Economic development and workforce impacts of state DOT highway expenditures.

Science.gov (United States)

2014-01-01

The research measured the impact of Georgia Department of Transportations highway : expenditures on economic activity in the State. The analysis covered awards made between January 2009 : and April 2013. The research is unique in that it not only ...

Regulated and unregulated emissions from modern 2010 emissions-compliant heavy-duty on-highway diesel engines.

Science.gov (United States)

Khalek, Imad A; Blanks, Matthew G; Merritt, Patrick M; Zielinska, Barbara

2015-08-01

The U.S. Environmental Protection Agency (EPA) established strict regulations for highway diesel engine exhaust emissions of particulate matter (PM) and nitrogen oxides (NOx) to aid in meeting the National Ambient Air Quality Standards. The emission standards were phased in with stringent standards for 2007 model year (MY) heavy-duty engines (HDEs), and even more stringent NOX standards for 2010 and later model years. The Health Effects Institute, in cooperation with the Coordinating Research Council, funded by government and the private sector, designed and conducted a research program, the Advanced Collaborative Emission Study (ACES), with multiple objectives, including detailed characterization of the emissions from both 2007- and 2010-compliant engines. The results from emission testing of 2007-compliant engines have already been reported in a previous publication. This paper reports the emissions testing results for three heavy-duty 2010-compliant engines intended for on-highway use. These engines were equipped with an exhaust diesel oxidation catalyst (DOC), high-efficiency catalyzed diesel particle filter (DPF), urea-based selective catalytic reduction catalyst (SCR), and ammonia slip catalyst (AMOX), and were fueled with ultra-low-sulfur diesel fuel (~6.5 ppm sulfur). Average regulated and unregulated emissions of more than 780 chemical species were characterized in engine exhaust under transient engine operation using the Federal Test Procedure cycle and a 16-hr duty cycle representing a wide dynamic range of real-world engine operation. The 2010 engines' regulated emissions of PM, NOX, nonmethane hydrocarbons, and carbon monoxide were all well below the EPA 2010 emission standards. Moreover, the unregulated emissions of polycyclic aromatic hydrocarbons (PAHs), nitroPAHs, hopanes and steranes, alcohols and organic acids, alkanes, carbonyls, dioxins and furans, inorganic ions, metals and elements, elemental carbon, and particle number were substantially (90

Test/QA plan for the verification testing of selective catalytic reduction control technologies for highway, nonroad use heavy-duty diesel engines

Science.gov (United States)

This ETV test/QA plan for heavy-duty diesel engine testing at the Southwest Research Institute’s Department of Emissions Research (DER) describes how the Federal Test Procedure (FTP), as listed in 40 CFR Part 86 for highway engines and 40 CFR Part 89 for nonroad engines, will be ...

Trends in federal and state highway investment

Science.gov (United States)

2003-06-18

In response to Congressional request the U.S. General Accounting Office (GAO) reviewed data from Federal Highway Administration 's Highway Statistics for the period from 1982 through 2001, adjusting expenditures to 2001 dollars to (1) identify overal...

78 FR 23630 - Notice of Final Federal Agency Actions on State Highway 99 (Segment C) in Texas

Science.gov (United States)

2013-04-19

... INFORMATION CONTACT: Mr. Gregory Punske, P.E., District Engineer, District B (South), Federal Highway...)]; Archeological and Historic Preservation Act [16 U.S.C. 469-469(c)]. 6. Social and Economic: Civil Rights Act of... Engineer. [FR Doc. 2013-08853 Filed 4-18-13; 8:45 am] BILLING CODE 4910-RY-P ...

Decision of National and Provincial Highway Asphalt Pavement Structure Based on Value Engineering

Directory of Open Access Journals (Sweden)

Yingwei Ren

2014-01-01

Full Text Available It is important that decision of asphalt pavement structure requires overall considerations of the performance and financial investment. To have asphalt pavement structure fulfilling good reliability, the asphalt pavement structure decision was researched based on value engineering theory. According to the national and provincial highway investigation data in Shandong Province during the last decade, the asphalt pavement performance attenuation rules of traffic levels and asphalt layer thicknesses were developed, and then the road performance evaluation method was presented. In addition, the initial investments, the costs of road maintenance, and middle-scale repair in a period were analyzed. For the light traffic and medium traffic example, using the value engineering method, the pavement performance and costs of which thickness varies from 6 cm to 10 cm were calculated and compared. It was concluded that value engineering was an effective method in deciding the asphalt pavement structure.

State highways as main streets : a study of community design and visioning.

Science.gov (United States)

2009-10-01

The objectives for this project were to explore community transportation design policy to improve collaboration when state highways serve as local main streets, determine successful approaches to meet the federal requirements for visioning set forth ...

Service life assessment of timber highway bridges in USA climate zones

Science.gov (United States)

James P. Wacker; Brian K. Brashaw; Thomas G. Williamson; P. David Jones; Matthew S. Smith; Travis K. Hosteng; David L. Strahl; Lola E. Coombe; V.J. Gopu

2014-01-01

As engineers begin to estimate life-cycle costs and sustainable design approaches for timber bridges, there is a need for more reliable data about their durability and expected service life. This paper summarizes a comprehensive effort to assess the current condition of more than one hundred timber highway bridge superstructures throughout the United States. This...

78 FR 4985 - Uniform Procedures for State Highway Safety Grant Programs

Science.gov (United States)

2013-01-23

...) that were tied to the agency's child restraint performance standards (FMVSS 213). Thus, under today's... consolidates into one rule a number of old regulations (State Highway Safety Agency, Political Subdivision... Belt Performance Grants (formerly codified at 23 U.S.C. 406) and Child Safety and Child Booster Seat...

Alternative routes for highway shipments of radioactive materials and lessons learned from state designations

International Nuclear Information System (INIS)

1990-07-01

Pursuant to the Hazardous Materials Transportation Act (HMTA), the Department of Transportation (DOT) has promulgated a comprehensive set of regulations regarding the highway transportation of high-level radioactive materials. These regulations, under docket numbers HM-164 and HM-164A, establish interstate highways as the preferred routes for the transportation of radioactive materials within and through the states. The regulations also provide a methodology by which a state may select altemative routes. First, the state must establish a ''state routing agency'', defined as an entity authorized to use the state legal process to impose routing requirements on carriers of radioactive material (49 CFR 171.8). Once identified, the state routing agency must select routes in accordance with DOTs Guidelines for Selecting Preferred Highway Routes for Large Quantity Shipments of Radioactive Materials or an equivalent routing analysis. Adjoining states and localities should be consulted on the impact of proposed alternative routes as a prerequisite of final route selection. Lastly, the states must provide written notice to DOT of any alternative route designation before the routes are deemed effective. The purpose of this report is to discuss the ''lessons learned'' by the five states within the southern region that have designated alternative or preferred routes under the regulations of the Department of Transportation (DOT) established for the transportation of radioactive materials. The document was prepared by reviewing applicable federal laws and regulations, examining state reports and documents and contacting state officials and routing agencies involved in making routing decisions. In undertaking this project, the Southern States Energy Board hopes to reveal the process used by states that have designated alternative routes and thereby share their experiences (i.e., lessons learned) with other southern states that have yet to make designations

75 FR 65706 - Notice of Final Federal Agency Actions on Proposed Highway in Washington State

Science.gov (United States)

2010-10-26

... actions taken by the FHWA and other Federal agencies that are final within the meaning of 23 U.S.C. 139(l... notice, the FHWA is advising the public of final agency actions subject to 23 U.S.C. 139(l)(1). A claim... still applies. FOR FURTHER INFORMATION CONTACT: For FHWA: Ms. Liana Liu, Area Engineer, Federal Highway...

Comprehensive highway corridor planning with sustainability indicators.

Science.gov (United States)

2011-10-01

"The Maryland State Highway Administration (SHA) has initiated major planning efforts to improve transportation : efficiency, safety, and sustainability on critical highway corridors through its Comprehensive Highway Corridor : (CHC) program. This pr...

Off-highway vehicle technology roadmap.; TOPICAL

International Nuclear Information System (INIS)

NONE

2002-01-01

The off-highway sector is under increasing pressure to reduce operating costs (including fuel costs) and to reduce emissions. Recognizing this, the Society of Automotive Engineers and the U.S. Department of Energy (DOE) convened a workshop in April 2001 (ANL 2001) to (1) determine the interest of the off-highway sector (consisting of agriculture, construction, surface mining, inland marine) in crafting a shared vision of off-highway, heavy machines of the future and (2) identify critical research and development (R and D) needs for minimizing off-highway vehicle emissions while cost-effectively maintaining or enhancing system performance. The workshop also enabled government and industry participants to exchange information. During the workshop, it became clear that the challenges facing the heavy, surface-based off-highway sector can be addressed in three major machine categories: (1) engine/aftertreatment and fuels/lubes, (2) machine systems, and (3) thermal management. Working groups convened to address these topical areas. The status of off-highway technologies was determined, critical technical barriers to achieving future emission standards were identified, and strategies and technologies for reducing fuel consumption were discussed. Priority areas for R and D were identified. Given the apparent success of the discussions at the workshop, several participants from industry agreed to help in the formation of a joint industry/government ''roadmap'' team. The U.S. Department of Energy's Office of Heavy Vehicle Technologies has an extensive role in researching ways to make heavy-duty trucks and trains more efficient, with respect to both fuel usage and air emissions. The workshop participants felt that a joint industry/government research program that addresses the unique needs of the off-highway sector would complement the current research program for highway vehicles. With industry expertise, in-kind contributions, and federal government funding (coupled with

Technical Support Document: The Development of the Advanced Energy Design Guide for Highway Lodging Buildings

Energy Technology Data Exchange (ETDEWEB)

Jiang, Wei; Jarnagin, Ronald E.; Gowri, Krishnan; McBride, M.; Liu, Bing

2008-09-30

This Technical Support Document (TSD) describes the process and methodology for development of the Advanced Energy Design Guide for Highway Lodgings (AEDG-HL or the Guide), a design guidance document intended to provide recommendations for achieving 30% energy savings in highway lodging properties over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The AEDG-HL is the fifth in a series of guides being developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the United States Green Buildings Council (USGBC), and the U.S. Department of Energy (DOE).

A STUDY OF THE DISCREPANCY BETWEEN FEDERAL AND STATE MEASUREMENTS OF ON-HIGHWAY FUEL CONSUMPTION

Energy Technology Data Exchange (ETDEWEB)

Hwang, HL

2003-08-11

Annual highway fuel taxes are collected by the Treasury Department and placed in the Highway Trust Fund (HTF). There is, however, no direct connection between the taxes collected by the Treasury Department and the gallons of on-highway fuel use, which can lead to a discrepancy between these totals. This study was conducted to determine how much of a discrepancy exists between the total fuel usages estimated based on highway revenue funds as reported by the Treasury Department and the total fuel usages used in the apportionment of the HTF to the States. The analysis was conducted using data from Highway Statistics Tables MF-27 and FE-9 for the years 1991-2001. It was found that the overall discrepancy is relatively small, mostly within 5% difference. The amount of the discrepancy varies from year to year and varies among the three fuel types (gasoline, gasohol, special fuels). Several potential explanations for these discrepancies were identified, including issues on data, tax measurement, gallon measurement, HTF receipts, and timing. Data anomalies caused by outside forces, such as deferment of tax payments from one fiscal year to the next, can skew fuel tax data. Fuel tax evasion can lead to differences between actual fuel use and fuel taxes collected. Furthermore, differences in data collection and reporting among States can impact fuel use data. Refunds, credits, and transfers from the HTF can impact the total fuel tax receipt data. Timing issues, such as calendar year vs. fiscal year, can also cause some discrepancy between the two data sources.

Highway Safety Program Manual: Volume 3: Motorcycle Safety.

Science.gov (United States)

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 3 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on aspects of motorcycle safety. The purpose and specific objectives of a State motorcycle safety program are outlined. Federal authority in the highway safety area and general policies…

23 CFR 645.109 - Preliminary engineering.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Preliminary engineering. 645.109 Section 645.109 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS UTILITIES Utility Relocations, Adjustments, and Reimbursement § 645.109 Preliminary engineering. (a) As...

Ferguson rock slide buries California State Highway near Yosemite National Park

Science.gov (United States)

Harp, Edwin L.; Reid, Mark E.; Godt, Jonathan W.; DeGraff, Jerome V.; Gallegos, Alan J.

2008-01-01

During spring 2006, talus from the toe area of a rock-block slide of about 800,000 m3 buried California State Highway 140, one of the main routes into heavily-visited Yosemite National Park, USA. Closure of the highway for 92 days caused business losses of about 4.8 million USD. The rock slide, composed of slate and phyllite, moved slowly downslope from April to June 2006, creating a fresh head scarp with 9-12 m of displacement. Movement of the main rock slide, a re-activation of an older slide, was triggered by an exceptionally wet spring 2006, following a very wet spring 2005. As of autumn 2006, most of the main slide appeared to be at rest, although rocks occasionally continued to fall from steep, fractured rock masses at the toe area of the slide. Future behavior of the slide is difficult to predict, but possible scenarios range from continued scattered rock fall to complete rapid failure of the entire mass. Although unlikely except under very destabilizing circumstances, a worst-case, rapid failure of the entire rock slide could extend across the Merced River, damming the river and creating a reservoir. As a temporary measure, traffic has been rerouted to the opposite side of the Merced River at about the same elevation as the buried section of Highway 140. A state-of-the-art monitoring system has been installed to detect movement in the steep talus slope, movement of the main slide mass, local strong ground motion from regional earthquakes, and sudden changes in stream levels, possibly indicating damming of the river by slide material.

Major Highway Lines, US, 2015, NAVTEQ

Data.gov (United States)

U.S. Environmental Protection Agency — NAVTEQ Major Highways for the United States. The Major Highways layer contains Road Network features based on the Functional Class attribute value on each link...

Secondary Highway Lines, US, 2015, NAVTEQ

Data.gov (United States)

U.S. Environmental Protection Agency — NAVTEQ Secondary Highways for the United States. The Secondary Highways layer contains Road Network features based on the Functional Class value on each link present...

Vertebrate roadkills on State Highway 383, Rondônia, Brazil.

Directory of Open Access Journals (Sweden)

Luiz Carlos Batista Turci

2009-03-01

Full Text Available Roadkills are a serious threat to many species of wildlife worldwide. In Brazil, few studies are available about the importance of roadkills. Information about roadkills in Amazonia are even more scarce when compared to central and southern Brazil. Here we describe the vertebrate roadkills on State Highway 383 in Rondônia. From May 2004 – April 2005, thirty samples were taken the along 110km of the highway between Cacoal and Alta Floresta D’Oeste. Thirty-four vertebrate species were found in 259 specimens. In terms of absolute numbers, amphibians were the most frequent roadkills, with 68 individuals of two species. Birds followed, with 67 individuals of 12 species, then reptiles (67 indiv., 12 species and mammals (63 indiv.,13 species. Eight species (Leptodactylus gr. pentadactylus, Rhinella sp, Amphisbaena sp., Liophis reginae, Crotophaga ani, Didelphis marsupialis, Euphractus sexcinctus and Cerdocyon thous were the most frequent roadkills, accounting for 76% of the vertebrate roadkills. More than half of the roadkills occurred during the dry season.

Comprehensive highway corridor planning with sustainability indicators : [research summary].

Science.gov (United States)

2013-04-01

The Maryland State Highway Administration (SHA) has initiated major planning : efforts to improve transportation efficiency, safety and sustainability on critical : highway corridors through its Comprehensive Highway Corridor (CHC) program. : It is i...

FLOW PATTERNS OF VEHICULAR TRAFFIC ALONG HIGHWAY TOLL PLAZA IN OGUN STATE

Directory of Open Access Journals (Sweden)

Bashiru A. Raji

2009-06-01

Full Text Available Congestion on our highways, freeways and arterials are increasing at an alarming rate. This occurs because there is an increase in vehicular growth without a corresponding increase in road size, and this has made free flow of traffic a preponderant problem in our highways. Toll plaza causes delay on our highways and results are formation of queue. This paper examined how simple queuing model can be used to determine traffic intensity and the flow pattern of car traffic at a toll plaza. The study was carried out with twelve field assistants at Ogere toll plaza in Ogun State. Findings show a significant variation in the degree of hourly traffic intensities at the four pay points for cars at the toll plaza. However, variation in the daily traffic intensities at the four pay points for cars showed no significant variation. The study also revealed that bumps constructed to check vehicles speed, hawker’s trading activities are among other factors that constitute hindrance to free flow of traffic other than service time and inter-arrival time of cars at the toll plaza. It is therefore recommended that appropriate authority should look into these factors and take necessary steps towards ensuring free flow of traffic at the plaza.

HIGHWAY, a transportation routing model: program description and users' manual

International Nuclear Information System (INIS)

Joy, D.S.; Johnson, P.E.; Gibson, S.M.

1982-12-01

A computerized transportation routing model has been developed at the Oak Ridge National Laboratory to be used for predicting likely routes for shipping radioactive materials. The HIGHWAY data base is a computerized road atlas containing descriptions of the entire interstate highway system, the federal highway system, and most of the principal state roads. In addition to its prediction of the most likely commercial route, options incorporated in the HIGHWAY model can allow for maximum use of interstate highways or routes that will bypass urbanized areas containing populations > 100,000. The user may also interactively modify the data base to predict routes that bypass any particular state, city, town, or specific highway segment

Bayou Corne sinkhole : control measurements of State Highway 70 in Assumption Parish, Louisiana, tech summary.

Science.gov (United States)

2014-01-01

The sinkhole located in Assumption Parish, Louisiana, threatens the stability of Highway 70, a state maintained route. In order to : mitigate the potential damaging e ects of the sinkhole on this infrastructure, the Louisiana Department of Transpo...

Green Performance Contracting Strategy for Highway Construction Projects

OpenAIRE

2014-01-01

With the growing awareness of sustainability and global climate change, state highway agencies are taking essential steps to reduce carbon emissions from highway infrastructure on a life cycle basis. While much is known regarding climate change mitigation and adaption strategies during highway operation, very little is understood about how climate change issues should be integrated into highway planning, delivery, and construction processes. This paper presents the current contracting pra...

Test/QA plan for the verification testing of alternative or reformulated liquid fuels, fuel additives, fuel emulsions, and lubricants for highway and nonroad use heavy-duty diesel engines

Science.gov (United States)

This Environmental Technology Verification Program test/QA plan for heavy-duty diesel engine testing at the Southwest Research Institute’s Department of Emissions Research describes how the Federal Test Procedure (FTP), as listed in 40 CFR Part 86 for highway engines and 40 CFR P...

Assessment of highway pavements using GPR

Science.gov (United States)

Plati, Christina; Loizos, Andreas

2015-04-01

Highway infrastructure is a prerequisite for a functioning economy and social life. Highways, often prone to congestion and disruption, are one of the aspects of a modern transport network that require maximum efficiency if an integrated transport network, and sustainable mobility, is to be achieved. Assessing the condition of highway structures, to plan subsequent maintenance, is essential to allow the long-term functioning of a road network. Optimizing the methods used for such assessment will lead to better information being obtained about the road and underlying ground conditions. The condition of highway structures will be affected by a number of factors, including the properties of the highway pavement, the supporting sub-base and the subgrade (natural ground), and the ability to obtain good information about the entire road structure, from pavement to subgrade, allows appropriate maintenance programs to be planned. The maintenance of highway pavements causes considerable cost and in many cases obstruction to traffic flow. In this situation, methods that provide information on the present condition of pavement structure non-destructively and economically are of great interest. It has been shown that Ground-Penetrating-Radar (GPR), which is a Non Destructive Technique (NDT), can deliver information that is useful for the planning of pavement maintenance activities. More specifically GPR is used by pavement engineers in order to determine physical properties and characteristics of the pavement structure, information that is valuable for the assessment of pavement condition. This work gives an overview on the practical application of GPR using examples from highway asphalt pavements monitoring. The presented individual applications of GPR pavement diagnostics concern structure homogeneity, thickness of pavement layers, dielectric properties of asphalt materials etc. It is worthwhile mentioning that a number of applications are standard procedures, either

SafetyAnalyst : software tools for safety management of specific highway sites

Science.gov (United States)

2010-07-01

SafetyAnalyst provides a set of software tools for use by state and local highway agencies for highway safety management. SafetyAnalyst can be used by highway agencies to improve their programming of site-specific highway safety improvements. SafetyA...

Examining engineering costs for development of highway projects.

Science.gov (United States)

2012-12-01

The Texas Department of Transportation (TxDOT) commissioned a research team at Texas State University-San Marcos Department of Accounting to analyze the cost of projects by determining the cost of a preliminary engineering hour necessary to develop h...

Bayou Corne Sinkhole: Control Measurements of State Highway 70 in Assumption Parish, Louisiana : Research Project Capsule

Science.gov (United States)

2012-09-01

The sinkhole located in northern Assumption Parish, Louisiana, threatens : the stability of Highway 70, a state-maintained route. In order to monitor : and mitigate potential damage eff ects on this infrastructure, the Louisiana : Department of Trans...

Technical Specifications of Structural Health Monitoring for Highway Bridges: New Chinese Structural Health Monitoring Code

Directory of Open Access Journals (Sweden)

Fernando Moreu

2018-03-01

Full Text Available Governments and professional groups related to civil engineering write and publish standards and codes to protect the safety of critical infrastructure. In recent decades, countries have developed codes and standards for structural health monitoring (SHM. During this same period, rapid growth in the Chinese economy has led to massive development of civil engineering infrastructure design and construction projects. In 2016, the Ministry of Transportation of the People’s Republic of China published a new design code for SHM systems for large highway bridges. This document is the first technical SHM code by a national government that enforces sensor installation on highway bridges. This paper summarizes the existing international technical SHM codes for various countries and compares them with the new SHM code required by the Chinese Ministry of Transportation. This paper outlines the contents of the new Chinese SHM code and explains its relevance for the safety and management of large bridges in China, introducing key definitions of the Chinese–United States SHM vocabulary and their technical significance. Finally, this paper discusses the implications for the design and implementation of a future SHM codes, with suggestions for similar efforts in United States and other countries.

Dollars for lives: the effect of highway capital investments on traffic fatalities.

Science.gov (United States)

Nguyen-Hoang, Phuong; Yeung, Ryan

2014-12-01

This study examines the effect of highway capital investments on highway fatalities. We used state-level data from the 48 contiguous states in the United States from 1968 through 2010 to estimate the effects on highway fatalities of capital expenditures and highway capital stock. We estimated these effects by controlling for a set of control variables together with state and year dummy variables and state-specific linear time trends. We found that capital expenditures and capital stock had significant and negative effects on highway fatalities. States faced with declines in gas tax revenues have already cut back drastically on spending on roads including on maintenance and capital outlay. If this trend continues, it may undermine traffic safety. While states and local governments are currently fiscally strained, it is important for them to continue investments in roadways to enhance traffic safety and, more significantly, to save lives. Copyright © 2014 National Safety Council and Elsevier Ltd. All rights reserved.

Intelligent Lane Reservation System for Highway(s)

OpenAIRE

Dobre, Ciprian

2012-01-01

Highways tend to get congested because of the increase in the number of cars travelling on them. There are two solutions to this. The first one, which is also expensive, consists in building new highways to support the traffic. A much cheaper alternative consists in the introduction of advanced intelligent traffic control systems to manage traffic and increase the efficiency of the already existing highways. Intelligent lane reservation system for highways (ILRSH) is such a software control s...

HIGHWAY, a transportation routing model: program description and revised users' manual

International Nuclear Information System (INIS)

Joy, D.S.; Johnson, P.E.

1983-10-01

A computerized transportation routing model has been developed at the Oak Ridge National Laboratory to be used for predicting likely routes for shipping radioactive materials. The HIGHWAY data base is a computerized road atlas containing descriptions of the entire Interstate System, the federal highway system, and most of the principal state roads. In addition to its prediction of the most likely commercial route, options incorporated in the HIGHWAY model can allow for maximum use of Interstate highways or routes that will bypass urbanized areas containing populations greater than 100,000 persons. The user may also interactively modify the data base to predict routes that bypass any particular state, city, town, or specific highway segment

Accelerated bridge construction utilizing precast pier caps on state highway 69 over Turkey Creek, Huerfano County, CO.

Science.gov (United States)

2014-07-01

The purpose of this report is to document Accelerated Bridge Construction (ABC) techniques on IBRD : (Innovative Bridge Research and Development) project 102470 for the construction of Bridge N-16-Q : on State Highway 69 over Turkey Creek. The constr...

Feasibility of shoulder use for highway work zone optimization

Directory of Open Access Journals (Sweden)

Bo Du

2014-08-01

Full Text Available Highway maintenance, often requiring lane closure, is very expensive in terms of the costs associated with transportation agencies (i. e. work zone setups and road users (i. e. delay. Longer work zones tend to increase the user delay but will be efficient because of fewer repeated setups. To increase road capacity and mitigate congestion impact for a short-term work zone, temporary shoulder use may be applied. This study develops an analytical model to optimize work zone length on a multi-lane highway considering time-varying traffic volume and road capacity affected by light condition, heavy vehicle percentage, and lane width. The results can be used to evaluate the work zone impact (i. e. delay and cost and assist engineers/planners to prepare and develop a cost-effective highway maintenance plan. A case study for a highway work zone in New Jersey has been conducted, in which the optimized solution is found. A guideline of using road shoulder under various circumstances is developed.

Assessing the potential to sequester carbon within state highway rights-of-way in New Mexico phase 2: development of a right-of-way carbon sequestration program.

Science.gov (United States)

2016-06-13

The New Mexico Department of Transportation (NMDOT) was selected by the Federal Highway : Administration (FHWA) to determine the feasibility of maximizing carbon sequestration within state : highway rightsofway (ROW). Golder Associates Inc. was...

Initial testing of a variable-stroke Stirling engine

Science.gov (United States)

Thieme, L. G.

1985-01-01

In support of the U.S. Department of Energy's Stirling Engine Highway Vehicle Systems Program, NASA Lewis Research Center is evaluating variable-stroke control for Stirling engines. The engine being tested is the Advenco Stirling engine; this engine was manufactured by Philips Research Laboratories of the Netherlands and uses a variable-angle swash-plate drive to achieve variable stroke operation. The engine is described, initial steady-state test data taken at Lewis are presented, a major drive system failure and subsequent modifications are described. Computer simulation results are presented to show potential part-load efficiency gains with variable-stroke control.

Effect of highways and local activities on the quality of underground water in Ogun State, Nigeria: a case study of three districts in Ogun State, Nigeria.

Science.gov (United States)

Odukoya, Olusegun O; Onianwa, Percy C; Sanusi, Olanrewaju I

2010-09-01

The effect of highways and local activities on the quality of groundwater in Ogun State, Nigeria was investigated. This was done by collecting groundwater samples from three different districts in the state, located in Southwestern Nigeria. The water samples collected at 5 m from the highway and control samples collected at 3 km from the highway were analyzed for the following physicochemical parameters: pH, conductivity, chemical oxygen demand, alkalinity, total hardness, total solid, suspended solid, dissolved solid, chloride, sulfate, phosphate, nitrate, phenol, and the metals-lead, zinc, iron, aluminum, sodium, and potassium. The levels of chromium, copper, and cadmium in the samples were below the detectable limit. The levels of the parameters show that there are significant differences between those in the samples and the controls (F test) except for phosphate and phenol. Also, anthropogenic sources (local activities) elevate the levels of different specific parameters, which are related to these activities. Good correlation was observed between traffic density and lead levels as well as between conductivity and dissolved solids. Comparisons with the World Health Organization guidelines indicate that most of the water samples are not suitable for human consumption.

Dollars for lives : the effect of highway capital investments on traffic fatalities.

Science.gov (United States)

2014-10-01

There is no research that links capital investments on highways with highway fatalities. Our research project aimed to fill : t : hat gap. We used state : - : level data from the 48 contiguous states of the U.S. from 1968 through 2010 to estimate the...

Solid-state laser engineering

CERN Document Server

Koechner, Walter

1999-01-01

Solid-State Laser Engineering, written from an industrial perspective, discusses in detail the characteristics, design, construction, and performance of solid-state lasers. Emphasis is placed on engineering and practical considerations; phenomenological aspects using models are preferred to abstract mathematical derivations. This new edition has extensively been updated to account for recent developments in the areas of diode-laser pumping, laser materials, and nonlinear crystals. Walter Koechner received a doctorate in Electrical Engineering from the University of Technology in Vienna, Austria, in 1965. He has published numerous papers in the fields of solid-state physics, optics, and lasers. Dr. Koechner is founder and president of Fibertek, Inc., a research firm specializing in the design, development, and production of advanced solid-state lasers, optical radars, and remote-sensing systems.

Downwind evolution of the volatility and mixing state of near-road aerosols near a US interstate highway

Science.gov (United States)

Saha, Provat K.; Khlystov, Andrey; Grieshop, Andrew P.

2018-02-01

We present spatial measurements of particle volatility and mixing state at a site near a North Carolina interstate highway (I-40) applying several heating (thermodenuder; TD) experimental approaches. Measurements were conducted in summer 2015 and winter 2016 in a roadside trailer (10 m from road edge) and during downwind transects at different distances from the highway under favorable wind conditions using a mobile platform. Results show that the relative abundance of semi-volatile species (SVOCs) in ultrafine particles decreases with downwind distance, which is consistent with the dilution and mixing of traffic-sourced particles with background air and evaporation of semi-volatile species during downwind transport. An evaporation kinetics model was used to derive particle volatility distributions by fitting TD data. While the TD-derived distribution apportions about 20-30 % of particle mass as semi-volatile (SVOCs; effective saturation concentration, C∗ ≥ 1µm-3) at 10 m from the road edge, approximately 10 % of particle mass is attributed to SVOCs at 220 m, showing that the particle-phase semi-volatile fraction decreases with downwind distance. The relative abundance of semi-volatile material in the particle phase increased during winter. Downwind spatial gradients of the less volatile particle fraction (that remaining after heating at 180 °C) were strongly correlated with black carbon (BC). BC size distribution and mixing state measured using a single-particle soot photometer (SP2) at the roadside trailer showed that a large fraction (70-80 %) of BC particles were externally mixed. Heating experiments with a volatility tandem differential mobility analyzer (V-TDMA) also showed that the nonvolatile fraction in roadside aerosols is mostly externally mixed. V-TDMA measurements at different distances downwind from the highway indicate that the mixing state of roadside aerosols does not change significantly (e.g., BC mostly remains externally mixed) within a

Geodetic Networks, This is udated by the use of GPS and updated weekely. It consist of interstate highways, state highways, major roads and local roads as well as private streets with address range, speed limit and elevation data associated to each segement., Published in 2007, Johnson County Government.

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — Geodetic Networks dataset current as of 2007. This is udated by the use of GPS and updated weekely. It consist of interstate highways, state highways, major roads...

Solid-state laser engineering

CERN Document Server

Koechner, Walter

1996-01-01

Solid-State Laser Engineering, written from an industrial perspective, discusses in detail the characteristics, design, construction, and performance of solid-state lasers. Emphasis is placed on engineering and practical considerations; phenomenological aspects using models are preferred to abstract mathematical derivations. This new edition has extensively been updated to account for recent developments in the areas of diode-laser pumping, mode locking, ultrashort-pulse generation etc. Walter Koechner received a doctorate in Electrical Engineering from the University of Technology in Vienna, Austria, in 1965. He has published numerous papers in the fields of solid-state physics, optics, and lasers. Dr. Koechner is founder and president of Fibertek, Inc., a research firm specializing in the design, development, and production of advanced solid-state lasers, optical radars, and remote-sensing systems.

Evaluation of seismic damage to bridges and highway systems in Shelby County, Tennessee

Science.gov (United States)

Jernigan, John Bailey

Past earthquakes have demonstrated that bridges are one of the most vulnerable components of highway transportation systems. In addition to bridges, roadways may also be subject to damage, particularly in an area prone to earthquake-induced liquefaction. As a consequence, the highway transportation systems after an earthquake might be impaired and the post-earthquake emergency response might be compromised. Furthermore, the impact on the regional economy might be very significant from the damage to highway systems. Since highway transportation systems are critical lifelines for people living in an urban area, it is important to evaluate the vulnerability of bridges and highway systems in earthquake-prone regions. Memphis and Shelby County, Tennessee are located close to the southwestern segment of the New Madrid seismic zone (NMSZ). This zone produced three of the largest earthquakes in North America in 1811--1812. Presently, the NMSZ is still active and is considered by engineers, seismologists, and public officials as the most hazardous seismic zone in the central and eastern United States. Bridges in the Memphis area were generally not designed for seismic resistance until 1990. Therefore, the majority of existing bridges might suffer damage from earthquakes occurring in the NMSZ. The overall objective of this study is to evaluate the expected damage to bridges and roadways on the major routes in Memphis and Shelby County resulting from New Madrid earthquakes with the aid of geographic information system (GIS) technology. The road network selected for this study includes all the Interstate highway system, all the primary and secondary routes maintained by the state, and most of the major arterial routes. There are 452 bridges on the selected roadway systems and data pertinent to these bridges and roadway systems were collected and implemented as a GIS database. The bridges in the Memphis area were classified into several types and damage states were determined

Proceedings of the Meeting of the Coastal Engineering Research Board (54th) Held in New Orleans, Louisiana on 4-6 June 1991

Science.gov (United States)

1992-04-01

Sanda, CECW-EG SOUTH PACIFIC DIVISION Mr. Jaime R. Merino, CESPD-ED-W BOARD OF ENGINEERS FOR RIVERS Mr. Jeffrey C. Cole, CESPN-PE-W AND HARBORS Mr...areas. 68 Coastal areas experiencing erosion and economic loss include: a. Sabine Pass to Rollover Pass/Highway 87. In the fall of 1989, the State... Sabine Pass. The closure was prompted by the dangerous conditions resulting from erosion along the highway. In some areas, the highway lies at the

Module 13: Bulk Packaging Shipments by Highway

International Nuclear Information System (INIS)

Przybylski, J.L.

1994-07-01

The Hazardous Materials Modular Training Program provides participating United States Department of Energy (DOE) sites with a basic, yet comprehensive, hazardous materials transportation training program for use onsite. This program may be used to assist individual program entities to satisfy the general awareness, safety training, and function specific training requirements addressed in Code of Federal Regulation (CFR), Title 49, Part 172, Subpart H -- ''Training.'' Module 13 -- Bulk Packaging Shipments by Highway is a supplement to the Basic Hazardous Materials Workshop. Module 13 -- Bulk Packaging Shipments by Highway focuses on bulk shipments of hazardous materials by highway mode, which have additional or unique requirements beyond those addressed in the ten module core program. Attendance in this course of instruction should be limited to those individuals with work experience in transporting hazardous materials utilizing bulk packagings and who have completed the Basic Hazardous Materials Workshop or an equivalent. Participants will become familiar with the rules and regulations governing the transportation by highway of hazardous materials in bulk packagings and will demonstrate the application of these requirements through work projects and examination

Alaska Highway bibliography, 3rd edition

DEFF Research Database (Denmark)

Prange, Laurie

Since the early 20th century various schemes were considered for the construction of roads, trails or railways 71 to link the Yukon, northern British Columbia and Alaska to the “outside.” These schemes were motivated by economic interests, including mining, lumber and tourism concerns. During...... the 1920s and 1930s a small but vocal group of “builders” began to campaign for a highway, either a coastal or inland route, to improve the northwest’s economic base. With the impending threat of war in the late 1930s, there was an increasing awareness by the American and Canadian governments...... increasing military needs. The unexpected bombing of Pearl Harbour in December 1941 stimulated interest in the construction of the Alaska Highway by the American government. The U.S. Army Corps of Engineers selected a route based on the location of the NWSR airfields and the military needs for an alternative...

Highway vehicle electric drive in the United States : 2009 status and issues.

Energy Technology Data Exchange (ETDEWEB)

Santini, D. J.; Energy Systems

2011-02-16

The status of electric drive technology in the United States as of early 2010 is documented. Rapidly evolving electric drive technologies discussed include hybrid electric vehicles, multiple types of plug-in hybrid electric vehicles, and battery electric vehicles. Recent trends for hybrids are quantified. Various plug-in vehicles entering the market in the near term are examined. The technical and economic requirements for electric drive to more broadly succeed in a wider range of highway vehicle applications are described, and implications for the most promising new markets are provided. Federal and selected state government policy measures promoting and preparing for electric drive are discussed. Taking these into account, judgment on areas where increased Clean Cities funds might be most productively focused over the next five years are provided. In closing, the request by Clean Cities for opinion on the broad range of research needs providing near-term support to electric drive is fulfilled.

MTU series 2000-06. The next generation of diesel engines for off-highway-applications with emission standard EPA-Tier 4i; MTU Baureihe 2000-06. Die naechste Generation von Dieselmotoren fuer Off-Highway Anwendungen in der Emissionsstufe EPA-Tier 4i

Energy Technology Data Exchange (ETDEWEB)

Kasper, Werner; Wingart, Heiko [MTU Friedrichshafen GmbH, Friedrichshafen (Germany)

2011-07-01

The more stringent emission limits specified by EPA Tier 4 interim - 3.5 g/kWh NOx and 0.1 g/kWh particulate - have applied to engines for off-highway applications with a rated power of more than 560 kW since January 2011. In order to comply with this emission standard, the previous Series 2000 PLN (Pump Line Nozzle) engines for C and I and O and G applications have been superseded by a new design. Features of this new series, consisting of 12V and 16V engines, include common-rail injection, an EGR combustion system based on the dispensing-cylinder concept, and compact, 2-stage, regulated turbocharging. The newly developed, map-controlled wastegate and the new Series ZR125 exhaust turbocharger are being used here for the first time. Specific customer requirements for industrial engines - such as robust design, application options and engine performance map width - have been met rigorously. Despite the more stringent emission limits, the new engine has a wider application range and lower fuel consumption than its predecessor. (orig.)

Vertebrate road kill survey on a highway in southern Brazil

Directory of Open Access Journals (Sweden)

Luiz Liberato Costa Corrêa

2017-06-01

Full Text Available Highways are a major factor acting in the decline of several wildlife populations. Impact occurs due to the continuous flow of motor vehicles over tracks and collision with animals using the same area. This study aimed to list road killed wild vertebrates found in highways in the Pampa Biome, state of Rio Grande do Sul, over an entire year. The taxa found (amphibians, reptiles, birds and mammals were identified to species level and their frequency of occurrence was seasonally registered. Along 2,160 km, we found 318 road killed individuals, totaling 65 species. This number represents an average of 0.147 road killed specimens by kilometer (that is, 1 individual each 7 km. Of these, seven species are under threat of extinction in the state of Rio Grande do Sul. We also found a seasonal pattern among road kills, in which the highest number of road killed animals was registered in the summer and spring months. These results contribute to increase knowledge about which species are most impacted by road kill on highways of the Pampa Biome. Such data can be used as an indicator for the implementation of measures by competent bodies to mitigate impacts of highways in the state of Rio Grande do Sul.

Utilizing the energy from induced wind produce by highway vehicle motion

International Nuclear Information System (INIS)

Abas Abd Wahab; Tong, C.W.

2000-01-01

A research work has been conducted at the Faculty of mechanical Engineering, Universiti Teknologi Malaysia to utilize energy from airflow induced by moving vehicles along the highway for advertising and signboard lighting. Series of data collections have been made at Km 20 Johor Bahru - Kuala Lumpur Plus Highway. Wind anemometer equipped with data recorder has been placed at the highway divider to measure the wind speed induced by the vehicles moving from Johor Bahru to Kuala Lumpur and vice versa. From the data analysis it has been found that the to and from Kuala Lumpur motion of the vehicles induced a stable and continuous source of airflow (wind) ranges from 2 to 4 m/s. The energy in this induced wind has been estimated and has the potential to be used for the above said purpose. Five design models have been tested in the Faculty of mechanical Engineering Low Speed Wind Tunnel and the twisted vertical blades with circular end covers has proven to be the most efficient and suitable. The optimum sizing of the vertical axis wind turbine has also been determined. The details of the collection of wind induced data and analysis, estimation of energy content, the vertical axis wind turbine models testing and results are presented in this paper. (Author)

Development of a GIS-based failure investigation system for highway soil slopes

Science.gov (United States)

Ramanathan, Raghav; Aydilek, Ahmet H.; Tanyu, Burak F.

2015-06-01

A framework for preparation of an early warning system was developed for Maryland, using a GIS database and a collective overlay of maps that highlight highway slopes susceptible to soil slides or slope failures in advance through spatial and statistical analysis. Data for existing soil slope failures was collected from geotechnical reports and field visits. A total of 48 slope failures were recorded and analyzed. Six factors, including event precipitation, geological formation, land cover, slope history, slope angle, and elevation were considered to affect highway soil slope stability. The observed trends indicate that precipitation and poor surface or subsurface drainage conditions are principal factors causing slope failures. 96% of the failed slopes have an open drainage section. A majority of the failed slopes lie in regions with relatively high event precipitation ( P>200 mm). 90% of the existing failures are surficial erosion type failures, and only 1 out of the 42 slope failures is deep rotational type failure. More than half of the analyzed slope failures have occurred in regions having low density land cover. 46% of failures are on slopes with slope angles between 20° and 30°. Influx of more data relating to failed slopes should give rise to more trends, and thus the developed slope management system will aid the state highway engineers in prudential budget allocation and prioritizing different remediation projects based on the literature reviewed on the principles, concepts, techniques, and methodology for slope instability evaluation (Leshchinsky et al., 2015).

23 CFR Appendix B to Subpart B of... - Required Contract Provisions, Appalachian Development Highway System and Local Access Roads...

Science.gov (United States)

2010-04-01

... Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS... washrooms, restaurants and other eating areas, timeclocks, locker rooms and other storage or dressing areas... his basic rate of pay for all hours worked in excess of eight hours in any calendar day or in excess...

Highways of the future : a strategic plan for highway infrastructure research and development

Science.gov (United States)

2008-07-01

This Highways of the FutureA Strategic Plan for Highway Infrastructure Research and Development was developed in response to a need expressed by the staff of the Federal Highway Administration (FHWA) Office of Infrastructure Research and Developme...

Highways and habitat: managing habitat connectivity and landscape permeability for wildlife.

Science.gov (United States)

Jonathan. Thompson

2006-01-01

Millions of miles of highway crisscross the United States . Highways fragment the landscape, affecting the distribution of animal populations and limiting the ability of individuals to disperse between those populations. Moreover, animal-vehicle collisions are a serious hazard to wildlife, not to mention people.Researchers at the PNW Research Station in...

A Generalized Mathematical Model for the Fracture Problem of the Suspended Highway

Directory of Open Access Journals (Sweden)

Zhao Ying

2017-01-01

Full Text Available In order to answer dangling fracture problems of highway, the suspended pavement equivalent for non - suspended pavement, through the special boundary conditions has been suspended highway stress field of expression, in accordance with the 3D fracture model of crack formation, and establish a vacant, a general mathematics model for fracture problems of highway and analysis in highway suspended segment weight and vehicle load limit of highway capacity of Pu For overturning road inPu is less than the force of carrying more than compared to the work and fruit Bridge Hydropower Station Road engineering examples to verify suspended highway should force field expressions for the correctness and applicability. The results show that: when the hanging ratio R 0. 243177 limits of Pu design axle load 100kN. When the vertical crack in the vacant in the direction of length greater than 0. 1, the ultimate bearing capacity is less than the design axle load 100kN; when the hanging ratio R is less than 0. 5, the road to local fracture, the ultimate bearing capacity of suspended stress field expressions in solution; when the hanging ratio is greater than or equal to 0. 5, the road does not reach the limit bearing capacity of the whole body; torque shear surface of the effect is far less than the bending moments on shear planes.

Crash prediction model for two-lane rural highways in the Ashanti region of Ghana

Directory of Open Access Journals (Sweden)

Williams Ackaah

2011-07-01

Full Text Available Crash Prediction Models (CPMs have been used elsewhere as a useful tool by road Engineers and Planners. There is however no study on the prediction of road traffic crashes on rural highways in Ghana. The main objective of the study was to develop a prediction model for road traffic crashes occurring on the rural sections of the highways in the Ashanti Region of Ghana. The model was developed for all injury crashes occurring on selected rural highways in the Region over the three (3 year period 2005–2007. Data was collected from 76 rural highway sections and each section varied between 0.8 km and 6.7 km. Data collected for each section comprised injury crash data, traffic flow and speed data, and roadway characteristics and road geometry data. The Generalised Linear Model (GLM with Negative Binomial (NB error structure was used to estimate the model parameters. Two types of models, the ‘core’ model which included key exposure variables only and the ‘full’ model which included a wider range of variables were developed. The results show that traffic flow, highway segment length, junction density, terrain type and presence of a village settlement within road segments were found to be statistically significant explanatory variables (p<0.05 for crash involvement. Adding one junction to a 1 km section of road segment was found to increase injury crashes by 32.0% and sections which had a village settlement within them were found to increase injury crashes by 60.3% compared with segments with no settlements. The model explained 61.2% of the systematic variation in the data. Road and Traffic Engineers and Planners can apply the crash prediction model as a tool in safety improvement works and in the design of safer roads. It is recommended that to improve safety, highways should be designed to by-pass village settlements and that the number of junctions on a highway should be limited to carefully designed ones.

78 FR 53380 - Value Engineering

Science.gov (United States)

2013-08-29

...-2013-0039] RIN 2125-AF64 Value Engineering AGENCY: Federal Highway Administration (FHWA), U.S.... SUMMARY: The FHWA proposes to update the existing value engineering (VE) regulations to make the... provided. FOR FURTHER INFORMATION CONTACT: Mr. Ken Leuderalbert, Value Engineering and Utilities Program...

A Hierarchical Model and Analysis of Factors Affecting the Adoption of Timber as a Bridge

Science.gov (United States)

Robert L. Smith; Robert J. Bush; Daniel L. Schmoldt

1995-01-01

The Analytical Hierarchy Process was used to characterize the bridge material selection decisions of highway engineers and local highway officials across the United States. State Department of Transportation engineers, private consulting engineers, and local highway officials were personally interviewed in Mississippi, Virginia, Washington, and Wisconsin to identify...

Solid fuel applications to transportation engines

Energy Technology Data Exchange (ETDEWEB)

Rentz, Richard L.; Renner, Roy A.

1980-06-01

The utilization of solid fuels as alternatives to liquid fuels for future transportation engines is reviewed. Alternative liquid fuels will not be addressed nor will petroleum/solid fuel blends except for the case of diesel engines. With respect to diesel engines, coal/oil mixtures will be addressed because of the high interest in this specific application as a result of the large number of diesel engines currently in transportation use. Final assessments refer to solid fuels only for diesel engines. The technical assessments of solid fuels utilization for transportation engines is summarized: solid fuel combustion in transportation engines is in a non-developed state; highway transportation is not amenable to solid fuels utilization due to severe environmental, packaging, control, and disposal problems; diesel and open-cycle gas turbines do not appear worthy of further development, although coal/oil mixtures for slow speed diesels may offer some promise as a transition technology; closed-cycle gas turbines show some promise for solid fuels utilization for limited applications as does the Stirling engine for use of cleaner solid fuels; Rankine cycle engines show good potential for limited applications, such as for locomotives and ships; and any development program will require large resources and sophisticated equipment in order to advance the state-of-the-art.

Qualitative stability assessment of cut slopes along the National Highway-05 around Jhakri area, Himachal Pradesh, India

Science.gov (United States)

Kundu, Jagadish; Sarkar, Kripamoy; Tripathy, Ashutosh; Singh, T. N.

2017-12-01

Several deformation phases in tectonically active Himalayas have rendered the rock masses very complex in terms of structure, lithology and degree of metamorphism. Again, anthropogenic activities such as roads, tunnels and other civil engineering constructions have led to a state of disequilibrium which in many cases, results in failure of rock masses. National Highway-05 around Jhakri area in India is a major connecting route to the China border in the hilly terrains of the state Himachal Pradesh. It cuts through the Himalayan rocks and has a hazardous history of landslides destroying human lives and interrupting communication very frequently. As a contribution towards the mitigation process, a study has been carried out along the highway to analyse kinematic stability and qualitative estimation of rock mass condition through rock mass classification systems. The kinematic analysis shows that the rock slopes are prone to planar and wedge failure. Rock mass rating for most of the locations lies between 7 and 34, representing a poor rock mass quality (Class IV), whereas slope mass rating is more disperse and ranges from 11 to 52 for most of the slopes (Class III, IV and V).

Use of High Resolution LiDAR imagery for landslide identification and hazard assessment, State Highway 6, Haast Pass, New Zealand

Science.gov (United States)

Walsh, Andrew; Zimmer, Valerie; Bell, David

2015-04-01

This study has assessed landslide hazards associated with steep and densely vegetated bedrock slopes adjacent to State Highway 6 through the Southern Alps of New Zealand. The Haast Pass serves as one of only three routes across the Southern Alps, and is a lifeline to the southern West Coast of the South Island with a 1,000km detour required through the nearest alternative pass. Over the last 50 years the highway has been subjected to numerous landslide events that have resulted in lengthy road closures, and the death of two tourists in September 2013. To date no study has been undertaken to identify and evaluate the landslide hazards for the entire Haast Pass, with previous work focusing on post-failure monitoring or investigation of individual landslides. This study identified the distribution and extent of regolith deposits on the schist slopes, and the location and sizes of dormant and active landslides potentially impacting the highway. Until the advent of LiDAR technology it had not been possible to achieve such an evaluation because dense vegetation and very steep topography prevented traditional methods of investigation (mapping; trenching; drilling; geophysics) from being used over a large part of the area. LiDAR technology has provided the tools with which to evaluate large areas of the slopes above the highway quickly and with great accuracy. A very high resolution LiDAR survey was undertaken with a flight line overlap of 70%, resulting in six points per square metre in the raw point cloud and a post-processing point spacing of half a metre. The point cloud was transformed into a digital terrain model, and the surface interpreted using texture and morphology to identify slope materials and landslides. Analysis of the LiDAR DTM revealed that the slopes above the highway consist of variable thicknesses of regolith sourced from landsliding events, as well as large areas of bare bedrock that have not been subjected to landslides and that pose minimal hazard

77 FR 15250 - Value Engineering

Science.gov (United States)

2012-03-15

...-2011-0046] RIN 2125-AF40 Value Engineering AGENCY: Federal Highway Administration (FHWA), DOT. ACTION: Final rule. SUMMARY: This rule updates regulations to enhance the integration of value engineering (VE... Office of Management and Budget (OMB) Circular A-131 on Value Engineering. These revisions also will...

76 FR 36410 - Value Engineering

Science.gov (United States)

2011-06-22

...-2011-0046] RIN 2125-AF40 Value Engineering AGENCY: Federal Highway Administration (FHWA), DOT. ACTION... regulations to enhance the integration of value engineering (VE) analysis in the planning and development of...-131 on Value Engineering. These revisions will also address certain findings contained in a 2007...

Efficient common rail injection systems and intelligent control strategies for the fulfillment of future on/off highway emission limits; Effiziente Common Rail Einspritzsysteme und intelligente Regelstrategien fuer die Erfuellung zukuenftiger On-/Off-Highway Emissionsgrenzwerte

Energy Technology Data Exchange (ETDEWEB)

Schugger, Christian; Krauss, Jost; Projahn, Ulrich; Gerhardt, Juergen [Robert Bosch GmbH, Stuttgart-Feuerbach (Germany)

2011-07-01

The diesel engine is the most common powertrain in commercial applications, and will retain that position for the foreseeable future. In order to meet future emission standards, a wide variety of solutions within combustion process control, exhaust gas aftertreatment, air and injection systems have been developed. The development of common rail injection systems for trucks with 2000 and 2200 bar injection pressure increases the opportunities for internal engine emissions reductions. The systems are designed for medium-duty and heavy-duty applications, on-highway (on-HW) and Off-highway (off-HW). Besides increasing the injection pressure this system features high efficiency in hydraulic pressure generation and injection, making a direct contribution to reducing fuel consumption. To meet even greater requirements, a system with an injection pressure of 2500 bar is under development. As an indicator for the hydraulic efficiency of an injector, the ''effective injection pressure'' is derived. This indicator allows for a uniform rating of different injector concepts. Software functions contribute to the fulfillment of the system requirements over lifetime. An engine speed based function calibrates the pilot injection quantity during low idle operation for on- and off-highway applications. The increase in system pressure results in increased loads for the components. A calibration function for the pump delivery characteristics minimizes pressure overshoots and ensures the pressure control dynamics over lifetime. (orig.)

Regulated and unregulated emissions from highway heavy-duty diesel engines complying with U.S. Environmental Protection Agency 2007 emissions standards.

Science.gov (United States)

Khalek, Imad A; Bougher, Thomas L; Merritt, Patrick M; Zielinska, Barbara

2011-04-01

As part of the Advanced Collaborative Emissions Study (ACES), regulated and unregulated exhaust emissions from four different 2007 model year U.S. Environmental Protection Agency (EPA)-compliant heavy-duty highway diesel engines were measured on an engine dynamometer. The engines were equipped with exhaust high-efficiency catalyzed diesel particle filters (C-DPFs) that are actively regenerated or cleaned using the engine control module. Regulated emissions of carbon monoxide, nonmethane hydrocarbons, and particulate matter (PM) were on average 97, 89, and 86% lower than the 2007 EPA standard, respectively, and oxides of nitrogen (NOx) were on average 9% lower. Unregulated exhaust emissions of nitrogen dioxide (NO2) emissions were on, average 1.3 and 2.8 times higher than the NO, emissions reported in previous work using 1998- and 2004-technology engines, respectively. However, compared with other work performed on 1994- to 2004-technology engines, average emission reductions in the range of 71-99% were observed for a very comprehensive list of unregulated engine exhaust pollutants and air toxic contaminants that included metals and other elements, elemental carbon (EC), inorganic ions, and gas- and particle-phase volatile and semi-volatile organic carbon (OC) compounds. The low PM mass emitted from the 2007 technology ACES engines was composed mainly of sulfate (53%) and OC (30%), with a small fraction of EC (13%) and metals and other elements (4%). The fraction of EC is expected to remain small, regardless of engine operation, because of the presence of the high-efficiency C-DPF in the exhaust. This is different from typical PM composition of pre-2007 engines with EC in the range of 10-90%, depending on engine operation. Most of the particles emitted from the 2007 engines were mainly volatile nuclei mode in the sub-30-nm size range. An increase in volatile nanoparticles was observed during C-DPF active regeneration, during which the observed particle number was

75 FR 19670 - Marine Highway Projects

Science.gov (United States)

2010-04-15

... DEPARTMENT OF TRANSPORTATION Maritime Administration Marine Highway Projects ACTION: Solicitation of applications for Marine highway projects. SUMMARY: The Department of Transportation is soliciting applications for Marine Highway Projects as specified in the America's Marine Highway Program Final Rule, MARAD...

Residential satisfaction close to highways : The impact of accessibility, nuisances and highway adjustment projects

NARCIS (Netherlands)

Hamersma, Marije; Tillema, Taede; Sussman, Joseph; Arts, Jos

In this paper we focus on gaining insight into the residential satisfaction of households near highways, based on survey data collected among 1225 respondents in the Netherlands living within 1000 m from a highway. Ordinal regression was used to study the impact of highway externalities on

Ground-water problems in highway construction and maintenance

Science.gov (United States)

Rasmussen, W.C.; Haigler, L.B.

1953-01-01

This report discusses the occurrence of ground water in relation to certain problems in highway construction and maintenance. These problems are: the subdrainage of roads; quicksand; the arrest of soil creep in road cuts; the construction of lower and larger culverts necessitated by the farm-drainage program; the prevention of failure of bridge abutments and retaining walls; and the water-cement ratio of sub-water-table concrete. Although the highway problems and suggested solutions are of general interest, they are considered with special reference to the State of Delaware, in relation to the geology of that State. The new technique of soil stabilization by electroosmosis is reviewed in the hope that it might find application here in road work and pile setting, field application by the Germans and Russians is reviewed.

Highway Electrification And Automation

OpenAIRE

Shladover, Steven E.

1992-01-01

This report addresses how the California Department of Transportation and the California PATH Program have made efforts to evaluate the feasibility and applicability of highway electrification and automation technologies. In addition to describing how the work was conducted, the report also describes the findings on highway electrification and highway automation, with experimental results, design study results, and a region-wide application impacts study for Los Angeles.

The highway and railroad operating environments for hazardous shipments in the United States - safer in the '90s?

International Nuclear Information System (INIS)

Saricks, C.L.; Tompkins, M.M.

2000-01-01

This paper seeks to illuminate the status of transportation safety and risk for large-quantity shipments of spent commercial reactor fuel and mixed and hazardous wastes by examining road and rail accident and vehicular travel data from the mid-1990s. Of special interest are the effect of speed limit changes on controlled-access expressways (chiefly the Interstate Highway System) and the possible effect of season-to-season climatic variation on road transport. We found that improvements in railroad technology and infrastructure have created a safer overall operating environment for railroad freight shipments. We also found recent evidence of an increase in accident rates of heavy combination trucks in states that have raised highway speed limits. Finally, cold weather increases road transport risk, while conditions associated with higher ambient temperatures do not. This last finding is in contrast to rail transport, for which the literature associates both hot and cold temperature extremes with higher accident rates

Proposal for a New Model for Highway Records in the Republic of Croatia

Directory of Open Access Journals (Sweden)

Rinaldo Paar

2012-05-01

Full Text Available Highways are public roads, whose function is to integrate Croatia in the European transport system, link the regions of Croatia and facilitate transit traffic. They are public property for general use, owned by the Republic of Croatia, and they cannot be the subject of acquisition or other proprietary rights of any kind. Today, there are two types of highway record-keeping. The first is conducted by leading companies authorised to manage highways in order to develop a highway database, or create a highway register. The second is conducted by land-management systems; the Cadastre and Land Registry. They are the official public registers for keeping records of land plots, buildings and other structures, and their ownership. Procedures that need to be implemented in the second type of record-keeping often get "stuck" in practice. Based on the problems identified in this model and an analysis of the state of record-keeping, a proposal for a new model for highway records in the Cadastre and Land Registry is given. Keywords: highways; building plot; expropriation; record; Cadastre; Land Registry

FHWA and USGS cooperate to provide environmental engineering/science curricula developed for the stochastic empirical loading and dilution model (SELDM) to universities and colleges.

Science.gov (United States)

2016-01-01

Managers and engineers at the Federal Highway : Administration (FHWA) and State Departments of : Transportation (DOTs) indicate that they need researchers, : employees, consultants, and regulators who understand the : unique challenges involved in ma...

Development of a highway safety fundamental course.

Science.gov (United States)

2015-05-01

Although the need for road safety education was first recognized in the 1960s, it has become an increasingly urgent issue : in recent years. To fulfill the hefty goal set up by the AASHTO Highway Safety Strategy and by state DOTS, it is critical : to...

78 FR 53497 - Uniform Procedures for State Highway Safety Grant Programs

Science.gov (United States)

2013-08-29

...., Eastern Time, Monday through Friday, except Federal holidays. Whichever way you submit your comments... holidays. FOR FURTHER INFORMATION CONTACT: Barbara Sauers, Program Manager, National Highway Traffic Safety... Columbia, Puerto Rico, U.S. Virgin Islands, Guam, American Samoa, the Commonwealth of the Northern Mariana...

Potential Fuel Economy Improvements from the Implementation of cEGR and CDA on an Atkinson Cycle Engine

Science.gov (United States)

Present the implementation of cEGR and CDA on an Atkinson engine and use steady state fuel consumption maps to estimate the technologies’ potential fuel economy improvements over the FTP and Highway tests. In addition to use fuel weighted modes to determine possible fuel economy...

Solid-state laser engineering

CERN Document Server

Koechner, Walter

1992-01-01

This book is written from an industrial perspective and provides a detailed discussion of solid-state lasers, their characteristics, design and construction. Emphasis is placed on engineering and practical considerations. The book is aimed mainly at the practicing scientist or engineer who is interested in the design or use of solid-state lasers, but the comprehensive treatment of the subject will make the work useful also to students of laser physics who seek to supplement their theoretical knowledge with engineering information. In order to present the subject as clearly as possible, phenomenological descriptions using models have been used rather than abstract mathematical descriptions. This results in a simplified presentation. The descriptions are enhanced by the inclusion of numerical and technical data, tables and graphs. This new edition has been updated and revised to take account of important new developments, concepts, and technologies that have emerged since the publication of the first and second...

R2 & NE: NAVTEQ 2011 Q3 Interstate Highway Network for the United States, including Puerto Rico and the US Virgin Islands in SDC Format

Data.gov (United States)

U.S. Environmental Protection Agency — The INTERSTATES layer contains the Interstate Highway network, using NAVTEQ Functional Class=1 for United States and Canada. This 5 layer SDC dataset represents a...

Journal of transportation engineering

National Research Council Canada - National Science Library

1983-01-01

The Journal of Transportation Engineering contains technical and professional articles on the planning, design, construction, maintenance, and operation of air, highway, rail, and urban transportation...

Workshop report : joint workshop on liability issues in advanced vehicle control and automated highway systems

Science.gov (United States)

1997-02-05

The National Automated Highway System Consortium (NAHSC), ITS America and the American Association of State Highway & Transportation Officials (AASHTO) co-sponsored a two-day workshop in Washington, DC on February 5-6, 1997 to examine the liability i...

Federal-aid highways : FHWA has improved its risk management approach, but needs to improve its oversight of project costs.

Science.gov (United States)

2009-07-01

The federal-aid highway program : provides about $33 billion a year to : states for highway projects. The : federal government provides : funding for and oversees this : program, while states largely : choose and manage the projects. : As requested, ...

Impact of nuclear waste traffic on highways

International Nuclear Information System (INIS)

Sebaaly, P.E.; Siddharthan, R.; Epps, J.A.

1994-01-01

A system was developed to evaluate the impact of nuclear waste traffic on the structural performance of highway pavements throughout the state of Nevada. The associated needs of maintenance and rehabilitations can also be evaluated along with their costs. This paper summarizes the system and provides two sample analyses

The green highway forum

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

In late 2004, as part of American Coal Ash Association's (ACAA) strategic planning process, a plan was approved by its Board of Directors implementing a 'green highways' concept which emphasized use of coal combustion products (CCPs) in highways in a variety of ways including being used alone, in combination with other forms of CCPs, and combined with non ash materials. The incentives behind the developed concept were the derived advantages from beneficial technical economic and environmental impacts. Although the primary use of fly ash is concrete, other forms of CCPs could be considered for more non-traditional highway applications. For example, these might include soils stabilization, binders for in-place pavement recycling, use in flowable fills, aggregates, source materials for structural fills and embankments, components in manufactured soils, and for granular base courses beneath pavements. At this same time, unknown to ACCA, EPA Region 3 in Philadelphia was working with the Wetlands and Watershed Work Group, a non-profit organization involved in wetlands policy and management along with the Federal Highway Administration (FHWA) on their own Green Highways initiative. These groups were planning a conference, the 'Green Highway Forum'. This was held in College Park, Maryland at the University of Maryland, Nov 8-10 2005. At the conference a draft 'roadmap' was presented as a guide to executive level participants bringing the diverse viewpoints of many agencies and interest groups together. Ten guiding principals were considered. The 'Green Highways' is a new effort to recognize the 'greenness' of many projects already completed and those to be initiated. 2 photos.

Checklist for transition to new highway fuel(s).

Energy Technology Data Exchange (ETDEWEB)

Risch, C.; Santini, D.J. (Energy Systems)

2011-12-15

Transportation is vital to the U.S. economy and society. As such, U.S. Presidents have repeatedly stated that the nation needs to reduce dependence on petroleum, especially for the highway transportation sector. Throughout history, highway transportation fuel transitions have been completed successfully both in United States and abroad. Other attempts have failed, as described in Appendix A: Historical Highway Fuel Transitions. Planning for a transition is critical because the changes can affect our nation's ability to compete in the world market. A transition will take many years to complete. While it is tempting to make quick decisions about the new fuel(s) of choice, it is preferable and necessary to analyze all the pertinent criteria to ensure that correct decisions are made. Doing so will reduce the number of changes in highway fuel(s). Obviously, changes may become necessary because of occurrences such as significant technology breakthroughs or major world events. With any and all of the possible transitions to new fuel(s), the total replacement of gasoline and diesel fuels is not expected. These conventional fuels are envisioned to coexist with the new fuel(s) for decades, while the revised fuel and vehicle infrastructures are implemented. The transition process must analyze the needs of the primary 'players,' which consist of the customers, the government, the fuel industry, and the automotive industry. To maximize the probability of future successes, the prime considerations of these groups must be addressed. Section 2 presents a succinct outline of the Checklist. Section 3 provides a brief discussion about the groupings on the Checklist.

Highway Construction in the U.S.: Costs, Benefits, Dependence

Science.gov (United States)

Childress, Vincent W.

2013-01-01

Few people truly recognize the influence of modern transportation on society. In the United States, that includes the influence of highways that allow the citizenry to travel freely, the strength of the economy, and the country's national security. In all cases, the geography of the United States influenced the evolution of transportation and…

Job Prospects for Civil Engineers.

Science.gov (United States)

Basta, Nicholas

1985-01-01

Government programs and renewed industrial activity have combined with stable enrollments to create bright job prospects for civil engineers. Areas with good opportunities include highway reconstruction and rehabilitation, water-resource management, and new factory construction. The subspecialty of structural engineering has a growing need in…

Engine testing of ceramic cam-roller followers

Energy Technology Data Exchange (ETDEWEB)

Kalish, Y. (Detroit Diesel Corp., MI (United States))

1992-04-01

For several years, DDC has been developing monolithic ceramic heat engine components. One of the components, developed for an application in our state-of-the-art on-highway, heavy-duty diesel engine, the Series 60, is a silicon nitride cam-roller follower. Prior to starting this program, each valve train component in the Series 60 was considered for conversion to a ceramic material. Many advantages and disadvantages (benefits and risks) were considered. From this effort, one component was selected, the cam-roller follower. Using a system design approach, a ceramic cam-roller follower offered functional improvement at a reasonable cost. The purpose of the project was to inspect and test 100 domestically produced silicon nitride cam-roller followers built to the requirements of the DDC series 60 engine.

OML-Highway within the framework of SELMAGIS

DEFF Research Database (Denmark)

Jensen, Steen Solvang; Becker, Thomas; Ketzel, Matthias

This report describes the OML-Highway model and its integration into SELMAGIS. The National Environmental Research Institute (NERI) has developed the OML-Highway model and Ingenieurbüro Lohmeyer from Germany has developed SELMAGIS. The OML-Highway model is able to calculate air pollution concentr...... concentration levels at receptor points along a highway road network, while SELMAGIS is a framework for calculating and representing air pollutant emissions and concentrations in a geographical information system (GIS)......This report describes the OML-Highway model and its integration into SELMAGIS. The National Environmental Research Institute (NERI) has developed the OML-Highway model and Ingenieurbüro Lohmeyer from Germany has developed SELMAGIS. The OML-Highway model is able to calculate air pollution...

78 FR 9771 - Federal Highway Administration

Science.gov (United States)

2013-02-11

... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Notice of Final Federal Agency Action on Proposed Transportation Project in Illinois and Indiana AGENCY: Federal Highway Administration...., Acting Division Administrator, Federal Highway Administration, 3250 Executive Park Drive, Springfield...

STATE_SYSTEM

Data.gov (United States)

Kansas Data Access and Support Center — This dataset is a single centerline highway network representation of the 10,000 miles Kansas State Highway System (Interstate, U.S., and Kansas routes). The state...

A Causal and Real-Time Capable Power Management Algorithm for Off-Highway Hybrid Propulsion Systems

Directory of Open Access Journals (Sweden)

Johannes Schalk

2016-12-01

Full Text Available Hybrid propulsion systems allow for a reduction of fuel consumption and pollutant emissions of future off-highway applications. A challenging aspect of a hybridization is the larger number of system components that further increases both the complexity and the diversification of such systems. Hence, beside a standardization on the hardware side for off-highway systems, a high flexibility and modularity of the control schemes is required to employ them in as many different applications as possible. In this paper, a causal optimization-based power management algorithm is introduced to control the power split between engine and electric machine in a hybrid powertrain. The algorithm optimizes the power split to achieve the maximum power supply efficiency and, thereby, considers the energy cost for maintaining the battery charge. Furthermore, the power management provides an optional function to control the battery state of charge in such a way that a target value is attained. In a simulation case study, the potential and the benefits of the proposed power management for the hybrid powertrain—aiming at a reduction of the fuel consumption of a DMU (diesel multiple unit train operated on a representative track—will be shown.

Area Based Models of New Highway Route Growth

OpenAIRE

David Levinson; Wei Chen

2007-01-01

Empirical data and statistical models are used to answer the question of where new highway routes are most likely to be located. High-quality land-use, population distribution and highway network GIS data for the Twin CitiesMetropolitan Area from 1958 to 1990 are developed for this study. The highway system is classified into three levels, Interstate highways, divided highways, and secondary highways. Binary logit models estimate the new route growth probability of divided highways and second...

75 FR 18014 - Federal Highway Administration

Science.gov (United States)

2010-04-08

... DEPARTMENT OF TRANSPORTATION Federal Highway Administration AGENCY: Federal Highway Administration (FHWA), DOT. ACTION: Notice of Availability regarding a Finding of No Significant Impact (FONSI): U.S.... FOR FURTHER INFORMATION CONTACT: Federal Highway Administration, Kentucky Division: Mr. Greg Rawlings...

76 FR 47288 - Notice of Final Federal Agency Actions on Proposed Highway in California

Science.gov (United States)

2011-08-04

... highway project will be barred unless the claim is filed on or before January 31, 2012. If the Federal law... following highway project in the State of California: The addition of bus rapid transit stations and... actions by the Federal agencies, and the laws under which such actions were taken, are described in the...

The highway capacity manual a conceptual and research history

CERN Document Server

Roess, Roger P

2014-01-01

Since 1950, the Highway Capacity Manual has been a standard used in the planning, design, analysis, and operation of virtually any highway traffic facility in the United States. It has also been widely used abroad, and has spurred the development of similar manuals in other countries. The twin concepts of capacity and level of service have been developed in the manual, and methodologies have been presented that allow highway traffic facilities to be designed on a common basis, and allow for the analysis of operational quality under various traffic demand scenarios. The manual also addresses related pedestrian, bicycle, and transit issues.   This book details the fundamental development of the concepts of capacity and level of service, and of the specific methodologies developed to describe them over a wide range of facility types. The book is comprised of two volumes. Volume 1 (this book) focuses on the development of basic principles, and their application to uninterrupted flow facilities: freeways, multila...

Using electronic document management systems to manage highway project files.

Science.gov (United States)

2011-12-12

"WisDOTs Bureau of Technical Services is interested in learning about the practices of other state departments of : transportation in developing and implementing an electronic document management system to manage highway : project files"

The hydrogen highway

International Nuclear Information System (INIS)

Grigg, A.

2004-01-01

'Full text:' The Hydrogen Highway in British Columbia, Canada, is a coordinated, large-scale demonstration and deployment program aimed at accelerating the commercialization of hydrogen and fuel cell technologies and products. It will be a showcase for fuel cell vehicles, refuelling stations and stationary power systems leading up to the 2010 Olympic and Paralympic Winter Games in Whistler, BC. The Hydrogen Highway is designed to help address many of the challenges to commercialization identified in the Canadian Fuel Cell Commercialization Roadmap. The project will create an early adopter network of hydrogen and fuel cell microenvironments where technology developers and users can learn about the technical, economic, environmental and social impacts of products. The Hydrogen Highway will give the public and potential purchasers an opportunity to feel, touch and see the new technology, as well as provide the industry with a venue in which to develop industry standards and supply chains of materials and components. While demonstration and deployment programs are a recognized and necessary component in the process to commercialize hydrogen and fuel cell technologies, there is no handbook describing how it should be done. This paper will describe the history, objectives, project details and some of the challenges associated with establishing Canada's Hydrogen Highway. (author)

The hydrogen highway

Energy Technology Data Exchange (ETDEWEB)

Grigg, A. [Fuel Cells Canada, Vancouver, British Columbia (Canada)

2004-07-01

'Full text:' The Hydrogen Highway in British Columbia, Canada, is a coordinated, large-scale demonstration and deployment program aimed at accelerating the commercialization of hydrogen and fuel cell technologies and products. It will be a showcase for fuel cell vehicles, refuelling stations and stationary power systems leading up to the 2010 Olympic and Paralympic Winter Games in Whistler, BC. The Hydrogen Highway is designed to help address many of the challenges to commercialization identified in the Canadian Fuel Cell Commercialization Roadmap. The project will create an early adopter network of hydrogen and fuel cell microenvironments where technology developers and users can learn about the technical, economic, environmental and social impacts of products. The Hydrogen Highway will give the public and potential purchasers an opportunity to feel, touch and see the new technology, as well as provide the industry with a venue in which to develop industry standards and supply chains of materials and components. While demonstration and deployment programs are a recognized and necessary component in the process to commercialize hydrogen and fuel cell technologies, there is no handbook describing how it should be done. This paper will describe the history, objectives, project details and some of the challenges associated with establishing Canada's Hydrogen Highway. (author)

Occurrence of lead and zinc in soils and plants at the margins of a highway with heavy traffic

Directory of Open Access Journals (Sweden)

Luis Celso da Silva

2013-12-01

Full Text Available The occurrences of lead (Pb and zinc (Zn were determined in soil and grasses collected at three points on stretch of 143 km of the Presidente Dutra highway between the states of São Paulo and Rio de Janeiro. The soil and plant samples were collected by sampling transections perpendicular to the highway at distances of 0, 10, 20, 35 and 50 m from the highway edge. Concentrations of Pb and Zn were higher in samples closest to the highway edge, decreasing with increasing distance from the road. There were positive correlation coefficients between the metal concentration in the soil and the metal concentration in the plant. Concentrations of Pb found in soil samples were below the reference value established for the soil quality in the state of São Paulo, while for Zn, up to 10 m away from the highway edge, the concentration was higher than the reference value.

Cost estimate modeling of transportation management plans for highway projects.

Science.gov (United States)

2012-05-01

Highway rehabilitation and reconstruction projects frequently cause road congestion and increase safety concerns while limiting access for road users. State Transportation Agencies (STAs) are challenged to find safer and more efficient ways to renew ...

A Hierarchical Analysis of Bridge Decision Makers ... The Role of New Technology Adoption in the Timber Bridge Market: Special Project

Science.gov (United States)

Robert L. Smith; Robert J. Bush; Daniel L. Schmoldt

1995-01-01

Bridge design engineers and local highway officials make bridge replacement decisions across the United States. The Analytical Hierarchy Process was used to characterize the bridge material selection decision of these individuals. State Department of Transportation engineers, private consulting engineers, and local highway officials were personally interviewed in...

Vehicle safety telemetry for automated highways

Science.gov (United States)

Hansen, G. R.

1977-01-01

The emphasis in current, automatic vehicle testing and diagnosis is primarily centered on the proper operation of the engine. Lateral and longitudinal guidance technologies, including speed control and headway sensing for collision avoidance, are reviewed. The principal guidance technique remains the buried wire. Speed control and headway sensing, even though they show the same basic elements in braking and fuel systems, are proceeding independently. The applications of on-board electronic and microprocessor techniques were investigated; each application (emission control, spark advance, or anti-slip braking) is being treated as an independent problem is proposed. A unified bus system of distributed processors for accomplishing the various functions and testing required for vehicles equipped to use automated highways.

Dynamic Estimation on Output Elasticity of Highway Capital Stock in China

Science.gov (United States)

Li, W. J.; Zuo, Q. L.; Bai, Y. F.

2017-12-01

By using the Perpetual Inventory Method to calculate the capital stock of highway in China from 1988 to 2016, the paper builds the State Space Model based on Translog Production Function, according to the Ridge Regression and Kalman Filter Method, the dynamic estimation results of output elasticity are measured continuously and analyzed. The conclusions show that: Firstly, China’s growth speed on highway industry capital stock are divided into three stages which are respectively from 1988 to 2000, from 2001 to 2009 and from 2010 to 2016, during which shows steady growth, between which reflect rapid growth; Secondly, the output elasticity of highway capital stock, being between 0.154 and 0.248, is slightly larger than the output elasticity of human input factor, lower than the output elasticity of the technical level, shows positive effect on transport economy and rises steadily, but the output efficiency is low on the whole; Thirdly, around the year of 2010, the scale pay on highway industry begins to highlight the characteristic of increase.

Simulating deforestation and carbon loss in Amazonia: impacts in Brazil's Roraima state from reconstructing Highway BR-319 (Manaus-Porto Velho).

Science.gov (United States)

Barni, Paulo Eduardo; Fearnside, Philip Martin; Graça, Paulo Maurício Lima de Alencastro

2015-02-01

Reconstruction of Highway BR-319 (Manaus-Porto Velho) would allow for access from the "arc of deforestation" in the southern part of Brazil's Amazon region to vast blocks of forests in central and northern Amazonia. Building roads is known to be a major driver of deforestation, allowing entry of squatters, and other actors. Rather than deforestation along the highway route, here we consider the road's potential for stimulating deforestation in a separate location, approximately 550 km north of BR-319's endpoint in Manaus. Reconstructing BR-319 has great potential impact to start a new wave of migration to this remote region. The southern portion of the state of Roraima, the focus of our study, is already connected to Manaus by Highway BR-174. We modeled deforestation in southern Roraima and simulated carbon emissions between 2007 and 2030 under four scenarios. Simulations used the AGROECO model in DINAMICA-EGO © software. Two scenarios were considered with reconstruction of BR-319 and two without this road connection. For each of the two possibilities regarding BR-319, simulations were developed for (1) a "conservation" (CONSERV) scenario that assumes the creation of a series of protected areas, and (2) a "business-as-usual" (BAU) scenario that assumes no additional protected areas. Results show that by 2030, with BR-319 rebuilt, deforestation carbon emissions would increase between 19% (CONSERV) and 42% (BAU) over and above those corresponding to no-road scenarios.

Bayou Corne sinkhole : control measurements of State Highway 70 in Assumption Parish, Louisiana.

Science.gov (United States)

2014-01-01

This project measured and assessed the surface stability of the portion of LA Highway 70 that is : potentially vulnerable to the Assumption Parish sinkhole. Using Global Positioning Systems (GPS) : enhanced by a real-time network (RTN) of continuousl...

Engineering quantum hyperentangled states in atomic systems

Science.gov (United States)

Nawaz, Mehwish; -Islam, Rameez-ul; Abbas, Tasawar; Ikram, Manzoor

2017-11-01

Hyperentangled states have boosted many quantum informatics tasks tremendously due to their high information content per quantum entity. Until now, however, the engineering and manipulation of such states were limited to photonic systems only. In present article, we propose generating atomic hyperentanglement involving atomic internal states as well as atomic external momenta states. Hypersuperposition, hyperentangled cluster, Bell and Greenberger-Horne-Zeilinger states are engineered deterministically through resonant and off-resonant Bragg diffraction of neutral two-level atoms. Based on the characteristic parameters of the atomic Bragg diffraction, such as comparatively large interaction times and spatially well-separated outputs, such decoherence resistant states are expected to exhibit good overall fidelities and offer the evident benefits of full controllability, along with extremely high detection efficiency, over the counterpart photonic states comprised entirely of flying qubits.

Engineering arbitrary pure and mixed quantum states

International Nuclear Information System (INIS)

Pechen, Alexander

2011-01-01

Controlled manipulation by atomic- and molecular-scale quantum systems has attracted a lot of research attention in recent years. A fundamental problem is to provide deterministic methods for controlled engineering of arbitrary quantum states. This work proposes a deterministic method for engineering arbitrary pure and mixed states of a wide class of quantum systems. The method exploits a special combination of incoherent and coherent controls (incoherent and coherent radiation) and has two properties which are specifically important for manipulating by quantum systems: it realizes the strongest possible degree of their state control, complete density matrix controllability, meaning the ability to steer arbitrary pure and mixed initial states into any desired pure or mixed final state, and it is all-to-one, such that each particular control transfers all initial system states into one target state.

DOT Official County Highway Map

Data.gov (United States)

Minnesota Department of Natural Resources — The County Highway Map theme is a scanned and rectified version of the original MnDOT County Highway Map Series. The cultural features on some of these maps may be...

Federal Highway Administration research and technology evaluation final report : Eco-Logical

Science.gov (United States)

2018-03-01

This report documents an evaluation of Federal Highway Administrations (FHWA) Research and Technology Programs activities on the implementation of the Eco-Logical approach by State transportation departments and metropolitan planning organizati...

A feasibility study for Arizona's roadway safety management process using the Highway Safety Manual and SafetyAnalyst : final report.

Science.gov (United States)

2016-07-01

To enable implementation of the American Association of State Highway Transportation (AASHTO) Highway Safety Manual using : SaftetyAnalyst (an AASHTOWare software product), the Arizona Department of Transportation (ADOT) studied the data assessment :...

Solar Highway Program : from concept to reality : a guidebook for Departments of Transportation to develop solar photovoltaic systems in the highway right-of-way.

Science.gov (United States)

2016-11-01

This guidebook is intended to provide an overview for state Departments of Transportation (DOTs) of the process for developing solar photovoltaic (PV) projects in the highway right-of-way. The goal is to help others navigate the process towards a suc...

Engine testing of ceramic cam-roller followers. Final report

Energy Technology Data Exchange (ETDEWEB)

Kalish, Y. [Detroit Diesel Corp., MI (United States)

1992-04-01

For several years, DDC has been developing monolithic ceramic heat engine components. One of the components, developed for an application in our state-of-the-art on-highway, heavy-duty diesel engine, the Series 60, is a silicon nitride cam-roller follower. Prior to starting this program, each valve train component in the Series 60 was considered for conversion to a ceramic material. Many advantages and disadvantages (benefits and risks) were considered. From this effort, one component was selected, the cam-roller follower. Using a system design approach, a ceramic cam-roller follower offered functional improvement at a reasonable cost. The purpose of the project was to inspect and test 100 domestically produced silicon nitride cam-roller followers built to the requirements of the DDC series 60 engine.

Research notes : monitoring water quality along highways.

Science.gov (United States)

2006-12-01

Runoff from highways typically picks up a variety of pollutants from the roadway. These pollutants include sediment, trash, residue from petroleum products, and heavy metals. Depending on the highway and its geographic setting, highway runoff can eva...

A visualization method for teaching the geometric design of highways

Science.gov (United States)

2000-04-11

In this project the authors employed state-of-the-art technology for developing visualization tools for teaching highway design. Specifically, the authors used photolog images as the basis for developing dynamic 3-D models of selected geometric eleme...

Missouri Highway Safety Manual Recalibration

Science.gov (United States)

2018-05-01

The Highway Safety Manual (HSM) is a national manual for analyzing the highway safety of various facilities, including rural roads, urban arterials, freeways, and intersections. The HSM was first published in 2010, and a 2014 supplement addressed fre...

75 FR 18095 - America's Marine Highway Program

Science.gov (United States)

2010-04-09

... Marine Highway Transportation. Authority: Energy Independence and Security Act of 2007, Sections 1121...] RIN 2133-AB70 America's Marine Highway Program AGENCY: Maritime Administration, Department of... interim final rule that established America's Marine Highway Program, under which the Secretary will...

Vehicles In Highway Communication System Using ZigBee And Bluetooth Network

Directory of Open Access Journals (Sweden)

EiThuzarKhin

2015-06-01

Full Text Available Abstract Globally many vehicle types operate on the highway system. And highway infrastructure stakeholders have developed a number of products intended to facilitate the identification of critical assets and provide guidance for conductiong security planning. Many of these productsare conducted as joint efforts between the state highway agencies.The main aim of the system is to have a network between Roadside Unit RSU and On-Board Unit OBU and between On-Board Unit OBU and another On-Board Unit OBU . ZigBee is a consortium of software hardware and services companies having improved a common standard for wireless networking of sensors and microcontrollers.Bluetooth is a technology of wireless standard for exchanging data for short distances. In this article we point out sending data to the drivers via not only ZigBee module but also Bluetooth module.

2012 national state safety engineers and traffic engineers peer-to-peer workshop.

Science.gov (United States)

2013-11-01

The Illinois Department of Transportation (IDOT) and the Illinois Center for Transportation (ICT) sponsored and hosted the : 2012 National State Safety Engineers and Traffic Engineers Peer-to-Peer Workshop on November 14 and 15, 2012, at the : Hyatt ...

Sensor Systems for Vehicle Environment Perception in a Highway Intelligent Space System

Science.gov (United States)

Tang, Xiaofeng; Gao, Feng; Xu, Guoyan; Ding, Nenggen; Cai, Yao; Ma, Mingming; Liu, Jianxing

2014-01-01

A Highway Intelligent Space System (HISS) is proposed to study vehicle environment perception in this paper. The nature of HISS is that a space sensors system using laser, ultrasonic or radar sensors are installed in a highway environment and communication technology is used to realize the information exchange between the HISS server and vehicles, which provides vehicles with the surrounding road information. Considering the high-speed feature of vehicles on highways, when vehicles will be passing a road ahead that is prone to accidents, the vehicle driving state should be predicted to ensure drivers have road environment perception information in advance, thereby ensuring vehicle driving safety and stability. In order to verify the accuracy and feasibility of the HISS, a traditional vehicle-mounted sensor system for environment perception is used to obtain the relative driving state. Furthermore, an inter-vehicle dynamics model is built and model predictive control approach is used to predict the driving state in the following period. Finally, the simulation results shows that using the HISS for environment perception can arrive at the same results detected by a traditional vehicle-mounted sensors system. Meanwhile, we can further draw the conclusion that using HISS to realize vehicle environment perception can ensure system stability, thereby demonstrating the method's feasibility. PMID:24834907

Simulation of water-surface elevations for a hypothetical 100-year peak flow in Birch Creek at the Idaho National Engineering and Environmental Laboratory, Idaho

International Nuclear Information System (INIS)

Berenbrock, C.; Kjelstrom, L.C.

1997-01-01

Delineation of areas at the Idaho National Engineering and Environmental Laboratory that would be inundated by a 100-year peak flow in Birch Creek is needed by the US Department of Energy to fulfill flood-plain regulatory requirements. Birch Creek flows southward about 40 miles through an alluvium-filled valley onto the northern part of the Idaho National Engineering and Environmental laboratory site on the eastern Snake River Plain. The lower 10-mile reach of Birch Creek that ends in Birch Creek Playa near several Idaho National Engineering and Environmental Laboratory facilities is of particular concern. Twenty-six channel cross sections were surveyed to develop and apply a hydraulic model to simulate water-surface elevations for a hypothetical 100-year peak flow in Birch Creek. Model simulation of the 100-year peak flow (700 cubic feet per second) in reaches upstream from State Highway 22 indicated that flow was confined within channels even when all flow was routed to one channel. Where the highway crosses Birch Creek, about 315 cubic feet per second of water was estimated to move downstream--115 cubic feet per second through a culvert and 200 cubic feet per second over the highway. Simulated water-surface elevation at this crossing was 0.8 foot higher than the elevation of the highway. The remaining 385 cubic feet per second flowed southwestward in a trench along the north side of the highway. Flow also was simulated with the culvert removed. The exact location of flood boundaries on Birch Creek could not be determined because of the highly braided channel and the many anthropogenic features (such as the trench, highway, and diversion channels) in the study area that affect flood hydraulics and flow. Because flood boundaries could not be located exactly, only a generalized flood-prone map was developed

77 FR 31632 - Intent To Request Approval From OMB of One New Public Collection of Information: Highway Baseline...

Science.gov (United States)

2012-05-29

... and assets owned and operated by state departments of education and transportation. The Highway BASE... Transportation (DOT), Federal Motor Carrier Safety Administration (FMCSA), school bus, motorcoach companies... consistent road map for highway systems to address security and emergency program vulnerabilities. In...

Gulf-Wide Information System, Louisiana Highways, Geographic NAD83, LDWF (2001) [esi_primaryroads_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This dataset represents the state maintained primary and secondary road network of Louisiana. The dataset includes Interstates, US highways, and Louisiana State...

Infiltration of stormwater from highway operations to reduce coastal pollution.

Science.gov (United States)

2012-12-01

The coastal waters of Hawaii are extremely important for recreation as well as for the health of : the marine environment. Runoff from the construction and operation of highways can be a : source of pollution to coastal waters. Individual states in t...

40 CFR 86.419-78 - Engine displacement, motorcycle classes.

Science.gov (United States)

2010-07-01

... the nearest whole cubic centimetre, in accordance with ASTM E 29-67. (2) For rotary engines... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Engine displacement, motorcycle...) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES...

On the required complexity of vehicle dynamic models for use in simulation-based highway design.

Science.gov (United States)

Brown, Alexander; Brennan, Sean

2014-06-01

This paper presents the results of a comprehensive project whose goal is to identify roadway design practices that maximize the margin of safety between the friction supply and friction demand. This study is motivated by the concern for increased accident rates on curves with steep downgrades, geometries that contain features that interact in all three dimensions - planar curves, grade, and superelevation. This complexity makes the prediction of vehicle skidding quite difficult, particularly for simple simulation models that have historically been used for road geometry design guidance. To obtain estimates of friction margin, this study considers a range of vehicle models, including: a point-mass model used by the American Association of State Highway Transportation Officials (AASHTO) design policy, a steady-state "bicycle model" formulation that considers only per-axle forces, a transient formulation of the bicycle model commonly used in vehicle stability control systems, and finally, a full multi-body simulation (CarSim and TruckSim) regularly used in the automotive industry for high-fidelity vehicle behavior prediction. The presence of skidding--the friction demand exceeding supply--was calculated for each model considering a wide range of vehicles and road situations. The results indicate that the most complicated vehicle models are generally unnecessary for predicting skidding events. However, there are specific maneuvers, namely braking events within lane changes and curves, which consistently predict the worst-case friction margins across all models. This suggests that any vehicle model used for roadway safety analysis should include the effects of combined cornering and braking. The point-mass model typically used by highway design professionals may not be appropriate to predict vehicle behavior on high-speed curves during braking in low-friction situations. However, engineers can use the results of this study to help select the appropriate vehicle dynamic

Recovery act : states' use of highway infrastructure funds and compliance with the act's requirements.

Science.gov (United States)

2009-01-01

The American Recovery and Reinvestment Act of 2009 (Recovery Act) included more than $48 billion for the Department of Transportations (DOT) investment in transportation infrastructure, including highways, rail, and transit. This testimonybased...

Highway Performance Monitoring System (HPMS) (National)

Data.gov (United States)

Department of Transportation — The Federal Highway Administration (FHWA) has the responsibility to assure that adequate highway transportation information is available to support its functions and...

40 CFR 86.419-2006 - Engine displacement, motorcycle classes.

Science.gov (United States)

2010-07-01

... reference in § 86.1). (2) For rotary engines, displacement means the maximum volume of a combustion chamber... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Engine displacement, motorcycle... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES...

23 CFR 500.104 - State option.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false State option. 500.104 Section 500.104 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION TRANSPORTATION INFRASTRUCTURE MANAGEMENT MANAGEMENT AND MONITORING SYSTEMS Management Systems § 500.104 State option. Except as specified in § 500.105 (a...

Off-Highway Gasoline Consuption Estimation Models Used in the Federal Highway Administration Attribution Process: 2008 Updates

Energy Technology Data Exchange (ETDEWEB)

Hwang, Ho-Ling [ORNL; Davis, Stacy Cagle [ORNL

2009-12-01

This report is designed to document the analysis process and estimation models currently used by the Federal Highway Administration (FHWA) to estimate the off-highway gasoline consumption and public sector fuel consumption. An overview of the entire FHWA attribution process is provided along with specifics related to the latest update (2008) on the Off-Highway Gasoline Use Model and the Public Use of Gasoline Model. The Off-Highway Gasoline Use Model is made up of five individual modules, one for each of the off-highway categories: agricultural, industrial and commercial, construction, aviation, and marine. This 2008 update of the off-highway models was the second major update (the first model update was conducted during 2002-2003) after they were originally developed in mid-1990. The agricultural model methodology, specifically, underwent a significant revision because of changes in data availability since 2003. Some revision to the model was necessary due to removal of certain data elements used in the original estimation method. The revised agricultural model also made use of some newly available information, published by the data source agency in recent years. The other model methodologies were not drastically changed, though many data elements were updated to improve the accuracy of these models. Note that components in the Public Use of Gasoline Model were not updated in 2008. A major challenge in updating estimation methods applied by the public-use model is that they would have to rely on significant new data collection efforts. In addition, due to resource limitation, several components of the models (both off-highway and public-us models) that utilized regression modeling approaches were not recalibrated under the 2008 study. An investigation of the Environmental Protection Agency's NONROAD2005 model was also carried out under the 2008 model update. Results generated from the NONROAD2005 model were analyzed, examined, and compared, to the extent that

Quantum state transfer and network engineering

International Nuclear Information System (INIS)

Nikolopoulos, Georgios M.; Jex, Igor

2014-01-01

Presents the basics of large-scale quantum information processing and networking. Covers most aspects of the problems of state transfer and quantum network engineering. Reflects the interdisciplinary nature of the field. Presents various theoretical approaches as well as possible implementations and related experiments. Faithful communication is a necessary precondition for large-scale quantum information processing and networking, irrespective of the physical platform. Thus, the problems of quantum-state transfer and quantum-network engineering have attracted enormous interest over the last years, and constitute one of the most active areas of research in quantum information processing. The present volume introduces the reader to fundamental concepts and various aspects of this exciting research area, including links to other related areas and problems. The implementation of state-transfer schemes and the engineering of quantum networks are discussed in the framework of various quantum optical and condensed matter systems, emphasizing the interdisciplinary character of the research area. Each chapter is a review of theoretical or experimental achievements on a particular topic, written by leading scientists in the field. The volume aims at both newcomers as well as experienced researchers.

Geometric Design of Highways in USA

Directory of Open Access Journals (Sweden)

Hrvoje Baričević

2012-10-01

Full Text Available This paper describes the criteria, standards, and engineeringprocedures used to design principal elements of the highwayalignment, highway cross sections, and adjacent roadside environment.Development of a comprehensive highway design focuseson the establishment of travel lane configuration, alignmentlocation, and all dimensions related to the highway crosssection. A three-dimensional physical location is determinedthrough calculation of a horizontal and vertical alignment ofthe highway centerline, based on a variety of operational considerations.The results of these activities are refe"ed to as thegeometric design and represent all the visible features of a highwayor street. The first and major portion of the paper deals withthe design of motor-vehicle facilities. Specific design elementsare described and discussed with respect to design methodology.

40 CFR 86.336-79 - Diesel engine test cycle.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Diesel engine test cycle. 86.336-79... Diesel engine test cycle. (a) The following 13-mode cycle shall be followed in dynamometer operation... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES Emission Regulations for...

Guidelines for selecting preferred highway routes for highway-route-controlled quantity shipments of radioactive materials

International Nuclear Information System (INIS)

1989-01-01

The document presents guidelines for use by State officials in selecting preferred routes for highway route controlled quantity shipments of radioactive materials. A methodology for analyzing and comparing safety factors of alternative routes is described. Technical information on the impacts of radioactive material transportation needed to apply the methodology is also presented. Application of the methodology will identify the route (or set of routes) that minimizes the radiological impacts from shipments of these radioactive materials within a given State. Emphasis in the document is on practical application of the methodology. Some details of the derivation of the methods and data are presented in the appendices. All references in the body of the report can be found listed in the Bibliography (Appendix F)

Controllable gaussian-qubit interface for extremal quantum state engineering.

Science.gov (United States)

Adesso, Gerardo; Campbell, Steve; Illuminati, Fabrizio; Paternostro, Mauro

2010-06-18

We study state engineering through bilinear interactions between two remote qubits and two-mode gaussian light fields. The attainable two-qubit states span the entire physically allowed region in the entanglement-versus-global-purity plane. Two-mode gaussian states with maximal entanglement at fixed global and marginal entropies produce maximally entangled two-qubit states in the corresponding entropic diagram. We show that a small set of parameters characterizing extremally entangled two-mode gaussian states is sufficient to control the engineering of extremally entangled two-qubit states, which can be realized in realistic matter-light scenarios.

Computational Intelligence in Highway Management: A Review

Directory of Open Access Journals (Sweden)

Ondrej Pribyl

2015-10-01

Full Text Available Highway management systems are used to improve safety and driving comfort on highways by using control strategies and providing information and warnings to drivers. They use several strategies starting from speed and lane management, through incident detection and warning systems, ramp metering, weather information up to, for example, informing drivers about alternative roads. This paper provides a review of the existing approaches to highway management systems, particularly speed harmonization and ramp metering. It is focused only on modern and advanced approaches, such as soft computing, multi-agent methods and their interconnection. Its objective is to provide guidance in the wide field of highway management and to point out the most relevant recent activities which demonstrate that development in the field of highway management is still important and that the existing research exhibits potential for further enhancement.

Geographic Information for Analysis of Highway Runoff-Quality Data on a National or Regional Scale in the Conterminous United States

Science.gov (United States)

Smieszek, Tomas W.; Granato, Gregory E.

2000-01-01

Spatial data are important for interpretation of water-quality information on a regional or national scale. Geographic information systems (GIS) facilitate interpretation and integration of spatial data. The geographic information and data compiled for the conterminous United States during the National Highway Runoff Water-Quality Data and Methodology Synthesis project is described in this document, which also includes information on the structure, file types, and the geographic information in the data files. This 'geodata' directory contains two subdirectories, labeled 'gisdata' and 'gisimage.' The 'gisdata' directory contains ArcInfo coverages, ArcInfo export files, shapefiles (used in ArcView), Spatial Data Transfer Standard Topological Vector Profile format files, and meta files in subdirectories organized by file type. The 'gisimage' directory contains the GIS data in common image-file formats. The spatial geodata includes two rain-zone region maps and a map of national ecosystems originally published by the U.S. Environmental Protection Agency; regional estimates of mean annual streamflow, and water hardness published by the Federal Highway Administration; and mean monthly temperature, mean annual precipitation, and mean monthly snowfall modified from data published by the National Climatic Data Center and made available to the public by the Oregon Climate Service at Oregon State University. These GIS files were compiled for qualitative spatial analysis of available data on a national and(or) regional scale and therefore should be considered as qualitative representations, not precise geographic location information.

Cost estimate modeling of transportation management plans for highway projects : [research brief].

Science.gov (United States)

2012-05-01

Highway rehabilitation and reconstruction projects frequently cause road congestion and increase safety concerns while limiting access for road users. State Transportation Agencies (STAs) are challenged to find safer and more efficient ways to renew ...

Surface radiological investigations along State Highway 95, Lagoon Road, and Melton Valley Drive, Oak Ridge Reservation, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Tiner, P.F.; Uziel, M.S.; Rice, D.E.; Williams, J.K.

1995-08-01

The surface radiological investigation along State Highway 95, Lagoon Road, and Melton Valley Drive at the Oak Ridge Reservation was conducted as part of the Oak Ridge National Laboratory Environmental Restoration Program Surveillance and Maintenance activities. This report was prepared to document results of the investigation and subsequent remedial actions. The report details surface gamma radiation levels including gamma anomalies; surface beta radiation levels including beta anomalies; results of analysis of soil, water, and vegetation samples and smear samples collected from paved surfaces; remediation activities conducted as a result of the survey; and recommendations for further corrective measures

Updating a Strategic Highway Safety Plan : Learning from the Idaho Transportation Department (ITD) - Proceedings from the Federal Highway Administration's (FHWA) Highway Safety Peer-to-Peer Exchange Program

Science.gov (United States)

2009-10-01

On November 4, 2009, ITDs Office of Highway Operations and Safety partnered with the FHWA Office of Safety to host a one-day peer exchange. This event focused on the update of Idahos Strategic Highway Safety Plan (SHSP), entitled Toward Zero...

Marine spark-ignition engine and off-road recreational vehicle emission regulations : discussion document

International Nuclear Information System (INIS)

2004-07-01

In February 2001, the Minister of Environment Canada outlined a series of measures to reduce emissions from vehicles and engines, including off-road engines. This report describes proposed regulations to control emissions form outboard engines, personal watercraft engines, snowmobiles, off-highway motorcycles, all-terrain vehicles and utility vehicles. Since most marine engines and recreational vehicles sold in Canada are imported, the agenda includes the development of new regulations under Division 5 of the Canadian Environmental Protection Act (CEPA) to align Canada's emission standards for off-road vehicles with those of the United States Environmental Protection Agency. A harmonized approach on emissions standards is expected to result in fewer transition and implementation problems. This report describes which vehicles and engines will be subjected to the planned regulations along with those that will be exempted. Planned emission standard swill apply to vehicles and engines of the 2007 and later model years. Persons affected by the planned regulations were also identified. tabs., figs

Exhaust Aftertreatment and Low Pressure Loop EGR Applied to an Off-Highway Engine

Energy Technology Data Exchange (ETDEWEB)

Baumgard, Kirby; Triana, Antonio; Johnson, John; Yang, Song; Premchand, Kiran

2006-01-30

The goal of the project was to demonstrate that low pressure loop EGR incorporating a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF) can be applied to an off-highway engine to meet Tier 3 (Task I) and Interim Tier 4 (Task II) off-road emissions standards. Task I data was collected using a John Deere 8.1 liter engine modified with a low pressure loop EGR system. The engine and EGR system was optimized and final data over the ISO 8178 eight mode test indicated the NOx emissions were less than 4 g/kWh and the PM was less than 0.02 g/kWh which means the engine met the Tier 3 off-road standard. Considerable experimental data was collected and used by Michigan Tech University to develop and calibrate the MTU-Filter 1D DPF model. The MTU-Filter 1D DPF code predicts the particulate mass evolution (deposition and oxidation) in the diesel particulate filter (DPF) during simultaneous loading and during thermal and NO{sub 2}-assisted regeneration conditions. It also predicts the pressure drop across the DPF, the flow and temperature fields, the solid filtration efficiency and the particle number distribution downstream of the DPF. A DOC model was also used to predict the NO{sub 2} upstream of the DPF. The DPF model was calibrated to the experimental data at temperatures from 230 C to 550 C, and volumetric flow rates from 9 to 39 actual m{sup 3}/min. Model predictions of the solid particulate mass deposited in the DPF after each loading and regeneration case were in agreement within +/-10g (or +/-10%) of experimental measurements at the majority of the engine operating conditions. The activation temperatures obtained from the model calibration are in good agreement with values reported in the literature and gave good results in the model calibration by using constant pre-exponential factors throughout the entire range of conditions evaluated. The average clean filter permeability was 2.372 x 10{sup -13} m{sup 2}. Estimates of the solid particulate mass

Current Situation of Highway Daily Maintenance Management in Beijing

Directory of Open Access Journals (Sweden)

Pan Feng Ming

2016-01-01

Full Text Available Combined with the industry property, characteristics and management needs of highway maintenance project in Beijing, through investigation and research of the highway daily maintenance management, the present situation of highway repair and maintenance is expounded from the aspects such as the determination of maintenance funds and plan, maintenance management mode, and so on. Then in order to explore the new mechanisms for market management of highway maintenance, the advantages and disadvantages of highway maintenance and minor repairment of Beijing are analyzed.

23 CFR 470.107 - Federal-aid highway systems.

Science.gov (United States)

2010-04-01

... Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH HIGHWAY SYSTEMS... industrial centers, including important routes into, through, and around urban areas, serve the national... importance in Canada and Mexico. (2) The portion of the Interstate System designated under 23 U.S.C. 103 (e...

75 FR 1114 - Notice of Final Federal Agency Actions on Proposed Highway in California

Science.gov (United States)

2010-01-08

... improve the safety of State Route 16 between the town of Brooks and Interstate 505 in Yolo County by... relate to a proposed highway project, State Route 16 between the town of Brooks and Interstate 505 in the County Yolo, State of California. Those actions grant licenses, permits, and approvals for the project...

Sustainable Waste Management for Green Highway Initiatives

Directory of Open Access Journals (Sweden)

Husin Nur Illiana

2016-01-01

Full Text Available Green highway initiative is the transportation corridors based on sustainable concept of roadway. It incorporates both transportation functionality and ecological requirements. Green highway also provides more sustainable construction technique that maximizes the lifespan of highway. Waste management is one of the sustainable criterias in the elements of green highway. Construction of highway consumes enormous amounts of waste in term of materials and energy. These wastes need to be reduce to sustain the environment. This paper aims to identify the types of waste produced from highway construction. Additionally, this study also determine the waste minimization strategy and waste management practiced.. This study main focus are construction and demolition waste only. The methodology process begin with data collection by using questionnaire survey. 22 concession companies listed under Lembaga Lebuhraya Malaysia acted as a respondent. The questionnaires were distributed to all technical department staffs. The data received was analyzed using IBM SPSS. The results shows the most production of waste is wood, soil, tree root and concrete. The least production of waste is metal. For waste minimization, the best waste minimization is reuse for all type of waste except for tree root and stump. Whereas, the best waste management is providing strategic plan. The least practice for waste management is recording the quantity of waste.

Trend and concentrations of legacy lead (Pb) in highway runoff

International Nuclear Information System (INIS)

Kayhanian, Masoud

2012-01-01

This study presents the results of lead (Pb) concentrations from both highway runoff and contaminated soil along 32 and 23 highway sites, respectively. In general, the Pb concentration on topsoil (0–15 cm) along highways was much higher than the Pb concentration in subsurface soil (15–60 cm). The Pb deposited on soil appears to be anthropogenic and a strong correlation was found between the Pb concentration in surface soil and highway runoff in urban areas. The concentration of Pb measured during 1980s from highways runoff throughout the world was up to 11 times higher than the measured values in mid 1990s and 2000s. The current Pb deposited on soil near highways appears to be a mixture of paint, tire weight balance and old leaded gasoline combustion. Overall, the Pb phase-out regulation reduced the Pb deposits in the environment and consequently lowered Pb loading into receiving waters. - Highlights: ► Pb concentrations in highway runoff ranged from 0.5 to 752 mg/L. ► 78% of total lead concentration in highway runoff was in particulate form. ► Pb deposited on highway sites was mostly within 0 to 15 cm of soil column. ► Pb concentration in highway runoff and top soil was strongly correlated. ► Current Pb concentration in highway runoff is up to 11 times lower than late 1980s. - Most Pb deposited on soil near highways is within the top 15 cm. This Pb is the major sources of Pb concentration in highway runoff that has substantially been reduced since lead phase-out era.

Highways and outposts: economic development and health threats in the central Brazilian Amazon region.

Science.gov (United States)

Barcellos, Christovam; Feitosa, Patrícia; Damacena, Giseli N; Andreazzi, Marco A

2010-06-17

Economic development is often evoked as a driving force that has the capacity to improve the social and health conditions of remote areas. However, development projects produce uneven impacts on local communities, according to their different positions within society. This study examines the spatial distribution of three major health threats in the Brazilian Amazon region that may undergo changes through highway construction. Homicide mortality, AIDS incidence and malaria prevalence rates were calculated for 70 municipalities located within the areas of influence of the Cuiabá-Santarém highway (BR-163), i.e. in the western part of the state of Pará state and the northern part of Mato Grosso. The municipalities were characterized using social and economic indicators such as gross domestic product (GDP), urban and indigenous populations, and recent migration. The municipalities' connections to the region's main transportation routes (BR-163 and Trans-Amazonian highways, along with the Amazon and Tapajós rivers) were identified by tagging the municipalities that have boundaries crossing these routes, using GIS overlay operations. Multiple regression was used to identify the major driving forces and constraints relating to the distribution of health threats. The main explanatory variables for higher malaria prevalence were: proximity to the Trans-Amazonian highway, high proportion of indigenous population and low proportion of migrants. High homicide rates were associated with high proportions of migrants, while connection to the Amazon River played a protective role. AIDS incidence was higher in municipalities with recent increases in GDP and high proportions of urban population. Highways induce social and environmental changes and play different roles in spreading and maintaining diseases and health threats. The most remote areas are still protected against violence but are vulnerable to malaria. Rapid economic and demographic growth increases the risk of AIDS

Highways and outposts: economic development and health threats in the central Brazilian Amazon region

Directory of Open Access Journals (Sweden)

Damacena Giseli N

2010-06-01

Full Text Available Abstract Background Economic development is often evoked as a driving force that has the capacity to improve the social and health conditions of remote areas. However, development projects produce uneven impacts on local communities, according to their different positions within society. This study examines the spatial distribution of three major health threats in the Brazilian Amazon region that may undergo changes through highway construction. Homicide mortality, AIDS incidence and malaria prevalence rates were calculated for 70 municipalities located within the areas of influence of the Cuiabá-Santarém highway (BR-163, i.e. in the western part of the state of Pará state and the northern part of Mato Grosso. Results The municipalities were characterized using social and economic indicators such as gross domestic product (GDP, urban and indigenous populations, and recent migration. The municipalities' connections to the region's main transportation routes (BR-163 and Trans-Amazonian highways, along with the Amazon and Tapajós rivers were identified by tagging the municipalities that have boundaries crossing these routes, using GIS overlay operations. Multiple regression was used to identify the major driving forces and constraints relating to the distribution of health threats. The main explanatory variables for higher malaria prevalence were: proximity to the Trans-Amazonian highway, high proportion of indigenous population and low proportion of migrants. High homicide rates were associated with high proportions of migrants, while connection to the Amazon River played a protective role. AIDS incidence was higher in municipalities with recent increases in GDP and high proportions of urban population. Conclusions Highways induce social and environmental changes and play different roles in spreading and maintaining diseases and health threats. The most remote areas are still protected against violence but are vulnerable to malaria. Rapid

23 CFR 710.507 - State and local contributions.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false State and local contributions. 710.507 Section 710.507 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RIGHT-OF-WAY AND ENVIRONMENT RIGHT-OF-WAY AND REAL ESTATE Property Acquisition Alternatives § 710.507 State and local contributions. (a...

An Integrated Neuroscience and Engineering Approach to Classifying Human Brain-States

Science.gov (United States)

2015-12-22

AFRL-AFOSR-VA-TR-2016-0037 An Integrated Neuroscience and Engineering Approach to Classifying Human Brain-States Adrian Lee UNIVERSITY OF WASHINGTON...to 14-09-2015 4. TITLE AND SUBTITLE An Integrated Neuroscience and Engineering Approach to Classifying Human Brain- States 5a.  CONTRACT NUMBER 5b...specific cognitive states remains elusive, owing perhaps to limited crosstalk between the fields of neuroscience and engineering. Here, we report a

Trends in the highway market for wood products

Science.gov (United States)

Robert G. Knutson

1975-01-01

Forty-eight million cubic feet of wood products, about 50 million dollars worth, were used in the Nation's highway construction program in 1972. Expenditures for highway construction increased 2½ times from 1954 to 1972. The volume of wood products used in highway construction changed little during this period because other materials were substituted for...

Quality of stormwater runoff discharged from Massachusetts highways, 2005-07

Science.gov (United States)

Smith, Kirk P.; Granato, Gregory E.

2010-01-01

The U.S. Geological Survey (USGS), in cooperation with U.S. Department of Transportation Federal Highway Administration and the Massachusetts Department of Transportation, conducted a field study from September 2005 through September 2007 to characterize the quality of highway runoff for a wide range of constituents. The highways studied had annual average daily traffic (AADT) volumes from about 3,000 to more than 190,000 vehicles per day. Highway-monitoring stations were installed at 12 locations in Massachusetts on 8 highways. The 12 monitoring stations were subdivided into 4 primary, 4 secondary, and 4 test stations. Each site contained a 100-percent impervious drainage area that included two or more catch basins sharing a common outflow pipe. Paired primary and secondary stations were located within a few miles of each other on a limited-access section of the same highway. Most of the data were collected at the primary and secondary stations, which were located on four principal highways (Route 119, Route 2, Interstate 495, and Interstate 95). The secondary stations were operated simultaneously with the primary stations for at least a year. Data from the four test stations (Route 8, Interstate 195, Interstate 190, and Interstate 93) were used to determine the transferability of the data collected from the principal highways to other highways characterized by different construction techniques, land use, and geography. Automatic-monitoring techniques were used to collect composite samples of highway runoff and make continuous measurements of several physical characteristics. Flowweighted samples of highway runoff were collected automatically during approximately 140 rain and mixed rain, sleet, and snowstorms. These samples were analyzed for physical characteristics and concentrations of 6 dissolved major ions, total nutrients, 8 total-recoverable metals, suspended sediment, and 85 semivolatile organic compounds (SVOCs), which include priority polyaromatic

Nuclear engineering education in the United States

International Nuclear Information System (INIS)

Williamson, T.G.

1982-01-01

In discussing nuclear engineering education in the United States it is shown that the most critical issue facing the nuclear engineering education community today is enrolment in a time of increasing demand for graduate engineers. Related to the issue of enrolment is support for graduate students, whether it be fellowships, traineeships, or research assistantships. Other issues are those of maintaining a vital faculty in the face of a competitive job market, of maintaining research facilities and developing new ones, and of determining the directions of educational efforts in the future. (U.K.)

State analysis requirements database for engineering complex embedded systems

Science.gov (United States)

Bennett, Matthew B.; Rasmussen, Robert D.; Ingham, Michel D.

2004-01-01

It has become clear that spacecraft system complexity is reaching a threshold where customary methods of control are no longer affordable or sufficiently reliable. At the heart of this problem are the conventional approaches to systems and software engineering based on subsystem-level functional decomposition, which fail to scale in the tangled web of interactions typically encountered in complex spacecraft designs. Furthermore, there is a fundamental gap between the requirements on software specified by systems engineers and the implementation of these requirements by software engineers. Software engineers must perform the translation of requirements into software code, hoping to accurately capture the systems engineer's understanding of the system behavior, which is not always explicitly specified. This gap opens up the possibility for misinterpretation of the systems engineer's intent, potentially leading to software errors. This problem is addressed by a systems engineering tool called the State Analysis Database, which provides a tool for capturing system and software requirements in the form of explicit models. This paper describes how requirements for complex aerospace systems can be developed using the State Analysis Database.

77 FR 65840 - Section 610 Reviews of Heavy-Duty Engine and Vehicle Standards and Highway Diesel Fuel Sulfur...

Science.gov (United States)

2012-10-31

... Standards and Highway Diesel Fuel Sulfur Control Requirements, please contact Tad Wysor, Office of... address: wysor.tad@epa.gov . If you have questions concerning EPA's 610 Review related to NESHAP...

OML-Highway within the framework of SELMAGIS. Final report

Energy Technology Data Exchange (ETDEWEB)

Solvang Jensen, S.; Becker, T.; Ketzel, M.; Loefstroem, P.; Roerdam Olesen, H. (Aarhus Univ., National Environmental Research Institute, Dept. of Atmospheric Environment (Denmark)); Lorentz, H. (Ingenieurbuero Lohmeyer (Germany))

2010-06-15

This report describes the OML-Highway model and its integration into SELMAGIS. The National Environmental Research Institute (NERI) has developed the OML-Highway model and Ingenieurbuero Lohmeyer from Germany has developed SELMAGIS. The OML-Highway model is able to calculate air pollution concentration levels at receptor points along a highway road network, while SELMAGIS is a framework for calculating and representing air pollutant emissions and concentrations in a geographical information system (GIS). (author)

Highway-rail intersection GPS-based in-vehicle warning systems - literature review and recommendations.

Science.gov (United States)

2012-12-31

In 2008, there were 2,395 incidents at highway-rail intersections (level crossings) in the United States, resulting in 939 injuries and 287 fatalities. Crossing elimination, grade separation, and the implementation of traditional warning devices are ...

Soft Budgets And Highway Franchising

OpenAIRE

Eduardo Engel; Ronald Fischer; Alexander Galetovic

2004-01-01

Latin American governments progressively substituted build–operate–and–transfer (BOT) contracts for government–provided highways during the nineties. Because under BOT a private franchise holder finances and operates the road in exchange for tolls, it is often claimed that BOT represents a privatization of highways. We argue that, as currently applied, the BOT model is an imperfect and incomplete privatization, because the franchise holders’ budget constraint has been soft, with losses being ...

Explaining residential moving intentions : the case of highway locations

NARCIS (Netherlands)

Hamersma, Marije; Heinen, Eva; Tillema, Taede; Arts, Jos

2013-01-01

In this paper Structural Equation Modeling is used to test a theoretical framework to explain the impact of highway externalities (i.e. accessibility and nuisance) on moving intentions of people living close to highways. We aimed to study whether highway externalities (alongside other contextual

23 CFR 660.509 - General principles.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false General principles. 660.509 Section 660.509 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS SPECIAL PROGRAMS (DIRECT FEDERAL) Defense Access Roads § 660.509 General principles. (a) State and local highway...

Canada's gas taxes = highway robbery

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-05-01

This report was prepared for the second annual 'gas honesty day' (May 18, 2000) in an effort to draw attention to the frustration of Canadian taxpayers with gasoline retailers and the petroleum industry for the inordinately and unjustifiably high prices for gasoline at the pump. The report points out that the public outcry is, in fact, misdirected since the largest profiteers at the pumps, the federal government, remains largely unscathed. It is alleged in the report that gas taxes are tantamount to highway robbery. Ostensibly collected for road construction and maintenance, of the almost $ 5 billion collected in 1999, only a paltry $ 194 million was returned to the provinces for roadway and highway spending. The 10-year average of federal returns to the the provinces from tax on gasoline is a meager 4.7 per cent, which fell even further to 4.1 per cent in 1998-1999. Gasoline tax revenues continue to climb, while government commitment to real roadway and highway spending continues to decline. This document attempts to shed some light on the pricing structure for gasoline. Without defending or explaining the non-tax portion of the pump price charged by Canada's oil companies, which is a task for the oil companies to undertake, the document makes a concerted effort to raise public awareness and focus public attention on government's involvement, namely that gas taxes represent on average about 50 per cent of the pump price and that the majority of the taxes collected are not put back into road and highway improvements. The Canadian Taxpayers Federation, authors of this report, expect that by focusing debate on the issue of gasoline taxes a broad support for a lowering of the overall tax burden on motorists will result. Among other things, the CTF advocates reduction of federal and provincial fuel taxes to levels commensurate with highway funding; dedication of fuel tax revenues to highway construction and maintenance; elimination of the sales and goods

The ELETTRA field highway system

International Nuclear Information System (INIS)

Bulfone, D.; Michelini, P.; Mignacco, M.

1992-01-01

ELETTRA is a third generation Synchrotron Light Source under construction in Trieste (Italy); it consists of a full energy linac injector and a storage ring with beam energies between 1.5 and 2 GeV. The ELETTRA control system has a distributed architecture, hierarchically divided into three layers of computers; two network levels provide communication between the adjacent computer layers. The field highway adopted for the connection of the middle-layer local process computers with the bottom-layer equipment interface units is the MIL-1553B multidrop highway. This paper describes the hardware configuration and the main communication services developed on the MIL-1553B field highway for accelerator control. As an additional feature, typical LAN utilities have been added on top of the basic MIL-1553B communication software allowing remote logic and file transfer; these tools are currently used for software development in our laboratory. (author)

Optimize pollutant emissions through adaptive highway management.

Science.gov (United States)

2011-09-01

In this project, we investigated the possibility to reduce green house emission : (mainly CO2) from urban highways by adaptive ramp meter control. QUADSTONE : PARAMICS software was used to build a microscopic traffic model for a 4-lane highway : sect...

The Application Study in Solar Energy Technology for Highway Service Area: A Case Study of West Lushan Highway Low-Carbon Service Area in China

Directory of Open Access Journals (Sweden)

Xiaochun Qin

2015-01-01

Full Text Available A lot of research works have been made concerning highway service area or solar technology and acquired great achievements. However, unfortunately, few works have been made combining the two topics together of highway service areas and solar energy saving to make a systemic research on solar technology application for highway service area. In this paper, taking West Lushan highway low-carbon service area in Jiangxi Province of China as the case study, the advantages, technical principles, and application methods of solar energy technology for highway service area including solar photoelectric technology and solar water heating technology were discussed based on the analysis of characteristics of highway low-carbon service area; the system types, operation mode, and installing tilt angle of the two kinds of solar systems suitable for highway service areas were confirmed. It was proved that the reduction of the cost by electricity savings of solar system was huge. Taking the investment of the solar systems into account, the payback period of solar photoelectric systems and solar water heating systems was calculated. The economic effect of the solar systems in West Lushan highway service area during the effective operation periods was also calculated and proved very considerable.

Wireless monitoring of highways

Science.gov (United States)

Bennett, Richard; Hayes-Gill, Barrie; Crowe, John A.; Armitage, Robert; Rodgers, Dale; Hendroff, Adrian

1999-05-01

Electronic hardware has been developed to telemetrically transmit temperature and strain measurements from within a public highway in the UK. These measurements provide an important health check for monitoring fatigue damage in pavements. Previous attempts at measuring strain and temperature have required lengths of cable to be installed in the highway. The installation of these cables is both expensive and damaging to the pavement and provides potentially unreliable electrical connections. The new systems consist of a retrofitted instrumented asphalt core which is bonded into the pavement structure. The core contains all the electronics necessary to record two temperatures and two strains. An analogue front end provides signal conditioning which is digitized and passed to microcontroller for endcoding. From there the data is transmitted via a low power radio link to a receiver and data logger positioned by the side of the road. The system has an in-situ operating life of 6 months on AA alkaline batteries. Results are presented of power management and fault tolerant radio protocol techniques, long term temperature variations, dynamic strain measurements within the highway, and RF transmission capabilities through a layer of asphalt.

Fatigue analysis and life prediction of composite highway bridge decks under traffic loading

Directory of Open Access Journals (Sweden)

Fernando N. Leitão

Full Text Available Steel and composite (steel-concrete highway bridges are currently subjected to dynamic actions of variable magnitude due to convoy of vehicles crossing on the deck pavement. These dynamic actions can generate the nucleation of fractures or even their propagation on the bridge deck structure. Proper consideration of all of the aspects mentioned pointed our team to develop an analysis methodology with emphasis to evaluate the stresses through a dynamic analysis of highway bridge decks including the action of vehicles. The design codes recommend the application of the curves S-N associated to the Miner's damage rule to evaluate the fatigue and service life of steel and composite (steel-concrete bridges. In this work, the developed computational model adopted the usual mesh refinement techniques present in finite element method simulations implemented in the ANSYS program. The investigated highway bridge is constituted by four longitudinal composite girders and a concrete deck, spanning 40.0m by 13.5m. The analysis methodology and procedures presented in the design codes were applied to evaluate the fatigue of the bridge determining the service life of the structure. The main conclusions of this investigation focused on alerting structural engineers to the possible distortions, associated to the steel and composite bridge's service life when subjected to vehicle's dynamic actions.

Safety early warning research for highway construction based on case-based reasoning and variable fuzzy sets.

Science.gov (United States)

Liu, Yan; Yi, Ting-Hua; Xu, Zhen-Jun

2013-01-01

As a high-risk subindustry involved in construction projects, highway construction safety has experienced major developments in the past 20 years, mainly due to the lack of safe early warnings in Chinese construction projects. By combining the current state of early warning technology with the requirements of the State Administration of Work Safety and using case-based reasoning (CBR), this paper expounds on the concept and flow of highway construction safety early warnings based on CBR. The present study provides solutions to three key issues, index selection, accident cause association analysis, and warning degree forecasting implementation, through the use of association rule mining, support vector machine classifiers, and variable fuzzy qualitative and quantitative change criterion modes, which fully cover the needs of safe early warning systems. Using a detailed description of the principles and advantages of each method and by proving the methods' effectiveness and ability to act together in safe early warning applications, effective means and intelligent technology for a safe highway construction early warning system are established.

Safety Early Warning Research for Highway Construction Based on Case-Based Reasoning and Variable Fuzzy Sets

Directory of Open Access Journals (Sweden)

Yan Liu

2013-01-01

Full Text Available As a high-risk subindustry involved in construction projects, highway construction safety has experienced major developments in the past 20 years, mainly due to the lack of safe early warnings in Chinese construction projects. By combining the current state of early warning technology with the requirements of the State Administration of Work Safety and using case-based reasoning (CBR, this paper expounds on the concept and flow of highway construction safety early warnings based on CBR. The present study provides solutions to three key issues, index selection, accident cause association analysis, and warning degree forecasting implementation, through the use of association rule mining, support vector machine classifiers, and variable fuzzy qualitative and quantitative change criterion modes, which fully cover the needs of safe early warning systems. Using a detailed description of the principles and advantages of each method and by proving the methods’ effectiveness and ability to act together in safe early warning applications, effective means and intelligent technology for a safe highway construction early warning system are established.

The Application Study in Solar Energy Technology for Highway Service Area: A Case Study of West Lushan Highway Low-Carbon Service Area in China

OpenAIRE

Qin, Xiaochun; Shen, Yi; Shao, Shegang

2015-01-01

A lot of research works have been made concerning highway service area or solar technology and acquired great achievements. However, unfortunately, few works have been made combining the two topics together of highway service areas and solar energy saving to make a systemic research on solar technology application for highway service area. In this paper, taking West Lushan highway low-carbon service area in Jiangxi Province of China as the case study, the advantages, technical principles, and...

26 CFR 48.6427-0 - Off-highway business use.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Off-highway business use. 48.6427-0 Section 48... Special Application to Retailers and Manufacturers Taxes § 48.6427-0 Off-highway business use. For purposes of the regulations under section 6427, after March 31, 1983, the term “off-highway business use...

26 CFR 48.6421-0 - Off-highway business use.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Off-highway business use. 48.6421-0 Section 48... Special Application to Retailers and Manufacturers Taxes § 48.6421-0 Off-highway business use. For purposes of the regulations under section 6421, after March 31, 1983, the term “off-highway business use...

Highway travel time estimation with data fusion

CERN Document Server

Soriguera Martí, Francesc

2016-01-01

This monograph presents a simple, innovative approach for the measurement and short-term prediction of highway travel times based on the fusion of inductive loop detector and toll ticket data. The methodology is generic and not technologically captive, allowing it to be easily generalized for other equivalent types of data. The book shows how Bayesian analysis can be used to obtain fused estimates that are more reliable than the original inputs, overcoming some of the drawbacks of travel-time estimations based on unique data sources. The developed methodology adds value and obtains the maximum (in terms of travel time estimation) from the available data, without recurrent and costly requirements for additional data. The application of the algorithms to empirical testing in the AP-7 toll highway in Barcelona proves that it is possible to develop an accurate real-time, travel-time information system on closed-toll highways with the existing surveillance equipment, suggesting that highway operators might provide...

Force-based and displacement-based reliability assessment approaches for highway bridges under multiple hazard actions

Directory of Open Access Journals (Sweden)

Chao Huang

2015-08-01

Full Text Available The strength limit state of American Association of State Highway and Transportation Officials (AASHTO Load and Resistance Factor Design (LRFD Bridge Design Specifications is developed based on the failure probabilities of the combination of non-extreme loads. The proposed design limit state equation (DLSE has been fully calibrated for dead load and live load by using the reliability-based approach. On the other hand, most of DLSEs in other limit states, including the extreme events Ⅰ and Ⅱ, have not been developed and calibrated though taking certain probability-based concepts into account. This paper presents an assessment procedure of highway bridge reliabilities under the limit state of extreme event Ⅰ, i. e., the combination of dead load, live load and earthquake load. A force-based approach and a displacement-based approach are proposed and implemented on a set of nine simplified bridge models. Results show that the displacement-based approach comes up with more convergent and accurate reliabilities for selected models, which can be applied to other hazards.

Characteristics of heavy metal pollution on roadside soil along highway

Science.gov (United States)

Zheng, Chaocheng

2017-10-01

Highway traffic is the main source of heavy metal pollution. Due to limited cropland, it is very common to plant crops along the highways. So, in view of agricultural products safety, heavy metal pollution by highway traffic to soils along highway is widely concerned. Therefore, to study distribution traits, accumulative laws and influence factors of heavy metals in agricultural soils could provide scientific evidence and theoretical basis for environmental protection along express way.

Air quality and energy impacts of NYSDOT highway ROW management.

Science.gov (United States)

2010-08-01

Mowing the highway right-of-way is important for the safety of roadway users and maintaining the highway infrastructure. However, little quantitative data are available on the energy use and air quality impacts of highway mowing activities. In this r...

40 CFR 86.313-79 - Air flow measurement specifications; diesel engines.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Air flow measurement specifications... Procedures § 86.313-79 Air flow measurement specifications; diesel engines. (a) The air flow measurement... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES...

Results of the radiological survey at 70 State Highway 46, Lodi, New Jersey (LJ094)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.

1989-11-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 70 State Highway 46, Lodi, New Jersey (LJ094), was conducted during 1988. 4 refs., 5 figs., 3 tabs

R2 & NE: NAVTEQ 2011 Q3 Highway Network for the United States, including Puerto Rico and the US Virgin Islands in SDC Format

Data.gov (United States)

U.S. Environmental Protection Agency — The HIGHWAYS layer contains the Highway network, using NAVTEQ Functional Class=1,2,3 which includes major routes between minor cities or towns, and through city...

Photonic Technologies for Ultra-High-Speed Information Highways

DEFF Research Database (Denmark)

Bouchoule, S; Lèfevre, R.; Legros, E.

1999-01-01

The ACTS project HIGHWAY (AC067) addresses promising ultra-high speed optoelectronic components and system technologies for 40 Gbit/s time-division-multiplexed (TDM) transport systems. Advanced 40 Gbit/s TDM system lab demonstrators are to be realized and tested over installed field fiber testbeds....... This paper reviews the current status of 40 Gbit/s TDM components and subsystem technologies achieved in HIGHWAY. The results of HIGHWAY 40 Gbit/s TDM systems and field tests will be reported in a subsequent paper. (C) 1999 Academic Press....

Quantum state transfer and network engineering

CERN Document Server

Nikolopoulos, Georgios M

2013-01-01

Faithful communication is a necessary precondition for large-scale quantum information processing and networking, irrespective of the physical platform. Thus, the problems of quantum-state transfer and quantum-network engineering have attracted enormous interest over the last years, and constitute one of the most active areas of research in quantum information processing. The present volume introduces the reader to fundamental concepts and various aspects of this exciting research area, including links to other related areas and problems. The implementation of state-transfer schemes and the en

An Assessment of Research-Doctorate Programs in the United States: Engineering.

Science.gov (United States)

Jones, Lyle V., Ed.; And Others

The quality of doctoral-level chemical engineering (N=79), civil engineering (N=74), electrical engineering (N=91), and mechanical engineering (N=82) programs at United States universities was assessed, using 16 measures. These measures focused on variables related to: (1) program size; (2) characteristics of graduates; (3) reputational factors…

Induced Polarization Surveying for Acid Rock Screening in Highway Design

Science.gov (United States)

Butler, K. E.; Al, T.; Bishop, T.

2004-05-01

Highway and pipeline construction agencies have become increasingly vigilant in their efforts to avoid cutting through sulphide-bearing bedrock that has potential to produce acid rock drainage. Blasting and fragmentation of such rock increases the surface area available for sulphide oxidation and hence increases the risk of acid rock drainage unless the rock contains enough natural buffering capacity to neutralize the pH. In December, 2001, the New Brunswick Department of Transportation (NBOT) sponsored a field trial of geophysical surveying in order to assess its suitability as a screening tool for locating near-surface sulphides along proposed highway alignments. The goal was to develop a protocol that would allow existing programs of drilling and geochemical testing to be targeted more effectively, and provide design engineers with the information needed to reduce rock cuts where necessary and dispose of blasted material in a responsible fashion. Induced polarization (IP) was chosen as the primary geophysical method given its ability to detect low-grade disseminated mineralization. The survey was conducted in dipole-dipole mode using an exploration-style time domain IP system, dipoles 8 to 25 m in length, and six potential dipoles for each current dipole location (i.e. n = 1 - 6). Supplementary information was provided by resistivity and VLF-EM surveys sensitive to lateral changes in electrical conductivity, and by magnetic field surveying chosen for its sensitivity to the magnetic susceptibility of pyrrhotite. Geological and geochemical analyses of samples taken from several IP anomalies located along 4.3 line-km of proposed highway confirmed the effectiveness of the screening technique. IP pseudosections from a region of metamorphosed shales and volcaniclastic rocks identified discrete, well-defined mineralized zones. Stronger, overlapping, and more laterally extensive IP anomalies were observed over a section of graphitic and sulphide-bearing metasedimentary

25 CFR 170.144 - What are eligible highway safety projects?

Science.gov (United States)

2010-04-01

... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions... management system; (g) Education and outreach highway safety programs, such as use of child safety seats... 25 Indians 1 2010-04-01 2010-04-01 false What are eligible highway safety projects? 170.144...

Trend and concentrations of legacy lead (Pb) in highway runoff.

Science.gov (United States)

Kayhanian, Masoud

2012-01-01

This study presents the results of lead (Pb) concentrations from both highway runoff and contaminated soil along 32 and 23 highway sites, respectively. In general, the Pb concentration on topsoil (0-15 cm) along highways was much higher than the Pb concentration in subsurface soil (15-60 cm). The Pb deposited on soil appears to be anthropogenic and a strong correlation was found between the Pb concentration in surface soil and highway runoff in urban areas. The concentration of Pb measured during 1980s from highways runoff throughout the world was up to 11 times higher than the measured values in mid 1990 s and 2000s. The current Pb deposited on soil near highways appears to be a mixture of paint, tire weight balance and old leaded gasoline combustion. Overall, the Pb phase-out regulation reduced the Pb deposits in the environment and consequently lowered Pb loading into receiving waters. Copyright © 2011 Elsevier Ltd. All rights reserved.

Implementation and effectiveness of sound mitigation measures on Texas highways (HB 790) : final report.

Science.gov (United States)

2016-10-01

The 84th Texas Legislature passed House Bill (HB) 790 directing the Texas A&M Transportation Institute (TTI) to perform a study on the implementation and effectiveness of sound mitigation measures on the state highway system and certain toll roads an...

Real time laser scanning of aggregate materials in highway construction : a transportation pooled fund study.

Science.gov (United States)

2016-12-01

The quality and service life of the roadways that make up the highway transportation infrastructure are dependent upon : the selection and use of high quality aggregate materials. Five state transportation agencies participated in this Transportation...

76 FR 8400 - National Highway Traffic Safety Administration

Science.gov (United States)

2011-02-14

... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration Petition for Exemption From the Vehicle Theft Prevention Standard; Mitsubishi Motors AGENCY: National Highway Traffic Safety Administration (NHTSA) Department of Transportation (DOT). ACTION: Grant of petition for exemption. SUMMARY: This...

Predicting Light-Duty Vehicle Fuel Economy as a Function of Highway Speed

Energy Technology Data Exchange (ETDEWEB)

Thomas, John [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hwang, Ho-Ling [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); West, Brian [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Huff, Shean [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2013-04-08

The www.fueleconomy.gov website offers information such as window label fuel economy for city, highway, and combined driving for all U.S.-legal light-duty vehicles from 1984 to the present. The site is jointly maintained by the U.S. Department of Energy and the U.S. Environmental Protection Agency (EPA), and also offers a considerable amount of consumer information and advice pertaining to vehicle fuel economy and energy related issues. Included with advice pertaining to driving styles and habits is information concerning the trend that as highway cruising speed is increased, fuel economy will degrade. An effort was undertaken to quantify this conventional wisdom through analysis of dynamometer testing results for 74 vehicles at steady state speeds from 50 to 80 mph. Using this experimental data, several simple models were developed to predict individual vehicle fuel economy and its rate of change over the 50-80 mph speed range interval. The models presented require a minimal number of vehicle attributes. The simplest model requires only the EPA window label highway mpg value (based on the EPA specified estimation method for 2008 and beyond). The most complex of these simple model uses vehicle coast-down test coefficients (from testing prescribed by SAE Standard J2263) known as the vehicle Target Coefficients, and the raw fuel economy result from the federal highway test. Statistical comparisons of these models and discussions of their expected usefulness and limitations are offered.

The Information Highway.

Science.gov (United States)

Gore, Al

1994-01-01

The new information marketplace is based on a network of wide, two-way highways comprised of private owners and developers, makers of information appliances (televisions, telephones, computers, and combinations of all three), information providers (local broadcasters, digital libraries, information service providers, and entrepreneurs), and…

Highway traffic simulation on multi-processor computers

Energy Technology Data Exchange (ETDEWEB)

Hanebutte, U.R.; Doss, E.; Tentner, A.M.

1997-04-01

A computer model has been developed to simulate highway traffic for various degrees of automation with a high level of fidelity in regard to driver control and vehicle characteristics. The model simulates vehicle maneuvering in a multi-lane highway traffic system and allows for the use of Intelligent Transportation System (ITS) technologies such as an Automated Intelligent Cruise Control (AICC). The structure of the computer model facilitates the use of parallel computers for the highway traffic simulation, since domain decomposition techniques can be applied in a straight forward fashion. In this model, the highway system (i.e. a network of road links) is divided into multiple regions; each region is controlled by a separate link manager residing on an individual processor. A graphical user interface augments the computer model kv allowing for real-time interactive simulation control and interaction with each individual vehicle and road side infrastructure element on each link. Average speed and traffic volume data is collected at user-specified loop detector locations. Further, as a measure of safety the so- called Time To Collision (TTC) parameter is being recorded.

Cost of Capital Estimation for Highway Concessionaires in Chile

Directory of Open Access Journals (Sweden)

Cristian Vergara-Novoa

2018-01-01

Full Text Available In this paper, we present the cost of capital estimation for highway concessionaires in Chile. We estimated the cost of equity and the cost of debt and determined the capital structure for each one of twenty-four concessionaires that operate highways. We based our estimations on the developments of Sharpe (1964, Modigliani and Miller (1958, and Maquieira (2009, which were also compared with the Brusov et al. (2015 developments. We collected stock prices for different highway concessionaires around the world from Google Finance and Reuters’ websites in order to determine the Beta of equity using a representative company. After that, we estimated the cost of equity considering Hamada (1969 and a Capital Asset Pricing Model. Then, we estimated the cost of capital using the cost of debt and the capital structure of Chile’s highway concessionaires. With all above, we were able to determine the Weighted Average Cost of Capital (WACC for highway concessions which ranges from 5.49 to 6.62%.

Influences of high-flow events on a stream channel altered by construction of a highway bridge: A case study

Science.gov (United States)

Hedrick, Lara B.; Welsh, Stuart A.; Anderson, James T.

2009-01-01

Impacts of highway construction on streams in the central Appalachians are a growing concern as new roads are created to promote tourism and economic development in the area. Alterations to the streambed of a first-order stream, Sauerkraut Run, Hardy County, WV, during construction of a highway overpass included placement and removal of a temporary culvert, straightening and regrading of a section of stream channel, and armourment of a bank with a reinforced gravel berm. We surveyed longitudinal profiles and cross sections in a reference reach and the altered reach of Sauerkraut Run from 2003 through 2007 to measure physical changes in the streambed. During the four-year period, three high-flow events changed the streambed downstream of construction including channel widening and aggradation and then degradation of the streambed. Upstream of construction, at a reinforced gravel berm, bank erosion was documented. The reference section remained relatively unchanged. Knowledge gained by documenting channel changes in response to natural and anthropogenic variables can be useful for managers and engineers involved in highway construction projects.

Validation of the transportation computer codes HIGHWAY, INTERLINE, RADTRAN 4, and RISKIND

International Nuclear Information System (INIS)

Maheras, S.J.; Pippen, H.K.

1995-05-01

The computer codes HIGHWAY, INTERLINE, RADTRAN 4, and RISKIND were used to estimate radiation doses from the transportation of radioactive material in the Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Environmental Impact Statement. HIGHWAY and INTERLINE were used to estimate transportation routes for truck and rail shipments, respectively. RADTRAN 4 was used to estimate collective doses from incident-free transportation and the risk (probability x consequence) from transportation accidents. RISKIND was used to estimate incident-free radiation doses for maximally exposed individuals and the consequences from reasonably foreseeable transportation accidents. The purpose of this analysis is to validate the estimates made by these computer codes; critiques of the conceptual models used in RADTRAN 4 are also discussed. Validation is defined as ''the test and evaluation of the completed software to ensure compliance with software requirements.'' In this analysis, validation means that the differences between the estimates generated by these codes and independent observations are small (i.e., within the acceptance criterion established for the validation analysis). In some cases, the independent observations used in the validation were measurements; in other cases, the independent observations used in the validation analysis were generated using hand calculations. The results of the validation analyses performed for HIGHWAY, INTERLINE, RADTRAN 4, and RISKIND show that the differences between the estimates generated using the computer codes and independent observations were small. Based on the acceptance criterion established for the validation analyses, the codes yielded acceptable results; in all cases the estimates met the requirements for successful validation

The Design of Transportation Equipment in Terms of Human Capabilities. The Role of Engineering Psychology in Transport Safety.

Science.gov (United States)

McFarland, Ross A.

Human factors engineering is considered with regard to the design of safety factors for aviation and highway transportation equipment. Current trends and problem areas are identified for jet air transportation and for highway transportation. Suggested solutions to transportation safety problems are developed by applying the techniques of human…

Frequency and distribution of highway crossings by Kenai Peninsula brown bears

OpenAIRE

Graves, Tabitha A.; Farley, Sean; Servheen, Christopher

2003-01-01

Highway construction and expansion through bear habitat can negatively affect brown bear populations. Highway structures can decrease habitat availability through habitat loss and restricted access, roads often displace animals and cause re-direction of natural movements, and highways can act as barriers to decrease gene flow. Lastly, highway traffic can cause direct bear and human mortality through car-animal collisions. We examined the spatial and temporal distribution of brown bear crossin...

Response of benthic macroinvertebrate communities to highway construction in an Appalachian watershed

Science.gov (United States)

Hedrick, Lara B.; Welsh, S.A.; Anderson, James T.; Lin, L.-S.; Chen, Y.; Wei, X.

2010-01-01

Highway construction in mountainous areas can result in sedimentation of streams, negatively impacting stream habitat, water quality, and biotic communities. We assessed the impacts of construction of a segment of Corridor H, a four-lane highway, in the Lost River watershed, West Virginia, by monitoring benthic macroinvertebrate communities and water quality, before, during, and after highway construction and prior to highway use at upstream and downstream sites from 1997 through 2007. Data analysis of temporal impacts of highway construction followed a Before-After-Control-Impact (BACI) study design. Highway construction impacts included an increase in stream sedimentation during the construction phase. This was indicated by an increase in turbidity and total suspended solids. Benthic macroinvertebrate metrics indicated a community more tolerant during and after construction than in the period before construction. The percent of Chironomidae and the Hilsenhoff Biotic Index (HBI) increased, while percent of Ephemeroptera, Plecoptera, and Trichoptera (EPT) decreased. Our 10-year study addressed short-term impacts of highway construction and found that impacts were relatively minimal. A recovery of the number of EPT taxa collected after construction indicated that the benthic macroinvertebrate community may be recovering from impacts of highway construction. However, this study only addressed a period of 3 years before, 3 years during, and 4 years post construction. Inferences cannot be made concerning the long-term impacts of the highway, highway traffic, runoff, and other factors associated with highway use. Continual monitoring of the watershed is necessary to determine if the highway has a continual impact on stream habitat, water quality, and biotic integrity. ?? 2010 Springer Science+Business Media B.V.

Status of nuclear engineering education in the United States

International Nuclear Information System (INIS)

Brown, G.J.

2000-01-01

Nuclear engineering education in the United States is reflective of the perceived health of the nuclear electric power industry within the country. Just as new commercial reactor orders have vanished and some power plants have shut down, so too have university enrollments shrunk and research reactors closed. This decline in nuclear trained specialists and the disappearance of the nuclear infrastructure is a trend that must be arrested and reversed if the United States is to have a workforce capable of caring for a nuclear power industry to not only meet future electric demand but to ensure that the over 100 existing plants, their supporting facilities and their legacy in the form of high level waste and facility clean-up are addressed. Additionally, the United States has an obligation to support and maintain its nuclear navy and other defence needs. And, lastly, if the United States is to have a meaningful role in the international use of nuclear power with regard to safety, non-proliferation and the environment, then it is imperative that the country continues to produce world-class nuclear engineers and scientists by supporting nuclear engineering education at its universities. The continued support of the federal government. and industry for university nuclear engineering and nuclear energy research and development is essential to sustain the nuclear infrastructure in the United States. Even with this support, and the continued excellent operation of the existing fleet of nuclear electric power plants, it is conceivable that nuclear engineering as an academic discipline may fall victim to poor communications and a tarnished public image. What is needed is a combination of federal and industrial support along with the creativity of the universities to expand their offerings to include more than power production. The objective is a positive message on careers in nuclear related fields, and recognition of the important role of nuclear energy in meeting the country

a Geographic Weighted Regression for Rural Highways Crashes Modelling Using the Gaussian and Tricube Kernels: a Case Study of USA Rural Highways

Science.gov (United States)

Aghayari, M.; Pahlavani, P.; Bigdeli, B.

2017-09-01

Based on world health organization (WHO) report, driving incidents are counted as one of the eight initial reasons for death in the world. The purpose of this paper is to develop a method for regression on effective parameters of highway crashes. In the traditional methods, it was assumed that the data are completely independent and environment is homogenous while the crashes are spatial events which are occurring in geographic space and crashes have spatial data. Spatial data have spatial features such as spatial autocorrelation and spatial non-stationarity in a way working with them is going to be a bit difficult. The proposed method has implemented on a set of records of fatal crashes that have been occurred in highways connecting eight east states of US. This data have been recorded between the years 2007 and 2009. In this study, we have used GWR method with two Gaussian and Tricube kernels. The Number of casualties has been considered as dependent variable and number of persons in crash, road alignment, number of lanes, pavement type, surface condition, road fence, light condition, vehicle type, weather, drunk driver, speed limitation, harmful event, road profile, and junction type have been considered as explanatory variables according to previous studies in using GWR method. We have compered the results of implementation with OLS method. Results showed that R2 for OLS method is 0.0654 and for the proposed method is 0.9196 that implies the proposed GWR is better method for regression in rural highway crashes.

A GEOGRAPHIC WEIGHTED REGRESSION FOR RURAL HIGHWAYS CRASHES MODELLING USING THE GAUSSIAN AND TRICUBE KERNELS: A CASE STUDY OF USA RURAL HIGHWAYS

Directory of Open Access Journals (Sweden)

M. Aghayari

2017-09-01

Full Text Available Based on world health organization (WHO report, driving incidents are counted as one of the eight initial reasons for death in the world. The purpose of this paper is to develop a method for regression on effective parameters of highway crashes. In the traditional methods, it was assumed that the data are completely independent and environment is homogenous while the crashes are spatial events which are occurring in geographic space and crashes have spatial data. Spatial data have spatial features such as spatial autocorrelation and spatial non-stationarity in a way working with them is going to be a bit difficult. The proposed method has implemented on a set of records of fatal crashes that have been occurred in highways connecting eight east states of US. This data have been recorded between the years 2007 and 2009. In this study, we have used GWR method with two Gaussian and Tricube kernels. The Number of casualties has been considered as dependent variable and number of persons in crash, road alignment, number of lanes, pavement type, surface condition, road fence, light condition, vehicle type, weather, drunk driver, speed limitation, harmful event, road profile, and junction type have been considered as explanatory variables according to previous studies in using GWR method. We have compered the results of implementation with OLS method. Results showed that R2 for OLS method is 0.0654 and for the proposed method is 0.9196 that implies the proposed GWR is better method for regression in rural highway crashes.

Optimal Retrofit Scheme for Highway Network under Seismic Hazards

Directory of Open Access Journals (Sweden)

Yongxi Huang

2014-06-01

Full Text Available Many older highway bridges in the United States (US are inadequate for seismic loads and could be severely damaged or collapsed in a relatively small earthquake. According to the most recent American Society of Civil Engineers’ infrastructure report card, one-third of the bridges in the US are rated as structurally deficient and many of these structurally deficient bridges are located in seismic zones. To improve this situation, at-risk bridges must be identified and evaluated and effective retrofitting programs should be in place to reduce their seismic vulnerabilities. In this study, a new retrofit strategy decision scheme for highway bridges under seismic hazards is developed and seamlessly integrate the scenario-based seismic analysis of bridges and the traffic network into the proposed optimization modeling framework. A full spectrum of bridge retrofit strategies is considered based on explicit structural assessment for each seismic damage state. As an empirical case study, the proposed retrofit strategy decision scheme is utilized to evaluate the bridge network in one of the active seismic zones in the US, Charleston, South Carolina. The developed modeling framework, on average, will help increase network throughput traffic capacity by 45% with a cost increase of only $15million for the Mw 5.5 event and increase the capacity fourfold with a cost of only $32m for the Mw 7.0 event.

Landslide detection using LiDAR data and data mining technology: Ali Mountain Highway case study (Taiwan)

Science.gov (United States)

Cheng, Youg-Sin; Yu, Teng-To; Tarolli, Paolo

2017-04-01

Taiwan mountains are severely affected each year by landslides, rock falls, and debris flows where the roads system suffer the most critical consequences. Among all mountain highways, Ali Highway, located into the main entrance of Alishan Mountain region, is one of the most landslide-prone areas in southern Taiwan. During the typhoon season, between May and August, the probability of occurrence of mass movements is at higher level than usual seeing great erosion rates. In fact, during Typhoon Morakot, in 2009, the intense rainfall caused abrupt interruption of the circulation for three months triggering several landslides (Liu et al. 2012). The topographic features such as slope, roughness and curvature among others have been extracted from 1 m DTM derived by a LiDAR dataset (collected in 2015) to investigate the slope failures along the Ali Mountain Highway. The high-resolution DTM highlighted that the hydrogeomorphological (e.g. density of stream, the distance from the ridge and terrain) features are one of the most influencing factors affecting the change and the instability of the slopes. To detect the landslide area, the decision tree classifier and the random forest algorithm (RF) have been adopted. The results provided a suitable analysis of the area involved in the failure. This will be a useful step in the understanding (and management) landslide processes of study area. References Liu CN, Dong JJ, Chen CJ, Lee WF (2012) Typical landslides and related mechanisms in Ali Mountain highway induced by typhoon Morakot: Perspectives from engineering geology. Landslides 9:239-254.

Mortality among California highway workers.

Science.gov (United States)

Maizlish, N; Beaumont, J; Singleton, J

1988-01-01

Standardized proportional mortality ratios (PMR) were computed for a population of highway workers. Hazards of highway maintenance work include exposure to solvents, herbicides, asphalt and welding fumes, diesel and auto exhaust, asbestos, abrasive dusts, hazardous material spills, and moving motor vehicles. Underlying cause of death was obtained for 1,570 workers who separated from the California Department of Transportation between 1970 and 1983, and who died in California between 1970 and 1983 (inclusive). Among 1,260 white males, the major findings were statistically significant excesses of cancers of digestive organs (PMR = 128), skin (PMR = 218), lymphopoietic cancer (PMR = 157), benign neoplasms (PMR = 343), motor vehicle accidents (PMR = 141), and suicide (PMR = 154). Black males (N = 66) experienced nonsignificant excesses of cancer of the digestive organs (PMR = 191) and arteriosclerotic heart disease (PMR = 143). Among 168 white females, deaths from lung cancer (PMR = 189) and suicide (PMR = 215) were elevated. White male retirees, a subgroup with 5 or more years of service, experienced excess mortality due to cancers of the colon (PMR = 245), skin (PMR = 738), brain (PMR = 556), and lymphosarcomas and reticulosarcomas (PMR = 514). Deaths from external causes (PMR = 135) and cirrhosis of the liver (PMR = 229) were elevated among white males with a last job in landscape maintenance. White males whose last job was highway maintenance experienced a deficit in mortality from circulatory diseases (PMR = 83) and excess mortality from emphysema (PMR = 250) and motor vehicle accidents (PMR = 196). Further epidemiologic and industrial hygiene studies are needed to confirm the apparent excess mortality and to quantify occupational and nonoccupational exposures. However, reduction of recognized hazards among highway maintenance workers is a prudent precautionary measure.

An integrated model for the Environmental Impact Assessment of Highways in China

DEFF Research Database (Denmark)

Cai, Hao

2011-01-01

In China, environmental issues caused by construction and operation of highway catch more and more attention, and thus environmental impact assessment of highway has become an important part of feasibility study. According to the Specifications for Environmental Impact Assessment of Highways...... in the People's Republic of China, this paper proposes an integrated model for Environmental Impact Assessment (EIA) of highway. The model has two main characteristics. Firstly, the whole highway is divided into several sections, and then weight of each section is distributed by its importance. Secondly...

76 FR 54830 - Identification of Interstate Motor Vehicles: The Port Authority of New York and New Jersey's...

Science.gov (United States)

2011-09-02

... an adequate system of safely engineered highways; to foster and promote sound and reasonable taxation... advance the interests of highway transportation and highway users generally. The Port Authority is a bi... taxation not subject to collection through the International Fuel Tax Agreement; (3) under a State law...

Inter-individual variability of stone marten behavioral responses to a highway.

Directory of Open Access Journals (Sweden)

Fernando Ascensão

Full Text Available Efforts to reduce the negative impacts of roads on wildlife may be hindered if individuals within the population vary widely in their responses to roads and mitigation strategies ignore this variability. This knowledge is particularly important for medium-sized carnivores as they are vulnerable to road mortality, while also known to use available road passages (e.g., drainage culverts for safely crossing highways. Our goal in this study was to assess whether this apparently contradictory pattern of high road-kill numbers associated with a regular use of road passages is attributable to the variation in behavioral responses toward the highway between individuals. We investigated the responses of seven radio-tracked stone martens (Martes foina to a highway by measuring their utilization distribution, response turning angles and highway crossing patterns. We compared the observed responses to simulated movement parameterized by the observed space use and movement characteristics of each individual, but naïve to the presence of the highway. Our results suggested that martens demonstrate a diversity of responses to the highway, including attraction, indifference, or avoidance. Martens also varied in their highway crossing patterns, with some crossing repeatedly at the same location (often coincident with highway passages. We suspect that the response variability derives from the individual's familiarity of the landscape, including their awareness of highway passage locations. Because of these variable yet potentially attributable responses, we support the use of exclusionary fencing to guide transient (e.g., dispersers individuals to existing passages to reduce the road-kill risk.

Kempe's engineers year-book for 1977. Volume II

Energy Technology Data Exchange (ETDEWEB)

Prockter, C.E. (ed.)

1977-01-01

The second volume of this two-volume yearbook contains data on: electrical and electronic engineering; aerodynamics and aircraft propulsion; gas turbines; internal combustion engines; motor vehicles; fuels; fluidics; nuclear energy; gas and gas engineering; steam engineering and steam turbines; marine diesel engines; naval architecture; mining engineering; industrial explosives; air compression, pneumatic equipment, etc.; refrigeration, heating, ventilation and air conditioning; lighting; industrial safety and protection; fire protection; highway engineering; surveying; foundation and earthwork; cements, mortars and clay products; buildings; public health engineering; concretes; design of steel structures; bridges and bridgework; paints and coatings; patents, designs and trade marks; depreciation; legal notes for engineers; factory planning and layout; and agricultural engineering. (1325p.) A subject index is provided. (LCL)

Geotechnical considerations of perennial failures of a highway ...

African Journals Online (AJOL)

The causes of frequent failures of the Kumasi – Accra highway section at Wiwiso have been investigated to offer remedial measures on future reconstruction works. The study of the highway section at Wiwiso has revea-led that pavements can undergo considerable distress when seepage control considerations are partially ...

Quantum Nanomechanics: State Engineering and Measurement

International Nuclear Information System (INIS)

Woolley, M. J.; Milburn, G. J.; Doherty, A. C.

2011-01-01

There has recently been a surge of interest in the study of mechanical systems near the quantum limit. Such experiments are motivated by both fundamental interest in studying quantum mechanics with macroscopic engineered systems and potential applications as ultra-sensitive transducers, or even in quantum information processing. A particularly promising system is a microwave cavity optomechanical system, in which a nanomechanical resonator is embedded within (and capacitively coupled to) a superconducting microwave cavity. Here we discuss two schemes for the generation and measurement of quantum states of the nanomechanical resonator. A quantum squeezed state may be generated via mechanical parametric amplification, while a number state may be conditionally generated via continuous measurement and feedback control mediated by a superconducting qubit.

Multiphoton quantum optics and quantum state engineering

International Nuclear Information System (INIS)

Dell'Anno, Fabio; De Siena, Silvio; Illuminati, Fabrizio

2006-01-01

We present a review of theoretical and experimental aspects of multiphoton quantum optics. Multiphoton processes occur and are important for many aspects of matter-radiation interactions that include the efficient ionization of atoms and molecules, and, more generally, atomic transition mechanisms; system-environment couplings and dissipative quantum dynamics; laser physics, optical parametric processes, and interferometry. A single review cannot account for all aspects of such an enormously vast subject. Here we choose to concentrate our attention on parametric processes in nonlinear media, with special emphasis on the engineering of nonclassical states of photons and atoms that are relevant for the conceptual investigations as well as for the practical applications of forefront aspects of modern quantum mechanics. We present a detailed analysis of the methods and techniques for the production of genuinely quantum multiphoton processes in nonlinear media, and the corresponding models of multiphoton effective interactions. We review existing proposals for the classification, engineering, and manipulation of nonclassical states, including Fock states, macroscopic superposition states, and multiphoton generalized coherent states. We introduce and discuss the structure of canonical multiphoton quantum optics and the associated one- and two-mode canonical multiphoton squeezed states. This framework provides a consistent multiphoton generalization of two-photon quantum optics and a consistent Hamiltonian description of multiphoton processes associated to higher-order nonlinearities. Finally, we discuss very recent advances that by combining linear and nonlinear optical devices allow to realize multiphoton entangled states of the electromagnetic field, either in discrete or in continuous variables, that are relevant for applications to efficient quantum computation, quantum teleportation, and related problems in quantum communication and information

Multiphoton quantum optics and quantum state engineering

Energy Technology Data Exchange (ETDEWEB)

Dell' Anno, Fabio [Dipartimento di Fisica ' E. R. Caianiello' , Universita degli Studi di Salerno, CNISM and CNR-INFM Coherentia, and INFN Sezione di Napoli, Gruppo Collegato di Salerno, Via S. Allende, I-84081 Baronissi (Saudi Arabia) (Italy)]. E-mail: dellanno@sa.infn.it; De Siena, Silvio [Dipartimento di Fisica ' E. R. Caianiello' , Universita degli Studi di Salerno, CNISM and CNR-INFM Coherentia, and INFN Sezione di Napoli, Gruppo Collegato di Salerno, Via S. Allende, I-84081 Baronissi (SA) (Italy)]. E-mail: desiena@sa.infn.it; Illuminati, Fabrizio [Dipartimento di Fisica ' E. R. Caianiello' , Universita degli Studi di Salerno, CNISM and CNR-INFM Coherentia, and INFN Sezione di Napoli, Gruppo Collegato di Salerno, Via S. Allende, I-84081 Baronissi (SA) (Italy)]. E-mail: illuminati@sa.infn.it

2006-05-15

We present a review of theoretical and experimental aspects of multiphoton quantum optics. Multiphoton processes occur and are important for many aspects of matter-radiation interactions that include the efficient ionization of atoms and molecules, and, more generally, atomic transition mechanisms; system-environment couplings and dissipative quantum dynamics; laser physics, optical parametric processes, and interferometry. A single review cannot account for all aspects of such an enormously vast subject. Here we choose to concentrate our attention on parametric processes in nonlinear media, with special emphasis on the engineering of nonclassical states of photons and atoms that are relevant for the conceptual investigations as well as for the practical applications of forefront aspects of modern quantum mechanics. We present a detailed analysis of the methods and techniques for the production of genuinely quantum multiphoton processes in nonlinear media, and the corresponding models of multiphoton effective interactions. We review existing proposals for the classification, engineering, and manipulation of nonclassical states, including Fock states, macroscopic superposition states, and multiphoton generalized coherent states. We introduce and discuss the structure of canonical multiphoton quantum optics and the associated one- and two-mode canonical multiphoton squeezed states. This framework provides a consistent multiphoton generalization of two-photon quantum optics and a consistent Hamiltonian description of multiphoton processes associated to higher-order nonlinearities. Finally, we discuss very recent advances that by combining linear and nonlinear optical devices allow to realize multiphoton entangled states of the electromagnetic field, either in discrete or in continuous variables, that are relevant for applications to efficient quantum computation, quantum teleportation, and related problems in quantum communication and information.

76 FR 7194 - California State Nonroad Engine Pollution Control Standards; Request for Authorization of...

Science.gov (United States)

2011-02-09

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9264-3] California State Nonroad Engine Pollution Control... Toxic Control Measure (ATCM) for in-use portable diesel-fueled engines 50 brake-horsepower (hp) and... within-the-scope confirmation. \\2\\ This includes: California State Nonroad Engine Pollution Control...

Weighted Complex Network Analysis of Pakistan Highways

Directory of Open Access Journals (Sweden)

Yasir Tariq Mohmand

2013-01-01

Full Text Available The structure and properties of public transportation networks have great implications in urban planning, public policies, and infectious disease control. This study contributes a weighted complex network analysis of travel routes on the national highway network of Pakistan. The network is responsible for handling 75 percent of the road traffic yet is largely inadequate, poor, and unreliable. The highway network displays small world properties and is assortative in nature. Based on the betweenness centrality of the nodes, the most important cities are identified as this could help in identifying the potential congestion points in the network. Keeping in view the strategic location of Pakistan, such a study is of practical importance and could provide opportunities for policy makers to improve the performance of the highway network.

Highway three-dimensional modeling based on Vehicle-borne laser data

International Nuclear Information System (INIS)

Weili, Sun; Ruofei, Zhong; Jiangxia, Wei; Fanyang, Zeng

2014-01-01

The of Vehicle-borne LiDAR (Light Detection And Ranging) scanning technology is an efficiently practical approach on the acquisition and application of 3D information and its geographic elements of highway(including road surface, rails, attached facilities, slopes, ditches, etc.). The acquired information is significant on many aspects such as road maintenance, reconstruction, survey, landscape design, visualized modelling and highway hazard supervision and prevention. The initial laser data cannot be directly used to construct highway 3D model, operations of pre-processing are necessary. This paper presented a set of procedure about pre-processing laser data and constructing TIN (Triangle Irregular Net) model of highway

Highway runoff quality models for the protection of environmentally sensitive areas

Science.gov (United States)

Trenouth, William R.; Gharabaghi, Bahram

2016-11-01

This paper presents novel highway runoff quality models using artificial neural networks (ANN) which take into account site-specific highway traffic and seasonal storm event meteorological factors to predict the event mean concentration (EMC) statistics and mean daily unit area load (MDUAL) statistics of common highway pollutants for the design of roadside ditch treatment systems (RDTS) to protect sensitive receiving environs. A dataset of 940 monitored highway runoff events from fourteen sites located in five countries (Canada, USA, Australia, New Zealand, and China) was compiled and used to develop ANN models for the prediction of highway runoff suspended solids (TSS) seasonal EMC statistical distribution parameters, as well as the MDUAL statistics for four different heavy metal species (Cu, Zn, Cr and Pb). TSS EMCs are needed to estimate the minimum required removal efficiency of the RDTS needed in order to improve highway runoff quality to meet applicable standards and MDUALs are needed to calculate the minimum required capacity of the RDTS to ensure performance longevity.

26 CFR 1.46-11 - Commuter highway vehicles.

Science.gov (United States)

2010-04-01

... Rules for Computing Credit for Investment in Certain Depreciable Property § 1.46-11 Commuter highway... investment under section 46(c)(1) for a qualifying commuter highway vehicle is 100 percent. A qualifying... meets the following requirements: (1) The vehicle is section 38 property in the hands of the taxpayer...

Maine highway safety plan

Science.gov (United States)

2010-01-01

Each September 1, the MeBHS must provide NHTSA a comprehensive plan to reduce : traffic crashes and resulting deaths, injuries and property damage. The Highway Safety : Plan (HSP) serves as Maines application for available federal funds for these ...

Bad Foundation and its Treatment of HeBei Coastal Highway | Ye ...

African Journals Online (AJOL)

In recent years, with the accelerating urbanization process, the national road network continues to expand, a lot of highway construction projects are in the countryside. The geological properties of high level, long distance highway foundation are complicated. In order to guarantee the stability of highway embankment, we ...

Wildlife Mortality on National Highway 72 and 74 Across Rajaji National Park, North India

Directory of Open Access Journals (Sweden)

Ritesh JOSHI

2012-06-01

Full Text Available Evaluating the road impact on resident wildlife is one of the important aspects of future conservation planning and of management related actions. Expanding a motor road network in and around protected habitats is considered to be a major threat that can cause the extinction of endangered species. We assessed vertebrate fauna mortality on two inter–state national highways: No. 72 (Haridwar–Dehradun and 74 (Haridwar–Bijnor and an ancillary road running across the Rajaji National Park and Haridwar Conservation area, North India. Field data on wildlife mortality was collected from June 2009 to May 2011. A total of 352 individuals of 39 species (3 amphibians, 9 reptiles, 18 mammals and 9 avian species were found dead on the national highways 72 & 74 and Haridwar–Chilla–Rishikesh motor road, which is running in between Rajaji National Park. Among all the mortalities, avian species were the most affected accounting for 38%, followed by mammals (27%. During Maha–Kumbh 2010, road accidents increased. It was an event that caused tremendous disturbance in animal migratory corridors and in drinking sites. The evaluation of vehicle traffic pressure on national highways revealed that ±14100 and ±9900 vehicles had been moving across these highways every day. In addition to that, expanding the motor roads network and increasing vehicle traffic pressure is disrupting ecological connectivity and impeding the movement of wild animals. In addition, wildlife mortality rate was observed to be increasing. Further studies are needed to understand the ecological impacts of increasing vehicle traffic on various national highways and roads and on animal behavioral responses, in order to take proper conservation actions

CNNH_PSS: protein 8-class secondary structure prediction by convolutional neural network with highway.

Science.gov (United States)

Zhou, Jiyun; Wang, Hongpeng; Zhao, Zhishan; Xu, Ruifeng; Lu, Qin

2018-05-08

Protein secondary structure is the three dimensional form of local segments of proteins and its prediction is an important problem in protein tertiary structure prediction. Developing computational approaches for protein secondary structure prediction is becoming increasingly urgent. We present a novel deep learning based model, referred to as CNNH_PSS, by using multi-scale CNN with highway. In CNNH_PSS, any two neighbor convolutional layers have a highway to deliver information from current layer to the output of the next one to keep local contexts. As lower layers extract local context while higher layers extract long-range interdependencies, the highways between neighbor layers allow CNNH_PSS to have ability to extract both local contexts and long-range interdependencies. We evaluate CNNH_PSS on two commonly used datasets: CB6133 and CB513. CNNH_PSS outperforms the multi-scale CNN without highway by at least 0.010 Q8 accuracy and also performs better than CNF, DeepCNF and SSpro8, which cannot extract long-range interdependencies, by at least 0.020 Q8 accuracy, demonstrating that both local contexts and long-range interdependencies are indeed useful for prediction. Furthermore, CNNH_PSS also performs better than GSM and DCRNN which need extra complex model to extract long-range interdependencies. It demonstrates that CNNH_PSS not only cost less computer resource, but also achieves better predicting performance. CNNH_PSS have ability to extracts both local contexts and long-range interdependencies by combing multi-scale CNN and highway network. The evaluations on common datasets and comparisons with state-of-the-art methods indicate that CNNH_PSS is an useful and efficient tool for protein secondary structure prediction.

Spatial Planning for Transit Tourism on The Highway: A Case Study of Highway Е-75 Through Vojvodina (Horgoš – Belgrade Section

Directory of Open Access Journals (Sweden)

Vuk GARAČA

2015-02-01

Full Text Available The quality and extent of traffc infrastructure has an immense infuence on the development of tourist destinations and on tourism in gener-al. Transit tourism is a unique form of movement and represents a link between generating zones and destinations. The subject of this study is the planning and spatial organization along the route of Highway Е-75 thorough northern Serbian province of Vojvodina. The goal of the study is to scientifcally assert that the route of highway is inadequately equipped as it lacks adequate hospitality services considering its signifcance and the needs of passengers in transit. The pa-per intends to analyze the growing tourists’ de-mands perceived in passenger numbers and the passenger vehicles turnover with existing tourist products.The spatial extent of the research comprises the section of Highway Е-75 through Vojvodina (Horgoš – Subotica – Bačka Topola – Vrbas – Novi Sad – Beška – Indjija – Stara Pazova. The study utilizes mixed quantitative and qual-itative methods, and employs preliminary desk research, feld work, comparative analysis, and a description to establish a critical synthetic narrative. The statistical method of Pearson cor-relation was used for quantitative data analysis and to assess the relationship between overnight stays in places along the highway and the num-ber of passengers travelling the highway. The results of the research pointed out that the initial hypothesis which refers to the lack of specialized accommodation capacity in the highway zone is valid.

Assessment of Pronghorn movements and strategies to promote highway permeability : US Highway 89.

Science.gov (United States)

2010-05-01

Pronghorn (Antilocapra americana) movements were investigated with Global Position System (GPS) : telemetry from 2007 to 2008 along a 28-mile stretch of U.S. Highway 89 in northern Arizona to develop : strategies to enhance permeability with future h...

Impact of evaporite dissolution and collapse on highways and other cultural features in the Texas Panhandle and Eastern New Mexico

International Nuclear Information System (INIS)

Simpkins, W.W.; Gustavson, T.C.; Alhades, A.B.; Hoadley, A.D.

1981-01-01

Geological investigations in the Texas Panhandle and eastern New Mexico indicate that regional subsurface dissolution of Permian evaporites has occurred and is an ongoing process. Evidence of removal of large volumes of evaporites (mainly halite) and collapse of overlying beds is demonstrated by cross sections constructed from gamma-ray logs. Surface manifestation of subsurface dissolution and collapse is clearly shown in Hall County, Texas, where over 400 sinkholes and undrained depressions have been identified from aerial photographs. Sinkhole diameters up to approximately 100 m (300 ft) and depths to 15 m (50 ft) have been observed. Eleven active northeast- and southwest-trending fractures and faults have been recognizd, some of which are demonstrated as patched sections of highways. Formation of collapse features and faults that damage highways is a recognized problem in the region. Stock tanks and large reservors are also affected to a lesser degree. Dissolution and collapse pose difficult problems for geologists, highway engineers, and maintenance crews. Areas of active subsurface dissolution have been identified, but development of collapse features and faults at the surface generally follows no predictable pattern. The history of, and potential for, evaporite dissolution sould be investigated in each area before construction of highways, reservoirs, and stock tanks. Areas with high densities of collapse features, fractures, and faults should be avoided when possible

23 CFR 657.7 - Objective.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Objective. 657.7 Section 657.7 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS CERTIFICATION OF SIZE AND WEIGHT ENFORCEMENT § 657.7 Objective. The objective of this regulation is the development and operation by each State...

A comprehensive methodology for the analysis of highway sight distance

OpenAIRE

Castro Malpica, María; Santos Berbel, César de; Iglesias Martínez, Luis

2017-01-01

As one of the main elements of geometric design, sight distance must be considered carefully for the safe and efficient operation of highways. An application developed on geographic information systems (GIS) was con-ceived for the three-dimensional estimation of sight distance on highways, as opposed to conventional two-dimensional techniques, which may underestimate or overestimate the actual visibility conditions. It is capable of computing the available sight distance of a highway section ...

Assuring bridge safety and serviceability in Europe

Science.gov (United States)

2010-08-01

U.S. engineers need advanced tools and protocols to better assess and assure safety and serviceability of bridges. The Federal Highway Administration, American Association of State Highway and Transportation Officials, and National Cooperative Highwa...

The development of an ecological approach to manage the pollution risk from highway runoff.

Science.gov (United States)

Crabtree, B; Dempsey, P; Johnson, I; Whitehead, M

2009-01-01

In the UK, the Highways Agency is responsible for operating, maintaining and improving the strategic road network in England. One focus of the Highways Agency's ongoing research into the nature and impact of highway runoff is aimed at ensuring that the Highways Agency will meet the requirements of the EU Water Framework Directive. A research programme, undertaken in partnership with the Environment Agency, is in progress to develop a better understanding of pollutants in highway runoff and their ecological impact. The paper presents the outcome of a study to: (1) monitor pollutants in highway runoff under different climate and traffic conditions; (2) develop standards to assess potential ecological risks from soluble pollutants in highway runoff; and (3) develop a model to predict pollutant concentrations in highway runoff. The model has been embedded in a design tool incorporating risk assessment procedures and receiving water standards for soluble and insoluble pollutants--the latter has been developed elsewhere in another project within the research programme. The design tool will be used to support improved guidance on where, and to what level, treatment of runoff is required for highway designers to manage the risk of ecological impact from highway runoff.

Particularities of Expropriation Works for Highways and Regional Planning in Romania

Science.gov (United States)

Moscovici, Anca-Maria; Constantin Musat, Cosmin

2017-10-01

In the actual context of modernization and development of the road and railway infrastructure of Romania, we have to make some expropriation works. These works can assure the legal basis on which a said patch will be transferred from a private owner to the ownership of the Romanian state in order to be used for public interest, while the original owner would receive compensation for the patch of land. In this paper we wish to address the particularities of expropriation for highways and regional planning that provide the legal basis by which an estate passes from private property to state ownership in the public interest needs, none the less compensation being paid. In 2006-2007 began the first works of expropriation of land, on the Arad-Timisoara motorway section, under Government Decision no. 1546/2006. The motorway section we will bring up for discussion in 2016 is situated in the administrative-territorial division Galda de Jos, Alba Iulia County. For patches affected by the highway corridor, if it is to expropriate part of the patch, the cadastral documentation has to be established individually for each resulting lot, respectively for the lot/lots that remain in the ownership of the original owner, but also for the expropriated lot.

Canada's gas taxes = highway robbery

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-05-01

This report was prepared for the second annual 'gas honesty day' (May 18, 2000) in an effort to draw attention to the frustration of Canadian taxpayers with gasoline retailers and the petroleum industry for the inordinately and unjustifiably high prices for gasoline at the pump. The report points out that the public outcry is, in fact, misdirected since the largest profiteers at the pumps, the federal government, remains largely unscathed. It is alleged in the report that gas taxes are tantamount to highway robbery. Ostensibly collected for road construction and maintenance, of the almost $ 5 billion collected in 1999, only a paltry $ 194 million was returned to the provinces for roadway and highway spending. The 10-year average of federal returns to the the provinces from tax on gasoline is a meager 4.7 per cent, which fell even further to 4.1 per cent in 1998-1999. Gasoline tax revenues continue to climb, while government commitment to real roadway and highway spending continues to decline. This document attempts to shed some light on the pricing structure for gasoline. Without defending or explaining the non-tax portion of the pump price charged by Canada's oil companies, which is a task for the oil companies to undertake, the document makes a concerted effort to raise public awareness and focus public attention on government's involvement, namely that gas taxes represent on average about 50 per cent of the pump price and that the majority of the taxes collected are not put back into road and highway improvements. The Canadian Taxpayers Federation, authors of this report, expect that by focusing debate on the issue of gasoline taxes a broad support for a lowering of the overall tax burden on motorists will result. Among other things, the CTF advocates reduction of federal and provincial fuel taxes to levels commensurate with highway funding; dedication of fuel tax revenues to highway construction and maintenance; elimination of the sales and

Second-best Road Pricing Through Highway Franchising

OpenAIRE

Verhoef, Erik T.

2005-01-01

This paper considers the welfare impacts of a range of franchising regimes for congestible highways. For a single road in isolation, it is shown that a competitive auction with the level of road use as the decision criterion produces the socially optimal road (in terms of capacity and toll level) as the equilibrium outcome, provided constant returns to scale characterize highway operations. The auction outperforms various alternatives, in which the bidders are asked to minimize the toll level...

A comparative empirical analysis of statistical models for evaluating highway segment crash frequency

Directory of Open Access Journals (Sweden)

Bismark R.D.K. Agbelie

2016-08-01

Full Text Available The present study conducted an empirical highway segment crash frequency analysis on the basis of fixed-parameters negative binomial and random-parameters negative binomial models. Using a 4-year data from a total of 158 highway segments, with a total of 11,168 crashes, the results from both models were presented, discussed, and compared. About 58% of the selected variables produced normally distributed parameters across highway segments, while the remaining produced fixed parameters. The presence of a noise barrier along a highway segment would increase mean annual crash frequency by 0.492 for 88.21% of the highway segments, and would decrease crash frequency for 11.79% of the remaining highway segments. Besides, the number of vertical curves per mile along a segment would increase mean annual crash frequency by 0.006 for 84.13% of the highway segments, and would decrease crash frequency for 15.87% of the remaining highway segments. Thus, constraining the parameters to be fixed across all highway segments would lead to an inaccurate conclusion. Although, the estimated parameters from both models showed consistency in direction, the magnitudes were significantly different. Out of the two models, the random-parameters negative binomial model was found to be statistically superior in evaluating highway segment crashes compared with the fixed-parameters negative binomial model. On average, the marginal effects from the fixed-parameters negative binomial model were observed to be significantly overestimated compared with those from the random-parameters negative binomial model.

Analyzing the Impact of Highways Associated with Farmland Loss under Rapid Urbanization

Directory of Open Access Journals (Sweden)

Jie Song

2016-06-01

Full Text Available Highway construction has accelerated urban growth and induced direct and indirect changes to land use. Although many studies have analyzed the relationship between highway construction and local development, relatively less attention has been paid to clarifying the various impacts of highways associated with farmland loss. This paper integrates GIS spatial analysis, remote sensing, buffer analysis and landscape metrics to analyze the landscape pattern change induced by direct and indirect highway impacts. This paper explores the interaction between the impact of highways and farmland loss, using the case of the highly urbanized traffic hubs in eastern China, Hang-Jia-Hu Plain. Our results demonstrate that the Hang-Jia-Hu Plain experienced extensive highway construction during 1990–2010, with a clear acceleration of expressway development since 2000. This unprecedented highway construction has directly fragmented the regional landscape and indirectly disturbed the regional landscape by attracting a large amount of built-up land transition from farmland during the last two decades. In the highway-effect zone, serious farmland loss initially occurred in the urban region and then spread to the rural region. Moreover, we found the discontinuous expansion of built-up land scattered the farmland in the rural region and expressway-effect zone. Furthermore, farmland protection policies in the 1990s had the effect of controlling the total area of farmland loss. However, the cohesive farmland structure was still fragmented by the direct and indirect impacts of highway construction. We suggest that an overall farmland protection system should be established to enhance spatial control and mitigate the adverse impacts caused by highway construction. This work improves the understanding of regional sustainable development, and provides a scientific basis for balanced urban development with farmland protection in decision-making processes.

Highway-Rail Crossings Inventory Data

Data.gov (United States)

Department of Transportation — The entire National Highway-Rail Crossing Inventory is available in three separate downloadble files. There is a file of all current Public-at-Grade crossings. There...

State Analysis: A Control Architecture View of Systems Engineering

Science.gov (United States)

Rasmussen, Robert D.

2005-01-01

A viewgraph presentation on the state analysis process is shown. The topics include: 1) Issues with growing complexity; 2) Limits of common practice; 3) Exploiting a control point of view; 4) A glimpse at the State Analysis process; 5) Synergy with model-based systems engineering; and 6) Bridging the systems to software gap.

Estimating Concentrations of Road-Salt Constituents in Highway-Runoff from Measurements of Specific Conductance

Science.gov (United States)

Granato, Gregory E.; Smith, Kirk P.

1999-01-01

Discrete or composite samples of highway runoff may not adequately represent in-storm water-quality fluctuations because continuous records of water stage, specific conductance, pH, and temperature of the runoff indicate that these properties fluctuate substantially during a storm. Continuous records of water-quality properties can be used to maximize the information obtained about the stormwater runoff system being studied and can provide the context needed to interpret analyses of water samples. Concentrations of the road-salt constituents calcium, sodium, and chloride in highway runoff were estimated from theoretical and empirical relations between specific conductance and the concentrations of these ions. These relations were examined using the analysis of 233 highwayrunoff samples collected from August 1988 through March 1995 at four highway-drainage monitoring stations along State Route 25 in southeastern Massachusetts. Theoretically, the specific conductance of a water sample is the sum of the individual conductances attributed to each ionic species in solution-the product of the concentrations of each ion in milliequivalents per liter (meq/L) multiplied by the equivalent ionic conductance at infinite dilution-thereby establishing the principle of superposition. Superposition provides an estimate of actual specific conductance that is within measurement error throughout the conductance range of many natural waters, with errors of less than ?5 percent below 1,000 microsiemens per centimeter (?S/cm) and ?10 percent between 1,000 and 4,000 ?S/cm if all major ionic constituents are accounted for. A semi-empirical method (adjusted superposition) was used to adjust for concentration effects-superposition-method prediction errors at high and low concentrations-and to relate measured specific conductance to that calculated using superposition. The adjusted superposition method, which was developed to interpret the State Route 25 highway-runoff records, accounts for

Methodology and significance of studies of atmospheric deposition in highway runoff

Science.gov (United States)

Colman, John A.; Rice, Karen C.; Willoughby, Timothy C.

2001-01-01

Atmospheric deposition and the processes that are involved in causing and altering atmospheric deposition in relation to highway surfaces and runoff were evaluated nationwide. Wet deposition is more easily monitored than dry deposition, and data on wet deposition are available for major elements and water properties (constituents affecting acid deposition) from the inter-agency National Atmospheric Deposition Program/ National Trends Network (NADP/NTN). Many trace constituents (metals and organic compounds) of interest in highway runoff loads, however, are not included in the NADP/NTN. Dry deposition, which constitutes a large part of total atmospheric deposition for many constituents in highway runoff loads, is difficult to monitor accurately. Dry-deposition rates are not widely available.Many of the highway-runoff investigations that have addressed atmospheric-deposition sources have had flawed investigative designs or problems with methodology. Some results may be incorrect because of reliance on time-aggregated data collected during a period of changing atmospheric emissions. None of the investigations used methods that could accurately quantify the part of highway runoff load that can be attributed to ambient atmospheric deposition. Lack of information about accurate ambient deposition rates and runoff loads was part of the problem. Samples collected to compute the rates and loads were collected without clean-sampling methods or sampler protocols, and without quality-assurance procedures that could validate the data. Massbudget calculations comparing deposition and runoff did not consider loss of deposited material during on-highway processing. Loss of deposited particles from highway travel lanes could be large, as has been determined in labeled particle studies, because of resuspension caused by turbulence from passing traffic. Although a cause of resuspension of large particles, traffic turbulence may increase the rate of deposition for small particles and

The study for installing noise barrier on highway route no.9

Directory of Open Access Journals (Sweden)

Jiradecha Chaddanai

2018-01-01

Full Text Available Highway Route No. 9 is a Bangkok bypass motorway that aims to alleviate traffic congestion in greater Bangkok areas. Presently, it is found a rapid expansion of new communities residing along both side of Highway No. 9. To lessen the noise level, Department of Highways installed the noise barrier on the sensitive locations. However, people from communities living on both sides of highway still demand some additional noise pollution improvement. To improve the efficiency of using noise barriers and to promote environmental and social quality for the people on the sensitive communities along the highway route, the Department of Highways, therefore, designs a new technique for installing noise barrier on the sensitive areas, i.e. education institutions, temple, residential area. In addition, the mathematic model is applied to 12 selected locations of sensitive areas for monitoring the effectiveness of the new installation technique. The mathematic model is used for predict the future noise level after installation of noise barrier in year 2037. The results confirm that the appropriate height and width of noise barrier can improve the comfortable of the people on the sensitive area.

Reliable Freestanding Position-Based Routing in Highway Scenarios

Science.gov (United States)

Galaviz-Mosqueda, Gabriel A.; Aquino-Santos, Raúl; Villarreal-Reyes, Salvador; Rivera-Rodríguez, Raúl; Villaseñor-González, Luis; Edwards, Arthur

2012-01-01

Vehicular Ad Hoc Networks (VANETs) are considered by car manufacturers and the research community as the enabling technology to radically improve the safety, efficiency and comfort of everyday driving. However, before VANET technology can fulfill all its expected potential, several difficulties must be addressed. One key issue arising when working with VANETs is the complexity of the networking protocols compared to those used by traditional infrastructure networks. Therefore, proper design of the routing strategy becomes a main issue for the effective deployment of VANETs. In this paper, a reliable freestanding position-based routing algorithm (FPBR) for highway scenarios is proposed. For this scenario, several important issues such as the high mobility of vehicles and the propagation conditions may affect the performance of the routing strategy. These constraints have only been partially addressed in previous proposals. In contrast, the design approach used for developing FPBR considered the constraints imposed by a highway scenario and implements mechanisms to overcome them. FPBR performance is compared to one of the leading protocols for highway scenarios. Performance metrics show that FPBR yields similar results when considering freespace propagation conditions, and outperforms the leading protocol when considering a realistic highway path loss model. PMID:23202159

Environmental aspects of engineering geological mapping in the United States

Science.gov (United States)

Radbruch-Hall, Dorothy H.

1979-01-01

Many engineering geological maps at different scales have been prepared for various engineering and environmental purposes in regions of diverse geological conditions in the United States. They include maps of individual geological hazards and maps showing the effect of land development on the environment. An approach to assessing the environmental impact of land development that is used increasingly in the United States is the study of a single area by scientists from several disciplines, including geology. A study of this type has been made for the National Petroleum Reserve in northern Alaska. In the San Francisco Bay area, a technique has been worked out for evaluating the cost of different types of construction and land development in terms of the cost of a number of kinds of earth science factors. ?? 1979 International Association of Engineering Geology.

Optimization of Aero Engine Acceleration Control in Combat State Based on Genetic Algorithms

Science.gov (United States)

Li, Jie; Fan, Ding; Sreeram, Victor

2012-03-01

In order to drastically exploit the potential of the aero engine and improve acceleration performance in the combat state, an on-line optimized controller based on genetic algorithms is designed for an aero engine. For testing the validity of the presented control method, detailed joint simulation tests of the designed controller and the aero engine model are performed in the whole flight envelope. Simulation test results show that the presented control algorithm has characteristics of rapid convergence speed, high efficiency and can fully exploit the acceleration performance potential of the aero engine. Compared with the former controller, the designed on-line optimized controller (DOOC) can improve the security of the acceleration process and greatly enhance the aero engine thrust in the whole range of the flight envelope, the thrust increases an average of 8.1% in the randomly selected working states. The plane which adopts DOOC can acquire better fighting advantage in the combat state.

Multiple-state quantum Otto engine, 1D box system

Energy Technology Data Exchange (ETDEWEB)

Latifah, E., E-mail: enylatifah@um.ac.id [Laboratory of Theoretical Physics and Natural Philosophy, Physics Department, Institut Teknologi Sepuluh Nopember, ITS, Surabaya, Indonesia and Physics Department, Malang State University (Indonesia); Purwanto, A. [Laboratory of Theoretical Physics and Natural Philosophy, Physics Department, Institut Teknologi Sepuluh Nopember, ITS, Surabaya (Indonesia)

2014-03-24

Quantum heat engines produce work using quantum matter as their working substance. We studied adiabatic and isochoric processes and defined the general force according to quantum system. The processes and general force are used to evaluate a quantum Otto engine based on multiple-state of one dimensional box system and calculate the efficiency. As a result, the efficiency depends on the ratio of initial and final width of system under adiabatic processes.

CAMAC serial highway interface for the LSI-11

International Nuclear Information System (INIS)

Lau, N.H.

1980-01-01

A CAMAC Serial Highway Interface has been designed for the Local Control and Instrumentation System of the Mirror Fusion Test Facility. There are over 50 distinguishable systems in the facility, each of which consists of the LSI-11 computer, fiber optic communication links, and the CAMAC system. The LSI-11 computer includes a 32k memory, serial modem interface and the CAMAC Serial Highway Interface

Perm State University HPC-hardware and software services: capabilities for aircraft engine aeroacoustics problems solving

Science.gov (United States)

Demenev, A. G.

2018-02-01

The present work is devoted to analyze high-performance computing (HPC) infrastructure capabilities for aircraft engine aeroacoustics problems solving at Perm State University. We explore here the ability to develop new computational aeroacoustics methods/solvers for computer-aided engineering (CAE) systems to handle complicated industrial problems of engine noise prediction. Leading aircraft engine engineering company, including “UEC-Aviadvigatel” JSC (our industrial partners in Perm, Russia), require that methods/solvers to optimize geometry of aircraft engine for fan noise reduction. We analysed Perm State University HPC-hardware resources and software services to use efficiently. The performed results demonstrate that Perm State University HPC-infrastructure are mature enough to face out industrial-like problems of development CAE-system with HPC-method and CFD-solvers.

Reverse Engineering Integrated Circuits Using Finite State Machine Analysis

Energy Technology Data Exchange (ETDEWEB)

Oler, Kiri J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Miller, Carl H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-04-12

In this paper, we present a methodology for reverse engineering integrated circuits, including a mathematical verification of a scalable algorithm used to generate minimal finite state machine representations of integrated circuits.

Zoning of highway flood-triggering environment for highway in Fuling District, Chongqing

Science.gov (United States)

Qin, Qing-mei; Tang, Hong-mei; Chen, Hong-kai

2011-10-01

Based on the geological environment about Fuling district in Chongqing city, eight evaluating indicators on road flooding subsequently environment along the highway: geological disasters developmental condition, rainstorm intensity, flood frequency, landform condition, litho-logical condition, average annual rainfall, vegetation coverage and geological structure, have been chosen. Adopting expert system to double evaluation and using the analysis hierarchy process to confirm the weight of index, accordingly, the mathematical model of evaluation on subsequently environment is put forward. On the support of GIS, grid subsequently environmental index and township administrative division subsequently environmental index, subsequently environment is divided into 4 degrees. They are dangerous zone, high susceptible zone, middle susceptible zone and low susceptible zone of the floods subsequently environment around highway. The results of the study indicate that in the total area, dangerous zone, high susceptible zone, middle susceptible zone and low susceptible zone of road flooding are 11.89%, 41.65%, 32.20% and 14.26% respectively. The results provide some significant scientific evidence for the further risk evaluation of road flooding.

Transportation Infrastructure: Managing the Costs of Large-Dollar Highway Projects

Science.gov (United States)

1997-02-01

The General Accounting Office (GAO) was requested to assess the effectiveness of the Federal Highway Administration's (FHWA's) oversight of the costs of large-dollar highway and bridge projects (those with a total estimated cost of over $100 million)...

Henderson Deep Underground Science and Engineering Lab: Unearthing the secrets of the Universe, underground

International Nuclear Information System (INIS)

Jung, C.K.

2011-01-01

The Henderson Mine near Empire, Colorado is proposed to be the site to host a Deep Underground Science and Engineering Laboratory (DUSEL), which will have a rich program for forefront research in physics, biology, geosciences, and mining engineering. The mine is owned by the Climax Molybdenum Company (CMC). It is located about 50 miles west of Denver and is easily accessible via major highways. The mine is modern and has extensive infrastructure with reserve capacity well-suited to the demands of DUSEL. CMC owns all land required for DUSEL, including the tailings site. It also has all environmental and mining permits required for DUSEL excavation, core drilling, and rock disposal. The mine owners are enthusiastic supporters of this initiative. In support of the Henderson DUSEL project, the State of Colorado has pledged substantial funding for surface construction.

Regional Risk Evaluation of Flood Disasters for the Trunk-Highway in Shaanxi, China

Directory of Open Access Journals (Sweden)

Hong-Liang Qi

2015-10-01

Full Text Available Due to the complicated environment there are various types of highway disasters in Shaanxi Province (China. The damages caused are severe, losses are heavy, and have rapidly increased over the years, especially those caused by flood disasters along the rivers in mountainous areas. Therefore, research on risk evaluations, which play important roles in the prevention and mitigation of highway disasters are very important. An evaluation model was established based on the superposition theory of regional influencing factors to highway flood disasters. Based on the formation mechanism and influencing factors of highway flood disasters, the main influencing factors were selected. These factors include rainstorms, terrain slopes, soil types, vegetation coverage and regional river density, which are based on evaluation indexes from climate conditions and underlying surface of the basin. A regional risk evaluation of highway flood disasters in Shaanxi was established using GIS. The risk index was divided into five levels using statistical methods, in accordance with the regional characteristics of highway flood disasters. Considering the difference in upfront investments, road grade, etc, between expressways and trunk-highways in China, a regional risk evaluation of trunk-highway flood disasters was completed. The evaluation results indicate that the risk evaluation is consistent with the actual situation.

Regional Risk Evaluation of Flood Disasters for the Trunk-Highway in Shaanxi, China.

Science.gov (United States)

Qi, Hong-Liang; Tian, Wei-Ping; Li, Jia-Chun

2015-10-29

Due to the complicated environment there are various types of highway disasters in Shaanxi Province (China). The damages caused are severe, losses are heavy, and have rapidly increased over the years, especially those caused by flood disasters along the rivers in mountainous areas. Therefore, research on risk evaluations, which play important roles in the prevention and mitigation of highway disasters are very important. An evaluation model was established based on the superposition theory of regional influencing factors to highway flood disasters. Based on the formation mechanism and influencing factors of highway flood disasters, the main influencing factors were selected. These factors include rainstorms, terrain slopes, soil types, vegetation coverage and regional river density, which are based on evaluation indexes from climate conditions and underlying surface of the basin. A regional risk evaluation of highway flood disasters in Shaanxi was established using GIS. The risk index was divided into five levels using statistical methods, in accordance with the regional characteristics of highway flood disasters. Considering the difference in upfront investments, road grade, etc, between expressways and trunk-highways in China, a regional risk evaluation of trunk-highway flood disasters was completed. The evaluation results indicate that the risk evaluation is consistent with the actual situation.

Game-Aided Education for Transportation Engineering: Design, Development, and Assessment

OpenAIRE

Wang, Qichao

2017-01-01

Transportation engineering is a wide area that covers different topics including traffic planning, highway design, pavement design, traffic safety, and traffic control. Certain concepts in those topics are challenging and are hard to understand based on textbooks and lectures. In this work, we developed five web games targeting the five topics in transportation engineering education to improve students’ understanding of those hard concepts. The games are hosted in a website server. Students c...

The CVSA pilot study of highway vehicle inspection procedures for the transportation of radioactive materials

International Nuclear Information System (INIS)

Holm, J.; Curtis, G.E.; Branch, K.M.; Coburn, N.L.; Hauth, J.T.

1991-01-01

To further the goal of enhancing the safe and efficient transportation of radioactive materials, the US DOE and the Commercial Vehicle Safety Alliance have entered into a cooperative agreement to conduct a pilot study to test draft procedures for state inspections of highway route controlled quantity radioactive shipments. To succeed, this five-year study requires close collaboration between federal and state agencies and non-government organizations. Significant institutional relationships have been established for this study

Engineering Complex Embedded Systems with State Analysis and the Mission Data System

Science.gov (United States)

Ingham, Michel D.; Rasmussen, Robert D.; Bennett, Matthew B.; Moncada, Alex C.

2004-01-01

It has become clear that spacecraft system complexity is reaching a threshold where customary methods of control are no longer affordable or sufficiently reliable. At the heart of this problem are the conventional approaches to systems and software engineering based on subsystem-level functional decomposition, which fail to scale in the tangled web of interactions typically encountered in complex spacecraft designs. Furthermore, there is a fundamental gap between the requirements on software specified by systems engineers and the implementation of these requirements by software engineers. Software engineers must perform the translation of requirements into software code, hoping to accurately capture the systems engineer's understanding of the system behavior, which is not always explicitly specified. This gap opens up the possibility for misinterpretation of the systems engineer s intent, potentially leading to software errors. This problem is addressed by a systems engineering methodology called State Analysis, which provides a process for capturing system and software requirements in the form of explicit models. This paper describes how requirements for complex aerospace systems can be developed using State Analysis and how these requirements inform the design of the system software, using representative spacecraft examples.

Highway Expenditures and Associated Customer Satisfaction: A Case Study

Directory of Open Access Journals (Sweden)

Alexander Paz

2016-01-01

Full Text Available This study analyzes the satisfaction of the Nevadans with respect to their highway transportation system and the corresponding expenditures of Nevada Department of Transportation (NDOT. A survey questionnaire was designed to capture the opinions of the Nevadans (customers about a number of characteristics of their transportation system. Data from the financial data warehouse of the NDOT was used to evaluate expenditures. Multinomial probit models were estimated to study the correlations between customers’ opinion and the government expenditures in transportation. The results indicate the customer satisfaction is decreasing with respect to traffic safety throughout Northwestern and Southern Nevada highways. In addition, users of Northwestern highways are more likely to be satisfied, compared to their counterparts, with increasing construction spending to reduce the time taken to complete construction projects. In Southern Nevada highways, customers’ satisfaction increases with the expenditures associated with reduction of congestion. These insights are examples of the conclusions that were obtained as a consequence of simultaneously considering customer satisfaction and the corresponding expenditures in transportation.

Principais fatores associados à ocorrência de acidentes de trânsito na BR 163, Mato Grosso, Brasil, 2004 Main factors associated with motor vehicle accidents on Federal Highway 163, Mato Grosso State, Brazil, 2004

Directory of Open Access Journals (Sweden)

Lívia Victório de Carvalho Almeida

2009-02-01

Full Text Available O transporte é essencial para o desenvolvimento econômico de Mato Grosso, Brasil, sendo a BR 163 a principal rodovia de escoamento da produção agropecuária da região. Uma das conseqüências desta atividade é a ocorrência de acidentes de trânsito. Com o objetivo de analisar e categorizar os principais fatores associados à ocorrência de acidentes nesta rodovia, foram utilizados dados da Superintendência de Polícia Rodoviária Federal referentes ao ano de 2004. Nos resultados, destacaram-se como fatores associados à maior chance de ocorrência de acidentes com vítimas (com significância estatística: a condição de rolamento regular (OR = 1,89; IC: 1,32-2,70; os acidentes do tipo colisão frontal (OR = 14,14; IC: 8,96-22,32 e atropelamento de pedestre (OR = 35,95; IC: 8,10-159,52; e os fatores contribuintes defeito na via (OR = 4,35; IC: 1,94-9,75 e desobediência à sinalização (OR = 5,69; IC: 2,01-16,12. Conclui-se que para reduzir o problema dos acidentes nesta rodovia é preciso estabelecer medidas de intervenção de caráter global, não focalizando ações somente na modificação do comportamento do condutor e na fiscalização, mas considerando questões regionais e suas dimensões econômicas, sociais e culturais.Transportation is essential to the economic development of Mato Grosso State, Brazil, and Federal Highway 163 is the main route for marketing regional agricultural produce. One unfortunate consequence of this activity is the occurrence of motor vehicle accidents. With the aim of analyzing and categorizing the main factors associated with motor vehicle accidents on this highway, the current study used data from the Mato Grosso State Division of the Brazilian Federal Highway Patrol for the year 2004. Factors significantly associated with accidents involving casualties were: substandard paving (OR = 1.89; CI: 1.32-2.70; front-end collisions (OR = 14.14; CI: 8.96-22.32; and running over pedestrians (OR = 35.95; CI

Highway crash rates and age-related driver limitations: Literature review and evaluation of data bases

Energy Technology Data Exchange (ETDEWEB)

Hu, P.S. [Oak Ridge National Lab., TN (United States); Young, J.R. [Tennessee Univ., Knoxville, TN (United States); Lu, An [Oak Ridge Associated Universities, Inc., TN (United States)

1993-08-01

American society is undergoing a major demographic transformation that is resulting in a larger proportion of older individuals in the population. Moreover, recent travel surveys show that an increasing number of older individuals are licensed to drive and that they drive more than their same age cohort a decade ago. However, they continue to take shorter trips than younger drivers and they avoid driving during congested hours. This recent demographic transformation in our society, the graying of America, coupled with the increasing mobility of the older population impose a serious highway safety issue that cannot be overlooked. Some of the major concerns are the identification of ``high-risk`` older drivers and the establishment of licensing guidelines and procedures that are based on conclusive scientific evidence. Oak Ridge National Laboratory`s (ORNL) objectives in this project can be characterized by the following tasks: Review and evaluate the 1980 American Association of Motor Vehicle Administrators (AAMVA) and National Highway Traffic Safety Administration (NHTSA) licensing guidelines. Determine whether the license restriction recommended in the 1980 AAMVA and NHTSA guidelines was based on scientific evidence or on judgement of medical advisors. Identify in the scientific literature any medical conditions which are found to be highly associated with highway crashes, and which are not mentioned in the 1980 guidelines. Summarize States` current licensing practices for drivers with age-related physical and mental limitations. Identify potential data sources to establish conclusive evidence on age-related functional impairments and highway crashes.

The analysis of a condition of an accident rate on highways of Tajikistan

International Nuclear Information System (INIS)

Davlatshoev, R.A.; Tursunov, A.A.

2005-01-01

In this clause the results of the analysis of an accident rate on highways of Tajikistan, according to the official information State Automobile Inspection the Ministry of Internal affairs of Republic of Tajikistan, and research of safe movement of automobiles in mountain conditions are given. On the basis of the qualitative and quantitative analysis, the ways of safe movement on roads of Republic of Tajikistan are determined

77 FR 50500 - California State Nonroad Engine Pollution Control Standards; California Nonroad Compression...

Science.gov (United States)

2012-08-21

... ENVIRONMENTAL PROTECTION AGENCY [AMS-FRL 9716-8] California State Nonroad Engine Pollution Control Standards; California Nonroad Compression Ignition Engines--In-Use Fleets; Authorization Request... emissions control of new engines not listed under section 209(e)(1). The section 209(e) rule and its...

Analyses of Lattice Traffic Flow Model on a Gradient Highway

International Nuclear Information System (INIS)

Gupta Arvind Kumar; Redhu Poonam; Sharma Sapna

2014-01-01

The optimal current difference lattice hydrodynamic model is extended to investigate the traffic flow dynamics on a unidirectional single lane gradient highway. The effect of slope on uphill/downhill highway is examined through linear stability analysis and shown that the slope significantly affects the stability region on the phase diagram. Using nonlinear stability analysis, the Burgers, Korteweg-deVries (KdV) and modified Korteweg-deVries (mKdV) equations are derived in stable, metastable and unstable region, respectively. The effect of reaction coefficient is examined and concluded that it plays an important role in suppressing the traffic jams on a gradient highway. The theoretical findings have been verified through numerical simulation which confirm that the slope on a gradient highway significantly influence the traffic dynamics and traffic jam can be suppressed efficiently by considering the optimal current difference effect in the new lattice model. (nuclear physics)

Relationship Between Accumulation and Influx of Pollutants in Highway Ponds

DEFF Research Database (Denmark)

Bentzen, Thomas Ruby; Larsen, Torben; Rasmussen, Michael R.

The paper discusses the long term mass balance of pollutants in highway ponds. The accumulations of five polycyclic aromatic hydrocarbons (PAHs) and six heavy metals have been measured in eight Danish detention ponds, which receive runoff from highways only. For each pollutant the accumulation has...... been compared to the long-term influx, estimated from short-term measurements of concentrations in highway runoff. The results show that a large proportion of the incoming heavy metals in short-term runoff events has accumulated in the ponds. This is not the case for the toxic organic compounds....... The results also show that the accumulation rates for the heavy metals depend significantly on the relative pond area (pond area divided by catchment area). The conclusion is that the mass balances of heavy metals and PAHs in highway ponds can be estimated with acceptable accuracy from a combination of short...

Energy harvesting on highway bridges.

Science.gov (United States)

2011-01-01

A concept for harvesting energy from the traffic-induced loadings on a highway bridge using piezoelectric : materials to generate electricity was explored through the prototype stage. A total of sixteen lead-zirconate : titanate (PZT) Type 5A piezoel...

M5 model tree based predictive modeling of road accidents on non-urban sections of highways in India.

Science.gov (United States)

Singh, Gyanendra; Sachdeva, S N; Pal, Mahesh

2016-11-01

This work examines the application of M5 model tree and conventionally used fixed/random effect negative binomial (FENB/RENB) regression models for accident prediction on non-urban sections of highway in Haryana (India). Road accident data for a period of 2-6 years on different sections of 8 National and State Highways in Haryana was collected from police records. Data related to road geometry, traffic and road environment related variables was collected through field studies. Total two hundred and twenty two data points were gathered by dividing highways into sections with certain uniform geometric characteristics. For prediction of accident frequencies using fifteen input parameters, two modeling approaches: FENB/RENB regression and M5 model tree were used. Results suggest that both models perform comparably well in terms of correlation coefficient and root mean square error values. M5 model tree provides simple linear equations that are easy to interpret and provide better insight, indicating that this approach can effectively be used as an alternative to RENB approach if the sole purpose is to predict motor vehicle crashes. Sensitivity analysis using M5 model tree also suggests that its results reflect the physical conditions. Both models clearly indicate that to improve safety on Indian highways minor accesses to the highways need to be properly designed and controlled, the service roads to be made functional and dispersion of speeds is to be brought down. Copyright © 2016 Elsevier Ltd. All rights reserved.

78 FR 721 - California State Nonroad Engine Pollution Control Standards; Transport Refrigeration Units...

Science.gov (United States)

2013-01-04

... ENVIRONMENTAL PROTECTION AGENCY California State Nonroad Engine Pollution Control Standards... requirements related to the control of emissions from non-new nonroad engines or vehicles. Section 209(e)(2... requirements relating to the control of emissions from new nonroad spark-ignition engines smaller than 50...

[Effect of highway driving on the health of factory workers].

Science.gov (United States)

Uramoto, Hidetaka

2008-06-01

Commuting transportation is one of the important factors in the administration of safety management in industries. Most workers commute to work by car and are certain to make use of highways, mainly because of the special condition of factory locations. In this study, we investigated the effect of communicating by car on the health of factory workers. The proportion of males was significantly higher in the highway (HW) group than in the non-highway (NHW) group, and the former was younger than the latter. BMI, systolic blood pressure, diastolic blood pressure, and total cholesterol deteriorated significantly in the NHW group after 5-year periodic medical checkups. However, in the HW group, those factors did not change except for systolic blood pressure and significant improvements in triglyceride. The percentage of those who follow a good lifestyle regarding excise and nutrition, and have a solution for stress, was lower in the HW group than in the NHW group. Nevertheless, the percentage of those who did not feel stress was significantly higher in the HW group than in the NHW group, suggesting a stress-relieving effect of highway driving. Highway driving might have an unexpectedly good impact on the health of factory workers.

Mathematical model of highways network optimization

Science.gov (United States)

Sakhapov, R. L.; Nikolaeva, R. V.; Gatiyatullin, M. H.; Makhmutov, M. M.

2017-12-01

The article deals with the issue of highways network design. Studies show that the main requirement from road transport for the road network is to ensure the realization of all the transport links served by it, with the least possible cost. The goal of optimizing the network of highways is to increase the efficiency of transport. It is necessary to take into account a large number of factors that make it difficult to quantify and qualify their impact on the road network. In this paper, we propose building an optimal variant for locating the road network on the basis of a mathematical model. The article defines the criteria for optimality and objective functions that reflect the requirements for the road network. The most fully satisfying condition for optimality is the minimization of road and transport costs. We adopted this indicator as a criterion of optimality in the economic-mathematical model of a network of highways. Studies have shown that each offset point in the optimal binding road network is associated with all other corresponding points in the directions providing the least financial costs necessary to move passengers and cargo from this point to the other corresponding points. The article presents general principles for constructing an optimal network of roads.

Engineering photonic density of states using metamaterials

DEFF Research Database (Denmark)

Jacob, Z.; Kim, J.Y.; Naik, G.V.

2010-01-01

The photonic density of states (PDOS), like its electronic counterpart, is one of the key physical quantities governing a variety of phenomena and hence PDOS manipulation is the route to new photonic devices. The PDOS is conventionally altered by exploiting the resonance within a device such as a......The photonic density of states (PDOS), like its electronic counterpart, is one of the key physical quantities governing a variety of phenomena and hence PDOS manipulation is the route to new photonic devices. The PDOS is conventionally altered by exploiting the resonance within a device...... such as a microcavity or a bandgap structure like a photonic crystal. Here we show that nanostructured metamaterials with hyperbolic dispersion can dramatically enhance the photonic density of states paving the way for metamaterial-based PDOS engineering....

40 CFR 86.099-10 - Emission standards for 1999 and later model year Otto-cycle heavy-duty engines and vehicles.

Science.gov (United States)

2010-07-01

... model year Otto-cycle heavy-duty engines and vehicles. 86.099-10 Section 86.099-10 Protection of... to Otto-cycle engines used in such MDPVs, except as specified in subpart S of this part. The term... AND IN-USE HIGHWAY VEHICLES AND ENGINES General Provisions for Emission Regulations for 1977 and Later...

40 CFR 86.005-10 - Emission standards for 2005 and later model year Otto-cycle heavy-duty engines and vehicles.

Science.gov (United States)

2010-07-01

... model year Otto-cycle heavy-duty engines and vehicles. 86.005-10 Section 86.005-10 Protection of... AND IN-USE HIGHWAY VEHICLES AND ENGINES General Provisions for Emission Regulations for 1977 and Later Model Year New Light-Duty Vehicles, Light-Duty Trucks and Heavy-Duty Engines, and for 1985 and Later...

75 FR 11880 - California State Nonroad Engine Pollution Control Standards; California Nonroad Compression...

Science.gov (United States)

2010-03-12

... ENVIRONMENTAL PROTECTION AGENCY [AMS-FRL-9126-4] California State Nonroad Engine Pollution Control... to the control of emissions from either of the following new nonroad engines or nonroad vehicles... other requirements relating to emissions control of new engines not listed under section 209(e)(1). The...

Landslides along Highways: GIS-based Inventory and Planning Issues

Science.gov (United States)

Jaeger, Ann-Kathrin; Klose, Martin; Damm, Bodo

2015-04-01

Highways rank as critical transportation infrastructures that are at risk of landslides in many areas worldwide (e.g., Hungr et al., 1999; Bhandary et al., 2013). Safe and affordable operations of traffic routes constitute the two main criteria for transportation planning in landslide-prone terrain. A right balancing of these often conflicting priorities requires profound knowledge of landslide locations across highway networks and the costs caused by landslides in the past (e.g., Saha et al., 2005). Much of the direct costs affecting transportation departments relate to capital investments for landslide repair or mitigation and operational expenditures in connection with maintenance works. A systematic collection and inventory of such data sets combined with an acquisition of hazard information on vulnerable road sections is still rarely the case in engineering practice. This is despite significant cost impacts and budgetary burdens, especially in peripheral mountain areas where financial resources are naturally limited (e.g., Klose et al., 2014). The present contribution introduces a regional inventory of landslides along highways in the Harz Mountains, NW Germany. As subset of a landslide database for the entire country, this focused GIS-based inventory has been compiled in close collaboration with the Lower Saxony Department of Transportation. The inventory includes data sets gathered by archive studies and relies on high-quality information sources such as maintenance protocols, geotechnical reports, and documents from tendering, controlling, and accounting. A mapping tool in ArcGIS format is used to specify and visualize road sections affected by landslides. This spatial information on hazard exposure is complemented by narrative risk profiles for landslide sites showing a long history of damage events. By summarizing the occurrence dates of landslides, the associated damages, and the types and costs of repair or prevention, such risk profiles are useful to

State alternative route designations

International Nuclear Information System (INIS)

1989-07-01

Pursuant to the Hazardous Materials Transportation Act (HMTA), the Department of Transportation (DOT) has promulgated a comprehensive set of regulations regarding the highway transportation of high-level radioactive materials. These regulations, under HM-164 and HM-164A, establish interstate highways as the preferred routes for the transportation of radioactive materials within and through the states. The regulations also provide a methodology by which a state may select alternative routes. First,the state must establish a ''state routing agency,'' defined as an entity authorized to use the state legal process to impose routing requirements on carriers of radioactive material (49 CFR 171.8). Once identified, the state routing agency must select routes in accordance with Large Quantity Shipments of Radioactive Materials or an equivalent routing analysis. Adjoining states and localities should be consulted on the impact of proposed alternative routes as a prerequisite of final route selection. Lastly, the states must provide written notice of DOT of any alternative route designation before the routes are deemed effective

Highway and interline transportation routing models

International Nuclear Information System (INIS)

Joy, D.S.; Johnson, P.E.

1994-01-01

The potential impacts associated with the transportation of hazardous materials are important issues to shippers, carriers, and the general public. Since transportation routes are a central characteristic in most of these issues, the prediction of likely routes is the first step toward the resolution of these issues. In addition, US Department of Transportation requirements (HM-164) mandate specific routes for shipments of highway controlled quantities of radioactive materials. In response to these needs, two routing models have been developed at Oak Ridge National Laboratory under the sponsorship of the U.S. Department of Energy (DOE). These models have been designated by DOE's Office of Environmental Restoration and Waste Management, Transportation Management Division (DOE/EM) as the official DOE routing models. Both models, HIGHWAY and INTERLINE, are described

Automotive Stirling Engine Development Project

Science.gov (United States)

Ernst, William D.; Shaltens, Richard K.

1997-01-01

The development and verification of automotive Stirling engine (ASE) component and system technology is described as it evolved through two experimental engine designs: the Mod 1 and the Mod 2. Engine operation and performance and endurance test results for the Mod 1 are summarized. Mod 2 engine and component development progress is traced from the original design through hardware development, laboratory test, and vehicle installation. More than 21,000 hr of testing were accomplished, including 4800 hr with vehicles that were driven more dm 59,000 miles. Mod 2 engine dynamometer tests demonstrated that the engine system configuration had accomplished its performance goals for power (60 kW) and efficiency (38.5%) to within a few percent. Tests with the Mod 2 engine installed in a delivery van demonstrated combined metro-highway fuel economy improvements consistent with engine performance goals and the potential for low emission levels. A modified version of the Mod 2 has been identified as a manufacturable design for an ASE. As part of the ASE project, the Industry Test and Evaluation Program (ITEP), NASA Technology Utilization (TU) project, and the industry-funded Stirling Natural Gas Engine program were undertaken to transfer ASE technology to end users. The results of these technology transfer efforts are also summarized.

West Virginia peer exchange : streamlining highway safety improvement program project delivery.

Science.gov (United States)

2015-01-01

The West Virginia Division of Highways (WV DOH) hosted a Peer Exchange to share information and experiences : for streamlining Highway Safety Improvement Program (HSIP) project delivery. The event was held September : 22 to 23, 2014 in Charleston, We...

Nuclear engineering education in the United States: a status report

International Nuclear Information System (INIS)

Miller, D.W.; Spinrad, B.I.

1986-01-01

The executive summary of the White Paper entitled The Revitalization of Nuclear Energy Education in the United States is the major component of this paper. The White Paper was completed under the auspices of the Nuclear Engineering Department Heads Organization (NEDHO). The presentation highlights events and program changes that have occurred in 1985-1986 following publication of the NEDHO White Paper. Many of these events provide optimism for the revitalization of nuclear engineering education

Blowing dust and highway safety in the southwestern United States: Characteristics of dust emission "hotspots" and management implications.

Science.gov (United States)

Li, Junran; Kandakji, Tarek; Lee, Jeffrey A; Tatarko, John; Blackwell, John; Gill, Thomas E; Collins, Joe D

2018-04-15

Despite the widespread media attention of chain-reaction traffic incidents and property damage caused by windblown dust in the U.S. and elsewhere in the world, very few studies have provided in-depth analysis on this issue. Remote sensing and field observations reveal that wind erosion in the southwestern U.S. typically occurs in localized source areas, characterized as "hotspots", while most of the landscape is not eroding. In this study, we identified the spatial and temporal distribution patterns of hotspots that may contribute dust blowing onto highways in the southwestern U.S. We further classified the hotspots for the potential of blowing dust production based upon field observations and wind erosion modeling. Results of land use and land cover show that shrubland, grassland, and cropland accounted for 42%, 31%, and 21% of the overall study area, respectively. However, of the 620 total hotspots identified, 164 (26%), 141 (22%), and 234 (38%) are located on shrubland, grassland, and cropland, respectively. Barren land represented 0.9% of the land area but 8% of the dust hotspots. While a majority of these hotspots are located close to highways, we focused on 55 of them, which are located hotspot sites are dominated by sand and silt particles with threshold shear velocities ranging from 0.17-0.78m s -1 , largely depending on the land use of the hotspot sites. Dust emission modeling showed that 13 hotspot sites could produce annual emissions >3.79kg m -2 , yielding highly hazardous dust emissions to ground transportation with visibility hotspots are critical information for highway authorities to make informed and timely management decisions when wind events strike. Copyright © 2017 Elsevier B.V. All rights reserved.

An optimization model for improving highway safety

Directory of Open Access Journals (Sweden)

Promothes Saha

2016-12-01

Full Text Available This paper developed a traffic safety management system (TSMS for improving safety on county paved roads in Wyoming. TSMS is a strategic and systematic process to improve safety of roadway network. When funding is limited, it is important to identify the best combination of safety improvement projects to provide the most benefits to society in terms of crash reduction. The factors included in the proposed optimization model are annual safety budget, roadway inventory, roadway functional classification, historical crashes, safety improvement countermeasures, cost and crash reduction factors (CRFs associated with safety improvement countermeasures, and average daily traffics (ADTs. This paper demonstrated how the proposed model can identify the best combination of safety improvement projects to maximize the safety benefits in terms of reducing overall crash frequency. Although the proposed methodology was implemented on the county paved road network of Wyoming, it could be easily modified for potential implementation on the Wyoming state highway system. Other states can also benefit by implementing a similar program within their jurisdictions.

Engineering topological edge states in two dimensional magnetic photonic crystal

Science.gov (United States)

Yang, Bing; Wu, Tong; Zhang, Xiangdong

2017-01-01

Based on a perturbative approach, we propose a simple and efficient method to engineer the topological edge states in two dimensional magnetic photonic crystals. The topological edge states in the microstructures can be constructed and varied by altering the parameters of the microstructure according to the field-energy distributions of the Bloch states at the related Bloch wave vectors. The validity of the proposed method has been demonstrated by exact numerical calculations through three concrete examples. Our method makes the topological edge states "designable."

Engineering squeezed states of microwave radiation with circuit quantum electrodynamics

International Nuclear Information System (INIS)

Li Pengbo; Li Fuli

2011-01-01

We introduce a squeezed state source for microwave radiation with tunable parameters in circuit quantum electrodynamics. We show that when a superconducting artificial multilevel atom interacting with a transmission line resonator is suitably driven by external classical fields, two-mode squeezed states of the cavity modes can be engineered in a controllable fashion from the vacuum state via adiabatic following of the ground state of the system. This scheme appears to be robust against decoherence and is realizable with present techniques in circuit quantum electrodynamics.

Simulation of physical development because affected by the construction of the highway

Directory of Open Access Journals (Sweden)

Damjan Bačnar

2002-01-01

Full Text Available The procedure for planning highways entails evaluation of possibilities the purpose being selection of the optimal one. In the procedure certain criteria are applied, amongst other evaluation of influences on regional and urban development. Despite the set criteria the chosen route is often contrary to development goals of cities and wider areas – regions, which it affects. The article presents possibilities of using models of effects of highways on settlement development for forecasting consequences of construction. The model is based on knowledge of effects of already built highways, examples of analysed highway exits are shown with settlement growth. Spatial models are useful tools for forecasting physical changes and simulating effects of projects on physical development or its particular elements.

Highway renewable energy : photovoltaic noise barriers

Science.gov (United States)

2017-07-01

Highway photovoltaic noise barriers (PVNBs) represent the combination of noise barrier systems and photovoltaic systems in order to mitigate traffic noise while simultaneously producing renewable energy. First deployed in Switzerland in 1989, PVNBs a...

Transition curves for highway geometric design

CERN Document Server

Kobryń, Andrzej

2017-01-01

This book provides concise descriptions of the various solutions of transition curves, which can be used in geometric design of roads and highways. It presents mathematical methods and curvature functions for defining transition curves. .

76 FR 7196 - California State Nonroad Engine Pollution Control Standards; Request for Authorization of...

Science.gov (United States)

2011-02-09

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9264-4] California State Nonroad Engine Pollution Control Standards; Request for Authorization of Airborne Toxic Control Measure for In-Use Portable Diesel Engines 50... for In-Use Strategies to Control Emissions from Diesel Engines,'' 13 California Code of Regulations...

Effects of Highway Road Salting on the Water Quality of Selected Streams in Chittenden County, Vermont, November 2005-2007

Science.gov (United States)

Denner, Jon C.; Clark, Stewart F.; Smith, Thor E.; Medalie, Laura

2010-01-01

A study of road-deicing chloride (Cl) concentrations and loads was conducted at three streams in Chittenden County, VT, from November 2005 to 2007. This study was done by the U.S. Geological Survey, in cooperation with the Vermont Agency of Transportation. The streams, Alder Brook, Allen Brook, and Mill Brook, were selected to represent different land uses in the upstream watershed, different road types and densities, and different geometric patterns of the roadway draining to the receiving stream to assess the relative contribution of and differences in state road-salt applications to stream Cl concentrations and loads. Water-quality samples were collected and specific conductance was measured continuously at paired stations upstream and downstream from State highways and related to Cl concentrations to assist in determining the effects of road-salting operations during winter maintenance on the levels of Cl in the streams. Mean concentrations of Cl ranged from 8.2 to 72 mg/L (milligrams per liter) in the water-quality samples collected at sampling stations upstream from State highway bridges and from 7.9 to 80 mg/L in those collected at sampling stations downstream of highway bridges. Mean Cl loads ranged from 1,100 to 4,090 lb/d (pounds per day) at upstream stations and from 1,110 to 4,200 lb/d at downstream stations. Estimated mean annual Cl loads ranged from 402,000 to 1,490,000 lb/yr (pounds per year) at upstream stations and from 405,000 to 1,530,000 lb/yr at downstream stations. Mean Cl concentrations in samples collected at the three paired stations were lowest at Mill Brook at VT 117 near Essex Junction, VT (7.9 mg/L) and highest at Allen Brook at VT 2A near Essex Junction, VT (80.7 mg/L). None of the monitored Cl concentrations in the water-quality samples collected at the three paired sampling stations exceeded either of the U.S. Environmental Protection Agency's (USEPA) recommended chronic and acute Cl toxicity criteria of 230 and 860 mg

Engineering Ethics Education : Its Necessity, Objectives, Methods, Current State, and Challenges

Science.gov (United States)

Fudano, Jun

The importance of engineering ethics education has become widely recognized in the industrialized countries including Japan. This paper examines the background against which engineering ethics education is required, and reviews its objectives, methods, and challenges, as well as its current state. In pointing out important issues associated with the apparent acceptance and quantitative development of ethics education, especially after the establishment of the Japan Accreditation Board for Engineering Education in 1999, the author stresses that the most serious problem is the lack of common understanding on the objectives of engineering ethics education. As a strategy to improve the situation, the so-called “Ethics-across-the-Curriculum” approach is introduced. The author also claims that business/organization ethics which is consistent with engineering ethics should be promoted in Japan.

BR-319: Brazil's Manaus-Porto Velho highway and the potential impact of linking the arc of deforestation to central amazonia.

Science.gov (United States)

Fearnside, Philip M; de Alencastro Graça, Paulo Maurício Lima

2006-11-01

Brazil's BR-319 Highway linked Manaus, in the state of Amazonas, to Porto Velho, Rondônia, until it became impassable in 1988. Now it is proposed for reconstruction and paving, which would facilitate migration from the "Arc of Deforestation" in the southern part of the Amazon region to new frontiers farther north. The purpose of the highway, which is to facilitate transport to São Paulo of products from factories in the Manaus Free Trade Zone, would be better served by sending the containers by ship to the port of Santos. The lack of a land connection to Manaus currently represents a significant barrier to migration to central and northern Amazonia. Discourse regarding the highway systematically overestimates the highway's benefits and underestimates its impacts. A variety of changes would be needed prior to paving the highway if these potential impacts are to be attenuated. These include zoning, reserve creation, and increased governance in various forms, including deforestation licensing and control programs. More fundamental changes are also needed, especially the abandonment of the long-standing tradition in Brazil of granting squatters' rights to those who invade public land. Organizing Amazonian occupation in such a way that road construction and improvement cease to lead to explosive and uncontrolled deforestation should be a prerequisite for approval of the BR-319 and other road projects for which major impacts are expected. These projects could provide the impetus that is needed to achieve the transition away from appropriation of public land by both small squatters and by grileiros (large-scale illegal claimants). A delay in reconstructing the highway is advisable until appropriate changes can be effected.

Kentucky's highway incident management strategic plan.

Science.gov (United States)

2005-06-01

Kentucky s Highway Incident Management Strategic Plan consists of a mission statement, 4 goals, 16 objectives, and 49 action strategies. The action strategies are arranged by priority and recommended time frame for implementation. When implemented...

The M77 Highway: saving lives and money.

Science.gov (United States)

Crane, Evan O T; Augustine, Angelica; Tait, Gavin R

2008-09-01

Upgrading of a stretch of the A77, a major road in South West Scotland to Highway status has resulted in a significant reduction in the incidence of serious and fatal road traffic accidents on a major international route. Notwithstanding the pain and suffering prevented, the annual economic savings amount to over pound 6.1 Million ($12.14 M/euro 7.96 M) The Highway, with an effective central reservation barrier, will pay for itself in 17 years and will continue to prevent serious injury and save lives.

Causative factors of cost overrun in highway projects of Sindh province of Pakistan

Science.gov (United States)

Sohu, S.; Halid, A.; Nagapan, S.; Fattah, A.; Latif, I.; Ullah, K.

2017-11-01

Cost overrun is an increase of cost of project from approved budget which was signed by parties at the time of tender. Cost overrun in construction of highway projects is a common problem worldwide and construction industry of Pakistan is also facing this crucial problem of cost overrun in highway projects of Pakistan. The main objective of this research is to identify the causative factors of cost overrun in highway projects of Sindh province of Pakistan. A well designed questionnaire was developed based on 64 common factors of cost overrun from literature review. Developed questionnaire was distributed among selected 30 experts from owner/client, designer/consultant and contractor who have experience more than 20 years’ experience in highway projects. The collected data was statistical analyzed. After analysis results showed that delay process in payment by client, inadequate planning, client interference, poor contract management, delay of decision making, change of scope of project and financial problems faced by client were most causative factors of cost overrun in highway projects. This research will provide alertness to stakeholders of highway projects of Sindh province to avoid cost overrun in projects.

Artificial potential functions for highway driving with collision avoidance

OpenAIRE

Wolf , Michael T.; Burdick, Joel W.

2008-01-01

We present a set of potential function components to assist an automated or semi-automated vehicle in navigating a multi-lane, populated highway. The resulting potential field is constructed as a superposition of disparate functions for lane- keeping, road-staying, speed preference, and vehicle avoidance and passing. The construction of the vehicle avoidance potential is of primary importance, incorporating the structure and protocol of laned highway driving. Particularly, the shape and dimen...

A demonstration of expert systems applications in transportation engineering : volume II, TRANZ, a prototype expert system for traffic control in highway work zones.

Science.gov (United States)

1988-01-01

The development of a prototype knowledge-based expert system (KBES) for selecting appropriate traffic control strategies and management techniques around highway work zones was initiated. This process was encompassed by the steps that formulate the p...

A Novel Beamforming Technique for Highways Coverage Using High-Altitude Platforms

Directory of Open Access Journals (Sweden)

Yasser Albagory

2007-01-01

Full Text Available This paper proposes a novel beamforming technique to form an arbitrary-shaped cell for the high-altitude platforms (HAPs mobile communications. The new technique is based on pattern summation of individual low-sidelobe, narrow beams which constitute the desired cell pattern weighted by an amplitude correcting function. The new cell pattern can be adapted to cover the main highways forming worm-shaped cells which may cover the highway for long distances up to 100 km and it will have an important role in reducing frequent handoffs and signaling traffic of location updating from moving users over the long highways.

Energy Beam Highways Through the Skies

Science.gov (United States)

Myrabo, Leik N.

1996-01-01

The emergence of Energy Beam Flight Transportation Systems could dramatically change the way we travel in the 21st Century. A framework for formulating 'Highways of Light' and the top level architectures that invoke radically new Space Power Grid infrastructure, are introduced. Basically, such flight systems, hereafter called Lightcraft, would employ off-board energy beam sources (either laser or microwave) to energize on-board dependent 'motors' -- instead of the traditional autonomous 'engines' with their on-board energy sources (e.g., chemical fuels). Extreme reductions in vehicle dry mass appear feasible with the use of off-board power and a high degree of on-board artificial intelligence. Such vehicles may no longer need airports for refueling (since they require no propellant), and could possibly pick up travelers at their homes -- before motoring over to one of many local boost stations, for the flight out. With off-board power, hyper-energetic acceleration performance and boost-glide trajectories become feasible. Hypersonic MS airbreathing propulsion can enable boosts up to twice escape velocity, which will cut trip times to the moon down to 5.5 hours. The predominant technological, environmental and social factors that will result from such transportation systems will be stressed. This presentation first introduces the remote source siting options for the space power system infrastructure, and then provides three representative laser/microwave Lightcraft options (derived from historical Case Studies): i.e., 'Acorn', 'Toy Top', and 'Disc.' Next the gamut of combined-cycle engine options developed for these Lightcraft are examined -- to illuminate the 'emerging technologies' that must be harnessed to produce flight hardware. Needed proof-of concept experiments are identified, along with the Macro-Level Issues that can springboard these revolutionary concepts into hardware reality.

40 CFR 1048.505 - How do I test engines using steady-state duty cycles, including ramped-modal testing?

Science.gov (United States)

2010-07-01

...-state duty cycles, including ramped-modal testing? 1048.505 Section 1048.505 Protection of Environment... SPARK-IGNITION ENGINES Test Procedures § 1048.505 How do I test engines using steady-state duty cycles... some cases, we allow you to choose the appropriate steady-state duty cycle for an engine. In these...

Short-term impacts of a 4-lane highway on black bears in eastern North Carolina

Science.gov (United States)

Van Manen, Frank T.; McCollister, Matthew F.; Nicholson, Jeremy M.; Thompson, Laura M.; Kindall, Jason L.; Jones, Mark D.

2012-01-01

Among numerous anthropogenic impacts on terrestrial landscapes, expanding transportation networks represent one of the primary challenges to wildlife conservation worldwide. Larger mammals may be particularly vulnerable because of typically low densities, low reproductive rates, and extensive movements. Although numerous studies have been conducted to document impacts of road networks on wildlife, inference has been limited because of experimental design limitations. During the last decade, the North Carolina Department of Transportation (NCDOT) rerouted and upgraded sections of United States Highway 64 between Raleigh and the Outer Banks to a 4-lane, divided highway. A new route was selected for a 24.1-km section in Washington County. The new section of highway included 3 wildlife underpasses with adjacent wildlife fencing to mitigate the effects of the highway on wildlife, particularly American black bears (Ursus americanus). We assessed the short-term impacts of the new highway on spatial ecology, population size, survival, occupancy, and gene flow of black bears. We tested our research hypotheses using a before-after control-impact (BACI) study design. We collected data during 2000–2001 (preconstruction phase) and 2006–2007 (postconstruction phase) in the highway project area and a nearby control area (each approx. 11,000 ha), resulting in 4 groups of data (i.e., pre- or postconstruction study phase, treatment or control area). We captured and radiocollared 57 bears and collected 5,775 hourly locations and 4,998 daily locations. Using mixed-model analysis of variance and logistic regression, we detected no differences in home ranges, movement characteristics, proximity to the highway alignment, or habitat use between the 2 study phases, although minimum detectable effect sizes were large for several tests. However, after completion of the new highway, bears on the treatment area became less inactive in morning, when highway traffic was low, compared with

Threshold Research on Highway Length under Typical Landscape Patterns Based on Drivers’ Physiological Performance

Directory of Open Access Journals (Sweden)

Xia Zhao

2015-01-01

Full Text Available The appropriately landscaped highway scenes may not only help improve road safety and comfort but also help protect ecological environment. Yet there is very little research data on highway length threshold with consideration of distinctive landscape patterns. Against this backdrop, the paper aims to quantitatively analyze highway landscape’s effect on driving behavior based on drivers’ physiological performance and quantify highway length thresholds under three typical landscape patterns, namely, “open,” “semiopen,” and “vertical” ones. The statistical analysis was based on data collected in a driving simulator and electrocardiograph. Specifically, vehicle-related data, ECG data, and supplemental subjective stress perception were collected. The study extracted two characteristic indices, lane deviation and LF/HF, and extrapolated the drivers’ U-shaped physiological response to landscape patterns. Models on highway length were built based on LF/HF’s variation trend with highway length. The results revealed that the theoretical highway length threshold tended to increase when the landscape pattern was switched to open, semiopen, and vertical ones. And the reliability and accuracy of the results were validated by questionnaires and field operational tests. Findings from this research will assist practitioners in taking active environmental countermeasures pertaining to different roadside landscape patterns.

A Data Filter for Identifying Steady-State Operating Points in Engine Flight Data for Condition Monitoring Applications

Science.gov (United States)

Simon, Donald L.; Litt, Jonathan S.

2010-01-01

This paper presents an algorithm that automatically identifies and extracts steady-state engine operating points from engine flight data. It calculates the mean and standard deviation of select parameters contained in the incoming flight data stream. If the standard deviation of the data falls below defined constraints, the engine is assumed to be at a steady-state operating point, and the mean measurement data at that point are archived for subsequent condition monitoring purposes. The fundamental design of the steady-state data filter is completely generic and applicable for any dynamic system. Additional domain-specific logic constraints are applied to reduce data outliers and variance within the collected steady-state data. The filter is designed for on-line real-time processing of streaming data as opposed to post-processing of the data in batch mode. Results of applying the steady-state data filter to recorded helicopter engine flight data are shown, demonstrating its utility for engine condition monitoring applications.

23 CFR Appendix C to Subpart A of... - Federal-Aid Highway Contractors Annual EEO Report (Form PR-1391)

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Federal-Aid Highway Contractors Annual EEO Report (Form PR-1391) C Appendix C to Subpart A of Part 230 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF... Part 230—Federal-Aid Highway Contractors Annual EEO Report (Form PR-1391) EC14OC91.000 ...

Quantum engineering. Confining the state of light to a quantum manifold by engineered two-photon loss.

Science.gov (United States)

Leghtas, Z; Touzard, S; Pop, I M; Kou, A; Vlastakis, B; Petrenko, A; Sliwa, K M; Narla, A; Shankar, S; Hatridge, M J; Reagor, M; Frunzio, L; Schoelkopf, R J; Mirrahimi, M; Devoret, M H

2015-02-20

Physical systems usually exhibit quantum behavior, such as superpositions and entanglement, only when they are sufficiently decoupled from a lossy environment. Paradoxically, a specially engineered interaction with the environment can become a resource for the generation and protection of quantum states. This notion can be generalized to the confinement of a system into a manifold of quantum states, consisting of all coherent superpositions of multiple stable steady states. We have confined the state of a superconducting resonator to the quantum manifold spanned by two coherent states of opposite phases and have observed a Schrödinger cat state spontaneously squeeze out of vacuum before decaying into a classical mixture. This experiment points toward robustly encoding quantum information in multidimensional steady-state manifolds. Copyright © 2015, American Association for the Advancement of Science.

Adaptive Model Predictive Control of Diesel Engine Selective Catalytic Reduction (SCR) Systems

Science.gov (United States)

McKinley, Thomas L.

2009-01-01

Selective catalytic reduction or SCR is coming into worldwide use for diesel engine emissions reduction for on- and off-highway vehicles. These applications are characterized by broad operating range as well as rapid and unpredictable changes in operating conditions. Significant nonlinearity, input and output constraints, and stringent performance…

Fog detection for interstate and state highways.

Science.gov (United States)

2012-12-01

Fog is a common and recurrent phenomenon in West Virginia which is the cause of nearly 1.3% of all fatal crashes : occurring all over the state. All three types of fog are common in the state which results in lack visibility, limited : contrast, dist...

POLYCYCLIC AROMATIC HYDROCARBON CONTAMINATION LEVELS IN COLLECTED SAMPLES FROM VICINITY OF A HIGHWAY

Directory of Open Access Journals (Sweden)

S. V. Samimi ، R. Akbari Rad ، F. Ghanizadeh

2009-01-01

Full Text Available Tehran as the biggest city of Iran with a population of more than 10 millions has potentially high pollutant exposures of gas oil and gasoline combustion from vehicles that are commuting in the highways every day. The vehicle exhausts contain polycyclic aromatic hydrocarbons, which are produced by incomplete combustion and can be directly deposited in the environment. In the present study, the presence of polycyclic aromatic hydrocarbons contamination in the collected samples of a western highway in Tehran was investigated. The studied location was a busy highway in Tehran. High performance liquid chromatography equipped with florescence detector was used for determination of polycyclic aromatic hydrocarbons concentrations in the studied samples. Total concentration of the ten studied polycyclic aromatic hydrocarbons compounds ranged from 11107 to 24342 ng/g dry weight in the dust samples and increased from 164 to 2886 ng/g dry weight in the soil samples taken from 300 m and middle of the highway, respectively. Also the average of Σ PAHs was 1759 ng/L in the water samples of pools in parks near the highway. The obtained results indicated that polycyclic aromatic hydrocarbons contamination levels were very high in the vicinity of the highway.

Effect of chronic nonmalignant pain on highway driving performance.

Science.gov (United States)

Veldhuijzen, D S; van Wijck, A J M; Wille, F; Verster, J C; Kenemans, J L; Kalkman, C J; Olivier, B; Volkerts, E R

2006-05-01

Most pain patients are treated in an outpatient setting and are engaged in daily activities including driving. Since several studies showed that cognitive functioning may be impaired in chronic nonmalignant pain, the question arises whether or not chronic nonmalignant pain affects driving performance. Therefore, the objective of the present study was to determine the effects of chronic nonmalignant pain on actual highway driving performance during normal traffic. Fourteen patients with chronic nonmalignant pain and 14 healthy controls, matched on age, educational level, and driving experience, participated in the study. Participants performed a standardized on-the-road driving test during normal traffic, on a primary highway. The primary parameter of the driving test is the Standard Deviation of Lateral Position (SDLP). In addition, driving-related skills (tracking, divided attention, and memory) were examined in the laboratory. Subjective assessments, such as pain intensity, and subjective driving quality, were rated on visual analogue scales. The results demonstrated that a subset of chronic nonmalignant pain patients had SDLPs that were higher than the matched healthy controls, indicating worse highway driving performance. Overall, there was a statistically significant difference in highway driving performance between the groups. Further, chronic nonmalignant pain patients rated their subjective driving quality to be normal, although their ratings were significantly lower than those of the healthy controls. No significant effects were found on the laboratory tests.

EU member states' voting for authorizing genetically engineered crops

NARCIS (Netherlands)

Smart, Richard D.; Blum, Matthias; Wesseler, Justus

2015-01-01

Several authors suggest a gridlock of the European Union's (EU's) approval process for genetically engineered (GE) crops. We analyse the voting behaviour of EU Member States (MSs) for voting results from 2003 to 2015 on the approval of GE crops to test for a gridlock; no reliable data are

Least-Present-Value-of-Revenue Auctions and Highway Franchising

OpenAIRE

Eduardo M.R.A. Engel; Ronald D. Fischer; Alexander Galetovic

1998-01-01

In recent years several countries have started massive highway franchising programs auctioned to private firms. In these auctions, the regulator typically sets the franchise term and firms bid on tolls, or, alternatively, the regulator sets tolls and the winner is the firm that asks for the shortest franchise term. In this paper we argue that many of the problems that highway franchises have encountered are due to the fact that the franchise term cannot adjust to demand realizations. We propo...

26 CFR 41.4482(a)-1 - Definition of highway motor vehicle.

Science.gov (United States)

2010-04-01

... of its own motor, whether such motor is powered by gasoline, diesel fuel, special motor fuels... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Definition of highway motor vehicle. 41.4482(a... (CONTINUED) MISCELLANEOUS EXCISE TAXES EXCISE TAX ON USE OF CERTAIN HIGHWAY MOTOR VEHICLES Tax on Use of...

Lead concentrations and reproduction in highway-nesting barn swallows

Science.gov (United States)

Grue, C.E.; O'Shea, T.J.; Hoffman, D.J.

1984-01-01

Swallows (Hirundo rustica) collected within the right-of-way of a major Maryland highway were greater than those found in Barn Swallows nesting within a rural area. Lead concentrations in the feathers of adults from the highway colony were also greater than Lead concentrations in the carcasses and stomach contents of adult and nestling Barn those of rural adults, but concentrations in the feathers of nestlings from the two locations were similar. Activity of u-aminolevulinic acid dehydratase in red blood cells was lower in highway-nesting adults and their young than in their rural counterparts, although hemoglobin concentrations and hematocrits did not differ. The number of eggs, nestlings, and body weights of the latter at 16-18 days of age were similar in the two colonies, as were body weights of adults from the two areas. These results suggest that contamination of roadside habitats by lead from automotive emissions does not pose a serious hazard to birds that are aerial feeders.

Jackson State University (JSU)’s Center of Excellence in Science, Technology, Engineering, and Mathematics Education (CESTEME)

Science.gov (United States)

2016-01-08

Actuarial Science Taylor, Triniti Lanier Alcorn State University Animal Science Tchounwou, Hervey Madison Central Jackson State University Computer...for Public Release; Distribution Unlimited Final Report: Jackson State University (JSU)’s Center of Excellence in Science , Technology, Engineering...Final Report: Jackson State University (JSU)’s Center of Excellence in Science , Technology, Engineering, and Mathematics Education (CESTEME) Report

Assessing the role of pavement macrotexture in preventing crashes on highways.

Science.gov (United States)

Pulugurtha, Srinivas S; Kusam, Prasanna R; Patel, Kuvleshay J

2010-02-01

The objective of this article is to assess the role of pavement macrotexture in preventing crashes on highways in the State of North Carolina. Laser profilometer data obtained from the North Carolina Department of Transportation (NCDOT) for highways comprising four corridors are processed to calculate pavement macrotexture at 100-m (approximately 330-ft) sections according to the American Society for Testing and Materials (ASTM) standards. Crash data collected over the same lengths of the corridors were integrated with the calculated pavement macrotexture for each section. Scatterplots were generated to assess the role of pavement macrotexture on crashes and logarithm of crashes. Regression analyses were conducted by considering predictor variables such as million vehicle miles of travel (as a function of traffic volume and length), the number of interchanges, the number of at-grade intersections, the number of grade-separated interchanges, and the number of bridges, culverts, and overhead signs along with pavement macrotexture to study the statistical significance of relationship between pavement macrotexture and crashes (both linear and log-linear) when compared to other predictor variables. Scatterplots and regression analysis conducted indicate a more statistically significant relationship between pavement macrotexture and logarithm of crashes than between pavement macrotexture and crashes. The coefficient for pavement macrotexture, in general, is negative, indicating that the number of crashes or logarithm of crashes decreases as it increases. The relation between pavement macrotexture and logarithm of crashes is generally stronger than between most other predictor variables and crashes or logarithm of crashes. Based on results obtained, it can be concluded that maintaining pavement macrotexture greater than or equal to 1.524 mm (0.06 in.) as a threshold limit would possibly reduce crashes and provide safe transportation to road users on highways.

Performance analysis of Brazilian highways under concession through the capacity and level of service

Energy Technology Data Exchange (ETDEWEB)

Silveira Santos, T.; Martins Ribeiro, P.C.

2016-07-01

This paper proposes the development of a methodology to analyze the performance of highways under concession through the capacity and level of service, with special attention to Brazilian highways. The trajectory of transport infrastructure provision in Brazil and its performance assessment framework are mentioned, as well as an approach of the level of service concept and the Highway Capacity Manual (HCM). An inventory of the highway with the necessary data to the model is proposed. This database should incorporate information from multiple data sources and its use will be important for the processing and compilation of raw data in order to structure a full informational basis. Then, it is developed a method for segmentation of homogeneous road sections, as conceptualized by HCM, and proposed a way of level of service measurement. Finally, there are analysis of the use of HCM in some highways concession programs in Brazil. (Author)

Geospatial and machine learning techniques for wicked social science problems: analysis of crash severity on a regional highway corridor

Science.gov (United States)

Effati, Meysam; Thill, Jean-Claude; Shabani, Shahin

2015-04-01

The contention of this paper is that many social science research problems are too "wicked" to be suitably studied using conventional statistical and regression-based methods of data analysis. This paper argues that an integrated geospatial approach based on methods of machine learning is well suited to this purpose. Recognizing the intrinsic wickedness of traffic safety issues, such approach is used to unravel the complexity of traffic crash severity on highway corridors as an example of such problems. The support vector machine (SVM) and coactive neuro-fuzzy inference system (CANFIS) algorithms are tested as inferential engines to predict crash severity and uncover spatial and non-spatial factors that systematically relate to crash severity, while a sensitivity analysis is conducted to determine the relative influence of crash severity factors. Different specifications of the two methods are implemented, trained, and evaluated against crash events recorded over a 4-year period on a regional highway corridor in Northern Iran. Overall, the SVM model outperforms CANFIS by a notable margin. The combined use of spatial analysis and artificial intelligence is effective at identifying leading factors of crash severity, while explicitly accounting for spatial dependence and spatial heterogeneity effects. Thanks to the demonstrated effectiveness of a sensitivity analysis, this approach produces comprehensive results that are consistent with existing traffic safety theories and supports the prioritization of effective safety measures that are geographically targeted and behaviorally sound on regional highway corridors.

By ship, by barge, by truck : massive Kearl modules to take a new route from South Korea to Alberta via Idaho and Montana highways

Energy Technology Data Exchange (ETDEWEB)

Jaremko, D.

2010-03-15

Idaho and Montana highways will be used to transport massive oil sands modules for Imperial Oil's Kearl oilsands project. A test module will pass through the states in mid 2010. The local highway patrol will be contracted as an escort in order to reduce the risk of incidents with local drivers. The modules will be shipped from South Korea to Portland and then transported by barge to Lewiston, Idaho. The modules will then be loaded onto trucks and transported along the highway. It will take approximately 10 days to move the modules to the Kearl site near Fort McMurray, Alberta. The loads are so large that they will not fit through rail tunnels or highway overpasses. Imperial Oil will be required to bury some overhead power transmission lines and build approximately 100 pullouts along the route. Traffic signal arms will also be modified to swing out of the way as the loads are passing through. Construction of the Kearl site will be completed by 2012. 2 figs.

Engineering two-photon high-dimensional states through quantum interference

Science.gov (United States)

Zhang, Yingwen; Roux, Filippus S.; Konrad, Thomas; Agnew, Megan; Leach, Jonathan; Forbes, Andrew

2016-01-01

Many protocols in quantum science, for example, linear optical quantum computing, require access to large-scale entangled quantum states. Such systems can be realized through many-particle qubits, but this approach often suffers from scalability problems. An alternative strategy is to consider a lesser number of particles that exist in high-dimensional states. The spatial modes of light are one such candidate that provides access to high-dimensional quantum states, and thus they increase the storage and processing potential of quantum information systems. We demonstrate the controlled engineering of two-photon high-dimensional states entangled in their orbital angular momentum through Hong-Ou-Mandel interference. We prepare a large range of high-dimensional entangled states and implement precise quantum state filtering. We characterize the full quantum state before and after the filter, and are thus able to determine that only the antisymmetric component of the initial state remains. This work paves the way for high-dimensional processing and communication of multiphoton quantum states, for example, in teleportation beyond qubits. PMID:26933685

Understanding Customer Product Choices: A Case Study Using the Analytical Hierarchy Process

Science.gov (United States)

Robert L. Smith; Robert J. Bush; Daniel L. Schmoldt

1996-01-01

The Analytical Hierarchy Process (AHP) was used to characterize the bridge material selection decisions of highway officials across the United States. Understanding product choices by utilizing the AHP allowed us to develop strategies for increasing the use of timber in bridge construction. State Department of Transportation engineers, private consulting engineers, and...

Model-Based State Feedback Controller Design for a Turbocharged Diesel Engine with an EGR System

Directory of Open Access Journals (Sweden)

Tianpu Dong

2015-05-01

Full Text Available This paper describes a method for the control of transient exhaust gas recirculation (EGR systems. Firstly, a state space model of the air system is developed by simplifying a mean value model. The state space model is linearized by using linearization theory and validated by the GT-Power data with an operating point of the diesel engine. Secondly, a state feedback controller based on the intake oxygen mass fraction is designed for EGR control. Since direct measurement of the intake oxygen mass fraction is unavailable on the engine, the estimation method for intake oxygen mass fraction has been proposed in this paper. The control strategy is analyzed by using co-simulation with the Matlab/Simulink and GT-Powers software. Finally, the whole control system is experimentally validated against experimental data of a turbocharged diesel engine. The control effect of the state feedback controller compared with PID controller proved to be further verify the feasibility and advantages of the proposed state feedback controller.

Spatial, road geometric, and biotic factors associated with Barn Owl mortality along an interstate highway

Science.gov (United States)

Arnold, Erin M.; Hanser, Steven E.; Regan, Tempe; Thompson, Jeremy; Lowe, Melinda; Kociolek, Angela; Belthoff, James R.

2018-01-01

Highway programs typically focus on reducing vehicle collisions with large mammals because of economic or safety reasons while overlooking the millions of birds that die annually from traffic. We studied wildlife‐vehicle collisions along an interstate highway in southern Idaho, USA, with among the highest reported rates of American Barn Owl Tyto furcata road mortality. Carcass data from systematic and ad hoc surveys conducted in 2004–2006 and 2013–2015 were used to explore the extent to which spatial, road geometric, and biotic factors explained Barn Owl‐vehicle collisions. Barn Owls outnumbered all other identified vertebrate species of roadkill and represented > 25% of individuals and 73.6% of road‐killed birds. At a 1‐km highway segment scale, the number of dead Barn Owls decreased with increasing numbers of human structures, cumulative length of secondary roads near the highway, and width of the highway median. Number of dead Barn Owls increased with higher commercial average annual daily traffic (CAADT), small mammal abundance index, and with grass rather than shrubs in the roadside verge. The small mammal abundance index was also greater in roadsides with grass versus mixed shrubs, suggesting that Barn Owls may be attracted to grassy portions of the highway with more abundant small mammals for hunting prey. When assessed at a 3‐km highway segment scale, the number of dead Barn Owls again increased with higher CAADT as well as with greater numbers of dairy farms. At a 5‐km scale, number of dead Barn Owls increased with greater percentage of cropland near the highway. While human conversion of the environment from natural shrub‐steppe to irrigated agriculture in this region of Idaho has likely enhanced habitat for Barns Owls, it simultaneously has increased risk for owl‐vehicle collisions where an interstate highway traverses the altered landscape. We review some approaches for highway mitigation and suggest that reducing wildlife�

INSAR For Early Warning Of Possible Highway Instability Over Undermined Area Of Ostrava

Science.gov (United States)

Lazecky, Milan; Kacmarik, Michal; Rapant, Petr

2012-01-01

A part of czech highway D1 connecting Ostrava with Prague and Poland, is built over an undermined area of Ostrava-Svinov. Since the end of 2010, this part of the highway is fully operational. Because of undermining, a subsidence can be expected, however with a very slow rate since the mines are no more active in this area. Several TerraSAR-X images from 2011 are investigated interferometrically in order to estimate a precise deformation model. Subjects of interest are movements of newly built highway bridges, banks and close neighbourhood. Existing C-band multitemporal InSAR processing results of ERS and Envisat are available from an earlier period that reveil a slow trend of residual subsidence. In this project, InSAR will be investigated as a tool for an early warning for highway stability.

Improved traffic control measures to prevent incorrect turns at highway-rail grade crossings.

Science.gov (United States)

2013-11-01

A number of injuries and fatal collisions have occurred at certain highway-rail grade crossings that are located immediately adjacent to highway intersections, driveways or interstate ramps. Some guide signage, pavement markings, and other traffic co...

Illinois highway materials sustainability efforts of 2015.

Science.gov (United States)

2016-08-01

This report provides a summary of the sustainability efforts of the Illinois Department of Transportation (IDOT) in recycling : reclaimed materials in highway construction during calendar year 2015. This report meets the requirements of Illinois Publ...

Highway runoff in areas of karst topography.

Science.gov (United States)

2004-01-01

Karst terrain is characterized by sinkholes, depressions, caves, and underground drainage, generally underlain by soluble rocks such as limestone and dolomite. Because natural filtration through soil is limited in karst areas, pollutants in highway s...

Illinois highway materials sustainability efforts of 2014.

Science.gov (United States)

2015-08-01

This report presents the 2014 sustainability efforts of the Illinois Department of Transportation (IDOT) in : recycling reclaimed materials in highway construction. This report meets the requirements of Illinois : Public Act 097-0314 by documenting I...

Illinois highway materials sustainability efforts of 2016.

Science.gov (United States)

2017-07-04

This report provides a summary of the sustainability efforts of the Illinois Department of Transportation (IDOT) in recycling : reclaimed materials in highway construction during calendar year 2016. This report meets the requirements of Illinois Publ...

CSIR contribution to the 2010 state of engineering infrastructure in South Africa report card

CSIR Research Space (South Africa)

Wall, K

2010-09-01

Full Text Available In 2006, the South African Institution of Civil Engineering (SAICE), utilising desktop research documentation prepared for this specific purpose by the CSIR, released the first ever “report card” of the state of engineering infrastructure in South...

A perspective of the Malaysian highway energy consumption and future power supply

International Nuclear Information System (INIS)

Saqr, Khalid M.; Musa, Md. Nor

2011-01-01

In this short communication, we discuss the energy consumption trends in the Malaysian road transport sector, with a special emphasis on the energy losses due to vehicle aerodynamic drag on highways. The recent trends of energy consumption in the Malaysian road transport sector are reviewed. It is evidently shown that the aerodynamic losses represented exceed 1.2 MTOE annually since 2002. A novel concept of vertical-axis wind turbine (VAWT) farms for harvesting aerodynamic energy losses on Malaysian highways is preliminarily proposed. The novel concept aims at providing a sustainable and green energy source for the lighting of the highway network in the country.

Flexibility-based damage detection for in-service highway bridge

Science.gov (United States)

Dahal, Sushil; Jang, Shinae; Mensah-Bonsu, Priscilla

2012-04-01

Highway bridges are the backbones of a country's road network infrastructure. In order to efficiently maintain these important structures, structural health monitoring (SHM) can be implemented to impart a more deterministic management procedure. To date, many damage detection strategies have been developed and implemented on lab-scale or simple bridge structures however, damage detection research has rarely been conducted taking full scale in-service structures into account with ambient vibration. Among the different approaches modal flexibility method is one of the sensitive tools for damage detection which has been widely used over the last two decades. This paper presents a damage detection based on the stochastic damage locating vector (SDLV) method for an in-service highway bridge using ambient vibration data from long-term SHM. The target bridge was equipped with a long-term SHM system as a part of a research project of the University of Connecticut. The ambient vibration data during 2001 and 2005 are used to identify the damage on the highway bridge. Finally, the potential damage locations are determined using the SDLV method with the limited number of sensors.

Illinois highway materials sustainability efforts of 2013.

Science.gov (United States)

2014-08-01

This report presents the sustainability efforts of the Illinois Department of Transportation (IDOT) in : recycling and reclaiming materials for use in highway construction. This report meets the requirements of : Illinois Public Act 097-0314 by docum...

Real-time stress monitoring of highway bridges with a secured wireless sensor network.

Science.gov (United States)

2011-12-01

"This collaborative research aims to develop a real-time stress monitoring system for highway bridges with a secured wireless sensor network. The near term goal is to collect wireless sensor data under different traffic patterns from local highway br...

POLLUTION PREVENTION OPPORTUNITY ASSESSMENT UNITED STATES ARMY CORPS OF ENGINEERS PITTSBURGH ENGINEER WAREHOUSE AND REPAIR STATION AND EMSWORTH LOCKS AND DAMS PITTSBURGH, PENNSYLVANIA

Science.gov (United States)

This report summarizes work conducted at the United States Army Corps of Engineers (USACE) Pittsburgh Engineering Warehouse and Repair Station (PEWARS) and Emsworth Locks and Dams in Pittsburgh, Pennsylvania under the U.S. Environmental Protection Agency's (EPA's) Waste Reduction...

Hierarchical analysis of bridge decision makers : the role of new technology adoption in the timber bridge market : special project fiscal year 1992

Science.gov (United States)

1995-08-01

Bridge design engineers and local highway officials make bridge replacement decisions across the : United States. The Analytical Hierarchy Process was used to characterize the bridge material selection : decision of these individuals. State Departmen...

Measurements of air pollution from a Danish highway

Energy Technology Data Exchange (ETDEWEB)

Ellermann, T.; Solvang Jensen, S.; Ketzel, M.; Loefstroem, P. Massling, A.

2009-07-15

This report presents the results from a measurement campaign carried out at the Holbaek Highway during 2008. The objective of the campaign was to determine the emission factors for PM{sub 2.5} and PM{sub 10} due to highway traffic. The campaign included measurements of NO{sub x}, NO, NO{sub 2}, TEOM PM{sub 2.5}, TEOM PM{sub 10}, O{sub 3}, particle size distribution and local meteorology. The emission factors for PM{sub 2.5} and PM{sub 10} were determined to 45 and 155 mg/(vehicle km), respectively. This is comparable to the emission factors previously determined for H. C. Andersens Boulevard in Copenhagen and somewhat higher than found at Jagtvej, Copenhagen. (author)

A brief history of graduate distance education in nuclear engineering at Penn State Univ

International Nuclear Information System (INIS)

Hochreiter, L. E.; Zimmerman, D. L.; Brenizer Jr, J. S.; Stark, M. A.

2006-01-01

The Pennsylvania State University Nuclear Engineering Distance Education Program has a twenty year history of providing graduate level distance education in Nuclear Engineering. The Distance Education Program was initiated as a specific program which was developed for the Westinghouse Energy Systems Divisions in Pittsburgh. In 1983, Carnegie-Mellon University (CMU) decided to terminate its small Nuclear Engineering Program. Up until that time, Westinghouse employees could enroll at CMU for graduate classes in Nuclear Engineering as well as other engineering disciplines and could obtain a masters degree or if desired, could continue for a Ph.D. degree. (authors)

International Conference of Applied Science and Technology for Infrastructure Engineering

Science.gov (United States)

Elvina Santoso, Shelvy; Hardianto, Ekky

2017-11-01

Preface: International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017. The International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017 has been scheduled and successfully taken place at Swiss-Bell Inn Hotel, Surabaya, Indonesia, on August 5th 2017 organized by Department of Civil Infrastructure Engineering, Faculty of Vocation, Institut Teknologi Sepuluh Nopember (ITS). This annual event aims to create synergies between government, private sectors; employers; practitioners; and academics. This conference has different theme each year and “MATERIAL FOR INFRASTUCTURE ENGINEERING” will be taken for this year’s main theme. In addition, we also provide a platform for various other sub-theme topic including but not limited to Geopolymer Concrete and Materials Technology, Structural Dynamics, Engineering, and Sustainability, Seismic Design and Control of Structural Vibrations, Innovative and Green Buildings, Project Management, Transportation and Highway Engineering, Geotechnical Engineering, Water Engineering and Resources Management, Surveying and Geospatial Engineering, Coastal Engineering, Geophysics, Energy, Electronic and Mechatronic, Industrial Process, and Data Mining. List of Organizers, Journal Editors, Steering Committee, International Scientific Committee, Chairman, Keynote Speakers are available in this pdf.

76 FR 45011 - Control of Air Pollution From Aircraft and Aircraft Engines; Proposed Emission Standards and Test...

Science.gov (United States)

2011-07-27

... Paso, TX 223 0.9 1.1 Greater Connecticut, CT 405 0.8 2.4 Houston-Galveston-Brazoria, TX 3,045 1.3 3.4... by many types of pollution sources, such as highway and nonroad motor vehicles and engines, power...

TIGER/Line Shapefile, 2015, Series Information for the Primary and Secondary Roads State-based Shapefile

Data.gov (United States)

US Census Bureau, Department of Commerce — Primary roads are generally divided, limited-access highways within the interstate highway system or under State management, and are distinguished by the presence of...

Efficient quantum state transfer in an engineered chain of quantum bits

Science.gov (United States)

Sandberg, Martin; Knill, Emanuel; Kapit, Eliot; Vissers, Michael R.; Pappas, David P.

2016-03-01

We present a method of performing quantum state transfer in a chain of superconducting quantum bits. Our protocol is based on engineering the energy levels of the qubits in the chain and tuning them all simultaneously with an external flux bias. The system is designed to allow sequential adiabatic state transfers, resulting in on-demand quantum state transfer from one end of the chain to the other. Numerical simulations of the master equation using realistic parameters for capacitive nearest-neighbor coupling, energy relaxation, and dephasing show that fast, high-fidelity state transfer should be feasible using this method.

Proposed methodology for estimating the impact of highway improvements on urban air pollution.

Science.gov (United States)

1971-01-01

The aim of this methodology is to indicate the expected change in ambient air quality in the vicinity of a highway improvement and in the total background level of urban air pollution resulting from the highway improvement. Both the jurisdiction in w...

76 FR 38155 - California State Nonroad Engine Pollution Control Standards; Ocean-Going Vessels At-Berth in...

Science.gov (United States)

2011-06-29

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9426-9] California State Nonroad Engine Pollution Control... toxic control measures for auxiliary diesel engines operated on ocean-going vessels at-berth in... control measures (ATCM) for auxiliary diesel engines operated on ocean-going vessels at-berth in...

Characteristics of the event mean concentration (EMC) from rainfall runoff on an urban highway

International Nuclear Information System (INIS)

Lee, Ju Young; Kim, Hyoungjun; Kim, Youngjin; Han, Moo Young

2011-01-01

The purpose of this study was to investigate the characterization of the event mean concentration (EMC) of runoff during heavy precipitation events on highways. Highway runoff quality data were collected from the 7th highway, in South Korea during 2007-2009. The samples were analyzed for runoff quantity and quality parameters such as COD cr , TSS, TPHs, TKN, NO 3 , TP, PO 4 and six heavy metals, e.g., As, Cu, Cd, Ni, Pb and Zn. Analysis of resulting hydrographs and pollutant graphs indicates that the peak of the pollutant concentrations in runoff occurs 20 min after the first rainfall runoff occurrence. The first flush effect depends on the preceding dry period and the rainfall intensity. The results of this study can be used as a reference for water quality management of urban highways. - Research highlights: → Field test on urban highway were performed to 50 of 100 storm events for 3 years. → The peak pollutant concentrations occurs 20 min after the first runoff. → The first flush effect depends on the preceding dry period and rainfall intensity. → Relationship between runoff and event mean concentration for SS and COD. → A crest of the EMC by 70-80 m 3 /event and decreasing EMC after 70-80 m 3 /event. - This study investigate the characterization of the EMC of runoff during rainfall event on highway.

Fatal accidents in nighttime vs. daytime highway construction work zones.

Science.gov (United States)

Arditi, David; Lee, Dong-Eun; Polat, Gul

2007-01-01

Awareness about worker safety in nighttime construction has been a major concern because it is believed that nighttime construction creates hazardous work conditions. However, only a few studies provide valuable comparative information about accident characteristics of nighttime and daytime highway construction activities. This study investigates fatal accidents that occurred in Illinois highway work zones in the period 1996-2001 in order to determine the safety differences between nighttime and daytime highway construction. The lighting and weather conditions were included into the study as control parameters to see their effects on the frequency of fatal accidents occurring in work zones. According to this study, there is evidence that nighttime construction is more hazardous than daytime construction. The inclusion of a weather parameter into the analysis has limited effect on this finding. The study justifies establishing an efficient work zone accident reporting system and taking all necessary measures to enhance safety in nighttime work zones.

Removal of Heavy Metals and PAH in Highway Detention Ponds

DEFF Research Database (Denmark)

Bentzen, Thomas Ruby; Larsen, Torben; Thorndahl, Søren Liedtke

2005-01-01

, which has been designed according to standard design criteria for several decades. The study will focus on heavy metals (Cd, Cr, Cu, Pb and Zn) and polyaromatic hydrocarbons (PAH). The long-term simulation of input of flow and pollution to the ponds will be a hind cast based on time series of historical......The paper presents some of the first results from a study of the removal of pollutants in highway detention ponds in Denmark. The objective of the study is to set up a procedure for long-term modelling of discharges of pollutants to the environment from the many Danish highway detention ponds...... rainfalls. The modelling will take place in a special version of the MIKE URBAN. The modelling is calibrated and validated on measurements from selected highway catchments. The removal of pollutants in the ponds is studied by local measurements in combination with CFD modelling using the MIKE 21 and MIKE 3...

Modelling Free Flow Speed on Two-Lane Rural Highways in Bosnia and Herzegovina

Directory of Open Access Journals (Sweden)

Ivan Lovrić

2014-04-01

Full Text Available Free flow speed is used as a parameter in transportation planning and capacity analysis models, as well as speed-flow diagrams. Many of these models suggest estimating free flow speed according to measurements from similar highways, which is not a practical method for use in B&H. This paper first discusses problems with using these methodologies in conditions prevailing in B&H and then presents a free flow speed evaluation model developed from a comprehensive field survey conducted on nine homogeneous sections of state and regional roads.

State of Aircraft Turboshaft Engines by Means of Tribotechnical Diagnostic

Science.gov (United States)

Mihalčová, Janka

2018-03-01

The contribution describes concrete example of application of tribotechnical methods for the determination of the bearing wear state in aircraft turboshaft engines. Tribotechnical methods, which will be mentioned, deal with qualitative and quantitative characterization of particles occurred in oil. Here belong method optical emission spectrometry method with rotating disc electrode for determination of chemical elements concentration in oil. Method of optical particles counting for detection of particles distribution according to their scale, determination of their number and ferrographic analysis. Exploitation of these methods make it possible to determine quickly and correctly the friction regime and wearing of friction pair that is washed by oil in observed engines.

77 FR 50502 - California State Nonroad Engine Pollution Control Standards; In-Use Heavy-Duty Vehicles (As...

Science.gov (United States)

2012-08-21

... ENVIRONMENTAL PROTECTION AGENCY [FRL 9716-9] California State Nonroad Engine Pollution Control Standards; In- Use Heavy-Duty Vehicles (As Applicable to Yard Trucks and Two-Engine Sweepers); Opportunity... control of emissions from new nonroad engines which are used in construction equipment or vehicles or used...

75 FR 39820 - Procedures for Abatement of Highway Traffic Noise and Construction Noise

Science.gov (United States)

2010-07-13

...-2008-0114] RIN 2125-AF26 Procedures for Abatement of Highway Traffic Noise and Construction Noise... the Federal regulations on the Procedures for Abatement of Highway Traffic Noise and Construction Noise. The final rule clarifies and adds definitions, the applicability of this regulation, certain...

State of the Air 2015

Science.gov (United States)

... Select Your State Health Risks Ozone Particle Pollution Children’s Health Disparities & Near Highways Protect Yourself Our Fight What We Do Our Story Personal Stories Clean Air Timeline Take Action Press Materials Press Releases Web Banners Social Media What's the State of Your Air ? Home > 2015 > ...

Federal Highway Administration 100-year coating study.

Science.gov (United States)

2012-11-01

The Federal Highway Administration 100-Year Coating Study was initiated in August 2009 to search for durable : coating systems at a reasonable cost. The objective of the study was to identify and evaluate coating materials that can : provide 100 year...

New highway accident location manual for Missouri.

Science.gov (United States)

2013-12-01

The Missouri HAL manual is used to identify, analyze, and correct high crash locations, and has not been updated since : 1999. This new edition brings the manual up to date, while incorporating the methodology of the national Highway Safety : Manual ...

The use of commercial advertising on large scale electronic billboards for highways and their relation to driver safety and driver distraction, literature review.

Science.gov (United States)

2008-07-01

The potential for driver distraction on highways is a major safety concern for state : departments of transportation (DOTs). In the current technological climate, drivers have : the potential to be distracted by cell phones, mp3 players and other med...

Underlying finite state machine for the social engineering attack detection model

CSIR Research Space (South Africa)

Mouton, Francois

2017-08-01

Full Text Available one to have a clearer overview of the mental processing performed within the model. While the current model provides a general procedural template for implementing detection mechanisms for social engineering attacks, the finite state machine provides a...

Longitudinal review of state-level accident statistics for carriers of interstate freight

International Nuclear Information System (INIS)

Saricks, C.; Kvitek, T.

1994-03-01

State-level accident rates by mode of freight transport have been developed and refined for application to the US Department of Energy's (DOE's) environmental mitigation program, which may involve large-quantity shipments of hazardous and mixed wastes from DOE facilities. These rates reflect multi-year data for interstate-registered highway earners, American Association of Railroads member carriers, and coastal and internal waterway barge traffic. Adjustments have been made to account for the share of highway combination-truck traffic actually attributable to interstate-registered carriers and for duplicate or otherwise inaccurate entries in the public-use accident data files used. State-to-state variation in rates is discussed, as is the stability of rates over time. Computed highway rates have been verified with actual carriers of high- and low-level nuclear materials, and the most recent truck accident data have been used, to ensure that the results are of the correct order of magnitude. Study conclusions suggest that DOE use the computed rates for the three modes until (1) improved estimation techniques for highway combination-truck miles by state become available; (2) continued evolution of the railroad industry significantly increases the consolidation of interstate rail traffic onto fewer high-capacity trunk lines; or (3) a large-scale off-site waste shipment campaign is imminent

77 FR 38248 - Passenger Train Emergency Preparedness

Science.gov (United States)

2012-06-27

... State Highway and Transportation Officials (AASHTO); American Chemistry Council; American Petroleum... Engineers and Trainmen (BLET); Brotherhood of Maintenance of Way Employees Division (BMWED); Brotherhood of...

TIGER/Line Shapefile, 2014, Series Information File for the Primary and Secondary Roads State-based Shapefile

Data.gov (United States)

US Census Bureau, Department of Commerce — Primary roads are generally divided, limited-access highways within the interstate highway system or under State management, and are distinguished by the presence of...

Research on Turbofan Engine Model above Idle State Based on NARX Modeling Approach

Science.gov (United States)

Yu, Bing; Shu, Wenjun

2017-03-01

The nonlinear model for turbofan engine above idle state based on NARX is studied. Above all, the data sets for the JT9D engine from existing model are obtained via simulation. Then, a nonlinear modeling scheme based on NARX is proposed and several models with different parameters are built according to the former data sets. Finally, the simulations have been taken to verify the precise and dynamic performance the models, the results show that the NARX model can well reflect the dynamics characteristic of the turbofan engine with high accuracy.

Professional Training in Software Engineering: A Critical Need in the United States

Directory of Open Access Journals (Sweden)

Jennifer Waldrow

2012-06-01

Full Text Available The software is related to almost every aspect of daily life: manufacturing, banking, travel, communications, defense, medicine, research, government, education, entertainment, law ... Is an essential part of military systems and is used in all civilian sectors, including safety and mission critical. Moreover, the complexity of many of these systems has increased exponentially in recent decades and the software has become an essential component for all of them. Unfortunately, the "systems of higher education", in almost all countries have not kept pace with these changes. The current science and engineering programs, both undergraduate and graduate, they need to incorporate more training in Software Engineering. It is especially true in areas such as aerospace engineering, because these systems are highly dependent on computer, information, communications and software. This article presents an analysis of the current situation of the United States in what has to do with software engineering training that receive and require the aerospace engineers.

46 CFR 393.4 - Marine Highway Projects.

Science.gov (United States)

2010-10-01

... transportation system research, data, and analysis used to develop or support the business model. (vii) Proposed... Highway Projects. (9) Utilize current or future Federal funding mechanisms, as appropriate, to support the...) Organization. Provide the organizational structure of the proposed project, including business affiliations...

VEHICLE DRIVING CYCLE OPTIMISATION ON THE HIGHWAY

Directory of Open Access Journals (Sweden)

Zinoviy STOTSKO

2016-06-01

Full Text Available This paper is devoted to the problem of reducing vehicle energy consumption. The authors consider the optimisation of highway driving cycle a way to use the kinetic energy of a car more effectively at various road conditions. The model of a vehicle driving control at the highway which consists of elementary cycles, such as accelerating, free rolling and deceleration under forces of external resistance, was designed. Braking, as an energy dissipation regime, was not included. The influence of the various longitudinal profiles of the road was taken into consideration and included in the model. Ways to use the results of monitoring road and traffic conditions are presented. The method of non-linear programming is used to design the optimal vehicle control function and phase trajectory. The results are presented by improved typical driving cycles that present energy saving as a subject of choice at a specified schedule.

Accumulation of Pollutants in Highway Detention Ponds

DEFF Research Database (Denmark)

Bentzen, Thomas Ruby

single rain event. From the hindcast results it is possible to calculate mean water and pollutant loads. This method is commonly used in urban drainage systems for capacity analysis or for prediction of CSO's. The challenge is to develop a simplified and still accurate description of flow and transport......This PhD study deals with issues related to water and pollutant transport from highway surfaces caused by rain. It is essential in the study to apply methods and models in which improvements in relation to removal of pollutants can be identified and to be able to predict the yearly discharges....... Measurements of water and pollutant transport are carried out in different highway systems. A geometrically well-defined test pond is established, wherein the deposition of particulate matter can be measured. The result from the test pond is transferred to real detention ponds in which the three...

Diesel engines vs. spark ignition gasoline engines -- Which is ``greener``?

Energy Technology Data Exchange (ETDEWEB)

Fairbanks, J.W. [Dept. of Energy, Washington, DC (United States)

1997-12-31

Criteria emissions, i.e., NO{sub x}, PM, CO, CO{sub 2}, and H{sub 2}, from recently manufactured automobiles, compared on the basis of what actually comes out of the engines, the diesel engine is greener than spark ignition gasoline engines and this advantage for the diesel engine increases with time. SI gasoline engines tend to get out of tune more than diesel engines and 3-way catalytic converters and oxygen sensors degrade with use. Highway measurements of NO{sub 2}, H{sub 2}, and CO revealed that for each model year, 10% of the vehicles produce 50% of the emissions and older model years emit more than recent model year vehicles. Since 1974, cars with SI gasoline engines have uncontrolled emission until the 3-way catalytic converter reaches operating temperature, which occurs after roughly 7 miles of driving. Honda reports a system to be introduced in 1998 that will alleviate this cold start problem by storing the emissions then sending them through the catalytic converter after it reaches operating temperature. Acceleration enrichment, wherein considerable excess fuel is introduced to keep temperatures down of SI gasoline engine in-cylinder components and catalytic converters so these parts meet warranty, results in 2,500 times more CO and 40 times more H{sub 2} being emitted. One cannot kill oneself, accidentally or otherwise, with CO from a diesel engine vehicle in a confined space. There are 2,850 deaths per year attributable to CO from SI gasoline engine cars. Diesel fuel has advantages compared with gasoline. Refinery emissions are lower as catalytic cracking isn`t necessary. The low volatility of diesel fuel results in a much lower probability of fires. Emissions could be improved by further reducing sulfur and aromatics and/or fuel additives. Reformulated fuel has become the term covering reducing the fuels contribution to emissions. Further PM reduction should be anticipated with reformulated diesel and gasoline fuels.

29 CFR 1975.5 - States and political subdivisions thereof.

Science.gov (United States)

2010-07-01

... the entity's employees compare to those of the employees of other State and local departments and..., bi-State authorities over bridges, highways, rivers, harbors, etc.; municipal transit entities; and...

Transportation System Vulnerability and Resilience to Extreme Weather Events and Other Natural Hazards : Final Results of Vulnerability Assessment of National Highway System for All KYTC Districts

Science.gov (United States)

2018-05-01

Recent federal legislation and the Federal Highway Administration (FHWA) have directed state transportation agencies to identify potential vulnerabilities associated with extreme weather events and climate change, develop a risk-based asset managemen...

Highway extraction from high resolution aerial photography using a geometric active contour model

Science.gov (United States)

Niu, Xutong

Highway extraction and vehicle detection are two of the most important steps in traffic-flow analysis from multi-frame aerial photographs. The traditional method of deriving traffic flow trajectories relies on manual vehicle counting from a sequence of aerial photographs, which is tedious and time-consuming. This research presents a new framework for semi-automatic highway extraction. The basis of the new framework is an improved geometric active contour (GAC) model. This novel model seeks to minimize an objective function that transforms a problem of propagation of regular curves into an optimization problem. The implementation of curve propagation is based on level set theory. By using an implicit representation of a two-dimensional curve, a level set approach can be used to deal with topological changes naturally, and the output is unaffected by different initial positions of the curve. However, the original GAC model, on which the new model is based, only incorporates boundary information into the curve propagation process. An error-producing phenomenon called leakage is inevitable wherever there is an uncertain weak edge. In this research, region-based information is added as a constraint into the original GAC model, thereby, giving this proposed method the ability of integrating both boundary and region-based information during the curve propagation. Adding the region-based constraint eliminates the leakage problem. This dissertation applies the proposed augmented GAC model to the problem of highway extraction from high-resolution aerial photography. First, an optimized stopping criterion is designed and used in the implementation of the GAC model. It effectively saves processing time and computations. Second, a seed point propagation framework is designed and implemented. This framework incorporates highway extraction, tracking, and linking into one procedure. A seed point is usually placed at an end node of highway segments close to the boundary of the

Final Rule for Nonconformance Penalties for On-Highway Heavy-Duty Diesel Engines

Science.gov (United States)

EPA is taking final action to establish nonconformance penalties (NCPs) for manufacturers of heavy heavy-duty diesel engines (HHDDE) in model years 2012 and later for emissions of oxides of nitrogen (NOX) because we have found the criteria for NCPs.

Improving E-Bike Safety on Urban Highways in China

Directory of Open Access Journals (Sweden)

Linjun Lu

2015-01-01

Full Text Available This paper aims to examine characteristics of e-bike fatal crashes on urban highways in China. Crash data were retrieved from the three-year crash reports (2010–2012 of Taixing City. Descriptive analysis was conducted to examine characteristics of e-bike riders, drivers, and crashes. The important findings include the following: (1 most fatal crashes were related to e-bike riders’ aberrant driving behaviors, including driving in motorized lanes, red-light running, driving against the direction of traffic, inattentive driving, and drunk driving; (2 e-bike riders with lower educational background tended to perform illegal or inattentive driving behaviors in fatal crashes; (3 most drivers were not found to commit any faults and very few drivers were found to commit drunk driving offences; (4 most nighttime fatal crashes were related to absence of street lightings; (5 heavy good vehicles (HGVs and small passenger cars were the two vehicle types that were mostly involved in the e-bike fatal crashes. This study provides useful information that can help traffic engineers better understand e-bike safety in China and develop safety countermeasures.

Learning text representation using recurrent convolutional neural network with highway layers

OpenAIRE

Wen, Ying; Zhang, Weinan; Luo, Rui; Wang, Jun

2016-01-01

Recently, the rapid development of word embedding and neural networks has brought new inspiration to various NLP and IR tasks. In this paper, we describe a staged hybrid model combining Recurrent Convolutional Neural Networks (RCNN) with highway layers. The highway network module is incorporated in the middle takes the output of the bi-directional Recurrent Neural Network (Bi-RNN) module in the first stage and provides the Convolutional Neural Network (CNN) module in the last stage with the i...

Monte Carlo tests of small-world architecture for coarse-grained networks of the United States railroad and highway transportation systems

Science.gov (United States)

Aldrich, Preston R.; El-Zabet, Jermeen; Hassan, Seerat; Briguglio, Joseph; Aliaj, Enela; Radcliffe, Maria; Mirza, Taha; Comar, Timothy; Nadolski, Jeremy; Huebner, Cynthia D.

2015-11-01

Several studies have shown that human transportation networks exhibit small-world structure, meaning they have high local clustering and are easily traversed. However, some have concluded this without statistical evaluations, and others have compared observed structure to globally random rather than planar models. Here, we use Monte Carlo randomizations to test US transportation infrastructure data for small-worldness. Coarse-grained network models were generated from GIS data wherein nodes represent the 3105 contiguous US counties and weighted edges represent the number of highway or railroad links between counties; thus, we focus on linkage topologies and not geodesic distances. We compared railroad and highway transportation networks with a simple planar network based on county edge-sharing, and with networks that were globally randomized and those that were randomized while preserving their planarity. We conclude that terrestrial transportation networks have small-world architecture, as it is classically defined relative to global randomizations. However, this topological structure is sufficiently explained by the planarity of the graphs, and in fact the topological patterns established by the transportation links actually serve to reduce the amount of small-world structure.

Kansas Non-State Road System

Data.gov (United States)

Kansas Data Access and Support Center — This dataset is a single centerline road network representation of 120,000 miles of the Kansas non-state highway system with limited attribution. It includes rural...

Behavioral intentions within off-highway vehicle communities in the northeastern U.S.: an application of the theory of planned behavior

Science.gov (United States)

Peter D' Luhosch; Diane Kuehn; Rudy M. Schuster

2009-01-01

The increasing use of off-highway vehicles (OHV) in the northeastern United States suggests the need for more effective recreation management strategies in public forest areas. This study employed the Theory of Planned Behavior (TPB) (Ajzen 1991) to examine the attitudes and perceptions of OHV operators. Hypotheses were tested regarding differences in attitudes toward...

Life-Cycle Inventory of Manufacturing Prefinished Engineered Wood Flooring in the Eastern United States

Science.gov (United States)

Richard D. Bergman; Scott A. Bowe

2010-01-01

Building products have come under increased scrutiny because of environmental impacts from their manufacturing. However, environmental impacts of manufacturing some wood products—such as prefinished engineered wood flooring—have not been determined. This study examined prefinished engineered wood flooring in the eastern United States following the life-cycle inventory...

77 FR 4736 - Nonconformance Penalties for On-Highway Heavy-Duty Diesel Engines

Science.gov (United States)

2012-01-31

... have evaluated, especially in the context of this third requirement. (1) Competitive Advantage for Non... competitive advantage remains. A manufacturer of a non-complying engine generally gains a competitive... the operator will vary based on several factors. An even harder to quantify competitive advantage is...

Impact of highway construction on land surface energy balance and local climate derived from LANDSAT satellite data.

Science.gov (United States)

Nedbal, Václav; Brom, Jakub

2018-08-15

Extensive construction of highways has a major impact on the landscape and its structure. They can also influence local climate and heat fluxes in the surrounding area. After the removal of vegetation due to highway construction, the amount of solar radiation energy used for plant evapotranspiration (latent heat flux) decreases, bringing about an increase in landscape surface temperature, changing the local climate and increasing surface run-off. In this study, we evaluated the impact of the D8 highway construction (Central Bohemia, Czech Republic) on the distribution of solar radiation energy into the various heat fluxes (latent, sensible and ground heat flux) and related surface functional parameters (surface temperature and surface wetness). The aim was to describe the severity of the impact and the distance from the actual highway in which it can be observed. LANDSAT multispectral satellite images and field meteorological measurements were used to calculate surface functional parameters and heat balance before and during the highway construction. Construction of a four-lane highway can influence the heat balance of the landscape surface as far as 90m in the perpendicular direction from the highway axis, i.e. up to 75m perpendicular from its edge. During a summer day, the decrease in evapotranspired water can reach up to 43.7m 3 per highway kilometre. This means a reduced cooling effect, expressed as the decrease in latent heat flux, by an average of 29.7MWh per day per highway kilometre and its surroundings. The loss of the cooling ability of the land surface by evaporation can lead to a rise in surface temperature by as much as 7°C. Thus, the results indicate the impact of extensive line constructions on the local climate. Copyright © 2018 Elsevier B.V. All rights reserved.

Numerical Modelling of Suspended Transport and Deposition of Highway Deposited Sediments

DEFF Research Database (Denmark)

Bentzen, Thomas Ruby; Larsen, Torben; Bach, Christine

Good data for calibration and validation of numerical models are of high importance. In the natural environment data can be hard to archive and the stochastic nature have governing influence on the data archived. Hence for modelling of suspended transport and deposition of particles, originating ...... from the highway surfaces, in highway detention ponds, four experiments are carried out. To simplify the complexity of a real pond and for easy control and measurement the sediment transports where carried out in two rectangular channels....

Nuclear engineering education in the United States: The first 50 years

International Nuclear Information System (INIS)

Brown, G.

2004-01-01

Full text: This paper will discuss recent trends in the nuclear engineering education infrastructure in the United States. In the last several years political, economic and technical issues have been addressed and nuclear technology appears poised to resume growing again. It is in this new environment that there has been a confluence of industry, government and academic interests to see that nuclear engineering education retains its vitality and ability to provide technological leadership and a well-educated workforce. In order to understand the current situation it is important to give a brief historical perspective covering the six decades since the inception of 'Atoms for Peace' in 1953. The passage of the Atomic Energy Act of 1954 established the Atomic Energy Commission and the declassification of much nuclear technology and scientific material. There was an understandable optimistic outlook as to the potential for nuclear technology in the areas of power, medicine and other industrial and scientific applications. There were commercial concepts for using nuclear energy to power ships, planes, rockets, and cars. But the must successful application, by far was in the area of electric power production. In only a few years demonstration nuclear power plants were built and the infamous quote - 'two cheap to meter' was reported. In the following decade much progress was made and commercial plant orders increased substantially in number and in size. There were going to light water reactors, gas cooled reactors, liquid metal fast reactors, reprocessing, waste buried in salt mines. There was going to be 'a 1000 reactors in the year 2000'. This was the picture in the United States in the 50's and 60's. And it was in this environment that nuclear engineering education was birthed and grew. The first nuclear engineering academic programs and university research reactors were established in the 1950's at such places as North Carolina State, MIT, Penn State and others

Determining the Toll and Capacity of a Highway to Be Constructed in Parallel with Subway

Directory of Open Access Journals (Sweden)

Wen-Xiang Wu

2014-01-01

Full Text Available This paper considers the problem of toll and capacity choice of a new highway with a bottleneck added onto an existing transit network under four ownership/tolling regimes: public fine toll, public flat toll, private fine toll, and private flat toll. Whenever fine toll and flat toll are imposed, in a competitive highway/transit network with constant returns to scale in road construction, an optimally designed and priced privately owned highway would produce positive net benefit justly equal to the total markup with respect to all autocommuters, whereas an optimally designed and priced publicly owned highway would lead to a deficit; that is, the toll revenues are insufficient to cover its all costs. The economic conditions to invest a new road are investigated under different ownership/tolling regimes.

Revenue Risk Modelling and Assessment on BOT Highway Project

Science.gov (United States)

Novianti, T.; Setyawan, H. Y.

2018-01-01

The infrastructure project which is considered as a public-private partnership approach under BOT (Build-Operate-Transfer) arrangement, such as a highway, is risky. Therefore, assessment on risk factors is essential as the project have a concession period and is influenced by macroeconomic factors and consensus period. In this study, pre-construction risks of a highway were examined by using a Delphi method to create a space for offline expert discussions; a fault tree analysis to map intuition of experts and to create a model from the underlying risk events; a fuzzy logic to interpret the linguistic data of risk models. The loss of revenue for risk tariff, traffic volume, force majeure, and income were then measured. The results showed that the loss of revenue caused by the risk tariff was 10.5% of the normal total revenue. The loss of revenue caused by the risk of traffic volume was 21.0% of total revenue. The loss of revenue caused by the force majeure was 12.2% of the normal income. The loss of income caused by the non-revenue events was 6.9% of the normal revenue. It was also found that the volume of traffic was the major risk of a highway project because it related to customer preferences.

The Status of Technology and Engineering Education in the United States: A Fourth Report of the Findings from the States (2011-12)

Science.gov (United States)

Moye, Johnny J.; Dugger, William E., Jr.; Starkweather, Kendall N.

2012-01-01

Technology and engineering education continues to evolve as it becomes more apparent that students need this information to become more successful in college and careers. The International Technology and Engineering Educators Association (ITEEA ) has tracked the status of technology education in the United States in three separate studies over the…

Design procedure for pollutant loadings and impacts for highway stormwater runoff (Macintosh version) (for microcomputers). Software

International Nuclear Information System (INIS)

1990-01-01

The interactive computer program was developed to make a user friendly procedure for the personal computer for calculations and guidance to make estimations of pollutant loadings and impacts from highway stormwater runoff which are presented in the Publication FHWA-RD-88-006, Pollutant Loadings and Impacts from Highway Stormwater Runoff, Volume I: Design Procedure. The computer program is for the evaluation of the water quality impact from highway stormwater runoff to a lake or a stream from a specific highway site considering the necessary rainfall data and geographic site situation. The evaluation considers whether or not the resulting water quality conditions can cause a problem as indicated by the violations of water quality criteria or objectives

Design procedure for pollutant loadings and impacts for highway stormwater runoff (IBM version) (for microcomputers). Software

International Nuclear Information System (INIS)

1990-01-01

The interactive computer program was developed to make a user friendly procedure for the personal computer for calculations and guidance to make estimations of pollutant loadings and impacts from highway stormwater runoff which are presented in the Publication FHWA-RD-88-006, Pollutant Loadings and Impacts from Highway Stormwater Runoff, Volume I: Design Procedure. The computer program is for the evaluation of the water quality impact from highway stormwater runoff to a lake or a stream from a specific highway site considering the necessary rainfall data and geographic site situation. The evaluation considers whether or not the resulting water quality conditions can cause a problem as indicated by the violations of water quality criteria or objectives

40 CFR Appendix A to Subpart A of... - State Regulation of Nonroad Internal Combustion Engines

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false State Regulation of Nonroad Internal Combustion Engines A Appendix A to Subpart A of Part 89 Protection of Environment ENVIRONMENTAL PROTECTION... Nonroad Internal Combustion Engines This appendix sets forth the Environmental Protection Agency's (EPA's...

Solar Lighting Technologies for Highway Green Rest Areas in China: Energy Saving Economic and Environmental Evaluation

Directory of Open Access Journals (Sweden)

Xiaochun Qin

2015-01-01

Full Text Available In this paper, taking Lushan West Sea highway green rest area in Jiangxi Province of China as the case study, the suitable types, applicability, advantages, and effective methods of solar lighting technologies for highway rest area were determined based on the analysis of characteristics of highway green rest area. It was proved that solar lighting technologies including the natural light guidance system, solar LED lighting, and maximizing natural light penetration were quite suitable for highway rest area in terms of lighting effects and energy and economic efficiency. The illuminance comparison of light guidance system with electrical lighting was made based on the on-site experiment. Also, the feasibility of natural light guidance system was well verified in terms of the lighting demand of the visitor centre in the rest area by the illuminance simulation analysis. The evaluation of the energy saving, economic benefits, and environmental effects of solar lighting technologies for highway rest area was, respectively, made in detail. It was proved that the application of solar technology for green lighting of highway rest facilities not only could have considerable energy saving capacity and achieve high economic benefits, but also make great contributions to the reduction of environment pollution.

Environmental suitability of recycled concrete aggregate in highways.

Science.gov (United States)

2015-01-01

The use of recycled concrete aggregate materials in highway constructions as compared to the use of virgin : materials reduces virgin natural resource demands on the environment. In order to evaluate their potential use of : recycle materials in high...

Impact Factors and Risk Analysis of Tropical Cyclones on a Highway Network.

Science.gov (United States)

Yang, Saini; Hu, Fuyu; Jaeger, Carlo

2016-02-01

Coastal areas typically have high social and economic development and are likely to suffer huge losses due to tropical cyclones. These cyclones have a great impact on the transportation network, but there have been a limited number of studies about tropical-cyclone-induced transportation network functional damages, especially in Asia. This study develops an innovative measurement and analytical tool for highway network functional damage and risk in the context of a tropical cyclone, with which we explored the critical spatial characteristics of tropical cyclones with regard to functional damage to a highway network by developing linear regression models to quantify their relationship. Furthermore, we assessed the network's functional risk and calculated the return periods under different damage levels. In our analyses, we consider the real-world highway network of Hainan province, China. Our results illustrate that the most important spatial characteristics were location (in particular, the midlands), travel distance, landfalling status, and origin coordinates. However, the trajectory direction did not obviously affect the results. Our analyses indicate that the highway network of Hainan province may suffer from a 90% functional damage scenario every 4.28 years. These results have critical policy implications for the transport sector in reference to emergency planning and disaster reduction. © 2015 Society for Risk Analysis.

Second-best Road Pricing through Highway Franchising

NARCIS (Netherlands)

Verhoef, E.T.

2007-01-01

This paper considers the welfare impacts of a range of franchising regimes for congestible highways. For a single road in isolation, it is shown that a competitive auction with the level of road use as the decision criterion produces the socially optimal road (in terms of capacity and toll level),

Engineering opportunities in nuclear engineering

International Nuclear Information System (INIS)

Walton, D.G.

1980-01-01

The pattern of education and training of Nuclear Engineers in the UK is outlined under the headings; degree courses for professional engineers, postgraduate courses, education of technician engineers. Universities which offer specific courses are stated and useful addresses listed. (UK)

The impact of Arizona Highways Magazine's facebook page.

Science.gov (United States)

2014-02-01

This project examined the relationship between use of the Arizona Highways magazine (AHM) Facebook Page and the decision to : travel to or within Arizona. Key purposes were to: (1) provide a thorough understanding of AHM Facebook Page users, includin...

Highway Travel Time Prediction Using Sparse Tensor Completion Tactics and K-Nearest Neighbor Pattern Matching Method

Directory of Open Access Journals (Sweden)

Jiandong Zhao

2018-01-01

Full Text Available Remote transportation microwave sensor (RTMS technology is being promoted for China’s highways. The distance is about 2 to 5 km between RTMSs, which leads to missing data and data sparseness problems. These two problems seriously restrict the accuracy of travel time prediction. Aiming at the data-missing problem, based on traffic multimode characteristics, a tensor completion method is proposed to recover the lost RTMS speed and volume data. Aiming at the data sparseness problem, virtual sensor nodes are set up between real RTMS nodes, and the two-dimensional linear interpolation and piecewise method are applied to estimate the average travel time between two nodes. Next, compared with the traditional K-nearest neighbor method, an optimal KNN method is proposed for travel time prediction. optimization is made in three aspects. Firstly, the three original state vectors, that is, speed, volume, and time of the day, are subdivided into seven periods. Secondly, the traffic congestion level is added as a new state vector. Thirdly, the cross-validation method is used to calibrate the K value to improve the adaptability of the KNN algorithm. Based on the data collected from Jinggangao highway, all the algorithms are validated. The results show that the proposed method can improve data quality and prediction precision of travel time.

Reducing greenhouse gas emissions through strategic management of highway pavement roughness

International Nuclear Information System (INIS)

Wang, Ting; Harvey, John; Kendall, Alissa

2014-01-01

On-road vehicle use is responsible for about a quarter of US annual greenhouse gas (GHG) emissions. Changes in vehicles, travel behavior and fuel are likely required to meet long-term climate change mitigation goals, but may require a long time horizon to deploy. This research examines a near-term opportunity: management of pavement network roughness. Maintenance and rehabilitation treatments can make pavements smoother and reduce vehicle rolling resistance. However, these treatments require material production and equipment operation, thus requiring a life cycle perspective for benefits analysis. They must also be considered in terms of their cost-effectiveness in comparison with other alternatives for affecting climate change. This letter describes a life cycle approach to assess changes in total GHG (measured in CO 2 -e) emissions from strategic management of highway pavement roughness. Roughness values for triggering treatments are developed to minimize GHG considering both treatment and use phase vehicle emission. With optimal triggering for GHG minimization, annualized reductions on the California state highway network over a 10-year analysis period are calculated to be 0.82, 0.57 and 1.38 million metric tons compared with historical trigger values, recently implemented values and no strategic intervention (reactive maintenance), respectively. Abatement costs calculated using $/metric-ton CO 2 -e are higher than those reported for other transportation sector abatement measures, however, without considering all benefits associated with pavement smoothness, such as vehicle life and maintenance, or the time needed for deployment. (paper)

West Virginia Peer Exchange : Streamlining Highway Safety Improvement Program Project Delivery - An RSPCB Peer Exchange

Science.gov (United States)

2014-09-01

The West Virginia Division of Highways (WV DOH) hosted a Peer Exchange to share information and experiences for streamlining Highway Safety Improvement Program (HSIP) project delivery. The event was held September 23 to 24, 2014 in Charleston, West V...

The impact of Arizona Highways Magazine on tourism.

Science.gov (United States)

2012-03-01

The purpose of this study was to: 1) examine the effect of Arizona Highways Magazine (AHM) on tourism, 2) determine trip : characteristics of AHM subscribers traveling in Arizona, and 3) calculate a benefit/cost ratio for AHM based on the : magazine...

Childhood cancer and residential exposure to highways: a nationwide cohort study

International Nuclear Information System (INIS)

Spycher, Ben D.; Feller, Martin; Röösli, Martin; Ammann, Roland A.; Diezi, Manuel; Egger, Matthias; Kuehni, Claudia E.

2015-01-01

Children living near highways are exposed to higher concentrations of traffic-related carcinogenic pollutants. Several studies reported an increased risk of childhood cancer associated with traffic exposure, but the published evidence is inconclusive. We investigated whether cancer risk is associated with proximity of residence to highways in a nation-wide cohort study including all children aged <16 years from Swiss national censuses in 1990 and 2000. Cancer incidence was investigated in time to event analyses (1990–2008) using Cox proportional hazards models and incidence density analyses (1985–2008) using Poisson regression. Adjustments were made for socio-economic factors, ionising background radiation and electromagnetic fields. In time to event analysis based on 532 cases the adjusted hazard ratio for leukaemia comparing children living <100 m from a highway with unexposed children (≥500 m) was 1.43 (95 % CI 0.79, 2.61). Results were similar in incidence density analysis including 1367 leukaemia cases (incidence rate ratio (IRR) 1.57; 95 % CI 1.09, 2.25). Associations were similar for acute lymphoblastic leukaemia (IRR 1.64; 95 % CI 1.10, 2.43) and stronger for leukaemia in children aged <5 years (IRR 1.92; 95 % CI 1.22, 3.04). Little evidence of association was found for other tumours. Our study suggests that young children living close to highways are at increased risk of developing leukaemia

Maintenance of signs and sign supports : a guide for local highway and street maintenance personnel.

Science.gov (United States)

2010-01-01

Highway signs are the means by which the road agency communicates the rules, warnings, guidance and other highway information that drivers need to navigate their roads and streets. This guide, which is an update to the same titled guide published in ...

Level II scour analysis for Bridge 37 (TOWNTH00290037) on Town Highway 29, crossing Mill Brook, Townshend, Vermont

Science.gov (United States)

Burns, R.L.; Medalie, Laura

1998-01-01

This report provides the results of a detailed Level II analysis of scour potential at structure TOWNTH00290037 on Town Highway 29 crossing Mill Brook, Townshend, Vermont (figures 1–8). A Level II study is a basic engineering analysis of the site, including a quantitative analysis of stream stability and scour (FHWA, 1993). Results of a Level I scour investigation also are included in Appendix E of this report. A Level I investigation provides a qualitative geomorphic characterization of the study site. Information on the bridge, gleaned from Vermont Agency of Transportation (VTAOT) files, was compiled prior to conducting Level I and Level II analyses and is found in appendix D.

Level II scour analysis for Bridge 8, (MANCTH00060008) on Town Highway 6, crossing Bourn Brook, Manchester, Vermont

Science.gov (United States)

Burns, Ronda L.; Hammond, Robert E.

1997-01-01

This report provides the results of a detailed Level II analysis of scour potential at structure MANCTH00060008 on Town Highway 6 crossing Bourn Brook, Manchester, Vermont (figures 1–8). A Level II study is a basic engineering analysis of the site, including a quantitative analysis of stream stability and scour (U.S. Department of Transportation, 1993). Results of a Level I scour investigation also are included in Appendix E of this report. A Level I investigation provides a qualitative geomorphic characterization of the study site. Information on the bridge, gleaned from Vermont Agency of Transportation (VTAOT) files, was compiled prior to conducting Level I and Level II analyses and is found in Appendix D.

Level II scour analysis for Bridge 30, (HUNTTH00220030), on Town Highway 22, crossing Brush Brook, Huntington, Vermont

Science.gov (United States)

Burns, Ronda L.

1997-01-01

This report provides the results of a detailed Level II analysis of scour potential at structure HUNTTH00220030 on Town Highway 22 crossing Brush Brook, Huntington, Vermont (figures 1–8). A Level II study is a basic engineering analysis of the site, including a quantitative analysis of stream stability and scour (U.S. Department of Transportation, 1993). Results of a Level I scour investigation also are included in Appendix E of this report. A Level I investigation provides a qualitative geomorphic characterization of the study site. Information on the bridge, gleaned from Vermont Agency of Transportation (VTAOT) files, was compiled prior to conducting Level I and Level II analyses and is found in Appendix D.

Level II scour analysis for brigde 5 (STOCTH00360005) on Town Highway 36, crossing Stony Brook, Stockridge, Vermont

Science.gov (United States)

Striker, Lora K.; Weber, Matthew A.

1998-01-01

This report provides the results of a detailed Level II analysis of scour potential at structure STOCTH00360005 on Town Highway 36 crossing Stony Brook, Stockbridge, Vermont (figures 1–8). A Level II study is a basic engineering analysis of the site, including a quantitative analysis of stream stability and scour (U.S. Department of Transportation, 1993). Results of a Level I scour investigation also are included in appendix E of this report. A Level I investigation provides a qualitative geomorphic characterization of the study site. Information on the bridge, gleaned from Vermont Agency of Transportation (VTAOT) files, was compiled prior to conducting Level I and Level II analyses and is found in appendix D.

Level II scour analysis for Bridge 8 (ATHETH00090008) on Town Highway 9, crossing Bull Creek, Athens, Vermont

Science.gov (United States)

Boehmler, Erick M.; Burns, Ronda L.

1997-01-01

This report provides the results of a detailed Level II analysis of scour potential at structure ATHETH00090008 on Town Highway 9 crossing Bull Creek in Athens, Vermont (figures 1–8). A Level II study is a basic engineering analysis of the site, including a quantitative analysis of stream stability and scour (U.S. Department of Transportation, 1993). Results of a Level I scour investigation also are included in Appendix E of this report. A Level I investigation provides a qualitative geomorphic characterization of the study site. Information on the bridge, gleaned from Vermont Agency of Transportation (VTAOT) files, was compiled prior to conducting Level I and Level II analyses and is found in Appendix D.

Level II scour analysis for Bridge 16, (NEWBTH00500016) on Town Highway 50, crossing Halls Brook, Newbury, Vermont

Science.gov (United States)

Burns, Ronda L.; Degnan, James R.

1997-01-01

This report provides the results of a detailed Level II analysis of scour potential at structure NEWBTH00500016 on Town Highway 50 crossing Halls Brook, Newbury, Vermont (figures 1–8). A Level II study is a basic engineering analysis of the site, including a quantitative analysis of stream stability and scour (U.S. Department of Transportation, 1993). Results of a Level I scour investigation also are included in Appendix E of this report. A Level I investigation provides a qualitative geomorphic characterization of the study site. Information on the bridge, gleaned from Vermont Agency of Transportation (VTAOT) files, was compiled prior to conducting Level I and Level II analyses and is found in Appendix D.

Spent fuel transportation on highways: the radioactive dose to the traffic

International Nuclear Information System (INIS)

Yadigaroglu, G.

1975-01-01

The radioactive exposure of the traffic moving on the same highway as spent fuel shipments has been neglected in the past. Methods developed for calculating peak exposures, the number of individuals receiving a dose in excess of a certain limiting value, and the cumulative population doses for the occupants of the vehicles under a variety of highway and accident conditions allow comparisons to the corresponding stationary-population doses. Consideration of both routine direct-radiation exposures and accidental releases indicates that the traffic doses can be of equal or greater importance than the stationary-population doses

Bioindication of the heavy metals environmental pollution (on the example of highway «Kyiv-Warsaw»

Directory of Open Access Journals (Sweden)

S. S. Voloschynska

2008-04-01

Full Text Available The state of pollution of natural environment along the highway «Kyiv – Warsaw» is analysed. It is indicated on the variety of plants’ species and on the basic pollutant of the environment. The peculiarities of Pb distribution in the soil and Pb concentration in the vegetative organs of predominant vegetation are lighted up. Dynamics of the toxicant distribution in crops is presented. The comparative analysis of pigments’ contents in the plants’ laminas was carried out.

40 CFR 1033.515 - Discrete-mode steady-state emission tests of locomotives and locomotive engines.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Discrete-mode steady-state emission... Procedures § 1033.515 Discrete-mode steady-state emission tests of locomotives and locomotive engines. This... a warm-up followed by a sequence of nominally steady-state discrete test modes, as described in...

Parallel shooting methods for finding steady state solutions to engine simulation models

DEFF Research Database (Denmark)

Andersen, Stig Kildegård; Thomsen, Per Grove; Carlsen, Henrik

2007-01-01

Parallel single- and multiple shooting methods were tested for finding periodic steady state solutions to a Stirling engine model. The model was used to illustrate features of the methods and possibilities for optimisations. Performance was measured using simulation of an experimental data set...

The Supply and Demand of Technology and Engineering Teachers in the United States: Who Knows?

Science.gov (United States)

Moye, Johnny J.

2017-01-01

The purpose of this study was to determine the supply and demand of technology and engineering teachers in the United States. Once gathered, the resulting data (that was available) was compared to previous studies to determine trends. The researcher reviewed the 2010-11 through 2015-16 Technology & Engineering Teacher Education Directories. To…

Development of a special topics course on civil engineering project finance for the Zachry Department of Civil Engineering of Texas A&M University.

Science.gov (United States)

2011-05-01

Experts predict that the highway trust fund will deteriorate rapidly over the course of the next several : years. This situation has led many state agencies to seek alternative financing methods that can meet both : social and economic needs. One pos...

Effects of highway-deicer application on ground-water quality in a part of the Calumet Aquifer, northwestern Indiana

Science.gov (United States)

Watson, Lee R.; Bayless, E. Randall; Buszka, Paul M.; Wilson, John T.

2002-01-01

in ground water were determined in samples collected during the spring and summer from wells open to the water table within about 9 feet of the highway. Chloride concentrations in ground water that were attributable to highway deicers also were found in tested wells about 400 feet downgradient from US?12 during the fall and winter and at greater depths than in wells closer to US?12. Chloride concentrations exceeded the U.S. Environmental Protection Agency?s (USEPA) secondary maximum contaminant level of 250 milligrams per liter for drinking water at seven wells downgradient from the highway during late winter, spring, and summer samplings. The chloride standard was exceeded only in water from wells with total depths that are less than about 10 feet below land surface. Sodium concentrations in water periodically exceeded the USEPA drinking-water equivalency level of 20 milligrams per liter in both the uppermost (deicer affected) and lower one-thirds of the aquifer. Sodium concentrations in ground water downgradient from US?12 and in the upper 5 feet of the aquifer also occasionally exceeded drinking-water standards for sodium (160 milligrams per liter) as set by the State of Florida and a standard for taste (200 milligrams per liter) as set by the World Health Organization. Dispersion was identified by analysis of aquifer-test data, isotopic dating of ground water, and water-quality data to be the process most responsible for reducing concentrations of highway deicers in the aquifer. Chemical analyses of the sand composing the aquifer indicated that cation exchange decreased the mass of deicer-related sodium in ground water, although the sand has a limited capacity to sustain the process. Automated daily measurements of specific conductance, correlated to chloride concentrations, indicated that some deicer is retained in the aquifer near the highway throughout the entire year and acts as a continuous chloride source for ground water. Peak concentrations of

National Highway Traffic Safety Administration 1995 customer satisfaction survey

Science.gov (United States)

1996-05-01

The National Highway Traffic Safety Administration (NHTSA) conducted a national Customer Satisfaction Survey in response to the requirements of the National Performance Review and Executive Order 12862. An independent research organization, Schulman,...

Highway vehicle systems contractors coordination meeting. Seventeenth summary report

Energy Technology Data Exchange (ETDEWEB)

None

1979-01-01

Separate abstracts was prepared for each of the 62 papers presented at the Contractors' Coordination meeting on highway vehicle systems. One paper had previously appeared in DOE's data base.

Technical Support Document: 50% Energy Savings Design Technology Packages for Highway Lodging Buildings

Energy Technology Data Exchange (ETDEWEB)

Jiang, Wei; Gowri, Krishnan; Lane, Michael D.; Thornton, Brian A.; Rosenberg, Michael I.; Liu, Bing

2009-09-28

This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

Developing a highway emergency response plan for incidents involving hazardous materials, second edition, March 1992

International Nuclear Information System (INIS)

Anon.

1992-01-01

This provides minimum guidelines for developing an emergency response plan for incidents involving hazardous liquid hydrocarbons, such as gasoline and crude oil, transported in MC 306/DOT 406 and MC 307/DOT 407 aluminum cargo tanks and for coordinating and cooperating with local, state, and federal officials. This publication covers response plan priorities, personnel training, special equipment, media relations, environmental relations, and post-response activities. The apprendixes to this recommended practice outline a highway emergency response plan and suggest a procedure for removing liquid hydrocarbons from overturned cargo tanks and righting the tank vehicles

Alkali-aggregate reactivity (AAR) workshops for engineers and practitioners reference manual.

Science.gov (United States)

2013-01-01

Funding for the Federal Highway Administration (FHWA) Alkali-Silica Reactivity (ASR) Development and Deployment Program was provided under SAFETEA-LU. A related Conference Report provides additional guidance stating that project and programs related ...

Apparatus for obtaining electric energy in speed highways

International Nuclear Information System (INIS)

Khalatyan, P.R.; Khalatyan, R.P.; Khalatyan, E.P.

2012-01-01

The problems of obtaining electricity by means of moving motor-transport are examined. An apparatus installed in the distributive zone of intensive traffic speed highways is proposed. Part of air mass movement of kinetic energy is transformed from the movement of automobiles into electricity

Variability of Travel Times on New Jersey Highways

Science.gov (United States)

2011-06-01

This report presents the results of a link and path travel time study conducted on selected New Jersey (NJ) highways to produce estimates of the corresponding variability of travel time (VTT) by departure time of the day and days of the week. The tra...

National Highway Traffic Safety Administration : 1997 customer satisfaction survey

Science.gov (United States)

1998-03-13

In 1995, the National Highway Traffic Safety Administration (NHTSA) conducted its first Customer Satisfaction Survey in response to the requirements of the National Performance Review and Executive Order 12862. An independent research organization, S...

Drug research methodology. Volume 1, The alcohol-highway safety experience and its applicability to other drugs

Science.gov (United States)

1980-03-01

This report presents the findings of a workshop concerning the alcohol and highway safety experience, which includes research efforts to define the drinking-driving problem and societal responses to reduce the increased highway safety risk attributab...

Risk assessment of wind turbines sited close to highways; Risikovurdering i forbindelse med vindmoeller og motorveje

Energy Technology Data Exchange (ETDEWEB)

Dalsgaard Soerensen, J.; Lemming, J. (Risoe DTU, Roskilde (Denmark)); Noerkaer Soerensen, J. (Danmarks Tekniske Univ., DTU Mekanik, Kgs. Lyngby (Denmark))

2011-06-15

This report treats risk assessment of siting wind turbines close to highways in Denmark. The assessment only deals with the risk of total or partly failure of the turbines and the risk of ice throw from the blades. The report describes the fundamental methods, risk assessments as well as the assumptions and limitations the results are based on. The results is based on an example with a number of turbines sited alone the highway and presented as the risk per driven km on the highway. (Author)

Secondary materials: Engineering properties, environmental consequences, and social and economic impacts. Final report

Energy Technology Data Exchange (ETDEWEB)

Breslin, V.; Reaven, S.; Schwartz, M.; Swanson, L.; Zweig, M.; Bortman, M.; Schubel, J.

1993-08-01

This report investigates two secondary materials, plastic lumber made from mixed plastic waste, and cement blocks and structures made with incinerator ash. Engineering properties, environmental impacts, and energy costs and savings of these secondary materials are compared to standard lumber products and cement blocks. Market capacity and social acceptance of plastic lumber and stabilized ash products are analyzed. These secondary materials apparently have potential markets; however, their economic value is primarily that they will not take up landfill space. For plastic lumber and stabilized incinerator ash products, marine and highway construction seem ideal public works applications. Incinerator ash may be suitable to use in seawalls, jetties, fishing reefs, highway barriers, and roadbed applications. Docks, piers, highway sound barriers, parking stops, and park furniture may all be made from plastic lumber. To encourage public acceptance and improve the market potential of secondary materials, these activities could be beneficial: industry should emphasize developing useful, long-lived products; industry and governments should create product performance criteria; government should provide rigorous testing and demonstration programs; and government and industry should cooperate to improve public outreach and educational programs.

Testimony on the Status of the Highway Trust Fund

OpenAIRE

Kim P. Cawley

2013-01-01

The current trajectory of the Highway Trust Fund is unsustainable. Starting in fiscal year 2015, the trust fund will have insufficient resources to meet all of its obligations—CBO projects—resulting in steadily accumulating shortfalls.

Evolution of new reflective materials for overhead highway signage

Science.gov (United States)

2008-07-01

Unlighted highway signs using newly developed retroreflective materials were installed along the Gowanus Expressway. Photometric measurements of the signs were used to assess the visibility of the signs using the relative visual performance model. Th...

Contractors perspective for critical factors of cost overrun in highway projects of Sindh, Pakistan

Science.gov (United States)

Sohu, Samiullah; Abdullah, Abd Halid; Nagapan, Sasitharan; Fattah, Abdul; Ullah, Kaleem; Kumar, Kanesh

2017-10-01

Construction industry of Pakistan is creating a number of opportunities in employment as well as plays a role model for economy development of the country. This construction industry has a serious issue of cost overrun in all construction projects especially in construction of highway projects. Cost overrun is a serious and critical issue in construction of highway projects which gives negative impact to construction practitioners because it is not only cross the approved budget but also approved time of the project. The main objective of this study is to find out critical factors causing cost overrun in highway projects of Sindh according to contractors' perspectives. Deep literature review was carried out and a total of 64 factors of cost overrun were identified. To achieve the objective, a questionnaire was designed and distributed among 16 selected respondents who have more than 20 years of experience in construction of highway projects. The results from analysis found that most critical factors of cost overrun in the order of importance include financial and cash flow difficulties faced by contractor, frequent changes in design, changes in price of materials, poor planning by client, change in scope of project, change in specification of materials and delay in taking decisions. This study will assist contractors to narrow down some of the critical factors that would lead to cost overrun, and therefore be prepared with the ways to mitigate these problems in construction of highway projects of Sindh province.

Highways, Alleys and By-lanes

DEFF Research Database (Denmark)

Hellström, Christina; Hellström, Tomas

2002-01-01

The present paper introduces a view of how ideas develop in organizations that goes beyond the traditional focus on either individual or structural conditions for creativity and innovation. An interview study was conducted with key actors in a large Swedish telecom company. A model...... was then constructed where idea development is viewed as a process of combining and integrating various informal, yet powerful qualities of the organization. The paper argues that successful idea development depends on the capacity of actors and ideas to move on ‘organizational highways, alleys and by–lanes’. A number...

The Damage Effects in Steel Bridges under Highway Random Loading

DEFF Research Database (Denmark)

Agerskov, Henning; Nielsen, Jette Andkjær

1996-01-01

In the present investigation, fatigue damage accumulation in steel bridges under highway random loading is studied. In the experimental part of the investigation, fatigue test series on welded plate test specimens have been carried through. The fatigue tests have been carried out using load histo...... indicate that the linear fatigue damage accumulation formula, which is normally used in the design against fatigue in steel bridges, may give results, which are unconservative.......In the present investigation, fatigue damage accumulation in steel bridges under highway random loading is studied. In the experimental part of the investigation, fatigue test series on welded plate test specimens have been carried through. The fatigue tests have been carried out using load...

Pedestrian safety engineering and intelligent transportation system-based countermeasures program for reduced pedestrian fatalities, injuries, conflicts and other surrogate measures : Miami-Dade site.

Science.gov (United States)

2008-08-25

This report presents the methods and key findings from the Miami-Dade comprehensive pedestrian safety planning and engineering project. It is one of three such projects in the nation funded by the Federal Highway Administration (FHWA) to evaluate: In...

Civil engineering challenge with nuclear waste

International Nuclear Information System (INIS)

Day, D.

1985-01-01

The civil engineer can help to solve the problems in disposing of nuclear waste in a deep geologic formation. The site for a nuclear waste repository must be carefully selected so that the geology provides the natural barrier between the waste and the accessible environment specified by the NRC and the EPA. This engineer is familiar with the needed structure and conditions of the host and surrounding rocks, and also the hydraulic mechanisms for limiting the migration of water in the rocks. To dispose of the nuclear waste underground requires stable and long-lasting shafts and tunnels such as civil engineers have designed and constructed for many other uses. The planning, design and construction of the ground surface facilities for a nuclear waste repository involves civil engineering in many ways. The transporation of heavy, metal shielded casks requires special attention to the system of highways and railroads accessing the repository. Structures for handling the shipping casks and transferring the waste onsite and into the deep geologic formation need special considerations. The structures must provide the NRC required containment, including hot cells for remote handling. Therefore, structural design strives for buildings, ventilation structures, shaft headframes, etc., to be earthquake and tornado-proof. These important design bases and considerations for the civil engineer working on a nuclear waste repository are discussed in this paper

Pollution by lead near the Turin--Milan highway

Energy Technology Data Exchange (ETDEWEB)

Sapetti, C; Arduino, E

1973-10-01

Soil samples taken at 5 to 50 m from the Turin-Milan highway at depths ranging from 0 to 30 cm on two different sites were analyzed for lead residues by atomic absorption spectrophotometry following extraction by means of ammoniacal EDTA at pH 9. Soil samples from the surface layer taken in one well-ventilated site contained 11.5 to 12.4 ppM lead, while subsoil samples had 5.7 to 9.8 ppM. Soil samples taken in the other site with poor ventilation contained 23.5 to 43.3 ppM lead in the surface layer, and 9.2 to 15.4 ppM in the subsoil. Decrease of the lead concentrations in the soil with increasing depth and distance from the highway was noted. Plant samples taken from the same sites contained 6.4 to 32.2 ppM lead. Lead was fixed predominantly to the exchange complex; partly to the clay fraction, and partly to the humic fraction.

Use of waste glass in highway construction (update--1992).

Science.gov (United States)

1993-01-01

Increasing pressures to recycle more wastes and minimize the amount of materials placed in landfills are forcing reconsideration of potential uses of waste glass in highway construction and maintenance operations. The federal government and many stat...

Demand Analysis of Logistics Information Matching Platform: A Survey from Highway Freight Market in Zhejiang Province

Science.gov (United States)

Chen, Daqiang; Shen, Xiahong; Tong, Bing; Zhu, Xiaoxiao; Feng, Tao

With the increasing competition in logistics industry and promotion of lower logistics costs requirements, the construction of logistics information matching platform for highway transportation plays an important role, and the accuracy of platform design is the key to successful operation or not. Based on survey results of logistics service providers, customers and regulation authorities to access to information and in-depth information demand analysis of logistics information matching platform for highway transportation in Zhejiang province, a survey analysis for framework of logistics information matching platform for highway transportation is provided.

Residential moving intentions at highway locations: : The trade-off between nuisances and accessibility in the Netherlands

NARCIS (Netherlands)

Hamersma, Marije; Heinen, Eva; Tillema, Taede; Arts, Eric

2015-01-01

This study investigates how highway nuisances are traded off against accessibility gains and other residential characteristics in the moving intentions of people living near highways. It studies a potential mediating role for residential satisfaction and potential mitigating relationships with

Polynomial friction pendulum isolators (PFPIs) for seismic performance control of benchmark highway bridge

Science.gov (United States)

Saha, Arijit; Saha, Purnachandra; Patro, Sanjaya Kumar

2017-10-01

The seismic response of a benchmark highway bridge isolated with passive polynomial friction pendulum isolators (PFPIs) is investigated and subjected to six bidirectional ground motion records. The benchmark study is based on a lumped mass finite-element model of the 91/5 highway overcrossing located in Southern California. The PFPI system possesses two important parameters; one is horizontal flexibility and the other is energy absorbing capacity through friction. The evaluation criteria of the benchmark bridge are analyzed considering two parameters, time period of the isolator and coefficient of friction of the isolation surface. The results of the numerical study are compared with those obtained from the traditional friction pendulum system (FPS). Dual design performance of the PFPI system suppressed the displacement and acceleration response of the benchmark highway bridge. The dual design hysteresis loop of the PFPI system is the main advantage over the linear hysteresis loop of the FPS. The numerical result indicates that the seismic performance of the PFPI system is better than that of the traditional FPS isolated system. Further, it is observed that variations of the isolation time period and coefficient of friction of the FPS and PFPI systems have a significant effect on the peak responses of the benchmark highway bridge.

Level II scour analysis for Bridge 16 (GROTTH00170016) on Town Highway 17, crossing the Wells River, Groton, Vermont

Science.gov (United States)

Striker, L.K.; Ivanoff, M.A.

1997-01-01

This report provides the results of a detailed Level II analysis of scour potential at structure GROTTH00170016 on Town Highway 17 crossing the Wells River, Groton, Vermont (figures 1–8). A Level II study is a basic engineering analysis of the site, including a quantitative analysis of stream stability and scour (U.S. Department of Transportation, 1993). Results of a Level I scour investigation also are included in Appendix E of this report. A Level I investigation provides a qualitative geomorphic characterization of the study site. Information on the bridge, gleaned from Vermont Agency of Transportation (VTAOT) files, was compiled prior to conducting Level I and Level II analyses and is found in Appendix D.

Level II scour analysis for Bridge 37, (BRNETH00740037) on Town Highway 74, crossing South Peacham Brook, Barnet, Vermont

Science.gov (United States)

Burns, Ronda L.; Severance, Timothy

1997-01-01

This report provides the results of a detailed Level II analysis of scour potential at structure BRNETH00740037 on Town Highway 74 crossing South Peacham Brook, Barnet, Vermont (figures 1–8). A Level II study is a basic engineering analysis of the site, including a quantitative analysis of stream stability and scour (U.S. Department of Transportation, 1993). Results of a Level I scour investigation also are included in Appendix E of this report. A Level I investigation provides a qualitative geomorphic characterization of the study site. Information on the bridge, gleaned from Vermont Agency of Transportation (VTAOT) files, was compiled prior to conducting Level I and Level II analyses and is found in Appendix D.

Propensity scores-potential outcomes framework to incorporate severity probabilities in the highway safety manual crash prediction algorithm.

Science.gov (United States)

Sasidharan, Lekshmi; Donnell, Eric T

2014-10-01

Accurate estimation of the expected number of crashes at different severity levels for entities with and without countermeasures plays a vital role in selecting countermeasures in the framework of the safety management process. The current practice is to use the American Association of State Highway and Transportation Officials' Highway Safety Manual crash prediction algorithms, which combine safety performance functions and crash modification factors, to estimate the effects of safety countermeasures on different highway and street facility types. Many of these crash prediction algorithms are based solely on crash frequency, or assume that severity outcomes are unchanged when planning for, or implementing, safety countermeasures. Failing to account for the uncertainty associated with crash severity outcomes, and assuming crash severity distributions remain unchanged in safety performance evaluations, limits the utility of the Highway Safety Manual crash prediction algorithms in assessing the effect of safety countermeasures on crash severity. This study demonstrates the application of a propensity scores-potential outcomes framework to estimate the probability distribution for the occurrence of different crash severity levels by accounting for the uncertainties associated with them. The probability of fatal and severe injury crash occurrence at lighted and unlighted intersections is estimated in this paper using data from Minnesota. The results show that the expected probability of occurrence of fatal and severe injury crashes at a lighted intersection was 1 in 35 crashes and the estimated risk ratio indicates that the respective probabilities at an unlighted intersection was 1.14 times higher compared to lighted intersections. The results from the potential outcomes-propensity scores framework are compared to results obtained from traditional binary logit models, without application of propensity scores matching. Traditional binary logit analysis suggests that

Conceptual Model for Smart Cities: Irrigation and Highway Lamps using IoT

OpenAIRE

Vijender Kumar Solanki; M. Venkaesan; Somesh Katiyar

2017-01-01

Keeping in mind the need to preserve energy as well as utilize the available at its best the need was felt to develop a module that would be able to sort out the problem where resources such as water and electricity were wasted, in urban as well as rural area. Resource (electricity) was wasted as beside the point operation of Highway and High Mast Lamp; while wastage of water followed by improper trends and methodologies imparted for watering of city park, road side plantation and highway pla...

The research on data organization technology in the highway geographic information system

Science.gov (United States)

Tian, Zhihui; Wu, Fang; Zeng, Yuhuai

2008-10-01

Data are the basis of GIS. It has direct impact on the efficiency and function of a Highway Geographic Information System (HGIS), because of the characteristics of data model and data organization of the traffic geographic information system such as spatial property, multi-path network, linearity. This paper discussed the data property of HGIS, studied and presented the HGIS spatial data on multi-source and model. Also, it described and verified highway geographical feature of special subject data's linearity, dynamic and multiple-path network property in HGIS.

Simulating quantum state engineering in spontaneous parametric down-conversion using classical light

CSIR Research Space (South Africa)

Zhang, Y

2014-07-01

Full Text Available range of pump beams for quantum state engineering and confirm that the results are in agreement with theory. Our approach offers high photon count rates, is quick to yield results and can easily be converted back to a SPDC setup. It is likely to be a...

A Review of Semivolatile and Volatile Organic Compounds in Highway Runoff and Urban Stormwater

Science.gov (United States)

Lopes, Thomas J.; Dionne, Shannon G.

1998-01-01

Many studies have been conducted since 1970 to characterize concentrations of semivolatile organic compounds (SVOCs) in highway runoff and urban stormwater. To a lesser extent, studies also have characterized concentrations of volatile organic compounds (VOCs), estimated loads of SVOCs, and assessed potential impacts of these contaminants on receiving streams. This review evaluates the quality of existing data on SVOCs and VOCs in highway runoff and urban storm- water and summarizes significant findings. Studies related to highways are emphasized when possible. The review included 44 articles and reports that focused primarily on SVOCs and VOCs. Only 17 of these publications are related to highways, and 5 of these 17 are themselves review papers. SVOCs in urban stormwater and sediments during the late 1970's to mid-1980's were the subject of most studies. Criteria used to evaluate data quality included documentation of sampling protocols, analytical methods, minimum reporting limit (MRL) or method detection limit (MDL), qualityassurance protocols, and quality-control samples. The largest deficiency in documenting data quality was that only 10 percent of the studies described where water samples were collected in the stream cross section. About 80 percent of SVOCs in runoff are in the suspended solids. Because suspended solids can vary significantly even in narrow channels, concentrations from discrete point samples and contaminant loads estimated from those samples are questionable without information on sample location or how well streamflow was mixed. Thirty percent or fewer of the studies documented the MRL, MDL, cleaning of samplers, or use of field quality-control samples. Comparing results of different studies and evaluating the quality of environmental data, especially for samples with low concentrations, is difficult without this information. The most significant factor affecting SVOC concentrations in water is suspended solids concentration. In sediment

Discussion on the method of environmental radiological impact assessment for the highway construction project

International Nuclear Information System (INIS)

Qiu Guohua

2008-01-01

Based on the characteristics and environmental radiological impact of the highway construction project, the basic procedure of environmental radiological impact assessment for the highway construction project is put forward, including analysis and determination of contamination sources, selection of evaluation factors, determination of assessment range and dose limit, environmental investigation, environmental impact prediction and assessment. The working method of each procedure is analyzed. (authors)

Incorporating travel time reliability into the Highway Capacity Manual.

Science.gov (United States)

2014-01-01

This final report documents the activities performed during SHRP 2 Reliability Project L08: Incorporating Travel Time Reliability into the Highway Capacity Manual. It serves as a supplement to the proposed chapters for incorporating travel time relia...

23 CFR 750.708 - Acceptance of state zoning.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Acceptance of state zoning. 750.708 Section 750.708... BEAUTIFICATION Outdoor Advertising Control § 750.708 Acceptance of state zoning. (a) 23 U.S.C. 131(d) provide... within areas . . . which are zoned industrial or commercial under authority of State law.” Section 131(d...

Tillandsia usneoides: a successful alternative for biomonitoring changes in air quality due to a new highway in São Paulo, Brazil.

Science.gov (United States)

Cardoso-Gustavson, Poliana; Fernandes, Francine Faia; Alves, Edenise Segala; Victorio, Mariana Pereira; Moura, Barbara Baesso; Domingos, Marisa; Rodrigues, Caroline Albuquerque; Ribeiro, Andreza Portella; Nievola, Catarina Carvalho; Figueiredo, Ana Maria G

2016-01-01

Tillandsia usneoides is an aerial epiphytic bromeliad that absorbs water and nutrients directly from the atmosphere by scales covering its surface. We expanded the use of this species as a broader biomonitor based on chemical and structural markers to detect changes in air quality. The usefulness of such comprehensive approach was tested during the construction and opening of a highway (SP-21) in São Paulo State, Brazil. The biomonitoring study was performed from 2009 to 2012, thus comprising the period during construction and after the highway inauguration. Metal accumulation and structural alterations were assessed, in addition to microscopy analyses to understand the metal chelation in plant tissues and to assess the causes of alterations in the number and shape of scale cells. Altogether, our analyses support the use of this species as a wide biomonitor of air quality in urbanized areas.

A comparative study of wood highway sound barriers

Science.gov (United States)

Stefan Grgurevich; Thomas Boothby; Harvey Manbeck; Courtney Burroughs; Stephen Cegelka; Craig Bernecker; Michael A. Ritter

2002-01-01

Prototype designs for wood highway sound barriers meeting the multiple criteria of structural integrity, acoustic effectiveness, durability, and potential for public acceptance have been developed. Existing installations of wood sound barriers were reviewed and measurements conducted in the field to estimate acoustic insertion losses. A complete matrix of design...

A Synopsis of Technical Issues for Monitoring Sediment in Highway and Urban Runoff

Science.gov (United States)

Bent, Gardner C.; Gray, John R.; Smith, Kirk P.; Glysson, G. Douglas

2000-01-01

Accurate and representative sediment data are critical for assessing the potential effects of highway and urban runoff on receiving waters. The U.S. Environmental Protection Agency identified sediment as the most widespread pollutant in the Nation's rivers and streams, affecting aquatic habitat, drinking water treatment processes, and recreational uses of rivers, lakes, and estuaries. Representative sediment data are also necessary for quantifying and interpreting concentrations, loads, and effects of trace elements and organic constituents associated with highway and urban runoff. Many technical issues associated with the collecting, processing, and analyzing of samples must be addressed to produce valid (useful for intended purposes), current, complete, and technically defensible data for local, regional, and national information needs. All aspects of sediment data-collection programs need to be evaluated, and adequate quality-control data must be collected and documented so that the comparability and representativeness of data obtained for highway- and urban-runoff studies may be assessed. Collection of representative samples for the measurement of sediment in highway and urban runoff involves a number of interrelated issues. Temporal and spatial variability in runoff result from a combination of factors, including volume and intensity of precipitation, rate of snowmelt, and features of the drainage basin such as area, slope, infiltration capacity, channel roughness, and storage characteristics. In small drainage basins such as those found in many highway and urban settings, automatic samplers are often the most suitable method for collecting samples of runoff for a variety of reasons. Indirect sediment-measurement methods are also useful as supplementary and(or) surrogate means for monitoring sediment in runoff. All of these methods have limitations in addition to benefits, which must be identified and quantified to produce representative data. Methods for

Implementation of GPS controlled highway construction equipment, phase III.

Science.gov (United States)

2009-02-01

Beginning in 2006, WisDOT and the Construction Material and Support Center (CMSC) at UW-Madison worked : together to develop the specifications and the QA/QC procedures for GPS machine guidance on highway grading : projects. These specifications and ...

On-the-spot damage detection methodology for highway bridges.

Science.gov (United States)

2010-07-01

Vibration-based damage identification (VBDI) techniques have been developed in part to address the problems associated with an aging civil infrastructure. To assess the potential of VBDI as it applies to highway bridges in Iowa, three applications of...

Consideration of time-evolving capacity distributions and improved degradation models for seismic fragility assessment of aging highway bridges

International Nuclear Information System (INIS)

Ghosh, Jayadipta; Sood, Piyush

2016-01-01

This paper presents a methodology to develop seismic fragility curves for deteriorating highway bridges by uniquely accounting for realistic pitting corrosion deterioration and time-dependent capacity distributions for reinforced concrete columns under chloride attacks. The proposed framework offers distinct improvements over state-of-the-art procedures for fragility assessment of degrading bridges which typically assume simplified uniform corrosion deterioration model and pristine limit state capacities. Depending on the time in service life and deterioration mechanism, this study finds that capacity limit states for deteriorating bridge columns follow either lognormal distribution or generalized extreme value distributions (particularly for pitting corrosion). Impact of column degradation mechanism on seismic response and fragility of bridge components and system is assessed using nonlinear time history analysis of three-dimensional finite element bridge models reflecting the uncertainties across structural modeling parameters, deterioration parameters and ground motion. Comparisons are drawn between the proposed methodology and traditional approaches to develop aging bridge fragility curves. Results indicate considerable underestimations of system level fragility across different damage states using the traditional approach compared to the proposed realistic pitting model for chloride induced corrosion. Time-dependent predictive functions are provided to interpolate logistic regression coefficients for continuous seismic reliability evaluation along the service life with reasonable accuracy. - Highlights: • Realistic modeling of chloride induced corrosion deterioration in the form of pitting. • Time-evolving capacity distribution for aging bridge columns under chloride attacks. • Time-dependent seismic fragility estimation of highway bridges at component and system level. • Mathematical functions for continuous tracking of seismic fragility along service

49 CFR 1242.20 - Highway grade crossings (accounts XX-17-22 and XX-18-22).

Science.gov (United States)

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Highway grade crossings (accounts XX-17-22 and XX... RAILROADS 1 Operating Expenses-Way and Structures § 1242.20 Highway grade crossings (accounts XX-17-22 and XX-18-22). Separate running and switching common expenses according to distribution of the running...

Montana Highway Safety Improvement Program : an RSPCB Peer Exchange

Science.gov (United States)

2011-05-01

This report provides a summary of a peer-to-peer (P2P) videoconference sponsored by the : Montana Department of Transportation (MDT) and the Federal Highway Administration : (FHWA) Office of Safety. The videoconference format provided a low-cost oppo...

Evaluation and Selection of Renewable Energy Technologies for Highway Maintenance Facilities

Science.gov (United States)

Andrews, Taylor

The interest in renewable energy has been increasing in recent years as attempts to reduce energy costs as well the consumption of fossil fuels are becoming more common. Companies and organizations are recognizing the increasing reliance on limited fossil fuels' resources, and as competition and costs for these resources grow, alternative solutions are becoming more appealing. Many federally run buildings and associations also have the added pressure of meeting the mandates of federal energy policies that dictate specific savings or reductions. Federal highway maintenance facilities run by the Department of Transportation fall into this category. To help meet energy saving goals, an investigation into potential renewable energy technologies was completed for the Ohio Department of Transportation. This research examined several types of renewable energy technologies and the major factors that affect their performance and evaluated their potential for implementation at highway maintenance facilities. Facilities energy usage data were provided, and a facility survey and site visits were completed to enhance the evaluation of technologies and the suitability for specific projects. Findings and technology recommendations were presented in the form of selection matrices, which were designed to help make selections in future projects. The benefits of utilization of other tools such as analysis software and life cycle assessments were also highlighted. These selection tools were designed to be helpful guides when beginning the pursuit of a renewable energy technology for highway maintenance facilities, and can be applied to other similar building types and projects. This document further discusses the research strategies and findings as well as the recommendations that were made to the personnel overseeing Ohio's highway maintenance facilities.

Fracture Mechanics Prediction of Fatigue Life of Aluminum Highway Bridges

DEFF Research Database (Denmark)

Rom, Søren; Agerskov, Henning

2015-01-01

Fracture mechanics prediction of the fatigue life of aluminum highway bridges under random loading is studied. The fatigue life of welded joints has been determined from fracture mechanics analyses and the results obtained have been compared with results from experimental investigations. The fati......Fracture mechanics prediction of the fatigue life of aluminum highway bridges under random loading is studied. The fatigue life of welded joints has been determined from fracture mechanics analyses and the results obtained have been compared with results from experimental investigations...... against fatigue in aluminum bridges, may give results which are unconservative. Furthermore, it was in both investigations found that the validity of the results obtained from Miner's rule will depend on the distribution of the load history in tension and compression....

Lessons learned by southern states in designating alternative routes

International Nuclear Information System (INIS)

1989-08-01

The purpose of this report is to discuss the ''lessons learned'' by the five states within the southem region that have designated alternative or preferred routes under the regulations of the Department of Transportation (DOT) established for the transportation of radioactive materials. The document was prepared by reviewing applicable federal laws and regulations, examining state reports and documents and contacting state officials and routing agencies involved in making routing decisions. In undertaking this project, the Southern States Energy Board hopes to reveal the process used by states that have designated alternative routes and thereby share their experiences (i.e., lessons learned) with other southern states that have yet to make designations. Under DOT regulations (49 CFR 177.826), carriers of highway route controlled quantities of radioactive materials (which include spent nuclear fuel and high-level waste) must use preferred routes selected to reduce time in transit. Such preferred routes consist of (1) an interstate system highway with use of an interstate system bypass or beltway around cities when available, and (2) alternate routes selected by a ''state routing agency.''

Developing a Highway Safety Fundamentals Course : Research Project Capsule

Science.gov (United States)

2012-10-01

Although the need for road : safety education was fi rst : recognized in the 1960s, : recently it has become an : increasingly urgent issue. To : fulfi ll the hefty goal set up by : the AASHTO Highway : Safety Strategy (cutting : traffi c fatalities ...

Risk-based asset management methodology for highway infrastructure systems.

Science.gov (United States)

2004-01-01

Maintaining the infrastructure of roads, highways, and bridges is paramount to ensuring that these assets will remain safe and reliable in the future. If maintenance costs remain the same or continue to escalate, and additional funding is not made av...

Slope mass rating and kinematic analysis of slopes along the national highway-58 near Jonk, Rishikesh, India

Directory of Open Access Journals (Sweden)

Tariq Siddique

2015-10-01

Full Text Available The road network in the Himalayan terrain, connecting remote areas either in the valleys or on the hill slopes, plays a pivotal role in socio-economic development of India. The planning, development and even maintenance of road and rail networks in such precarious terrains are always a challenging task because of complexities posed by topography, geological structures, varied lithology and neotectonics. Increasing population and construction of roads have led to destabilisation of slopes, thus leading to mass wasting and movement, further aggravation due to recent events of cloud bursts and unprecedented flash floods. Vulnerability analysis of slopes is an important component for the “Landslide Hazard Assessment” and “Slope Mass Characterisation” guide planners to predict and choose suitable ways for construction of roads and other engineering structures. The problem of landslides along the national highway-58 (NH-58 from Rishikesh to Devprayag is a common scene. The slopes along the NH-58 between Jonk and Rishikesh were investigated, which experienced very heavy traffic especially from March to August due to pilgrimage to Kedarnath shrine. On the basis of slope mass rating (SMR investigation, the area falls in stable class, and landslide susceptibility score (LSS values also indicate that the slopes under investigation fall in low to moderate vulnerability to landslide. More attentions should be paid to the slopes to achieve greater safe and economic benefits along the highway.

The development of highway nuisance perception. Experiences of residents along the Southern Ring Road in Groningen, the Netherlands.

OpenAIRE

Hamersma, M; Heinen, E; Tillema, T; Arts, J

2017-01-01

The perception of highway nuisance i.e. noises, air pollution and barrier-effects, is associated with negative effects on health and quality of life. This study aims to gain a deeper understanding of the development of highway nuisance perception among residents. Interviews were conducted with residents in 32 households living along the Southern Ring Road, a highway which crosses various neighbourhoods in the city of Groningen, the Netherlands. Various themes emerged from the interviews which...

Proceedings of the 1991 national conference on hydraulic engineering

International Nuclear Information System (INIS)

Shane, R.M.

1991-01-01

This book contains the proceedings of the 1991 National Conference of Hydraulic Engineering. The conference was held in conjunction with the International Symposium on Ground Water and a Software Exchange that facilitated exchange of information on recent software developments of interest to hydraulic engineers. Also included in the program were three mini-symposia on the Exclusive Economic Zone, Data Acquisition, and Appropriate Technology. Topics include sedimentation; appropriate technology; exclusive economic zone hydraulics; hydraulic data acquisition and display; innovative hydraulic structures and water quality applications of hydraulic research, including the hydraulics of aerating turbines; wetlands; hydraulic and hydrologic extremes; highway drainage; overtopping protection of dams; spillway design; coastal and estuarine hydraulics; scale models; computation hydraulics; GIS and expert system applications; watershed response to rainfall; probabilistic approaches; and flood control investigations

Model Wind Turbine Design in a Project-Based Middle School Engineering Curriculum Built on State Frameworks

Science.gov (United States)

Cogger, Steven D.; Miley, Daniel H.

2012-01-01

This paper proposes that project-based active learning is a key part of engineering education at the middle school level. One project from a comprehensive middle school engineering curriculum developed by the authors is described to show how active learning and state frameworks can coexist. The theoretical basis for learning and assessment in a…

Highway pavement failure induced by poor soil geotechnical ...

African Journals Online (AJOL)

X-ray diffraction studies showed the presence of abundant kaolinite peaks and a subdued goethite peak without any trace of montmorrilonite. The presence of excess fines in the pavement construction materials (soils) contributed to the failure of the highway pavement at this locality. The low CBR value is also a noted cause ...

Tomorrow's engineers through teacher/student programs at Penn State

International Nuclear Information System (INIS)

Davidson, C.

1992-01-01

Interest in math and science increases when the problems and topics are current and socially relevant. A course that integrates various sciences requires a solid foundation in mathematics and an understanding that real life consists of an interaction of the basic sciences. One topical area that requires the understanding of math and science and affects our society is radiation. Although nuclear issues are prevalent in the news, very few secondary science educators receive much formal training in radiation and nuclear science. A strong push for educational programs on this topic by the U.S. Atomic Energy Commission and state departments of education began in the late 1960s and early 1970s. Through this effort, Pennsylvania State University (Penn State) developed the Nuclear Concepts Institute for secondary science teachers and has continued its involvement with educational programs in nuclear science for teachers and students. From discussions with teachers and students along with formal and informal surveys, the programs have had a positive impact on teachers' interest in learning more about nuclear science and on students' choices to enter nuclear engineering or a related field. The paper discusses the Nuclear Concepts Program; formation of the American Nuclear Science Teachers Association (ANSTA); ANSTA projects; other Penn State educational programs; and impact of education programs

Highway Safety Manual applied in Missouri - freeway/software : research summary.

Science.gov (United States)

2016-03-01

AASHTOs Highway Safety Manual (HSM) : includes models for freeway segments, speedchange : lanes (transitional area between mainline : and ramps), ramps, and interchange terminals. : These predictive models for freeway : interchanges need to be cal...

Level II scour analysis for Bridge 81 (MARSUS00020081) on U.S. Highway 2, crossing the Winooski River, Marshfield, Vermont

Science.gov (United States)

Ivanoff, Michael A.

1997-01-01

This report provides the results of a detailed Level II analysis of scour potential at structure MARSUS00020081 on U.S. Highway 2 crossing the Winooski River, Marshfield, Vermont (figures 1–8). A Level II study is a basic engineering analysis of the site, including a quantitative analysis of stream stability and scour (U.S. Department of Transportation, 1993). Results of a Level I scour investigation also are included in Appendix E of this report. A Level I investigation provides a qualitative geomorphic characterization of the study site. Information on the bridge, gleaned from Vermont Agency of Transportation (VTAOT) files, was compiled prior to conducting Level I and Level II analyses and is found in Appendix D.

Citizen, Science, Highways, and Wildlife: Using a Web-based GIS to Engage Citizens in Collecting Wildlife Information

Directory of Open Access Journals (Sweden)

Tracy Lee

2006-06-01

Full Text Available Road Watch in the Pass is a citizen-science project that engages local citizens in reporting wildlife observations along a 44-km stretch of Highway 3 through Crowsnest Pass in southwestern Alberta, Canada. The numbers of wildlife vehicle collisions and a recent proposal to expand the highway have raised concerns from both human safety and wildlife conservation perspectives. Through the use of a web-based GIS, interested citizens can contribute information that will be instrumental in making final decisions concerning measures to mitigate the effects of highway expansion. Currently, 58 people have contributed over 713 observations to Road Watch. We performed a preliminary comparison of 11 months of Road Watch observations and wildlife mortality data for the same time period to demonstrate that the use of citizen science not only augments more conventional approaches, but also results in the emergence of new knowledge and insights. A Kappa index of agreement of 14% indicates poor agreement between the data sets, highlighting that wildlife successfully cross the highway in areas not identified by the wildlife mortality data. This has important implications for design and mitigation efforts for Highway 3 and other roadways.

Autonomous Highway Systems Safety and Security

OpenAIRE

Sajjad, Imran

2017-01-01

Automated vehicles are getting closer each day to large-scale deployment. It is expected that self-driving cars will be able to alleviate traffic congestion by safely operating at distances closer than human drivers are capable of and will overall improve traffic throughput. In these conditions, passenger safety and security is of utmost importance. When multiple autonomous cars follow each other on a highway, they will form what is known as a cyber-physical system. In a general setting, t...

Efficient use of highway capacity summary : report to Congress

Science.gov (United States)

2009-11-01

This report was developed to summarize the implementation of safety shoulders as travel lanes as a method to increase the efficient use of highway capacity. Its purpose is to provide a succinct overview of efforts to use left or right shoulder lanes ...

Traffic control and intelligent vehicle highway systems: a survey

NARCIS (Netherlands)

Baskar, L.D.; Schutter, B. de; Hellendoorn, J.; Papp, Z.

2011-01-01

Traffic congestion in highway networks is one of the main issues to be addressed by today's traffic management schemes. Automation combined with the increasing market penetration of on-line communication, navigation and advanced driver assistance systems will ultimately result in intelligent vehicle

Energy use and engineering audits at state-owned facilities in Minnesota

Energy Technology Data Exchange (ETDEWEB)

Hirst, E.

1980-01-01

The contents and results of two large computerized data bases maintained by the Minnesota Department of Administration are described and analyzed. One contains information on monthly fuel use from 1972 through 1978 for 42 large state facilities: community colleges, state universities, hospitals, prisons, and office buildings. The second contains the results of detailed engineering audits performed at 41 such institutions. The audits cover 270 buildings and include 2010 individual energy conservation recommendations. Several data base management issues are discussed. These include errors and their identification, development of simple and consistent definitions for key terms, and collection of information on the major determinants of energy use and conservation potentials at these facilities.

Thermoacoustics of solids: A pathway to solid state engines and refrigerators

Science.gov (United States)

Hao, Haitian; Scalo, Carlo; Sen, Mihir; Semperlotti, Fabio

2018-01-01

Thermoacoustic oscillations have been one of the most exciting discoveries of the physics of fluids in the 19th century. Since its inception, scientists have formulated a comprehensive theoretical explanation of the basic phenomenon which has later found several practical applications to engineering devices. To date, all studies have concentrated on the thermoacoustics of fluid media where this fascinating mechanism was exclusively believed to exist. Our study shows theoretical and numerical evidence of the existence of thermoacoustic instabilities in solid media. Although the underlying physical mechanism exhibits some interesting similarities with its counterpart in fluids, the theoretical framework highlights relevant differences that have important implications on the ability to trigger and sustain the thermoacoustic response. This mechanism could pave the way to the development of highly robust and reliable solid-state thermoacoustic engines and refrigerators.

Transportation planning implications of automated/connected vehicles on Texas highways.

Science.gov (United States)

2017-04-01

This research project was focused on the transportation planning implications of automated/connected : vehicles (AV/CVs) on Texas highways. The research assessed how these potentially transformative : technologies can be included in transportation pl...

Weighted radial dimension: an improved fractal measurement for highway transportation networks distribution

Science.gov (United States)

Feng, Yongjiu; Liu, Miaolong; Tong, Xiaohua

2007-06-01

An improved fractal measurement, the weighted radial dimension, is put forward for highway transportation networks distribution. The radial dimension (DL), originated from subway investigation in Stuttgart, is a fractal measurement for transportation systems under ideal assumption considering all the network lines to be homogeneous curves, ignoring the difference on spatial structure, quality and level, especially the highway networks. Considering these defects of radial dimension, an improved fractal measurement called weighted radial dimension (D WL) is introduced and the transportation system in Guangdong province is studied in detail using this novel method. Weighted radial dimensions are measured and calculated, and the spatial structure, intensity and connectivity of transportation networks are discussed in Guangdong province and the four sub-areas: the Pearl River Delta area, the East Costal area, the West Costal area and the Northern Guangdong area. In Guangdong province, the fractal spatial pattern characteristics of transportation system vary remarkably: it is the highest in the Pearl River Delta area, moderate in Costal area and lowest in the Northern Guangdong area. With the Pearl River Delta area as the centre, the weighted radial dimensions decrease with the distance increasing, while the decline level is smaller in the costal area and greater in the Northern Guangdong province. By analysis of the conic of highway density, it is recognized that the density decrease with the distance increasing from the calculation centre (Guangzhou), demonstrating the same trend as weighted radial dimensions shown. Evidently, the improved fractal measurement, weighted radial dimension, is an indictor describing the characteristics of highway transportation system more effectively and accurately.

Approximation Algorithms for the Highway Problem under the Coupon Model

Science.gov (United States)

Hamane, Ryoso; Itoh, Toshiya; Tomita, Kouhei

When a store sells items to customers, the store wishes to decide the prices of items to maximize its profit. Intuitively, if the store sells the items with low (resp. high) prices, the customers buy more (resp. less) items, which provides less profit to the store. So it would be hard for the store to decide the prices of items. Assume that the store has a set V of n items and there is a set E of m customers who wish to buy the items, and also assume that each item i ∈ V has the production cost di and each customer ej ∈ E has the valuation vj on the bundle ej ⊆ V of items. When the store sells an item i ∈ V at the price ri, the profit for the item i is pi = ri - di. The goal of the store is to decide the price of each item to maximize its total profit. We refer to this maximization problem as the item pricing problem. In most of the previous works, the item pricing problem was considered under the assumption that pi ≥ 0 for each i ∈ V, however, Balcan, et al. [In Proc. of WINE, LNCS 4858, 2007] introduced the notion of “loss-leader, ” and showed that the seller can get more total profit in the case that pi < 0 is allowed than in the case that pi < 0 is not allowed. In this paper, we consider the line highway problem (in which each customer is interested in an interval on the line of the items) and the cycle highway problem (in which each customer is interested in an interval on the cycle of the items), and show approximation algorithms for the line highway problem and the cycle highway problem in which the smallest valuation is s and the largest valuation is l (this is called an [s, l]-valuation setting) or all valuations are identical (this is called a single valuation setting).

Evaluation of bridge decks using non-destructive evaluation (NDE) at near highway speeds for effective asset management.

Science.gov (United States)

2015-06-01

Remote sensing technologies allow for the condition evaluation of bridge decks at near highway speed. : Data collection at near highway speed for assessment of the top of the concrete deck and proof of : concept testing for the underside of the deck ...

Risk assessment of wind turbines close to highways

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Sørensen, Jens Nørkær; Lemming, Jørgen Kjærgaard

2012-01-01

with a spacing of 400m. As an example the generally accepted risk on highways in increased with less than 0.1% in wind turbines are installed more than 150 meters from the highway. The risk due to ice throw from a wind turbine in operation is seen to be slightly greater than the risk if the wind turbine......) and a spacing of 400-500 m along the road. The studies show that the probability per kilometer that a person in a vehicle is killed due to total or partial collapse (damage) of a wind turbine can be assumed to be of minor importance. The probability per kilometer will be less than 5 10-12 for wind turbines...... that are more than 60 meters from the road. This risk is considered acceptable using the ALARP principle and comparing with the general, well-documented risk on roads in Denmark which in 2009 was 2 10-9. The analysis also shows that the height of the turbines and the distance between them is of less importance...

Impact of highway construction on water bodies: a geospatial assessment.

Science.gov (United States)