WorldWideScience

Sample records for state review process

  1. State technical review of the HLNW program and the peer review process

    International Nuclear Information System (INIS)

    Jacob, G.R.

    1986-01-01

    Millions of dollars are being spent on state governments' review of the Department of Energy (DOE) high level waste (HLW) repository program. A significant portion of the review efforts focus on technical issues surrounding the development and installment of HLW disposal technologies. Some view the states' technical review efforts as part of a peer review process. However, this interpretation reveals a misunderstanding of the concept of peer review and the purposes of state technical review

  2. Environmental review process: The U.S. experience

    International Nuclear Information System (INIS)

    Russo, T.N.

    1993-01-01

    The environmental review process used by the United States Federal Energy Regulatory Commission was discussed. The process has enabled the Commission to assess proposed small hydropower projects, but in the view of the author the Commission has done so at considerable cost and time to developers. Principal reasons for the delays and additional costs were examined, and ways were suggested that developers, agencies, regulators and other stakeholders could facilitate the siting of small hydropower projects without sacrificing the quality of the environmental review process. The highly duplicative nature of the environmental review process for hydropower projects was highlighted. The Commissions's power to regulate hydropower was claimed to have become severely eroded and the Energy Policy Act of 1992 did not significantly improve the process. Conflicts between developers, federal and state agencies, and the Commission over jurisdiction and interpretation of statutes continue to cause siting delays, which could render many projects financially infeasible. A more proactive Federal Energy Regulatory Commission was suggested to work with developers, agencies, Indian tribes and non-government organizations to resolve disputes. 1 tab

  3. 21st Century Parent-Child Sex Communication in the United States: A Process Review.

    Science.gov (United States)

    Flores, Dalmacio; Barroso, Julie

    Parent-child sex communication results in the transmission of family expectations, societal values, and role modeling of sexual health risk-reduction strategies. Parent-child sex communication's potential to curb negative sexual health outcomes has sustained a multidisciplinary effort to better understand the process and its impact on the development of healthy sexual attitudes and behaviors among adolescents. This review advances what is known about the process of sex communication in the United States by reviewing studies published from 2003 to 2015. We used the Cumulative Index to Nursing and Allied Health Literature (CINAHL), PsycINFO, SocINDEX, and PubMed, and the key terms "parent child" AND "sex education" for the initial query; we included 116 original articles for analysis. Our review underscores long-established factors that prevent parents from effectively broaching and sustaining talks about sex with their children and has also identified emerging concerns unique to today's parenting landscape. Parental factors salient to sex communication are established long before individuals become parents and are acted upon by influences beyond the home. Child-focused communication factors likewise describe a maturing audience that is far from captive. The identification of both enduring and emerging factors that affect how sex communication occurs will inform subsequent work that will result in more positive sexual health outcomes for adolescents.

  4. 76 FR 13553 - Application, Review, and Reporting Process for Waivers for State Innovation

    Science.gov (United States)

    2011-03-14

    ... State Innovation AGENCY: Centers for Medicare & Medicaid Services (CMS), HHS; Department of the Treasury... review of initial applications for a Waiver for State Innovation described in section 1332 of the Patient... State Innovation, Room 3050, Department of the Treasury, 1500 Pennsylvania Avenue, NW., Washington, DC...

  5. Streamlining the license renewal review process

    International Nuclear Information System (INIS)

    Dozier, J.; Lee, S.; Kuo, P.T.

    2001-01-01

    The staff of the NRC has been developing three regulatory guidance documents for license renewal: the Generic Aging Lessons Learned (GALL) report, Standard Review Plan for License Renewal (SRP-LR), and Regulatory Guide (RG) for Standard Format and Content for Applications to Renew Nuclear Power Plant Operating Licenses. These documents are designed to streamline the license renewal review process by providing clear guidance for license renewal applicants and the NRC staff in preparing and reviewing license renewal applications. The GALL report systematically catalogs aging effects on structures and components; identifies the relevant existing plant programs; and evaluates the existing programs against the attributes considered necessary for an aging management program to be acceptable for license renewal. The GALL report also provides guidance for the augmentation of existing plant programs for license renewal. The revised SRP-LR allows an applicant to reference the GALL report to preclude further NRC staff evaluation if the plant's existing programs meet the criteria described in the GALL report. During the review process, the NRC staff will focus primarily on existing programs that should be augmented or new programs developed specifically for license renewal. The Regulatory Guide is expected to endorse the Nuclear Energy Institute (NEI) guideline, NEI 95-10, Revision 2, entitled 'Industry Guideline for Implementing the Requirements of 10 CFR Part 54 - The License Renewal Rule', which provides guidance for preparing a license renewal application. This paper will provide an introduction to the GALL report, SRP-LR, Regulatory Guide, and NEI 95-10 to show how these documents are interrelated and how they will be used to streamline the license renewal review process. This topic will be of interest to domestic power utilities considering license renewal and international ICONE participants seeking state-of-the-art information about license renewal in the United States

  6. Microencapsulation by solvent extraction/evaporation: reviewing the state of the art of microsphere preparation process technology.

    Science.gov (United States)

    Freitas, Sergio; Merkle, Hans P; Gander, Bruno

    2005-02-02

    The therapeutic benefit of microencapsulated drugs and vaccines brought forth the need to prepare such particles in larger quantities and in sufficient quality suitable for clinical trials and commercialisation. Very commonly, microencapsulation processes are based on the principle of so-called "solvent extraction/evaporation". While initial lab-scale experiments are frequently performed in simple beaker/stirrer setups, clinical trials and market introduction require more sophisticated technologies, allowing for economic, robust, well-controllable and aseptic production of microspheres. To this aim, various technologies have been examined for microsphere preparation, among them are static mixing, extrusion through needles, membranes and microfabricated microchannel devices, dripping using electrostatic forces and ultrasonic jet excitation. This article reviews the current state of the art in solvent extraction/evaporation-based microencapsulation technologies. Its focus is on process-related aspects, as described in the scientific and patent literature. Our findings will be outlined according to the four major substeps of microsphere preparation by solvent extraction/evaporation, namely, (i) incorporation of the bioactive compound, (ii) formation of the microdroplets, (iii) solvent removal and (iv) harvesting and drying the particles. Both, well-established and more advanced technologies will be reviewed.

  7. Processing emotional body expressions: state-of-the-art.

    Science.gov (United States)

    Enea, Violeta; Iancu, Sorina

    2016-10-01

    Processing emotional body expressions has become recently an important topic in affective and social neuroscience along with the investigation of facial expressions. The objective of the study is to review the literature on emotional body expressions in order to discuss the current state of knowledge on this topic and identify directions for future research. The following electronic databases were searched: PsychINFO, Ebsco, ERIC, ProQuest, Sagepub, and SCOPUS using terms such as "body," "bodily expression," "body perception," "emotions," "posture," "body recognition" and combinations of them. The synthesis revealed several research questions that were addressed in neuroimaging, electrophysiological and behavioral studies. Among them, one important question targeted the neural mechanisms of emotional processing of body expressions to specific subsections regarding the time course for the integration of emotional signals from face and body, as well as the role of context in the perception of emotional signals. Processing bodily expression of emotion is similar to processing facial expressions, and the holistic processing is extended to the whole person. The current state-of-the-art in processing emotional body expressions may lead to a better understanding of the underlying neural mechanisms of social behavior. At the end of the review, suggestions for future research directions are presented.

  8. Energy issues in microwave food processing: A review of developments and the enabling potentials of solid-state power delivery.

    Science.gov (United States)

    Atuonwu, J C; Tassou, S A

    2018-01-23

    The enormous magnitude and variety of microwave applications in household, commercial and industrial food processing creates a strong motivation for improving the energy efficiency and hence, sustainability of the process. This review critically assesses key energy issues associated with microwave food processing, focusing on previous energy performance studies, energy performance metrics, standards and regulations. Factors affecting energy-efficiency are categorised into source, load and source-load matching factors. This highlights the need for highly-flexible and controllable power sources capable of receiving real-time feedback on load properties, and effecting rapid control actions to minimise reflections, heating non-uniformities and other imperfections that lead to energy losses. A case is made for the use of solid-state amplifiers as alternatives to conventional power sources, magnetrons. By a full-scale techno-economic analysis, including energy aspects, it is shown that the use of solid-state amplifiers as replacements to magnetrons is promising, not only from an energy and overall technical perspective, but also in terms of economics.

  9. Periodic Safety Review of Nuclear Power Plants: Experience of Member States

    International Nuclear Information System (INIS)

    2010-04-01

    Routine reviews of nuclear power plant operation (including modifications to hardware and procedures, operating experience, plant management and personnel competence) and special reviews following major events of safety significance are the primary means of safety verification. In addition, many Member States of the IAEA have initiated systematic safety reassessments, termed periodic safety reviews, of nuclear power plants, to assess the cumulative effects of plant ageing and plant modifications, operating experience, technical developments and siting aspects. The reviews include an assessment of plant design and operation against current safety standards and practices, and they have the objective of ensuring a high level of safety throughout the plant's operating lifetime. They are complementary to the routine and special safety reviews and do not replace them. Periodic safety reviews of nuclear power plants are considered an effective way to obtain an overall view of actual plant safety, and to determine reasonable and practical modifications that should be made in order to maintain a high level of safety. They can be used as a means of identifying time limiting features of the plant in order to determine nuclear power plant operation beyond the designed lifetime. The periodic safety review process can be used to support the decision making process for long term operation or licence renewal. Since 1994, the use of periodic safety reviews by Member States has substantially broadened and confirmed its benefits. Periodic safety review results have, for example, been used by some Member States to help provide a basis for continued operation beyond the current licence term, to communicate more effectively with stakeholders regarding nuclear power plant safety, and to help identify changes to plant operation that enhance safety. This IAEA-TECDOC is intended to assist Member States in the implementation of a periodic safety review. This publication complements the

  10. 45 CFR 147.136 - Internal claims and appeals and external review processes.

    Science.gov (United States)

    2010-10-01

    ..., appropriateness, health care setting, level of care, or effectiveness of a covered benefit. (ii) The State process... pay the cost of the IRO for conducting the external review. Notwithstanding this requirement, the... not impose, for example, a $500 minimum claims threshold. (vi) The State process must allow at least...

  11. Quality Assurance for Distance Education: A Faculty Peer Review Process.

    Science.gov (United States)

    Ross, Kathryn R.; Batzer, Lyn; Bennington, Elaine

    2002-01-01

    Discusses the need for quality assurance in distance education; describes evaluation criteria; and reports how Ivy Tech State College (Indiana) created a peer review process as a formative evaluation tool to assure the quality of its distance education courses. Explains roles of the participants and evaluation of the peer review prototype. (LRW)

  12. Moral Judgment as Information Processing: An Integrative Review

    Directory of Open Access Journals (Sweden)

    Steve eGuglielmo

    2015-10-01

    Full Text Available This article reviews dominant models of moral judgment, organizing them within an overarching framework of information processing. This framework poses two fundamental questions: (1 What input information guides moral judgments?; and (2 What psychological processes generate these judgments? Information Models address the first question, identifying critical information elements (including causality, intentionality, and mental states that shape moral judgments. A subclass of Biased Information Models holds that perceptions of these information elements are themselves driven by prior moral judgments. Processing Models address the second question, and existing models have focused on the relative contribution of intuitive versus deliberative processes. This review organizes existing moral judgment models within this framework, critically evaluates them on empirical and theoretical grounds, outlines a general integrative model grounded in information processing, and offers conceptual and methodological suggestions for future research. The information processing perspective provides a useful theoretical framework for organizing extant and future work in the rapidly growing field of moral judgment.

  13. States in Process Calculi

    Directory of Open Access Journals (Sweden)

    Christoph Wagner

    2014-08-01

    Full Text Available Formal reasoning about distributed algorithms (like Consensus typically requires to analyze global states in a traditional state-based style. This is in contrast to the traditional action-based reasoning of process calculi. Nevertheless, we use domain-specific variants of the latter, as they are convenient modeling languages in which the local code of processes can be programmed explicitly, with the local state information usually managed via parameter lists of process constants. However, domain-specific process calculi are often equipped with (unlabeled reduction semantics, building upon a rich and convenient notion of structural congruence. Unfortunately, the price for this convenience is that the analysis is cumbersome: the set of reachable states is modulo structural congruence, and the processes' state information is very hard to identify. We extract from congruence classes of reachable states individual state-informative representatives that we supply with a proper formal semantics. As a result, we can now freely switch between the process calculus terms and their representatives, and we can use the stateful representatives to perform assertional reasoning on process calculus models.

  14. State Program Integrity Reviews

    Data.gov (United States)

    U.S. Department of Health & Human Services — State program integrity reviews play a critical role in how CMS provides effective support and assistance to states in their efforts to combat provider fraud and...

  15. PRISM Software: Processing and Review Interface for Strong‐Motion Data

    Science.gov (United States)

    Jones, Jeanne M.; Kalkan, Erol; Stephens, Christopher D.; Ng, Peter

    2017-01-01

    A continually increasing number of high‐quality digital strong‐motion records from stations of the National Strong Motion Project (NSMP) of the U.S. Geological Survey, as well as data from regional seismic networks within the United States, calls for automated processing of strong‐motion records with human review limited to selected significant or flagged records. The NSMP has developed the Processing and Review Interface for Strong Motion data (PRISM) software to meet this need. In combination with the Advanced National Seismic System Quake Monitoring System (AQMS), PRISM automates the processing of strong‐motion records. When used without AQMS, PRISM provides batch‐processing capabilities. The PRISM software is platform independent (coded in Java), open source, and does not depend on any closed‐source or proprietary software. The software consists of two major components: a record processing engine composed of modules for each processing step, and a review tool, which is a graphical user interface for manual review, edit, and processing. To facilitate use by non‐NSMP earthquake engineers and scientists, PRISM (both its processing engine and review tool) is easy to install and run as a stand‐alone system on common operating systems such as Linux, OS X, and Windows. PRISM was designed to be flexible and extensible to accommodate implementation of new processing techniques. All the computing features have been thoroughly tested.

  16. State Program Integrity Review Reports List

    Data.gov (United States)

    U.S. Department of Health & Human Services — Comprehensive state program integrity (PI) review reports (and respective follow-up review reports) provide CMS assessment of the effectiveness of the states PI...

  17. United States electric industry : restructuring in review

    International Nuclear Information System (INIS)

    Slocum Hollis, S.

    2004-01-01

    This paper provides a detailed review of the United States electric power industry. The aim of the review was to clarify and better define current industry procedures and practices in light of significant and recent restructuring. In addition, recent bankruptcies and the power blackout in 2003 have raised concerns over industry practices. Issues concerning Independent System Operators (ISO) and regional transmission organizations were evaluated, with reference to an evolution and implementation of Regional Transmission Organization (RTO) policy, including a cost-benefit analysis. A background of RTO formations was provided with reference to consolidation, selection process and transfer of assets. Standard market design, network access and pricing issues were reviewed, as well as market and reliability concerns. Issues concerning affiliate treatment, shortages and the effect of sale of securities were presented. Various approaches to congestion management were examined, with examples from California and New England. Market monitoring issues, investigations and hearings were also examined, with examples and orders, including details of refunds. Measures to improve reliability were reviewed, including: management systems, benefit margins, requirements, assurance agreements and reserve markets. Issues concerning information access were presented, including: Open Access Same-time Information System (OASIS) requirements; tagging; standard business practices and protocols; and quarterly report practices and protocols. Interconnection policies were reviewed with reference to applicability, service options and pricing. The issue of variations was examined, with case examples concerning cost allocation, contract rights and treatment of specific costs. Jurisdiction issues concerning corporate realignments and power exchanges were presented, as well as specific services and state-federal relations. Issues concerning mergers and merger policy were also discussed, with reference

  18. Moral judgment as information processing: an integrative review.

    Science.gov (United States)

    Guglielmo, Steve

    2015-01-01

    How do humans make moral judgments about others' behavior? This article reviews dominant models of moral judgment, organizing them within an overarching framework of information processing. This framework poses two distinct questions: (1) What input information guides moral judgments? and (2) What psychological processes generate these judgments? Information Models address the first question, identifying critical information elements (including causality, intentionality, and mental states) that shape moral judgments. A subclass of Biased Information Models holds that perceptions of these information elements are themselves driven by prior moral judgments. Processing Models address the second question, and existing models have focused on the relative contribution of intuitive versus deliberative processes. This review organizes existing moral judgment models within this framework and critically evaluates them on empirical and theoretical grounds; it then outlines a general integrative model grounded in information processing, and concludes with conceptual and methodological suggestions for future research. The information-processing framework provides a useful theoretical lens through which to organize extant and future work in the rapidly growing field of moral judgment.

  19. Moral judgment as information processing: an integrative review

    Science.gov (United States)

    Guglielmo, Steve

    2015-01-01

    How do humans make moral judgments about others’ behavior? This article reviews dominant models of moral judgment, organizing them within an overarching framework of information processing. This framework poses two distinct questions: (1) What input information guides moral judgments? and (2) What psychological processes generate these judgments? Information Models address the first question, identifying critical information elements (including causality, intentionality, and mental states) that shape moral judgments. A subclass of Biased Information Models holds that perceptions of these information elements are themselves driven by prior moral judgments. Processing Models address the second question, and existing models have focused on the relative contribution of intuitive versus deliberative processes. This review organizes existing moral judgment models within this framework and critically evaluates them on empirical and theoretical grounds; it then outlines a general integrative model grounded in information processing, and concludes with conceptual and methodological suggestions for future research. The information-processing framework provides a useful theoretical lens through which to organize extant and future work in the rapidly growing field of moral judgment. PMID:26579022

  20. Modelling of additive manufacturing processes: a review and classification

    Science.gov (United States)

    Stavropoulos, Panagiotis; Foteinopoulos, Panagis

    2018-03-01

    Additive manufacturing (AM) is a very promising technology; however, there are a number of open issues related to the different AM processes. The literature on modelling the existing AM processes is reviewed and classified. A categorization of the different AM processes in process groups, according to the process mechanism, has been conducted and the most important issues are stated. Suggestions are made as to which approach is more appropriate according to the key performance indicator desired to be modelled and a discussion is included as to the way that future modelling work can better contribute to improving today's AM process understanding.

  1. Application of nonliner reduction techniques in chemical process modeling: a review

    International Nuclear Information System (INIS)

    Muhaimin, Z; Aziz, N.; Abd Shukor, S.R.

    2006-01-01

    Model reduction techniques have been used widely in engineering fields for electrical, mechanical as well as chemical engineering. The basic idea of reduction technique is to replace the original system by an approximating system with much smaller state-space dimension. A reduced order model is more beneficial to process and industrial field in terms of control purposes. This paper is to provide a review on application of nonlinear reduction techniques in chemical processes. The advantages and disadvantages of each technique reviewed are also highlighted

  2. Supplier selection problem: A state-of-the-art review

    Directory of Open Access Journals (Sweden)

    Nilesh R. Ware

    2012-08-01

    Full Text Available In the global competitiveness and growing market environment, “Actual competition is not between firms against firm, than supplier against supplier”. Globally in the fastest market development world gets closer and closer. Consumers prefer fast delivery, economical product, excellent service and high quality product with desired service level. For successful management of this supply chain, supplier considered as the base source for all processes. Therefore, an efficient supplier selection and evaluation process needs to be incorporate. The main purpose of this paper is to provide an extensive state-of-the-art literature review and critique of the studies related to various aspects of supplier selection problem over the past two decades. Research papers appearing in the reputed and leading international journals from 1991 to 2011 are gathered and analyzed. Primary focus is given on more than 200 published and unpublished works. It has been referred extensively to carry out state-of-the-art review for supplier selection problem. Finally, paper provides future perspective based on current research trends available in the published literature.

  3. Medical review practices for driver licensing volume 3: guidelines and processes in the United States.

    Science.gov (United States)

    2017-04-01

    This is the third of three reports examining driver medical review practices in the United States and how : they fulfill the basic functions of identifying, assessing, and rendering licensing decisions on medically or : functionally at-risk drivers. ...

  4. Demystifying the peer-review process - workshop

    Science.gov (United States)

    Scientific writing and peer-review are integral parts of the publishing process. This workshop aims to demystify the peer-review process for early career scientists and provide insightful tips for streamlining the submission and peer review process for all researchers. Providing ...

  5. SRL process hazards review manual

    International Nuclear Information System (INIS)

    1980-08-01

    The principal objective of the Process Hazards Management Program is to provide a regular, systematic review of each process at the Savannah River Laboratory (SRL) to eliminate injuries and to minimize property damage resulting from process hazards of catastrophic potential. Management effort is directed, through the Du Pont Safety Program, toward those controls and practices that ensure this objective. The Process Hazards Management Program provides an additional dimension to further ensure the health and safety of employees and the public. Du Pont has concluded that an organized approach is essential to obtain an effective and efficient process hazards review. The intent of this manual is to provide guidance in creating such an organized approach to performing process hazards reviews on a continuing basis

  6. NASA Product Peer Review Process

    Science.gov (United States)

    Jenks, Ken

    2009-01-01

    This viewgraph presentation describes NASA's product peer review process. The contents include: 1) Inspection/Peer Review at NASA; 2) Reasons for product peer reviews; 3) Different types of peer reviews; and 4) NASA requirements for peer reviews. This presentation also includes a demonstration of an actual product peer review.

  7. State environmental review of a proposed utility independent spent fuel storage installation

    International Nuclear Information System (INIS)

    Sabel, G.; Halstead, R.

    1991-01-01

    This paper describes the environmental review process which was applied by the State of Minnesota to a proposed dry cask storage facility. An environmental analysis of the proposed project is summarized, as are alternatives including other dry storage technologies, increased in-pool storage, transhipment, reprocessing, use of higher burnup fuel and conservation. Public comments and concerns included potential cask failures, health impacts, and the possibility of the site becoming a open-quotes permanentclose quotes storage facility. State intervention in the federal license process is also described

  8. Teacher License Reciprocity. 50-State Review

    Science.gov (United States)

    Aragon, Stephanie

    2017-01-01

    This policy report defines and provides a 50-state review of teacher license reciprocity, explores how state-specific licensing requirements impact the teacher labor market, and includes examples of national and state efforts to facilitate reciprocity.

  9. 43 CFR 429.37 - Does interest accrue on monies owed to the United States during my appeal process?

    Science.gov (United States)

    2010-10-01

    ... United States during my appeal process? 429.37 Section 429.37 Public Lands: Interior Regulations Relating... States during my appeal process? Except for any period in the appeal process during which a stay is then... decision to OHA, or during judicial review of final agency action. ...

  10. Processing and review interface for strong motion data (PRISM) software, version 1.0.0—Methodology and automated processing

    Science.gov (United States)

    Jones, Jeanne; Kalkan, Erol; Stephens, Christopher

    2017-02-23

    A continually increasing number of high-quality digital strong-motion records from stations of the National Strong-Motion Project (NSMP) of the U.S. Geological Survey (USGS), as well as data from regional seismic networks within the United States, call for automated processing of strong-motion records with human review limited to selected significant or flagged records. The NSMP has developed the Processing and Review Interface for Strong Motion data (PRISM) software to meet this need. In combination with the Advanced National Seismic System Quake Monitoring System (AQMS), PRISM automates the processing of strong-motion records. When used without AQMS, PRISM provides batch-processing capabilities. The PRISM version 1.0.0 is platform independent (coded in Java), open source, and does not depend on any closed-source or proprietary software. The software consists of two major components: a record processing engine and a review tool that has a graphical user interface (GUI) to manually review, edit, and process records. To facilitate use by non-NSMP earthquake engineers and scientists, PRISM (both its processing engine and review tool) is easy to install and run as a stand-alone system on common operating systems such as Linux, OS X, and Windows. PRISM was designed to be flexible and extensible in order to accommodate new processing techniques. This report provides a thorough description and examples of the record processing features supported by PRISM. All the computing features of PRISM have been thoroughly tested.

  11. When reviews attack: ethics, free speech, and the peer review process.

    Science.gov (United States)

    Hadjistavropoulos, T; Bieling, P J

    2000-08-01

    The peer review process, whether formally applied in publication and grant review, or informally, such as exchange of ideas in scientific and professional newsgroups, has sparked controversy. Writers in this area agree that scholarly reviews that are inappropriate in tone are not uncommon. Indeed, commentators have suggested rules and guidelines that can be used to improve the review process and to make reviewers more accountable. In this paper, we examine the relevance and impact of ethical codes on the conduct of peer review. It is our contention that the peer review process can be improved, not by a new set of rules but through closer attention to the ethical principles to which we, as psychologists, already subscribe.

  12. Clinical peer review in the United States: history, legal development and subsequent abuse.

    Science.gov (United States)

    Vyas, Dinesh; Hozain, Ahmed E

    2014-06-07

    The Joint Commission on Accreditation requires hospitals to conduct peer review to retain accreditation. Despite the intended purpose of improving quality medical care, the peer review process has suffered several setbacks throughout its tenure. In the 1980s, abuse of peer review for personal economic interest led to a highly publicized multimillion-dollar verdict by the United States Supreme Court against the perpetrating physicians and hospital. The verdict led to decreased physician participation for fear of possible litigation. Believing that peer review was critical to quality medical care, Congress subsequently enacted the Health Care Quality Improvement Act (HCQIA) granting comprehensive legal immunity for peer reviewers to increase participation. While serving its intended goal, HCQIA has also granted peer reviewers significant immunity likely emboldening abuses resulting in Sham Peer Reviews. While legal reform of HCQIA is necessary to reduce sham peer reviews, further measures including the need for standardization of the peer review process alongside external organizational monitoring are critical to improving peer review and reducing the prevalence of sham peer reviews.

  13. State of the art review of degradation processes in LMFBR materials. Volume II. Corrosion behavior

    International Nuclear Information System (INIS)

    Dillon, R.D.

    1975-01-01

    Degradation of materials exposed to Na in LMFBR service is reviewed. The degradation processes are discussed in sections on corrosion and mass transfer, erosion, wear and self welding, sodium--water reactions, and external corrosion. (JRD)

  14. A meta-analysis and review of holistic face processing.

    Science.gov (United States)

    Richler, Jennifer J; Gauthier, Isabel

    2014-09-01

    The concept of holistic processing is a cornerstone of face recognition research, yet central questions related to holistic processing remain unanswered, and debates have thus far failed to reach a resolution despite accumulating empirical evidence. We argue that a considerable source of confusion in this literature stems from a methodological problem. Specifically, 2 measures of holistic processing based on the composite paradigm (complete design and partial design) are used in the literature, but they often lead to qualitatively different results. First, we present a comprehensive review of the work that directly compares the 2 designs, and which clearly favors the complete design over the partial design. Second, we report a meta-analysis of holistic face processing according to both designs and use this as further evidence for one design over the other. The meta-analysis effect size of holistic processing in the complete design is nearly 3 times that of the partial design. Effect sizes were not correlated between measures, consistent with the suggestion that they do not measure the same thing. Our meta-analysis also examines the correlation between conditions in the complete design of the composite task, and suggests that in an individual differences context, little is gained by including a misaligned baseline. Finally, we offer a comprehensive review of the state of knowledge about holistic processing based on evidence gathered from the measure we favor based on the 1st sections of our review-the complete design-and outline outstanding research questions in that new context. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  15. Host state screening process: Regional management plan: [Final report

    International Nuclear Information System (INIS)

    Drobny, N.L.

    1986-01-01

    This report discusses the procedure and cirteria that the Commission selected for designating a host state, should a state not volunteer for this role. Section 2 describes the wide range of approaches considered. Advantages and disadvantages of each are reviewed briefly, and the overall timetable established by the Commission for host state selection is presented. Section 3 describes the selected process for host state designation which involves emphasis on waste quantities generated and transportation factors. Section 4 presents relevant data on characteristics of wastes presently generated and presents estimates for future waste generation to Year 2015. Section 5 presents the results of transportation analyses considering the distance over which waste would be transported and safety (accident) statistics for waste transport routes. Section 6 integrates the conclusions from the analysis of waste volumes generated and transportation factors and suggests how these results might be used to designate a host state. 11 refs., 6 figs., 9 tabs

  16. State-of-the-Art Methods for Brain Tissue Segmentation: A Review.

    Science.gov (United States)

    Dora, Lingraj; Agrawal, Sanjay; Panda, Rutuparna; Abraham, Ajith

    2017-01-01

    Brain tissue segmentation is one of the most sought after research areas in medical image processing. It provides detailed quantitative brain analysis for accurate disease diagnosis, detection, and classification of abnormalities. It plays an essential role in discriminating healthy tissues from lesion tissues. Therefore, accurate disease diagnosis and treatment planning depend merely on the performance of the segmentation method used. In this review, we have studied the recent advances in brain tissue segmentation methods and their state-of-the-art in neuroscience research. The review also highlights the major challenges faced during tissue segmentation of the brain. An effective comparison is made among state-of-the-art brain tissue segmentation methods. Moreover, a study of some of the validation measures to evaluate different segmentation methods is also discussed. The brain tissue segmentation, content in terms of methodologies, and experiments presented in this review are encouraging enough to attract researchers working in this field.

  17. Advances in wastewater nitrogen removal by biological processes: state of the art review

    Directory of Open Access Journals (Sweden)

    Andrea G. Capodaglio

    2016-04-01

    Full Text Available The paper summarizes the state-of-the-art of the most recent advances in biological nitrogen removal, including process design criteria and technological innovations. With reference to the Modified Ludzck Ettinger (MLE process (pre-denitrification and nitrification in the activated sludge process, the most common nitrogen removal process used nowadays, a new design equation for the denitrification reactor based on specific denitrification rate (SDNR has been proposed. In addition, factors influencing SDNR (DO in the anoxic reactor; hydrodynamic behavior are analyzed, and technological solutions are proposed. Concerning technological advances, the paper presents a summary of various “deammonification” processes, better known by their patent names like ANAMMOX®, DEMON®, CANON®, ANITA® and others. These processes have already found applications in the treatment of high-strength wastewater such as digested sludge liquor and landfill leachate. Among other emerging denitrification technologies, consideration is given to the Membrane Biofilm Reactors (MBfRs that can be operated both in oxidation and reduction mode.

  18. The role of physical processes controlling the behaviour of radionuclide contaminants in the aquatic environment: a review of state-of-the-art modelling approaches

    International Nuclear Information System (INIS)

    Monte, Luigi; Perianez, Raul; Boyer, Patrick; Smith, Jim T.; Brittain, John E.

    2009-01-01

    This paper is aimed at presenting and discussing the methodologies implemented in state-of-the-art models for predicting the physical processes of radionuclide migration through the aquatic environment, including transport due to water currents, diffusion, settling and re-suspension. Models are briefly described, model parameter values reviewed and values recommended. The different modelling approaches are briefly classified and the advantages and disadvantages of the various model approaches and methodologies are assessed.

  19. Functional State Modelling of Cultivation Processes: Dissolved Oxygen Limitation State

    Directory of Open Access Journals (Sweden)

    Olympia Roeva

    2015-04-01

    Full Text Available A new functional state, namely dissolved oxygen limitation state for both bacteria Escherichia coli and yeast Saccharomyces cerevisiae fed-batch cultivation processes is presented in this study. Functional state modelling approach is applied to cultivation processes in order to overcome the main disadvantages of using global process model, namely complex model structure and a big number of model parameters. Alongwith the newly introduced dissolved oxygen limitation state, second acetate production state and first acetate production state are recognized during the fed-batch cultivation of E. coli, while mixed oxidative state and first ethanol production state are recognized during the fed-batch cultivation of S. cerevisiae. For all mentioned above functional states both structural and parameter identification is here performed based on experimental data of E. coli and S. cerevisiae fed-batch cultivations.

  20. 42 CFR 457.150 - CMS review of State plan material.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false CMS review of State plan material. 457.150 Section... Introduction; State Plans for Child Health Insurance Programs and Outreach Strategies § 457.150 CMS review of State plan material. (a) Basis for action. CMS reviews each State plan and plan amendment to determine...

  1. 28 CFR 65.41 - Review of State applications.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Review of State applications. 65.41 Section 65.41 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) EMERGENCY FEDERAL LAW ENFORCEMENT.... The Act provides the basis for review and approval or disapproval of state applications. Federal law...

  2. 10 CFR 26.413 - Review process.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Review process. 26.413 Section 26.413 Energy NUCLEAR REGULATORY COMMISSION FITNESS FOR DUTY PROGRAMS FFD Program for Construction § 26.413 Review process. Licensees and other entities who implement an FFD program under this subpart shall establish and implement...

  3. Review of Manganese Processing for Production of TRIP/TWIP Steels, Part 1: Current Practice and Processing Fundamentals

    Science.gov (United States)

    Elliott, R.; Coley, K.; Mostaghel, S.; Barati, M.

    2018-02-01

    The increasing demand for high-performance steel alloys has led to development of transformation-induced plasticity (TRIP) and twinning-induced plasticity (TWIP) alloys over the past three decades. These alloys offer exceptional combinations of high tensile strength and ductility. Thus, the mechanical behavior of these alloys has been a subject of significant work in recent years. However, the challenge of economically providing Mn in the quantity and purity required by these alloys has received considerably less attention. To enable commercial implementation of ultrahigh-Mn alloys, it is desirable to lower the high material costs associated with their production. Therefore, the present work reviews Mn processing routes in the context of the chemical requirements of these alloys. The aim of this review is to assess the current state of the art regarding reduction of manganese ores and provide a comprehensive reference for researchers working to mitigate material processing costs associated with Mn production. The review is presented in two parts: Part 1 introduces TRIP and TWIP alloys, current industrial practice, and pertinent thermodynamic fundamentals; Part 2 addresses available literature regarding reduction of Mn ores and oxides, and seeks to identify opportunities for future process development.

  4. The treaty on the non-proliferation of nuclear weapons and the process for its enhanced review on the eve of the 2000 review conference

    International Nuclear Information System (INIS)

    Pinel, C.

    2000-01-01

    This article sets out the principle and essentials of the process for reviewing the operation of the non-proliferation treaty (NPT). The NPT was opened for signature on 1 July 1968 and came into force on 5 March 1970. In 1995 the NPT was extended. The 2000 review conference is of considerable importance for the future of the nuclear non-proliferation regime, particularly in the light of the fact that after the indefinite and unconditional extension of the treaty, the non-nuclear-weapon states urged the nuclear-weapon states to take new steps towards nuclear disarmament. This article presents a review of the 30 year period of the application of NPT

  5. REVIEW ARTICLE: Spectrophotometric applications of digital signal processing

    Science.gov (United States)

    Morawski, Roman Z.

    2006-09-01

    Spectrophotometry is more and more often the method of choice not only in analysis of (bio)chemical substances, but also in the identification of physical properties of various objects and their classification. The applications of spectrophotometry include such diversified tasks as monitoring of optical telecommunications links, assessment of eating quality of food, forensic classification of papers, biometric identification of individuals, detection of insect infestation of seeds and classification of textiles. In all those applications, large numbers of data, generated by spectrophotometers, are processed by various digital means in order to extract measurement information. The main objective of this paper is to review the state-of-the-art methodology for digital signal processing (DSP) when applied to data provided by spectrophotometric transducers and spectrophotometers. First, a general methodology of DSP applications in spectrophotometry, based on DSP-oriented models of spectrophotometric data, is outlined. Then, the most important classes of DSP methods for processing spectrophotometric data—the methods for DSP-aided calibration of spectrophotometric instrumentation, the methods for the estimation of spectra on the basis of spectrophotometric data, the methods for the estimation of spectrum-related measurands on the basis of spectrophotometric data—are presented. Finally, the methods for preprocessing and postprocessing of spectrophotometric data are overviewed. Throughout the review, the applications of DSP are illustrated with numerous examples related to broadly understood spectrophotometry.

  6. Conducting need-for-power review for nuclear power plants: guidelines to states. Draft report

    International Nuclear Information System (INIS)

    Nash, D.A.

    1982-12-01

    The report is intended to describe the state regulatory commissions and other state agencies the standards and criteria used by NRC in conducting need-for-power evaluations for the licensing of nuclear power plants. These are intended as guidelines to states which may wish to perform a need-for-power review that will suffice for adoption by the NRC in its licensing process. Three methodologies which have been used for need-for-power evaluations and which meet NRC standards are included

  7. ROLLING PROCESS WITH OHSAS AND TEXTURE FORMATION– A REVIEW

    Directory of Open Access Journals (Sweden)

    P. CHANDRAMOHAN

    2009-03-01

    Full Text Available Rolling is a mechanical treatment, which plays an important part in the processing of ferrous and nonferrous alloys. Texturing is an important phenomenon that occurs after rolling process. Preferred orientation increases the strength of the material enormously. Hence the research is focused on the rolling studies and the texture formation, which occurs after rolling process. This review mainly focuses on rolling process carried out in different alloys. It also highlights the analysis made on various rolling parameters for improving the mechanical properties. Texture studies carried on various ferrous and non-ferrous alloys; particularly in nitrogen alloyed duplex stainless steel is discussed. Finally the need for implementation of occupational health and safety during a thermomechanical treatment is also discussed. The state of art in this field is encouraging and showing positive signs of commercializing rolled nitrogen alloyed duplex stainless steel after proper texture control.

  8. Elucidating rhizosphere processes by mass spectrometry – A review

    International Nuclear Information System (INIS)

    Rugova, Ariana; Puschenreiter, Markus; Koellensperger, Gunda; Hann, Stephan

    2017-01-01

    The presented review discusses state-of-the-art mass spectrometric methods, which have been developed and applied for investigation of chemical processes in the soil-root interface, the so-called rhizosphere. Rhizosphere soil's physical and chemical characteristics are to a great extent influenced by a complex mixture of compounds released from plant roots, i.e. root exudates, which have a high impact on nutrient and trace element dynamics in the soil-root interface as well as on microbial activities or soil physico-chemical characteristics. Chemical characterization as well as accurate quantification of the compounds present in the rhizosphere is a major prerequisite for a better understanding of rhizosphere processes and requires the development and application of advanced sampling procedures in combination with highly selective and sensitive analytical techniques. During the last years, targeted and non-targeted mass spectrometry-based methods have emerged and their combination with specific separation methods for various elements and compounds of a wide polarity range have been successfully applied in several studies. With this review we critically discuss the work that has been conducted within the last decade in the context of rhizosphere research and elemental or molecular mass spectrometry emphasizing different separation techniques as GC, LC and CE. Moreover, selected applications such as metal detoxification or nutrient acquisition will be discussed regarding the mass spectrometric techniques applied in studies of root exudates in plant-bacteria interactions. Additionally, a more recent isotope probing technique as novel mass spectrometry based application is highlighted. - Highlights: • State-of-the-art mass spectrometry methods developed and applied in rhizosphere research are reviewed. • Elemental and molecular mass spectrometry emphasizing different separation techniques (GC, LC or CE) are discussed. • Case studies on metal detoxification and

  9. Elucidating rhizosphere processes by mass spectrometry – A review

    Energy Technology Data Exchange (ETDEWEB)

    Rugova, Ariana [Division of Analytical Chemistry, Department of Chemistry, University of Natural Resources and Life Sciences-BOKU, Vienna (Austria); Puschenreiter, Markus [Department of Forest and Soil Sciences, Rhizosphere Ecology and Biogeochemistry Group, University of Natural Resources and Life Sciences-BOKU, Vienna (Austria); Koellensperger, Gunda [Institute of Analytical Chemistry, Faculty of Chemistry, University of Vienna, Vienna (Austria); Hann, Stephan, E-mail: stephan.hann@boku.ac.at [Division of Analytical Chemistry, Department of Chemistry, University of Natural Resources and Life Sciences-BOKU, Vienna (Austria)

    2017-03-01

    The presented review discusses state-of-the-art mass spectrometric methods, which have been developed and applied for investigation of chemical processes in the soil-root interface, the so-called rhizosphere. Rhizosphere soil's physical and chemical characteristics are to a great extent influenced by a complex mixture of compounds released from plant roots, i.e. root exudates, which have a high impact on nutrient and trace element dynamics in the soil-root interface as well as on microbial activities or soil physico-chemical characteristics. Chemical characterization as well as accurate quantification of the compounds present in the rhizosphere is a major prerequisite for a better understanding of rhizosphere processes and requires the development and application of advanced sampling procedures in combination with highly selective and sensitive analytical techniques. During the last years, targeted and non-targeted mass spectrometry-based methods have emerged and their combination with specific separation methods for various elements and compounds of a wide polarity range have been successfully applied in several studies. With this review we critically discuss the work that has been conducted within the last decade in the context of rhizosphere research and elemental or molecular mass spectrometry emphasizing different separation techniques as GC, LC and CE. Moreover, selected applications such as metal detoxification or nutrient acquisition will be discussed regarding the mass spectrometric techniques applied in studies of root exudates in plant-bacteria interactions. Additionally, a more recent isotope probing technique as novel mass spectrometry based application is highlighted. - Highlights: • State-of-the-art mass spectrometry methods developed and applied in rhizosphere research are reviewed. • Elemental and molecular mass spectrometry emphasizing different separation techniques (GC, LC or CE) are discussed. • Case studies on metal detoxification

  10. 40 CFR 131.20 - State review and revision of water quality standards.

    Science.gov (United States)

    2010-07-01

    ... (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS Procedures for Review and Revision of Water Quality Standards § 131.20 State review and revision of water quality standards. (a) State review. The State shall... reviewing applicable water quality standards and, as appropriate, modifying and adopting standards. Any...

  11. Standardization of the licensing process in the United States

    International Nuclear Information System (INIS)

    Villa, R.

    1986-01-01

    The paper discusses a major problem with the design review process for light water reactors. Major confusion exists over the design-basis requirements for a future nuclear power plant in the US. It is not at all clear how the conclusions of a severe accident review are to be integrated into the design approval process. The separation between a design-basis review and a severe accident review makes absolutely no sense if the severe accident review is to have an influence on the design. If an acceptable design is defined during the deterministic review, it is destructive to allow new design-basis requirements to appear during the probabilistic review. Clearly, the review process has too many undefined steps. It is believed that once all of the requirements are defined for a future design, and once the licensing process is exactly defined, the industry can begin a productive and successful standardization program

  12. Understanding the Federal Proposal Review Process.

    Science.gov (United States)

    Cavin, Janis I.

    Information on the peer review process for the evaluation of federal grant proposals is presented to help college grants administrators and faculty develop good proposals. This guidebook provides an overview of the policies and conventions that govern the review and selection of proposals for funding, and details the review procedures of the…

  13. Treatment of winery wastewater by physicochemical, biological and advanced processes: a review.

    Science.gov (United States)

    Ioannou, L A; Li Puma, G; Fatta-Kassinos, D

    2015-04-09

    Winery wastewater is a major waste stream resulting from numerous cleaning operations that occur during the production stages of wine. The resulting effluent contains various organic and inorganic contaminants and its environmental impact is notable, mainly due to its high organic/inorganic load, the large volumes produced and its seasonal variability. Several processes for the treatment of winery wastewater are currently available, but the development of alternative treatment methods is necessary in order to (i) maximize the efficiency and flexibility of the treatment process to meet the discharge requirements for winery effluents, and (ii) decrease both the environmental footprint, as well as the investment/operational costs of the process. This review, presents the state-of-the-art of the processes currently applied and/or tested for the treatment of winery wastewater, which were divided into five categories: i.e., physicochemical, biological, membrane filtration and separation, advanced oxidation processes, and combined biological and advanced oxidation processes. The advantages and disadvantages, as well as the main parameters/factors affecting the efficiency of winery wastewater treatment are discussed. Both bench- and pilot/industrial-scale processes have been considered for this review. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. State Level Review of Doctoral Programs in Texas.

    Science.gov (United States)

    Whittington, Nil

    Review of doctoral degree programs in Texas public colleges and universities is discussed. Attention is directed to review procedures and strengths and weaknesses in the state's doctoral programs in educational psychology, counseling and guidance, and student personnel services. Doctoral programs were reviewed because of their high cost and a…

  15. Review process for license renewal applications

    International Nuclear Information System (INIS)

    Craig, John W.; Kuo, P.T.

    1991-01-01

    In preparation for license renewal reviews, the Nuclear Regulatory Commission has recently published for public review and comment a proposed rule for license renewal and a draft Standard Review Plan as well as a draft Regulatory Guide relating to the implementation of the proposed rule. In support of future license renewal applications, the nuclear industry has also submitted 11 industry reports for NRC review and approval. This paper briefly describe how these parallel regulatory and industry activities will be factored into the NRC review process for license renewal. (author)

  16. The use of tomographic techniques in the mineral processing Industry. A review

    International Nuclear Information System (INIS)

    Witika, L.K.; Jere, E.H.

    2002-01-01

    Process tomographic techniques may be used to analyse the internal state of most of the multiphase process engineering systems such as material segregation in a reactor multiphase flow in pipes and the spatial resolution of mineral grains in multiphase particles. These techniques include radiation computed tomography (X-ray or ray), electrical methods(capacitance, impedance and inductive tomography) positron emission tomography,optical tomography, microwave tomography, acoustic tomographical methods and many more. Many potential applications exist for process tomographic instrumentation for quantitative analysis and fault-detection purposes. Amongst these, electrical methods are widely used for those mineral processes deserving particular attention such as dense-medium separation, hydro cyclones, flotation cells and columns, gas-liquid absorbers, solvent extraction and other liquid-liquid processes, filtration and other solid-liquid processes, grinding mills (both dry and wet, conveyors and hoppers). Development in on-line measurement instrumentation now allow direct observation of the behaviour of fluids inside mineral separation equipment. This offers the possibility to acquire process data to enable models to be devised, to verify theoretical computational fluid dynamics predictions and control of various unit processes. In this review, the most important tomographic sensing methods are reviewed. Examples of the implementation of some electrical methods are illustrated. (authors)

  17. 6 CFR 37.59 - DHS reviews of State compliance.

    Science.gov (United States)

    2010-01-01

    ... either has implemented, or intends to implement, to correct any deficiencies cited in the preliminary... a State reply. (e) State's right to judicial review. Any State aggrieved by an adverse decision...

  18. Radiopharmaceutical drug review process

    International Nuclear Information System (INIS)

    Frankel, R.

    1985-01-01

    To ensure proper radioactive drug use (such as quality, diagnostic improvement, and minimal radioactive exposure), the Food and Drug Administration evaluates new drugs with respect to safety, effectiveness, and accuracy and adequacy of the labeling. The IND or NDA process is used for this purpose. A brief description of the process, including the Chemical Classification System and the therapeutic potential classification, is presented as it applies to radiopharmaceuticals. Also, the status of the IND or NDA review of radiopharmaceuticals is given

  19. Migration processes in SCO member states

    Directory of Open Access Journals (Sweden)

    Valentina Sergeevna Antonyuk

    2012-12-01

    Full Text Available The article concerns modern state and development of migration processes in SCO member states. As a main method of research statistical analysis was applied. The article shows that migration streams between SCO member states are rather intensive, and the problem of labor migration becomes more and more urgent. The countries of consuming and supplying of labour force are clearly differentiated in the region. For some countries, labor export is the key sector of economy. At the same time, interstate relations between SCO member states sometimes are rather disputed. The most urgent factors causing the development of migration processes in the region were determined. Among them, thefactor of growing outflows from China isespecially noted. It is noted that migration processes are discussed by SCO member states nowadays in terms of illegal migration and international criminality connected with it. It means that the question of labor migration is a real problem. It is indicated that the creation of a specific joint commission on migration policy affiliated with the Council of Foreign Ministers of SCO member states is the necessary condition of effective interaction in migration questions within the framework of Shanghai Cooperation Organization.

  20. Guidelines for the review of state ITS/CVO business plans

    Science.gov (United States)

    1997-08-01

    This document provides guidelines for the review of state ITS/CVO business plans by the FHWA. The purpose of the review is to ensure that the state business plans have been developed in a manner consistent with the FHWAs intent in awarding ITS/CVO...

  1. A review: deposition and resuspension processes

    International Nuclear Information System (INIS)

    Sehmel, G.A.

    1979-01-01

    A review chapter was written on deposition and resuspension processes for the forthcoming Department of Energy publication, Atmospheric Sciences and Power Production, edited by D. Randerson. The chapter includes eleven tables and thirteen figures summarizing data from 241 references. The conclusions of that review chapter are given

  2. Context-Aware Recommender System: A Review of Recent Developmental Process and Future Research Direction

    Directory of Open Access Journals (Sweden)

    Khalid Haruna

    2017-12-01

    Full Text Available Intelligent data handling techniques are beneficial for users; to store, process, analyze and access the vast amount of information produced by electronic and automated devices. The leading approach is to use recommender systems (RS to extract relevant information from the vast amount of knowledge. However, early recommender systems emerged without the cognizance to contextualize information regarding users’ recommendations. Considering the historical methodological limitations, Context-Aware Recommender Systems (CARS are now deployed, which leverage contextual information in addition to the classical two-dimensional search processes, providing better-personalized user recommendations. This paper presents a review of recent developmental processes as a fountainhead for the research of a context-aware recommender system. This work contributes by taking an integrated approach to the complete CARS developmental process, unlike other review papers, which only address a specific aspect of the CARS process. First, an in-depth review is presented pertaining to the state-of-the-art and classified literature, considering the domain of the application models, filters, extraction and evaluation approaches. Second, viewpoints are presented relating to the extraction of literature with analysis on the merit and demerit of each, and the evolving processes between them. Finally, the outstanding challenges and opportunities for future research directions are highlighted.

  3. A state of the art review of vitrification of high level waste in Europe

    International Nuclear Information System (INIS)

    Heimerl, W.

    This paper gives a review of the state-of-the-art of the development and demonstration of vitrification processes for high level radioactive waste solutions on an industrial scale in four European countries (France, United Kingdom, Federal Republic of Germany and Belgium). Historical development, experiences and operations present status and future plans are presented. Three of the processes which seem to be of major importance are described (AVM-France, HARVEST-United Kingdom, PAMELA Germany/Belgium). (author)

  4. The United States nuclear regulatory commission license renewal process

    International Nuclear Information System (INIS)

    Holian, B.E.

    2009-01-01

    The United States (U.S.) Nuclear Regulatory Commission (NRC) license renewal process establishes the technical and administrative requirements for the renewal of operating power plant licenses. Reactor ope-rating licenses were originally issued for 40 years and are allowed to be renewed. The review process for license renewal applications (L.R.A.) provides continued assurance that the level of safety provided by an applicant's current licensing basis is maintained for the period of extended operation. The license renewal review focuses on passive, long-lived structures and components of the plant that are subject to the effects of aging. The applicant must demonstrate that programs are in place to manage those aging effects. The review also verifies that analyses based on the current operating term have been evaluated and shown to be valid for the period of extended operation. The NRC has renewed the licenses for 52 reactors at 30 plant sites. Each applicant requested, and was granted, an extension of 20 years. Applications to renew the licenses of 20 additional reactors at 13 plant sites are under review. As license renewal is voluntary, the decision to seek license renewal and the timing of the application is made by the licensee. However, the NRC expects that, over time, essentially all U.S. operating reactors will request license renewal. In 2009, the U.S. has 4 plants that enter their 41. year of ope-ration. The U.S. Nuclear Industry has expressed interest in 'life beyond 60', that is, requesting approval of a second renewal period. U.S. regulations allow for subsequent license renewals. The NRC is working with the U.S. Department of Energy (DOE) on research related to light water reactor sustainability. (author)

  5. Federal/State cooperation in the licensing of a nuclear power project. A joint licensing process between the US Nuclear Regulatory Commission and the Washington State Energy Facility Site Evaluation Council

    International Nuclear Information System (INIS)

    1984-05-01

    This report summarizes and documents a joint environmental review and licensing process established between the US Nuclear Regulatory Commission (NRC) and the Washington State Energy Facility Site Evaluation Council (EFSEC) in 1980-1983 for the Skagit/Hanford Nuclear Project (S/HNP). It documents the agreements made between the agencies to prepare a joint environmental impact statement responsive to the requirements of the National Environmental Policy Act of 1969 (NEPA) and the Washington State Environmental Policy Act. These agreements also established protocol to conduct joint public evidentiary hearings on matters of mutual jurisdiction, thereby reducing the duplication of effort and increasing the efficiency of the use of resources of federal and state governments and other entities involved in the process. This report may provide guidance and rationale to licensing bodies that may wish to adopt some of the procedures discussed in the report in the event that they become involved in the licensing of a nuclear power plant project. The history of the S/HNP and of the agreement processes are discussed. Discussions are provided on implementing the joint review process. A separate section is included which presents independent evaluations of the process by the applicant, NRC, and EFSEC

  6. Using simplified peer review processes to fund research: a prospective study

    Science.gov (United States)

    Herbert, Danielle L; Graves, Nicholas; Clarke, Philip; Barnett, Adrian G

    2015-01-01

    Objective To prospectively test two simplified peer review processes, estimate the agreement between the simplified and official processes, and compare the costs of peer review. Design, participants and setting A prospective parallel study of Project Grant proposals submitted in 2013 to the National Health and Medical Research Council (NHMRC) of Australia. The official funding outcomes were compared with two simplified processes using proposals in Public Health and Basic Science. The two simplified processes were: panels of 7 reviewers who met face-to-face and reviewed only the nine-page research proposal and track record (simplified panel); and 2 reviewers who independently reviewed only the nine-page research proposal (journal panel). The official process used panels of 12 reviewers who met face-to-face and reviewed longer proposals of around 100 pages. We compared the funding outcomes of 72 proposals that were peer reviewed by the simplified and official processes. Main outcome measures Agreement in funding outcomes; costs of peer review based on reviewers’ time and travel costs. Results The agreement between the simplified and official panels (72%, 95% CI 61% to 82%), and the journal and official panels (74%, 62% to 83%), was just below the acceptable threshold of 75%. Using the simplified processes would save $A2.1–$A4.9 million per year in peer review costs. Conclusions Using shorter applications and simpler peer review processes gave reasonable agreement with the more complex official process. Simplified processes save time and money that could be reallocated to actual research. Funding agencies should consider streamlining their application processes. PMID:26137884

  7. Review of state-of-the-art of solar collector corrosion processes. Task 1 of solar collector studies for solar heating and cooling applications. Final technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Clifford, J E; Diegle, R B

    1980-04-11

    The state-of-the-art of solar collector corrosion processes is reviewed, and Task 1 of a current research program on use of aqueous heat transfer fluids for solar heating and cooling is summarized. The review of available published literature has indicated that lack of quantitative information exists relative to collector corrosion at the present time, particularly for the higher temperature applications of solar heating and cooling compared to domestic water heating. Solar collector systems are reviewed from the corrosion/service life viewpoint, with emphasis on various applications, collector design, heat transfer fluids, and freeze protection methods. Available information (mostly qualitative) on collector corrosion technology is reviewed to indicate potential corrosion problem areas and corrosion prevention practices. Sources of limited quantitative data that are reviewed are current solar applications, research programs on collector corrosion, and pertinent experience in related applications of automotive cooling and non-solar heating and cooling. A data bank was developed to catalog corrosion information. Appendix A of this report is a bibliography of the data bank, with abstracts reproduced from presently available literature accessions (about 220). This report is presented as a descriptive summary of information that is contained in the data bank.

  8. 8 CFR 287.10 - Expedited internal review process.

    Science.gov (United States)

    2010-01-01

    ... jurisdiction regarding criminal violations of law. [68 FR 35281, June 13, 2003] ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Expedited internal review process. 287.10... OFFICERS; POWERS AND DUTIES § 287.10 Expedited internal review process. (a) Violations of standards for...

  9. 42 CFR 403.320 - CMS review and monitoring of State systems.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false CMS review and monitoring of State systems. 403.320 Section 403.320 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Systems § 403.320 CMS review and monitoring of State systems. (a) General rule. The State must submit an...

  10. DECOMPOSITION OF MANUFACTURING PROCESSES: A REVIEW

    Directory of Open Access Journals (Sweden)

    N.M.Z.N. Mohamed

    2012-06-01

    Full Text Available Manufacturing is a global activity that started during the industrial revolution in the late 19th century to cater for the large-scale production of products. Since then, manufacturing has changed tremendously through the innovations of technology, processes, materials, communication and transportation. The major challenge facing manufacturing is to produce more products using less material, less energy and less involvement of labour. To face these challenges, manufacturing companies must have a strategy and competitive priority in order for them to compete in a dynamic market. A review of the literature on the decomposition of manufacturing processes outlines three main processes, namely: high volume, medium volume and low volume. The decomposition shows that each sub process has its own characteristics and depends on the nature of the firm’s business. Two extreme processes are continuous line production (fast extreme and project shop (slow extreme. Other processes are in between these two extremes of the manufacturing spectrum. Process flow patterns become less complex with cellular, line and continuous flow compared with jobbing and project. The review also indicates that when the product is high variety and low volume, project or functional production is applied.

  11. Low activity resin processing and disposal options review

    International Nuclear Information System (INIS)

    Gardner, F.

    1996-01-01

    New processing options for low activity resin processing and disposal are available. This presentation reviews the economics and technical requirements associated with the following low activity resin processing options. (1) Bulk release resin. (2) Direct disposal. (3) Decontamination and bulk release of cleaned resin. New processing and disposal options have been developed during 1995. Commercial experience with each of these options will be reviewed and the economics associated with the processing method described in detail. Technical requirements for each option will be identified specifying the activity limits and operational requirements for implementation

  12. Environmental performance reviews: United States

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-01-15

    This book presents OECD assessments and recommendations regarding the United States' effort to manage its environment including air, water nature, and biodiversity to do this in a sustainable manner; and to do this in co-operation with its global neighbours. In particular, it assesses progress made since 1996, when OECD's previous review on the US was done. 40 figs., 21 tabs.

  13. Constellation Mission Operation Working Group: ESMO Maneuver Planning Process Review

    Science.gov (United States)

    Moyer, Eric

    2015-01-01

    The Earth Science Mission Operation (ESMO) Project created an Independent Review Board to review our Conjunction Risk evaluation process and Maneuver Planning Process to identify improvements that safely manages mission conjunction risks, maintains ground track science requirements, and minimizes overall hours expended on High Interest Events (HIE). The Review Board is evaluating the current maneuver process which requires support by multiple groups. In the past year, there have been several changes to the processes although many prior and new concerns exist. This presentation will discuss maneuver process reviews and Board comments, ESMO assessment and path foward, ESMO future plans, recent changes and concerns.

  14. ABERRANT RESTING-STATE BRAIN ACTIVITY IN POSTTRAUMATIC STRESS DISORDER: A META-ANALYSIS AND SYSTEMATIC REVIEW.

    Science.gov (United States)

    Koch, Saskia B J; van Zuiden, Mirjam; Nawijn, Laura; Frijling, Jessie L; Veltman, Dick J; Olff, Miranda

    2016-07-01

    About 10% of trauma-exposed individuals develop PTSD. Although a growing number of studies have investigated resting-state abnormalities in PTSD, inconsistent results suggest a need for a meta-analysis and a systematic review. We conducted a systematic literature search in four online databases using keywords for PTSD, functional neuroimaging, and resting-state. In total, 23 studies matched our eligibility criteria. For the meta-analysis, we included 14 whole-brain resting-state studies, reporting data on 663 participants (298 PTSD patients and 365 controls). We used the activation likelihood estimation approach to identify concurrence of whole-brain hypo- and hyperactivations in PTSD patients during rest. Seed-based studies could not be included in the quantitative meta-analysis. Therefore, a separate qualitative systematic review was conducted on nine seed-based functional connectivity studies. The meta-analysis showed consistent hyperactivity in the ventral anterior cingulate cortex and the parahippocampus/amygdala, but hypoactivity in the (posterior) insula, cerebellar pyramis and middle frontal gyrus in PTSD patients, compared to healthy controls. Partly concordant with these findings, the systematic review on seed-based functional connectivity studies showed enhanced salience network (SN) connectivity, but decreased default mode network (DMN) connectivity in PTSD. Combined, these altered resting-state connectivity and activity patterns could represent neurobiological correlates of increased salience processing and hypervigilance (SN), at the cost of awareness of internal thoughts and autobiographical memory (DMN) in PTSD. However, several discrepancies between findings of the meta-analysis and systematic review were observed, stressing the need for future studies on resting-state abnormalities in PTSD patients. © 2016 Wiley Periodicals, Inc.

  15. Review of NRC Regulatory processes and functions

    International Nuclear Information System (INIS)

    1980-01-01

    The Advisory Committee on Reactor Safeguards (ACRS) has spent much time over many years observing and examining the NRC licensing process. The Committee is, consequently, in a position to comment on the situation, and it believes this review will be helpful to those examining the regulatory process by discussing how it works, where it is weak, and the opportunities for improvement. The Committee's review may also help put current proposals and discussions in perspective

  16. The JSC Engineering Directorate Product Peer Review Process

    Science.gov (United States)

    Jenks, Kenneth C.

    2009-01-01

    The JSC Engineering Directorate has developed a Product Peer Review process in support of NASA policies for project management and systems engineering. The process complies with the requirements of NPR 7120.5, NPR 7123.1 and NPR 7150.2 and follows the guidance in NASA/SP-2007-6105. This presentation will give an overview of the process followed by a brief demonstration of an actual peer review, with audience participation.

  17. Marketing Academics' Perceptions of the Peer Review Process

    Science.gov (United States)

    Bailey, Charles D.; Hair, Joe F.; Hermanson, Dana R.; Crittenden, Victoria L.

    2012-01-01

    Publication in refereed journals is critical to career success for most marketing faculty members, and the peer review process is the gatekeeper for a refereed journal. The study reported here examines marketing academics' perceptions of this peer review process. Based on responses from 653 marketing academics, we find favorable overall…

  18. Hybrid laser arc welding: State-of-art review

    Science.gov (United States)

    Acherjee, Bappa

    2018-02-01

    Hybrid laser arc welding simultaneously utilizes the arc welding and the laser welding, in a common interaction zone. The synergic effects of laser beam and eclectic arc in the same weld pool results in an increase of welding speed and penetration depth along with the enhancement of gap bridging capability and process stability. This paper presents the current status of this hybrid technique in terms of research, developments and applications. Effort is made to present a comprehensive technical know-how about this process through a systematic review of research articles, industrial catalogues, technical notes, etc. In the introductory part of the review, an overview of the hybrid laser arc welding is presented, including operation principle, process requirements, historical developments, benefits and drawbacks of the process. This is followed by a detailed discussion on control parameters those govern the performance of hybrid laser arc welding process. Thereafter, a report of improvements of performance and weld qualities achieved by using hybrid welding process is presented based on review of several research papers. The succeeding sections furnish the examples of industrial applications and the concluding remarks.

  19. The Association of State Rate Review Authority with Health Insurance Premiums.

    Science.gov (United States)

    Ticse, Caroline

    2015-10-01

    Key findings. (1) Adjusted premiums in the individual market in states with prior approval authority combined with loss ratio requirements were lower in 2010-2013 than premiums in states with no rate review authority or file-and-use regulations only. (2) Adjusted premiums declined modestly in prior approval states while premiums increased in states with no rate review authority or with file-and-use regulations only. (3) The findings suggest that states with prior approval authority and loss ratio requirements constrained increases in health insurance premiums.

  20. Medical review practices for driver licensing : Volume 1 : a case study of guidelines and processes in seven U.S. States.

    Science.gov (United States)

    2016-10-01

    This report is the first of three examining driver medical review practices in the United States and how they fulfilled the basic functions of identifying, assessing, and rendering licensing decisions on medically at-risk drivers. The aim was not to ...

  1. Steady-State Process Modelling

    DEFF Research Database (Denmark)

    Cameron, Ian; Gani, Rafiqul

    2011-01-01

    illustrate the “equation oriented” approach as well as the “sequential modular” approach to solving complex flowsheets for steady state applications. The applications include the Williams-Otto plant, the hydrodealkylation (HDA) of toluene, conversion of ethylene to ethanol and a bio-ethanol process....

  2. Is the Quantum State Real? An Extended Review of ψ-ontology Theorems

    Directory of Open Access Journals (Sweden)

    Matthew Saul Leifer

    2014-11-01

    Full Text Available Towards the end of 2011, Pusey, Barrett and Rudolph derived a theorem that aimed to show that the quantum state must be ontic (a state of reality in a broad class of realist approaches to quantum theory. This result attracted a lot of attention and controversy. The aim of this review article is to review the background to the Pusey–Barrett–Rudolph Theorem, to provide a clear presentation of the theorem itself, and to review related work that has appeared since the publication of the Pusey–Barrett–Rudolph paper. In particular, this review: Explains what it means for the quantum state to be ontic or epistemic (a state of knowledge; Reviews arguments for and against an ontic interpretation of the quantum state as they existed prior to the Pusey–Barrett–Rudolph Theorem; Explains why proving the reality of the quantum state is a very strong constraint on realist theories in that it would imply many of the known no-go theorems, such as Bell's Theorem and the need for an exponentially large ontic state space; Provides a comprehensive presentation of the Pusey–Barrett–Rudolph Theorem itself, along with subsequent improvements and criticisms of its assumptions; Reviews two other arguments for the reality of the quantum state: the first due to Hardy and the second due to Colbeck and Renner, and explains why their assumptions are less compelling than those of the Pusey–Barrett–Rudolph Theorem; Reviews subsequent work aimed at ruling out stronger notions of what it means for the quantum state to be epistemic and points out open questions in this area. The overall aim is not only to provide the background needed for the novice in this area to understand the current status, but also to discuss often overlooked subtleties that should be of interest to the experts. Quanta 2014; 3: 67–155.

  3. A scoping review protocol on the roles and tasks of peer reviewers in the manuscript review process in biomedical journals.

    Science.gov (United States)

    Glonti, Ketevan; Cauchi, Daniel; Cobo, Erik; Boutron, Isabelle; Moher, David; Hren, Darko

    2017-10-22

    The primary functions of peer reviewers are poorly defined. Thus far no body of literature has systematically identified the roles and tasks of peer reviewers of biomedical journals. A clear establishment of these can lead to improvements in the peer review process. The purpose of this scoping review is to determine what is known on the roles and tasks of peer reviewers. We will use the methodological framework first proposed by Arksey and O'Malley and subsequently adapted by Levac et al and the Joanna Briggs Institute. The scoping review will include all study designs, as well as editorials, commentaries and grey literature. The following eight electronic databases will be searched (from inception to May 2017): Cochrane Library, Cumulative Index to Nursing and Allied Health Literature, Educational Resources Information Center, EMBASE, MEDLINE, PsycINFO, Scopus and Web of Science. Two reviewers will use inclusion and exclusion criteria based on the 'Population-Concept-Context' framework to independently screen titles and abstracts of articles considered for inclusion. Full-text screening of relevant eligible articles will also be carried out by two reviewers. The search strategy for grey literature will include searching in websites of existing networks, biomedical journal publishers and organisations that offer resources for peer reviewers. In addition we will review journal guidelines to peer reviewers on how to perform the manuscript review. Journals will be selected using the 2016 journal impact factor. We will identify and assess the top five, middle five and lowest-ranking five journals across all medical specialties. This scoping review will undertake a secondary analysis of data already collected and does not require ethical approval. The results will be disseminated through journals and conferences targeting stakeholders involved in peer review in biomedical research. © Article author(s) (or their employer(s) unless otherwise stated in the text of the

  4. Beryllium processing technology review for applications in plasma-facing components

    Energy Technology Data Exchange (ETDEWEB)

    Castro, R.G.; Jacobson, L.A.; Stanek, P.W.

    1993-07-01

    Materials research and development activities for the International Thermonuclear Experimental Reactor (ITER), i.e., the next generation fusion reactor, are investigating beryllium as the first-wall containment material for the reactor. Important in the selection of beryllium is the ability to process, fabricate and repair beryllium first-wall components using existing technologies. Two issues that will need to be addressed during the engineering design activity will be the bonding of beryllium tiles in high-heat-flux areas of the reactor, and the in situ repair of damaged beryllium tiles. The following review summarizes the current technology associated with welding and joining of beryllium to itself and other materials, and the state-of-the-art in plasma-spray technology as an in situ repair technique for damaged beryllium tiles. In addition, a review of the current status of beryllium technology in the former Soviet Union is also included.

  5. Beryllium processing technology review for applications in plasma-facing components

    International Nuclear Information System (INIS)

    Castro, R.G.; Jacobson, L.A.; Stanek, P.W.

    1993-07-01

    Materials research and development activities for the International Thermonuclear Experimental Reactor (ITER), i.e., the next generation fusion reactor, are investigating beryllium as the first-wall containment material for the reactor. Important in the selection of beryllium is the ability to process, fabricate and repair beryllium first-wall components using existing technologies. Two issues that will need to be addressed during the engineering design activity will be the bonding of beryllium tiles in high-heat-flux areas of the reactor, and the in situ repair of damaged beryllium tiles. The following review summarizes the current technology associated with welding and joining of beryllium to itself and other materials, and the state-of-the-art in plasma-spray technology as an in situ repair technique for damaged beryllium tiles. In addition, a review of the current status of beryllium technology in the former Soviet Union is also included

  6. Transition between process models (BPMN and service models (WS-BPEL and other standards: A systematic review

    Directory of Open Access Journals (Sweden)

    Marko Jurišić

    2011-12-01

    Full Text Available BPMN and BPEL have become de facto standards for modeling of business processes and imple-mentation of business processes via Web services. There is a quintessential problem of discrep-ancy between these two approaches as they are applied in different phases of lifecycle and theirfundamental concepts are different — BPMN is a graph based language while BPEL is basicallya block-based programming language. This paper shows basic concepts and gives an overviewof research and ideas which emerged during last two years, presents state of the art and possiblefuture research directions. Systematic literature review was performed and critical review wasgiven regarding the potential of the given solutions.

  7. Review of Biomedical Image Processing

    Directory of Open Access Journals (Sweden)

    Ciaccio Edward J

    2011-11-01

    Full Text Available Abstract This article is a review of the book: 'Biomedical Image Processing', by Thomas M. Deserno, which is published by Springer-Verlag. Salient information that will be useful to decide whether the book is relevant to topics of interest to the reader, and whether it might be suitable as a course textbook, are presented in the review. This includes information about the book details, a summary, the suitability of the text in course and research work, the framework of the book, its specific content, and conclusions.

  8. Agreements process: problems and opportunities for the states

    International Nuclear Information System (INIS)

    Hunter, T.

    1985-01-01

    The Nuclear Waste Policy Act of 1982 (the Act) directs the Secretary of the US Department of Energy (US DOE) to consult and cooperate with the Governor and legislature of each state within which a candidate site for a nuclear waste repository may exist. The Act further directs USDOE to begin negotiations and to seek to enter into a binding written agreement to address specific concerns of any candidate state which requests such an agreement or within which a site has been approved for site characterization. The written agreements are to address at least the eleven topic areas specified in the Act and are to be completed within six months if possible. The author has been a negotiator for the State of Washington in the repository siting agreements process over the past year. The experience of the author has shown that the agreements process as contemplated by the Act bears little resemblance to the institutional interaction process of the state and federal government on matters relating to consideration of the state for a nuclear waste repository. This paper seeks to analyze the agreements process as it has developed in one state, and identify the problems and opportunities in that process so that other states and USDOE may learn from that experience

  9. Classification, processing and application of hydrogels: A review.

    Science.gov (United States)

    Ullah, Faheem; Othman, Muhammad Bisyrul Hafi; Javed, Fatima; Ahmad, Zulkifli; Md Akil, Hazizan

    2015-12-01

    This article aims to review the literature concerning the choice of selectivity for hydrogels based on classification, application and processing. Super porous hydrogels (SPHs) and superabsorbent polymers (SAPs) represent an innovative category of recent generation highlighted as an ideal mould system for the study of solution-dependent phenomena. Hydrogels, also termed as smart and/or hungry networks, are currently subject of considerable scientific research due to their potential in hi-tech applications in the biomedical, pharmaceutical, biotechnology, bioseparation, biosensor, agriculture, oil recovery and cosmetics fields. Smart hydrogels display a significant physiochemical change in response to small changes in the surroundings. However, such changes are reversible; therefore, the hydrogels are capable of returning to its initial state after a reaction as soon as the trigger is removed. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. Continuous downstream processing for high value biological products: A Review.

    Science.gov (United States)

    Zydney, Andrew L

    2016-03-01

    There is growing interest in the possibility of developing truly continuous processes for the large-scale production of high value biological products. Continuous processing has the potential to provide significant reductions in cost and facility size while improving product quality and facilitating the design of flexible multi-product manufacturing facilities. This paper reviews the current state-of-the-art in separations technology suitable for continuous downstream bioprocessing, focusing on unit operations that would be most appropriate for the production of secreted proteins like monoclonal antibodies. This includes cell separation/recycle from the perfusion bioreactor, initial product recovery (capture), product purification (polishing), and formulation. Of particular importance are the available options, and alternatives, for continuous chromatographic separations. Although there are still significant challenges in developing integrated continuous bioprocesses, recent technological advances have provided process developers with a number of attractive options for development of truly continuous bioprocessing operations. © 2015 Wiley Periodicals, Inc.

  11. Experience of the United States in Hosting and Supporting IAEA Peer Review Missions

    International Nuclear Information System (INIS)

    Mamish, N.

    2016-01-01

    The International Atomic Energy Agency (IAEA) provides a number of peer review services to its Member States. The United States has strongly supported these peer reviews since their inception. In 2010, the United States hosted an Integrated Regulatory Review Service (IRRS) mission, with a follow-up mission completed in 2014. The missions provided valuable recommendations and suggestions, identified a number of best practices, and acknowledged the prompt and effective actions taken by the NRC following the Fukushima Daiichi accident. Through hosting an International Physical Protection Advisory Service (IPPAS) mission in 2013, the United States benefited both from the insights provided by the team, as well as the U.S. Government’s gap analyses and preparatory efforts in advance of the mission. The United States strongly supports the IAEA’s Operational Safety Review Team (OSART) program, inviting a peer review mission to a U.S. nuclear power plant every 3 years. Although OSART is an operational, not regulatory, peer review, the NRC provides funding for the mission and gives inspection credit to operators that host them. The United States also contributes significant technical expertise to IAEA peer review missions hosted by other Member States. With the IRRS and IPPAS reaching their 10th and 20th anniversaries respectively, these programs have improved as they have matured. However, it remains critical for Member States to continue to support these programs, and provide feedback to the IAEA Secretariat on their effectiveness and areas where IAEA might enhance them. Doing so will ensure peer reviews remain an effective tool for strengthening nuclear safety and security worldwide. (author)

  12. Internal quality assurance reviews: challenges and processes ...

    African Journals Online (AJOL)

    Internal quality assurance reviews: challenges and processes – Walter Sisulu University\\'s Business, Management Sciences and Law Faculty. ... This article examines some of the challenges and processes followed by six of the departments ...

  13. Some opinions on the review process of research papers destined for publication.

    Science.gov (United States)

    Roohi, Ehsan; Mahian, Omid

    2015-06-01

    The current paper discusses the peer review process in journals that publish research papers purveying new science and understandings (scientific journals). Different aspects of peer review including the selection of reviewers, the review process and the decision policy of editor are discussed in details. Here, the pros and cons of different conventional methods of review processes are mentioned. Finally, a suggestion is presented for the review process of scientific papers.

  14. A Survey Study of Institutional Review Board Thought Processes in the United States and South Korea

    Directory of Open Access Journals (Sweden)

    Si-Kyung Jung

    2012-09-01

    Full Text Available Introduction: In the last several decades, South Korea has rapidly adopted Western customs and practices. Yet, cultural differences between South Korea and the United States exist. The purpose ofthis study was to identify and characterize potential cultural differences in the Korean and US institutional review board (IRB approach to certain topics.Methods: A qualitative analysis of a 9-item survey, describing 4 research study case scenarios, sent to IRB members from the United States and South Korea. The case scenarios involved the followingissues: (1 the need for consent for retrospective chart review when research subjects receive their care after the study is conceived; (2 child assent; (3 individual versus population benefit; and (4 exception from informed consent in emergency resuscitation research. The free-text responses were analyzed and abstracted for recurrent themes.Results: Twenty-three of the 45 survey recipients completed the survey, for an overall response rate of 51%. The themes that emerged were as follows: (1 the importance of parental authority among Korean participants versus the importance of child autonomy and child assent among US participants; (2 the recognition of the rights of a proxy or surrogate who can represent an individual’s values by all participants; and (3 the importance of the community, expressed by the Korean respondents, versus individualism, expressed by US respondents.Conclusion: Whereas US participants appear to emphasize the importance of the individual and the autonomy of a child, the Korean respondents stressed the importance of parental authority andbenefiting the community, above and beyond that of the individual person. However, there was substantial overlap in the themes expressed by respondents from both countries.

  15. Peer Review Quality and Transparency of the Peer-Review Process in Open Access and Subscription Journals.

    Science.gov (United States)

    Wicherts, Jelte M

    2016-01-01

    Recent controversies highlighting substandard peer review in Open Access (OA) and traditional (subscription) journals have increased the need for authors, funders, publishers, and institutions to assure quality of peer-review in academic journals. I propose that transparency of the peer-review process may be seen as an indicator of the quality of peer-review, and develop and validate a tool enabling different stakeholders to assess transparency of the peer-review process. Based on editorial guidelines and best practices, I developed a 14-item tool to rate transparency of the peer-review process on the basis of journals' websites. In Study 1, a random sample of 231 authors of papers in 92 subscription journals in different fields rated transparency of the journals that published their work. Authors' ratings of the transparency were positively associated with quality of the peer-review process but unrelated to journal's impact factors. In Study 2, 20 experts on OA publishing assessed the transparency of established (non-OA) journals, OA journals categorized as being published by potential predatory publishers, and journals from the Directory of Open Access Journals (DOAJ). Results show high reliability across items (α = .91) and sufficient reliability across raters. Ratings differentiated the three types of journals well. In Study 3, academic librarians rated a random sample of 140 DOAJ journals and another 54 journals that had received a hoax paper written by Bohannon to test peer-review quality. Journals with higher transparency ratings were less likely to accept the flawed paper and showed higher impact as measured by the h5 index from Google Scholar. The tool to assess transparency of the peer-review process at academic journals shows promising reliability and validity. The transparency of the peer-review process can be seen as an indicator of peer-review quality allowing the tool to be used to predict academic quality in new journals.

  16. Safety Experts Complete IAEA Nuclear Regulatory Review of the United States

    International Nuclear Information System (INIS)

    2010-01-01

    nuclear regulators. Such missions also help to build mutual confidence between States in the field of nuclear regulation.'' The IRRS team identified several strengths in the U.S. regulatory system, including: The achievement of a mature safety regulation system that meets its clearly defined strategic goals, organizational values, and the NRC's principles of good regulation; A transparent licensing process that accepts input from public citizens and environmental reviews, and ensures that key documents are publicly available; and A high level of human resource development, due to rigorous staff training at all levels and efforts to ensure long-term knowledge management. The IRRS team also made suggestions to improve the overall performance of the U.S. regulatory system. Examples include: The NRC should consider increasing its effort to use IAEA safety standards in its own regulations; The NRC should develop a fully integrated management system that will coordinate a number of programs and processes that are currently not fully integrated; and The NRC should incorporate lessons learned by the practice of other nations using licensee-conducted periodic safety reviews as a way to improve the NRC's assessment process. IAEA Deputy Director General Denis Flory said, ''I have been impressed by the worldwide interest and international participation in the IAEA's IRRS program. I appreciate the U.S. willingness to invite this mission and demonstrate the value of this service for all nations.'' General information about the Integrated Regulatory Review Service (IRRS) and previous missions can be found on the IAEA website. (IAEA)

  17. State-of-the-evidence reviews: advantages and challenges of including grey literature.

    Science.gov (United States)

    Benzies, Karen M; Premji, Shahirose; Hayden, K Alix; Serrett, Karen

    2006-01-01

    Increasingly, health policy decision-makers and professionals are turning to research-based evidence to support decisions about policy and practice. Systematic reviews are useful for gathering, summarizing, and synthesizing published and unpublished research about clearly defined interventions. State-of-the-evidence reviews are broader than traditional systematic reviews and may include not only published and unpublished research, but also published and unpublished non-research literature. Decisions about whether to include this "grey literature" in a review are challenging and lead to many questions about whether the advantages outweigh the challenges. The primary purpose of this article is to describe what constitutes grey literature, and methods to locate it and assess its quality. The secondary purpose is to discuss the core issues to consider when making decisions to include grey literature in a state-of-the-evidence review. A recent state-of-the-evidence review is used as an exemplar to present advantages and challenges related to including grey literature in a review. Despite the challenges, in the exemplar, inclusion of grey literature was useful to validate the results of a research-based literature search. Decisions about whether to include grey literature in a state-of-the-evidence review are complex. A checklist to assist in decision-making was created as a tool to assist the researcher in determining whether it is advantageous to include grey literature in a review.

  18. Markov processes

    CERN Document Server

    Kirkwood, James R

    2015-01-01

    Review of ProbabilityShort HistoryReview of Basic Probability DefinitionsSome Common Probability DistributionsProperties of a Probability DistributionProperties of the Expected ValueExpected Value of a Random Variable with Common DistributionsGenerating FunctionsMoment Generating FunctionsExercisesDiscrete-Time, Finite-State Markov ChainsIntroductionNotationTransition MatricesDirected Graphs: Examples of Markov ChainsRandom Walk with Reflecting BoundariesGambler’s RuinEhrenfest ModelCentral Problem of Markov ChainsCondition to Ensure a Unique Equilibrium StateFinding the Equilibrium StateTransient and Recurrent StatesIndicator FunctionsPerron-Frobenius TheoremAbsorbing Markov ChainsMean First Passage TimeMean Recurrence Time and the Equilibrium StateFundamental Matrix for Regular Markov ChainsDividing a Markov Chain into Equivalence ClassesPeriodic Markov ChainsReducible Markov ChainsSummaryExercisesDiscrete-Time, Infinite-State Markov ChainsRenewal ProcessesDelayed Renewal ProcessesEquilibrium State f...

  19. State of the technology review

    International Nuclear Information System (INIS)

    Spino, J.

    1998-01-01

    This paper presents a review of different behaviours of fuel elements in relation to fission gases. The influence of the fission gas level and its location regarding differential fuel structures is commented. The gas release process at high burnup is described and some topics that need to be further investigated are suggested. (author)

  20. Peer review in design: Understanding the impact of collaboration on the review process and student perception

    Science.gov (United States)

    Mandala, Mahender Arjun

    A cornerstone of design and design education is frequent situated feedback. With increasing class sizes, and shrinking financial and human resources, providing rich feedback to students becomes increasingly difficult. In the field of writing, web-based peer review--the process of utilizing equal status learners within a class to provide feedback to each other on their work using networked computing systems--has been shown to be a reliable and valid source of feedback in addition to improving student learning. Designers communicate in myriad ways, using the many languages of design and combining visual and descriptive information. This complex discourse of design intent makes peer reviews by design students ambiguous and often not helpful to the receivers of this feedback. Furthermore, engaging students in the review process itself is often difficult. Teams can complement individual diversity and may assist novice designers collectively resolve complex task. However, teams often incur production losses and may be impacted by individual biases. In the current work, we look at utilizing a collaborative team of reviewers, working collectively and synchronously, in generating web based peer reviews in a sophomore engineering design class. Students participated in a cross-over design, conducting peer reviews as individuals and collaborative teams in parallel sequences. Raters coded the feedback generated on the basis of their appropriateness and accuracy. Self-report surveys and passive observation of teams conducting reviews captured student opinion on the process, its value, and the contrasting experience they had conducting team and individual reviews. We found team reviews generated better quality feedback in comparison to individual reviews. Furthermore, students preferred conducting reviews in teams, finding the process 'fun' and engaging. We observed several learning benefits of using collaboration in reviewing including improved understanding of the assessment

  1. Negative ion formation processes: A general review

    International Nuclear Information System (INIS)

    Alton, G.D.

    1990-01-01

    The principal negative ion formation processes will be briefly reviewed. Primary emphasis will be placed on the more efficient and universal processes of charge transfer and secondary ion formation through non-thermodynamic surface ionization. 86 refs., 20 figs

  2. Elucidating rhizosphere processes by mass spectrometry - A review.

    Science.gov (United States)

    Rugova, Ariana; Puschenreiter, Markus; Koellensperger, Gunda; Hann, Stephan

    2017-03-01

    The presented review discusses state-of-the-art mass spectrometric methods, which have been developed and applied for investigation of chemical processes in the soil-root interface, the so-called rhizosphere. Rhizosphere soil's physical and chemical characteristics are to a great extent influenced by a complex mixture of compounds released from plant roots, i.e. root exudates, which have a high impact on nutrient and trace element dynamics in the soil-root interface as well as on microbial activities or soil physico-chemical characteristics. Chemical characterization as well as accurate quantification of the compounds present in the rhizosphere is a major prerequisite for a better understanding of rhizosphere processes and requires the development and application of advanced sampling procedures in combination with highly selective and sensitive analytical techniques. During the last years, targeted and non-targeted mass spectrometry-based methods have emerged and their combination with specific separation methods for various elements and compounds of a wide polarity range have been successfully applied in several studies. With this review we critically discuss the work that has been conducted within the last decade in the context of rhizosphere research and elemental or molecular mass spectrometry emphasizing different separation techniques as GC, LC and CE. Moreover, selected applications such as metal detoxification or nutrient acquisition will be discussed regarding the mass spectrometric techniques applied in studies of root exudates in plant-bacteria interactions. Additionally, a more recent isotope probing technique as novel mass spectrometry based application is highlighted. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Features oxidative processes in sturgeons fish (Acipenseridae (review

    Directory of Open Access Journals (Sweden)

    M. Symon

    2016-12-01

    Full Text Available Purpose. To anayze scientific sources on physiological-biochemical pecularities of reducing-oxidizing processes, including peroxide oxidation of lipids and work of the system of antioxidant protection system in sturgeon species (Acipenseridae. The initiation and process of the oxidative stress have been described. The main products of peroxide oxidation of lipids, antioxidants of natural and artificial origin, organs and tissues for the studies of reducing-oxidizing processes have been examined. Findings. The work generalizes the processes of lipid peroxidation. Briefly outlined the main mechanism of action of antioxidant enzymes. Antioxidant defense system plays one of key role in the life of organism due regulating its series of metabolic processes, use of assessing of its state gives an opportunity obtain quantitative information on the progress of these processes. The products of free radical peroxidation (dien conjugates and malonic dialdehyde can also act as a sort of biomarkers of tissue damage, because their content can judge about the intensity of the flow of free radical processes in the various systems in organism. The review contains a description of the peculiarities of the liver and its involvement in lipid metabolism and antioxidant defense system. It is shown the most common antioxidants used in the feeding of sturgeon. Organs and tissues, which should be used for studying the processes of peroxide oxidation of lipids in sturgeon species, have been examined. Practical value. The systematized data regarding peroxide oxidation of lipids, oxidative stress and antioxidant protection system allow finding a balance between these processes. The data on antioxidants, which are used in feeds for sturgeon species, will be useful for sturgeon culturists. The array of the generalized information will be important for scientists who study the pecularities of the processes of peroxide oxidation of lipids and antioxidant protection system in

  4. NonMarkov Ito Processes with 1- state memory

    Science.gov (United States)

    McCauley, Joseph L.

    2010-08-01

    A Markov process, by definition, cannot depend on any previous state other than the last observed state. An Ito process implies the Fokker-Planck and Kolmogorov backward time partial differential eqns. for transition densities, which in turn imply the Chapman-Kolmogorov eqn., but without requiring the Markov condition. We present a class of Ito process superficially resembling Markov processes, but with 1-state memory. In finance, such processes would obey the efficient market hypothesis up through the level of pair correlations. These stochastic processes have been mislabeled in recent literature as 'nonlinear Markov processes'. Inspired by Doob and Feller, who pointed out that the ChapmanKolmogorov eqn. is not restricted to Markov processes, we exhibit a Gaussian Ito transition density with 1-state memory in the drift coefficient that satisfies both of Kolmogorov's partial differential eqns. and also the Chapman-Kolmogorov eqn. In addition, we show that three of the examples from McKean's seminal 1966 paper are also nonMarkov Ito processes. Last, we show that the transition density of the generalized Black-Scholes type partial differential eqn. describes a martingale, and satisfies the ChapmanKolmogorov eqn. This leads to the shortest-known proof that the Green function of the Black-Scholes eqn. with variable diffusion coefficient provides the so-called martingale measure of option pricing.

  5. Examining Marketing Journals' Publication Process and Reviewer Practices

    Science.gov (United States)

    Seiler, Vicky L.; Reisenwitz, Timothy H.; Schibrowsky, John A.

    2011-01-01

    This study examines reviewer practices at 11 marketing journals. The results for the top three journals are compared to eight comparable journals that are typically considered to be non-top-tier journals. The results suggest that the reviewers and the review processes at the top journals differ significantly from those of the non-top-tier…

  6. Sex Hormones and Processing of Facial Expressions of Emotion: A Systematic Literature Review

    Directory of Open Access Journals (Sweden)

    Flávia L. Osório

    2018-04-01

    Full Text Available Background: We systematically reviewed the literature to determine the influence of sex hormones on facial emotion processing (FEP in healthy women at different phases of life.Methods: Searches were performed in PubMed, Web of Science, PsycINFO, LILACS, and SciELO. Twenty-seven articles were included in the review and allocated into five different categories according to their objectives and sample characteristics (menstrual cycle, oral contraceptives, pregnancy/postpartum, testosterone, and progesterone.Results: Despite the limited number of studies in some categories and the existence of inconsistencies in the results of interest, the findings of the review suggest that FEP may be enhanced during the follicular phase. Studies with women taking oral contraceptives showed reduced recognition accuracy and decreased responsiveness of different brain structures during FEP tasks. Studies with pregnant women and women in the postpartum showed that hormonal changes are associated with alterations in FEP and in brain functioning that could indicate the existence of a hypervigilant state in new and future mothers. Exogenous administration of testosterone enhanced the recognition of threatening facial expressions and the activation of brain structures involved in the processing of emotional stimuli.Conclusions: We conclude that sex hormones affect FEP in women, which may have an impact in adaptive processes of the species and in the onset of mood symptoms associated with the premenstrual syndrome.

  7. NRC perspectives on the digital system review process

    International Nuclear Information System (INIS)

    Mauck, J.L.

    1998-01-01

    Since about 1988, the USNRC has been involved in the review of digital retrofits to instrumentation and control (I and C) systems in nuclear power plants. Initially, this involvement was limited but with the advent of the 1990s, NRC involvement has become greater because of increased interest in and application of digital systems as existing analog systems become obsolete. Criteria for the design of such systems to ensure safety has been promulgated over the years and the USNRC has been actively involved both nationally and internationally with this effort. With the publication of the Zion Eagle 21 Safety Evaluation Report in 1992, Generic Letter 95-02 in April 1995 which endorses EPRI guidance document TR-102348 on digital upgrades and the latest revision to Regulatory Guide 1.152 which endorses IEEE 7.4.3.2-1993; a basic digital system review process was established. The NRC supplemented this review process with recently issued inspection procedures for use by NRC inspectors when conducting onsite reviews of digital modifications. In addition, the NRC undertook a major effort to codify the above guidance and the experience gained from digital system reviews of both operating plant modifications and advanced reactor designs, over these years into a revision to Standard Review Plan, (SRP), NUREG-0800, Chapter 7, Instrumentation and Control. This SRP revision was published in June, 1997, and included new SRP sections, branch technical positions and six new regulatory guides endorsing IEEE standards on software quality. The NRC staff believes that a stable digital system review process is now in place. (author)

  8. OECD environmental performance reviews: United States

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-01-15

    This book presents OECD assessments and recommendations regarding the United States' efforts to manage its environment including air, water, nature, and biodiversity; to do this in a sustainable manner; and to do this in co-operation with its global neighbours. In particular, it assesses progress made since 1996, when OECD's previous review on the US was done. 47 figs., 20 tabs.

  9. A review of United States yellow cake precipitation practice

    International Nuclear Information System (INIS)

    Litz, J.E.; Coleman, R.B.

    1980-01-01

    The various process flowsheets used to produce concentrated uranium solutions are reviewed. The choices of flowsheets are affected by ore alkalinity, uranium mineralization, and the impurities solubilized during leaching. The techniques used to precipitate yellow cake from concentrated uranium solutions are reviewed. Consideration is given to precipitation chemistry, reagent requirements, and process equipment and costs for precipitation, dewatering, drying and calcining. (author)

  10. Review, modeling, Heat Integration, and improved schemes of Rectisol®-based processes for CO2 capture

    International Nuclear Information System (INIS)

    Gatti, Manuele; Martelli, Emanuele; Marechal, François; Consonni, Stefano

    2014-01-01

    The paper evaluates the thermodynamic performances and the energy integration of alternative schemes of a methanol absorption based acid gas removal process designed for CO 2 Capture and Storage. More precisely, this work focuses the attention on the Rectisol ® process specifically designed for the selective removal of H 2 S and CO 2 from syngas produced by coal gasification. The study addresses the following issues: (i) perform a review of the Rectisol ® schemes proposed by engineers and researchers with the purpose of determining the best one for CO 2 capture and storage; (ii) calibrate the PC-SAFT equation of state for CH 3 OH–CO 2 –H 2 S–H 2 –CO mixtures at conditions relevant to the Rectisol ® process; (iii) evaluate the thermodynamic performances and optimize the energy integration of a “Reference” scheme derived from those available in the literature; (iv) identify and assess alternative Rectisol ® schemes with optimized performance for CO 2 Capture and Storage and Heat Integration with utilities. On the basis of the analysis of the Composite Curves of the integrated process, we propose some possible improvements at the level of the process configuration, like the introduction of mechanical vapor recompression and the development of a two stage regeneration arrangement. - Highlights: • Comprehensive review of the Rectisol ® process configurations and applications. • Calibration of PC-SAFT equation of state for Rectisol ® -relevant mixtures. • Detailed process simulation and optimized Heat Integration, and utility design. • Development of alternative Rectisol ® schemes optimized for CO 2 Capture

  11. A code inspection process for security reviews

    Science.gov (United States)

    Garzoglio, Gabriele

    2010-04-01

    In recent years, it has become more and more evident that software threat communities are taking an increasing interest in Grid infrastructures. To mitigate the security risk associated with the increased numbers of attacks, the Grid software development community needs to scale up effort to reduce software vulnerabilities. This can be achieved by introducing security review processes as a standard project management practice. The Grid Facilities Department of the Fermilab Computing Division has developed a code inspection process, tailored to reviewing security properties of software. The goal of the process is to identify technical risks associated with an application and their impact. This is achieved by focusing on the business needs of the application (what it does and protects), on understanding threats and exploit communities (what an exploiter gains), and on uncovering potential vulnerabilities (what defects can be exploited). The desired outcome of the process is an improvement of the quality of the software artifact and an enhanced understanding of possible mitigation strategies for residual risks. This paper describes the inspection process and lessons learned on applying it to Grid middleware.

  12. A code inspection process for security reviews

    International Nuclear Information System (INIS)

    Garzoglio, Gabriele

    2010-01-01

    In recent years, it has become more and more evident that software threat communities are taking an increasing interest in Grid infrastructures. To mitigate the security risk associated with the increased numbers of attacks, the Grid software development community needs to scale up effort to reduce software vulnerabilities. This can be achieved by introducing security review processes as a standard project management practice. The Grid Facilities Department of the Fermilab Computing Division has developed a code inspection process, tailored to reviewing security properties of software. The goal of the process is to identify technical risks associated with an application and their impact. This is achieved by focusing on the business needs of the application (what it does and protects), on understanding threats and exploit communities (what an exploiter gains), and on uncovering potential vulnerabilities (what defects can be exploited). The desired outcome of the process is an improvement of the quality of the software artifact and an enhanced understanding of possible mitigation strategies for residual risks. This paper describes the inspection process and lessons learned on applying it to Grid middleware.

  13. A code inspection process for security reviews

    Energy Technology Data Exchange (ETDEWEB)

    Garzoglio, Gabriele; /Fermilab

    2009-05-01

    In recent years, it has become more and more evident that software threat communities are taking an increasing interest in Grid infrastructures. To mitigate the security risk associated with the increased numbers of attacks, the Grid software development community needs to scale up effort to reduce software vulnerabilities. This can be achieved by introducing security review processes as a standard project management practice. The Grid Facilities Department of the Fermilab Computing Division has developed a code inspection process, tailored to reviewing security properties of software. The goal of the process is to identify technical risks associated with an application and their impact. This is achieved by focusing on the business needs of the application (what it does and protects), on understanding threats and exploit communities (what an exploiter gains), and on uncovering potential vulnerabilities (what defects can be exploited). The desired outcome of the process is an improvement of the quality of the software artifact and an enhanced understanding of possible mitigation strategies for residual risks. This paper describes the inspection process and lessons learned on applying it to Grid middleware.

  14. Promoting healthy food consumption: a review of state-level policies to improve access to fruits and vegetables.

    Science.gov (United States)

    Hood, Carlyn; Martinez-Donate, Ana; Meinen, Amy

    2012-12-01

    Research indicates poor nutrition is a leading determinant of the development of chronic disease, and increasing fruit and vegetable consumption is one method for decreasing obesity. Many policies have focused on increasing the demand for fruits and vegetables through price reductions and coupons. However, without ensuring a stable supply, increased demand can continue to raise prices, crowding out individuals who may otherwise have purchased fruits and vegetables and ultimately leading to continued disparities in access. This paper presents a review of selected state-level policy options recently proposed or implemented in states across the United States, and provides an evidence-based lens through which food access policy can be shaped in the Midwest. This review and potential framework uses Wisconsin to illustrate the feasibility of different state-level decisions and their potential impact on particular populations. Future supply-side policies to consider include expanding Electronic Benefit Transfer to the Special Supplemental Nutrition Program for Women, Infants and Children (WIC),program and farmers markets, incentivizing the purchase of locally grown produce, assisting local specialty farmers directly, and/or establishing a state-level food policy council. This review reveals that a food policy council would create a more sustainable policy analysis process to better ensure future policy adoption is truly comprehensive, encompassing the production, distribution and purchase of locally grown fruits and vegetables.

  15. A literature review of coupled thermal-hydrologic-mechanical-chemical processes pertinent to the proposed high-level nuclear waste repository at Yucca Mountain

    International Nuclear Information System (INIS)

    Manteufel, R.D.; Ahola, M.P.; Turner, D.R.; Chowdhury, A.H.

    1993-07-01

    A literature review has been conducted to determine the state of knowledge available in the modeling of coupled thermal (T), hydrologic (H), mechanical (M), and chemical (C) processes relevant to the design and/or performance of the proposed high-level waste (HLW) repository at Yucca Mountain, Nevada. The review focuses on identifying coupling mechanisms between individual processes and assessing their importance (i.e., if the coupling is either important, potentially important, or negligible). The significance of considering THMC-coupled processes lies in whether or not the processes impact the design and/or performance objectives of the repository. A review, such as reported here, is useful in identifying which coupled effects will be important, hence which coupled effects will need to be investigated by the US Nuclear Regulatory Commission in order to assess the assumptions, data, analyses, and conclusions in the design and performance assessment of a geologic reposit''. Although this work stems from regulatory interest in the design of the geologic repository, it should be emphasized that the repository design implicitly considers all of the repository performance objectives, including those associated with the time after permanent closure. The scope of this review is considered beyond previous assessments in that it attempts with the current state-of-knowledge) to determine which couplings are important, and identify which computer codes are currently available to model coupled processes

  16. A literature review of coupled thermal-hydrologic-mechanical-chemical processes pertinent to the proposed high-level nuclear waste repository at Yucca Mountain

    Energy Technology Data Exchange (ETDEWEB)

    Manteufel, R.D.; Ahola, M.P.; Turner, D.R.; Chowdhury, A.H. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

    1993-07-01

    A literature review has been conducted to determine the state of knowledge available in the modeling of coupled thermal (T), hydrologic (H), mechanical (M), and chemical (C) processes relevant to the design and/or performance of the proposed high-level waste (HLW) repository at Yucca Mountain, Nevada. The review focuses on identifying coupling mechanisms between individual processes and assessing their importance (i.e., if the coupling is either important, potentially important, or negligible). The significance of considering THMC-coupled processes lies in whether or not the processes impact the design and/or performance objectives of the repository. A review, such as reported here, is useful in identifying which coupled effects will be important, hence which coupled effects will need to be investigated by the US Nuclear Regulatory Commission in order to assess the assumptions, data, analyses, and conclusions in the design and performance assessment of a geologic reposit``. Although this work stems from regulatory interest in the design of the geologic repository, it should be emphasized that the repository design implicitly considers all of the repository performance objectives, including those associated with the time after permanent closure. The scope of this review is considered beyond previous assessments in that it attempts with the current state-of-knowledge) to determine which couplings are important, and identify which computer codes are currently available to model coupled processes.

  17. Minimized state complexity of quantum-encoded cryptic processes

    Science.gov (United States)

    Riechers, Paul M.; Mahoney, John R.; Aghamohammadi, Cina; Crutchfield, James P.

    2016-05-01

    The predictive information required for proper trajectory sampling of a stochastic process can be more efficiently transmitted via a quantum channel than a classical one. This recent discovery allows quantum information processing to drastically reduce the memory necessary to simulate complex classical stochastic processes. It also points to a new perspective on the intrinsic complexity that nature must employ in generating the processes we observe. The quantum advantage increases with codeword length: the length of process sequences used in constructing the quantum communication scheme. In analogy with the classical complexity measure, statistical complexity, we use this reduced communication cost as an entropic measure of state complexity in the quantum representation. Previously difficult to compute, the quantum advantage is expressed here in closed form using spectral decomposition. This allows for efficient numerical computation of the quantum-reduced state complexity at all encoding lengths, including infinite. Additionally, it makes clear how finite-codeword reduction in state complexity is controlled by the classical process's cryptic order, and it allows asymptotic analysis of infinite-cryptic-order processes.

  18. PROSPER guidelines: Guidelines for peer review and for plant self-assessment of operational experience feedback process

    International Nuclear Information System (INIS)

    2003-01-01

    Effective use of operational performance information is an important element in any plant operator's arrangements for enhancing the operational safety of a nuclear power plant (NPP). This has been recognized in the IAEA Safety Fundamental, The Safety of Nuclear Installations (Safety Series No. 110). Under the technical aspects of safety, one of the principles of operation and maintenance is that the operating organization and the regulatory body shall establish complementary programmes to analyse operating experience to ensure that lessons are learned and acted upon. Such experience shall be shared with relevant national and international bodies. The Convention on Nuclear Safety, which entered into force in July 1996, also recognized the importance of operational experience feedback as a tool of high importance for the safety of nuclear plant operation and its further enhancement. It follows that the arrangements and results achieved under the operation experience feedback process in Member States will be covered by the national report under the Convention and will be subject to periodical review. These principles are further expanded in the IAEA Safety Standards Safety of Nuclear Power Plants: Operation (Safety Standard Series No. NS-R-2, year 2000) under the Feedback of The IAEA-led Peer Review of the effectiveness of the Operational Safety Performance Experience Review process (PROSPER) and associated guidelines have been developed to provide advice and assistance to utilities or individual power plants to strengthen and enhance the effectiveness of operational experience programmes in achieving these fundamental objectives. The objectives of the former IAEA Assessment of Significant Safety Events Team (ASSET) service have been expanded to include an evaluation of the effective use of all operating performance information available to the plant (e.g. external operating experience, internal low-level and near miss event reports and other relevant operating

  19. Tunneling processes into localized subgap states in superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Ruby, Michael; Heinrich, Benjamin W.; Franke, Katharina J. [Freie Universitaet Berlin, Arnimallee 14, 14195 Berlin (Germany); Pientka, Falko; Peng, Yang; Oppen, Felix von [Freie Universitaet Berlin, Arnimallee 14, 14195 Berlin (Germany); Dahlem Center for Complex Quantum Systems, Freie Universitaet Berlin, 14195 Berlin (Germany)

    2016-07-01

    The Yu-Shiba-Rusinov states bound by magnetic impurities in conventional s-wave superconductors are a simple model system for probing the competition between superconducting and magnetic correlations. Shiba states can be observed in scanning tunneling spectroscopy (STS) as a pair of resonances at positive and negative bias voltages in the superconducting gap. These resonances have been interpreted in terms of single-electron tunneling into the localized sub-gap states. This requires relaxation mechanisms that depopulate the state after an initial tunneling event. Recently, theory suggests that the current can also be carried by Andreev processes which resonantly transfer a Cooper pair into the superconductor. We performed high-resolution STS experiments on single adatom Shiba states on the superconductor Pb, and provide evidence for the existence of two transport regimes. The single-electron processes dominate at large tip-sample distances and small tunneling currents, whereas Andreev processes become important at stronger tunneling. Our conclusions are based on a careful comparison of experiment and theory.

  20. Institutional Review Boards: Perspectives from the United States

    Directory of Open Access Journals (Sweden)

    Alvita Nathaniel, Ph.D., FNP-BC, FAANP

    2010-12-01

    Full Text Available In the U.S., all research must be approved by an Institutional Review Board (IRB that evaluates research protocols for the purpose of protecting human subjects. This paper includes a brief history of the development of public policy that guides institutional review boards in the U.S. and commentary on the responsibilities of a grounded theory researcher interested in applying for approval for a research study.An institutional review board (IRB is a formally constituted committee that approves and monitors biomedical and behavioural research with the purpose of protecting the rights and welfare of research participants. An IRB performs scientific, ethical, and regulatory oversight functions. In the U.S., it is common for grounded theorists to experience frustration with the IRB protocol submission process. Facets of the application process may seem rigid, redundant, and non-applicable. Review board members may not seem to understand or appreciate qualitative methods and delays are common. In addition, a conglomeration of disparate policies and procedures coupled with a variety of types of review boards creates a system that defies description. Nevertheless, a researcher who understands public policy and the responsibilities of institutional review boards can learn to develop research applications that are quickly approved.

  1. Review of site recommendation process in Draft Environmental Assessments

    International Nuclear Information System (INIS)

    Joy, H.; Longo, T.; Burton, E.S.

    1985-01-01

    In December 1984, the US Department of Energy (DOE) published Draft Environmental Assessments (EAs) on nine potentially acceptable nuclear waste repository sites. Five sites in the states of Mississippi, Nevada, Texas, Utah, and Washington were proposed in the Draft EAs for nomination under the Nuclear Waste Policy Act as suitable for further detailed study (site characterization). The Nevada, Texas, and Washington sites were further proposed for recommendation to the President as preferred for site characterization. This paper reviews the process that DOE used in selecting the three sites proposed for site characterization. The process is consistent with DOE's implementation guidelines for selecting repository sites, and proceeds in three steps. First, the sites are ranked in order of preference for each of twenty technical guidelines based on information in the Draft EAs. The second step combines the individual guideline rankings into postclosure and preclosure guideline group rankings, and, finally, into an overall ranking. In the third step, the sensitivity of the choice of the three preferred sites is examined for a range of guideline weightings

  2. Information processing speed in obstructive sleep apnea syndrome: a review.

    Science.gov (United States)

    Kilpinen, R; Saunamäki, T; Jehkonen, M

    2014-04-01

    To provide a comprehensive review of studies on information processing speed in patients with obstructive sleep apnea syndrome (OSAS) as compared to healthy controls and normative data, and to determine whether continuous positive airway pressure (CPAP) treatment improves information processing speed. A systematic review was performed on studies drawn from Medline and PsycINFO (January 1990-December 2011) and identified from lists of references in these studies. After inclusion criteria, 159 articles were left for abstract review, and after exclusion criteria 44 articles were fully reviewed. The number of patients in the studies reviewed ranged from 10 to 157 and the study samples consisted mainly of men. Half of the studies reported that patients with OSAS showed reduced information processing speed when compared to healthy controls. Reduced information processing speed was seen more often (75%) when compared to norm-referenced data. Psychomotor speed seemed to be particularly liable to change. CPAP treatment improved processing speed, but the improvement was marginal when compared to placebo or conservative treatment. Patients with OSAS are affected by reduced information processing speed, which may persist despite CPAP treatment. Information processing is usually assessed as part of other cognitive functioning, not as a cognitive domain per se. However, it is important to take account of information processing speed when assessing other aspects of cognitive functioning. This will make it possible to determine whether cognitive decline in patients with OSAS is based on lower-level or higher-level cognitive processes or both. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  3. Improving the reviewing process in Ecology and Evolutionary Biology

    Directory of Open Access Journals (Sweden)

    Grossman, G. D.

    2014-06-01

    Full Text Available I discuss current issues in reviewing and editorial practices in ecology and evolutionary biology and suggest possible solutions for current problems. The reviewing crisis is unlikely to change unless steps are taken by journals to provide greater inclusiveness and incentives to reviewers. In addition, both journals and institutions should reduce their emphasis on publication numbers (least publishable units and impact factors and focus instead on article synthesis and quality which will require longer publications. Academic and research institutions should consider reviewing manuscripts and editorial positions an important part of a researcher’s professional activities and reward them accordingly. Rewarding reviewers either monetarily or via other incentives such as free journal subscriptions may encourage participation in the reviewing process for both profit and non–profit journals. Reviewer performance will likely be improved by measures that increase inclusiveness, such as sending reviews and decision letters to reviewers. Journals may be able to evaluate the efficacy of their reviewing process by comparing citations of rejected but subsequently published papers with those published within the journal at similar times. Finally, constructive reviews: 1 identify important shortcomings and suggest solutions when possible, 2 distinguish trivial from non–trivial problems, and 3 include editor’s evaluations of the reviews including identification of trivial versus substantive comments (i.e., those that must be addressed.

  4. 28 CFR 91.58 - Timing of the environmental review process.

    Science.gov (United States)

    2010-07-01

    ... CORRECTIONAL FACILITIES Environmental Impact Review Procedures for VOI/TIS Grant Program Environmental Review... anticipated environmental impacts, an environmental impact statement should be initiated. (c) Design phase... projects under construction, OJP will work with the States to determine what environmental analysis has...

  5. Disorder effects in topological states: Brief review of the recent developments

    International Nuclear Information System (INIS)

    Wu Binglan; Zhou Jiaojiao; Jiang Hua; Song Juntao

    2016-01-01

    Disorder inevitably exists in realistic samples, manifesting itself in various exotic properties for the topological states. In this paper, we summarize and briefly review the work completed over the last few years, including our own, regarding recent developments in several topics about disorder effects in topological states. For weak disorder, the robustness of topological states is demonstrated, especially for both quantum spin Hall states with Z 2 = 1 and size induced nontrivial topological insulators with Z 2 = 0. For moderate disorder, by increasing the randomness of both the impurity distribution and the impurity induced potential, the topological insulator states can be created from normal metallic or insulating states. These phenomena and their mechanisms are summarized. For strong disorder, the disorder causes a metal–insulator transition. Due to their topological nature, the phase diagrams are much richer in topological state systems. Finally, the trends in these areas of disorder research are discussed. (topical review)

  6. Asymptotic behaviour near extinction of continuous-state branching processes

    OpenAIRE

    Berzunza, Gabriel; Pardo, Juan Carlos

    2016-01-01

    In this note, we study the asymptotic behaviour near extinction of (sub-) critical continuous state branching processes. In particular, we establish an analogue of Khintchin's law of the iterated logarithm near extinction time for a continuous state branching process whose branching mechanism satisfies a given condition and its reflected process at its infimum.

  7. Financial security of the state in terms of globalization processes escalation

    Directory of Open Access Journals (Sweden)

    Svitlana Tkalenko

    2013-02-01

    Full Text Available The article provides review of the globalization and global integration processes impact on the financial sector formation characterized by an increase in financial flows with the lead role played by transnational corporations and transnational banks. The globalization study has been already reflected by numerous scientific publications and various issues of reputable international academic journals describing the process as irreversible and objective along with demonstrating globalization merits and demerits, etc. In the 21st century, globalization is an issue discussed by everyone: ranging from presidents, prime ministers and members of parliament supposed to solve problems of any scale taking into consideration the global development phenomenon, to ordinary citizens. Today, globalization has obviously become a major trend of the modern world development, which is why issues implying sound development assurance become pressing for each country. The article dwells upon the main component of economic security — the financial one (Ukraine case study. Thus, we are engaged in studying the global development trend in terms of assuring security of the state under conditions of financial flows globalization and existence of global integration processes.

  8. The effects of an editor serving as one of the reviewers during the peer-review process.

    Science.gov (United States)

    Giordan, Marco; Csikasz-Nagy, Attila; Collings, Andrew M; Vaggi, Federico

    2016-01-01

    Background Publishing in scientific journals is one of the most important ways in which scientists disseminate research to their peers and to the wider public. Pre-publication peer review underpins this process, but peer review is subject to various criticisms and is under pressure from growth in the number of scientific publications. Methods Here we examine an element of the editorial process at eLife , in which the Reviewing Editor usually serves as one of the referees, to see what effect this has on decision times, decision type, and the number of citations. We analysed a dataset of 8,905 research submissions to eLife since June 2012, of which 2,747 were sent for peer review. This subset of 2747 papers was then analysed in detail.   Results The Reviewing Editor serving as one of the peer reviewers results in faster decision times on average, with the time to final decision ten days faster for accepted submissions (n=1,405) and five days faster for papers that were rejected after peer review (n=1,099). Moreover, editors acting as reviewers had no effect on whether submissions were accepted or rejected, and a very small (but significant) effect on citation rates. Conclusions An important aspect of eLife 's peer-review process is shown to be effective, given that decision times are faster when the Reviewing Editor serves as a reviewer. Other journals hoping to improve decision times could consider adopting a similar approach.

  9. On the peer review process and its implications for future PRAs

    International Nuclear Information System (INIS)

    Kastenberg, W.E.

    1989-01-01

    A Probabilistic Risk Assessment (PRA) is an effort to quantify nuclear power plant safety in terms of the frequency and consequences of severe accidents. Even though risk analysis can be considered a mature field, the results of recent PRA's are not as robust as they should be because of uncertainty. Some of the major contributors to the uncertainty regarding our current state of knowledge with respect to PRA are: System behavior is subjected to human intervention (and behavior) which is difficult to quantify. Phenomena encountered during severe accidents are difficult to model because they involve multi-component, multi-phase physico-chemical effects in ill-defined geometries. System behavior due to severe external events (e.g., earthquakes, fires) is difficult to model and quantify. Various aspects of plant design and operation are omitted from consideration such as design errors, plant aging and partial operation of engineered safety features. NUREG-1150, have been subject to peer review. The objective of this paper is to discuss the Peer Review of the Draft Reactor Risk Reference Document, and its implications of the future. We begin with a discussion of the objectives of a peer review, peer review committees, and the comments of a peer review committee. We then discuss a major aspect of the NUREG-1150 Peer Review dealing with uncertainty and expert opinion. Given these discussions, some implications for future PRA's will be presented. The goal is to initiate dialogue so that the PRA process as well as its bottom line results achieve credibility in the technical community

  10. The Peer Review Process: An Expanded Role for Repositories

    Directory of Open Access Journals (Sweden)

    Joanna Richardson

    2014-02-01

    Full Text Available Peer review has been regarded as a cornerstone of scientific research for a considerable time. Journals seeking to attract high quality scholarship rely on peer review to maintain their credentials in the publishing industry. However, over a period of time—and especially given the advent of the Internet—complaints have arisen from authors, reviewers and even editors as to the efficacy of the system. The authors outline a range of models which have evolved that either complement or replace evaluation processes which characterise traditional peer review. Research data is presented in the context of quality assessment. The authors introduce several approaches which are utilising repositories to support the process. Consideration is given as to how this might change the current institutional repository environment.

  11. Remote mixed oxide fabrication facility development. Volume 2. State-of-the-art review of remote maintenance system technology

    International Nuclear Information System (INIS)

    Horgos, R.M.; Masch, M.L.

    1979-06-01

    This report provides a state-of-the-art review of remote systems technology, which includes manipulators, process connectors, vision systems and specialized process systems. A proposed mixed oxide fuel fabrication facility was reviewed and evaluated for identification of major remote maintenance and repair tasks. The technological areas were evaluated on the basis of their suitability or applicability for remote maintenance and repair of a proposed fully remote operating mixed oxide fuel fabrication facility. A technological base exists from which the design criteria for a reliable, remote operating facility can be established. Commercially available systems and components, along with those remote technologies now in development, will require modifications to adapt them to specific plant designs and requirements

  12. 40 CFR 70.8 - Permit review by EPA and affected States.

    Science.gov (United States)

    2010-07-01

    ... compatible with EPA's national database management system. (2) The Administrator may waive the requirements... PROGRAMS (CONTINUED) STATE OPERATING PERMIT PROGRAMS § 70.8 Permit review by EPA and affected States. (a...

  13. Cross-disciplinary links in environmental systems science: Current state and claimed needs identified in a meta-review of process models.

    Science.gov (United States)

    Ayllón, Daniel; Grimm, Volker; Attinger, Sabine; Hauhs, Michael; Simmer, Clemens; Vereecken, Harry; Lischeid, Gunnar

    2018-05-01

    Terrestrial environmental systems are characterised by numerous feedback links between their different compartments. However, scientific research is organized into disciplines that focus on processes within the respective compartments rather than on interdisciplinary links. Major feedback mechanisms between compartments might therefore have been systematically overlooked so far. Without identifying these gaps, initiatives on future comprehensive environmental monitoring schemes and experimental platforms might fail. We performed a comprehensive overview of feedbacks between compartments currently represented in environmental sciences and explores to what degree missing links have already been acknowledged in the literature. We focused on process models as they can be regarded as repositories of scientific knowledge that compile findings of numerous single studies. In total, 118 simulation models from 23 model types were analysed. Missing processes linking different environmental compartments were identified based on a meta-review of 346 published reviews, model intercomparison studies, and model descriptions. Eight disciplines of environmental sciences were considered and 396 linking processes were identified and ascribed to the physical, chemical or biological domain. There were significant differences between model types and scientific disciplines regarding implemented interdisciplinary links. The most wide-spread interdisciplinary links were between physical processes in meteorology, hydrology and soil science that drive or set the boundary conditions for other processes (e.g., ecological processes). In contrast, most chemical and biological processes were restricted to links within the same compartment. Integration of multiple environmental compartments and interdisciplinary knowledge was scarce in most model types. There was a strong bias of suggested future research foci and model extensions towards reinforcing existing interdisciplinary knowledge rather than

  14. Electron beam flue gas treatment process. Review

    International Nuclear Information System (INIS)

    Honkonen, V.A.

    1996-01-01

    The basis of the process for electron beam flue gas treatment are presented in the report. In tabular form the history of the research is reviewed. Main dependences of SO 2 and NO x removal efficiencies on different physico-chemical parameters are discussed. Trends concerning industrial process implementation are presented in the paper,finally. (author). 74 refs, 11 figs, 1 tab

  15. Final-state interaction in processes of deuteron breaking

    International Nuclear Information System (INIS)

    Thome Filho, Z.D.

    1974-12-01

    Interaction between particles in the final state of reactions can strongly affect the experimental angular distributions, as in the scattering processes with the breaking of the deuteron target, where the final state interaction is responsible for the disappearance of the differential cross section in the front direction. It is then necessary to include the contribution of the final state interaction to small angles of incoherent processes particle-deuteron. In this work line, an analysis is made of the process πd → πpn for different values of the incident energy. The data obtained are compared with existing experimental data. The hypothesis is also considered of the nucleon which collides with the incident particle being outside the mass layer. An analytical extension of the resonant amplitude πN outwards the mass layer is also used

  16. Process modeling and bottleneck mining in online peer-review systems.

    Science.gov (United States)

    Premchaiswadi, Wichian; Porouhan, Parham

    2015-01-01

    This paper is divided into three main parts. In the first part of the study, we captured, collected and formatted an event log describing the handling of reviews for proceedings of an international conference in Thailand. In the second part, we used several process mining techniques in order to discover process models, social, organizational, and hierarchical structures from the proceeding's event log. In the third part, we detected the deviations and bottlenecks of the peer review process by comparing the observed events (i.e., authentic dataset) with a pre-defined model (i.e., master map). Finally, we investigated the performance information as well as the total waiting time in order to improve the effectiveness and efficiency of the online submission and peer review system for the prospective conferences and seminars. Consequently, the main goals of the study were as follows: (1) to convert the collected event log into the appropriate format supported by process mining analysis tools, (2) to discover process models and to construct social networks based on the collected event log, and (3) to find deviations, discrepancies and bottlenecks between the collected event log and the master pre-defined model. The results showed that although each paper was initially sent to three different reviewers; it was not always possible to make a decision after the first round of reviewing; therefore, additional reviewers were invited. In total, all the accepted and rejected manuscripts were reviewed by an average of 3.9 and 3.2 expert reviewers, respectively. Moreover, obvious violations of the rules and regulations relating to careless or inappropriate peer review of a manuscript-committed by the editorial board and other staff-were identified. Nine blocks of activity in the authentic dataset were not completely compatible with the activities defined in the master model. Also, five of the activity traces were not correctly enabled, and seven activities were missed within the

  17. Review of diagnostic tools to investigate the physical state of rapid granular filters

    DEFF Research Database (Denmark)

    Lopato, Laure Rose; Binning, Philip John; Arvin, Erik

    2012-01-01

    This paper reviews diagnostic tools that can be used at waterworks to investigate the physical and operational state of rapid granular filters. Diagnostic tools can be of interest for the Water Safety Plans of WHO to monitor filters in a proactive manner. The review considers conventional and state...

  18. A review on the beneficial aspects of food processing.

    NARCIS (Netherlands)

    Boekel, van M.A.J.S.; Fogliano, V.; Pellegrini, N.; Stanton, C.; Scholz, G.; Lalljie, S.P.D.; Somoza, V.; Knorr, D.; Rao Jasti, P.; Eisenbrand, G.

    2010-01-01

    The manuscript reviews beneficial aspects of food processing with main focus on cooking/heat treatment, including other food-processing techniques (e.g. fermentation). Benefits of thermal processing include inactivation of food-borne pathogens, natural toxins or other detrimental constituents,

  19. Nuclear Regulatory Commission's antitrust review process: an analysis of the impacts

    International Nuclear Information System (INIS)

    1981-06-01

    The Nuclear Regulatory Commission's (NRC) antitrust process is reviewed and its impacts to small systems and applicant systems are studied. This process takes the form of a description of the NRC's antitrust review process as implemented, a generic categorization of potential impacts and individual case-by-case studies of four different utilities

  20. State Estimation for the Automotive SCR Process

    DEFF Research Database (Denmark)

    Zhou, Guofeng; Huusom, Jakob Kjøbsted; Jørgensen, John Bagterp

    2012-01-01

    Selective catalytic reduction (SCR) of NOx is a widely applied diesel engine exhaust gas aftertreatment technology. For advanced SCR process control, like model predictive control, full state information of the process is required. The ammonia coverage ratio inside the catalyst is difficult to me...

  1. 12 CFR 617.7310 - What is the review process of the CRC?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false What is the review process of the CRC? 617.7310... on Applications; Review of Credit Decisions § 617.7310 What is the review process of the CRC? (a) How will an applicant or borrower know when the CRC will consider the review request? The qualified lender...

  2. IAEA Completes Nuclear Security Review Mission in United States

    International Nuclear Information System (INIS)

    2013-01-01

    Full text: A team of nuclear security experts led by the International Atomic Energy Agency (IAEA) today completed a mission to review nuclear security practices of civil nuclear facilities licensed by the United States Nuclear Regulatory Commission (NRC). Conducted at the U.S. Government's request, the two-week International Physical Protection Advisory Service (IPPAS) mission reviewed the United States' nuclear security-related legislative and regulatory framework. As part of this work, the IPPAS team, led by John O'Dacre of Canada and comprising nine experts from eight IAEA Member States, met with NRC officials and reviewed the physical protection systems at the Center for Neutron Research (NCNR) at the National Institute of Standards and Technology. The IPPAS team concluded that nuclear security within the U.S. civil nuclear sector is robust and sustainable and has been significantly enhanced in recent years. The team identified a number of good practices in the nation's nuclear security regime and at the NCNR. The IPPAS team also made a recommendation and some suggestions for the continuing improvement of nuclear security overall. The mission in the United States was the 60th IPPAS mission organized by the IAEA. 'Independent international peer reviews such as IAEA IPPAS missions are increasingly being recognized for their value as a key component for exchanges of views and advice on nuclear security measures', said Khammar Mrabit, Director of the IAEA Office of Nuclear Security. 'The good practices identified during this mission will contribute to the continuous improvements of nuclear security in other Member States'. The IPPAS team provided a draft report to the NRC and will submit a final report soon. Because it contains security-related information about a specific nuclear site, IPPAS reports are not made public. 'The IPPAS programme gives us a chance to learn from the experience and perspective of our international partners', said NRC Chairman Allison M

  3. Experimental review of exclusive processes in two photon reactions

    International Nuclear Information System (INIS)

    Ronan, M.T.

    1986-07-01

    Recent experimental results on exclusive final stated produced in photon-photon interactions are reviewed. Comparisons between experiments and with perturbative QCD calculations are made for meson and baryon pair production. New results on vector meson pair (rho 0 rho 0 ,rho 0 omega,rho 0 phi,...) production and production of multiparticle (KKππ,K*Kπ,...) final states are summarized. 34 refs

  4. 15 CFR 971.209 - Processing outside the United States.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Processing outside the United States... THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS Applications Contents § 971.209 Processing outside the United States. (a) Except as provided in this section...

  5. A review of processes important in the floodplain setting

    OpenAIRE

    Stuart, M.E.; Lapworth, D.J.

    2011-01-01

    This report reviews the physical and geochemical processes reported in the literature and likely to be operating in the floodplain setting. The review supports a study of the Port Meadow, located within the floodplain of the River Thames to the northwest of the city of Oxford, an area affected by urban pollution. It focuses on floodplains but includes both material for the hyporheic zone and also generally for riparian zones. It describes the processes, generically covers case ...

  6. Effects of acute sleep deprivation on state anxiety levels: a systematic review and meta-analysis.

    Science.gov (United States)

    Pires, Gabriel Natan; Bezerra, Andreia Gomes; Tufik, Sergio; Andersen, Monica Levy

    2016-08-01

    Increased anxiety levels have been widely recognized as one of the most important consequences of sleep deprivation. However, despite this general consensus, there are still aspects of this relationship, such as the extent of the anxiogenic potential and the specific effects of different types of sleep deprivation, which remain unclear. As no broad review has been undertaken to evaluate this relationship, we performed a systematic review and meta-analysis regarding the effects of sleep deprivation on state anxiety. Our search strategy encompassed two databases - Pubmed/Medline and Scopus - through which we were able to identify 756 articles. After the selection process, 18 articles, encompassing 34 experiments, composed our final sample. Our analyses indicate that sleep deprivation, whether total or not, leads to a significant increase in state anxiety levels, but sleep restriction does not. Regarding the effect of the length of the period of sleep deprivation, no significant results were observed, but there was a notable tendency for an increase in anxiety in longer sleep deprivations. With regard to tools, the State-Trait Anxiety Inventory (STAI) seems to be the best one to measure sleep-induced anxiogenesis, while the Profile of Mood States (POMS) presented inconclusive results. In conclusion, it can be affirmed that sleep deprivation induces a state of increased anxiety, with similar results also in the case of total sleep deprivation; however, results in more specific experimental conditions are not definitive. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. First Passage Moments of Finite-State Semi-Markov Processes

    Energy Technology Data Exchange (ETDEWEB)

    Warr, Richard [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cordeiro, James [Air Force Research Lab. (AFRL), Wright-Patterson AFB, OH (United States)

    2014-03-31

    In this paper, we discuss the computation of first-passage moments of a regular time-homogeneous semi-Markov process (SMP) with a finite state space to certain of its states that possess the property of universal accessibility (UA). A UA state is one which is accessible from any other state of the SMP, but which may or may not connect back to one or more other states. An important characteristic of UA is that it is the state-level version of the oft-invoked process-level property of irreducibility. We adapt existing results for irreducible SMPs to the derivation of an analytical matrix expression for the first passage moments to a single UA state of the SMP. In addition, consistent point estimators for these first passage moments, together with relevant R code, are provided.

  8. 34 CFR 668.156 - Approved State process.

    Science.gov (United States)

    2010-07-01

    ... the success rate of students with high school diplomas; and (2) The State's process satisfies the... participating in the process to provide each student they admit without a high school diploma or its recognized... teachers and counselors regarding the student's classroom performance and satisfactory progress toward...

  9. Processing Instruction: A Review of Issues

    Science.gov (United States)

    Rasuki, Muhlisin

    2017-01-01

    This paper provides a critical review of Processing Instruction (PI). This type of instructional option was specifically designed to help second/foreign language (L2) learners grasp meaning manifested in the use of particular grammatical forms in a target language effectively through the provision of input. In this way, PI attempts to help…

  10. IAEA Issues Report on Mission to Review Japan's Nuclear Power Plant Safety Assessment Process

    International Nuclear Information System (INIS)

    2012-01-01

    Full text: A team of international nuclear safety experts has delivered its report on a mission it conducted from 21-31 January 2012 to review Japan's process for assessing nuclear safety at the nation's nuclear power plants. International Atomic Energy Agency (IAEA) officials delivered the IAEA Mission Report to Japanese officials yesterday and made it publicly available today. Following the 11 March 2011 accident at TEPCO's Fukushima Daiichi Nuclear Power Station, Japan's Nuclear and Industrial Safety Agency (NISA) announced the development of a revised safety assessment process for the nation's nuclear power reactors. At the request of the Government of Japan, the IAEA organized a team of five IAEA and three international nuclear safety experts and visited Japan to review NISA's approach to the Comprehensive Assessments for the Safety of Existing Power Reactor Facilities and how NISA examines the results submitted by nuclear operators. A Preliminary Summary Report was issued on 31 January. 'The mission report provides additional information regarding the team's recommendations and overall finding that NISA's instructions to power plants and its review process for the Comprehensive Safety Assessments are generally consistent with IAEA Safety Standards', said team leader James Lyons, Director of the IAEA's Nuclear Installation Safety Division. National safety assessments and their peer review by the IAEA are a key component of the IAEA Action Plan on Nuclear Safety, which was approved by the Agency's Member States following last year's nuclear accident at Fukushima Daiichi Nuclear Power Station. The IAEA safety review mission held meetings in Tokyo with officials from NISA, the Japanese Nuclear Energy Safety Organization (JNES), and the Kansai Electric Power Company (KEPCO), and the team visited the Ohi Nuclear Power Station to see an example of how Japan's Comprehensive Safety Assessment is being implemented by nuclear operators. In its report delivered today

  11. Peer Review as a Strategy for Improving Students' Writing Process

    Science.gov (United States)

    Baker, Kimberly M.

    2016-01-01

    Peer review is an established strategy for improving the quality of students' writing. This study moves beyond the focus on outcomes to assess the peer-review process. In particular, this study focuses on the timing of the peer review, a highly structured feedback form, and student writers' revisions after engaging in peer review. This study draws…

  12. A review of advanced small-scale parallel bioreactor technology for accelerated process development: current state and future need.

    Science.gov (United States)

    Bareither, Rachel; Pollard, David

    2011-01-01

    The pharmaceutical and biotech industries face continued pressure to reduce development costs and accelerate process development. This challenge occurs alongside the need for increased upstream experimentation to support quality by design initiatives and the pursuit of predictive models from systems biology. A small scale system enabling multiple reactions in parallel (n ≥ 20), with automated sampling and integrated to purification, would provide significant improvement (four to fivefold) to development timelines. State of the art attempts to pursue high throughput process development include shake flasks, microfluidic reactors, microtiter plates and small-scale stirred reactors. The limitations of these systems are compared to desired criteria to mimic large scale commercial processes. The comparison shows that significant technological improvement is still required to provide automated solutions that can speed upstream process development. Copyright © 2010 American Institute of Chemical Engineers (AIChE).

  13. Hadron final states in deep inelastic processes

    International Nuclear Information System (INIS)

    Bjorken, J.D.

    1976-05-01

    Lectures are presented dealing mainly with the description and discussion of hadron final states in electroproduction, colliding beams, and neutrino reactions from the point of view of the simple parton model. Also the space-time evolution of final states in the parton model is considered. It is found that the picture of space-time evolution of hadron final states in deep inelastic processes isn't totally trivial and that it can be made consistent with the hypotheses of the parton model. 39 references

  14. 77 FR 11700 - Application, Review, and Reporting Process for Waivers for State Innovation

    Science.gov (United States)

    2012-02-27

    ... State Innovation AGENCY: Centers for Medicare & Medicaid Services (CMS), HHS; Department of the Treasury... of initial applications for a Waiver for State Innovation described in section 1332 of the Patient... Treasury (the Secretaries) to issue regulations regarding procedures for Waivers for State Innovation under...

  15. Energy Demand Modeling Methodology of Key State Transitions of Turning Processes

    Directory of Open Access Journals (Sweden)

    Shun Jia

    2017-04-01

    Full Text Available Energy demand modeling of machining processes is the foundation of energy optimization. Energy demand of machining state transition is integral to the energy requirements of the machining process. However, research focus on energy modeling of state transition is scarce. To fill this gap, an energy demand modeling methodology of key state transitions of the turning process is proposed. The establishment of an energy demand model of state transition could improve the accuracy of the energy model of the machining process, which also provides an accurate model and reliable data for energy optimization of the machining process. Finally, case studies were conducted on a CK6153i CNC lathe, the results demonstrating that predictive accuracy with the proposed method is generally above 90% for the state transition cases.

  16. Image processing system for videotape review

    International Nuclear Information System (INIS)

    Bettendroffer, E.

    1988-01-01

    In a nuclear plant, the areas in which fissile materials are stored or handled, have to be monitored continuously. One method of surveillance is to record pictures of TV cameras with determined time intervals on special video recorders. The 'time lapse' recorded tape is played back at normal speed and an inspector checks visually the pictures. This method requires much manpower and an automated method would be useful. The present report describes an automatic reviewing method based on an image processing system; the system detects scene changes in the picture sequence and stores the reduced data set on a separate video tape. The resulting reduction of reviewing time by inspector is important for surveillance data with few movements

  17. Quantum state discrimination and its applications

    International Nuclear Information System (INIS)

    Bae, Joonwoo; Kwek, Leong-Chuan

    2015-01-01

    Quantum state discrimination underlies various applications in quantum information processing tasks. It essentially describes the distinguishability of quantum systems in different states, and the general process of extracting classical information from quantum systems. It is also useful in quantum information applications, such as the characterization of mutual information in cryptographic protocols, or as a technique for deriving fundamental theorems on quantum foundations. It has deep connections to physical principles such as relativistic causality. Quantum state discrimination traces a long history of several decades, starting with the early attempts to formalize information processing of physical systems such as optical communication with photons. Nevertheless, in most cases, the problems of finding optimal strategies of quantum state discrimination remain unsolved, and related applications are valid in some limited cases only. The present review aims to provide an overview on quantum state discrimination, covering some recent progress, and addressing applications in some selected areas. This review serves to strengthen the link between results in quantum state discrimination and quantum information applications, by showing the ways in which the fundamental results are exploited in applications and vice versa. (topical review)

  18. A Review of Underground Coal Gasification Research and Development in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Camp, D. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-06-26

    An intense and productive period of research and development on underground coal gasification (UCG) took place in the United States from the mid-1970’s through the late 1980’s. It began with the translation and review of Soviet literature and ended with the Rocky Mountain 1 field test. This demonstrated the feasibility of newly-developed technologies that form the basis of many UCG projects around the world today. This period began with little domestic understanding of UCG and ended with an accurate observation-based conceptual model and a corresponding predictive multi-physics mathematical model of the process. The many accomplishments of this period form the main content of this report. This report also covers recent U.S. activities and accomplishments during the period 2004-2015, and touches briefly on the Bureau of Mines efforts between 1948 and 1963. Most of the activities were funded by the United States Department of Energy and its predecessors. While private/commercially-funded activities are reviewed here, the emphasis is on government-funded work. It has a much greater extent of publicly available reports and papers, and they generally contain much greater technical detail. Field tests were the marquis activities around which an integrated multi-faceted program was built. These are described in detail in Section 4. Highlights from modeling efforts are briefly covered, as the program was integrated and well-rounded, with field results informing models and vice-versa. The primary goal of this report is to review what has been learned about UCG from the U.S. experience in aggregate. This includes observations, conclusions, lessons-learned, phenomena understood, and technology developed. The latter sections of this report review these things.

  19. Business process compliance checking : current state and future challenges

    NARCIS (Netherlands)

    El Kharbili, M.; Alves De Medeiros, A.K.; Stein, S.; Aalst, van der W.M.P.; Loos, P.; Nüttgens, M.; Turowski, K.; Werth, D.

    2008-01-01

    Regulatory compliance sets new requirements for business process management (BPM). Companies seek to enhance their corporate governance processes and are required to put in place measures for ensuring compliance to regulations. In this sense, this position paper (i) reviews the current work in the

  20. Kinetic study of solid-state processes

    International Nuclear Information System (INIS)

    Malek, Jiri; Mitsuhashi, Takefumi

    2003-01-01

    A simple method for kinetic analysis of solid-state processes has been developed and the criteria capable of classifying different processes are explored. They provide a useful tool for the determination of the most suitable kinetic model. The method has been applied to the analysis of calorimetric data corresponding to the crystallization processes in amorphous ZrO 2 . It is found that the crystallization kinetics of amorphous powder sample exhibits a complex behavior under non-isothermal conditions. A two-parameter model provides a satisfactory description of the crystallization process for isothermal and non-isothermal conditions. This enables better control of crystallization extent in fine ZrO 2 powders that is important for preparation of zirconia ceramics with defined properties. (author)

  1. Harvesting Robots for High-value Crops: State-of-the-art Review and Challenges Ahead

    NARCIS (Netherlands)

    Bac, C.W.; Henten, van E.; Hemming, J.; Edan, Y.

    2014-01-01

    This review article analyzes state-of-the-art and future perspectives for harvesting robots in high-value crops. The objectives were to characterize the crop environment relevant for robotic harvesting, to perform a literature review on the state-of-the-art of harvesting robots using quantitative

  2. 76 FR 13931 - Department of State Retrospective Review under E.O. 13563

    Science.gov (United States)

    2011-03-15

    ... DEPARTMENT OF STATE 22 CFR Chapter I 28 CFR Chapter XI [Public Notice: 7351] Department of State Retrospective Review under E.O. 13563 AGENCY: Department of State. ACTION: Request for information and comment. SUMMARY: As part of its implementation of Executive Order 13563, ``Improving Regulation and Regulatory...

  3. A review on the susceptor assisted microwave processing of materials

    International Nuclear Information System (INIS)

    Bhattacharya, Madhuchhanda; Basak, Tanmay

    2016-01-01

    Microwave processing has received significant attention based on the energy efficient volumetric processing. The internal heat generation during the microwave heating unleashes the heat transfer limitations of the conventional furnaces and thus, the microwave processing can be performed at much faster rates than the conventional furnaces. Susceptors further accelerate the microwave processing via providing a two-way heating with reduced heat losses from the surface of the material. In addition, the rapid initial heating via susceptors becomes the key factor to execute the energy efficient microwave processing for the poorly microwave absorbing materials. These characteristics have been massively exploited for various applications (material processing, synthesis and waste treatments) over the last few decades and this review evaluates those processing characteristics with an emphasis on the energy efficiency. Till date, the advancement of the susceptor assisted microwave processing is primarily based on the experimental trials and this review brings together various case studies so that the readers can have a clear idea about the current status in each field of applications. This can be of immense help not only to select the appropriate susceptor, but also to select the future research direction for the advancement of the energy efficient processing. - Highlights: • Susceptor assisted hybrid microwave processing has been reviewed. • Energy efficiency of the hybrid heating has been analyzed for various applications. • The applications include material processing, synthesis and waste treatment. • The role of susceptors on the energy efficient material processing is highlighted. • The enhancement of the processing via the susceptors has been reported.

  4. Resting state fMRI: A review on methods in resting state connectivity analysis and resting state networks.

    Science.gov (United States)

    Smitha, K A; Akhil Raja, K; Arun, K M; Rajesh, P G; Thomas, Bejoy; Kapilamoorthy, T R; Kesavadas, Chandrasekharan

    2017-08-01

    The inquisitiveness about what happens in the brain has been there since the beginning of humankind. Functional magnetic resonance imaging is a prominent tool which helps in the non-invasive examination, localisation as well as lateralisation of brain functions such as language, memory, etc. In recent years, there is an apparent shift in the focus of neuroscience research to studies dealing with a brain at 'resting state'. Here the spotlight is on the intrinsic activity within the brain, in the absence of any sensory or cognitive stimulus. The analyses of functional brain connectivity in the state of rest have revealed different resting state networks, which depict specific functions and varied spatial topology. However, different statistical methods have been introduced to study resting state functional magnetic resonance imaging connectivity, yet producing consistent results. In this article, we introduce the concept of resting state functional magnetic resonance imaging in detail, then discuss three most widely used methods for analysis, describe a few of the resting state networks featuring the brain regions, associated cognitive functions and clinical applications of resting state functional magnetic resonance imaging. This review aims to highlight the utility and importance of studying resting state functional magnetic resonance imaging connectivity, underlining its complementary nature to the task-based functional magnetic resonance imaging.

  5. State of the art review of radioactive waste volume reduction techniques for commercial nuclear power plants

    International Nuclear Information System (INIS)

    1980-04-01

    A review is made of the state of the art of volume reduction techniques for low level liquid and solid radioactive wastes produced as a result of: (1) operation of commercial nuclear power plants, (2) storage of spent fuel in away-from-reactor facilities, and (3) decontamination/decommissioning of commercial nuclear power plants. The types of wastes and their chemical, physical, and radiological characteristics are identified. Methods used by industry for processing radioactive wastes are reviewed and compared to the new techniques for processing and reducing the volume of radioactive wastes. A detailed system description and report on operating experiences follow for each of the new volume reduction techniques. In addition, descriptions of volume reduction methods presently under development are provided. The Appendix records data collected during site surveys of vendor facilities and operating power plants. A Bibliography is provided for each of the various volume reduction techniques discussed in the report

  6. The Markov process admits a consistent steady-state thermodynamic formalism

    Science.gov (United States)

    Peng, Liangrong; Zhu, Yi; Hong, Liu

    2018-01-01

    The search for a unified formulation for describing various non-equilibrium processes is a central task of modern non-equilibrium thermodynamics. In this paper, a novel steady-state thermodynamic formalism was established for general Markov processes described by the Chapman-Kolmogorov equation. Furthermore, corresponding formalisms of steady-state thermodynamics for the master equation and Fokker-Planck equation could be rigorously derived in mathematics. To be concrete, we proved that (1) in the limit of continuous time, the steady-state thermodynamic formalism for the Chapman-Kolmogorov equation fully agrees with that for the master equation; (2) a similar one-to-one correspondence could be established rigorously between the master equation and Fokker-Planck equation in the limit of large system size; (3) when a Markov process is restrained to one-step jump, the steady-state thermodynamic formalism for the Fokker-Planck equation with discrete state variables also goes to that for master equations, as the discretization step gets smaller and smaller. Our analysis indicated that general Markov processes admit a unified and self-consistent non-equilibrium steady-state thermodynamic formalism, regardless of underlying detailed models.

  7. 7 CFR 210.5 - Payment process to States.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS NATIONAL SCHOOL LUNCH PROGRAM Reimbursement Process for States and School.... (c) Recovery of funds. FNS will recover any Federal funds made available to the State agency under...

  8. Comparing the Medicaid Retrospective Drug Utilization Review Program Cost-Savings Methods Used by State Agencies.

    Science.gov (United States)

    Prada, Sergio I

    2017-12-01

    The Medicaid Drug Utilization Review (DUR) program is a 2-phase process conducted by Medicaid state agencies. The first phase is a prospective DUR and involves electronically monitoring prescription drug claims to identify prescription-related problems, such as therapeutic duplication, contraindications, incorrect dosage, or duration of treatment. The second phase is a retrospective DUR and involves ongoing and periodic examinations of claims data to identify patterns of fraud, abuse, underutilization, drug-drug interaction, or medically unnecessary care, implementing corrective actions when needed. The Centers for Medicare & Medicaid Services requires each state to measure prescription drug cost-savings generated from its DUR programs on an annual basis, but it provides no guidance or unified methodology for doing so. To describe and synthesize the methodologies used by states to measure cost-savings using their Medicaid retrospective DUR program in federal fiscal years 2014 and 2015. For each state, the cost-savings methodologies included in the Medicaid DUR 2014 and 2015 reports were downloaded from Medicaid's website. The reports were then reviewed and synthesized. Methods described by the states were classified according to research designs often described in evaluation textbooks. In 2014, the most often used prescription drugs cost-savings estimation methodology for the Medicaid retrospective DUR program was a simple pre-post intervention method, without a comparison group (ie, 12 states). In 2015, the most common methodology used was a pre-post intervention method, with a comparison group (ie, 14 states). Comparisons of savings attributed to the program among states are still unreliable, because of a lack of a common methodology available for measuring cost-savings. There is great variation among states in the methods used to measure prescription drug utilization cost-savings. This analysis suggests that there is still room for improvement in terms of

  9. Critical Review of NOAA's Observation Requirements Process

    Science.gov (United States)

    LaJoie, M.; Yapur, M.; Vo, T.; Templeton, A.; Bludis, D.

    2017-12-01

    NOAA's Observing Systems Council (NOSC) maintains a comprehensive database of user observation requirements. The requirements collection process engages NOAA subject matter experts to document and effectively communicate the specific environmental observation measurements (parameters and attributes) needed to produce operational products and pursue research objectives. User observation requirements documented using a structured and standardized manner and framework enables NOAA to assess its needs across organizational lines in an impartial, objective, and transparent manner. This structure provides the foundation for: selecting, designing, developing, acquiring observing technologies, systems and architectures; budget and contract formulation and decision-making; and assessing in a repeatable fashion the productivity, efficiency and optimization of NOAA's observing system enterprise. User observation requirements are captured independently from observing technologies. Therefore, they can be addressed by a variety of current or expected observing capabilities and allow flexibility to be remapped to new and evolving technologies. NOAA's current inventory of user observation requirements were collected over a ten-year period, and there have been many changes in policies, mission priorities, and funding levels during this time. In light of these changes, the NOSC initiated a critical, in-depth review to examine all aspects of user observation requirements and associated processes during 2017. This presentation provides background on the NOAA requirements process, major milestones and outcomes of the critical review, and plans for evolving and connecting observing requirements processes in the next year.

  10. Review process of PSA level 2 of KBR - Concept and Experience

    International Nuclear Information System (INIS)

    Andernacht, M.; Glaser, H.; Sonnenkalb, M.

    2013-01-01

    In Germany, a periodic safety review (PSR) has to be performed every ten years by the utility. In the past, a PSR only included a plant-specific probabilistic safety analysis (PSA) Level 1 study. Since a revised version of the German PSA guideline has been released in 2005, these plant-specific PSAs have to include a PSA Level 2, too. For the NPP Brokdorf (KBR) PSA Level 2 project, an agreement was reached between all parties involved that the study will be performed not as a part of the PSR process, but supplementary to it. This paper will focus on conclusions and findings from an ongoing parallel review process of the first full scope PSA Level 2 performed by the utility for KBR, a typical German PWR-1300. The responsible authority 'Ministerium fuer Soziales, Gesundheit, Familie, Jugend und Senioren des Landes Schleswig- Holstein' (MSGF) initiated this parallel review process in agreement with the utility KBR and the E.ON Kernkraft in 2006. The project will be completed soon. Such a review process allows that essential steps of the PSA will be reviewed and commented before the PSA Level 2 will be finished. So the benefit from this parallel review process is a significant enhancement of the quality and completeness of the PSA Level 2 study as the majority of the recommendations given by the review team has been taken over by the utility and the developer of the PSA, the AREVA NP company. Further, a common understanding and agreement will be reached at the end between all parties involved on the major topics of the PSA Level 2 study. The paper is followed by the slides of the presentation. (authors)

  11. Review process of PSA Level 2 of KBR. Concept and experience

    International Nuclear Information System (INIS)

    Andernacht, Martin; Glaser, Hendrik; Sonnenkalb, Martin

    2009-01-01

    In Germany, a periodic safety review (PSR) has to be performed every 10 years by the utility. In the past, a PSR only included a plant-specific probabilistic safety analysis (PSA) Level 1 study. For the NPP Brokdorf (KBR) PSA Level 2 project, an agreement was reached between all parties involved that the study will be performed not as a part of the PSR process, but supplementary to it. Since a revised version of the German PSA guideline has been released in 2005, these plant-specific PSAs have to include a PSA Level 2, too. This paper will focus on conclusions and findings from a ongoing parallel review process of the first full scope PSA Level 2 performed by the utility for KBR, a typical German PWR-1300. The responsible authority 'Ministerium fuer Soziales, Gesundheit, Familie, Jugend und Senioren des Landes Schleswig-Holstein (MSGF)' (Ministry of Social Affairs, Health, Family, Youth and Senior Citizens of Schleswig-Holstein) initiated this parallel review process in agreement with the utility KBR and the E.ON Kernkraft in 2006. The project will be completed soon. Such a review process allows that essential steps of the PSA will be reviewed and commented before the PSA Level 2 will be finished. So the benefit from this parallel review process is a significant enhancement of the quality and completeness of the PSA Level 2 study as the majority of the recommendations given by the review team has been taken over by the utility and the developer of the PSA, the Areva NP company. Further, a common understanding and agreement will be reached at the end between all parties involved on the major topics of the PSA Level 2 study. (orig.)

  12. Seismic response of buried pipelines: a state-of-the-art review

    International Nuclear Information System (INIS)

    Datta, T.K.

    1999-01-01

    A state-of-the-art review of the seismic response of buried pipelines is presented. The review includes modeling of soil-pipe system and seismic excitation, methods of response analysis of buried pipelines, seismic behavior of buried pipelines under different parametric variations, seismic stresses at the bends and intersections of network of pipelines. pipe damage in earthquakes and seismic risk analysis of buried pipelines. Based on the review, the future scope of work on the subject is outlined. (orig.)

  13. The MELCOR peer review process and findings

    International Nuclear Information System (INIS)

    Boyack, B.E.; Dhir, V.K.; Haste, T.J.; Gieseke, J.A.; Viskanta, R.; Kenton, M.A.; Khatib-Rahbar, M.; Leonard, M.T.

    1991-01-01

    MELCOR is a fully integrated, engineering-level computer code the models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the US Nuclear Regulatory Commission (NRC) as a second-generation plant risk assessment tool and as the successor to the Source Term Code Package. MELCOR has been under development since 1982. The code has now reached sufficient maturity that a number of organizations inside and outside the NRC are using or are planning to use the code. Although the quality control and validation efforts are in progress, the NRC identified the need to have a broad technical review of recognized experts to determine or confirm the technical adequacy of the code for the serious and complex analyses it is expected to perform. A peer review committee was organized using recognized experts from the national laboratories, universities, MELCOR user community, and independent contractors to perform this assessment. The objective of this paper is to summarize the peer review process and to summarize the findings of the MELCOR Peer Review Committee formed to conduct the MELCOR peer review

  14. Moving beyond relationship and task conflict: toward a process-state perspective.

    Science.gov (United States)

    DeChurch, Leslie A; Mesmer-Magnus, Jessica R; Doty, Dan

    2013-07-01

    Teams are formed to benefit from an expanded pool of expertise and experience, yet 2 aspects of the conflict stemming from those core differences will ultimately play a large role in determining team viability and productivity: conflict states and conflict processes. The current study theoretically reorganizes the literature on team conflict--distinguishing conflict states from conflict processes--and details the effects of each on team effectiveness. Findings from a meta-analytic cumulation of 45 independent studies (total number of teams = 3,218) suggest states and processes are distinct and important predictors of team performance and affective outcomes. Controlling for conflict states (i.e., task and relationship conflict), conflict processes explain an additional 13% of the variance in both team performance and team affective outcomes. Furthermore, findings reveal particular conflict processes that are beneficial and others detrimental to teams. The truth about team conflict: conflict processes, that is, how teams interact regarding their differences, are at least as important as conflict states, that is, the source and intensity of their perceived incompatibilities. PsycINFO Database Record (c) 2013 APA, all rights reserved.

  15. 45 CFR 1355.33 - Procedures for the review.

    Science.gov (United States)

    2010-10-01

    ... review. (a) The full child and family services reviews will: (1) Consist of a two-phase process that... include children who entered foster care during the year under review. In-home cases must be drawn... information by the State; or (2) ACF and the State will review additional cases using only those indicators in...

  16. Implementing a Course Review Process for a Continuous Quality Improvement Model for a Medical School Curriculum.

    Science.gov (United States)

    Ward, Cassandra S; Andrade, Amy; Walker-Winfree, Lena

    2018-01-01

    In 1901, Abraham Flexner, a research scholar at the Carnegie Foundation for the Advancement of Teaching, visited 155 medical schools in the United States and Canada to assess medical education. Flexner's recommendations became the foundation for the Liaison Committee on Medical Education accreditation, a voluntary, peer-reviewed quality assurance process to determine whether a medical education program meets established standards. The Meharry Medical College School of Medicine, a historically Black college/university (HBCU) established the Office of Curriculum Evaluation and Effectiveness in 2013 to ensure the consistent monitoring of the medical education program's compliance with accreditation standards. The motto and logo, LCME 24/7, highlight the school's emphasis on meeting accreditation standards. The school uses the 1994 Plan-Do-Study-Act Cycle for Learning and Improvement for continuous review of course content, outcomes, and evaluations. This process identifies strengths, challenges, and opportunities for innovative steps for continuous quality improvements to the curriculum.

  17. Minimally conscious state or cortically mediated state?

    Science.gov (United States)

    Naccache, Lionel

    2018-04-01

    Durable impairments of consciousness are currently classified in three main neurological categories: comatose state, vegetative state (also recently coined unresponsive wakefulness syndrome) and minimally conscious state. While the introduction of minimally conscious state, in 2002, was a major progress to help clinicians recognize complex non-reflexive behaviours in the absence of functional communication, it raises several problems. The most important issue related to minimally conscious state lies in its criteria: while behavioural definition of minimally conscious state lacks any direct evidence of patient's conscious content or conscious state, it includes the adjective 'conscious'. I discuss this major problem in this review and propose a novel interpretation of minimally conscious state: its criteria do not inform us about the potential residual consciousness of patients, but they do inform us with certainty about the presence of a cortically mediated state. Based on this constructive criticism review, I suggest three proposals aiming at improving the way we describe the subjective and cognitive state of non-communicating patients. In particular, I present a tentative new classification of impairments of consciousness that combines behavioural evidence with functional brain imaging data, in order to probe directly and univocally residual conscious processes.

  18. Embedding a State Space Model Into a Markov Decision Process

    DEFF Research Database (Denmark)

    Nielsen, Lars Relund; Jørgensen, Erik; Højsgaard, Søren

    2011-01-01

    In agriculture Markov decision processes (MDPs) with finite state and action space are often used to model sequential decision making over time. For instance, states in the process represent possible levels of traits of the animal and transition probabilities are based on biological models...

  19. Processing and Analysis of Multichannel Extracellular Neuronal Signals: State-of-the-art and Challenges

    Directory of Open Access Journals (Sweden)

    Mufti eMahmud

    2016-06-01

    Full Text Available In recent years multichannel neuronal signal acquisition systems have allowed scientists to focus on research questions which were otherwise impossible. They act as a powerful means to study brain (dysfunctions in in-vivo and in in-vitro animal models. Typically, each session of electrophysiological experiments with multichannel data acquisition systems generate large amount of raw data. For example, a 128 channel signal acquisition system with 16 bits A/D conversion and 20 kHz sampling rate will generate approximately 17 GB data per hour (uncompressed. This poses an important and challenging problem of inferring conclusions from the large amounts of acquired data. Thus, automated signal processing and analysis tools are becoming a key component in neuroscience research, facilitating extraction of relevant information from neuronal recordings in a reasonable time. The purpose of this review is to introduce the reader to the current state-of-the-art of open-source packages for (semiautomated processing and analysis of multichannel extracellular neuronal signals (i.e., neuronal spikes, local field potentials, electroencephalogram, etc., and the existing Neuroinformatics infrastructure for tool and data sharing. The review is concluded by pinpointing some major challenges that are to be faced, which include the development of novel benchmarking techniques, cloud-based distributed processing and analysis tools, as well as defining novel means to share and standardize data.

  20. Progress in centralised ethics review processes: Implications for multi-site health evaluations.

    Science.gov (United States)

    Prosser, Brenton; Davey, Rachel; Gibson, Diane

    2015-04-01

    Increasingly, public sector programmes respond to complex social problems that intersect specific fields and individual disciplines. Such responses result in multi-site initiatives that can span nations, jurisdictions, sectors and organisations. The rigorous evaluation of public sector programmes is now a baseline expectation. For evaluations of large and complex multi-site programme initiatives, the processes of ethics review can present a significant challenge. However in recent years, there have been new developments in centralised ethics review processes in many nations. This paper provides the case study of an evaluation of a national, inter-jurisdictional, cross-sector, aged care health initiative and its encounters with Australian centralised ethics review processes. Specifically, the paper considers progress against the key themes of a previous five-year, five nation study (Fitzgerald and Phillips, 2006), which found that centralised ethics review processes would save time, money and effort, as well as contribute to more equitable workloads for researchers and evaluators. The paper concludes with insights for those charged with refining centralised ethics review processes, as well as recommendations for future evaluators of complex multi-site programme initiatives. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. Airway clearance techniques in neuromuscular disorders: A state of the art review.

    Science.gov (United States)

    Chatwin, Michelle; Toussaint, Michel; Gonçalves, Miguel R; Sheers, Nicole; Mellies, Uwe; Gonzales-Bermejo, Jesus; Sancho, Jesus; Fauroux, Brigitte; Andersen, Tiina; Hov, Brit; Nygren-Bonnier, Malin; Lacombe, Matthieu; Pernet, Kurt; Kampelmacher, Mike; Devaux, Christian; Kinnett, Kathy; Sheehan, Daniel; Rao, Fabrizio; Villanova, Marcello; Berlowitz, David; Morrow, Brenda M

    2018-03-01

    This is a unique state of the art review written by a group of 21 international recognized experts in the field that gathered during a meeting organized by the European Neuromuscular Centre (ENMC) in Naarden, March 2017. It systematically reports the entire evidence base for airway clearance techniques (ACTs) in both adults and children with neuromuscular disorders (NMD). We not only report randomised controlled trials, which in other systematic reviews conclude that there is a lack of evidence base to give an opinion, but also include case series and retrospective reviews of practice. For this review, we have classified ACTs as either proximal (cough augmentation) or peripheral (secretion mobilization). The review presents descriptions; standard definitions; the supporting evidence for and limitations of proximal and peripheral ACTs that are used in patients with NMD; as well as providing recommendations for objective measurements of efficacy, specifically for proximal ACTs. This state of the art review also highlights how ACTs may be adapted or modified for specific contexts (e.g. in people with bulbar insufficiency; children and infants) and recommends when and how each technique should be applied. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  2. Finite-State Methodology in Natural Language Processing

    Directory of Open Access Journals (Sweden)

    Michal Korzycki

    2001-01-01

    Full Text Available Recent mathematical and algorithmic results in the field of finite-state technology, as well the increase in computing power, have constructed the base for a new approach in natural language processing. However the task of creating an appropriate model that would describe the phenomena of the natural language is still to be achieved. ln this paper I'm presenting some notions related to the finite-state modelling of syntax and morphology.

  3. Waste management state-of-the-art review for mixed-oxide fuel fabrication facilities

    International Nuclear Information System (INIS)

    Woodsum, H.C.; Goodman, J.

    1977-11-01

    This report provides a state-of-the-art review of the waste management for mixed-oxide (MOX) fuel fabrication facilities. The intent of this report is to focus on those processes and regulatory issues which have a direct bearing on existing and anticipated future management of transuranic (TRU) wastes from a commercial MOX fuel fabrication faciity. Recent government agency actions are reviewed with regard to their impact on existing and projected waste management regulations; and it is concluded that acceleration in the development of regulations, standards, and criteria is one of the most important factors in the implementation of improved MOX plant waste management techniques. ERDA development programs pertaining to the management of TRU wastes have been reviewed and many promising methods for volume reduction of both solid and liquid wastes are discussed. For solid wastes, these methods include compaction, shredding and baling, combustion, acid digestion, and decontamination by electropolishing or by electrolytic treatment. For liquid wastes, treatment options include evaporation, drying, calcination, flocculation, ion exchange, filtration, reverse osmosis, combustion (of combustible organics), and bioprocessing. Based on this review, it is recommended that ERDA continue with its combustible solid waste volume reduction program and complete these development activities by 1979. Following this, a critical evaluation of solid waste volume reduction techniques should be made to select the most promising systems for a commercial MOX fuel facility

  4. Research progress of novel adsorption processes in water purification:A review

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    As an effective, efficient, and economic approach for water purification, adsorbents and adsorption processes have been widely studied and applied in different aspects for a long time. In the recent years, a lot of novel adsorption processes have been developed for enhancing the efficiency of removing the organic and inorganic contaminants from water. This article reviews some new adsorbents and advanced adsorption methods that specialize in their compositions, structures, functions, and characteristics used in water treatment. The review emphasizes adsorption/catalytic oxidation process, adsorption/catalytic reduction process, adsorption coupled with redox process, biomimetic sorbent and its sorption behaviors of POPs, and modified adsorbents and their water purification efficiency.

  5. Review and Analysis of Laws Related to Strangulation in 50 States

    Science.gov (United States)

    Laughon, Kathryn; Glass, Nancy; Worrell, Claude

    2009-01-01

    Nonlethal strangulation of intimate partners has substantial direct health effects and is associated with an increased risk of later lethal violence by a partner or ex-intimate partner but can be difficult to prosecute under felony assault statutes. After review of state laws regarding assault, the authors identified 10 states with specific…

  6. Overcoming pitfalls: Results from a mandatory peer review process for written examinations.

    Science.gov (United States)

    Wilby, Kyle John; El Hajj, Maguy S; El-Bashir, Marwa; Mraiche, Fatima

    2018-04-01

    Written assessments are essential components of higher education practices. However, faculty members encounter common pitfalls when designing questions intended to evaluate student-learning outcomes. The objective of this project was to determine the impact of a mandatory examination peer review process on question accuracy, alignment with learning objectives, use of best practices in question design, and language/grammar. A mandatory peer review process was implemented for all midterm (before phase) and final (after phase) examinations. Peer review occurred by two reviewers and followed a pre-defined guidance document. Non-punitive feedback given to faculty members served as the intervention. Frequencies of flagged questions according to guidance categories were compared between phases. A total of 21 midterm and 21 final exam reviews were included in the analysis. A total of 637 questions were reviewed across all midterms and 1003 questions were reviewed across all finals. Few questions were flagged for accuracy and alignment with learning outcomes. The median total proportion of questions flagged for best practices was significantly lower for final exams versus midterm exams (15.8 vs. 6.45%, p = 0.014). The intervention did not influence language and grammar errors (9.68 vs. 10.0% of questions flagged before and after, respectively, p = 0.305). A non-punitive peer review process for written examinations can overcome pitfalls in exam creation and improve best practices in question writing. The peer-review process had a substantial effect at flagging language/grammar errors but error rate did not differ between midterm and final exams. Copyright © 2017 Elsevier Inc. All rights reserved.

  7. The viable but non-culturable state in pathogenic Escherichia coli: A general review

    Directory of Open Access Journals (Sweden)

    Jennifer A. Pienaar

    2016-05-01

    Objectives: This review discusses various general aspects of the VBNC state, the mechanisms and possible public health impact of indicator and pathogenic E. coli entering into the VBNC state. Method: A literature review was conducted to ascertain the possibleimpact of E. coli entering into the VBNC state. Results: Escherichia coli enter into the VBNC state by means of several induction mechanisms. Various authors have found that E. coli can be resuscitated post-VBNC. Certain strains of pathogenic E. coli are still able to produce toxins in the VBNC state, whilst others are avirulent during the VBNC state but are able to regain virulence after resuscitation. Conclusion: Pathogenic and indicator E. coli entering into the VBNC state could have an adverse effect on public health if conventional detection methods are used, where the number of viable cells could be underestimated and the VBNC cells still produce toxins or could, at anytime, be resuscitated and become virulent again.

  8. Processes for pretreating lignocellulosic biomass: A review

    Energy Technology Data Exchange (ETDEWEB)

    McMillan, J.D.

    1992-11-01

    This paper reviews existing and proposed pretreatment processes for biomass. The focus is on the mechanisms by which the various pretreatments act and the influence of biomass structure and composition on the efficacy of particular pretreatment techniques. This analysis is used to identify pretreatment technologies and issues that warrant further research.

  9. Ancilla-approximable quantum state transformations

    International Nuclear Information System (INIS)

    Blass, Andreas; Gurevich, Yuri

    2015-01-01

    We consider the transformations of quantum states obtainable by a process of the following sort. Combine the given input state with a specially prepared initial state of an auxiliary system. Apply a unitary transformation to the combined system. Measure the state of the auxiliary subsystem. If (and only if) it is in a specified final state, consider the process successful, and take the resulting state of the original (principal) system as the result of the process. We review known information about exact realization of transformations by such a process. Then we present results about approximate realization of finite partial transformations. We not only consider primarily the issue of approximation to within a specified positive ε, but also address the question of arbitrarily close approximation

  10. Ancilla-approximable quantum state transformations

    Energy Technology Data Exchange (ETDEWEB)

    Blass, Andreas [Department of Mathematics, University of Michigan, Ann Arbor, Michigan 48109 (United States); Gurevich, Yuri [Microsoft Research, Redmond, Washington 98052 (United States)

    2015-04-15

    We consider the transformations of quantum states obtainable by a process of the following sort. Combine the given input state with a specially prepared initial state of an auxiliary system. Apply a unitary transformation to the combined system. Measure the state of the auxiliary subsystem. If (and only if) it is in a specified final state, consider the process successful, and take the resulting state of the original (principal) system as the result of the process. We review known information about exact realization of transformations by such a process. Then we present results about approximate realization of finite partial transformations. We not only consider primarily the issue of approximation to within a specified positive ε, but also address the question of arbitrarily close approximation.

  11. Chinese vinegar and its solid-state fermentation process

    NARCIS (Netherlands)

    Liu Dengru,; Yang Zhu, Yang; Beeftink, H.H.; Ooijkaas, L.P.; Rinzema, A.; Jian Chen,; Tramper, J.

    2004-01-01

    China uses solid-state fermentation (SSF) processes on a large scale for products such as vinegar, Chinese distilled spirit, soy sauce, Furu, and other national foods that are consumed around the world. In this article, the typical SSF process is discussed, with a focus on Chinese vinegars,

  12. Literature review for oxalate oxidation processes and plutonium oxalate solubility

    Energy Technology Data Exchange (ETDEWEB)

    Nash, C. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-10-01

    A literature review of oxalate oxidation processes finds that manganese(II)-catalyzed nitric acid oxidation of oxalate in precipitate filtrate is a viable and well-documented process. The process has been operated on the large scale at Savannah River in the past, including oxidation of 20 tons of oxalic acid in F-Canyon. Research data under a variety of conditions show the process to be robust. This process is recommended for oxalate destruction in H-Canyon in the upcoming program to produce feed for the MOX facility. Prevention of plutonium oxalate precipitation in filtrate can be achieved by concentrated nitric acid/ferric nitrate sequestration of oxalate. Organic complexants do not appear practical to sequester plutonium. Testing is proposed to confirm the literature and calculation findings of this review at projected operating conditions for the upcoming campaign.

  13. The Development and Current State of Translation Process Research

    DEFF Research Database (Denmark)

    Lykke Jakobsen, Arnt

    2014-01-01

    The development and current state of translation process research ch Arnt Lykke Jakobsen Copenhagen Business School lInterest in process-oriented translation studies has been intense for the past almost half a century. Translation process research (TPR) is the label we have used to refer to a spe...... itself, into regions like cognitive psychology, psycho- and neurolinguistics, and neuroscience, where the interest in what goes on in our heads is also very strong.......The development and current state of translation process research ch Arnt Lykke Jakobsen Copenhagen Business School lInterest in process-oriented translation studies has been intense for the past almost half a century. Translation process research (TPR) is the label we have used to refer...... which simultaneously tracks the translator’s eye movements across a screen displaying both a source text and the translator’s emerging translation. This research method was developed as a means of qualifying and strengthening translation process hypotheses based on verbal reports by providing additional...

  14. State-Space Inference and Learning with Gaussian Processes

    OpenAIRE

    Turner, R; Deisenroth, MP; Rasmussen, CE

    2010-01-01

    18.10.13 KB. Ok to add author version to spiral, authors hold copyright. State-space inference and learning with Gaussian processes (GPs) is an unsolved problem. We propose a new, general methodology for inference and learning in nonlinear state-space models that are described probabilistically by non-parametric GP models. We apply the expectation maximization algorithm to iterate between inference in the latent state-space and learning the parameters of the underlying GP dynamics model. C...

  15. The Four-Part Literature Review Process: Breaking It Down for Students

    Science.gov (United States)

    Price, Rebecca H.

    2017-01-01

    Both undergraduate and graduate students face similar challenges when tasked with writing literature reviews. Breaking down the literature review into a four-part process helps students decrease frustration and increase quality. This article provides usable advice for anyone teaching or writing literature reviews. Tips and illustrations illuminate…

  16. Central Processing Dysfunctions in Children: A Review of Research.

    Science.gov (United States)

    Chalfant, James C.; Scheffelin, Margaret A.

    Research on central processing dysfunctions in children is reviewed in three major areas. The first, dysfunctions in the analysis of sensory information, includes auditory, visual, and haptic processing. The second, dysfunction in the synthesis of sensory information, covers multiple stimulus integration and short-term memory. The third area of…

  17. Addressing Clinical Faculty Need: Creating a Process and Evaluation for Peer Review of Practice

    Directory of Open Access Journals (Sweden)

    Jean Y. Moon

    2014-01-01

    Full Text Available Objectives: To describe the evolving process and evaluate the perceived value of peer review for clinical faculty. Methods: Using a 5-point Likert scale, clinical faculty rated the value of an electronic peer review process by completing an electronic 30 item survey across six areas of clinical faculty practice-related activity. Based on feedback, modifications were made and faculty were re-surveyed the following year. Results: Initially, 78% of faculty found peer review to be beneficial, mostly in the area of practice development and portions of practice dissemination. After modifications, 45% found peer review to be beneficial. Conclusions: Clinical faculty are challenged to leverage their practice into teaching and scholarly activities; however, clinical faculty often need feedback to accomplish this. Although the peer review process was designed to address perceived needs of clinical faculty, the process is dynamic and needs further refinement. Overall, clinical faculty find value in a peer review process. This evaluation of peer review illustrates the challenges to provide feedback across six key areas of clinical faculty activity.   Type: Original Research

  18. Review on the Processing and Properties of Polymer Nanocomposites and Nanocoatings and Their Applications in the Packaging, Automotive and Solar Energy Fields

    Science.gov (United States)

    Müller, Kerstin; Bugnicourt, Elodie; Latorre, Marcos; Jorda, Maria; Echegoyen Sanz, Yolanda; Lagaron, José M.; Miesbauer, Oliver; Bianchin, Alvise; Hankin, Steve; Bölz, Uwe; Pérez, Germán; Jesdinszki, Marius; Lindner, Martina; Scheuerer, Zuzana; Castelló, Sara; Schmid, Markus

    2017-01-01

    For the last decades, nanocomposites materials have been widely studied in the scientific literature as they provide substantial properties enhancements, even at low nanoparticles content. Their performance depends on a number of parameters but the nanoparticles dispersion and distribution state remains the key challenge in order to obtain the full nanocomposites’ potential in terms of, e.g., flame retardance, mechanical, barrier and thermal properties, etc., that would allow extending their use in the industry. While the amount of existing research and indeed review papers regarding the formulation of nanocomposites is already significant, after listing the most common applications, this review focuses more in-depth on the properties and materials of relevance in three target sectors: packaging, solar energy and automotive. In terms of advances in the processing of nanocomposites, this review discusses various enhancement technologies such as the use of ultrasounds for in-process nanoparticles dispersion. In the case of nanocoatings, it describes the different conventionally used processes as well as nanoparticles deposition by electro-hydrodynamic processing. All in all, this review gives the basics both in terms of composition and of processing aspects to reach optimal properties for using nanocomposites in the selected applications. As an outlook, up-to-date nanosafety issues are discussed. PMID:28362331

  19. Review on the Processing and Properties of Polymer Nanocomposites and Nanocoatings and Their Applications in the Packaging, Automotive and Solar Energy Fields

    Directory of Open Access Journals (Sweden)

    Kerstin Müller

    2017-03-01

    Full Text Available For the last decades, nanocomposites materials have been widely studied in the scientific literature as they provide substantial properties enhancements, even at low nanoparticles content. Their performance depends on a number of parameters but the nanoparticles dispersion and distribution state remains the key challenge in order to obtain the full nanocomposites’ potential in terms of, e.g., flame retardance, mechanical, barrier and thermal properties, etc., that would allow extending their use in the industry. While the amount of existing research and indeed review papers regarding the formulation of nanocomposites is already significant, after listing the most common applications, this review focuses more in-depth on the properties and materials of relevance in three target sectors: packaging, solar energy and automotive. In terms of advances in the processing of nanocomposites, this review discusses various enhancement technologies such as the use of ultrasounds for in-process nanoparticles dispersion. In the case of nanocoatings, it describes the different conventionally used processes as well as nanoparticles deposition by electro-hydrodynamic processing. All in all, this review gives the basics both in terms of composition and of processing aspects to reach optimal properties for using nanocomposites in the selected applications. As an outlook, up-to-date nanosafety issues are discussed.

  20. State property tax programs promoting sustainable forests in the United States: A review of program structure and administration

    Science.gov (United States)

    Michael Kilgore; Paul Ellefson; Travis Funk; Gregory E. Frey

    2018-01-01

    Financial incentives offered by state property tax programs are a means of promoting goods and services from private forestland. Identified by a 50-state review in 2014–2015, these incentives often require adherence to several conditions including valid ownership and use of forestland, correct size of parcel and suitable forest...

  1. Processing Instruction: A review of issues

    OpenAIRE

    Muhlisin Rasuki

    2017-01-01

    This paper provides a critical review of Processing Instruction (PI). This type of instructional option was specifically designed to help second/foreign language (L2) learners grasp meaning manifested in the use of particular grammatical forms in a target language effectively through the provision of input. In this way, PI attempts to help learners develop grammatical competence in a target language in ways that foster their comprehension and production skills. The paper starts with outlining...

  2. Krsko periodic safety review project prioritization process

    International Nuclear Information System (INIS)

    Basic, I.; Vrbanic, I.; Spiler, J.; Lambright, J.

    2004-01-01

    Definition of a Krsko Periodic Safety Review (PSR) project is a comprehensive safety review of a plant after last ten years of operation. The objective is a verification by means of a comprehensive review using current methods that Krsko NPP remains safety when judged against current safety objectives and practices and that adequate arrangements are in place to maintain plant safety. This objective encompasses the three main criteria or goals: confirmation that the plant is as safe as originally intended, determination if there are any structures, systems or components that could limit the life of the plant in the foreseeable future, and comparison the plant against modern safety standards and to identify where improvements would be beneficial at justifiable cost. Krsko PSR project is structured in the three phases: Phase 1: Preparation of Detailed 10-years PSR Program, Phase 2: Performing of 10-years PSR Program and preparing of associated documents (2001-2003), and Phase 3: Implementation of the prioritized compensatory measures and modifications (development of associated EEAR, DMP, etc.) after agreement with the SNSA on the design, procedures and time-scales (2004-2008). This paper presents the NEK PSR results of work performed under Phase 2 focused on the ranking of safety issues and prioritization of corrective measures needed for establishing an efficient action plan. Safety issues were identified in Phase 2 during the following review processes: Periodic Safety Review (PSR) task; Krsko NPP Regulatory Compliance Program (RCP) review; Westinghouse Owner Group (WOG) catalog items screening/review; SNSA recommendations (including IAEA RAMP mission suggestions/recommendations).(author)

  3. Solid-State Fermentation as a Novel Paradigm for Organic Waste Valorization: A Review

    Directory of Open Access Journals (Sweden)

    Noraziah Abu Yazid

    2017-02-01

    Full Text Available The abundance of organic solid waste throughout the world has become a common issue that needs complete management at every level. Also, the scarcity of fuel and the competition between food and substance as an alternative to a petroleum-based product has become a major problem that needs to be properly handled. An urge to find renewable substances for sustainable development results in a strategy to valorize organic solid waste using solid state fermentation (SSF and to manage the issue of solid wastes in a green approach. This paper reviews management of solid wastes using SSF, with regard to its current application, advantages and challenges, downstream processing in SSF, economic viewpoint, and future perspectives.

  4. Acidic deposition: State of science and technology. Report 2. Atmospheric processes research and process model development. Final report

    International Nuclear Information System (INIS)

    Hicks, B.B.; Draxler, R.R.; Albritton, D.L.; Fehsenfeld, F.C.; Davidson, C.I.

    1990-10-01

    The document represents an attempt to put together, in one place, a summary of the present state of knowledge concerning those processes that affect air concentrations of acidic and acidifying pollutants, during their transport, from emission to deposition. It is not intended to be an all-encompassing review of the entire breadth of each of the contributing disciplines, but instead focuses on those areas where the state of science has improved over the last decade--the period of the National Acid Precipitation Assessment Program. The discussion is not limited to NAPAP activities, although it is clear that the products of NAPAP research are perhaps given greater attention than are the results obtained elsewhere. This bias is partially intentional, since it is the INTEGRATED ASSESSMENT that is currently being prepared by NAPAP that constitutes the 'client' for the material presented here. The integrated assessment pay attention to the North American situation alone, and hence the present work gives greatest attention to the North American case, but with awareness of the need to place this particular situation in the context of the rest of the world

  5. 36 CFR 294.13 - Petition process.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Petition process. 294.13... State Petitions for Inventoried Roadless Area Management § 294.13 Petition process. (a) Review and consideration of petitions made pursuant to § 294.12 shall be accomplished as follows: (1) Review. The Secretary...

  6. 7 CFR 3405.14 - Proposal review.

    Science.gov (United States)

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) COOPERATIVE STATE RESEARCH, EDUCATION, AND EXTENSION SERVICE, DEPARTMENT OF AGRICULTURE HIGHER EDUCATION CHALLENGE GRANTS PROGRAM Proposal Review and Evaluation § 3405.14 Proposal review. The proposal evaluation process includes both internal staff review and...

  7. State of health economic evaluation research in Saudi Arabia: a review.

    Science.gov (United States)

    Al-Aqeel, Sinaa A

    2012-01-01

    If evaluation of economic evidence is to be used increasingly in Saudi Arabia, a review of the published literature would be useful to inform policy decision-makers of the current state of research and plan future research agendas. The purpose of this paper is to provide a critical review of the state of health economic evaluation research within the Saudi context with regard to the number, characteristics, and quality of published articles. A literature search was conducted on May 8, 2011 to identify health economic articles pertaining to Saudi Arabia in the PubMed, Embase, and EconLit databases, using the following terms alone or in combination: "cost*", "economics", "health economics", "cost-effectiveness", "cost-benefit", "cost minimization", "cost utility analysis", and "Saudi". Reference lists of the articles identified were also searched for further articles. The tables of contents of the Saudi Pharmaceutical Journal and the Saudi Medical Journal were reviewed for the previous 5 years. The search identified 535 citations. Based on a reading of abstracts and titles, 477 papers were excluded. Upon reviewing the full text of the remaining 58 papers, 43 were excluded. Fifteen papers were included. Ten were categorized as full economic evaluations and five as partial economic evaluations. These articles were published between 1997 and 2010. The majority of the studies identified did not clearly state the perspective of their evaluation. There are many concerns about the methods used to collect outcome and costs data. Only one study used some sort of sensitivity analysis to assess the effects of uncertainty on the robustness of its conclusions. This review highlights major flaws in the design, analysis, and reporting of the identified economic analyses. Such deficiencies mean that the local economic evidence available to decision-makers is not very useful. Thus, building research capability in health economics is warranted.

  8. Initial-state interactions, factorization, and the Drell-Yan process

    International Nuclear Information System (INIS)

    Bodwin, G.T.; Brodsky, S.J.; Lepage, G.P.

    1981-12-01

    It is shown that initial state interactions violate the factorization conjecture for the Drell-Yan process order by order in perturbation theory. Also, the effects of elastic and inelastic initial state interactions on the observed cross sections are discussed

  9. A qualitative systematic review of studies using the normalization process theory to research implementation processes.

    Science.gov (United States)

    McEvoy, Rachel; Ballini, Luciana; Maltoni, Susanna; O'Donnell, Catherine A; Mair, Frances S; Macfarlane, Anne

    2014-01-02

    There is a well-recognized need for greater use of theory to address research translational gaps. Normalization Process Theory (NPT) provides a set of sociological tools to understand and explain the social processes through which new or modified practices of thinking, enacting, and organizing work are implemented, embedded, and integrated in healthcare and other organizational settings. This review of NPT offers readers the opportunity to observe how, and in what areas, a particular theoretical approach to implementation is being used. In this article we review the literature on NPT in order to understand what interventions NPT is being used to analyze, how NPT is being operationalized, and the reported benefits, if any, of using NPT. Using a framework analysis approach, we conducted a qualitative systematic review of peer-reviewed literature using NPT. We searched 12 electronic databases and all citations linked to six key NPT development papers. Grey literature/unpublished studies were not sought. Limitations of English language, healthcare setting and year of publication 2006 to June 2012 were set. Twenty-nine articles met the inclusion criteria; in the main, NPT is being applied to qualitatively analyze a diverse range of complex interventions, many beyond its original field of e-health and telehealth. The NPT constructs have high stability across settings and, notwithstanding challenges in applying NPT in terms of managing overlaps between constructs, there is evidence that it is a beneficial heuristic device to explain and guide implementation processes. NPT offers a generalizable framework that can be applied across contexts with opportunities for incremental knowledge gain over time and an explicit framework for analysis, which can explain and potentially shape implementation processes. This is the first review of NPT in use and it generates an impetus for further and extended use of NPT. We recommend that in future NPT research, authors should explicate

  10. Validity and reliability of an application review process using dedicated reviewers in one stage of a multi-stage admissions model.

    Science.gov (United States)

    Zeeman, Jacqueline M; McLaughlin, Jacqueline E; Cox, Wendy C

    2017-11-01

    With increased emphasis placed on non-academic skills in the workplace, a need exists to identify an admissions process that evaluates these skills. This study assessed the validity and reliability of an application review process involving three dedicated application reviewers in a multi-stage admissions model. A multi-stage admissions model was utilized during the 2014-2015 admissions cycle. After advancing through the academic review, each application was independently reviewed by two dedicated application reviewers utilizing a six-construct rubric (written communication, extracurricular and community service activities, leadership experience, pharmacy career appreciation, research experience, and resiliency). Rubric scores were extrapolated to a three-tier ranking to select candidates for on-site interviews. Kappa statistics were used to assess interrater reliability. A three-facet Many-Facet Rasch Model (MFRM) determined reviewer severity, candidate suitability, and rubric construct difficulty. The kappa statistic for candidates' tier rank score (n = 388 candidates) was 0.692 with a perfect agreement frequency of 84.3%. There was substantial interrater reliability between reviewers for the tier ranking (kappa: 0.654-0.710). Highest construct agreement occurred in written communication (kappa: 0.924-0.984). A three-facet MFRM analysis explained 36.9% of variance in the ratings, with 0.06% reflecting application reviewer scoring patterns (i.e., severity or leniency), 22.8% reflecting candidate suitability, and 14.1% reflecting construct difficulty. Utilization of dedicated application reviewers and a defined tiered rubric provided a valid and reliable method to effectively evaluate candidates during the application review process. These analyses provide insight into opportunities for improving the application review process among schools and colleges of pharmacy. Copyright © 2017 Elsevier Inc. All rights reserved.

  11. Process and implementation of participatory ergonomic interventions: a systematic review.

    Science.gov (United States)

    van Eerd, Dwayne; Cole, Donald; Irvin, Emma; Mahood, Quenby; Keown, Kiera; Theberge, Nancy; Village, Judy; St Vincent, Marie; Cullen, Kim

    2010-10-01

    Participatory ergonomic (PE) interventions may vary in implementation. A systematic review was done to determine the evidence regarding context, barriers and facilitators to the implementation of participatory ergonomic interventions in workplaces. In total, 17 electronic databases were searched. Data on PE process and implementation were extracted from documents meeting content and quality criteria and synthesised. The search yielded 2151 references. Of these, 190 documents were relevant and 52 met content and quality criteria. Different ergonomic teams were described in the documents as were the type, duration and content of ergonomic training. PE interventions tended to focus on physical and work process changes and report positive impacts. Resources, programme support, ergonomic training, organisational training and communication were the most often noted facilitators or barriers. Successful PE interventions require the right people to be involved, appropriate ergonomic training and clear responsibilities. Addressing key facilitators and barriers such as programme support, resources, and communication is paramount. STATEMENT OF RELEVANCE: A recent systematic review has suggested that PE has some effect on reducing symptoms, lost days of work and claims. Systematic reviews of effectiveness provide practitioners with the desire to implement but do not provide clear information about how. This article reviews the literature on process and implementation of PE.

  12. Quantum information processing with graph states

    International Nuclear Information System (INIS)

    Schlingemann, Dirk-Michael

    2005-04-01

    Graph states are multiparticle states which are associated with graphs. Each vertex of the graph corresponds to a single system or particle. The links describe quantum correlations (entanglement) between pairs of connected particles. Graph states were initiated independently by two research groups: On the one hand, graph states were introduced by Briegel and Raussendorf as a resource for a new model of one-way quantum computing, where algorithms are implemented by a sequence of measurements at single particles. On the other hand, graph states were developed by the author of this thesis and ReinhardWerner in Braunschweig, as a tool to build quantum error correcting codes, called graph codes. The connection between the two approaches was fully realized in close cooperation of both research groups. This habilitation thesis provides a survey of the theory of graph codes, focussing mainly, but not exclusively on the author's own research work. We present the theoretical and mathematical background for the analysis of graph codes. The concept of one-way quantum computing for general graph states is discussed. We explicitly show how to realize the encoding and decoding device of a graph code on a one-way quantum computer. This kind of implementation is to be seen as a mathematical description of a quantum memory device. In addition to that, we investigate interaction processes, which enable the creation of graph states on very large systems. Particular graph states can be created, for instance, by an Ising type interaction between next neighbor particles which sits at the points of an infinitely extended cubic lattice. Based on the theory of quantum cellular automata, we give a constructive characterization of general interactions which create a translationally invariant graph state. (orig.)

  13. NHDOT : process for municipally managed state aid highway program projects

    Science.gov (United States)

    2006-05-23

    The design and construction of Municipally Managed State Aid Highway Program projects must comply with the requirements in this guideline in order to receive State Aid under the applicable provisions of RSA 235. Under this process, State Aid Construc...

  14. Applying the Analytic Hierarchy Process in healthcare research: A systematic literature review and evaluation of reporting.

    Science.gov (United States)

    Schmidt, Katharina; Aumann, Ines; Hollander, Ines; Damm, Kathrin; von der Schulenburg, J-Matthias Graf

    2015-12-24

    The Analytic Hierarchy Process (AHP), developed by Saaty in the late 1970s, is one of the methods for multi-criteria decision making. The AHP disaggregates a complex decision problem into different hierarchical levels. The weight for each criterion and alternative are judged in pairwise comparisons and priorities are calculated by the Eigenvector method. The slowly increasing application of the AHP was the motivation for this study to explore the current state of its methodology in the healthcare context. A systematic literature review was conducted by searching the Pubmed and Web of Science databases for articles with the following keywords in their titles or abstracts: "Analytic Hierarchy Process," "Analytical Hierarchy Process," "multi-criteria decision analysis," "multiple criteria decision," "stated preference," and "pairwise comparison." In addition, we developed reporting criteria to indicate whether the authors reported important aspects and evaluated the resulting studies' reporting. The systematic review resulted in 121 articles. The number of studies applying AHP has increased since 2005. Most studies were from Asia (almost 30%), followed by the US (25.6%). On average, the studies used 19.64 criteria throughout their hierarchical levels. Furthermore, we restricted a detailed analysis to those articles published within the last 5 years (n = 69). The mean of participants in these studies were 109, whereas we identified major differences in how the surveys were conducted. The evaluation of reporting showed that the mean of reported elements was about 6.75 out of 10. Thus, 12 out of 69 studies reported less than half of the criteria. The AHP has been applied inconsistently in healthcare research. A minority of studies described all the relevant aspects. Thus, the statements in this review may be biased, as they are restricted to the information available in the papers. Hence, further research is required to discover who should be interviewed and how, how

  15. Industrial water treatment with heavy metals through zeolites and bioremediation systems with aquatic plants especially Eichhornia crassipes. State of art review

    OpenAIRE

    Uriel Fernando Carreño-Sayago

    2014-01-01

    In this review we explore different opportunities to use a cheap natural material for removing and retention of heavy metals from polluted waters by waste of different processes. Two research systems will be addressed: the first through a material known as zeolite or more generally porous  luminosilicates, which may be synthesized or extracted from the mines of clays and minerals, being used in its natural state or after modification processes and doping. The other mechanism is bioremediation...

  16. 40 CFR 123.30 - Judicial review of approval or denial of permits.

    Science.gov (United States)

    2010-07-01

    ... permitting process. A State will meet this standard if State law allows an opportunity for judicial review... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Judicial review of approval or denial... (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS State Program Submissions § 123.30 Judicial review of...

  17. Soil-transmitted Helminthiasis in the United States: a systematic review--1940-2010.

    Science.gov (United States)

    Starr, Michelle C; Montgomery, Susan P

    2011-10-01

    The epidemiology of soil-transmitted helminth infections (hookworm, Trichuris trichiura, Ascaris lumbricoides, and Strongyloides stercoralis) in the United States is poorly understood. To gain understanding of the status of disease, a systematic review was performed to assess the prevalence of soil-transmitted helminth infections in the United States. Of all studies reviewed, 14 were designated as high-quality. High-quality studies were published from 1942 to 1982 and showed that infection was prevalent throughout the southern United States and Appalachia as recently as 1982, finding that hookworm (19.6%), T. trichiura (55.2%), A. lumbricoides (49.4%), and S. stercoralis (3.8%) affected significant percentages of the population. However, because the most recent high-quality studies were published over 25 years ago, the literature does not provide sufficient data to assess current endemic transmission. Because the status of disease remains unclear, there is a need for additional studies to determine if soil-transmitted helminths remain endemic in the United States.

  18. A review and integration of socio-political processes in marketing channel relationships

    DEFF Research Database (Denmark)

    Jensen, Nils Bøgelund; Skytte, Hans

    , and all issues from 1980 until the summer of 1996 were systematically examined for empirical contributions to understanding marketing channel relationships. This, and some further articles, which turned up by reviewing references in the articles, resulted in a total of 92 papers on the subject. This paper......, influence strategies, adaptation, trust and commitment are seen as important aspects of marketing channel relationships. 3. The review is split into two sections. One, which focuses on the behavioural processes and one which focuses on the sentiment processes. For each category the relevant empirical papers......1. The objective of the paper is to review the empirical contributions to understanding socio-political processes in marketing channels. The results of the study will be used as a starting point for our own studies. Nine leading international journals were used to review the empirical evidence...

  19. Autoionizing process of double rydberg states in atom

    International Nuclear Information System (INIS)

    Xu, X. Y.; Huang, W.; Xu, C. B.; Xue, P.; Chen, D. Y.

    1997-01-01

    We have studied the autoionization distribution of penetrating double Rydberg (DR) states NLnl(N< n;L,l<4) experimentally in calcium by using five-laser resonance excitation and sequential ionization with a pulsed and a strong constant electric field, as well as theoretically in helium by using the hyperspherical close-coupling method. We have found the DR states autoionize with the ejected electron having its average kinetic energy nearly independent of n but apparently related to the binding energy of the ionic Rydberg orbit NL. We have also discussed the dynamics in DR states and described two types of autoionizing processes, i.e., 'penetration autoionization' and 'polarization autoionization' in DR states

  20. A Review on Parametric Analysis of Magnetic Abrasive Machining Process

    Science.gov (United States)

    Khattri, Krishna; Choudhary, Gulshan; Bhuyan, B. K.; Selokar, Ashish

    2018-03-01

    The magnetic abrasive machining (MAM) process is a highly developed unconventional machining process. It is frequently used in manufacturing industries for nanometer range surface finishing of workpiece with the help of Magnetic abrasive particles (MAPs) and magnetic force applied in the machining zone. It is precise and faster than conventional methods and able to produce defect free finished components. This paper provides a comprehensive review on the recent advancement of MAM process carried out by different researcher till date. The effect of different input parameters such as rotational speed of electromagnet, voltage, magnetic flux density, abrasive particles size and working gap on the performances of Material Removal Rate (MRR) and surface roughness (Ra) have been discussed. On the basis of review, it is observed that the rotational speed of electromagnet, voltage and mesh size of abrasive particles have significant impact on MAM process.

  1. Modeling of state recognition process of plant operator

    International Nuclear Information System (INIS)

    Hatakeyama, Naoki; Furuta, Kazuo

    2000-01-01

    It is necessary to automate Machine systems because they have become larger and more complicated these years. Generally speaking, humans hardly grasp the overall state in the automated systems. In fact it is reported that the accident caused by this problem occurs. To avoid such accidents, there were many studies to give human the authority of final decision making. In general it depends on circumstances whether the authority of decision making is given humans or machine systems. It is supposed therefore that humans and machine systems exchange their information each other and efficiently share their tasks. It is necessary that machine systems infer human intention in these systems. There were not enough considerations on state recognition process which is important to infer human intention. In this paper we first reconstructed human knowledge into a hierarchy and incorporated these knowledge into a Bayesian network. Next we modeled the state recognition process by using the Bayesian network. (author)

  2. Industrial water treatment with heavy metals through zeolites and bioremediation systems with aquatic plants especially Eichhornia crassipes. State of art review

    Directory of Open Access Journals (Sweden)

    Uriel Fernando Carreño-Sayago

    2014-12-01

    Full Text Available In this review we explore different opportunities to use a cheap natural material for removing and retention of heavy metals from polluted waters by waste of different processes. Two research systems will be addressed: the first through a material known as zeolite or more generally porous  luminosilicates, which may be synthesized or extracted from the mines of clays and minerals, being used in its natural state or after modification processes and doping. The other mechanism is bioremediation through algae, some bacteria and especially aquatic plants such as Eichhornia crassipes (water hyacinth. We will evaluate the viability of joining these two types complementing each other. Investigations into the feasibility of Eichhornia crassipes (water hyacinth as feedstock for biofuels are also reviewed.

  3. 32 CFR 516.10 - Service of civil process within the United States.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Service of civil process within the United States... CIVIL AUTHORITIES AND PUBLIC RELATIONS LITIGATION Service of Process § 516.10 Service of civil process within the United States. (a) Policy. DA officials will not prevent or evade the service or process in...

  4. The perception of odor objects in everyday life: a review on the processing of odor mixtures

    Directory of Open Access Journals (Sweden)

    Thierry eThomas-Danguin

    2014-06-01

    Full Text Available Smelling monomolecular odors hardly ever occurs in everyday life, and the daily functioning of the sense of smell relies primarily on the processing of complex mixtures of volatiles that are present in the environment (e.g., emanating from food or conspecifics. Such processing allows for the instantaneous recognition and categorization of smells and also for the discrimination of odors among others to extract relevant information and to adapt efficiently in different contexts. The neurophysiological mechanisms underpinning this highly efficient analysis of complex mixtures of odorants is beginning to be unraveled and support the idea that olfaction, as vision and audition, relies on odor-objects encoding. This configural processing of odor mixtures, which is empirically subject to important applications in our societies (e.g., the art of perfumers, flavorists, and wine makers, has been scientifically studied only during the last decades. This processing depends on many individual factors, among which are the developmental stage, lifestyle, physiological and mood state, and cognitive skills; this processing also presents striking similarities between species. The present review gathers the recent findings, as observed in animals, healthy subjects, and/or individuals with affective disorders, supporting the perception of complex odor stimuli as odor objects. It also discusses peripheral to central processing, and cognitive and behavioral significance. Finally, this review highlights that the study of odor mixtures is an original window allowing for the investigation of daily olfaction and emphasizes the need for knowledge about the underlying biological processes, which appear to be crucial for our representation and adaptation to the chemical environment.

  5. Current and future state of FDA-CMS parallel reviews.

    Science.gov (United States)

    Messner, D A; Tunis, S R

    2012-03-01

    The US Food and Drug Administration (FDA) and the Centers for Medicare and Medicaid Services (CMS) recently proposed a partial alignment of their respective review processes for new medical products. The proposed "parallel review" not only offers an opportunity for some products to reach the market with Medicare coverage more quickly but may also create new incentives for product developers to conduct studies designed to address simultaneously the information needs of regulators, payers, patients, and clinicians.

  6. The systematic review as a research process in music therapy.

    Science.gov (United States)

    Hanson-Abromeit, Deanna; Sena Moore, Kimberly

    2014-01-01

    Music therapists are challenged to present evidence on the efficacy of music therapy treatment and incorporate the best available research evidence to make informed healthcare and treatment decisions. Higher standards of evidence can come from a variety of sources including systematic reviews. To define and describe a range of research review methods using examples from music therapy and related literature, with emphasis on the systematic review. In addition, the authors provide a detailed overview of methodological processes for conducting and reporting systematic reviews in music therapy. The systematic review process is described in five steps. Step 1 identifies the research plan and operationalized research question(s). Step 2 illustrates the identification and organization of the existing literature related to the question(s). Step 3 details coding of data extracted from the literature. Step 4 explains the synthesis of coded findings and analysis to answer the research question(s). Step 5 describes the strength of evidence evaluation and results presentation for practice recommendations. Music therapists are encouraged to develop and conduct systematic reviews. This methodology contributes to review outcome credibility and can determine how information is interpreted and used by clinicians, clients or patients, and policy makers. A systematic review is a methodologically rigorous research method used to organize and evaluate extant literature related to a clinical problem. Systematic reviews can assist music therapists in managing the ever-increasing literature, making well-informed evidence based practice and research decisions, and translating existing music-based and nonmusic based literature to clinical practice and research development. © the American Music Therapy Association 2014. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  7. An Analytical Review of the United States National Interests in Korea

    National Research Council Canada - National Science Library

    Swope, Frederick

    2004-01-01

    ... and interests for continued security on the peninsula and in the region. It will address these new growing tensions and review the United States National interests and policy differences with South Korea...

  8. Neurocognitive Processes and Pediatric Obesity Interventions: Review of Current Literature and Suggested Future Directions.

    Science.gov (United States)

    Miller, Alison L

    2016-06-01

    Childhood obesity is a significant problem in the United States, but current childhood obesity prevention approaches have limited efficacy. Self-regulation processes organize behavior to achieve a goal and may shape health behaviors and health outcomes. Obesity prevention approaches that focus on the cognitive and behavioral mechanisms that underlie self-regulation early in life may therefore lead to better outcomes. This article reviews the development of executive functioning (EF), identifies influences on EF development, discusses aspects of EF relating to increased risk for childhood obesity, and considers how EF-weight associations may change across development. Implications for intervention are discussed. Copyright © 2016 Elsevier Inc. All rights reserved.

  9. Controlling Business Object States in Business Process Models to Support Compliance

    OpenAIRE

    Peņicina, L

    2016-01-01

    The doctoral thesis addresses the existing gap between business process models and states of business objects. Existing modelling methods such as BPMN and ArchiMate lack an explicitly declarative approach for capturing states of business objects and laws of state transitions. This gap hinders the compliance of business process models with regulations imposed internally or externally, and can result in potential legal problems for organizations. Also this g...

  10. 76 FR 7623 - Department of State Performance Review Board Members

    Science.gov (United States)

    2011-02-10

    ...: February 2, 2011. Nancy J. Powell, Director General of the Foreign Service and Director of Human Resources... following individuals to the Department of State Performance Review Board for Non-Career Senior Executive Service members: Jeanne-Marie Smith, Chairperson, Senior Advisor, Deputy Secretary for Management and...

  11. PERMITTING LEADERSHIP IN THE UNITED STATES

    International Nuclear Information System (INIS)

    Ken Nemeth

    2002-01-01

    In accordance with the Southern States Energy Board (SSEB) proposal, as incorporated into NETL/DE-FC26-97FT34199, the objective of this agreement is to streamline the environmental technology permitting process site-to-site, state-to-state, and industry-to-industry to achieve remediation and waste processing faster, better and cheaper. SSEB is working with member Governors, legislators and regulators to build consensus on streamlining the permitting process for new and innovative technologies for addressing the legacy of environmental problems from 50 years of weapons research, development and production. This report reviews mechanisms whereby industry consortiums and the Department of Energy (DOE) have been working with State regulators and other officials in technology deployment decisions within the DOE complex. The historic development of relationships with State regulators is reviewed and the current nature of the relationships examined. The report contains observations from internal DOE reviews as well as recommendations from the General Accounting Office (GAO) and other external organizations. The report discusses reorganization initiatives leading up to a DOE Top-to-Bottom review of the Environmental Management (EM) Program and highlights points of consideration for maintaining effective linkages with State regulators. It notes how the proposed changes will place new demands upon the National Energy Technology Laboratory (NETL) and how NETL can leverage its resources by refocusing existing EM efforts specifically to states that have DOE facilities within their borders (host-states). Finally, the report discusses how SSEB's Permitting Leadership in the United States (PLUS) program can provide the foundation for elements of NETL's technical assistance program that are delivered to regulators and other decision- makers in host-states. As a regional compact commission, SSEB provides important direct linkages to regulators and stakeholders who need technical

  12. On the Need for Quantitative Bias Analysis in the Peer-Review Process.

    Science.gov (United States)

    Fox, Matthew P; Lash, Timothy L

    2017-05-15

    Peer review is central to the process through which epidemiologists generate evidence to inform public health and medical interventions. Reviewers thereby act as critical gatekeepers to high-quality research. They are asked to carefully consider the validity of the proposed work or research findings by paying careful attention to the methodology and critiquing the importance of the insight gained. However, although many have noted problems with the peer-review system for both manuscripts and grant submissions, few solutions have been proposed to improve the process. Quantitative bias analysis encompasses all methods used to quantify the impact of systematic error on estimates of effect in epidemiologic research. Reviewers who insist that quantitative bias analysis be incorporated into the design, conduct, presentation, and interpretation of epidemiologic research could substantially strengthen the process. In the present commentary, we demonstrate how quantitative bias analysis can be used by investigators and authors, reviewers, funding agencies, and editors. By utilizing quantitative bias analysis in the peer-review process, editors can potentially avoid unnecessary rejections, identify key areas for improvement, and improve discussion sections by shifting from speculation on the impact of sources of error to quantification of the impact those sources of bias may have had. © The Author 2017. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  13. Revitalizing REDD+ Policy Processes in Vietnam: The Roles of State and Non-State Actors

    Directory of Open Access Journals (Sweden)

    Thu Ba Huynh

    2017-02-01

    Full Text Available Vietnam was one of the first countries to introduce the National REDD+ (Reduced Emissions from Deforestation and Forest Degradation Action Program in 2012. The country has recently revised the Program to aim for a more inclusive 2016–2020 strategy and a vision to 2030. This study explores how Vietnam policy actors view REDD+ policy development and their influence in these processes. The results can contribute to the discussion on how policy actors can effectively influence policy processes in the evolving context of REDD+ and in the types of political arrangements represented in Vietnam. We examined the influence of state and non-state actors on the 2012 National REDD+ Action Program (NRAP processes, and explored factors that may have shaped this influence, using a combination of document analysis and semi-structured interviews with 81 policy actors. It was found that non-state actors in REDD+ are still on the periphery of decision making, occupying “safe” positions, and have not taken either full advantage of their capacities, or of recent significant changes in the contemporary policy environment, to exert stronger influence on policy. We suggest that REDD+ policy processes in Vietnam need to be revitalized with key actors engaging collectively to promote the possibilities of REDD+ within a broader view of social change that reaches beyond the forestry sector.

  14. Pharmacoeconomic evaluation in Ireland: A review of the process

    LENUS (Irish Health Repository)

    Tilson, Lesley

    2010-01-01

    The aim of this review is to describe the pharmacoeconomic assessment process in Ireland and to provide examples of recent appraisals and the subsequent impact on pricing and reimbursement decisions.\\r\

  15. Multiphoton quantum optics and quantum state engineering

    International Nuclear Information System (INIS)

    Dell'Anno, Fabio; De Siena, Silvio; Illuminati, Fabrizio

    2006-01-01

    We present a review of theoretical and experimental aspects of multiphoton quantum optics. Multiphoton processes occur and are important for many aspects of matter-radiation interactions that include the efficient ionization of atoms and molecules, and, more generally, atomic transition mechanisms; system-environment couplings and dissipative quantum dynamics; laser physics, optical parametric processes, and interferometry. A single review cannot account for all aspects of such an enormously vast subject. Here we choose to concentrate our attention on parametric processes in nonlinear media, with special emphasis on the engineering of nonclassical states of photons and atoms that are relevant for the conceptual investigations as well as for the practical applications of forefront aspects of modern quantum mechanics. We present a detailed analysis of the methods and techniques for the production of genuinely quantum multiphoton processes in nonlinear media, and the corresponding models of multiphoton effective interactions. We review existing proposals for the classification, engineering, and manipulation of nonclassical states, including Fock states, macroscopic superposition states, and multiphoton generalized coherent states. We introduce and discuss the structure of canonical multiphoton quantum optics and the associated one- and two-mode canonical multiphoton squeezed states. This framework provides a consistent multiphoton generalization of two-photon quantum optics and a consistent Hamiltonian description of multiphoton processes associated to higher-order nonlinearities. Finally, we discuss very recent advances that by combining linear and nonlinear optical devices allow to realize multiphoton entangled states of the electromagnetic field, either in discrete or in continuous variables, that are relevant for applications to efficient quantum computation, quantum teleportation, and related problems in quantum communication and information

  16. Multiphoton quantum optics and quantum state engineering

    Energy Technology Data Exchange (ETDEWEB)

    Dell' Anno, Fabio [Dipartimento di Fisica ' E. R. Caianiello' , Universita degli Studi di Salerno, CNISM and CNR-INFM Coherentia, and INFN Sezione di Napoli, Gruppo Collegato di Salerno, Via S. Allende, I-84081 Baronissi (Saudi Arabia) (Italy)]. E-mail: dellanno@sa.infn.it; De Siena, Silvio [Dipartimento di Fisica ' E. R. Caianiello' , Universita degli Studi di Salerno, CNISM and CNR-INFM Coherentia, and INFN Sezione di Napoli, Gruppo Collegato di Salerno, Via S. Allende, I-84081 Baronissi (SA) (Italy)]. E-mail: desiena@sa.infn.it; Illuminati, Fabrizio [Dipartimento di Fisica ' E. R. Caianiello' , Universita degli Studi di Salerno, CNISM and CNR-INFM Coherentia, and INFN Sezione di Napoli, Gruppo Collegato di Salerno, Via S. Allende, I-84081 Baronissi (SA) (Italy)]. E-mail: illuminati@sa.infn.it

    2006-05-15

    We present a review of theoretical and experimental aspects of multiphoton quantum optics. Multiphoton processes occur and are important for many aspects of matter-radiation interactions that include the efficient ionization of atoms and molecules, and, more generally, atomic transition mechanisms; system-environment couplings and dissipative quantum dynamics; laser physics, optical parametric processes, and interferometry. A single review cannot account for all aspects of such an enormously vast subject. Here we choose to concentrate our attention on parametric processes in nonlinear media, with special emphasis on the engineering of nonclassical states of photons and atoms that are relevant for the conceptual investigations as well as for the practical applications of forefront aspects of modern quantum mechanics. We present a detailed analysis of the methods and techniques for the production of genuinely quantum multiphoton processes in nonlinear media, and the corresponding models of multiphoton effective interactions. We review existing proposals for the classification, engineering, and manipulation of nonclassical states, including Fock states, macroscopic superposition states, and multiphoton generalized coherent states. We introduce and discuss the structure of canonical multiphoton quantum optics and the associated one- and two-mode canonical multiphoton squeezed states. This framework provides a consistent multiphoton generalization of two-photon quantum optics and a consistent Hamiltonian description of multiphoton processes associated to higher-order nonlinearities. Finally, we discuss very recent advances that by combining linear and nonlinear optical devices allow to realize multiphoton entangled states of the electromagnetic field, either in discrete or in continuous variables, that are relevant for applications to efficient quantum computation, quantum teleportation, and related problems in quantum communication and information.

  17. Monitoring of polymer melt processing

    International Nuclear Information System (INIS)

    Alig, Ingo; Steinhoff, Bernd; Lellinger, Dirk

    2010-01-01

    The paper reviews the state-of-the-art of in-line and on-line monitoring during polymer melt processing by compounding, extrusion and injection moulding. Different spectroscopic and scattering techniques as well as conductivity and viscosity measurements are reviewed and compared concerning their potential for different process applications. In addition to information on chemical composition and state of the process, the in situ detection of morphology, which is of specific interest for multiphase polymer systems such as polymer composites and polymer blends, is described in detail. For these systems, the product properties strongly depend on the phase or filler morphology created during processing. Examples for optical (UV/vis, NIR) and ultrasonic attenuation spectra recorded during extrusion are given, which were found to be sensitive to the chemical composition as well as to size and degree of dispersion of micro or nanofillers in the polymer matrix. By small-angle light scattering experiments, process-induced structures were detected in blends of incompatible polymers during compounding. Using conductivity measurements during extrusion, the influence of processing conditions on the electrical conductivity of polymer melts with conductive fillers (carbon black or carbon nanotubes) was monitored. (topical review)

  18. Fundamental mechanisms and reactions in non-catalytic subcritical hydrothermal processes: A review.

    Science.gov (United States)

    Yousefifar, Azadeh; Baroutian, Saeid; Farid, Mohammed M; Gapes, Daniel J; Young, Brent R

    2017-10-15

    The management and disposal of solid waste is of increasing concern across the globe. Hydrothermal processing of sludge has been suggested as a promising solution to deal with the considerable amounts of sludge produced worldwide. Such a process not only degrades organic compounds and reduces waste volume, but also provides an opportunity to recover valuable substances. Hydrothermal processing comprises two main sub-processes: wet oxidation (WO) and thermal hydrolysis (TH), in which the formation of various free radicals results in the production of different intermediates. Volatile fatty acids (VFAs), especially acetic acid, are usually the main intermediates which remain as a by-product of the process. This paper aims to review the fundamental mechanism for hydrothermal processing of sludge, and the formation of different free radicals and intermediates therein. In addition, the proposed kinetic models for the two processes (WO and TH) from the literature are reviewed and the advantages and disadvantages of each model are outlined. The effect of mass transfer as a critical component of the design and development of the processes, which has been neglected in most of these proposed models, is also reviewed, and the effect of influencing parameters on the processes' controlling step (reaction or mass transfer) is discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. year Review of Patients on DOTS in Delta State, Nigeria

    African Journals Online (AJOL)

    UNIBEN

    1Department of Community Medicine, Delta State University Teaching ... Therapy Short-course (DOTS), DOTS plus, and the Stop TB Strategy. ... Methods: In this descriptive records review of years 2011-2015, existing data ... Treatment success rate improved from 68.3% in ..... exploration and social interventions to curb it.

  20. Process to produce excited states of atomic nuclei

    International Nuclear Information System (INIS)

    Morita, M.; Morita, R.

    The claims of a patented process which relates to the production of excited states of atomic nuclei are outlined. Among these are (1) production of nuclear excited states by bombarding the atoms with x rays or electrons under given conditions, (2) production of radioactive substances by nuclear excitation with x rays or electrons, (3) separation of specific isotopes from a mixture of isotopes of the same element by means of nuclear excitation followed by chemical treatment. The invention allows production of excited states of atomic nuclei in a relatively simple manner without the need of large apparatus and equipment

  1. Role of interference of states of intermediate nuclei in exchange processes

    International Nuclear Information System (INIS)

    Belyaeva, T.L.; Zelenskaya, N.S.; Teplov, I.B.

    1982-01-01

    Role of interference of intermediate nucleus states for exchange processes in reactions with alpha particles on 11 B, 7 Li and 6 Li light nuclei was investigated when considering exactly the process dynamics in the method of distorted waves with a finite interaction radius. The process dynamics, in particular, the overlapping degree of wave functions of bound states and interaction potentials, affects considerably the reaction cross section in the rections with alpha particles on nuclei of 1p shell. If in the reaction selection rules permit the excitation of components of intermediate system states with maximum values of #betta# 1 and #betta# 2 orbital moments at the given N 1 and N 2 , the contribution of such components to the cross section will be determining. When components of intermediate system states with maximum #betta# 1 (or #betta# 2 ) are forbidden with selection rules, several intermediate states can have approximately similar overlapping integrals

  2. Greenhouse mechanization: State of the art and future perspective

    NARCIS (Netherlands)

    Henten, van E.

    2006-01-01

    This paper reviews the state of the art and future perspective of greenhouse mechanization. Driving forces for mechanization are identified. Dutch greenhouse crop production is used as an example. Analysis of a generic crop production process combined with a review of the state of the art in

  3. A systematic review of yoga for state anxiety: considerations for occupational therapy.

    Science.gov (United States)

    Chugh-Gupta, Neha; Baldassarre, Fulvia G; Vrkljan, Brenda H

    2013-06-01

    State anxiety can result from a variety of life situations. This type of anxiety can disrupt occupational engagement and performance, thereby affecting rehabilitation and recovery. Occupational therapists need to address the connection between mind-body-spirit and its relationship to performance and engagement in meaningful occupations. Yoga, when used as an adjunct to therapy, has the potential to address state anxiety. The aim was to systematically review the evidence concerning the effectiveness of yoga as a treatment approach for state anxiety. Six electronic databases, the authors' own files, and the references of included studies from 1990 to July 2011 were searched. A total of 25 unique studies represented by 26 publications made up the sample: two systematic reviews; 16 randomized controlled trials, and seven prospective, controlled, non-randomized studies. Evidence suggests yoga can be a viable therapeutic option for reducing state anxiety in certain situations. In making the determination to recommend yoga as an intervention, occupational therapists should consider the client's circumstances and values as well as the type and intensity of the yoga program.

  4. PRISM, Processing and Review Interface for Strong Motion Data Software

    Science.gov (United States)

    Kalkan, E.; Jones, J. M.; Stephens, C. D.; Ng, P.

    2016-12-01

    A continually increasing number of high-quality digital strong-motion records from stations of the National Strong Motion Project (NSMP) of the U.S. Geological Survey (USGS), as well as data from regional seismic networks within the U.S., calls for automated processing of strong-motion records with human review limited to selected significant or flagged records. The NSMP has developed the Processing and Review Interface for Strong Motion data (PRISM) software to meet this need. PRISM automates the processing of strong-motion records by providing batch-processing capabilities. The PRISM software is platform-independent (coded in Java), open-source, and does not depend on any closed-source or proprietary software. The software consists of two major components: a record processing engine composed of modules for each processing step, and a graphical user interface (GUI) for manual review and processing. To facilitate the use by non-NSMP earthquake engineers and scientists, PRISM (both its processing engine and GUI components) is easy to install and run as a stand-alone system on common operating systems such as Linux, OS X and Windows. PRISM was designed to be flexible and extensible in order to accommodate implementation of new processing techniques. Input to PRISM currently is limited to data files in the Consortium of Organizations for Strong-Motion Observation Systems (COSMOS) V0 format, so that all retrieved acceleration time series need to be converted to this format. Output products include COSMOS V1, V2 and V3 files as: (i) raw acceleration time series in physical units with mean removed (V1), (ii) baseline-corrected and filtered acceleration, velocity, and displacement time series (V2), and (iii) response spectra, Fourier amplitude spectra and common earthquake-engineering intensity measures (V3). A thorough description of the record processing features supported by PRISM is presented with examples and validation results. All computing features have been

  5. Information fusion in aquaculture: a state-of the art review

    Directory of Open Access Journals (Sweden)

    Shahbaz Gul HASSAN,Murtaza HASAN,Daoliang LI

    2016-09-01

    Full Text Available Efficient fish feeding is currently one of biggest challenges in aquaculture to enhance the production of fish quality and quantity. In this review, an information fusion approach was used to integrate multi-sensor and computer vision techniques to make fish feeding more efficient and accurate. Information fusion is a well-known technology that has been used in different fields of artificial intelligence, robotics, image processing, computer vision, sensors and wireless sensor networks. Information fusion in aquaculture is a growing field of research that is used to enhance the performance of an industrialized ecosystem. This review study surveys different fish feeding systems using multi-sensor data fusion, computer vision technology, and different food intake models. In addition, different fish behavior monitoring techniques are discussed, and the parameters of water, pH, dissolved oxygen, turbidity, temperature etc., necessary for the fish feeding process, are examined. Moreover, the different waste management and fish disease diagnosis techniques using different technologies, expert systems and modeling are also reviewed.

  6. Prior knowledge processing for initial state of Kalman filter

    Czech Academy of Sciences Publication Activity Database

    Suzdaleva, Evgenia

    2010-01-01

    Roč. 24, č. 3 (2010), s. 188-202 ISSN 0890-6327 R&D Projects: GA ČR(CZ) GP201/06/P434 Institutional research plan: CEZ:AV0Z10750506 Keywords : Kalman filtering * prior knowledge * state-space model * initial state distribution Subject RIV: BC - Control Systems Theory Impact factor: 0.729, year: 2010 http://library.utia.cas.cz/separaty/2009/AS/suzdaleva-prior knowledge processing for initial state of kalman filter.pdf

  7. Electronic Timekeeping: North Dakota State University Improves Payroll Processing.

    Science.gov (United States)

    Vetter, Ronald J.; And Others

    1993-01-01

    North Dakota State University has adopted automated timekeeping to improve the efficiency and effectiveness of payroll processing. The microcomputer-based system accurately records and computes employee time, tracks labor distribution, accommodates complex labor policies and company pay practices, provides automatic data processing and reporting,…

  8. 15 CFR 971.427 - Processing outside the United States.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Processing outside the United States... THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS Issuance/Transfer: Terms, Conditions and Restrictions Terms, Conditions and Restrictions § 971.427 Processing...

  9. State of Diabetes Care in Nigeria: A Review | Chinenye | Nigerian ...

    African Journals Online (AJOL)

    Objective(s): The objective of this discourse is to review the state of diabetes care in Nigeria with focus on the needs, priorities and recommendations, which should guide our clinicians. It will discuss the definition, pattern, landmark Nigerian studies on diabetes care, matters arising, morbidity/mortality and proposed ...

  10. All-optical quantum computing with a hybrid solid-state processing unit

    International Nuclear Information System (INIS)

    Pei Pei; Zhang Fengyang; Li Chong; Song Heshan

    2011-01-01

    We develop an architecture of a hybrid quantum solid-state processing unit for universal quantum computing. The architecture allows distant and nonidentical solid-state qubits in distinct physical systems to interact and work collaboratively. All the quantum computing procedures are controlled by optical methods using classical fields and cavity QED. Our methods have a prominent advantage of the insensitivity to dissipation process benefiting from the virtual excitation of subsystems. Moreover, the quantum nondemolition measurements and state transfer for the solid-state qubits are proposed. The architecture opens promising perspectives for implementing scalable quantum computation in a broader sense that different solid-state systems can merge and be integrated into one quantum processor afterward.

  11. Strategic Review Process for an Accountable Care Organization and Emerging Accountable Care Best Practices.

    Science.gov (United States)

    Conway, Sarah J; Himmelrich, Sarah; Feeser, Scott A; Flynn, John A; Kravet, Steven J; Bailey, Jennifer; Hebert, Lindsay C; Donovan, Susan H; Kachur, Sarah G; Brown, Patricia M C; Baumgartner, William A; Berkowitz, Scott A

    2018-02-02

    Accountable Care Organizations (ACOs), like other care entities, must be strategic about which initiatives they support in the quest for higher value. This article reviews the current strategic planning process for the Johns Hopkins Medicine Alliance for Patients (JMAP), a Medicare Shared Savings Program Track 1 ACO. It reviews the 3 focus areas for the 2017 strategic review process - (1) optimizing care coordination for complex, at-risk patients, (2) post-acute care, and (3) specialty care integration - reviewing cost savings and quality improvement opportunities, associated best practices from the literature, and opportunities to leverage and advance existing ACO and health system efforts in each area. It then reviews the ultimate selection of priorities for the coming year and early thoughts on implementation. After the robust review process, key stakeholders voted to select interventions targeted at care coordination, post-acute care, and specialty integration including Part B drug and imaging costs. The interventions selected incorporate a mixture of enhancing current ACO initiatives, working collaboratively and synergistically on other health system initiatives, and taking on new projects deemed targeted, cost-effective, and manageable in scope. The annual strategic review has been an essential and iterative process based on performance data and informed by the collective experience of other organizations. The process allows for an evidence-based strategic plan for the ACO in pursuit of the best care for patients.

  12. A review of observations of organic matter in fogs and clouds: Origin, processing and fate

    Science.gov (United States)

    Herckes, Pierre; Valsaraj, Kalliat T.; Collett, Jeffrey L.

    2013-10-01

    While fog and cloud composition has been studied for decades, most of the research was limited to inorganic species and fog acidity. Recently the focus has shifted towards organic matter in the atmospheric aqueous phase of fogs and clouds: its origin, reactivity and fate. An impressive number of fog and cloud chemistry observational studies have been performed over the last decade throughout the world. In the present work we will review the state of knowledge of atmospheric organic matter processing by fogs, with a focus on field observations. We start by reviewing observational studies in general and then discuss our knowledge on the occurrence of organic matter in fogs, its solubility, characterization and molecular speciation. Organic carbon concentrations can vary widely from approximately 1 mg C/L in remote marine environments to more than 100 mg C/L in polluted radiation fogs, accounting for a substantial part of fogwater solutes. The carbonaceous material can enter the droplets from the gas and particle phase and the scavenging behavior of fogs will be detailed. Observational studies showed evidence of aqueous phase transformation of organic material, in particular secondary organic aerosol (SOA) generation, in fog. Recent observations of biological material in fog suggest also an impact of biological processing within the droplets on fog organic matter. The review will end with a discussion of the impact of fog on the deposition fluxes of organic material and hence its atmospheric lifetime.

  13. Improving regulatory effectiveness in Federal/State siting actions. Need for power: determinants in the state decisionmaking processes. Final report

    International Nuclear Information System (INIS)

    Noble, J.B.; Hemphill, J.B.

    1978-03-01

    The Department of Energy's Nuclear Siting and Licensing Act of 1978 (S. 2775; H. R. 11704) proposes Federal/State coordination in need for facility decisionmaking for nuclear power stations. The present study examines the decisionmaking criteria used by forty-four States in making a determination of need for power/facility. Specific criteria are identified along with the number of States which make those criteria a primary or a secondary consideration in determining need for facility. Individual profiles of the studied States' decisionmaking criteria are provided. In addition, the study examines the different organizational and functional patterns found in the States' regulatory process to certificate power stations. The coordination or lack of coordination of the issuance of associated environmental permits required for power stations is outlined for each State. Information concerning States' rate treatment of expenses associated with the construction and operation of a power station is provided. The relationship between the need for power decisionmaking process and the ratemaking process is explored

  14. The effects of pre-processing strategies in sentiment analysis of online movie reviews

    Science.gov (United States)

    Zin, Harnani Mat; Mustapha, Norwati; Murad, Masrah Azrifah Azmi; Sharef, Nurfadhlina Mohd

    2017-10-01

    With the ever increasing of internet applications and social networking sites, people nowadays can easily express their feelings towards any products and services. These online reviews act as an important source for further analysis and improved decision making. These reviews are mostly unstructured by nature and thus, need processing like sentiment analysis and classification to provide a meaningful information for future uses. In text analysis tasks, the appropriate selection of words/features will have a huge impact on the effectiveness of the classifier. Thus, this paper explores the effect of the pre-processing strategies in the sentiment analysis of online movie reviews. In this paper, supervised machine learning method was used to classify the reviews. The support vector machine (SVM) with linear and non-linear kernel has been considered as classifier for the classification of the reviews. The performance of the classifier is critically examined based on the results of precision, recall, f-measure, and accuracy. Two different features representations were used which are term frequency and term frequency-inverse document frequency. Results show that the pre-processing strategies give a significant impact on the classification process.

  15. Insights from the panel review process

    International Nuclear Information System (INIS)

    Searborn, B.

    1998-01-01

    The environmental review process for nuclear waste management and disposal was unusual in that the Panel was asked to examine a concept rather than a specific project at a specific site. The Panel was charged with commenting on the safety and acceptability of the AECL concept, examining criteria for determining the safety and acceptability of any concept for managing nuclear fuel waste, and examining future steps which should be taken. In short, it was asked to provide policy advice to governments. The Panel concluded that safety is a key part, but only one part, of acceptability, and that safety must be viewed from both a technical and a social perspective. It judged that safety of the AECL concept had been adequately demonstrated from a technical perspective, but not from a social perspective. It also concluded that the AECL concept does not have the required level of public acceptability to be adopted as Canada's approach for managing nuclear fuel wastes. The paper examines in some detail the various aspects of the public concerns surrounding the nuclear cycle in general, and the safety of the proposals put forward by AECL for nuclear fuel waste management in particular. It notes the differences between those who look at safety from a technical perspective, and those who look at safety from a social perspective. And it lists the concerns related to acceptability in addition to the key factor of safety. After outlining the Panel's recommendations to governments on future steps to be taken, the paper discusses the extent to which the recommendations respond to the public's concerns. It stresses the importance of Aboriginal participation; of the creation of a new agency to deal with the full range of activities, technical and social, related to long-term management; of the public and decision-makers having more than one viable option to choose from; and of the essentiality of an inter-active process of public participation at all stages of decision-making. Finally

  16. Guidelines regarding the Review Process under the Convention on Nuclear Safety

    International Nuclear Information System (INIS)

    2011-01-01

    These guidelines, established by the Contracting Parties pursuant to Article 22 of the Convention, are intended to be read in conjunction with the text of the Convention. Their purpose is to provide guidance to the Contracting Parties on the process for reviewing National Reports submitted in accordance with Article 5 and thereby to facilitate the efficient review of implementation by the Contracting Parties of their obligations under the Convention. The aim of the review process should be to achieve a thorough examination of National Reports submitted in accordance with Article 5 of the Convention, so that Contracting Parties can learn from each other's solutions to common and individual nuclear safety problems and, above all, contribute to improving nuclear safety worldwide through a constructive exchange of views [fr

  17. Guidelines regarding the review process under the Convention on Nuclear Safety

    International Nuclear Information System (INIS)

    2002-01-01

    These guidelines, established by the Contracting Parties pursuant to Article 22 of the Convention, are intended to be read in conjunction with the text of the Convention. Their purpose is to provide guidance to the Contracting Parties on the process for reviewing National Reports submitted in accordance with Article 5 and thereby to facilitate the efficient review of implementation by the Contracting Parties of their obligations under the Convention. The aim of the review process should be to achieve a thorough examination of National Reports submitted in accordance with Article 5 of the Convention, so that Contracting Parties can learn from each other's solutions to common and individual nuclear safety problems and, above all, contribute to improving nuclear safety worldwide through a constructive exchange of views

  18. Guidelines regarding the review process under the convention on nuclear safety

    International Nuclear Information System (INIS)

    1998-01-01

    These guidelines, established by the Contracting Parties pursuant to Article 22 of the Convention, are intended to be read in conjunction with the text of the Convention. Their purpose is to provide guidance to the Contracting Parties on the process for reviewing national reports submitted in accordance with Article 5 and thereby to facilitate the efficient review of implementation by the Contracting Parties of their obligations under the Convention. The aim of the review process should be to achieve a thorough examination of national reports submitted in accordance with Article 5 of the Convention, so that Contracting Parties can learn from each other's solutions to common and individual nuclear safety problems and, above all, contribute to improving nuclear safety worldwide through a constructive exchange of views

  19. Guidelines regarding the Review Process under the Convention on Nuclear Safety

    International Nuclear Information System (INIS)

    2011-01-01

    These guidelines, established by the Contracting Parties pursuant to Article 22 of the Convention, are intended to be read in conjunction with the text of the Convention. Their purpose is to provide guidance to the Contracting Parties on the process for reviewing National Reports submitted in accordance with Article 5 and thereby to facilitate the efficient review of implementation by the Contracting Parties of their obligations under the Convention. The aim of the review process should be to achieve a thorough examination of National Reports submitted in accordance with Article 5 of the Convention, so that Contracting Parties can learn from each other's solutions to common and individual nuclear safety problems and, above all, contribute to improving nuclear safety worldwide through a constructive exchange of views

  20. Guidelines regarding the review process under the Convention on Nuclear Safety

    International Nuclear Information System (INIS)

    1999-01-01

    These guidelines, established by the Contracting Parties pursuant to Article 22 of the Convention, are intended to be read in conjunction with the text of the Convention. Their purpose is to provide guidance to the Contracting Parties on the process for reviewing national reports submitted in accordance with Article 5 and thereby to facilitate the efficient review of implementation by the Contracting Parties of their obligations under the Convention. The aim of the review process should be to achieve a thorough examination of national reports submitted in accordance with Article 5 of the Convention, so that Contracting Parties can learn from each other's solutions to common and individual nuclear safety problems and, above all, contribute to improving nuclear safety worldwide through a constructive exchange of views

  1. Guidelines regarding the Review Process under the Convention on Nuclear Safety

    International Nuclear Information System (INIS)

    2011-01-01

    These guidelines, established by the Contracting Parties pursuant to Article 22 of the Convention, are intended to be read in conjunction with the text of the Convention. Their purpose is to provide guidance to the Contracting Parties on the process for reviewing National Reports submitted in accordance with Article 5 and thereby to facilitate the efficient review of implementation by the Contracting Parties of their obligations under the Convention. The aim of the review process should be to achieve a thorough examination of National Reports submitted in accordance with Article 5 of the Convention, so that Contracting Parties can learn from each other's solutions to common and individual nuclear safety problems and, above all, contribute to improving nuclear safety worldwide through a constructive exchange of views [es

  2. Thermodynamic-state and kinetic-process dependent dual ferromagnetic states in high-Si content FeMn(PSi) alloys

    International Nuclear Information System (INIS)

    Li, Guijiang; Eriksson, Olle; Johansson, Börje; Vitos, Levente

    2015-01-01

    We have found that thermodynamic state and kinetic process co-determine the dual ferromagnetic (FM) orders in high-Si content FeMnP 1−x Si x (0.25 < x < 0.5). Alloys undergoing high temperature annealing and quenching process prefer a high magnetic moment FM state in a chemically partial disordered structure with low c/a ratio. This mechanism is suggested to be responsible for the often discussed virgin effect as well. A chemically ordered structure obtained by a slow cooling process from a relatively low annealing temperature and the increase in Si content stabilize a metastable lattice with high c/a ratio and FM order with low magnetic moment. The non-simultaneity of the magnetic and structural transitions can be responsible for the occurrence of FM state in the high c/a range. Thus, a c/a ratio that changes from high to low is physically plausible to stabilize the metastable FM order at low temperature. Our theoretical observations indicate that suitable thermodynamic state and kinetic diffusion process is crucial for optimizing magnetocaloric properties and exploring feasible magnetocaloric materials

  3. Book Review: McCoy, Alfred, Policing America’s Empire: The United States, the Philippines, and the Rise of the Surveillance State

    Directory of Open Access Journals (Sweden)

    Salvador Santino F. Regilme, Jr

    2010-01-01

    Full Text Available Book Review of the Monograph: McCoy, Alfred (2009, Policing America’s Empire: The United States, the Philippines, and the Rise of the Surveillance State, Madison, Wisconsin: The University of Wisconsin Press ISBN 978-0-299-23414-0, 659 pages

  4. State-Level Comparison of Processes and Timelines for Distributed Photovoltaic Interconnection in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Ardani, K. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Davidson, C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Nobler, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-01-01

    This report presents results from an analysis of distributed photovoltaic (PV) interconnection and deployment processes in the United States. Using data from more than 30,000 residential (up to 10 kilowatts) and small commercial (10-50 kilowatts) PV systems, installed from 2012 to 2014, we assess the range in project completion timelines nationally (across 87 utilities in 16 states) and in five states with active solar markets (Arizona, California, New Jersey, New York, and Colorado).

  5. A Review of Fusion and Tokamak Research Towards Steady-State Operation: A JAEA Contribution

    Directory of Open Access Journals (Sweden)

    Mitsuru Kikuchi

    2010-11-01

    Full Text Available Providing a historical overview of 50 years of fusion research, a review of the fundamentals and concepts of fusion and research efforts towards the implementation of a steady state tokamak reactor is presented. In 1990, a steady-state tokamak reactor (SSTR best utilizing the bootstrap current was developed. Since then, significant efforts have been made in major tokamaks, including JT-60U, exploring advanced regimes relevant to the steady state operation of tokamaks. In this paper, the fundamentals of fusion and plasma confinement, and the concepts and research on current drive and MHD stability of advanced tokamaks towards realization of a steady-state tokamak reactor are reviewed, with an emphasis on the contributions of the JAEA. Finally, a view of fusion energy utilization in the 21st century is introduced.

  6. Intertime jump statistics of state-dependent Poisson processes.

    Science.gov (United States)

    Daly, Edoardo; Porporato, Amilcare

    2007-01-01

    A method to obtain the probability distribution of the interarrival times of jump occurrences in systems driven by state-dependent Poisson noise is proposed. Such a method uses the survivor function obtained by a modified version of the master equation associated to the stochastic process under analysis. A model for the timing of human activities shows the capability of state-dependent Poisson noise to generate power-law distributions. The application of the method to a model for neuron dynamics and to a hydrological model accounting for land-atmosphere interaction elucidates the origin of characteristic recurrence intervals and possible persistence in state-dependent Poisson models.

  7. 44 CFR 63.16 - Review of State application by the Federal Insurance Administrator.

    Science.gov (United States)

    2010-10-01

    ... for eligibility and indicate in what respects the State program and/or data base fails to comply with... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Review of State application... FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF HOMELAND SECURITY INSURANCE AND HAZARD MITIGATION...

  8. Electrokinetic-enhanced bioremediation of organic contaminants: a review of processes and environmental applications.

    Science.gov (United States)

    Gill, R T; Harbottle, M J; Smith, J W N; Thornton, S F

    2014-07-01

    There is current interest in finding sustainable remediation technologies for the removal of contaminants from soil and groundwater. This review focuses on the combination of electrokinetics, the use of an electric potential to move organic and inorganic compounds, or charged particles/organisms in the subsurface independent of hydraulic conductivity; and bioremediation, the destruction of organic contaminants or attenuation of inorganic compounds by the activity of microorganisms in situ or ex situ. The objective of the review is to examine the state of knowledge on electrokinetic bioremediation and critically evaluate factors which affect the up-scaling of laboratory and bench-scale research to field-scale application. It discusses the mechanisms of electrokinetic bioremediation in the subsurface environment at different micro and macroscales, the influence of environmental processes on electrokinetic phenomena and the design options available for application to the field scale. The review also presents results from a modelling exercise to illustrate the effectiveness of electrokinetics on the supply electron acceptors to a plume scale scenario where these are limiting. Current research needs include analysis of electrokinetic bioremediation in more representative environmental settings, such as those in physically heterogeneous systems in order to gain a greater understanding of the controlling mechanisms on both electrokinetics and bioremediation in those scenarios. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

  9. Luminescent materials: probing the excited state of emission centers by spectroscopic methods

    International Nuclear Information System (INIS)

    Mihóková, E; Nikl, M

    2015-01-01

    We review recent methods employed to study the excited state of rare-earth centers in various luminescent and scintillating materials. The focus is on processes that help determine localization of the excited state within the material band gap, namely photoionization and thermally stimulated ionization. Then the tunneling process between the luminescence center and the trapping state is addressed. We describe the experimental implementation of methods recently developed to study these processes. We report theoretical models helping the data interpretation. We also present application to currently investigated materials. (topical review)

  10. Progress in catalytic naphtha reforming process: A review

    International Nuclear Information System (INIS)

    Rahimpour, Mohammad Reza; Jafari, Mitra; Iranshahi, Davood

    2013-01-01

    Catalytic naphtha reforming process is a vital process for refineries due to the production of high-octane components, which is intensely demanded in our modern life. The significance of this industrial process induced researchers to investigate different aspects of catalytic naphtha reforming process intensively. Some of the investigators try to improve this process by representing more effective catalysts, while others try to elucidate its kinetic and deactivation mechanisms and design more efficient reactor setups. The amount of these established papers is so much that may confuse some of the researchers who want to find collective information about catalytic naphtha reforming process. In the present paper, the published studies from 1949 until now are categorized into three main groups including finding suitable catalyst, revealing appropriate kinetic and deactivation model, and suggesting efficient reactor configuration and mode of operation. These studies are reviewed separately, and a suitable reference is provided for those who want to have access to generalized information about catalytic naphtha reforming process. Finally, various suggestions for revamping the catalytic naphtha reforming process have been proposed as a guideline for further investigations

  11. Nutrition Program Quality Assurance through a Formalized Process of On-Site Program Review

    Science.gov (United States)

    Paddock, Joan Doyle; Dollahite, Jamie

    2012-01-01

    A protocol for a systematic onsite review of the Expanded Food and Nutrition Education Program and Supplemental Nutrition Assistance Program-Education was developed to support quality programming and ensure compliance with state guidelines and federal regulations. Onsite review of local nutrition program operations is one strategy to meet this…

  12. Natural language processing: state of the art and prospects for significant progress, a workshop sponsored by the National Library of Medicine.

    Science.gov (United States)

    Friedman, Carol; Rindflesch, Thomas C; Corn, Milton

    2013-10-01

    Natural language processing (NLP) is crucial for advancing healthcare because it is needed to transform relevant information locked in text into structured data that can be used by computer processes aimed at improving patient care and advancing medicine. In light of the importance of NLP to health, the National Library of Medicine (NLM) recently sponsored a workshop to review the state of the art in NLP focusing on text in English, both in biomedicine and in the general language domain. Specific goals of the NLM-sponsored workshop were to identify the current state of the art, grand challenges and specific roadblocks, and to identify effective use and best practices. This paper reports on the main outcomes of the workshop, including an overview of the state of the art, strategies for advancing the field, and obstacles that need to be addressed, resulting in recommendations for a research agenda intended to advance the field. Copyright © 2013 The Authors. Published by Elsevier Inc. All rights reserved.

  13. Membrane Separation Processes for Post-Combustion Carbon Dioxide Capture: State of the Art and Critical Overview

    Directory of Open Access Journals (Sweden)

    Belaissaoui Bouchra

    2014-11-01

    Full Text Available Membrane processes have been initially seldom considered within a post-combustion carbon dioxide capture framework. More traditional processes, particularly gas-liquid absorption in chemical solvents, are often considered as the most appropriate solution for the first generation of technologies. In this paper, a critical state of the art of gas separation membranes for CO2 capture is proposed. In a first step, the key performances (selectivity, permeability of different membrane materials such as polymers, inorganic membranes, hybrid matrices and liquid membranes, including recently reported results, are reviewed. In a second step, the process design characteristics of a single stage membrane unit are studied. Purity and energy constraints are analysed as a function of operating conditions and membrane materials performances. The interest of multistage and hybrid systems, two domains which have not sufficiently investigated up to now, are finally discussed. The importance of technico-economical analyses is highlighted in order to better estimate the optimal role of membranes for CCS applications.

  14. The Fulde–Ferrell–Larkin–Ovchinnikov state for ultracold fermions in lattice and harmonic potentials: a review

    Science.gov (United States)

    Kinnunen, Jami J.; Baarsma, Jildou E.; Martikainen, Jani-Petri; Törmä, Päivi

    2018-04-01

    We review the concepts and the present state of theoretical studies of spin-imbalanced superfluidity, in particular the elusive Fulde–Ferrell–Larkin–Ovchinnikov (FFLO) state, in the context of ultracold quantum gases. The comprehensive presentation of the theoretical basis for the FFLO state that we provide is useful also for research on the interplay between magnetism and superconductivity in other physical systems. We focus on settings that have been predicted to be favourable for the FFLO state, such as optical lattices in various dimensions and spin–orbit coupled systems. These are also the most likely systems for near-future experimental observation of the FFLO state. Theoretical bounds, such as Bloch’s and Luttinger’s theorems, and experimentally important limitations, such as finite-size effects and trapping potentials, are considered. In addition, we provide a comprehensive review of the various ideas presented for the observation of the FFLO state. We conclude our review with an analysis of the open questions related to the FFLO state, such as its stability, superfluid density, collective modes and extending the FFLO superfluid concept to new types of lattice systems.

  15. Stake holder involvement in the Canadian review process for uranium production projects in Northern Saskatchewan

    International Nuclear Information System (INIS)

    Underhill, D.

    2004-01-01

    This report describes the Canadian environmental review process for uranium production projects as a case study for the purpose of understanding the nature and value of stakeholder involvement in the management of radiological hazards. While the Canadian review process potentially applies to any development, this case study focuses on the assessment of the uranium projects of northern Saskatchewan conducted during the 1990's. It describes the environmental assessment (EA) conducted in the 1990's for six new uranium facilities (including mines and mills and related tailings disposal sites) planned in northern Saskatchewan. Both the Canadian federal and the Saskatchewan provincial government have extensive environmental review processes that must under law be complete before any major industrial development judged to have potential environmental impacts is undertaken within their respective territories. However, even in those instances where no clear potential environmental impacts are evident, Canadian law mandates 'if public concern about the proposal is such that a public review is desirable, the initiating department shall refer the proposal to the Minister for review by a Panel'. (Wh95) As a stakeholder under law, in both Canada and Saskatchewan, the public plays an important role in the environmental review process. To encourage participation and assist the public in its review the two governments may provide funding (as done in this review) to assist qualified individuals or groups to participant in the review process. The first section of this case study sets the scene. It describes the Saskatchewan uranium mining story, focusing on how the importance of the public stakeholder evolved to become a major component, under law, in the EA process for new uranium mines. This increase in stakeholder involvement opportunities coincided with heightened public concern for the socio-economic impacts of the projects. In the late 1980's both governments were advised by

  16. Peer Review: Promoting Efficient School District Operations

    Science.gov (United States)

    Hale, Jason S.

    2010-01-01

    Many professions recognize the benefits of peer reviews to assess processes and operations because peers can more easily identify one another's inefficiencies and provide some kind of intervention. Generally, the goal of the peer review process is to verify whether the work satisfies the standards set by the industry. A number of states have begun…

  17. Systematic review of health state utility values for acute myeloid leukemia

    OpenAIRE

    Forsythe, Anna; Brandt, Patricia S; Dolph, Mike; Patel, Sachin; Rabe, Adrian Paul J; Tremblay, Gabriel

    2018-01-01

    Anna Forsythe,1 Patricia S Brandt,2 Mike Dolph,1 Sachin Patel,3 Adrian Paul J Rabe,1 Gabriel Tremblay1 1Purple Squirrel Economics, New York, NY, 2Novartis Pharmaceuticals, East Hanover, NJ, USA; 3Novartis Pharmaceuticals UK Limited, Frimley, Camberley, Surrey, UK Background: Cost-utility analyses for acute myeloid leukemia (AML) require health state utility values (HSUVs) in order to calculate quality-adjusted life-years (QALYs) for each health state. Aim: This study reviewed AML-related HSU...

  18. Acceleration processes in the magnetospheric plasma: a review

    Energy Technology Data Exchange (ETDEWEB)

    Nishida, A [Tokyo Univ. (Japan). Inst. of Space and Aeronautical Science

    1975-01-01

    Our present knowledge on the acceleration process in the magnetospheric plasma is reviewed and major problems are summarized. Acceleration processes can be classified into three categories. First, acceleration can be made by the reconnection process in the magnetotail. The occurrence of reconnection during substorm expansion phases has been confirmed, but details of the energy conversion mechanism need be clarified. Second, acceleration by the electric potential drop along magnetic field lines has been strongly suggested from observations of precipitating particles. The position and structure of the potential layer, however, have not been clarified, and theoretical understanding of the process is still in the early stage of development. Third, particles can be adiabatically heated as they are driven toward the earth in the course of their convective motion. Spatial structure and dynamical development of the auroral precipitation pattern represent both challenge and clue to the understanding of the magnetospheric acceleration process.

  19. Guidelines regarding the Review Process under the Convention on Nuclear Safety

    International Nuclear Information System (INIS)

    2013-01-01

    These Guidelines, established by the Contracting Parties pursuant to Article 22 of the Convention, are intended to be read in conjunction with the text of the Convention. Their purpose is to provide guidance to the Contracting Parties on the process for reviewing National Reports submitted in accordance with Article 5 of the Convention and thereby to facilitate the efficient review of implementation by the Contracting Parties of their obligations under the Convention. The aim of the review process should be to achieve a thorough examination of National Reports submitted in accordance with Article 5 of the Convention, so that Contracting Parties can learn from each other's solutions to common and individual nuclear safety problems and, above all, contribute to improving nuclear safety worldwide through a constructive exchange of views. [fr

  20. Guidelines regarding the Review Process under the Convention on Nuclear Safety

    International Nuclear Information System (INIS)

    2013-01-01

    These Guidelines, established by the Contracting Parties pursuant to Article 22 of the Convention, are intended to be read in conjunction with the text of the Convention. Their purpose is to provide guidance to the Contracting Parties on the process for reviewing National Reports submitted in accordance with Article 5 of the Convention and thereby to facilitate the efficient review of implementation by the Contracting Parties of their obligations under the Convention. The aim of the review process should be to achieve a thorough examination of National Reports submitted in accordance with Article 5 of the Convention, so that Contracting Parties can learn from each other's solutions to common and individual nuclear safety problems and, above all, contribute to improving nuclear safety worldwide through a constructive exchange of views.

  1. Guidelines regarding the Review Process under the Convention on Nuclear Safety

    International Nuclear Information System (INIS)

    2013-01-01

    These Guidelines, established by the Contracting Parties pursuant to Article 22 of the Convention, are intended to be read in conjunction with the text of the Convention. Their purpose is to provide guidance to the Contracting Parties on the process for reviewing National Reports submitted in accordance with Article 5 of the Convention and thereby to facilitate the efficient review of implementation by the Contracting Parties of their obligations under the Convention. The aim of the review process should be to achieve a thorough examination of National Reports submitted in accordance with Article 5 of the Convention, so that Contracting Parties can learn from each other's solutions to common and individual nuclear safety problems and, above all, contribute to improving nuclear safety worldwide through a constructive exchange of views. [es

  2. A review on the process technology for Mo-99 production

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Hoh; Yoo, Jae Hyung; Jung, Won Myung; Lee, Kyoo Il; Woo, Moon Sik; Hwang, Doo Sung; Kim, Yun Koo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-07-01

    Tc-99m is most frequently used in nuclear medical diagnostics because of its favourable nuclear properties and reasonable prices, and the demand of Tc-99m, is on the increase recently. Mo-99, the parent radionuclide of Tc-99m, is the only source of Tc-99m. This review described overall aspects of process technologies for Mo-99 production. Firstly, the chemical, physical and radioactive properties of Tc-99m, Mo-99 were examined to understand Mo-99 separation process. Also, the technology for Mo-99 production with both the neutron capture and nuclear fission method were examined. But the neutron capture method was scarcely used for large production of Mo-99 because of its low specific activity and high production cost. This review also described mainly process technologies in the nuclear fission method, fabrication and condition for irradiation of targets, transport and dissolution of targets irradiated, separation and purification of Mo-99, etc. Especially, for Mo-99 separation and purification process, the characteristics, merits and demerits of various processes, which have been developed in a few countries, were examined and analyzed. 30 figs., 16 tabs., 60 refs. (Author).

  3. A Systematic Review of Transcendent States Across Meditation and Contemplative Traditions.

    Science.gov (United States)

    Wahbeh, Helané; Sagher, Amira; Back, Wallis; Pundhir, Pooja; Travis, Frederick

    Across cultures and throughout history, transcendent states achieved through meditative practices have been reported. The practices to attain transcendent states vary from transcendental meditation to yoga to contemplative prayer, to other various forms of sitting meditation. While these transcendent states are ascribed many different terms, those who experience them describe a similar unitive, ineffable state of consciousness. Despite the common description, few studies have systematically examined transcendent states during meditation. The objectives of this systematic review were to: 1) characterize studies evaluating transcendent states associated with meditation in any tradition; 2) qualitatively describe physiological and phenomenological outcomes collected during transcendent states and; 3) evaluate the quality of these studies using the Quality Assessment Tool. Medline, PsycINFO, CINAHL, AltHealthWatch, AMED, and the Institute of Noetic Science Meditation Library were searched for relevant papers in any language. Included studies required adult participants and the collection of outcomes before, during, or after a reported transcendent state associated with meditation. Twenty-five studies with a total of 672 combined participants were included in the final review. Participants were mostly male (61%; average age 39 ± 11 years) with 12.7 ± 6.6 (median 12.6; range 2-40) average years of meditation practice. A variety of meditation traditions were represented: (Buddhist; Christian; Mixed (practitioners from multiple traditions); Vedic: Transcendental Meditation and Yoga). The mean quality score was 67 ± 13 (100 highest score possible). Subjective phenomenology and the objective outcomes of electroencephalography (EEG), electrocardiography, electromyography, electrooculogram, event-related potentials, functional magnetic resonance imaging, magnetoencephalography, respiration, and skin conductance and response were measured. Transcendent states were most

  4. Quality Control and Peer Review of Data Sets: Mapping Data Archiving Processes to Data Publication Requirements

    Science.gov (United States)

    Mayernik, M. S.; Daniels, M.; Eaker, C.; Strand, G.; Williams, S. F.; Worley, S. J.

    2012-12-01

    Data sets exist within scientific research and knowledge networks as both technical and non-technical entities. Establishing the quality of data sets is a multi-faceted task that encompasses many automated and manual processes. Data sets have always been essential for science research, but now need to be more visible as first-class scholarly objects at national, international, and local levels. Many initiatives are establishing procedures to publish and curate data sets, as well as to promote professional rewards for researchers that collect, create, manage, and preserve data sets. Traditionally, research quality has been assessed by peer review of textual publications, e.g. journal articles, conference proceedings, and books. Citation indices then provide standard measures of productivity used to reward individuals for their peer-reviewed work. Whether a similar peer review process is appropriate for assessing and ensuring the quality of data sets remains as an open question. How does the traditional process of peer review apply to data sets? This presentation will describe current work being done at the National Center for Atmospheric Research (NCAR) in the context of the Peer REview for Publication & Accreditation of Research Data in the Earth sciences (PREPARDE) project. PREPARDE is assessing practices and processes for data peer review, with the goal of developing recommendations. NCAR data management teams perform various kinds of quality assessment and review of data sets prior to making them publicly available. The poster will investigate how notions of peer review relate to the types of data review already in place at NCAR. We highlight the data set characteristics and management/archiving processes that challenge the traditional peer review processes by using a number of questions as probes, including: Who is qualified to review data sets? What formal and informal documentation is necessary to allow someone outside of a research team to review a data set

  5. Making Faces - State-Space Models Applied to Multi-Modal Signal Processing

    DEFF Research Database (Denmark)

    Lehn-Schiøler, Tue

    2005-01-01

    The two main focus areas of this thesis are State-Space Models and multi modal signal processing. The general State-Space Model is investigated and an addition to the class of sequential sampling methods is proposed. This new algorithm is denoted as the Parzen Particle Filter. Furthermore...... optimizer can be applied to speed up convergence. The linear version of the State-Space Model, the Kalman Filter, is applied to multi modal signal processing. It is demonstrated how a State-Space Model can be used to map from speech to lip movements. Besides the State-Space Model and the multi modal...... application an information theoretic vector quantizer is also proposed. Based on interactions between particles, it is shown how a quantizing scheme based on an analytic cost function can be derived....

  6. Human-system interface design review guideline -- Process and guidelines: Final report. Revision 1, Volume 1

    International Nuclear Information System (INIS)

    1996-06-01

    NUREG-0700, Revision 1, provides human factors engineering (HFE) guidance to the US Nuclear Regulatory Commission staff for its: (1) review of the human system interface (HSI) design submittals prepared by licensees or applications for a license or design certification of commercial nuclear power plants, and (2) performance of HSI reviews that could be undertaken as part of an inspection or other type of regulatory review involving HSI design or incidents involving human performance. The guidance consists of a review process and HFE guidelines. The document describes those aspects of the HSI design review process that are important to the identification and resolution of human engineering discrepancies that could adversely affect plant safety. Guidance is provided that could be used by the staff to review an applicant's HSI design review process or to guide the development of an HSI design review plan, e.g., as part of an inspection activity. The document also provides detailed HFE guidelines for the assessment of HSI design implementations. NUREG-0700, Revision 1, consists of three stand-alone volumes. Volume 1 consists of two major parts. Part 1 describes those aspects of the review process of the HSI design that are important to identifying and resolving human engineering discrepancies. Part 2 contains detailed guidelines for a human factors engineering review which identify criteria for assessing the implementation of an applicant's or licensee's HSI design

  7. Transportation of Wheelchair Seated Students in School Buses: A Review of State Policy

    Science.gov (United States)

    Moore, Britta; Fuhrman, Susan; Karg, Patricia

    2010-01-01

    This study quantitatively reviews publicly available state policies as they relate to the transportation of wheelchair-seated students in school buses. Inclusion of best practices in specially equipped school bus and driver training policies was assessed. Key points of interest within state policies were identified based on site visits, common…

  8. 77 FR 59238 - Call for Expert Reviewers to the U.S. Government Review of the Working Group I Contribution to...

    Science.gov (United States)

    2012-09-26

    ... expert review process, which occurs in parallel with the U.S. government review. More information on the... DEPARTMENT OF STATE [Public Notice 8042] Call for Expert Reviewers to the U.S. Government Review... both experts and governments. The Second Order Draft of the Working Group I contribution to the 5th...

  9. Automation of the DoD Export License Application Review Process

    National Research Council Canada - National Science Library

    Young, Shelton

    2002-01-01

    .... The overall audit objective was to determine whether Federal automation programs supporting the export license and review process could be used to establish a common electronic interface creating...

  10. State Standard-Setting Processes in Brief. State Academic Standards: Standard-Setting Processes

    Science.gov (United States)

    Thomsen, Jennifer

    2014-01-01

    Concerns about academic standards, whether created by states from scratch or adopted by states under the Common Core State Standards (CCSS) banner, have drawn widespread media attention and are at the top of many state policymakers' priority lists. Recently, a number of legislatures have required additional steps, such as waiting periods for…

  11. Working in Triads: A Case Study of a Peer Review Process

    Science.gov (United States)

    Grainger, Peter; Bridgstock, Martin; Houston, Todd; Drew, Steve

    2015-01-01

    Peer review of teaching has become an accepted educational procedure in Australia to quality assure the quality of teaching practices. The institutional implementation of the peer review process can be viewed as genuine desire to improve teaching quality or an imposition from above as a measure of accountability and performativity. One approach is…

  12. Review of the literature for dry reprocessing oxide, metal, and carbide fuel: The AIROX, RAHYD, and CARBOX pyrochemical processes

    Energy Technology Data Exchange (ETDEWEB)

    Hoyt, R.C.; Rhee, B.W. [Rockwell International Corp., Canoga Park, CA (United States). Energy Systems Group

    1979-09-30

    The state of the art of dry processing oxide, carbide, and metal fuel has been determined through an extensive literature review. Dry processing in one of the most proliferation resistant fuel reprocessing technologies available to date, and is one of the few which can be exported to other countries. Feasibility has been established for oxide, carbide, and metal fuel on a laboratory scale, and large-scale experiments on oxide and carbide fuel have shown viability of the dry processing concept. A complete dry processing cycle has been demonstrated by multicycle processing-refabrication-reirradiation experiments on oxide fuel. Additional experimental work is necessary to: (1) demonstrate the complete fuel cycle for carbide and metal fuel, (2) optimize dry processing conditions, and (3) establish fission product behavior. Dry process waste management is easier than for an aqueous processing facility since wastes are primarily solids and gases. Waste treatment can be accomplished by techniques which have been, or are being, developed for aqueous plants.

  13. An examination of gender differences in the American Fisheries Society peer-review process

    Science.gov (United States)

    Handley, Grace; Frantz, Cynthia M; Kocovsky, Patrick; DeVries, Dennis R.; Cooke, Steven J.; Claussen, Julie

    2015-01-01

    This study investigated the possibility of gender differences in outcomes throughout the peer review process of American Fisheries Society (AFS) journals. For each manuscript submitted to four AFS journals between January 2003 and December 2010, we collated information regarding the gender and nationality of authors, gender of associate editor, gender of reviewers, reviewer recommendations, associate editor's decision, and publication status of the manuscript. We used hierarchical linear modeling to test for differences in manuscript decision outcomes associated with author, reviewer, and associate editor gender. Gender differences were present at some but not every stage of the review process and were not equal among the four journals. Although there was a small gender difference in decision outcomes, we found no evidence of bias in editors’ and reviewers’ recommendations. Our results support the conclusion that the current single-blind review system does not result in bias against female authors within AFS journals.

  14. Review: Regional groundwater flow modeling in heavily irrigated basins of selected states in the western United States

    Science.gov (United States)

    Rossman, Nathan R.; Zlotnik, Vitaly A.

    2013-09-01

    Water resources in agriculture-dominated basins of the arid western United States are stressed due to long-term impacts from pumping. A review of 88 regional groundwater-flow modeling applications from seven intensively irrigated western states (Arizona, California, Colorado, Idaho, Kansas, Nebraska and Texas) was conducted to provide hydrogeologists, modelers, water managers, and decision makers insight about past modeling studies that will aid future model development. Groundwater models were classified into three types: resource evaluation models (39 %), which quantify water budgets and act as preliminary models intended to be updated later, or constitute re-calibrations of older models; management/planning models (55 %), used to explore and identify management plans based on the response of the groundwater system to water-development or climate scenarios, sometimes under water-use constraints; and water rights models (7 %), used to make water administration decisions based on model output and to quantify water shortages incurred by water users or climate changes. Results for 27 model characteristics are summarized by state and model type, and important comparisons and contrasts are highlighted. Consideration of modeling uncertainty and the management focus toward sustainability, adaptive management and resilience are discussed, and future modeling recommendations, in light of the reviewed models and other published works, are presented.

  15. Physical processes in the Gulf of Kachchh: A review

    Digital Repository Service at National Institute of Oceanography (India)

    Vethamony, P.; Babu, M.T.

    A brief review of various physical processes acting in the Gulf of Kachchh (GoK), which have prominent roles in Gulf dynamics, is presented in this article. The eddies present in the GoK confirm that they are permanent features of the Go...

  16. Development of an evidence-based review with recommendations using an online iterative process.

    Science.gov (United States)

    Rudmik, Luke; Smith, Timothy L

    2011-01-01

    The practice of modern medicine is governed by evidence-based principles. Due to the plethora of medical literature, clinicians often rely on systematic reviews and clinical guidelines to summarize the evidence and provide best practices. Implementation of an evidence-based clinical approach can minimize variation in health care delivery and optimize the quality of patient care. This article reports a method for developing an "Evidence-based Review with Recommendations" using an online iterative process. The manuscript describes the following steps involved in this process: Clinical topic selection, Evidence-hased review assignment, Literature review and initial manuscript preparation, Iterative review process with author selection, and Manuscript finalization. The goal of this article is to improve efficiency and increase the production of evidence-based reviews while maintaining the high quality and transparency associated with the rigorous methodology utilized for clinical guideline development. With the rise of evidence-based medicine, most medical and surgical specialties have an abundance of clinical topics which would benefit from a formal evidence-based review. Although clinical guideline development is an important methodology, the associated challenges limit development to only the absolute highest priority clinical topics. As outlined in this article, the online iterative approach to the development of an Evidence-based Review with Recommendations may improve productivity without compromising the quality associated with formal guideline development methodology. Copyright © 2011 American Rhinologic Society-American Academy of Otolaryngic Allergy, LLC.

  17. The disciplinary process for chiropractors in the Province of Ontario: a review

    OpenAIRE

    Gotlib, Allan

    1998-01-01

    The purpose of this manuscript is to review in a generic sense, the process of discipline of chiropractors in the jurisdiction of Ontario and to raise the consideration currently extended to various provisions set out in the Regulated Health Professions Act, 1991, as amended (RHPA). Various procedural logistics are reviewed in the context of procedural fairness and due process. While authority rests with the law and the courts, the implementation of discretionary initiatives may not be in the...

  18. Processing methods, characteristics and adsorption behavior of tire derived carbons: a review.

    Science.gov (United States)

    Saleh, Tawfik A; Gupta, Vinod Kumar

    2014-09-01

    The remarkable increase in the number of vehicles worldwide; and the lack of both technical and economical mechanisms of disposal make waste tires to be a serious source of pollution. One potential recycling process is pyrolysis followed by chemical activation process to produce porous activated carbons. Many researchers have recently proved the capability of such carbons as adsorbents to remove various types of pollutants including organic and inorganic species. This review attempts to compile relevant knowledge about the production methods of carbon from waste rubber tires. The effects of various process parameters including temperature and heating rate, on the pyrolysis stage; activation temperature and time, activation agent and activating gas are reviewed. This review highlights the use of waste-tires derived carbon to remove various types of pollutants like heavy metals, dye, pesticides and others from aqueous media. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. 15 CFR 400.32 - Procedure for review of request for approval of manufacturing or processing.

    Science.gov (United States)

    2010-01-01

    ... approval of manufacturing or processing. 400.32 Section 400.32 Commerce and Foreign Trade Regulations... REGULATIONS OF THE FOREIGN-TRADE ZONES BOARD Manufacturing and Processing Activity-Reviews § 400.32 Procedure for review of request for approval of manufacturing or processing. (a) Request as part of application...

  20. Consolidated principles for screening based on a systematic review and consensus process.

    Science.gov (United States)

    Dobrow, Mark J; Hagens, Victoria; Chafe, Roger; Sullivan, Terrence; Rabeneck, Linda

    2018-04-09

    In 1968, Wilson and Jungner published 10 principles of screening that often represent the de facto starting point for screening decisions today; 50 years on, are these principles still the right ones? Our objectives were to review published work that presents principles for population-based screening decisions since Wilson and Jungner's seminal publication, and to conduct a Delphi consensus process to assess the review results. We conducted a systematic review and modified Delphi consensus process. We searched multiple databases for articles published in English in 1968 or later that were intended to guide population-based screening decisions, described development and modification of principles, and presented principles as a set or list. Identified sets were compared for basic characteristics (e.g., number, categorization), a citation analysis was conducted, and principles were iteratively synthesized and consolidated into categories to assess evolution. Participants in the consensus process assessed the level of agreement with the importance and interpretability of the consolidated screening principles. We identified 41 sets and 367 unique principles. Each unique principle was coded to 12 consolidated decision principles that were further categorized as disease/condition, test/intervention or program/system principles. Program or system issues were the focus of 3 of Wilson and Jungner's 10 principles, but comprised almost half of all unique principles identified in the review. The 12 consolidated principles were assessed through 2 rounds of the consensus process, leading to specific refinements to improve their relevance and interpretability. No gaps or missing principles were identified. Wilson and Jungner's principles are remarkably enduring, but increasingly reflect a truncated version of contemporary thinking on screening that does not fully capture subsequent focus on program or system principles. Ultimately, this review and consensus process provides a

  1. Consolidated principles for screening based on a systematic review and consensus process

    Science.gov (United States)

    Hagens, Victoria; Chafe, Roger; Sullivan, Terrence; Rabeneck, Linda

    2018-01-01

    BACKGROUND: In 1968, Wilson and Jungner published 10 principles of screening that often represent the de facto starting point for screening decisions today; 50 years on, are these principles still the right ones? Our objectives were to review published work that presents principles for population-based screening decisions since Wilson and Jungner’s seminal publication, and to conduct a Delphi consensus process to assess the review results. METHODS: We conducted a systematic review and modified Delphi consensus process. We searched multiple databases for articles published in English in 1968 or later that were intended to guide population-based screening decisions, described development and modification of principles, and presented principles as a set or list. Identified sets were compared for basic characteristics (e.g., number, categorization), a citation analysis was conducted, and principles were iteratively synthesized and consolidated into categories to assess evolution. Participants in the consensus process assessed the level of agreement with the importance and interpretability of the consolidated screening principles. RESULTS: We identified 41 sets and 367 unique principles. Each unique principle was coded to 12 consolidated decision principles that were further categorized as disease/condition, test/intervention or program/system principles. Program or system issues were the focus of 3 of Wilson and Jungner’s 10 principles, but comprised almost half of all unique principles identified in the review. The 12 consolidated principles were assessed through 2 rounds of the consensus process, leading to specific refinements to improve their relevance and interpretability. No gaps or missing principles were identified. INTERPRETATION: Wilson and Jungner’s principles are remarkably enduring, but increasingly reflect a truncated version of contemporary thinking on screening that does not fully capture subsequent focus on program or system principles

  2. Process monitoring for reprocessing plant safeguards: a summary review

    International Nuclear Information System (INIS)

    Kerr, H.T.; Ehinger, M.H.; Wachter, J.W.; Hebble, T.L.

    1986-10-01

    Process monitoring is a term typically associated with a detailed look at plant operating data to determine plant status. Process monitoring has been generally associated with operational control of plant processes. Recently, process monitoring has been given new attention for a possible role in international safeguards. International Safeguards Project Office (ISPO) Task C.59 has the goal to identify specific roles for process monitoring in international safeguards. As the preliminary effort associated with this task, a review of previous efforts in process monitoring for safeguards was conducted. Previous efforts mentioned concepts and a few specific applications. None were comprehensive in addressing all aspects of a process monitoring application for safeguards. This report summarizes the basic elements that must be developed in a comprehensive process monitoring application for safeguards. It then summarizes the significant efforts that have been documented in the literature with respect to the basic elements that were addressed

  3. Obesity prevention in child care: A review of U.S. state regulations

    Directory of Open Access Journals (Sweden)

    Slining Meghan

    2008-05-01

    Full Text Available ABSTRACT Objective To describe and contrast individual state nutrition and physical activity regulations related to childhood obesity for child care centers and family child care homes in the United States. Methods We conducted a review of regulations for child care facilities for all 50 states and the District of Columbia. We examined state regulations and recorded key nutrition and physical activity items that may contribute to childhood obesity. Items included in this review were: 1 Water is freely available; 2 Sugar-sweetened beverages are limited; 3 Foods of low nutritional value are limited; 4 Children are not forced to eat; 5 Food is not used as a reward; 6 Support is provided for breastfeeding and provision of breast milk; 7 Screen time is limited; and 8 Physical activity is required daily. Results Considerable variation exists among state nutrition and physical activity regulations related to obesity. Tennessee had six of the eight regulations for child care centers, and Delaware, Georgia, Indiana, and Nevada had five of the eight regulations. Conversely, the District of Columbia, Idaho, Nebraska and Washington had none of the eight regulations. For family child care homes, Georgia and Nevada had five of the eight regulations; Arizona, Mississippi, North Carolina, Oregon, Tennessee, Texas, Vermont, and West Virginia had four of the eight regulations. California, the District of Columbia, Idaho, Iowa, Kansas, and Nebraska did not have any of the regulations related to obesity for family child care homes. Conclusion Many states lack specific nutrition and physical activity regulations related to childhood obesity for child care facilities. If widely implemented, enhancing state regulations could help address the obesity epidemic in young children in the United States.

  4. Reactor systems for syngas fermentation processes: a review

    DEFF Research Database (Denmark)

    Asimakopoulos, Konstantinos; Gavala, Hariklia N.; Skiadas, Ioannis V.

    2018-01-01

    Abstract Implementation of biofuels as an alternative to fossil fuels has been established as an answer to climate change by limiting GHG emissions. Syngas fermentation has emerged as a promising process for the conversion of waste biomasses to valuable products with bioethanol being on the main...... of this review is to assemble all these techniques applied in syngas fermentation, focusing on the different bioreactor configurations operated in continuous mode for the production of liquid and gas biofuels. This article also outlines the so far entrepreneurial initiatives and the progress made towards...... the commercialization of the process....

  5. Nuclear fuel waste management and disposal concept: Report. Federal environmental assessment review process

    International Nuclear Information System (INIS)

    1998-01-01

    The Canadian concept for disposing CANDU reactor waste or high-level nuclear wastes from reprocessing involves underground disposal in sealed containers emplaced in buffer-filled and sealed vaults 500--1,000 meters below ground, in plutonic rock of the Canadian Shield. This document presents the report of a panel whose mandate was to review this concept (rather than a specific disposal project at a specific site) along with a broad range of related policy issues, and to conduct that review in five provinces (including reviews with First Nations groups). It first outlines the review process and then describes the nature of the problem of nuclear waste management. It then presents an overview of the concept being reviewed, its implementation stages, performance assessment analyses performed on the concept, and implications of a facility based on that concept (health, environmental, social, transportation, economic). The fourth section examines the criteria by which the safety and acceptability of the concept should be evaluated. This is followed by a safety and acceptability evaluation from both technical and social perspectives. Section six proposes future steps for building and determining acceptability of the concept, including an Aboriginal participation process, creation of a Nuclear Fuel Waste Management Agency, and a public participation process. The final section discusses some issues outside the panel's mandate, such as energy policy and renewable energy sources. Appendices include a chronology of panel activities, a review of radiation hazards, comparison between nuclear waste management and the management of other wastes, a review of other countries' approaches to long-term management of nuclear fuel wastes, and details of a siting process proposed by the panel

  6. State property tax incentives for promoting ecosystem goods and services from private forest land in the United States: a review and analysis

    Science.gov (United States)

    Michael A. Kilgore; Paul B. Ellefson; Travis J. Funk; Gregory E. Frey

    2017-01-01

    Financial incentives provided by State property tax programs are a means of promoting ecosystem services from private forest land. Identified by this 50-State 2015 review, categories of ecosystem services frequently promoted by such programs are open space and scenic resources, conservation of...

  7. Review of the Use of Bioindication Method for Appraisal of the State ...

    African Journals Online (AJOL)

    komla

    Such circumstances specified the need to review the ecological state of sections ... and the availability of data made it convenient to select Elagin Ostrov and Vasileostrovsky as model ..... Hydrological aspects of urban environment Leningrad.

  8. Human-system interface design review guideline -- Process and guidelines: Final report. Revision 1, Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    1996-06-01

    NUREG-0700, Revision 1, provides human factors engineering (HFE) guidance to the US Nuclear Regulatory Commission staff for its: (1) review of the human system interface (HSI) design submittals prepared by licensees or applications for a license or design certification of commercial nuclear power plants, and (2) performance of HSI reviews that could be undertaken as part of an inspection or other type of regulatory review involving HSI design or incidents involving human performance. The guidance consists of a review process and HFE guidelines. The document describes those aspects of the HSI design review process that are important to the identification and resolution of human engineering discrepancies that could adversely affect plant safety. Guidance is provided that could be used by the staff to review an applicant`s HSI design review process or to guide the development of an HSI design review plan, e.g., as part of an inspection activity. The document also provides detailed HFE guidelines for the assessment of HSI design implementations. NUREG-0700, Revision 1, consists of three stand-alone volumes. Volume 1 consists of two major parts. Part 1 describes those aspects of the review process of the HSI design that are important to identifying and resolving human engineering discrepancies. Part 2 contains detailed guidelines for a human factors engineering review which identify criteria for assessing the implementation of an applicant`s or licensee`s HSI design.

  9. Systematising "System": One Reviewer's Analysis of the Review Process

    Science.gov (United States)

    Coniam, David

    2011-01-01

    This paper describes one reviewer's experience of reviewing for the journal "System" over an eight-year period, 2003-2011. The paper reports on the reviews produced by the single reviewer, which have been compiled into a specific purpose--an "occluded"--corpus (Swales, 1996) of 122 reviews, comprising 93,000 words. The paper first describes the…

  10. [Ecological security of wastewater treatment processes: a review].

    Science.gov (United States)

    Yang, Sai; Hua, Tao

    2013-05-01

    Though the regular indicators of wastewater after treatment can meet the discharge requirements and reuse standards, it doesn't mean the effluent is harmless. From the sustainable point of view, to ensure the ecological and human security, comprehensive toxicity should be considered when discharge standards are set up. In order to improve the ecological security of wastewater treatment processes, toxicity reduction should be considered when selecting and optimizing the treatment processes. This paper reviewed the researches on the ecological security of wastewater treatment processes, with the focus on the purposes of various treatment processes, including the processes for special wastewater treatment, wastewater reuse, and for the safety of receiving waters. Conventional biological treatment combined with advanced oxidation technologies can enhance the toxicity reduction on the base of pollutants removal, which is worthy of further study. For the process aimed at wastewater reuse, the integration of different process units can complement the advantages of both conventional pollutants removal and toxicity reduction. For the process aimed at ecological security of receiving waters, the emphasis should be put on the toxicity reduction optimization of process parameters and process unit selection. Some suggestions for the problems in the current research and future research directions were put forward.

  11. Teaching undergraduates the process of peer review: learning by doing.

    Science.gov (United States)

    Rangachari, P K

    2010-09-01

    An active approach allowed undergraduates in Health Sciences to learn the dynamics of peer review at first hand. A four-stage process was used. In stage 1, students formed self-selected groups to explore specific issues. In stage 2, each group posted their interim reports online on a specific date. Each student read all the other reports and prepared detailed critiques. In stage 3, each report was discussed at sessions where the lead discussant was selected at random. All students participated in the peer review process. The written critiques were collated and returned to each group, who were asked to resubmit their revised reports within 2 wk. In stage 4, final submissions accompanied by rebuttals were graded. Student responses to a questionnaire were highly positive. They recognized the individual steps in the standard peer review, appreciated the complexities involved, and got a first-hand experience of some of the inherent variabilities involved. The absence of formal presentations and the opportunity to read each other's reports permitted them to study issues in greater depth.

  12. Quantum information processing using designed defect states in

    DEFF Research Database (Denmark)

    Pedersen, Jesper; Flindt, Christian; Mortensen, Niels Asger

    2007-01-01

    We propose a new physical implementation of spin qubits for quantum information processing, namely defect states in antidot lattices de¯ned in the two-dimensional electron gas at a semiconductor heterostructure. Calculations of the band structure of the periodic antidot lattice are presented...

  13. State of the art review of biofuels production from lignocellulose by thermophilic bacteria.

    Science.gov (United States)

    Jiang, Yujia; Xin, Fengxue; Lu, Jiasheng; Dong, Weiliang; Zhang, Wenming; Zhang, Min; Wu, Hao; Ma, Jiangfeng; Jiang, Min

    2017-12-01

    Biofuels, including ethanol and butanol, are mainly produced by mesophilic solventogenic yeasts and Clostridium species. However, these microorganisms cannot directly utilize lignocellulosic materials, which are abundant, renewable and non-compete with human demand. More recently, thermophilic bacteria show great potential for biofuels production, which could efficiently degrade lignocellulose through the cost effective consolidated bioprocessing. Especially, it could avoid contamination in the whole process owing to its relatively high fermentation temperature. However, wild types thermophiles generally produce low levels of biofuels, hindering their large scale production. This review comprehensively summarizes the state of the art development of biofuels production by reported thermophilic microorganisms, and also concludes strategies to improve biofuels production including the metabolic pathways construction, co-culturing systems and biofuels tolerance. In addition, strategies to further improve butanol production are proposed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. State-of-the-art review of some artificial intelligence applications in pile foundations

    Institute of Scientific and Technical Information of China (English)

    Mohamed A. Shahin

    2016-01-01

    Geotechnical engineering deals with materials (e.g. soil and rock) that, by their very nature, exhibit varied and uncertain behavior due to the imprecise physical processes associated with the formation of these materials. Modeling the behavior of such materials in geotechnical engineering applications is complex and sometimes beyond the ability of most traditional forms of physically-based engineering methods. Artificial intelligence (AI) is becoming more popular and particularly amenable to modeling the complex behavior of most geotechnical engineering applications because it has demonstrated superior predictive ability compared to traditional methods. This paper provides state-of-the-art review of some selected AI techniques and their applications in pile foundations, and presents the salient features associated with the modeling development of these AI techniques. The paper also discusses the strength and limitations of the selected AI techniques compared to other available modeling approaches.

  15. Animal personality and state-behaviour feedbacks: a review and guide for empiricists.

    Science.gov (United States)

    Sih, Andrew; Mathot, Kimberley J; Moirón, María; Montiglio, Pierre-Olivier; Wolf, Max; Dingemanse, Niels J

    2015-01-01

    An exciting area in behavioural ecology focuses on understanding why animals exhibit consistent among-individual differences in behaviour (animal personalities). Animal personality has been proposed to emerge as an adaptation to individual differences in state variables, leading to the question of why individuals differ consistently in state. Recent theory emphasizes the role that positive feedbacks between state and behaviour can play in producing consistent among-individual covariance between state and behaviour, hence state-dependent personality. We review the role of feedbacks in recent models of adaptive personalities, and provide guidelines for empirical testing of model assumptions and predictions. We discuss the importance of the mediating effects of ecology on these feedbacks, and provide a roadmap for including state-behaviour feedbacks in behavioural ecology research. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Toward Cognitively Constrained Models of Language Processing: A Review

    Directory of Open Access Journals (Sweden)

    Margreet Vogelzang

    2017-09-01

    Full Text Available Language processing is not an isolated capacity, but is embedded in other aspects of our cognition. However, it is still largely unexplored to what extent and how language processing interacts with general cognitive resources. This question can be investigated with cognitively constrained computational models, which simulate the cognitive processes involved in language processing. The theoretical claims implemented in cognitive models interact with general architectural constraints such as memory limitations. This way, it generates new predictions that can be tested in experiments, thus generating new data that can give rise to new theoretical insights. This theory-model-experiment cycle is a promising method for investigating aspects of language processing that are difficult to investigate with more traditional experimental techniques. This review specifically examines the language processing models of Lewis and Vasishth (2005, Reitter et al. (2011, and Van Rij et al. (2010, all implemented in the cognitive architecture Adaptive Control of Thought—Rational (Anderson et al., 2004. These models are all limited by the assumptions about cognitive capacities provided by the cognitive architecture, but use different linguistic approaches. Because of this, their comparison provides insight into the extent to which assumptions about general cognitive resources influence concretely implemented models of linguistic competence. For example, the sheer speed and accuracy of human language processing is a current challenge in the field of cognitive modeling, as it does not seem to adhere to the same memory and processing capacities that have been found in other cognitive processes. Architecture-based cognitive models of language processing may be able to make explicit which language-specific resources are needed to acquire and process natural language. The review sheds light on cognitively constrained models of language processing from two angles: we

  17. Process variables in organizational stress management intervention evaluation research: a systematic review

    NARCIS (Netherlands)

    Havermans, B.M.; Schelvis, R.M.C.; Boot, C.R.L.; Brouwers, E.P.M.; Anema, J.R.; Beek, A.J. van der

    2016-01-01

    Objectives This systematic review aimed to explore which process variables are used in stress management intervention (SMI) evaluation research. Methods A systematic review was conducted using seven electronic databases. Studies were included if they reported on an SMI aimed at primary or secondary

  18. Process variables in organizational stress management intervention evaluation research : A systematic review

    NARCIS (Netherlands)

    Havermans, B.M.; Schlevis, Roosmarijn Mc; Boot, Cécile Rl; Brouwers, E.P.M.; Anema, Johannes R; van der Beek, Allard J

    2016-01-01

    OBJECTIVES: This systematic review aimed to explore which process variables are used in stress management intervention (SMI) evaluation research. METHODS: A systematic review was conducted using seven electronic databases. Studies were included if they reported on an SMI aimed at primary or

  19. Disturbance and climate change in United States/Mexico borderland plant communities: a state-of-the-knowledge review

    Science.gov (United States)

    Guy R. McPherson; Jake F. Weltzin

    2000-01-01

    This review evaluates the effects and importance of disturbance and climate change on plant community dynamics in the United States/Mexico borderlands region. Our primary focus is on knowledge of physiognomic-level change in grasslands and woodlands of southeastern Arizona and southwestern New Mexico. Changes in vegetation physiognomy have broad implications for...

  20. Procedural justice in wind facility siting: Recommendations for state-led siting processes

    International Nuclear Information System (INIS)

    Ottinger, Gwen; Hargrave, Timothy J.; Hopson, Eric

    2014-01-01

    Evidence suggests that state control of wind facility siting decisions fosters new project development more effectively than local control, yet the literature suggests that affected citizens tend to be more fairly represented in local siting processes. We argue that successful renewable energy policy must satisfy both the need for new project development and the obligation to procedural justice. To suggest how it can do so, we analyze existing state- and county-level siting processes in Washington state, finding that both fall short on measures of procedural justice. To overcome this limitation and address the tension between procedural justice and project development, we then propose a collaborative governance approach to wind facility siting, in which state governments retain ultimate authority over permitting decisions but encourage and support local-level deliberations as the primary means of making those decisions. Such an approach, we argue, would be more just, facilitate wind development by addressing community concerns constructively and result in better projects through the input of diverse stakeholders. - Highlights: • States have made wind energy development a priority. • Local opposition to new projects could hinder future wind energy development. • Procedural justice is necessary to resolve local issues and ensure timely wind facility siting. • Both state- and county-led siting processes fall short with respect to criteria for procedural justice, though local processes have some advantages. • States could instead induce counties, developers to engage in deliberation

  1. Energy policies of IEA countries: United States - 2007 review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-02-15

    The United States is the largest economy and energy user in the world. Significant developments have taken place in its energy policy since the last IEA review in 2002. Most important is the Energy Policy Act 2005 - a comprehensive energy legislation which has set new directions, including opening the way for a nuclear renaissance. Two closely connected challenges shape all debates on the nation's energy policy path: how to increase security by reducing the dependence on imported supplies; and how to address growing emissions of greenhouse gases. The United States national strategy is to find solutions largely through technology. It is a world leader in R&D and is driving development of carbon capture and storage and second-generation biofuels. But thus far, no federal government policy is in place to establish as a target an absolute reduction of CO2 emissions. The resulting uncertainty risks holding back investments into new technologies and may delay projects that are urgently required. The transport sector will be a key to a sustainable success. In the short to medium term, reduced fuel demand through higher vehicle efficiency will increase security and reduce CO2 emissions. Yet the policy for the revision of CAFE (the corporate average fuel economy) standards will leave consumers with vehicles that fall short of the technological possibilities. This review takes an in-depth look at these issues and provides recommendations on how the United States can do more to answer the challenges of both improving its security of energy supply and lowering its emissions intensity, demonstrating the significant improvements that can already be realised through existing technologies.

  2. Energy policies of IEA countries: United States - 2007 review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-02-15

    The United States is the largest economy and energy user in the world. Significant developments have taken place in its energy policy since the last IEA review in 2002. Most important is the Energy Policy Act 2005 - a comprehensive energy legislation which has set new directions, including opening the way for a nuclear renaissance. Two closely connected challenges shape all debates on the nation's energy policy path: how to increase security by reducing the dependence on imported supplies; and how to address growing emissions of greenhouse gases. The United States national strategy is to find solutions largely through technology. It is a world leader in R&D and is driving development of carbon capture and storage and second-generation biofuels. But thus far, no federal government policy is in place to establish as a target an absolute reduction of CO2 emissions. The resulting uncertainty risks holding back investments into new technologies and may delay projects that are urgently required. The transport sector will be a key to a sustainable success. In the short to medium term, reduced fuel demand through higher vehicle efficiency will increase security and reduce CO2 emissions. Yet the policy for the revision of CAFE (the corporate average fuel economy) standards will leave consumers with vehicles that fall short of the technological possibilities. This review takes an in-depth look at these issues and provides recommendations on how the United States can do more to answer the challenges of both improving its security of energy supply and lowering its emissions intensity, demonstrating the significant improvements that can already be realised through existing technologies.

  3. Current status of solid waste management in small island developing states: A review

    International Nuclear Information System (INIS)

    Mohee, Romeela; Mauthoor, Sumayya; Bundhoo, Zumar M.A.; Somaroo, Geeta; Soobhany, Nuhaa; Gunasee, Sanjana

    2015-01-01

    Highlights: • Waste management is a matter of great concern for small island developing states. • On average, waste generation rate in these islands amounts to 1.29 kg/capita/day. • Illegal dumping and landfilling prevail in most small island developing states. • Sustainable waste management practices, previously absent, are now emerging. • However, many challenges still hinder the implementation of these practices. - Abstract: This article reviews the current status of waste management in Small Island Developing States (SIDS) and the challenges that are faced in solid waste management. The waste generation rates of SIDS were compared within the three geographic regions namely Caribbean SIDS, Pacific SIDS and Atlantic, Indian Ocean, Mediterranean and South China (AIMS) SIDS and with countries of the Organisation for Economic Co-Operation and Development (OECD). Only Pacific SIDS had a waste generation rate less than 1 kg/capita/day. The waste generation rates for the three SIDS regions averaged 1.29 kg/capita/day while that for OECD countries was at a mean value of 1.35 kg/capita/day. The waste compositions in the different SIDS regions were almost similar owing to comparable consumption patterns while these differed to a large extent with wastes generated in OECD countries. In SIDS, the major fraction of MSW comprised of organics (44%) followed by recyclables namely paper, plastics, glass and metals (total: 43%). In contrast, MSW in OECD countries consisted mainly of recyclables (43%) followed by organics (37%). This article also reviewed the other functional elements of the waste management systems in SIDS. Several shortcomings were noted in the process of waste collection, transfer and transport namely the fact of having outdated collection vehicles and narrow roads which are inaccessible. Among the waste management practices in SIDS, waste disposal via landfilling, illegal dumping and backyard burning were favoured most of the time at the expense of

  4. Current status of solid waste management in small island developing states: A review

    Energy Technology Data Exchange (ETDEWEB)

    Mohee, Romeela [University of Mauritius, Réduit (Mauritius); Mauthoor, Sumayya, E-mail: sumayya.mauthoor@umail.uom.ac.mu [Department of Chemical & Environmental Engineering, University of Mauritius, Réduit (Mauritius); Bundhoo, Zumar M.A.; Somaroo, Geeta; Soobhany, Nuhaa; Gunasee, Sanjana [Department of Chemical & Environmental Engineering, University of Mauritius, Réduit (Mauritius)

    2015-09-15

    Highlights: • Waste management is a matter of great concern for small island developing states. • On average, waste generation rate in these islands amounts to 1.29 kg/capita/day. • Illegal dumping and landfilling prevail in most small island developing states. • Sustainable waste management practices, previously absent, are now emerging. • However, many challenges still hinder the implementation of these practices. - Abstract: This article reviews the current status of waste management in Small Island Developing States (SIDS) and the challenges that are faced in solid waste management. The waste generation rates of SIDS were compared within the three geographic regions namely Caribbean SIDS, Pacific SIDS and Atlantic, Indian Ocean, Mediterranean and South China (AIMS) SIDS and with countries of the Organisation for Economic Co-Operation and Development (OECD). Only Pacific SIDS had a waste generation rate less than 1 kg/capita/day. The waste generation rates for the three SIDS regions averaged 1.29 kg/capita/day while that for OECD countries was at a mean value of 1.35 kg/capita/day. The waste compositions in the different SIDS regions were almost similar owing to comparable consumption patterns while these differed to a large extent with wastes generated in OECD countries. In SIDS, the major fraction of MSW comprised of organics (44%) followed by recyclables namely paper, plastics, glass and metals (total: 43%). In contrast, MSW in OECD countries consisted mainly of recyclables (43%) followed by organics (37%). This article also reviewed the other functional elements of the waste management systems in SIDS. Several shortcomings were noted in the process of waste collection, transfer and transport namely the fact of having outdated collection vehicles and narrow roads which are inaccessible. Among the waste management practices in SIDS, waste disposal via landfilling, illegal dumping and backyard burning were favoured most of the time at the expense of

  5. 22 CFR 92.92 - Service of legal process under provisions of State law.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Service of legal process under provisions of... AND RELATED SERVICES Quasi-Legal Services § 92.92 Service of legal process under provisions of State law. It may be found that a State statue purporting to regulate the service of process in foreign...

  6. Process innovation in tourism management: A review of the literature

    Directory of Open Access Journals (Sweden)

    Irma Elia Damian

    2015-06-01

    Full Text Available Purpose: Identifying gaps in the academic literature regarding three great management topics: Process Innovation, Tourism Management and Process Innovation in Tourism Management in order to establish the conceptual framework and identify future lines of research. Design/methodology: For this research, a systematic review was conducted on items obtained from accredited databases recognized as EBSCO, OECD, among others, the literature on Process Innovation, Tourism Management and Process Innovation in Tourism Management. Findings: As a result of this review the opportunity for academic research was identified, this due to a theoretical gap which exists on the subject of Process Innovation in Tourism Management. Research limitations/implications: For the realization of this research the databases used were: EBSCO, Emerald, OECD, ProQuest and Scientific Research. The authors are aware that there may be other papers of the subject that were not considered in this article. Practical implications: Following this research the road to research other issues is opened, such as: what impact does it have and how do Process Innovations in Tourism Management are carried along in organizations belonging to Sector Originality/value: The knowledge of how process innovation in tourism management occurs in hospitality organizations gives a better understanding and comprehension of this subjects opening the possibility, for other organizations, of adopting and adapting them in areas related to customer satisfaction, improvement of the image of the organization and quality of the service offered.

  7. Disorder effects in topological states: Brief review of the recent developments

    Science.gov (United States)

    Wu, Binglan; Song, Juntao; Zhou, Jiaojiao; Jiang, Hua

    2016-11-01

    Disorder inevitably exists in realistic samples, manifesting itself in various exotic properties for the topological states. In this paper, we summarize and briefly review the work completed over the last few years, including our own, regarding recent developments in several topics about disorder effects in topological states. For weak disorder, the robustness of topological states is demonstrated, especially for both quantum spin Hall states with Z 2 = 1 and size induced nontrivial topological insulators with Z 2 = 0. For moderate disorder, by increasing the randomness of both the impurity distribution and the impurity induced potential, the topological insulator states can be created from normal metallic or insulating states. These phenomena and their mechanisms are summarized. For strong disorder, the disorder causes a metal-insulator transition. Due to their topological nature, the phase diagrams are much richer in topological state systems. Finally, the trends in these areas of disorder research are discussed. Project supported by the National Natural Science Foundation of China (Grant Nos. 11374219, 11474085, and 11534001) and the Natural Science Foundation of Jiangsu Province, China (Grant No BK20160007).

  8. Judicial Review: Issues of State Court Involvement in School Finance Litigation.

    Science.gov (United States)

    Colwell, William Bradley

    1998-01-01

    Due to state legislatures' reluctance to initiate school-funding reform, judicial bodies are asked to provide relief from alleged inequities. Before providing judicial review, the judiciary must decide whether an issue is justiciable (does not violate separation of powers) and warrants court intervention. Children's education has not substantially…

  9. 7 CFR 1940.316 - Responsible officials for the environmental review process.

    Science.gov (United States)

    2010-01-01

    ... submitted to the approval official for final determinations. The SEC will review the assessment and provide... adequacy of the assessment or the recommendations reached, the State Director, whether or not the approving... Law 103-354 official responsible for executing the environmental impact determination and...

  10. 42 CFR 483.108 - Relationship of PASARR to other Medicaid processes.

    Science.gov (United States)

    2010-10-01

    ... mental health or mental retardation authorities cannot be countermanded by the State Medicaid agency, either in the claims process or through other utilization control/review processes or by the State survey... of this part may overturn a PASARR determination made by the State mental health or mental...

  11. 25 CFR 170.501 - What happens when the review process identifies areas for improvement?

    Science.gov (United States)

    2010-04-01

    ... identifies areas for improvement? When the review process identifies areas for improvement: (a) The regional... 25 Indians 1 2010-04-01 2010-04-01 false What happens when the review process identifies areas for improvement? 170.501 Section 170.501 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND...

  12. The State of the Process of Decentralisation in Cameroon | Cheka ...

    African Journals Online (AJOL)

    The pace of the process of decentralisation in a given context unavoidably depends on the degree of favourableness of the legal environment and the dynamism of stakeholders (especially of local authorities, the state, development cooperation partners and civil society). This paper seeks to inform on the state of the ...

  13. Data Analytics in CRM Processes: A Literature Review

    Directory of Open Access Journals (Sweden)

    Gončarovs Pāvels

    2017-12-01

    Full Text Available Nowadays, the data scarcity problem has been supplanted by the data deluge problem. Marketers and Customer Relationship Management (CRM specialists have access to rich data on consumer behaviour. The current challenge is effective utilisation of these data in CRM processes and selection of appropriate data analytics techniques. Data analytics techniques help find hidden patterns in data. The present paper explores the characteristics of data analytics as the integrated tool in CRM for sales managers. The paper aims at analysing some of the different analytics methods and tools which can be used for continuous improvement of CRM processes. A systematic literature has been conducted to achieve this goal. The results of the review highlight the most frequently considered CRM processes in the context of data analytics.

  14. Directory of gamma processing facilities in Member States

    International Nuclear Information System (INIS)

    2004-02-01

    Ionizing radiation can modify physical, chemical and biological properties of materials. This characteristic of radiation was recognised very soon after the discovery of radioactivity. At present, the principal applications concern sterilisation of health care products, food irradiation and materials modification for polymers. Besides naturally occurring radioactive isotopes, artificial ones were produced using cyclotrons. A significant impetus, however, was given to the radiation processing industry with the advent of nuclear reactors, which were used to produce radioisotopes. Gamma ray emitters like cobalt-60 became popular radiation sources for medical and industrial applications. Many gamma ray irradiators have been built and it is estimated that less than 200 are currently in operation all over the world. In recent times, the use of electron accelerators as a radiation source (sometimes equipped with X ray converter) is increasing. However, gamma irradiators are difficult to replace, especially in the case of non-uniform and high-density products. The International Atomic Energy Agency (IAEA) has several programmes related to industrial irradiation applications for processing of various products including those related to health care, pharmaceuticals, food and polymers, and applications associated with plant design, dosimetry and safety. Through the technical co-operation programme, the IAEA supports these activities in developing countries and helps them to build local capacity to implement various industrial applications of radiation processing. The IAEA also organises and conducts training courses and workshops, provides individual training to personnel, and sends experts to the radiation facilities in Member States where help is needed. All these activities can be carried out much more efficiently and effectively if there were a comprehensive directory of radiation facilities operating in Member States. Also, such a compilation would be a valuable tool for

  15. State Space Reduction of Linear Processes using Control Flow Reconstruction

    NARCIS (Netherlands)

    van de Pol, Jan Cornelis; Timmer, Mark

    2009-01-01

    We present a new method for fighting the state space explosion of process algebraic specifications, by performing static analysis on an intermediate format: linear process equations (LPEs). Our method consists of two steps: (1) we reconstruct the LPE's control flow, detecting control flow parameters

  16. State Space Reduction of Linear Processes Using Control Flow Reconstruction

    NARCIS (Netherlands)

    van de Pol, Jan Cornelis; Timmer, Mark; Liu, Zhiming; Ravn, Anders P.

    2009-01-01

    We present a new method for fighting the state space explosion of process algebraic specifications, by performing static analysis on an intermediate format: linear process equations (LPEs). Our method consists of two steps: (1) we reconstruct the LPE's control flow, detecting control flow parameters

  17. States with stronger health insurance rate review authority experienced lower premiums in the individual market in 2010-13.

    Science.gov (United States)

    Karaca-Mandic, Pinar; Fulton, Brent D; Hollingshead, Ann; Scheffler, Richard M

    2015-08-01

    States have varying degrees of review authority over health insurance carriers' rates, including prior approval authority over proposed rates and requirements for loss ratios, the proportion of premium revenues spent on medical claims. The Affordable Care Act (ACA) requires carriers in certain categories of health insurance to provide public justification for rate increases of 10 percent or more. We collected data on how states changed their rate review authority and requirements during 2010-13, the years immediately after enactment of the ACA, and we combined these data with carrier filings. We found that adjusted premiums in the individual market in states that had prior-approval authority combined with loss ratio requirements were lower in 2010-13 ($3,489) than premiums in states with no rate review authority or that had only file-and-use regulations, which gave the states no authority to block rate increases ($3,617). Adjusted premiums declined modestly in prior-approval states with loss ratio requirements, from $3,526 in 2010 to $3,452 in 2013, while premiums increased from $3,422 to $3,683 in states with no rate review authority or file-and-use regulations only. Our findings suggest that states with prior approval authority and loss ratio requirements constrained health insurance premium increases. Project HOPE—The People-to-People Health Foundation, Inc.

  18. Process variables in organizational stress management intervention evaluation research: a systematic review.

    Science.gov (United States)

    Havermans, Bo M; Schlevis, Roosmarijn Mc; Boot, Cécile Rl; Brouwers, Evelien Pm; Anema, Johannes; van der Beek, Allard J

    2016-09-01

    This systematic review aimed to explore which process variables are used in stress management intervention (SMI) evaluation research. A systematic review was conducted using seven electronic databases. Studies were included if they reported on an SMI aimed at primary or secondary stress prevention, were directed at paid employees, and reported process data. Two independent researchers checked all records and selected the articles for inclusion. Nielsen and Randall's model for process evaluation was used to cluster the process variables. The three main clusters were context, intervention, and mental models. In the 44 articles included, 47 process variables were found, clustered into three main categories: context (two variables), intervention (31 variables), and mental models (14 variables). Half of the articles contained no reference to process evaluation literature. The collection of process evaluation data mostly took place after the intervention and at the level of the employee. The findings suggest that there is great heterogeneity in methods and process variables used in process evaluations of SMI. This, together with the lack of use of a standardized framework for evaluation, hinders the advancement of process evaluation theory development.

  19. LITERATURE REVIEW FOR OXALATE OXIDATION PROCESSES AND PLUTONIUM OXALATE SOLUBILITY

    Energy Technology Data Exchange (ETDEWEB)

    Nash, C.

    2012-02-03

    A literature review of oxalate oxidation processes finds that manganese(II)-catalyzed nitric acid oxidation of oxalate in precipitate filtrate is a viable and well-documented process. The process has been operated on the large scale at Savannah River in the past, including oxidation of 20 tons of oxalic acid in F-Canyon. Research data under a variety of conditions show the process to be robust. This process is recommended for oxalate destruction in H-Canyon in the upcoming program to produce feed for the MOX facility. Prevention of plutonium oxalate precipitation in filtrate can be achieved by concentrated nitric acid/ferric nitrate sequestration of oxalate. Organic complexants do not appear practical to sequester plutonium. Testing is proposed to confirm the literature and calculation findings of this review at projected operating conditions for the upcoming campaign. H Canyon plans to commence conversion of plutonium metal to low-fired plutonium oxide in 2012 for eventual use in the Mixed Oxide Fuel (MOX) Facility. The flowsheet includes sequential operations of metal dissolution, ion exchange, elution, oxalate precipitation, filtration, and calcination. All processes beyond dissolution will occur in HB-Line. The filtration step produces an aqueous filtrate that may have as much as 4 M nitric acid and 0.15 M oxalate. The oxalate needs to be removed from the stream to prevent possible downstream precipitation of residual plutonium when the solution is processed in H Canyon. In addition, sending the oxalate to the waste tank farm is undesirable. This report addresses the processing options for destroying the oxalate in existing H Canyon equipment.

  20. Thermal Stir Welding: A New Solid State Welding Process

    Science.gov (United States)

    Ding, R. Jeffrey

    2003-01-01

    Thermal stir welding is a new welding process developed at NASA's Marshall Space Flight Center in Huntsville, AL. Thermal stir welding is similar to friction stir welding in that it joins similar or dissimilar materials without melting the parent material. However, unlike friction stir welding, the heating, stirring and forging elements of the process are all independent of each other and are separately controlled. Furthermore, the heating element of the process can be either a solid-state process (such as a thermal blanket, induction type process, etc), or, a fusion process (YG laser, plasma torch, etc.) The separation of the heating, stirring, forging elements of the process allows more degrees of freedom for greater process control. This paper introduces the mechanics of the thermal stir welding process. In addition, weld mechanical property data is presented for selected alloys as well as metallurgical analysis.

  1. Review of Palm Kernel Oil Processing And Storage Techniques In South East Nigeria

    Directory of Open Access Journals (Sweden)

    Okeke CG

    2017-06-01

    Full Text Available An assessment of palm kernel processing and storage in South-Eastern Nigeria was carried out by investigative survey approach. The survey basically ascertained the extent of mechanization applicable in the area to enable the palm kernel processors and agricultural policy makers, device the modalities for improving palm kernel processing in the area. According to the results obtained from the study, in Abia state, 85% of the respondents use mechanical method while 15% use manual method in cracking their kernels. In Imo state, 83% of the processors use mechanical method while 17% use manual method. In Enugu and Ebonyi state, 70% and 50% of the processors respectively use mechanical method. It is only in Anambra state that greater number of the processors (50% use manual method while 45% use mechanical means. It is observable from the results that palm kernel oil extraction has not received much attention in mechanization. The ANOVA of the palm kernel oil extraction technique in South- East Nigeria showed significant difference in both the study area and oil extraction techniques at 5% level of probability. Results further revealed that in Abia State, 70% of the processors use complete fractional process in refining the palm kernel oil; 25% and 5% respectively use incomplete fractional process and zero refining process. In Anambra, 60% of the processors use complete fractional process and 40% use incomplete fractional process. Zero refining method is not applicable in Anambra state. In Enugu sate, 53% use complete fractional process while 25% and 22% respectively use zero refining and incomplete fractional process in refining the palm kernel oil. Imo state, mostly use complete fractional process (85% in refining palm kernel oil. About 10% use zero refining method while 5% of the processors use incomplete fractional process. Plastic containers and metal drums are dominantly used in most areas in south-east Nigeria for the storage of palm kernel oil.

  2. A systematic review of stated preference studies reporting public preferences for healthcare priority setting.

    Science.gov (United States)

    Whitty, Jennifer A; Lancsar, Emily; Rixon, Kylie; Golenko, Xanthe; Ratcliffe, Julie

    2014-01-01

    There is current interest in incorporating weights based on public preferences for health and healthcare into priority-setting decisions. The aim of this systematic review was to explore the extent to which public preferences and trade-offs for priority-setting criteria have been quantified, and to describe the study contexts and preference elicitation methods employed. A systematic review was performed in April 2013 to identify empirical studies eliciting the stated preferences of the public for the provision of healthcare in a priority-setting context. Studies are described in terms of (i) the stated preference approaches used, (ii) the priority-setting levels and contexts, and (iii) the criteria identified as important and their relative importance. Thirty-nine studies applying 40 elicitation methods reported in 41 papers met the inclusion criteria. The discrete choice experiment method was most commonly applied (n = 18, 45.0 %), but other approaches, including contingent valuation and the person trade-off, were also used. Studies prioritised health systems (n = 4, 10.2 %), policies/programmes/services/interventions (n = 16, 41.0 %), or patient groups (n = 19, 48.7 %). Studies generally confirmed the importance of a wide range of process, non-health and patient-related characteristics in priority setting in selected contexts, alongside health outcomes. However, inconsistencies were observed for the relative importance of some prioritisation criteria, suggesting context and/or elicitation approach matter. Overall, findings suggest caution in directly incorporating public preferences as weights for priority setting unless the methods used to elicit the weights can be shown to be appropriate and robust in the priority-setting context.

  3. Establishment of database and network for research of stream generator and state of the art technology review

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jae Bong; Hur, Nam Su; Moon, Seong In; Seo, Hyeong Won; Park, Bo Kyu; Park, Sung Ho; Kim, Hyung Geun [Sungkyunkwan Univ., Seoul (Korea, Republic of)

    2004-02-15

    A significant number of steam generator tubes are defective and are removed from service or repaired world widely. This wide spread damage has been caused by diverse degradation mechanisms, some of which are difficult to detect and predict. Regarding domestic nuclear power plants, also, the increase of number of operating nuclear power plants and operating periods may result in the increase of steam generator tube failure. So, it is important to carry out the integrity evaluation process to prevent the steam generator tube damage. There are two objectives of this research. The one is to make database for the research of steam generator at domestic research institution. It will increase the efficiency and capability of limited domestic research resources by sharing data and information through network organization. Also, it will enhance the current standard of integrity evaluation procedure that is considerably conservative but can be more reasonable. The second objective is to establish the standard integrity evaluation procedure for steam generator tube by reviewing state of the art technology. The research resources related to steam generator tubes are managed by the established web-based database system. The following topics are covered in this project: development of web-based network for research on steam generator tubes review of state of the art technology.

  4. Establishment of database and network for research of stream generator and state of the art technology review

    International Nuclear Information System (INIS)

    Choi, Jae Bong; Hur, Nam Su; Moon, Seong In; Seo, Hyeong Won; Park, Bo Kyu; Park, Sung Ho; Kim, Hyung Geun

    2004-02-01

    A significant number of steam generator tubes are defective and are removed from service or repaired world widely. This wide spread damage has been caused by diverse degradation mechanisms, some of which are difficult to detect and predict. Regarding domestic nuclear power plants, also, the increase of number of operating nuclear power plants and operating periods may result in the increase of steam generator tube failure. So, it is important to carry out the integrity evaluation process to prevent the steam generator tube damage. There are two objectives of this research. The one is to make database for the research of steam generator at domestic research institution. It will increase the efficiency and capability of limited domestic research resources by sharing data and information through network organization. Also, it will enhance the current standard of integrity evaluation procedure that is considerably conservative but can be more reasonable. The second objective is to establish the standard integrity evaluation procedure for steam generator tube by reviewing state of the art technology. The research resources related to steam generator tubes are managed by the established web-based database system. The following topics are covered in this project: development of web-based network for research on steam generator tubes review of state of the art technology

  5. Review on biofuel oil and gas production processes from microalgae

    International Nuclear Information System (INIS)

    Amin, Sarmidi

    2009-01-01

    Microalgae, as biomass, are a potential source of renewable energy, and they can be converted into energy such as biofuel oil and gas. This paper presents a brief review on the main conversion processes of microalgae becoming energy. Since microalgae have high water content, not all biomass energy conversion processes can be applied. By using thermochemical processes, oil and gas can be produced, and by using biochemical processes, ethanol and biodiesel can be produced. The properties of the microalgae product are almost similar to those of offish and vegetable oils, and therefore, it can be considered as a substitute of fossil oil.

  6. Social Justice in Outdoor Experiential Education: A State of Knowledge Review

    Science.gov (United States)

    Warren, Karen; Roberts, Nina S.; Breunig, Mary; Alvarez, M. Antonio G.

    2014-01-01

    Outdoor experiential education has often been critiqued for its White, male, middle/upper-class, able-bodied history, thereby causing professionals and programs to consider issues of social justice. This state of knowledge paper will review the literature on social and environmental justice, identify gaps in current social justice literature and…

  7. Review of desulfurization process for biogas purification

    Science.gov (United States)

    Xiao, Cong; Ma, Yunqian; Ji, Dandan; Zang, Lihua

    2017-12-01

    Hydrogen sulfide (H2S) is a toxic and odorous compound present in biogas produced by the anaerobic digestion of biosolids and other organic materials. Elimination of H2S is necessary as it is extremely hazardous to human health, poisonous to process catalysts and corrosive to equipment. The desulfurization technology is an important part for efficient utilization of biogas. In this paper, the traditional wet and dry desulfurization technology for biogas was reviewed, and the new research progress of biological desulfurization technologies are also introduced.

  8. Extrusion Processing of Raw Food Materials and by-products: A Review.

    Science.gov (United States)

    Offiah, Vivian; Kontogiorgos, Vassilis; Falade, Kolawole O

    2018-05-22

    Extrusion technology has rapidly transformed the food industry with its numerous advantages over other processing methods. It offers a platform for processing different products from various food groups by modifying minor or major ingredients and processing conditions. Although cereals occupy a large portion of the extruded foods market, several other types of raw materials have been used. Extrusion processing of various food groups, including cereals and pseudo cereals, roots and tubers, pulses and oilseeds, fruits and vegetables, and animal products, as well as structural and nutritional changes in these food matrices are reviewed. Value addition by extrusion to food processing wastes and by-products from fruits and vegetables, dairy, meat and seafood, cereals and residues from starch, syrup and alcohol production, and oilseed processing are also discussed. Extrusion presents an economical technology for incorporating food processing residues and by-products back into the food stream. In contemporary scenarios, rising demand for extruded products with functional ingredients, attributed to evolving lifestyles and preferences, have led to innovations in the form, texture, color and content of extruded products. Information presented in this review would be of importance to processors and researchers as they seek to enhance nutritional quality and delivery of extruded products.

  9. Processing, Valorization and Application of Bio-Waste Derived Compounds from Potato, Tomato, Olive and Cereals: A Review

    Directory of Open Access Journals (Sweden)

    Caroline Fritsch

    2017-08-01

    Full Text Available The vast and ever-growing amount of agricultural and food wastes has become a major concern throughout the whole world. Therefore, strategies for their processing and value-added reuse are needed to enable a sustainable utilization of feedstocks and reduce the environmental burden. By-products of potato, tomato, cereals and olive arise in significant amounts in European countries and are consequently of high relevance. Due to their composition with various beneficial ingredients, the waste products can be valorized by different techniques leading to economic and environmental advantages. This paper focuses on the waste generation during industrial processing of potato, tomato, cereals and olives within the European Union and reviews state-of-the-art technologies for their valorization. Furthermore, current applications, future perspectives and challenges are discussed.

  10. Computer Vision and Image Processing: A Paper Review

    Directory of Open Access Journals (Sweden)

    victor - wiley

    2018-02-01

    Full Text Available Computer vision has been studied from many persective. It expands from raw data recording into techniques and ideas combining digital image processing, pattern recognition, machine learning and computer graphics. The wide usage has attracted many scholars to integrate with many disciplines and fields. This paper provide a survey of the recent technologies and theoretical concept explaining the development of computer vision especially related to image processing using different areas of their field application. Computer vision helps scholars to analyze images and video to obtain necessary information,    understand information on events or descriptions, and scenic pattern. It used method of multi-range application domain with massive data analysis. This paper provides contribution of recent development on reviews related to computer vision, image processing, and their related studies. We categorized the computer vision mainstream into four group e.g., image processing, object recognition, and machine learning. We also provide brief explanation on the up-to-date information about the techniques and their performance.

  11. The inverse Gamma process: A family of continuous stochastic models for describing state-dependent deterioration phenomena

    International Nuclear Information System (INIS)

    Guida, M.; Pulcini, G.

    2013-01-01

    This paper proposes the family of non-stationary inverse Gamma processes for modeling state-dependent deterioration processes with nonlinear trend. The proposed family of processes, which is based on the assumption that the “inverse” time process is Gamma, is mathematically more tractable than previously proposed state-dependent processes, because, unlike the previous models, the inverse Gamma process is a time-continuous and state-continuous model and does not require discretization of time and state. The conditional distribution of the deterioration growth over a generic time interval, the conditional distribution of the residual life and the residual reliability of the unit, given the current state, are provided. Point and interval estimation of the parameters which index the proposed process, as well as of several quantities of interest, are also discussed. Finally, the proposed model is applied to the wear process of the liners of some Diesel engines which was previously analyzed and proved to be a purely state-dependent process. The comparison of the inferential results obtained under the competitor models shows the ability of the Inverse Gamma process to adequately model the observed state-dependent wear process

  12. Recurrent Artificial Neural Networks and Finite State Natural Language Processing.

    Science.gov (United States)

    Moisl, Hermann

    It is argued that pessimistic assessments of the adequacy of artificial neural networks (ANNs) for natural language processing (NLP) on the grounds that they have a finite state architecture are unjustified, and that their adequacy in this regard is an empirical issue. First, arguments that counter standard objections to finite state NLP on the…

  13. A review of breast tomosynthesis. Part I. The image acquisition process

    Science.gov (United States)

    Sechopoulos, Ioannis

    2013-01-01

    Mammography is a very well-established imaging modality for the early detection and diagnosis of breast cancer. However, since the introduction of digital imaging to the realm of radiology, more advanced, and especially tomographic imaging methods have been made possible. One of these methods, breast tomosynthesis, has finally been introduced to the clinic for routine everyday use, with potential to in the future replace mammography for screening for breast cancer. In this two part paper, the extensive research performed during the development of breast tomosynthesis is reviewed, with a focus on the research addressing the medical physics aspects of this imaging modality. This first paper will review the research performed on the issues relevant to the image acquisition process, including system design, optimization of geometry and technique, x-ray scatter, and radiation dose. The companion to this paper will review all other aspects of breast tomosynthesis imaging, including the reconstruction process. PMID:23298126

  14. Combined Audience and Video Feedback With Cognitive Review Improves State Anxiety and Self-Perceptions During Speech Tasks in Socially Anxious Individuals.

    Science.gov (United States)

    Chen, Junwen; McLean, Jordan E; Kemps, Eva

    2018-03-01

    This study investigated the effects of combined audience feedback with video feedback plus cognitive preparation, and cognitive review (enabling deeper processing of feedback) on state anxiety and self-perceptions including perception of performance and perceived probability of negative evaluation in socially anxious individuals during a speech performance. One hundred and forty socially anxious students were randomly assigned to four conditions: Cognitive Preparation + Video Feedback + Audience Feedback + Cognitive Review (CP+VF+AF+CR), Cognitive Preparation + Video Feedback + Cognitive Review (CP+VF+CR), Cognitive Preparation + Video Feedback only (CP+VF), and Control. They were asked to deliver two impromptu speeches that were evaluated by confederates. Participants' levels of anxiety and self-perceptions pertaining to the speech task were assessed before and after feedback, and after the second speech. Compared to participants in the other conditions, participants in the CP+VF+AF+CR condition reported a significant decrease in their state anxiety and perceived probability of negative evaluation scores, and a significant increase in their positive perception of speech performance from before to after the feedback. These effects generalized to the second speech. Our results suggest that adding audience feedback to video feedback plus cognitive preparation and cognitive review may improve the effects of existing video feedback procedures in reducing anxiety symptoms and distorted self-representations in socially anxious individuals. Copyright © 2017. Published by Elsevier Ltd.

  15. ALARA Design Review for the Resumption of the Plutonium Finishing Plant (PFP) Cementation Process Project Activities

    CERN Document Server

    Dayley, L

    2000-01-01

    The requirements for the performance of radiological design reviews are codified in 10CFR835, Occupational Radiation Protection. The basic requirements for the performance of ALARA design reviews are presented in the Hanford Site Radiological Control Manual (HSRCM). The HSRCM has established trigger levels requiring radiological reviews of non-routine or complex work activities. These requirements are implemented in site procedures HNF-PRO-1622 and 1623. HNF-PRO-1622 Radiological Design Review Process requires that ''radiological design reviews [be performed] of new facilities and equipment and modifications of existing facilities and equipment''. In addition, HNF-PRO-1623 Radiological Work Planning Process requires a formal ALARA Review for planned activities that are estimated to exceed 1 person-rem total Dose Equivalent (DE). The purpose of this review is to validate that the original design for the PFP Cementation Process ensures that the principles of ALARA (As Low As Reasonably Achievable) were included...

  16. 42 CFR 457.170 - Withdrawal process.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Withdrawal process. 457.170 Section 457.170 Public... Plans for Child Health Insurance Programs and Outreach Strategies § 457.170 Withdrawal process. (a... amendment, or any portion of a proposed State plan or plan amendment, at any time during the review process...

  17. Facilitating a More Efficient Commercial Review Process for Pediatric Drugs and Biologics

    Directory of Open Access Journals (Sweden)

    Ryan D. Rykhus

    2017-12-01

    Full Text Available Over the past two decades, the biopharmaceutical industry has seen unprecedented expansion and innovation in concert with significant technological advancements. While the industry has experienced marked growth, the regulatory system in the United States still operates at a capacity much lower than the influx of new drug and biologic candidates. As a result, it has become standard for months or even years of waiting for commercial approval by the U.S. Food and Drug Administration. These regulatory delays have generated a system that stifles growth and innovation due to the exorbitant costs associated with awaiting approval from the nation’s sole regulatory agency. The recent re-emergence of diseases that impact pediatric demographics represents one particularly acute reason for developing a regulatory system that facilitates a more efficient commercial review process. Herein, we present a range of initiatives that could represent early steps toward alleviating the delays in approving life-saving therapeutics.

  18. Identification of electrical resistance of fresh state concrete for nondestructive setting process monitoring

    International Nuclear Information System (INIS)

    Shin, Sung Woo

    2015-01-01

    Concrete undergoes significant phase changes from liquid to solid states as hydration progresses. These phase changes are known as the setting process. A liquid state concrete is electrically conductive because of the presence of water and ions. However, since the conductive elements in the liquid state of concrete are consumed to produce non-conductive hydration products, the electrical conductivity of hydrating concrete decreases during the setting process. Therefore, the electrical properties of hydrating concrete can be used to monitor the setting process of concrete. In this study, a parameter identification method to estimate electrical parameters such as ohmic resistance of concrete is proposed. The effectiveness of the proposed method for monitoring the setting process of concrete is experimentally validated

  19. Review: how do hospital organizational structure and processes affect quality of care?: a critical review of research methods.

    Science.gov (United States)

    Hearld, Larry R; Alexander, Jeffrey A; Fraser, Irene; Jiang, H Joanna

    2008-06-01

    Interest in organizational contributions to the delivery of care has risen significantly in recent years. A challenge facing researchers, practitioners, and policy makers is identifying ways to improve care by improving the organizations that provide this care, given the complexity of health care organizations and the role organizations play in influencing systems of care. This article reviews the literature on the relationship between the structural characteristics and organizational processes of hospitals and quality of care. The review uses Donabedian's structure-process-outcome and level of analysis frameworks to organize the literature. The results of this review indicate that a preponderance of studies are conducted at the hospital level of analysis and are predominantly focused on the organizational structure-quality outcome relationship. The article concludes with recommendations of how health services researchers can expand their research to enhance one's understanding of the relationship between organizational characteristics and quality of care.

  20. A Review of (Elementary) School Self-Assessment Processes: Ontario and Beyond

    Science.gov (United States)

    Ryan, Thomas G.; Telfer, Leslie

    2011-01-01

    This review draws attention to issues related to school self-assessment. This process has been similarly implemented in a variety of jurisdictions globally in the past decade hence their inclusion herein as an attempt to understand the school self-assessment process which has also been developed for use in local Ontario (Canadian) elementary…

  1. Review of friction modeling in metal forming processes

    DEFF Research Database (Denmark)

    Nielsen, C.V.; Bay, N.

    2018-01-01

    Abstract In metal forming processes, friction between tool and workpiece is an important parameter influencing the material flow, surface quality and tool life. Theoretical models of friction in metal forming are based on analysis of the real contact area in tool-workpiece interfaces. Several...... research groups have studied and modeled the asperity flattening of workpiece material against tool surface in dry contact or in contact interfaces with only thin layers of lubrication with the aim to improve understanding of friction in metal forming. This paper aims at giving a review of the most...... conditions, normal pressure, sliding length and speed, temperature changes, friction on the flattened plateaus and deformation of the underlying material. The review illustrates the development in the understanding of asperity flattening and the methods of analysis....

  2. State-of-the-art review of some artificial intelligence applications in pile foundations

    Directory of Open Access Journals (Sweden)

    Mohamed A. Shahin

    2016-01-01

    Full Text Available Geotechnical engineering deals with materials (e.g. soil and rock that, by their very nature, exhibit varied and uncertain behavior due to the imprecise physical processes associated with the formation of these materials. Modeling the behavior of such materials in geotechnical engineering applications is complex and sometimes beyond the ability of most traditional forms of physically-based engineering methods. Artificial intelligence (AI is becoming more popular and particularly amenable to modeling the complex behavior of most geotechnical engineering applications because it has demonstrated superior predictive ability compared to traditional methods. This paper provides state-of-the-art review of some selected AI techniques and their applications in pile foundations, and presents the salient features associated with the modeling development of these AI techniques. The paper also discusses the strength and limitations of the selected AI techniques compared to other available modeling approaches.

  3. A Review of NASA Human Research Program's Scientific Merit Processes: Letter Report

    Science.gov (United States)

    Pawelczyk, James A. (Editor); Strawbridge, Larisa M. (Editor); Schultz, Andrea M. (Editor); Liverman, Catharyn T. (Editor)

    2012-01-01

    At the request of the National Aeronautics and Space Administration (NASA), the Institute of Medicine (IOM) convened the Committee on the Review of NASA Human Research Program's (HRP's) Scientific Merit Assessment Processes in December 2011. The committee was asked to evaluate the scientific merit assessment processes that are applied to directed research tasks2 funded through the HRP and to determine best practices from similar assessment processes that are used in other federal agencies. This letter report and its recommendations are the product of a 10-member ad hoc committee, which included individuals who had previously conducted research under the HRP, were familiar with the HRP s research portfolio and operations, had specific knowledge of peer review processes, or were familiar with scientific merit assessment processes used in other organizations and federal agencies, such as the Canadian Institutes of Health Research (CIHR); National Institutes of Health (NIH); National Science Foundation (NSF); and U.S. Departments of Agriculture (USDA), Defense (DOD), and Transportation.

  4. Implementing a Standardised Annual Programme Review Process in a Third-Level Institution

    Science.gov (United States)

    Wickham, Sheelagh; Brady, Malcolm; Ingle, Sarah; McMullan, Caroline; Nic Giolla Mhichíl, Mairéad; Walshe, Ray

    2017-01-01

    Purpose: Ideally, quality should be, and is, an integral element of education, yet capturing and articulating quality is not simple. Programme quality reviews in third-level education can demonstrate quality and identify areas for improvement, offering many potential benefits. However, details on the process of quality programme review are limited…

  5. Global Software Development: A Review of the State-Of-The-Art (2007-2011)

    DEFF Research Database (Denmark)

    Ali Babar, Muhammad; Zahedi, Mansooreh

    a state-of-the-art review of the GSD research literature published in the main venue of Global Software Engineering in order to identify the main research trends and gaps that needs to be filled by future research. We were also interested placing the findings of our review with respect to a practice......-driven GSD research agenda. Method: We used structured literature review methodology for which we decided to select and review the recently published research papers (i.e., 2007 - 2011) from the International Conference in Global Software Engineering (ICGSE). We used a framework for organizing GSD research...... challenges and threats and a practice-driven research agenda for extracting and organizing the data from the reviewed papers. We used theoretical reasoning for classifying the reviewed papers under different categories, which were mainly based on the framework, a decision that also enabled us to propose...

  6. A Review of Literature on analysis of JIG Grinding Process

    DEFF Research Database (Denmark)

    Sudheesh, P. K.; Puthumana, Govindan

    2016-01-01

    in jig grinding, because of their uniformity and purity. In this paper, abrief review of the analysis of jig grinding process considering various research trends is presented. The areas highlighted are: optimization, selection of abrasives, selection of processing conditions and practical considerations....... The optimization of parameters in jig grinding process is important to maximize productivity and to improve quality. The abrasives of hard jig grinding wheels get blunt quickly so these are recommended to grind workpiece of low hardness and soft grinding wheels are recommended for hard material workpieces. The jig...

  7. A protocol for a systematic review of the use of process evaluations in knowledge translation research.

    Science.gov (United States)

    Scott, Shannon D; Rotter, Thomas; Hartling, Lisa; Chambers, Thane; Bannar-Martin, Katherine H

    2014-12-23

    through complementary process evaluations alongside trials. This systematic review will serve as a 'state of the science' on methodological approaches to process evaluations and will allow us to: 1) take stock of current research approaches and 2) develop concrete recommendations for knowledge users (e.g., quality consultants and health services researchers) designing future KT process evaluations.

  8. 7 CFR 210.18 - Administrative reviews.

    Science.gov (United States)

    2010-01-01

    ... this section. (d) Scheduling school food authorities. The State agency shall use its own criteria to... claims review process required under § 210.8(b)(2) of this part in the selection of school food... is encouraged to review all schools meeting the school selection criteria specified in paragraph (e...

  9. State of the art of UO2 fuel fabrication processes

    International Nuclear Information System (INIS)

    Henke, M.; Klemm, U.

    1980-01-01

    Starting from the need of UO 2 for thermal power reactors in the period from 1980 to 1990 and the role of UF 6 conversion into UO 2 within the fuel cycle, the state-of-the-art of the three established industrial processes - ADU process, AUC process, IDR process - is assessed. The number of process stages and requirements on process management are discussed. In particular, the properties of the fabricated UO 2 powders, their influence on the following pellet production and on operational behaviour of the fuel elements under reactor conditions are described. Hence, an evaluation of the three essential conversion processes is derived. (author)

  10. Cumulative latency advance underlies fast visual processing in desynchronized brain state.

    Science.gov (United States)

    Wang, Xu-dong; Chen, Cheng; Zhang, Dinghong; Yao, Haishan

    2014-01-07

    Fast sensory processing is vital for the animal to efficiently respond to the changing environment. This is usually achieved when the animal is vigilant, as reflected by cortical desynchronization. However, the neural substrate for such fast processing remains unclear. Here, we report that neurons in rat primary visual cortex (V1) exhibited shorter response latency in the desynchronized state than in the synchronized state. In vivo whole-cell recording from the same V1 neurons undergoing the two states showed that both the resting and visually evoked conductances were higher in the desynchronized state. Such conductance increases of single V1 neurons shorten the response latency by elevating the membrane potential closer to the firing threshold and reducing the membrane time constant, but the effects only account for a small fraction of the observed latency advance. Simultaneous recordings in lateral geniculate nucleus (LGN) and V1 revealed that LGN neurons also exhibited latency advance, with a degree smaller than that of V1 neurons. Furthermore, latency advance in V1 increased across successive cortical layers. Thus, latency advance accumulates along various stages of the visual pathway, likely due to a global increase of membrane conductance in the desynchronized state. This cumulative effect may lead to a dramatic shortening of response latency for neurons in higher visual cortex and play a critical role in fast processing for vigilant animals.

  11. Behavioural processes in marketing channel relationships: Review and integration of empirical evidence

    DEFF Research Database (Denmark)

    Jensen, Nils Bøgelund; Skytte, Hans

    1997-01-01

    This paper reviews the empirical research on behavioural processes in marketing channel relationships. Systematically examining nine international journals, we find 49 papers on behavioural processes. On the basis of the hypothesis tests in the papers, we discuss the results and integrate...

  12. Mushroom cultivation, processing and value added products: a patent based review.

    Science.gov (United States)

    Singhal, Somya; Rasane, Prasad; Kaur, Sawinder; Garba, Umar; Singh, Jyoti; Raj, Nishant; Gupta, Neeru

    2018-06-03

    Edible mushrooms are an abundant source of carbohydrates, proteins, and multiple antioxidants and phytonutrients. This paper presents a general overview on the edible fungus describing the inventions made in the field of its cultivation, equipment and value added products. To understand and review the innovations and nutraceutical benefits of mushrooms as well as to develop interest regarding the edible mushrooms. Information provided in this review is based on the available research investigations and patents. Mushrooms are an edible source of a wide variety of antioxidants and phytonutrients with a number of nutraceutical properties including anti-tumor and anti-carcinogenic. Thus, several investigations are made for cultivation and improvement of the yield of mushrooms through improvisation of growth substrates and equipment used for mushroom processing. The mushroom has been processed into various products to increase its consumption, providing the health and nutritional benefit to mankind. This paper summarizes the cultivation practices of mushroom, its processing equipments, methods of preservation, value added based products, and its nutraceutical properties. The review also highlights the various scientific feats achieved in terms of patents and research publications promoting mushroom as a wholesome food. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  13. Continuous-variable quantum information processing

    DEFF Research Database (Denmark)

    Andersen, Ulrik Lund; Leuchs, G.; Silberhorn, C.

    2010-01-01

    the continuous degree of freedom of a quantum system for encoding, processing or detecting information, one enters the field of continuous-variable (CV) quantum information processing. In this paper we review the basic principles of CV quantum information processing with main focus on recent developments...... in the field. We will be addressing the three main stages of a quantum information system; the preparation stage where quantum information is encoded into CVs of coherent states and single-photon states, the processing stage where CV information is manipulated to carry out a specified protocol and a detection...... stage where CV information is measured using homodyne detection or photon counting....

  14. Process hazards review of the 904-A trench

    International Nuclear Information System (INIS)

    Snyder, D.E.

    1988-01-01

    The 904-A trench is an enclosed underground concrete containment for high level and low level radioactive waste lines between the main Laboratory Building 773-A and waste storage and shipping Building 776-A. The waste generated in laboratories and other facilities in 773-A flows by gravity into the high level and low level drain lines, which proceed from 773-A through the 904-A trench. The trench ends at 776-2A, where the underground was handling tanks for both high level and low level liquids are located. The trench serves to contain any leaks originating in the drain lines. The trench is sloped downward toward the Building 776-2A pipe gallery. Any liquid collected from the sump can be pumped automatically to a waste tank sampled. The review of the 904-A trench system included a study of the trench and piping itself, as well as a study of the high level and low level drain lines from the laboratories to the trench. The present review emphasized on examination of the hazards involved in chemical reactions in the drain lines, misuse of the drains, and criticality. The following items were examined: Process Hazards Review of the Liquid Waste Collection System, Nuclear Criticality Review of the High Level Drain System, Improvements in the 904-A Trench System, Operating Procedures, and Unusual Incidents

  15. Topology in quantum states. PEPS formalism and beyond

    Energy Technology Data Exchange (ETDEWEB)

    Aguado, M [Max-Planck-Institut fuer Quantenoptik. Hans-Kopfermann-Str. 1. D-85748 Garching (Germany); Cirac, J I [Max-Planck-Institut fuer Quantenoptik. Hans-Kopfermann-Str. 1. D-85748 Garching (Germany); Vidal, G [School of Physical Sciences. University of Queensland, Brisbane, QLD, 4072 (Australia)

    2007-11-15

    Topology has been proposed as a tool to protect quantum information encoding and processes. Work concerning the meaning of topology in quantum states as well as its characterisation in the projected entangled pair state (PEPS) formalism and related schemes is reviewed.

  16. State of the art and development of radioactive material processing

    International Nuclear Information System (INIS)

    Muenze, R.; Hladik, O.

    1981-01-01

    The radioisotope production at the Rossendorf Nuclear Research Centre is reviewed, considering irradiation facilities (nuclear reactor, cyclotron), processing of activated materials, in particular of nuclear fuel after short-term irradiation and the chemical separation of fission products, and the production of sup(99m)Tc radiopharmaceuticals

  17. The Relationships of Mental States and Intellectual Processes in the Learning Activities of Students

    Science.gov (United States)

    Prokhorov, Alexander O.; Chernov, Albert V.; Yusupov, Mark G.

    2016-01-01

    Investigation of the interaction of mental states and cognitive processes in the classroom allows us to solve the problem of increasing the effectiveness of training by activating cognitive processes and management of students' mental states. This article is concerned with the most general patterns of interaction between mental state and…

  18. Book Review: Anja Jetschke: Human Rights and State Security: Indonesia and the Philippines

    Directory of Open Access Journals (Sweden)

    Salvador Santino F. Regilme, Jr.

    2013-01-01

    Full Text Available Book Review of the Monograph: Jetschke, Anja (2010, Human Rights and State Security: Indonesia and the Philippines ; Philadelphia: University of Pennsylvania Press, ISBN: 978-0-8122-4301-7, 368 pages

  19. Nano-Ionic Solid State Resistive Memories (Re-RAM): A Review.

    Science.gov (United States)

    Sahoo, Satyajeet; Prabaharan, S R S

    2017-01-01

    Nano-ionic devices based on modest to fast ion conductors as active materials intrigued a revolution in the field of nano solid state resistive memories (the so-called Re-RAM) ever since HP labs unveiled the first solid state memristor device based on titanium dioxide (TiO2). This has brought impetus to the practical implementation of fourth missing element called “Memristor” correlating charge (q) and flux (φ) based on the conceptual thought by Chua in 1971 completing a missing gap between the passive electronic components (R, C and L). It depicts various functional features as memory element in terms of ionic charge transport in solid state by virtue of external electric flux variations. Consequently, a new avenue has been found by manipulating the ionic charge carriers creating a fast switching resistive random access memory (Re-RAM) or the so-called Memristors. The recent research has led to low power, faster switching speed, high endurance and high retention time devices that can be scaled down the order of few nanometers dimension and the 3D stacking is employed that significantly reduces the die area. This review is organized to provide the progress hitherto accomplished in the materials arena to make memristor devices with respect to current research attempts, different stack structures of ReRAM cells using various materials as well as the application of memristive system. Different synthesis approaches to make nano-ionic conducting metal oxides, the fabrication methods for ReRAM cells and its memory performance are reviewed comprehensively.

  20. ETHNOPHARMACOLOGICAL AND PHYTOCHEMICAL REVIEW OF ...

    African Journals Online (AJOL)

    Mgina

    Lyantagaye – Ethnopharmacological and phytochemical review of Allium and Tulbaghia … 60 ... produced in the plant by the aging process. As simply stated ..... exhibit anti-infective activity against ..... implications for telomere evolution. Cell.

  1. The role of verbalization in the Rorschach response process: a review.

    Science.gov (United States)

    Gold, J M

    1987-01-01

    Traditional Rorschach theory has consistently overlooked the linguistic aspect of the response process. Most conceptualizations focus on the perceptual and cognitive aspects of the process, never examining the subject's need to find a linguistic representation for the inner, perceptual process. This review examines the traditional formulations and suggests that new research from information-processing, neuropsychological, and dual-coding memory theory paradigms offer new possibilities for Rorschach research that would incorporate an appreciation of the unique cognitive demand of the test--the linking of percept with language.

  2. Warehouse Order-Picking Process. Review

    Directory of Open Access Journals (Sweden)

    E. V. Korobkov

    2015-01-01

    Full Text Available This article describes basic warehousing activities, namely: movement, information storage and transfer, as well as connections between typical warehouse operations (reception, transfer, assigning storage position and put-away, order-picking, hoarding and sorting, cross-docking, shipping. It presents a classification of the warehouse order-picking systems in terms of manual labor on offer as well as external (marketing channels, consumer’s demand structure, supplier’s replenishment structure and inventory level, total production demand, economic situation and internal (mechanization level, information accessibility, warehouse dimensionality, method of dispatch for shipping, zoning, batching, storage assignment method, routing method factors affecting the designing systems complexity. Basic optimization considerations are described. There is a literature review on the following sub-problems of planning and control of orderpicking processes.A layout design problem has been taken in account at two levels — external (facility layout problem and internal (aisle configuration problem. For a problem of distributing goods or stock keeping units the following methods are emphasized: random, nearest open storage position, and dedicated (COI-based, frequency-based distribution, as well as class-based and familygrouped (complimentary- and contact-based one. Batching problem can be solved by two main methods, i.e. proximity order batching (seed and saving algorithms and time-window order batching. There are two strategies for a zoning problem: progressive and synchronized, and also a special case of zoning — bucket brigades method. Hoarding/sorting problem is briefly reviewed. Order-picking routing problem will be thoroughly described in the next article of the cycle “Warehouse order-picking process”.

  3. Applying state diagrams to food processing and development

    Science.gov (United States)

    Roos, Y.; Karel, M.

    1991-01-01

    The physical state of food components affects their properties during processing, storage, and consumption. Removal of water by evaporation or by freezing often results in formation of an amorphous state (Parks et al., 1928; Troy and Sharp, 1930; Kauzmann, 1948; Bushill et al., 1965; White and Cakebread, 1966; Slade and Levine, 1991). Amorphous foods are also produced from carbohydrate melts by rapid cooling after extrusion or in the manufacturing of hard sugar candies and coatings (Herrington and Branfield, 1984). Formation of the amorphous state and its relation to equilibrium conditions are shown in Fig. 1 [see text]. The most important change, characteristic of the amorphous state, is noticed at the glass transition temperature (Tg), which involves transition from a solid "glassy" to a liquid-like "rubbery" state. The main consequence of glass transition is an increase of molecular mobility and free volume above Tg, which may result in physical and physico-chemical deteriorative changes (White and Cakebread, 1966; Slade and Levine, 1991). We have conducted studies on phase transitions of amorphous food materials and related Tg to composition, viscosity, stickiness, collapse, recrystallization, and ice formation. We have also proposed that some diffusion-limited deteriorative reactions are controlled by the physical state in the vicinity of Tg (Roos and Karel, 1990, 1991a, b, c). The results are summarized in this article, with state diagrams based on experimental and calculated data to characterize the relevant water content, temperature, and time-dependent phenomena of amorphous food components.

  4. 32 CFR 516.12 - Service of civil process outside the United States.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Service of civil process outside the United... AID OF CIVIL AUTHORITIES AND PUBLIC RELATIONS LITIGATION Service of Process § 516.12 Service of civil process outside the United States. (a) Process of foreign courts. In foreign countries service of process...

  5. Dual-process models of health-related behaviour and cognition: a review of theory.

    Science.gov (United States)

    Houlihan, S

    2018-03-01

    The aim of this review was to synthesise a spectrum of theories incorporating dual-process models of health-related behaviour. Review of theory, adapted loosely from Cochrane-style systematic review methodology. Inclusion criteria were specified to identify all relevant dual-process models that explain decision-making in the context of decisions made about human health. Data analysis took the form of iterative template analysis (adapted from the conceptual synthesis framework used in other reviews of theory), and in this way theories were synthesised on the basis of shared theoretical constructs and causal pathways. Analysis and synthesis proceeded in turn, instead of moving uni-directionally from analysis of individual theories to synthesis of multiple theories. Namely, the reviewer considered and reconsidered individual theories and theoretical components in generating the narrative synthesis' main findings. Drawing on systematic review methodology, 11 electronic databases were searched for relevant dual-process theories. After de-duplication, 12,198 records remained. Screening of title and abstract led to the exclusion of 12,036 records, after which 162 full-text records were assessed. Of those, 21 records were included in the review. Moving back and forth between analysis of individual theories and the synthesis of theories grouped on the basis of theme or focus yielded additional insights into the orientation of a theory to an individual. Theories could be grouped in part on their treatment of an individual as an irrational actor, as social actor, as actor in a physical environment or as a self-regulated actor. Synthesising identified theories into a general dual-process model of health-related behaviour indicated that such behaviour is the result of both propositional and unconscious reasoning driven by an individual's response to internal cues (such as heuristics, attitude and affect), physical cues (social and physical environmental stimuli) as well as

  6. Continuous state branching processes in random environment: The Brownian case

    OpenAIRE

    Palau, Sandra; Pardo, Juan Carlos

    2015-01-01

    We consider continuous state branching processes that are perturbed by a Brownian motion. These processes are constructed as the unique strong solution of a stochastic differential equation. The long-term extinction and explosion behaviours are studied. In the stable case, the extinction and explosion probabilities are given explicitly. We find three regimes for the asymptotic behaviour of the explosion probability and, as in the case of branching processes in random environment, we find five...

  7. Usefulness of multiqubit W-type states in quantum information processing

    Energy Technology Data Exchange (ETDEWEB)

    Singh, P. [Indian Institute of Technology (India); Adhikari, S. [Birla Institute of Technology (India); Kumar, A., E-mail: atulk@iitj.ac.in [Indian Institute of Technology (India)

    2016-10-15

    We analyze the efficiency of multiqubit W-type states as resources for quantum information. For this, we identify and generalize four-qubit W-type states. Our results show that these states can be used as resources for deterministic quantum information processing. The utility of results, however, is limited by the availability of experimental setups to perform and distinguish multiqubit measurements. We therefore emphasize protocols where two users want to establish an optimal bipartite entanglement using the partially entangled W-type states. We find that for such practical purposes, four-qubit W-type states can be a better resource in comparison to three-qubit W-type states. For a dense coding protocol, our states can be used deterministically to send two bits of classical message by locally manipulating a single qubit. In addition, we also propose a realistic experimental method to prepare the four-qubit W-type states using standard unitary operations and weak measurements.

  8. Unreacted equation of states of typical energetic materials under static compression: A review

    International Nuclear Information System (INIS)

    Zheng Zhaoyang; Zhao Jijun

    2016-01-01

    The unreacted equation of state (EOS) of energetic materials is an important thermodynamic relationship to characterize their high pressure behaviors and has practical importance. The previous experimental and theoretical works on the equation of state of several energetic materials including nitromethane, 1,3,5-trinitrohexahydro-1,3,5-triazine (RDX), 1,3,5,7-tetranitro-1,3,5,7-tetrazacyclooctane (HMX), hexanitrostilbene (HNS), hexanitrohexaazaisowurtzitane (HNIW or CL-20), pentaerythritol tetranitrate (PETN), 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105), triamino-trinitrobenzene (TATB), 1,1-diamino-2,2-dinitroethene (DADNE or FOX-7), and trinitrotoluene (TNT) are reviewed in this paper. The EOS determined from hydrostatic and non-hydrostatic compressions are discussed and compared. The theoretical results based on ab initio calculations are summarized and compared with the experimental data. (topical review)

  9. The state of knowledge on technologies and their use for fall detection: A scoping review.

    Science.gov (United States)

    Lapierre, N; Neubauer, N; Miguel-Cruz, A; Rios Rincon, A; Liu, L; Rousseau, J

    2018-03-01

    Globally, populations are aging with increasing life spans. The normal aging process and the resulting disabilities increase fall risks. Falls are an important cause of injury, loss of independence and institutionalization. Technologies have been developed to detect falls and reduce their consequences but their use and impact on quality of life remain debatable. Reviews on fall detection technologies exist but are not extensive. A comprehensive literature review on the state of knowledge of fall detection technologies can inform research, practice, and user adoption. To examine the extent and the diversity of current technologies for fall detection in older adults. A scoping review design was used to search peer-reviewed literature on technologies to detect falls, published in English, French or Spanish since 2006. Data from the studies were analyzed descriptively. The literature search identified 3202 studies of which 118 were included for analysis. Ten types of technologies were identified ranging from wearable (e.g., inertial sensors) to ambient sensors (e.g., vision sensors). Their Technology Readiness Level was low (mean 4.54 SD 1.25; 95% CI [4.31, 4.77] out of a maximum of 9). Outcomes were typically evaluated on technological basis and in controlled environments. Few were evaluated in home settings or care units with older adults. Acceptability, implementation cost and barriers were seldom addressed. Further research should focus on increasing Technology Readiness Levels of fall detection technologies by testing them in real-life settings with older adults. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. A Short Review of Membrane Fouling in Forward Osmosis Processes

    Science.gov (United States)

    Chun, Youngpil; Mulcahy, Dennis; Zou, Linda; Kim, In S.

    2017-01-01

    Interest in forward osmosis (FO) research has rapidly increased in the last decade due to problems of water and energy scarcity. FO processes have been used in many applications, including wastewater reclamation, desalination, energy production, fertigation, and food and pharmaceutical processing. However, the inherent disadvantages of FO, such as lower permeate water flux compared to pressure driven membrane processes, concentration polarisation (CP), reverse salt diffusion, the energy consumption of draw solution recovery and issues of membrane fouling have restricted its industrial applications. This paper focuses on the fouling phenomena of FO processes in different areas, including organic, inorganic and biological categories, for better understanding of this long-standing issue in membrane processes. Furthermore, membrane fouling monitoring and mitigation strategies are reviewed. PMID:28604649

  11. Hydrodynamic and morphological processes in Yangtze Estuary: State-of-the-art research and its applications by Hohai University

    Directory of Open Access Journals (Sweden)

    Jin-hai Zheng

    2012-12-01

    Full Text Available This paper presents a review of the state-of-the-art research and its applications developed at Hohai University relating to the hydrodynamic and morphological processes in the Yangtze Estuary. Longitudinal, lateral, and horizontal flow circulations have been revealed based on the measurements with acoustic Doppler current profilers (ADCP. The hydrodynamic mechanism at diversion points as well as the changing patterns of flow and sediment flux in the Yangtze Estuary has been investigated through long-term data analysis. A field survey has been carried out to detect the saltwater intrusion from the North Branch to South Branch. Different numerical models of flow motion, sediment transport, and saltwater intrusion have been developed to simulate the complicated processes and to evaluate the effects of engineering projects. The morphological processes of wetlands over a time scale of decades have been analyzed with an established database. Ideas for further research on the bio-geomorphological model system and long-term evolution mechanisms are put forward.

  12. Mechanism for the Excited-State Multiple Proton Transfer Process of Dihydroxyanthraquinone Chromophores.

    Science.gov (United States)

    Zhou, Qiao; Du, Can; Yang, Li; Zhao, Meiyu; Dai, Yumei; Song, Peng

    2017-06-22

    The single and dual cooperated proton transfer dynamic process in the excited state of 1,5-dihydroxyanthraquinone (1,5-DHAQ) was theoretically investigated, taking solvent effects (ethanol) into account. The absorption and fluorescence spectra were simulated, and dual fluorescence exhibited, which is consistent with previous experiments. Analysis of the calculated IR and Raman vibration spectra reveals that the intramolecular hydrogen bonding interactions (O 20 -H 21 ···O 24 and O 22 -H 23 ···O 25 ) are strengthened following the excited proton transfer process. Finally, by constructing the potential energy surfaces of the ground state, first excited singlet state, and triplet state, the mechanism of the intramolecular proton transfer of 1,5-DHAQ can be revealed.

  13. Processing Instruction: A review of issues

    Directory of Open Access Journals (Sweden)

    Muhlisin Rasuki

    2017-07-01

    Full Text Available This paper provides a critical review of Processing Instruction (PI. This type of instructional option was specifically designed to help second/foreign language (L2 learners grasp meaning manifested in the use of particular grammatical forms in a target language effectively through the provision of input. In this way, PI attempts to help learners develop grammatical competence in a target language in ways that foster their comprehension and production skills. The paper starts with outlining main characteristics of PI which distinguish it from other types of L2 grammar instruction. Then, a large body of research attempting to investigate the relative efficacy of PI is scrutinized. The paper concludes with a number of important issues that future studies on PI need to address.

  14. Membrane contactors for CO2 capture processes - critical review

    Science.gov (United States)

    Nogalska, Adrianna; Trojanowska, Anna; Garcia-Valls, Ricard

    2017-07-01

    The use of membrane contactor in industrial processes is wide, and lately it started to be used in CO2 capture process mainly for gas purification or to reduce the emission. Use of the membrane contactor provides high contact surface area so the size of the absorber unit significantly decreases, which is an important factor for commercialization. The research has been caried out regarding the use of novel materials for the membrane production and absorbent solution improvements. The present review reveals the progress in membrane contactor systems for CO2 capture processes concerning solution for ceramic membrane wetting, comparison study of different polymers used for fabrication and methods of enzyme immobilization for biocomposite membrane. Also information about variety of absorbent solutions is described.

  15. Application of radiation technology to sewage sludge processing: A review

    International Nuclear Information System (INIS)

    Wang Jianlong; Wang Jiazhuo

    2007-01-01

    Sewage sludge is unwanted residual solid wastes generated in wastewater treatment and its management is one of the most critical environmental issues of today. The treatment and disposal of sludge contribute a considerable proportion of the cost for running a wastewater treatment plant. The increasing amount of swage sludge and more and more legislative regulation of its disposal have stimulated the need for developing new technologies to process sewage sludge efficiently and economically. One ideal consideration is to recycle it after proper treatment. Radiation technology is regarded to be a promising alternative for its high efficiency in pathogen inactivation, organic pollutants oxidation, odor nuisance elimination and some other characteristics enhancement, which will facilitate the down-stream process of sludge treatment and disposal. Here we present a brief review of application of radiation technology on sewage sludge processing. Some basic information of two currently available irradiation systems and fundamental radiation chemistry are introduced firstly; then the world-wide application of this promising technology is reviewed; various effects of radiation on sludge is discussed in detail; and some concluding remarks are given and some future directions are also proposed

  16. State of the Art Review on Theoretical Tribology of Fluid Power Displacement Machines

    DEFF Research Database (Denmark)

    Cerimagic, Remzija; Johansen, Per; Andersen, Torben O.

    2016-01-01

    machines, and also the work done to validate the theoretical models. This review is not a complete historical account, but aim to describe current trends in fluid power displacement machine tribology. The review considers the rheological models used in the theoretical approaches, the modeling...... and wear mechanisms in the lubricating gaps in fluid power machines is confined to simulation models, as experimental treatments of these mechanisms are very difficult. The aim of this paper is a state of the art review on the theoretical work for the design and optimization of fluid power displacement...... of elastohydrodynamic effects, the modeling of thermal effects, and finally the experimental validation of the theoretical models....

  17. 77 FR 24148 - Revision to the Hawaii State Implementation Plan, Minor New Source Review Program

    Science.gov (United States)

    2012-04-23

    ... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 52 [EPA-R09-OAR-2012-0213; FRL-9661-6] Revision to the Hawaii State Implementation Plan, Minor New Source Review Program AGENCY: Environmental Protection Agency... final action to approve revisions to the Hawaii State Implementation Plan (SIP). These revisions would...

  18. PolyNano M.6.1.1 Process validation state-of-the-art

    DEFF Research Database (Denmark)

    Tosello, Guido; Hansen, Hans Nørgaard; Calaon, Matteo

    2012-01-01

    Nano project. Methods for replication process validation are presented and will be further investigated in WP6 “Process Chain Validation” and applied to PolyNano study cases. Based on the available information, effective best practice standard process validation will be defined and implemented...... assessment methods, and presents measuring procedures/techniques suitable for replication fidelity studies. The report reviews state‐of‐the‐art research results regarding replication obtained at different scales, tooling technologies based on surface replication, process validation trough design...

  19. ALARA Review of 233-S Process Hood D and D and Related Activities

    International Nuclear Information System (INIS)

    Landsman, S.D.

    1999-01-01

    This document is an as low as reasonably achievable (ALARA) review of design packages for planned work at the 233-S Facility. The ALARA review was initiated in accordance with the Bechtel Hanford, Inc. (BHI) Integrated Environmental, Safety, and Health Management System (ISMS) workflow process

  20. Drugs Cleared Through The FDA's Expedited Review Offer Greater Gains Than Drugs Approved By Conventional Process.

    Science.gov (United States)

    Chambers, James D; Thorat, Teja; Wilkinson, Colby L; Neumann, Peter J

    2017-08-01

    We investigated whether drugs approved by the Food and Drug Administration (FDA) through expedited review have offered larger health gains, compared to drugs approved through conventional review processes. We identified published estimates of additional health gains (measured in quality-adjusted life-years, or QALYs) associated with drugs approved in the period 1999-2012 through expedited (seventy-six drugs) versus conventional (fifty-nine) review processes. We found that drugs in at least one expedited review program offered greater gains than drugs reviewed through conventional processes (0.182 versus 0.003 QALYs). We also found that, compared to drugs not included in the same program, greater gains were provided by drugs in the priority review (0.175 versus 0.007 QALYs), accelerated approval (0.370 versus 0.031 QALYs), and fast track (0.254 versus 0.014 QALYs) programs. Our analysis suggests that the FDA has prioritized drugs that offer the largest health gains. Project HOPE—The People-to-People Health Foundation, Inc.

  1. State and Urban Area Homeland Security Strategy v3.0: Evolving Strategic Planning

    National Research Council Canada - National Science Library

    Chen, Darren

    2006-01-01

    ... with state and local stakeholders. Federal state and local reviewers regard the current state and urban homeland security strategies as generally inadequate and indicative of limited strategic planning processes...

  2. Application of hydrometallurgy techniques in quartz processing and purification: a review

    Science.gov (United States)

    Lin, Min; Lei, Shaomin; Pei, Zhenyu; Liu, Yuanyuan; Xia, Zhangjie; Xie, Feixiang

    2018-04-01

    Although there have been numerous studies on separation and purification of metallic minerals by hydrometallurgy techniques, applications of the chemical techniques in separation and purification of non-metallic minerals are rarely reported. This paper reviews disparate areas of study into processing and purification of quartz (typical non-metallic ore) in an attempt to summarize current work, as well as to suggest potential for future consolidation in the field. The review encompasses chemical techniques of the quartz processing including situations, progresses, leaching mechanism, scopes of application, advantages and drawbacks of micro-bioleaching, high temperature leaching, high temperature pressure leaching and catalyzed high temperature pressure leaching. Traditional leaching techniques including micro-bioleaching and high temperature leaching are unequal to demand of modern glass industry for quality of quartz concentrate because the quartz products has to be further processed. High temperature pressure leaching and catalyzed high temperature pressure leaching provide new ways to produce high-grade quartz sand with only one process and lower acid consumption. Furthermore, the catalyzed high temperature pressure leaching realizes effective purification of quartz with extremely low acid consumption (no using HF or any fluoride). It is proposed that, by integrating the different chemical processes of quartz processing and expounding leaching mechanisms and scopes of application, the research field as a monopolized industry would benefit.

  3. 49 CFR Attachment 4 - State and Local Agency Review of Impact Statements

    Science.gov (United States)

    2010-10-01

    ... 4 Attachment 4 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL..., Attach. 4 Attachment 4—State and Local Agency Review of Impact Statements 1. OBM Revised Circular No. A... proposed project in the case of federally assisted projects (Part I of A-95) generally takes place prior to...

  4. Solid-state reactions during mechanical alloying of ternary Fe–Al–X (X=Ni, Mn, Cu, Ti, Cr, B, Si) systems: A review

    Energy Technology Data Exchange (ETDEWEB)

    Hadef, Fatma, E-mail: hadef77@yahoo.fr [Laboratoire de Recherche sur la Physico-Chimie des Surfaces et Interfaces, LRPCSI, Université 20 Août 1955, BP 26, Route d’El-Haddaiek, Skikda 21000 (Algeria); Département de Physique, Faculté des Sciences, Université 20 Août 1955, BP 26, Route d’El-Haddaiek, Skikda 21000 (Algeria)

    2016-12-01

    The last decade has witnessed an intensive research in the field of nanocrystalline materials due to their enhanced properties. A lot of processing techniques were developed in order to synthesis these novel materials, among them mechanical alloying or high-energy ball milling. In fact, mechanical alloying is one of the most common operations in the processing of solids. It can be used to quickly and easily synthesize a variety of technologically useful materials which are very difficult to manufacture by other techniques. One advantage of MA over many other techniques is that is a solid state technique and consequently problems associated with melting and solidification are bypassed. Special attention is being paid to the synthesis of alloys through reactions mainly occurring in solid state in many metallic ternary Fe–Al–X systems, in order to improve mainly Fe–Al structural and mechanical properties. The results show that nanocrystallization is the common result occurring in all systems during MA process. The aim of this work is to illustrate the uniqueness of MA process to induce phase transformation in metallic Fe–Al–X (X=Ni, Mn, Cu, Ti, Cr, B, Si) systems. - Highlights: • A review of state of the art on binary Fe–Al alloys was presented. • Structural and microstructural properties of MA ternary Fe–Al–X alloys were summerized. • MA process is a powerful tool for producing metallic alloys at the nanometer scale.

  5. Review of searches for rare processes and physics beyond the Standard Model at HERA

    International Nuclear Information System (INIS)

    South, David M.; Turcato, Monica

    2016-01-01

    The electron-proton collisions collected by the H1 and ZEUS experiments at HERA comprise a unique particle physics data set, and a comprehensive range of measurements has been performed to provide new insight into the structure of the proton. The high centre of mass energy at HERA has also allowed rare processes to be studied, including the production of W and Z 0 bosons and events with multiple leptons in the final state. The data have also opened up a new domain to searches for physics beyond the Standard Model including contact interactions, leptoquarks, excited fermions and a number of supersymmetric models. This review presents a summary of such results, where the analyses reported correspond to an integrated luminosity of up to 1 fb -1 , representing the complete data set recorded by the H1 and ZEUS experiments. (orig.)

  6. United States of America: health system review.

    Science.gov (United States)

    Rice, Thomas; Rosenau, Pauline; Unruh, Lynn Y; Barnes, Andrew J; Saltman, Richard B; van Ginneken, Ewout

    2013-01-01

    This analysis of the United States health system reviews the developments in organization and governance, health financing, health-care provision, health reforms and health system performance. The US health system has both considerable strengths and notable weaknesses. It has a large and well-trained health workforce, a wide range of high-quality medical specialists as well as secondary and tertiary institutions, a robust health sector research program and, for selected services, among the best medical outcomes in the world. But it also suffers from incomplete coverage of its citizenry, health expenditure levels per person far exceeding all other countries, poor measures on many objective and subjective measures of quality and outcomes, an unequal distribution of resources and outcomes across the country and among different population groups, and lagging efforts to introduce health information technology. It is difficult to determine the extent to which deficiencies are health-system related, though it seems that at least some of the problems are a result of poor access to care. Because of the adoption of the Affordable Care Act in 2010, the United States is facing a period of enormous potential change. Improving coverage is a central aim, envisaged through subsidies for the uninsured to purchase private insurance, expanded eligibility for Medicaid (in some states) and greater protection for insured persons. Furthermore, primary care and public health receive increased funding, and quality and expenditures are addressed through a range of measures. Whether the ACA will indeed be effective in addressing the challenges identified above can only be determined over time. World Health Organization 2013 (acting as the host organization for, and secretariat of, the European Observatory on Health Systems and Policies).

  7. Modeling and simulation of heterogeneous catalytic processes

    CERN Document Server

    Dixon, Anthony

    2014-01-01

    Heterogeneous catalysis and mathematical modeling are essential components of the continuing search for better utilization of raw materials and energy, with reduced impact on the environment. Numerical modeling of chemical systems has progressed rapidly due to increases in computer power, and is used extensively for analysis, design and development of catalytic reactors and processes. This book presents reviews of the state-of-the-art in modeling of heterogeneous catalytic reactors and processes. Reviews by leading authorities in the respective areas Up-to-date reviews of latest techniques in modeling of catalytic processes Mix of US and European authors, as well as academic/industrial/research institute perspectives Connections between computation and experimental methods in some of the chapters.

  8. Workplace health understandings and processes in small businesses: a systematic review of the qualitative literature.

    Science.gov (United States)

    MacEachen, Ellen; Kosny, Agnieszka; Scott-Dixon, Krista; Facey, Marcia; Chambers, Lori; Breslin, Curtis; Kyle, Natasha; Irvin, Emma; Mahood, Quenby

    2010-06-01

    Small businesses (SBs) play an important role in global economies, employ half of all workers, and pose distinct workplace health problems. This systematic review of qualitative peer-reviewed literature was carried out to identify and synthesize research findings about how SB workplace parties understand and enact processes related to occupational health and safety (OHS). The review was conducted as part of a larger mixed-method review and in consultation with stakeholders. A comprehensive literature search identified 5067 studies. After screening for relevance, 20 qualitative articles were identified. Quality assessment led to 14 articles of sufficient quality to be included in the meta-ethnographic findings synthesis. This review finds that SBs have distinctive social relations of work, apprehensions of workplace risk, and legislative requirements. Eight themes were identified that consolidate knowledge on how SB workplace parties understand OHS hazards, how they manage risk and health problems, and how broader structures, policies and systems shape the practice of workplace health in SBs. The themes contribute to 'layers of evidence' that address SB work and health phenomena at the micro (e.g. employer or worker behavior), meso (e.g. organizational dynamics) and macro (e.g. state policy) levels. This synthesis details the unique qualities and conditions of SBs that merit particular attention from planners and occupational health policy makers. In particular, the informal workplace social relations can limit workers' and employers' apprehension of risk, and policy and complex contractual conditions in which SBs are often engaged (such as chains of subcontracting) can complicate occupational health responsibilities. This review questions the utility of SB exemptions from OHS regulations and suggests a legislative focus on the particular needs of SBs. It considers ways that workers might activate their own workplace health concerns, and suggests that more

  9. Literature Review on Processing and Analytical Methods for ...

    Science.gov (United States)

    Report The purpose of this report was to survey the open literature to determine the current state of the science regarding the processing and analytical methods currently available for recovery of F. tularensis from water and soil matrices, and to determine what gaps remain in the collective knowledge concerning F. tularensis identification from environmental samples.

  10. Mentoring and New Teacher Induction in the United States: A Review and Analysis of Current Practices

    Science.gov (United States)

    Bullough, Robert V., Jr.

    2012-01-01

    In this article, current practices were reviewed in mentoring and induction across three large states--New York, Texas, and California--and one small state, Utah. Patterns and trends are described in the United States, program results and evolving views of mentoring are discussed, gaps in the research literature are identified, and the future of…

  11. Collaborative peer review process as an informal interprofessional learning tool: Findings from an exploratory study.

    Science.gov (United States)

    Kwon, Jae Yung; Bulk, Laura Yvonne; Giannone, Zarina; Liva, Sarah; Chakraborty, Bubli; Brown, Helen

    2018-01-01

    Despite numerous studies on formal interprofessional education programes, less attention has been focused on informal interprofessional learning opportunities. To provide such an opportunity, a collaborative peer review process (CPRP) was created as part of a peer-reviewed journal. Replacing the traditional peer review process wherein two or more reviewers review the manuscript separately, the CPRP brings together students from different professions to collaboratively review a manuscript. The aim of this study was to assess whether the CPRP can be used as an informal interprofessional learning tool using an exploratory qualitative approach. Eight students from Counselling Psychology, Occupational and Physical Therapy, Nursing, and Rehabilitation Sciences were invited to participate in interprofessional focus groups. Data were analysed inductively using thematic analysis. Two key themes emerged, revealing that the CPRP created new opportunities for interprofessional learning and gave practice in negotiating feedback. The results reveal that the CPRP has the potential to be a valuable interprofessional learning tool that can also enhance reviewing and constructive feedback skills.

  12. Energy drinks in the Gulf Cooperation Council states: A review

    OpenAIRE

    Alhyas, Layla; El Kashef, Ahmed; AlGhaferi, Hamad

    2015-01-01

    Energy drinks have become a popular beverage worldwide. This review was carried out to have an overview among adolescents and emerging adults in the Gulf Co-operation Council states about energy drinks consumption rates and other related issues such as starting age and patterns of energy drink consumption. The Medline and Embase databases were searched separately using different terms such as energy drinks, energy beverages, and caffeinated drinks. Data related to the rates of energy drinks u...

  13. Assessing the Process of Retirement: a Cross-Cultural Review of Available Measures.

    Science.gov (United States)

    Rafalski, Julia C; Noone, Jack H; O'Loughlin, Kate; de Andrade, Alexsandro L

    2017-06-01

    Retirement research is now expanding beyond the post-World War II baby boomers' retirement attitudes and plans to include the nature of their workforce exit and how successfully they adjust to their new life. These elements are collectively known as the process of retirement. However, there is insufficient research in developing countries to inform the management of their ageing populations regarding this process. This review aims to facilitate national and cross-cultural research in developing and non-English speaking countries by reviewing the existing measures of the retirement process published in English and Portuguese. The review identified 28 existing measures assessing retirement attitudes, planning, decision making, adjustment and satisfaction with retirement. Information on each scale's item structure, internal reliability, grammatical structure and evidence of translations to other languages is presented. Of the 28 measures, 20 assessed retirement attitudes, plans and decision-making, 5 assessed adjustment to retirement and only two assessed retirement satisfaction. Only eight of the 28 scales had been translated into languages other than English. There is scope to translate measures of retirement attitudes and planning into other languages. However there is a paucity of translated measures of retirement decision-making and adjustment, and measures of retirement satisfaction in general. Within the limitations of this review, researchers are provided with the background to decide between translating existing measures or developing of more culturally appropriate assessment tools for addressing their research questions.

  14. Impartial judgment by the "gatekeepers" of science: fallibility and accountability in the peer review process.

    Science.gov (United States)

    Hojat, Mohammadreza; Gonnella, Joseph S; Caelleigh, Addeane S

    2003-01-01

    High publication demands and the low acceptance rate of peer review journals place the journal editors and their reviewers in a powerful position. Journal reviewers have a vital role not only in influencing the journal editor's publication decisions, but also in the very nature and direction of scientific research. Because of their influence in peer review outcomes, journal reviewers are aptly described as the "gatekeepers of science." In this article we describe several pitfalls that can impede reviewers' impartial judgement. These include such issues as confirmatory bias, the negative results bias (the file drawer problem), the Matthew effect, the Doctor Fox effect, and gender, race, theoretical orientation, and "political correctness." We argue that procedures currently used by many professional journals, such as blind or masked review, may not completely alleviate the effects of these pitfalls. Instead, we suggest that increasing reviewers' awareness of the pitfalls, accountability, and vigilance can improve fairness in the peer review process. The ultimate responsibilities belong to the journal editors who are confronted with the difficult task of satisfying journal readers, contributors, reviewers, and owners. We recommend that the journal editors conduct periodic internal and external evaluations of their journals' peer review process and outcomes, with participation of reviewers, contributors, readers and owners.

  15. Digital Airborne Photogrammetry—A New Tool for Quantitative Remote Sensing?—A State-of-the-Art Review On Radiometric Aspects of Digital Photogrammetric Images

    Directory of Open Access Journals (Sweden)

    Nikolaj Veje

    2009-09-01

    Full Text Available The transition from film imaging to digital imaging in photogrammetric data capture is opening interesting possibilities for photogrammetric processes. A great advantage of digital sensors is their radiometric potential. This article presents a state-of-the-art review on the radiometric aspects of digital photogrammetric images. The analysis is based on a literature research and a questionnaire submitted to various interest groups related to the photogrammetric process. An important contribution to this paper is a characterization of the photogrammetric image acquisition and image product generation systems. The questionnaire revealed many weaknesses in current processes, but the future prospects of radiometrically quantitative photogrammetry are promising.

  16. Framing and the health policy process: a scoping review.

    Science.gov (United States)

    Koon, Adam D; Hawkins, Benjamin; Mayhew, Susannah H

    2016-07-01

    Framing research seeks to understand the forces that shape human behaviour in the policy process. It assumes that policy is a social construct and can be cast in a variety of ways to imply multiple legitimate value considerations. Frames provide the cognitive means of making sense of the social world, but discordance among them forms the basis of policy contestation. Framing, as both theory and method, has proven to generate considerable insight into the nature of policy debates in a variety of disciplines. Despite its salience for understanding health policy debates; however, little is known about the ways frames influence the health policy process. A scoping review using the Arksey and O'Malley framework was conducted. The literature on framing in the health sector was reviewed using nine health and social science databases. Articles were included that explicitly reported theory and methods used, data source(s), at least one frame, frame sponsor and evidence of a given frame's effect on the health policy process. A total of 52 articles, from 1996 to 2014, and representing 12 countries, were identified. Much of the research came from the policy studies/political science literature (n = 17) and used a constructivist epistemology. The term 'frame' was used as a label to describe a variety of ideas, packaged as values, social problems, metaphors or arguments. Frames were characterized at various levels of abstraction ranging from general ideological orientations to specific policy positions. Most articles presented multiple frames and showed how actors advocated for them in a highly contested political process. Framing is increasingly an important, yet overlooked aspect of the policy process. Further analysis on frames, framing processes and frame conflict can help researchers and policymakers to understand opaque and highly charged policy issues, which may facilitate the resolution of protracted policy controversies. © The Author 2016. Published by Oxford

  17. Inside the Black Box: The Case Review Process of an Elder Abuse Forensic Center.

    Science.gov (United States)

    Navarro, Adria E; Wysong, Julia; DeLiema, Marguerite; Schwartz, Elizabeth L; Nichol, Michael B; Wilber, Kathleen H

    2016-08-01

    Preliminary evidence suggests that elder abuse forensic centers improve victim welfare by increasing necessary prosecutions and conservatorships and reducing the recurrence of protective service referrals. Center team members gather information and make decisions designed to protect clients and their assets, yet the collective process of how these case reviews are conducted remains unexamined. The purpose of this study is to present a model describing the interprofessional approach of investigation and response to financial exploitation (FE), a frequent and complex type of abuse of vulnerable adults. To develop an understanding of the case review process at the Los Angeles County Elder Abuse Forensic Center (Center), a quasi-Delphi field study approach was used involving direct observations of meetings, surveying team members, and review from the Center's Advisory Council. The goal of this iterative analysis was to understand the case review process for suspected FE in Los Angeles County. A process map of key forensic center elements was developed that may be useful for replication in other settings. The process map includes: (a) multidisciplinary data collection, (b) key decisions for consideration, and (c) strategic actions utilized by an interprofessional team focused on elder justice. Elder justice relies on a complex system of providers. Elder abuse forensic centers provide a process designed to efficiently address client safety, client welfare, and protection of assets. Study findings provide a process map that may help other communities replicate an established multidisciplinary team, one experienced with justice system outcomes designed to protect FE victims. © The Author 2015. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  18. MMN and novelty P3 in coma and other altered states of consciousness: a review.

    Science.gov (United States)

    Morlet, Dominique; Fischer, Catherine

    2014-07-01

    In recent decades, there has been a growing interest in the assessment of patients in altered states of consciousness. There is a need for accurate and early prediction of awakening and recovery from coma. Neurophysiological assessment of coma was once restricted to brainstem auditory and primary cortex somatosensory evoked potentials elicited in the 30 ms range, which have both shown good predictive value for poor coma outcome only. In this paper, we review how passive auditory oddball paradigms including deviant and novel sounds have proved their efficiency in assessing brain function at a higher level, without requiring the patient's active involvement, thus providing an enhanced tool for the prediction of coma outcome. The presence of an MMN in response to deviant stimuli highlights preserved automatic sensory memory processes. Recorded during coma, MMN has shown high specificity as a predictor of recovery of consciousness. The presence of a novelty P3 in response to the subject's own first name presented as a novel (rare) stimulus has shown a good correlation with coma awakening. There is now a growing interest in the search for markers of consciousness, if there are any, in unresponsive patients (chronic vegetative or minimally conscious states). We discuss the different ERP patterns observed in these patients. The presence of novelty P3, including parietal components and possibly followed by a late parietal positivity, raises the possibility that some awareness processes are at work in these unresponsive patients.

  19. Mental states, processes, and conscious intent in Libet's experiments

    African Journals Online (AJOL)

    The meaning and significance of Benjamin Libet's studies on the timing of conscious will have been widely discussed, especially by those wishing to draw sceptical conclusions about conscious agency and free will. However, certain important correctives for thinking about mental states and processes undermine the ...

  20. Cognitive processes in alcohol binges: A review and research agenda

    NARCIS (Netherlands)

    Field, M.; Schoenmakers, T.; Wiers, R.W.

    2008-01-01

    Alcohol abuse is associated with a cluster of long-term changes in cognitive processes, as predicted by contemporary models of addiction. In this paper we review evidence which suggests that similar changes may occur during an alcohol binge, and as such they may play an important role in explaining

  1. Cognitive processes in alcohol binges: a review and research agenda

    NARCIS (Netherlands)

    Field, M.; Schoenmakers, T.M.; Wiers, R.W.H.J.

    2008-01-01

    Alcohol abuse is associated with a cluster of long-term changes in cognitive processes, as predicted by contemporary models of addiction. In this paper we review evidence which suggests that similar changes may occur during an alcohol binge, and as such they may play an important role in explaining

  2. Ecohydrological processes and ecosystem services in the Anthropocene: a review

    Science.gov (United States)

    Ge Sun; Dennis Hallema; Heidi Asbjornsen

    2017-01-01

    The framework for ecosystem services has been increasingly used in integrated watershed ecosystem management practices that involve scientists, engineers, managers, and policy makers. The objective of this review is to explore the intimate connections between ecohydrological processes and water-related ecosystem services in human-dominated ecosystems in the...

  3. Assessment of Food Processing and Pharmaceutical Industrial Wastes as Potential Biosorbents: A Review

    OpenAIRE

    El-Sayed, Hanan E. M.; El-Sayed, Mayyada M. H.

    2014-01-01

    There is a growing need for the use of low-cost and ecofriendly adsorbents in water/wastewater treatment applications. Conventional adsorbents as well as biosorbents from different natural and agricultural sources have been extensively studied and reviewed. However, there is a lack of reviews on biosorption utilizing industrial wastes, particularly those of food processing and pharmaceuticals. The current review evaluates the potential of these wastes as biosorbents for the removal of some ha...

  4. Non-equivalent stringency of ethical review in the Baltic States: a sign of a systematic problem in Europe?

    Science.gov (United States)

    Gefenas, E; Dranseika, V; Cekanauskaite, A; Hug, K; Mezinska, S; Peicius, E; Silis, V; Soosaar, A; Strosberg, M

    2011-01-01

    We analyse the system of ethical review of human research in the Baltic States by introducing the principle of equivalent stringency of ethical review, that is, research projects imposing equal risks and inconveniences on research participants should be subjected to equally stringent review procedures. We examine several examples of non-equivalence or asymmetry in the system of ethical review of human research: (1) the asymmetry between rather strict regulations of clinical drug trials and relatively weaker regulations of other types of clinical biomedical research and (2) gaps in ethical review in the area of non-biomedical human research where some sensitive research projects are not reviewed by research ethics committees at all. We conclude that non-equivalent stringency of ethical review is at least partly linked to the differences in scope and binding character of various international legal instruments that have been shaping the system of ethical review in the Baltic States. Therefore, the Baltic example could also serve as an object lesson to other European countries which might be experiencing similar problems. PMID:20606000

  5. Cooperative Institute for Research in the Atmosphere (CIRA) Requirements Review

    Energy Technology Data Exchange (ETDEWEB)

    Zurawski, Jason, W; Mace, Kathryn, P

    2016-08-11

    In August 2016 The Energy Sciences Network (ESnet) and Colorado State University (CSU) organized a review to characterize the networking requirements of the Cooperative Institute for Research in the Atmosphere (CIRA) located on the campus of Colorado State University. Several key findings highlighting the results from the review were discovered, with benefits to improve the overall scientific process for CIRA and CSU.

  6. IAEA Expert Team Completes Mission to Review Japan's Nuclear Power Plant Safety Assessment Process, 31 January 2012, Tokyo, Japan

    International Nuclear Information System (INIS)

    2012-01-01

    Full text: A team of international nuclear safety experts today completed a review of Japan's two-stage process for assessing nuclear safety at the nation's nuclear power plants. The team began its work on 23 January and delivered a Preliminary Summary Report to Japanese officials today and plans to finish the final report by the end of February. National safety assessments and their peer review by the IAEA are a key component of the IAEA's Action Plan on Nuclear Safety, which was approved by the Agency's 152 Member States following last year's nuclear accident at Fukushima Daiichi Nuclear Power Station. At the request of the Government of Japan, the International Atomic Energy Agency (IAEA) organized a 10-person team to review the Japanese Nuclear and Industrial Safety Agency's (NISA) approach to the Comprehensive Assessments for the Safety of Existing Power Reactor Facilities and how NISA examines the results submitted by nuclear operators. The IAEA safety review mission consisted of five IAEA and three international nuclear safety experts. To help its review, the team held meetings in Tokyo with officials from NISA, the Japanese Nuclear Energy Safety (JNES) Organization, and the Kansai Electric Power Company (KEPCO), and the team visited the Ohi Nuclear Power Station to see an example of how Japan's Comprehensive Safety Assessment is being implemented by nuclear operators. 'We concluded that NISA's instructions to power plants and its review process for the Comprehensive Safety Assessments are generally consistent with IAEA Safety Standards', said team leader James Lyons, director of the IAEA's Nuclear Installation Safety Division. In its Preliminary Summary Report delivered today, the team highlighted a number of good practices and identified some improvements that would enhance the overall effectiveness of the Comprehensive Safety Assessment process. Good practices identified by the mission team include: Based on NISA instructions and commitments of the

  7. What do We Know about Family Interventions for Psychosis at the Process Level? A Systematic Review.

    Science.gov (United States)

    Grácio, Jaime; Gonçalves-Pereira, Manuel; Leff, Julian

    2016-03-01

    The evidence regarding effectiveness of family interventions for psychosis (FIP) is strong and consistent. However, there is a gap in the research on the process of these interventions, and little is known about their active ingredients. This review aims to identify the active ingredients of FIP. We conducted a systematic literature review, focusing on qualitative research, and analyzed 22 papers in total. We found a single study comprehensively exploring the process of FIP. All other studies focused on particular aspects of process-related variables. The key elements of FIP seem to be the so-called "common therapeutic factors", followed by education about the illness and coping skills training. This review supports the value of a stepped model of intervention according to the needs of the families. However, the evidence reviewed also reveals a gap in the research findings based on the limited research available. FIP are complex, psychosocial interventions with multiple components, and more intensive, qualitative research is needed to establish linkages between process and outcome. © 2015 Family Process Institute.

  8. Sol-gel processing of bioactive glass nanoparticles: A review.

    Science.gov (United States)

    Zheng, Kai; Boccaccini, Aldo R

    2017-11-01

    Silicate-based bioactive glass nanoparticles (BGN) are gaining increasing attention in various biomedical applications due to their unique properties. Controlled synthesis of BGN is critical to their effective use in biomedical applications since BGN characteristics, such as morphology and composition, determining the properties of BGN, are highly related to the synthesis process. In the last decade, numerous investigations focusing on BGN synthesis have been reported. BGN can mainly be produced through the conventional melt-quench approach or by sol-gel methods. The latter approaches are drawing widespread attention, considering the convenience and versatility they offer to tune the properties of BGN. In this paper, we review the strategies of sol-gel processing of BGN, including those adopting different catalysts for initiating the hydrolysis and condensation of silicate precursors as well as those combining sol-gel chemistry with other techniques. The processes and mechanism of different synthesis approaches are introduced and discussed in detail. Considering the importance of the BGN morphology and composition to their biomedical applications, strategies put forward to control the size, shape, pore structure and composition of BGN are discussed. BGN are particularly interesting biomaterials for bone-related applications, however, they also have potential for other biomedical applications, e.g. in soft tissue regeneration/repair. Therefore, in the last part of this review, recently reported applications of BGN in soft tissue repair and wound healing are presented. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. The Regulatory Review Process in South Africa: Challenges and Opportunities for a New Improved System.

    Science.gov (United States)

    Keyter, Andrea; Gouws, Joey; Salek, Sam; Walker, Stuart

    2018-01-01

    The aims of this study were to assess the regulatory review process in South Africa from 2015 to 2017, identify the key milestones and timelines; evaluate the effectiveness of measures to ensure consistency, transparency, timeliness, and predictability in the review process; and to provide recommendations for enhanced regulatory practices. A questionnaire was completed by the Medicines Control Council (MCC) to describe the organization of the authority, record key milestones and timelines in the review process and to identify good review practices (GRevPs). Currently, the MCC conducts a full assessment of quality, efficacy, and safety data in the review of all applications. The overall regulatory median approval time decreased by 14% in 2017 (1411 calendar days) compared with that of 2016, despite the 27% increase in the number of applications. However, the MCC has no target for overall approval time of new active substance applications and no targets for key review milestones. Guidelines, standard operating procedures, and review templates are in place, while the formal implementation of GRevPs and the application of an electronic document management system are planned for the near future. As the MCC transitions to the newly established South Africa Health Products Regulatory Authority, it would be crucial for the authority to recognize the opportunities for an enhanced regulatory review and should consider models such as abridged assessment, which encompass elements of risk stratification and reliance. It is hoped that resource constraints may then be alleviated and capacity developed to meet target timelines.

  10. Tansley Review No. 104, Calcium Physiology and Terrestrial Ecosystem Processes

    Science.gov (United States)

    S.B. McLaughlin; R. Wimmer

    1999-01-01

    Calcium occupies a unique position among plant nutrients both chemically and functionally. Its chemical properties allow it to exist in a wide range of binding states and to serve in both structural and messenger roles. Despite its importance in many plant processes, Ca mobility is low, making Ca uptake and distribution rate a limiting process for many key plant...

  11. Critical literature review of relationships between processing parameters and physical properties of particleboard

    Science.gov (United States)

    Myron W. Kelly

    1977-01-01

    The pertinent literature has been reviewed, and the apparent effects of selected processing parameters on the resultant particleboard properties, as generally reported in the literature, have been determined. Resin efficiency, type and level, furnish, and pressing conditions are reviewed for their reported effects on physical, strength, and moisture and dimensional...

  12. Review of low pressure plasma processing of proton exchange membrane fuel cell electrocatalysts

    OpenAIRE

    Brault , Pascal

    2016-01-01

    Review article; International audience; The present review is describing recent advances in plasma deposition and treatment of low temperature proton exchange membrane fuel cells electrocatalysts. Interest of plasma processing for growth of platinum based, non-precious and metal free electrocatalysts is highlighted. Electrocatalysts properties are tentatively correlated to plasma parameters.

  13. Zirconia powders production by precipitation: state-of-art review

    International Nuclear Information System (INIS)

    Oliveira, Ana Paula Almeida de; Torem, Mauricio Leonardo

    1994-01-01

    The important role played by zirconia in advanced ceramics can be attributed to its excellent wear and corrosion resistance and refractory character. The polymorphic nature of zirconia made the controlled addition of stabilizing oxides or the constraining effect of a dense ceramics matrix necessary to maintain high parameters had a significant influence on powder properties and on compacted powder behaviour in sintering. Particle shape and size, purity and crystalline structure were specially influenced by precipitation parameters. Therefore, this work presented a review of the state of the art in zirconia powder production and in the recent research on precipitation of that powder. (author)

  14. 7 CFR 250.30 - State processing of donated foods.

    Science.gov (United States)

    2010-01-01

    ... in evaluating and selecting processing contracts. The selection criteria shall be used in selecting... processors which can sell end products within the State are not required to follow the selection criteria. In addition to utilizing these selection criteria, when a contracting agency enters into a contract both for...

  15. Development and pilot test of a process to identify research needs from a systematic review.

    Science.gov (United States)

    Saldanha, Ian J; Wilson, Lisa M; Bennett, Wendy L; Nicholson, Wanda K; Robinson, Karen A

    2013-05-01

    To ensure appropriate allocation of research funds, we need methods for identifying high-priority research needs. We developed and pilot tested a process to identify needs for primary clinical research using a systematic review in gestational diabetes mellitus. We conducted eight steps: abstract research gaps from a systematic review using the Population, Intervention, Comparison, Outcomes, and Settings (PICOS) framework; solicit feedback from the review authors; translate gaps into researchable questions using the PICOS framework; solicit feedback from multidisciplinary stakeholders at our institution; establish consensus among multidisciplinary external stakeholders on the importance of the research questions using the Delphi method; prioritize outcomes; develop conceptual models to highlight research needs; and evaluate the process. We identified 19 research questions. During the Delphi method, external stakeholders established consensus for 16 of these 19 questions (15 with "high" and 1 with "medium" clinical benefit/importance). We pilot tested an eight-step process to identify clinically important research needs. Before wider application of this process, it should be tested using systematic reviews of other diseases. Further evaluation should include assessment of the usefulness of the research needs generated using this process for primary researchers and funders. Copyright © 2013 Elsevier Inc. All rights reserved.

  16. 31 CFR 2.1 - Processing of mandatory declassification review requests.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Processing of mandatory declassification review requests. 2.1 Section 2.1 Money and Finance: Treasury Office of the Secretary of the... inform the requester of the right to appeal the classification determination within 60 calendar days of...

  17. A comprehensive review on utilization of wastewater from coffee processing.

    Science.gov (United States)

    Rattan, Supriya; Parande, A K; Nagaraju, V D; Ghiwari, Girish K

    2015-05-01

    The coffee processing industry is one of the major agro-based industries contributing significantly in international and national growth. Coffee fruits are processed by two methods, wet and dry process. In wet processing, coffee fruits generate enormous quantities of high strength wastewater requiring systematic treatment prior to disposal. Different method approach is used to treat the wastewater. Many researchers have attempted to assess the efficiency of batch aeration as posttreatment of coffee processing wastewater from an upflow anaerobic hybrid reactor (UAHR)-continuous and intermittent aeration system. However, wet coffee processing requires a high degree of processing know-how and produces large amounts of effluents which have the potential to damage the environment. Characteristics of wastewater from coffee processing has a biological oxygen demand (BOD) of up to 20,000 mg/l and a chemical oxygen demand (COD) of up to 50,000 mg/l as well as the acidity of pH below 4. In this review paper, various methods are discussed to treat coffee processing wastewaters; the constitution of wastewater is presented and the technical solutions for wastewater treatment are discussed.

  18. Gasification processes old and new: a basic review of the major technologies

    International Nuclear Information System (INIS)

    Breault, R. W.

    2010-01-01

    This paper has been put together to provide a single source document that not only reviews the historical development of gasification but also compares the process to combustion. It also provides a short discussion on integrated gasification and combined cycle processes. The major focus of the paper is to describe the twelve major gasifiers being marketed today. Some of these are already fully developed while others are in various stages of development. The hydrodynamics and kinetics of each are reviewed along with the most likely gas composition from each of the technologies when using a variety of fuels under different conditions from air blown to oxygen blown and atmospheric pressure to several atmospheres. (author)

  19. A state-of-the-art review on nitrous oxide control from waste treatment and industrial sources.

    Science.gov (United States)

    Frutos, Osvaldo D; Quijano, Guillermo; Aizpuru, Aitor; Muñoz, Raúl

    2018-03-20

    This review aims at holistically analyzing the environmental problems associated with nitrous oxide (N 2 O) emissions by evaluating the most important sources of N 2 O and its environmental impacts. Emissions from wastewater treatment processes and the industrial production of nitric and adipic acid represent nowadays the most important anthropogenic point sources of N 2 O. Therefore, state-of-the-art strategies to mitigate the generation and release to the atmosphere of this greenhouse and O 3 -depleting gas in the waste treatment and industrial sectors are also reviewed. An updated review of the end-of-the-pipe technologies for N 2 O abatement, both in the waste treatment and industrial sectors, is herein presented and critically discussed for the first time. Despite the consistent efforts recently conducted in the development of cost-efficient and eco-friendly N 2 O abatement technologies, physical/chemical technologies still constitute the most popular treatments for the control of industrial N 2 O emissions at commercial scale. The recent advances achieved on biological N 2 O abatement based on heterotrophic denitrification have opened new opportunities for the development of eco-friendly alternatives for the treatment of N 2 O emissions. Finally, the main limitations and challenges faced by these novel N 2 O abatement biotechnologies are identified in order to pave the way for market implementation. Copyright © 2018 Elsevier Inc. All rights reserved.

  20. 32 CFR 516.9 - Service of criminal process within the United States.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Service of criminal process within the United... OF CIVIL AUTHORITIES AND PUBLIC RELATIONS LITIGATION Service of Process § 516.9 Service of criminal process within the United States. (a) Surrender of personnel. Guidance for surrender of military personnel...

  1. Electrochemical advanced oxidation processes: today and tomorrow. A review.

    Science.gov (United States)

    Sirés, Ignasi; Brillas, Enric; Oturan, Mehmet A; Rodrigo, Manuel A; Panizza, Marco

    2014-01-01

    In recent years, new advanced oxidation processes based on the electrochemical technology, the so-called electrochemical advanced oxidation processes (EAOPs), have been developed for the prevention and remediation of environmental pollution, especially focusing on water streams. These methods are based on the electrochemical generation of a very powerful oxidizing agent, such as the hydroxyl radical ((•)OH) in solution, which is then able to destroy organics up to their mineralization. EAOPs include heterogeneous processes like anodic oxidation and photoelectrocatalysis methods, in which (•)OH are generated at the anode surface either electrochemically or photochemically, and homogeneous processes like electro-Fenton, photoelectro-Fenton, and sonoelectrolysis, in which (•)OH are produced in the bulk solution. This paper presents a general overview of the application of EAOPs on the removal of aqueous organic pollutants, first reviewing the most recent works and then looking to the future. A global perspective on the fundamentals and experimental setups is offered, and laboratory-scale and pilot-scale experiments are examined and discussed.

  2. Improving the peer review process: an examination of commonalities between scholarly societies and knowledge networks

    Directory of Open Access Journals (Sweden)

    Susu Nousala

    2011-08-01

    Full Text Available Whilst peer review is the common form of scholarly refereeing, there are many differing aspects to this process. There is a view that the system is not without its faults and this has given rise to increasing discussion and examination of the process as a whole. Since the importance of peer review is based on the primary way in which quality control is asserted within the academic world, the concern is what impact this is having on an ever increasing diversity of scholarship, in particular, within and between science and engineering disciplines. The peer review process as is commonly understood, and increasingly considered as a conservative approach which is failing to adequately deal with the challenges of assessing interdisciplinary research, publications and outputs.

  3. Trends in Process Analytical Technology: Present State in Bioprocessing.

    Science.gov (United States)

    Jenzsch, Marco; Bell, Christian; Buziol, Stefan; Kepert, Felix; Wegele, Harald; Hakemeyer, Christian

    2017-08-04

    Process analytical technology (PAT), the regulatory initiative for incorporating quality in pharmaceutical manufacturing, is an area of intense research and interest. If PAT is effectively applied to bioprocesses, this can increase process understanding and control, and mitigate the risk from substandard drug products to both manufacturer and patient. To optimize the benefits of PAT, the entire PAT framework must be considered and each elements of PAT must be carefully selected, including sensor and analytical technology, data analysis techniques, control strategies and algorithms, and process optimization routines. This chapter discusses the current state of PAT in the biopharmaceutical industry, including several case studies demonstrating the degree of maturity of various PAT tools. Graphical Abstract Hierarchy of QbD components.

  4. The MIVS [Modular Integrated Video System] Image Processing System (MIPS) for assisting in the optical surveillance data review process

    International Nuclear Information System (INIS)

    Horton, R.D.

    1990-01-01

    The MIVS (Modular Integrated Video System) Image Processing System (MIPS) is designed to review MIVS surveillance data automatically and identify IAEA defined objects of safeguards interest. To achieve this, MIPS uses both digital image processing and neural network techniques to detect objects of safeguards interest in an image and assist an inspector in the review of the MIVS video tapes. MIPS must be ''trained'' i.e., given example images showing the objects that it must recognize, for each different facility. Image processing techniques are used to first identify significantly changed areas of the image. A neural network is then used to determine if the image contains the important object(s). The MIPS algorithms have demonstrated the capability to detect when a spent fuel shipping cask is present in an image after MIPS is properly trained to detect the cask. The algorithms have also demonstrated the ability to reject uninteresting background activities such as people and crane movement. When MIPS detects an important object, the corresponding image is stored to another media and later replayed for the inspector to review. The MIPS algorithms are being implemented in commercially available hardware: an image processing subsystem and an 80386 Personal Computer. MIPS will have a high-level easy-to-use system interface to allow inspectors to train MIPS on MIVS data from different facilities and on various safeguards significant objects. This paper describes the MIPS algorithms, hardware implementation, and system configuration. 3 refs., 10 figs

  5. Optimising the Efficacy of Hybrid Academic Teams: Lessons from a Systematic Review Process

    Science.gov (United States)

    Lake, Warren; Wallin, Margie; Boyd, Bill; Woolcott, Geoff; Markopoulos, Christos; Boyd, Wendy; Foster, Alan

    2018-01-01

    Undertaking a systematic review can have many benefits, beyond any theoretical or conceptual discoveries pertaining to the underlying research question. This paper explores the value of utilising a hybrid academic team when undertaking the systematic review process, and shares a range of practical strategies. The paper also comments on how such a…

  6. Power Laws in Stochastic Processes for Social Phenomena: An Introductory Review

    Science.gov (United States)

    Kumamoto, Shin-Ichiro; Kamihigashi, Takashi

    2018-03-01

    Many phenomena with power laws have been observed in various fields of the natural and social sciences, and these power laws are often interpreted as the macro behaviors of systems that consist of micro units. In this paper, we review some basic mathematical mechanisms that are known to generate power laws. In particular, we focus on stochastic processes including the Yule process and the Simon process as well as some recent models. The main purpose of this paper is to explain the mathematical details of their mechanisms in a self-contained manner.

  7. Solid Waste Processing. A State-of-the-Art Report on Unit Operations and Processes.

    Science.gov (United States)

    Engdahl, Richard B.

    The importance and intricacy of the solid wastes disposal problem and the need to deal with it effectively and economically led to the state-of-the-art survey covered by this report. The material presented here was compiled to be used by those in government and private industry who must make or implement decisions concerning the processing of…

  8. The United States spent fuel acceptance policy - A year in review

    International Nuclear Information System (INIS)

    Huizenga, David G.

    1997-01-01

    Through the combined efforts of the United States and many other nations participating in the Reduced Enrichment for Research and Test Reactors (RERTR) program, much progress has been made toward reducing the amount of highly enriched uranium (HEU) in international commerce. A little more than a year ago, the U.S. Department of Energy adopted a new 1 0-year policy to accept research reactor spent nuclear fuel into the United States from other nations. The policy supports U.S. nuclear weapons nonproliferation objectives and demonstrates the continued commitment of the U.S. to the RERTR program. This paper is a review of the past year's activities and addresses the progress made since the policy was implemented

  9. The effects of an editor serving as one of the reviewers during the peer-review process [version 1; referees: 1 approved, 2 approved with reservations

    Directory of Open Access Journals (Sweden)

    Marco Giordan

    2016-04-01

    Full Text Available Background Publishing in scientific journals is one of the most important ways in which scientists disseminate research to their peers and to the wider public. Pre-publication peer review underpins this process, but peer review is subject to various criticisms and is under pressure from growth in the number of scientific publications.   Methods Here we examine an element of the editorial process at eLife, in which the Reviewing Editor usually serves as one of the referees, to see what effect this has on decision times, decision type, and the number of citations. We analysed a dataset of 8,905 research submissions to eLife since June 2012, of which 2,750 were sent for peer review, using R and Python to perform the statistical analysis.   Results The Reviewing Editor serving as one of the peer reviewers results in faster decision times on average, with the time to final decision ten days faster for accepted submissions (n=1,405 and 5 days faster for papers that were rejected after peer review (n=1,099. There was no effect on whether submissions were accepted or rejected, and a very small (but significant effect on citation rates for published articles where the Reviewing Editor served as one of the peer reviewers.   Conclusions An important aspect of eLife’s peer-review process is shown to be effective, given that decision times are faster when the Reviewing Editor serves as a reviewer. Other journals hoping to improve decision times could consider adopting a similar approach.

  10. FEATURES OF THE SOCIO-POLITICAL PROCESS IN THE UNITED STATES

    Directory of Open Access Journals (Sweden)

    Tatyana Evgenevna Beydina

    2017-06-01

    Full Text Available The subject of this article is the study of political and social developments of the USA at the present stage. There are four stages of the American tradition of studying political processes. The first stage is connected with substantiation of the Executive, Legislative and Judicial branches of political system (works of F. Pollack and R. Sili. The second one includes behavioral studies of politics. Besides studying political processes Charles Merriam has studied their similarities and differences. The third stage is characterized by political system studies – the works of T. Parsons, D. Easton, R. Aron, G. Almond and K. Deutsch. The fourth stage is characterized by superpower and the systems democratization problem (S. Huntington, Zb. Bzhezinsky. American social processes were qualified by R. Park, P. Sorokin, E. Giddens. The work is concentrated on the divided explanation of social and political processes of the us and the reflection of unity of American social-political reality. Academic novelty is composed of substantiation of the US social-political process concept and characterization of its features. The US social-political process is characterized by two channels: soft power and aggression. Soft power appears in the US economy dominancy. The main results of the research are features of the socio-political process in the United States. Purpose: the main goal of the research is to systematize the definition of social-political process of the USA and estimate the line of its study within American political tradition. Methodology: in this article have used methods: such as system, comparison and historical analysis, structural-functional analysis. Results: during the research the analysis of the dynamics of social and political processes of the United States had been made. Practical implications it is expedient to apply the received results in the international relation theory and practice.

  11. Review of "Conceptual Structures: Information Processing in Mind and Machine."

    Science.gov (United States)

    Smoliar, Stephen W.

    This review of the book, "Conceptual Structures: Information Processing in Mind and Machine," by John F. Sowa, argues that anyone who plans to get involved with issues of knowledge representation should have at least a passing acquaintance with Sowa's conceptual graphs for a database interface. (Used to model the underlying semantics of…

  12. Review of computational fluid dynamics applications in biotechnology processes.

    Science.gov (United States)

    Sharma, C; Malhotra, D; Rathore, A S

    2011-01-01

    Computational fluid dynamics (CFD) is well established as a tool of choice for solving problems that involve one or more of the following phenomena: flow of fluids, heat transfer,mass transfer, and chemical reaction. Unit operations that are commonly utilized in biotechnology processes are often complex and as such would greatly benefit from application of CFD. The thirst for deeper process and product understanding that has arisen out of initiatives such as quality by design provides further impetus toward usefulness of CFD for problems that may otherwise require extensive experimentation. Not surprisingly, there has been increasing interest in applying CFD toward a variety of applications in biotechnology processing in the last decade. In this article, we will review applications in the major unit operations involved with processing of biotechnology products. These include fermentation,centrifugation, chromatography, ultrafiltration, microfiltration, and freeze drying. We feel that the future applications of CFD in biotechnology processing will focus on establishing CFD as a tool of choice for providing process understanding that can be then used to guide more efficient and effective experimentation. This article puts special emphasis on the work done in the last 10 years. © 2011 American Institute of Chemical Engineers

  13. Biological nitrate removal processes from drinking water supply-a review.

    Science.gov (United States)

    Mohseni-Bandpi, Anoushiravan; Elliott, David Jack; Zazouli, Mohammad Ali

    2013-12-19

    This paper reviews both heterotrophic and autotrophic processes for the removal of nitrate from water supplies. The most commonly used carbon sources in heterotrophic denitrification are methanol, ethanol and acetic acid. Process performance for each feed stock is compared with particular reference nitrate and nitrite residual and to toxicity potential. Autotrophic nitrate removal has the advantages of not requiring an organic carbon source; however the slow growth rate of autotrophic bacteria and low nitrate removal rate have contributed to the fact that relatively few full scale plants are in operation at the present time.

  14. Metal-free carbon materials-catalyzed sulfate radical-based advanced oxidation processes: A review on heterogeneous catalysts and applications.

    Science.gov (United States)

    Zhao, Qingxia; Mao, Qiming; Zhou, Yaoyu; Wei, Jianhong; Liu, Xiaocheng; Yang, Junying; Luo, Lin; Zhang, Jiachao; Chen, Hong; Chen, Hongbo; Tang, Lin

    2017-12-01

    In recent years, advanced oxidation processes (AOPs), especially sulfate radical based AOPs have been widely used in various fields of wastewater treatment due to their capability and adaptability in decontamination. Recently, metal-free carbon materials catalysts in sulfate radical production has been more and more concerned because these materials have been demonstrated to be promising alternatives to conventional metal-based catalysts, but the review of metal-free catalysts is rare. The present review outlines the current state of knowledge on the generation of sulfate radical using metal-free catalysts including carbon nanotubes, graphene, mesoporous carbon, activated carbon, activated carbon fiber, nanodiamond. The mechanism such as the radical pathway and non-radical pathway, and factors influencing of the activation of sulfate radical was also be revealed. Knowledge gaps and research needs have been identified, which include the perspectives on challenges related to metal-free catalyst, heterogeneous metal-free catalyst/persulfate systems and their potential in practical environmental remediation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Business Process Design Of An Efficient And Effective Literature Review

    Directory of Open Access Journals (Sweden)

    Sayuthi

    2015-08-01

    Full Text Available The objective of this articleis to design business processesan organization efficiently and effectively. Based on our literature review the design of business processes that is best suitable for an organization belongs to Harrington 1992 namely the concept of Business Process Improvement BPI which is a systematic framework that helps organizations in making significant progress in the implementation of business processes. BPI provides a system that will simplify or streamline business processes to provide an assurance that the internal and external customers of the organization will get a better output. One advantage of BPI concept suggested by Harrington is the continuous improvement whereas the other authorsor experts of BPI have not recognize the idea of continuous improvement. With thisidea the products services offered by organization becomes more innovative.

  16. The Wax and Wane of Narcissism: Grandiose Narcissism as a Process or State.

    Science.gov (United States)

    Giacomin, Miranda; Jordan, Christian H

    2016-04-01

    Though grandiose narcissism has predominantly been studied in structural terms-focused on individuals' general tendencies to be more or less narcissistic-we tested whether it also has a meaningful process or state component. Using a daily diary study methodology and multilevel modeling (N = 178 undergraduates, 146 female; Mage  = 18.86, SD = 2.21), we examine whether there is significant variability in daily state narcissism and whether this variability relates systematically to other psychological states (i.e., self-esteem, stress) and daily events. We assessed state narcissism and daily experiences over a 10-day period. We observed significant within-person variability in daily narcissism. Notably, this variability was not simply random error, as it related systematically to other psychological states and daily events. Specifically, state narcissism was higher when people experienced more positive agentic outcomes (e.g., having power over someone) or more positive communal outcomes (e.g., helping someone with a problem). State narcissism was lower on days people experienced greater felt stress. These relations held when state self-esteem, gender, and trait narcissism were controlled. These findings suggest that grandiose narcissism has a meaningful process or state component. © 2014 Wiley Periodicals, Inc.

  17. Present state and progress of industrial electron processing systems in Japan

    International Nuclear Information System (INIS)

    Sakamoto, I.; Mizusawa, K.

    1983-01-01

    A summary is given of the state of utilisation of electron processing systems in Japan, mainly for (1) cross-linking of wire and cable insulator, (2) heat shrinkable tube and sheet, (3) foamed polyethylene, and (4) curing of paint coats. Details are given of some of the electron processing systems. (U.K.)

  18. The Policy-Making Process of the State University System of Florida.

    Science.gov (United States)

    Sullivan, Sandra M.

    The policy-making process of the State University System of Florida is described using David Easton's model of a political system as the conceptual framwork. Two models describing the policy-making process were developed from personal interviews with the primary participants in the governance structure and from three case studies of policy…

  19. Assessment of Food Processing and Pharmaceutical Industrial Wastes as Potential Biosorbents: A Review

    Science.gov (United States)

    El-Sayed, Hanan E. M.; El-Sayed, Mayyada M. H.

    2014-01-01

    There is a growing need for the use of low-cost and ecofriendly adsorbents in water/wastewater treatment applications. Conventional adsorbents as well as biosorbents from different natural and agricultural sources have been extensively studied and reviewed. However, there is a lack of reviews on biosorption utilizing industrial wastes, particularly those of food processing and pharmaceuticals. The current review evaluates the potential of these wastes as biosorbents for the removal of some hazardous contaminants. Sources and applications of these biosorbents are presented, while factors affecting biosorption are discussed. Equilibrium, kinetics, and mechanisms of biosorption are also reviewed. In spite of the wide spread application of these biosorbents in the treatment of heavy metals and dyes, more research is required on other classes of pollutants. In addition, further work should be dedicated to studying scaling up of the process and its economic feasibility. More attention should also be given to enhancing mechanical strength, stability, life time, and reproducibility of the biosorbent. Environmental concerns regarding disposal of consumed biosorbents should be addressed by offering feasible biosorbent regeneration or pollutant immobilization options. PMID:25110656

  20. Assessment of food processing and pharmaceutical industrial wastes as potential biosorbents: a review.

    Science.gov (United States)

    El-Sayed, Hanan E M; El-Sayed, Mayyada M H

    2014-01-01

    There is a growing need for the use of low-cost and ecofriendly adsorbents in water/wastewater treatment applications. Conventional adsorbents as well as biosorbents from different natural and agricultural sources have been extensively studied and reviewed. However, there is a lack of reviews on biosorption utilizing industrial wastes, particularly those of food processing and pharmaceuticals. The current review evaluates the potential of these wastes as biosorbents for the removal of some hazardous contaminants. Sources and applications of these biosorbents are presented, while factors affecting biosorption are discussed. Equilibrium, kinetics, and mechanisms of biosorption are also reviewed. In spite of the wide spread application of these biosorbents in the treatment of heavy metals and dyes, more research is required on other classes of pollutants. In addition, further work should be dedicated to studying scaling up of the process and its economic feasibility. More attention should also be given to enhancing mechanical strength, stability, life time, and reproducibility of the biosorbent. Environmental concerns regarding disposal of consumed biosorbents should be addressed by offering feasible biosorbent regeneration or pollutant immobilization options.

  1. Profitability Analysis of Rice Processing and Marketing in Kano State ...

    African Journals Online (AJOL)

    Profitability Analysis of Rice Processing and Marketing in Kano State, Nigeria. ... added to the commodity at each stage in the study area and determine the most efficient services produce. ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  2. Implementation and evaluation of a peer review process for advanced practice nurses in a university hospital setting.

    Science.gov (United States)

    Bergum, Shelly K; Canaan, Talitha; Delemos, Christi; Gall, Elizabeth Funke; McCracken, Bonnie; Rowen, Dave; Salvemini, Steve; Wiens, Kimberly

    2017-07-01

    Over the past decade, implementation of the peer review process for the development of the advanced practice nurse (APN) has been emphasized. However, little exists in the literature regarding APN peer review. The peer review process is intended to help demonstrate competency of care, enhance quality improvement measures, and foster the professional growth of the APN. APNs serving on a professional governance council within a university teaching hospital developed a model of peer review for APNs. Nine months after the tool was implemented, an anonymous follow-up survey was conducted. A follow-up request was sent 4 weeks later to increase the number of respondents. Likert scales were used to elicit subjective data regarding the process. Of 81 APNs who participated in the survey, more than half (52%) felt that the process would directly improve their professional practice. Survey results show that the peer review process affected APN professional practice positively. Additional research might include pathways for remediation and education of staff, evaluation of alternate methods to improve application to clinical practice, and collection of outcome data. The models presented provide a foundation for future refinement to accommodate different APN practice settings. ©2017 American Association of Nurse Practitioners.

  3. Coating by the Cold Spray Process: a state of the art

    Directory of Open Access Journals (Sweden)

    Mario Guagliano

    2009-04-01

    Full Text Available A brief description of cold spray coating process is presented. This paper intends to review some the previous works which are mostly about the influences of the cold spray parameters, mostly the surface ofthe substrate, on the deposition efficiency (DE. Almost all the important parameters, with more focus on the roughness of the substrate, on increasing the DE are briefly studied; this review also includes a description of application of cold spray and of some important effect of this method on substrate properties.On this basis, some possible development in this field of research are drawn and discussed.

  4. A review of combined experimental and computational procedures for assessing biopolymer structure-process-property relationships.

    Science.gov (United States)

    Gronau, Greta; Krishnaji, Sreevidhya T; Kinahan, Michelle E; Giesa, Tristan; Wong, Joyce Y; Kaplan, David L; Buehler, Markus J

    2012-11-01

    Tailored biomaterials with tunable functional properties are desirable for many applications ranging from drug delivery to regenerative medicine. To improve the predictability of biopolymer materials functionality, multiple design parameters need to be considered, along with appropriate models. In this article we review the state of the art of synthesis and processing related to the design of biopolymers, with an emphasis on the integration of bottom-up computational modeling in the design process. We consider three prominent examples of well-studied biopolymer materials - elastin, silk, and collagen - and assess their hierarchical structure, intriguing functional properties and categorize existing approaches to study these materials. We find that an integrated design approach in which both experiments and computational modeling are used has rarely been applied for these materials due to difficulties in relating insights gained on different length- and time-scales. In this context, multiscale engineering offers a powerful means to accelerate the biomaterials design process for the development of tailored materials that suit the needs posed by the various applications. The combined use of experimental and computational tools has a very broad applicability not only in the field of biopolymers, but can be exploited to tailor the properties of other polymers and composite materials in general. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. [Impact of quality improvement process upon the state of nutritional support in a critical care unit].

    Science.gov (United States)

    Martinuzzi, A; Ferraresi, E; Orsati, M; Palaoro, A; Chaparro, J; Alcántara, S; Amin, C; Feller, C; Di Leo, M E; Guillot, A; García, V

    2012-01-01

    In a preceding article the state of Nutritional support (NS) in an Intensive Care Unit (ICU) was documented [Martinuzzi A et al. Estado del soporte nutricional en una unidad de Cuidados críticos. RNC 2011; 20: 5-17]. In this follow-up work we set to assess the impact of several organizational, recording and educational interventions upon the current state of NS processes. Interventions comprised presentation of the results of the audit conducted at the ICU before the institution's medical as well as paramedical personnel; their publication in a periodical, peer-reviewed journal; drafting and implementation of a protocol regulating NS schemes to be carried out at the ICU; and conduction of continuous education activities on Nutrition (such as "experts talks", interactive courses, and training in the implementation of the NS protocol). The state of NS processes documented after the interventions was compared with the results annotated in the preceding article. Study observation window ran between March the 1st, 2011 and May 31th, 2011, both included. Study series differed only regarding overall-mortality: Phase 1: 40.0% vs. Phase 2: 20.5%; Difference: 19.5%; Z = 1.927; two-tailed-p = 0.054. Interventions resulted in a higher fulfillment rate of the prescribed NS indication; an increase in the number of patients receiving ≥ 80% of prescribed energy; and a reduction in the number of NS lost days. Mortality was (numerically) lower in patients in which the prescribed NS scheme was fulfilled, NS was early initiated, and whom received ≥ 80% of prescribed energy. Adopted interventions had no effect upon average energy intakes: Phase 1: 574.7 ± 395.3 kcal/24 h⁻¹ vs. Phase 2: 591.1 ± 315.3 kcal/24 h⁻¹; two-tailed-p > 0.05. Educational, recording and organizational interventions might result in a better conduction of NS processes, and thus, in a lower mortality. Hemodynamic instability is still the most formidable obstacle for initiating and completing NS.

  6. Processes of Quantum Associative Memory (QuAM) Through New Maximally Entangled States (Singh-Rajput MES)

    Science.gov (United States)

    Singh, Manu Pratap; Rajput, B. S.

    2016-07-01

    Using Singh-Rajput MES as memory states in the evolutionary process of pattern storage and the non-evolutionary process of pattern recall (the two fundamental constituents of QuAM), the suitability and superiority of these MES over Bell's MES have been demonstrated in both these processes. It has been shown that, under the operations of all the possible memorization operators for a two-qubit system, the first two states of Singh-Rajput MES are useful for storing the pattern |11> and the last two of these MES are useful in storing the pattern |10> while Bell's MES are not much suitable as memory states in a valid memorization process. The recall operations have also been conducted by separately choosing Singh-Rajput MES and Bell's MES as memory states for possible various queries and it has been shown that in each case the choices of Singh-Rajput MES as valid memory states are much more suitable than those of Bell's MES.

  7. The effects of an editor serving as one of the reviewers during the peer-review process [version 2; referees: 2 approved, 1 approved with reservations

    Directory of Open Access Journals (Sweden)

    Marco Giordan

    2016-10-01

    Full Text Available Background Publishing in scientific journals is one of the most important ways in which scientists disseminate research to their peers and to the wider public. Pre-publication peer review underpins this process, but peer review is subject to various criticisms and is under pressure from growth in the number of scientific publications.   Methods Here we examine an element of the editorial process at eLife, in which the Reviewing Editor usually serves as one of the referees, to see what effect this has on decision times, decision type, and the number of citations. We analysed a dataset of 8,905 research submissions to eLife since June 2012, of which 2,747 were sent for peer review. This subset of 2747 papers was then analysed in detail.     Results The Reviewing Editor serving as one of the peer reviewers results in faster decision times on average, with the time to final decision ten days faster for accepted submissions (n=1,405 and five days faster for papers that were rejected after peer review (n=1,099. Moreover, editors acting as reviewers had no effect on whether submissions were accepted or rejected, and a very small (but significant effect on citation rates.   Conclusions An important aspect of eLife’s peer-review process is shown to be effective, given that decision times are faster when the Reviewing Editor serves as a reviewer. Other journals hoping to improve decision times could consider adopting a similar approach.

  8. Electron beam processing of fresh produce - A critical review

    Science.gov (United States)

    Pillai, Suresh D.; Shayanfar, Shima

    2018-02-01

    To meet the increasing global demand for fresh produce, robust processing methods that ensures both the safety and quality of fresh produce are needed. Since fresh produce cannot withstand thermal processing conditions, most of common safety interventions used in other foods are ineffective. Electron beam (eBeam) is a non-thermal technology that can be used to extend the shelf life and ensure the microbiological safety of fresh produce. There have been studies documenting the application of eBeam to ensure both safety and quality in fresh produce, however, there are still unexplored areas that still need further research. This is a critical review on the current literature on the application of eBeam technology for fresh produce.

  9. Monitoring of anaerobic digestion processes: A review perspective

    DEFF Research Database (Denmark)

    Madsen, Michael; Holm-Nielsen, Jens Bo; Esbensen, Kim

    2011-01-01

    to a new level of reliability and effectiveness. It is shown, how proper involvement of process sampling understanding, Theory of Sampling (TOS), constitutes a critical success factor. We survey the more recent trends within the field of AD monitoring and the powerful PAT/TOS/chemometrics application...... processes, sanitation of industrial organic waste, and benefits from degassing of manure are a few of the most important applications. Especially, renewable energy production, integrated biorefining concepts, and advanced waste handling are delineated as the major market players for AD that likely...... will expand rapidly in the near future. The complex, biologically mediated AD events are far from being understood in detail however. Despite decade-long serious academic and industrial research efforts, only a few general rules have been formulated with respect to assessing the state of the process from...

  10. National Systematic Legal Review of State Policies on Emergency Medical Services Licensure Levels' Authority to Administer Opioid Antagonists.

    Science.gov (United States)

    Kinsman, Jeremiah M; Robinson, Kathy

    2018-02-27

    Previous research conducted in November 2013 found there were a limited number of states and territories in the United States (US) that authorize emergency medical technicians (EMTs) and emergency medical responders (EMRs) to administer opioid antagonists. Given the continued increase in the number of opioid-related overdoses and deaths, many states have changed their policies to authorize EMTs and EMRs to administer opioid antagonists. The goal of this study is to provide an updated description of policy on EMS licensure levels' authority to administer opioid antagonists for all 50 US states, the District of Columbia (DC), and the Commonwealth of Puerto Rico (PR). State law and scopes of practice were systematically reviewed using a multi-tiered approach to determine each state's legally-defined EMS licensure levels and their authority to administer an opioid antagonist. State law, state EMS websites, and state EMS scope of practice documents were identified and searched using Google Advanced Search with Boolean Search Strings. Initial results of the review were sent to each state office of EMS for review and comment. As of September 1, 2017, 49 states and DC authorize EMTs to administer an opioid antagonist. Among the 40 US jurisdictions (39 states and DC) that define the EMR or a comparable first responder licensure level in state law, 37 states and DC authorize their EMRs to administer an opioid antagonist. Paramedics are authorized to administer opioid antagonists in all 50 states, DC, and PR. All 49 of the US jurisdictions (48 states and DC) that define the advanced emergency medical technician (AEMT) or a comparable intermediate EMS licensure level in state law authorize their AEMTs to administer an opioid antagonist. 49 out of 52 US jurisdictions (50 states, DC, and PR) authorize all existing levels of EMS licensure levels to administer an opioid antagonist. Expanding access to this medication can save lives, especially in communities that have limited

  11. Modelling dynamic processes in a nuclear reactor by state change modal method

    Science.gov (United States)

    Avvakumov, A. V.; Strizhov, V. F.; Vabishchevich, P. N.; Vasilev, A. O.

    2017-12-01

    Modelling of dynamic processes in nuclear reactors is carried out, mainly, using the multigroup neutron diffusion approximation. The basic model includes a multidimensional set of coupled parabolic equations and ordinary differential equations. Dynamic processes are modelled by a successive change of the reactor states. It is considered that the transition from one state to another occurs promptly. In the modal method the approximate solution is represented as eigenfunction expansion. The numerical-analytical method is based on the use of dominant time-eigenvalues of a group diffusion model taking into account delayed neutrons.

  12. 30 CFR 773.11 - Review of compliance history.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Review of compliance history. 773.11 Section... REGULATORY PROGRAMS REQUIREMENTS FOR PERMITS AND PERMIT PROCESSING § 773.11 Review of compliance history. (a... histories of compliance with the Act or the applicable State regulatory program, and any other applicable...

  13. Consumption of ultra-processed foods and body fat during childhood and adolescence: a systematic review.

    Science.gov (United States)

    Costa, Caroline Santos; Del-Ponte, Bianca; Assunção, Maria Cecília Formoso; Santos, Iná Silva

    2018-01-01

    To review the available literature on the association between consumption of ultra-processed foods and body fat during childhood and adolescence. A systematic review was conducted in the PubMed, Web of Science and LILACS databases. Studies that evaluated the association between consumption of ultra-processed food (exposure) and body fat (outcome) during childhood and adolescence were eligible. Healthy children and adolescents. Twenty-six studies that evaluated groups of ultra-processed foods (such as snacks, fast foods, junk foods and convenience foods) or specific ultra-processed foods (soft drinks/sweetened beverages, sweets, chocolate and ready-to-eat cereals) were selected. Most of the studies (n 15) had a cohort design. Consumption was generally evaluated by means of FFQ or food records; and body composition, by means of double indirect methods (bioelectrical impedance analysis and skinfolds). Most of the studies that evaluated consumption of groups of ultra-processed foods and soft drinks/sweetened beverages found positive associations with body fat. Our review showed that most studies have found positive associations between consumption of ultra-processed food and body fat during childhood and adolescence. There is a need to use a standardized classification that considers the level of food processing to promote comparability between studies.

  14. Prevalence of type 2 diabetes in the States of the co-operation council for the Arab States of the Gulf: a systematic review.

    Directory of Open Access Journals (Sweden)

    Layla Alhyas

    Full Text Available The recent and ongoing worldwide expansion in prevalence of Type 2 Diabetes (T2DM is a considerable risk to individuals, health systems and economies. The increase in prevalence has been particularly marked in the states of the Co-operation Council for the Arab States of the Gulf (GCC, and these trends are set to continue. We aimed to systematically review the current prevalence of T2DM within these states, and also within particular sub-populations.We identified 27 published studies for review. Studies were identified by systematic database searches. Medline and Embase were searched using terms such as diabetes mellitus, non-insulin-dependent, hyperglycemia, prevalence, epidemiology and Gulf States. Our search also included scanning reference lists, contacting experts and hand-searching key journals. Studies were judged against pre-determined inclusion and exclusion criteria, and where suitable for inclusion, data extraction and quality assessment was achieved using a specifically-designed tool. All studies where prevalence of diabetes was investigated were eligible for inclusion. The inclusion criteria required that the study population be of a GCC country, but otherwise all ages, sexes and ethnicities were included, resident and migrant populations, urban and rural, of all socioeconomic and educational backgrounds. No limitations on publication type, publication status, study design or language of publication were imposed. However, we did not include secondary reports of data, such as review articles without novel data synthesis.The prevalence of T2DM is an increasing problem for all GCC states. They may therefore benefit to a relatively high degree from co-ordinated implementation of broadly consistent management strategies. Further study of prevalence in children and in national versus expatriate populations would also be useful.

  15. State of the art report on design for X

    DEFF Research Database (Denmark)

    Papanikolaou, Apostolos; Andersen, Poul; Kristensen, Hans Otto Holmegaard

    2009-01-01

    The present State of the Art report aims at defining and reviewing the curent state of the ship design process in the frame of a holistic approach, accounting for various objectives and constraints. The report addresses mainly the design of transportation carriers, though some covered aspects...

  16. Challenges and opportunities for policy decisions to address health equity in developing health systems: case study of the policy processes in the Indian state of Orissa

    Directory of Open Access Journals (Sweden)

    Gopalan Saji S

    2011-11-01

    Full Text Available Abstract Introduction Achieving health equity is a pertinent need of the developing health systems. Though policy process is crucial for planning and attaining health equity, the existing evidences on policy processes are scanty in this regard. This article explores the magnitude, determinants, challenges and prospects of 'health equity approach' in various health policy processes in the Indian State of Orissa - a setting comparable with many other developing health systems. Methods A case-study involving 'Walt-Gilson Policy Triangle' employed key-informant interviews and documentary reviews. Key informants (n = 34 were selected from the departments of Health and Family Welfare, Rural Development, and Women and Child Welfare, and civil societies. The documentary reviews involved various published and unpublished reports, policy pronouncements and articles on health equity in Orissa and similar settings. Results The 'health policy agenda' of Orissa was centered on 'health equity' envisaging affordable and equitable healthcare to all, integrated with public health interventions. However, the subsequent stages of policy process such as 'development, implementation and evaluation' experienced leakage in the equity approach. The impediment for a comprehensive approach towards health equity was the nexus among the national and state health priorities; role, agenda and capacity of actors involved; and existing constraints of the healthcare delivery system. Conclusion The health equity approach of policy processes was incomprehensive, often inadequately coordinated, and largely ignored the right blend of socio-medical determinants. A multi-sectoral, unified and integrated approach is required with technical, financial and managerial resources from different actors for a comprehensive 'health equity approach'. If carefully geared, the ongoing health sector reforms centered on sector-wide approaches, decentralization, communitization and involvement of

  17. Efficient thermal desalination technologies with renewable energy systems: A state-of-the-art review

    Energy Technology Data Exchange (ETDEWEB)

    Esfahani, Iman Janghorban; Rashidi, Jouan; Ifaei, Pouya; Yoo, ChangKyoo [Center for Environmental Studies, Kyung Hee University, Yongin (Korea, Republic of)

    2016-02-15

    Due to the current fossil fuel crisis and associated adverse environmental impacts, renewable energy sources (RES) have drawn interest as alternatives to fossil fuels for powering water desalination systems. Over the last few decades the utility of renewable energy sources such as solar, geothermal, and wind to run desalination processes has been explored. However, the expansion of these technologies to larger scales is hampered by techno-economic and thermo-economic challenges. This paper reviews the state-of-the-art in the field of renewable energy-powered thermal desalination systems (RE-PTD) to compare their productivity and efficiency through thermodynamic, economic, and environmental analyses. We performed a comparative study using published data to classify RE-PTD systems technologies on the basis of the energy collection systems that they use. Among RE-PTD systems, solar energy powered-thermal desalination systems demonstrate high thermo-environ-economic efficiency to produce fresh water to meet various scales of demand.

  18. Efficient thermal desalination technologies with renewable energy systems: A state-of-the-art review

    International Nuclear Information System (INIS)

    Esfahani, Iman Janghorban; Rashidi, Jouan; Ifaei, Pouya; Yoo, ChangKyoo

    2016-01-01

    Due to the current fossil fuel crisis and associated adverse environmental impacts, renewable energy sources (RES) have drawn interest as alternatives to fossil fuels for powering water desalination systems. Over the last few decades the utility of renewable energy sources such as solar, geothermal, and wind to run desalination processes has been explored. However, the expansion of these technologies to larger scales is hampered by techno-economic and thermo-economic challenges. This paper reviews the state-of-the-art in the field of renewable energy-powered thermal desalination systems (RE-PTD) to compare their productivity and efficiency through thermodynamic, economic, and environmental analyses. We performed a comparative study using published data to classify RE-PTD systems technologies on the basis of the energy collection systems that they use. Among RE-PTD systems, solar energy powered-thermal desalination systems demonstrate high thermo-environ-economic efficiency to produce fresh water to meet various scales of demand.

  19. Mechanical properties of copper processed by Equal Channel Angular Pressing – a review

    Directory of Open Access Journals (Sweden)

    Ludvík Kunz

    2012-01-01

    Full Text Available The Equal Channel Angular Pressing is a hardening treatment with which ductile metals can be processed to refine their grain and sub-grain structure. This process enhances the mechanical strength of metals in terms of tensile strength, stress-controlled fatigue strength, and fatigue crack growth resistance. In this paper the authors draw a review of the major results of a wide research activity they carried out on a copper microstructure processed by Equal Channel Angular Pressing. The essential results are that tensile and fatigue strengths of the so obtained refined structure are improved by a factor of two with respect to the original coarse-grained metal. The fatigue crack initiation mechanism and the stability of the refined microstructure under cyclic loading are topics also discussed, evidencing the essential role of the process and of the material parameter, as the content of impurities in the microstructure. In this review, the authors also underline some critical aspects that have to be more investigated.

  20. Hydrogen from food processing wastes via photofermentation using Purple Non-sulfur Bacteria (PNSB) – A review

    International Nuclear Information System (INIS)

    Ghosh, Shiladitya; Dairkee, Umme Kulsoom; Chowdhury, Ranjana; Bhattacharya, Pinaki

    2017-01-01

    Highlights: • Food processing wastes/wastewaters are potential feedstocks for PNSB-bioH_2 systems. • Several bottlenecks exist in efficient usage of food processing wastes/wastewaters by PNSBs. • Pretreatment of feedstocks is a challenging issue. • Genetic modification significantly enhances the H_2 outcome of PNSBs. • Food waste/wastewater - PNSB is a sustainable combination for production of H_2. - Abstract: Purple non-sulfur bacteria (PNSB) mediated production of biohydrogen utilizing solid food waste and food processing wastewater possess enormous potential to be implemented as an ideal “green energy technology”. This paper reviews the current state-of-the-art utilization of solid wastes and wastewaters of several food and beverage processing industries in photofermentative H_2 production systems. Detailed accounts of the complex composition of various solid food wastes and food processing wastewaters along with the pretreatments used for enhancement of H_2 production by PNSBs have been presented. Factors like compositional complexity, presence of inhibitory compounds and resistance to light penetration are identified as the prime bottlenecks hindering the efficient utilization of food waste and wastewaters in photofermentative H_2 production. Genetic manipulation of the PNSBs to overcome the inherent metabolic complications has been discussed as a probable amelioration strategy for enhancement of H_2 yield. Based on profound discussions the scopes for upgradation of the photofermentative biohydrogen systems using food waste/wastewater have been highlighted and recommended for the overall enhancement of the sustainability of the processes.

  1. A Review of Literature on analysis of JIG Grinding Process

    DEFF Research Database (Denmark)

    Sudheesh, P. K.; Puthumana, Govindan

    2016-01-01

    Jig grinding is a process practically used by tool and die makers in the creation of jigs or mating holes and pegs on dies.The abrasives normally used in jig grinding are divided into Natural Abrasives and Artificial Abrasives. Artificial Abrasiveare preferred in manufacturing of grinding wheels...... in jig grinding, because of their uniformity and purity. In this paper, abrief review of the analysis of jig grinding process considering various research trends is presented. The areas highlighted are: optimization, selection of abrasives, selection of processing conditions and practical considerations....... The optimization of parameters in jig grinding process is important to maximize productivity and to improve quality. The abrasives of hard jig grinding wheels get blunt quickly so these are recommended to grind workpiece of low hardness and soft grinding wheels are recommended for hard material workpieces. The jig...

  2. Property impacts on Carbon Capture and Storage (CCS) processes: A review

    International Nuclear Information System (INIS)

    Tan, Yuting; Nookuea, Worrada; Li, Hailong; Thorin, Eva; Yan, Jinyue

    2016-01-01

    Highlights: • Property impacts on CCS processes have been reviewed. • Properties were ranked and priority of properties in model development was analyzed. • Relevant properties in the design and operation of CCS processes have been identified. • The studied CCS processes include CO_2 capture, conditioning, transport and storage. - Abstract: The knowledge of thermodynamic and transport properties of CO_2-mixtures is important for designing and operating different processes in carbon capture and storage systems. A literature survey was conducted to review the impact of uncertainty in thermos-physical properties on the design and operation of components and processes involved in CO_2 capture, conditioning, transport and storage. According to the existing studies on property impacts, liquid phase viscosity and diffusivity as well as gas phase diffusivity significantly impact the process simulation and absorber design for chemical absorption. Moreover, the phase equilibrium is important for regenerating energy estimation. For CO_2 compression and pumping processes, thermos-physical properties have more obvious impacts on pumps than on compressors. Heat capacity, density, enthalpy and entropy are the most important properties in the pumping process, whereas the compression process is more sensitive to heat capacity and compressibility. In the condensation and liquefaction process, the impacts of density, enthalpy and entropy are low on heat exchangers. For the transport process, existing studies mainly focused on property impacts on the performance of pipeline steady flow processes. Among the properties, density and heat capacity are most important. In the storage process, density and viscosity have received the most attention in property impact studies and were regarded as the most important properties in terms of storage capacity and enhanced oil recovery rate. However, for physical absorption, physical adsorption and membrane separation, there has been a

  3. Licence renewal in the United States - enhancing the process through lessons learned

    International Nuclear Information System (INIS)

    Walters, D.J.

    2000-01-01

    The Nuclear Energy Institute (NEI) is the Washington based policy organisation representing the broad and varied interests of the diverse nuclear energy industry. It comprises nearly 300 corporate members in 15 countries with a budget last year of about USD 26.5 million. It has been working for 10 years with the Nuclear Regulatory Commission (NRC), colleagues in the industry and others to demonstrate that license renewal is a safe and workable process. The first renewed license was issued on 24 March to BGE for the the Calvert Cliffs plant. One month later the NRC issued the renewed license for the Ocoenne plant. By 'Enhancing the process through lessons learned', we mean reducing the uncertainty in the license renewal process. This is achieved through lessons learned from the net wave of applicants and the reviews of the Calvert Cliffs and Ocoenne applications. Three areas will be covered: - Incentive for minimising uncertainty as industry interest in license renewal is growing dramatically. - Rigorous reviews by Nuclear Regulatory Commission assure continued safety: process put in place by the Nuclear Regulatory Commission to assure safety throughout the license renewal term, specifically areas where the lessons learned suggest improvements can be made. - Lessons learned have identified enhancements to the process: numerous benefits associated with renewal of nuclear power plant licenses for consumers of electricity, the environment, the nuclear operating companies and the nation. (author)

  4. Changes in mental state associated with prison environments: a systematic review.

    Science.gov (United States)

    Walker, J; Illingworth, C; Canning, A; Garner, E; Woolley, J; Taylor, P; Amos, T

    2014-06-01

    To develop an understanding of the stability of mental health during imprisonment through review of existing research evidence relating physical prison environment to mental state changes in prisoners. A systematic literature search was conducted looking at changes in mental state and how this related to various aspects of imprisonment and the prison environment. Fifteen longitudinal studies were found, and from these, three broad themes were delineated: being imprisoned and aspects of the prison regime; stage of imprisonment and duration of sentence; and social density. Reception into prison results in higher levels of psychiatric symptoms that seem to improve over time; otherwise, duration of imprisonment appears to have no significant impact on mental health. Regardless of social density, larger prisons are associated with poorer mental state, as are extremes of social density. There are large gaps in the literature relating prison environments to changes in mental state; in particular, high-quality longitudinal studies are needed. Existing research suggests that although entry to prison may be associated with deterioration in mental state, it tends to improve with time. Furthermore, overcrowding, ever more likely as prison populations rise, is likely to place a particular burden on mental health services. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  5. Condensation in models with factorized and pair-factorized stationary states

    International Nuclear Information System (INIS)

    Evans, M R; Waclaw, B

    2015-01-01

    Non-equilibrium real-space condensation is a phenomenon in which a finite fraction of some conserved quantity (mass, particles, etc) becomes spatially localized. We review two popular stochastic models of hopping particles that lead to condensation and whose stationary states assume a factorized form: the zero-range process and the misanthrope process, and their various generalizations. We also introduce a new model—a misanthrope process with parallel dynamics—that exhibits condensation and has a pair-factorized stationary state

  6. Review: Semen sexing - current state of the art with emphasis on bovine species.

    Science.gov (United States)

    Vishwanath, R; Moreno, J F

    2018-06-01

    It is approaching three decades since the first public evidence of sex-sorting of semen. The technology has progressed considerably since then with a number of institutions and researchers collaborating to eventually bring this to application. The technical challenges have been quite substantial and in the early years the application was limited to only heifer inseminations. Comparable fertility of sex-sorted semen with conventional semen has been an aspirational benchmark for the industry for many years. Significant investment in research in the primary biology of sex-sorted sperm and associated sorting equipment ensured steady progress over the years and current methods particularly the new SexedULTRA-4M™ seems to have now mostly bridged this fertility gap. The dairy and beef industry have adopted this technology quite rapidly. Other animal industries are progressively testing it for application in their specific niches and environments. The current state of the art in the fundamentals of sex-sorting, the biology of the process as well as new developments in machinery are described in this review.

  7. A review on the processing accuracy of two-photon polymerization

    Directory of Open Access Journals (Sweden)

    Xiaoqin Zhou

    2015-03-01

    Full Text Available Two-photon polymerization (TPP is a powerful and potential technology to fabricate true three-dimensional (3D micro/nanostructures of various materials with subdiffraction-limit resolution. And it has been applied to microoptics, electronics, communications, biomedicine, microfluidic devices, MEMS and metamaterials. These applications, such as microoptics and photon crystals, put forward rigorous requirements on the processing accuracy of TPP, including the dimensional accuracy, shape accuracy and surface roughness and the processing accuracy influences their performance, even invalidate them. In order to fabricate precise 3D micro/nanostructures, the factors influencing the processing accuracy need to be considered comprehensively and systematically. In this paper, we review the basis of TPP micro/nanofabrication, including mechanism of TPP, experimental set-up for TPP and scaling laws of resolution of TPP. Then, we discuss the factors influencing the processing accuracy. Finally, we summarize the methods reported lately to improve the processing accuracy from improving the resolution and changing spatial arrangement of voxels.

  8. A review on the processing accuracy of two-photon polymerization

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Xiaoqin; Hou, Yihong [School of Mechanical Science and Engineering, Jilin University, Changchun, 130022 (China); Lin, Jieqiong, E-mail: linjieqiong@mail.ccut.edu.cn [School of Electromechanical Engineering, Changchun University of Technology, Changchun, 130012 (China)

    2015-03-15

    Two-photon polymerization (TPP) is a powerful and potential technology to fabricate true three-dimensional (3D) micro/nanostructures of various materials with subdiffraction-limit resolution. And it has been applied to microoptics, electronics, communications, biomedicine, microfluidic devices, MEMS and metamaterials. These applications, such as microoptics and photon crystals, put forward rigorous requirements on the processing accuracy of TPP, including the dimensional accuracy, shape accuracy and surface roughness and the processing accuracy influences their performance, even invalidate them. In order to fabricate precise 3D micro/nanostructures, the factors influencing the processing accuracy need to be considered comprehensively and systematically. In this paper, we review the basis of TPP micro/nanofabrication, including mechanism of TPP, experimental set-up for TPP and scaling laws of resolution of TPP. Then, we discuss the factors influencing the processing accuracy. Finally, we summarize the methods reported lately to improve the processing accuracy from improving the resolution and changing spatial arrangement of voxels.

  9. The nurses' work process in different countries: an integrative review

    Directory of Open Access Journals (Sweden)

    Juliana Alves Leite Leal

    Full Text Available ABSTRACT Objective: To analyze the characteristics of nurses' work process in different countries. Method: We have used the integrative review method and selected 84 publications (articles, theses and dissertations in national and foreign thesis banks and databases. We analyzed the evidence based on dialectical materialism. Results: The rejection of managerial tasks hides the singularity of nurses' work, due to the failure to understand the inseparable nature of managerial and healthcare tasks, given that it is what provides the expertise to coordinate the nursing work process and guide the healthcare work processes. The social and technical division is present in the work process in all countries studied, albeit in different ways. The nurse's position in the healthcare work process is subordinated to that of the physician. Conclusion: The characteristics are similar. The rejection of the dual nature of the work by nurses themselves due to alienation results in the non-recognition of their own work.

  10. A review of breast tomosynthesis. Part II. Image reconstruction, processing and analysis, and advanced applications

    Science.gov (United States)

    Sechopoulos, Ioannis

    2013-01-01

    Many important post-acquisition aspects of breast tomosynthesis imaging can impact its clinical performance. Chief among them is the reconstruction algorithm that generates the representation of the three-dimensional breast volume from the acquired projections. But even after reconstruction, additional processes, such as artifact reduction algorithms, computer aided detection and diagnosis, among others, can also impact the performance of breast tomosynthesis in the clinical realm. In this two part paper, a review of breast tomosynthesis research is performed, with an emphasis on its medical physics aspects. In the companion paper, the first part of this review, the research performed relevant to the image acquisition process is examined. This second part will review the research on the post-acquisition aspects, including reconstruction, image processing, and analysis, as well as the advanced applications being investigated for breast tomosynthesis. PMID:23298127

  11. Enzyme-based solutions for textile processing and dye contaminant biodegradation-a review.

    Science.gov (United States)

    Chatha, Shahzad Ali Shahid; Asgher, Muhammad; Iqbal, Hafiz M N

    2017-06-01

    The textile industry, as recognized conformist and stake industry in the world's economy, is facing serious environmental challenges. In numerous industries, in practice, various chemical-based processes from initial sizing to final washing are fascinating harsh environment concerns. Some of these chemicals are corrosive to equipment and cause serious damage itself. Therefore, in the twenty-first century, chemical and allied industries quest a paradigm transition from traditional chemical-based concepts to a greener, sustainable, and environmentally friendlier catalytic alternative, both at the laboratory and industrial scales. Bio-based catalysis offers numerous benefits in the context of biotechnological industry and environmental applications. In recent years, bio-based processing has received particular interest among the scientist for inter- and multi-disciplinary investigations in the areas of natural and engineering sciences for the application in biotechnology sector at large and textile industries in particular. Different enzymatic processes such as chemical substitution have been developed or in the process of development for various textile wet processes. In this context, the present review article summarizes current developments and highlights those areas where environment-friendly enzymatic textile processing might play an increasingly important role in the textile industry. In the first part of the review, a special focus has been given to a comparative discussion of the chemical-based "classical/conventional" treatments and the modern enzyme-based treatment processes. Some relevant information is also reported to identify the major research gaps to be worked out in future.

  12. 7 CFR 275.13 - Review of negative cases.

    Science.gov (United States)

    2010-01-01

    ... State systems, the review date for negative cases could be the date of the agency's decision to deny... household which was listed incorrectly in the negative frame. (f) Demonstration projects/SSA processing. A... 7 Agriculture 4 2010-01-01 2010-01-01 false Review of negative cases. 275.13 Section 275.13...

  13. The advantages of using standardized review procedures in certifying type B radioactive material packages

    International Nuclear Information System (INIS)

    Easton, E.P.; Faille, S.

    2004-01-01

    This paper presents the advantages of adopting well-documented standardized review practices for reviewing Type B package designs. The US experience using standardized review plans and guidance has shown them to be a valuable tool in achieving more consistent and efficient package reviews, in training and qualifying technical reviewers, and in enhancing public and industry understanding of the package certification process. In addition, the standardized review practices, as living documents, have proven to be an effective method of incorporating new technical advances into the review process, and have provided a vehicle to make that knowledge widely available to fellow reviewers, the public and industry. Canada implemented a new internal review process in early 2003 to standardize the review of applications for certification of Type B Packages. Based on the similarity of these approaches, the United States and Canada have started discussions on a A North American System for the unilateral approval of Type B (U) packages. This initiative is looking into how each country is currently reviewing transportation package applications to see if agreement can be reached on accepting Type B certifications on a reciprocal basis, i.e., without additional review. Based on the experience in Canada and the United States, the authors believe that the use of standardized review processes, coupled with the knowledge and experience resident in IAEA's Transportation Advisory Material (TS-G-1.1) and series of TECDOCS, could also be used to develop a standard internationally accepted review process that could enhance the acceptance of unilateral approvals for Type B packages

  14. The advantages of using standardized review procedures in certifying type B radioactive material packages

    Energy Technology Data Exchange (ETDEWEB)

    Easton, E.P. [United States Nuclear Regulatory Commission, Washington, DC (United States); Faille, S. [Canadian Nuclear Safety Commission, Ottawa (Canada)

    2004-07-01

    This paper presents the advantages of adopting well-documented standardized review practices for reviewing Type B package designs. The US experience using standardized review plans and guidance has shown them to be a valuable tool in achieving more consistent and efficient package reviews, in training and qualifying technical reviewers, and in enhancing public and industry understanding of the package certification process. In addition, the standardized review practices, as living documents, have proven to be an effective method of incorporating new technical advances into the review process, and have provided a vehicle to make that knowledge widely available to fellow reviewers, the public and industry. Canada implemented a new internal review process in early 2003 to standardize the review of applications for certification of Type B Packages. Based on the similarity of these approaches, the United States and Canada have started discussions on a A North American System for the unilateral approval of Type B (U) packages. This initiative is looking into how each country is currently reviewing transportation package applications to see if agreement can be reached on accepting Type B certifications on a reciprocal basis, i.e., without additional review. Based on the experience in Canada and the United States, the authors believe that the use of standardized review processes, coupled with the knowledge and experience resident in IAEA's Transportation Advisory Material (TS-G-1.1) and series of TECDOCS, could also be used to develop a standard internationally accepted review process that could enhance the acceptance of unilateral approvals for Type B packages.

  15. 78 FR 18481 - Project-Level Predecisional Administrative Review Process

    Science.gov (United States)

    2013-03-27

    ... respondents expressed a preference for the post- decisional appeal process. One respondent stated that ``It is... this time are somewhat limited, but the final rule does include some modifications in response to the... provision allowing for extension of time to file appeals or objections. These procedures have been in place...

  16. Peer-Review of Digital Educational Resources--A Rigorous Review Process Developed by the Climate Literacy and Energy Awareness Network (CLEAN)

    Science.gov (United States)

    Gold, Anne U.; Ledley, Tamara Shapiro; Buhr, Susan M.; Fox, Sean; McCaffrey, Mark; Niepold, Frank; Manduca, Cathy; Lynds, Susan E.

    2012-01-01

    Educators seek to develop 21st century skills in the classroom by incorporating educational materials other than textbooks into their lessons, such as digitally available activities, videos, and visualizations. A problem that educators face is that no review process similar to the formal adoption processes used for K-12 textbooks or the…

  17. Welding processes for Inconel 718- A brief review

    Science.gov (United States)

    Tharappel, Jose Tom; Babu, Jalumedi

    2018-03-01

    Inconel 718 is being extensively used for high-temperature applications, rocket engines, gas turbines, etc. due to its ability to maintain high strength at temperatures range 450-700°C complimented by excellent oxidation and corrosion resistance and its outstanding weldability in either the age hardened or annealed condition. Though alloy 718 is reputed to possess good weldability in the context of their resistance to post weld heat treatment cracking, heat affected zone (HAZ) and weld metal cracking problems persist. This paper presents a brief review on welding processes for Inconel 718 and the weld defects, such as strain cracking during post weld heat treatment, solidification cracking, and liquation cracking. The effect of alloy chemistry, primary and secondary processing on the HAZ cracking susceptibility, influence of post/pre weld heat treatments on precipitation, segregation reactions, and effect of grain size etc. discussed and concluded with future scope for research.

  18. State-of-the-art review of brine migration studies in salt. Technical memorandum report RSI-0075

    International Nuclear Information System (INIS)

    Gnirk, P.F.; Krause, W.B.; Fossum, A.F.

    1981-09-01

    This report provides a state-of-the-art review of brine migration studies in rock salt. Emphasis is placed on the review of literature relating to brine migration phenomena around nuclear waste canisters. This review includes experimental work which has been conducted in the laboratory and in the field. In addition to the literature review, some additional thoughts on brine migration are given and a series of laboratory experiments is proposed. The proposed laboratory experiments are designed to determine whether or not a relationship exists between brine migration and temperature, temperature gradient and stress in rock salt. 34 references, 9 figures, 3 tables

  19. Workshop material for state review of USNRC site suitability criteria for high-level radioactive waste repositories

    International Nuclear Information System (INIS)

    1977-08-01

    The Nuclear Regulatory Commission (NRC) is developing criteria on which to judge whether a proposed site for a geologic repository is suitable for disposal of high-level nuclear wastes. To aid in its analysis and assessment, NRC is planning three early independent reviews of the site suitability criteria development effort: a peer review by experts outside of NRC; a review by the National Academy of Sciences; and a review by State officials. This document has been prepared to aid workshop participants in understanding the Preliminary Site Suitability Criteria and to prepare them to contribute to an evaluation of those criteria

  20. Natural language processing systems for capturing and standardizing unstructured clinical information: A systematic review.

    Science.gov (United States)

    Kreimeyer, Kory; Foster, Matthew; Pandey, Abhishek; Arya, Nina; Halford, Gwendolyn; Jones, Sandra F; Forshee, Richard; Walderhaug, Mark; Botsis, Taxiarchis

    2017-09-01

    We followed a systematic approach based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses to identify existing clinical natural language processing (NLP) systems that generate structured information from unstructured free text. Seven literature databases were searched with a query combining the concepts of natural language processing and structured data capture. Two reviewers screened all records for relevance during two screening phases, and information about clinical NLP systems was collected from the final set of papers. A total of 7149 records (after removing duplicates) were retrieved and screened, and 86 were determined to fit the review criteria. These papers contained information about 71 different clinical NLP systems, which were then analyzed. The NLP systems address a wide variety of important clinical and research tasks. Certain tasks are well addressed by the existing systems, while others remain as open challenges that only a small number of systems attempt, such as extraction of temporal information or normalization of concepts to standard terminologies. This review has identified many NLP systems capable of processing clinical free text and generating structured output, and the information collected and evaluated here will be important for prioritizing development of new approaches for clinical NLP. Copyright © 2017 Elsevier Inc. All rights reserved.