WorldWideScience

Sample records for state electricity boards

  1. Restructuring the State Electricity Boards (SEB'S) in India: the case of HSEB

    Energy Technology Data Exchange (ETDEWEB)

    Kanika, T.Bhal [Haryana State Electricity Board, HSEB, Dept. of Management (India); Abhishek, Kalra; Madhuri, Agarwal [Haryana State Electricity Board, HSEB, B. Tech, Mechanical Engineering (India)

    2001-11-01

    In India, power generation and distribution is the responsibility of the different States that have their own electricity boards through which this is done. Of late, in the wake of liberalization, many attempts have been made to reform the power sector, in the light of the poor performance of these boards. The Haryana State Electricity Board (HSEB) is the primary supplier of power in one of the States called Haryana. For quite some years, it was facing problems with revenues, low PLF etc. A review was done and counselling help sought from prominent Consultancy firms. As a result a large scale restructuring was planned. The present paper looks at the attempts of HSEB at restructuring and the consequences of the restructuring efforts. (authors)

  2. Purchase of power by State Electricity Boards from biomass gasifier systems: formulating a long term national policy

    International Nuclear Information System (INIS)

    Jain, B.C.

    1992-01-01

    Current policy for purchase of power from renewable sources of energy by State Electricity Boards in India is examined and certain changes in that policy are suggested. State Electricity Boards are reluctant to buy power from renewables as such a purchase is seen by the Boards as being of against their economic interests. But if socio-environmental and climatological costs of power of thermal plants are taken into consideration, it becomes imperative that a long term policy for power purchase from renewables by electricity boards will have to be followed. Such a policy is outlined. After giving formulae for unit cost of generation from thermal power plants, diesel generation (DG) sets and biomass gasification, it is recommended that basis for the purchase price for power generated through biomass gas should be the cost of generation through DG sets or cost of generation through biomass gasification whichever is lower. A clause for automatic price escalation should also be a part of such policy. Some measures to compensate electricity boards for purchase of power from renewables are suggested. They include levying of a special surcharge by boards on their electricity sales and funding by the Central Government. (M.G.B.)

  3. Winners and losers of state electricity boards reforms an organisational analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ruet, J.

    2001-01-01

    The power sector in India is often described - in newspapers, in official reports, in reform programmes - as too 'poor' in money... and too 'rich' in politicians. These analyses hence propose corporatisation, un-bundling, setting up of regulatory commissions, as a vade mecum. The sole problem is that they have proved insufficient in improving the health of State Electricity Boards (SEBs). The ultimate tool, privatisation, has also been a deceptive one. This paper suggests that the above analyses should be balanced and completed with another element: the internal organisation itself of SEBs has to be questioned, which, surprisingly enough, is not done in the current reforms. This is not done because SEBs actually behave and are organised as administrations, whose objectives are different from those of a public enterprise. This is not done because consultants implicitly regard SEBs as inefficient enterprises. This paper thus enters into the black box of SEBs, and shows why and how the behaviour of its agents is rational, given the administrative system in which they are. It gives some practical ways to change this system, by developing on the 'enterprisation' of SEBs (turning them from bodies with an administration-style way of running into actual public enterprises), a concept which was coined from the reforms in Eastern Europe. But ultimately reforms are not undertaken per se. Their final aim is a better quality and availability to the people. Their impact on various categories of users and stakeholders can be discussed within this framework of enterprisation, to establish on which conditions reforms can be beneficial to everybody but the 'waste consumer'. This article is mainly based on repeated field inquires in Haryana, Andhra Pradesh and Orissa, at different stages of reform. In these States, the reform, far from precluding to analyse what are classical SEBs, brought to light some processes formerly in the dark. This

  4. The reform of the Indian power sector: administrations for sale. Transforming the state electricity boards into enterprises; La reforme du secteur electrique de l'Inde: administrations a vendre. Transformer les state electricity boards en entreprises

    Energy Technology Data Exchange (ETDEWEB)

    Ruet, J

    2001-10-01

    The present thesis is about the reforms in the electricity sector in India, and more specifically about those in the State Electricity Boards (SEBs), organisations responsible for generation, transmission and distribution of electricity at the level of each of the States of India. The thesis is interested in practical questions of industrial economy such as: what is the impact of de-integration on the functioning of the SEBs?, impact of the creation of regulatory committees?, of privatisation?. Going beyond the critical analysis of the proposed reforms, the thesis also puts forward certain practical propositions as regards the way of reforming the SEBs. The thesis is divided in two parts (of four chapters each). The first part analyses and characterizes the functioning of a SEB. It presents practical description of the organisational characteristics, but also of their linking to the decision making mechanisms at work. On the theoretical plane, it settles the debate on the validity of the analytical concept of soft budget constraint for a SEB, and specifies the modalities of an analysis in terms of property rights, as well as the pertinence of several concepts derived from that of cost. The second part deals with the ongoing reforms and those to be implemented. It defines the concept of enterprising and proposes a critical discussion of the ongoing reforms, in the light of the normative criterion of enterprisation. It distinguishes conceptually and in the practical analysis, the 'structural' reforms (corporatisation, de-integration, and setting up of regulatory commissions) on the one hand and the questions of privatisation on the other. It proposes a model explaining the 'trade off' between public enterprisation and rapid privatisation. The first chapter situates the SEBs in the Indian power sector, shows the limit of the analyses in terms of lack of funds or political interference. Chapter 2 makes a critical presentation of the various tools

  5. The reform of the Indian power sector: administrations for sale. Transforming the state electricity boards into enterprises

    International Nuclear Information System (INIS)

    Ruet, J.

    2001-10-01

    The present thesis is about the reforms in the electricity sector in India, and more specifically about those in the State Electricity Boards (SEBs), organisations responsible for generation, transmission and distribution of electricity at the level of each of the States of India. The thesis is interested in practical questions of industrial economy such as: what is the impact of de-integration on the functioning of the SEBs?, impact of the creation of regulatory committees?, of privatisation?. Going beyond the critical analysis of the proposed reforms, the thesis also puts forward certain practical propositions as regards the way of reforming the SEBs. The thesis is divided in two parts (of four chapters each). The first part analyses and characterizes the functioning of a SEB. It presents practical description of the organisational characteristics, but also of their linking to the decision making mechanisms at work. On the theoretical plane, it settles the debate on the validity of the analytical concept of soft budget constraint for a SEB, and specifies the modalities of an analysis in terms of property rights, as well as the pertinence of several concepts derived from that of cost. The second part deals with the ongoing reforms and those to be implemented. It defines the concept of enterprising and proposes a critical discussion of the ongoing reforms, in the light of the normative criterion of enterprisation. It distinguishes conceptually and in the practical analysis, the 'structural' reforms (corporatisation, de-integration, and setting up of regulatory commissions) on the one hand and the questions of privatisation on the other. It proposes a model explaining the 'trade off' between public enterprisation and rapid privatisation. The first chapter situates the SEBs in the Indian power sector, shows the limit of the analyses in terms of lack of funds or political interference. Chapter 2 makes a critical presentation of the various tools offered to the

  6. A comprehensive review of on-board State-of-Available-Power prediction techniques for lithium-ion batteries in electric vehicles

    Science.gov (United States)

    Farmann, Alexander; Sauer, Dirk Uwe

    2016-10-01

    This study provides an overview of available techniques for on-board State-of-Available-Power (SoAP) prediction of lithium-ion batteries (LIBs) in electric vehicles. Different approaches dealing with the on-board estimation of battery State-of-Charge (SoC) or State-of-Health (SoH) have been extensively discussed in various researches in the past. However, the topic of SoAP prediction has not been explored comprehensively yet. The prediction of the maximum power that can be applied to the battery by discharging or charging it during acceleration, regenerative braking and gradient climbing is definitely one of the most challenging tasks of battery management systems. In large lithium-ion battery packs because of many factors, such as temperature distribution, cell-to-cell deviations regarding the actual battery impedance or capacity either in initial or aged state, the use of efficient and reliable methods for battery state estimation is required. The available battery power is limited by the safe operating area (SOA), where SOA is defined by battery temperature, current, voltage and SoC. Accurate SoAP prediction allows the energy management system to regulate the power flow of the vehicle more precisely and optimize battery performance and improve its lifetime accordingly. To this end, scientific and technical literature sources are studied and available approaches are reviewed.

  7. Electricity market readiness plan : Ontario Energy Board

    International Nuclear Information System (INIS)

    2001-03-01

    This document informs electric power market participants of the Ontario Energy Board's newly developed market readiness plan and target timelines that local distribution companies (LDCs) must meet for retail marketing. The Ontario Energy Board's plan incorporates relevant independent market operator (IMO)-administered market milestones with retail market readiness targeted for September 2001. The market readiness framework involves a self-certification process for LDCs by August 10, 2001, through which the Board will be able to monitor progress and assess the feasibility of meeting the target timelines. For retail market readiness, all LDCs will have to calculate settlement costs, produce unbundled bills, provide standard supply service, change suppliers and accommodate retail transactions. LDCs must be either authorized participants in the IMO-administered market or become retail customers of their host LDC. Unbundled bills will include itemized charges for energy price, transmission, distribution and debt retirement charge. 1 tab., 1 fig

  8. 29 CFR 1915.181 - Electrical circuits and distribution boards.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Electrical circuits and distribution boards. 1915.181... Electrical Machinery § 1915.181 Electrical circuits and distribution boards. (a) The provisions of this... employee is permitted to work on an electrical circuit, except when the circuit must remain energized for...

  9. The Manitoba Hydro-Electric Board 50. annual report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This document presents the financial statements for The Manitoba Hydro-Electric Board (Manitoba Hydro) for the fiscal year ended March 31, 2001. Manitoba Hydro was proud to report no electricity rate increase for the period 2000-2001, a feat realized for the fifth consecutive year for most customer groups. Financial and production highlights were first presented, followed by the vision mission and goals of Manitoba Hydro. Manitoba Hydro serves 403 000 customers in the province with electric energy, and 248 000 customers with natural gas service mainly in the south of the province. Electricity export sale agreements are in place with more than 35 utilities and marketers in the United States, Ontario and Saskatchewan. Self-renewing waterpower is used to generate the bulk of the electricity. The transmission and distribution lines stretch over 100 000 kilometres. Manitoba Hydro is the fourth largest energy utility in Canada based on capital assets. A review of the year was presented, as well as a brief historical overview of Manitoba Hydro. The financial review section discussed the management report, the Auditor's report. Included in this section were various statement sheets, namely the consolidated statement of income and retained earnings, consolidated balance sheet, consolidated statement of cash flows, followed by some notes to the consolidated financial statements. Consolidated financial statistics and operating statistics - 10-year overview were presented. A brief presentation of the Board members and senior officers ended this report. tabs. figs.

  10. The Manitoba Hydro-Electric Board 50. annual report

    International Nuclear Information System (INIS)

    2001-01-01

    This document presents the financial statements for The Manitoba Hydro-Electric Board (Manitoba Hydro) for the fiscal year ended March 31, 2001. Manitoba Hydro was proud to report no electricity rate increase for the period 2000-2001, a feat realized for the fifth consecutive year for most customer groups. Financial and production highlights were first presented, followed by the vision mission and goals of Manitoba Hydro. Manitoba Hydro serves 403 000 customers in the province with electric energy, and 248 000 customers with natural gas service mainly in the south of the province. Electricity export sale agreements are in place with more than 35 utilities and marketers in the United States, Ontario and Saskatchewan. Self-renewing waterpower is used to generate the bulk of the electricity. The transmission and distribution lines stretch over 100 000 kilometres. Manitoba Hydro is the fourth largest energy utility in Canada based on capital assets. A review of the year was presented, as well as a brief historical overview of Manitoba Hydro. The financial review section discussed the management report, the Auditor's report. Included in this section were various statement sheets, namely the consolidated statement of income and retained earnings, consolidated balance sheet, consolidated statement of cash flows, followed by some notes to the consolidated financial statements. Consolidated financial statistics and operating statistics - 10-year overview were presented. A brief presentation of the Board members and senior officers ended this report. tabs. figs

  11. 78 FR 70275 - United States Travel and Tourism Advisory Board

    Science.gov (United States)

    2013-11-25

    ... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism... an opportunity to apply for membership on the United States Travel and Tourism Advisory Board... Travel and Tourism Advisory Board (Board). The purpose of the Board is to advise the Secretary of...

  12. Role of State Medical Boards in Continuing Medical Education

    Science.gov (United States)

    Johnson, David A.; Austin, Dale L.; Thompson, James N.

    2005-01-01

    The evaluation of physician competency prior to issuing an initial medical license has been a fundamental responsibility of medical boards. Growing public expectation holds that medical boards will ensure competency throughout a physician's career. The Federation of State Medical Boards (FSMB) strongly supports the right of state medical boards to…

  13. 78 FR 77103 - United States Travel and Tourism Advisory Board

    Science.gov (United States)

    2013-12-20

    ... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism... extended deadline for application for membership on the United States Travel and Tourism Advisory Board... Travel and Tourism Advisory Board (Board). The November 25, 2013 notice provided that all applications...

  14. States of Cybersecurity: Electricity Distribution System Discussions

    Energy Technology Data Exchange (ETDEWEB)

    Pena, Ivonne [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ingram, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Martin, Maurice [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-03-16

    State and local entities that oversee the reliable, affordable provision of electricity are faced with growing and evolving threats from cybersecurity risks to our nation's electricity distribution system. All-hazards system resilience is a shared responsibility among electric utilities and their regulators or policy-setting boards of directors. Cybersecurity presents new challenges and should be a focus for states, local governments, and Native American tribes that are developing energy-assurance plans to protect critical infrastructure. This research sought to investigate the implementation of governance and policy at the distribution utility level that facilitates cybersecurity preparedness to inform the U.S. Department of Energy (DOE), Office of Energy Policy and Systems Analysis; states; local governments; and other stakeholders on the challenges, gaps, and opportunities that may exist for future analysis. The need is urgent to identify the challenges and inconsistencies in how cybersecurity practices are being applied across the United States to inform the development of best practices, mitigations, and future research and development investments in securing the electricity infrastructure. By examining the current practices and applications of cybersecurity preparedness, this report seeks to identify the challenges and persistent gaps between policy and execution and reflect the underlying motivations of distinct utility structures as they play out at the local level. This study aims to create an initial baseline of cybersecurity preparedness within the distribution electricity sector. The focus of this study is on distribution utilities not bound by the cybersecurity guidelines of the North American Electric Reliability Corporation (NERC) to examine the range of mechanisms taken by state regulators, city councils that own municipal utilities, and boards of directors of rural cooperatives.

  15. Vehicle electrical system state controller

    Science.gov (United States)

    Bissontz, Jay E.

    2017-10-17

    A motor vehicle electrical power distribution system includes a plurality of distribution sub-systems, an electrical power storage sub-system and a plurality of switching devices for selective connection of elements of and loads on the power distribution system to the electrical power storage sub-system. A state transition initiator provides inputs to control system operation of switching devices to change the states of the power distribution system. The state transition initiator has a plurality of positions selection of which can initiate a state transition. The state transition initiator can emulate a four position rotary ignition switch. Fail safe power cutoff switches provide high voltage switching device protection.

  16. On board fuel processing for using in electric vehicles

    International Nuclear Information System (INIS)

    Paez, Daniel E.; Marquez, Marco A.

    1999-01-01

    The increase in vehicle population, the emission effects upon the environment, and the growing concern of industrialized nations to reduce oil dependency, are the arguments for the new developments that may change the automobile revolution within the next decades. However, the electricity to move the future vehicles must come from the processing of liquid fuels on board. Liquid fuels such as gasoline have the advantage of having good on-site system for distribution and supply directly to the vehicle and will compete for staying as the energy source of the future. What are the opportunities in R and D and how to take advantage of them are analyzed in this document. Liquid fuel processing technologies and fuel options are also described by PDVSA-INTEVEP

  17. Critical review of on-board capacity estimation techniques for lithium-ion batteries in electric and hybrid electric vehicles

    Science.gov (United States)

    Farmann, Alexander; Waag, Wladislaw; Marongiu, Andrea; Sauer, Dirk Uwe

    2015-05-01

    This work provides an overview of available methods and algorithms for on-board capacity estimation of lithium-ion batteries. An accurate state estimation for battery management systems in electric vehicles and hybrid electric vehicles is becoming more essential due to the increasing attention paid to safety and lifetime issues. Different approaches for the estimation of State-of-Charge, State-of-Health and State-of-Function are discussed and analyzed by many authors and researchers in the past. On-board estimation of capacity in large lithium-ion battery packs is definitely one of the most crucial challenges of battery monitoring in the aforementioned vehicles. This is mostly due to high dynamic operation and conditions far from those used in laboratory environments as well as the large variation in aging behavior of each cell in the battery pack. Accurate capacity estimation allows an accurate driving range prediction and accurate calculation of a battery's maximum energy storage capability in a vehicle. At the same time it acts as an indicator for battery State-of-Health and Remaining Useful Lifetime estimation.

  18. Wind energy research activities of the Dutch Electricity Generating Board

    International Nuclear Information System (INIS)

    Halberg, N.

    1990-01-01

    The varying degrees of penetration of wind energy conversion systems (WECs) into the Dutch electricity generating system has been examined. A simulation has been carried out using wind data recorded at 6 sites spread across the area of interest in the Netherlands. The recorded wind data has been used in conjunction with a production costing model normally used by Sep (the Dutch Electricity Generating Board) for planning purposes. This model was modified to give a correct assessment of the quantity and value of fuel savings made by WECs. System studies were carried out for the year 2000 for zero wind penetration and for three distinctive penetration degrees of WECs, namely 5%, 10% and 15%. After incorporation of the WECS capacity, adjustments were made to the basic plant mix to allow the capacity credit WECs. Separate production cost simulations were executed for each distinct WECS capacity factor. Economic assessments were carried out using standard procedures. Except for the unpredictable development of fuel prices, the capital costs of the WECs proved to be the determinant for the economic viability of wind power. Significant improvements in costs and performance, as may be achieved through additional technological advances, are needed to made wind power competitive in widespread utility applications. (Author)

  19. Manitoba Hydro-Electric Board 52. annual report : Building as one

    International Nuclear Information System (INIS)

    2003-01-01

    A provincial Crown corporation, Manitoba Hydro serves approximately 502,000 customers throughout Manitoba with electric energy, and provides natural gas service to 251,000 customers in several communities in southern Manitoba. In addition, Manitoba Hydro exports electricity to electric utilities and marketers in the mid-western United States, Ontario, and Saskatchewan. In 2002, Winnipeg Hydro was purchased from the City of Winnipeg. Records were broken for historical peak demand for electricity (24 February 2003) and natural gas (22 January 2003). A study of wind power generation was launched, with seven sites being monitored. A Power Smart program focusing on geothermal heat pump systems also offered assistance to Manitoba homeowners. Successful conversion of the Selkirk Generating Station from coal to natural gas was achieved. In Brandon, a 260 mega watt (MW) natural gas combustion turbine plant was opened. Over $29 million in loans were issued to customers under the Home Comfort and Energy Savings Program. Electricity rates for residential customers remained unchanged, as did those for large industrial customers. Approval was received by the National Energy Board to export 500 MW of electricity to Northern States Power. A new international interconnection was brought into service in November 2002 between Glenboro, Manitoba and Harvey, North Dakota. The ISO 14001 international certification for environmental management systems was awarded to Manitoba Hydro. tabs., figs

  20. School Social Workers Sanctioned by State Departments of Education and State Licensing Boards

    Science.gov (United States)

    Boland-Prom, Kim; Alvarez, Michelle E.

    2014-01-01

    This article presents the results of a study on the unprofessional conduct of school social workers who have been sanctioned by state regulatory boards (boards of education and licensing boards). The data represent information from 14 states and the District of Columbia. Results indicate that school social workers are rarely sanctioned at the…

  1. State electricity profiles, March 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Due to the role electricity plays in the Nation`s economic and social well-being, interested parties have been following the electric power industry`s transition by keeping abreast of the restructuring and deregulation events that are taking place almost daily. Much of the attention centers around the States and how they are restructuring the business of electricity supply within their respective jurisdictions. This report is designed to profile each State and the District of Columbia regarding not only their current restructuring activities, but also their electricity generation and concomitant statistics from 1986 through 1996. Included are data on a number of subject areas including generating capability, generation, revenues, fuel use, capacity factor for nuclear plants, retail sales, and pollutant emissions. Although the Energy Information Administration (EIA) publishes this type of information, there is a lack of a uniform overview for each individual State. This report is intended to help fill that gap and also to serve as a framework for more detailed studies. In addition to basic statistics in tables and graphs, a textual section is provided for each State, discussing some of the points relative to electricity production that are noteworthy in, or unique to, that particular State. Also, each State is ranked according to the place it holds, as compared to the rest of the states, in various relevant areas, such as its average price of electricity per kilowatthour, its population, and its emissions of certain atmospheric pollutants. The final chapter covers the Nation as a whole. 451 figs., 520 tabs.

  2. 77 FR 75148 - Request for Applications for United States Travel and Tourism Advisory Board

    Science.gov (United States)

    2012-12-19

    ... States Travel and Tourism Advisory Board AGENCY: International Trade Administration, Commerce. ACTION: Notice of an opportunity to apply for membership on the United States Travel and Tourism Advisory Board... States Travel and Tourism Advisory Board (Board). The purpose of the Board is to advise the Secretary of...

  3. Chattanooga Electric Power Board Case Study Distribution Automation

    Energy Technology Data Exchange (ETDEWEB)

    Glass, Jim [Chattanooga Electric Power Board (EPB), TN (United States); Melin, Alexander M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Starke, Michael R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ollis, Ben [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-10-01

    In 2009, the U.S. Department of Energy under the American Recovery and Reinvestment Act (ARRA) awarded a grant to the Chattanooga, Tennessee, Electric Power Board (EPB) as part of the Smart Grid Investment Grant Program. The grant had the objective “to accelerate the transformation of the nation’s electric grid by deploying smart grid technologies.” This funding award enabled EPB to expedite the original smart grid implementation schedule from an estimated 10-12 years to 2.5 years. With this funding, EPB invested heavily in distribution automation technologies including installing over 1,200 automated circuit switches and sensors on 171 circuits. For utilities considering a commitment to distribution automation, there are underlying questions such as the following: “What is the value?” and “What are the costs?” This case study attempts to answer these questions. The primary benefit of distribution automation is increased reliability or reduced power outage duration and frequency. Power outages directly impact customer economics by interfering with business functions. In the past, this economic driver has been difficult to effectively evaluate. However, as this case study demonstrates, tools and analysis techniques are now available. In this case study, the impact on customer costs associated with power outages before and after the implementation of distribution automation are compared. Two example evaluations are performed to demonstrate the benefits: 1) a savings baseline for customers under normal operations1 and 2) customer savings for a single severe weather event. Cost calculations for customer power outages are performed using the US Department of Energy (DOE) Interruption Cost Estimate (ICE) calculator2. This tool uses standard metrics associated with outages and the customers to calculate cost impact. The analysis shows that EPB customers have seen significant reliability improvements from the implementation of distribution automation. Under

  4. Evaluation of the use of on-board spacecraft energy storage for electric propulsion missions

    Science.gov (United States)

    Poeschel, R. L.; Palmer, F. M.

    1983-01-01

    On-board spacecraft energy storage represents an under utilized resource for some types of missions that also benefit from using relatively high specific impulse capability of electric propulsion. This resource can provide an appreciable fraction of the power required for operating the electric propulsion subsystem in some missions. The most probable mission requirement for utilization of this energy is that of geostationary satellites which have secondary batteries for operating at high power levels during eclipse. The study summarized in this report selected four examples of missions that could benefit from use of electric propulsion and on-board energy storage. Engineering analyses were performed to evaluate the mass saved and economic benefit expected when electric propulsion and on-board batteries perform some propulsion maneuvers that would conventionally be provided by chemical propulsion. For a given payload mass in geosynchronous orbit, use of electric propulsion in this manner typically provides a 10% reduction in spacecraft mass.

  5. 78 FR 11167 - Meetings: State Energy Advisory Board

    Science.gov (United States)

    2013-02-15

    ... Advisory Committee Act (Pub. L. 92- 463; 86 Stat. 770) requires that public notice of these meetings be... carry out the Board's responsibilities as designated in the State Energy Efficiency Programs Improvement... and Renewable Energy (EERE), discuss new initiatives and technologies generated by the EERE program...

  6. 77 FR 20015 - State Energy Advisory Board (STEAB)

    Science.gov (United States)

    2012-04-03

    ... (STEAB). The Federal Advisory Committee Act (Pub. L. 92- 463; 86 Stat. 770) requires that public notice... carry out the Board's responsibilities as designated in the State Energy Efficiency Programs Improvement... discuss new initiatives and technologies, and explore possible technology transfer programs, meet with...

  7. 76 FR 7623 - Department of State Performance Review Board Members

    Science.gov (United States)

    2011-02-10

    ...: February 2, 2011. Nancy J. Powell, Director General of the Foreign Service and Director of Human Resources... following individuals to the Department of State Performance Review Board for Non-Career Senior Executive Service members: Jeanne-Marie Smith, Chairperson, Senior Advisor, Deputy Secretary for Management and...

  8. The United States Board on Geographic Names: Standardization or regulation?

    Science.gov (United States)

    Payne, R.L.

    2000-01-01

    The United States Board on Geographic Names was created in 1890 to standardize the use of geographic names on federal maps and documents, and was established in its present form in 1947 by public law. The Board is responsible for geographic name usage and application throughout the federal government and its members must approve a name change or new name before it can be applied to federal maps and publications. To accomplish its mission, the Board has developed principles, policies, and procedures for use in the standardization process. The Board is also responsible legally for the promulgation of standardized names, whether or not these names have ever been controversial, and today this is accomplished by the universal availability of electronic databases for domestic and foreign names. This paper examines the development of Board policies and the implementation of these policies to achieve standardization with a view to relating these policies and activities to questions of standardization or regulation. ?? 2000 by The American Name Society.

  9. A SURVEY OF SMART ELECTRICAL BOARDS IN UBIQUITOUS SENSOR NETWORKS FOR GEOMATICS APPLICATIONS

    Directory of Open Access Journals (Sweden)

    S. M. R. Moosavi

    2015-12-01

    Full Text Available Nowadays more advanced sensor networks in various fields are developed. There are lots of online sensors spreading around the world. Sensor networks have been used in Geospatial Information Systems (GIS since sensor networks have expanded. Health monitoring, environmental monitoring, traffic monitoring, etc, are the examples of its applications in Geomatics. Sensor network is an infrastructure comprised of sensing (measuring, computing, and communication elements that gives an administrator the ability to instrument, observe, and react to events and phenomena in a specified environment. This paper describes about development boards which can be used in sensor networks and their applications in Geomatics and their role in wireless sensor networks and also a comparison between various types of boards. Boards that are discussed in this paper are Arduino, Raspberry Pi, Beagle board, Cubieboard. The Boards because of their great potential are also known as single board computers. This paper is organized in four phases: First, Reviewing on ubiquitous computing and sensor networks. Second, introducing of some electrical boards. Then, defining some criterions for comparison. Finally, comparing the Ubiquitous boards.

  10. 78 FR 31517 - Meeting of the United States Travel and Tourism Advisory Board

    Science.gov (United States)

    2013-05-24

    ... Tourism Advisory Board AGENCY: International Trade Administration, U.S. Department of Commerce. ACTION... the United States Travel and Tourism Advisory Board (Board). The Board will meet to discuss and... representatives of the U.S. government on the implementation of the National Travel and Tourism Strategy and the...

  11. 78 FR 53427 - Meeting of the United States Travel and Tourism Advisory Board

    Science.gov (United States)

    2013-08-29

    ... Tourism Advisory Board AGENCY: International Trade Administration, U.S. Department of Commerce. ACTION... the United States Travel and Tourism Advisory Board (Board). The Board advises the Secretary of Commerce on matters relating to the U.S. travel and tourism industry. DATES: September 17, 2013, 1:30 p.m...

  12. 77 FR 20009 - Meeting of the United States Travel and Tourism Advisory Board

    Science.gov (United States)

    2012-04-03

    ... Tourism Advisory Board AGENCY: International Trade Administration, U.S. Department of Commerce. ACTION... the United States Travel and Tourism Advisory Board (Board). The agenda may change to accommodate... and Tourism Advisory Board, Room 4043, 1401 Constitution Avenue NW., Washington, DC 20230, telephone...

  13. 78 FR 70274 - United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism...

    Science.gov (United States)

    2013-11-25

    ... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism Advisory Board AGENCY: International Trade... the schedule and agenda for an open meeting of the United States Travel and Tourism Advisory Board...

  14. 78 FR 3398 - United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism...

    Science.gov (United States)

    2013-01-16

    ... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism Advisory Board: Meeting of the United States Travel and Tourism Advisory Board AGENCY: International Trade... the schedule and agenda for an open meeting of the United States Travel and Tourism Advisory Board...

  15. Two-band tariff for domestic use: Italian Electricity Board rate structure

    International Nuclear Information System (INIS)

    Barteselli, R.

    1992-01-01

    ENEL (the Italian National Electricity Board) has begun to introduce a new rate structure for households: the 'two-band tariff'. This article is an effort to examine in principle how the new tariff could optimize load management when applied to the whole household sector

  16. Analysis of Electric Power Board of Chattanooga Smart Grid Investment

    Energy Technology Data Exchange (ETDEWEB)

    Starke, Michael [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ollis, Ben [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Glass, Jim [EPB Electric Power, Chattanooga, TN (United States); Melin, Alex [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Liu, Guodong [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sharma, Isha [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-06-01

    The deployment of a Smart Grid within the EPB electrical system has brought significant value to EPB customers and to EPB operations. The Smart Grid implementation has permitted the capability to automate many of the existing systems, increasing the overall efficiency and decreasing round trip time for many required operation functions. This has both reduced the cost of operations and increased the reliability of customer service. This boost in performance can be primarily linked to two main components: the communication network and the availability of data. The existence of a fiber communication backbone has opened numerous opportunities for EPB. Large data sets from remote devices can be continuously polled and used to compute numerous metrics. The speed of communication has provided a pathway to sophisticated distribution automation that would not otherwise be possible. The data have been shown to provide a much broader view of the actual electrical system that was not previously available, opening many new opportunities in data analytics. This report documents many of the existing systems and operational features of the EPB system. Many of these systems have seen significant improvement with the deployment of Smart Grid technologies. The research behind this report found that in some cases, the value was directly computable or estimable for these enhancements. Currently, several ongoing research topics are under investigation within EPB. Through a grant from TVA, EPB is currently installing a 1.3MW solar photovoltaic system, which will be the first-generation asset owned by EPB.

  17. 18 CFR 38.2 - Incorporation by reference of North American Energy Standards Board Wholesale Electric Quadrant...

    Science.gov (United States)

    2010-04-01

    ... reference of North American Energy Standards Board Wholesale Electric Quadrant standards. 38.2 Section 38.2 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY... UTILITIES § 38.2 Incorporation by reference of North American Energy Standards Board Wholesale Electric...

  18. Electric trade in the United States 1990

    International Nuclear Information System (INIS)

    1992-01-01

    Electric Trade in the United States 1990 (ELECTRA) is the third in a series of reports on wholesale power transactions prepared by the Electric Data Systems Branch, Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA). The electric trade data are published biennially. The first report presented 1986 data. The second report contained data for 1988. This report provides information on the industry during 1990

  19. 77 FR 56811 - United States Travel and Tourism Advisory Board; Meeting

    Science.gov (United States)

    2012-09-14

    ... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism... the United States Travel and Tourism Advisory Board (Board). The Board will meet to present updates on... implementation of the National Travel and Tourism Strategy and the progress on implementing the President's...

  20. 77 FR 38583 - Meeting of the United States Travel and Tourism Advisory Board

    Science.gov (United States)

    2012-06-28

    ... Tourism Advisory Board AGENCY: International Trade Administration, U.S. Department of Commerce. ACTION... the United States Travel and Tourism Advisory Board (Board). The agenda may change to [email protected] trade.gov . FOR FURTHER INFORMATION CONTACT: Jennifer Pilat, the United States Travel and Tourism...

  1. Research management at the Central Electricity Generating Board

    International Nuclear Information System (INIS)

    Broom, T.

    1986-01-01

    CEGB is responsible for power generation and transmission in England and Wales, and has a yearly production of some 230 TWh. There are three main fields of research: conventional generation and transmission, nuclear generation and environmental consequences of electricity generation. All laboratories carry out research in each field, though there are definite concentrations of specialities. The organisation of the research management changed emphasis in 1981 from an 'areal' (managing of individual institutes) to a topical approach (responsibilities for research fields). Good research requires good personnel, but also care on the part of the manager for the personal interests of the staff. There must be good cooperation between the researchers themselves, between researchers and managers, and between CEGB staff and researchers elsewhere. It is considered of prime importance that the researchers be true experts in their fields and that they maintain their scientific integrity. Other information is obtained by exchanging reports with comparable organisations, e.g. the KEMA in The Netherlands. Such an exchange requires mutual trust and research managers must therefore behave as true ambassadors. (Auth.)

  2. Predicting risk for disciplinary action by a state medical board.

    Science.gov (United States)

    Cardarelli, Roberto; Licciardone, John C; Ramirez, Gilbert

    2004-01-01

    Disciplinary actions taken against physicians in the United States have been increasing over the last decade, yet the factors that place physicians at risk have not been well identified. The objective of this study is to identify predictors of physician disciplinary action. This case-control study used data from the Texas State Board of Medical Examiners from January 1989 through December 1998. Characteristics of disciplined physicians and predictors of disciplinary action for all violations and by type of violation were the main outcome descriptors. Years in practice, black physicians, and osteopathic graduates were positive predictors for disciplinary action. In contrast, female physicians, international medical graduates, and Hispanic and Asian physicians were less likely to receive disciplinary action compared with male, US allopathic, and white physicians, respectively. Most specialists, except psychiatrists and obstetrician-gynecologists, were less likely to be disciplined than were family practitioners, whereas general practitioners were more likely to be disciplined. More studies are needed to corroborate these findings.

  3. Psychiatric boarding incidence, duration, and associated factors in United States emergency departments.

    Science.gov (United States)

    Nolan, Jason M; Fee, Christopher; Cooper, Bruce A; Rankin, Sally H; Blegen, Mary A

    2015-01-01

    Boarding, especially among psychiatric patients, has been characterized as a significant cause of ED crowding, but no quantitative analysis has described boarding nationally. This study determines the incidence, duration, and factors associated with ED boarding in the United States. 2008 National Hospital Ambulatory Medical Care Survey ED data were stratified by visit type (psychiatric vs. non-psychiatric), boarding status, and patient and hospital characteristics. Boarding was defined as a visit with an ED length of stay >6 hours, and boarding time as ED length of stay minus 6 hours. Pearson's chi-square tests describe hospital and patient characteristics stratified by boarding status. Multilevel multivariable logistic and linear regressions determine associations with boarding and boarding time. While 11% of all ED patients boarded, 21.5% of all psychiatric ED patients boarded. Boarding was also more prolonged for psychiatric ED patients. Controlling for confounders, odds of boarding for psychiatric patients were 4.78 (2.63-8.66) times higher than non-psychiatric, and psychiatric patients boarded 2.78 (1.91-3.64) hours longer than non-psychiatric. US EDs experienced high proportions and durations of boarding with psychiatric patients disproportionately affected. Additional research concerning mental health care services and legislation may be required to address ED psychiatric patient boarding. Copyright © 2015 Emergency Nurses Association. Published by Elsevier Inc. All rights reserved.

  4. Electric trade in the United States 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-08-01

    Wholesale trade in electricity plays an important role for the US electric utility industry. Wholesale, or bulk power, transactions allow electric utilities to reduce power costs, increase power supply options, and improve reliability. In 1994, the wholesale trade market totaled 1.9 trillion kilowatthours, about 66% of total sales to ultimate consumers. This publication, Electric Trade in the United States 1994 (ELECTRA), is the fifth in a series of reports on wholesale power transactions prepared by the Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA). The electric trade data are published biennially. The first report presented 1986 data, and this report provides information on the electric power industry during 1994.

  5. Electric trade in the United States 1994

    International Nuclear Information System (INIS)

    1998-08-01

    Wholesale trade in electricity plays an important role for the US electric utility industry. Wholesale, or bulk power, transactions allow electric utilities to reduce power costs, increase power supply options, and improve reliability. In 1994, the wholesale trade market totaled 1.9 trillion kilowatthours, about 66% of total sales to ultimate consumers. This publication, Electric Trade in the United States 1994 (ELECTRA), is the fifth in a series of reports on wholesale power transactions prepared by the Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA). The electric trade data are published biennially. The first report presented 1986 data, and this report provides information on the electric power industry during 1994

  6. High efficiency particulate air filter technology from 1980 to 1985 in the Central Electricity Generating Board

    International Nuclear Information System (INIS)

    Skledon, R.; Taylor, S.; Fern, C.; Stead, M.

    1986-01-01

    This paper examines at the Central Electricity Generating Board's methods of High Efficiency Particulate Air (1,700 m 3 /hr) filter testing from conception to the present day. The choice of the test and the early results are looked at followed by the development using new test equipment for checking ladderframe systems. The need for the drawing up of the Central Electricity Generating Board 743401 Standard for filter manufacture and its effect on full implementation is looked into. The advantages and disadvantages of our test procedures are reflected upon and the future developments in test methods and filters for use by the C.E.G.B. in their power stations are discussed. (author)

  7. 78 FR 53426 - United States Travel and Tourism Advisory Board Charter Renewal

    Science.gov (United States)

    2013-08-29

    ... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism... for the United States Travel and Tourism Advisory Board on August 19, 2013. DATES: The Charter for the United States Travel and Tourism Advisory Board was renewed on August 19, 2013. FOR FURTHER INFORMATION...

  8. Electric trade in the United States, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    Wholesale trade in electricity plays an important role for the US electric utility industry. Wholesale, or bulk power, transactions allow electric utilities to reduce power costs, increase power supply options, and improve reliability. In 1996, the wholesale trade market totaled 2.3 trillion kilowatthours, over 73% of total sales to ultimate consumers. This publication, Electric Trade in the United States 1996 (ELECTRA), is the sixth in a series of reports on wholesale power transactions prepared by the Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA). The electric trade data are published biennially. The first report presented 1986 data, and this report provides information on the electric power industry during 1996. The electric trade data collected and presented in this report furnish important information on the wholesale structure found within the US electric power industry. The patterns of interutility trade in the report support analyses of wholesale power transactions and provide input for a broader understanding of bulk power market issues that define the emerging national electric energy policies. The report includes information on the quantity of power purchased, sold, exchanged, and wheeled; the geographical locations of transactions and ownership classes involved; and the revenues and costs. 1 fig., 43 tabs.

  9. Magnetic compatibility of standard components for electrical installations: Computation of the background field and consequences on the design of the electrical distribution boards and control boards for the ITER Tokamak building

    International Nuclear Information System (INIS)

    Benfatto, I.; Bettini, P.; Cavinato, M.; Lorenzi, A. De; Hourtoule, J.; Serra, E.

    2005-01-01

    Inside the proposed Tokamak building, the ITER poloidal field magnet system would produce a stray magnetic field up to 70 mT. This is a very unusual environmental condition for electrical installation equipment and limited information is available on the magnetic compatibility of standard components for electrical distribution boards and control boards. Because this information is a necessary input for the design of the electrical installation inside the proposed ITER Tokamak building specific investigations have been carried out by the ITER European Participant Team. The paper reports on the computation of the background magnetic field map inside the ITER Tokamak building and the consequences on the design of the electrical installations of this building. The effects of the steel inside the building structure and the feasibility of magnetic shields for electrical distribution boards and control boards are also reported in the paper. The results of the test campaigns on the magnetic field compatibility of standard components for electrical distribution boards and control boards are reported in companion papers published in these proceedings

  10. Depollution benchmarks for capacitors, batteries and printed wiring boards from waste electrical and electronic equipment (WEEE)

    International Nuclear Information System (INIS)

    Savi, Daniel; Kasser, Ueli; Ott, Thomas

    2013-01-01

    Highlights: • We’ve analysed data on the dismantling of electronic and electrical appliances. • Ten years of mass balance data of more than recycling companies have been considered. • Percentages of dismantled batteries, capacitors and PWB have been studied. • Threshold values and benchmarks for batteries and capacitors have been identified. • No benchmark for the dismantling of printed wiring boards should be set. - Abstract: The article compiles and analyses sample data for toxic components removed from waste electronic and electrical equipment (WEEE) from more than 30 recycling companies in Switzerland over the past ten years. According to European and Swiss legislation, toxic components like batteries, capacitors and printed wiring boards have to be removed from WEEE. The control bodies of the Swiss take back schemes have been monitoring the activities of WEEE recyclers in Switzerland for about 15 years. All recyclers have to provide annual mass balance data for every year of operation. From this data, percentage shares of removed batteries and capacitors are calculated in relation to the amount of each respective WEEE category treated. A rationale is developed, why such an indicator should not be calculated for printed wiring boards. The distributions of these de-pollution indicators are analysed and their suitability for defining lower threshold values and benchmarks for the depollution of WEEE is discussed. Recommendations for benchmarks and threshold values for the removal of capacitors and batteries are given

  11. Depollution benchmarks for capacitors, batteries and printed wiring boards from waste electrical and electronic equipment (WEEE)

    Energy Technology Data Exchange (ETDEWEB)

    Savi, Daniel, E-mail: d.savi@umweltchemie.ch [Dipl. Environmental Sci. ETH, büro für umweltchemie, Zurich (Switzerland); Kasser, Ueli [Lic. Phil. Nat. (Chemist), büro für umweltchemie, Zurich (Switzerland); Ott, Thomas [Dipl. Phys. ETH, Institute of Applied Simulation, Zurich University of Applied Sciences, Wädenswil (Switzerland)

    2013-12-15

    Highlights: • We’ve analysed data on the dismantling of electronic and electrical appliances. • Ten years of mass balance data of more than recycling companies have been considered. • Percentages of dismantled batteries, capacitors and PWB have been studied. • Threshold values and benchmarks for batteries and capacitors have been identified. • No benchmark for the dismantling of printed wiring boards should be set. - Abstract: The article compiles and analyses sample data for toxic components removed from waste electronic and electrical equipment (WEEE) from more than 30 recycling companies in Switzerland over the past ten years. According to European and Swiss legislation, toxic components like batteries, capacitors and printed wiring boards have to be removed from WEEE. The control bodies of the Swiss take back schemes have been monitoring the activities of WEEE recyclers in Switzerland for about 15 years. All recyclers have to provide annual mass balance data for every year of operation. From this data, percentage shares of removed batteries and capacitors are calculated in relation to the amount of each respective WEEE category treated. A rationale is developed, why such an indicator should not be calculated for printed wiring boards. The distributions of these de-pollution indicators are analysed and their suitability for defining lower threshold values and benchmarks for the depollution of WEEE is discussed. Recommendations for benchmarks and threshold values for the removal of capacitors and batteries are given.

  12. Continuing education requirements among State Occupational Therapy Regulatory Boards in the United States of America

    Directory of Open Access Journals (Sweden)

    Savannah R. Hall

    2016-10-01

    Full Text Available Purpose The purpose of this study is to compare and contrast the contents of each state’s occupational therapy (OT regulatory board requirements regarding licensees’ acquisition of continuing education units in the United States of America. Methods Data related to continuing education requirements from each OT regulatory board of all 50 states and the District of Columbia in the United States were reviewed and categorized by two reviewers. Analysis was conducted based on the categorization of the continuing education requirements and activities required, allowed, and not allowed/not mentioned for continuing education units. Results Findings revealed non-uniformity and inconsistency of continuing education requirements for licensure renewal between OT regulatory boards and was coupled with lack of specific criteria for various continuing education activities. Continuing education requirements were not tailored to meet the needs of individual licensee’s current and anticipated professional role and job responsibilities, with a negative bias towards presentation and publication allowed for continuing education units. Few boards mandated continuing education topics on ethics related to OT practice within each renewal cycle. Conclusion OT regulatory boards should move towards unifying the reporting format of continuing education requirements across all states to reduce ambiguity and to ensure licensees are equipped to provide ethical and competent practice. Efforts could be made to enact continuing education requirements specific to the primary role of a particular licensee. Finally, assigning the amount of continuing education credits to be awarded for different activities should be based on research evidence rather than arbitrary determination.

  13. Supply and demand of board-certified emergency physicians by U.S. state, 2005.

    Science.gov (United States)

    Sullivan, Ashley F; Ginde, Adit A; Espinola, Janice A; Camargo, Carlos A

    2009-10-01

    The objective was to estimate the emergency medicine (EM) board-certified emergency physician (EP) workforce supply and demand by U.S. state. The 2005 National Emergency Department Inventories-USA provided annual visit volumes for U.S. emergency departments (EDs). We estimated full-time equivalent (FTE) EP demand at each ED by dividing the actual number of visits by the estimated average EP visit volume (3,548 visits/year) and then summing FTEs by state. Our model assumed that at least one EP should be present 24/7 in each ED. The number of EM board-certified EPs per state was provided by the American Board of Medical Specialties (American Board of Emergency Medicine, American Board of Pediatrics) and the American Osteopathic Board of Emergency Medicine. We used U.S. Census Bureau civilian population estimates to calculate EP population density by state. The supply of EM board-certified EPs was 58% of required FTEs to staff all EDs nationally and ranged from 10% in South Dakota to 104% in Hawai'i (i.e., there were more EPs than the estimated need). Texas and Florida had the largest absolute shortages of EM board-certified EPs (2,069 and 1,146, respectively). The number of EM board-certified EPs per 100,000 U.S. civilian population ranged from 3.6 in South Dakota to 13.8 in Washington, DC. States with a higher population density of EM board-certified EPs had higher percent high school graduates and a lower percent rural population and whites. The supply and demand of EM board-certified EPs varies by state. Only one state had an adequate supply of EM board-certified EPs to fully staff its EDs.

  14. 78 FR 52171 - State Energy Advisory Board (STEAB)

    Science.gov (United States)

    2013-08-22

    ... EERE with the Clean Energy Manufacturing Initiative and other proposed programs, provide an update to...; reasonable provision will be made to include requested topic(s) on the agenda. The Chair of the Board is...

  15. 78 FR 44943 - State Energy Advisory Board (STEAB)

    Science.gov (United States)

    2013-07-25

    ... to assist EERE with the Clean Energy Manufacturing Initiative and other proposed programs, provide an... be made to include requested topic(s) on the agenda. The Chair of the Board is empowered to conduct...

  16. 78 FR 77444 - State Energy Advisory Board (STEAB)

    Science.gov (United States)

    2013-12-23

    ... 2014 engagement plan between STEAB and EERE, review the five main focus areas for 2014 and report on... requested topic(s) on the agenda. The Chair of the Board is empowered to conduct the meeting in a fashion...

  17. Institutional Review Boards: Perspectives from the United States

    Directory of Open Access Journals (Sweden)

    Alvita Nathaniel, Ph.D., FNP-BC, FAANP

    2010-12-01

    Full Text Available In the U.S., all research must be approved by an Institutional Review Board (IRB that evaluates research protocols for the purpose of protecting human subjects. This paper includes a brief history of the development of public policy that guides institutional review boards in the U.S. and commentary on the responsibilities of a grounded theory researcher interested in applying for approval for a research study.An institutional review board (IRB is a formally constituted committee that approves and monitors biomedical and behavioural research with the purpose of protecting the rights and welfare of research participants. An IRB performs scientific, ethical, and regulatory oversight functions. In the U.S., it is common for grounded theorists to experience frustration with the IRB protocol submission process. Facets of the application process may seem rigid, redundant, and non-applicable. Review board members may not seem to understand or appreciate qualitative methods and delays are common. In addition, a conglomeration of disparate policies and procedures coupled with a variety of types of review boards creates a system that defies description. Nevertheless, a researcher who understands public policy and the responsibilities of institutional review boards can learn to develop research applications that are quickly approved.

  18. Adaptive approach for on-board impedance parameters and voltage estimation of lithium-ion batteries in electric vehicles

    Science.gov (United States)

    Farmann, Alexander; Waag, Wladislaw; Sauer, Dirk Uwe

    2015-12-01

    Robust algorithms using reduced order equivalent circuit model (ECM) for an accurate and reliable estimation of battery states in various applications become more popular. In this study, a novel adaptive, self-learning heuristic algorithm for on-board impedance parameters and voltage estimation of lithium-ion batteries (LIBs) in electric vehicles is introduced. The presented approach is verified using LIBs with different composition of chemistries (NMC/C, NMC/LTO, LFP/C) at different aging states. An impedance-based reduced order ECM incorporating ohmic resistance and a combination of a constant phase element and a resistance (so-called ZARC-element) is employed. Existing algorithms in vehicles are much more limited in the complexity of the ECMs. The algorithm is validated using seven day real vehicle data with high temperature variation including very low temperatures (from -20 °C to +30 °C) at different Depth-of-Discharges (DoDs). Two possibilities to approximate both ZARC-elements with finite number of RC-elements on-board are shown and the results of the voltage estimation are compared. Moreover, the current dependence of the charge-transfer resistance is considered by employing Butler-Volmer equation. Achieved results indicate that both models yield almost the same grade of accuracy.

  19. The American Board of Internal Medicine Maintenance of Certification Examination and State Medical Board Disciplinary Actions: a Population Cohort Study.

    Science.gov (United States)

    McDonald, Furman S; Duhigg, Lauren M; Arnold, Gerald K; Hafer, Ruth M; Lipner, Rebecca S

    2018-03-07

    Some have questioned whether successful performance in the American Board of Internal Medicine (ABIM) Maintenance of Certification (MOC) program is meaningful. The association of the ABIM Internal Medicine (IM) MOC examination with state medical board disciplinary actions is unknown. To assess risk of disciplinary actions among general internists who did and did not pass the MOC examination within 10 years of initial certification. Historical population cohort study. The population of internists certified in internal medicine, but not a subspecialty, from 1990 through 2003 (n = 47,971). ABIM IM MOC examination. General internal medicine in the USA. The primary outcome measure was time to disciplinary action assessed in association with whether the physician passed the ABIM IM MOC examination within 10 years of initial certification, adjusted for training, certification, demographic, and regulatory variables including state medical board Continuing Medical Education (CME) requirements. The risk for discipline among physicians who did not pass the IM MOC examination within the 10 year requirement window was more than double than that of those who did pass the examination (adjusted HR 2.09; 95% CI, 1.83 to 2.39). Disciplinary actions did not vary by state CME requirements (adjusted HR 1.02; 95% CI, 0.94 to 1.16), but declined with increasing MOC examination scores (Kendall's tau-b coefficient = - 0.98 for trend, p actions were less severe among those passing the IM MOC examination within the 10-year requirement window than among those who did not pass the examination. Passing a periodic assessment of medical knowledge is associated with decreased state medical board disciplinary actions, an important quality outcome of relevance to patients and the profession.

  20. 75 FR 65460 - Renewal of Department of Defense Federal Advisory Committee; United States Military Academy Board...

    Science.gov (United States)

    2010-10-25

    ... the United States Military Academy Board of Visitors (hereafter referred to as the ``Board''). FOR FURTHER INFORMATION CONTACT: Jim Freeman, Deputy Committee Management Officer for the Department of... on matters relating to the U.S. Military Academy, including the following: morale and discipline...

  1. Electric states and magnetic states in a Majorana field. (Part 1: electric states)

    International Nuclear Information System (INIS)

    Lochak, G.

    1987-01-01

    It is shown that the Mojarana condition, by which the Dirac equation is reduced to the so-called ''abbreviated'' equation, may be equivalently replaced in a gauge invariant way by the condition that the chiral invariant equals zero. This allows up to give a Lagrangian derivation of the Majorana field. Symmetry laws of this field, interacting with an electromagnetic field, are then investigated. The system is shown to be split (contrary to the Dirac field, but just as the monopole one) into two chiral components. The solution of the equation of such a chiral component is given in the case of a central electric field. It is shown that there are no bounds states but only ionized states which are a special superposition of positive and negative energy states. Finally the geometrical optics approximation is investigated and the Jacobi equation is solved for a chiral component in a central electric field. All the trajectories are hyperbolic but are not of the classical keplerian type. They are divided into two groups respectively corresponding to attractive and repulsive motions, whatever the particle charge may be [fr

  2. 78 FR 65980 - State Energy Advisory Board (STEAB)

    Science.gov (United States)

    2013-11-04

    ... Federal Register. DATES: Thursday, November 21, 2013, from 3:30 p.m. to 4:00 p.m. (Eastern Time). To... Energy Efficiency Programs Improvement Act of 1990 (Pub. L. 101-440). Tentative Agenda: Receive an update... the Board on routine business matters and EERE areas of interest, and work on agenda items and details...

  3. 75 FR 346 - State Energy Advisory Board (STEAB)

    Science.gov (United States)

    2010-01-05

    ... advancement, find ways to encourage energy efficiency market transformation, and update members on routine business matters affecting the Board. Public Participation: The meeting is open to the public. Written... empowered to conduct the meeting in a fashion that will facilitate the orderly conduct of business. Minutes...

  4. USING THE INFORMATION OF ON-BOARD DIAGNOSTIC SYSTEMS IN DETERMINING THE TECHNICAL STATE OF THE LOCOMOTIVE

    Directory of Open Access Journals (Sweden)

    B. Ye. Bodnar

    2008-12-01

    Full Text Available The issues of increase of efficiency of information processing by оn-board systems of diagnostics of locomotives are considered. The examples of information processing by the on-board system of diagnostics of electric locomotives DE1 are presented. The suggestions on improvement of systematization and processing of information by on-board systems of diagnostics are given.

  5. Energy management systems on board of electric vehicles, based on power electronics

    Energy Technology Data Exchange (ETDEWEB)

    Guidi, Giuseppe

    2009-03-15

    The core of any electric vehicle (EV) is the electric drive train, intended as the energy conversion chain from the energy tank (typically some kind of rechargeable battery) to the electric motor that converts the electrical energy into the mechanical energy needed for the vehicle motion. The need for on-board electrical energy storage is the factor that has so far prevented pure electric vehicles from conquering significant market share. In fact electrochemical batteries, which are currently the most suitable device for electrical energy storage, have serious limitations in terms of energy and/or power density, cost and safety. All those characteristics reflect in pure electric vehicles being outperformed by standard internal combustion engine (ICE) based vehicles in terms of driving range, time needed to refuel and purchase cost. Electric vehicles do have their distinctive advantages, being intrinsically much more efficient, operating at zero emissions at the pipe, and offering a higher degree of controllability that can potentially enhance driving safety. No wonder then, that electric energy storage technology has attracted considerable R&D investments, resulting in new traction battery packs that are getting closer and closer to the industrial targets. In this scenario of EV technology gaining momentum, power electronics engineers have to come up with newer solutions allowing for more efficient and more reliable utilization of the precious on-board energy that comes in a form that cannot be directly utilized by the motor. At present, most of the research in the area of power electronics for automotive is focused in volume and cost reduction techniques. The increase in power density is pursued by developing components that can be operated at higher temperature, thus relieving the requirements on cooling. In this thesis, the focus is on the development of alternative topologies for the power electronics converters that make use of some peculiarities of the energy

  6. On state estimation in electric drives

    International Nuclear Information System (INIS)

    Leon, A.E.; Solsona, J.A.

    2010-01-01

    This paper deals with state estimation in electric drives. On one hand a nonlinear observer is designed, whereas on the other hand the speed state is estimated by using the dirty derivative from the position measured. The dirty derivative is an approximate version of the perfect derivative which introduces an estimation error few times analyzed in drive applications. For this reason, our proposal in this work consists in illustrating several aspects on the performance of the dirty derivator in presence of both model uncertainties and noisy measurements. To this end, a case study is introduced. The case study considers rotor speed estimation in a permanent magnet stepper motor, by assuming that rotor position and electrical variables are measured. In addition, this paper presents comments about the connection between dirty derivators and observers, and advantages and disadvantages of both techniques are also remarked.

  7. Hall-effect based semi-fast AC on-board charging equipment for electric vehicles.

    Science.gov (United States)

    Milanés-Montero, María Isabel; Gallardo-Lozano, Javier; Romero-Cadaval, Enrique; González-Romera, Eva

    2011-01-01

    The expected increase in the penetration of electric vehicles (EV) and plug-in hybrid electric vehicles (PHEV) will produce unbalanced conditions, reactive power consumption and current harmonics drawn by the battery charging equipment, causing a great impact on the power quality of the future smart grid. A single-phase semi-fast electric vehicle battery charger is proposed in this paper. This ac on-board charging equipment can operate in grid-to-vehicle (G2V) mode, and also in vehicle-to-grid (V2G) mode, transferring the battery energy to the grid when the vehicle is parked. The charger is controlled with a Perfect Harmonic Cancellation (PHC) strategy, contributing to improve the grid power quality, since the current demanded or injected has no harmonic content and a high power factor. Hall-effect current and voltage transducers have been used in the sensor stage to carry out this control strategy. Experimental results with a laboratory prototype are presented.

  8. Deregulating electricity in the American states

    Science.gov (United States)

    Terbush, Thomas Lee

    This dissertation develops nine stylized facts that summarize the major consequences of deregulation and tests these against recent experience in the electric utility industry. The experience of the electric utility industry matches the predictions of the stylized facts, except in one instance: although real electricity prices fell between 1982 and 1999, real prices fell less in states that deregulated. This dissertation presents three possible explanations for this discrepancy. First, through dynamic efficiency, consumers may benefit in the long run through lower rates and better service in the electricity market, or deregulation may be a public good that benefits electricity consumers through economy-wide improvements in efficiency. Second, higher prices may be a long-run outcome as predicted by the theory of the second best. Or third, both regulators and utilities may use deregulation to generate new rents. Because the original rents from regulation had dissipated, new rents could be generated under deregulation by making consumers pay off the utilities and then creating more new rents through re-regulation of the industry. Close examination tends to support the first and third explanations, although the second-best explanation cannot yet be ruled out completely. Higher prices appear to be a transitional phenomenon, resulting from a short-term payoff from consumers to incumbent utilities that was required to move deregulation forward. This payoff occurs as residential and commercial consumers bear relatively higher rates over three to five years to compensate utilities for stranded costs, investments thought to be unrecoverable under full competition. All states are benefiting from deregulation, but states that are deregulating are benefiting less while stranded costs are being recovered. This dissertation also examines California electricity deregulation and finds that the experience in California conforms with to the stylized facts, and that certain structural

  9. Estimation of Operating Condition of Appliances Using Circuit Current Data on Electric Distribution Boards

    Science.gov (United States)

    Iwafune, Yumiko; Ogimoto, Kazuhiko; Yagita, Yoshie

    The Energy management systems (EMS) on demand sides are expected as a method to enhance the capability of supply and demand balancing of a power system under the anticipated penetration of renewable energy generation such as Photovoltaics (PV). Elucidation of energy consumption structure in a building is one of important elements for realization of EMS and contributes to the extraction of potential energy saving. In this paper, we propose the estimation method of operating condition of household appliances using circuit current data on an electric distribution board. Circuit current data are broken down by their shape using a self-organization map method and aggregated by appliance based on customers' information of appliance possessed. Proposed method is verified using residential energy consumption measurement survey data.

  10. Proton exchange membrane fuel cells for electrical power generation on-board commercial airplanes.

    Energy Technology Data Exchange (ETDEWEB)

    Curgus, Dita Brigitte; Munoz-Ramos, Karina (Sandia National Laboratories, Albuquerque, NM); Pratt, Joseph William; Akhil, Abbas Ali (Sandia National Laboratories, Albuquerque, NM); Klebanoff, Leonard E.; Schenkman, Benjamin L. (Sandia National Laboratories, Albuquerque, NM)

    2011-05-01

    Deployed on a commercial airplane, proton exchange membrane fuel cells may offer emissions reductions, thermal efficiency gains, and enable locating the power near the point of use. This work seeks to understand whether on-board fuel cell systems are technically feasible, and, if so, if they offer a performance advantage for the airplane as a whole. Through hardware analysis and thermodynamic and electrical simulation, we found that while adding a fuel cell system using today's technology for the PEM fuel cell and hydrogen storage is technically feasible, it will not likely give the airplane a performance benefit. However, when we re-did the analysis using DOE-target technology for the PEM fuel cell and hydrogen storage, we found that the fuel cell system would provide a performance benefit to the airplane (i.e., it can save the airplane some fuel), depending on the way it is configured.

  11. Proton Exchange Membrane Fuel Cells for Electrical Power Generation On-Board Commercial Airplanes

    Energy Technology Data Exchange (ETDEWEB)

    Pratt, Joesph W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Klebanoff, Leonard E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Munoz-Ramos, Karina [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Akhil, Abbas A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Curgus, Dita B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Schenkman, Benjamin L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2011-05-01

    Deployed on a commercial airplane, proton exchange membrane fuel cells may offer emissions reductions, thermal efficiency gains, and enable locating the power near the point of use. This work seeks to understand whether on-board fuel cell systems are technically feasible, and, if so, if they offer a performance advantage for the airplane as a whole. Through hardware analysis and thermodynamic and electrical simulation, we found that while adding a fuel cell system using today’s technology for the PEM fuel cell and hydrogen storage is technically feasible, it will not likely give the airplane a performance benefit. However, when we re-did the analysis using DOE-target technology for the PEM fuel cell and hydrogen storage, we found that the fuel cell system would provide a performance benefit to the airplane (i.e., it can save the airplane some fuel), depending on the way it is configured.

  12. Proton exchange membrane fuel cells for electrical power generation on-board commercial airplanes

    International Nuclear Information System (INIS)

    Pratt, Joseph W.; Klebanoff, Leonard E.; Munoz-Ramos, Karina; Akhil, Abbas A.; Curgus, Dita B.; Schenkman, Benjamin L.

    2013-01-01

    Highlights: ► We examine proton exchange membrane fuel cells on-board commercial airplanes. ► We model the added fuel cell system’s effect on overall airplane performance. ► It is feasible to implement an on-board fuel cell system with current technology. ► Systems that maximize waste heat recovery are the best performing. ► Current PEM and H 2 storage technology results in an airplane performance penalty. -- Abstract: Deployed on a commercial airplane, proton exchange membrane (PEM) fuel cells may offer emissions reductions, thermal efficiency gains, and enable locating the power near the point of use. This work seeks to understand whether on-board fuel cell systems are technically feasible, and, if so, if they could offer a performance advantage for the airplane when using today’s off-the-shelf technology. We also examine the effects of the fuel cell system on airplane performance with (1) different electrical loads, (2) different locations on the airplane, and (3) expected advances in fuel cell and hydrogen storage technologies. Through hardware analysis and thermodynamic simulation, we found that an additional fuel cell system on a commercial airplane is technically feasible using current technology. Although applied to a Boeing 787-type airplane, the method presented is applicable to other airframes as well. Recovery and on-board use of the heat and water that is generated by the fuel cell is an important method to increase the benefit of such a system. The best performance is achieved when the fuel cell is coupled to a load that utilizes the full output of the fuel cell for the entire flight. The effects of location are small and location may be better determined by other considerations such as safety and modularity. Although the PEM fuel cell generates power more efficiently than the gas turbine generators currently used, when considering the effect of the fuel cell system on the airplane’s overall performance we found that an overall

  13. Psychiatric Boarding in Washington State and the Inadequacy of Mental Health Resources.

    Science.gov (United States)

    Bloom, Joseph D

    2015-06-01

    Psychiatric boarding is a term derived from emergency medicine that describes the holding of patients deemed in need of hospitalization in emergency departments for extended periods because psychiatric beds are not available. Such boarding has occurred for many years in the shadows of mental health care as both inpatient beds and community services have decreased. This article focuses on a 2014 Washington State Supreme Court decision that examined the interpretation of certain sections of the Washington state civil commitment statute that had been used to justify the extended boarding of detained psychiatric patients in general hospital emergency departments. The impact of this decision on the state of Washington should be significant and could spark a national debate about the negative impacts of psychiatric boarding on patients and on the nation's general hospital emergency services. © 2015 American Academy of Psychiatry and the Law.

  14. Characterization of electrical appliances in transient state

    Science.gov (United States)

    Wójcik, Augustyn; Winiecki, Wiesław

    2017-08-01

    The article contains the study about electrical appliance characterization on the basis of power grid signals. To represent devices, parameters of current and voltage signals recorded during transient states are used. In this paper only transients occurring as a result of switching on devices are considered. The way of data acquisition performed in specialized measurement setup developed for electricity load monitoring is described. The paper presents the method of transients detection and the method of appliance parameters calculation. Using the set of acquired measurement data and appropriate software the set of parameters for several household appliances operating in different operating conditions was processed. Usefulness of appliances characterization in Non-Intrusive Appliance Load Monitoring System (NIALMS) with the use of proposed method is discussed focusing on obtained results.

  15. Information Management System for the California State Water Resources Control Board (SWRCB)

    Science.gov (United States)

    Heald, T. C.; Redmann, G. H.

    1973-01-01

    A study was made to establish the requirements for an integrated state-wide information management system for water quality control and water quality rights for the State of California. The data sources and end requirements were analyzed for the data collected and used by the numerous agencies, both State and Federal, as well as the nine Regional Boards under the jurisdiction of the State Board. The report details the data interfaces and outlines the system design. A program plan and statement of work for implementation of the project is included.

  16. Orthopedic board certification and physician performance: an analysis of medical malpractice, hospital disciplinary action, and state medical board disciplinary action rates.

    Science.gov (United States)

    Kocher, Mininder S; Dichtel, Laura; Kasser, James R; Gebhardt, Mark C; Katz, Jeffery N

    2008-02-01

    Specialty board certification status has become the de facto standard of competency by which the profession and the public recognize physician specialists. However, the relationship between orthopedic board certification and physician performance has not been established. Rates of medical malpractice claims, hospital disciplinary actions, and state medical board disciplinary actions were compared between 1309 board-certified (BC) and 154 non-board-certified (NBC) orthopedic surgeons in 3 states. There was no significant difference between BC and NBC surgeons in medical malpractice claim proportions (BC, 19.1% NBC, 16.9% P = .586) or in hospital disciplinary action proportions (BC, 0.9% NBC, 0.8% P = 1.000). There was a significantly higher proportion of state medical board disciplinary action for NBC surgeons (BC, 7.6% NBC, 13.0% P = .028). An association between board certification status and physician performance is necessary to validate its status as the de facto standard of competency. In this study, BC surgeons had lower rates of state medical board disciplinary action.

  17. 77 FR 70875 - Department of State Performance Review Board Members

    Science.gov (United States)

    2012-11-27

    ..., Department of State; Kevin P. O'Keefe, Director, Office of Plans, Policy, and Analysis, Bureau of Political...-Greenfield, Director General of the Foreign Service and Director of Human Resources, Department of State. [FR...

  18. 20 CFR 661.205 - What is the role of the State Board?

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What is the role of the State Board? 661.205 Section 661.205 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR STATEWIDE... the Governor in the: (a) Development of the State Plan; (b) Development and continuous improvement of...

  19. Designing on-Board Data Handling for EDF (Electric Ducted Fan) Rocket

    Science.gov (United States)

    Mulyana, A.; Faiz, L. A. A.

    2018-02-01

    The EDF (Electric Ducted Fan) rocket to launch requires a system of monitoring, tracking and controlling to allow the rocket to glide properly. One of the important components in the rocket is OBDH (On-Board Data Handling) which serves as a medium to perform commands and data processing. However, TTC (Telemetry, Tracking, and Command) are required to communicate between GCS (Ground Control Station) and OBDH on EDF rockets. So the design control system of EDF rockets and GCS for telemetry and telecommand needs to be made. In the design of integrated OBDH controller uses a lot of electronics modules, to know the behavior of rocket used IMU sensor (Inertial Measurement Unit) in which consist of 3-axis gyroscope sensor and Accelerometer 3-axis. To do tracking using GPS, compass sensor as a determinant of the direction of the rocket as well as a reference point on the z-axis of gyroscope sensor processing and used barometer sensors to measure the height of the rocket at the time of glide. The data can be known in real-time by sending data through radio modules at 2.4 GHz frequency using XBee-Pro S2B to GCS. By using windows filter, noises can be reduced, and it used to guarantee monitoring and controlling system can work properly.

  20. NDT developments in the CEGB [Central Electricity Generating Board] for turbine and generator rotor shafts

    International Nuclear Information System (INIS)

    Denby, D.

    1990-01-01

    In common with many utilities world-wide, the Central Electricity Generating Board (CEGB) has suffered problems of cracking in turbine and generator rotors, in a wide range of Units. The type of cracking that has stimulated most NDT development work is transverse cracking initiating at the outside of shafts, though axial cracking at turbine disc keyways has also required considerable effort. This paper describes current and recent developments of NDT techniques and equipment designed to provide early warning and assessment of service-induced cracks which could propagate to failure. The following developments are included: in-situ inspection of LP turbine rotor shafts by means of low-angle ultrasonic beams fired along the length of the shaft; techniques for detecting and measuring cracking in shrunk-on turbine disc keyways; a remote, in-situ technique for cracking initiating in the pole teeth of large generator rotors, aimed at detecting cracks while they are small enough for the rotor to be repaired; an in-situ technique for rapidly inspecting these same generator rotors for the presence of larger cracks, by an ultrasonic beam fired along the length of the shaft; ultrasonic in-situ inspection of generator rotor teeth directly under the shrunk-on end (retaining) rings

  1. 77 FR 55201 - State Energy Advisory Board (STEAB); Meeting

    Science.gov (United States)

    2012-09-07

    .... L. 92- 463; 86 Stat.770) requires that public notice of these meetings be announced in the Federal... responsibilities as designated in the State Energy Efficiency Programs Improvement Act of 1990 (Pub. L. 101-440... partnerships, new initiatives and technologies being created at the Laboratory, explore possible technology...

  2. 76 FR 75876 - State Energy Advisory Board (STEAB)

    Science.gov (United States)

    2011-12-05

    ... Federal Advisory Committee Act (Pub. L. 92- 463; 86 Stat. 770) requires that public notice of these... responsibilities as designated in the State Energy Efficiency Programs Improvement Act of 1990 (Pub. L. 101-440... Forces, meet with key members of DOE and the Office of EERE to discuss new initiatives and technologies...

  3. Unprofessional behavior in medical school is associated with subsequent disciplinary action by a state medical board.

    Science.gov (United States)

    Papadakis, Maxine A; Hodgson, Carol S; Teherani, Arianne; Kohatsu, Neal D

    2004-03-01

    To determine if medical students who demonstrate unprofessional behavior in medical school are more likely to have subsequent state board disciplinary action. A case-control study was conducted of all University of California, San Francisco, School of Medicine graduates disciplined by the Medical Board of California from 1990-2000 (68). Control graduates (196) were matched by medical school graduation year and specialty choice. Predictor variables were male gender, undergraduate grade point average, Medical College Admission Test scores, medical school grades, National Board of Medical Examiner Part 1 scores, and negative excerpts describing unprofessional behavior from course evaluation forms, dean's letter of recommendation for residencies, and administrative correspondence. Negative excerpts were scored for severity (Good/Trace versus Concern/Problem/Extreme). The outcome variable was state board disciplinary action. The alumni graduated between 1943 and 1989. Ninety-five percent of the disciplinary actions were for deficiencies in professionalism. The prevalence of Concern/Problem/Extreme excerpts in the cases was 38% and 19% in controls. Logistic regression analysis showed that disciplined physicians were more likely to have Concern/Problem/Extreme excerpts in their medical school file (odds ratio, 2.15; 95% confidence interval, 1.15-4.02; p =.02). The remaining variables were not associated with disciplinary action. Problematic behavior in medical school is associated with subsequent disciplinary action by a state medical board. Professionalism is an essential competency that must be demonstrated for a student to graduate from medical school.

  4. An Introduction to Retail Electricity Choice in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Shengru [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-10-04

    Retail electricity choice in the United States allows end-use customers (including industrial, commercial, and residential customers) to buy electricity from competitive retail suppliers. This brochure offers an overview of retail electricity choice in the United States, and its impact on prices and renewable energy procurement. It concludes with three lessons learned from the U.S. retail market experience that may serve as a reference for other countries and regions taking steps towards retail electricity market liberalization.

  5. The risk of disciplinary action by state medical boards against physicians prescribing opioids.

    Science.gov (United States)

    Richard, Jack; Reidenberg, Marcus M

    2005-02-01

    Concern of physicians about being disciplined for prescribing opioids for patients in pain is one cause for undertreatment of pain. This study was done to assess the actual risk of being disciplined by state medical boards. A review of records of actions by the New York State Board for Professional Medical Misconduct for 3 years and of all medical boards in the United States for 9 months was done to determine this risk. New York State, with 7.8% of U.S. physicians, had 10 physicians disciplined annually related to overprescribing opioids, while the total for the entire U.S. was 120 physicians annually. Most physicians disciplined had multiple violations in addition to overprescribing controlled substances. In the national sample, 43% were prescribing for themselves or for nonpatients, 12% prescribed for addicts without addressing the patients' problems of addiction, 42% had inadequate records, 19% prescribed without indication for opioids, 13% were incompetent in additional ways, and 8% were having sexual activity with patients. Not a single physician, for whom information was available, was disciplined solely for overprescribing opioids. The actual risk of an American physician being disciplined by a state medical board for treating a real patient with opioids for a painful medical condition is virtually nonexistent.

  6. United States electric industry : restructuring in review

    International Nuclear Information System (INIS)

    Slocum Hollis, S.

    2004-01-01

    This paper provides a detailed review of the United States electric power industry. The aim of the review was to clarify and better define current industry procedures and practices in light of significant and recent restructuring. In addition, recent bankruptcies and the power blackout in 2003 have raised concerns over industry practices. Issues concerning Independent System Operators (ISO) and regional transmission organizations were evaluated, with reference to an evolution and implementation of Regional Transmission Organization (RTO) policy, including a cost-benefit analysis. A background of RTO formations was provided with reference to consolidation, selection process and transfer of assets. Standard market design, network access and pricing issues were reviewed, as well as market and reliability concerns. Issues concerning affiliate treatment, shortages and the effect of sale of securities were presented. Various approaches to congestion management were examined, with examples from California and New England. Market monitoring issues, investigations and hearings were also examined, with examples and orders, including details of refunds. Measures to improve reliability were reviewed, including: management systems, benefit margins, requirements, assurance agreements and reserve markets. Issues concerning information access were presented, including: Open Access Same-time Information System (OASIS) requirements; tagging; standard business practices and protocols; and quarterly report practices and protocols. Interconnection policies were reviewed with reference to applicability, service options and pricing. The issue of variations was examined, with case examples concerning cost allocation, contract rights and treatment of specific costs. Jurisdiction issues concerning corporate realignments and power exchanges were presented, as well as specific services and state-federal relations. Issues concerning mergers and merger policy were also discussed, with reference

  7. An exploratory study of boarding home sanctions and compliance in Washington State.

    Science.gov (United States)

    Graf Schaffner, Mindy L

    2011-01-01

    States vary in enforcement systems that monitor the quality of care in residential boarding homes. The growing number of people seeking long-term care services in boarding homes requires regulatory systems that are effective in quality assurance enforcement. This 6 year retrospective study describes the characteristics of 601 sanctioned and nonsanctioned homes in the state of Washington and evaluates the effectiveness of enforcement actions such as intermediate sanctions on future boarding home compliance. The intermediate sanctions evaluated are stop placement of admissions, civil fines, and conditions placed on licenses. Boarding homes that were sanctioned tended to be homes that were for-profit and had governmental contracts for Medicaid services. Homes that remained sanctioned throughout the 6 year study tended to be homes that were individual ownership corporations, had smaller numbers of licensed beds, and did not provide nursing services. Intermediate sanctions were found to vary in effectiveness. Conditions placed on licenses were the most effective intermediate sanction, and civil fines the least effective. Higher citation numbers and the most severe level of complaint types were found to be predictors of becoming a sanctioned boarding home. Copyright © 2011 Elsevier Inc. All rights reserved.

  8. Electric trade in the United States 1992

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    This publication, Electric Trade in the US 1992 (ELECTRA), is the fourth in a series of reports on wholesale power transactions prepared by the Electric Data Systems Branch, Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA). The electric trade data are published biennially. The first report presented 1986 data, and this report provides information on the electric power industry during 1992. The electric trade data collected and presented in this report furnish important information on the wholesale structure found within the US electric power industry. The patterns of interutility trade in the report support analyses of wholesale power transactions and provide input for a broader understanding of bulk power market issues that define the emerging national electric energy policies. The report includes information on the quantity of power purchased, sold, exchanged, and wheeled; the geographical locations of transactions and ownership classes involved; and the revenues and costs. Information on the physical transmission system are being included for the first time in this publication. Transmission data covering investor-owned electric utilities were shifted from the Financial Statistics of Selected Investor-Owned Electric Utilities to the ELECTRA publication. Some of the prominent features of this year`s report include information and data not published before on transmission lines for publicly owned utilities and transmission lines added during 1992 by investor-owned electric utilities.

  9. Electric trade in the United States 1992

    International Nuclear Information System (INIS)

    1994-09-01

    This publication, Electric Trade in the US 1992 (ELECTRA), is the fourth in a series of reports on wholesale power transactions prepared by the Electric Data Systems Branch, Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA). The electric trade data are published biennially. The first report presented 1986 data, and this report provides information on the electric power industry during 1992. The electric trade data collected and presented in this report furnish important information on the wholesale structure found within the US electric power industry. The patterns of interutility trade in the report support analyses of wholesale power transactions and provide input for a broader understanding of bulk power market issues that define the emerging national electric energy policies. The report includes information on the quantity of power purchased, sold, exchanged, and wheeled; the geographical locations of transactions and ownership classes involved; and the revenues and costs. Information on the physical transmission system are being included for the first time in this publication. Transmission data covering investor-owned electric utilities were shifted from the Financial Statistics of Selected Investor-Owned Electric Utilities to the ELECTRA publication. Some of the prominent features of this year's report include information and data not published before on transmission lines for publicly owned utilities and transmission lines added during 1992 by investor-owned electric utilities

  10. Disassembly and physical separation of electric/electronic components layered in printed circuit boards (PCB).

    Science.gov (United States)

    Lee, Jaeryeong; Kim, Youngjin; Lee, Jae-chun

    2012-11-30

    Although printed circuit boards (PCBs) contain various elements, only the major elements (i.e., those with content levels in wt% or over grade) of and precious metals (e.g., Ag, Au, and platinum groups) contained within PCBs can be recycled. To recover other elements from PCBs, the PCBs should be properly disassembled as the first step of the recycling process. The recovery of these other elements would be beneficial for efforts to conserve scarce resources, reuse electric/electronic components (EECs), and eliminate environmental problems. This paper examines the disassembly of EECs from wasted PCBs (WPCBs) and the physical separation of these EECs using a self-designed disassembling apparatus and a 3-step separation process of sieving, magnetic separation, and dense medium separation. The disassembling efficiencies were evaluated by using the ratio of grinding area (E(area)) and the weight ratio of the detached EECs (E(weight)). In the disassembly treatment, these efficiencies were improved with an increase of grinder speed and grinder height. 97.7% (E(area)) and 98% (E(weight)) could be accomplished ultimately by 3 repetitive treatments at a grinder speed of 5500 rpm and a grinder height of 1.5mm. Through a series of physical separations, most groups of the EECs (except for the diode, transistor, and IC chip groups) could be sorted at a relatively high separation efficiency of about 75% or more. To evaluate the separation efficiency with regard to the elemental composition, the distribution ratio (R(dis)) and the concentration ratio (R(conc)) were used. 15 elements could be separated with the highest R(dis) and R(conc) in the same separated division. This result implies that the recyclability of the elements is highly feasible, even though the initial content in EECs is lower than several tens of mg/kg. Copyright © 2012 Elsevier B.V. All rights reserved.

  11. 78 FR 65977 - Board of Visitors, United States Military Academy (USMA)

    Science.gov (United States)

    2013-11-04

    [email protected]us.army.mil . 7. Due to the lapse of appropriations, the Department of Defense cancelled the... DEPARTMENT OF DEFENSE Department of the Army Board of Visitors, United States Military Academy... the Sunshine Act of 1976 (5 U.S.C. 552b, as amended), and 41 CFR 102-3.150, the Department of Defense...

  12. 78 FR 63394 - Approval and Promulgation of Implementation Plans; Idaho: State Board Requirements

    Science.gov (United States)

    2013-10-24

    ... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 52 [EPA-R10-OAR-2013-0548, FRL-9901-76-Region 10] Approval and Promulgation of Implementation Plans; Idaho: State Board Requirements AGENCY: Environmental..., dated June 26, 2013, and Idaho Code Sec. Sec. 59-701 through 705, Ethics in Government Act, and...

  13. 75 FR 69910 - Revisions to the California State Implementation Plan, California Air Resources Board-Consumer...

    Science.gov (United States)

    2010-11-16

    ...'s national Consumer Products rule. The TSD has more information on our evaluation. C. Public Comment... the California State Implementation Plan, California Air Resources Board--Consumer Products AGENCY... revisions concern volatile organic compound (VOC) emissions from consumer products. We are approving a local...

  14. 76 FR 62004 - Revisions to the California State Implementation Plan, California Air Resources Board-Consumer...

    Science.gov (United States)

    2011-10-06

    ... Organic Compound Emission Standards for Consumer Products. B. Does the rule meet the evaluation criteria... the California State Implementation Plan, California Air Resources Board--Consumer Products AGENCY... revisions concern volatile organic compound (VOC) emissions from consumer products. We are approving a local...

  15. 75 FR 30301 - Jurisdictional Separations and Referral to the Federal-State Joint Board

    Science.gov (United States)

    2010-06-01

    ... FEDERAL COMMUNICATIONS COMMISSION 47 CFR Part 36 [CC Docket No. 80-286; FCC 10-89] Jurisdictional Separations and Referral to the Federal-State Joint Board AGENCY: Federal Communications Commission. ACTION... relationships and jurisdictional cost allocation factors used in jurisdictional separations. Extending the...

  16. 76 FR 30840 - Jurisdictional Separations and Referral to the Federal-State Joint Board

    Science.gov (United States)

    2011-05-27

    ... FEDERAL COMMUNICATIONS COMMISSION 47 CFR Part 36 [CC Docket No. 80-286; FCC 11-71] Jurisdictional Separations and Referral to the Federal-State Joint Board AGENCY: Federal Communications Commission. ACTION... this document, the Commission extends the current freeze of part 36 category relationships and...

  17. 77 FR 30410 - Jurisdictional Separations and Referral to the Federal-State Joint Board

    Science.gov (United States)

    2012-05-23

    ... FEDERAL COMMUNICATIONS COMMISSION 47 CFR Part 36 [CC Docket No. 80-286; FCC 12-49] Jurisdictional Separations and Referral to the Federal-State Joint Board AGENCY: Federal Communications Commission. ACTION... this document, the Commission extends the current freeze of part 36 category relationships and...

  18. A COMPARATIVE STUDY OF STATE LICENSING BOARDS FOR SCHOOL ADMINISTRATION AND OTHER SELECTED PROFESSIONS.

    Science.gov (United States)

    MOLINARI, RALPH G.; AND OTHERS

    COMPARISON OF THE COMPOSITION, CHARACTERISTICS, AND CURRENT LICENSING PRACTICES OF STATE LICENSING BOARDS FOR EDUCATIONAL ADMINISTRATION WITH LICENSING PROGRAMS FOR SEVEN OTHER PROFESSIONS, (ACCOUNTANCY, ARCHITECTURE, DENTISTRY, ENGINEERING, LAW, MEDICINE, AND NURSING) WAS THE PURPOSE OF THIS NATIONWIDE STUDY. THE RESEARCH PROCEDURES WERE DIVIDED…

  19. Results from a National Study of Social Workers Sanctioned by State Licensing Boards

    Science.gov (United States)

    Boland-Prom, Kim W.

    2009-01-01

    This article presents the results of a descriptive study, synthesizing the reports of 27 state regulatory boards about their actions against certified and licensed social workers (N = 874) during the period of 1999 to 2004. The purpose of this study was to examine the unprofessional behavior of certified and licensed social workers, the results of…

  20. Green electricity policies in the United States: case study

    International Nuclear Information System (INIS)

    Menz, Fredric C.

    2005-01-01

    While there has been interest in promoting the use of renewable energy in electricity production for a number of years in the United States, the market share of non-hydro renewable energy sources in electricity production has remained at about 2 percent over the past decade. The paper reviews the principal energy resources used for electricity production, considers the changing regulatory environment for the electricity industry, and describes government policies that have been used to promote green electricity in the United States, with an emphasis on measures adopted by state governments. Factors influencing the development of green power markets are also discussed, including underlying economic issues, public policy measures, the regulatory environment, external costs, and subsidies. Without significant increases in fossil fuel prices, much more stringent environmental regulations, or significant changes in electricity customer preferences, green electricity markets are likely to develop slowly in the United States

  1. Competitive Electricity Market Regulation in the United States: A Primer

    Energy Technology Data Exchange (ETDEWEB)

    Flores-Espino, Francisco [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tian, Tian [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chernyakhovskiy, Ilya [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chernyakhovskiy, Ilya [National Renewable Energy Lab. (NREL), Golden, CO (United States); Miller, Mackay [National Grid, Warwick (United Kingdom)

    2016-12-01

    The electricity system in the United States is a complex mechanism where different technologies, jurisdictions and regulatory designs interact. Today, two major models for electricity commercialization operate in the United States. One is the regulated monopoly model, in which vertically integrated electricity providers are regulated by state commissions. The other is the competitive model, in which power producers can openly access transmission infrastructure and participate in wholesale electricity markets. This paper describes the origins, evolution, and current status of the regulations that enable competitive markets in the United States.

  2. 12 CFR 987.2 - Law governing rights and obligations of Banks, Finance Board, Office of Finance, United States...

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Law governing rights and obligations of Banks, Finance Board, Office of Finance, United States and Federal Reserve Banks; rights of any Person against Banks, Finance Board, Office of Finance, United States and Federal Reserve Banks. 987.2 Section 987.2 Banks and Banking FEDERAL HOUSING FINANCE...

  3. 20 CFR 661.290 - Under what circumstances may States require Local Boards to take part in regional planning...

    Science.gov (United States)

    2010-04-01

    ... what circumstances may States require Local Boards to take part in regional planning activities? (a... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Under what circumstances may States require Local Boards to take part in regional planning activities? 661.290 Section 661.290 Employees' Benefits...

  4. 75 FR 65461 - Renewal of Department of Defense Federal Advisory Committee; United States Naval Academy Board of...

    Science.gov (United States)

    2010-10-25

    ... the United States Naval Academy Board of Visitors (hereafter referred to as the ``Board''). FOR FURTHER INFORMATION CONTACT: Jim Freeman, Deputy Committee Management Officer for the Department of... equipment, fiscal affairs, academic methods and other matters relating to the United States Naval Academy...

  5. Variations by state in physician disciplinary actions by US medical licensure boards.

    Science.gov (United States)

    Harris, John Alexander; Byhoff, Elena

    2017-03-01

    To investigate the variation in the rate of state medical board physician disciplinary actions between US states. Longitudinal study of state medical board physician disciplinary action rates using the US National Practitioner Data Bank and American Medical Association estimates of physician demographics across all 50 states and the District of Columbia from 2010 to 2014. Results were reliability adjusted using a multilevel logistic model controlling for year of disciplinary action, physicians per capita in each state and the rate of malpractice claims per physician in each state. From 2010 to 2014, there were a total of 5046 506 physician licensure years present. Medical boards reported a total of 21 647 disciplinary actions, of which 5137 (23.7%) were major disciplinary actions involving revocation, suspension or surrender of licence. The mean, reliability-adjusted rate of all disciplinary actions was 3.76 (95% CI 3.21 to 4.42) with a significant variation between states. State rates ranged from 2.13 (95% CI 1.86 to 2.45) to 7.93 (95% CI 6.33 to 9.93) actions per 1000 physicians. The mean rate of major disciplinary actions was 2.71 (95% CI 1.93 to 3.82), ranging from 0.64 (95% CI 0.53 to 0.76) to 2.71 (95% CI 1.93 to 3.82) actions per 1000 physicians. The correlation between the rate of major disciplinary action and minor disciplinary actions was 0.34. There is a significant, fourfold variation in the annual rate of medical board physician disciplinary action by state in the USA. When indicated, state medical boards should consider policies aimed at improving standardisation and coordination to provide consistent supervision to physicians and ensure public safety. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  6. Performance of the electrical generator cell by the ferrous alloys of printed circuit board scrap and Iron Metal 1020

    Science.gov (United States)

    Sahan, Y.; Sudarsono, S.; Silviana, E.; Chairul; Wisrayetti

    2018-04-01

    Galvani cell is one of thealternative energy. This cell can be used as an electric resources. In this research, the generator cell was designed and builds to generate the electric. The generator cell consisted of the iron metal 1020 were used as anode, the ferrous alloys of printed circuit board scrapwas then used as chatode, and NaCl solution as an electrolyte. The aim of this research is to estimate the performance of this generator cell by using variation of NaCl concentration (i.e. 1%, 3%, 5%, 7%, and 9%) with the electrodes pair ( 1 and 8 pairs). The performance of the cell was measured with a multi tester equipment and a LED bulb (5-watt 3Volt). The Results shown that the generator cell can produce the electric power of 3.679 Volt maximally by using NaCl 9% and 8 electrode pairs applied for this condition.

  7. Renewable electricity generation: supporting documentation for the Renewables Advisory Board submission to the 2006 UK energy review

    International Nuclear Information System (INIS)

    2006-01-01

    The Renewables Advisory Board (RAB) is an independent, non-departmental public body, sponsored by the DTI, which brings together representatives of the renewable sector and the unions. Electricity generation from renewable energy sources offers a range of advantages to the UK electricity-generating sector. This document, prepared as supporting documentation for the RAB submission to the 2006 Energy Review, examines the role of renewable energy in improving security of supply, lowering financial risk for energy portfolios, and reducing electricity cost volatility and fuel costs for the UK. Key topics addressed in this report include: resource security; security of supply; price security; and operational security. Also covered are variability patterns, financial costs and benefits of renewable generation. Maintaining the option and flexibility of future renewables development has a real option value, with overseas evidence showing that this can be significant

  8. Performance during internal medicine residency training and subsequent disciplinary action by state licensing boards.

    Science.gov (United States)

    Papadakis, Maxine A; Arnold, Gerald K; Blank, Linda L; Holmboe, Eric S; Lipner, Rebecca S

    2008-06-03

    Physicians who are disciplined by state licensing boards are more likely to have demonstrated unprofessional behavior in medical school. Information is limited on whether similar performance measures taken during residency can predict performance as practicing physicians. To determine whether performance measures during residency predict the likelihood of future disciplinary actions against practicing internists. Retrospective cohort study. State licensing board disciplinary actions against physicians from 1990 to 2006. 66,171 physicians who entered internal medicine residency training in the United States from 1990 to 2000 and became diplomates. Predictor variables included components of the Residents' Annual Evaluation Summary ratings and American Board of Internal Medicine (ABIM) certification examination scores. 2 performance measures independently predicted disciplinary action. A low professionalism rating on the Residents' Annual Evaluation Summary predicted increased risk for disciplinary action (hazard ratio, 1.7 [95% CI, 1.3 to 2.2]), and high performance on the ABIM certification examination predicted decreased risk for disciplinary action (hazard ratio, 0.7 [CI, 0.60 to 0.70] for American or Canadian medical school graduates and 0.9 [CI, 0.80 to 1.0] for international medical school graduates). Progressively better professionalism ratings and ABIM certification examination scores were associated with less risk for subsequent disciplinary actions; the risk ranged from 4.0% for the lowest professionalism rating to 0.5% for the highest and from 2.5% for the lowest examination scores to 0.0% for the highest. The study was retrospective. Some diplomates may have practiced outside of the United States. Nondiplomates were excluded. Poor performance on behavioral and cognitive measures during residency are associated with greater risk for state licensing board actions against practicing physicians at every point on a performance continuum. These findings support

  9. Analysis of On-Board Photovoltaics for a Battery Electric Bus and Their Impact on Battery Lifespan

    Directory of Open Access Journals (Sweden)

    Kevin R. Mallon

    2017-07-01

    Full Text Available Heavy-duty electric powertrains provide a potential solution to the high emissions and low fuel economy of trucks, buses, and other heavy-duty vehicles. However, the cost, weight, and lifespan of electric vehicle batteries limit the implementation of such vehicles. This paper proposes supplementing the battery with on-board photovoltaic modules. In this paper, a bus model is created to analyze the impact of on-board photovoltaics on electric bus range and battery lifespan. Photovoltaic systems that cover the bus roof and bus sides are considered. The bus model is simulated on a suburban bus drive cycle on a bus route in Davis, CA, USA for a representative sample of yearly weather conditions. Roof-mounted panels increased vehicle driving range by 4.7% on average annually, while roof and side modules together increased driving range by 8.9%. However, variations in weather conditions meant that this additional range was not reliably available. For constant vehicle range, rooftop photovoltaic modules extended battery cycle life by up to 10% while modules on both the roof and sides extended battery cycle life by up to 19%. Although side-mounted photovoltaics increased cycle life and range, they were less weight- and cost-effective compared to the roof-mounted panels.

  10. 76 FR 60816 - Board of Visitors, United States Military Academy (USMA)

    Science.gov (United States)

    2011-09-30

    ...Under the provisions of the Federal Advisory Committee Act of 1972 (5 U.S.C., Appendix, as amended), the Government in the Sunshine Act of 1976 (5 U.S.C. 552b, as amended), and 41 CFR 102-3.150, the Department of Defense announces that the following Federal advisory committee meeting will take place: 1. Name of Committee: United States Military Academy Board of Visitors. 2. Date: Thursday, October 27, 2011. 3. Time: 12:30 p.m.--3 p.m. Members of the public wishing to attend the meeting will need to show photo identification in order to gain access to the meeting location. All participants are subject to security screening. 4. Location: Jefferson Hall Library, Haig Room. West Point, NY. 5. Purpose of the Meeting: This is the 2011 Annual Meeting of the USMA Board of Visitors (BoV). Members of the Board will be provided updates on Academy issues. 6. Agenda: The Academy leadership will provide the Board updates on the following: the Academic program, Honor and Respect Programs and the Annual Report writing process. 7. Public's Accessibility to the Meeting: Pursuant to 5 U.S.C. 552b and 41 CFR 102-3.140 through 102-3.165, and the availability of space, this meeting is open to the public. Seating is on a first-come basis. 8. Committee's Designated Federal Officer or Point of Contact: Ms. Joy A. Pasquazi, (845) 938-5078, [email protected

  11. Low cost venom extractor based on Arduino(®) board for electrical venom extraction from arthropods and other small animals.

    Science.gov (United States)

    Besson, Thomas; Debayle, Delphine; Diochot, Sylvie; Salinas, Miguel; Lingueglia, Eric

    2016-08-01

    Extracting venom from small species is usually challenging. We describe here an affordable and versatile electrical venom extractor based on the Arduino(®) Mega 2560 Board, which is designed to extract venom from arthropods and other small animals. The device includes fine tuning of stimulation time and voltage. It was used to collect venom without apparent deleterious effects, and characterized for the first time the venom of Zoropsis spinimana, a common spider in French Mediterranean regions. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. State Electricity Commission of Victoria. Annual report 1984-1985

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    The State Electricity Commission of Victoria is a body corporate first constituted under the Electricity Commissioner's Act 1918. It now operates under the State Electricity Commission Act 1958. It generates, transmits and distributes electricity throughout Victoria's 228,000 square kilometres and supplies directly to 1.424 million customers. In addition 277,800 customers are supplied by eleven municipal authorities which purchase electricity in bulk from the Commission. The Commission also has a regulatory responsibility to ensure the safe use of electricity. It employs 22,518 people. The installed capacity of generators in the Commission's system, plus Victoria's share of Snowy and Hume generation, totalled 6603 MW at 30 June 1985 and the main transmission system comprises 500 kV, 300 kV and 220 kV lines. Corporate objectives have been developed in seven broad areas: customers,employee, finance, ntural resources, environment, conservationand community. These areas of activity are detailed in this report.

  13. Ownership structure, charateristic differences and the size of corporate board of commissioner: The case of Indonesia state-owned enterprises

    Directory of Open Access Journals (Sweden)

    Emita W. Astami

    2011-11-01

    Full Text Available This study scrutinises the association between ownership identity and board size in a unique institutional setting: state-owned enterprises in Indonesia, a country incorporating a two-tier management structure. It investigates whether the ownership identity explains the size of the board of commissioners by using the year 2006 data set from 155 SOEs in Indonesia consisting of 112 of fully SOEs and 43 of partially- privatised SOEs. This study hypothesizes that SOEs with a higher level of private sector ownership will have a greater incentive to monitor the performance of executive management through board of commissioners than those SOEs that are fully owned by the state government. It finds that compared to those fully SOEs, the partially-privatised SOEs are likely to have more board of commissioners. Even though this result is not statistically significant and, therefore, the proposed hypothesis is not statistically supported, the regression statistical analysis reveals that control variables assist in explaining the size of board of commissioners. The size of the board of directors as a control variable is significantly associated with the size of the board of commissioners. Other control variables including size of the SOE as well as the return on equity measure moderately explain the size of the board of commissioners. The findings give insight to stakeholders such as regulators or the private sector investors interested in making investment decisions in Indonesia considering the ownership structure and the effect on the effectiveness of the board of commissioners.

  14. Surface states in an external electric field

    International Nuclear Information System (INIS)

    Steslicka, M.

    1975-10-01

    Under conditions typical for field ion microscopy, true surface states can exist. Their shift towards higher energies can be quite significant and, moreover, additional surface levels at still higher energies can appear. The latter can play an important role in the process of tunneling of image gas electrons into surface states

  15. State policy change: Revenue decoupling in the electricity market

    Science.gov (United States)

    McNeil, Kytson L.

    The study seeks to answer the question, why are states adopting revenue decoupling in the electricity market, by investigating the relationship between policy adoption and attributes of the electricity market, the structure of the state utility commissions, and the political climate of the state. The study examines the period 1978-2008. Two econometric models, the marginal risk set model and the conditional risk set model, are estimated to predict the influence of covariates on the probability of the state adopting revenue decoupling in the electricity market. The models are both variants of the Cox proportional hazard model and use different underlying assumptions about the nature of adoption of revenue decoupling and when the states are considered to be at risk of adoption. Results suggest that market attributes, such as the source of electricity generation in the state, state energy intensity, and the distribution of non-public and public utilities, significantly influence the adoption of the policy. Also, the method of selecting commissioners and the party affiliation of elected officials in the state are important factors. The study concludes by suggestions to improve the implementation and evaluation of revenue decoupling in the electricity markets.

  16. The Design Process of a Board Game for Exploring the Territories of the United States

    Directory of Open Access Journals (Sweden)

    Mehmet Kosa

    2017-06-01

    Full Text Available The paper reports the design experience of a board game with an educational aspect, which takes place on the location of states and territories of the United States. Based on a territorial acquisition dynamic, the goal was to articulate the design process of a board game that provides information for individuals who are willing to learn the locations of the U.S. states by playing a game. The game was developed using an iterative design process based on focus groups studies and brainstorming sessions. A mechanic-driven design approach was adopted instead of a theme or setting-driven alternative and a relatively abstract game was developed. The initial design idea was formed and refined according to the player feedback. The paper details play-testing sessions conducted and documents the design experience from a qualitative perspective. Our preliminary results suggest that the initial design is moderately balanced and despite the lack of quantitative evidence, our subjective observations indicate that participants’ knowledge about the location of states was improved in an entertaining and interactive way.

  17. Present state of electric power business in United States and Europe

    International Nuclear Information System (INIS)

    Onishi, Kenichi

    2011-01-01

    This article reported present state of nuclear power and electric power business in United States and Europe after Fukushima Daiichi Accident. As for the trend of demand and supply of electric power and policy, the accident forced Germany possibly to proceed with phase-out of nuclear power, but France and United States to sustain nuclear power with no great change of energy policy at this moment. As for the trend of electric power market, there was not state in United States with liberalized retail market of electric power after rolling blackouts occurred in California State in the early 2000s. In Germany proceeding with renewable energy introduction, renewable electricity fed into the grid was paid for by the network operators at fixed tariffs and the costs passed on to electricity consumers were increasing. Renewable Portfolio Standards (RPS) in United States forced the state to introduction of renewable energy to some ratio, and Feed-in Tariff (FIT) introduced in EU in 1990s lead to introduction of a large amount of renewable electricity targeted in 2020. Huge amount of wind power introduction brought about several problems to solve such that excess electric power above domestic demand had bad effects on grids in neighboring region. Enforcement of power transmission lines was also needed with increase of maximum electric power as well as introduction of a large amount of renewable electricity. (T. Tanaka)

  18. On-Board State-of-Health Estimation at a Wide Ambient Temperature Range in Lithium-Ion Batteries

    Directory of Open Access Journals (Sweden)

    Tiansi Wang

    2015-08-01

    Full Text Available A state-of-health (SOH estimation method for electric vehicles (EVs is presented with three main advantages: (1 it provides joint estimation of cell’s aging states in terms of power and energy (i.e., SOHP and SOHE—because the determination of SOHP and SOHE can be reduced to the estimation of the ohmic resistance increase and capacity loss, respectively, the ohmic resistance at nominal temperature will be taken as a health indicator, and the capacity loss is estimated based on a mechanistic model that is developed to describe the correlation between resistance increase and capacity loss; (2 it has wide applicability to various ambient temperatures—to eliminate the effects of temperature on the resistance, another mechanistic model about the resistance against temperature is presented, which can normalize the resistance at various temperatures to its standard value at the nominal temperature; and (3 it needs low computational efforts for on-board application—based on a linear equation of cell’s dynamic behaviors, the recursive least-squares (RLS algorithm is used for the resistance estimation. Based on the designed performance and validation experiments, respectively, the coefficients of the models are determined and the accuracy of the proposed method is verified. The results at different aging states and temperatures show good accuracy and reliability.

  19. Forecasting the electricity consumption of the Mexican border states maquiladoras

    Energy Technology Data Exchange (ETDEWEB)

    Flores, C.E.; Phelan, P.E. [Arizona State Univ., Dept. of Mechanical and Aerospace Engineering, Tempe, AZ (United States); Mou, J.-I. [Taiwan Semiconductor Manufacturing Co., Operation Planning Div., Hsin-Chu (Taiwan); Bryan, H. [Arizona State Univ., School of Architecture, Tempe, AZ (United States)

    2004-07-01

    The consumption of electricity by maquiladora industries in the Mexican border states is an important driver for determining future powerplant needs in that area. An industrial electricity forecasting model is developed for the border states' maquiladoras, and the outputs are compared with a reference forecasting model developed for the US industrial sector, for which considerably more data are available. This model enables the prediction of the effect of implementing various energy efficiency measures in the industrial sector. As an illustration, here the impact of implementing energy-efficient lighting and motors in the Mexican border states' maquiladoras was determined to be substantial. Without such energy efficiency measures, electricity consumption for these industries is predicted to rise by 64% from 2001 to 2010, but if these measures are implemented on a gradual basis over the same time period, electricity consumption is forecast to rise by only 36%. (Author)

  20. Conventional, hybrid, plug-in hybrid or electric vehicles? State-based comparative carbon and energy footprint analysis in the United States

    International Nuclear Information System (INIS)

    Onat, Nuri Cihat; Kucukvar, Murat; Tatari, Omer

    2015-01-01

    Highlights: • Driving patterns and electricity generation mix influence vehicle preferences. • EVs are found to be least carbon-intensive vehicle option in 24 states. • HEVs are found to be the most energy-efficient option in 45 states. • EVs across the board are unfavorable in the marginal electricity mix scenario. • Use of renewable energy to power EVs/PHEVs is crucial. - Abstract: Electric vehicles (EVs), plug-in hybrid electric vehicles (PHEVs), and hybrid electric vehicles (HEVs) are often considered as better options in terms of greenhouse gas emissions and energy consumption compared to internal combustion vehicles. However, making any decision among these vehicle options is not a straightforward process due to temporal and spatial variations, such as the sources of the electricity used and regional driving patterns. In this study, we compared these vehicle options across 50 states, taking into account state-specific average and marginal electricity generation mixes, regional driving patterns, and vehicle and battery manufacturing impacts. Furthermore, a policy scenario proposing the widespread use of solar energy to charge EVs and PHEVs is evaluated. Based on the average electricity generation mix scenario, EVs are found to be least carbon-intensive vehicle option in 24 states, while HEVs are found to be the most energy-efficient option in 45 states. In the marginal electricity mix scenario, widespread adoption of EVs is found to be an unwise strategy given the existing and near-future marginal electricity generation mix. On the other hand, EVs can be superior to other alternatives in terms of energy-consumption, if the required energy to generate 1 kW h of electricity is below 1.25 kW h

  1. Generation of electricity and combustible gas by utilization of agricultural waste in Nara canal area water board

    International Nuclear Information System (INIS)

    Joyo, P.; Memon, F.; Sohag, M.A.

    2005-01-01

    Biomass in an important source of energy, however, it is not fully utilized in Sindh. The various types of biomass normally used for the generation of energy are extensively available in the province. These are forest debris and thinning; residue from wood products industry; agricultural waste; fast-growing trees and crops; wood and wood waste; animal manures and non-hazardous organic portion of municipal solid waste. Since agriculture is pre-dominant in Sindh, it has a large amount of agricultural waste available in most of the areas. Agriculture wastes like rice husk, wheat straw, cotton stalks, and sugarcane bagasse can be utilized to produce gas and afterwards electricity. Pakistan Agricultural Research Council (PARC) has found that at most of the locations of Sindh, agricultural waste is available more than the energy requirements of that particular area. Biomass can also generate electricity (or heat) in one of the several processes, can be used in a piston driven engine, high efficiency gas turbine generator or a fuel cell to produce electricity. Biomass gasifies have gained attention for their efficiency, economy and environment-friendly. The Nara Canal Area Water Board is facing acute problem of electricity in the O and M of its drainage network and running of tube wells. The frequent breakdown and irregular supply of power is badly affecting in the management of drainage system and control of rising water-table, however, it is anticipated that the generation of electricity through biomass can address this acute problem and greatly help in controlling water logging and salinity in Sindh. (author)

  2. Energy Management of Hybrid Electric Vehicles: 15 years of development at the Ohio State University

    Directory of Open Access Journals (Sweden)

    Rizzoni Giorgio

    2015-01-01

    Full Text Available The aim of this paper is to document 15 years of hybrid electric vehicle energy management research at The Ohio State University Center for Automotive Research (OSUCAR. Hybrid Electric Vehicle (HEV technology encompasses many diverse aspects. In this paper we focus exclusively on the evolution of supervisory control strategies for on-board energy management in HEV. We present a series of control algorithms that have been developed in simulation and implemented in prototype vehicles for charge-sustaining HEVs at OSU-CAR. These solutions span from fuzzy-logic control algorithms to more sophisticated model-based optimal control methods. Finally, methods developed for plug-in HEVs energy management are also discussed

  3. Cooperative work program between ERDA/OWI and the Swedish State Power Board on waste storage in mined caverns

    International Nuclear Information System (INIS)

    Witherspoon, P.A.

    1977-01-01

    Recent conferences between members of OWI and LBL, and members of the Swedish State Power Board have revealed that an abandoned iron ore mine in Stripa, Sweden, can be used in a very profitable manner for a cooperative work program on the problem of radioactive waste storage in mined caverns. The main thrust of this cooperative work program will be to determine the feasibility of using a mined cavern in hard rock as a permanent repository for high level radioactive materials. The ERDA/OWI program is directed along different lines that complement the Swedish program. Seven tasks are involved as follows: Task 1 will investigate over a two-year period the temperature effects in the granite rock mass at Stripa using a full scale electric heater that simulates the energy output of radioactive waste canisters. Task 2 will determine the long term effect of waste heat in a fractured rock mass. Task 3 will assess the fracture hydrology in the Stripa mine. Task 4 will involve geophysical measurements to determine the locations of the fracture system in the granite rock mass. Task 5 is a laboratory investigation on the measurement of rock properties that are urgently needed in the overall problem of evaluating repository sites in the U.S. Task 6 will involve a method of measuring the gross seepage rate in the low permeability granitic rocks at Stripa. Task 7 will determine the virgin state of stress in the fractured granite rock mass at Stripa

  4. Fast Data Acquisition system based on NI-myRIO board with GPS time stamping capabilities for atmospheric electricity research

    International Nuclear Information System (INIS)

    Pokhsraryan, D.

    2016-01-01

    In the investigation of the fast physical processes, such as propagation of a lightning leader and detection of the correspondent radio emission waveforms, it is crucial to synchronize the corresponding signals in order to be able to create a model of the lightning initiation. Therefore, the DAQ system should be equipped with a GPS synchronization capability. In the presented report, we describe the DAQ system based on a NI-myRio board that provides detection of particle fluxes, the near-surface electric field disturbances and waveforms of radio signals from atmospheric discharges, all synchronized with an accuracy of tens of nanoseconds. The results of the first measurements made at Aragats high-altitude station of Yerevan Physics Institute in Summer-Autumn 2015 are presented and discussed. (author)

  5. Implications of State Dental Board Disciplinary Actions for Teaching Dental Students About Emotional Intelligence.

    Science.gov (United States)

    Munk, Lyle Kris

    2016-01-01

    The primary emphasis in dental education is on developing students' cognitive intelligence (thinking) and technical intelligence (doing), while emotional intelligence (being) receives less emphasis. The aim of this study was to explore a potential consequence of the paucity of emotional intelligence education by determining the level of emotional intelligence-related (EI-R) infractions in state dental board disciplinary actions and characterizing the types of those infractions. For this study, 1,100 disciplinary action reports from 21 state dental boards were reviewed, and disciplinary infractions were classified as cognitive intelligence-related (CI-R) infractions, technical intelligence-related (TI-R) infractions, and EI-R infractions. EI-R infractions were then subcategorized into emotional intelligence clusters and competencies using the Emotional and Social Competency Inventory (ESCI). The results showed that 56.6% of the infractions were EI-R. When the EI-R infractions were subcategorized, the four competencies most frequently violated involved transparency, teamwork and collaboration, organizational awareness, and accurate self-assessment. Understanding the frequency and nature of EI-R infractions may promote awareness of the need for increased attention to principles of emotional intelligence in dental education and may encourage integration of those principles across dental curricula to help students understand the impact of emotional intelligence on their future well-being and livelihood.

  6. New concept of electrical drives for paper and board machines based on energy efficiency principles

    Directory of Open Access Journals (Sweden)

    Jeftenić Borislav

    2006-01-01

    Full Text Available In this paper, it is described how the reconstruction of the facility of paper machine has been conducted, at the press and drying part of the machine in June 2001, as well as the expansion of the Paper Machine with the "third coating" introducing, that has been done in July 2002, in the board factory "Umka". The existing old drive of the press and the drive of drying groups were established as a Line Shaft Drive, 76 m long. The novel drive is developed on the basis of conventional squirrel cage induction motor application, with frequency converter. The system control is carried out with the programmable controller, and the communication between controllers, converters, and control boards is accomplished trough profibus. Reconstruction of the coating part of the machine, during technological reconstruction of this part of the machine, was being conducted with a purpose to improve performance of the machine by adding device for spreading "third coating". The demands for the power facility were to replace existing facility with the new one, based on energy efficiency principles and to provide adequate facility for new technological sections. Also, new part of the facility had to be connected with the remaining part of the machine, i.e. with the press and drying part, which have been reconstructed in 2001. It has to be stressed that energy efficiency principles means to realize new, modernized drive with better performances and greater capacity for the as small as possible amount of increased installed power of separate drives. In the paper are also, graphically presented achieved energy savings results, based on measurements performed on separate parts of paper machine, before and after reconstruction. .

  7. Envisioning a renewable electricity future for the United States

    International Nuclear Information System (INIS)

    Mai, Trieu; Mulcahy, David; Hand, M. Maureen; Baldwin, Samuel F.

    2014-01-01

    This paper presents high renewable electricity penetration scenarios in the United States using detailed capacity expansion modeling that is designed to properly account for the variability and uncertainty of wind and solar resources. The scenarios focus solely on the electricity system, an important sector within the larger energy sector, and demonstrate long-term visions of a U.S. power system where renewable technologies, including biomass, geothermal, hydropower, solar, and wind, contribute 80% of 2050 annual electricity, including 49–55% from wind and solar photovoltaic generation. We present the integration challenges of achieving this high penetration and characterize the options to increase grid flexibility to manage variability. Four high renewable pathways are modeled and demonstrate the robustness and diversity of renewable options. We estimate 69–82% annual greenhouse gas emission reductions and 3%–30% incremental electricity price increases associated with reaching 80%-by-2050 renewable electricity relative to reference scenarios. This paper affirms and strengthens similar analysis from the Renewable Electricity Futures study by using an improved model and updated data to better reflect investment and dispatch decisions under current outlooks for the U.S. electricity sector. - Highlights: • We model high renewable electricity scenarios for the U.S. electricity sector. • The mix of technologies will depend on future costs and system conditions. • Integration challenges and flexibility options are presented. • We estimate an incremental electricity price increase of 3–30% to achieve 80% RE (renewable electricity). • We estimate 69–82% reduction in annual carbon emissions with 80% RE

  8. WeaselBoard :

    Energy Technology Data Exchange (ETDEWEB)

    Mulder, John C.; Schwartz, Moses Daniel; Berg, Michael J.; Van Houten, Jonathan Roger; Urrea, Jorge Mario; King, Michael Aaron; Clements, Abraham Anthony; Jacob, Joshua A.

    2013-10-01

    Critical infrastructures, such as electrical power plants and oil refineries, rely on programmable logic controllers (PLCs) to control essential processes. State of the art security cannot detect attacks on PLCs at the hardware or firmware level. This renders critical infrastructure control systems vulnerable to costly and dangerous attacks. WeaselBoard is a PLC backplane analysis system that connects directly to the PLC backplane to capture backplane communications between modules. WeaselBoard forwards inter-module traffic to an external analysis system that detects changes to process control settings, sensor values, module configuration information, firmware updates, and process control program (logic) updates. WeaselBoard provides zero-day exploit detection for PLCs by detecting changes in the PLC and the process. This approach to PLC monitoring is protected under U.S. Patent Application 13/947,887.

  9. Trends in lumber processing in the western United States. Part I: board foot Scribner volume per cubic foot of timber

    Science.gov (United States)

    Charles E. Keegan; Todd A. Morgan; Keith A. Blatner; Jean M. Daniels

    2010-01-01

    This article describes trends in board foot Scribner volume per cubic foot of timber for logs processed by sawmills in the western United States. Board foot to cubic foot (BF/CF) ratios for the period from 2000 through 2006 ranged from 3.70 in Montana to 5.71 in the Four Corners Region (Arizona, Colorado, New Mexico, and Utah). Sawmills in the Four Corners Region,...

  10. The Efficiency of the National Electricity Board in Malaysia – an Intercountry Comparison

    OpenAIRE

    Jamaluddin bin Mohd Yunos; David Hawdon

    1996-01-01

    One of the most pressing questions facing developing countries and the international agencies that finance their economic programmes is the appropriate way in which to operate and manage their power industries. Until recently, power industries have been regarded as public sector utilities to be operated as monopolies in order to achieve a variety of policy goals. Much international policy has been directed towards reducing the state’s role in the electricity sector, and promoting efforts to p...

  11. Choice between hierarchy and market: Case of Central Electricity Generating Board's reorganization

    International Nuclear Information System (INIS)

    Caroli, M.

    1992-01-01

    Through the use of the 'Organization and Market' theoretical approach, this article outlines CEGB's reorganization to evaluate this experience under the strategic planning and operating effectiveness perspectives. The first part synthesizes the basic points of the 1990 reform which divided CEGB into three different companies and separated the control of the generation of electric power from its transport. The second part summarizes the main considerations about conditions of efficiency of vertical integration and disintegration, according to the 'Organization and Market' approach. By utilizing the conclusions highlighted in the first two parts of this article, the third one studies the effects of CEGB's vertical disintegration on the level of competition in power generation market; on CEGB's strategic effectiveness and operative efficiency; and on transactional costs in the electric power industry. CEGB's reorganization does not seem to have had a relevantly positive effect on competition, while it has caused a strategic burden and a significant increase of transactional costs in the exchange of electricity between the generator and the transmitter

  12. 77 FR 14006 - Board of Visitors, United States Military Academy (USMA)

    Science.gov (United States)

    2012-03-08

    ... Harassment/Assault Response and Prevention, Supporting US Army Strategies, and the DAIG Cemetery Inspection... Organizational Meeting of the USMA Board of Visitors (BoV). Members of the Board will be provided updates on...

  13. Propaganda Versus Genocide: The United States War Refugee Board and the Hungarian Holocaust

    Directory of Open Access Journals (Sweden)

    Dorottya Halász

    2012-01-01

    Full Text Available In 1944 the Second World War had been raging for more than four long years, with the death toll among soldiers and civilians alike climbing. European Jews constituted a special group of the victims, a fact that leaders of the Allied powers failed to acknowledge. In January 1944 a major revision of previous government policy was brought about in the United States with the establishment of the War Refugee Board in Washington, promising an American commitment to the rescue of European war refugees, including Jews. In March of the same year the situation for Jewish inhabitants in Hungary turned dire as German forces occupied the country. For lack of any other instantly applicable way to influence Hungarian developments, leaders of the new American War Refugee Board decided to launch a propaganda campaign to fight the Nazis and their accomplices. This paper will examine the motivations of American policy makers in focusing on political propaganda measures during the first phase of the Hungarian Holocaust (March–July 1944, and it will describe the logic and workings of the campaign as a means to save Hungary’s Jewry in the last full year of the Second World War.

  14. ON-BOARD MONITORING OF TECHNICAL STATE FOR POWER UNITS OF WHEELED AND TRACKED VEHICLES

    Directory of Open Access Journals (Sweden)

    Yu. D. Karpievich

    2016-01-01

    Full Text Available The paper considers new methodologies pertaining to on-board diagnosis of wear-out rate for friction linings of a clutch driven disk and friction discs of a hydraulic press clutch of transmission gear boxes which are based on physical process that uses friction work as an integrated indicator. A new methodology in determination of life-span rate for engine oil has been developed in the paper. The paper presents block schematic diagrams for on-board monitoring of technical state for power units of wheeled and tracked vehicles. Usage of friction work as an integrated indicator for determination of wear-out rate for friction linings of clutch driven disk and friction discs of a haydraulic press clutch makes it possible timely at any operational period of wheeled and tracked vehicles to determine their residual operation life and forecast their replacement.While taking volume of the used fuel for determination of engine oil life-span rate it permits quickly and effectively at any operational period of wheeled and tracked vehicles to determine residual useful life of the engine oil and also forecast its replacement.

  15. Power in trust: the environmental history of the Central Electricity Generating Board

    International Nuclear Information System (INIS)

    Sheail, John

    1991-01-01

    The rapid and large-scale development of the electricity supply industry in the United Kingdom since the early years of the century has brought to the fore a large number of environmental issues. affecting the use of town and countryside, rivers and coastal waters, and the protection of amenity, wildlife, and out-door recreational interests. Few industries have experienced so much opposition. As the industry found to its cost, the basic attributes of land, air, and water are never so much cherished as when they are threatened by some novel form of development. Few enterprises have been so resourceful in responding to this public concern. Great importance has been attached to explaining development policies and technical options. Large programmes of research have been carried out. This is the first book to examine in depth the environmental issues that have arisen since the National Grid was first planned in the 1920s. The main focus is on the impact of power stations and the main transmission lines of England and Wales since the nationalization of the industry in 1947. Insights are provided into how issues were regarded at the time, and the manner in which they were tackled within the opportunities and constraints presented by advances in the use of coal, oil, hydro-electricity, and nuclear power. The story ends with the privatization of the industry under the Electricity Act of 1989. A distinctive feature of the book is the considerable use made of the archives of the industry itself, and of the Government departments and other bodies with which the industry had to work. Much of this material has not previously been published. (author)

  16. Solid state cloaking for electrical charge carrier mobility control

    Science.gov (United States)

    Zebarjadi, Mona; Liao, Bolin; Esfarjani, Keivan; Chen, Gang

    2015-07-07

    An electrical mobility-controlled material includes a solid state host material having a controllable Fermi energy level and electrical charge carriers with a charge carrier mobility. At least one Fermi level energy at which a peak in charge carrier mobility is to occur is prespecified for the host material. A plurality of particles are distributed in the host material, with at least one particle disposed with an effective mass and a radius that minimize scattering of the electrical charge carriers for the at least one prespecified Fermi level energy of peak charge carrier mobility. The minimized scattering of electrical charge carriers produces the peak charge carrier mobility only at the at least one prespecified Fermi level energy, set by the particle effective mass and radius, the charge carrier mobility being less than the peak charge carrier mobility at Fermi level energies other than the at least one prespecified Fermi level energy.

  17. Effects of on-board storage and electrical stunning of wild cod (Gadus morhua) and haddock (Melanogrammus aeglefinus) on brain and heart activity

    NARCIS (Netherlands)

    Lambooij, E.; Digre, H.; Reimert, H.G.M.; Aursand, I.G.; Grimso, L.; Vis, van de J.W.

    2012-01-01

    Cod and haddock captured with commercial trawling gear were taken immediately after landing on deck to on-board storage in dry bins for measuring brain and heart activity, and behaviour. Other groups were first stored in holding tanks and then electrically stunned with a prototype "dry stunner". For

  18. A Cross-Country Comparison of Virtual Discussion Board Use in United States and Costa Rican Education Settings

    Science.gov (United States)

    Hodge, Kari; Saxon, Terrill F.; Trumble, Jason

    2013-01-01

    The purpose of the current study was to compare the use of virtual discussion boards in various educational settings in the United States and Costa Rica. Participants included professors of education, in-service and pre-service teachers in the United States and Costa Rica where a survey was used that included demographic, knowledge, attitude, and…

  19. Status of electricity trading in the United States

    International Nuclear Information System (INIS)

    McMillan, P.H.

    1999-01-01

    The evolution of the energy marketplace in the United States is presented in a series of overhead viewgraphs. The influencing factors of energy trading are described as being supply concentration, rate cross subsidization, price volatility, physics, stranded investment, market structure and value drivers. A map depicting trading hubs and market structures is included, along with an outline of the key characteristics of a successful market hub. Gas-electric interface issues are also discussed. It was stated that contrary to conventional wisdom that as gas and electricity markets converge, traders will routinely cross-hedge gas and power, the practical reality is that volatility of the gas to electricity basis spread actually limits hedging opportunities. A winning strategy should include thorough fundamental and technical analysis; every trade or position should have a well thought-out exit strategy; get closer to physical assets; and be careful across regional hubs and commodities. 2 tabs., 7 figs

  20. Electricity supply in India

    International Nuclear Information System (INIS)

    Abbott, H.J.

    1993-09-01

    This briefing deals with the electricity supply industry in India in two parts. In the first, the structure and organization of the industry is described under sections dealing with national government involvement, energy policy, state electricity boards, regional electricity boards, state corporations, the private sector and private investment in the power sector including foreign investment. Secondly, the power supply system is described covering generation, plant load factor, non-utility generation, nuclear power, transmission and distribution, system losses and electricity consumption. (8 tables) (UK)

  1. Political determinants of electricity provision in small island developing states

    International Nuclear Information System (INIS)

    Boräng, Frida; Jagers, Sverker C.; Povitkina, Marina

    2016-01-01

    This paper approaches provision of affordable and reliable electricity in Small Island Developing States (SIDS) as a case of public good provision. It aims to contribute to our understanding of how regime type and the quality of implementing institutions within political systems affect the prerequisites for successful electrification in SIDS. More specifically, we analyse the independent and interdependent effects of level of democracy and control of corruption on per capita household electricity consumption in SIDS, using data from 34 SIDS over the period 1996–2009. The results show that although the independent effects of level of democracy and control of corruption are sensitive to model specification, these two factors do have an interdependent impact on per capita household electricity consumption: democratization has positive effects on provision of electricity to the general population only when there is a certain level of corruption control in place. The results imply a) that it is important for policy actors to acknowledge the interaction between regime type and the quality of implementing institutions, and b) when planning electrification projects in SIDS, it is necessary to have information about the social and political context in order to design the most effective projects. - Highlights: • Effects of political institutions on household electricity consumption in SIDS. • Electrification is seen as an example of public good provision. • Democracy has a positive impact on electricity consumption when corruption is low. • Electrification projects can gain from being sensitive to institutional context.

  2. State Waste Discharge Permit Application: Electric resistance tomography testing

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    This permit application documentation is for a State Waste Discharge Permit issued in accordance with requirements of Washington Administrative Code 173-216. The activity being permitted is a technology test using electrical resistance tomography. The electrical resistance tomography technology was developed at Lawrence Livermore National Laboratory and has been used at other waste sites to track underground contamination plumes. The electrical resistance tomography technology measures soil electrical resistance between two electrodes. If a fluid contaminated with electrolytes is introduced into the soil, the soil resistance is expected to drop. By using an array of measurement electrodes in several boreholes, the areal extent of contamination can be estimated. At the Hanford Site, the purpose of the testing is to determine if the electrical resistance tomography technology can be used in the vicinity of large underground metal tanks without the metal tank interfering with the test. It is anticipated that the electrical resistance tomography technology will provide a method for accurately detecting leaks from the bottom of underground tanks, such as the Hanford Site single-shell tanks.

  3. State Waste Discharge Permit Application: Electric resistance tomography testing

    International Nuclear Information System (INIS)

    1994-04-01

    This permit application documentation is for a State Waste Discharge Permit issued in accordance with requirements of Washington Administrative Code 173-216. The activity being permitted is a technology test using electrical resistance tomography. The electrical resistance tomography technology was developed at Lawrence Livermore National Laboratory and has been used at other waste sites to track underground contamination plumes. The electrical resistance tomography technology measures soil electrical resistance between two electrodes. If a fluid contaminated with electrolytes is introduced into the soil, the soil resistance is expected to drop. By using an array of measurement electrodes in several boreholes, the areal extent of contamination can be estimated. At the Hanford Site, the purpose of the testing is to determine if the electrical resistance tomography technology can be used in the vicinity of large underground metal tanks without the metal tank interfering with the test. It is anticipated that the electrical resistance tomography technology will provide a method for accurately detecting leaks from the bottom of underground tanks, such as the Hanford Site single-shell tanks

  4. The Manitoba Hydro-Electric Board, 40th annual report for the year ended March 31, 1991

    International Nuclear Information System (INIS)

    1991-01-01

    A report is presented of the year's activities of the corporation responsible for supplying electric power to Manitoba. The corporation serves all areas of the province except central Winnipeg, and its 11 generating stations have a capability of nearly 4 million kW, of which ca 3.5 millon kW is hydraulic. The various sections of the report present information on customer services; electricity generated, purchased, and exported; system development, including construction of new power plants; research and development; environmental services; personnel policies; and water management. Financial statements are also provided. Highlights of the year include: a net income of $48.6 million for the year ending 31 March 1991; the first four units of the Limestone Generating Station were placed in service ahead of schedule and under budget; the Corporation's development plans for major generation and transmission facilities received the endorsement of the Public Utilities Board; a major settlement was reached with the people of Chemawawin/Easterville and Moose Lake with respect to outstanding responsibilities related to the development of the Grand Rapids Generating Station; an agreement was reached with the Cross Lake Band of Indians to construct a weir that will create a water regime on Cross Lake that reduces or eliminates the adverse effects caused by the Lake Winnipeg Regulation Project; an export sale agreement was signed with Ontario Hydro which provides for the delivery by Manitoba Hydro of 200 megawatts of firm capacity in each year of the three-year agreement; a major commitment to energy conservation; and the employee safety record was substantially improved. 11 figs

  5. State Electricity Commission of Victoria annual report 1991/92

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The 73rd annual report of the State Electricity Commission (SEC) of Victoria covers the financial year ended 30 June 1992. A total revenue of 3,300 million dollars and a net profit of 155.7 million dollars was recorded. There was continued improvement in employee productivity. Progress was made on the Victorian Power Pool (VicPool) pooling arrangement in anticipation of open access to the power grid. A 3-year business plan was formulated and corporate strategy revised. The Strategic Research Program on brown coal technologies, aimed at reducing costs of electricity and emissions of CO[sub 2], continued. Environmental activities continued in the areas of renewable energy source development, air quality monitoring, acid rain, water management, land rehabilitation and improvements to powerlines. The report includes statistical data on customer statistics, electricity sales, power stations, brown coal and briquette production and financial sales.

  6. The State Electricity Commission of Victoria and the greenhouse effect

    International Nuclear Information System (INIS)

    Hoy, R.D.

    1990-01-01

    The State Electricity Commission of Victoria is examining how the greenhouse issue may affect its electricity supply system in the future. Possible generation scenarios for 2005 are presented in order to show how the Toronto goal of a 20% reduction on 1988 levels of CO 2 emissions could be achieved. The main approaches to achieving these emission reductions include energy conservation and cogeneration, new gas-fired plant, use of renewable energy, reduction of energy system losses, retirement of older brown coal plant and an extensive tree planting program. It is estimated that achieving the Toronto goal would require electricity prices to rise by 1% to 1.5%, on average, each year by more than they otherwise would have, for the next 15 years. 12 refs., 3 tabs

  7. Comprehensive characterization of printed circuit boards of various end-of-life electrical and electronic equipment for beneficiation investigation.

    Science.gov (United States)

    Anshu Priya; Hait, Subrata

    2018-05-01

    Comprehensive characterization of printed circuit board (PCB) of end-of-life electrical and electronic equipment (EEE) is obligatory for prospective profitable beneficiation. In this study, beneficiation oriented comprehensive characterization of two brands of PCBs each of 16 end-of-life EEE was conducted in terms of their physicochemical characteristics with special emphasis on the content of 16 general elements, 2 precious metals and 15 rare earth elements (REEs). General elements and their highest weight percent composition found in different PCBs of the EEEs were Cu (23% in laptop), Al (6% in computer), Pb (15% in DVD player) and Ba (7% in TV). The high abundant of precious metals such as Au (316 g/ton) and Ag (636 g/ton) in mobile phone and laptop, respectively coupled with rapid obsolescence age makes waste PCBs of information technology and telecommunication equipment the most potent resource reservoir. Additionally, most of the waste PCBs were observed to contain REEs in considerable quantity with Sc up to 31 g/ton and Ce up to 13 g/ton being the major constituents. Comprehensive characterization of waste PCBs therefore will systematically help towards better understanding of e-waste recycling processes for beneficiation purpose and sustainable resource circulation and conservation. Copyright © 2018 Elsevier Ltd. All rights reserved.

  8. 77 FR 31339 - Board of Visitors, United States Military Academy (USMA)

    Science.gov (United States)

    2012-05-25

    .... Agenda: The Academy leadership will provide the Board updates on the following: Physical, Moral/Ethical... (STAP), Academic Individual Advanced Development (AIAD); the Admissions Program, including the...

  9. United States/Mexico electricity exchanges. [History, incentives, and constraints

    Energy Technology Data Exchange (ETDEWEB)

    None,

    1980-05-01

    As a result of the agreement between the respective presidents, a joint study was undertaken to analyze the possibilities of increasing the international electricity exchange between the two countries. Responsibility for this undertaking was assigned to the United States Department of Energy (DOE) and to the Direccion de Energia de Mexico (DEM) through the Comision Federal de Electricidad (CFE). Representatives from Mexico and the US were chosen from the regional utilities along the border between the two countries and made up working groups that particiated in the study. With the support of both governments, and a high degree of cooperation between the two countries, work on the study was completed within fourteen months The completion of the study has been a major step in broadening the base of bilateral energy relations. the study highlights the opportunities for increased electricity exchanges, which could increase cooperation along the common border. Expansion of electricity interchange could offer substantial economic benefit to both countries, both directly and indirectly. Direct benefits include increased reliability of electric power and cost savings through economies of scale and diversity of peak demand patterns. Indirect benefits include improved economic and employment opportunities, especially in the border areas of both countries. This report provides background on the history of past exchanges and the characteristics of the US and Mexico electric systems, a summary of opportunities and incentives, and suggestions for procedures to remove obstacles and constraints.

  10. Identifying future electricity-water tradeoffs in the United States

    International Nuclear Information System (INIS)

    Sovacool, Benjamin K.; Sovacool, Kelly E.

    2009-01-01

    Researchers for the electricity industry, national laboratories, and state and federal agencies have begun to argue that the country could face water shortages resulting from the addition of thermoelectric power plants, but have not attempted to depict more precisely where or how severe those shortages will be. Using county-level data on rates of population growth collected from the US Census Bureau, utility estimates of future planned capacity additions in the contiguous United States reported to the US Energy Information Administration, and scientific estimates of anticipated water shortages provided from the US Geologic Survey and National Oceanic and Atmospheric Administration, this paper highlights the most likely locations of severe shortages in 22 counties brought about by thermoelectric capacity additions. Within these areas are some 20 major metropolitan regions where millions of people live. After exploring the electricity-water nexus and explaining the study's methodology, the article then focuses on four of these metropolitan areas - Houston, Texas; Atlanta, Georgia; Las Vegas, Nevada; New York, New York - to deepen an understanding of the water and electricity challenges they may soon be facing. It concludes by identifying an assortment of technologies and policies that could respond to these electricity-water tradeoffs.

  11. Joint management of water and electricity in State Water Project

    Science.gov (United States)

    Yang, T.

    2013-12-01

    Understanding the relationship between California's water and electrical power is important for improving the management and planning of these two vital resources to the state's economy development and people's well-being. It is often unclear for consumers, managers and decision-makers that water and electricity in California are inextricably connected. In the past, insufficient considerations of electricity production, consumption and cost in the State Water Project (SWP) - the world's largest publicly built and operated water and power development and conveyance system-has led to significant water rate and electricity rate increase. An innovative concept of this proposed study is developing new technology capable of managing and planning water and power jointly in SWP to promote its operation efficiency, sustainability and resilience to potential water shortage caused by climate change and population increase. To achieve this goal, a nonlinear, two-fold network model describing water delivery in company with power consumption and generation will be constructed, and a multi-objective optimization scheme is to be used to resolve this complex nonlinear network problem.

  12. Identifying future electricity-water tradeoffs in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Sovacool, Benjamin K. [Energy Governance Program, Centre on Asia and Globalisation, Lee Kuan Yew School of Public Policy, National University of Singapore (Singapore); Sovacool, Kelly E. [Department of Geography, Virginia Polytechnic Institute and State University, Blacksburg, VA (United States)

    2009-07-15

    Researchers for the electricity industry, national laboratories, and state and federal agencies have begun to argue that the country could face water shortages resulting from the addition of thermoelectric power plants, but have not attempted to depict more precisely where or how severe those shortages will be. Using county-level data on rates of population growth collected from the US Census Bureau, utility estimates of future planned capacity additions in the contiguous United States reported to the US Energy Information Administration, and scientific estimates of anticipated water shortages provided from the US Geologic Survey and National Oceanic and Atmospheric Administration, this paper highlights the most likely locations of severe shortages in 22 counties brought about by thermoelectric capacity additions. Within these areas are some 20 major metropolitan regions where millions of people live. After exploring the electricity-water nexus and explaining the study's methodology, the article then focuses on four of these metropolitan areas - Houston, Texas; Atlanta, Georgia; Las Vegas, Nevada; New York, New York - to deepen an understanding of the water and electricity challenges they may soon be facing. It concludes by identifying an assortment of technologies and policies that could respond to these electricity-water tradeoffs. (author)

  13. Demonstration of glass-based photonic interposer for mid-board-optical engines and electrical-optical circuit board (EOCB) integration strategy

    Science.gov (United States)

    Schröder, H.; Neitz, M.; Schneider-Ramelow, M.

    2018-02-01

    Due to its optical transparency and superior dielectric properties glass is regarded as a promising candidate for advanced applications as active photonic interposer for mid-board-optics and optical PCB waveguide integration. The concepts for multi-mode and single-mode photonic system integration are discussed and related demonstration project results will be presented. A hybrid integrated photonic glass body interposer with integrated optical lenses for multi-mode data communication wavelength of 850 nm have been realized. The paper summarizes process developments which allow cost efficient metallization of TGV. Electro-optical elements like photodiodes and VCSELs can be directly flip-chip mounted on the glass substrate according to the desired lens positions. Furthermore results for a silicon photonic based single-mode active interposer integration onto a single mode glass made EOCB will be compared in terms of packaging challenges. The board level integration strategy for both of these technological approaches and general next generation board level integration concepts for photonic interposer will be introductorily discussed.

  14. A Critical Analysis of Foster Youth Advisory Boards in the United States

    Science.gov (United States)

    Forenza, Brad; Happonen, Robin G.

    2016-01-01

    Background: The enactment of the John H. Chafee Foster Care Independence Act brought welcome attention to young people aging out of foster care, and sought to include them in both case planning and policy dialog. Foster Youth Advisory Boards help to promote such inclusion, though the implementation of those boards has not been formally analyzed.…

  15. State aid in the Austrian electricity industry law

    International Nuclear Information System (INIS)

    Rehulka, J.

    2009-01-01

    The present work deals with the existence of State aid in the Austrian electricity industry and focuses on three selected areas of the Austrian legal system, which are examined for their compatibility with Community law. Subject of the first part of this work is a representation of the article 87 ff Treaty of Rome and its impact on Austrian provisions on the promotion of electricity from renewable energies or on the promotion of cogeneration energy. In this context, the first principles of the European state aid law and in particular the European Court are presented regarding the existence of State aid. Here, the Rsp of the Court in connection with the use of State resources in the Rs PreussenElektra Stardust Marine and Pearle is paid in connection with para-fiscal levies special attention. The evaluation of the Austrian support model is based on PreussenElektra, Stardust Marine and Pearle. Then the system of green electricity production in Austria represented. In addition to the Community law principles (green power directive, frameworks and guidelines for environmental aid) is here in particular the 'Oekostromgesetz' and treated it's novellas. It is an intensive discussion with the Commission's decisions on the compatibility of the green power and CHP funding and the funding of the countries with state aid rules. As part of this analysis is to attempt a classification of the Commission's practice in the Community legal system. The second part of the work deals with the determination of absorbed. System utilization rates and their distribution to the network operator. After a presentation of the Community legislation (EC regulations, the internal electricity market directives) and Rsp of the European Court of Justice (Case ADBHu, Ferring, Altmark Trans) to services of general economic interest is first attempted to determine the presence of these services in the 216 Austrian legislation. Here, the question will be, entrusted with services of general economic

  16. State of hydration and electrical conductance of ichthyotic skin

    OpenAIRE

    A B Gupta; Manisha Bhattacharya; B Haldar

    1990-01-01

    Dry skin of twelve subjects suffering from ichthyosis vulgaris and the efficacy of a moisturiser-Cotaryl were quantitatively assessed by measuring the skin surface hydration and high frequency (3.5 MHz) electrical conductance of skin. The state of hydration and conductance of ichthyotic skin were 86.9 + 24.6 and 11.0 + 5.7 micro-mho respectively, being much less-compared to 132. 0 + 5.3 and 72.5 + 54.0 micro-mho ofnormal subjects. The moisturiser increased the state of hydration and also the ...

  17. Influence of electric field, hydrostatic pressure and temperature on the electric state in a Poschl-Teller quantum well

    International Nuclear Information System (INIS)

    Hakimyfard, A.; Barseghyan, M.G.; Kirakosyan, A.A.; Duque, C.A.

    2010-01-01

    Influence of the electric field and hydrostatic pressure on the electronic states in a Poschl-Teller quantum well is studied. In the framework of variational method the dependences of the ground state energy on the electric field and hydrostatic pressure are calculated for different values of the potential parameters and the temperature. It is shown that the increase in the electric field leads to the increase in the ground state energy, while the increase in the well width leads to the strengthening of the electric field effect. The ground state energy decreases with increasing pressure and increases with increasing temperature

  18. State Electricity Commission of Victoria annual report 1983-1984

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    The State Electricity Commission of Victoria (SECV) generates, transmits and distributes electricity throughout Victoria's 228,000 square kilometres and supplies directly to 1.390 million customers. In addition, 278,500 customers are supplied by eleven municipal authorities which purchase electricity in bulk from the Commission. The Commission also has a responsibility to ensure the safe use of electricity. The Commission's mission statement is 'to provide cost effective energy and services and to act at all times in the best interests of the people of Victoria by being a responsible, adaptive, financially sound and efficient public utility'. The mission statement is the foundation for all activities and should provide the Commission with a sense of direction and unity of purpose. Corporate objectives have been developed in the following seven broad areas: customer, employee, finance, natural resources, environment, conservation and community. Each objective has been translated into a series of specific goals, the achievement of which will be monitored. Details relating to these areas of activity are detailed in this report.

  19. State-scale evaluation of renewable electricity policy: The role of renewable electricity credits and carbon taxes

    International Nuclear Information System (INIS)

    Levin, Todd; Thomas, Valerie M.; Lee, Audrey J.

    2011-01-01

    We have developed a state-scale version of the MARKAL energy optimization model, commonly used to model energy policy at the US national scale and internationally. We apply the model to address state-scale impacts of a renewable electricity standard (RES) and a carbon tax in one southeastern state, Georgia. Biomass is the lowest cost option for large-scale renewable generation in Georgia; we find that electricity can be generated from biomass co-firing at existing coal plants for a marginal cost above baseline of 0.2-2.2 cents/kWh and from dedicated biomass facilities for 3.0-5.5 cents/kWh above baseline. We evaluate the cost and amount of renewable electricity that would be produced in-state and the amount of out-of-state renewable electricity credits (RECs) that would be purchased as a function of the REC price. We find that in Georgia, a constant carbon tax to 2030 primarily promotes a shift from coal to natural gas and does not result in substantial renewable electricity generation. We also find that the option to offset a RES with renewable electricity credits would push renewable investment out-of-state. The tradeoff for keeping renewable investment in-state by not offering RECs is an approximately 1% additional increase in the levelized cost of electricity. - Research Highlights: →We examine state-scale impacts of a renewable electricity standard and a carbon tax. →Georgia has low electricity prices and bioenergy is the main renewable option. →A carbon tax of $50/tCO 2 does not significantly increase renewable generation. →Renewable electricity credits divert renewable investment to other states. →Keeping renewable electricity generation in-state increases electricity costs by 1%.

  20. A Survey Study of Institutional Review Board Thought Processes in the United States and South Korea

    Directory of Open Access Journals (Sweden)

    Si-Kyung Jung

    2012-09-01

    Full Text Available Introduction: In the last several decades, South Korea has rapidly adopted Western customs and practices. Yet, cultural differences between South Korea and the United States exist. The purpose ofthis study was to identify and characterize potential cultural differences in the Korean and US institutional review board (IRB approach to certain topics.Methods: A qualitative analysis of a 9-item survey, describing 4 research study case scenarios, sent to IRB members from the United States and South Korea. The case scenarios involved the followingissues: (1 the need for consent for retrospective chart review when research subjects receive their care after the study is conceived; (2 child assent; (3 individual versus population benefit; and (4 exception from informed consent in emergency resuscitation research. The free-text responses were analyzed and abstracted for recurrent themes.Results: Twenty-three of the 45 survey recipients completed the survey, for an overall response rate of 51%. The themes that emerged were as follows: (1 the importance of parental authority among Korean participants versus the importance of child autonomy and child assent among US participants; (2 the recognition of the rights of a proxy or surrogate who can represent an individual’s values by all participants; and (3 the importance of the community, expressed by the Korean respondents, versus individualism, expressed by US respondents.Conclusion: Whereas US participants appear to emphasize the importance of the individual and the autonomy of a child, the Korean respondents stressed the importance of parental authority andbenefiting the community, above and beyond that of the individual person. However, there was substantial overlap in the themes expressed by respondents from both countries.

  1. The Canadian Wheat Board, Socio-economic Vulnerability and the Neo-liberal State

    Directory of Open Access Journals (Sweden)

    Jane Matthews Glenn

    2015-03-01

    Full Text Available The Canadian Prairies is one of the world's largest breadbaskets. But its location in the centre of the country, far from world markets, increases farmers' vulnerability to the middle-men who ship, handle and market their grain. To protect them, the federal government set up the Canadian Wheat Board in 1935 and gave it monopoly marketing powers in 1943. However, these monopoly powers came increasingly under attack as a market-driven, neo-liberal agenda of free trade, small government, privatization and deregulation gained a hold in the 1980s in Canada, as elsewhere. In 2011, Canada's Conservative-led government adopted the controversial Marketing Freedom for Grain Farmers Act ending the Board's monopoly powers. This legislation is controversial not so much for what it does as for how it was done. This paper explores the possible effects of this on Prairie grain farmers. It compares the functioning of an 'open' (or private market with the CWB's 'controlled' market; it describes the neo-liberal challenges to the CWB's monopoly since the 1980s; and it questions the promise of 'marketing freedom' under the new Act. It concludes with a consideration of several over-arching concerns, including the state of parliamentary democracy and the rule of law in CanadaLas praderas de Canadá son uno de los graneros más grandes del mundo. Pero su ubicación en el centro del país, lejos de los mercados mundiales, aumenta la vulnerabilidad de los agricultores frente a los intermediarios, que transportan, manejan y comercian con su grano. Para protegerlos, el gobierno federal creó en 1935 el Canadian Wheat Board (CWB (Junta Canadiense del Cereal, y le otorgó el monopolio del comercio en 1943. Sin embargo, este poder se vio atacado por el avance de la agenda neoliberal de libre mercado, pequeño gobierno, privatización y desregulación que fue ganando fuerza en los años 80 en Canadá y el resto del mundo. En 2011, el gobierno conservador de Canadá adoptó la

  2. Review of operational experience with the gas-cooled Magnox reactors of the United Kingdom Central Electricity Generating Board

    International Nuclear Information System (INIS)

    Cave, L.; Clarke, A.W.

    1984-01-01

    The paper provides a review, which is mainly of a statistical nature, of 260 reactor years of operating experience which the (United Kingdom) Central Electricity Generating Board (CEGB) has obtained with its gas-cooled, graphite moderated Magnox reactors. The main emphasis in the review is on safety rather than on availability. Data are provided on the overall incidence and frequencies of faults and it is shown that the plant items which are predominantly responsible for recorded faults are the gas circulators and the turbo-alternators. Analysis of the reactor trip experience shows that the incidence of events which necessitate an automatic shutdown of the reactor has been about one per reactor year and that of other events leading to a reactor trip has not been much higher (1.4 per reactor year). As would be expected from the length of the operating experience, some relatively rare events have occurred (expected frequency 10 -2 per reactor year, or less) but on each occasion the reactor shutdown system and decay heat removal systems functioned satisfactorily. No overheating of, or damage to, the fuel occurred as a result of these rare events or of other, more frequent, faults. Analysis of the trend of failure rates has shown an improvement with time in nearly all safety-related items and external inspection of the primary coolant circuits has shown no significant deterioration with time. However, some derating of the reactors has been necessary to reduce the effects of oxidation of mild steel in CO 2 , in order to obtain optimum service lives. In spite of major differences between the systems, a comparison of the failure rates of analogous systems and plant items in PWRs and the Magnox reactors show a considerable similarity. Overall, the review of CEGB's operational experience with its Magnos reactors has shown that the frequencies of faults in systems and plant items has been satisfyingly low. (author)

  3. Electrical Control of Metallic Heavy-Metal-Ferromagnet Interfacial States

    Science.gov (United States)

    Bi, Chong; Sun, Congli; Xu, Meng; Newhouse-Illige, Ty; Voyles, Paul M.; Wang, Weigang

    2017-09-01

    Voltage-control effects provide an energy-efficient means of tailoring material properties, especially in highly integrated nanoscale devices. However, only insulating and semiconducting systems can be controlled so far. In metallic systems, there is no electric field due to electron screening effects and thus no such control effect exists. Here, we demonstrate that metallic systems can also be controlled electrically through ionic rather than electronic effects. In a Pt /Co structure, the control of the metallic Pt /Co interface can lead to unprecedented control effects on the magnetic properties of the entire structure. Consequently, the magnetization and perpendicular magnetic anisotropy of the Co layer can be independently manipulated to any desired state, the efficient spin toques can be enhanced about 3.5 times, and the switching current can be reduced about one order of magnitude. This ability to control a metallic system may be extended to control other physical phenomena.

  4. Puget Sound Area Electric Reliability Plan : Draft Environmental Impact State.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1991-09-01

    The Puget Sound Area Electric Reliability Plan Draft Environmental Impact Statement (DEIS) identifies the alternatives for solving a power system problem in the Puget Sound area. This Plan is undertaken by Bonneville Power Administration (BPA), Puget Sound Power Light, Seattle City Light, Snohomish Public Utility District No. 1 (PUD), and Tacoma Public Utilities. The Plan consists of potential actions in Puget Sound and other areas in the State of Washington. A specific need exists in the Puget Sound area for balance between east-west transmission capacity and the increasing demand to import power generated east of the Cascades. At certain times of the year, there is more demand for power than the electric system can supply in the Puget Sound area. This high demand, called peak demand, occurs during the winter months when unusually cold weather increases electricity use for heating. The existing power system can supply enough power if no emergencies occur. However, during emergencies, the system will not operate properly. As demand grows, the system becomes more strained. To meet demand, the rate of growth of demand must be reduced or the ability to serve the demand must be increased, or both. The plan to balance Puget Sound's power demand and supply has these purposes: The plan should define a set of actions that would accommodate ten years of load growth (1994--2003). Federal and State environmental quality requirements should be met. The plan should be consistent with the plans of the Northwest Power Planning Council. The plan should serve as a consensus guideline for coordinated utility action. The plan should be flexible to accommodate uncertainties and differing utility needs. The plan should balance environmental impacts and economic costs. The plan should provide electric system reliability consistent with customer expectations. 29 figs., 24 tabs.

  5. Does the United States Naval Academy Admissions Board Evaluate an Applicant's Moral Values? If So, How?

    National Research Council Canada - National Science Library

    Clemans, Craig C

    2005-01-01

    .... This study explored that assumption. Through the literature review, this study examined the Admission Board's charter, each step of the admissions process and the practice used for evaluating an applicant's moral values...

  6. Boards Versus Bureaucracies: Field Grade Officer Education in the United States Army, 1946-1985

    Science.gov (United States)

    2013-05-24

    Army Officer Corps. iii ACKNOWLEDGMENTS I would like to thank my wife Amanda and kids Sidney Ruth, Edward Elijah, Kendall Leanne, and Gage...days a week, in order to coincide with basic pedagogical principles.31 This recommendation was a realization by the board, after consulting...4–5. While the board does site “basic pedagogical principles” and “Education specialists” in discussing the need to take class length and duration

  7. Evaluation of American Board of Orthodontics certification protocols in postgraduate orthodontic programs in the United States and Canada.

    Science.gov (United States)

    Park, Jae Hyun; Putrus, Raphael R; Pruzansky, Dawn P; Grubb, John

    2017-03-01

    The objective of this study was to identify the board certification protocols that hospital and university-based postgraduate orthodontic programs have in place to prepare residents for the American Board of Orthodontics (ABO) certification examination. An electronic survey was sent to the program directors of each of the 72 postgraduate orthodontic programs in the United States and Canada. The survey consisted of 49 questions about demographics, resident case assignment protocols, and ABO examination preparation methods. The response rate was 81%. Most programs were 30 to 36 months in length (72.7%). Many residents had a case load of 51 to 75 during their first year (50.9%), with an average maximum case load of 70 to 109. There was a positive correlation with both the number of cases that first-year residents start and the length of the program (Spearman correlation coefficient = 0.379; P <0.01) when compared with maximum case load. Approximately 72% of the programs do not offer a written mock board examination; however, 72% reported offering a clinical mock board examination. ABO cases are identified within the first 6 months of most programs. About 88% of respondents believe that residents take advantage of the banking system, and that over the past 5 years ABO Initial Certification Examination applications have increased. Most program directors (89.1%) believe that their program length is sufficient for board preparation. Subjects tested in the written examination are integrated into the didactic curriculum and strengthened with ongoing literature reviews, with a passing rate over 90%. Clinical examination preparation varies, with most programs requiring a mock board examination for graduation. Total participation in both the Initial Certification Examination and banking has increased since 2010; better follow-up protocols are needed to track residents after graduation. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc

  8. Electricity Demand Forecasting Using a Functional State Space Model

    OpenAIRE

    Nagbe , Komi; Cugliari , Jairo; Jacques , Julien

    2018-01-01

    In the last past years the liberalization of the electricity supply, the increase variability of electric appliances and their use, and the need to respond to the electricity demand in the real time had made electricity demand forecasting a challenge. To this challenge, many solutions are being proposed. The electricity demand involves many sources such as economic activities, household need and weather sources. All this sources make hard electricity demand forecasting. To forecast the electr...

  9. Electrically Tunable g Factors in Quantum Dot Molecular Spin States

    Science.gov (United States)

    Doty, M. F.; Scheibner, M.; Ponomarev, I. V.; Stinaff, E. A.; Bracker, A. S.; Korenev, V. L.; Reinecke, T. L.; Gammon, D.

    2006-11-01

    We present a magnetophotoluminescence study of individual vertically stacked InAs/GaAs quantum dot pairs separated by thin tunnel barriers. As an applied electric field tunes the relative energies of the two dots, we observe a strong resonant increase or decrease in the g factors of different spin states that have molecular wave functions distributed over both quantum dots. We propose a phenomenological model for the change in g factor based on resonant changes in the amplitude of the wave function in the barrier due to the formation of bonding and antibonding orbitals.

  10. Qualitative Description of Electric Power System Future States

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, Trevor D.; Corbin, Charles D.

    2018-03-06

    The simulation and evaluation of transactive systems depends to a large extent on the context in which those efforts are performed. Assumptions regarding the composition of the electric power system, the regulatory and policy environment, the distribution of renewable and other distributed energy resources (DERs), technological advances, and consumer engagement all contribute to, and affect, the evaluation of any given transactive system, regardless of its design. It is our position that the assumptions made about the state of the future power grid will determine, to some extent, the systems ultimately deployed, and that the transactive system itself may play an important role in the evolution of the power system.

  11. Bulk energy storage increases United States electricity system emissions.

    Science.gov (United States)

    Hittinger, Eric S; Azevedo, Inês M L

    2015-03-03

    Bulk energy storage is generally considered an important contributor for the transition toward a more flexible and sustainable electricity system. Although economically valuable, storage is not fundamentally a "green" technology, leading to reductions in emissions. We model the economic and emissions effects of bulk energy storage providing an energy arbitrage service. We calculate the profits under two scenarios (perfect and imperfect information about future electricity prices), and estimate the effect of bulk storage on net emissions of CO2, SO2, and NOx for 20 eGRID subregions in the United States. We find that net system CO2 emissions resulting from storage operation are nontrivial when compared to the emissions from electricity generation, ranging from 104 to 407 kg/MWh of delivered energy depending on location, storage operation mode, and assumptions regarding carbon intensity. Net NOx emissions range from -0.16 (i.e., producing net savings) to 0.49 kg/MWh, and are generally small when compared to average generation-related emissions. Net SO2 emissions from storage operation range from -0.01 to 1.7 kg/MWh, depending on location and storage operation mode.

  12. A cross-sectional study of emergency department boarding practices in the United States.

    Science.gov (United States)

    Pitts, Stephen R; Vaughns, Frances L; Gautreau, Marc A; Cogdell, Matthew W; Meisel, Zachary

    2014-05-01

    The median emergency department (ED) boarding time for admitted patients has been a nationally reportable core measure that now also affects ED accreditation and reimbursement. However, no direct national probability samples of ED boarding data have been available to guide this policy until now. The authors studied new National Hospital Ambulatory Medical Care Survey (NHAMCS) survey items to establish baseline values, to generate hypotheses for future research, and to help improve survey quality in the future. This was a cross-sectional, multistage, stratified annual analysis of EDs and ED visits from the National Hospital Ambulatory Medical Care Survey public use files from 2007 to 2010, a total of 139,502 visit records. These data represent the only national measure of ED boarding. The main outcome of interest was boarding duration for individual patient visits. Data analyses accounted for complex sampling design. The national median boarding time was 79 minutes, with an interquartile range of 36 to 145 minutes. The prevalence of boarding for more than 2 hours among admitted patients was 32% (95% confidence interval [CI] = 30% to 35%). Average ED volume, occupancy, acuity, and hospital admission rates increased abruptly from the second to the third quartile of median boarding duration. The half of hospitals with the longest median boarding times accounted for 73% of ED visits and 79% of ED hospitalizations nationally. Thirty-nine percent of EDs (95% CI = 32% to 46%) reported never holding patients for more than 2 hours, but visit-level analysis at these EDs found that 21% of admissions did in fact stay in the ED over 2 hours. Only 19% of EDs (95% CI = 16% to 22%) used a strategy of moving admitted patients to alternative sites in the hospital during crowded times. In this national survey, ED boarding of admitted patients disproportionately affects hospitals with higher ED volumes, which also see sicker patients who wait longer to be seen, but not hospitals with

  13. Federal/State Jurisdictional Split: Implications for Emerging Electricity Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Dennis, Jeffery S. [Akin Gump Strauss Hauer & Feld LLP, Washington, DC (United States); Kelly, Suedeen G. [Akin Gump Strauss Hauer & Feld LLP, Washington, DC (United States); Nordhaus, Robert R. [Van Ness Feldman, LLP, Washington, DC (United States); Smith, Douglas W. [Van Ness Feldman, LLP, Washington, DC (United States)

    2016-12-01

    The first Administration-wide Quadrennial Energy Review (QER), released in April 2015, found that the “interacting and overlapping” division of authority between “federal, regional and state institutions and regulatory structures” for the electricity sector could “impede development of the grid of the future [and] . . . the development of markets that efficiently integrate” new and emerging technologies.1 While “technology is indifferent to state-Federal boundaries and jurisdictions,” the QER explained, “technology users cannot be.”2 The report concluded that “[b]oth Federal and state governments need to play constructive and collaborative roles in the future to ensure that consumers and industry are able to maximize the value of new technologies.”3 The QER recommended that the Department of Energy (“DOE”) facilitate such collaboration by playing a “convening role” to bring together state and federal regulators and other stakeholders to consider these issues.4 This paper provides background and analysis on these jurisdictional issues and the impact they may have on adoption of emerging energy technologies and coordination of markets for those technologies, in support of future dialogs on these subjects. In particular, this paper reviews the structure of the Federal Power Act (“FPA”),5 and compares the division of authority between the federal and state governments adopted there with other federal energy and energy-related statutes.

  14. The Manitoba Hydro-Electric Board, 43nd annual report for the year ended March 31, 1994

    International Nuclear Information System (INIS)

    1994-01-01

    Manitoba Hydro is a provincially owned corporation that produces electricity for distribution to 380,270 customers throughout all of Manitoba except for central Winnipeg. The utility operates 12 hydraulic generating stations, 2 thermal generating stations and 12 diesel sites. In the year ending March 31, 1994, total combined generation and imports were 27.6 billion kWh, of which 95.2% was produced from hydraulic stations. Power sales to Manitoba customers totalled 15 billion kWh and extraprovincial sales totalled 9.16 billion kWh. Gross revenues were $924.8 million and total expenses were $855.3 million, for a net income of $69.5 million. Total out-of-province sales reached a record high of $231.6 million, or 62.3% more than in 1992/93. That increase was mainly due to a 500-MW firm power sale to Northern States Power. The various sections of the report present information on customer services; employee relations; environmental management; resource planning; electricity generated, purchased, and exported; system development, including construction of new transmission lines and stations; research and development; and safety. Financial statements are included. 25 figs., 5 tabs

  15. Fractional Stark state selective electric field ionization of very high-n Rydberg states of molecules

    International Nuclear Information System (INIS)

    Dietrich, H.; Mueller-Dethlefs, K.; Baranov, L.Y.

    1996-01-01

    For the first time fractional Stark state selective electric field ionization of very high-n (n approx-gt 250) molecular Rydberg states is observed. An open-quote open-quote offset close-quote close-quote electric pulse selectively ionizes the more fragile open-quote open-quote red close-quote close-quote (down shifted in energy) Stark states. The more resilient open-quote open-quote bluer close-quote close-quote, or up-shifted, ones survive and are shifted down in energy upon application of a second (open-quote open-quote probe close-quote close-quote) pulse of opposite direction (diabatic Stark states close-quote inversion). Hence, even for smaller probe than offset fields ionization is observed. The offset/probe ratio allows one to control spectral peak shapes in zero-kinetic-energy photoelectron spectroscopy. copyright 1995 The American Physical Society

  16. IE Information Notice No. 85-18, Supplement 1: Failures of undervoltage output circuit boards in the Westinghouse-designed solid state protection system

    International Nuclear Information System (INIS)

    Rossi, C.E.

    1992-01-01

    The US Nuclear Regulatory Commission (NRC) is issuing this information notice supplement to alert addressees to continuing problems associated with the undervoltage (UV) output circuit boards (driver cards) in the solid state protection system (SSPS) designed by the Westinghouse Electric Corporation (Westinghouse). On June 3, 1991, the Shearon Harris Nuclear Power Plant, Unit 1, (Harris) experienced an automatic reactor trip from 100 percent power on a spurious low reactor coolant system loop flow signal. The signal was generated as a result of a surveillance test being performed on one of three loop flow transmitters. The licensee attributed the spurious signal to both procedural inadequacies and personnel error. A control room operator verified that all control rods had fully inserted following the trip signal and that reactor power was properly decreasing. However, about 22 seconds after the automatic trip signal was generated, operators discovered that the ''A'' reactor trip breaker (RTB) had not opened. The RTB was manually opened using the reactor trip switch on the main control board. Subsequent analyses are discussed

  17. State Electricity Regulatory Policy and Distributed Resources: Distributed Resources and Electric System Reliability

    Energy Technology Data Exchange (ETDEWEB)

    Cowart, R.; Harrington, C.; Moskovitz, D.; Shirley, W.; Weston, F.; Sedano, R.

    2002-10-01

    Designing and implementing credit-based pilot programs for distributed resources distribution is a low-cost, low-risk opportunity to find out how these resources can help defer or avoid costly electric power system (utility grid) distribution upgrades. This report describes implementation options for deaveraged distribution credits and distributed resource development zones. Developing workable programs implementing these policies can dramatically increase the deployment of distributed resources in ways that benefit distributed resource vendors, users, and distribution utilities. This report is one in the State Electricity Regulatory Policy and Distributed Resources series developed under contract to NREL (see Annual Technical Status Report of the Regulatory Assistance Project: September 2000-September 2001, NREL/SR-560-32733). Other titles in this series are: (1) Accommodating Distributed Resources in Wholesale Markets, NREL/SR-560-32497; (2) Distributed Resources and Electric System Re liability, NREL/SR-560-32498; (3) Distribution System Cost Methodologies for Distributed Generation, NREL/SR-560-32500; (4) Distribution System Cost Methodologies for Distributed Generation Appendices, NREL/SR-560-32501.

  18. United States Nuclear Regulatory Commission Staff Practice and Procedure Digest: Commission, Appeal Board and Licensing Board decisions, July 1972--March 1992

    International Nuclear Information System (INIS)

    1993-02-01

    This 5th revision of the sixth edition of the NRC Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period of July 1, 1972 to March 31, 1992, interpreting the NRC's Rules of Practice in 10 CFR Part 2

  19. United States Nuclear Regulatory Commission staff practice and procedure digest: Commission, Appeal Board and Licensing Board decisions, July 1972--December 1991

    International Nuclear Information System (INIS)

    1992-11-01

    This 4th revision of the sixth edition of the NRC Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period of July 1, 1972 to December 31, 1991, interpreting the NRC's Rules of Practice in 10 CFR Part 2

  20. Elementary Assessment Handbook; a self-assessment handbook for compliance with the laws relating to elementary school boards of trustees and the state board of education policies for the general operation of a school district.

    Science.gov (United States)

    Arizona State Dept. of Education, Phoenix.

    As an alternative to assessments conducted by the State Department of Education, Arizona school districts can use this handbook for self evaluation of their compliance with school law, which is basically controlled by Arizona Revised Statute (ARS) Title 15 and State Board of Education policy. This handbook is divided into seven parts which…

  1. Factors associated with high-severity disciplinary action by a state medical board: a Texas study of medical license revocation.

    Science.gov (United States)

    Cardarelli, Roberto; Licciardone, John C

    2006-03-01

    There has been an increase in research evaluating factors associated with disciplinary action of physicians by state medical boards. However, factors related to the severity of disciplinary action are lacking. By investigating these factors while controlling for the type of violation, the authors sought to determine whether physician characteristics influenced the process of disciplinary action by state medical boards. Physicians disciplined by the Texas Medical Board between January 1, 1989, and December 31, 1998, were included in this case-controlled study (N=1129). Multivariate logistic regression analysis was used to compute odds ratios (ORs) and 95% confidence intervals (CIs) for factors associated with license revocation, the most severe disciplinary action, compared with all other forms of disciplinary action combined. Anesthesiologists (OR, 2.45; 95% CI, 1.05-5.74), general practitioners (OR, 1.80; 95% CI, 1.01-3.19), and psychiatrists (OR, 2.68; 95% CI, 1.41-5.13), as well as those with multiple disciplinary actions (OR, 1.91; 95% CI, 1.29-2.83) were most susceptible to license revocation. The more years a disciplined physician was in practice, the greater risk he or she had of license revocation (OR, 1.05; 95% CI, 1.04-1.07). Factors associated with a greater likelihood of license revocation for physicians are: primary medical specialty, number of years in practice, and a history of multiple disciplinary actions.

  2. Efficiency evaluation of the state owned electric utilities in India

    International Nuclear Information System (INIS)

    Thakur, Tripta; Deshmukh, S.G.; Kaushik, S.C.

    2006-01-01

    This paper presents a framework for accessing comparative efficiencies of Indian State Owned Electric Utilities (SOEU), which have been mainly responsible for the generation, distribution and transmission of electricity in India. Performance of 26 utilities was evaluated using the non-parametric technique of Data Envelopment Analysis (DEA), and the impact of scale on the efficiency scores was also evaluated. The results indicate that the performance of several SOEUs is sub-optimal, suggesting the potential for significant cost reductions. Separate benchmarks were derived for possible reductions in employees' number, and the results indicate that several utilities deploy a much larger number of employees than that required by a best practice utility, and significant savings are possible on this account. It was also found that the bigger utilities display greater inefficiencies and have distinct scale inefficiencies. Exploiting scale efficiencies by suitable restructuring and unbundling of SOEUs are therefore crucial measures that may foster efficiencies in the SOEUs. The paper discusses these results in the context of related policy issues

  3. State-level electricity demand forecasting model. [For 1980, 1985, 1990

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, H. D.

    1978-01-01

    This note briefly describes the Oak Ridge National Laboratory (ORNL) state-level electricity demand (SLED) forecasting model developed for the Nuclear Regulatory Commission. Specifically, the note presents (1) the special features of the model, (2) the methodology used to forecast electricity demand, and (3) forecasts of electricity demand and average price by sector for 15 states for 1980, 1985, 1990.

  4. State Performance-Based Regulation Using Multiyear Rate Plans for U.S. Electric Utilities

    Energy Technology Data Exchange (ETDEWEB)

    Lowry, Mark Newton [Pacific Economics Group Research LLC (United States); Makos, Matt [Pacific Economics Group Research LLC (United States); Deason, Jeff [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schwartz, Lisa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-07-31

    Electric utilities today must contain costs at a time when many need to modernize aging systems and all face major changes in technologies, customer preferences and competitive pressures.Most U.S. electric utility facilities are investor-owned, subject to rate and service regulation by state public utility commissions. Regulatory systems under which these utilities operate affect their performance and ability to meet these challenges. In this business environment, multiyear rate plans have some advantages over traditional rate regulation.The report focuses on key design issues and provides case studies of the multiyear rate plan approach, applicable to both vertically integrated and restructured states. Mark Newton Lowry and Matt Makos of Pacific Energy Group Research and Jeff Deason of Berkeley Lab authored the report; Lisa Schwartz, Berkeley Lab, was project manager and technical editor.The report is aimed primarily at state utility regulators and stakeholders in the state regulatory process. The multiyear rate approach also provides ideas on how to streamline oversight of public power utilities and rural electric cooperatives for their governing boards.Two key provisions of multiyear rate plans strengthen cost containment incentives and streamline regulation: 1. Reducing frequency of rate cases, typically to every four or five years 2. Using an attrition relief mechanism to escalate rates or revenue between rate cases to address cost pressures such as inflation and growth in number of customers, independently of the utility’s own cost Better utility performance can be achieved under well-designed multiyear rate plans while achieving lower regulatory costs. Benefits can be shared between utilities and their customers. But plans can be complex and involve significant changes in the regulatory system. Designing plans that stimulate utility performance without undue risk and share benefits fairly can be challenging.This report discusses the rationale for multiyear

  5. United States Department of Energy Environmental Management Advisory Board: Public meeting

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-15

    This meeting of the Environmental Management Advisory Board was held to discuss environmental concerns that everybody has and to provide a strategy for dealing with the problems. Plans for the Environmental Management Programmatic Environmental Impact Statement are presented. A report is included of the subcommittee on institutional barriers to advanced technology use. The subcommittee on environmental restoration cost effectiveness also presents a report. The status of public involvement activities is evaluated. A presentation on the status of spent fuel management is included.

  6. RESTRUCTURED ELECTRICITY MARKETS: Three States' Experiences in Adding Generating Capacity

    National Research Council Canada - National Science Library

    2002-01-01

    ...., restructured electricity markets by shifting from service provided through a regulated monopoly-the local electric utility-to service provided through open competition among the local utility and its competitors...

  7. United State Nuclear Regulatory Commission staff practice and procedure digest: Commission, Appeal Board, and Licensing Board decisions, July 1972--June 1988

    International Nuclear Information System (INIS)

    1989-04-01

    This fifth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to June 30, 1988 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This edition replaces in their entirety earlier editions and supplements and includes appropriate changes reflecting the amendments to the Rules of Practice effective through June 30, 1988

  8. United States Nuclear Regulatory Commission staff practice and procedure digest. Commission, Appearl Board and Licensing Board decisions, July 1972-June 1985. Digest No. 4

    International Nuclear Information System (INIS)

    1986-01-01

    This edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period July 1, 1972 to June 30, 1985 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This edition replaces earlier editions and supplements and includes appropriate changes reflecting the amendment to the Rules of Practice effective June 30, 1985

  9. The use of office-based sedation and general anesthesia by board certified pediatric dentists practicing in the United States.

    Science.gov (United States)

    Olabi, Nassim F; Jones, James E; Saxen, Mark A; Sanders, Brian J; Walker, Laquia A; Weddell, James A; Schrader, Stuart M; Tomlin, Angela M

    2012-01-01

    The purpose of this study is to explore the use of office-based sedation by board-certified pediatric dentists practicing in the United States. Pediatric dentists have traditionally relied upon self-administered sedation techniques to provide office-based sedation. The use of dentist anesthesiologists to provide office-based sedation is an emerging trend. This study examines and compares these two models of office-based sedations. A survey evaluating office-based sedation of diplomates of the American Board of Pediatric Dentistry (ABPD) based on gender, age, years in practice, practice types, regions, and years as a diplomate of the ABPD was completed by 494 active members. The results were summarized using frequencies and percentages. Relationships of dentist age, gender, and number of years in practice with the use of intravenous (IV) sedation was completed using two-way contingency tables and Mantel-Haenszel tests for ordered categorical data. Relationships of office-based sedation use and the type of one's practice were examined using Pearson chi-square tests. Of the 1917 surveys e-mailed, 494 completed the survey for a response rate of 26%. Over 70% of board-certified US pediatric dentists use some form of sedation in their offices. Less than 20% administer IV sedation, 20 to 40% use a dentist anesthesiologist, and 60 to 70% would use dentist anesthesiologists if one were available.

  10. A high dynamic range data acquisition system for a solid-state electron electric dipole moment experiment

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Kunkler, Brandon; Liu, Chen-Yu; Visser, Gerard [CEEM, Physics Department, Indiana University, Bloomington, Indiana 47408 (United States)

    2012-01-15

    We have built a high precision (24-bit) data acquisition (DAQ) system capable of simultaneously sampling eight input channels for the measurement of the electric dipole moment of the electron. The DAQ system consists of two main components: a master board for DAQ control and eight individual analog-to-digital converter (ADC) boards for signal processing. This custom DAQ system provides galvanic isolation of the ADC boards from each other and the master board using fiber optic communication to reduce the possibility of ground loop pickup and attain ultimate low levels of channel cross-talk. In this paper, we describe the implementation of the DAQ system and scrutinize its performance.

  11. Submission to the Ontario Energy Board regarding the review of further efficiencies in the electricity distribution sector

    International Nuclear Information System (INIS)

    Silano, B.E.; Boodhoo, D.; Shelton, A.

    2004-02-01

    This report presents the views of the Ontario Division of the Canadian Union of Public Employees (CUPE) on the Ontario Energy Board's consideration to promote further efficiencies in the power distribution sector. CUPE claims that efficiencies aimed at lowering costs through amalgamations often lead to increased costs, degradation in services and decreased reliability of power distribution. CUPE also argues that the main concerns of Ontario ratepayers is reliability and the threat of increased prices. CUPE recommends that the Ontario Energy Board hold open consultations with ratepayers, who are in fact shareholders in their local utilities. This report reviewed the current regulatory regime known as Performance Based Regulation and its effect on local distribution utilities. It also reviewed the impacts of mergers, amalgamations, acquisitions and divestitures (MAAD), with particular reference to rates, privatization of utility services, service degradation and job losses

  12. Creating the Future: A 2020 Vision and Plan for Library Service in New York State. Recommendations of the New York State Regents Advisory Council on Libraries to the New York State Board of Regents

    Science.gov (United States)

    New York State Education Department, 2016

    2016-01-01

    In April 2010, the New York State Board of Regents challenged the library community to rethink the State's vast array of library services to ensure that they are aligned with modern expectations and the expanded functions needed in today's society, operate with improved efficiency, and are prepared for the future as an essential and vibrant part…

  13. Prospects for renewable electricity in the new EU Member States

    International Nuclear Information System (INIS)

    Uyterlinde, M.A.; De Vries, H.J.; Barbu, A.D.

    2006-02-01

    The scope of this paper is to provide a brief overview of the overall context in which investments in RES-E will take place in short to medium term in the New Member States (NMS) of the EU and to present some preliminary results of a quantitative analysis on the potentials for various RES-E technologies to be deployed in the region in short to medium term as well as their cost. The main findings of this research suggest that factors likely to influence any future, large-scale deployment of RES-E technologies in the NMS include the choice of market strategy by the NMS governments and the energy business community in the European energy market, the ability to elaborate sound local energy plans integrated into a wider context for regional development, the investment climate and the degree to which new renewable ventures can contribute to creating new employment. With respect to the potential for RES-E electricity generation in the NMS, preliminary model results suggest that within the period 2005-2010, the NMS could provide a substantial contribution to the European commitments to increase the share of renewable energy sources in the fuel mix. While biomass and hydro (large and small) seem to be readily deployable in the region, other technologies can make it to the market too

  14. Brain electrical activity and subjective experience during altered states of consciousness: ganzfeld and hypnagogic states.

    Science.gov (United States)

    Wackermann, Jiri; Pütz, Peter; Büchi, Simone; Strauch, Inge; Lehmann, Dietrich

    2002-11-01

    Manifestations of experimentally induced altered states of consciousness in the brain's electrical activity as well as in subjective experience were explored via the hypnagogic state at sleep onset, and the state induced by exposure to an unstructured perceptual field (ganzfeld). Twelve female paid volunteers participated in sessions involving sleep onset, ganzfeld, and eyes-closed relaxed waking, and were repeatedly prompted for recall of their momentary mentation, according to a predefined schedule. Nineteen channel EEG, two channels EOG and EMG were recorded simultaneously. The mentation reports were followed by the subjects' ratings of their experience on a number of ordinal scales. Two-hundred and forty-one mentation reports were collected. EEG epochs immediately preceding the mentation reports were FFT-analysed and the spectra compared between states. The ganzfeld EEG spectrum, showing no signs of decreased vigilance, was very similar to the EEG spectrum of waking states, even showed a minor acceleration of alpha activity. The subjective experience data were reduced to four principal components: Factor I represented the subjective vigilance dimension, as confirmed by correlations with EEG spectral indices. Only Factor IV, the 'absorption' dimension, differentiated between the ganzfeld state (more absorption) and other states. In waking states and in ganzfeld, the subjects estimated elapsed time periods significantly shorter than in states at sleep onset. The results did not support the assumption of a hypnagogic nature of the ganzfeld imagery. Dream-like imagery can occur in various global functional states of the brain; hypnagogic and ganzfeld-induced states should be conceived as special cases of a broader class of 'hypnagoid' phenomena.

  15. United States Nuclear Regulatory Commission Staff Practice and Procedure Digest. Commission, Appeal Board and Licensing Board decisions, July 1972-December 1985. Digest No. 4, Revision No. 2

    International Nuclear Information System (INIS)

    1986-08-01

    This Revision 2 of the fourth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period July 1, 1972 to December 31, 1985, interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 2 replaces in part earlier editions and supplements and includes appropriate changes reflecting the amendment to the Rules of Practice effective December 31, 1985. Topics covered include prehearing and posthearing matters, herings, appeals, and general matters

  16. United States Nuclear Regulatory Commission Staff Practice and Procedure Digest: Commission, Appeal Board and Licensing Board decisions, July 1972-December 1986

    International Nuclear Information System (INIS)

    1987-11-01

    This Revision 6 of the fourth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to December 31, 1986, interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 6 replaces in part earlier editions and supplements and includes appropriate changes reflecting the amendments to the Rules of Practice effective through December 31, 1986

  17. United States Nuclear Regulatory Commission staff practice and procedure digest: Commission, Appeal Board, and Licensing Board decisions issued from July 1, 1972 through March 31, 1986

    International Nuclear Information System (INIS)

    1986-10-01

    A digest is given of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to March 31, 1986, interpreting the NRC's Rules of Practice. Parts of earlier editions and supplements are replaced, and amendments to the Rules of Practice effective through March 31, 1986 are reflected. The material included deals with applications, prehearing matters, hearings, post-hearing matters, appeals, and decisions related to general matters. Decisions are indexed by facility, citation, CFR, statutes, case law, and other legal citations

  18. United States Nuclear Regulatory Commission staff practice and procedure digest: Commission, Appeal Board and Licensing Board decisions, July 1972--December 1989

    International Nuclear Information System (INIS)

    1990-06-01

    This Revision 6 of the fifth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to December 31, 1989 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 6 replaces in part earlier editions and revisions and includes appropriate changes reflecting the amendments to the Rules of Practice effective through December 31, 1989

  19. United States Nuclear Regulatory Commission Staff practice and procedure digest: Commission, Appeal Board and Licensing Board Decisions, July 1972-March 1987

    International Nuclear Information System (INIS)

    1987-12-01

    This Revision 7 of the fourth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to March 31, 1987 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 7 replaces in part earlier editions and supplements and includes appropriate changes reflecting the amendments to the Rules of Practice effective through March 31, 1987

  20. United States Nuclear Regulatory Commission staff practice and procedure digest: Commission, Appeal Board and Licensing Board decisions, July 1972--September 1988

    International Nuclear Information System (INIS)

    1989-04-01

    This Revision 1 of the fifth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to September 30, 1988 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 1 replaces in part earlier editions and supplements and includes appropriate changes reflecting the amendments to the Rules of Practice effective through September 30, 1988

  1. United States Nuclear Regulatory Commission staff practice and procedure digest. Commission, Appeal Board and Licensing Board decisions, July 1972-September 1985. Digest No. 4, Revision No. 1

    International Nuclear Information System (INIS)

    1986-04-01

    This Revision 1 of the fourth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to September 30, 1985 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 1 replaces earlier editions and supplements and includes appropriate changes reflecting the admendments to the Rules of Practice effective through September 20, 1985

  2. Electric-field-induced flow-aligning state in a nematic liquid crystal.

    Science.gov (United States)

    Fatriansyah, Jaka Fajar; Orihara, Hiroshi

    2015-04-01

    The response of shear stress to a weak ac electric field as a probe is measured in a nematic liquid crystal under shear flow and dc electric fields. Two states with different responses are clearly observed when the dc electric field is changed at a constant shear rate: the flow aligning and non-flow aligning states. The director lies in the shear plane in the flow aligning state and out of the plane in the non-flow aligning state. Through application of dc electric field, the non-flow aligning state can be changed to the flow aligning state. In the transition from the flow aligning state to the non-flow aligning state, it is found that the response increases and the relaxation time becomes longer. Here, the experimental results in the flow aligning state are discussed on the basis of the Ericksen-Leslie theory.

  3. Comparison of nuclear electric resonance and nuclear magnetic resonance in integer and fractional quantum Hall states

    International Nuclear Information System (INIS)

    Tomimatsu, Toru; Shirai, Shota; Hashimoto, Katsushi; Sato, Ken; Hirayama, Yoshiro

    2015-01-01

    Electric-field-induced nuclear resonance (NER: nuclear electric resonance) involving quantum Hall states (QHSs) was studied at various filling factors by exploiting changes in nuclear spins polarized at quantum Hall breakdown. Distinct from the magnetic dipole interaction in nuclear magnetic resonance, the interaction of the electric-field gradient with the electric quadrupole moment plays the dominant role in the NER mechanism. The magnitude of the NER signal strongly depends on whether electronic states are localized or extended. This indicates that NER is sensitive to the screening capability of the electric field associated with QHSs

  4. Highway vehicle electric drive in the United States : 2009 status and issues.

    Energy Technology Data Exchange (ETDEWEB)

    Santini, D. J.; Energy Systems

    2011-02-16

    The status of electric drive technology in the United States as of early 2010 is documented. Rapidly evolving electric drive technologies discussed include hybrid electric vehicles, multiple types of plug-in hybrid electric vehicles, and battery electric vehicles. Recent trends for hybrids are quantified. Various plug-in vehicles entering the market in the near term are examined. The technical and economic requirements for electric drive to more broadly succeed in a wider range of highway vehicle applications are described, and implications for the most promising new markets are provided. Federal and selected state government policy measures promoting and preparing for electric drive are discussed. Taking these into account, judgment on areas where increased Clean Cities funds might be most productively focused over the next five years are provided. In closing, the request by Clean Cities for opinion on the broad range of research needs providing near-term support to electric drive is fulfilled.

  5. Study on electric parameters of wild and cultivated cotton forms being in normal state and irradiated

    International Nuclear Information System (INIS)

    Nazirov, N.N.; Kamalov, N.; Norbaev, N.

    1978-01-01

    The radiation effect on electric conductivity of tissues in case of alternating current, electrical capacity and cell impedance has been studied. Gamma irradiation of seedlings results in definite changes of electric factors of cells (electric conductivity, electric capacity, impedance). It is shown that especially strong changes have been revealed during gamma irradiation of radiosensitive wild form of cotton plants. The deviation of cell electric factors from the standard depends on the violation of evolutionally composed ion heterogeneity and cell colloid system state, which results in changes in their structure and metabolism in them

  6. Management report 2001 of COPEL - Electrical Company of Parana State, Brazil

    International Nuclear Information System (INIS)

    Anon

    2000-01-01

    The COPEL - Electrical Company of Parana State, Brazil - management report of calendar year of 2000 is presented, covering the following topics: COPEL - standing for much more than energy; extending the benefits of electricity to everyone in Parana state, Brazil; protecting and recovering the environment; philanthropy and volunteer work; education; social integration; support to cultural expression and gratitude

  7. Social balance sheet 2000 of COPEL - Electrical Company of Parana State, Brazil

    International Nuclear Information System (INIS)

    Anon

    2000-01-01

    The COPEL - Electrical Company of Parana State, Brazil social balance report of calendar year of 2000 is presented, covering the following topics: COPEL - standing for much more than energy; extending the benefits of electricity to everyone in Parana state, Brazil; protecting and recovering the environment; philanthropy and volunteer work; education; social integration; support to cultural expression and gratitude

  8. 34 CFR 403.11 - What are the principal responsibilities of the State board?

    Science.gov (United States)

    2010-07-01

    ... (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED... other appropriate agencies, groups, and individuals, including business, industry, and labor, involved...

  9. Impacts of rising air temperatures on electric transmission ampacity and peak electricity load in the United States

    Science.gov (United States)

    Bartos, Matthew; Chester, Mikhail; Johnson, Nathan; Gorman, Brandon; Eisenberg, Daniel; Linkov, Igor; Bates, Matthew

    2016-11-01

    Climate change may constrain future electricity supply adequacy by reducing electric transmission capacity and increasing electricity demand. The carrying capacity of electric power cables decreases as ambient air temperatures rise; similarly, during the summer peak period, electricity loads typically increase with hotter air temperatures due to increased air conditioning usage. As atmospheric carbon concentrations increase, higher ambient air temperatures may strain power infrastructure by simultaneously reducing transmission capacity and increasing peak electricity load. We estimate the impacts of rising ambient air temperatures on electric transmission ampacity and peak per-capita electricity load for 121 planning areas in the United States using downscaled global climate model projections. Together, these planning areas account for roughly 80% of current peak summertime load. We estimate climate-attributable capacity reductions to transmission lines by constructing thermal models of representative conductors, then forcing these models with future temperature projections to determine the percent change in rated ampacity. Next, we assess the impact of climate change on electricity load by using historical relationships between ambient temperature and utility-scale summertime peak load to estimate the extent to which climate change will incur additional peak load increases. We find that by mid-century (2040-2060), increases in ambient air temperature may reduce average summertime transmission capacity by 1.9%-5.8% relative to the 1990-2010 reference period. At the same time, peak per-capita summertime loads may rise by 4.2%-15% on average due to increases in ambient air temperature. In the absence of energy efficiency gains, demand-side management programs and transmission infrastructure upgrades, these load increases have the potential to upset current assumptions about future electricity supply adequacy.

  10. Geo-electric measurements – internal state of historic masonry

    OpenAIRE

    Schueremans, Luc

    2009-01-01

    A geophysical resistivity measuring device was modified to perform automatic monitoring of historical masonry structures before, during and after grout injection for consolidation purposes. The obtained image is called a geo-electrical tomography. The technique was used to evaluate the deteriorated masonry of the recently partly collapsed Maagdentoren in Zichem,(B). Geo-electric measuring techniques have been adapted from application in geology to be used as a non-destructive technique for t...

  11. 77 FR 8809 - United States Travel and Tourism Advisory Board; Teleconference Meeting

    Science.gov (United States)

    2012-02-15

    ... DEPARTMENT OF COMMERCE International Trade Administration United States Travel and Tourism... Commerce. ACTION: Notice of an open teleconference meeting. SUMMARY: The United States Travel and Tourism... National Travel and Tourism Strategy (Strategy). The Executive Order was issued by President Barack Obama...

  12. 34 CFR 403.12 - What are the additional responsibilities of the State board?

    Science.gov (United States)

    2010-07-01

    ... (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED... each private industry council established within the State under section 102 of the JTPA a current.... Their membership must be composed of representatives of— (i) Employers from any relevant industry or...

  13. United States Nuclear Regulatory Commission staff practice and procedure digest: Commission, Appeal Board and Licensing Board decisions, July 1972--December 1987

    International Nuclear Information System (INIS)

    1988-11-01

    This Revision 10 of the fourth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and licensing Board decisions issued during the period from July 1, 1972 to December 31, 1987 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 10 replaces in part earlier editions and supplements and includes appropriate changes reflecting the amendments to the Rules of Practice effective through December 31, 1987. The Digest is roughly structured in accordance with the chronological sequence of the nuclear facility licensing process as set forth in Appendix A to 10 CFR Part 2. Those decisions which did not fit into that structure are dealt with in a section on ''general matters.'' Where appropriate, particular decisions are indexed under more than one heading. Some topical headings contain no decision citations or discussion

  14. On-board adaptive model for state of charge estimation of lithium-ion batteries based on Kalman filter with proportional integral-based error adjustment

    Science.gov (United States)

    Wei, Jingwen; Dong, Guangzhong; Chen, Zonghai

    2017-10-01

    With the rapid development of battery-powered electric vehicles, the lithium-ion battery plays a critical role in the reliability of vehicle system. In order to provide timely management and protection for battery systems, it is necessary to develop a reliable battery model and accurate battery parameters estimation to describe battery dynamic behaviors. Therefore, this paper focuses on an on-board adaptive model for state-of-charge (SOC) estimation of lithium-ion batteries. Firstly, a first-order equivalent circuit battery model is employed to describe battery dynamic characteristics. Then, the recursive least square algorithm and the off-line identification method are used to provide good initial values of model parameters to ensure filter stability and reduce the convergence time. Thirdly, an extended-Kalman-filter (EKF) is applied to on-line estimate battery SOC and model parameters. Considering that the EKF is essentially a first-order Taylor approximation of battery model, which contains inevitable model errors, thus, a proportional integral-based error adjustment technique is employed to improve the performance of EKF method and correct model parameters. Finally, the experimental results on lithium-ion batteries indicate that the proposed EKF with proportional integral-based error adjustment method can provide robust and accurate battery model and on-line parameter estimation.

  15. Sale of electric energy: the case of Electric Power Company of Santa Catarina State (CELESC)

    International Nuclear Information System (INIS)

    Aurich, D.S.

    1990-01-01

    An electric power system assuring the electric supply to the investor client was developed by CELESC, linking the sale resources to one generation construction. It was related the cost of enlargement work from Pery plant, with the participation of Manville Forest Products in the investments. The economic aspects of this contract are presented, including the supply assure, the costs and the advantage each company will receive. (C.G.C.)

  16. A Survey of State Boards of Optometry Concerning Educational Requirements in Pharmacology.

    Science.gov (United States)

    Lesher, Gary A.

    1986-01-01

    Results of a survey of state optometry licensing requirements for coursework in pharmacology, intended as a tool for optometry curriculum development, suggest a need for training in pharmacology in both the college curriculum and continuing education. (MSE)

  17. Electric-field enhanced performance in catalysis and solid-state devices involving gases

    Science.gov (United States)

    Blackburn, Bryan M.; Wachsman, Eric D.; Van Assche, IV, Frederick Martin

    2015-05-19

    Electrode configurations for electric-field enhanced performance in catalysis and solid-state devices involving gases are provided. According to an embodiment, electric-field electrodes can be incorporated in devices such as gas sensors and fuel cells to shape an electric field provided with respect to sensing electrodes for the gas sensors and surfaces of the fuel cells. The shaped electric fields can alter surface dynamics, system thermodynamics, reaction kinetics, and adsorption/desorption processes. In one embodiment, ring-shaped electric-field electrodes can be provided around sensing electrodes of a planar gas sensor.

  18. Electric power industry deregulation in the United States: impacts on U.S. and Canadian markets

    Energy Technology Data Exchange (ETDEWEB)

    Hall, G.R. [Putnam, Hayes and Bartlett, Inc., Cambridge, MA (United States)

    1996-10-01

    An overview of the restructuring and deregulation of the United States electric power industry and the implications for the North American natural gas industry was presented. Electric power restructuring and its effect on wholesale and retail competition was discussed. It was suggested that although in the short term electric power deregulation impacts negatively on the natural gas industry, the long term impacts are favourable. The short term impact on the natural gas industry will mean increased competition and downward pressure on gas prices. In contrast, the long term impact could mean increased reliance on gas for electric power generation and convergence of the electric power and natural gas industries.

  19. Coherent and Semiclassical States of a Charged Particle in a Constant Electric Field

    Science.gov (United States)

    Adorno, T. C.; Pereira, A. S.

    2018-05-01

    The method of integrals of motion is used to construct families of generalized coherent states of a nonrelativistic spinless charged particle in a constant electric field. Families of states, differing in the values of their standard deviations at the initial time, are obtained. Depending on the initial values of the standard deviations, and also on the electric field, it turns out to be possible to identify some families with semiclassical states.

  20. Electrically tunable solid-state silicon nanopore ion filter

    Directory of Open Access Journals (Sweden)

    Gracheva Maria

    2006-01-01

    Full Text Available AbstractWe show that a nanopore in a silicon membrane connected to a voltage source can be used as an electrically tunable ion filter. By applying a voltage between the heavily doped semiconductor and the electrolyte, it is possible to invert the ion population inside the nanopore and vary the conductance for both cations and anions in order to achieve selective conduction of ions even in the presence of significant surface charges in the membrane. Our model based on the solution of the Poisson equation and linear transport theory indicates that in narrow nanopores substantial gain can be achieved by controlling electrically the width of the charge double layer.

  1. Preparation of hierarchical porous carbon from waste printed circuit boards for high performance electric double-layer capacitors

    Science.gov (United States)

    Du, Xuan; Wang, Li; Zhao, Wei; Wang, Yi; Qi, Tao; Li, Chang Ming

    2016-08-01

    Renewable clean energy and resources recycling have become inevitable choices to solve worldwide energy shortages and environmental pollution problems. It is a great challenge to recycle tons of waste printed circuit boards (PCB) produced every year for clean environment while creating values. In this work, low cost, high quality activated carbons (ACs) were synthesized from non-metallic fractions (NMF) of waste PCB to offer a great potential for applications of electrochemical double-layer capacitors (EDLCs). After recovering metal from waste PCB, hierarchical porous carbons were produced from NMF by carbonization and activation processes. The experimental results exhibit that some pores were formed after carbonization due to the escape of impurity atoms introduced by additives in NMF. Then the pore structure was further tailored by adjusting the activation parameters. Roles of micropores and non-micropores in charge storage were investigated when the hierarchical porous carbons were applied as electrode of EDLCs. The highest specific capacitance of 210 F g-1 (at 50 mA g-1) and excellent rate capability were achieved when the ACs possessing a proper micropores/non-micropores ratio. This work not only provides a promising method to recycle PCB, but also investigates the structure tailoring arts for a rational hierarchical porous structure in energy storage/conversion.

  2. Optimizing the operating parameters of corona electrostatic separation for recycling waste scraped printed circuit boards by computer simulation of electric field.

    Science.gov (United States)

    Li, Jia; Lu, Hongzhou; Liu, Shushu; Xu, Zhenming

    2008-05-01

    The printed circuit board (PCB) has a metal content of nearly 28% metal, including an abundance of nonferrous metals such as copper, lead, and tin. The purity of precious metals in PCBs is more than 10 times that of rich-content minerals. Therefore, the recycling of PCBs is an important subject, not only from the viewpoint of waste treatment, but also with respect to the recovery of valuable materials. Compared with traditional process the corona electrostatic separation (CES) had no waste water or gas during the process and it had high productivity with a low-energy cost. In this paper, the roll-type corona electrostatic separator was used to separate metals and nonmetals from scraped waste PCBs. The software MATLAB was used to simulate the distribution of electric field in separating space. It was found that, the variations of parameters of electrodes and applied voltages directly influenced the distribution of electric field. Through the correlation of simulated and experimental results, the good separation results were got under the optimized operating parameter: U=20-30 kV, L=L(1)=L(2)=0.21 m, R(1)=0.114, R(2)=0.019 m, theta(1)=20 degrees and theta(2)=60 degrees .

  3. In situ electron holography of electric potentials inside a solid-state electrolyte: Effect of electric-field leakage

    Energy Technology Data Exchange (ETDEWEB)

    Aizawa, Yuka; Yamamoto, Kazuo; Sato, Takeshi [Nanostructures Research Laboratory, Japan Fine Ceramics Center, 2-4-1 Mutsuno, Atsuta-ku, Nagoya, Aichi 456-8587 (Japan); Murata, Hidekazu [Faculty of Science and Technology, Meijo University, 1-501 Shiogamaguchi, Tempaku-ku, Nagoya, Aichi 468-8502 (Japan); Yoshida, Ryuji; Fisher, Craig A.J. [Nanostructures Research Laboratory, Japan Fine Ceramics Center, 2-4-1 Mutsuno, Atsuta-ku, Nagoya, Aichi 456-8587 (Japan); Kato, Takehisa; Iriyama, Yasutoshi [Department of Materials, Physics and Energy Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya, Aichi 464-8601 (Japan); Hirayama, Tsukasa, E-mail: t-hirayama@jfcc.or.jp [Nanostructures Research Laboratory, Japan Fine Ceramics Center, 2-4-1 Mutsuno, Atsuta-ku, Nagoya, Aichi 456-8587 (Japan)

    2017-07-15

    In situ electron holography is used to observe changes of electric-potential distributions in an amorphous lithium phosphorus oxynitride (LiPON) solid-state electrolyte when different voltages are applied. 2D phase images are simulated by integrating the 3D potential distribution along the electron trajectory through a thin Cu/LiPON/Cu region. Good agreement between experimental and simulated phase distributions is obtained when the influence of the external electric field is taken into account using the 3D boundary-charge method. Based on the precise potential changes, the lithium-ion and lithium-vacancy distributions inside the LiPON layer and electric double layers (EDLs) are inferred. The gradients of the phase drops at the interfaces in relation to EDL widths are discussed. - Highlights: • Solid-state electrolyte LiPON has been observed by in situ electron holography. • Observed phase distributions are compared with those simulated numerically. • 3D electric fields around the specimen are taken into account in the simulation. • Electric-potential distributions inside LiPON have been obtained. • The lithium-ion and lithium-vacancy distributions inside the LiPON are inferred.

  4. optical, electrical and solid state properties of nano crystalline zinc ...

    African Journals Online (AJOL)

    Vincent

    electrical conductivity decreases as the energy increases while the optical conductivity increases gradually ... reflection coatings on window glass, video screen, camera ... are used for photo-thermal-devices. .... Transmission measurements were performed at normal ... The absorption coefficient (α) was determined from the.

  5. State of the Art on Different Types of Electric Vehicles

    DEFF Research Database (Denmark)

    Soares, F. J.; Almeida, P.M. Rocha Almeida; Lopes, J.A. Pecas

    2013-01-01

    This chapter presents the main drivers and challenges for the large-scale adoption of Electric Vehicles (EV). The most important issues related with EV technology are also analyzed, namely, the charging infrastructures’ power levels, the type of plugs, the most common powertrain architectures, an...

  6. 78 FR 73442 - Approval and Promulgation of Air Quality Implementation Plans; Maryland; State Boards Requirements

    Science.gov (United States)

    2013-12-06

    ... www.regulations.gov or email. The www.regulations.gov Web site is an ``anonymous access'' system... because the heads of Maryland Department of the Environment (MDE) and the Maryland Public Service... SIP Revision On August 14, 2013, the State of Maryland, through MDE, submitted a SIP revision ( 13-03B...

  7. Electric field obtained from an elliptic critical-state model for anisotropic type-II superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Romero-Salazar, C., E-mail: cromeros@ifuap.buap.mx; Hernández-Flores, O.A.

    2016-02-15

    Highlights: • An anisotropic critical state model that incorporates a non-zero electric field is proposed. • The critical current density is driven by the electric field. • To determinate the magnetic properties is not required a material law for the electric field magnitude. - Abstract: The conventional elliptic critical-state models (ECSM) establish that the electric field vector is zero when it flows a critical current density in a type-II superconductor. This proposal incorporates a finite electric field on the ECSM to study samples with anisotropic-current-carrying capacity. Our theoretical scheme has the advantage of being able to dispense of a material law which drives the electric field magnitude, however, it does not consider the magnetic history of the superconductor.

  8. The Manitoba Hydro-Electric Board, 42nd annual report for the year ended March 31, 1993

    International Nuclear Information System (INIS)

    1993-01-01

    Manitoba Hydro is a provincially owned corporation that produces electricity for distribution to 380,270 customers throughout all of Manitoba except for central Winnipeg. The utility operates 12 hydraulic generating stations, 2 thermal generating stations and 12 diesel sites. In the year ending March 31, 1993, total combined generation and imports were 27.8 billion kWh, of which 26.5 billion kWh was produced from hydraulic stations. Power sales to Manitoba customers totalled 14.6 billion kWh and extraprovincial sales totalled 9 billion kWh. Gross revenues were $823 million and total expenses were $847 million, for a net loss of $24 million. An all-time record high for exports was set at $142.7 million, partly due to good water flows and energy available from the Limestone Generating Station. Cancellation of a 1,000 MW purchase by Ontario Hydro resulted in suspension of construction of the Conawapa Project and associated transmission lines. The various sections of the report present information on customer services; employee relations; environmental management; resource planning; electricity generated, purchased, and exported; system development, including construction of new power plants; research and development; and safety. Financial statements are included. 32 figs., 4 tabs

  9. The Manitoba Hydro-Electric Board, 41st annual report for the year ended March 31, 1992

    International Nuclear Information System (INIS)

    1992-01-01

    A report is presented of the year's activities of the corporation responsible for supplying electric power to Manitoba. The corporation serves all areas of the province except central Winnipeg, and it operates 12 hydraulic generating stations, 2 thermal generating stations and 12 diesel sites. Combined generation and imports totalled 25 billion kWh, of which 23.6 kWh was produced from hydraulic stations. The various sections of the report present information on customer services; electricity generated, purchased, and exported; system development, including construction of new power plants; research and development; environmental services; personnel policies; and water management. Financial statements are also provided. Highlights of the year include: a net income of $17.7 million for the year ending 31 March 1992; the official opening of the Limestone generating station; the shutdown of the Grand Rapids generating station due to headcover failure; official launch of the Power Smart program; targeted reduction in load growth of 285 million MW; and conclusion of settlements with the Pas indian band, the community of Cormorant and the Grand Rapids First Nation. 8 figs

  10. United States Nuclear Regulatory Commission staff practice and procedure digest: Commission, Appeal Board and Licensing Board decisions, July 1972--September 1987

    International Nuclear Information System (INIS)

    1988-07-01

    This Revision 9 of the fourth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to September 30, 1987 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 9 replaces in part earlier editions and supplements and includes appropriate changes reflecting the amendments to the Rules of Practice effective through September 30, 1987. The Digest is roughly structured in accordance with the chronological sequence of the nuclear facility licensing process as set forth in Appendix A to 10 CFR Part 2. Those decisions which did not fit into that structure are dealt with in a section on ''general matters.'' Where appropriate, particular decisions are indexed under more than one heading. Some topical headings contain no decisions citations or discussion. It is anticipated that future updates to the Digest will utilize these headings

  11. United States Nuclear Regulatory Commission Staff practice and procedure digest: Commission, Appeal Board and Licensing Board Decisions, July 1972--December 1988

    International Nuclear Information System (INIS)

    1989-10-01

    This Revision 2 of the fifth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to December 31, 1988, interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 2 replaces in part earlier editions and revisions and includes appropriate changes reflecting the amendments to the Rules of Practice Effective through December 31, 1988. The Practice and Procedure Digest was originally prepared by attorneys in the NRC's Office of the Executive Legal Director (now, Office of the General Counsel) as an internal research tool. Because of its proven usefulness to those attorneys, it was decided that it might also prove useful to members of the public. Accordingly, the decision was made to publish the Digest and subsequent editions thereof. This edition of the Digest was prepared by attorneys from Aspen Systems Corporation pursuant to Contract number 18-89-346

  12. State Water Resources Control Board, California Agreement in Principle 1995 summary report

    International Nuclear Information System (INIS)

    Laudon, L.

    1996-03-01

    The Agreement in Principle (AIP) was established as part of the Secretary of Energy's Ten-Point Initiative which was announced in 1989. One of the Secretary's goals was to integrate the Department of Energy's (DOE) national security mission with their environmental restoration and compliance responsibilities. In an effort to accomplish this goal, DOE increased the role of the states in the oversight of DOE's monitoring programs through AIPs. The State of California and DOE negotiated the California AIP beginning in 1989 and signed the Agreement in September 1990. The AIP identified six DOE facilities to be evaluated under the program. The six facilities evaluated by the AIP program were: (1) Lawrence Livermore National Laboratory (LLNL) including LLNL's Site 300; (2) Sandia National Laboratories, California (SNL/CA); (3) Lawrence Berkeley Laboratory (LBL); (4) Stanford Linear Accelerator Center (SLAC); (5) Energy Technology Engineering Center (ETEC); and (6) Laboratory for Energy-Related Health Research (LEHR)

  13. An assessment of alternatives for replacing Freon 113 in bench type electrical circuit board cleaning at Fermi National Accelerator Laboratory

    International Nuclear Information System (INIS)

    Isakson, K.; Vessell, A.L.

    1994-07-01

    Fermilab is presently phasing out all solvents containing Freon-113 (CFC-113) as part of the continuing Waste Minimization Program. These solvents are used primarily in cleaning the flux off of electronic circuit boards after soldering, specifically in bench type work. Title VI of the Clean Air Act mandates a production phase-out for ozone depleting substances, like CFC-113, by the year 2000. Our study addresses this issue by evaluating and choosing alternative non-CFC solvents to replace the CFC-1 13 solvents at Fermilab. Several potential non-CFC cleaning solvents were tested. The evaluation took place in three parts: controlled experimental evaluation, chemical composition evaluation, and employee performed evaluation. First, we performed a controlled nine-step procedure with the potential solvents where each was evaluated in categories such as cleaning effectiveness, odor, residue, type of output and drying time. Next, we listed the chemical composition of each solvent. We noted which solvents contained hydrochlorofluorocarbons because they are targeted for phase-out in the future and will be recognized as interim solutions only. Finally, after preliminary testing, five solvents were chosen as the best options. These solvents were sent to be tested by Fermilab employees who use such materials. Their opinions are valuable not only because they are knowledgeable in this field, but also because they will be using the solvents chosen to replace the CFC-113 solvents. The results favored two ''best alternatives'': Safezone Solvent Flux Remover by Miller-Stephenson and E-Series CFC Free Flux-Off 2000 by Chemtech. Another possible solution also pursued is the no-clean solder option. In our study, we were not able to thoroughly investigate the many types of no-clean solders because of time and financial constraints. The testing that was done, however, showed that no-clean solder was a viable alternative in many cases

  14. Association of Regulatory Boards of Optometry

    Science.gov (United States)

    ... website of the Association of Regulatory Boards of Optometry (ARBO). ARBO's web site is designed to provide resources to regulatory boards of optometry throughout the world. State/Provincial/Territorial Boards of ...

  15. An On-Board Remaining Useful Life Estimation Algorithm for Lithium-Ion Batteries of Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Xiaoyu Li

    2017-05-01

    Full Text Available Battery remaining useful life (RUL estimation is critical to battery management and performance optimization of electric vehicles (EVs. In this paper, we present an effective way to estimate RUL online by using the support vector machine (SVM algorithm. By studying the characteristics of the battery degradation process, the rising of the terminal voltage and changing characteristics of the voltage derivative (DV during the charging process are introduced as the training variables of the SVM algorithm to determine the battery RUL. The SVM is then applied to build the battery degradation model and predict the battery real cycle numbers. Experimental results prove that the built battery degradation model shows higher accuracy and less computation time compared with those of the neural network (NN method, thereby making it a potential candidate for realizing online RUL estimation in a battery management system (BMS.

  16. State Water Resources Control Board, California Agreement in Principle 1995 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Laudon, L.

    1996-03-01

    The Agreement in Principle (AIP) was established as part of the Secretary of Energy`s Ten-Point Initiative which was announced in 1989. One of the Secretary`s goals was to integrate the Department of Energy`s (DOE) national security mission with their environmental restoration and compliance responsibilities. In an effort to accomplish this goal, DOE increased the role of the states in the oversight of DOE`s monitoring programs through AIPs. The State of California and DOE negotiated the California AIP beginning in 1989 and signed the Agreement in September 1990. The AIP identified six DOE facilities to be evaluated under the program. The six facilities evaluated by the AIP program were: (1) Lawrence Livermore National Laboratory (LLNL) including LLNL`s Site 300; (2) Sandia National Laboratories, California (SNL/CA); (3) Lawrence Berkeley Laboratory (LBL); (4) Stanford Linear Accelerator Center (SLAC); (5) Energy Technology Engineering Center (ETEC); and (6) Laboratory for Energy-Related Health Research (LEHR).

  17. Agreement Between the Board of Control of Ferris State College, Big Rapids, Michigan and The Ferris Faculty Association - MEA-NEA 1973-75.

    Science.gov (United States)

    Ferris State Coll., Big Rapids, MI.

    This agreement between the Board of Control of Ferris State College and the Ferris Faculty Association--MEA-NEA covers the period 1973-75. Sections of the agreement cover the basic contractual provisions, rights of the association, faculty rights, administrative responsibilities, promotions and transfers, teaching conditions, retrenchment,…

  18. Agreement between the Board of Control of Ferris State College and the Ferris College Faculty Association (MEA/NEA), November 12, 1984-June 30, 1987.

    Science.gov (United States)

    Michigan Education Association, East Lansing.

    The collective bargaining agreement between the Board of Ferris State College and Ferris Faculty Association Chapter (507 members), an affiliate of the National Education Association and the Michigan Education Association, covering the period November 12, 1984-June 30, 1987 is presented. Items covered in the agreement include: unit recognition,…

  19. Rules of the New York State Board of Regents Relating to Definitions of Unprofessional Conduct, with Amendments Adopted through November 1984.

    Science.gov (United States)

    New York State Education Dept., Albany.

    Rules concerning unprofessional conduct are offered by the New York State Board of Regents. Attention is directed to: general provisions for all professions, health professions, and design professions (e.g., architecture and engineering), as well as special provisions for: the medical profession, the dentistry and dental hygiene professions, the…

  20. Independent assessment team report to the Alberta Energy and Utilities Board on implementing deregulation of electricity generation in Alberta

    International Nuclear Information System (INIS)

    1999-01-01

    The particular aspect of deregulation of electricity generation in Alberta discussed is the economics of power purchase agreements (PPAs). There are various parameters associated with the PPAs that are emphasized including: technical characteristics; unit availability, capital costs and O and M costs; coal costs; gas costs; payment for flexible operation; hydro obligation amounts; income tax; property tax; and working capital, insurance and other costs. Chapter one of the Independent Assessment Team (IAT) report covers the report scope, and chapter two describes certain main principles underlying determination of PPAs. Chapter three discusses the IAT's determination of the PPA's forms and their main terms and conditions. Chapter four describes the IAT's determination of the underlying parameter values of the PPAs. Chapter five describes the ITA's determination of the allowed rate of return on equity and the capital structure of PPAs. An appendix covers a detailed description of the consultations carried out by the IAT; a report by HESI on the results of Pool modelling carried out to date (the HESI work was done to assist the IAT in determining PPAs, not the auction design); summary outputs of the IAT's financial model with indicative financial statements for each unit and company under the PPAs; and a document on shared services, common facilities and new units

  1. Guide to federal regulation of sales of imported electricity in Canada, Mexico and the United States

    International Nuclear Information System (INIS)

    2005-01-01

    This Guide to Federal Regulation of Sales of Imported Electricity in Canada, Mexico, and the United States promotes cross-border electricity trade. It provides information on federal regulation of cross-border electricity trade and is intended to be used together with a companion guide called the North American Regulation of International Electricity Trade which outlines regulations for the construction and operation of cross-border power lines and the permitting requirements for electricity exports and imports between Canada, Mexico and the United States. The guide outlines the basic elements of the general federal regulatory process that applies to a given North American cross-border electricity trade. It offers an improved understanding of the applicable country's federal regulatory regime. Different federal government agencies within each country may regulate different aspects of a particular cross-border electricity trade. This guide does not examine the requirements that may apply at the state or provincial government levels. Rather, it is a collaborative effort of the 3 national energy departments and energy regulators that support the Experts Group on Electricity Regulatory Issues, a specialized unit assembled by the North American Energy Working Group (NAEWG). It was noted that the energy policies and regulations of each nation can change periodically

  2. Probabilistic Steady-State Operation and Interaction Analysis of Integrated Electricity, Gas and Heating Systems

    Directory of Open Access Journals (Sweden)

    Lun Yang

    2018-04-01

    Full Text Available The existing studies on probabilistic steady-state analysis of integrated energy systems (IES are limited to integrated electricity and gas networks or integrated electricity and heating networks. This paper proposes a probabilistic steady-state analysis of integrated electricity, gas and heating networks (EGH-IES. Four typical operation modes of an EGH-IES are presented at first. The probabilistic energy flow problem of the EGS-IES considering its operation modes and correlated uncertainties in wind/solar power and electricity/gas/heat loads is then formulated and solved by the Monte Carlo method based on Latin hypercube sampling and Nataf transformation. Numerical simulations are conducted on a sample EGH-IES working in the “electricity/gas following heat” mode to verify the probabilistic analysis proposed in this paper and to study the effects of uncertainties and correlations on the operation of the EGH-IES, especially uncertainty transmissions among the subnetworks.

  3. Geothermal energy in the western United States and Hawaii: Resources and projected electricity generation supplies

    International Nuclear Information System (INIS)

    1991-09-01

    Geothermal energy comes from the internal heat of the Earth, and has been continuously exploited for the production of electricity in the United States since 1960. Currently, geothermal power is one of the ready-to-use baseload electricity generating technologies that is competing in the western United States with fossil fuel, nuclear and hydroelectric generation technologies to provide utilities and their customers with a reliable and economic source of electric power. Furthermore, the development of domestic geothermal resources, as an alternative to fossil fuel combustion technologies, has a number of associated environmental benefits. This report serves two functions. First, it provides a description of geothermal technology and a progress report on the commercial status of geothermal electric power generation. Second, it addresses the question of how much electricity might be competitively produced from the geothermal resource base. 19 figs., 15 tabs

  4. An assessment of the cyber security legislation and its impact on the United States electrical sector

    Science.gov (United States)

    Born, Joshua

    The purpose of this research was to examine the cyber-security posture for the United States' electrical grid, which comprises a major component of critical infrastructure for the country. The United States electrical sector is so vast, that the Department of Homeland Security (DHS) estimates, it contains more than 6,413 power plants (this includes 3,273 traditional electric utilities and 1,738 nonutility power producers) with approximately 1,075 gigawatts of energy produced on a daily basis. A targeted cyber-security attack against the electric grid would likely have catastrophic results and could even serve as a precursor to a physical attack against the United States. A recent report by the consulting firm Black and Veatch found that one of the top five greatest concerns for United States electric utilities is the risk that cybersecurity poses to their industry and yet, only one-third state they are currently prepared to meet the increasingly likely threat. The report goes on to state, "only 32% of electric utilities surveyed had integrated security systems with the proper segmentation, monitoring and redundancies needed for cyber threat protection. Another 48 % said they did not" Recent estimates indicate that a large-scale cyber-attack against this sector could cost the United States economy as much as a trillion dollars within a weeks' time. Legislative efforts in the past have primarily been focused on creating mandates that encourage public and private partnership, which have been not been adopted as quickly as desired. With 85 % of all electric utilities being privately owned, it is key that the public and private sector partner in order to mitigate risks and respond as a cohesive unit in the event of a major attack. Keywords: Cybersecurity, Professor Riddell, cyber security, energy, intelligence, outlook, electrical, compliance, legislation, partnerships, critical infrastructure.

  5. Neutron particle-hole electric dipole states in 206207208Pb

    International Nuclear Information System (INIS)

    Dickey, P.A.

    1979-01-01

    Inelastic proton scattering on 206 Pb, 207 Pb, and 208 Pb through isobaric analog resonances was used to study neutron particle-hole excitations with large ground-state gamma branches in these Pb isotopes. Relative (p,p') cross sections at 90 0 are extracted for structures selectively excited on the d/sub 5/2/, s/sub 1/2/, and d/sub 3/2/-g/sub 7/2/ resonances. Interpretation of excitations in 206 Pb and 207 Pb in terms of coupling to states in 208 Pb is discussed. Branching ratios for 1 - states in 208 Pb at 4.84, 5.29, 5.94, and 6.31 MeV and the 1/2 + state in 207 Pb at 4.63 MeV are deduced. 15 figures, 4 tables

  6. Checking a printed board

    CERN Multimedia

    1977-01-01

    An 'Interactive Printed Circuit Board Design System' has been developed by a company in a Member-State. Printed circuits are now produced at the SB's surface treatment workshop using a digitized photo-plotter.

  7. Identification of electrical resistance of fresh state concrete for nondestructive setting process monitoring

    International Nuclear Information System (INIS)

    Shin, Sung Woo

    2015-01-01

    Concrete undergoes significant phase changes from liquid to solid states as hydration progresses. These phase changes are known as the setting process. A liquid state concrete is electrically conductive because of the presence of water and ions. However, since the conductive elements in the liquid state of concrete are consumed to produce non-conductive hydration products, the electrical conductivity of hydrating concrete decreases during the setting process. Therefore, the electrical properties of hydrating concrete can be used to monitor the setting process of concrete. In this study, a parameter identification method to estimate electrical parameters such as ohmic resistance of concrete is proposed. The effectiveness of the proposed method for monitoring the setting process of concrete is experimentally validated

  8. Electric utility fuel choice behavior in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Joskow, P.L.; Mishkin, F.S.

    1977-10-01

    Electric utility fuel choice behavior is analyzed by a conditional logit model to determine the effects of changing oil prices of five plants. Three of the plants faced favorable expected coal prices and, like many areas of the country, were insensitive to changing oil prices. This was not the case at the New England plant, however, where relatively small price increases would decrease the likelihood of choosing oil as an alternative fuel for new plants. The modeling of utility behavior in fuel decisions is felt to be applicable to other industries where a continuum of decision possibilities does not reasonably characterize choice alternatives. New behavior models are urged in order to obtain better predictions of the effects of a changing economic environment. 10 references.

  9. The determinants of electricity theft: An empirical analysis of Indian states

    International Nuclear Information System (INIS)

    Gaur, Vasundhara; Gupta, Eshita

    2016-01-01

    More than 20% of the electricity generated in India is lost to rampant thefts. Drawing data from 28 states of India over a time span of five years (2005–2009), this paper examines the role played by socio-economic and governance factors in determining the extent of electricity thefts in Indian states. Results from the Feasible Generalised Least Squares (FGLS) model demonstrate that lesser corruption, higher state tax to GDP ratio, greater collection efficiency of electricity bills by state utilities, higher share of private installed capacity, lesser poverty, greater literacy and greater income are closely associated with lesser power thefts. A better understanding of the key determinants of thefts in electricity distribution is vital for policy makers for designing policies. - Highlights: •Over 20% of total electricity generated in India is lost to thefts. •The study attempts to identify the determinants of electricity theft in India. •Use of panel data from 2005 to 2009 for 28 Indian states. •FGLS and OLS regression results are compared. •The determinants of power theft are both governmental and socio-economic in nature.

  10. Why Not Charter School Boards?

    Science.gov (United States)

    Schlechty, Phillip C.; Cole, Robert W.

    1993-01-01

    Claiming that individual school board members act in selfish ways, proposes electing entire school board as a slate. Board would collectively be held responsible for performance of the school system and all of its employees. State legislation would be required to specify how interested groups would select a slate and create a charter, which is the…

  11. Nuclear electric power and the proliferation of nuclear weapon states

    International Nuclear Information System (INIS)

    Walske, C.

    1977-01-01

    Control and elimination of the strategic nuclear weapons held by the nuclear weapon states remains the central problem in the arms control and disarmament field. Whether the proliferation of nations with nuclear weapons can be stopped is dubious. A sovereign nation will launch a nuclear weapons program if it has the motivation and resource. Motivation depends on military and political considerations. The necessary resources are economic and technological. Conditions in some sovereign states explain this issue. A survey of commercial nuclear power programs outside the USA lists 45 countries using or planning to use nuclear reactors for power generation. There are currently 112 reactors now operating outside the United States, 117 more under construction, 60 on order, and 180 planned. The U. S. as of December 1976 has 64 operating reactors, 72 under construction, 84 on order, and 8 planned. Nuclear trade and export policies are discussed. In this article, Mr. Walske says that American industry is convinced that the need for nuclear energy abroad is more urgent than in the United States; that in the long run, the breeder reactor must be developed to enable the supply of nuclear fuel to last for centuries; and that the experience of American industry abroad has convinced it that emphasis on restrictive, denial type policies will almost certainly fail--a collapse of what has been gained through the test ban treaty and the nonproliferation treaty

  12. Engineering Topological Surface State of Cr-doped Bi2Se3 under external electric field

    Science.gov (United States)

    Zhang, Jian-Min; Lian, Ruqian; Yang, Yanmin; Xu, Guigui; Zhong, Kehua; Huang, Zhigao

    2017-03-01

    External electric field control of topological surface states (SSs) is significant for the next generation of condensed matter research and topological quantum devices. Here, we present a first-principles study of the SSs in the magnetic topological insulator (MTI) Cr-doped Bi2Se3 under external electric field. The charge transfer, electric potential, band structure and magnetism of the pure and Cr doped Bi2Se3 film have been investigated. It is found that the competition between charge transfer and spin-orbit coupling (SOC) will lead to an electrically tunable band gap in Bi2Se3 film under external electric field. As Cr atom doped, the charge transfer of Bi2Se3 film under external electric field obviously decreases. Remarkably, the band gap of Cr doped Bi2Se3 film can be greatly engineered by the external electric field due to its special band structure. Furthermore, magnetic coupling of Cr-doped Bi2Se3 could be even mediated via the control of electric field. It is demonstrated that external electric field plays an important role on the electronic and magnetic properties of Cr-doped Bi2Se3 film. Our results may promote the development of electronic and spintronic applications of magnetic topological insulator.

  13. Deterministic Electrical Charge-State Initialization of Single Nitrogen-Vacancy Center in Diamond

    Directory of Open Access Journals (Sweden)

    Y. Doi

    2014-03-01

    Full Text Available Apart from applications in classical information-processing devices, the electrical control of atomic defects in solids at room temperature will have a tremendous impact on quantum devices that are based on such defects. In this study, we demonstrate the electrical manipulation of individual prominent representatives of such atomic solid-state defects, namely, the negative charge state of single nitrogen-vacancy defect centers (NV^{−} in diamond. We experimentally demonstrate, deterministic, purely electrical charge-state initialization of individual NV centers. The NV centers are placed in the intrinsic region of a p-i-n diode structure that facilitates the delivery of charge carriers to the defect for charge-state switching. The charge-state dynamics of a single NV center were investigated by time-resolved measurements and a nondestructive single-shot readout of the charge state. Fast charge-state switching rates (from negative to neutrally charged defects, which are greater than 0.72 ± 0.10  μs^{−1}, were realized. Furthermore, in no-operation mode, the realized charge states were stable for presumably much more than 0.45 s. We believe that the results obtained are useful not only for ultrafast electrical control of qubits, long T_{2} quantum memory, and quantum sensors associated with single NV centers but also for classical memory devices based on single atomic storage bits working under ambient conditions.

  14. Influence of an electric field on photostimulated states in NH4BPh4 films

    Science.gov (United States)

    Antonova, O. V.; Nadolinny, V. A.; Il'inchik, E. A.; Trubin, S. V.

    2012-10-01

    The influence of an electric field on stable photostimulated triplet states of NH4BPh4 at a temperature of 77 K have been studied by EPR spectroscopy. It has been established that, on exposure to UV radiation, electron capture by traps in the band gaps takes place with formation of triplet state. After application of an electric field, triplet states are destructed because, with an increase in the applied voltage, a gradual inclination of energy bands takes place and electrons found in traps on different energy levels are released. The assumption that captured electrons are found in traps on different energy levels is confirmed by earlier studies of thermoluminescence spectra.

  15. Electricity

    CERN Document Server

    Basford, Leslie

    2013-01-01

    Electricity Made Simple covers the fundamental principles underlying every aspect of electricity. The book discusses current; resistance including its measurement, Kirchhoff's laws, and resistors; electroheat, electromagnetics and electrochemistry; and the motor and generator effects of electromagnetic forces. The text also describes alternating current, circuits and inductors, alternating current circuits, and a.c. generators and motors. Other methods of generating electromagnetic forces are also considered. The book is useful for electrical engineering students.

  16. Electric power and the environment: An analysis of pollutant emissions at Argentine state-owned electric power stations

    Energy Technology Data Exchange (ETDEWEB)

    Carnevali, D; Suarez, C E [Instituto de Economia Energetica, San Carlos de Bariloche (Argentina)

    1991-08-01

    This paper describes the impact on particulate and 'greenhouse gases' emissions of substitution policies implemented by Argentine state-owned electric power stations. Those policies involve the substitution, on the one hand, of hydroelectric and nuclear energy for conventional thermal energy and, on the other hand, of natural gas for fuel oil, diesel oil and coal. As additional investments are required in conventional thermal power stations to prevent environmental pollution, the investment savings generated by substitution policies have been calculated. While the environmental impacts of hydroelectric, nuclear and natural gas facilities is locally significant and is experienced in geographical areas away from cities, there can be no doubt that the substitution policies implemented in the Argentine electricity sector have overall both ecological and economic benefits. (author). 1 ref., 8 figs, 2 tabs.

  17. State-of-the-art assessment of electric vehicles and hybrid vehicles

    Science.gov (United States)

    1977-01-01

    The Electric and Hybrid Vehicle Research, Development, and Demonstration Act of 1976 (PL 94-413) requires that data be developed to characterize the state of the art of vehicles powered by an electric motor and those propelled by a combination of an electric motor and an internal combustion engine or other power sources. Data obtained from controlled tests of a representative number of sample vehicles, from information supplied by manufacturers or contained in the literature, and from surveys of fleet operators of individual owners of electric vehicles is discussed. The results of track and dynamometer tests conducted by NASA on 22 electric, 2 hybrid, and 5 conventional vehicles, as well as on 5 spark-ignition-engine-powered vehicles, the conventional counterparts of 5 of the vehicles, are presented.

  18. Deregulation of ESI and privatization of state electric utilities in Thailand

    International Nuclear Information System (INIS)

    Chirarattananon, Surapong; Nirukkanaporn, Supattana

    2006-01-01

    In Thailand, electric supply services have all been taken over by the state and operated under state enterprises since 1968. Under a law empowering its monopoly, state utilities accumulated assets and built up their manpower to expand and operate the power system to serve the whole country. During the time of high growth in power demand in early the1990 s, the government initiated a move to privatize state electric utilities, the pace of which was firmed up after 1997, the year of the financial crash. Engagement of independent power producers (IPPs) through the use of long-term power purchase agreements (PPAs) for supply of electric power into the system operated by state electric utilities was also initiated from the mid 1990s. Total capacity of IPPs and Small Power Producers (SPPs) that sell excess power from cogeneration on to the system) rose and by the late 1990s started to create a constraint on system economic dispatch. In 1999 the National Energy Policy Council (NEPC) approved a recommendation of international consultants to transform the electric supply industry into a structure similar to the system in the United Kingdom. The transformation was proposed to precede corporatization and privatization of state electric utilities. The objectives of deregulation were to revoke the monopoly in ESI, to improve transparency in electricity pricing, to reduce debts of state enterprises, and to improve economic efficiency. Industry participants have voiced strong objection to the industry model proposed. With the change of market structure in UK to the New Electricity Trading Arrangement (NETA), the secretariat of NEPC also proposed a new structure similar to NETA. More acceptance from industry participants have been received for the new structure. However, it has been assumed that the proposed structure would bring improvement in system reliability, drawing investment into power generation in a manner that would be efficient. Tariff has also been expected to become

  19. Deregulation of ESI and privatization of state electric utilities in Thailand

    Energy Technology Data Exchange (ETDEWEB)

    Surapong Chirarattananon; Supattana Nirukkanaporn [Asian Institute of Technology, Pathum Thani (Thailand). Energy Program

    2006-11-15

    In Thailand, electric supply services have all been taken over by the state and operated under state enterprises since 1968. Under a law empowering its monopoly, state utilities accumulated assets and built up their manpower to expand and operate the power system to serve the whole country. During the time of high growth in power demand in the early 1990s, the government initiated a move to privatize state electric utilities, the pace of which was firmed up after 1997, the year of the financial crash. Engagement of independent power producers (IPPs) through the use of long-term power purchase agreements (PPAs) for supply of electric power into the system operated by state electric utilities was also initiated from the mid 1990s. Total capacity of IPPs and Small Power Producers (SPPs) that sell excess power from cogeneration on to the system, rose and by the late 1990s started to create a constraint on system economic dispatch. In 1999 the National Energy Policy Council (NEPC) approved a recommendation of international consultants to transform the electric supply industry into a structure similar to the system in the United Kingdom. The transformation was proposed to precede corporatization and privatization of state electric utilities. The objectives of deregulation were to revoke the monopoly in ESI, to improve transparency in electricity pricing, to reduce debts of state enterprises, and to improve economic efficiency. Industry participants have voiced strong objection to the industry model proposed. With the change of market structure in UK to the New Electricity Trading Arrangement (NETA), the secretariat of NEPC also proposed a new structure similar to NETA. More acceptance from industry participants have been received for the new structure. However, it has been assumed that the proposed structure would bring improvement in system reliability, drawing investment into power generation in a manner that would be efficient. Tariff has also been expected to become

  20. Deregulation of ESI and privatization of state electric utilities in Thailand

    Energy Technology Data Exchange (ETDEWEB)

    Chirarattananon, Surapong [Energy Program, Asian Institute of Technology, PO Box 4, Klong Luang, Pathum Thani 12120 (Thailand)]. E-mail: surapong@ait.ac.th; Nirukkanaporn, Supattana [Energy Program, Asian Institute of Technology, PO Box 4, Klong Luang, Pathum Thani 12120 (Thailand)

    2006-11-15

    In Thailand, electric supply services have all been taken over by the state and operated under state enterprises since 1968. Under a law empowering its monopoly, state utilities accumulated assets and built up their manpower to expand and operate the power system to serve the whole country. During the time of high growth in power demand in early the1990 s, the government initiated a move to privatize state electric utilities, the pace of which was firmed up after 1997, the year of the financial crash. Engagement of independent power producers (IPPs) through the use of long-term power purchase agreements (PPAs) for supply of electric power into the system operated by state electric utilities was also initiated from the mid 1990s. Total capacity of IPPs and Small Power Producers (SPPs) that sell excess power from cogeneration on to the system) rose and by the late 1990s started to create a constraint on system economic dispatch. In 1999 the National Energy Policy Council (NEPC) approved a recommendation of international consultants to transform the electric supply industry into a structure similar to the system in the United Kingdom. The transformation was proposed to precede corporatization and privatization of state electric utilities. The objectives of deregulation were to revoke the monopoly in ESI, to improve transparency in electricity pricing, to reduce debts of state enterprises, and to improve economic efficiency. Industry participants have voiced strong objection to the industry model proposed. With the change of market structure in UK to the New Electricity Trading Arrangement (NETA), the secretariat of NEPC also proposed a new structure similar to NETA. More acceptance from industry participants have been received for the new structure. However, it has been assumed that the proposed structure would bring improvement in system reliability, drawing investment into power generation in a manner that would be efficient. Tariff has also been expected to become

  1. Deregulation of ESI and privatization of state electric utilities in Thailand

    International Nuclear Information System (INIS)

    Surapong Chirarattananon; Supattana Nirukkanaporn

    2006-01-01

    In Thailand, electric supply services have all been taken over by the state and operated under state enterprises since 1968. Under a law empowering its monopoly, state utilities accumulated assets and built up their manpower to expand and operate the power system to serve the whole country. During the time of high growth in power demand in the early 1990s, the government initiated a move to privatize state electric utilities, the pace of which was firmed up after 1997, the year of the financial crash. Engagement of independent power producers (IPPs) through the use of long-term power purchase agreements (PPAs) for supply of electric power into the system operated by state electric utilities was also initiated from the mid 1990s. Total capacity of IPPs and Small Power Producers (SPPs) that sell excess power from cogeneration on to the system, rose and by the late 1990s started to create a constraint on system economic dispatch. In 1999 the National Energy Policy Council (NEPC) approved a recommendation of international consultants to transform the electric supply industry into a structure similar to the system in the United Kingdom. The transformation was proposed to precede corporatization and privatization of state electric utilities. The objectives of deregulation were to revoke the monopoly in ESI, to improve transparency in electricity pricing, to reduce debts of state enterprises, and to improve economic efficiency. Industry participants have voiced strong objection to the industry model proposed. With the change of market structure in UK to the New Electricity Trading Arrangement (NETA), the secretariat of NEPC also proposed a new structure similar to NETA. More acceptance from industry participants have been received for the new structure. However, it has been assumed that the proposed structure would bring improvement in system reliability, drawing investment into power generation in a manner that would be efficient. Tariff has also been expected to become

  2. Wood pellets, what else? Greenhouse gas parity times of European electricity from wood pellets produced in the south-eastern United States using different softwood feedstocks

    Energy Technology Data Exchange (ETDEWEB)

    Hanssen, Steef V. [Radboud Univ., Nijmegen (Netherlands). Dept. of Environmental Science, Faculty of Science; Utrecht Univ., Utrecht (The Netherlands). Copernicus Inst. of Sustainable Development, Faculty of Geosciences; Duden, Anna S. [Utrecht Univ., Utrecht (The Netherlands). Copernicus Inst. of Sustainable Development, Faculty of Geosciences; Junginger, Martin [Utrecht Univ., Utrecht (The Netherlands). Copernicus Inst. of Sustainable Development, Faculty of Geosciences; Dale, Virginia H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Environmental Sciences Division, Center for BioEnergy Sustainability; van der Hilst, Floor [Utrecht Univ., Utrecht (The Netherlands). Copernicus Inst. of Sustainable Development, Faculty of Geosciences

    2016-12-29

    Several EU countries import wood pellets from the south-eastern United States. The imported wood pellets are (co-)fired in power plants with the aim of reducing overall greenhouse gas (GHG) emissions from electricity and meeting EU renewable energy targets. To assess whether GHG emissions are reduced and on what timescale, we construct the GHG balance of wood-pellet electricity. This GHG balance consists of supply chain and combustion GHG emissions, carbon sequestration during biomass growth, and avoided GHG emissions through replacing fossil electricity. We investigate wood pellets from four softwood feedstock types: small roundwood, commercial thinnings, harvest residues, and mill residues. Per feedstock, the GHG balance of wood-pellet electricity is compared against those of alternative scenarios. Alternative scenarios are combinations of alternative fates of the feedstock material, such as in-forest decomposition, or the production of paper or wood panels like oriented strand board (OSB). Alternative scenario composition depends on feedstock type and local demand for this feedstock. Results indicate that the GHG balance of wood-pellet electricity equals that of alternative scenarios within 0 to 21 years (the GHG parity time), after which wood-pellet electricity has sustained climate benefits. Parity times increase by a maximum of twelve years when varying key variables (emissions associated with paper and panels, soil carbon increase via feedstock decomposition, wood-pellet electricity supply chain emissions) within maximum plausible ranges. Using commercial thinnings, harvest residues or mill residues as feedstock leads to the shortest GHG parity times (0-6 years) and fastest GHG benefits from wood-pellet electricity. Here, we find shorter GHG parity times than previous studies, for we use a novel approach that differentiates feedstocks and considers alternative scenarios based on (combinations of) alternative feedstock fates, rather than on alternative land

  3. Board game

    International Nuclear Information System (INIS)

    Brennan, N.S.

    1982-01-01

    A board game comprises a board, a number of counters and two dice. The board is marked to provide a central area, representing the nucleus of an atom, and six or more annular rings extending concentrically around the central area, the rings being divided into 2,8,18,32,48 and 72 squares. Each ring represents an electron shell, and some of the squares are numbered, the number representing the atomic number of different elements. (author)

  4. Nonradiative recombination onto shallow bound states in confined systems in electric field

    International Nuclear Information System (INIS)

    Sinyavskij, Eh.P.; Rusanov, A.M.

    1999-01-01

    A study has been made of the one-phonon recombination of carriers onto shallow impurity states in parabolic quantum wells in the longitudinal electric field. It has been found that processes of the one-phonon recombination in confined systems occur in a more active way the in a bulk material.The possibility of electrically induced one-quantum transitions in confined systems is being discussed

  5. Electricity diversification, decentralization, and decarbonization: The role of U.S. state energy policy

    Science.gov (United States)

    Carley, Sanya

    In response to mounting concerns about climate change and an over-dependence on fossil fuels, U.S. state governments have assumed leadership roles in energy policy. State leaders across the country have constructed policies that target electricity sector operations, and aim to increase the percentage of renewable electricity generation, increase the use of distributed generation, and decrease carbon footprints. The policy literature, however, lacks compelling empirical evidence that state initiatives toward these ends are effective. This research seeks to contribute empirical insights that can help fill this void in the literature, and advance policy knowledge about the efficacy of these instruments. This three-essay dissertation focuses on the assessment of state energy policy instruments aimed at the diversification, decentralization, and decarbonization of the U.S. electricity sector. The first essay considers the effects of state efforts to diversify electricity portfolios via increases in renewable energy. This essay asks: are state-level renewable portfolio standards (RPS) effective at increasing renewable energy deployment, as well as the share of renewable energy out of the total generation mix? Empirical results demonstrate that RPS policies so far are effectively encouraging total renewable energy deployment, but not the percentage of renewable energy generation. The second essay considers state policy efforts to decentralize the U.S. electricity sector via instruments that remove barriers to distributed generation (DG) deployment. The primary question this essay addresses is whether the removal of legal barriers acts as a primary motivating factor for DG deployment. Empirical results reveal that net metering policies are positively associated with DG deployment; interconnection standards significantly increase the likelihood that end-users will adopt DG capacity; and utility DG adoption is related to standard market forces. The third essay asks: what are

  6. A survey of collection development for United States Medical Licensing Examination (USMLE) and National Board Dental Examination (NBDE) preparation material.

    Science.gov (United States)

    Hendrix, Dean; Hasman, Linda

    2008-07-01

    The research sought to ascertain medical and dental libraries' collection development policies, evaluation methods, purchase decisions, and issues that relate to print and electronic United States Medical Licensing Examination (USMLE) and National Board Dental Examination (NBDE) preparation materials. The investigators surveyed librarians supporting American Association of Medical Colleges (AAMC)-accredited medical schools (n = 58/125) on the USMLE and librarians supporting American Dental Association (ADA)-accredited dental schools (n = 23/56) on the NBDE. The investigators analyzed the data by cross-tabulating and filtering the results using EFM Continuum web survey software. Investigators also surveyed print and electronic USMLE and NBDE preparation materials from 2004-2007 to determine the number of publications and existence of reviews. A majority of responding AAMC libraries (62%, n = 58) provide at least 1 electronic or online USMLE preparation resource and buy an average of 11.6 print USMLE titles annually. Due to a paucity of NBDE print and electronic resources, ADA libraries bought significantly fewer print resources, and only 1 subscribed to an electronic resource. The most often reported evaluation methods for both populations were feedback from medical or dental students, feedback from medical or dental faculty, and online trials. Some AAMC (10%, n = 58) and ADA libraries (39%, n = 23) libraries reported that no evaluation of these materials occured at their libraries. From 2004-2007, publishers produced 45 USMLE preparation resources (total n = 546) to every 1 NBDE preparation resource (total n = 12). Users' needs, institutional missions and goals, financial status, and official collection policies most often underlie decisions to collect or not collect examination preparation materials. Evaluating the quality of examination preparation materials can be problematic due to lack of published reviews, lack of usability testing by libraries, and

  7. An examination of electricity generation by utility organizations in the Southeast United States

    International Nuclear Information System (INIS)

    Craig, Christopher A.; Feng, Song

    2016-01-01

    This study examined the impact of climatic variability on electricity generation in the Southeast United States. The relationship cooling degree days (CDD) and heating degree days (HDD) shared with electricity generation by fuel source was explored. Using seasonal autoregressive integrated weighted average (ARIMA) and seasonal simple exponentially smoothed models, retrospective time series analysis was run. The hypothesized relationship between climatic variability and total electricity generation was supported, where an ARIMA model including CDDs as a predictor explained 57.6% of the variability. The hypothesis that climatic variability would be more predictive of fossil fuel electricity generation than electricity produced by clean energy sources was partially supported. The ARIMA model for natural gas indicated that CDDS were the only predictor for the fossil fuel source, and that 79.4% of the variability was explained. Climatic variability was not predictive of electricity generation from coal or petroleum, where simple seasonal exponentially smoothed models emerged. However, HDDs were a positive predictor of hydroelectric electricity production, where 48.9% of the variability in the clean energy source was explained by an ARIMA model. Implications related to base load electricity from fossil fuels, and future electricity generation projections relative to extremes and climate change are discussed. - Highlights: • Models run to examine impact of climatic variability on electricity generation. • Cooling degree days explained 57.6% of variability in total electricity generation. • Climatic variability was not predictive of coal or petroleum generation. • Cooling degree days explained 79.4% of natural gas generation. • Heating degree days were predictive of nuclear and hydroelectric generation.

  8. State-level renewable electricity policies and reductions in carbon emissions

    International Nuclear Information System (INIS)

    Prasad, Monica; Munch, Steven

    2012-01-01

    A wide range of renewable electricity policies has been adopted at the state level in the United States, but to date there has been no large-scale, empirical assessment of the effect of these policies on carbon emissions. Such an assessment is important because scholars have pointed out that increases in renewable electricity will not necessarily lead to declines in carbon emissions. We examine the effects of a range of policies across 39 states. We find significant and robust decreases in carbon emissions associated with the introduction of public benefit funds, a form of “carbon tax” adopted by 19 states to date. Our aim in this paper is not to provide a final judgment on these policies, many of which may not have been in place long enough to show strong effects, but to shift the attention of the research community away from proximate measures such as increases in clean electricity generation and onto measurement of lower carbon emissions. - Highlights: ► We ask whether state-level renewable electricity policies in the United States have succeeded in lowering carbon emissions. ► We examine net metering, retail choice, fuel generation disclosure, mandatory green power options, public benefit funds, and renewable portfolio standards. ► The introduction of public benefit funds, a kind of carbon tax, is associated with decreases in carbon emissions.

  9. Robustness of edge states in topological quantum dots against global electric field

    Science.gov (United States)

    Qu, Jin-Xian; Zhang, Shu-Hui; Liu, Ding-Yang; Wang, Ping; Yang, Wen

    2017-07-01

    The topological insulator has attracted increasing attention as a new state of quantum matter featured by the symmetry-protected edge states. Although the qualitative robustness of the edge states against local perturbations has been well established, it is not clear how these topological edge states respond quantitatively to a global perturbation. Here, we study the response of topological edge states in a HgTe quantum dot to an external in-plane electric field—a paradigmatic global perturbation in solid-state environments. We find that the stability of the topological edge state could be larger than that of the ground bulk state by several orders of magnitudes. This robustness may be verified by standard transport measurements in the Coulomb blockage regime. Our work may pave the way towards utilizing these topological edge states as stable memory devices for charge and/or spin information and stable emitter of single terahertz photons or entangled terahertz photon pairs for quantum communication.

  10. Two-electron states in double quantum dot in direct electric field

    International Nuclear Information System (INIS)

    Burdov, V.A.

    2001-01-01

    One determined analytically the wave functions of stationary states and the spectrum of two-electron system in symmetric binary quantum point. It is shown that in the normal state at the absence of external electric field the electrons due to the Coulomb blockade can not be collectively in one quantum point. In the external electric field the situation changes. When a certain critical value of field intensity is reached the probability of detection of both electrons in one quantum point by a jump increases from zero up to 1 [ru

  11. Transient and steady-state analyses of an electrically heated Topaz-II Thermionic Fuel Element

    International Nuclear Information System (INIS)

    El-Genk, M.S.; Xue, H.

    1992-01-01

    Transient and steady-state analyses of electrically heated, Thermionic Fuel Elements (TFEs) for Topaz-II space power system are performed. The calculated emitter and collector temperatures, load electric power and conversion efficiency are in good agreement with reported data. In this paper the effects or Cs pressure, thermal power input, and load resistance on the steady-state performance of the TFE are also investigated. In addition, the thermal response of the ZrH moderator during a startup transient and following a change in the thermal power input is examined

  12. The challenges of a good use of electricity: China, United States, India and the European Union

    International Nuclear Information System (INIS)

    Dessus, B.; Laponche, B.

    2011-01-01

    After a discussion of the peculiar characteristics of electricity as energy vector (electricity production, transport and distribution, usages, the issue of load curves and power), this report identifies and discusses criteria corresponding to a 'good use' of electricity. These criteria are related to several issues: greenhouse gas emissions, availability and costs of natural resources, safety, local and global environment, economical and social issues. These issues are addressed through the examination of electricity consumption in China and India, of its evolution in comparison with two other regions (United States and Europe). A third part discusses opportunities and perspectives of a good use of electricity in China and India, in the main socio-economic sectors, and their consequences for the environment, for the preservation of natural resources, and for the Indian and Chinese economy. These aspects are also addressed in comparison with the United States and Europe. Thus, the authors highlight the contrast between the electricity consumption curves for some sectors depending on strategic choices by the Chinese and Indian governments

  13. Overview of the electricity and gas markets in the United States

    International Nuclear Information System (INIS)

    Speyer, J.M.

    1998-01-01

    The driving forces behind electricity and gas restructuring in the United States are primarily economic. Restructuring legislation regarding the electric power industry has been enacted in fourteen states, and similar legislation is under consideration in most other states. Currently, only three states do not have a significant restructuring plan. With regard to natural gas, market restructuring of the entire gas market is underway in five states, and studies or limited utility retail unbundling pilot programs are underway in seventeen others. It was predicted that restructuring will spread nationwide because once competition begins, it is hard to draw boundaries around it. Mergers are part of the restructuring process, providing firms with a scale that would allow them to undertake strategic initiatives. Convergence, on the other hand, is a response to the 'commoditization' of electricity and gas. As a development in the opposite direction, suppliers of electricity and gas are now attempting to 'decommoditize' their products by brand differentiation and other 'value added' services as a means of developing and retaining customer loyalty. 3 tabs., 2 figs

  14. Overview of the electricity and gas markets in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Speyer, J.M. [Putnam, Hayes and Bartlett Inc., Washington, DC (United States)

    1998-09-01

    The driving forces behind electricity and gas restructuring in the United States are primarily economic. Restructuring legislation regarding the electric power industry has been enacted in fourteen states, and similar legislation is under consideration in most other states. Currently, only three states do not have a significant restructuring plan. With regard to natural gas, market restructuring of the entire gas market is underway in five states, and studies or limited utility retail unbundling pilot programs are underway in seventeen others. It was predicted that restructuring will spread nationwide because once competition begins, it is hard to draw boundaries around it. Mergers are part of the restructuring process, providing firms with a scale that would allow them to undertake strategic initiatives. Convergence, on the other hand, is a response to the `commoditization` of electricity and gas. As a development in the opposite direction, suppliers of electricity and gas are now attempting to `decommoditize` their products by brand differentiation and other `value added` services as a means of developing and retaining customer loyalty. 3 tabs., 2 figs.

  15. The changing role of the State in the expansion of electricity supply in Latin America

    International Nuclear Information System (INIS)

    Batlle, Carlos; Perez-Arriaga, Ignacio J.; Barroso, Luiz A.

    2010-01-01

    Throughout the history of the electricity industry, regulatory reform has been driven by the pursuit of tools able to create conditions that would favour infrastructure investment and, generally, to surmount the obstacles that hinder system expansion. This article addresses the interaction between regulatory schemes and electric power generation investment, with a review of the changing role of the State in the expansion of electricity supply in Latin America. It contains a critical assessment of changes in the regulatory framework since the outset of electric power market reform, describing the successive approaches to regulation adopted in the last three decades. The aim of this analysis is to help identify the key factors underlying the evolution of energy policies and to contribute to the formulation of a prospective view of the direction this evolution may reasonably be expected to take. (author)

  16. Incorporating energy efficiency into electric power transmission planning: A western United States case study

    International Nuclear Information System (INIS)

    Barbose, Galen L.; Sanstad, Alan H.; Goldman, Charles A.

    2014-01-01

    Driven by system reliability goals and the need to integrate significantly increased renewable power generation, long-range, bulk-power transmission planning processes in the United States are undergoing major changes. At the same time, energy efficiency is an increasing share of the electricity resource mix in many regions, and has become a centerpiece of many utility resource plans and state policies as a means of meeting electricity demand, complementing supply-side sources, and reducing carbon dioxide emissions from the electric power system. The paper describes an innovative project in the western United States to explicitly incorporate end-use efficiency into load forecasts – projections of electricity consumption and demand – that are a critical input into transmission planning and transmission planning studies. Institutional and regulatory background and context are reviewed, along with a detailed discussion of data sources and analytical procedures used to integrate efficiency into load forecasts. The analysis is intended as a practical example to illustrate the kinds of technical and institutional issues that must be addressed in order to incorporate energy efficiency into regional transmission planning activities. - Highlights: • Incorporating energy efficiency into electric power transmission planning is an emergent analytical and policy priority. • A new methodology for this purpose was developed and applied in the western U.S. transmission system. • Efficiency scenarios were created and incorporated into multiple load forecasts. • Aggressive deployment of efficiency policies and programs can significantly reduce projected load. • The approach is broadly applicable in long-range transmission planning

  17. Testing the equation of state and electrical conductivity of copper by the electrical wire explosion in air: Experiment and magnetohydrodynamic simulation

    International Nuclear Information System (INIS)

    Barysevich, A. E.; Cherkas, S. L.

    2011-01-01

    We perform experiments on testing the equations of state and electrical conductivity of copper in three different regimes of copper wire electrical explosion, when the inserted energy (i) is slightly exceeded, (ii) is approximately equal, and (iii) is substantially exceeded the energy needed for the wire complete evaporation. Magnetohydrodynamic simulation is performed. The results predicted by the two different equations of state are compared with the experiment. Empirical expression for the copper electrical conductivity is presented. Parameters in this expression is fit on every of two equations of state. Map of copper conductivity is plotted.

  18. Decarbonization of the U.S. electricity sector: Are state energy policy portfolios the solution?

    International Nuclear Information System (INIS)

    Carley, Sanya

    2011-01-01

    State governments have taken the lead on U.S. energy and climate policy. It is not yet clear, however, whether state energy policy portfolios can generate results in a similar magnitude or manner to their presumed carbon mitigation potential. This article seeks to address this lack of policy evidence and contribute empirical insights on the carbon mitigation effects of state energy portfolios within the U.S. electricity sector. Using a dynamic, long-term electricity dispatch model with U.S. power plant, utility, and transmission and distribution data between 2010 and 2030, this analysis builds a series of state-level policy portfolio scenarios and performs a comparative scenario analysis. Results reveal that state policy portfolios have modest to minimal carbon mitigation effects in the long run if surrounding states do not adopt similar portfolios as well. The difference in decarbonization potential between isolated state policies and larger, more coordinated policy efforts is due in large part to carbon leakage, which is the export of carbon intensive fossil fuel-based electricity across state lines. Results also confirm that a carbon price of $50/metric ton CO 2 e can generate substantial carbon savings. Although both policy options - an energy policy portfolio or a carbon price - are effective at reducing carbon emissions in the present analysis, neither is as effective alone as when the two strategies are combined. - Research highlights: → Scenario modeling exercise to assess effectiveness of state energy policy portfolios. → Regional coordination has greater decarbonization potential than state policies. → Some states benefit more from regional policy coordination than others. → Emissions leakage attenuates the effect of isolated state policy portfolios. → Carbon price with coordinated energy portfolio has greatest decarbonization potential.

  19. Brain state-dependence of electrically evoked potentials monitored with head-mounted electronics.

    Science.gov (United States)

    Richardson, Andrew G; Fetz, Eberhard E

    2012-11-01

    Inferring changes in brain connectivity is critical to studies of learning-related plasticity and stimulus-induced conditioning of neural circuits. In addition, monitoring spontaneous fluctuations in connectivity can provide insight into information processing during different brain states. Here, we quantified state-dependent connectivity changes throughout the 24-h sleep-wake cycle in freely behaving monkeys. A novel, head-mounted electronic device was used to electrically stimulate at one site and record evoked potentials at other sites. Electrically evoked potentials (EEPs) revealed the connectivity pattern between several cortical sites and the basal forebrain. We quantified state-dependent changes in the EEPs. Cortico-cortical EEP amplitude increased during slow-wave sleep, compared to wakefulness, while basal-cortical EEP amplitude decreased. The results demonstrate the utility of using portable electronics to document state-dependent connectivity changes in freely behaving primates.

  20. New Modeling of Steady-State Modes of Complex Electrical Grids of Power Systems

    Directory of Open Access Journals (Sweden)

    Akhmetbayev Arman

    2018-01-01

    Full Text Available Classical methods for modeling the steady-state modes of complex electrical networks and systems are based on the application of nonlinear node equations. Nonlinear equations are solved by iterative methods, which are connected by known difficulties. To a certain extent, these difficulties can be weakened by applying topological methods. In this paper, we outline the theoretical foundations for the formation of the inverse form of nodal stress equations based on the topology of electrical networks and systems. A new topological method for calculating the distribution coefficients of node currents is proposed based on all possible trees of a directed graph of a complex electrical network. A complex program for calculating current distribution coefficients and forming steady-state parameters in the MATLAB environment has been developed.

  1. From franchise to state commission: Regulation of the electric utility industry, 1907 to 1932

    Science.gov (United States)

    Reutter, Keith Alan

    1997-09-01

    Empirical research into the effects of regulation on industry has been around since the early 1960s. Over the last thirty plus years a number of interesting results have been brought to the fore. For instance, it has been found that regulation of the trucking industry limits entry and increases prices. A similar result has been pointed to in other industries such as commercial airlines and banking. The effect of the state commission form of regulation on the electric utility industry has been less conclusive. State commissions became dominant during the period 1910-1930, replacing local franchising as a method of regulating the electric utility industry. Two competing theories suggest why this transformation took place, the "capture" and "public interest" theories of regulation. The capture theory of regulation suggests that the electric utility industry demanded state regulation as a way to earn above normal profits and reduce competition. The public interest theory suggests the purpose of regulation by state commissions was to benefit the general public by forcing the industry to be competitive. Few studies have tried to determine which theory more aptly describes the actual events that took place. The empirical model developed in Chapter V, is an extension of the current literature. A set of simultaneous equations describing the natural gas and electricity markets is estimated using cross-sectional time-series data from 1907 to 1932. The effect of regulation on the electric utility industry is modeled with a dummy variable taking on a value of one to designate that a state commission had been established. The results suggest the capture theory of regulation best describes the period under study. The empirical estimates indicate that state commissions (1) reduced the rate at which the real price of electricity was falling, (2) had a negative impact on firms entering the industry, (3) had a positive influence on the cost of producing a kwh of electricity, and (4

  2. D. C. electric field behavior of high lying states in atomic uranium

    International Nuclear Information System (INIS)

    Paisner, J.A.; Carlson, L.R.; Worden, E.F.; Johnson, S.A.; May, C.A.; Solarz, R.W.

    1976-01-01

    The effects of D. C. electric fields on high lying Rydberg and valence states in atomic uranium have been studied. Results of measurements of Stark shifts, lifetime lengthening via l-mixing, critical fields for ionization, barrier tunneling, and the appearance of zero-field parity forbidden transitions are presented for atomic uranium along with the observation of field induced autoionization of valence states. 3 figs

  3. State Regulatory responses to acid rain: Implications for electric utility operations

    International Nuclear Information System (INIS)

    Nagelhout, M.

    1990-01-01

    This article discusses the state regulatory responses to acid rain legislation and how this will affect electric utility operations. Topics discusses include planning and fuel procurement practices, least-cost planning, long-term supply contracts, fuel mix, cogeneration and small power production, qualifying facility contracts, avoided costs, environmental impact, lobbying expense, bill inserts, and forecasting models

  4. Annual report 2000 of COPEL - Electrical Company of Parana State, Brazil

    International Nuclear Information System (INIS)

    2000-01-01

    The annual report of COPEL - Electrical Company of Parana State, Brazil, during the calendar year of 2003 is presented, comprising: a management report, portraying the Company's accomplishments during the year in connection with its core businesses and a social balance sheet, addressing the Company's efforts to contribute to the development and well-being of the community by means of socially oriented projects

  5. The Ontario Energy Board's proposed new mandate

    International Nuclear Information System (INIS)

    Laughren, F.

    1998-01-01

    The Ontario Energy Board's proposed new mandate was reviewed. The role of the Board will be to regulate the monopoly delivery components of the electricity and natural gas industry and to smooth the transition to competition. The Board will monitor market performance and will encourage electricity and natural gas monopoly services to be compatible where possible. The Board will also assist local restructuring efforts when called upon do so and ensure that the marketplace operates efficiently and effectively. Gas marketers' licensing is scheduled to begin in early 1999. Licenses will also apply to the electric industry. The objectives of the proposed licensing, the regulatory requirements and the proposed regulatory approach are described

  6. Method and system employing finite state machine modeling to identify one of a plurality of different electric load types

    Science.gov (United States)

    Du, Liang; Yang, Yi; Harley, Ronald Gordon; Habetler, Thomas G.; He, Dawei

    2016-08-09

    A system is for a plurality of different electric load types. The system includes a plurality of sensors structured to sense a voltage signal and a current signal for each of the different electric loads; and a processor. The processor acquires a voltage and current waveform from the sensors for a corresponding one of the different electric load types; calculates a power or current RMS profile of the waveform; quantizes the power or current RMS profile into a set of quantized state-values; evaluates a state-duration for each of the quantized state-values; evaluates a plurality of state-types based on the power or current RMS profile and the quantized state-values; generates a state-sequence that describes a corresponding finite state machine model of a generalized load start-up or transient profile for the corresponding electric load type; and identifies the corresponding electric load type.

  7. Implications of water constraints for electricity capacity expansion in the United States

    Science.gov (United States)

    Liu, L.; Hejazi, M. I.; Iyer, G.; Forman, B. A.

    2017-12-01

    U.S. electricity generation is vulnerable to water supply since water is required for cooling. Constraints on the availability of water will therefore necessitate adaptive planning by the power generation sector. Hence, it is important to integrate restrictions in water availability in electricity capacity planning in order to better understand the economic viability of alternative capacity planning options. The study of the implications of water constraints for the U.S. power generation system is limited in terms of scale and robustness. We extend previous studies by including physical water constraints in a state-level model of the U.S. energy system embedded within a global integrated assessment model (GCAM-USA). We focus on the implications of such constraints for the U.S. electricity capacity expansion, integrating both supply and demand effects under a consistent framework. Constraints on the availability of water have two general effects across the U.S. First, water availability constraints increase the cost of electricity generation, resulting in reduced electrification of end-use sectors. Second, water availability constraints result in forced retirements of water-intensive technologies such as thermoelectric coal- and gas- fired technologies before the end of their natural lifetimes. The demand for electricity is then met by an increase in investments in less water-dependent technologies such as wind and solar photovoltaic. Our results show that the regional patterns of the above effects are heterogeneous across the U.S. In general, the impacts of water constraints on electricity capacity expansion are more pronounced in the West than in the East. This is largely because of lower water availability in the West compared to the East due to lower precipitation in the Western states. Constraints on the availability of water might also have important implications for U.S. electricity trade. For example, under severe constraints on the availability of water

  8. Type A Accident Investigation Board report on the January 17, 1996, electrical accident with injury in Technical Area 21 Tritium Science and Fabrication Facility Los Alamos National Laboratory. Final report

    International Nuclear Information System (INIS)

    1996-04-01

    An electrical accident was investigated in which a crafts person received serious injuries as a result of coming into contact with a 13.2 kilovolt (kV) electrical cable in the basement of Building 209 in Technical Area 21 (TA-21-209) in the Tritium Science and Fabrication Facility (TSFF) at Los Alamos National Laboratory (LANL). In conducting its investigation, the Accident Investigation Board used various analytical techniques, including events and causal factor analysis, barrier analysis, change analysis, fault tree analysis, materials analysis, and root cause analysis. The board inspected the accident site, reviewed events surrounding the accident, conducted extensive interviews and document reviews, and performed causation analyses to determine the factors that contributed to the accident, including any management system deficiencies. Relevant management systems and factors that could have contributed to the accident were evaluated in accordance with the guiding principles of safety management identified by the Secretary of Energy in an October 1994 letter to the Defense Nuclear Facilities Safety Board and subsequently to Congress

  9. Type A Accident Investigation Board report on the January 17, 1996, electrical accident with injury in Technical Area 21 Tritium Science and Fabrication Facility Los Alamos National Laboratory. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    An electrical accident was investigated in which a crafts person received serious injuries as a result of coming into contact with a 13.2 kilovolt (kV) electrical cable in the basement of Building 209 in Technical Area 21 (TA-21-209) in the Tritium Science and Fabrication Facility (TSFF) at Los Alamos National Laboratory (LANL). In conducting its investigation, the Accident Investigation Board used various analytical techniques, including events and causal factor analysis, barrier analysis, change analysis, fault tree analysis, materials analysis, and root cause analysis. The board inspected the accident site, reviewed events surrounding the accident, conducted extensive interviews and document reviews, and performed causation analyses to determine the factors that contributed to the accident, including any management system deficiencies. Relevant management systems and factors that could have contributed to the accident were evaluated in accordance with the guiding principles of safety management identified by the Secretary of Energy in an October 1994 letter to the Defense Nuclear Facilities Safety Board and subsequently to Congress.

  10. Jumping magneto-electric states of electrons in semiconductor multiple quantum wells

    International Nuclear Information System (INIS)

    Pfeffer, Pawel; Zawadzki, Wlodek

    2011-01-01

    Orbital and spin electron states in semiconductor multiple quantum wells in the presence of an external magnetic field transverse to the growth direction are considered. Rectangular wells of GaAs/GaAlAs and InAs/AlSb are taken as examples. It is shown that, in addition to magneto-electric states known from one-well systems, there appear magneto-electric states having a much stronger dependence of energies on a magnetic field and exhibiting an interesting anti-crossing behavior. The origin of these states is investigated and it is shown that the strong field dependence of the energies is related to an unusual 'jumping' behavior of their wavefunctions between quantum wells as the field increases. The ways of investigating the jumping states by means of interband magneto-luminescence transitions or intraband cyclotron-like transitions are considered and it is demonstrated that the jumping states can be observed. The spin g factors of electrons in the jumping states are calculated using the real values of the spin–orbit interaction and bands' nonparabolicity for the semiconductors in question. It is demonstrated that the jumping states offer a wide variety of the spin g factors

  11. Dynamic state estimation techniques for large-scale electric power systems

    International Nuclear Information System (INIS)

    Rousseaux, P.; Pavella, M.

    1991-01-01

    This paper presents the use of dynamic type state estimators for energy management in electric power systems. Various dynamic type estimators have been developed, but have never been implemented. This is primarily because of dimensionality problems posed by the conjunction of an extended Kalman filter with a large scale power system. This paper precisely focuses on how to circumvent the high dimensionality, especially prohibitive in the filtering step, by using a decomposition-aggregation hierarchical scheme; to appropriately model the power system dynamics, the authors introduce new state variables in the prediction step and rely on a load forecasting method. The combination of these two techniques succeeds in solving the overall dynamic state estimation problem not only in a tractable and realistic way, but also in compliance with real-time computational requirements. Further improvements are also suggested, bound to the specifics of the high voltage electric transmission systems

  12. Electric and magnetic field reduction and research: A report to the Washington State Legislature

    International Nuclear Information System (INIS)

    Geissinger, L.G.; Waller, P.; Chartier, V.L.; Olsen, R.G.

    1993-01-01

    Increasingly, citizens of Washington State are expressing their concerns about possible adverse health effects of electric and magnetic fields (EMF) from electric utility power systems. A number of legislative proposals over the past several years have prompted governmental officials to evaluate available options for reducing electric and magnetic field strengths surrounding these systems (with a concentration on magnetic fields) or otherwise manage public exposure to power lines by increasing land use controls and setbacks for new development. Unsuccessful proposals brought before the Washington Legislature include 2 mG magnetic field limits for new transmission lines at the right-of-way edge; a temporary moratorium on transmission construction; requirements for providing public information on EMF; and expansion of the role of state governmental agencies in transmission siting and design. A successful Whatcom County initiative limits the voltage of new transmission to 115 kV in all but industrial land use zones, an action likely to have an unintended outcome of increasing magnetic fields in some areas. It is clear that better communication is needed about possible options for EMF management, costs and consequences, despite the fact scientific evidence on the existence of human health effects is inconclusive. This paper describes the work that Washington State undertook in 1990-92 in response to Engrossed Substitute Senate Bill 6771 establishing the Electric Transmission Research Needs Task Force. The Task Force was directed to report to the Legislature on possible exposure reduction methods; recommending engineering research that could lead to more effective approaches in the future

  13. Magnetic and electric dipole moments of the H 3Δ1 state in ThO

    International Nuclear Information System (INIS)

    Vutha, A. C.; Kirilov, E.; DeMille, D.; Spaun, B.; Gurevich, Y. V.; Hutzler, N. R.; Doyle, J. M.; Gabrielse, G.

    2011-01-01

    The metastable H 3 Δ 1 state in the thorium monoxide (ThO) molecule is highly sensitive to the presence of a CP-violating permanent electric dipole moment of the electron (eEDM) [E. R. Meyer and J. L. Bohn, Phys. Rev. A 78, 010502 (2008)]. The magnetic dipole moment μ H and the molecule-fixed electric dipole moment D H of this state are measured in preparation for a search for the eEDM. The small magnetic moment μ H =8.5(5)x10 -3 μ B displays the predicted cancellation of spin and orbital contributions in a 3 Δ 1 paramagnetic molecular state, providing a significant advantage for the suppression of magnetic field noise and related systematic effects in the eEDM search. In addition, the induced electric dipole moment is shown to be fully saturated in very modest electric fields (<10 V/cm). This feature is favorable for the suppression of many other potential systematic errors in the ThO eEDM search experiment.

  14. Impact of electric vehicles in the steady state operation of distribution systems

    OpenAIRE

    Erasmo Saraiva de Castro

    2015-01-01

    This work aims to quantify the impact in the steady state operation of a distribution system when electric vehicles are connected. It is worth noting that the connection of them may cause significant changes in the voltage profile, in the degree of voltage unbalance and in the electrical losses of the system. In order to make this analysis, a three-phase power flow program was developed in MATLAB language. This program is based on the Ladder Iterative Technique and it contains models of overh...

  15. Projected costs of nuclear and conventional base load electricity generation in some IAEA Member States

    International Nuclear Information System (INIS)

    1990-09-01

    The cost of nuclear and conventional electricity is one of the most important parameters for power system planning, and in particular for decisions on base load power projects. This study reviews the projected levelized electricity generation costs of the base load power generation options expected to be available in the medium term, using an agreed common economic methodology. Cost projections were obtained and evaluated for nuclear and fossil fuelled (mainly coal-fired) plants that could be commissioned in the mid- to late 1990s in 10 IAEA Member States. 27 refs, figs and tabs

  16. Value orientation and framing as determinants of stated willingness to pay for eco-labeled electricity

    Energy Technology Data Exchange (ETDEWEB)

    Hansla, A. [Department of Psychology, University of Gothenburg, P.O. Box 500, 40530 Goeteborg (Sweden)

    2011-03-15

    In the context of a survey, an experiment examined how egoistic, altruistic, and biospheric framing of consequences influence stated willingness to pay (SWTP) for eco-labeled electricity. The results for a random sample of 476 Swedish residents showed that SWTP decreases linearly with size of the surcharge for eco-labeled electricity, that SWPT is higher for biospheric framing than for altruistic and egoistic framing, and that SWPT does not differ for altruistic and egoistic framing. A higher SWPT is also observed for individuals with a self-transcendence value orientation than for individuals with a self-enhancement value orientation.

  17. Development of the electric power system in Macedonia - past, present, future state

    International Nuclear Information System (INIS)

    1996-01-01

    The first part presents an overview of the chronological development of the Electric Power System (EPS) of Macedonia. The second part is dedicated to its present situation and to the actual operation conditions and problems in this regard. The third part describes the development engagements. These engagements are directed on one hand, towards finding solutions for the energy conditions in the next 5-10 years and, on the other hand, towards the preparation of the electrical plants and objects for the next 25-40 years, which are determined by various development parameters for the general and industrial progress of the state. (author)

  18. Distributional impacts of state-level energy efficiency policies in regional electricity markets

    International Nuclear Information System (INIS)

    Sahraei-Ardakani, Mostafa; Blumsack, Seth; Kleit, Andrew

    2012-01-01

    A number of U.S. states have passed legislation targeting energy efficiency and peak demand reduction. We study one such state, Pennsylvania, within the context of PJM, a regional electricity market covering numerous different states. Our focus is on the distributive impacts of this policy—specifically how the policy is likely to impact electricity prices in different areas of Pennsylvania and in the PJM market more generally. Such spatial differences in policy impacts are difficult to model and the transmission system is often ignored in policy studies. Our model estimates supply curves on a “zonal” basis within regional electricity markets and yields information on price and fuel utilization within each zone. We use the zonal supply curves estimated by our model to study regional impacts of energy-efficiency legislation on utilities both inside and outside of Pennsylvania. For most utilities in Pennsylvania, it would reduce the influence of natural gas on electricity price formation and increase the influence of coal. It would also save 2.1 to 2.8 percent of total energy cost in Pennsylvania in a year similar to 2009. The savings are lower than 0.5 percent in other PJM states and the prices may slightly increase in Washington, DC area. - Highlights: ► We model distributional impacts of energy efficiency and conservation policies. ► We use our model to study the impacts of Pennsylvania act 129. ► We estimate $235 million in annual savings for PA and $275 million for PJM. ► The prices decrease in most of the zones but the impacts are not uniform. ► The influence of coal on electricity prices increases relative to natural gas.

  19. Phosphorylation states of the (Na+ + K+)-transporting ATPase in preparations from lamb kidney and electric-eel (Electophorus electricus) electric organ.

    Science.gov (United States)

    Harris, W E; Stahl, W L

    1984-01-01

    Phosphorylation states of the (Na+ + K+)-transporting ATPase were studied in highly purified preparations isolated from electric-eel electric organ and from lamb kidney. The steady-state level of phosphorylated lamb kidney enzyme, obtained by reaction with [gamma-32P]ATP, was not appreciably reduced in the presence of ADP unless oligomycin was present. The phosphorylated form of the electric-eel electric-organ enzyme was reduced by at least 95% under the same conditions, suggesting that the E1P state in the kidney enzyme is more transitory than that in electric organ. The level of phosphorylation from [32P]Pi was higher in the lamb kidney preparation than in the electric-organ preparation, and the difference in stimulation of phosphorylation by ouabain in the two preparations was striking. Ouabain increased the level of phosphorylation by 35% in the kidney preparation and 734% in the electric-organ preparation. The E2P state seems to be stabilized by ouabain in the latter preparation. These findings, as well as the different reactivities of the thiol groups to blocking reagents in these preparations, suggest that the tertiary structure in the enzyme isolated from these two sources is different. PMID:6324756

  20. Electricity

    International Nuclear Information System (INIS)

    Tombs, F.

    1983-01-01

    The subject is discussed, with particular reference to the electricity industry in the United Kingdom, under the headings; importance and scope of the industry's work; future fuel supplies (estimated indigenous fossil fuels reserves); outlook for UK energy supplies; problems of future generating capacity and fuel mix (energy policy; construction programme; economics and pricing; contribution of nuclear power - thermal and fast reactors; problems of conversion of oil-burning to coal-burning plant). (U.K.)

  1. State-of-the-art research: optimal investment in market-based electric power systems

    Energy Technology Data Exchange (ETDEWEB)

    Hope, Einar; Skjeret, Frode

    2008-04-15

    The purpose of this state-of-the-art research paper is to surveying the literature on investment in market based electric power systems as a background for identifying and discussing some important issues in the optimal design and operation of such systems. A fundamental distinction has to be made between investment in the competitive part of the power system (generation and trading) on the one hand and the natural monopoly part (network infrastructure) on the other. The paper starts with a listing and discussion on market characteristics and properties of electric power and goes on to discussing performance criteria and potential sources of market failure for optimal electric power investment. After the literature survey there is a discussion of conditions under which optimal investment may occur. (author). 78 refs., figs

  2. Electric automation history and state of the art; Historia da automacao eletrica e estado da arte

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, M.F. [Itaipu Binacional, Foz do Iguacu, PR (Brazil). Div. de Engenharia Eletronica e Sistemas de Controle], E-mail: mendes@ieee.org; Jardini, J.A. [Universidade de Sao Paulo (PEA/EP/USP), SP (Brazil). Escola Politecnica. Dept. de Engenharia de Energia e Automacao Eletricas], E-mail: jardini@pea.usp.br

    2009-07-01

    The article summarizes the history of electric systems automation, used in hydroelectric power plants, since the rise to the present day. Technologies are presented employed at various times, developments, the difference and the reasons for evolution. The emphasis is on today's modern systems technology, covering: communication, standardization, hardware, software, architecture, maintenance, operation and challenges. This work pretend to give subsidies for the design and implementation of automation systems electricity using state of the art. The scope are the new plants as well as those being modernized. Knowledge of history is important to investigate, to plan and evaluate the costs and benefits of automation systems for new electric plants and those that are undergoing processes technological upgrading.

  3. Economic impacts of electricity liberalization on the status of nuclear power generation in the United States

    International Nuclear Information System (INIS)

    Hattori, Toru

    2015-01-01

    This paper discusses the economic impact of electricity liberalization on the status of nuclear power generation in the United States. Nuclear power plants have been treated equally with other types of power plants in the liberalized electricity market. The existing nuclear power plants were thought to be competitive in liberalized wholesale electricity market. Competitive pressure from the market also facilitated efficiency improvement among the existing nuclear power plants. Although it was difficult to build new reactor, the U.S. nuclear power generators expanded capacity through up rates. In recent years, however, nuclear power plants suffer from the decline in wholesale power prices and some of them are forced to retire early. Although there are some market design issues that could be improved to maintain the efficient nuclear power plants in competitive environment, it is now argued that some additional arrangements to mitigate the investment risks of the nuclear power plants are necessary. (author)

  4. Change in consumer sensitivity to electricity prices in response to retail deregulation: A panel empirical analysis of the residential demand for electricity in the United States

    International Nuclear Information System (INIS)

    Nakajima, Tadahiro; Hamori, Shigeyuki

    2010-01-01

    About ten years have passed since the deregulation of the U.S. retail electricity market, and it is now generally accepted that the available data is adequate to quantitatively assess and compare conditions before and after deregulation. This study, therefore, estimates the changes in price elasticity in the residential electricity market to examine the changes, if any, in household sensitivity (as a result of retail electricity market deregulation policies) to residential electricity rates. Specifically, six types of panel data are prepared, based on three cross-sections-all states (except for Alaska and Hawaii) and the District of Columbia, deregulated states, and non-deregulated states-and two time series-the period before deregulation and the period after deregulation. The panel empirical analysis techniques are used to determine whether or not the variables are stationary, and to estimate price elasticity. We find that there is no substantial difference in the price elasticity between deregulated and non-deregulated states for both periods-before deregulation and after deregulation. Thus, it can be said that the deregulation of the retail electricity market has not made consumers more sensitive to electricity rates and that retail deregulation policies are not the cause of price elasticity differences between deregulated and non-deregulated states.

  5. Change in consumer sensitivity to electricity prices in response to retail deregulation. A panel empirical analysis of the residential demand for electricity in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Nakajima, Tadahiro [The Kansai Electric Power Company, Incorporated, 6-16, Nakanoshima 3-chome, Kita-Ku, Osaka 530-8270 (Japan); Hamori, Shigeyuki [Faculty of Economics, Kobe University 2-1, Rokkodai, Nada-Ku, Kobe 657-8501 (Japan)

    2010-05-15

    About ten years have passed since the deregulation of the U.S. retail electricity market, and it is now generally accepted that the available data is adequate to quantitatively assess and compare conditions before and after deregulation. This study, therefore, estimates the changes in price elasticity in the residential electricity market to examine the changes, if any, in household sensitivity (as a result of retail electricity market deregulation policies) to residential electricity rates. Specifically, six types of panel data are prepared, based on three cross-sections - all states (except for Alaska and Hawaii) and the District of Columbia, deregulated states, and non-deregulated states - and two time series - the period before deregulation and the period after deregulation. The panel empirical analysis techniques are used to determine whether or not the variables are stationary, and to estimate price elasticity. We find that there is no substantial difference in the price elasticity between deregulated and non-deregulated states for both periods - before deregulation and after deregulation. Thus, it can be said that the deregulation of the retail electricity market has not made consumers more sensitive to electricity rates and that retail deregulation policies are not the cause of price elasticity differences between deregulated and non-deregulated states. (author)

  6. Regional Variability and Uncertainty of Electric Vehicle Life Cycle CO₂ Emissions across the United States.

    Science.gov (United States)

    Tamayao, Mili-Ann M; Michalek, Jeremy J; Hendrickson, Chris; Azevedo, Inês M L

    2015-07-21

    We characterize regionally specific life cycle CO2 emissions per mile traveled for plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs) across the United States under alternative assumptions for regional electricity emission factors, regional boundaries, and charging schemes. We find that estimates based on marginal vs average grid emission factors differ by as much as 50% (using National Electricity Reliability Commission (NERC) regional boundaries). Use of state boundaries versus NERC region boundaries results in estimates that differ by as much as 120% for the same location (using average emission factors). We argue that consumption-based marginal emission factors are conceptually appropriate for evaluating the emissions implications of policies that increase electric vehicle sales or use in a region. We also examine generation-based marginal emission factors to assess robustness. Using these two estimates of NERC region marginal emission factors, we find the following: (1) delayed charging (i.e., starting at midnight) leads to higher emissions in most cases due largely to increased coal in the marginal generation mix at night; (2) the Chevrolet Volt has higher expected life cycle emissions than the Toyota Prius hybrid electric vehicle (the most efficient U.S. gasoline vehicle) across the U.S. in nearly all scenarios; (3) the Nissan Leaf BEV has lower life cycle emissions than the Prius in the western U.S. and in Texas, but the Prius has lower emissions in the northern Midwest regardless of assumed charging scheme and marginal emissions estimation method; (4) in other regions the lowest emitting vehicle depends on charge timing and emission factor estimation assumptions.

  7. The Potential Economic Impact of Electricity Restructuring in the State of Oklahoma: Phase II Report; FINAL

    International Nuclear Information System (INIS)

    Hadley, SW

    2001-01-01

    In April 1997, the Oklahoma legislature passed a bill to restructure the state's electric industry, requiring that the generation sector be deregulated and allowing retail competition by July 2002. Details of the market structure were to be established later. Senate Bill No.220, introduced in the 2000 legislature, provided additional details on this market, but the bill did not pass. Subsequent discussions have identified the need for an objective analysis of the impact of restructuring on electricity prices and the state's economy, especially considering the experiences of other states following restructuring of their electric systems. Because of the recent experiences of other states undergoing restructuring (e.g., higher prices, greater volatility, lower reliability), concerns have been raised in states currently considering restructuring as to whether their systems are equally vulnerable. Factors such as local generation costs, transmission constraints, market concentration, and market design can all play a role in the success or failure of the market. Energy and ancillary services markets both play a role in having a well-functioning system. Customer responsiveness to market signals can enhance the flexibility of the market. The purpose of this project is to provide a model and process to evaluate the potential price and economic impacts of restructuring the Oklahoma electric industry. The goal is to provide sufficient objective analysis to the Oklahoma legislature that they may make a more informed decision on the timing and details of any future restructuring. It will also serve to inform other stakeholders on the economic issues surrounding restructuring. The project is being conducted in two phases. The Phase I report (Hadley 2001) concentrated on providing an analysis of the Oklahoma system in the near-term, using only present generation and transmission resources. This Phase II report looks further in the future, incorporating the potential of new

  8. Reliability of solid-state lighting electrical drivers subjected to WHTOL accelerated aging

    Energy Technology Data Exchange (ETDEWEB)

    Lall, Pradeep; Sakalauku, Peter; Davis, Lynn

    2014-05-27

    An investigation of a solid-state lighting (SSL) luminaire with the focus on the electronic driver which has been exposed to a standard wet hot temperature operating life (WHTOL) of 85% RH and 85°C in order to assess reliability of prolonged exposer to a harsh environment has been conducted. SSL luminaires are beginning introduced as head lamps in some of today's luxury automobiles and may also be fulfilling a variety of important outdoor applications such as overhead street lamps, traffic signals and landscape lighting. SSL luminaires in these environments are almost certain to encounter excessive moisture from humidity and high temperatures for a persistent period of time. The lack of accelerated test methods for LEDs to assess long-term reliability prior to introduction into the marketplace, a need for SSL physics based PHM modeling indicators for assessment and prediction of LED life, as well as the U.S. Department of Energy's R&D roadmap to replace todays lighting with SSL luminaires makes it important to increase the understanding of the reliability of SSL devices, specifically, in harsh environment applications. In this work, a set of SSL electrical drivers were investigated to determine failure mechanisms that occur during prolonged harsh environment applications. Each driver consists of four aluminum electrolytic capacitors (AECs) of three different types and was considered the weakest component inside the SSL electrical driver. The reliability of the electrical driver was assessed by monitoring the change in capacitance and the change in equivalent series resistance for each AEC, as well as monitoring the luminous flux of the SSL luminaire or the output of the electrical driver. The luminous flux of a pristine SSL electrical driver was also monitored in order to detect minute changes in the electrical drivers output and to aid in the investigation of the SSL luminaires reliability. The failure mechanisms of the electrical drivers have been

  9. Rejecting renewables: The socio-technical impediments to renewable electricity in the United States

    International Nuclear Information System (INIS)

    Sovacool, Benjamin K.

    2009-01-01

    If renewable power systems deliver such impressive benefits, why do they still provide only 3 percent of national electricity generation in the United States? As an answer, this article demonstrates that the impediments to renewable power are socio-technical, a term that encompasses the technological, social, political, regulatory, and cultural aspects of electricity supply and use. Extensive interviews of public utility commissioners, utility managers, system operators, manufacturers, researchers, business owners, and ordinary consumers reveal that it is these socio-technical barriers that often explain why wind, solar, biomass, geothermal, and hydroelectric power sources are not embraced. Utility operators reject renewable resources because they are trained to think only in terms of big, conventional power plants. Consumers practically ignore renewable power systems because they are not given accurate price signals about electricity consumption. Intentional market distortions (such as subsidies), and unintentional market distortions (such as split incentives) prevent consumers from becoming fully invested in their electricity choices. As a result, newer and cleaner technologies that may offer social and environmental benefits but are not consistent with the dominant paradigm of the electricity industry continue to face comparative rejection.

  10. Impacts of the 2011 Tohoku earthquake on electricity demand in Japan. State space approach

    International Nuclear Information System (INIS)

    Honjo, Keita; Ashina, Shuichi

    2017-01-01

    Some papers report that consumers' electricity saving behavior (Setsuden) after the 2011 Tohoku Earthquake resulted in the reduction of the domestic electricity demand. However, time variation of the electricity saving effect (ESE) has not yet been sufficiently investigated. In this study, we develop a state space model of monthly electricity demand using long-term data, and estimate time variation of the ESE. We also estimate time variation of CO_2 emissions caused by Setsuden. Our result clearly indicates that Setsuden after the earthquake was not temporary but became established as a habit. Between March 2011 and October 2015, the ESE on power demand ranged from 2.9% to 6.9%, and the ESE on light demand ranged from 2.6% to 9.0%. The ESE on the total electricity demand was 3.2%-7.5%. Setsuden also contributed to the reduction of CO_2 emissions, but it could not offset the emissions increase caused by the shutdown of nuclear power plants. (author)

  11. Rejecting renewables. The socio-technical impediments to renewable electricity in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Sovacool, Benjamin K. [Energy Governance Program, Centre on Asia and Globalisation, Lee Kuan Yew School of Public Policy, National University of Singapore (Singapore)

    2009-11-15

    If renewable power systems deliver such impressive benefits, why do they still provide only 3 percent of national electricity generation in the United States? As an answer, this article demonstrates that the impediments to renewable power are socio-technical, a term that encompasses the technological, social, political, regulatory, and cultural aspects of electricity supply and use. Extensive interviews of public utility commissioners, utility managers, system operators, manufacturers, researchers, business owners, and ordinary consumers reveal that it is these socio-technical barriers that often explain why wind, solar, biomass, geothermal, and hydroelectric power sources are not embraced. Utility operators reject renewable resources because they are trained to think only in terms of big, conventional power plants. Consumers practically ignore renewable power systems because they are not given accurate price signals about electricity consumption. Intentional market distortions (such as subsidies), and unintentional market distortions (such as split incentives) prevent consumers from becoming fully invested in their electricity choices. As a result, newer and cleaner technologies that may offer social and environmental benefits but are not consistent with the dominant paradigm of the electricity industry continue to face comparative rejection. (author)

  12. Rejecting renewables: The socio-technical impediments to renewable electricity in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Sovacool, Benjamin K., E-mail: bsovacool@nus.edu.s [Energy Governance Program, Centre on Asia and Globalisation, Lee Kuan Yew School of Public Policy, National University of Singapore (Singapore)

    2009-11-15

    If renewable power systems deliver such impressive benefits, why do they still provide only 3 percent of national electricity generation in the United States? As an answer, this article demonstrates that the impediments to renewable power are socio-technical, a term that encompasses the technological, social, political, regulatory, and cultural aspects of electricity supply and use. Extensive interviews of public utility commissioners, utility managers, system operators, manufacturers, researchers, business owners, and ordinary consumers reveal that it is these socio-technical barriers that often explain why wind, solar, biomass, geothermal, and hydroelectric power sources are not embraced. Utility operators reject renewable resources because they are trained to think only in terms of big, conventional power plants. Consumers practically ignore renewable power systems because they are not given accurate price signals about electricity consumption. Intentional market distortions (such as subsidies), and unintentional market distortions (such as split incentives) prevent consumers from becoming fully invested in their electricity choices. As a result, newer and cleaner technologies that may offer social and environmental benefits but are not consistent with the dominant paradigm of the electricity industry continue to face comparative rejection.

  13. State Electricity Regulatory Policy and Distributed Resources: Accommodating Distributed Resources in Wholesale Markets

    Energy Technology Data Exchange (ETDEWEB)

    Weston, F.; Harrington, C.; Moskovitz, D.; Shirley, W.; Cowart, R.; Sedano, R.

    2002-10-01

    Distributed resources can provide cost-effective reliability and energy services - in many cases, obviating the need for more expensive investments in wires and central station electricity generating facilities. Given the unique features of distributed resources, the challenge facing policymakers today is how to restructure wholesale markets for electricity and related services so as to reveal the full value that distributed resources can provide to the electric power system (utility grid). This report looks at the functions that distributed resources can perform and examines the barriers to them. It then identifies a series of policy and operational approaches to promoting DR in wholesale markets. This report is one in the State Electricity Regulatory Policy and Distributed Resources series developed under contract to NREL (see Annual Technical Status Report of the Regulatory Assistance Project: September 2000-September 2001, NREL/SR-560-32733). Other titles in this series are: (1) Distributed Resource Distribution Credit Pilot Programs - Revealing the Value to Consumers and Vendors, NREL/SR-560-32499; (2) Distributed Resources and Electric System Reliability, NREL/SR-560-32498; (3) Distribution System Cost Methodologies for Distributed Generation, NREL/SR-560-32500; (4) Distribution System Cost Methodologies for Distributed Generation Appendices, NREL/SR-560-32501

  14. [On the necessity to prepare new "Rules for the organization and conduction of forensic biological examination and studies by the State Forensic Examination Boards of the Russian Federation"].

    Science.gov (United States)

    Gusarov, A A

    2010-01-01

    The author substantiates the necessity to prepare new "Rules for the organization and conduction of forensic biological examination and studies by the State Forensic Examination Boards of the Russian Federation". Their long-term absence of the reviewed document has negatively influenced the quality of work of these facilities. The structure and contents of the three previous versions of the Rules for the study of material evidence (1934, 1956, and 1996) are analysed. The structure of the new variant is designed to optimize the work of forensic medical examination bureaus and the performance of relevant studies.

  15. Advisory Board on Alcoholism and Drug Abuse

    Science.gov (United States)

    State Employees Advisory Board on Alcoholism and Drug Abuse DHSS State of Alaska Home Divisions and ; Advisory Board on Alcoholism and Drug Abuse Page Content Alison Kulas Executive Director If you, a family Kulas Begins Tenure as Executive Director The Advisory Board on Alcoholism and Drug Abuse, The Alaska

  16. A novel Generalized State-Space Averaging (GSSA) model for advanced aircraft electric power systems

    International Nuclear Information System (INIS)

    Ebrahimi, Hadi; El-Kishky, Hassan

    2015-01-01

    Highlights: • A study model is developed for aircraft electric power systems. • A novel GSSA model is developed for the interconnected power grid. • The system’s dynamics are characterized under various conditions. • The averaged results are compared and verified with the actual model. • The obtained measured values are validated with available aircraft standards. - Abstract: The growing complexity of Advanced Aircraft Electric Power Systems (AAEPS) has made conventional state-space averaging models inadequate for systems analysis and characterization. This paper presents a novel Generalized State-Space Averaging (GSSA) model for the system analysis, control and characterization of AAEPS. The primary objective of this paper is to introduce a mathematically elegant and computationally simple model to copy the AAEPS behavior at the critical nodes of the electric grid. Also, to reduce some or all of the drawbacks (complexity, cost, simulation time…, etc) associated with sensor-based monitoring and computer aided design software simulations popularly used for AAEPS characterization. It is shown in this paper that the GSSA approach overcomes the limitations of the conventional state-space averaging method, which fails to predict the behavior of AC signals in a circuit analysis. Unlike conventional averaging method, the GSSA model presented in this paper includes both DC and AC components. This would capture the key dynamic and steady-state characteristics of the aircraft electric systems. The developed model is then examined for the aircraft system’s visualization and accuracy of computation under different loading scenarios. Through several case studies, the applicability and effectiveness of the GSSA method is verified by comparing to the actual real-time simulation model obtained from Powersim 9 (PSIM9) software environment. The simulations results represent voltage, current and load power at the major nodes of the AAEPS. It has been demonstrated that

  17. Electric-field induced spin accumulation in the Landau level states of topological insulator thin films

    Science.gov (United States)

    Siu, Zhuo Bin; Chowdhury, Debashree; Basu, Banasri; Jalil, Mansoor B. A.

    2017-08-01

    A topological insulator (TI) thin film differs from the more typically studied thick TI system in that the former has both a top and a bottom surface where the states localized at both surfaces can couple to one other across the finite thickness. An out-of-plane magnetic field leads to the formation of discrete Landau level states in the system, whereas an in-plane magnetization breaks the angular momentum symmetry of the system. In this work, we study the spin accumulation induced by the application of an in-plane electric field to the TI thin film system where the Landau level states and inter-surface coupling are simultaneously present. We show, via Kubo formula calculations, that the in-plane spin accumulation perpendicular to the magnetization due to the electric field vanishes for a TI thin film with symmetric top and bottom surfaces. A finite in-plane spin accumulation perpendicular to both the electric field and magnetization emerges upon applying either a differential magnetization coupling or a potential difference between the two film surfaces. This spin accumulation results from the breaking of the antisymmetry of the spin accumulation around the k-space equal-energy contours.

  18. 76 FR 4827 - High-Cost Universal Service Support and Federal-State Joint Board on Universal Service

    Science.gov (United States)

    2011-01-27

    ... ETCs in the state. DATES: Effective January 27, 2011. FOR FURTHER INFORMATION CONTACT: Kenneth Burnley... designation in the state, rather than redistributing the excess funding to other competitive ETCs in the state. Providing the excess support to other competitive ETCs in a state would not necessarily result in future...

  19. An economic analysis of the electricity generation potential from biogas resources in the state of Indiana

    Science.gov (United States)

    Giraldo, Juan S.

    Anaerobic digestion is a process that is a common part of organic waste management systems and is used in concentrated animal feeding operations (CAFOs), wastewater treatment plants (WWTPs), and municipal solid waste (MSW) landfills. The process produces biogas, which contains methane, and it can be burned to generate electricity. Previous reports have indicated that based on the availability of feedstocks there is a large potential for biogas production and use for electricity generation in the state of Indiana. However, these reports varied in their consideration of important factors that affect the technical and economic feasibility of being able to develop the resources available. The goal of this thesis is to make a more targeted assessment of the electricity generation potential from biogas resources at CAFOs, WWTPs, and MSW landfills in Indiana. A capital budgeting model is used to estimate the net present value (NPV) of biogas electricity projects at facilities that are identified as technically suitable. A statewide estimate of the potential generation capacity is made by estimating the number of facilities that could profitably undertake a biogas electricity project. In addition this thesis explored the impact that different incentive policies would have on the economic viability of these projects. The results indicated that the electricity generation potential is much smaller when technical and economic factors are taken into account in addition to feedstock availability. In particular it was found that projects at hog farms are unlikely to be economically feasible in the present even when financial incentives are considered. In total, 47.94 MW of potential generating capacity is estimated from biogas production at CAFOs, WWTPs, and MSW landfills. Though results indicated that 37.10 MW of capacity are economically feasible under current operating conditions, sensitivity analysis reveals that these projects are very sensitive to capital cost assumptions

  20. Stark tuning and electrical charge state control of single divacancies in silicon carbide

    Science.gov (United States)

    de las Casas, Charles F.; Christle, David J.; Ul Hassan, Jawad; Ohshima, Takeshi; Son, Nguyen T.; Awschalom, David D.

    2017-12-01

    Neutrally charged divacancies in silicon carbide (SiC) are paramagnetic color centers whose long coherence times and near-telecom operating wavelengths make them promising for scalable quantum communication technologies compatible with existing fiber optic networks. However, local strain inhomogeneity can randomly perturb their optical transition frequencies, which degrades the indistinguishability of photons emitted from separate defects and hinders their coupling to optical cavities. Here, we show that electric fields can be used to tune the optical transition frequencies of single neutral divacancy defects in 4H-SiC over a range of several GHz via the DC Stark effect. The same technique can also control the charge state of the defect on microsecond timescales, which we use to stabilize unstable or non-neutral divacancies into their neutral charge state. Using fluorescence-based charge state detection, we show that both 975 nm and 1130 nm excitation can prepare their neutral charge state with near unity efficiency.

  1. Electricity

    Indian Academy of Sciences (India)

    Michael Faraday of England and Joseph Henry of the United. States are the .... frequency to be generated is f Hz, the number of poles required .... it would seem there is a very good reason to choose high frequency power generation. (In fact.

  2. Hydropower Impacts on Electrical System Production Costs in the Southwest United States

    Directory of Open Access Journals (Sweden)

    Dominique M. Bain

    2018-02-01

    Full Text Available The Colorado River is an important natural resource for the Southwestern United States. Predicted climate change impacts include increased temperature, decreased rainfall and increased probability of drought in this region. Given the large amount of hydropower on the Colorado River and its importance to the bulk electricity system, this purpose of this study was to quantify the value hydropower in operating the electrical system, and examined changes in hydropower value and electricity costs under different possible future drought conditions and regional generation scenarios. The goal was to better understand how these scenarios affect operating costs of the bulk electrical system, as well as the value of the hydropower produced, and proposed a method for doing so. The calculated value of the hydroelectric power was nearly double the mean locational marginal price in the study area, about $73 to $75 for most scenarios, demonstrating a high value of the hydropower. In general, it was found that reduced water availability increased operating costs, and increased the value of the hydropower. A calculated value factor showed that when less hydroelectric power is available, the hydropower is more valuable. Furthermore, the value factor showed that the value of hydro increases with the addition of solar or the retirement of thermal generating resources.

  3. Role of band states and trap states in the electrical properties of organic semiconductors: Hopping versus mobility edge model

    KAUST Repository

    Mehraeen, Shafigh

    2013-05-01

    We compare the merits of a hopping model and a mobility edge model in the description of the effect of charge-carrier concentration on the electrical conductivity, carrier mobility, and Fermi energy of organic semiconductors. We consider the case of a composite electronic density of states (DOS) that consists of a superposition of a Gaussian DOS and an exponential DOS. Using kinetic Monte Carlo simulations, we apply the two models in order to interpret the recent experimental data reported for n-doped C60 films. While both models are capable of reproducing the experimental data very well and yield qualitatively similar characteristic parameters for the density of states, some discrepancies are found at the quantitative level. © 2013 American Physical Society.

  4. Refinement of boards' role required.

    Science.gov (United States)

    Umbdenstock, R J

    1987-01-01

    The governing board's role in health care is not changing, but new competitive forces necessitate a refinement of the board's approach to fulfilling its role. In a free-standing, community, not-for-profit hospital, the board functions as though it were the "owner." Although it does not truly own the facility in the legal sense, the board does have legal, fiduciary, and financial responsibilities conferred on it by the state. In a religious-sponsored facility, the board fulfills these same obligations on behalf of the sponsoring institute, subject to the institute's reserved powers. In multi-institutional systems, the hospital board's power and authority depend on the role granted it by the system. Boards in all types of facilities are currently faced with the following challenges: Fulfilling their basic responsibilities, such as legal requirements, financial duties, and obligations for the quality of care. Encouraging management and the board itself to "think strategically" in attacking new competitive market forces while protecting the organization's traditional mission and values. Assessing recommended strategies in light of consequences if constituencies think the organization is abandoning its commitments. Boards can take several steps to match their mode of operation with the challenges of the new environment. Boards must rededicate themselves to the hospital's mission. Trustees must expand their understanding of health care trends and issues and their effect on the organization. Boards must evaluate and help strengthen management's performance, rather than acting as a "watchdog" in an adversarial position. Boards must think strategically, rather than focusing solely on operational details. Boards must evaluate the methods they use for conducting business.

  5. Preliminary power train design for a state-of-the-art electric vehicle

    Science.gov (United States)

    Ross, J. A.; Wooldridge, G. A.

    1978-01-01

    The state-of-the-art (SOTA) of electric vehicles built since 1965 was reviewed to establish a base for the preliminary design of a power train for a SOTA electric vehicle. The performance of existing electric vehicles were evaluated to establish preliminary specifications for a power train design using state-of-the-art technology and commercially available components. Power train components were evaluated and selected using a computer simulation of the SAE J227a Schedule D driving cycle. Predicted range was determined for a number of motor and controller combinations in conjunction with the mechanical elements of power trains and a battery pack of sixteen lead-acid batteries - 471.7 kg at 0.093 MJ/Kg (1040 lbs. at 11.7 Whr/lb). On the basis of maximum range and overall system efficiency using the Schedule D cycle, an induction motor and 3 phase inverter/controller was selected as the optimum combination when used with a two-speed transaxle and steel belted radial tires. The predicted Schedule D range is 90.4 km (56.2 mi). Four near term improvements to the SOTA were identified, evaluated, and predicted to increase range approximately 7%.

  6. 76 FR 16481 - Lifeline and Link Up Reform and Modernization; Federal-State Joint Board on Universal Service...

    Science.gov (United States)

    2011-03-23

    ... proposes a series of revisions to the information collected by ETCs and their Lifeline and Link Up... apply to all ETCs in all States; (3) allow States to utilize different and/or additional verification... uniform minimum required procedures; (4) require all ETCs in all States to submit the data results of...

  7. Prediction Model of Battery State of Charge and Control Parameter Optimization for Electric Vehicle

    Directory of Open Access Journals (Sweden)

    Bambang Wahono

    2015-07-01

    Full Text Available This paper presents the construction of a battery state of charge (SOC prediction model and the optimization method of the said model to appropriately control the number of parameters in compliance with the SOC as the battery output objectives. Research Centre for Electrical Power and Mechatronics, Indonesian Institute of Sciences has tested its electric vehicle research prototype on the road, monitoring its voltage, current, temperature, time, vehicle velocity, motor speed, and SOC during the operation. Using this experimental data, the prediction model of battery SOC was built. Stepwise method considering multicollinearity was able to efficiently develops the battery prediction model that describes the multiple control parameters in relation to the characteristic values such as SOC. It was demonstrated that particle swarm optimization (PSO succesfully and efficiently calculated optimal control parameters to optimize evaluation item such as SOC based on the model.

  8. Electrostatic Discharge (ESD and Electrical Overstress (EOS: The state of the art in components to systems

    Directory of Open Access Journals (Sweden)

    Steven H. Voldman

    2017-06-01

    Full Text Available Electrostatic Discharge (ESD, Electrical Overstress (EOS and electromagnetic compatibility (EMC continue to impact semiconductor manufacturing, semiconductor components and systems as technologies scale from micro- to nano-electronics. The range of concern for components include semiconductor components, magnetic recording industry, MEMs, and for products from disk drives, cell phones, notebooks, tablets, laptops, and desktop computers. The objective of this lecture is to address the state of the art of electrostatic discharge (ESD and electrical overstress (EOS in today’s electronic components and systems. The tutorial provides a clear picture of ESD, EOS and EMC phenomena, sources, physics, failure mechanisms, testing and qualification of components and systems. The conclusion of this talk is that ESD and EOS continue to be a concern in technologies from micro-electronics to nano-structures, and will remain a reliability and quality issue in the future.

  9. Advanced state prediction of lithium-ion traction batteries in hybrid and battery electric vehicle applications

    Energy Technology Data Exchange (ETDEWEB)

    Jadidi, Yasser

    2011-07-01

    Automotive power trains with high energy efficiencies - particularly to be found in battery and hybrid electric vehicles - find increasing attention in the focus of reduction of exhaust emissions and increase of mileage. The underlying concept, the electrification of the power train, is subject to the traction battery and its battery management system since the capability of the battery permits and restricts electric propulsion. Consequently, the overall vehicle efficiency and in particular the operation strategy performance strongly depends on the quality of information about the battery. Besides battery technology, the key challenges are given by both the accurate prediction of battery behaviour and the electrochemical battery degradation that leads to power and capacity fade of the traction battery. This book provides the methodology for development of a battery state monitoring and prediction algorithm for application in a battery management system that accounts for the effects of electrochemical degradation. (orig.)

  10. Environmental impacts assessment of future electricity generating plants for the State of Minas Gerais, Brazil

    International Nuclear Information System (INIS)

    Pinheiro, Ricardo Brandt; Ribeiro, Leonardo Marcio Vilela; Loures, Marcelo de Melo Gomide

    1999-01-01

    The Energy and Power Evaluation Program was used for energy planning analysis of the entire energy system of the state of Minas Gerais, Brazil. The environmental impact and resource requirements were estimated with the IMPACTS module, using results obtained from the electricity generating system expansion plan generated by WASP, together with results of marketplace energy supply and demand balances over the study period (1995-2015) computed with the BALANCE module for five different scenarios. The results for the electricity generating system show that: the air emission levels increase in all scenarios: the growth rate of the economy and energy conservation are the most important factors affecting the emissions; the land use increase significantly, the new hydroelectric power plants contributing to almost the total of this increase. (author)

  11. Analysis of the treatment of plastic from electrical and electronic waste in the Republic of Serbia and the testing of the recycling potential of non-metallic fractions of printed circuit boards

    Directory of Open Access Journals (Sweden)

    Vučinić Aleksandra S.

    2017-01-01

    Full Text Available This paper presents the analysis of the quantity of plastic and waste printed circuit boards obtained after the mechanical treatment of electrical and electronic waste (E-waste in the Republic of Serbia, as well as the recycling of non-metallic fractions of waste printed circuit boards. The aim is to analyze the obtained recycled material and recommendation for possible application of recyclables. The data on the quantities and treatment of plastics and printed circuit boards obtained after the mechanical treatment of WEEE, were gained through questionnaires sent to the operators who treat this type of waste. The results of the questionnaire analysis showed that in 2014 the dismantling of E-waste isolated 1,870.95 t of plastic and 499.85 t of printed circuit boards. In the Republic of Serbia, E-waste recycling is performed exclusively by using mechanical methods. Mechanical methods consist of primary crushing and separation of the materials which have a utility value as secondary raw materials, from the components and materials that have hazardous properties. Respect to that, the recycling of printed circuit boards using some of the metallurgical processes with the aim of extracting copper, precious metals and non-metallic fraction is completely absent, and the circuit boards are exported as a whole. Given the number of printed circuit boards obtained by E-waste dismantling, and the fact that from an economic point of view, hydrometallurgical methods are very suitable technological solutions in the case of a smaller capacity, there is a possibility for establishing the facilities in the Republic of Serbia for the hydrometallurgical treatment that could be used for metals extraction, and non-metallic fractions, which also have their own value. Printed circuit boards granulate obtained after the mechanical pretreatment and the selective removal of metals by hydrometallurgical processes was used for the testing of the recycling potential

  12. Effects of the d-state quarks on the nucleon electric form factors

    International Nuclear Information System (INIS)

    Oh, Y.J.; Kong, K.J.; Cheon, I.T.

    1987-11-01

    Considering the d-orbital excitation of a quark in the bag, we calculate the nucleon electric form factors in the cloudy bag model. In these calculations, we have taken into account the πNN, πΔN and πγ form factors though neglecting the c.m. correction. It turns out that the neutron charge form factor is very sensitive to the d-state quark admixture in the overall region of the momentum transfer but the proton charge form factor remains unchanged. Taking the d-state quark admixture in the intermediate state baryons, we can obtain the nucleon rms radii in remarkable agreement with the experimental values. We also investigate the roles of Δ particles in the nucleon charge form factors. (author). 20 refs, 10 figs

  13. Composition Related Electrical Active Defect States of InGaAs and GaAsN

    Directory of Open Access Journals (Sweden)

    Arpad Kosa

    2017-01-01

    Full Text Available This paper discusses results of electrically active defect states - deep energy level analysis in InGaAs and GaAsN undoped semiconductor structures grown for solar cell applications. Main attention is focused on composition and growth condition dependent impurities and the investigation of their possible origins. For this purpose a widely utilized spectroscopy method, Deep Level Transient Fourier Spectroscopy, was utilized. The most significant responses of each sample labelled as InG2, InG3 and NG1, NG2 were discussed in detail and confirmed by simulations and literature data. The presence of a possible dual conduction type and dual state defect complex, dependent on the In/N composition, is reported. Beneficial characteristics of specific indium and nitrogen concentrations capable of eliminating or reducing certain point defects and dislocations are stated.

  14. Buddy Board

    DEFF Research Database (Denmark)

    Enggaard, Helle; Moselund, Lene

    2015-01-01

    Projekt ’BuddyBoard’ er kommet i stand via et samarbejde mellem Frederikshavn kommune, Bunker43 og Lab. X. Afdeling en ’Havly’ på Sæby Ældrecenter fungerer som living lab, hvilket betyder, at det udgør et levende laboratorium for udvikling og afprøvning af teknologi (Schultz, 2013). Projektet er....... Bunker43 har udviklet en teknologi (BuddyBoard) til hurtig formidling af billeder fra pårørende og personale til beboere på institutioner. Pårørende og personale uploader billeder via en APP eller en hjemmeside og har mulighed for at tilføje en kort forklarende tekst til hvert billede. Beboeren ser...... billederne via en tablet. Systemet bygger på et simpelt og brugervenligt design, så ældre med kognitive og/eller fysiske funktionsnedsættelser kan anvende teknologien. BuddyBoard fungerer via internettet, og billederne gemmes på en sikret server hos udbyderen, som er Bunker43. Intentionerne med BuddyBoard er...

  15. SVX Sequencer Board

    International Nuclear Information System (INIS)

    Utes, M.

    1997-01-01

    The SVX Sequencer boards are 9U by 280mm circuit boards that reside in slots 2 through 21 of each of eight Eurocard crates in the D0 Detector Platform. The basic purpose is to control the SVX chips for data acquisition and when a trigger occurs, to gather the SVX data and relay the data to the VRB boards in the Movable Counting House. Functions and features are as follows: (1) Initialization of eight SVX chip strings using the MIL-STD-1553 data bus; (2) Real time manipulation of the SVX control lines to effect data acquisition, digitization, and readout based on the NRZ/Clock signals from the Controller; (3) Conversion of 8-bit electrical SVX readout data to an optical signal operating at 1.062 Gbit/sec, sent to the VRB. Eight HDIs will be serviced per board; (4) Built-in logic analyzer which can record the most important control and data lines during a data acquisition cycle and put this recorded information onto the 1553 bus; (5) Identification header and end of data trailer tacked onto data stream; (6) 1553 register which can read the current values of the control and data lines; (7) 1553 register which can test the optical link; (8) 1553 registers for crossing pulse width, calibration pulse voltage, and calibration pipeline select; (9) 1553 register for reading the optical drivers status link; (10) 1553 register for power control of SVX chips and ignoring bad SVX strings; (11) Front panel displays and LEDs show the board status at a glance; (12) In-system programmable EPLDs are programmed via 1553 or Altera's 'Bitblaster'; (13) Automatic readout abort after 45us; (14) Supplies BUSY signal back to Trigger Framework; (15) Supports a heartbeat system to prevent excessive SVX current draw; and (16) Supports a SVX power trip feature if heartbeat failure occurs.

  16. Synthesising and comparing electrical properties of NTC thermistors prepared from nano powder and solid state reaction

    International Nuclear Information System (INIS)

    Azad, N.; Ghanbari Shohany, B.; Hosseini, S. M.; Kompany, A.

    2011-01-01

    In this research, NTC thermistors with composition of NiMn 2-x Co x O 4 (x = 0.4, 0.8, 1.2, 1.6) prepared by two methods: solid state reaction and sol-gel (gel-combustion). The average particle size was monitored and structure of the calcinated powders have been investigated using x-ray diffraction and tunneling electron microscopy techniques. The average particle size was estimated to be about 65 nm with the cubic and cubic + tetragonal phases for low and high cobalt concentrations, respectively. The grain size of samples verifies with scanning electron microscopy images. Upon increasing the cobalt fraction, the grain size of samples increases from about 2μm to a few μm in size. The electrical properties of these thermistors depend on the grain size. The grain size of samples made from sol-gel is smaller than from solid state reaction under the same condition. For longer sintering time of the samples prepared by gel-combustion method, the grain size was increased then the electrical parameters of nano powder improved and we obtain better results than the samples prepared from solid state reaction.

  17. 34 CFR 403.171 - Who is eligible to apply to a State board for an award?

    Science.gov (United States)

    2010-07-01

    ... an adult learning center; and (2) Business, industry, labor organizations, or apprenticeship programs...) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY...

  18. Between the state and market: Electricity sector reform in developing countries

    International Nuclear Information System (INIS)

    Jamasb, Tooraj

    2006-01-01

    Developing countries have had to reform technically and financially less efficient electricity sectors than developed countries with less resources and weaker institutions. This paper examines the reform experience and lessons in these countries. The paper reviews private participation and key reform steps such as restructuring, competition, and regulation. The role of contextual factors such as system size, institutional endowment, and international organizations are then discussed. It then argues that there is a need for redefining the role of the state rather than a full withdrawal from the sector and that many countries should adopt simpler reform models and gradual implementation. (author)

  19. Electrical resistivity and thermal conductivity of liquid aluminum in the two-temperature state

    Science.gov (United States)

    Petrov, Yu V.; Inogamov, N. A.; Mokshin, A. V.; Galimzyanov, B. N.

    2018-01-01

    The electrical resistivity and thermal conductivity of liquid aluminum in the two-temperature state is calculated by using the relaxation time approach and structural factor of ions obtained by molecular dynamics simulation. Resistivity witin the Ziman-Evans approach is also considered to be higher than in the approach with previously calculated conductivity via the relaxation time. Calculations based on the construction of the ion structural factor through the classical molecular dynamics and kinetic equation for electrons are more economical in terms of computing resources and give results close to the Kubo-Greenwood with the quantum molecular dynamics calculations.

  20. The dynamics of sectoral electricity demand for a panel of US states: New evidence on the consumption–growth nexus

    International Nuclear Information System (INIS)

    Saunoris, James W.; Sheridan, Brandon J.

    2013-01-01

    In this paper, we use a panel of the 48 contiguous US states over the period 1970–2009 to examine the dynamics of electricity demand in addressing the four hypotheses set forth in the literature: growth, conservation, neutrality, and feedback. In doing so we provide both short-run and long-run elasticity estimates for electricity demand. Recent developments in nonstationary panel estimation techniques allow for heterogeneity in the coefficients while examining the direction of causality among electricity consumption, electricity prices, and income growth. In addition to the full sample, we also disaggregate the sample into three sectors: commercial, industrial, and residential. The short-run results provide evidence in favor of the growth hypothesis for the aggregate sample, as well as for the industrial sector. For the residential and commercial sectors, the conservation hypothesis is supported. Long-run results favor the conservation hypothesis. To ascertain differences in electricity demand relating to electricity intensity we also examine states based on their efficiency in electricity consumption. Overall, the results yield in favor of the growth hypothesis for low intensity states and conservation hypothesis for high intensity states. - Highlights: • We use dynamic panel techniques to model electricity demand by sector for US states. • The conservation hypothesis is supported in the long run; short-run results are mixed. • The conservation hypothesis is supported in the high-electricity-intensity subsample. • The growth hypothesis is supported in the low-electricity-intensity subsample. • Policies aimed at energy conservation should be long-run in nature

  1. Implementing China's national energy conservation policies at state-owned electric power generation plants

    International Nuclear Information System (INIS)

    Zhao Xiaofan; Ortolano, Leonard

    2010-01-01

    China's 11th Five-Year Guideline identified energy conservation as one of the country's fundamental policies and established a mandatory target: 20% reduction in national average energy intensity by 2010. Despite the various policies, laws, and administrative reforms to support energy conservation, China fell behind schedule for meeting its conservation targets in 2006 and 2007. Using a combination of available literature and an interview-based case study, this paper examines the implementation of energy conservation and investigates impediments to achieving China's conservation goal in the electric power generation sector. Three key impediments are detailed: (1) municipal governments' incentives to overlook conservation-related central directives primarily because of budget pressures linked to financial decentralization, (2) procedural obstacles in the form of time required to obtain project approvals for high-efficiency power generation units, and (3) financial obstacles making it difficult for power generation enterprises to raise capital for energy conservation projects. An interview-based case study of a state-owned coal-fired electric power generation company demonstrates the influence of the aforementioned obstacles. While procedural obstacles are notable, they can be managed. However, electricity pricing reforms and/or stronger subsidy programs will be needed to address the financial obstacles facing Chinese power generation companies.

  2. Changes in electrical transport and density of states of phase change materials upon resistance drift

    International Nuclear Information System (INIS)

    Krebs, Daniel; Bachmann, Tobias; Jonnalagadda, Prasad; Dellmann, Laurent; Raoux, Simone

    2014-01-01

    Phase-change memory technology has become more mature in recent years. But some fundamental problems linked to the electrical transport properties in the amorphous phase of phase-change materials still need to be solved. The increase of resistance over time, called resistance drift, for example, poses a major challenge for the implementation of multilevel storage, which will eventually be necessary to remain competitive in terms of high storage densities. To link structural properties with electrical transport, a broader knowledge of (i) changes in the density of states (DoS) upon structural relaxation and (ii) the influence of defects on electrical transport is required. In this paper, we present temperature-dependent conductivity and photo-conductivity measurements on the archetype phase change material GeTe. It is shown that trap-limited band transport at high temperatures (above 165 K) and variable range hopping at low temperatures are the predominating transport mechanism. Based on measurements of the temperature dependence of the optical band gap, modulated photo-conductivity and photo-thermal deflection spectroscopy, a DoS model for GeTe was proposed. Using this DoS, the temperature dependence of conductivity and photo-conductivity has been simulated. Our work shows how changes in the DoS (band gap and defect distributions) will affect the electrical transport before and after temperature-accelerated drift. The decrease in conductivity upon annealing can be explained entirely by an increase of the band gap by about 12%. However, low-temperature photo-conductivity measurements revealed that a change in the defect density may also play a role

  3. The impact of government incentives for hybrid-electric vehicles: Evidence from US states

    International Nuclear Information System (INIS)

    Diamond, David

    2009-01-01

    This paper examines the impact of government incentives policies designed to promote the adoption of hybrid-electric vehicles (HEVs). As a primary methodology, it employs cross-sectional analysis of hybrid registration data over time from US states to test the relationship between hybrid adoption and a variety of socioeconomic and policy variables. It also compares hybrid adoption patterns over time to the US average for specific states that have changed incentive policies, to examine how differences in incentive schemes influence their efficacy. The results of these analyses suggest a strong relationship between gasoline prices and hybrid adoption, but a much weaker relationship between incentive policies and hybrid adoption. Incentives that provide payments upfront also appear to be the most effective

  4. STEADY STATE AND PSEUDO-TRANSIENT ELECTRIC POTENTIAL USING THE POISSONBOLTZMANN EQUATION

    Directory of Open Access Journals (Sweden)

    L. C. dos Santos

    2015-03-01

    Full Text Available A method for analysis of the electric potential profile in saline solutions was developed for systems with one or two infinite flat plates. A modified Poisson-Boltzmann equation, taking into account nonelectrostatic interactions between ions and surfaces, was used. To solve the stated problem in the steady-state approach the finite-difference method was used. For the formulated pseudo-transient problem, we solved the set of ordinary differential equations generated from the algebraic equations of the stationary case. A case study was also carried out in relation to temperature, solution concentration, surface charge and salt-type. The results were validated by the stationary problem solution, which had also been used to verify the ionic specificity for different salts. The pseudo-transient approach allowed a better understanding of the dynamic behavior of the ion-concentration profile and other properties due to the surface charge variation.

  5. Wind power development in the United States: Effects of policies and electricity transmission congestion

    Science.gov (United States)

    Hitaj, Claudia

    In this dissertation, I analyze the drivers of wind power development in the United States as well as the relationship between renewable power plant location and transmission congestion and emissions levels. I first examine the role of government renewable energy incentives and access to the electricity grid on investment in wind power plants across counties from 1998-2007. The results indicate that the federal production tax credit, state-level sales tax credit and production incentives play an important role in promoting wind power. In addition, higher wind power penetration levels can be achieved by bringing more parts of the electricity transmission grid under independent system operator regulation. I conclude that state and federal government policies play a significant role in wind power development both by providing financial support and by improving physical and procedural access to the electricity grid. Second, I examine the effect of renewable power plant location on electricity transmission congestion levels and system-wide emissions levels in a theoretical model and a simulation study. A new renewable plant takes the effect of congestion on its own output into account, but ignores the effect of its marginal contribution to congestion on output from existing plants, which results in curtailment of renewable power. Though pricing congestion removes the externality and reduces curtailment, I find that in the absence of a price on emissions, pricing congestion may in some cases actually increase system-wide emissions. The final part of my dissertation deals with an econometric issue that emerged from the empirical analysis of the drivers of wind power. I study the effect of the degree of censoring on random-effects Tobit estimates in finite sample with a particular focus on severe censoring, when the percentage of uncensored observations reaches 1 to 5 percent. The results show that the Tobit model performs well even at 5 percent uncensored observations

  6. Photoreflectance and Raman Study of Surface Electric States on AlGaAs/GaAs Heterostructures

    Directory of Open Access Journals (Sweden)

    Luis Zamora-Peredo

    2016-01-01

    Full Text Available Photoreflectance (PR and Raman are two very useful spectroscopy techniques that usually are used to know the surface electronic states in GaAs-based semiconductor devices. However, although they are exceptional tools there are few reports where both techniques were used in these kinds of devices. In this work, the surface electronic states on AlGaAs/GaAs heterostructures were studied in order to identify the effect of factors like laser penetration depth, cap layer thickness, and surface passivation over PR and Raman spectra. PR measurements were performed alternately with two lasers (532 nm and 375 nm wavelength as the modulation sources in order to identify internal and surface features. The surface electric field calculated by PR analysis decreased whereas the GaAs cap layer thickness increased, in good agreement with a similar behavior observed in Raman measurements (IL-/ILO ratio. When the heterostructures were treated by Si-flux, these techniques showed contrary behaviors. PR analysis revealed a diminution in the surface electric field due to a passivation process whereas the IL-/ILO ratio did not present the same behavior because it was dominated by the depletion layers width (cap layer thickness and the laser penetration depth.

  7. The water implications of generating electricity: water use across the United States based on different electricity pathways through 2050

    International Nuclear Information System (INIS)

    Macknick, J; Sattler, S; Clemmer, S; Rogers, J; Averyt, K

    2012-01-01

    The power sector withdraws more freshwater annually than any other sector in the US. The current portfolio of electricity generating technologies in the US has highly regionalized and technology-specific requirements for water. Water availability differs widely throughout the nation. As a result, assessments of water impacts from the power sector must have a high geographic resolution and consider regional, basin-level differences. The US electricity portfolio is expected to evolve in coming years, shaped by various policy and economic drivers on the international, national and regional level; that evolution will impact power sector water demands. Analysis of future electricity scenarios that incorporate technology options and constraints can provide useful insights about water impacts related to changes to the technology mix. Utilizing outputs from the regional energy deployment system (ReEDS) model, a national electricity sector capacity expansion model with high geographical resolution, we explore potential changes in water use by the US electric sector over the next four decades under various low carbon energy scenarios, nationally and regionally. (letter)

  8. 75 FR 56494 - High-Cost Universal Service Support and Federal-State Joint Board on Universal Service

    Science.gov (United States)

    2010-09-16

    ... telecommunications carriers (ETCs). 2. In the NPRM, we seek comment on permanently amending our rules to facilitate... competitive ETCs serving each state at the level of support such carriers were eligible to receive in March 2008, on an annualized basis. This cap amount does not change even if the number of competitive ETCs...

  9. An Interpretive Inquiry of the Case Law of Teacher Evaluation in the Southern Regional Education Board States: Forecasting Pressing Problems

    Science.gov (United States)

    Kidder-Wilkerson, Kathy S.

    2009-01-01

    The purpose of this study was to analyze case law related to teacher evaluation between 1980 and 2008 in the SREB states to determine the problems associated with teacher evaluation and if these problems were documented in the literature. Content analysis of teacher dismissal cases revealed many types of teacher evaluation problems. The two most…

  10. 34 CFR 403.172 - What special considerations must the State board give in approving projects, services, and...

    Science.gov (United States)

    2010-07-01

    ... years of age in order to assist their entry into, or advancement in, high-technology occupations or to... EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Kinds of Activities Does the Secretary Assist Under the Special Programs? Business-Labor-Education Partnership for Training Program § 403...

  11. Potential air quality benefits from increased solar photovoltaic electricity generation in the Eastern United States

    Energy Technology Data Exchange (ETDEWEB)

    Abel, David; Holloway, Tracey; Harkey, Monica; Rrushaj, Arber; Brinkman, Greg; Duran, Phillip; Janssen, Mark; Denholm, Paul

    2018-02-01

    We evaluate how fine particulate matter (PM2.5) and precursor emissions could be reduced if 17% of electricity generation was replaced with solar photovoltaics (PV) in the Eastern United States. Electricity generation is simulated using GridView, then used to scale electricity-sector emissions of sulfur dioxide (SO2) and nitrogen oxides (NOX) from an existing gridded inventory of air emissions. This approach offers a novel method to leverage advanced electricity simulations with state-of-the-art emissions inventories, without necessitating recalculation of emissions for each facility. The baseline and perturbed emissions are input to the Community Multiscale Air Quality Model (CMAQ version 4.7.1) for a full accounting of time- and space-varying air quality changes associated with the 17% PV scenario. These results offer a high-value opportunity to evaluate the reduced-form AVoided Emissions and geneRation Tool (AVERT), while using AVERT to test the sensitivity of results to changing base-years and levels of solar integration. We find that average NOX and SO2 emissions across the region decrease 20% and 15%, respectively. PM2.5 concentrations decreased on average 4.7% across the Eastern U.S., with nitrate (NO3-) PM2.5 decreasing 3.7% and sulfate (SO42-) PM2.5 decreasing 9.1%. In the five largest cities in the region, we find that the most polluted days show the most significant PM2.5 decrease under the 17% PV generation scenario, and that the greatest benefits are accrued to cities in or near the Ohio River Valley. We find summer health benefits from reduced PM2.5 exposure estimated as 1424 avoided premature deaths (95% Confidence Interval (CI): 284 deaths, 2 732 deaths) or a health savings of $13.1 billion (95% CI: $0.6 billion, $43.9 billion) These results highlight the potential for renewable energy as a tool for air quality managers to support current and future health-based air quality regulations.

  12. Potential air quality benefits from increased solar photovoltaic electricity generation in the Eastern United States

    Science.gov (United States)

    Abel, David; Holloway, Tracey; Harkey, Monica; Rrushaj, Arber; Brinkman, Greg; Duran, Phillip; Janssen, Mark; Denholm, Paul

    2018-02-01

    We evaluate how fine particulate matter (PM2.5) and precursor emissions could be reduced if 17% of electricity generation was replaced with solar photovoltaics (PV) in the Eastern United States. Electricity generation is simulated using GridView, then used to scale electricity-sector emissions of sulfur dioxide (SO2) and nitrogen oxides (NOX) from an existing gridded inventory of air emissions. This approach offers a novel method to leverage advanced electricity simulations with state-of-the-art emissions inventories, without necessitating recalculation of emissions for each facility. The baseline and perturbed emissions are input to the Community Multiscale Air Quality Model (CMAQ version 4.7.1) for a full accounting of time- and space-varying air quality changes associated with the 17% PV scenario. These results offer a high-value opportunity to evaluate the reduced-form AVoided Emissions and geneRation Tool (AVERT), while using AVERT to test the sensitivity of results to changing base-years and levels of solar integration. We find that average NOX and SO2 emissions across the region decrease 20% and 15%, respectively. PM2.5 concentrations decreased on average 4.7% across the Eastern U.S., with nitrate (NO3-) PM2.5 decreasing 3.7% and sulfate (SO42-) PM2.5 decreasing 9.1%. In the five largest cities in the region, we find that the most polluted days show the most significant PM2.5 decrease under the 17% PV generation scenario, and that the greatest benefits are accrued to cities in or near the Ohio River Valley. We find summer health benefits from reduced PM2.5 exposure estimated as 1424 avoided premature deaths (95% Confidence Interval (CI): 284 deaths, 2 732 deaths) or a health savings of 13.1 billion (95% CI: 0.6 billion, 43.9 billion) These results highlight the potential for renewable energy as a tool for air quality managers to support current and future health-based air quality regulations.

  13. Trends In Geoscience Professional Ethics Indicated By National Association of State Boards of Geology (ASBOG®) Surveys of The Practicing Profession

    Science.gov (United States)

    Williams, J. W.; Warner, J. L.

    2016-12-01

    ASBOG® was founded in 1988 to facilitate cooperation and coordination among states with licensing of practicing professional geologists-currently 29 states and Puerto Rico. ASBOG® creates national exams which are used by all of the states granting licensure. Periodic surveys of the practicing profession every 5 years are used to determine the skills and knowledge needed for professional practice and are used to generate the exam blueprints. Currently questions on professional ethics are included on the national licensing exams. Thirteen professional ethics issues in the geosciences were included on the Task Analysis Surveys (TAS) in 2005, 2010 and 2015. Professional geologists rate the seriousness of and the frequency of contact with these ethics issues. Topics include such items as gift-giving, whistleblowing, plagiarism, etc. The respondents are grouped into one of three categories: practicing licensed geologists in the United States, practicing licensed geologists in Canada, and geologists employed in the academic sector. Regardless of the employment sector, the responses to the professional ethics questions were statistically very similar (r values - Seriousness - USA vs. Academic +0.81, USA vs. Canada +0.94, Academic vs. Canada +0.86: Frequency - USA vs. Academic +0.71, USA vs. Canada +0.85, Academic vs. Canada +0.72). Some differences were detected. For example, plagiarism is regarded by practitioners in the academic sector as more important than this issue among licensed practicing geologists in the United States and Canada. The professional ethics issues asked on the 2010 and 2015 surveys are identical to facilitate detection of any temporal changes in response patterns. Statistically, the responses from practicing geologists in the USA in the 2010 and 2015 surveys are nearly identical, indicating that the profession has maintained virtually the same attitudes with regard to professional ethics (Seriousness r = +0.99, Frequency r = +0.99).

  14. The Ontario Energy Board`s draft standard supply service code: effects on air quality

    Energy Technology Data Exchange (ETDEWEB)

    Gibbons, J.; Bjorkquist, S. [Ontario Clean Air Alliance, Toronto, ON (Canada)

    1999-06-29

    The Ontario Clean Air Alliance (OCAA), a coalition of 67 organizations, takes issue with the Ontario Energy Board`s draft document `Standard Supply Service Code`, particularly sections 2.2.2. and 2.5.2 which they claim are not in the public interest unless the Ontario government implements the OCAA`s recommended emission caps. The alliance is of the view that without strict new environmental regulations the proposed Code would encourage the use of coal for electricity generation. Public health, the environment, consumer interests, job creation and promotion of a competitive electricity market would all be jeopardized by this development, the alliance states. The argument is supported by extensive reference to the Final Report of the Ontario Market Design Committee (MDC) which also emphasized the importance of combining the introduction of competition with appropriate environmental regulations, singling out the emission cap and trade program, and recommending that it be launched concurrently with the electricity market opening for competition. The view of the MDC was that public support for restructuring would not be forthcoming in the absence of regulatory measures to control power plant emissions. 25 refs.

  15. Impact of deployment of renewable portfolio standard on the electricity price in the State of Illinois and implications on policies

    International Nuclear Information System (INIS)

    Kung, Harold H.

    2012-01-01

    The Renewable Portfolio Standard (RPS) of the State of Illinois specifies a schedule for the fraction of electricity produced from wind to be phased in through 2025. The price of electricity due to implementation of RPS in order to achieve a six-year payback on investment on new wind farms was estimated for six scenarios that examined the effect of electricity consumption growth rate, production tax credit of $0.022/kW h or unrestricted investment tax credit of 30%, and projected changes in installed project costs. In all cases, the electricity price was found to be dominated by the installed project cost (capital cost). Thus, any policy that affects the capital cost directly or indirectly would have a significant effect on the electricity price. Whereas investment tax credit has a direct effect, policies that encourage technology improvement and improve transmission lines would have a similar effect of lowering the capital cost. Carbon tax, on the other hand, would increase the electricity price to the consumers, although it offers other benefits. Highlights: ► Capital cost dominates the price of wind electricity. ► Policies for wind electricity should aim at lowering the capital cost directly or indirectly. ► Carbon tax does not lower wind electricity price, and is beneficial for other reasons.

  16. An evaluation of the impact of state Renewable Portfolio Standards (RPS) on retail, commercial, and industrial electricity prices

    Science.gov (United States)

    Puram, Rakesh

    The Renewable Portfolio Standard (RPS) has become a popular mechanism for states to promote renewable energy and its popularity has spurred a potential bill within Congress for a nationwide Federal RPS. While RPS benefits have been touted by several groups, it also has detractors. Among the concerns is that RPS standards could raise electricity rates, given that renewable energy is costlier than traditional fossil fuels. The evidence on the impact of RPS on electricity prices is murky at best: Complex models by NREL and USEIA utilize computer programs with several assumptions which make empirical studies difficult and only predict slight increases in electricity rates associated with RPS standards. Recent theoretical models and empirical studies have found price increases, but often fail to comprehensively include several sets of variables, which in fact could confound results. Utilizing a combination of past papers and studies to triangulate variables this study aims to develop both a rigorous fixed effects regression model as well as a theoretical framework to explain the results. This study analyzes state level panel data from 2002 to 2008 to analyze the effect of RPS on residential, commercial, and industrial electricity prices, controlling for several factors including amount of electricity generation from renewable and non-renewable sources, customer incentives for renewable energy, macroeconomic and demographic indicators, and fuel price mix. The study contrasts several regressions to illustrate important relationships and how inclusions as well as exclusion of various variables have an effect on electricity rates. Regression results indicate that the presence of RPS within a state increases the commercial and residential electricity rates, but have no discernable effect on the industrial electricity rate. Although RPS tends to increase electricity prices, the effect has a small impact on higher electricity prices. The models also indicate that jointly all

  17. Climate Change Impacts on Rivers and Implications for Electricity Generation in the United States

    Science.gov (United States)

    Miara, A.; Vorosmarty, C. J.; Macknick, J.; Corsi, F.; Cohen, S. M.; Tidwell, V. C.; Newmark, R. L.; Prousevitch, A.

    2015-12-01

    The contemporary power sector in the United States is heavily reliant on water resources to provide cooling water for thermoelectric generation. Efficient thermoelectric plant operations require large volumes of water at sufficiently cool temperatures for their cooling process. The total amount of water that is withdrawn or consumed for cooling and any potential declines in efficiencies are determined by the sector's fuel mix and cooling technologies. As such, the impact of climate change, and the extent of impact, on the power sector is shaped by the choice of electricity generation technologies that will be built over the coming decades. In this study, we model potential changes in river discharge and temperature in the contiguous US under a set of climate scenarios to year 2050 using the Water Balance Model-Thermoelectric Power and Thermal Pollution Model (WBM-TP2M). Together, these models quantify, in high-resolution (3-min), river temperatures, discharge and power plant efficiency losses associated with changes in available cooling water that incorporates climate, hydrology, river network dynamics and multi-plant impacts, on both single power plant and regional scales. Results are used to assess the aptness and vulnerability of contemporary and alternative electricity generation pathways to changes in climate and water availability for cooling purposes, and the concomitant impacts on power plant operating efficiencies. We assess the potential impacts by comparing six regions (Northeast, Southeast, Midwest, Great Plains, Southwest, Northwest as in the National Climate Assessment (2014)) across the US. These experiments allow us to assess tradeoffs among electricity-water-climate to provide useful insight for decision-makers managing regional power production and aquatic environments.

  18. The Potential Economic Impact of Electricity Restructuring in the State of Oklahoma: Phase II Report; FINAL

    International Nuclear Information System (INIS)

    Hadley, SW

    2001-01-01

    Because of the recent experiences of several states undergoing restructuring (e.g., higher prices, greater volatility, lower reliability), concerns have been raised in states currently considering restructuring as to whether their systems are equally vulnerable. Factors such as local generation costs, transmission constraints, market concentration, and market design can all play a role in the success or failure of the market. These factors along with the mix of generation capacity supplying the state will influence the relative prices paid by consumers. The purpose of this project is to provide a model and process to evaluate the potential price and economic impacts of restructuring the Oklahoma electric industry. The Phase I report concentrated on providing an analysis of the Oklahoma system in the near-term, using only present generation resources and customer demands. This Phase II study analyzed the Oklahoma power market in 2010, incorporating the potential of new generation resources and customer responses. Five key findings of this Phase II were made: (1) Projected expansion in generating capacity exceeds by over 3,000 MW the demands within the state plus the amount that could be exported with the current transmission system. (2) Even with reduced new plant construction, most new plants could lose money (although residential consumers would see lower rates) unless they have sufficient market power to raise their prices without losing significant market share (Figure S-1). (3) If new plants can raise prices to stay profitable, existing low-cost coal and hydro plants will have very high profits. Average prices to customers could be 5% to 25% higher than regulated rates (Figure S-1). If the coal and hydro plants are priced at cost-based rates (through long-term contracts or continued regulation) while all other plants use market-based rates then prices are lower. (4) Customer response to real-time prices can lower the peak capacity requirements by around 9

  19. LIBERALISATION OF THE ELECTRICITY SECTOR IN THE EUROPEAN UNION: PRESENT STATE AND SOME OPEN QUESTIONS

    Energy Technology Data Exchange (ETDEWEB)

    Nunez, A.

    2007-07-01

    The liberalisation of the electricity sector started approximately 10 to 15 years ago, depending on the country. Nonetheless, there is still no general agreement on the liberalisation model this sector should follow, mainly because of the discussion of whether the liberalisation is an end in itself, or a means for -basically- lower energy prices. The complexity of the sector and the resilience of the incumbents' market power have currently placed the liberalisation process at a crossroad. In the EU, entrenched national interests are another obstacle to deal with. In this article, we first give an overview of the different liberalisation processes in the electricity sector and then summarize the pending challenges from an EU perspective. Next, we argue that the EU should focus on conditions aiming at implementing an effective liberalisation process, rather than on a formal liberalisation approach. We show how asymmetries between non-sector regulations in the European states and among companies create an uneven playing field, contrary to the European vision of an internal competitive energy market. We end the article studying the compatibility of the current European regulatory framework with the upcoming challenges in the energy sector. (auth)

  20. Lignite mining and electricity generation in Poland: The current state and future prospects

    International Nuclear Information System (INIS)

    Widera, Marek; Kasztelewicz, Zbigniew; Ptak, Miranda

    2016-01-01

    This opinion paper presents the current state and future scenarios of Polish lignite mining. For many years, over 1/3 of domestic electricity, that is about 53–55 TWh, has been generated by lignite-fired power plants. Currently, with 63–66 million tons of extraction, Poland is the fourth lignite producer worldwide and the second in the European Union. There are three possible scenarios for the development of lignite mining in Poland by 2050. Unfortunately, despite the huge lignite resources, amounting to more than 23.5 billion tons, and great potential of the mining industry, the future of Polish lignite mining does not look optimistic from the economic point of view. This is associated with social and environmental problems, including the European Union's climate and energy policy. However, this may change in the event of a global economic crisis and unstable geopolitical conditions. Therefore, a new energy doctrine for Poland at least by 2050 is urgently needed. - Highlights: •Poland is one of the leaders in lignite production in the European Union. •Energy policy in Poland assumes a key role of lignite in energy mix. •Almost one-third of Polish electricity is currently generated from lignite. •For Polish lignite mining exist pessimistic, realistic and optimistic scenarios. •Extraction of lignite in Poland will gradually decrease in the coming decades.

  1. Cycles in competitive electricity markets: a simulation study of the western United States

    International Nuclear Information System (INIS)

    Ford, A.

    1999-01-01

    This paper describes the potential for power plant construction to appear in waves causing alternating periods of over and under supply of electricity. The end result would be major swings in market prices as the industry moves through the phases of a construction cycle. This paper begins with some background on why these cycles should be taken seriously as we write the rules for a restructured electricity industry. It uses computer simulation to learn that cycles could emerge if the western states adopt the market rules used in California. Construction cycles are a potentially serious problem, but they are not inevitable. This paper uses computer simulation to show that cycles could be dampened substantially by introducing a constant capacity payment along side of the market clearing price for energy. The paper concludes with an examination of the consumer impacts of a constant capacity payment. Wholesale consumers would experience higher costs in the short run, but lower energy prices would nullify the impact of capacity payments in the long run. Retail consumers would not necessarily face higher costs in the short run because of a reduction in charges for recovery of stranded costs. (author)

  2. State of Charge Estimation Based on Microscopic Driving Parameters for Electric Vehicle's Battery

    Directory of Open Access Journals (Sweden)

    Enjian Yao

    2013-01-01

    Full Text Available Recently, battery-powered electric vehicle (EV has received wide attention due to less pollution during use, low noise, and high energy efficiency and is highly expected to improve urban air quality and then mitigate energy and environmental pressure. However, the widespread use of EV is still hindered by limited battery capacity and relatively short cruising range. This paper aims to propose a state of charge (SOC estimation method for EV’s battery necessary for route planning and dynamic route guidance, which can help EV drivers to search for the optimal energy-efficient routes and to reduce the risk of running out of electricity before arriving at the destination or charging station. Firstly, by analyzing the variation characteristics of power consumption rate with initial SOC and microscopic driving parameters (instantaneous speed and acceleration, a set of energy consumption rate models are established according to different operation modes. Then, the SOC estimation model is proposed based on the presented EV power consumption model. Finally, by comparing the estimated SOC with the measured SOC, the proposed SOC estimation method is proved to be highly accurate and effective, which can be well used in EV route planning and navigation systems.

  3. Board Task Performance

    DEFF Research Database (Denmark)

    Minichilli, Alessandro; Zattoni, Alessandro; Nielsen, Sabina

    2012-01-01

    identify three board processes as micro-level determinants of board effectiveness. Specifically, we focus on effort norms, cognitive conflicts and the use of knowledge and skills as determinants of board control and advisory task performance. Further, we consider how two different institutional settings....... The findings show that: (i) Board processes have a larger potential than demographic variables to explain board task performance; (ii) board task performance differs significantly between boards operating in different contexts; and (iii) national context moderates the relationships between board processes...... and board task performance....

  4. Nuclear Electricity in the United States : Providing Energy For The Nation's Security and Well-Being

    International Nuclear Information System (INIS)

    Finger, Harold B.

    1988-01-01

    Nuclear energy in the United States has made major contributions since the small Shippingport prototype power plant began operating in 1957. Recent legislative and regulatory actions, as well as research an development, are indicating that additional nuclear capacity can be available in the years ahead. These actions reflect the public's recognition of the importance of nuclear energy. In addition, recent regulatory actions are reaffirming the health and safety of our current nuclear plants, as well as of those being completed. The performance of our current plants is being improved through the conscious dedication of the entire industry to excellence. There is increasing discussion in the United States of the importance of advanced reactor concepts development. The next generation of nuclear plants is already being ordered outside of the United States for example, here in Korea, in Japan, in the United Kingdom and those plants all use light water reactors. We are pleased that U. S. companies are working with you on these new plants. That continues to mean that we never let up on our drive for excellence. Excellence in operations must continue to be the conscious target of all operators. Excellence in communications to the public of the need for electrical capacity, of the benefits of nuclear energy, and of the excellence being achieved in operations is also essential. And excellence in communication to decision makers at all levels of government is also required to assure that sound legalisation and regulation is established and implemented

  5. Review of the human reliability analysis performed for Empire State Electric Energy Research Corporation

    International Nuclear Information System (INIS)

    Swart, D.; Banz, I.

    1985-01-01

    The Empire State Electric Energy Research Corporation (ESEERCO) commissioned Westinghouse to conduct a human reliability analysis to identify and quantify human error probabilities associated with operator actions for four specific events which may occur in light water reactors: loss of coolant accident, steam generator tube rupture, steam/feed line break, and stuck open pressurizer spray valve. Human Error Probabilities (HEPs) derived from Swain's Technique for Human Error Rate Prediction (THERP) were compared to data obtained from simulator exercises. A correlation was found between the HEPs derived from Swain and the results of the simulator data. The results of this study provide a unique insight into human factors analysis. The HEPs obtained from such probabilistic studies can be used to prioritize scenarios for operator training situations, and thus improve the correlation between simulator exercises and real control room experiences

  6. A methodology for the electrical energy system planning of Tamil Nadu state (India)

    International Nuclear Information System (INIS)

    Daniel, J.; Dicorato, M.; Forte, G.; Iniyan, S.; Trovato, M.

    2009-01-01

    In this paper, an energy planning optimisation procedure of a selected territory is illustrated and applied using an energy flow optimisation model. The developed approach takes into account various electricity generating options to meet the energy needs of various demand sectors. Energy saving techniques and hybrid technologies are considered and various scenarios are developed by assessing the contribution of renewable energy technologies over the planning period. The procedure aims to reduce the total actualised cost of energy generation over selected time horizon and predicts the additional installations required along with the existing facilities to meet the energy demand. At the same time the role of renewable energy technologies and of energy saving measures is evaluated by imposing suitable constraints on CO 2 emissions and primary energy sources exploitation. The procedure is applied to the territory of Tamil Nadu state (India) by considering different energy planning scenarios

  7. Defense Business Board

    Science.gov (United States)

    Skip to main content (Press Enter). Toggle navigation Defense Business Board Search Search Defense Business Board: Search Search Defense Business Board: Search Defense Business Board Business Excellence in Defense of the Nation Defense Business Board Home Charter Members Meetings Studies Contact Us The Defense

  8. Adaptive unscented Kalman filtering for state of charge estimation of a lithium-ion battery for electric vehicles

    International Nuclear Information System (INIS)

    Sun, Fengchun; Hu, Xiaosong; Zou, Yuan; Li, Siguang

    2011-01-01

    An accurate battery State of Charge estimation is of great significance for battery electric vehicles and hybrid electric vehicles. This paper presents an adaptive unscented Kalman filtering method to estimate State of Charge of a lithium-ion battery for battery electric vehicles. The adaptive adjustment of the noise covariances in the State of Charge estimation process is implemented by an idea of covariance matching in the unscented Kalman filter context. Experimental results indicate that the adaptive unscented Kalman filter-based algorithm has a good performance in estimating the battery State of Charge. A comparison with the adaptive extended Kalman filter, extended Kalman filter, and unscented Kalman filter-based algorithms shows that the proposed State of Charge estimation method has a better accuracy. -- Highlights: → Adaptive unscented Kalman filtering is proposed to estimate State of Charge of a lithium-ion battery for electric vehicles. → The proposed method has a good performance in estimating the battery State of Charge. → A comparison with three other Kalman filtering algorithms shows that the proposed method has a better accuracy.

  9. High school science teacher perceptions of the science proficiency testing as mandated by the State of Ohio Board of Education

    Science.gov (United States)

    Jeffery, Samuel Shird

    There is a correlation between the socioeconomic status of secondary schools and scores on the State of Ohio's mandated secondary science proficiency tests. In low scoring schools many reasons effectively explain the low test scores as a result of the low socioeconomics. For example, one reason may be that many students are working late hours after school to help with family finances; parents may simply be too busy providing family income to realize the consequences of the testing program. There are many other personal issues students face that may cause them to score poorly an the test. The perceptions of their teachers regarding the science proficiency test program may be one significant factor. These teacher perceptions are the topic of this study. Two sample groups ware established for this study. One group was science teachers from secondary schools scoring 85% or higher on the 12th grade proficiency test in the academic year 1998--1999. The other group consisted of science teachers from secondary schools scoring 35% or less in the same academic year. Each group of teachers responded to a survey instrument that listed several items used to determine teachers' perceptions of the secondary science proficiency test. A significant difference in the teacher' perceptions existed between the two groups. Some of the ranked items on the form include teachers' opinions of: (1) Teaching to the tests; (2) School administrators' priority placed on improving average test scores; (3) Teacher incentive for improving average test scores; (4) Teacher teaching style change as a result of the testing mandate; (5) Teacher knowledge of State curriculum model; (6) Student stress as a result of the high-stakes test; (7) Test cultural bias; (8) The tests in general.

  10. 39 CFR 3.1 - Composition and responsibilities of Board.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Composition and responsibilities of Board. 3.1 Section 3.1 Postal Service UNITED STATES POSTAL SERVICE THE BOARD OF GOVERNORS OF THE U.S. POSTAL SERVICE... Board is described in 39 U.S.C. 202. The Board directs the exercise of the powers of the Postal Service...

  11. 39 CFR 4.6 - Secretary of the Board.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Secretary of the Board. 4.6 Section 4.6 Postal Service UNITED STATES POSTAL SERVICE THE BOARD OF GOVERNORS OF THE U.S. POSTAL SERVICE OFFICIALS (ARTICLE IV) § 4.6 Secretary of the Board. The Secretary of the Board of Governors is appointed by the...

  12. 39 CFR 3.2 - Compensation of Board.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Compensation of Board. 3.2 Section 3.2 Postal Service UNITED STATES POSTAL SERVICE THE BOARD OF GOVERNORS OF THE U.S. POSTAL SERVICE BOARD OF GOVERNORS (ARTICLE III) § 3.2 Compensation of Board. Section 202(a)(1) of title 39 provides for the compensation of...

  13. State-of-the-art assessment of electric and hybrid vehicles

    Science.gov (United States)

    1978-01-01

    Data are presented that were obtained from the electric and hybrid vehicles tested, information collected from users of electric vehicles, and data and information on electric and hybrid vehicles obtained on a worldwide basis from manufacturers and available literature. The data given include: (1) information and data base (electric and hybrid vehicle systems descriptions, sources of vehicle data and information, and sources of component data); (2) electric vehicles (theoretical background, electric vehicle track tests, user experience, literature data, and summary of electric vehicle status); (3) electric vehicle components (tires, differentials, transmissions, traction motors, controllers, batteries, battery chargers, and component summary); and (4) hybrid vehicles (types of hybrid vehicles, operating modes, hybrid vehicles components, and hybrid vehicles performance characteristics).

  14. Challenges and Experiences with Electric Propulsion Transit Buses in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Gifford, M.

    2003-11-01

    Document provides background for transit agencies and fleets that are considering electric propulsion technologies. It tells them what to expect and plan for when implementing vehicles with electric propulsion systems.

  15. A Lossy Counting-Based State of Charge Estimation Method and Its Application to Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Hong Zhang

    2015-12-01

    Full Text Available Estimating the residual capacity or state-of-charge (SoC of commercial batteries on-line without destroying them or interrupting the power supply, is quite a challenging task for electric vehicle (EV designers. Many Coulomb counting-based methods have been used to calculate the remaining capacity in EV batteries or other portable devices. The main disadvantages of these methods are the cumulative error and the time-varying Coulombic efficiency, which are greatly influenced by the operating state (SoC, temperature and current. To deal with this problem, we propose a lossy counting-based Coulomb counting method for estimating the available capacity or SoC. The initial capacity of the tested battery is obtained from the open circuit voltage (OCV. The charging/discharging efficiencies, used for compensating the Coulombic losses, are calculated by the lossy counting-based method. The measurement drift, resulting from the current sensor, is amended with the distorted Coulombic efficiency matrix. Simulations and experimental results show that the proposed method is both effective and convenient.

  16. Spacecraft electrical power subsystem: Failure behavior, reliability, and multi-state failure analyses

    International Nuclear Information System (INIS)

    Kim, So Young; Castet, Jean-Francois; Saleh, Joseph H.

    2012-01-01

    This article investigates the degradation and failure behavior of spacecraft electrical power subsystem (EPS) on orbit. First, this work provides updated statistical reliability and multi-state failure analyses of spacecraft EPS and its different constituents, namely the batteries, the power distribution, and the solar arrays. The EPS is shown to suffer from infant mortality and to be a major driver of spacecraft unreliability. Over 25% of all spacecraft failures are the result of EPS failures. As a result, satellite manufacturers may wish to pursue targeted improvement to this subsystem, either through better testing or burn-in procedures, better design or parts selection, or additional redundancy. Second, this work investigates potential differences in the EPS degradation and failure behavior for spacecraft in low earth orbits (LEO) and geosynchronous orbits (GEO). This analysis was motivated by the recognition that the power/load cycles and the space environment are significantly different in LEO and GEO, and as such, they may result in different failure behavior for the EPS in these two types of orbits. The results indicate, and quantify the extent to which, the EPS fails differently in LEO and GEO, both in terms of frequency and severity of failure events. A casual summary of the findings can be stated as follows: the EPS fails less frequently but harder (with fatal consequences to the spacecraft) in LEO than in GEO.

  17. Intervention of the Canadian Nuclear Association to the National Energy Board

    International Nuclear Information System (INIS)

    1982-01-01

    This submission from the Canadian Nuclear Association to the National Energy Board of Canada was made in support of the application by the New Brunswick Electric Power Commission to increase its electricity exports from the Point Lepreau nuclear station to the New England states from 205 MW to 335 MW. The Canadian Nuclear Association felt that their support was justified in view of the fact that the CANDU nuclear reactor had proven itself to be a safe, reliable and economic source of electric generation. They felt the 630 MW CANDU station at Point Lepreau, New Brunswick would have sufficient generating capacity to export 335 MW for a ten-year period

  18. Electric power supply and demand for the contiguous United States, 1980-1989

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-06-01

    A limited review is presented of the outlook for the electric power supply and demand during the period 1980 to 1989. Only the adequacy and reliability aspects of bulk electric power supply in the contiguous US are considered. The economic, financial and environmental aspects of electric power system planning and the distribution of electricity (below the transmission level) are topics of prime importance, but they are outside the scope of this report.

  19. Updated Value of Service Reliability Estimates for Electric Utility Customers in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, Michael [Nexant Inc., Burlington, MA (United States); Schellenberg, Josh [Nexant Inc., Burlington, MA (United States); Blundell, Marshall [Nexant Inc., Burlington, MA (United States)

    2015-01-01

    This report updates the 2009 meta-analysis that provides estimates of the value of service reliability for electricity customers in the United States (U.S.). The meta-dataset now includes 34 different datasets from surveys fielded by 10 different utility companies between 1989 and 2012. Because these studies used nearly identical interruption cost estimation or willingness-to-pay/accept methods, it was possible to integrate their results into a single meta-dataset describing the value of electric service reliability observed in all of them. Once the datasets from the various studies were combined, a two-part regression model was used to estimate customer damage functions that can be generally applied to calculate customer interruption costs per event by season, time of day, day of week, and geographical regions within the U.S. for industrial, commercial, and residential customers. This report focuses on the backwards stepwise selection process that was used to develop the final revised model for all customer classes. Across customer classes, the revised customer interruption cost model has improved significantly because it incorporates more data and does not include the many extraneous variables that were in the original specification from the 2009 meta-analysis. The backwards stepwise selection process led to a more parsimonious model that only included key variables, while still achieving comparable out-of-sample predictive performance. In turn, users of interruption cost estimation tools such as the Interruption Cost Estimate (ICE) Calculator will have less customer characteristics information to provide and the associated inputs page will be far less cumbersome. The upcoming new version of the ICE Calculator is anticipated to be released in 2015.

  20. Electricity without carbon dioxide: Assessing the role of carbon capture and sequestration in United States electric markets

    Science.gov (United States)

    Johnson, Timothy Lawrence

    2002-09-01

    Stabilization of atmospheric greenhouse gas concentrations will likely require significant cuts in electric sector carbon dioxide (CO2) emissions. The ability to capture and sequester CO2 in a manner compatible with today's fossil-fuel based power generating infrastructure offers a potentially low-cost contribution to a larger climate change mitigation strategy. This thesis fills a niche between economy-wide studies of CO 2 abatement and plant-level control technology assessments by examining the contribution that carbon capture and sequestration (CCS) might make toward reducing US electric sector CO2 emissions. The assessment's thirty year perspective ensures that costs sunk in current infrastructure remain relevant and allows time for technological diffusion, but remains free of assumptions about the emergence of unidentified radical innovations. The extent to which CCS might lower CO2 mitigation costs will vary directly with the dispatch of carbon capture plants in actual power-generating systems, and will depend on both the retirement of vintage capacity and competition from abatement alternatives such as coal-to-gas fuel switching and renewable energy sources. This thesis therefore adopts a capacity planning and dispatch model to examine how the current distribution of generating units, natural gas prices, and other industry trends affect the cost of CO2 control via CCS in an actual US electric market. The analysis finds that plants with CO2 capture consistently provide significant reductions in base-load emissions at carbon prices near 100 $/tC, but do not offer an economical means of meeting peak demand unless CO2 reductions in excess of 80 percent are required. Various scenarios estimate the amount by which turn-over of the existing generating infrastructure and the severity of criteria pollutant constraints reduce mitigation costs. A look at CO2 sequestration in the seabed beneath the US Outer Continental Shelf (OCS) complements this model

  1. Online medical professionalism: patient and public relationships: policy statement from the American College of Physicians and the Federation of State Medical Boards.

    Science.gov (United States)

    Farnan, Jeanne M; Snyder Sulmasy, Lois; Worster, Brooke K; Chaudhry, Humayun J; Rhyne, Janelle A; Arora, Vineet M

    2013-04-16

    User-created content and communications on Web-based applications, such as networking sites, media sharing sites, or blog platforms, have dramatically increased in popularity over the past several years, but there has been little policy or guidance on the best practices to inform standards for the professional conduct of physicians in the digital environment. Areas of specific concern include the use of such media for nonclinical purposes, implications for confidentiality, the use of social media in patient education, and how all of this affects the public's trust in physicians as patient-physician interactions extend into the digital environment. Opportunities afforded by online applications represent a new frontier in medicine as physicians and patients become more connected. This position paper from the American College of Physicians and the Federation of State Medical Boards examines and provides recommendations about the influence of social media on the patient-physician relationship, the role of these media in public perception of physician behaviors, and strategies for physician-physician communication that preserve confidentiality while best using these technologies.

  2. Investigation of the attenuation properties of the HV board grid of electric-powered vehicles; Untersuchung der Daempfungseigenschaften des Hochvoltbordnetzes in Elektrofahrzeugen

    Energy Technology Data Exchange (ETDEWEB)

    Obholz, Martin; Baerenfaenger, Joerg [EMC Test NRW GmbH, Dortmund (Germany); Maarleveld, Marc; Hirsch, Holger [Duisburg Univ. (Germany). Lehrstuhl fuer Energietransport und -speicherung

    2012-11-01

    Power electronics components with transient switching processes cause AC components in the HV on-board supply system, with current and voltage harmonics with frequencies in the two-digit MHz range. Depending on their length and design, the HV lines can act as effective antenna structures. It is already common to shield HV lines for better EMP but the shield should be continued also in the connected casings. Material characteristics must be considered for weight and cost optimisation. For this reason, shield attenuation dimensions are calculated for exemplary casings for the frequency ranges that are relevant in electromobility. Afater this, the intrinsic sheild attenuation values of three different materials are measured in the frequency range of 10 - 100 MHz, and their relevance for applications in electormobility is assessed. The coaxial HV lines differ from other coaxial lines in their system characteristics; coupling attenuation and transfer impedance are important characteristics. To measure these characteristics, measuring tools must be adapted to the concrete applications. The methodology and the identified characteristics are discussed in detail. [German] Baugruppen der Leistungselektronik mit transienten Schaltvorgaengen verursachen Wechselspannungsanteile im Hochvoltbordnetz, die Strom- und Spannungsoberschwingungen mit Frequenzauspraegungen bis in den zweistelligen MHz-Bereich zeigen. Die Hochvoltleitungen koennen dann abhaengig von Laenge und Ausfuehrung als effektive Antennenstrukturen agieren. Zur Einhaltung der elektromagnetischen Vertraeglichkeit, werden bereits Schirmungen der Hochvoltleitungen eingesetzt. Jedoch muss fuer eine effektive elektromagnetische Entkopplung die Schirmung auch in den angeschlossenen Gehaeusen konsequent weitergefuehrt werden. Hierbei sind materialspezifische Anforderungen zu beachten, die Gewichts- und Kostenoptimierungen unterliegen. Daher wird fuer die in der Elektromobilitaet relevanten Frequenzbereiche eine

  3. Southeast Regional Assessment Study: an assessment of the opportunities of solar electric power generation in the Southeastern United States

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    The objective of this study was to identify and assess opportunities for demonstration and large scale deployment of solar electric facilities in the southeast region and to define the technical, economic, and institutional factors that can contribute to an accelerated use of solar energy for electric power generation. Graphs and tables are presented indicating the solar resource potential, siting opportunities, energy generation and use, and socioeconomic factors of the region by state. Solar electric technologies considered include both central station and dispersed solar electric generating facilities. Central stations studied include solar thermal electric, wind, photovoltaic, ocean thermal gradient, and biomass; dispersed facilities include solar thermal total energy systems, wind, and photovoltaic. The value of solar electric facilities is determined in terms of the value of conventional facilities and the use of conventional fuels which the solar facilities can replace. Suitable cost and risk sharing mechanisms to accelerate the commercialization of solar electric technologies in the Southeast are identified. The major regulatory and legal factors which could impact on the commercialization of solar facilities are reviewed. The most important factors which affect market penetration are reviewed, ways to accelerate the implementation of these technologies are identified, and market entry paths are identified. Conclusions and recommendations are presented. (WHK)

  4. Classical states of an electric dipole in an external magnetic field: Complete solution for the center of mass and trapped states

    Energy Technology Data Exchange (ETDEWEB)

    Atenas, Boris; Pino, Luis A. del; Curilef, Sergio, E-mail: scurilef@ucn.cl

    2014-11-15

    We study the classical behavior of an electric dipole in the presence of a uniform magnetic field. Using the Lagrangian formulation, we obtain the equations of motion, whose solutions are represented in terms of Jacobi functions. We also identify two constants of motion, namely, the energy E and a pseudomomentumC{sup →}. We obtain a relation between the constants that allows us to suggest the existence of a type of bound states without turning points, which are called trapped states. These results are consistent with and complementary to previous results. - Highlights: • Bound states without turning points. • Lagrangian Formulation for an electric dipole in a magnetic field. • Motion of the center of mass and trapped states. • Constants of motion: pseudomomentum and energy.

  5. Electricity consumers under the state and the private sector: comparing the price performance of the French and UK electricity industries 1990-2000

    International Nuclear Information System (INIS)

    Percebois, Jacques; Wright, Philip

    2001-01-01

    Particularly because a preoccupation with process has tended to dominate the debate about electricity privatisation and liberalisation, this paper focuses on price outcomes by comparing the relative price performance of the French and UK electricity industries between 1990 and 2000. The main conclusion is that in 1990 the state-owned French electricity industry was performing better for most consumers than the state-owned UK industry, and a decade later it was still doing so with respect to the privately-owned UK industry. While this conclusion could be qualified by saying that, heavily prompted or assisted by the Regulator, the UK privately-owned industry has shown itself capable of achieving faster reductions in prices to close the gap between itself and the French, this achievement has been concentrated in the industrial market and even there the very significant gains were mainly restricted to the very largest consumers. In the context of the European Union the UK is shown to have performed relatively poorly for the smallest domestic consumers and, while both countries did much better in the rankings of industrial prices, they were still a long way behind the top performers. (Author)

  6. The environmental and efficiency effects of restructuring on the electric power sector in the United States. An empirical analysis

    International Nuclear Information System (INIS)

    Sharabaroff, Alexander; Boyd, Roy; Chimeli, Ariaster

    2009-01-01

    Recent measures to restructure the electric power sector in different US states have raised the interest of policy makers, commentators, and the general public as to the actual impact of restructuring on both the economy and the environment. This paper focuses on two aspects of restructuring, namely its potential impact on the efficiency of electricity generation and air pollution. Our empirical results suggest that restructuring contributes to improved efficiency of electricity generation and better air quality through reduced electricity-induced sulfur dioxide (SO 2 ) and carbon dioxide (CO 2 ) emissions, although no effect was found for emissions of nitrous oxides (NO x ). These results, in turn could have important implications for policy in this area. (author)

  7. Europe-United States: two diverging evolutions of electricity restructuring? a prospective study on the functioning and the regulation of electrical markets on both sides of the Atlantic

    International Nuclear Information System (INIS)

    Derdevet, M.; Veyrenc, Th.

    2008-01-01

    On both sides of the Atlantic, the same broad purpose was at the heart of electricity restructuring policies: substituting competition to the monopolistic organisation as a means of increased efficiency, and transforming sets of local markets into large continental-wide integrated markets. The current diversity between European and American systems is thus intriguing. The relative homogeneity of electrical systems in the old continent, which is being reinforced by the gradual though delicate elaboration of shared principles on the general organisation of the electricity industry at the European level, compares to a genuine diversity on the American side, where each State remains responsible for conducting its own restructuring policy, even if similar rules on wholesale markets are acknowledged and implemented at a federal level. Yet Europe and the United States face the same kind of issues regarding the future of the energy industry: which status for grid operators, how to respond to growing concerns on security of supply, what to do to mitigate the sharp increase in energy prices? Evidence thereof are the similar attempts by some States to retain direct price control methods, rather than to bank on the virtues of competition to prompt investments in generation and lead prices to drop. It currently appears that the answers to these shared challenges are not converging. On behalf of a comparatively strong freedom of action relatively to the initial competitive paradigm, the array of polio/ responses available in the United States seems broader than in Europe, where the approach recommended by the European Commission consists of further deepening the initial model without altering it. The future will show whether that trend is lasting, or if two structurally different models can emerge from such differences. (authors)

  8. Supervised chaos genetic algorithm based state of charge determination for LiFePO4 batteries in electric vehicles

    Science.gov (United States)

    Shen, Yanqing

    2018-04-01

    LiFePO4 battery is developed rapidly in electric vehicle, whose safety and functional capabilities are influenced greatly by the evaluation of available cell capacity. Added with adaptive switch mechanism, this paper advances a supervised chaos genetic algorithm based state of charge determination method, where a combined state space model is employed to simulate battery dynamics. The method is validated by the experiment data collected from battery test system. Results indicate that the supervised chaos genetic algorithm based state of charge determination method shows great performance with less computation complexity and is little influenced by the unknown initial cell state.

  9. Excited state electric dipole moment of 5-hydroxy indole and 5-hydroxy indole 3-acetic acid through solvatochromic shifts

    International Nuclear Information System (INIS)

    Rani, G. Neeraja; Ayachit, Narasimha H.

    2010-01-01

    The determination of excited state electric dipole moment through solvatochromic shifts is one of the easiest approaches to understand the molecular structure in the excited state. These studies have gained importance due to their application in photo science, especially if they are of biological importance. In view of this the excited state electric dipole moments of two substituted indoles which are of biological importance are determined and reported here. The fluorescence shifts have been used and the results found seem to be more consistent in comparison with the one calculated through absorption shifts. The results presented are also discussed. A qualitative estimate of the orientation of the dipole moments in ground and excited state are also presented and discussed. The method proposed by Ayachit and Neeraja Rani is used in view of the several advantages it has.

  10. State-of-the-art assessment of requirements for attachments of WiFi equipments to electric utility facilities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    Electric utilities are receiving a growing number of requests to attach WiFi equipment to their systems. However, many utilities are not prepared to meet these requests because they have not had enough time to formally review and comment on the particular issues associated with Wi-Fi attachments. Although electric utilities are required to allow the attachments, there is no uniform standard to govern those attachments. This paper discussed the state-of-the-art philosophies and requirements of electric utilities who have allowed WiFi equipment on their systems. The advantages and limitations of each philosophy or practice were also discussed. The requirements for codes and standards in the United States and Canada for high voltage construction were also evaluated.

  11. Role of band states and trap states in the electrical properties of organic semiconductors: Hopping versus mobility edge model

    KAUST Repository

    Mehraeen, Shafigh; Coropceanu, Veaceslav; Bré das, Jean-Luc

    2013-01-01

    We compare the merits of a hopping model and a mobility edge model in the description of the effect of charge-carrier concentration on the electrical conductivity, carrier mobility, and Fermi energy of organic semiconductors. We consider the case

  12. A Practical Circuit-based Model for State of Health Estimation of Li-ion Battery Cells in Electric Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Lam, Long

    2011-08-23

    In this thesis the development of the state of health of Li-ion battery cells under possible real-life operating conditions in electric cars has been characterised. Furthermore, a practical circuit-based model for Li-ion cells has been developed that is capable of modelling the cell voltage behaviour under various operating conditions. The Li-ion cell model can be implemented in simulation programs and be directly connected to a model of the rest of the electronic system in electric vehicles. Most existing battery models are impractical for electric vehicle system designers and require extensive background knowledge of electrochemistry to be implemented. Furthermore, many models do not take the effect of regenerative braking into account and are obtained from testing fully charged cells. However, in real-life applications electric vehicles are not always fully charged and utilise regenerative braking to save energy. To obtain a practical circuit model based on real operating conditions and to model the state of health of electric vehicle cells, numerous 18650 size LiFePO4 cells have been tested under possible operating conditions. Capacity fading was chosen as the state of health parameter, and the capacity fading of different cells was compared with the charge processed instead of cycles. Tests have shown that the capacity fading rate is dependent on temperature, charging C-rate, state of charge and depth of discharge. The obtained circuit model is capable of simulating the voltage behaviour under various temperatures and C-rates with a maximum error of 14mV. However, modelling the effect of different temperatures and C-rates increases the complexity of the model. The model is easily adjustable and the choice is given to the electric vehicle system designer to decide which operating conditions to take into account. By combining the test results for the capacity fading and the proposed circuit model, recommendations to optimise the battery lifetime are proposed.

  13. 78 FR 1851 - New England States Committee on Electricity v. ISO New England Inc.; Notice of Complaint

    Science.gov (United States)

    2013-01-09

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. EL13-34-000] New England States Committee on Electricity v. ISO New England Inc.; Notice of Complaint Take notice that on December... (Complainant) filed a formal complaint against ISO New England Inc. (Respondent) alleging that the Respondent's...

  14. The state of energy storage in electric utility systems and its effect on renewable energy resources

    Energy Technology Data Exchange (ETDEWEB)

    Rau, N S

    1994-08-01

    This report describes the state of the art of electric energy storage technologies and discusses how adding intermittent renewable energy technologies (IRETs) to a utility network affects the benefits from storage dispatch. Load leveling was the mode of storage dispatch examined in the study. However, the report recommended that other modes be examined in the future for kilowatt and kilowatt-hour optimization of storage. The motivation to install storage with IRET generation can arise from two considerations: reliability and enhancement of the value of energy. Because adding storage increases cost, reliability-related storage is attractive only if the accruing benefits exceed the cost of storage installation. The study revealed that the operation of storage should not be guided by the output of the IRET but rather by system marginal costs. Consequently, in planning studies to quantify benefits, storage should not be considered as an entity belonging to the system and not as a component of IRETS. The study also indicted that because the infusion of IRET energy tends to reduce system marginal cost, the benefits from load leveling (value of energy) would be reduced. However, if a system has storage, particularly if the storage is underutilized, its dispatch can be reoriented to enhance the benefits of IRET integration.

  15. The impact of federal incentives on the adoption of hybrid electric vehicles in the United States

    International Nuclear Information System (INIS)

    Jenn, Alan; Azevedo, Inês L.; Ferreira, Pedro

    2013-01-01

    Starting in 2004, the federal government in the United States offered several nationwide incentives to consumers to increase the adoption of hybrid electric vehicles. This study assesses the effectiveness of the Energy Policy Act of 2005 in this regard using econometric methods and data between 2000 and 2010. Our model accounts for network externalities by using lagged sales as an independent variable. This approach helps to capture the exponential initial growth associated with the diffusion of new technologies and avoids overestimating the effect of the policy incentives. Our results show that the Energy Policy Act of 2005 increased the sales of hybrids from 3% to 20% depending on the vehicle model considered. In addition, we find that this incentive is only effective when the amount provided is sufficiently large. - Highlights: • We collected data on monthly car sales by vehicle model for 11 years. • Econometric methods are used to model vehicle sales. • Inclusion of a lagged dependent variable is employed to control for natural growth. • Direct monetary incentives are found to be statistically insignificant. • Macro-effects of unemployment and gas prices are important for vehicle sales

  16. Integration of sampling based battery state of health estimation method in electric vehicles

    International Nuclear Information System (INIS)

    Ozkurt, Celil; Camci, Fatih; Atamuradov, Vepa; Odorry, Christopher

    2016-01-01

    Highlights: • Presentation of a prototype system with full charge discharge cycling capability. • Presentation of SoH estimation results for systems degraded in the lab. • Discussion of integration alternatives of the presented method in EVs. • Simulation model based on presented SoH estimation for a real EV battery system. • Optimization of number of battery cells to be selected for SoH test. - Abstract: Battery cost is one of the crucial parameters affecting high deployment of Electric Vehicles (EVs) negatively. Accurate State of Health (SoH) estimation plays an important role in reducing the total ownership cost, availability, and safety of the battery avoiding early disposal of the batteries and decreasing unexpected failures. A circuit design for SoH estimation in a battery system that bases on selected battery cells and its integration to EVs are presented in this paper. A prototype microcontroller has been developed and used for accelerated aging tests for a battery system. The data collected in the lab tests have been utilized to simulate a real EV battery system. Results of accelerated aging tests and simulation have been presented in the paper. The paper also discusses identification of the best number of battery cells to be selected for SoH estimation test. In addition, different application options of the presented approach for EV batteries have been discussed in the paper.

  17. Uncovering edge states and electrical inhomogeneity in MoS2 field-effect transistors.

    Science.gov (United States)

    Wu, Di; Li, Xiao; Luan, Lan; Wu, Xiaoyu; Li, Wei; Yogeesh, Maruthi N; Ghosh, Rudresh; Chu, Zhaodong; Akinwande, Deji; Niu, Qian; Lai, Keji

    2016-08-02

    The understanding of various types of disorders in atomically thin transition metal dichalcogenides (TMDs), including dangling bonds at the edges, chalcogen deficiencies in the bulk, and charges in the substrate, is of fundamental importance for TMD applications in electronics and photonics. Because of the imperfections, electrons moving on these 2D crystals experience a spatially nonuniform Coulomb environment, whose effect on the charge transport has not been microscopically studied. Here, we report the mesoscopic conductance mapping in monolayer and few-layer MoS2 field-effect transistors by microwave impedance microscopy (MIM). The spatial evolution of the insulator-to-metal transition is clearly resolved. Interestingly, as the transistors are gradually turned on, electrical conduction emerges initially at the edges before appearing in the bulk of MoS2 flakes, which can be explained by our first-principles calculations. The results unambiguously confirm that the contribution of edge states to the channel conductance is significant under the threshold voltage but negligible once the bulk of the TMD device becomes conductive. Strong conductance inhomogeneity, which is associated with the fluctuations of disorder potential in the 2D sheets, is also observed in the MIM images, providing a guideline for future improvement of the device performance.

  18. Simultaneous Observation of Hybrid States for Cyber-Physical Systems: A Case Study of Electric Vehicle Powertrain.

    Science.gov (United States)

    Lv, Chen; Liu, Yahui; Hu, Xiaosong; Guo, Hongyan; Cao, Dongpu; Wang, Fei-Yue

    2017-08-22

    As a typical cyber-physical system (CPS), electrified vehicle becomes a hot research topic due to its high efficiency and low emissions. In order to develop advanced electric powertrains, accurate estimations of the unmeasurable hybrid states, including discrete backlash nonlinearity and continuous half-shaft torque, are of great importance. In this paper, a novel estimation algorithm for simultaneously identifying the backlash position and half-shaft torque of an electric powertrain is proposed using a hybrid system approach. System models, including the electric powertrain and vehicle dynamics models, are established considering the drivetrain backlash and flexibility, and also calibrated and validated using vehicle road testing data. Based on the developed system models, the powertrain behavior is represented using hybrid automata according to the piecewise affine property of the backlash dynamics. A hybrid-state observer, which is comprised of a discrete-state observer and a continuous-state observer, is designed for the simultaneous estimation of the backlash position and half-shaft torque. In order to guarantee the stability and reachability, the convergence property of the proposed observer is investigated. The proposed observer are validated under highly dynamical transitions of vehicle states. The validation results demonstrates the feasibility and effectiveness of the proposed hybrid-state observer.

  19. Wind energy as a significant source of electricity for the United States

    International Nuclear Information System (INIS)

    Nix, R.G.

    1996-06-01

    This paper discusses wind energy and its potential to significantly impact the generation of electricity within the US. The principles and the equipment used to convert wind energy to electricity are described, as is the status of current technology. Markets and production projections are given. There is discussion of the advances required to reduce the selling cost of electricity generated from the wind from today's price of about $0.05 per kilowatt-hour to full cost-competitiveness with gas- and coal-based electricity

  20. Role of nuclear energy in the establishment of smart electricity networks in the United States

    International Nuclear Information System (INIS)

    Harding, Margaret

    2012-01-01

    The concept that smart grids are separate from, and conflict with, traditional grids has been discussed in recent times. A key fact that has to be understood is that in the current electricity grid of the US, electricity is generated as it is demanded. With the advent of intermittent power suppliers like wind and solar, and changing load curves due to increasing electricity usage (electric cars, more electrical appliances and equipment), the traditional methods of managing the grid are being significantly stressed. There are significant losses of electricity occurring in the current US transmission and distribution system as well as inflexibility for transmission of electricity across long distance required to use intermittent sources that are generally more available in the west at major population and industrial centers in the east. Smart grid is really about improving the reliability of the overall electricity supply. This entails managing supply as well as demand, but most importantly, the transmission and distribution of electricity. Nuclear energy tends to be used as base load supply. The reasons for this are primarily economic, though technology does play a role. The economic reasons center around the fact that nuclear is a capital intensive energy source. Nuclear and solar can work together in some interesting and more optimal ways. Because solar is tied to hours of daylight and tends to peak at midday when demand is starting to rise to peak as well, nuclear and solar can work as base load and peak demand response effectively.

  1. Solid State MEMS Thrusters Using Electrically Controlled Extinguishable Solid Propellant, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — ET Materials, LLC developed the first ever electrically controlled extinguishable solid propellant (ECESP). The original propellant developed under Air Force SBIR...

  2. An assessment of household electricity load curves and corresponding CO2 marginal abatement cost curves for Gujarat state, India

    International Nuclear Information System (INIS)

    Garg, Amit; Shukla, P.R.; Maheshwari, Jyoti; Upadhyay, Jigeesha

    2014-01-01

    Gujarat, a large industrialized state in India, consumed 67 TWh of electricity in 2009–10, besides experiencing a 4.5% demand–supply short-fall. Residential sector accounted for 15% of the total electricity consumption. We conducted load research survey across 21 cities and towns of the state to estimate residential electricity load curves, share of appliances by type and usage patterns for all types of household appliances at utility, geographic, appliance, income and end-use levels. The results indicate that a large scope exists for penetration of energy efficient devices in residential sector. Marginal Abatement Cost (MAC) curves for electricity and CO 2 were generated to analyze relative attractiveness of energy efficient appliance options. Results indicate that up to 7.9 TWh of electricity can be saved per year with 6.7 Mt-CO 2 emissions mitigation at negative or very low CO 2 prices of US$ 10/t-CO 2 . Despite such options existing, their penetration is not realized due to myriad barriers such as financial, institutional or awareness and therefore cannot be taken as baseline options for CO 2 emission mitigation regimes. - Highlights: • Residential sector provides focused mitigation opportunities. • Energy efficient space cooling is the main technology transition required. • Almost 26% residential load could be reduced by DSM measures. • Myriad barriers limit penetration of negative marginal cost efficient options

  3. Thermoelectric Devices: Solid-State Refrigerators and Electrical Generators in the Classroom

    Science.gov (United States)

    Winder, Edmund J.; Ellis, Arthur B.; Lisensky, George C.

    1996-10-01

    Thermoelectric devices are solid-state devices that convert thermal energy from a temperature gradient into electrical energy (the Seebeck effect) or convert electrical energy into a temperature gradient (the Peltier effect). The first application is used most notably in spacecraft power generation systems (for example, in Voyager I and II) and in thermocouples for temperature measurement, while the second application is largely used in specialized cooling applications. Both applications can be demonstrated in the lecture hall to illustrate thermodynamic principles in a compelling manner. They also provide insight into the workings of a high-tech system that is achieving more widespread consumer use. The most visible consumer use of thermoelectric devices utilizing the Peltier effect is in portable electric food coolers/warmers that plug into an automobile cigarette lighter. Conventional cooling systems such as those used in refrigerators utilize a compressor and a working fluid to transfer heat. Thermal energy is absorbed and released as the working fluid undergoes expansion and compression and changes phase from liquid to vapor and back, respectively (1). Semiconductor thermoelectric coolers (also known as Peltier coolers) offer several advantages over conventional systems. They are entirely solid-state devices, with no moving parts; this makes them rugged, reliable, and quiet. They use no ozone-depleting chlorofluorocarbons, potentially offering a more environmentally responsible alternative to conventional refrigeration. They can be extremely compact, much more so than compressor-based systems. Precise temperature control (screws have to be removed to access the thermoelectric module. The module comes equipped with finned aluminum heat sinks attached to both sides; one of these has to be detached in order to remove the module from the lid. The heat sink is then reattached to the module, as shown in Figure 1. Figure 1. Thermoelectric module with attached heat

  4. The state of the North-European electricity market. Attempt to a problem-oriented analysis

    International Nuclear Information System (INIS)

    Kaerrmarck, U.

    2001-11-01

    This analysis covers the period 2000-2005, plus a few longer prognoses. Most analyses that preceded the deregulation of the electricity market in Europe, held the opinion that the market, due to the important over capacity, would be characterized by a severe price competition and lead to a market restructuration with only a few large producers surviving. The need for new investments was considered to be limited. Even a growing demand for electricity would not disturb the price reductions. The development followed this scheme to a certain extent. The restructuring is taking place. The utilities EdF (France), ENI (Italy), E.On, RWE (both Germany) and Vattenfall (Sweden) are obtaining dominant positions on their largely extended markets. But the prices have been stabilized on a level above the marginal production costs, and the power surplus has been halved compared to 1998. Northern Europe is approaching a state with increasing prices and threatening power shortages. The producers have adapted to the new situation by exploiting the differences in production- and demand-structure in the different countries and the associated price differences. Producers in Germany have instead of competing with the price chosen to close down a number of plants with large investment needs and high operating costs. The energy policy of all countries in the region gives highest priority to investment in renewable energy sources, which can not replace all the capacity lost by closing fossil and nuclear power plants. The ambition of the power producers to regain control of the market and the political inclination to prioritize CO 2 -free power production has, in combination, led to a strengthening of the existing producers and denying market access for new larger actors. New base load production capacity will be needed in the long run, and investment decisions are needed in the near future, if risks for power shortages are to be avoided. Increasing prices will stimulate commercial

  5. PRODUCE BUYING AND MARKETING BOARDS IN NIGERIA: INTERROGATING THE FISCAL ROLE OF WESTERN NIGERIA MARKETING BOARD 1942-1962

    OpenAIRE

    Adeyinka Theresa Ajayi; Ajibade Idowu Samuel; Oladiti Abiodun Akeem

    2017-01-01

    Marketing Board system was one of the mechanisms of British colonial policy in Nigeria. Primary products were channeled through the Boards to Europe at the expense of both the Nigerian state and the farmers, the producers of these commodities. This study examines produce buying via Marketing Boards in Nigeria and specifically interrogates the fiscal role of Western Nigeria Marketing Board. It argues that the Marketing Boards, in spite of their exploitative nature was beneficial to the regiona...

  6. Response of the Shockley surface state to an external electrical field: A density-functional theory study of Cu(111)

    Science.gov (United States)

    Berland, K.; Einstein, T. L.; Hyldgaard, P.

    2012-01-01

    The response of the Cu(111) Shockley surface state to an external electrical field is characterized by combining a density-functional theory calculation for a slab geometry with an analysis of the Kohn-Sham wave functions. Our analysis is facilitated by a decoupling of the Kohn-Sham states via a rotation in Hilbert space. We find that the surface state displays isotropic dispersion, quadratic until the Fermi wave vector but with a significant quartic contribution beyond. We calculate the shift in energetic position and effective mass of the surface state for an electrical field perpendicular to the Cu(111) surface; the response is linear over a broad range of field strengths. We find that charge transfer occurs beyond the outermost copper atoms and that accumulation of electrons is responsible for a quarter of the screening of the electrical field. This allows us to provide well converged determinations of the field-induced changes in the surface state for a moderate number of layers in the slab geometry.

  7. Vehicle State Estimator based regenerative braking implementation on an electric vehicle to improve lateral vehicle stability

    NARCIS (Netherlands)

    Jansen, S.T.H.; van Boekel, J.J.P.; Iersel, van S.S.; Besselink, I.J.M.; Nijmeijer, H.

    2013-01-01

    The driving range of electric vehicles can be extended using regenerative braking. Regenerative braking uses the electric drive system, and therefore only the driven wheels, for decelerating the vehicle. Braking on one axle affects the stability of the vehicle, especially for road conditions with

  8. Realization of an automatic set up to measure electrical characteristic of solid state detectors

    International Nuclear Information System (INIS)

    Manfredotti, C.; Crosetto, D.; Gabutti, A.; Gervino, G.; Varesio, R.

    1986-01-01

    An automatic set-up is described to study electrical properties of silicon detectors for nuclear research. Particularly, I-V characteristics from silicon junction prototype detectors and amorphous samples to test the data acquisition system, are presented. This set-up joins a low cost to good versatility that makes it very useful in wide application ranges in silicon detector electrical characterization

  9. Board's system of publications. [National Radiological Protection Board

    Energy Technology Data Exchange (ETDEWEB)

    Gaines, M J [National Radiological Protection Board, Harwell (UK)

    1978-07-01

    The purpose of each of the several classes of publication issued by the National Radiological Protection Board is stated. The classes are: advice on standards for protection, emergency reference levels, technical reports, instrument evaluation reports, annual research and development reports, three-yearly reports on the work of the NRPB, miscellaneous specialist booklets, publications for the layman, radiological protection bulletin, information sheets, and brochures.

  10. The Board's Role in Financial Oversight. AGB Board Essentials Series

    Science.gov (United States)

    Krawitz, Natalie

    2015-01-01

    An often-volatile economy, changing demographics, and technological innovations in educational delivery are among the dramatic changes across higher education that have forced boards and institutions to question the viability of the existing business model. Flat or declining state support in real terms, lower investment returns in some years,…

  11. Donor impurity states and related optical response in a lateral coupled dot-ring system under applied electric field

    Energy Technology Data Exchange (ETDEWEB)

    Correa, J.D. [Departamento de Ciencias Básicas, Universidad de Medellín, Medellín (Colombia); Mora-Ramos, M.E. [Centro de Investigación en Ciencias, Instituto de Ciencias Básicas y Aplicadas, Universidad Autonoma del Estado de Morelos, Av. Universidad 1001, CP 62209 Cuernavaca, Morelos (Mexico); Duque, C.A., E-mail: cduque@fisica.udea.edu.co [Grupo de Materia Condensada-UdeA, Instituto de Física, Facultad de Ciencias Exactas y Naturales, Universidad de Antioquia UdeA, Calle 70 No. 52-21, Medellín (Colombia)

    2015-09-01

    A study on the effects of an externally applied electric field on the linear optical absorption and relative refractive index change associated with transitions between off-center donor impurity states in laterally coupled quantum dot-ring system is reported. Electron states are calculated within the effective mass and parabolic band approximations by means of an exact diagonalization procedure. The states and the optical response in each case show significant sensitivity to the geometrical distribution of confining energies as well as to the strength of the applied field.

  12. Donor impurity states and related optical response in a lateral coupled dot-ring system under applied electric field

    International Nuclear Information System (INIS)

    Correa, J.D.; Mora-Ramos, M.E.; Duque, C.A.

    2015-01-01

    A study on the effects of an externally applied electric field on the linear optical absorption and relative refractive index change associated with transitions between off-center donor impurity states in laterally coupled quantum dot-ring system is reported. Electron states are calculated within the effective mass and parabolic band approximations by means of an exact diagonalization procedure. The states and the optical response in each case show significant sensitivity to the geometrical distribution of confining energies as well as to the strength of the applied field

  13. The new Board of Governors

    International Nuclear Information System (INIS)

    1964-01-01

    Full text: Miss Blanche Margaret Meagher was elected chairman of the IAEA Board of Governors for 1964-65, after the new Board had been constituted at the Eighth Session of the General Conference in September. Since 1962 Miss Meagher has been Canadian Ambassador to Austria, and Canadian Governor of the Agency. Miss Meagher joined the Canadian Department of External Affairs in 1942, and has held a number of foreign diplomatic appointments; she has also served on Canadian delegations to the UN Educational, Scientific and Cultural Organization, the International Telecommunication Union, the Economic and Social Council of UN and the UN Disarmament Sub-Committee. The Vice-Chairmen of the Board are Mr. Wilhelm Billig (Poland) and Mr. Hassan M. Tohamy (UAR). Mr. Billig is Chairman of the State Council for Atomic Energy, and High Commissioner for Peaceful Uses of Atomic Energy. Mr. Tohamy is Ambassador to Austria, and Resident Representative to the Agency. Of the twelve elected members of the Board, five were chosen by the General Conference in 1964 for two years, viz. Argentina, Chile, Netherlands, Thailand and the United Arab Republic. Seven were elected in 1963: Afghanistan, China, Congo (Leopoldville), Morocco, Romania, Switzerland and Uruguay. The remaining thirteen members have been designated by the Board: Australia, Belgium, Brazil, Canada, Finland, France, India, Japan, Poland, South Africa, USSR, United Kingdom and United States. (author)

  14. Preserving the Legitimacy of Board Certification.

    Science.gov (United States)

    Hanemann, Michael S; Wall, Holly C; Dean, John A

    2017-06-01

    The aims of this discussion were to inform the medical community about the American Board of Cosmetic Surgery's ongoing attempts in Louisiana to achieve equivalency to American Board of Medical Specialties (ABMS) member boards so that its diplomates may use the term "board certified" in advertising and to ensure public safety by upholding the standards for medical board certification. In 2011, Louisiana passed a truth in medical advertising law, which was intended to protect the public by prohibiting the use of the term "board certified" by improperly credentialed physicians. An American Board of Cosmetic Surgery diplomate petitioned the Louisiana State Board of Medical Examiners to approve a rule that would establish a pathway to equivalency for non-ABMS member boards, whose diplomates have not completed training approved by the Accreditation Council for Graduate Medical Education (ACGME) in the specialty they are certifying. Physicians and physician organizations representing multiple specialties (facial plastic and reconstructive surgery, otolaryngology [head and neck surgery], orthopedic spine surgery, pediatric neurosurgery, dermatology, and plastic surgery) urged the Louisiana State Board of Medical Examiners to clarify its advertising policy, limiting the use of the term "board certified" to physicians who have completed ACGME-approved training in the specialty or subspecialty named in the certificate. The public equates the term "board certified" with the highest level of expertise in a medical specialty. When a certifying board does not require completion of ACGME or American Osteopathic Association (AOA)-accredited training in the specialty it certifies, the result is an unacceptable degree of variability in the education and training standards applied to its diplomates. Independent, third-party oversight of certifying boards and training programs is necessary to ensure quality standards are upheld. Any system that assesses a non-ABMS member or non

  15. Steady-state and dynamic evaluation of the electric propulsion system test bed vehicle on a road load simulator

    Science.gov (United States)

    Dustin, M. O.

    1983-01-01

    The propulsion system of the Lewis Research Center's electric propulsion system test bed vehicle was tested on the road load simulator under the DOE Electric and Hybrid Vehicle Program. This propulsion system, consisting of a series-wound dc motor controlled by an infinitely variable SCR chopper and an 84-V battery pack, is typical of those used in electric vehicles made in 1976. Steady-state tests were conducted over a wide range of differential output torques and vehicle speeds. Efficiencies of all of the components were determined. Effects of temperature and voltage variations on the motor and the effect of voltage changes on the controller were examined. Energy consumption and energy efficiency for the system were determined over the B and C driving schedules of the SAE J227a test procedure.

  16. Water use for electricity in the United States: an analysis of reported and calculated water use information for 2008

    International Nuclear Information System (INIS)

    Averyt, K; Meldrum, J; Macknick, J; Newmark, R; Rogers, J; Madden, N; Fisher, J

    2013-01-01

    Water use by the electricity sector represents a significant portion of the United States water budget (41% of total freshwater withdrawals; 3% consumed). Sustainable management of water resources necessitates an accurate accounting of all water demands, including water use for generation of electricity. Since 1985, the Department of Energy (DOE) Energy Information Administration (EIA) has collected self-reported data on water consumption and withdrawals from individual power generators. These data represent the only annual collection of water consumption and withdrawals by the electricity sector. Here, we compile publically available information into a comprehensive database and then calculate water withdrawals and consumptive use for power plants in the US. In effect, we evaluate the quality of water use data reported by EIA for the year 2008. Significant differences between reported and calculated water data are evident, yet no consistent reason for the discrepancies emerges. (letter)

  17. Steady-state analysis of the integrated natural gas and electric power system with bi-directional energy conversion

    DEFF Research Database (Denmark)

    Zeng, Qing; Fang, Jiakun; Li, Jinghua

    2016-01-01

    Nowadays, the electric power system and natural gas network are becoming increasingly coupled and interdependent. A harmonized integration of natural gas and electricity network with bi-directional energy conversion is expected to accommodate high penetration levels of renewables in terms of system...... flexibility. This work focuses on the steady-state analysis of the integrated natural gas and electric power system with bi-directional energy conversion. A unified energy flow formulation is developed to describe the nodal balance and branch flow in both systems and it is solved with the Newton......–Raphson method. Both the unification of units and the per-unit system are proposed to simplify the system description and to enhance the computation efficiency. The applicability of the proposed method is demonstrated by analyzing an IEEE-9 test system integrated with a 7-node natural gas network. Later, time...

  18. Joint Advisory Appeals Board report

    CERN Document Server

    Lalande, Amanda

    2018-01-01

    With regard to the internal appeal procedure, Article R VI 1.18 of the Staff Rules and Regulations states that unless the member of the personnel objects, (the) decision and report of the JAAB (Joint Advisory Appeals Board) shall be brought to the attention of the members of the personnel.

  19. Newly elected IAEA Board of Governors

    International Nuclear Information System (INIS)

    2000-01-01

    The document gives information about the election of 11 Member States to the IAEA Board of Governors, the 35-member policy-making body, during the 44th regular session of the IAEA's General Conference (18 - 22 September 2000, Austria Center, Vienna). The newly elected Member States are: Argentina, Egypt, Ghana, Ireland, Libyan Arab Jamahiriya, Mexico, Pakistan, Peru, Switzerland, Thailand, Ukraine. The other 24 Member States of the Board are also given

  20. Newly elected IAEA Board of Governors

    International Nuclear Information System (INIS)

    2001-01-01

    The document gives information about the election of 11 Member States to the IAEA Board of Governors, the 35-member policy-making body, during the 45th regular session of the IAEA's General Conference (17-21 September 2001, Austria Center, Vienna). The newly elected Member States are: Bulgaria, Burkina Faso, Chile, Colombia, Islamic Republic of Iran, Kuwait, Morocco, Philippines, Romania, Spain, and Turkey. The other 24 Member States of the Board are also given

  1. Electric generation situation through hybrid systems in Para state and perspectives in face of the global supply of electric power; Situacao da geracao eletrica atraves de sistemas hibridos no estado do Para e perspectivas frente a universalizacao da energia eletrica

    Energy Technology Data Exchange (ETDEWEB)

    Barbosa, Claudomiro Fabio de Oliveira; Pinho, Joao Tavares; Pereira, Edinaldo Jose da Silva; Galhardo, Marcos Andre Barros; Vale, Silvio Bispo do; Maranhao, Wilson Monteiro de Albuquerque [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Grupo de Estudos e Desenvolvimento de Alternativas Energeticas], e-mail: gedae@ufpa.br

    2004-07-01

    This work presents an analysis of the hybrid systems for electricity generation installed in the State of Para, emphasizing the profile of the supplied localities, the conversion technologies in the several configurations used for electric power generation, the social, economic and environmental impacts caused by such systems, the management and sustainability of the systems, and their perspectives in face of the global supply of electric power in Brazil. (author)

  2. The effects of electric power industry restructuring on the safety of nuclear power plants in the United States

    Science.gov (United States)

    Butler, Thomas S.

    Throughout the United States the electric utility industry is restructuring in response to federal legislation mandating deregulation. The electric utility industry has embarked upon an extraordinary experiment by restructuring in response to deregulation that has been advocated on the premise of improving economic efficiency by encouraging competition in as many sectors of the industry as possible. However, unlike the telephone, trucking, and airline industries, the potential effects of electric deregulation reach far beyond simple energy economics. This dissertation presents the potential safety risks involved with the deregulation of the electric power industry in the United States and abroad. The pressures of a competitive environment on utilities with nuclear power plants in their portfolio to lower operation and maintenance costs could squeeze them to resort to some risky cost-cutting measures. These include deferring maintenance, reducing training, downsizing staff, excessive reductions in refueling down time, and increasing the use of on-line maintenance. The results of this study indicate statistically significant differences at the .01 level between the safety of pressurized water reactor nuclear power plants and boiling water reactor nuclear power plants. Boiling water reactors exhibited significantly more problems than did pressurized water reactors.

  3. Renewable energy rebound effect?: Estimating the impact of state renewable energy financial incentives on residential electricity consumption

    Science.gov (United States)

    Stephenson, Beth A.

    Climate change is a well-documented phenomenon. If left unchecked greenhouse gas emissions will continue global surface warming, likely leading to severe and irreversible impacts. Generating renewable energy has become an increasingly salient topic in energy policy as it may mitigate the impact of climate change. State renewable energy financial incentives have been in place since the mid-1970s in some states and over 40 states have adopted one or more incentives at some point since then. Using multivariate linear and fixed effects regression for the years 2002 through 2012, I estimate the relationship between state renewable energy financial incentives and residential electricity consumption, along with the associated policy implications. My hypothesis is that a renewable energy rebound effect is present; therefore, states with renewable energy financial incentives have a higher rate of residential electricity consumption. I find a renewable energy rebound effect is present in varying degrees for each model, but the results do not definitively indicate how particular incentives influence consumer behavior. States should use caution when adopting and keeping renewable energy financial incentives as this may increase consumption in the short-term. The long-term impact is unclear, making it worthwhile for policymakers to continue studying the potential for renewable energy financial incentives to alter consumer behavior.

  4. Estimating State-Specific Contributions to PM2.5- and O3-Related Health Burden from Residential Combustion and Electricity Generating Unit Emissions in the United States.

    Science.gov (United States)

    Penn, Stefani L; Arunachalam, Saravanan; Woody, Matthew; Heiger-Bernays, Wendy; Tripodis, Yorghos; Levy, Jonathan I

    2017-03-01

    Residential combustion (RC) and electricity generating unit (EGU) emissions adversely impact air quality and human health by increasing ambient concentrations of fine particulate matter (PM 2.5 ) and ozone (O 3 ). Studies to date have not isolated contributing emissions by state of origin (source-state), which is necessary for policy makers to determine efficient strategies to decrease health impacts. In this study, we aimed to estimate health impacts (premature mortalities) attributable to PM 2.5 and O 3 from RC and EGU emissions by precursor species, source sector, and source-state in the continental United States for 2005. We used the Community Multiscale Air Quality model employing the decoupled direct method to quantify changes in air quality and epidemiological evidence to determine concentration-response functions to calculate associated health impacts. We estimated 21,000 premature mortalities per year from EGU emissions, driven by sulfur dioxide emissions forming PM 2.5 . More than half of EGU health impacts are attributable to emissions from eight states with significant coal combustion and large downwind populations. We estimate 10,000 premature mortalities per year from RC emissions, driven by primary PM 2.5 emissions. States with large populations and significant residential wood combustion dominate RC health impacts. Annual mortality risk per thousand tons of precursor emissions (health damage functions) varied significantly across source-states for both source sectors and all precursor pollutants. Our findings reinforce the importance of pollutant-specific, location-specific, and source-specific models of health impacts in design of health-risk minimizing emissions control policies. Citation: Penn SL, Arunachalam S, Woody M, Heiger-Bernays W, Tripodis Y, Levy JI. 2017. Estimating state-specific contributions to PM 2.5 - and O 3 -related health burden from residential combustion and electricity generating unit emissions in the United States. Environ

  5. Departmental Appeals Board Decisions

    Data.gov (United States)

    U.S. Department of Health & Human Services — Decisions issued by the Chair and Board Members of the Departmental Appeals Board concerning determinations in discretionary, project grant programs, including...

  6. Pilot Boarding Areas

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Pilot boarding areas are locations at sea where pilots familiar with local waters board incoming vessels to navigate their passage to a destination port. Pilotage is...

  7. Excited-states of hydrogenic-like impurities in InGaN–GaN spherical QD: Electric field effect

    Energy Technology Data Exchange (ETDEWEB)

    El Ghazi, Haddou, E-mail: hadghazi@gmail.com [LPS, Faculty of Sciences, Dhar EL Mehrez, B.P 1796 Atlas Fez (Morocco); Special Mathematics, CPGE Kénitra (Morocco); Jorio, Anouar [LPS, Faculty of Sciences, Dhar EL Mehrez, B.P 1796 Atlas Fez (Morocco)

    2013-12-01

    By means of a traditional Ritz variational method within the effective-mass and single parabolic band approximations, the excited-states energy with and without the existence of the impurity is performed. Externally applied electric field and system radius effects are considered in wurtzite (In,Ga)N–GaN spherical quantum dot with finite potential barrier. The normalized binding energy is also reported. Compared to the previous theoretical findings, a good agreement is shown.

  8. Excited-states of hydrogenic-like impurities in InGaN–GaN spherical QD: Electric field effect

    International Nuclear Information System (INIS)

    El Ghazi, Haddou; Jorio, Anouar

    2013-01-01

    By means of a traditional Ritz variational method within the effective-mass and single parabolic band approximations, the excited-states energy with and without the existence of the impurity is performed. Externally applied electric field and system radius effects are considered in wurtzite (In,Ga)N–GaN spherical quantum dot with finite potential barrier. The normalized binding energy is also reported. Compared to the previous theoretical findings, a good agreement is shown

  9. Steady-state analysis of a conceptual offshore wind turbine driven electricity and thermocline energy extraction plant

    OpenAIRE

    Buhagiar, Daniel; Sant, Tonio

    2014-01-01

    A system for using offshore wind energy to generate electricity and simultaneously extract thermal energy is proposed. This concept is based on an offshore wind turbine driven hydraulic pump supplying deep seawater under high pressure to a land based plant consisting of a hydroelectric power generation unit and heat exchanger. A steady-state system model is developed using empirical formulae. The mathematical model comprises the fundamental system sub-models that are categoris...

  10. Controlling electronics boards with PVSS

    CERN Document Server

    Jacobsson, Richard

    2005-01-01

    This paper addresses several aspects of implementing a control system for electronics boards in order to perform remote Field Programmable Gate Array (FPGA) programming, hardware configuration, register control, and monitoring, as well as interfacing it to an expert system. The paper presents an implementation, using the Distributed Information Management (DIM) package and the industrial SCADA system PVSS II from ETM, in which the access mechanisms to the board resources are completely generic and in which the device prescription and the handling of mapping between functional parameters and physical registers follow a common structure independent of the board type. The control system also incorporates mechanisms by which it may be controlled from a finite state machine based expert system. Finally the paper suggests an improvement in which the mapping between logical parameters and physical registers is represented by descriptors in the device description such that the translation can be handled by a common m...

  11. Alaskan Superintendent Turnover: Is There a Correlation between Anticipated Turnover and the Organizational Culture of School Boards in the State of Alaska

    Science.gov (United States)

    Herbert, David M. Q.

    2012-01-01

    The purpose of this study is to determine if a particular type of school board culture is predictive of Alaskan public school superintendents' intention to leave their positions. Cameron and Quinn's four types of organizational culture--hierarchy, market, clan, and adhocracy--serve as the model for the study, which surveyed Alaska's public school…

  12. HySDeP: a computational platform for on-board hydrogen storage systems – hybrid high-pressure solid-state and gaseous storage

    DEFF Research Database (Denmark)

    Mazzucco, Andrea; Rokni, Masoud

    2016-01-01

    A computational platform is developed in the Modelica® language within the DymolaTM environment to provide a tool for the design and performance comparison of on-board hydrogen storage systems. The platform has been coupled with an open source library for hydrogen fueling stations to investigate...

  13. The diverse strategies of american electricity companies in the face of de-monopolization of the electricity market

    International Nuclear Information System (INIS)

    Finon, D.; Serrato, G.

    2000-01-01

    The electricity boards in the United States of America have adopted new strategies clearly influenced by anterior regulations and by de-monopolization. Numerous mergers are only the most spectacular of these strategies, enabling the start-up handicap of size in face of new competition to be surmounted, and offering the advantage of bringing together the supply of gas and electricity. Two principal means of adaptation for the gas and electricity boards are their development in non-regulated production (equipment sharing, setting up of merchant plants), and their involvement in bulk trade and competitive retail sales; moreover some choose to specialize in electronuclear production on transport. Lastly, internationalization and diversification towards telecommunications are more frequent there than elsewhere. The purpose of this article is to characterize these strategies in comparison with those of the European electricity companies

  14. Ontario Energy Board 2005 survey of stakeholders

    International Nuclear Information System (INIS)

    2006-01-01

    A survey was conducted among members of the Ontario Energy Board's (OEB) various stakeholder groups in order to measure the Board's performance and to help the Board identify areas for improvement in the way it operates. The survey included telephone interviews with consumer groups, advocacy groups, the energy sector, electricity and gas distributors, financial organizations as well as other stakeholders. The topics addressed in the survey were key energy issues and priority issues; the perceived role of the OEB; the OEB strengths and weaknesses; the importance of various OEB functions; the overall performance of the OEB; an evaluation of OEB communication with industry and consumers; an evaluation of service quality; and, awareness and participation in regulatory policy initiatives. Respondents used a 10-point scale in their evaluation. This report presented the main findings and their interpretations. Major stakeholders identified electricity supply issues and the price of electricity as being the most important energy issues facing Ontario. This report also presented the detailed findings for questions regarding the lack of generator capacity, policy stability, the coal phase out program, electricity blackouts, conservation, electricity restructuring and investment. The major finding of the survey was an overall increase in satisfaction with the OEB's performance. It was suggested that the OEB can improve in timeliness and providing consumer information. The major areas of strength were found to be its professionalism in conducting hearings and the fairness of the Board's decisions and regulations. tabs

  15. In Defense of Boards

    NARCIS (Netherlands)

    B. Visser (Bauke); S. Dominguez Martinez (Silvia); O.H. Swank (Otto)

    2007-01-01

    textabstractIt is often assumed that bad corporate performance means a bad CEO. The task of a board of directors is then simple: dismiss the executive. If it fails to do so, the board is said to be indolent. We take a kinder approach to observed board behaviour and point to the problems even

  16. Electricity consumption and energy savings potential of video game consoles in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Hittinger, E.; Mullins, K.A.; Azevedo, I.L. [Department of Engineering and Public Policy, Carnegie Mellon University, Pittsburgh, PA 15213 (United States)

    2012-11-15

    Total energy consumption of video game consoles has grown rapidly in the past few decades due to rapid increases in market penetration, power consumption of the devices, and increasing usage driven by new capabilities. Unfortunately, studies investigating the energy impacts of these devices have been limited and potential responses, such as ENERGY STAR requirements, have been difficult to define and implement. We estimate that the total electricity consumption of video game consoles in the US was around 11 TWh in 2007 and 16 TWh in 2010 (approximately 1 % of US residential electricity consumption), an increase of almost 50 % in 3 years. However, any estimate of total game console energy consumption is highly uncertain, and we have determined that the key uncertainty is the unknown consumer behavior with regards to powering down the system after use. Even under this uncertainty, we demonstrate that the most effective energy-saving modification is incorporation of a default auto power down feature, which could reduce electricity consumption of game consoles by 75 % (10 TWh reduction of electricity in 2010), saving consumers over USD 1 billion annually in electricity bills. We conclude that using an auto power down feature for game consoles is at least as effective for reducing energy consumption as implementing a strict set of energy efficiency improvements for the devices, is much easier to implement given the nature of the video game console industry, and could be applied retroactively to currently deployed consoles through firmware updates.

  17. Is there a water–energy nexus in electricity generation? Long-term scenarios for the western United States

    International Nuclear Information System (INIS)

    Ackerman, Frank; Fisher, Jeremy

    2013-01-01

    Water is required for energy supply, and energy is required for water supply, creating problems as demand for both resources grows. We analyze this “water–energy nexus” as it affects long-run electricity planning in the western United States. We develop four scenarios assuming: no new constraints; limits on carbon emissions; limits on water use; and combined carbon and water limits. We evaluate these scenarios through 2100 under a range of carbon and water prices. The carbon-reducing scenarios become cost-effective at carbon prices of about $50–$70 per ton of CO 2 , moderately high but plausible within the century. In contrast, the water-conserving scenarios are not cost-effective until water prices reach thousands of dollars per acre-foot, well beyond foreseeable levels. This is due in part to the modest available water savings: our most and least water-intensive scenarios differ by less than 1% of the region's water consumption. Under our assumptions, Western electricity generation could be reshaped by the cost of carbon emissions, but not by the cost of water, over the course of this century. Both climate change and water scarcity are of critical importance, but only in the former is electricity generation central to the problem and its solutions. - Highlights: • We model long-run electricity supply and demand for the western United States. • We evaluate the costs of carbon-reducing and water-conserving scenarios. • Carbon-reducing scenarios become cost-effective at carbon prices of $50–70 per ton CO 2 . • Water-conserving scenarios are only cost-effective above $4000/acre-foot of water. • Electricity planning is central to climate policy, but much less so to water planning

  18. Board of Directors or Supervisory Board

    DEFF Research Database (Denmark)

    Werlauff, Erik

    2009-01-01

    The article analyses the legal consequences of the choice now available to Danish public limited companies, which can now opt for a two-tier management structure, in which the management board undertakes both the day-to-day and the overall management, while a supervisory board exercises control...... over the management board, including its appointment and dismissal. The article considers which companies a two-tier structure may be relevant for, and reviews the consequences for the composition, election and functioning of the company organs....

  19. Qualification of electrical equipment. A United States nuclear system supplier perspective

    International Nuclear Information System (INIS)

    Jordan, W.G.

    1978-01-01

    At Westinghouse Pressurized Water Reactor Systems Division (PWR-SD) qualification. of safety related electrical equipment can be segregated into three distinct generations: (1) the initial seismic and environmental qualification programs for electrical equipment (1969-1972); (2) the supplemental sismic and environmental qualification programs (1975-1977); and (3) the seismic and environmental qualification programs to meet IEEE-323-1974, IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations''(1975). The latter two programs (in a licensing framework), as they are most current, with emphasis on electrical equipment (e.g. transmitters, rack mounted equipment) as opposed to electro-mechanical equipment (valve operators, pump motors) are reviewed. (author)

  20. Future trends in electrical energy generation economics in the United States

    Science.gov (United States)

    Schmitt, R. W.; Fox, G. R.; Shah, R. P.; Stewart, P. J.; Vermilyea, D. A.

    1977-01-01

    Developments related to the economics of coal-fired systems in the U.S. are mainly considered. The historical background of the U.S. electric generation industry is examined and the U.S. electrical generation characteristics in the year 1975 are considered. It is pointed out that coal-fired power plants are presently the largest source of electrical energy generation in the U.S. Questions concerning the availability and quality of coal are investigated. Currently there are plans for converting some 50 large oil and gas-fired generating plants to coal, and it is expected that coal will be the fuel used in almost all fossil-fired base load additions to generating capacity. Aspects of advanced energy conversion from coal are discussed, taking into account the performance and economic potential of the energy conversion systems.

  1. Electric power supply and demand 1979 to 1988 for the contiguous United States as projected by the Regional Electric Reliability Councils in their April 1, 1979 long-range coordinated planning reports to the Department of Energy

    Energy Technology Data Exchange (ETDEWEB)

    Savage, N.; Graban, W.

    1979-12-01

    Information concerning bulk electric power supply and demand is summarized and reviewed. Electric-utility power-supply systems are composed of power sources, transmission and distribution facilities, and users of electricity. In the United States there are three such systems of large geographic extent that together cover the entire country. Subjects covered are: energy forecasts, peak demand forecasts, generating-capacity forecasts, purchases and sales of capacity, and transmission. Extensive data are compiled in 17 tables. Information in two appendices includes a general description of the Regional Electric Reliability Councils and US generating capacity as of June 30, 1979. 3 figures, 17 tables.

  2. Techniques for analyzing the impacts of certain electric-utility ratemaking and regulatory-policy concepts. Regulatory laws and policies. [State by state

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-08-01

    This report is a legal study prepared to provide a review of the substantive and procedural laws of each regulatory jurisdiction that may affect implementation of the PURPA standards, and to summarize the current state of consideration and implementation of policies and rate designs similar or identical to the PURPA standards by state regulatory agencies and nonregulated utilities. This report is divided into three sections. The first section, the Introduction, summarizes the standards promulgated by PURPA and the results of the legal study. The second section, State Regulatory Law and Procedure, summarizes for each state or other ratemaking jurisdiction: (1) general constitutional and statutory provisions affecting utility rates and conditions of service; (2) specific laws or decisions affecting policy or rate design issues covered by PURPA standards; and (3) statutes and decisions governing administrative procedures, including judicial review. A chart showing actions taken on the policy and rate design issues addressed by PURPA is also included for each jurisdiction, and citations to relevant authorities are presented for each standard. State statutes or decisions that specifically define a state standard similar or identical to a PURPA standard, or that refer to one of the three PURPA objectives, are noted. The third section, Nonregulated Electric Utilities, summarizes information available on nonregulated utilities, i.e., publicly or cooperatively owned utilities which are specifically exempted from state regulation by state law.

  3. Comparative costs of coal and nuclear-generated electricity in the united states

    International Nuclear Information System (INIS)

    Brandfon, W.W.

    1987-01-01

    This paper compares the future first-year operating costs and lifetime levelized costs of producing baseload coal- and nuclear-generated electricity under schedules shorter than those recently experienced at U.S. plants. Nuclear appears to have a clear economic advantage. Coal is favorable only when it is assumed that the units will operate at very low capacity factors and/or when the capital cost differential between nuclear and coal is increased far above the recent historical level. Nuclear is therefore a cost-competitive electric energy option for utilities and should be considered as an alternative to coal when large baseload capacity is required. (author)

  4. State of the art of superconducting fault current limiters and their application to the electric power system

    International Nuclear Information System (INIS)

    Morandi, Antonio

    2013-01-01

    Highlights: ► The state of the art of superconducting fault current limiters is reviewed. ► An innovative concept of FCL is discussed and the potential of MgB 2 is outlined. ► The use of FCL to allow more interconnection of MV bus-bar is discussed. ► The use of FCL to increase the immunity from voltage dips is discussed. ► The use of FCL to integrate more distributed generation is pointed out. -- Abstract: Modern electric power systems are becoming more and more complex in order to meet new needs. Nowadays a high power quality is mandatory and there is the need to integrate increasing amounts of on-site generation. All this translates in more sophisticated electric network with intrinsically high short circuit rate. This network is vulnerable in case of fault and special protection apparatus and procedures needs to be developed in order to avoid costly or even irreversible damage. A superconducting fault current limiter (SFCL) is a device with a negligible impedance in normal operating conditions that reliably switches to a high impedance state in case of extra-current. Such a device is able to increase the short circuit power of an electric network and to contemporarily eliminate the hazard during the fault. It can be regarded as a key component for future electric power systems. In this paper the state of the art of superconducting fault current limiters mature for applications is briefly resumed and the potential impact of this device on the paradigm of design and operation of power systems is analyzed. In particular the use of the FCL as a mean to allow more interconnection of MV bus-bars as well an increased immunity with respect to the voltage disturbances induced by critical customer is discussed. The possibility to integrate more distributed generation in the distribution grid is also considered

  5. A Novel Series Connected Batteries State of High Voltage Safety Monitor System for Electric Vehicle Application

    Directory of Open Access Journals (Sweden)

    Qiang Jiaxi

    2013-01-01

    Full Text Available Batteries, as the main or assistant power source of EV (Electric Vehicle, are usually connected in series with high voltage to improve the drivability and energy efficiency. Today, more and more batteries are connected in series with high voltage, if there is any fault in high voltage system (HVS, the consequence is serious and dangerous. Therefore, it is necessary to monitor the electric parameters of HVS to ensure the high voltage safety and protect personal safety. In this study, a high voltage safety monitor system is developed to solve this critical issue. Four key electric parameters including precharge, contact resistance, insulation resistance, and remaining capacity are monitored and analyzed based on the equivalent models presented in this study. The high voltage safety controller which integrates the equivalent models and control strategy is developed. By the help of hardware-in-loop system, the equivalent models integrated in the high voltage safety controller are validated, and the online electric parameters monitor strategy is analyzed and discussed. The test results indicate that the high voltage safety monitor system designed in this paper is suitable for EV application.

  6. Estimated Value of Service Reliability for Electric Utility Customers in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, M.J.; Mercurio, Matthew; Schellenberg, Josh

    2009-06-01

    Information on the value of reliable electricity service can be used to assess the economic efficiency of investments in generation, transmission and distribution systems, to strategically target investments to customer segments that receive the most benefit from system improvements, and to numerically quantify the risk associated with different operating, planning and investment strategies. This paper summarizes research designed to provide estimates of the value of service reliability for electricity customers in the US. These estimates were obtained by analyzing the results from 28 customer value of service reliability studies conducted by 10 major US electric utilities over the 16 year period from 1989 to 2005. Because these studies used nearly identical interruption cost estimation or willingness-to-pay/accept methods it was possible to integrate their results into a single meta-database describing the value of electric service reliability observed in all of them. Once the datasets from the various studies were combined, a two-part regression model was used to estimate customer damage functions that can be generally applied to calculate customer interruption costs per event by season, time of day, day of week, and geographical regions within the US for industrial, commercial, and residential customers. Estimated interruption costs for different types of customers and of different duration are provided. Finally, additional research and development designed to expand the usefulness of this powerful database and analysis are suggested.

  7. A novel series connected batteries state of high voltage safety monitor system for electric vehicle application.

    Science.gov (United States)

    Jiaxi, Qiang; Lin, Yang; Jianhui, He; Qisheng, Zhou

    2013-01-01

    Batteries, as the main or assistant power source of EV (Electric Vehicle), are usually connected in series with high voltage to improve the drivability and energy efficiency. Today, more and more batteries are connected in series with high voltage, if there is any fault in high voltage system (HVS), the consequence is serious and dangerous. Therefore, it is necessary to monitor the electric parameters of HVS to ensure the high voltage safety and protect personal safety. In this study, a high voltage safety monitor system is developed to solve this critical issue. Four key electric parameters including precharge, contact resistance, insulation resistance, and remaining capacity are monitored and analyzed based on the equivalent models presented in this study. The high voltage safety controller which integrates the equivalent models and control strategy is developed. By the help of hardware-in-loop system, the equivalent models integrated in the high voltage safety controller are validated, and the online electric parameters monitor strategy is analyzed and discussed. The test results indicate that the high voltage safety monitor system designed in this paper is suitable for EV application.

  8. Control and state estimation for energy recuperation in fully electric vehicles

    NARCIS (Netherlands)

    Falcone, P.; Lidberg, M.; Ólafsdóttir, J.M.; Jansen, S.T.H.; Iersel, S. van

    2011-01-01

    Energy recuperation in fully electric vehicles is mainly limited by the requirement to preserve vehicle stability but it is also dependent on the brake system design and the ability of the control system. The boundaries of vehicle stability are difficult to assess, and must be approached with care,

  9. Vehicle state estimator based regenerative braking implementation on an electric vehicle to improve lateral vehicle stability

    NARCIS (Netherlands)

    Jansen, S.T.H.; Boekel, J.J.P. van; Iersel, S.S. van; Besselink, I.J.M.; Nijmeijer, H.

    2013-01-01

    The driving range of electric vehicles can be extended using regenerative braking. Regenerative braking uses the elctric drive system, and therefore only the driven wheels, for decelerating the vehicle. Braking on one axle affects the stability of the vehicle, especially for road conditions with

  10. Performance analysis of a solar-powered solid state heat engine for electricity generation

    International Nuclear Information System (INIS)

    Long, Rui; Li, Baode; Liu, Zhichun; Liu, Wei

    2015-01-01

    A hybrid system consisting of a CPC (compound parabolic collector) system, a SOE (solid oxide electrolyzer) system and a PEMFC (proton exchange membrane fuel cell) system was proposed to harvest solar energy. And a sensitivity analysis was conducted to evaluate the system performance. The impacts of operating temperatures of the SOE and PEMFC system, and the direct irradiation intensity of the sun on the performance characteristics were systematically analyzed. Results revealed that there exists an optimal SOE operating temperature leading to the maximum power output and maximum electrical efficiency simultaneously. Larger operating temperature of the PEMFC resulted in larger power output and higher efficiency. There also existed optimal direct irradiation intensities leading to the maximum power output and maximum electrical efficiency. Furthermore, the performance of the proposed solar energy harvesting system for practical use in real-life was also simulated. This may serve a clean technology for electricity generation. - Highlights: • A hybrid system consisting of CPC, SOE and PEMFC is proposed to harvest solar energy. • A sensitivity analysis was conducted to evaluate the system performance. • Power output and electrical efficiency have maximum values. • Performance of the proposed hybrid system for practical use was simulated.

  11. Current State of Development of Electricity-Generating Technologies: A Literature Review

    Directory of Open Access Journals (Sweden)

    Manfred Lenzen

    2010-03-01

    Full Text Available Electricity is perhaps the most versatile energy carrier in modern economies, and it is therefore fundamentally linked to human and economic development. Electricity growth has outpaced that of any other fuel, leading to ever-increasing shares in the overall mix. This trend is expected to continue throughout the following decades, as large—especially rural—segments of the world population in developing countries start to climb the “energy ladder” and become connected to power grids. Electricity therefore deserves particular attention with regard to its contribution to global greenhouse gas emissions, which is reflected in the ongoing development of low-carbon technologies for power generation. The focus of this updated review of electricity-generating technologies is twofold: (a to provide more technical information than is usually found in global assessments on critical technical aspects, such as variability of wind power, and (b to capture the most recent findings from the international literature. This report covers eight technologies. Seven of these are generating technologies: hydro-, nuclear, wind, photovoltaic, concentrating solar, geothermal and biomass power. The remaining technology is carbon capture and storage. This selection is fairly representative for technologies that are important in terms of their potential capacity to contribute to a low-carbon world economy.

  12. Competition in the electricity supply industry. Experiences from Europe and the United States

    International Nuclear Information System (INIS)

    Olsen, O.J.

    1995-01-01

    Introducing competition in the electricity industry is a major social experiment. Historically, the industry has been heavily regulated, however, this is no longer the case. Production and sales are being opened for competition and separated from the network services, transmission and distribution. This book includes papers from a Nordic Conference held in September 1994 in Copenhagen. The conference was planned as a part of the Energy Research Programme under the Nordic Council of Ministers and the object was to discuss the Nordic experience of competition in the electricity industry in comparison with other Western countries. The U.K. was the first European country to introduce competition in its electricity industry. Norway came next and two other Nordic countries - Sweden and Finland - have decided to follow suit. The U.S. started earlier than the European countries opening for limited competition in power production. However, the background of the reforms and its approach in the U.S. is different from Europe and far less radical. The experience of two Central European countries - Germany and The Netherlands - is also included in this book. Both countries have many institutional similarities to the Nordic countries, but they are - together with Denmark - more hesitant about introducing competition in their electricity industries. (au)

  13. Adjoint-state inversion of electric resistivity tomography data of seawater intrusion at the Argentona coastal aquifer (Spain)

    Science.gov (United States)

    Fernández-López, Sheila; Carrera, Jesús; Ledo, Juanjo; Queralt, Pilar; Luquot, Linda; Martínez, Laura; Bellmunt, Fabián

    2016-04-01

    Seawater intrusion in aquifers is a complex phenomenon that can be characterized with the help of electric resistivity tomography (ERT) because of the low resistivity of seawater, which underlies the freshwater floating on top. The problem is complex because of the need for joint inversion of electrical and hydraulic (density dependent flow) data. Here we present an adjoint-state algorithm to treat electrical data. This method is a common technique to obtain derivatives of an objective function, depending on potentials with respect to model parameters. The main advantages of it are its simplicity in stationary problems and the reduction of computational cost respect others methodologies. The relationship between the concentration of chlorides and the resistivity values of the field is well known. Also, these resistivities are related to the values of potentials measured using ERT. Taking this into account, it will be possible to define the different resistivities zones from the field data of potential distribution using the basis of inverse problem. In this case, the studied zone is situated in Argentona (Baix Maresme, Catalonia), where the values of chlorides obtained in some wells of the zone are too high. The adjoint-state method will be used to invert the measured data using a new finite element code in C ++ language developed in an open-source framework called Kratos. Finally, the information obtained numerically with our code will be checked with the information obtained with other codes.

  14. The electric dipole moments in the ground states of gold oxide, AuO, and gold sulfide, AuS.

    Science.gov (United States)

    Zhang, Ruohan; Yu, Yuanqin; Steimle, Timothy C; Cheng, Lan

    2017-02-14

    The B 2 Σ - - X 2 Π 3/2 (0,0) bands of a cold molecular beam sample of gold monoxide, AuO, and gold monosulfide, AuS, have been recorded at high resolution both field free and in the presence of a static electric field. The observed electric field induced splittings and shifts were analyzed to produce permanent electric dipole moments, μ→ el , of 2.94±0.06 D and 2.22±0.05 D for the X 2 Π 3/2 (v = 0) states of AuO and AuS, respectively. A molecular orbital correlation diagram is used to rationalize the trend in ground state μ→ el values for AuX (X = F, Cl, O, and S) molecules. The experimentally determined μ→ el are compared to those computed at the coupled-cluster singles and doubles (CCSD) level augmented with a perturbative inclusion of triple excitations (CCSD(T)) level of theory.

  15. Research methods to develop Measures of Effectiveness of the United States Coast Guard`s Vessel Inspection and Boarding Program. Volume 2, Main report

    Energy Technology Data Exchange (ETDEWEB)

    Wheeler, T.; Cox, R. [Sandia National Labs., Albuquerque, NM (United States); Gawande, K. [New Mexico Univ., Albuquerque, NM (United States). Dept. of Economics; Stone, R.; Waisel, L.; Wallace, W.A. [Rensselaer Polytechnic Inst., Troy, New York (United States). Dept. of Decision Sciences and Engineering Systems

    1995-04-01

    The primary objective of this study is to provide Measures of Effectiveness (MOEs) of the US Coast Guard Marine Inspection and Boarding Program based on objective scientific methods. A secondary objective of the study is to provide USCG management with a methodologically and theoretically sound aid to effective policy decision-making. The MOEs constructed in this study are specific to the Marine Inspection and Boarding Program, but the methodology of the study is based on sound theoretical principles that are probably applicable to a range of USCG activities. Hence the methodology applied equally to other important USCG programs and can be similarly used to measure their effectiveness and as an aid to decision-making.

  16. 39 CFR 221.2 - Board of Governors.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Board of Governors. 221.2 Section 221.2 Postal Service UNITED STATES POSTAL SERVICE ORGANIZATION AND ADMINISTRATION GENERAL ORGANIZATION § 221.2 Board of Governors. (a) Composition. The Board of Governors consists of 11 members. Nine governors are appointed by...

  17. 50 CFR 100.13 - Board/agency relationships.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Board/agency relationships. 100.13 Section 100.13 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR... Structure § 100.13 Board/agency relationships. (a) General. (1) The Board, in making decisions or...

  18. Sustainable Electricity Supply Scenarios for West Africa. A Case Study Conducted by IAEA Member States in West Africa with the Support of the IAEA

    International Nuclear Information System (INIS)

    2016-06-01

    This publication covers topics relevant to Member States in the process of evaluation of future electricity supply options and strategies, from resource evaluation to electricity demand analysis and connections to overall social, economic and demographic developments. It is an outcome of a study carried out in West Africa, providing a coherent sub regional platform for the development of a robust policy framework for an enhanced and sustainable provision of electricity services to support socio economic growth

  19. Electric-field control of tri-state phase transformation with a selective dual-ion switch

    Science.gov (United States)

    Lu, Nianpeng; Zhang, Pengfei; Zhang, Qinghua; Qiao, Ruimin; He, Qing; Li, Hao-Bo; Wang, Yujia; Guo, Jingwen; Zhang, Ding; Duan, Zheng; Li, Zhuolu; Wang, Meng; Yang, Shuzhen; Yan, Mingzhe; Arenholz, Elke; Zhou, Shuyun; Yang, Wanli; Gu, Lin; Nan, Ce-Wen; Wu, Jian; Tokura, Yoshinori; Yu, Pu

    2017-06-01

    Materials can be transformed from one crystalline phase to another by using an electric field to control ion transfer, in a process that can be harnessed in applications such as batteries, smart windows and fuel cells. Increasing the number of transferrable ion species and of accessible crystalline phases could in principle greatly enrich material functionality. However, studies have so far focused mainly on the evolution and control of single ionic species (for example, oxygen, hydrogen or lithium ions). Here we describe the reversible and non-volatile electric-field control of dual-ion (oxygen and hydrogen) phase transformations, with associated electrochromic and magnetoelectric effects. We show that controlling the insertion and extraction of oxygen and hydrogen ions independently of each other can direct reversible phase transformations among three different material phases: the perovskite SrCoO3-δ (ref. 12), the brownmillerite SrCoO2.5 (ref. 13), and a hitherto-unexplored phase, HSrCoO2.5. By analysing the distinct optical absorption properties of these phases, we demonstrate selective manipulation of spectral transparency in the visible-light and infrared regions, revealing a dual-band electrochromic effect that could see application in smart windows. Moreover, the starkly different magnetic and electric properties of the three phases—HSrCoO2.5 is a weakly ferromagnetic insulator, SrCoO3-δ is a ferromagnetic metal, and SrCoO2.5 is an antiferromagnetic insulator—enable an unusual form of magnetoelectric coupling, allowing electric-field control of three different magnetic ground states. These findings open up opportunities for the electric-field control of multistate phase transformations with rich functionalities.

  20. Enhanced Electrical Conductivity of Molecularly p-Doped Poly(3-hexylthiophene) through Understanding the Correlation with Solid-State Order

    KAUST Repository

    Hynynen, Jonna; Kiefer, David; Yu, Liyang; Kroon, Renee; Munir, Rahim; Amassian, Aram; Kemerink, Martijn; Mü ller, Christian

    2017-01-01

    Molecular p-doping of the conjugated polymer poly(3-hexylthiophene) (P3HT) with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) is a widely studied model system. Underlying structure–property relationships are poorly understood because processing and doping are often carried out simultaneously. Here, we exploit doping from the vapor phase, which allows us to disentangle the influence of processing and doping. Through this approach, we are able to establish how the electrical conductivity varies with regard to a series of predefined structural parameters. We demonstrate that improving the degree of solid-state order, which we control through the choice of processing solvent and regioregularity, strongly increases the electrical conductivity. As a result, we achieve a value of up to 12.7 S cm–1 for P3HT:F4TCNQ. We determine the F4TCNQ anion concentration and find that the number of (bound + mobile) charge carriers of about 10–4 mol cm–3 is not influenced by the degree of solid-state order. Thus, the observed increase in electrical conductivity by almost 2 orders of magnitude can be attributed to an increase in charge-carrier mobility to more than 10–1 cm2 V–1 s–1. Surprisingly, in contrast to charge transport in undoped P3HT, we find that the molecular weight of the polymer does not strongly influence the electrical conductivity, which highlights the need for studies that elucidate structure–property relationships of strongly doped conjugated polymers.

  1. Enhanced Electrical Conductivity of Molecularly p-Doped Poly(3-hexylthiophene) through Understanding the Correlation with Solid-State Order

    KAUST Repository

    Hynynen, Jonna

    2017-10-11

    Molecular p-doping of the conjugated polymer poly(3-hexylthiophene) (P3HT) with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) is a widely studied model system. Underlying structure–property relationships are poorly understood because processing and doping are often carried out simultaneously. Here, we exploit doping from the vapor phase, which allows us to disentangle the influence of processing and doping. Through this approach, we are able to establish how the electrical conductivity varies with regard to a series of predefined structural parameters. We demonstrate that improving the degree of solid-state order, which we control through the choice of processing solvent and regioregularity, strongly increases the electrical conductivity. As a result, we achieve a value of up to 12.7 S cm–1 for P3HT:F4TCNQ. We determine the F4TCNQ anion concentration and find that the number of (bound + mobile) charge carriers of about 10–4 mol cm–3 is not influenced by the degree of solid-state order. Thus, the observed increase in electrical conductivity by almost 2 orders of magnitude can be attributed to an increase in charge-carrier mobility to more than 10–1 cm2 V–1 s–1. Surprisingly, in contrast to charge transport in undoped P3HT, we find that the molecular weight of the polymer does not strongly influence the electrical conductivity, which highlights the need for studies that elucidate structure–property relationships of strongly doped conjugated polymers.

  2. Impact of competitive electricity market on renewable generation technology choice and policies in the United States

    International Nuclear Information System (INIS)

    Sarkar, Ashok

    1999-01-01

    Market objectives based on private value judgments will conflict with social policy objectives toward environmental quality in an emerging restructured electricity industry. This might affect the choice of renewables in the future generation mix. The US electricity industry's long-term capacity planning and operations is simulated for alternative market paradigms to study this impact. The analysis indicates that the share of renewable energy generation sources would decrease and emissions would increase considerably in a more competitive industry, with greater impact occurring in a monopoly market. Alternative environmental policy options can overcome market failures and help achieve appropriate levels of renewable generation. An evaluation of these policies indicate their varying cost-effectiveness, with higher levels of intervention necessary if market power exists. (Author)

  3. Stressed state of a cement electrical insulation of a pulsed magnet

    International Nuclear Information System (INIS)

    Korenevskij, V.V.; Sugak, E.B.; Fedorenko, L.I.

    1985-01-01

    The stresses arising in cement electrical insulation of a pulsed magnet intended for separation and scanning of beam of secondary particles with 5-10 MeV energy are investigated during its switching. The magnet represents a single-turn construction. During its switching repulsion forces arise in copper buses which affect the core consisting of a set of iron plates. In its turn two cores trying to separate transmit impact load onto cement electrical insulation, the mechanical strength of which determines the construction durability on the whole. For selection of calculation technique the method of photoelasticity is used on models of transparent polymeric materials. Epoxy resin served as material for insulation model, duraluminium for the rest of magnet parts. It is concluded that the calculation technique for the magnet under investigation is a hingeless circular arc

  4. 39 CFR 3.5 - Delegation of authority by Board.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Delegation of authority by Board. 3.5 Section 3.5 Postal Service UNITED STATES POSTAL SERVICE THE BOARD OF GOVERNORS OF THE U.S. POSTAL SERVICE BOARD OF GOVERNORS (ARTICLE III) § 3.5 Delegation of authority by Board. As authorized by 39 U.S.C. 402, these bylaws...

  5. Analysis of drought impacts on electricity production in the Western and Texas interconnections of the United States.

    Energy Technology Data Exchange (ETDEWEB)

    Harto, C. B.; Yan, Y. E.; Demissie, Y. K.; Elcock, D.; Tidwell, V. C.; Hallett, K.; Macknick, J.; Wigmosta, M. S.; Tesfa, T. K. (Environmental Science Division); (Sandia National Laboratory); (National Renewable Energy Laboratory); (Pacific Northwest National Laboratory)

    2012-02-09

    Electricity generation relies heavily on water resources and their availability. To examine the interdependence of energy and water in the electricity context, the impacts of a severe drought to assess the risk posed by drought to electricity generation within the western and Texas interconnections has been examined. The historical drought patterns in the western United States were analyzed, and the risk posed by drought to electricity generation within the region was evaluated. The results of this effort will be used to develop scenarios for medium- and long-term transmission modeling and planning efforts by the Western Electricity Coordination Council (WECC) and the Electric Reliability Council of Texas (ERCOT). The study was performed in response to a request developed by the Western Governors Association in conjunction with the transmission modeling teams at the participating interconnections. It is part of a U.S. Department of Energy-sponsored, national laboratory-led research effort to develop tools related to the interdependency of energy and water as part of a larger interconnection-wide transmission planning project funded under the American Recovery and Reinvestment Act. This study accomplished three main objectives. It provided a thorough literature review of recent studies of drought and the potential implications for electricity generation. It analyzed historical drought patterns in the western United States and used the results to develop three design drought scenarios. Finally, it quantified the risk to electricity generation for each of eight basins for each of the three drought scenarios and considered the implications for transmission planning. Literature on drought impacts on electricity generation describes a number of examples where hydroelectric generation capacity has been limited because of drought but only a few examples of impact on thermoelectric generation. In all documented cases, shortfalls of generation were met by purchasing power

  6. Digital Grid: Transforming the Electric Power Grid into an Innovation Engine for the United States

    OpenAIRE

    Chakrabortty, Aranya; Huang, Alex

    2017-01-01

    The electric power grid is one of the largest and most complex infrastructures ever built by mankind. Modern civilization depends on it for industry production, human mobility, and comfortable living. However, many critical technologies such as the 60 Hz transformers were developed at the beginning of the 20th century and have changed very little since then.1 The traditional unidirectional power from the generation to the customer through the transmission-distribution grid has also changed no...

  7. Soil and groundwater VOCs contamination: How can electrical geophysical measurements help assess post-bioremediation state?

    Science.gov (United States)

    Kessouri, P.; Johnson, T. C.; Day-Lewis, F. D.; Slater, L. D.; Ntarlagiannis, D.; Johnson, C. D.

    2016-12-01

    The former Brandywine MD (Maryland, USA) Defense Reutilization and Marketing Office (DRMO) was designated a hazardous waste Superfund site in 1999. The site was used as a storage area for waste and excess government equipment generated by several U.S. Navy and U.S. Air Force installations, leading to soil and groundwater contamination by volatile organic compounds (VOCs). Active bioremediation through anaerobic reductive dehalogenation was used to treat the groundwater and the aquifer unconsolidated materials in 2008, with electrical geophysical measurements employed to track amendment injections. Eight years later, we used spectral induced polarization (SIP) and time domain induced polarization (TDIP) on 2D surface lines and borehole electrical arrays to assess the long term impact of active remediation on physicochemical properties of the subsurface. Within the aquifer, the treated zone is more electrically conductive, and the phase shift describing the polarization effects is higher than in the untreated zone. Bulk conductivity and phase shift are also locally elevated close to the treatment injection well, possibly due to biogeochemical transformations associated with prolonged bacterial activity. Observed SIP variations could be explained by the presence of biofilms coating the pore space and/or by-products of the chemical reactions catalyzed by the bacterial activity (e.g. iron sulfide precipitation). To investigate these possibilities, we conducted complementary well logging measurements (magnetic susceptibility [MS], nuclear magnetic resonance [NMR], gamma-ray) using 5 boreholes installed at both treated and untreated locations of the site. We also collected water and soil samples on which we conducted microbiological and chemical analyses, along with geophysical observations (SIP, MS and NMR), in the laboratory. These measurements provide further insights into the physicochemical transformations in the subsurface resulting from the treatment and highlight

  8. The convergence of electric power and natural gas industries. Mergers and acquisitions in the United States

    International Nuclear Information System (INIS)

    Meritet, S.

    2000-01-01

    Deep transformations have taken place in the US electric power industry, in terms of organisation and competition. The reforms of the regulation of this sector have changed the operation rules and, as an answer, the companies have adapted their behaviour. The reorganization is characterized by the combination between new competitive markets with new occupations. The deregulation and the technical progress accelerate the reconfiguration of the industry with the convergence of the natural gas and electric power activities. Since 1996, the numerous mergers-acquisitions between companies are representative of the tight links existing between the two energy sources. In this work, the convergence of the natural gas and power industries in the US is examined. The study of the reconciliation between power and gas companies (mainly the utilities) stresses on the improvement of the combined companies efficiency. The first part deals with the reconfiguration of the US power industry. The second part analyzes the consequences of the gas-electricity mergers and acquisitions. It includes the exploitation of financial data and a classical econometric test about the 'size-scale-spread' relation. The re-composition of the value chain is at the center of the industrial economy problem: it gives the opportunity for new forms of markets and firms. (J.S.)

  9. State of the Art and Trends Review of Smart Metering in Electricity Grids

    Directory of Open Access Journals (Sweden)

    Noelia Uribe-Pérez

    2016-02-01

    Full Text Available Climate change, awareness of energy efficiency, new trends in electricity markets, the obsolescence of the actual electricity model, and the gradual conversion of consumers to prosumer profiles are the main agents of progressive change in electricity systems towards the Smart Grid paradigm. The introduction of multiple distributed generation and storage resources, with a strong involvement of renewable energies, exposes the necessity of advanced metering or Smart Metering systems, able to manage and control those distributed resources. Due to the heterogeneity of the Smart Metering systems and the specific features of each grid, it is easy to find in the related literature a wide range of solutions with different features. This work describes the key elements in a Smart Metering system and compiles the most employed technologies and standards as well as their main features. Since Smart Metering systems can perform jointly with other activities, these growing initiatives are also addressed. Finally, a revision of the main trends in Smart Metering uses and deployments worldwide is included.

  10. Emissions implications of downscaled electricity generation scenarios for the western United States

    Energy Technology Data Exchange (ETDEWEB)

    Nsanzineza, Rene; O’Connell, Matthew; Brinkman, Gregory; Milford, Jana B.

    2017-10-01

    This study explores how emissions from electricity generation in the Western Interconnection region of the U.S. might respond in circa 2030 to contrasting scenarios for fuel prices and greenhouse gas (GHG) emissions fees. We examine spatial and temporal variations in generation mix across the region and year using the PLEXOS unit commitment and dispatch model with a production cost model database adapted from the Western Electricity Coordinating Council. Emissions estimates are computed by combining the dispatch model results with unit-specific, emissions-load relationships. Wind energy displaces natural gas and coal in scenarios with relatively expensive natural gas or with GHG fees. Correspondingly, annual emissions of NOx, SO2, and CO2 are reduced by 20-40% in these cases. NOx emissions, which are a concern as a precursor of ground-level ozone, are relatively high and consistent across scenarios during summer, when peak electricity loads occur and wind resources in the region are comparatively weak. Accounting for the difference in start-up versus stabilized NOx emissions rates for natural gas plants had little impact on region-wide emissions estimates due to the dominant contribution from coal-fired plants, but would be more important in the vicinity of the natural gas units.

  11. How much electricity really costs. Comparison of the state subsidisation and overall social costs of conventional and renewable energy resources

    International Nuclear Information System (INIS)

    Kuechler, Swantje; Meyer, Bettina

    2012-01-01

    This study explains how the costs of electricity are an aggregate of different components. The electricity price paid by the end consumer contains not only the actual costs of energy production, which make up only about a third of the actual price in an average household, but also different surcharges such as network charges, electricity tax, value added tax and the concession levy. It furthermore contains the allocation charge stipulated by the Renewable Energy Law (EEG reallocation charge) as a means of allocating the costs of the subsidisation of electricity from renewable resources to the consumers. On the other hand conventional energy resources such as nuclear energy, hard coal and brown coal have substantially benefited over many decades from state subsidies in the form of financial aids, tax rebates and other promotive measures. The main difference between this and the subsidisation of renewable energy is that the costs of conventional energy resources are largely charged to the state budget rather than being made transparent in the electricity price. Based on an evaluation of the literature, data, interviews and the authors' own methodological deliberations this study makes a systematic comparison of the direct as well as indirect state subsidisation of renewable and conventional energy resources during the period from 1970 until 2012. The annual totals obtained for each energy resources are then set in relation to the share of that resource in overall electricity production, yielding specific subsidisation rates in terms of cents per kWh for each resource. This does not yet take into account the high consequential costs in the form of environmental damage and climate-related damage caused by fossil and nuclear fuels as well as the risks associated with the latter (collectively referred to as ''external costs''), all of which are charged to the polluters only at a small fraction of the true amount. The two cost categories of state

  12. State of technology assessment for life extension of electrical and I and C equipment in nuclear power plants

    International Nuclear Information System (INIS)

    DuCharme, A.R.; Boger, R.M.; Meyer, L.C.; Beament, P.R.

    1988-01-01

    As part of the IEEE Working Group 3.4 on Nuclear Plant Life Extension, an assessment is made of the current state of technology for the life extension of certain classes of electrical and IandC equipment. The classes investigated include motors, cables, emergency diesel generators, penetrations, inverters/chargers, switchgear, and reactor protection systems. The work is focussed on assessment of current or recently completed RandD efforts to resolve issues affecting life extension of the equipment. Aspects discussed include the degree of resolution of these issues, potentially affected standards, and technical aspects requiring further research. 15 refs., 2 tabs

  13. State of technology assessment for life extension of electrical and I and C equipment in nuclear power plants

    International Nuclear Information System (INIS)

    Du Charme, A.R.; Boger, R.M.; Meyer, L.C.; Beament, P.R.

    1988-01-01

    As part of the IEEE Working Group 3.4 on Nuclear Plant Life Extension, an assessment is made of the current state of technology for the life extension of certain classes of electrical and I and C equipment. The classes investigated include motors, cables, emergency diesel generators, penetrations, inverters/charges, switchgear, and reactor protection systems. The work is focussed on assessment of current or recently completed R and D efforts to resolve issues affecting life extension of the equipment. Aspects discussed include the degree of resolution of these issues, potentially affected standards, and technical aspects requiring further research

  14. State-of-Charge Estimation and Active Cell Pack Balancing Design of Lithium Battery Power System for Smart Electric Vehicle

    Directory of Open Access Journals (Sweden)

    Z. C. Gao

    2017-01-01

    Full Text Available This paper presents an integrated state-of-charge (SOC estimation model and active cell balancing of a 12-cell lithium iron phosphate (LiFePO4 battery power system. The strong tracking cubature extended Kalman filter (STCEKF gave an accurate SOC prediction compared to other Kalman-based filter algorithms. The proposed groupwise balancing of the multiple SOC exhibited a higher balancing speed and lower balancing loss than other cell balancing designs. The experimental results demonstrated the robustness and performance of the battery when subjected to current load profile of an electric vehicle under varying ambient temperature.

  15. 75 FR 6637 - National Sea Grant Advisory Board

    Science.gov (United States)

    2010-02-10

    ... at the Washington Plaza Hotel, 10 Thomas Circle Northwest, Washington, DC. FOR FURTHER INFORMATION... INFORMATION: The Board, which consists of a balanced representation from academia, industry, state government...

  16. Competition and deregulation in the electric industry. A study of organizational change: The New York State Public Service Commission

    Science.gov (United States)

    Ashley, Deborah J. Cordaro

    2000-11-01

    Public organizations are formed in response to societal needs. They collect taxes, educate children, enforce laws and provide protection to the environment, the nation and consumers. One such organization is the New York State Public Service Commission. In 1907, legislation was passed to form the New York State Public Service Commission the first regulatory body of its kind in the United States. Its mission was to provide safe, reliable and reasonably priced electricity. Subsequently, this became the model that was implemented in every state in the nation. The past decade heralds an era of competition and a lessening of regulatory control. The telephone, natural gas and airline industries are in various stages of deregulation, and the electric industry is beginning down this path as well. In an environment such as this, are regulatory organizations necessary, and if they are, how can they organize to meet the new societal requirements? The case of the New York State Public Service Commission at this point in time offers a real time study of a regulatory body immersed in an environment that is calling for competition and an end to big government. Utilizing case studies of industries that have deregulated, or are in the process of deregulating, indicates a future societal need for regulations. This result does not lead to a conclusion that organizational change is unnecessary. This Dissertation will lay out the current organizational structure of the Public Service Commission, give an overview of the environmental signals, describe the mission/core values, and illustrate general political and employee factors that are indigenous to public service. Utilizing both classic and current organizational theory, an evaluation will be made of the Commission's need for change, their ability to change, and obstacles they may encounter.

  17. Survey cost of electric power generation from renewable resources in the state of Goias, Brazil

    International Nuclear Information System (INIS)

    Almeida, Ronaldo Pereira de; Bortoni, Edson da Costa; Haddad, Jamil

    2010-01-01

    The work presents a developed study to obtain the investment index costs for renewable based distributed generation in Goias state. A set of renewable resources was selected, along with their availability in each city of the state. Therefore, a rank of investments could be developed. (author)

  18. Electrically tunable robust edge states in graphene-based topological photonic crystal slabs

    Science.gov (United States)

    Song, Zidong; Liu, HongJun; Huang, Nan; Wang, ZhaoLu

    2018-03-01

    Topological photonic crystals are optical structures supporting topologically protected unidirectional edge states that exhibit robustness against defects. Here, we propose a graphene-based all-dielectric photonic crystal slab structure that supports two-dimensionally confined topological edge states. These topological edge states can be confined in the out-of-plane direction by two parallel graphene sheets. In the structure, the excitation frequency range of topological edge states can be dynamically and continuously tuned by varying bias voltage across the two parallel graphene sheets. Utilizing this kind of architecture, we construct Z-shaped channels to realize topological edge transmission with diffrerent frequencies. The proposal provides a new degree of freedom to dynamically control topological edge states and potential applications for robust integrated photonic devices and optical communication systems.

  19. Efficiency in the United States electric industry: Transaction costs, deregulation, and governance structures

    Science.gov (United States)

    Peterson, Carl

    Transaction costs economics (TCE) posits that firms have an incentive to bypass the market mechanisms in situations where the cost of using the market is prohibitive. Vertical integration, among other governance mechanisms, can be used to minimize the transactions costs associated with the market mechanism. The study analyses different governance mechanisms, which range from complete vertical integration to the use of market mechanisms, for firms in the US electric sector. This sector has undergone tremendous change in the past decade including the introduction of retail competition in some jurisdictions. As a result of the push toward deregulation of the industry, vertically integration, while still significant in the sector, has steadily been replaced by alternative governance structures. Using a sample of 136 investor-owned electric utilities that reported data the US Federal Energy Regulatory Commission between 1996 and 2002, this study estimates firm level efficiency using Data Envelopment Analysis (DEA) and relates these estimates to governance structure and public policies. The analysis finds that vertical integration is positively related to firm efficiency, although in a non-linear fashion suggesting that hybrid governance structures tend to be associated with lower efficiency scores. In addition, while some evidence is found for negative short-term effects on firm efficiency from the choice to deregulate, this result is sensitive to DEA model choice. Further, competition in retail markets is found to be positively related to firm level efficiency, but the retreat from deregulation, which occurred after 2000, is negatively associated with firm-level efficiency. These results are important in the ongoing academic and public policy debates concerning deregulation of the electric section and indicate that vertical economies remain in the industry, but that competition has provided incentives for improving firm level efficiency.

  20. Nonlinear exchange rate pass-through in timber products: the case of oriented strand board in Canada and the United States

    OpenAIRE

    Goodwin, Barry K.; Holt, Matthew T.; Prestemon, Jeffrey P.

    2012-01-01

    We assess exchange rate pass–through (ERPT) for U.S. and Canadian prices for oriented strand board (OSB), a wood panel product used extensively in U.S. residential construction. Because of its prominence in construction and international trade, OSB markets are likely sensitive to general economic conditions. In keeping with recent research (e.g., Al-Abri and Goodwin, 2009; Larue et al., 2010), we examine regime–specific ERPT effects; we use a smooth transition vector error correction model. W...

  1. Onsite and Electric Backup Capabilities at Critical Infrastructure Facilities in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, Julia A. [Argonne National Lab. (ANL), Argonne, IL (United States); Wallace, Kelly E. [Argonne National Lab. (ANL), Argonne, IL (United States); Kudo, Terence Y. [Argonne National Lab. (ANL), Argonne, IL (United States); Eto, Joseph H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-04-01

    The following analysis, conducted by Argonne National Laboratory’s (Argonne’s) Risk and Infrastructure Science Center (RISC), details an analysis of electric power backup of national critical infrastructure as captured through the Department of Homeland Security’s (DHS’s) Enhanced Critical Infrastructure Program (ECIP) Initiative. Between January 1, 2011, and September 2014, 3,174 ECIP facility surveys have been conducted. This study focused first on backup capabilities by infrastructure type and then expanded to infrastructure type by census region.

  2. Space Station Freedom electrical power system hardware commonality with the United States Polar Platform

    Science.gov (United States)

    Rieker, Lorra L.; Haraburda, Francis M.

    1989-01-01

    Information is presented on how the concept of commonality is being implemented with respect to electric power system hardware for the Space Station Freedom and the U.S. Polar Platform. Included is a historical account of the candidate common items which have the potential to serve the same power system functions on both Freedom and the Polar Platform. The Space Station program and objectives are described, focusing on the test and development responsibilities. The program definition and preliminary design phase and the design and development phase are discussed. The goal of this work is to reduce the program cost.

  3. Geothermal energy in the western United States and Hawaii: Resources and projected electricity generation supplies. [Contains glossary and address list of geothermal project developers and owners

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-01

    Geothermal energy comes from the internal heat of the Earth, and has been continuously exploited for the production of electricity in the United States since 1960. Currently, geothermal power is one of the ready-to-use baseload electricity generating technologies that is competing in the western United States with fossil fuel, nuclear and hydroelectric generation technologies to provide utilities and their customers with a reliable and economic source of electric power. Furthermore, the development of domestic geothermal resources, as an alternative to fossil fuel combustion technologies, has a number of associated environmental benefits. This report serves two functions. First, it provides a description of geothermal technology and a progress report on the commercial status of geothermal electric power generation. Second, it addresses the question of how much electricity might be competitively produced from the geothermal resource base. 19 figs., 15 tabs.

  4. Exciton states in zinc-blende GaN/AlGaN quantum dot: Effects of electric field and hydrostatic pressure

    International Nuclear Information System (INIS)

    Xia Congxin; Zeng Zaiping; Liu, Z.S.; Wei, S.Y.

    2010-01-01

    Based on the effective-mass approximation, the effects of the electric field and hydrostatic pressure on exciton states in a cylindrical zinc-blende (ZB) GaN/AlGaN quantum dot (QD) are investigated variationally. Numerical results show that the electric field leads to a remarkable reduction of the ground-state exciton binding energy and interband transition energy in the case of any hydrostatic pressures. However, the hydrostatic pressure increases the exciton binding energy and interband transition energy in the case of any electric fields. In particular, the electric field has a remarkable influence on the exciton binding energy in the QD with large dot size and small hydrostatic pressure; moreover, the hydrostatic pressure obviously affects the exciton binding energy in the QD with small dot size and weak electric field.

  5. Linear Extended State Observer-Based Motion Synchronization Control for Hybrid Actuation System of More Electric Aircraft

    Directory of Open Access Journals (Sweden)

    Xingjian Wang

    2017-10-01

    Full Text Available Moving towards the more electric aircraft (MEA, a hybrid actuator configuration provides an opportunity to introduce electromechanical actuator (EMA into primary flight control. In the hybrid actuation system (HAS, an electro-hydraulic servo actuator (EHSA and an EMA operate on the same control surface. In order to solve force fighting problem in HAS, this paper proposes a novel linear extended state observer (LESO-based motion synchronization control method. To cope with the problem of unavailability of the state signals required by the motion synchronization controller, LESO is designed for EHSA and EMA to observe the state variables. Based on the observed states of LESO, motion synchronization controllers could enable EHSA and EMA to simultaneously track the desired motion trajectories. Additionally, nonlinearities, uncertainties and unknown disturbances as well as the coupling term between EHSA and EMA can be estimated and compensated by using the extended state of the proposed LESO. Finally, comparative simulation results indicate that the proposed LESO-based motion synchronization controller could reduce significant force fighting between EHSA and EMA.

  6. Linear Extended State Observer-Based Motion Synchronization Control for Hybrid Actuation System of More Electric Aircraft

    Science.gov (United States)

    Liao, Rui; Shi, Cun; Wang, Shaoping

    2017-01-01

    Moving towards the more electric aircraft (MEA), a hybrid actuator configuration provides an opportunity to introduce electromechanical actuator (EMA) into primary flight control. In the hybrid actuation system (HAS), an electro-hydraulic servo actuator (EHSA) and an EMA operate on the same control surface. In order to solve force fighting problem in HAS, this paper proposes a novel linear extended state observer (LESO)-based motion synchronization control method. To cope with the problem of unavailability of the state signals required by the motion synchronization controller, LESO is designed for EHSA and EMA to observe the state variables. Based on the observed states of LESO, motion synchronization controllers could enable EHSA and EMA to simultaneously track the desired motion trajectories. Additionally, nonlinearities, uncertainties and unknown disturbances as well as the coupling term between EHSA and EMA can be estimated and compensated by using the extended state of the proposed LESO. Finally, comparative simulation results indicate that the proposed LESO-based motion synchronization controller could reduce significant force fighting between EHSA and EMA. PMID:29068392

  7. Electrical conductivity and equation of state of liquid nitrogen, oxygen, benzene, and 1-butene shocked to 60 GPa

    International Nuclear Information System (INIS)

    Hamilton, D.C.

    1986-01-01

    Measurements are reported for the electrical conductivity of liquid nitrogen (N 2 ), oxygen (O 2 ) and benzene (C 6 H 6 ), and Hugoniot equation of state of liquid 1-butene (C 4 H 8 ) under shock compressed conditions. The conductivity data span 7 x 10 -4 to 7 x 10 1 Ω -1 cm -1 over a dynamic pressure range 18.1 to 61.5 GPa and are discussed in terms of amorphous semiconduction models which include such transport phenomena as hopping, percolation, pseudogaps, and metallization. Excellent agreement is found between the equation-of-state measurements, which span a dynamic pressure range 12.3 to 53.8 GPa, and Ree's calculated values which assume a 2-phase mixture consisting of molecular hydrogen and carbon in a dense diamond-like phase. There is a 2-1/2 fold increase in the thermal pressure contribution over a less dense, stoichiometrically equivalent liquid. 90 refs., 48 figs., 8 tabs

  8. Absorptive Capacities of Local Enterprises from the Electric-Electronics Sector In the State of Tamaulipas, Mexico

    Directory of Open Access Journals (Sweden)

    Francisco García Fernández

    2012-02-01

    Full Text Available The paper analyzes the absorptive capacities of a group of enterprises from the electric-electronics sector in the state of Tamaulipas Mexico. First, the literature on absorptive capabilities is reviewed, adopting an evolutionist approach. Then, an analysis of the sector is carried out in order to verify the recent changes made in various indicators – value of the total products by the selected states, job generation and productivity rates – based on data from the last three economic censuses. Finally, an analysis of the three selected enterprises’ absorptive capacities is addressed from a case study perspective, making our own interpretation of the construct based on the integration of the different analyzed proposals.

  9. Electrical-field-induced magnetic Skyrmion ground state in a two-dimensional chromium tri-iodide ferromagnetic monolayer

    Science.gov (United States)

    Liu, Jie; Shi, Mengchao; Mo, Pinghui; Lu, Jiwu

    2018-05-01

    Using fully first-principles non-collinear self-consistent field density functional theory (DFT) calculations with relativistic spin-orbital coupling effects, we show that, by applying an out-of-plane electrical field on a free-standing two-dimensional chromium tri-iodide (CrI3) ferromagnetic monolayer, the Néel-type magnetic Skyrmion spin configurations become more energetically-favorable than the ferromagnetic spin configurations. It is revealed that the topologically-protected Skyrmion ground state is caused by the breaking of inversion symmetry, which induces the non-trivial Dzyaloshinskii-Moriya interaction (DMI) and the energetically-favorable spin-canting configuration. Combining the ferromagnetic and the magnetic Skyrmion ground states, it is shown that 4-level data can be stored in a single monolayer-based spintronic device, which is of practical interests to realize the next-generation energy-efficient quaternary logic devices and multilevel memory devices.

  10. Medical licensing board characteristics and physician discipline: an empirical analysis.

    Science.gov (United States)

    Law, Marc T; Hansen, Zeynep K

    2010-02-01

    This article investigates the relationship between the characteristics of medical licensing boards and the frequency with which boards discipline physicians. Specifically, we take advantage of variation in the structure of medical licensing boards between 1993 and 2003 to determine the effect of organizational and budgetary independence, public oversight, and resource constraints on rates of physician discipline. We find that larger licensing boards, boards with more staff, and boards that are organizationally independent from state government discipline doctors more frequently. Public oversight and political control over board budgets do not appear to influence the extent to which medical licensing boards discipline doctors. These findings are broadly consistent with theories of regulatory behavior that emphasize the importance of bureaucratic autonomy for effective regulatory enforcement.

  11. Effect of surface states on electrical characteristic of metal - insulator - semiconductor (MIS) diodes

    International Nuclear Information System (INIS)

    Altindal, S.; Doekme, I.; Tataroglu, A.; Sahingoez, R.

    2002-01-01

    The current-voltage (I-V) characteristics of Metal-Insulator-Semiconductor (MIS) Schottky barrier diodes which is consider distribution of interface states in equilibrium with semiconductor were determined at two (low and high) temperature. The interface states were responsible for non-ideal behavior of the forward I-V characteristic of diodes. Both diodes (n and p type Si) showed non-ideal behavior with an ideality factor 1.6 and 1.85 respectively at room temperature. The higher values of n-type Si were attributed to an order of magnitude higher density of interface states in the both diodes. The effect of an interfacial insulator layer between the metal and semiconductor are also studied. The high density of interface states also caused a reduction in the barrier height of the MIS diode. It is shown that by using Norde function at low and high temperature, barrier height □ b , series resistance R s and ideality factor n can be determined even in the case 1 s obtained from Norde function strongly depend on temperature, and decrease with increasing temperature. In addition, the potential barrier height increases with increasing temperature. The mean density of interface states N ss decreases with increasing temperature. Particularly at low temperature the I-V characteristics are controlled by interface states density

  12. Atomic Energy Control Board

    International Nuclear Information System (INIS)

    Blackman, N.S.; Gummer, W.K.

    1982-02-01

    This paper has been prepared to provide an overview of the responsibilities and activities of the Atomic Energy Control Board. It is designed to address questions that are often asked concerning the establishment of the Atomic Energy Control Board, its enabling legislation, licensing and compliance activities, federal-provincial relationships, international obligations, and communications with the public

  13. SMART Boards Rock

    Science.gov (United States)

    Giles, Rebecca M.; Shaw, Edward L.

    2011-01-01

    SMART Board is a technology that combines the functionality of a whiteboard, computer, and projector into a single system. The interactive nature of the SMART Board offers many practical uses for providing an introduction to or review of material, while the large work area invites collaboration through social interaction and communication. As a…

  14. Electric dipole moment function and line intensities for the ground state of carbon monxide

    International Nuclear Information System (INIS)

    Chen Hua-Jun; Cheng Xin-Lu; Wu Jie; Liu Hao

    2015-01-01

    An accurate electric dipole moment function (EDMF) is obtained for the carbon monoxide (CO) molecule (X 1 Σ + ) by fitting the experimental rovibrational transitional moments. Additionally, an accurate ab initio EDMF is found using the highly accurate, multi-reference averaged coupled-pair functional (ACPF) approach with the basis set, aug-cc-pV6Z, and a finite-field with ±0.005 a.u. (The unit a.u. is the abbreviation of atomic unit). This ab initio EDMF is very consistent with the fitted ones. The vibrational transition matrix moments and the Herman–Wallis factors, calculated with the Rydberg–Klein–Rees (RKR) potential and the fitted and ab initio EDMFs, are compared with experimental measurements. The consistency of these line intensities with the high-resolution transmission (HITRAN) molecular database demonstrates the improved accuracy of the fitted and ab initio EDMFs derived in this work. (paper)

  15. Electric circuit modeling of lithium-sulfur batteries during discharging state

    DEFF Research Database (Denmark)

    Stroe, Daniel-Ioan; Knap, Vaclav; Swierczynski, Maciej Jozef

    2017-01-01

    Lithium-ion batteries are characterized by having very good performance in terms of efficiency, lifetime, and selfdischarge, which allowed them to become the major player in the electric vehicle applications. However, they were not able to totally overcome the EV range anxiety. Thus, research...... is carried out nowadays to develop batteries with even higher gravimetric energy density, which should allow a substantial range increase. One of the technologies, which should be able to meet the range requirements is the Lithium-Sulfur (Li-S) battery. Thanks to the extensive research and development...... static and pulse discharge profiles, showing a good accuracy in predicting the voltage of the tested Li-S battery cell....

  16. NATO Advanced Study Institute International Advanced Course on The Liquid State and Its Electrical Properties

    CERN Document Server

    Christophorou, L; Luessen, L

    1988-01-01

    As the various disciplines of science advance, they proliferate and tend to become more esoteric. Barriers of specialized terminologies form, which cause scientists to lose contact with their colleagues, and differences in points-of-view emerge which hinder the unification of knowledge among the various disciplines, and even within a given discipline. As a result, the scientist, and especially the student, is in many instances offered fragmented glimpses of subjects that are funda­ mentally synthetic and that should be treated in their own right. Such seems to be the case of the liquid state. Unlike the other states of matter -- gases, solids, and plasmas -- the liquid state has not yet received unified treatment, probably because it has been the least explored and remains the least understood state of matter. Occasionally, events occur which help remove some of the barriers that separate scientists and disciplines alike. Such an event was the ASI on The Liquid State held this past July at the lovely Hotel T...

  17. 77 FR 2541 - Board Meeting

    Science.gov (United States)

    2012-01-18

    ... FARM CREDIT SYSTEM INSURANCE CORPORATION Board Meeting AGENCY: Farm Credit System Insurance Corporation Board; Regular Meeting. SUMMARY: Notice is hereby given of the regular meeting of the Farm Credit System Insurance Corporation Board (Board). DATE AND TIME: The meeting of the Board will be held at the...

  18. Realization of Multi-Stable Ground States in a Nematic Liquid Crystal by Surface and Electric Field Modification

    Science.gov (United States)

    Gwag, Jin Seog; Kim, Young-Ki; Lee, Chang Hoon; Kim, Jae-Hoon

    2015-06-01

    Owing to the significant price drop of liquid crystal displays (LCDs) and the efforts to save natural resources, LCDs are even replacing paper to display static images such as price tags and advertising boards. Because of a growing market demand on such devices, the LCD that can be of numerous surface alignments of directors as its ground state, the so-called multi-stable LCD, comes into the limelight due to the great potential for low power consumption. However, the multi-stable LCD with industrial feasibility has not yet been successfully performed. In this paper, we propose a simple and novel configuration for the multi-stable LCD. We demonstrate experimentally and theoretically that a battery of stable surface alignments can be achieved by the field-induced surface dragging effect on an aligning layer with a weak surface anchoring. The simplicity and stability of the proposed system suggest that it is suitable for the multi-stable LCDs to display static images with low power consumption and thus opens applications in various fields.

  19. Digital circuit boards mach 1 GHz

    CERN Document Server

    Morrison, Ralph

    2012-01-01

    A unique, practical approach to the design of high-speed digital circuit boards The demand for ever-faster digital circuit designs is beginning to render the circuit theory used by engineers ineffective. Digital Circuit Boards presents an alternative to the circuit theory approach, emphasizing energy flow rather than just signal interconnection to explain logic circuit behavior. The book shows how treating design in terms of transmission lines will ensure that the logic will function, addressing both storage and movement of electrical energy on these lines. It cove

  20. Electric quadrupole excitation of the first excited state of 11B

    International Nuclear Information System (INIS)

    Fewell, M.P.; Spear, R.H.; Zabel, T.H.; Baxter, A.M.

    1980-02-01

    The Coulomb excitation of backscattered 11 B projectiles has been used to measure the reduced E2 transition probability B(E2; 3/2 - →1/2 - ) between the 3/2 - ground state and the 1/2 - first excited state of 11 B. It is found that B(E2; 3/2 - →1/2 - ) = 2.1 +- 0.4 e 2 fm 4 , which agrees with shell-model predictions but is a factor of 10 larger than the prediction of the core-excitation model