic system in terms of the scattering processes between the constituent particles in the system. In particular, we discuss the time delay approach to the virial expansion and the use of the arrangement channel quantum mechanics formulation in kinetic theory. (orig.)
Statistical Modelling of Wind Proles - Data Analysis and Modelling
DEFF Research Database (Denmark)
Jónsson, Tryggvi; Pinson, Pierre
The aim of the analysis presented in this document is to investigate whether statistical models can be used to make very short-term predictions of wind profiles.......The aim of the analysis presented in this document is to investigate whether statistical models can be used to make very short-term predictions of wind profiles....
Sensitivity analysis of ranked data: from order statistics to quantiles
Heidergott, B.F.; Volk-Makarewicz, W.
2015-01-01
In this paper we provide the mathematical theory for sensitivity analysis of order statistics of continuous random variables, where the sensitivity is with respect to a distributional parameter. Sensitivity analysis of order statistics over a finite number of observations is discussed before
Hayslett, H T
1991-01-01
Statistics covers the basic principles of Statistics. The book starts by tackling the importance and the two kinds of statistics; the presentation of sample data; the definition, illustration and explanation of several measures of location; and the measures of variation. The text then discusses elementary probability, the normal distribution and the normal approximation to the binomial. Testing of statistical hypotheses and tests of hypotheses about the theoretical proportion of successes in a binomial population and about the theoretical mean of a normal population are explained. The text the
Nonequilibrium statistical mechanics of systems with long-range interactions
Energy Technology Data Exchange (ETDEWEB)
Levin, Yan, E-mail: levin@if.ufrgs.br; Pakter, Renato, E-mail: pakter@if.ufrgs.br; Rizzato, Felipe B., E-mail: rizzato@if.ufrgs.br; Teles, Tarcísio N., E-mail: tarcisio.teles@fi.infn.it; Benetti, Fernanda P.C., E-mail: fbenetti@if.ufrgs.br
2014-02-01
Systems with long-range (LR) forces, for which the interaction potential decays with the interparticle distance with an exponent smaller than the dimensionality of the embedding space, remain an outstanding challenge to statistical physics. The internal energy of such systems lacks extensivity and additivity. Although the extensivity can be restored by scaling the interaction potential with the number of particles, the non-additivity still remains. Lack of additivity leads to inequivalence of statistical ensembles. Before relaxing to thermodynamic equilibrium, isolated systems with LR forces become trapped in out-of-equilibrium quasi-stationary states (qSSs), the lifetime of which diverges with the number of particles. Therefore, in the thermodynamic limit LR systems will not relax to equilibrium. The qSSs are attained through the process of collisionless relaxation. Density oscillations lead to particle–wave interactions and excitation of parametric resonances. The resonant particles escape from the main cluster to form a tenuous halo. Simultaneously, this cools down the core of the distribution and dampens out the oscillations. When all the oscillations die out the ergodicity is broken and a qSS is born. In this report, we will review a theory which allows us to quantitatively predict the particle distribution in the qSS. The theory is applied to various LR interacting systems, ranging from plasmas to self-gravitating clusters and kinetic spin models.
Statistical analysis of disruptions in JET
International Nuclear Information System (INIS)
De Vries, P.C.; Johnson, M.F.; Segui, I.
2009-01-01
The disruption rate (the percentage of discharges that disrupt) in JET was found to drop steadily over the years. Recent campaigns (2005-2007) show a yearly averaged disruption rate of only 6% while from 1991 to 1995 this was often higher than 20%. Besides the disruption rate, the so-called disruptivity, or the likelihood of a disruption depending on the plasma parameters, has been determined. The disruptivity of plasmas was found to be significantly higher close to the three main operational boundaries for tokamaks; the low-q, high density and β-limit. The frequency at which JET operated close to the density-limit increased six fold over the last decade; however, only a small reduction in disruptivity was found. Similarly the disruptivity close to the low-q and β-limit was found to be unchanged. The most significant reduction in disruptivity was found far from the operational boundaries, leading to the conclusion that the improved disruption rate is due to a better technical capability of operating JET, instead of safer operations close to the physics limits. The statistics showed that a simple protection system was able to mitigate the forces of a large fraction of disruptions, although it has proved to be at present more difficult to ameliorate the heat flux.
The Statistical Analysis of Failure Time Data
Kalbfleisch, John D
2011-01-01
Contains additional discussion and examples on left truncation as well as material on more general censoring and truncation patterns.Introduces the martingale and counting process formulation swil lbe in a new chapter.Develops multivariate failure time data in a separate chapter and extends the material on Markov and semi Markov formulations.Presents new examples and applications of data analysis.
Statistical mechanics of flux lines in high-temperature superconductors
International Nuclear Information System (INIS)
Dasgupta, C.
1992-01-01
The shortness of the low temperature coherence lengths of high T c materials leads to new mechanisms of pinning of flux lines. Lattice periodic modulations of the order parameters itself acts to pin vortex lines in regions of the unit cell were the order parameter is small. A presentation of flux creep and flux noise at low temperature and magnetic fields in terms of motion of simple metastable defects on flux lines is made, with a calculation of flux lattice melting. 12 refs
Nonextensive statistical mechanics approach to electron trapping in degenerate plasmas
Mebrouk, Khireddine; Gougam, Leila Ait; Tribeche, Mouloud
2016-06-01
The electron trapping in a weakly nondegenerate plasma is reformulated and re-examined by incorporating the nonextensive entropy prescription. Using the q-deformed Fermi-Dirac distribution function including the quantum as well as the nonextensive statistical effects, we derive a new generalized electron density with a new contribution proportional to the electron temperature T, which may dominate the usual thermal correction (∼T2) at very low temperatures. To make the physics behind the effect of this new contribution more transparent, we analyze the modifications arising in the propagation of ion-acoustic solitary waves. Interestingly, we find that due to the nonextensive correction, our plasma model allows the possibility of existence of quantum ion-acoustic solitons with velocity higher than the Fermi ion-sound velocity. Moreover, as the nonextensive parameter q increases, the critical temperature Tc beyond which coexistence of compressive and rarefactive solitons sets in, is shifted towards higher values.
On the analysis of line profile variations: A statistical approach
International Nuclear Information System (INIS)
McCandliss, S.R.
1988-01-01
This study is concerned with the empirical characterization of the line profile variations (LPV), which occur in many of and Wolf-Rayet stars. The goal of the analysis is to gain insight into the physical mechanisms producing the variations. The analytic approach uses a statistical method to quantify the significance of the LPV and to identify those regions in the line profile which are undergoing statistically significant variations. Line positions and flux variations are then measured and subject to temporal and correlative analysis. Previous studies of LPV have for the most part been restricted to observations of a single line. Important information concerning the range and amplitude of the physical mechanisms involved can be obtained by simultaneously observing spectral features formed over a range of depths in the extended mass losing atmospheres of massive, luminous stars. Time series of a Wolf-Rayet and two of stars with nearly complete spectral coverage from 3940 angstrom to 6610 angstrom and with spectral resolution of R = 10,000 are analyzed here. These three stars exhibit a wide range of both spectral and temporal line profile variations. The HeII Pickering lines of HD 191765 show a monotonic increase in the peak rms variation amplitude with lines formed at progressively larger radii in the Wolf-Rayet star wind. Two times scales of variation have been identified in this star: a less than one day variation associated with small scale flickering in the peaks of the line profiles and a greater than one day variation associated with large scale asymmetric changes in the overall line profile shapes. However, no convincing period phenomena are evident at those periods which are well sampled in this time series
An analysis of UK wind farm statistics
International Nuclear Information System (INIS)
Milborrow, D.J.
1995-01-01
An analysis of key data for 22 completed wind projects shows 134 MW of plant cost Pound 152 million, giving an average cost of Pound 1136/kW. The energy generation potential of these windfarms is around 360 GWh, derived from sites with windspeeds between 6.2 and 8.8 m/s. Relationships between wind speed, energy production and cost were examined and it was found that costs increased with wind speed, due to the difficulties of access in hilly regions. It also appears that project costs fell with time and wind energy prices have fallen much faster than electricity prices. (Author)
Einstein's Approach to Statistical Mechanics: The 1902-04 Papers
Peliti, Luca; Rechtman, Raúl
2017-05-01
We summarize the papers published by Einstein in the Annalen der Physik in the years 1902-1904 on the derivation of the properties of thermal equilibrium on the basis of the mechanical equations of motion and of the calculus of probabilities. We point out the line of thought that led Einstein to an especially economical foundation of the discipline, and to focus on fluctuations of the energy as a possible tool for establishing the validity of this foundation. We also sketch a comparison of Einstein's approach with that of Gibbs, suggesting that although they obtained similar results, they had different motivations and interpreted them in very different ways.
Statistical analysis of the DWPF prototypic sampler
International Nuclear Information System (INIS)
Postles, R.L.; Reeve, C.P.; Jenkins, W.J.; Bickford, D.F.
1991-01-01
The DWPF process will be controlled using assay measurements on samples of feed slurry. These slurries are radioactive, and thus will be sampled remotely. A Hydraguard trademark pump-driven sampler system will be used as the remote sampling device. A prototype Hydraguard trademark sampler has been studied in a full-scale mock-up of a DWPF process vessel. Two issues were of dominant interest: (1) what accuracy and precision can be provided by such a pump-driven sampler in the face of the slurry rheology; and, if the Hydraguard trademark sample accurately represents the slurry in its local area, (2) is the slurry homogeneous enough throughout for it to represent the entire vessel? To determine Hydraguard trademark Accuracy, a Grab Sampler of simpler mechanism was used as reference. This (Low) Grab Sampler was located as near to the intake port of the Hydraguard trademark as could be arranged. To determine Homogeneity, a second (High) Grab Sampler was located above the first. The data necessary to these determinations comes from the measurement system, so its important variables also affect the results. Thus, the design of the test involved not just Sampling variables, but also some of the Measurement variables as well. However, the main concern was the Sampler and not the Measurement System, so the test design included only such measurement variables as could not be circumvented (Vials, Dissolution Method, and Aliquoting). The test was executed by, or under the direct oversight of, expert technologists. It thus did not explore the many important particulars of ''routine'' plant operations (such as Remote Sample Preparation or Laboratory Shift Operation)
On the geometry of the spin-statistics connection in quantum mechanics
Energy Technology Data Exchange (ETDEWEB)
Reyes, A.
2006-07-01
The Spin-Statistics theorem states that the statistics of a system of identical particles is determined by their spin: Particles of integer spin are Bosons (i.e. obey Bose-Einstein statistics), whereas particles of half-integer spin are Fermions (i.e. obey Fermi-Dirac statistics). Since the original proof by Fierz and Pauli, it has been known that the connection between Spin and Statistics follows from the general principles of relativistic Quantum Field Theory. In spite of this, there are different approaches to Spin-Statistics and it is not clear whether the theorem holds under assumptions that are different, and even less restrictive, than the usual ones (e.g. Lorentz-covariance). Additionally, in Quantum Mechanics there is a deep relation between indistinguishability and the geometry of the configuration space. This is clearly illustrated by Gibbs' paradox. Therefore, for many years efforts have been made in order to find a geometric proof of the connection between Spin and Statistics. Recently, various proposals have been put forward, in which an attempt is made to derive the Spin-Statistics connection from assumptions different from the ones used in the relativistic, quantum field theoretic proofs. Among these, there is the one due to Berry and Robbins (BR), based on the postulation of a certain single-valuedness condition, that has caused a renewed interest in the problem. In the present thesis, we consider the problem of indistinguishability in Quantum Mechanics from a geometric-algebraic point of view. An approach is developed to study configuration spaces Q having a finite fundamental group, that allows us to describe different geometric structures of Q in terms of spaces of functions on the universal cover of Q. In particular, it is shown that the space of complex continuous functions over the universal cover of Q admits a decomposition into C(Q)-submodules, labelled by the irreducible representations of the fundamental group of Q, that can be
A statistical analysis of UK financial networks
Chu, J.; Nadarajah, S.
2017-04-01
In recent years, with a growing interest in big or large datasets, there has been a rise in the application of large graphs and networks to financial big data. Much of this research has focused on the construction and analysis of the network structure of stock markets, based on the relationships between stock prices. Motivated by Boginski et al. (2005), who studied the characteristics of a network structure of the US stock market, we construct network graphs of the UK stock market using same method. We fit four distributions to the degree density of the vertices from these graphs, the Pareto I, Fréchet, lognormal, and generalised Pareto distributions, and assess the goodness of fit. Our results show that the degree density of the complements of the market graphs, constructed using a negative threshold value close to zero, can be fitted well with the Fréchet and lognormal distributions.
Links to sources of cancer-related statistics, including the Surveillance, Epidemiology and End Results (SEER) Program, SEER-Medicare datasets, cancer survivor prevalence data, and the Cancer Trends Progress Report.
PGT: A Statistical Approach to Prediction and Mechanism Design
Wolpert, David H.; Bono, James W.
One of the biggest challenges facing behavioral economics is the lack of a single theoretical framework that is capable of directly utilizing all types of behavioral data. One of the biggest challenges of game theory is the lack of a framework for making predictions and designing markets in a manner that is consistent with the axioms of decision theory. An approach in which solution concepts are distribution-valued rather than set-valued (i.e. equilibrium theory) has both capabilities. We call this approach Predictive Game Theory (or PGT). This paper outlines a general Bayesian approach to PGT. It also presents one simple example to illustrate the way in which this approach differs from equilibrium approaches in both prediction and mechanism design settings.
Comparative analysis of positive and negative attitudes toward statistics
Ghulami, Hassan Rahnaward; Ab Hamid, Mohd Rashid; Zakaria, Roslinazairimah
2015-02-01
Many statistics lecturers and statistics education researchers are interested to know the perception of their students' attitudes toward statistics during the statistics course. In statistics course, positive attitude toward statistics is a vital because it will be encourage students to get interested in the statistics course and in order to master the core content of the subject matters under study. Although, students who have negative attitudes toward statistics they will feel depressed especially in the given group assignment, at risk for failure, are often highly emotional, and could not move forward. Therefore, this study investigates the students' attitude towards learning statistics. Six latent constructs have been the measurement of students' attitudes toward learning statistic such as affect, cognitive competence, value, difficulty, interest, and effort. The questionnaire was adopted and adapted from the reliable and validate instrument of Survey of Attitudes towards Statistics (SATS). This study is conducted among engineering undergraduate engineering students in the university Malaysia Pahang (UMP). The respondents consist of students who were taking the applied statistics course from different faculties. From the analysis, it is found that the questionnaire is acceptable and the relationships among the constructs has been proposed and investigated. In this case, students show full effort to master the statistics course, feel statistics course enjoyable, have confidence that they have intellectual capacity, and they have more positive attitudes then negative attitudes towards statistics learning. In conclusion in terms of affect, cognitive competence, value, interest and effort construct the positive attitude towards statistics was mostly exhibited. While negative attitudes mostly exhibited by difficulty construct.
Impact initiation of explosives and propellants via statistical crack mechanics
Dienes, J. K.; Zuo, Q. H.; Kershner, J. D.
2006-06-01
A statistical approach has been developed for modeling the dynamic response of brittle materials by superimposing the effects of a myriad of microcracks, including opening, shear, growth and coalescence, taking as a starting point the well-established theory of penny-shaped cracks. This paper discusses the general approach, but in particular an application to the sensitivity of explosives and propellants, which often contain brittle constituents. We examine the hypothesis that the intense heating by frictional sliding between the faces of a closed crack during unstable growth can form a hot spot, causing localized melting, ignition, and fast burn of the reactive material adjacent to the crack. Opening and growth of a closed crack due to the pressure of burned gases inside the crack and interactions of adjacent cracks can lead to violent reaction, with detonation as a possible consequence. This approach was used to model a multiple-shock experiment by Mulford et al. [1993. Initiation of preshocked high explosives PBX-9404, PBX-9502, PBX-9501, monitored with in-material magnetic gauging. In: Proceedings of the 10th International Detonation Symposium, pp. 459-467] involving initiation and subsequent quenching of chemical reactions in a slab of PBX 9501 impacted by a two-material flyer plate. We examine the effects of crack orientation and temperature dependence of viscosity of the melt on the response. Numerical results confirm our theoretical finding [Zuo, Q.H., Dienes, J.K., 2005. On the stability of penny-shaped cracks with friction: the five types of brittle behavior. Int. J. Solids Struct. 42, 1309-1326] that crack orientation has a significant effect on brittle behavior, especially under compressive loading where interfacial friction plays an important role. With a reasonable choice of crack orientation and a temperature-dependent viscosity obtained from molecular dynamics calculations, the calculated particle velocities compare well with those measured using
The problem of phase transitions in statistical mechanics
International Nuclear Information System (INIS)
Martynov, Georgii A
1999-01-01
The first part of this review deals with the single-phase approach to the statistical theory of phase transitions. This approach is based on the assumption that a first-order phase transition is due to the loss of stability of the parent phase. We demonstrate that it is practically impossible to find the coordinates of the transition points using this criterion in the framework of the global Gibbs theory which describes the state of the entire macroscopic system. On the basis of the Ornstein-Zernike equation we formulate a local approach that analyzes the state of matter inside the correlation sphere of radius R c ∼ 10 A. This approach is proved to be as rigorous as the Gibbs theory. In the context of the local approach we formulate a criterion that allows finding the transition points without calculating the chemical potential and the pressure of the second conjugate phase. In the second part of the review we consider second-order phase transitions (critical phenomena). The Kadanoff-Wilson theory of critical phenomena is analyzed, based on the global Gibbs approach. Again we use the Ornstein-Zernike equation to formulate a local theory of critical phenomena. With regard to experimentally established quantities this theory yields precisely the same results as the Kadanoff-Wilson theory; secondly, the local approach allows the prediction of many previously unknown details of critical phenomena, and thirdly, the local approach paves the way for constructing a unified theory of liquids that will describe the behavior of matter not only in the regular domain of the phase diagram, but also at the critical point and in its vicinity. (reviews of topical problems)
CORSSA: The Community Online Resource for Statistical Seismicity Analysis
Michael, Andrew J.; Wiemer, Stefan
2010-01-01
Statistical seismology is the application of rigorous statistical methods to earthquake science with the goal of improving our knowledge of how the earth works. Within statistical seismology there is a strong emphasis on the analysis of seismicity data in order to improve our scientific understanding of earthquakes and to improve the evaluation and testing of earthquake forecasts, earthquake early warning, and seismic hazards assessments. Given the societal importance of these applications, statistical seismology must be done well. Unfortunately, a lack of educational resources and available software tools make it difficult for students and new practitioners to learn about this discipline. The goal of the Community Online Resource for Statistical Seismicity Analysis (CORSSA) is to promote excellence in statistical seismology by providing the knowledge and resources necessary to understand and implement the best practices, so that the reader can apply these methods to their own research. This introduction describes the motivation for and vision of CORRSA. It also describes its structure and contents.
Method for statistical data analysis of multivariate observations
Gnanadesikan, R
1997-01-01
A practical guide for multivariate statistical techniques-- now updated and revised In recent years, innovations in computer technology and statistical methodologies have dramatically altered the landscape of multivariate data analysis. This new edition of Methods for Statistical Data Analysis of Multivariate Observations explores current multivariate concepts and techniques while retaining the same practical focus of its predecessor. It integrates methods and data-based interpretations relevant to multivariate analysis in a way that addresses real-world problems arising in many areas of inte
Statistical evaluation of diagnostic performance topics in ROC analysis
Zou, Kelly H; Bandos, Andriy I; Ohno-Machado, Lucila; Rockette, Howard E
2016-01-01
Statistical evaluation of diagnostic performance in general and Receiver Operating Characteristic (ROC) analysis in particular are important for assessing the performance of medical tests and statistical classifiers, as well as for evaluating predictive models or algorithms. This book presents innovative approaches in ROC analysis, which are relevant to a wide variety of applications, including medical imaging, cancer research, epidemiology, and bioinformatics. Statistical Evaluation of Diagnostic Performance: Topics in ROC Analysis covers areas including monotone-transformation techniques in parametric ROC analysis, ROC methods for combined and pooled biomarkers, Bayesian hierarchical transformation models, sequential designs and inferences in the ROC setting, predictive modeling, multireader ROC analysis, and free-response ROC (FROC) methodology. The book is suitable for graduate-level students and researchers in statistics, biostatistics, epidemiology, public health, biomedical engineering, radiology, medi...
Online Statistical Modeling (Regression Analysis) for Independent Responses
Made Tirta, I.; Anggraeni, Dian; Pandutama, Martinus
2017-06-01
Regression analysis (statistical analmodelling) are among statistical methods which are frequently needed in analyzing quantitative data, especially to model relationship between response and explanatory variables. Nowadays, statistical models have been developed into various directions to model various type and complex relationship of data. Rich varieties of advanced and recent statistical modelling are mostly available on open source software (one of them is R). However, these advanced statistical modelling, are not very friendly to novice R users, since they are based on programming script or command line interface. Our research aims to developed web interface (based on R and shiny), so that most recent and advanced statistical modelling are readily available, accessible and applicable on web. We have previously made interface in the form of e-tutorial for several modern and advanced statistical modelling on R especially for independent responses (including linear models/LM, generalized linier models/GLM, generalized additive model/GAM and generalized additive model for location scale and shape/GAMLSS). In this research we unified them in the form of data analysis, including model using Computer Intensive Statistics (Bootstrap and Markov Chain Monte Carlo/ MCMC). All are readily accessible on our online Virtual Statistics Laboratory. The web (interface) make the statistical modeling becomes easier to apply and easier to compare them in order to find the most appropriate model for the data.
Parallelism in computations in quantum and statistical mechanics
International Nuclear Information System (INIS)
Clementi, E.; Corongiu, G.; Detrich, J.H.
1985-01-01
Often very fundamental biochemical and biophysical problems defy simulations because of limitations in today's computers. We present and discuss a distributed system composed of two IBM 4341 s and/or an IBM 4381 as front-end processors and ten FPS-164 attached array processors. This parallel system - called LCAP - has presently a peak performance of about 110 Mflops; extensions to higher performance are discussed. Presently, the system applications use a modified version of VM/SP as the operating system: description of the modifications is given. Three applications programs have been migrated from sequential to parallel: a molecular quantum mechanical, a Metropolis-Monte Carlo and a molecular dynamics program. Descriptions of the parallel codes are briefly outlined. Use of these parallel codes has already opened up new capabilities for our research. The very positive performance comparisons with today's supercomputers allow us to conclude that parallel computers and programming, of the type we have considered, represent a pragmatic answer to many computationally intensive problems. (orig.)
Statistical Analysis and Modelling of Olkiluoto Structures
International Nuclear Information System (INIS)
Hellae, P.; Vaittinen, T.; Saksa, P.; Nummela, J.
2004-11-01
Posiva Oy is carrying out investigations for the disposal of the spent nuclear fuel at the Olkiluoto site in SW Finland. The investigations have focused on the central part of the island. The layout design of the entire repository requires characterization of notably larger areas and must rely at least at the current stage on borehole information from a rather sparse network and on the geophysical soundings providing information outside and between the holes. In this work, the structural data according to the current version of the Olkiluoto bedrock model is analyzed. The bedrock model relies much on the borehole data although results of the seismic surveys and, for example, pumping tests are used in determining the orientation and continuation of the structures. Especially in the analysis, questions related to the frequency of structures and size of the structures are discussed. The structures observed in the boreholes are mainly dipping gently to the southeast. About 9 % of the sample length belongs to structures. The proportion is higher in the upper parts of the rock. The number of fracture and crushed zones seems not to depend greatly on the depth, whereas the hydraulic features concentrate on the depth range above -100 m. Below level -300 m, the hydraulic conductivity occurs in connection of fractured zones. Especially the hydraulic features, but also fracture and crushed zones often occur in groups. The frequency of the structure (area of structures per total volume) is estimated to be of the order of 1/100m. The size of the local structures was estimated by calculating the intersection of the zone to the nearest borehole where the zone has not been detected. Stochastic models using the Fracman software by Golder Associates were generated based on the bedrock model data complemented with the magnetic ground survey data. The seismic surveys (from boreholes KR5, KR13, KR14, and KR19) were used as alternative input data. The generated models were tested by
Directory of Open Access Journals (Sweden)
Sheng Wang
2007-10-01
Full Text Available The recent availability of low cost and miniaturized hardware has allowedwireless sensor networks (WSNs to retrieve audio and video data in real worldapplications, which has fostered the development of wireless multimedia sensor networks(WMSNs. Resource constraints and challenging multimedia data volume makedevelopment of efficient algorithms to perform in-network processing of multimediacontents imperative. This paper proposes solving problems in the domain of WMSNs fromthe perspective of multi-agent systems. The multi-agent framework enables flexible networkconfiguration and efficient collaborative in-network processing. The focus is placed ontarget classification in WMSNs where audio information is retrieved by microphones. Todeal with the uncertainties related to audio information retrieval, the statistical approachesof power spectral density estimates, principal component analysis and Gaussian processclassification are employed. A multi-agent negotiation mechanism is specially developed toefficiently utilize limited resources and simultaneously enhance classification accuracy andreliability. The negotiation is composed of two phases, where an auction based approach isfirst exploited to allocate the classification task among the agents and then individual agentdecisions are combined by the committee decision mechanism. Simulation experiments withreal world data are conducted and the results show that the proposed statistical approachesand negotiation mechanism not only reduce memory and computation requi
Oravec, Heather Ann; Daniels, Christopher C.
2014-01-01
The National Aeronautics and Space Administration has been developing a novel docking system to meet the requirements of future exploration missions to low-Earth orbit and beyond. A dynamic gas pressure seal is located at the main interface between the active and passive mating components of the new docking system. This seal is designed to operate in the harsh space environment, but is also to perform within strict loading requirements while maintaining an acceptable level of leak rate. In this study, a candidate silicone elastomer seal was designed, and multiple subscale test articles were manufactured for evaluation purposes. The force required to fully compress each test article at room temperature was quantified and found to be below the maximum allowable load for the docking system. However, a significant amount of scatter was observed in the test results. Due to the stochastic nature of the mechanical performance of this candidate docking seal, a statistical process control technique was implemented to isolate unusual compression behavior from typical mechanical performance. The results of this statistical analysis indicated a lack of process control, suggesting a variation in the manufacturing phase of the process. Further investigation revealed that changes in the manufacturing molding process had occurred which may have influenced the mechanical performance of the seal. This knowledge improves the chance of this and future space seals to satisfy or exceed design specifications.
Wang, Xue; Bi, Dao-wei; Ding, Liang; Wang, Sheng
2007-01-01
The recent availability of low cost and miniaturized hardware has allowed wireless sensor networks (WSNs) to retrieve audio and video data in real world applications, which has fostered the development of wireless multimedia sensor networks (WMSNs). Resource constraints and challenging multimedia data volume make development of efficient algorithms to perform in-network processing of multimedia contents imperative. This paper proposes solving problems in the domain of WMSNs from the perspective of multi-agent systems. The multi-agent framework enables flexible network configuration and efficient collaborative in-network processing. The focus is placed on target classification in WMSNs where audio information is retrieved by microphones. To deal with the uncertainties related to audio information retrieval, the statistical approaches of power spectral density estimates, principal component analysis and Gaussian process classification are employed. A multi-agent negotiation mechanism is specially developed to efficiently utilize limited resources and simultaneously enhance classification accuracy and reliability. The negotiation is composed of two phases, where an auction based approach is first exploited to allocate the classification task among the agents and then individual agent decisions are combined by the committee decision mechanism. Simulation experiments with real world data are conducted and the results show that the proposed statistical approaches and negotiation mechanism not only reduce memory and computation requirements in WMSNs but also significantly enhance classification accuracy and reliability. PMID:28903223
Explorations in Statistics: The Analysis of Ratios and Normalized Data
Curran-Everett, Douglas
2013-01-01
Learning about statistics is a lot like learning about science: the learning is more meaningful if you can actively explore. This ninth installment of "Explorations in Statistics" explores the analysis of ratios and normalized--or standardized--data. As researchers, we compute a ratio--a numerator divided by a denominator--to compute a…
Analysis of thrips distribution: application of spatial statistics and Kriging
John Aleong; Bruce L. Parker; Margaret Skinner; Diantha Howard
1991-01-01
Kriging is a statistical technique that provides predictions for spatially and temporally correlated data. Observations of thrips distribution and density in Vermont soils are made in both space and time. Traditional statistical analysis of such data assumes that the counts taken over space and time are independent, which is not necessarily true. Therefore, to analyze...
International Nuclear Information System (INIS)
2005-01-01
For the years 2004 and 2005 the figures shown in the tables of Energy Review are partly preliminary. The annual statistics published in Energy Review are presented in more detail in a publication called Energy Statistics that comes out yearly. Energy Statistics also includes historical time-series over a longer period of time (see e.g. Energy Statistics, Statistics Finland, Helsinki 2004.) The applied energy units and conversion coefficients are shown in the back cover of the Review. Explanatory notes to the statistical tables can be found after tables and figures. The figures presents: Changes in GDP, energy consumption and electricity consumption, Carbon dioxide emissions from fossile fuels use, Coal consumption, Consumption of natural gas, Peat consumption, Domestic oil deliveries, Import prices of oil, Consumer prices of principal oil products, Fuel prices in heat production, Fuel prices in electricity production, Price of electricity by type of consumer, Average monthly spot prices at the Nord pool power exchange, Total energy consumption by source and CO 2 -emissions, Supplies and total consumption of electricity GWh, Energy imports by country of origin in January-June 2003, Energy exports by recipient country in January-June 2003, Consumer prices of liquid fuels, Consumer prices of hard coal, natural gas and indigenous fuels, Price of natural gas by type of consumer, Price of electricity by type of consumer, Price of district heating by type of consumer, Excise taxes, value added taxes and fiscal charges and fees included in consumer prices of some energy sources and Energy taxes, precautionary stock fees and oil pollution fees
Statistical analysis of the count and profitability of air conditioners.
Rady, El Houssainy A; Mohamed, Salah M; Abd Elmegaly, Alaa A
2018-08-01
This article presents the statistical analysis of the number and profitability of air conditioners in an Egyptian company. Checking the same distribution for each categorical variable has been made using Kruskal-Wallis test.
Instrumental Neutron Activation Analysis and Multivariate Statistics for Pottery Provenance
Glascock, M. D.; Neff, H.; Vaughn, K. J.
2004-06-01
The application of instrumental neutron activation analysis and multivariate statistics to archaeological studies of ceramics and clays is described. A small pottery data set from the Nasca culture in southern Peru is presented for illustration.
Instrumental Neutron Activation Analysis and Multivariate Statistics for Pottery Provenance
International Nuclear Information System (INIS)
Glascock, M. D.; Neff, H.; Vaughn, K. J.
2004-01-01
The application of instrumental neutron activation analysis and multivariate statistics to archaeological studies of ceramics and clays is described. A small pottery data set from the Nasca culture in southern Peru is presented for illustration.
Application of Ontology Technology in Health Statistic Data Analysis.
Guo, Minjiang; Hu, Hongpu; Lei, Xingyun
2017-01-01
Research Purpose: establish health management ontology for analysis of health statistic data. Proposed Methods: this paper established health management ontology based on the analysis of the concepts in China Health Statistics Yearbook, and used protégé to define the syntactic and semantic structure of health statistical data. six classes of top-level ontology concepts and their subclasses had been extracted and the object properties and data properties were defined to establish the construction of these classes. By ontology instantiation, we can integrate multi-source heterogeneous data and enable administrators to have an overall understanding and analysis of the health statistic data. ontology technology provides a comprehensive and unified information integration structure of the health management domain and lays a foundation for the efficient analysis of multi-source and heterogeneous health system management data and enhancement of the management efficiency.
Instrumental Neutron Activation Analysis and Multivariate Statistics for Pottery Provenance
Energy Technology Data Exchange (ETDEWEB)
Glascock, M. D.; Neff, H. [University of Missouri, Research Reactor Center (United States); Vaughn, K. J. [Pacific Lutheran University, Department of Anthropology (United States)
2004-06-15
The application of instrumental neutron activation analysis and multivariate statistics to archaeological studies of ceramics and clays is described. A small pottery data set from the Nasca culture in southern Peru is presented for illustration.
Analysis of kinetic reaction mechanisms
Turányi, Tamás
2014-01-01
Chemical processes in many fields of science and technology, including combustion, atmospheric chemistry, environmental modelling, process engineering, and systems biology, can be described by detailed reaction mechanisms consisting of numerous reaction steps. This book describes methods for the analysis of reaction mechanisms that are applicable in all these fields. Topics addressed include: how sensitivity and uncertainty analyses allow the calculation of the overall uncertainty of simulation results and the identification of the most important input parameters, the ways in which mechanisms can be reduced without losing important kinetic and dynamic detail, and the application of reduced models for more accurate engineering optimizations. This monograph is invaluable for researchers and engineers dealing with detailed reaction mechanisms, but is also useful for graduate students of related courses in chemistry, mechanical engineering, energy and environmental science and biology.
Studies on quantum field theory and statistical mechanics
International Nuclear Information System (INIS)
Zhang, S.
1987-01-01
This dissertation is a summary of research in various areas of theoretical physics and is divided into three parts. In the first part, quantum fluctuations of the recently proposed superconducting cosmic strings are studied. It is found that vortices on the string world sheet represent an important class of fluctuation modes which tend to disorder the system. Both heuristic arguments and detailed renormalization group analysis reveal that these vortices do not appear in bound pairs but rather from a gas of free vortices. Based on this observation we argue that this fluctuation mode violates the topological conservation law on which superconductivity is based. Anomalies and topological aspects of supersymmetric quantum field theories are studied in the second part of this dissertation. Using the superspace formulation of the N = 1 spinning string, we obtain a path integral measure which is free from the world-sheet general coordinate as well as the supersymmetry anomalies and therefore determine the conformal anomaly and critical dimension of the spinning string. We also apply Fujikawa's formalism to computer the chiral anomaly in conformal as well as ordinary supergravity. Finally, we given a Noether-method construction of the supersymmetrized Chern-Simons term in five dimensional supergravity. In the last part of this dissertation, the soliton excitations in the quarter-filled Peierls-Hubbard model are investigated in both the large and the small U limit. For a strictly one dimensional system at zero temperature, we find that solitons in both limits are in one-to-one correspondence, while in the presence of weak three dimensional couplings or at finite temperature, the large U systems differ qualitatively from the small U systems in that the spin associated with the solitons ceases to be a sharp quantum observable
International Nuclear Information System (INIS)
2001-01-01
For the year 2000, part of the figures shown in the tables of the Energy Review are preliminary or estimated. The annual statistics of the Energy Review appear in more detail from the publication Energiatilastot - Energy Statistics issued annually, which also includes historical time series over a longer period (see e.g. Energiatilastot 1999, Statistics Finland, Helsinki 2000, ISSN 0785-3165). The inside of the Review's back cover shows the energy units and the conversion coefficients used for them. Explanatory notes to the statistical tables can be found after tables and figures. The figures presents: Changes in the volume of GNP and energy consumption, Changes in the volume of GNP and electricity, Coal consumption, Natural gas consumption, Peat consumption, Domestic oil deliveries, Import prices of oil, Consumer prices of principal oil products, Fuel prices for heat production, Fuel prices for electricity production, Carbon dioxide emissions from the use of fossil fuels, Total energy consumption by source and CO 2 -emissions, Electricity supply, Energy imports by country of origin in 2000, Energy exports by recipient country in 2000, Consumer prices of liquid fuels, Consumer prices of hard coal, natural gas and indigenous fuels, Average electricity price by type of consumer, Price of district heating by type of consumer, Excise taxes, value added taxes and fiscal charges and fees included in consumer prices of some energy sources and Energy taxes and precautionary stock fees on oil products
International Nuclear Information System (INIS)
2000-01-01
For the year 1999 and 2000, part of the figures shown in the tables of the Energy Review are preliminary or estimated. The annual statistics of the Energy Review appear in more detail from the publication Energiatilastot - Energy Statistics issued annually, which also includes historical time series over a longer period (see e.g., Energiatilastot 1998, Statistics Finland, Helsinki 1999, ISSN 0785-3165). The inside of the Review's back cover shows the energy units and the conversion coefficients used for them. Explanatory notes to the statistical tables can be found after tables and figures. The figures presents: Changes in the volume of GNP and energy consumption, Changes in the volume of GNP and electricity, Coal consumption, Natural gas consumption, Peat consumption, Domestic oil deliveries, Import prices of oil, Consumer prices of principal oil products, Fuel prices for heat production, Fuel prices for electricity production, Carbon dioxide emissions, Total energy consumption by source and CO 2 -emissions, Electricity supply, Energy imports by country of origin in January-March 2000, Energy exports by recipient country in January-March 2000, Consumer prices of liquid fuels, Consumer prices of hard coal, natural gas and indigenous fuels, Average electricity price by type of consumer, Price of district heating by type of consumer, Excise taxes, value added taxes and fiscal charges and fees included in consumer prices of some energy sources and Energy taxes and precautionary stock fees on oil products
International Nuclear Information System (INIS)
1999-01-01
For the year 1998 and the year 1999, part of the figures shown in the tables of the Energy Review are preliminary or estimated. The annual statistics of the Energy Review appear in more detail from the publication Energiatilastot - Energy Statistics issued annually, which also includes historical time series over a longer period (see e.g. Energiatilastot 1998, Statistics Finland, Helsinki 1999, ISSN 0785-3165). The inside of the Review's back cover shows the energy units and the conversion coefficients used for them. Explanatory notes to the statistical tables can be found after tables and figures. The figures presents: Changes in the volume of GNP and energy consumption, Changes in the volume of GNP and electricity, Coal consumption, Natural gas consumption, Peat consumption, Domestic oil deliveries, Import prices of oil, Consumer prices of principal oil products, Fuel prices for heat production, Fuel prices for electricity production, Carbon dioxide emissions, Total energy consumption by source and CO 2 -emissions, Electricity supply, Energy imports by country of origin in January-June 1999, Energy exports by recipient country in January-June 1999, Consumer prices of liquid fuels, Consumer prices of hard coal, natural gas and indigenous fuels, Average electricity price by type of consumer, Price of district heating by type of consumer, Excise taxes, value added taxes and fiscal charges and fees included in consumer prices of some energy sources and Energy taxes and precautionary stock fees on oil products
Propensity Score Analysis: An Alternative Statistical Approach for HRD Researchers
Keiffer, Greggory L.; Lane, Forrest C.
2016-01-01
Purpose: This paper aims to introduce matching in propensity score analysis (PSA) as an alternative statistical approach for researchers looking to make causal inferences using intact groups. Design/methodology/approach: An illustrative example demonstrated the varying results of analysis of variance, analysis of covariance and PSA on a heuristic…
A statistical design for testing apomictic diversification through linkage analysis.
Zeng, Yanru; Hou, Wei; Song, Shuang; Feng, Sisi; Shen, Lin; Xia, Guohua; Wu, Rongling
2014-03-01
The capacity of apomixis to generate maternal clones through seed reproduction has made it a useful characteristic for the fixation of heterosis in plant breeding. It has been observed that apomixis displays pronounced intra- and interspecific diversification, but the genetic mechanisms underlying this diversification remains elusive, obstructing the exploitation of this phenomenon in practical breeding programs. By capitalizing on molecular information in mapping populations, we describe and assess a statistical design that deploys linkage analysis to estimate and test the pattern and extent of apomictic differences at various levels from genotypes to species. The design is based on two reciprocal crosses between two individuals each chosen from a hermaphrodite or monoecious species. A multinomial distribution likelihood is constructed by combining marker information from two crosses. The EM algorithm is implemented to estimate the rate of apomixis and test its difference between two plant populations or species as the parents. The design is validated by computer simulation. A real data analysis of two reciprocal crosses between hickory (Carya cathayensis) and pecan (C. illinoensis) demonstrates the utilization and usefulness of the design in practice. The design provides a tool to address fundamental and applied questions related to the evolution and breeding of apomixis.
A statistical method for draft tube pressure pulsation analysis
International Nuclear Information System (INIS)
Doerfler, P K; Ruchonnet, N
2012-01-01
Draft tube pressure pulsation (DTPP) in Francis turbines is composed of various components originating from different physical phenomena. These components may be separated because they differ by their spatial relationships and by their propagation mechanism. The first step for such an analysis was to distinguish between so-called synchronous and asynchronous pulsations; only approximately periodic phenomena could be described in this manner. However, less regular pulsations are always present, and these become important when turbines have to operate in the far off-design range, in particular at very low load. The statistical method described here permits to separate the stochastic (random) component from the two traditional 'regular' components. It works in connection with the standard technique of model testing with several pressure signals measured in draft tube cone. The difference between the individual signals and the averaged pressure signal, together with the coherence between the individual pressure signals is used for analysis. An example reveals that a generalized, non-periodic version of the asynchronous pulsation is important at low load.
International Nuclear Information System (INIS)
2003-01-01
For the year 2002, part of the figures shown in the tables of the Energy Review are partly preliminary. The annual statistics of the Energy Review also includes historical time-series over a longer period (see e.g. Energiatilastot 2001, Statistics Finland, Helsinki 2002). The applied energy units and conversion coefficients are shown in the inside back cover of the Review. Explanatory notes to the statistical tables can be found after tables and figures. The figures presents: Changes in GDP, energy consumption and electricity consumption, Carbon dioxide emissions from fossile fuels use, Coal consumption, Consumption of natural gas, Peat consumption, Domestic oil deliveries, Import prices of oil, Consumer prices of principal oil products, Fuel prices in heat production, Fuel prices in electricity production, Price of electricity by type of consumer, Average monthly spot prices at the Nord pool power exchange, Total energy consumption by source and CO 2 -emissions, Supply and total consumption of electricity GWh, Energy imports by country of origin in January-June 2003, Energy exports by recipient country in January-June 2003, Consumer prices of liquid fuels, Consumer prices of hard coal, natural gas and indigenous fuels, Price of natural gas by type of consumer, Price of electricity by type of consumer, Price of district heating by type of consumer, Excise taxes, value added taxes and fiscal charges and fees included in consumer prices of some energy sources and Excise taxes, precautionary stock fees on oil pollution fees on energy products
International Nuclear Information System (INIS)
2004-01-01
For the year 2003 and 2004, the figures shown in the tables of the Energy Review are partly preliminary. The annual statistics of the Energy Review also includes historical time-series over a longer period (see e.g. Energiatilastot, Statistics Finland, Helsinki 2003, ISSN 0785-3165). The applied energy units and conversion coefficients are shown in the inside back cover of the Review. Explanatory notes to the statistical tables can be found after tables and figures. The figures presents: Changes in GDP, energy consumption and electricity consumption, Carbon dioxide emissions from fossile fuels use, Coal consumption, Consumption of natural gas, Peat consumption, Domestic oil deliveries, Import prices of oil, Consumer prices of principal oil products, Fuel prices in heat production, Fuel prices in electricity production, Price of electricity by type of consumer, Average monthly spot prices at the Nord pool power exchange, Total energy consumption by source and CO 2 -emissions, Supplies and total consumption of electricity GWh, Energy imports by country of origin in January-March 2004, Energy exports by recipient country in January-March 2004, Consumer prices of liquid fuels, Consumer prices of hard coal, natural gas and indigenous fuels, Price of natural gas by type of consumer, Price of electricity by type of consumer, Price of district heating by type of consumer, Excise taxes, value added taxes and fiscal charges and fees included in consumer prices of some energy sources and Excise taxes, precautionary stock fees on oil pollution fees
International Nuclear Information System (INIS)
2000-01-01
For the year 1999 and 2000, part of the figures shown in the tables of the Energy Review are preliminary or estimated. The annual statistics of the Energy also includes historical time series over a longer period (see e.g., Energiatilastot 1999, Statistics Finland, Helsinki 2000, ISSN 0785-3165). The inside of the Review's back cover shows the energy units and the conversion coefficients used for them. Explanatory notes to the statistical tables can be found after tables and figures. The figures presents: Changes in the volume of GNP and energy consumption, Changes in the volume of GNP and electricity, Coal consumption, Natural gas consumption, Peat consumption, Domestic oil deliveries, Import prices of oil, Consumer prices of principal oil products, Fuel prices for heat production, Fuel prices for electricity production, Carbon dioxide emissions, Total energy consumption by source and CO 2 -emissions, Electricity supply, Energy imports by country of origin in January-June 2000, Energy exports by recipient country in January-June 2000, Consumer prices of liquid fuels, Consumer prices of hard coal, natural gas and indigenous fuels, Average electricity price by type of consumer, Price of district heating by type of consumer, Excise taxes, value added taxes and fiscal charges and fees included in consumer prices of some energy sources and Energy taxes and precautionary stock fees on oil products
Basic statistical tools in research and data analysis
Directory of Open Access Journals (Sweden)
Zulfiqar Ali
2016-01-01
Full Text Available Statistical methods involved in carrying out a study include planning, designing, collecting data, analysing, drawing meaningful interpretation and reporting of the research findings. The statistical analysis gives meaning to the meaningless numbers, thereby breathing life into a lifeless data. The results and inferences are precise only if proper statistical tests are used. This article will try to acquaint the reader with the basic research tools that are utilised while conducting various studies. The article covers a brief outline of the variables, an understanding of quantitative and qualitative variables and the measures of central tendency. An idea of the sample size estimation, power analysis and the statistical errors is given. Finally, there is a summary of parametric and non-parametric tests used for data analysis.
Numeric computation and statistical data analysis on the Java platform
Chekanov, Sergei V
2016-01-01
Numerical computation, knowledge discovery and statistical data analysis integrated with powerful 2D and 3D graphics for visualization are the key topics of this book. The Python code examples powered by the Java platform can easily be transformed to other programming languages, such as Java, Groovy, Ruby and BeanShell. This book equips the reader with a computational platform which, unlike other statistical programs, is not limited by a single programming language. The author focuses on practical programming aspects and covers a broad range of topics, from basic introduction to the Python language on the Java platform (Jython), to descriptive statistics, symbolic calculations, neural networks, non-linear regression analysis and many other data-mining topics. He discusses how to find regularities in real-world data, how to classify data, and how to process data for knowledge discoveries. The code snippets are so short that they easily fit into single pages. Numeric Computation and Statistical Data Analysis ...
Analysis of room transfer function and reverberant signal statistics
DEFF Research Database (Denmark)
Georganti, Eleftheria; Mourjopoulos, John; Jacobsen, Finn
2008-01-01
For some time now, statistical analysis has been a valuable tool in analyzing room transfer functions (RTFs). This work examines existing statistical time-frequency models and techniques for RTF analysis (e.g., Schroeder's stochastic model and the standard deviation over frequency bands for the RTF...... magnitude and phase). RTF fractional octave smoothing, as with 1-slash 3 octave analysis, may lead to RTF simplifications that can be useful for several audio applications, like room compensation, room modeling, auralisation purposes. The aim of this work is to identify the relationship of optimal response...... and the corresponding ratio of the direct and reverberant signal. In addition, this work examines the statistical quantities for speech and audio signals prior to their reproduction within rooms and when recorded in rooms. Histograms and other statistical distributions are used to compare RTF minima of typical...
Statistical analysis of dynamic parameters of the core
International Nuclear Information System (INIS)
Ionov, V.S.
2007-01-01
The transients of various types were investigated for the cores of zero power critical facilities in RRC KI and NPP. Dynamic parameters of neutron transients were explored by tool statistical analysis. Its have sufficient duration, few channels for currents of chambers and reactivity and also some channels for technological parameters. On these values the inverse period. reactivity, lifetime of neutrons, reactivity coefficients and some effects of a reactivity are determinate, and on the values were restored values of measured dynamic parameters as result of the analysis. The mathematical means of statistical analysis were used: approximation(A), filtration (F), rejection (R), estimation of parameters of descriptive statistic (DSP), correlation performances (kk), regression analysis(KP), the prognosis (P), statistician criteria (SC). The calculation procedures were realized by computer language MATLAB. The reasons of methodical and statistical errors are submitted: inadequacy of model operation, precision neutron-physical parameters, features of registered processes, used mathematical model in reactivity meters, technique of processing for registered data etc. Examples of results of statistical analysis. Problems of validity of the methods used for definition and certification of values of statistical parameters and dynamic characteristics are considered (Authors)
Statistical mechanics provides novel insights into microtubule stability and mechanism of shrinkage.
Directory of Open Access Journals (Sweden)
Ishutesh Jain
2015-02-01
Full Text Available Microtubules are nano-machines that grow and shrink stochastically, making use of the coupling between chemical kinetics and mechanics of its constituent protofilaments (PFs. We investigate the stability and shrinkage of microtubules taking into account inter-protofilament interactions and bending interactions of intrinsically curved PFs. Computing the free energy as a function of PF tip position, we show that the competition between curvature energy, inter-PF interaction energy and entropy leads to a rich landscape with a series of minima that repeat over a length-scale determined by the intrinsic curvature. Computing Langevin dynamics of the tip through the landscape and accounting for depolymerization, we calculate the average unzippering and shrinkage velocities of GDP protofilaments and compare them with the experimentally known results. Our analysis predicts that the strength of the inter-PF interaction (E(s(m has to be comparable to the strength of the curvature energy (E(b(m such that E(s(m - E(b(m ≈ 1kBT, and questions the prevalent notion that unzippering results from the domination of bending energy of curved GDP PFs. Our work demonstrates how the shape of the free energy landscape is crucial in explaining the mechanism of MT shrinkage where the unzippered PFs will fluctuate in a set of partially peeled off states and subunit dissociation will reduce the length.
Gautestad, Arild O
2012-09-07
Animals moving under the influence of spatio-temporal scaling and long-term memory generate a kind of space-use pattern that has proved difficult to model within a coherent theoretical framework. An extended kind of statistical mechanics is needed, accounting for both the effects of spatial memory and scale-free space use, and put into a context of ecological conditions. Simulations illustrating the distinction between scale-specific and scale-free locomotion are presented. The results show how observational scale (time lag between relocations of an individual) may critically influence the interpretation of the underlying process. In this respect, a novel protocol is proposed as a method to distinguish between some main movement classes. For example, the 'power law in disguise' paradox-from a composite Brownian motion consisting of a superposition of independent movement processes at different scales-may be resolved by shifting the focus from pattern analysis at one particular temporal resolution towards a more process-oriented approach involving several scales of observation. A more explicit consideration of system complexity within a statistical mechanical framework, supplementing the more traditional mechanistic modelling approach, is advocated.
Statistical models and NMR analysis of polymer microstructure
Statistical models can be used in conjunction with NMR spectroscopy to study polymer microstructure and polymerization mechanisms. Thus, Bernoullian, Markovian, and enantiomorphic-site models are well known. Many additional models have been formulated over the years for additional situations. Typica...
Simulation Experiments in Practice: Statistical Design and Regression Analysis
Kleijnen, J.P.C.
2007-01-01
In practice, simulation analysts often change only one factor at a time, and use graphical analysis of the resulting Input/Output (I/O) data. The goal of this article is to change these traditional, naïve methods of design and analysis, because statistical theory proves that more information is obtained when applying Design Of Experiments (DOE) and linear regression analysis. Unfortunately, classic DOE and regression analysis assume a single simulation response that is normally and independen...
Statistical evaluation of the mechanical properties of high-volume class F fly ash concretes
Yoon, Seyoon
2014-03-01
High-Volume Fly Ash (HVFA) concretes are seen by many as a feasible solution for sustainable, low embodied carbon construction. At the moment, fly ash is classified as a waste by-product, primarily of thermal power stations. In this paper the authors experimentally and statistically investigated the effects of mix-design factors on the mechanical properties of high-volume class F fly ash concretes. A total of 240 and 32 samples were produced and tested in the laboratory to measure compressive strength and Young\\'s modulus respectively. Applicability of the CEB-FIP (Comite Euro-international du Béton - Fédération Internationale de la Précontrainte) and ACI (American Concrete Institute) Building Model Code (Thomas, 2010; ACI Committee 209, 1982) [1,2] to the experimentally-derived mechanical property data for HVFA concretes was established. Furthermore, using multiple linear regression analysis, Mean Squared Residuals (MSRs) were obtained to determine whether a weight- or volume-based mix proportion is better to predict the mechanical properties of HVFA concrete. The significance levels of the design factors, which indicate how significantly the factors affect the HVFA concrete\\'s mechanical properties, were determined using analysis of variance (ANOVA) tests. The results show that a weight-based mix proportion is a slightly better predictor of mechanical properties than volume-based one. The significance level of fly ash substitution rate was higher than that of w/b ratio initially but reduced over time. © 2014 Elsevier Ltd. All rights reserved.
STATISTICAL DISTRIBUTION PATTERNS IN MECHANICAL AND FATIGUE PROPERTIES OF METALLIC MATERIALS
Tatsuo, SAKAI; Masaki, NAKAJIMA; Keiro, TOKAJI; Norihiko, HASEGAWA; Department of Mechanical Engineering, Ritsumeikan University; Department of Mechanical Engineering, Toyota College of Technology; Department of Mechanical Engineering, Gifu University; Department of Mechanical Engineering, Gifu University
1997-01-01
Many papers on the statistical aspect of materials strength have been collected and reviewed by The Research Group for Statistical Aspects of Materials Strength.A book of "Statistical Aspects of Materials Strength" was written by this group, and published in 1992.Based on the experimental data compiled in this book, distribution patterns of mechanical properties are systematically surveyed paying an attention to metallic materials.Thus one can obtain the fundamental knowledge for a reliabilit...
Statistical analysis of planktic foraminifera of the surface Continental ...
African Journals Online (AJOL)
Planktic foraminiferal assemblage recorded from selected samples obtained from shallow continental shelf sediments off southwestern Nigeria were subjected to statistical analysis. The Principal Component Analysis (PCA) was used to determine variants of planktic parameters. Values obtained for these parameters were ...
Simulation Experiments in Practice : Statistical Design and Regression Analysis
Kleijnen, J.P.C.
2007-01-01
In practice, simulation analysts often change only one factor at a time, and use graphical analysis of the resulting Input/Output (I/O) data. Statistical theory proves that more information is obtained when applying Design Of Experiments (DOE) and linear regression analysis. Unfortunately, classic
Simulation Experiments in Practice : Statistical Design and Regression Analysis
Kleijnen, J.P.C.
2007-01-01
In practice, simulation analysts often change only one factor at a time, and use graphical analysis of the resulting Input/Output (I/O) data. The goal of this article is to change these traditional, naïve methods of design and analysis, because statistical theory proves that more information is
PRECISE - pregabalin in addition to usual care: Statistical analysis plan
S. Mathieson (Stephanie); L. Billot (Laurent); C. Maher (Chris); A.J. McLachlan (Andrew J.); J. Latimer (Jane); B.W. Koes (Bart); M.J. Hancock (Mark J.); I. Harris (Ian); R.O. Day (Richard O.); J. Pik (Justin); S. Jan (Stephen); C.-W.C. Lin (Chung-Wei Christine)
2016-01-01
textabstractBackground: Sciatica is a severe, disabling condition that lacks high quality evidence for effective treatment strategies. This a priori statistical analysis plan describes the methodology of analysis for the PRECISE study. Methods/design: PRECISE is a prospectively registered, double
A Divergence Statistics Extension to VTK for Performance Analysis
Energy Technology Data Exchange (ETDEWEB)
Pebay, Philippe Pierre [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bennett, Janine Camille [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2015-02-01
This report follows the series of previous documents ([PT08, BPRT09b, PT09, BPT09, PT10, PB13], where we presented the parallel descriptive, correlative, multi-correlative, principal component analysis, contingency, k -means, order and auto-correlative statistics engines which we developed within the Visualization Tool Kit ( VTK ) as a scalable, parallel and versatile statistics package. We now report on a new engine which we developed for the calculation of divergence statistics, a concept which we hereafter explain and whose main goal is to quantify the discrepancy, in a stasticial manner akin to measuring a distance, between an observed empirical distribution and a theoretical, "ideal" one. The ease of use of the new diverence statistics engine is illustrated by the means of C++ code snippets. Although this new engine does not yet have a parallel implementation, it has already been applied to HPC performance analysis, of which we provide an example.
HistFitter software framework for statistical data analysis
Baak, M.; Côte, D.; Koutsman, A.; Lorenz, J.; Short, D.
2015-01-01
We present a software framework for statistical data analysis, called HistFitter, that has been used extensively by the ATLAS Collaboration to analyze big datasets originating from proton-proton collisions at the Large Hadron Collider at CERN. Since 2012 HistFitter has been the standard statistical tool in searches for supersymmetric particles performed by ATLAS. HistFitter is a programmable and flexible framework to build, book-keep, fit, interpret and present results of data models of nearly arbitrary complexity. Starting from an object-oriented configuration, defined by users, the framework builds probability density functions that are automatically fitted to data and interpreted with statistical tests. A key innovation of HistFitter is its design, which is rooted in core analysis strategies of particle physics. The concepts of control, signal and validation regions are woven into its very fabric. These are progressively treated with statistically rigorous built-in methods. Being capable of working with mu...
Statistical analysis applied to safety culture self-assessment
International Nuclear Information System (INIS)
Macedo Soares, P.P.
2002-01-01
Interviews and opinion surveys are instruments used to assess the safety culture in an organization as part of the Safety Culture Enhancement Programme. Specific statistical tools are used to analyse the survey results. This paper presents an example of an opinion survey with the corresponding application of the statistical analysis and the conclusions obtained. Survey validation, Frequency statistics, Kolmogorov-Smirnov non-parametric test, Student (T-test) and ANOVA means comparison tests and LSD post-hoc multiple comparison test, are discussed. (author)
Longitudinal data analysis a handbook of modern statistical methods
Fitzmaurice, Garrett; Verbeke, Geert; Molenberghs, Geert
2008-01-01
Although many books currently available describe statistical models and methods for analyzing longitudinal data, they do not highlight connections between various research threads in the statistical literature. Responding to this void, Longitudinal Data Analysis provides a clear, comprehensive, and unified overview of state-of-the-art theory and applications. It also focuses on the assorted challenges that arise in analyzing longitudinal data. After discussing historical aspects, leading researchers explore four broad themes: parametric modeling, nonparametric and semiparametric methods, joint
Highly Robust Statistical Methods in Medical Image Analysis
Czech Academy of Sciences Publication Activity Database
Kalina, Jan
2012-01-01
Roč. 32, č. 2 (2012), s. 3-16 ISSN 0208-5216 R&D Projects: GA MŠk(CZ) 1M06014 Institutional research plan: CEZ:AV0Z10300504 Keywords : robust statistics * classification * faces * robust image analysis * forensic science Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 0.208, year: 2012 http://www.ibib.waw.pl/bbe/bbefulltext/BBE_32_2_003_FT.pdf
Network similarity and statistical analysis of earthquake seismic data
Deyasi, Krishanu; Chakraborty, Abhijit; Banerjee, Anirban
2016-01-01
We study the structural similarity of earthquake networks constructed from seismic catalogs of different geographical regions. A hierarchical clustering of underlying undirected earthquake networks is shown using Jensen-Shannon divergence in graph spectra. The directed nature of links indicates that each earthquake network is strongly connected, which motivates us to study the directed version statistically. Our statistical analysis of each earthquake region identifies the hub regions. We cal...
Mechanical tolerance stackup and analysis
Fischer, Bryan R
2004-01-01
BackgroundDimensioning and TolerancingTolerance Format and Decimal PlacesConverting Plus/Minus Dimensions and Tolerances into Equal Bilaterally Toleranced DimensionsVariation and Sources of VariationTolerance AnalysisWorst-case Tolerance StackupsStatistical Tolerance StackupsGeometric Dimensioning and Tolerancing (GD&T)Converting Plus/Minus Tolerancing to Positional Tolerancing and Projected Tolerance ZonesDiametral and Radial Tolerance StackupsSpecifying Material Condition Modifiers and Their Effect on Tolerance Stackups The Tolerance Stackup SketchThe Tolerance Stackup Report FormTolerance S
Conceptual developments of non-equilibrium statistical mechanics in the early days of Japan
Ichiyanagi, Masakazu
1995-11-01
This paper reviews the research in nonequilibrium statistical mechanics made in Japan in the period between 1930 and 1960. Nearly thirty years have passed since the discovery of the exact formula for the electrical conductivity. With the rise of the linear response theory, the methods and results of which are quickly grasped by anyone, its rationale was pushed aside and even at the stage where the formulation was still incomplete some authors hurried to make physical applications. Such an attitude robbed it of most of its interest for the average physicist, who would approach an understanding of some basic concept, not through abstract and logical analysis but by simply increasing his technical experiences with the concept. The purpose of this review is to rescue the linear response theory from being labeled a mathematical tool and to show that it has considerable physical content. Many key papers, originally written in Japanese, are reproduced.
The non-equilibrium statistical mechanics of a simple geophysical fluid dynamics model
Verkley, Wim; Severijns, Camiel
2014-05-01
Lorenz [1] has devised a dynamical system that has proved to be very useful as a benchmark system in geophysical fluid dynamics. The system in its simplest form consists of a periodic array of variables that can be associated with an atmospheric field on a latitude circle. The system is driven by a constant forcing, is damped by linear friction and has a simple advection term that causes the model to behave chaotically if the forcing is large enough. Our aim is to predict the statistics of Lorenz' model on the basis of a given average value of its total energy - obtained from a numerical integration - and the assumption of statistical stationarity. Our method is the principle of maximum entropy [2] which in this case reads: the information entropy of the system's probability density function shall be maximal under the constraints of normalization, a given value of the average total energy and statistical stationarity. Statistical stationarity is incorporated approximately by using `stationarity constraints', i.e., by requiring that the average first and possibly higher-order time-derivatives of the energy are zero in the maximization of entropy. The analysis [3] reveals that, if the first stationarity constraint is used, the resulting probability density function rather accurately reproduces the statistics of the individual variables. If the second stationarity constraint is used as well, the correlations between the variables are also reproduced quite adequately. The method can be generalized straightforwardly and holds the promise of a viable non-equilibrium statistical mechanics of the forced-dissipative systems of geophysical fluid dynamics. [1] E.N. Lorenz, 1996: Predictability - A problem partly solved, in Proc. Seminar on Predictability (ECMWF, Reading, Berkshire, UK), Vol. 1, pp. 1-18. [2] E.T. Jaynes, 2003: Probability Theory - The Logic of Science (Cambridge University Press, Cambridge). [3] W.T.M. Verkley and C.A. Severijns, 2014: The maximum entropy
Principles of classical statistical mechanics: A perspective from the notion of complementarity
International Nuclear Information System (INIS)
Velazquez Abad, Luisberis
2012-01-01
Quantum mechanics and classical statistical mechanics are two physical theories that share several analogies in their mathematical apparatus and physical foundations. In particular, classical statistical mechanics is hallmarked by the complementarity between two descriptions that are unified in thermodynamics: (i) the parametrization of the system macrostate in terms of mechanical macroscopic observablesI=(I i ), and (ii) the dynamical description that explains the evolution of a system towards the thermodynamic equilibrium. As expected, such a complementarity is related to the uncertainty relations of classical statistical mechanics ΔI i Δη i ≥k. Here, k is the Boltzmann constant, η i =∂S(I|θ)/∂I i are the restituting generalized forces derived from the entropy S(I|θ) of a closed system, which is found in an equilibrium situation driven by certain control parameters θ=(θ α ). These arguments constitute the central ingredients of a reformulation of classical statistical mechanics from the notion of complementarity. In this new framework, Einstein postulate of classical fluctuation theory dp(I|θ)∼exp[S(I|θ)/k]dI appears as the correspondence principle between classical statistical mechanics and thermodynamics in the limit k→0, while the existence of uncertainty relations can be associated with the non-commuting character of certain operators. - Highlights: ► There exists a direct analogy between quantum and classical statistical mechanics. ► Statistical form of Le Chatellier principle leads to the uncertainty principle. ► Einstein postulate is simply the correspondence principle. ► Complementary quantities are associated with non-commuting operators.
Mechanical tolerance stackup and analysis
Fischer, Bryan R
2011-01-01
Use Tolerance Analysis Techniques to Avoid Design, Quality, and Manufacturing Problems Before They Happen Often overlooked and misunderstood, tolerance analysis is a critical part of improving products and their design processes. Because all manufactured products are subject to variation, it is crucial that designers predict and understand how these changes can affect form, fit, and function of parts and assemblies--and then communicate their findings effectively. Written by one of the developers of ASME Y14.5 and other geometric dimension and tolerancing (GD&T) standards, Mechanical Tolerance
Statistical margin to DNB safety analysis approach for LOFT
International Nuclear Information System (INIS)
Atkinson, S.A.
1982-01-01
A method was developed and used for LOFT thermal safety analysis to estimate the statistical margin to DNB for the hot rod, and to base safety analysis on desired DNB probability limits. This method is an advanced approach using response surface analysis methods, a very efficient experimental design, and a 2nd-order response surface equation with a 2nd-order error propagation analysis to define the MDNBR probability density function. Calculations for limiting transients were used in the response surface analysis thereby including transient interactions and trip uncertainties in the MDNBR probability density
Data analysis using the Gnu R system for statistical computation
Energy Technology Data Exchange (ETDEWEB)
Simone, James; /Fermilab
2011-07-01
R is a language system for statistical computation. It is widely used in statistics, bioinformatics, machine learning, data mining, quantitative finance, and the analysis of clinical drug trials. Among the advantages of R are: it has become the standard language for developing statistical techniques, it is being actively developed by a large and growing global user community, it is open source software, it is highly portable (Linux, OS-X and Windows), it has a built-in documentation system, it produces high quality graphics and it is easily extensible with over four thousand extension library packages available covering statistics and applications. This report gives a very brief introduction to R with some examples using lattice QCD simulation results. It then discusses the development of R packages designed for chi-square minimization fits for lattice n-pt correlation functions.
Common pitfalls in statistical analysis: Linear regression analysis
Directory of Open Access Journals (Sweden)
Rakesh Aggarwal
2017-01-01
Full Text Available In a previous article in this series, we explained correlation analysis which describes the strength of relationship between two continuous variables. In this article, we deal with linear regression analysis which predicts the value of one continuous variable from another. We also discuss the assumptions and pitfalls associated with this analysis.
A novel statistic for genome-wide interaction analysis.
Directory of Open Access Journals (Sweden)
Xuesen Wu
2010-09-01
Full Text Available Although great progress in genome-wide association studies (GWAS has been made, the significant SNP associations identified by GWAS account for only a few percent of the genetic variance, leading many to question where and how we can find the missing heritability. There is increasing interest in genome-wide interaction analysis as a possible source of finding heritability unexplained by current GWAS. However, the existing statistics for testing interaction have low power for genome-wide interaction analysis. To meet challenges raised by genome-wide interactional analysis, we have developed a novel statistic for testing interaction between two loci (either linked or unlinked. The null distribution and the type I error rates of the new statistic for testing interaction are validated using simulations. Extensive power studies show that the developed statistic has much higher power to detect interaction than classical logistic regression. The results identified 44 and 211 pairs of SNPs showing significant evidence of interactions with FDR<0.001 and 0.001
Statistical Compilation of the ICT Sector and Policy Analysis | CRDI ...
International Development Research Centre (IDRC) Digital Library (Canada)
Statistical Compilation of the ICT Sector and Policy Analysis. As the presence and influence of information and communication technologies (ICTs) continues to widen and deepen, so too does its impact on economic development. However, much work needs to be done before the linkages between economic development ...
Multivariate statistical analysis of major and trace element data for ...
African Journals Online (AJOL)
Multivariate statistical analysis of major and trace element data for niobium exploration in the peralkaline granites of the anorogenic ring-complex province of Nigeria. PO Ogunleye, EC Ike, I Garba. Abstract. No Abstract Available Journal of Mining and Geology Vol.40(2) 2004: 107-117. Full Text: EMAIL FULL TEXT EMAIL ...
Statistical Compilation of the ICT Sector and Policy Analysis | IDRC ...
International Development Research Centre (IDRC) Digital Library (Canada)
Statistical Compilation of the ICT Sector and Policy Analysis. As the presence and influence of information and communication technologies (ICTs) continues to widen and deepen, so too does its impact on economic development. However, much work needs to be done before the linkages between economic development ...
Statistical analysis of the BOIL program in RSYST-III
International Nuclear Information System (INIS)
Beck, W.; Hausch, H.J.
1978-11-01
The paper describes a statistical analysis in the RSYST-III program system. Using the example of the BOIL program, it is shown how the effects of inaccurate input data on the output data can be discovered. The existing possibilities of data generation, data handling, and data evaluation are outlined. (orig.) [de
Statistical analysis of thermal conductivity of nanofluid containing ...
Indian Academy of Sciences (India)
Thermal conductivity measurements of nanofluids were analysed via two-factor completely randomized design and comparison of data means is carried out with Duncan's multiple-range test. Statistical analysis of experimental data show that temperature and weight fraction have a reasonable impact on the thermal ...
Multivariate statistical analysis of precipitation chemistry in Northwestern Spain
International Nuclear Information System (INIS)
Prada-Sanchez, J.M.; Garcia-Jurado, I.; Gonzalez-Manteiga, W.; Fiestras-Janeiro, M.G.; Espada-Rios, M.I.; Lucas-Dominguez, T.
1993-01-01
149 samples of rainwater were collected in the proximity of a power station in northwestern Spain at three rainwater monitoring stations. The resulting data are analyzed using multivariate statistical techniques. Firstly, the Principal Component Analysis shows that there are three main sources of pollution in the area (a marine source, a rural source and an acid source). The impact from pollution from these sources on the immediate environment of the stations is studied using Factorial Discriminant Analysis. 8 refs., 7 figs., 11 tabs
Implementation and statistical analysis of Metropolis algorithm for SU(3)
International Nuclear Information System (INIS)
Katznelson, E.; Nobile, A.
1984-12-01
In this paper we study the statistical properties of an implementation of the Metropolis algorithm for SU(3) gauge theory. It is shown that the results have normal distribution. We demonstrate that in this case error analysis can be carried on in a simple way and we show that applying it to both the measurement strategy and the output data analysis has an important influence on the performance and reliability of the simulation. (author)
Multivariate statistical analysis of precipitation chemistry in Northwestern Spain
Energy Technology Data Exchange (ETDEWEB)
Prada-Sanchez, J.M.; Garcia-Jurado, I.; Gonzalez-Manteiga, W.; Fiestras-Janeiro, M.G.; Espada-Rios, M.I.; Lucas-Dominguez, T. (University of Santiago, Santiago (Spain). Faculty of Mathematics, Dept. of Statistics and Operations Research)
1993-07-01
149 samples of rainwater were collected in the proximity of a power station in northwestern Spain at three rainwater monitoring stations. The resulting data are analyzed using multivariate statistical techniques. Firstly, the Principal Component Analysis shows that there are three main sources of pollution in the area (a marine source, a rural source and an acid source). The impact from pollution from these sources on the immediate environment of the stations is studied using Factorial Discriminant Analysis. 8 refs., 7 figs., 11 tabs.
Reducing bias in the analysis of counting statistics data
International Nuclear Information System (INIS)
Hammersley, A.P.; Antoniadis, A.
1997-01-01
In the analysis of counting statistics data it is common practice to estimate the variance of the measured data points as the data points themselves. This practice introduces a bias into the results of further analysis which may be significant, and under certain circumstances lead to false conclusions. In the case of normal weighted least squares fitting this bias is quantified and methods to avoid it are proposed. (orig.)
Fisher statistics for analysis of diffusion tensor directional information.
Hutchinson, Elizabeth B; Rutecki, Paul A; Alexander, Andrew L; Sutula, Thomas P
2012-04-30
A statistical approach is presented for the quantitative analysis of diffusion tensor imaging (DTI) directional information using Fisher statistics, which were originally developed for the analysis of vectors in the field of paleomagnetism. In this framework, descriptive and inferential statistics have been formulated based on the Fisher probability density function, a spherical analogue of the normal distribution. The Fisher approach was evaluated for investigation of rat brain DTI maps to characterize tissue orientation in the corpus callosum, fornix, and hilus of the dorsal hippocampal dentate gyrus, and to compare directional properties in these regions following status epilepticus (SE) or traumatic brain injury (TBI) with values in healthy brains. Direction vectors were determined for each region of interest (ROI) for each brain sample and Fisher statistics were applied to calculate the mean direction vector and variance parameters in the corpus callosum, fornix, and dentate gyrus of normal rats and rats that experienced TBI or SE. Hypothesis testing was performed by calculation of Watson's F-statistic and associated p-value giving the likelihood that grouped observations were from the same directional distribution. In the fornix and midline corpus callosum, no directional differences were detected between groups, however in the hilus, significant (pstatistical comparison of tissue structural orientation. Copyright © 2012 Elsevier B.V. All rights reserved.
HistFitter software framework for statistical data analysis
Energy Technology Data Exchange (ETDEWEB)
Baak, M. [CERN, Geneva (Switzerland); Besjes, G.J. [Radboud University Nijmegen, Nijmegen (Netherlands); Nikhef, Amsterdam (Netherlands); Cote, D. [University of Texas, Arlington (United States); Koutsman, A. [TRIUMF, Vancouver (Canada); Lorenz, J. [Ludwig-Maximilians-Universitaet Muenchen, Munich (Germany); Excellence Cluster Universe, Garching (Germany); Short, D. [University of Oxford, Oxford (United Kingdom)
2015-04-15
We present a software framework for statistical data analysis, called HistFitter, that has been used extensively by the ATLAS Collaboration to analyze big datasets originating from proton-proton collisions at the Large Hadron Collider at CERN. Since 2012 HistFitter has been the standard statistical tool in searches for supersymmetric particles performed by ATLAS. HistFitter is a programmable and flexible framework to build, book-keep, fit, interpret and present results of data models of nearly arbitrary complexity. Starting from an object-oriented configuration, defined by users, the framework builds probability density functions that are automatically fit to data and interpreted with statistical tests. Internally HistFitter uses the statistics packages RooStats and HistFactory. A key innovation of HistFitter is its design, which is rooted in analysis strategies of particle physics. The concepts of control, signal and validation regions are woven into its fabric. These are progressively treated with statistically rigorous built-in methods. Being capable of working with multiple models at once that describe the data, HistFitter introduces an additional level of abstraction that allows for easy bookkeeping, manipulation and testing of large collections of signal hypotheses. Finally, HistFitter provides a collection of tools to present results with publication quality style through a simple command-line interface. (orig.)
HistFitter software framework for statistical data analysis
International Nuclear Information System (INIS)
Baak, M.; Besjes, G.J.; Cote, D.; Koutsman, A.; Lorenz, J.; Short, D.
2015-01-01
We present a software framework for statistical data analysis, called HistFitter, that has been used extensively by the ATLAS Collaboration to analyze big datasets originating from proton-proton collisions at the Large Hadron Collider at CERN. Since 2012 HistFitter has been the standard statistical tool in searches for supersymmetric particles performed by ATLAS. HistFitter is a programmable and flexible framework to build, book-keep, fit, interpret and present results of data models of nearly arbitrary complexity. Starting from an object-oriented configuration, defined by users, the framework builds probability density functions that are automatically fit to data and interpreted with statistical tests. Internally HistFitter uses the statistics packages RooStats and HistFactory. A key innovation of HistFitter is its design, which is rooted in analysis strategies of particle physics. The concepts of control, signal and validation regions are woven into its fabric. These are progressively treated with statistically rigorous built-in methods. Being capable of working with multiple models at once that describe the data, HistFitter introduces an additional level of abstraction that allows for easy bookkeeping, manipulation and testing of large collections of signal hypotheses. Finally, HistFitter provides a collection of tools to present results with publication quality style through a simple command-line interface. (orig.)
STATCAT, Statistical Analysis of Parametric and Non-Parametric Data
International Nuclear Information System (INIS)
David, Hugh
1990-01-01
1 - Description of program or function: A suite of 26 programs designed to facilitate the appropriate statistical analysis and data handling of parametric and non-parametric data, using classical and modern univariate and multivariate methods. 2 - Method of solution: Data is read entry by entry, using a choice of input formats, and the resultant data bank is checked for out-of- range, rare, extreme or missing data. The completed STATCAT data bank can be treated by a variety of descriptive and inferential statistical methods, and modified, using other standard programs as required
Statistical analysis of absorptive laser damage in dielectric thin films
International Nuclear Information System (INIS)
Budgor, A.B.; Luria-Budgor, K.F.
1978-01-01
The Weibull distribution arises as an example of the theory of extreme events. It is commonly used to fit statistical data arising in the failure analysis of electrical components and in DC breakdown of materials. This distribution is employed to analyze time-to-damage and intensity-to-damage statistics obtained when irradiating thin film coated samples of SiO 2 , ZrO 2 , and Al 2 O 3 with tightly focused laser beams. The data used is furnished by Milam. The fit to the data is excellent; and least squared correlation coefficients greater than 0.9 are often obtained
Analytical and statistical analysis of elemental composition of lichens
International Nuclear Information System (INIS)
Calvelo, S.; Baccala, N.; Bubach, D.; Arribere, M.A.; Riberio Guevara, S.
1997-01-01
The elemental composition of lichens from remote southern South America regions has been studied with analytical and statistical techniques to determine if the values obtained reflect species, growth forms or habitat characteristics. The enrichment factors are calculated discriminated by species and collection site and compared with data available in the literature. The elemental concentrations are standardized and compared for different species. The information was statistically processed, a cluster analysis was performed using the three first principal axes of the PCA; the three groups formed are presented. Their relationship with the species, collection sites and the lichen growth forms are interpreted. (author)
Detecting errors in micro and trace analysis by using statistics
DEFF Research Database (Denmark)
Heydorn, K.
1993-01-01
By assigning a standard deviation to each step in an analytical method it is possible to predict the standard deviation of each analytical result obtained by this method. If the actual variability of replicate analytical results agrees with the expected, the analytical method is said...... to be in statistical control. Significant deviations between analytical results from different laboratories reveal the presence of systematic errors, and agreement between different laboratories indicate the absence of systematic errors. This statistical approach, referred to as the analysis of precision, was applied...
Multivariate statistical analysis of atom probe tomography data
International Nuclear Information System (INIS)
Parish, Chad M.; Miller, Michael K.
2010-01-01
The application of spectrum imaging multivariate statistical analysis methods, specifically principal component analysis (PCA), to atom probe tomography (APT) data has been investigated. The mathematical method of analysis is described and the results for two example datasets are analyzed and presented. The first dataset is from the analysis of a PM 2000 Fe-Cr-Al-Ti steel containing two different ultrafine precipitate populations. PCA properly describes the matrix and precipitate phases in a simple and intuitive manner. A second APT example is from the analysis of an irradiated reactor pressure vessel steel. Fine, nm-scale Cu-enriched precipitates having a core-shell structure were identified and qualitatively described by PCA. Advantages, disadvantages, and future prospects for implementing these data analysis methodologies for APT datasets, particularly with regard to quantitative analysis, are also discussed.
Using Pre-Statistical Analysis to Streamline Monitoring Assessments
International Nuclear Information System (INIS)
Reed, J.K.
1999-01-01
A variety of statistical methods exist to aid evaluation of groundwater quality and subsequent decision making in regulatory programs. These methods are applied because of large temporal and spatial extrapolations commonly applied to these data. In short, statistical conclusions often serve as a surrogate for knowledge. However, facilities with mature monitoring programs that have generated abundant data have inherently less uncertainty because of the sheer quantity of analytical results. In these cases, statistical tests can be less important, and ''expert'' data analysis should assume an important screening role.The WSRC Environmental Protection Department, working with the General Separations Area BSRI Environmental Restoration project team has developed a method for an Integrated Hydrogeological Analysis (IHA) of historical water quality data from the F and H Seepage Basins groundwater remediation project. The IHA combines common sense analytical techniques and a GIS presentation that force direct interactive evaluation of the data. The IHA can perform multiple data analysis tasks required by the RCRA permit. These include: (1) Development of a groundwater quality baseline prior to remediation startup, (2) Targeting of constituents for removal from RCRA GWPS, (3) Targeting of constituents for removal from UIC, permit, (4) Targeting of constituents for reduced, (5)Targeting of monitoring wells not producing representative samples, (6) Reduction in statistical evaluation, and (7) Identification of contamination from other facilities
Statistical mechanics of directed models of polymers in the square lattice
Rensburg, J V
2003-01-01
Directed square lattice models of polymers and vesicles have received considerable attention in the recent mathematical and physical sciences literature. These are idealized geometric directed lattice models introduced to study phase behaviour in polymers, and include Dyck paths, partially directed paths, directed trees and directed vesicles models. Directed models are closely related to models studied in the combinatorics literature (and are often exactly solvable). They are also simplified versions of a number of statistical mechanics models, including the self-avoiding walk, lattice animals and lattice vesicles. The exchange of approaches and ideas between statistical mechanics and combinatorics have considerably advanced the description and understanding of directed lattice models, and this will be explored in this review. The combinatorial nature of directed lattice path models makes a study using generating function approaches most natural. In contrast, the statistical mechanics approach would introduce...
Menzerath-Altmann Law: Statistical Mechanical Interpretation as Applied to a Linguistic Organization
Eroglu, Sertac
2014-10-01
The distribution behavior described by the empirical Menzerath-Altmann law is frequently encountered during the self-organization of linguistic and non-linguistic natural organizations at various structural levels. This study presents a statistical mechanical derivation of the law based on the analogy between the classical particles of a statistical mechanical organization and the distinct words of a textual organization. The derived model, a transformed (generalized) form of the Menzerath-Altmann model, was termed as the statistical mechanical Menzerath-Altmann model. The derived model allows interpreting the model parameters in terms of physical concepts. We also propose that many organizations presenting the Menzerath-Altmann law behavior, whether linguistic or not, can be methodically examined by the transformed distribution model through the properly defined structure-dependent parameter and the energy associated states.
Data management and statistical analysis for environmental assessment
International Nuclear Information System (INIS)
Wendelberger, J.R.; McVittie, T.I.
1995-01-01
Data management and statistical analysis for environmental assessment are important issues on the interface of computer science and statistics. Data collection for environmental decision making can generate large quantities of various types of data. A database/GIS system developed is described which provides efficient data storage as well as visualization tools which may be integrated into the data analysis process. FIMAD is a living database and GIS system. The system has changed and developed over time to meet the needs of the Los Alamos National Laboratory Restoration Program. The system provides a repository for data which may be accessed by different individuals for different purposes. The database structure is driven by the large amount and varied types of data required for environmental assessment. The integration of the database with the GIS system provides the foundation for powerful visualization and analysis capabilities
Explorations in statistics: the analysis of ratios and normalized data.
Curran-Everett, Douglas
2013-09-01
Learning about statistics is a lot like learning about science: the learning is more meaningful if you can actively explore. This ninth installment of Explorations in Statistics explores the analysis of ratios and normalized-or standardized-data. As researchers, we compute a ratio-a numerator divided by a denominator-to compute a proportion for some biological response or to derive some standardized variable. In each situation, we want to control for differences in the denominator when the thing we really care about is the numerator. But there is peril lurking in a ratio: only if the relationship between numerator and denominator is a straight line through the origin will the ratio be meaningful. If not, the ratio will misrepresent the true relationship between numerator and denominator. In contrast, regression techniques-these include analysis of covariance-are versatile: they can accommodate an analysis of the relationship between numerator and denominator when a ratio is useless.
Statistical analysis and interpolation of compositional data in materials science.
Pesenson, Misha Z; Suram, Santosh K; Gregoire, John M
2015-02-09
Compositional data are ubiquitous in chemistry and materials science: analysis of elements in multicomponent systems, combinatorial problems, etc., lead to data that are non-negative and sum to a constant (for example, atomic concentrations). The constant sum constraint restricts the sampling space to a simplex instead of the usual Euclidean space. Since statistical measures such as mean and standard deviation are defined for the Euclidean space, traditional correlation studies, multivariate analysis, and hypothesis testing may lead to erroneous dependencies and incorrect inferences when applied to compositional data. Furthermore, composition measurements that are used for data analytics may not include all of the elements contained in the material; that is, the measurements may be subcompositions of a higher-dimensional parent composition. Physically meaningful statistical analysis must yield results that are invariant under the number of composition elements, requiring the application of specialized statistical tools. We present specifics and subtleties of compositional data processing through discussion of illustrative examples. We introduce basic concepts, terminology, and methods required for the analysis of compositional data and utilize them for the spatial interpolation of composition in a sputtered thin film. The results demonstrate the importance of this mathematical framework for compositional data analysis (CDA) in the fields of materials science and chemistry.
Feature-Based Statistical Analysis of Combustion Simulation Data
Energy Technology Data Exchange (ETDEWEB)
Bennett, J; Krishnamoorthy, V; Liu, S; Grout, R; Hawkes, E; Chen, J; Pascucci, V; Bremer, P T
2011-11-18
We present a new framework for feature-based statistical analysis of large-scale scientific data and demonstrate its effectiveness by analyzing features from Direct Numerical Simulations (DNS) of turbulent combustion. Turbulent flows are ubiquitous and account for transport and mixing processes in combustion, astrophysics, fusion, and climate modeling among other disciplines. They are also characterized by coherent structure or organized motion, i.e. nonlocal entities whose geometrical features can directly impact molecular mixing and reactive processes. While traditional multi-point statistics provide correlative information, they lack nonlocal structural information, and hence, fail to provide mechanistic causality information between organized fluid motion and mixing and reactive processes. Hence, it is of great interest to capture and track flow features and their statistics together with their correlation with relevant scalar quantities, e.g. temperature or species concentrations. In our approach we encode the set of all possible flow features by pre-computing merge trees augmented with attributes, such as statistical moments of various scalar fields, e.g. temperature, as well as length-scales computed via spectral analysis. The computation is performed in an efficient streaming manner in a pre-processing step and results in a collection of meta-data that is orders of magnitude smaller than the original simulation data. This meta-data is sufficient to support a fully flexible and interactive analysis of the features, allowing for arbitrary thresholds, providing per-feature statistics, and creating various global diagnostics such as Cumulative Density Functions (CDFs), histograms, or time-series. We combine the analysis with a rendering of the features in a linked-view browser that enables scientists to interactively explore, visualize, and analyze the equivalent of one terabyte of simulation data. We highlight the utility of this new framework for combustion
Building the Community Online Resource for Statistical Seismicity Analysis (CORSSA)
Michael, A. J.; Wiemer, S.; Zechar, J. D.; Hardebeck, J. L.; Naylor, M.; Zhuang, J.; Steacy, S.; Corssa Executive Committee
2010-12-01
Statistical seismology is critical to the understanding of seismicity, the testing of proposed earthquake prediction and forecasting methods, and the assessment of seismic hazard. Unfortunately, despite its importance to seismology - especially to those aspects with great impact on public policy - statistical seismology is mostly ignored in the education of seismologists, and there is no central repository for the existing open-source software tools. To remedy these deficiencies, and with the broader goal to enhance the quality of statistical seismology research, we have begun building the Community Online Resource for Statistical Seismicity Analysis (CORSSA). CORSSA is a web-based educational platform that is authoritative, up-to-date, prominent, and user-friendly. We anticipate that the users of CORSSA will range from beginning graduate students to experienced researchers. More than 20 scientists from around the world met for a week in Zurich in May 2010 to kick-start the creation of CORSSA: the format and initial table of contents were defined; a governing structure was organized; and workshop participants began drafting articles. CORSSA materials are organized with respect to six themes, each containing between four and eight articles. The CORSSA web page, www.corssa.org, officially unveiled on September 6, 2010, debuts with an initial set of approximately 10 to 15 articles available online for viewing and commenting with additional articles to be added over the coming months. Each article will be peer-reviewed and will present a balanced discussion, including illustrative examples and code snippets. Topics in the initial set of articles will include: introductions to both CORSSA and statistical seismology, basic statistical tests and their role in seismology; understanding seismicity catalogs and their problems; basic techniques for modeling seismicity; and methods for testing earthquake predictability hypotheses. A special article will compare and review
CORSSA: Community Online Resource for Statistical Seismicity Analysis
Zechar, J. D.; Hardebeck, J. L.; Michael, A. J.; Naylor, M.; Steacy, S.; Wiemer, S.; Zhuang, J.
2011-12-01
Statistical seismology is critical to the understanding of seismicity, the evaluation of proposed earthquake prediction and forecasting methods, and the assessment of seismic hazard. Unfortunately, despite its importance to seismology-especially to those aspects with great impact on public policy-statistical seismology is mostly ignored in the education of seismologists, and there is no central repository for the existing open-source software tools. To remedy these deficiencies, and with the broader goal to enhance the quality of statistical seismology research, we have begun building the Community Online Resource for Statistical Seismicity Analysis (CORSSA, www.corssa.org). We anticipate that the users of CORSSA will range from beginning graduate students to experienced researchers. More than 20 scientists from around the world met for a week in Zurich in May 2010 to kick-start the creation of CORSSA: the format and initial table of contents were defined; a governing structure was organized; and workshop participants began drafting articles. CORSSA materials are organized with respect to six themes, each will contain between four and eight articles. CORSSA now includes seven articles with an additional six in draft form along with forums for discussion, a glossary, and news about upcoming meetings, special issues, and recent papers. Each article is peer-reviewed and presents a balanced discussion, including illustrative examples and code snippets. Topics in the initial set of articles include: introductions to both CORSSA and statistical seismology, basic statistical tests and their role in seismology; understanding seismicity catalogs and their problems; basic techniques for modeling seismicity; and methods for testing earthquake predictability hypotheses. We have also begun curating a collection of statistical seismology software packages.
Perceptual and statistical analysis of cardiac phase and amplitude images
International Nuclear Information System (INIS)
Houston, A.; Craig, A.
1991-01-01
A perceptual experiment was conducted using cardiac phase and amplitude images. Estimates of statistical parameters were derived from the images and the diagnostic potential of human and statistical decisions compared. Five methods were used to generate the images from 75 gated cardiac studies, 39 of which were classified as pathological. The images were presented to 12 observers experienced in nuclear medicine. The observers rated the images using a five-category scale based on their confidence of an abnormality presenting. Circular and linear statistics were used to analyse phase and amplitude image data, respectively. Estimates of mean, standard deviation (SD), skewness, kurtosis and the first term of the spatial correlation function were evaluated in the region of the left ventricle. A receiver operating characteristic analysis was performed on both sets of data and the human and statistical decisions compared. For phase images, circular SD was shown to discriminate better between normal and abnormal than experienced observers, but no single statistic discriminated as well as the human observer for amplitude images. (orig.)
State analysis of BOP using statistical and heuristic methods
International Nuclear Information System (INIS)
Heo, Gyun Young; Chang, Soon Heung
2003-01-01
Under the deregulation environment, the performance enhancement of BOP in nuclear power plants is being highlighted. To analyze performance level of BOP, we use the performance test procedures provided from an authorized institution such as ASME. However, through plant investigation, it was proved that the requirements of the performance test procedures about the reliability and quantity of sensors was difficult to be satisfied. As a solution of this, state analysis method that are the expanded concept of signal validation, was proposed on the basis of the statistical and heuristic approaches. Authors recommended the statistical linear regression model by analyzing correlation among BOP parameters as a reference state analysis method. Its advantage is that its derivation is not heuristic, it is possible to calculate model uncertainty, and it is easy to apply to an actual plant. The error of the statistical linear regression model is below 3% under normal as well as abnormal system states. Additionally a neural network model was recommended since the statistical model is impossible to apply to the validation of all of the sensors and is sensitive to the outlier that is the signal located out of a statistical distribution. Because there are a lot of sensors need to be validated in BOP, wavelet analysis (WA) were applied as a pre-processor for the reduction of input dimension and for the enhancement of training accuracy. The outlier localization capability of WA enhanced the robustness of the neural network. The trained neural network restored the degraded signals to the values within ±3% of the true signals
Computerized statistical analysis with bootstrap method in nuclear medicine
International Nuclear Information System (INIS)
Zoccarato, O.; Sardina, M.; Zatta, G.; De Agostini, A.; Barbesti, S.; Mana, O.; Tarolo, G.L.
1988-01-01
Statistical analysis of data samples involves some hypothesis about the features of data themselves. The accuracy of these hypotheses can influence the results of statistical inference. Among the new methods of computer-aided statistical analysis, the bootstrap method appears to be one of the most powerful, thanks to its ability to reproduce many artificial samples starting from a single original sample and because it works without hypothesis about data distribution. The authors applied the bootstrap method to two typical situation of Nuclear Medicine Department. The determination of the normal range of serum ferritin, as assessed by radioimmunoassay and defined by the mean value ±2 standard deviations, starting from an experimental sample of small dimension, shows an unacceptable lower limit (ferritin plasmatic levels below zero). On the contrary, the results obtained by elaborating 5000 bootstrap samples gives ans interval of values (10.95 ng/ml - 72.87 ng/ml) corresponding to the normal ranges commonly reported. Moreover the authors applied the bootstrap method in evaluating the possible error associated with the correlation coefficient determined between left ventricular ejection fraction (LVEF) values obtained by first pass radionuclide angiocardiography with 99m Tc and 195m Au. The results obtained indicate a high degree of statistical correlation and give the range of r 2 values to be considered acceptable for this type of studies
Statistical analysis of the Ft. Calhoun reactor coolant pump system
International Nuclear Information System (INIS)
Heising, Carolyn D.
1998-01-01
In engineering science, statistical quality control techniques have traditionally been applied to control manufacturing processes. An application to commercial nuclear power plant maintenance and control is presented that can greatly improve plant safety. As a demonstration of such an approach to plant maintenance and control, a specific system is analyzed: the reactor coolant pumps (RCPs) of the Ft. Calhoun nuclear power plant. This research uses capability analysis, Shewhart X-bar, R-charts, canonical correlation methods, and design of experiments to analyze the process for the state of statistical control. The results obtained show that six out of ten parameters are under control specifications limits and four parameters are not in the state of statistical control. The analysis shows that statistical process control methods can be applied as an early warning system capable of identifying significant equipment problems well in advance of traditional control room alarm indicators Such a system would provide operators with ample time to respond to possible emergency situations and thus improve plant safety and reliability. (author)
Statistical analysis of the Ft. Calhoun reactor coolant pump system
International Nuclear Information System (INIS)
Patel, Bimal; Heising, C.D.
1997-01-01
In engineering science, statistical quality control techniques have traditionally been applied to control manufacturing processes. An application to commercial nuclear power plant maintenance and control is presented that can greatly improve plant safety. As a demonstration of such an approach, a specific system is analyzed: the reactor coolant pumps (RCPs) of the Ft. Calhoun nuclear power plant. This research uses capability analysis, Shewhart X-bar, R charts, canonical correlation methods, and design of experiments to analyze the process for the state of statistical control. The results obtained show that six out of ten parameters are under control specification limits and four parameters are not in the state of statistical control. The analysis shows that statistical process control methods can be applied as an early warning system capable of identifying significant equipment problems well in advance of traditional control room alarm indicators. Such a system would provide operators with ample time to respond to possible emergency situations and thus improve plant safety and reliability. (Author)
STATISTICAL ANALYSIS OF THE HEAVY NEUTRAL ATOMS MEASURED BY IBEX
International Nuclear Information System (INIS)
Park, Jeewoo; Kucharek, Harald; Möbius, Eberhard; Galli, André; Livadiotis, George; Fuselier, Steve A.; McComas, David J.
2015-01-01
We investigate the directional distribution of heavy neutral atoms in the heliosphere by using heavy neutral maps generated with the IBEX-Lo instrument over three years from 2009 to 2011. The interstellar neutral (ISN) O and Ne gas flow was found in the first-year heavy neutral map at 601 keV and its flow direction and temperature were studied. However, due to the low counting statistics, researchers have not treated the full sky maps in detail. The main goal of this study is to evaluate the statistical significance of each pixel in the heavy neutral maps to get a better understanding of the directional distribution of heavy neutral atoms in the heliosphere. Here, we examine three statistical analysis methods: the signal-to-noise filter, the confidence limit method, and the cluster analysis method. These methods allow us to exclude background from areas where the heavy neutral signal is statistically significant. These methods also allow the consistent detection of heavy neutral atom structures. The main emission feature expands toward lower longitude and higher latitude from the observational peak of the ISN O and Ne gas flow. We call this emission the extended tail. It may be an imprint of the secondary oxygen atoms generated by charge exchange between ISN hydrogen atoms and oxygen ions in the outer heliosheath
Software for statistical data analysis used in Higgs searches
International Nuclear Information System (INIS)
Gumpert, Christian; Moneta, Lorenzo; Cranmer, Kyle; Kreiss, Sven; Verkerke, Wouter
2014-01-01
The analysis and interpretation of data collected by the Large Hadron Collider (LHC) requires advanced statistical tools in order to quantify the agreement between observation and theoretical models. RooStats is a project providing a statistical framework for data analysis with the focus on discoveries, confidence intervals and combination of different measurements in both Bayesian and frequentist approaches. It employs the RooFit data modelling language where mathematical concepts such as variables, (probability density) functions and integrals are represented as C++ objects. RooStats and RooFit rely on the persistency technology of the ROOT framework. The usage of a common data format enables the concept of digital publishing of complicated likelihood functions. The statistical tools have been developed in close collaboration with the LHC experiments to ensure their applicability to real-life use cases. Numerous physics results have been produced using the RooStats tools, with the discovery of the Higgs boson by the ATLAS and CMS experiments being certainly the most popular among them. We will discuss tools currently used by LHC experiments to set exclusion limits, to derive confidence intervals and to estimate discovery significances based on frequentist statistics and the asymptotic behaviour of likelihood functions. Furthermore, new developments in RooStats and performance optimisation necessary to cope with complex models depending on more than 1000 variables will be reviewed
Conditional Probability Analysis: A Statistical Tool for Environmental Analysis.
The use and application of environmental conditional probability analysis (CPA) is relatively recent. The first presentation using CPA was made in 2002 at the New England Association of Environmental Biologists Annual Meeting in Newport. Rhode Island. CPA has been used since the...
A statistical test for outlier identification in data envelopment analysis
Directory of Open Access Journals (Sweden)
Morteza Khodabin
2010-09-01
Full Text Available In the use of peer group data to assess individual, typical or best practice performance, the effective detection of outliers is critical for achieving useful results. In these ‘‘deterministic’’ frontier models, statistical theory is now mostly available. This paper deals with the statistical pared sample method and its capability of detecting outliers in data envelopment analysis. In the presented method, each observation is deleted from the sample once and the resulting linear program is solved, leading to a distribution of efficiency estimates. Based on the achieved distribution, a pared test is designed to identify the potential outlier(s. We illustrate the method through a real data set. The method could be used in a first step, as an exploratory data analysis, before using any frontier estimation.
Statistical analysis of the determinations of the Sun's Galactocentric distance
Malkin, Zinovy
2013-02-01
Based on several tens of R0 measurements made during the past two decades, several studies have been performed to derive the best estimate of R0. Some used just simple averaging to derive a result, whereas others provided comprehensive analyses of possible errors in published results. In either case, detailed statistical analyses of data used were not performed. However, a computation of the best estimates of the Galactic rotation constants is not only an astronomical but also a metrological task. Here we perform an analysis of 53 R0 measurements (published in the past 20 years) to assess the consistency of the data. Our analysis shows that they are internally consistent. It is also shown that any trend in the R0 estimates from the last 20 years is statistically negligible, which renders the presence of a bandwagon effect doubtful. On the other hand, the formal errors in the published R0 estimates improve significantly with time.
Statistical analysis of first period of operation of FTU Tokamak
International Nuclear Information System (INIS)
Crisanti, F.; Apruzzese, G.; Frigione, D.; Kroegler, H.; Lovisetto, L.; Mazzitelli, G.; Podda, S.
1996-09-01
On the FTU Tokamak the plasma physics operations started on the 20/4/90. The first plasma had a plasma current Ip=0.75 MA for about a second. The experimental phase lasted until 7/7/94, when a long shut-down begun for installing the toroidal limiter in the inner side of the vacuum vessel. In these four years of operations plasma experiments have been successfully exploited, e.g. experiments of single and multiple pellet injections; full current drive up to Ip=300 KA was obtained by using waves at the frequency of the Lower Hybrid; analysis of ohmic plasma parameters with different materials (from the low Z silicon to high Z tungsten) as plasma facing element was performed. In this work a statistical analysis of the full period of operation is presented. Moreover, a comparison with the statistical data from other Tokamaks is attempted
Statistics in experimental design, preprocessing, and analysis of proteomics data.
Jung, Klaus
2011-01-01
High-throughput experiments in proteomics, such as 2-dimensional gel electrophoresis (2-DE) and mass spectrometry (MS), yield usually high-dimensional data sets of expression values for hundreds or thousands of proteins which are, however, observed on only a relatively small number of biological samples. Statistical methods for the planning and analysis of experiments are important to avoid false conclusions and to receive tenable results. In this chapter, the most frequent experimental designs for proteomics experiments are illustrated. In particular, focus is put on studies for the detection of differentially regulated proteins. Furthermore, issues of sample size planning, statistical analysis of expression levels as well as methods for data preprocessing are covered.
Statistical analysis of RHIC beam position monitors performance
Calaga, R.; Tomás, R.
2004-04-01
A detailed statistical analysis of beam position monitors (BPM) performance at RHIC is a critical factor in improving regular operations and future runs. Robust identification of malfunctioning BPMs plays an important role in any orbit or turn-by-turn analysis. Singular value decomposition and Fourier transform methods, which have evolved as powerful numerical techniques in signal processing, will aid in such identification from BPM data. This is the first attempt at RHIC to use a large set of data to statistically enhance the capability of these two techniques and determine BPM performance. A comparison from run 2003 data shows striking agreement between the two methods and hence can be used to improve BPM functioning at RHIC and possibly other accelerators.
Statistical analysis of RHIC beam position monitors performance
Directory of Open Access Journals (Sweden)
R. Calaga
2004-04-01
Full Text Available A detailed statistical analysis of beam position monitors (BPM performance at RHIC is a critical factor in improving regular operations and future runs. Robust identification of malfunctioning BPMs plays an important role in any orbit or turn-by-turn analysis. Singular value decomposition and Fourier transform methods, which have evolved as powerful numerical techniques in signal processing, will aid in such identification from BPM data. This is the first attempt at RHIC to use a large set of data to statistically enhance the capability of these two techniques and determine BPM performance. A comparison from run 2003 data shows striking agreement between the two methods and hence can be used to improve BPM functioning at RHIC and possibly other accelerators.
Common pitfalls in statistical analysis: Odds versus risk
Ranganathan, Priya; Aggarwal, Rakesh; Pramesh, C. S.
2015-01-01
In biomedical research, we are often interested in quantifying the relationship between an exposure and an outcome. “Odds” and “Risk” are the most common terms which are used as measures of association between variables. In this article, which is the fourth in the series of common pitfalls in statistical analysis, we explain the meaning of risk and odds and the difference between the two. PMID:26623395
Statistical and machine learning approaches for network analysis
Dehmer, Matthias
2012-01-01
Explore the multidisciplinary nature of complex networks through machine learning techniques Statistical and Machine Learning Approaches for Network Analysis provides an accessible framework for structurally analyzing graphs by bringing together known and novel approaches on graph classes and graph measures for classification. By providing different approaches based on experimental data, the book uniquely sets itself apart from the current literature by exploring the application of machine learning techniques to various types of complex networks. Comprised of chapters written by internation
Statistical Challenges of Big Data Analysis in Medicine
Czech Academy of Sciences Publication Activity Database
Kalina, Jan
2015-01-01
Roč. 3, č. 1 (2015), s. 24-27 ISSN 1805-8698 R&D Projects: GA ČR GA13-23940S Grant - others:CESNET Development Fund(CZ) 494/2013 Institutional support: RVO:67985807 Keywords : big data * variable selection * classification * cluster analysis Subject RIV: BB - Applied Statistics, Operational Research http://www.ijbh.org/ijbh2015-1.pdf