The economic implications of later school start times in the United States.

Science.gov (United States)

Hafner, Marco; Stepanek, Martin; Troxel, Wendy M

2017-12-01

Numerous studies have shown that later school start times (SST) are associated with positive student outcomes, including improvements in academic performance, mental and physical health, and public safety. While the benefits of later SST are very well documented in the literature, in practice there is opposition against delaying SST. A major argument against later SST is the claim that delaying SST will result in significant additional costs for schools due to changes in bussing strategies. However, to date, there has only been one published study that has quantified the potential economic benefits of later SST in relation to potential costs. The current study investigates the economic implications of later school start times by examining a policy experiment and its subsequent state-wide economic effects of a state-wide universal shift in school start times to 8.30AM. Using a novel macroeconomic modeling approach, the study estimates changes in the economic performance of 47 US states following a delayed school start time, which includes the benefits of higher academic performance of students and reduced car crash rates. The benefit-cost projections of this study suggest that delaying school start times is a cost-effective, population-level strategy, which could have a significant impact on public health and the US economy. From a policy perspective, these findings are crucial as they demonstrate that significant economic gains resulting from the delay in SST accrue over a relatively short period of time following the adoption of the policy shift. Copyright © 2017 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

A position-sensitive start detector for time-of-flight measurement

International Nuclear Information System (INIS)

Ikezoe, Hiroshi; Shikazono, Naomoto; Isoyama, Goro.

1978-08-01

A position-sensitive start detector for a time-of-flight measurement is described. In this detector microchannel plates were used to obtain time and position signals simultaneously. A time resolution of 121 psec FWHM and a position resolution of 0.28 mm FWHM were obtained for α-particles from an 241 Am source. (auth.)

School start times and teenage driver motor vehicle crashes.

Science.gov (United States)

2015-12-01

There is substantial evidence that lack of sleep is a significant factor in motor vehicle crashes experienced by teenage drivers. This report examines the hypothesis that a later high school start time may reduce crash rates by reducing the interfere...

Later school start time is associated with improved sleep and daytime functioning in adolescents.

Science.gov (United States)

Boergers, Julie; Gable, Christopher J; Owens, Judith A

2014-01-01

Chronic insufficient sleep is a growing concern among adolescents and is associated with a host of adverse health consequences. Early school start times may be an environmental contributor to this problem. The purpose of this study was to examine the impact of a delay in school start time on sleep patterns, sleepiness, mood, and health-related outcomes. Boarding students (n = 197, mean age = 15.6 yr) attending an independent high school completed the School Sleep Habits Survey before and after the school start time was experimentally delayed from 8:00 a.m. to 8:25 a.m. The delay in school start time was associated with a significant (29 min) increase in sleep duration on school nights. The percentage of students receiving 8 or more hours of sleep on a school night increased to more than double, from 18% to 44%. Students in 9th and 10th grade and those with lower baseline sleep amounts were more likely to report improvements in sleep duration after the schedule change. Daytime sleepiness, depressed mood, and caffeine use were all significantly reduced after the delay in school start time. Sleep duration reverted to baseline levels when the original (earlier) school start time was reinstituted. A modest (25 min) delay in school start time was associated with significant improvements in sleep duration, daytime sleepiness, mood, and caffeine use. These findings have important implications for public policy and add to research suggesting the health benefits of modifying school schedules to more closely align with adolescents' circadian rhythms and sleep needs.

School start times and teen driver crashes : traffic tech.

Science.gov (United States)

2015-12-01

Sleep health has become an increasingly important and studied : topic in the last decade. So much so that a number of : school districts across the United States have explored changing, : or have already changed their high-school start times to : a l...

School Start Times, Sleep, Behavioral, Health, and Academic Outcomes: a Review of the Literature

Science.gov (United States)

Chapman, Daniel P.; Croft, Janet B.

2015-01-01

BACKGROUND Insufficient sleep in adolescents has been shown to be associated with a wide variety of adverse outcomes, from poor mental and physical health to behavioral problems and lower academic grades. However, most high school students do not get sufficient sleep. Delaying school start times for adolescents has been proposed as a policy change to address insufficient sleep in this population and potentially to improve students’ academic performance, reduce engagement in risk behaviors, and improve health. METHODS This paper reviews 38 reports examining the association between school start times, sleep, and other outcomes among adolescent students. RESULTS Most studies reviewed provide evidence that delaying school start time increases weeknight sleep duration among adolescents, primarily by delaying rise times. Most of the studies saw a significant increase in sleep duration even with relatively small delays in start times of half an hour or so. Later start times also generally correspond to improved attendance, less tardiness, less falling asleep in class, better grades, and fewer motor vehicle crashes. CONCLUSIONS Although additional research is necessary, research results that are already available should be disseminated to stakeholders to enable the development of evidence-based school policies. PMID:27040474

Standardization of the time for the execution of HANARO start-up and shutdown procedures

International Nuclear Information System (INIS)

Choi, H. Y.; Lim, I. C.; Hwang, S. R.; Kang, T. J.; Youn, D. B.

2003-01-01

For the standardization of the time to execute HANARO start-up and shutdown procedures, code names were assigned to the individual procedures and the work time were investigated. The data recorded by the operators during start-up and shutdown were statistically analyzed. The analysis results will be used for the standardization of start-up and shutdown procedures and it will be reflected in the procedure document

High school start times after 8:30 am are associated with later wake times and longer time in bed among teens in a national urban cohort study.

Science.gov (United States)

Nahmod, Nicole G; Lee, Soomi; Buxton, Orfeu M; Chang, Anne-Marie; Hale, Lauren

2017-12-01

High school start times are a key contributor to insufficient sleep. This study investigated associations of high school start times with bedtime, wake time, and time in bed among urban teenagers. Daily-diary study nested within the prospective Fragile Families and Child Wellbeing Study. Twenty US cities. Four hundred thirteen teenagers who completed ≥1 daily diary report on a school day. Participating teens were asked to complete daily diaries for 7 consecutive days. School-day daily diaries (3.8±1.6 entries per person) were used in analyses (N=1555 school days). High school start time, the main predictor, was categorized as 7:00-7:29 am (15%), 7:30-7:59 am (22%), 8:00-8:29 am (35%), and 8:30 am or later (28%). Multilevel modeling examined the associations of school start times with bedtime, wake time, and time in bed. Models adjusted for age, sex, race/ethnicity, household income, caregiver's education, and school type. Teens with the earliest high school start times (7:00-7:29 am) obtained 46 minutes less time in bed on average compared with teens with high school start times at 8:30 am or later (Pstart times and shorter time in bed, primarily due to earlier wake times (PStart times after 8:30 am were associated with increased time in bed, extending morning sleep by 27-57 minutes (Pstart times. Later school start times are associated with later wake times in our large, diverse sample. Teens starting school at 8:30 am or later are the only group with an average time in bed permitting 8 hours of sleep, the minimum recommended by expert consensus for health and well-being. Copyright © 2017 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

Risk Reduction Effects Due to the Start Time Extension of EDGs in OPR-1000

International Nuclear Information System (INIS)

Lim, Ho-Gon; Yang, Joon-Eon; Hwang, Mee-Jeong

2006-01-01

Under the condition that the ECCS rule in Korea will be revised based on the new U.S. 10 CFR 50.46, the risk impact due to the EDG start time extension is analyzed in the present study. This paper is composed of 6 sections. In the section 2, the LOCA break size that cannot be mitigable under the condition of extended EDG start time is obtained from the thermal hydraulic analysis. The section 3 discusses the frequency of the immitigable LOCA and the probability of the LOOP given a LOCA. In the section 4, the effect of the EDG start time extension on its failure probability is discussed with a qualitative manner. Finally, the whole risk change due to the EDG start time extension is calculated in the section 5 with the conclusions given in the section 6

School Start Times, Sleep, Behavioral, Health, and Academic Outcomes: A Review of the Literature.

Science.gov (United States)

Wheaton, Anne G; Chapman, Daniel P; Croft, Janet B

2016-05-01

Insufficient sleep in adolescents has been shown to be associated with a wide variety of adverse outcomes, from poor mental and physical health to behavioral problems and lower academic grades. However, most high school students do not get sufficient sleep. Delaying school start times for adolescents has been proposed as a policy change to address insufficient sleep in this population and potentially to improve students' academic performance, reduce engagement in risk behaviors, and improve health. This article reviews 38 reports examining the association between school start times, sleep, and other outcomes among adolescent students. Most studies reviewed provide evidence that delaying school start time increases weeknight sleep duration among adolescents, primarily by delaying rise times. Most of the studies saw a significant increase in sleep duration even with relatively small delays in start times of half an hour or so. Later start times also generally correspond to improved attendance, less tardiness, less falling asleep in class, better grades, and fewer motor vehicle crashes. Although additional research is necessary, research results that are already available should be disseminated to stakeholders to enable the development of evidence-based school policies. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.

Middle school start times: the importance of a good night's sleep for young adolescents.

Science.gov (United States)

Wolfson, Amy R; Spaulding, Noah L; Dandrow, Craig; Baroni, Elizabeth M

2007-01-01

With the onset of adolescence, teenagers require 9.2 hr of sleep and experience a delay in the timing of sleep. In the "real world" with early school start times, however, they report less sleep, striking differences between their school-weekend sleep schedules, and significant daytime sleepiness. Prior studies demonstrated that high schoolers with later school starts do not further delay bedtime but obtain more sleep due to later wake times. This study examined sleep-wake patterns of young adolescents attending urban, public middle schools with early (7:15 a.m.) versus late (8:37 a.m.) start times. Students (N = 205) were assessed at 2 time periods. Students at the late-starting school reported waking up over 1 hr later on school mornings and obtaining 50 min more sleep each night, less sleepiness, and fewer tardies than students at the early school. All students reported similar school-night bedtime, sleep hygiene practices, and weekend sleep schedules.

A quasi-experimental study of the impact of school start time changes on adolescent sleep.

Science.gov (United States)

Owens, Judith A; Dearth-Wesley, Tracy; Herman, Allison N; Oakes, J Michael; Whitaker, Robert C

2017-12-01

To determine whether simultaneous school start time changes (delay for some schools; advance for others) impact adolescents' sleep. Quasi-experimental study using cross-sectional surveys before and after changes to school start times in September 2015. Eight middle (grades 7-8), 3 secondary (grades 7-12), and 8 high (grades 9-12) schools in Fairfax County (Virginia) public schools. A total of 2017 (6% of ~34,900) students were surveyed before start time changes, and 1180 (3% of ~35,300) were surveyed after. A 50-minute delay (7:20 to 8:10 am) in start time for high schools and secondary schools and a 30-minute advance (8:00 to 7:30 am) for middle schools. Differences before and after start time changes in self-reported sleep duration and daytime sleepiness. Among respondents, 57.5% were non-Hispanic white, and 10.3% received free or reduced-priced school meals. Before start time changes, high/secondary and middle school students slept a mean (SD) of 7.4 (1.2) and 8.4 (1.0) hours on school nights, respectively, and had a prevalence of daytime sleepiness of 78.4% and 57.2%, respectively. Adjusted for potential confounders, students with a 50-minute delay slept 30.1 minutes longer (95% confidence interval [CI], 24.3-36.0) on school nights and had less daytime sleepiness (-4.8%; 95% CI, -8.5% to -1.1%), whereas students with a 30-minute advance slept 14.8 minutes less (95% CI, -21.6 to -8.0) and had more daytime sleepiness (8.0%; 95% CI, 2.5%-13.5%). Both advances and delays in school start times are associated with changes in adolescents' school-night sleep duration and daytime sleepiness. Larger changes might occur with later start times. Copyright © 2017 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

Delayed High School Starting Times. Information Capsule. Volume 0908

Science.gov (United States)

Blazer, Christie

2009-01-01

Educators around the nation are considering pushing high school starting times back until later in the morning, based on evidence suggesting that amount of sleep and circadian rhythms play a part in adolescents' academic performance. While research confirms that adolescents do not get enough sleep and that insufficient sleep can negatively…

Longitudinal Outcomes of Start Time Delay on Sleep, Behavior, and Achievement in High School

Science.gov (United States)

Thacher, Pamela V.; Onyper, Serge V.

2016-01-01

Study Objectives: To establish whether sleep, health, mood, behavior, and academics improved after a 45-minute delay in high school start time, and whether changes persisted longitudinally. Methods: We collected data from school records and student self-report across a number of domains at baseline (May 2012) and at two follow-up time points (November 2012 and May 2013), at a public high school in upstate New York. Students enrolled during academic years (AY) 2011–2012 and 2012–2013 completed the Pittsburgh Sleep Quality Index; the DASS-21; the “Owl-Lark” Scale; the Daytime Sleepiness Index; and a brief self-report of health. Reports from school records regarding attendance, tardiness, disciplinary violations, and academic performance were collected for AY 2010–2011 through 2013–2014. Results: Students delayed but did not extend their sleep period; we found lasting improvements in tardiness and disciplinary violations after the start-time delay, but no changes to other variables. At the first follow-up, students reported 20 minutes longer sleep, driven by later rise times and stable bed times. At the second follow-up, students maintained later rise times but delayed bedtimes, returning total sleep to baseline levels. A delay in rise time, paralleling the delay in the start time that occurred, resulted in less tardiness and decreased disciplinary incidents, but larger improvements to sleep patterns may be necessary to affect health, attendance, sleepiness, and academic performance. Conclusions: Later start times improved tardiness and disciplinary issues at this school district. A delay in start time may be a necessary but not sufficient means to increase sleep time and may depend on preexisting individual differences. Commentary: A commentary on this article appears in this issue on page 267. Citation: Thacher PV, Onyper SV. Longitudinal outcomes of start time delay on sleep, behavior, and achievement in high school. SLEEP 2016;39(2):271–281. PMID

Class start times, sleep, and academic performance in college: a path analysis.

Science.gov (United States)

Onyper, Serge V; Thacher, Pamela V; Gilbert, Jack W; Gradess, Samuel G

2012-04-01

Path analysis was used to examine the relationship between class start times, sleep, circadian preference, and academic performance in college-aged adults. Consistent with observations in middle and high school students, college students with later class start times slept longer, experienced less daytime sleepiness, and were less likely to miss class. Chronotype was an important moderator of sleep schedules and daytime functioning; those with morning preference went to bed and woke up earlier and functioned better throughout the day. The benefits of taking later classes did not extend to academic performance, however; grades were somewhat lower in students with predominantly late class schedules. Furthermore, students taking later classes were at greater risk for increased alcohol consumption, and among all the factors affecting academic performance, alcohol misuse exerted the strongest effect. Thus, these results indicate that later class start times in college, while allowing for more sleep, also increase the likelihood of alcohol misuse, ultimately impeding academic success.

Delayed school start times and adolescent sleep: A systematic review of the experimental evidence.

Science.gov (United States)

Minges, Karl E; Redeker, Nancy S

2016-08-01

Many schools have instituted later morning start times to improve sleep, academic, and other outcomes in response to the mismatch between youth circadian rhythms and early morning start times. However, there has been no systematic synthesis of the evidence on the effects of this practice. To examine the impact of delayed school start time on students' sleep, health, and academic outcomes, electronic databases were systematically searched and data were extracted using the preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines. Six studies satisfied selection criteria and used pre-post, no control (n = 3), randomized controlled trial (n = 2), and quasi-experimental (n = 1) designs. School start times were delayed 25-60 min, and correspondingly, total sleep time increased from 25 to 77 min per weeknight. Some studies revealed reduced daytime sleepiness, depression, caffeine use, tardiness to class, and trouble staying awake. Overall, the evidence supports recent non-experimental study findings and calls for policy that advocates for delayed school start time to improve sleep. This presents a potential long-term solution to chronic sleep restriction during adolescence. However, there is a need for rigorous randomized study designs and reporting of consistent outcomes, including objective sleep measures and consistent measures of health and academic performance. Copyright © 2015 Elsevier Ltd. All rights reserved.

Earlier school start times are associated with higher rates of behavioral problems in elementary schools.

Science.gov (United States)

Keller, Peggy S; Gilbert, Lauren R; Haak, Eric A; Bi, Shuang; Smith, Olivia A

2017-04-01

Early school start times may curtail children's sleep and inadvertently promote sleep restriction. The current study examines the potential implications for early school start times for behavioral problems in public elementary schools (student ages 5-12 years) in Kentucky. School start times were obtained from school Web sites or by calling school offices; behavioral and disciplinary problems, along with demographic information about schools, were obtained from the Kentucky Department of Education. Estimated associations controlled for teacher/student ratio, racial composition, school rank, enrollment, and Appalachian location. Associations between early school start time and greater behavioral problems (harassment, in-school removals, suspensions, and expulsions) were observed, although some of these associations were found only for schools serving the non-Appalachian region. Findings support the growing body of research showing that early school start times may contribute to student problems, and extend this research through a large-scale examination of elementary schools, behavioral outcomes, and potential moderators of risk. Copyright © 2017 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

Longitudinal Outcomes of Start Time Delay on Sleep, Behavior, and Achievement in High School.

Science.gov (United States)

Thacher, Pamela V; Onyper, Serge V

2016-02-01

To establish whether sleep, health, mood, behavior, and academics improved after a 45-minute delay in high school start time, and whether changes persisted longitudinally. We collected data from school records and student self-report across a number of domains at baseline (May 2012) and at two follow-up time points (November 2012 and May 2013), at a public high school in upstate New York. Students enrolled during academic years (AY) 2011-2012 and 2012-2013 completed the Pittsburgh Sleep Quality Index; the DASS-21; the "Owl-Lark" Scale; the Daytime Sleepiness Index; and a brief self-report of health. Reports from school records regarding attendance, tardiness, disciplinary violations, and academic performance were collected for AY 2010-2011 through 2013-2014. Students delayed but did not extend their sleep period; we found lasting improvements in tardiness and disciplinary violations after the start-time delay, but no changes to other variables. At the first follow-up, students reported 20 minutes longer sleep, driven by later rise times and stable bed times. At the second follow-up, students maintained later rise times but delayed bedtimes, returning total sleep to baseline levels. A delay in rise time, paralleling the delay in the start time that occurred, resulted in less tardiness and decreased disciplinary incidents, but larger improvements to sleep patterns may be necessary to affect health, attendance, sleepiness, and academic performance. Later start times improved tardiness and disciplinary issues at this school district. A delay in start time may be a necessary but not sufficient means to increase sleep time and may depend on preexisting individual differences. A commentary on this article appears in this issue on page 267. © 2016 Associated Professional Sleep Societies, LLC.

Timing of start of dialysis in diabetes mellitus patients: a systematic literature review.

Science.gov (United States)

Nacak, Hakan; Bolignano, Davide; Van Diepen, Merel; Dekker, Friedo; Van Biesen, Wim

2016-02-01

Diabetes mellitus is a frequent cause of the need for renal replacement therapy (RRT). Historically, RRT was started earlier in patients with diabetes, in an attempt to prevent complications of uraemia and diabetes. We did a systematic review to find support for this earlier start of dialysis in patients with versus without diabetes. The MEDLINE, EMBASE and CENTRAL databases were searched for articles about the timing of dialysis initiation in (subgroups of) patients with diabetes and CKD Stage 5. A total of 340 papers were screened and 11 papers were selected to be reviewed. Only three studies showed data of at least one subgroup of patients with diabetes. Two observational studies concluded that start of dialysis with a higher estimated glomerular filtration rate (eGFR) is beneficial with regard to survival, one did not find a difference and six observational studies concluded that start of dialysis with a lower eGFR is associated with better survival in patients with diabetes. The effect of timing of initiation of dialysis did not differ between patients with versus without diabetes. Lastly, one randomized controlled trial (two papers) reported that there was no difference in survival between start at higher versus lower eGFR overall and a P-value for the interaction with diabetes of P = 0.63, indicating no difference between patients with versus without diabetes with regard to the timing of start of dialysis and subsequent mortality on dialysis. There is no difference between early (eGFR) and late (lower eGFR) start of RRT with regard to mortality in patients with versus without diabetes. RRT should thus be initiated based on the same criteria in all patients, irrespective of the presence or absence of diabetes. © The Author 2016. Published by Oxford University Press on behalf of ERA-EDTA. All rights reserved.

Improving on-time surgical starts: the impact of implementing pre-OR timeouts and performance pay.

Science.gov (United States)

Martin, Luke; Langell, John

2017-11-01

Operating room (OR) time is expensive. Underutilized OR time negatively impacts efficiency and is an unnecessary cost for hospitals. The purpose of this study was to evaluate the impact of a pre-OR timeout and performance pay incentive on the frequency of on-time, first surgical starts. At a single Veterans Affairs Medical Center, we implemented a pre-OR timeout in the form of a safety-briefing checklist and a modest performance pay incentive for on-time starts (>90% compliance) for attending surgeons. Data were collected on all first-start cases beginning before implementation in 2008 and continued through 2015. Each year, an average of 960 first starts occurred across nine surgical divisions. Before implementation of either the timeout or pay incentive, only 15% of cases started on time, and by 2015, greater than 72% were on time (P 60 min were not significant (P = 0.31; P = 0.81). Assuming a loss of 7 min per case for delays pay for on-time starts significantly improves OR utilization and reduces unnecessary costs. Published by Elsevier Inc.

Later school start times for supporting the education, health, and well-being of high school students.

Science.gov (United States)

Marx, Robert; Tanner-Smith, Emily E; Davison, Colleen M; Ufholz, Lee-Anne; Freeman, John; Shankar, Ravi; Newton, Lisa; Brown, Robert S; Parpia, Alyssa S; Cozma, Ioana; Hendrikx, Shawn

2017-07-03

A number of school systems worldwide have proposed and implemented later school start times as a means of avoiding the potentially negative impacts that early morning schedules can have on adolescent students. Even mild sleep deprivation has been associated with significant health and educational concerns: increased risk for accidents and injuries, impaired learning, aggression, memory loss, poor self-esteem, and changes in metabolism. Although researchers have begun to explore the effects of delayed school start time, no one has conducted a rigorous review of evidence to determine whether later school start times support adolescent health, education, and well-being. We aimed to assess the effects of a later school start time for supporting health, education, and well-being in high school students.Secondary objectives were to explore possible differential effects of later school start times in student subgroups and in different types of schools; to identify implementation practices, contextual factors, and delivery modes associated with positive and negative effects of later start times; and to assess the effects of later school start times on the broader community (high school faculty and staff, neighborhood, and families). We conducted the main search for this review on 28 October 2014 and updated it on 8 February 2016. We searched CENTRAL as well as 17 key electronic databases (including MEDLINE, Embase, ERIC, PsycINFO, and Sociological Abstracts), current editions of relevant journals and organizational websites, trial registries, and Google Scholar. We included any randomized controlled trials, controlled before-and-after studies, and interrupted time series studies with sufficient data points that pertained to students aged 13 to 19 years and that compared different school start times. Studies that reported either primary outcomes of interest (academic outcomes, amount or quality of sleep, mental health indicators, attendance, or alertness) or secondary

The Association between Elementary School Start Time and Students' Academic Achievement in Wayzata Public Schools

Science.gov (United States)

Dupuis, Danielle N.

2015-01-01

The Center for Applied Research and Educational Improvement (CAREI) conducted two analyses with the purpose of examining the association between elementary school start time and students' academic achievement in mathematics and reading in Wayzata Public Schools. The first analysis examined the association between elementary school start time and…

Lean principles optimize on-time vascular surgery operating room starts and decrease resident work hours.

Science.gov (United States)

Warner, Courtney J; Walsh, Daniel B; Horvath, Alexander J; Walsh, Teri R; Herrick, Daniel P; Prentiss, Steven J; Powell, Richard J

2013-11-01

Lean process improvement techniques are used in industry to improve efficiency and quality while controlling costs. These techniques are less commonly applied in health care. This study assessed the effectiveness of Lean principles on first case on-time operating room starts and quantified effects on resident work hours. Standard process improvement techniques (DMAIC methodology: define, measure, analyze, improve, control) were used to identify causes of delayed vascular surgery first case starts. Value stream maps and process flow diagrams were created. Process data were analyzed with Pareto and control charts. High-yield changes were identified and simulated in computer and live settings prior to implementation. The primary outcome measure was the proportion of on-time first case starts; secondary outcomes included hospital costs, resident rounding time, and work hours. Data were compared with existing benchmarks. Prior to implementation, 39% of first cases started on time. Process mapping identified late resident arrival in preoperative holding as a cause of delayed first case starts. Resident rounding process inefficiencies were identified and changed through the use of checklists, standardization, and elimination of nonvalue-added activity. Following implementation of process improvements, first case on-time starts improved to 71% at 6 weeks (P = .002). Improvement was sustained with an 86% on-time rate at 1 year (P < .001). Resident rounding time was reduced by 33% (from 70 to 47 minutes). At 9 weeks following implementation, these changes generated an opportunity cost potential of $12,582. Use of Lean principles allowed rapid identification and implementation of perioperative process changes that improved efficiency and resulted in significant cost savings. This improvement was sustained at 1 year. Downstream effects included improved resident efficiency with decreased work hours. Copyright © 2013 Society for Vascular Surgery. Published by Mosby, Inc. All

School Start Times for Middle School and High School Students - United States, 2011-12 School Year.

Science.gov (United States)

Wheaton, Anne G; Ferro, Gabrielle A; Croft, Janet B

2015-08-07

Adolescents who do not get enough sleep are more likely to be overweight; not engage in daily physical activity; suffer from depressive symptoms; engage in unhealthy risk behaviors such as drinking, smoking tobacco, and using illicit drugs; and perform poorly in school. However, insufficient sleep is common among high school students, with less than one third of U.S. high school students sleeping at least 8 hours on school nights. In a policy statement published in 2014, the American Academy of Pediatrics (AAP) urged middle and high schools to modify start times as a means to enable students to get adequate sleep and improve their health, safety, academic performance, and quality of life. AAP recommended that "middle and high schools should aim for a starting time of no earlier than 8:30 a.m.". To assess state-specific distributions of public middle and high school start times and establish a pre-recommendation baseline, CDC and the U.S. Department of Education analyzed data from the 2011-12 Schools and Staffing Survey (SASS). Among an estimated 39,700 public middle, high, and combined schools* in the United States, the average start time was 8:03 a.m. Overall, only 17.7% of these public schools started school at 8:30 a.m. or later. The percentage of schools with 8:30 a.m. or later start times varied greatly by state, ranging from 0% in Hawaii, Mississippi, and Wyoming to more than three quarters of schools in Alaska (76.8%) and North Dakota (78.5%). A school system start time policy of 8:30 a.m. or later provides teenage students the opportunity to achieve the 8.5-9.5 hours of sleep recommended by AAP and the 8-10 hours recommended by the National Sleep Foundation.

Is 8:30 a.m. Still Too Early to Start School? A 10:00 a.m. School Start Time Improves Health and Performance of Students Aged 13–16

Directory of Open Access Journals (Sweden)

Paul Kelley

2017-12-01

Full Text Available While many studies have shown the benefits of later school starts, including better student attendance, higher test scores, and improved sleep duration, few have used starting times later than 9:00 a.m. Here we report on the implementation and impact of a 10 a.m. school start time for 13 to 16-year-old students. A 4-year observational study using a before-after-before (A-B-A design was carried out in an English state-funded high school. School start times were changed from 8:50 a.m. in study year 0, to 10 a.m. in years 1–2, and then back to 8:50 a.m. in year 3. Measures of student health (absence due to illness and academic performance (national examination results were used for all students. Implementing a 10 a.m. start saw a decrease in student illness after 2 years of over 50% (p < 0.0005 and effect size: Cohen's d = 1.07, and reverting to an 8:50 a.m. start reversed this improvement, leading to an increase of 30% in student illness (p < 0.0005 and Cohen's d = 0.47. The 10:00 a.m. start was associated with a 12% increase in the value-added number of students making good academic progress (in standard national examinations that was significant (<0.0005 and equivalent to 20% of the national benchmark. These results show that changing to a 10:00 a.m. high school start time can greatly reduce illness and improve academic performance. Implementing school start times later than 8:30 a.m., which may address the circadian delay in adolescents' sleep rhythms more effectively for evening chronotypes, appears to have few costs and substantial benefits.

Bottleneck congestion and distribution of work start times: The economics of staggered work hours revisited

OpenAIRE

Takayama, Yuki

2014-01-01

Since the seminal work of Henderson (1981), a number of studies examined the effect of staggered work hours by analyzing models of work start time choice that consider the trade-off between negative congestion externalities and positive production externalities. However, these studies described traffic congestion using flow congestion models. This study develops a model of work start time choice with bottleneck congestion and discloses the intrinsic properties of the model. To this end, this ...

Estimation of Saturation Flow Rate and Start-Up Lost Time for Signal Timing Based on Headway Distribution

Directory of Open Access Journals (Sweden)

Yi Zhao

2015-01-01

Full Text Available This study aimed to calibrate saturation flow rate (SFR and start-up lost time (SLT when developing signal timing. In current commonly used methods, SFR for one given lane is usually calibrated from many subjective adjustment factors and a fixed result. SLT is calculated based on the fixed SFR, which prevents local applications in China. Considering the importance of traffic behavior (headway in determining SFR and SLT, this study started from headway distribution and attempted to specify the relationships between headway and vehicle position directly. A common intersection in Nanjing, China, was selected to implement field study and data from 920 queues was collected. Headway distribution was explored and the 78th percentile of headway at each position was selected to build model. Based on the developed relationships, SFR and SLT were calibrated. The results showed that SFR and SLT were correlated with queue length. Moreover, the results showed that it was difficult to reach saturated state even with a long queue length. This paper provides a new perspective on calibrating important parameters in signal timing, which will be useful for traffic agencies to complete signal timing by making the process simpler.

Exploratory analysis of time from HIV diagnosis to ART start, factors ...

African Journals Online (AJOL)

Background: the HIV care in Ethiopia has reached 79% coverage. The timeliness of the care provided at the different levels in the course of the disease starting from knowing HIV positive status to ART initiation is not well known. This study intends to explore the timing of the care seeking, the care provision and associated ...

School start time influences melatonin and cortisol levels in children and adolescents - a community-based study.

Science.gov (United States)

Carissimi, Alicia; Martins, Alessandra Castro; Dresch, Fabiane; da Silva, Lilian Corrêa; Zeni, Cristian Patrick; Hidalgo, Maria Paz

2016-01-01

School start time influences sleep parameters. Differences between circadian sleep parameters on weekends and weekdays have been associated with obesity, sleep, and psychiatric disorders. Moreover, circadian rhythm dysregulation affects the secretion of some hormones, such as melatonin and cortisol. In the current study, we investigate the effect of school start time on cortisol and melatonin levels in a community sample of Brazilian children and adolescents. This was a cross-sectional study of 454 students (mean age, 12.81 ± 2.56 years; 58.6% female). From this sample, 80 participants were randomly selected for saliva collection to measure melatonin and cortisol levels. Circadian sleep parameters were assessed by self-reported sleep and wake up schedules and the Morningness-Eveningness Questionnaire. The outcomes, salivary melatonin and cortisol levels, were measured in morning, afternoon and night saliva samples, and behavior problems were assessed using the Child Behavior Checklist (CBCL). The main results revealed that morning school start time decreased the secretion of melatonin. Morning melatonin levels were significantly positively correlated with the sleep midpoint on weekdays and on weekends. Afternoon melatonin levels were positively correlated with the sleep midpoint on weekends in the morning school students. Conversely, in the afternoon school students, night melatonin levels were negatively correlated with the sleep midpoint on weekdays. Cortisol secretion did not correlate with circadian sleep parameters in any of the school time groups. In conclusion, school start time influences melatonin secretion, which correlated with circadian sleep parameters. This correlation depends on the presence of psychiatric symptoms. Our findings emphasize the importance of drawing attention to the influence of school start time on the circadian rhythm of children and adolescents.

School start time effects on adolescent learning and academic performance, emotional health and behaviour.

Science.gov (United States)

Wahlstrom, Kyla L; Owens, Judith A

2017-11-01

The investigation of the relationship between the time of day that school begins and the effects it could have on students began in the mid-1990s. Since that time, many articles have been written either for the medical literature or the educational literature. This review is intended to bridge that gap by examining together the findings for both academic and health outcomes, exploring what we know and what is needed in further investigation. Teens who are sleep deficient (defined as obtaining less than 8 h per night) because of early starting time for their school are much more likely to engage in risky behaviours, such as drug, cigarette and alcohol use, have significant feelings of depression, get lower grades and are at greater risk for car crashes. Many studies of academic performance and later school start time indicate benefits, although further research is needed to understand the related mechanisms that contribute to improvements in achievement. Recent research in adolescent sleep and outcomes is being shaped by not only measuring sleep duration, but also examining the timing in which sleep occurs. Early school starting time for middle and high students has a clear, deleterious effect on their health and well being. Most recently, sleep deficit in teens is being viewed as a public health issue that needs a wider discussion about its impact and it necessitates improved public education about the sleep phase shift that occurs during adolescence.

Key parameters of the swimming start and their relationship to start performance.

Science.gov (United States)

Tor, Elaine; Pease, David L; Ball, Kevin A

2015-01-01

The swimming start is typically broken into three sub-phases; on-block, flight, and underwater phases. While overall start performance is highly important to elite swimming, the contribution of each phase and important technical components within each phase, particularly with the new kick-start technique, has not been established. The aim of this study was to identify technical factors associated with overall start performance, with a particular focus on the underwater phase. A number of parameters were calculated from 52 starts performed by elite freestyle and butterfly swimmers. These parameters were split into above-water and underwater groupings, before factor analysis was used to reduce parameter numbers for multiple regression. For the above-water phases, 81% of variance in start performance was accounted for by take-off horizontal velocity. For the underwater water phase, 96% of variance was accounted for with time underwater in descent, time underwater in ascent and time to 10 m. Therefore, developing greater take-off horizontal velocity and focussing on the underwater phase by finding the ideal trajectory will lead to improved start performance.

Law-based arguments and messages to advocate for later school start time policies in the United States.

Science.gov (United States)

Lee, Clark J; Nolan, Dennis M; Lockley, Steven W; Pattison, Brent

2017-12-01

The increasing scientific evidence that early school start times are harmful to the health and safety of teenagers has generated much recent debate about changing school start times policies for adolescent students. Although efforts to promote and implement such changes have proliferated in the United States in recent years, they have rarely been supported by law-based arguments and messages that leverage the existing legal infrastructure regulating public education and child welfare in the United States. Furthermore, the legal bases to support or resist such changes have not been explored in detail to date. This article provides an overview of how law-based arguments and messages can be constructed and applied to advocate for later school start time policies in US public secondary schools. The legal infrastructure impacting school start time policies in the United States is briefly reviewed, including descriptions of how government regulates education, what legal obligations school officials have concerning their students' welfare, and what laws and public policies currently exist that address adolescent sleep health and safety. On the basis of this legal infrastructure, some hypothetical examples of law-based arguments and messages that could be applied to various types of advocacy activities (eg, litigation, legislative and administrative advocacy, media and public outreach) to promote later school start times are discussed. Particular consideration is given to hypothetical arguments and messages aimed at emphasizing the consistency of later school start time policies with existing child welfare law and practices, legal responsibilities of school officials and governmental authorities, and societal values and norms. Copyright © 2017 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

Engaging the community in the process of changing school start times: experience of the Cherry Creek School District.

Science.gov (United States)

Meltzer, Lisa J; McNally, Janise; Plog, Amy E; Siegfried, Scott A

2017-12-01

Despite growing evidence of the positive impact of later school start times on adolescent health and academic outcomes, relatively few districts have changed start times due to concerns about transportation, child care, and athletics/extracurricular activities. This paper provides a case study of the Cherry Creek School District's (CCSD) successful efforts to change start times. The CCSD is a diverse district with an enrollment of almost 55,000 students in suburban Denver. As part of CCSD's strategic plan, a multi-disciplinary task force was formed to examine the impact of start times on student achievement, and recommend a start time schedule driven by best practices on adolescent sleep patterns, balanced with family and community needs. Over 18 months the task force's work included engaging the community through meetings, as well as conducting a large survey (n = 24,574) of parents, teachers, and students, and gathering online feedback. An iterative process utilized feedback at every stage to refine the final recommendation given to the Board of Education. Survey results, implementation considerations, outcome evaluation plans, and lessons learned are discussed. Copyright © 2017 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

Timing of international market entry of UK and German high-tech start-ups

OpenAIRE

Bürgel, Oliver; Fier, Andreas; Licht, Georg; Murray, Gordon

2001-01-01

We examine the impact of technological product advantages, prior international experience of the management, firm size and age, country differences, and sunk costs as determinants of the timing of international market entry. The timing of internationalisation is analysed using ?event history analysis? for 600 British and German start-up companies in high-technology industries. The results indicate that the incidence of internationalization increases over time. For the majority of new firms th...

The Effect of an Altitude Training Camp on Swimming Start Time and Loaded Squat Jump Performance.

Science.gov (United States)

García-Ramos, Amador; Štirn, Igor; Padial, Paulino; Argüelles-Cienfuegos, Javier; De la Fuente, Blanca; Calderón, Carmen; Bonitch-Góngora, Juan; Tomazin, Katja; Strumbelj, Boro; Strojnik, Vojko; Feriche, Belén

2016-01-01

This study evaluated the influence of an altitude training (AT) camp on swimming start time and loaded squat jump performance. To accomplish this goal, 13 international swimmers (8 women, 5 men) were allocated to both the control (Sea Level Training, SLT) and experimental conditions (AT, 2320 m above sea level) that were separated by a one year period. All tests (15 m freestyle swimming start and loaded squat jumps with additional loads of 25%, 50%, 75%, and 100% of swimmers' body weight) were performed before and after a concurrent 3-week strength and endurance training program prescribed by the national coach. Following the SLT camp, significant impairments in swimming start times to 10 (+3.1%) and 15 m (+4.0%) were observed (P 0.05). Trivial changes in peak velocity were obtained during the loaded squat jump after both training periods (effect sizes: training high-living high strategy concurrent training of 3 weeks does not adversely affect swimming start time and loaded squat jump performance in high level swimmers, but further studies are necessary to assess the effectiveness of power-oriented resistance training in the development of explosive actions.

Starting ART following cryptococcal meningitis:The optimal time has yet to be defined

Directory of Open Access Journals (Sweden)

T A Bicanic

2013-09-01

Full Text Available Ever since the public sector rollout of antiretroviral therapy (ART in 2004, the question of the optimal time to start ART following diagnosis of an opportunistic infection has aroused controversy among South African HIV clinicians and researchers.

Setting Adolescents up for Success: Promoting a Policy to Delay High School Start Times

Science.gov (United States)

Barnes, Margaux; Davis, Krista; Mancini, Mackenzie; Ruffin, Jasmine; Simpson, Tina; Casazza, Krista

2016-01-01

Background: A unique biological shift in sleep cycles occurs during adolescence causing later sleep and wake times. This shift is not matched by a concurrent modification in school start times, resulting in sleep curtailment for a large majority of adolescents. Chronic inadequate sleep is associated with poor academic performance including…

The Effect of an Altitude Training Camp on Swimming Start Time and Loaded Squat Jump Performance.

Directory of Open Access Journals (Sweden)

Amador García-Ramos

Full Text Available This study evaluated the influence of an altitude training (AT camp on swimming start time and loaded squat jump performance. To accomplish this goal, 13 international swimmers (8 women, 5 men were allocated to both the control (Sea Level Training, SLT and experimental conditions (AT, 2320 m above sea level that were separated by a one year period. All tests (15 m freestyle swimming start and loaded squat jumps with additional loads of 25%, 50%, 75%, and 100% of swimmers' body weight were performed before and after a concurrent 3-week strength and endurance training program prescribed by the national coach. Following the SLT camp, significant impairments in swimming start times to 10 (+3.1% and 15 m (+4.0% were observed (P 0.05. Trivial changes in peak velocity were obtained during the loaded squat jump after both training periods (effect sizes: < 0.20. Based on these results we can conclude that a traditional training high-living high strategy concurrent training of 3 weeks does not adversely affect swimming start time and loaded squat jump performance in high level swimmers, but further studies are necessary to assess the effectiveness of power-oriented resistance training in the development of explosive actions.

Delaying Middle School and High School Start Times Promotes Student Health and Performance: An American Academy of Sleep Medicine Position Statement.

Science.gov (United States)

Watson, Nathaniel F; Martin, Jennifer L; Wise, Merrill S; Carden, Kelly A; Kirsch, Douglas B; Kristo, David A; Malhotra, Raman K; Olson, Eric J; Ramar, Kannan; Rosen, Ilene M; Rowley, James A; Weaver, Terri E; Chervin, Ronald D

2017-04-15

During adolescence, internal circadian rhythms and biological sleep drive change to result in later sleep and wake times. As a result of these changes, early middle school and high school start times curtail sleep, hamper a student's preparedness to learn, negatively impact physical and mental health, and impair driving safety. Furthermore, a growing body of evidence shows that delaying school start times positively impacts student achievement, health, and safety. Public awareness of the hazards of early school start times and the benefits of later start times are largely unappreciated. As a result, the American Academy of Sleep Medicine is calling on communities, school boards, and educational institutions to implement start times of 8:30 AM or later for middle schools and high schools to ensure that every student arrives at school healthy, awake, alert, and ready to learn. © 2017 American Academy of Sleep Medicine

Nuclear power: time to start again

International Nuclear Information System (INIS)

Rezak, W.D.

2004-01-01

This paper presents data which support the construction and operating successes enjoyed by energy companies that operate nuclear power plants in the US. The result is that the US nuclear industry is alive and well. Perhaps it's time to start anew the building of nuclear power plants. Over 20% of the electricity generated in the United States comes from nuclear power plants. An adequate, reliable supply of reasonably priced electric energy is not a consequence of an expanding economy and gross national product; it is an absolute necessity before such expansion can occur. It is hard to imagine any aspect of our business or personal lives not, in some way, dependent upon electricity. All over the world (in over 30 countries) nuclear power is a low-cost, secure, safe, dependable, and environmentally friendly form of electric power generation. Nuclear plants in these countries are built in six to eight years using technology developed in the US, with good performance and safety records. This treatise addresses the success experienced by the US nuclear industry over the last 40 years, and makes the case that this reliable, cost-competitive source of electric power can help support the economic engine of the country and help prevent experiences like the recent crises in California and the Northeast. Successful operation of nuclear facilities is determined by examining capacity or load factors. Load factor is the percentage of design generating capacity that a power plant actually produces over the course of a year's operation. This paper makes the case that these operating performance indicators warrant renewed consideration of the nuclear option. Usage of electricity in the US now approaches total generating capacity. The Nuclear Regulatory Commission has pre-approved construction and operating licenses for several nuclear plant designs. State public service commissions are beginning to understand that dramatic reform is required. The economy is recovering and inflation

Effect of altering starting length and activation timing of muscle on fiber strain and muscle damage.

Science.gov (United States)

Butterfield, Timothy A; Herzog, Walter

2006-05-01

Muscle strain injuries are some of the most frequent injuries in sports and command a great deal of attention in an effort to understand their etiology. These injuries may be the culmination of a series of subcellular events accumulated through repetitive lengthening (eccentric) contractions during exercise, and they may be influenced by a variety of variables including fiber strain magnitude, peak joint torque, and starting muscle length. To assess the influence of these variables on muscle injury magnitude in vivo, we measured fiber dynamics and joint torque production during repeated stretch-shortening cycles in the rabbit tibialis anterior muscle, at short and long muscle lengths, while varying the timing of activation before muscle stretch. We found that a muscle subjected to repeated stretch-shortening cycles of constant muscle-tendon unit excursion exhibits significantly different joint torque and fiber strains when the timing of activation or starting muscle length is changed. In particular, measures of fiber strain and muscle injury were significantly increased by altering activation timing and increasing the starting length of the muscle. However, we observed differential effects on peak joint torque during the cyclic stretch-shortening exercise, as increasing the starting length of the muscle did not increase torque production. We conclude that altering activation timing and muscle length before stretch may influence muscle injury by significantly increasing fiber strain magnitude and that fiber dynamics is a more important variable than muscle-tendon unit dynamics and torque production in influencing the magnitude of muscle injury.

Delayed high school start times later than 8:30am and impact on graduation rates and attendance rates.

Science.gov (United States)

McKeever, Pamela Malaspina; Clark, Linda

2017-04-01

The first purpose of this study was to investigate changes in high school graduation rates with a delayed school start time of later than 8:30am. The second aim of the study was to analyze the association between a delayed high school start time later than 8:30am and attendance rates. In the current study, a pre-post design using a repeated-measures analysis of variance was used to examine changes in attendance and graduation rates 2 years after a delayed start was implemented. Public high schools from 8 school districts (n=29 high schools) located throughout 7 different states. Schools were identified using previous research from the Children's National Medical Center's Division of Sleep Medicine Research Team. A total membership of more than 30,000 high school students enrolled in the 29 schools identified by the Children's National Medical Center's Research Team. A pre-post design was used for a within-subject design, controlling for any school-to-school difference in the calculation of the response variable. This is the recommended technique for a study that may include data with potential measurement error. Findings from this study linked a start time of later than 8:30am to improved attendance rates and graduation rates. Attendance rates and graduation rates significantly improved in schools with delayed start times of 8:30am or later. School officials need to take special notice that this investigation also raises questions about whether later start times are a mechanism for closing the achievement gap due to improved graduation rates. Copyright © 2017 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

Effects of various intake valve timings and spark timings on combustion, cyclic THC and NOX emissions during cold start phase with idle operation in CVVT engine

International Nuclear Information System (INIS)

Choi, Kwan Hee; Lee, Hyung Min; Hwang, In Goo; Myung, Cha Lee; Park, Sim Soo

2008-01-01

In a gasoline SI engine, valve events and spark timings put forth a major influence on overall efficiency, fuel economy, and exhaust emissions. Residual gases controlled by the valve overlap can be used to reduce NOx emissions and the spark retardation technique can be used to improve raw THC emissions and catalyst light-off performance during the cold start phase. This paper investigated the behaviors of the engine and its combustion characteristics with various intake valve timings and spark timings during the fast idle condition and cold start. And cyclic THC and NOx emissions were measured at the exhaust port and their formation mechanisms were examined with fast response gas analyzers. As a result, THCs and NOx were reduced by 35% and 23% with optimizing valve overlap and spark advance during the cold transient start phase. Consequently, the valve events and ignition timings were found to significantly affect combustion phenomena and cold-start emissions

The Static Eccentricity Fault Diagnosis in Time Domain at Line Start Permanent Magnet Synchronous Motor

OpenAIRE

DOGAN, Zafer

2016-01-01

Recently, Line Start Permanent Magnet Synchronous Motor have been commonly utilized in industrial areas because of their high efficiency. Motor faults during operation cause losses of production and high maintenance and repair expenditures. In this study, the effect of static eccentricity fault on line start permanent magnet synchronous motor was investigated. The simulation models of motor belonging to healthy and fault status were formed via Finite Elements Method. The analyses in time doma...

The use of knowledge-based Genetic Algorithm for starting time optimisation in a lot-bucket MRP

Science.gov (United States)

Ridwan, Muhammad; Purnomo, Andi

2016-01-01

In production planning, Material Requirement Planning (MRP) is usually developed based on time-bucket system, a period in the MRP is representing the time and usually weekly. MRP has been successfully implemented in Make To Stock (MTS) manufacturing, where production activity must be started before customer demand is received. However, to be implemented successfully in Make To Order (MTO) manufacturing, a modification is required on the conventional MRP in order to make it in line with the real situation. In MTO manufacturing, delivery schedule to the customers is defined strictly and must be fulfilled in order to increase customer satisfaction. On the other hand, company prefers to keep constant number of workers, hence production lot size should be constant as well. Since a bucket in conventional MRP system is representing time and usually weekly, hence, strict delivery schedule could not be accommodated. Fortunately, there is a modified time-bucket MRP system, called as lot-bucket MRP system that proposed by Casimir in 1999. In the lot-bucket MRP system, a bucket is representing a lot, and the lot size is preferably constant. The time to finish every lot could be varying depends on due date of lot. Starting time of a lot must be determined so that every lot has reasonable production time. So far there is no formal method to determine optimum starting time in the lot-bucket MRP system. Trial and error process usually used for it but some time, it causes several lots have very short production time and the lot-bucket MRP would be infeasible to be executed. This paper presents the use of Genetic Algorithm (GA) for optimisation of starting time in a lot-bucket MRP system. Even though GA is well known as powerful searching algorithm, however, improvement is still required in order to increase possibility of GA in finding optimum solution in shorter time. A knowledge-based system has been embedded in the proposed GA as the improvement effort, and it is proven that the

Effects of school start time on students' sleep duration, daytime sleepiness, and attendance: a meta-analysis.

Science.gov (United States)

Bowers, Jennifer M; Moyer, Anne

2017-12-01

Research conducted over the past three decades finds that many children and adolescents do not meet recommended sleep guidelines. Lack of sleep is a predictor of a number of consequences, including issues at school such as sleepiness and tardiness. Considering the severity of this public health issue, it is essential to understand more about the factors that may compromise children's and adolescents' sleep. This meta-analysis examined the effects of school start time (SST) on sleep duration of students by aggregating the results of five longitudinal studies and 15 cross-sectional comparison group studies. Results indicated that later starting school times are associated with longer sleep durations. Additionally, later start times were associated with less daytime sleepiness (7 studies) and tardiness to school (3 studies). However, methodological considerations, such as a need for more longitudinal primary research, lead to a cautious interpretation. Overall, this systematic analysis of SST studies suggests that delaying SST is associated with benefits for students' sleep and, thus, their general well-being. Copyright © 2017 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

Using Start/End Timings of Spectral Transitions Between Phonemes in Concatenative Speech Synthesis

OpenAIRE

Toshio Hirai; Seiichi Tenpaku; Kiyohiro Shikano

2002-01-01

The definition of "phoneme boundary timing" in a speech corpus affects the quality of concatenative speech synthesis systems. For example, if the selected speech unit is not appropriately match to the speech unit of the required phoneme environment, the quality may be degraded. In this paper, a dynamic segment boundary defi- nition is proposed. In the definition, the concatenation point is chosen from the start or end timings of spectral transition depending on the phoneme environment at the ...

A Boom Time for Education Start-Ups

Science.gov (United States)

DeSantis, Nick

2012-01-01

Harsh economic realities mean trouble for college leaders. But where administrators perceive an impending crisis, investors increasingly see opportunity. In recent years, venture capitalists have poured millions into education-technology start-ups, trying to cash in on a market they see as ripe for a digital makeover. And lately, those wagers have…

Dense grid of narrow bandpass filters for the JST/T250 telescope: summary of results

Science.gov (United States)

Brauneck, Ulf; Sprengard, Ruediger; Bourquin, Sebastien; Marín-Franch, Antonio

2018-01-01

On the Javalambre mountain in Spain, the Centro de Estudios de Fisica del Cosmos de Aragon has setup two telescopes, the JST/T250 and the JAST/T80. The JAST/T80 telescope integrates T80Cam, a large format, single CCD camera while the JST/T250 will mount the JPCam instrument, a 1.2Gpix camera equipped with a 14-CCD mosaic using the new large format e2v 9.2k×9.2k 10-μm pixel detectors. Both T80Cam and JPCam integrate a large number of filters in dimensions of 106.8×106.8 mm2 and 101.7×95.5 mm2, respectively. For this instrument, SCHOTT manufactured 56 specially designed steep edged bandpass interference filters, which were recently completed. The filter set consists of bandpass filters in the range between 348.5 and 910 nm and a longpass filter at 915 nm. Most of the filters have full-width at half-maximum (FWHM) of 14.5 nm and a blocking between 250 and 1050 nm with optical density of OD5. Absorptive color glass substrates in combination with interference filters were used to minimize residual reflection in order to avoid ghost images. In spite of containing absorptive elements, the filters show the maximum possible transmission. This was achieved by using magnetron sputtering for the filter coating process. The most important requirement for the continuous photometric survey is the tight tolerancing of the central wavelengths and FWHM of the filters. This insures each bandpass has a defined overlap with its neighbors. A high image quality required a low transmitted wavefront error (<λ/4 locally and <λ/2 on the whole aperture), which was achieved even by combining two or three substrates. We report on the spectral and interferometric results measured on the whole set of filters.

Comparison of minute distribution frequency for anesthesia start and end times from an anesthesia information management system and paper records.

Science.gov (United States)

Phelps, Michael; Latif, Asad; Thomsen, Robert; Slodzinski, Martin; Raghavan, Rahul; Paul, Sharon Leigh; Stonemetz, Jerry

2017-08-01

Use of an anesthesia information management system (AIMS) has been reported to improve accuracy of recorded information. We tested the hypothesis that analyzing the distribution of times charted on paper and computerized records could reveal possible rounding errors, and that this effect could be modulated by differences in the user interface for documenting certain event times with an AIMS. We compared the frequency distribution of start and end times for anesthesia cases completed with paper records and an AIMS. Paper anesthesia records had significantly more times ending with "0" and "5" compared to those from the AIMS (p < 0.001). For case start times, AIMS still exhibited end-digit preference, with times whose last digits had significantly higher frequencies of "0" and "5" than other integers. This effect, however, was attenuated compared to that for paper anesthesia records. For case end times, the distribution of minutes recorded with AIMS was almost evenly distributed, unlike those from paper records that still showed significant end-digit preference. The accuracy of anesthesia case start times and case end times, as inferred by statistical analysis of the distribution of the times, is enhanced with the use of an AIMS. Furthermore, the differences in AIMS user interface for documenting case start and case end times likely affects the degree of end-digit preference, and likely accuracy, of those times.

Why START?

International Nuclear Information System (INIS)

Mendelsohn, J.

1991-01-01

Barring some major unexpected downturn in US-Soviet relations, it seems likely that the long-awaited Strategic Arms Reduction Talks (START) treaty will be signed sometime in 1991. Under negotiation for the past nine years, public acceptance and Senate approval of a START treaty will be facilitated by the generally less confrontational East-West relationship which has evolved over that time, by the growing constraints on the US defense budget, and by the obvious merits of the treaty itself. Not only will the nearly complete START treaty be an extremely useful and powerful arms control agreement, it is also decidedly advantageous to US security interests. First and foremost, a START treaty will cap and reduce the steady buildup of nuclear weapons that has characterized the last 30 years of the US-Soviet strategic relationship. As a result of the basic outline originally agreed to at the Reykjavik summit, START will take a 25 to 35 percent bite out of existing nuclear arsenals, impose approximately a 50 percent cut in overall Soviet ballistic missile warheads and throw-weight (lifting power or payload capacity), and produce an exact 50 percent cut in Soviet SS-18 missiles

High School Start Times and the Impact on High School Students: What We Know, and What We Hope to Learn

Science.gov (United States)

Morgenthaler, Timothy I.; Hashmi, Sarah; Croft, Janet B.; Dort, Leslie; Heald, Jonathan L.; Mullington, Janet

2016-01-01

Study Objectives: Several organizations have provided recommendations to ensure high school starts no sooner than 08:30. However, although there are plausible biological reasons to support such recommendations, published recommendations have been based largely on expert opinion and a few observational studies. We sought to perform a critical review of published evidence regarding the effect of high school start times on sleep and other relevant outcomes. Methods: We performed a broad literature search to identify 287 candidate publications for inclusion in our review, which focused on studies offering direct comparison of sleep time, academic or physical performance, behavioral health measures, or motor vehicular accidents in high school students. Where possible, outcomes were combined for meta-analysis. Results: After application of study criteria, only 18 studies were suitable for review. Eight studies were amenable to meta-analysis for some outcomes. We found that later school start times, particularly when compared with start times more than 60 min earlier, are associated with longer weekday sleep durations, lower weekday-weekend sleep duration differences, reduced vehicular accident rates, and reduced subjective daytime sleepiness. Improvement in academic performance and behavioral issues is less established. Conclusions: The literature regarding effect of school start time delays on important aspects of high school life suggests some salutary effects, but often the evidence is indirect, imprecise, or derived from cohorts of convenience, making the overall quality of evidence weak or very weak. This review highlights a need for higher-quality data upon which to base important and complex public health decisions. Citation: Morgenthaler TI, Hashmi S, Croft JB, Dort L, Heald JL, Mullington J. High school start times and the impact on high school students: what we know, and what we hope to learn. J Clin Sleep Med 2016;12(12):1681–1689. PMID:27855730

School Start Times, Sleep, Behavioral, Health, and Academic Outcomes: A Review of the Literature

Science.gov (United States)

Wheaton, Anne G.; Chapman, Daniel P.; Croft, Janet B.

2016-01-01

Background: Insufficient sleep in adolescents has been shown to be associated with a wide variety of adverse outcomes, from poor mental and physical health to behavioral problems and lower academic grades. However, most high school students do not get sufficient sleep. Delaying school start times for adolescents has been proposed as a policy…

The impact of dry-land sprint start training on the short track speed skating start.

Science.gov (United States)

Haug, William B; Drinkwater, Eric J; Cicero, Nicholas J; Barthell, J Anthony; Chapman, Dale W

2017-05-05

This investigation sought to determine the effects of dry-land sprint start training on short track speed skating (STSS) start performance. Nine highly trained short track athletes completed a control period of normal STSS training followed by a four-week training intervention. Before and after the control and intervention periods, athletes performed three electronically timed dry-land and on-ice 14.43 m maximal sprint start efforts. The intervention consisted of two sprint sessions per week consisting of nine electronically timed 14.43 m dry-land sprint starts in addition to normal STSS training. The control period resulted in no substantial change in on-ice start performance (Mean Δ: -0.01 s, 95% Confidence Limits (CL): -0.08 to 0.05 s; Effect Size (ES): -0.05; Trivial) however, a small change was observed in dry-land start performance (Mean Δ: -0.07 s, 95% CL: -0.13 to -0.02 s; ES: -0.49). Following brief specific dry-land sprint start training a small improvement was observed in both on-ice (Mean Δ: -0.07 s, 95% CL: -0.13 to -0.01 s; ES: -0.33) and dry-land (Mean Δ: -0.04 s, 95% CL: -0.09 to 0.00 s; ES: -0.29) start performance. This investigation suggests STSS start performance can be improved through a brief dry-land sprint start training program.

Application of artificial neural network to predict the optimal start time for heating system in building

International Nuclear Information System (INIS)

Yang, In-Ho; Yeo, Myoung-Souk; Kim, Kwang-Woo

2003-01-01

The artificial neural network (ANN) approach is a generic technique for mapping non-linear relationships between inputs and outputs without knowing the details of these relationships. This paper presents an application of the ANN in a building control system. The objective of this study is to develop an optimized ANN model to determine the optimal start time for a heating system in a building. For this, programs for predicting the room air temperature and the learning of the ANN model based on back propagation learning were developed, and learning data for various building conditions were collected through program simulation for predicting the room air temperature using systems of experimental design. Then, the optimized ANN model was presented through learning of the ANN, and its performance to determine the optimal start time was evaluated

STARTing Again: What Happens After START I Expires?

International Nuclear Information System (INIS)

Mladineo, Stephen V.; Durbin, Karyn R.; Eastman, Christina M.

2007-01-01

The Strategic Arms Reduction Treaty (START I), a seminal arms control agreement that substantially reduced the levels of deployed strategic nuclear arms in the United States and Russia, will expire in December 2009. At this time, it is unclear what - if anything - will replace it. While the treaty remains relevant, more than a simple extension is appropriate. Instead the authors advocate for a successor regime that builds on the START I legacy but does not rely on the traditional tools of arms control. This paper examines the strategic context in which a successor regime would be developed and proposes several recommendations for future action

Strategies for the optimal timing to start renal replacement therapy in critically ill patients with acute kidney injury.

Science.gov (United States)

Bagshaw, Sean M; Wald, Ron

2017-05-01

Renal replacement therapy (RRT) is increasingly utilized to support critically ill patients with severe acute kidney injury (AKI). The question of whether and when to start RRT for a critically ill patient with AKI has long troubled clinicians. When severe complications of AKI develop, the need to commence RRT is unambiguous. In the absence of such complications but in the presence of severe AKI, the optimal time and thresholds for starting RRT are uncertain. The majority of existing data have largely been derived from observational studies. These have been limited due to confounding by indication, considerable heterogeneity in case mix and illness severity, and variably applied definitions for both AKI and for how "timing" was anchored relative to starting RRT. It is unclear whether a preemptive or earlier strategy of RRT initiation aimed largely at avoiding complications related to AKI or a more conservative strategy where RRT is started in response to developing complications leads to better patient-centered outcomes and health services use. This question has been the focus of 2 recently completed randomized trials. In this review, we provide an appraisal of available evidence, discuss existing knowledge gaps, and provide perspective on future research that will better inform the optimal timing of RRT initiation in AKI. Copyright © 2016 International Society of Nephrology. Published by Elsevier Inc. All rights reserved.

High School Start Times and the Impact on High School Students: What We Know, and What We Hope to Learn.

Science.gov (United States)

Morgenthaler, Timothy I; Hashmi, Sarah; Croft, Janet B; Dort, Leslie; Heald, Jonathan L; Mullington, Janet

2016-12-15

Several organizations have provided recommendations to ensure high school starts no sooner than 08:30. However, although there are plausible biological reasons to support such recommendations, published recommendations have been based largely on expert opinion and a few observational studies. We sought to perform a critical review of published evidence regarding the effect of high school start times on sleep and other relevant outcomes. We performed a broad literature search to identify 287 candidate publications for inclusion in our review, which focused on studies offering direct comparison of sleep time, academic or physical performance, behavioral health measures, or motor vehicular accidents in high school students. Where possible, outcomes were combined for meta-analysis. After application of study criteria, only 18 studies were suitable for review. Eight studies were amenable to meta-analysis for some outcomes. We found that later school start times, particularly when compared with start times more than 60 min earlier, are associated with longer weekday sleep durations, lower weekday-weekend sleep duration differences, reduced vehicular accident rates, and reduced subjective daytime sleepiness. Improvement in academic performance and behavioral issues is less established. The literature regarding effect of school start time delays on important aspects of high school life suggests some salutary effects, but often the evidence is indirect, imprecise, or derived from cohorts of convenience, making the overall quality of evidence weak or very weak. This review highlights a need for higher-quality data upon which to base important and complex public health decisions. © 2016 American Academy of Sleep Medicine

Radiation therapy of Graves' ophthalmopathy. 2; Therapy started time

Energy Technology Data Exchange (ETDEWEB)

Kawamura, Toshinori; Koga, Sukehiko (Fujita Health Univ., Toyoake, Aichi (Japan). School of Medicine)

1994-04-01

The difference in the improvement of exophthalmos according to the period of starting radiation therapy was investigated for 26 patients of thyroid ophthalmopathy, also taking thyroidism during radiation into consideration. A 4 MV X-ray was used to a total dose of 20 Gy per 2 weeks. The treatment value tended to be better for the patients in whom the period from the appearance of exophthalmos in an euthyroid condition to the start of radiation was less than 12 months; those of a longer period showed poorer improvement. Radiation treatment of a hyperthyroid condition also showed poor results and it was thought it was not an adequately long enough period for the radiation to take effect. As a result, it was considered that the radiation therapy shall be advantageous if started within 12 months after the appearance of exophthalmos in an euthyroid condition. (author).

Relationship between the start times of flares and CMEs to the time of potential radiation hazards

Science.gov (United States)

Kang, G.; Zheng, Y.; Kuznetsova, M. M.

2013-12-01

Solar flares, short-term outbursts of energy of the Sun, and coronal mass ejections (CME), massive bursts of solar matter, are two solar phenomena that are known to increase solar energetic particles in space. Increased solar energetic particles cause immense radiation that poses a serious threat to astronauts in space, radio communication signals, and passengers on high-latitude flights on the Earth. The relationship between the start times of flares and CMEs to the time of potential radiation hazards was investigated to determine how much warning time is available. Additionally, this project compared the difference between these relationships for four energy levels of solar energetic particles: proton flux exceeding 10 MeV, 30 MeV, 50 MeV and 100 MeV. This project gathered data of 22 recent SEP events between 2010 and 2012 and the parameters of associated CMEs and flares. Through the use of IDL (Interactive Data Language) programming, thorough analysis was conducted, including 2-sample t-tests and Kruskal-Wallis tests for 2 or more samples. The average lead time to warn humans of possible radiation hazard from the detection of a flare and a CME occurrence was found to be around 12 to 20 hours. The lead time was the greatest for the lowest energy level, though the differences in energy levels and that between the lead times for CME and flares were found to be statistically insignificant with p-values exceeding the alpha value of 0.20.

Implementasi Jaringan Syaraf Tiruan Recurrent Dengan Metode Pembelajaran Gradient Descent Adaptive Learning Rate Untuk Pendugaan Curah Hujan

OpenAIRE

Salman, Afan Galih

2011-01-01

Penggunaan teknologi di bidang Artificial Intellegence khususnya teknologi Jaringan Syaraf Tiruan (JST) dalampendugaan curah hujan dapat dilakukan dengan metoda pendekatan pembelajaran. Berdasarkan kemampuanbelajar yang dimilikinya, maka JST dapat dilatih untuk mempelajari dan menganalisa pola data masa lalu danberusaha mencari suatu formula atau fungsi yang akan menghubungkan pola data masa lalu dengan keluaranyang diinginkan pada saat ini. Keakuratan hasil prediksi JST diukur berdasarkan ko...

Evaluation of hearing ability in Danish children at the time of school start and at the end of school

DEFF Research Database (Denmark)

Gissel, S.; Mortensen, Jens Tølbøll; Juul, S.

2002-01-01

Since previous studies have shown reduced hearing ability in children and adolescents at school start, this study was undertaken to evaluate the hearing ability in Danish children at the time of start and end of school. Children starting school in 1977, 1987, and 1997 from four minor municipalities....... At the end of school, hearing ability of the year group 1977 was just as poor as for the year group 1987. Whether reduced hearing can influence the learning abilities of these children should be evaluated by further studies including information on the exposure to noise....

Evaluation of hearing ability in Danish children at the time of school start and at the end of school

DEFF Research Database (Denmark)

Gissel, S.; Mortensen, Jens Tølbøll; Juul, S.

2002-01-01

Since previous studies have shown reduced hearing ability in children and adolescents at school start, this study was undertaken to evaluate the hearing ability in Danish children at the time of start and end of school. Children starting school in 1977, 1987, and 1997 from four minor municipalities...... in North Jutland County, Denmark were evaluated for hearing ability by a review of 1,605 school health records. We found a higher prevalence of impaired hearing ability in children who started school 1987 and 1997 compared to those who started school 1977. Reduced hearing was typically at high frequencies....... At the end of school, hearing ability of the year group 1977 was just as poor as for the year group 1987. Whether reduced hearing can influence the learning abilities of these children should be evaluated by further studies including information on the exposure to noise....

Earlier School Start Times as a Risk Factor for Poor School Performance: An Examination of Public Elementary Schools in the Commonwealth of Kentucky

Science.gov (United States)

Keller, Peggy S.; Smith, Olivia A.; Gilbert, Lauren R.; Bi, Shuang; Haak, Eric A.; Buckhalt, Joseph A.

2015-01-01

Adequate sleep is essential for child learning. However, school systems may inadvertently be promoting sleep deprivation through early school start times. The current study examines the potential implications of early school start times for standardized test scores in public elementary schools in Kentucky. Associations between early school start…

What Happens at the Lesson Start?

Science.gov (United States)

Saloviita, Timo

2016-01-01

Transitional periods, such as lesson starts, are necessary steps from one activity to another, but they also compete with time for actual learning. The aim of the present study was to replicate a previous pilot study on lesson starts and explore possible disturbances. In total, 130 lesson starts in Finnish basic education in grades 1-9 were…

Biomechanical Analysis of the Swim-Start: A Review

Directory of Open Access Journals (Sweden)

Julien Vantorre, Didier Chollet, Ludovic Seifert

2014-06-01

Full Text Available This review updates the swim-start state of the art from a biomechanical standpoint. We review the contribution of the swim-start to overall swimming performance, the effects of various swim-start strategies, and skill effects across the range of swim-start strategies identified in the literature. The main objective is to determine the techniques to focus on in swimming training in the contemporary context of the sport. The phases leading to key temporal events of the swim-start, like water entry, require adaptations to the swimmer’s chosen technique over the course of a performance; we thus define the swim-start as the moment when preparation for take-off begins to the moment when the swimming pattern begins. A secondary objective is to determine the role of adaptive variability as it emerges during the swim-start. Variability is contextualized as having a functional role and operating across multiple levels of analysis: inter-subject (expert versus non-expert, inter-trial or intra-subject (through repetitions of the same movement, and inter-preference (preferred versus non-preferred technique. Regarding skill effects, we assume that swim-start expertise is distinct from swim stroke expertise. Highly skilled swim-starts are distinguished in terms of several factors: reaction time from the start signal to the impulse on the block, including the control and regulation of foot force and foot orientation during take-off; appropriate amount of glide time before leg kicking commences; effective transition from leg kicking to break-out of full swimming with arm stroking; overall maximal leg and arm propulsion and minimal water resistance; and minimized energy expenditure through streamlined body position. Swimmers who are less expert at the swim-start spend more time in this phase and would benefit from training designed to reduce: (i the time between reaction to the start signal and impulse on the block, and (ii the time in transition (i

COLD START CHARACTERISTICS STUDY BASED ON REAL TIME NO EMISSIONS IN AN LPG SI ENGINE

Directory of Open Access Journals (Sweden)

Yingli Zu

2010-01-01

Full Text Available Normally, cylinder pressure was used as a criterion of combustion occurrence, while in some conditions, it may be unreliable when identifying lean mixture combustion. This is particularly important for fuels like liquefied petroleum gas, which has good capacity for lean combustion. In this study, a fast response NO detector, based on the chemiluminescence method, was used to measure real time NO emissions in order to evaluate the technique as a criterion for establishing combustion occurrence. Test results show that real time NO emissions can be used to identify the cylinder combustion and misfire occurrence during engine cranking, and real time NO emissions can be used to understand the combustion and misfire occurrence. Real time NO emissions mostly happened in first several cycles during cold start, and NO emissions increased with the spark timing advancing.

Drug Abuse Prevention Starts with Parents

Science.gov (United States)

... Stages Listen Español Text Size Email Print Share Drug Abuse Prevention Starts with Parents Page Content Article Body ... for a time when drugs may be offered. Drug abuse prevention starts with parents learning how to talk ...

Database Description - NBDC NikkajiRDF | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available or Name: Japan Science and Technology Agency (JST) Creator Affiliation: Contact a...e information Database maintenance site Japan Science and Technology Agency (JST) URL of the original websit

The Gift of Time? School Starting Age and Mental Health

DEFF Research Database (Denmark)

Sievertsen, Hans Henrik; S. Dee, Thomas

2018-01-01

influences student outcomes by relying on linked Danish survey and register data that include several distinct, widely used, and validated measures of mental health that are reported out-of-school among similarly aged children. We estimate the causal effects of delayed school enrollment using a "fuzzy.......7), a measure of self regulation with strong negative links to student achievement. We also find that this large and targeted effect persists at age 11. However, the estimated effects of school starting age on other mental-health constructs, which have weaker links to subsequent student achievement, are smaller......In many developed countries, children now begin their formal schooling at an older age. However, a growing body of empirical studies provides little evidence that such schooling delays improve educational and economic outcomes. This study presents new evidence on whether school starting age...

Relationship Between Final Performance and Block Times with the Traditional and the New Starting Platforms with A Back Plate in International Swimming Championship 50-M and 100-M Freestyle Events

Science.gov (United States)

Garcia-Hermoso, Antonio; Escalante, Yolanda; Arellano, Raul; Navarro, Fernando; Domínguez, Ana M.; Saavedra, Jose M.

2013-01-01

The purpose of this study was to investigate the association between block time and final performance for each sex in 50-m and 100-m individual freestyle, distinguishing between classification (1st to 3rd, 4th to 8th, 9th to 16th) and type of starting platform (old and new) in international competitions. Twenty-six international competitions covering a 13-year period (2000-2012) were analysed retrospectively. The data corresponded to a total of 1657 swimmers’ competition histories. A two-way ANOVA (sex x classification) was performed for each event and starting platform with the Bonferroni post-hoc test, and another two-way ANOVA for sex and starting platform (sex x starting platform). Pearson’s simple correlation coefficient was used to determine correlations between the block time and the final performance. Finally, a simple linear regression analysis was done between the final time and the block time for each sex and platform. The men had shorter starting block times than the women in both events and from both platforms. For 50-m event, medalists had shorter block times than semi- finalists with the old starting platforms. Block times were directly related to performance with the old starting platforms. With the new starting platforms, however, the relationship was inverse, notably in the women’s 50-m event. The block time was related for final performance in the men’s 50- m event with the old starting platform, but with the new platform it was critical only for the women’s 50-m event. Key Points The men had shorter block times than the women in both events and with both platforms. For both distances, the swimmers had shorter block times in their starts from the new starting platform with a back plate than with the old platform. For the 50-m event with the old starting platform, the medalists had shorter block times than the semi-finalists. The new starting platform block time was only determinant in the women’s 50-m event. In order to improve

Real time NO emissions measurement during cold start in LPG SI engine

International Nuclear Information System (INIS)

Li, Gong; Liu, Zhimin; Li, Zhilong; Qiu, Dongping; Li, Liguang

2007-01-01

To identify combustion occurrence is very important. Traditionally, cylinder pressure has been used as a criterion of combustion occurrence, but it can be unreliable when identifying lean mixture combustion (there is little difference in the cylinder pressure trace between the firing cycle and motoring cycles at the lean combustion limit). This is particularly important for fuels like LPG, which have a good capacity for lean combustion. In this study, a fast response NO detector, CambustionfNOx400, based on the chemiluminescence method, was used to measure real time NO emissions in order to evaluate the technique as a criterion for establishing combustion occurrence. At the same time, this paper presents an investigation of the characteristics of real time NO emissions of the first firing cycle during cold start in a LPG SI engine to determine the optimal excess air factor of the first firing cycle, and the cylinder pressure and crank shaft speed of the engine were measured and recorded. Test results show that the excess air ratio directly influences the cylinder pressure, engine speed and NO emissions of the first firing cycle. As the excess air coefficient is reduced from the lean misfiring limit, NO emissions increase quickly, then reduce quickly and then reduce slowly. NO emissions generally increase with peak cylinder pressure, even at constant excess air coefficient. Real time NO emissions can be used to identify cylinder combustion and misfire occurrence during engine cranking, even at the dilute combustion limit, and real time NO emission can be used to understand the combustion and misfire occurrence. (author)

The effect of handover location on trauma theatre start time: An estimated cost saving of £131 000 per year.

Science.gov (United States)

Nahas, Sam; Ali, Adam; Majid, Kiran; Joseph, Roshan; Huber, Chris; Babu, Victor

2018-02-08

The National Health Service was estimated to be in £2.45 billion deficit in 2015 to 2016. Trauma theatre utilization and efficiency has never been so important as it is estimated to cost £15/minute. Structured questionnaires were given to 23 members of staff at our Trust who are actively involved in the organization or delivery of orthopaedic trauma lists at least once per week. This was used to identify key factors that may improve theatre efficiency. Following focus group evaluation, the location of the preoperative theatre meeting was changed, with all staff involved being required to attend this. Our primary outcome measure was mean theatre start time (time of arrival in the anaesthetic room) during the 1 month immediately preceding the change and the month following the change. Theatre start time was improved on average 24 minutes (1 month premeeting and postmeeting change). This equates to a saving of £360 per day, or £131 040 per year. Changing the trauma meeting location to a venue adjacent to the trauma theatre can improve theatre start times, theatre efficiency, and therefore result in significant cost savings. Copyright © 2018 John Wiley & Sons, Ltd.

Relationship Between Final Performance and Block Times with the Traditional and the New Starting Platforms with A Back Plate in International Swimming Championship 50-M and 100-M Freestyle Events

Directory of Open Access Journals (Sweden)

Antonio Garcia-Hermoso

2013-12-01

Full Text Available The purpose of this study was to investigate the association between block time and final performance for each sex in 50-m and 100-m individual freestyle, distinguishing between classification (1st to 3rd, 4th to 8th, 9th to 16th and type of starting platform (old and new in international competitions. Twenty-six international competitions covering a 13-year period (2000-2012 were analysed retrospectively. The data corresponded to a total of 1657 swimmers’ competition histories. A two-way ANOVA (sex x classification was performed for each event and starting platform with the Bonferroni post-hoc test, and another two-way ANOVA for sex and starting platform (sex x starting platform. Pearson’s simple correlation coefficient was used to determine correlations between the block time and the final performance. Finally, a simple linear regression analysis was done between the final time and the block time for each sex and platform. The men had shorter starting block times than the women in both events and from both platforms. For 50-m event, medalists had shorter block times than semi- finalists with the old starting platforms. Block times were directly related to performance with the old starting platforms. With the new starting platforms, however, the relationship was inverse, notably in the women’s 50-m event. The block time was related for final performance in the men’s 50- m event with the old starting platform, but with the new platform it was critical only for the women’s 50-m event.

Press Start

Science.gov (United States)

Harteveld, Casper

This level sets the stage for the design philosophy called “Triadic Game Design” (TGD). This design philosophy can be summarized with the following sentence: it takes two to tango, but it takes three to design a meaningful game or a game with a purpose. Before the philosophy is further explained, this level will first delve into what is meant by a meaningful game or a game with a purpose. Many terms and definitions have seen the light and in this book I will specifically orient at digital games that aim to have an effect beyond the context of the game itself. Subsequently, a historical overview is given of the usage of games with a serious purpose which starts from the moment we human beings started to walk on our feet till our contemporary society. It turns out that we have been using games for all kinds of non-entertainment purposes for already quite a long time. With this introductory material in the back of our minds, I will explain the concept of TGD by means of a puzzle. After that, the protagonist of this book, the game Levee Patroller, is introduced. Based on the development of this game, the idea of TGD, which stresses to balance three different worlds, the worlds of Reality, Meaning, and Play, came into being. Interested? Then I suggest to quickly “press start!”

A cross-cultural comparison of sleep duration between US And Australian adolescents: the effect of school start time, parent-set bedtimes, and extracurricular load.

Science.gov (United States)

Short, Michelle A; Gradisar, Michael; Lack, Leon C; Wright, Helen R; Dewald, Julia F; Wolfson, Amy R; Carskadon, Mary A

2013-06-01

To test whether sleep duration on school nights differs between adolescents in Australia and the United States and, if so, whether this difference is explained by cultural differences in school start time, parental involvement in setting bedtimes, and extracurricular commitments. Three hundred eighty-five adolescents aged 13 to 18 years (M = 15.57, SD = 0.95; 60% male) from Australia and 302 adolescents aged 13 to 19 years (M = 16.03, SD = 1.19; 35% male) from the United States. Adolescents completed the School Sleep Habits Survey during class time, followed by an 8-day sleep diary. After controlling for age and gender, Australian adolescents obtained an average of 47 minutes more sleep per school night than those in the United States. Australian adolescents were more likely to have a parent-set bedtime (17.5% vs. 6.8%), have a later school start time (8:32 a.m. vs. 7:45 a.m.), and spend less time per day on extracurricular commitments (1 h 37 min vs. 2 h 41 min) than their U.S. peers. The mediating factors of parent-set bedtimes, later school start times, and less time spent on extracurricular activities were significantly associated with more total sleep. In addition to biological factors, extrinsic cultural factors significantly affect adolescent sleep. The present study highlights the importance of a cross-cultural, ecological approach and the impact of early school start times, lack of parental limit setting around bedtimes, and extracurricular load in limiting adolescent sleep.

77 FR 53187 - Advisory Council on Dependents' Education; Notice of Open Meeting

Science.gov (United States)

2012-08-31

... Daylight Savings Time (EDST); Stuttgart and Wiesbaden, Germany, from 2 p.m. to 6 p.m., Central European Summer Time (CEST); Okinawa, Japan, from 9 p.m. to 1 a.m., Japan Standard Time (JST); Honolulu, Hawaii... 12 p.m., Eastern Daylight Savings Time (EDST). ADDRESSES: 4800 Mark Center Drive, Alexandria, VA...

Adaptation to shift work: physiologically based modeling of the effects of lighting and shifts' start time.

Directory of Open Access Journals (Sweden)

Svetlana Postnova

Full Text Available Shift work has become an integral part of our life with almost 20% of the population being involved in different shift schedules in developed countries. However, the atypical work times, especially the night shifts, are associated with reduced quality and quantity of sleep that leads to increase of sleepiness often culminating in accidents. It has been demonstrated that shift workers' sleepiness can be improved by a proper scheduling of light exposure and optimizing shifts timing. Here, an integrated physiologically-based model of sleep-wake cycles is used to predict adaptation to shift work in different light conditions and for different shift start times for a schedule of four consecutive days of work. The integrated model combines a model of the ascending arousal system in the brain that controls the sleep-wake switch and a human circadian pacemaker model. To validate the application of the integrated model and demonstrate its utility, its dynamics are adjusted to achieve a fit to published experimental results showing adaptation of night shift workers (n = 8 in conditions of either bright or regular lighting. Further, the model is used to predict the shift workers' adaptation to the same shift schedule, but for conditions not considered in the experiment. The model demonstrates that the intensity of shift light can be reduced fourfold from that used in the experiment and still produce good adaptation to night work. The model predicts that sleepiness of the workers during night shifts on a protocol with either bright or regular lighting can be significantly improved by starting the shift earlier in the night, e.g.; at 21:00 instead of 00:00. Finally, the study predicts that people of the same chronotype, i.e. with identical sleep times in normal conditions, can have drastically different responses to shift work depending on their intrinsic circadian and homeostatic parameters.

Adaptation to shift work: physiologically based modeling of the effects of lighting and shifts' start time.

Science.gov (United States)

Postnova, Svetlana; Robinson, Peter A; Postnov, Dmitry D

2013-01-01

Shift work has become an integral part of our life with almost 20% of the population being involved in different shift schedules in developed countries. However, the atypical work times, especially the night shifts, are associated with reduced quality and quantity of sleep that leads to increase of sleepiness often culminating in accidents. It has been demonstrated that shift workers' sleepiness can be improved by a proper scheduling of light exposure and optimizing shifts timing. Here, an integrated physiologically-based model of sleep-wake cycles is used to predict adaptation to shift work in different light conditions and for different shift start times for a schedule of four consecutive days of work. The integrated model combines a model of the ascending arousal system in the brain that controls the sleep-wake switch and a human circadian pacemaker model. To validate the application of the integrated model and demonstrate its utility, its dynamics are adjusted to achieve a fit to published experimental results showing adaptation of night shift workers (n = 8) in conditions of either bright or regular lighting. Further, the model is used to predict the shift workers' adaptation to the same shift schedule, but for conditions not considered in the experiment. The model demonstrates that the intensity of shift light can be reduced fourfold from that used in the experiment and still produce good adaptation to night work. The model predicts that sleepiness of the workers during night shifts on a protocol with either bright or regular lighting can be significantly improved by starting the shift earlier in the night, e.g.; at 21:00 instead of 00:00. Finally, the study predicts that people of the same chronotype, i.e. with identical sleep times in normal conditions, can have drastically different responses to shift work depending on their intrinsic circadian and homeostatic parameters.

Adaptation to Shift Work: Physiologically Based Modeling of the Effects of Lighting and Shifts’ Start Time

Science.gov (United States)

Postnova, Svetlana; Robinson, Peter A.; Postnov, Dmitry D.

2013-01-01

Shift work has become an integral part of our life with almost 20% of the population being involved in different shift schedules in developed countries. However, the atypical work times, especially the night shifts, are associated with reduced quality and quantity of sleep that leads to increase of sleepiness often culminating in accidents. It has been demonstrated that shift workers’ sleepiness can be improved by a proper scheduling of light exposure and optimizing shifts timing. Here, an integrated physiologically-based model of sleep-wake cycles is used to predict adaptation to shift work in different light conditions and for different shift start times for a schedule of four consecutive days of work. The integrated model combines a model of the ascending arousal system in the brain that controls the sleep-wake switch and a human circadian pacemaker model. To validate the application of the integrated model and demonstrate its utility, its dynamics are adjusted to achieve a fit to published experimental results showing adaptation of night shift workers (n = 8) in conditions of either bright or regular lighting. Further, the model is used to predict the shift workers’ adaptation to the same shift schedule, but for conditions not considered in the experiment. The model demonstrates that the intensity of shift light can be reduced fourfold from that used in the experiment and still produce good adaptation to night work. The model predicts that sleepiness of the workers during night shifts on a protocol with either bright or regular lighting can be significantly improved by starting the shift earlier in the night, e.g.; at 21∶00 instead of 00∶00. Finally, the study predicts that people of the same chronotype, i.e. with identical sleep times in normal conditions, can have drastically different responses to shift work depending on their intrinsic circadian and homeostatic parameters. PMID:23308206

Changing Incidence and Risk Factors for Kaposi Sarcoma by Time Since Starting Antiretroviral Therapy

DEFF Research Database (Denmark)

Wyss, Natascha; Zwahlen, Marcel; Bohlius, Julia

2016-01-01

BACKGROUND:  Kaposi sarcoma (KS) remains a frequent cancer in human immunodeficiency virus (HIV)-positive patients starting combination antiretroviral therapy (cART). We examined incidence rates and risk factors for developing KS in different periods after starting cART in patients from European...

University Start-ups: A Better Business Model

Science.gov (United States)

Dehn, J.; Webley, P. W.

2015-12-01

Many universities look to start-up companies as a way to attract faculty, supporting research and students as traditional federal sources become harder to come by. University affiliated start-up companies can apply for a broader suite of grants, as well as market their services to a broad customer base. Often university administrators see this as a potential panacea, but national statistics show this is not the case. Rarely do universities profit significantly from their start-ups. With a success rates of around 20%, most start-ups end up costing the university money as well as faculty-time. For the faculty, assuming they want to continue in academia, a start-up is often unattractive because it commonly leads out of academia. Running a successful business as well as maintaining a strong teaching and research load is almost impossible to do at the same time. Most business models and business professionals work outside of academia, and the models taught in business schools do not merge well in a university environment. To mitigate this a new business model is proposed where university start-ups are aligned with the academic and research missions of the university. A university start-up must work within the university, directly support research and students, and the work done maintaining the business be recognized as part of the faculty member's university obligations. This requires a complex conflict of interest management plan and for the companies to be non-profit in order to not jeopardize the university's status. This approach may not work well for all universities, but would be ideal for many to conserve resources and ensure a harmonious relationship with their start-ups and faculty.

Two-Man Bobsled Push Start Analysis

Directory of Open Access Journals (Sweden)

Lopes Alexandre Dias

2016-04-01

Full Text Available The importance of push start times on bobsled performance was evidenced by some studies, but at this moment there is no article to the authors’ knowledge that describes the bobsled push start. Thus, the objectives of this study were to describe the two-man bobsled push start, analyze the differences between teams, and estimate the most important variable analyzed. We hypothesized that the pilot and brakeman athletes’ movement patterns during a bobsled pushing start can be described. The images used in this study were obtained during the men’s two-man XIV World Championship of Bobsled (2004. Fifteen best teams participating in the championship were recorded, and four start runs for each team were analyzed. The videos were captured by two digital video cameras. The pilot athletes were analyzed during the moment that they touched the lateral push bar of the sled, and the brakemen were analyzed during the first take-off and first landing. The teams were pooled in three groups of five teams using the final ranking of pushing time. We concluded that there was a distinct pattern movement for pilots and brakemen. The initial position of the majority of the pilots was localized slightly behind the bar. After touching the lateral bar, the pilots remained in a semi-squat position, pushing the sled forward in a pattern of marching movement. All brakemen used the board attached to the track as a support for both feet at the start. The brakeman gave the greatest contribution to break the inertia of the sled. There was no significant difference of movement between the three groups analyzed for the pilot and the brakeman.

The start of the harvest

CERN Multimedia

2011-01-01

The first major particle physics summer conference has just started this week in Grenoble. After the Quark-Matter conference, the Europhysics Conference on High-Energy Physics marks the start of a promising harvest for the LHC experiments.   For the first time, the collaborations will be presenting their latest results based on all luminosity taken until end of June, which will provide more precise measurements in many areas. Thanks to the excellent performance of the LHC, the experiments have already accumulated a substantial quantity of data allowing them to push back the known limits and refine measurements in many fields ranging from b physics to the search for the Higgs boson and for dark matter. At the time of writing, the LHC collaborations are about to present these new results in an energy range which has never previously been explored. I have congratulated all the teams involved in getting the LHC into operation in record time with great efficiency. Today I would like to acknowledge the...

PF-AR NW14, a new time-resolved diffraction/scattering beamline

Science.gov (United States)

Nozawa, Shunsuke; Adachi, Shin-ichi; Tazaki, Ryoko; Takahashi, Jun-ichi; Itatani, Jiro; Daimon, Masahiro; Mori, Takeharu; Sawa, Hiroshi; Kawata, Hiroshi; Koshihara, Shin-ya

2005-01-01

NW14 is a new insertion device beamline at the Photon Factory Advanced Ring (PF-AR), which is a unique ring with full-time single-bunched operation, aiming for timeresolved x-ray diffraction/scattering and XAFS experiments. The primary scientific goal of this beamline is to observe the ultrafast dynamics of condensed matter systems such as organic and inorganic crystals, biological systems and liquids triggered by optical pulses. With the large photon fluxes derived from the undulator, it should become possible to take a snapshoot an atomic-scale image of the electron density distribution. By combining a series of images it is possible to produce a movie of the photo-induced dynamics with 50-ps resolution. The construction of the beamline is being funded by the ERATO Koshihara Non-equilibrium Dynamics Project of the Japan Science and Technology Agency (JST), and the beamline will be operational from autumn 2005.

PF-AR NW14, a new time-resolved diffraction/scattering beamline

International Nuclear Information System (INIS)

Nozawa, Shunsuke; Adachi, Shin-ichi; Tazaki, Ryoko; Takahashi, Jun-ichi; Itatani, Jiro; Daimon, Masahiro; Mori, Takeharu; Sawa, Hiroshi; Kawata, Hiroshi; Koshihara, Shin-ya

2005-01-01

NW14 is a new insertion device beamline at the Photon Factory Advanced Ring (PF-AR), which is a unique ring with full-time single-bunched operation, aiming for timeresolved x-ray diffraction/scattering and XAFS experiments. The primary scientific goal of this beamline is to observe the ultrafast dynamics of condensed matter systems such as organic and inorganic crystals, biological systems and liquids triggered by optical pulses. With the large photon fluxes derived from the undulator, it should become possible to take a snapshoot an atomic-scale image of the electron density distribution. By combining a series of images it is possible to produce a movie of the photo-induced dynamics with 50-ps resolution. The construction of the beamline is being funded by the ERATO Koshihara Non-equilibrium Dynamics Project of the Japan Science and Technology Agency (JST), and the beamline will be operational from autumn 2005

How to Start Growing Beef Calves on Feed

OpenAIRE

ZoBell, Dale R

2003-01-01

Starting calves on feed takes time and effort because of the stress young calves are susceptible to at this point in their lives. The reduction of stress will result in calves consuming more feed, thus remaining healthier. To successfully start calves on feed, dry matter intake must be maximized while minimizing health problems. The following is a 5-step applied method for starting calves on a silage-based ration.

Paleomagnetism and Anisotropy of Magnetic Susceptibility study of the Miocene Jack Springs Tuff (Nevada, USA)

Science.gov (United States)

Shields, S.; Petronis, M. S.; Pluhar, C. J.; Gordon, L.

2014-12-01

The mid-Miocene Jack Springs Tuff (JST) outcrops across the western Mina Deflection accommodation zone, west-central Nevada and into eastern California. Previously, the source location for the JST was unknown, yet recent studies northwest of Mono Lake, CA have identified a relatively un-rotated structural block in which to reference the paleomagnetic data. Although new studies have indicated that this block may be rotated up to 13º, we argue that the probable source area is located near the Bodie Hills, CA. At this site, the paleomagnetic reference direction is D = 353°, I = 43°, α95 = 7.7° (Carlson et al, 2013). Based on these data, the JST can be used to measure absolute vertical-axis rotation as well as enable reconstruction of the paleo-topography using the corrected anisotropy of magnetic susceptibility (AMS) data. A total of 19 sites were sampled to constrain Cenozoic to recent vertical axis rotation within the region and AMS experiments were conducted to determine the flow direction of the JST. Curie point estimates indicate that the JST ranges in titanium concentration from 0.042 to 1.10, indicating a low to moderate titanomagnetite phase (Akimoto, 1962). Demagnetization experiments reveal mean destructive fields of the NRM ranging between 15mT and 40mT suggesting that both multi-domain to pseudo-single domain grains are the dominant ferromagnetic phases that carry the remanence and AMS fabric. Preliminary paleomagnetic data yield stable single component demagnetization behavior for most sites that, after structural correction, indicate clockwise vertical axis rotation ranging from +20°± 10° to +60°± 11° between multiple fault blocks. The uncorrected AMS data yield oblate magnetic fabrics that can be used to infer the transport direction, source region, and paleovalley geometry of the JST. These data are tentatively interpreted to indicate west to east transport of the JST across the Mono Basin region into the Mina Deflection that was erupted and

A bulk queueing system under N-policy with bilevel service delay discipline and start-up time

Directory of Open Access Journals (Sweden)

David C. R. Muh

1993-01-01

Full Text Available The author studies the queueing process in a single-server, bulk arrival and batch service queueing system with a compound Poisson input, bilevel service delay discipline, start-up time, and a fixed accumulation level with control operating policy. It is assumed that when the queue length falls below a predefined level r(≥1, the system, with server capacity R, immediately stops service until the queue length reaches or exceeds the second predefined accumulation level N(≥r. Two cases, with N≤R and N≥R, are studied.

Development of space simulation / net-laboratory system

Science.gov (United States)

Usui, H.; Matsumoto, H.; Ogino, T.; Fujimoto, M.; Omura, Y.; Okada, M.; Ueda, H. O.; Murata, T.; Kamide, Y.; Shinagawa, H.; Watanabe, S.; Machida, S.; Hada, T.

A research project for the development of space simulation / net-laboratory system was approved by Japan Science and Technology Corporation (JST) in the category of Research and Development for Applying Advanced Computational Science and Technology(ACT-JST) in 2000. This research project, which continues for three years, is a collaboration with an astrophysical simulation group as well as other space simulation groups which use MHD and hybrid models. In this project, we develop a proto type of unique simulation system which enables us to perform simulation runs by providing or selecting plasma parameters through Web-based interface on the internet. We are also developing an on-line database system for space simulation from which we will be able to search and extract various information such as simulation method and program, manuals, and typical simulation results in graphic or ascii format. This unique system will help the simulation beginners to start simulation study without much difficulty or effort, and contribute to the promotion of simulation studies in the STP field. In this presentation, we will report the overview and the current status of the project.

Entering 'A NEW REALM' of KIBO Payload Operations - Continuous efforts for microgravity experiment environment and lessons learned from real time experiment operations in KIBO -

International Nuclear Information System (INIS)

Sakagami, K; Goto, M; Matsumoto, S; Ohkuma, H

2011-01-01

On January 22nd, 2011(JST), KOUNOTORI2 (H-II Transfer Vehicle: HTV2) was successfully launched from Tanegashima Space Center toward the International Space Station (ISS) and two new JAXA payload racks, Kobairo rack and MSPR (Multi-purpose Small Payload Rack) were transferred to ISS/KIBO (Japanese Experiment Module: JEM). In addition to Saibo rack and Ryutai rack which are already in operation in KIBO, in total 4 Japanese experiment payload racks start operations in KIBO. Then KIBO payload operations embark on a new realm, full utilization phase. While the number and variety of microgravity experiments become increasing, simultaneous operation constraints should be considered to achieve multitask payload operations in ISS/KIBO and ever more complicated cooperative operations between crewmember and flight control team/science team are required. Especially for g-jitter improvement in ISS/KIBO, we have greatly advanced cooperative operations with crewmember in the recent increment based on the microgravity data analysis results. In this paper, newly operating Japanese experiment payloads characteristics and some methods to improve g-jitter environment are introduced from the front line of KIBO payload operations.

Ideal Timing of Starting Weight-Bearing After Calcaneal Insufficiency Fracture: A Case Report and Review of the Literature

OpenAIRE

Imamura; Mochizuki; Kawakami; Momohara

2016-01-01

Introduction Criteria for starting weight-bearing on the heel with a symptomatic calcaneal insufficiency fracture have not yet been reported. Case Presentation We describe a rare case of a 52-year-old woman with a calcaneal insufficiency fracture who sustained a second ipsilateral calcaneal insufficiency fracture within a short time span. The initial fracture was not evident radiographically, but was detected using magnetic resona...

Start-up simulations of the PULSAR pulsed tokamak reactor

International Nuclear Information System (INIS)

Werley, K.A.; Bathke, C.G.

1993-01-01

Start-up conditions are examined for a pulsed tokamak reactor that uses only inductively driven plasma current (and bootstrap current). A zero-dimensional (profile-averaged) model containing plasma power and particle balance equations is used to study several aspects of plasma start-up, including: (1) optimization of the start-up pathway; (2) tradeoffs of auxiliary start-up heating power versus start-up time; (3) volt-second consumption; (4) thermal stability of the operating point; (5) estimates of the diverter heat flux and temperature during the start-up transient; (6) the sensitivity of the available operating space to allowed values of the H confinement factor; and (7) partial-power operations

De-escalatory confidence-building measures after START

International Nuclear Information System (INIS)

Stockton, P.N.

1992-01-01

The very notion of examining de-escalatory CBMs in the context of the START negotiations appears odd. Given the immense progress in US-Soviet relations, of which the proposed START agreement is emblematic, the risk of the two nations stumbling to the brink of war seems increasingly remote. Why bother analyzing CBMs designed to help resolve such an improbable event? The obvious answer is that relations between the US and the Soviet Union - or whatever array of nations succeed it - could take an unforeseeable turn for the worse. Once ratified, the START agreement is supposed to remain in force for seven years, more than enough time for political tensions to return with a vengeance. This suggests a more prudent question: if our two nations do stumble to the brink of war, will the START agreement affect the prospect of de-escalatory CBMs? And if the US and Soviet Union pursue deeper force-reductions in a follow-on START II agreement, could that agreement be designed to facilitate more effective de-escalatory measures? This paper sets the stage for addressing such questions by outlining the START agreement and offering a brief overview of how START might affect the prospects for CBMs. Then, after examining some specific CBM proposals in light of START, an analysis will be made of the de-escalatory problems and opportunities that a Start II treaty might create

Start-up procedure

International Nuclear Information System (INIS)

Marchl, A.; Krebs, W.D.; Aleite, W.

1975-01-01

The start-up procedure will be shown on a pressurized water reactor, although most of the activities will occur similarly in other reactor types. The commissioning time can be divided into 5 sections, the phases A to E together lasting 26 months. Subsequently there are a test run of one month and the handling-over of the plant to the operator. A survey of the commissioning sections with several important main events is shown. (orig./TK) [de

Descriptive Analysis on the Impacts of Universal Zero-Markup Drug Policy on a Chinese Urban Tertiary Hospital.

Directory of Open Access Journals (Sweden)

Wei Tian

Full Text Available Universal Zero-Markup Drug Policy (UZMDP mandates no price mark-ups on any drug dispensed by a healthcare institution, and covers the medicines not included in the China's National Essential Medicine System. Five tertiary hospitals in Beijing, China implemented UZMDP in 2012. Its impacts on these hospitals are unknown. We described the effects of UZMDP on a participating hospital, Jishuitan Hospital, Beijing, China (JST.This retrospective longitudinal study examined the hospital-level data of JST and city-level data of tertiary hospitals of Beijing, China (BJT 2009-2015. Rank-sum tests and join-point regression analyses were used to assess absolute changes and differences in trends, respectively.In absolute terms, after the UZDMP implementation, there were increased annual patient-visits and decreased ratios of medicine-to-healthcare-charges (RMOH in JST outpatient and inpatient services; however, in outpatient service, physician work-days decreased and physician-workload and inflation-adjusted per-visit healthcare charges increased, while the inpatient physician work-days increased and inpatient mortality-rate reduced. Interestingly, the decreasing trend in inpatient mortality-rate was neutralized after UZDMP implementation. Compared with BJT and under influence of UZDMP, JST outpatient and inpatient services both had increasing trends in annual patient-visits (annual percentage changes[APC] = 8.1% and 6.5%, respectively and decreasing trends in RMOH (APC = -4.3% and -5.4%, respectively, while JST outpatient services had increasing trend in inflation-adjusted per-visit healthcare charges (APC = 3.4% and JST inpatient service had decreasing trend in inflation-adjusted per-visit medicine-charges (APC = -5.2%.Implementation of UZMDP seems to increase annual patient-visits, reduce RMOH and have different impacts on outpatient and inpatient services in a Chinese urban tertiary hospital.

Descriptive Analysis on the Impacts of Universal Zero-Markup Drug Policy on a Chinese Urban Tertiary Hospital.

Science.gov (United States)

Tian, Wei; Yuan, Jiangfan; Yang, Dong; Zhang, Lanjing

2016-01-01

Universal Zero-Markup Drug Policy (UZMDP) mandates no price mark-ups on any drug dispensed by a healthcare institution, and covers the medicines not included in the China's National Essential Medicine System. Five tertiary hospitals in Beijing, China implemented UZMDP in 2012. Its impacts on these hospitals are unknown. We described the effects of UZMDP on a participating hospital, Jishuitan Hospital, Beijing, China (JST). This retrospective longitudinal study examined the hospital-level data of JST and city-level data of tertiary hospitals of Beijing, China (BJT) 2009-2015. Rank-sum tests and join-point regression analyses were used to assess absolute changes and differences in trends, respectively. In absolute terms, after the UZDMP implementation, there were increased annual patient-visits and decreased ratios of medicine-to-healthcare-charges (RMOH) in JST outpatient and inpatient services; however, in outpatient service, physician work-days decreased and physician-workload and inflation-adjusted per-visit healthcare charges increased, while the inpatient physician work-days increased and inpatient mortality-rate reduced. Interestingly, the decreasing trend in inpatient mortality-rate was neutralized after UZDMP implementation. Compared with BJT and under influence of UZDMP, JST outpatient and inpatient services both had increasing trends in annual patient-visits (annual percentage changes[APC] = 8.1% and 6.5%, respectively) and decreasing trends in RMOH (APC = -4.3% and -5.4%, respectively), while JST outpatient services had increasing trend in inflation-adjusted per-visit healthcare charges (APC = 3.4%) and JST inpatient service had decreasing trend in inflation-adjusted per-visit medicine-charges (APC = -5.2%). Implementation of UZMDP seems to increase annual patient-visits, reduce RMOH and have different impacts on outpatient and inpatient services in a Chinese urban tertiary hospital.

Reviews/Essays: School Start Times and the Sleep-Wake Cycle of Adolescents--A Review and Critical Evaluation of Available Evidence

Science.gov (United States)

Kirby, Matthew; Maggi, Stefania; D'Angiulli, Amedeo

2011-01-01

The authors have integrated the major findings on the sleep-wake cycle and its performance correlates in adolescents. Basic research shows that lack of synchronicity between early school start times and the circadian rhythm of adolescents (and the sleep debt accumulated as a result) involves several cognitive correlates that may harm the academic…

From Head Start to Sure Start: Reflections on Policy Transfer

Science.gov (United States)

Welshman, John

2010-01-01

This article uses the history of debates over the US Head Start programme (1965), Early Head Start (1994) and the UK Sure Start initiative (1998), as a window on to policy transfer. In all the three, the aim was that early intervention could offer a means of boosting children's educational attainment and of countering the wider effects of poverty…

Considerations in the rationale, design and methods of the Strategic Timing of AntiRetroviral Treatment (START) study

Science.gov (United States)

Babiker, Abdel G; Emery, Sean; Fätkenheuer, Gerd; Gordin, Fred M; Grund, Birgit; Lundgren, Jens D; Neaton, James D; Pett, Sarah L; Phillips, Andrew; Touloumi, Giota; Vjecha, Michael J

2012-01-01

Background Untreated human immunodeficiency virus (HIV) infection is characterized by progressive depletion of CD4+ T lymphocyte (CD4) count leading to the development of opportunistic diseases (acquired immunodeficiency syndrome (AIDS)), and more recent data suggest that HIV is also associated with an increased risk of serious non-AIDS (SNA) diseases including cardiovascular, renal, and liver diseases and non-AIDS-defining cancers. Although combination antiretroviral treatment (ART) has resulted in a substantial decrease in morbidity and mortality in persons with HIV infection, viral eradication is not feasible with currently available drugs. The optimal time to start ART for asymptomatic HIV infection is controversial and remains one of the key unanswered questions in the clinical management of HIV-infected individuals. Purpose In this article, we outline the rationale and methods of the Strategic Timing of AntiRetroviral Treatment (START) study, an ongoing multicenter international trial designed to assess the risks and benefits of initiating ART earlier than is currently practiced. We also describe some of the challenges encountered in the design and implementation of the study and how these challenges were addressed. Methods A total of 4000 study participants who are HIV type 1 (HIV-1) infected, ART naïve with CD4 count > 500 cells/μL are to be randomly allocated in a 1:1 ratio to start ART immediately (early ART) or defer treatment until CD4 count is AIDS, SNA, or death. The study had a pilot phase to establish feasibility of accrual, which was set as the enrollment of at least 900 participants in the first year. Results Challenges encountered in the design and implementation of the study included the limited amount of data on the risk of a major component of the primary endpoint (SNA) in the study population, changes in treatment guidelines when the pilot phase was well underway, and the complexities of conducting the trial in a geographically wide

Mortality According to CD4 Count at Start of Combination Antiretroviral Therapy Among HIV-infected Patients Followed for up to 15 Years After Start of Treatment

DEFF Research Database (Denmark)

May, Margaret T; Vehreschild, Jorg-Janne; Trickey, Adam

2016-01-01

BACKGROUND: CD4 count at start of combination antiretroviral therapy (ART) is strongly associated with short-term survival, but its association with longer-term survival is less well characterized. METHODS: We estimated mortality rates (MRs) by time since start of ART (...-4.9, 5-9.9, and ≥10 years) among patients from 18 European and North American cohorts who started ART during 1996-2001. Piecewise exponential models stratified by cohort were used to estimate crude and adjusted (for sex, age, transmission risk, period of starting ART [1996-1997, 1998-1999, 2000......-2001], and AIDS and human immunodeficiency virus type 1 RNA at baseline) mortality rate ratios (MRRs) by CD4 count at start of ART (0-49, 50-99, 100-199, 200-349, 350-499, ≥500 cells/µL) overall and separately according to time since start of ART. RESULTS: A total of 6344 of 37 496 patients died during 359 219...

A chronotype comparison of South African and Dutch marathon runners: the role of scheduled race start times and effects on performance

NARCIS (Netherlands)

Henst, R.; Jaspers, R.T.; Roden, L.; Rae, D.

2015-01-01

Recently, a high prevalence of morning-types was reported among trained South African endurance athletes. Proposed explanations for this observation were that either the chronotype of these athletes is better suited to coping with the early-morning start times of endurance events in South Africa; or

Mitigation of global warming and the role of identification of greenhouse gas sources

International Nuclear Information System (INIS)

Kaya, Y.

2002-01-01

Japan Science and Technology Corporation (JST) is an organization supporting R and D of frontier science and technologies under the full sponsorship of the government of Japan. Under the umbrella of JST the author is in charge of a program called 'Environment friendly social systems' which includes more than 20 research projects for better environment (with as an average of 1 million US dollars per project per year). One of the projects in this program is on development of isotopomer technology and its use in identifying greenhouse gas (GHG) sources headed by Prof. N.Yoshida. JST earnestly hopes that it can contribute as much as possible to mitigation of global warming through the support of important research projects such as Yoshida's. (author)

A chronotype comparison of South African and Dutch marathon runners: The role of scheduled race start times and effects on performance.

Science.gov (United States)

Henst, Rob H P; Jaspers, Richard T; Roden, Laura C; Rae, Dale E

2015-01-01

Recently, a high prevalence of morning-types was reported among trained South African endurance athletes. Proposed explanations for this observation were that either the chronotype of these athletes is better suited to coping with the early-morning start times of endurance events in South Africa; or habitual early waking for training or endurance events may have conditioned the athletes to adapt and become morning-types. The South African endurance athletes also had earlier chronotypes compared to a control population of less active individuals, suggesting that individuals who are more physically active may have earlier chronotypes. However, since both the South African athlete and control groups showed an overrepresentation of morning-types compared to European and American populations, the South African climate may in part have explained this bias towards morningness. Given the latitude and climate differences between South Africa and the Netherlands, and that South African marathons typically start at about 06:30 while those in the Netherlands start later (±11:00), comparison of South African and Dutch marathon runners and active controls would allow for simultaneous assessment of the effects of marathon start time, degree of physical activity and climate on chronotype. Therefore, the primary aims of this study were: (i) to assess the effect of marathon start time on chronotype in marathon runners and (ii) to determine the extent to which either degree of physical activity or climate might explain the bias towards morningness observed in South African athletes and controls. A secondary aim was to determine whether any relationships exist between chronotype, PERIOD3 (PER3) variable number tandem repeat (VNTR) polymorphism genotype, habitual training habits and marathon performance. Trained male marathon runners from South Africa (n = 95) and the Netherlands (n = 90), and active but non-competitive male controls from South Africa (n = 97) and the

A Healthy Start Can Begin Now

Science.gov (United States)

A healthy pregnancy begins before you ever become pregnant. Give yourself the best chance for a healthy pregnancy and healthy baby before you start down the road to motherhood. If you smoke, now’s a great time to quit.

Backstroke start kinematic and kinetic changes due to different feet positioning.

Science.gov (United States)

de Jesus, Karla; de Jesus, Kelly; Figueiredo, Pedro; Gonçalves, Pedro; Pereira, Suzana Matheus; Vilas-Boas, João Paulo; Fernandes, Ricardo Jorge

2013-01-01

The backstroke swimming start international rules changed in 2005. This study compared two backstroke start variants, both with feet parallel to each other but in complete immersion and emersion. Six elite swimmers performed two sets of 4 maximal 15 m bouts, each set using one of the variants. The starts were videotaped in the sagittal plane with two cameras, providing bi-dimensional dual-media kinematic evaluation, and an underwater force plate and a handgrip instrumented with a load cell collected kinetic data. Backstroke start with feet immerged displayed greater centre-of-mass horizontal starting position, centre-of-mass horizontal velocity at hands-off and take-off angle. Backstroke start with feet emerged showed greater wall contact time, centre-of-mass horizontal and downward vertical velocity at take-off, lower limbs horizontal impulse, and centre-of-mass downward vertical velocity during flight phase. Backstroke start with feet immerged and emerged displayed similar centre-of-mass horizontal water reach, back arc angle and 5 m starting time. Irrespective of the swimmer's feet positioning, coaches should emphasise each variant's mechanical advantages during the wall contact phases. Furthermore, the maintenance of those advantages throughout the flight should be stressed for better backstroke start performance.

Multi-Objective Optimization of Start-up Strategy for Pumped Storage Units

Directory of Open Access Journals (Sweden)

Jinjiao Hou

2018-05-01

Full Text Available This paper proposes a multi-objective optimization method for the start-up strategy of pumped storage units (PSU for the first time. In the multi-objective optimization method, the speed rise time and the overshoot during the process of the start-up are taken as the objectives. A precise simulation platform is built for simulating the transient process of start-up, and for calculating the objectives based on the process. The Multi-objective Particle Swarm Optimization algorithm (MOPSO is adopted to optimize the widely applied start-up strategies based on one-stage direct guide vane control (DGVC, and two-stage DGVC. Based on the Pareto Front obtained, a multi-objective decision-making method based on the relative objective proximity is used to sort the solutions in the Pareto Front. Start-up strategy optimization for a PSU of a pumped storage power station in Jiangxi Province in China is conducted in experiments. The results show that: (1 compared with the single objective optimization, the proposed multi-objective optimization of start-up strategy not only greatly shortens the speed rise time and the speed overshoot, but also makes the speed curve quickly stabilize; (2 multi-objective optimization of strategy based on two-stage DGVC achieves better solution for a quick and smooth start-up of PSU than that of the strategy based on one-stage DGVC.

Development of charge structure in a short live convective cell observed by a 3D lightning mapper and a phased array radar

Science.gov (United States)

Yoshida, S.; Adachi, T.; Kusunoki, K.; Wu, T.; Ushio, T.; Yoshikawa, E.

2015-12-01

Thunderstorm observation has been conducted in Osaka, Japan, with a use of a 3D lightning mapper, called Broadband Observation network for Lightning and Thunderstorm (BOLT), and an X-band phased array radar (PAR). BOLT is a LF sensor network that receives LF emission associated with lightning discharges and locates LF radiation sources in 3D. PAR employs mechanical and electrical scans, respectively, in azimuthal and elevation direction, succeeding in quite high volume scan rate. In this presentation, we focus on lightning activity and charge structure in convective cells that lasted only short time (15 minutes or so). Thunderstorms that consisted of several convective cells developed near the radar site. Precipitation structure of a convective cell in the thunderstorm was clearly observed by PAR. A reflectivity core of the convective cell appeared at an altitude of 6 km at 2245 (JST). After that the core descended and reached the ground at 2256 (JST), resulting in heavy precipitation on surface. The echo top height (30dBZ) increased intermittently between 2245 (JST) and 2253 (JST) and it reached at the altitude of 12 km. The convective cell dissipated at 2300. Many intra-cloud (IC) flashes were initiated within the convective cell. Most IC flashes that were initiated in the convective cell occurred during the time when the echo top height increased, while a few IC flashes were initiated in the convective cell after the cease of the echo top vertical development. These facts indicate that strong updraft at upper levels (about 8 km or higher) plays an important role on thunderstorm electrification for IC flashes. Moreover, initiation altitudes of the IC flashes and the positive charge regions removed by the IC flashes increased, as the echo top height increased. This fact implies that the strong updraft at the upper levels blew up positively-charged ice pellets and negatively-charged graupel, and lifted IC flash initiation altitudes and positive charge regions

Time dependent start-up thermal analysis of a Super Fast Reactor

Energy Technology Data Exchange (ETDEWEB)

Sutanto,, E-mail: sutanto@fuji.waseda.jp; Oka, Yoshiaki

2013-10-15

Highlights: • Time dependent startup thermal analysis of a Super Fast Reactor is performed. • A recirculation system is used for pressurization and for generating supercritical steam. • MCST satisfies the criterion both during subcritical pressure and during power-raising. • MCST is not sensitive to the change of inlet temperature, gap volume and flow rate because of high flow to power ratio. • CHF is not limiting the MCST during subcritical pressure due to large margin of heat flux. -- Abstract: The startup system of a supercritical pressure light water cooled fast reactor (Super FR) is studied by time dependent thermal-hydraulic analysis. The plant analysis code is developed based on an innovative upward flow pattern in all the assemblies of the Super FR. A recirculation system consisting of a steam drum, a circulation pump, and a heat exchanger is used for the startup. Detailed procedures are performed and the maximum cladding surface temperature (MCST) at rated power, 640 °C, is used as the criterion. Firstly a small constant nuclear power is used for rising the core feed water temperature to be 280 °C through the recirculation system. Secondly, pressurization is done in the recirculation system from atmospheric to operating pressure, 25 MPa, by raising the power. Thirdly, line-switching from recirculation mode to once-through direct-cycle is performed while turbines are started by supercritical steam at supercritical pressure. Finally the power is raised to be 100% of power followed by raising the flow rate. During pressurization the heat flux margin is large due to low power used for pressurization and the MCST is much lower than the criterion. The MCST is not sensitive to the inlet temperature, the flow rate, and the gap volume of the core because of high flow to power ratio. Smaller dimension of steam drum can be used for pressurization stably. The MCST satisfies the criterion both during subcritical pressure and during power-raising.

Time dependent start-up thermal analysis of a Super Fast Reactor

International Nuclear Information System (INIS)

Sutanto,; Oka, Yoshiaki

2013-01-01

Highlights: • Time dependent startup thermal analysis of a Super Fast Reactor is performed. • A recirculation system is used for pressurization and for generating supercritical steam. • MCST satisfies the criterion both during subcritical pressure and during power-raising. • MCST is not sensitive to the change of inlet temperature, gap volume and flow rate because of high flow to power ratio. • CHF is not limiting the MCST during subcritical pressure due to large margin of heat flux. -- Abstract: The startup system of a supercritical pressure light water cooled fast reactor (Super FR) is studied by time dependent thermal-hydraulic analysis. The plant analysis code is developed based on an innovative upward flow pattern in all the assemblies of the Super FR. A recirculation system consisting of a steam drum, a circulation pump, and a heat exchanger is used for the startup. Detailed procedures are performed and the maximum cladding surface temperature (MCST) at rated power, 640 °C, is used as the criterion. Firstly a small constant nuclear power is used for rising the core feed water temperature to be 280 °C through the recirculation system. Secondly, pressurization is done in the recirculation system from atmospheric to operating pressure, 25 MPa, by raising the power. Thirdly, line-switching from recirculation mode to once-through direct-cycle is performed while turbines are started by supercritical steam at supercritical pressure. Finally the power is raised to be 100% of power followed by raising the flow rate. During pressurization the heat flux margin is large due to low power used for pressurization and the MCST is much lower than the criterion. The MCST is not sensitive to the inlet temperature, the flow rate, and the gap volume of the core because of high flow to power ratio. Smaller dimension of steam drum can be used for pressurization stably. The MCST satisfies the criterion both during subcritical pressure and during power-raising

LHC Report: Rocky re-start

CERN Multimedia

Barbara Holzer for the LHC Team

2012-01-01

A rocky re-start with beam followed a successful machine development period and the first technical stop of 2012. Today, Friday 11 May, the machine began running again with 1380 bunches.   A short, two-day machine development period was successfully completed on 21-22 April. It focused on topics relevant for the 2012 physics beam operation. This was then followed by a five-day technical stop, the first of the year. The technical stop finished on time on Friday 26 April. The re-start with beam was somewhat tortuous and hampered by an unlucky succession of technical faults leading to extended periods of downtime. The planned intensity increase was put on hold for three days with the machine operating with 1092 bunches and a moderate bunch intensity of 1.3x1011 protons. This delivered a reasonable peak luminosity of 3.6x1033 cm-2s-1 to ATLAS and CMS. Higher than usual beam losses were observed in the ramp and squeeze, and time was required to investigate the causes and to implement mitigati...

Getting started with Simulink

CERN Document Server

Zamboni, Luca

2013-01-01

This practical and easy-to-understand learning tutorial is one big exciting exercise for students and engineers that are always short on their schedules and want to regain some lost time with the help of Simulink.This book is aimed at students and engineers who need a quick start with Simulink. Though it's not required in order to understand how Simulink works, knowledge of physics will help the reader to understand the exercises described.

Dynamics and Control During Start-Up of Energy Integrated Distillation Column

DEFF Research Database (Denmark)

of the inherent effects of process integration upon a start-up procedure. In particular the effect of energy recycle upon the possible start-up sequence, and the effect of using an actuator for control purposes, i.e. the heat pump, which in itself requires significant start-up time. The experimental application...

Comparison of outcomes between emergent-start and planned-start peritoneal dialysis in incident ESRD patients: a prospective observational study.

Science.gov (United States)

Li, Wen-Yi; Wang, Yi-Cheng; Hwang, Shang-Jyh; Lin, Shih-Hua; Wu, Kwan-Dun; Chen, Yung-Ming

2017-12-11

and cost concerns, such practice of PD initiation would better be replaced with a planned-start mode by employing more effective predialysis therapeutic education and timely catheter placement.

Dynamics and Control During Start-up of Energy Integrated Distillation Column

DEFF Research Database (Denmark)

Eden, Mario Richard; Koggersbøl, Arne; Hallager, L.

2000-01-01

of the inherent effects of process integration upon a start-up procedure. In particular the effect of energy recycle upon the possible start-up sequence, and the effect of using an actuator f or control purposes, i.e. the heat pump, which in itself requires significant start-up time. The experimental application...

Lean start-up

DEFF Research Database (Denmark)

Rasmussen, Erik Stavnsager; Tanev, Stoyan

2016-01-01

The risk of launching new products and starting new firms is known to be extremely high. The Lean Start-up approach is a way of reducing these risks and enhancing the chances for success by validating the products and services in the market with customers before launching it in full scale. The ma...... and the final business model. In other words: The start-up must first nail the problem together with the customers, then develop the solution and test, and then in the end scale it to a full-grown business model.......The risk of launching new products and starting new firms is known to be extremely high. The Lean Start-up approach is a way of reducing these risks and enhancing the chances for success by validating the products and services in the market with customers before launching it in full scale. The main...

From START to NEW START. The dilemma and future of nuclear disarmament; Von START zu NEW START. Das Dilemma und die Zukunft der Nuklearen Abruestung

Energy Technology Data Exchange (ETDEWEB)

Plettenberg, Lars

2012-07-01

The report describes the existing four agreements on nuclear disarmament: START I (1991). START II (1993), SORT (2002) and NEW START (2010). The chapter on the dependence between nuclear disarmament and strategic stability covers the issues mutual assured destruction (MAD), credibility, overkill capacity; the role of nuclear weapons in the national strategies of the USA and NATO, Russia, Great Britain, France, China and the other nuclear states. Ways out of MAD include disarmament, de-alerting and mutual assured protection (MAP).

ECRH-assisted start-up in ITER

International Nuclear Information System (INIS)

Lloyd, B.; Carolan, P.G.; Warrick, C.D.

1996-07-01

In ITER, the electric field applied for ionisation and to ramp up the plasma current may be limited to ∼ 0.3 V/m. In this case, based on established theories of the avalanche process, it is shown that ohmic breakdown in ITER is only possible over a narrow range of pressure and magnetic error field. Therefore, ECRH may be necessary to provide robust and reliable start-up. ECRH can ensure prompt breakdown over a wide range of prefill pressure and error field and can also give control over the initial time and location of breakdown. For ECRH-assisted start-up in ITER, the power and pulse length requirements are essentially determined by the need to ensure burnthrough, i.e. complete ionisation of hydrogen and the transition to high ionisation states of impurities. A 0-D code (with inclusion of some 1-D effects) has been developed to analyse burnthrough in ITER. The 0-D simulations indicate that control of the deuterium density is the key factor for ensuring successful start-up in ITER, where the effects of neutral screening and dynamic fuelling by the ex-plasma volume are also crucial. It is concluded that without ECRH, successful start-up will only be possible over a very restricted range of parameters but 3MW of absorbed ECRH power will ensure reasonably robust start-up for a broad range of conditions with beryllium impurity. In the case of carbon impurity, even with an absorbed ECRH power of 5MW one may be restricted to low prefill pressure and/or low carbon concentration for successful start-up. (Author)

Getting started in ZBrush an introduction to digital sculpting and illustration

CERN Document Server

Johnson, Greg

2014-01-01

Getting Started in ZBrush is a gentle introduction to ZBrush, today's premier digital sculpting program. Beginning with the fundamentals of digital sculpting as well as a thorough introduction to the user interface, Getting Started in ZBrush will have you creating a variety of professional-level 3D models in no-time. More than just another button-pushing manual, this comprehensive guide is packed with start-to-finish projects that ease you into the workflow of the program, while at the same time providing tips and tricks that will allow you to achieve certain tasks much more quickly. After pro

Serum Albumin as a Prognostic Marker for Serious Non-AIDS Endpoints in the Strategic Timing of Antiretroviral Treatment (START) Study

DEFF Research Database (Denmark)

Ronit, Andreas; Sharma, Shweta; Baker, Jason V

2018-01-01

of Antiretroviral Treatment (START) study (NCT00867048) with serum albumin as a fixed and time-updated predictor. Models with exclusion of events during initial follow-up years were built to assess the ability of serum albumin to predict beyond shorter periods of time. Secondarily, we considered hospitalizations...... of serious non-AIDS events (hazard ratio, 0.37 [95% confidence interval, .20-.71]; P = .002). Similar results were obtained in a time-updated model, after controlling for interleukin 6, and after excluding initial follow-up years. Serum albumin was independently associated with hospitalization......Background: Serum albumin may be used to stratify human immunodeficiency virus (HIV)-infected persons with high CD4 count according to their risk of serious non-AIDS endpoints. Methods: Cox proportional hazards models were used to analyze the risk of serious non-AIDS events in the Strategic Timing...

Considerations in the rationale, design and methods of the Strategic Timing of AntiRetroviral Treatment (START) study

DEFF Research Database (Denmark)

Babiker, Abdel G; Emery, Sean; Fätkenheuer, Gerd

2013-01-01

Untreated human immunodeficiency virus (HIV) infection is characterized by progressive depletion of CD4+ T lymphocyte (CD4) count leading to the development of opportunistic diseases (acquired immunodeficiency syndrome (AIDS)), and more recent data suggest that HIV is also associated with an incr...... is not feasible with currently available drugs. The optimal time to start ART for asymptomatic HIV infection is controversial and remains one of the key unanswered questions in the clinical management of HIV-infected individuals.......Untreated human immunodeficiency virus (HIV) infection is characterized by progressive depletion of CD4+ T lymphocyte (CD4) count leading to the development of opportunistic diseases (acquired immunodeficiency syndrome (AIDS)), and more recent data suggest that HIV is also associated...

Stop and Restart Effects on Modern Vehicle Starting System Components

Energy Technology Data Exchange (ETDEWEB)

Windover, Paul R. [Argonne National Lab. (ANL), Argonne, IL (United States); Owens, Russell J. [Argonne National Lab. (ANL), Argonne, IL (United States); Levinson, Terry M. [Argonne National Lab. (ANL), Argonne, IL (United States); Laughlin, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Gaines, Linda [Argonne National Lab. (ANL), Argonne, IL (United States)

2015-01-01

Many drivers of personal and commercial vehicles believe that turning the vehicle off and on frequently instead of idling will cause premature wear of the starter system (starter motor and starter battery). As a result, they are concerned that the replacement cost of the starter motor and/or battery due to increased manual engine cycling would be more than the cumulative cost of the fuel saved by not idling unnecessarily. A number of variables play a role in addressing this complex concern, including the number of starting cycles per day, the time between starting cycles, the intended design life of the starting system, the amount of fuel used to restart an engine, and the cumulative cost of the saved fuel. Qualitative and quantitative information from a variety of sources was used to develop a life-cycle economic model to evaluate the cost and quantify the realistic factors that are related to the permissible frequency of starter motor cycles for the average vehicle to economically minimize engine idle time. Annual cost savings can be calculated depending on shutdown duration and the number of shutdown cycles per day. Analysis shows that cost savings are realized by eliminating idling exceeding one minute by shutting down the engine and restarting it. For a typical motorist, the damage to starting system components resulting from additional daily start cycles will be negligible. Overall, it was found that starter life is mostly dependent on the total number of start cycles, while battery life is more dependent on ensuring a full charge between start events.

Cold starting characteristics analysis of hydraulic free piston engine

International Nuclear Information System (INIS)

Zhang, Shuanlu; Zhao, Zhenfeng; Zhao, Changlu; Zhang, Fujun; Wang, Shan

2017-01-01

The cold start characteristic of hydraulic free piston diesel engine may affect its stable operation. Therefore the specific cold start characteristics, such as BDC or TDC positions, pressure in-cylinder, heat release rate, should be investigated in detail. These parameters fluctuate in some regularity in the cod start process. With the development of the free piston engine prototype and the establishment of test bench, the results are obtained. For the dynamic results, the fluctuation range of TDC and BDC positions is 8 mm and decreases with time. The thermodynamic results show that the combustion process is not stable and the pressure in-cylinder fluctuates largely in the cold start process. In addition, the combustion is rapid and knock happens inevitably. In order to investigate the reasons, a CFD model is established for temperature analysis in-cylinder and heat transfer conditions. It is found that higher start wall temperature will lead to more uniform temperature distribution. The delay period may decreases and heat release will move forward. This reason is analyzed by thermodynamic derivation based on the first law of thermodynamics. Finally, the improvement suggestions of cold start strategy are proposed. - Highlights: • The cold start behaviors of HFPE are investigated in detail. • CFD method is used for simulating temperature distribution in start process. • Thermodynamic derivation uncovers the compression temperature distribution. • The improvement suggestions of cold start strategy are proposed.

Engine-start Control Strategy of P2 Parallel Hybrid Electric Vehicle

Science.gov (United States)

Xiangyang, Xu; Siqi, Zhao; Peng, Dong

2017-12-01

A smooth and fast engine-start process is important to parallel hybrid electric vehicles with an electric motor mounted in front of the transmission. However, there are some challenges during the engine-start control. Firstly, the electric motor must simultaneously provide a stable driving torque to ensure the drivability and a compensative torque to drag the engine before ignition. Secondly, engine-start time is a trade-off control objective because both fast start and smooth start have to be considered. To solve these problems, this paper first analyzed the resistance of the engine start process, and established a physic model in MATLAB/Simulink. Then a model-based coordinated control strategy among engine, motor and clutch was developed. Two basic control strategy during fast start and smooth start process were studied. Simulation results showed that the control objectives were realized by applying given control strategies, which can meet different requirement from the driver.

76 FR 37174 - Capital Investment Program-New Starts and Small Starts Program Funds

Science.gov (United States)

2011-06-24

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Capital Investment Program--New Starts... apportionment of the FY 2011 Capital Investment (New Starts and Small Starts) program funds. The funds will be... FY 2011, $1,596,800,000 was appropriated for the Capital Investments Grant Account, which includes...

The backstroke swimming start: state of the art.

Science.gov (United States)

de Jesus, Karla; de Jesus, Kelly; Fernandes, Ricardo J; Vilas-Boas, João Paulo; Sanders, Ross

2014-09-29

As sprint swimming events can be decided by margins as small as .01 s, thus, an effective start is essential. This study reviews and discusses the 'state of the art' literature regarding backstroke start biomechanics from 23 documents. These included two swimming specific publications, eight peer-reviewed journal articles, three from the Biomechanics and Medicine in Swimming Congress series, eight from the International Society of Biomechanics in Sports Conference Proceedings, one from a Biomechanics Congress and one academic (PhD) thesis. The studies had diverse aims, including swimmers' proficiency levels and data collection settings. There was no single consensus for defining phase descriptions; and kinematics, kinetics and EMG approaches were implemented in laboratory settings. However, researchers face great challenges in improving methods of quantifying valid, reliable and accurate data between laboratory and competition conditions. For example, starting time was defined from the starting signal to distances as disparate as ∼5 m to 22.86 m in several studies. Due to recent rule changes, some of the research outcomes now refer to obsolete backstroke start techniques, and only a few studies considered the actual international rules. This literature review indicated that further research is required, in both laboratory and competition settings focusing on the combined influences of the current rules and block configuration on backstroke starting performances.

Exhaust Emission Characteristics of Heavy Duty Diesel Engine During Cold and Warm Start

Directory of Open Access Journals (Sweden)

YANG Rong

2014-07-01

Full Text Available Through experiment conducted on a six cylinder direct injection diesel engine with SCR catalyst, effects of coolant temperature on rail pressure, injection quantity, excess air coefficient and emissions characteristics during cold and warm start were investigated. The results showed that, the maximum injection quantity during a starting event was several times higher than idling operation mode, so was the maximal opacity in the cold and warm starting process. When coolant temperature rose up to above 20℃, NOX emissions in the starting process exhibited peculiar rise which was times higher than idling mode. Compared with engine warm start, rail pressure, cycle fuel quantity, opacity, CO and HC emissions during engine cold start were higher in the course from their transient maximal values towards stabilized idling status. NOX in the same transient course, however, were lower in cold start. As coolant temperature rose, the maximal and the idling value of rail pressure and cycle fuel injection quantity during diesel engine starting process decreased gradually, the excess air coefficient increased to a certain degree, and the maximal and idling values of NOX increased gradually.

Improvement in motor performance during high pressure pump starting at NDDP, Kalpakkam

International Nuclear Information System (INIS)

Nagaraj, R.; Murugan, V.; Thalor, K.L.; Saxena, A.K.; Dangore, A.Y.; Prabhakar, S.; Tiwari, P.K.

2007-01-01

The major energy requirement required for a Sea Water Reverse Osmosis is in the form of Electrical Energy. The primary energy requirement in the process is the electrical energy fed to High Pressure Pumps to pressurize the feed sea water to membranes. This High pressure pump being a high inertia load requires very high torque at the time of starting. This high starting torque requirement results in increased acceleration time of the motor which subsequently increases the strain on the upstream electrical system from motor feeder to transformer. Such starting characteristic necessitates provision of special starting scheme for the high pressure pump motors. Sea water reverse osmosis (SWRO) plant of Nuclear Desalination Demonstration Project (NDDP) was commissioned in October 2002 at Kalpakkam, India. This paper presents the experiences of problems faced due to the typical starting characteristics of High Pressure pumps and provision of series reactor type motor starter for the same. (author)

Getting started with ownCloud

CERN Document Server

Patawari, Aditya

2013-01-01

This is a standard, precise, and short tutorial for setting up ownCloud and includes advanced topics like encryption, user management, and server security. This ownCloud book would be an ideal starting point for anyone who wants to store their data and also share it.This book is for first time users as well as administrators who are interested or responsible for managing an ownCloud instance. You do not need any prior experience with any of the technology, including Linux/Windows, Apache/IIS, SQLite/MySQL, or even PHP. It is a beginner-friendly book, written with a first time user in mind.

From START to NEW START. The dilemma and future of nuclear disarmament

International Nuclear Information System (INIS)

Plettenberg, Lars

2012-01-01

The report describes the existing four agreements on nuclear disarmament: START I (1991). START II (1993), SORT (2002) and NEW START (2010). The chapter on the dependence between nuclear disarmament and strategic stability covers the issues mutual assured destruction (MAD), credibility, overkill capacity; the role of nuclear weapons in the national strategies of the USA and NATO, Russia, Great Britain, France, China and the other nuclear states. Ways out of MAD include disarmament, de-alerting and mutual assured protection (MAP).

Modelling and Predicting Backstroke Start Performance Using Non-Linear and Linear Models.

Science.gov (United States)

de Jesus, Karla; Ayala, Helon V H; de Jesus, Kelly; Coelho, Leandro Dos S; Medeiros, Alexandre I A; Abraldes, José A; Vaz, Mário A P; Fernandes, Ricardo J; Vilas-Boas, João Paulo

2018-03-01

Our aim was to compare non-linear and linear mathematical model responses for backstroke start performance prediction. Ten swimmers randomly completed eight 15 m backstroke starts with feet over the wedge, four with hands on the highest horizontal and four on the vertical handgrip. Swimmers were videotaped using a dual media camera set-up, with the starts being performed over an instrumented block with four force plates. Artificial neural networks were applied to predict 5 m start time using kinematic and kinetic variables and to determine the accuracy of the mean absolute percentage error. Artificial neural networks predicted start time more robustly than the linear model with respect to changing training to the validation dataset for the vertical handgrip (3.95 ± 1.67 vs. 5.92 ± 3.27%). Artificial neural networks obtained a smaller mean absolute percentage error than the linear model in the horizontal (0.43 ± 0.19 vs. 0.98 ± 0.19%) and vertical handgrip (0.45 ± 0.19 vs. 1.38 ± 0.30%) using all input data. The best artificial neural network validation revealed a smaller mean absolute error than the linear model for the horizontal (0.007 vs. 0.04 s) and vertical handgrip (0.01 vs. 0.03 s). Artificial neural networks should be used for backstroke 5 m start time prediction due to the quite small differences among the elite level performances.

Perbandingan Kinerja Deteksi Multiuser Linier Dan Deteksi Multiuser Dengan Jaringan Syaraf Tiruan Pada Sistem DS-CDMA

Directory of Open Access Journals (Sweden)

Popy Maria

2016-03-01

Full Text Available Beberapa hal yang dapat menurunkan kapasitas dan kualitas sinyal informasi yang diterima pada sistem DS-CDMA (Direct Sequence Code Division Multiple Access adalah interferensi, noise dan efek near-far. Pada umumnya efek near-far diatasi dengan menggunakan power control. Namun demikian power control tidak dapat mengatasi interferensi yang disebabkan oleh user lain pada kanal yang sama atau yang lebih dikenal dengan MAI (Multiple Access Interference. Pendekatan lain yang digunakan untuk mengatasi hal ini adalah dengan deteksi multiuser (MUD. Pada tugas akhir ini akan dibandingkan kinerja dari MUD linier yang terdiri dari decorrelating dan MMSE dengan MUD yang menggunakan jaringan syaraf tiruan (JST dan mengacu pada deteksi konvensional. Jaringan syaraf tiruan ini menggunakan algoritma propagasi balik. Deteksi multiuser ini diaplikasikan pada  output deteksi konvensional. Kinerja dari masing-masing detektor dilihat dari BER sebagai fungsi nilai SNR  atau jumlah user pada kanal AWGN dan Rayleigh fading. Hasil simulasi pada  kanal AWGN, menunjukkan bahwa MUD dengan JST mempunyai kinerja yang lebih baik. Untuk target BER 10-3 pada kanal  AWGN, MUD decorrelating mencapainya pada SNR 6.3 dB, MUD MMSE pada SNR 5.97 dB, dan MUD dengan JST pada SNR 5.89 dB sedangkan pada kanal Rayleigh, MUD decorrelating mencapainya pada SNR 11.74 dB, MUD MMSE pada SNR 10.91 dB, dan MUD dengan JST pada SNR 10.31 dB

Getting Started with Processing

CERN Document Server

Reas, Casey

2010-01-01

Learn computer programming the easy way with Processing, a simple language that lets you use code to create drawings, animation, and interactive graphics. Programming courses usually start with theory, but this book lets you jump right into creative and fun projects. It's ideal for anyone who wants to learn basic programming, and serves as a simple introduction to graphics for people with some programming skills. Written by the founders of Processing, this book takes you through the learning process one step at a time to help you grasp core programming concepts. You'll learn how to sketch wi

Automatic start-up system of nuclear reactor based on sequence control technology

International Nuclear Information System (INIS)

Zhang Yao; Zhang Dafa; Peng Huaqing

2009-01-01

A conceptive design of an automatic start-up system based on the sequence control for the nuclear reactors is given in this paper, so as to solve the problems during the start-up process, such as the long operation time, low automatic control level and high accident rate. The start-up process and its requirements are analyzed in detail at first. Then,the principle, the architecture, the key technologies of the automatic start-up system of nuclear reactors are designed and discussed. With the designed system, the automatic start-up of the nuclear reactor can be realized,the work load of the operator can be reduced,and the safety and efficiency of the nuclear power plant during its start-up can be improved. (authors)

Development of a high-throughput real time PCR based on a hot-start alternative for Pfu mediated by quantum dots

Science.gov (United States)

Sang, Fuming; Yang, Yang; Yuan, Lin; Ren, Jicun; Zhang, Zhizhou

2015-09-01

Hot start (HS) PCR is an excellent alternative for high-throughput real time PCR due to its ability to prevent nonspecific amplification at low temperature. Development of a cost-effective and simple HS PCR technique to guarantee high-throughput PCR specificity and consistency still remains a great challenge. In this study, we systematically investigated the HS characteristics of QDs triggered in real time PCR with EvaGreen and SYBR Green I dyes by the analysis of amplification curves, standard curves and melting curves. Two different kinds of DNA polymerases, Pfu and Taq, were employed. Here we showed that high specificity and efficiency of real time PCR were obtained in a plasmid DNA and an error-prone two-round PCR assay using QD-based HS PCR, even after an hour preincubation at 50 °C before real time PCR. Moreover, the results obtained by QD-based HS PCR were comparable to a commercial Taq antibody DNA polymerase. However, no obvious HS effect of QDs was found in real time PCR using Taq DNA polymerase. The findings of this study demonstrated that a cost-effective high-throughput real time PCR based on QD triggered HS PCR could be established with high consistency, sensitivity and accuracy.Hot start (HS) PCR is an excellent alternative for high-throughput real time PCR due to its ability to prevent nonspecific amplification at low temperature. Development of a cost-effective and simple HS PCR technique to guarantee high-throughput PCR specificity and consistency still remains a great challenge. In this study, we systematically investigated the HS characteristics of QDs triggered in real time PCR with EvaGreen and SYBR Green I dyes by the analysis of amplification curves, standard curves and melting curves. Two different kinds of DNA polymerases, Pfu and Taq, were employed. Here we showed that high specificity and efficiency of real time PCR were obtained in a plasmid DNA and an error-prone two-round PCR assay using QD-based HS PCR, even after an hour

Association of blood pressure with decline in renal function and time until the start of renal replacement therapy in pre-dialysis patients: a cohort study

Directory of Open Access Journals (Sweden)

Sijpkens Yvo WJ

2011-08-01

Full Text Available Abstract Background To investigate whether high blood pressure accelerates renal function decline in patients with advanced chronic kidney disease (CKD, we studied the association of systolic (SBP and diastolic blood pressure (DBP with decline in renal function and time until the start of renal replacement therapy (RRT in patients with CKD stages IV-V on pre-dialysis care. Methods In the PREPARE-1 cohort 547 incident pre-dialysis patients, referred as part of the usual care to outpatient clinics of eight Dutch hospitals, were included between 1999 and 2001 and followed until the start of RRT, mortality, or end of follow-up (January 1st 2008. Main outcomes were rate of decline in renal function, estimated as the slope of available eGFR measurements, and time until the start of RRT. Results A total of 508 patients, 57% men and median (IQR age of 63 (50-73 years, were available for analyses. Mean (SD decline in renal function was 0.35 (0.75 ml/min/1.73 m2/month. Every 10 mmHg increase in SBP or DBP resulted in an accelerated decline in renal function (adjusted additional decline 0.04 (0.02;0.07 and 0.05 (0.00;0.11 ml/min/1.73 m2/month respectively and an earlier start of RRT (adjusted HR 1.09 (1.04;1.14 and 1.16 (1.05;1.28 respectively. Furthermore, patients with SBP and DBP above the BP target goal of 2/month and an earlier start of RRT (adjusted HR 2.08 (1.25;3.44, compared to patients who achieved the target goal (11%. Comparing the decline in renal function and risk of starting RRT between patients with only SBP above the target (≥ 130 mmHg and patients with both SBP and DBP below the target (2/month and adjusted HR 2.24 (1.26;3.97. Therefore, it seems that especially having SBP above the target is harmful. Conclusions In pre-dialysis patients with CKD stages IV-V, having blood pressure (especially SBP above the target goal for CKD patients (

Michael Goodsite gæsteprofessor på Thunderbird School of Global Management

DEFF Research Database (Denmark)

Pedersen, Jens Christian

2010-01-01

Professor Michael Goodsite er blevet udnævnt til "Visiting Professor of Global Processes and Senior Research Fellow in Climate Strategy" ved Thunderbird School of Global Management, som har verdens højst rangerede MBA uddannelse inden for international handel.......Professor Michael Goodsite er blevet udnævnt til "Visiting Professor of Global Processes and Senior Research Fellow in Climate Strategy" ved Thunderbird School of Global Management, som har verdens højst rangerede MBA uddannelse inden for international handel....

Influence of decrease of the amount of starting salary of radiological technologists

International Nuclear Information System (INIS)

Shibuya, Koichi; Kato, Hirokazu

2010-01-01

This paper analyzes differences and changes within and between the occupation of nurses, radiological technologists, and medical technologists concerning starting salary from April 2005 to March 2009. This paper also investigates the percentage of difference in the amount of starting salary of nurses, radiological technologists, and medical technologists according to their educational attainments. The research-target used was the full-time-job-opening data provided to Okayama University within the given period of time, which specifies the amount of starting salary. The result shows that one's educational background has a crucial influence on the amount of one's starting salary. In fact, the percentage of the amount of starting salary base on one's educational attainment all increased in nurses, radiological technologists, and medical technologists from April 2007 to March 2009. However, this percentage for radiological technologists remains only 50% of increase, which was less significant than other two professional occupations. Moreover, the result indicates a crucial change in the amount of basic starting salary: while the amount of basic starting salary of nurses in 2008 has increased since 2005, that of radiological technologists has dropped remarkably. If this situation is not improved in the near future, the health-service sector may experience a decrease in the number of skilled practitioners which, in turn, will result in a decline in quality of medical care. (author)

IMMEDIATE EFFECTS OF DEEP TRUNK MUSCLE TRAINING ON SWIMMING START PERFORMANCE.

Science.gov (United States)

Iizuka, Satoshi; Imai, Atsushi; Koizumi, Keisuke; Okuno, Keisuke; Kaneoka, Koji

2016-12-01

In recent years, deep trunk muscle training has been adopted in various sports, including swimming. This is performed both in everyday training and as part of the warm-up routine before competitive races. It is suggested that trunk stabilization exercises are effective in preventing injury, and aid in improving performance. However, conclusive evidence of the same is yet to be obtained. The time of start phase of swimming is a factor that can significantly influence competition performance in a swimming race. If trunk stabilization exercises can provide instantaneous trunk stability, it is expected that they will lead to performance improvements in the start phase of swimming. The purpose of this study was to investigate the immediate effect of trunk stabilization exercises on the start phase in swimming. Intervention study. Nine elite male swimmers (mean age 20.2 ± 1.0 years; height 174.4 ± 3.5 cm; weight 68.9 ± 4.1 kg) performed the swimming start movement. The measurement variables studied included flying distance, and the time and velocity of subjects at hands' entry and on reaching five meters. Measurements were taken in trials immediately before and after the trunk stabilization exercises. A comparison between pre- and post-exercise measurements was assessed. The time to reach five meters (T 5m ) decreased significantly after trunk stabilization exercises, by 0.019 s (p = 0.02). Velocity at entry (V entry ) did not demonstrate significant change, while velocity at five meters (V 5m ) increased significantly after the exercises (p = 0.023). In addition, the speed reduction rate calculated from V entry and V 5m significantly decreased by 5.17% after the intervention (p = 0.036). Trunk stabilization exercises may help reduce the time from start to five meters in the start phase in swimming. The results support the hypothesis that these exercises may improve swimming performance. Level 3b.

Lean and global technology start-ups

DEFF Research Database (Denmark)

Tanev, Stoyan; Rasmussen, Erik Stavnsager; Zijdemans, Erik

2015-01-01

In this paper the authors introduce the concept of Lean Global Start-up (LGS) as a way of emphasizing the impossibility for new technology start-ups to deal separately with business development, innovation and early internationalization. For a newly established technology firm the task of being...... global and innovative at the same time should be seen as one process. The paper has two components – an introductory conceptual part and an empirical part that should be considered as basis for the preliminary validation of the conceptual insights. The research sample includes six firms – three from...... Canada and three from Denmark. The firms have had significant problems with the complexity, uncertainties and risks of being innovative on a global scale. They have however found ways of addressing these problems by a disciplined knowledge sharing and IP protection strategy and the efficient use...

Secondary Circuit Start Up Chemistry Optimisation

International Nuclear Information System (INIS)

Fontan, Guillaume; Morel, Pascal

2012-09-01

In a context of investment and renewal of equipment, Electricite De France (EDF) put enhanced efforts on operating practices during start-up of the secondary circuit, in order to improve operational performance and materials lifetime. This article focuses on the objective of optimizing the filling, the chemical conditioning and the thermal conditioning of the secondary fluid, while taking into account the following issues: - Limiting the time required to obtain a proper chemistry, - Limiting the amount of water and steam used, - Limiting the amount of effluent generated. The scope is all start-up conditions of secondary circuit, both after refuelling outage or fortuitous shutdowns of the plant. The recommendations produced are based on existing local procedures and good practices, which were collected and developed in order to propose a generic methodology understandable and useful both for operators, chemists and managers. (authors)

School Starting Age and Crime

DEFF Research Database (Denmark)

Landersø, Rasmus; Nielsen, Helena Skyt; Simonsen, Marianne

This paper investigates the effects of school starting age on crime while relying on variation in school starting age induced by administrative rules; we exploit that Danish children typically start first grade in the calendar year they turn seven, which gives rise to a discontinuity in children......’s school starting age. Analyses are carried out using register-based Danish data. We find that higher age at school start lowers the propensity to commit crime, but that this reduction is caused by incapacitation while human capital accumulation is unaffected. Importantly, we also find that the individuals...

Start-Up of FEL Oscillator from Shot Noise

International Nuclear Information System (INIS)

Kumar, V.; Krishnagopal, S.; Fawley, W.M.

2007-01-01

In free-electron laser (FEL) oscillators, as in self-amplified spontaneous emission (SASE) FELs, the buildup of cavity power starts from shot noise resulting from the discreteness of electronic charge. It is important to do the start-up analysis for the build-up of cavity power in order to fix the macropulse width from the electron accelerator such that the system reaches saturation. In this paper, we use the time-dependent simulation code GINGER [1]to perform this analysis. We present results of this analysis for the parameters of the Compact Ultrafast TErahertz FEL (CUTE-FEL) [2] being built at RRCAT

A cross-cultural comparison of sleep duration between U.S. and Australian adolescents: the effect of school start time, parent-set bedtimes and extracurricular load

NARCIS (Netherlands)

Short, M.A.; Gradisar, M.; Lack, L.C.; Wright, H.R.; Dewald, J.F.; Wolfson, A.R.; Carskadon, M.A.

2013-01-01

Study Objective. To test whether sleep duration on school nights differs between adolescents in Australia and the United States and, if so, whether this difference is explained by cultural differences in school start time, parental involvement in setting bedtimes, and extracurricular commitments.

Reduced γ–γ time walk to below 50 ps using the multiplexed-start and multiplexed-stop fast-timing technique with LaBr_3(Ce) detectors

International Nuclear Information System (INIS)

Régis, J.-M.; Saed-Samii, N.; Rudigier, M.; Ansari, S.; Dannhoff, M.; Esmaylzadeh, A.; Fransen, C.; Gerst, R.-B.; Jolie, J.; Karayonchev, V.; Müller-Gatermann, C.; Stegemann, S.

2016-01-01

The electronic γ–γ fast-timing technique using arrays consisting of many LaBr_3(Ce) detectors is a powerful method to determine lifetimes of nuclear excited states with a lower limit of about 5 ps. This method requires the determination of the energy-dependent time walk of the zero time which is represented by the centroid of a prompt γ–γ time distribution. The full-energy peak versus full-energy peak prompt response difference which represents the linearly combined mean γ–γ time walk of a fast-timing array consisting of 8 LaBr_3(Ce) detectors was measured using a standard "1"5"2Eu γ-ray source for the energy region of 40–1408 keV. The data were acquired using a “multiplexed-start and multiplexed-stop” analogue electronics circuitry and analysed by employing the generalized centroid difference method. Concerning the cylindrical 1.5 in.×1.5 in. LaBr_3(Ce) crystals which are coupled to the Hamamatsu R9779 photomultiplier tubes, the best fast-timing array time resolution of 202(3) ps is obtained for the two prompt γ lines of "6"0Co by using the leading-edge timing principle. When using the zero-crossover timing principle the time resolution is degraded by up to 30%, dependent on the energy and the shaping delay time of the constant fraction discriminator model Ortec 935. The smallest γ–γ time walk to below 50 ps is obtained by using a shaping delay time of about 17 ns and an optimum “time-walk adjustment” needed for detector output pulses with amplitudes smaller than 400 mV.

SISTEM CERDAS DIAGNOSA PENYAKIT DALAM MENGGUNAKAN JARINGAN SYARAF TIRUAN DENGAN METODE PERCEPTRON

Directory of Open Access Journals (Sweden)

Usman Usman

2017-12-01

Full Text Available Aplikasi Jaringan Syaraf Tiruan (JST untuk diagnosa  Penyakit Dalam dengan metode perceptron. Aplikasi ini dibuat untuk mengetahui keakuratan diagnosa Penyakit Dalam menggunakan JST perceptron dan mengimplementasikan JST perceptron berdasarkan gejala-gejala Penyakit Dalam ke dalam matlab dengan tampilan Graphical User Interface (GUI. Penyakit Dalam yang dibahas sebanyak 9 Penyakit Dalam. Yaitu penyakit  Asma bronchial, Anemia, Demam berdarah, Diabetes mellitus, Gagal Jantung, Tetanus, Hipertensi, Hepatitis, dan  Tuberkolosis paru. Gejala penyakit dalam yang diambil berdasarkan data rekam medis penderita Penyakit Dalam dan data pasien yang berobat  di Poli Penyakit Dalam RSUD Puri Husada Tembilahan. Dari hasil pelatihan (training terhadap 48 data, kecocokan keluaran jaringan dan target yang di inginkan yaitu penyakit dalam 100% dapat dikenali/sesuai dengan target yang di inginkan. Dan hasil pengujian data baru sebanyak 10 kali pengujian menghasilkan keluaran sekitar 78,9 % yang sesuai dengan target dan 21,1% yang tidak sesuai dengan target. Hasil pengujian dan pelatihan di implementasikan ke dalam GUI sebagai aplikasi dan user interface.

APLIKASI MODEL ARTIFICIAL NEURAL NETWORKS UNTUK STOCK FORECASTING DI PASAR MODAL INDONESIA

Directory of Open Access Journals (Sweden)

Christian Herdinata

2017-03-01

Full Text Available This research showed the applicat ion of model Art if icial Neural Networks (ANN orJaringan Syaraf Tiruan (JST at the f ield of monetary science, especially for the applicat ion off inancial forecast ing. ANN or JST was a new alternat ive for the applicat ion of f inancialforecast ing.The purpose of this research was to know whether the stock index instantaneouslyand fully ref lect historical informat ion, in Indonesia Stock Exchange (IDX. The research usedcomparison between return of technical t rading rule based Art if icial Neural Networks (ANNmodel and return of buy & hold st rategy. The result showed that the weakness form ofef f icient market hypothesis was rejected in the Indonesian capital market . Expectat ion ofthis research was giving informat ion and securing the market perpet rators that st ill enabledto get abnormal of return by doing commerce in chnical through forecast ing of model Art ificial Neural Networks (ANN or Jaringan Syaraf Tiruan ( JST.

Getting started with HTML5 WebSocket programming

CERN Document Server

Pterneas, Vangos

2013-01-01

Getting Started with HTML5 Websocket Programming takes a tutorial-based approach.This book is for anyone who wants to build high-performance, true, real-time web applications. Being familiar with frontend web development (HTML / XHTML, JavaScript) would be ideal.

Starting-up sequence of the AWEC-60 wind turbine

International Nuclear Information System (INIS)

Avia, F.; Cruz, M. de la.

1991-01-01

One of the most critical status of the wind turbines operation is the starting-up sequence and the connection to the grid, due to the actuating loads that could be several times the loads during operation at rated conditions. Due to this fact, the control strategy is very important during the starting-up sequence in order to minimize the loads on the machine. For this purpose it is necessary to analyze the behaviour of the wind turbine during that sequence in different wind conditions and machine conditions. This report shows the graphic information about fifty starting-up sequences of the AWEC-60 wind turbine of 60 m. diameter and 1200 kW of rated power, recorded in April 1991 and cut-out wind speed. (author)

Synchronizing Education to Adolescent Biology: "Let Teens Sleep, Start School Later"

Science.gov (United States)

Kelley, Paul; Lockley, Steven W.; Foster, Russell G.; Kelley, Jonathan

2015-01-01

Arne Duncan, US Secretary of State for Education, tweeted in 2013: "let teens sleep, start school later". This paper examines early starts and their negative consequences in the light of key research in the last 30 years in sleep medicine and circadian neuroscience. An overview of the circadian timing system in adolescence leading to…

Peer Effects on Head Start Children’s Preschool Competency

Science.gov (United States)

DeLay, Dawn; Hanish, Laura D.; Martin, Carol Lynn; Fabes, Richard A.

2015-01-01

The goals of the present study were to investigate whether young children attending Head Start (N=292; Mage=4.3 years) selected peers based on their preschool competency and whether children’s levels of preschool competency were influenced by their peers’ levels of preschool competency. Children’s peer interaction partners were intensively observed several times a week over one academic year. Social network analyses revealed that children selected peer interaction partners with similar levels of preschool competency and were influenced over time by their partners’ levels of preschool competency. These effects held even after controlling for several child (e.g., sex and language) and family factors (e.g., financial strain and parent education). Implications for promoting preschool competency among Head Start children are discussed. PMID:26479545

A single center analysis of factors influencing study start-up timeline in clinical trials.

Science.gov (United States)

Krafcik, Brianna M; Doros, Gheorghe; Malikova, Marina A

2017-11-01

Efficient start-up phase in clinical trials is crucial to execution. The goal was to determine factors contributing to delays. The start-up milestones were assessed for 38 studies and analyzed. Total start-up time was shorter for following studies: device trials, no outsourcing, fewer ancillary services used and in interventional versus observational designs. The use of a centralized Institutional Review Board (IRB) versus a local IRB reduced time to approval. Studies that never enrolled took longer on average to finalize their budget/contract, and obtain IRB than ones that did enroll. Different features of clinical trials can affect timeline of start-up process. An understanding of the impact of each feature allows for optimization.

Relationship between different push-off variables and start performance in experienced swimmers.

Science.gov (United States)

García-Ramos, Amador; Feriche, Belén; de la Fuente, Blanca; Argüelles-Cienfuegos, Javier; Strojnik, Vojko; Strumbelj, Boro; Štirn, Igor

2015-01-01

The objective of this study was to determine the relationship between different variables measured with a force plate during the swimming start push-off phase and start performance presented by times to 5, 10 and 15 m. Twenty-one women from the Slovenian national swimming team performed two different swim starts (freestyle and undulatory) on a portable force plate to a distance further than 15 m. Correlations between push-off variables and times to 5, 10 and 15 m were quantified through Pearson's product-moment correlation coefficient (r). The variables that significantly correlated (p  .05). Based on the results of this study, we can conclude that horizontal take-off velocity and average horizontal acceleration (calculated as the average horizontal force divided by swimmer's body mass) are the variables most related to swimming start performance in experienced swimmers, and therefore could be the preferred measures to monitor swimmers' efficiency during the push-off phase.

MR angiography of the pelvic and lower leg arteries: starting with time-resolved imaging of the lower leg is recommended

International Nuclear Information System (INIS)

Schmitt, R.; Christopoulos, G.; Brunner, S.; Froehner, S.; Dobritz, M.; Fellner, F.

2001-01-01

58 patients suffering from peripheral arterial vascular disease were examined using contrast-enhanced MR angiography with the intention of optimizing the visualization of lower leg arteries. Different from the customary acquisition order, were first the arteries of the lower legs depicted with three time-resolved phases. Afterwards, the iliacal and femoral vessels were imaged by applying the floating-table technique in two steps. In all cases, the lower leg arteries were depicted without overlying veins. By injecting the contrast agent in two phases, imaging quality of the iliofemoral arteries was not significantly reduced. - In conclusion, we would recommend the hybrid technique of peripheral contrast-enhanced MRA with primarily starting the acquisition of the lower legs in cases of foot infections or ulcerations where the transit time is reduced bi- or unilaterally. (orig.) [de

Start-up test of Fukushima Daini Nuclear Power Station Unit No.3

International Nuclear Information System (INIS)

Inomata, Toshio; Umezu, Akira; Kajikawa, Makoto; Koibuchi, Hiroshi; Netsu, Nobuhiko.

1986-01-01

In Unit 3 of the Fukushima Nuclear Power Station II (daini), a BWR power plant of output 1,100 MW, commercial operation was started in June 1985. Its start-up test was finished successfully in about nine months. That is, new equipments introduced were demonstration tested. Though the items of testing are increased, the start-up test took short time, resulting in construction period only 54.7 months of the Unit 3, the shortest in the world. During the test, there was no scramming other than the planned. Described are the following: an outline of the Unit 3, the items of its improvement and standardization, including the new equipments, preparations for the start-up test, the start-up test and its evaluation. (Mori, K.)

Analysis of the start-up and control of a particle bed reactor

International Nuclear Information System (INIS)

Lazareth, O.W.; Araj, K.J.; Horn, F.L.; Ludewig, H.; Powell, J.R.

1987-01-01

This study describes the modeling of start-up transients in Particle Bed Reactors (PBR) for burst electric power. Two computer programs have been developed to analyze the start-up process. The first program (named KINETIC) analyzes the entire fuel element, calculating time dependent solutions for power and the temperature distribution in the packed bed. The second program (named SPHEAT, for Spherical Heating) calculates time-dependent temperatures inside individual, cladded fuel particles. The two programs provide powerful analytical tools for evaluation of material and geometrical options, power and time constraints, and conditions that could lead to element failures

Starting an aphasia center?

Science.gov (United States)

Elman, Roberta J

2011-08-01

Starting an aphasia center can be an enormous challenge. This article provides initial issues to review and consider when deciding whether starting a new organization is right for you. Determining the need for the program in your community, the best size and possible affiliation for the organization, and available resources, as well as developing a business plan, marketing the program, and building awareness in the community, are some of the factors that are discussed. Specific examples related to starting the Aphasia Center of California are provided. © Thieme Medical Publishers.

OPTIMAL CONTROL OF AUTOCLAVE START MODE IN THE PRODUCTION OF NITRIC ACID

OpenAIRE

Ладієва, Леся Ростиславівна; Ширма, А. В.

2015-01-01

The algorithm of optimal control of autoclave start mode in the production of nitric acid is proposed. By optimality criterion is selected minimum time-autoclave at preset mode with the restriction on the concentration of nitric acid. End time start mode is entered on the terminal part of the cost function. The method of penalties and a gradient procedure is used to solve the problem. The applied algorithm is allowed to bring an autoclave at a given technological regime.Keywords: production o...

Cardiovascular and noncardiovascular mortality among patients starting dialysis

DEFF Research Database (Denmark)

de Jager, Dinanda J; Grootendorst, Diana C; Jager, Kitty J

2009-01-01

CONTEXT: Cardiovascular mortality is considered the main cause of death in patients receiving dialysis and is 10 to 20 times higher in such patients than in the general population. OBJECTIVE: To evaluate if high overall mortality in patients starting dialysis is a consequence of increased cardiov...

Looking for What's Next: Is It Time to Start Talking about Library 2.1?

Science.gov (United States)

Mathews, Brian S.

2009-01-01

For a while, the idea of social software was something that had to be sold. Although many librarians were experimenting with it, there were a lot of concerns. Now, social software, like Library 2.1, is starting to be viewed less as a disruptive force and more as a regular part of a librarian's workflow. This article highlights a few examples that…

Reduced γ–γ time walk to below 50 ps using the multiplexed-start and multiplexed-stop fast-timing technique with LaBr{sub 3}(Ce) detectors

Energy Technology Data Exchange (ETDEWEB)

Régis, J.-M., E-mail: regis@ikp.uni-koeln.de [Institut für Kernphysik der Universität zu Köln, Zülpicher Str. 77, 50937 Köln (Germany); Saed-Samii, N., E-mail: nima@ikp.uni-koeln.de [Institut für Kernphysik der Universität zu Köln, Zülpicher Str. 77, 50937 Köln (Germany); Rudigier, M. [Institut für Kernphysik der Universität zu Köln, Zülpicher Str. 77, 50937 Köln (Germany); Department of Physics, University of Surrey, Guildford GU2 7XH (United Kingdom); Ansari, S.; Dannhoff, M.; Esmaylzadeh, A.; Fransen, C.; Gerst, R.-B.; Jolie, J.; Karayonchev, V.; Müller-Gatermann, C.; Stegemann, S. [Institut für Kernphysik der Universität zu Köln, Zülpicher Str. 77, 50937 Köln (Germany)

2016-07-01

The electronic γ–γ fast-timing technique using arrays consisting of many LaBr{sub 3}(Ce) detectors is a powerful method to determine lifetimes of nuclear excited states with a lower limit of about 5 ps. This method requires the determination of the energy-dependent time walk of the zero time which is represented by the centroid of a prompt γ–γ time distribution. The full-energy peak versus full-energy peak prompt response difference which represents the linearly combined mean γ–γ time walk of a fast-timing array consisting of 8 LaBr{sub 3}(Ce) detectors was measured using a standard {sup 152}Eu γ-ray source for the energy region of 40–1408 keV. The data were acquired using a “multiplexed-start and multiplexed-stop” analogue electronics circuitry and analysed by employing the generalized centroid difference method. Concerning the cylindrical 1.5 in.×1.5 in. LaBr{sub 3}(Ce) crystals which are coupled to the Hamamatsu R9779 photomultiplier tubes, the best fast-timing array time resolution of 202(3) ps is obtained for the two prompt γ lines of {sup 60}Co by using the leading-edge timing principle. When using the zero-crossover timing principle the time resolution is degraded by up to 30%, dependent on the energy and the shaping delay time of the constant fraction discriminator model Ortec 935. The smallest γ–γ time walk to below 50 ps is obtained by using a shaping delay time of about 17 ns and an optimum “time-walk adjustment” needed for detector output pulses with amplitudes smaller than 400 mV.

30 CFR 75.1913 - Starting aids.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Starting aids. 75.1913 Section 75.1913 Mineral... SAFETY STANDARDS-UNDERGROUND COAL MINES Diesel-Powered Equipment § 75.1913 Starting aids. (a) Volatile fuel starting aids shall be used in accordance with recommendations provided by the starting aid...

Variable School Start Times and Middle School Student's Sleep Health and Academic Performance.

Science.gov (United States)

Lewin, Daniel S; Wang, Guanghai; Chen, Yao I; Skora, Elizabeth; Hoehn, Jessica; Baylor, Allison; Wang, Jichuan

2017-08-01

Improving sleep health among adolescents is a national health priority and implementing healthy school start times (SSTs) is an important strategy to achieve these goals. This study leveraged the differences in middle school SST in a large district to evaluate associations between SST, sleep health, and academic performance. This cross-sectional study draws data from a county-wide surveillance survey. Participants were three cohorts of eighth graders (n = 26,440). The school district is unique because SST ranged from 7:20 a.m. to 8:10 a.m. Path analysis and probit regression were used to analyze associations between SST and self-report measures of weekday sleep duration, grades, and homework controlling for demographic variables (sex, race, and socioeconomic status). The independent contributions of SST and sleep duration to academic performance were also analyzed. Earlier SST was associated with decreased sleep duration (χ 2  = 173, p academic performance, and academic effort. Path analysis models demonstrated the independent contributions of sleep duration, SST, and variable effects for demographic variables. This is the first study to evaluate the independent contributions of SST and sleep to academic performance in a large sample of middle school students. Deficient sleep was prevalent, and the earliest SST was associated with decrements in sleep and academics. These findings support the prioritization of policy initiatives to implement healthy SST for younger adolescents and highlight the importance of sleep health education disparities among race and gender groups. Copyright © 2017 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Jump Starting Entrepreneurship

DEFF Research Database (Denmark)

Burcharth, Ana; Smith, Pernille; Frederiksen, Lars

How do laid-off employees become entrepreneurs after receiving a dream start into self-employment? This question is relevant for policy makers and entrepreneurship researchers alike since it raises the possibility of a reverse entrepreneurial opportunity, in which the chance of becoming an entrep......How do laid-off employees become entrepreneurs after receiving a dream start into self-employment? This question is relevant for policy makers and entrepreneurship researchers alike since it raises the possibility of a reverse entrepreneurial opportunity, in which the chance of becoming...... an entrepreneur emerges before the discovery of a profitable opportunity. We empirically examine this question on the unique setting of a corporate entrepreneurship program. In the midst of a corporate crisis, Nokia supported laid-off employees to start their own ventures under favorable conditions. We...... persevered in their endeavors and eventually became comfortable with their new career prospects. We discuss the psychological factors that impact career transition after organizational closure and theorize weather they encourage or discourage entrepreneurship....

Influence of starting powder milling on magnetic properties of Mn-Zn ferrite

Directory of Open Access Journals (Sweden)

Miodrag M. Milutinov

2017-06-01

Full Text Available In this paper, the influence of additional sieving and milling of starting industrial Mn-Zn powders on magnetic properties was investigated. The starting powder was milled for 60 minutes, followed by sieving through 325 and 400 meshes. The starting and milled powders were used to fabricate toroid shaped samples sintered at 1200°C for 2 hours. Structural parameters of the fabricated samples were analysed by X-ray diffraction and scanning electron microscopy. Complex permeability, core loss density, and hysteresis were measured using the modified watt-meter method. The complex permeability and hysteresis loop were modelled with a new model proposed in the paper. The core loss density was modelled with the Steinmetz empirical equation. The experimental results and calculations show the significance of the additional milling and sieving process on magnetic properties of Mn-Zn ferrite in the frequency range 0.1-10MHz. These processes increase the relative permeability about 3 times and decrease the core loss 4 times by milling of the starting powder.

Systemic Inflammation, Coagulation, and Clinical Risk in the START Trial

DEFF Research Database (Denmark)

Baker, Jason V; Sharma, Shweta; Grund, Birgit

2017-01-01

Background: The Strategic Timing of AntiRetroviral Treatment (START) trial demonstrated that immediate (at CD4+ >500 cells/µL) vs deferred (to CD4+ ... available for 4299 START participants (92%). Mean follow-up was 3.2 years. Higher levels of IL-6 and D-dimer were the only biomarkers associated with risk for AIDS, SNA or death, as well as the individual components of SNA and AIDS events (HRs ranged 1.37-1.41 per 2-fold higher level), even after adjustment...

76 FR 50813 - Major Capital Investment Projects; Guidance on News Starts/Small Starts Policies and Procedures

Science.gov (United States)

2011-08-16

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Major Capital Investment Projects; Guidance on News Starts/Small Starts Policies and Procedures AGENCY: Federal Transit Administration (FTA... Administration (FTA) to publish policy guidance on the New and Small Starts capital project review and evaluation...

A comparison of base running start techniques in collegiate fastpitch softball athletes

OpenAIRE

Massey, Kelly P.; Brouillette, Kelly Miller; Martino, Mike

2018-01-01

This study examined the time difference between three different base running start techniques. Thirteen Division II collegiate softball players performed maximal sprints off a softball bag at two different distances. Sprint times at 4.57 and 18.29 meters for each technique were measured using Fusion Sport’s Smartspeed System. At both 4.57 and 18.29 meters, the rocking start (0.84 ± 0.10; 3.04 ± 0.16 s) was found to be significantly faster (in seconds) than both the split technique (1.01 ± 0.0...

45 CFR 1308.21 - Parent participation and transition of children into Head Start and from Head Start to public...

Science.gov (United States)

2010-10-01

... into Head Start and from Head Start to public school. 1308.21 Section 1308.21 Public Welfare... AND HUMAN SERVICES THE ADMINISTRATION FOR CHILDREN, YOUTH AND FAMILIES, HEAD START PROGRAM HEAD START... Standards § 1308.21 Parent participation and transition of children into Head Start and from Head Start to...

Business incubator as a support measure for start-ups in Russia and Sweden. : Comparative analysis.

OpenAIRE

Kiseleva, Maria

2017-01-01

Growth and developing of start-ups plays an important role as starting new business is one of the indicator that shows the economy level of each country. At that time start-ups need support and one of such support institutions is business incubator who can provide all resources that start-ups need. Different studies exist about business incubator as a support measure and the role of them for start- ups, but there is a lack of studies in analyzing this topic in different business environments....

Device for the nuclear reactor automatic start-up and power control

International Nuclear Information System (INIS)

Nikiforov, B.N.; Volkov, A.V.; Ogon'kov, A.I.

1978-01-01

A description and flowsheet of a reactor start-up and power-control automatic device containing no nonlinear elements with a relay characteristic are presented. The device consists of two independent channels for measuring the physical power and time (period) constant of the reactor. Requirements for the device are considered, based on the condition of a minimum permissible number of a servomechanism operations due to fluctuations of an input signal which appear because of the statistical nature of processes taking place in the reactor. It is noted that the threshold amplifier used in the device allows a considerable decrease of the reactor start-up time

Process algebra with timing : real time and discrete time

NARCIS (Netherlands)

Baeten, J.C.M.; Middelburg, C.A.; Bergstra, J.A.; Ponse, A.J.; Smolka, S.A.

2001-01-01

We present real time and discrete time versions of ACP with absolute timing and relative timing. The starting-point is a new real time version with absolute timing, called ACPsat, featuring urgent actions and a delay operator. The discrete time versions are conservative extensions of the discrete

Path to Smoking Addiction Starts at Very Young Ages

Science.gov (United States)

THE PATH TO TOBACCO ADDICTION STARTS AT VERY YOUNG AGES Lifetime smoking and other tobacco use almost always begins by the time kids graduate from ... regular smoking, which typically turns into a strong addiction—well before the age of 18—that can ...

76 FR 17736 - Major Capital Investment Program-New Starts

Science.gov (United States)

2011-03-30

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Major Capital Investment Program--New... unallocated Major Capital Investment (New Starts) program funds. The funds accelerate federal payments for new... projects. The funding will give a well-timed boost to communities that have made important investments in...

Experience from start-ups of the first ANITA Mox plants.

Science.gov (United States)

Christensson, M; Ekström, S; Andersson Chan, A; Le Vaillant, E; Lemaire, R

2013-01-01

ANITA™ Mox is a new one-stage deammonification Moving-Bed Biofilm Reactor (MBBR) developed for partial nitrification to nitrite and autotrophic N-removal from N-rich effluents. This deammonification process offers many advantages such as dramatically reduced oxygen requirements, no chemical oxygen demand requirement, lower sludge production, no pre-treatment or requirement of chemicals and thereby being an energy and cost efficient nitrogen removal process. An innovative seeding strategy, the 'BioFarm concept', has been developed in order to decrease the start-up time of new ANITA Mox installations. New ANITA Mox installations are started with typically 3-15% of the added carriers being from the 'BioFarm', with already established anammox biofilm, the rest being new carriers. The first ANITA Mox plant, started up in 2010 at Sjölunda wastewater treatment plant (WWTP) in Malmö, Sweden, proved this seeding concept, reaching an ammonium removal rate of 1.2 kgN/m³ d and approximately 90% ammonia removal within 4 months from start-up. This first ANITA Mox plant is also the BioFarm used for forthcoming installations. Typical features of this first installation were low energy consumption, 1.5 kW/NH4-N-removed, low N₂O emissions, started up at Sundets WWTP in Växjö, Sweden, reached full capacity with more than 90% ammonia removal within 2 months from start-up. By applying a nitrogen loading strategy to the reactor that matches the capacity of the seeding carriers, more than 80% nitrogen removal could be obtained throughout the start-up period.

Comparison of crossover and jab step start techniques for base stealing in baseball.

Science.gov (United States)

Miyanishi, Tomohisa; Endo, So; Nagahara, Ryu

2017-11-01

Base stealing is an important tactic for increasing the chance of scoring in baseball. This study aimed to compare the crossover step (CS) and jab step (JS) starts for base stealing start performance and to clarify the differences between CS and JS starts in terms of three-dimensional lower extremity joint kinetics. Twelve male baseball players performed CS and JS starts, during which their motion and the force they applied to the ground were simultaneously recorded using a motion-capture system and two force platforms. The results showed that the normalised average forward external power, the average forward-backward force exerted by the left leg, and the forward velocities of the whole body centre of gravity generated by both legs and the left leg were significantly higher for the JS start than for the CS start. Moreover, the positive work done by hip extension during the left leg push-off was two-times greater for the JS start than the CS start. In conclusion, this study has demonstrated that the jab step start may be the better technique for a base stealing start and that greater positive work produced by left hip extension is probably responsible for producing its larger forward ground reaction force.

The Relationship Between the Lower-Body Muscular Profile and Swimming Start Performance

Directory of Open Access Journals (Sweden)

García-Ramos Amador

2016-04-01

Full Text Available This study aimed to examine the correlation of different dry land strength and power tests with swimming start performance. Twenty international level female swimmers (age 15.3 ± 1.6 years, FINA point score 709.6 ± 71.1 performed the track freestyle start. Additionally, dry land tests were conducted: a squat (SJ and countermovement jumps (CMJ, b squat jumps with additional resistance equivalent to 25, 50, 75 and 100% of swimmers’ body weight [BW], and c leg extension and leg flexion maximal voluntary isometric contractions. Correlations between dry land tests and start times at 5, 10 and 15 m were quantified through Pearson’s linear correlation coefficients (r. The peak bar velocity reached during the jumps with additional resistance was the variable most correlated to swimming start performance (r = -0.57 to -0.66 at 25%BW; r = -0.57 to -0.72 at 50%BW; r = -0.59 to -0.68 at 75%BW; r = -0.50 to - 0.64 at 100%BW. A few significant correlations between the parameters of the SJ and the CMJ with times of 5 and 10 m were found, and none with the isometric variables. The peak velocity reached during jumps with external loads relative to BW was found a good indicator of swimming start performance.

Preschool Facilities - MDC_HeadStart

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — A label (point) feature class of Head Start / Early Head Start/ Delegate Agencies/ Child Care Partnership & Family Day Care Homes Programs location in Miami-Dade...

Sleep on Long Haul Layovers and Pilot Fatigue at the Start of the Next Duty Period.

Science.gov (United States)

Cosgrave, Jan; Wu, Lora J; van den Berg, Margo; Signal, T Leigh; Gander, Philippa H

2018-01-01

Layovers are critical for pilot recovery between flights and minimum layover durations are required by regulation. However, research on the factors affecting layover sleep and safety performance indicators (SPIs) before subsequent flights is relatively sparse. The present project combined data from 6 studies, including 8 long-range and 5 ultra-long range out-and-back trips across a range of different layover destinations (299 pilots in 4-person crews, 410 layovers, 1-3 d layover duration). Sleep was monitored via actigraphy from 3 d pre-trip to at least 3 d post-trip. Pilots rated their sleepiness (Karolinska Sleepiness Scale, KSS) and fatigue (Samn-Perelli scale, SP) at duty start for the inbound flight. Mixed model ANOVAs identified independent associations between fatigue and sleepiness SPIs and operational factors (domicile time of duty start for the inbound flight in six 4-h bins, layover duration, and total sleep time (TST) in the 24 h prior to inbound duty start). TST was greatest on layovers ending between 1200-1559 domicile time (time in the city from which the outbound flight departed) and TST was a significant predictor of both KSS and SP ratings at duty start for the inbound flight. TST in the 24 h prior to the inbound flight was greatest when duty start time allowed for the inclusion of a full domicile night time period. In this dataset, circadian end-time of layovers is a key determinant of pilot fatigue status at the beginning of the inbound duty period.Cosgrove J, Wu LJ, van den Berg M, Signal TL, Gander PH. Sleep on long haul layovers and pilot fatigue at the start of the next duty period. Aerosp Med Hum Perform. 2018; 89(1):19-25.

Starting Hormone Therapy at Menopause Increases Breast Cancer Risk

Science.gov (United States)

According to a January 28, 2011 article in the Journal of the National Cancer Institute, women who start taking menopausal hormone therapy around the time of menopause have a higher risk of breast cancer than women who begin taking hormones a few years later.

Getting started with Unity

CERN Document Server

Felicia, Patrick

2013-01-01

Getting Started with Unity is written in an easy-to-follow tutorial format.""Getting Started with Unity"" is for[ 3D game developers[/color] who would like to learn how to use Unity3D and become familiar with its core features. This book is also suitable for intermediate users who would like to improve their skills. No prior knowledge of Unity3D is required.

Bootstrap finance: the art of start-ups.

Science.gov (United States)

Bhide, A

1992-01-01

Entrepreneurship is more popular than ever: courses are full, policymakers emphasize new ventures, managers yearn to go off on their own. Would-be founders often misplace their energies, however. Believing in a "big money" model of entrepreneurship, they spend a lot of time trying to attract investors instead of using wits and hustle to get their ideas off the ground. A study of 100 of the 1989 Inc. "500" list of fastest growing U.S. start-ups attests to the value of bootstrapping. In fact, what it takes to start a business often conflicts with what venture capitalists require. Investors prefer solid plans, well-defined markets, and track records. Entrepreneurs are heavy on energy and enthusiasm but may be short on credentials. They thrive in rapidly changing environments where uncertain prospects may scare off established companies. Rolling with the punches is often more important than formal plans. Striving to adhere to investors' criteria can diminish the flexibility--the try-it, fix-it approach--an entrepreneur needs to make a new venture work. Seven principles are basic for successful start-ups: get operational fast; look for quick break-even, cash-generating projects; offer high-value products or services that can sustain direct personal selling; don't try to hire the crack team; keep growth in check; focus on cash; and cultivate banks early. Growth and change are the start-up's natural environment. But change is also the reward for success: just as ventures grow, their founders usually have to take a fresh look at everything again: roles, organization, even the very policies that got the business up and running.

Relationship Between Vertical Jump Height and Swimming Start Performance Before and After an Altitude Training Camp.

Science.gov (United States)

García-Ramos, Amador; Padial, Paulino; de la Fuente, Blanca; Argüelles-Cienfuegos, Javier; Bonitch-Góngora, Juan; Feriche, Belén

2016-06-01

This study aimed (a) to analyze the development in the squat jump height and swimming start performance after an altitude training camp, (b) to correlate the jump height and swimming start performance before and after the altitude training period, and (c) to correlate the percent change in the squat jump height with the percent change in swimming start performance. Fifteen elite male swimmers from the Spanish Junior National Team (17.1 ± 0.8 years) were tested before and after a 17-day training camp at moderate altitude. The height reached in the squat jump exercise with additional loads of 0, 25, 50, 75, and 100% of swimmers' pretest body weight and swimming start performance (time to 5, 10, and 15 m) were the dependent variables analyzed. Significant increases in the jump height (p ≤ 0.05; effect size [ES]: 0.35-0.48) and swimming start performance (p jump height before training (r = -0.56 to -0.77) and after training (r = -0.50 to -0.71). The change in the squat jump height was inversely correlated with the change in the start time at 5 m (r = -0.47), 10 m (r = -0.73), and 15 m (r = -0.62). These results suggest that altitude training can be suitable to enhance explosive performance. The correlations obtained between the squat jump height and start time in the raw and change scores confirm the relevance of having high levels of lower-body muscular power to optimize swimming start performance.

Starting-up sequence of the AWEC-6 0 wind turbine

International Nuclear Information System (INIS)

Avia, F.; Cruz, M. de la

1991-01-01

One of the most critical status of the wind turbines operation is the starting-up sequence and the connection to the grid, due to the actuating loads that could be several times the loads during operation at rated conditions. Due to this fact, the control strategy is very important during the starting-up sequence in order to minimize the loads on the machine. For this purpose it is necessary to analyze the behaviour of the wind turbine during that sequence in different wind conditions and machine conditions This report shows the graphic Information about fifty starting-up sequences of the AWEC-60 wind turbine of 60 m diameter and 1200 kW of rated power, recorded in April 1991 and covering all the operation range between cut-in and cut-out wind speed. (Author) 2 refs

Starting out

NARCIS (Netherlands)

Ans Merens; Freek Bucx

2018-01-01

Original title: Werken aan de start Women in the Netherlands have been outperforming men in education for many years now. However, this superior educational achievement does not translate into a better position on the labour market. More women work today than in the past, but still fewer than men.

Start 2: Thinking one move ahead

Energy Technology Data Exchange (ETDEWEB)

Gaines, L.L.

1991-11-01

At their summit meeting in the spring of 1990, Presidents Bush and Gorbachev issued a joint statement expressing their intentions to continue the process of strategic arms control beyond the Strategic Arms Reduction Treaty (START), which was eventually signed in July 1991, toward agreement on further reductions. They set general goals for negotiation of a follow-on treaty to START, which has been called START II. President Bush`s historic speech on September 27, 1991, reinforced those goals and specified several actions the US would take. It is the purpose of this report to examine possible provisions of START II and the implications of those provisions for achievement of the goals set at the 1990 summit, for verifiability, and for US force planning. This look ahead will contribute to advance planning of appropriate negotiating positions, verification research and development (R&D), and force modernization and restructuring. This report describes the goals for a START II treaty and possible means for achieving them. It postulates one set of provisions for such a treaty, while it examines force structures for the US that could result from adoption of a treaty with these provisions. The adequacy of methods for verifying START II are examined and the implications of a START II treaty are postulated.

Start 2: Thinking one move ahead

Energy Technology Data Exchange (ETDEWEB)

Gaines, L.L.

1991-11-01

At their summit meeting in the spring of 1990, Presidents Bush and Gorbachev issued a joint statement expressing their intentions to continue the process of strategic arms control beyond the Strategic Arms Reduction Treaty (START), which was eventually signed in July 1991, toward agreement on further reductions. They set general goals for negotiation of a follow-on treaty to START, which has been called START II. President Bush's historic speech on September 27, 1991, reinforced those goals and specified several actions the US would take. It is the purpose of this report to examine possible provisions of START II and the implications of those provisions for achievement of the goals set at the 1990 summit, for verifiability, and for US force planning. This look ahead will contribute to advance planning of appropriate negotiating positions, verification research and development (R D), and force modernization and restructuring. This report describes the goals for a START II treaty and possible means for achieving them. It postulates one set of provisions for such a treaty, while it examines force structures for the US that could result from adoption of a treaty with these provisions. The adequacy of methods for verifying START II are examined and the implications of a START II treaty are postulated.

Dynamic factors and electromyographic activity in a sprint start

Directory of Open Access Journals (Sweden)

M Čoh

2009-07-01

Full Text Available The aim of the study was to establish the major dynamic parameters as well as the EMG activation of muscles in a sprint start as the first derivative of sprint velocity. The subject of the analysis was block velocity, the production of force in the front and rear starting blocks, the block acceleration in the first two steps and the electromyographic activity (EMG of the following muscles: the erector spinae muscle, gluteus maximus muscle, rectus femoris muscle, vastus medialis muscle, vastus lateralis muscle, biceps femoris muscle and gastrocnemius–medialis muscle. One international-class female sprinter participated in the experiment. She performed eight starts in constant laboratory conditions. The 3-D kinematic analysis was made using a system of nine Smart-e 600 cameras operating at a frame rate of 60 Hz. Dynamic parameters were established by means of two separate force platforms to which the starting blocks were fixed. A 16-channel electromyograph was used to analyse electromyographic activity (EMG. It was established that the block velocity depended on the absolute force produced in the front and rear starting blocks and that it was 2.84±0.21 m.s-1. The maximal force on the rear and front blocks was 628±34 N and 1023±30 N, respectively. In view of the total impulse (210±11 Ns the force production/time ratio in the rear and front blocks was 34%:66%. The erector spinae muscle, vastus lateralis muscle and gastrocnemius–medialis muscle generate the efficiency of the start. The block acceleration in the first two steps primarily depends on the activation of the gluteus maximus muscle, rectus femoris muscle, biceps femoris muscle and gastrocnemius–medialis muscle. A sprint start is a complex motor stereotype requiring a high degree of integration of the processes of central movement regulation and an optimal level of biomotor abilities.

Teaching iSTART to Understand Spanish

Science.gov (United States)

Dascalu, Mihai; Jacovina, Matthew E.; Soto, Christian M.; Allen, Laura K.; Dai, Jianmin; Guerrero, Tricia A.; McNamara, Danielle S.

2017-01-01

iSTART is a web-based reading comprehension tutor. A recent translation of iSTART from English to Spanish has made the system available to a new audience. In this paper, we outline several challenges that arose during the development process, specifically focusing on the algorithms that drive the feedback. Several iSTART activities encourage…

Soft-Starting Power-Factor Motor Controller

Science.gov (United States)

Nola, F. J.

1983-01-01

Three-phase power-factor controller with soft start is based on earlier version that does not control starting transients. Additional components serve to turn off "run" command signal and substitute gradual startup command signal during preset startup interval. Improved controller reduces large current surge that usually accompanies starting. Controller applies power smoothly, without causing motor vibrations.

46 CFR 112.50-3 - Hydraulic starting.

Science.gov (United States)

2010-10-01

... POWER SYSTEMS Emergency Diesel and Gas Turbine Engine Driven Generator Sets § 112.50-3 Hydraulic starting. A hydraulic starting system must meet the following: (a) The hydraulic starting system must be a... 46 Shipping 4 2010-10-01 2010-10-01 false Hydraulic starting. 112.50-3 Section 112.50-3 Shipping...

Both bias and lack of knowledge influence organizational focus on first case of the day starts.

Science.gov (United States)

Dexter, Elisabeth U; Dexter, Franklin; Masursky, Danielle; Garver, Michael P; Nussmeier, Nancy A

2009-04-01

The economic costs of reducing first case delays are often high, because efforts need to be applied to multiple operating rooms (ORs) simultaneously. Nevertheless, delays in starting first cases of the day are a common topic in OR committee meetings. We added three scientific questions to a 24 question online, anonymous survey performed before the implementation of a new OR information system. The 57 respondents cared sufficiently about OR management at the United States teaching hospital to complete all questions. The survey revealed reasons why personnel may focus on the small reductions in nonoperative time achievable by reducing tardiness in first cases of the day. (A) Respondents lacked knowledge about principles in reducing over-utilized OR time to increase OR efficiency, based on their answering the relevant question correctly at a rate no different from guessing at random. Those results differed from prior findings of responses at a rate worse than random, resulting from a bias on the day of surgery of making decisions that increase clinical work per unit time. (B) Most respondents falsely believed that a 10 min delay at the start of the day causes subsequent cases to start at least 10 min late (P less time than scheduled (P = 0.008 versus chance). No one who demonstrated knowledge (C) about cases sometimes taking less time than scheduled applied that information to their response to (B) regarding cases starting late (P = 0.0002). Knowledge of OR efficiency was low among the respondents working in ORs. Nevertheless, the apparent absence of bias shows that education may influence behavior. In contrast, presence of bias on matters of tardiness of start times shows that education may be of no benefit. As the latter results match findings of previous studies of scheduling decisions, interventions to reduce patient and surgeon waiting from start times may depend principally on the application of automation to guide decision-making.

Study and application of digital physical start-up system for nuclear reactor

International Nuclear Information System (INIS)

Qu Ronghong; Li Baoxiang; Xu Xiaolin

2004-01-01

The digital physical start-up system for nuclear reactor is introduced. The system was used successfully in physical start-up experiment of 10 MW high-temperature gas-cooled reactor. It is proved practically that the system not only runs reliably and calculates both rapidly and correctly and relieves the loads of operators, but also has the better characters of monitoring and showing the real-time results of experiments than the analog systems. (author)

Test operation of a real-time tsunami inundation forecast system using actual data observed by S-net

Science.gov (United States)

Suzuki, W.; Yamamoto, N.; Miyoshi, T.; Aoi, S.

2017-12-01

If the tsunami inundation information can be rapidly and stably forecast before the large tsunami attacks, the information would have effectively people realize the impeding danger and necessity of evacuation. Toward that goal, we have developed a prototype system to perform the real-time tsunami inundation forecast for Chiba prefecture, eastern Japan, using off-shore ocean bottom pressure data observed by the seafloor observation network for earthquakes and tsunamis along the Japan Trench (S-net) (Aoi et al., 2015, AGU). Because tsunami inundation simulation requires a large computation cost, we employ a database approach searching the pre-calculated tsunami scenarios that reasonably explain the observed S-net pressure data based on the multi-index method (Yamamoto et al., 2016, EPS). The scenario search is regularly repeated, not triggered by the occurrence of the tsunami event, and the forecast information is generated from the selected scenarios that meet the criterion. Test operation of the prototype system using the actual observation data started in April, 2017 and the performance and behavior of the system during non-tsunami event periods have been examined. It is found that the treatment of the noises affecting the observed data is the main issue to be solved toward the improvement of the system. Even if the observed pressure data are filtered to extract the tsunami signals, the noises in ordinary times or unusually large noises like high ocean waves due to storm affect the comparison between the observed and scenario data. Due to the noises, the tsunami scenarios are selected and the tsunami is forecast although any tsunami event does not actually occur. In most cases, the selected scenarios due to the noises have the fault models in the region along the Kurile or Izu-Bonin Trenches, far from the S-net region, or the fault models below the land. Based on the parallel operation of the forecast system with a different scenario search condition and

Application of intelligent soft start in asynchronous motor

Science.gov (United States)

Du, Xue; Ye, Ying; Wang, Yuelong; Peng, Lei; Zhang, Suying

2018-05-01

The starting way of three phase asynchronous motor has full voltage start and step-down start. Direct starting brings large current impact, causing excessive local temperature to the power grid and larger starting torque will also impact the motor equipment and affect the service life of the motor. Aim at the problem of large current and torque caused by start-up, an intelligent soft starter is proposed. Through the application of intelligent soft start on asynchronous motor, highlights its application advantage in motor control.

Changing Incidence and Risk Factors for Kaposi Sarcoma by Time Since Starting Antiretroviral Therapy: Collaborative Analysis of 21 European Cohort Studies

NARCIS (Netherlands)

Wyss, Natascha; Zwahlen, Marcel; Clifford, Gary; Campbell, Maria; Chakraborty, Rana; Bonnet, Fabrice; Chene, Geneviève; Bani-Sadr, Firouze; Verbon, Annelies; Zangerle, Robert; Paparizos, Vassilios; Prins, Maria; Dronda, Fernando; Le Moing, Vincent; Antinori, Andrea; Quiros-Roldan, Eugenia; Mussini, Cristina; Miro, Jose M.; Meyer, Laurence; Vehreschild, Janne; Obel, Niels; Mocroft, Amanda; Brockmeyer, Norbert; Boue, François; Sabin, Caroline; Spagnuolo, Vincenzo; Hasse, Barbara; de Wit, Stéphane; Roca, Bernardino; Egger, Matthias; Bohlius, Julia

2016-01-01

Kaposi sarcoma (KS) remains a frequent cancer in human immunodeficiency virus (HIV)-positive patients starting combination antiretroviral therapy (cART). We examined incidence rates and risk factors for developing KS in different periods after starting cART in patients from European observational

A fast-start pacing strategy speeds pulmonary oxygen uptake kinetics and improves supramaximal running performance.

Directory of Open Access Journals (Sweden)

Tiago Turnes

Full Text Available The focus of the present study was to investigate the effects of a fast-start pacing strategy on running performance and pulmonary oxygen uptake (VO2 kinetics at the upper boundary of the severe-intensity domain. Eleven active male participants (28±10 years, 70±5 kg, 176±6 cm, 57±4 mL/kg/min visited the laboratory for a series of tests that were performed until exhaustion: 1 an incremental test; 2 three laboratory test sessions performed at 95, 100 and 110% of the maximal aerobic speed; 3 two to four constant speed tests for the determination of the highest constant speed (HS that still allowed achieving maximal oxygen uptake; and 4 an exercise based on the HS using a higher initial speed followed by a subsequent decrease. To predict equalized performance values for the constant pace, the relationship between time and distance/speed through log-log modelling was used. When a fast-start was utilized, subjects were able to cover a greater distance in a performance of similar duration in comparison with a constant-pace performance (constant pace: 670 m±22%; fast-start: 683 m±22%; P = 0.029; subjects also demonstrated a higher exercise tolerance at a similar average speed when compared with constant-pace performance (constant pace: 114 s±30%; fast-start: 125 s±26%; P = 0.037. Moreover, the mean VO2 response time was reduced after a fast start (constant pace: 22.2 s±28%; fast-start: 19.3 s±29%; P = 0.025. In conclusion, middle-distance running performances with a duration of 2-3 min are improved and VO2 response time is faster when a fast-start is adopted.

START-UP FINANCING SOURCES: DOES GENDER MATTER? SOME EVIDENCE FOR EU AND ROMANIA

Directory of Open Access Journals (Sweden)

Badulescu Alina

2011-07-01

Full Text Available Although financial resources are very important in SMEs in general, and for start-ups in particular, many entrepreneurs face numerous restrictions in finding sources for start-up financing. The present article aims to investigate the similarities or differences in start-up financing sources due to gender issues, otherwise to investigate if female entrepreneurs use (or have access different financial sources in the early stage of their business. As reported by the literature, access to finance is one of the most important issues for SMEs and nascent entrepreneurs. Moreover, among the main financial issues, the first one is the access to start-up finance (Schwartz, 1976; Carter and Cannon, 1992; Johnson and Storey, 1993; Koper, 1993; Van Auken et al, 1993; Carter and Rosa, 1998, FOBS survey 2005. In all sectors, women use for starting up businesses substantially less capital then men. Women encounter, more then men, credibility problems when dealing with bankers. This problem causes important effects concerning the performance, survival and growth of women-run businesses. The present research focuses on revealing how male and female entrepreneurs face and solve the problem of start-up financing sources. The methodology is based on using the dataset "Enterprises managed by the founder - broken down by gender of the entrepreneur", available in EUROSTAT database. The data selected refers to the start-up financing sources available for European Union and Romania, regarding activities included in NACE: Industry and services excluding public administration and management activities of holding companies and 2005 as time of reference. The data were used to make some comparison between: male versus female entrepreneurs in EU; male versus female entrepreneurs in Romania; EU entrepreneurs versus Romanian entrepreneurs. The main findings reveal that there are no significant differences between men and women concerning the start-up financing sources. The main

FUEL SUPPLY IN ACCUMULATOR DIESEL SYSTEMS WITH ELECTRONIC CONTROL AT STARTING REGIME

Directory of Open Access Journals (Sweden)

G. M. Kuharenok

2009-01-01

Full Text Available The paper contains review and analysis of fuel supply process in accumulator diesel systems with electronic control at starting regime. The necessity has been shown to  develop and use programs of mathematic simulation pertaining to fuel supply processes with the purpose to decrease number of bench tests and time period required for a fuel system adaptation. The paper cites results of practical investigations on starting engines  equipped with the mentioned-above systems.

Dynamic Modeling of Starting Aerodynamics and Stage Matching in an Axi-Centrifugal Compressor

Science.gov (United States)

Wilkes, Kevin; OBrien, Walter F.; Owen, A. Karl

1996-01-01

A DYNamic Turbine Engine Compressor Code (DYNTECC) has been modified to model speed transients from 0-100% of compressor design speed. The impetus for this enhancement was to investigate stage matching and stalling behavior during a start sequence as compared to rotating stall events above ground idle. The model can simulate speed and throttle excursions simultaneously as well as time varying bleed flow schedules. Results of a start simulation are presented and compared to experimental data obtained from an axi-centrifugal turboshaft engine and companion compressor rig. Stage by stage comparisons reveal the front stages to be operating in or near rotating stall through most of the start sequence. The model matches the starting operating line quite well in the forward stages with deviations appearing in the rearward stages near the start bleed. Overall, the performance of the model is very promising and adds significantly to the dynamic simulation capabilities of DYNTECC.

46 CFR 112.50-7 - Compressed air starting.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Compressed air starting. 112.50-7 Section 112.50-7... air starting. A compressed air starting system must meet the following: (a) The starting, charging... air compressors addressed in paragraph (c)(3)(i) of this section. (b) The compressed air starting...

Factors determining when to start levodopa/carbidopa/entacapone treatment in Spanish patients with Parkinson's disease.

Science.gov (United States)

Martínez-Martín, P; Hernández, B; Ricart, J

2014-04-01

Several therapeutic options are available for the symptomatic treatment of Parkinson's disease (PD).There is no reliable information about which factors are involved in the choice of treatment. To identify factors contributing to the decision to start treatment with levodopa/carbidopa/entacapone (LCE) in patients with PD. We completed a descriptive cross-sectional retrospective multicentre study of patients with idiopathic PD receiving LCE. Clinical data were collected with special attention to factors that could potentially determine when to initiate treatment with LCE in normal clinical practice. We studied 1050 patients with a mean age of 71.3±8.7 years (58.2% men). Average time from onset of symptoms to diagnosis was 13.8±12.9 months, with a latency time of 74.5±53.6 months before starting LCE treatment. The most common initial symptoms were tremor (70.6%), reduced dexterity (43.2%) and slowness of movement (41.5%). At the start of LCE treatment, most patients were in Hoehn and Yahr stage 2 (57.5%), with an average rating of 73.4% on the Schwab & England scale. Eight hundred twenty two patients (78.3%) received treatment with other drugs before starting LCE (mean time between starting any PD treatment and starting LCE was 40.5±47.2 months). Clinical factors with a moderate, marked, or crucial effect on the decision to start LCE treatment were bradykinesia (84.7%), daytime rigidity (72.2%), general decline (72.2%), difficulty walking (66.4%), tremor (62.7%), nocturnal rigidity (56.1%), and postural instability (53%). Difficulty performing activities of daily living was the only psychosocial factor identified as having an influence on the decision (84.3%). The decision to start patients with idiopathic PD on LCE treatment is mainly determined by motor deficits and disabilities associated with disease progression. Copyright © 2012 Sociedad Española de Neurología. Published by Elsevier Espana. All rights reserved.

Technological start of T-15 tokamak. The start-up diagnostic complex

International Nuclear Information System (INIS)

Notkin, G.E.

1989-01-01

The T-15 tokamak with superconducting toroidal winding reached the technological start-up phase. The results of the first operating tests of the main tokamak components are reported. Due to improper function of both the vacuum and the cryogenic system, the nominal parameters of the vacuum and of the toroidal magnetic field have not been achieved. The non-optimum vacuum conditions made the discharge start-up difficult even when a pre-ionizing electron beam and a gyrotron generator were used. The pre-discharge plasma parametes were studied by means of a limited set of plasma diagnostic apparatus. Due to substantially deteriorated vacuum conditions, it was not possible to repeat the only one successful discharge with a current of 100 kA, lasting for 50 ms. (J.U.)

Start-up assist by magnetized plasma flow injection in TPE-RX reversed-field pinch

Energy Technology Data Exchange (ETDEWEB)

Asai, T. [College of Science and Technology, Nihon University, 1-8 Kanda-Surugadai, Chiyoda-ku, Tokyo 101-8308 (Japan)]. E-mail: asai@phys.cst.nihon-u.ac.jp; Nagata, M. [Graduate School of Engineering, University of Hyogo, Himeji (Japan); Koguchi, H. [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba (Japan); Hirano, Y. [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba (Japan); Sakakita, H. [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba (Japan); Yambe, K. [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba (Japan); Kiyama, S. [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba (Japan)

2006-11-15

A reversed-field pinch (RFP) start-up assisted by a magnetized plasma flow injection was demonstrated for the first time on a TPE-RX machine. This sequence of experiments aimed to establish a new method of ionization, gas-fill and helicity injection in the start-up phase of an RFP. In this start-up method, magnetized and well-ionized plasma is formed by a magnetized coaxial plasma gun and injected into the torus chamber as an initial pre-ionized plasma for RFP formation. In the initial experiments, attenuated density pump-out and comparatively slow decay of the toroidal flux and plasma current were observed as evidence of its being an effective start-up method.

CwicStart - a proof-of-concept client for the CEOSWGISS Integrated Catalog (CWIC)

Science.gov (United States)

Newman, D. J.; Mitchell, A. E.

2012-12-01

Keywords - Earth Science, data discovery, agile development, ruby on rails, catalog, OGC Audience - Earth Science application developers What is CwicStart CwicStart is a prototypical earth science data discovery web application designed, developed and hosted by NASA's Earth Observing System (EOS) Clearinghouse (ECHO). CwicStart searches the CEOS WGISS Integrated Catalog (CWIC) to provide users with dataset and granule level metadata from sources as diverse as NASA, NOAA, INPE and AOE. CwicStart demonstrates the ease of which it is possible to stand up a functioning client against the CWIC. From start to finish, CwicStart was designed, developed and deployed in one month. Built from OGC getCapabilities document of CWIC The CwicStart application takes the OGC getCapabilities (http://www.opengeospatial.org/standards/is) document describing CWIC, as it's starting point for providing a user interface suitable for interrogating CWIC. Consequently, it can allow the user to constrain their search by the following criteria, - Generic search terms - Spatial bounding box - Start date/time and end date/time - ISO-queryable key-value pairs User Interface inspired by Reverb ECHO's state-of-the-art earth science discovery tool, Reverb (http://reverb.echo.nasa.gov) was used as a guideline for the user interface components of CwicStart. It incorporates OpenLayers to provide point-and-click spatial constraint specification and calendar input for temporal constraints. Discovery involves two phases: dataset discovery and granule discovery with full pagination support for large results sets. CwicStart supports 'graceful degradation' of support for multiple browsers and accessibility requirements. Implemented in Ruby on Rails for Agile Development CwicStart is implemented in Ruby on Rails, a dynamic, rapid development language and environment that facilitates Agile development and is resilient to changing requirements. Using an Agile development methodology ECHO was able to stand up the

Changes in Cardiovascular Disease Risk Factors With Immediate Versus Deferred Antiretroviral Therapy Initiation Among HIV-Positive Participants in the START (Strategic Timing of Antiretroviral Treatment) Trial

DEFF Research Database (Denmark)

Baker, Jason V; Sharma, Shweta; Achhra, Amit C

2017-01-01

INTRODUCTION: HIV infection and certain antiretroviral therapy (ART) medications increase atherosclerotic cardiovascular disease risk, mediated, in part, through traditional cardiovascular disease risk factors. METHODS AND RESULTS: We studied cardiovascular disease risk factor changes in the START...... (Strategic Timing of Antiretroviral Treatment) trial, a randomized study of immediate versus deferred ART initiation among HIV-positive persons with CD4+ cell counts >500 cells/mm3. Mean change from baseline in risk factors and the incidence of comorbid conditions were compared between groups....... The characteristics among 4685 HIV-positive START trial participants include a median age of 36 years, a CD4 cell count of 651 cells/mm3, an HIV viral load of 12 759 copies/mL, a current smoking status of 32%, a median systolic/diastolic blood pressure of 120/76 mm Hg, and median levels of total cholesterol of 168 mg...

Influence of physical development on start and countermovement jump performance in adolescent sprint athletes.

Science.gov (United States)

Aerenhouts, D; Debaere, S; Hagman, F; Van Gheluwe, B; Delecluse, C; Clarys, P

2013-02-01

The aim of the present study was to describe the effect of physical changes during adolescence on sprint start and countermovement jump (CMJ) performance. Twenty-eight girls and 25 boys (15.0±1.6 and 14.7±1.9 years at start respectively) were measured twice with a one year interval. Anthropometric data allowed skeletal muscle mass (SMM) estimation. Athletes performed a 10m sprint tracked from behind by a laser sensor, with starting blocks measuring propulsion forces. CMJ's were performed on a Kistler force plate. Between the two measurement occasions both genders increased in body height, weight and SMM. In girls and boys, impulse during the push-off, block leaving velocity and times at 5 and 10 m improved significantly. In both genders CMJ absolute power increased but not power.kg-1. Only in boys a higher CMJ was registered on occasion 2. For both genders on both occasions, impulse during the push-off correlated with body weight, SMM and CMJ power (r from .46 to .84), and in boys also with CMJ height and CMJ power.kg-1 (r from 0.43 to 0.76). Boys showed CMJ height and power to correlate with 5 and 10 m times (r from -0.42 to -0.79) and with block leaving velocity, however only on the first data collection (r=0.61 and 0.59, respectively). Sprint start performance is only partly related to muscular development and CMJ could predict start performance in boys only. Sprint start and CMJ rely on technical skills and, therefore, increasing muscularity should be accompanied with sufficient specific training to allow an optimal transfer to start performance.

Impact of reactor configuration on anammox process start-up: MBR versus SBR.

Science.gov (United States)

Tao, Yu; Gao, Da-Wen; Fu, Yuan; Wu, Wei-Min; Ren, Nan-Qi

2012-01-01

Anaerobic ammonium oxidation (anammox) is an energy saving biological nitrogen removal process which was limited to slow growth rate of anammox bacteria during start-up period. This study investigated the start-up of anammox process by a laboratory sequential batch reactor (SBR) for 218 days and subsequently modified the reactor as a membrane bioreactor (MBR) for 178 days. Modification of a SBR as MBR with installation of an external membrane module resulted in acceleration of specific anammox activity by 19 times. The acceleration of specific anammox activity with MBR was further confirmed by starting-up another MBR for a 242 day period. Molecular microbial analyses showed that Candidatus "Brocadia anammoxidans" and Candidatus "Kuenenia stuttgartiensis" were the dominant species in the inocula and biomass developed in the reactor. The start-up with MBR appeared to be more effective than SBR for the enrichment of anammox bacteria due to high sludge retention property of MBR configuration. Copyright © 2011 Elsevier Ltd. All rights reserved.

Starting a business through a franchise

OpenAIRE

Dubravka Mahaček; Maja Martinko Lihtar

2013-01-01

A business can be launched by establishing a new entity, purchasing an existing entity or through a franc - hise. There are certain prerequisites for starting a business, the most important ones being a quality idea and start-up capital. Potential start-up difficulties are inadequate financing, existing competition as well as the process of building your own market position. By purchasing an existing business some risks may be avoided and the opportunity for gaining profit may ...

Parent Involvement in Head Start and Children's Development: Indirect Effects Through Parenting.

Science.gov (United States)

Ansari, Arya; Gershoff, Elizabeth

2016-04-01

The authors examined the extent to which parent involvement in Head Start programs predicted changes in both parent and child outcomes over time, using a nationally representative sample of 1,020 three-year-old children over 3 waves of the Family and Child Experiences Survey. Center policies that promote involvement predicted greater parent involvement, and parents who were more involved in Head Start centers demonstrated increased cognitive stimulation and decreased spanking and controlling behaviors. In turn, these changes in parenting behaviors were associated with gains in children's academic and behavioral skills. These findings suggest that Head Start programs should do even more to facilitate parent involvement because it can serve as an important means for promoting both parent and child outcomes.

Physics of energetic particle-driven instabilities in the START spherical tokamak

International Nuclear Information System (INIS)

McClements, K.G.; Gryaznevich, M.P.; Akers, R.J.; Appel, L.C.; Counsell, G.F.; Roach, C.M.; Sharapov, S.E.; Majeski, R.

1999-01-01

The recent use of neutral beam injection (NBI) in the UKAEA small tight aspect ratio tokamak (START) has provided the first opportunity to study experimentally the physics of energetic ions in spherical tokamak (ST) plasmas. In such devices the ratio of major radius to minor radius R 0 /a is of order unity. Several distinct classes of NBI-driven instability have been observed at frequencies up to 1 MHz during START discharges. These observations are described, and possible interpretations are given. Equilibrium data, corresponding to times of beam-driven wave activity, are used to compute continuous shear Alfven spectra: toroidicity and high plasma beta give rise to wide spectral gaps, extending up to frequencies of several times the Alfven gap frequency. In each of these gaps Alfvenic instabilities could, in principle, be driven by energetic ions. Chirping modes observed at high beta in this frequency range have bandwidths comparable to or greater than the gap widths. Instability drive in START is provided by beam ion pressure gradients (as in conventional tokamaks), and also by positive gradients in beam ion velocity distributions, which arise from velocity-dependent charge exchange losses. It is shown that fishbone-like bursts observed at a few tens of kHz can be attributed to internal kink mode excitation by passing beam ions, while narrow-band emission at several hundred kHz may be due to excitation of fast Alfven (magnetosonic) eigenmodes. In the light of our understanding of energetic particle-driven instabilities in START, the possible existence of such instabilities in larger STs is discussed. (author)

THE EFFECTS OF THREE DIFFERENT REAR KNEE ANGLES ON KINEMATICS IN THE SPRINT START

Directory of Open Access Journals (Sweden)

C. Milanese

2014-08-01

Full Text Available The purpose of this study was to investigate the rear knee angle range in the set position that allows sprinters to reach greater propulsion on the rear block during the sprint start. Eleven university-track team sprinters performed the sprint start using three rear knee angle conditions: 90°, 115° and 135°. A motion capture system consisting of 8 digital cameras (250 Hz was used to record kinematic parameters at the starting block phase and the acceleration phase. The following variables were considered: horizontal velocity of the centre of mass (COM, COM height, block time, pushing time on the rear block, percentage of pushing time on the rear block, force impulse, push-off angle and length of the first two strides. The main results show that first, horizontal block velocity is significantly greater at 90° vs 115° and 135° rear knee angle (p<0.05 and p<0.001 respectively at block clearance and the first two strides; second, during the pushing phase, the percentage of pushing time of the rear leg is significantly greater at 90° vs 135° rear knee angle (p<0.01. No significant difference was found for block time among the conditions. These results indicate that block velocity is the main kinematic parameter affected by rear knee angle during the starting block phase and acceleration phase. Furthermore, the 90° rear knee angle allows for a better push-off of the rear leg than larger angles at the set position. The findings of this study provide some direction and useful practical advice in defining an efficient rear leg biomechanical configuration at the set position.

INTENSITY SETTER FOR A DEVICE OF SMOOTH START OF SUBMERSIBLE PUMP ELECTRIC MOTOR

Directory of Open Access Journals (Sweden)

V.I. Lobov

2016-06-01

Full Text Available Purpose. Development of an intensity setter, which in a rational law changes the opening thyristor the voltage regulator and effectively to changing power supply voltage stator windings of the electric pump deepening, ensuring a smooth start in a wide range. Methodology. Electric submersible pump belongs to the small inertia electric, since it is not significant total moment of inertia, not exceeding two moments of inertia of the motor and static moment on the shaft does not exceed forty percent of the nominal torque. For technical requirements that electric acceleration time should have no less than twenty seconds or more. Office starting modes of electric submersible pumps economically justified using thyristor voltage regulator by forming the dial changes the intensity of the necessary legislation in time voltage feeding the stator windings. This ensures a smooth start right rotor of the electric submersible pump. Results. A block diagram of the intensity setter that is: with control unit, two units that form the exponential voltage supply emitter follower and regulatory elements. The mathematical expressions for voltage at the stator windings of the motor, changing exponentially, opening the angle of thyristor power unit thyristor the voltage regulator, which is determined through the initial angle of opening. Provided formula for pick-up voltage and minimum voltage, time constants, which are determined from the basic equations of motion and mechanical characteristics of the electric motor. Analytical investigated by the voltage dependence violation by changing the time constant flowing and growing exhibitor supply voltage stator electric circuit deepening pump. Originality. Proposed in the initial time on the stator windings of the electric pick-up voltage is applied. Under the influence of this voltage, motor rotor begins to accelerate. At the same time, pick-up voltage decreases the minimum startup voltage varies exponentially in which

Lean Start-up in Established Companies

DEFF Research Database (Denmark)

Goduscheit, René Chester

2018-01-01

Lean start-up is an emergent perspective on how entrepreneurs can bring new products and services to the market. This approach challenges the dominant role of lengthy business plans, linear product development processes, and seeking complete overview of the potential of the new products....../services before market launch. Instead it suggests that start-ups could benefit from a ‘minimum-viable product’ approach where products and services are launched when they contain critical features. The emphasis in the lean start-up approach is on business models rather than the elaborate business plan...... at the companies (strategy meetings, development workshops etc.). The aim is to shed light on the implications for companies that seek to employ lean start-up. These implications will be aimed at aspects like innovation management, organizational structure, customer relations etc....

A fast novel soft-start circuit for peak current-mode DC—DC buck converters

International Nuclear Information System (INIS)

Li Jie; Yang Miao; Sun Weifeng; Lu Xiaoxia; Xu Shen; Lu Shengli

2013-01-01

A fully integrated soft-start circuit for DC—DC buck converters is presented. The proposed high speed soft-start circuit is made of two sections: an overshoot suppression circuit and an inrush current suppression circuit. The overshoot suppression circuit is presented to control the input of the error amplifier to make output voltage limit increase in steps without using an external capacitor. A variable clock signal is adopted in the inrush current suppression circuit to increase the duty cycle of the system and suppress the inrush current. The DC—DC converter with the proposed soft-start circuit has been fabricated with a standard 0.13 μm CMOS process. Experimental results show that the proposed high speed soft-start circuit has achieved less than 50 μs start-up time. The inductor current and the output voltage increase smoothly over the whole load range. (semiconductor integrated circuits)

Correlation between fuel rack sticking and unintentional re-starting of EDG

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Cheol; Chung, Woo geun; Kang, Seung Hee; Kim, Myeong hoon [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

The Emergency Diesel Generator (EDG) was being tested after overhaul maintenance. While the EDG was running at the rated speed (450 rpm), an operator pressed the manual stop button. But the EDG failed to stop and unintentionally started again. After the unintentional re-start, the EDG maintained running speed of 340 rpm. In the category of a governing system, this paper analyzes the cause of unintentional restart of the EDG that unintentionally re-started and maintained a speed at 340 rpm. The results of the analysis were then verified by a test run. Finally, we identified a correlation between fuel rack sticking and unintentional re-starting of the EDG. An analysis was conducted to confirm the cause of an EDG which was unintentionally restarting and running at 340rpm (rated speed is 450 rpm). Through a test run, it was confirmed that the results of the analysis are correct. The cause of the EDG unintentionally restarting was that it still rotated at 55 rpm over the minimum starting speed at the moment when the shutdown cylinder stopped blocking the fuel, because of a stuck fuel rack at the R7 cylinder. At the same time, the fuel that had been supplied into the cylinders (combustion chamber) by the governing system exploded and the EDG restarted unintentionally.

START: an advanced radiation therapy information system.

Science.gov (United States)

Cocco, A; Valentini, V; Balducci, M; Mantello, G

1996-01-01

START is an advanced radiation therapy information system (RTIS) which connects direct information technology present in the devices with indirect information technology for clinical, administrative, information management integrated with the hospital information system (HIS). The following objectives are pursued: to support decision making in treatment planning and functional and information integration with the rest of the hospital; to enhance organizational efficiency of a Radiation Therapy Department; to facilitate the statistical evaluation of clinical data and managerial performance assessment; to ensure the safety and confidentiality of used data. For its development a working method based on the involvement of all operators of the Radiation Therapy Department, was applied. Its introduction in the work activity was gradual, trying to reuse and integrate the existing information applications. The START information flow identifies four major phases: admission, visit of admission, planning, therapy. The system main functionalities available to the radiotherapist are: clinical history/medical report linking function; folder function; planning function; tracking function; electronic mail and banner function; statistical function; management function. Functions available to the radiotherapy technician are: the room daily list function; management function: to the nurse the following functions are available: patient directing function; management function. START is a departmental client (pc-windows)-server (unix) developed on an integrated database of all information of interest (clinical, organizational and administrative) coherent with the standard and with a modular architecture which can evolve with additional functionalities in subsequent times. For a more thorough evaluation of its impact on the daily activity of a radiation therapy facility, a prolonged clinical validation is in progress.

Shippingport Station Decommissioning Project Start of Physical Decommissioning

International Nuclear Information System (INIS)

Crimi, F. P.

1987-01-01

The Shippingport Atomic Power Station consists of the nuclear steam supply system and associated radioactive waste processing systems, which are owned by the United States Department of Energy, and the turbine-generator and balance of plant, which is owned by the Duquesne Light Company. The station is located at Shippingport, Pennsylvania on seven acres of land leased by DOE from Duquesne Light Company. The Shippingport Station Decommissioning Project is being performed under contract to the DOE by the General Electric Company and its integrated subcontractor, Morrison-Knudsen Company. as the Decommissioning Operations Contractor. This paper describes the current status of the physical decommissioning work, which started September 1985. The preparations required to start a major decommissioning work effort in a safe and cost effective manner are discussed including the development and implementation of a cost/schedule control system. The detailed plan required to ensure that people, property, and procedures are ready in sufficient time to support the start of physical decommissioning is also discussed. The total estimated cost of the Shippingport Station Decommissioning Project should be $98.3 M, with the Project scheduled for completion in April 1990. As the decommissioning of the first commercial-scale nuclear power plant, the Shippingport Project is expected to set the standard for safe, cost-effective demolition of nuclear plants

An impressive start

CERN Multimedia

2011-01-01

This has been an excellent week for the LHC, with a succession of fills rapidly increasing the number of proton bunches to 194 per beam. This has allowed the experiments to reach a peak luminosity of 2.5 × 1032 cm-2s-1, thereby surpassing the record for 2010 where we reached 2.0 × 1032 cm-2s-1. At the time of writing, the integrated luminosity delivered by the LHC in 2011 is around 28 inverse picobarns, which is already more than half of the total 2010 dataset.   These are impressive numbers, but what impresses me most is how quickly the LHC operators are now able to turn the machine around between fills, and how well LHC running has been incorporated into the overall operation of CERN’s accelerator complex. The flexibility of the LHC was illustrated on Thursday when we started a short phase of running at 1.38 TeV per beam, equivalent to the energy-per-nucleon of a lead-ion run. This lower energy data will be used by the experiments, in particular by ALICE, to compare...

Body Composition and Kinematic Analysis of the Grab Start in Youth Swimmers

Directory of Open Access Journals (Sweden)

Alptekin Ahmet

2014-10-01

Full Text Available The purposes of this study were to compare the kinematic variables in youth swimmers during the grab start between sexes and to investigate the relationship between body composition and kinematic variables of the participants. Six female (Mage = 13.71 ± 0.49 yrs and seven male (Mage = 14.00 ± 1.07 yrs swimmers participated in this study. All participants were required to perform grab start tests in random order (three trials by each participant, while the best attempt was analyzed. Nineteen kinematic parameters consisting of block time, flight time, flight distance, total time, total distance, horizontal and vertical displacement of the center of mass (CM at take-off, horizontal and vertical displacement of the CM at entry, height of take-off and entry, relative height of take-off, horizontal and vertical velocity of the CM at take-off, horizontal and vertical velocity of the CM at entry, angle of take-off, angle of entry and angle of knee at block were analyzed. Out of the 19 evaluated kinematic parameters, a statistical difference between the female and male group was found only in the total distance. Therefore, both female and male groups are considered as only one group and merged after analyzing the results. Statistical analysis showed positive and negative correlations between horizontal / vertical velocity of CM at take-off and several kinematic variables (e.g. angle of entry (rhorizontal = -.868, p=.000 / rvertical = .591, p=.02, total distance (rhorizontal = .594, p=.02 / rvertical = .54, p=.04, and height of take-off (rvertical = .888, p=.000, respectively. On the other hand, positive and negative correlations were found between somatotype components and several kinematic variables (e.g. horizontal displacement of CM at entry (rendomorphy = -.626, p=.013, angle of entry (rmesomorphy = -.686, p=.005 / rectomorphy = .52, p=.047, total distance (rendomorphy = -.626, p=.012, and height of take-off (rendomorphy = -.633, p=.011

The influence of gate start position on physical performance and anxiety perception in expert BMX athletes.

Science.gov (United States)

Di Rienzo, Franck; Martinent, Guillaume; Levêque, Lucie; MacIntyre, Tadhg; Collet, Christian; Guillot, Aymeric

2018-02-01

The critical importance of the start phase in bicycle motocross (BMX) racing is increasingly acknowledged. Past experiments underlined that the internal lane of the starting gate provides a strong positional advantage. However, how lane position affects start performance and cognitive and somatic state anxiety remains unexplored. We examined the start performance and anxiety responses of youth national-level BMX riders in both experimental and ecological contexts. We used contextualization motor imagery routines to evaluate start performance and state anxiety from the internal and external lanes. Cycle ergometer measures revealed a better start performance from the external lane, but we did not record any lane effect on actual gate start times. Both somatic and cognitive anxiety scores were higher before racing from the internal compared to the external lane. Finally, state anxiety (i.e., somatic anxiety, worry and concentration disruptions) negatively predicted the start performance. Present findings provide original insights on psychological factors involved in BMX start performance, and might contribute to fruitful coping interventions and training programmes in sports overlapping the framework of "handicap races" taking the specific form of positional advantages/disadvantages at the start (e.g., ski/snowboard cross, athletics, swimming, motorsports, etc.).

Engine cold start analysis using naturalistic driving data: City level impacts on local pollutants emissions and energy consumption.

Science.gov (United States)

Faria, Marta V; Varella, Roberto A; Duarte, Gonçalo O; Farias, Tiago L; Baptista, Patrícia C

2018-07-15

The analysis of vehicle cold start emissions has become an issue of utmost importance since the cold phase occurs mainly in urban context, where most of the population lives. In this sense, this research work analyzes and quantifies the impacts of cold start in urban context using naturalistic driving data. Furthermore, an assessment of the influence of ambient temperature on the percentage of time spent on cold start was also performed. Regarding the impacts of ambient temperature on cold start duration, a higher percentage of time spent on cold start was found for lower ambient temperatures (80% of the time for 0°C and ~50% for 29°C). Results showed that, during cold start, energy consumption is >110% higher than during hot conditions while emissions are up to 910% higher. Moreover, a higher increase on both energy consumption and emissions was found for gasoline vehicles than for diesel vehicles. When assessing the impacts on a city perspective, results revealed that the impacts of cold start increase for more local streets. The main finding of this study is to provide evidence that a higher increase on emissions occurs on more local streets, where most of the population lives. This kind of knowledge is of particular relevance to urban planners in order to perform an informed definition of public policies and regulations to be implemented in the future, to achieve a cleaner and healthier urban environment. Copyright © 2018 Elsevier B.V. All rights reserved.

A Parallel Restoration for Black Start of Microgrids Considering Characteristics of Distributed Generations

Directory of Open Access Journals (Sweden)

Jing Wang

2017-12-01

Full Text Available The black start capability is vital for microgrids, which can potentially improve the reliability of the power grid. This paper proposes a black start strategy for microgrids based on a parallel restoration strategy. Considering the characteristics of distributed generations (DGs, an evaluation model, which is used to assess the black start capability of DGs, is established by adopting the variation coefficient method. Thus, the DGs with good black start capability, which are selected by a diversity sequence method, are restored first in parallel under the constraints of DGs and network. During the selection process of recovery paths, line weight and node importance degree are proposed under the consideration of the node topological importance and the load importance as well as the backbone network restoration time. Therefore, the whole optimization of the reconstructed network is realized. Finally, the simulation results verify the feasibility and effectiveness of the strategy.

Dampak Mentoring Pada Keberhasilan Start-Up Business: Studi Kasus Pada Start-Up Business di Indonesia [Mentoring the Impact of Success of a Start-Up Business: A Case Study of a Start-Up Business in Indonesia

Directory of Open Access Journals (Sweden)

Christina Yanita Setyawati

2016-10-01

Full Text Available Entrepreneurship is a highly developed science today, as well as in the world of education in Indonesia. Teaching entrepreneurship at the university level, especially at some universities in Surabaya, the second largest city in Indonesia, shows the positive impact that there were 74.03% of start-up businesses that survived and thrived in 2014. Based on the previous observation, some business start-ups are accompanied by a mentor. Mentoring is a process of forming and maintaining lasting relationships that develop intensively among seniors with juniors. The mentoring function includes career and psychosocial functions. The main purpose of this research is to study the relationship between mentoring and the success of a start-up business. This study is a quantitative descriptive study using a random sampling method to obtain 100 samples. The tool used to collect data was a questionnaire. The methodology used to analyze the quantitative description to test the hypothesis. The results of this study indicate that mentoring influences the success of a start-up business that was owned by university students in Surabaya, Indonesia by 32% and 78% was influenced by other variables.

Classifier utility modeling and analysis of hypersonic inlet start/unstart considering training data costs

Science.gov (United States)

Chang, Juntao; Hu, Qinghua; Yu, Daren; Bao, Wen

2011-11-01

Start/unstart detection is one of the most important issues of hypersonic inlets and is also the foundation of protection control of scramjet. The inlet start/unstart detection can be attributed to a standard pattern classification problem, and the training sample costs have to be considered for the classifier modeling as the CFD numerical simulations and wind tunnel experiments of hypersonic inlets both cost time and money. To solve this problem, the CFD simulation of inlet is studied at first step, and the simulation results could provide the training data for pattern classification of hypersonic inlet start/unstart. Then the classifier modeling technology and maximum classifier utility theories are introduced to analyze the effect of training data cost on classifier utility. In conclusion, it is useful to introduce support vector machine algorithms to acquire the classifier model of hypersonic inlet start/unstart, and the minimum total cost of hypersonic inlet start/unstart classifier can be obtained by the maximum classifier utility theories.

Health Coordination Manual. Head Start Health Services.

Science.gov (United States)

Administration for Children, Youth, and Families (DHHS), Washington, DC. Head Start Bureau.

Part 1 of this manual on coordinating health care services for Head Start children provides an overview of what Head Start health staff should do to meet the medical, mental health, nutritional, and/or dental needs of Head Start children, staff, and family members. Offering examples, lists, action steps, and charts for clarification, part 2…

The physics of tokamak start-up

International Nuclear Information System (INIS)

Mueller, D.

2013-01-01

Tokamak start-up on present-day devices usually relies on inductively induced voltage from a central solenoid. In some cases, inductive startup is assisted with auxiliary power from electron cyclotron radio frequency heating. International Thermonuclear Experimental Reactor, the National Spherical Torus Experiment Upgrade and JT60, now under construction, will make use of the understanding gained from present-day devices to ensure successful start-up. Design of a spherical tokamak (ST) with DT capability for nuclear component testing would require an alternative to a central solenoid because the small central column in an ST has insufficient space to provide shielding for the insulators in the solenoid. Alternative start-up techniques such as induction using outer poloidal field coils, electron Bernstein wave start-up, coaxial helicity injection, and point source helicity injection have been used with success, but require demonstration of scaling to higher plasma current

University Knowledge Spillovers & Regional Start-up Rates

DEFF Research Database (Denmark)

Hellerstedt, Karin; Wennberg, Karl; Frederiksen, Lars

2014-01-01

how characteristics of the economic and political milieu within each region influence the ratio of firm births. We find that knowledge spillovers from universities and firm-based R&D strongly affect the start-up rates for both high-tech firms and knowledge-intensive services firms. Further, the start......This chapter investigates how regional start-up rates in the knowledge-intensive services and high-tech industries are influenced by knowledge spillovers from both universities and firm-based R&D activities. Integrating insights from economic geography and organizational ecology into the literature......-up rate of knowledge-intensive service firms is tied more strongly to the supply of university educated individuals and the political regulatory regime within the municipality than start-ups in high-tech industries. This suggests that knowledge-intensive service-start-ups are more susceptible to both...

Making a Simple Self-Starting Electric Motor

Science.gov (United States)

Hong, Seok-In; Choi, Jung-In; Hong, Seok-Cheol

2009-01-01

A simple electric motor has a problem in that the current applied to the motor per se can rarely trigger its rotation. Usually such motors begin to rotate after the rotor is slightly turned by hand (i.e., manual starting). In a "self-starting" motor, the rotor starts to rotate spontaneously as soon as the current is applied. This paper describes…

Modelling ohmic confinement experiments on the START tokamak

International Nuclear Information System (INIS)

Roach, C.M.

1996-05-01

Ohmic confinement data from the tight aspect ratio tokamak START has been analysed using the ASTRA transport simulation code. Neoclassical expressions have been modified to describe tight aspect ratio configurations, and the comparison between START data and models of anomalous transport has been made quantitative using the standard χ 2 test from statistics. Four confinement models (T11, Rebut-Lallia-Watkins, Lackner-Gottardi, and Taroni et al's Bohm model) have been compared with the START data. Three of the models are found to simulate START's electron temperature data moderately well, while Taroni et al's Bohm model overestimates electron temperatures in START by an order of magnitude. Thus comparison with START data tends to discriminate against Bohm models; these models are pessimistic or ITER. (author)

Assessing the impact of a targeted plyometric training on changes in selected kinematic parameters of the swimming start.

Science.gov (United States)

Rejman, Marek; Bilewski, Marek; Szczepan, Stefan; Klarowicz, Andrzej; Rudnik, Daria; Maćkała, Krzysztof

2017-01-01

The aim of this study was to analyse changes taking place within selected kinematic parameters of the swimming start, after completing a six-week plyometric training, assuming that the take-off power training improves its effectiveness. The experiment included nine male swimmers. In the pre-test the swimmers performed three starts focusing on the best performance. Next, a plyometric training programme, adapted from sprint running, was introduced in order to increase a power of the lower extremities. The programme entailed 75 minute sessions conducted twice a week. Afterwards, a post-test was performed, analogous to the pre-test. Spatio-temporal structure data of the swimming start were gathered from video recordings of the swimmer above and under water. Impulses triggered by the plyometric training contributed to a shorter start time (the main measure of start effectiveness) and glide time as well as increasing average take-off, flight and glide velocities including take-off, entry and glide instantaneous velocities. The glide angle decreased. The changes in selected parameters of the swimming start and its confirmed diagnostic values, showed the areas to be susceptible to plyometric training and suggested that applied plyometric training programme aimed at increasing take-off power enhances the effectiveness of the swimming start.

Random start ovarian stimulation for fertility preservation appears unlikely to delay initiation of neoadjuvant chemotherapy for breast cancer.

Science.gov (United States)

Letourneau, Joseph M; Sinha, Nikita; Wald, Kaitlyn; Harris, Eve; Quinn, Molly; Imbar, Tal; Mok-Lin, Evelyn; Chien, A Jo; Rosen, Mitchell

2017-10-01

Is random start ovarian stimulation associated with delays in initiation of neoadjuvant chemotherapy for breast cancer? Among women who complete fertility preservation (FP) consultation, random start ovarian stimulation is unlikely to delay time to initiation of neoadjuvant chemotherapy start. Neoadjuvant chemotherapy is now a widely accepted treatment modality for operable breast cancer and random start ovarian stimulation is an increasingly-utilized modality for FP. While conventional ovarian stimulation does not appear to delay starting adjuvant chemotherapy, the relationship between random start ovarian stimulation and neoadjuvant chemotherapy start is not well-understood. Cross-sectional study of all women seen between from January 2011 to April 2017 for FP consultation prior to starting neoadjuvant chemotherapy for breast cancer. A chart-review was performed. Study inclusion criteria were female sex; age 18-45; non-metastatic breast cancer diagnosis; underwent FP consultation; underwent neoadjuvant chemotherapy. Referrals for FP evaluation came from a regional referral base of oncology clinics. Various time-points related to cancer diagnosis, FP or chemotherapy were obtained from medical record review. We compared time-points between those who underwent ovarian stimulation for FP versus those who did not using T-tests and linear modeling. A total of 89 women who had FP consultation prior to neoadjuvant chemotherapy were identified. Sixty-seven percent underwent ovarian stimulation prior to cancer treatment and 33% did not. Women who underwent ovarian stimulation were similar in parity and clinical cancer stage to those who did not. Overall, the average time from cancer diagnosis to chemotherapy start was similar between the group that did undergo ovarian stimulation and those who did not (38.1 ± 11.3 versus 39.4 ± 18.5 days, P = 0.672). Those that underwent ovarian stimulation were referred 9.4 ± 6.8 days after diagnosis versus 17.9 ± 15.3 days for those

Research nuclear reactor start-up simulator

International Nuclear Information System (INIS)

Sofo Haro, M.; Cantero, P.

2009-01-01

This work presents the design and FPGA implementation of a research nuclear reactor start-up simulator. Its aim is to generate a set of signals that allow replacing the neutron detector for stimulated signals, to feed the measurement electronic of the start-up channels, to check its operation, together with the start-up security logic. The simulator presented can be configured on three independent channels and adjust the shape of the output pulses. Furthermore, each channel can be configured in 'rate' mode, where you can specify the growth rate of the pulse frequency in %/s. Result and details of the implementation on FPGA of the different functional blocks are given. (author)

Enhancing start performance in the sport of skeleton

OpenAIRE

Colyer, Steffi

2015-01-01

A fast start is considered to be crucial in skeleton with marginal gains in start performance perceived to make meaningful improvements to overall chances of success. Currently, knowledge surrounding the underlying determinants of start performance is sparse and training practices are based on limited scientific evidence. A series of investigations were conducted to advance this understanding.Initial observations revealed similarities between dry-land push-starts and those on ice tracks. Howe...

Application of the fractional neutron point kinetic equation: Start-up of a nuclear reactor

International Nuclear Information System (INIS)

Polo-Labarrios, M.-A.; Espinosa-Paredes, G.

2012-01-01

Highlights: ► Neutron density behavior at reactor start up with fractional neutron point kinetics. ► There is a relaxation time associated with a rapid variation in the neutron flux. ► Physical interpretation of the fractional order is related with non-Fickian effects. ► Effect of the anomalous diffusion coefficient and the relaxation time is analyzed. ► Neutron density is related with speed and duration of the control rods lifting. - Abstract: In this paper we present the behavior of the variation of neutron density when the nuclear reactor power is increased using the fractional neutron point kinetic (FNPK) equation with a single-group of delayed neutron precursor. It is considered that there is a relaxation time associated with a rapid variation in the neutron flux and its physical interpretation of the fractional order is related with non-Fickian effects from the neutron diffusion equation point of view. We analyzed the case of increase the nuclear reactor power when reactor is cold start-up which is a process of inserting reactivity by lifting control rods discontinuously. The results show that for short time scales of the start-up the neutronic density behavior with FNPK shows sub-diffusive effects whose absorption are government by control rods velocity. For large times scale, the results shows that the classical equation of the neutron point kinetics over predicted the neutron density regarding to FNPK.

Improving operating room first start efficiency - value of both checklist and a pre-operative facilitator.

Science.gov (United States)

Panni, M K; Shah, S J; Chavarro, C; Rawl, M; Wojnarwsky, P K; Panni, J K

2013-10-01

There are multiple components leading to improved operating room efficiency. We undertook a project focusing on first case starts; accounting for each delay component on a global basis. Our hypothesis was there would be a reduction in first start delays after we implemented strategies to address the issues identified through this accounting process. An orange sheet checklist was implemented, with specific items that needed to be clear prior to roll back to the operating room (OR), and an OR facilitator was employed to intervene whenever there were any missing items needed for a specific patient. We present the data from this quality improvement project over an 18-month period. Initially, 10.07 (± 0.73) delayed first starts occurred per day but declined steadily over time to a low of 4.95 (± 0.38) per day after 6 months (-49.2 %, P < 0.001). By the end of the project, the most common reasons for delay still included late surgical attending (19%), schedule changes (14%) as well as 'other reasons' (13%), but with an overall reduction per day of each. Total anaesthesia delay initially totalled 11% of the first start delays, but was negligible (< 1%) at the project's completion. While we have a challenging operating room environment based on our patient population, multiple trainees in both the surgery and anaesthesiology teams: an orange sheet - pre-operative checklist in addition to a dedicated pre-operative facilitator; allowed us to make a substantial improvement in our first start on time starts. © 2013 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

FEMA DFIRM Station Start

Data.gov (United States)

Minnesota Department of Natural Resources — This table contains information about station starting locations. These locations indicate the reference point that was used as the origin for distance measurements...

Head Start Impact Study

Data.gov (United States)

U.S. Department of Health & Human Services — Nationally representative, longitudinal information from an evaluation where children were randomly assigned to Head Start or community services as usual;direct...

Linking Environmental Orientation to Start-ups’ Networking Activities

DEFF Research Database (Denmark)

Dickel, Petra; Ritter, Thomas

Besides for-profit start-ups, an increasing number of firms start their existence with the purpose to “do good” for society – mirrored in an increasing academic discussion of sustainable firms. Yet, there is little research on the networking activities of start-ups that do not have profit...... generation as their primary focus. Addressing this research gap, we develop hypotheses on the different networking activities of environmentally oriented start-ups arguing that their societal focus has a positive impact on the frequency of their networking and the size of their network. For empirically...... investigating such networking differences, we use data from 179 technology-based start-ups and show that start-ups with a strong external environmental orientation have significantly higher networking frequency and build larger networks. On the contrary, strong internal environmental orientation is linked...

Dampak Mentoring Pada Keberhasilan Start-Up Business: Studi Kasus Pada Start-Up Business di Indonesia [Mentoring the Impact of Success of a Start-Up Business: A Case Study of a Start-Up Business in Indonesia

OpenAIRE

Christina Yanita Setyawati

2016-01-01

Entrepreneurship is a highly developed science today, as well as in the world of education in Indonesia. Teaching entrepreneurship at the university level, especially at some universities in Surabaya, the second largest city in Indonesia, shows the positive impact that there were 74.03% of start-up businesses that survived and thrived in 2014. Based on the previous observation, some business start-ups are accompanied by a mentor. Mentoring is a process of forming and maintaining lasting relat...

Successful hydraulic strategies to start up OLAND sequencing batch reactors at lab scale.

Science.gov (United States)

Schaubroeck, Thomas; Bagchi, Samik; De Clippeleir, Haydée; Carballa, Marta; Verstraete, Willy; Vlaeminck, Siegfried E

2012-05-01

Oxygen-limited autotrophic nitrification/denitrification (OLAND) is a one-stage combination of partial nitritation and anammox, which can have a challenging process start-up. In this study, start-up strategies were tested for sequencing batch reactors (SBR), varying hydraulic parameters, i.e. volumetric exchange ratio (VER) and feeding regime, and salinity. Two sequential tests with two parallel SBR were performed, and stable removal rates > 0.4 g N l(-1) day(-1) with minimal nitrite and nitrate accumulation were considered a successful start-up. SBR A and B were operated at 50% VER with 3 g NaCl l(-1) in the influent, and the influent was fed over 8% and 82% of the cycle time respectively. SBR B started up in 24 days, but SBR A achieved no start-up in 39 days. SBR C and D were fed over 65% of the cycle time at 25% VER, and salt was added only to the influent of SBR D (5 g NaCl l(-1)). Start-up of both SBR C and D was successful in 9 and 32 days respectively. Reactor D developed a higher proportion of small aggregates (0.10-0.25 mm), with a high nitritation to anammox rate ratio, likely the cause of the observed nitrite accumulation. The latter was overcome by temporarily including an anoxic period at the end of the reaction phase. All systems achieved granulation and similar biomass-specific nitrogen removal rates (141-220 mg N g(-1) VSS day(-1)). FISH revealed a close juxtapositioning of aerobic and anoxic ammonium-oxidizing bacteria (AerAOB and AnAOB), also in small aggregates. DGGE showed that AerAOB communities had a lower evenness than Planctomycetes communities. A higher richness of the latter seemed to be correlated with better reactor performance. Overall, the fast start-up of SBR B, C and D suggests that stable hydraulic conditions are beneficial for OLAND while increased salinity at the tested levels is not needed for good reactor performance. © 2012 The Authors. Microbial Biotechnology © 2012 Society for Applied Microbiology and Blackwell Publishing

Early Head Start Evaluation

Data.gov (United States)

U.S. Department of Health & Human Services — Longitudinal information from an evaluation where children were randomly assigned to Early Head Start or community services as usual;direct assessments and...

Ten steps to get started in Genome Assembly and Annotation

Science.gov (United States)

Dominguez Del Angel, Victoria; Hjerde, Erik; Sterck, Lieven; Capella-Gutierrez, Salvadors; Notredame, Cederic; Vinnere Pettersson, Olga; Amselem, Joelle; Bouri, Laurent; Bocs, Stephanie; Klopp, Christophe; Gibrat, Jean-Francois; Vlasova, Anna; Leskosek, Brane L.; Soler, Lucile; Binzer-Panchal, Mahesh; Lantz, Henrik

2018-01-01

As a part of the ELIXIR-EXCELERATE efforts in capacity building, we present here 10 steps to facilitate researchers getting started in genome assembly and genome annotation. The guidelines given are broadly applicable, intended to be stable over time, and cover all aspects from start to finish of a general assembly and annotation project. Intrinsic properties of genomes are discussed, as is the importance of using high quality DNA. Different sequencing technologies and generally applicable workflows for genome assembly are also detailed. We cover structural and functional annotation and encourage readers to also annotate transposable elements, something that is often omitted from annotation workflows. The importance of data management is stressed, and we give advice on where to submit data and how to make your results Findable, Accessible, Interoperable, and Reusable (FAIR). PMID:29568489

Head Start Impact Study. Technical Report

Science.gov (United States)

Puma, Michael; Bell, Stephen; Cook, Ronna; Heid, Camilla; Shapiro, Gary; Broene, Pam; Jenkins, Frank; Fletcher, Philip; Quinn, Liz; Friedman, Janet; Ciarico, Janet; Rohacek, Monica; Adams, Gina; Spier, Elizabeth

2010-01-01

This Technical Report is designed to provide technical detail to support the analysis and findings presented in the "Head Start Impact Study Final Report" (U.S. Department of Health and Human Services, January 2010). Chapter 1 provides an overview of the Head Start Impact Study and its findings. Chapter 2 provides technical information on the…

Starting electronics

CERN Document Server

Brindley, Keith

2005-01-01

Starting Electronics is unrivalled as a highly practical introduction for hobbyists, students and technicians. Keith Brindley introduces readers to the functions of the main component types, their uses, and the basic principles of building and designing electronic circuits. Breadboard layouts make this very much a ready-to-run book for the experimenter; and the use of multimeter, but not oscilloscopes, puts this practical exploration of electronics within reach of every home enthusiast's pocket. The third edition has kept the simplicity and clarity of the original. New material

From BookStart to BookSmart : about the importance of an early start with parent-child reading

NARCIS (Netherlands)

Berg, Heleen van den

2015-01-01

BookStart has been developed to enhance parent-child verbal interactions in early childhood by promoting book sharing. Parents receive a voucher for a baby book and free access to baby books in the library. In a large-scale research, we found that if parents complied with the BookStart suggestion to

Start-up analysis for marketing strategy.

Science.gov (United States)

Griffith, M J; Baloff, N

1984-01-01

The complex start-up effect on utilization of health care services is too often overlooked or underestimated by marketing planners, leading to a range of negative consequences for both the users of services and the provider organization. Start-up analysis allows accurate estimation of these utilization effects for coordinated strategic planning among marketing finance, and operations.

Experience in the Kola NPP start-up works

International Nuclear Information System (INIS)

Zakharov, S.I.; Omel'chuk, V.V.; Bodrukhin, Yu.M.

1984-01-01

Main stages and peculiar features of maintenance and start-up works at WWER-440 type reactor NPPs described. Remarks revealed during complex equipment testing, physical and power start-up will be useful for arrangement of maintenance and start-up works at newly built NPPs

Start II, red ink, and Boris Yeltsin

International Nuclear Information System (INIS)

Arbatov, A.

1993-01-01

Apart from the vulnerability implied by the START II treaty, it will bear the burden of the general political opposition to the Yeltsin administration. START II will be seen as part of an overall Yeltsin-Andrei Kozyrev foreign policy that is under fire for selling out Russian national interests in Yugoslavia, the Persian Gulf, and elsewhere. This article discusses public opinion concerning START II, the cost of its implementation, and the general purpose of the treaty

Simulation on the start-up of MED seawater desalination system coupled with nuclear heating reactor

International Nuclear Information System (INIS)

Ge Zhihua; Du Xiaoze; Yang Lijun; Yang Yongping; Wu Shaorong

2008-01-01

The mathematical control model for dynamic start-up process of the VTE-MED seawater desalination system was established employing the previous developed non-linear differential equations for system design and performance analysis. The influences on the start-up process of the operating parameters, such as the initial feed brine flow rate and the top brine temperature were analyzed. The relationships among the feed brine flow rate, the gained output ratio (GOR) and the start-up time were also investigated, which can be evidence to determine the optimal initial feed brine flow rate. The results also indicate that the system can consume the total heat rating generated by the low temperature nuclear heating reactor (LT-NHR) even at the most initial start-up stage, implying the present desalination system has excellent coupling characteristics with the LT-NHR. With necessary experiments verifications, the start-up control model developed in this paper can be the theoretical base for the analysis of dynamic performances of the seawater desalination system

Depressed mood, usual activity level, and continued employment after starting dialysis.

Science.gov (United States)

Kutner, Nancy G; Zhang, Rebecca; Huang, Yijian; Johansen, Kirsten L

2010-11-01

When patients start dialysis, their employment rate declines and disability benefits are an option. With patient sociodemographic and clinical characteristics including disability income status controlled, we investigated the significance of depressed mood and usual activity level as predictors of patients' continued employment after dialysis start. Incident patients from 296 randomly selected dialysis clinics were surveyed in the Comprehensive Dialysis Study (CDS). Participants provided information about employment status, disability income status, education, depressive symptoms measured by the Patient Health Questionnaire-2 (PHQ-2), and usual activity level/energy expenditure measured by the Human Activity Profile. Age, gender, race, insurance, diabetes, inability to ambulate or transfer, chronic obstructive pulmonary disease, cardiovascular conditions, and hemoglobin and serum albumin values at treatment start were obtained from US Renal Data System files. Dialysis modality was defined at time of interview. Among 585 CDS participants who worked in the previous year, 191 (32.6%) continued working after dialysis start. On the basis of the PHQ-2 cutoff score ≥3, 12.1% of patients who remained employed had possible or probable depression, compared with 32.8% of patients who were no longer employed. In adjusted analyses, higher Human Activity Profile scores were associated with increased likelihood of continued employment, and there was a borderline association between lower PHQ-2 scores and continued employment. Screening and management of depressive symptoms and support for increased activity level may facilitate patients' opportunity for continued employment after dialysis start, along with generally improving their overall quality of life.

School Starting Age and the Crime-Age Profile

OpenAIRE

Landerso, Rasmus; Nielsen, Helena Skyt; Simonsen, Marianne

2015-01-01

This paper uses register-based data to investigate the effects of school starting age on crime. Through this, we provide insights into the determinants of crime-age profiles. We exploit that Danish children typically start first grade in the calendar year they turn seven, which gives rise to a discontinuity in school starting age for children born around New Year. Our analysis speaks against a simple invariant crime-age profile as is popular in criminology: we find that higher school starting...

Head Start Instructional Professionals' Inclusion Perceptions and Practices

Science.gov (United States)

Muccio, Leah S.; Kidd, Julie K.; White, C. Stephen; Burns, M. Susan

2014-01-01

This study considered the facilitators and barriers of successful inclusion in Head Start classrooms by examining the perspectives and practices of instructional professionals. A cross-sectional survey design was combined with direct observation in inclusive Head Start classrooms. Survey data were collected from 71 Head Start instructional…

Optimization of Passive Voltage Multipliers for Fast Start-up and Multi-voltage Power Supplies in Electromagnetic Energy Harvesting Systems

Science.gov (United States)

Yang, G.; Stark, B. H.; Burrow, S. G.; Hollis, S. J.

2014-11-01

This paper demonstrates the use of passive voltage multipliers for rapid start-up of sub-milliwatt electromagnetic energy harvesting systems. The work describes circuit optimization to make as short as possible the transition from completely depleted energy storage to the first powering-up of an actively controlled switched-mode converter. The dependency of the start-up time on component parameters and topologies is derived by simulation and experimentation. The resulting optimized multiplier design reduces the start-up time from several minutes to 1 second. An additional improvement uses the inherent cascade structure of the voltage multiplier to power sub-systems at different voltages. This multi-rail start-up is shown to reduce the circuit losses of the active converter by 72% with respect to the optimized single-rail system. The experimental results provide insight into the multiplier's transient behaviour, including circuit interactions, in a complete harvesting system, and offer important information to optimize voltage multipliers for rapid start-up.

Optimization of Passive Voltage Multipliers for Fast Start-up and Multi-voltage Power Supplies in Electromagnetic Energy Harvesting Systems

International Nuclear Information System (INIS)

Yang, G; Stark, B H; Burrow, S G; Hollis, S J

2014-01-01

This paper demonstrates the use of passive voltage multipliers for rapid start-up of sub-milliwatt electromagnetic energy harvesting systems. The work describes circuit optimization to make as short as possible the transition from completely depleted energy storage to the first powering-up of an actively controlled switched-mode converter. The dependency of the start-up time on component parameters and topologies is derived by simulation and experimentation. The resulting optimized multiplier design reduces the start-up time from several minutes to 1 second. An additional improvement uses the inherent cascade structure of the voltage multiplier to power sub-systems at different voltages. This multi-rail start-up is shown to reduce the circuit losses of the active converter by 72% with respect to the optimized single-rail system. The experimental results provide insight into the multiplier's transient behaviour, including circuit interactions, in a complete harvesting system, and offer important information to optimize voltage multipliers for rapid start-up

Predicting start-up success with machine learning

OpenAIRE

Bento, Francisco Ramadas da Silva Ribeiro

2018-01-01

Start-ups are becoming the motor that moves our economy. Google, Apple, or more recently Airbnb and Uber are companies with tremendous impact in worldwide economy, social interactions and government. Over the past decade, both in the US and Europe, there has been an exponential growth in start-up formation. Thus, it seems a relevant challenge understanding what makes this type of high-risk ventures successful and as such, attractive to investors and entrepreneurs. Success for a start-up is de...

Characteristics Contributing to High-Technology Start-Up Success

DEFF Research Database (Denmark)

Goslin, L.; Brown, W.; Palm, T.

1993-01-01

that the professional venture-capital-funded start-up firm will generally reflect the practices of perceptive management regarding: style, team approach, structure of the firm, market definition, culture, vision, and a formal strategy. Nevertheless, there are some questions about differences those characteristics...... by interview to provide insights on: the entrepreneurial-marketing style utilized, cultural characteristics of the firm, and perspectives of the time horizon of strategy. The representative firms (seven firms to a set) from whom information was solicited were drawn from the U.S. Pacific Northwest), Denmark...

Getting started with SBT for Scala

CERN Document Server

Saxena, Shiti

2013-01-01

A practical and fast-paced guide, Getting Started with SBT for Scala walks you through the setup of Scala projects in SBT with sample code for common as well as critical scenarios.Getting Started with SBT for Scala is for developers working on Scala projects who are interested in learning and utilizing Simple Build Tool to manage the build process.

Getting started in 3D with Maya

CERN Document Server

Watkins, Adam

2012-01-01

Deliver professional-level 3D content in no time with this comprehensive guide to 3D animation with Maya. With over 12 years of training experience, plus several award winning students under his belt, author Adam Watkins is the ideal mentor to get you up to speed with 3D in Maya. Using a structured and pragmatic approach Getting Started in 3D with Maya begins with basic theory of fundamental techniques, then builds on this knowledge using practical examples and projects to put your new skills to the test. Prepared so that you can learn in an organic fashion, each chapter builds on the know

Head Start at ages 3 and 4 versus Head Start followed by state pre-k: Which is more effective?

Science.gov (United States)

Jenkins, Jade Marcus; Farkas, George; Duncan, Greg J.; Burchinal, Margaret; Vandell, Deborah Lowe

2016-01-01

As policy-makers contemplate expanding preschool opportunities for low-income children, one possibility is to fund two, rather than one year of Head Start for children at ages 3 and 4. Another option is to offer one year of Head Start followed by one year of pre-k. We ask which of these options is more effective. We use data from the Oklahoma pre-k study to examine these two ‘pathways’ into kindergarten using regression discontinuity to estimate the effects of each age-4 program, and propensity score weighting to address selection. We find that children attending Head Start at age 3 develop stronger pre-reading skills in a high quality pre-kindergarten at age 4 compared with attending Head Start at age 4. Pre-k and Head Start were not differentially linked to improvements in children’s pre-writing skills or pre-math skills. This suggests that some impacts of early learning programs may be related to the sequencing of learning experiences to more academic programming. PMID:27076692

Photoemission starting of induction rf-driven multicusp ion sources

International Nuclear Information System (INIS)

Pickard, D.S.; Leung, K.N.; Perkins, L.T.; Ponce, D.M.; Young, A.T.

1996-01-01

It has been demonstrated that pulsed and continuous wave, rf-driven hydrogen discharges can be started with photoemission. The extracted H - current from a photoemission-started plasma has been investigated and does not differ significantly from that of a filament-started plasma. The minimum pressure for photoemissive starting was found to be higher than that of filament starting, 17 mTorr compared to 7 mTorr, respectively, in this particular configuration. copyright 1996 American Institute of Physics

Cold start dynamics and temperature sliding observer design of an automotive SOFC APU

Science.gov (United States)

Lin, Po-Hsu; Hong, Che-Wun

This paper presents a dynamic model for studying the cold start dynamics and observer design of an auxiliary power unit (APU) for automotive applications. The APU is embedded with a solid oxide fuel cell (SOFC) stack which is a quiet and pollutant-free electric generator; however, it suffers from slow start problem from ambient conditions. The SOFC APU system equips with an after-burner to accelerate the start-up transient in this research. The combustion chamber burns the residual fuel (and air) left from the SOFC to raise the exhaust temperature to preheat the SOFC stack through an energy recovery unit. Since thermal effect is the dominant factor that influences the SOFC transient and steady performance, a nonlinear real-time sliding observer for stack temperature was implemented into the system dynamics to monitor the temperature variation for future controller design. The simulation results show that a 100 W APU system in this research takes about 2 min (in theory) for start-up without considering the thermal limitation of the cell fracture.

Effect of zero-valent iron and trivalent iron on UASB rapid start-up.

Science.gov (United States)

Wang, Jie; Fang, Hongyan; Jia, Hui; Yang, Guang; Gao, Fei; Liu, Wenbin

2018-01-01

In order to realize the rapid start-up of upflow anaerobic sludge blanket (UASB) reactor, the iron ion in different valence state was added to UASB. The results indicated that the start-up time of R3 (FeCl 3 ) was 48 h faster than that of R2 (zero-valent iron (ZVI)). It was because the FeCl 3 could rapidly promote granulation of sludge as a flocculant. However, ZVI released Fe 2+ through corrosion slowly, and then the Fe 2+ increased start-up speed by enhancing enzyme activity and enriching methanogens. In addition, the ZVI and FeCl 3 could promote hydrolysis acidification and strengthen the decomposition of long-chain fatty acids. The detection of iron ions showed that iron ions mainly existed in the sludge. Because the high concentration of Fe 2+ could inhibit anaerobic bacteria activity, excess Fe 3+ could be changed into iron hydroxide precipitation to hinder the mass transfer process of anaerobic bacteria under the alkaline condition. The FeCl 3 was suitable to be added at the initial stage of UASB start-up, and the ZVI was more fitted to be used in the middle stage of reactor start-up to improve the redox ability.

Database Description - GRIPDB | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available erative Program of the Japan Science and Technology Agency (JST). Reference(s) Article title: GRIPDB - G pro...ntenance site National Institute of Industrial Science and Technology (AIST), Tok

Effect of PWR Re-start ramp rate on pellet-cladding interactions

International Nuclear Information System (INIS)

Yagnik, S.K.; Chang, B.C.; Sunderland, D.J.

2005-01-01

To mitigate pellet-cladding interaction (PCI) leading to fuel rod failures, fuel suppliers specify reactor power ramp rate limitations during reactor start-up after an outage. Typical re-start ramp rates are restricted and range between 3-4% per hour of full reactor power above a threshold power level. Relaxation of threshold power and ramp rate restrictions has the potential to improve plant economics. The paper will compare known re-start power ascension procedures employed in the US, German, French and Korean PWRs after a refuelling outage. A technical basis for optimising power ascension procedures during reactor start-up can be developed using analytical modelling. The main objective of the modelling is to determine the potential for PCI failure for various combinations of threshold power levels and ramp rate levels. A key element of our analysis is to estimate the decrease in margin to cladding failure by ISCC based on a time-temperature-stress failure criterion fashioned Act a cumulative cladding damage index. The analysis approach and the cladding damage model will be described and the results from three case studies based on the FALCON fuel rod behaviour code will be reported. We conclude that the PCI behaviour is more affected by ramp rate and threshold power than by the fuel design and that the fuel power history is the most important parameter. (authors)

Do Head Start Impacts Vary by Neighborhood Context?

Science.gov (United States)

Morris, Pamela A.; Connors, Maia C.; McCoy, Dana Charles; Gomez, Celia J.; Yoshikawa, Hiro; Aber, J. Lawrence

2014-01-01

This paper capitalizes on the addition of geocodes for Head Start centers in which children were randomly assigned to address questions about the role of neighborhood characteristics in moderating impacts of assignment to the Head Start program. Researchers explore the extent to which impacts of assignment to Head Start on outcomes for children…

Factors influencing person’s decision to start-up business

OpenAIRE

Žukauskas, Pranas; Stripeikis, Osvaldas

2011-01-01

Many scientists try to analyze factors influencing the business start-up process. It is obvious that in nowadays economy the level of entrepreneurship allows a country to obtain competitive advantages. The European Commission in a Green paper on "Entrepreneurship in Europe" focuses on a question about businesses growing among Europeans. At a time when governments are facing the challenge of how to revive their economies, fostering entrepreneurship could be one of the main stimuli to raise the...

Effects of nutritional supplementation for HIV patients starting antiretroviral treatment

DEFF Research Database (Denmark)

Olsen, Mette Frahm; Abdissa, Alemseged; Kæstel, Pernille

2014-01-01

Objectives: To determine the effects of lipid based nutritional supplements with either whey or soy protein in patients with HIV during the first three months of antiretroviral treatment (ART) and to explore effects of timing by comparing supplementation at the start of ART and after three months....../µL (−2 to 53 cells/µL) were CD4. Effects of the soy containing supplement on immune recovery were not significant. The effects of the two supplements, however, were not significantly different in direct comparison. Exploratory analysis showed that relatively more lean body mass was gained by patients...... with undetectable viral load at three months. Patients receiving delayed supplementation had higher weight gain but lower gains in functional outcomes. Conclusions: Lipid based nutritional supplements improved gain of weight, lean body mass, and grip strength in patients with HIV starting ART. Supplements...

Internationalisation of high-tech start-ups and fast growth-evidence for UK and Germany

OpenAIRE

Bürgel, Oliver; Fier, Andreas; Licht, Georg; Murray, Gordon

2000-01-01

For firms acting in technological niches the expansion into foreign markets can be a way to increase sales and to thus to recover initial sunk costs over a shorter time frame. Our research, based on survey data for nearly 600 British and German high-tech start-ups, examines whether internationalisation leads to faster growth among high-tech start-ups. Results show that firms with international sales have higher sales growth than firms that sell only domestically. We find that technological so...

Start-up Costs, Taxes and Innovative Entrepreneurship

NARCIS (Netherlands)

P. Darnihamedani (Pourya); J.H. Block (Jörn); S.J.A. Hessels (Jolanda); A. Simonyan (Aram)

2015-01-01

markdownabstract__Abstract__ Prior research suggests that start-up costs and taxes negatively influence entry into entrepreneurship. Yet, no distinction is made regarding the type of entrepreneurship, particularly innovative versus non-innovative entrepreneurship. Start-up costs, being one-off

Study on ECH-assisted start-up using trapped particle configuration in KSTAR and application to ITER

Science.gov (United States)

Lee, Jeongwon; Kim, Jayhyun; An, YoungHwa; Yoo, Min-Gu; Hwang, Y. S.; Na, Yong-Su

2017-12-01

ECH-assisted start-up using trapped particle configuration (TPC) is firstly studied in a superconducting, conventional tokamak, KSTAR. First, improved and efficient start-up using TPC than conventional field null configuration (FNC) is achieved by enhanced pre-ionization plasma quality. TPC shows the broader operation window in terms of the poloidal field quality and the deuterium prefill pressure than that of FNC. Surprisingly the particle trapping enhances the plasma start-up performance even with much lower particle trapping ratio than that of spherical torus. Reliability of TPC with low trapping ratio is investigated by 0D plasma evolution code, TECHP0D. Second, the characteristics of TPC start-up are explored with experiments and modellings. Two kind of start-up failure conditions are identified by the magnetic pitch and prefill pressure scan experiments: (i) low ionization rate; and (ii) low density condition. These experimental observation has consistency with TECHP0D modeling result. Finally, reliable ITER-relevant low toroidal electric field start-up using TPC is achieved with drastically improved success rate of start-up in KSTAR. In this experiments, validity of the ITER-like toroidally inclined ECH/ECCD injection is also expected. Time dependent ITER start-up scenario using TPC is proposed and the superiority of it than FNC is discussed.

The Impact of Head Start on Children, Families and Communities. Final Report of the Head Start Evaluation, Synthesis and Utilization Project.

Science.gov (United States)

McKey, Ruth Hubbell; And Others

Including all Head Start research (both published and unpublished) and using, when possible, the statistical technique of meta-analysis, this final report of the Head Start Evaluation, Synthesis, and Utilization Project presents findings on the impact of Head Start on children's cognitive and socioemotional development, on child health and health…

Start-up strategies for thermophilic anaerobic digestion of pig manure

International Nuclear Information System (INIS)

Moset, V.; Bertolini, E.; Cerisuelo, A.; Cambra, M.; Olmos, A.; Cambra-López, M.

2014-01-01

Sludge physicochemical composition, methane (CH 4 ) yield, and methanogenic community structure and dynamics using quantitative real-time polymerase chain reaction were determined after start-up of anaerobic digestion of pig manure. Eight thermophilic continuous stirred anaerobic digesters were used during 126 days. Four management strategies were investigated: a feedless and a non-feedless period followed by a gradual or an abrupt addition of pig manure (two digesters per strategy). During the first 43 days, VFA (volatile fatty acids) accumulations and low CH 4 yield were observed in all digesters. After this period, digesters recovered their initial status being propionic acid the last parameter to be re-established. Non-feedless digesters with an abrupt addition of pig manure showed the best performances (lower VFA accumulation and higher CH 4 yield). Differences in microbial orders and dynamics, however, were less evident among treatments. Hydrogenotrophic methanogenesis, Methanomicrobiales first and Methanobacteriales second, was the dominant metabolic pathway in all digesters. Further research is needed to clarify the role and activity of hydrogenotrophic methanogens during the recovery start-up period and to identify the best molecular tools and methodologies to monitor microbial populations and dynamics reliably and accurately in anaerobic digesters. - Highlights: • Four start-up strategies for thermophilic anaerobic digestion of pig manure were tested. • Physicochemical composition, methane yield and methanogenic community were determined. • During the first 43 days, a decline in reactor's performance occurred. • The best start-up strategy was non-feedless with an abrupt addition of pig slurry. • Hydrogenotrophic methanogenesis was the dominant metabolic pathway

Tokamak start-up with electron-cyclotron heating

International Nuclear Information System (INIS)

Holly, D.J.; Prager, S.C.; Shepard, D.A.; Sprott, J.C.

1981-01-01

Experiments are described in which the start-up voltage in a tokamak is reduced by about a factor of two by the use of a modest amount of electron cyclotron resonance heating power for pre-ionization. The solution of the zero-dimensional start-up equations indicates that the effect is due to the high initial density which increases the rate at which the conductivity increases in the neutral-dominated initial plasma. The effect extrapolates favourably to larger tokamaks. A 50% reduction in the start-up volt-second requirement and impurity reflux is also observed. (author)

Tokamak start-up with electron-cyclotron heating

Energy Technology Data Exchange (ETDEWEB)

Holly, D J; Prager, S C; Shepard, D A; Sprott, J C [Wisconsin Univ., Madison (USA)

1981-11-01

Experiments are described in which the start-up voltage in a tokamak is reduced by about a factor of two by the use of a modest amount of electron cyclotron resonance heating power for pre-ionization. The solution of the zero-dimensional start-up equations indicates that the effect is due to the high initial density which increases the rate at which the conductivity increases in the neutral-dominated initial plasma. The effect extrapolates favourably to larger tokamaks. A 50% reduction in the start-up volt-second requirement and impurity reflux is also observed.

Individual birds advance offspring hatching in response to increased temperature after the start of laying

NARCIS (Netherlands)

Vedder, Oscar

In seasonally reproducing organisms, timing reproduction to match food availability is key to individual fitness. Ambient temperature functions as an important cue for the timing of the food peak in temperate-zone birds. After laying start, individual birds may still improve synchrony between

A Studio Based Approach to Enhancing Decision Making in Sme Start-Up

NARCIS (Netherlands)

Sol, H G; Ejiri, A.H.; Nabukenya, J.

2011-01-01

The start-up phase plays an important role in the success and survival of many enterprises, which greatly depends on adequate and timely services for decision making. However, deciding to startup a mining Small and Medium Enterprise (SME) is a challenging task for many entrepreneurs in Uganda.

School Starting Age and the Crime-Age Profile

DEFF Research Database (Denmark)

Landersø, Rasmus; Nielsen, Helena Skyt; Simonsen, Marianne

2017-01-01

This paper uses register-based data to investigate the effects of school starting age on crime. Through this, we provide insights into the determinants of crime-age profiles. We exploit that Danish children typically start first grade in the calendar year they turn seven, which gives rise...... to a discontinuity in school starting age for children born around New Year. Our analysis speaks against a simple invariant crime-age profile as is popular in criminology: we find that higher school starting age lowers the propensity to commit crime at young ages. We also find effects on the number of crimes...

Multigenerational Head Start Participation: An Unexpected Marker of Progress

Science.gov (United States)

Chor, Elise

2018-01-01

One-quarter of the Head Start population has a mother who participated in the program as a child. This study uses experimental Head Start Impact Study (HSIS) data on 3- and 4-year-olds (N = 2,849) to describe multigenerational Head Start families and their program experiences. In sharp contrast to full-sample HSIS findings, Head Start has large,…

Customized broadband Sloan-filters for the JST/T250 and JAST/T80 telescopes: measurement summary

Science.gov (United States)

Brauneck, Ulf; Sprengard, Ruediger; Bourquin, Sebastien; Marín-Franch, Antonio

2018-01-01

The Centro de Estudios de Fisica del Cosmos de Aragon will conduct a photometric sky survey with two new telescopes recently set up on the Javalambre mountain in Spain: the JST/T250 is a 2.55-m telescope with a plate scale of 22.67 arc⁢sec/mm and a 3-deg-diameter field of view (FoV) and the auxiliary telescope JAST/T80 with a 82-cm primary mirror and an FoV of 2 deg diameter. A multiple CCD (9k-by-9k array size, 10-μm pixel size) mosaic camera is used in combination with filter trays or filter wheels, each containing a multitude of filters in dimensions of 101.7×96.5 mm or 106.8×106.8 mm. For this project, Schott manufactured 56 specially designed narrow band steep-edged bandpass interference filters and five broadband Sloan-filters which were completed only recently. We report here on the results of the broadband Sloan-filters with transmission bands of 324 to 400 nm (Sloan-u), 400 to 550 nm (Sloan-g), 550 to 700 nm (Sloan-r), 695 to 850 nm (Sloan-i), and 830 to 1200 nm (Sloan-z). The filters are composed of Schott filterglasses and clearglass substrates coated with interference filters and represent an improvement of broadband Sloan filters commonly used in astronomy. In spite of the absorptive elements, the filters show maximum possible transmissions achieved by magnetron sputtered filter coatings. In addition, the blocking of the filters is better than OD5 (transmission <10 to -5) in the range 250 to 1050 nm which was achieved by combining up to three substrates. A high image quality required a low transmitted wavefront error (<λ/8 locally, respectively <λ/2 globally). We report on the spectral and interferometric results measured on the filters.

to start

Indian Academy of Sciences (India)

Click here to start. Table of contents. Slide 1 · Slide 2 · Slide 3 · Slide 4 · Slide 5 · Slide 6 · Slide 7 · Slide 8 · Slide 9 · Slide 10 · Slide 11 · Slide 12 · Slide 13 · Slide 14 · Slide 15 · Slide 16 · Slide 17 · Slide 18 · Slide 19 · Slide 20 · Slide 21 · Slide 22 · Slide 23 · Slide 24 · Slide 25 · Slide 26 · Slide 27 · Slide 28 · Slide 29 · Slide 30.

Density and starting-energy dependent effective interaction

International Nuclear Information System (INIS)

Yamaguchi, Norio; Nagata, Sinobu; Kasuga, Teruo

1979-01-01

A new effective potential constructed from the reaction matrix calculation of nuclear matters is proposed, taking three-body effects into account. Starting from the two-body scattering equation for nuclear matters, an equation with averaged momentum is introduced as the definition of effective interaction. The parameters in the equation are the Fermi momentum and the starting energy. The nuclear density dependence and the starting energy dependence are independently treated in the potential. The effective interactions including three-body effects were calculated. The dependence on the starting energy is large. The effective interaction is more attractive in the triplet E state, and assures overall saturation without any artificial renormalization. The reaction matrix calculation can be well reproduced by the calculation with this effective potential. The results of calculation for the binding energy of He-4 and O-16 and the shell model matrix elements of O-16 are represented. (Kato, T.)

Genetic and bibliographic information - GenLibi | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available n Data acquisition method Articles related to genes were obtained from the bibliography database (JDream II)...provided from the JST bibliographic information system (JDream II) About This Database Database Description

A Fast-Starting Robotic Fish

Science.gov (United States)

Modarres-Sadeghi, Yahya; Watts, Matthew; Conte, Joe; Hover, Franz; Triantafyllou, Michael

2009-11-01

We have built a simple mechanical system to emulate the fast-start performance of fish. The system consisted of a thin metal beam covered by a urethane rubber fish body. The body form of the mechanical fish in this work was modeled from a pike species, which is the most successfully studied fast-start specialist species. The mechanical fish was held in curvature and hung in water by two restraining lines, which were simultaneously released by pneumatic cutting mechanisms. The potential energy in the beam was transferred into the fluid, thereby accelerating the fish, similar to a pike. We measured the resulting velocity and acceleration, as well as the efficiency of propulsion for the mechanical fish model and also ran a series of flow visualization tests to observe the resulting flow pattern. We also studied the influence of stiffness and geometry of the tail on the efficiency of propulsion and flow pattern. The hydrodynamic efficiency of the fish, calculated by the transfer of energy, was around 10%. Flow visualization of the mechanical fast-start wake was also analyzed, showing that the acceleration is associated with the fast movement of an intense vortex in a near-lateral direction.

Smart or Diverse Start-up Teams?

DEFF Research Database (Denmark)

Hoogendoorn, Sander; Parker, Simon C.; Van Praag, Mirjam

2017-01-01

This paper explores the relationship between cognitive abilities and team performance in a start-up setting. We argue that performance in this setting hinges on three tasks: opportunity recognition, problem solving, and implementation. We theorize that cognitive ability at the individual level has...... others can be assigned to tasks that impose a greater cognitive load (problem solving or opportunity recognition). We present the results of a field experiment in which 573 students in 49 teams started up and managed real companies. We ensured exogenous variation in—otherwise random—team composition...... by assigning students to teams based on their measured cognitive abilities. Each team performed a variety of tasks, often involving complex decision making. The key result of the experiment is that the performance of start-up teams first increases and then decreases with ability dispersion. Strikingly, average...

Analysis on the influence of the pump start transient performance with different inertia impeller

International Nuclear Information System (INIS)

Tang, Y; Cheng, J; Liu, E H; Tang, L D

2012-01-01

Centrifugal pump start-up time is very short, in the boot process, the instantaneous head and flow will have an impact role to the pipeline, and however the moment of inertia is one of the main factors affecting centrifugal pump boot acceleration. We analyzed the pump start-up transient characteristics with the different moment of inertia of the impeller corresponding to the different materials, there are three different moment of inertia of the impeller have been selected. At first, we use the 'Flowmaster' fluid system simulation software do the outer characteristics simulation to the selected-model, get the time - flow and the time - speed curve. Then, do the experiments research in the process when pump start-up, and compare with the simulation result. At last use the outer characteristics simulation result as the boundary, using the ANASYS CFX software do the transient simulation to the three groups with different inertia pump impeller, and draw the pressure distribution picture. In according to the analysis, we can confirm that the impact of inertia is one of the factors in the stability during the pump star, and we can get that the greater moment of inertia, the longer the boot stable. We also can get that combined Flowmaster with ANSYS can solved engineering practice problem in fluid system conveniently, and take it easy to solve the similar problem.

Agile methodology selection criteria: IT start-up case study

Science.gov (United States)

Micic, Lj

2017-05-01

Project management in modern IT companies is often based on agile methodologies which have several advantages compared to traditional methodologies such is waterfall. Having in mind that clients sometimes change project during development it is crucial for an IT company to choose carefully which methodology is going to implement and is it going to be mostly based on one or is it going got be combination of several. There are several modern and often used methodologies but among those Scrum, Kanban and XP programming are usually the most common. Sometimes companies use mostly tools and procedures from one but quite often they use some of the combination of those methodologies. Having in mind that those methodologies are just a framework they allow companies to adapt it for their specific projects as well as for other limitations. These methodologies are in limited usage Bosnia but more and more IT companies are starting to use agile methodologies because it is practice and common not just for their clients abroad but also starting to be the only option in order to deliver quality product on time. However it is always challenging which methodology or combination of several companies should implement and how to connect it to its own project, organizational framework and HR management. This paper presents one case study based on local IT start up and delivers solution based on theoretical framework and practical limitations that case company has.

Gas Turbine Engine Starting Applicated on TV2-117 Turboshaft

Directory of Open Access Journals (Sweden)

R. M. Catana

2017-10-01

Full Text Available The paper presents the examination of two different types of engine starting configurations, applicated on TV2-117A turboshaft, running into the test bench. The first type of starting configuration is a normal starting, with the engine connected to the dynamometer which controls the free turbine speed by the dynamometer load. The second type of starting is a different one, the engine is not connected with the dynamometer, therefore it results that there is no control of the free turbine speed from the dynamometer, only from the engine but in particular conditions. To achieve the starting phase an instrumentation scheme is created, to control and monitor the engine, and a starting sequence with all the parameters, confirmations and commands that are involved into the starting phase. The engine starting is performed by the test bench operating system, composed of an acquisition system and a programmable controller, wherewith is running the starting sequence.

Interval Between Hysterectomy and Start of Radiation Treatment Is Predictive of Recurrence in Patients With Endometrial Carcinoma

Energy Technology Data Exchange (ETDEWEB)

Cattaneo, Richard [Department of Radiation Oncology, Henry Ford Hospital, Detroit, Michigan (United States); Hanna, Rabbie K. [Division of Gynecologic Oncology, Department of Women' s Health Services, Henry Ford Hospital, Detroit, Michigan (United States); Jacobsen, Gordon [Public Health Science, Henry Ford Hospital, Detroit, Michigan (United States); Elshaikh, Mohamed A., E-mail: melshai1@hfhs.org [Department of Radiation Oncology, Henry Ford Hospital, Detroit, Michigan (United States)

2014-03-15

Purpose: Adjuvant radiation therapy (RT) has been shown to improve local control in patients with endometrial carcinoma. We analyzed the impact of the time interval between hysterectomy and RT initiation in patients with endometrial carcinoma. Methods and Materials: In this institutional review board-approved study, we identified 308 patients with endometrial carcinoma who received adjuvant RT after hysterectomy. All patients had undergone hysterectomy, oophorectomy, and pelvic and para-aortic lymph node evaluation from 1988 to 2010. Patients' demographics, pathologic features, and treatments were compared. The time interval between hysterectomy and the start of RT was calculated. The effects of time interval on recurrence-free (RFS), disease-specific (DSS), and overall survival (OS) were calculated. Following univariate analysis, multivariate modeling was performed. Results: The median age and follow-up for the study cohort was 65 years and 72 months, respectively. Eighty-five percent of the patients had endometrioid carcinoma. RT was delivered with high-dose-rate brachytherapy alone (29%), pelvic RT alone (20%), or both (51%). Median time interval to start RT was 42 days (range, 21-130 days). A total of 269 patients (74%) started their RT <9 weeks after undergoing hysterectomy (group 1) and 26% started ≥9 weeks after surgery (group 2). There were a total of 43 recurrences. Tumor recurrence was significantly associated with treatment delay of ≥9 weeks, with 5-year RFS of 90% for group 1 compared to only 39% for group 2 (P<.001). On multivariate analysis, RT delay of ≥9 weeks (P<.001), presence of lymphovascular space involvement (P=.001), and higher International Federation of Gynecology and Obstetrics grade (P=.012) were independent predictors of recurrence. In addition, RT delay of ≥9 weeks was an independent significant predictor for worse DSS and OS (P=.001 and P=.01, respectively). Conclusions: Delay in administering adjuvant RT after

Factors Associated with Unplanned Dialysis Starts in Patients followed by Nephrologists: A Retropective Cohort Study.

Directory of Open Access Journals (Sweden)

Pierre Antoine Brown

Full Text Available The number of patients starting dialysis is increasing world wide. Unplanned dialysis starts (patients urgently starting dialysis in hospital is associated with increased costs and high morbidity and mortality. Risk factors for starting dialysis urgently in hospital have not been well studied. The primary objective of this study was to identify risk factors for unplanned dialysis starts in patients followed in a multidisciplinary chronic kidney disease (CKD clinic. We performed a retrospective cohort study of 649 advanced CKD patients followed in a multidisciplinary CKD clinic at a tertiary care hospital from January 01, 2010 to April 30, 2013. Patients were classified as unplanned start (in hospital or elective start. Multivariable logistic regression was used to identify variables associated with unplanned dialysis initiation. 184 patients (28.4% initiated dialysis, of which 76 patients (41.3% initiated dialysis in an unplanned fashion and 108 (58.7% starting electively. Unplanned start patients were more likely to have diabetes (68.4% versus 51.9%; p = 0.04, CAD (42.1% versus 24.1%; p = 0.02, congestive heart failure (36.8% versus 17.6%; p = 0.01, and were less likely to receive modality education (64.5% vs 89.8%; p < 0.01 or be assessed by a surgeon for access creation (40.8% vesrus 78.7% p < 0.01. On multivariable analysis, higher body mass index (OR 1.07, 95% CI 1.02, 1.13, and a history of congestive heart failure (OR 2.41, 95% CI 1.09, 5.41 were independently associated with an unplanned start. Unplanned dialysis initiation is common among advanced CKD patients, even if they are followed in a multidisciplinary chronic kidney disease clinic. Timely education and access creation in patients at risk may lead to lower costs and less morbidity and mortality.

'Stutter timing' for charge decay time measurement

International Nuclear Information System (INIS)

Chubb, John; Harbour, John; Pavey, Ian

2011-01-01

The paper describes the approach of 'stutter timing' that has been developed to improve the accuracy of measuring charge decay times in the presence of noise in compact and portable charge decay test instrumentation. The approach involves starting and stopping the timing clock as the noisy signal rises above and falls below the target threshold voltage level.

What is the Safest Sprint Starting Position for American Football Players?

Directory of Open Access Journals (Sweden)

Bruno Bonnechere, Benoit Beyer, Marcel Rooze, Jan Serge Van Sint

2014-06-01

Full Text Available The main objective of this study was to perform a biomechanical analysis of three different sprint start patterns to determine the safest position in term of neck injury and Sport-Related Concussion (SRC. The second objective was to collect data on the learning process effect between football players and non-players. Three different sprint initial positions adopted by football players were studied (i.e., 4-, 3- and 2-point positions. Twenty five young healthy males, including 12 football players, participated to this study. A stereophotogrammetric system (i.e., Vicon was used to record motion patterns and body segments positions. Various measurements related to head and trunk orientation, and player field-of-view were obtained (e.g., head height, trunk bending, time to reach upright position, head speed (vertical direction and body speed (horizontal direction. Learning process was found to have no influence on studied parameters. Head redress is also delayed when adopting a 4-point position leading to a reduce field-of-view during the start and increasing therefore the probability of collision. Concerning the three different positions, the 4-point position seems to be the more dangerous because leading to higher kinetic energy than the 2- and 3-point start positions. This study proposes a first biomechanical approach to understand risk/benefit balance for athletes for those three different start positions. Results suggested that the 4-point position is the most risky for football players.

Tips for Starting Physical Activity

Science.gov (United States)

... Legislative Information Advisory & Coordinating Committees Strategic Plans & Reports Research Areas FAQs ... Starting Physical Activity Related Topics Section Navigation Tips to Help You Get Active ...

46 CFR 112.50-5 - Electric starting.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Electric starting. 112.50-5 Section 112.50-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING EMERGENCY LIGHTING AND POWER SYSTEMS Emergency Diesel and Gas Turbine Engine Driven Generator Sets § 112.50-5 Electric starting...

An Integrated Start-Up Method for Pumped Storage Units Based on a Novel Artificial Sheep Algorithm

Directory of Open Access Journals (Sweden)

Zanbin Wang

2018-01-01

Full Text Available Pumped storage units (PSUs are an important storage tool for power systems containing large-scale renewable energy, and the merit of rapid start-up enable PSUs to modulate and stabilize the power system. In this paper, PSU start-up strategies have been studied and a new integrated start-up method has been proposed for the purpose of achieving swift and smooth start-up. A two-phase closed-loop startup strategy, composed of switching Proportion Integration (PI and Proportion Integration Differentiation (PID controller is designed, and an integrated optimization scheme is proposed for a synchronous optimization of the parameters in the strategy. To enhance the optimization performance, a novel meta-heuristic called Artificial Sheep Algorithm (ASA is proposed and applied to solve the optimization task after a sufficient verification with seven popular meta-heuristic algorithms and 13 typical benchmark functions. Simulation model has been built for a China’s PSU and comparative experiments are conducted to evaluate the proposed integrated method. Results show that the start-up performance could be significantly improved on both indices on overshoot and start-up, and up to 34%-time consumption has been reduced under different working condition. The significant improvements on start-up of PSU is interesting and meaning for further application on real unit.

A fast-starting mechanical fish that accelerates at 40 m s-2

International Nuclear Information System (INIS)

Conte, J; Modarres-Sadeghi, Y; Watts, M N; Hover, F S; Triantafyllou, M S

2010-01-01

We have built a simple mechanical system to emulate the fast-start performance of fish. The system consists of a thin metal beam covered by a urethane rubber, the fish body and an appropriately shaped tail. The body form of the mechanical fish was modeled after a pike species and selected because it is a widely-studied fast-start specialist. The mechanical fish was held in curvature and hung in water by two restraining lines, which were simultaneously released by a pneumatic cutting mechanism. The potential energy in the beam was transferred into the fluid, thereby accelerating the fish. We measured the resulting acceleration, and calculated the efficiency of propulsion for the mechanical fish model, defined as the ratio of the final kinetic energy of the fish and the initially stored potential energy in the body beam. We also ran a series of flow visualization tests to observe the resulting flow patterns. The maximum start-up acceleration was measured to be around 40 m s -2 , with the maximum final velocity around 1.2 m s -1 . The form of the measured acceleration signal as function of time is quite similar to that of type I fast-start motions studied by Harper and Blake (1991 J. Exp. Biol. 155 175-92). The hydrodynamic efficiency of the fish was found to be around 10%. Flow visualization of the mechanical fast-start wake was also analyzed, showing that the acceleration peaks are associated with the shedding of two vortex rings in near-lateral directions.

Effect of crystallochemistry of starting materials on the rate of smectite to illite reaction

International Nuclear Information System (INIS)

Sato, Tsutomu; Isobe, Hiroshi; Ohnuki, Toshihiko; Murakami, Takashi

1995-01-01

A series of hydrothermal experiments was performed to determine the effect of layer charge of starting materials on the smectite to illite reaction rate that might be applied to nuclear-waste repository design. The experiments were conducted on K-saturated fractions of Wyoming smectite (SWy-1) and Tsukinuno smectite (SKu-F) in a closed system at temperatures of 95, 150, 200, 250, 300 C for run durations of up to 477 days with a 1:20 mass ratio of solid to deionized water. The mean layer charge and tetrahedral charge of SKu-F are larger than those of SWy-1. The proportion of smectite layers in illite/smectite interstratified minerals rapidly decreases, and then slowly decreases with increase in reaction time; a plot of ln (100/% smectite) vs. time produces two distinct straight lines in all experiments. These lines are suggestive of two first-order kinetic processes with different rates for this reaction; the first process has a greater rate than the second one. An Arrhenius plot of the reaction rates for each process produces a folding and straight lines for the first and second processes, respectively, suggesting that there are at least two parallel processes in the first process, and a dominant process is different between high- and low-temperature reactions. The activation energies of the first and second processes determined from the plots are the same for the two starting materials, meaning that the reaction mechanisms for the two starting materials are the same. However, the rate of the first process is different between the two starting materials, although that of the second process is similar. The difference in the rate of the first process results possibly from the difference in the amount of layer charge between the two starting smectites

Families & the North Carolina Smart Start Initiative.

Science.gov (United States)

Lowman, Betsy; Bryant, Donna; Zolotor, Adam

Smart Start is North Carolina's partnership between state government and local leaders, service providers, and families to better serve children under 6 years and their families. This study examined characteristics of families participating in Smart Start, their child care arrangements and family activities, and their need for and use of community…

Critical firing and misfiring boundary in a spark ignition methanol engine during cold start based on single cycle fuel injection

International Nuclear Information System (INIS)

Li, Zhaohui; Gong, Changming; Qu, Xiang; Liu, Fenghua; Sun, Jingzhen; Wang, Kang; Li, Yufeng

2015-01-01

The influence of the mass of methanol injected per cycle, ambient temperature, injection and ignition timing, preheating methods, and supplying additional liquefied petroleum gas (LPG) injection into the intake manifold on the critical firing and misfiring boundary of an electronically injection controlled spark ignition (SI) methanol engine during cold start were investigated experimentally based on a single cycle fuel injection with cycle-by-cycle control strategy. The critical firing and misfiring boundary was restricted by all parameters. For ambient temperatures below 16 °C, methanol engines must use auxiliary start-aids during cold start. Optimal control of the methanol injection and ignition timing can realize ideal next cycle firing combustion after injection. Resistance wire and glow plug preheating can provide critical firing down to ambient temperatures of 5 °C and 0 °C, respectively. Using an additional LPG injection into the intake manifold can provide critical firing down to an ambient temperature of −13 °C during cold start. As the ambient temperature decreases, the optimal angle difference between methanol injection timing and LPG injection timing for critical firing of a methanol engine increases rapidly during cold start. - Highlights: • A single cycle fuel injection and cycle-by-cycle control strategy are used to study. • In-cylinder pressure and instantaneous speed were used to determine firing boundary. • For the ambient temperatures below 16 °C, an auxiliary start-aids must be used. • A preheating and additional LPG were used to expand critical firing boundary. • Additional LPG can result in critical firing down to ambient temperature of −13 °C

En god start

DEFF Research Database (Denmark)

Sievertsen, Hans Henrik

I Danmark er det muligt at afvige fra reglen om, at barnet skal starte i skole det kalenderår, hvor barnet fylder 6 år. Det gør 10-15 procent af en årgang, mens 80-90 procent af børnene følger normen, og 2-3 procent starter i skole et år tidligere end normen, viser en analyse baseret på børn født i...

Automated start-up of EBR-II

International Nuclear Information System (INIS)

Kisner, R.A.

1989-01-01

Oak Ridge National Laboratory (ORNL) and Argonne National Laboratory (ANL) are undertaking a joint project to develop control philosophies, strategies, and algorithms for computer control of the start-up mode of the Experimental Breeder Reactor II (EBR-II). The major objective of this project is to show that advanced liquid-metal reactor (LMR) plants can be operated from low power to full power using computer control. Development of an automated control system with this objective in view will help resolve specific issues and provide proof through demonstration that automatic control for plant start-up is feasible. This paper describes the approach that will be used to develop such a system and some of the features it is expected to have. Structured, rule-based methods, which will provide start-up capability from a variety of initial plant conditions and degrees of equipment operability, will be used for accomplishing mode changes during plant start-up. Several innovative features will be incorporated such as signal, command, and strategy validation to maximize reliability, flexibility to accommodate a wide range of plant conditions, and overall utility. Continuous control design will utilize figures of merit to evaluate how well the controller meets the mission requirements. The operator interface will have unique ''look ahead'' features to let the operator see what will happen next. 15 refs., 7 figs., 1 tab

Stor matematik mellem Prado og Escorial

DEFF Research Database (Denmark)

Booss-Bavnbek, Bernhelm

2006-01-01

Rapport over Den Internationale Matematikerkongres 2006: Hvad rangerer højst i 2006? Stokastik er kommet hjem. Forholdet mellem ren og anvendt matematik. Historie og didatik. Dansk synlighed - storhed eller begyndende senilitet? Udgivelsesdato: December 2006...

Double stage dry-wet-fermentation - start-up of a pilot biogas plant

International Nuclear Information System (INIS)

Buschmann, Jeannette; Busch, Gunter; Burkhardt, Marko

2009-01-01

The Brandenburg University of Technology (BTU) has developed a double stage dry-wet fermentation process for fast and safe anaerobic degradation. Originally designed for treatment of organic wastes, this process allows using a wide variety of solid biodegradable materials. The dividing of hydrolysis and methanation in this process, allows an optimization of the different steps of biogas generation separately. The main advantages of the process are the optimum process control, an extremely stable process operation and a high gas productivity and quality. Compared to conventional processes, the retention times within the percolation stage (hydrolysis) are reduced considerably. In cooperation with the engineering and consulting company GICON, the technology was qualified further to an industrial scale. In 2007 a pilot plant, and, simultaneously, an industrial plant were built by GICON based on this double stage technology. Based on practical experience from the operation of laboratory fermentation plants, the commissioning of the pilot plant was planned, controlled and monitored by our institution. The start-up of a biogas plant of this type focuses mainly on the inoculation the of methane reactor. The growth of microbial populations and generation of a stable biocenosis within the methane reactor is essential and affects the duration of starting period as well as the methanation efficiency a long time afterwards. This paper concerns with start-up of a pilot biogas plant and discusses particular occurrences and effects during this period. (author)

Start and turn performances of elite sprinters at the 2016 European Championships in swimming.

Science.gov (United States)

Morais, Jorge E; Marinho, Daniel A; Arellano, Raul; Barbosa, Tiago M

2018-03-26

The aim of this study was to examine the performance characteristics of male and female finalists in the 100-m distance at the 2016 European Championships in swimming (long-course-metre). The performances of all 64 (32-males and 32-females) were analysed (8 swimmers per event; Freestyle, Backstroke, Breaststroke and Butterfly). A set of start and turn parameters were analysed. In the start main outcome, male swimmers were faster in Butterfly (5.71 ± 0.14s) and females in Freestyle (6.68 ± 0.28s). In the turn main outcome, male and female swimmers were faster in Freestyle (males: 9.55 ± 0.13s; females: 10.78 ± 0.28s). A significant and strong stroke effect was noted in the start and turn main outcome, in both sexes. In the start plus the turn combined, males and females were faster in Freestyle (males: 15.40 ± 0.20s; females: 17.45 ± 0.54s). The start and the turn combined accounted almost one-third of the total race time in all events, and non-significant differences (p > 0.05) were noted across the four swim strokes. Once this research made evident the high relevance of start and turns, it is suggested that coaches and swimmers should dedicate an expressive portion of the training perfecting these actions.

Fast-starting after a breath: air-breathing motions are kinematically similar to escape responses in the catfish Hoplosternum littorale

DEFF Research Database (Denmark)

Domenici, Paolo; Norin, Tommy; Bushnell, Peter G.

2015-01-01

Fast-starts are brief accelerations commonly observed in fish within the context of predator–prey interactions. In typical C-start escape responses, fish react to a threatening stimulus by bending their body into a C-shape during the first muscle contraction (i.e. stage 1) which provides a sudden......-breathing in this species is followed by escape-like C-start motions, presumably to minimise time at the surface and exposure to avian predators. These findings show that C-starts can occur in a variety of contexts in which fish may need to get away from areas of potential danger....

Do Specific Growth Drivers Exist for Firms? A Regional Analysis of Start-ups and Industrial Growth

Directory of Open Access Journals (Sweden)

PAUL I. OJEAGA

2016-06-01

Full Text Available The study of start-ups, have remained largely a micro economic issue. Firms are the key drivers of industrial sector GDP (or enterprise growth in countries across regions. Few studies have tried to examine the consequence of start-ups in the broad macroeconomics terms on enterprise growth in general with special emphasis on industrial sector output. This study provides a macroeconomic study of the effect of start- ups on industrial sector growth for countries in some specific geographical regions of the world. Panel data is utilized due to it obvious advantages such its ability to utilize a panel of short time frames and its suitability for controlling for omitted variable bias and unobservable heterogeneity across regions. The results show that start-ups remain an intrinsic variable for enterprise growth and industrial sector output discussion in general.

ATLAS starts moving in

CERN Multimedia

2004-01-01

The first large active detector component was lowered into the ATLAS cavern on 1 March. It consisted of the 8 modules forming the lower part of the central barrel of the tile hadronic calorimeter. The work of assembling the barrel, which comprises 64 modules, started the following day.

Product innovation and commercialization in lean global start-ups

DEFF Research Database (Denmark)

Tanev, Stoyan; Rasmussen, Erik Stavnsager; Zijdemans, Erik

2015-01-01

The paper examines the distinctive characteristics of product innovation and commercialization in Lean Global Start-up (LGS) – new technology firms which have adopted a lean and global path from or near to their inception. It suggests an uncertainty vs risk framework which allows integrating two...... research streams – Born Global (BG) firms and lean start-ups. In addition to its integrative theoretical value, the paper offers insights for lean start-up managers dealing with the challenges of a global start....

Starting a business through a franchise

Directory of Open Access Journals (Sweden)

Dubravka Mahaček

2013-12-01

Full Text Available A business can be launched by establishing a new entity, purchasing an existing entity or through a franc - hise. There are certain prerequisites for starting a business, the most important ones being a quality idea and start-up capital. Potential start-up difficulties are inadequate financing, existing competition as well as the process of building your own market position. By purchasing an existing business some risks may be avoided and the opportunity for gaining profit may arise. Profitable operation is possible only if this business has up-to-date products and no outstanding liabilities. This paper discusses franchising business opportunities and the requisite investments and costs, which will bring success if they are accompanied by franchisee’s efforts. The paper aims to present the main characteristics of a franchise business, the necessary investment and the costs which arise in the process, as well as advantages, disadvantages and experiences with this kind of business

Guidelines for starting today's private practice

Directory of Open Access Journals (Sweden)

Schmitz ED

2012-11-01

Full Text Available No abstract available. Article truncated at 150 words. Starting a new practice may seem like a daunting task. The purpose of this article is to demystify the process of creating a new practice from the beginning. The cardinal rule is to keep costs low and not to outsource work that can easily be performed by any competent physician and staff. You do not need a manager, lawyer, business partner, coder or biller individually; you may be able to perform many of these services yourself. What you do need is a commitment to making your practice a success. Do not spend too much on your office space, furnishings or equipment. Start with the bare essentials. Immediately start applying to all insurance companies especially Medicare. Request an employer identification number. Set up a basic business banking account and submit the account number to the insurance companies you plan to work with. You can purchase an entire electronic healthcare record (EHR …

40 CFR 86.536-78 - Engine starting and restarting.

Science.gov (United States)

2010-07-01

... equipped with automatic chokes shall be operated according to the instructions in the manufacturer's... transmission shall be placed in gear 15 seconds after the engine is started. If necessary, braking may be... starting procedure, the engine (automatic and manual choke engines) shall be started by opening the...

Prediction of the stability of BWR reactors during the start-up process

International Nuclear Information System (INIS)

Ruiz E, J.A.; Castillo D, R.; Blazquez M, J.B.

2004-01-01

The Boiling Water Reactors (BWR) are susceptible of uncertainties of power when they are operated to low flows of coolant (W) and high powers (P), being presented this situation mainly in the start-up process. The start-up process could be made but sure if the operator knew the value of the stability index Decay reason (Dr) before going up power and therefore to guarantee the stability. The power and the flow are constantly measures, the index Dr could also be considered its value in real time. The index Dr depends on the power, flow and many other values, such as, the distribution of the flow axial and radial neutronic, the temperature of the feeding water, the fraction of holes and other thermohydraulic and nuclear parameters. A simple relationship of Dr is derived leaving of the pattern reduced of March-Leuba, where three independent variables are had that are the power, the flow and a parameter that it contains the rest of the phenomenology, that is to say all the other quantities that affect the value of Dr. This relationship developed work presently and verified its prediction with data of start-up of commercial reactors could be used for the design of a practical procedure practice of start-up, what would support to the operator to prevent this type of events of uncertainty. (Author)

NEW VENTURE CREATION: HOW START-UPS GROW?

Directory of Open Access Journals (Sweden)

AIDIN SALAMZADEH

Full Text Available ABSTRACT Start-ups, often seen as sources of innovation and change, are prone to failure and accordingly they are attracting considerable attention not least from policy makers and Government officials. However, the various new venture creation studies that have emerged since the early 1980s lack cohesiveness, and the domain remains controversial. This article not only exposes the limitations of the existing body of understanding on the topic but attempts to develop a more comprehensive and comprehendible framework for start up (new venture creation. To do so it uses the frameworks proposed by Whetten, and March and Smith to develop 11 propositions. The resultant model suggests that the creation of a start up involves the identification of an idea or opportunity by an entrepreneur who subsequently organizes a series of activities, mobilizes resources and creates competence using his/her networks in an environment in order to create value. It sheds light on the start-up (new venture creation process and has relevance for entrepreneurs, policy makers and researchers.

34 CFR 200.80 - Migrant Education Even Start Program definition.

Science.gov (United States)

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Migrant Education Even Start Program definition. 200.80... DISADVANTAGED Even Start Family Literacy Program § 200.80 Migrant Education Even Start Program definition. Eligible participants under the Migrant Education Even Start Program (MEES) must meet the definitions of a...

Start-up Funding via Equity Crowdfunding in Germany

DEFF Research Database (Denmark)

Angerer, Martin; Brem, Alexander; Kraus, Sascha

2017-01-01

Entrepreneurs often struggle to find sufficient funding for their start-ups. A relatively new way for companies to attract capital is via an internet platform, locating investors who in return receive something in return for their ventures. Equity crowdfunding is one of several types of crowdfund......Entrepreneurs often struggle to find sufficient funding for their start-ups. A relatively new way for companies to attract capital is via an internet platform, locating investors who in return receive something in return for their ventures. Equity crowdfunding is one of several types...... of crowdfunding, and is also known as crowdinvesting in the German-speaking realm. This article predominantly advances the scientific knowledge regarding the success factors of equity crowdfunding for German start-ups. The study conducted nine qualitative interviews with start-ups and crowdinvesting platforms....... Its first result is that German start-ups select crowdinvesting because (1) it is a funding opportunity and (2) it has an expected marketing effect. To organize the results of relevant success factors, the Crowdinvesting Success Model was designed by the researchers. This supports German entrepreneurs...

Customized broadband sloan-filters for the JST/T250 and JAST/T80 telescopes: summary of results

Science.gov (United States)

Brauneck, U.; Sprengard, R.; Bourquin, S.; Marín-Franch, A.

2017-09-01

The Centro de Estudios de Fisica del Cosmos de Aragon (CEFCA) will conduct a photometric sky survey with 2 new telescopes recently setup on the Javalambre mountain in Spain: the JST/T250 is a 2.55m telescope with a plate scale of 22.67"/mm and a 3° diameter field of view (FoV) and the auxiliary telescope JAST/T80 with a 82cm primary mirror and a FoV of 2 deg diameter. A multiple CCD (9k-by-9k array size, 10μm pixel size) mosaic camera is used in combination with filter trays or filter wheels, each containing a multitude of filters in dimensions of 101.7x96.5mm or 106.8x106.8mm. For this project, SCHOTT manufactured 56 specially designed narrow band steep edged bandpass interference filters and 5 broadband sloan-filters which were completed only recently. We report here on the results of the broadband sloanfilters with transmission bands of 324-400nm (sloan-u), 400-550nm (sloan-g), 550-700nm (sloan-r), 695-850nm (sloan-i) and 830-1200nm (sloan-z). The filters are composed of SCHOTT filterglasses and clearglass substrates coated with interference filters and represent an improvement of broadband sloan filters commonly used in astronomy. Inspite of the absorptive elements, the filters show maximum possible transmissions achieved by magnetron sputtered filter coatings. In addition the blocking of the filters is better than OD5 in the range 250-1050nm. A high image quality required a low transmitted wavefront error (<λ/8 locally, respectively <λ/2 globally) which was achieved by combining up to 2 substrates. We report on the spectral and interferometric results measured on the filters.

START: An essential step in a new era

International Nuclear Information System (INIS)

Lockwood, D.

1991-01-01

After more than nine years of negotiations, the US and the Soviet Union signed the Strategic Arms Reduction Treaty (START) in Moscow on July 31, 1991. While the world has changed dramatically since 1982 when the START negotiations began, the treaty remains very much in the US interest. START exacts deep cuts in the most destabilizing and dangerous US and Soviet strategic weapons, and will lead to substantial overall reductions in the strategic nuclear forces of both sides. Moreover, the agreement will create a formal, structured, and predictable strategic environment. It will also impose on the Soviet Union or its successors a legally binding set of obligations that will be in effect for many years, regardless of changes in leadership or form of government. START, with its extensive series of intrusive, cooperative, and technical verification measures, will greatly enhance US knowledge about Soviet strategic nuclear forces and activities. The force reductions, predictability, and transparency that START will lock in will be especially valuable if the Soviet Union breaks into independent states or if there is a resurgence of hard-line political forces in Moscow. In addition, START will provide a framework for deeper reductions that could further reduce the risk of nuclear war, stimulate an increasingly cooperative relationship between the US and the Soviet Union or its successors, and save tens of billions of dollars. Finally, by demonstrating a US and Soviet commitment to reversing the arms race, START should reinforce efforts to stem the proliferation of nuclear weapons among both newly independent Soviet republics and nuclear threshold states, and to ensure success at the Nonproliferation Treaty (NPT) extension conference in 1995

20 CFR 404.241 - 1977 simplified old-start method.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false 1977 simplified old-start method. 404.241... DISABILITY INSURANCE (1950- ) Computing Primary Insurance Amounts Old-Start Method of Computing Primary Insurance Amounts § 404.241 1977 simplified old-start method. (a) Who is qualified. To qualify for the old...

Neutron activation analysis

International Nuclear Information System (INIS)

Okada, Yukiko

2005-01-01

Trends and progress in neutron activation analysis (NAA) for the period starting in 1999 to 2003 are presented. Numbers of published reports on NAA are decreasing year by year as investigated from the database JST and NUCLEN. Summary reports on the international conferences held on NAA are followed by classifying according to the fields: various measurement techniques and application fields. Specially focused topics are newly developed techniques for measuring trace elements with high sensitivity and high accuracy such as (1) by diminishing the Compton-background gamma-rays using anti-coincidence technique, (2) by using prompt-gamma rays measurement method (PGAA) and (3) by using a gamma-ray detector array (GEMINI), which has succeeded in a simultaneous quantification of 27 elements from a standard rock sample having a weight of only 10 milligrams, and others. These techniques will be applied in the space and earth sciences and medical fields. (S. Ohno)

1-D hybrid code for FRM start-up

International Nuclear Information System (INIS)

Stark, R.A.; Miley, G.H.

1982-01-01

A one-D hybrid has been developed to study the start-up of the FRM via neutral-beam injection. The code uses a multi-group numerical model originally developed by J. Willenberg to describe fusion product dynamics in a solenoidal plasma. Earlier we described such a model for use in determining self-consistent ion currents and magnetic fields in FRM start-up. However, consideration of electron dynamics during start-up indicate that the electron current will oppose the injected ion current and may even foil the attempt to achieve reversal. For this reason, we have combined the multi-group ion (model) with a fluid treatment for electron dynamics to form the hybrid code FROST (Field Reversed One-dimensional STart-up). The details of this merger, along with sample results of operation of FROST, are given

Fusion reactor start-up without an external tritium source

Energy Technology Data Exchange (ETDEWEB)

Zheng, S., E-mail: Shanliang.Zheng@ccfe.ac.uk; King, D.B.; Garzotti, L.; Surrey, E.; Todd, T.N.

2016-02-15

reactors. The preliminary results suggest that initial operation in D–D with continual feedback into the plasma of the tritium produced enables a fusion reactor designed solely for D–T operation to start-up in an acceptably short time-scale without the need for any external tritium source.

Open-Start Mathematics Problems: An Approach to Assessing Problem Solving

Science.gov (United States)

Monaghan, John; Pool, Peter; Roper, Tom; Threlfall, John

2009-01-01

This article describes one type of mathematical problem, open-start problems, and discusses their potential for use in assessment. In open-start problems how one starts to address the problem can vary but they have a correct answer. We argue that the use of open-start problems in assessment could positively influence classroom mathematics…

Smart Start Evaluation Plan.

Science.gov (United States)

Bryant, Donna; Burchinal, Margaret; Buysse, Virginia; Kotch, Jonathan; Maxwell, Kelly; Neenan, Peter; Noblit, George; Orthner, Dennis; Peisner-Feinberg, Ellen; Telfair, Joseph

Smart Start is North Carolina's partnership between state government and local leaders, service providers, and families to better serve children under 6 years of age and their families. This report describes the comprehensive plan to evaluate the state and local goals and objectives of the program, focusing on the components addressing the…

Elaboration of a velocity model of the Bogota basin (Colombia) based on microtremors arrays measurements, gravity data, and geological information

Science.gov (United States)

Pulido Hernandez, N. E.; Senna, S.; Garcia, H. Mr; Montejo, S.; Reyes, J. C.

2017-12-01

Bogotá, a megacity with almost 8 million inhabitants is prone to a significant earthquake hazard due to nearby active faults as well as subduction megathrust earthquakes. The city has been severely affected by many historical earthquakes in the last 500 years, reaching MM intensities of 8 or more in Bogotá. The city is also located at a large lacustrine basin composed of extremely soft soils which may strongly amplify the ground shaking from earthquakes. The basin extends approximately 40 km from North to South, is bounded by the Andes range to the East and South, and sharply deepens towards the West of Bogotá. The city has been the subject of multiple microzonations studies which have contributed to gain a good knowledge on the geotechnical zonation of the city and tectonic setting of the region. To improve our knowledge on the seismic risk of the city as one of the topics, we started a 5 years project sponsored by SATREPS (a joint program of JICA and JST), entitled "Application of state of the art technologies to strengthen research and response to seismic, volcanic and tsunami events and enhance risk management in Colombia (2015-2019)". In this paper we will show our results for the elaboration of a velocity model of the city. To construct a velocity model of the basin we conducted multi-sized microtremors arrays measurements (radius from 60 cm up to 1000 m) at 41 sites within the city. We calculated dispersion curves and inferred velocity profiles at all the sites. We combine these results with gravity measurements as well as geological information to obtain the initial velocity model of the basin. Ackowledgments This research is funded by SATREPS (a joint program of JICA and JST).

Aloittelevan start-up yrittäjän opas rahoitukseen

OpenAIRE

Lamminsalo, Matti

2015-01-01

Opinnäytetyö käsittelee start-up rahoitusta ja siihen liittyviä toimintamalleja. Opinnäytetyön tuloksena on syntynyt opaskirja: Aloittelevan start-up yrittäjän opas rahoitukseen. Research about start-up ecosystem with investment aspect. As a result guidebook for start-up investment and how to raise a fund was writen.

Roads Leading to Self-Employment: Comparing Transgenerational Entrepreneurs and Self-Made Start-Ups

OpenAIRE

Blumberg, Boris; Pfann, Gerard Antonie

2015-01-01

This paper studies the event history of business foundation and distinguishes between transgenerational entrepreneurship and self-made start-ups. Three theoretical concepts of human, financial and social capital are linked to investigate variations over time in the decision process to become self-employed. Data from a cohort of Dutch inhabitants born in 1939/1940 who have been interviewed three times during their lives in 1952, 1983, and 1993 allows testing theoretical hypotheses that state c...

Personal and Public Start Pages in a library setting

NARCIS (Netherlands)

Kieft-Wondergem, Dorine

Personal and Public Start Pages are web-based resources. With these kind of tools it is possible to make your own free start page. A Start Page allows you to put all your web resources into one page, including blogs, email, podcasts, RSSfeeds. It is possible to share the content of the page with

Head Start Participants, Programs, Families and Staff in 2013

Science.gov (United States)

Walker, Christina

2014-01-01

Head Start programs provide poor children and their families with comprehensive early education and support services. Each year, programs are required to submit a Program Information Report (PIR) to the Office of Head Start on participating children, pregnant women, and families, as well as the staff serving the Head Start population. In 2013, the…

Measuring the phase difference in network and residual voltages under the GTsN-195M pump self-starting

International Nuclear Information System (INIS)

Druba, V.V.; Druba, T.A.; Reznik, V.R.

1989-01-01

Determination of time dependence of phase difference of residual voltage on motor windings of the main circulation pumps (MCP) and voltage of power supply section under MCP self-starting under conditions of short-time breaks in electric power supply is one of the main problems to which reliability and safety of NPP operation is related. A method to measure this dependence in real conditions in case of MCP free run-out and run-out in generating mode is suggested. The method considered is used for tests of the Kalinin NPP-2 MCP-195M self-starting. Analysis of run-out curves in the case of a break in MCP power supply for 1.8 s shows that the most favourable conditions for MCP self-starting are 0.63±0.03 s after de-energizing. 2 refs.; 3 figs.; 1 tab

A novel dimmable LED driver with soft-start and UVLO circuits

International Nuclear Information System (INIS)

Jiang Jinguang; Tan Gaojian; Zhou Xifeng; Zhang Zeyu

2015-01-01

A fully integrated LED driver based on a current mode PWM boost DC—DC converter with constant output current is proposed. In order to suppress the inrush of current and the overshoot voltage at the start up state, a soft-start circuit is adopted. Additionally, to adjust the LED brightness without color variation over the full dimming range and achieve high efficiency, a PWM dimming circuit is presented. Furthermore, to keep the loop stability of the LED driver, an internal slope compensation network is designed to avoid the sub-harmonic oscillation when the duty cycle exceeds 50%. Finally, a UVLO circuit is adopted to improve the reliability of the LED driver against the input voltage changing. The LED driver has been fabricated with a standard 0.5 μm CMOS process, and only occupies 1.21 × 0.76 mm 2 . Experimental results show that the brightness of the LED can be adjusted by an off-chip PWM signal with a wide adjusting range. The inductor current and output current increase smoothly over the whole load range. The chip is in the UVLO condition when the input voltage is below 2.18 V and has achieved about 137 μs typical start-up time. (semiconductor integrated circuits)

START TO PLAY TENNIS LIKE INCETIVE TO DEVELOPMENT SPORTS IN MONTENEGRO

Directory of Open Access Journals (Sweden)

Dimitrije Rašović

2006-06-01

Full Text Available At the end of 19 centuries tenis like popular game has srarted to play in Vojvodina. At 1880 tennis grassy courts was built in Senta and from that year it started to play in Vojvodina. Austrohungarion officers propageted tennis who were built tennis courts in their barracks but they was built courts in city parks. At 1892 the first tennis competition organised which mean that the first clubs probably had establishment befor thet year. Later at 1894 tennis started to play at palace of greand duke Nikola in Cetinje. Later tennis started to play in srbia at 1900. At that year people organised the first tennis tournament in vrsac. Momcilo Tapavica the first sout slovenion who was montegrion descent who was participat at first modern olimpic’s games in atina at 1896 he gave great countrabucsion developeted tennis sport in Montenegro. Momcilo Tapavica come to palase of graund duke’s Nikola at 1902 and ofter thet date his all family moved to Herceg-Novi and they spent all time to secound world war. At first olimpic’s games Momcilo Tapavica took parr in these sports/tennis, life weights, wrestling. Certain thet like talented sportman he gave great contabution not only in tennis than he gave contribution in the other sports in Montenegro.

On electrode erosion in fluorescent lamps during instant start

Energy Technology Data Exchange (ETDEWEB)

Hadrath, S.

2006-09-15

A fluorescent lamp driven with an 'instant start electronic control gear' starts in a glow mode. In the glow mode, which lasts typically for tens of milliseconds, the cathode fall exceeds hundreds of volts. This causes high energy ion bombardment of the electrode which heats the electrode, and induces a transition from glow to arc mode. In the arc mode the electrode emits thermionically and the cathode fall drops to the 12 - 15 V range. Unfortunately, the high energy ion bombardment during the glow mode leads also to intense sputtering of electrode material, including tungsten as well as emitter. Thus, instant started fluorescent lamps often suffer from early failures due to coil fracture. Therefore, the investigation of tungsten erosion during instant start is necessary and was the main goal of this work. The density of neutral atomic tungsten is determined by laser-induced fluorescence (LIF) and optical emission spectroscopy measurements (OES). Investigations are performed on a low-pressure argon dc discharge and on commercial fluorescent lamps. To include the entire temperature profile along the electrode the diffuse and spot operation modes of the dc lamp are studied experimentally and theoretically. The measured dependencies of the cathode temperature along the coil on the discharge and heating parameters are compared with the calculated results. For the first time the tungsten erosion during instant start of commercial fluorescent lamps was experimentally investigated in this work. The erosion process could be related to sputtering. A reconstruction of the temporal evolution of the absolute tungsten population density of the ground state during the glow mode was presented. The sputtered tungsten density increases immediately with the ignition, reaches a maximum where the discharge contracts at the end of the glow mode, and decreases some milliseconds before the glow-to-arc transition takes place. The maximum tungsten density was observed within a

Getting started with Go

CERN Multimedia

CERN. Geneva

2015-01-01

No, not the Chinese boardgame, the programming language that ironically Google made difficult to google for. You may have heard of Golang, and are wondering whether you should learn it. The answer is that of course you should, and this talk should explain why and point you at the best resources to get started.

Getting started with UDOO

CERN Document Server

Palazzetti, Emanuele

2015-01-01

If you are an Android developer who wants to learn how to use UDOO to build Android applications that are capable of interacting with their surrounding environment, then this book is ideal for you. Learning UDOO is the next great step to start building your first real-world prototypes powered by the Android operating system.

TrustRank: a Cold-Start tolerant recommender system

Science.gov (United States)

Zou, Haitao; Gong, Zhiguo; Zhang, Nan; Zhao, Wei; Guo, Jingzhi

2015-02-01

The explosive growth of the World Wide Web leads to the fast advancing development of e-commerce techniques. Recommender systems, which use personalised information filtering techniques to generate a set of items suitable to a given user, have received considerable attention. User- and item-based algorithms are two popular techniques for the design of recommender systems. These two algorithms are known to have Cold-Start problems, i.e., they are unable to effectively handle Cold-Start users who have an extremely limited number of purchase records. In this paper, we develop TrustRank, a novel recommender system which handles the Cold-Start problem by leveraging the user-trust networks which are commonly available for e-commerce applications. A user-trust network is formed by friendships or trust relationships that users specify among them. While it is straightforward to conjecture that a user-trust network is helpful for improving the accuracy of recommendations, a key challenge for using user-trust network to facilitate Cold-Start users is that these users also tend to have a very limited number of trust relationships. To address this challenge, we propose a pre-processing propagation of the Cold-Start users' trust network. In particular, by applying the personalised PageRank algorithm, we expand the friends of a given user to include others with similar purchase records to his/her original friends. To make this propagation algorithm scalable to a large amount of users, as required by real-world recommender systems, we devise an iterative computation algorithm of the original personalised TrustRank which can incrementally compute trust vectors for Cold-Start users. We conduct extensive experiments to demonstrate the consistently improvement provided by our proposed algorithm over the existing recommender algorithms on the accuracy of recommendations for Cold-Start users.

Sure start: voices of the 'hard-to-reach'.

Science.gov (United States)

Coe, C; Gibson, A; Spencer, N; Stuttaford, M

2008-07-01

This research aimed to look in depth at the factors affecting the ability of four Sure Start local programmes, based in a multicultural Midlands city, to engage with 'hard-to-reach' populations. A variety of research strategies and methods were employed. Geographical information systems, participatory research methods and interviews were used in order to understand the extent of the challenge, and hear first hand, why parents may not get involved with Sure Start. The mapping exercise involved collation and mapping of postcode data with respect to boundaries and potential and actual users of Sure Start services. This made possible the identification of any geographical patterning in the distribution of service users and non-users. Participatory research methods were used with parents, enabling them to conduct short interviews within their own communities and make sense of the data collected. Interviews were also conducted with 70 parents across the city, recruited through local schools. The results indicate that parental decisions regarding Sure Start are the product of a complex interaction between numerous factors which may act as either barriers or facilitators to service utilization. The results suggest that a multi-method approach to data collection is useful and appropriate in gaining access to those parents who are non-users of the Sure Start services and enabling their voices to be heard. These findings offer some explanations and insight into the apparent ambivalent attitudes of some families toward Sure Start services. Implications for future practice are discussed.

A race against time: can CO-OPs and provider start-ups survive in the health insurance marketplaces?

Science.gov (United States)

Eggbeer, Bill

2015-12-01

> The Affordable Care Act's state and federal health insurance marketplaces, designed to provide affordable insurance coverage to individuals and small groups, are proving hostile territory to new market entrants. Efforts to inject competition into the marketplaces are being challenged by the wide-scale withdrawal o consumer-operated and oriented plans (CO-OPs). Meanwhile, premiums appear likely to increase for consumers as plans seek to balance medical losses. Flaws in the "Three R's" (reinsurance, risk corridors, and risk-adjustment) program are viewed as a threat to the survival of CO-OPs and start-ups.

Emissions of polychlorinated diphenyl ethers from a municipal solid waste incinerator during the start-up operation

International Nuclear Information System (INIS)

Yang, Jing-Sing; Lin, Sheng-Lun; Lin, Ta-Chang; Wu, Yee-Lin; Wang, Lin-Chi; Chang-Chien, Guo-Ping

2015-01-01

Highlights: • This is the first study on the PCDE emission during a MSWI start-up procedure. • The highest PCDE level occurred similar to the PCDD/F reformation temperature. • The pollution control were modified and reduce 86% PCDE peak emission. • Multiple start-ups are analyzed for their effects on the annual PCDE emission. - Abstract: This study examines the emissions of polychlorinated diphenyl ethers (PCDEs) during the start-up processes of a municipal solid waste incinerator (MSWI). Both normal and modified emission control start-ups were tested. Fifteen samples were taken from the flue gas with increasing furnace temperature. Peak PCDE concentrations of 1.48–10.3 ng/Nm 3 were observed at 8–11 h after the start of combustion, when the furnace temperature was in the range of 267–440 °C, that also needed for PCDD/F formation by de novo synthesis. The PCDE emissions could thus, be reduced by current control techniques. Furthermore, the modified control strategies inhibited PCDE formation at the beginning of combustion, and led to an 86% reduction in the maximum PCDE concentration. The overall start-up emissions were calculated as 1.01–3.08 mg, while the annual PCDE emissions with one start-up operation were found to be 7.48–9.64 mg. However, total PCDE emissions will increase by 12–69% if the number of start-up runs increases to between two and eight times per year. Consequently, the prevention of the unnecessary start-ups and advanced activation of the related emission control system are both efficient ways to reduce PCDE emissions.

Emissions of polychlorinated diphenyl ethers from a municipal solid waste incinerator during the start-up operation

Energy Technology Data Exchange (ETDEWEB)

Yang, Jing-Sing [Department of Environmental Engineering, National Cheng Kung University, Tainan 70101, Taiwan (China); Lin, Sheng-Lun, E-mail: cbmsgml@gmail.com [Department of Civil Engineering and Geomatics, Cheng Shiu University, Kaohsiung 83347, Taiwan (China); Super Micro Mass Research and Technology Center, Cheng Shiu University, Kaohsiung 83347, Taiwan (China); Lin, Ta-Chang; Wu, Yee-Lin [Department of Environmental Engineering, National Cheng Kung University, Tainan 70101, Taiwan (China); Wang, Lin-Chi [Department of Civil Engineering and Geomatics, Cheng Shiu University, Kaohsiung 83347, Taiwan (China); Chang-Chien, Guo-Ping, E-mail: guoping@csu.edu.tw [Super Micro Mass Research and Technology Center, Cheng Shiu University, Kaohsiung 83347, Taiwan (China); Department of Cosmetic and Fashion Styling, Kaohsiung 83347, Taiwan (China)

2015-12-15

Highlights: • This is the first study on the PCDE emission during a MSWI start-up procedure. • The highest PCDE level occurred similar to the PCDD/F reformation temperature. • The pollution control were modified and reduce 86% PCDE peak emission. • Multiple start-ups are analyzed for their effects on the annual PCDE emission. - Abstract: This study examines the emissions of polychlorinated diphenyl ethers (PCDEs) during the start-up processes of a municipal solid waste incinerator (MSWI). Both normal and modified emission control start-ups were tested. Fifteen samples were taken from the flue gas with increasing furnace temperature. Peak PCDE concentrations of 1.48–10.3 ng/Nm{sup 3} were observed at 8–11 h after the start of combustion, when the furnace temperature was in the range of 267–440 °C, that also needed for PCDD/F formation by de novo synthesis. The PCDE emissions could thus, be reduced by current control techniques. Furthermore, the modified control strategies inhibited PCDE formation at the beginning of combustion, and led to an 86% reduction in the maximum PCDE concentration. The overall start-up emissions were calculated as 1.01–3.08 mg, while the annual PCDE emissions with one start-up operation were found to be 7.48–9.64 mg. However, total PCDE emissions will increase by 12–69% if the number of start-up runs increases to between two and eight times per year. Consequently, the prevention of the unnecessary start-ups and advanced activation of the related emission control system are both efficient ways to reduce PCDE emissions.

Are the new starting block facilities beneficial for backstroke start performance?

Science.gov (United States)

de Jesus, Karla; de Jesus, Kelly; Abraldes, J Arturo; Medeiros, Alexandre Igor Araripe; Fernandes, Ricardo J; Vilas-Boas, João Paulo

2016-01-01

We aimed to analyse the handgrip positioning and the wedge effects on the backstroke start performance and technique. Ten swimmers completed randomly eight 15 m backstroke starts (four with hands on highest horizontal and four on vertical handgrip) performed with and without wedge. One surface and one underwater camera recorded kinematic data. Standardised mean difference (SMD) and 95% confidence intervals (CI) were used. Handgrip positioning did not affect kinematics with and without wedge use. Handgrips horizontally positioned and feet over wedge displayed greater knee angular velocity than without it (SMD = -0.82; 95% CI: -1.56, -0.08). Hands vertically positioned and feet over wedge presented greater take-off angle (SMD = -0.81; 95% CI: -1.55, -0.07), centre of mass (CM) vertical positioning at first water contact (SMD = -0.97; 95% CI: -1.87, -0.07) and CM vertical velocity at CM immersion (SMD = 1.03; 95% CI: 0.08, 1.98) when comparing without wedge use. Swimmers extended the hip previous to the knee and ankle joints, except for the variant with hands vertically positioned without wedge (SMD = 0.75; 95% CI: -0.03, 1.53). Swimmers should preserve biomechanical advantages achieved during flight with variant with hands vertically positioned and wedge throughout entry and underwater phase.

Head Start at Ages 3 and 4 versus Head Start Followed by State Pre-K: Which Is More Effective?

Science.gov (United States)

Jenkins, Jade Marcus; Farkas, George; Duncan, Greg J.; Burchinal, Margaret; Vandell, Deborah Lowe

2016-01-01

As policy-makers contemplate expanding preschool opportunities for low-income children, one possibility is to fund two, rather than one year of Head Start for children at ages 3 and 4. Another option is to offer one year of Head Start followed by one year of pre-k. We ask which of these options is more effective. We use data from the Oklahoma…

Impacts of visuomotor sequence learning methods on speed and accuracy: Starting over from the beginning or from the point of error.

Science.gov (United States)

Tanaka, Kanji; Watanabe, Katsumi

2016-02-01

The present study examined whether sequence learning led to more accurate and shorter performance time if people who are learning a sequence start over from the beginning when they make an error (i.e., practice the whole sequence) or only from the point of error (i.e., practice a part of the sequence). We used a visuomotor sequence learning paradigm with a trial-and-error procedure. In Experiment 1, we found fewer errors, and shorter performance time for those who restarted their performance from the beginning of the sequence as compared to those who restarted from the point at which an error occurred, indicating better learning of spatial and motor representations of the sequence. This might be because the learned elements were repeated when the next performance started over from the beginning. In subsequent experiments, we increased the occasions for the repetitions of learned elements by modulating the number of fresh start points in the sequence after errors. The results showed that fewer fresh start points were likely to lead to fewer errors and shorter performance time, indicating that the repetitions of learned elements enabled participants to develop stronger spatial and motor representations of the sequence. Thus, a single or two fresh start points in the sequence (i.e., starting over only from the beginning or from the beginning or midpoint of the sequence after errors) is likely to lead to more accurate and faster performance. Copyright © 2016 Elsevier B.V. All rights reserved.

Dynamic usage of transcription start sites within core promoters

DEFF Research Database (Denmark)

Kawaji, Hideya; Frith, Martin C; Katayama, Shintaro

2006-01-01

BACKGROUND: Mammalian promoters do not initiate transcription at single, well defined base pairs, but rather at multiple, alternative start sites spread across a region. We previously characterized the static structures of transcription start site usage within promoters at the base pair level......, based on large-scale sequencing of transcript 5' ends. RESULTS: In the present study we begin to explore the internal dynamics of mammalian promoters, and demonstrate that start site selection within many mouse core promoters varies among tissues. We also show that this dynamic usage of start sites...... is associated with CpG islands, broad and multimodal promoter structures, and imprinting. CONCLUSION: Our results reveal a new level of biologic complexity within promoters--fine-scale regulation of transcription starting events at the base pair level. These events are likely to be related to epigenetic...

Starting lithium prophylaxis early v. late in bipolar disorder

DEFF Research Database (Denmark)

Kessing, Lars Vedel; Vradi, Eleni; Andersen, Per Kragh

2014-01-01

BACKGROUND: No study has investigated when preventive treatment with lithium should be initiated in bipolar disorder. AIMS: To compare response rates among patients with bipolar disorder starting treatment with lithium early v. late. METHOD: Nationwide registers were used to identify all patients...... with a diagnosis of bipolar disorder in psychiatric hospital settings who were prescribed lithium during the period 1995-2012 in Denmark (n = 4714). Lithium responders were defined as patients who, following a stabilisation lithium start-up period of 6 months, continued lithium monotherapy without being admitted...... to hospital. Early v. late intervention was defined in two ways: (a) start of lithium following first contact; and (b) start of lithium following a diagnosis of a single manic/mixed episode. RESULTS: Regardless of the definition used, patients who started lithium early had significantly decreased rates of non...

Psychiatric Advance Directives: Getting Started

Science.gov (United States)

... News Legal Issues Search for: About PADs A psychiatric advance directive (PAD) is a legal document that ... decisions during a mental health crisis. Getting Started Psychiatric advance directives (PADs) are relatively new legal instruments ...

Starting up the upstarts.

Science.gov (United States)

Greene, J

1997-12-20

Venture capitalists pour $1 billion a year into health care--and that investment may be the most overlooked indicator of new business opportunities. Signs show that companies focused on consolidation and cost-cutting are off the A list for risk capital. Instead, venture capitalists are targeting start-ups that save money on the front lines by truly managing care.

Producing Acetic Acid of Acetobacter pasteurianus by Fermentation Characteristics and Metabolic Flux Analysis.

Science.gov (United States)

Wu, Xuefeng; Yao, Hongli; Liu, Qing; Zheng, Zhi; Cao, Lili; Mu, Dongdong; Wang, Hualin; Jiang, Shaotong; Li, Xingjiang

2018-03-19

The acetic acid bacterium Acetobacter pasteurianus plays an important role in acetic acid fermentation, which involves oxidation of ethanol to acetic acid through the ethanol respiratory chain under specific conditions. In order to obtain more suitable bacteria for the acetic acid industry, A. pasteurianus JST-S screened in this laboratory was compared with A. pasteurianus CICC 20001, a current industrial strain in China, to determine optimal fermentation parameters under different environmental stresses. The maximum total acid content of A. pasteurianus JST-S was 57.14 ± 1.09 g/L, whereas that of A. pasteurianus CICC 20001 reached 48.24 ± 1.15 g/L in a 15-L stir stank. Metabolic flux analysis was also performed to compare the reaction byproducts. Our findings revealed the potential value of the strain in improvement of industrial vinegar fermentation.

Frequency Control Strategy for Black Starts via PMSG-Based Wind Power Generation

Directory of Open Access Journals (Sweden)

Yi Tang

2017-03-01

Full Text Available The use of wind power generation (WPG as a source for black starts will significantly enhance the resiliency of power systems and shorten their recovery time from blackouts. Given that frequency stability is the most serious issue during the initial recovery period, virtual inertia control can enable wind turbines to provide frequency support to an external system. In this study, a general procedure of WPG participating in black starts is presented, and the key issues are discussed. The adaptability of existing virtual inertia control strategies is analyzed, and improvement work is performed. A new coordinated frequency control strategy is proposed based on the presented improvement work. A local power network with a permanent-magnet synchronous generator (PMSG-based wind farm is modeled and used to verify the effectiveness of the strategy.

The Lean and Global Start-up

DEFF Research Database (Denmark)

Tanev, Stoyan; Rasmussen, Erik Stavnsager

For several decades researchers have studied start-up companies with a focus on international markets, suppliers and networks from their inception and on companies that are establishing new, agile business models. This has resulted in two streams of research: The Born Global and International New...... Ventures research and research with a focus on the Lean Start-up company. It is our intention in this paper to give a short presentation of the two research streams and show how they can be merged into one with a focus on newly established technology oriented firms that are lean and global from...

Textural characterization and chemistry of activated coal obtained starting from stone of African palm at different conditions of temperature and carbonization time

International Nuclear Information System (INIS)

Diaz, Claudia Marcela; Briceno, Nelson; Baquero, Maria Cristina; Giraldo, Liliana; Moreno, Juan Carlos

2002-01-01

Activated carbons are obtained starting from stone of African palm, by means of chemical activation with k 2 CO 3 and thermal activation with CO 2 . The initial material undergoes different conditions of carbonization temperature 600, 750 and 900 Celsius degrades and different times of carbonization 1.0; 1.5; 2.0 and 2.5 hours, with the objective of observing how these conditions affect the porosity of the material. It is observed a low development of the porosity in the carbons carbonized to 900 Celsius degrade and activated chemically. The acidity and basicity are determined for each one of the activated carbons obtained for titration with solutions 0.05 m of sodium hydroxide and of hydrochloric acid respectively. The samples activated chemically present bigger contents of acid groups, for the experimental conditions of work? Than the samples obtained by thermal activation for the activated carbons thermally activated, the values for acid and basic groups are low-between 0,20 and 0,72 meq g-l

Moral og hjerneskade

DEFF Research Database (Denmark)

Ryberg, Jesper

2015-01-01

Neurovidenskabens grand old man Antonio Damasio har undersøgt, hvordan ellers normalt fungerende mennesker med en skade i den nedre del af pandelappen vurderer andres adfærd. Resultatet var højst bemærkelsesværdigt....

The LHC Computing Grid in the starting blocks

CERN Multimedia

Danielle Amy Venton

2010-01-01

As the Large Hadron Collider ramps up operations and breaks world records, it is an exciting time for everyone at CERN. To get the computing perspective, the Bulletin this week caught up with Ian Bird, leader of the Worldwide LHC Computing Grid (WLCG). He is confident that everything is ready for the first data.   The metallic globe illustrating the Worldwide LHC Computing GRID (WLCG) in the CERN Computing Centre. The Worldwide LHC Computing Grid (WLCG) collaboration has been in place since 2001 and for the past several years it has continually run the workloads for the experiments as part of their preparations for LHC data taking. So far, the numerous and massive simulations of the full chain of reconstruction and analysis software could only be carried out using Monte Carlo simulated data. Now, for the first time, the system is starting to work with real data and with many simultaneous users accessing them from all around the world. “During the 2009 large-scale computing challenge (...

Healthy Start: a comprehensive health education program for preschool children.

Science.gov (United States)

Williams, C L; Squillace, M M; Bollella, M C; Brotanek, J; Campanaro, L; D'Agostino, C; Pfau, J; Sprance, L; Strobino, B A; Spark, A; Boccio, L

1998-01-01

Healthy Start is a 3-year demonstration and education research project designed to evaluate the effectiveness of a multidimensional cardiovascular (CV) risk reduction intervention in preschool centers over a 3-year period of time. Two primary interventions are employed. The first is the preschool food service intervention program designed to reduce the total fat in preschool meals and snacks to less than 30% of calories and reduce the saturated fat to less than 10% of calories. The second major intervention is a comprehensive preschool health education curriculum, focused heavily on nutrition. Effectiveness of the intervention will be determined through evaluation of changes in dietary intake of preschool children at school meals and snacks, especially with respect to intake of total and saturated fat. Evaluation of the education component will include assessment of program implementation by teachers, assessment of changes in nutrition knowledge by preschool children, and assessment of changes in home meals that children consume (total and saturated fat content). Blood cholesterol will be evaluated semiannually to evaluate changes that may be due to modification of dietary intake. Growth and body fatness will also be assessed. While substantial efforts have targeted CV risk reduction and health education for elementary school children, similar efforts aimed at preschool children have been lacking. The rationale for beginning CV risk reduction programs for preschool children is based upon the premise that risk factors for heart disease are prevalent by 3 years of age and tend to track over time, most commonly hypercholesterolemia and obesity, both related to nutrition. Since the behavioral antecedents for nutritional risk factors begin to be established very early in life, it is important to develop and evaluate new educational initiatives such as Healthy Start, aimed at the primary prevention of cardiovascular risk factors in preschool children. The purpose of this

Start-up emissions from residential down-draught wood log boilers

Energy Technology Data Exchange (ETDEWEB)

Pettersson, E. (Luleaa Univ. of Technology (Sweden). Energy Technology Centre in Piteaa), Email: esbjorn.pettersson@ltu.se

2009-07-01

Start-up emissions can be substantial and even dominating in real use. There are few published investigations regarding the relative importance of different parameters on the start-up emissions. It has though recently been stated that for down-draught boilers, best results are achieved if the wood charge is ignited fairly close to the secondary chamber. The objective of the experimental work was to evaluate the effect of different fuel and design parameters on the start-up emissions, using experimental design which enables a direct comparison between different parameters, using three levels of preheating of secondary air, electric preheating of primary air, different moisture and size of the start wood as well as different amounts of birch bark, which was used to spread the fire during the start. The boiler did not use a bypass damper and the full fuel charge was added before igniting the start wood through an ignition door situated slightly above the grate. The only significant results for the four parameters were that smaller and drier start wood gave lower start-up emissions. Extra amount of birch bark gave the same result. The most important parameters are the fuel parameters, which mean that the result is generally applicable. (orig.)

Start-up of Rapsodie

International Nuclear Information System (INIS)

Pontier, R.

1967-01-01

After giving a general description of Rapsodie this report presents the conditions in which the start-up occurred and in which the tests were carried out. A chronological account is given of the operations and of the main events which occurred. The modifications made to the reactor during this period are described and a synthesis of the results obtained is presented. (author) [fr

The renaissance starts here

International Nuclear Information System (INIS)

Nedderman, John.

1997-01-01

The Asian Pacific Basin region has the highest rate of growth of anywhere in the world and its need for electricity is staggering. This is leading, noted a senior Korean official speaking at the 10th Pacific Basin Nuclear Conference, to a ''renaissance of nuclear power'' in Asia. Judging by the optimism in evidence at the conference, perhaps it has already started. (Author)

Vortex Formation and Acceleration of a Fish-Inspired Robot Performing Starts from Rest

Science.gov (United States)

Devoria, Adam; Bapst, Jonathan; Ringuette, Matthew

2009-11-01

We investigate the unsteady flow of a fish-inspired robot executing starts from rest, with the objective of understanding the connection among the kinematics, vortex formation, and acceleration performance. Several fish perform ``fast starts,'' where the body bends into a ``C'' or ``S'' shape while turning (phase I), followed by a straightening of the body and caudal fin and a linear acceleration (phase II). The resulting highly 3-D, unsteady vortex formation and its relationship to the acceleration are not well understood. The self-propelled robotic model contains motor-driven joints with programmable motion to emulate phase II of a simplified C-start. The experiments are conducted in a water tank, and the model is constrained to 1 direction along rails. The velocity is measured using digital particle image velocimetry (DPIV) in multiple planes. Vortex boundaries are identified using the finite-time Lyapunov exponent, then the unsteady vortex circulation is computed. The thrust is estimated from the identified vortices, and correlated with the circulation and model acceleration for different kinematics.

Monitoring Start of Season in Alaska

Science.gov (United States)

Robin, J.; Dubayah, R.; Sparrow, E.; Levine, E.

2006-12-01

In biomes that have distinct winter seasons, start of spring phenological events, specifically timing of budburst and green-up of leaves, coincides with transpiration. Seasons leave annual signatures that reflect the dynamic nature of the hydrologic cycle and link the different spheres of the Earth system. This paper evaluates whether continuity between AVHRR and MODIS normalized difference vegetation index (NDVI) is achievable for monitoring land surface phenology, specifically start of season (SOS), in Alaska. Additionally, two thresholds, one based on NDVI and the other on accumulated growing degree-days (GDD), are compared to determine which most accurately predicts SOS for Fairbanks. Ratio of maximum greenness at SOS was computed from biweekly AVHRR and MODIS composites for 2001 through 2004 for Anchorage and Fairbanks regions. SOS dates were determined from annual green-up observations made by GLOBE students. Results showed that different processing as well as spectral characteristics of each sensor restrict continuity between the two datasets. MODIS values were consistently higher and had less inter-annual variability during the height of the growing season than corresponding AVHRR values. Furthermore, a threshold of 131-175 accumulated GDD was a better predictor of SOS for Fairbanks than a NDVI threshold applied to AVHRR and MODIS datasets. The NDVI threshold was developed from biweekly AVHRR composites from 1982 through 2004 and corresponding annual green-up observations at University of Alaska-Fairbanks (UAF). The GDD threshold was developed from 20+ years of historic daily mean air temperature data and the same green-up observations. SOS dates computed with the GDD threshold most closely resembled actual green-up dates observed by GLOBE students and UAF researchers. Overall, biweekly composites and effects of clouds, snow, and conifers limit the ability of NDVI to monitor phenological changes in Alaska.

A dense grid of narrow bandpass steep edge filters for the JST/T250 telescope: summary of results

Science.gov (United States)

Brauneck, U.; Sprengard, R.; Bourquin, S.; Marín-Franch, A.

2017-09-01

On the Javalambre mountain in Spain, the Centro de Estudios de Fisica del Cosmos de Aragon (CEFCA) has setup a new wide field telescope, the JST/T250: a 2.55 m telescope with a plate scale of 22.67"/mm and a 3° diameter field of view. To conduct a photometric sky survey, a large format mosaic camera made of 14 individual CCDs is used in combination with filter trays containing 14 filters each of theses 101.7 x 96.5 mm in size. For this instrument, SCHOTT manufactured 56 specially designed steep edged bandpass interference filters which were recently completed. The filter set consists of bandpass filters in the range between 348,5 nm and 910 nm and a longpass filter at 915 nm. Most of the filters have FWHM of 14.5 nm and a blocking between 250 and 1050 nm with optical density of OD5. Absorptive color glass substrates in combination with interference filters were used to minimize residual reflection in order to avoid ghost images. Inspite of containing absorptive elements, the filters show the maximum possible transmission. This was achieved by using magnetron sputtering for the filter coating process. The most important requirement for the continuous photometric survey is the tight tolerancing of the central wavelengths and FWHM of the filters. This insures each bandpass having a defined overlap with its neighbors. In addition, the blocking of the filters is better than OD5 in the range 250-1050 nm. A high image quality required a low transmitted wavefront error (

'Stutter timing' for charge decay time measurement

Energy Technology Data Exchange (ETDEWEB)

Chubb, John [Infostatic, 2 Monica Drive, Pittville, Cheltenham, GL50 4NQ (United Kingdom); Harbour, John [Hawthorne Technical Design, The Hawthornes, Startley, Chippenham, SN15 5HG,UK (United Kingdom); Pavey, Ian, E-mail: jchubb@infostatic.co.uk [Chilworth Technology Ltd, Beta House, Southampton Science Park, Southampton, SO16 7NS (United Kingdom)

2011-06-23

The paper describes the approach of 'stutter timing' that has been developed to improve the accuracy of measuring charge decay times in the presence of noise in compact and portable charge decay test instrumentation. The approach involves starting and stopping the timing clock as the noisy signal rises above and falls below the target threshold voltage level.

Time since start of first-line therapy as a predictive clinical marker for nintedanib in patients with previously treated non-small cell lung cancer

DEFF Research Database (Denmark)

Gaschler-Markefski, Birgit; Sikken, Patricia; Heymach, John V

2017-01-01

INTRODUCTION: No predictive clinical or genetic markers have been identified or validated for antiangiogenic agents in lung cancer. We aimed to identify a predictive clinical marker of benefit for nintedanib, an angiokinase inhibitor, using data from two large second-line non-small cell lung cancer...... Phase III trials (LUME-Lung 1 ([LL1] and LUME-Lung 2). METHODS: Predictive marker identification was conducted in a multi-step process using data from both trials; a hypothesis was generated, confirmed and validated. Statistical analyses included a stepwise selection approach, a recursive partitioning...... method and the evaluation of HRs, including treatment-by-covariate interactions. The marker was finally validated using a prospectively defined hierarchical testing procedure and treatment-by-covariate interaction for overall survival (OS) based on LL1. RESULTS: Time since start of first-line therapy...

Control device for start-up of reactor depressurization system

International Nuclear Information System (INIS)

Suzuki, Hiroshi; Saito, Minoru; Oda, Shingo; Miura, Satoshi; Hashimoto, Koji; Tate, Hitoshi; Fujii, Kazunobu

1998-01-01

The present invention concerns are emergency reactor core cooling system (ECCS) of a BWR type reactor and provides a control device for start-up of an automatic depressurization system. Namely, the device has an object of preventing erroneous opening of a main steam escape safety value when testing a start-up signal circuit of an automatic depressurization system for testing the automatic depressurization system. A start-up signal circuit receives both signals of a reactor container pressure high signal and a reactor pressure vessel water level low signal and outputs an automatic start-up signal for compulsorily opening a main steam escape safety valve automatically. A test switch having a self-holding circuit is disposed to a central control chamber. A test signal circuit is disposed for preventing transfer of an erroneous start-up signal to the main steam escape safety valve due to a simulation signal during output test signals by the test switch. (I.S.)

Start-up and operation of Laguna Verde-2

International Nuclear Information System (INIS)

Torres Ramirez, J.F.

1996-01-01

The 665 MWe Laguna Verde-2 nuclear generating unit was accepted into commercial operation on April 10, 1995. The boiling water reactor plant by General Electric (GE) was first synchronized with the grid on November 11, 1994. Laguna Verde-2 is identical with Laguna Verde-1 on the same site. That unit had gone critical for the first time in November 1988 and had first been synchronized with the power grid on April 13, 1989. Commercial operation of Laguna Verde-1 had been started on July 29, 1990. Mexico's only nuclear power plant had been built 70 km north of Veracruz on the east coast and had been scheduled to start operation in 1976. As the Mexican nuclear power program was reduced, the scheduled commissioning dates suffered more and more delays. In the full of 1987, the investigation by the Operational Safety Review Team (Osart) of the International Atomic Energy Agency (IAEA) had indicated that the safety requirements of installations and equpiment were met, and that the whole plant was well prepared for fueling. In mid-1988, the Mexican Government had issued the permit to fuel the Laguna Verde-1 reactor. The contract to build the two units had been awarded in 1972/73. No other nuclear power plants are currently under construction or in the planning phase in Mexico. (orig.) [de

DBSSP - A computer program for simulation of controlled circulation boiler and natural circulation boiler start up behavior

International Nuclear Information System (INIS)

Li Bin; Chen Tingkuan; Yang Dong

2005-01-01

In this paper, a computer program, Drum Boiler Start-up Simulation Program (DBSSP), is developed for simulating the start up behavior of controlled circulation and natural circulation boilers. The mathematical model developed here is based on the first principles of mass, energy and momentum conservations. In the boiler model, heat transfer in the waterwall, the superheater, the reheater and the economizer is simulated by the distributing parameter method, while heat transfer in the drum and the downcomer is simulated by lumped parameter analysis. The program can provide detailed flow and thermodynamic characteristics of the boiler components. The development of this program is based only on design data, so it can be used for any subcritical, controlled or natural circulation boiler. The simulation results were compared with experimental measurements, and good agreements between them were found. This program is expected to be useful for predicting the characteristics and the performance of controlled circulation and natural circulation boilers during the start up process. It also can be used to optimize a start up system for minimum start up time

When to Start Antiretroviral Therapy

Science.gov (United States)

... illnesses and coinfections Recent HIV infection Pregnancy All pregnant women with HIV should take HIV medicines to prevent mother-to- ... protect the health of the pregnant woman. All pregnant women with HIV should start taking HIV medicines as soon as ...

Associations among Head Start Fathers' Involvement with Their Preschoolers and Child Language Skills

Science.gov (United States)

Fagan, Jay; Iglesias, Aquiles; Kaufman, Rebecca

2016-01-01

This study examined the associations among child language competence during father-child play interactions, fathers' time spent volunteering in their preschool-age child's Head Start classroom over the course of one school year, amount of father play and reading to the child at home, and fathers' positive control during play. The sample of 68…

Is the decline of renal function different before and after the start of dialysis?

NARCIS (Netherlands)

de Jager, Dinanda J.; Halbesma, Nynke; Krediet, Raymond T.; Boeschoten, Elisabeth W.; le Cessie, Saskia; Dekker, Friedo W.; Grootendorst, Diana C.; Apperloo, A. J.; Bijlsma, J. A.; Boekhout, M.; Boer, W. H.; van der Boog, P. J. M.; Büller, H. R.; van Buren, M.; de Charro, F. Th; Doorenbos, C. J.; van den Dorpel, M. A.; van Es, A.; Fagel, W. J.; Feith, G. W.; de Fijter, C. W. H.; Frenken, L. A. M.; van Geelen, J. A. C. A.; Gerlag, P. G. G.; Grave, W.; Gorgels, J. P. M. C.; Huisman, R. M.; Jager, K. J.; Jie, K.; Koning-Mulder, W. A. H.; Koolen, M. I.; Hovinga, T. K. Kremer; Lavrijssen, A. T. J.; Luik, A. J.; van der Meulen, J.; Parlevliet, K. J.; Raasveld, M. H. M.; van der Sande, F. M.; Schonck, M. J. M.; Schuurmans, M. M. J.; Siegert, C. E. H.; Stegeman, C. A.; Stevens, P.; Thijssen, J. G. P.; Valentijn, R. M.; Vastenburg, G. H.; Verburgh, C. A.; Vincent, H. H.; Vos, P. F.

2013-01-01

The presence of glomerular filtration in dialysis patients is associated with improved survival and quality of life. This study explores the time course of the glomerular filtration rate (GFR) between 1 year before and 1 year after the start of haemodialysis (HD) and peritoneal dialysis (PD). This

Start up testing for the secure automated fabrication line

International Nuclear Information System (INIS)

Gerber, E.W.; Benson, E.M.; Dahl, R.E.

1987-01-01

The secure automated fabrication (SAF) line is a remotely operated, liquid metal reactor fuel fabrication process being built by Westinghouse Hanford Company for the Department of Energy. All process and control equipment is installed and start up testing has been initiated. Start up testing is comprised of five phases, each incorporating higher degrees of equipment integration, automation, and remote control. Testing methodology for SAF line start up is described in this report

Ecological dynamics of continuous and categorical decision-making: the regatta start in sailing.

Science.gov (United States)

Araújo, Duarte; Davids, Keith; Diniz, Ana; Rocha, Luis; Santos, João Coelho; Dias, Gonçalo; Fernandes, Orlando

2015-01-01

Ecological dynamics of decision-making in the sport of sailing exemplifies emergent, conditionally coupled, co-adaptive behaviours. In this study, observation of the coupling dynamics of paired boats during competitive sailing showed that decision-making can be modelled as a self-sustained, co-adapting system of informationally coupled oscillators (boats). Bytracing the spatial-temporal displacements of the boats, time series analyses (autocorrelations, periodograms and running correlations) revealed that trajectories of match racing boats are coupled more than 88% of the time during a pre-start race, via continuous, competing co-adaptions between boats. Results showed that both the continuously selected trajectories of the sailors (12 years of age) and their categorical starting point locations were examples of emergent decisions. In this dynamical conception of decision-making behaviours, strategic positioning (categorical) and continuous displacement of a boat over the course in match-race sailing emerged as a function of interacting task, personal and environmental constraints. Results suggest how key interacting constraints could be manipulated in practice to enhance sailors' perceptual attunement to them in competition.

Calculation method for control rod dropping time in reactor

International Nuclear Information System (INIS)

Nogami, Takeki; Kato, Yoshifumi; Ishino, Jun-ichi; Doi, Isamu.

1996-01-01

If a control rod starts dropping, the dropping speed is rapidly increased, then settled substantially constant, rapidly decreased when it reaches a dash pot. A second detection signal generated by removing an AC component from a first detection signal is differentiated twice. The time when the maximum value among the twice differentiated values is generated is determined as a time when the control rods starts dropping. The time when minimum value among the twice differentiated values is generated is determined as a time when the control rod reaches the dash pot of the reactor. The measuring time within a range from the time when the control rod starts dropping to the time when the control rod reaches the dash pot of the reactor is determined. As a result, processing for the calculation of the dropping start time and dash pot reaching time of the control rod can be automatized. Further, it is suffice to conduct differentiation twice till the reaching time, which can facilitate the processing thereby enabling to determine a reliable time range. (N.H.)

Getting started with Hazelcast

CERN Document Server

Johns, Mat

2013-01-01

Written as a step-by-step guide, Getting Started with Hazelcast will teach you all you need to know to make your application data scalable.This book is a great introduction for Java developers, software architects, or developers looking to enable scalable and agile data within their applications. You should have programming knowledge of Java and a general familiarity with concepts like data caching and clustering.

START: the creation of a spherical tokamak

International Nuclear Information System (INIS)

Sykes, Alan

1992-01-01

The START (Small Tight Aspect Ratio Tokamak) plasma fusion experiment is now operational at AEA Fusion's Culham Laboratory. It is the world's first experiment to explore an extreme limit of the tokamak - the Spherical Tokamak - which theoretical studies predict may have substantial advantages in the search for economic fusion power. The Head of the START project, describes the concept, some of the initial experimental results and the possibility of developing a spherical tokamak power reactor. (author)

Factors contributing to delay in diagnosis and start of treatment of leprosy

DEFF Research Database (Denmark)

Nicholls, P.G.; Chhina, N; Aaen, Karen Bro

2005-01-01

The objective of our research was to identify factors contributing to delay in diagnosis and start of treatment in leprosy, focussing on patients' narratives of help-seeking behaviour. Our research took place in Purulia, West Bengal, India and in Nilphamari, northern Bangladesh. Between January...... and August 2000, we conducted semi-structured interviews with 104 patients that explored each individual's narrative of help-seeking behaviour and the context of beliefs and attitudes towards leprosy. Subsequently we surveyed 356 patients currently receiving treatment for leprosy and recorded specific...... aspects of each help-seeking action and their reports of local beliefs and attitudes towards leprosy. Delay was estimated from time of first symptoms through to start of effective treatment (mean 18 months, median 9 months in Purulia and mean 20 months, median 12 months in Nilphamari). The number of help...

A novel induction motor starting method using superconduction

International Nuclear Information System (INIS)

Silva, F.B.B.; Orlando, M.T.D.; Fardin, J.F.; Simonetti, D.S.; Baldan, C.A.

2014-01-01

Highlights: • Alternative method for starting up induction motor. • Based on using a high-temperature superconductor. • A prototype of the limiter was constructed with a 2G-YBCO tape. • Prototype was tested with a 55-kW industrial induction motor in a 440-V/60-Hz. • Offers reduced current waveform distortion compared to the soft starter method. - Abstract: In this paper, an alternative method for starting up induction motors is proposed, taking into account experimental measurements. The new starting current limitation method is based on using a high-temperature superconductor. A prototype of the superconducting starting current limiter was constructed with a commercially available second-generation high-temperature superconductor YBCO tape, and this was tested with a 55-kW industrial induction motor in a 440-V/60-Hz three-phase power grid. Performance evaluations of the superconducting limiter method (applied to startup of the induction motor) were performed and were compared with a direct-on-line starter and an electronic soft starter. In addition, a computational model was developed and used for electromagnetic torque analysis of the system. As significant characteristics, our method offers the ability to limit the starting current of the induction motor with greater electromagnetic torque, reduced current waveform distortion and therefore lower harmonic pollution during startup when compared to the soft starter method

A novel induction motor starting method using superconduction

Energy Technology Data Exchange (ETDEWEB)

Silva, F.B.B., E-mail: flaviobarcelos@ifes.edu.br [Ifes – Federal Institute of Espírito Santo, Dept. of Industrial Automation, Serra, ES 29173087 (Brazil); UFES – Federal University of Espírito Santo, Dept. of Electrical Engineering, Vitória, ES (Brazil); Orlando, M.T.D. [UFES – Federal University of Espírito Santo, Dept. of Physics, Vitória, ES (Brazil); Fardin, J.F.; Simonetti, D.S. [UFES – Federal University of Espírito Santo, Dept. of Electrical Engineering, Vitória, ES (Brazil); Baldan, C.A. [EEL/USP – Engineering School from Lorena/University of São Paulo, SP (Brazil)

2014-12-15

Highlights: • Alternative method for starting up induction motor. • Based on using a high-temperature superconductor. • A prototype of the limiter was constructed with a 2G-YBCO tape. • Prototype was tested with a 55-kW industrial induction motor in a 440-V/60-Hz. • Offers reduced current waveform distortion compared to the soft starter method. - Abstract: In this paper, an alternative method for starting up induction motors is proposed, taking into account experimental measurements. The new starting current limitation method is based on using a high-temperature superconductor. A prototype of the superconducting starting current limiter was constructed with a commercially available second-generation high-temperature superconductor YBCO tape, and this was tested with a 55-kW industrial induction motor in a 440-V/60-Hz three-phase power grid. Performance evaluations of the superconducting limiter method (applied to startup of the induction motor) were performed and were compared with a direct-on-line starter and an electronic soft starter. In addition, a computational model was developed and used for electromagnetic torque analysis of the system. As significant characteristics, our method offers the ability to limit the starting current of the induction motor with greater electromagnetic torque, reduced current waveform distortion and therefore lower harmonic pollution during startup when compared to the soft starter method.

Relations Between Lower Body Isometric Muscle Force Characteristics and Start Performance in Elite Male Sprint Swimmers

Directory of Open Access Journals (Sweden)

Igor Beretić

2013-12-01

Full Text Available The aim of the present study was twofold. The first aim was to examine the influence of absolute and relative lower body muscle force on kinematic component which determine the start performance. The second aim was to create multiregressional model which could use as a tool for swimming coaches with the purpose to start performance control and improvement. Twenty seven high-level trained male competitive swimmers all members of the Serbian National Youth and Senior Swimming Team (Age = 21.1 ± 4.3 yrs., Height = 1. 89 ± 0.10 m, Weight = 81.6 ± 8.4 kg, 50m freestyle - long course = 24.36 ± 0.86 s performed two trials of standing leg extensors isometric muscle force testing and three swimming start trials corresponding to 10m distance. The average start time significantly correlated with variables of leg extensors maximum voluntary force (Fmax, r = -0.559, p = 0.002, leg extensors relative muscle voluntary force (Frel, r = -0.727, p < 0.001, leg extensors specific rate of force development (RFD50%, r = -0.338, p = 0.047 and leg extensors relative value of specific rate of force development (RFD50%rel, r = -0.402, p = 0.040. Regression equation for t10m prediction was defined by following variables: maximum voluntary isometric force of leg extensors muscles at absolute and relative level (Fmax and Frel, as well as a specific rate of force development of the same muscle groups (RFD50% and RFD50%rel at absolute and relative level too with 74.4% of explained variance. Contractile abilities indicators of the leg extensors muscles included consideration: Fmax, RFD50%, Frel and RFD50%rel showed significant correlation with swimming start times on 10m. Additionally, the results suggest that swimmers, who possess greater isometric maximum force and specific rate of force development at absolute and relative levels, tend to be able to swim faster on initial 10m swim start perforamnce.

Early Start DENVER Model: A Meta - analysis

Directory of Open Access Journals (Sweden)

Jane P. Canoy

2015-11-01

Full Text Available Each child with Autism Spectrum Disorder has different symptoms, skills and types of impairment or disorder with other children. This is why the word “spectrum” is included in this disorder. Eapen, Crncec, and Walter, 2013 claimed that there was an emerging evidence that early interventions gives the greatest capacity of child’s development during their first years of life as “brain plasticity” are high during this period. With this, the only intervention program model for children as young as 18 months that has been validated in a randomized clinical trial is “Early Start Denver Model” (ESDM. This study aimed to determine the effectiveness of the outcome of “Early Start Denver Model” (ESDM towards young children with Autism Spectrum Disorders. This study made use of meta-analysis method. In this study, the researcher utilized studies related to “Early Start Denver Model (ESDM” which is published in a refereed journal which are all available online. There were five studies included which totals 149 children exposed to ESDM. To examine the “pooled effects” of ESDM in a variety of outcomes, a meta-analytic procedure was performed after the extraction of data of the concrete outcomes. Comprehensive Meta Analysis Version 3.3.070 was used to analyze the data.  The effectiveness of the outcome of “Early Start Denver Model” towards young children with Autism Spectrum Disorders (ASD highly depends on the intensity of intervention and the younger child age. This study would provide the basis in effectively implementing an early intervention to children with autism such as the “Early Start Denver Model” (ESDM that would show great outcome effects to those children that has “Autism Spectrum Disorder”.

LightCDD: Application of a Capability-Driven Development Method for Start-ups Development

Directory of Open Access Journals (Sweden)

Hasan Koç

2017-04-01

Full Text Available Novice innovators and entrepreneurs face the risk of designing naive business models. In fact, lack of viability in business models is perceived to be a major threat for the start-up success. Both the literature and the responses we gathered from experts in incubation present evidences of this problem. The LightCDD method helps entrepreneurs in the analysis, design and specification of start-ups that are context aware and adaptive to contextual changes and evolution. In this article we describe the LightCDD method, a context-aware enterprise modeling method that is tailored for business model generation. The LightCDD applies a lightweight Capability‑Driven Development (CDD methodology. It reduces the set of modeling constructs and guidelines to facilitate its adoption by entrepreneurs, yet keeping it expressive enough for their purposes and, at the same time, compatible with the CDD methodology. We provide a booklet with the LightCDD method for start-ups development. The feasibility of the LightCDD method is validated by means of its application to one start-up development case. From a practitioner viewpoint (entrepreneurs and experts in incubation, it is important to provide integrative modeling perspectives to specify business ideas, but it is vital to keep it light. The LightCDD is giving a step forward in this direction. From a researcher point of view, the LightCDD booklet facilitates the application of LightCDD to different start-up development cases. The feasibility validation has produced important feedback for further empirical validation exercises in which is necessary to study the scalability and sensitivity of LightCDD.

Head Start, 4 years After Completing the Program

Science.gov (United States)

Kim, Young-Joo

2013-01-01

This paper studies the effect of the Head Start program on children's achievements in reading and math tests during their first 4 years of schooling after completing the program. Using nationally representative data from the Early Childhood Longitudinal Study, I found large measurement error in the parental reports of Head Start attendance, which…

Effect of the Modification of the Start-Up Sequence on the Thermal Stresses for a Microgas Turbine

Directory of Open Access Journals (Sweden)

Oscar Tenango-Pirin

2016-01-01

Full Text Available Microgas turbines (MGT are an alternative for small-scale energy production; however, their small size becomes a drawback since it enhances the heat transfer among their components. Moreover, heat transfer drives to temperature gradients which become higher during transient cycles like start-up. The influence of different start-up curves on temperature and thermal stresses of a microgas turbine was investigated. Stationary and rotational blades of the turbine were numerically simulated using CFD and FEM commercial codes. Conjugated heat transfer cases were solved for obtaining heat transfer from fluid toward the blades. Changes of temperature gradients within the blades during the start-ups were calculated under transient state with boundary conditions according to each curve to assess accurate thermal stresses calculations. Results showed that the modification of the start-up curves had an impact on the thermal stresses levels and on the time when highest stresses appeared on each component. Furthermore, zones highly stressed were located near the constraints of blades where thermal strains are restricted. It was also found that the curve that had a warming period at the beginning of the start-up allowed reducing the peaks of stresses making it more feasible and safer for the turbine start-up operation.

An analysis of the sliding pressure start-up of SCWR

International Nuclear Information System (INIS)

Wang, F.; Yang, J.; Li, H.; Zhang, Y.; Zhang, J.; Shan, J.; Gou, J.; Zhang, B.; Chen, C.

2012-01-01

In this paper, the preliminary sliding pressure start-up system and scheme of supercritical water-cooled reactor in CGNPC (CGN-SCWR) were proposed. Thermal-hydraulic behavior in start-up procedures was analyzed in detail by employing advanced reactor subchannel analysis software ATHAS. The maximum cladding temperature (MCT for short) and core power of fuel assembly during the whole start-up process were investigated comparatively. The results show that the recommended start-up scheme meets the design requirements from the perspective of thermal-hydraulic. (authors)

Healthy Start vitamins—a missed opportunity: findings of a multimethod study

Science.gov (United States)

McFadden, Alison; Green, Josephine M; McLeish, Jenny; McCormick, Felicia; Williams, Victoria; Renfrew, Mary J

2015-01-01

Objective To evaluate and provide a real-life view of the operation of the Healthy Start vitamins scheme. Setting The study took place in primary care and community settings that served rural, urban and ethnically diverse populations, in two sentinel sites: London, and Yorkshire and the Humber. An online consultation and stakeholder workshops elicited views from across England. Participants 669 health and social care practitioners including health visitors, midwives, public health practitioners, general practitioners, paediatricians and support staff participated in focus group discussions (n=49) and an online consultation (n=620). 56 participants representing health and social care practitioners, policymakers, service commissioners, and voluntary and independent sectors took part in stakeholder workshops. Methods Three-phase multimethod study comprising focus group discussions, an online consultation and stakeholder workshops. Qualitative data were analysed thematically and quantitative data from the online survey were analysed using descriptive statistics. Results Study participants were concerned about the low uptake of Healthy Start vitamin supplements and the consequences of this for health outcomes for women and young children. They experienced Healthy Start vitamin distribution as logistically complex, requiring the time, resources and creative thinking of a range of local and regional practitioners from senior strategists to administrative support workers. In the light of this, many participants argued that moving to universal provision of vitamin supplements would be more cost-effective than the current system. Conclusions There is consistency of views of health practitioners that the current targeted system of providing free vitamin supplements for low-income childbearing women and young children via the Healthy Start programme is not fulfilling its potential to address vitamin deficiencies. There is wide professional and voluntary sector support for

The process of the start-up of a PWR nuclear power plant in the USA

International Nuclear Information System (INIS)

Rana, B.S.

1977-01-01

The procedure is described of putting into full operation the William B. Mc Guire nuclear power plant with two PWR reactors with an output of 2x3,411 MWt (2x1,220 MWe) supplied to the Duke Power Co. lock, stock and barrel. The basic specifications are shown of units I and II and the organization of start-up activities is described. The time schedule of preoperational and start-up tests is shown and testing is reviewed preceding the first fuel charge. Also described are tests related to the first start-up of a unit comprising the period of the first fuel charge, the initial critical state, low-power tests and tests with power gradually increased. In tests of the individual systems and components of the unit, operating regulations are verified and, if required, renewed, or new regulations are introduced. (B.S.)

Effectiveness of Fresh Start: A Randomized Study of a School-Based Program to Retain a Negative Attitude Toward Substance Use in Secondary School Freshmen.

Science.gov (United States)

Onrust, Simone A; van der Heijden, Amy; Zschämisch, Anna L; Speetjens, Paula A M

2018-05-12

The transition to secondary school is linked to more positive attitudes toward substance use, which prelude the moment of first use. Fresh Start is a school-based prevention program for secondary school freshmen (12-13 years old) to retain negative attitudes. This study evaluates the effectiveness of Fresh Start on the attitudes toward smoking, alcohol use, and cannabis use, and on multiple secondary outcome measures. In addition, the effect of timing of the program within the schoolyear was examined. A cluster randomized trial was conducted. 48 classes, containing 1083 secondary school freshmen, were randomly allocated to the experimental or waiting list control condition. Experimental classes completed Fresh Start between October 2015 and January 2016 and waiting list control classes completed Fresh Start between March 2016 and May 2016. Measurements were scheduled at three points in time (September 2015, February 2016, and June 2016). Data were analyzed by means of multilevel analyses. Fresh Start had small but significant effects on the attitudes toward smoking, alcohol use and cannabis use. The majority of secondary outcome measures were not influenced by Fresh Start, although a small, adverse effect was found on the perceived social acceptance of cannabis use by friends. Timing of the intervention within the schoolyear did not influence its effectiveness. Conclusions/Importance: Fresh Start can help to delay the development of positive attitudes toward substance use in secondary school freshmen. Strengths and limitations, implications for practice and suggestions for future research are discussed.

Numerical model for verification of constitutive laws of blood vessel wall

Czech Academy of Sciences Publication Activity Database

Macková, H.; Chlup, Hynek; Žitný, R.

-, 2/1 (2007), s. 66-66 ISSN 1880-9863 Institutional research plan: CEZ:AV0Z20760514 Keywords : constitutive law * numerical model * pulse wave velocity Subject RIV: BK - Fluid Dynamics http://www.jstage.jst.go.jp/browse/jbse/2/Suppl.1/_contents

Random-start ovarian stimulation in women desiring elective cryopreservation of oocytes.

Science.gov (United States)

Pereira, Nigel; Voskuilen-Gonzalez, Anna; Hancock, Kolbe; Lekovich, Jovana P; Schattman, Glenn L; Rosenwaks, Zev

2017-10-01

The current study investigates the utility of random-start ovarian stimulation in women desiring elective oocyte cryopreservation. Women in the study cohort underwent random-start ovarian stimulation, and were subdivided based on the phase of the menstrual cycle that ovarian stimulation began, i.e. early follicular, late follicular or luteal phase. Women undergoing conventional cycle day (CD) 2/3 ovarian stimulation start were controls. A total of 1302 women were included - 859 (66.0%) conventional CD 2/3, 342 (26.3%) early follicular, 42 (3.2%) late follicular and 59 (4.5%) luteal ovarian stimulation starts. There was no difference in the demographics or baseline ovarian stimulation characteristics. The duration of ovarian stimulation (11 versus 9 days; P start group. The number of total and MII oocytes in the control and random-start groups was similar. A non-significant trend towards increased cycle cancellation was noted in the late follicular start group (7.1%). Study findings indicate the number of total and MII oocytes derived from random-start protocols initiated during any phase of the menstrual cycle is similar to conventional CD 2/3 ovarian stimulation start protocols in women desiring elective oocyte cryopreservation. Copyright © 2017 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

North Carolina's Smart Start Initiative: 1994-95 Annual Evaluation Report.

Science.gov (United States)

North Carolina Univ., Chapel Hill. Frank Porter Graham Center.

Smart Start is North Carolina's partnership between state government and local leaders, service providers, and families to better serve children under six years and their families to ensure that all children start school healthy and prepared to succeed. Local Smart Start partnerships spent much of their first year formulating long-term plans,…

Head Start Impact Study. Final Report. Executive Summary

Science.gov (United States)

Puma, Michael; Bell, Stephen; Cook, Ronna; Heid, Camilla; Shapiro, Gary; Broene, Pam; Jenkins, Frank; Fletcher, Philip; Quinn, Liz; Friedman, Janet; Ciarico, Janet; Rohacek, Monica; Adams, Gina; Spier, Elizabeth

2010-01-01

This report summarizes the findings from a study on the impacts of Head Start on children and families during the children's preschool, kindergarten, and 1st grade years. Its study goals were to: (1) Determine the impact of Head Start on children's school readiness, and on parental practices that support children's development; and to (2)…

Training Future Entrepreneurs Using European Funds. A Descriptive Research on Start-Up Romania Programs

Directory of Open Access Journals (Sweden)

Cristina Nicolau

2016-01-01

Full Text Available This paper focuses on the mutual relationship among the concepts of entrepreneurship, trainingpersonnel and business start-up and development. From our point of view, Romania shallencourage as much as possible entrepreneurship so as to create SMEs, the most flexible andnumerous in number in the Romanian total number of companies. Hence, the main objective of thispaper is to highlight the importance of accessing European funds in increasing the number ofRomanians properly trained so as to become successful entrepreneurs and to manage successfulbusinesses. At the same time, another main objective is to present the need of entrepreneurshiptraining and support in business start-up and development by using the descriptive method ofresearch.

Computer network time synchronization the network time protocol

CERN Document Server

Mills, David L

2006-01-01

What started with the sundial has, thus far, been refined to a level of precision based on atomic resonance: Time. Our obsession with time is evident in this continued scaling down to nanosecond resolution and beyond. But this obsession is not without warrant. Precision and time synchronization are critical in many applications, such as air traffic control and stock trading, and pose complex and important challenges in modern information networks.Penned by David L. Mills, the original developer of the Network Time Protocol (NTP), Computer Network Time Synchronization: The Network Time Protocol

Nanotechnology R and D Policy of Japan and Nanotechnology Support Project

International Nuclear Information System (INIS)

Kishi, Teruo

2004-01-01

In the 2nd Science and Technology Basic Plan (2001-2005), the area of nanotechnology and materials is designated one of the four prioritized areas in funding. Following this plan, Ministry of Education, Culture, Sports, Science and Technology (MEXT) and Ministry of Economy, Trade and Industries (METI), the main funding ministries, and their organizations, Japan Society for the Promotion of Science (JSPS), Japan Science and Technology Agency (JST), National Institute for Materials Science (NIMS), RIKEN, New Energy and Industrial Technology Organization (NEDO), and National Institute of Advanced Industrial Science and Technology (AIST) promotes their research programs. Besides, in order to promote interdisciplinary, interorganizational, and international collaboration of researchers, Nanotechnology Support Project (NSP) was started by MEXT in 2002. The project has two missions: informational support and common use facility support. Nanotechnology Researchers Network Center of Japan is responsible for informational support, and 14 universities and national research institutes are responsible for common use facility support

Supporting Optimal Child Development through Early Head Start and Head Start Programs: Reflections on Secondary Data Analyses of FACES and EHSREP

Science.gov (United States)

Chazan-Cohen, Rachel; Halle, Tamara G.; Barton, Lauren R.; Winsler, Adam

2012-01-01

We are delighted to reflect on the 10 papers highlighted in this important special issue of "Early Childhood Research Quarterly" devoted to recent secondary data analyses of the FACES and EHSREP datasets. First, we provide some background on Head Start research and give an overview of the large-scale Head Start and Early Head Start…

Exploratory Analysis of Time from HIV Diagnosis to ART Start, Factors and effect on survival: A longitudinal follow up study at seven teaching hospitals in Ethiopia.

Science.gov (United States)

Teklu, Alula M; Delele, Kesetebirhan; Abraha, Mulu; Belayhun, Bekele; Gudina, Esayas Kebede; Nega, Abiy

2017-02-01

The HIV care in Ethiopia has reached 79% coverage. The timeliness of the care provided at the different levels in the course of the disease starting from knowing HIV positive status to ART initiation is not well known. This study intends to explore the timing of the care seeking, the care provision and associated factors. This is a longitudinal follow-up study at seven university hospitals. Patients enrolled in HIV care from September 2005 to December 2013 and aged ≥14 years were studied. Different times in the cascade of HIV care were examined including the duration from date HIV diagnosed to enrollment in HIV care, duration from enrollment to eligibility for ART and time from eligibility to initiation of ART. Ordinal logistic regression was used to investigate their determinants while the effect of these periods on survival of patients was determined using cox-proportional hazards regression. 4159 clients were studied. Time to enrollment after HIV test decreased from 39 days in 2005 to 1 day after 2008. It took longer if baseline CD4 was higher, and eligibility for ART was assessed late. Young adults, lower baseline CD4, HIV diagnosisART initiation. Male gender, advanced disease stage and lower baseline CD4 were consistent risk factors for mortality. Time to enrollment and duration of ART eligibility assessment as well as ART initiation time after eligibility is improving. Further study is required to identify why mortality is slightly increasing after 2010.

The Role of Classroom Quality in Explaining Head Start Impacts

Science.gov (United States)

Connors, Maia C.; Friedman-Krauss, Allison H.; Morris, Pamela A.; Page, Lindsay C.; Feller, Avi

2014-01-01

This study seeks to answer the following question: Are impacts on Head Start classroom quality associated with impacts of Head Start on children's learning and development? This study employs a variety of descriptive and quasi-experimental methods to explore the role of classroom quality as a mediator or mechanism of Head Start impacts. This…

Enhancing Early Childhood Outcomes: Connecting Child Welfare and Head Start

Science.gov (United States)

McCrae, Julie S.; Brown, Samantha M.; Yang, Jessica; Groneman, Sheila

2016-01-01

Head Start is a preschool program for families with low incomes and nearly 85% of child welfare-involved families are low-income, yet little is known about Head Start and child welfare collaboration. This study uses data from 28 Head Start directors to describe collaboration facilitators and barriers, and collaborative mechanisms in place. The…

Spanish Instruction in Head Start and Dual Language Learners' Academic Achievement.

Science.gov (United States)

Miller, Elizabeth B

2017-09-01

Data from the Head Start Impact Study ( N = 1,141) and the Head Start Family and Child Experiences Survey, 2009 Cohort ( N = 825) were used to investigate whether Spanish instruction in Head Start differentially increased Spanish-speaking Dual Language Learners' (DLLs) academic achievement. Although hypothesized that Spanish instruction would be beneficial for DLLs' early literacy and math skills, results from residualized growth models showed there were no such positive associations. Somewhat surprisingly, DLL children instructed in Spanish had higher English receptive vocabulary skills at the end of the Head Start year than those not instructed, with children randomly assigned to Head Start and instructed in Spanish having the highest scores. Policy implications for Head Start-eligible Spanish-speaking DLLs are discussed.

Start-up of NPP Krsko; Pokusno obratovanje NE Krsko

Energy Technology Data Exchange (ETDEWEB)

Spiler, J; Aralica, J [Nuklearna elektrana Krsko, Krsko (Yugoslavia)

1984-07-01

The report describes a review of start-up program and its realisation. There are also described some more significant start-up results with their evaluation. The most significant operation criteria are compared between NPP Krsko and other similar plants in the world. The comparison shows that after the first contractors and operation personnel efforts have been accomplished, our first nuclear power plant is a safe and reliable source of electric power. At the end there are listed NPP Krsko start-up recommendations and experience. (author)

Start-up analysis of INET-5 MW district heating prototype reactor

International Nuclear Information System (INIS)

Li Tianshu

1991-09-01

The main features and thermohydraulic design parameters of the INET-5 MW reactor (INET: Institute of Nuclear Technology of Tsinghua University, Beijing) are presented. The start-up process and the effect of thermohydraulic instability on start-up process have been analyzed. The main obstacle of start-up process of INET-5 MW reactor is to pass the instability region from 1 atm to normal operation condition. For avoiding instability, the start-up process should be divided into two steps. The results of three different start-up proposals calculated by DACOL code are given and compared. The possibility of instabilities for each proposal has been checked. The checked results show that there is no instability during start-up of the three proposals. So, it is supposed that the INET-5 MW reactor can safely and stably reach the operation conditions. Finally, some conclusions about the effect of instability on start-up in boiling mode of INET-5MW reactor are given

Parameters matching requirements for diesel free piston linear alternator start-up

Directory of Open Access Journals (Sweden)

Yan-xiao Li

2015-03-01

Full Text Available It is important to identify the relationship between the starting requirements and the structure parameters of the diesel free piston linear alternator on the structural design stage. In this article, the forces applied on the moving part during the starting process are analyzed, and an oscillation model is established. The numerical simulation results of the oscillation model are presented, and the energy-transfer mechanism is analyzed. Then, the oscillation model is simplified by utilizing the energy balance theory. Expressions of the achieved starting frequency and required starting force are derived and the effects of different design variables on them are investigated. The results show that the achieved compression ratio is determined by the energy balance between the friction consumption and the energy supplied by the starting force. The starting frequency achieved and starting force required are associated with the cylinder bore, the moving mass, and effective stroke of the engine, which can be applied to the matching design and optimization of the prototype.

Position statement: start middle and high schools at 8:30 am or later to promote student health and learning.

Science.gov (United States)

Trevorrow, Tracy; Zhou, Eric S; Dietch, Jessica R; Gonzalez, Brian D

2018-03-13

The Society of Behavioral Medicine recommends school officials start middle and high school classes at 8:30 am or later. Such a schedule promotes students' sleep health, resulting in improvements in physical health, psychological well-being, attention and concentration, academic performance, and driving safety. In this position statement, we propose a four-tiered approach to promote later school start times for middle and high schools.

From Jam to Start-up

DEFF Research Database (Denmark)

Bering Kjæhr, Emil; Lyngbye Hvid Jensen, Jane; Schoenau-Fog, Henrik

2015-01-01

the foundation for new start-up companies. There are, however, an even larger group of very creative and innovative games and artifacts with great potential that go unpublished. This potentially leads to a loss of entrepreneurial opportunities and ultimately the jobs and careers such games could have fostered...

Head Start Center Design Guide.

Science.gov (United States)

Administration for Children, Youth, and Families (DHHS), Washington, DC. Head Start Bureau.

This guide contains suggested criteria for planning, designing, and renovating Head Start centers so that they are safe, child-oriented, developmentally appropriate, beautiful, environmentally sensitive, and functional. The content is based on the U.S. General Services Administration's Child Care Center Design Guide, PBS-P140, which was intended…

Selection on start codons in prokaryotes and potential compensatory nucleotide substitutions.

Science.gov (United States)

Belinky, Frida; Rogozin, Igor B; Koonin, Eugene V

2017-09-29

Reconstruction of the evolution of start codons in 36 groups of closely related bacterial and archaeal genomes reveals purifying selection affecting AUG codons. The AUG starts are replaced by GUG and especially UUG significantly less frequently than expected under the neutral expectation derived from the frequencies of the respective nucleotide triplet substitutions in non-coding regions and in 4-fold degenerate sites. Thus, AUG is the optimal start codon that is actively maintained by purifying selection. However, purifying selection on start codons is significantly weaker than the selection on the same codons in coding sequences, although the switches between the codons result in conservative amino acid substitutions. The only exception is the AUG to UUG switch that is strongly selected against among start codons. Selection on start codons is most pronounced in evolutionarily conserved, highly expressed genes. Mutation of the start codon to a sub-optimal form (GUG or UUG) tends to be compensated by mutations in the Shine-Dalgarno sequence towards a stronger translation initiation signal. Together, all these findings indicate that in prokaryotes, translation start signals are subject to weak but significant selection for maximization of initiation rate and, consequently, protein production.

Getting started with JUCE

CERN Document Server

Robinson, Martin

2013-01-01

his book is a fast-paced, practical guide full of step-by-step examples which are easy to follow and implement.This book is for programmers with a basic grasp of C++. The examples start at a basic level, making few assumptions beyond fundamental C++ concepts. Those without any experience with C++ should be able to follow and construct the examples, although you may need further support to understand the fundamental concepts.

Starting infants on antiretroviral therapy | Clayden | Southern African ...

African Journals Online (AJOL)

5 years or more, that most start at a late stage of the disease, and that mortality in the first few months of treatment remains high.5,6 A recent study shows that starting treatment in early infancy can be lifesaving, and this has informed revisions in World Health Organization (WHO) guidelines7,8 (see WHO 'Dear Health Care ...

Self-starting aerodynamics analysis of vertical axis wind turbine

Directory of Open Access Journals (Sweden)

Jianyang Zhu

2015-12-01

Full Text Available Vertical axis wind turbine is a special type of wind-force electric generator which is capable of working in the complicated wind environment. The self-starting aerodynamics is one of the most important considerations for this kind of turbine. This article aims at providing a systematic synthesis on the self-starting aerodynamic characteristics of vertical axis wind turbine based on the numerical analysis approach. First, the physical model of vertical axis wind turbine and its parameter definitions are presented. Secondary, the interaction model between the vertical axis wind turbine and fluid is developed by using the weak coupling approach; the numerical data of this model are then compared with the wind tunnel experimental data to show its feasibility. Third, the effects of solidity and fixed pitch angle on the self-starting aerodynamic characteristics of the vertical axis wind turbine are analyzed systematically. Finally, the quantification effects of the solidity and fixed pitch angle on the self-starting performance of the turbine can be obtained. The analysis in this study will provide straightforward physical insight into the self-starting aerodynamic characteristics of vertical axis wind turbine.

The GlueX Start Counter and Beam Asymmetry$\\Sigma$ in Single $\\pi^{0}$ Photoproduction

Energy Technology Data Exchange (ETDEWEB)

Pooser, Eric [Florida Intl Univ., Miami, FL (United States)

2016-03-26

The GlueX experiment aims to study meson photoproduction while utilizing the coherent bremsstrahlung technique to produce a 9 GeV linearly polarized photon beam incident on a liquid H₂ target. A Start Counter detector was fabricated to properly identify the accelerator electron beam buckets and to provide accurate timing information. The Start Counter detector was designed to operate at photon intensities of up to 10⁸ γ/s in the coherent peak and provides a timing resolution ~300 ps so as to provide successful identification of the electron beam buckets to within 99% accuracy. Furthermore, the Start Counter detector provides excellent solid angle coverage, ~ 90% of 4π hermeticity, and a high degree of segmentation for background rejection. It consists of a cylindrical array of 30 scintillators with pointed ends that bend towards the beam at the downstream end. Magnetic field insensitive silicon photomultiplier detectors were selected as the readout system. An initial measurement of the beam asymmetry Sigma in the exclusive reaction γ$\\vec{p}$→ π⁰p, where π⁰ → γ has been carried out utilizing the GlueX spectrometer during the Spring 2015 commissioning run. The tagged photon energies ranged from 2.5≤ Eγ ≤ 3.0 GeV in the coherent peak. These measurements were then compared to the world data set and show remarkable agreement with only two hours of physics production running.

Soft start technique for diesel generator sets

International Nuclear Information System (INIS)

Fredlund, Lars

1986-01-01

A diesel motor in a nuclear power plant should be of a well-proven design. It is designed for long periods of trouble-free duty, but not for the frequent and rapid test starts called for by the technical specifications. In order to decrease the dynamic forces and thermal stresses, a soft-start scheme has been implemented. By limiting the fuel injection the diesel generator will reach full speed in appr. 30 seconds. The fuel limiter is a pneumatic cylinder which mechanically limits the travel of the terminal shaft of the governor. (author)

Soft start technique for diesel generator sets

Energy Technology Data Exchange (ETDEWEB)

Fredlund, Lars [Swedish State Power Board, Ringhals Nuclear Power Plant, S-430 22, Vaeroebacka (Sweden)

1986-02-15

A diesel motor in a nuclear power plant should be of a well-proven design. It is designed for long periods of trouble-free duty, but not for the frequent and rapid test starts called for by the technical specifications. In order to decrease the dynamic forces and thermal stresses, a soft-start scheme has been implemented. By limiting the fuel injection the diesel generator will reach full speed in appr. 30 seconds. The fuel limiter is a pneumatic cylinder which mechanically limits the travel of the terminal shaft of the governor. (author)

Software for physical start-up console

International Nuclear Information System (INIS)

Arbet, L.; Suchy, R.

1991-01-01

The physical start-up console comprises an PC AT-based control unit equipped with an 80386 processor, and information input/output units. The basic functions to be fulfilled by the control unit software include data acquisition related to the following parameters: neutron physics properties of the reactor core (neutron fluxes recorded by ionization chambers and reactivity recorded by a digital reactimeter), positions of the reactor core control elements (by the digital position meter) and reactor core control measurements, and technological quantities requisite for evaluating physical start-up tests. The measured and calculated data are shown on the control unit display. The setup of the data acquisition system and of user programs is dealt with, and characteristics of the user processes are briefly described. (Z.S.)

Starting apparatus for internal combustion engines

Science.gov (United States)

Dyches, Gregory M.; Dudar, Aed M.

1997-01-01

An internal combustion engine starting apparatus uses a signal from a curt sensor to determine when the engine is energized and the starter motor should be de-energized. One embodiment comprises a transmitter, receiver, computer processing unit, current sensor and relays to energize a starter motor and subsequently de-energize the same when the engine is running. Another embodiment comprises a switch, current transducer, low-pass filter, gain/comparator, relay and a plurality of switches to energize and de-energize a starter motor. Both embodiments contain an indicator lamp or speaker which alerts an operator as to whether a successful engine start has been achieved. Both embodiments also contain circuitry to protect the starter and to de-energize the engine.

Comparative structural analysis of lipid binding START domains.

Directory of Open Access Journals (Sweden)

Ann-Gerd Thorsell

Full Text Available Steroidogenic acute regulatory (StAR protein related lipid transfer (START domains are small globular modules that form a cavity where lipids and lipid hormones bind. These domains can transport ligands to facilitate lipid exchange between biological membranes, and they have been postulated to modulate the activity of other domains of the protein in response to ligand binding. More than a dozen human genes encode START domains, and several of them are implicated in a disease.We report crystal structures of the human STARD1, STARD5, STARD13 and STARD14 lipid transfer domains. These represent four of the six functional classes of START domains.Sequence alignments based on these and previously reported crystal structures define the structural determinants of human START domains, both those related to structural framework and those involved in ligand specificity.This article can also be viewed as an enhanced version in which the text of the article is integrated with interactive 3D representations and animated transitions. Please note that a web plugin is required to access this enhanced functionality. Instructions for the installation and use of the web plugin are available in Text S1.

Prognosis of bedridden patients with end-stage renal failure after starting hemodialysis.

Science.gov (United States)

Sugaya, Kimio; Hokama, Asanori; Hayashi, Eiri; Naka, Hidekatsu; Oda, Masami; Nishijima, Saori; Miyazato, Minoru; Hokama, Sanehiro; Ogawa, Yoshihide

2007-06-01

The mean age of starting hemodialysis (HD) in patients with end-stage renal failure is gradually increasing in Japan. It is not uncommon for HD to be commenced in bedridden elderly patients who cannot give informed consent, because of brain damage. However, we have not been able to provide useful advice to their families because there was no relevant information available about the prognosis of bedridden patients on HD. Therefore, we examined the prognosis of bedridden HD patients. Two hundred and nineteen patients who received HD were enrolled. These subjects were divided into five groups; (aged or=80 years at the commencement of HD), and we compared the overall prognosis between bedridden and nonbedridden patients, as well as that for each age group. There were 76 bedridden patients among the 219 HD patients, and the main cause of their bedridden state before starting HD was cerebrovascular disease. The 50% survival time after the start of HD was 120 months for the nonbedridden patients versus 56 months for bedridden patients. However, the mean (+/-SD) age of the bedridden patients was higher than that of nonbedridden patients (70 +/- 13 versus 64 +/- 14 years). In patients under age 50 years at the start of dialysis, the survival rate was lower in the bedridden than in the nonbedridden patients, but there were no differences between survival rates for bedridden and nonbedridden patients in the other four age groups. The prognosis of HD patients is poor compared with the general life expectancy of the Japanese population, but whether these patients are bedridden or not has little influence on their survival.

Journal of Chemical Sciences | Indian Academy of Sciences

Indian Academy of Sciences (India)

Silver-based bimetallic Pd/Ag plasmonic catalysts supported on mesoporous silica catalyze the chemoselective reduction of nitrostyrene (NS) to aminostyrene (AS). ... Unit of Elements Strategy Initiative for Catalysts and Batteries, Kyoto University, Katsura, Kyoto 615-8520, Japan; JST, PRESTO, 4-1-8 Honcho, Kawaguchi, ...

Start Where Your Students Are

Science.gov (United States)

Jackson, Robyn R.

2010-01-01

Starting where your students are means understanding how currencies are negotiated and traded in the classroom. Any behavior that students use to acquire the knowledge and skills needed in the classroom functions as currency. Teachers communicate the kinds of currencies they accept in their classrooms, such as getting good grades; students do…

Getting started with Oracle WebLogic Server 12c developer's guide

CERN Document Server

Nunes, Fabio Mazanatti

2013-01-01

Getting Started with Oracle WebLogic Server 12c is a fast-paced and feature-packed book, designed to get you working with Java EE 6, JDK 7 and Oracle WebLogic Server 12c straight away, so start developing your own applications.Getting Started with Oracle WebLogic Server 12c: Developer's Guide is written for developers who are just getting started, or who have some experience, with Java EE who want to learn how to develop for and use Oracle WebLogic Server. Getting Started with Oracle WebLogic Server 12c: Developer's Guide also provides a great overview of the updated features of the 12c releas

Simultaneous measurement of current and temperature distributions in a proton exchange membrane fuel cell during cold start processes

International Nuclear Information System (INIS)

Jiao Kui; Alaefour, Ibrahim E.; Karimi, Gholamreza; Li Xianguo

2011-01-01

Cold start is critical to the commercialization of proton exchange membrane fuel cell (PEMFC) in automotive applications. Dynamic distributions of current and temperature in PEMFC during various cold start processes determine the cold start characteristics, and are required for the optimization of design and operational strategy. This study focuses on an investigation of the cold start characteristics of a PEMFC through the simultaneous measurements of current and temperature distributions. An analytical model for quick estimate of purging duration is also developed. During the failed cold start process, the highest current density is initially near the inlet region of the flow channels, then it moves downstream, reaching the outlet region eventually. Almost half of the cell current is produced in the inlet region before the cell current peaks, and the region around the middle of the cell has the best survivability. These two regions are therefore more important than other regions for successful cold start through design and operational strategy, such as reducing the ice formation and enhancing the heat generation in these two regions. The evolution of the overall current density distribution over time remains similar during the successful cold start process; the current density is the highest near the flow channel inlets and generally decreases along the flow direction. For both the failed and the successful cold start processes, the highest temperature is initially in the flow channel inlet region, and is then around the middle of the cell after the overall peak current density is reached. The ice melting and liquid formation during the successful cold start process have negligible influence on the general current and temperature distributions.

"Ganchulinas" and "Rainbowli" Colors: Young Multilingual Children Play with Language in Head Start Classroom

Science.gov (United States)

Axelrod, Ysaaca

2017-01-01

The purpose of this ethnographic case study was to study the language development of 4-year-old emergent bilinguals in a bilingual (Spanish/English) Head Start classroom with flexible language practices. Data were collected throughout the 10-month school year by visiting the classroom 2-3 times per week. Data include: field notes (observations and…

Design of a data-driven predictive controller for start-up process of AMT vehicles.

Science.gov (United States)

Lu, Xiaohui; Chen, Hong; Wang, Ping; Gao, Bingzhao

2011-12-01

In this paper, a data-driven predictive controller is designed for the start-up process of vehicles with automated manual transmissions (AMTs). It is obtained directly from the input-output data of a driveline simulation model constructed by the commercial software AMESim. In order to obtain offset-free control for the reference input, the predictor equation is gained with incremental inputs and outputs. Because of the physical characteristics, the input and output constraints are considered explicitly in the problem formulation. The contradictory requirements of less friction losses and less driveline shock are included in the objective function. The designed controller is tested under nominal conditions and changed conditions. The simulation results show that, during the start-up process, the AMT clutch with the proposed controller works very well, and the process meets the control objectives: fast clutch lockup time, small friction losses, and the preservation of driver comfort, i.e., smooth acceleration of the vehicle. At the same time, the closed-loop system has the ability to reject uncertainties, such as the vehicle mass and road grade.

LHC Report: Start of intensity ramp-up before a short breather

CERN Multimedia

Mike Lamont for the LHC team

2015-01-01

The first Stable Beams on 3 June were followed, to the accompaniment of thunderstorms, by the start of a phase known as the “intensity ramp-up” which saw the LHC team deliver physics with 50 bunches per beam. Time was also taken for a special five-day run devoted principally to the LHCf experiment. This week (15-19 June) the beam-based programme of the machine and its experiments was stopped temporarily for regular maintenance work.   LHCf’s Arm1 detector. While the first stable colliding beams were delivered with only 3 nominal bunches per beam, the aim of last week’s operations was to start the process of increasing the number of bunches in the beam with an ultimate 2015 target of ~2400 bunches per beam. The number of bunches is gradually increased in well-defined steps. At each step – 3 bunches per beam, then 13, 40 and, finally, 50 – the machine protection team requests 3 fills and around 20 hours of Stable Be...

HF-START: A Regional Radio Propagation Simulator

Science.gov (United States)

Hozumi, K.; Maruyama, T.; Saito, S.; Nakata, H.; Rougerie, S.; Yokoyama, T.; Jin, H.; Tsugawa, T.; Ishii, M.

2017-12-01

HF-START (HF Simulator Targeting for All-users' Regional Telecommunications) is a user-friendly simulator developed to meet the needs of space weather users. Prediction of communications failure due to space weather disturbances is of high priority. Space weather users from various backgrounds with high economic impact, i.e. airlines, telecommunication companies, GPS-related companies, insurance companies, international amateur radio union, etc., recently increase. Space weather information provided by Space Weather Information Center of NICT is, however, too professional to be understood and effectively used by the users. To overcome this issue, I try to translate the research level data to the user level data based on users' needs and provide an immediate usable data. HF-START is positioned to be a space weather product out of laboratory based truly on users' needs. It is originally for radio waves in HF band (3-30 MHz) but higher frequencies up to L band are planned to be covered. Regional ionospheric data in Japan and southeast Asia are employed as a reflector of skywave mode propagation. GAIA (Ground-to-topside model of Atmosphere and Ionosphere for Aeronomy) model will be used as ionospheric input for global simulation. To evaluate HF-START, an evaluation campaign for Japan region will be launched in coming months. If the campaign successes, it will be expanded to southeast Asia region as well. The final goal of HF-START is to provide the near-realtime necessary radio parameters as well as the warning message of radio communications failure to the radio and space weather users.

The Rationality and Irrationality of Financing Green Start-Ups

Directory of Open Access Journals (Sweden)

Linda Bergset

2015-11-01

Full Text Available Green start-ups contribute towards a transition to a more sustainable economy by developing sustainable and environmentally friendly innovation and bringing it to the market. Due to specific product/service characteristics, entrepreneurial motivation and company strategies that might differ from that of other start-ups, these companies might struggle even more than usual with access to finance in the early stages. This conceptual paper seeks to explain these challenges through the theoretical lenses of entrepreneurial finance and behavioural finance. While entrepreneurial finance theory contributes to a partial understanding of green start-up finance, behavioural finance is able to solve a remaining explanatory deficit produced by entrepreneurial finance theory. Although some behavioural finance theorists are suggesting that the current understanding of economic rationality underlying behavioural finance research is inadequate, most scholars have not yet challenged these assumptions, which constrict a comprehensive and realistic description of the reality of entrepreneurial finance in green start-ups. The aim of the paper is thus, first, to explore the specifics of entrepreneurial finance in green start-ups and, second, to demonstrate the need for a more up-to-date conception of rationality in behavioural finance theory in order to enable realistic empirical research in this field.

Cold start-up condition model for heat recovery steam generators

International Nuclear Information System (INIS)

Sindareh-Esfahani, Peyman; Habibi-Siyahposh, Ehsan; Saffar-Avval, Majid; Ghaffari, Ali; Bakhtiari-Nejad, Firooz

2014-01-01

A dynamic modeling of Heat Recovery Steam Generator (HRSG) during cold start-up operation in Combined Cycle Power Plant (CCPP) is introduced. In order to characterize the essential dynamic behavior of the HRSG during cold start-up; Dynamic equations of all HRSG's components are developed based on energy and mass balances. To describe precisely the operation of HRSG; a method based on nonlinear estimated functions for thermodynamic properties is applied to estimate the model parameters. Model parameters are evaluated by a designed algorithm based on Genetic Algorithm (GA). A wide set of experimental data is used to validate HRSG model during cold start-up operation. The simulation results show the reliability and validity of the developed model for cold start-up operation. - Highlights: •Presenting a mathematical model for HRSGs cold start-up based on energy and mass balances. •A designed parameter identification algorithm based on GA is presented. •Application of experimental data in order to model and validate simulation results

Views of general practitioners on the use of STOPP&START in primary care: a qualitative study.

Science.gov (United States)

Dalleur, O; Feron, J-M; Spinewine, A

2014-08-01

STOPP (Screening Tool of Older Person's Prescriptions) and START (Screening Tool to Alert Doctors to Right Treatment) criteria aim at detecting potentially inappropriate prescribing in older people. The objective was to explore general practitioners' (GPs) perceptions regarding the use of the STOPP&START tool in their practice. We conducted three focus groups which were conveniently sampled. Vignettes with clinical cases were provided for discussion as well as a full version of the STOPP&START tool. Knowledge, strengths and weaknesses of the tool and its implementation were discussed. Two researchers independently performed content analysis, classifying quotes and creating new categories for emerging themes. Discussions highlighted incentives (e.g. systematic procedure for medication review) and barriers (e.g. time-consuming application) influencing the use of STOPP&START in primary care. Usefulness, comprehensiveness, and relevance of the tool were also questioned. Another important category emerging from the content analysis was the projected use of the tool. The GPs imagined key elements for the implementation in daily practice: computerized clinical decision support system, education, and multidisciplinary collaborations, especially at care transitions and in nursing homes. Despite variables views on the usefulness, comprehensiveness, and relevance of STOPP&START, GPs suggest the implementation of this tool in primary care within computerized clinical decision support systems, through education, and used as part of multidisciplinary collaborations.

Starting a nursing consultation practice.

Science.gov (United States)

Schulmeister, L

1999-03-01

Because the clinical nurse specialist (CNS) role has been changed or eliminated in many hospital organizations, many CNSs in career transition are considering establishing collaborative or independent nursing consultation practices. Opportunities for consultants exist in diverse practice settings and specialties. Before starting a consultation practice, the CNS should carefully examine goals, identify resources, and begin contacting potential referral sources. He or she must also decide what form of business organization to establish and write a business plan to solidify ideas and prepare for the unexpected. Most CNS consultants rely on personal savings to cover initial business and personal expenses, and many continue working as a CNS until the consultation practice is established. Fees can be set based on community standards, what the market will bear, desired projected income, or a third-party payor's fee schedule. The consultation practice can be marketed by word of mouth, inexpensive advertising techniques such as distributing flyers and business cards, direct mall, and media advertising. In today's healthcare marketplace, opportunities abound for the CNS risk-taker interested in starting a nursing consultation practice.

Getting started with Microsoft Lync server 2013

CERN Document Server

Volpe, Fabrizio

2013-01-01

This book has a practical approach with a lot of step-by-step guides and explanations as to where and why we're doing the various operations.Getting Started with Microsoft Lync Server 2013 is a starting point for system administrators, IT pros, unified communication technicians, and decision makers in companies or in the consultancy business. For people who have never managed Lync (or a U.C. product), the book will guide you through the basic concepts and mistakes. If you are already managing a Lync deployment you will find important explanations and ideas put together in a single text. If you

Entrepreneur How to Start an Online Business

CERN Document Server

Tobin, Lucy

2012-01-01

The secrets of the UK’s biggest online entrepreneurs revealed   Thinking of starting a business? Already have a business online and looking to take it to the next level? The wonderful world wide web has made creating a start-up that much easier. Thousands of people are out there reaping the rewards the web can bring. If you want to join them, you’ve come to the right place.  Profiling today’s foremost web entrepreneurs, Lucy Tobin - who meets successful business founders every week writing an enterprise column for The Evening Standard – takes us throug

13 CFR 305.11 - Contract awards; early construction start.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Contract awards; early construction start. 305.11 Section 305.11 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION... § 305.11 Contract awards; early construction start. EDA must determine that the award of all contracts...

Experimental investigation of open circuit voltage during start-up process of HT-PEMFC

International Nuclear Information System (INIS)

Abdul Rasheed, Raj Kamal; Chan, Siew Hwa

2015-01-01

Highlights: • OCV reduces non-linearly with temperature under constant power input. • The reduction gradient of OCV is observed to be non-linear with time. • Nernst equation is less accurate for HT-PEMFC start-up models. - Abstract: This paper investigates the open circuit voltage (OCV) during the warm-up process of a high temperature proton exchange membrane fuel cell (HT-PEMFC) from 140 °C to the desired temperature of 180 °C, where the temperature increases with time. The heating strategy involves the external heating of the fuel cell with constant heat input rate. The commonly used Nernst equation, to predict the OCV of the fuel cell, is usually used in transient start-up models. Thus, this papers highlights the limitations of using the Nernst equation where the temperature increases transiently with time. A polybenzimidazole-based HTPEM single cell was set up and the OCV was measured under constant heating power supplied by an external source. A parametric study was done by varying the external heating power and the effect on the OCV was observed. The results showed that the OCV reduces non-linearly with respect to temperature, when the fuel cell is subjected to a constant heating power. This behaviour is clearly in contrast with the Nernst equation, which considers the temperature as steady state. For effective comparison, the OCV was also measured under steady state temperatures, showing an almost constant reduction gradient of ∼ −2.3×10 −4 V/°C. However, the behaviour under a constant heating power show curvilinear reduction of the OCV as the temperature increases. In addition, as the external heating power is increased, the degree of curvature of the OCV profile is greater. Thus, the results clearly indicate that the accuracy of using the Nernst equation in transient thermal start-up models can be improved, by considering a non linear behaviour, as shown in this paper.

Method of starting internal pumps of a nuclear reactor

International Nuclear Information System (INIS)

Kumagami, Shoji.

1985-01-01

Purpose: To reduce the noise effects by decreasing the invading current into the main line upon starting an internal pump type nuclear reactor adapted to forcively recycle the reactor water by a plurality of internal pumps. Method: A plurality of internal pumps are divided into several groups and, upon starting pumps belonging to the individual unit group, the starting instances for the respective pumps are deviated to reduce the surges applied to the main line and suppress the invading current lower to reduce the earth noises. As a result, effects caused to other devices or equipments can be moderated to improve the reliability. Furthermore, by actuating the respective pumps on every group units in a starting pattern along the orthogonal line, flow rate distribution in the reactor can be balanced. Then, the instability region during low rotation of pumps, that is, instability of the flow rate near the resonance frequency can be decreased. (Kawakami, Y.)

Fast Thorium Molten Salt Reactors Started with Plutonium

International Nuclear Information System (INIS)

Merle-Lucotte, E.; Heuer, D.; Le Brun, C.; Brissot, R.; Liatard, E.; Meplan, O.; Nuttin, A.; Mathieu, L.

2006-01-01

One of the pending questions concerning Molten Salt Reactors based on the 232 Th/ 233 U fuel cycle is the supply of the fissile matter, and as a consequence the deployment possibilities of a fleet of Molten Salt Reactors, since 233 U does not exist on earth and is not yet produced in the current operating reactors. A solution may consist in producing 233 U in special devices containing Thorium, in Pressurized Water or Fast Neutrons Reactors. Two alternatives to produce 233 U are examined here: directly in standard Molten Salt Reactors started with Plutonium as fissile matter and then operated in the Th/ 233 U cycle; or in dedicated Molten Salt Reactors started and fed with Plutonium as fissile matter and Thorium as fertile matter. The idea is to design a critical reactor able to burn the Plutonium and the minor actinides presently produced in PWRs, and consequently to convert this Plutonium into 233 U. A particular reactor configuration is used, called 'unique channel' configuration in which there is no moderator in the core, leading to a quasi fast neutron spectrum, allowing Plutonium to be used as fissile matter. The conversion capacities of such Molten Salt Reactors are excellent. For Molten Salt Reactors only started with Plutonium, the assets of the Thorium fuel cycle turn out to be quickly recovered and the reactor's characteristics turn out to be equivalent to Molten Salt Reactors operated with 233 U only. Using a combination of Molten Salt Reactors started or operated with Plutonium and of Molten Salt Reactors started with 233 U, the deployment capabilities of these reactors fully satisfy the condition of sustainability. (authors)

Getting started with OrientDB

CERN Document Server

Tesoriero, Claudio

2013-01-01

A standard tutorial aimed at making you an OrientDB expert, through the use of practical examples, explained in a step-by-step format.Getting Started with OrientDB 1.3.0 is great for database designers, developers, and systems engineers. It is assumed that you are familiar with NoSQL concepts, Java, and networking principles.

Time machine tales the science fiction adventures and philosophical puzzles of time travel

CERN Document Server

Nahin, Paul J

2017-01-01

This book contains a broad overview of time travel in science fiction, along with a detailed examination of the philosophical implications of time travel. The emphasis of this book is now on the philosophical and on science fiction, rather than on physics, as in the author's earlier books on the subject. In that spirit there are, for example, no Tech Notes filled with algebra, integrals, and differential equations, as there are in the first and second editions of TIME MACHINES. Writing about time travel is, today, a respectable business. It hasn’t always been so. After all, time travel, prima facie, appears to violate a fundamental law of nature; every effect has a cause, with the cause occurring before the effect. Time travel to the past, however, seems to allow, indeed to demand, backwards causation, with an effect (the time traveler emerging into the past as he exits from his time machine) occurring before its cause (the time traveler pushing the start button on his machine’s control panel to start his...

Decision Enhancement Services for Small and Medium Enterprise Start-Ups in Uganda

NARCIS (Netherlands)

Sol, H G; Basaza, Habinka; Sprague, Ralph H.

2012-01-01

While start-up firms create a substantial economic impact on most economies, the failure rate of start-up firms seems to remain high due to inadequate agile decision services. Deciding to start-up mining Small and Medium Enterprises (SME) is a challenging task in Uganda. Research on SME start-up

New start-up channels and multichannel analyzer at the RB reactor; Novi start-up kanali i videkanalni analizator na reaktoru Rb

Energy Technology Data Exchange (ETDEWEB)

Sotic, O; Markovic, H; Vranic, S; Dimitrijevic, Z; Pesic, M [Boris Kidric Institute of Nuclear Sciences Vinca, Beograd (Yugoslavia)

1978-01-15

New start-up channels and a multichannel analyzer were purchased in 1977 for the RB reactor. Both start-up channels contain BF{sub 3} neutron detectors, preamplifier, amplifier, single-channel analyzer, scaler, ratemeter, control unit, recording instrument. This document contains detailed technical description of these devices as well as characteristics of the multichannel analyzer which is being tested and will be used for measuring irradiation in the vicinity of the reactor.