WorldWideScience

Sample records for state of the art

  1. State of the art

    International Nuclear Information System (INIS)

    Lederman, L.M.

    1983-01-01

    There is a large body of experience in high luminosity data taking in fixed target research. We try to consider a wide variety of high rate experiments which were limited by the detector (not by available beam) to a preset number of collisions per second. We then attempt to translate these state-of-the-art experiments to effective collider experiments. To this end, we extend the chosen detector to a comparison 4π collider detector operating near 1 TeV. There are several issues: (1) effective solid angle must be translated to approx. = 4π, (2) environments may be quite different, e.g., beam dump near fixed target or beam halo muons vs. collider backgrounds, (3) the multiplicity varies over the experiments selected and (4) we have to treat open vs closed geometries. The large variety of experiments selected is designed to average over the causes for detector limitation. Finally we chose detectors which have produced physics in order to gauge the state of the art

  2. State-of-the-art

    DEFF Research Database (Denmark)

    Pecher, Arthur; Kofoed, Jens Peter

    This report presents a short overview on the state-of-the-art of wave tank testing of wave energy converters (WEC). Here for, it focuses mainly on the Phase 1 and 2 development phases of wave energy converters, as these are done in the wave tank (WEC), while the other development phases are perfo......This report presents a short overview on the state-of-the-art of wave tank testing of wave energy converters (WEC). Here for, it focuses mainly on the Phase 1 and 2 development phases of wave energy converters, as these are done in the wave tank (WEC), while the other development phases...

  3. State of the art

    DEFF Research Database (Denmark)

    Bourantas, Christos V; Tenekecioglu, Erhan; Radu, Maria

    2017-01-01

    It has been 40 years since percutaneous coronary intervention (PCI) was introduced into the clinical setting. Over these years significant advances in device technology and the invention of new therapeutic strategies have broadened its applications in the clinical arena, rendering this treatment ...

  4. State of the States, 2012: Arts Education State Policy Summary

    Science.gov (United States)

    Arts Education Partnership (NJ1), 2012

    2012-01-01

    The "State of the States 2012" summarizes state policies for arts education identified in statute or code for all 50 states and the District of Columbia. Information is based primarily on results from the AEP Arts Education State Policy Survey conducted in 2010-11, and updated in April 2012.

  5. Chernobyl - state of the art

    International Nuclear Information System (INIS)

    Souza, Daiane C.B. de; Vicente, Roberto; Rostelato, Maria Elisa C.M.; Borges, Jessica F.; Tiezzi, Rodrigo; Peleias Junior, Fernando S.; Souza, Carla D.; Rodrigues, Bruna T.; Benega, Marcos A.G.; Souza, Anderson S. de; Silva, Thais H. da

    2014-01-01

    This article aims to analyze what has been done so far in relation to damage caused by the accident and the state of art in Chernobyl, as well as the impact on radiation protection applied safety nuclear power plants. In the first part of the work a data survey was done through a bibliographic review and the in the second part data was collected during a visit, in June 2013 at the crash site, when was observed dose values in the affected areas and the works of repairs that have been made in the sarcophagus and surroundings as well as in official reports available through active international bodies. The main results indicate significant improvements in radiation protection systems

  6. State of the States 2016: Arts Education State Policy Summary

    Science.gov (United States)

    Aragon, Stephanie

    2016-01-01

    The "State of the States 2016" summarizes state policies for arts education identified in statute or administrative code for all 50 states and the District of Columbia. Information is based on a comprehensive search of state education statute and codes on each state's relevant websites. Complete results from this review are available in…

  7. Fuel cells: state of the art

    International Nuclear Information System (INIS)

    Campanari, S.; Casalegno, A.

    2007-01-01

    This paper deals with the main features at present state-of-the-art fuel cell and hybrid cycle technologies, discussing their actual performance, possible applications, market entry perspectives and potential development [it

  8. The Art of the Renaissance Capitalist State

    Directory of Open Access Journals (Sweden)

    Rebeka Vidrih

    2007-12-01

    This article also highlights the fact that the concept of art developed in Florence – a city-state that played an important role in the early-capitalist world of the Renaissance, but never assumed a leading role like Venice and Genoa. »Art« was thus created through Florence’s efforts to demonstrate its equality and importance and, although it failed to achieve this in the field of the (capitalist economy, it at least succeeded in the field of the (absolutist state that was subordinate to this economy.

  9. The state-of-the-art of ART restorations.

    Science.gov (United States)

    Frencken, Jo E

    2014-04-01

    ART is less anxiety- and pain-provoking than traditional restorative treatments; administration of local anaesthesia is rarely required. Systematic reviews have provided evidence of the high level of effectiveness of high-viscosity glass-ionomer ART restoration in restoring single-surface cavities, both in primary and permanent posterior teeth, but its survival rates in restoring multiple-surface cavities in primary posterior teeth needs to be improved. Insufficient information is available regarding the survival rates of multiple-surface ART restorations in permanent teeth. Evidence from these reviews indicates no difference in the survival rates of single-surface high-viscosity glass-ionomer ART restorations and amalgam restorations in primary and permanent posterior teeth. Where indicated, high-viscosity glass-ionomer ART restorations can be used alongside traditional restorations. ART provides a much more acceptable introduction to dental restorative care than the traditional 'injection, drill and fill'.

  10. Multimodal Dialogue Management - State of the art

    NARCIS (Netherlands)

    Bui Huu Trung, B.H.T.

    This report is about the state of the art in dialogue management. We first introduce an overview of a multimodal dialogue system and its components. Second, four main approaches to dialogue management are described (finite-state and frame-based, information-state based and probabilistic, plan-based,

  11. Platelet kinetics: the state of the art

    International Nuclear Information System (INIS)

    Heyns, A. duP

    1984-01-01

    In this paper an overview of the state of the art of platelet kinetics 1982 is presented. The subjects considered include a discussion of the advantages and disadvantages of some of the many radionuclide platelet labels, viz 51 Cr, 111 In, focussing briefly on models for analysis of platelets survival. (Auth.)

  12. The state-of-the-art of ART sealants.

    Science.gov (United States)

    Frencken, Jo E

    2014-03-01

    Sealing caries-prone pits and fissure systems is an effective caries-preventive measure. There are basically two types of sealant materials: glass-ionomer and resin-based materials. Low- and medium-viscosity glass-ionomers were initially used and showed a low level of retention. With the advent of the ART approach in the mid-nineties, high-viscosity glass-ionomers were introduced as sealant material and the retention rate of ART sealants increased substantially. As the effectiveness of a sealant is measured by its capacity to prevent (dentine) carious lesion development, sealant retention is considered a surrogate endpoint. The ART sealant protocol is described. Systematic reviews and meta-analysis covering low- medium- and high-viscosity glass-ionomer (ART) sealants have concluded that there is no evidence that either glass-ionomer or resin-based sealants prevent dentine carious lesions better. The annual dentine carious lesion development in teeth with high-viscosity glass-ionomer ART sealants over the first three years is 1%. These ART sealants have a high capacity of preventing carious lesion development. Because no electricity and running water is required, ART sealants can be placed both inside and outside the dental surgery. High-viscosity glass-ionomer ART sealants can be used alongside resin-based sealants.41:119-124

  13. The "State of Art" of Organisational Blogging

    Science.gov (United States)

    Baxter, Gavin J.; Connolly, Thomas M.

    2013-01-01

    Purpose: The aim of this paper is to provide an overview of the "state of art" of organisational blogging. It also aims to provide a critical review of the literature on organisational blogging and propose recommendations on how to advance the subject area in terms of academic research. Design/methodology/approach: A systematic literature review…

  14. State of the art in microfabrication

    NARCIS (Netherlands)

    Schmitz, Jurriaan

    2014-01-01

    In this review paper the state of the art in microfabrication is presented. The focus is on trends in integrated circuit fabrication by mainstream industrial players. The article starts with Moore’s Law, describing its inception as well as the evolution of Moore’s metric of the number of components

  15. State-of-the-art inventory

    NARCIS (Netherlands)

    Verhagen, H.J.; Van Gerven, K.A.J.; Akkerman, G.J.

    2005-01-01

    The present report provides a state-of-the-art inventory of relevant information and technical concepts for the ComCoast project, being the first phase of the research stages of Work Package 3 (WP3). This project was assigned to Royal Haskoning by CUR. The information scan was set-up in a systematic

  16. Endophthalmitis: state of the art

    Directory of Open Access Journals (Sweden)

    Vaziri K

    2015-01-01

    Full Text Available Kamyar Vaziri, Stephen G Schwartz, Krishna Kishor, Harry W Flynn Jr Department of Ophthalmology, Bascom Palmer Eye Institute, University of Miami Miller School of Medicine, Miami, FL, USA Abstract: Endophthalmitis is an uncommon diagnosis but can have devastating visual outcomes. Endophthalmitis may be endogenous or exogenous. Exogenous endophthalmitis is caused by introduction of pathogens through mechanisms such as ocular surgery, open-globe trauma, and intravitreal injections. Endogenous endophthalmitis occurs as a result of hematogenous spread of bacteria or fungi into the eye. These categories of endophthalmitis have different risk factors and causative pathogens, and thus require different diagnostic, prevention, and treatment strategies. Novel diagnostic techniques such as real-time polymerase chain reaction (RT-PCR have been reported to provide improved diagnostic results over traditional culture techniques and may have a more expanded role in the future. While the role of povidone-iodine in prophylaxis of postoperative endophthalmitis is established, there remains controversy with regard to the effectiveness of other measures, including prophylactic antibiotics. The Endophthalmitis Vitrectomy Study (EVS has provided us with valuable treatment guidelines. However, these guidelines cannot be directly applied to all categories of endophthalmitis, highlighting the need for continued research into attaining improved treatment outcomes. Keywords: endophthalmitis, exogenous, endogenous, postoperative, intravitreal injection

  17. Meniscal Allograft Transplantation: State of the Art.

    Science.gov (United States)

    Trentacosta, Natasha; Graham, William C; Gersoff, Wayne K

    2016-06-01

    Meniscal allograft transplantation has evolved over the years to provide a state-of-the-art technique for the sports medicine surgeon to utilize in preserving contact mechanics and function of the knee in irreparable meniscal pathology. However, this procedure continues to spark considerable debate on proper tissue processing techniques, acceptable indications, methods of implantation, and potential long-term outcomes.

  18. State of the art in semiconductor detectors

    International Nuclear Information System (INIS)

    Rehak, P.; Gatti, E.

    1990-01-01

    The state of the art in semiconductor detectors for elementary particle physics and X-ray astronomy is briefly reviewed. Semiconductor detectors are divided into two groups; i) classical semiconductor diode detectors and ii) semiconductor memory detectors. Principles of signal formation for both groups of detectors are described and their performance is compared. New developments of silicon detectors are reported here. (orig.)

  19. State of the art in semiconductor detectors

    International Nuclear Information System (INIS)

    Rehak, P.; Gatti, E.

    1989-01-01

    The state of the art in semiconductor detectors for elementary particle physics and x-ray astronomy is briefly reviewed. Semiconductor detectors are divided into two groups; classical semiconductor diode detectors; and semiconductor memory detectors. Principles of signal formation for both groups of detectors are described and their performance is compared. New developments of silicon detectors are reported here. 13 refs., 8 figs

  20. State of the Art: Personalization

    DEFF Research Database (Denmark)

    Durao, Frederico Araujo; Dolog, Peter; Jahn, Karsten

    This is report surveys KIWI related work in the personalization domain. It discusses various approaches from adaptive hypermedia, user modelling, and semantic web which deal with personalization. It gives some suggestions on potential personalization strategies which can exploit knowledge...

  1. State of the social responsibility art

    OpenAIRE

    Varela López, Leidy Viviana; Universidad de San Buenaventura Cali.

    2015-01-01

    From the eighties, it has been addressing the issue of corporate social responsibility, specifically toward the defense of human rights and climate change. However, although they have applied corporate social responsibility principles in some of the existing institutions, it is still very small the work being done around the specific activity of solid waste management. Some works have been compiled to build a state of the art for understanding in depth the concept of corporate social responsi...

  2. A State of the Art Overview

    DEFF Research Database (Denmark)

    Jahangiri, Tohid; Bak, Claus Leth; Silva, Filipe Miguel Faria da

    2015-01-01

    The first EHV composite cross-arms have been used since late 1990's in Switzerland. It was the first step to the compaction of towers sizes. Since then, significant advances have been made in composite cross-arms technology while the lattice construction technique has not been seriously challenged...... of EHV composite cross-arms and lightning protection methods are reviewed based on the state of the art review and subsequently some solutions are presented to overcome the two main challenges....

  3. Chernobyl - state of the art; Chernobyl - o estado da arte

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Daiane C.B. de; Vicente, Roberto; Rostelato, Maria Elisa C.M.; Borges, Jessica F.; Tiezzi, Rodrigo; Peleias Junior, Fernando S.; Souza, Carla D.; Rodrigues, Bruna T.; Benega, Marcos A.G.; Souza, Anderson S. de; Silva, Thais H. da, E-mail: dcsouza@ipen.br, E-mail: rvicente@ipen.br, E-mail: elisaros@ipen.br, E-mail: rtiezzi@ipen.br, E-mail: carladdsouza@yahoo.com.br, E-mail: marcosagbenega@ipen.br, E-mail: bteigarodrigues@gmail.com, E-mail: thaishunk@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2014-07-01

    This article aims to analyze what has been done so far in relation to damage caused by the accident and the state of art in Chernobyl, as well as the impact on radiation protection applied safety nuclear power plants. In the first part of the work a data survey was done through a bibliographic review and the in the second part data was collected during a visit, in June 2013 at the crash site, when was observed dose values in the affected areas and the works of repairs that have been made in the sarcophagus and surroundings as well as in official reports available through active international bodies. The main results indicate significant improvements in radiation protection systems.

  4. Where is your state of the art?

    Science.gov (United States)

    Ríos Gaona, Manuel

    2015-04-01

    Beyond the purposes of publishing, questioning and/or hypothesizing, every research has the noble aim to quench the constant human need of pushing farther away the boundaries of knowledge, may such frontier exist. The state of the art is the generic expression coined to limit the whereabouts of any particular knowledge. We use it just like a compass, it tells us how far we are, what has been done and where we should go. Take for instance quantum field theory, the state of the art in particle physics will tell you that everything that exists in this universe is made of bosons, quarks and leptons. What!?. Hold on, I was taught (and luckily maybe you weren't) that the fundamental particles were electrons, neutrons and protons, right?. Indeed, that is the state of the art but from almost one century ago. So, if I may ask... where is your state of the art? This is not about quantum physics; it is not even about hydrology; it is about everything. Today, everybody doing or not a PhD fiercely believes that their research is important, extremely unique, life changing (and help us God if we are wrong); but how can you be so sure that what you do, isn't already done?. We live in a modern world, cool environmental scientists now have tagged this era as the Anthropocene; globalization is everywhere and of course knowledge has not escaped to it. Not only knowledge is now global but is totally diversified, any crazy idea you can think of (or actually you can't) it is very likely that somebody already has his/hers hands on it. Nevertheless, this is a good thing, isn't it?. Well, that is the whole point. Every time I should write my research's state of the art, I always get overwhelmed because it actually is pretty difficult to establish, and later when I think I get it, it seems that I am solving issues that somebody already bothered to solve 30 years ago. Therefore, does it really have some purpose to be swimming in a huge pool of knowledge, not knowing where exactly I am? or

  5. State of the art in cosmology

    International Nuclear Information System (INIS)

    Zel'dovich, Ya.B.

    1983-01-01

    The present state of the art in cosmology is under discussion. The general picture of the Universe evolution is presented, and its main stages are outlined. The prooess of formation of the large scale Universe structure is considered. The possibility of investigation into the ''inflation'' period of the ''very-very early Universe'' from the view point of theoretical physics is sown. It is noted that cosmology will become a complete science only when physics gives an exhaustive answer to all issues raised by cosmology

  6. Analyst workbenches state of the art report

    CERN Document Server

    Rock-Evans, R

    1987-01-01

    Analyst Workbenches examines various aspects of analyst workbenches and the tasks and data that they should support. The major advances and state of the art in analyst workbenches are discussed. A comprehensive list of the available analyst workbenches, both the experimental and the commercial products, is provided. Comprised of three parts, this book begins by describing International Computers Ltd's approach to automating analysis and design. It then explains what business analysis really means, outlines the principal features of analyst workbenches, and considers the ways in which they can

  7. Digital astrophotography the state of the art

    CERN Document Server

    Ratledge, David

    2005-01-01

    The CCD (Charge-Coupled Device) has revolutionised optical astronomy during the past 20 years, and specialised astronomical CCD cameras are now even more affordable, colour is standard, and they provide spectacular results. "Digital Astrophotography: The State of the Art", provides some examples of the best images, and gives readers hints and tips about how to get the best out of this extraordinary technology. Experts in CCD astronomy from North America and Europe have contributed to this book, illustrating their help and advice with many beautiful colour images - the book is in full colour throughout. Techniques range from using simple webcams to highly technical aspects such as supernovae patrolling. Computer processing, stacking and image-enhancement are detailed, along with many hints and tips from the experts.

  8. Digital Breast Tomosynthesis: State of the Art

    Science.gov (United States)

    Vedantham, Srinivasan; Vijayaraghavan, Gopal R.; Kopans, Daniel B.

    2015-01-01

    This topical review on digital breast tomosynthesis (DBT) is provided with the intent of describing the state of the art in terms of technology, results from recent clinical studies, advanced applications, and ongoing efforts to develop multimodality imaging systems that include DBT. Particular emphasis is placed on clinical studies. The observations of increase in cancer detection rates, particularly for invasive cancers, and the reduction in false-positive rates with DBT in prospective trials indicate its benefit for breast cancer screening. Retrospective multireader multicase studies show either noninferiority or superiority of DBT compared with mammography. Methods to curtail radiation dose are of importance. © RSNA, 2015 PMID:26599926

  9. State of the art magnetic resonance imaging

    International Nuclear Information System (INIS)

    Weissman, J.D.

    1987-01-01

    In less than a decade Magnetic Resonance Imaging (MRI) has evolved from a laboratory demonstration to a safe and effective technique for clinical diagnosis. This evolutionary process continues. At this time 2-D and 3-D imaging of the head and body is firmly established in clinical use. Surface coil imaging, two-component chemical shift imaging, in-vivo spectroscopy and flow imaging are currently in various stages of development. The present state of the art of MRI is a function of an array of technologies: magnet, Rf coil, Rf pulse amplifier, gradient coil and driver, pulse programmer, A/D converter, computer system architecture, array processors and mass storage (both magnetic and optical). The overall product design is the result of a complex process which balances the advantages and disadvantages of each component for optimal system performance and flexibility. The author discusses the organization of a state-of-the-art MRI system. Several examples of the kinds of system interactions affecting design choices are given. (Auth.)

  10. State of the art on bioethanol production

    International Nuclear Information System (INIS)

    Barisano, D.; De Bari, I.; Viola, E.; Zimbardi, F.; Braccio, G.; Cantarella, M.; Gallifuoco, A.

    2001-01-01

    The state of the art, deals with the ethanol production from current processes based on the use of sugar and starch as feedstock and those under development based on lignocellulosic biomass. In the first section are reported the commercially available processes together with hints to the newest technologies. As regard the ethanol production from lignocellulosics, it has been collected data on the biomass availability in Europe as energy crops, industrial crops, agricultural residues and domestic waste. It is provided a bibliographic study on the technologies and processes under development worldwide for the conversion of lignocellulosics into ethanol. Finally, a brief discussion on the economics highlights the near term viability of producing ethanol by this way [it

  11. Mechanical Ventilation: State of the Art.

    Science.gov (United States)

    Pham, Tài; Brochard, Laurent J; Slutsky, Arthur S

    2017-09-01

    Mechanical ventilation is the most used short-term life support technique worldwide and is applied daily for a diverse spectrum of indications, from scheduled surgical procedures to acute organ failure. This state-of-the-art review provides an update on the basic physiology of respiratory mechanics, the working principles, and the main ventilatory settings, as well as the potential complications of mechanical ventilation. Specific ventilatory approaches in particular situations such as acute respiratory distress syndrome and chronic obstructive pulmonary disease are detailed along with protective ventilation in patients with normal lungs. We also highlight recent data on patient-ventilator dyssynchrony, humidified high-flow oxygen through nasal cannula, extracorporeal life support, and the weaning phase. Finally, we discuss the future of mechanical ventilation, addressing avenues for improvement. Copyright © 2017 Mayo Foundation for Medical Education and Research. Published by Elsevier Inc. All rights reserved.

  12. Nuclear Liability, State of the Art

    International Nuclear Information System (INIS)

    Reitsma, S. M. S.

    2010-01-01

    Over fifty years ago states started to introduce legislation protecting the public against the potential magnitude and peculiarity of risks arising from the nuclear energy production. They did so trough a specific liability and compensation regime. Whether legislation was based on national initiatives or, as more frequently, related to international nuclear liability conventions, it was based on a number of principles being applied universally. Furthermore, it at the same time strived for not preventing the development of the nuclear industry because of an unbearable liability. This paper aims at explaining the broad outline of the above legislation, its development since its early years, the state of the art as regards its modernisation as well as the (alleged) problems underlying the delay in its introduction in a number of countries. When dealing with those problems it will be inevitable to touch upon a number of insurance related matters, which, as an insurer I am happy to tell, will lead me to familiar territory.(author).

  13. State of the Art in the Cramer Classification Scheme and ...

    Science.gov (United States)

    Slide presentation at the SOT FDA Colloquium on State of the Art in the Cramer Classification Scheme and Threshold of Toxicological Concern in College Park, MD. Slide presentation at the SOT FDA Colloquium on State of the Art in the Cramer Classification Scheme and Threshold of Toxicological Concern in College Park, MD.

  14. Entrepreneurship Education: State of the Art

    Directory of Open Access Journals (Sweden)

    José Carlos Sánchez García

    2017-10-01

    Full Text Available Job uncertainty and ambiguity is a reality in many current societies, therefore, the idea of self-employment has taken a more active role, not only out of necessity, but also because it brings innovation and development to societies. In view of this situation, the following question arises: how can we strengthen the entrepreneurial spirit of our students? This article has the objective to collect theoretical information of the state of the art on entrepreneurship education: what it has been, what it is, and what can it be, in order to present the current condition of the topic, both in the psychological and pedagogical field. To achieve this objective, information from 108 research sources, mainly from scientific articles and books was collected, concluding that, although generally, entrepreneurship education has significantly contributed to the creation of businesses, developing countries, specifically, those in Latin America, still require extra effort to fully implement entrepreneurship topic in the curriculums, particularly because of challenges such as political instability, technology and international competition.

  15. Imaging Acute Appendicitis: State of the Art

    Directory of Open Access Journals (Sweden)

    Diana Gaitini

    2011-01-01

    Full Text Available The goal of this review is to present the state of the art in imaging tests for the diagnosis of acute appendicitis. Relevant publications regarding performance and advantages/disadvantages of imaging modalities for the diagnosis of appendicitis in different clinical situations were reviewed. Articles were extracted from a computerized database (MEDLINE with the following activated limits: Humans, English, core clinical journals, and published in the last five years. Reference lists of relevant studies were checked manually to identify additional, related articles. Ultrasound (US examination should be the first imaging test performed, particularly among the pediatric and young adult populations, who represent the main targets for appendicitis, as well as in pregnant patients. A positive US examination for appendicitis or an alternative diagnosis of possible gastrointestinal or urological origin, or a negative US, either showing a normal appendix or presenting low clinical suspicion of appendicitis, should lead to a final diagnosis. A negative or indeterminate examination with a strong clinical suspicion of appendicitis should be followed by a computed tomography (CT scan or alternatively, a magnetic resonanace imaging (MRI scan in a pregnant patient. A second US examination in a patient with persistent symptoms, especially if the first one was performed by a less experienced imaging professional, is a valid alternative to a CT.

  16. Greenhouse mechanization: State of the art and future perspective

    NARCIS (Netherlands)

    Henten, van E.

    2006-01-01

    This paper reviews the state of the art and future perspective of greenhouse mechanization. Driving forces for mechanization are identified. Dutch greenhouse crop production is used as an example. Analysis of a generic crop production process combined with a review of the state of the art in

  17. State of the art of solid state dosimetry

    International Nuclear Information System (INIS)

    Souza, Susana O.; Yamamoto, Takayoshi; D'Errico, Francesco

    2014-01-01

    Passive solid-state detectors still dominate the personal dosimetry field. This article provides state of the art in this field and summarizes the most recent works presented on TL, OSL and RPL during the 17th International Conference on Solid State Dosimetry held in Recife in September 2013. The Article contains in particular the techniques Thermoluminescence (TL), Optically Stimulated Luminescence (OSL), radio photoluminescence (RPL). Thermoluminescence has the biggest advantage of the wide availability of commercial materials for dosimetry, and the nature tissue-equivalent of several of these materials. The limitation of the TL dosimetry presents fading luminance signal and the need for high temperatures to obtain the signal. The Optically Stimulated Luminescence has the advantages of high sensitivity, the possibility of multiple reading, while its limit is the need to use response compensating filters in addition to the high cost of equipment and dosimeters still restricted very few options trading . The radio photoluminescence has a reading that is completely non-destructive, but their dosimeters present lack of tissue-equivalent and a high cost. Presents the details of the techniques and the advantages and limitations of each of these will be discussed

  18. FIPRED state of art

    International Nuclear Information System (INIS)

    Ohai, D.; Meleg, T.; Dumitrescu, I.; Benga, D.

    2009-01-01

    Full text: The paper presents the FIPRED (Fission Product Release from Debris Bed) Project state of art (UO 2 sintered pellets oxidation). The FIPRED Project is dedicated to the study of the fission products released from irradiated pellets present in debris bed. The fission product release is produced by oxidative self disintegration of sintered pellets at air ingress and it depends on temperature. The experimental program covered experiments of 300-1400 deg. C in air diluted with nitrogen at different concentrations of oxygen and different steam-air mixture. The experiments were performed using the SETARAM thermo-gravimetric equipment and the FIPRED EQ equipment designed and manufactured especially for this type of experiment. The powders (fragments), resulted from UO 2 pellets self disintegration, were characterized by sieving and SEM. The self disintegration mechanism was demonstrated using the experimental result obtained and thermodynamically data of uranium oxides. (authors)

  19. Conformation Generation: The State of the Art.

    Science.gov (United States)

    Hawkins, Paul C D

    2017-08-28

    The generation of conformations for small molecules is a problem of continuing interest in cheminformatics and computational drug discovery. This review will present an overview of methods used to sample conformational space, focusing on those methods designed for organic molecules commonly of interest in drug discovery. Different approaches to both the sampling of conformational space and the scoring of conformational stability will be compared and contrasted, with an emphasis on those methods suitable for conformer sampling of large numbers of drug-like molecules. Particular attention will be devoted to the appropriate utilization of information from experimental solid-state structures in validating and evaluating the performance of these tools. The review will conclude with some areas worthy of further investigation.

  20. The State of Comic Art Bibliography in North America

    Directory of Open Access Journals (Sweden)

    Michael Rhode

    2010-08-01

    Full Text Available Within the past two decades, several American bibliographies of comic art have been published to aid in research on comics and cartooning. Professor John Lent’s ten-volume Comic Art Bibliographies is one of the largest such projects and he began it with a self-published volume in 1986. Librarian Randy Scott published The Comic Art Collection Catalog: An Author, Artist, Title and Subject Catalog Of The Comic Art Collection, Special Collections Division, Michigan State University Libraries, whi...

  1. Text Generation: The State of the Art and the Literature.

    Science.gov (United States)

    Mann, William C.; And Others

    This report comprises two documents which describe the state of the art of computer generation of natural language text. Both were prepared by a panel of individuals who are active in research on text generation. The first document assesses the techniques now available for use in systems design, covering all of the technical methods by which…

  2. State of the art of solid state dosimetry; Estado da arte em dosimetria do estado solido

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Susana O., E-mail: sosouza@ufs.br [Universidade Federal de Sergipe (UFS), Sao Cristovao, SE (Brazil); Yamamoto, Takayoshi [Radioisotope Research Center, Osaka University (Japan); D' Errico, Francesco, E-mail: francesco.derrico@yale.edu [Yale University, School of Medicine, CT (United States)

    2014-07-01

    Passive solid-state detectors still dominate the personal dosimetry field. This article provides state of the art in this field and summarizes the most recent works presented on TL, OSL and RPL during the 17th International Conference on Solid State Dosimetry held in Recife in September 2013. The Article contains in particular the techniques Thermoluminescence (TL), Optically Stimulated Luminescence (OSL), radio photoluminescence (RPL). Thermoluminescence has the biggest advantage of the wide availability of commercial materials for dosimetry, and the nature tissue-equivalent of several of these materials. The limitation of the TL dosimetry presents fading luminance signal and the need for high temperatures to obtain the signal. The Optically Stimulated Luminescence has the advantages of high sensitivity, the possibility of multiple reading, while its limit is the need to use response compensating filters in addition to the high cost of equipment and dosimeters still restricted very few options trading . The radio photoluminescence has a reading that is completely non-destructive, but their dosimeters present lack of tissue-equivalent and a high cost. Presents the details of the techniques and the advantages and limitations of each of these will be discussed.

  3. The state-of-the-art of HSR in Europe.

    NARCIS (Netherlands)

    Hansen, J.

    2009-01-01

    In this section of the workshop we present an overview based on mapping the current state-of-the-art concerning various fields of health services research, addressing the different levels of analysis in HSR. (1) HSR at the level of health care systems, being national or sometimes regional entities,

  4. Bottomland hardwood afforestation: State of the art

    Science.gov (United States)

    Emile S. Gardiner; D. Ramsey Russell; Mark Oliver; Lamar C. Dorris

    2000-01-01

    Over the past decade, land managers have implemented large-scale afforestation operations across the Southern United States to rehabilitate agricultural land historically converted from bottomland hardwood forest cover types. These afforestation efforts were initially concentrated on public land managed by State or Federal Government agencies, but have later shifted...

  5. Singularities: the state of the art

    International Nuclear Information System (INIS)

    Clarke, C.J.S.; Schmidt, B.G.

    1977-01-01

    A brief, but precise and unified account is given of the results that have been rigorously established at the time of writing concerning the existence and nature of singularities in classical relativity. (author)

  6. Flexible AC transmission systems: the state of the art

    Energy Technology Data Exchange (ETDEWEB)

    Edris, Abdel-Aty [Electric Power Research Inst., Palo Alto, CA (United States). Electric Systems Division

    1994-12-31

    Flexible AC transmission systems (FACTS) is a concept promoting the use of power electronic controllers to enhance the controllability and usable capacity of AC transmission. This paper presents the state of the art of FACTS and the status of the current projects for the application of the FACTS controllers in transmission systems. (author) 8 refs., 8 figs.

  7. Electrocardiogram transmission - The state of the art.

    Science.gov (United States)

    Firstenberg, A.; Huston, S. W.; Olsen, D. E.; Hahn, P. M.

    1971-01-01

    A comparative analysis of available clinical EKG telemetry systems was conducted. Although present day electrocardiogram diagnosis requires a high degree of measurement accuracy, there exists wide variations in the performance characteristics of the various telemeters marketed today necessitating careful consideration of specifications prior to procurement. The authors have endeavored to provide the physicians with a clear understanding, in terms of the effects on the electrocardiogram, of the factors he must evaluate in order to ensure high fidelity EKG reproduction. A tabulation of comparative parameter values for each unit obtained from manufacturers' specifications and substantiated by standardized performance tests conducted in our laboratory is presented.

  8. The state of the contraceptive art.

    Science.gov (United States)

    Tyrer, L B; Duarte, J

    1983-01-01

    The high failure rates of available contraceptive methods attest to the fact that the present technology is inadequate to meet the needs of many women, and new, safer, and highly effective contraceptive methods must be developed for both the female and the male. Previously, industry was largely responsible for the research and development of many of the currently available contraceptives, but at this time it is less than enthusiastic about carrying out further research because of the time and cost associated with the approval of new drugs. Additionally, because of the medico legal climate that exists today, particularly concerning present contraceptive drugs and devices, pharmaceutical companies are concentrating on developing drugs for the treatent of disease conditions, a less risky area. The US federal government, which currently is the single largest funder in the world of contraceptive and related research, is directing little attention to this particular area. The most obvious obstacles to enhanced federal support is the debate over the federal budget priorities. Other deterring factors include the controversy over abortion which has discouraged efforts to call attention to contraceptive research because of concern that it might result in funding cuts instead of increases. Another factor is the traditional allocation of 40% of National Institute of Health funds to population research and 60% to maternal and child health. An overview of currently available contraceptive methods covers oral contraception (OC), long lasting injectable contraception, IUDs, the condom, vaginal contraceptive sponge, the diagphragm, and fertility awareness techniques. Determining the actual benefits versus the risks of OC has proved difficult. OC has changed considerably since it came into use. The most serious side effects attributed to the OCs involve the cardiovascular system, specifically thromboembolism, stroke, and heart attack. The risk of developing these diseases has

  9. Reinforcement Learning State-of-the-Art

    CERN Document Server

    Wiering, Marco

    2012-01-01

    Reinforcement learning encompasses both a science of adaptive behavior of rational beings in uncertain environments and a computational methodology for finding optimal behaviors for challenging problems in control, optimization and adaptive behavior of intelligent agents. As a field, reinforcement learning has progressed tremendously in the past decade. The main goal of this book is to present an up-to-date series of survey articles on the main contemporary sub-fields of reinforcement learning. This includes surveys on partially observable environments, hierarchical task decompositions, relational knowledge representation and predictive state representations. Furthermore, topics such as transfer, evolutionary methods and continuous spaces in reinforcement learning are surveyed. In addition, several chapters review reinforcement learning methods in robotics, in games, and in computational neuroscience. In total seventeen different subfields are presented by mostly young experts in those areas, and together the...

  10. The state of the art in biomimetics.

    Science.gov (United States)

    Lepora, Nathan F; Verschure, Paul; Prescott, Tony J

    2013-03-01

    Biomimetics is a research field that is achieving particular prominence through an explosion of new discoveries in biology and engineering. The field concerns novel technologies developed through the transfer of function from biological systems. To analyze the impact of this field within engineering and related sciences, we compiled an extensive database of publications for study with network-based information analysis techniques. Criteria included publications by year and journal or conference, and subject areas judged by popular and common terms in titles. Our results reveal that this research area has expanded rapidly from less than 100 papers per year in the 1990s to several thousand papers per year in the first decade of this century. Moreover, this research is having impact across a variety of research themes, spanning robotics, computer science and bioengineering. In consequence, biomimetics is becoming a leading paradigm for the development of new technologies that will potentially lead to significant scientific, societal and economic impact in the near future.

  11. Advertising Research: The State of the Art.

    Science.gov (United States)

    Ramond, Charles

    This book summarizes and appraises current knowledge and practice in the field of advertising research. The material is presented under the following chapter headings: aim and scope, how advertising communicates, how advertising sells, theme research, selecting target audiences, copy research, studies of advertising frequency, media research,…

  12. Handheld spectrometers: the state of the art

    Science.gov (United States)

    Crocombe, Richard A.

    2013-05-01

    "Small" spectrometers fall into three broad classes: small versions of laboratory instruments, providing data, subsequently processed on a PC; dedicated analyzers, providing actionable information to an individual operator; and process analyzers, providing quantitative or semi-quantitative information to a process controller. The emphasis of this paper is on handheld dedicated analyzers. Many spectrometers have historically been large, possible fragile, expensive and complicated to use. The challenge over the last dozen years, as instruments have moved into the field, has been to make spectrometers smaller, affordable, rugged, easy-to-use, but most of all capable of delivering actionable results. Actionable results can dramatically improve the efficiency of a testing process and transform the way business is done. There are several keys to this handheld spectrometer revolution. Consumer electronics has given us powerful mobile platforms, compact batteries, clearly visible displays, new user interfaces, etc., while telecomm has revolutionized miniature optics, sources and detectors. While these technologies enable miniature spectrometers themselves, actionable information has demanded the development of rugged algorithms for material confirmation, unknown identification, mixture analysis and detection of suspicious materials in unknown matrices. These algorithms are far more sophisticated than the `correlation' or `dot-product' methods commonly used in benchtop instruments. Finally, continuing consumer electronics advances now enable many more technologies to be incorporated into handheld spectrometers, including Bluetooth, wireless, WiFi, GPS, cameras and bar code readers, and the continued size shrinkage of spectrometer `engines' leads to the prospect of dual technology or `hyphenated' handheld instruments.

  13. The state of the art in static and dynamic games

    NARCIS (Netherlands)

    De Giovanni, P.

    2009-01-01

    Purpose - The purpose of this paper is to investigate the state of the art in static and dynamic games (or inter-firm relationships). This research area has changed significantly over the last 25 years through the development of phenomena such as the supply chain and the progressive overcoming of

  14. State of the art report on design for X

    DEFF Research Database (Denmark)

    Papanikolaou, Apostolos; Andersen, Poul; Kristensen, Hans Otto Holmegaard

    2009-01-01

    The present State of the Art report aims at defining and reviewing the curent state of the ship design process in the frame of a holistic approach, accounting for various objectives and constraints. The report addresses mainly the design of transportation carriers, though some covered aspects...

  15. The state of the art in biomimetics

    International Nuclear Information System (INIS)

    Lepora, Nathan F; Prescott, Tony J; Verschure, Paul

    2013-01-01

    Biomimetics is a research field that is achieving particular prominence through an explosion of new discoveries in biology and engineering. The field concerns novel technologies developed through the transfer of function from biological systems. To analyze the impact of this field within engineering and related sciences, we compiled an extensive database of publications for study with network-based information analysis techniques. Criteria included publications by year and journal or conference, and subject areas judged by popular and common terms in titles. Our results reveal that this research area has expanded rapidly from less than 100 papers per year in the 1990s to several thousand papers per year in the first decade of this century. Moreover, this research is having impact across a variety of research themes, spanning robotics, computer science and bioengineering. In consequence, biomimetics is becoming a leading paradigm for the development of new technologies that will potentially lead to significant scientific, societal and economic impact in the near future. (perspective)

  16. The job demands-resources model : state of the art

    NARCIS (Netherlands)

    Bakker, A.B.; Demerouti, E.

    2007-01-01

    Purpose - The purpose of this paper is to give a state-of-the art overview of the Job Demands-Resources (JD-R) model Design/methodology/approach - The strengths and weaknesses of the demand-control model and the effort-reward imbalance model regarding their predictive value for employee well being

  17. Wave Modelling - The State of the Art

    Science.gov (United States)

    2007-09-27

    8217) - -16 C-Ax( M) (I - 2y) -N +1CgAx’(1 -y)(6y’ - 6y + 1) + O(At4), (8.2) 24OX where p is the Courant- Friedrichs -Lewy (CFL) number, j = CgxAt/Ax. Thus...attainable time step is at the best of the order of min- utes . For early third generation wave models, this was unacceptable, and methods were developed to be... Barbara Channel. In: Beal, R. (Ed.), 5th California Islands Symposium, March 29-31. Mineral Management Service, Santa Barbara , CA. Onorato, M., Osborne

  18. State of the Art ECR Ion Sources

    International Nuclear Information System (INIS)

    Xie, Z.Q.

    1997-01-01

    Electron Cyclotron Resonance (ECR) ion source which produces highly-charged ions is used in heavy ion accelerators worldwide. Applications also found in atomic physics research and industry ion implantation. ECR ion source performance continues to improve, especially in the last few years with new techniques, such as multiple-frequency plasma heating and better methods to provide extra cold electrons, combined with higher magnetic mirror fields. So far more than 1 emA of multiply-charged ions such as He 2+ and O 6+ , and 30 eμA of Au 32+ , 1.1 eμA of 238 U 48+ , and epA currents of very high charge states such as 86 Kr 35+ and 238 U 60+ have been produced

  19. State of the art in video system performance

    Science.gov (United States)

    Lewis, Michael J.

    1990-01-01

    The closed circuit television (CCTV) system that is onboard the Space Shuttle has the following capabilities: camera, video signal switching and routing unit (VSU); and Space Shuttle video tape recorder. However, this system is inadequate for use with many experiments that require video imaging. In order to assess the state-of-the-art in video technology and data storage systems, a survey was conducted of the High Resolution, High Frame Rate Video Technology (HHVT) products. The performance of the state-of-the-art solid state cameras and image sensors, video recording systems, data transmission devices, and data storage systems versus users' requirements are shown graphically.

  20. Augmented Reality and Mobile Learning: The State of the Art

    Science.gov (United States)

    FitzGerald, Elizabeth; Ferguson, Rebecca; Adams, Anne; Gaved, Mark; Mor, Yishay; Thomas, Rhodri

    2013-01-01

    In this paper, the authors examine the state of the art in augmented reality (AR) for mobile learning. Previous work in the field of mobile learning has included AR as a component of a wider toolkit but little has been done to discuss the phenomenon in detail or to examine in a balanced fashion its potential for learning, identifying both positive…

  1. Guide to state-of-the-art electron devices

    CERN Document Server

    2013-01-01

    Concise, high quality and comparative overview of state-of-the-art electron device development, manufacturing technologies and applications Guide to State-of-the-Art Electron Devices marks the 60th anniversary of the IEEE Electron Devices Committee and the 35th anniversary of the IEEE Electron Devices Society, as such it defines the state-of-the-art of electron devices, as well as future directions across the entire field. Spans full range of electron device types such as photovoltaic devices, semiconductor manufacturing and VLSI technology and circuits, covered by IEEE Electron and Devices Society Contributed by internationally respected members of the electron devices community A timely desk reference with fully-integrated colour and a unique lay-out with sidebars to highlight the key terms Discusses the historical developments and speculates on future trends to give a more rounded picture of the topics covered A valuable resource R&D managers; engineers in the semiconductor industry; applied scientists...

  2. State of the art of teledermatopathology.

    Science.gov (United States)

    Massone, Cesare; Brunasso, Alexandra M G; Campbell, Terri M; Soyer, H Peter

    2008-10-01

    Teledermatopathology may involve real-time transmission of images from distant locations to consulting pathologists by the remote manipulation of a robotic microscope. Alternatively, the static store-and-forward option involves the single-file transmission of subjectively preselected and captured areas of microscopic images by a referring physician. The recent introduction of virtual slide systems (VSS) involves the digitization of whole slides at high resolution thus enabling the user to view any part of the specimen at any magnification. Such technology has surmounted previous restrictions caused by the size of preselected areas and specimen sampling for telepathology. In terms of client access, these VSS may be stored on a virtual slide server, made available on the Web for remote consultation by pathologists via an integrated virtual slide client network. Despite store-and-forward teledermatopathology being the most frequently used and less expensive approach to teledermatopathology, VSS represents the future in this discipline. The recent pilot studies suggest that the use of remote expert consultants in diagnostic dermatopathology can be integrated into daily routine, teleconsultation, and teleteaching. The new technology enables rapid and reproducible diagnoses, but despite its usability, VSS is not completely feasible for teledermatopathology of inflammatory skin diseases as the performance seems to be influenced by the availability of complete clinical data. Improvements in the diagnostic facility will no doubt follow from further development of the VSS, the slide processor, and of course training in the use of virtual microscope. Undoubtedly, as technology becomes even more sophisticated in the future, VSS will overcome the present drawbacks and find its place in all facets of teledermatopathology.

  3. State of the art of ICD programming

    DEFF Research Database (Denmark)

    Mastenbroek, M H; Pedersen, Susanne S.; Versteeg, H

    2014-01-01

    , were eligible to participate. In all patients a prolonged detection of 60/80 intervals was programmed. The primary objective of the study is to investigate whether enhanced programming to further reduce ICD therapies is safe. The secondary objective is to examine the impact of enhanced programming...

  4. Ascertaining the international state of the art of PSA methodology

    International Nuclear Information System (INIS)

    Linden, J. von

    1998-01-01

    Plant-specific PSAs, to be performed within the framework of the Periodic Safety Review of German Nuclear Power Plants require further development of the methodology. For that purpose foreign PSA-guidelines and PSA-reviewes as well as relevant literature are examined and appropriate insights are adopted within task A.2 of project SR 2096. The main goal of these activities is to achieve a comparison of the state of the art of PSA-methodologies applied abroad and in Germany. The German state of the art refers to the extent as is documented in the German PSA Guide (Leitfaden Probabilistische Sicherheitsanalyse /PSUe97/) which has to be used for the Periodic Safety Review of German Nuclear Power Plants. The structure for the evaluation is based on the working steps of a PSA. In total, according to the objectives of the Periodic Safety Review the German approach for plant-specific PSAs based on the German PSA Guide is conform to the state of the art abroad. Identified deviations in some details are evaluated reflecting the view of GRS. Particular aspects resulting from the evaluation should be considered for further development of the German PSA Guide. (orig.) [de

  5. State-of-the-art of home networking

    NARCIS (Netherlands)

    Koonen, A.M.J.; Popov, M.

    2012-01-01

    To introduce the Symposium on "Indoor Optical Networks: a Promising Way to a Converged Service Delivery", this presentation will give a brief overview of state-of-the-art home networking architectures, technologies and applications covering both technical and techno-economic aspects.

  6. State of The Art Ilmu Administrasi Negara

    OpenAIRE

    Tjokrowinoto, Moeljarto

    2002-01-01

    The study of Public Adminitstration has been shifting, both in terms of its substance and its approach/methodology. The shifting has been driven by the dissatisfaction to empirical/positivistic approach which, in fact, took place within the entire body of social science. Within the light of such dissatisfaction, the scholars of public administration increasingly more sensitive to contextual aspect of public administration. Their interest also becoming more focused of the issue of policy-makin...

  7. Global energy outlooks. State of the art

    International Nuclear Information System (INIS)

    Bobin, J.L.; Nifenecker, H.; Stephan, C.

    1999-01-01

    Since two year, the SFP (French Society of Physics) began a debate on the Energy of the 21 century, by the way of regional conferences. This debate allowed the publication of synthesis documents about elements discussed during these conference. This document presents the foreseeable evolution of the energy demand, taking into account the reserves; the selected production forms consequences in terms of nuisances; the part of the nuclear energy and the renewable energies. The costs are also discussed and many statistical data are provided. (A.L.B.)

  8. Sensors and Technologies in Spain: State-of-the-Art

    Directory of Open Access Journals (Sweden)

    Gonzalo Pajares

    2014-08-01

    Full Text Available The aim of this special issue was to provide a comprehensive view on the state-of-the-art sensor technology in Spain. Different problems cause the appearance and development of new sensor technologies and vice versa, the emergence of new sensors facilitates the solution of existing real problems. [...

  9. State of the art. Neonatal respiratory failure.

    Science.gov (United States)

    Parker, L A

    1999-12-01

    Advances in ventilatory management of respiratory distress in the newborn have made dramatic strides during the last decade. Innovative treatments such as PTV, HFV, liquid ventilation, and NO therapy are just beginning to have an impact on the care of neonates in the NICU. These treatment modalities should continue to have an effect on the care of the newborn infant well into the future.

  10. State of The Art Ilmu Administrasi Negara

    Directory of Open Access Journals (Sweden)

    Moeljarto Tjokrowinoto

    2002-11-01

    Full Text Available The study of Public Adminitstration has been shifting, both in terms of its substance and its approach/methodology. The shifting has been driven by the dissatisfaction to empirical/positivistic approach which, in fact, took place within the entire body of social science. Within the light of such dissatisfaction, the scholars of public administration increasingly more sensitive to contextual aspect of public administration. Their interest also becoming more focused of the issue of policy-making. These two aspect eventually brougt about the birth of new public administration.

  11. Rare events: a state of the art

    International Nuclear Information System (INIS)

    Uppuluri, V.R.R.

    1980-12-01

    The study of rare events has become increasingly important in the context of nuclear safety. Some philosophical considerations, such as the framework for the definition of a rare event, rare events and science, rare events and trans-science, and rare events and public perception, are discussed. The technical work of the Task Force on problems of Rare Events in the Reliability Analysis of Nuclear Plants (1976-1978), sponsored by OECD, is reviewed. Some recent technical considerations are discussed, and conclusions are drawn. The appendix contains an essay written by Anne E. Beachey, under the title: A Study of Rare Events - Problems and Promises

  12. Interfacial heat transfer - State of the art

    International Nuclear Information System (INIS)

    Yadigaroglu, G.

    1987-01-01

    Interfacial heat exchanges control the interfacial mass exchange rate, depend on the interfacial area, and are tied to the prediction of thermal nonequilibrium. The nature of the problem usually requires the formulation of mechanistic laws and precludes the general use of universal correlations. This is partly due to the fact that the length scale controlling the interfacial exchanges varies widely from one situation to another and has a strong influence on the exchange coefficients. Within the framework of the ''two-fluid models'', the exchanges occurring at the interfaces are explicitly taken into consideration by the jump condition linking the volumetric mass exchange (evaporation) rate between the phases, to the interfacial energy transfer rates

  13. [Osteoporosis: Current state of the art].

    Science.gov (United States)

    Verbovoy, A F; Pashentseva, A V; Sharonova, L A

    As of now, osteoporosis (OP) is one of the most important sociomedical problems because of its high prevalence and resultant disability, as well as significant mortality attributable to complications. The current strategy for providing care for patients of OP is its early diagnosis, by determining the high risk of fractures, and early pathogenetic treatment. The article gives an update on the epidemiology, risk factors, diagnosis, and treatment of OP.

  14. Irreversible electroporation: state of the art

    Directory of Open Access Journals (Sweden)

    Wagstaff PGK

    2016-04-01

    Full Text Available Peter GK Wagstaff,1 Mara Buijs,1 Willemien van den Bos,1 Daniel M de Bruin,2 Patricia J Zondervan,1 Jean JMCH de la Rosette,1 M Pilar Laguna Pes1 1Department of Urology, 2Department of Biomedical Engineering and Physics, Academic Medical Center, Amsterdam, the Netherlands Abstract: The field of focal ablative therapy for the treatment of cancer is characterized by abundance of thermal ablative techniques that provide a minimally invasive treatment option in selected tumors. However, the unselective destruction inflicted by thermal ablation modalities can result in damage to vital structures in the vicinity of the tumor. Furthermore, the efficacy of thermal ablation intensity can be impaired due to thermal sink caused by large blood vessels in the proximity of the tumor. Irreversible electroporation (IRE is a novel ablation modality based on the principle of electroporation or electropermeabilization, in which electric pulses are used to create nanoscale defects in the cell membrane. In theory, IRE has the potential of overcoming the aforementioned limitations of thermal ablation techniques. This review provides a description of the principle of IRE, combined with an overview of in vivo research performed to date in the liver, pancreas, kidney, and prostate. Keywords: irreversible electroporation, IRE, tumor, ablation, focal therapy, cancer

  15. The Brazilian state-of-the-art of hydrolysis; Estado da arte da hidrolise no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Carioca, Jose Osvaldo Beserra; Paula, Haroldo Cesar Beserra de; Lal Arora, Harbans; Selvam, P.V. Pannir [Nucleo de Fontes Nao-Convencionais de Energia, Fortaleza, CE, (Brazil)

    1988-12-31

    This paper presents a study of the state-of-the-art of technologies developed for acid and enzymatic hydrolysis of lignin and cellulose materials in Brazil. The information collected leads us to conclude that Brazil has achieved a high level of technological development. However, the industrial projects for production of alcohol from cassava have not proved successful due mainly to lack of agricultural experience and its low productivity. (author) 26 refs., 13 figs., 2 tabs.

  16. Entrepreneurship Education: State of the Art

    Science.gov (United States)

    Sánchez García, José Carlos; Ward, Alexander; Hernández, Brizeida; Florez, Jenny Lizette

    2017-01-01

    Job uncertainty and ambiguity is a reality in many current societies, therefore, the idea of self-employment has taken a more active role, not only out of necessity, but also because it brings innovation and development to societies. In view of this situation, the following question arises: how can we strengthen the entrepreneurial spirit of our…

  17. Three State-of-the-Art Methods for Condition Monitoring

    NARCIS (Netherlands)

    Grimmelius, H.T.; Meiler, P.P.; Maas, H.L.M.M.; Bonnier, B.; Grevink, J.S.; Kuilenburg, R.F. van

    1999-01-01

    This paper describes and compares three different state-of-the-art condition monitoring techniques: first principles, feature extraction, and neural networks. The focus of the paper is on the application of the techniques, not on the underlying theory. Each technique is described briefly and is

  18. State of the art undersøgelse

    DEFF Research Database (Denmark)

    Nielsen, Nils

    1998-01-01

    Dette skrift omhandler nogle af de erfaringer der til dato er opnået i forbindelse med standby projektets udførelse. Hovedtemaet er en “State of the art undersøgelse” der omhandler standby-spændingsforsyninger, samt komponenter der kan anvendes til konstruktion af dem......Dette skrift omhandler nogle af de erfaringer der til dato er opnået i forbindelse med standby projektets udførelse. Hovedtemaet er en “State of the art undersøgelse” der omhandler standby-spændingsforsyninger, samt komponenter der kan anvendes til konstruktion af dem...

  19. Upper gastrointestinal bleeding - state of the art.

    Science.gov (United States)

    Szura, Mirosław; Pasternak, Artur

    2014-01-01

    Upper gastrointestinal (GI) bleeding is a condition requiring immediate medical intervention, with high associated mortality exceeding 10%. The most common cause of upper GI bleeding is peptic ulcer disease, which largely corresponds to the intake of NSAIDs and Helicobacter pylori infection. Endoscopy is the essential tool for the diagnosis and treatment of active upper GI hemorrhage. Endoscopic therapy together with proton pump inhibitors and eradication of Helicobacter pylori significantly reduces rebleeding rates, mortality and number of emergency surgical interventions. This paper presents contemporary data on the diagnosis and treatment of upper gastrointestinal bleeding.

  20. Diagnostic bronchoscopy: state of the art

    Directory of Open Access Journals (Sweden)

    V. Ninane

    2010-09-01

    Full Text Available Since the introduction of the flexible fibreoptic bronchoscope in the late 1960s there have been relatively few technological advances for three decades, aside from the development of a white light video bronchoscope with a miniature charge-coupled device built in its tip replacing the fibreoptics. White light flexible videobronchoscopy with its ancillary devices (forceps biopsy, bronchial brushing, bronchoalveolar lavage, bronchial washings and transbronchial needle aspiration has long been the only established diagnostic bronchoscopic technique. With the advances in microtechnology over the past two decades, recent technical developments such as autofluorescence bronchoscopy and endoscopic ultrasound allow better evaluation of endobronchial, mediastinal and parenchymal lesions.

  1. Chemoradiotherapy and state of the art

    International Nuclear Information System (INIS)

    Cosset, J.M.

    1998-01-01

    The idea of combining radiotherapy and chemotherapy goes back to the very beginning of the antimitotic drugs era. At that time this association was mainly based on a simple concept: spatial cooperation. The first period was one of so-called 'adjuvant' (post-irradiation) chemotherapy, soon followed by the once-fashionable 'neo-adjuvant' chemotherapy era. Today, concomitant administration of both therapies, mainly based on radiosensitization, appears promising, although the previous schemes were clearly efficient for some specific indications. In 1998, radio-chemotherapy combinations represent an unavoidable part of the anticancer strategy. A number of them have been recognized as the standard treatment for some localizations, and there is little risk to imagine that this number will increase within the next decade. (author)

  2. Intraoperative mechanical ventilation: state of the art.

    Science.gov (United States)

    Ball, Lorenzo; Costantino, Federico; Orefice, Giulia; Chandrapatham, Karthikka; Pelosi, Paolo

    2017-10-01

    Mechanical ventilation is a cornerstone of the intraoperative management of the surgical patient and is still mandatory in several surgical procedures. In the last decades, research focused on preventing postoperative pulmonary complications (PPCs), both improving risk stratification through the use of predictive scores and protecting the lung adopting so-called protective ventilation strategies. The aim of this review was to give an up-to-date overview of the currently suggested intraoperative ventilation strategies, along with their pathophysiologic rationale, with a focus on challenging conditions, such as obesity, one-lung ventilation and cardiopulmonary bypass. While anesthesia and mechanical ventilation are becoming increasingly safe practices, the contribution to surgical mortality attributable to postoperative lung injury is not negligible: for these reasons, the prevention of PPCs, including the use of protective mechanical ventilation is mandatory. Mechanical ventilation should be optimized providing an adequate respiratory support while minimizing unwanted negative effects. Due to the high number of surgical procedures performed daily, the impact on patients' health and healthcare costs can be relevant, even when new strategies result in an apparently small improvement of outcome. A protective intraoperative ventilation should include a low tidal volume of 6-8 mL/kg of predicted body weight, plateau pressures ideally below 16 cmH2O, the lowest possible driving pressure, moderate-low PEEP levels except in obese patients, laparoscopy and long surgical procedures that might benefit of a slightly higher PEEP. The work of the anesthesiologist should start with a careful preoperative visit to assess the risk, and a close postoperative monitoring.

  3. Charge sensitive amplifies. The state of arts

    Energy Technology Data Exchange (ETDEWEB)

    Mori, Kunishiro [Clear Pulse Co., Tokyo (Japan)

    1996-07-01

    In the radiation detectors, signals are essentially brought with charges produced by radiation, then it is naturally the best way to use a charge sensitive amplifier (CSA) system to extract those signals. The CSA is thought to be the best amplifier suitable to almost all the radiation detectors, if neglecting economical points of view. The CSA has been only applied to special fields like radiation detection because the concept of `charges` is not so universal against the concepts of `voltage` and `current`. The CSA, however, is low in noise and a high speed amplifier and may be applicable not only to radiation measurement but also piezoelectric devices and also bolometers. In this article, noise in the CSA, basic circuit on the CSA, concepts of `equivalent noise charge` (ENC), a method for the ENC, and importance of the `open-loop gain` in the CSA to achieve better performance of it and how to realize in a practical CSA were described. And, characteristics on a counting rate of the CSA, various circuit used in the CSA, and CSAs which are commercially available at present and special purpose CSAs were also introduced. (G.K.)

  4. Paediatric thoracoscopy: State of the art | Van Niekerk | South ...

    African Journals Online (AJOL)

    Many advanced procedures, including lobectomy, repair of tracheo-oesophageal fistula, excision of mediastinal tumours and diaphragmatic hernia repairs, are being done routinely in paediatric surgery centres around the world. This article reviews the state of the art of thoracoscopic surgery in children. The author selected ...

  5. State-of-the-Art in Open Courseware Initiatives Worldwide

    Science.gov (United States)

    Vladoiu, Monica

    2011-01-01

    We survey here the state-of-the-art in open courseware initiatives worldwide. First, the MIT OpenCourseWare project is overviewed, as it has been the real starting point of the OCW movement. Usually, open courseware refers to a free and open digital publication of high quality university level educational materials that are organized as courses,…

  6. State of the art Advanced Driver Assistance Systems (ADAS).

    NARCIS (Netherlands)

    OEI, H.-L.

    2017-01-01

    An overview of state-of-the-art ADA Advanced Driver Assistance systems is given. First a main structuring system for the ADA systems is presented, needed for purposes of relevancy, and consistency : the three phases in the accident process, i.e. pre-crash, crash and post-crash; the driving task at

  7. Accelerator mass spectrometry: state of the art

    Energy Technology Data Exchange (ETDEWEB)

    Tuniz, C. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

    1996-12-31

    Accelerator Mass Spectrometry (AMS) is the analytical technique of choice for the detection of long-lived radionuclides which cannot be practically analysed with decay counting or conventional mass spectrometry. The main use of AMS has been in the analysis of radiocarbon and other cosmogenic radionuclides for archaeological, geological and environmental applications. In addition, AMS has been recently applied in biomedicine to study exposure of human tissues to chemicals and biomolecules at attomole levels. There is also a world-wide effort to analyse rare nuclides of heavier masses, such as long-lived actinides, with important applications in safeguards and nuclear waste disposal. The use of AMS is limited by the expensive accelerator technology required and there are several attempts to develop smaller and cheaper AMS spectrometers. 5 refs.

  8. Accelerator mass spectrometry: state of the art

    Energy Technology Data Exchange (ETDEWEB)

    Tuniz, C [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

    1997-12-31

    Accelerator Mass Spectrometry (AMS) is the analytical technique of choice for the detection of long-lived radionuclides which cannot be practically analysed with decay counting or conventional mass spectrometry. The main use of AMS has been in the analysis of radiocarbon and other cosmogenic radionuclides for archaeological, geological and environmental applications. In addition, AMS has been recently applied in biomedicine to study exposure of human tissues to chemicals and biomolecules at attomole levels. There is also a world-wide effort to analyse rare nuclides of heavier masses, such as long-lived actinides, with important applications in safeguards and nuclear waste disposal. The use of AMS is limited by the expensive accelerator technology required and there are several attempts to develop smaller and cheaper AMS spectrometers. 5 refs.

  9. Regenerative endodontics: A state of the art

    Directory of Open Access Journals (Sweden)

    Rashmi Bansal

    2011-01-01

    Full Text Available Scientific advances in the creation of restorative biomaterials, in vitro cell culture technology, tissue grafting, tissue engineering, molecular biology and the human genome project provide the basis for the introduction of new technologies into dentistry. Non-vital infected teeth have long been treated with root canal therapy (for mature root apex and apexification (for immature root apex, or doomed to extraction. Although successful, current treatments fail to re-establish healthy pulp tissue in these teeth. But, what if the non-vital tooth could be made vital once again? That is the hope offered by regenerative endodontics, an emerging field focused on replacing traumatized and diseased pulp with functional pulp tissue. Restoration of vitality of non-vital tooth is based on tissue engineering and revascularization procedures. The purpose of this article is to review these biological procedures and the hurdles that must be overcome to develop regenerative endodontic procedures.

  10. PARA'04, State-of-the-art in scientific computing

    DEFF Research Database (Denmark)

    Madsen, Kaj; Wasniewski, Jerzy

    This meeting in the series, the PARA'04 Workshop with the title ``State of the Art in Scientific Computing'', was held in Lyngby, Denmark, June 20-23, 2004. The PARA'04 Workshop was organized by Jack Dongarra from the University of Tennessee and Oak Ridge National Laboratory, and Kaj Madsen and J...

  11. Donkey milk production: state of the art

    Directory of Open Access Journals (Sweden)

    Silvia Vincenzetti

    2010-01-01

    Full Text Available Milk is one of the most common causes of food allergies among children under one year of age. No specific therapy exists for this allergy, and thus the only feasible response is to avoid assumption of milk and derived products. Studies conducted on the serum of children with hypersensi- tivity to milk have shown that caseins are the proteins with the greater allergenic potential. However, in some cases, children have also shown hypersensitivity to the β-lactoglobulines and to the α-lactal- bumins. When food intolerance is diagnosed in an infant, it is often necessary to impose a period of total parenteral feeding, followed by breast feeding, considered the most correct method of re-feeding. When human milk can not be given, alternative food sources must be sought. Clinical studies have demonstrated that donkey milk could substitute breast feeding in infants affected by severe Ig-E me- diated milk allergies. In these subjects, donkey milk is not only useful, but also safer than other types of milk. In fact donkey milk composition in lipids (high levels of linoleic and linolenic acid and pro- teins (low caseins content is very close to human milk. Lysozyme content in donkey milk resulted to be very high (mean value 1.0 mg/ml if compared to bovine (traces, caprine (traces and human milk. The high lysozyme content of donkey milk may be responsible of the low bacterial count reported in literature and also makes this milk suitable to prevent intestine infections to infants. Among seropro- teins, β-lactoglobulin and α-lactalbumin content in donkey milk was respectively 3.75 and 1.80 mg/ml and remained substancially the same during the different stages of lactation.

  12. Rapid Prototyping: State of the Art

    National Research Council Canada - National Science Library

    Freitag, Douglas; Wohlers, Terry T; Philippi, Therese

    2003-01-01

    .... It expands upon previous MTIAC reports on this topic and describes the status of equipment suppliers in terms of technical advancements, market size and share, existing and potential applications...

  13. Aquifer restoration: state of the art

    National Research Council Canada - National Science Library

    Knox, Robert C; Knox, R. C

    1986-01-01

    ... of chemicals or waste materials, improper underground injection of liquid wastes, and placement of septic tank systems in hydrologically and geologically unsuitable locations. Incidents of aquifer pollution from man's waste disposal activities have been discovered with increasing regularity. At the same time, demands for groundwater usage have been inc...

  14. Photovoltaic solar energy: State of the art

    International Nuclear Information System (INIS)

    Van Sark, W.G.J.H.M.; Sinke, W.C.

    1993-03-01

    Attention is paid to developments in the Netherlands of all aspects of photovoltaic (PV) energy: solar cells, components, PV-systems and all kinds of applications. Efficiencies of the present solar cell types still increase, varying from more than 10% for organic/TiO 2 solar cells to 33% for GaAs/GaSb concentrator tandem solar cells. 3 figs., 2 ills., 1 tab

  15. Thorium and health: state of the art

    International Nuclear Information System (INIS)

    Leiterer, A.; Berard, Ph.; Menetrier, F.

    2010-01-01

    This report reviews data available in the literature on the subject: 'thorium and health'. Thorium is a natural radioactive element of the actinide series. It is widely distributed in the earth's crust and 99% is found as isotope thorium-232. Its various uses are explained by its chemical, physical, and nuclear properties. As a potential nuclear fuel, thorium is still in demonstration in pilot scale reactors. But thorium has already multiple and sometimes unknown industrial uses. Some mass market products are concerned like light bulb. This raises the issue of wastes, and of exposures of workers and public. Environmental exposure via food and drink of the general population is low, where as workers can be exposed to significant doses, especially during ore extraction. Data on bio-monitoring of workers and biokinetic of thorium, in particular those provided by ICRP, are gathered here. Studies on health effects and toxicity of thorium are scarce and mostly old, except outcomes of its previous medical use. Studies on other forms of thorium should be undertaken to provide substantial data on its toxicity. Concerning treatment, Ca-DTPA is the recommended drug even if its efficacy is moderate. LiHOPO molecule shows interesting results in animals, and further research on chelating agents is needed. (authors)

  16. Reactor Dosimetry State of the Art 2008

    Science.gov (United States)

    Voorbraak, Wim; Debarberis, Luigi; D'Hondt, Pierre; Wagemans, Jan

    2009-08-01

    Oral session 1: Retrospective dosimetry. Retrospective dosimetry of VVER 440 reactor pressure vessel at the 3rd unit of Dukovany NPP / M. Marek ... [et al.]. Retrospective dosimetry study at the RPV of NPP Greifswald unit 1 / J. Konheiser ... [et al.]. Test of prototype detector for retrospective neutron dosimetry of reactor internals and vessel / K. Hayashi ... [et al.]. Neutron doses to the concrete vessel and tendons of a magnox reactor using retrospective dosimetry / D. A. Allen ... [et al.]. A retrospective dosimetry feasibility study for Atucha I / J. Wagemans ... [et al.]. Retrospective reactor dosimetry with zirconium alloy samples in a PWR / L. R. Greenwood and J. P. Foster -- Oral session 2: Experimental techniques. Characterizing the Time-dependent components of reactor n/y environments / P. J. Griffin, S. M. Luker and A. J. Suo-Anttila. Measurements of the recoil-ion response of silicon carbide detectors to fast neutrons / F. H. Ruddy, J. G. Seidel and F. Franceschini. Measurement of the neutron spectrum of the HB-4 cold source at the high flux isotope reactor at Oak Ridge National Laboratory / J. L. Robertson and E. B. Iverson. Feasibility of cavity ring-down laser spectroscopy for dose rate monitoring on nuclear reactor / H. Tomita ... [et al.]. Measuring transistor damage factors in a non-stable defect environment / D. B. King ... [et al.]. Neutron-detection based monitoring of void effects in boiling water reactors / J. Loberg ... [et al.] -- Poster session 1: Power reactor surveillance, retrospective dosimetry, benchmarks and inter-comparisons, adjustment methods, experimental techniques, transport calculations. Improved diagnostics for analysis of a reactor pulse radiation environment / S. M. Luker ... [et al.]. Simulation of the response of silicon carbide fast neutron detectors / F. Franceschini, F. H. Ruddy and B. Petrović. NSV A-3: a computer code for least-squares adjustment of neutron spectra and measured dosimeter responses / J. G

  17. Leadership and Fairness: The state of the art.

    OpenAIRE

    van Knippenberg, D.; de Cremer, D.; van Knippenberg, B.M.

    2007-01-01

    textabstractResearch in leadership effectiveness has paid less to the role of leader fairness than probably it should have. More recently, this has started to change. To capture this development, we review the empirical literature in leadership and fairness to define the field of leadership and fairness, to assess the state of the art, and to identify a research agenda for future efforts in the field. The review shows that leader distributive, procedural, and especially interactional fairness...

  18. Rapid Prototyping: State of the Art Review

    Science.gov (United States)

    2003-10-23

    Steel H13 Tool Steel CP Ti, Ti-6Al-4V Titanium Tungsten Copper Aluminum Nickel...The company’s LENS 750 and LENS 850 machines (both $440,000 to $640,000) are capable of producing parts in 16 stainless steel , H13 tool steel ...machining. 20 The Arcam EBM S12 model sells for $500,000 and is capable of processing two materials. One is H13 tool steel , while the other

  19. Building ventilation, state of the art, prospective

    International Nuclear Information System (INIS)

    1995-10-01

    This conference is composed of 21 communications and 21 posters in the domain of building ventilation and indoor air quality; the main themes are: indoor air quality assessment and optimization; performance enhancement and optimization of ventilation systems and equipment; ventilation systems for renovated and rehabilitated buildings; French and European regulations, standardizations and certifications; experimental and numerical simulation studies concerning ventilation systems, air flow, temperature distribution, air quality, radon decontamination, thermal comfort and acoustic levels in buildings

  20. Pathway analysis: State of the art

    Directory of Open Access Journals (Sweden)

    Miguel Angel eGarcía-Campos

    2015-12-01

    Full Text Available Pathway analysis is a set of widely used tools for research in life sciences intended to give meaning to high-throughput biological data. The methodology of these tools settles in the gathering and usage of knowledge that comprise biomolecular functioning, coupled with statistical testing and other algorithms. Despite their wide employment, pathway analysis foundations and overall background may not be fully understood, leading to misinterpretation of analysis results. This review attempts to comprise the fundamental knowledge to take into consideration when using pathway analysis as a hypothesis generation tool. We discuss the key elements that are part of these methodologies, their capabilities and current deficiencies. We also present an overview of current and all-time popular methods, highlighting different classes across them. In doing so, we show the exploding diversity of methods that pathway analysis encompasses, point out commonly overlooked caveats, and direct attention to a potential new class of methods that attempt to zoom the analysis scope to the sample scale.

  1. Cardiovascular nuclear medicine: state of the art

    International Nuclear Information System (INIS)

    Milcinski, M.

    1994-01-01

    Evaluation of myocardial function: first pass studies can be obtained at time of almost every investigation. Assessment of myocardial function is improved using short living isotopes and repeated stress studies as well as gated tomographic imaging and technetium perfusion agents. Nonimaging probes have limited value in continuous monitoring of cardiac function. Stress-echo (transoesophageal) is competitive to nuclear techniques in assessment of contractility. Myocardial perfusion imaging using knowledge from PET and available tomographic or planar imaging modalities gives unique possibilities to detect viable myocardium. Thallium remains the tracer for myocardial viability evaluation on convenient systems when new imaging protocols are applied. New technetium labeled radiopharmaceuticals allow better imaging possibilities for SPECT techniques. Several pharmacological agents are available in addition to traditional physical stress for assessing hemodynamic importance of coronary artery stenoses for diagnosis and in treatment evaluation. Imaging myocardial necrosis is marginal in conformation of majority of acute myocardial infarctions. It is used to assess area at risk after thrombolytic therapy for evolving myocardial infarction using dual-isotope techniques (perfusion agent with infarct-avid tracer in dual isotope technique). Antimyosin antibodies are useful also for confirmation of subacute or remote infarction, myocarditis or rejection after cardiac transplantation. Metabolic and receptor imaging are promising in evaluation of cardiomyopathies and myocardial viability not only on positron emission tomography but also on available imaging systems. In conclusion, new techniques and new radiopharmaceuticals for cardiovascular imaging allow more accurate answers to clinical problems. As the possibilities for research and clinical PET are limited, further transfer of PET-results to convenient imaging modalities is promising. (author)

  2. State of the art: alumina ceramics for energy applications

    International Nuclear Information System (INIS)

    Hauth, W.E.; Stoddard, S.D.

    1978-01-01

    Prominent ceramic raw materials and products manufacturers were surveyed to determine the state of the art for alumina ceramic fabrication. This survey emphasized current capabilities and limitations for fabrication of large, high-density, high-purity, complex shapes. Some directions are suggested for future needs and development

  3. Nuclear power plant decommissioning: state-of-the-art review

    International Nuclear Information System (INIS)

    Williams, D.H.

    1984-01-01

    A brief orientation to the state-of-the-art of nuclear power plant decommissioning discusses the related areas of experience, tools and techniques, and planning. There have been 68 nuclear reactor decommissionings to date, including 9 power plants, some of which were mothballed. The picture suggests that the term art may be misapplied since decommissioning is now more of a mature commercial industrial than a research and development endeavor. It also suggests that the nuclear industry has shown foresight by preparing for it before a crisis situation developed. Some of this has already influenced operators of coal power plants, especially where hazardous materials may be involved. 33 references, 1 table

  4. Mobile IP: state of the art report

    NARCIS (Netherlands)

    Karagiannis, Georgios; Heijenk, Geert

    Due to roaming, a mobile device may change its network attachment each time it moves to a new link. This might cause a disruption for the Internet data packets that have to reach the mobile node. Mobile IP is a protocol, developed by the Mobile IP Internet Engineering Task Force (IETF) working

  5. State of the Art Telemedicine/Telehealth

    National Research Council Canada - National Science Library

    Bashshur, Rashid

    2001-01-01

    .... Reports were derived for the following topics: network organizational models, technology development and application, clinical applications, public health, disease surveillance and personal health, education, and telemedicine diffusion...

  6. New simulators from old - achieving state-of-the-art simulation without state-of-the-art costs

    International Nuclear Information System (INIS)

    Heilmeier, H.J.; Rosser, R.M.; Fyffe, K.L.; Gaerttner, G.F.; Chulick, E.T.

    1990-01-01

    Achieving a state-of-the-art simulator for operator training requires neither the expensive remodeling of old simulators nor the acquisition of very expensive new machines. In this paper the authors present two distinct cases where older training simulators have been upgraded to meet training requirements with a minimum of inexpensive hardware additions, including plug-in/-out panels, and software changes

  7. State of the art survey of network operating systems development

    Science.gov (United States)

    1985-01-01

    The results of the State-of-the-Art Survey of Network Operating Systems (NOS) performed for Goddard Space Flight Center are presented. NOS functional characteristics are presented in terms of user communication data migration, job migration, network control, and common functional categories. Products (current or future) as well as research and prototyping efforts are summarized. The NOS products which are revelant to the space station and its activities are evaluated.

  8. State-of-the-art in Heterogeneous Computing

    Directory of Open Access Journals (Sweden)

    Andre R. Brodtkorb

    2010-01-01

    Full Text Available Node level heterogeneous architectures have become attractive during the last decade for several reasons: compared to traditional symmetric CPUs, they offer high peak performance and are energy and/or cost efficient. With the increase of fine-grained parallelism in high-performance computing, as well as the introduction of parallelism in workstations, there is an acute need for a good overview and understanding of these architectures. We give an overview of the state-of-the-art in heterogeneous computing, focusing on three commonly found architectures: the Cell Broadband Engine Architecture, graphics processing units (GPUs, and field programmable gate arrays (FPGAs. We present a review of hardware, available software tools, and an overview of state-of-the-art techniques and algorithms. Furthermore, we present a qualitative and quantitative comparison of the architectures, and give our view on the future of heterogeneous computing.

  9. Exchange rate predictability and state-of-the-art models

    OpenAIRE

    Yeșin, Pınar

    2016-01-01

    This paper empirically evaluates the predictive performance of the International Monetary Fund's (IMF) exchange rate assessments with respect to future exchange rate movements. The assessments of real trade-weighted exchange rates were conducted from 2006 to 2011, and were based on three state-of-the-art exchange rate models with a medium-term focus which were developed by the IMF. The empirical analysis using 26 advanced and emerging market economy currencies reveals that the "diagnosis" of ...

  10. Modelling and simulation SSM: latest state of the art technology

    CSIR Research Space (South Africa)

    Jahajeeah, N

    2005-10-01

    Full Text Available as one phase ? One Phase model ?Wider volume solid fraction 0 – 1 ? Implementation in Power Law Cut-Off Model (PLCO) of Procast Supporting the Manufacturing and Materials Industry in its quest for global competitiveness Assumptions of the PLCO Model... and Materials Industry in its quest for global competitiveness Modelling and Simulation SSM Latest state of the art technology N Jahajeeah Supporting the Manufacturing and Materials Industry in its quest for global competitiveness BEHAVIOUR OF THIXOTROPIC...

  11. Cultivating Demand for the Arts: Arts Learning, Arts Engagement, and State Arts Policy. Summary

    Science.gov (United States)

    Zakaras, Laura; Lowell, Julia F.

    2008-01-01

    The findings summarized in this report are intended to shed light on what it means to cultivate demand for the arts, why it is necessary and important to cultivate this demand, and what state arts agencies (SAAs) and other arts and education policymakers can do to help. The research considered only the benchmark arts central to public policy:…

  12. Electron beam melting state-of-the-art 1984

    International Nuclear Information System (INIS)

    Bakish, R.

    1984-01-01

    In 1984 electron beam melting and refining appear poised for an important new growth phase. The driving force for this phase is improved production economics made possible by technological advances. There is also a new and exciting growth application for electron beam melting: its use for surface properties beneficiation. This article is based in part on the content of the Conference on Electron Beam Melting and Refining, The State-of-the-Art 1983, held in November 1983 in Reno, Nevada

  13. State of the art of UO2 fuel fabrication processes

    International Nuclear Information System (INIS)

    Henke, M.; Klemm, U.

    1980-01-01

    Starting from the need of UO 2 for thermal power reactors in the period from 1980 to 1990 and the role of UF 6 conversion into UO 2 within the fuel cycle, the state-of-the-art of the three established industrial processes - ADU process, AUC process, IDR process - is assessed. The number of process stages and requirements on process management are discussed. In particular, the properties of the fabricated UO 2 powders, their influence on the following pellet production and on operational behaviour of the fuel elements under reactor conditions are described. Hence, an evaluation of the three essential conversion processes is derived. (author)

  14. The state of the art in intrusion prevention and detection

    CERN Document Server

    Pathan, Al-Sakib Khan

    2013-01-01

    The State of the Art in Intrusion Prevention and Detection analyzes the latest trends and issues surrounding intrusion detection systems in computer networks, especially in communications networks. Its broad scope of coverage includes wired, wireless, and mobile networks; next-generation converged networks; and intrusion in social networks.Presenting cutting-edge research, the book presents novel schemes for intrusion detection and prevention. It discusses tracing back mobile attackers, secure routing with intrusion prevention, anomaly detection, and AI-based techniques. It also includes infor

  15. State of the art: two-phase flow calibration techniques

    International Nuclear Information System (INIS)

    Stanley, M.L.

    1977-01-01

    The nuclear community faces a particularly difficult problem relating to the calibration of instrumentation in a two-phase flow steam/water environment. The rationale of the approach to water reactor safety questions in the United States demands that accurate measurements of mass flows in a decompressing two-phase flow be made. An accurate measurement dictates an accurate calibration. This paper addresses three questions relating to the state of the art in two-phase calibration: (1) What do we mean by calibration. (2) What is done now. (3) What should be done

  16. The state-of-the-art port of entry workshop

    Energy Technology Data Exchange (ETDEWEB)

    Godfrey, B.

    1995-05-01

    The increased demand for freight movements through international ports of entry and the signing of the North American Free Trade Agreement (NAFTA) have increased freight traffic at border ports of entry. The State-of-the-Art Port of Entry Workshop initiated a dialogue among technologists and stakeholders to explore the potential uses of technology at border crossings and to set development priorities. International ports of entry are both information and labor intensive, and there are many promising technologies that could be used to provide timely information and optimize inspection resources. Participants universally held that integration of technologies and operations is critical to improving port services. A series of Next Steps was developed to address stakeholder issues and national priorities, such as the National Transportation Policy and National Drug Policy. This report documents the views of the various stakeholders and technologists present at the workshop and outlines future directions of study.

  17. Orphan diseases: state of the drug discovery art.

    Science.gov (United States)

    Volmar, Claude-Henry; Wahlestedt, Claes; Brothers, Shaun P

    2017-06-01

    Since 1983 more than 300 drugs have been developed and approved for orphan diseases. However, considering the development of novel diagnosis tools, the number of rare diseases vastly outpaces therapeutic discovery. Academic centers and nonprofit institutes are now at the forefront of rare disease R&D, partnering with pharmaceutical companies when academic researchers discover novel drugs or targets for specific diseases, thus reducing the failure risk and cost for pharmaceutical companies. Considerable progress has occurred in the art of orphan drug discovery, and a symbiotic relationship now exists between pharmaceutical industry, academia, and philanthropists that provides a useful framework for orphan disease therapeutic discovery. Here, the current state-of-the-art of drug discovery for orphan diseases is reviewed. Current technological approaches and challenges for drug discovery are considered, some of which can present somewhat unique challenges and opportunities in orphan diseases, including the potential for personalized medicine, gene therapy, and phenotypic screening.

  18. CMOS image sensors: State-of-the-art

    Science.gov (United States)

    Theuwissen, Albert J. P.

    2008-09-01

    This paper gives an overview of the state-of-the-art of CMOS image sensors. The main focus is put on the shrinkage of the pixels : what is the effect on the performance characteristics of the imagers and on the various physical parameters of the camera ? How is the CMOS pixel architecture optimized to cope with the negative performance effects of the ever-shrinking pixel size ? On the other hand, the smaller dimensions in CMOS technology allow further integration on column level and even on pixel level. This will make CMOS imagers even smarter that they are already.

  19. One Step Closer to the Marketplace for State-of-the-Art Wind Turbine

    Science.gov (United States)

    Drivetrain | News | NREL One Step Closer to the Marketplace for State-of-the-Art Wind Turbine Drivetrain One Step Closer to the Marketplace for State-of-the-Art Wind Turbine Drivetrain April 1, 2016 modeling, and testing in state-of-the-art facilities designed to put the drivetrain through its paces

  20. PRA: an evaluation of state-of-the-art

    International Nuclear Information System (INIS)

    Joksimovich, V.

    1985-01-01

    Some elements of the probabilistic risk assessment (PRA) methodology can be characterized as mature and are even ready for some kind of a standardization effort. Other elements are still, however, in a rapid state of evolution. Questions are continuously being asked regarding maturity of PRA techniques vis-a-vis a regulatory decision-making process. Establishing a framework for evaluating state-of-the-art in any technological field is a challenging task. An implementation of a selected framework to a satisfactory conclusion is a monumental task. Of course, these types of issues can be discussed meaningfully only if they are tied to a particular application. The author's participation in the NSF-sponsored risk assessment project is discussed in the paper. The evaluation employed here makes use of the following five evaluation criteria: logical soundness, completeness, accuracy, acceptability, and practicality

  1. State-of-the-art report on radioactive waste disposal

    International Nuclear Information System (INIS)

    Larsson, A.

    1989-01-01

    In view of the considerable work required to develop repositories for radioactive waste, an extensive international co-operation has evolved within the area. The work has also engaged the IAEA to a great extent. The Agency has published a number of reports, covering different aspects of waste disposal. Following a recommendation by its Technical Review Committee on Underground Disposal (TRCUD) the Agency will publish a ''state-of-the-art'' report on radioactive waste disposal. The report is still in the preparation stage. In this article the principal subjects of the future report are discussed

  2. Blade root design a state of the art survey

    Energy Technology Data Exchange (ETDEWEB)

    Sandberg, O

    1988-06-01

    This report was conceived in the wake of recent blade root failures in several horizontal axis turbines. Ten blade root designs are presented. They are considered to represent the state of the art. The information was obtained partly from literature partly from a few important projects with little or no documentation. Suggestions are made how to proceed in the development of the bonded bolt type of root retention. Presently the conclusion is that this type of arrangement seems the most promising. Developments in this field should be closely monitored, however. For this type of very high cycle fatigue designs there is a need for two redundant design principles. (author).

  3. Intracytoplasmic sperm injection: state of the art in humans.

    Science.gov (United States)

    Palermo, G D; O'Neill, C L; Chow, S; Cheung, S; Parrella, A; Pereira, N; Rosenwaks, Z

    2017-12-01

    Among infertile couples, 25% involve both male and female factors, while male factor alone accounts for another 25% due to oligo-, astheno-, teratozoospermia, a combination of the three, or even a complete absence of sperm cells in the ejaculate and can lead to a poor prognosis even with the help of assisted reproductive technology (ART). Intracytoplasmic sperm injection (ICSI) has been with us now for a quarter of a century and in spite of the controversy generated since its inception, it remains in the forefront of the techniques utilized in ART. The development of ICSI in 1992 has drastically decreased the impact of male factor, resulting in millions of pregnancies worldwide for couples who, without ICSI, would have had little chance of having their own biological child. This review focuses on the state of the art of ICSI regarding utility of bioassays that evaluate male factor infertility beyond the standard semen analysis and describes the current application and advances in regard to ICSI, particularly the genetic and epigenetic characteristics of spermatozoa and their impact on reproductive outcome. © 2017 Society for Reproduction and Fertility.

  4. The State of the Art in Cold Forging Lubrication

    DEFF Research Database (Denmark)

    Bay, Niels

    1994-01-01

    The manufature of components in steel, aluminium and copper alloys by cold forging production has increased ever since the 1950's. Typical processes are forward rod extrusion and backward can extrusion, upsetting, ironing, tube extrusion and radial extrusion. The tribological conditions in cold...... forging are extremely severe due to large surface expansion and normal pressure in the tool/workpiece interface combined with elevated tool temperatures. Except for the more simple cold forging operations successful production therefore requires advanced lubrication systems. The present paper gives...... a detailed description of the state of art for lubricant systems for cold forging of C-steels and low alloy steels as well as aluminium alloys including all the basic operations such as cleaning of the slugs, application of eventual conversion coating and lubrication. As regards cold forging of steel...

  5. Geothermal well log interpretation state of the art. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Sanyal, S.K.; Wells, L.E.; Bickham, R.E.

    1980-01-01

    An in-depth study of the state of the art in Geothermal Well Log Interpretation has been made encompassing case histories, technical papers, computerized literature searches, and actual processing of geothermal wells from New Mexico, Idaho, and California. A classification scheme of geothermal reservoir types was defined which distinguishes fluid phase and temperature, lithology, geologic province, pore geometry, salinity, and fluid chemistry. Major deficiencies of Geothermal Well Log Interpretation are defined and discussed with recommendations of possible solutions or research for solutions. The Geothermal Well Log Interpretation study and report has concentrated primarily on Western US reservoirs. Geopressured geothermal reservoirs are not considered.

  6. Leadless Pacemakers: State of the Art and Future Perspectives.

    Science.gov (United States)

    Della Rocca, Domenico G; Gianni, Carola; Di Biase, Luigi; Natale, Andrea; Al-Ahmad, Amin

    2018-03-01

    Leadless pacemaker therapy is a new technology that aims at avoiding lead- and pocket-related complications of conventional transvenous and epicardial pacing. To date, 2 self-contained leadless pacemakers for right ventricular pacing have been clinically available: the Nanostim Leadless Pacemaker System and the Micra Transcatheter Pacing System. Additionally, a new multicomponent leadless pacemaker for endocardial left ventricular pacing has been proposed as an alternative choice for cardiac resynchronization therapy. In this review, we describe the state of the art of leadless pacing and compare the currently available devices with traditional transvenous leadless pacemakers. Copyright © 2017 Elsevier Inc. All rights reserved.

  7. [State of the art diagnostic criteria of severe periodontitis].

    Science.gov (United States)

    Ouyang, X Y

    2017-02-09

    Periodontitis could be categorized as mild, moderate, and severe according to the severity of the disease. This categorizing system could also be used together with other classification systems. The present article introduced the status about the case definition of severe periodontitis, including the standard of case definitions for surveillance of periodontitis reported by the Centers for Disease Control and Prevention (CDC) in partnership with the American Academy of Periodontology (AAP) and the consensus report on the definition of periodontitis case for use in risk factor research by Europe workshop. A consensus on the state of the art definition of severe periodontitis for use in clinical work was gained base on the expertise of Chinese Society of Periodontology, Chinese Association of Stomatology. The background of this consensus and the significance of the criteria for the case definition were discussed.

  8. The State of the Art Ten Years After a State of the Art

    DEFF Research Database (Denmark)

    Sturm, Bob L.

    2014-01-01

    A decade has passed since the first review of research on a ``flagship application" of music information retrieval (MIR): the problem of music genre recognition (MGR). During this time, about 500 works addressing MGR have been published, and at least 10 campaigns have been run to evaluate MGR sys......, the problems of validity in evaluation also affect research in music emotion recognition and autotagging. We conclude by discussing the implications of our work for MGR and MIR in the next ten years....

  9. State of the art and prospects of nuclear power development

    International Nuclear Information System (INIS)

    Egorov, Yu.V.; Glushenkova, S.Z.

    1984-01-01

    State of the art and prospects of nuclear power development abroad except the COMECON countries and Yugoslavia, are considered. Both average electric power of power units and load factor (LF) are shown to increase. Data on both the total generating capacity and nuclear power generation in certain countries are given. The number of commissioned NPPs in the USA decreases but terms of their construction and licensing are reduced, program of fast breeder reactor construction is being realized, prohibition of nuclear fuel reprocessing in cancelled. France came to the second place in the world as regards the operating NPPs. The nuclear power generation in Japan makes up 13% of the total generating capacity in the country. The LF of the Japan NPPs with BWR and PWR in 1982 made up 70.7 and 69.8%, respectively. A higher reliability of NPPs, decrease in the time for periodical inspections and prolongation of the operating cycle have promoted an increase in the LF

  10. State-of-the-art of biodegradable composite materials

    International Nuclear Information System (INIS)

    Baley, Ch.; Grohens, Y.; Pillin, I.

    2004-01-01

    Nowadays, the market demand for environment friendly materials is in strong growth. The biodegradable composites (biodegradable fibres and polymers) mainly extracted from renewable resources will be a major contributor to the production of new industrial high performance products partially solving the problem of waste management. At the end of the lifetime, a structural bio-composite could be be crushed and recycled through a controlled industrial composting process. This the state-of-the-art report focuses on the biopolymers the vegetable fibres properties, the mechanisms of biodegradation and the examples of biodegradable composites. Eco-design of new products requires these new materials for which a life cycle analysis is nevertheless necessary to validate their environmental benefits. (authors)

  11. Bidirectional Texture Function Modeling: State of the Art Survey

    Czech Academy of Sciences Publication Activity Database

    Filip, Jiří; Haindl, Michal

    2009-01-01

    Roč. 31, č. 11 (2009), s. 1921-1940 ISSN 0162-8828 R&D Projects: GA MŠk 1M0572; GA ČR GA102/08/0593; GA AV ČR 1ET400750407 Grant - others:EC Marie Curie(BE) 41358; GA MŠk(CZ) 2C06019 Institutional research plan: CEZ:AV0Z10750506 Keywords : BTF * surface texture * 3D texture Subject RIV: BD - Theory of Information Impact factor: 4.378, year: 2009 http://library.utia.cas.cz/separaty/2009/RO/filip-bidirectional texture function modeling state of the art survey.pdf

  12. Modular robotics overview of the 'state of the art'

    International Nuclear Information System (INIS)

    Kress, R.L.; Jansen, J.F.; Hamel, W.R.

    1996-08-01

    The design of a robotic arm processing modular components and reconfigurable links is the general goal of a modular robotics development program. The impetus behind the pursuit of modular design is the remote engineering paradigm of improved reliability and availability provided by the ability to remotely maintain and repair a manipulator operating in a hazardous environment by removing and replacing worn or failed modules. Failed components can service off- line and away from hazardous conditions. The desire to reconfigure an arm to perform different tasks is also an important driver for the development of a modular robotic manipulator. In order to bring to fruition a truly modular manipulator, an array of technical challenges must be overcome. These range from basic mechanical and electrical design considerations such as desired kinematics, actuator types, and signal and transmission types and routings, through controls issues such as the need for control algorithms capable of stable free space and contact control, to computer and sensor design issues like consideration of the use of embedded processors and redundant sensors. This report presents a brief overview of the state of the art of technical issues relevant of modular robotic arm design. The focus is on breadth of coverage, rather than depth, in order to provide a reference frame for future development

  13. Analysis of Respiratory Sounds: State of the Art

    Directory of Open Access Journals (Sweden)

    Sandra Reichert

    2008-01-01

    Full Text Available Objective This paper describes state of the art, scientific publications and ongoing research related to the methods of analysis of respiratory sounds. Methods and material Review of the current medical and technological literature using Pubmed and personal experience. Results The study includes a description of the various techniques that are being used to collect auscultation sounds, a physical description of known pathologic sounds for which automatic detection tools were developed. Modern tools are based on artificial intelligence and on technics such as artificial neural networks, fuzzy systems, and genetic algorithms… Conclusion The next step will consist in finding new markers so as to increase the efficiency of decision aid algorithms and tools.

  14. Supplier selection problem: A state-of-the-art review

    Directory of Open Access Journals (Sweden)

    Nilesh R. Ware

    2012-08-01

    Full Text Available In the global competitiveness and growing market environment, “Actual competition is not between firms against firm, than supplier against supplier”. Globally in the fastest market development world gets closer and closer. Consumers prefer fast delivery, economical product, excellent service and high quality product with desired service level. For successful management of this supply chain, supplier considered as the base source for all processes. Therefore, an efficient supplier selection and evaluation process needs to be incorporate. The main purpose of this paper is to provide an extensive state-of-the-art literature review and critique of the studies related to various aspects of supplier selection problem over the past two decades. Research papers appearing in the reputed and leading international journals from 1991 to 2011 are gathered and analyzed. Primary focus is given on more than 200 published and unpublished works. It has been referred extensively to carry out state-of-the-art review for supplier selection problem. Finally, paper provides future perspective based on current research trends available in the published literature.

  15. State of the art in perceptual design of hearing aids

    Science.gov (United States)

    Edwards, Brent W.; van Tasell, Dianne J.

    2002-05-01

    Hearing aid capabilities have increased dramatically over the past six years, in large part due to the development of small, low-power digital signal processing chips suitable for hearing aid applications. As hearing aid signal processing capabilities increase, there will be new opportunities to apply perceptually based knowledge to technological development. Most hearing loss compensation techniques in today's hearing aids are based on simple estimates of audibility and loudness. As our understanding of the psychoacoustical and physiological characteristics of sensorineural hearing loss improves, the result should be improved design of hearing aids and fitting methods. The state of the art in hearing aids will be reviewed, including form factors, user requirements, and technology that improves speech intelligibility, sound quality, and functionality. General areas of auditory perception that remain unaddressed by current hearing aid technology will be discussed.

  16. Digital radiography of the chest: state of the art

    International Nuclear Information System (INIS)

    Souto, M.; Malagari, K.S.; Tucker, D.; Tahoces, P.G.; Correa, J.; Benakis, V.S.; Roussos, C.; Strigaris, K.A.; Vidal, J.J.; Barnes, G.T.; Fraser, R.G.

    1994-01-01

    Digital image acquisition possesses a number of advantages over conventional systems in radiographic examination of the chest, the most important of which is its greater dynamic range. In addition, once digital images are acquired, they can be processed by computer in ways that cannot be rivalled by conventional analog techniques. Finally, digital images can be stored, retrieved and transmitted to local or remote sites. Here the status of the different digital systems employed in chest radiology and commonly used image processing techniques are reviewed. Also discussed are the current clinical applications of integrating digital chest radiography with a picture archiving and communication system (PACS) along with the difficulties typically encountered. Studies with a variety of digital techniques have been carried out on several fronts. Computed radiography based on photostimulable phosphor (CR) has replaced screen-film imaging in certain applications (i.e. bedside imaging). However, CR has limitations, namely its poor X-ray utilisation efficiency at high X-ray tube voltages and sensitivity to scatter; therefore, it is not ideal for all applications. Recently, a dedicated digital chest unit with excellent X-ray utilisation efficiency at high X-ray tube potentials has been introduced. On the basis of the state-of-the-art capabilities and research during the past decade, recommendations are made regarding the most desirable equipment specifications for dedicated and bedside digital chest radiography. (orig.)

  17. Antiphospholipid Syndrome during pregnancy: the state of the art

    Science.gov (United States)

    Di Prima, Fosca A. F.; Valenti, Oriana; Hyseni, Entela; Giorgio, Elsa; Faraci, Marianna; Renda, Eliana; De Domenico, Roberta; Monte, Santo

    2011-01-01

    Obstetric complications are the hallmark of antiphospholipid syndrome. Recurrent miscarriage, early delivery, oligohydramnios, prematurity, intrauterine growth restriction, fetal distress, fetal or neonatal thrombosis, pre-eclampsia/eclampsia, HELLP syndrome, arterial or venous thrombosis and placental insufficiency are the most severe APS-related complication for pregnant women. Antiphospholipid antibodies promote activation of endothelial cells, monocytes and platelets, causing an overproduction of tissue factor and thromboxane A2. Complement activation might have a central pathogenetic role. These factors, associated with the typical changes in the hemostatic system during normal pregnancy, result in a hypercoagulable state. This is responsible of thrombosis that is presumed to provoke many of the pregnancy complications associated with APS. Obstetric care is based on combined medical-obstetric high-risk management and treatment with the association between aspirin and heparin. This review aims to deter- mine the current state of the art of APS by investigating the knowledge achievements of recent years, to provide the most appropriate diagnostic and therapeutic management for pregnant women suffering from this syndrome. PMID:22439075

  18. As pesquisas denominadas "estado da arte" Research called "state of the art"

    Directory of Open Access Journals (Sweden)

    Norma Sandra de Almeida Ferreira

    2002-08-01

    Full Text Available Nos últimos quinze anos, no Brasil e em outros países, tem se produzido um conjunto significativo de pesquisas conhecidas pela denominação "estado da arte" ou "estado do conhecimento". Definidas como de caráter bibliográfico, elas parecem trazer em comum o desafio de mapear e de discutir uma certa produção acadêmica em diferentes campos do conhecimento, tentando responder que aspectos e dimensões vêm sendo destacados e privilegiados em diferentes épocas e lugares, de que formas e em que condições têm sido produzidas certas dissertações de mestrado, teses de doutorado, publicações em periódicos e comunicações em anais de congressos e de seminários. Neste artigo levanto e tento responder as seguintes questões: seria possível fazer um esforço de interrogar a história a produção acadêmica sobre determinada área do conhecimento, optando por ler apenas dados bibliográficos e resumos dos trabalhos? O que significa ler esse lugar (catálogos, instituição de divulgação dos trabalhos, tomando-o como fonte documental para um mapeamento da produção acadêmica, em pesquisas denominadas "estado da arte"?These last fifteen years, Brazil and other countries have seen the production of a significant set of research, known as "state of the art" or "state of knowledge". Defined as having a bibliographic feature, they seem to share the challenge of mapping and discussing a certain academic production in different fields of knowledge. They try to show which aspects and dimensions have been highlighted and privileged at different times and places. They also pinpoint how and in what conditions certain kinds of master's degree thesis and doctor's degree dissertations, publications in periodicals and communications in annals of congress and seminary were produced. In this article, I pose and try to answer the following questions: Is it worth making the effort of interrogating the history of the academic production about a given area

  19. Virtual microscopy and digital cytology: state of the art.

    Science.gov (United States)

    Giansanti, Daniele; Grigioni, Mauro; D'Avenio, Giuseppe; Morelli, Sandra; Maccioni, Giovanni; Bondi, Arrigo; Giovagnoli, Maria Rosaria

    2010-01-01

    The paper approaches a new technological scenario relevant for the introduction of the digital cytology (D-CYT) in the health service. A detailed analysis of the state of the art on the status of the introduction of D-CYT in the hospital and more in general in the dispersed territory has been conducted. The analysis was conducted in a form of review and was arranged into two parts: the first part focused on the technological tools needed to carry out a successful service (client server architectures, e-learning, quality assurance issues); the second part focused on issues oriented to help the introduction and evaluation of the technology (specific training in D-CYT, health technology assessment in-routine application, data format standards and picture archiving computerized systems (PACS) implementation, image quality assessment, strategies of navigation, 3D-virtual-reality potentialities). The work enlightens future scenarios of actions relevant for the introduction of the technology.

  20. Virtual microscopy and digital cytology: state of the art

    Directory of Open Access Journals (Sweden)

    Daniele Giansanti

    2010-06-01

    Full Text Available The paper approaches a new technological scenario relevant for the introduction of the digital cytology (D-CYT in the health service. A detailed analysis of the state of the art on the status of the introduction of D-CYT in the hospital and more in general in the dispersed territory has been conducted. The analysis was conducted in a form of review and was arranged into two parts: the first part focused on the technological tools needed to carry out a successful service (client server architectures, e-learning, quality assurance issues; the second part focused on issues oriented to help the introduction and evaluation of the technology (specific training in D-CYT, health technology assessment in-routine application, data format standards and picture archiving computerized systems (PACS implementation, image quality assessment, strategies of navigation, 3D-virtual-reality potentialities. The work enlightens future scenarios of actions relevant for the introduction of the technology.

  1. State-of-the-art Review : Vol. 1. State-of-the-art Report

    DEFF Research Database (Denmark)

    Andresen, Inger; Haghighat, Fariborz; Heiselberg, Per

    Energy use for room heating, cooling and ventilation accounts for more than one third of the total, primary energy demand in the industrialised countries, and is in this way a major polluter of the environment. To successfully achieve the targets set out in the Kyoto protocols it is necessary...

  2. MRI Sequences in Head & Neck Radiology - State of the Art.

    Science.gov (United States)

    Widmann, Gerlig; Henninger, Benjamin; Kremser, Christian; Jaschke, Werner

    2017-05-01

    Background  Magnetic resonance imaging (MRI) has become an essential imaging modality for the evaluation of head & neck pathologies. However, the diagnostic power of MRI is strongly related to the appropriate selection and interpretation of imaging protocols and sequences. The aim of this article is to review state-of-the-art sequences for the clinical routine in head & neck MRI and to describe the evidence for which medical question these sequences and techniques are useful. Method  Literature review of state-of-the-art sequences in head & neck MRI. Results and Conclusion  Basic sequences (T1w, T2w, T1wC+) and fat suppression techniques (TIRM/STIR, Dixon, Spectral Fat sat) are important tools in the diagnostic workup of inflammation, congenital lesions and tumors including staging. Additional sequences (SSFP (CISS, FIESTA), SPACE, VISTA, 3D-FLAIR) are used for pathologies of the cranial nerves, labyrinth and evaluation of endolymphatic hydrops in Menière's disease. Vessel and perfusion sequences (3D-TOF, TWIST/TRICKS angiography, DCE) are used in vascular contact syndromes, vascular malformations and analysis of microvascular parameters of tissue perfusion. Diffusion-weighted imaging (EPI-DWI, non-EPI-DWI, RESOLVE) is helpful in cholesteatoma imaging, estimation of malignancy, and evaluation of treatment response and posttreatment recurrence in head & neck cancer. Understanding of MRI sequences and close collaboration with referring physicians improves the diagnostic confidence of MRI in the daily routine and drives further research in this fascinating image modality. Key Points:   · Understanding of MRI sequences is essential for the correct and reliable interpretation of MRI findings.. · MRI protocols have to be carefully selected based on relevant clinical information.. · Close collaboration with referring physicians improves the output obtained from the diagnostic possibilities of MRI.. Citation Format · Widmann G, Henninger B, Kremser C et

  3. State of the art report on aging reliability analysis

    International Nuclear Information System (INIS)

    Choi, Sun Yeong; Yang, Joon Eon; Han, Sang Hoon; Ha, Jae Joo

    2002-03-01

    The goal of this report is to describe the state of the art on aging analysis methods to calculate the effects of component aging quantitatively. In this report, we described some aging analysis methods which calculate the increase of Core Damage Frequency (CDF) due to aging by including the influence of aging into PSA. We also described several research topics required for aging analysis for components of domestic NPPs. We have described a statistical model and reliability physics model which calculate the effect of aging quantitatively by using PSA method. It is expected that the practical use of the reliability-physics model will be increased though the process with the reliability-physics model is more complicated than statistical model

  4. State of the art metrics for aspect oriented programming

    Science.gov (United States)

    Ghareb, Mazen Ismaeel; Allen, Gary

    2018-04-01

    The quality evaluation of software, e.g., defect measurement, gains significance with higher use of software applications. Metric measurements are considered as the primary indicator of imperfection prediction and software maintenance in various empirical studies of software products. However, there is no agreement on which metrics are compelling quality indicators for novel development approaches such as Aspect Oriented Programming (AOP). AOP intends to enhance programming quality, by providing new and novel constructs for the development of systems, for example, point cuts, advice and inter-type relationships. Hence, it is not evident if quality pointers for AOP can be derived from direct expansions of traditional OO measurements. Then again, investigations of AOP do regularly depend on established coupling measurements. Notwithstanding the late reception of AOP in empirical studies, coupling measurements have been adopted as useful markers of flaw inclination in this context. In this paper we will investigate the state of the art metrics for measurement of Aspect Oriented systems development.

  5. Vertebroplasty - state of the art; Vertebroplastie - ''state of the art''

    Energy Technology Data Exchange (ETDEWEB)

    Wilhelm, K. [Akademisches Lehrkrankenhaus der Rheinischen Friedrich-Wilhelms-Universitaet Bonn, Radiologie und Nuklearmedizin, Johanniter-Krankenhaus - Johanniter GmbH, Bonn (Germany)

    2015-10-15

    Percutaneous vertebroplasty (PVP) using PMMA (polymethyl methacrylate) was first described in 1987 by Gallibert and Deramond for the treatment of vertebral body instability in patients with aggressive forms of vertebral hemangioma. Other types of painful osteolytic bone lesions, such as osteoporotic vertebral fractures and vertebral metastasis are in the meantime more commonly treated using this method. Within the last few years, this technique has become widely accepted and it is proposed for osteolytic bone lesions in areas that are more difficult to approach surgically, e.g., the pelvis and sacrum. Rapid pain relief and resulting stability have conferred an important role upon osteoplasty especially in palliative tumor-treatment for patients with shortened expected life spans. In addition, combined treatment of painful osteolytic metastases with image-guided thermoablation and percutaneous cement injection has been shown to be a safe palliative modality in the therapy of nonresectable tumors. (orig.) [German] Die Vertebroplastie ist ein minimal-invasives Verfahren, bei dem unter Durchleuchtung oder im CT Knochenzement mithilfe einer Hohlnadel in einen schmerzhaften Wirbelkoerper eingebracht wird. Die Technik wurde initial zur Behandlung aggressiver Wirbelkoerperhaemangiome beschrieben. Inzwischen stellen andere schmerzhafte Wirbelkoerperprozesse, vornehmlich osteolytische Metastasen sowie osteoporotische Wirbelkoerperfrakturen die haeufigsten Indikationen zur Durchfuehrung einer Vertebroplastie dar. Methode und Technik der Zementapplikation werden zwischenzeitlich erfolgreich auch bei ausserhalb der Wirbelsaeule bestehenden gutartigen Pathologien, z. B. bei Ermuedungsfrakturen des Os sacrum in Form der Sakroplastie sowie insbesondere schmerzhaften, metastatisch-osteolytischen Befunden als palliative Therapiemassnahme (Osteoplastie) eingesetzt. Im Rahmen palliativer Therapiekonzepte wird die Vertebroplastie in der Radiologie zunehmend in Kombination mit

  6. Stored energy calculation: the state of the art

    International Nuclear Information System (INIS)

    Cunningham, M.E.; Lanning, D.D.; Olsen, A.R.; Williford, R.E.; Hann, C.R.

    1978-05-01

    The report is the result of an investigation to determine the current state of the art of fuel temperature, gap conductance, and stored energy calculations. Major emphasis was placed on the propagation of input and model uncertainties. To support this study a comparison was made to the observed variability of experimental data for fuel centerline temperature and gap conductance values. The uncertainty analysis was performed by identifying major thermal models and collecting them into an abstract of a thermal performance code. Uncertainties in the calculations were determined using the method of propagation of uncertainties with a first order Taylor series approximation to the nonlinear functions. Output uncertainty results are presented for the beginning of fuel life, the end of life, and throughout a typical power history. Also presented is an influence and importance analysis for the input parameters. It is concluded that the relative uncertainty in stored energy is approximately +-20 percent at beginning of fuel life, and increases to +-25 to 40 percent contact. The foregoing are 3 sigma (99.9 percent) confidence intervals. The most important contributors to stored energy uncertainty are linear heat rating and fuel thermal conductivity

  7. State of the art in marketing hospital foodservice departments.

    Science.gov (United States)

    Pickens, C W; Shanklin, C W

    1985-11-01

    The purposes of this study were to identify the state of the art relative to the utilization of marketing techniques within hospital foodservice departments throughout the United States and to determine whether any relationships existed between the degree of utilization of marketing techniques and selected demographic characteristics of the foodservice administrators and/or operations. A validated questionnaire was mailed to 600 randomly selected hospital foodservice administrators requesting information related to marketing in their facilities. Forty-five percent of the questionnaires were returned and analyzed for frequency of response and significant relationship between variables. Chi-square was used for nominal data and Spearman rho for ranked data. Approximately 73% of the foodservice administrators stated that marketing was extremely important in the success of a hospital foodservice department. Respondents (79%) further indicated that marketing had become more important in their departments in the past 2 years. Departmental records, professional journals, foodservice suppliers, observation, and surveys were the sources most often used to obtain marketing data, a responsibility generally assumed by the foodservice director (86.2%). Merchandising, public relations, and word-of-mouth reputation were regarded as the most important aspects of marketing. Increased sales, participation, good will, departmental recognition, and employee satisfaction were used most frequently to evaluate the success of implemented marketing techniques. Marketing audits as a means of evaluating the success of marketing were used to a limited extent by the respondents.

  8. Pattern Recognition and Natural Language Processing: State of the Art

    Directory of Open Access Journals (Sweden)

    Mirjana Kocaleva

    2016-05-01

    Full Text Available Development of information technologies is growing steadily. With the latest software technologies development and application of the methods of artificial intelligence and machine learning intelligence embededs in computers, the expectations are that in near future computers will be able to solve problems themselves like people do. Artificial intelligence emulates human behavior on computers. Rather than executing instructions one by one, as theyare programmed, machine learning employs prior experience/data that is used in the process of system’s training. In this state of the art paper, common methods in AI, such as machine learning, pattern recognition and the natural language processing (NLP are discussed. Also are given standard architecture of NLP processing system and the level thatisneeded for understanding NLP. Lastly the statistical NLP processing and multi-word expressions are described.

  9. Big-hole drilling - the state of the art

    International Nuclear Information System (INIS)

    Lackey, M.D.

    1983-01-01

    The art of big-hole drilling has been in a continual state of evolution at the Nevada Test Site since the start of underground testing in 1961. Emplacement holes for nuclear devices are still being drilled by the rotary-drilling process, but almost all the hardware and systems have undergone many changes during the intervening years. The current design of bits, cutters, and other big-hole-drilling hardware results from contributions of manufacturers and Test Site personnel. The dual-string, air-lift, reverse-circulation system was developed at the Test Site. Necessity was really the Mother of this invention, but this circulation system is worthy of consideration under almost any condition. Drill rigs for big-hole drilling are usually adaptations of large oil-well drill rigs with minor modifications required to handle the big bits and drilling assemblies. Steel remains the favorite shaft lining material, but a lot of thought is being given to concrete linings, especially precast concrete

  10. State of the art in crystal oscillators - Present and future

    Science.gov (United States)

    Rosati, V. J.; Filler, R. L.; Schodowski, S. S.; Vig, J. R.

    It is pointed out that most military communication, navigation, surveillance and IFF systems which are currently under development require stable oscillators for frequency control and/or timing. Examples of such systems are the Single Channel Ground and Airborne Radio System (SINCGARS), MILSTAR, the Global Positioning System (GPS), the Combat Identification System (CIS), and several radar systems. In 1981, a survey and evaluation program was initiated with the aim to determine the state-of-the-art of both TCXOs (temperature compensated crystal oscillators) and OCXOs (oven controlled crystal oscillators). This program is continuing. The results obtained to date are considered because they can provide useful guidance to system users on the availability of stable oscillators.

  11. Subliminal Priming—State of the Art and Future Perspectives

    Directory of Open Access Journals (Sweden)

    Mohamed Elgendi

    2018-05-01

    Full Text Available The influence of subliminal priming (behavior outside of awareness in humans is an interesting phenomenon and its understanding is crucial as it can impact behavior, choices, and actions. Given this, research about the impact of priming continues to be an area of investigative interest, and this paper provides a technical overview of research design strengths and issues in subliminal priming research. Efficient experiments and protocols, as well as associated electroencephalographic and eye movement data analyses, are discussed in detail. We highlight the strengths and weaknesses of different priming experiments that have measured affective (emotional and cognitive responses. Finally, very recent approaches and findings are described to summarize and emphasize state-of-the-art methods and potential future directions in research marketing and other commercial applications.

  12. State of the Art in Pediatric Lung Transplantation.

    Science.gov (United States)

    Lancaster, Timothy S; Eghtesady, Pirooz

    2018-04-24

    Pediatric lung transplantation is a highly specialized therapy for end stage pulmonary disease in children, performed in only a handful of transplant centers around the world. Advancement in the field has been made on many fronts in recent years, including in public policy and organ allocation strategies, donor selection and management, emerging technologies for donor lung rehabilitation and bridge-to-transplant support of listed candidates, and ongoing refinement of surgical techniques. Despite this progress, children continue to suffer discrepant waitlist mortality and longer waiting times than their adult counterparts, and face special challenges of donor availability and size matching. Here we review the current state of the art in pediatric lung transplantation, reviewing progress made to date and further opportunities to improve care for this unique group of patients. Copyright © 2018 Elsevier Inc. All rights reserved.

  13. State of the Art: Saliva-Hormonanalyse // State of the art: Saliva analysis

    Directory of Open Access Journals (Sweden)

    Obermayer-Pietsch B

    2017-01-01

    Full Text Available Saliva analyses are widely used for hormone measurements, but also for drug and therapy monitoring, periodontal inflammation and human, viral or microbial nucleic acid (DNA detection. In this review, we focus on preanalytics, and measurement techniques. Clinical applications of steroid hormone analyses are presented with regard to practical use. p bKurzfassung: /bSpeichelanalysen können Hormone, aber auch Drogen- und Medikamenten-Monitoring, parodontale Entzündungsparameter und humane, virale oder mikrobielle Nukleinsäuren (DNA umfassen. In dieser Übersichtsarbeit wird auf Präanalytik, Nachweis-Techniken und Beispiele u.a. aus der Steroidanalyse eingegangen, die derzeit am weitesten entwickelt ist und vielerorts bereits Eingang in die medizinische Routine findet.

  14. Electric automation history and state of the art; Historia da automacao eletrica e estado da arte

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, M.F. [Itaipu Binacional, Foz do Iguacu, PR (Brazil). Div. de Engenharia Eletronica e Sistemas de Controle], E-mail: mendes@ieee.org; Jardini, J.A. [Universidade de Sao Paulo (PEA/EP/USP), SP (Brazil). Escola Politecnica. Dept. de Engenharia de Energia e Automacao Eletricas], E-mail: jardini@pea.usp.br

    2009-07-01

    The article summarizes the history of electric systems automation, used in hydroelectric power plants, since the rise to the present day. Technologies are presented employed at various times, developments, the difference and the reasons for evolution. The emphasis is on today's modern systems technology, covering: communication, standardization, hardware, software, architecture, maintenance, operation and challenges. This work pretend to give subsidies for the design and implementation of automation systems electricity using state of the art. The scope are the new plants as well as those being modernized. Knowledge of history is important to investigate, to plan and evaluate the costs and benefits of automation systems for new electric plants and those that are undergoing processes technological upgrading.

  15. The backstroke swimming start: state of the art.

    Science.gov (United States)

    de Jesus, Karla; de Jesus, Kelly; Fernandes, Ricardo J; Vilas-Boas, João Paulo; Sanders, Ross

    2014-09-29

    As sprint swimming events can be decided by margins as small as .01 s, thus, an effective start is essential. This study reviews and discusses the 'state of the art' literature regarding backstroke start biomechanics from 23 documents. These included two swimming specific publications, eight peer-reviewed journal articles, three from the Biomechanics and Medicine in Swimming Congress series, eight from the International Society of Biomechanics in Sports Conference Proceedings, one from a Biomechanics Congress and one academic (PhD) thesis. The studies had diverse aims, including swimmers' proficiency levels and data collection settings. There was no single consensus for defining phase descriptions; and kinematics, kinetics and EMG approaches were implemented in laboratory settings. However, researchers face great challenges in improving methods of quantifying valid, reliable and accurate data between laboratory and competition conditions. For example, starting time was defined from the starting signal to distances as disparate as ∼5 m to 22.86 m in several studies. Due to recent rule changes, some of the research outcomes now refer to obsolete backstroke start techniques, and only a few studies considered the actual international rules. This literature review indicated that further research is required, in both laboratory and competition settings focusing on the combined influences of the current rules and block configuration on backstroke starting performances.

  16. Management of infected pancreatic necrosis: state of the art

    Directory of Open Access Journals (Sweden)

    Roberto Rasslan

    Full Text Available ABSTRACT Pancreatic necrosis occurs in 15% of acute pancreatitis. The presence of infection is the most important factor in the evolution of pancreatitis. The diagnosis of infection is still challenging. Mortality in infected necrosis is 20%; in the presence of organic dysfunction, mortality reaches 60%. In the last three decades, there has been a real revolution in the treatment of infected pancreatic necrosis. However, the challenges persist and there are many unsolved questions: antibiotic treatment alone, tomography-guided percutaneous drainage, endoscopic drainage, video-assisted extraperitoneal debridement, extraperitoneal access, open necrosectomy? A step up approach has been proposed, beginning with less invasive procedures and reserving the operative intervention for patients in which the previous procedure did not solve the problem definitively. Indication and timing of the intervention should be determined by the clinical course. Ideally, the intervention should be done only after the fourth week of evolution, when it is observed a better delimitation of necrosis. Treatment should be individualized. There is no procedure that should be the first and best option for all patients. The objective of this work is to critically review the current state of the art of the treatment of infected pancreatic necrosis.

  17. Processing emotional body expressions: state-of-the-art.

    Science.gov (United States)

    Enea, Violeta; Iancu, Sorina

    2016-10-01

    Processing emotional body expressions has become recently an important topic in affective and social neuroscience along with the investigation of facial expressions. The objective of the study is to review the literature on emotional body expressions in order to discuss the current state of knowledge on this topic and identify directions for future research. The following electronic databases were searched: PsychINFO, Ebsco, ERIC, ProQuest, Sagepub, and SCOPUS using terms such as "body," "bodily expression," "body perception," "emotions," "posture," "body recognition" and combinations of them. The synthesis revealed several research questions that were addressed in neuroimaging, electrophysiological and behavioral studies. Among them, one important question targeted the neural mechanisms of emotional processing of body expressions to specific subsections regarding the time course for the integration of emotional signals from face and body, as well as the role of context in the perception of emotional signals. Processing bodily expression of emotion is similar to processing facial expressions, and the holistic processing is extended to the whole person. The current state-of-the-art in processing emotional body expressions may lead to a better understanding of the underlying neural mechanisms of social behavior. At the end of the review, suggestions for future research directions are presented.

  18. Clinical reappraisal and state of the art of nephropexy.

    Science.gov (United States)

    Mogorovich, Andrea; Selli, Cesare; De Maria, Maurizio; Manassero, Francesca; Durante, Jacopo; Urbani, Lucio

    2018-04-01

    The diffusion of minimally invasive techniques for renal surgery has prompted a renewed interest in nephropexy which is indicated to prevent nephroptosis in symptomatic patients and to mobilize the upper ureter downward in order to bridge a ureteral defect. Recent publications have been reviewed to present the state of the art of the diagnosis and management of these two challenging conditions and to try to foresee the next steps. The evaluation of patients with mobile kidney can be made relying on diagnostic criteria such as ultrasound with color Doppler and measurement of resistive index, conventional upright X-ray frames after a supine uro-computerized tomography scan and both static and dynamic nuclear medicine scans, always with evaluation in the sitting or erect position. Laparoscopic nephropexy emerges as the current treatment option combining both objectively controlled repositioning of the kidney and resolution of symptoms with minimal invasiveness, low morbidity, and short hospital stay. The use of robotics is presently limited by its higher cost, but may increase in the future. Downward renal mobilization and nephropexy is a safe and versatile technique which has been adopted as a unique strategy or more often in combination with other surgical maneuvers in order to cope with complex ureteral reconstruction.

  19. Assisted Reproduction Techniques (Art): The State of the Art in Nigeria

    African Journals Online (AJOL)

    Background: Infertility has become a social stigma in our environment because of the erroneous belief that a childless marriage is a failed marriage. This has placed a lot of marriages under pressure. Therefore any solution to infertility is a welcome relief. This is where Assisted Reproduction Techniques (ART) belongs.

  20. A State-of-the-Art Review of Cloud Forensics

    Directory of Open Access Journals (Sweden)

    Sameera Abdulrahman Almulla

    2014-12-01

    Full Text Available Cloud computing and digital forensics are emerging fields of technology. Unlike traditional digital forensics where the target environment can be almost completely acquired, isolated and can be under the investigators control; in cloud environments, the distribution of computation and storage poses unique and complex challenges to the investigators.Recently, the term "cloud forensics" has an increasing presence in the field of digital forensics. In this state-of-the-art review, we included the most recent research efforts that used "cloud forensics" as a keyword and then classify the literature in to three dimensions, (1 survey-based, (2 technology-based and (3 forensics procedural-based.We discuss widely accepted international standard bodies and their efforts to cope with the current trend of cloud forensics. Our aim is not only to reference related work based on the discussed dimensions, but also to analyze them and generate a mind map that will help in identifying research gaps. Finally, we summarize existing digital forensics tools and, the available simulation environments that can be used for evidence acquisition, examination and cloud forensics test purposes.

  1. For What Purpose the Arts? An Analysis of the Mission Statements of Urban Arts High Schools in Canada and the United States

    Science.gov (United States)

    Gaztambide-Fernández, Rubén; Nicholls, Rachael; Arráiz-Matute, Alexandra

    2016-01-01

    While general arts programs have declined in many schools across the United States and Canada, the number of specialized art programs in public secondary schools has swelled since the 1980s. While this increase is often celebrated by arts educators, questions about the justification of specialized arts programs are rarely raised, and their value…

  2. Technology in precision viticulture: a state of the art review

    Directory of Open Access Journals (Sweden)

    Matese A

    2015-05-01

    Full Text Available Alessandro Matese,1 Salvatore Filippo Di Gennaro1,2 1Institute of Biometeorology, National Research Council (IBIMET-CNR, Florence, Italy; 2Department of Agricultural, Food and Environmental Sciences, University of Perugia, Perugia, Italy Abstract: Precision viticulture aims to maximize the oenological potential of vineyards. This is especially true in regions where the high quality standards of wine production justify the adoption of site-specific management practices to simultaneously increase both quality and yield. The introduction of new technologies for supporting vineyard management allows the efficiency and quality of production to be improved and, at the same time, reduces the environmental impact. The rapid evolution of information communication technologies and geographical science offers enormous potential for the development of optimized solutions for distributed information for precision viticulture. Recent technological developments have allowed useful tools to be elaborated that help in the monitoring and control of many aspects of vine growth. Precision viticulture thus seeks to exploit the widest range of available observations to describe the vineyard spatial variability with high resolution, and provide recommendations to improve management efficiency in terms of quality, production, and sustainability. This review presents a brief outline of state of the art of technologies in precision viticulture. It is divided in two sections, the first focusing on monitoring technologies such as geolocating and remote and proximal sensing; the second focuses on variable-rate technologies and the new agricultural robots. Keywords: remote sensing, proximal sensing, variable-rate technology, robot 

  3. State-of-the-art report on piping fracture mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Wilkowski, G.M.; Olson, R.J.; Scott, P.M. [Battelle, Columbus, OH (United States)

    1998-01-01

    This report is an in-depth summary of the state-of-the-art in nuclear piping fracture mechanics. It represents the culmination of 20 years of work done primarily in the US, but also attempts to include important aspects from other international efforts. Although the focus of this work was for the nuclear industry, the technology is also applicable in many cases to fossil plants, petrochemical/refinery plants, and the oil and gas industry. In compiling this detailed summary report, all of the equations and details of the analysis procedure or experimental results are not necessarily included. Rather, the report describes the important aspects and limitations, tells the reader where he can go for further information, and more importantly, describes the accuracy of the models. Nevertheless, the report still contains over 150 equations and over 400 references. The main sections of this report describe: (1) the evolution of piping fracture mechanics history relative to the developments of the nuclear industry, (2) technical developments in stress analyses, material property aspects, and fracture mechanics analyses, (3) unresolved issues and technically evolving areas, and (4) a summary of conclusions of major developments to date.

  4. State-of-the-art report on piping fracture mechanics

    International Nuclear Information System (INIS)

    Wilkowski, G.M.; Olson, R.J.; Scott, P.M.

    1998-01-01

    This report is an in-depth summary of the state-of-the-art in nuclear piping fracture mechanics. It represents the culmination of 20 years of work done primarily in the US, but also attempts to include important aspects from other international efforts. Although the focus of this work was for the nuclear industry, the technology is also applicable in many cases to fossil plants, petrochemical/refinery plants, and the oil and gas industry. In compiling this detailed summary report, all of the equations and details of the analysis procedure or experimental results are not necessarily included. Rather, the report describes the important aspects and limitations, tells the reader where he can go for further information, and more importantly, describes the accuracy of the models. Nevertheless, the report still contains over 150 equations and over 400 references. The main sections of this report describe: (1) the evolution of piping fracture mechanics history relative to the developments of the nuclear industry, (2) technical developments in stress analyses, material property aspects, and fracture mechanics analyses, (3) unresolved issues and technically evolving areas, and (4) a summary of conclusions of major developments to date

  5. State of the art on periphyton knowledge in Colombia

    International Nuclear Information System (INIS)

    Montoya Moreno, Yimmy; Aguirre R, Nestor

    2013-01-01

    Periphyton is a component of aquatic communities, composed by microbiota adhered to different substrates; plays a fundamental role in matter, energy and information transferences trough food webs and its study is important both from ecology, to understand ecosystems, as from environmental points of view, as periphyton is a good indicator of environmental processes and conditions, for instance water quality, in those ecosystems. Periphyton research is complex; even periphyton definition is still controversial. In addition to that, the variety of methodologies for comprehensive study, the diversity of peri phytic matrix architectures, the diversity of ecosystems and the absence of taxonomic schools in the country, are causing that few works are being published on the subject, which increases the value and importance of the work outlined in this review. The aim of this paper is to present the state of the art in research on periphyton in Colombia, analyzing different lines of research that has been developed and their progress. In order to do this, we examined 84 papers available to the authors. Most studies surveyed in this study (90%) correspond to the study of phycoperiphyton; the remaining 10% included both components of periphyton; one paper was dedicated exclusively to zooperiphyton. Only 10.5% of investigations (8 papers) have been dedicated to detailed taxonomic study; other publications study the structure and dynamics of the periphytic community.

  6. Wind power forecasting : state-of-the-art 2009.

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, C.; Bessa, R.; Miranda, V.; Botterud, A.; Wang, J.; Conzelmann, G.; Decision and Information Sciences; INESC Porto

    2009-11-20

    uncertainty in wind power and to more efficiently operate power systems with large wind power penetrations. Moreover, in a market environment, the wind power contribution to the generation portofolio becomes important in determining the daily and hourly prices, as variations in the estimated wind power will influence the clearing prices for both energy and operating reserves. With the increasing penetration of wind power, WPF is quickly becoming an important topic for the electric power industry. System operators (SOs), generating companies (GENCOs), and regulators all support efforts to develop better, more reliable and accurate forecasting models. Wind farm owners and operators also benefit from better wind power prediction to support competitive participation in electricity markets against more stable and dispatchable energy sources. In general, WPF can be used for a number of purposes, such as: generation and transmission maintenance planning, determination of operating reserve requirements, unit commitment, economic dispatch, energy storage optimization (e.g., pumped hydro storage), and energy trading. The objective of this report is to review and analyze state-of-the-art WPF models and their application to power systems operations. We first give a detailed description of the methodologies underlying state-of-the-art WPF models. We then look at how WPF can be integrated into power system operations, with specific focus on the unit commitment problem.

  7. Nanomedicine applications in women's health: state of the art.

    Science.gov (United States)

    Lloyd-Parry, Oliver; Downing, Charlotte; Aleisaei, Eisa; Jones, Celine; Coward, Kevin

    2018-01-01

    State-of-the-art applications of nanomedicine have the potential to revolutionize the diagnosis, prevention, and treatment of a range of conditions and diseases affecting women's health. In this review, we provide a synopsis of potential applications of nanomedicine in some of the most dominant fields of women's health: mental health, sexual health, reproductive medicine, oncology, menopause-related conditions and dementia. We explore published studies arising from in vitro and in vivo experiments, and clinical trials where available, to reveal novel and highly promising therapeutic applications of nanomedicine in these fields. For the first time, we summarize the growing body of evidence relating to the use of nanomaterials as experimental tools for the detection, prevention, and treatment of significant diseases and conditions across the life course of a cisgender woman, from puberty to menopause; revealing the far-reaching and desirable theoretical impact of nanomedicine across different medical disciplines. We also present an overview of potential concerns regarding the therapeutic applications of nanomedicine and the factors currently restricting the growth of applied nanomedicine.

  8. Desiccant cooling: State-of-the-art assessment

    Energy Technology Data Exchange (ETDEWEB)

    Pesaran, A.A.; Penney, T.R.; Czanderna, A.W.

    1992-10-01

    The objectives of this document are to present an overview of the work accomplished to date on desiccant cooling to provide assessment of the state of the art of desiccant cooling technology in the field of desiccant material dehumidifier components, desiccant systems, and models. The report also discusses the factors that affect the widespread acceptance of desiccant cooling technology. This report is organized as follows. First, a basic description and historical overview of desiccant cooling technology is provided. Then, the recent research and development (R D) program history (focusing on DOE's funded efforts) is discussed. The status of the technology elements (materials, components, systems) is discussed in detail and a preliminary study on the energy impact of desiccant technology is presented. R D needs for advancing the technology in the market are identified. The National Renewable Energy Laboratory's unique desiccant test facilities and their typical outputs are described briefly. Finally, the results of a comprehensive literature search on desiccant cooling are presented in a bibliography. The bibliography contains approximately 900 citations on desiccant cooling.

  9. Desiccant cooling: State-of-the-art assessment

    Energy Technology Data Exchange (ETDEWEB)

    Pesaran, A.A.; Penney, T.R.; Czanderna, A.W.

    1992-10-01

    The objectives of this document are to present an overview of the work accomplished to date on desiccant cooling to provide assessment of the state of the art of desiccant cooling technology in the field of desiccant material dehumidifier components, desiccant systems, and models. The report also discusses the factors that affect the widespread acceptance of desiccant cooling technology. This report is organized as follows. First, a basic description and historical overview of desiccant cooling technology is provided. Then, the recent research and development (R&D) program history (focusing on DOE`s funded efforts) is discussed. The status of the technology elements (materials, components, systems) is discussed in detail and a preliminary study on the energy impact of desiccant technology is presented. R&D needs for advancing the technology in the market are identified. The National Renewable Energy Laboratory`s unique desiccant test facilities and their typical outputs are described briefly. Finally, the results of a comprehensive literature search on desiccant cooling are presented in a bibliography. The bibliography contains approximately 900 citations on desiccant cooling.

  10. Aircraft wake vortices : a state-of-the-art review of the United States R&D program

    Science.gov (United States)

    1977-02-28

    The report summarizes the current state-of-the-art understanding : of the aircraft wake vortex phenomenon and the results of the United : States program to minimize the restrictions caused by aircraft wake : vortices in the terminal environment. The ...

  11. Egg Yolk Antibodies, State of the Art and Future Prospects.

    Science.gov (United States)

    Schade, Rüdiger; Hlinak, Andreas

    1996-01-01

    Immunization of chickens and extraction of antibodies from egg yolk belongs to the alternative methods since the animals suffering is reduced by non-invasive antibody-sampling. Also, the number of animals needed to produce a certain amount of antibody can be reduced since chickens produce a significant higher antibody quantity than rabbits. Despite its several advantages this technology (IgY-technology) is rather scarcely used. Traditional behavior as well as limited or no information at all may hamper a broader acceptance at present. However, significant arguments exist in chicken housing, the choice of appropriate IgY-extraction methods and a lack of information regarding the use of IgY-antibodies. This paper intends to give a short introduction in the IgY-technology, to briefly discuss the state of the art and to inform on recent developments and discussions in this field. The suitability of IgY for special fields of application (as a result of the structural differences between IgY and IgG) is emphasized (e.g. assays combining IgG and IgY, immunization of chickens against highly conserved anti-genes). In addition, it is stressed that the IgY-technology as an alternative method can particularly integrate requirements of animal protection (reduce, replace, refine), science (characteristics of avian immune system and resulting properties of IgY) and economy (amount of IgY produced from one chicken).

  12. State-of-the-Art Beta Detection and Dosimetry

    International Nuclear Information System (INIS)

    David M. Hamby

    2008-01-01

    The research funded by this NEER grant establishes the framework for a detailed understanding of the challenges in beta dosimetry, especially in the presence of a mixed radiation field. The work also stimulated the thinking of the research group which will lead to new concepts in digital signal processing to allow collection of detection signals and real-time analysis such that simultaneous beta and gamma spectroscopy can take place. The work described herein (with detail in the many publications that came out of this research) was conducted in a manner that provided dissertation and thesis topics for three students, one of whom was completely funded by this grant. The overall benefit of the work came in the form of a dramatic shift in signal processing that is normally conducted in analog pulse shape analysis. Analog signal processing was shown not to be feasible for this type of work; digital signal processing was a must. This, in turn, led the research team to a new understanding of pulse analysis, one in which expands the state-of-the-art in simultaneous beta and gamma spectroscopy with a single detector

  13. State-of-the-Art Beta Detection and Dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    David M. Hamby

    2008-08-15

    The research funded by this NEER grant establishes the framework for a detailed understanding of the challenges in beta dosimetry, especially in the presence of a mixed radiation field. The work also stimulated the thinking of the research group which will lead to new concepts in digital signal processing to allow collection of detection signals and real-time analysis such that simultaneous beta and gamma spectroscopy can take place. The work described herein (with detail in the many publications that came out of this research) was conducted in a manner that provided dissertation and thesis topics for three students, one of whom was completely funded by this grant. The overall benefit of the work came in the form of a dramatic shift in signal processing that is normally conducted in analog pulse shape analysis. Analog signal processing was shown not to be feasible for this type of work; digital signal processing was a must. This, in turn, led the research team to a new understanding of pulse analysis, one in which expands the state-of-the-art in simultaneous beta and gamma spectroscopy with a single detector.

  14. A state of the art on metallic fuel technology development

    International Nuclear Information System (INIS)

    Hwang, Woan; Kang, Hee Young; Nam, Cheol; Kim, Jong Oh

    1997-01-01

    Since worldwide interest turned toward ceramic fuels before the full potential of metallic fuel could be achieved in the late 1960's, the development of metallic fuels continued throughout the 1970's at ANL's experimental breeder reactor II (EBR-II) because EBR-II continued to be fueled with the metallic uranium-fissium alloy, U-5Fs. During this decade the performance limitations of metallic fuel were satisfactorily resolved resolved at EBR-II. The concept of the IFR developed at ANL since 1984. The technical feasibility had been demonstrated and the technology database had been established to support its practicality. One key features of the IFR is that the fuel is metallic, which brings pronounced benefits over oxide in improved inherent safety and lower processing costs. At the outset of the 1980's, it appeared that metallic fuels are recognized as a professed viable option with regard to safety, integral fuel cycle, waste minimization and deployment economics. This paper reviews the key advances in the last score and summarizes the state-of the art on metallic fuel technology development. (author). 29 refs., 1 tab

  15. A state of the art on metallic fuel technology development

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Woan; Kang, Hee Young; Nam, Cheol; Kim, Jong Oh [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-12-31

    Since worldwide interest turned toward ceramic fuels before the full potential of metallic fuel could be achieved in the late 1960`s, the development of metallic fuels continued throughout the 1970`s at ANL`s experimental breeder reactor II (EBR-II) because EBR-II continued to be fueled with the metallic uranium-fissium alloy, U-5Fs. During this decade the performance limitations of metallic fuel were satisfactorily resolved resolved at EBR-II. The concept of the IFR developed at ANL since 1984. The technical feasibility had been demonstrated and the technology database had been established to support its practicality. One key features of the IFR is that the fuel is metallic, which brings pronounced benefits over oxide in improved inherent safety and lower processing costs. At the outset of the 1980`s, it appeared that metallic fuels are recognized as a professed viable option with regard to safety, integral fuel cycle, waste minimization and deployment economics. This paper reviews the key advances in the last score and summarizes the state-of the art on metallic fuel technology development. (author). 29 refs., 1 tab.

  16. Discovery Mondays "State-of-the-art technologies for precision"

    CERN Multimedia

    2007-01-01

    Ceramic plate drilled with high precision in CERN’s workshop. The diameter of each hole is only 0.02 millimetres, comparable to the diameter of a hair.Scientists have to be infinitely precise to study the infinitely small. Thus, even though the LHC is the world’s largest accelerator, it has to be aligned to within a tenth of a millimetre. The detectors weigh several thousand tonnes but are capable of detecting the tiniest vibration of the Earth. Join us at the next Discovery Monday to find out about CERN’s state-of-the-art tools for achieving the degrees of resolution required in the field of particle physics. Don’t miss this opportunity to discover the world of precision! The event will be conducted in FrenchCome along to the Microcosm (Reception Building 33, Meyrin site) on Monday 5 November from 7.30 p.m. to 9.00 p.m. Entrance Free http://www.cern.ch/LundisDecouverte/

  17. Ecological effects assessment: requirements vs state-of-the-art

    International Nuclear Information System (INIS)

    McKenzie, D.H.; Thomas, J.M.; Eberhardt, L.L.

    1981-05-01

    Concerns for environmental quality, the ecologist's understanding of ecosystems, and the ability to quantitatively sample and evaluate hypotheses have contributed to current requirements and the state-of-the-art in ecological effects assessments in refard to nuclear power plants. The current cooling system approaches, data collection programs, and ecological effects assessments reflect these contributions. Over a decade of experience provides the basis for a timely review and evaluation of current proactice. The magnitude of economic and environmental resources being committed to cooling system alternatives mandates that the decision-making process result in as many optimal choices as possible. In addition, the resources being devoted to environmental data collection and integration provide considerable motivation for providing meaningful input to the decision-making process. It is maintained that the input should be as quantitative and as free from subjective content as is reasonably possible. An alternative viewpoint suggests that the past several decades of experience be considered but a first step, and the current task to be one of designing a second step

  18. State-of-the-art Model M-2 Maintenance System

    International Nuclear Information System (INIS)

    Herndon, J.N.; Martin, H.L.; Satterlee, P.E. Jr.; Jelatis, D.G.; Jennrich, C.E.

    1984-04-01

    The Model M-2 Maintenance System is part of an ongoing program within the Consolidated Fuel Reprocessing Program (CFRP) at Oak Ridge National Laboratory (ORNL) to improve remote manipulation technology for future nuclear fuel reprocessing and other remote applications. Techniques, equipment, and guidelines which can improve the efficiency of remote maintenance are being developed. The Model M-2 Maintenance System, installed in the Integrated Equipment Test (IET) Facility at ORNL, provides a complete, integrated remote maintenance system for the demonstration and development of remote maintenance techniques. The system comprises a pair of force-reflecting servomanipulator arms, television viewing, lighting, and auxiliary lifting capabilities, thereby allowing manlike maintenance operations to be executed remotely within the remote cell mockup area in the IET. The Model M-2 Maintenance System incorporates an upgraded version of the proven Central Research Laboratories' Model M servomanipulator. Included are state-of-the-art brushless dc servomotors for improved performance, remotely removable wrist assemblies, geared azimuth drive, and a distributed microprocessor-based digital control system. 5 references, 8 figures

  19. State-of-the-Art Prescriptive Criteria Weight Elicitation

    Directory of Open Access Journals (Sweden)

    Mona Riabacke

    2012-01-01

    Full Text Available Comparatively few of the vast amounts of decision analytical methods suggested have been widely spread in actual practice. Some approaches have nevertheless been more successful in this respect than others. Quantitative decision making has moved from the study of decision theory founded on a single criterion towards decision support for more realistic decision-making situations with multiple, often conflicting, criteria. Furthermore, the identified gap between normative and descriptive theories seems to suggest a shift to more prescriptive approaches. However, when decision analysis applications are used to aid prescriptive decision-making processes, additional demands are put on these applications to adapt to the users and the context. In particular, the issue of weight elicitation is crucial. There are several techniques for deriving criteria weights from preference statements. This is a cognitively demanding task, subject to different biases, and the elicited values can be heavily dependent on the method of assessment. There have been a number of methods suggested for assessing criteria weights, but these methods have properties which impact their applicability in practice. This paper provides a survey of state-of-the-art weight elicitation methods in a prescriptive setting.

  20. State of the Art: Embedding Security in Vehicles

    Directory of Open Access Journals (Sweden)

    Weimerskirch André

    2007-01-01

    Full Text Available For new automotive applications and services, information technology (IT has gained central importance. IT-related costs in car manufacturing are already high and they will increase dramatically in the future. Yet whereas safety and reliability have become a relatively well-established field, the protection of vehicular IT systems against systematic manipulation or intrusion has only recently started to emerge. Nevertheless, IT security is already the base of some vehicular applications such as immobilizers or digital tachographs. To securely enable future automotive applications and business models, IT security will be one of the central technologies for the next generation of vehicles. After a state-of-the-art overview of IT security in vehicles, we give a short introduction into cryptographic terminology and functionality. This contribution will then identify the need for automotive IT security while presenting typical attacks, resulting security objectives, and characteristic constraints within the automotive area. We will introduce core security technologies and relevant security mechanisms followed by a detailed description of critical vehicular applications, business models, and components relying on IT security. We conclude our contribution with a detailed statement about challenges and opportunities for the automotive IT community for embedding IT security in vehicles.

  1. State of the Art: Embedding Security in Vehicles

    Directory of Open Access Journals (Sweden)

    André Weimerskirch

    2007-06-01

    Full Text Available For new automotive applications and services, information technology (IT has gained central importance. IT-related costs in car manufacturing are already high and they will increase dramatically in the future. Yet whereas safety and reliability have become a relatively well-established field, the protection of vehicular IT systems against systematic manipulation or intrusion has only recently started to emerge. Nevertheless, IT security is already the base of some vehicular applications such as immobilizers or digital tachographs. To securely enable future automotive applications and business models, IT security will be one of the central technologies for the next generation of vehicles. After a state-of-the-art overview of IT security in vehicles, we give a short introduction into cryptographic terminology and functionality. This contribution will then identify the need for automotive IT security while presenting typical attacks, resulting security objectives, and characteristic constraints within the automotive area. We will introduce core security technologies and relevant security mechanisms followed by a detailed description of critical vehicular applications, business models, and components relying on IT security. We conclude our contribution with a detailed statement about challenges and opportunities for the automotive IT community for embedding IT security in vehicles.

  2. Biopesticides: state of the art and future opportunities.

    Science.gov (United States)

    Seiber, James N; Coats, Joel; Duke, Stephen O; Gross, Aaron D

    2014-12-03

    The use of biopesticides and related alternative management products is increasing. New tools, including semiochemicals and plant-incorporated protectants (PIPs), as well as botanical and microbially derived chemicals, are playing an increasing role in pest management, along with plant and animal genetics, biological control, cultural methods, and newer synthetics. The goal of this Perspective is to highlight promising new biopesticide research and development (R&D), based upon recently published work and that presented in the American Chemical Society (ACS) symposium "Biopesticides: State of the Art and Future Opportunities," as well as the authors' own perspectives. Although the focus is on biopesticides, included in this Perspective is progress with products exhibiting similar characteristics, namely those naturally occurring or derived from natural products. These are target specific, of low toxicity to nontarget organisms, reduced in persistence in the environment, and potentially usable in organic agriculture. Progress is being made, illustrated by the number of biopesticides and related products in the registration pipeline, yet major commercial opportunities exist for new bioherbicides and bionematicides, in part occasioned by the emergence of weeds resistant to glyphosate and the phase-out of methyl bromide. The emergence of entrepreneurial start-up companies, the U.S. Environmental Protection Agency (EPA) fast track for biopesticides, and the availability of funding for registration-related R&D for biorational pesticides through the U.S. IR-4 program provide incentives for biopesticide development, but an expanded effort is warranted both in the United States and worldwide to support this relatively nascent industry.

  3. Fabricating biomedical origami: a state-of-the-art review.

    Science.gov (United States)

    Johnson, Meredith; Chen, Yue; Hovet, Sierra; Xu, Sheng; Wood, Bradford; Ren, Hongliang; Tokuda, Junichi; Tse, Zion Tsz Ho

    2017-11-01

    Origami-based biomedical device design is an emerging technology due to its ability to be deployed from a minimal foldable pattern to a larger volume. This paper aims to review state-of-the-art origami structures applied in the medical device field. Publications and reports of origami structure related to medical device design from the past 10 years are reviewed and categorized according to engineering specifications, including the application field, fabrication material, size/volume, deployment method, manufacturability, and advantages. This paper presents an overview of the biomedical applications of devices based on origami structures, including disposable sterilization covers, cardiac catheterization, stent grafts, encapsulation and microsurgery, gastrointestinal microsurgery, laparoscopic surgical grippers, microgrippers, microfluidic devices, and drug delivery. Challenges in terms of materials and fabrication, assembly, modeling and computation design, and clinical adoptability are discussed at the end of this paper to provide guidance for future origami-based design in the medical device field. Concepts from origami can be used to design and develop novel medical devices. Origami-based medical device design is currently progressing, with researchers improving design methods, materials, fabrication techniques, and folding efficiency.

  4. Non-animal sensitization testing: state-of-the-art.

    Science.gov (United States)

    Vandebriel, Rob J; van Loveren, Henk

    2010-05-01

    Predictive tests to identify the sensitizing properties of chemicals are carried out using animals. In the European Union timelines for phasing out many standard animal tests were established for cosmetics. Following this policy, the new European Chemicals Legislation (REACH) favors alternative methods, if validated and appropriate. In this review the authors aim to provide a state-of-the art overview of alternative methods (in silico, in chemico, and in vitro) to identify contact and respiratory sensitizing capacity and in some occasions give a measure of potency. The past few years have seen major advances in QSAR (quantitative structure-activity relationship) models where especially mechanism-based models have great potential, peptide reactivity assays where multiple parameters can be measured simultaneously, providing a more complete reactivity profile, and cell-based assays. Several cell-based assays are in development, not only using different cell types, but also several specifically developed assays such as three-dimenionally (3D)-reconstituted skin models, an antioxidant response reporter assay, determination of signaling pathways, and gene profiling. Some of these assays show relatively high sensitivity and specificity for a large number of sensitizers and should enter validation (or are indeed entering this process). Integrating multiple assays in a decision tree or integrated testing system is a next step, but has yet to be developed. Adequate risk assessment, however, is likely to require significantly more time and efforts.

  5. IEC planning: eight state-of-the-art principles.

    Science.gov (United States)

    Middleton, J

    1983-12-01

    Considerable experience and research has been accumulated in the last 20 years on the ways in which information/education/communication (IEC) programs can be effectively designed, implemented, and evaluated. Possibly more effort has focused on population and family planning IEC than on any other sectoral program of development communication. Several principles have emerged which, taken together, define the state of the art in the field. These principles provide a framework of experience which can guide the development of comprehensive IEC programs. They include: policy and resource assessment; audience analysis; strategy design; message research and pretesting; participation and feedback; management; evaluation; and collaboration. The nature of the national policy base for population and family planning programs will determine the goals and approaches of the IEC program. Strong policies of limitation on popultion growth lead to equally strong and pervasive IEC efforts designed to directly affect contraceptive behavior. Assessment of existing policy is an essential aspect of the design of an effective IEC program. Policies establish the rationale and boundaries for action. Population and family planning programs are concerned with some of the most intimate human behavior. Consequently, structured and sensitive audience analysis has become an integral part of the design of IEC programs. The design of communication strategy requires clearly stated objectives. Principles of human learning are used to structure information appropriately. Message research and pretesting have become integral components of the strategy design process. Small scale research on specific objectives is necessary to establish the basis for message design. Audience participation and feedback in remaining phases of program development and implementation are important. The management of an IEC program requires a specific combination of planning, flexibility, and creativity. Evaluation of program

  6. Digital multicolor printing: state of the art and future challenges

    Science.gov (United States)

    Kipphan, Helmut

    1995-04-01

    During the last 5 years, digital techniques have become extremely important in the graphic arts industry. All sections in the production flow for producing multicolor printed products - prepress, printing and postpress - are influenced by digitalization, in an evolutionary and revolutionary way. New equipment and network techniques bring all the sections closer together. The focus is put on high-quality multicolor printing, together with high productivity. Conventional offset printing technology is compared with the leading nonimpact printing technologies. Computer to press is contrasted with computer to print techniques. The newest available digital multicolor presses are described - the direct imaging offset printing press from HEIDELBERG with new laser imaging technique as well as the INDIGO and XEIKON presses based on electrophotography. Regarding technical specifications, economic calculations and print quality, it is worked out that each technique has its own market segments. An outlook is given for future computer to press techniques and the potential of nonimpact printing technologies for advanced high-speed multicolor computer to print equipment. Synergy effects from the NIP-technologies to the conventional printing technologies and vice versa are possible for building up innovative new products, for example hybrid printing systems. It is also shown that there is potential for improving the print quality, based on special screening algorithms, and a higher number of grey levels per pixel by using NIP-technologies. As an intermediate step in digitalization of the production flow, but also as an economical solution computer to plate equipment is described. By producing printed products totally in a digital way, digital color proofing as well as color management systems are needed. The newest high-tech equipment using NIP-technologies for producing proofs is explained. All in all it is shown that the state of the art in digital multicolor printing has reached

  7. Hydrogen storage: state-of-the-art and future perspective

    International Nuclear Information System (INIS)

    Tzimas, E.; Filiou, C.; Peteves, S.D.; Veyret, J.B.

    2003-01-01

    The EU aims at establishing a sustainable energy supply, able to provide affordable and clean energy without increasing green house gas emissions. Hydrogen and fuel cells are seen by many as key energy system solutions for the 21. century, enabling clean and efficient production of power and heat from a broad range of primary energy sources. To be effective, there is a crucial need for well-coordinated research, development and deployment at European Level. The particular segment of hydrogen storage is one key element of the full hydrogen chain and it must meet a number of challenges before it is introduced into the global energy system. Regarding its energy characteristics, the gravimetric energy density of hydrogen is about three times higher than gasoline, but its energy content per volume is about a quarter. Therefore, the most significant problem for hydrogen (in particular for on-board vehicles) is to store sufficient -amounts of hydrogen. The volumetric energy density of hydrogen can be increased by compression or liquefaction which are both the most mature technologies. Still the energy required for both compression and liquefaction is one element to be properly assessed in considering the different pathways in particular for distribution. As far as on-board vehicle storage is concerned all possible options (compressed, liquid, metal hydrides and porous structures) have their own advantages and disadvantages with respect to weight, volume, energy efficiency, refuelling times, cost and safety aspects. To address these problems, long-term commitments to scientific excellence in research, coupled with co-ordination between the many different stakeholders, is required. In the current state-of-the-art in hydrogen storage, no single technology satisfies all of the criteria required by manufacturers and end-users, and a large number of obstacles have to be overcome. The current hydrogen storage technologies and their associated limitations/needs for improvement

  8. State of the art in benefit-risk analysis: introduction.

    Science.gov (United States)

    Verhagen, H; Tijhuis, M J; Gunnlaugsdóttir, H; Kalogeras, N; Leino, O; Luteijn, J M; Magnússon, S H; Odekerken, G; Pohjola, M V; Tuomisto, J T; Ueland, Ø; White, B C; Holm, F

    2012-01-01

    Risk-taking is normal in everyday life if there are associated (perceived) benefits. Benefit-Risk Analysis (BRA) compares the risk of a situation to its related benefits and addresses the acceptability of the risk. Over the past years BRA in relation to food and food ingredients has gained attention. Food, and even the same food ingredient, may confer both beneficial and adverse effects. Measures directed at food safety may lead to suboptimal or insufficient levels of ingredients from a benefit perspective. In BRA, benefits and risks of food (ingredients) are assessed in one go and may conditionally be expressed into one currency. This allows the comparison of adverse and beneficial effects to be qualitative and quantitative. A BRA should help policy-makers to make more informed and balanced benefit-risk management decisions. Not allowing food benefits to occur in order to guarantee food safety is a risk management decision much the same as accepting some risk in order to achieve more benefits. BRA in food and nutrition is making progress, but difficulties remain. The field may benefit from looking across its borders to learn from other research areas. The BEPRARIBEAN project (Best Practices for Risk-Benefit Analysis: experience from out of food into food; http://en.opasnet.org/w/Bepraribean) aims to do so, by working together with Medicines, Food Microbiology, Environmental Health, Economics & Marketing-Finance and Consumer Perception. All perspectives are reviewed and subsequently integrated to identify opportunities for further development of BRA for food and food ingredients. Interesting issues that emerge are the varying degrees of risk that are deemed acceptable within the areas and the trend towards more open and participatory BRA processes. A set of 6 'state of the art' papers covering the above areas and a paper integrating the separate (re)views are published in this volume. Copyright © 2011 Elsevier Ltd. All rights reserved.

  9. Audiodescription Research: State of the Art and Beyond

    OpenAIRE

    Braun, S

    2008-01-01

    Audiodescription (AD) is a growing arts and media access service for visually impaired people. As a practice rooted in intermodal mediation, i.e. ’translating’ visual images into verbal descriptions, it is in urgent need of interdisciplinary research-led grounding. Seeking to stimulate further research in this field, this paper aims to discuss the major dimensions of AD, give an overview of completed an ongoing research relating to each of these dimensions and outline questions for further ac...

  10. Assessment of the State of the Art of Flight Control Technologies as Applicable to Adverse Conditions

    Science.gov (United States)

    Reveley, Mary s.; Briggs, Jeffrey L.; Leone, Karen M.; Kurtoglu, Tolga; Withrow, Colleen A.

    2010-01-01

    Literature from academia, industry, and other Government agencies was surveyed to assess the state of the art in current Integrated Resilient Aircraft Control (IRAC) aircraft technologies. Over 100 papers from 25 conferences from the time period 2004 to 2009 were reviewed. An assessment of the general state of the art in adaptive flight control is summarized first, followed by an assessment of the state of the art as applicable to 13 identified adverse conditions. Specific areas addressed in the general assessment include flight control when compensating for damage or reduced performance, retrofit software upgrades to flight controllers, flight control through engine response, and finally test and validation of new adaptive controllers. The state-of-the-art assessment applicable to the adverse conditions include technologies not specifically related to flight control, but may serve as inputs to a future flight control algorithm. This study illustrates existing gaps and opportunities for additional research by the NASA IRAC Project

  11. State of the art on bioethanol production; Stato dell'arte della produzione di bioetanolo

    Energy Technology Data Exchange (ETDEWEB)

    Barisano, D; De Bari, I; Viola, E; Zimbardi, F; Braccio, G [ENEA, Divisione Fonti Rinnovabili di Energia, Centro Ricerche Trisaia, Policoro, Matera (Italy); Cantarella, M; Gallifuoco, A [L' Aquila Univ., L' Aquila (Italy). Dipt. di Ingegneria Chimica e dei Materiali

    2001-07-01

    The state of the art, deals with the ethanol production from current processes based on the use of sugar and starch as feedstock and those under development based on lignocellulosic biomass. In the first section are reported the commercially available processes together with hints to the newest technologies. As regard the ethanol production from lignocellulosics, it has been collected data on the biomass availability in Europe as energy crops, industrial crops, agricultural residues and domestic waste. It is provided a bibliographic study on the technologies and processes under development worldwide for the conversion of lignocellulosics into ethanol. Finally, a brief discussion on the economics highlights the near term viability of producing ethanol by this way. [Italian] Questo lavoro tratta della produzione di etanolo da diverse biomasse, compreso i materiali lignocellulosici. Sono riportati cenni al mercato mondiale ed europeo dell'etanolo insieme ad una breve rassegna dei processi impiegati correntemente; si tratta per lo piu' di tecnologie ormai mature basate sull'utilizzo di piante ad alto contenuto di zucchero o di amido. Per quanto riguarda la produzione di etanolo da biomasse lignocellulosiche, sono riportati i risultati di un'indagine statistica sulla disponibilita' in Europa di questi materiali in termini di coltivazini dedicate, residui agro-forestali e rifiuti domestici. E' riportata altresi una ricerca bibliografica sui recenti sviluppi dei processi di conversione a etanolo su scala banco e pilota. Infine, una breve discussione sugli aspetti economici connessi all'utilizzo di materiali lignocellulosici per la produzione di etanolo mostra come questi processi si stiano avvicinando alla completa fattibilita'.

  12. State of the art on bioethanol production; Stato dell'arte della produzione di bioetanolo

    Energy Technology Data Exchange (ETDEWEB)

    Barisano, D.; De Bari, I.; Viola, E.; Zimbardi, F.; Braccio, G. [ENEA, Divisione Fonti Rinnovabili di Energia, Centro Ricerche Trisaia, Policoro, Matera (Italy); Cantarella, M.; Gallifuoco, A. [L' Aquila Univ., L' Aquila (Italy). Dipt. di Ingegneria Chimica e dei Materiali

    2001-07-01

    The state of the art, deals with the ethanol production from current processes based on the use of sugar and starch as feedstock and those under development based on lignocellulosic biomass. In the first section are reported the commercially available processes together with hints to the newest technologies. As regard the ethanol production from lignocellulosics, it has been collected data on the biomass availability in Europe as energy crops, industrial crops, agricultural residues and domestic waste. It is provided a bibliographic study on the technologies and processes under development worldwide for the conversion of lignocellulosics into ethanol. Finally, a brief discussion on the economics highlights the near term viability of producing ethanol by this way. [Italian] Questo lavoro tratta della produzione di etanolo da diverse biomasse, compreso i materiali lignocellulosici. Sono riportati cenni al mercato mondiale ed europeo dell'etanolo insieme ad una breve rassegna dei processi impiegati correntemente; si tratta per lo piu' di tecnologie ormai mature basate sull'utilizzo di piante ad alto contenuto di zucchero o di amido. Per quanto riguarda la produzione di etanolo da biomasse lignocellulosiche, sono riportati i risultati di un'indagine statistica sulla disponibilita' in Europa di questi materiali in termini di coltivazini dedicate, residui agro-forestali e rifiuti domestici. E' riportata altresi una ricerca bibliografica sui recenti sviluppi dei processi di conversione a etanolo su scala banco e pilota. Infine, una breve discussione sugli aspetti economici connessi all'utilizzo di materiali lignocellulosici per la produzione di etanolo mostra come questi processi si stiano avvicinando alla completa fattibilita'.

  13. State of the Art in the Conceptual Design of Breakwaters

    DEFF Research Database (Denmark)

    Burcharth, H. F.

    2000-01-01

    with the vagaries of nature and produce structures which will survive and function for several generations. The design tools available to us are better than ever and we can, in a rational way, deal with the uncertainties inherent in sea states and structural responses. Provided no failure mode is overlooked we can...

  14. Lighting quality in hospital wards - State of the art

    DEFF Research Database (Denmark)

    Stidsen, Lone; Kirkegaard, Poul Henning; Fisker, Anna Marie

    When constructing and designing hospitals for the future, patients, staff and guests are in focus. Designing a healing hospital environment is a very important factor when planning new hospitals. How can aspects such as design, architecture, arts, lights, sounds and materials support and improve...... the patients' recovery rate and the satisfaction of staff and guests? Literature and research on this subject are full of contrasting theories, myths and contradictions as well as lack of understanding of the interplay between different design parameters in an integrated design. The physical settings...

  15. Harvesting Robots for High-value Crops: State-of-the-art Review and Challenges Ahead

    NARCIS (Netherlands)

    Bac, C.W.; Henten, van E.; Hemming, J.; Edan, Y.

    2014-01-01

    This review article analyzes state-of-the-art and future perspectives for harvesting robots in high-value crops. The objectives were to characterize the crop environment relevant for robotic harvesting, to perform a literature review on the state-of-the-art of harvesting robots using quantitative

  16. 77 FR 5281 - State-of-the-Art Reactor Consequence Analyses Reports

    Science.gov (United States)

    2012-02-02

    ... NUCLEAR REGULATORY COMMISSION [Docket ID: NRC-2012-0022] State-of-the-Art Reactor Consequence... release of Draft NUREG-1935, ``State-of-the-Art Reactor Consequence Analyses (SOARCA) Report,'' for public... offsite radiological health consequences for potential severe reactor accidents for the Peach Bottom...

  17. State of the art of the advanced pressurized water reactor

    International Nuclear Information System (INIS)

    Seifritz, W.; Chawla, R.

    1987-01-01

    A review is given of the present status of the works concerned with an advanced pressurized water reactor (APWR). It includes the following items: reactor physics, thermal and hydraulic investigations and other engineering aspects as well as an analysis of electricity generation cost and long-term problems of embedding the APWR in a plutonium economy. As a summary it can be stated that there are discernible no principal obstacles of technically accomplishing an APWR, but there will be necessary considerable expenses in research and development works if it should be intended to start commercial service of an APWR up to the end of this century. (author)

  18. Alternative Work Schedules: The State of the Art.

    Science.gov (United States)

    Newstrom, John W.; Pierce, Jon L.

    1979-01-01

    Presents a typology of modifications to the standard work week, reviews the current state of research-based knowledge regarding the effectiveness of each major type of alternative, and presents implementation suggestions for personnel interested in adopting one or more of the alternative forms. (Author/IRT)

  19. 14 CFR 1203.403 - State-of-the-art and intelligence.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false State-of-the-art and intelligence. 1203.403... PROGRAM Guides for Original Classification § 1203.403 State-of-the-art and intelligence. A logical... available from intelligence sources is known or is available to others. It is also important to consider...

  20. Development of a state-of-the-art solid waste characterisation facility at JRC ISPRA

    International Nuclear Information System (INIS)

    Huhtiniemi, I.; Anselmi, M.; Hubert, P.; Vassallo, G.

    2003-01-01

    This paper will review the development and construction of a state-of-the-art waste characterisation facility that represents a fundamental element in the JRC's strategy to characterise radioactive wastes originating from four decades of nuclear research activities conducted at the Ispra Site. The state-of-the-art NDA measurement solution selected by JRC-Ispra will be presented in the light of special requirements imposed by applicable Italian legislation, norms and the qualities of the waste packages. The intended plant combines the state-of-the-art-measurement solution with comprehensive process automation in an industrial environment and is therefore of significant interest to the radioactive waste management community. (orig.)

  1. Hydrogen from biomass: state of the art and research challenges

    Energy Technology Data Exchange (ETDEWEB)

    Milne, Thomas A; Elam, Carolyn C; Evans, Robert J

    2002-02-01

    The report was prepared for the International Energy Agency (IEA) Agreement on the Production and Utilization of Hydrogen, Task 16, Hydrogen from Carbon-Containing Materials. Hydrogen's share in the energy market is increasing with the implementation of fuel cell systems and the growing demand for zero-emission fuels. Hydrogen production will need to keep pace with this growing market. In the near term, increased production will likely be met by conventional technologies, such as natural gas reforming. In these processes, the carbon is converted to CO2 and released to the atmosphere. However, with the growing concern about global climate change, alternatives to the atmospheric release of CO2 are being investigated. Sequestration of the CO2 is an option that could provide a viable near-term solution. Reducing the demand on fossil resources remains a significant concern for many nations. Renewable-based processes like solar- or wind-driven electrolysis and photobiological water splitting hold great promise for clean hydrogen production; however, advances must still be made before these technologies can be economically competitive. For the near-and mid-term, generating hydrogen from biomass may be the more practical and viable, renewable and potentially carbon-neutral (or even carbon-negative in conjunction with sequestration) option. Recently, the IEA Hydrogen Agreement launched a new task to bring together international experts to investigate some of these near- and mid-term options for producing hydrogen with reduced environmental impacts. This review of the state of the art of hydrogen production from biomass was prepared to facilitate in the planning of work that should be done to achieve the goal of near-term hydrogen energy systems. The relevant technologies that convert biomass to hydrogen, with emphasis on thermochemical routes are described. In evaluating the viability of the conversion routes, each must be put in the context of the availability of

  2. Aging in the Netherlands: State of the art and science

    NARCIS (Netherlands)

    Smits, C.H.M.; van den Beld, H.K.; Aartsen, M.J.; Schroots, J.J.F.

    2013-01-01

    The population of the Netherlands is aging, although it is still relatively young in comparison with the population of most other European countries. As Dutch society transitions from a welfare state to a society based more on individual responsibility, the increasingly well-educated and financially

  3. Corpora and Language Assessment: The State of the Art

    Science.gov (United States)

    Park, Kwanghyun

    2014-01-01

    This article outlines the current state of and recent developments in the use of corpora for language assessment and considers future directions with a special focus on computational methodology. Because corpora began to make inroads into language assessment in the 1990s, test developers have increasingly used them as a reference resource to…

  4. State of the art in oil market in the world

    International Nuclear Information System (INIS)

    Banks, F. E.

    2007-01-01

    Things move fast in the world of oil and unfortunately many events do not always receive an appropriate interpretation. The present update reviews the on-going oil peak debate, providing evidence against unjustified optimistic propositions, discussing the predictable shortage of energy materials and its influence on prices. Moreover, the return of OPEC to the oil market drivers seat and the irruption of state oil companies from exporting countries are also commented. (Author)

  5. Practical steganalysis of digital images: state of the art

    Science.gov (United States)

    Fridrich, Jessica; Goljan, Miroslav

    2002-04-01

    Steganography is the art of hiding the very presence of communication by embedding secret messages into innocuous looking cover documents, such as digital images. Detection of steganography, estimation of message length, and its extraction belong to the field of steganalysis. Steganalysis has recently received a great deal of attention both from law enforcement and the media. In our paper, we classify and review current stego-detection algorithms that can be used to trace popular steganographic products. We recognize several qualitatively different approaches to practical steganalysis - visual detection, detection based on first order statistics (histogram analysis), dual statistics methods that use spatial correlations in images and higher-order statistics (RS steganalysis), universal blind detection schemes, and special cases, such as JPEG compatibility steganalysis. We also present some new results regarding our previously proposed detection of LSB embedding using sensitive dual statistics. The recent steganalytic methods indicate that the most common paradigm in image steganography - the bit-replacement or bit substitution - is inherently insecure with safe capacities far smaller than previously thought.

  6. [Birth weight and frozen embryo transfer: State of the art].

    Science.gov (United States)

    Anav, M; Ferrières-Hoa, A; Gala, A; Fournier, A; Zaragoza, S; Vintejoux, E; Vincens, C; Hamamah, S

    2018-04-18

    The aim of this study was to update our acknowledgment if there is a link between assisted embryo cryopreservation and epigenetics in human? Animal studies have demonstrated epigenetics consequence and especially imprinting disorders due to in vitro culture. In human, it is important to note that after frozen embryo transfer birth weight is significantly increased by 81 to 250g. But these studies cannot identify the reasons of such difference. This review strongly suggests that embryo cryopreservation is responsible for birth weight variations but mechanisms not yet elucidated. Epigenetics is probably one of these but to date, none study is able to prove it. We have to be attentive on a possible link between assisted reproductive technology (ART) and epigenetics reprogrammation. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

  7. Neuroscience, ethics, and national security: the state of the art.

    Directory of Open Access Journals (Sweden)

    Michael N Tennison

    Full Text Available National security organizations in the United States, including the armed services and the intelligence community, have developed a close relationship with the scientific establishment. The latest technology often fuels warfighting and counter-intelligence capacities, providing the tactical advantages thought necessary to maintain geopolitical dominance and national security. Neuroscience has emerged as a prominent focus within this milieu, annually receiving hundreds of millions of Department of Defense dollars. Its role in national security operations raises ethical issues that need to be addressed to ensure the pragmatic synthesis of ethical accountability and national security.

  8. Neuroscience, ethics, and national security: the state of the art.

    Science.gov (United States)

    Tennison, Michael N; Moreno, Jonathan D

    2012-01-01

    National security organizations in the United States, including the armed services and the intelligence community, have developed a close relationship with the scientific establishment. The latest technology often fuels warfighting and counter-intelligence capacities, providing the tactical advantages thought necessary to maintain geopolitical dominance and national security. Neuroscience has emerged as a prominent focus within this milieu, annually receiving hundreds of millions of Department of Defense dollars. Its role in national security operations raises ethical issues that need to be addressed to ensure the pragmatic synthesis of ethical accountability and national security.

  9. Analysis and simulation of emergency departments: state of the art and prospects

    OpenAIRE

    Vanbrabant, Lien; Braekers, Kris; Ramaekers, Katrien

    2017-01-01

    This abstract gives a brief overview of the state of the art on the analysis and simulation of emergency departments in hospitals. Based on this, research opportunities which will be addressed during my PhD are identified.

  10. Utility Wind Integration and Operating Impact - State of the Art

    Energy Technology Data Exchange (ETDEWEB)

    Smith, J. C.; Milligan, M. R.; DeMeo, E. A.; Parsons, B.

    2007-08-01

    At the end of 2005, the Power Engineering Society (PES) published a special issue of its Power & Energy Magazine that focused on integrating wind into the power system. This paper provides a summary and update on many of the salient points from that special issue about the current state of knowledge regarding utility wind integration issues.

  11. Vehicle seat design : state of the art and recent development

    NARCIS (Netherlands)

    Tan, C.F.; Delbressine, F.L.M.; Rauterberg, G.W.M.; Mokhtar, A.S.; Abdullah, E.J.; Adam, N.M.

    2007-01-01

    Seats are one of the most important components of vehicles and they are the place where professional driver spend most of their time. For example, according to Occupational Outlook Handbook by United State Department of Labor, the truck drivers frequently work 50 or more hours a week. The truck

  12. State-of-the-art computer technologies used to train nuclear specialists and to conduct research

    International Nuclear Information System (INIS)

    Korovin, Yu.A.; Tikhonenko, A.V.

    2011-01-01

    The paper discusses innovative methods used in the process of training nuclear specialists and conducting research which are based on state-of-the-art computer technologies. The approach proposed makes wide use of mathematical modeling and state-of-the-art programming techniques. It is based on the development, improvement and application of problem-oriented computer codes to support the teaching process and to solve fundamental and applied problems of nuclear physics and nuclear engineering.

  13. A quick guide to wind power forecating : state-of-the-art 2009.

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, C.; Keko, H.; Bessa, R.; Miranda, V.; Botterud, A.; Wang, J.; Conzelmann, G.; Decision and Information Sciences; INESC Porto

    2009-11-20

    This document contains a summary of the main findings from our full report entitled 'Wind Power Forecasting: State-of-the-Art 2009'. The aims of this document are to provide guidelines and a quick overview of the current state-of-the-art in wind power forecasting (WPF) and to point out lines of research in the future development of forecasting systems.

  14. The Impact of ART on Live Birth Outcomes: Differing Experiences across Three States.

    Science.gov (United States)

    Luke, Sabrina; Sappenfield, William M; Kirby, Russell S; McKane, Patricia; Bernson, Dana; Zhang, Yujia; Chuong, Farah; Cohen, Bruce; Boulet, Sheree L; Kissin, Dmitry M

    2016-05-01

    Research has shown an association between assisted reproductive technology (ART) and adverse birth outcomes. We identified whether birth outcomes of ART-conceived pregnancies vary across states with different maternal characteristics, insurance coverage for ART services, and type of ART services provided. CDC's National ART Surveillance System data were linked to Massachusetts, Florida, and Michigan vital records from 2000 through 2006. Maternal characteristics in ART- and non-ART-conceived live births were compared between states using chi-square tests. We performed multivariable logistic regression analyses and calculated adjusted odds ratios (aOR) to assess associations between ART use and singleton preterm delivery (birth. ART use in Massachusetts was associated with significantly lower odds of twins as well as triplets and higher order births compared to Florida and Michigan (aOR 22.6 vs. 30.0 and 26.3, and aOR 37.6 vs. 92.8 and 99.2, respectively; Pinteraction order gestations per cycle was lower in Massachusetts, which may be due to the availability of insurance coverage for ART in Massachusetts. © 2016 John Wiley & Sons Ltd.

  15. State of the art, to protect lines that transport hydrocarbons

    International Nuclear Information System (INIS)

    Carta Petrolera

    1998-01-01

    Personnel's periodic and forced displacement for monitoring the buried pipe and to obtain reports on the state of the lines, it will no longer be necessary in some tracts of the pipeline in Colombia, now the remote supervision exists for the control of the systems of cathodic protection, a technology that ECOPETROL is applying in its lines of transport. This technique facilitates the preventive maintenance to the systems to the corrosion protection

  16. State of the Art Review: Poverty and the Developing Brain

    Science.gov (United States)

    Riis, Jenna L.; Noble, Kimberly G.

    2016-01-01

    In the United States, >40% of children are either poor or near-poor. As a group, children in poverty are more likely to experience worse health and more developmental delay, lower achievement, and more behavioral and emotional problems than their more advantaged peers; however, there is broad variability in outcomes among children exposed to similar conditions. Building on a robust literature from animal models showing that environmental deprivation or enrichment shapes the brain, there has been increasing interest in understanding how the experience of poverty may shape the brain in humans. In this review, we summarize research on the relationship between socioeconomic status and brain development, focusing on studies published in the last 5 years. Drawing on a conceptual framework informed by animal models, we highlight neural plasticity, epigenetics, material deprivation (eg, cognitive stimulation, nutrient deficiencies), stress (eg, negative parenting behaviors), and environmental toxins as factors that may shape the developing brain. We then summarize the existing evidence for the relationship between child poverty and brain structure and function, focusing on brain areas that support memory, emotion regulation, and higher-order cognitive functioning (ie, hippocampus, amygdala, prefrontal cortex) and regions that support language and literacy (ie, cortical areas of the left hemisphere). We then consider some limitations of the current literature and discuss the implications of neuroscience concepts and methods for interventions in the pediatric medical home. PMID:26952506

  17. Functional MRI: Genesis, State of the art and the Sequel

    International Nuclear Information System (INIS)

    Bharath, Rose Dawn

    2014-01-01

    The last 25 years have seen functional magnetic resonance imaging (fMRI) grow from an interesting experimental imaging technique in the hands of some to a primary investigation of choice in the localization and lateralization of brain function prior to surgery. Developments in the field of computational neurosciences have transformed fMRI analysis from classical subtractive type analysis to dynamic casual modeling, and now to graph theory analysis. This has widened the scope of fMRI, and is therefore finding applications in understanding neural correlates of diseases like autism and Alzheimer's disease, prognostication of diseases like traumatic brain injury, and has the potential to direct therapy. It is unfortunately true that this widened ambit has not received the clinical attention it deserves, probably because fMRI is susceptible to artifacts from skull base and blood products and has reduced sensitivity in patients with vascular malformations, or because a change in medical practice usually lags behind the technological and scientific developments that make it possible. This review focuses on the developmental chronology of fMRI image analysis in the last 25 years with highlights on major milestones like developments in the field of paradigms, analysis methods, resting state fMRI, and functional connectivity. To make the statistical images of brain at work more colorful, the article starts with genesis of fMRI and ends with the hope of a promising bright future. Many inputs for this article are obtained from a series of 103 review articles edited by Bandettini et al., compiling personal experiences of pioneers in this field. Interested readers are encouraged to refer to these for a more complete overview.

  18. Chemical protective clothing - State of the art and the future

    International Nuclear Information System (INIS)

    Perkins, J.L.

    1990-01-01

    Clothing used to protect the skin from exposure to chemicals (CPC) is an integral part of many work-places. Only 10-15 years ago the strategy behind selecting CPC to afford this protection was to find a type of CPC which was essentially liquid-proof and would therefore protect the skin from exposure to a liquid chemical. However, in the last 10 years there has been an explosion of data in the industrial hygiene field related to the permeation of chemical protective clothing by liquid chemicals. These data indicate clearly that when CPC is exposed to a chemical, it may not disintegrate or degrade, but nevertheless, will be permeated by the chemical and the skin will be exposed. This has led to a new strategy for selecting CPC which essentially assumes that any exposure of the skin is harmful. Consequently, a worst-case scenario is assumed when selecting CPC and often the garment with the best permeation properties is selected regardless of cost. This philosophy is prompted by a lack of knowledge concerning the skin and how it is permeated by industrial chemicals in their liquid and vapor states. The interests in the last 10 years in CPC has led to new developments and an exciting future for protective clothing. Several new laminated polymeric materials are now being used in both gloves and full-body suits. These polymers are plastic rather than elastomeric and therefore do not afford good dexterity properties. However, their permeability properties are extremely good. In addition, further research on dermal penetration should give the industrial hygienist the necessary information to perform risk assessments for skin exposure. These new risk assessment strategies should negate the current need to overprotect workers. Overprotection often leads to unnecessary costs and can lead to increased stress on the worker in the form of heat stress

  19. Nickel-base superalloy powder metallurgy: state-of-the-art

    International Nuclear Information System (INIS)

    Allen, M.M.; Athey, R.L.; Moore, J.B.

    1975-01-01

    Development of powder metallurgical methods for fabrication of Ni-base superalloy turbine engine disks is reviewed. Background studies are summarized and current state-of-art is discussed for the F100 jet engine, advanced applications, and forging processes

  20. Symposium Connects Government Problems with State of the Art Network Science Research

    Science.gov (United States)

    2015-10-16

    Symposium Connects Government Problems with State-of-the- Art Network Science Research By Rajmonda S. Caceres and Benjamin A. Miller Network...the US Gov- ernment, and match these with the state-of-the- art models and techniques developed in the network science research community. Since its... science has grown significantly in the last several years as a field at the intersec- tion of mathematics, computer science , social science , and engineering

  1. Micro- and nanobiosensors—state of the art and trends

    International Nuclear Information System (INIS)

    Urban, Gerald A

    2009-01-01

    Recent progress in microsystem technologies for creating small, integrated and reliable microelectronic devices and microtransducers in combination with biological sensing elements has raised the expectation to get a comprehensive insight into dynamic cellular metabolic events and subsequently a complete understanding of the metabolism of human biology. Such micro- and nanobiosensor tools in combination with appropriate microfluidics enable the simultaneous description and moreover monitoring of gene, protein expression and metabolic states in a biosystem. This knowledge will lead to new future therapies and pharmaceutical treatments. Furthermore, with such methods and microdevices a new direct combination of diagnostics and immediately starting therapy can be established which is called theranostic. There are a lot of challenging problems to be overcome to reach this goal: microsystems monitoring of physical parameters in biological systems is well established, whereas chemo- and biosensors are available for only a few parameters and mainly as in vitro devices. Gene arrays entered the research market but are up to now not in clinical practice. Protein arrays are in a developmental state with promising results, but far from a mature reproducible state. For getting insights into metabolic events intra- and extracellularly, some new and promising technologies are under research and will undoubtedly revolutionize systems biology but only in the longer run. As a conclusion, it can be stated that new methods stemming from microelectronics and biological technologies are now entering the world of chemical and biological analytics as well as clinics to offer clinicians new theranostic tools in the future. (topical review)

  2. The LIFE Laser Design in Context: A Comparison to the State-of-the-Art

    International Nuclear Information System (INIS)

    Deri, R.J.; Bayramian, A.J.; Erlandson, A.C.

    2011-01-01

    The current point design for the LIFE laser leverages decades of solid-state laser development in order to achieve the performance and attributes required for inertial fusion energy. This document provides a brief comparison of the LIFE laser point design to other state-of-the-art solid-state lasers. Table I compares the attributes of the current LIFE laser point design to other systems. the state-of-the-art for single-shot performance at fusion-relevant beamline energies is exemplified by performance observed on the National Ignition Facility. The state-of-the-art for high average power is exemplified by the Northrup Grumman JHPSSL laser. Several items in Table I deal with the laser efficiency; a more detailed discussion of efficiency can be found in reference 5. The electrical-to-optical efficiency of the LIFE design exceeds that of reference 4 due to the availability of higher efficiency laser diode pumps (70% vs. ∼50% used in reference 4). LIFE diode pumps are discussed in greater detail in reference 6. The 'beam steering' state of the art is represented by the deflection device that will be used in the LIFE laser, not a laser system. Inspection of Table I shows that most LIFE laser attributes have already been experimentally demonstrated. The two cases where the LIFE design is somewhat better than prior experimental work do not involve the development of new concepts: beamline power is increased simply by increasing aperture (as demonstrated by the power/aperture comparison in Table I), and efficiency increases are achieved by employing state-of-the-art diode pumps. In conclusion, the attributes anticipated for the LIFE laser are consistent with the demonstrated performance of existing solid-state lasers.

  3. The Supplier evaluation problem: the state of the art

    Directory of Open Access Journals (Sweden)

    Nazanin Ghasemy

    2018-02-01

    Full Text Available In today's competitive world, one of important factor in survival is the reduction of production cost. In the current age the companies for remaining competitive and achieving the customer satisfaction has been paid more attention to supply chain management, so that competition between companies is no longer the case, also there is between supply chains. In this regard, the supplier selection as a strategic key plays an important role in the success of companies. Selecting the right suppliers can significantly reduce the cost of purchasing and Increase the competitiveness of the organization. Decision making and supplier selection is basically a multi-criteria issue. Nevertheless, some of these criteria might be in conflict with each other. This is one of strategic importance to most organizations. The nature of such decisions is usually complex and not structured. The present paper provides a comprehensive literature review on some of articles published for supplier evaluation in recent years.

  4. State of the art of plasma cutting in the GDR

    International Nuclear Information System (INIS)

    Foerster, H.; Wiese, P.

    1983-01-01

    In the GDR plasma cutting equipment has been developed for the power range of 3 to 100 kW. Metallic materials can be cut by machine or by hand up to a thickness of 150 mm. The great cutting velocities are of advantage since they allow coupling with the most modern directing machines. Possibilities of reducing detrimental effects of light, noise, and toxic materials by protective measures are discussed on the basis of examples

  5. The emancipatory character of action research, its history and the present state of the art

    NARCIS (Netherlands)

    Boog, B.

    2003-01-01

    Right from the start. action research was intended to be emancipatory research, and it still is. This article will underpin this by outlining its history and the present state of the art. Though a variety of action research approaches have developed along divergent theoretical pathways, it will be

  6. State of the Art of the Ignalina RBMK-1500 Safety

    International Nuclear Information System (INIS)

    Uspuras, E.

    2010-01-01

    Ignalina NPP is the only nuclear power plant in Lithuania consisting of two units, commissioned in 1983 and 1987. Unit 1 of Ignalina NPP was shut down for decommissioning at the end of 2004 and Unit 2 is to be operated until the end of 2009. Both units are equipped with channel-type graphite-moderated boiling water reactors RBMK-1500. The paper summarizing the results of deterministic and probabilistic analyses is developed within 1991 to 2007 by specialists from Lithuanian Energy Institute. The main operational safety aspects, including analyses performed according the Ignalina Safety Improvement Programs, development and installation of the Second Shutdown System and Guidelines on Severe Accidents Management are discussed. Also the phenomena related to the closure of the gap between fuel channel and graphite bricks, multiple fuel channel tube rupture, and containment issues as well as implication of the external events to the Ignalina NPP safety are discussed separately.

  7. State of art of nuclear telerobots

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Ji Sup; Oh, S C; Park, Y S; Kim, K S

    1997-03-01

    A state-of-the-art survey on telerobotics technology for nuclear applications is made with view to provide technical data base to interested users. Most of the information are gathered from G7 countries with some addition of Korean status of development. Although the bulk of information is focussed on mobile robots, graphic simulation for man-machine interface is also included in the survey. Examples of telerobotics application to nuclear work are investigated. (author). 108 refs., 9 tabs., 64 figs

  8. State-of-the-art of large scale biogas plants

    International Nuclear Information System (INIS)

    Prisum, J.M.; Noergaard, P.

    1992-01-01

    A survey of the technological state of large scale biogas plants in Europe treating manure is given. 83 plants are in operation at present. Of these, 16 are centralised digestion plants. Transport costs at centralised digestion plants amounts to between 25 and 40 percent of the total operational costs. Various transport equipment is used. Most large scale digesters are CSTRs, but serial, contact, 2-step, and plug-flow digesters are also found. Construction materials are mostly steel and concrete. Mesophilic digestion is most common (56%), thermophilic digestion is used in 17% of the plants, combined mesophilic and thermophilic digestion is used in 28% of the centralised plants. Mixing of digester content is performed with gas injection, propellers, and gas-liquid displacement. Heating is carried out using external or internal heat exchangers. Heat recovery is only used in Denmark. Gas purification equipment is commonplace, but not often needed. Several plants use separation of the digested manure, often as part of a post-treatment/-purification process or for the production of 'compost'. Screens, sieve belt separaters, centrifuges and filter presses are employed. The use of biogas varies considerably. In some cases, combined heat and power stations are supplying the grid and district heating systems. Other plants use only either the electricity or heat. (au)

  9. The State of the Art of Group Psychotherapy in Spain.

    Science.gov (United States)

    Martinez-Taboada, Cristina; Amutio, Alberto; Elgorriaga, Edurne; Arnoso, Ainara

    2015-10-01

    (1) What is the history and the theoretical orientation of group therapy in Spain? (2) How is training organized? (3) What role does group psychotherapy play in the health system in Spain? (4) What is the relationship between group psychotherapy research and clinical practice in Spain? (5) What topics can be identified as unique to therapy groups in Spain? (6) How are group-related issues important within the social background of Spain? and (7) What does group work hold for the future? Although not even a century has passed since the birth of this discipline, there have already been many events associated with the management of power and knowledge, the development of a sense of community, and the evolution of the political and social life of our country. Group therapy training is still evolving and is properly supported and accredited by prestigious institutions. In the 2013 Symposium of the Spanish Society of Group Psychotherapy and Group Techniques (SEPTG), the need for joint group theories and techniques within the profession's activities was clearly highlighted. Further, the enthusiasm of group psychotherapists to open themselves to specific social perspectives (health, education, community prevention, organizations) is a way of encouraging society to untangle conscious and unconscious knots that are created in social interaction.

  10. Digital forensics in the cloud: The state of the art

    CSIR Research Space (South Africa)

    Sibiya, G

    2015-05-01

    Full Text Available [21], Lee et al. [22], Lee and Un [23], Baar et al. [24] and Ting and Yang [25] implement cloud based services to carry out computing expensive tasks including data analysis and performing searches on big evidence data. The technologies can... as it was also proposed by many other researchers in the last few years including: Lee and Un [23]; Marty, [35]; Ruan et al. [36] and Wen et al. [15]. Copyright © 2015 The authors www.IST-Africa.org/Conference2015 Page 6 of 9 Table 1 Cloud Forensic Systems...

  11. The state of the art of thin-film photovoltaics

    International Nuclear Information System (INIS)

    Surek, T.

    1993-10-01

    Thin-film photovoltaic technologies, based on materials such as amorphous or polycrystalline silicon, copper indium diselenide, cadmium telluride, and gallium arsenide, offer the potential for significantly reducing the cost of electricity generated by photovoltaics. The significant progress in the technologies, from the laboratory to the marketplace, is reviewed. The common concerns and questions raised about thin films are addressed. Based on the progress to date and the potential of these technologies, along with continuing investments by the private sector to commercialize the technologies, one can conclude that thin-film PV will provide a competitive alternative for large-scale power generation in the future

  12. State of the Art in the Design of Coastal Structures

    DEFF Research Database (Denmark)

    Burcharth, Hans F.

    1998-01-01

    Coastal structures are used in coastal defence schemes with the objective of preventing shoreline erosion and flooding of the hinterland. Other objectives are sheltering of harbour basins and entrances against waves, stabilization of navigation channels at inlets and protection of water intakes a...

  13. State of the Art in the Design of Coastal Structures

    DEFF Research Database (Denmark)

    Burcharth, H. F.

    1997-01-01

    Coastal structures are used in coastal defence schemes with the objective of preventing shoreline erosion and flooding of the hinterland. Other objectives are sheltering of harbour basins and entrances against waves, stabilization of navigation channels at inlets, and protection of water intakes ...

  14. Genetic Bases of Stuttering: The State of the Art, 2011

    Science.gov (United States)

    Kraft, Shelly Jo; Yairi, Ehud

    2011-01-01

    Objective The literature on the genetics of stuttering is reviewed with special reference to the historical development from psychosocial explanations leading up to current biological research of gene identification. Summary A gradual progression has been made from the early crude methods of counting percentages of stuttering probands who have relatives who stutter to recent studies using entire genomes of DNA collected from each participant. Despite the shortcomings of some early studies, investigators have accumulated a substantial body of data showing a large presence of familial stuttering. This encouraged more refined research in the form of twin studies. Concordance rates among twins were sufficiently high to lend additional support to the genetic perspective of stuttering. More sophisticated aggregation studies and segregation analyses followed, producing data that matched recognized genetic models, providing the final ‘go ahead’ to proceed from the behavior/statistical genetics into the sphere of biological genetics. Recent linkage and association studies have begun to reveal contributing genes to the disorder. Conclusion No definitive findings have been made regarding which transmission model, chromosomes, genes, or sex factors are involved in the expression of stuttering in the population at large. Future research and clinical implications are discussed. PMID:22067705

  15. The state of the art of nuclear medicine in 1980

    International Nuclear Information System (INIS)

    Tamat, S.R.

    1982-01-01

    The second congress of World Federation of Nuclear Medicine and Biology proved that nuclear medicine is returning to physiology. Around 1951, when motorized detector was introduced and when GM tube was replaced by scintillation crystal detector, physiologic nuclear medicine moved to anatomic nuclear medicine. Since 1970, when research on cardiology developed, nuclear medicine has been returning to physiology. Since 1963 Kuhl has been doing research on quantitative tomography which develops to emission computerized tomography emphasizing the physiological aspects of medicine. The recent contribution of nuclear medicine to medical science is the concept that human body is a unity of dynamic structure consisting of millions of cubes moving physio-chemically. (RUW)

  16. State of the art of the energy policy in spain

    International Nuclear Information System (INIS)

    Lafuente Felez, A.

    1995-01-01

    After the slow application during the first years of the National Energy Plan (1991-2000), a sharp increase on the final energy demand has been noticed during 1994 in Spain and forecasts are still higher for year 95. In the electricity sector, the available power by means of auto production is growing, while in the legal framework, the Act on Ruling of the National Electricity System will let to adjust unexpected deviations between real and foreseen consumption in a flexible way and respecting free concurrence. In coal sector, a new system of aids is being implemented. This system is fully dependent from electricity ruling, more compatible with regards to European norms and quite transparent. In oil sector, liberalization is reaching good results in terms of concurrence and service. In gas sector, it is remarkable the expansion of this sector in the energy balance. This fact requires both security supply and better distribution, that are the two goals aimed by the new design of the national gas pipelines network. For all sectors, the principal axes of advanced action are: technology development, environment and energy saving. (Author)

  17. How the United States Funds the Arts. Third Edition

    Science.gov (United States)

    National Endowment for the Arts, 2012

    2012-01-01

    The infrastructure for arts and cultural support in the United States is complex and adaptive. Citizens who enjoy the arts can choose from a wide array of drama, visual and media arts, dance, music, and literature available in formal and informal settings--theaters, museums, and concert halls, but also libraries, schools, places of worship,…

  18. The state of art of the methods for thermohydraulics design of LMFBR fuel elements

    International Nuclear Information System (INIS)

    Fernandez y Fernandez, E.; Carajilescov, P.

    1981-09-01

    The present (experimental and analytical) state of art of the methods for thermohydraulics design of LMFBR fuel elements is analyzed. A development program is suggested, in order to obtain a computer code for modelling the distribution of coolant enthalpy in reactor core. This computer code is in development. (Author) [pt

  19. Shear design of wood beams : state of the art

    Science.gov (United States)

    Lawrence A. Soltis; Terry D. Gerhardt

    1988-01-01

    Current shear design technology in the United States for lumber or glued- laminated beams is confusing. This report summarizes shear stress and strength research including both analytical and experimental approaches. Both checked and unchecked beams are included. The analytical work has been experimentally verified for only limited load conditions and span-to- depth...

  20. Treatment of Childhood Depression: The State of the Art.

    Science.gov (United States)

    Clarizio, Harvey F.

    1986-01-01

    This article reviews various aspects of seven approaches to the treatment of childhood depression--psychoanalytic, behavioral, cognitive, familial, rational-emotive, multimodal, and drug interventions. Implications for practitioners are considered in terms of target selection, choice of treatment methods, rational evaluation based on developmental…

  1. Shrublands and Soil Erosion. An State-of-the-Art

    Science.gov (United States)

    García Estríngana, Pablo; Dunkerley, David; Cerdà, Artemi

    2014-05-01

    Shrublands and Soil Erosion. An State-of-the-Art Arid and semiarid regions occupy two-fifth of the continents (Reynolds et al., 2007). These regions are characterized by dry climatic conditions, recurrent droughts and a scant rainfall pattern with a marked seasonality and a high inter-annual variability which makes water to be a scant resource and vegetation to follow a high variability spatial distribution pattern (Breshears et al., 1998; Cecchi et al., 2006; Dunkerley, 2008). These conditions make these areas more sensitive to climate change (Rowell, 2005) and to land use change as a consequence of land abandonment (Poyatos et al., 2003; Delgado et al., 2010; García-Ruiz, 2010), increasing the risk of desertification (Puigdefábregas and Mendizabal, 1998; Geeson et al., 2002), in such a way that 65-70% of arid and semiarid areas are vulnerable to this degradation process (UNEP, 1991). Soil Erosion and Land Degradation are closely related to the changes in the vegetation cover (Zhao et al., 2013). Although other factors such as rainfall intensity or slope (Ziadat and Taimeh, 2013) the plant cover is the main factor that controls the soil erosion, controlling the infiltration and runoff generation (Cerdà, 1998a; Kargar Chigani et al., 2012; Haregeweyn, 2013). Soil erosion show non-sustainable rates under these regions, such as under Mediterranean conditions (Cerdà et al., 2010) and on agriculture land (Cerdà et al; 2007; 2009) due to climatic conditions, to parent material and to the roughed terrain (Romero Díaz et al., 2010). The traditional impact of grazing, of extremely intense fires, of ploughing and the widespread use of herbicides on agriculture, the increase of the road and railway embankments and the agricultural land abandonment cause vegetation removal. Canopy cover partitions rainfall reducing the amount of water reaching the soil and the kinetic energy of rainfall drops, protecting the soil against the impact of rainfall drops. Vegetation

  2. The art of scent

    DEFF Research Database (Denmark)

    Stenslund, Anette

    2017-01-01

    At the Museum of Art and Design in New York the The Art of Scent (1889–2012) exhibition announced its declared aim of bringing to the forefront of the arts what has long been considered the fallen angel of the senses: it would inscribe scent into fine art through a display characterised by its ex...... of art, this paper argues that scent that is not of high culture may yet, phenomenologically speaking, be considered great art....

  3. Measuring the quality of health care: state of the art.

    Science.gov (United States)

    Donaldson, M S; Nolan, K

    1997-05-01

    September 12-13, 1996, in Washington, DC, the Institute of Medicine, as part of its Special Initiative on Health Care Quality, held an invitational conference to illustrate exemplary quality measurement and to discuss the results. Patient reports, innovative uses of outcome measures for quality improvement, risk adjustment, assessment in integrated health plans and health care settings, clinical guidelines, and projects on disseminating information on quality measurement techniques and tools were among the topics represented. Brent James described studies undertaken to reduce adverse drug events (ADEs). When implementing any measurement system where error is a possible factor, it is important to emphasize identifying problems for the purpose of learning, not judgment. Lucian Leape agreed that staff involved must feel that the purpose of the study is to examine system problems, not individuals' mistakes. David Classen described a nonproprietary computerized disease-management program designed to reduce ADEs in infectious diseases. "A QUALITY VISION": Robert Brook said that the relationship between cost or resources devoted to care and quality is not well understood and is certainly not simple. He also said that although investments in measurement strategies are needed to make them better, that doesn't mean we shouldn't attempt to use the measurements we have now. Mark Chassin said that the presentations at the conference provided evidence that should allow us to conclude beyond a reasonable doubt that quality can be measured-with a degree of scientific precision equal to that of most of the measures used to take care of patients every day.

  4. Atypical epithelial hyperplasia of the breast: state of the art.

    Science.gov (United States)

    Dion, Ludivine; Racin, Adelaïde; Brousse, Susie; Beltjens, Françoise; Cauchois, Aurélie; Levêque, Jean; Coutant, Charles; Lavoué, Vincent

    2016-09-01

    Atypical epithelial hyperplasia (AEH) of the breast is considered benign histological lesions with breast cancer risk. This review focuses on clinical signification and management of AEH that remains controversial. A review of published studies was performed using medline database. In this review, we fully describe the current evidence available. In particular, we describe 1) data from immunohistochemistry and molecular studies that suggest AEH is a precursor of breast cancer; 2) epidemiological studies demonstrate low rate of breast cancer in women with AEH; 3) surgical excision is necessary after diagnosis of AEH, such as lobular carcinoma in situ or atypical ductal hyperplasia, on core needle biopsy; 4) although current recommendations are evolving to fewer (if not no) excisions for flat epithelial with atypia and classic lobular neoplasia found on percutaneous biopsy (without radiologic indications for excision). Expert commentary: HEA management steel need prospective evidences, but recent retrospective data give some clue for less invasive management for some of HEA.

  5. Text Generation: The State of the Art and the Literature.

    Science.gov (United States)

    1981-12-01

    Ablex, Norwood, N. J., 1980. [ de Joia 80] de Joia , A., and A. Stenton, Terms in Systemic Linguistics, Batsford Academic and Educational, Ltd...GENERATION TECHNOLOGY ....................................... 1 2. WHAT TECHNIQUES ARE NOW AVAILABLE FOR USE IN SYSTEM DESIGNS ?........... 3. BASIC...M odels of Discourse ............................................................ 6 * 9. DESIGNING IN 1986 FOR PRACTICAL TEXT GENERATION

  6. State of the art neurosurgical OP Theater Necesity, not option!

    Directory of Open Access Journals (Sweden)

    Onciul Răzvan

    2018-03-01

    Full Text Available Cerebral activity is extremely complex and requires a super diagnosis investigation - there is no limit to this super investigation, especially in the case of expansive tumor or non-tumoral lesions. Modernization of the diagnosis in these lesions has gained Science Fiction aspects. Adapting to those changes, operatory blocks and neurosurgeons all around the world have been improved to the same extent in order to obtain the most perfect results with keeping the quality of life. The modern slogan of neurosurgery is “MAXIMAL SAFE RESACTION”. Continuing on this theme we can state that the equipment of the surgical apparatus is very special and extremely expensive. Complex but in accordance with one of the most exquisite agglomeration of atoms in the entire known Universe, the human brain!

  7. The state of the art in abuse of biometrics

    NARCIS (Netherlands)

    Buhan, I.R.; Hartel, Pieter H.

    For applications like Terrorist Watch Lists and Smart Guns, a false rejection is more critical than a false acceptance. In this paper a new threat model focusing on false rejections is presented, and the standard architecture of a biometric system is extended by adding components like crypto, audit

  8. State-of-the-art dry active waste processing facility

    International Nuclear Information System (INIS)

    Hillmer, T.; Ingalsbe, H.; Alcorn, G.; Anderson, K.; Dahlen, D.

    1989-01-01

    Palo Verde Nuclear Generating Station (PVNGS) is operated by Arizona Public Service for a consortium of seven owners. The site consists of three identical single unit power plants. Each unit is a Combustion Engineering Series 80 pressurized water reactor (PWR) rated at 1270 Megawatts electric. The site is located 100 kilometers west of Phoenix, Arizona in the arid southwest desert region of the United States of America. Since the start up of Unit One in 1985, Palo Verde has aggressively pursued waste volume reduction. This includes a dry active waste (DAW) segregation program that locates and separates nonradioactive and reusable materials that have been mixed with the radioactive DAW. The DAW program is described in further detail in the paper

  9. Some Aspects of the State-of-the-Arts in Biomedical Science ...

    African Journals Online (AJOL)

    Summary: In the biomedical sciences, there is need to generate solutions for Africa's health and economic problems through the impact of university research. To guide organizational transformation, the author here presents some aspects of the state-of-the-arts of biomedical science research in advanced countries using a ...

  10. Direct Utilization Technology, State-of-the-Art

    Energy Technology Data Exchange (ETDEWEB)

    Ryan, Gene P

    1981-01-01

    This paper is intended to convey some ideas as to how a geothermal project develops, and to point out considerations that lead to the selection of the actual hardware. Today’s “state-of-the-art” provides a wide variety of materials and equipment that can be used in various combinations and configurations to perform a specific geothermal function. Most of the hardware is “off-the-shelf,” and there is seldom need for custom designed specialty items. To illustrate project development and equipment selection, an actual on-the-line geothermal application has been selected for discussion. This application involves space heating, potable hot water, and swimming pool heat for a small condominium. The four level condominium contains 11 units, a laundry, storage area, and a recreation room. The first thing discussed will be the geothermal well.

  11. Smart City Analytics: state of the art and future perspectives

    Directory of Open Access Journals (Sweden)

    Carlo Giovannella

    2014-05-01

    Full Text Available In accordance with a 'people centred' vision, this paper critically examines current approaches to smart cities benchmarking. In particular, by means of correlation analysis and Principal Component Analysis (PCA we put in evidence present limitations of city rankings and, as well, the emergence of different perspectives for data interpretations. To follow, a possible redesign of the 'Smart Cities Analytics' grounded on the traces left by individuals, is suggested. In particular, as an example, we focus on the potentiality offered by automatic text analysis to extract people perceptions and expectations that, in turns, demonstrate the need to integrate bottom-up and top-down approaches to city benchmarking. Finally a novel definition of smart city based on the territorial state of flow is proposed and, as a consequence, a novel path toward smart city benchmarking suggested.

  12. The nuclear in Italy - state of the art

    International Nuclear Information System (INIS)

    Schifano, F.; Ziller, T.

    2007-02-01

    This report aims to evaluate the italian situation in matter of the nuclear, following the referendum of 1987 which decided to stop the nuclear power plants in the country. The first part is devoted to the historical aspects of the nuclear sector in Italy. The second chapter presents the institutional and legislative framework. The third chapter discusses the today situation and the italian actors of the nuclear, from the radioactive wastes management and the dismantling of nuclear installations to the engineering service realized in other countries. It discusses also the research and development programs. The last chapter proposes perspectives of the debate around a possible restart of the nuclear activity in Italy

  13. Indexing of Popular Periodicals: The State of the Art

    Science.gov (United States)

    Aveney, Brian; Slade, Rod

    1978-01-01

    Nine indexing services of popular periodicals are discussed in terms of content, coverage, and characteristics: Access, Consumers Index, Index to Free Periodicals, New York Times Information Bank, Magazine Index, Monthly Periodicals Index, New Periodicals Index, Popular Periodical Index, and Readers Guide. A table indicates coverage for each index…

  14. EVALUATION OF THE STATE-OF-THE-ART CONTAMINATED SEDIMENT TRANSPORT AND FATE MODELING SYSTEM

    Science.gov (United States)

    Modeling approaches for evaluating the transport and fate of sediment and associated contaminants are briefly reviewed. The main emphasis is on: 1) the application of EFDC (Environmental Fluid Dynamics Code), the state-of-the-art contaminated sediment transport and fate public do...

  15. Mathematical E-Learning: State of the Art and Experiences at the Open University of Catalonia

    Science.gov (United States)

    Juan, A.; Huertas, A.; Steegmann, C.; Corcoles, C.; Serrat, C.

    2008-01-01

    In this article we present a review of the state of the art in mathematical e-learning and some personal experiences on this area developed during the last eleven years at the Open University of Catalonia (UOC), a completely online university located in Spain. The article discusses important aspects related to online mathematics courses offered in…

  16. The investment funds in carbon actives: state of the art

    International Nuclear Information System (INIS)

    Dominicis, A. de

    2005-01-01

    Since the beginning in 1999 of the first funds by the World Bank, the purchase mechanisms of carbon actives, developed and reached today more than 1,5 milliards of euros. The landscape is relatively concentrated, in spite of the numerous initiatives. The author presents the situation since 1999, the importance of the european governmental investors, the purchase mechanisms management and an inventory of the carbon actives purchases. (A.L.B.)

  17. State of the art in Europe on dose limit

    International Nuclear Information System (INIS)

    Munoz, M. J.; Amor, I.

    2002-01-01

    The process of setting up new radiological protection limits and requirements constitutes a long and laborious task, since the definition of the scientific bases that support them until their obliged fulfillment by adoption in national regulations. This paper analyzes the most important news contained in the Directive 96/29/Euratom, that are being transposed into Member States national legislations. Additionally the implications derived from the process are taken into consideration. Certain items as the new dose limits for exposed workers and public, the application of dose constraints, and the requirements for the protection of pregnant women and fetus, were object of special controversy during the development of the directive and they are not being transposed in a common way. So the different approach in the setting up of occupational doses can generate difficulties in the context of the european market. Through the directive constitutes the framework for the radiological protection in the European Union, there are certain difficulties for common implementation that will require subsequent explanations from the Commission and the Competent National Authorities. (Author)

  18. (Serious) Games Development: The State of the Art

    OpenAIRE

    Qi, Wen

    2014-01-01

    In this report, we give an overview of research and development of serious video games. Firstly, we briefly look at the history of (digital) video game. We discuss different types of video game and introduce the concept of serious game. In the following, we review the important aspects of technology development for general video games and serious games. We further discuss the critical elements of the game design. In the end, we summarize the components that form a successful serious game. Thi...

  19. State of the art of thermal-hydraulics of BWRs

    International Nuclear Information System (INIS)

    Rouhani, Z.

    1980-10-01

    The present report is a summary review of the developments in the field of thermal-hydraulics of Boiling Water Reactors. It covers briefly the development of BWR systems, including some comparison of the main features of the modern BWRs that are marketed by different vendors. The analytical aspects of BWR are also covered briefly with some remarks on the problem areas and limitations in this field. (author)

  20. Cultivating Demand for the Arts: Arts Learning, Arts Engagement, and State Arts Policy

    Science.gov (United States)

    Zakaras, Laura; Lowell, Julia F.

    2008-01-01

    To shed light on the decline in demand for the nonprofit arts, the authors describe what it means to cultivate demand for the arts, examine how well U.S. institutions are serving this function, and discuss whether it is in the public interest to make such cultivation a higher priority than it has been in the past. The authors propose that a strong…

  1. Sodium boiling studies at the CEA state of the art

    International Nuclear Information System (INIS)

    Girard, C.; Grand, D.; Papin, J.; Seiler, J.M.

    1979-08-01

    A description of the general approach used by the CEA to solve sodium boiling problems provides an understanding of our philosophy for code development. From the review of the main results obtained in the out-of-pile experiments, CFNa and CESAR, we deduce the main hypothesis of our basic model of sodium boiling. Our best estimate and simplified codes are briefly described and their results are compared with the experiments

  2. (Serious) Games Development: The State of the Art

    NARCIS (Netherlands)

    Qi, Wen

    2014-01-01

    In this report, we give an overview of research and development of serious video games. Firstly, we briefly look at the history of (digital) video game. We discuss different types of video game and introduce the concept of serious game. In the following, we review the important aspects of

  3. [Time for cluster C personality disorders: state of the art].

    Science.gov (United States)

    Hutsebaut, J; Willemsen, E M C; Van, H L

    Compared to cluster B personality disorders, the assessment and treatment of people with obsessive-compulsive, dependent, and avoidant personality disorders (cluster C) is given little attention in the field of research and clinical practice. Presenting the current state of affairs in regard to cluster C personality disorders. A systematic literature search was conducted using the main data bases. Cluster C personality disorders are present in approximately 3-9% of the general population. In about half of the cases of mood, anxiety, and eating disorders, there is co-morbid cluster C pathology. This has a major influence on the progression of symptoms, treatment effectiveness and potential relapse. There are barely any well conducted randomized studies on the treatment of cluster-C in existence. Open cohort studies, however, show strong, lasting treatment effects. Given the frequent occurrence of cluster C personality disorders, the burden of disease, associated societal costs and the prognostic implications in case of a co-morbid cluster C personality disorder, early detection and treatment of these disorders is warranted.

  4. The wind power state of the art and development outlooks

    International Nuclear Information System (INIS)

    Bal, J.L.

    2005-01-01

    This document presented during the Physics Summer school, deals with the wind power situation in Europe. The wind energy conversion in electric power is explained as the management and implementing of a wind site. The author discusses also the economy of the wind power and the market and development outlooks. (A.L.B.)

  5. Fecal microbiota transplantation: the state of the art

    Directory of Open Access Journals (Sweden)

    Stefano Di Bella

    2013-11-01

    Full Text Available Clostridium difficile infection (CDI is an emerging problem in terms of incidence, morbidity and mortality. Currently available treatment options are not always effective, especially in cases of recurrent/refractory or complicated CDI. The gut microbiota transplantation is a technique that has been sporadically practiced since the ‘50s, but its clinical efficacy has only recently been supported by scientific evidence. In the present article, we report the pathophysiological basis and the clinical indications of this technique that, in light of its low cost, and proven efficacy and safety, is likely to become part of the management guidelines of difficult cases of CDI in the near future.

  6. Vertex detectors: The state of the art and future prospects

    Energy Technology Data Exchange (ETDEWEB)

    Damerell, C.J.S. [Rutherford Appleton Laboratory, Didcot (United Kingdom)

    1997-01-01

    We review the current status of vertex detectors (tracking microscopes for the recognition of charm and bottom particle decays). The reasons why silicon has become the dominant detector medium are explained. Energy loss mechanisms are reviewed, as well as the physics and technology of semiconductor devices, emphasizing the areas of most relevance for detectors. The main design options (microstrips and pixel devices, both CCD`s and APS`s) are discussed, as well as the issue of radiation damage, which probably implies the need to change to detector media beyond silicon for some vertexing applications. Finally, the evolution of key performance parameters over the past 15 years is reviewed, and an attempt is made to extrapolate to the likely performance of detectors working at the energy frontier ten years from now.

  7. Vertex detectors: The state of the art and future prospects

    International Nuclear Information System (INIS)

    Damerell, C.J.S.

    1997-01-01

    We review the current status of vertex detectors (tracking microscopes for the recognition of charm and bottom particle decays). The reasons why silicon has become the dominant detector medium are explained. Energy loss mechanisms are reviewed, as well as the physics and technology of semiconductor devices, emphasizing the areas of most relevance for detectors. The main design options (microstrips and pixel devices, both CCD's and APS's) are discussed, as well as the issue of radiation damage, which probably implies the need to change to detector media beyond silicon for some vertexing applications. Finally, the evolution of key performance parameters over the past 15 years is reviewed, and an attempt is made to extrapolate to the likely performance of detectors working at the energy frontier ten years from now

  8. Epilogue: Peace Journalism – The State of the Art

    Directory of Open Access Journals (Sweden)

    Dov Shinar

    2007-04-01

    Full Text Available This epilogue aims at integrating the series of articles offered by the Toda Peace Journalism group in cco (4/2 2005; 5/2 2006; 6/1, 2007 into a framework designed to orient the reader, without repeating the arguments presented in the articles; to encourage instructors and students to use these materials; and to stimulate thinking on "where do we go next". Coherence is sought through looking at critical analyses of the conventional coverage of war and peace and at the promise and performance of Peace Journalism, analyzing epistemological and professional constraints, presenting ways to improve Peace Journalism concepts and practices, and offering an agenda and some development strategies. The initial premise that Peace Journalism (PJ is a mode of responsible and conscientious media representation of conflict, alternative to conventional coverage, develops into a summary of critical evaluations of such coverage, and of the efforts to conceptualize PJ. A discussion of the promises offered by PJ follows suit, including professional improvement, the enhancement of journalistic values, the provision of better public service, and the widening of scholarly and professional horizons. Also PJ performance is analyzed, suggesting some explanations for its lack of popularity and some of its built-in problems, such as in the debate over the tradition of objectivity and other normative alternatives. Epistemological and professional considerations converge in the discussion of needs for clearer formulation and application of concepts, expectations, and procedures, and for an agenda that includes the production of persuasive evidence of PJ value; for overcoming rejection by journalists, for avoiding self-manipulation in field staff-editor relations, and for encouraging the development of a media peace discourse.

  9. Pragmatics: The State of the Art: An Online Interview with Keith Allan

    Science.gov (United States)

    Allan, Keith; Salmani Nodoushan, Mohammad Ali

    2015-01-01

    This interview was conducted with Professor Keith Allan with the aim of providing a brief but informative summary of the state of the art of pragmatics. In providing answers to the interview questions, Professor Allan begins with a definition of pragmatics as it is practiced today, i.e., the study of the meanings of utterances with attention to…

  10. Organization Design: The Evolving State-of-the-Art

    DEFF Research Database (Denmark)

    Håkonsson, Dorthe Døjbak; Burton, Richard M.; Eriksen, Bo

    The design of organizations has been a prime characteristic of management theory and practice over the past several decades. However, there has been little change in the fundamental theory, principles and concepts of Organization Design since the introduction of contingency theory in the 1970s...... theory, principles and concepts, and on the basis of this benchmark publication, the editors will encourage researchers and students to further develop the field. The recent development in organization design has been sporadic; hence this book will be an important step in creating better theoretical....... Nevertheless, over the past 25 years organizational reality has changed dramatically with the advent of all sorts of communication systems, AI agents, information technology, knowledge management systems, and more. Therefore leading researchers in Organization Design who understand the situation have...

  11. Advanced public transportation systems : the state of the art

    Science.gov (United States)

    1991-03-01

    This report documents one of the early initiatives of UMTA's Advanced Public Transportation Systems (APTS) Program, a program structured to undertake research and development of innovative applications of advanced navigation, information, and communi...

  12. State of the art in bile analysis in forensic toxicology.

    Science.gov (United States)

    Bévalot, F; Cartiser, N; Bottinelli, C; Guitton, J; Fanton, L

    2016-02-01

    In forensic toxicology, alternative matrices to blood are useful in case of limited, unavailable or unusable blood sample, suspected postmortem redistribution or long drug intake-to-sampling interval. The present article provides an update on the state of knowledge for the use of bile in forensic toxicology, through a review of the Medline literature from 1970 to May 2015. Bile physiology and technical aspects of analysis (sampling, storage, sample preparation and analytical methods) are reported, to highlight specificities and consequences from an analytical and interpretative point of view. A table summarizes cause of death and quantification in bile and blood of 133 compounds from more than 200 case reports, providing a useful tool for forensic physicians and toxicologists involved in interpreting bile analysis. Qualitative and quantitative interpretation is discussed. As bile/blood concentration ratios are high for numerous molecules or metabolites, bile is a matrix of choice for screening when blood concentrations are low or non-detectable: e.g., cases of weak exposure or long intake-to-death interval. Quantitative applications have been little investigated, but small molecules with low bile/blood concentration ratios seem to be good candidates for quantitative bile-based interpretation. Further experimental data on the mechanism and properties of biliary extraction of xenobiotics of forensic interest are required to improve quantitative interpretation. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

  13. Denying Antecedents and Affirming Consequents: The State of the Art

    Directory of Open Access Journals (Sweden)

    David Godden

    2015-03-01

    Full Text Available Recent work on conditional reasoning argues that denying the antecedent [DA] and affirming the consequent [AC] are defeasible but cogent patterns of argument, either because they are effective, rational, albeit heuristic applications of Bayesian probability, or because they are licensed by the principle of total evidence. Against this, we show that on any prevailing interpretation of indicative conditionals, the premises of DA and AC arguments do not license their conclusions without additional assumptions. The cogency of DA and AC inferences rather depends on contingent factors extrinsic to, and independent of, what is asserted by DA and AC arguments.

  14. Intensity-modulated radiotherapy -the State of the Art

    International Nuclear Information System (INIS)

    Ling, C.

    2002-01-01

    Full text: In the last two decades of the last century, the development of three-dimensional conformal radiotherapy (3D-CRT) has substantially reduces the volume of critical organs irradiated to high doses, and has permitted the increase of tumor dose without concomitant increase in normal tissue complication. At Memorial Sloan Kettering Cancer Center, a clinical trial in cancer of the prostate has accrued >1600 patient and the prescription dose has been escalated to 81 Gy with 3D-CRT, and to 86.4 Gy using intensity modulated radiotherapy (IMRT), with promising results. 3D-CRT and IMRT involves the delineation of target and non-target structures from patient-specific 3D image data-sets (primarily CT, sometimes supplemented with MRI, PET etc.), the calculation and display of 3D dose distributions, the analysis and evaluation of structure-specific dose-volume data (DVH-dose volume histogram), radiation delivery with computer-controlled multileaf collimators (MLC), and treatment verification with electronic portal images. However, the dose distribution conformality achieved with 3D-CRT can be further improved by the use of computer-optimized IMRT. In addition, the treatment design phase of 3D-CRT involves several iterative steps and can be time-consuming, particularly when the anatomical geometry is complex. Thus, IMRT is an incremental advance from 3D-CRT with two key enhancements: 1) computerized iterative treatment plan optimization, and 2) the use of intensity-modulated radiation beams. To deliver the IM beams, one efficacious approach is to use MLC in the dynamic mode, using the so-called sliding-window technique, i.e. the leaves of the MLC are in motion while the radiation is being delivered. Since 1995, we have treated over 1500 patients with IMRT. This discussion shall describe the physical aspects of IMRT, emphasizing those features and benefits unique to this approach. Pertinent clinical results will also be briefly presented

  15. Exploring the Central Nervous System: methodological state of the art

    International Nuclear Information System (INIS)

    Darcourt, Jacques; Koulibaly, Pierre-Malick; Migneco, Octave

    2005-01-01

    The analysis of the clinical use of brain SPECT demonstrate a defacing between the methodological developments published recently and its current use in clinical practice. We review a description of recent methodological developments that could be useful in three classical clinical application: the diagnosis of Alzheimer's disease, the evaluation of dopaminergic neurotransmission in Parkinson's Disease and the study of epilepsy. In Alzheimer's disease the methods of spatial standardization and the comparison to a normative data base are more useful to observers that have the least experience and for this end methodological approaches that are oriented to routine work better and are simpler than SPM. Quantification is essential in the study of dopaminergic neurotransmission and the measurement of binding potential appears biased due to septal penetration, attenuation, diffusion and partial volume effect. Partial volume effect introduces most error and its correction is difficult because of the co registration precision required with magnetic resonance images. The study of epilepsy by subtraction of ictal and interictal SPECT has demonstrated its clinical value. It is a fusion of images operation that has now very well defined methods (au)

  16. State of the art: stem cells in equine regenerative medicine.

    Science.gov (United States)

    Lopez, M J; Jarazo, J

    2015-03-01

    According to Greek mythology, Prometheus' liver grew back nightly after it was removed each day by an eagle as punishment for giving mankind fire. Hence, contrary to popular belief, the concept of tissue and organ regeneration is not new. In the early 20th century, cell culture and ex vivo organ preservation studies by Alexis Carrel, some with famed aviator Charles Lindbergh, established a foundation for much of modern regenerative medicine. While early beliefs and discoveries foreshadowed significant accomplishments in regenerative medicine, advances in knowledge within numerous scientific disciplines, as well as nano- and micromolecular level imaging and detection technologies, have contributed to explosive advances over the last 20 years. Virtually limitless preparations, combinations and applications of the 3 major components of regenerative medicine, namely cells, biomaterials and bioactive molecules, have created a new paradigm of future therapeutic options for most species. It is increasingly clear, however, that despite significant parallels among and within species, there is no 'one-size-fits-all' regenerative therapy. Likewise, a panacea has yet to be discovered that completely reverses the consequences of time, trauma and disease. Nonetheless, there is no question that the promise and potential of regenerative medicine have forever altered medical practices. The horse is a relative newcomer to regenerative medicine applications, yet there is already a large body of work to incorporate novel regenerative therapies into standard care. This review focuses on the current state and potential future of stem cells in equine regenerative medicine. © 2014 EVJ Ltd.

  17. The state of the art in therapeutic nuclear medicine

    International Nuclear Information System (INIS)

    Allen, B.J.

    2001-01-01

    Radionuclide therapy can be curative or palliative in intent, and local or systemic in administration. Current therapy relies of beta emitting radioisotopes and selective carriers for the treatment of advanced tumours. The next generation of therapeutics may be alpha emitting radionuclides for subclinical, micrometastatic disease. Targeted Alpha therapy (TAT) offers the potential to inhibit the growth of micrometastases by selectively killing isolated and preangiogenic clusters of cancer cells. The practicality and efficacy of TAT has been tested by in vitro and in vivo studies many cancers. The first phase 1 clinical trial of TAT for leukaemia with Bi-213 has concluded at the Memorial Sloan Kettering Cancer Center, a phase 1 and 2 trial of intra-lesional TAT is ongoing at Duke University with At-211 labeled Mab against cystic glioma, and a phase 1 and 2 clinical trial for intra-lesional TAT with Bi-213 of subcutaneous secondary melanoma is underway at St George Hospital

  18. Fish stock assessments in the Mediterranean: state of the art

    Directory of Open Access Journals (Sweden)

    Jordi Lleonart

    2003-04-01

    Full Text Available The Mediterranean fisheries are characterised by fragmented fleets, usually composed by relatively small vessels, use of a large number of landing sites, multi-species catches and low CPUEs. Fish are commercialised mainly fresh and the prices are relatively high. These factors make it difficult and expensive to get extensive and reliable data time series and to get biological samples. Most of the fish caught in the Mediterranean are the recruits (0-1 year old of the main target species. Since the recruitment is much more uncertain than the abundance of the adult stages, the assessments are also more uncertain. Furthermore, no TAC or adaptive management is in place, so the administrations do not require monitoring in order to manage the fisheries. The continental shelf is narrow (with some exceptions and there are few stocks shared between two or more countries. Consequently, the international management structures have not been sufficiently enforced, and until recently no regular assessments were made by international working groups. These characteristics have led to a situation in which most of the assessments have been done in the framework of scientific projects, and therefore do not have continuity in time. The results of these assessments have rarely been incorporated in management.

  19. Information technology - the state of the art at pits

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, D

    1991-05-01

    Following a brief assessment of the current position within the British coal mining industry, the paper concludes that both the capacity and the capability exist to improve performance in order to produce coal to satisfy the market requirements. Information technology has a role to play in enabling the industry to realise its potential by providing accurate, up to date information which can be analysed to present a clear picture of problems, together with possible solutions and their costs and benefits. Production and resource management are two areas in which information technology IT can be particulary useful. The paper discusses the use of IT and the systems available with regard to: coal face production; drivages/heading information; planning and surveying; safety; plant and equipment management; materials purchase and stocking; manpower; deployment; proceeds and cost management and customer satisfaction. An appendix provides details of some of the computer programmes currently available for colliery plant management. 3 figs., 1 tab.

  20. GEOGRAPHY AND MOOC. ANALYSING THE STATE OF THE ART

    Directory of Open Access Journals (Sweden)

    Jesús Rodrigo Comino

    2014-12-01

    Full Text Available Different tools are applied to transmit Geography by universities, schools, and professionals... Nowadays, the university teaching is in a process of reflexion and evaluation about concrete pedagogical guidelines, which help to innovate and understand the actual exigencies of the information society. The use of TICs and the new methods in E-Learning are essentials, and for the Geography cannot be indifferent. This discipline was reconverted with the application of Moodle platforms or Webs 2.0. during the last decade, for example, to teach Geographical Information Systems (GIS or dense topics like Political Geography. Despite the relative novelty of MOOC (Massively Open Online Courses in the virtual academic world, today this tool represents a great achievement for the virtual and real time learning. COURSERA, EDX, FUTURE LEARN, IVERSITY, LYNDA, MOOC-Advisor Beta, OPEN2Study, SAYLOR.ORG and UDACITY are examples of international platforms, which work to design and prepare only specific courses. On the other hand, some Spanish MOOC platforms are AbiertaUGR, MiriadaX, REDUNX, UNED COMA and Unimooc. Furthermore, there are available courses about Geography (associated direct or indirectly. The creation of different topics with audio-visual materials and interesting elaborated texts, along three or four weeks (depend of course, free access and without economic costs are some characteristics of the MOOC. 

  1. State-of-the-art of development of floor spectra

    International Nuclear Information System (INIS)

    Singh, M.P.

    1984-01-01

    Floor spectra are used as seismic inputs for the design and qualification of subsystems and equipment. Until very recently, the time history analyses with single acceleration time history as input were very commonly used. However, this approach has been observed to give nonunique floor spectrum curves. Thus, as alternatives several direct approaches have been developed. The approaches which are based on the random vibration principles but employ response spectra directly have more rational appeal. Several such approaches are available. Four different approaches, employing the mode displacement and mode acceleration formulations, covering the proportionally as well as nonproportionally damped structures, are presented. The mode displacement formulations are most commonly used, although the mode acceleration formulations seem to be the better alternatives, both for the proportionally and nonproportionally damped structures. The need for the development of other forms of floor response spectra such as the relative velocity and relative acceleration spectra is also identified

  2. Radioanalytical investigations at FLNP JINR: State of the art

    International Nuclear Information System (INIS)

    Frontasyeva, M.

    2006-01-01

    In spite of competing non-nuclear analytical techniques (AAS, ICP-ES, ICP-MS, etc), reactor neutron activation analysis (NAA) continues to be the most powerful multi-element analytical technique used in geosciences, life sciences and material sciences. NAA, being a technique based on a physical principle different from those of other trace element techniques, should always be used, if feasible, when the need for better quantification of trace elements at ultra-low levels is desirable. In the certification of reference material, NAA as an accurate technique has played and is still playing a key role, even for elements where other techniques have replaced NAA in practical work. The radioanalytical complex REGATA at the IBR-2 reactor for more than 20 years of operation has become a source of analytical data for a considerable number of international projects carried out by specialists from the JINR member- and non-member states. Experience in applying conventional and epithermal neutron activation analysis for some challenging areas of studying the environment is reviewed. Special emphasis is made on collaborative projects with Turkish scientists

  3. Simulation of pollutants transfer in soils - State-of-the-art. State-of-the-art of the simulation of pollutants transfer in soils - Final report

    International Nuclear Information System (INIS)

    Bourgois, J.; Vaillant, Herve; Moszkowicz, P.; Alimi Ichola, Ibrahim; Foret, Suzanne

    1997-02-01

    Industrial companies use and produce numerous substances which can induce a pollution of our environment and especially of soil and groundwater. Thus, it's necessary to estimate the risk of an environmental impact from an accidental or chronic, real or potential pollution. Modelling, which allow the simulation of pollutant migration, can be used as a decision support system, either for the pollution control and prevention of the resource, or for the monitoring of the remediation of polluted sites. In the first part of this study, we established a state of the art on modelling of pollutant migration in soils. In the second part, we focused on the main simulation tools currently available on the market, and on the main agencies or laboratories working on this subject, especially in France. At the end of this study, we drew some conclusions concerning modelling of pollutant migration in soils and the main points which will form the subject of further studies: - sensitivity analysis of model to input parameters and ranking of the main parameters, - achievement of a database on the state of the art of the results on modelling realized on case studies, - development of a mobility indicator of pollutant in soil, - application field and relevance of the models. (authors)

  4. The state of the art in diagnostic nuclear medicine

    International Nuclear Information System (INIS)

    Scott, A.M.; University of Melbourne, VIC

    2001-01-01

    Recent improvements in the understanding of the physiologic and biologic mechanisms of health and disease have led to an expansion of nuclear medicine applications both in clinical studies and research. Advances in radiopharmaceutical development, instrumentation and computer processing have resulted in the implementation of Positron Emission Tomography for clinical studies, and improved treatments with radiopharmaceuticals particularly in cancer patients. There has also been an dramatic increase in the techniques available with nuclear medicine to detect and measure cellular biologic events in-vivo, which have important implications in clinical and basic science research. Nuclear medicine studies provide unique information on human physiology and remain an integral part of clinical medicine practice

  5. The state of the art in nuclear medicine

    International Nuclear Information System (INIS)

    Scott, A.M.

    1999-01-01

    Recent improvements in the understanding of the physiologic and biologic mechanisms of health and disease have led to an expansion of nuclear medicine applications both in clinical studies and research. Advances in radiopharmaceutical development, instrumentation and computer processing have resulted in the implementation of Positron Emission Tomography for clinical studies, and improved treatments with radiopharmaceuticals particularly in cancer patients. There has also been a dramatic increase in the techniques available with nuclear medicine to detect and measure cellular biologic events in-vivo, which have important implications in clinical and basic science research. Nuclear medicine studies provide unique information on human physiology and remain an integral part of clinical medicine practice

  6. Leadership and Fairness: The State of the Art

    NARCIS (Netherlands)

    D.L. van Knippenberg (Daan); D. de Cremer (David); B. van Knippenberg (Barbara)

    2006-01-01

    textabstractResearch in leadership effectiveness has paid less to the role of leader fairness than probably it should have. More recently, this has started to change. To capture this development, we review the empirical literature in leadership and fairness to define the field of leadership and

  7. Leadership and Fairness: The state of the art.

    NARCIS (Netherlands)

    van Knippenberg, D.; de Cremer, D.; van Knippenberg, B.M.

    2007-01-01

    Research in leadership effectiveness has paid less attention to the role of leader fairness than probably it should have. More recently, this has started to change. To capture this development, we review the empirical literature in leadership and fairness to define the field of leadership and

  8. Robotic thoracic surgery: The state of the art

    Science.gov (United States)

    Kumar, Arvind; Asaf, Belal Bin

    2015-01-01

    Minimally invasive thoracic surgery has come a long way. It has rapidly progressed to complex procedures such as lobectomy, pneumonectomy, esophagectomy, and resection of mediastinal tumors. Video-assisted thoracic surgery (VATS) offered perceptible benefits over thoracotomy in terms of less postoperative pain and narcotic utilization, shorter ICU and hospital stay, decreased incidence of postoperative complications combined with quicker return to work, and better cosmesis. However, despite its obvious advantages, the General Thoracic Surgical Community has been relatively slow in adapting VATS more widely. The introduction of da Vinci surgical system has helped overcome certain inherent limitations of VATS such as two-dimensional (2D) vision and counter intuitive movement using long rigid instruments allowing thoracic surgeons to perform a plethora of minimally invasive thoracic procedures more efficiently. Although the cumulative experience worldwide is still limited and evolving, Robotic Thoracic Surgery is an evolution over VATS. There is however a lot of concern among established high-volume VATS centers regarding the superiority of the robotic technique. We have over 7 years experience and believe that any new technology designed to make minimal invasive surgery easier and more comfortable for the surgeon is most likely to have better and safer outcomes in the long run. Our only concern is its cost effectiveness and we believe that if the cost factor is removed more and more surgeons will use the technology and it will increase the spectrum and the reach of minimally invasive thoracic surgery. This article reviews worldwide experience with robotic thoracic surgery and addresses the potential benefits and limitations of using the robotic platform for the performance of thoracic surgical procedures. PMID:25598601

  9. The Beijing Olympics and the art of nation-state maintenance

    NARCIS (Netherlands)

    de Kloet, J.; Pak Lei Chong, G.; Liu, W.

    2008-01-01

    This article maps out how different actors are involved in the promotion and mediation of the Olympics. It looks at the roles of, first, the nation-state, through an analysis of the promotional materials; second, the art world and global companies, through an analysis of the touring exhibition

  10. Current State-of-the-Art MRI for Comprehensive Evaluation of Potential Living Liver Donors.

    Science.gov (United States)

    Jhaveri, Kartik S; Guo, Lijun; Guimarães, Luís

    2017-07-01

    This review focuses on the role of state-of-the-art MRI-based techniques for comprehensive evaluation of living donors providing single-visit assessment of the liver vasculature via MR angiography, of the biliary tract via conventional T2-weighted MR cholangiography and T1-weighted gadoxetate disodium-enhanced MR cholangiography, and of hepatic steatosis via T2*-corrected multiecho chemical shift-based water-fat separation MRI and high-speed T2-corrected multiecho MR spectroscopy. By using current state-of-the-art techniques, MRI can provide a one-stop-shop method for evaluation of the potential living liver donors.

  11. Hypnotherapy in child psychiatry: the state of the art.

    Science.gov (United States)

    Huynh, Melanie Ekholdt; Vandvik, Inger Helene; Diseth, Trond H

    2008-07-01

    Children are more easily hypnotized than adults, and hypnotherapy as a method responds to the general developmental needs of children by addressing their ability for fantasy and imagination. Hypnotherapy and self-hypnosis are tools with which to assess and develop protective factors, and enhance positive adjustment. Meta-analyses and overviews have demonstrated the effect of hypnotherapy in paediatric disorders like asthma, chronic and acute pain, and in procedure-related distress in cancer patients. We wanted to examine the use and benefits of hypnotherapy when applied to child psychiatric disorders. A review of a literature search from PubMed, PsychINFO and the Cochrane databases revealed 60 publications, mostly case reports based on 2-60 cases, addressing the use of hypnotherapy in various child psychiatric conditions. Findings indicate that hypnotherapy may be useful for a wide range of disorders and problems, and may be particularly valuable in the treatment of anxiety disorders and trauma-related conditions. In conclusion, knowledge of hypnosis is useful in clinical practice and hypnotherapy may play an important role as an adjunctive therapy in cognitive-behavioural treatment and family therapy. Additional qualitative and quantitative studies are needed to assess the place for hypnosis/hypnotherapy in child psychiatry.

  12. Waste Management Strategies; the State of the Art

    DEFF Research Database (Denmark)

    Ghodrat, Alireza Ghasemi; Tabatabaei, Meisam; Aghbashlo, Mortaza

    2018-01-01

    The aim of this chapter is to present a short critical overview on the various municipal solid waste management (MSWM) technologies together with a glance at how conducting a feasibility study to choose the most suitable scenario for a particular region. In the first part, a conceptual approach...... to waste management followed by a valuable laconic review over the global status are presented. Short and must-know explanations about the various waste management technologies are provided in the second part within six subsections, i.e., materials recovery facility (MRF), refuse-derived fuel (RDF...

  13. Teaching PR Campaigns: The Current State of the Art.

    Science.gov (United States)

    Benigni, Vincent L.; Cameron, Glen T.

    1999-01-01

    Reports results from a national survey regarding courses on public-relations campaigns. Examines predominant pedagogical strategies and course-management text techniques used; intentions for the course; theory/research elements; the role of management skill and/or interpersonal dynamics in the student campaign both internally and externally, and…

  14. The reactor trainer: state-of-the-art classroom learning

    International Nuclear Information System (INIS)

    Stater, R.G.

    1996-01-01

    The Reactor Trainer is a professional, PC based, graphically enhanced, training resource specifically developed and customized for Class Room teaching of and learning about, reactor behavior. This unique, and focused, learning-target sets The Trainer apart from the panorama of the more common PC plant simulator. Its educational scope extends along a logical learning path, starting with important fundamental behavioral concepts of delayed neutrons, neutron multiplying factors, and reactor rate, moving to simple reactor transients in real time, and culminating with more complex operational evolutions. The Trainer empowers the Instructor with a dynamic Class Room demonstrator and the student with a superior hands-on learning tool. The Trainer's versatility encompasses a wide variety of educational needs, including initial operator training, requalification training, Shift Technical Advisor training, and other advanced or specialized training. In addition, The Reactor Trainer enhances prerequisite preparation of operator candidates for full-scale control room training and, in so doing, PC economics relieves full-scale simulator hours. (author)

  15. Measuring the State-of-the-Art in Laser Cut Quality

    OpenAIRE

    Pocorni, Jetro; Powell, John; Ilar, Torbjörn; Schwarz, A.; Kaplan, Alexander

    2013-01-01

    This paper discusses the strategy appropriate to investigating the state of the art of laser cutting from an industrial point of view. The importance of creating the samples in a high quality industrial environment is emphasised and preliminary results are presented.

  16. Dynamic Test of a Collision Post of a State-of-the-Art End Frame Design

    Science.gov (United States)

    2008-09-24

    In support of the Federal Railroad Administration's (FRA) : Railroad Equipment Safety Program, a full-scale dynamic test : of a collision post of a state-of-the-art (SOA) end frame was : conducted on April 16, 2008. The purpose of the test was to : e...

  17. Home Energy Systems: the State of the Art

    NARCIS (Netherlands)

    van de Kaa, G.; Ligtvoet, A.; Fens, T.W.; Herder, P.M.

    2014-01-01

    Smart home energy systems are technically possible to realize but are not yet applied on a large scale partly due to the fact that no common standards exist that enable interconnection of components that make up these smart energy systems. Multiple standards have been developed which are competing

  18. State-of-the-art of dentistry radiological services

    International Nuclear Information System (INIS)

    Yacovenco, Alejandro; Tauhata, Luiz; Infantosi, Antonio F.C.

    2001-01-01

    There are estimated that the dental X-ray participates today with about 20% of the total number of radiological exams accomplished at the country. According to data of the National Commission of Nuclear Energy (CNEN) more than 80% of the radiological exams are accomplished internationally with superior doses to the limits accepted. That picture, ally to an inefficient acting of X-ray apparels and the obtaining of radiological images of low diagnose quality did not suffer alterations for more than 20 years, in spite of a series of initiatives and attempts of the part of CNEN. Before this problematic one the work of implementation of the Quality Assurance System it was in evidence for the reached results. In an unpublished work, counting with the participation of the private initiative, begun with an understanding work and the surgeon's dentist's motivation, to give support for the procedures be it accomplished and basing on the control of the equipment and in the measure of the radiations in correct metrological way, it was gotten to modify the distribution of the dose absorbed in the entrance of the skin. As more important results stand out the improvement in the processing of the film in more than 46% of the dental clinics, reduction of the time of exhibition in more than 70% of the apparels of X-rays and a reduction of the dose of the order of 76%. (author)

  19. On the impact of optimisation models in maintenance decision making: the state of the art

    International Nuclear Information System (INIS)

    Dekker, Rommert; Scarf, Philip A.

    1998-01-01

    In this paper we discuss the state of the art in applications of maintenance optimisation models. After giving a short introduction to the area, we consider several ways in which models may be used to optimise maintenance, such as case studies, operational and strategic decision support systems, and give examples of each of them. Next we discuss several areas where the models have been applied successfully. These include civil structure and aeroplane maintenance. From a comparative point of view, we discuss future prospects

  20. Basics and state-of-the-art of modal testing

    Indian Academy of Sciences (India)

    In this paper, the current status of the technology of modal testing is reviewed with particular reference to the application of these methodsto the task of ensuring the optimum design of mechanical structures. Existing methods are summarised and new techniques which are currently under development are described.

  1. State of the art of cardiac pacemaker technology

    International Nuclear Information System (INIS)

    Lambeck, R.

    1978-01-01

    The development of cardiac pacemakers from fixed-frequency to demand pacemakers is reviewed. The latter is described in more detail with regard to its energy sources and its design. The use of radioactive energy sources is illustrated by the example of 238 Pu and 147 promethium and a comparison of the two radiation sources. (AJ) 891 AJ [de

  2. Conservation physiology of marine fishes: state of the art and prospects for policy

    NARCIS (Netherlands)

    Mckenzie, David J.; Axelsson, Michael; Chabot, Denis; Claireaux, Guy; Cooke, Steven J.; Corner, Richard A.; Boeck, De Gudrun; Domenici, Paolo; Guerreiro, Pedro M.; Hamer, Bojan; Jørgensen, Christian; Killen, Shaun S.; Lefevre, Sjannie; Marras, Stefano; Michaelidis, Basile; Nilsson, Göran E.; Peck, Myron A.; Perez-Ruzafa, Angel; Rijnsdorp, Adriaan D.; Shiels, Holly A.; Steffensen, John F.; Svendsen, Jon C.; Svendsen, Morten B.S.; Teal, Lorna R.; Meer, Van Der Jaap; Wang, Tobias; Wilson, Jonathan M.; Wilson, Rod W.; Metcalfe, Julian D.

    2016-01-01

    The state of the art of research on the environmental physiology of marine fishes is reviewed from the perspective of how it can contribute to conservation of knowledge for conservation of marine fishes is the limited knowledge base; international collaboration is needed to study the environmental

  3. [Kleine-Levin syndrome: state of the art].

    Science.gov (United States)

    Arnulf, I; Lecendreux, M; Franco, P; Dauvilliers, Y

    2008-01-01

    Kleine-Levin syndrome is a rare neurological disorder (1-2 cases per million inhabitants) primarily affecting young subjects. It is characterized by relapsing-remitting episodes of hypersomnia in association with cognitive and behavioral disturbances. Case-reports, small series, meta-analysis and a recent large, prospective trio study are consistent with a homogeneous, genuine disease entity. Patients are mostly male (68-78%) and adolescents (81%), with mean onset at 15 years (range 4-82 years). The first episode is triggered by an infection in 72% of patients. Patients experience an average of 7-19 episodes of 10-13 days each, relapsing every 3.5 months. Episodes recur more quickly in patients with childhood onset. The median disease course is 8-14 years, with longer course in men, in patients with hypersexuality, and when onset is after age 20. During episodes, all patients have hypersomnia (with sleep lasting 15-21 heures per day), cognitive impairment (apathy, confusion, slowness, amnesia) and a specific feeling of derealization (dreamy state, altered perception). Less frequently, patients experience hyperphagia (66%), hypersexuality (53%, principally men) and depressed mood (53%, predominantly women). Patients are remarkably similar to controls between episodes regarding sleep, vigilance, mood, and eating attitude, but have increased body mass index. Structural brain imaging, evaluation of the cerebrospinal fluid and serological inflammatory markers are unremarkable. EEG slowing is notable in 70% of cases during episodes, without epileptic activity. Sleep structure varies from harmonious hypersomnia to hypo-arousal with low sleep efficiency. The brain scintigraphy may show hypoperfusion, mostly focused on the thalamic, hypothalamic and fronto-temporal areas, especially when contrasted to images obtained between episodes. Newly identified factors include increased birth and developmental problems, Jewish heritage, genetics (5% multiplex families, suggesting

  4. State-of-the-art methodology of forest inventory: a symposium proceedings.

    Science.gov (United States)

    Vernon J. LaBau; Tiberius Cunia

    1990-01-01

    The state-of-the-art of forest inventory methodology, being closely integrated with the fast-moving, high technology computer world, has been changing at a rapid pace over the past decade. Several successful conferences were held during the 1980s with the goal and purpose of staying abreast of such change. This symposium was conceived, not just with the idea of helping...

  5. Conservation physiology of marine fishes: state of the art and prospects for policy

    DEFF Research Database (Denmark)

    McKenzie, David J.; Axelsson, Michael; Chabot, Denis

    2016-01-01

    The state of the art of research on the environmental physiology of marine fishes is reviewed from the perspective of how it can contribute to conservation of biodiversity and fishery resources. A major constraint to application of physiological knowledge for conservation of marine fishes is the ...

  6. State-of-the-art coordination chemistry of radioactive elements

    International Nuclear Information System (INIS)

    Kharisov, B I; Mendez-Rojas, Miguel A

    2001-01-01

    Modern procedures for the synthesis of coordination and organometallic compounds of actinides and technetium and the properties of these compounds are surveyed. Experimental techniques, including methods for the synthesis of actinide and technetium complexes from elemental metals (oxidative dissolution and direct electrosynthesis), salts and halide, carbonyl and other complexes are generalised. The bibliography includes 283 references.

  7. State of the art and development of radioactive material processing

    International Nuclear Information System (INIS)

    Muenze, R.; Hladik, O.

    1981-01-01

    The radioisotope production at the Rossendorf Nuclear Research Centre is reviewed, considering irradiation facilities (nuclear reactor, cyclotron), processing of activated materials, in particular of nuclear fuel after short-term irradiation and the chemical separation of fission products, and the production of sup(99m)Tc radiopharmaceuticals

  8. State-of-the-art of world nuclear power

    International Nuclear Information System (INIS)

    Margulova, T.Kh.

    1987-01-01

    World-wide development of nuclear power is reviewed in short. It noted, that by the 1970 the overall capacity of world nuclear power plants have been reached 24 GW and the cost of nuclear power became equal the cost of power generated at coal-fired stations. By the end of 1985 the LWR-type reactors generated 87 per sent of overale nuclear capacity. Especially considerable developmet of nuclear power have been achieved in France, where 50 per sent of power consumption is provided with nuclear power

  9. Current state of the art of HNF based composite propellants

    NARCIS (Netherlands)

    Ciucci, A.; Frota, O.; Welland, W.H.M.; Heijden, A.E.D.M. van der; Leeming, B.; Bellerby, J.M.; Brotzu, A.

    2004-01-01

    The main activities currently performed for the development of HNF-based propellants are presented. The objectives and approach adopted are described. The results obtained on the HNF decomposition mechanism and on the re- and co-crystallisation of HNF with potential propellant ingredients are

  10. State of the Art on Different Types of Electric Vehicles

    DEFF Research Database (Denmark)

    Soares, F. J.; Almeida, P.M. Rocha Almeida; Lopes, J.A. Pecas

    2013-01-01

    This chapter presents the main drivers and challenges for the large-scale adoption of Electric Vehicles (EV). The most important issues related with EV technology are also analyzed, namely, the charging infrastructures’ power levels, the type of plugs, the most common powertrain architectures, an...

  11. State of the art of reservoir sedimentation management in Spain

    OpenAIRE

    Avendaño Salas, Cándido; Sanz Montero, Esther; Cobo Rayán, Rafael

    2000-01-01

    Part of the total reservoir storage capacity in Spain (56 km3) is lost due to sedimentation processes taking place. Surveys carried out in 121 reservoirs indicate that 6% of them have undergone a capacity reduction of over 50%. However, most of them (81%) are characterised by a reservoir capacity loss below 20%. The most frequent methods used to control reservoir sedimentation in Spain fall into one of the following groups: reduction of sediment yield through basin management and removal of t...

  12. Brief review of the state of art in futsal.

    Science.gov (United States)

    Beato, Marco; Coratella, Giuseppe; Schena, Federico

    2016-04-01

    Futsal (the official name of "five side indoor football") has become very popular in recent years, and it counts more than 12 million players in over 100 countries. Futsal is played on a field of 40 x 20 m between 2 teams of 5 players, (four outfield players and the goalkeeper). Despite its rise of popularity, the number of scientific studies related to training modalities as the demands of the match or factors linked to the performance, are quite limited. This brief review aims to explore the few papers published on futsal, taking in consideration some conclusions that can be drawn from previous studies related only to futsal and indoor football players. Future studies should examine the physical demands during the matches, the variation of physical performances during the season and compare different classic training modalities to sport specific exercises, aiming to improve the current knowledge for coaching.

  13. State-of-the-art imaging of peritoneal carcinomatosis

    International Nuclear Information System (INIS)

    Pfannenberg, C.; Schwenzer, N.F.; Bruecher, B.L.

    2012-01-01

    Imaging studies are essential in the evaluation of patients with suspected or known peritoneal malignancy. Despite major advances in imaging technology in the last few years, the early and adequate detection of a peritoneal dissemination remains challenging because of the great variety in size, morphology and location of the peritoneal lesions. New therapeutic approaches in peritoneal-based neoplasms combining cytoreductive surgery and peritonectomy with hyperthermic intraoperative chemotherapy (HIPEC) suggest improved long-term survival, provided that a complete (macroscopic) cytoreduction is achieved. The preoperative radiological assessment of the extent and distribution of peritoneal involvement plays a vital role in the patient selection process. Despite its known limited accuracy in detecting small peritoneal lesions and the involvement of the small bowel/mesentery, contrast-enhanced MDCT remains the standard imaging modality in the assessment of peritoneal carcinomatosis. MRI, especially with diffusion-weighted images, and FDG-PET/CT are promising methods for the evaluation of peritoneal carcinomatosis with superior results in recent studies, but still have a limited role in selected cases because of high costs and limited availability. Generally, to obtain the most precise readings of peritoneal carcinomatosis, an optimized examination protocol and dedicated radiologists with a deep knowledge of peritoneal pathways and variable morphologies of peritoneal disease are required. (orig.)

  14. State-of-the-Art-Review of Collapsible Soils

    Directory of Open Access Journals (Sweden)

    A. A. AL-Rawas

    2000-12-01

    Full Text Available Collapsible soils are encountered in arid and semi-arid regions. Such soils cause potential construction problems due to their collapse upon wetting. The collapse phenomenon is primarily related to the open structure of the soil. Several soil collapse classifications based on parameters such as moisture content, dry density, Atterberg limits and clay content have been proposed in the literature as indicators of the soil collapse potential. Direct measurement of the magnitude of collapse, using laboratory and/or field tests, is essential once a soil showed indications of collapse potential. Treatment methods such as soil replacement, compaction control and chemical stabilization showed significant reduction in the settlement of collapsible soils. The design of foundations on collapsible soils depends on the depth of the soil, magnitude of collapse and economics of the design. Strip foundations are commonly used when collapsing soil extends to a shallow depth while piles and drilled piers are recommended in cases where the soil extends to several meters. This paper provides a comprehensive review of collapsible soils. These include the different types of collapsible soils, mechanisms of collapse, identification and classification methods, laboratory and field testing, treatment methods and guidelines for foundation design.

  15. Environmental aspects of nuclear power: state- of-the-art

    International Nuclear Information System (INIS)

    Ibrahim, Y.M.; Hussein, A.S.

    2007-01-01

    Nuclear power is an environmentally benign source, as it does not contribute either to global warming or acid rains.However, nuclear power plants do release radioactive gaseous and liquid effluents, and dispose solid wastes. Nuclear power currently provides 6% of global energy and about 16% of global electricity supply. Up to March 2006 there were 441 nuclear power reactors in operation representing a total capacity of more than 368 gigawatt electricity .World Energy Council projects growth of global use of electricity will increase from 1990 levels by 50% to 75% by the year 2020. At the same time, there are indications that the continued use of traditional fissile fuel will have undesirable impacts on the world climate Nuclear power will have to play an increasingly impact role in long-term energy of the world to achieve the objectives of sustainable develop .This paper presents the recent environmental aspects of nuclear power

  16. State of the art of sonic boom modeling

    Science.gov (United States)

    Plotkin, Kenneth J.

    2002-01-01

    Based on fundamental theory developed through the 1950s and 1960s, sonic boom modeling has evolved into practical tools. Over the past decade, there have been requirements for design tools for an advanced supersonic transport, and for tools for environmental assessment of various military and aerospace activities. This has resulted in a number of advances in the understanding of the physics of sonic booms, including shock wave rise times, propagation through turbulence, and blending sonic boom theory with modern computational fluid dynamics (CFD) aerodynamic design methods. This article reviews the early fundamental theory, recent advances in theory, and the application of these advances to practical models.

  17. Reduction of nitrogen: Finnish state of the art

    International Nuclear Information System (INIS)

    Maekelae, Markku

    1987-01-01

    In Finland nitrogen has been considered of importance as a limiting growth factor in some coastal areas and heavily polluted lakes. For the present, however, the usefulness of nitrogen removal in municipal wastewater treatment has not beep clear enough and requirements concerning removal of total nitrogen have not been set. The need for nitrogen removal depends mainly on the local conditions. On the coastal regions, nitrogen removal should be started first in the biggest of those municipalities which are loading the Gulf of Finland and the Archipelago Sea. The city of Helsinki has to be prepared for nitrogen removal before the end of the next decade. The adverse effects of ammonia are apparent in many inland water courses. In recent years reduction of ammonia nitrogen in wastewater treatment has been required in some cases, mainly in order to prevent oxygen depletion caused by nitrification in receiving waters. Other important reasons for ammonia reduction have been the adverse effects of ammonia in water supply and the toxic effects of molecular ammonia on fish. In practice, ammonia removal has been performed by nitrification in connection with the activated sludge process. The choice of process combinations and design values have always been based on pilot plant or full scale experiments. In order to reach a sludge retention time long enough during the cold season, the design values of sludge load have been 0.06-0.08 kg BOD 7 /kg MLSS·d in combined carbon oxidation and nitrification processes. At new nitrification plants, denitrification has been used for diminishing the operation costs. (author)

  18. Diagnosis and management of resistant hypertension: state of the art.

    Science.gov (United States)

    Wei, Fang-Fei; Zhang, Zhen-Yu; Huang, Qi-Fang; Staessen, Jan A

    2018-04-26

    Resistant hypertension is defined as a lack of ambulatory blood pressure response to optimized medical treatment after exclusion of secondary hypertension in patients who are fully adherent to antihypertensive therapy. Patients with resistant hypertension are at high risk of complications, particularly cardiovascular events, and optimization of medical treatment remains the cornerstone of their management. Such optimization should be based on simple algorithms and include the use of aldosterone antagonists. The available data from clinical trials do not support the use of device-based approaches such as renal denervation, baroreflex activation therapy or arteriovenous anastomosis for the treatment of resistant hypertension in the majority of patients. Therefore, device treatment remains a last-resort for patients with truly resistant hypertension in the context of clinical research in highly skilled tertiary referral centres. Future research should focus on improving understanding of the intrinsic (physiological and psychological factors) and extrinsic (environmental stressors) mechanisms that contribute to a lack of response to blood-pressure-lowering drugs in adherent patients. The use of biomarkers to identify patients with early target organ damage and new technologies, such as renal nerve stimulation, to predict blood pressure responses to renal denervation could aid the selection of patients who might benefit from device therapies.

  19. State of the art of multicell SC cavities and perspectives

    International Nuclear Information System (INIS)

    Peter Kneisel

    2002-01-01

    Superconducting cavity technology has made major progresses in the last decade with the introduction of high purity niobium on an industrial scale and, at the same time, by an improved understanding of the limiting processes in cavity performance, such as multipacting, field emission loading and thermal break-down. Multicell niobium cavities for beta = 1 particle acceleration, e.g. for the TESLA project, are routinely exceeding gradients of Eacc = 20 MV/m after the application of surface preparation techniques such as buffered chemical polishing or electropolishing, high pressure ultrapure water rinsing, UHV heat treatment and clean room assembly. The successes of the technology for beta = 1 accelerators has triggered a whole set of possible future applications for beta < 1 particle acceleration such as spallation neutron sources (SNS, ESS), transmutation of nuclear waste (TRASCO, ASH) or rare isotopes (RIA). The most advanced of these projects is SNS now under construction at Oak Ridge National Laboratory. This paper will review the technical solutions adopted to advance SRF technology and their impact on cavity performance, based on the SNS prototyping efforts. 2K at these high gradients are no longer out of reach. For the accelerator builder the challenge remains to come up with a good and reasonable design, which takes into account the status of the technology and does not over-estimate the achievable cavity performances in a large assembly such as, e.g., a multi-cavity cryo-module. In the following the criteria for multi-cell sc cavity design are reviewed and it is attempted to give a snapshot of the present status of multi-cell cavity performances

  20. State of the Art of International Public Relations Education.

    Science.gov (United States)

    Wakefield, Gay; And Others

    To examine aspects of the political/economic/social/cultural environments (PESCE) affecting international public relations and their significance to the future of public relations practitioners, this paper reviews the 1980s literature regarding the current and projected trends in international public relations practice and their implications for…

  1. Current state of the art of blood cell labeling

    International Nuclear Information System (INIS)

    Srivastava, S.C.; Straub, R.F.; Meinken, G.E.; Gil, M.C.

    1985-01-01

    An update on some recent developments in the area of blood cell labeling is provided. Specific topics covered include red cell labeling with /sup 99m/Tc, platelet labeling using an antiplatelet monoclonal antibody, and the labeling of leukocytes with /sup 99m/Tc. Mechanistic information, where available, is discussed. A critical evaluation of current techniques, their pitfalls as well as advantages, and the problems that remain to be resolved, is presented. The promise shown by recent results using the antibody approach for cell labeling is emphasized. An assessment of the progress made in these areas is presented. 38 refs., 10 figs., 6 tabs

  2. Cold forming of aluminium - State of the art

    DEFF Research Database (Denmark)

    Bay, Niels

    1997-01-01

    The ongoing development of cold forging technology has been manifested lately by the increasing application of components in cold forged aluminium alloys. Applying precipitation hardening alloys components with great strength/weight ratio can be produced with a strength comparable...... to that of unalloyed steel. After description of the different types of alloys and their individual properties and applications, the special requirements for tool design by cold forging in aluminium is discussed. Finally, a large number of industrial examples on cold forged aluminium components are presented. (C) 1997...

  3. State of the art : Recycling of EPDM rubber vulcanizates

    NARCIS (Netherlands)

    Sutanto, P; Picchioni, E; Janssen, LPBM; Dijkhuis, KAJ; Dierkes, WK; Noordermeer, JWM

    Since the past few decades, environmental issues have become a serious concern in society. It is a requisite for the industry to minimize waste, in order to protect the environment from being polluted. The term waste here comprises processing waste and post-consumer waste. The amount of processing

  4. The state of the art of numerical modeling of thermohydrologic flow in fractured rock masses

    International Nuclear Information System (INIS)

    Wang, J.S.Y.; Sterbentz, R.A.; Tsang, C.F.

    1982-01-01

    The state of the art of numerical modeling of thermohydrologic flow in fractured rock masses is reviewed and a comparative study is made of several models which have been developed in nuclear waste isolation, geothermal energy, ground water hydrology, petroleum engineering, and other geologic fields. The general review is followed by individual summaries of each model and the main characteristics of its governing equations, numerical solutions, computer codes, validations, and applications

  5. Neotectonics of coastal Jeffara (southern Tunisia): State of the art

    Science.gov (United States)

    Ghedhoui, Rim; Deffontaines, Benoît; Rabia, Mohamed Chedly

    2016-04-01

    Helped by the studies and results of previous researchers, we herein study the neotectonic of the coastal Jeffara with the input of numerous 2D reflection seismic profiles onshore, combined with Digital Elevation Model analyses (issued from SRTM) and field works. Acquired and available data were then integrated within a GIS Geodatabase, where Jerba, Zarzis and Jorf appear to be part of a N-S pull-apart basin within a NW-SE transtensive right-lateral major fault zone. Our structural geologic and geomorphologic analyses confirm and prove the presence of NNW-SSE right-lateral en-echelon tension gashes, NW-SE aligned salt diapirs, numerous active folds offsets, en-echelon folds, and so-on… They are associated with this major right-lateral NW-SE transtensive major coastal Jeffara fault zone that affect the Holocene and the Villafranchian deposits. We therefore confirm herein a new structural geodynamic Jeffara model, due to the post Lower Cretaceous northward migration of northern African to the Eurasian plates, this NW-SE transtensive fault zone is interpreted as a part of the southern branch of the eastward Sahel block extrusion toward the free Mediterranean Sea boundary. Therefore this geodynamic movement may explain the presence, offshore, of small elongated NW-SE, N-S and NE-SW transtensive basins and grabens with petroleum interest. To conclude, at the regional scale, the structural geomorphologic approach combined with both field work and 2D reflection seismic profile analyses appear to be an excellent tool to prove and confirm the NW-SE right-lateral transtensive extrusion fault zone of the coastal Jeffara.

  6. State of the art of radiation therapy for esophageal cancer

    International Nuclear Information System (INIS)

    Itasaka, Satoshi

    2014-01-01

    Radiation therapy has a critical role in the treatment of esophageal cancer. To improve the treatment outcome of radiotherapy, not only strengthening the treatment intensity but also decreasing the long term toxicity is needed. To reduce the long term cardiopulmonary toxicity of chemoradiation, JCOG is now running a clinical trial which combines three dimensional conformal radiation therapy (3D-CRT) and mild irradiation dose. New techniques of radiation therapy, such as intensity modulated radiation therapy (IMRT) or particle therapy are also promising in both treatment intensity and decreased toxicity. (author)

  7. Buckling of Carbon Nanotubes: A State of the Art Review

    Science.gov (United States)

    Shima, Hiroyuki

    2011-01-01

    The nonlinear mechanical response of carbon nanotubes, referred to as their “buckling" behavior, is a major topic in the nanotube research community. Buckling means a deformation process in which a large strain beyond a threshold causes an abrupt change in the strain energy vs. deformation profile. Thus far, much effort has been devoted to analysis of the buckling of nanotubes under various loading conditions: compression, bending, torsion, and their certain combinations. Such extensive studies have been motivated by (i) the structural resilience of nanotubes against buckling and (ii) the substantial influence of buckling on their physical properties. In this contribution, I review the dramatic progress in nanotube buckling research during the past few years. PMID:28817032

  8. Biomarkers of exposure and dose: State of the art

    International Nuclear Information System (INIS)

    Brooks, A.L.

    2001-01-01

    Biomarkers provide methods to measure changes in biological systems and to relate them to environmental insults and disease processes. Biomarkers can be classified as markers of exposure and dose, markers of sensitivity, and markers of disease. It is important that the differences and applications of the various types of biomarkers be clearly understood. The military is primarily interested in early biomarkers of exposure and dose that do not require high levels of sensitivity but can be used to rapidly triage war fighters under combat or terrorist conditions and determine which, if any, require medical attention. Biomarkers of long-term radiation risk represent the second area of interest for the military. Biomarkers of risk require high sensitivity and specificity for the disease and insult but do not require rapid data turn around. Biomarkers will help provide information for quick command decisions in the field, characterise long-term troop risks and identify early stages of radiation-induced diseases. This information provides major positive reassurances about individual exposures and risk that will minimise the physical and psychological impact of wartime radiation exposures. (author)

  9. PERCEPTION OF PATIENTS ON ART ABOUT THE SERVICES AVAILED AT LINK ART CENTERS IN SELECTED STATES OF INDIA

    Directory of Open Access Journals (Sweden)

    Ruchi Sogarwal

    2012-07-01

    Full Text Available Objectives: The present study was attempted to assess the perception of patients on ART about the services availed at Link ART Centers (LAC in selected states of India. Methods: A total of 354 PLHAs were selected from 20 systematic randomly selected LACs from Gujarat, Maharashtra, Rajasthan and Uttar Pradesh. Results: Study reveals that majority (97% of the patients seeking services from LACs made regular visits to the center. It was found that 57 percent of the patients had spent less than 100 rupees during the last visit. More than 95 percent of the clients reported waiting time less than 30 minutes for availing counseling and collection of drugs at LACs. The mean±SD score of patient’s level of satisfaction with the services availed at LACs is 4.7±0.5. Conclusions: Study concludes that while majority of the patients were satisfied with the services at LACs, there is need of strengthening the existing ‘package’ of services in these centers and expand the network across the country.

  10. PERCEPTION OF PATIENTS ON ART ABOUT THE SERVICES AVAILED AT LINK ART CENTERS IN SELECTED STATES OF INDIA

    Directory of Open Access Journals (Sweden)

    Ruchi Sogarwal

    2012-06-01

    Full Text Available Objectives: The present study was attempted to assess the perception of patients on ART about the services availed at Link ART Centers (LAC in selected states of India. Methods: A total of 354 PLHAs were selected from 20 systematic randomly selected LACs from Gujarat, Maharashtra, Rajasthan and Uttar Pradesh. Results: Study reveals that majority (97% of the patients seeking services from LACs made regular visits to the center. It was found that 57 percent of the patients had spent less than 100 rupees during the last visit. More than 95 percent of the clients reported waiting time less than 30 minutes for availing counseling and collection of drugs at LACs. The mean±SD score of patient’s level of satisfaction with the services availed at LACs is 4.7±0.5. Conclusions: Study concludes that while majority of the patients were satisfied with the services at LACs, there is need of strengthening the existing ‘package’ of services in these centers and expand the network across the country.

  11. Clinical management of achalasia: current state of the art

    Directory of Open Access Journals (Sweden)

    Krill JT

    2016-04-01

    Full Text Available Joseph T Krill, Rishi D Naik, Michael F Vaezi Division of Gastroenterology, Hepatology, and Nutrition, Center for Swallowing and Esophageal Disorders, Vanderbilt University Medical Center, Nashville, TN, USA Abstract: Achalasia is a primary disorder of esophageal motility. It classically presents with dysphagia to both solids and liquids but may be accompanied by regurgitation and chest pain. The gold standard for the diagnosis of achalasia is esophageal motility testing with manometry, which often reveals aperistalsis of the esophageal body and incomplete lower esophageal sphincter relaxation. The diagnosis is aided by complimentary tests, such as esophagogastroduodenoscopy and contrast radiography. Esophagogastroduodenoscopy is indicated to rule out mimickers of the disease known as “pseudoachalasia” (eg, malignancy. Endoscopic appearance of a dilated esophagus with retained food or saliva and a puckered lower esophageal sphincter should raise suspicion for achalasia. Additionally, barium esophagography may reveal a dilated esophagus with a distal tapering giving it a “bird’s beak” appearance. Multiple therapeutic modalities aid in the management of achalasia, the decision of which depends on operative risk factors. Conventional treatments include medical therapy, botulinum toxin injection, pneumatic dilation, and Heller myotomy. The last two are defined as the most definitive treatment options. New emerging therapies include peroral endoscopic myotomy, placement of self-expanding metallic stents, and endoscopic sclerotherapy. Keywords: achalasia, pseudoachalasia, pneumatic dilation, Heller myotomy, botulinum toxin injection, peroral endoscopic myotomy

  12. Maintenance of Marine Structures: A State of the Art Summary

    Science.gov (United States)

    1993-05-01

    Edward K(adala Mr. David L Stocks Mr. William Hanzelek Mr. Allen H. Enose Mr. Peter Tkmonin MILTAY SAUIECOMANDMRTIEA U. S. COAST GUARD Mr. Robert E. Van... Musher of areu block, III-Nwmber of usrew block e block i NI-’nwaber of cycles -. Azifre da/dn-F(K.,-K..) or the crack growth rate is some function of

  13. State of the art of dynamic software updating in Java

    DEFF Research Database (Denmark)

    Gregersen, Allan Raundahl; Rasmussen, Michael; Jørgensen, Bo Nørregaard

    2014-01-01

    The dynamic software updating system JRebel from Zeroturnaround has proven to be an efficient mean to improve developer productivity, as it allows developers to change the code of their applications while developing and testing them. Hence, developers no longer have to go through the tedious cycle......! with JRebel. The successful integration of these two systems will set a new standard for dynamic software updating in Java....

  14. The diagnosis of plant pathogenic bacteria: a state of art.

    Science.gov (United States)

    Scala, Valeria; Pucci, Nicoletta; Loreti, Stefania

    2018-03-01

    Plant protection plays an important role in agriculture for the food quality and quantity. The diagnosis of plant diseases and the identification of the pathogens are essential prerequisites for their understanding and control. Among the plant pests, the bacterial pathogens have devastating effects on plant productivity and yield. Different techniques (microscopy, serology, biochemical, physiological, molecular tools and culture propagation) are currently used to detect and identify bacterial pathogens. Detection and identification are critical steps for the appropriate application of phytosanitary measures. The "harmonization of phytosanitary regulations and all other areas of official plant protection action" mean the good practices for plant protection and plant material certification. The prevention of diseases progression and spread by early detection are a valuable strategy for proper pest management and disease control. For this purpose, innovative methods aim achieving results within a shorter time and higher performance, to provide rapidly, accurately and reliably diagnosis. In this review, we focus on the techniques for plant bacterial diagnosis and on the regulations for harmonizing plant protection issue.

  15. [Principles of Teaching in Surgery - State of the Art].

    Science.gov (United States)

    Busemann, A; Patrzyk, M; Busemann, C; Heidecke, C-D

    2016-06-01

    Ten to 15 years ago the number of applications for a surgical residency position was very much larger than the positions available. Today, this situation has clearly reversed itself as indicated through a noticeable deficit in recruits. The decision to become a surgeon has become more uncommon. This can be blamed upon not only the demotivatingly viewed "work-life imbalance" associated with being a surgeon, but also on the basically non-inspiring training process during medical school. Due to the fact that university educators/instructors are not fundamentally trained teachers, they often fail in their capacity to convey their extensive knowledge to medical students and potentially future surgical residents. The quality of primary as well as postgraduate training is an important central factor in the effort to once again restore the attractive image of surgery within the realm of the medical disciplines. This paper presents an overview of the basic modern training concepts by which every surgeon should be able to effectively convey knowledge and practical skills. Furthermore, this work should inspire a more intensive interest in clinical graduate and postgraduate education. Due to the hand in hand relationship, this manuscript does not differentiate between student teaching and postgraduate training. Georg Thieme Verlag KG Stuttgart · New York.

  16. Complications of Cushing's syndrome: state of the art.

    Science.gov (United States)

    Pivonello, Rosario; Isidori, Andrea M; De Martino, Maria Cristina; Newell-Price, John; Biller, Beverly M K; Colao, Annamaria

    2016-07-01

    Cushing's syndrome is a serious endocrine disease caused by chronic, autonomous, and excessive secretion of cortisol. The syndrome is associated with increased mortality and impaired quality of life because of the occurrence of comorbidities. These clinical complications include metabolic syndrome, consisting of systemic arterial hypertension, visceral obesity, impairment of glucose metabolism, and dyslipidaemia; musculoskeletal disorders, such as myopathy, osteoporosis, and skeletal fractures; neuropsychiatric disorders, such as impairment of cognitive function, depression, or mania; impairment of reproductive and sexual function; and dermatological manifestations, mainly represented by acne, hirsutism, and alopecia. Hypertension in patients with Cushing's syndrome has a multifactorial pathogenesis and contributes to the increased risk for myocardial infarction, cardiac failure, or stroke, which are the most common causes of death; risks of these outcomes are exacerbated by a prothrombotic diathesis and hypokalaemia. Neuropsychiatric disorders can be responsible for suicide. Immune disorders are common; immunosuppression during active disease causes susceptibility to infections, possibly complicated by sepsis, an important cause of death, whereas immune rebound after disease remission can exacerbate underlying autoimmune diseases. Prompt treatment of cortisol excess and specific treatments of comorbidities are crucial to prevent serious clinical complications and reduce the mortality associated with Cushing's syndrome. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Clinical management of achalasia: current state of the art

    Science.gov (United States)

    Krill, Joseph T; Naik, Rishi D; Vaezi, Michael F

    2016-01-01

    Achalasia is a primary disorder of esophageal motility. It classically presents with dysphagia to both solids and liquids but may be accompanied by regurgitation and chest pain. The gold standard for the diagnosis of achalasia is esophageal motility testing with manometry, which often reveals aperistalsis of the esophageal body and incomplete lower esophageal sphincter relaxation. The diagnosis is aided by complimentary tests, such as esophagogastroduodenoscopy and contrast radiography. Esophagogastroduodenoscopy is indicated to rule out mimickers of the disease known as “pseudoachalasia” (eg, malignancy). Endoscopic appearance of a dilated esophagus with retained food or saliva and a puckered lower esophageal sphincter should raise suspicion for achalasia. Additionally, barium esophagography may reveal a dilated esophagus with a distal tapering giving it a “bird’s beak” appearance. Multiple therapeutic modalities aid in the management of achalasia, the decision of which depends on operative risk factors. Conventional treatments include medical therapy, botulinum toxin injection, pneumatic dilation, and Heller myotomy. The last two are defined as the most definitive treatment options. New emerging therapies include peroral endoscopic myotomy, placement of self-expanding metallic stents, and endoscopic sclerotherapy. PMID:27110134

  18. A Comparative Analysis of Internal Communication and Public Relations Audits. State of the Art.

    Science.gov (United States)

    Dozier, David M.; Hellweg, Susan A.

    A review of current literature regarding the state of the art in the conduct of internal communication and public relations audits by public relations practitioners reveals that these two related measurement activities are of considerable importance to the practice of public relations. Public relations audits are concerned with exploratory…

  19. State-of-the-Art Developments of Acoustic Energy Transfer

    Directory of Open Access Journals (Sweden)

    Md Rabiul Awal

    2016-01-01

    Full Text Available Acoustic energy transfer (AET technology has drawn significant industrial attention recently. This paper presents the reviews of the existing AETs sequentially, preferably, from the early stage. From the review, it is evident that, among all the classes of wireless energy transfer, AET is the safest technology to adopt. Thus, it is highly recommended for sensitive area and devices, especially implantable devices. Though, the efficiency for relatively long distances (i.e., >30 mm is less than that of inductive or capacitive power transfer; however, the trade-off between safety considerations and performances is highly suitable and better than others. From the presented statistics, it is evident that AET is capable of transmitting 1.068 kW and 5.4 W of energy through wall and in-body medium (implants, respectively. Progressively, the AET efficiency can reach up to 88% in extension to 8.6 m separation distance which is even superior to that of inductive and capacitive power transfer.

  20. Fundamentals - state of the art of radiation techniques

    International Nuclear Information System (INIS)

    Wogman, N.A.

    1982-01-01

    In minerals exploration and extraction, nuclear techniques have several advantages. The techniques are elementally specific and their exploration range varies from a few millimeters in average rock formations to more than a meter. Because of the heterogeneous disposition of minerals and difficult environments in which measurements are required (in boreholes, on conveyor belts, in bunkers), interrogating techniques are required which exhibit both elemental specificity and range. It is for these fundamental reasons that nuclear techniques are the only possible techniques which satisfy all requirements. A variety of techniques have been developed and used. These are based on energy dispersive x-ray fluorescence (EDXRF), measurement of natural gamma-ray radiation, gamma-ray attenuation and scattering, and on neutron interactions. This paper discusses the fundamentals of these four techniques and their applications. A table is also provided listing some existing selected applications of nuclear techniques in mineral exploration, mining and processing

  1. Plugging wells for abandonment: a state-of-the-art study and recommended procedures

    International Nuclear Information System (INIS)

    Herndon, J.; Smith, D.K.

    1976-09-01

    The state-of-the-art of borehole plugging of abandoned oil wells and the tools and materials used are discussed. Special problems encountered are considered and several case studies are outlined. The special procedures which must be followed if the plugged borehole is to be considered as a repository for radioactive wastes are discussed and special recommendations are made. A state-by-state summary is given of the regulatory requirements for borehole plugging

  2. State of the art of produced water treatment.

    Science.gov (United States)

    Jiménez, S; Micó, M M; Arnaldos, M; Medina, F; Contreras, S

    2018-02-01

    Produced water (PW) is the wastewater generated when water from underground reservoirs is brought to the surface during oil or gas extraction. PW is generated in large amounts and has a complex composition, containing various toxic organic and inorganic compounds. PW is currently treated in conventional trains that include phase separators, decanters, cyclones and coarse filters in order to comply with existing regulation for discharge. These treatment trains do not achieve more restrictive limitations related to the reuse of the effluent (reinjection into extraction wells) or other beneficial uses (e.g., irrigation). Therefore, and to prevent environmental pollution, further polishing processes need to be carried out. Characterization of the PW to determine major constituents is the first step to select the optimum treatment for PW, coupled with environmental factors, economic considerations, and local regulatory framework. This review tries to provide an overview of different treatments that are being applied to polish this type of effluents. These technologies include membranes, physical, biological, thermal or chemical treatments, where special emphasis has been made on advanced oxidation processes due to the advantages offered by these processes. Commercial treatments, based on the combination, modification and improvement of simpler treatments, were also discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. State of the art applications of social network analysis

    CERN Document Server

    Can, Fazli; Polat, Faruk

    2014-01-01

    Social network analysis increasingly bridges the discovery of patterns in diverse areas of study as more data becomes available and complex. Yet the construction of huge networks from large data often requires entirely different approaches for analysis including; graph theory, statistics, machine learning and data mining. This work covers frontier studies on social network analysis and mining from different perspectives such as social network sites, financial data, e-mails, forums, academic research funds, XML technology, blog content, community detection and clique finding, prediction of user

  4. State of the art of CO laser angioplasty system

    Science.gov (United States)

    Arai, Tsunenori; Mizuno, Kyoichi; Miyamoto, Akira; Sakurada, Masami; Kikuchi, Makoto; Kurita, Akira; Nakamura, Haruo; Takaoka, Hidetsugu; Utsumi, Atsushi; Takeuchi, Kiyoshi

    1994-07-01

    A unique percutaneous transluminal coronary angioplasty system new IR therapy laser with IR glass fiber delivery under novel angioscope guidance was described. Carbon monoxide (CO) laser emission of 5 mm in wavelength was employed as therapy laser to achieve precise ablation of atheromatous plaque with a flexible As-S IR glass fiber for laser delivery. We developed the first medical CO laser as well as As-S IR glass fiber cable. We also developed 5.5 Fr. thin angioscope catheter with complete directional manipulatability at its tip. The system control unit could manage to prevent failure irradiations and fiber damages. This novel angioplasty system was evaluated by a stenosis model of mongrel dogs. We demonstrated the usefulness of our system to overcome current issues on laser angioplasty using multifiber catheter with over-the-guidewire system.

  5. Imaging of Brown Adipose Tissue: State of the Art.

    Science.gov (United States)

    Sampath, Srihari C; Sampath, Srinath C; Bredella, Miriam A; Cypess, Aaron M; Torriani, Martin

    2016-07-01

    The rates of diabetes, obesity, and metabolic disease have reached epidemic proportions worldwide. In recent years there has been renewed interest in combating these diseases not only by modifying energy intake and lifestyle factors, but also by inducing endogenous energy expenditure. This approach has largely been stimulated by the recent recognition that brown adipose tissue (BAT)-long known to promote heat production and energy expenditure in infants and hibernating mammals-also exists in adult humans. This landmark finding relied on the use of clinical fluorine 18 fluorodeoxyglucose positron emission tomography/computed tomography, and imaging techniques continue to play a crucial and increasingly central role in understanding BAT physiology and function. Herein, the authors review the origins of BAT imaging, discuss current preclinical and clinical strategies for imaging BAT, and discuss imaging methods that will provide crucial insight into metabolic disease and how it may be treated by modulating BAT activity. (©) RSNA, 2016.

  6. Nuclear scanning microprobe: state of the art, applications and progress trends

    International Nuclear Information System (INIS)

    Ponomarev, A.G.

    2011-01-01

    The physical principles of nuclear scanning microprobe are considered. The analysis of state of the art of the microprobe setup from point of view of its spatial resolution and sensitivity of microanalysis techniques is given. The regions of nuclear microprobe applications are reviewed. The ways of spatial resolution and data acquisition system improvement under consideration of microprobe setup progress trends are considered. (authors)

  7. State of the art of High Temperature Power Electronics

    OpenAIRE

    Buttay , Cyril; Planson , Dominique; Allard , Bruno; Bergogne , Dominique; Bevilacqua , Pascal; Joubert , Charles; Lazar , Mihai; Martin , Christian; Morel , Hervé; Tournier , Dominique; Raynaud , Christophe

    2009-01-01

    International audience; High temperature power electronics has become possible with the recent availability of silicon carbide devices. This material, as other wide-bandgap semiconductors, can operate at temperatures above 500°C, whereas silicon is limited to 150-200°C. Applications such as transportation or deep oil and gas wells drilling can benefit. A few converters operating above 200°C have been demonstrated, but work is still ongoing to design and build a power system able to operate in...

  8. State of the art of automatic milking systems

    NARCIS (Netherlands)

    Rossing, W.; Hogewerf, P.H.

    1997-01-01

    Milking cows two or three times a day for 7 days a week is time-consuming and a heavy load for the farmer. Many high-yielding cows enter the milking parlour with heavy udders. To be able to increase the milking frequency and to decrease the physical labour requirements automatic milking systems are

  9. State of the art of biological hydrogen production processes

    International Nuclear Information System (INIS)

    Loubette, N.; Junker, M.

    2006-01-01

    Our report gives an overview of hydrogen production processes with bacteria or algae. 4 main processes are described: water biophotolysis, photo- fermentation biological CO conversion and dark fermentation. Chemical phenomena which lead to hydrogen generation are exp/aired. Performances, limits and outlook are given for each process. Main projects, programs and key players involved in this field of research have been listed. This paper resumes few results of this report. (authors)

  10. State of the art of biological hydrogen production processes

    International Nuclear Information System (INIS)

    Nicolas Loubette; Michel Junker

    2006-01-01

    Our report gives an overview of hydrogen production processes with bacteria or algae. 4 main processes are described: water bio-photolysis, photo-fermentation biological CO conversion and dark fermentation. Chemical phenomena which lead to hydrogen generation are explained. Performances, limits and outlook are given for each process. Main projects, programs and key players involved in this field of research have been listed. This paper resumes few results of this report. (authors)

  11. Basics and state-of-the-art of modal testing

    Indian Academy of Sciences (India)

    important to check that a theoretical model does predict all the phenomena which exist as ... individual processes, both analytical and experimental activities are ... Some physical properties, such as damping and fatigue characteristics, can ...

  12. Photovoltaics in buildings - international market and state of the art

    International Nuclear Information System (INIS)

    Toggweiler, Peter

    1999-01-01

    The author examines the use of PV technology in buildings and stresses the importance of PV integration into the architectural design. The status of European collaboration is briefly reviewed with emphasis on IEA Task VII: PV in the built environment

  13. Primate theory of mind: a state of the art review

    DEFF Research Database (Denmark)

    Byrnit, Jill

    2006-01-01

    -cognitive evner og siden Premack & Woodruff (1978) for første gang introducerede begrebet "theory of mind", er der blevet foretaget mange laboratorie-forsøg om mennesker og andre primaters evne til at attribuere mentale tilstande til andre. I nærværende artikel er størstedelen af disse forsøg med andre primater...

  14. State of the art rapport "verkeersstroommodellen". Deel I: Inleiding.

    NARCIS (Netherlands)

    Botma, H.

    1977-01-01

    In the first part a description is given of the research project "traffic flow models" of the Dutch road safety research institute SWOV in the form of a schematic performance of the traffic process. Thereafter the aim and motivation of the project is discussed in relation to the other basic

  15. State-of-the-art report on the theoretical modeling of interfacial area concentration

    International Nuclear Information System (INIS)

    Lee, Won Jae; Euh, Dong Jin

    1998-03-01

    Classical approaches based on experimental correlations and the mechanistic approaches based on the interfacial area concentration were reviewed. The study focuses on the state-of-the-art researches based on the mechanistic modeling of the interfacial area concentration. The investigation is performed by classifying the mechanistic modeling approaches into those using the number density transport equations supported with a simple algebraic relation for obtaining interfacial area concentration and those using the direct interfacial area transport equations. The modeling approaches are subdivided into one group and multi-group models. The state-of-the-art source terms of transport equations are also investigated for their applicability and limitations. (author). 62 refs., 6 tabs., 49 figs

  16. Energies in Ile de France - state of the art

    International Nuclear Information System (INIS)

    2003-01-01

    Because of the area of Ile de France, depends for 94% of outside for its energy needs, a local energy policy is a priority for the region. This document provides recommendations for the next SDRIF (Directory Scheme for the Ile De France Region) publication. After a recall of some definitions, it presents the main characteristics of the regional energy production and of the consumption. In the next chapters it analyses the final regional energy consumption per energy types and per economic activities sector and presents the organization of the energy supply of the region. Five domains of thought complete this analysis by an evaluation of the next energy policy approach: the tomorrow energy needs, the energy supply security, the place of the renewable energies in Ile de France, the transports problem, the minimization of the natural, industrial and social risks. (A.L.B.)

  17. Spatial Presence Theory: State of the art and challenges ahead

    NARCIS (Netherlands)

    Hartmann, T.; Wirth, W.; Vorderer, P.A.; Klimmt, C.; Schramm, H.; Böcking, S.; Lombard, M.; Biocca, F.; Jonathan Freeman,; Wijnand IJsselsteijn,; Rachel J. Schaevitz,

    2015-01-01

    Highlights key research currently being undertaken within the field of telepresence, providing the most detailed account of the field to date, advancing our understanding of a fundamental property of all media - the illusion of presence; the sense of "being there" inside a virtual environment, with

  18. Open innovation : State of the art and future perspectives

    NARCIS (Netherlands)

    Huizingh, K.R.E.

    Open innovation has become one of the hottest topics in innovation management. This article intends to explore the limits in our understanding of the open innovation concept. In doing so, I address the questions of what (the content of open innovation), when (the context dependency) and how (the

  19. Positron Emission Tomography: state of the art and future developments

    International Nuclear Information System (INIS)

    Pizzichemi, M.

    2016-01-01

    Positron emission tomography (PET) plays a fundamental role in medical imaging, with a wide range of applications covering, among the others, oncology, neurology and cardiology. PET has undergone a steady technological evolution since its introduction in mid 20th century, from the development of 3D PET in the late 1980s, to the invention of PET/CT in the 1990s and more recently with the introduction of PET/MR scanners. The current research topics aiming to develop the next generation of PET scanners are summarized in this paper, focusing on the efforts to increase the sensitivity of the detectors, as long as improving their timing, spatial and energy resolutions, with the final goal of reducing the amount of radioactive dose received by the patients and the duration of the exams while improving at the same time the detectability of lesions.

  20. State of the art on wind resource estimation

    Energy Technology Data Exchange (ETDEWEB)

    Maribo Pedersen, B.

    1998-12-31

    With the increasing number of wind resource estimation studies carried out for regions, countries and even larger areas all over the world, the IEA finds that the time has come to stop and take stock of the various methods used in these studies. The IEA would therefore like to propose an Experts Meeting on wind resource estimation. The Experts Meeting should describe the models and databases used in the various studies. It should shed light on the strengths and shortcomings of the models and answer questions like: where and under what circumstances should a specific model be used? what is the expected accuracy of the estimate of the model? and what is the applicability? When addressing databases the main goal will be to identify the content and scope of these. Further, the quality, availability and reliability of the databases must also be recognised. In the various studies of wind resources the models and databases have been combined in different ways. A final goal of the Experts Meeting is to see whether it is possible to develop systems of methods which would depend on the available input. These systems of methods should be able to address the simple case (level 0) of a region with barely no data, to the complex case of a region with all available measurements: surface observations, radio soundings, satellite observations and so on. The outcome of the meeting should be an inventory of available models as well as databases and a map of already studied regions. (au)

  1. [Physiotherapeutic care marketing research: current state-of-the art].

    Science.gov (United States)

    Babaskin, D V

    2011-01-01

    Successful introduction of modern technologies into the national health care systems strongly depends on the current pharmaceutical market situation. The present article is focused on the peculiarities of marketing research with special reference to physiotherapeutic services and commodities. Analysis of the structure and sequence of marketing research processes is described along with the methods applied for the purpose including their support by the use of Internet resources and technologies.

  2. Prosthetic joint infection: state-of-the-art

    Directory of Open Access Journals (Sweden)

    Boris Sergeyevich Belov

    2013-01-01

    Full Text Available In current clinical practice, joint replacement is one of the progressive and permanently developed surgical treatments in patients with locomotor injury of any genesis. However, the upward trend in the number of replacements is inevitably accompanied by the rising number of patients with periprosthetic joint infection. The polymorphism of its clinical picture and the nonspecificity of diagnostic tests lead to a frequent delay in the diagnosis of prosthetic joint infection (PJI and thus late treatment. This paper gives an update on the etiology, epidemiology, clinical presentation, and diagnosis of PJI. Emphasis is laid on the value of a multimodal approach to PJI treatment Р a combination of surgery and etiotropic antibiotic therapy. The choice of a treatment modality is determined by patient status, comorbidity, and the magnitude and duration of the infectious process.

  3. Clean vehicles with biofuel. A state of the art report

    Energy Technology Data Exchange (ETDEWEB)

    Maansson, Tommy

    1998-09-01

    The purpose of this report is to provide an overall analysis and assessment of the use of biofuel in the Swedish transport sector. The report is based on the information and experiences that have been accumulated within the KFB biofuel programme. The results of the various activities in the programme suggest that the technology required for the use of ethanol and biogas as fuels, functions satisfactorily and that biofuels possess considerable potential as a means of improving health and environment Refs, 57 figs, 20 tabs

  4. BWR stability: history and state-of-the-art

    International Nuclear Information System (INIS)

    Yadigaroglu, George

    2014-01-01

    The paper briefly recalls the historical developments, reviews the important phenomena, the analytical and simulation tools that are used for the analysis of BWR stability focussing on the linear, frequency domain methods

  5. Water soluble vitamins and peritoneal dialysis - State of the art.

    Science.gov (United States)

    Jankowska, Magdalena; Lichodziejewska-Niemierko, Monika; Rutkowski, Bolesław; Dębska-Ślizień, Alicja; Małgorzewicz, Sylwia

    2017-12-01

    This review presents the results of a systematic literature search concerning water soluble vitamins and peritoneal dialysis modality. We provide an overview of the data available on vitamin requirements, dietary intake, dialysis related losses, metabolism and the benefits of supplementation. We also summarise the current recommendations concerning the supplementation of vitamins in peritoneal dialysis and discuss the safety of an administration of vitamins in pharmacological doses. Copyright © 2016 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

  6. State-of-the-art superconducting accelerator magnets

    CERN Document Server

    Rossi, L

    2002-01-01

    With the LHC the technology of NbTi-based accelerator magnets has been pushed to the limit. By operating in superfluid helium, magnetic fields in excess of 10 T have been reached in various one meter-long model magnets while full scale magnets, 15 meter-long dipoles, have demonstrated possibility of safe operation in the 8.3-9 tesla range, with the necessary, very tight, field accuracy. The paper reviews the key points of the technology that has permitted the construction of the largest existing superconducting installations (Fermilab, Desy and Brookhaven), highlighting the novelties of the design of the LHC dipoles, quadrupoles and other superconducting magnets. All together the LHC project will need more than 5000 km of fine filament superconducting cables capable of 14 kA @ 10 T, 1.9 K. (13 refs).

  7. Wearable computers : state of the art and future challenges

    OpenAIRE

    Huang, Chengcheng

    2015-01-01

    In 2007, the advent of iPhone redefined the smart phone; in 2009, the entire market of smart phone systems was shuffled by the Android; in 2015, the number of the mobile phone users worldwide has jumped to 1.91 billion. The mobile Internet and intelligent terminals are now sweeping around the world, standing at the center of everyone’s life, profoundly changing everyone’s ways of communicating, shopping, studying, traveling and so on. As a result, the market of smart phone, tablet and PC h...

  8. Orthodontic Anchorage Implants: State-of-the-art

    DEFF Research Database (Denmark)

    Melsen, Birte

    2007-01-01

    The limits of an orthodontic treatment are often set by the lack of suitable anchorage. The mini-implant is used where conventional anchorage cannot be applied and not as a replacement for conventional anchorage. In patients with lack of teeth and reduced periodontium, skeletal anchorage allows...... will improve the reconstruction possibilities. The mini-implant has widened the orthodontic possibilities....

  9. [Orthognathic surgery in adults: state of the art].

    Science.gov (United States)

    Charrier, Jean-Baptiste

    2014-03-01

    The objective of orthognathic surgery is the repositioning of the osseous bases of the jaws. Its consequences are both aesthetic and functional. As adults are increasingly concerned with appearance, orthognathic surgery is today, more than ever, a close collaboration between the orthodontist, surgeon and general dentist. The whole team must be capable of coordinating its approach with an aesthetic objective. For the surgeon, a perfect knowledge of complementary techniques (rhinoplasty, bone grafts, plastic surgery of the face, lipostructure or fillers) makes orthognathic surgery a completely separate surgical speciality. The aim of this article is to establish the philosophy underlying this type of treatment and define relevant fundamental aspects. We propose an esthetic "extra-oral" clinical approach not focused on occlusal anomalies but on classification of tooth positional abnormalities in the smile and the therapeutic options that we have for placing teeth in correct positions in the smile. © EDP Sciences, SFODF, 2014.

  10. The Swedish underground containment studies state of art

    International Nuclear Information System (INIS)

    Lindbo, T.

    1977-01-01

    Since May of 1973 studies of underground siting for nuclear power plants have been going on in Sweden. War protection being the primary aim in accordance with the instructions the first containment study has lead to siting in rock. The second study was aimed at surveying the advantages and disadvantages of a rock sited 1000 MW BWA nuclear power plant from a reactor safety standpoint, compared to a plant above ground. Based on the instructions and considerations within the study group, the following criteria for the plant design have been established: (1). The plant should be designed to give protection against external acts of war with conventional weapons. (2) The plant should have a safety level equal to that of an above ground plant. (3) The design of the plant should moreover utilize the possibilities of improving the safety afforded by rock siting. The chosen technical design of the reactor plant demands a cavern with a 45-50 metre spar. Studies of the stability of such caverns show that a safety level is attainable corresponding to the safety required for the other parts of the nuclear power plant. The conditions are that the rock is of high quality, that necessary strengthening measures are taken and that careful studies of the rock are made before and during the blasting, and also during operation of the plant. The third study now under way is planned to be delivered to the government in June 1977. One part in this study is going deeper in certain questions (safety, operation, maintenance, sabotage, war protection, cost and decommissioning). Another part aims to a broader view of risks and consequences in peace and war and also advantages and disadvantages of nuclear power plant for district heating

  11. NUCLEAR WASTE state-of-the-art reports 2004

    International Nuclear Information System (INIS)

    2004-01-01

    The report is organized in three parts. First part: 'The nuclear waste question in international and Swedish perspective' takes up questions about how the handling of nuclear waste is organized. This part starts with an international overview of nuclear waste handling in several countries. The overview gives a hint about how countries look for solutions that are judged to be appropriate in the own country. The overview shows clearly that the responsibility for the nuclear waste includes both private and public operators, in varying degrees from country to country. A detailed review is presented of the Swedish process in the chapter 'The municipalities - major stakeholders in the nuclear waste issue'. In the light of the the international overview it is shown that great efforts are spent in order to reach mutual understanding and agreement at the local basis in the Swedish consultation procedure. Part two 'To handle nuclear waste risks: An overview over methods, problems and possibilities' contains an overview of our knowledge in estimating and handling risks and about methods to produce data for assessments associated with the disposal of nuclear waste from a scientific perspective. This part first presents two geoscientific methods that are used to calculate stability and hydraulic conductivity of the bedrock. In the chapter 'Fractioning of different isotopes' the possibility to consider properties of different isotopes for estimation of transport velocities of radioactive substances is discussed, for a repository for spent nuclear fuel or other radioactive wastes. In the chapter 'Copper canisters - production, sealing, durability' an overview is given of the methods used for manufacture and control of those copper canisters that constitute one of the protective barriers around the waste at geologic disposal according to the KBS-3-method. In the last chapter, an experiment to compare classification of radioactive wastes and chemical wastes, is discussed. 'The

  12. State of the Art -- Teacher Effectiveness and Professional Learning

    Science.gov (United States)

    Muijs, Daniel; Kyriakides, Leonidas; van der Werf, Greetje; Creemers, Bert; Timperley, Helen; Earl, Lorna

    2014-01-01

    One of the key findings from decades of educational effectiveness research is the importance of the classroom level as a predictor of pupil outcomes. In this review, we therefore look at synthesising our best evidence from research on effective teaching, and its corollary, teacher development. In the 1st section, we will look at key findings from…

  13. State of the art incubator for controlled atmosphere studies

    DEFF Research Database (Denmark)

    Nielsen, Per Væggemose

    1998-01-01

    in the design of the incubator, due to their importance for the final performance of the incubator. This includes choice of temperature control system, humidification system, gas addition and control, data collection and process control, and the physical design which includes airlocks for taking out samples...

  14. Tissue engineering: state of the art in oral rehabilitation.

    Science.gov (United States)

    Scheller, E L; Krebsbach, P H; Kohn, D H

    2009-05-01

    More than 85% of the global population requires repair or replacement of a craniofacial structure. These defects range from simple tooth decay to radical oncologic craniofacial resection. Regeneration of oral and craniofacial tissues presents a formidable challenge that requires synthesis of basic science, clinical science and engineering technology. Identification of appropriate scaffolds, cell sources and spatial and temporal signals (the tissue engineering triad) is necessary to optimize development of a single tissue, hybrid organ or interface. Furthermore, combining the understanding of the interactions between molecules of the extracellular matrix and attached cells with an understanding of the gene expression needed to induce differentiation and tissue growth will provide the design basis for translating basic science into rationally developed components of this tissue engineering triad. Dental tissue engineers are interested in regeneration of teeth, oral mucosa, salivary glands, bone and periodontium. Many of these oral structures are hybrid tissues. For example, engineering the periodontium requires growth of alveolar bone, cementum and the periodontal ligament. Recapitulation of biological development of hybrid tissues and interfaces presents a challenge that exceeds that of engineering just a single tissue. Advances made in dental interface engineering will allow these tissues to serve as model systems for engineering other tissues or organs of the body. This review will begin by covering basic tissue engineering principles and strategic design of functional biomaterials. We will then explore the impact of biomaterials design on the status of craniofacial tissue engineering and current challenges and opportunities in dental tissue engineering.

  15. State of the art in polarized proton sources

    International Nuclear Information System (INIS)

    Alessi, J.G.

    1987-01-01

    Present day polarized H/sup +/ and H/sup -/ ion sources are reviewed by describing the performance of sources representative of each of the techniques being used. New ideas for producing higher intensities are then mentioned. Presently, pulsed H/sup +/ currents in the milliampere range, and H/sup -/ currents of hundreds of μA's, can be obtained

  16. State-of-art report on the seawater desalination process

    International Nuclear Information System (INIS)

    Hwang, Young Dong; Kim, Young In; Lee, Doo Jung; Chang, Moon Hee

    2000-11-01

    Desalination technologies have been developed over the last 40 years and become a reliable industrial process for water production from sea or blackish water. At present, various desalination processes are available for the effective use of seawater or blackish water as valuable water resources. Since a large amount of energy is required for seawater desalination, the cost of energy is important for desalination. For the regions of severe water shortage, however, desalination is the most economical way of water supply compare to any other alternatives. Currently, water supply by seawater desalination is being increased in the areas of the Caribbean, North African and Middle East. Also, desalination of blackish water is being increased in the south-east region of USA. In general, the distillation process and the membrane technology are used for seawater esalination and the membrane and the electric-dialysis for blackish water. However, the selection of the desalination process is highly dependent on the use of produced water and the local environmental conditions where the desalination plant installed. The local condition is the most important parameters for the selection of the desalination process

  17. State-of-art report on the seawater desalination process

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Young Dong; Kim, Young In; Lee, Doo Jung; Chang, Moon Hee

    2000-11-01

    Desalination technologies have been developed over the last 40 years and become a reliable industrial process for water production from sea or blackish water. At present, various desalination processes are available for the effective use of seawater or blackish water as valuable water resources. Since a large amount of energy is required for seawater desalination, the cost of energy is important for desalination. For the regions of severe water shortage, however, desalination is the most economical way of water supply compare to any other alternatives. Currently, water supply by seawater desalination is being increased in the areas of the Caribbean, North African and Middle East. Also, desalination of blackish water is being increased in the south-east region of USA. In general, the distillation process and the membrane technology are used for seawater esalination and the membrane and the electric-dialysis for blackish water. However, the selection of the desalination process is highly dependent on the use of produced water and the local environmental conditions where the desalination plant installed. The local condition is the most important parameters for the selection of the desalination process.

  18. State-of-the-art in Business Games

    Directory of Open Access Journals (Sweden)

    Panagiotis Petridis

    2015-02-01

    Full Text Available The use of digital games and gamification has demonstrated potential to improve many aspects of how businesses provide training to staff, and communicate with consumers. However, there is still a need for better understanding of how the adoption of games and gasification would influence the process of decision-making in organisations across different industry. This article provides a structured review of existing literature on the use of games in the business environment, and seeks to consolidate findings to address research questions regarding their perception, proven efficacy, and identifies key areas for future work. The findings highlight that serious games can have positive and effective impacts in multiple areas of a business, including training, decision-support, and consumer outreach. They also emphasise the challenges and pitfalls of applying serious games and gamification principles within a business context, and discuss the implications of development and evaluation methodologies on the success of a game-based solution.

  19. Cardiopulmonary resuscitation: state of the art in 2011

    African Journals Online (AJOL)

    2011-02-21

    Feb 21, 2011 ... knowledge and science of resuscitation and offer treatment recommendations. .... anaesthesia falls into one of two categories: medication related and ..... manual pads, or by pressing the button on the defibrillator. Check the ...

  20. State of the art in HTR engineering and design

    International Nuclear Information System (INIS)

    Baust, E.

    1984-11-01

    The high-temperature reactor is an universally applicable energy source on the electricity and heat market, providing energy safely, compatible with the environment, and economically. The startup of the THTR-300, which will commence power generation in spring 1985, and the good results of the preparatory tests and studies for the subsequent plant, the HTR-500, created the required preconditions for the placing of an order to commence work to realize the first planning stage of the HTR-500. The order is expected to be placed within short. BBC/HRB has gained a reputation worldwide as the leading manufacturer of HTR plants. BBC/HRB has the know-how to offer HTR plants of various size over the entire capacity range between 100 and 600 MWe, or as twin-type plants up to 1200 MWe, their design being based on the THTR-300 reference plant. The HTR is an uncomplicated reactor system offering many advantages in terms of operation and safety. This reactor type therefore is the system of choice for energy generation for short-range energy supply. The system also is of interest as an export item, and hence is of significance to the economy and to employment policy. (orig.) [de

  1. Biobased economy : state-of-the-art assessment

    NARCIS (Netherlands)

    Nowicki, P.L.; Banse, M.A.H.; Bolck, C.H.; Bos, H.L.; Scott, E.L.

    2008-01-01

    The interest in the biobased economy stems from the possibility to substitute biologically derived materials and processes for the production of goods that will, therefore, result in a reduced use of petroleum and petro-chemistry. Other reasons are the reduction in the energy required in production

  2. Educational Forecasting Methodologies: State of the Art, Trends, and Highlights.

    Science.gov (United States)

    Hudson, Barclay; Bruno, James

    This overview of both quantitative and qualitative methods of educational forecasting is introduced by a discussion of a general typology of forecasting methods. In each of the following sections, discussion follows the same general format: a number of basic approaches are identified (e.g. extrapolation, correlation, systems modelling), and each…

  3. Effusion method at age 69: current state of the art

    International Nuclear Information System (INIS)

    Cater, E.D.

    1979-01-01

    Historical notes are presented tracing the development of the effusion methods along with some fundamental equations to be used later. Theoretical and experimental limitations of the method, and of each variant of the effusion method are cited. How these problems have been dealt with and where our understanding of them now lies are discussed, and estimates of the accuracy with which derived results can be ascribed are given. Finally, some newer techniques are mentioned which give some of the same results that have traditionally been obtained by effusion studies, try to place them in perspective, and perhaps suggest some future directions for effusion studies

  4. Alternatives to overcoming bacterial resistances: State-of-the-art.

    Science.gov (United States)

    Rios, Alessandra C; Moutinho, Carla G; Pinto, Flávio C; Del Fiol, Fernando S; Jozala, Angela; Chaud, Marco V; Vila, Marta M D C; Teixeira, José A; Balcão, Victor M

    2016-10-01

    Worldwide, bacterial resistance to chemical antibiotics has reached such a high level that endangers public health. Presently, the adoption of alternative strategies that promote the elimination of resistant microbial strains from the environment is of utmost importance. This review discusses and analyses several (potential) alternative strategies to current chemical antibiotics. Bacteriophage (or phage) therapy, although not new, makes use of strictly lytic phage particles as an alternative, or a complement, in the antimicrobial treatment of bacterial infections. It is being rediscovered as a safe method, because these biological entities devoid of any metabolic machinery do not possess any affinity whatsoever to eukaryotic cells. Lysin therapy is also recognized as an innovative antimicrobial therapeutic option, since the topical administration of preparations containing purified recombinant lysins with amounts in the order of nanograms, in infections caused by Gram-positive bacteria, demonstrated a high therapeutic potential by causing immediate lysis of the target bacterial cells. Additionally, this therapy exhibits the potential to act synergistically when combined with certain chemical antibiotics already available on the market. Another potential alternative antimicrobial therapy is based on the use of antimicrobial peptides (AMPs), amphiphilic polypeptides that cause disruption of the bacterial membrane and can be used in the treatment of bacterial, fungal and viral infections, in the prevention of biofilm formation, and as antitumoral agents. Interestingly, bacteriocins are a common strategy of bacterial defense against other bacterial agents, eliminating the potential opponents of the former and increasing the number of available nutrients in the environment for their own growth. They can be applied in the food industry as biopreservatives and as probiotics, and also in fighting multi-resistant bacterial strains. The use of antibacterial antibodies

  5. State-of-the art for production of fertilizers with regard to the IPPC-directive

    International Nuclear Information System (INIS)

    Wiesenberger, H.

    2002-01-01

    In the following section general and process-specific measures for the reduction of waste gas and waste water emissions as well as achievable emission levels for the production of fertilizers are summarized, which should be taken into account when considering state-of-the-art. As far as it is not explicitly noted, measures are applicable and emission levels are achievable for both new and existing plants. (author)

  6. URBAN RUNOFF POLLUTION CONTROL - STATE-OF-THE-ART

    Science.gov (United States)

    Combined sewer overflows are major sources of water pollution problems, but even discharges of stormwater alone can seriously affect water quality. Current approaches involve control of overflows, treatment, and combinations of the two. Control may involve maximizing treatment wi...

  7. Syngas biomethanation: state-of-the-art review and perspectives

    DEFF Research Database (Denmark)

    Grimalt Alemany, Antonio; Skiadas, Ioannis V; Gavala, Hariklia N.

    2018-01-01

    Significant research efforts are currently being made worldwide to develop more efficient biomethane production processes from a variety of waste streams. The biomethanation of biomass-derived syngas can contribute to increasing the potential of methane production as it opens the way for the conv...

  8. State of the art rapport "verkeersstroommodellen". Deel VII. Microscopische verkeersstroomkenmerken.

    NARCIS (Netherlands)

    Botma, H.

    1978-01-01

    Microscopic traffic flow characteristics are based on individual vehicle trajectories. Many characteristics are discussed. They are subdivided according to the amount of detail and are based on the vehicle trajectory itself, the time history of speed and the time history of acceleration

  9. Vocabulary and Health Care Information Technology: State of the Art.

    Science.gov (United States)

    Cimino, James J.

    1995-01-01

    Reviews the controlled medical vocabularies available today and some of the reasons why they have failed to meet the needs of application developers. Topics include standard vocabularies, including International Classification of Diseases and Medical Subject Headings; uses of vocabularies in medical computing; current research; and remaining…

  10. State of the art thoracic ultrasound: intervention and therapeutics

    NARCIS (Netherlands)

    Corcoran, John P.; Tazi-Mezalek, Rachid; Maldonado, Fabien; Yarmus, Lonny B.; Annema, Jouke T.; Koegelenberg, Coenraad F. N.; St Noble, Victoria; Rahman, Najib M.

    2017-01-01

    The use of thoracic ultrasound outside the radiology department and in everyday clinical practice is becoming increasingly common, having been incorporated into standards of care for many specialties. For the majority of practitioners, their experience of, and exposure to, thoracic ultrasound will

  11. Cloud CRM: State-of-the-Art and Security Challenges

    OpenAIRE

    Amin Shaqrah

    2016-01-01

    Security undoubtedly play the main role of cloud CRM deployment, since the agile firms utilized cloud services in the providers infrastructures to perform acute CRM operations. In this paper researcher emphasis on the cloud CRM themes, security threads the most concern. Some aspects of security discussed concern on deployment the cloud CRM like: Access customers’ database and control; secure data transfer over the cloud; trust among the enterprise and cloud service provider; confidentiality, ...

  12. State of the Art and Trends in Wind Resource Assessment

    Directory of Open Access Journals (Sweden)

    Oliver Probst

    2010-06-01

    Full Text Available Given the significant rise of the utilization of wind energy the accurate assessment of the wind potential is becoming increasingly important. Direct applications of wind assessment techniques include the creation of wind maps on a local scale (typically 5 20 km and the micrositing of wind turbines, the estimation of vertical wind speed variations, prospecting on a regional scale (>100 km, estimation of the long-term wind resource at a given site, and forecasting. The measurement of wind speed and direction still widely relies on cup anemometers, though sonic anemometers are becoming increasingly popular. Moreover, remote sensing by Doppler techniques using the backscattering of either sonic beams (SODAR or light (LIDAR allowing for vertical profiling well beyond hub height are quickly moving into the mainstream. Local wind maps are based on the predicted modification of the regional wind flow pattern by the local atmospheric boundary layer which in turn depends on both topographic and roughness features and the measured wind rose obtained from one or several measurement towers within the boundaries of the planned development site. Initial models were based on linearized versions of the Navier-Stokes equations, whereas more recently full CFD models have been applied to wind farm micrositing. Linear models tend to perform well for terrain slopes lower than about 25% and have the advantage of short execution times. Long-term performance is frequently estimated from correlations with nearby reference stations with concurrent information and continuous time series over a period of at least 10 years. Simple methods consider only point-to-point linear correlations; more advanced methods like multiple regression techniques and methods based on the theory of distributions will be discussed. Both for early prospecting in regions where only scarce or unreliable reference information is available, wind flow modeling on a larger scale (mesoscale is becoming

  13. Reliability databases: State-of-the-art and perspectives

    DEFF Research Database (Denmark)

    Akhmedjanov, Farit

    2001-01-01

    The report gives a history of development and an overview of the existing reliability databases. This overview also describes some other (than computer databases) sources of reliability and failures information, e.g. reliability handbooks, but the mainattention is paid to standard models...... and software packages containing the data mentioned. The standards corresponding to collection and exchange of reliability data are observed too. Finally, perspective directions in such data sources development areshown....

  14. [Acute achilles tendon rupture : State of the art].

    Science.gov (United States)

    Braunstein, M; Baumbach, S F; Herterich, V; Böcker, W; Polzer, H

    2017-12-01

    The most favorable treatment for acute Achilles tendon ruptures remains controversial. In particular, three key questions are intensively debated: is operative or non-operative treatment superior? If surgery is performed, should open or minimally invasive percutaneous techniques be used? How should the follow-up treatment be carried out? The aim of this article is to answer these essential questions based on the currently available evidence. Non-operative treatment leads to a higher rate of re-ruptures and inferior functional results when compared to operative treatment. The major disadvantage of open surgery is the increased risk of wound healing problems and wound infections. Due to the development of minimally invasive percutaneous techniques, complication rates could be significantly reduced and patient satisfaction could be significantly improved, without increasing the risk of re-ruptures. The functional outcome is still partially unsatisfactory independent of the type of treatment. This is particularly expressed in weakness of the gastrocnemius-soleus muscle complex; therefore, the follow-up treatment is of fundamental importance. The available evidence clearly underlines the importance of early weight bearing and mobilization of the ankle joint, as it is safe and leads to better function, patient satisfaction and faster return to work or sport, compared with partial weight bearing and immobilization. Nevertheless, treatment protocols vary greatly with the majority still carrying out open suture and immobilizing follow-up treatment with fixed plantar flexion. Based on the available data the authors recommend minimally invasive percutaneous suture of the tendon followed by progressive functional rehabilitation. Implementation of the available evidence into routine practice is the next important step for successful treatment of this challenging injury.

  15. Wall thickness measurements using digital radiography - state of the art

    International Nuclear Information System (INIS)

    Wawrzinek, T.; Zscherpel, U.; Bellon, C.

    1997-01-01

    Projection radiography is a method long since used for wall thickness measurements in pipes. Another method sometimes applied is thickness determination based on measuring changes of the optical density by using radioactive isotopes, as in this case the effects of stray radiation are negligible. The two methods hitherto were to be performed manually, and wall thickness data were derived by calculations with a pocket calculator. The required measuring and calculating work can now be automated by way of computerized processing of digitised images. The paper presents the software for automated evaluation of data of a selected location after system calibration. (orig./CB) [de

  16. [Masculinity and femininity scales: current state of the art].

    Science.gov (United States)

    Fernández, Juan; Quiroga, María A; Del Olmo, Isabel; Rodríguez, Antonio

    2007-08-01

    A theoretical and empirical review of masculinity and femininity scales was carried out after 30 years of their existence. Hypotheses to be tested were: (a) muldimensionality versus bidimensionality; (b) inadequate percentage of variance accounted for (less than 50%); (c) inconsistency between factor structure and the dualistic model. 618, 200 and 287 students took part in each of the three studies that were carried out. Factorial analyses (PAF) were performed. Results support multidimensionality, unsatisfactory percentage of variance accounted for, and lack of congruence between obtained factors and the dualistic model. All these data were analysed within the context of the twofold sex and gender reality model.

  17. Interventional MR imaging: state of the art and future perspectives

    International Nuclear Information System (INIS)

    Kahn, T.; Moedder, U.

    1998-01-01

    The concept of MR guidance of invasive diagnostic and minimally invasive therapeutic procedures is based on the excellent morphologic and functional properties of MR imaging. Prerequisites are adequate patient monitoring and adherence to safety guidelines. Fast and ultrafast sequences, temperature quantification, visualization of intravascular devices, thermal stability of contrast media and thermosensitive contrast media are discussed. The spectrum of clinical applications includes biopsies, thermal ablation modalities, vascular applications, MR endoscopy and intraoperative MR imaging. The development of interventional MR imaging is still in its infancy. In the future, MR imaging may play an important role in interventional radiology and minimally invasive therapy. (orig.) [de

  18. Stinging insect allergy: state of the art 2015.

    Science.gov (United States)

    Tankersley, Michael S; Ledford, Dennis K

    2015-01-01

    Stinging insect allergy is responsible for more than 10% of all cases of anaphylaxis. The potential culprit insects are diverse and vary with geography. The incidence of insect allergy is declining in some areas and increasing in others, possibly due to effects of climate change, introduction of species into new areas, outdoor recreational activities, and movement of human populations that brings insects into contact with a greater number of people. Flying Hymenoptera and imported fire ant stings are responsible for the majority of patients evaluated for insect anaphylaxis. The most efficient means of identifying allergy to insects is skin testing although falsely positive and negative results occur. The limitations of testing coupled with the natural temporal variability of allergic sensitivity complicate the interpretation of test results. The clinical history is of paramount importance to be certain that the test results are relevant; therefore, screening or testing before a history of a sting reaction is not advisable. Mast cell disorders are associated with severe anaphylaxis from insect stings and should be considered in affected subjects. Insect immunotherapy, using venoms for most insects and whole-body extracts for imported fire ants, is proven effective in reducing the likelihood of anaphylaxis due to subsequent stings from 40%-60% to less than 5%. Future clinical application of component testing or in vitro cellular tests, such as the basophil activation test, may improve optimal choices for immunotherapy. Published by Elsevier Inc.

  19. Ultrasound imaging in urogynecology – state of the art 2016

    Directory of Open Access Journals (Sweden)

    Michał Bogusiewicz

    2016-11-01

    Full Text Available The role of ultrasound imaging in urogynecology is not clearly defined. Despite significant developments in visualization techniques and interpretation of images, pelvic ultrasound is still more a tool for research than for clinical practice. Structures of the lower genitourinary tract and pelvic floor can be visualized from different approaches: transperineal, introital, transvaginal, abdominal or endoanal. According to contemporary guidelines and recommendations, the role of ultrasound in urogynecology is limited to the measurement of post-void residue. However, in many instances, including planning and audit of surgical procedures, management of recurrences or complications, ultrasound may be proposed as the initial examination of choice. Ultrasound may be used for assessment of bladder neck mobility before anti-incontinence procedures. On rare occasions it is helpful in recognition of pathologies mimicking vaginal prolapse such as vaginal cyst, urethral diverticula or rectal intussusception. In patients subjected to suburethral slings, causes of surgery failure or postsurgical voiding dysfunctions can be revealed by imaging. Many reports link the location of a tape close to the bladder neck to unfavorable outcomes of sling surgery. Some postoperative complications, such as urinary retention, mesh malposition, hematoma, or urinary tract injury, can be diagnosed by ultrasound. On the other hand, the clinical value of some applications of ultrasound in urogynecology, for example measurement of the bladder wall thickness as a marker of detrusor overactivity, has not been proved.

  20. Rewetting and liquid entrainment during reflooding: state of the art

    International Nuclear Information System (INIS)

    Elias, E.; Yadigaroglu, G.

    1977-05-01

    Considerable interest has recently been generated in the problems of surface rewetting and the physics of liquid droplet entrainment due to their role in light water nuclear reactor safety. Published models of the rewetting process include simple one-dimensional solutions in two axial regions, one-dimensional solutions in three axial regions with or without precursory cooling, one- and two-dimensional numerical-difference techniques using temperature dependent heat transfer coefficients, and analytical two-dimensional solutions. The basic assumptions of these models and the numerical values assigned to the various parameters, as well as empirical rewetting correlations, are discussed. The various mechanisms for liquid droplet entrainment and analytical formulations of the critical gas velocity and of the droplet diameter at the onset of entrainment are reviewed

  1. Radioactive waste governance, state of the art and future needs

    International Nuclear Information System (INIS)

    Schroeder, Jantine; Meskens, Gaston

    2010-01-01

    During the past decade, a positive evolution towards more openness, transparency and communication can be observed within Radioactive Waste Management (RWM). An expertocratic, top down approach is slowly and gradually changing towards a governance approach. We will argue that, despite this positive and pragmatically speaking inevitable evolution in RWM, stakeholders on both sides of the spectrum as to speak, cannot deny the persistent fragility of trust and proneness to misunderstanding. Long standing opposing paradigms stand strong. Scientist on the one hand and the public on the other, confront each other respectively with speaking of what one believes but cannot prove, and of what one feels but cannot explain. Both sides often end up baffled with each others vocabulary and motivations. Throughout this paper, we will investigate the underlying reasons for this chasm, focussing on the theoretical interconnected statuses of science, knowledge, the expert and the lay-person. The (Belgian) case of RWM will be used as an illustration for each section. (authors)

  2. Neuroevolution in Games: State of the Art and Open Challenges

    DEFF Research Database (Denmark)

    Risi, Sebastian; Togelius, Julian

    2015-01-01

    This paper surveys research on applying neuroevolution (NE) to games. In neuroevolution, artificial neural networks are trained through evolutionary algorithms, taking inspiration from the way biological brains evolved. We analyse the application of NE in games along five different axes, which...... are the role NE is chosen to play in a game, the different types of neural networks used, the way these networks are evolved, how the fitness is determined and what type of input the network receives. The article also highlights important open research challenges in the field....

  3. Allergen source materials: state-of-the-art.

    Science.gov (United States)

    Esch, Robert E

    2009-01-01

    A variety of positive outcomes can be realized from validation and risk management activities (see Table 4). They are dependent on the participation of multiple functional groups including the quality unit, regulatory and legal affairs, engineering and production operations, research and development, and sales and marketing. Quality risk management is receiving increased attention in the area of public health, pharmacovigilance, and pharmaceutical manufacturing. Recent examples of its regulatory use in our industry include the assessment of the potential risks of transmissible spongiform encephalopathies (TSE) agents through contaminated products], the risks of precipitates in allergenic extracts, and the revision of the potency limits for standardized dust mite and grass allergen vaccines. Its application to allergen source material process validation activities allowed for a practical strategy, especially in a complex manufacturing environment involving hundreds of products with multiple intended uses. In addition, the use of tools such as FMEA was useful in evaluating proposed changes made to manufacturing procedures and product specifications, new regulatory actions, and customer feedback or complaints. The success of such a quality assurance programs will ultimately be reflected in the elimination or reduction of product failures, improvement in the detection and prediction of potential product failures, and increased confidence in product quality.

  4. Echocardiography in Infective Endocarditis: State of the Art.

    Science.gov (United States)

    Afonso, Luis; Kottam, Anupama; Reddy, Vivek; Penumetcha, Anirudh

    2017-10-25

    In this review, we examine the central role of echocardiography in the diagnosis, prognosis, and management of infective endocarditis (IE). 2D transthoracic echocardiography (TTE) and transesophageal echocardiography TEE have complementary roles and are unequivocally the mainstay of diagnostic imaging in IE. The advent of 3D and multiplanar imaging have greatly enhanced the ability of the imager to evaluate cardiac structure and function. Technologic advances in 3D imaging allow for the reconstruction of realistic anatomic images that in turn have positively impacted IE-related surgical planning and intervention. CT and metabolic imaging appear to be emerging as promising ancillary diagnostic tools that could be deployed in select scenarios to circumvent some of the limitations of echocardiography. Our review summarizes the indispensable and central role of various echocardiographic modalities in the management of infective endocarditis. The complementary role of 2D TTE and TEE are discussed and areas where 3D TEE offers incremental value highlighted. An algorithm summarizing a contemporary approach to the workup of endocarditis is provided and major societal guidelines for timing of surgery are reviewed.

  5. Powder Metallurgy characteristics and application: state of the art

    International Nuclear Information System (INIS)

    Zaid, A.I.O.

    2005-01-01

    Powder metallurgy process (P/M) is a near-net or net-shape manufacturing process that combines the features of shape making technology of powder compaction with the development of final material and design properties (physical and mechanical) during subsequent densification or consolidation processes, e.g. sintering. It utilizes the metal powder or powders of metal alloys. In this paper, the major historical developments in P/M are reviewed and discussed. The main parameters involved in the process and their effects on the product characteristics are presented and discussed, which include: powders and methods of their production, particle size and shape, compressibility and additives, sintering temperature and time and finishing processes. The advantages and limitations of powder metallurgy are also presented and discussed. Finally, applications and future developments of the process are outlined and discussed. (author)

  6. Big Data Provenance: Challenges, State of the Art and Opportunities.

    Science.gov (United States)

    Wang, Jianwu; Crawl, Daniel; Purawat, Shweta; Nguyen, Mai; Altintas, Ilkay

    2015-01-01

    Ability to track provenance is a key feature of scientific workflows to support data lineage and reproducibility. The challenges that are introduced by the volume, variety and velocity of Big Data, also pose related challenges for provenance and quality of Big Data, defined as veracity. The increasing size and variety of distributed Big Data provenance information bring new technical challenges and opportunities throughout the provenance lifecycle including recording, querying, sharing and utilization. This paper discusses the challenges and opportunities of Big Data provenance related to the veracity of the datasets themselves and the provenance of the analytical processes that analyze these datasets. It also explains our current efforts towards tracking and utilizing Big Data provenance using workflows as a programming model to analyze Big Data.

  7. [Biomedicine in thoracic surgery: state of the art].

    Science.gov (United States)

    Leistner, M; Steinke, M; Walles, T

    2013-06-01

    Biomedicine represents a new scientific field at the interface of human, molecular and cell biology and medicine. Comprising the diverse disciplines of stem cell research, tissue engineering and material sciences, biomedicine gives rise to new approaches in research and therapy for - to date - unmet medical issues. Biomedical research is currently conducted in many medical, especially surgical subspecialties, and a number of successful developments have already been brought to clinical application. Concerning thoracic surgery, biomedical approaches are pursued primarily for tissue and organ replacement of the upper airways, lung and thoracic wall. In spite of a comparatively small research foundation, five different concepts have been clinically implemented worldwide, due to a lack of established treatment options in the case of extensive disease of the greater airways. In this review, the clinical background and the tissue-specific basics of tracheobronchial biomedicine are presented. Georg Thieme Verlag KG Stuttgart · New York.

  8. State of the art report on iodine chemistry

    International Nuclear Information System (INIS)

    Clement, B.; Cantrel, L.; Ducros, G.; Funke, F.; Herranz, L.; Rydl, A.; Weber, G.; Wren, C.

    2007-01-01

    An accident in which the normal core cooling is lost could lead to fuel elements melting and fission product release beyond the plant limits. Nuclear power plants are designed with engineering systems and associated operational procedures which provide an in-depth defence against such accidents. Iodine is a major contributor to the potential source term to the environment, thus a good understanding of its behaviour and validated calculation tools are required to perform meaningful risk analyses and make decisions in the field of accident management, mitigation measures and emergency procedures. A number of experimental programmes, involving separate-effect and integral tests have been carried out during the last decade, providing new and valuable results that have improved our understanding of iodine phenomena. A modelling effort has also been pursued in order to encapsulate the acquired knowledge in the calculation tools prepared for predicting the iodine behaviour under severe accident conditions. In view of the progress made, the Working Group on Analysis and Management of Accidents (GAMA) considered the necessity of producing a status paper on iodine chemistry, with the following objectives: - to review insights gained and evaluate the progress made during the last 10 years on the understanding of phenomena governing iodine chemistry and release in the case of a reactor severe accident, - to evaluate the current status of iodine chemistry knowledge and tools used for source term prediction in connection with accident management and emergency planning, under various reactor conditions, to identify the remaining weaknesses, discuss the reactor safety relevance of these issues and make recommendations as necessary. This paper aims at shedding light on the present situation, helping end-users and decision makers to adequately address questions related to iodine behaviour under severe accident conditions, and to essential programmes of work in this area

  9. State of the art in acoustic energy harvesting

    Science.gov (United States)

    Ullah Khan, Farid; Izhar

    2015-02-01

    For portable and embedded smart, wireless electronic systems, energy harvesting from the ambient energy sources has gained immense interest in recent years. Several ambient energies exist in the environment of wireless sensor nodes (WSNs) that include thermal, solar, vibration and acoustic energy. This paper presents the recent development in the field of acoustic energy harvesters (AEHs). AEHs convert the acoustic energy into useful electrical energy for the operation of autonomous wireless sensors. Mainly, two types of AEHs (electromagnetic and piezoelectric based) have been developed and reported in literature. The power produced by the reported piezoelectric AEHs ranges from 0.68 pW to 30 mW however, the power generation of the developed electromagnetic AEHs is in the range of 1.5-1.96 mW. The overall size of most of the developed piezoelectric and electromagnetic AEHs are quite comparable and in millimeter scale. The resonant frequencies of electromagnetic AEHs are on the lower side (143-470 Hz), than that of piezoelectric AEHs (146 Hz-16.7 kHz).

  10. State of the art in acoustic energy harvesting

    International Nuclear Information System (INIS)

    Khan, Farid Ullah; Izhar

    2015-01-01

    For portable and embedded smart, wireless electronic systems, energy harvesting from the ambient energy sources has gained immense interest in recent years. Several ambient energies exist in the environment of wireless sensor nodes (WSNs) that include thermal, solar, vibration and acoustic energy. This paper presents the recent development in the field of acoustic energy harvesters (AEHs). AEHs convert the acoustic energy into useful electrical energy for the operation of autonomous wireless sensors. Mainly, two types of AEHs (electromagnetic and piezoelectric based) have been developed and reported in literature. The power produced by the reported piezoelectric AEHs ranges from 0.68 pW to 30 mW; however, the power generation of the developed electromagnetic AEHs is in the range of 1.5–1.96 mW. The overall size of most of the developed piezoelectric and electromagnetic AEHs are quite comparable and in millimeter scale. The resonant frequencies of electromagnetic AEHs are on the lower side (143–470 Hz), than that of piezoelectric AEHs (146 Hz–16.7 kHz). (topical review)

  11. The Swedish underground containment studies - state of art

    International Nuclear Information System (INIS)

    Lindbo, T.

    1977-01-01

    Since May 1973 studies of underground siting for nuclear power plants have been going on in Sweden. War protection being the primary aim in accordance with the instructions the first containment study has lead to siting in rock or in a pit. Rock siting gives better war protection than pit siting and also has less effect on the landscape, the cost being about equal. The second study was aimed at surveying the advantages and disadvantages of a rock sited 1000 MW BWR nuclear power plant from a reactor safety standpoint, compared to a plant above ground. Based on the instructions and considerations within the study group, the following criteria for the plant design have been established: (1) The plant should be designed to give protection against external acts of war with conventional weapons. (2) The plant should have a safety level equal to that of an above ground plant. It should fulfil the demands set by the authorities for above ground plants with respect to normal operation and accidents. No accidents that can be dealt with above ground may be permitted to result in more serious consequences, nor may they have a higher probability in a plant sited in rock. (3) The design of the plant should moreover utilize the possbilities of improving the safety afforded by rock siting. The criterion about war protection leads to siting in rock or pit, as shown in a previous CDL study. The study group has concentrated its work on rock siting. (Auth.)

  12. Cooling tower practice in Germany: state of the art

    International Nuclear Information System (INIS)

    Zerna, W.; Kraetzig, W.B.; Mungan, I.

    1982-01-01

    Development in design and construction of natural draught cooling towers that has taken place in Germany is discussed. Research has been concentrated on theory and analysis of shells, on acting forces, especially on wind effects, on buckling behavior and constructional problems. An approximate earthquake analysis allows a quick estimation of seismic response. The earthquake analysis is carried out by the response-spectrum-method. All design methods develop construction methods minimizing the imperfections and their control and correction during the erection process. It is shown how by arranging stiffening rings the buckling resistance and the lowest natural frequency of this new generation of cooling towers can be improved. 13 refs

  13. Big Data Provenance: Challenges, State of the Art and Opportunities

    OpenAIRE

    Wang, Jianwu; Crawl, Daniel; Purawat, Shweta; Nguyen, Mai; Altintas, Ilkay

    2015-01-01

    Ability to track provenance is a key feature of scientific workflows to support data lineage and reproducibility. The challenges that are introduced by the volume, variety and velocity of Big Data, also pose related challenges for provenance and quality of Big Data, defined as veracity. The increasing size and variety of distributed Big Data provenance information bring new technical challenges and opportunities throughout the provenance lifecycle including recording, querying, sharing and ut...

  14. State of the art on reactor noise analysis

    International Nuclear Information System (INIS)

    Bernard, P.; Fry, D.; Stegemann, D.; Van Dam, H.

    1986-01-01

    This report is the result of the work of a task force sponsored by the NEA Committee on Reactor Physics (NEACRP) and is divided into six chapters: 1. Loose-Parts Detection and Acoustic Monitoring, 2. Thermal Hydraulics Surveillance, 3. Flow Measurements, 4. Vibration Monitoring, 5. Surveillance Systems and Evaluation Methods, and 6. System Dynamic Analysis. Each chapter summarizes the current situation in noise analysis techniques with emphasis on the following aspects: . physical quantities considered, . possible anomalies involved, . sensors used for the detection, and . conditions of applications. The remainder of each chapter discusses future trends and recommendations

  15. State-of-the-Art Assessment -- Shelter Habitability.

    Science.gov (United States)

    1982-09-01

    sewage disposal systems, chlorination of public water supplies, pasteurization of milk , general sanitary precautions in the food processing industry, etc...be ruled out. A recent article in the New England Journal of Medicine examined the threat of communicable diseases to survivors of a nuclear war and...Low temperature, which causes increased mucus secretion and favors transmission [109]. Mitchell [83] and Johnston et al. [89] concluded that

  16. Myofibrillar myopathies: State of the art, present and future challenges.

    Science.gov (United States)

    Béhin, A; Salort-Campana, E; Wahbi, K; Richard, P; Carlier, R-Y; Carlier, P; Laforêt, P; Stojkovic, T; Maisonobe, T; Verschueren, A; Franques, J; Attarian, S; Maues de Paula, A; Figarella-Branger, D; Bécane, H-M; Nelson, I; Duboc, D; Bonne, G; Vicart, P; Udd, B; Romero, N; Pouget, J; Eymard, B

    2015-10-01

    Myofibrillar myopathies (MFM) have been described in the mid-1990s as a group of diseases sharing common histological features, including an abnormal accumulation of intrasarcoplasmic proteins, the presence of vacuoles and a disorganization of the intermyofibrillar network beginning at the Z-disk. The boundaries of this concept are still uncertain, and whereas six genes (DES, CRYAB, LDB3/ZASP, MYOT, FLNC and BAG3) are now classically considered as responsible for MFM, other entities such as FHL1 myopathy or Hereditary Myopathy with Early Respiratory Failure linked to mutations of titin can now as well be included in this group. The diagnosis of MFM is not always easy; as histological lesions can be focal, and muscle biopsy may be disappointing; this has led to a growing importance of muscle imaging, and the selectivity of muscle involvement has now been described in several disorders. Due to the rarity of these myopathies, if some clinical patterns (such as distal myopathy associated with cardiomyopathy due to desmin mutations) are now well known, surprises remain possible and should lead to systematic testing of the known genes in case of a typical histological presentation. In this paper, we aim at reviewing the data acquired on the six main genes listed above as well as presenting the experience from two French reference centres, Paris and Marseilles. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  17. State of the art in wind turbine aerodynamics and aeroelasticity

    DEFF Research Database (Denmark)

    Hansen, Martin Otto Laver; Sørensen, Jens Nørkær; Voutsinas, S

    2006-01-01

    A comprehensive review of wind turbine aeroelasticity is given. The aerodynamic part starts with the simple aerodynamic Blade Element Momentum Method and ends with giving a review of the work done applying CFD on wind turbine rotors. In between is explained some methods of intermediate complexity...

  18. State of the Art Review: Atrial Fibrillation in Athletes.

    Science.gov (United States)

    Flannery, M Darragh; Kalman, Jonathan M; Sanders, Prashanthan; La Gerche, André

    2017-09-01

    Exercise has substantial health benefits with pleomorphic vascular, metabolic, psychological and anti-neoplastic actions resulting in improved quality of life and longevity. Despite these many benefits, numerous studies have shown that endurance athletes are more likely to develop atrial fibrillation (AF) than non-athletes. The type, intensity and amount of sport appears to influence the risk of developing AF. Several endurance sport activities have been shown to increase the risk of developing AF but an excess in AF has not been shown in non-endurance sports. Furthermore, lifetime hours of participation appear to increase the risk of developing AF. Intriguingly, women appear relatively protected and an association between endurance sport and AF has not been clearly demonstrated amongst female endurance athletes. The mechanisms by which endurance sport promotes the development of AF are unclear. There are, however, a number of pathophysiological mechanisms which are known to increase the risk of AF in non-athletes which have correlates in athletes. These include structural remodelling of the left atrium, elevated left atrial pressure, inflammation, myocardial fibrosis, vagal tone, sinus bradycardia and genetic predisposition. In this article, we explore how some of these mechanisms may contribute to the development of AF in endurance athletes. Copyright © 2017 Australian and New Zealand Society of Cardiac and Thoracic Surgeons (ANZSCTS) and the Cardiac Society of Australia and New Zealand (CSANZ). Published by Elsevier B.V. All rights reserved.

  19. Solid Waste Processing. A State-of-the-Art Report on Unit Operations and Processes.

    Science.gov (United States)

    Engdahl, Richard B.

    The importance and intricacy of the solid wastes disposal problem and the need to deal with it effectively and economically led to the state-of-the-art survey covered by this report. The material presented here was compiled to be used by those in government and private industry who must make or implement decisions concerning the processing of…

  20. State-of-the-art synthetic membrane for capping landfills

    International Nuclear Information System (INIS)

    Kriofske, K.P.; Gagle, D.W.

    1991-01-01

    Very Low Density Polyethylene (VLDPE) has emerged as a superior capping material for landfill closures. Landfills must be capped by a material which will undergo substantial deformation in areas of localized settlement prior to rupture. Methane and hydrogen sulfide gases must be contained and directed to collection points without permeating the landfill cap. Vegetative growth in the cover sods will be protected by the gas impermeability of the geosynthetic membrane. VLDPE compounded with carbon black is minimally affected by radiation and is inert to ultraviolet rays. This property sustains VLDPE's ability to retard gas permeation at levels superior to other geosynthetics. Cover soil stability on long cap slopes in all weather conditions is crucial. It has been demonstrated in the laboratory and in full-scale, on-site test conditions that VLDPE exhibits friction characteristics equaling or exceeding other synthetics used for this purpose without diminishing physical and chemical properties. Large-scale, multiaxial stress tests have demonstrated the ability of VLDPE to deflect substantially in all directions of a potential settlement area. Only PVC can equal the elastic deformation properties of VLDPE, but PVC is more gas-permeable susceptible to degradation due to natural soil radiation or ultraviolet light and heat. Test results are presented to illustrate these points. The geosynthetic cap membrane must prevent water percolation into the landfill to prevent the formation of hazardous leachates. The use of a VLDPE cap reduces the depth of cap soils, thus increasing landfill volume. The economics and reduction in long-term liabilities of closure costs are enhanced by the use of VLDPE in the cap system. Since the expected half-life of polyethylene exceeds hundreds of years, the inclusion of VLDPE in the cap system will provide pollution security for many generations

  1. Mandible reconstruction: History, state of the art and persistent problems.

    Science.gov (United States)

    Ferreira, José J; Zagalo, Carlos M; Oliveira, Marta L; Correia, André M; Reis, Ana R

    2015-06-01

    Mandibular reconstruction has been experiencing an amazing evolution. Several different approaches are used to reconstruct this bone and therefore have a fundamental role in the recovery of oral functions. This review aims to highlight the persistent problems associated with the approaches identified, whether bone grafts or prosthetic devices are used. A brief summary of the historical evolution of the surgical procedures is presented, as well as an insight into possible future pathways. A literature review was conducted from September to December 2012 using the PubMed database. The keyword used was "mandible reconstruction." Articles published in the last three years were included as well as the relevant references from those articles and the "historical articles" were referred. This research resulted in a monograph that this article aims to summarize. Titanium plates, bone grafts, pediculate flaps, free osteomyocutaneous flaps, rapid prototyping, and tissue engineering strategies are some of the identified possibilities. The classical approaches present considerable associated morbidity donor-site-related problems. Research that results in the development of new prosthetics devices is needed. A new prosthetic approach could minimize the identified problems and offer the patients more predictable, affordable, and comfortable solutions. This review, while affirming the evolution and the good results found with the actual approaches, emphasizes the negative aspects that still subsist. Thus, it shows that mandible reconstruction is not a closed issue. On the contrary, it remains as a research field where new findings could have a direct positive impact on patients' life quality. The identification of the persistent problems reveals the characteristics to be considered in a new prosthetic device. This could overcome the current difficulties and result in more comfortable solutions. Medical teams have the responsibility to keep patients informed about the predictable

  2. State of the art on ion and precipitate flotation

    Energy Technology Data Exchange (ETDEWEB)

    Jung, In Ha; Yang, Myung Seung; Bae, Ki Kwang; Shon, Jong Sik; Cho, Young Hyun

    1997-08-01

    This report is contained research status of foam separation technique and thus theoretical backgrounds, the kinds of surfactants using for the foam separation technique, their characteristics, general structure and role, surfactant absorption mechanism at liquid/vapor/solid interfaces, effectiveness and efficiency were interpreted with well known models. Ion flotation and precipitate flotation which are applicable for the treatment of very low radioactive liquid wastes were analyzed on the effect of pH, foreign ions, initial concentration of metal ion through the recent presented papers. As the result of technical analysis of foam separation technique, foam separation technique seems to be applicable for the treatment of very low radioactive liquid wastes such as laundry and shower waste. (author). 42 refs., 2 tabs., 37 figs

  3. Laser cutting, State of the art and technological trends

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    1999-01-01

    In this paper a short review of the development trends in laser cutting will be given. The technoloty which is the fastest expanding industrial production technology will develop in both its core market segment: Flat bed cutting of sheet metal as it will expand in heavy industry and in cutting of 3......-dimensional shapes. The CO2 laser will also in the near futre be the domination laser source in the market, although the new developments in ND-YAG-lasers opens for new possibilities for this laser type....

  4. Nitrogen deposition and traffic. State-of-the-art

    International Nuclear Information System (INIS)

    Teeuwisse, S.

    2010-01-01

    Nitrogen deposition is caused, among other things, by road traffic. This article addresses the relation between traffic and nitrogen deposition and the manner in which the contribution of traffic to nitrogen deposition can be quantified. [nl

  5. Silver nanoparticle ink technology: state of the art

    Directory of Open Access Journals (Sweden)

    Rajan K

    2016-01-01

    Full Text Available Krishna Rajan, Ignazio Roppolo, Annalisa Chiappone, Sergio Bocchini, Denis Perrone, Alessandro Chiolerio Center for Space Human Robotics, Italian Institute of Technology, Turin, Italy Abstract: Printed electronics will bring to the consumer level great breakthroughs and unique products in the near future, shifting the usual paradigm of electronic devices and circuit boards from hard boxes and rigid sheets into flexible thin layers and bringing disposable electronics, smart tags, and so on. The most promising tool to achieve the target depends upon the availability of nanotechnology-based functional inks. A certain delay in the innovation-transfer process to the market is now being observed. Nevertheless, the most widely diffused product, settled technology, and the highest sales volumes are related to the silver nanoparticle-based ink market, representing the best example of commercial nanotechnology today. This is a compact review on synthesis routes, main properties, and practical applications. Keywords: silver nanoparticles, surface plasmon resonance, nanocomposites, inks, printed electronics

  6. Daya Bay PWRs will be state-of-the-art

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    Preparations for commissioning and startup of the Daya Bay nuclear plant in Guangdong, China, have been underway for some time. The project which incorporates two imported French 900 MWe Pressurized Water Reactors, represents a major technology transfer effort between the Chinese and European contractors, resulting in the highest standards of quality. (author)

  7. Trends in interactive visualization state-of-the-art survey

    CERN Document Server

    Wu, Xindong

    2008-01-01

    The purpose of Interactive Visualization is to develop scientific methods to increase scientists'' abilities to explore data and to understand better the results of experiments based on extensive calculations. This book provides readers with insight in Interactive Visualization from various perspectives, representing the developments in the field.

  8. Secondary and Tertiary Hyperparathyroidism, State of the Art Surgical Management

    Science.gov (United States)

    Pitt, Susan C.; Sippel, Rebecca S.

    2010-01-01

    Synopsis This article reviews the current surgical management of patients with secondary and tertiary hyperparathyroidism. The focus is on innovative surgical strategies that have improved the care of these patients over the past 10 to 15 years. Modalities such as intraoperative parathyroid hormone monitoring and radioguided probe utilization are discussed. PMID:19836494

  9. The state of the art of the impact of sampling uncertainty on measurement uncertainty

    Science.gov (United States)

    Leite, V. J.; Oliveira, E. C.

    2018-03-01

    The measurement uncertainty is a parameter that marks the reliability and can be divided into two large groups: sampling and analytical variations. Analytical uncertainty is a controlled process, performed in the laboratory. The same does not occur with the sampling uncertainty, which, because it faces several obstacles and there is no clarity on how to perform the procedures, has been neglected, although it is admittedly indispensable to the measurement process. This paper aims at describing the state of the art of sampling uncertainty and at assessing its relevance to measurement uncertainty.

  10. Pulmonary hypertension-"state of the art" management in 2012.

    Science.gov (United States)

    Saxena, Anita

    2012-01-01

    Pulmonary artery hypertension (PAH) is a pathological condition of small pulmonary arteries, characterised by vascular proliferation and remodelling. The pulmonary artery pressure and pulmonary vascular resistance progressively rise, leading to right heart failure and death. Pulmonary artery hypertension may be secondary to various conditions, or it may be idiopathic where no underlying cause is identifiable. Earlier, only symptomatic treatment was available for such patients which did not change the natural history of the disease. However, over the years, improvement in understanding the pathogenesis has resulted in the development of targeted approaches to the treatment of PAH. Survival advantage has also been shown with some of the pharmacologic agents. This review article discusses the current management strategy for PAH with special emphasis on an idiopathic variety, in an Indian context. Copyright © 2012 Cardiological Society of India. Published by Elsevier B.V. All rights reserved.

  11. The Swedish underground containment studies: state of art

    International Nuclear Information System (INIS)

    Lindbo, T.

    1978-01-01

    Since 1973 studies of underground siting for nuclear power plants have been going on in Sweden. War protection, being the primary aim in accordance with the instructions, the first containment study has lead to siting in rock or in a pit. Rock sitting gives better war protection than pit sitting and also has less affect on the landscape, the cost being about equal. The second study was aimed at surveying the advantages and disadvantages of a rock sited 1000 MW BWA nuclear power plant from a reactor safety standpoint, compared to a plant above ground. Based on the instructions and considerations within the study group, the following criteria for the plant design have been established. (1) The plant should be designed to give protection against external acts of war with conventional weapons. (2) The plant should have a safety level equal to that of an above ground plant. It should fulfil the demands set by the authorities for above ground plants with respect to normal operation and accident. No accidents that can be dealt with above ground may be permitted to result in more serious consequences, nor may they have a higher probability in a plant sited in rock. (3) The design of the plant should moreover utilize the possibilities of improving the safety afforded by rock siting. (Auth.)

  12. Blood tranfusion in critically ill patients: state of the art.

    Science.gov (United States)

    Hajjar, Ludhmila Abrahão; Auler Junior, Jose Otávio Costa; Santos, Luciana; Galas, Filomena

    2007-08-01

    Anemia is one of the most common abnormal findings in critically ill patients, and many of these patients will receive a blood transfusion during their intensive care unit stay. However, the determinants of exactly which patients do receive transfusions remains to be defined and have been the subject of considerable debate in recent years. Concerns and doubts have emerged regarding the benefits and safety of blood transfusion, in part due to the lack of evidence of better outcomes resulting from randomized studies and in part related to the observations that transfusion may increase the risk of infection. As a result of these concerns and of several studies suggesting better or similar outcomes with a lower transfusion trigger, there has been a general tendency to decrease the transfusion threshold from the classic 10 g/dL to lower values. In this review, we focus on some of the key studies providing insight into current transfusion practices and fueling the current debate on the ideal transfusion trigger.

  13. State-of-the-art modeling capabilities for Orimulsion modeling

    International Nuclear Information System (INIS)

    Cekirge, H.M.; Palmer, S.L.; Convery, K.; Ileri, L.

    1996-01-01

    The pollution response of Orimulsion was discussed. Orimulsion is an inexpensive alternative to fuel oil No. 6. It has the capability to heat large industrial and electric utility boilers. It is an emulsion composed of approximately 70% bitumen (a heavy hydrocarbon) and 30% water to which a surfactant has been added. It has a specific gravity of one or higher, so it is of particular concern in the event of a spill. The physical and chemical processes that would take place in an Orimulsion spill were studied and incorporated into the design of the model ORI SLIK, a fate and transport model for marine environments. The most critical decision in using ORI SLIK is the assignment of the number of parcels into which the initial spill volume will be divided since an underspecification would result in inaccurate results. However, no reliable methods for determining this, other than a decision based on trial and error, has been found. It was concluded that while many of the complex processes of Orimulsion in marine environments are approximated in currently available models, some areas still need further study. Among these are the effect of current shear, changing particle densities, and differential settling. 24 refs., 1 tab., 5 figs

  14. Nanoimaging in cardiovascular diseases: Current state of the art

    Directory of Open Access Journals (Sweden)

    Suryyani Deb

    2015-01-01

    Full Text Available Nanotechnology has been integrated into healthcare system in terms of diagnosis as well as therapy. The massive impact of imaging nanotechnology has a deeper intervention in cardiology i.e. as contrast agents , to target vulnerable plaques with site specificity and in a theranostic approach to treat these plaques, stem cell delivery in necrotic myocardium, etc. Thus cardiovascular nanoimaging is not limited to simple diagnosis but also can help real time tracking during therapy as well as surgery. The present review provides a comprehensive description of the molecular imaging techniques for cardiovascular diseases with the help of nanotechnology and the potential clinical implications of nanotechnology for future applications.

  15. [Tinnitus and temporomandibular joint: State of the art].

    Science.gov (United States)

    Lina-Granade, G; Truy, E; Ionescu, E; Garnier, P; Thai Van, H

    2016-12-01

    Tinnitus has been described in temporomandibular joint dysfunction for a long time. Yet, other disorders, such as hearing loss, stress, anxiety and depression, play a major role in the pathophysiology of tinnitus. Temporomandibular joint dysfunctions seem to increase the risk of tinnitus in patients with other predisposing factors. Especially somatosensory tinnitus, which is characterized by sound modulations with neck or mandible movements, is frequently associated with temporomandibular joint dysfunction, but it is not pathognomonic of such a disorder. In such cases, functional therapy of the temporomandibular joint should be part of the multidisciplinary rehabilitation of patients with tinnitus. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  16. Deep Vein Thrombosis Prophylaxis: State of the Art.

    Science.gov (United States)

    Lieberman, Jay R

    2018-03-21

    The selection of a prophylaxis regimen to prevent symptomatic pulmonary embolism and deep vein thrombosis is a balance between efficacy and safety. The latest American Academy of Orthopaedic Surgeons guideline recommended that either chemoprophylaxis or mechanical prophylaxis be used after total joint arthroplasty but did not recommend specific agents. However, the latest evidence-based American College of Chest Physicians guideline recommended a variety of chemoprophylaxis and mechanical agents for a minimum of 10 to 14 days after total joint arthroplasty. Risk stratification is the key to the selection of the appropriate prophylaxis regimen for the individual patient, but the optimal risk stratification protocol still needs to be developed. Copyright © 2018. Published by Elsevier Inc.

  17. MR angiography in portal hypertension: state of the art

    International Nuclear Information System (INIS)

    Vosshenrich, R.; Fischer, U.; Grabbe, E.

    2001-01-01

    When imaging the portal vascular system colour-coded sonography and CT angiography are used as an alternative to intraarterial DSA. Today fast CE 3D- MRA is the imaging modality of choice in the diagnostic of patients with portal hypertension. It enables a clear picture of the portalvenous vascular system and portalsystemic shunts. Statements regarding velocity and direction of blood flow can be made with additional use of TOF and PC techniques. CE-3D MRA can be used preoperatively before liver transplantation or shunt surgery. In the follow-up of interventional or surgical procedures exact statements concerning haemodynamically significant pathologies e.g. vascular thromboses, stenoses and occlusions can be made. Patient consent is symplify and the numbers of complications can be reduced as well as duration of surgery minimized applying this technique (orig.) [de

  18. State-of-the-art in control engineering

    Directory of Open Access Journals (Sweden)

    Štefan Kozák

    2014-05-01

    Full Text Available The paper deals with new trends in research, development and applications of advanced control methods and structures based on the principles of optimality, robustness and intelligence. Present trends in the complex process control design demand an increasing degree of integration of numerical mathematics, control engineering methods, new control structures based of distribution, embedded network control structure and new information and communication technologies. Furthermore, increasing problems with interactions, process non-linearities, operating constraints, time delays, uncertainties, and significant dead-times consequently lead to the necessity to develop more sophisticated control strategies. Advanced control methods and new distributed embedded control structures represent the most effective tools for realizing high performance of many technological processes. Main ideas covered in this paper are motivated namely by the development of new advanced control engineering methods (predictive, hybrid predictive, optimal, adaptive, robust, fuzzy logic, and neural network and new possibilities of their SW and HW realizations and successful implementation in industry.

  19. Multistandard Radio Systems: State of the Art and Research Issues

    DEFF Research Database (Denmark)

    Zakrzewska, Anna; Berger, Michael Stübert; Ruepp, Sarah Renée

    2010-01-01

    Integration of various wireless standards and building one consistent and compatible broadband system is a trend in wireless communication nowadays. This work focuses on multistandard networks enabling the cooperation between LTE and WiMAX systems. It presents the general vision on multistandard ...... systems and current possibilities of such integration. Furthermore, key features and challenges of developing this kind of network are discussed along with the proposed solutions and their performance benefits....

  20. The state of art report on advanced reactor development

    International Nuclear Information System (INIS)

    Kim, Keung Koo; Noh, J. M.; Hwang, D. H. and others

    1999-07-01

    Recently, researches on the advanced power reactors are being performed actively, that maximize the economics and enhance the reactor safety by introducing the inherent safety characteristics and passive safety features. In the development of advanced reactor technology, we developed the inherent core design technologies which can form a foundation of indigenous technologies to provide the basic technology for the core design of the domestic advanced reactor. In this report, we examined the neutronics design technologies and core thermal hydraulics design technologies for advanced reactors performed all over the world. Major efforts are focussed on the soluble boron free core design technology and high conversion core design technology. In addition to these, new conceptual core, such as a supercritical core, design technology development was also reviewed. The characteristics of critical heat flux have been investigated for non-square lattice rod bundles, such as triangular lattice and wire wrap lattice. Based on the status of advanced reactor development, the soluble boron free and hexagonal lattice core design technologies are elementary technology for the domestic advanced reactor core. These elementary core technologies would enhance the reactor safety and improve the economics. (author). 71 refs., 31 tabs., 74 figs

  1. Urban wind energy. State of the Art 2009

    Energy Technology Data Exchange (ETDEWEB)

    Beller, C.

    2009-10-15

    Wind energy in urban areas is a new area and a rather blank page concerning design criteria, aesthetics, concepts, minimizing costs etc. Even though the potential energy in the flow is much higher on the country side or off-shore, the erection of wind turbines in urban areas is carried out and also shows perspectives regarding e. g. direct use of the energy instead of redirecting the energy to the grid and reduction of transmission loss. Within the area of urban wind energy, different applications are to be distinguished. The main groups are turbines integrated in buildings, small turbines on already existing buildings and free standing turbines in public areas. In this report, a look is taken on the mentioned applications, a short introduction to urban climate is given, followed by a list of already existing small turbines which are compared. Examples in between, field tests and experiments support the understanding. An overview of current projects set the application of wind turbines in the urban environment in a relevant perspective. (author)

  2. Cogeneration trends in Europe history -- State of the art - Outlook

    International Nuclear Information System (INIS)

    Hunschofsky, H.

    1998-01-01

    Cogeneration, the utilization of heat created while producing electricity from fossil fuels, is by no means a new technology. In 1926, 71 years ago, a brochure from MAN in Germany showed a heat recovery system for diesel engines. Despite the fact that cogeneration has existed for a long time, it took half a century and the first so called ''oil crisis'' in the 1970's for societies to become aware of limited energy resources. Environmental groups gave cogeneration an additional boost in the 1980's. Additionally, governments in the Western European Nations attracted cogeneration investors by not only providing subsidies and tax breaks but also regulating electricity prices. Although there has been much growth in the cogeneration market in the past years, the industry has still not reached its peak in Europe. A variety of studies have shown that there is still significant growth potential in the future: WWF (World Wildlife Fund) published a study in 1996 suggesting a target of 330 Twh of generation will be produced through cogeneration by the year 2005, a tripling of current generation. Due to the EU's belief that cogeneration is an optimal form of generation, it has developed a cogeneration strategy. As part of this strategy, the EC is promoting cogeneration so that it accounts for 20% of all European generation by the year 2010. These factors would give a variety of companies such as equipment suppliers, investment companies, utilities, consultants and energy brokers a wide range of opportunities in Europe. Detailed information and some hints will be given as to how to participate in this fast growing industry. Ways to overcome obstacles in those markets will be shown as well as the pros and cons of different entry strategies

  3. Lithium: Thionyl chloride battery state-of-the-art assessment

    Energy Technology Data Exchange (ETDEWEB)

    Eisenmann, E.T.

    1996-03-01

    Models of the performance of primary Li/SOCl{sub 2} cells can provide for realistic comparisons between technical information from different sources, and set standards that electronic circuit designers may refer to in the generation of high-quality products. Data from various investigators were used to derive mathematical- statistical relationships with physical design features (e.g. size and materials), operating parameters (e.g. current and temperature) and storage conditions (time and temperature). These efforts were substantially promoted by normalization procedures. For example, current loads were converted into current densities, or if appropriate, into current per unit cathode volume. Similarly, cell capacities were standardized with the maximum values observed at low current and also with respect to the cathode volume. Particular emphasis was placed on evaluations of voltage-delay, cell capacity and self-discharge, for which several equations were established. In spite of a considerable expenditure in time to find high-quality datasets, the reality is that all of the reviewed studies are flawed in one way or another. Specifically, all datasets are afflicted with sizable experimental errors and the precision of the regression equations is much lower than is deemed necessary for a universal model of the lithium thionyl chloride cell. Each of the equations has some definite truth content, but is generally incapable of bridging the gap between different studies. The basic failure to come up with a unifying model for Li/SOCl{sub 2} batteries leaves only one benefit of the present analysis, namely to provide guidance for future investigations. Several recommendations are made based on the insight gained during the search for good data in the relevant literature.

  4. Cloud Computing Cryptography "State-of-the-Art"

    OpenAIRE

    Omer K. Jasim; Safia Abbas; El-Sayed M. El-Horbaty; Abdel-Badeeh M. Salem

    2013-01-01

    Cloud computing technology is very useful in present day to day life, it uses the internet and the central remote servers to provide and maintain data as well as applications. Such applications in turn can be used by the end users via the cloud communications without any installation. Moreover, the end users’ data files can be accessed and manipulated from any other computer using the internet services. Despite the flexibility of data and application accessing and usage that cloud computing e...

  5. State-of-the-Art for Hygrothermal Simulation Tools

    Energy Technology Data Exchange (ETDEWEB)

    Boudreaux, Philip R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); New, Joshua Ryan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shrestha, Som S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Adams, Mark B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pallin, Simon B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-02-01

    The hygrothermal (heat and moisture) performance of buildings can be assessed by utilizing simulation tools. There are currently a number of available hygrothermal calculation tools available which vary in their degree of sophistication and runtime requirements. This report investigates three of the most commonly used models (WUFI, HAMT, and EMPD) to assess their limitations and potential to generate physically realistic results to prioritize improvements for EnergyPlus (which uses HAMT and EMPD). The outcome of the study shows that, out of these three tools, WUFI has the greatest hygrothermal capabilities. Limitations of these tools were also assessed including: WUFI’s inability to properly account for air leakage and transfer at surface boundaries; HAMT’s inability to handle air leakage, precipitationrelated moisture problems, or condensation problems from high relative humidity; and multiple limitations for EMPD as a simplified method to estimate indoor temperature and humidity levels and generally not used to estimate the hygrothermal performance of the building envelope materials. In conclusion, out of the three investigated simulation tools, HAMT has the greatest modeling potential, is open source, and we have prioritized specific features that can enable EnergyPlus to model all relevant heat and moisture transfer mechanisms that impact the performance of building envelope components.

  6. Terminology tools: state of the art and practical lessons.

    Science.gov (United States)

    Cimino, J J

    2001-01-01

    As controlled medical terminologies evolve from simple code-name-hierarchy arrangements, into rich, knowledge-based ontologies of medical concepts, increased demands are placed on both the developers and users of the terminologies. In response, researchers have begun developing tools to address their needs. The aims of this article are to review previous work done to develop these tools and then to describe work done at Columbia University and New York Presbyterian Hospital (NYPH). Researchers working with the Systematized Nomenclature of Medicine (SNOMED), the Unified Medical Language System (UMLS), and NYPH's Medical Entities Dictionary (MED) have created a wide variety of terminology browsers, editors and servers to facilitate creation, maintenance and use of these terminologies. Although much work has been done, no generally available tools have yet emerged. Consensus on requirement for tool functions, especially terminology servers is emerging. Tools at NYPH have been used successfully to support the integration of clinical applications and the merger of health care institutions. Significant advancement has occurred over the past fifteen years in the development of sophisticated controlled terminologies and the tools to support them. The tool set at NYPH provides a case study to demonstrate one feasible architecture.

  7. Power plant engineering: State of the art and perspectives

    International Nuclear Information System (INIS)

    Schilling, H.D.

    1989-01-01

    Power station engineering has a great number of perspectives some of which project far into the future. While nuclear energy will be aimed long-term at further developments in the technology of both large and small-sized high-temperature nuclear reactors and breeder reactors, in the next decades coal-fired power station engineering is expected to undergo a lasting structural change, the beginning of which we are just witnessing. The first phase after World War II was characterized by the transition from bus bar to unit station engineering with its trend towards greater unit outputs and associated structural changes in plant, machinery and control technologies. The second phase is characterized by retrofitting the ending of which is expected by 1993 at the latest when old plants unsuitable for retrofitting will have been shut down. In parallel, measures for extending service lives in both nuclear and fossil fuel installations will increase. A third phase indicates a new generation of power stations which will be characterized by the technologies of fluidized-bed combustion and combined cycles with integrated coal gasification. Again, this phase has already begun and harbours considerable reserves for development. Long-term trends suggest that the vertical structure of energy generation engineering will be abandoned for integrated processes which will be dominated by high-temperature nuclear energy. This considerable potential opens up major perspectives for a lasting reduction of emissions, espec. CO 2 . (orig.) [de

  8. State of the art on phase change material slurries

    International Nuclear Information System (INIS)

    Youssef, Ziad; Delahaye, Anthony; Huang Li; Trinquet, François; Fournaison, Laurence; Pollerberg, Clemens; Doetsch, Christian

    2013-01-01

    Highlights: ► A bibliographic study on PCM slurries. ► Clathrate Hydrate slurry, Microencapsulated PCM Slurry, shape-stabilized PCM slurries and Phase Change Material Emulsions. ► Formation, thermo-physical, rheological, heat transfers properties and applications of these four PCS systems. ► The use of thermal energy storage and distribution based on PCM slurries can improve the refrigerating machine performances. - Abstract: The interest in using phase change slurry (PCS) media as thermal storage and heat transfer fluids is increasing and thus leading to an enhancement in the number of articles on the subject. In air-conditioning and refrigeration applications, PCS systems represent a pure benefit resulting in the increase of thermal energy storage capacity, high heat transfer characteristics and positive phase change temperatures which can occur under low pressures. Hence, they allow the increase of energy efficiency and reduce the quantity of thermal fluids. This review describes the formation, thermo-physical, rheological, heat transfer properties and applications of four PCS systems: Clathrate hydrate slurry (CHS), Microencapsulated Phase Change Materials Slurry (MPCMS), shape-stabilized PCM slurries (SPCMSs) and Phase Change Material Emulsions (PCMEs). It regroups a bibliographic summary of important information that can be very helpful when such systems are used. It also gives interesting and valuable insights on the choice of the most suitable PCS media for laboratory and industrial applications.

  9. Laboratory screening markers in gastroenterology--state of the art.

    Science.gov (United States)

    Kocna, Petr; Vanickova, Zdislava; Zima, Tomas

    2013-06-01

    Screening tests for gastrointestinal diseases acceptable for population with a high sensitivity and high specificity can now be offered by clinical laboratories. This paper summarizes major recent advances in this area of laboratory medicine. Relevant articles published within the last 5 years in the NLM (National Library of Medicine) PubMed - Medline database covering the three gastrointestinal diseases - colorectal cancer, coeliac disease, and atrophic gastritis were included for this overview. In Europe, colorectal cancer (CRCA) is the second most frequent malignant disease. Quantitative immunochemical analysis of the stool for haemoglobin provides the best screening test to date, with both sensitivity and specificity approaching 95%. Even though coeliac disease (CD) affects approximately 1% of the general population, it remains largely unrecognised. Recommended methods for screening currently involve the detection of IgA and IgG antibodies against tissue transglutaminase and deamidated gliadin peptide. Evaluations of screening are now discussed for other diseases of the gastrointestinal tract - such as chronic atrophic gastritis (CAG), and inflammatory bowel disease (IBD). Detection of infection by Helicobacter pylori and stomach-specific plasmatic biomarkers, especially pepsinogen I/II ratio, could help with the prevention of gastric carcinomas. The use of faecal calprotectin as a screening test could substantially reduce the number of invasive methods necessary for the diagnostic work-up of patients with IBD. Screening tests for CRCA and CD have been used worldwide for many years. Screening strategies for gastrointestinal diseases are suggested in the text, based on recent basic science, clinical papers as well as our own experience.

  10. Counting migrants to monitor bird populations: state of the art

    Science.gov (United States)

    Erica H. Dunn

    2005-01-01

    The aim of this paper is to summarize background information on what migration monitoring is, what biases are present and how they can be addressed, evidence that resulting trends are biologically meaningful, and what the benefits and limitations of the method are. Some topics have been covered elsewhere in greater detail (Dunn and Hussell 1995, Dunn et al. 1997,...

  11. Computer-Managed Instruction: State of the Art.

    Science.gov (United States)

    Bozeman, William C.

    1979-01-01

    Summarizes the findings of a report on the current status of systems of computer-managed instruction (CMI). Five systems are reviewed intensively and seventeen others are described briefly. CMI appears to offer potential as a management device but little conclusive evidence exists concerning cost-effectiveness or impact on student achievement.…

  12. DANAIM's state-of-the-art encryption research

    DEFF Research Database (Denmark)

    Boyar, Joan

    2009-01-01

    The University of Southern Denmark together with NIST (National Institute of Standards and Technology - a non-regulatory federal agency with the US Department of Commerce) have jointly created a new invention available for advancing encryption standard S-Box applications....

  13. MR tomography in myocardial ischaemia: present state of the art

    International Nuclear Information System (INIS)

    Szolar, D.H.; Saeed, M.; Higgins, C.B.

    1996-01-01

    Recent developments in MR imaging have opened up new avenues in the investigation of ischaemic heart disease. Conventional unenhanced spin-echo sequences have been used to detect and quantify myocardial infarction. Along with the technical advances aimed at reducing motion artifacts and imaging time, the advent of contrast media for MR imaging has further strengthened its diagnostic capacities. The applications of MR contrast media are increasing, and they are becoming more specific, to enable differentiation of occlusive and reperfused myocardial infarctions and to discriminate between reversible and irreversible myocardial injury. Previous studies have also indicated that dual administration of both relaxivity-based and susceptibility-based contrast media can be used to determine whether viable myocardium is present in the reperfused ischaemic area. Magnetic susceptibility MR contrast media have the potential to demonstrate a region of the ischaemically injured myocardium in which myocardial necrosis is present. A cornestone in the MR assessment of ischaemic heart disease has been achieved with the advent of fast MR imaging techniques. Ultrafast gradient-recalled-echo sequences or echoplanar imaging allow to monitor the first passage of the contrast medium through the heart. With the aid of MR contrast media, these techniques may be useful in estimating regional myocardial perfusion and blood volume. Experimental and clinical perfusion studies indicate that perfusion-sensitive MR imaging, particularly in concert with coronary vasodilators, can detect compromised myocardium. Combining myocardial perfusion imaging with the anatomic and functional information provided by other MR imaging techniques such as cine and velocity-encoded sequences could make MR imaging a comprehensive noninvasive diagnostic tool for the assessment of ischaemic heart disease. (orig.) [de

  14. Cerâmicas bioativas: estado da arte Bioactive ceramics: state of the arts

    Directory of Open Access Journals (Sweden)

    Ângela Leão Andrade

    2006-02-01

    Full Text Available Bioactive glasses undergo corrosion with leaching of alkaline ions when exposed to body fluids. This results in the spontaneous formation of a layer of hydroxyapatite (HA, the mineral component of natural bone, which in turn can induce bone growth in vivo. This paper describes the different types of bioactive glasses, the characterization methods currently used, and the main factors that influence their bioactivity. Nucleation and crystallization, the main mechanisms involved in the formation of hydroxyapatite, Ca10(PO46(OH2, are discussed as a function of the chemical composition and the reactivity of the surface of the material. Finally, promising applications are considered.

  15. Microgrid testbeds around the world: State of art

    International Nuclear Information System (INIS)

    Hossain, Eklas; Kabalci, Ersan; Bayindir, Ramazan; Perez, Ronald

    2014-01-01

    Highlights: • A detail discussion on microgrid project around the world such as North American, Europe, and Japan. • Key benefits of microgrid, issues with on-site generation, features. • Why we need distributed generation system with a brief introduction. • Distributed generation technologies with cost analysis. • The overview on existing distribution network. - Abstract: This paper deals with the recent evolution of microgrids being used around the world in real life applications as well as laboratory application for research. This study is intended to introduce the subject by reviewing the components level, structure and types of microgrid applications installed as a plant or modeled as a simulation environment. The paper also presents a survey regarding published papers on why the microgrid is required, and what the components and control systems are which constitute the actual microgrid studies. It leads the researcher to see the microgrid in terms of the actual bigger picture of today and creates a new outlook about the potential developments. Additionally, comparison of microgrids in various regions based on several parameters allows researchers to define the required criteria and features of a special microgrid that is chosen for a particular scenario. The authors of this paper also tabulated all the necessary information about microgrids, and proposed a standard microgrid for better power quality and optimizing energy generation. Consequently, it is focused on inadequate knowledge and technology gaps in the power system field with regards to the future, and it is this which has been illustrated for the reader. The existing microgrid testbeds all around the world have been studied and analyzed and several of them are explained as an example in this study. Later, those investigated distribution systems are classified based on region (North America, Europe and Asia) and, as presented in literature, a significant amount of deviation has been found

  16. Telerehabilitation: State-of-the-Art from an Informatics Perspective

    Directory of Open Access Journals (Sweden)

    Bambang Parmanto

    2009-09-01

    Full Text Available Rehabilitation service providers in rural or underserved areas are often challenged in meeting the needs of their complex patients due to limited resources in their geographical area. Recruitment and retention of the rural clinical workforce are beset by the ongoing problems associated with limited continuing education opportunities, professional isolation, and the challenges inherent to coordinating rural community healthcare. People with disabilities who live in rural communities also face challenges accessing healthcare. Traveling long distances to a specialty clinic for necessary expertise is troublesome due to inadequate or unavailable transportation, disability specific limitations, and financial limitations. Distance and lack of access are just two threats to quality of care that now being addressed by the use of videoconferencing, information exchange, and other telecommunication technologies that facilitate telerehabilitation. This white paper illustrates and summarizes clinical and vocational applications of telerehabilitation. We provide definitions related to the fields of telemedicine, telehealth, and telerehabilitation, and consider the impetus for telerehabilitation. We review the telerehabilitation literature for assistive technology applications, pressure ulcer prevention, virtual reality applications, speech-language pathology applications, seating and wheeled mobility applications, vocational rehabilitation applications, and cost-effectiveness. We then discuss external telerehabilitation influencers, such as the positions of professional organizations. Finally, we summarize clinical and policy issues in a limited context appropriate to the scope of this paper. Keywords: Telerehabilitation, Telehealth,Telemedicine, Telepractice

  17. Calcium Orthophosphates as Bioceramics: State of the Art

    Directory of Open Access Journals (Sweden)

    Sergey V. Dorozhkin

    2010-11-01

    Full Text Available In the late 1960s, much interest was raised in regard to biomedical applications of various ceramic materials. A little bit later, such materials were named bioceramics. This review is limited to bioceramics prepared from calcium orthophosphates only, which belong to the categories of bioactive and bioresorbable compounds. There have been a number of important advances in this field during the past 30–40 years. Namely, by structural and compositional control, it became possible to choose whether calcium orthophosphate bioceramics were biologically stable once incorporated within the skeletal structure or whether they were resorbed over time. At the turn of the millennium, a new concept of calcium orthophosphate bioceramics—which is able to promote regeneration of bones—was developed. Presently, calcium orthophosphate bioceramics are available in the form of particulates, blocks, cements, coatings, customized designs for specific applications and as injectable composites in a polymer carrier. Current biomedical applications include artificial replacements for hips, knees, teeth, tendons and ligaments, as well as repair for periodontal disease, maxillofacial reconstruction, augmentation and stabilization of the jawbone, spinal fusion and bone fillers after tumor surgery. Exploratory studies demonstrate potential applications of calcium orthophosphate bioceramics as scaffolds, drug delivery systems, as well as carriers of growth factors, bioactive peptides and/or various types of cells for tissue engineering purposes.

  18. HyPer Family Probes: State of the Art.

    Science.gov (United States)

    Bilan, Dmitry S; Belousov, Vsevolod V

    2016-05-01

    Hydrogen peroxide (H2O2) is not only a key mediator of oxidative stress but also one of the most important cellular second messengers. This small short-lived molecule is involved in the regulation of a wide range of different biological processes, including regulation of cellular signaling pathways. Studying the role of H2O2 in living systems would be challenging without modern approaches. A genetically encoded fluorescent biosensor, HyPer, is one of the most effective tools for this purpose. HyPer has been used by many investigators of redox signaling in various models of different scales: from cytoplasmic subcompartments and single cells to tissues of whole organisms. In many studies, the results obtained using HyPer have enabled a better understanding of the roles of H2O2 in these biological processes. However, much remains to be learned. In this review, we focus on the uses of HyPer. We provide a general description of HyPer and its improved versions. Separate chapters are devoted to the results obtained by various groups who have used this biosensor for their experiments in living cells and organisms. HyPer is an effective tool for H2O2 imaging in living systems as indicated by the increasing numbers of publications each year since its development. However, this biosensor requires further improvements. In particular, much brighter and more pH-stable versions of HyPer are necessary for imaging in mammalian tissues. Antioxid. Redox Signal. 24, 731-751.

  19. Safe and Sustainable Tall Buildings - State of the Art

    Directory of Open Access Journals (Sweden)

    Mendis P.

    2012-01-01

    Full Text Available Tall buildings are becoming very popular around the world. Asia will have most of the tall buildings in this century. Both safety and sustainability aspects are important in planning and designing these buildings. The design and construction of tall buildings present many challenges for the design team, from engineers, architect through to the builder. Although structural systems could be developed and construction solutions could be found to design and construct very tall buildings in excess of 1 km (even 1 mile, other aspects such as fire and egress, long-term movements, environmental wind and perception of motion (including damping for dynamic effects, transportation (lifts issues, sustainability, durability and maintenance will govern and may even restrict the heights. Current practices and important issues related to design of safe and sustainable design of tall buildings are discussed in this paper.

  20. Targeted radiotherapy: state of the art and perspectives

    International Nuclear Information System (INIS)

    Vuillez, J.P.

    2006-01-01

    Internal targeted radiotherapy (previously called metabolic radiotherapy) consists in an in situ irradiation of small tumour lesions all through the body by mean of a radiolabeled agent. It is a more and more emerging technique of cancer treatment, as clearly demonstrated by theoretical and experimental considerations, but also impressive clinical results. Published results allowed the marketing authorization of several specialities at time. Main clinical results, i.e. these obtained with radiolabel antibodies, somatostatin analogs and bone seeking agents, already are very convincing. However, we must wonder if such conclusive results would remain anecdotal in the treatment of cancer, or take a larger and larger place. Recently published results and works in progress clearly show that there are a lot of possibilities which could be explored and many ways of improvement. These possibilities are related to the mechanisms of action, a better understanding of the relationship between injected activity and efficiency through dedicated dosimetry, new radiopharmaceuticals, new targets and a better definition of indications. The review of these different ways leads to an optimistic view of the future for internal radiotherapy, providing it will be thought through a pluri-disciplinary approach. (author)

  1. Apoptosis imaging: current state of the art and future perspective

    International Nuclear Information System (INIS)

    Wang Feng; Wang Zizheng

    2007-01-01

    This review provides a critical and thorough overview of the radionpharmaceutical development and in vivo evaluation of all apoptosis-detecting radioligands that emerged so far, along with these possible applications in nuclear medicine. Radiolabelled annexin bears the promise of becoming a clinically applied radio-pharmaceutical with potential applications in cardiology and oncology. Visualization of cell death is important in pathologies such as myocardial infarction, atherosclerosis, and cancer. Furthermore, radiolabelled annexin may be developed as a tool for monitoring cell death-induceing or cell death-preventing therapies. Some future perspective are presented with the aim of promoting the development of potential new strategies in pursuit of the idealcell death-detecting radioligand. (authors)

  2. Hydrogen storage on carbon materials: state of the art

    International Nuclear Information System (INIS)

    D Cazorla Amoros; D Lozano Castello; F Suarez Garcia; M Jorda Beneytoa; A Linares Solano

    2005-01-01

    Full text of publication follows: From an economic point of view, the use of hydrogen could revolutionize energy and transportation markets, what generates a great interest towards this fuel. This interest has led to the so-called 'hydrogen economy'. However, the main drawback for the use of hydrogen as transportation fuel or in power generation is the storage of this gas to reach a sufficiently high energy density, which could fit to the goals of the DOE hydrogen plan to automotive fuel cell systems i.e. 62 kg H 2 /m 3 ). [1] A review of both experimental and theoretical studies published on the field of hydrogen storage on carbon materials (nano-tubes, nano-fibers and porous carbons) shows a large dispersion in hydrogen storage values. Although some values have exceeded by far the goals of the DOE [2], other authors assure that it is not feasible the use of carbonaceous materials as hydrogen storage systems [3]. The first objective of this presentation is to analyze some possible reasons of the large values dispersion. The discrepancy among the different theoretical studies can be due to non-realist models or to unsuitable approaches. High results dispersion and low reproducibility of experimental measurements are mostly consequence of experimental errors (as for example, the use of small amount of sample) and/or to the use of non-purified materials. In fact, the main disadvantage of the use of novel carbon materials, such as nano-tubes and nano-fibers, is the unavailability of large amounts of those materials with sufficient purity in order to get both feasible measurements in the laboratory, an their subsequent use in large scale. In addition to these possible reasons of errors, for a better understanding of the large results dispersion, the different mechanism of hydrogen storage, such as hydride formation, hydrogen transfer and hydrogen adsorption will be also reviewed in this presentation. Differently to nano-tubes and nano-fibers, activated carbons are

  3. Hydrogen storage on carbon materials: state of the art

    International Nuclear Information System (INIS)

    Cazorla-Amoros, D.; Lozano-Castello, D.; Suarez-Garcia, F.; Jorda-Beneyto, M.; Linares-Solano, A.

    2005-01-01

    Complete text of publication follows: From an economic point of view, the use of hydrogen could revolutionize energy and transportation markets, what generates a great interest towards this fuel. This interest has led to the so-called 'hydrogen economy'. However, the main drawback for the use of hydrogen as transportation fuel or in power generation is the storage of this gas to reach a sufficiently high energy density, which could fit to the goals of the DOE hydrogen plan to automotive fuel cell systems i.e. 62 kg H 2 /m 3 ) [1]. A review of both experimental and theoretical studies published on the field of hydrogen storage on carbon materials (nano-tubes, nano-fibers and porous cartons) shows a large dispersion in hydrogen storage values. Although some values have exceeded by far the goals of the DOE [2], other authors assure that it is not feasible the use of carbonaceous materials as hydrogen storage systems [3]. The first objective of this presentation is to analyze some possible reasons of the large values dispersion. The discrepancy among the different theoretical studies can be due to non-realist models or to unsuitable approaches. High results dispersion and low reproducibility of experimental measurements are mostly consequence of experimental errors (as for example, the use of small amount of sample) and/or to the use of non-purified materials. In fact, the main disadvantage of the use of novel carbon materials, such as nano-tubes and nano-fibers, is the unavailability of large amounts of those materials with sufficient purity in order to get both feasible measurements in the laboratory, an their subsequent use in large scale. In addition to these possible reasons of errors, for a better understanding of the large results dispersion, the different mechanism of hydrogen storage, such as hydride formation, hydrogen transfer and hydrogen adsorption will be also reviewed in this presentation. Differently to nano-tubes and nano-fibers, activated carbons are

  4. State-of-the-art methods for testing materials outdoors

    Science.gov (United States)

    R. Sam Williams

    2004-01-01

    In recent years, computers, sensors, microelectronics, and communication technologies have made it possible to automate the way materials are tested in the field. It is now possible to purchase monitoring equipment to measure weather and materials properties. The measurement of materials response often requires innovative approaches and added expense, but the...

  5. Decentralized biomass combustion: State of the art and future development

    NARCIS (Netherlands)

    Obernberger, I.

    1998-01-01

    The present amount of biomass used for heat, and to a smaller extent electricity production, is already considerable in several European countries but the potential unused in Europe is even higher. Combustion is the most mature conversion technology utilized for biomass. The systems addressed in

  6. Urban Wind Energy - State of the Art 2009

    DEFF Research Database (Denmark)

    Beller, Christina

    Wind energy in urban areas is a new area and a rather blank page concerning design criteria, aesthetics, concepts, minimizing costs etc. Even though the potential energy in the flow is much higher on the country side or off-shore, the erection of wind turbines in urban areas is carried out and also...

  7. Magnetocaloric refrigeration concepts: current state of the art

    DEFF Research Database (Denmark)

    Nielsen, Kaspar Kirstein

    2014-01-01

    Refrigeration devices based on the magnetocaloric effect have been prototyped in great numbers during the past decade. The search for the optimal combination of magnetic field source, regenerator geometry, magnetocaloric material composition and flow system design has resulted in a variety...

  8. Additive manufacturing: state-of-the-art and application framework

    Directory of Open Access Journals (Sweden)

    Vinícius Picanço Rodrigues

    2017-09-01

    Full Text Available Additive manufacturing encompasses a class of production processes with increasing applications in different areas and supply chains. Due to its flexibility for production in small batches and the versatility of materials and geometries, this technology is recognized as being capable of revolutionizing the production processes as well as changing production strategies that are currently employed. However, there are different technologies under the generic label of additive manufacturing, materials and application areas with different requirements. Given the growing importance of additive manufacturing as a production process, and also considering the need to have a better insight into the potential applications for driving research and development efforts, this article presents a proposal of organization for additive manufacturing applications in seven areas. Additionally, the article provides a panorama of the current development stage of this technology, with a review of its major technological variants. The results presented aim to serve as a basis to support driving initiatives in additive manufacturing in companies, development agencies and research institutions.

  9. Occupational exposure limits for nanomaterials: state of the art

    Science.gov (United States)

    Schulte, P. A.; Murashov, V.; Zumwalde, R.; Kuempel, E. D.; Geraci, C. L.

    2010-08-01

    Assessing the need for and effectiveness of controlling airborne exposures to engineered nanomaterials in the workplace is difficult in the absence of occupational exposure limits (OELs). At present, there are practically no OELs specific to nanomaterials that have been adopted or promulgated by authoritative standards and guidance organizations. The vast heterogeneity of nanomaterials limits the number of specific OELs that are likely to be developed in the near future, but OELs could be developed more expeditiously for nanomaterials by applying dose-response data generated from animal studies for specific nanoparticles across categories of nanomaterials with similar properties and modes of action. This article reviews the history, context, and approaches for developing OELs for particles in general and nanoparticles in particular. Examples of approaches for developing OELs for titanium dioxide and carbon nanotubes are presented and interim OELs from various organizations for some nanomaterials are discussed. When adequate dose-response data are available in animals or humans, quantitative risk assessment methods can provide estimates of adverse health risk of nanomaterials in workers and, in conjunction with workplace exposure and control data, provide a basis for determining appropriate exposure limits. In the absence of adequate quantitative data, qualitative approaches to hazard assessment, exposure control, and safe work practices are prudent measures to reduce hazards in workers.

  10. Occupational exposure limits for nanomaterials: state of the art

    International Nuclear Information System (INIS)

    Schulte, P. A.; Murashov, V.; Zumwalde, R.; Kuempel, E. D.; Geraci, C. L.

    2010-01-01

    Assessing the need for and effectiveness of controlling airborne exposures to engineered nanomaterials in the workplace is difficult in the absence of occupational exposure limits (OELs). At present, there are practically no OELs specific to nanomaterials that have been adopted or promulgated by authoritative standards and guidance organizations. The vast heterogeneity of nanomaterials limits the number of specific OELs that are likely to be developed in the near future, but OELs could be developed more expeditiously for nanomaterials by applying dose-response data generated from animal studies for specific nanoparticles across categories of nanomaterials with similar properties and modes of action. This article reviews the history, context, and approaches for developing OELs for particles in general and nanoparticles in particular. Examples of approaches for developing OELs for titanium dioxide and carbon nanotubes are presented and interim OELs from various organizations for some nanomaterials are discussed. When adequate dose-response data are available in animals or humans, quantitative risk assessment methods can provide estimates of adverse health risk of nanomaterials in workers and, in conjunction with workplace exposure and control data, provide a basis for determining appropriate exposure limits. In the absence of adequate quantitative data, qualitative approaches to hazard assessment, exposure control, and safe work practices are prudent measures to reduce hazards in workers.

  11. 3D detectors-state of the art

    Energy Technology Data Exchange (ETDEWEB)

    Kok, A. [Brunel University, Uxbridge, UB8 3PH (United Kingdom)]. E-mail: angela.kok@cern.ch; Anelli, G. [CERN, CH-1211 Geneva 23 (Switzerland); Da Via, C. [Brunel University, Uxbridge, UB8 3PH (United Kingdom); Hasi, J. [Brunel University, Uxbridge, UB8 3PH (United Kingdom); Jarron, P. [CERN, CH-1211 Geneve 23 (Switzerland); Kenney, C. [Molecular Biology Consortium, Chicago (United States); Morse, J. [European Synchrontron Radiation Facility (ESRF), Grenoble 38043 (France); Parker, S. [University of Hawaii, Manoa (United States); Segal, J. [Molecular Biology Consortium, Chicago (United States); Watts, S. [Brunel University, Uxbridge, UB8 3PH (United Kingdom); Westbrook, E. [Molecular Biology Consortium, Chicago (United States)

    2006-05-01

    3D detectors, with electrodes penetrating through the silicon substrate were fabricated, and characteristics such as speed, radiation hardness and edge sensitivity were studied. The signal shape was observed using a fast, low-noise transimpedance amplifier. The rise time of the signal obtained for a minimum ionizing particle was faster than 3ns at room temperature. This is in agreement with earlier calculations of 3D sensors that showed the charge collection time to be between 1 and 2ns. Similar tests were performed on detectors after exposure to proton beams with doses (1.8x10{sup 15}24GeVprotons/cm{sup 2}) equivalent to those expected after 10 years at the innermost layers of the ATLAS experiment at the large hadron collider (LHC). Edge sensitivity was measured at the advanced light source at Lawrence Berkeley Laboratory, using an X-ray micro-beam. The detectors were measured to be efficient up to less than 10{mu}m from their physical edges. Results presented in this paper confirm the suitability of this design for possible future LHC upgrades, where the integrated fluence is expected to increase by a factor of 10. Moreover, their speed characteristics have placed them as potential candidates for the CERN linear collider (CLIC) where the bunch-crossing separation can be as short as 1.2ns.

  12. 3D detectors-state of the art

    International Nuclear Information System (INIS)

    Kok, A.; Anelli, G.; Da Via, C.; Hasi, J.; Jarron, P.; Kenney, C.; Morse, J.; Parker, S.; Segal, J.; Watts, S.; Westbrook, E.

    2006-01-01

    3D detectors, with electrodes penetrating through the silicon substrate were fabricated, and characteristics such as speed, radiation hardness and edge sensitivity were studied. The signal shape was observed using a fast, low-noise transimpedance amplifier. The rise time of the signal obtained for a minimum ionizing particle was faster than 3ns at room temperature. This is in agreement with earlier calculations of 3D sensors that showed the charge collection time to be between 1 and 2ns. Similar tests were performed on detectors after exposure to proton beams with doses (1.8x10 15 24GeVprotons/cm 2 ) equivalent to those expected after 10 years at the innermost layers of the ATLAS experiment at the large hadron collider (LHC). Edge sensitivity was measured at the advanced light source at Lawrence Berkeley Laboratory, using an X-ray micro-beam. The detectors were measured to be efficient up to less than 10μm from their physical edges. Results presented in this paper confirm the suitability of this design for possible future LHC upgrades, where the integrated fluence is expected to increase by a factor of 10. Moreover, their speed characteristics have placed them as potential candidates for the CERN linear collider (CLIC) where the bunch-crossing separation can be as short as 1.2ns

  13. Image-guided breast biopsy: state-of-the-art

    Energy Technology Data Exchange (ETDEWEB)

    O' Flynn, E.A.M., E-mail: lizoflynn@doctors.org.u [South East London Breast Screening Programme and National Breast Screening Training Centre, Kings College Hospital NHS Foundation Trust, London SE5 9RS (United Kingdom); Wilson, A.R.M.; Michell, M.J. [South East London Breast Screening Programme and National Breast Screening Training Centre, Kings College Hospital NHS Foundation Trust, London SE5 9RS (United Kingdom)

    2010-04-15

    Percutaneous image-guided breast biopsy is widely practised to evaluate predominantly non-palpable breast lesions. There has been steady development in percutaneous biopsy techniques. Fine-needle aspiration cytology was the original method of sampling, followed in the early 1990s by large core needle biopsy. The accuracy of both has been improved by ultrasound and stereotactic guidance. Larger bore vacuum-assisted biopsy devices became available in the late 1990s and are now commonplace in most breast units. We review the different types of breast biopsy devices currently available together with various localization techniques used, focusing on their advantages, limitations and current controversial clinical management issues.

  14. State of the Art in Tumor Antigen and Biomarker Discovery

    International Nuclear Information System (INIS)

    Even-Desrumeaux, Klervi; Baty, Daniel; Chames, Patrick

    2011-01-01

    Our knowledge of tumor immunology has resulted in multiple approaches for the treatment of cancer. However, a gap between research of new tumors markers and development of immunotherapy has been established and very few markers exist that can be used for treatment. The challenge is now to discover new targets for active and passive immunotherapy. This review aims at describing recent advances in biomarkers and tumor antigen discovery in terms of antigen nature and localization, and is highlighting the most recent approaches used for their discovery including “omics” technology

  15. State of the art in monitoring respirable mine aerosols

    Energy Technology Data Exchange (ETDEWEB)

    Volkwein, J.C.; Mischler, S.E.; Thimons, E.D.; Timko, R.J.; Kissell, F.N.

    2005-07-01

    The Centers for Disease Control and Prevention (CDC), National Institute for Occupational Safety and Health (NIOSH) has been developing several new tools to help miners monitor respirable coal dust, silica, and diesel particulate matter. This paper discusses three main topics. First, the latest results of the person wearable dust monitor (PDM), developed by Rupprecht and Patashnick under CDC contract. The PDM was tested side by side with conventional samplers at a number of US coal mines and results indicated that the PDM was comparable to conventional samplers. Second, improvements to the Dust Dosimeter monitoring technique that includes a new pump with built in pressure transducer and algorithm to convert differential pressure to dust concentration have shown good precision. Third, advances in the use of the detector tube technique to monitor tailpipe diesel emissions and ambient diesel particulate matter show that strong correlations exist between differential pressure measurement and elemental carbon in the samplers. 3 figs.

  16. Additive manufacturing: state-of-the-art and application framework

    DEFF Research Database (Denmark)

    Rodrigues, Vinicius Picanco; de Senzi Zancul, Eduardo; Gonçalves Mançanares, Cauê

    2017-01-01

    Additive manufacturing encompasses a class of production processes with increasing applications indifferent areas and supply chains. Due to its flexibility for production in small batches and the versatilityof materials and geometries, this technology is recognized as being capable...... of revolutionizing theproduction processes as well as changing production strategies that are currently employed. However,there are different technologies under the generic label of additive manufacturing, materials and applicationareas with different requirements. Given the growing importance of additive...... manufacturingas a production process, and also considering the need to have a better insight into the potential applicationsfor driving research and development efforts, this article presents a proposal of organizationfor additive manufacturing applications in seven areas. Additionally, the article provides...

  17. Battery systems. State of the art; Batteriesysteme. Stand der Technik

    Energy Technology Data Exchange (ETDEWEB)

    Jossen, Andreas; Doering, Harry [Zentrum fuer Sonnenenergie- und Wasserstoff-Forschung, Ulm (Germany)

    2009-07-01

    Due to the emergence of electromobility and the increase in the fluctuating supply of renewable energy (wind and PV) electrical storage systems are gaining in importance again. In the area of electromobility they have even become a key technology. In the electromobile sector a clear decision in favour of Li ion batteries has already been evident for some time. None of the other technologies are being discussed any longer with regard to this application. Hybrid vehicles today mostly use NiMH storages, but this area too will see the entry of Li ion batteries. In the microhybrid area the improvements achieved with lead batteries will play an important role. Regarding stationary systems there is as yet no such clear-cut focus on any single technology to be observed, but rather a number of technologies being developed and tested concurrently. Redox flow batteries and high temperature batteries will play an important role here. However, lithium ion systems will try to get a foot in the door in this area as well.

  18. State of the art: Rescue intubation through supraglottic airways

    Directory of Open Access Journals (Sweden)

    R. Hofmeyr*

    2013-12-01

    Full Text Available The use of supraglottic airways as rescue devices in failed intubation and resuscitation has become well accepted in emergency practice. Many offer or advertise the possibility of intubation through the device, but techniques and success rates vary greatly. Intubation can be achieved blindly, with the use a bougie or introducer, or with fiberoptic guidance. In this review, I examine the evidence behind different devices with various techniques, present the data from our on-going research, suggest further research directions and propose practical guidelines for clinical use in emergencies.

  19. Multimodality image registration with software: state-of-the-art

    Energy Technology Data Exchange (ETDEWEB)

    Slomka, Piotr J. [Cedars-Sinai Medical Center, AIM Program/Department of Imaging, Los Angeles, CA (United States); University of California, David Geffen School of Medicine, Los Angeles, CA (United States); Baum, Richard P. [Center for PET, Department of Nuclear Medicine, Bad Berka (Germany)

    2009-03-15

    Multimodality image integration of functional and anatomical data can be performed by means of dedicated hybrid imaging systems or by software image co-registration techniques. Hybrid positron emission tomography (PET)/computed tomography (CT) systems have found wide acceptance in oncological imaging, while software registration techniques have a significant role in patient-specific, cost-effective, and radiation dose-effective application of integrated imaging. Software techniques allow accurate (2-3 mm) rigid image registration of brain PET with CT and MRI. Nonlinear techniques are used in whole-body image registration, and recent developments allow for significantly accelerated computing times. Nonlinear software registration of PET with CT or MRI is required for multimodality radiation planning. Difficulties remain in the validation of nonlinear registration of soft tissue organs. The utilization of software-based multimodality image integration in a clinical environment is sometimes hindered by the lack of appropriate picture archiving and communication systems (PACS) infrastructure needed to efficiently and automatically integrate all available images into one common database. In cardiology applications, multimodality PET/single photon emission computed tomography and coronary CT angiography imaging is typically not required unless the results of one of the tests are equivocal. Software image registration is likely to be used in a complementary fashion with hybrid PET/CT or PET/magnetic resonance imaging systems. Software registration of stand-alone scans ''paved the way'' for the clinical application of hybrid scanners, demonstrating practical benefits of image integration before the hybrid dual-modality devices were available. (orig.)

  20. Multimodality image registration with software: state-of-the-art

    International Nuclear Information System (INIS)

    Slomka, Piotr J.; Baum, Richard P.

    2009-01-01

    Multimodality image integration of functional and anatomical data can be performed by means of dedicated hybrid imaging systems or by software image co-registration techniques. Hybrid positron emission tomography (PET)/computed tomography (CT) systems have found wide acceptance in oncological imaging, while software registration techniques have a significant role in patient-specific, cost-effective, and radiation dose-effective application of integrated imaging. Software techniques allow accurate (2-3 mm) rigid image registration of brain PET with CT and MRI. Nonlinear techniques are used in whole-body image registration, and recent developments allow for significantly accelerated computing times. Nonlinear software registration of PET with CT or MRI is required for multimodality radiation planning. Difficulties remain in the validation of nonlinear registration of soft tissue organs. The utilization of software-based multimodality image integration in a clinical environment is sometimes hindered by the lack of appropriate picture archiving and communication systems (PACS) infrastructure needed to efficiently and automatically integrate all available images into one common database. In cardiology applications, multimodality PET/single photon emission computed tomography and coronary CT angiography imaging is typically not required unless the results of one of the tests are equivocal. Software image registration is likely to be used in a complementary fashion with hybrid PET/CT or PET/magnetic resonance imaging systems. Software registration of stand-alone scans ''paved the way'' for the clinical application of hybrid scanners, demonstrating practical benefits of image integration before the hybrid dual-modality devices were available. (orig.)

  1. Czech safety concept: 2013 state of the art

    International Nuclear Information System (INIS)

    Vokal, Antonin; Slovak, Jiri

    2014-01-01

    The Czech Republic operates four WWER 440 reactors (Dukovany) and two WWER 1000 reactors (Temelin). The four 440 MW Dukovany units were installed and began operation during the period 1985-1988. The two WWER 1000 reactors at Temelin started operation in 2002 and 2003. Currently, more than 8000 SF assemblies from WWER 440 reactors and 900 spent assemblies from WWER 1000 reactors spent fuel assemblies are stored in dry storage facilities located in the area of both NPP in approved casks or in pools at reactor sites. More than 4 000 assemblies are expected to be spent by 2025 at Dukovany reactors and 4 600 assemblies by 2042 at Temelin reactors. The multi-billion Euro contract to build two new nuclear reactors at the current site of Temelin with the option for an additional one in Dukovany has recently been launched in the Czech Republic. It is expected that more than 8 000 fuel assemblies would be spent in the three new nuclear reactors in the Czech Republic during their 60 years of electricity production. The basic reference plan is to directly dispose of all of the spent fuel assemblies in a deep geological repository (DGR), starting operation not earlier than in 2065. The DGR is planned to be located in granite host rock, because no other type of host rock in sufficient volume is available in the Czech Republic. Currently seven candidate sites for DGR suitable for geological disposal of SF assemblies have been selected, but due to negative community attitudes at the notion of have a repository in their backyard, they are still awaiting a detailed geological survey. According to proposed reference designs, SF assemblies should be in steel-based canisters emplaced in vertical or horizontal boreholes in granite host rock at approximately 500 m under the surface and surrounded by compacted bentonite. The Czech safety concept is based on the KBS-3 concept developed in Sweden. The Swedish concept is primarily based on almost thermodynamic stability of copper overpack in

  2. State of the Art: Novel Applications for Deep Brain Stimulation.

    Science.gov (United States)

    Roy, Holly A; Green, Alexander L; Aziz, Tipu Z

    2018-02-01

    Deep brain stimulation (DBS) is a rapidly developing field of neurosurgery with potential therapeutic applications that are relevant to conditions traditionally viewed as beyond the limits of neurosurgery. Our objective, in this review, is to highlight some of the emerging applications of DBS within three distinct but overlapping spheres, namely trauma, neuropsychiatry, and autonomic physiology. An extensive literature review was carried out in MEDLINE, to identify relevant studies and review articles describing applications of DBS in the areas of trauma, neuropsychiatry and autonomic neuroscience. A wide range of applications of DBS in these spheres was identified, some having only been tested in one or two cases, others much better studied. We have identified various avenues for DBS to be applied for patient benefit in cases relevant to trauma, neuropsychiatry and autonomic neuroscience. Further developments in DBS technology and clinical trial design will enable these novel applications to be effectively and rigorously assessed and utilized most effectively. © 2017 International Neuromodulation Society.

  3. Radiation-effects state of the art 1965-1966

    Energy Technology Data Exchange (ETDEWEB)

    Hamman, D.J.; Drennan, J.E.; Veazie, W.H.; Shober, F.R.; Leach, E.R.

    1966-06-30

    Developments in the field of radiation effects on electronic components including semiconductors, polymetric materials, lubricants, flotation fluids, hydraulic fluids, structural metals and alloys, ceramics, space radiation environment, dosimetry, and ceramic and metallic fuel materials are reviewed. Programs currently being conducted in radiation effects are briefly given for each section of the report.

  4. Sugar dosimeters. Part 1. State of the art

    International Nuclear Information System (INIS)

    Peimel-Stuglik, Z.

    2008-01-01

    A review of the literature dealing with the possibility of using sugars, in particular sucrose, as dosimetric material is presented. All methods involved were divided according to analytical techniques used in dosimetric signal measurements (polarimetry, spectrophotometry and electron paramagnetic resonance - EPR). Double-signal sugar dosimeters (EPR + spectrophotometry) are also described. (author) [pl

  5. STEM and Technology Education: International State-of-the-Art

    Science.gov (United States)

    Ritz, John M.; Fan, Szu-Chun

    2015-01-01

    This paper reports the perceptions of 20 international technology education scholars on their country's involvement in science, technology, engineering, and mathematics (STEM) education. Survey research was used to obtain data. It was found that the concept of STEM education is being discussed differently by nations. Some consider STEM education…

  6. Wind energy in Italy: state of the art and prospects

    International Nuclear Information System (INIS)

    Togni, S.

    2009-01-01

    Among renewable energy sources wind energy has the greatest potential as well as good prospects even in occupational terms. Yet a solution is still to be found to problems related to plant authorization procedures, inadequacy of the national electric grid, regularisation of trading authorisation procedures. [it

  7. State of the Art in Photon-Density Estimation

    DEFF Research Database (Denmark)

    Hachisuka, Toshiya; Jarosz, Wojciech; Georgiev, Iliyan

    2013-01-01

    scattering. Since its introduction, photon-density estimation has been significantly extended in computer graphics with the introduction of: specialized techniques that intelligently modify the positions or bandwidths to reduce visual error using a small number of photons, approaches that eliminate error...

  8. State of the Art in Photon Density Estimation

    DEFF Research Database (Denmark)

    Hachisuka, Toshiya; Jarosz, Wojciech; Bouchard, Guillaume

    2012-01-01

    scattering. Since its introduction, photon-density estimation has been significantly extended in computer graphics with the introduction of: specialized techniques that intelligently modify the positions or bandwidths to reduce visual error using a small number of photons, approaches that eliminate error...

  9. Kinetic Studies on State of the Art Solid Oxide Cells

    DEFF Research Database (Denmark)

    Njodzefon, Jean-Claude; Graves, Christopher R.; Hjelm, Johan

    2014-01-01

    of the technology, cell optimization and eventual commercialisation requires a sound understanding of the mechanisms that affect performance and stability. These mechanisms depend on operation conditions like temperature, gas composition, fuel utilisation and current load as well as on gradients along cell...

  10. QUINCE System; State-of-the-Art Review

    Science.gov (United States)

    1978-06-01

    than "colorless green ideas sleep furiously" — at this period, however, the second of these strings was considered to be grammatical, a status which...primitives. Athenalon Verlag. Milks, Y.A. 1972. Gramar, meaning and the machine analysis of language. London: Routledge and Kegan Paul. . 1973a. An

  11. Plastic heat exchangers: a state-of-the-art review

    Energy Technology Data Exchange (ETDEWEB)

    Miller, D; Holtz, R E; Koopman, R N; Marciniak, T J; MacFarlane, D R

    1979-07-01

    Significant increases in energy utilization efficiency can be achieved through the recovery of low-temperature rejected heat. This energy conserving possibility provides incentive for the development of heat exchangers which could be employed in applications where conventional units cannot be used. Some unique anticorrosion and nonstick characteristics of plastics make this material very attractive for heat recovery where condensation, especially sulfuric acid, and fouling occur. Some of the unique characteristics of plastics led to the commercial success of DuPont's heat exchangers utilizing polytetrafluoroethylene (trade name Teflon) tubes. Attributes which were exploited in this application were the extreme chemical inertness of the material and its flexibility, which enabled utilization in odd-shaped spaces. The wide variety of polymeric materials available ensures chemical inertness for almost any application. Lower cost, compoundability with fillers to improve thermal/mechanical properties, and versatile fabrication methods are incentives for many uses. Also, since many plastics resist corrosion, they can be employed in lower temperature applications (< 436 K), where condensation can occur and metal units have been unable to function. It is clear that if application and design can be merged to produce a cost-effective alternate to present methods of handling low-temperature rejected heat, then there is significant incentive for plastic heat exchangers, to replace traditional metallic heat exchangers or to be used in services where metals are totally unsuited.

  12. State of the art and trends for digital pathology.

    Science.gov (United States)

    García Rojo, Marcial

    2012-01-01

    Anatomic pathology is a medical specialty where both information management systems and digital images systems paly a most important role. Digital pathology is a new concept that considers all uses of this information, including diagnosis, biomedical research and education. Virtual microscopy or whole slide imaging, resulting in digital slides, is an outreaching technology in anatomic pathology. Limiting factors in the expansion of virtual microscopy are formidable storage dimension, scanning speed, quality of image and cultural change. Anatomic pathology data and images should be an important part of the patient electronic health records as well as of clinical data warehouse, epidemiological or biomedical research databases, and platforms dedicated to translational medicine. Integrating anatomic pathology to the "healthcare enterprise" can only be achieved using existing and emerging medical informatics standards like Digital Imaging and Communications in Medicine (DICOM®1), Health Level Seven (HL7®), and Systematized Nomenclature of Medicine-Clinical Terms (SNOMED CT®), following the recommendations of Integrating the Healthcare Enterprise (IHE®). The consequences of the full digitalization of pathology departments are hard to foresee, but short term issues have arisen that imply interesting challenges for health care standards bodies.

  13. Electric road vehicles. Technology, state of the art, applications. Elektrische Strassenfahrzeuge. Technik, Entwicklungsstand und Einsatzbereiche

    Energy Technology Data Exchange (ETDEWEB)

    Naunin, D [Technische Univ. Berlin (Germany, F.R.). Inst. fuer Elektronik; Bader, C [Daimler-Benz AG, Stuttgart (Germany, F.R.); Driehorst, F A; Kalberlah, A [Volkswagenwerk AG, Wolfsburg (Germany, F.R.); Fischer, W [Asea Brown Boveri AG, Heidelberg (Germany, F.R.); Kiehne, H A [Zweckverband Elektrotechnik- und Elektronikindustrie e.V. (ZVEI), Hannover (Germany, F.R.). Fachverband Batter

    1989-01-01

    The book discusses (1) economic and traffic policy aspects; (2) new battery systems; (3) different motor concepts; (4) possibilities and problems of serial production; (5) present applications in spas and chances for future applications. The latest state of the art and of the current discussion are presented. (orig./HP) With 139 figs.

  14. CEN standards for solar thermal systems - State of the art and expectted impact

    NARCIS (Netherlands)

    Ree, B.G.C. van der; Pauschinger, Th.

    1996-01-01

    Since 1994, the European Committee for Standardization (CEN) Technical Committee TC 312 has been active in producing European Standards for thermal solar energy systems and components. In this paper, an overview of the present State of the Art of the draft standards is presented. These standards

  15. State of the art-hydraulic yaw systems for wind turbines

    DEFF Research Database (Denmark)

    Stubkier, Søren; Pedersen, Henrik C.; Andersen, Torben Ole

    2011-01-01

    This paper addresses the yawing systems of Horizontal Axis Wind Turbines (HAWT’s). HAWT’s represents close to all of the commercial large wind turbines sold today and must be considered state-of-the art within wind turbine technology. Two choices exists when considering components for the active ...

  16. Laser Beam Machining (LBM), State of the Art and New Opportunities

    NARCIS (Netherlands)

    Meijer, J.

    2004-01-01

    An overview is given of the state of the art of laser beam machining in general with special emphasis on applications of short and ultrashort lasers. In laser welding the trend is to apply optical sensors for process control. Laser surface treatment is mostly used to apply corrosion and wear

  17. Interaction between rhinitis and asthma: state of the art.

    Science.gov (United States)

    Frieri, Marianne

    2003-01-01

    Rhinitis and asthma are very prevalent allergic disorders with comorbid features, similar risk factors, and environmental triggers. Pathophysiological processes are linked via tissue histopathology, immunologic pathway, and inflammatory mediators. Allergen challenge of the upper airway can increase lower-airway responsiveness and allergen challenge of the lower airway can lead to upper-airway inflammation. Both allergic rhinitis and asthma exert a high social and economic burden in significant loss of work and school days as well as impairment for children and adults.

  18. [School meals: state of the art and recommendations].

    Science.gov (United States)

    Aranceta Bartrina, J; Pérez Rodrigo, C; Dalmau Serra, J; Gil Hernández, A; Lama More, R; Martín Mateos, M A; Martínez Suárez, V; Pavón Belinchón, P; Suárez Cortina, L

    2008-07-01

    School meals contribute substantially to overall energy and nutrient intake adequacy of children, but also play an important role in the development of child food habits and the socialisation process. Evidence shows that school based environmental actions, which include changes in school meals and school food policies related to increased availability and access to healthy foods and drinks while in the school are effective to foster healthy eating practices among children. A growing number of children engage in school meals. Available information to date shows that the quality of the food on offer is not always consistent with dietary guidelines. Vegetables and fish are served less often than desirable and excess added fats are used in food preparations. Norms and regulations are very detailed regarding food safety issues and administrative management of the service, including subcontracting of catering providers and care staff. Nutrition and health promotion issues should also be included in regulations by means of nutrition recommendations for school meals along with information on food based dietary guidelines and portion sizes. School meals should be part of the educational project using a whole school approach.

  19. State of the Art in Tracking Based Business

    NARCIS (Netherlands)

    Kajosaari, R.; Langius, E.; Holmström, J.

    2007-01-01

    Item-centric control and information management is a potential solution to establish economically and practically feasible Concurrent Enterprises. The economical feasibility of item-centric tracking is based on recent technological developments for monitoring the material flow on the item-level

  20. Wireless sensor networks: state of the art and future perspective

    NARCIS (Netherlands)

    Tuyl, van B.A.J.; Os, van E.A.; Henten, van E.J.

    2008-01-01

    To reduce labour costs, the responsibilities of greenhouse production managers are ever increasing. This makes the decision-making process more complex and more information from the greenhouse work floor is needed. There is a tendency towards monitoring and managing crop production at plant level