WorldWideScience

Sample records for state-of-the-art systems developed

  1. State of the art survey of network operating systems development

    Science.gov (United States)

    1985-01-01

    The results of the State-of-the-Art Survey of Network Operating Systems (NOS) performed for Goddard Space Flight Center are presented. NOS functional characteristics are presented in terms of user communication data migration, job migration, network control, and common functional categories. Products (current or future) as well as research and prototyping efforts are summarized. The NOS products which are revelant to the space station and its activities are evaluated.

  2. State of the art in video system performance

    Science.gov (United States)

    Lewis, Michael J.

    1990-01-01

    The closed circuit television (CCTV) system that is onboard the Space Shuttle has the following capabilities: camera, video signal switching and routing unit (VSU); and Space Shuttle video tape recorder. However, this system is inadequate for use with many experiments that require video imaging. In order to assess the state-of-the-art in video technology and data storage systems, a survey was conducted of the High Resolution, High Frame Rate Video Technology (HHVT) products. The performance of the state-of-the-art solid state cameras and image sensors, video recording systems, data transmission devices, and data storage systems versus users' requirements are shown graphically.

  3. State-of-the-art Versus Time-triggered Object Tracking in Advanced Driver Assistance Systems

    Directory of Open Access Journals (Sweden)

    Moritz Koplin

    2013-04-01

    Full Text Available Most state-of-the-art driver assistance systems cannot guarantee that real-time images of object states are updated within a given time interval, because the object state observations are typically sampled by uncontrolled sensors and transmitted via an indeterministic bus system such as CAN. To overcome this shortcoming, a paradigm shift toward time-triggered advanced driver assistance systems based on a deterministic bus system, such as FlexRay, is under discussion. In order to prove the feasibility of this paradigm shift, this paper develops different models of a state-of-the-art and a time-triggered advanced driver assistance system based on multi-sensor object tracking and compares them with regard to their mean performance. The results show that while the state-of-the-art model is advantageous in scenarios with low process noise, it is outmatched by the time-triggered model in the case of high process noise, i.e., in complex situations with high dynamic.

  4. Summary of State-of-the-Art Power Conversion Systems for Energy Storage Applications

    Energy Technology Data Exchange (ETDEWEB)

    Atcitty, S.; Gray-Fenner, A.; Ranade, S.

    1998-09-01

    The power conversion system (PCS) is a vital part of many energy storage systems. It serves as the interface between the storage device, an energy source, and an AC load. This report summarizes the results of an extensive study of state-of-the-art power conversion systems used for energy storage applications. The purpose of the study was to investigate the potential for cost reduction and performance improvement in these power conversion systems and to provide recommendations for fiture research and development. This report provides an overview of PCS technology, a description of several state-of-the-art power conversion systems and how they are used in specific applications, a summary of four basic configurations for l:he power conversion systems used in energy storage applications, a discussion of PCS costs and potential cost reductions, a summary of the stancku-ds and codes relevant to the technology, and recommendations for future research and development.

  5. A state-of-the-art passive gamma-ray assay system

    International Nuclear Information System (INIS)

    Sampson, T.E.; Parker, J.L.; Cowder, L.R.; Kern, E.A.; Garcia, D.L.; Ensslin, N.

    1987-01-01

    We report details of the development of a high-accuracy, high-precision system for the non-destructive assay of 235 U in solution. The system can measure samples with concentrations ranging from 0.0001 to 500 g 235 U/l using 200-ml samples at low concentrations, 30-ml samples at high concentrations, and 1000-s measurement times. The accuracy and precision goals of 0.1% were essentially attained for concentrations above 100 g/l. This at-line system, designed for a production plant environment, represents a significant improvement in the state of the art

  6. State of the art Advanced Driver Assistance Systems (ADAS).

    NARCIS (Netherlands)

    OEI, H.-L.

    2017-01-01

    An overview of state-of-the-art ADA Advanced Driver Assistance systems is given. First a main structuring system for the ADA systems is presented, needed for purposes of relevancy, and consistency : the three phases in the accident process, i.e. pre-crash, crash and post-crash; the driving task at

  7. Flexible AC transmission systems: the state of the art

    Energy Technology Data Exchange (ETDEWEB)

    Edris, Abdel-Aty [Electric Power Research Inst., Palo Alto, CA (United States). Electric Systems Division

    1994-12-31

    Flexible AC transmission systems (FACTS) is a concept promoting the use of power electronic controllers to enhance the controllability and usable capacity of AC transmission. This paper presents the state of the art of FACTS and the status of the current projects for the application of the FACTS controllers in transmission systems. (author) 8 refs., 8 figs.

  8. The state-of-the-art Model M-2 Maintenance System

    International Nuclear Information System (INIS)

    Herndon, J.N.; Martin, H.L.; Satterlee, P.E. Jr.; Jelatis, D.G.; Jennrich, C.E.

    1984-01-01

    The Model M-2 Maintenance System is part of an ongoing program within the Consolidated Fuel Reprocessing Program (CFRP) at Oak Ridge National Laboratory (ORNL) to improve remote manipulation technology for future nuclear fuel reprocessing and other remote applications. Techniques, equipment, and guidelines which can improve the efficiency of remote maintenance are being developed. The Model M-2 Maintenance System, installed in the Integrated Equipment Test (IET) Facility at ORNL, provides a complete, integrated remote maintenance system for the demonstration and development of remote maintenance techniques. The system comprises a pair of force-reflecting servomanipulator arms, television viewing, lighting, and auxiliary lifting capabilities, thereby allowing manlike maintenance operations to be executed remotely within the remote cell mockup area in the IET. The Model M-2 Maintenance System incorporates an upgraded version of the proven Central Research Laboratories' Model M servomanipulator. Included are state-of-the-art brushless dc servomotors for improved performance, remotely removable wrist assemblies, geared azimuth drive, and a distributed microprocessor-based digital control system

  9. State-of-the-art

    DEFF Research Database (Denmark)

    Pecher, Arthur; Kofoed, Jens Peter

    This report presents a short overview on the state-of-the-art of wave tank testing of wave energy converters (WEC). Here for, it focuses mainly on the Phase 1 and 2 development phases of wave energy converters, as these are done in the wave tank (WEC), while the other development phases are perfo......This report presents a short overview on the state-of-the-art of wave tank testing of wave energy converters (WEC). Here for, it focuses mainly on the Phase 1 and 2 development phases of wave energy converters, as these are done in the wave tank (WEC), while the other development phases...

  10. Nuclear and radiation techniques - state of art and development trends

    International Nuclear Information System (INIS)

    Chmielewski, A.G.

    1995-01-01

    The state of art and development trends of nuclear and radiation techniques in Poland and worldwide have been presented. Among them the radiometric gages, radiation technologies, radiotracer methods and measuring systems for pipeline and vessels, brightness control have been described and their applications in industry, agriculture, health and environment protection have been shown and discussed. 35 refs, 1 fig

  11. State-of-the-art Model M-2 Maintenance System

    International Nuclear Information System (INIS)

    Herndon, J.N.; Martin, H.L.; Satterlee, P.E. Jr.; Jelatis, D.G.; Jennrich, C.E.

    1984-04-01

    The Model M-2 Maintenance System is part of an ongoing program within the Consolidated Fuel Reprocessing Program (CFRP) at Oak Ridge National Laboratory (ORNL) to improve remote manipulation technology for future nuclear fuel reprocessing and other remote applications. Techniques, equipment, and guidelines which can improve the efficiency of remote maintenance are being developed. The Model M-2 Maintenance System, installed in the Integrated Equipment Test (IET) Facility at ORNL, provides a complete, integrated remote maintenance system for the demonstration and development of remote maintenance techniques. The system comprises a pair of force-reflecting servomanipulator arms, television viewing, lighting, and auxiliary lifting capabilities, thereby allowing manlike maintenance operations to be executed remotely within the remote cell mockup area in the IET. The Model M-2 Maintenance System incorporates an upgraded version of the proven Central Research Laboratories' Model M servomanipulator. Included are state-of-the-art brushless dc servomotors for improved performance, remotely removable wrist assemblies, geared azimuth drive, and a distributed microprocessor-based digital control system. 5 references, 8 figures

  12. Remote mixed oxide fabrication facility development. Volume 2. State-of-the-art review of remote maintenance system technology

    International Nuclear Information System (INIS)

    Horgos, R.M.; Masch, M.L.

    1979-06-01

    This report provides a state-of-the-art review of remote systems technology, which includes manipulators, process connectors, vision systems and specialized process systems. A proposed mixed oxide fuel fabrication facility was reviewed and evaluated for identification of major remote maintenance and repair tasks. The technological areas were evaluated on the basis of their suitability or applicability for remote maintenance and repair of a proposed fully remote operating mixed oxide fuel fabrication facility. A technological base exists from which the design criteria for a reliable, remote operating facility can be established. Commercially available systems and components, along with those remote technologies now in development, will require modifications to adapt them to specific plant designs and requirements

  13. Fast reactors in Russia: State of the art and trends of development

    International Nuclear Information System (INIS)

    Poplavsky, V.M.; Ashurko, Yu.M.; Zverev, K.V.; Oshkanov, N.N.; Korol'kov, A.S.; Filin, A.I.

    2002-01-01

    This status report contains the following: facts on nuclear power in Russia from 2001-2002; plans for further development of nuclear power; state of the art on operation of fast reactors in 2002, namely BN-600, experimental reactors BOR-60 and BR-10; construction of NPP BN-800; participation in activities on BN-350 reactor decommissioning; description of trends of design studies in the field of fast reactors and accelerator driven systems

  14. Base technology development enhances state-of-the-art in meeting performance requirements

    International Nuclear Information System (INIS)

    Freedman, J.M.; Allen, G.C. Jr.; Luna, R.E.

    1987-01-01

    Sandia National Laboratories (SNL) has responsibility to the United States Department of Energy (DOE) for baseline technology to support the design of radioactive material transportation packages. To fulfill this responsibility, SNL works with industry, government agencies, and national laboratories to identify and develop state-of-the-art technology required to design and test safe, cost-effective radioactive materials packages. Principal elements of the base technology program include: 1) analysis techniques, 2) testing, 3) subsystem and component development, 4) packaging systems development support, and 5) technical support for policy development. These program elements support a systems approach for meeting performance requirements and assure that there is a sound underlying technical basis for both transportation packaging design and associated policy decisions. Highlights from the base technology program included in this paper are testing, design and analysis methods, advanced materials, risk assessment and logistics models, and transportation package support

  15. The state-of-the-art of ART sealants.

    Science.gov (United States)

    Frencken, Jo E

    2014-03-01

    Sealing caries-prone pits and fissure systems is an effective caries-preventive measure. There are basically two types of sealant materials: glass-ionomer and resin-based materials. Low- and medium-viscosity glass-ionomers were initially used and showed a low level of retention. With the advent of the ART approach in the mid-nineties, high-viscosity glass-ionomers were introduced as sealant material and the retention rate of ART sealants increased substantially. As the effectiveness of a sealant is measured by its capacity to prevent (dentine) carious lesion development, sealant retention is considered a surrogate endpoint. The ART sealant protocol is described. Systematic reviews and meta-analysis covering low- medium- and high-viscosity glass-ionomer (ART) sealants have concluded that there is no evidence that either glass-ionomer or resin-based sealants prevent dentine carious lesions better. The annual dentine carious lesion development in teeth with high-viscosity glass-ionomer ART sealants over the first three years is 1%. These ART sealants have a high capacity of preventing carious lesion development. Because no electricity and running water is required, ART sealants can be placed both inside and outside the dental surgery. High-viscosity glass-ionomer ART sealants can be used alongside resin-based sealants.41:119-124

  16. Solar heating systems: state-of-the-art and prospects for the future

    International Nuclear Information System (INIS)

    Frei, U.

    2001-01-01

    This article discusses the development of the use of solar collectors over their past 30 years of history and describes today's state-of-the-art for solar installations that are used for hot water preparation and space heating. Advances made in storage technology, in the dimensioning of installations and in the operation of the systems are discussed in detail. The importance of low-flow operation for hot water installations is emphasised. Also, the integration of solar and conventional heating systems is looked at and questions regarding further factors such as those encountered in low-energy-consumption buildings are discussed. Future developments in the product and market areas are looked at, including new forms of storage as well as solar cooling and air-conditioning

  17. State of the art magnetic resonance imaging

    International Nuclear Information System (INIS)

    Weissman, J.D.

    1987-01-01

    In less than a decade Magnetic Resonance Imaging (MRI) has evolved from a laboratory demonstration to a safe and effective technique for clinical diagnosis. This evolutionary process continues. At this time 2-D and 3-D imaging of the head and body is firmly established in clinical use. Surface coil imaging, two-component chemical shift imaging, in-vivo spectroscopy and flow imaging are currently in various stages of development. The present state of the art of MRI is a function of an array of technologies: magnet, Rf coil, Rf pulse amplifier, gradient coil and driver, pulse programmer, A/D converter, computer system architecture, array processors and mass storage (both magnetic and optical). The overall product design is the result of a complex process which balances the advantages and disadvantages of each component for optimal system performance and flexibility. The author discusses the organization of a state-of-the-art MRI system. Several examples of the kinds of system interactions affecting design choices are given. (Auth.)

  18. State of the art-hydraulic yaw systems for wind turbines

    DEFF Research Database (Denmark)

    Stubkier, Søren; Pedersen, Henrik C.; Andersen, Torben Ole

    2011-01-01

    This paper addresses the yawing systems of Horizontal Axis Wind Turbines (HAWT’s). HAWT’s represents close to all of the commercial large wind turbines sold today and must be considered state-of-the art within wind turbine technology. Two choices exists when considering components for the active ...

  19. Development of a state-of-the-art solid waste characterisation facility at JRC ISPRA

    International Nuclear Information System (INIS)

    Huhtiniemi, I.; Anselmi, M.; Hubert, P.; Vassallo, G.

    2003-01-01

    This paper will review the development and construction of a state-of-the-art waste characterisation facility that represents a fundamental element in the JRC's strategy to characterise radioactive wastes originating from four decades of nuclear research activities conducted at the Ispra Site. The state-of-the-art NDA measurement solution selected by JRC-Ispra will be presented in the light of special requirements imposed by applicable Italian legislation, norms and the qualities of the waste packages. The intended plant combines the state-of-the-art-measurement solution with comprehensive process automation in an industrial environment and is therefore of significant interest to the radioactive waste management community. (orig.)

  20. The state of the art of wind energy conversion systems and technologies: A review

    International Nuclear Information System (INIS)

    Cheng, Ming; Zhu, Ying

    2014-01-01

    Highlights: • This paper reviews the state of the art of wind energy conversion systems. • Different types of common wind energy conversion systems are classified and compared. • The four most popular MPPT control methods are reviewed and compared. • The latest development of wind energy conversion technologies is introduced. • Future trends of the wind energy conversion technologies are discussed. - Abstract: This paper gives a comprehensive review of the state of the art of wind energy conversion systems (WECS) and technologies, with an emphasis on wind power generator and control. First, different types of common WECSs are classified according to their features and drive train types. The WECSs are compared on the basis of the volume, weight, cost, efficiency, system reliability and fault ride through capability. The maximum power point tracking (MPPT) control, which aims to make the generator speed meet an optimum value to ensure the maximum energy yield, plays a key role in the variable speed WECSs. A comprehensive review and comparison of the four most popular MPPT control methods are carried out and improvements for each method are presented. Furthermore, the latest development of wind energy conversion technologies is introduced, such as the brushless doubly fed induction generator (BDFIG), the stator permanent magnet synchronous generators, the magnetic-geared generators, dual power flow WECS with the electrical variable transmission (EVT) machine, and direct grid-connected WECS. Finally, the future trends of the technologies are discussed

  1. Localized excitations in nonlinear complex systems current state of the art and future perspectives

    CERN Document Server

    Cuevas-Maraver, Jesús; Frantzeskakis, Dimitri; Karachalios, Nikos; Kevrekidis, Panayotis; Palmero-Acebedo, Faustino

    2014-01-01

    The study of nonlinear localized excitations is a long-standing challenge for research in basic and applied science, as well as engineering, due to their importance in understanding and predicting phenomena arising in nonlinear and complex systems, but also due to their potential for the development and design of novel applications. This volume is a compilation of chapters representing the current state-of-the-art on the field of localized excitations and their role in the dynamics of complex physical systems.

  2. A quick guide to wind power forecating : state-of-the-art 2009.

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, C.; Keko, H.; Bessa, R.; Miranda, V.; Botterud, A.; Wang, J.; Conzelmann, G.; Decision and Information Sciences; INESC Porto

    2009-11-20

    This document contains a summary of the main findings from our full report entitled 'Wind Power Forecasting: State-of-the-Art 2009'. The aims of this document are to provide guidelines and a quick overview of the current state-of-the-art in wind power forecasting (WPF) and to point out lines of research in the future development of forecasting systems.

  3. The state-of-the-art report for flow and pressure measurement techniques in the piping system

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Ho; Lee, Jeong Han; Kim, Bong Soo; Kim, Jong Man; Choi, Jong Hyun

    2002-12-01

    The sodium is widely used as one of the coolants in the liquid metal reactor system since it has important safety features such as a long thermal response time, a large margin to coolant boiling, and operating in near atmospheric pressure, etc. The state-of-the-art on the flow and pressure measurement techniques in the piping system worldwide is investigated and reviewed to utilize it as a basis for developing a new technique applying for the high temperature sodium flow environment.

  4. IBA's state of art Proton Therapy System

    International Nuclear Information System (INIS)

    Ternier, Sonja

    2001-01-01

    Full text: In recent years, IBA has developed a state-of-the-art Proton Therapy System that is currently being implemented at the Northeast Proton Therapy Center in Boston. First patient treatment is predicted for the fourth quarter of 2001. The IBA Proton Therapy System consists of a 230 MeV accelerator (a fixed energy isochronous cyclotron), an Energy Selection System that can decrease the energy down to 70 MeV and up to five treatment rooms. There are two types of treatment rooms. A gantry treatment room in which a patient can be treated from virtually any angle or a fixed horizontal beam line aimed at treatments of the of the head and neck. The system is equipped with a Therapy Control System and a Global Safety Management System. The Integrated Therapy Control System is an integrated system ensuring the control of the treatment sessions through independent but networked therapy control units and, therefore, the control of each equipment subsystem. The integrated safety management system, independent of the Therapy Control System, includes a set of hard-wired safety devices, ensuring the safety of the patient and personnel. The system will be capable of delivering proton treatments in four-treatment modes: Double Scattering, Single Scattering, Wobbling and Pencil Beam Scanning. The presentation will show the most important subsystems and treatment modes capabilities as well as the most recent advances in the technology. (author)

  5. National innovation system of Russia: state of the art and prospects of development

    Directory of Open Access Journals (Sweden)

    Viktoriya K. Makhortova

    2014-01-01

    Full Text Available Objective to characterize the national innovative system of Russia to identify its main features opportunities threats strengths and weaknesses the causes for the lag in innovation to formulate development priorities as well as the key principles for improving the national innovation system of Russia. Methods in this work were applied scientific methods of cognition generalization of the logical method analysis method of economic analysis method of expert estimations. Results SWOT analysis is compiled for the national innovation system of Russia its characteristic features and peculiarities are determined. The necessity of optimization and improvement of construction principles of the national innovation system of Russia is proved. Recommendations are given. Scientific novelty new recommendations for state innovation management are given and the existing ones are improved. In addition the proposed list of principles is grouped by significance. Practical value the possibility to optimize measures of the state innovation management in Russia to accelerate its exit from unsustainable status in this field and to strengthen the growth of innovative development.

  6. Geophysics of Geothermal Areas: State of the Art and Future Development

    Science.gov (United States)

    Mabey, Don R.

    In May 1980 a workshop organized by the Advanced School of Geophysics of the Ettore Majorana Center for Scientific Culture was held in Erice, Italy. The purpose was to present the state of the art and future development of geophysics as related to exploration for geothermal resources and the environmental impact of the development of geothermal systems. The workshop was addressed to “younger researchers working in scientific institutions and in public or private agencies and who are particularly interested in these aspects of the energy problem.” Fourteen formal lectures were presented to the workshop. This volume contains papers based on 10 of these lectures with a preface, forward, and introduction by the editors. The ten papers are “Heat Transfer in Geothermal Areas,” “Interpretation of Conductive Heat Flow Anomalies,” “Deep Electromagnetic Soundings in Geothermal Exploration,” “A Computation Method for dc Geoelectric Fields,” “Measurement of Ground Deformation in Geothermal Areas,” “Active Seismic Methods in Geothermal Exploration,” “The Role of Geophysical Investigations in the Discovery of the Latera Geothermal Field,” “Geothermal Resources Exploration in the European Community: The Geophysical Case,” “Activity Performed by AGIP (ENI Group) in the Field of Geothermal Energy,” and “Geothermal Exploration in the Western United States.” Six of the authors are from Italy, and one each is from Iceland, the Netherlands, West Germany, and the United States. All of the papers are in English.

  7. Multimodal Dialogue Management - State of the art

    NARCIS (Netherlands)

    Bui Huu Trung, B.H.T.

    This report is about the state of the art in dialogue management. We first introduce an overview of a multimodal dialogue system and its components. Second, four main approaches to dialogue management are described (finite-state and frame-based, information-state based and probabilistic, plan-based,

  8. The Art of the Renaissance Capitalist State

    Directory of Open Access Journals (Sweden)

    Rebeka Vidrih

    2007-12-01

    This article also highlights the fact that the concept of art developed in Florence – a city-state that played an important role in the early-capitalist world of the Renaissance, but never assumed a leading role like Venice and Genoa. »Art« was thus created through Florence’s efforts to demonstrate its equality and importance and, although it failed to achieve this in the field of the (capitalist economy, it at least succeeded in the field of the (absolutist state that was subordinate to this economy.

  9. Integrated Simulation for HVAC Performance Prediction: State-of-the-Art Illustration

    NARCIS (Netherlands)

    Hensen, J.L.M.; Clarke, J.A.

    2000-01-01

    This paper aims to outline the current state-of-the-art in integrated building simulation for performance prediction of heating, ventilating and air-conditioning (HVAC) systems. The ESP-r system is used as an example where integrated simulation is a core philosophy behind the development. The

  10. Fuel cells: state of the art

    International Nuclear Information System (INIS)

    Campanari, S.; Casalegno, A.

    2007-01-01

    This paper deals with the main features at present state-of-the-art fuel cell and hybrid cycle technologies, discussing their actual performance, possible applications, market entry perspectives and potential development [it

  11. The LIFE Laser Design in Context: A Comparison to the State-of-the-Art

    International Nuclear Information System (INIS)

    Deri, R.J.; Bayramian, A.J.; Erlandson, A.C.

    2011-01-01

    The current point design for the LIFE laser leverages decades of solid-state laser development in order to achieve the performance and attributes required for inertial fusion energy. This document provides a brief comparison of the LIFE laser point design to other state-of-the-art solid-state lasers. Table I compares the attributes of the current LIFE laser point design to other systems. the state-of-the-art for single-shot performance at fusion-relevant beamline energies is exemplified by performance observed on the National Ignition Facility. The state-of-the-art for high average power is exemplified by the Northrup Grumman JHPSSL laser. Several items in Table I deal with the laser efficiency; a more detailed discussion of efficiency can be found in reference 5. The electrical-to-optical efficiency of the LIFE design exceeds that of reference 4 due to the availability of higher efficiency laser diode pumps (70% vs. ∼50% used in reference 4). LIFE diode pumps are discussed in greater detail in reference 6. The 'beam steering' state of the art is represented by the deflection device that will be used in the LIFE laser, not a laser system. Inspection of Table I shows that most LIFE laser attributes have already been experimentally demonstrated. The two cases where the LIFE design is somewhat better than prior experimental work do not involve the development of new concepts: beamline power is increased simply by increasing aperture (as demonstrated by the power/aperture comparison in Table I), and efficiency increases are achieved by employing state-of-the-art diode pumps. In conclusion, the attributes anticipated for the LIFE laser are consistent with the demonstrated performance of existing solid-state lasers.

  12. State of the States, 2012: Arts Education State Policy Summary

    Science.gov (United States)

    Arts Education Partnership (NJ1), 2012

    2012-01-01

    The "State of the States 2012" summarizes state policies for arts education identified in statute or code for all 50 states and the District of Columbia. Information is based primarily on results from the AEP Arts Education State Policy Survey conducted in 2010-11, and updated in April 2012.

  13. Overview of ACTYS project on development of indigenous state-of-the-art code suites for nuclear activation analysis

    International Nuclear Information System (INIS)

    Subhash, P.V.; Tadepalli, Sai Chaitanya; Deshpande, Shishir P.; Kanth, Priti; Srinivasan, R.

    2017-01-01

    Rigorous activation calculations are warranted for safer and efficient design of future fusion machines. Suitable activation codes, which yield accurate results with faster performance yet include all fusion relevant reactions are a prerequisite. To meet these, an indigenous project called ACTYS-Project is initiated and as a result, four state-of-art codes are developed so far. The goal of this project is to develop indigenous state-of-the-art code suites for nuclear activation analysis

  14. CEN standards for solar thermal systems - State of the art and expectted impact

    NARCIS (Netherlands)

    Ree, B.G.C. van der; Pauschinger, Th.

    1996-01-01

    Since 1994, the European Committee for Standardization (CEN) Technical Committee TC 312 has been active in producing European Standards for thermal solar energy systems and components. In this paper, an overview of the present State of the Art of the draft standards is presented. These standards

  15. State of the art on construction automation and robotic system in domestic and foreign construction industry

    International Nuclear Information System (INIS)

    Lee, Sung Uk; Seo, Yong Chil; Jung, Seung Ho; Cho, Jai Wan; Choi, Young Soo

    2007-08-01

    In this report, we review the existing concept of construction automation and also survey the state of the art on construction automation and robotic system in domestic and foreign construction industry. On the basis of the result of review and survey, we want to suggest an applicable robotic technology to construction industry and points to be duly considered for activating construction automation. We investigate the state of the art on construction automation and robotic system in domestic and foreign construction industry and also applicable area and direction of domestic construction automation and robotic system. We hope that construction automation and robotic technology, which are improved rapidly nowadays, can contribute to the growth of construction industry

  16. Guide to state-of-the-art electron devices

    CERN Document Server

    2013-01-01

    Concise, high quality and comparative overview of state-of-the-art electron device development, manufacturing technologies and applications Guide to State-of-the-Art Electron Devices marks the 60th anniversary of the IEEE Electron Devices Committee and the 35th anniversary of the IEEE Electron Devices Society, as such it defines the state-of-the-art of electron devices, as well as future directions across the entire field. Spans full range of electron device types such as photovoltaic devices, semiconductor manufacturing and VLSI technology and circuits, covered by IEEE Electron and Devices Society Contributed by internationally respected members of the electron devices community A timely desk reference with fully-integrated colour and a unique lay-out with sidebars to highlight the key terms Discusses the historical developments and speculates on future trends to give a more rounded picture of the topics covered A valuable resource R&D managers; engineers in the semiconductor industry; applied scientists...

  17. The global rock art database: developing a rock art reference model for the RADB system using the CIDOC CRM and Australian heritage examples

    Science.gov (United States)

    Haubt, R. A.

    2015-08-01

    The Rock Art Database (RADB) is a virtual organisation that aims to build a global rock art community. It brings together rock art enthusiasts and professionals from around the world in one centralized location through the deployed publicly available RADB Management System. This online platform allows users to share, manage and discuss rock art information and offers a new look at rock art data through the use of new technologies in rich media formats. Full access to the growing platform is currently only available for a selected group of users but it already links over 200 rock art projects around the globe. This paper forms a part of the larger Rock Art Database (RADB) project. It discusses the design stage of the RADB System and the development of a conceptual RADB Reference Model (RARM) that is used to inform the design of the Rock Art Database Management System. It examines the success and failure of international and national systems and uses the Australian heritage sector and Australian rock art as a test model to develop a method for the RADB System design. The system aims to help improve rock art management by introducing the CIDOC CRM in conjunction with a rock art specific domain model. It seeks to improve data compatibility and data sharing to help with the integration of a variety of resources to create the global Rock Art Database Management System.

  18. Review studies on the state of the art of separate effects and component behaviour of LWR cooling systems

    International Nuclear Information System (INIS)

    Haefner, W.; Fischer, K.; Mewes, D.; Beckmann, H.

    1990-09-01

    In the frame of the Shared Cost Action (SCA) Reactor Safety 1985-87 programme Review Studies on the state of the art of separate effects and component behaviour (preparation for a possible future experimental programme) have been performed. The final reports of three of the selected topics closely related and of particular interest for the development of specific two-phase models are collected in this volume: - Contact condensation effects relevant to ECC-water injection into a cold leg main coolant pipe (Contract 3002-86-07 ELISPD, Battelle Frankfurt) - State of the art of two phase steam water flow in piping junctions (Contract 3006-86-07 ELISPF, CEA-CEN Grenoble) - Critical investigation and model development for countercurrent flow of gas and liquid in horizontal and vertical channels (Contract 3007-86-07 ELISPD, Universitat Hannover). Specific conclusions are drawn and recommendations are given in each of the three papers. A common conclusion is that for developing more general models applicable to a wider range of situations further experimental work needs to be done but with emphasis on larger pipe diameters of test sections up to 30 mm and increasing the system pressures. For better understanding the physical phenomena local parameters and their variations need to be measured more accurately by applying better and more advanced instrumentation

  19. The State of the Art Report on the Development and Manufacturing Technology of Test Blanket Module

    International Nuclear Information System (INIS)

    Lee, J. S.; Jeong, Y. H.; Park, S. Y.; Lee, M. H.; Choi, B. K.; Baek, J. H.; Park, J. Y.; Kim, J. H.; Kim, H. G.; Kim, K. H.

    2006-07-01

    The main objective of the present R and D on breeder blanket is the development of test blanket modules (TBMs) to be installed and tested in International Thermonuclear Experimental Reactor (ITER). In the program of the blanket development, a blanket module test in the ITER is scheduled from the beginning of the ITER operation, and the performance test of TBM in ITER is the most important milestone for the development of the DEMO blanket. The fabrication of TBMs has been required to test the basic performance of the DEMO blanket, i.e., tritium production/recovery, high-grade heat generation and radiation shielding. Therefore, the integration of the TBM systems into ITER has been investigated with the aim to check the safety, reliability and compatibility under nuclear fusion state. For this reason, in the Test Blanket Working Group (TBWG) as an activity of the International Energy Association (IEA), a variety of ITER TBMs have been proposed and investigated by each party: helium-cooled ceramic (WSG-1), helium-cooled LiPb (WSG-2), water-cooled ceramic (WSG-3), self-cooled lithium (WSG-4) and self-cooled molten salt (WSG-5) blanket systems. Because we are still deficient in investigation of TBM development, the need of development became pressing. In this report, for the development of TBM sub-module and mock-up, it is necessary to analyze and examine the state of the art on the development of manufacturing technology of TBM in other countries. And we will be applied as basic data to establish a manufacturing technology

  20. A Critical Review of the State-of-the-Art in Autonomous Land Vehicle Systems and Technology; TOPICAL

    International Nuclear Information System (INIS)

    DURRNAT-WHYTE, HUGH

    2001-01-01

    This report describes the current state-of-the-art in Autonomous Land Vehicle (ALV) systems and technology. Five functional technology areas are identified and addressed. For each a brief, subjective, preface is first provided which envisions the necessary technology for the deployment of an operational ALV system. Subsequently, a detailed literature review is provided to support and elaborate these views. It is further established how these five technology areas fit together as a functioning whole. The essential conclusion of this report is that the necessary sensors, algorithms and methods to develop and demonstrate an operationally viable all-terrain ALV already exist and could be readily deployed. A second conclusion is that the successful development of an operational ALV system will rely on an effective approach to systems engineering. In particular, a precise description of mission requirements and a clear definition of component functionality is essential

  1. Selected examples of intelligent (micro) sensor systems: state-of-the-art and tendencies

    Science.gov (United States)

    Hauptmann, Peter R.

    2006-03-01

    The capability of intelligent sensors to have more intelligence built into them continues to drive their application in areas including automotive, aerospace and defense, industrial, intelligent house and wear, medical and homeland security. In principle it is difficult to overestimate the importance of intelligent (micro) sensors or sensor systems within advanced societies but one characteristic feature is the global market for sensors, which is now about 20 billion annually. Therefore sensors or sensor systems play a dominant role in many fields from the macro sensor in manufacturing industry down to the miniaturized sensor for medical applications. The diversity of sensors precludes a complete description of the state-of-the-art; selected examples will illustrate the current situation. MEMS (microelectromechanical systems) devices are of special interest in the context of micro sensor systems. In past the main requirements of a sensor were in terms of metrological performance. The electrical (or optical) signal produced by the sensor needed to match the measure relatively accurately. Such basic functionality is no longer sufficient. Data processing near the sensor, the extraction of more information than just the direct sensor information by signal analysis, system aspects and multi-sensor information are the new demands. A shifting can be observed away from aiming to design perfect single-function transducers and towards the utilization of system-based sensors as system components. In the ideal case such systems contain sensors, actuators and electronics. They can be realized in monolithic, hybrid or discrete form—which kind is used depends on the application. In this article the state-of-the-art of intelligent sensors or sensor systems is reviewed using selected examples. Future trends are deduced.

  2. State Arts Policy: Trends and Future Prospects

    Science.gov (United States)

    Lowell, Julia F.

    2008-01-01

    State arts agencies (SAAs)--key players within the U.S. system of public support for the arts--face growing economic, political, and demographic challenges to the roles and missions they adopted when founded in the mid-1960s. This report, the fourth and final in a multiyear study, looks at state arts agencies' efforts to rethink their roles and…

  3. Digital Breast Tomosynthesis: State of the Art

    Science.gov (United States)

    Vedantham, Srinivasan; Vijayaraghavan, Gopal R.; Kopans, Daniel B.

    2015-01-01

    This topical review on digital breast tomosynthesis (DBT) is provided with the intent of describing the state of the art in terms of technology, results from recent clinical studies, advanced applications, and ongoing efforts to develop multimodality imaging systems that include DBT. Particular emphasis is placed on clinical studies. The observations of increase in cancer detection rates, particularly for invasive cancers, and the reduction in false-positive rates with DBT in prospective trials indicate its benefit for breast cancer screening. Retrospective multireader multicase studies show either noninferiority or superiority of DBT compared with mammography. Methods to curtail radiation dose are of importance. © RSNA, 2015 PMID:26599926

  4. Utilizing media arts principles for developing effective interactive neurorehabilitation systems.

    Science.gov (United States)

    Rikakis, Thanassis

    2011-01-01

    This paper discusses how interactive neurorehabilitation systems can increase their effectiveness through systematic integration of media arts principles and practice. Media arts expertise can foster the development of complex yet intuitive extrinsic feedback displays that match the inherent complexity and intuitive nature of motor learning. Abstract, arts-based feedback displays can be powerful metaphors that provide re-contextualization, engagement and appropriate reward mechanisms for mature adults. Such virtual feedback displays must be seamlessly integrated with physical components to produce mixed reality training environments that promote active, generalizable learning. The proposed approaches are illustrated through examples from mixed reality rehabilitation systems developed by our team.

  5. A state of the art on metallic fuel technology development

    International Nuclear Information System (INIS)

    Hwang, Woan; Kang, Hee Young; Nam, Cheol; Kim, Jong Oh

    1997-01-01

    Since worldwide interest turned toward ceramic fuels before the full potential of metallic fuel could be achieved in the late 1960's, the development of metallic fuels continued throughout the 1970's at ANL's experimental breeder reactor II (EBR-II) because EBR-II continued to be fueled with the metallic uranium-fissium alloy, U-5Fs. During this decade the performance limitations of metallic fuel were satisfactorily resolved resolved at EBR-II. The concept of the IFR developed at ANL since 1984. The technical feasibility had been demonstrated and the technology database had been established to support its practicality. One key features of the IFR is that the fuel is metallic, which brings pronounced benefits over oxide in improved inherent safety and lower processing costs. At the outset of the 1980's, it appeared that metallic fuels are recognized as a professed viable option with regard to safety, integral fuel cycle, waste minimization and deployment economics. This paper reviews the key advances in the last score and summarizes the state-of the art on metallic fuel technology development. (author). 29 refs., 1 tab

  6. STATE-OF-THE-ART TASKS AND ACHIEVEMENTS OF PARALINGUISTIC SPEECH ANALYSIS SYSTEMS

    Directory of Open Access Journals (Sweden)

    A. A. Karpov

    2016-07-01

    Full Text Available We present analytical survey of state-of-the-art actual tasks in the area of computational paralinguistics, as well as the recent achievements of automatic systems for paralinguistic analysis of conversational speech. Paralinguistics studies non-verbal aspects of human communication and speech such as: natural emotions, accents, psycho-physiological states, pronunciation features, speaker’s voice parameters, etc. We describe architecture of a baseline computer system for acoustical paralinguistic analysis, its main components and useful speech processing methods. We present some information on an International contest called Computational Paralinguistics Challenge (ComParE, which is held each year since 2009 in the framework of the International conference INTERSPEECH organized by the International Speech Communication Association. We present sub-challenges (tasks that were proposed at the ComParE Challenges in 2009-2016, and analyze winning computer systems for each sub-challenge and obtained results. The last completed ComParE-2015 Challenge was organized in September 2015 in Germany and proposed 3 sub-challenges: 1 Degree of Nativeness (DN sub-challenge, determination of nativeness degree of speakers based on acoustics; 2 Parkinson's Condition (PC sub-challenge, recognition of a degree of Parkinson’s condition based on speech analysis; 3 Eating Condition (EC sub-challenge, determination of the eating condition state during speaking or a dialogue, and classification of consumed food type (one of seven classes of food by the speaker. In the last sub-challenge (EC, the winner was a joint Turkish-Russian team consisting of the authors of the given paper. We have developed the most efficient computer-based system for detection and classification of the corresponding (EC acoustical paralinguistic events. The paper deals with the architecture of this system, its main modules and methods, as well as the description of used training and evaluation

  7. Evaluation of State-of-the-Art Acoustic Feedback Cancellation Systems for Hearing Aids

    DEFF Research Database (Denmark)

    Guo, Meng; Jensen, Søren Holdt; Jensen, Jesper

    2013-01-01

    This research evaluates four state-of-the-art acoustic feedback cancellation systems in hearing aids in terms of the cancellation performance, sound quality degradation, and computational complexity. The authors compared a traditional full-band system to a system with a prediction error method...... in a full band, a subband system, a subband system with frequency shifting, and a recently proposed subband system with a novel probe noise deployment. All systems outperformed the traditional full-band system in cancellation performance, especially the subband system with probe noise is most effective...... for cancellation. However, in all cases there was a trade-off between performance and computational cost. With a 3-times increase in computation load, the probe noise based cancellation system can be realized that functions even in the most challenging feedback situation....

  8. Cultivating Demand for the Arts: Arts Learning, Arts Engagement, and State Arts Policy. Summary

    Science.gov (United States)

    Zakaras, Laura; Lowell, Julia F.

    2008-01-01

    The findings summarized in this report are intended to shed light on what it means to cultivate demand for the arts, why it is necessary and important to cultivate this demand, and what state arts agencies (SAAs) and other arts and education policymakers can do to help. The research considered only the benchmark arts central to public policy:…

  9. State of the art on the probabilistic safety assessment (P.S.A.)

    International Nuclear Information System (INIS)

    Devictor, N.; Bassi, A.; Saignes, P.; Bertrand, F.

    2008-01-01

    The use of Probabilistic Safety Assessment (PSA) is internationally increasing as a means of assessing and improving the safety of nuclear and non-nuclear facilities. To support the development of a competence on Probabilistic Safety Assessment, a set of states of the art regarding these tools and their use has been made between 2001 and 2005, in particular on the following topics: - Definition of the PSA of level 1, 2 and 3; - Use of PSA in support to design and operation of nuclear plants (risk-informed applications); - Applications to Non Reactor Nuclear Facilities. The report compiled in a single document these states of the art in order to ensure a broader use; this work has been done in the frame of the Project 'Reliability and Safety of Nuclear Facility' of the Nuclear Development and Innovation Division of the Nuclear Energy Division. As some of these states of the art have been made in support to exchanges with international partners and were written in English, a section of this document is written in English. This work is now applied concretely in support to the design of 4. Generation nuclear systems as Sodium-cooled Fast Reactors and especially Gas-cooled Fast Reactor, that have been the subject of communications during the conferences ANS (Annual Meeting 2007), PSA'08, ICCAP'08 and in the journal Science and Technology of Nuclear Installations. (authors)

  10. State of the art of superconducting fault current limiters and their application to the electric power system

    International Nuclear Information System (INIS)

    Morandi, Antonio

    2013-01-01

    Highlights: ► The state of the art of superconducting fault current limiters is reviewed. ► An innovative concept of FCL is discussed and the potential of MgB 2 is outlined. ► The use of FCL to allow more interconnection of MV bus-bar is discussed. ► The use of FCL to increase the immunity from voltage dips is discussed. ► The use of FCL to integrate more distributed generation is pointed out. -- Abstract: Modern electric power systems are becoming more and more complex in order to meet new needs. Nowadays a high power quality is mandatory and there is the need to integrate increasing amounts of on-site generation. All this translates in more sophisticated electric network with intrinsically high short circuit rate. This network is vulnerable in case of fault and special protection apparatus and procedures needs to be developed in order to avoid costly or even irreversible damage. A superconducting fault current limiter (SFCL) is a device with a negligible impedance in normal operating conditions that reliably switches to a high impedance state in case of extra-current. Such a device is able to increase the short circuit power of an electric network and to contemporarily eliminate the hazard during the fault. It can be regarded as a key component for future electric power systems. In this paper the state of the art of superconducting fault current limiters mature for applications is briefly resumed and the potential impact of this device on the paradigm of design and operation of power systems is analyzed. In particular the use of the FCL as a mean to allow more interconnection of MV bus-bars as well an increased immunity with respect to the voltage disturbances induced by critical customer is discussed. The possibility to integrate more distributed generation in the distribution grid is also considered

  11. Solar water detoxification: state of the art of the research in Spain

    International Nuclear Information System (INIS)

    Perez Martinez, M.; Cuesta Santianes, J.; Cabrera Jimenez, J. A.; Garcia Garcia, D.; Trevino Sanchez, A. C.; Berges Garcia, A.

    2010-01-01

    The CIEMAT's Foresight and Technology Watch Unit, whose technology watch management system is certified by Aenor as per standards UNE 16006:2006, has developed this study in order to review the state of the art of national research on solar water detoxification. to reach this goal, data bases of scientific publications, research projects and patents have been used. The technology watch information management solution VICUBO, developed by E-intelligent, was used as support tool for the afore-mentioned standard. (Author) 3 refs.

  12. Computerized systems for on-line management of failures: a state-of-the-art discussion of alarm systems and diagnostic systems applied in the nuclear industry

    International Nuclear Information System (INIS)

    Kim, I.S.

    1994-01-01

    It is now well perceived in the nuclear industry that improving plant information systems is vital for enhancing the operational safety of nuclear power plants. Considerable work is underway worldwide to support operators' decision-making, particularly in their difficult tasks of managing process anomalies on-line. The work includes development of (1) advanced alarm systems, such as various kinds of computer-based alarm processing systems, Critical Function Monitoring System, Success Path Monitoring System and Safety Assessment System II, and (2) real-timer diagnostic systems, such as Disturbance Analysis System, Maryland Operator Advisory System II, Model-Integrated Diagnostic Analysis System, Diagnosis System using Knowledge Engineering Technique, Detailed Diagnosis, and Operator Advisor System. This paper presents a state-of-the-art review of plant information systems for on-line management of failures in nuclear power plants, focusing on the methodological features of computerized alarm systems and diagnostic systems. (author)

  13. Ascertaining the international state of the art of PSA methodology

    International Nuclear Information System (INIS)

    Linden, J. von

    1998-01-01

    Plant-specific PSAs, to be performed within the framework of the Periodic Safety Review of German Nuclear Power Plants require further development of the methodology. For that purpose foreign PSA-guidelines and PSA-reviewes as well as relevant literature are examined and appropriate insights are adopted within task A.2 of project SR 2096. The main goal of these activities is to achieve a comparison of the state of the art of PSA-methodologies applied abroad and in Germany. The German state of the art refers to the extent as is documented in the German PSA Guide (Leitfaden Probabilistische Sicherheitsanalyse /PSUe97/) which has to be used for the Periodic Safety Review of German Nuclear Power Plants. The structure for the evaluation is based on the working steps of a PSA. In total, according to the objectives of the Periodic Safety Review the German approach for plant-specific PSAs based on the German PSA Guide is conform to the state of the art abroad. Identified deviations in some details are evaluated reflecting the view of GRS. Particular aspects resulting from the evaluation should be considered for further development of the German PSA Guide. (orig.) [de

  14. A study of the state of the art on the determination of the threshold values of the performance indicators for safety systems and initiating events of nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Kang, D. I.; Kim, K. Y.; Hwang, M. J.; Park, J. H.; Ha, J. J

    2004-02-01

    The threshold values of Korean Institute of Nuclear Safety (KINS) Performance Indicators (PIs)' determining the safety class of initiating events and safety systems can not sufficiently reflect the operating experience and PSA results of domestic NPPs. Therefore, the state of arts on the PI study of domestic and foreign countries is analyzed in order to reflect the operating experience and PSA results of domestic NPPs in the determination of the threshold values of the PIs for safety systems and initiating events of domestic NPPs. We identified the state of arts of PIs through reviewing the objectives and types of WANO, IAEA, NRC, OECD/NEA and domestic PIs, and the technical issues of the threshold values of SECY 99-007 and NUREG-1753. We also, identified the current status of recently developed MSPI (Mitigating System Performance Index) and IIIEI (Integrated Industry Initiating Event Indicator). From this study of the state of the arts on the PIs, we expect that if the NRC's MSPI and a PI similar to NRC's IIIEI would be introduced into the KINS, it is not necessary to determine the threshold values of PIs applied to the safety systems and initiating events of entire domestic NPPs. Otherwise the threshold values of PIs applied to the individual NPP should be developed using PSA models of typical reactor types. For the active development and use of the risk informed PIs for the domestic NPPs, we expect that the system and component reliability analysis and initiating events analysis for the domestic NPPs, MSPI, IIIEI, and PSA requirements for the PIs be further studied.

  15. Support for Arts Education. State Arts Agency Fact Sheet

    Science.gov (United States)

    National Assembly of State Arts Agencies, 2011

    2011-01-01

    Supporting lifelong learning in the arts is a top priority for state arts agencies. By supporting arts education in the schools, state arts agencies foster young imaginations, address core academic standards, and promote the critical thinking and creativity skills essential to a 21st century work force. State arts agencies also support…

  16. State Arts Agency Fact Sheet: Support for Arts Education

    Science.gov (United States)

    Online Submission, 2015

    2015-01-01

    This national overview of state arts agency grants and services for arts education includes summary statistics and geographic distribution. The fact sheet uses data from Final Descriptive Reports of state arts agency grant-making activities submitted annually to the National Assembly of State Arts Agencies (NASAA) and the National Endowment for…

  17. Survey of the state of art in robotics and artificial intelligence, Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Thieme, G; Lux, P; Knappmann, R J; Schmidt, U

    1981-07-01

    This survey presents the state of the art in robotics and AI with emphasis on control and intelligence. It gives an introduction and summary description of robots and AI, identifies main application areas in space and benefits of the new technologies. Basic methods and concepts are illustrated. The state of the art, evolution trends and problem areas are described for industrial robots and space systems. Two reference missions are used to identify space opportunities. The potential application of existing know-how to space usage is identified. Recommendations for future research and development are given to overcome the problem areas. The survey comprises inventories of relevant publications, firms and institutions and know-how.

  18. State of the art in crystal oscillators - Present and future

    Science.gov (United States)

    Rosati, V. J.; Filler, R. L.; Schodowski, S. S.; Vig, J. R.

    It is pointed out that most military communication, navigation, surveillance and IFF systems which are currently under development require stable oscillators for frequency control and/or timing. Examples of such systems are the Single Channel Ground and Airborne Radio System (SINCGARS), MILSTAR, the Global Positioning System (GPS), the Combat Identification System (CIS), and several radar systems. In 1981, a survey and evaluation program was initiated with the aim to determine the state-of-the-art of both TCXOs (temperature compensated crystal oscillators) and OCXOs (oven controlled crystal oscillators). This program is continuing. The results obtained to date are considered because they can provide useful guidance to system users on the availability of stable oscillators.

  19. Contemporary Romanian Art in the United States1

    Directory of Open Access Journals (Sweden)

    Altman Dana

    2014-08-01

    Full Text Available The article discusses the recent international interest in contemporary Romanian art and its growth in market share, with a focus on the United States. The theme is followed thorough in numerous museum exhibitions, increased collector following, art fair presence, gallery representation and auction activity initially in Europe and the United States. The phenomenon is discussed both in the context of the larger international movement conducive to the contemporary art price bubble, and in that of the local socio-economic changes. My chief interest lies in the factors leading up to the entry of post 1989 Romanian art in the global arena as a manifestation of market forces in the field. The analysis follows its grass roots local emergence through non-profit institutions, individual artists, small publications, low budget galleries, as well as the lack of contribution (with few notable exceptions of state institutions, while pointing out the national context of increasing deregulation of social support systems resulting in lack of focus on cultural manifestations. The conclusion is that the recent ascent of contemporary Romanian art (and coincidentally, the award winning contemporary Romanian cinematography is a fortuitous convergence of various factors, among which, increased international mobility and sharing. At the same time, it is also the result of the evolution of various individual artists that pursued a form of art rooted in Romanian artistic tradition but with a focus on the symbolic figurative. The result is a personal semiotics of raising the mundane to extraordinary levels that reconfigured the anxiety of entering a new system into an unmistakable and lasting visual language.

  20. A state of the art on metallic fuel technology development

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Woan; Kang, Hee Young; Nam, Cheol; Kim, Jong Oh [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-12-31

    Since worldwide interest turned toward ceramic fuels before the full potential of metallic fuel could be achieved in the late 1960`s, the development of metallic fuels continued throughout the 1970`s at ANL`s experimental breeder reactor II (EBR-II) because EBR-II continued to be fueled with the metallic uranium-fissium alloy, U-5Fs. During this decade the performance limitations of metallic fuel were satisfactorily resolved resolved at EBR-II. The concept of the IFR developed at ANL since 1984. The technical feasibility had been demonstrated and the technology database had been established to support its practicality. One key features of the IFR is that the fuel is metallic, which brings pronounced benefits over oxide in improved inherent safety and lower processing costs. At the outset of the 1980`s, it appeared that metallic fuels are recognized as a professed viable option with regard to safety, integral fuel cycle, waste minimization and deployment economics. This paper reviews the key advances in the last score and summarizes the state-of the art on metallic fuel technology development. (author). 29 refs., 1 tab.

  1. The state-of-the-art of HSR in Europe.

    NARCIS (Netherlands)

    Hansen, J.

    2009-01-01

    In this section of the workshop we present an overview based on mapping the current state-of-the-art concerning various fields of health services research, addressing the different levels of analysis in HSR. (1) HSR at the level of health care systems, being national or sometimes regional entities,

  2. Safety I and C system platforms - State-of-the-art and long-term available - A contradiction in terms?

    International Nuclear Information System (INIS)

    Richter, Steffen; Martin, Michael

    2006-01-01

    Automation systems, particularly in the field of safety I and C, are subject to conflict between three challenges. Customers' requests for state-of-the-art technology, ever shorter innovation cycles in the electronics industry and computer business and the requirement for long-term spare parts supply demand thorough and sustainable concepts from the supply market. The TELEPERM XS digital safety I and C platform has been applied successfully since 1998 for the modernization of safety I and C systems in over 30 NPP units from different reactor suppliers as well as for new plant construction. The platform is subject to a forward-looking life cycle management program combining an evolutionary and future-oriented approach to platform development with measures for ensuring the long-term support of the installed base. Driven by ever shorter innovation cycles in the electronics and automation industry, the platform is continuously evolved with state-of-the-art technology and enhanced safety features. The continuous innovation process is combined with maximum compatibility of the I and C components that make up the TELEPERM XS system platform. This makes the system future-oriented and simultaneously assures long-term availability of replacement parts. In this way TELEPERM XS meets the customer requirements for up-to-date but proven technology suitable to ensure an operating life of safety I and C equipment spanning several decades. As a matter of course, the platform and component development adheres to the robust and proven architecture of TELEPERM XS, thereby limiting risks for equipment qualification and project licensing to a minimum. (authors)

  3. Safety I and C system platforms - State-of-the-art and long-term available - A contradiction in terms?

    Energy Technology Data Exchange (ETDEWEB)

    Richter, Steffen; Martin, Michael [Framatome ANP GmbH, P.O. Box 3220, Freyeslebenstrasse 1, D-91050 Erlangen (Germany)

    2006-07-01

    Automation systems, particularly in the field of safety I and C, are subject to conflict between three challenges. Customers' requests for state-of-the-art technology, ever shorter innovation cycles in the electronics industry and computer business and the requirement for long-term spare parts supply demand thorough and sustainable concepts from the supply market. The TELEPERM XS digital safety I and C platform has been applied successfully since 1998 for the modernization of safety I and C systems in over 30 NPP units from different reactor suppliers as well as for new plant construction. The platform is subject to a forward-looking life cycle management program combining an evolutionary and future-oriented approach to platform development with measures for ensuring the long-term support of the installed base. Driven by ever shorter innovation cycles in the electronics and automation industry, the platform is continuously evolved with state-of-the-art technology and enhanced safety features. The continuous innovation process is combined with maximum compatibility of the I and C components that make up the TELEPERM XS system platform. This makes the system future-oriented and simultaneously assures long-term availability of replacement parts. In this way TELEPERM XS meets the customer requirements for up-to-date but proven technology suitable to ensure an operating life of safety I and C equipment spanning several decades. As a matter of course, the platform and component development adheres to the robust and proven architecture of TELEPERM XS, thereby limiting risks for equipment qualification and project licensing to a minimum. (authors)

  4. State of the art and prospects of nuclear power development

    International Nuclear Information System (INIS)

    Egorov, Yu.V.; Glushenkova, S.Z.

    1984-01-01

    State of the art and prospects of nuclear power development abroad except the COMECON countries and Yugoslavia, are considered. Both average electric power of power units and load factor (LF) are shown to increase. Data on both the total generating capacity and nuclear power generation in certain countries are given. The number of commissioned NPPs in the USA decreases but terms of their construction and licensing are reduced, program of fast breeder reactor construction is being realized, prohibition of nuclear fuel reprocessing in cancelled. France came to the second place in the world as regards the operating NPPs. The nuclear power generation in Japan makes up 13% of the total generating capacity in the country. The LF of the Japan NPPs with BWR and PWR in 1982 made up 70.7 and 69.8%, respectively. A higher reliability of NPPs, decrease in the time for periodical inspections and prolongation of the operating cycle have promoted an increase in the LF

  5. State of the States 2016: Arts Education State Policy Summary

    Science.gov (United States)

    Aragon, Stephanie

    2016-01-01

    The "State of the States 2016" summarizes state policies for arts education identified in statute or administrative code for all 50 states and the District of Columbia. Information is based on a comprehensive search of state education statute and codes on each state's relevant websites. Complete results from this review are available in…

  6. Big-hole drilling - the state of the art

    International Nuclear Information System (INIS)

    Lackey, M.D.

    1983-01-01

    The art of big-hole drilling has been in a continual state of evolution at the Nevada Test Site since the start of underground testing in 1961. Emplacement holes for nuclear devices are still being drilled by the rotary-drilling process, but almost all the hardware and systems have undergone many changes during the intervening years. The current design of bits, cutters, and other big-hole-drilling hardware results from contributions of manufacturers and Test Site personnel. The dual-string, air-lift, reverse-circulation system was developed at the Test Site. Necessity was really the Mother of this invention, but this circulation system is worthy of consideration under almost any condition. Drill rigs for big-hole drilling are usually adaptations of large oil-well drill rigs with minor modifications required to handle the big bits and drilling assemblies. Steel remains the favorite shaft lining material, but a lot of thought is being given to concrete linings, especially precast concrete

  7. Analysis of Respiratory Sounds: State of the Art

    Directory of Open Access Journals (Sweden)

    Sandra Reichert

    2008-01-01

    Full Text Available Objective This paper describes state of the art, scientific publications and ongoing research related to the methods of analysis of respiratory sounds. Methods and material Review of the current medical and technological literature using Pubmed and personal experience. Results The study includes a description of the various techniques that are being used to collect auscultation sounds, a physical description of known pathologic sounds for which automatic detection tools were developed. Modern tools are based on artificial intelligence and on technics such as artificial neural networks, fuzzy systems, and genetic algorithms… Conclusion The next step will consist in finding new markers so as to increase the efficiency of decision aid algorithms and tools.

  8. Process development for the manufacturing of state-of-the-art spacer grids

    Energy Technology Data Exchange (ETDEWEB)

    Schebitz, Florian; Dietrich, Matthias [Advanced Nuclear Fuels GmbH, Karlstein (Germany)

    2013-07-01

    At the beginning it was questioned if 'time to market' is really important for the nuclear industry. The clear answer is YES. Even if the development times might be longer compared to projects in other industries it is still beneficial to use concurrent engineering. In the world wide network of manufacturing sites, Advanced Nuclear Fuels GmbH in Karlstein is quite often involved when the development of new processes is necessary. As ANF Karlstein is delivering products around the world the experience with different customer requirements supports an optimized solution in order to fulfill these principle requirements and to deliver state-of-the-art products like spacer grids. Continues feedback from process development already improves the first prototypes. In the meantime ANF Karlstein manufactured the components for both new fuel assembly designs which are introduced as a first set of Lead Fuel Assemblies. For the manufacturing of the next sets of spacer grids (for tests and next series of Lead Fuel Assemblies) the described processes will be used and further improved, so that an industrialized solution is available. (orig.)

  9. Electric automation history and state of the art; Historia da automacao eletrica e estado da arte

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, M.F. [Itaipu Binacional, Foz do Iguacu, PR (Brazil). Div. de Engenharia Eletronica e Sistemas de Controle], E-mail: mendes@ieee.org; Jardini, J.A. [Universidade de Sao Paulo (PEA/EP/USP), SP (Brazil). Escola Politecnica. Dept. de Engenharia de Energia e Automacao Eletricas], E-mail: jardini@pea.usp.br

    2009-07-01

    The article summarizes the history of electric systems automation, used in hydroelectric power plants, since the rise to the present day. Technologies are presented employed at various times, developments, the difference and the reasons for evolution. The emphasis is on today's modern systems technology, covering: communication, standardization, hardware, software, architecture, maintenance, operation and challenges. This work pretend to give subsidies for the design and implementation of automation systems electricity using state of the art. The scope are the new plants as well as those being modernized. Knowledge of history is important to investigate, to plan and evaluate the costs and benefits of automation systems for new electric plants and those that are undergoing processes technological upgrading.

  10. Nuclear and radiation techniques - state of art and development trends; Techniki jadrowe i radiacyjne - stan obecny oraz kierunki rozwoju

    Energy Technology Data Exchange (ETDEWEB)

    Chmielewski, A.G. [Institute of Nuclear Chemistry and Technology, Warsaw (Poland)

    1995-12-31

    The state of art and development trends of nuclear and radiation techniques in Poland and worldwide have been presented. Among them the radiometric gages, radiation technologies, radiotracer methods and measuring systems for pipeline and vessels, brightness control have been described and their applications in industry, agriculture, health and environment protection have been shown and discussed. 35 refs, 1 fig.

  11. State of the art

    International Nuclear Information System (INIS)

    Lederman, L.M.

    1983-01-01

    There is a large body of experience in high luminosity data taking in fixed target research. We try to consider a wide variety of high rate experiments which were limited by the detector (not by available beam) to a preset number of collisions per second. We then attempt to translate these state-of-the-art experiments to effective collider experiments. To this end, we extend the chosen detector to a comparison 4π collider detector operating near 1 TeV. There are several issues: (1) effective solid angle must be translated to approx. = 4π, (2) environments may be quite different, e.g., beam dump near fixed target or beam halo muons vs. collider backgrounds, (3) the multiplicity varies over the experiments selected and (4) we have to treat open vs closed geometries. The large variety of experiments selected is designed to average over the causes for detector limitation. Finally we chose detectors which have produced physics in order to gauge the state of the art

  12. Grate monitoring systems, state of the art; Metoder foer rosteroevervakning, dagslaegesbestaemning

    Energy Technology Data Exchange (ETDEWEB)

    Blom, Elisabet [Aaf Processdesign AB, Linkoeping (Sweden)

    2001-01-01

    During a number of years research and development projects have been made to present methods of monitoring the grate in a grate fired boiler. The monitoring is interesting in order to be able to increase efficiency, increase burn-out of ash, improve the status of emissions, improve transportation of ash and fuel through the furnace, reduce costs for operation and maintenance, handle greater loads etc. Improvement of the combustion has been concentrated to the development of the gas phase combustion. In the past few years the computer development has progressed rapidly and the use of optical monitoring methods have been made possible for monitoring grates. To analyse state of the art of optical grate monitoring systems three different methods have been used, literature search, inquiry where plant owners were asked if they have used grate monitoring systems and if so what experiences they have, and interviews with scientists and users. The inquiry investigation was made during spring 2000 and supplemented with a few known users of grate monitoring systems in august 2000. The interviews were made during august 2000. The methods which have been examined are: Video monitoring; Computer vision; IR-pyrometry; IR-camera technology; Laser measuring methods; Acoustic pyrometry. The survey showed that video monitoring is useful to monitor the fuel bed and an aid to the operators. A good cooling and cleansing system is essential to make the system reliable. If the system is aided with computer vision the computer will show numbers which can be used in the control system. These have been tried at a couple of sites but the system is still being developed and no sites uses this function fully automated. Infrared measurements have been tried in number of research projects. The IR-pyrometer technique is good for measuring temperature but the reliability is too low for some of the users. IR-cameras are used in several waste incineration plants to control the combustion. The systems

  13. Magnetic resonance imaging of the cardiovascular system: present state of the art and future potential

    International Nuclear Information System (INIS)

    Jacobson, H.G.

    1988-01-01

    State-of-the-art magnetic resonance imaging (MRI) generates high-resolution images of the cardiovascular system. Conventional MRI techniques provide images in six to ten minutes per tomographic slice. New strategies have substantially improved the speed of imaging. The technology is relatively expensive, and its cost-effectiveness remains to be defined in relation to other effective, less expensive, and noninvasive technologies, such as echocardiography and nuclear medicine. The ultimate role of MRI will depend on several factors, including the development of specific applications such as (1) noninvasive angiography, especially of the coronary arteries;(2) noninvasive, high-resolution assessment of regional myocardial blood flow distribution (e.g., using paramagnetic contrast agents); (3) characterization of myocardial diseases using proton-relaxation property changes; and (4) evaluation of in vivo myocardial biochemistry. The three-dimensional imaging capability and the ability to image cardiovascular structures without contrast material give MRI a potential advantage over existing noninvasive diagnostic imaging techniques. This report analyzes current applications of MRI to the cardiovascular system and speculates on their future

  14. Primary system fission product release and transport. A state-of-the-art report to the committee on the safety of nuclear installations

    International Nuclear Information System (INIS)

    Wright, A.L.

    1994-06-01

    This report presents a summary of the status of research activities associated with fission product behavior (release and transport) under severe accident conditions within the primary systems of water-moderated and water-cooled nuclear reactors. For each of the areas of fission product release and fission product transport, the report summarizes relevant information on important phenomena, major experiments performed, relevant computer models and codes, comparisons of computer code calculations with experimental results, and general conclusions on the overall state of the art. Finally, the report provides an assessment of the overall importance and knowledge of primary system release and transport phenomena and presents major conclusions on the state of the art

  15. Primary system fission product release and transport: A state-of-the-art report to the committee on the safety of nuclear installations

    International Nuclear Information System (INIS)

    Wright, A.L.

    1994-06-01

    This report presents a summary of the status of research activities associated with fission product behavior (release and transport) under severe accident conditions within the primary systems of water-moderated and water-cooled nuclear reactors. For each of the areas of fission product release and fission product transport, the report summarizes relevant information on important phenomena, major experiments performed, relevant computer models and codes, comparisons of computer code calculations with experimental results, and general conclusions on the overall state of the art. Finally, the report provides an assessment of the overall importance and knowledge of primary system release and transport phenomena and presents major conclusions on the state of the art

  16. Primary system fission product release and transport: A state-of-the-art report to the committee on the safety of nuclear installations

    Energy Technology Data Exchange (ETDEWEB)

    Wright, A.L. [Oak Ridge National Lab., TN (United States)

    1994-06-01

    This report presents a summary of the status of research activities associated with fission product behavior (release and transport) under severe accident conditions within the primary systems of water-moderated and water-cooled nuclear reactors. For each of the areas of fission product release and fission product transport, the report summarizes relevant information on important phenomena, major experiments performed, relevant computer models and codes, comparisons of computer code calculations with experimental results, and general conclusions on the overall state of the art. Finally, the report provides an assessment of the overall importance and knowledge of primary system release and transport phenomena and presents major conclusions on the state of the art.

  17. State of the art in semiconductor detectors

    International Nuclear Information System (INIS)

    Rehak, P.; Gatti, E.

    1990-01-01

    The state of the art in semiconductor detectors for elementary particle physics and X-ray astronomy is briefly reviewed. Semiconductor detectors are divided into two groups; i) classical semiconductor diode detectors and ii) semiconductor memory detectors. Principles of signal formation for both groups of detectors are described and their performance is compared. New developments of silicon detectors are reported here. (orig.)

  18. State of the art in semiconductor detectors

    International Nuclear Information System (INIS)

    Rehak, P.; Gatti, E.

    1989-01-01

    The state of the art in semiconductor detectors for elementary particle physics and x-ray astronomy is briefly reviewed. Semiconductor detectors are divided into two groups; classical semiconductor diode detectors; and semiconductor memory detectors. Principles of signal formation for both groups of detectors are described and their performance is compared. New developments of silicon detectors are reported here. 13 refs., 8 figs

  19. Simulation of pollutants transfer in soils - State-of-the-art. State-of-the-art of the simulation of pollutants transfer in soils - Final report

    International Nuclear Information System (INIS)

    Bourgois, J.; Vaillant, Herve; Moszkowicz, P.; Alimi Ichola, Ibrahim; Foret, Suzanne

    1997-02-01

    Industrial companies use and produce numerous substances which can induce a pollution of our environment and especially of soil and groundwater. Thus, it's necessary to estimate the risk of an environmental impact from an accidental or chronic, real or potential pollution. Modelling, which allow the simulation of pollutant migration, can be used as a decision support system, either for the pollution control and prevention of the resource, or for the monitoring of the remediation of polluted sites. In the first part of this study, we established a state of the art on modelling of pollutant migration in soils. In the second part, we focused on the main simulation tools currently available on the market, and on the main agencies or laboratories working on this subject, especially in France. At the end of this study, we drew some conclusions concerning modelling of pollutant migration in soils and the main points which will form the subject of further studies: - sensitivity analysis of model to input parameters and ranking of the main parameters, - achievement of a database on the state of the art of the results on modelling realized on case studies, - development of a mobility indicator of pollutant in soil, - application field and relevance of the models. (authors)

  20. State of the art metrics for aspect oriented programming

    Science.gov (United States)

    Ghareb, Mazen Ismaeel; Allen, Gary

    2018-04-01

    The quality evaluation of software, e.g., defect measurement, gains significance with higher use of software applications. Metric measurements are considered as the primary indicator of imperfection prediction and software maintenance in various empirical studies of software products. However, there is no agreement on which metrics are compelling quality indicators for novel development approaches such as Aspect Oriented Programming (AOP). AOP intends to enhance programming quality, by providing new and novel constructs for the development of systems, for example, point cuts, advice and inter-type relationships. Hence, it is not evident if quality pointers for AOP can be derived from direct expansions of traditional OO measurements. Then again, investigations of AOP do regularly depend on established coupling measurements. Notwithstanding the late reception of AOP in empirical studies, coupling measurements have been adopted as useful markers of flaw inclination in this context. In this paper we will investigate the state of the art metrics for measurement of Aspect Oriented systems development.

  1. Computer-aided detection systems to improve lung cancer early diagnosis: state-of-the-art and challenges

    International Nuclear Information System (INIS)

    Traverso, A; Lopez Torres, E; Cerello, P; Fantacci, M E

    2017-01-01

    Lung cancer is one of the most lethal types of cancer, because its early diagnosis is not good enough. In fact, the detection of pulmonary nodule, potential lung cancers, in Computed Tomography scans is a very challenging and time-consuming task for radiologists. To support radiologists, researchers have developed Computer-Aided Diagnosis (CAD) systems for the automated detection of pulmonary nodules in chest Computed Tomography scans. Despite the high level of technological developments and the proved benefits on the overall detection performance, the usage of Computer-Aided Diagnosis in clinical practice is far from being a common procedure. In this paper we investigate the causes underlying this discrepancy and present a solution to tackle it: the M5L WEB- and Cloud-based on-demand Computer-Aided Diagnosis. In addition, we prove how the combination of traditional imaging processing techniques with state-of-art advanced classification algorithms allows to build a system whose performance could be much larger than any Computer-Aided Diagnosis developed so far. This outcome opens the possibility to use the CAD as clinical decision support for radiologists. (paper)

  2. Computer-aided detection systems to improve lung cancer early diagnosis: state-of-the-art and challenges

    Science.gov (United States)

    Traverso, A.; Lopez Torres, E.; Fantacci, M. E.; Cerello, P.

    2017-05-01

    Lung cancer is one of the most lethal types of cancer, because its early diagnosis is not good enough. In fact, the detection of pulmonary nodule, potential lung cancers, in Computed Tomography scans is a very challenging and time-consuming task for radiologists. To support radiologists, researchers have developed Computer-Aided Diagnosis (CAD) systems for the automated detection of pulmonary nodules in chest Computed Tomography scans. Despite the high level of technological developments and the proved benefits on the overall detection performance, the usage of Computer-Aided Diagnosis in clinical practice is far from being a common procedure. In this paper we investigate the causes underlying this discrepancy and present a solution to tackle it: the M5L WEB- and Cloud-based on-demand Computer-Aided Diagnosis. In addition, we prove how the combination of traditional imaging processing techniques with state-of-art advanced classification algorithms allows to build a system whose performance could be much larger than any Computer-Aided Diagnosis developed so far. This outcome opens the possibility to use the CAD as clinical decision support for radiologists.

  3. u-Healthcare system: state-of-the-art review and challenges.

    Science.gov (United States)

    Touati, Farid; Tabish, Rohan

    2013-06-01

    With the increase of an ageing population and chronic diseases, society becomes more health conscious and patients become "health consumers" looking for better health management. People's perception is shifting towards patient-centered, rather than the classical, hospital-centered health services which has been propelling the evolution of telemedicine research from the classic e-Health to m-Health and now is to ubiquitous healthcare (u-Health). It is expected that mobile & ubiquitous Telemedicine, integrated with Wireless Body Area Network (WBAN), have a great potential in fostering the provision of next-generation u-Health. Despite the recent efforts and achievements, current u-Health proposed solutions still suffer from shortcomings hampering their adoption today. This paper presents a comprehensive review of up-to-date requirements in hardware, communication, and computing for next-generation u-Health systems. It compares new technological and technical trends and discusses how they address expected u-Health requirements. A thorough survey on various worldwide recent system implementations is presented in an attempt to identify shortcomings in state-of-the art solutions. In particular, challenges in WBAN and ubiquitous computing were emphasized. The purpose of this survey is not only to help beginners with a holistic approach toward understanding u-Health systems but also present to researchers new technological trends and design challenges they have to cope with, while designing such systems.

  4. A state-the-art report on the development of the piezoelectric accelerometer sensor

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jee Yun; Oh, Suk Jin; Kim, Kyung Hoh; Kim, Sun Jae; Kang, Dae Kab [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-12-01

    A state-of-the art surveys on the application and the manufacturing technology of a piezoelectric accelerometer sensor. An accelerometer sensor is applied to the monitoring of acoustic leak, reactor coolant pump vibration and loose parts in the reactor, and the measurement of vibration and stress of large equipments such as pump, tubes, etc.. The performance of an accelerometer consisted of piezoelectric ceramic, mass, base, case and cable is depend on the characteristics of each component and the assembling method. Sensitivity, linearity and dynamic range, transverse sensitivity, phase response, transient temperature response, frequency response, base strain sensitivity, magnetic sensitivity, acoustic sensitivity, humidity effect and radiation effect must be measured and evaluated for conforming quality of the developed accelerometer sensor. 35 figs., 29 tabs., 38 refs. (Author).

  5. A state-the-art report on the development of the piezoelectric accelerometer sensor

    International Nuclear Information System (INIS)

    Park, Jee Yun; Oh, Suk Jin; Kim, Kyung Hoh; Kim, Sun Jae; Kang, Dae Kab

    1994-12-01

    A state-of-the art surveys on the application and the manufacturing technology of a piezoelectric accelerometer sensor. An accelerometer sensor is applied to the monitoring of acoustic leak, reactor coolant pump vibration and loose parts in the reactor, and the measurement of vibration and stress of large equipments such as pump, tubes, etc.. The performance of an accelerometer consisted of piezoelectric ceramic, mass, base, case and cable is depend on the characteristics of each component and the assembling method. Sensitivity, linearity and dynamic range, transverse sensitivity, phase response, transient temperature response, frequency response, base strain sensitivity, magnetic sensitivity, acoustic sensitivity, humidity effect and radiation effect must be measured and evaluated for conforming quality of the developed accelerometer sensor. 35 figs., 29 tabs., 38 refs. (Author)

  6. The state-of-the-art and prospects for the development of rechargeable lithium batteries

    International Nuclear Information System (INIS)

    Skundin, Aleksandr M; Efimov, Oleg N; Yarmolenko, Ol'ga V

    2002-01-01

    The state-of-the-art of investigations into the development and perfection of the most promising class of chemical power sources, namely, rechargeable lithium batteries, is considered. The main problems of designing the batteries with a metallic lithium electrode are formulated and the use of alternative negative electrodes is substantiated. Special attention is paid to the studies dealing with the principles of the performance of lithium-ion batteries as well as the key directions for the perfection of these devices, which mainly concern the elaboration of new materials for lithium-ion batteries. A separate section is devoted to the consideration of polymeric electrolytes for lithium and lithium-ion batteries. The bibliography includes 390 references.

  7. State-of-the-art research: optimal investment in market-based electric power systems

    Energy Technology Data Exchange (ETDEWEB)

    Hope, Einar; Skjeret, Frode

    2008-04-15

    The purpose of this state-of-the-art research paper is to surveying the literature on investment in market based electric power systems as a background for identifying and discussing some important issues in the optimal design and operation of such systems. A fundamental distinction has to be made between investment in the competitive part of the power system (generation and trading) on the one hand and the natural monopoly part (network infrastructure) on the other. The paper starts with a listing and discussion on market characteristics and properties of electric power and goes on to discussing performance criteria and potential sources of market failure for optimal electric power investment. After the literature survey there is a discussion of conditions under which optimal investment may occur. (author). 78 refs., figs

  8. Development of a security system for assisted reproductive technology (ART).

    Science.gov (United States)

    Hur, Yong Soo; Ryu, Eun Kyung; Park, Sung Jin; Yoon, Jeong; Yoon, San Hyun; Yang, Gi Deok; Hur, Chang Young; Lee, Won Don; Lim, Jin Ho

    2015-01-01

    In the field of assisted reproductive technology (ART), medical accidents can result in serious legal and social consequences. This study was conducted to develop a security system (called IVF-guardian; IG) that could prevent mismatching or mix-ups in ART. A software program was developed in collaboration with outside computer programmers. A quick response (QR) code was used to identify the patients, gametes and embryos in a format that was printed on a label. There was a possibility that embryo development could be affected by volatile organic components (VOC) in the printing material and adhesive material in the label paper. Further, LED light was used as the light source to recognize the QR code. Using mouse embryos, the effects of the label paper and LED light were examined. The stability of IG was assessed when applied in clinical practice after developing the system. A total of 104 cycles formed the study group, and 82 cycles (from patients who did not want to use IG because of safety concerns and lack of confidence in the security system) to which IG was not applied comprised the control group. Many of the label paper samples were toxic to mouse embryo development. We selected a particular label paper (P touch label) that did not affect mouse embryo development. The LED lights were non-toxic to the development of the mouse embryos under any experimental conditions. There were no differences in the clinical pregnancy rates between the IG-applied group and the control group (40/104 = 38.5 % and 30/82 = 36.6 %, respectively). The application of IG in clinical practice did not affect human embryo development or clinical outcomes. The use of IG reduces the misspelling of patient names. Using IG, there was a disadvantage in that each treatment step became more complicated, but the medical staff improved and became sufficiently confident in ART to offset this disadvantage. Patients who received treatment using the IG system also went through a somewhat

  9. Nickel-base superalloy powder metallurgy: state-of-the-art

    International Nuclear Information System (INIS)

    Allen, M.M.; Athey, R.L.; Moore, J.B.

    1975-01-01

    Development of powder metallurgical methods for fabrication of Ni-base superalloy turbine engine disks is reviewed. Background studies are summarized and current state-of-art is discussed for the F100 jet engine, advanced applications, and forging processes

  10. Chernobyl - state of the art

    International Nuclear Information System (INIS)

    Souza, Daiane C.B. de; Vicente, Roberto; Rostelato, Maria Elisa C.M.; Borges, Jessica F.; Tiezzi, Rodrigo; Peleias Junior, Fernando S.; Souza, Carla D.; Rodrigues, Bruna T.; Benega, Marcos A.G.; Souza, Anderson S. de; Silva, Thais H. da

    2014-01-01

    This article aims to analyze what has been done so far in relation to damage caused by the accident and the state of art in Chernobyl, as well as the impact on radiation protection applied safety nuclear power plants. In the first part of the work a data survey was done through a bibliographic review and the in the second part data was collected during a visit, in June 2013 at the crash site, when was observed dose values in the affected areas and the works of repairs that have been made in the sarcophagus and surroundings as well as in official reports available through active international bodies. The main results indicate significant improvements in radiation protection systems

  11. State of the art and the future fuel portfolio of fluidized bed combustion systems; Status und kuenftiges Brennstoffportfolio bei Wirbelschichtfeuerungen

    Energy Technology Data Exchange (ETDEWEB)

    Szentannai, Pal; Friebert, Arpad; Winter, Franz [Technische Univ. Wien (Austria). Inst. fuer Verfahrens-, Umwelttechnik und technische Biowissenschaften

    2008-07-01

    Coal, biomass and substitute fuels energetically can be used efficiently and with low pollution in fluidized bed plants. In comparison to biomass there are significant differences between the circulating and stationary fluidized bed technology. The stationary fluidised bed is fed predominantly with biomasses and residual substances. Coal usually is the basis fuel in the circulating fluidised bed. Biomass and residual substances frequently are course-fired. The state of the art is the employment of a broad fuel mixture in small and large fluidized-bed combustion systems. Future developments present an increased use of sewage sludge, fluidized bed combustion systems with wood as a basis fuel, utilization of household waste and the gas production.

  12. Performance evaluation of a state-of-the-art solar air-heating system with auxiliary heat pump

    Science.gov (United States)

    1980-01-01

    The system in Solar House 2 consists of 57.9 sq. m. of Solaron Series 300 Collectors, 10.3 cu. m. of pebble bed storage, domestic water preheating capability and a Carrier air-to-air heat pump as an auxiliary heater. Although the control subsystem was specially constructed to facilitate experimental changes and data reduction, the balance of the solar system was assembled with off-the-shelf components. Since all components of the system are commercially available the system is considered to be a state of the art solar air-heating system. The system design is one that is recommended for residential and small office buildings.

  13. Methane Post-Processor Development to Increase Oxygen Recovery beyond State-of-the-Art Carbon Dioxide Reduction Technology

    Science.gov (United States)

    Abney, Morgan B.; Greenwood, Zachary; Miller, Lee A.; Alvarez, Giraldo; Iannantuono, Michelle; Jones, Kenny

    2013-01-01

    State-of-the-art life support carbon dioxide (CO2) reduction technology, based on the Sabatier reaction, is theoretically capable of 50% recovery of oxygen from metabolic CO2. This recovery is constrained by the limited availability of reactant hydrogen. Post-processing of the methane byproduct from the Sabatier reactor results in hydrogen recycle and a subsequent increase in oxygen recovery. For this purpose, a Methane Post-Processor Assembly containing three sub-systems has been developed and tested. The assembly includes a Methane Purification Assembly (MePA) to remove residual CO2 and water vapor from the Sabatier product stream, a Plasma Pyrolysis Assembly (PPA) to partially pyrolyze methane into hydrogen and acetylene, and an Acetylene Separation Assembly (ASepA) to purify the hydrogen product for recycle. The results of partially integrated testing of the sub-systems are reported

  14. Nuclear power plant decommissioning: state-of-the-art review

    International Nuclear Information System (INIS)

    Williams, D.H.

    1984-01-01

    A brief orientation to the state-of-the-art of nuclear power plant decommissioning discusses the related areas of experience, tools and techniques, and planning. There have been 68 nuclear reactor decommissionings to date, including 9 power plants, some of which were mothballed. The picture suggests that the term art may be misapplied since decommissioning is now more of a mature commercial industrial than a research and development endeavor. It also suggests that the nuclear industry has shown foresight by preparing for it before a crisis situation developed. Some of this has already influenced operators of coal power plants, especially where hazardous materials may be involved. 33 references, 1 table

  15. The Brazilian state-of-the-art of hydrolysis; Estado da arte da hidrolise no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Carioca, Jose Osvaldo Beserra; Paula, Haroldo Cesar Beserra de; Lal Arora, Harbans; Selvam, P.V. Pannir [Nucleo de Fontes Nao-Convencionais de Energia, Fortaleza, CE, (Brazil)

    1988-12-31

    This paper presents a study of the state-of-the-art of technologies developed for acid and enzymatic hydrolysis of lignin and cellulose materials in Brazil. The information collected leads us to conclude that Brazil has achieved a high level of technological development. However, the industrial projects for production of alcohol from cassava have not proved successful due mainly to lack of agricultural experience and its low productivity. (author) 26 refs., 13 figs., 2 tabs.

  16. Desiccant cooling: State-of-the-art assessment

    Energy Technology Data Exchange (ETDEWEB)

    Pesaran, A.A.; Penney, T.R.; Czanderna, A.W.

    1992-10-01

    The objectives of this document are to present an overview of the work accomplished to date on desiccant cooling to provide assessment of the state of the art of desiccant cooling technology in the field of desiccant material dehumidifier components, desiccant systems, and models. The report also discusses the factors that affect the widespread acceptance of desiccant cooling technology. This report is organized as follows. First, a basic description and historical overview of desiccant cooling technology is provided. Then, the recent research and development (R D) program history (focusing on DOE's funded efforts) is discussed. The status of the technology elements (materials, components, systems) is discussed in detail and a preliminary study on the energy impact of desiccant technology is presented. R D needs for advancing the technology in the market are identified. The National Renewable Energy Laboratory's unique desiccant test facilities and their typical outputs are described briefly. Finally, the results of a comprehensive literature search on desiccant cooling are presented in a bibliography. The bibliography contains approximately 900 citations on desiccant cooling.

  17. Desiccant cooling: State-of-the-art assessment

    Energy Technology Data Exchange (ETDEWEB)

    Pesaran, A.A.; Penney, T.R.; Czanderna, A.W.

    1992-10-01

    The objectives of this document are to present an overview of the work accomplished to date on desiccant cooling to provide assessment of the state of the art of desiccant cooling technology in the field of desiccant material dehumidifier components, desiccant systems, and models. The report also discusses the factors that affect the widespread acceptance of desiccant cooling technology. This report is organized as follows. First, a basic description and historical overview of desiccant cooling technology is provided. Then, the recent research and development (R&D) program history (focusing on DOE`s funded efforts) is discussed. The status of the technology elements (materials, components, systems) is discussed in detail and a preliminary study on the energy impact of desiccant technology is presented. R&D needs for advancing the technology in the market are identified. The National Renewable Energy Laboratory`s unique desiccant test facilities and their typical outputs are described briefly. Finally, the results of a comprehensive literature search on desiccant cooling are presented in a bibliography. The bibliography contains approximately 900 citations on desiccant cooling.

  18. State of the art on fault-tolerant real time distributed systems

    International Nuclear Information System (INIS)

    Levkov, V.

    1992-06-01

    The integration of new computerized functions in power plant, and especially nuclear power plant, control and instrumentation systems implies more and more stringent requirements as to communication system reliability. For if an item of equipment, or even a computer program, can be validated and qualified, no formal qualification procedure is presently imposed on communication networks. This is certainly due to the relative immaturity of these networks, but also to their complexity. It is for this reason that, in the context of preparation for the future PWR 2000 standardized nuclear plants, it would seem appropriate to take a look at fault-tolerant communication systems. Since C and I type applications (in the control room) are divided between several computers and are required to contend with extremely severe time constraints, EDF has undertaken investigation of fault-tolerant, real time distributed systems. This paper summarized the state of the art in the field as it appears from discussion with computer manufacturers, academics and research workers on related projects. The results obtained were then used to determine trends as to ''promising'' solutions. The paper concludes with recommended study programs for the PCC department of EDF/R and DD for the next few years. (author), 9 figs., 10 refs., 2 annexes

  19. Symposium Connects Government Problems with State of the Art Network Science Research

    Science.gov (United States)

    2015-10-16

    Symposium Connects Government Problems with State-of-the- Art Network Science Research By Rajmonda S. Caceres and Benjamin A. Miller Network...the US Gov- ernment, and match these with the state-of-the- art models and techniques developed in the network science research community. Since its... science has grown significantly in the last several years as a field at the intersec- tion of mathematics, computer science , social science , and engineering

  20. Nuclear Liability, State of the Art

    International Nuclear Information System (INIS)

    Reitsma, S. M. S.

    2010-01-01

    Over fifty years ago states started to introduce legislation protecting the public against the potential magnitude and peculiarity of risks arising from the nuclear energy production. They did so trough a specific liability and compensation regime. Whether legislation was based on national initiatives or, as more frequently, related to international nuclear liability conventions, it was based on a number of principles being applied universally. Furthermore, it at the same time strived for not preventing the development of the nuclear industry because of an unbearable liability. This paper aims at explaining the broad outline of the above legislation, its development since its early years, the state of the art as regards its modernisation as well as the (alleged) problems underlying the delay in its introduction in a number of countries. When dealing with those problems it will be inevitable to touch upon a number of insurance related matters, which, as an insurer I am happy to tell, will lead me to familiar territory.(author).

  1. Text Generation: The State of the Art and the Literature.

    Science.gov (United States)

    Mann, William C.; And Others

    This report comprises two documents which describe the state of the art of computer generation of natural language text. Both were prepared by a panel of individuals who are active in research on text generation. The first document assesses the techniques now available for use in systems design, covering all of the technical methods by which…

  2. State of the art: alumina ceramics for energy applications

    International Nuclear Information System (INIS)

    Hauth, W.E.; Stoddard, S.D.

    1978-01-01

    Prominent ceramic raw materials and products manufacturers were surveyed to determine the state of the art for alumina ceramic fabrication. This survey emphasized current capabilities and limitations for fabrication of large, high-density, high-purity, complex shapes. Some directions are suggested for future needs and development

  3. The Impact of ART on Live Birth Outcomes: Differing Experiences across Three States.

    Science.gov (United States)

    Luke, Sabrina; Sappenfield, William M; Kirby, Russell S; McKane, Patricia; Bernson, Dana; Zhang, Yujia; Chuong, Farah; Cohen, Bruce; Boulet, Sheree L; Kissin, Dmitry M

    2016-05-01

    Research has shown an association between assisted reproductive technology (ART) and adverse birth outcomes. We identified whether birth outcomes of ART-conceived pregnancies vary across states with different maternal characteristics, insurance coverage for ART services, and type of ART services provided. CDC's National ART Surveillance System data were linked to Massachusetts, Florida, and Michigan vital records from 2000 through 2006. Maternal characteristics in ART- and non-ART-conceived live births were compared between states using chi-square tests. We performed multivariable logistic regression analyses and calculated adjusted odds ratios (aOR) to assess associations between ART use and singleton preterm delivery (birth. ART use in Massachusetts was associated with significantly lower odds of twins as well as triplets and higher order births compared to Florida and Michigan (aOR 22.6 vs. 30.0 and 26.3, and aOR 37.6 vs. 92.8 and 99.2, respectively; Pinteraction order gestations per cycle was lower in Massachusetts, which may be due to the availability of insurance coverage for ART in Massachusetts. © 2016 John Wiley & Sons Ltd.

  4. The State-of-the-Art Report for the Knowledge Management System for the Radioactive Waste Depository

    International Nuclear Information System (INIS)

    Jeong, Jong Tae; Choi, Jong Won; Choi, Heui Joo; Cho, Dong Keun; Park, Chung Kyun; Cho, Young Chul; Lee, Sang Hun

    2011-09-01

    knowledge management system is necessary for the effective performance of disposal projects. This is a analysis report on the state-of-the-art for the survey of the domestic and foreign knowledge management system and application areas of the knowledge management system. This can be used in the suggestion of the plan for the establishment of the knowledge management system for the waste disposal projects

  5. The state of the art in static and dynamic games

    NARCIS (Netherlands)

    De Giovanni, P.

    2009-01-01

    Purpose - The purpose of this paper is to investigate the state of the art in static and dynamic games (or inter-firm relationships). This research area has changed significantly over the last 25 years through the development of phenomena such as the supply chain and the progressive overcoming of

  6. Sensors and Technologies in Spain: State-of-the-Art

    Directory of Open Access Journals (Sweden)

    Gonzalo Pajares

    2014-08-01

    Full Text Available The aim of this special issue was to provide a comprehensive view on the state-of-the-art sensor technology in Spain. Different problems cause the appearance and development of new sensor technologies and vice versa, the emergence of new sensors facilitates the solution of existing real problems. [...

  7. State-of-the-art mass spectrometer system for determination of uranium and plutonium isotopic distributions in process samples

    International Nuclear Information System (INIS)

    Polson, C.A.

    1983-01-01

    A Finnigan MAT 261 automated thermal ionization mass spectrometer system was purchased by the Savannah River Plant. The MAT 261 is a highly precise, fully automated instrument. Many features make this instrument the state-of-the-art technology in precision isotopic composition measurements. A unique feature of the MAT 261 is the ion detection system which permits measurement of the three uranium or plutonium masses simultaneously. All Faraday cup measuring channels are of the same design and each is equipped with a dedicated amplifier. Each amplifier is connected to a linear voltage/frequency measuring system for ion current integration. These outputs are fed into a Hewlett-Packard 9845T desk-top computer. The computer, and the Finnigan developed software package, control filament heating cycles, sample preconditioning, ion beam focusing, carrousel rotation, mass selection, and data collection and reduction. Precision, accuracy, and linearity were determined under normal laboratory conditions using a NBS uranium suite of standards. These results along with other development in setting up the instrument are presented

  8. Leadership and Fairness: The state of the art.

    OpenAIRE

    van Knippenberg, D.; de Cremer, D.; van Knippenberg, B.M.

    2007-01-01

    textabstractResearch in leadership effectiveness has paid less to the role of leader fairness than probably it should have. More recently, this has started to change. To capture this development, we review the empirical literature in leadership and fairness to define the field of leadership and fairness, to assess the state of the art, and to identify a research agenda for future efforts in the field. The review shows that leader distributive, procedural, and especially interactional fairness...

  9. The study of urban systems by indicators. State of the art and implementation problems

    International Nuclear Information System (INIS)

    Del Ciello, R.; Napoleoni, S.

    2001-01-01

    The purpose of this work is to define the state of the art about the problem of the indicators and their capability in reading and foreseeing the urban complexity. Therefore, the theoretical elaborations and the suggestions developed in the report try to convert the different contributions in the Italian and international literature in a frame-work, focusing on those arguments which assume a key role in the study of the urban areas: (a) the problematic definition of the administrative, physics and functional boarders of the cities; (b) the selection of the indicators that describe the urban areas; (c) the description and quality of life and of environment quality in the cities; (d) the sustainability in urban areas [it

  10. Chernobyl - state of the art; Chernobyl - o estado da arte

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Daiane C.B. de; Vicente, Roberto; Rostelato, Maria Elisa C.M.; Borges, Jessica F.; Tiezzi, Rodrigo; Peleias Junior, Fernando S.; Souza, Carla D.; Rodrigues, Bruna T.; Benega, Marcos A.G.; Souza, Anderson S. de; Silva, Thais H. da, E-mail: dcsouza@ipen.br, E-mail: rvicente@ipen.br, E-mail: elisaros@ipen.br, E-mail: rtiezzi@ipen.br, E-mail: carladdsouza@yahoo.com.br, E-mail: marcosagbenega@ipen.br, E-mail: bteigarodrigues@gmail.com, E-mail: thaishunk@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2014-07-01

    This article aims to analyze what has been done so far in relation to damage caused by the accident and the state of art in Chernobyl, as well as the impact on radiation protection applied safety nuclear power plants. In the first part of the work a data survey was done through a bibliographic review and the in the second part data was collected during a visit, in June 2013 at the crash site, when was observed dose values in the affected areas and the works of repairs that have been made in the sarcophagus and surroundings as well as in official reports available through active international bodies. The main results indicate significant improvements in radiation protection systems.

  11. Volterra-series-based nonlinear system modeling and its engineering applications: A state-of-the-art review

    Science.gov (United States)

    Cheng, C. M.; Peng, Z. K.; Zhang, W. M.; Meng, G.

    2017-03-01

    Nonlinear problems have drawn great interest and extensive attention from engineers, physicists and mathematicians and many other scientists because most real systems are inherently nonlinear in nature. To model and analyze nonlinear systems, many mathematical theories and methods have been developed, including Volterra series. In this paper, the basic definition of the Volterra series is recapitulated, together with some frequency domain concepts which are derived from the Volterra series, including the general frequency response function (GFRF), the nonlinear output frequency response function (NOFRF), output frequency response function (OFRF) and associated frequency response function (AFRF). The relationship between the Volterra series and other nonlinear system models and nonlinear problem solving methods are discussed, including the Taylor series, Wiener series, NARMAX model, Hammerstein model, Wiener model, Wiener-Hammerstein model, harmonic balance method, perturbation method and Adomian decomposition. The challenging problems and their state of arts in the series convergence study and the kernel identification study are comprehensively introduced. In addition, a detailed review is then given on the applications of Volterra series in mechanical engineering, aeroelasticity problem, control engineering, electronic and electrical engineering.

  12. The Arts and Talent Development.

    Science.gov (United States)

    Seeley, Ken

    1996-01-01

    Discusses the role of creative arts in developing talent among gifted students. Talent development strategies using the arts are identified. Also describes ways that teachers can support collaboration among the arts and that parents can advocate and foster arts programs. (CR)

  13. State-of-the-art inventory

    NARCIS (Netherlands)

    Verhagen, H.J.; Van Gerven, K.A.J.; Akkerman, G.J.

    2005-01-01

    The present report provides a state-of-the-art inventory of relevant information and technical concepts for the ComCoast project, being the first phase of the research stages of Work Package 3 (WP3). This project was assigned to Royal Haskoning by CUR. The information scan was set-up in a systematic

  14. Efficient thermal desalination technologies with renewable energy systems: A state-of-the-art review

    Energy Technology Data Exchange (ETDEWEB)

    Esfahani, Iman Janghorban; Rashidi, Jouan; Ifaei, Pouya; Yoo, ChangKyoo [Center for Environmental Studies, Kyung Hee University, Yongin (Korea, Republic of)

    2016-02-15

    Due to the current fossil fuel crisis and associated adverse environmental impacts, renewable energy sources (RES) have drawn interest as alternatives to fossil fuels for powering water desalination systems. Over the last few decades the utility of renewable energy sources such as solar, geothermal, and wind to run desalination processes has been explored. However, the expansion of these technologies to larger scales is hampered by techno-economic and thermo-economic challenges. This paper reviews the state-of-the-art in the field of renewable energy-powered thermal desalination systems (RE-PTD) to compare their productivity and efficiency through thermodynamic, economic, and environmental analyses. We performed a comparative study using published data to classify RE-PTD systems technologies on the basis of the energy collection systems that they use. Among RE-PTD systems, solar energy powered-thermal desalination systems demonstrate high thermo-environ-economic efficiency to produce fresh water to meet various scales of demand.

  15. Efficient thermal desalination technologies with renewable energy systems: A state-of-the-art review

    International Nuclear Information System (INIS)

    Esfahani, Iman Janghorban; Rashidi, Jouan; Ifaei, Pouya; Yoo, ChangKyoo

    2016-01-01

    Due to the current fossil fuel crisis and associated adverse environmental impacts, renewable energy sources (RES) have drawn interest as alternatives to fossil fuels for powering water desalination systems. Over the last few decades the utility of renewable energy sources such as solar, geothermal, and wind to run desalination processes has been explored. However, the expansion of these technologies to larger scales is hampered by techno-economic and thermo-economic challenges. This paper reviews the state-of-the-art in the field of renewable energy-powered thermal desalination systems (RE-PTD) to compare their productivity and efficiency through thermodynamic, economic, and environmental analyses. We performed a comparative study using published data to classify RE-PTD systems technologies on the basis of the energy collection systems that they use. Among RE-PTD systems, solar energy powered-thermal desalination systems demonstrate high thermo-environ-economic efficiency to produce fresh water to meet various scales of demand.

  16. Two-dimensional systems from introduction to state of the art

    CERN Document Server

    Benzaouia, Abdellah; Tadeo, Fernando

    2016-01-01

    A solution permitting the stabilization of 2-dimensional (2-D) continuous-time saturated system under state feedback control is presented in this book. The problems of delay and saturation are treated at the same time. The authors obtain novel results on continuous 2-D systems using the unidirectional Lyapunov function. The control synthesis and the saturation and delay conditions are presented as linear matrix inequalities. Illustrative examples are worked through to show the effectiveness of the approach and many comparisons are made with existing results. The second half of the book moves on to consider robust stabilization and filtering of 2-D systems with particular consideration being given to 2-D fuzzy systems. Solutions for the filter-design problems are demonstrated by computer simulation. The text builds up to the development of state feedback control for 2-D Takagi–Sugeno systems with stochastic perturbation. Conservatism is reduced by using slack matrices and the coupling between the Lyapunov ma...

  17. Greenhouse mechanization: State of the art and future perspective

    NARCIS (Netherlands)

    Henten, van E.

    2006-01-01

    This paper reviews the state of the art and future perspective of greenhouse mechanization. Driving forces for mechanization are identified. Dutch greenhouse crop production is used as an example. Analysis of a generic crop production process combined with a review of the state of the art in

  18. EVALUATION OF THE STATE-OF-THE-ART CONTAMINATED SEDIMENT TRANSPORT AND FATE MODELING SYSTEM

    Science.gov (United States)

    Modeling approaches for evaluating the transport and fate of sediment and associated contaminants are briefly reviewed. The main emphasis is on: 1) the application of EFDC (Environmental Fluid Dynamics Code), the state-of-the-art contaminated sediment transport and fate public do...

  19. Pathway — Using a State-of-the-Art Digital Video Database for Research and Development in Teacher Education

    Science.gov (United States)

    Adrian, Brian; Zollman, Dean; Stevens, Scott

    2006-02-01

    To demonstrate how state-of-the-art video databases can address issues related to the lack of preparation of many physics teachers, we have created the prototype Physics Teaching Web Advisory (Pathway). Pathway's Synthetic Interviews and related video materials are beginning to provide pre-service and out-of-field in-service teachers with much-needed professional development and well-prepared teachers with new perspectives on teaching physics. The prototype was limited to a demonstration of the systems. Now, with an additional grant we will extend the system and conduct research and evaluation on its effectiveness. This project will provide virtual expert help on issues of pedagogy and content. In particular, the system will convey, by example and explanation, contemporary ideas about the teaching of physics and applications of physics education research. The research effort will focus on the value of contemporary technology to address the continuing education of teachers who are teaching in a field in which they have not been trained.

  20. Heteronomy in the arts field: state funding and British arts organizations.

    Science.gov (United States)

    Alexander, Victoria D

    2018-03-01

    For Bourdieu, the field of cultural production is comprised of an autonomous and a heteronomous sector. A heteronomous sector is one that is interpenetrated by the commercial field. I discuss an arena that, until recently, was part of the relatively autonomous sector in the field of cultural production - the supported arts sector in the United Kingdom - and argue that it became more heteronomous, due to the penetration by the state. Heteronomy due to the commercial field is present but secondary to, and driven by, the actions of the state. Political parties' attempts to diffuse and legitimate a particular economic ideology have led to state demands that arts institutions adopt neoliberal business practices in exchange for funding. Government giving to the arts, previously at arm's length, proved to be a Faustian bargain that demanded significant repayment in the form of lost autonomy. Coercive pressures from the state, enacted over time, show how the domination of one field over another can occur, even when the domination is resisted. © London School of Economics and Political Science 2017.

  1. State of the art undersøgelse

    DEFF Research Database (Denmark)

    Nielsen, Nils

    1998-01-01

    Dette skrift omhandler nogle af de erfaringer der til dato er opnået i forbindelse med standby projektets udførelse. Hovedtemaet er en “State of the art undersøgelse” der omhandler standby-spændingsforsyninger, samt komponenter der kan anvendes til konstruktion af dem......Dette skrift omhandler nogle af de erfaringer der til dato er opnået i forbindelse med standby projektets udførelse. Hovedtemaet er en “State of the art undersøgelse” der omhandler standby-spændingsforsyninger, samt komponenter der kan anvendes til konstruktion af dem...

  2. An Assessment of the State of the Art of Curriculum Materials and a Status Assessment of Training Programs for Robotics/Automated Systems Technicians. Task Analysis and Descriptions of Required Job Competencies of Robotics/Automated Systems Technicians.

    Science.gov (United States)

    Hull, Daniel M.; Lovett, James E.

    This report presents the results of research conducted to determine the current state of the art of robotics/automated systems technician (RAST) training offered in the United States. Section I discusses the RAST curriculum project, of which this state-of-the-art review is a part, and offers a RAST job description. Section II describes the…

  3. Orphan diseases: state of the drug discovery art.

    Science.gov (United States)

    Volmar, Claude-Henry; Wahlestedt, Claes; Brothers, Shaun P

    2017-06-01

    Since 1983 more than 300 drugs have been developed and approved for orphan diseases. However, considering the development of novel diagnosis tools, the number of rare diseases vastly outpaces therapeutic discovery. Academic centers and nonprofit institutes are now at the forefront of rare disease R&D, partnering with pharmaceutical companies when academic researchers discover novel drugs or targets for specific diseases, thus reducing the failure risk and cost for pharmaceutical companies. Considerable progress has occurred in the art of orphan drug discovery, and a symbiotic relationship now exists between pharmaceutical industry, academia, and philanthropists that provides a useful framework for orphan disease therapeutic discovery. Here, the current state-of-the-art of drug discovery for orphan diseases is reviewed. Current technological approaches and challenges for drug discovery are considered, some of which can present somewhat unique challenges and opportunities in orphan diseases, including the potential for personalized medicine, gene therapy, and phenotypic screening.

  4. Pattern Recognition and Natural Language Processing: State of the Art

    Directory of Open Access Journals (Sweden)

    Mirjana Kocaleva

    2016-05-01

    Full Text Available Development of information technologies is growing steadily. With the latest software technologies development and application of the methods of artificial intelligence and machine learning intelligence embededs in computers, the expectations are that in near future computers will be able to solve problems themselves like people do. Artificial intelligence emulates human behavior on computers. Rather than executing instructions one by one, as theyare programmed, machine learning employs prior experience/data that is used in the process of system’s training. In this state of the art paper, common methods in AI, such as machine learning, pattern recognition and the natural language processing (NLP are discussed. Also are given standard architecture of NLP processing system and the level thatisneeded for understanding NLP. Lastly the statistical NLP processing and multi-word expressions are described.

  5. Where is your state of the art?

    Science.gov (United States)

    Ríos Gaona, Manuel

    2015-04-01

    Beyond the purposes of publishing, questioning and/or hypothesizing, every research has the noble aim to quench the constant human need of pushing farther away the boundaries of knowledge, may such frontier exist. The state of the art is the generic expression coined to limit the whereabouts of any particular knowledge. We use it just like a compass, it tells us how far we are, what has been done and where we should go. Take for instance quantum field theory, the state of the art in particle physics will tell you that everything that exists in this universe is made of bosons, quarks and leptons. What!?. Hold on, I was taught (and luckily maybe you weren't) that the fundamental particles were electrons, neutrons and protons, right?. Indeed, that is the state of the art but from almost one century ago. So, if I may ask... where is your state of the art? This is not about quantum physics; it is not even about hydrology; it is about everything. Today, everybody doing or not a PhD fiercely believes that their research is important, extremely unique, life changing (and help us God if we are wrong); but how can you be so sure that what you do, isn't already done?. We live in a modern world, cool environmental scientists now have tagged this era as the Anthropocene; globalization is everywhere and of course knowledge has not escaped to it. Not only knowledge is now global but is totally diversified, any crazy idea you can think of (or actually you can't) it is very likely that somebody already has his/hers hands on it. Nevertheless, this is a good thing, isn't it?. Well, that is the whole point. Every time I should write my research's state of the art, I always get overwhelmed because it actually is pretty difficult to establish, and later when I think I get it, it seems that I am solving issues that somebody already bothered to solve 30 years ago. Therefore, does it really have some purpose to be swimming in a huge pool of knowledge, not knowing where exactly I am? or

  6. State of the Art in the Cramer Classification Scheme and ...

    Science.gov (United States)

    Slide presentation at the SOT FDA Colloquium on State of the Art in the Cramer Classification Scheme and Threshold of Toxicological Concern in College Park, MD. Slide presentation at the SOT FDA Colloquium on State of the Art in the Cramer Classification Scheme and Threshold of Toxicological Concern in College Park, MD.

  7. State-of-art report on digital I and C system reliability issues for nuclear power plants

    International Nuclear Information System (INIS)

    Hwang, In Koo; Lee, Dong Gyoung; Cha, Kyung Ho; Kwon, Kee Choon; Wood, Richard T.

    2000-01-01

    As the instrumentation and control (Iand C) equipment suppliers tend to provide digital components rather than conventional analog type components for instrument and control systems of nuclear power plants(NPPs), it is unavoidable to adopt digital equipment for safety I and C systems as well as non-safety systems. However, the full introduction of digital equipment to I and C systems of nuclear power plants raises several concerns which have not been considered for conventional analog I and C systems. The two major examples of the issues of digital systems are electromagnetic compatibility (EMC) and software reliability. KAERI invited a technical expert, Dr. Richard T. Wood, from Oak Ridge National Laboratory (ORNL) in Unites States and held seminars to recognize the state-of-art of the above issues and to share the information on techniques dealing with the problems. Dr. Wood has been working on the development of EMC guidelines and technical basis in using digital equipment for safety systems in nuclear power plants on the sponsorship of US Nuclear Regulatory Commission (NRC). Being based on his statements and discussions during his visit, this report describes technical considerations and issues on digital safety I and C system application in NPPs, EMC methods, environmental effects vulnerable to digital components, reliability assurance methods, etc. (author)

  8. State of the art on bioethanol production

    International Nuclear Information System (INIS)

    Barisano, D.; De Bari, I.; Viola, E.; Zimbardi, F.; Braccio, G.; Cantarella, M.; Gallifuoco, A.

    2001-01-01

    The state of the art, deals with the ethanol production from current processes based on the use of sugar and starch as feedstock and those under development based on lignocellulosic biomass. In the first section are reported the commercially available processes together with hints to the newest technologies. As regard the ethanol production from lignocellulosics, it has been collected data on the biomass availability in Europe as energy crops, industrial crops, agricultural residues and domestic waste. It is provided a bibliographic study on the technologies and processes under development worldwide for the conversion of lignocellulosics into ethanol. Finally, a brief discussion on the economics highlights the near term viability of producing ethanol by this way [it

  9. Theory and state-of-the-art technology of software reliability

    International Nuclear Information System (INIS)

    Suzudo, Tomoaki; Watanabe, Norio

    1999-11-01

    Since FY 1997 , the Japan Atomic Energy Research Institute has been conducting a project , Study on Reliability of Digital I and C Systems. As part of the project , the methodologies and tools to improve software reliability were reviewed in order to examine the theory and the state-of-the-art technology in this field. It is surmised, as results from the review, that computerized software design and implementation tool (CASE tool), algebraic analysis to ensure the consistency between software requirement framework and its detailed design specification, and efficient test method using the internal information of the software (white-box test) at the validation phase just before the completion of the development will play a key role to enhance software reliability in the future. (author)

  10. The Development of Evaluation Model for Internal Quality Assurance System of Dramatic Arts College of Bunditpattanasilpa Institute

    Science.gov (United States)

    Sinthukhot, Kittisak; Srihamongkol, Yannapat; Luanganggoon, Nuchwana; Suwannoi, Paisan

    2013-01-01

    The research purpose was to develop an evaluation model for the internal quality assurance system of the dramatic arts College of Bunditpattanasilpa Institute. The Research and Development method was used as research methodology which was divided into three phases; "developing the model and its guideline", "trying out the actual…

  11. Review of state-of-the-art decision support systems (DSSs) for prevention and suppression of forest fires

    Institute of Scientific and Technical Information of China (English)

    Stavros Sakellariou; Stergios Tampekis; Fani Samara; Athanassios Sfougaris; Olga Christopoulou

    2017-01-01

    Forest ecosystems are our priceless natural resource and are a key component of the global carbon budget. Forest fires can be a hazard to the viability and sustainable management of forests with consequences for natural and cultural environments, economies, and the life quality of local and regional populations. Thus, the selec-tion of strategies to manage forest fires, while considering both functional and economic efficiency, is of primary importance. The use of decision support systems (DSSs) by managers of forest fires has rapidly increased. This has strengthened capacity to prevent and suppress forest fires while protecting human lives and property. DSSs are a tool that can benefit incident management and decision making and policy, especially for emergencies such as natural disasters. In this study we reviewed state-of-the-art DSSs that use:database management systems and mathematical/economic algorithms for spatial optimization of firefighting forces; forest fire simulators and satellite technology forimmediate detection and prediction of evolution of forest fires; GIS platforms that incorporate several tools to manipulate, process and analyze geographic data and develop strategic and operational plans.

  12. The state-of-the-art of ART restorations.

    Science.gov (United States)

    Frencken, Jo E

    2014-04-01

    ART is less anxiety- and pain-provoking than traditional restorative treatments; administration of local anaesthesia is rarely required. Systematic reviews have provided evidence of the high level of effectiveness of high-viscosity glass-ionomer ART restoration in restoring single-surface cavities, both in primary and permanent posterior teeth, but its survival rates in restoring multiple-surface cavities in primary posterior teeth needs to be improved. Insufficient information is available regarding the survival rates of multiple-surface ART restorations in permanent teeth. Evidence from these reviews indicates no difference in the survival rates of single-surface high-viscosity glass-ionomer ART restorations and amalgam restorations in primary and permanent posterior teeth. Where indicated, high-viscosity glass-ionomer ART restorations can be used alongside traditional restorations. ART provides a much more acceptable introduction to dental restorative care than the traditional 'injection, drill and fill'.

  13. Fall prevention intervention technologies: A conceptual framework and survey of the state of the art.

    Science.gov (United States)

    Hamm, Julian; Money, Arthur G; Atwal, Anita; Paraskevopoulos, Ioannis

    2016-02-01

    In recent years, an ever increasing range of technology-based applications have been developed with the goal of assisting in the delivery of more effective and efficient fall prevention interventions. Whilst there have been a number of studies that have surveyed technologies for a particular sub-domain of fall prevention, there is no existing research which surveys the full spectrum of falls prevention interventions and characterises the range of technologies that have augmented this landscape. This study presents a conceptual framework and survey of the state of the art of technology-based fall prevention systems which is derived from a systematic template analysis of studies presented in contemporary research literature. The framework proposes four broad categories of fall prevention intervention system: Pre-fall prevention; Post-fall prevention; Fall injury prevention; Cross-fall prevention. Other categories include, Application type, Technology deployment platform, Information sources, Deployment environment, User interface type, and Collaborative function. After presenting the conceptual framework, a detailed survey of the state of the art is presented as a function of the proposed framework. A number of research challenges emerge as a result of surveying the research literature, which include a need for: new systems that focus on overcoming extrinsic falls risk factors; systems that support the environmental risk assessment process; systems that enable patients and practitioners to develop more collaborative relationships and engage in shared decision making during falls risk assessment and prevention activities. In response to these challenges, recommendations and future research directions are proposed to overcome each respective challenge. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

  14. Preliminary Radiation Testing of a State-of-the-Art Commercial 14nm CMOS Processor/System-on-a-Chip

    Science.gov (United States)

    Szabo, Carl M., Jr.; Duncan, Adam; LaBel, Kenneth A.; Kay, Matt; Bruner, Pat; Krzesniak, Mike; Dong, Lei

    2015-01-01

    Hardness assurance test results of Intel state-of-the-art 14nm “Broadwell” U-series processor / System-on-a-Chip (SoC) for total ionizing dose (TID) are presented, along with exploratory results from trials at a medical proton facility. Test method builds upon previous efforts [1] by utilizing commercial laptop motherboards and software stress applications as opposed to more traditional automated test equipment (ATE).

  15. Preliminary Radiation Testing of a State-of-the-Art Commercial 14nm CMOS Processor - System-on-a-Chip

    Science.gov (United States)

    Szabo, Carl M., Jr.; Duncan, Adam; LaBel, Kenneth A.; Kay, Matt; Bruner, Pat; Krzesniak, Mike; Dong, Lei

    2015-01-01

    Hardness assurance test results of Intel state-of-the-art 14nm Broadwell U-series processor System-on-a-Chip (SoC) for total dose are presented, along with first-look exploratory results from trials at a medical proton facility. Test method builds upon previous efforts by utilizing commercial laptop motherboards and software stress applications as opposed to more traditional automated test equipment (ATE).

  16. A state-of-the-art plasma polymerization coater for ICF targets

    International Nuclear Information System (INIS)

    Devine, G.; Letts, S.; Cook, R.; Brusasco, R.

    1992-01-01

    Increasingly stringent demands on the characteristics of plasma polymer coatings for use in Inertial Confinement Fusion (ICF) experiments have created a need for a plasma Polymerization coating system with the capability of producing a wide variety of different types of coatings as well as one that can be used to do fundamental investigations of the process conditions leading to desirable films. We report on the construction and use of just such a coating instrument. We have recognized the usefulness of computer assisted process monitoring and control, currently being developed by the semiconductor industry, in designing our own, State-of-the-art plasma polymerization device. Our system is fully computer interfaced to provide the user with the capability of collecting system parameter data over the length of the deposition experiment. The system is also designed to allow for any degree of computer control of the deposition process in the future

  17. State of art in radiation tolerant camera

    Energy Technology Data Exchange (ETDEWEB)

    Choi; Young Soo; Kim, Seong Ho; Cho, Jae Wan; Kim, Chang Hoi; Seo, Young Chil

    2002-02-01

    Working in radiation environment such as nuclear power plant, RI facility, nuclear fuel fabrication facility, medical center has to be considered radiation exposure, and we can implement these job by remote observation and operation. However the camera used for general industry is weakened at radiation, so radiation-tolerant camera is needed for radiation environment. The application of radiation-tolerant camera system is nuclear industry, radio-active medical, aerospace, and so on. Specially nuclear industry, the demand is continuous in the inspection of nuclear boiler, exchange of pellet, inspection of nuclear waste. In the nuclear developed countries have been an effort to develop radiation-tolerant cameras. Now they have many kinds of radiation-tolerant cameras which can tolerate to 10{sup 6}-10{sup 8} rad total dose. In this report, we examine into the state-of-art about radiation-tolerant cameras, and analyze these technology. We want to grow up the concern of developing radiation-tolerant camera by this paper, and upgrade the level of domestic technology.

  18. One Step Closer to the Marketplace for State-of-the-Art Wind Turbine

    Science.gov (United States)

    Drivetrain | News | NREL One Step Closer to the Marketplace for State-of-the-Art Wind Turbine Drivetrain One Step Closer to the Marketplace for State-of-the-Art Wind Turbine Drivetrain April 1, 2016 modeling, and testing in state-of-the-art facilities designed to put the drivetrain through its paces

  19. Electrostatic Discharge (ESD and Electrical Overstress (EOS: The state of the art in components to systems

    Directory of Open Access Journals (Sweden)

    Steven H. Voldman

    2017-06-01

    Full Text Available Electrostatic Discharge (ESD, Electrical Overstress (EOS and electromagnetic compatibility (EMC continue to impact semiconductor manufacturing, semiconductor components and systems as technologies scale from micro- to nano-electronics. The range of concern for components include semiconductor components, magnetic recording industry, MEMs, and for products from disk drives, cell phones, notebooks, tablets, laptops, and desktop computers. The objective of this lecture is to address the state of the art of electrostatic discharge (ESD and electrical overstress (EOS in today’s electronic components and systems. The tutorial provides a clear picture of ESD, EOS and EMC phenomena, sources, physics, failure mechanisms, testing and qualification of components and systems. The conclusion of this talk is that ESD and EOS continue to be a concern in technologies from micro-electronics to nano-structures, and will remain a reliability and quality issue in the future.

  20. Model Based Mission Assurance in a Model Based Systems Engineering (MBSE) Framework: State-of-the-Art Assessment

    Science.gov (United States)

    Cornford, Steven L.; Feather, Martin S.

    2016-01-01

    This report explores the current state of the art of Safety and Mission Assurance (S&MA) in projects that have shifted towards Model Based Systems Engineering (MBSE). Its goal is to provide insight into how NASA's Office of Safety and Mission Assurance (OSMA) should respond to this shift. In MBSE, systems engineering information is organized and represented in models: rigorous computer-based representations, which collectively make many activities easier to perform, less error prone, and scalable. S&MA practices must shift accordingly. The "Objective Structure Hierarchies" recently developed by OSMA provide the framework for understanding this shift. Although the objectives themselves will remain constant, S&MA practices (activities, processes, tools) to achieve them are subject to change. This report presents insights derived from literature studies and interviews. The literature studies gleaned assurance implications from reports of space-related applications of MBSE. The interviews with knowledgeable S&MA and MBSE personnel discovered concerns and ideas for how assurance may adapt. Preliminary findings and observations are presented on the state of practice of S&MA with respect to MBSE, how it is already changing, and how it is likely to change further. Finally, recommendations are provided on how to foster the evolution of S&MA to best fit with MBSE.

  1. The art of designing embedded systems

    CERN Document Server

    Ganssle, Jack G

    2000-01-01

    Art of Designing Embedded Systems is apart primer and part reference, aimed at practicing embedded engineers, whether working on the code or the hardware design. Embedded systems suffer from a chaotic, ad hoc development process. This books lays out a very simple seven-step plan to get firmware development under control. There are no formal methodologies to master; the ideas are immediately useful. Most designers are unaware that code complexity grows faster than code size. This book shows a number of ways to linearize the complexity/size curve and get products out faster

  2. The State of Comic Art Bibliography in North America

    Directory of Open Access Journals (Sweden)

    Michael Rhode

    2010-08-01

    Full Text Available Within the past two decades, several American bibliographies of comic art have been published to aid in research on comics and cartooning. Professor John Lent’s ten-volume Comic Art Bibliographies is one of the largest such projects and he began it with a self-published volume in 1986. Librarian Randy Scott published The Comic Art Collection Catalog: An Author, Artist, Title and Subject Catalog Of The Comic Art Collection, Special Collections Division, Michigan State University Libraries, whi...

  3. Implementation and Use of State-of-the-Art, Cell-Based In Vitro Assays.

    Science.gov (United States)

    Langer, Gernot

    2016-01-01

    The impressive advances in the generation and interpretation of functional omics data have greatly contributed to a better understanding of the (patho-)physiology of many biological systems and led to a massive increase in the number of specific targets and phenotypes to investigate in both basic and applied research. The obvious complexity revealed by these studies represents a major challenge to the research community and asks for improved target characterisation strategies with the help of reliable, high-quality assays. Thus, the use of living cells has become an integral part of many research activities because the cellular context more closely represents target-specific interrelations and activity patterns. Although still predominant, the use of traditional two-dimensional (2D) monolayer cell culture models has been gradually complemented by studies based on three-dimensional (3D) spheroid (Sutherland 1988) and other 3D tissue culture systems (Santos et al. 2012; Matsusaki et al. 2014) in an attempt to employ model systems more closely representing the microenvironment of cells in the body. Hence, quite a variety of state-of-the-art cell culture models are available for the generation of novel chemical probes or the identification of starting points for drug development in translational research and pharma drug discovery. In order to cope with these information-rich formats and their increasing technical complexity, cell-based assay development has become a scientific research topic in its own right and is used to ensure the provision of significant, reliable and high-quality data outlasting any discussions related to the current "irreproducibility epidemic" (Dolgin 2014; Prinz et al. 2011; Schatz 2014). At the same time the use of cells in microplate assay formats has become state of the art and greatly facilitates rigorous cell-based assay development by providing the researcher with the opportunity to address the multitude of factors affecting the actual

  4. State of the art in microfabrication

    NARCIS (Netherlands)

    Schmitz, Jurriaan

    2014-01-01

    In this review paper the state of the art in microfabrication is presented. The focus is on trends in integrated circuit fabrication by mainstream industrial players. The article starts with Moore’s Law, describing its inception as well as the evolution of Moore’s metric of the number of components

  5. A state-of-the-art mass spectrometer system for determination of uranium and plutonium isotopic distributions in process samples

    International Nuclear Information System (INIS)

    Polson, C.A.

    1984-01-01

    A Finnigan MAT 261 automated thermal ionization mass spectrometer system was purchased by the Savannah River Plant and recently installed by Finnigan factory representatives. This instrument is a refinement of the MAT 260 which has been used routinely for three years in the laboratory at SRP. The MAT 261 is a highly precise, fully automated instrument. Many features make this instrument the state-of-the-art technology in precision isotopic composition measurements. A unique feature of the MAT 261 is the ion detection system which permits measurement of the three uranium or plutonium masses simultaneously. All Faraday cup measuring channels are of the same design and each is equipped with a dedicated amplifier. Each amplifier is connected to a linear voltage/frequency measuring system for ion current integration. These outputs are fed into a Hewlett-Packard 9845T desktop computer. The computer, and the Finnigan developed software package, control filament heating cycles, sample reconditioning, ion beam focusing, carrousel rotation, mass selection, and data collection and reduction. Precision, accuracy, and linearity were determined under normal laboratory conditions using a NBS uranium suite of standards. These results along with other developments in setting up the instrument are presented

  6. Wind power forecasting : state-of-the-art 2009.

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, C.; Bessa, R.; Miranda, V.; Botterud, A.; Wang, J.; Conzelmann, G.; Decision and Information Sciences; INESC Porto

    2009-11-20

    uncertainty in wind power and to more efficiently operate power systems with large wind power penetrations. Moreover, in a market environment, the wind power contribution to the generation portofolio becomes important in determining the daily and hourly prices, as variations in the estimated wind power will influence the clearing prices for both energy and operating reserves. With the increasing penetration of wind power, WPF is quickly becoming an important topic for the electric power industry. System operators (SOs), generating companies (GENCOs), and regulators all support efforts to develop better, more reliable and accurate forecasting models. Wind farm owners and operators also benefit from better wind power prediction to support competitive participation in electricity markets against more stable and dispatchable energy sources. In general, WPF can be used for a number of purposes, such as: generation and transmission maintenance planning, determination of operating reserve requirements, unit commitment, economic dispatch, energy storage optimization (e.g., pumped hydro storage), and energy trading. The objective of this report is to review and analyze state-of-the-art WPF models and their application to power systems operations. We first give a detailed description of the methodologies underlying state-of-the-art WPF models. We then look at how WPF can be integrated into power system operations, with specific focus on the unit commitment problem.

  7. A state-of-the-art report on the development of liquid metal reactor materials

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yung Suk; Noh, Kye Hoh; Han, Jung Hoh; Park, Jee Yun; Lee, Duk Hyun; Suh, Jung Hoon; Park, Kee Sung; Jung, Choong Hwan [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1993-09-01

    A state-of-the are survey on the LMR materials - core and structural materials and the others - has been conducted. For core materials, ferritic steels with superior swelling resistance such as HT-9 or PNC-FMS and the ODS steels are found to be one of the best candidates for the cladding and wrapper tubes, respectively. As boron carbide presently used for a neutron absorber also needs to extend its life time, much attention is now being paid to the development of a coated pellets and a kind of cermet made of boron carbide and metal in order to eliminate the control rod failure. As structural materials for pressure vessel, pipe and steam generator, the 316 MN SS with lower carbon and medium nitrogen compared to the 316 SS and 9Cr-1Mo ferritic steels are well recommended, respectively. The inelastic analytical model and the evaluation methodology to predict creep fatigue life time have been reviewed. On the other hand, a state of the art survey on the EMP coil/insulator materials has been conducted and the feasibility of the functionally gradient materials such as ZrO2-304 SS has also been investigated. 89 figs., 34 tabs., 131 refs. (Author).

  8. Leadless Pacemakers: State of the Art and Future Perspectives.

    Science.gov (United States)

    Della Rocca, Domenico G; Gianni, Carola; Di Biase, Luigi; Natale, Andrea; Al-Ahmad, Amin

    2018-03-01

    Leadless pacemaker therapy is a new technology that aims at avoiding lead- and pocket-related complications of conventional transvenous and epicardial pacing. To date, 2 self-contained leadless pacemakers for right ventricular pacing have been clinically available: the Nanostim Leadless Pacemaker System and the Micra Transcatheter Pacing System. Additionally, a new multicomponent leadless pacemaker for endocardial left ventricular pacing has been proposed as an alternative choice for cardiac resynchronization therapy. In this review, we describe the state of the art of leadless pacing and compare the currently available devices with traditional transvenous leadless pacemakers. Copyright © 2017 Elsevier Inc. All rights reserved.

  9. State-of-the-art of home networking

    NARCIS (Netherlands)

    Koonen, A.M.J.; Popov, M.

    2012-01-01

    To introduce the Symposium on "Indoor Optical Networks: a Promising Way to a Converged Service Delivery", this presentation will give a brief overview of state-of-the-art home networking architectures, technologies and applications covering both technical and techno-economic aspects.

  10. INFORMATION STORAGE AND RETRIEVAL, A STATE-OF-THE-ART REPORT

    Science.gov (United States)

    The objective of the study was to compile relevant background and interpretive material and prepare a state-of-the-art report which would put the...to-person communications. Section III presents basic IS and R concepts and techniques. It traces the history of traditional librarianship through...the process of communication between the originators and users of information. Section V categorizes the information system operations required to

  11. State of art of nuclear telerobots

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Ji Sup; Oh, S C; Park, Y S; Kim, K S

    1997-03-01

    A state-of-the-art survey on telerobotics technology for nuclear applications is made with view to provide technical data base to interested users. Most of the information are gathered from G7 countries with some addition of Korean status of development. Although the bulk of information is focussed on mobile robots, graphic simulation for man-machine interface is also included in the survey. Examples of telerobotics application to nuclear work are investigated. (author). 108 refs., 9 tabs., 64 figs

  12. New simulators from old - achieving state-of-the-art simulation without state-of-the-art costs

    International Nuclear Information System (INIS)

    Heilmeier, H.J.; Rosser, R.M.; Fyffe, K.L.; Gaerttner, G.F.; Chulick, E.T.

    1990-01-01

    Achieving a state-of-the-art simulator for operator training requires neither the expensive remodeling of old simulators nor the acquisition of very expensive new machines. In this paper the authors present two distinct cases where older training simulators have been upgraded to meet training requirements with a minimum of inexpensive hardware additions, including plug-in/-out panels, and software changes

  13. Supplier selection problem: A state-of-the-art review

    Directory of Open Access Journals (Sweden)

    Nilesh R. Ware

    2012-08-01

    Full Text Available In the global competitiveness and growing market environment, “Actual competition is not between firms against firm, than supplier against supplier”. Globally in the fastest market development world gets closer and closer. Consumers prefer fast delivery, economical product, excellent service and high quality product with desired service level. For successful management of this supply chain, supplier considered as the base source for all processes. Therefore, an efficient supplier selection and evaluation process needs to be incorporate. The main purpose of this paper is to provide an extensive state-of-the-art literature review and critique of the studies related to various aspects of supplier selection problem over the past two decades. Research papers appearing in the reputed and leading international journals from 1991 to 2011 are gathered and analyzed. Primary focus is given on more than 200 published and unpublished works. It has been referred extensively to carry out state-of-the-art review for supplier selection problem. Finally, paper provides future perspective based on current research trends available in the published literature.

  14. The state of art of the methods for thermohydraulics design of LMFBR fuel elements

    International Nuclear Information System (INIS)

    Fernandez y Fernandez, E.; Carajilescov, P.

    1981-09-01

    The present (experimental and analytical) state of art of the methods for thermohydraulics design of LMFBR fuel elements is analyzed. A development program is suggested, in order to obtain a computer code for modelling the distribution of coolant enthalpy in reactor core. This computer code is in development. (Author) [pt

  15. 14 CFR 1203.403 - State-of-the-art and intelligence.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false State-of-the-art and intelligence. 1203.403... PROGRAM Guides for Original Classification § 1203.403 State-of-the-art and intelligence. A logical... available from intelligence sources is known or is available to others. It is also important to consider...

  16. State of the art on the probabilistic safety assessment (P.S.A.); Etat de l'art sur les etudes probabilistes de surete (E.P.S.)

    Energy Technology Data Exchange (ETDEWEB)

    Devictor, N.; Bassi, A.; Saignes, P.; Bertrand, F

    2008-07-01

    The use of Probabilistic Safety Assessment (PSA) is internationally increasing as a means of assessing and improving the safety of nuclear and non-nuclear facilities. To support the development of a competence on Probabilistic Safety Assessment, a set of states of the art regarding these tools and their use has been made between 2001 and 2005, in particular on the following topics: - Definition of the PSA of level 1, 2 and 3; - Use of PSA in support to design and operation of nuclear plants (risk-informed applications); - Applications to Non Reactor Nuclear Facilities. The report compiled in a single document these states of the art in order to ensure a broader use; this work has been done in the frame of the Project 'Reliability and Safety of Nuclear Facility' of the Nuclear Development and Innovation Division of the Nuclear Energy Division. As some of these states of the art have been made in support to exchanges with international partners and were written in English, a section of this document is written in English. This work is now applied concretely in support to the design of 4. Generation nuclear systems as Sodium-cooled Fast Reactors and especially Gas-cooled Fast Reactor, that have been the subject of communications during the conferences ANS (Annual Meeting 2007), PSA'08, ICCAP'08 and in the journal Science and Technology of Nuclear Installations. (authors)

  17. Microwave ablation of renal tumors: state of the art and development trends.

    Science.gov (United States)

    Floridi, Chiara; De Bernardi, Irene; Fontana, Federico; Muollo, Alessandra; Ierardi, Anna Maria; Agostini, Andrea; Fonio, Paolo; Squillaci, Ettore; Brunese, Luca; Fugazzola, Carlo; Carrafiello, Gianpaolo

    2014-07-01

    In the last decades an increased incidence of new renal tumor cases has been for clinically localized, small tumors elderly patients, with medical comorbidities whom the risk of surgical complications may pose a greater risk of death than that due to the tumor itself. In these patients, unsuitable for surgical approach, thermal ablation represents a valid alternative to traditional surgery. Thermal ablation is a less invasive, less morbid treatment option thanks to reduced blood loss, lower incidence of complications during the procedure and a less long convalescence. At present, the most widely used thermal ablative techniques are cryoablation, radiofrequency ablation and microwave ablation (MWA). MWA offers many benefits of other ablation techniques and offers several other advantages: higher intratumoral temperatures, larger tumor ablation volumes, faster ablation times, the ability to use multiple applicators simultaneously, optimal heating of cystic masses and tumors close to the vessels and less procedural pain. This review aims to provide the reader with an overview about the state of the art of microwave ablation for renal tumors and to cast a glance on the new development trends of this technique.

  18. How the United States Funds the Arts. Third Edition

    Science.gov (United States)

    National Endowment for the Arts, 2012

    2012-01-01

    The infrastructure for arts and cultural support in the United States is complex and adaptive. Citizens who enjoy the arts can choose from a wide array of drama, visual and media arts, dance, music, and literature available in formal and informal settings--theaters, museums, and concert halls, but also libraries, schools, places of worship,…

  19. Platelet kinetics: the state of the art

    International Nuclear Information System (INIS)

    Heyns, A. duP

    1984-01-01

    In this paper an overview of the state of the art of platelet kinetics 1982 is presented. The subjects considered include a discussion of the advantages and disadvantages of some of the many radionuclide platelet labels, viz 51 Cr, 111 In, focussing briefly on models for analysis of platelets survival. (Auth.)

  20. State-of-the-art in Heterogeneous Computing

    Directory of Open Access Journals (Sweden)

    Andre R. Brodtkorb

    2010-01-01

    Full Text Available Node level heterogeneous architectures have become attractive during the last decade for several reasons: compared to traditional symmetric CPUs, they offer high peak performance and are energy and/or cost efficient. With the increase of fine-grained parallelism in high-performance computing, as well as the introduction of parallelism in workstations, there is an acute need for a good overview and understanding of these architectures. We give an overview of the state-of-the-art in heterogeneous computing, focusing on three commonly found architectures: the Cell Broadband Engine Architecture, graphics processing units (GPUs, and field programmable gate arrays (FPGAs. We present a review of hardware, available software tools, and an overview of state-of-the-art techniques and algorithms. Furthermore, we present a qualitative and quantitative comparison of the architectures, and give our view on the future of heterogeneous computing.

  1. State-of-the-art radioecological models implemented in decision support systems for the management of the fresh water environment

    International Nuclear Information System (INIS)

    Monte, Luigi

    2007-01-01

    The present lecture summarises the main results of a review and assessment of state-of-the-art models implemented in computerised decision support systems aimed at assisting the management of fresh water ecosystems contaminated by radioactive substances. The approaches of the various models to simulate the complex behaviour of radionuclides in the aquatic environment were discussed. A critical analysis of the whole sector was carried out in order to frame in a comprehensive perspective several complementary issues: model uncertainty, environmental variability, information incompleteness, multi-model approach, use of models for the decision making. (author)

  2. State-of-the-art incore detector system provides operational and safety benefits: Example, Hanford N Reactor

    International Nuclear Information System (INIS)

    Toffer, H.

    1988-08-01

    A presentation on the operational and safety benefits that can be derived from a state-of-the-art incore neutron monitoring system has been prepared for the DOE/ANL training course on ''The Potential Safety Impact of New and Emerging Technologies on the Operation of DOE Nuclear Facilities.'' Advanced incore neutron flux monitoring systems have been installed in some commercial reactors and should be considered for any new reactor designs or as backfits to existing plants. The recent installation of such a system at the Hanford N Reactor is used as an example in this presentation. Unfortunately, N Reactor has been placed in a cold standby condition and the full core incore system has not been tested under power conditions. Nevertheless, the evaluations that preceded the installation of the full core system provide interesting insight into the operational and safety benefits that could be expected

  3. The Arts and State Governments: At Arm's Length or Arm in Arm?

    Science.gov (United States)

    Lowell, Julia F.; Ondaatje, Elizabeth Heneghan

    2006-01-01

    Even though a majority of Americans claim to support public funding of the arts, state government spending on the arts is minimal--and may be losing ground relative to other types of state expenditures. Moreover, most state arts agencies, or SAAs, have not succeeded in convincing state government leaders that the arts should be integral to their…

  4. An Inquiry of How Art Education Policies Are Reflected in Art Teacher Preparation: Examining the Standards for Visual Arts and Art Teacher Certification

    Science.gov (United States)

    Lim, Kyungeun

    2017-01-01

    Policy changes influence various aspects of art education such as K-12 art education curricula, state licensure systems, and contexts of art teacher preparation. Despite strong relationships between art education policy and practical fields, few studies have attempted to understand art education from the perspective of policy analysis. This study…

  5. Exchange rate predictability and state-of-the-art models

    OpenAIRE

    Yeșin, Pınar

    2016-01-01

    This paper empirically evaluates the predictive performance of the International Monetary Fund's (IMF) exchange rate assessments with respect to future exchange rate movements. The assessments of real trade-weighted exchange rates were conducted from 2006 to 2011, and were based on three state-of-the-art exchange rate models with a medium-term focus which were developed by the IMF. The empirical analysis using 26 advanced and emerging market economy currencies reveals that the "diagnosis" of ...

  6. The state of the art in intrusion prevention and detection

    CERN Document Server

    Pathan, Al-Sakib Khan

    2013-01-01

    The State of the Art in Intrusion Prevention and Detection analyzes the latest trends and issues surrounding intrusion detection systems in computer networks, especially in communications networks. Its broad scope of coverage includes wired, wireless, and mobile networks; next-generation converged networks; and intrusion in social networks.Presenting cutting-edge research, the book presents novel schemes for intrusion detection and prevention. It discusses tracing back mobile attackers, secure routing with intrusion prevention, anomaly detection, and AI-based techniques. It also includes infor

  7. 77 FR 5281 - State-of-the-Art Reactor Consequence Analyses Reports

    Science.gov (United States)

    2012-02-02

    ... NUCLEAR REGULATORY COMMISSION [Docket ID: NRC-2012-0022] State-of-the-Art Reactor Consequence... release of Draft NUREG-1935, ``State-of-the-Art Reactor Consequence Analyses (SOARCA) Report,'' for public... offsite radiological health consequences for potential severe reactor accidents for the Peach Bottom...

  8. State-of-the-art computer technologies used to train nuclear specialists and to conduct research

    International Nuclear Information System (INIS)

    Korovin, Yu.A.; Tikhonenko, A.V.

    2011-01-01

    The paper discusses innovative methods used in the process of training nuclear specialists and conducting research which are based on state-of-the-art computer technologies. The approach proposed makes wide use of mathematical modeling and state-of-the-art programming techniques. It is based on the development, improvement and application of problem-oriented computer codes to support the teaching process and to solve fundamental and applied problems of nuclear physics and nuclear engineering.

  9. A "Common" Vision of Instruction? An Analysis of English/Language Arts Professional Development Materials Related to the Common Core State Standards

    Science.gov (United States)

    Hodge, Emily; Benko, Susanna L.

    2014-01-01

    The purpose of this article is to describe the stances put forward by a selection of professional development resources interpreting the Common Core State Standards for English Language Arts (ELA) teachers, and to analyse where these resources stand in relation to research in ELA. Specifically, we analyse resources written by English educators…

  10. [Art therapy and the promotion of child development in a hospitalization context].

    Science.gov (United States)

    Valladares, Ana Cláudia Afonso; da Silva, Mariana Teixeira

    2011-09-01

    This study aimed to evaluate and compare the development of hospitalized children before and after art therapy interventions. Qualitative case studies were undertaken in this descriptive-exploratory research, based on the developmental evaluation of the children. The study participants were five children between seven and ten years old, in the Hospital of Tropical Illnesses (HDT) in the city of Goiânia, state of Goiás, Brazil, in 2006. Results showed that art therapy interventions efficiently promoted children's development. Art therapy is a resource for positively channeling the variables of hospitalized children's development and for neutralizing affective factors that naturally appear, as well as for exposing the child's healthier potentials, which sometimes receive little stimulus in the context of hospitalization.

  11. Nuclear scanning microprobe: state of the art, applications and progress trends

    International Nuclear Information System (INIS)

    Ponomarev, A.G.

    2011-01-01

    The physical principles of nuclear scanning microprobe are considered. The analysis of state of the art of the microprobe setup from point of view of its spatial resolution and sensitivity of microanalysis techniques is given. The regions of nuclear microprobe applications are reviewed. The ways of spatial resolution and data acquisition system improvement under consideration of microprobe setup progress trends are considered. (authors)

  12. Entrepreneurship Education: State of the Art

    Directory of Open Access Journals (Sweden)

    José Carlos Sánchez García

    2017-10-01

    Full Text Available Job uncertainty and ambiguity is a reality in many current societies, therefore, the idea of self-employment has taken a more active role, not only out of necessity, but also because it brings innovation and development to societies. In view of this situation, the following question arises: how can we strengthen the entrepreneurial spirit of our students? This article has the objective to collect theoretical information of the state of the art on entrepreneurship education: what it has been, what it is, and what can it be, in order to present the current condition of the topic, both in the psychological and pedagogical field. To achieve this objective, information from 108 research sources, mainly from scientific articles and books was collected, concluding that, although generally, entrepreneurship education has significantly contributed to the creation of businesses, developing countries, specifically, those in Latin America, still require extra effort to fully implement entrepreneurship topic in the curriculums, particularly because of challenges such as political instability, technology and international competition.

  13. ART/Ada and CLIPS/Ada

    Science.gov (United States)

    Culbert, Chris

    1990-01-01

    Although they have reached a point of commercial viability, expert systems were originally developed in artificial intelligence (AI) research environments. Many of the available tools still work best in such environments. These environments typically utilize special hardware such as LISP machines and relatively unfamiliar languages such as LISP or Prolog. Space Station applications will require deep integration of expert system technology with applications developed in conventional languages, specifically Ada. The ability to apply automation to Space Station functions could be greatly enhanced by widespread availability of state-of-the-art expert system tools based on Ada. Although there have been some efforts to examine the use of Ada for AI applications, there are few, if any, existing products which provide state-of-the-art AI capabilities in an Ada tool. The goal of the ART/Ada Design Project is to conduct research into the implementation in Ada of state-of-the-art hybrid expert systems building tools (ESBT's). This project takes the following approach: using the existing design of the ART-IM ESBT as a starting point, analyze the impact of the Ada language and Ada development methodologies on that design; redesign the system in Ada; and analyze its performance. The research project will attempt to achieve a comprehensive understanding of the potential for embedding expert systems in Ada systems for eventual application in future Space Station Freedom projects. During Phase 1 of the project, initial requirements analysis, design, and implementation of the kernel subset of ART-IM functionality was completed. During Phase 2, the effort has been focused on the implementation and performance analysis of several versions with increasing functionality. Since production quality ART/Ada tools will not be available for a considerable time, and additional subtask of this project will be the completion of an Ada version of the CLIPS expert system shell developed by NASA

  14. Non-animal sensitization testing: state-of-the-art.

    Science.gov (United States)

    Vandebriel, Rob J; van Loveren, Henk

    2010-05-01

    Predictive tests to identify the sensitizing properties of chemicals are carried out using animals. In the European Union timelines for phasing out many standard animal tests were established for cosmetics. Following this policy, the new European Chemicals Legislation (REACH) favors alternative methods, if validated and appropriate. In this review the authors aim to provide a state-of-the art overview of alternative methods (in silico, in chemico, and in vitro) to identify contact and respiratory sensitizing capacity and in some occasions give a measure of potency. The past few years have seen major advances in QSAR (quantitative structure-activity relationship) models where especially mechanism-based models have great potential, peptide reactivity assays where multiple parameters can be measured simultaneously, providing a more complete reactivity profile, and cell-based assays. Several cell-based assays are in development, not only using different cell types, but also several specifically developed assays such as three-dimenionally (3D)-reconstituted skin models, an antioxidant response reporter assay, determination of signaling pathways, and gene profiling. Some of these assays show relatively high sensitivity and specificity for a large number of sensitizers and should enter validation (or are indeed entering this process). Integrating multiple assays in a decision tree or integrated testing system is a next step, but has yet to be developed. Adequate risk assessment, however, is likely to require significantly more time and efforts.

  15. Intracytoplasmic sperm injection: state of the art in humans.

    Science.gov (United States)

    Palermo, G D; O'Neill, C L; Chow, S; Cheung, S; Parrella, A; Pereira, N; Rosenwaks, Z

    2017-12-01

    Among infertile couples, 25% involve both male and female factors, while male factor alone accounts for another 25% due to oligo-, astheno-, teratozoospermia, a combination of the three, or even a complete absence of sperm cells in the ejaculate and can lead to a poor prognosis even with the help of assisted reproductive technology (ART). Intracytoplasmic sperm injection (ICSI) has been with us now for a quarter of a century and in spite of the controversy generated since its inception, it remains in the forefront of the techniques utilized in ART. The development of ICSI in 1992 has drastically decreased the impact of male factor, resulting in millions of pregnancies worldwide for couples who, without ICSI, would have had little chance of having their own biological child. This review focuses on the state of the art of ICSI regarding utility of bioassays that evaluate male factor infertility beyond the standard semen analysis and describes the current application and advances in regard to ICSI, particularly the genetic and epigenetic characteristics of spermatozoa and their impact on reproductive outcome. © 2017 Society for Reproduction and Fertility.

  16. The European reliability data system - ERDS: a state of the art and future developments

    International Nuclear Information System (INIS)

    Mancini, G.; Amesz, J.; Bastianini, P.; Capobianchi, S.

    1982-01-01

    In the frame of the Multiannual Nuclear Safety Programme of the Joint Research Centre of the Commisson of the European Communities, a project is being carried out aiming at the creation of a centralized data system collecting and organizing, at European level, information related to the operation of LWRs. The European Reliability Data System ERDS will exploit information already collected in national data systems and information deriving from single reactor sources. The paper describes the development of the four data systems constituting the ERDS: Component Event Data Bank; Abnormal Occurrences Reporting System; Operating Unit Status Report; Generic Reliability Parameter Data Bank

  17. The State of the Art in Cold Forging Lubrication

    DEFF Research Database (Denmark)

    Bay, Niels

    1994-01-01

    The manufature of components in steel, aluminium and copper alloys by cold forging production has increased ever since the 1950's. Typical processes are forward rod extrusion and backward can extrusion, upsetting, ironing, tube extrusion and radial extrusion. The tribological conditions in cold...... forging are extremely severe due to large surface expansion and normal pressure in the tool/workpiece interface combined with elevated tool temperatures. Except for the more simple cold forging operations successful production therefore requires advanced lubrication systems. The present paper gives...... a detailed description of the state of art for lubricant systems for cold forging of C-steels and low alloy steels as well as aluminium alloys including all the basic operations such as cleaning of the slugs, application of eventual conversion coating and lubrication. As regards cold forging of steel...

  18. The "State of Art" of Organisational Blogging

    Science.gov (United States)

    Baxter, Gavin J.; Connolly, Thomas M.

    2013-01-01

    Purpose: The aim of this paper is to provide an overview of the "state of art" of organisational blogging. It also aims to provide a critical review of the literature on organisational blogging and propose recommendations on how to advance the subject area in terms of academic research. Design/methodology/approach: A systematic literature review…

  19. Blade root design a state of the art survey

    Energy Technology Data Exchange (ETDEWEB)

    Sandberg, O

    1988-06-01

    This report was conceived in the wake of recent blade root failures in several horizontal axis turbines. Ten blade root designs are presented. They are considered to represent the state of the art. The information was obtained partly from literature partly from a few important projects with little or no documentation. Suggestions are made how to proceed in the development of the bonded bolt type of root retention. Presently the conclusion is that this type of arrangement seems the most promising. Developments in this field should be closely monitored, however. For this type of very high cycle fatigue designs there is a need for two redundant design principles. (author).

  20. Mission Accomplished: Working with State Arts Agencies

    Science.gov (United States)

    Boyer, Johanna Misey

    2005-01-01

    Most everyone involved professionally in the non-profit arts comes in contact with a state arts agency. A person may be on the Teaching Artist roster, works for a grantee organization, or has directly received a grant or fellowship. The work that one does in the school is probably funded by the state arts agency. Or, at a more basic level, the…

  1. Setting ART initiation targets in response to changing guidelines: The importance of addressing both steady-state and backlog.

    Science.gov (United States)

    Martin, Catherine; Naidoo, Nicolette P; Venter, W D Francois; Jaffer, Ambereen; Barker, Pierre M

    2014-05-12

    Target setting is useful in planning, assessing and improving antiretroviral treatment (ART) programmes. In the past 4 years, the ART initiation environment has been transformed due to the change in eligibility criteria (starting ART at a CD4+ count ART. To describe and illustrate the use of a target-setting model for estimating district-based targets in the era of an expanding ART programme and changing CD4+ count thresholds for ART initiation. Using previously described models and data for annual new HIV infections, we estimated both steady-state need for ART initiation and backlog in a North West Province district, accounting for the shift in eligibility. Comparison of actual v. targeted ART initiations was undertaken. The change in CD4+ count threshold adds a once-off group of newly eligible patients to the pool requiring ART - the backlog. The steady-state remains unchanged as it is determined by the annual rate of new HIV infections in previous years. The steady-state need for the district was 639 initiations/month, and the backlog was ~15,388 patients. After the shift in eligibility in September 2011, the steady-state target was exceeded over several months with some backlog addressed. Of the total backlog for this district, 72% remains to be cleared. South Africa has two pools of patients who need ART: the steady-state of HIV-infected patients entering the programme each year, determined by historical infection rates; and the backlog created by the shift in eligibility. The healthcare system needs to build long- term capacity to meet the steady-state need for ART and additional capacity to address the backlog.

  2. ART-Ada: An Ada-based expert system tool

    Science.gov (United States)

    Lee, S. Daniel; Allen, Bradley P.

    1991-01-01

    The Department of Defense mandate to standardize on Ada as the language for software systems development has resulted in increased interest in making expert systems technology readily available in Ada environments. NASA's Space Station Freedom is an example of the large Ada software development projects that will require expert systems in the 1990's. Another large scale application that can benefit from Ada based expert system tool technology is the Pilot's Associate (PA) expert system project for military combat aircraft. Automated Reasoning Tool (ART) Ada, an Ada Expert system tool is described. ART-Ada allow applications of a C-based expert system tool called ART-IM to be deployed in various Ada environments. ART-Ada is being used to implement several prototype expert systems for NASA's Space Station Freedom Program and the U.S. Air Force.

  3. Performative, Arts-Based, or Arts-Informed? Reflections on the Development of Arts-Based Research in Music Therapy.

    Science.gov (United States)

    Ledger, Alison; McCaffrey, Tríona

    2015-01-01

    Arts-based research (ABR) has emerged in music therapy in diverse ways, employing a range of interpretive paradigms and artistic media. It is notable that no consensus exists as to when and where the arts are included in the research process, or which music therapy topics are most suited to arts-based study. This diversity may pose challenges for music therapists who are developing, reading, and evaluating arts-based research. This paper provides an updated review of arts-based research literature in music therapy, along with four questions for researchers who are developing arts-based research. These questions are 1) When should the arts be introduced? 2) Which artistic medium is appropriate? 3) How should the art be understood? and 4) What is the role of the audience? We argue that these questions are key to understanding arts-based research, justifying methods, and evaluating claims arising from arts-based research. Rather than defining arts-based research in music therapy, we suggest that arts-based research should be understood as a flexible research strategy appropriate for exploring the complexities of music therapy practice. © the American Music Therapy Association 2015. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  4. From the art of war to fight with art

    DEFF Research Database (Denmark)

    Clausen, Lars

    2015-01-01

    systems theory with art. Martin Nore through his visual art develops and activistic form of system theory, where therapeutic intervention turns into societal self-therapy for broken meaning horizons and unintended consequences of the current massage of the form peace/war. The activistic systems...... theoretical art, the "artivistic" perspective developed from the broken minds of war experiences, diagnosed with Post-Traumatic Stress Disorder and Traumatic Brain Injury. Since then, it has broadened the perspective to demonstrate its capacity to work with the distinction between civil society and its...... outside. This is the fight with art, where the predominant selfdescriptions in western societies are questioned on their selflimitations and insufficient strategies of deparadoxation. In Martins art, the paradox of the structural coupling of body, mind and society as both distinct from each other...

  5. State-of-the-art report on radioactive waste disposal

    International Nuclear Information System (INIS)

    Larsson, A.

    1989-01-01

    In view of the considerable work required to develop repositories for radioactive waste, an extensive international co-operation has evolved within the area. The work has also engaged the IAEA to a great extent. The Agency has published a number of reports, covering different aspects of waste disposal. Following a recommendation by its Technical Review Committee on Underground Disposal (TRCUD) the Agency will publish a ''state-of-the-art'' report on radioactive waste disposal. The report is still in the preparation stage. In this article the principal subjects of the future report are discussed

  6. White biotechnology: State of the art strategies for the development of biocatalysts for biorefining.

    Science.gov (United States)

    Heux, S; Meynial-Salles, I; O'Donohue, M J; Dumon, C

    2015-12-01

    White biotechnology is a term that is now often used to describe the implementation of biotechnology in the industrial sphere. Biocatalysts (enzymes and microorganisms) are the key tools of white biotechnology, which is considered to be one of the key technological drivers for the growing bioeconomy. Biocatalysts are already present in sectors such as the chemical and agro-food industries, and are used to manufacture products as diverse as antibiotics, paper pulp, bread or advanced polymers. This review proposes an original and global overview of highly complementary fields of biotechnology at both enzyme and microorganism level. A certain number of state of the art approaches that are now being used to improve the industrial fitness of biocatalysts particularly focused on the biorefinery sector are presented. The first part deals with the technologies that underpin the development of industrial biocatalysts, notably the discovery of new enzymes and enzyme improvement using directed evolution techniques. The second part describes the toolbox available by the cell engineer to shape the metabolism of microorganisms. And finally the last part focuses on the 'omic' technologies that are vital for understanding and guide microbial engineering toward more efficient microbial biocatalysts. Altogether, these techniques and strategies will undoubtedly help to achieve the challenging task of developing consolidated bioprocessing (i.e. CBP) readily available for industrial purpose. Copyright © 2015 Elsevier Inc. All rights reserved.

  7. Information Systems for Nontraditional Study; The State-Of-The-Art.

    Science.gov (United States)

    Richards, Berry; Oakey, Joseph H.

    The information systems of nontraditional education are examined. Case studies illustrate the variation in nontraditional programs: Open University of Pennsylvania, British Open University, Prince George's County Library (Maryland), University Without Walls--Skidmore, Empire State College--Saratoga, Minnesota Metropolitan State College, and…

  8. State of the Art of Development and Application of Antiseismic Systems in Japan

    International Nuclear Information System (INIS)

    Kamada, Takayoshi; Fujita, Takafumi

    2008-01-01

    In Japan, after the Hanshin-Awaji earthquake, applications of anti-seismic systems have been much progressed. New design codes for base-isolated buildings were enacted in 2000. The objects of seismic isolation technologies expanded. The seismic isolation began to be used for structures such as high-rise building, artificial grounds for multiple buildings and cultural heritages, in addition to normal office buildings and residential ones. The seismic isolation also began to be used for industrial buildings such as semiconductor manufacturing factories which contain very sensitive equipment.This paper describes the current status of development and application of antiseismic systems to buildings, cultural heritage and industrial facilities in Japan

  9. For What Purpose the Arts? An Analysis of the Mission Statements of Urban Arts High Schools in Canada and the United States

    Science.gov (United States)

    Gaztambide-Fernández, Rubén; Nicholls, Rachael; Arráiz-Matute, Alexandra

    2016-01-01

    While general arts programs have declined in many schools across the United States and Canada, the number of specialized art programs in public secondary schools has swelled since the 1980s. While this increase is often celebrated by arts educators, questions about the justification of specialized arts programs are rarely raised, and their value…

  10. Exploring the Art and Science of Systems Engineering

    Science.gov (United States)

    Jansma, P. A.

    2012-01-01

    There has been much discussion of late in the NASA systems engineering community about the fact that systems engineering cannot be just about process and technical disciplines. The belief is that there is both an art and science to systems engineering, and that both aspects are necessary for designing and implementing a successful system or mission. How does one go about differentiating between and characterizing these two aspects? Some say that the art of systems engineering is about designing systems that not only function well, but that are also elegant, beautiful and engaging. What does that mean? How can you tell when a system has been designed with that holistic "art" component? This paper attempts to answer these questions by exploring various ways of looking at the Art and Science of Systems Engineering.

  11. Radiation physics of high power spallation targets. State of the art simulation methods and experiments, the 'European Spallation Source' (ESS)

    International Nuclear Information System (INIS)

    Filges, D.; Cloth, P.; Neef, R.D.; Schaal, H.

    1998-01-01

    Particle transport and nuclear interactions of planned high power spallation targets with GeV proton beams can be simulated using widely developed Monte Carlo transport methods. This includes available high energy radiation transport codes and systems for low energy, earlier developed for reactor physics and fusion technology. Monte Carlo simulation codes and applied methods are discussed. The capabilities of the world-wide existing state-of-the-art computer code systems are demonstrated. Results of computational studies for the 'European Spallation Source' (ESS) mercury high power target station are given. The needs for spallation related data and planned experiments are shown. (author)

  12. Seismic response of buried pipelines: a state-of-the-art review

    International Nuclear Information System (INIS)

    Datta, T.K.

    1999-01-01

    A state-of-the-art review of the seismic response of buried pipelines is presented. The review includes modeling of soil-pipe system and seismic excitation, methods of response analysis of buried pipelines, seismic behavior of buried pipelines under different parametric variations, seismic stresses at the bends and intersections of network of pipelines. pipe damage in earthquakes and seismic risk analysis of buried pipelines. Based on the review, the future scope of work on the subject is outlined. (orig.)

  13. State of the social responsibility art

    OpenAIRE

    Varela López, Leidy Viviana; Universidad de San Buenaventura Cali.

    2015-01-01

    From the eighties, it has been addressing the issue of corporate social responsibility, specifically toward the defense of human rights and climate change. However, although they have applied corporate social responsibility principles in some of the existing institutions, it is still very small the work being done around the specific activity of solid waste management. Some works have been compiled to build a state of the art for understanding in depth the concept of corporate social responsi...

  14. Comparative study of state-of-the-art myoelectric controllers for multigrasp prosthetic hands.

    Science.gov (United States)

    Segil, Jacob L; Controzzi, Marco; Weir, Richard F ff; Cipriani, Christian

    2014-01-01

    A myoelectric controller should provide an intuitive and effective human-machine interface that deciphers user intent in real-time and is robust enough to operate in daily life. Many myoelectric control architectures have been developed, including pattern recognition systems, finite state machines, and more recently, postural control schemes. Here, we present a comparative study of two types of finite state machines and a postural control scheme using both virtual and physical assessment procedures with seven nondisabled subjects. The Southampton Hand Assessment Procedure (SHAP) was used in order to compare the effectiveness of the controllers during activities of daily living using a multigrasp artificial hand. Also, a virtual hand posture matching task was used to compare the controllers when reproducing six target postures. The performance when using the postural control scheme was significantly better (p state machines during the physical assessment when comparing within-subject averages using the SHAP percent difference metric. The virtual assessment results described significantly greater completion rates (97% and 99%) for the finite state machines, but the movement time tended to be faster (2.7 s) for the postural control scheme. Our results substantiate that postural control schemes rival other state-of-the-art myoelectric controllers.

  15. State of the art report on design for X

    DEFF Research Database (Denmark)

    Papanikolaou, Apostolos; Andersen, Poul; Kristensen, Hans Otto Holmegaard

    2009-01-01

    The present State of the Art report aims at defining and reviewing the curent state of the ship design process in the frame of a holistic approach, accounting for various objectives and constraints. The report addresses mainly the design of transportation carriers, though some covered aspects...

  16. A State of the Art Overview

    DEFF Research Database (Denmark)

    Jahangiri, Tohid; Bak, Claus Leth; Silva, Filipe Miguel Faria da

    2015-01-01

    The first EHV composite cross-arms have been used since late 1990's in Switzerland. It was the first step to the compaction of towers sizes. Since then, significant advances have been made in composite cross-arms technology while the lattice construction technique has not been seriously challenged...... of EHV composite cross-arms and lightning protection methods are reviewed based on the state of the art review and subsequently some solutions are presented to overcome the two main challenges....

  17. The emancipatory character of action research, its history and the present state of the art

    NARCIS (Netherlands)

    Boog, B.

    2003-01-01

    Right from the start. action research was intended to be emancipatory research, and it still is. This article will underpin this by outlining its history and the present state of the art. Though a variety of action research approaches have developed along divergent theoretical pathways, it will be

  18. State-of-the-Art: Research Theoretical Framework of Information Systems Implementation Research in the Health Sector in Sub-Saharan Africa

    DEFF Research Database (Denmark)

    Tetteh, Godwin Kofi

    2014-01-01

    This study is about the state-of-the-art of reference theories and theoretical framework of information systems implementation research in the health industry in the Sub-Saharan countries from a process perspective. A process – variance framework, Poole et al, (2000), Markus & Robey, (1988......) and Shaw & Jarvenpaa, (1997) is employed to examine reference theories employed in research conducted on information systems implementation in the health sector in the Sub-Saharan region and published between 2003 and 2013. Using a number of key words and searching on a number of databases, EBSCO, CSA...... the process theoretical framework to enhance our insight into successful information systems implementation in the region. It is our optimism that the process based theoretical framework will be useful for, information system practitioners and organisational managers and researchers in the health sector...

  19. Meniscal Allograft Transplantation: State of the Art.

    Science.gov (United States)

    Trentacosta, Natasha; Graham, William C; Gersoff, Wayne K

    2016-06-01

    Meniscal allograft transplantation has evolved over the years to provide a state-of-the-art technique for the sports medicine surgeon to utilize in preserving contact mechanics and function of the knee in irreparable meniscal pathology. However, this procedure continues to spark considerable debate on proper tissue processing techniques, acceptable indications, methods of implantation, and potential long-term outcomes.

  20. State-of-the-Art Pediatric Hypnosis Training: Remodeling Curriculum and Refining Faculty Development.

    Science.gov (United States)

    Kohen, Daniel P; Kaiser, Pamela; Olness, Karen

    2017-01-01

    Training in pediatric hypnosis has been part of clinical hypnosis education in the United States since 1976. Workshops expanded over time and are now taught by highly experienced pediatric clinicians across the globe. In 1987, a small vanguard of North American faculty, academic pediatricians, and pediatric psychologists taught a 3-day pediatric hypnosis workshop at the national meeting of the Society for Developmental and Behavioral Pediatrics (SDBP). This model of annual tri-level concurrent workshops (introductory, intermediate, and advanced) was sponsored by the SDBP for 24 years. In 2009, the National Pediatric Hypnosis Training Institute (NPHTI) assembled, and in 2010, offered its first annual workshops. This article documents this history of pediatric hypnosis education and describes NPHTI's remodeling and ongoing refinement toward a state-of-the-art curriculum with innovative methodology based upon (1) current research about adult experiential and small group learning; (2) design principles for presentations that maximize adult learning and memory; and (3) evaluations by participants and faculty. These underpinnings-including clinical training videos, individualized learning choices, emphasis on personalized, goal-oriented sessions, and advances in faculty selection, and ongoing development-are applicable to adult training models. Integration of developmental and self-regulation strategies may be more unique to pediatric hypnosis skills training programs. The conclusion proposes expansion of pediatric hypnosis education and elimination of related barriers toward goals that all children learn self-hypnosis (SH) for mind-body health.

  1. State-of-the-art and problems of X-ray diffraction analysis of biomacromolecules

    International Nuclear Information System (INIS)

    Andreeva, N. S.

    2006-01-01

    The state-of-the-art of X-ray diffraction studies of biomacromolecules is briefly characterized, and the challenge imposed by science is discussed. These studies are characterized by a wide scope and extensive use. This field of science is of great interest and is developed in many countries. The main purpose is to solve practical problems in medicine consisting in the design of drugs against various diseases. X-ray diffraction analysis of enzymes brought the pharmaceutical industry to a new level, thus allowing the rational design of drugs against formerly untreatable diseases. Modern X-ray diffraction studies of biomacromolecules laid the basis for a new science called structural biology. This method allows one to solve fundamental problems of physical chemistry for a new state of matter existing in living systems. Here, science poses numerous problems in analysis of X-ray diffraction data on biological macromolecules. Many of theses problems are in their infancy

  2. The Development of Innovation Systems as an Object with the State Regulation

    Directory of Open Access Journals (Sweden)

    Melnyk Alexander G.

    2017-09-01

    Full Text Available The article examines the processes of structuring the environment for the development of innovation systems in terms of the formation of a State regulated object. A methodological approach to definition of the State regulation at the primary, secondary and tertiary levels of structuring the environment of innovation systems has been suggested, based on the premise of the objective nature of the integration of social environment and market mechanisms into the structure of an object with the State regulation for the development of innovation systems. The definition of innovative systems as an object with the State regulation in terms of structural-organizational and functional areas of their expansion has been presented. A model for the progressive extension of the State regulated object by means of the development of innovation systems at the primary, secondary and tertiary levels of the structuring of environment in the process of formation of the institutional and technological structures of innovation systems has been proposed.

  3. A State-of-the-Art Survey of Indoor Positioning and Navigation Systems and Technologies

    Directory of Open Access Journals (Sweden)

    Wilson Sakpere

    2017-12-01

    Full Text Available The research and use of positioning and navigation technologies outdoors has seen a steady and exponential growth. Based on this success, there have been attempts to implement these technologies indoors, leading to numerous studies. Most of the algorithms, techniques and technologies used have been implemented outdoors. However, how they fare indoors is different altogether. Thus, several technologies have been proposed and implemented to improve positioning and navigation indoors. Among them are Infrared (IR, Ultrasound, Audible Sound, Magnetic, Optical and Vision, Radio Frequency (RF, Visible Light, Pedestrian Dead Reckoning (PDR/Inertial Navigation System (INS and Hybrid. The RF technologies include Bluetooth, Ultra-wideband (UWB, Wireless Sensor Network (WSN, Wireless Local Area Network (WLAN, Radio-Frequency Identification (RFID and Near Field Communication (NFC. In addition, positioning techniques applied in indoor positioning systems include the signal properties and positioning algorithms. The prevalent signal properties are Angle of Arrival (AOA, Time of Arrival (TOA, Time Difference of Arrival (TDOA and Received Signal Strength Indication (RSSI, while the positioning algorithms are Triangulation, Trilateration, Proximity and Scene Analysis/ Fingerprinting. This paper presents a state-of-the-art survey of indoor positioning and navigation systems and technologies, and their use in various scenarios. It analyses distinct positioning technology metrics such as accuracy, complexity, cost, privacy, scalability and usability. This paper has profound implications for future studies of positioning and navigation.

  4. [State of the art diagnostic criteria of severe periodontitis].

    Science.gov (United States)

    Ouyang, X Y

    2017-02-09

    Periodontitis could be categorized as mild, moderate, and severe according to the severity of the disease. This categorizing system could also be used together with other classification systems. The present article introduced the status about the case definition of severe periodontitis, including the standard of case definitions for surveillance of periodontitis reported by the Centers for Disease Control and Prevention (CDC) in partnership with the American Academy of Periodontology (AAP) and the consensus report on the definition of periodontitis case for use in risk factor research by Europe workshop. A consensus on the state of the art definition of severe periodontitis for use in clinical work was gained base on the expertise of Chinese Society of Periodontology, Chinese Association of Stomatology. The background of this consensus and the significance of the criteria for the case definition were discussed.

  5. The state-of-the-art port of entry workshop

    Energy Technology Data Exchange (ETDEWEB)

    Godfrey, B.

    1995-05-01

    The increased demand for freight movements through international ports of entry and the signing of the North American Free Trade Agreement (NAFTA) have increased freight traffic at border ports of entry. The State-of-the-Art Port of Entry Workshop initiated a dialogue among technologists and stakeholders to explore the potential uses of technology at border crossings and to set development priorities. International ports of entry are both information and labor intensive, and there are many promising technologies that could be used to provide timely information and optimize inspection resources. Participants universally held that integration of technologies and operations is critical to improving port services. A series of Next Steps was developed to address stakeholder issues and national priorities, such as the National Transportation Policy and National Drug Policy. This report documents the views of the various stakeholders and technologists present at the workshop and outlines future directions of study.

  6. Ten years optically pumped semiconductor lasers: review, state-of-the-art, and future developments

    Science.gov (United States)

    Kannengiesser, Christian; Ostroumov, Vasiliy; Pfeufer, Volker; Seelert, Wolf; Simon, Christoph; von Elm, Rüdiger; Zuck, Andreas

    2010-02-01

    Optically Pumped Semiconductor Lasers - OPSLs - have been introduced in 2001. Their unique features such as power scalability and wavelength flexibility, their excellent beam parameters, power stability and reliability opened this pioneering technology access to a wide range of applications such as flow cytometry, confocal microscopy, sequencing, medical diagnosis and therapy, semiconductor inspection, graphic arts, forensic, metrology. This talk will introduce the OPSL principles and compare them with ion, diode and standard solid state lasers. It will revue the first 10 years of this exciting technology, its current state and trends. In particular currently accessible wavelengths and power ranges, frequency doubling, ultra-narrow linewidth possibilities will be discussed. A survey of key applications will be given.

  7. State-of-the-art report for the instrumentation and control technology based on the nuclear-information technology convergence

    International Nuclear Information System (INIS)

    Kwon, Kee Choon; Kim, Chang Hwoi; Lee, Dong Young; Lee, Cheol Kwon; Lee, Hyun Chul

    2011-12-01

    As digitalized the instrumentation and control systems in nuclear power plants, in the past that were implemented in an analog system or circuit for monitoring, control and protection, most of the them is implemented in embedded software based on hardware platform. Digital instrumentation and control system hardware platforms and a digital safety systems have developed in Korea. The fundamental technology of the software part of MMIS (Man-Machine Interface System) has achieved the localization. But in order to secure our global competitiveness, in the -based software, the source of the content areas / It is needed to develop core technologies of the software and contents areas based on the nuclear-IT convergence technology. In this report, the IT technology centered for the characteristics of embedded software applied to nuclear power is described. Also state-of-the-art IT technologies that will converge to nuclear power plants are mentioned

  8. State of the art and prospects for the future of nuclear-medical in-vitro diagnostics

    International Nuclear Information System (INIS)

    Boettger, I.

    1984-01-01

    Following a bried outline of the history of the radioimmunoassay, the current state of the art and the range of application of RIAs in clinical routine examinations are summarized. The recently developed ''non-isotopic immunoassays'' (NIIA) are compared with the more conventional RIA techniques, their range of application is discussed, and an outlook is given on future developments. (MG) [de

  9. State of the art of solid state dosimetry

    International Nuclear Information System (INIS)

    Souza, Susana O.; Yamamoto, Takayoshi; D'Errico, Francesco

    2014-01-01

    Passive solid-state detectors still dominate the personal dosimetry field. This article provides state of the art in this field and summarizes the most recent works presented on TL, OSL and RPL during the 17th International Conference on Solid State Dosimetry held in Recife in September 2013. The Article contains in particular the techniques Thermoluminescence (TL), Optically Stimulated Luminescence (OSL), radio photoluminescence (RPL). Thermoluminescence has the biggest advantage of the wide availability of commercial materials for dosimetry, and the nature tissue-equivalent of several of these materials. The limitation of the TL dosimetry presents fading luminance signal and the need for high temperatures to obtain the signal. The Optically Stimulated Luminescence has the advantages of high sensitivity, the possibility of multiple reading, while its limit is the need to use response compensating filters in addition to the high cost of equipment and dosimeters still restricted very few options trading . The radio photoluminescence has a reading that is completely non-destructive, but their dosimeters present lack of tissue-equivalent and a high cost. Presents the details of the techniques and the advantages and limitations of each of these will be discussed

  10. State-of-the-art of liquid waste disposal for geothermal energy systems: 1979. Report PNL-2404

    Energy Technology Data Exchange (ETDEWEB)

    Defferding, L.J.

    1980-06-01

    The state-of-the-art of geothermal liquid waste disposal is reviewed and surface and subsurface disposal methods are evaluated with respect to technical, economic, legal, and environmental factors. Three disposal techniques are currently in use at numerous geothermal sites around the world: direct discharge into surface waters; deep-well injection; and ponding for evaporation. The review shows that effluents are directly discharged into surface waters at Wairakei, New Zealand; Larderello, Italy; and Ahuachapan, El Salvador. Ponding for evaporation is employed at Cerro Prieto, Mexico. Deep-well injection is being practiced at Larderello; Ahuachapan; Otake and Hatchobaru, Japan; and at The Geysers in California. All sites except Ahuachapan (which is injecting only 30% of total plant flow) have reported difficulties with their systems. Disposal techniques used in related industries are also reviewed. The oil industry's efforts at disposal of large quantities of liquid effluents have been quite successful as long as the effluents have been treated prior to injection. This study has determined that seven liquid disposal methods - four surface and three subsurface - are viable options for use in the geothermal energy industry. However, additional research and development is needed to reduce the uncertainties and to minimize the adverse environmental impacts of disposal. (MHR)

  11. State of the art on power performance assessments for wind energy conversion systems

    Energy Technology Data Exchange (ETDEWEB)

    Maribo Pedersen, B. [ed.

    1997-12-31

    It is the intention of this meeting to clarify the status of power performance verification and assessment and identify the future needs in terms of applications, research fields and standardization actions, putting emphasis on the following items: Power performance verification for wind farms; Power performance verification for large wind turbines; Power performance verification for wind turbines operating in complex terrain; Assessment of the available international and national standards; Assessment of developed, applied and verified tools for WECS power performance. This Experts Meeting had gathered 14 participants from 6 different countries. 12 presentations were given and although countries with a sizeable wind program, ie. Italy, UK and Spain were not present, it is felt that the meeting gave a fair impression of the contemporary state of the art world wide. Specific problems concerning accurate definition and measurement of wind speed by cup-anemometers were dealt with. Different sources of errors were analysed and valuable new experimental results were presented. Other instruments for wind-speed measurements than cup-anemometers were discussed as well. (EG)

  12. Modeling surface topography of state-of-the-art x-ray mirrors as a result of stochastic polishing process: recent developments

    Science.gov (United States)

    Yashchuk, Valeriy V.; Centers, Gary; Tyurin, Yuri N.; Tyurina, Anastasia

    2016-09-01

    Recently, an original method for the statistical modeling of surface topography of state-of-the-art mirrors for usage in xray optical systems at light source facilities and for astronomical telescopes [Opt. Eng. 51(4), 046501, 2012; ibid. 53(8), 084102 (2014); and ibid. 55(7), 074106 (2016)] has been developed. In modeling, the mirror surface topography is considered to be a result of a stationary uniform stochastic polishing process and the best fit time-invariant linear filter (TILF) that optimally parameterizes, with limited number of parameters, the polishing process is determined. The TILF model allows the surface slope profile of an optic with a newly desired specification to be reliably forecast before fabrication. With the forecast data, representative numerical evaluations of expected performance of the prospective mirrors in optical systems under development become possible [Opt. Eng., 54(2), 025108 (2015)]. Here, we suggest and demonstrate an analytical approach for accounting the imperfections of the used metrology instruments, which are described by the instrumental point spread function, in the TILF modeling. The efficacy of the approach is demonstrated with numerical simulations for correction of measurements performed with an autocollimator based surface slope profiler. Besides solving this major metrological problem, the results of the present work open an avenue for developing analytical and computational tools for stitching data in the statistical domain, obtained using multiple metrology instruments measuring significantly different bandwidths of spatial wavelengths.

  13. Home Energy Systems: the State of the Art

    NARCIS (Netherlands)

    van de Kaa, G.; Ligtvoet, A.; Fens, T.W.; Herder, P.M.

    2014-01-01

    Smart home energy systems are technically possible to realize but are not yet applied on a large scale partly due to the fact that no common standards exist that enable interconnection of components that make up these smart energy systems. Multiple standards have been developed which are competing

  14. State of the art in cosmology

    International Nuclear Information System (INIS)

    Zel'dovich, Ya.B.

    1983-01-01

    The present state of the art in cosmology is under discussion. The general picture of the Universe evolution is presented, and its main stages are outlined. The prooess of formation of the large scale Universe structure is considered. The possibility of investigation into the ''inflation'' period of the ''very-very early Universe'' from the view point of theoretical physics is sown. It is noted that cosmology will become a complete science only when physics gives an exhaustive answer to all issues raised by cosmology

  15. ARV robotic technologies (ART): a risk reduction effort for future unmanned systems

    Science.gov (United States)

    Jaster, Jeffrey F.

    2006-05-01

    The Army's ARV (Armed Robotic Vehicle) Robotic Technologies (ART) program is working on the development of various technological thrusts for use in the robotic forces of the future. The ART program will develop, integrate and demonstrate the technology required to advance the maneuver technologies (i.e., perception, mobility, tactical behaviors) and increase the survivability of unmanned platforms for the future force while focusing on reducing the soldiers' burden by providing an increase in vehicle autonomy coinciding with a decrease in the total number user interventions required to control the unmanned assets. This program will advance the state of the art in perception technologies to provide the unmanned platform an increasingly accurate view of the terrain that surrounds it; while developing tactical/mission behavior technologies to provide the Unmanned Ground Vehicle (UGV) the capability to maneuver tactically, in conjunction with the manned systems in an autonomous mode. The ART testbed will be integrated with the advanced technology software and associated hardware developed under this effort, and incorporate appropriate mission modules (e.g. RSTA sensors, MILES, etc.) to support Warfighter experiments and evaluations (virtual and field) in a military significant environment (open/rolling and complex/urban terrain). The outcome of these experiments as well as other lessons learned through out the program life cycle will be used to reduce the current risks that are identified for the future UGV systems that will be developed under the Future Combat Systems (FCS) program, including the early integration of an FCS-like autonomous navigation system onto a tracked skid steer platform.

  16. Aircraft wake vortices : a state-of-the-art review of the United States R&D program

    Science.gov (United States)

    1977-02-28

    The report summarizes the current state-of-the-art understanding : of the aircraft wake vortex phenomenon and the results of the United : States program to minimize the restrictions caused by aircraft wake : vortices in the terminal environment. The ...

  17. The function and the structural characteristics of the state-of-the-art concept in the provisions for damage required under the Atomic Energy Act

    International Nuclear Information System (INIS)

    Obenhaus, W.; Kuckuck, B.

    1980-01-01

    The authors examine the function and the structural characteristcs of the state-of-the-art concept. It is described as a yardstick in judging the means to be employed to attain the goals of protection under Sec. 1, Subsec. 2 of the Atomic Energy Act. The concept was used to ensure that the advances in theoretical knowledge were met also by an adequate development of technical measures of protection so as to ensure a maximum of safety. The concept included a scientific and engineering state of the art, which allowed a sufficiently reliable forecast to be made of the technical feasibility of science-based concepts of safety and protection. The forecast constituted an obligation to monitor the progress of the state of the art by elucidating progressive developments in safety proposals and concerns. (HSCH) [de

  18. State of the Art of HVAC Technology in Europe and America

    DEFF Research Database (Denmark)

    Olesen, Bjarne W.; Kazanci, Ongun Berk

    2015-01-01

    of energy sources and energy generators are very much similar. This paper will present state-of the art-off energy efficient systems that will provide a good indoor environmental quality at a decreased energy use. Low Temperature Heating and High Temperature Cooling systems are an important requirement...... mechanisms and media to emit and remove heat or moisture from indoor spaces (e.g. hydronic radiant heating and cooling systems, fan-coil units, and active beams). The main differences between HVAC systems in Europe, North America and other parts of the world are often the indoor terminal units. Type...... for increasing the energy efficiency of HVAC (heating, ventilation and air-conditioning) systems and for increasing the amount of renewable energy used. Especially these types of systems are getting increasing attention in Europe and North-America. In the present study, operation characteristics, possibilities...

  19. Risk monitors - The State of the Art in their Development and Use at Nuclear Power Plants - Produced on behalf of IAEA and OECD/NEA WGRisk

    International Nuclear Information System (INIS)

    Shepherd, C.H.; Yllera, F.J.; Kaufer, B.; Henneke, D.W.; Gaynor, D.; Sedlak, J.; Evans, M.G.K.; Boneham, P.; Horne, B.; Guymer, P.; Hatfield, M.; Hewitt, J.; Shanley, L.; Sorman, J.; Chao, C.C.; Pullen, R.; Reinhart, F.M.; Lantaron, A.; Huerta, A.; Vojnovic, D.; Hollo, E.; Fukuda, M.; De Gelder, P.; Schulz, R.; Lanore, J.M.

    2004-01-01

    This report provides a description of the state-of-the-art in the development and use of Risk Monitors at nuclear power plants in the Member States. The work has been carried out jointly by IAEA and OECD WGRisk. The information presented in this report has been obtained from three questionnaires on the development and use of Risk Monitors, software and Regulatory perspectives; from OECD and IAEA Workshops on Risk Monitors; and from IAEA consultants meetings and WGRisk Task Group meetings. Some of the work carried out to produce the report has been funded by the United Kingdom Nuclear Installations Inspectorate. The aim is to produce a report that describes the state of the art in the development of Risk Monitors and their use at nuclear power plants. This will: - define the terminology that relates to Risk Monitors as used in this report, - describe the state of the art in the development and use of Risk Monitors at nuclear power plants, and indicate future developments, - provide information on the software packages available for Risk Monitors, - identify the issues that need to be addressed in the development of a Living PSA for use in a Risk Monitor application and give guidance on how these issues can be resolved, - give information on the issues relating to the design of the Risk Monitor operator interface so that it gives a tool that can be used by all station staff, - discuss the issues that relate to the qualitative and quantitative risk measures addressed by Risk Monitors such as the definition of the Operational Safety Criteria which define the risk levels, the calculation of the Allowed Configuration Time and the definition of the qualitative risk levels that relate to the availability of safety systems, - give insights into the costs involved, the benefits that can be obtained from Risk Monitors and their limitations, and - discuss the regulatory perspective on the use of Risk Monitors to provide risk information that can be used during nuclear power

  20. The Munsell Color System: a scientific compromise from the world of art.

    Science.gov (United States)

    Cochrane, Sally

    2014-09-01

    Color systems make accurate color specification and matching possible in science, art, and industry by defining a coordinate system for all possible color perceptions. The Munsell Color System, developed by the artist Albert Henry Munsell in the early twentieth century, has influenced color science to this day. I trace the development of the Munsell Color System from its origins in the art world to its acceptance in the scientific community. Munsell's system was the first to accurately and quantitatively describe the psychological experience of color. By considering the problems that color posed for Munsell's art community and examining his diaries and published material, I conclude that Munsell arrived at his results by remaining agnostic as to the scientific definition of color, while retaining faith that color perceptions could be objectively quantified. I argue that Munsell was able to interest the scientific community in his work because color had become a controversial topic between physicists and psychologists. Parts of Munsell's system appealed to each field, making it a workable compromise. For contrast, I suggest that three contemporary scientists with whom Munsell had contact--Wilhelm Ostwald, Ogden Rood, and Edward Titchener--did not reach the same conclusions in their color systems because they started from scientific assumptions about the nature of color.

  1. State-of-the-art review of sodium fire analysis and current notions for improvements

    International Nuclear Information System (INIS)

    Tasi, S.S.

    1978-01-01

    Sodium releases from postulated pipe ruptures, as well as failures of sodium handling equipment in liquid metal fast breeder reactors, may lead to substantial pressure-temperature transients in the sodium system cells, as well as in the reactor containment building. Sodium fire analyses are currently performed with analytical tools, such as the SPRAY, SOMIX, SPOOL-FIRE and SOFIRE-II codes. A review and evaluation of the state-of-the-art in sodium fire analysis is presented, and suggestions for further improvements are made. This work is based, in part, on studies made at Brookhaven National Laboratory during the past several years in the areas of model development and improvement associated with the accident analyses of LMFBRs

  2. As pesquisas denominadas "estado da arte" Research called "state of the art"

    Directory of Open Access Journals (Sweden)

    Norma Sandra de Almeida Ferreira

    2002-08-01

    Full Text Available Nos últimos quinze anos, no Brasil e em outros países, tem se produzido um conjunto significativo de pesquisas conhecidas pela denominação "estado da arte" ou "estado do conhecimento". Definidas como de caráter bibliográfico, elas parecem trazer em comum o desafio de mapear e de discutir uma certa produção acadêmica em diferentes campos do conhecimento, tentando responder que aspectos e dimensões vêm sendo destacados e privilegiados em diferentes épocas e lugares, de que formas e em que condições têm sido produzidas certas dissertações de mestrado, teses de doutorado, publicações em periódicos e comunicações em anais de congressos e de seminários. Neste artigo levanto e tento responder as seguintes questões: seria possível fazer um esforço de interrogar a história a produção acadêmica sobre determinada área do conhecimento, optando por ler apenas dados bibliográficos e resumos dos trabalhos? O que significa ler esse lugar (catálogos, instituição de divulgação dos trabalhos, tomando-o como fonte documental para um mapeamento da produção acadêmica, em pesquisas denominadas "estado da arte"?These last fifteen years, Brazil and other countries have seen the production of a significant set of research, known as "state of the art" or "state of knowledge". Defined as having a bibliographic feature, they seem to share the challenge of mapping and discussing a certain academic production in different fields of knowledge. They try to show which aspects and dimensions have been highlighted and privileged at different times and places. They also pinpoint how and in what conditions certain kinds of master's degree thesis and doctor's degree dissertations, publications in periodicals and communications in annals of congress and seminary were produced. In this article, I pose and try to answer the following questions: Is it worth making the effort of interrogating the history of the academic production about a given area

  3. How the Arts Develop the Young Brain

    Science.gov (United States)

    Sousa, David A.

    2006-01-01

    The arts play an important role in human development, enhancing the growth of cognitive, emotional, and psychomotor pathways. Neuroscience research reveals the impressive impact of arts instruction, such as, music, drawing and physical activity, on students' cognitive, social and emotional development. Much of what young children do as…

  4. The fifth generation computer project state of the art report 111

    CERN Document Server

    Scarrott

    1983-01-01

    The Fifth Generation Computer Project is a two-part book consisting of the invited papers and the analysis. The invited papers examine various aspects of The Fifth Generation Computer Project. The analysis part assesses the major advances of the Fifth Generation Computer Project and provides a balanced analysis of the state of the art in The Fifth Generation. This part provides a balanced and comprehensive view of the development in Fifth Generation Computer technology. The Bibliography compiles the most important published material on the subject of The Fifth Generation.

  5. Multimodality imaging and state-of-art GPU technology in discriminating benign from malignant breast lesions on real time decision support system

    International Nuclear Information System (INIS)

    Kostopoulos, S; Glotsos, D; Kalatzis, I; Asvestas, P; Cavouras, D; Sidiropoulos, K; Dimitropoulos, N

    2014-01-01

    The aim of this study was to design a pattern recognition system for assisting the diagnosis of breast lesions, using image information from Ultrasound (US) and Digital Mammography (DM) imaging modalities. State-of-art computer technology was employed based on commercial Graphics Processing Unit (GPU) cards and parallel programming. An experienced radiologist outlined breast lesions on both US and DM images from 59 patients employing a custom designed computer software application. Textural features were extracted from each lesion and were used to design the pattern recognition system. Several classifiers were tested for highest performance in discriminating benign from malignant lesions. Classifiers were also combined into ensemble schemes for further improvement of the system's classification accuracy. Following the pattern recognition system optimization, the final system was designed employing the Probabilistic Neural Network classifier (PNN) on the GPU card (GeForce 580GTX) using CUDA programming framework and C++ programming language. The use of such state-of-art technology renders the system capable of redesigning itself on site once additional verified US and DM data are collected. Mixture of US and DM features optimized performance with over 90% accuracy in correctly classifying the lesions

  6. Fine pitch thermosonic wire bonding: analysis of state-of-the-art manufacturing capability

    Science.gov (United States)

    Cavasin, Daniel

    1995-09-01

    A comprehensive process characterization was performed at the Motorola plastic package assembly site in Selangor, Malaysia, to document the current fine pitch wire bond process capability, using state-of-the-art equipment, in an actual manufacturing environment. Two machines, representing the latest technology from two separate manufacturers, were operated one shift per day for five days, bonding a 132 lead Plastic Quad Flat Pack. Using a test device specifically designed for fine pitch wire bonding, the bonding programs were alternated between 107 micrometers and 92 micrometers pad pitch, running each pitch for a total of 1600 units per machine. Wire, capillary type, and related materials were standardized and commercially available. A video metrology measurement system, with a demonstrated six sigma repeatability band width of 0.51 micrometers , was utilized to measure the bonded units for bond dimensions and placement. Standard Quality Assurance (QA) metrics were also performed. Results indicate that state-of-the-art thermosonic wire bonding can achieve acceptable assembly yields at these fine pad pitches.

  7. State-of-the-art explosion protection for dedusting of coal grinding plants; Explosionsschutz fuer die Entstaubung von Kohlemahlanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Neuhaus, Tim [Intensiv-Filter GmbH und Co. KG, Velbert-Langenberg (Germany). Development; Schrooten, Theo [Intensiv-Filter GmbH und Co. KG, Velbert-Langenberg (Germany). Technology Dept.; Baldauf, Joerg [Thorwesten Vent GmbH, Beckum (Germany). Sales

    2010-07-01

    With dedusting of coal grinding plants, the state of the technology is determined by the explosion protection measures, the filtration performance and the design of the plant. To ensure safe operation of a plant, only certified and tested concepts and components should be used for its design and manufacture. With plants protected against explosion, such issues will always affect the plant's resistance, its explosion relief venting and its explosion decoupling systems. Economic factors, where the aim is minimising the filter level and lean design, should not be forgotten with dedusting and it is important that plants are aligned to the latest state of technological development. With their years of experience and continuing development in the area of dedusting for coal grinding plants, Intensiv-Filter and Thorwesten Vent have succeeded in implementing the state of the art. (orig.)

  8. Web mining in soft computing framework: relevance, state of the art and future directions.

    Science.gov (United States)

    Pal, S K; Talwar, V; Mitra, P

    2002-01-01

    The paper summarizes the different characteristics of Web data, the basic components of Web mining and its different types, and the current state of the art. The reason for considering Web mining, a separate field from data mining, is explained. The limitations of some of the existing Web mining methods and tools are enunciated, and the significance of soft computing (comprising fuzzy logic (FL), artificial neural networks (ANNs), genetic algorithms (GAs), and rough sets (RSs) are highlighted. A survey of the existing literature on "soft Web mining" is provided along with the commercially available systems. The prospective areas of Web mining where the application of soft computing needs immediate attention are outlined with justification. Scope for future research in developing "soft Web mining" systems is explained. An extensive bibliography is also provided.

  9. Antiphospholipid Syndrome during pregnancy: the state of the art

    Science.gov (United States)

    Di Prima, Fosca A. F.; Valenti, Oriana; Hyseni, Entela; Giorgio, Elsa; Faraci, Marianna; Renda, Eliana; De Domenico, Roberta; Monte, Santo

    2011-01-01

    Obstetric complications are the hallmark of antiphospholipid syndrome. Recurrent miscarriage, early delivery, oligohydramnios, prematurity, intrauterine growth restriction, fetal distress, fetal or neonatal thrombosis, pre-eclampsia/eclampsia, HELLP syndrome, arterial or venous thrombosis and placental insufficiency are the most severe APS-related complication for pregnant women. Antiphospholipid antibodies promote activation of endothelial cells, monocytes and platelets, causing an overproduction of tissue factor and thromboxane A2. Complement activation might have a central pathogenetic role. These factors, associated with the typical changes in the hemostatic system during normal pregnancy, result in a hypercoagulable state. This is responsible of thrombosis that is presumed to provoke many of the pregnancy complications associated with APS. Obstetric care is based on combined medical-obstetric high-risk management and treatment with the association between aspirin and heparin. This review aims to deter- mine the current state of the art of APS by investigating the knowledge achievements of recent years, to provide the most appropriate diagnostic and therapeutic management for pregnant women suffering from this syndrome. PMID:22439075

  10. The job demands-resources model : state of the art

    NARCIS (Netherlands)

    Bakker, A.B.; Demerouti, E.

    2007-01-01

    Purpose - The purpose of this paper is to give a state-of-the art overview of the Job Demands-Resources (JD-R) model Design/methodology/approach - The strengths and weaknesses of the demand-control model and the effort-reward imbalance model regarding their predictive value for employee well being

  11. Catalytic Reforming of Oxygenates: State of the Art and Future Prospects.

    Science.gov (United States)

    Li, Di; Li, Xinyu; Gong, Jinlong

    2016-10-12

    This Review describes recent advances in the design, synthesis, reactivity, selectivity, structural, and electronic properties of the catalysts for reforming of a variety of oxygenates (e.g., from simple monoalcohols to higher polyols, then to sugars, phenols, and finally complicated mixtures like bio-oil). A comprehensive exploration of the structure-activity relationship in catalytic reforming of oxygenates is carried out, assisted by state-of-the-art characterization techniques and computational tools. Critical emphasis has been given on the mechanisms of these heterogeneous-catalyzed reactions and especially on the nature of the active catalytic sites and reaction pathways. Similarities and differences (reaction mechanisms, design and synthesis of catalysts, as well as catalytic systems) in the reforming process of these oxygenates will also be discussed. A critical overview is then provided regarding the challenges and opportunities for research in this area with a focus on the roles that systems of heterogeneous catalysis, reaction engineering, and materials science can play in the near future. This Review aims to present insights into the intrinsic mechanism involved in catalytic reforming and provides guidance to the development of novel catalysts and processes for the efficient utilization of oxygenates for energy and environmental purposes.

  12. Research on the development of high-level martial-art teams of universities in Shanghai

    Directory of Open Access Journals (Sweden)

    MING Lei

    2014-06-01

    Full Text Available Five Universities with high level martial art sport teams in Shanghai have been chosen for research to initiate a comprehensive investigation and analysis for following aspects during establishment and development of the martial-art teams: status of athletes and coachers, status of learning and training of martial-art teams, martial-art team stimulating system and logistic support by using documentary, questionnaire survey, interview and mathematic survey, so as to find existing disadvantages and their relevant solutions.

  13. Global Software Development: A Review of the State-Of-The-Art (2007-2011)

    DEFF Research Database (Denmark)

    Ali Babar, Muhammad; Zahedi, Mansooreh

    a state-of-the-art review of the GSD research literature published in the main venue of Global Software Engineering in order to identify the main research trends and gaps that needs to be filled by future research. We were also interested placing the findings of our review with respect to a practice......-driven GSD research agenda. Method: We used structured literature review methodology for which we decided to select and review the recently published research papers (i.e., 2007 - 2011) from the International Conference in Global Software Engineering (ICGSE). We used a framework for organizing GSD research...... challenges and threats and a practice-driven research agenda for extracting and organizing the data from the reviewed papers. We used theoretical reasoning for classifying the reviewed papers under different categories, which were mainly based on the framework, a decision that also enabled us to propose...

  14. State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies

    DEFF Research Database (Denmark)

    Hofstätter, Thomas; Pedersen, David Bue; Tosello, Guido

    2017-01-01

    Additive manufacturing technologies have received a lot of attention in recent years for their use in multiple materials such as metals, ceramics, and polymers. The aim of this review article is to analyze the technology of fiber-reinforced polymers and its implementation with additive...... manufacturing. This article reviews recent developments, ideas, and state-of-the-art technologies in this field. Moreover, it gives an overview of the materials currently available for fiber-reinforced material technology....

  15. Computerised Decision Support Systems for the management of freshwater radioecological emergencies: assessment of the state-of-the-art with respect to the experiences and needs of end-users

    International Nuclear Information System (INIS)

    Hofman, D.; Monte, L.; Boyer, P.; Brittain, J.; Donchyts, G.; Gallego, E.; Gheorghiu, D.; Hakanson, L.; Heling, R.; Kerekes, A.; Kocsy, G.; Lepicard, S.; Slavik, O.; Slavnicu, D.; Smith, J.; Zheleznyak, M.

    2011-01-01

    Assessment of the environmental and radiological consequences of a nuclear accident requires the management of a great deal of data and information as well as the use of predictive models. Computerised Decision Support Systems (CDSS) are essential tools for this kind of complex assessment and for assisting experts with a rational decision process. The present work focuses on the assessment of the main features of selected state-of-the-art CDSS for off-site management of freshwater ecosystems contaminated by radionuclides. This study involved both developers and end-users of the assessed CDSS and was based on practical customisation exercises, installation and application of the decision systems. Potential end-users can benefit from the availability of several ready-to-use CDSS that allow one to run different kinds of models aimed at predicting the behaviour of radionuclides in aquatic ecosystems, evaluating doses to humans, assessing the effectiveness of different kinds of environmental management interventions and ranking these interventions, accounting for their social, economic and environmental impacts. As a result of the present assessment, the importance of CDSS 'integration' became apparent: in many circumstances, different CDSS can be used as complementary tools for the decision-making process. The results of this assessment can also be useful for the future development and improvement of the CDSS. - Research highlights: →The present work focuses on the assessment of the main features of selected state-of-the-art CDSS for the off-site management of freshwater ecosystems contaminated by radionuclides. →Potential end-users can benefit from a number of complementary open, freely-available and ready-to-use CDSS based on validated environmental models aimed at predicting the migration of radionuclides in the aquatic environment, evaluating the doses to man, assessing the effectiveness of different environmental feasible restoration strategies and

  16. Glucocorticoids at the Olympic Games: state-of-the-art review.

    Science.gov (United States)

    Fitch, Ken

    2016-10-01

    In this state-of-the-art review, the author discusses the history of prohibiting glucocorticoids (GCs) and how this has occurred over nearly three decades at the Olympic Games. He relates how prohibiting systemic GCs in sport was a major factor in the development of therapeutic use exemptions and the fluctuating status of non-systemic GCs (banned, not banned). Concern is expressed that for 2017, the World Anti-Doping Agency (WADA) is proposing to prohibit injecting GCs shortly prior to competition. The author notes that in 1986, when GCs were first prohibited, analytical chemistry techniques could not distinguish the route of GC administration from its urinary concentration. Thirty years later, this remains the case. Importantly, this article discusses how the desired pharmacological effects of injecting GCs locally and intra-articularly can be achieved and why exercising vigorously immediately or shortly after a GC injection is therapeutically unsound. The review concludes by agreeing that injecting GCs shortly prior to strenuous training or competition is medically unwise but stresses that this is a clinical matter that sport-not WADA-needs to address. Cycling and rowing have managed this successfully for the past 5 years. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  17. Continuous emission monitoring systems for power plants. The state-of-the-art

    International Nuclear Information System (INIS)

    Bamberger, J.A.

    1988-01-01

    Continuous monitoring of power plant emissions is performed to improve combustion and control equipment efficiency, and in response to various government agency requirements. This paper focuses upon recent developments in Continuous Emission Monitoring (CEM) and Systems (CEMS) for power plants. Topics presented include the perspective of the U.S. Environmental Protection Agency and the states: Continuous Monitoring of Power Plant Emissions - An EPA Perspective; Pennsylvania's Proposed Continuous Emission Monitoring System Data Telemetry Requirements for Municipal, Hospital and Infectious Waste Incinerators; the importance of quality assurance; Continuous Emission Monitoring and Quality Assurance Requirements for New Power Plants; Highlights of Pennsylvania's Continuous Emission Monitoring System Quality Assurance Program; improved system specifications and data acquisition methods; Improved Specifications for Continuous Emission Monitoring; A Microcomputer-Based Data Acquisition System for CEMS; CEMS applications; Expanded Use of CEMS in Acid Rain Control Programs: Opinions of Users, Control Agencies and Vendors; and an innovative measurement technique to assess electrostatic precipitator performance; The Assessment of Pulverized Coal Fly Ash Collection in Electrostatic Precipitators Using an Instrumental Assessment Technique

  18. State of art survey for design of medium frequency high power transformer

    DEFF Research Database (Denmark)

    Vaisambhayana, Sriram; Dincan, Catalin; Shuyu, Cao

    2016-01-01

    Medium and high frequency, high power transformers play an important role in footprint reduction along with their functions of galvanic isolation, and voltage transformation in all high power converters typically used in traction power systems, offshore wind plant power converters, and solid state...... transformer based distribution system grids. This state of art report analysis the various materials and design tradeoffs that govern the electromagnetic behavior and loss mechanisms of the medium frequency transformer applications. Typical winding and core geometries that have been reported extensively...

  19. The development of a classification schema for arts-based approaches to knowledge translation.

    Science.gov (United States)

    Archibald, Mandy M; Caine, Vera; Scott, Shannon D

    2014-10-01

    Arts-based approaches to knowledge translation are emerging as powerful interprofessional strategies with potential to facilitate evidence uptake, communication, knowledge, attitude, and behavior change across healthcare provider and consumer groups. These strategies are in the early stages of development. To date, no classification system for arts-based knowledge translation exists, which limits development and understandings of effectiveness in evidence syntheses. We developed a classification schema of arts-based knowledge translation strategies based on two mechanisms by which these approaches function: (a) the degree of precision in key message delivery, and (b) the degree of end-user participation. We demonstrate how this classification is necessary to explore how context, time, and location shape arts-based knowledge translation strategies. Classifying arts-based knowledge translation strategies according to their core attributes extends understandings of the appropriateness of these approaches for various healthcare settings and provider groups. The classification schema developed may enhance understanding of how, where, and for whom arts-based knowledge translation approaches are effective, and enable theorizing of essential knowledge translation constructs, such as the influence of context, time, and location on utilization strategies. The classification schema developed may encourage systematic inquiry into the effectiveness of these approaches in diverse interprofessional contexts. © 2014 Sigma Theta Tau International.

  20. A Review of Wireless Sensor Technologies and Applications in Agriculture and Food Industry: State of the Art and Current Trends

    OpenAIRE

    Ruiz-Garcia, Luis; Lunadei, Loredana; Barreiro, Pilar; Robla, Jose Ignacio

    2009-01-01

    The aim of the present paper is to review the technical and scientific state of the art of wireless sensor technologies and standards for wireless communications in the Agri- Food sector. These technologies are very promising in several fields such as environmental monitoring, precision agriculture, cold chain control or traceability. The paper focuses on WSN (Wireless Sensor Networks) and RFID (Radio Frequency Identification), presenting the different systems available, recent developments a...

  1. The development of an airborne information management system for flight test

    Science.gov (United States)

    Bever, Glenn A.

    1992-01-01

    An airborne information management system is being developed at the NASA Dryden Flight Research Facility. This system will improve the state of the art in management data acquisition on-board research aircraft. The design centers around highly distributable, high-speed microprocessors that allow data compression, digital filtering, and real-time analysis. This paper describes the areas of applicability, approach to developing the system, potential for trouble areas, and reasons for this development activity. System architecture (including the salient points of what makes it unique), design philosophy, and tradeoff issues are also discussed.

  2. 76 FR 9331 - Professional Development for Arts Educators Program; Office of Innovation and Improvement...

    Science.gov (United States)

    2011-02-17

    ... in elementary and secondary education for music, dance, drama, media arts, or visual arts, including... DEPARTMENT OF EDUCATION Professional Development for Arts Educators Program; Office of Innovation... education programs and to help ensure that all students meet challenging State academic content standards...

  3. Mathematical E-Learning: State of the Art and Experiences at the Open University of Catalonia

    Science.gov (United States)

    Juan, A.; Huertas, A.; Steegmann, C.; Corcoles, C.; Serrat, C.

    2008-01-01

    In this article we present a review of the state of the art in mathematical e-learning and some personal experiences on this area developed during the last eleven years at the Open University of Catalonia (UOC), a completely online university located in Spain. The article discusses important aspects related to online mathematics courses offered in…

  4. The geography of maternal and newborn health: the state of the art.

    Science.gov (United States)

    Ebener, Steeve; Guerra-Arias, Maria; Campbell, James; Tatem, Andrew J; Moran, Allisyn C; Amoako Johnson, Fiifi; Fogstad, Helga; Stenberg, Karin; Neal, Sarah; Bailey, Patricia; Porter, Reid; Matthews, Zoe

    2015-05-27

    As the deadline for the millennium development goals approaches, it has become clear that the goals linked to maternal and newborn health are the least likely to be achieved by 2015. It is therefore critical to ensure that all possible data, tools and methods are fully exploited to help address this gap. Among the methods that are under-used, mapping has always represented a powerful way to 'tell the story' of a health problem in an easily understood way. In addition to this, the advanced analytical methods and models now being embedded into Geographic Information Systems allow a more in-depth analysis of the causes behind adverse maternal and newborn health (MNH) outcomes. This paper examines the current state of the art in mapping the geography of MNH as a starting point to unleashing the potential of these under-used approaches. Using a rapid literature review and the description of the work currently in progress, this paper allows the identification of methods in use and describes a framework for methodological approaches to inform improved decision-making. The paper is aimed at health metrics and geography of health specialists, the MNH community, as well as policy-makers in developing countries and international donor agencies.

  5. Measuring the State-of-the-Art in Laser Cut Quality

    OpenAIRE

    Pocorni, Jetro; Powell, John; Ilar, Torbjörn; Schwarz, A.; Kaplan, Alexander

    2013-01-01

    This paper discusses the strategy appropriate to investigating the state of the art of laser cutting from an industrial point of view. The importance of creating the samples in a high quality industrial environment is emphasised and preliminary results are presented.

  6. A State-of-the-Art Report on Technologies of a Safety Assessment and a Radioactivity Exposure Assessment for the Decommissioning Process of Nuclear Facilities

    International Nuclear Information System (INIS)

    Jeong, Kwan Seong; Kang, Young Ae; Lee, Dong Gyu; Lee, Kune Woo; Jung, Chong Hun

    2007-09-01

    This report is to provide the reference contents of research and development for technologies of radioactivity exposure and safety assessment for development of the decommissioning technology for nuclear facilities. This report consists of as follows: - Analyzing and discussing on state-of-the-art technologies of a radioactivity exposure assessment of a decommissioning for nuclear facilities - Analyzing and discussing on state-of-the-art technologies of a safety assessment of a decommissioning for nuclear facilities

  7. A State-of-the-Art Report on Technologies of a Safety Assessment and a Radioactivity Exposure Assessment for the Decommissioning Process of Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Kwan Seong; Kang, Young Ae; Lee, Dong Gyu; Lee, Kune Woo; Jung, Chong Hun

    2007-09-15

    This report is to provide the reference contents of research and development for technologies of radioactivity exposure and safety assessment for development of the decommissioning technology for nuclear facilities. This report consists of as follows: - Analyzing and discussing on state-of-the-art technologies of a radioactivity exposure assessment of a decommissioning for nuclear facilities - Analyzing and discussing on state-of-the-art technologies of a safety assessment of a decommissioning for nuclear facilities.

  8. The Possibility to Use Genetic Algorithms and Fuzzy Systems in the Development of Tutorial Systems

    Directory of Open Access Journals (Sweden)

    Anca Ioana ANDREESCU

    2006-01-01

    Full Text Available In this paper we are presenting state of the art information methods and techniques that can be applied in the development of efficient tutorial systems and also the possibility to use genetic algorithms and fuzzy systems in the construction of such systems. All this topics have been studied during the development of the research project INFOSOC entitled "Tutorial System based on Eduknowledge for Work Security and Health in SMEs According to the European Union Directives" accomplished by a teaching stuff from the Academy of Economic Studies, Bucharest, in collaboration with the National Institute for Research and Development in Work Security, the National Institute for Small and Middle Enterprises and SC Q’NET International srl.

  9. State-of-the-art technologies of gallium oxide power devices

    Science.gov (United States)

    Higashiwaki, Masataka; Kuramata, Akito; Murakami, Hisashi; Kumagai, Yoshinao

    2017-08-01

    Gallium oxide (Ga2 O3 ) has gained increased attention for power devices due to its superior material properties and the availability of economical device-quality native substrates. This review illustrates recent advances in Ga2 O3 device technologies, beginning with an overview of the social circumstances that motivate the development of new-generation switching devices. Following an introduction to the material properties of Ga2 O3 from the viewpoint of power electronics, growth technologies of Ga2 O3 bulk single crystals and epitaxial thin films are discussed. The fabrication and performance of state-of-the-art Ga2 O3 transistors and diodes are then described. We conclude by identifying the directions and challenges of Ga2 O3 power device development in the near future.

  10. State of the art of CO laser angioplasty system

    Science.gov (United States)

    Arai, Tsunenori; Mizuno, Kyoichi; Miyamoto, Akira; Sakurada, Masami; Kikuchi, Makoto; Kurita, Akira; Nakamura, Haruo; Takaoka, Hidetsugu; Utsumi, Atsushi; Takeuchi, Kiyoshi

    1994-07-01

    A unique percutaneous transluminal coronary angioplasty system new IR therapy laser with IR glass fiber delivery under novel angioscope guidance was described. Carbon monoxide (CO) laser emission of 5 mm in wavelength was employed as therapy laser to achieve precise ablation of atheromatous plaque with a flexible As-S IR glass fiber for laser delivery. We developed the first medical CO laser as well as As-S IR glass fiber cable. We also developed 5.5 Fr. thin angioscope catheter with complete directional manipulatability at its tip. The system control unit could manage to prevent failure irradiations and fiber damages. This novel angioplasty system was evaluated by a stenosis model of mongrel dogs. We demonstrated the usefulness of our system to overcome current issues on laser angioplasty using multifiber catheter with over-the-guidewire system.

  11. Mobile radiation monitoring of Mumbai and it's suburb through various road routes by using state-of-the-art radiation monitoring systems

    International Nuclear Information System (INIS)

    Divkar, J.K.; Chatterjee, M.K.; Patil, S.S.; Sharma, Ranjit; Singh, Rajvir; Pradeepkumar, K.S.

    2007-01-01

    The monitoring of environmental radiation in different parts of the country is being periodically carried out with an objective to establish the countrywide baseline dose rate data. The task of quick assessment of impact due to any large-scale radiological emergencies in public domain involves reliable and quick monitoring of dose rate levels using mobile monitoring techniques. In order to achieve higher accuracy and more confidence in measured values, various state-of-the-art monitoring systems are used for mapping a large area. It enables collection and processing of data for rapid and correct evaluation of the situation. The evaluation of measured data from the different systems provides comparable results. This paper describes the radiation mapping of Mumbai and its suburbs carried out through different road routes by installing state-of-the art monitoring systems like CARMS, PMGSS, gamma tracers and micro-R survey meters in a light motor vehicle with the objective of assessing the background radiation level of Mumbai city including Mumbai Suburb, Navi Mumbai and Thane, tagging each data with the positional coordinates and also to detect and locate the presence of orphan sources, if any. The average of measured dose rate levels of Mumbai and Mumbai Suburbs, Navi Mumbai and Thane are 53.3±9.1 nGy.h -1 , 50.9±10.0 nGy.h -1 and 52.1±10.8 nGy.h -1 respectively with maximum ∼ 160 nGy.h -l due to presence of high concentration of 40 K at some locations. (author)

  12. State of art in FE-based fuel performance codes

    International Nuclear Information System (INIS)

    Kim, Hyo Chan; Yang, Yong Sik; Kim, Dae Ho; Bang, Je Geon; Kim, Sun Ki; Koo, Yang Hyun

    2013-01-01

    Fuel performance codes approximate this complex behavior using an axisymmetric, axially-stacked, one-dimensional radial representation to save computation cost. However, the need for improved modeling of PCMI and, particularly, the importance of multidimensional capability for accurate fuel performance simulation has been identified as safety margin decreases. Finite element (FE) method that is reliable and proven solution in mechanical field has been introduced into fuel performance codes for multidimensional analysis. The present state of the art in numerical simulation of FE-based fuel performance predominantly involves 2-D axisymmetric model and 3-D volumetric model. The FRAPCON and FRAPTRAN own 1.5-D and 2-D FE model to simulate PCMI and cladding ballooning. In 2-D simulation, the FALCON code, developed by EPRI, is a 2-D (R-Z and R-θ) fully thermal-mechanically coupled steady-state and transient FE-based fuel behavior code. The French codes TOUTATIS and ALCYONE which are 3-D, and typically used to investigate localized behavior. In 2008, the Idaho National Laboratory (INL) has been developing multidimensional (2-D and 3-D) nuclear fuel performance code called BISON. In this paper, the current state of FE-based fuel performance code and their models are presented. Based on investigation into the codes, requirements and direction of development for new FE-based fuel performance code can be discussed. Based on comparison of models in FE-based fuel performance code, status of art in the codes can be discussed. A new FE-based fuel performance code should include typical pellet and cladding models which all codes own. In particular, specified pellet and cladding model such as gaseous swelling and high burnup structure (HBS) model should be developed to improve accuracy of code as well as consider AC condition. To reduce computation cost, the approximated gap and the optimized contact model should be also developed

  13. Assessment of the State of the Art of Flight Control Technologies as Applicable to Adverse Conditions

    Science.gov (United States)

    Reveley, Mary s.; Briggs, Jeffrey L.; Leone, Karen M.; Kurtoglu, Tolga; Withrow, Colleen A.

    2010-01-01

    Literature from academia, industry, and other Government agencies was surveyed to assess the state of the art in current Integrated Resilient Aircraft Control (IRAC) aircraft technologies. Over 100 papers from 25 conferences from the time period 2004 to 2009 were reviewed. An assessment of the general state of the art in adaptive flight control is summarized first, followed by an assessment of the state of the art as applicable to 13 identified adverse conditions. Specific areas addressed in the general assessment include flight control when compensating for damage or reduced performance, retrofit software upgrades to flight controllers, flight control through engine response, and finally test and validation of new adaptive controllers. The state-of-the-art assessment applicable to the adverse conditions include technologies not specifically related to flight control, but may serve as inputs to a future flight control algorithm. This study illustrates existing gaps and opportunities for additional research by the NASA IRAC Project

  14. The Eugenics Movement and Its Impact on Art Education in the United States

    Science.gov (United States)

    Hunter-Doniger, Tracey

    2017-01-01

    This article argues that the eugenics movement has had three major influences on education in the United States, and reveals how these influences have had an impact on visual arts education in particular. The first influence began with a debate between John Dewey and David Snedden that resulted in a two-tiered tracking system that separated…

  15. A state of the art review of vitrification of high level waste in Europe

    International Nuclear Information System (INIS)

    Heimerl, W.

    This paper gives a review of the state-of-the-art of the development and demonstration of vitrification processes for high level radioactive waste solutions on an industrial scale in four European countries (France, United Kingdom, Federal Republic of Germany and Belgium). Historical development, experiences and operations present status and future plans are presented. Three of the processes which seem to be of major importance are described (AVM-France, HARVEST-United Kingdom, PAMELA Germany/Belgium). (author)

  16. Three State-of-the-Art Methods for Condition Monitoring

    NARCIS (Netherlands)

    Grimmelius, H.T.; Meiler, P.P.; Maas, H.L.M.M.; Bonnier, B.; Grevink, J.S.; Kuilenburg, R.F. van

    1999-01-01

    This paper describes and compares three different state-of-the-art condition monitoring techniques: first principles, feature extraction, and neural networks. The focus of the paper is on the application of the techniques, not on the underlying theory. Each technique is described briefly and is

  17. Evaluating Art Studio Courses at Sultan Qaboos University in Light of the Discipline Based Art Education Theory

    Science.gov (United States)

    Al-Amri, Mohammed

    2010-01-01

    Discipline-Based Art Education (DBAE), a theory developed in the USA, has been influential but also used in Art Education institutions world-wide. One of its stated goals was to develop the quality of teaching art education. Today, it is used as a theory for identifying and assessing good practices in the field of Art Education. The purpose of…

  18. Basic Requirements for Systems Software Research and Development

    Science.gov (United States)

    Kuszmaul, Chris; Nitzberg, Bill

    1996-01-01

    Our success over the past ten years evaluating and developing advanced computing technologies has been due to a simple research and development (R/D) model. Our model has three phases: (a) evaluating the state-of-the-art, (b) identifying problems and creating innovations, and (c) developing solutions, improving the state- of-the-art. This cycle has four basic requirements: a large production testbed with real users, a diverse collection of state-of-the-art hardware, facilities for evalua- tion of emerging technologies and development of innovations, and control over system management on these testbeds. Future research will be irrelevant and future products will not work if any of these requirements is eliminated. In order to retain our effectiveness, the numerical aerospace simulator (NAS) must replace out-of-date production testbeds in as timely a fashion as possible, and cannot afford to ignore innovative designs such as new distributed shared memory machines, clustered commodity-based computers, and multi-threaded architectures.

  19. State of the art review of biofuels production from lignocellulose by thermophilic bacteria.

    Science.gov (United States)

    Jiang, Yujia; Xin, Fengxue; Lu, Jiasheng; Dong, Weiliang; Zhang, Wenming; Zhang, Min; Wu, Hao; Ma, Jiangfeng; Jiang, Min

    2017-12-01

    Biofuels, including ethanol and butanol, are mainly produced by mesophilic solventogenic yeasts and Clostridium species. However, these microorganisms cannot directly utilize lignocellulosic materials, which are abundant, renewable and non-compete with human demand. More recently, thermophilic bacteria show great potential for biofuels production, which could efficiently degrade lignocellulose through the cost effective consolidated bioprocessing. Especially, it could avoid contamination in the whole process owing to its relatively high fermentation temperature. However, wild types thermophiles generally produce low levels of biofuels, hindering their large scale production. This review comprehensively summarizes the state of the art development of biofuels production by reported thermophilic microorganisms, and also concludes strategies to improve biofuels production including the metabolic pathways construction, co-culturing systems and biofuels tolerance. In addition, strategies to further improve butanol production are proposed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. How Has Vocational Culinary Arts Changed as a Result of a Redesign of the Education System.

    Science.gov (United States)

    VanLandingham, Paul G.

    Vocational education reforms that followed passage of the Carl D. Perkins Vocational Education Act of 1963 initiated the development of many new vocational culinary arts programs that trained high school students with state-of-the art equipment. When the National Consortium of Competency Based Education was established in 1973, it changed the form…

  1. Paediatric thoracoscopy: State of the art | Van Niekerk | South ...

    African Journals Online (AJOL)

    Many advanced procedures, including lobectomy, repair of tracheo-oesophageal fistula, excision of mediastinal tumours and diaphragmatic hernia repairs, are being done routinely in paediatric surgery centres around the world. This article reviews the state of the art of thoracoscopic surgery in children. The author selected ...

  2. Security of embedded automotive networks: state of the art and a research proposal

    OpenAIRE

    Studnia , Ivan; Nicomette , Vincent; Alata , Eric; Deswarte , Yves; Kaâniche , Mohamed; Laarouchi , Youssef

    2013-01-01

    International audience; Embedded electronic components are nowadays a prominent part of a car's architecture. Moreover, modern cars are now able to communicate with other devices through many wired or wireless interfaces. As a consequence, the security of embedded systems in cars has become a main concern for the manufacturers. This paper aims at 1) presenting a short overview of the current attacks already known and experimented against vehicles as well as the current state of the art of the...

  3. Radioactive waste management: State of the art in the world. Part 3

    International Nuclear Information System (INIS)

    Pahissa Campa, Jaime; Phahissa, Marta H. de

    2001-01-01

    A summary of current management plans in the world for high level wastes and spent fuel is presented in this paper. Countries have programs in different development stages. Some of them formally begun the sitting process, others have underground laboratory projects in progress either as part of the site selection process (site characterization) or as REtD demonstrations. Besides the safety related requirements, various political, social, legal and environmental considerations are taken into account. Lessons learned can be drawn from the analysis of the state of art described in this paper. (author)

  4. Harvesting Robots for High-value Crops: State-of-the-art Review and Challenges Ahead

    NARCIS (Netherlands)

    Bac, C.W.; Henten, van E.; Hemming, J.; Edan, Y.

    2014-01-01

    This review article analyzes state-of-the-art and future perspectives for harvesting robots in high-value crops. The objectives were to characterize the crop environment relevant for robotic harvesting, to perform a literature review on the state-of-the-art of harvesting robots using quantitative

  5. Preliminary power train design for a state-of-the-art electric vehicle

    Science.gov (United States)

    Ross, J. A.; Wooldridge, G. A.

    1978-01-01

    The state-of-the-art (SOTA) of electric vehicles built since 1965 was reviewed to establish a base for the preliminary design of a power train for a SOTA electric vehicle. The performance of existing electric vehicles were evaluated to establish preliminary specifications for a power train design using state-of-the-art technology and commercially available components. Power train components were evaluated and selected using a computer simulation of the SAE J227a Schedule D driving cycle. Predicted range was determined for a number of motor and controller combinations in conjunction with the mechanical elements of power trains and a battery pack of sixteen lead-acid batteries - 471.7 kg at 0.093 MJ/Kg (1040 lbs. at 11.7 Whr/lb). On the basis of maximum range and overall system efficiency using the Schedule D cycle, an induction motor and 3 phase inverter/controller was selected as the optimum combination when used with a two-speed transaxle and steel belted radial tires. The predicted Schedule D range is 90.4 km (56.2 mi). Four near term improvements to the SOTA were identified, evaluated, and predicted to increase range approximately 7%.

  6. Knowledge discovery in traditional Chinese medicine: state of the art and perspectives.

    Science.gov (United States)

    Feng, Yi; Wu, Zhaohui; Zhou, Xuezhong; Zhou, Zhongmei; Fan, Weiyu

    2006-11-01

    As a complementary medical system to Western medicine, traditional Chinese medicine (TCM) provides a unique theoretical and practical approach to the treatment of diseases over thousands of years. Confronted with the increasing popularity of TCM and the huge volume of TCM data, historically accumulated and recently obtained, there is an urgent need to explore these resources effectively by the techniques of knowledge discovery in database (KDD). This paper aims at providing an overview of recent KDD studies in TCM field. A literature search was conducted in both English and Chinese publications, and major studies of knowledge discovery in TCM (KDTCM) reported in these materials were identified. Based on an introduction to the state of the art of TCM data resources, a review of four subfields of KDTCM research was presented, including KDD for the research of Chinese medical formula, KDD for the research of Chinese herbal medicine, KDD for TCM syndrome research, and KDD for TCM clinical diagnosis. Furthermore, the current state and main problems in each subfield were summarized based on a discussion of existing studies, and future directions for each subfield were also proposed accordingly. A series of KDD methods are used in existing KDTCM researches, ranging from conventional frequent itemset mining to state of the art latent structure model. Considerable interesting discoveries are obtained by these methods, such as novel TCM paired drugs discovered by frequent itemset analysis, functional community of related genes discovered under syndrome perspective by text mining, the high proportion of toxic plants in the botanical family Ranunculaceae disclosed by statistical analysis, the association between M-cholinoceptor blocking drug and Solanaceae revealed by association rule mining, etc. It is particularly inspiring to see some studies connecting TCM with biomedicine, which provide a novel top-down view for functional genomics research. However, further developments

  7. State of the art in perceptual design of hearing aids

    Science.gov (United States)

    Edwards, Brent W.; van Tasell, Dianne J.

    2002-05-01

    Hearing aid capabilities have increased dramatically over the past six years, in large part due to the development of small, low-power digital signal processing chips suitable for hearing aid applications. As hearing aid signal processing capabilities increase, there will be new opportunities to apply perceptually based knowledge to technological development. Most hearing loss compensation techniques in today's hearing aids are based on simple estimates of audibility and loudness. As our understanding of the psychoacoustical and physiological characteristics of sensorineural hearing loss improves, the result should be improved design of hearing aids and fitting methods. The state of the art in hearing aids will be reviewed, including form factors, user requirements, and technology that improves speech intelligibility, sound quality, and functionality. General areas of auditory perception that remain unaddressed by current hearing aid technology will be discussed.

  8. The development of robot art

    DEFF Research Database (Denmark)

    Pagliarini, Luigi; Lund, Henrik Hautop

    2009-01-01

    Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk...... that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest....

  9. The state of the art of numerical modeling of thermohydrologic flow in fractured rock masses

    International Nuclear Information System (INIS)

    Wang, J.S.Y.; Sterbentz, R.A.; Tsang, C.F.

    1982-01-01

    The state of the art of numerical modeling of thermohydrologic flow in fractured rock masses is reviewed and a comparative study is made of several models which have been developed in nuclear waste isolation, geothermal energy, ground water hydrology, petroleum engineering, and other geologic fields. The general review is followed by individual summaries of each model and the main characteristics of its governing equations, numerical solutions, computer codes, validations, and applications

  10. Electric road vehicles. Technology, state of the art, applications. Elektrische Strassenfahrzeuge. Technik, Entwicklungsstand und Einsatzbereiche

    Energy Technology Data Exchange (ETDEWEB)

    Naunin, D [Technische Univ. Berlin (Germany, F.R.). Inst. fuer Elektronik; Bader, C [Daimler-Benz AG, Stuttgart (Germany, F.R.); Driehorst, F A; Kalberlah, A [Volkswagenwerk AG, Wolfsburg (Germany, F.R.); Fischer, W [Asea Brown Boveri AG, Heidelberg (Germany, F.R.); Kiehne, H A [Zweckverband Elektrotechnik- und Elektronikindustrie e.V. (ZVEI), Hannover (Germany, F.R.). Fachverband Batter

    1989-01-01

    The book discusses (1) economic and traffic policy aspects; (2) new battery systems; (3) different motor concepts; (4) possibilities and problems of serial production; (5) present applications in spas and chances for future applications. The latest state of the art and of the current discussion are presented. (orig./HP) With 139 figs.

  11. The Beijing Olympics and the art of nation-state maintenance

    NARCIS (Netherlands)

    de Kloet, J.; Pak Lei Chong, G.; Liu, W.

    2008-01-01

    This article maps out how different actors are involved in the promotion and mediation of the Olympics. It looks at the roles of, first, the nation-state, through an analysis of the promotional materials; second, the art world and global companies, through an analysis of the touring exhibition

  12. 2008 State-of-the-Art : High Level Radioactive Waste Disposal Facilities and Project Review of Proceding Countries

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Heui Joo; Choi, Jong Won; Lee, Jong Youl; Jung, Jong Tae; Kim, Sung Ki; Lee, Min Soo; Cho, Dong Keun; Kook, Dong Hak

    2008-11-15

    High level radioactive waste disposal system project for advanced nuclear fuel cycle produced this report which are dealing with the repository status of proceding countries as of 2008. This report has brief review on disposal facilities which are operating and will be operating and on future plan of those nations. The other report 'Development of the Geological Disposal System for High Level Waste' which was produced like this report time and this report would help the readers grasp the current repository status. Because our country is a latecomer in the HLW disposal world, it is strongly recommended to catch up with advanced disposal system and concepts of developed nations and this report is expected to make it possible. There are several nations which were the main survey target; Finland, USA, Sweden, Germany, France, Switzerland, and Japan. Recent information was applied to this report and our project team will produce annual state-of-the-art report with continuous updates.

  13. A Snapshot of State Policies for Arts Education

    Science.gov (United States)

    Arts Education Partnership, 2014

    2014-01-01

    It has been said that while history shapes the hand a state is dealt, public policy determines how the hand is played. State policy for K-12 education--and, by extension, for arts education--is shaped through the actions of various state governmental entities--governors, legislatures, courts, and commissioners and boards of education--in response…

  14. Modular robotics overview of the 'state of the art'

    International Nuclear Information System (INIS)

    Kress, R.L.; Jansen, J.F.; Hamel, W.R.

    1996-08-01

    The design of a robotic arm processing modular components and reconfigurable links is the general goal of a modular robotics development program. The impetus behind the pursuit of modular design is the remote engineering paradigm of improved reliability and availability provided by the ability to remotely maintain and repair a manipulator operating in a hazardous environment by removing and replacing worn or failed modules. Failed components can service off- line and away from hazardous conditions. The desire to reconfigure an arm to perform different tasks is also an important driver for the development of a modular robotic manipulator. In order to bring to fruition a truly modular manipulator, an array of technical challenges must be overcome. These range from basic mechanical and electrical design considerations such as desired kinematics, actuator types, and signal and transmission types and routings, through controls issues such as the need for control algorithms capable of stable free space and contact control, to computer and sensor design issues like consideration of the use of embedded processors and redundant sensors. This report presents a brief overview of the state of the art of technical issues relevant of modular robotic arm design. The focus is on breadth of coverage, rather than depth, in order to provide a reference frame for future development

  15. Analyst workbenches state of the art report

    CERN Document Server

    Rock-Evans, R

    1987-01-01

    Analyst Workbenches examines various aspects of analyst workbenches and the tasks and data that they should support. The major advances and state of the art in analyst workbenches are discussed. A comprehensive list of the available analyst workbenches, both the experimental and the commercial products, is provided. Comprised of three parts, this book begins by describing International Computers Ltd's approach to automating analysis and design. It then explains what business analysis really means, outlines the principal features of analyst workbenches, and considers the ways in which they can

  16. Teacher Evaluation in the Arts Disciplines: Three State Perspectives

    Science.gov (United States)

    Gates, Karol; Hansen, Deb; Tuttle, Lynn

    2015-01-01

    The purpose of this report is to provide insight into how state departments are implementing legislative requirements for educator evaluation, particularly the specific circumstances states encounter around arts education. Spotlights on Delaware, a first-round recipient of Race to the Top funding, and Colorado and Arizona, third-round recipients,…

  17. Establishment of database and network for research of stream generator and state of the art technology review

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jae Bong; Hur, Nam Su; Moon, Seong In; Seo, Hyeong Won; Park, Bo Kyu; Park, Sung Ho; Kim, Hyung Geun [Sungkyunkwan Univ., Seoul (Korea, Republic of)

    2004-02-15

    A significant number of steam generator tubes are defective and are removed from service or repaired world widely. This wide spread damage has been caused by diverse degradation mechanisms, some of which are difficult to detect and predict. Regarding domestic nuclear power plants, also, the increase of number of operating nuclear power plants and operating periods may result in the increase of steam generator tube failure. So, it is important to carry out the integrity evaluation process to prevent the steam generator tube damage. There are two objectives of this research. The one is to make database for the research of steam generator at domestic research institution. It will increase the efficiency and capability of limited domestic research resources by sharing data and information through network organization. Also, it will enhance the current standard of integrity evaluation procedure that is considerably conservative but can be more reasonable. The second objective is to establish the standard integrity evaluation procedure for steam generator tube by reviewing state of the art technology. The research resources related to steam generator tubes are managed by the established web-based database system. The following topics are covered in this project: development of web-based network for research on steam generator tubes review of state of the art technology.

  18. Establishment of database and network for research of stream generator and state of the art technology review

    International Nuclear Information System (INIS)

    Choi, Jae Bong; Hur, Nam Su; Moon, Seong In; Seo, Hyeong Won; Park, Bo Kyu; Park, Sung Ho; Kim, Hyung Geun

    2004-02-01

    A significant number of steam generator tubes are defective and are removed from service or repaired world widely. This wide spread damage has been caused by diverse degradation mechanisms, some of which are difficult to detect and predict. Regarding domestic nuclear power plants, also, the increase of number of operating nuclear power plants and operating periods may result in the increase of steam generator tube failure. So, it is important to carry out the integrity evaluation process to prevent the steam generator tube damage. There are two objectives of this research. The one is to make database for the research of steam generator at domestic research institution. It will increase the efficiency and capability of limited domestic research resources by sharing data and information through network organization. Also, it will enhance the current standard of integrity evaluation procedure that is considerably conservative but can be more reasonable. The second objective is to establish the standard integrity evaluation procedure for steam generator tube by reviewing state of the art technology. The research resources related to steam generator tubes are managed by the established web-based database system. The following topics are covered in this project: development of web-based network for research on steam generator tubes review of state of the art technology

  19. Digital radiography of the chest: state of the art

    International Nuclear Information System (INIS)

    Souto, M.; Malagari, K.S.; Tucker, D.; Tahoces, P.G.; Correa, J.; Benakis, V.S.; Roussos, C.; Strigaris, K.A.; Vidal, J.J.; Barnes, G.T.; Fraser, R.G.

    1994-01-01

    Digital image acquisition possesses a number of advantages over conventional systems in radiographic examination of the chest, the most important of which is its greater dynamic range. In addition, once digital images are acquired, they can be processed by computer in ways that cannot be rivalled by conventional analog techniques. Finally, digital images can be stored, retrieved and transmitted to local or remote sites. Here the status of the different digital systems employed in chest radiology and commonly used image processing techniques are reviewed. Also discussed are the current clinical applications of integrating digital chest radiography with a picture archiving and communication system (PACS) along with the difficulties typically encountered. Studies with a variety of digital techniques have been carried out on several fronts. Computed radiography based on photostimulable phosphor (CR) has replaced screen-film imaging in certain applications (i.e. bedside imaging). However, CR has limitations, namely its poor X-ray utilisation efficiency at high X-ray tube voltages and sensitivity to scatter; therefore, it is not ideal for all applications. Recently, a dedicated digital chest unit with excellent X-ray utilisation efficiency at high X-ray tube potentials has been introduced. On the basis of the state-of-the-art capabilities and research during the past decade, recommendations are made regarding the most desirable equipment specifications for dedicated and bedside digital chest radiography. (orig.)

  20. On the impact of optimisation models in maintenance decision making: the state of the art

    International Nuclear Information System (INIS)

    Dekker, Rommert; Scarf, Philip A.

    1998-01-01

    In this paper we discuss the state of the art in applications of maintenance optimisation models. After giving a short introduction to the area, we consider several ways in which models may be used to optimise maintenance, such as case studies, operational and strategic decision support systems, and give examples of each of them. Next we discuss several areas where the models have been applied successfully. These include civil structure and aeroplane maintenance. From a comparative point of view, we discuss future prospects

  1. State of the art of numerical modeling of thermohydrologic flow in fractured rock mass

    International Nuclear Information System (INIS)

    Wang, J.S.Y.; Tsang, C.F.; Sterbentz, R.A.

    1983-01-01

    The state of the art of numerical modeling of thermohydrologic flow in fractured rock masses is reviewed and a comparative study is made of several models which have been developed in nuclear waste isolation, geothermal energy, ground-water hydrology, petroleum engineering, and other geologic fields. The general review is followed by separate summaries of the main characteristics of the governing equations, numerical solutions, computer codes, validations, and applications for each model

  2. State of the art and challenges in development of electrical contact materials in the light of the RoHS directive

    Directory of Open Access Journals (Sweden)

    Ćosović V.

    2012-01-01

    Full Text Available The article surveys current state of the art and challenges in the development of the electrical contact materials in the light of the EU Directive on Restriction of Hazardous Substances (RoHS. The focus was placed on widely used silver-cadmium alloys. According to this directive, as of July 1, 2006, use of six hazardous materials, including cadmium, are restricted for applicable electrical and electronic products intended for the EU market. In contrast, traditionally preferred material for production of electrical contacts is Ag-CdO, due to its outstanding functional properties. These conflicting interests result in present state where RoHS directive has not yet been implemented in its original form and has undergone numerous amendments and exceptions regarding the use of cadmium. Main reason for this seems to be the unrealistic time frame imposed by legislation. Although, significant effort has been put into research and development of alternative materials, there are still cases where adequate replacement materials had not been found. Therefore, importance of synchronicity between legislation and technological progress i.e. communication between legislative administration and industry and academia is brought to light as well as some common issues that may arise with an introduction of new replacement materials or product modification. [Projekat Ministarstva nauke Republike SRbije, br. OI 172037 and TR 34023

  3. PARA'04, State-of-the-art in scientific computing

    DEFF Research Database (Denmark)

    Madsen, Kaj; Wasniewski, Jerzy

    This meeting in the series, the PARA'04 Workshop with the title ``State of the Art in Scientific Computing'', was held in Lyngby, Denmark, June 20-23, 2004. The PARA'04 Workshop was organized by Jack Dongarra from the University of Tennessee and Oak Ridge National Laboratory, and Kaj Madsen and J...

  4. State of the art of solid state dosimetry; Estado da arte em dosimetria do estado solido

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Susana O., E-mail: sosouza@ufs.br [Universidade Federal de Sergipe (UFS), Sao Cristovao, SE (Brazil); Yamamoto, Takayoshi [Radioisotope Research Center, Osaka University (Japan); D' Errico, Francesco, E-mail: francesco.derrico@yale.edu [Yale University, School of Medicine, CT (United States)

    2014-07-01

    Passive solid-state detectors still dominate the personal dosimetry field. This article provides state of the art in this field and summarizes the most recent works presented on TL, OSL and RPL during the 17th International Conference on Solid State Dosimetry held in Recife in September 2013. The Article contains in particular the techniques Thermoluminescence (TL), Optically Stimulated Luminescence (OSL), radio photoluminescence (RPL). Thermoluminescence has the biggest advantage of the wide availability of commercial materials for dosimetry, and the nature tissue-equivalent of several of these materials. The limitation of the TL dosimetry presents fading luminance signal and the need for high temperatures to obtain the signal. The Optically Stimulated Luminescence has the advantages of high sensitivity, the possibility of multiple reading, while its limit is the need to use response compensating filters in addition to the high cost of equipment and dosimeters still restricted very few options trading . The radio photoluminescence has a reading that is completely non-destructive, but their dosimeters present lack of tissue-equivalent and a high cost. Presents the details of the techniques and the advantages and limitations of each of these will be discussed.

  5. Art Education and the Development of Self-Concept.

    Science.gov (United States)

    Hausman, Jerome J.

    References are often made in art education literature about how art can enhance individuals' self-concepts. This document discusses the work of authors, Manuel Barkan, George Herbert Mead, and Sigmund Freud, who support this concept. Barkan's theory concerning how an individual's personality develops and changes by interacting socially is…

  6. Panel session on the state of the art in nuclear reactor technology

    International Nuclear Information System (INIS)

    Roche, R.

    1977-01-01

    The state of the art in the technology of pressure vessels and piping of the primary cooling circuit of nuclear steam supply systems is discussed. Design and analysis are considered in the frame of the two types of nuclear reactor retained in France (PWR and the pool type LMFBR). Designing nuclear pressure vessels asks for some more specific Codes and Standards than for conventional vessels, and the stress analysis complementing by a direct comparison between operating loads and failure loads is a mandatory practice in France. As for pool type LMFBR, the structural problems of the nuclear vessel are essentially due to component shape, small thickness, and large stress range

  7. Ecological effects assessment: requirements vs state-of-the-art

    International Nuclear Information System (INIS)

    McKenzie, D.H.; Thomas, J.M.; Eberhardt, L.L.

    1981-05-01

    Concerns for environmental quality, the ecologist's understanding of ecosystems, and the ability to quantitatively sample and evaluate hypotheses have contributed to current requirements and the state-of-the-art in ecological effects assessments in refard to nuclear power plants. The current cooling system approaches, data collection programs, and ecological effects assessments reflect these contributions. Over a decade of experience provides the basis for a timely review and evaluation of current proactice. The magnitude of economic and environmental resources being committed to cooling system alternatives mandates that the decision-making process result in as many optimal choices as possible. In addition, the resources being devoted to environmental data collection and integration provide considerable motivation for providing meaningful input to the decision-making process. It is maintained that the input should be as quantitative and as free from subjective content as is reasonably possible. An alternative viewpoint suggests that the past several decades of experience be considered but a first step, and the current task to be one of designing a second step

  8. State of the Art Power-in Tube Niobium-Tin Superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Godeke, A.; Ouden, A. Den; Nijhuis, A.; ten Kate, H.H.J.

    2008-06-01

    Powder-in-Tube (PIT) processed Niobium-Tin wires are commercially manufactured for nearly three decades and have demonstrated a combination of very high current density (presently up to 2500 A mm{sup -2} non-Cu at 12 T and 4.2 K) with fine (35 {micro}m), well separated filaments. We review the developments that have led to the present state of the art PIT Niobium-Tin wires, discuss the wire manufacturing and A15 formation processes, and describe typical superconducting performance in relation to magnetic field and strain. We further highlight successful applications of PIT wires and conclude with an outlook on possibilities for further improvements in the performance of PIT Niobium-Tin wires.

  9. State-of-the-art assessment of electric vehicles and hybrid vehicles

    Science.gov (United States)

    1977-01-01

    The Electric and Hybrid Vehicle Research, Development, and Demonstration Act of 1976 (PL 94-413) requires that data be developed to characterize the state of the art of vehicles powered by an electric motor and those propelled by a combination of an electric motor and an internal combustion engine or other power sources. Data obtained from controlled tests of a representative number of sample vehicles, from information supplied by manufacturers or contained in the literature, and from surveys of fleet operators of individual owners of electric vehicles is discussed. The results of track and dynamometer tests conducted by NASA on 22 electric, 2 hybrid, and 5 conventional vehicles, as well as on 5 spark-ignition-engine-powered vehicles, the conventional counterparts of 5 of the vehicles, are presented.

  10. Some Aspects of the State-of-the-Arts in Biomedical Science ...

    African Journals Online (AJOL)

    Summary: In the biomedical sciences, there is need to generate solutions for Africa's health and economic problems through the impact of university research. To guide organizational transformation, the author here presents some aspects of the state-of-the-arts of biomedical science research in advanced countries using a ...

  11. Advanced public transportation systems : the state of the art

    Science.gov (United States)

    1991-03-01

    This report documents one of the early initiatives of UMTA's Advanced Public Transportation Systems (APTS) Program, a program structured to undertake research and development of innovative applications of advanced navigation, information, and communi...

  12. A Process for Capturing the Art of Systems Engineering

    Science.gov (United States)

    Owens, Clark V., III; Sekeres, Carrie; Roumie, Yasmeen

    2016-01-01

    There is both an art and a science to systems engineering. The science of systems engineering is effectively captured in processes and procedures, but the art is much more elusive. We propose that there is six step process that can be applied to any systems engineering organization to create an environment from which the "art" of that organization can be captured, be allowed to evolve collaboratively and be shared with all members of the organization. This paper details this process as it was applied to NASA Launch Services Program (LSP) Integration Engineering Branch during a pilot program of Confluence, a Commercial Off The Shelf (COTS) wiki tool.

  13. State-of-the-Art in Open Courseware Initiatives Worldwide

    Science.gov (United States)

    Vladoiu, Monica

    2011-01-01

    We survey here the state-of-the-art in open courseware initiatives worldwide. First, the MIT OpenCourseWare project is overviewed, as it has been the real starting point of the OCW movement. Usually, open courseware refers to a free and open digital publication of high quality university level educational materials that are organized as courses,…

  14. CMOS image sensors: State-of-the-art

    Science.gov (United States)

    Theuwissen, Albert J. P.

    2008-09-01

    This paper gives an overview of the state-of-the-art of CMOS image sensors. The main focus is put on the shrinkage of the pixels : what is the effect on the performance characteristics of the imagers and on the various physical parameters of the camera ? How is the CMOS pixel architecture optimized to cope with the negative performance effects of the ever-shrinking pixel size ? On the other hand, the smaller dimensions in CMOS technology allow further integration on column level and even on pixel level. This will make CMOS imagers even smarter that they are already.

  15. State of the art and tendencies of development of factographic information systems in nuclear research and nuclear technology

    International Nuclear Information System (INIS)

    Jankowski, L.

    1983-01-01

    Factographic information systems for nuclear research and nuclear technology have become important preconditions of research and development process intensification in the CMEA member countries. Their consistent development and transformation into logical information systems calls for a new approach to the problems of computer technique and program development

  16. STATE OF THE ART TECHNIQUES USED FOR NOISE SOURCE IDENTIFICATION ON COMPLEX BODIES

    Directory of Open Access Journals (Sweden)

    Corneliu STOICA

    2010-03-01

    Full Text Available Over the last few decades, many approaches have been undertaken in order to asses detailed noise source identification on complex bodies, i.e. aircrafts, cars, machinery. Noise source identification implies to accurately obtain the position and frequency of the dominant noise sources. There are cases where traditional testing methods can not be applied at all or their use involves some limitations. Optical systems used for near field analysis require a line of sight that may not be available. The state-of-the-art technology for this purpose is the use of a large number of microphones whose signals are acquired simultaneously, i.e. microphone phased array. Due to the excessive cost of the instruments and the data acquisition system required, the implementation of this technology was restricted to governmental agencies (NASA, DLR and big companies such as Boeing and Airbus. During the past years, this technique was developed in wind tunnels and some universities to perform noise source identification on scale airframes, main landing gear models, and aerodynamic profiles (used on airplanes, helicopter rotors and wind mills.

  17. State-of-the-art MRI techniques in neuroradiology: principles, pitfalls, and clinical applications

    Energy Technology Data Exchange (ETDEWEB)

    Viallon, Magalie [Universite de Lyon, CREATIS, UMR CNRS 5220 - INSERM U1044, INSA de Lyon, Lyon (France); Universite de Lyon-Saint-Etienne, Department of Radiology, Centre Hospitalier Universitaire de Saint-Etienne, Saint Etienne (France); Cuvinciuc, Victor; Barnaure-Nachbar, Isabelle; Lovblad, Karl-Olof; Haller, Sven [University Hospital of Geneva, Department of Neuroradiology, Geneva (Switzerland); Delattre, Benedicte; Toso-Patel, Seema; Becker, Minerva [University Hospital of Geneva, Department of Radiology, Geneva (Switzerland); Merlini, Laura [University Hospital of Geneva, Department of Pediatric Radiology, Geneva (Switzerland)

    2015-05-01

    This article reviews the most relevant state-of-the-art magnetic resonance (MR) techniques, which are clinically available to investigate brain diseases. MR acquisition techniques addressed include notably diffusion imaging (diffusion-weighted imaging (DWI), diffusion tensor imaging (DTI), and diffusion kurtosis imaging (DKI)) as well as perfusion imaging (dynamic susceptibility contrast (DSC), arterial spin labeling (ASL), and dynamic contrast enhanced (DCE)). The underlying models used to process these images are described, as well as the theoretic underpinnings of quantitative diffusion and perfusion MR imaging-based methods. The technical requirements and how they may help to understand, classify, or follow-up neurological pathologies are briefly summarized. Techniques, principles, advantages but also intrinsic limitations, typical artifacts, and alternative solutions developed to overcome them are discussed. In this article, we also review routinely available three-dimensional (3D) techniques in neuro MRI, including state-of-the-art and emerging angiography sequences, and briefly introduce more recently proposed 3D quantitative neuro-anatomy sequences, and new technology, such as multi-slice and multi-transmit imaging. (orig.)

  18. State-of-the-art MRI techniques in neuroradiology: principles, pitfalls, and clinical applications

    International Nuclear Information System (INIS)

    Viallon, Magalie; Cuvinciuc, Victor; Barnaure-Nachbar, Isabelle; Lovblad, Karl-Olof; Haller, Sven; Delattre, Benedicte; Toso-Patel, Seema; Becker, Minerva; Merlini, Laura

    2015-01-01

    This article reviews the most relevant state-of-the-art magnetic resonance (MR) techniques, which are clinically available to investigate brain diseases. MR acquisition techniques addressed include notably diffusion imaging (diffusion-weighted imaging (DWI), diffusion tensor imaging (DTI), and diffusion kurtosis imaging (DKI)) as well as perfusion imaging (dynamic susceptibility contrast (DSC), arterial spin labeling (ASL), and dynamic contrast enhanced (DCE)). The underlying models used to process these images are described, as well as the theoretic underpinnings of quantitative diffusion and perfusion MR imaging-based methods. The technical requirements and how they may help to understand, classify, or follow-up neurological pathologies are briefly summarized. Techniques, principles, advantages but also intrinsic limitations, typical artifacts, and alternative solutions developed to overcome them are discussed. In this article, we also review routinely available three-dimensional (3D) techniques in neuro MRI, including state-of-the-art and emerging angiography sequences, and briefly introduce more recently proposed 3D quantitative neuro-anatomy sequences, and new technology, such as multi-slice and multi-transmit imaging. (orig.)

  19. State of the art: two-phase flow calibration techniques

    International Nuclear Information System (INIS)

    Stanley, M.L.

    1977-01-01

    The nuclear community faces a particularly difficult problem relating to the calibration of instrumentation in a two-phase flow steam/water environment. The rationale of the approach to water reactor safety questions in the United States demands that accurate measurements of mass flows in a decompressing two-phase flow be made. An accurate measurement dictates an accurate calibration. This paper addresses three questions relating to the state of the art in two-phase calibration: (1) What do we mean by calibration. (2) What is done now. (3) What should be done

  20. A state-of-the-art compact SiC photovoltaic inverter with maximum power point tracking function

    Science.gov (United States)

    Ando, Yuji; Oku, Takeo; Yasuda, Masashi; Ushijima, Kazufumi; Matsuo, Hiroshi; Murozono, Mikio

    2018-01-01

    We have developed a 150-W SiC-based photovoltaic (PV)-inverter with the maximum power point tracking (MPPT) function. The newly developed inverter achieved a state-of-the-art combination of the weight (0.79 kg) and the volume (790 mm3) as a 150-250 W class PV-inverter. As compared to the original version that we have previously reported, the weight and volume were decreased by 37% and 38%, respectively. This compactness originated from the optimized circuit structure and the increased density of a wiring circuit. Conversion efficiencies of the MPPT charge controller and the direct current (DC)-alternating current (AC) converter reached 96.4% and 87.6%, respectively. These efficiency values are comparable to those for the original version. We have developed a PV power generation system consisting of this inverter, a spherical Si solar cell module, and a 15-V Li-ion laminated battery. The total weight of the system was below 6 kg. The developed system exhibited stable output power characteristics, even when the weather conditions were fluctuated. These compactness, high efficiencies, and excellent stability clearly indicated the feasibility of SiC power devices even for sub-kW class PV power generation systems.

  1. Development of advanced technological systems for accelerator transmutation

    Energy Technology Data Exchange (ETDEWEB)

    Batskikh, G.I.; Bondarev, B.I.; Durkin, A.P. [Russian Academy of Sciences, Moscow (Russian Federation)] [and others

    1995-10-01

    A development concept of the accelerator nuclear energy reactors is considered for energy generation and nuclear power plant waste conversion into short-lived nuclides along with the requirements imposed on the technological systems necessary for implementation of such projects. The state of art in the field is discussed.

  2. A state-of-the-art anisotropic rock deformation model incorporating the development of mobilised shear strength

    Science.gov (United States)

    Noor, M. J. Md; Jobli, A. F.

    2018-04-01

    Currently rock deformation is estimated using the relationship between the deformation modulus Em and the stress-strain curve. There have been many studies conducted to estimate the value of Em. This Em is basically derived from conducting unconfined compression test, UCS. However, the actual stress condition of the rock in the ground is anisotropic stress condition where the rock mass is subjected to different confining and vertical pressures. In addition, there is still no empirical or semi-empirical framework that has been developed for the prediction of rock stress-strain response under anisotropic stress condition. Arock triaxial machine GCTS Triaxial RTX-3000 has been deployed to obtain the anisotropic stress-strain relationship for weathered granite grade II from Rawang, Selangor sampled at depth of 20 m and subjected to confining pressure of 2 MPa, 7.5 MPa and 14 MPa. The developed mobilised shear strength envelope within the specimen of 50 mm diameter and 100 mm height during the application of the deviator stress is interpreted from the stress-strain curves. These mobilised shear strength envelopes at various axial strains are the intrinsic property and unique for the rock. Once this property has been established then it is being used to predict the stress-strain relationship at any confining pressure. The predicted stress-strain curves are compared against the curves obtained from the tests. A very close prediction is achieved to substantiate the applicability of this rock deformation model. This is a state-of-the art rock deformation theory which characterise the deformation base on the applied load and the developed mobilised shear strength within the rock body.

  3. State-of-the-art report on the theoretical modeling of interfacial area concentration

    International Nuclear Information System (INIS)

    Lee, Won Jae; Euh, Dong Jin

    1998-03-01

    Classical approaches based on experimental correlations and the mechanistic approaches based on the interfacial area concentration were reviewed. The study focuses on the state-of-the-art researches based on the mechanistic modeling of the interfacial area concentration. The investigation is performed by classifying the mechanistic modeling approaches into those using the number density transport equations supported with a simple algebraic relation for obtaining interfacial area concentration and those using the direct interfacial area transport equations. The modeling approaches are subdivided into one group and multi-group models. The state-of-the-art source terms of transport equations are also investigated for their applicability and limitations. (author). 62 refs., 6 tabs., 49 figs

  4. Art, illusion and the visual system.

    Science.gov (United States)

    Livingstone, M S

    1988-01-01

    The verve of op art, the serenity of a pointillist painting and the 3-D puzzlement of an Escher print derive from the interplay of the art with the anatomy of the visual system. Color, shape and movement are each processed separately by different structures in the eye and brain and then are combined to produce the experience we call perception.

  5. Wind turbine siting: A summary of the state of the art

    Science.gov (United States)

    Hiester, T. R.

    1982-01-01

    The process of siting large wind turbines may be divided into two broad steps: site selection, and site evaluation. Site selection is the process of locating windy sites where wind energy development shows promise of economic viability. Site evaluation is the process of determining in detail for a given site the economic potential of the site. The state of the art in the first aspect of siting, site selection is emphasized. Several techniques for assessing the wind resource were explored or developed in the Federal Wind Energy Program. Local topography and meteorology will determine which of the techniques should be used in locating potential sites. None of the techniques can do the job alone, none are foolproof, and all require considerable knowledge and experience to apply correctly. Therefore, efficient siting requires a strategy which is founded on broad based application of several techniques without relying solely on one narrow field of expertise.

  6. a Radical Collaborative Approach: Developing a Model for Learning Theory, Human-Based Computation and Participant Motivation in a Rock-Art Heritage Application

    Science.gov (United States)

    Haubt, R.

    2016-06-01

    This paper explores a Radical Collaborative Approach in the global and centralized Rock-Art Database project to find new ways to look at rock-art by making information more accessible and more visible through public contributions. It looks at rock-art through the Key Performance Indicator (KPI), identified with the latest Australian State of the Environment Reports to help develop a better understanding of rock-art within a broader Cultural and Indigenous Heritage context. Using a practice-led approach the project develops a conceptual collaborative model that is deployed within the RADB Management System. Exploring learning theory, human-based computation and participant motivation the paper develops a procedure for deploying collaborative functions within the interface design of the RADB Management System. The paper presents the results of the collaborative model implementation and discusses considerations for the next iteration of the RADB Universe within an Agile Development Approach.

  7. Biopesticides: state of the art and future opportunities.

    Science.gov (United States)

    Seiber, James N; Coats, Joel; Duke, Stephen O; Gross, Aaron D

    2014-12-03

    The use of biopesticides and related alternative management products is increasing. New tools, including semiochemicals and plant-incorporated protectants (PIPs), as well as botanical and microbially derived chemicals, are playing an increasing role in pest management, along with plant and animal genetics, biological control, cultural methods, and newer synthetics. The goal of this Perspective is to highlight promising new biopesticide research and development (R&D), based upon recently published work and that presented in the American Chemical Society (ACS) symposium "Biopesticides: State of the Art and Future Opportunities," as well as the authors' own perspectives. Although the focus is on biopesticides, included in this Perspective is progress with products exhibiting similar characteristics, namely those naturally occurring or derived from natural products. These are target specific, of low toxicity to nontarget organisms, reduced in persistence in the environment, and potentially usable in organic agriculture. Progress is being made, illustrated by the number of biopesticides and related products in the registration pipeline, yet major commercial opportunities exist for new bioherbicides and bionematicides, in part occasioned by the emergence of weeds resistant to glyphosate and the phase-out of methyl bromide. The emergence of entrepreneurial start-up companies, the U.S. Environmental Protection Agency (EPA) fast track for biopesticides, and the availability of funding for registration-related R&D for biorational pesticides through the U.S. IR-4 program provide incentives for biopesticide development, but an expanded effort is warranted both in the United States and worldwide to support this relatively nascent industry.

  8. Managing Coil Epoxy Vacuum Impregnation Systems at the Manufacturing Floor Level To Achieve Ultimate Properties in State-of-the-Art Magnet Assemblies

    CERN Document Server

    Hubrig, Jeffrey G

    2005-01-01

    Liquid epoxy resin impregnation systems remain a state-of-the-art polymer material for vacuum and vacuum/pressure impregnation applications in the manufacture of both advanced and conventional coil winding configurations. Epoxy resins inherent latitude in processing parameters accounts for their continued popularity in engineering applications, but also for the tendency to overlook or misinterpret the requisite processing parameters on the manufacturing floor. Resin system impregnation must be managed in detail in order to achieve device life cycle reliability. This closer look reveals how manufacturing floor level management of material acceptance, handling and storage, pre- and post- impregnation processing and cure can be built into a manufacturing plan to increase manufacturing yield, lower unit cost and ensure optimum life cycle performance of the coil.

  9. State-of-the-art report on piping fracture mechanics

    International Nuclear Information System (INIS)

    Wilkowski, G.M.; Olson, R.J.; Scott, P.M.

    1998-01-01

    This report is an in-depth summary of the state-of-the-art in nuclear piping fracture mechanics. It represents the culmination of 20 years of work done primarily in the US, but also attempts to include important aspects from other international efforts. Although the focus of this work was for the nuclear industry, the technology is also applicable in many cases to fossil plants, petrochemical/refinery plants, and the oil and gas industry. In compiling this detailed summary report, all of the equations and details of the analysis procedure or experimental results are not necessarily included. Rather, the report describes the important aspects and limitations, tells the reader where he can go for further information, and more importantly, describes the accuracy of the models. Nevertheless, the report still contains over 150 equations and over 400 references. The main sections of this report describe: (1) the evolution of piping fracture mechanics history relative to the developments of the nuclear industry, (2) technical developments in stress analyses, material property aspects, and fracture mechanics analyses, (3) unresolved issues and technically evolving areas, and (4) a summary of conclusions of major developments to date

  10. State-of-the-art report on piping fracture mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Wilkowski, G.M.; Olson, R.J.; Scott, P.M. [Battelle, Columbus, OH (United States)

    1998-01-01

    This report is an in-depth summary of the state-of-the-art in nuclear piping fracture mechanics. It represents the culmination of 20 years of work done primarily in the US, but also attempts to include important aspects from other international efforts. Although the focus of this work was for the nuclear industry, the technology is also applicable in many cases to fossil plants, petrochemical/refinery plants, and the oil and gas industry. In compiling this detailed summary report, all of the equations and details of the analysis procedure or experimental results are not necessarily included. Rather, the report describes the important aspects and limitations, tells the reader where he can go for further information, and more importantly, describes the accuracy of the models. Nevertheless, the report still contains over 150 equations and over 400 references. The main sections of this report describe: (1) the evolution of piping fracture mechanics history relative to the developments of the nuclear industry, (2) technical developments in stress analyses, material property aspects, and fracture mechanics analyses, (3) unresolved issues and technically evolving areas, and (4) a summary of conclusions of major developments to date.

  11. Digital astrophotography the state of the art

    CERN Document Server

    Ratledge, David

    2005-01-01

    The CCD (Charge-Coupled Device) has revolutionised optical astronomy during the past 20 years, and specialised astronomical CCD cameras are now even more affordable, colour is standard, and they provide spectacular results. "Digital Astrophotography: The State of the Art", provides some examples of the best images, and gives readers hints and tips about how to get the best out of this extraordinary technology. Experts in CCD astronomy from North America and Europe have contributed to this book, illustrating their help and advice with many beautiful colour images - the book is in full colour throughout. Techniques range from using simple webcams to highly technical aspects such as supernovae patrolling. Computer processing, stacking and image-enhancement are detailed, along with many hints and tips from the experts.

  12. Augmented Reality and Mobile Learning: The State of the Art

    Science.gov (United States)

    FitzGerald, Elizabeth; Ferguson, Rebecca; Adams, Anne; Gaved, Mark; Mor, Yishay; Thomas, Rhodri

    2013-01-01

    In this paper, the authors examine the state of the art in augmented reality (AR) for mobile learning. Previous work in the field of mobile learning has included AR as a component of a wider toolkit but little has been done to discuss the phenomenon in detail or to examine in a balanced fashion its potential for learning, identifying both positive…

  13. Thermal solar energy in Spain. State of the art and objectives

    International Nuclear Information System (INIS)

    Glenn, Jaouen

    2006-01-01

    According the Kyoto protocol, Spain has to reduce its CO 2 emissions at 330 millions of tons (a decrease of 18 % from the level of 2003). From the european commission policy, the energy resources will be of 12 % of renewable energies. In this context, Spain developed an energy policy in favor of the solar energy. This document provides information on: the energy market in Spain, the thermal solar energy operating, the CO 2 emissions, the state of the art in the domain in spain, the 2010 objectives, the programs and the assistance, some data on the solar market in comparison with the Europe. (A.L.B.)

  14. Using Art to Enhance the Learning of Math and Science: Developing an Educational Art-Science Kit about Fractal Patterns in Nature

    Science.gov (United States)

    Rao, Deepa

    This study documents the development of an educational art-science kit about natural fractals, whose aim is to unite artistic and scientific inquiry in the informal learning of science and math. Throughout this research, I argue that having an arts-integrated approach can enhance the learner of science and math concepts. A guiding metaphor in this thesis is the Enlightenment-era cabinet of curiosities that represents a time when art and science were unified in the process of inquiry about the natural world. Over time, increased specialization in the practice of arts and science led to a growing divergence between the disciplines in the educational system. Recently, initiatives like STEAM are underway at the national level to integrate "Arts and Design" into the Science, Technology, Engineering, and Math (STEM) formal education agenda. Learning artifacts like science kits present an opportunity to unite artistic and scientific inquiry in informal settings. Although science kits have been introduced to promote informal learning, presently, many science kits have a gap in their design, whereby the activities consist of recipe-like instructions that do not encourage further inquiry-based learning. In the spirit of the cabinet of curiosities, this study seeks to unify visual arts and science in the process of inquiry. Drawing from educational theories of Dewey, Piaget, and Papert, I developed a novel, prototype "art-science kit" that promotes experiential, hands-on, and active learning, and encourages inquiry, exploration, creativity, and reflection through a series of art-based activities to help users learn science and math concepts. In this study, I provide an overview of the design and development process of the arts-based educational activities. Furthermore, I present the results of a pilot usability study (n=10) conducted to receive user feedback on the designed materials for use in improving future iterations of the art-science fractal kit. The fractal kit

  15. THE PRACTICAL ASPECT OF DEVELOPING ART APPRECIATION

    Directory of Open Access Journals (Sweden)

    Matjaž Duh

    2016-09-01

    Full Text Available In the present article the significance and the role of art appreciation are dealt with. The ways and procedures of developing art appreciation of pupils in primary school are presented. With the support of the procedure of gradual uncovering of an artwork, in which two different methods were employed, namely increasing the sharpness and fragmentary image, the response and experience of 14 – 15 years old pupils were investigated in this study. In this, focus was on the examination of appropriateness of the procedures according to the type of the selected artworks. The procedures were examined on two sets, namely on a set of artworks with realistically depicted motifs and on a set of abstract paintings. We have found the selected procedures were to a certain extent more appropriate for dealing with realistic motifs, and to a lesser extent for abstract motifs. For pupils it is more difficult to accept an unknown, alien image, they much more easily identify themselves with recognisable forms and motifs. The latter motivate and inspire them more; they activate communication and in consequence raise the level of the development of art appreciation.

  16. The state of the art of flood forecasting - Hydrological Ensemble Prediction Systems

    Science.gov (United States)

    Thielen-Del Pozo, J.; Pappenberger, F.; Salamon, P.; Bogner, K.; Burek, P.; de Roo, A.

    2010-09-01

    Flood forecasting systems form a key part of ‘preparedness' strategies for disastrous floods and provide hydrological services, civil protection authorities and the public with information of upcoming events. Provided the warning leadtime is sufficiently long, adequate preparatory actions can be taken to efficiently reduce the impacts of the flooding. Because of the specific characteristics of each catchment, varying data availability and end-user demands, the design of the best flood forecasting system may differ from catchment to catchment. However, despite the differences in concept and data needs, there is one underlying issue that spans across all systems. There has been an growing awareness and acceptance that uncertainty is a fundamental issue of flood forecasting and needs to be dealt with at the different spatial and temporal scales as well as the different stages of the flood generating processes. Today, operational flood forecasting centres change increasingly from single deterministic forecasts to probabilistic forecasts with various representations of the different contributions of uncertainty. The move towards these so-called Hydrological Ensemble Prediction Systems (HEPS) in flood forecasting represents the state of the art in forecasting science, following on the success of the use of ensembles for weather forecasting (Buizza et al., 2005) and paralleling the move towards ensemble forecasting in other related disciplines such as climate change predictions. The use of HEPS has been internationally fostered by initiatives such as "The Hydrologic Ensemble Prediction Experiment" (HEPEX), created with the aim to investigate how best to produce, communicate and use hydrologic ensemble forecasts in hydrological short-, medium- und long term prediction of hydrological processes. The advantages of quantifying the different contributions of uncertainty as well as the overall uncertainty to obtain reliable and useful flood forecasts also for extreme events

  17. Electron beam melting state-of-the-art 1984

    International Nuclear Information System (INIS)

    Bakish, R.

    1984-01-01

    In 1984 electron beam melting and refining appear poised for an important new growth phase. The driving force for this phase is improved production economics made possible by technological advances. There is also a new and exciting growth application for electron beam melting: its use for surface properties beneficiation. This article is based in part on the content of the Conference on Electron Beam Melting and Refining, The State-of-the-Art 1983, held in November 1983 in Reno, Nevada

  18. A state-of-the-art report on LMR structural materials

    International Nuclear Information System (INIS)

    Ryu, Woo Seog; Kuk, I. H.; Jang, J. S.; Kim, D. W.; Lee, C. K.; Kim, S. H.; Kim, W. G.; Park, S. D.; Chung, M. G.; Han, C. H.

    1998-03-01

    This state-of-the-art report is reviewed the R and D documents for designing and constructing the Monju LMR pilot plant in Japan, that has analyzed the LMR technologies and materials. This report especially has focused on the introduction in LMR systems, components, operating conditions, environmental aspects and structural materials to help understanding LMR materials research as a guide instruction. Japan had designed the Monju reactor using their own design code for high temperature analysis of LMR integrity, based on ASME Boiler and Pressure Vessel Code and Code Case N-47. A material database has been established from the test results of Japanese materials to evaluate the structural integrity in high temperature. The improved stainless steel for LMR integrity and economy has been developed in Japan and characterized to produce a database with international co-works. Mod. 9Cr-1Mo and 9Cr-2Mo steels have been developed for the heat transfer tubes in steam generator to improve the creep rupture behavior by reducing carbon content to resist welding cracks, and adding minor elements such as Nb and V to stabilize the carbide in high temperature region. The sodium environmental effects have determined that the degree of influence on high temperature properties should not be important because of reducing environment of sodium, but the quantitative analysis of the sodium effects has been studied to evaluate the long-term structural integrity during the LMR operating life. (author). 26 refs., 9 tabs., 14 figs

  19. Preface: 2nd Workshop on the State of the Art in Nuclear Cluster Physics

    International Nuclear Information System (INIS)

    Descouvemont, P.; Dufour, M.; Sparenberg, J.-M.

    2011-01-01

    The 2nd workshop on the "State of the Art in Nuclear Cluster Physics" (SOTANCP2) took place on May 25-28, 2010, at the Universite Libre de Bruxelles (Brussels, Belgium). The first workshop of this series was held in Strasbourg (France) in 2008. The purpose of SOTANCP2 was to promote the exchange of ideas and to discuss new developments in Clustering Phenomena in Nuclear Physics and Nuclear Astrophysics both from a theoretical and from an experimental point of view

  20. Demagnetization fault diagnosis in permanent magnet synchronous motors: A review of the state-of-the-art

    Energy Technology Data Exchange (ETDEWEB)

    Moosavi, S.S., E-mail: anchepoli@gmail.com [University of Technology Belfort Montbeliard (UTBM), Laboratory of IRTES-SET, Belfort (France); Engineering Department, Amol University of Special Modern Technology, Amol (Iran, Islamic Republic of); Djerdir, A. [University of Technology Belfort Montbeliard (UTBM), Laboratory of IRTES-SET, Belfort (France); Amirat, Y.Ait. [Laboratory of Femto-ST, University of Franche-Comte (France); Khaburi, D.A. [Center of Excellence for Power System Automation and Operation, Iran University of Science and Technology (IUST), Tehran (Iran, Islamic Republic of)

    2015-10-01

    There are a lot of research activities on developing techniques to detect permanent magnet (PM) demagnetization faults (DF). These faults decrease the performance, the reliability and the efficiency of permanent magnet synchronous motor (PMSM) drive systems. In this work, we draw a broad perspective on the status of these studies. The advantages, disadvantages of each method, a deeper view investigated and a comprehensive list of references are reported. - Highlights: • A review of state of the art on demagnetization fault diagnosis was studied deeply. • Critical points in fault diagnosis are discussed aiming to safety and cost management. • Critical comparison on all existent demagnetization diagnosis methods was done. • It is proved that DE and UL have the same signature frequencies as partial demagnetization. • MCSA have some limitations in frequency component under uniform demagnetization.

  1. Demagnetization fault diagnosis in permanent magnet synchronous motors: A review of the state-of-the-art

    International Nuclear Information System (INIS)

    Moosavi, S.S.; Djerdir, A.; Amirat, Y.Ait.; Khaburi, D.A.

    2015-01-01

    There are a lot of research activities on developing techniques to detect permanent magnet (PM) demagnetization faults (DF). These faults decrease the performance, the reliability and the efficiency of permanent magnet synchronous motor (PMSM) drive systems. In this work, we draw a broad perspective on the status of these studies. The advantages, disadvantages of each method, a deeper view investigated and a comprehensive list of references are reported. - Highlights: • A review of state of the art on demagnetization fault diagnosis was studied deeply. • Critical points in fault diagnosis are discussed aiming to safety and cost management. • Critical comparison on all existent demagnetization diagnosis methods was done. • It is proved that DE and UL have the same signature frequencies as partial demagnetization. • MCSA have some limitations in frequency component under uniform demagnetization

  2. State of the Art analysis for the 'SolcelleInverter' project. Optimised design and control of inverter for photovoltaic systems: the AC-module

    Energy Technology Data Exchange (ETDEWEB)

    Baekhoej Kjaer, S.

    2002-02-01

    The 'SolcelleInverter' project starts with this state-of-the-art analysis of 27 different inverter topologies for use in photovoltaic applications. The main concern is the present status for inverters for single solar modules. Technologies for larger clusters of modules are also investigated. The possibility of combining a small decentralised and a big centralised unit is as well investigated. A series of topologies are discovered and this paper will present them. That includes solutions with and without transformers, systems for one or multiple modules, commercial solutions and solutions found in scientific papers and patents. (au)

  3. Improving the state of the art in FEM analysis of PCCVs with bonded and unbonded prestress tendons

    Energy Technology Data Exchange (ETDEWEB)

    Jones, Christopher A., E-mail: cajone@sandia.gov [Sandia National Laboratories, PO Box 5800, MS 0744, Albuquerque, NM 87125-0744 (United States); Dameron, Robert, E-mail: rdameron@moffattnichol.com [Moffatt and Nichol, 1660 Hotel Cir N, San Diego, CA 92108 (United States); Sircar, Madhumita, E-mail: Madhumita.sircar@nrc.gov [U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001 (United States)

    2015-12-15

    Highlights: • A novel method for FE modeling of bonded and unbonded tendons was developed. • Bonded and unbonded tendon models were compared for use in PCCVs. • For internal overpressurization, unbonded tendons perform slightly better. • Tendon slip and load redistribution are credited for the increased performance. - Abstract: In order to assess the structural performance of grouted prestressing systems in nuclear power containment vessels, a full containment vessel was modeled using the finite element program, ABAQUS. Both bonded (grouted) and unbonded (ungrouted) prestressing systems were modeled. Prior to simulation of grouting, both models were identical, with the prestressing stages modeled explicitly, and friction represented along the tendons. The results indicate higher peak stresses and strains in the bonded model since the tendon system is not permitted to slip and redistribute forces as the vessel deforms. Correspondingly, it is noted that the analysis predicts failure of the vessel at a lower internal pressure in the case of the bonded system. This work is an extension of a collaborative study of finite element analysis (FEA) of prestressed concrete containment vessels (PCCVs) sponsored by the United States Nuclear Regulatory Commission (USNRC) and the Atomic Energy Regulatory Board (AERB) of India. Particular emphasis was placed on advancing the state of the art in modeling tendons (Akin et al., 2013a; Heitman et al., 2014).

  4. Automatic liquid handling for life science: a critical review of the current state of the art.

    Science.gov (United States)

    Kong, Fanwei; Yuan, Liang; Zheng, Yuan F; Chen, Weidong

    2012-06-01

    Liquid handling plays a pivotal role in life science laboratories. In experiments such as gene sequencing, protein crystallization, antibody testing, and drug screening, liquid biosamples frequently must be transferred between containers of varying sizes and/or dispensed onto substrates of varying types. The sample volumes are usually small, at the micro- or nanoliter level, and the number of transferred samples can be huge when investigating large-scope combinatorial conditions. Under these conditions, liquid handling by hand is tedious, time-consuming, and impractical. Consequently, there is a strong demand for automated liquid-handling methods such as sensor-integrated robotic systems. In this article, we survey the current state of the art in automatic liquid handling, including technologies developed by both industry and research institutions. We focus on methods for dealing with small volumes at high throughput and point out challenges for future advancements.

  5. Subjectivation, togetherness, environment. Potentials of participatory art for Art Education for Sustainable Development (AESD

    Directory of Open Access Journals (Sweden)

    Helene Illeris

    2017-06-01

    Full Text Available Through a process-oriented analysis of the participatory art project The Hill this article explores the relevance of participatory art projects for the development of AESD – Art Education for Sustainable Development. Inspired by Felix Guattari’s Three Ecologies (2008 the analysis moves through three sub-studies delving into three different aspects of the project. Each sub-study adopts two overlapping analytical ‘lenses’: The lens of a contemporary art form (performance art, community art, and site-specific art and the lens of a related theoretical concept (subjectivation, togetherness, environment. The aim is to propose art educational ideas and strategies that stimulate students to challenge the current political, economic and environmental situation. Central questions addressed by the article are: How can educators use contemporary artistic strategies to challenge essentialist and opportunistic self-understandings? What is the potential for participatory art forms to explore alternative and more sustainable conceptions of human subjectivity? How can art education work in favour of a sense of interconnectedness between the individual, the social and the environmental dimensions of being? In conclusion, the article proposes art education as a symbolic place for carrying out art-inspired experiments with how to live our lives in more sustainable ways.

  6. Advanced robotics for medical rehabilitation current state of the art and recent advances

    CERN Document Server

    Xie, Shane

    2016-01-01

    Focussing on the key technologies in developing robots for a wide range of medical rehabilitation activities – which will include robotics basics, modelling and control, biomechanics modelling, rehabilitation strategies, robot assistance, clinical setup/implementation as well as neural and muscular interfaces for rehabilitation robot control – this book is split into two parts; a review of the current state of the art, and recent advances in robotics for medical rehabilitation. Both parts will include five sections for the five key areas in rehabilitation robotics: (i) the upper limb; (ii) lower limb for gait rehabilitation (iii) hand, finger and wrist; (iv) ankle for strains and sprains; and (v) the use of EEG and EMG to create interfaces between the neurological and muscular functions of the patients and the rehabilitation robots. Each chapter provides a description of the design of the device, the control system used, and the implementation and testing to show how it fulfils the needs of that specific ...

  7. Recent developments and improvements in the code system for the neutronic design of fast breeder reactors at CEA

    International Nuclear Information System (INIS)

    Giacometti; Estiot, J.C.; Palmiotti, G.; Grondein, C.; Le Cardinal, G.; Ravier, M.

    1982-09-01

    The new modular system has been developed using software tools ALOS, which give effectiveness and flexibility. Second step is the application of new algorithms to improve the resolution of diffusion equation. The state of art for the realisation of the new code system is briefly described

  8. Virtual microscopy and digital cytology: state of the art.

    Science.gov (United States)

    Giansanti, Daniele; Grigioni, Mauro; D'Avenio, Giuseppe; Morelli, Sandra; Maccioni, Giovanni; Bondi, Arrigo; Giovagnoli, Maria Rosaria

    2010-01-01

    The paper approaches a new technological scenario relevant for the introduction of the digital cytology (D-CYT) in the health service. A detailed analysis of the state of the art on the status of the introduction of D-CYT in the hospital and more in general in the dispersed territory has been conducted. The analysis was conducted in a form of review and was arranged into two parts: the first part focused on the technological tools needed to carry out a successful service (client server architectures, e-learning, quality assurance issues); the second part focused on issues oriented to help the introduction and evaluation of the technology (specific training in D-CYT, health technology assessment in-routine application, data format standards and picture archiving computerized systems (PACS) implementation, image quality assessment, strategies of navigation, 3D-virtual-reality potentialities). The work enlightens future scenarios of actions relevant for the introduction of the technology.

  9. Virtual microscopy and digital cytology: state of the art

    Directory of Open Access Journals (Sweden)

    Daniele Giansanti

    2010-06-01

    Full Text Available The paper approaches a new technological scenario relevant for the introduction of the digital cytology (D-CYT in the health service. A detailed analysis of the state of the art on the status of the introduction of D-CYT in the hospital and more in general in the dispersed territory has been conducted. The analysis was conducted in a form of review and was arranged into two parts: the first part focused on the technological tools needed to carry out a successful service (client server architectures, e-learning, quality assurance issues; the second part focused on issues oriented to help the introduction and evaluation of the technology (specific training in D-CYT, health technology assessment in-routine application, data format standards and picture archiving computerized systems (PACS implementation, image quality assessment, strategies of navigation, 3D-virtual-reality potentialities. The work enlightens future scenarios of actions relevant for the introduction of the technology.

  10. State-of-the-Art for Small Satellite Propulsion Systems

    Science.gov (United States)

    Parker, Khary I.

    2016-01-01

    SmallSats are a low cost access to space with an increasing need for propulsion systems. NASA, and other organizations, will be using SmallSats that require propulsion systems to: a) Conduct high quality near and far reaching on-orbit research and b) Perform technology demonstrations. Increasing call for high reliability and high performing for SmallSat components. Many SmallSat propulsion technologies are currently under development: a) Systems at various levels of maturity and b) Wide variety of systems for many mission applications.

  11. Latin American Art Music in the Music History Curriculum: Taking Stock in the United States

    Directory of Open Access Journals (Sweden)

    Carol A. Hess

    2016-12-01

    Full Text Available This essay surveys the teaching of Latin American art music in U.S. post-secondary education from the 1930s to the present. After a rush of enthusiasm during the Good Neighbor period (World War II, decades of indifference set in. After 2000, an increasing number of instructors began either (1 teaching the art music of Latin America in courses dedicated to all types of Latin America music or (2 incorporating the subject into existing courses on Western art music. Yet many instructors still omit Latin American art music, as do certain authors. In this essay, I question such a stance. Not only does Latin American art music offer a window into Latin American culture but it can help counteract persistent stereotypes about Latin America, a perspective that is all the more critical in light of recent demographic trends in the United States and recent political developments.

  12. PRA: an evaluation of state-of-the-art

    International Nuclear Information System (INIS)

    Joksimovich, V.

    1985-01-01

    Some elements of the probabilistic risk assessment (PRA) methodology can be characterized as mature and are even ready for some kind of a standardization effort. Other elements are still, however, in a rapid state of evolution. Questions are continuously being asked regarding maturity of PRA techniques vis-a-vis a regulatory decision-making process. Establishing a framework for evaluating state-of-the-art in any technological field is a challenging task. An implementation of a selected framework to a satisfactory conclusion is a monumental task. Of course, these types of issues can be discussed meaningfully only if they are tied to a particular application. The author's participation in the NSF-sponsored risk assessment project is discussed in the paper. The evaluation employed here makes use of the following five evaluation criteria: logical soundness, completeness, accuracy, acceptability, and practicality

  13. Mechanical Ventilation: State of the Art.

    Science.gov (United States)

    Pham, Tài; Brochard, Laurent J; Slutsky, Arthur S

    2017-09-01

    Mechanical ventilation is the most used short-term life support technique worldwide and is applied daily for a diverse spectrum of indications, from scheduled surgical procedures to acute organ failure. This state-of-the-art review provides an update on the basic physiology of respiratory mechanics, the working principles, and the main ventilatory settings, as well as the potential complications of mechanical ventilation. Specific ventilatory approaches in particular situations such as acute respiratory distress syndrome and chronic obstructive pulmonary disease are detailed along with protective ventilation in patients with normal lungs. We also highlight recent data on patient-ventilator dyssynchrony, humidified high-flow oxygen through nasal cannula, extracorporeal life support, and the weaning phase. Finally, we discuss the future of mechanical ventilation, addressing avenues for improvement. Copyright © 2017 Mayo Foundation for Medical Education and Research. Published by Elsevier Inc. All rights reserved.

  14. Mining Tacitus: secrets of empire, nature and art in the reason of state.

    Science.gov (United States)

    Keller, Vera

    2012-06-01

    A new political practice, the 'reason of state', informed the ends and practices of natural study in the late sixteenth century. Informed by the study of the Roman historian Tacitus, political writers gathered 'secrets of empire' from both history and travel. Following the economic reorientation of 'reason of state' by Giovanni Botero (1544-1617), such secrets came to include bodies of useful particulars concerning nature and art collected by an expanding personnel of intelligencers. A comparison between various writers describing wide-scale collections, such as Botero, Francis Bacon (1561-1626), Jakob Bornitz (1560-1625) and Matthias Bernegger (1582-1640), reveals that seventeenth-century natural intelligencers across Europe not only were analogous to political intelligencers, but also were sometimes one and the same. Those seeking political prudence cast themselves as miners, prying precious particulars from the recesses of history, experience and disparate disciplines, including mathematics, alchemy and natural philosophy. The seventeenth-century practice of combining searches for secrets of empire, nature and art contests a frequent historiographical divide between empirical science and Tacitism or reason of state. It also points to the ways political cunning shaped the management of information for both politics and the study of nature and art.

  15. A state-of-the-art review of recent advances in supercritical natural circulation loops for nuclear applications

    International Nuclear Information System (INIS)

    Sarkar, Milan K.S.; Tilak, Abhilash K.; Basu, Dipankar N.

    2014-01-01

    Highlights: • Review of state-of-the-art on supercritical natural circulation loops. • Summarization of steady-state thermalhydraulic behavior for nuclear applications. • Survey of non-linear and linear stability analyses and parametric effects. • Details of experimental investigations and critical findings form each. • Emphasis on need of further experimentation in future. - Abstract: The concept of supercritical natural circulation loop (SCNCL) is an important inclusion in Generation-IV nuclear reactors. Use of supercritical fluids promises a simplified design, along with higher thermal efficiency for heat transport systems. Characteristics of such loops are markedly different from its single-phase and two-phase counterparts, while carrying quite a few similarities with both as well. Therefore significant number of research studies is carried out on SCNCL in the present millennium and current work presents a state-of-the-art summary of all associated observations. Most of the reported studies are theoretical in nature, with only a limited number of experimental works being reported. A number of indigenous computation codes were developed, while use of commercial software can also be found. Thermal–hydraulic and heat transfer aspects are discussed in details, showing the gradual growth of knowledge and comprehending the influence of various geometric and operating variables on steady-state profile. Water and carbon dioxide are identified as the only fluids considered for analysis both numerically and experimentally. Both time-domain and frequency-domain approach of stability analysis are discussed meticulously. Available experimental works are described, with exhaustive discussion on the novelty of the concerned facility and major observations. Finally a few topics are ear-marked as the possible guidelines for future research

  16. Methodologies and applications for critical infrastructure protection: State-of-the-art

    International Nuclear Information System (INIS)

    Yusta, Jose M.; Correa, Gabriel J.; Lacal-Arantegui, Roberto

    2011-01-01

    This work provides an update of the state-of-the-art on energy security relating to critical infrastructure protection. For this purpose, this survey is based upon the conceptual view of OECD countries, and specifically in accordance with EU Directive 114/08/EC on the identification and designation of European critical infrastructures, and on the 2009 US National Infrastructure Protection Plan. The review discusses the different definitions of energy security, critical infrastructure and key resources, and shows some of the experie'nces in countries considered as international reference on the subject, including some information-sharing issues. In addition, the paper carries out a complete review of current methodologies, software applications and modelling techniques around critical infrastructure protection in accordance with their functionality in a risk management framework. The study of threats and vulnerabilities in critical infrastructure systems shows two important trends in methodologies and modelling. A first trend relates to the identification of methods, techniques, tools and diagrams to describe the current state of infrastructure. The other trend accomplishes a dynamic behaviour of the infrastructure systems by means of simulation techniques including systems dynamics, Monte Carlo simulation, multi-agent systems, etc. - Highlights: → We examine critical infrastructure protection experiences, systems and applications. → Some international experiences are reviewed, including EU EPCIP Plan and the US NIPP programme. → We discuss current methodologies and applications on critical infrastructure protection, with emphasis in electric networks.

  17. Art Therapy. Prevention Against the Development of Depression

    DEFF Research Database (Denmark)

    Skov, Vibeke

    2013-01-01

    as a mixed-methods design, with the quantitative part imbedded in the qualitative part. Seven participants were chosen to participate in an art therapy group during a 6-month intervention with a total of 13 meetings. The inclusion criteria were identification of mild to moderate depression based on the test......The aim in this research study was to focus on art therapy as a method to explore the inner life as prevention against the development of depression and to address the possibility for art therapy to be used as an early intervention tool related to depression. A Jungian epistemology was used...... as a frame for the overall understanding of well-being together with a holistic approach, including the biological, psychological, social and spiritual domains in life. Art therapy processes in the clinical part of the study aimed to include all these levels as the activation of these are considered...

  18. Solid State Lighting Reliability Components to Systems

    CERN Document Server

    Fan, XJ

    2013-01-01

    Solid State Lighting Reliability: Components to Systems begins with an explanation of the major benefits of solid state lighting (SSL) when compared to conventional lighting systems including but not limited to long useful lifetimes of 50,000 (or more) hours and high efficacy. When designing effective devices that take advantage of SSL capabilities the reliability of internal components (optics, drive electronics, controls, thermal design) take on critical importance. As such a detailed discussion of reliability from performance at the device level to sub components is included as well as the integrated systems of SSL modules, lamps and luminaires including various failure modes, reliability testing and reliability performance. This book also: Covers the essential reliability theories and practices for current and future development of Solid State Lighting components and systems Provides a systematic overview for not only the state-of-the-art, but also future roadmap and perspectives of Solid State Lighting r...

  19. Gas-steam combined cycles for power generation: Current state-of-the-art and future prospects

    International Nuclear Information System (INIS)

    Macchi, E.; Chiesa, P.; Consonni, S.; Lozza, G.

    1992-01-01

    The first part of this paper points out the many factors which, after years of stagnation in the electric power industry, are giving rise to a true revolution in power generation engineering: the passing from closed cycles, using steam as the working fluid and energy sources external to the power cycle, to the use of open cycles, in which the primary energy source, in the form of a fuel, is directly immersed in the working fluid of the engine. Attention is given to the advantages in terms of energy and cost savings, greater flexibility in energy policy options and pollution abatement which are now being afforded through the use of gas turbines with combined gas-steam cycles. The second part of the paper deals with an assessment of the current state-of-the-art of the technology relative to these innovative power systems. The assessment is followed by a review of foreseen developments in combined cycle system design, choice of construction materials, type of cooling systems, operating temperatures and performance capabilities

  20. The Development of Innovation Systems as an Object with the State Regulation

    OpenAIRE

    Melnyk Alexander G.

    2017-01-01

    The article examines the processes of structuring the environment for the development of innovation systems in terms of the formation of a State regulated object. A methodological approach to definition of the State regulation at the primary, secondary and tertiary levels of structuring the environment of innovation systems has been suggested, based on the premise of the objective nature of the integration of social environment and market mechanisms into the structure of an object with the St...

  1. Thermoluminescence dosimetry: State-of-the-art and frontiers of future research

    International Nuclear Information System (INIS)

    Horowitz, Y.S.

    2014-01-01

    The state-of-the-art in the use of thermoluminescence for the measurement of energy imparted by ionizing radiation is discussed. Emphasis is on the advantages obtainable by the use of computerized glow curve analysis in (i) quality control, (ii) low dose environmental dosimetry, (iii) medical applications (especially precision) and microdosimetric applications, and (iv) mixed field ionization-density–dosimetry. Possible frontiers of future research are highlighted: (i) vector representation in glow curve analysis, (ii) combined OSL/TL measurements, (iii) detection of sub-ionization electrons, (iv) requirements for new TL materials and (v) theoretical subjects involving kinetic modeling invoking localized/delocalized recombination applied to dose response and track structure theory including creation of defects. - Highlights:: • State of the art in thermoluminescence dosimetry. • Benefits of computerized glow curve deconvolution. • Frontiers of future research:new materials, mixed-field dosimetry. • Localized/delocalized kinetic theory:ionization density dependence. • Kinetic theory:creation of defects:track structure theory

  2. Making Art Pedagogy in the System of Education in the Republic of Kazakhstan

    Science.gov (United States)

    Almukhambetov, Berikzhan A.; Nebessayeva, Zhanar O.; Smanova, Akmaral S.; Kakimova, Laura S.; Musakulov, Kusan T.; Sydykova, Roza S.

    2016-01-01

    The article reveals the importance of art pedagogy, art pedagogy through understanding the history of Kazakh art. The paper provides definitions of potential art of Kazakhstan and its role in the educational system of the university. It describes the main purpose of art teaching through the formation of ethnic and cultural identity of the student…

  3. Approach to a State of the Art of Traditional and Popular Medicinal Practices in Hispano-American

    Directory of Open Access Journals (Sweden)

    Omar Alberto Garzón Chirivi

    2015-04-01

    Full Text Available DOI: http://dx.doi.org/10.17227/01234870.41folios157.168 This article presents a state of the art of academic production concerning traditional and popular medicine in Latin America. It analyzes the relation between studies on chamanismo (the art of medicine men in indigenous communities in some Spanish-speaking countries (Colombia, Peru, Bolivia, Mexico, Spain and studies on curanderismo (the art of healers in urban contexts and evidences recurring elements of a magical, religious and medical kind in their therapeutic practices. Likewise, it shows the changes in the understanding of these systems of treatment and assistance to health and sickness, their permanence and incidence on collective practices associated to spirituality, as well as the construction of alternatives of individual and social health and the interdisciplinary character of the existing research studies. This article, too, proposes the existence of an analytical vacuum regarding gender, class and ethnic group in the studies on traditional and popular medicine.

  4. Fluidelastic vibration of cylinder arrays in axial and cross flow--state of the art

    International Nuclear Information System (INIS)

    Paidoussis, M.P.

    1981-01-01

    A critical assessment of the state of the art for flow-induced vibrations of cylinder arrays in cross and axial flow is presented. An historical review highlights the contributions which advanced understanding of the flow-induced vibration phenomena involved and/or predictive ability. In the case of axial-flow-induced vibration, the absence of separated flow regions has contributed towards the development of analytical predictive tools. The designer may predict the onset of fluidelastic instabilities, which generally occur at very high flow velocities, with greater confidence. In contrast, in the case of cross-flow-induced vibration, the complexity of the flow has encouraged more heuristic approaches to be adopted. The state of the art in this case is discussed with the aid of a new classification of the flow-induced vibration phenomena involved, to unify and clarify the contradictory claims facing the designer. It is concluded that, although the physical understanding of cross-flow-induced vibration phenomena is not good, useful design guidelines do exist. These are capable of predicting vibration characteristics to within a factor of 2 to 10. A comprehensive bibliography is included. 115 refs

  5. Neutron personal dosimetry: state-of-art

    International Nuclear Information System (INIS)

    Spurný, František

    2005-03-01

    State-of-art of the personal neutron dosimetry is presented, analysed and discussed. Particular attention is devoted to the problems of this type of the dosimetry of external exposure for radiation fields at nuclear power plants. A review of general problems of neutron dosimetry is given and the active individual dosimetry methods available and/or in the stage of development are briefly reviewed. Main attention is devoted to the analysis of the methods available for passive individual neutron dosimetry. The characteristics of these dosemeters were studied and are compared: their energy response functions, detection thresholds and the highest detection limits, the linearity of response, the influence of environmental factors, etc. Particular attention is devoted to their behavior in reactor neutron fields. It is concluded that the choice of the neutron personal dosemeter depends largely on the conditions in which the instrument should be used (neutron spectrum, the level of exposure and the exposure rate, etc.). The results obtained with some of these dosemeters during international intercomparisons are also presented. Particular attention is paid to the personal neutron dosimeter developed and routinely used by National Personal Dosimetry Service Ltd. in the Czech Republic. (author)

  6. The study of urban systems by indicators. State of the art and implementation problems; Lo studio dei sistemi urbani attraverso indicatori. Stato dell'arte e problematiche operative

    Energy Technology Data Exchange (ETDEWEB)

    Del Ciello, R; Napoleoni, S [ENEA, Divisione Caratterizzazione dell' Ambiente e del Territorio, Centro Ricerche Casaccia, S. Maria di Galeria, RM (Italy)

    2001-07-01

    The purpose of this work is to define the state of the art about the problem of the indicators and their capability in reading and foreseeing the urban complexity. Therefore, the theoretical elaborations and the suggestions developed in the report try to convert the different contributions in the Italian and international literature in a frame-work, focusing on those arguments which assume a key role in the study of the urban areas: (a) the problematic definition of the administrative, physics and functional boarders of the cities; (b) the selection of the indicators that describe the urban areas; (c) the description and quality of life and of environment quality in the cities; (d) the sustainability in urban areas. [Italian] Il lavoro si propone di delineare lo stato dell'arte sul problema degli indicatori e sulla loro capacita' di leggere e prevedere la complessita' urbana. Le elaborazioni teoriche e i suggerimenti metodologici sviluppati nel rapporto tentano dunque di tradurre in protocolli di lavoro i diversi contributi prodotti negli ultimi anni nella letteratura italiana e internazionale concentrando in particolare l'attenzione su quei temi che all'interno dello studio dei sistemi urbani assumono un ruolo chiave: (a) la problematica definizione dei confini amministrativi, fisici e funzionali delle citta'; (b) la selezione degli indicatori che descrivono con piu' efficacia il sistema urbano; (c) le dimensioni e la misura della qualita' della vita e dell'ambiente nelle citta'; (d) la sostenibilita' all'interno dei sistemi urbani.

  7. State of the Art on Alternative Fuels in Aviation. Executive summary

    NARCIS (Netherlands)

    Blakey, S.; Novelli, P.; Costes, P.; Bringtown, S.; Christensen, D.; Sakintuna, B.; Peineke, C.; Jongschaap, R.E.E.; Conijn, J.G.; Rutgers, B.; Valot, L.; Joubert, E.; Perelgritz, J.F.; Filogonio, A.; Roetger, T.; Prieur, A.; Starck, L.; Jeuland, N.; Bogers, P.; Midgley, R.; Bauldreay, J.; Rollin, G.; Rye, L.; Wilson, C.

    2010-01-01

    This paper summarises the findings from the SWAFEA preliminary state of the art study. It covers trends in aspects of future air transport, potential candidate fuels and associated feedstock along with sustainability and economical issues relevant for alternative fuels in aviation..

  8. Cultivating Demand for the Arts: Arts Learning, Arts Engagement, and State Arts Policy

    Science.gov (United States)

    Zakaras, Laura; Lowell, Julia F.

    2008-01-01

    To shed light on the decline in demand for the nonprofit arts, the authors describe what it means to cultivate demand for the arts, examine how well U.S. institutions are serving this function, and discuss whether it is in the public interest to make such cultivation a higher priority than it has been in the past. The authors propose that a strong…

  9. IEC planning: eight state-of-the-art principles.

    Science.gov (United States)

    Middleton, J

    1983-12-01

    Considerable experience and research has been accumulated in the last 20 years on the ways in which information/education/communication (IEC) programs can be effectively designed, implemented, and evaluated. Possibly more effort has focused on population and family planning IEC than on any other sectoral program of development communication. Several principles have emerged which, taken together, define the state of the art in the field. These principles provide a framework of experience which can guide the development of comprehensive IEC programs. They include: policy and resource assessment; audience analysis; strategy design; message research and pretesting; participation and feedback; management; evaluation; and collaboration. The nature of the national policy base for population and family planning programs will determine the goals and approaches of the IEC program. Strong policies of limitation on popultion growth lead to equally strong and pervasive IEC efforts designed to directly affect contraceptive behavior. Assessment of existing policy is an essential aspect of the design of an effective IEC program. Policies establish the rationale and boundaries for action. Population and family planning programs are concerned with some of the most intimate human behavior. Consequently, structured and sensitive audience analysis has become an integral part of the design of IEC programs. The design of communication strategy requires clearly stated objectives. Principles of human learning are used to structure information appropriately. Message research and pretesting have become integral components of the strategy design process. Small scale research on specific objectives is necessary to establish the basis for message design. Audience participation and feedback in remaining phases of program development and implementation are important. The management of an IEC program requires a specific combination of planning, flexibility, and creativity. Evaluation of program

  10. The Transrapid test facility between system development and system application

    Energy Technology Data Exchange (ETDEWEB)

    Baur, L [MVP GmbH, Muenchen (Germany)

    1996-12-31

    In the development of a new rail technology, such as the magnetic levitation, there is - in contrast to the further development of the railway technology - not the possibility to use existing routes for the technical verification of the system technology until the application. Instead of this there are two possibilities: Cost-effective preliminary development on test beds and small test facilities up to a development stage which justifies the (relatively serious) risk of realising a service route early and to conclude the system trials and verification there; cost-intensive construction of a large-scale test facility which permits an application-related verification of all important system functions and thus creates the technical pre-requisites for a low-risk system application; The presentation deals with the technical requirements of the system at the test facility the challenges and chances linked to its realisation and adjustment to the rapidly progressing state-of-the-art and which this way opens up for a minimisation of the technical application risk. (orig./HW)

  11. A-State-of-the-Art Report on Application of Radiation Technology to Environmental Pollution Control

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Kwang; Lee, Myun Joo

    2004-06-15

    Radiation technology has been rapidly developed for decades and its applicability also enlarged to many fields such as environmental protection, medical care, manufacturing industry, agriculture, and bio technology. In this report, we focused on the present situation of the development of radiation facilities and state-of-the-art on application of radiation to environmental pollution control including purification of flue gas, waste water treatment, and recycling of biological waste. We especially discussed the radiation technology for environmental pollution control and described the capability of its application to the industrial plants in Korea.

  12. Stratification issues in the primary system. Review of available validation experiments and State-of-the-Art in modelling capabilities (StratRev)

    International Nuclear Information System (INIS)

    Westin, J.; Henriksson, M.; Paettikangas, T.; Toppila, T.; Raemae, T.; Kudinov, P.; Anglart, H.

    2009-08-01

    The objective of the present report is to review available validation experiments and State-of-the-Art in modelling of stratification and mixing in the primary system of Light Water Reactors. A topical workshop was arranged in Aelvkarleby in June 2008 within the framework of BWR-OG, and the presentations from various utilities showed that stratification issues are not unusual and can cause costly stops in the production. It is desirable to take actions in order to reduce the probability for stratification to occur, and to develop well-validated and accepted tools and procedures for analyzing upcoming stratification events. A research plan covering the main questions is outlined, and a few suggestions regarding more limited research activities are given. Since many of the stratification events results in thermal loads that are localized in time and space, CFD is a suitable tool. However, the often very large and complex geometry posses a great challenge to CFD, and it is important to perform a step-by-step increase in complexity with intermediate validation versus relevant experimental data. The ultimate goal is to establish Best Practice Guidelines that can be followed both by utilities and authorities in case of an event including stratification and thermal loads. An extension of the existing Best Practice Guidelines for CFD in nuclear safety applications developed by OECD/NEA is thus suggested as a relevant target for a continuation project. (au)

  13. Stratification issues in the primary system. Review of available validation experiments and State-of-the-Art in modelling capabilities (StratRev)

    Energy Technology Data Exchange (ETDEWEB)

    Westin, J.; Henriksson, M. (Vattenfall Research and Development AB (Sweden)); Paettikangas, T. (VTT (Finland)); Toppila, T.; Raemae, T. (Fortum Nuclear Services Ltd (Finland)); Kudinov, P. (KTH Nuclear Power Safety (Sweden)); Anglart, H. (KTH Nuclear Reactor Technology (Sweden))

    2009-08-15

    The objective of the present report is to review available validation experiments and State-of-the-Art in modelling of stratification and mixing in the primary system of Light Water Reactors. A topical workshop was arranged in AElvkarleby in June 2008 within the framework of BWR-OG, and the presentations from various utilities showed that stratification issues are not unusual and can cause costly stops in the production. It is desirable to take actions in order to reduce the probability for stratification to occur, and to develop well-validated and accepted tools and procedures for analyzing upcoming stratification events. A research plan covering the main questions is outlined, and a few suggestions regarding more limited research activities are given. Since many of the stratification events results in thermal loads that are localized in time and space, CFD is a suitable tool. However, the often very large and complex geometry posses a great challenge to CFD, and it is important to perform a step-by-step increase in complexity with intermediate validation versus relevant experimental data. The ultimate goal is to establish Best Practice Guidelines that can be followed both by utilities and authorities in case of an event including stratification and thermal loads. An extension of the existing Best Practice Guidelines for CFD in nuclear safety applications developed by OECD/NEA is thus suggested as a relevant target for a continuation project. (au)

  14. Solar water detoxification: state of the art of the research in Spain; Detoxificacion solar de aguas residuales y desinfeccion: estado actual de la investigacion en Espana

    Energy Technology Data Exchange (ETDEWEB)

    Perez Martinez, M.; Cuesta Santianes, J.; Cabrera Jimenez, J. A.; Garcia Garcia, D.; Trevino Sanchez, A. C.; Berges Garcia, A.

    2010-07-01

    The CIEMAT's Foresight and Technology Watch Unit, whose technology watch management system is certified by Aenor as per standards UNE 16006:2006, has developed this study in order to review the state of the art of national research on solar water detoxification. to reach this goal, data bases of scientific publications, research projects and patents have been used. The technology watch information management solution VICUBO, developed by E-intelligent, was used as support tool for the afore-mentioned standard. (Author) 3 refs.

  15. Transit Car Performance Comparison, State-of-the-Art Car vs. PATCO Transit Car, NYCTA R-46, MBTA Silverbirds

    Science.gov (United States)

    1978-02-01

    The first phase of this contract authorized the design, development, and demonstration of two State-Of-The-Art Cars (SOAC). This document reports on the gathering of comparative test data on existing in-service transit cars. The three transit cars se...

  16. Artvision: State Arts Plan, 2009-2011

    Science.gov (United States)

    South Dakota Arts Council, 2010

    2010-01-01

    The South Dakota Legislature, being aware of the impact of culture on a stable economy, desires to stimulate, encourage, and give recognition and assistance to the arts which, in order to grow and flourish, depend upon freedom, imagination and individual initiative. While the development of the arts has long been considered a matter of local…

  17. Life cycle impacts and costs of photovoltaic systems: Current state of the art and future outlooks

    International Nuclear Information System (INIS)

    Raugei, Marco; Frankl, Paolo

    2009-01-01

    The photovoltaic energy sector is rapidly expanding and technological specification for PV has improved dramatically in the last two decades. This paper sketches the current state of the art and drafts three alternative scenarios for the future, in terms of costs, market penetration and environmental performance. According to these scenarios, if economic incentives are supported long enough into the next ten to twenty years, PV looks set for a rosy future, and is likely to play a significant role in the future energy mix, while at the same time contributing to reduce the environmental impact of electricity supply. (author)

  18. Life cycle impacts and costs of photovoltaic systems: Current state of the art and future outlooks

    Energy Technology Data Exchange (ETDEWEB)

    Raugei, Marco [Environmental Management Research Group, Escola Superior de Commerc Internacional-Universitat Pompeu Fabra, Passeig Pujades 1, 08003 Barcelona (Spain); Frankl, Paolo [Renewable Energy Unit, International Energy Agency, Rue de la Federation 9, 75739 Paris Cedex 15 (France)

    2009-03-15

    The photovoltaic energy sector is rapidly expanding and technological specification for PV has improved dramatically in the last two decades. This paper sketches the current state of the art and drafts three alternative scenarios for the future, in terms of costs, market penetration and environmental performance. According to these scenarios, if economic incentives are supported long enough into the next ten to twenty years, PV looks set for a rosy future, and is likely to play a significant role in the future energy mix, while at the same time contributing to reduce the environmental impact of electricity supply. (author)

  19. ARTS - adaptive runtime system for massively parallel systems. Final report; ARTS - optimale Ausfuehrungsunterstuetzung fuer komplexe Anwendungen auf massiv parallelen Systemen. Teilprojekt: Parallele Stroemungsmechanik. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Gentzsch, W.; Ferstl, F.; Paap, H.G.; Riedel, E.

    1998-03-20

    In the ARTS project, system software has been developed to support smog and fluid dynamic applications on massively parallel systems. The aim is to implement and test specific software structures within an adaptive run-time system to separate the parallel core algorithms of the applications from the platform independent runtime aspects. Only slight modifications is existing Fortran and C code are necessary to integrate the application code into the new object oriented parallel integrated ARTS framework. The OO-design offers easy control, re-use and adaptation of the system services, resulting in a dramatic decrease in development time of the application and in ease of maintainability of the application software in the future. (orig.) [Deutsch] Im Projekt ARTS wird Basissoftware zur Unterstuetzung von Anwendungen aus den Bereichen Smoganalyse und Stroemungsmechanik auf massiv parallelen Systemen entwickelt und optimiert. Im Vordergrund steht die Erprobung geeigneter Strukturen, um systemnahe Funktionalitaeten in einer Laufzeitumgebung anzusiedeln und dadurch die parallelen Kernalgorithmen der Anwendungsprogramme von den plattformunabhaengigen Laufzeitaspekten zu trennen. Es handelt sich dabei um herkoemmlich strukturierten Fortran-Code, der unter minimalen Aenderungen auch weiterhin nutzbar sein muss, sowie um objektbasiert entworfenen C-Code, der die volle Funktionalitaet der ARTS-Plattform ausnutzen kann. Ein objektorientiertes Design erlaubt eine einfache Kontrolle, Wiederverwendung und Adaption der vom System vorgegebenen Basisdienste. Daraus resultiert ein deutlich reduzierter Entwicklungs- und Laufzeitaufwand fuer die Anwendung. ARTS schafft eine integrierende Plattform, die moderne Technologien aus dem Bereich objektorientierter Laufzeitsysteme mit praxisrelevanten Anforderungen aus dem Bereich des wissenschaftlichen Hoechstleistungsrechnens kombiniert. (orig.)

  20. Trends in Mobile Computing: State-of-the-Art and Next Steps

    CERN Document Server

    CERN. Geneva

    2006-01-01

    Computing is moving to the edge of the network. It is becoming increasingly personal and allowing people to enjoy and express themselves in unprecedented ways. The same development allows professionals and enterprises to increase quality and productivity through improved mobility. The seminar discusses the underlying technical and societal trends and the state-of-the-art of mobile computing. Examples of current developments include the transformation of mobile devices into servers, augmented reality in mobile devices and the opportunities offered by wireless sensor networks. The fusion of the physical and digital worlds enabled by mobile computing is driving industry and society to adopt new uses of digital technologies and causing the focus of development to shift from hardware products to new services. Bio:Since 2004 Prof. Jan Bosch is working as Vice President and Head of the Software and Application Technology Laboratory of Nokia Research Centre in Helsinki, Finland. The Software & Application Tec...

  1. State-of-the-art techniques for inventory of Great Lakes aquatic habitats and resources

    Science.gov (United States)

    Edsall, Thomas A.; Brock, R.H.; Bukata, R.P.; Dawson, J.J.; Horvath, F.J.; Busch, W.-Dieter N.; Sly, Peter G.

    1992-01-01

    This section of the Classification and Inventory of Great Lakes Aquatic Habitat report was prepared as a series of individually authored contributions that describe, in various levels of detail, state-of-the-art techniques that can be used alone or in combination to inventory aquatic habitats and resources in the Laurentian Great Lakes system. No attempt was made to review and evaluate techniques that are used routinely in limnological and fisheries surveys and inventories because it was felt that users of this document would be familiar with them.

  2. Examining the Impact of Art-Based Anchor Charts on Academic Achievement in Language Arts

    Science.gov (United States)

    Fontanez, Kimberly

    2017-01-01

    The students at 2 middle schools in County SD, NHMS and WMS are not scoring on or above grade level on the information text portion of the English Language Arts (ELA) standardized SC Palmetto Assessment of State Standards (SCPASS) test given annually in South Carolina. The teachers developed and implemented art-based anchor charts to help close…

  3. [Health professionals facing hand hygiene improvement: state-of-the-art strategies versus extended strategies].

    Science.gov (United States)

    Herrera-Usagre, Manuel; Pérez-Pérez, Pastora; Vázquez-Vázquez, Marta; Santana-López, Vicente

    2014-10-01

    The hand hygiene (HH) is one of the preventive practices more .widely and effectively implemented in the control of healthcare associated infections. However, there are several barriers to compliance. To assess which strategy, state-of-the-art strategies (availability of alcohol-based preparations, posters, instructions and training) or extended strategies (feedbacks, formal and informal leadership), are seen as more effective to improve hand hygiene (HH) compliance. Analytical study using a self-completed questionnaire developed by the World Health Organization. 2,068 questionnaires, completed by healthcare professionals (HP) in Andalusia (Spain), were received from 2010 to 2012. Analytical technique: Structural equation modeling and multi group measurement invariance. Once the reliability of the proposed constructs was achieved (Cronbach α=0.73, 0.84, 0.70), it was found that those HP working in centers with the highest level of commitment with HH are those who see extended strategies as more effective (χ2=298.3, df=39, CFI=0.972, TLI=0.961, RMSEA=0.057, SRMR=0.028). Our results have shown that hospitals' HP, compared to primary care HP, see state-of-the-art strategies as more effective, as well as they give less importance to HH, meanwhile nurses, compared to physicians, see effective both strategies. HP contemplate the combination of state-of-the-art and extended strategies as an effective way to improve the HH compliance. In addition, extended strategies are considered more effective amongst the most "advanced" healthcare settings in terms of their commitment to HH. The results highlight the need for commitment at management, collective and individual level in order to maintain patient safety.

  4. Analysis and simulation of emergency departments: state of the art and prospects

    OpenAIRE

    Vanbrabant, Lien; Braekers, Kris; Ramaekers, Katrien

    2017-01-01

    This abstract gives a brief overview of the state of the art on the analysis and simulation of emergency departments in hospitals. Based on this, research opportunities which will be addressed during my PhD are identified.

  5. Performance Measurement in Belgian Hospitals : a state-of-the-art

    OpenAIRE

    Van Caillie, Didier; Rouhana, Rima; Santin, Sarah

    2007-01-01

    This communication proposes a global state-of-the-art around the central question : "How is performance measured and controlled in Belgian hospitals. As a first step in a global research project dedicated to the use of Balanced ScoreCard in publics hospitals around the world, it is essentially focused on global economic aspects and on major macroeconomic statistics.

  6. Proceedings of B Factories, the state of the art in accelerators, detectors and physics

    International Nuclear Information System (INIS)

    Hitlin, D.

    1992-11-01

    The conference B Factories, The State of the Art in Accelerators, Detectors and Physics was held at Stanford Linear Accelerator Center on April 6-10, 1992. The guiding principle of the conference was to bring together accelerator physicists and high energy experimentalists and theorists at the same time, with the goal of encouraging communication in defining and solving problems in a way which cut across narrow areas of specialization. Thus the conference was, in large measure, two distinct conferences, one involving accelerator specialists, the other theorists and experimentalists. There were initial and closing plenary sessions, and three separate tracks of parallel sessions, called Accelerator, Detector/Physics and Joint Interest sessions. This report contains the papers of this conference, the general topics of these cover: vacuum system, lattice design, beam-beam interactions, rf systems, feedback systems, measuring instrumentation, the interaction region, radiation background, particle detectors, particle tracking and identification, data acquisition, and computing system, and particle theory

  7. Proceedings of B Factories, the state of the art in accelerators, detectors and physics

    Energy Technology Data Exchange (ETDEWEB)

    Hitlin, D. (ed.) (California Inst. of Tech., Pasadena, CA (United States))

    1992-11-01

    The conference B Factories, The State of the Art in Accelerators, Detectors and Physics was held at Stanford Linear Accelerator Center on April 6-10, 1992. The guiding principle of the conference was to bring together accelerator physicists and high energy experimentalists and theorists at the same time, with the goal of encouraging communication in defining and solving problems in a way which cut across narrow areas of specialization. Thus the conference was, in large measure, two distinct conferences, one involving accelerator specialists, the other theorists and experimentalists. There were initial and closing plenary sessions, and three separate tracks of parallel sessions, called Accelerator, Detector/Physics and Joint Interest sessions. This report contains the papers of this conference, the general topics of these cover: vacuum system, lattice design, beam-beam interactions, rf systems, feedback systems, measuring instrumentation, the interaction region, radiation background, particle detectors, particle tracking and identification, data acquisition, and computing system, and particle theory.

  8. Egg Yolk Antibodies, State of the Art and Future Prospects.

    Science.gov (United States)

    Schade, Rüdiger; Hlinak, Andreas

    1996-01-01

    Immunization of chickens and extraction of antibodies from egg yolk belongs to the alternative methods since the animals suffering is reduced by non-invasive antibody-sampling. Also, the number of animals needed to produce a certain amount of antibody can be reduced since chickens produce a significant higher antibody quantity than rabbits. Despite its several advantages this technology (IgY-technology) is rather scarcely used. Traditional behavior as well as limited or no information at all may hamper a broader acceptance at present. However, significant arguments exist in chicken housing, the choice of appropriate IgY-extraction methods and a lack of information regarding the use of IgY-antibodies. This paper intends to give a short introduction in the IgY-technology, to briefly discuss the state of the art and to inform on recent developments and discussions in this field. The suitability of IgY for special fields of application (as a result of the structural differences between IgY and IgG) is emphasized (e.g. assays combining IgG and IgY, immunization of chickens against highly conserved anti-genes). In addition, it is stressed that the IgY-technology as an alternative method can particularly integrate requirements of animal protection (reduce, replace, refine), science (characteristics of avian immune system and resulting properties of IgY) and economy (amount of IgY produced from one chicken).

  9. Technological developments in real-time operational hydrologic forecasting in the United States

    Science.gov (United States)

    Hudlow, Michael D.

    1988-09-01

    The hydrologic forecasting service of the United States spans applications and scales ranging from those associated with the issuance of flood and flash warnings to those pertaining to seasonal water supply forecasts. New technological developments (underway in or planned by the National Weather Service (NWS) in support of the Hydrologic Program) are carried out as combined efforts by NWS headquarters and field personnel in cooperation with other organizations. These developments fall into two categories: hardware and software systems technology, and hydrometeorological analysis and prediction technology. Research, development, and operational implementation in progress in both of these areas are discussed. Cornerstones of an overall NWS modernization effort include implementation of state-of-the-art data acquisition systems (including the Next Generation Weather Radar) and communications and computer processing systems. The NWS Hydrologic Service will capitalize on these systems and will incorporate results from specific hydrologic projects including collection and processing of multivariate data sets, conceptual hydrologic modeling systems, integrated hydrologic modeling systems with meteorological interfaces and automatic updating of model states, and extended streamflow prediction techniques. The salient aspects of ongoing work in these areas are highlighted in this paper, providing some perspective on the future U.S. hydrologic forecasting service and its transitional period into the 1990s.

  10. State-of-the-Art Report on Multi-scale Modelling of Nuclear Fuels

    International Nuclear Information System (INIS)

    Bartel, T.J.; Dingreville, R.; Littlewood, D.; Tikare, V.; Bertolus, M.; Blanc, V.; Bouineau, V.; Carlot, G.; Desgranges, C.; Dorado, B.; Dumas, J.C.; Freyss, M.; Garcia, P.; Gatt, J.M.; Gueneau, C.; Julien, J.; Maillard, S.; Martin, G.; Masson, R.; Michel, B.; Piron, J.P.; Sabathier, C.; Skorek, R.; Toffolon, C.; Valot, C.; Van Brutzel, L.; Besmann, Theodore M.; Chernatynskiy, A.; Clarno, K.; Gorti, S.B.; Radhakrishnan, B.; Devanathan, R.; Dumont, M.; Maugis, P.; El-Azab, A.; Iglesias, F.C.; Lewis, B.J.; Krack, M.; Yun, Y.; Kurata, M.; Kurosaki, K.; Largenton, R.; Lebensohn, R.A.; Malerba, L.; Oh, J.Y.; Phillpot, S.R.; Tulenko, J. S.; Rachid, J.; Stan, M.; Sundman, B.; Tonks, M.R.; Williamson, R.; Van Uffelen, P.; Welland, M.J.; Valot, Carole; Stan, Marius; Massara, Simone; Tarsi, Reka

    2015-10-01

    The Nuclear Science Committee (NSC) of the Nuclear Energy Agency (NEA) has undertaken an ambitious programme to document state-of-the-art of modelling for nuclear fuels and structural materials. The project is being performed under the Working Party on Multi-Scale Modelling of Fuels and Structural Material for Nuclear Systems (WPMM), which has been established to assess the scientific and engineering aspects of fuels and structural materials, describing multi-scale models and simulations as validated predictive tools for the design of nuclear systems, fuel fabrication and performance. The WPMM's objective is to promote the exchange of information on models and simulations of nuclear materials, theoretical and computational methods, experimental validation and related topics. It also provides member countries with up-to-date information, shared data, models, and expertise. The goal is also to assess needs for improvement and address them by initiating joint efforts. The WPMM reviews and evaluates multi-scale modelling and simulation techniques currently employed in the selection of materials used in nuclear systems. It serves to provide advice to the nuclear community on the developments needed to meet the requirements of modelling for the design of different nuclear systems. The original WPMM mandate had three components (Figure 1), with the first component currently completed, delivering a report on the state-of-the-art of modelling of structural materials. The work on modelling was performed by three expert groups, one each on Multi-Scale Modelling Methods (M3), Multi-Scale Modelling of Fuels (M2F) and Structural Materials Modelling (SMM). WPMM is now composed of three expert groups and two task forces providing contributions on multi-scale methods, modelling of fuels and modelling of structural materials. This structure will be retained, with the addition of task forces as new topics are developed. The mandate of the Expert Group on Multi-Scale Modelling of

  11. ARIA: Delivering state-of-the-art InSAR products to end users

    Science.gov (United States)

    Agram, P. S.; Owen, S. E.; Hua, H.; Manipon, G.; Sacco, G. F.; Bue, B. D.; Fielding, E. J.; Yun, S. H.; Simons, M.; Webb, F.; Rosen, P. A.; Lundgren, P.; Liu, Z.

    2016-12-01

    Advanced Rapid Imaging and Analysis (ARIA) Center for Natural Hazards aims to bring state-of-the-art geodetic imaging capabilities to an operational level in support of local, national, and international hazard response communities. ARIA project's first foray into operational generation of InSAR products was with Calimap Project, in collaboration with ASI-CIDOT, using X-band data from the Cosmo-SkyMed constellation. Over the last year, ARIA's processing infrastructure has been significantly upgraded to exploit the free stream of high quality C-band SAR data from ESA's Sentinel-1 mission and related algorithmic improvements to the ISCE software. ARIA's data system can now operationally generate geocoded unwrapped phase and coherence products in GIS-friendly formats from Sentinel-1 TOPS mode data in an automated fashion, and this capability is currently being exercised various study sites across the United States including Hawaii, Central California, Iceland and South America. The ARIA team, building on the experience gained from handling X-band data and C-band data, has also built an automated machine learning-based classifier to label the auto-generated interferograms based on phase unwrapping quality. These high quality "time-series ready" InSAR products generated using state-of-the-art processing algorithms can be accessed by end users using two different mechanisms - 1) a Faceted-search interface that includes browse imagery for quick visualization and 2) an ElasticSearch-based API to enable bulk automated download, post-processing and time-series analysis. In this talk, we will present InSAR results from various global events that ARIA system has responded to. We will also discuss the set of geospatial big data tools including GIS libraries and API tools, that end users will need to familiarize themselves with in order to maximize the utilization of continuous stream of InSAR products from the Sentinel-1 and NISAR missions that the ARIA project will generate.

  12. A Review of Wireless Sensor Technologies and Applications in Agriculture and Food Industry: State of the Art and Current Trends

    Science.gov (United States)

    Ruiz-Garcia, Luis; Lunadei, Loredana; Barreiro, Pilar; Robla, Jose Ignacio

    2009-01-01

    The aim of the present paper is to review the technical and scientific state of the art of wireless sensor technologies and standards for wireless communications in the Agri-Food sector. These technologies are very promising in several fields such as environmental monitoring, precision agriculture, cold chain control or traceability. The paper focuses on WSN (Wireless Sensor Networks) and RFID (Radio Frequency Identification), presenting the different systems available, recent developments and examples of applications, including ZigBee based WSN and passive, semi-passive and active RFID. Future trends of wireless communications in agriculture and food industry are also discussed. PMID:22408551

  13. A Review of Wireless Sensor Technologies and Applications in Agriculture and Food Industry: State of the Art and Current Trends

    Directory of Open Access Journals (Sweden)

    Ignacio Robla

    2009-06-01

    Full Text Available The aim of the present paper is to review the technical and scientific state of the art of wireless sensor technologies and standards for wireless communications in the Agri-Food sector. These technologies are very promising in several fields such as environmental monitoring, precision agriculture, cold chain control or traceability. The paper focuses on WSN (Wireless Sensor Networks and RFID (Radio Frequency Identification, presenting the different systems available, recent developments and examples of applications, including ZigBee based WSN and passive, semi-passive and active RFID. Future trends of wireless communications in agriculture and food industry are also discussed.

  14. Flow-induced vibration in LMFBR steam generators: a state-of-the-art review

    International Nuclear Information System (INIS)

    Shin, Y.S.; Wambsganss, M.W.

    1975-05-01

    This state-of-the-art review identifies and discusses existing methods of flow-induced vibration analysis applicable to steam generators, their limitations, and base-technology needs. Also included are discussions of five different LMFBR steam-generator configurations and important design considerations, failure experiences, possible flow-induced excitation mechanisms, vibration testing, and available methods of vibration analysis. The objectives are to aid LMFBR steam-generator designers in making the best possible evaluation of potential vibration in steam-generator internals, and to provide the basis for development of design guidelines to avoid detrimental flow-induced vibration

  15. Clinical Trials of Blood Pressure Lowering and Antihypertensive Medication: is Cognitive Measurement State-Of-The-Art?

    Science.gov (United States)

    Elias, Merrill F; Torres, Rachael V; Davey, Adam

    2018-02-22

    Randomized controlled trials of blood pressure (BP) lowering and antihypertensive medication use on cognitive outcomes have often been disappointing, reporting mixed findings and small effect sizes. We evaluate the extent to which cognitive assessment protocols used in these trials approach state-of-the-art. Overall, we find that a primary focus on cognition and the systematic selection of cognitive outcomes across trials take a backseat to other trial goals. Twelve trials investigating change in cognitive functioning were examined and none met criteria for state-of-the-art assessment, including use of at least 4 tests indexing 2 cognitive domains. Four trials investigating incident dementia were also examined. Each trial used state-of-the-art diagnostic criteria to assess dementia, although follow-up periods were relatively short, with only 2 trials lasting for at least 3 years. Weaknesses in each trial may act to obscure or weaken the positive effects of BP lowering on cognitive functioning. Improving trial designs in terms of cognitive outcomes selected and length of follow-up periods employed could lead to more promising findings. We offer logical steps to achieve state-of-the-art assessment protocols, with examples, in hopes of improving future trials.

  16. Current State-of-the-Art MRI for Comprehensive Evaluation of Potential Living Liver Donors.

    Science.gov (United States)

    Jhaveri, Kartik S; Guo, Lijun; Guimarães, Luís

    2017-07-01

    This review focuses on the role of state-of-the-art MRI-based techniques for comprehensive evaluation of living donors providing single-visit assessment of the liver vasculature via MR angiography, of the biliary tract via conventional T2-weighted MR cholangiography and T1-weighted gadoxetate disodium-enhanced MR cholangiography, and of hepatic steatosis via T2*-corrected multiecho chemical shift-based water-fat separation MRI and high-speed T2-corrected multiecho MR spectroscopy. By using current state-of-the-art techniques, MRI can provide a one-stop-shop method for evaluation of the potential living liver donors.

  17. Human resource development and antiretroviral treatment in Free State province, South Africa

    Directory of Open Access Journals (Sweden)

    Schneider Helen

    2008-07-01

    Full Text Available Abstract Background In common with other developing countries, South Africa's public health system is characterised by human resource shortfalls. These are likely to be exacerbated by the escalating demand for HIV care and a large-scale antiretroviral therapy (ART programme. Focusing on professional nurses, the main front-line providers of primary health care in South Africa, we studied patterns of planning, recruitment, training and task allocation associated with an expanding ART programme in the districts of one province, the Free State. Methods Data collection included an audit of professional nurse posts created and filled following the introduction of the ART programme, repeated surveys of facilities providing ART over two years to assess the deployment of staff, and secondary data analysis of government personnel databases to track broader patterns of recruitment and training. Results Although a substantial number of new professional nurse posts were established for the ART programme in the Free State, nearly 80% of these posts were filled by nurses transferring from other programmes within the same facility or from facilities within the same district, rather than by new recruits. From the beginning, ART nurse posts tended to be graded at a senior level, and later, in an effort to recruit professional nurses for the ART programme, the majority (54.6% of nurses entering the programme were promoted to a senior level. The vacancy rate of nurse ART posts was significantly lower than that of other posts in the primary health care (PHC system (15.7% vs 37.1%. Nursing posts in urban ART facilities were more easily filled than those in rural areas, exacerbating existing imbalances. The shift of nurses into the ART programme was partially compensated for by the appointment of additional support staff, task shifting to community health workers, and a large investment in training of PHC workers. However, the use of less-trained, mid-level enrolled

  18. A Learning Patterns Perspective on Student Learning in Higher Education: State of the Art and Moving Forward

    Science.gov (United States)

    Vermunt, Jan D.; Donche, Vincent

    2017-01-01

    The aim of this article is to review the state of the art of research and theory development on student learning patterns in higher education and beyond. First, the learning patterns perspective and the theoretical framework are introduced. Second, research published since 2004 on student learning patterns is systematically identified and…

  19. The state-of-the-art in research on Science teaching for deaf students

    Directory of Open Access Journals (Sweden)

    Ronaldo Santos Santana

    2018-05-01

    Full Text Available This study aimed to highlight the state-of-the-art in research on Science teaching for deaf students from 2012 to 2017, in order to outline an overview of the latest studies in the area, as well as their trends and main considerations. For that, a state-of-the-art research was carried out and, for the construction of the data corpus, abstracts of papers published in scientific journals, course conclusion papers, Masters thesis and Doctoral dissertations were used. From the data analysis, categories were elaborated and trends and challenges in the field were made explicit. The results demonstrate that research in this field is in imminent growth and they are being articulated to the theoretical frameworks that underpin the teaching of Science for hearing students.

  20. Geographical education in Russia: state-of-the-art and new perspectives

    Science.gov (United States)

    Chalov, Sergey R.

    2010-05-01

    Up-today education systems of different countries face new perspectives in globalizing World. The Russian higher education framework was basically incompatible with the process of making academic degree standards and quality assurance standards more comparable throughout the World (so called Bologna process for Europe). So did Earth Sciences education framework. Today the key question in the further development of Earth sciences in Russia is the interaction with European education system. At the crossroads it is challenging to analyze the history and state-of-the-art. We considered the question on the example of one of the largest centers of the Earth Sciences education in Russia - Faculty of Geography of Lomonosov Moscow State University, which is moreover regarded to be one of the largest scientific and educational centers of geography in the World. There are 1200 students and 180 PhD students studying on the Faculty. The Faculty consists of 15 departments, 8 research laboratories and 4 field stations, where 850 employees work. Tuition of geography was established at Lomonosov Moscow State University since the day of its foundation. The significance of geographical studies at the University, which originally comprised the Faculty of Philosophy, the Faculty of Law and the Faculty of Medicine, was already mentioned in the draft plan of its establishment (1755), which said that «anyone wishing to attend professors' lectures at the University has to learn foreign languages and first scientific basis beforehand". For this purpose two «gymnasiums» consisting of four schools were es-tablished at the University. Geography was included into the curriculum of the «first scientific basis school» and the «school of the distinguished European languages» - German and French. Today Geography in Russia is regarded to be one of the base sciences that are devoted to the problem of society and environment and their interactions. Geography was gone far from the descriptive

  1. A framework for measuring the social impact of food allergy across Europe: a EuroPrevall state of the art paper

    NARCIS (Netherlands)

    de Blok, B. M. J.; Vlieg-Boerstra, B. J.; Oude Elberink, J. N. G.; Duiverman, E. J.; DunnGalvin, A.; Hourihane, J. O.'B.; Cornelisse-Vermaat, J. R.; Frewer, L.; Mills, C.; Dubois, A. E. J.

    2007-01-01

    This state of the art paper has been developed through EuroPrevall, a European multicentre research project funded by the European Union which aims to improve quality of life for food allergic individuals. Food allergy (whether clinically diagnosed or self-perceived) represents a major health issue

  2. State-of-the-Art Methods for Brain Tissue Segmentation: A Review.

    Science.gov (United States)

    Dora, Lingraj; Agrawal, Sanjay; Panda, Rutuparna; Abraham, Ajith

    2017-01-01

    Brain tissue segmentation is one of the most sought after research areas in medical image processing. It provides detailed quantitative brain analysis for accurate disease diagnosis, detection, and classification of abnormalities. It plays an essential role in discriminating healthy tissues from lesion tissues. Therefore, accurate disease diagnosis and treatment planning depend merely on the performance of the segmentation method used. In this review, we have studied the recent advances in brain tissue segmentation methods and their state-of-the-art in neuroscience research. The review also highlights the major challenges faced during tissue segmentation of the brain. An effective comparison is made among state-of-the-art brain tissue segmentation methods. Moreover, a study of some of the validation measures to evaluate different segmentation methods is also discussed. The brain tissue segmentation, content in terms of methodologies, and experiments presented in this review are encouraging enough to attract researchers working in this field.

  3. Identification and implementation of end-user needs during development of a state-of-the-art modeling tool-set - 59069

    International Nuclear Information System (INIS)

    Seitz, Roger; Williamson, Mark; Gerdes, Kurt; Freshley, Mark; Dixon, Paul; Collazo, Yvette T.; Hubbard, Susan

    2012-01-01

    The U.S. Department of Energy (US DOE) Office of Environmental Management, Technology Innovation and Development is supporting a multi-National Laboratory effort to develop the Advanced Simulation Capability for Environmental Management (ASCEM). ASCEM is an emerging state-of-the-art scientific approach and software infrastructure for understanding and predicting contaminant fate and transport in natural and engineered systems. These modular and open-source high performance computing tools and user interfaces will facilitate integrated approaches that enable standardized assessments of performance and risk for EM cleanup and closure decisions. The ASCEM team recognized that engaging end-users in the ASCEM development process would lead to enhanced development and implementation of the ASCEM tool-sets in the user community. End-user involvement in ASCEM covers a broad spectrum of perspectives, including: performance assessment (PA) and risk assessment practitioners, research scientists, decision-makers, oversight personnel, and regulators engaged in the US DOE cleanup mission. End-users are primarily engaged in ASCEM via the ASCEM User Steering Committee (USC) and the 'user needs interface' task. Future plans also include user involvement in demonstrations of the ASCEM tools. This paper will describe the details of how end users have been engaged in the ASCEM program and will demonstrate how this involvement has strengthened both the tool development and community confidence. ASCEM tools requested by end-users specifically target modeling challenges associated with US DOE cleanup activities. The demonstration activities involve application of ASCEM tools and capabilities to representative problems at DOE sites. Selected results from the ASCEM Phase 1 demonstrations are discussed to illustrate how capabilities requested by end-users were implemented in prototype versions of the ASCEM tool. The ASCEM team engaged a variety of interested parties early in the development

  4. Link Prediction in Social Networks: the State-of-the-Art

    OpenAIRE

    Wang, Peng; Xu, Baowen; Wu, Yurong; Zhou, Xiaoyu

    2014-01-01

    In social networks, link prediction predicts missing links in current networks and new or dissolution links in future networks, is important for mining and analyzing the evolution of social networks. In the past decade, many works have been done about the link prediction in social networks. The goal of this paper is to comprehensively review, analyze and discuss the state-of-the-art of the link prediction in social networks. A systematical category for link prediction techniques and problems ...

  5. Concept of development of integrated computer - based control system for 'Ukryttia' object

    International Nuclear Information System (INIS)

    Buyal'skij, V.M.; Maslov, V.P.

    2003-01-01

    The structural concept of Chernobyl NPP 'Ukryttia' Object's integrated computer - based control system development is presented on the basis of general concept of integrated Computer - based Control System (CCS) design process for organizing and technical management subjects.The concept is aimed at state-of-the-art architectural design technique application and allows using modern computer-aided facilities for functional model,information (logical and physical) models development,as well as for system object model under design

  6. Development of thyroid monitoring system for the measurement of 125I

    International Nuclear Information System (INIS)

    Sankhla, Rajesh; Singh, I.S.; Rao, D.D.; Pradeepkumar, K.S.

    2015-01-01

    Iodine-125 has gained wide acceptance in medical science for diagnosis and therapeutic applications. A considerable number of radiation workers of BARC and BRIT are involved in the production of 125 I and preparation of radio immunoassay (RIA) kits to meet medical requirement of the country. A state of the art Thyroid Monitoring System incorporated with 51 mm diameter x 3 mm thick NaI(Tl) detector is developed for in-vivo monitoring of 125 I in radiation workers handling this radioisotope. The developed system also has provision to accommodate variable body sizes (child to adult). This paper presents the different aspects of the system and its calibration using IAEA neck phantom for estimation of thyroidal content of 125 I. (author)

  7. Art Medium and Art Infrastructure Development in Contemporary Indonesian Art

    Directory of Open Access Journals (Sweden)

    A. Rikrik Kusmara

    2013-11-01

    Full Text Available This research review Indonesian contemporary artists that used the various media in the presentation in his works over the years since 2000 until now. Survey at Pameran Besar Indonesia "Manifesto" in May 2008, were around 670 Indonesian living artists, 350 are consistently professional artists, 41 artists who utilize a variety of media in each works and 6 of them are artists who used a various of media on their solo exhibition including combining conventional media with new media and installation approaches. 6 artists are analyzed on the structure of the media presentation configuration their used, and generally they used more than 3 types of media in their solo exhibition, first, painting/drawing, second, sculpture/object/installation, and third video/photography. In the study of each exhibition process, generally utilizing the curatorial and sponsored by promotor (gallery. This research shows a rapid development of economic infrastructure in Indonesian the art in 2000-an era with the emergence of many auction hall, a new generation of collectors and galleries, and the Asian art market and global orientation, it became one of the holding in contemporary art of Indonesia, has been shifting art situation from cultural appreciation in the era of 90-to an era to cultural production.

  8. The development of robotic systems for hazardous environments

    International Nuclear Information System (INIS)

    Collis-Smith, J.A.; Schilling, R.

    1996-01-01

    The need for teleoperated and robotic systems is growing. This growth is driven by several factors such as - statutory requirements; risk reduction and economic pressures. Robotic Systems are needed to provide reliable, economic means to perform surveillance, quantitative inspection, repairs, upgrading and eventual dismantling for decommissioning tasks. The range of potential applications has widened and there is now significant technical cross-fertilisation between developments in diverse environments. The typical robotic system consists of the emplacement equipment, the dextrous arm, the tool and the controls. The control system provides the operator with an integrated interface between the principal components, so that the operator can concentrate fully at the high level on the specific task in hand, while the control system and its software performs all the detail functions within the subparts of the integrated system. This paper develops this underlying logic, and is illustrated by experience drawn from a variety of examples in different environments to show the present state of the art in GEC Alsthom and suggest the way ahead in the near-term future. (Author)

  9. Wind turbines and seismic hazard: a state-of-the-art review

    DEFF Research Database (Denmark)

    Katsanos, Evangelos; Thöns, Sebastian; Georgakis, Christos T.

    2016-01-01

    , India, Southern Europe and East Asia) highlight the necessity for thorough consideration of the seismic implications on these energy harnessing systems. Along these lines, this state-of-the-art paper presents a comparative survey of the published research relevant to the seismic analysis, design......Wind energy is a rapidly growing field of renewable energy, and as such, intensive scientific and societal interest has been already attracted. Research on wind turbine structures has been mostly focused on the structural analysis, design and/or assessment of wind turbines mainly against normal...... and assessment of wind turbines. Based on numerical simulation, either deterministic or probabilistic approaches are reviewed, because they have been adopted to investigate the sensitivity of wind turbines’ structural capacity and reliability in earthquake-induced loading. The relevance of seismic hazard...

  10. State of art in FE-based fuel performance codes

    International Nuclear Information System (INIS)

    Kim, Hyo Chan; Yang, Yong Sik; Kim, Dae Ho; Bang, Je Geon; Kim, Sun Ki; Koo, Yang Hyun

    2013-01-01

    Finite element (FE) method that is reliable and proven solution in mechanical field has been introduced into fuel performance codes for multidimensional analysis. The present state of the art in numerical simulation of FE-based fuel performance predominantly involves 2-D axisymmetric model and 3-D volumetric model. The FRAPCON and FRAPTRAN own 1.5-D and 2-D FE model to simulate PCMI and cladding ballooning. In 2-D simulation, the FALCON code, developed by EPRI, is a 2-D (R-Z and R-θ) fully thermal-mechanically coupled steady-state and transient FE-based fuel behavior code. The French codes TOUTATIS and ALCYONE which are 3-D, and typically used to investigate localized behavior. In 2008, the Idaho National Laboratory (INL) has been developing multidimensional (2-D and 3-D) nuclear fuel performance code called BISON. In this paper, the current state of FE-based fuel performance code and their models are presented. Based on investigation into the codes, requirements and direction of development for new FE-based fuel performance code can be discussed. Based on comparison of models in FE-based fuel performance code, status of art in the codes can be discussed. A new FE-based fuel performance code should include typical pellet and cladding models which all codes own. In particular, specified pellet and cladding model such as gaseous swelling and high burnup structure (HBS) model should be developed to improve accuracy of code as well as consider AC condition. To reduce computation cost, the approximated gap and the optimized contact model should be also developed. Nuclear fuel operates in an extreme environment that induces complex multiphysics phenomena, occurring over distances ranging from inter-atomic spacing to meters, and times scales ranging from microseconds to years. This multiphysics behavior is often tightly coupled, a well known example being the thermomechanical behavior. Adding to this complexity, important aspects of fuel behavior are inherently

  11. State-of-the-art of biodegradable composite materials

    International Nuclear Information System (INIS)

    Baley, Ch.; Grohens, Y.; Pillin, I.

    2004-01-01

    Nowadays, the market demand for environment friendly materials is in strong growth. The biodegradable composites (biodegradable fibres and polymers) mainly extracted from renewable resources will be a major contributor to the production of new industrial high performance products partially solving the problem of waste management. At the end of the lifetime, a structural bio-composite could be be crushed and recycled through a controlled industrial composting process. This the state-of-the-art report focuses on the biopolymers the vegetable fibres properties, the mechanisms of biodegradation and the examples of biodegradable composites. Eco-design of new products requires these new materials for which a life cycle analysis is nevertheless necessary to validate their environmental benefits. (authors)

  12. Multistandard Radio Systems: State of the Art and Research Issues

    DEFF Research Database (Denmark)

    Zakrzewska, Anna; Berger, Michael Stübert; Ruepp, Sarah Renée

    2010-01-01

    Integration of various wireless standards and building one consistent and compatible broadband system is a trend in wireless communication nowadays. This work focuses on multistandard networks enabling the cooperation between LTE and WiMAX systems. It presents the general vision on multistandard ...... systems and current possibilities of such integration. Furthermore, key features and challenges of developing this kind of network are discussed along with the proposed solutions and their performance benefits....

  13. MRI Sequences in Head & Neck Radiology - State of the Art.

    Science.gov (United States)

    Widmann, Gerlig; Henninger, Benjamin; Kremser, Christian; Jaschke, Werner

    2017-05-01

    Background  Magnetic resonance imaging (MRI) has become an essential imaging modality for the evaluation of head & neck pathologies. However, the diagnostic power of MRI is strongly related to the appropriate selection and interpretation of imaging protocols and sequences. The aim of this article is to review state-of-the-art sequences for the clinical routine in head & neck MRI and to describe the evidence for which medical question these sequences and techniques are useful. Method  Literature review of state-of-the-art sequences in head & neck MRI. Results and Conclusion  Basic sequences (T1w, T2w, T1wC+) and fat suppression techniques (TIRM/STIR, Dixon, Spectral Fat sat) are important tools in the diagnostic workup of inflammation, congenital lesions and tumors including staging. Additional sequences (SSFP (CISS, FIESTA), SPACE, VISTA, 3D-FLAIR) are used for pathologies of the cranial nerves, labyrinth and evaluation of endolymphatic hydrops in Menière's disease. Vessel and perfusion sequences (3D-TOF, TWIST/TRICKS angiography, DCE) are used in vascular contact syndromes, vascular malformations and analysis of microvascular parameters of tissue perfusion. Diffusion-weighted imaging (EPI-DWI, non-EPI-DWI, RESOLVE) is helpful in cholesteatoma imaging, estimation of malignancy, and evaluation of treatment response and posttreatment recurrence in head & neck cancer. Understanding of MRI sequences and close collaboration with referring physicians improves the diagnostic confidence of MRI in the daily routine and drives further research in this fascinating image modality. Key Points:   · Understanding of MRI sequences is essential for the correct and reliable interpretation of MRI findings.. · MRI protocols have to be carefully selected based on relevant clinical information.. · Close collaboration with referring physicians improves the output obtained from the diagnostic possibilities of MRI.. Citation Format · Widmann G, Henninger B, Kremser C et

  14. State-of-the-art assessment of requirements for attachments of WiFi equipments to electric utility facilities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    Electric utilities are receiving a growing number of requests to attach WiFi equipment to their systems. However, many utilities are not prepared to meet these requests because they have not had enough time to formally review and comment on the particular issues associated with Wi-Fi attachments. Although electric utilities are required to allow the attachments, there is no uniform standard to govern those attachments. This paper discussed the state-of-the-art philosophies and requirements of electric utilities who have allowed WiFi equipment on their systems. The advantages and limitations of each philosophy or practice were also discussed. The requirements for codes and standards in the United States and Canada for high voltage construction were also evaluated.

  15. art and culture administration in Edo State

    African Journals Online (AJOL)

    imitch

    its environment the social, political, economic, aesthetic and religious norms and .... December, 2009, the Ministry of Arts, Culture and Tourism did organize a well ... and Social Welfare Departments and the mass media in the state so that the ...

  16. Laser Beam Machining (LBM), State of the Art and New Opportunities

    NARCIS (Netherlands)

    Meijer, J.

    2004-01-01

    An overview is given of the state of the art of laser beam machining in general with special emphasis on applications of short and ultrashort lasers. In laser welding the trend is to apply optical sensors for process control. Laser surface treatment is mostly used to apply corrosion and wear

  17. Deep Learning for Brain MRI Segmentation: State of the Art and Future Directions.

    Science.gov (United States)

    Akkus, Zeynettin; Galimzianova, Alfiia; Hoogi, Assaf; Rubin, Daniel L; Erickson, Bradley J

    2017-08-01

    Quantitative analysis of brain MRI is routine for many neurological diseases and conditions and relies on accurate segmentation of structures of interest. Deep learning-based segmentation approaches for brain MRI are gaining interest due to their self-learning and generalization ability over large amounts of data. As the deep learning architectures are becoming more mature, they gradually outperform previous state-of-the-art classical machine learning algorithms. This review aims to provide an overview of current deep learning-based segmentation approaches for quantitative brain MRI. First we review the current deep learning architectures used for segmentation of anatomical brain structures and brain lesions. Next, the performance, speed, and properties of deep learning approaches are summarized and discussed. Finally, we provide a critical assessment of the current state and identify likely future developments and trends.

  18. Near-infrared sub-bandgap all-silicon photodetectors: state of the art and perspectives.

    Science.gov (United States)

    Casalino, Maurizio; Coppola, Giuseppe; Iodice, Mario; Rendina, Ivo; Sirleto, Luigi

    2010-01-01

    Due to recent breakthroughs, silicon photonics is now the most active discipline within the field of integrated optics and, at the same time, a present reality with commercial products available on the market. Silicon photodiodes are excellent detectors at visible wavelengths, but the development of high-performance photodetectors on silicon CMOS platforms at wavelengths of interest for telecommunications has remained an imperative but unaccomplished task so far. In recent years, however, a number of near-infrared all-silicon photodetectors have been proposed and demonstrated for optical interconnect and power-monitoring applications. In this paper, a review of the state of the art is presented. Devices based on mid-bandgap absorption, surface-state absorption, internal photoemission absorption and two-photon absorption are reported, their working principles elucidated and their performance discussed and compared.

  19. Near-Infrared Sub-Bandgap All-Silicon Photodetectors: State of the Art and Perspectives

    Directory of Open Access Journals (Sweden)

    Luigi Sirleto

    2010-11-01

    Full Text Available Due to recent breakthroughs, silicon photonics is now the most active discipline within the field of integrated optics and, at the same time, a present reality with commercial products available on the market. Silicon photodiodes are excellent detectors at visible wavelengths, but the development of high-performance photodetectors on silicon CMOS platforms at wavelengths of interest for telecommunications has remained an imperative but unaccomplished task so far. In recent years, however, a number of near-infrared all-silicon photodetectors have been proposed and demonstrated for optical interconnect and power-monitoring applications. In this paper, a review of the state of the art is presented. Devices based on mid-bandgap absorption, surface-state absorption, internal photoemission absorption and two-photon absorption are reported, their working principles elucidated and their performance discussed and compared.

  20. A state-of-the-art report on international nuclear information system

    International Nuclear Information System (INIS)

    Lee, Sung Ho; Keum, Jong Yong

    1997-02-01

    INIS (International Nuclear Information System) established in 1969 by IAEA, is the world's leading information system for the peaceful uses of nuclear energy in collaboration with its 98 member states and 17 international organizations. As a member state, Korea has participated in the INIS activities from the beginning of INIS establishment. The technical information department of KAERI plays the role of the National Center of the Republic of Korea. The purpose of this study is to prepare the method for the activation of domestic INIS operation. To accomplish the purpose, we investigated and analyzed the status of INIS, domestic INIS activities, and the recent INIS projects. Especially some projects are expected to influence domestic INIS activities deeply in the near future. The analyzed results show that for better INIS activities in Korea, we need to review politically and technically on the methods to amplify the rate of the INIS input, to construct and manage the INIS local host, and to use the source documents on CD-ROMs. (author). 24 refs., 6 tabs., 6 figs

  1. State of the Art: Embedding Security in Vehicles

    Directory of Open Access Journals (Sweden)

    Weimerskirch André

    2007-01-01

    Full Text Available For new automotive applications and services, information technology (IT has gained central importance. IT-related costs in car manufacturing are already high and they will increase dramatically in the future. Yet whereas safety and reliability have become a relatively well-established field, the protection of vehicular IT systems against systematic manipulation or intrusion has only recently started to emerge. Nevertheless, IT security is already the base of some vehicular applications such as immobilizers or digital tachographs. To securely enable future automotive applications and business models, IT security will be one of the central technologies for the next generation of vehicles. After a state-of-the-art overview of IT security in vehicles, we give a short introduction into cryptographic terminology and functionality. This contribution will then identify the need for automotive IT security while presenting typical attacks, resulting security objectives, and characteristic constraints within the automotive area. We will introduce core security technologies and relevant security mechanisms followed by a detailed description of critical vehicular applications, business models, and components relying on IT security. We conclude our contribution with a detailed statement about challenges and opportunities for the automotive IT community for embedding IT security in vehicles.

  2. State of the Art: Embedding Security in Vehicles

    Directory of Open Access Journals (Sweden)

    André Weimerskirch

    2007-06-01

    Full Text Available For new automotive applications and services, information technology (IT has gained central importance. IT-related costs in car manufacturing are already high and they will increase dramatically in the future. Yet whereas safety and reliability have become a relatively well-established field, the protection of vehicular IT systems against systematic manipulation or intrusion has only recently started to emerge. Nevertheless, IT security is already the base of some vehicular applications such as immobilizers or digital tachographs. To securely enable future automotive applications and business models, IT security will be one of the central technologies for the next generation of vehicles. After a state-of-the-art overview of IT security in vehicles, we give a short introduction into cryptographic terminology and functionality. This contribution will then identify the need for automotive IT security while presenting typical attacks, resulting security objectives, and characteristic constraints within the automotive area. We will introduce core security technologies and relevant security mechanisms followed by a detailed description of critical vehicular applications, business models, and components relying on IT security. We conclude our contribution with a detailed statement about challenges and opportunities for the automotive IT community for embedding IT security in vehicles.

  3. Pediatric martial arts injuries presenting to Emergency Departments, United States 1990-2003.

    Science.gov (United States)

    Yard, Ellen E; Knox, Christy L; Smith, Gary A; Comstock, R Dawn

    2007-08-01

    Although an estimated 6.5 million United States (US) children aged 6-17 practiced a martial art in 2004, there have been no nationally representative studies comparing pediatric injuries among the three most popular disciplines, karate, taekwondo, and judo. Describe pediatric martial arts injuries presenting to a representative sample of US Emergency Departments (EDs) from 1990 to 2003. We reviewed all martial arts injuries captured by the US Consumer Product Safety Commission's (CPSC), National Electronic Injury Surveillance System (NEISS). An estimated 128,400 children injuries from 1990 to 2003. Injured tended to be male (73.0%) and had a mean age of 12.1 years. Most injuries were attributed to karate (79.5%). The most common mechanism of injury was being kicked (25.6%), followed by falling (20.6%) and kicking (18.0%). The majority of injuries occurred to the lower leg/foot/ankle (30.1%) and hand/wrist (24.5%). The most common injury diagnoses were sprains/strains (29.3%), contusions/abrasions (27.8%), and fractures (24.6%). Participants in judo sustained significantly higher proportions of shoulder/upper arm injuries than karate (IPR=4.31, 95% CI: 2.84-6.55) or taekwondo (IPR=9.75, 95% CI: 3.53-26.91) participants. There were also higher proportions of neck injuries sustained by judo participants compared to karate (IPR=4.73, 95% CI: 1.91-11.70) or taekwondo (IPR=4.17, 95% CI: 1.02-17.06) participants. Pediatric martial arts injuries differ by discipline. Understanding these injury patterns can assist with the development of discipline-specific preventive interventions.

  4. Art=life? Deleuze, badiou and ontology of the human

    Directory of Open Access Journals (Sweden)

    Filipović Andrija

    2015-01-01

    Full Text Available The idea of the relation between art and life as becoming-life of art is a consequence of specific modern developments ranging from the Enlightenment to capitalism. This assemblage of thought and practice is present in one of the most dominant art forms today, and the task of this paper is to reassess the current state of affairs in art considering that the current state of affairs in art is a symptom of the global society of control. In order to be emancipatory art, on the one hand, Art presupposes de-substantialization and deessentialization of the biopolitically formed life and the category of Man, while on the other hand it also presupposes a new „generic in-humanum“ (in Badiou, that is, a people to come (in Deleuze as the basis of politicity. Hence, emancipatory art needs to break away with the human in order to reach that which is beyond the current democratic materialism.

  5. Interactive Ways of Becoming a Specialist Fine Art of the Ukrainian Danube Region

    Directory of Open Access Journals (Sweden)

    Ivan Pastyr

    2016-08-01

    Full Text Available In modern conditions the method of education is especially effective if it is built on the intensification of mental activity and is aimed at developing a creative personality. The study presents a system of interactive ways of becoming a specialist in Izmail State Liberal Arts University.

  6. State-of-the-art methodology of forest inventory: a symposium proceedings.

    Science.gov (United States)

    Vernon J. LaBau; Tiberius Cunia

    1990-01-01

    The state-of-the-art of forest inventory methodology, being closely integrated with the fast-moving, high technology computer world, has been changing at a rapid pace over the past decade. Several successful conferences were held during the 1980s with the goal and purpose of staying abreast of such change. This symposium was conceived, not just with the idea of helping...

  7. FIPRED state of art

    International Nuclear Information System (INIS)

    Ohai, D.; Meleg, T.; Dumitrescu, I.; Benga, D.

    2009-01-01

    Full text: The paper presents the FIPRED (Fission Product Release from Debris Bed) Project state of art (UO 2 sintered pellets oxidation). The FIPRED Project is dedicated to the study of the fission products released from irradiated pellets present in debris bed. The fission product release is produced by oxidative self disintegration of sintered pellets at air ingress and it depends on temperature. The experimental program covered experiments of 300-1400 deg. C in air diluted with nitrogen at different concentrations of oxygen and different steam-air mixture. The experiments were performed using the SETARAM thermo-gravimetric equipment and the FIPRED EQ equipment designed and manufactured especially for this type of experiment. The powders (fragments), resulted from UO 2 pellets self disintegration, were characterized by sieving and SEM. The self disintegration mechanism was demonstrated using the experimental result obtained and thermodynamically data of uranium oxides. (authors)

  8. The Development of Multi-Agent System of State Estimation of Electric Power Systems Using Event Models

    Directory of Open Access Journals (Sweden)

    L. V. Massel

    2015-01-01

    Full Text Available The work objective is to offer a methodological approach to the development of multiagent systems (MAS in the energy sector. The agent approach is declared as an integral part of the Smart Grid concept (intelligent energy systems, but so far there is really neither methodological development and nor implementation in this area. The problem to estimate the states of electric power systems (EPS is one of the most important in the energy sector. Decentralization of calculations, when estimating the EPS states, allows reducing the host control center load and the amount of data transferred through the network.To achieve this aim were used the theory and methods for estimating the EPS state, artificial intelligence techniques, methods of object design and programming, multi-agent technologies, and algebraic Joiner-net network.The work analyses existing agent-based solutions, reveals their weaknesses, and proposes author's approach to MAS development in the energy sector, which includes 5 steps: 1 description of the future system, 2 construction and description of the agent-based scenarios, 3 MAS architecture development 4 MAS engineering design 5 MAS implementation.A novelty of the proposed approach lies in introduction of the agent interaction scenarios and application of Joiner-networks for scripting of scenarios. Agent-based scenarios allow nonprogrammers-experts to change the programme algorithm. A Joiner-network of the scenario consists of the functioning processes of agents (nodes, and the events that trigger or end the process. Output event of one process can be the input event for another.The operation algorithm of the EPS estimation system is developed. The first step is to provide decomposition of a nodalization diagram into the areas corresponding to the levels of node voltages. Then diagrams resulting from decomposition are distributed between the agents of EPS estimation and calculated in parallel. At the next stage, all diagrams are

  9. Waste management state-of-the-art review for mixed-oxide fuel fabrication facilities

    International Nuclear Information System (INIS)

    Woodsum, H.C.; Goodman, J.

    1977-11-01

    This report provides a state-of-the-art review of the waste management for mixed-oxide (MOX) fuel fabrication facilities. The intent of this report is to focus on those processes and regulatory issues which have a direct bearing on existing and anticipated future management of transuranic (TRU) wastes from a commercial MOX fuel fabrication faciity. Recent government agency actions are reviewed with regard to their impact on existing and projected waste management regulations; and it is concluded that acceleration in the development of regulations, standards, and criteria is one of the most important factors in the implementation of improved MOX plant waste management techniques. ERDA development programs pertaining to the management of TRU wastes have been reviewed and many promising methods for volume reduction of both solid and liquid wastes are discussed. For solid wastes, these methods include compaction, shredding and baling, combustion, acid digestion, and decontamination by electropolishing or by electrolytic treatment. For liquid wastes, treatment options include evaporation, drying, calcination, flocculation, ion exchange, filtration, reverse osmosis, combustion (of combustible organics), and bioprocessing. Based on this review, it is recommended that ERDA continue with its combustible solid waste volume reduction program and complete these development activities by 1979. Following this, a critical evaluation of solid waste volume reduction techniques should be made to select the most promising systems for a commercial MOX fuel facility

  10. Native American Arts and Crafts of the United States. Bibliography 1.

    Science.gov (United States)

    Indian Arts and Crafts Board, Washington, DC.

    The selected readings listed in this annotated bibliography are suggested as an introduction to the varied arts and crafts created from prehistoric to modern times by Native American peoples of the United States. The publications are organized by culture area to encompass major media practiced by Native American artists and craftsmen of these…

  11. Building Energy Benchmarking in India: an Action Plan for Advancing the State-of-the-Art

    Energy Technology Data Exchange (ETDEWEB)

    Sarraf, Saket [Centre for Environmental Planning and Technology (CEPT) Univ., Ahmedabad (India); Anand, Shilpi [Centre for Environmental Planning and Technology (CEPT) Univ., Ahmedabad (India); Shukla, Yash [Centre for Environmental Planning and Technology (CEPT) Univ., Ahmedabad (India); Mathew, Paul [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Singh, Reshma [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2014-06-01

    This document describes an action plan for advancing the state of the art of commercial building energy benchmarking in the Indian context. The document is primarily intended for two audiences: (a) Research and development (R&D) sponsors and researchers can use the action plan to frame, plan, prioritize and scope new energy benchmarking R&D in order to ensure that their research is market relevant; (b) Policy makers and program implementers engaged in the deployment of benchmarking and building efficiency rating programmes can use the action plan for policy formulation and enforcement .

  12. State of the art and new developments in molecular diagnostics for hemoglobinopathies in multiethnic societies.

    Science.gov (United States)

    Harteveld, C L

    2014-02-01

    For detecting carriers of thalassemia traits, the basic part of diagnostics consists of measurement of the hematological indices followed by mostly automatic separation and measurement of the Hb fractions, while direct Hb separation either on high pressure liquid chromatography or capillary electrophoresis is sufficient to putatively identify carriers of the common Hb variants like HbS, C, E, D, and O-Arab. A putative positive result is reported together with an advice for parents, partner, or family analysis. For couples, presumed at-risk confirmation at the DNA level is essential. In general, this part of diagnostics is done in specialized centers provided with sufficient experience and the technical tools needed to combine hematological and biochemical interpretation with identification of the mutations at the molecular level. State-of-the-art tools are usually available in centers that also provide prenatal diagnosis and should consist of gap-PCR for the common deletions, direct DNA sequencing for all kind of point-mutations and the capacity to uncover novel or rare mutations or disease mechanisms. New developments are MLPA for large and eventually unknown deletion defects and microarray technology for fine mapping and primer design for breakpoint analysis. Gap-PCR primers designed in the region flanking the deletion breakpoints can subsequently be used to facilitate carrier detection of uncommon deletions in family members or isolated populations in laboratories where no microarray technology or MLPA is available. © 2013 John Wiley & Sons Ltd.

  13. Developing a Speaker Identification System for the DARPA RATS Project

    DEFF Research Database (Denmark)

    Plchot, O; Matsoukas, S; Matejka, P

    2013-01-01

    This paper describes the speaker identification (SID) system developed by the Patrol team for the first phase of the DARPA RATS (Robust Automatic Transcription of Speech) program, which seeks to advance state of the art detection capabilities on audio from highly degraded communication channels. ...... such as CFCCs out-perform MFCC front-ends on noisy audio, and (c) fusion of multiple systems provides 24% relative improvement in EER compared to the single best system when using a novel SVM-based fusion algorithm that uses side information such as gender, language, and channel id....

  14. State of the art on defenses against wormhole attacks in wireless sensor networks

    DEFF Research Database (Denmark)

    Prasad, Neeli R.; Giannetsos, T.; Dimitriou, T.

    2009-01-01

    describe the wormhole attack, a severe routing attack against sensor networks that is particularly challenging to defend against. We detail its characteristics and study its effects on the successful operation of a sensor network. We present state-of-the-art research for addressing wormhole related...... the possibility of using more sophisticated methods, like intrusion detection systems, to achieve a more complete and autonomic defense mechanism against wormhole attackers. We present our work on intrusion detection and introduce a lightweight IDS framework, called LIDeA, designed for wireless sensor networks....... LIDeA is based on a distributed architecture, in which nodes overhear their neighboring nodes and collaborate with each other in order to successfully detect an intrusion. We conclude by highlighting how such a system can be used for defending against wormhole attackers....

  15. Development of decommissioning engineering support system (DEXUS) of the Fugen Nuclear Power Station

    International Nuclear Information System (INIS)

    Iguchi, Yukihiro; Kanehira, Yoshiki; Tochibana, Mitsuo

    2004-01-01

    The Fugen Nuclear Power Station (NPS) was shut down permanently in March 2003, and preparatory activities are underway to decommission the Fugen NPS. An engineering system to support the decommissioning is being developed to create a dismantling plan using state-of-art software such as 3-dimensional computer aided design (3D-CAD) and virtual reality (VR). In particular, an exposure dose evaluation system using VR has been developed and tested. The total system can be used to quantify radioactive waste, to visualize radioactive inventory, to simulate the dismantling plan, to evaluate workload in radiation environments and to optimize the decommissioning plan. The system will also be useful for educating and training workers and for gaining public acceptance. (author)

  16. The development of a Flight Test Engineer's Workstation for the Automated Flight Test Management System

    Science.gov (United States)

    Tartt, David M.; Hewett, Marle D.; Duke, Eugene L.; Cooper, James A.; Brumbaugh, Randal W.

    1989-01-01

    The Automated Flight Test Management System (ATMS) is being developed as part of the NASA Aircraft Automation Program. This program focuses on the application of interdisciplinary state-of-the-art technology in artificial intelligence, control theory, and systems methodology to problems of operating and flight testing high-performance aircraft. The development of a Flight Test Engineer's Workstation (FTEWS) is presented, with a detailed description of the system, technical details, and future planned developments. The goal of the FTEWS is to provide flight test engineers and project officers with an automated computer environment for planning, scheduling, and performing flight test programs. The FTEWS system is an outgrowth of the development of ATMS and is an implementation of a component of ATMS on SUN workstations.

  17. Processing and Analysis of Multichannel Extracellular Neuronal Signals: State-of-the-art and Challenges

    Directory of Open Access Journals (Sweden)

    Mufti eMahmud

    2016-06-01

    Full Text Available In recent years multichannel neuronal signal acquisition systems have allowed scientists to focus on research questions which were otherwise impossible. They act as a powerful means to study brain (dysfunctions in in-vivo and in in-vitro animal models. Typically, each session of electrophysiological experiments with multichannel data acquisition systems generate large amount of raw data. For example, a 128 channel signal acquisition system with 16 bits A/D conversion and 20 kHz sampling rate will generate approximately 17 GB data per hour (uncompressed. This poses an important and challenging problem of inferring conclusions from the large amounts of acquired data. Thus, automated signal processing and analysis tools are becoming a key component in neuroscience research, facilitating extraction of relevant information from neuronal recordings in a reasonable time. The purpose of this review is to introduce the reader to the current state-of-the-art of open-source packages for (semiautomated processing and analysis of multichannel extracellular neuronal signals (i.e., neuronal spikes, local field potentials, electroencephalogram, etc., and the existing Neuroinformatics infrastructure for tool and data sharing. The review is concluded by pinpointing some major challenges that are to be faced, which include the development of novel benchmarking techniques, cloud-based distributed processing and analysis tools, as well as defining novel means to share and standardize data.

  18. Non-EEG seizure detection systems and potential SUDEP prevention: State of the art: Review and update.

    Science.gov (United States)

    Van de Vel, Anouk; Cuppens, Kris; Bonroy, Bert; Milosevic, Milica; Jansen, Katrien; Van Huffel, Sabine; Vanrumste, Bart; Cras, Patrick; Lagae, Lieven; Ceulemans, Berten

    2016-10-01

    Detection of, and alarming for epileptic seizures is increasingly demanded and researched. Our previous review article provided an overview of non-invasive, non-EEG (electro-encephalography) body signals that can be measured, along with corresponding methods, state of the art research, and commercially available systems. Three years later, many more studies and devices have emerged. Moreover, the boom of smart phones and tablets created a new market for seizure detection applications. We performed a thorough literature review and had contact with manufacturers of commercially available devices. This review article gives an updated overview of body signals and methods for seizure detection, international research and (commercially) available systems and applications. Reported results of non-EEG based detection devices vary between 2.2% and 100% sensitivity and between 0 and 3.23 false detections per hour compared to the gold standard video-EEG, for seizures ranging from generalized to convulsive or non-convulsive focal seizures with or without loss of consciousness. It is particularly interesting to include monitoring of autonomic dysfunction, as this may be an important pathophysiological mechanism of SUDEP (sudden unexpected death in epilepsy), and of movement, as many seizures have a motor component. Comparison of research results is difficult as studies focus on different seizure types, timing (night versus day) and patients (adult versus pediatric patients). Nevertheless, we are convinced that the most effective seizure detection systems are multimodal, combining for example detection methods for movement and heart rate, and that devices should especially take into account the user's seizure types and personal preferences. Copyright © 2016 British Epilepsy Association. Published by Elsevier Ltd. All rights reserved.

  19. Dose assessment in environmental radiological protection: State of the art and perspectives.

    Science.gov (United States)

    Stark, Karolina; Goméz-Ros, José M; Vives I Batlle, Jordi; Lindbo Hansen, Elisabeth; Beaugelin-Seiller, Karine; Kapustka, Lawrence A; Wood, Michael D; Bradshaw, Clare; Real, Almudena; McGuire, Corynne; Hinton, Thomas G

    2017-09-01

    Exposure to radiation is a potential hazard to humans and the environment. The Fukushima accident reminded the world of the importance of a reliable risk management system that incorporates the dose received from radiation exposures. The dose to humans from exposure to radiation can be quantified using a well-defined system; its environmental equivalent, however, is still in a developmental state. Additionally, the results of several papers published over the last decade have been criticized because of poor dosimetry. Therefore, a workshop on environmental dosimetry was organized by the STAR (Strategy for Allied Radioecology) Network of Excellence to review the state of the art in environmental dosimetry and prioritize areas of methodological and guidance development. Herein, we report the key findings from that international workshop, summarise parameters that affect the dose animals and plants receive when exposed to radiation, and identify further research needs. Current dosimetry practices for determining environmental protection are based on simple screening dose assessments using knowledge of fundamental radiation physics, source-target geometry relationships, the influence of organism shape and size, and knowledge of how radionuclide distributions in the body and in the soil profile alter dose. In screening model calculations that estimate whole-body dose to biota the shapes of organisms are simply represented as ellipsoids, while recently developed complex voxel phantom models allow organ-specific dose estimates. We identified several research and guidance development priorities for dosimetry. For external exposures, the uncertainty in dose estimates due to spatially heterogeneous distributions of radionuclide contamination is currently being evaluated. Guidance is needed on the level of dosimetry that is required when screening benchmarks are exceeded and how to report exposure in dose-effect studies, including quantification of uncertainties. Further

  20. State Arts Agencies 1965-2003. Whose Interests to Serve?

    National Research Council Canada - National Science Library

    Lowell, Julia

    2004-01-01

    ... (referred to as state arts agencies, or SAAs). In fiscal year (FY) 2003, a record 43 of 56 SAAs reported year-over-year declines in the general fund appropriations budgeted to them by their state legislatures...

  1. Pressure Sensor: State of the Art, Design, and Application for Robotic Hand

    Directory of Open Access Journals (Sweden)

    Ahmed M. Almassri

    2015-01-01

    Full Text Available We survey the state of the art in a variety of force sensors for designing and application of robotic hand. Most of the force sensors are examined based on tactile sensing. For a decade, many papers have widely discussed various sensor technologies and transducer methods which are based on microelectromechanical system (MEMS and silicon used for improving the accuracy and performance measurement of tactile sensing capabilities especially for robotic hand applications. We found that transducers and materials such as piezoresistive and polymer, respectively, are used in order to improve the sensing sensitivity for grasping mechanisms in future. This predicted growth in such applications will explode into high risk tasks which requires very precise purposes. It shows considerable potential and significant levels of research attention.

  2. REALIZING POTENTIAL OF ART IN THE SYSTEM OF ENGINEERING EDUCATION

    Directory of Open Access Journals (Sweden)

    Nataliy Smakovskaya

    2015-12-01

    It tested a pilot program of diagnosis and development of art perception in students of a technical college, and revealed its multifunctional potential – as a tool for mainstreaming subjective creativity in a special space – art communications.

  3. Qualitative Research in Sociology in Germany and the US—State of the Art, Differences and Developments

    Directory of Open Access Journals (Sweden)

    Uwe Flick

    2005-09-01

    Full Text Available The background of this article is the observation that the methodological discussions about qualitative research in sociology in German-speaking and Anglo-Saxon contexts are quite different. The article gives an overview of the state of the art of qualitative research in terms of its methodological development and its establishment in the broader field of social research. After some brief remarks about the history of the field, the major research perspectives and schools of qualit­ative research—grounded theory, ethno­method­ol­ogy, narrative analysis, objective hermeneutic, life-world analysis, ethnography, cultural and gender studies—are outlined against the background of recent developments. The establishment of qualit­ative research is discussed with reference to the examples of the German and International Socio­logical Associations (DGS and ISA, to devel­op­ments in the area of textbooks, handbooks, and to the founding of specialised journals. Methodologi­cal trends such as the turn to visual and electronic data, triangulation of methods and the hybri­di­sa­tion of qualitative procedures, are discussed. In conclusion, some perspectives are outlined which are expected to become more important in the fu­ture of qualitative research or which are seen as demands for further clarification. Besides the use of computers and the further clarification on linking qualitative and quantitative research, and of the limits and problems of such linkage, further sug­gestions concerning the ways of presenting ap­pro­priate and at the same time compulsory criteria for qualitative research are mentioned. Trends in building schools and developing research prag­matics, on the one hand, and a tendency towards elucidation and mystification of methodological procedures, on the other hand, are identified as tensional fields in methodological discussions in qualitative research. Finally, a stronger inter­na­tionalisation in different

  4. E-Learning, State and Educational System in Middle East Countries

    Science.gov (United States)

    Rashidi, Hamid; Arani, Abbas Madandar; Kakia, Lida

    2012-01-01

    E-learning has provided men with new opportunities in teaching-learning procedures. A historical review of educational systems literature reveals that e-learning has spread out among people much faster than any other learning methods. E-learning as a state-of-the-art technology, has caused great innovations in materials development in those…

  5. Pragmatics: The State of the Art: An Online Interview with Keith Allan

    Science.gov (United States)

    Allan, Keith; Salmani Nodoushan, Mohammad Ali

    2015-01-01

    This interview was conducted with Professor Keith Allan with the aim of providing a brief but informative summary of the state of the art of pragmatics. In providing answers to the interview questions, Professor Allan begins with a definition of pragmatics as it is practiced today, i.e., the study of the meanings of utterances with attention to…

  6. Economic Screening of Geologic Sequestration Options in the United States with a Carbon Management Geographic Information System

    Energy Technology Data Exchange (ETDEWEB)

    Dahowski, Robert T.(BATTELLE (PACIFIC NW LAB)); Dooley, James J.(BATTELLE (PACIFIC NW LAB)); Brown, Daryl R.(BATTELLE (PACIFIC NW LAB)); Stephan, Alex J.(BATTELLE (PACIFIC NW LAB)); Badie I. Morsi

    2001-10-19

    Developing a carbon management strategy is a formidable task for nations as well as individual companies. It is often difficult to understand what options are available, let alone determine which may be optimal. In response to the need for a better understanding of complex carbon management options, Battelle has developed a state-of-the-art Geographic Information System (GIS) model with economic screening capability focused on carbon capture and geologic sequestration opportunities in the United States. This paper describes the development of this GIS-based economic screening model and demonstrates its use for carbon management analysis.

  7. State of the art in power cable design, failure mechanisms and testing

    International Nuclear Information System (INIS)

    Orton, H.

    2005-01-01

    This presentation describes state of the art in power cable design, failure mechanisms and testing. It gives a history of cable usage and design of cables, describes different cable types, assessment of the condition of cables, aging and failures, testing and diagnostics

  8. The study of urban systems by indicators. State of the art and implementation problems; Lo studio dei sistemi urbani attraverso indicatori. Stato dell'arte e problematiche operative

    Energy Technology Data Exchange (ETDEWEB)

    Del Ciello, R.; Napoleoni, S. [ENEA, Divisione Caratterizzazione dell' Ambiente e del Territorio, Centro Ricerche Casaccia, S. Maria di Galeria, RM (Italy)

    2001-07-01

    The purpose of this work is to define the state of the art about the problem of the indicators and their capability in reading and foreseeing the urban complexity. Therefore, the theoretical elaborations and the suggestions developed in the report try to convert the different contributions in the Italian and international literature in a frame-work, focusing on those arguments which assume a key role in the study of the urban areas: (a) the problematic definition of the administrative, physics and functional boarders of the cities; (b) the selection of the indicators that describe the urban areas; (c) the description and quality of life and of environment quality in the cities; (d) the sustainability in urban areas. [Italian] Il lavoro si propone di delineare lo stato dell'arte sul problema degli indicatori e sulla loro capacita' di leggere e prevedere la complessita' urbana. Le elaborazioni teoriche e i suggerimenti metodologici sviluppati nel rapporto tentano dunque di tradurre in protocolli di lavoro i diversi contributi prodotti negli ultimi anni nella letteratura italiana e internazionale concentrando in particolare l'attenzione su quei temi che all'interno dello studio dei sistemi urbani assumono un ruolo chiave: (a) la problematica definizione dei confini amministrativi, fisici e funzionali delle citta'; (b) la selezione degli indicatori che descrivono con piu' efficacia il sistema urbano; (c) le dimensioni e la misura della qualita' della vita e dell'ambiente nelle citta'; (d) la sostenibilita' all'interno dei sistemi urbani.

  9. Macro-defect free cements. State of art

    International Nuclear Information System (INIS)

    Holanda, J.N.F.; Povoa, G.E.A.M.; Souza, G.P.; Pinatti, D.G.

    1998-01-01

    The purpose of this work is to prevent a state of art about macro-defect-free cement pastes (MDF cement ) of high mechanical strength. This new type of cement paste is obtained through addition of a water-soluble polymer, followed by intense shear mixing and application of low compacting pressure. It is presented fundamental aspects related to the processing of this MDF paste, as well as its main properties and applications are discussed. (author)

  10. Ionic liquids in protein amyloidogenesis: a brief screenshot of the state-of-the-art.

    Science.gov (United States)

    Pillai, Visakh V S; Benedetto, Antonio

    2018-05-03

    Ionic liquids (ILs) are a vast class of organic non-aqueous electrolytes whose interaction with biomolecules is receiving great attention for potential applications in bio-nano-technology. Recently, it has been shown that ILs can affect protein amyloidogenesis. Whereas some ILs favour the aggregation of proteins into amyloids, others inhibit their formation. Moreover, ILs can dissolve mature fibrils and restore the protein biochemical function. In this letter, we present a brief state-of-the-art summary of this emerging field that holds the promise of important developments both in basic science and in applications from bio-medicine to material science, and bio-nano-technology. The huge variety of ILs offers a vast playground for future studies and potential applications.

  11. Development of Art Appreciation in 11-14 Year-Old Students

    Science.gov (United States)

    Duh, Matjaž; Zupancic, Tomaž; Cagran, Branka

    2014-01-01

    Modern art curricula derive from the assumption that visual arts education can be of a high quality only if productive and receptive artistic activities are implemented. In art education practice, we are able to follow incentives for artistic expression but pay less attention to developing art appreciation that is based on developing as subtle…

  12. Solar control: comparison of two new systems with the state of the art on the basis of a new general evaluation method for facades with venetian blinds or other solar control systems

    Energy Technology Data Exchange (ETDEWEB)

    Kuhn, T.E. [Fraunhofer Institute for Solar Energy Systems ISE, Freiburg (Germany)

    2006-06-15

    The author has developed two new sun-shading systems together with two different companies. These systems are compared with state of the art products on the basis of the new general evaluation method for facades with venetian blinds or other solar control systems that has been presented in detail in [T.E. Kuhn, Solar control: a general evaluation method for facades with venetian blinds or other solar control systems to be used 'stand-alone' or within building simulation programs, Energy Buildings, in press]. The main advantage is that the method can take into account realistic user behaviour (different utilisation modes). Without the new methodology, it would not have been possible to recognise the weaknesses of products which are currently on the market. This recognition was the basis for the design of the two new products: 1. The new stainless steel blind s-enn(Registered Trademark) selectively shields certain regions of the sky. This leads to a transparent appearance while direct insolation of the room and the associated glare is prevented in most cases. 2. The special shape of the 'Genius slats' of a new venetian blind ensures good sun-shading properties which are relatively independent of the actual setting of the slats over broad ranges, which ensures robust performance despite so-called 'faulty operation'. In other words: The performance of the new venetian blind is relatively insensitive to different utilisation modes. (author)

  13. Reforming "developing" health systems: Tanzania, Mexico, and the United States.

    Science.gov (United States)

    Chernichovsky, Dov; Martinez, Gabriel; Aguilera, Nelly

    2009-01-01

    Tanzania, Mexico, and the United States are at vastly different points on the economic development scale. Yet, their health systems can be classified as "developing": they do not live up to their potential, considering the resources available to them. The three, representing many others, share a common structural deficiency: a segregated health care system that cannot achieve its basic goals, the optimal health of its people, and their possible satisfaction with the system. Segregation follows and signifies first and foremost the lack of financial integration in the system that prevents it from serving its goals through the objectives of equity, cost containment and sustainability, efficient production of care and health, and choice. The chapter contrasts the nature of the developing health care system with the common goals', objectives, and principles of the Emerging Paradigm (EP) in developed, integrated--yet decentralized--systems. In this context, the developing health care system is defined by its structural deficiencies, and reform proposals are outlined. In spite of the vast differences amongst the three countries, their health care systems share strikingly similar features. At least 50% of their total funding sources are private. The systems comprise exclusive vertically integrated, yet segregated, "silos" that handle all systemic functions. These reflect and promote wide variations in health insurance coverage and levels of benefits--substantial portions of their populations are without adequate coverage altogether; a considerable lack of income protection from medical spending; an inability to formalize and follow a coherent health policy; a lack of financial discipline that threatens sustainability and overall efficiency; inefficient production of care and health; and an dissatisfied population. These features are often promoted by the state, using tax money, and donors. The situation can be rectified by (a) "centralizing"--at any level of development

  14. Quantifying the development of user-generated art during 2001-2010.

    Science.gov (United States)

    Yazdani, Mehrdad; Chow, Jay; Manovich, Lev

    2017-01-01

    One of the main questions in the humanities is how cultures and artistic expressions change over time. While a number of researchers have used quantitative computational methods to study historical changes in literature, music, and cinema, our paper offers the first quantitative analysis of historical changes in visual art created by users of a social online network. We propose a number of computational methods for the analysis of temporal development of art images. We then apply these methods to a sample of 270,000 artworks created between 2001 and 2010 by users of the largest social network for art-DeviantArt (www.deviantart.com). We investigate changes in subjects, techniques, sizes, proportions and also selected visual characteristics of images. Because these artworks are classified by their creators into two general categories-Traditional Art and Digital Art-we are also able to investigate if the use of digital tools has had a significant effect on the content and form of artworks. Our analysis reveals a number of gradual and systematic changes over a ten-year period in artworks belonging to both categories.

  15. Energy demand’s state of art until the first lustrum of the 90s.

    Directory of Open Access Journals (Sweden)

    Néstor Juan Sanabria Landazábal

    2008-07-01

    Full Text Available The change in the theoretical ways to understand the phenomena is coupled with the complexity that they develop by themselves. At the same time, instrumental ways needed to measure are being developed. So it is possible to see substantive changes in the way to measure the demand for residential electric power. It will move from large aggregates to the use of microdata. From a functional log-linear form to the incorporation of the asymmetries, through the binary choice and design that made that the power is equivalent to an intermediate service as it serves to produce goods or services at home. It was also reported a widespread use of time series and co integration analysis. But even at the time this state of art is described, many of the themes of this type of demand are not solved and developments after 1994, in Colombia will give another meaning to the use of electricity.

  16. Hydrogen storage: state-of-the-art and future perspective

    International Nuclear Information System (INIS)

    Tzimas, E.; Filiou, C.; Peteves, S.D.; Veyret, J.B.

    2003-01-01

    The EU aims at establishing a sustainable energy supply, able to provide affordable and clean energy without increasing green house gas emissions. Hydrogen and fuel cells are seen by many as key energy system solutions for the 21. century, enabling clean and efficient production of power and heat from a broad range of primary energy sources. To be effective, there is a crucial need for well-coordinated research, development and deployment at European Level. The particular segment of hydrogen storage is one key element of the full hydrogen chain and it must meet a number of challenges before it is introduced into the global energy system. Regarding its energy characteristics, the gravimetric energy density of hydrogen is about three times higher than gasoline, but its energy content per volume is about a quarter. Therefore, the most significant problem for hydrogen (in particular for on-board vehicles) is to store sufficient -amounts of hydrogen. The volumetric energy density of hydrogen can be increased by compression or liquefaction which are both the most mature technologies. Still the energy required for both compression and liquefaction is one element to be properly assessed in considering the different pathways in particular for distribution. As far as on-board vehicle storage is concerned all possible options (compressed, liquid, metal hydrides and porous structures) have their own advantages and disadvantages with respect to weight, volume, energy efficiency, refuelling times, cost and safety aspects. To address these problems, long-term commitments to scientific excellence in research, coupled with co-ordination between the many different stakeholders, is required. In the current state-of-the-art in hydrogen storage, no single technology satisfies all of the criteria required by manufacturers and end-users, and a large number of obstacles have to be overcome. The current hydrogen storage technologies and their associated limitations/needs for improvement

  17. Bidirectional Texture Function Modeling: State of the Art Survey

    Czech Academy of Sciences Publication Activity Database

    Filip, Jiří; Haindl, Michal

    2009-01-01

    Roč. 31, č. 11 (2009), s. 1921-1940 ISSN 0162-8828 R&D Projects: GA MŠk 1M0572; GA ČR GA102/08/0593; GA AV ČR 1ET400750407 Grant - others:EC Marie Curie(BE) 41358; GA MŠk(CZ) 2C06019 Institutional research plan: CEZ:AV0Z10750506 Keywords : BTF * surface texture * 3D texture Subject RIV: BD - Theory of Information Impact factor: 4.378, year: 2009 http://library.utia.cas.cz/separaty/2009/RO/filip-bidirectional texture function modeling state of the art survey.pdf

  18. TALENT DEVELOPMENT IN THE WORLD OF CLASSICAL MUSIC AND VISUAL ARTS

    Directory of Open Access Journals (Sweden)

    Linda Jarvin

    2017-12-01

    Full Text Available In this article, we propose to explore the developmental trajectories of children displaying gifts and abilities in the domains of (classical music and in visual arts. A developmental model for talent development that was developed in the domain of classical music will be briefly presented and its applicability in the field of visual arts will be discussed.

  19. Study on Multimedia Art Teaching Resources Management System based on Internet Technology

    Directory of Open Access Journals (Sweden)

    Pan Bao Quan

    2016-01-01

    Full Text Available The main technical architecture of art teaching management system was developed on B/S model in order to help implement the network to share teaching resources. System page of Dreamweaver web page was design software, the background for using SQL Server 2000 database design, the use of ASP, ADO data combined with multimedia data transmission technology for art teaching resources system was realized.

  20. Drawing after the Antique at the British Museum, 1809–1817: “Free” Art Education and the Advent of the Liberal State

    Directory of Open Access Journals (Sweden)

    Martin Myrone

    2017-04-01

    Full Text Available From 1808 the British Museum in London began regularly to open its newly established Townley Gallery so that art students could draw from the ancient sculptures housed there. This article documents and comments on this development in art education, based on an analysis of the 165 individuals recorded in the surviving register of attendance at the Museum, covering the period 1809–17. The register is presented as a photographic record, with a transcription and biographical directory. The accompanying essay situates the opening of the Museum’s sculpture rooms to students within a far-reaching set of historical shifts. It argues that this new museum access contributed to the early nineteenth-century emergence of a liberal state. But if the rhetoric surrounding this development emphasized freedom and general public benefit in the spirit of liberalization, the evidence suggests that this new level of access actually served to further entrench the “middle-classification” of art education at this historical juncture.

  1. CryoSat Plus for Oceans - analysis of the state-of-the-art

    Science.gov (United States)

    Naeije, Marc; Gommenginger, Christine; Moreau, Thomas; Cotton, David; Benveniste, Jerome; Dinardo Dinardo, Salvatore

    2013-04-01

    The CryoSat Plus for Oceans (CP4O) project is an ESA initiative carried out by a European wide consortium of altimetry experts. It aims to build a sound scientific basis for new scientific and operational applications of data coming from CryoSat-2 over the open ocean, polar ocean, coastal seas and for seafloor mapping. It also generates and evaluates new methods and products that will enable the full exploitation of the capabilities of the CryoSat-2 SIRAL altimeter, and extend their application beyond the initial mission objectives. It therefore also acts as a preparation for the upcoming Sentinel and Jason SAR enabled altimetry missions. In this paper we address the review of the CryoSat state-of-the-art, relevant current initiatives, algorithms, models and Earth Observation based products and datasets that are relevant in the Cryosat+ ocean theme. Compared to conventional (pulse-limited) altimeter missions, Cryosat-2 is not a dedicated platform for ocean research: typically the microwave radiometer (MWR) for wet tropospheric corrections is lacking, as is the direct measurement of the first order ionospheric effect by means of a dual-frequency altimeter. Also the orbit of Cryosat-2 has a rather long repetition period, unsuited for collinear tracks analyses. These three particular features have been studied already in the HERACLES project on the eve of the first CryoSat launch. We revisit the outcome of this study, update to current understanding and perception, and ultimately develop what was, is and will be proposed in these problem areas. Clearly, we question the standard ionosphere corrections, the wet troposphere corrections and the accuracy of the mean sea surface (MSS) underlying the accuracy of derived sea level anomalies. In addition, Cryosat-2 provides the first innovative altimeter with SAR and SARIn modes. This raises the direct problem of "how to process these data", simply because this has not been done before. Compared to pulse-limited altimetry it

  2. State of the art and the dark side of amyotrophic lateral sclerosis

    Institute of Scientific and Technical Information of China (English)

    Antonio; Musarò

    2010-01-01

    Amyotrophic lateral sclerosis(ALS) is a disorder that involves the degeneration of motor neurons,muscle atrophy,and paralysis.In a few familiar forms of ALS,mutations in the superoxide dismutase-1(SOD1) gene have been held responsible for the degeneration of motor neurons.Nevertheless,after the discovery of the SOD1 mutations no consensus has emerged as to which cells,tissues and pathways are primarily implicated in the pathogenic events that lead to ALS.Ubiquitous overexpression of mutant SOD1 in transgenic animals recapitulates the pathological features of ALS.However,the toxicity of mutant SOD1 is not necessarily limited to the central nervous system.Views about ALS pathogenesis are now enriched by the recent discovery of mutations in a pair of DNA/RNA-binding proteins called TDP-43 and FUS/TLS as causes of familial and sporadic forms of ALS.Although the steps that lead to the pathological state are well defined,several fundamental issues are still controversial:are the motor neurons the first direct targets of ALS;and what is the contribution of non-neuronal cells,if any,to the pathogenesis of ALS?The state of the art of ALS pathogenesis and the open questions are discussed in this review.

  3. State of the Art Review: Poverty and the Developing Brain

    Science.gov (United States)

    Riis, Jenna L.; Noble, Kimberly G.

    2016-01-01

    In the United States, >40% of children are either poor or near-poor. As a group, children in poverty are more likely to experience worse health and more developmental delay, lower achievement, and more behavioral and emotional problems than their more advantaged peers; however, there is broad variability in outcomes among children exposed to similar conditions. Building on a robust literature from animal models showing that environmental deprivation or enrichment shapes the brain, there has been increasing interest in understanding how the experience of poverty may shape the brain in humans. In this review, we summarize research on the relationship between socioeconomic status and brain development, focusing on studies published in the last 5 years. Drawing on a conceptual framework informed by animal models, we highlight neural plasticity, epigenetics, material deprivation (eg, cognitive stimulation, nutrient deficiencies), stress (eg, negative parenting behaviors), and environmental toxins as factors that may shape the developing brain. We then summarize the existing evidence for the relationship between child poverty and brain structure and function, focusing on brain areas that support memory, emotion regulation, and higher-order cognitive functioning (ie, hippocampus, amygdala, prefrontal cortex) and regions that support language and literacy (ie, cortical areas of the left hemisphere). We then consider some limitations of the current literature and discuss the implications of neuroscience concepts and methods for interventions in the pediatric medical home. PMID:26952506

  4. Physics of laser fusion. Volume IV. The future development of high-power solid-state laser systems

    International Nuclear Information System (INIS)

    Emmett, J.L.; Krupke, W.F.; Trenholme, J.B.

    1982-11-01

    Solid state lasers, particularly neodymium glass systems, have undergone intensive development during the last decade. In this paper, we review solid state laser technology in the context of high-peak-power systems for inertial confinement fusion. Specifically addressed are five major factors: efficiency, wavelength flexibility, average power, system complexity, and cost; these factors today limit broader application of the technology. We conclude that each of these factors can be greatly improved within current fundamental physical limits. We further conclude that the systematic development of new solid state laser madia, both vitreous and crystalline, should ultimately permit the development of wavelength-flexible, very high average power systems with overall efficiencies in the range of 10 to 20%

  5. State of the art on historic building insulation materials and retrofit strategies

    DEFF Research Database (Denmark)

    Blumberga, Andra; Kass, Kristaps; Kamendere, Edite

    2016-01-01

    This report provides an analysis and evaluation of a state-of-the-art of internal insulation materials and methods for application in historic buildings, and review on methods, tools and guidelines used as decision making tools for implementation of internal insulation in historic buildings. Hist...

  6. A Webcast of Bird Nesting as a State-of-the-Art Citizen Science.

    Science.gov (United States)

    Zárybnická, Markéta; Sklenicka, Petr; Tryjanowski, Piotr

    2017-01-01

    The quality of people's knowledge of nature has always had a significant influence on their approach to wildlife and nature conservation. However, direct interactions of people with nature are greatly limited nowadays, especially because of urbanization and modern lifestyles. As a result, our isolation from the natural world has been growing. Here, we present an example of a state-of-the-art Citizen Science project with its educational, scientific, and popularizing benefits. We conclude that modern media and new forms of education offer an effective opportunity for inspiring children and others to have fun learning to act like scientists. This approach provides broad opportunities for developing the hitherto neglected educational potential of Citizen Science.

  7. Assessment of state-of-the-art dust emission scheme in GEOS

    Science.gov (United States)

    Darmenov, A.; Liu, X.; Prigent, C.

    2017-12-01

    The GEOS modeling system has been extended with state-of-the-art parameterization of dust emissions based on the vertical flux formulation described in Kok et al., 2014. The new dust scheme was coupled with the GOCART and MAM aerosol models. In the present study we compared dust emissions, aerosol optical depth (AOD) and radiative fluxes from GEOS experiments with the standard and new dust emissions. AOD from the model experiments were also compared with AERONET and satellite based AOD product. Based on this comparative analysis we concluded that the new parameterization improved the GEOS capability to model dust aerosols originating from African sources, however it led to overestimation of dust emissions from Asian and Middle-Eastern sources. Further regional tuning of key parameters controlling the threshold friction velocity may be required in order to attain more definitive and uniform improvement in the dust modeling skill with the newly implemented dust emissions scheme.

  8. Trends in Vocational Education in the Arts 1980. Fast Response Survey System.

    Science.gov (United States)

    Wright, Douglas A.; Farris, Elizabeth

    A study examined the nature and extent of vocational arts education programs throughout the 50 states. During the study, data were sought concerning those programs designed to prepare students for occupations in 14 arts areas: dance; vocal music; instrumental music; theater; radio, television, and video; cinematography; photography; graphic arts;…

  9. The SESAME project. State of the art liquid metal thermal hydraulics and beyond

    Energy Technology Data Exchange (ETDEWEB)

    Roelofs, F.; Shams, A.; Batta, A.; Moreau, V.; Di Piazza, I.; Gerschenfeld, A.; Planquart, P.; Tarantino, M. [Nuclear Research and Consultancy Group (NRG), Petten (Netherlands)

    2017-08-15

    The European Sustainable Nuclear Industry Initiative (ESNII) aims at industrial application of fast reactor technology for a sustainable nuclear energy production. Currently four demonstration projects have a promising outlook in Europe, i.e. the ASTRID project in France, the MYRRHA project in Belgium, the ALFRED pan-European project to be realized in Romania, and SEALER in Sweden. Sodium and lead(-alloys) are envisaged as coolants for these reactors. Obviously, in the development of these reactors, thermal-hydraulics is recognized as a key challenge with emphasis on safety issues. This paper discusses the state-of-the-art knowledge with respect to experiments and simulation techniques as pursued in the Horizon 2020 SESAME (thermal hydraulics Simulations and Experiments for the Safety Assessment of MEtal cooled reactors) project.

  10. Plugging wells for abandonment: a state-of-the-art study and recommended procedures

    International Nuclear Information System (INIS)

    Herndon, J.; Smith, D.K.

    1976-09-01

    The state-of-the-art of borehole plugging of abandoned oil wells and the tools and materials used are discussed. Special problems encountered are considered and several case studies are outlined. The special procedures which must be followed if the plugged borehole is to be considered as a repository for radioactive wastes are discussed and special recommendations are made. A state-by-state summary is given of the regulatory requirements for borehole plugging

  11. State-of-the-art radiation detectors for medical imaging: Demands and trends

    International Nuclear Information System (INIS)

    Darambara, Dimitra G.

    2006-01-01

    Over the last half-century a variety of significant technical advances in several scientific fields has been pointing to an exploding growth in the field of medical imaging leading to a better interpretation of more specific anatomical, biochemical and molecular pathways. In particular, the development of novel imaging detectors and readout electronics has been critical to the advancement of medical imaging allowing the invention of breakthrough platforms for simultaneous acquisition of multi-modality images at molecular level. The present paper presents a review of the challenges, demands and constraints on radiation imaging detectors imposed by the nature of the modality and the physics of the imaging source. This is followed by a concise review and perspective on various types of state-of-the-art detector technologies that have been developed to meet these requirements. Trends, prospects and new concepts for future imaging detectors are also highlighted

  12. State-of-the-art radiation detectors for medical imaging: Demands and trends

    Energy Technology Data Exchange (ETDEWEB)

    Darambara, Dimitra G. [Joint Department of Physics, Royal Marsden Foundation Trust and Institute of Cancer Research, Fulham Road, London SW3 6JJ (United Kingdom)]. E-mail: dimitra.darambara@icr.ac.uk

    2006-12-20

    Over the last half-century a variety of significant technical advances in several scientific fields has been pointing to an exploding growth in the field of medical imaging leading to a better interpretation of more specific anatomical, biochemical and molecular pathways. In particular, the development of novel imaging detectors and readout electronics has been critical to the advancement of medical imaging allowing the invention of breakthrough platforms for simultaneous acquisition of multi-modality images at molecular level. The present paper presents a review of the challenges, demands and constraints on radiation imaging detectors imposed by the nature of the modality and the physics of the imaging source. This is followed by a concise review and perspective on various types of state-of-the-art detector technologies that have been developed to meet these requirements. Trends, prospects and new concepts for future imaging detectors are also highlighted.

  13. Component configuration control system development at EBR-II

    International Nuclear Information System (INIS)

    Monson, L.R.; Stratton, R.C.

    1984-01-01

    One ofthe major programs being pursued by the EBR-II Division of Argonne National Laboratory is to improve the reliability of plant control and protection systems. This effort involves looking closely at the present state of the art and needs associated with plant diagnostic, control and protection systems. One of the areas of development at EBR-II involves a component configuration control system (CCCS). This system is a computerized control and planning aid for the nuclear power operator

  14. USING THE MEANS OF THEATRE ART TO DEVELOP MODERN TEACHERS’ RHETORICAL CULTURE

    Directory of Open Access Journals (Sweden)

    Dmytro Budianskyi

    2017-04-01

    Full Text Available The article examines an important problem of modern education – the use of theatre arts to improve the teachers’ oratorical skills. In the pedagogical context the main categories of theatre pedagogy (co-creation, reincarnation, tempo, rhythm, mise-en-scène, etc. are discussed in details. Thus the congruence of teaching and dramatic art is found out. The essence of artistry is determined as an element of a teacher’s rhetorical culture. The contents, structural elements of Stanislavsky system and their use for developing the teacher’s rhetorical culture are analyzed. The author discusses in details the two main components of Stanislavsky system: an actor’s work itself and the actor’s work on the role. It is proved that both parts of this system with a few adjustments correspond to